FUN3D Grid Refinement and Adaptation Studies for the Ares Launch Vehicle

NASA Technical Reports Server (NTRS)

Bartels, Robert E.; Vasta, Veer; Carlson, Jan-Renee; Park, Mike; Mineck, Raymond E.

2010-01-01

This paper presents grid refinement and adaptation studies performed in conjunction with computational aeroelastic analyses of the Ares crew launch vehicle (CLV). The unstructured grids used in this analysis were created with GridTool and VGRID while the adaptation was performed using the Computational Fluid Dynamic (CFD) code FUN3D with a feature based adaptation software tool. GridTool was developed by ViGYAN, Inc. while the last three software suites were developed by NASA Langley Research Center. The feature based adaptation software used here operates by aligning control volumes with shock and Mach line structures and by refining/de-refining where necessary. It does not redistribute node points on the surface. This paper assesses the sensitivity of the complex flow field about a launch vehicle to grid refinement. It also assesses the potential of feature based grid adaptation to improve the accuracy of CFD analysis for a complex launch vehicle configuration. The feature based adaptation shows the potential to improve the resolution of shocks and shear layers. Further development of the capability to adapt the boundary layer and surface grids of a tetrahedral grid is required for significant improvements in modeling the flow field.

Trades Between Opposition and Conjunction Class Trajectories for Early Human Missions to Mars

NASA Technical Reports Server (NTRS)

Mattfeld, Bryan; Stromgren, Chel; Shyface, Hilary; Komar, David R.; Cirillo, William; Goodliff, Kandyce

2014-01-01

Candidate human missions to Mars, including NASA's Design Reference Architecture 5.0, have focused on conjunction-class missions with long crewed durations and minimum energy trajectories to reduce total propellant requirements and total launch mass. However, in order to progressively reduce risk and gain experience in interplanetary mission operations, it may be desirable that initial human missions to Mars, whether to the surface or to Mars orbit, have shorter total crewed durations and minimal stay times at the destination. Opposition-class missions require larger total energy requirements relative to conjunction-class missions but offer the potential for much shorter mission durations, potentially reducing risk and overall systems performance requirements. This paper will present a detailed comparison of conjunction-class and opposition-class human missions to Mars vicinity with a focus on how such missions could be integrated into the initial phases of a Mars exploration campaign. The paper will present the results of a trade study that integrates trajectory/propellant analysis, element design, logistics and sparing analysis, and risk assessment to produce a comprehensive comparison of opposition and conjunction exploration mission constructs. Included in the trade study is an assessment of the risk to the crew and the trade offs between the mission duration and element, logistics, and spares mass. The analysis of the mission trade space was conducted using four simulation and analysis tools developed by NASA. Trajectory analyses for Mars destination missions were conducted using VISITOR (Versatile ImpulSive Interplanetary Trajectory OptimizeR), an in-house tool developed by NASA Langley Research Center. Architecture elements were evaluated using EXploration Architecture Model for IN-space and Earth-to-orbit (EXAMINE), a parametric modeling tool that generates exploration architectures through an integrated systems model. Logistics analysis was conducted using NASA's Human Exploration Logistics Model (HELM), and sparing allocation predictions were generated via the Exploration Maintainability Analysis Tool (EMAT), which is a probabilistic simulation engine that evaluates trades in spacecraft reliability and sparing requirements based on spacecraft system maintainability and reparability.

Positional reference system for ultraprecision machining

DOEpatents

Arnold, Jones B.; Burleson, Robert R.; Pardue, Robert M.

1982-01-01

A stable positional reference system for use in improving the cutting tool-to-part contour position in numerical controlled-multiaxis metal turning machines is provided. The reference system employs a plurality of interferometers referenced to orthogonally disposed metering bars which are substantially isolated from machine strain induced position errors for monitoring the part and tool positions relative to the metering bars. A microprocessor-based control system is employed in conjunction with the plurality of position interferometers and part contour description data inputs to calculate error components for each axis of movement and output them to corresponding axis drives with appropriate scaling and error compensation. Real-time position control, operating in combination with the reference system, makes possible the positioning of the cutting points of a tool along a part locus with a substantially greater degree of accuracy than has been attained previously in the art by referencing and then monitoring only the tool motion relative to a reference position located on the machine base.

Positional reference system for ultraprecision machining

DOEpatents

Arnold, J.B.; Burleson, R.R.; Pardue, R.M.

1980-09-12

A stable positional reference system for use in improving the cutting tool-to-part contour position in numerical controlled-multiaxis metal turning machines is provided. The reference system employs a plurality of interferometers referenced to orthogonally disposed metering bars which are substantially isolated from machine strain induced position errors for monitoring the part and tool positions relative to the metering bars. A microprocessor-based control system is employed in conjunction with the plurality of positions interferometers and part contour description data input to calculate error components for each axis of movement and output them to corresponding axis driven with appropriate scaling and error compensation. Real-time position control, operating in combination with the reference system, makes possible the positioning of the cutting points of a tool along a part locus with a substantially greater degree of accuracy than has been attained previously in the art by referencing and then monitoring only the tool motion relative to a reference position located on the machine base.

Improving inflammatory arthritis management through tighter monitoring of patients and the use of innovative electronic tools

PubMed Central

van Riel, Piet; Combe, Bernard; Abdulganieva, Diana; Bousquet, Paola; Courtenay, Molly; Curiale, Cinzia; Gómez-Centeno, Antonio; Haugeberg, Glenn; Leeb, Burkhard; Puolakka, Kari; Ravelli, Angelo; Rintelen, Bernhard; Sarzi-Puttini, Piercarlo

2016-01-01

Treating to target by monitoring disease activity and adjusting therapy to attain remission or low disease activity has been shown to lead to improved outcomes in chronic rheumatic diseases such as rheumatoid arthritis and spondyloarthritis. Patient-reported outcomes, used in conjunction with clinical measures, add an important perspective of disease activity as perceived by the patient. Several validated PROs are available for inflammatory arthritis, and advances in electronic patient monitoring tools are helping patients with chronic diseases to self-monitor and assess their symptoms and health. Frequent patient monitoring could potentially lead to the early identification of disease flares or adverse events, early intervention for patients who may require treatment adaptation, and possibly reduced appointment frequency for those with stable disease. A literature search was conducted to evaluate the potential role of patient self-monitoring and innovative monitoring of tools in optimising disease control in inflammatory arthritis. Experience from the treatment of congestive heart failure, diabetes and hypertension shows improved outcomes with remote electronic self-monitoring by patients. In inflammatory arthritis, electronic self-monitoring has been shown to be feasible in patients despite manual disability and to be acceptable to older patients. Patients' self-assessment of disease activity using such methods correlates well with disease activity assessed by rheumatologists. This review also describes several remote monitoring tools that are being developed and used in inflammatory arthritis, offering the potential to improve disease management and reduce pressure on specialists. PMID:27933206

Conjunctive programming: An interactive approach to software system synthesis

NASA Technical Reports Server (NTRS)

Tausworthe, Robert C.

1992-01-01

This report introduces a technique of software documentation called conjunctive programming and discusses its role in the development and maintenance of software systems. The report also describes the conjoin tool, an adjunct to assist practitioners. Aimed at supporting software reuse while conforming with conventional development practices, conjunctive programming is defined as the extraction, integration, and embellishment of pertinent information obtained directly from an existing database of software artifacts, such as specifications, source code, configuration data, link-edit scripts, utility files, and other relevant information, into a product that achieves desired levels of detail, content, and production quality. Conjunctive programs typically include automatically generated tables of contents, indexes, cross references, bibliographic citations, tables, and figures (including graphics and illustrations). This report presents an example of conjunctive programming by documenting the use and implementation of the conjoin program.

Cognitive simulation as a tool for cognitive task analysis.

PubMed

Roth, E M; Woods, D D; Pople, H E

1992-10-01

Cognitive simulations are runnable computer programs that represent models of human cognitive activities. We show how one cognitive simulation built as a model of some of the cognitive processes involved in dynamic fault management can be used in conjunction with small-scale empirical data on human performance to uncover the cognitive demands of a task, to identify where intention errors are likely to occur, and to point to improvements in the person-machine system. The simulation, called Cognitive Environment Simulation or CES, has been exercised on several nuclear power plant accident scenarios. Here we report one case to illustrate how a cognitive simulation tool such as CES can be used to clarify the cognitive demands of a problem-solving situation as part of a cognitive task analysis.

AVO helps seismic imaging in deepwater environments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Skidmore, C.; Lindsay, R.O.; Ratcliff, D.

1997-11-03

Amplitude and frequency variations related to offset should be analyzed routinely during interpretation of seismic data acquired in deepwater environments. Amplitude variation with offset (AVO) in three dimensions is the key exploration tool in deep waters of the Gulf of Mexico. But application of the tool requires special care. Three-dimensional AVO helps the interpreter understand stratigraphy and the meaning of amplitude anomalies. Used in conjunction with well log data, it can help the interpreter distinguish amplitudes related to the presence of hydrocarbons from those that result from, for example, rock-property changes within a non-hydrocarbon-bearing layer, such as a shale, ormore » residual gas (fizz water) in high-porosity sands. The paper discusses examples from the Gulf of Mexico, will control application, improving detail, and frequency-dependent analysis.« less

Progress in Modeling and Simulation of Batteries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Turner, John A

2016-01-01

Modeling and simulation of batteries, in conjunction with theory and experiment, are important research tools that offer opportunities for advancement of technologies that are critical to electric motors. The development of data from the application of these tools can provide the basis for managerial and technical decision-making. Together, these will continue to transform batteries for electric vehicles. This collection of nine papers presents the modeling and simulation of batteries and the continuing contribution being made to this impressive progress, including topics that cover: * Thermal behavior and characteristics * Battery management system design and analysis * Moderately high-fidelity 3D capabilitiesmore » * Optimization Techniques and Durability As electric vehicles continue to gain interest from manufacturers and consumers alike, improvements in economy and affordability, as well as adoption of alternative fuel sources to meet government mandates are driving battery research and development. Progress in modeling and simulation will continue to contribute to battery improvements that deliver increased power, energy storage, and durability to further enhance the appeal of electric vehicles.« less

A measurement theory of illusory conjunctions.

PubMed

Prinzmetal, William; Ivry, Richard B; Beck, Diane; Shimizu, Naomi

2002-04-01

Illusory conjunctions refer to the incorrect perceptual combination of correctly perceived features, such as color and shape. Research on the phenomenon has been hampered by the lack of a measurement theory that accounts for guessing features, as well as the incorrect combination of correctly perceived features. Recently, several investigators have suggested using multinomial models as a tool for measuring feature integration. The authors examined the adequacy of these models in 2 experiments by testing whether model parameters reflect changes in stimulus factors. In a third experiment, confidence ratings were used as a tool for testing the model. Multinomial models accurately reflected both variations in stimulus factors and observers' trial-by-trial confidence ratings.

Rapid and long-lasting learning of feature binding

PubMed Central

Yashar, Amit; Carrasco, Marisa

2016-01-01

How are features integrated (bound) into objects and how can this process be facilitated? Here we investigated the role of rapid perceptual learning in feature binding and its long-lasting effects. By isolating the contributions of individual features from their conjunctions between training and test displays, we demonstrate for the first time that training can rapidly and substantially improve feature binding. Observers trained on a conjunction search task consisting of a rapid display with one target-conjunction, then tested with a new target-conjunction. Features were the same between training and test displays. Learning transferred to the new target when its conjunction was presented as a distractor, but not when only its component features were presented in different conjunction distractors during training. Training improvement lasted for up to 16 months, but, in all conditions, it was specific to the trained target. Our findings suggest that with short training observers’ ability to bind two specific features into an object is improved, and that this learning effect can last for over a year. Moreover, our findings show that while the short-term learning effect reflects activation of presented items and their binding, long-term consolidation is task specific. PMID:27289484

DEMONSTRATION BULLETIN: RAPID OPTICAL SCREEN TOOL (ROST™) - LORAL CORPORATION

EPA Science Inventory

The Loral Rapid Optical Screen Tool (ROST™) is a tunable dye laser system used for the detection of petroleum, semi-volatile, and some volatile organic compounds in soils. The technology is used in conjunction with a cone penetrometer (CP).

Low Conductivity Thermal Barrier Coatings

NASA Technical Reports Server (NTRS)

Zhu, Dong-Ming

2005-01-01

Thermal barrier coatings will be more aggressively designed to protect gas turbine engine hot-section components in order to meet future engine higher fuel efficiency and lower emission goals. In this presentation, thermal barrier coating development considerations and requirements will be discussed. An experimental approach is established to monitor in real time the thermal conductivity of the coating systems subjected to high-heat-flux, steady-state and cyclic temperature gradients. Advanced low conductivity thermal barrier coatings have also been developed using a multi-component defect clustering approach, and shown to have improved thermal stability. The durability and erosion resistance of low conductivity thermal barrier coatings have been improved utilizing advanced coating architecture design, composition optimization, in conjunction with more sophisticated modeling and design tools.

Evaluating and Refining High Throughput Tools for Toxicokinetics

EPA Science Inventory

This poster summarizes efforts of the Chemical Safety for Sustainability's Rapid Exposure and Dosimetry (RED) team to facilitate the development and refinement of toxicokinetics (TK) tools to be used in conjunction with the high throughput toxicity testing data generated as a par...

Exploration of Epistemological Beliefs in a Summer Science Program for High Achieving Students(1)

NASA Astrophysics Data System (ADS)

Cormier, Sebastien; Raia, F.; Steinberg, R.

2006-12-01

We will describe changes in epistemology of students in a comprehensive summer science program for high achieving students at City College New York. The program focuses on having students participate in the process of scientific discovery using inquiry based activities such as the astronomy units from Physics by Inquiry(2). Multiple tools were used throughout the program to study student epistemological beliefs about science. We administered a Likert scale survey about how science is done as well as multiple content questions from which student beliefs were inferred. Instructor perspectives on student epistemologies are used in conjunction with these tools to study improvements and correlations between the different measures. (1) Supported in part by the National Science Foundation (2) Physics by Inquiry, L.C. McDermott, John Wiley & Sons, Inc., New York, 1996

Development and Validation of the Controller Acceptance Rating Scale (CARS): Results of Empirical Research

NASA Technical Reports Server (NTRS)

Lee, Katharine K.; Kerns, Karol; Bone, Randall

2001-01-01

The measurement of operational acceptability is important for the development, implementation, and evolution of air traffic management decision support tools. The Controller Acceptance Rating Scale was developed at NASA Ames Research Center for the development and evaluation of the Passive Final Approach Spacing Tool. CARS was modeled after a well-known pilot evaluation rating instrument, the Cooper-Harper Scale, and has since been used in the evaluation of the User Request Evaluation Tool, developed by MITRE's Center for Advanced Aviation System Development. In this paper, we provide a discussion of the development of CARS and an analysis of the empirical data collected with CARS to examine construct validity. Results of intraclass correlations indicated statistically significant reliability for the CARS. From the subjective workload data that were collected in conjunction with the CARS, it appears that the expected set of workload attributes was correlated with the CARS. As expected, the analysis also showed that CARS was a sensitive indicator of the impact of decision support tools on controller operations. Suggestions for future CARS development and its improvement are also provided.

Perspectives on Wellness Self-Monitoring Tools for Older Adults

PubMed Central

Huh, Jina; Le, Thai; Reeder, Blaine; Thompson, Hilaire J.; Demiris, George

2013-01-01

Purpose Our purpose was to understand different stakeholder perceptions about the use of self-monitoring tools, specifically in the area of older adults’ personal wellness. In conjunction with the advent of personal health records, tracking personal health using self-monitoring technologies shows promising patient support opportunities. While clinicians’ tools for monitoring of older adults have been explored, we know little about how older adults may self-monitor their wellness and health and how their health care providers would perceive such use. Methods We conducted three focus groups with health care providers (n=10) and four focus groups with community-dwelling older adults (n=31). Results Older adult participants’ found the concept of self-monitoring unfamiliar and this influenced a narrowed interest in the use of wellness self-monitoring tools. On the other hand, health care provider participants showed open attitudes towards wellness monitoring tools for older adults and brainstormed about various stakeholders’ use cases. The two participant groups showed diverging perceptions in terms of: perceived uses, stakeholder interests, information ownership and control, and sharing of wellness monitoring tools. Conclusions Our paper provides implications and solutions for how older adults’ wellness self-monitoring tools can enhance patient-health care provider interaction, patient education, and improvement in overall wellness. PMID:24041452

Perspectives on wellness self-monitoring tools for older adults.

PubMed

Huh, Jina; Le, Thai; Reeder, Blaine; Thompson, Hilaire J; Demiris, George

2013-11-01

Our purpose was to understand different stakeholder perceptions about the use of self-monitoring tools, specifically in the area of older adults' personal wellness. In conjunction with the advent of personal health records, tracking personal health using self-monitoring technologies shows promising patient support opportunities. While clinicians' tools for monitoring of older adults have been explored, we know little about how older adults may self-monitor their wellness and health and how their health care providers would perceive such use. We conducted three focus groups with health care providers (n=10) and four focus groups with community-dwelling older adults (n=31). Older adult participants' found the concept of self-monitoring unfamiliar and this influenced a narrowed interest in the use of wellness self-monitoring tools. On the other hand, health care provider participants showed open attitudes toward wellness monitoring tools for older adults and brainstormed about various stakeholders' use cases. The two participant groups showed diverging perceptions in terms of: perceived uses, stakeholder interests, information ownership and control, and sharing of wellness monitoring tools. Our paper provides implications and solutions for how older adults' wellness self-monitoring tools can enhance patient-health care provider interaction, patient education, and improvement in overall wellness. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Software Tools for Weed Seed Germination Modeling

USDA-ARS?s Scientific Manuscript database

The next generation of weed seed germination models will need to account for variable soil microclimate conditions. In order to predict this microclimate environment we have developed a suite of individual tools (models) that can be used in conjunction with the next generation of weed seed germinati...

Short-term perceptual learning in visual conjunction search.

PubMed

Su, Yuling; Lai, Yunpeng; Huang, Wanyi; Tan, Wei; Qu, Zhe; Ding, Yulong

2014-08-01

Although some studies showed that training can improve the ability of cross-dimension conjunction search, less is known about the underlying mechanism. Specifically, it remains unclear whether training of visual conjunction search can successfully bind different features of separated dimensions into a new function unit at early stages of visual processing. In the present study, we utilized stimulus specificity and generalization to provide a new approach to investigate the mechanisms underlying perceptual learning (PL) in visual conjunction search. Five experiments consistently showed that after 40 to 50 min of training of color-shape/orientation conjunction search, the ability to search for a certain conjunction target improved significantly and the learning effects did not transfer to a new target that differed from the trained target in both color and shape/orientation features. However, the learning effects were not strictly specific. In color-shape conjunction search, although the learning effect could not transfer to a same-shape different-color target, it almost completely transferred to a same-color different-shape target. In color-orientation conjunction search, the learning effect partly transferred to a new target that shared same color or same orientation with the trained target. Moreover, the sum of transfer effects for the same color target and the same orientation target in color-orientation conjunction search was algebraically equivalent to the learning effect for trained target, showing an additive transfer effect. The different transfer patterns in color-shape and color-orientation conjunction search learning might reflect the different complexity and discriminability between feature dimensions. These results suggested a feature-based attention enhancement mechanism rather than a unitization mechanism underlying the short-term PL of color-shape/orientation conjunction search.

MODFLOW-OWHM v2: New Features and Improvements; The Next Generation of MODFLOW Conjunctive Use Simulation

NASA Astrophysics Data System (ADS)

Boyce, S. E.; Hanson, R. T.; Henson, W.; Ferguson, I. M.; Schmid, W.; Reimann, T.; Mehl, S.

2017-12-01

The One-Water Hydrologic Flow Model (One-Water) is a MODFLOW-based integrated hydrologic flow model designed for the analysis of a broad range of conjunctive-use and sustainability issues. It was motivated by the need to merge the multiple variants of MODFLOW-2005 to yield an enhanced unified version capable of simulating conjunctive use and management, sustainability, climate-related issues, and managing the relationships between groundwater, surface water, and land usage. One-Water links the movement and use of groundwater, surface water, and imported water for consumption by agriculture and natural vegetation on the landscape, and for potable and other uses within a supply-and-demand framework. The first version, released in 2014, was selected by The World Bank Water Resource Software Review in 2016 as one of three recommended simulation programs for conjunctive use and management modeling. One-Water is also being used as the primary simulation engine for FREEWAT, a European Union sponsored open-source water management software environment. The next version of One-Water will include a new surface-water operations module that simulates dynamic reservoir operations and a conduit-flow process for karst aquifers and leaky pipe networks. It will also include enhancements to local grid refinement, and additional features to facilitate easier model updates, faster execution, better error messages, and more integration/cross communication between the traditional MODFLOW packages. The new structure also helps facilitate the new integration into a "Self-Updating" structure of data streams, simulation, and analysis needed for modern water resource management. By retaining and tracking the water within the hydrosphere, One-Water accounts for "all of the water everywhere and all of the time." This philosophy provides more confidence in the water accounting to the scientific community and provides the public a foundation needed to address wider classes of problems. Ultimately, more complex questions are being asked about water resources, requiring tools that more completely answer conjunctive-use management questions.

Using Computational Modeling to Assess the Impact of Clinical Decision Support on Cancer Screening within Community Health Centers

PubMed Central

Carney, Timothy Jay; Morgan, Geoffrey P.; Jones, Josette; McDaniel, Anna M.; Weaver, Michael; Weiner, Bryan; Haggstrom, David A.

2014-01-01

Our conceptual model demonstrates our goal to investigate the impact of clinical decision support (CDS) utilization on cancer screening improvement strategies in the community health care (CHC) setting. We employed a dual modeling technique using both statistical and computational modeling to evaluate impact. Our statistical model used the Spearman’s Rho test to evaluate the strength of relationship between our proximal outcome measures (CDS utilization) against our distal outcome measure (provider self-reported cancer screening improvement). Our computational model relied on network evolution theory and made use of a tool called Construct-TM to model the use of CDS measured by the rate of organizational learning. We employed the use of previously collected survey data from community health centers Cancer Health Disparities Collaborative (HDCC). Our intent is to demonstrate the added valued gained by using a computational modeling tool in conjunction with a statistical analysis when evaluating the impact a health information technology, in the form of CDS, on health care quality process outcomes such as facility-level screening improvement. Significant simulated disparities in organizational learning over time were observed between community health centers beginning the simulation with high and low clinical decision support capability. PMID:24953241

Getting the Best out of Excel

ERIC Educational Resources Information Center

Heys, Chris

2008-01-01

Excel, Microsoft's spreadsheet program, offers several tools which have proven useful in solving some optimization problems that arise in operations research. We will look at two such tools, the Excel modules called Solver and Goal Seek--this after deriving an equation, called the "cash accumulation equation", to be used in conjunction with them.

Can transcranial electrical stimulation improve learning difficulties in atypical brain development? A future possibility for cognitive training☆

PubMed Central

Krause, Beatrix; Cohen Kadosh, Roi

2013-01-01

Learning difficulties in atypical brain development represent serious obstacles to an individual's future achievements and can have broad societal consequences. Cognitive training can improve learning impairments only to a certain degree. Recent evidence from normal and clinical adult populations suggests that transcranial electrical stimulation (TES), a portable, painless, inexpensive, and relatively safe neuroenhancement tool, applied in conjunction with cognitive training can enhance cognitive intervention outcomes. This includes, for instance, numerical processing, language skills and response inhibition deficits commonly associated with profound learning difficulties and attention-deficit hyperactivity disorder (ADHD). The current review introduces the functional principles, current applications and promising results, and potential pitfalls of TES. Unfortunately, research in child populations is limited at present. We suggest that TES has considerable promise as a tool for increasing neuroplasticity in atypically developing children and may be an effective adjunct to cognitive training in clinical settings if it proves safe. The efficacy and both short- and long-term effects of TES on the developing brain need to be critically assessed before it can be recommended for clinical settings. PMID:23770059

Effects of tools inserted through snake-like surgical manipulators.

PubMed

Murphy, Ryan J; Otake, Yoshito; Wolfe, Kevin C; Taylor, Russell H; Armand, Mehran

2014-01-01

Snake-like manipulators with a large, open lumen can offer improved treatment alternatives for minimally-and less-invasive surgeries. In these procedures, surgeons use the manipulator to introduce and control flexible tools in the surgical environment. This paper describes a predictive algorithm for estimating manipulator configuration given tip position for nonconstant curvature, cable-driven manipulators using energy minimization. During experimental bending of the manipulator with and without a tool inserted in its lumen, images were recorded from an overhead camera in conjunction with actuation cable tension and length. To investigate the accuracy, the estimated manipulator configuration from the model and the ground-truth configuration measured from the image were compared. Additional analysis focused on the response differences for the manipulator with and without a tool inserted through the lumen. Results indicate that the energy minimization model predicts manipulator configuration with an error of 0.24 ± 0.22mm without tools in the lumen and 0.24 ± 0.19mm with tools in the lumen (no significant difference, p = 0.81). Moreover, tools did not introduce noticeable perturbations in the manipulator trajectory; however, there was an increase in requisite force required to reach a configuration. These results support the use of the proposed estimation method for calculating the shape of the manipulator with an tool inserted in its lumen when an accuracy range of at least 1mm is required.

Space Situational Awareness in the Joint Space Operations Center

NASA Astrophysics Data System (ADS)

Wasson, M.

2011-09-01

Flight safety of orbiting resident space objects is critical to our national interest and defense. United States Strategic Command has assigned the responsibility for Space Situational Awareness (SSA) to its Joint Functional Component Command - Space (JFCC SPACE) at Vandenberg Air Force Base. This paper will describe current SSA imperatives, new developments in SSA tools and developments in Defensive Operations. Current SSA processes are being examined to capture, and possibly improve, tasking of SSN sensors and "new" space-based sensors, "common" conjunction assessment methodology, and SSA sharing due to the growth seen over the last two years. The stand-up of a Defensive Ops Branch will highlight the need for advanced analysis and collaboration across space, weather, intelligence, and cyber specialties. New developments in SSA tools will be a description of computing hardware/software upgrades planned as well as the use of User-Defined Operating Pictures and visualization applications.

Development of a Mobile Clinical Prediction Tool to Estimate Future Depression Severity and Guide Treatment in Primary Care: User-Centered Design

PubMed Central

2018-01-01

Background Around the world, depression is both under- and overtreated. The diamond clinical prediction tool was developed to assist with appropriate treatment allocation by estimating the 3-month prognosis among people with current depressive symptoms. Delivering clinical prediction tools in a way that will enhance their uptake in routine clinical practice remains challenging; however, mobile apps show promise in this respect. To increase the likelihood that an app-delivered clinical prediction tool can be successfully incorporated into clinical practice, it is important to involve end users in the app design process. Objective The aim of the study was to maximize patient engagement in an app designed to improve treatment allocation for depression. Methods An iterative, user-centered design process was employed. Qualitative data were collected via 2 focus groups with a community sample (n=17) and 7 semistructured interviews with people with depressive symptoms. The results of the focus groups and interviews were used by the computer engineering team to modify subsequent protoypes of the app. Results Iterative development resulted in 3 prototypes and a final app. The areas requiring the most substantial changes following end-user input were related to the iconography used and the way that feedback was provided. In particular, communicating risk of future depressive symptoms proved difficult; these messages were consistently misinterpreted and negatively viewed and were ultimately removed. All participants felt positively about seeing their results summarized after completion of the clinical prediction tool, but there was a need for a personalized treatment recommendation made in conjunction with a consultation with a health professional. Conclusions User-centered design led to valuable improvements in the content and design of an app designed to improve allocation of and engagement in depression treatment. Iterative design allowed us to develop a tool that allows users to feel hope, engage in self-reflection, and motivate them to treatment. The tool is currently being evaluated in a randomized controlled trial. PMID:29685864

Total Probability of Collision as a Metric for Finite Conjunction Assessment and Collision Risk Management

NASA Technical Reports Server (NTRS)

Frigm, Ryan C.; Hejduk, Matthew D.; Johnson, Lauren C.; Plakalovic, Dragan

2015-01-01

On-orbit collision risk is becoming an increasing mission risk to all operational satellites in Earth orbit. Managing this risk can be disruptive to mission and operations, present challenges for decision-makers, and is time-consuming for all parties involved. With the planned capability improvements to detecting and tracking smaller orbital debris and capacity improvements to routinely predict on-orbit conjunctions, this mission risk will continue to grow in terms of likelihood and effort. It is very real possibility that the future space environment will not allow collision risk management and mission operations to be conducted in the same manner as it is today. This paper presents the concept of a finite conjunction assessment-one where each discrete conjunction is not treated separately but, rather, as a continuous event that must be managed concurrently. The paper also introduces the Total Probability of Collision as an analogous metric for finite conjunction assessment operations and provides several options for its usage in a Concept of Operations.

For the Technologically Challenged: Four Free Online Tools to Liven up a Mathematics Classroom

ERIC Educational Resources Information Center

Northcote, Maria

2015-01-01

Use of technology in the mathematics classroom has the potential to advance children's learning of mathematics and enhance their attitudes about mathematics. When used in conjunction with purposeful planning, teachers can use technological tools to reinforce their pedagogical intentions and to facilitate relevant learning activities for students.…

Art Therapy and Cognitive Processing Therapy for Combat-Related PTSD: A Randomized Controlled Trial

PubMed Central

Campbell, Melissa; Decker, Kathleen P.; Kruk, Kerry; Deaver, Sarah P.

2018-01-01

This randomized controlled trial was designed to determine if art therapy in conjunction with Cognitive Processing Therapy (CPT) was more effective for reducing symptoms of combat posttraumatic stress disorder (PTSD) than CPT alone. Veterans (N = 11) were randomized to receive either individual CPT, or individual CPT in conjunction with individual art therapy. PTSD Checklist–Military Version and Beck Depression Inventory–II scores improved with treatment in both groups with no significant difference in improvement between the experimental and control groups. Art therapy in conjunction with CPT was found to improve trauma processing and veterans considered it to be an important part of their treatment as it provided healthy distancing, enhanced trauma recall, and increased access to emotions. PMID:29332989

Thermal and Environmental Barrier Coatings for Advanced Propulsion Engine Systems

NASA Technical Reports Server (NTRS)

Zhu, Dong-Ming; Miller, Robert A.

2004-01-01

Ceramic thermal and environmental barrier coatings (TEBCs) are used in gas turbine engines to protect engine hot-section components in the harsh combustion environments, and extend component lifetimes. For future high performance engines, the development of advanced ceramic barrier coating systems will allow these coatings to be used to simultaneously increase engine operating temperature and reduce cooling requirements, thereby leading to significant improvements in engine power density and efficiency. In order to meet future engine performance and reliability requirements, the coating systems must be designed with increased high temperature stability, lower thermal conductivity, and improved thermal stress and erosion resistance. In this paper, ceramic coating design and testing considerations will be described for high temperature and high-heat-flux engine applications in hot corrosion and oxidation, erosion, and combustion water vapor environments. Further coating performance and life improvements will be expected by utilizing advanced coating architecture design, composition optimization, and improved processing techniques, in conjunction with modeling and design tools.

75 FR 68784 - Healthy Indoor Environment Protocols for Home Energy Upgrades

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-09

... Home Energy Upgrades, in conjunction with the availability of the Department of Energy (DOE) Workforce... also provide the specific responses necessary to maintain or improve indoor air quality in conjunction...

Predicting Space Weather Effects on Close Approach Events

NASA Technical Reports Server (NTRS)

Hejduk, Matthew D.; Newman, Lauri K.; Besser, Rebecca L.; Pachura, Daniel A.

2015-01-01

The NASA Robotic Conjunction Assessment Risk Analysis (CARA) team sends ephemeris data to the Joint Space Operations Center (JSpOC) for conjunction assessment screening against the JSpOC high accuracy catalog and then assesses risk posed to protected assets from predicted close approaches. Since most spacecraft supported by the CARA team are located in LEO orbits, atmospheric drag is the primary source of state estimate uncertainty. Drag magnitude and uncertainty is directly governed by atmospheric density and thus space weather. At present the actual effect of space weather on atmospheric density cannot be accurately predicted because most atmospheric density models are empirical in nature, which do not perform well in prediction. The Jacchia-Bowman-HASDM 2009 (JBH09) atmospheric density model used at the JSpOC employs a solar storm active compensation feature that predicts storm sizes and arrival times and thus the resulting neutral density alterations. With this feature, estimation errors can occur in either direction (i.e., over- or under-estimation of density and thus drag). Although the exact effect of a solar storm on atmospheric drag cannot be determined, one can explore the effects of JBH09 model error on conjuncting objects' trajectories to determine if a conjunction is likely to become riskier, less risky, or pass unaffected. The CARA team has constructed a Space Weather Trade-Space tool that systematically alters the drag situation for the conjuncting objects and recalculates the probability of collision for each case to determine the range of possible effects on the collision risk. In addition to a review of the theory and the particulars of the tool, the different types of observed output will be explained, along with statistics of their frequency.

Transcranial magnetic stimulation as an investigative tool for motor dysfunction and recovery in stroke: an overview for neurorehabilitation clinicians

PubMed Central

Cortes, Mar; Black-Schaffer, Randie M; Edwards, Dylan J

2012-01-01

Rationale An improved understanding of motor dysfunction and recovery after stroke has important clinical implications that may lead to the design of more effective rehabilitation strategies for patients with hemiparesis. Scope Transcranial magnetic stimulation (TMS) is a safe and painless tool that has been used in conjunction with other existing diagnostic tools to investigate motor pathophysiology in stroke patients. Since TMS emerged over two decades ago, its application in clinical and basic neuroscience has expanded worldwide. TMS can quantify the corticomotor excitability properties of clinically affected and unaffected muscles, and probe local cortical networks, as well as remote but functionally related areas. This provides novel insight into the physiology of neural circuits underlying motor dysfunction, and brain reorganization during the motor recovery process. This important tool needs to be used with caution by clinical investigators, its limitations need to be understood and the results should be interpreted along with clinical evaluation in this patient population. Summary In this review, we provide an overview of the rationale, implementation and limitations of TMS to study stroke motor physiology. This knowledge may be useful to guide future rehabilitation treatments by assessing and promoting functional plasticity. PMID:22624621

The Biophysics of Infection.

PubMed

Leake, Mark C

2016-01-01

Our understanding of the processes involved in infection has grown enormously in the past decade due in part to emerging methods of biophysics. This new insight has been enabled through advances in interdisciplinary experimental technologies and theoretical methods at the cutting-edge interface of the life and physical sciences. For example, this has involved several state-of-the-art biophysical tools used in conjunction with molecular and cell biology approaches, which enable investigation of infection in living cells. There are also new, emerging interfacial science tools which enable significant improvements to the resolution of quantitative measurements both in space and time. These include single-molecule biophysics methods and super-resolution microscopy approaches. These new technological tools in particular have underpinned much new understanding of dynamic processes of infection at a molecular length scale. Also, there are many valuable advances made recently in theoretical approaches of biophysics which enable advances in predictive modelling to generate new understanding of infection. Here, I discuss these advances, and take stock on our knowledge of the biophysics of infection and discuss where future advances may lead.

Toward Genome-Based Metabolic Engineering in Bacteria.

PubMed

Oesterle, Sabine; Wuethrich, Irene; Panke, Sven

2017-01-01

Prokaryotes modified stably on the genome are of great importance for production of fine and commodity chemicals. Traditional methods for genome engineering have long suffered from imprecision and low efficiencies, making construction of suitable high-producer strains laborious. Here, we review the recent advances in discovery and refinement of molecular precision engineering tools for genome-based metabolic engineering in bacteria for chemical production, with focus on the λ-Red recombineering and the clustered regularly interspaced short palindromic repeats/Cas9 nuclease systems. In conjunction, they enable the integration of in vitro-synthesized DNA segments into specified locations on the chromosome and allow for enrichment of rare mutants by elimination of unmodified wild-type cells. Combination with concurrently developing improvements in important accessory technologies such as DNA synthesis, high-throughput screening methods, regulatory element design, and metabolic pathway optimization tools has resulted in novel efficient microbial producer strains and given access to new metabolic products. These new tools have made and will likely continue to make a big impact on the bioengineering strategies that transform the chemical industry. Copyright © 2017 Elsevier Inc. All rights reserved.

Allergic conjunctivitis: a comprehensive review of the literature

PubMed Central

2013-01-01

Ocular allergy represents one of the most common conditions encountered by allergists and ophthalmologists. Allergic conjunctivitis is often underdiagnosed and consequently undertreated. Basic and clinical research has provided a better understanding of the cells, mediators, and immunologic events, which occur in ocular allergy. New pharmacological agents have improved the efficacy and safety of ocular allergy treatment. An understanding of the immunologic mechanisms, clinical features, differential diagnosis, and treatment of ocular allergy may be useful to all specialists who deal with these patients. The purpose of this review is to systematically review literature underlining all the forms classified as ocular allergy: seasonal allergic conjunctivitis, perennial allergic conjunctivitis, vernal keratoconjunctivitis, atopic keratocongiuntivitis, contact allergy, and giant papillary conjunctivitis. PMID:23497516

Learning efficient visual search for stimuli containing diagnostic spatial configurations and color-shape conjunctions.

PubMed

Reavis, Eric A; Frank, Sebastian M; Tse, Peter U

2018-04-12

Visual search is often slow and difficult for complex stimuli such as feature conjunctions. Search efficiency, however, can improve with training. Search for stimuli that can be identified by the spatial configuration of two elements (e.g., the relative position of two colored shapes) improves dramatically within a few hundred trials of practice. Several recent imaging studies have identified neural correlates of this learning, but it remains unclear what stimulus properties participants learn to use to search efficiently. Influential models, such as reverse hierarchy theory, propose two major possibilities: learning to use information contained in low-level image statistics (e.g., single features at particular retinotopic locations) or in high-level characteristics (e.g., feature conjunctions) of the task-relevant stimuli. In a series of experiments, we tested these two hypotheses, which make different predictions about the effect of various stimulus manipulations after training. We find relatively small effects of manipulating low-level properties of the stimuli (e.g., changing their retinotopic location) and some conjunctive properties (e.g., color-position), whereas the effects of manipulating other conjunctive properties (e.g., color-shape) are larger. Overall, the findings suggest conjunction learning involving such stimuli might be an emergent phenomenon that reflects multiple different learning processes, each of which capitalizes on different types of information contained in the stimuli. We also show that both targets and distractors are learned, and that reversing learned target and distractor identities impairs performance. This suggests that participants do not merely learn to discriminate target and distractor stimuli, they also learn stimulus identity mappings that contribute to performance improvements.

The NASA Robotic Conjunction Assessment Process: Overview and Operational Experiences

NASA Technical Reports Server (NTRS)

Newman, Lauri Kraft

2008-01-01

Orbital debris poses a significant threat to spacecraft health and safety. Recent events such as China's anti-satellite test and the Breeze-M rocket explosion have led to an even greater awareness and concern in the satellite community. Therefore, the National Aeronautics and Space Administration (NASA) has established requirements that routine conjunction assessment screening shall be performed for all maneuverable spacecraft having perigees less than 2000 km or within 200 km of geosynchronous altitude. NASA s Goddard Space Flight Center (GSFC) has developed an operational collision risk assessment process to protect NASA s high-value unmanned (robotic) assets that has been in use since January 2005. This paper provides an overview of the NASA robotic conjunction assessment process, including descriptions of the new tools developed to analyze close approach data and of the risk mitigation strategies employed. In addition, statistical data describing the number of conjunctions experienced are presented. A debris avoidance maneuver performed by Aura in June of 2008 is described in detail to illustrate the process.

Perceptions and Use of Learning Management System Tools and Other Technologies in Higher Education: A Preliminary Analysis

ERIC Educational Resources Information Center

Borboa, Danielle; Joseph, Mathew; Spake, Deborah; Yazdanparast, Atefeh

2017-01-01

This study examines student views and use of technology in conjunction with university coursework. Results reveal that there is widespread use of Microsoft PowerPoint and certain learning management system (LMS) features; however, there are significant differences in views concerning the degree to which these LMS tools enhance learning based on…

Online Analysis of Wind and Solar Part I: Ramping Tool

DOE Office of Scientific and Technical Information (OSTI.GOV)

Etingov, Pavel V.; Ma, Jian; Makarov, Yuri V.

2012-01-31

To facilitate wider penetration of renewable resources without compromising system reliability concerns arising from the lack of predictability of intermittent renewable resources, a tool for use by California Independent System Operator (CAISO) power grid operators was developed by Pacific Northwest National Laboratory (PNNL) in conjunction with CAISO with funding from California Energy Commission. This tool predicts and displays additional capacity and ramping requirements caused by uncertainties in forecasts of loads and renewable generation. The tool is currently operational in the CAISO operations center. This is one of two final reports on the project.

Diamond Smoothing Tools

NASA Technical Reports Server (NTRS)

Voronov, Oleg

2007-01-01

Diamond smoothing tools have been proposed for use in conjunction with diamond cutting tools that are used in many finish-machining operations. Diamond machining (including finishing) is often used, for example, in fabrication of precise metal mirrors. A diamond smoothing tool according to the proposal would have a smooth spherical surface. For a given finish machining operation, the smoothing tool would be mounted next to the cutting tool. The smoothing tool would slide on the machined surface left behind by the cutting tool, plastically deforming the surface material and thereby reducing the roughness of the surface, closing microcracks and otherwise generally reducing or eliminating microscopic surface and subsurface defects, and increasing the microhardness of the surface layer. It has been estimated that if smoothing tools of this type were used in conjunction with cutting tools on sufficiently precise lathes, it would be possible to reduce the roughness of machined surfaces to as little as 3 nm. A tool according to the proposal would consist of a smoothing insert in a metal holder. The smoothing insert would be made from a diamond/metal functionally graded composite rod preform, which, in turn, would be made by sintering together a bulk single-crystal or polycrystalline diamond, a diamond powder, and a metallic alloy at high pressure. To form the spherical smoothing tip, the diamond end of the preform would be subjected to flat grinding, conical grinding, spherical grinding using diamond wheels, and finally spherical polishing and/or buffing using diamond powders. If the diamond were a single crystal, then it would be crystallographically oriented, relative to the machining motion, to minimize its wear and maximize its hardness. Spherically polished diamonds could also be useful for purposes other than smoothing in finish machining: They would likely also be suitable for use as heat-resistant, wear-resistant, unlubricated sliding-fit bearing inserts.

Can transcranial electrical stimulation improve learning difficulties in atypical brain development? A future possibility for cognitive training.

PubMed

Krause, Beatrix; Cohen Kadosh, Roi

2013-10-01

Learning difficulties in atypical brain development represent serious obstacles to an individual's future achievements and can have broad societal consequences. Cognitive training can improve learning impairments only to a certain degree. Recent evidence from normal and clinical adult populations suggests that transcranial electrical stimulation (TES), a portable, painless, inexpensive, and relatively safe neuroenhancement tool, applied in conjunction with cognitive training can enhance cognitive intervention outcomes. This includes, for instance, numerical processing, language skills and response inhibition deficits commonly associated with profound learning difficulties and attention-deficit hyperactivity disorder (ADHD). The current review introduces the functional principles, current applications and promising results, and potential pitfalls of TES. Unfortunately, research in child populations is limited at present. We suggest that TES has considerable promise as a tool for increasing neuroplasticity in atypically developing children and may be an effective adjunct to cognitive training in clinical settings if it proves safe. The efficacy and both short- and long-term effects of TES on the developing brain need to be critically assessed before it can be recommended for clinical settings. Copyright © 2013 The Authors. Published by Elsevier Ltd.. All rights reserved.

Using Patient Case Video Vignettes to Improve Students' Understanding of Cross-cultural Communication.

PubMed

Arif, Sally; Cryder, Brian; Mazan, Jennifer; Quiñones-Boex, Ana; Cyganska, Angelika

2017-04-01

Objective. To develop, implement, and assess whether simulated patient case videos improve students' understanding of and attitudes toward cross-cultural communication in health care. Design. Third-year pharmacy students (N=159) in a health care communications course participated in a one-hour lecture and two-hour workshop on the topic of cross-cultural communication. Three simulated pharmacist-patient case vignettes highlighting cross-cultural communication barriers, the role of active listening, appropriate use of medical interpreters, and useful models to overcome communication barriers were viewed and discussed in groups of 20 students during the workshop. Assessment. A pre-lecture and post-workshop assessed the effect on students' understanding of and attitudes toward cross-cultural communication. Understanding of cross-cultural communication concepts increased significantly, as did comfort level with providing cross-cultural care. Conclusion. Use of simulated patient case videos in conjunction with an interactive workshop improved pharmacy students' understanding of and comfort level with cross-cultural communication skills and can be useful tools for cultural competency training in the curriculum.

Multiple beam interference confocal microscopy: a tool for morphological investigation of living cells and tissues

NASA Astrophysics Data System (ADS)

Joshi, Narahari V.; Medina, Honorio

2000-05-01

Multiple beam interference system is used in conjunction with a conventional scanning confocal microscope to examine the morphology and construction of 3D images of Histolytic Ameba and parasite Candida Albicans. The present combination permits to adjoin advantages of both systems, namely the vertical high contrast and optical sectioning. The interference pattern obtained from a multiple internal reflection of a simple, sandwiched between the glass plate and the cover plate, was focussed on an objective of a scanning confocal microscope. According to optical path differences, morphological details were revealed. The combined features, namely improved resolution in z axis, originated from the interference pattern and the optical sectioning of the confocal scanning system, enhance the resolution and contrast dramatically. These features permitted to obtain unprecedented images of Histolytic Ameba and parasite Candida Albicans. Because of the improved contrast, several details like double wall structure of candida, internal structure of ameba are clearly visible.

Improving Situational Awareness for First Responders via Mobile Computing

NASA Technical Reports Server (NTRS)

Betts, Bradley J.; Mah, Robert W.; Papasin, Richard; Del Mundo, Rommel; McIntosh, Dawn M.; Jorgensen, Charles

2005-01-01

This project looks to improve first responder situational awareness using tools and techniques of mobile computing. The prototype system combines wireless communication, real-time location determination, digital imaging, and three-dimensional graphics. Responder locations are tracked in an outdoor environment via GPS and uploaded to a central server via GPRS or an 802.11 network. Responders can also wirelessly share digital images and text reports, both with other responders and with the incident commander. A pre-built three dimensional graphics model of a particular emergency scene is used to visualize responder and report locations. Responders have a choice of information end points, ranging from programmable cellular phones to tablet computers. The system also employs location-aware computing to make responders aware of particular hazards as they approach them. The prototype was developed in conjunction with the NASA Ames Disaster Assistance and Rescue Team and has undergone field testing during responder exercise at NASA Ames.

Evaluation of bias associated with capture maps derived from nonlinear groundwater flow models

USGS Publications Warehouse

Nadler, Cara; Allander, Kip K.; Pohll, Greg; Morway, Eric D.; Naranjo, Ramon C.; Huntington, Justin

2018-01-01

The impact of groundwater withdrawal on surface water is a concern of water users and water managers, particularly in the arid western United States. Capture maps are useful tools to spatially assess the impact of groundwater pumping on water sources (e.g., streamflow depletion) and are being used more frequently for conjunctive management of surface water and groundwater. Capture maps have been derived using linear groundwater flow models and rely on the principle of superposition to demonstrate the effects of pumping in various locations on resources of interest. However, nonlinear models are often necessary to simulate head-dependent boundary conditions and unconfined aquifers. Capture maps developed using nonlinear models with the principle of superposition may over- or underestimate capture magnitude and spatial extent. This paper presents new methods for generating capture difference maps, which assess spatial effects of model nonlinearity on capture fraction sensitivity to pumping rate, and for calculating the bias associated with capture maps. The sensitivity of capture map bias to selected parameters related to model design and conceptualization for the arid western United States is explored. This study finds that the simulation of stream continuity, pumping rates, stream incision, well proximity to capture sources, aquifer hydraulic conductivity, and groundwater evapotranspiration extinction depth substantially affect capture map bias. Capture difference maps demonstrate that regions with large capture fraction differences are indicative of greater potential capture map bias. Understanding both spatial and temporal bias in capture maps derived from nonlinear groundwater flow models improves their utility and defensibility as conjunctive-use management tools.

Dimensions of Small Unit Resilience in Organizations Facing Threats, Disruption, and Stress

DTIC Science & Technology

2011-06-15

upbeat. ‘He was looking forward to getting back to Iraq,’ Scott recalls. ‘He missed his buddies. He wanted to learn to play the guitar when he got...the face of adversity,), as well as, a tool to mathematically measure and score the results. One possible solution is that survey questions on...resilience could be added to existing tools and scored separately, or a separate survey could be conducted in conjunction with the other tools

Investigation of wear phenomena by microscopy

NASA Technical Reports Server (NTRS)

Buckley, D. H.

1982-01-01

The various wear mechanisms involved in the loss of material from metallic and nonmetallic surfaces are discussed. The results presented indicate how various microscopy techniques used in conjunction with other analytical tools can assist in the elucidation of a wear mechanism. Without question, microscopy is the single most important tool for the study of the wear of surfaces, to assess and address inherent mechanisms of the material removal process.

Development of a Mobile Clinical Prediction Tool to Estimate Future Depression Severity and Guide Treatment in Primary Care: User-Centered Design.

PubMed

Wachtler, Caroline; Coe, Amy; Davidson, Sandra; Fletcher, Susan; Mendoza, Antonette; Sterling, Leon; Gunn, Jane

2018-04-23

Around the world, depression is both under- and overtreated. The diamond clinical prediction tool was developed to assist with appropriate treatment allocation by estimating the 3-month prognosis among people with current depressive symptoms. Delivering clinical prediction tools in a way that will enhance their uptake in routine clinical practice remains challenging; however, mobile apps show promise in this respect. To increase the likelihood that an app-delivered clinical prediction tool can be successfully incorporated into clinical practice, it is important to involve end users in the app design process. The aim of the study was to maximize patient engagement in an app designed to improve treatment allocation for depression. An iterative, user-centered design process was employed. Qualitative data were collected via 2 focus groups with a community sample (n=17) and 7 semistructured interviews with people with depressive symptoms. The results of the focus groups and interviews were used by the computer engineering team to modify subsequent protoypes of the app. Iterative development resulted in 3 prototypes and a final app. The areas requiring the most substantial changes following end-user input were related to the iconography used and the way that feedback was provided. In particular, communicating risk of future depressive symptoms proved difficult; these messages were consistently misinterpreted and negatively viewed and were ultimately removed. All participants felt positively about seeing their results summarized after completion of the clinical prediction tool, but there was a need for a personalized treatment recommendation made in conjunction with a consultation with a health professional. User-centered design led to valuable improvements in the content and design of an app designed to improve allocation of and engagement in depression treatment. Iterative design allowed us to develop a tool that allows users to feel hope, engage in self-reflection, and motivate them to treatment. The tool is currently being evaluated in a randomized controlled trial. ©Caroline Wachtler, Amy Coe, Sandra Davidson, Susan Fletcher, Antonette Mendoza, Leon Sterling, Jane Gunn. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 23.04.2018.

Analysis of traditional versus three-dimensional augmented curriculum on anatomical learning outcome measures.

PubMed

Peterson, Diana Coomes; Mlynarczyk, Gregory S A

2016-11-01

This study examined whether student learning outcome measures are influenced by the addition of three-dimensional and digital teaching tools to a traditional dissection and lecture learning format curricula. The study was performed in a semester long graduate level course that incorporated both gross anatomy and neuroanatomy curricula. Methods compared student examination performance on material taught using lecture and cadaveric dissection teaching tools alone or lecture and cadaveric dissection augmented with computerized three-dimensional teaching tools. Additional analyses were performed to examine potential correlations between question difficulty and format, previous student performance (i.e., undergraduate grade point average), and a student perception survey. The results indicated that students performed better on material in which three-dimensional (3D) technologies are utilized in conjunction with lecture and dissection methodologies. The improvement in performance was observed across the student population primarily on laboratory examinations. Although, student performance was increased, students did not perceive that the use of the additional 3D technology significantly influenced their learning. The results indicate that the addition of 3D learning tools can influence long-term retention of gross anatomy material and should be considered as a beneficial supplement for anatomy courses. Anat Sci Educ 9: 529-536. © 2016 American Association of Anatomists. © 2016 American Association of Anatomists.

Magnetic resonance-compatible robotic and mechatronics systems for image-guided interventions and rehabilitation: a review study.

PubMed

Tsekos, Nikolaos V; Khanicheh, Azadeh; Christoforou, Eftychios; Mavroidis, Constantinos

2007-01-01

The continuous technological progress of magnetic resonance imaging (MRI), as well as its widespread clinical use as a highly sensitive tool in diagnostics and advanced brain research, has brought a high demand for the development of magnetic resonance (MR)-compatible robotic/mechatronic systems. Revolutionary robots guided by real-time three-dimensional (3-D)-MRI allow reliable and precise minimally invasive interventions with relatively short recovery times. Dedicated robotic interfaces used in conjunction with fMRI allow neuroscientists to investigate the brain mechanisms of manipulation and motor learning, as well as to improve rehabilitation therapies. This paper gives an overview of the motivation, advantages, technical challenges, and existing prototypes for MR-compatible robotic/mechatronic devices.

Bacterial conjunctivitis in childhood: etiology, clinical manifestations, diagnosis, and management.

PubMed

Leung, Alexander Kc; Hon, Kam Lun; Wong, Alex H C; Wong, Andrew S

2018-01-29

Bacterial conjunctivitis is a common reason for children to be seen in pediatric practices A correct diagnosis is important so that appropriate treatment can be instituted. To provide an update on the evaluation, diagnosis, and treatment of bacterial conjunctivitis in children. A PubMed search was completed in Clinical Queries using the key term "bacterial conjunctivitis". Patents were searched using the key term "bacterial conjunctivitis" from www.freepatentsonline.com and www.google.com/patents. In the neonatal period, bacterial conjunctivitis is rare and the most common cause of organism is Staphylococcus aureus, followed by Chlamydia trachomatis. In infants and older children, bacterial conjunctivitis is most often caused by Haemophilus influenzae, Streptococcus pneumoniae, and Moraxella catarrhalis. Clinically, bacterial conjunctivitis is characterized by a purulent eye discharge, or sticky eyes on awakening, a foreign body sensation and conjunctival injection (pink eye). The diagnosis is made clinically. Cultures are unnecessary. Some authors suggest a watchful observation approach as most cases of bacterial conjunctivitis are self-limited. A Cochrane review suggests the use of antibiotic eye drops is associated with modestly improved rates of clinical and microbiological omission as compared to the use of placebo. Various investigators have also disclosed patents for the treatment of conjunctivitis. The present consensus supports the use of topical antibiotics for bacterial conjunctivitis. Topical antibiotics shorten the course of the disease, reduce discomfort, prevent person-to-person transmission and reduce the rate of reinfection. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Operational seasonal forecasting of crop performance.

PubMed

Stone, Roger C; Meinke, Holger

2005-11-29

Integrated, interdisciplinary crop performance forecasting systems, linked with appropriate decision and discussion support tools, could substantially improve operational decision making in agricultural management. Recent developments in connecting numerical weather prediction models and general circulation models with quantitative crop growth models offer the potential for development of integrated systems that incorporate components of long-term climate change. However, operational seasonal forecasting systems have little or no value unless they are able to change key management decisions. Changed decision making through incorporation of seasonal forecasting ultimately has to demonstrate improved long-term performance of the cropping enterprise. Simulation analyses conducted on specific production scenarios are especially useful in improving decisions, particularly if this is done in conjunction with development of decision-support systems and associated facilitated discussion groups. Improved management of the overall crop production system requires an interdisciplinary approach, where climate scientists, agricultural scientists and extension specialists are intimately linked with crop production managers in the development of targeted seasonal forecast systems. The same principle applies in developing improved operational management systems for commodity trading organizations, milling companies and agricultural marketing organizations. Application of seasonal forecast systems across the whole value chain in agricultural production offers considerable benefits in improving overall operational management of agricultural production.

Operational seasonal forecasting of crop performance

PubMed Central

Stone, Roger C; Meinke, Holger

2005-01-01

Integrated, interdisciplinary crop performance forecasting systems, linked with appropriate decision and discussion support tools, could substantially improve operational decision making in agricultural management. Recent developments in connecting numerical weather prediction models and general circulation models with quantitative crop growth models offer the potential for development of integrated systems that incorporate components of long-term climate change. However, operational seasonal forecasting systems have little or no value unless they are able to change key management decisions. Changed decision making through incorporation of seasonal forecasting ultimately has to demonstrate improved long-term performance of the cropping enterprise. Simulation analyses conducted on specific production scenarios are especially useful in improving decisions, particularly if this is done in conjunction with development of decision-support systems and associated facilitated discussion groups. Improved management of the overall crop production system requires an interdisciplinary approach, where climate scientists, agricultural scientists and extension specialists are intimately linked with crop production managers in the development of targeted seasonal forecast systems. The same principle applies in developing improved operational management systems for commodity trading organizations, milling companies and agricultural marketing organizations. Application of seasonal forecast systems across the whole value chain in agricultural production offers considerable benefits in improving overall operational management of agricultural production. PMID:16433097

Evaluating the Effectiveness of Two Teaching Strategies to Improve Nursing Students' Knowledge, Skills, and Attitudes About Quality Improvement and Patient Safety.

PubMed

Maxwell, Karen L; Wright, Vivian H

The purpose of this study was to evaluate two teaching strategies with regard to quality and safety education for nurses content on quality improvement and safety. Two groups (total of 64 students) participated in online learning or online learning in conjunction with a flipped classroom. A pretest/posttest control group design was used. The use of online modules in conjunction with the flipped classroom had a greater effect on increasing nursing students' knowledge of quality improvement than the use of online modules only. There was no statistically significant difference between the groups for safety.

Specific IgE in tear fluid and features of allergic conjunctivitis.

PubMed

Mimura, Tatsuya; Yamagami, Satoru; Kamei, Yuko; Goto, Mari; Matsubara, Masao

2013-09-01

The level of specific class E immunoglobulins (IgE) in tear fluid is a useful diagnostic indicator for allergic conjunctivitis, but it is still unclear whether the measurement of tear fluid IgE is helpful for assessing the severity of allergic conjunctivitis. In this study, we evaluated the relation between tear fluid levels of specific IgE and features of allergic conjunctivitis. A prospective, nonrandomized, cross-sectional study was conducted in patients with allergic conjunctivitis (n = 55, allergic group) and age- and sex-matched healthy control subjects (n = 50, control group). Levels of specific IgE for cedar pollen, cat epithelium/dander and Dermatophagoides pteronyssinus were measured in tear fluid with the Immfast Check J1®. A severity score (0, 1, 2 or 3) was assigned for various changes of the palpebral and bulbar conjunctiva, as well as for limbal and corneal lesions. The levels of specific IgE for both cedar pollen, and D. pteronyssinus were significantly higher in the allergic group compared with the control group (p < 0.0001), while the level of specific IgE for cat epithelium/dander showed no significant difference between the two groups (p = 0.0777). When IgE levels were divided into four classes, the classes for both D. Pteronyssinus and cat epithelium/dander IgE were correlated with four features of allergic conjunctivitis. On the other hand, no correlation was found between the class of cedar pollen IgE and any of the features of allergic conjunctivitis. This study demonstrated that measurement of specific IgE in tear fluid may be useful for determining the severity of allergic conjunctivitis induced by indoor allergens. Although measurement of IgE in tear fluid is only a supplemental tool for evaluating the clinical activity of allergic conjunctivitis, the test can be useful for detecting specific IgE antibodies responsible for this condition.

Develop an asset management tool for collecting and tracking commitments on selected environmental mitigation features.

DOT National Transportation Integrated Search

2009-05-01

Wisconsin has constructed many environmental mitigation projects in conjunction with transportation projects that have been implemented according : to the National Environmental Policy Act. Other mitigation projects have been constructed pursuant to ...

Visual search for features and conjunctions in development.

PubMed

Lobaugh, N J; Cole, S; Rovet, J F

1998-12-01

Visual search performance was examined in three groups of children 7 to 12 years of age and in young adults. Colour and orientation feature searches and a conjunction search were conducted. Reaction time (RT) showed expected improvements in processing speed with age. Comparisons of RT's on target-present and target-absent trials were consistent with parallel search on the two feature conditions and with serial search in the conjunction condition. The RT results indicated searches for feature and conjunctions were treated similarly for children and adults. However, the youngest children missed more targets at the largest array sizes, most strikingly in conjunction search. Based on an analysis of speed/accuracy trade-offs, we suggest that low target-distractor discriminability leads to an undersampling of array elements, and is responsible for the high number of misses in the youngest children.

Analysis of spatial-temporal patterns of water table change as a tool for conjunctive water management in the Upper Central Plain of the Chao Phraya River Basin, Thailand

NASA Astrophysics Data System (ADS)

Vasconcelos, Vitor Vieira; Koontanakulvong, Sucharit; Suthidhummajit, Chokchai; Junior, Paulo Pereira Martins; Hadad, Renato Moreira

2017-03-01

A sustainable strategy for conjunctive water management must include information on the temporal and spatial availability of this natural resource. Because of water shortages in the dry seasons, farmers on the Upper Plain of the Chao Phraya River basin, Thailand, are increasingly using groundwater to meet their irrigation needs. To evaluate the possibilities of conjunctive water management in the area, the spatial-temporal changes in the water table of the Younger Terrace Aquifer were investigated. First, a regional geomorphological map based on field surveys, remote sensing and previous environmental studies was developed. Then, the well data were analyzed in relation to rainfall, streamflow, yield and pumpage, and the data were interpolated using geostatistical techniques. The results were analyzed via integrated zoning based on color theory as applied to multivariate visualization. The analysis results indicate areas that would be more suitable for groundwater extraction in a conjunctive management framework with regard to the natural hydrogeological processes and the effects of human interaction. The kriging results were compared with the geomorphological map, and the geomorphological areas exhibit distinct hydrogeological patterns. The western fans exhibit the best potential for the expansion of conjunctive use, whereas the borders of the northern fans exhibit the lowest potential.

Millimeter Wave Radar for Atmospheric Turbulence Characterization and Wind Profiling for Improved Naval Operations

DTIC Science & Technology

2016-12-29

airflows surrounding ships can be used to determine operational envelopes, more efficiently space incoming aircraft, and can be used in conjunction with...aircraft, and can be used in conjunction with simulations to inform and influence ship design. Another application is for high-energy laser propagation

Single-molecule fluorescence microscopy review: shedding new light on old problems

PubMed Central

Shashkova, Sviatlana

2017-01-01

Fluorescence microscopy is an invaluable tool in the biosciences, a genuine workhorse technique offering exceptional contrast in conjunction with high specificity of labelling with relatively minimal perturbation to biological samples compared with many competing biophysical techniques. Improvements in detector and dye technologies coupled to advances in image analysis methods have fuelled recent development towards single-molecule fluorescence microscopy, which can utilize light microscopy tools to enable the faithful detection and analysis of single fluorescent molecules used as reporter tags in biological samples. For example, the discovery of GFP, initiating the so-called ‘green revolution’, has pushed experimental tools in the biosciences to a completely new level of functional imaging of living samples, culminating in single fluorescent protein molecule detection. Today, fluorescence microscopy is an indispensable tool in single-molecule investigations, providing a high signal-to-noise ratio for visualization while still retaining the key features in the physiological context of native biological systems. In this review, we discuss some of the recent discoveries in the life sciences which have been enabled using single-molecule fluorescence microscopy, paying particular attention to the so-called ‘super-resolution’ fluorescence microscopy techniques in live cells, which are at the cutting-edge of these methods. In particular, how these tools can reveal new insights into long-standing puzzles in biology: old problems, which have been impossible to tackle using other more traditional tools until the emergence of new single-molecule fluorescence microscopy techniques. PMID:28694303

Surveillance Tools Emerging From Search Engines and Social Media Data for Determining Eye Disease Patterns.

PubMed

Deiner, Michael S; Lietman, Thomas M; McLeod, Stephen D; Chodosh, James; Porco, Travis C

2016-09-01

Internet-based search engine and social media data may provide a novel complementary source for better understanding the epidemiologic factors of infectious eye diseases, which could better inform eye health care and disease prevention. To assess whether data from internet-based social media and search engines are associated with objective clinic-based diagnoses of conjunctivitis. Data from encounters of 4143 patients diagnosed with conjunctivitis from June 3, 2012, to April 26, 2014, at the University of California San Francisco (UCSF) Medical Center, were analyzed using Spearman rank correlation of each weekly observation to compare demographics and seasonality of nonallergic conjunctivitis with allergic conjunctivitis. Data for patient encounters with diagnoses for glaucoma and influenza were also obtained for the same period and compared with conjunctivitis. Temporal patterns of Twitter and Google web search data, geolocated to the United States and associated with these clinical diagnoses, were compared with the clinical encounters. The a priori hypothesis was that weekly internet-based searches and social media posts about conjunctivitis may reflect the true weekly clinical occurrence of conjunctivitis. Weekly total clinical diagnoses at UCSF of nonallergic conjunctivitis, allergic conjunctivitis, glaucoma, and influenza were compared using Spearman rank correlation with equivalent weekly data on Tweets related to disease or disease-related keyword searches obtained from Google Trends. Seasonality of clinical diagnoses of nonallergic conjunctivitis among the 4143 patients (2364 females [57.1%] and 1776 males [42.9%]) with 5816 conjunctivitis encounters at UCSF correlated strongly with results of Google searches in the United States for the term pink eye (ρ, 0.68 [95% CI, 0.52 to 0.78]; P < .001) and correlated moderately with Twitter results about pink eye (ρ, 0.38 [95% CI, 0.16 to 0.56]; P < .001) and with clinical diagnosis of influenza (ρ, 0.33 [95% CI, 0.12 to 0.49]; P < .001), but did not significantly correlate with seasonality of clinical diagnoses of allergic conjunctivitis diagnosis at UCSF (ρ, 0.21 [95% CI, -0.02 to 0.42]; P = .06) or with results of Google searches in the United States for the term eye allergy (ρ, 0.13 [95% CI, -0.06 to 0.32]; P = .19). Seasonality of clinical diagnoses of allergic conjunctivitis at UCSF correlated strongly with results of Google searches in the United States for the term eye allergy (ρ, 0.44 [95% CI, 0.24 to 0.60]; P < .001) and eye drops (ρ, 0.47 [95% CI, 0.27 to 0.62]; P < .001). Internet-based search engine and social media data may reflect the occurrence of clinically diagnosed conjunctivitis, suggesting that these data sources can be leveraged to better understand the epidemiologic factors of conjunctivitis.

Effect of high intensity focused ultrasound (HIFU) in conjunction with a nanomedicines-microbubble complex for enhanced drug delivery.

PubMed

Han, Hyounkoo; Lee, Hohyeon; Kim, Kwangmeyung; Kim, Hyuncheol

2017-11-28

Although nanomedicines have been intensively investigated for cancer therapy in the past, poor accumulation of nanomedicines in tumor sites remains a serious problem. Therefore, a novel drug delivery system is required to enhance accumulation and penetration of nanomedicines at the tumor site. Recently, high-intensity focused ultrasound (HIFU) has been highlighted as a non-invasive therapeutic modality, and showed enhanced therapeutic efficacy in combination with nanomedicines. Cavitation effect induced by the combination of HIFU and microbubbles results in transiently enhanced cell membrane permeability, facilitating improved drug delivery efficiency into tumor sites. Therefore, we introduce the acoustic cavitation and thermal/mechanical effects of HIFU in conjunction with microbubble to overcome the limitation of conventional drug delivery. The cavitation effect maximized by the strong acoustic energy of HIFU induced the preferential accumulation of nanomedicine locally released from the nanomedicines-microbubble complex in the tumor. In addition, the mechanical effect of HIFU allowed the accumulated nanomedicines to penetrate into deeper tumor region. The preferential accumulation and deeper penetration of nanomedicines by HIFU showed enhanced therapeutic efficacy, compared to low frequency ultrasound (US). These overall results demonstrate that the strategy combined nanomedicines-microbubble complex with HIFU is a promising tools for cancer therapy. Copyright © 2017 Elsevier B.V. All rights reserved.

Assessing the Pathogenicity of Insertion and Deletion Variants with the Variant Effect Scoring Tool (VEST‐Indel)

PubMed Central

Douville, Christopher; Masica, David L.; Stenson, Peter D.; Cooper, David N.; Gygax, Derek M.; Kim, Rick; Ryan, Michael

2015-01-01

ABSTRACT Insertion/deletion variants (indels) alter protein sequence and length, yet are highly prevalent in healthy populations, presenting a challenge to bioinformatics classifiers. Commonly used features—DNA and protein sequence conservation, indel length, and occurrence in repeat regions—are useful for inference of protein damage. However, these features can cause false positives when predicting the impact of indels on disease. Existing methods for indel classification suffer from low specificities, severely limiting clinical utility. Here, we further develop our variant effect scoring tool (VEST) to include the classification of in‐frame and frameshift indels (VEST‐indel) as pathogenic or benign. We apply 24 features, including a new “PubMed” feature, to estimate a gene's importance in human disease. When compared with four existing indel classifiers, our method achieves a drastically reduced false‐positive rate, improving specificity by as much as 90%. This approach of estimating gene importance might be generally applicable to missense and other bioinformatics pathogenicity predictors, which often fail to achieve high specificity. Finally, we tested all possible meta‐predictors that can be obtained from combining the four different indel classifiers using Boolean conjunctions and disjunctions, and derived a meta‐predictor with improved performance over any individual method. PMID:26442818

Assessing the Pathogenicity of Insertion and Deletion Variants with the Variant Effect Scoring Tool (VEST-Indel).

PubMed

Douville, Christopher; Masica, David L; Stenson, Peter D; Cooper, David N; Gygax, Derek M; Kim, Rick; Ryan, Michael; Karchin, Rachel

2016-01-01

Insertion/deletion variants (indels) alter protein sequence and length, yet are highly prevalent in healthy populations, presenting a challenge to bioinformatics classifiers. Commonly used features--DNA and protein sequence conservation, indel length, and occurrence in repeat regions--are useful for inference of protein damage. However, these features can cause false positives when predicting the impact of indels on disease. Existing methods for indel classification suffer from low specificities, severely limiting clinical utility. Here, we further develop our variant effect scoring tool (VEST) to include the classification of in-frame and frameshift indels (VEST-indel) as pathogenic or benign. We apply 24 features, including a new "PubMed" feature, to estimate a gene's importance in human disease. When compared with four existing indel classifiers, our method achieves a drastically reduced false-positive rate, improving specificity by as much as 90%. This approach of estimating gene importance might be generally applicable to missense and other bioinformatics pathogenicity predictors, which often fail to achieve high specificity. Finally, we tested all possible meta-predictors that can be obtained from combining the four different indel classifiers using Boolean conjunctions and disjunctions, and derived a meta-predictor with improved performance over any individual method. © 2015 The Authors. **Human Mutation published by Wiley Periodicals, Inc.

Operational support to collision avoidance activities by ESA's space debris office

NASA Astrophysics Data System (ADS)

Braun, V.; Flohrer, T.; Krag, H.; Merz, K.; Lemmens, S.; Bastida Virgili, B.; Funke, Q.

2016-09-01

The European Space Agency's (ESA) Space Debris Office provides a service to support operational collision avoidance activities. This support currently covers ESA's missions Cryosat-2, Sentinel-1A and -2A, the constellation of Swarm-A/B/C in low-Earth orbit (LEO), as well as missions of third-party customers. In this work, we describe the current collision avoidance process for ESA and third-party missions in LEO. We give an overview on the upgrades developed and implemented since the advent of conjunction summary messages (CSM)/conjunction data messages (CDM), addressing conjunction event detection, collision risk assessment, orbit determination, orbit and covariance propagation, process control, and data handling. We pay special attention to the effect of warning thresholds on the risk reduction and manoeuvre rates, as they are established through risk mitigation and analysis tools, such as ESA's Debris Risk Assessment and Mitigation Analysis (DRAMA) software suite. To handle the large number of CDMs and the associated risk analyses, a database-centric approach has been developed. All CDMs and risk analysis results are stored in a database. In this way, a temporary local "mini-catalogue" of objects close to our target spacecraft is obtained, which can be used, e.g., for manoeuvre screening and to update the risk analysis whenever a new ephemeris becomes available from the flight dynamics team. The database is also used as the backbone for a Web-based tool, which consists of the visualization component and a collaboration tool that facilitates the status monitoring and task allocation within the support team as well as communication with the control team. The visualization component further supports the information sharing by displaying target and chaser motion over time along with the involved uncertainties. The Web-based solution optimally meets the needs for a concise and easy-to-use way to obtain a situation picture in a very short time, and the support for third-party missions not operated from the European Space Operations Centre (ESOC). Finally, we provide statistics on the identified conjunction events, taking into account the known significant changes in the LEO orbital environment and share ESA's experience along with recent examples.

MANUAL: GROUND-WATER AND LEACHATE TREATMENT SYSTEMS

EPA Science Inventory

This manual was developed for remedial design engineers and regulatory personnel who oversee the ex situ ground water or leachate treatment efforts of the regulated community. The manual can be used as a treatment technology screening tool in conjunction with other references. Mo...

Measuring the quality of Hospital Food Services: Development and reliability of a Meal Quality Audit Tool.

PubMed

Banks, Merrilyn; Hannan-Jones, Mary; Ross, Lynda; Buckley, Ann; Ellick, Jennifer; Young, Adrienne

2017-04-01

To develop and test the reliability of a Meal Quality Audit Tool (MQAT) to audit the quality of hospital meals to assist food service managers and dietitians in identifying areas for improvement. The MQAT was developed using expert opinion and was modified over time with extensive use and feedback. A phased approach was used to assess content validity and test reliability: (i) trial with 60 dietetic students, (ii) trial with 12 food service dietitians in practice and (iii) interrater reliability study. Phases 1 and 2 confirmed content validity and informed minor revision of scoring, language and formatting of the MQAT. To assess reliability of the final MQAT, eight separate meal quality audits of five identical meals were conducted over several weeks in the hospital setting. Each audit comprised an 'expert' team and four 'test' teams (dietitians, food services and ward staff). Interrater reliability was determined using intra-class correlation analysis. There was statistically significant interrater reliability for dimensions of Temperature and Accuracy (P < 0.001) but not for Appearance or Sensory. Composition of the 'test' team appeared to influence results for Appearance and Sensory, with food service-led teams scoring higher on these dimensions. 'Test' teams reported that MQAT was clear and easy to use. MQAT was found to be reliable for Temperature and Accuracy domains, with further work required to improve the reliability of the Appearance and Sensory dimensions. The systematic use of the tool, used in conjunction with patient satisfaction, could provide pertinent and useful information regarding the quality of food services and areas for improvement. © 2017 Dietitians Association of Australia.

Clinical evaluation of total IgE in tears of patients with allergic conjunctivitis disease using a novel application of the immunochromatography method.

PubMed

Inada, Noriko; Shoji, Jun; Kato, Hiroshi; Kiely, Surayah; Mulyanto; Sawa, Mitsuru

2009-12-01

The determination of total IgE in tears is useful as a diagnostic tool in allergic conjunctivitis disease (ACD). We evaluated the efficacy of this diagnostic tool for ACD, which is a clinically applicable novel immunochromagraphic method to determine total IgE in tears. The subjects comprised 4 groups: 15 patients with vernal keratoconjunctivitis (VKC group), 8 patients with atopic keratoconjunctivitis (AKC group), 18 patients with allergic conjunctivitis (AC group), and 7 normal healthy volunteers as a control (control group). Tears were sampled using filter paper, and the total IgE in tears was determined by immunochromatography assay. Semiquantitative determination was carried out by examining the intensity of the colored line using an immunochromatoreader (IgE index). The relationship between IgE indices in tears and total IgE levels in serum or between IgE indices and the clinical scores of ACD was examined. The positive ratio obtained by this novel application of the immunochromatography assay was 38 of the 41 in the patients with ACD and none in the 7 controls. IgE indices for the VKC group, AKC group and AC group were 27.5 +/- 15.6, 19.8 +/- 15.8, and 4.0 +/- 3.1 (mean +/- SD), respectively. IgE indices in tears showed significant correlation with both total IgE levels in serum (P < 0.001, r = 0.76) and clinical scores of ACD (P < 0.001, r = 0.57). The novel application of the immunochromatography assay to assess the total IgE in tears is a useful clinical tool to investigate ACD.

Concurrent multiscale imaging with magnetic resonance imaging and optical coherence tomography

NASA Astrophysics Data System (ADS)

Liang, Chia-Pin; Yang, Bo; Kim, Il Kyoon; Makris, George; Desai, Jaydev P.; Gullapalli, Rao P.; Chen, Yu

2013-04-01

We develop a novel platform based on a tele-operated robot to perform high-resolution optical coherence tomography (OCT) imaging under continuous large field-of-view magnetic resonance imaging (MRI) guidance. Intra-operative MRI (iMRI) is a promising guidance tool for high-precision surgery, but it may not have sufficient resolution or contrast to visualize certain small targets. To address these limitations, we develop an MRI-compatible OCT needle probe, which is capable of providing microscale tissue architecture in conjunction with macroscale MRI tissue morphology in real time. Coregistered MRI/OCT images on ex vivo chicken breast and human brain tissues demonstrate that the complementary imaging scales and contrast mechanisms have great potential to improve the efficiency and the accuracy of iMRI procedure.

Using Patient Case Video Vignettes to Improve Students’ Understanding of Cross-cultural Communication

PubMed Central

Cryder, Brian; Mazan, Jennifer; Quiñones-Boex, Ana; Cyganska, Angelika

2017-01-01

Objective. To develop, implement, and assess whether simulated patient case videos improve students’ understanding of and attitudes toward cross-cultural communication in health care. Design. Third-year pharmacy students (N=159) in a health care communications course participated in a one-hour lecture and two-hour workshop on the topic of cross-cultural communication. Three simulated pharmacist-patient case vignettes highlighting cross-cultural communication barriers, the role of active listening, appropriate use of medical interpreters, and useful models to overcome communication barriers were viewed and discussed in groups of 20 students during the workshop. Assessment. A pre-lecture and post-workshop assessed the effect on students’ understanding of and attitudes toward cross-cultural communication. Understanding of cross-cultural communication concepts increased significantly, as did comfort level with providing cross-cultural care. Conclusion. Use of simulated patient case videos in conjunction with an interactive workshop improved pharmacy students' understanding of and comfort level with cross-cultural communication skills and can be useful tools for cultural competency training in the curriculum. PMID:28496276

Remote Patient Monitoring in IBD: Current State and Future Directions.

PubMed

Atreja, Ashish; Otobo, Emamuzo; Ramireddy, Karthik; Deorocki, Allyssa

2018-03-07

Mobile apps are now increasingly used in conjunction with telemedicine and wearable devices to support remote patient monitoring (RPM). The goal of this paper is to review the available evidence and assess the scope of RPM integration into standard practices for care and management of chronic disease in general and, more specifically, inflammatory bowel disease (IBD). RPM has been associated with improvements in health outcomes and indicators across a broad range of chronic diseases. However, there is limited data on the effectiveness of RPM in IBD care. From the emerging literature and body of research, we found promising results about the feasibility of integrating RPM in IBD care and RPM's capacity to support IBD improvement in key process and outcome metrics. Concerns regarding privacy and provider acceptability have limited the mass integration of RPM to date. However, with the healthcare industry's move toward value-based population care and the advent of novel payment models for RPM reimbursement, the adoption of RPM into standard IBD care practices will likely increase as the technology continues to improve and become a mainstream tool for healthcare delivery in the near future.

Primary ciliary dyskinesia.

PubMed

Lobo, L J; Zariwala, M A; Noone, P G

2014-09-01

Primary ciliary dyskinesia (PCD) is an autosomal recessive disorder of cilia structure and function, leading to chronic infections of the respiratory tract, fertility problems and disorders of organ laterality. Making a definitive diagnosis is challenging, utilizing characteristic phenotypes, ciliary functional and ultra-structural defects in addition to newer screening tools such as nasal nitric oxide and genetic testing. There are 21 known PCD causing genes and in the future, comprehensive genetic testing may help diagnosis young infants prior to developing symptoms thus improving survival. Therapy includes surveillance of pulmonary function and microbiology in addition to, airway clearance, antibiotics and early referral to bronchiectasis centers. Standardized care at specialized centers using a multidisciplinary approach is likely to improve outcomes. In conjunction with the PCD foundation and lead investigators and clinicians are developing a network of PCD clinical centers to coordinate the effort in North America and Europe. As the network grows, care and knowledge will undoubtedly improve. © The Author 2014. Published by Oxford University Press on behalf of the Association of Physicians. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Developing a multidisciplinary robotic surgery quality assessment program.

PubMed

Gonsenhauser, Iahn; Abaza, Ronney; Mekhjian, Hagop; Moffatt-Bruce, Susan D

2012-01-01

The objective of this study was to test the feasibility of a novel quality-improvement (QI) program designed to incorporate multiple robotic surgical sub-specialties in one health care system. A robotic surgery quality assessment program was developed by The Ohio State University College of Medicine (OSUMC) in conjunction with The Ohio State University Medical Center Quality Improvement and Operations Department. A retrospective review of cases was performed using data interrogated from the OSUMC Information Warehouse from January 2007 through August 2009. Robotic surgery cases (n=2200) were assessed for operative times, length of stay (LOS), conversions, returns to surgery, readmissions and cancellations as potential quality indicators. An actionable and reproducible framework for the quality measurement and assessment of a multidisciplinary and interdepartmental robotic surgery program was successfully completed demonstrating areas for improvement opportunities. This report supports that standard quality indicators can be applied to multiple specialties within a health care system to develop a useful quality tracking and assessment tool in the highly specialized area of robotic surgery. © 2012 National Association for Healthcare Quality.

Finding collaborators: toward interactive discovery tools for research network systems.

PubMed

Borromeo, Charles D; Schleyer, Titus K; Becich, Michael J; Hochheiser, Harry

2014-11-04

Research networking systems hold great promise for helping biomedical scientists identify collaborators with the expertise needed to build interdisciplinary teams. Although efforts to date have focused primarily on collecting and aggregating information, less attention has been paid to the design of end-user tools for using these collections to identify collaborators. To be effective, collaborator search tools must provide researchers with easy access to information relevant to their collaboration needs. The aim was to study user requirements and preferences for research networking system collaborator search tools and to design and evaluate a functional prototype. Paper prototypes exploring possible interface designs were presented to 18 participants in semistructured interviews aimed at eliciting collaborator search needs. Interview data were coded and analyzed to identify recurrent themes and related software requirements. Analysis results and elements from paper prototypes were used to design a Web-based prototype using the D3 JavaScript library and VIVO data. Preliminary usability studies asked 20 participants to use the tool and to provide feedback through semistructured interviews and completion of the System Usability Scale (SUS). Initial interviews identified consensus regarding several novel requirements for collaborator search tools, including chronological display of publication and research funding information, the need for conjunctive keyword searches, and tools for tracking candidate collaborators. Participant responses were positive (SUS score: mean 76.4%, SD 13.9). Opportunities for improving the interface design were identified. Interactive, timeline-based displays that support comparison of researcher productivity in funding and publication have the potential to effectively support searching for collaborators. Further refinement and longitudinal studies may be needed to better understand the implications of collaborator search tools for researcher workflows.

Finding Collaborators: Toward Interactive Discovery Tools for Research Network Systems

PubMed Central

Schleyer, Titus K; Becich, Michael J; Hochheiser, Harry

2014-01-01

Background Research networking systems hold great promise for helping biomedical scientists identify collaborators with the expertise needed to build interdisciplinary teams. Although efforts to date have focused primarily on collecting and aggregating information, less attention has been paid to the design of end-user tools for using these collections to identify collaborators. To be effective, collaborator search tools must provide researchers with easy access to information relevant to their collaboration needs. Objective The aim was to study user requirements and preferences for research networking system collaborator search tools and to design and evaluate a functional prototype. Methods Paper prototypes exploring possible interface designs were presented to 18 participants in semistructured interviews aimed at eliciting collaborator search needs. Interview data were coded and analyzed to identify recurrent themes and related software requirements. Analysis results and elements from paper prototypes were used to design a Web-based prototype using the D3 JavaScript library and VIVO data. Preliminary usability studies asked 20 participants to use the tool and to provide feedback through semistructured interviews and completion of the System Usability Scale (SUS). Results Initial interviews identified consensus regarding several novel requirements for collaborator search tools, including chronological display of publication and research funding information, the need for conjunctive keyword searches, and tools for tracking candidate collaborators. Participant responses were positive (SUS score: mean 76.4%, SD 13.9). Opportunities for improving the interface design were identified. Conclusions Interactive, timeline-based displays that support comparison of researcher productivity in funding and publication have the potential to effectively support searching for collaborators. Further refinement and longitudinal studies may be needed to better understand the implications of collaborator search tools for researcher workflows. PMID:25370463

The Use of Conjunctions in Cognitively Simple versus Complex Oral L2 Tasks

ERIC Educational Resources Information Center

Michel, Marije C.

2013-01-01

The present study explores the use of conjunctions in simple versus complex argumentative tasks performed by second language (L2) learners as a specific measure for the amount of reasoning involved in task performance. The Cognition Hypothesis (Robinson, 2005) states that an increase in cognitive task complexity promotes improvements in L2…

An Integrative Review of Pediatric Fall Risk Assessment Tools.

PubMed

DiGerolamo, Kimberly; Davis, Katherine Finn

Patient fall prevention begins with accurate risk assessment. However, sustained improvements in prevention and quality of care include use of validated fall risk assessment tools (FRATs). The goal of FRATs is to identify patients at highest risk. Adult FRATs are often borrowed from to create tools for pediatric patients. Though factors associated with pediatric falls in the hospital setting are similar to those in adults, such as mobility, medication use, and cognitive impairment, adult FRATs and the factors associated with them do not adequately assess risk in children. Articles were limited to English language, ages 0-21years, and publish date 2006-2015. The search yielded 22 articles. Ten were excluded as the population was primarily adult or lacked discussion of a FRAT. Critical appraisal and findings were synthesized using the Johns Hopkins Nursing evidence appraisal system. Twelve articles relevant to fall prevention in the pediatric hospital setting that discussed fall risk assessment and use of a FRAT were reviewed. Comparison between and accuracy of FRATs is challenged when different classifications, definitions, risk stratification, and inclusion criteria are used. Though there are several pediatric FRATs published in the literature, none have been found to be reliable and valid across institutions and diverse populations. This integrative review highlights the importance of choosing a FRAT based on an institution's identified risk factors and validating the tool for one's own patient population as well as using the tool in conjunction with nursing clinical judgment to guide interventions. Copyright © 2017 Elsevier Inc. All rights reserved.

Dfam: a database of repetitive DNA based on profile hidden Markov models.

PubMed

Wheeler, Travis J; Clements, Jody; Eddy, Sean R; Hubley, Robert; Jones, Thomas A; Jurka, Jerzy; Smit, Arian F A; Finn, Robert D

2013-01-01

We present a database of repetitive DNA elements, called Dfam (http://dfam.janelia.org). Many genomes contain a large fraction of repetitive DNA, much of which is made up of remnants of transposable elements (TEs). Accurate annotation of TEs enables research into their biology and can shed light on the evolutionary processes that shape genomes. Identification and masking of TEs can also greatly simplify many downstream genome annotation and sequence analysis tasks. The commonly used TE annotation tools RepeatMasker and Censor depend on sequence homology search tools such as cross_match and BLAST variants, as well as Repbase, a collection of known TE families each represented by a single consensus sequence. Dfam contains entries corresponding to all Repbase TE entries for which instances have been found in the human genome. Each Dfam entry is represented by a profile hidden Markov model, built from alignments generated using RepeatMasker and Repbase. When used in conjunction with the hidden Markov model search tool nhmmer, Dfam produces a 2.9% increase in coverage over consensus sequence search methods on a large human benchmark, while maintaining low false discovery rates, and coverage of the full human genome is 54.5%. The website provides a collection of tools and data views to support improved TE curation and annotation efforts. Dfam is also available for download in flat file format or in the form of MySQL table dumps.

Surveillance Tools Emerging From Search Engines and Social Media Data for Determining Eye Disease Patterns

PubMed Central

Deiner, Michael S.; Lietman, Thomas M.; McLeod, Stephen D.; Chodosh, James; Porco, Travis C.

2016-01-01

IMPORTANCE Internet-based search engine and social media data may provide a novel complementary source for better understanding the epidemiologic factors of infectious eye diseases, which could better inform eye health care and disease prevention. OBJECTIVE To assess whether data from internet-based social media and search engines are associated with objective clinic-based diagnoses of conjunctivitis. DESIGN, SETTING, AND PARTICIPANTS Data from encounters of 4143 patients diagnosed with conjunctivitis from June 3, 2012, to April 26, 2014, at the University of California San Francisco (UCSF) Medical Center, were analyzed using Spearman rank correlation of each weekly observation to compare demographics and seasonality of nonallergic conjunctivitis with allergic conjunctivitis. Data for patient encounters with diagnoses for glaucoma and influenza were also obtained for the same period and compared with conjunctivitis. Temporal patterns of Twitter and Google web search data, geolocated to the United States and associated with these clinical diagnoses, were compared with the clinical encounters. The a priori hypothesis was that weekly internet-based searches and social media posts about conjunctivitis may reflect the true weekly clinical occurrence of conjunctivitis. MAIN OUTCOMES AND MEASURES Weekly total clinical diagnoses at UCSF of nonallergic conjunctivitis, allergic conjunctivitis, glaucoma, and influenza were compared using Spearman rank correlation with equivalent weekly data on Tweets related to disease or disease-related keyword searches obtained from Google Trends. RESULTS Seasonality of clinical diagnoses of nonallergic conjunctivitis among the 4143 patients (2364 females [57.1%] and 1776 males [42.9%]) with 5816 conjunctivitis encounters at UCSF correlated strongly with results of Google searches in the United States for the term pink eye (ρ, 0.68 [95%CI, 0.52 to 0.78]; P < .001) and correlated moderately with Twitter results about pink eye (ρ, 0.38 [95%CI, 0.16 to 0.56]; P < .001) and with clinical diagnosis of influenza (ρ, 0.33 [95%CI, 0.12 to 0.49]; P < .001), but did not significantly correlate with seasonality of clinical diagnoses of allergic conjunctivitis diagnosis at UCSF (ρ, 0.21 [95%CI, −0.02 to 0.42]; P = .06) or with results of Google searches in the United States for the term eye allergy (ρ, 0.13 [95%CI, −0.06 to 0.32]; P = .19). Seasonality of clinical diagnoses of allergic conjunctivitis at UCSF correlated strongly with results of Google searches in the United States for the term eye allergy (ρ, 0.44 [95%CI, 0.24 to 0.60]; P < .001) and eye drops (ρ, 0.47 [95%CI, 0.27 to 0.62]; P < .001). CONCLUSIONS AND RELEVANCE Internet-based search engine and social media data may reflect the occurrence of clinically diagnosed conjunctivitis, suggesting that these data sources can be leveraged to better understand the epidemiologic factors of conjunctivitis. PMID:27416554

Science and technology integration for increased human potential and societal outcomes.

PubMed

Roco, Mihail C

2004-05-01

Unifying science based on the material unity of nature at the nanoscale provides a new foundation for knowledge, innovation, and integration of technology. Revolutionary and synergistic advances at the interfaces between previously separated fields of science, engineering and areas of relevance are ready to create nano-bio-info-cogno (NBIC) transforming tools. Developments in systems approach, mathematics, and computation in conjunction with NBIC allow us to understand the natural world and scientific research as closely coupled, complex, hierarchical entities. At this unique moment of scientific and technical achievement, improvement of human performance at individual and group levels, as well as development of suitable revolutionary products, becomes possible and these are primary goals for converging new technologies. NBIC addresses long-term advances in key areas of human activity, including working, learning, aging, group interaction, organizations, and human evolution ((Roco and Bainbridge, 2003)). Fundamentally new tools, technologies, and products will be integrated into individual and social human architecture. This introductory chapter of the Annals outlines research and education trends, funding activities, and the potential of development of revolutionary products and services.

Game theory and strategy in medical training.

PubMed

Blake, Amy; Carroll, Bryan T

2016-11-01

This paper analyses how game theory can provide a framework for understanding the strategic decision-making that occurs in everyday scenarios in medical training and practice, and ultimately serves as a tool for improving the work environment and patient care. Game theory has been applied to a variety of fields outside of its native economics, but has not been thoroughly studied in the context of health care provision. The paper discusses four of the most common 'games' and applies each to a scenario in medicine to provide new insight on the incentives and drivers for certain types of behaviour and a deeper understanding of why certain results are valued more strongly than others. Using game theory as an integrative tool, in conjunction with good judgement and a sound knowledge base, trainees and physicians can work to better recognise where competing priorities exist, understand the motivations and interactions of the various players, and learn to adjust their approaches in order to 'change the game' when their preferred outcome is not the most likely one. © 2016 John Wiley & Sons Ltd and The Association for the Study of Medical Education.

Health benefits achieved through the Seventh-Day Adventist Wellness Challenge program.

PubMed

Kamieneski, R; Brown, C M; Mitchell, C; Perrin, K M; Dindial, K

2000-11-01

The Wellness Challenge program introduces the philosophy of the healing power of God and stresses the importance of developing a sense of spirituality in conjunction with the promotion of good health. To employ scientific rigor to the outcome measures of the Seventh-Day Adventist Wellness Challenge program. A 2-tailed, paired sample t test. East Pasco Medical Center in Zephyrhills, Fla. 165 participants. Presurvey, 21-day outpatient wellness intervention; postsurvey, 6 weeks after completion of the program. Changes in behaviors related to cigarette smoking, alcohol use, eating patterns, exercise, water consumption, rest, relaxation, and time spent outdoors, as well as demographic data. Statistically significant differences were found between the pre- and postprogram clinical and laboratory test results for the participants' blood pressure, weight, glucose levels, and cholesterol at .05 alpha. Furthermore, self-health improvements measured by a pre- and postsurvey response confirmed statistically significant improvement in participants' willingness to improve their lifestyle behaviors for a potentially greater quality of life. The Wellness Challenge program offers ways to reduce risk factors related to chronic disease while improving the quality of life within an adult population by allowing people to slowly incorporate newly acquired tools into their everyday life.

Maneuver Planning for Conjunction Risk Mitigation with Ground-track Control Requirements

NASA Technical Reports Server (NTRS)

McKinley, David

2008-01-01

The planning of conjunction Risk Mitigation Maneuvers (RMM) in the presence of ground-track control requirements is analyzed. Past RMM planning efforts on the Aqua, Aura, and Terra spacecraft have demonstrated that only small maneuvers are available when ground-track control requirements are maintained. Assuming small maneuvers, analytical expressions for the effect of a given maneuver on conjunction geometry are derived. The analytical expressions are used to generate a large trade space for initial RMM design. This trade space represents a significant improvement in initial maneuver planning over existing methods that employ high fidelity maneuver models and propagation.

Selecting Tools to Model Integer and Binomial Multiplication

ERIC Educational Resources Information Center

Pratt, Sarah Smitherman; Eddy, Colleen M.

2017-01-01

Mathematics teachers frequently provide concrete manipulatives to students during instruction; however, the rationale for using certain manipulatives in conjunction with concepts may not be explored. This article focuses on area models that are currently used in classrooms to provide concrete examples of integer and binomial multiplication. The…

48 CFR 970.1504-1-8 - Special equipment purchases.

Code of Federal Regulations, 2010 CFR

2010-10-01

... boilers, generators, machine tools, and large electrical equipment. In some cases, it would also include... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Special equipment....1504-1-8 Special equipment purchases. (a) Special equipment is sometimes procured in conjunction with...

The development of organized visual search

PubMed Central

Woods, Adam J.; Goksun, Tilbe; Chatterjee, Anjan; Zelonis, Sarah; Mehta, Anika; Smith, Sabrina E.

2013-01-01

Visual search plays an important role in guiding behavior. Children have more difficulty performing conjunction search tasks than adults. The present research evaluates whether developmental differences in children's ability to organize serial visual search (i.e., search organization skills) contribute to performance limitations in a typical conjunction search task. We evaluated 134 children between the ages of 2 and 17 on separate tasks measuring search for targets defined by a conjunction of features or by distinct features. Our results demonstrated that children organize their visual search better as they get older. As children's skills at organizing visual search improve they become more accurate at locating targets with conjunction of features amongst distractors, but not for targets with distinct features. Developmental limitations in children's abilities to organize their visual search of the environment are an important component of poor conjunction search in young children. In addition, our findings provide preliminary evidence that, like other visuospatial tasks, exposure to reading may influence children's spatial orientation to the visual environment when performing a visual search. PMID:23584560

Scalable Conjunction Processing using Spatiotemporally Indexed Ephemeris Data

NASA Astrophysics Data System (ADS)

Budianto-Ho, I.; Johnson, S.; Sivilli, R.; Alberty, C.; Scarberry, R.

2014-09-01

The collision warnings produced by the Joint Space Operations Center (JSpOC) are of critical importance in protecting U.S. and allied spacecraft against destructive collisions and protecting the lives of astronauts during space flight. As the Space Surveillance Network (SSN) improves its sensor capabilities for tracking small and dim space objects, the number of tracked objects increases from thousands to hundreds of thousands of objects, while the number of potential conjunctions increases with the square of the number of tracked objects. Classical filtering techniques such as apogee and perigee filters have proven insufficient. Novel and orders of magnitude faster conjunction analysis algorithms are required to find conjunctions in a timely manner. Stellar Science has developed innovative filtering techniques for satellite conjunction processing using spatiotemporally indexed ephemeris data that efficiently and accurately reduces the number of objects requiring high-fidelity and computationally-intensive conjunction analysis. Two such algorithms, one based on the k-d Tree pioneered in robotics applications and the other based on Spatial Hash Tables used in computer gaming and animation, use, at worst, an initial O(N log N) preprocessing pass (where N is the number of tracked objects) to build large O(N) spatial data structures that substantially reduce the required number of O(N^2) computations, substituting linear memory usage for quadratic processing time. The filters have been implemented as Open Services Gateway initiative (OSGi) plug-ins for the Continuous Anomalous Orbital Situation Discriminator (CAOS-D) conjunction analysis architecture. We have demonstrated the effectiveness, efficiency, and scalability of the techniques using a catalog of 100,000 objects, an analysis window of one day, on a 64-core computer with 1TB shared memory. Each algorithm can process the full catalog in 6 minutes or less, almost a twenty-fold performance improvement over the baseline implementation running on the same machine. We will present an overview of the algorithms and results that demonstrate the scalability of our concepts.

Pharmacogenetic and optical dissection for mechanistic understanding of Parkinson's disease: potential utilities revealed through behavioural assessment.

PubMed

Sharma, Puneet; Pienaar, Ilse S

2014-11-01

The technology toolbox by which neural elements can be selectively manipulated in vertebrate and invertebrate brains has expanded greatly in recent years, to now include sophisticated optogenetics and novel designer receptors. Application of such tools allow for ascertaining whether a particular behavioural phenotype associates with interrogation of a specific neural circuit. Optogenetics has already found application in the study of Parkinson's disease (PD) circuitry and therapies, whereas novel designer receptors hold promise for enlightening on current understanding of the mechanisms underlying parkinsonian motor and non-motor symptoms. In particular, this new generation of research tools provide a method by which significant insights can be gained on brain networks implicated in brain diseases such as PD. These tools also promise to assist in the development of novel therapies for targeting degenerated dopaminergic and non-dopaminergic neurons in the diseased basal ganglia system of PD patients, for providing symptomatic relief or even reverse neurodegenerative processes. The present review discusses how such technologies, in conjunction with application of sensitive behavioural assays, continue to significantly advance our knowledge of circuit and signalling properties inherent to PD pathology. The discussion also highlights how such experimental approaches provide additional explorative avenues which may result in dramatically improved therapeutic options for PD patients. Copyright © 2014 Elsevier Ltd. All rights reserved.

A data base processor semantics specification package

NASA Technical Reports Server (NTRS)

Fishwick, P. A.

1983-01-01

A Semantics Specification Package (DBPSSP) for the Intel Data Base Processor (DBP) is defined. DBPSSP serves as a collection of cross assembly tools that allow the analyst to assemble request blocks on the host computer for passage to the DBP. The assembly tools discussed in this report may be effectively used in conjunction with a DBP compatible data communications protocol to form a query processor, precompiler, or file management system for the database processor. The source modules representing the components of DBPSSP are fully commented and included.

Catwalk grate lifting tool

DOEpatents

Gunter, L.W.

1992-08-11

A device is described for lifting catwalk grates comprising an elongated bent member with a handle at one end and a pair of notched braces and a hook at the opposite end that act in conjunction with each other to lock onto the grate and give mechanical advantage in lifting the grate. 10 figs.

Application of population sequencing (POPSEQ) for ordering and inputting genotyping-by-sequencing markers in hexaploid wheat

USDA-ARS?s Scientific Manuscript database

The advancement of next-generation sequencing technologies in conjunction with new bioinformatics tools enabled fine-tuning of sequence-based high resolution mapping strategies for complex genomes. Although genotyping-by-sequencing (GBS) provides a large number of markers, its application for assoc...

Consistent Query Answering of Conjunctive Queries under Primary Key Constraints

ERIC Educational Resources Information Center

Pema, Enela

2014-01-01

An inconsistent database is a database that violates one or more of its integrity constraints. In reality, violations of integrity constraints arise frequently under several different circumstances. Inconsistent databases have long posed the challenge to develop suitable tools for meaningful query answering. A principled approach for querying…

Digital Ink: In-Class Annotation of PowerPoint Lectures

ERIC Educational Resources Information Center

Johnson, Anne E.

2008-01-01

Digital ink is a tool that, in conjunction with Microsoft PowerPoint software, allows real-time freehand annotation of presentations. Annotation of slides during class encourages student engagement with the material and problems under discussion. Digital ink annotation is a technique suitable for teaching across many disciplines, but is especially…

Model Educational Specifications for Technology in Schools.

ERIC Educational Resources Information Center

Maryland State Dept. of Education, College Park. Office of Administration and Finance.

This description of the Model Edspec, which can be used by itself or in conjunction with the "Format Guide of Educational Specifications," serves as a comprehensive planning tool for the selection and application of technology. The model is designed to assist schools in implementing the facilities development process, thereby making…

ADenoVirus Initiative Study in Epidemiology (ADVISE): Results of a multicentric epidemiology study in Spain.

PubMed

Muñoz-Hernández, A M; Duquesroix, B; Benítez-Del-Castillo, J M

2018-03-01

Non-interventional, observational, epidemiology study to assess clinical characteristics and frequency of adenovirus conjunctivitis diagnosed by AdenoPlus ® in patients who presented with signs and symptoms of acute conjunctivitis. Safety aspects during use of the test were analyzed as well. This analysis presents the data obtained from the 386 patients enrolled in Spain. Patients had to present with acute signs and symptoms of conjunctivitis ≤7days. The minimum age was 1year old. Patients who had already used local antiviral therapies, topical steroids or immuno-modulators were not allowed to enter the study. A standardized questionnaire was used to collect patient's ocular history and test results. A total of 386 patients were recruited in 22 sites, being analyzed 329 patients. Among them, the percentage of "AdenoPlus ® positive" was 36,2% (119/329). Before the test was performed, in 84,1% of the cases, investigators believed that the conjunctivitis was of viral origin but only 50,3% of the investigators had their clinical assessment confirmed by the test. Patients who tested positive for adenoviral conjunctivitis presented higher percentages of signs and symptoms than the rest of the patients. None of the signs or symptoms could be qualified as pathognomonic of the disease, being difficult for the clinicians to perform an accurate diagnosis. AdenoPlus ® test is an antigen based immunoassay test that detects the presence of adenovirus directly from tears, and it can be an useful tool to help early differential diagnosis in patients with conjunctivitis signs and symptoms lasting for less than or equal to 7days. Copyright © 2017 Sociedad Española de Oftalmología. Publicado por Elsevier España, S.L.U. All rights reserved.

[The virological and epidemiological aspects of human adenoviral conjunctivitis in Tunisia].

PubMed

Fedaoui, N; Ben Ayed, N; Ben Yahia, A; Matri, L; Nacef, L; Triki, H

2017-01-01

Human adenoviruses (HAdV) are the main cause of viral conjunctivitis. In Tunisia and North Africa more generally, there is no regular nationwide surveillance program that monitors viruses causing conjunctivitis and keratoconjunctivitis. In this study, we report the results of HAdV screening in conjunctival samples collected for over 14 years in Tunisia. A total of 282 conjunctival samples received between 2000 and 2013 were investigated. Detection and identification of genotype were performed by PCR-sequencing at the hexon gene; 64.5% of samples (n=182) revealed positive by PCR detection without correlation noted between infection, age, sex, social class or clinical manifestations of viral conjunctivitis. HAdV-D8 was the largely predominant genotype in Tunisia, representing 81.3% of all isolates, and was detected continuously from 2000 to 2013. Minor co-circulating genotypes were also identified - HAdV-E4, HAdV-B3, B55 and HAdV-B7 - accounting for 10.7%, 4.9%, 1.9% and 0.9% of isolates, respectively. In conclusion, this work reports epidemiological data on adenoviral conjunctivitis from a region where such information is very scarce and contributes to a better knowledge of the worldwide distribution of causative genotypes. It also presents an approach for the identification of circulating HAdV in the country and demonstrates the importance of molecular tools for both detection and identification of genotypes, which allow rapid virological investigation, especially during epidemics. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

Multi-criteria decision analysis for health technology assessment in Canada: insights from an expert panel discussion.

PubMed

Diaby, Vakaramoko; Goeree, Ron; Hoch, Jeffrey; Siebert, Uwe

2015-02-01

Multi-criteria decision analysis (MCDA), a decision-making tool, has received increasing attention in recent years, notably in the healthcare field. For Canada, it is unclear whether and how MCDA should be incorporated into the existing health technology assessment (HTA) decision-making process. To facilitate debate on improving HTA decision-making in Canada, a workshop was held in conjunction with the 8th World Congress on Health Economics of the International Health Economics Association in Toronto, Canada in July 2011. The objective of the workshop was to discuss the potential benefits and challenges related to the use of MCDA for HTA decision-making in Canada. This paper summarizes and discusses the recommendations of an expert panel convened at the workshop to discuss opportunities and concerns with reference to the implementation of MCDA in Canada.

Exposure Models for the Prior Distribution in Bayesian Decision Analysis for Occupational Hygiene Decision Making

PubMed Central

Lee, Eun Gyung; Kim, Seung Won; Feigley, Charles E.; Harper, Martin

2015-01-01

This study introduces two semi-quantitative methods, Structured Subjective Assessment (SSA) and Control of Substances Hazardous to Health (COSHH) Essentials, in conjunction with two-dimensional Monte Carlo simulations for determining prior probabilities. Prior distribution using expert judgment was included for comparison. Practical applications of the proposed methods were demonstrated using personal exposure measurements of isoamyl acetate in an electronics manufacturing facility and of isopropanol in a printing shop. Applicability of these methods in real workplaces was discussed based on the advantages and disadvantages of each method. Although these methods could not be completely independent of expert judgments, this study demonstrated a methodological improvement in the estimation of the prior distribution for the Bayesian decision analysis tool. The proposed methods provide a logical basis for the decision process by considering determinants of worker exposure. PMID:23252451

ESA BRAT (Broadview Radar Altimetry Toolbox) and GUT (GOCE User Toolbox) toolboxes

NASA Astrophysics Data System (ADS)

Benveniste, J.; Ambrozio, A.; Restano, M.

2016-12-01

The Broadview Radar Altimetry Toolbox (BRAT) is a collection of tools designed to facilitate the processing of radar altimetry data from previous and current altimetry missions, including the upcoming Sentinel-3A L1 and L2 products. A tutorial is included providing plenty of use cases. BRAT's future release (4.0.0) is planned for September 2016. Based on the community feedback, the frontend has been further improved and simplified whereas the capability to use BRAT in conjunction with MATLAB/IDL or C/C++/Python/Fortran, allowing users to obtain desired data bypassing the data-formatting hassle, remains unchanged. Several kinds of computations can be done within BRAT involving the combination of data fields, that can be saved for future uses, either by using embedded formulas including those from oceanographic altimetry, or by implementing ad-hoc Python modules created by users to meet their needs. BRAT can also be used to quickly visualise data, or to translate data into other formats, e.g. from NetCDF to raster images. The GOCE User Toolbox (GUT) is a compilation of tools for the use and the analysis of GOCE gravity field models. It facilitates using, viewing and post-processing GOCE L2 data and allows gravity field data, in conjunction and consistently with any other auxiliary data set, to be pre-processed by beginners in gravity field processing, for oceanographic and hydrologic as well as for solid earth applications at both regional and global scales. Hence, GUT facilitates the extensive use of data acquired during GRACE and GOCE missions. In the current 3.0 version, GUT has been outfitted with a graphical user interface allowing users to visually program data processing workflows. Further enhancements aiming at facilitating the use of gradients, the anisotropic diffusive filtering, and the computation of Bouguer and isostatic gravity anomalies have been introduced. Packaged with GUT is also GUT's VCM (Variance-Covariance Matrix) tool for analysing GOCE's variance-covariance matrices. BRAT and GUT toolboxes can be freely downloaded, along with ancillary material, at https://earth.esa.int/brat and https://earth.esa.int/gut.

The BRAT and GUT Couple: Broadview Radar Altimetry and GOCE User Toolboxes

NASA Astrophysics Data System (ADS)

Benveniste, J.; Restano, M.; Ambrózio, A.

2017-12-01

The Broadview Radar Altimetry Toolbox (BRAT) is a collection of tools designed to facilitate the processing of radar altimetry data from previous and current altimetry missions, including Sentinel-3A L1 and L2 products. A tutorial is included providing plenty of use cases. BRAT's next release (4.2.0) is planned for October 2017. Based on the community feedback, the front-end has been further improved and simplified whereas the capability to use BRAT in conjunction with MATLAB/IDL or C/C++/Python/Fortran, allowing users to obtain desired data bypassing the data-formatting hassle, remains unchanged. Several kinds of computations can be done within BRAT involving the combination of data fields, that can be saved for future uses, either by using embedded formulas including those from oceanographic altimetry, or by implementing ad-hoc Python modules created by users to meet their needs. BRAT can also be used to quickly visualise data, or to translate data into other formats, e.g. from NetCDF to raster images. The GOCE User Toolbox (GUT) is a compilation of tools for the use and the analysis of GOCE gravity field models. It facilitates using, viewing and post-processing GOCE L2 data and allows gravity field data, in conjunction and consistently with any other auxiliary data set, to be pre-processed by beginners in gravity field processing, for oceanographic and hydrologic as well as for solid earth applications at both regional and global scales. Hence, GUT facilitates the extensive use of data acquired during GRACE and GOCE missions. In the current 3.1 version, GUT has been outfitted with a graphical user interface allowing users to visually program data processing workflows. Further enhancements aiming at facilitating the use of gradients, the anisotropic diffusive filtering, and the computation of Bouguer and isostatic gravity anomalies have been introduced. Packaged with GUT is also GUT's Variance-Covariance Matrix tool (VCM). BRAT and GUT toolboxes can be freely downloaded, along with ancillary material, at https://earth.esa.int/brat and https://earth.esa.int/gut.

Omega-3 fatty acids and changes in LBM: alone or in synergy for better muscle health?

PubMed

McDonald, Cameron; Bauer, Judy; Capra, Sandra

2013-06-01

Myopenia or muscle wasting due to ageing, chronic disease, and various medical interventions has been associated with increased mortality, morbidity, and poorer physical function. Attempts through nutrient and exercise interventions have been made to prevent this deterioration. In addition, while a measure of lean body mass (LBM) is associated with health outcomes, LBM function may be a better prognostic tool. Long-chain omega-3 fatty acids (LCn-3s) are nutrients that may mitigate LBM losses in noncancer populations. The purpose of this review is to determine whether LCn-3s have a role in LBM sparing in noncancer populations, to establish a minimum dose and duration of LCn-3s that will result in LBM change, and to summarise the potential effects of LCn-3s on LBM function when combined with an anabolic stimulus. Overall, in noncancer populations, LCn-3s have limited utility in sparing LBM during energy balance, energy restriction, or in conjunction with aerobic exercise. Further investigations are required to determine the appropriate dose and duration of LCn-3s for optimal LBM function. Finally, compelling evidence exists for LCn-3s in conjunction with an anabolic stimulus to improve LBM function and quality. Functionality of LBM tissue is an important outcome for population health, and LCn-3s show some promise, albeit pending further study.

Key Topics for High-Lift Research: A Joint Wind Tunnel/Flight Test Approach

NASA Technical Reports Server (NTRS)

Fisher, David; Thomas, Flint O.; Nelson, Robert C.

1996-01-01

Future high-lift systems must achieve improved aerodynamic performance with simpler designs that involve fewer elements and reduced maintenance costs. To expeditiously achieve this, reliable CFD design tools are required. The development of useful CFD-based design tools for high lift systems requires increased attention to unresolved flow physics issues. The complex flow field over any multi-element airfoil may be broken down into certain generic component flows which are termed high-lift building block flows. In this report a broad spectrum of key flow field physics issues relevant to the design of improved high lift systems are considered. It is demonstrated that in-flight experiments utilizing the NASA Dryden Flight Test Fixture (which is essentially an instrumented ventral fin) carried on an F-15B support aircraft can provide a novel and cost effective method by which both Reynolds and Mach number effects associated with specific high lift building block flows can be investigated. These in-flight high lift building block flow experiments are most effective when performed in conjunction with coordinated ground based wind tunnel experiments in low speed facilities. For illustrative purposes three specific examples of in-flight high lift building block flow experiments capable of yielding a high payoff are described. The report concludes with a description of a joint wind tunnel/flight test approach to high lift aerodynamics research.

SOAP based web services and their future role in VO projects

NASA Astrophysics Data System (ADS)

Topf, F.; Jacquey, C.; Génot, V.; Cecconi, B.; André, N.; Zhang, T. L.; Kallio, E.; Lammer, H.; Facsko, G.; Stöckler, R.; Khodachenko, M.

2011-10-01

Modern state-of-the-art web services are from crucial importance for the interoperability of different VO tools existing in the planetary community. SOAP based web services assure the interconnectability between different data sources and tools by providing a common protocol for communication. This paper will point out a best practice approach with the Automated Multi-Dataset Analysis Tool (AMDA) developed by CDPP, Toulouse and the provision of VEX/MAG data from a remote database located at IWF, Graz. Furthermore a new FP7 project IMPEx will be introduced with a potential usage example of AMDA web services in conjunction with simulation models.

Human dorsolateral prefrontal cortex is involved in visual search for conjunctions but not features: a theta TMS study.

PubMed

Kalla, Roger; Muggleton, Neil G; Cowey, Alan; Walsh, Vincent

2009-10-01

Functional neuroimaging studies have shown that the detection of a target defined by more than one feature (for example, a conjunction of colour and orientation) amongst distractors is associated with the activation of a network of brain areas. Dorsolateral prefrontal cortex (DLPFC), along with areas such as the frontal eye fields (FEF) and posterior parietal cortex (PPC), is a component of this network. While transcranial magnetic stimulation (TMS) had shown that both FEF and PPC are necessary for, and not just correlated with, successful conjunction search, this is not the case for DLPFC. To test the hypothesis that this area is also necessary for efficient conjunction search, TMS was applied over DLPFC and the effects on conjunction and feature (in this case colour) search performance compared with those when TMS was delivered over area MT/V5 and a vertex control stimulation condition. DLPFC TMS impaired performance on the conjunction search task but was without effect on feature search, similar to findings when TMS is delivered over PPC or FEF. Vertex TMS had no effects whereas MT/V5 TMS significantly improved performance with a time course that may indicate that this was due to modulation of V4 activity. These findings illustrate that, like FEF and PPC, DLPFC is necessary for fully effective conjunction visual search performance.

What if Finding Data was as Easy as Subscribing to the News?

NASA Astrophysics Data System (ADS)

Duerr, R. E.

2011-12-01

Data are the "common wealth of humanity," the fuel that drives the sciences; but much of the data that exist are inaccessible, buried in one of numerous stove-piped data systems, or entirely hidden unless you have direct knowledge of and contact with the investigator that acquired them. Much of the "wealth" is squandered and overall scientific progress inhibited, a situation that is becoming increasingly untenable with the openness required by data-driven science. What are needed are simple interoperability protocols and advertising mechanisms that allow data from disparate data systems to be easily discovered, explored, and accessed. The tools must be simple enough that individual investigators can use them without IT support. The tools cannot rely on centralized repositories or registries but must enable the development of ad-hoc or special purpose aggregations of data and services tailored to individual community needs. In addition, the protocols must scale to support the discovery of and access to the holdings of the global, interdisciplinary community, be they individual investigators or major data centers. NSIDC, in conjunction with other members of the Federation of Earth Science Information Partners and the Polar Information Commons, are working on just such a suite of tools and protocols. In this talk, I discuss data and service casting, aggregation, data badging, and OpenSearch - a suite of tools and protocols which, when used in conjunction with each other, have the potential of completely changing the way that data and services worldwide are discovered and used.

Utilization of manual therapy to the lumbar spine in conjunction with traditional conservative care for individuals with bilateral lower extremity complex regional pain syndrome: A case series.

PubMed

Walston, Zachary; Hernandez, Luis; Yake, Dale

2018-06-06

Conservative therapies for complex regional pain syndrome (CRPS) have traditionally focused on exercise and desensitization techniques targeted at the involved extremity. The primary purpose of this case series is to report on the potential benefit of utilizing manual therapy to the lumbar spine in conjunction with traditional conservative care when treating patients with lower extremity CRPS. Two patients with the diagnosis of lower extremity CRPS were treated with manual therapy to the lumbar spine in conjunction with education, exercise, desensitization, and soft tissue techniques for the extremity. Patient 1 received 13 sessions over 6 weeks resulting in a 34-point improvement in oswestry disability index (ODI) and 35-point improvement in lower extremity functional scale (LEFS). Patient 2 received 21 sessions over 12 weeks resulting in a 28-point improvement in ODI and a 41-point improvement in LEFS. Both patients exhibited reductions in pain and clinically meaningful improvements in function. Manual therapies when applied to the lumbar spine in these patients as part of a comprehensive treatment plan resulted in improved spinal mobility, decreased pain, and reduction is distal referred symptoms. Although one cannot infer a cause and effect relationship from a case series, this report identifies meaningful clinical outcomes potentially associated with manual physical therapy to the lumbar spine for two patients with complex regional pain syndrome type 1.

The Application of High-Resolution Electron Microscopy to Problems in Solid State Chemistry: The Exploits of a Peeping TEM.

ERIC Educational Resources Information Center

Eyring, LeRoy

1980-01-01

Describes methods for using the high-resolution electron microscope in conjunction with other tools to reveal the identity and environment of atoms. Problems discussed include the ultimate structure of real crystalline solids including defect structure and the mechanisms of chemical reactions. (CS)

Sensitive genotyping of foodborne-associated human noroviruses and hepatitis A virus using an array-based platform

USDA-ARS?s Scientific Manuscript database

The viral pathogens, human norovirus (NoV) and hepatitis A virus (HAV), are significant contributors of foodborne associated outbreaks. To develop a typing tool for foodborne viruses, a focused, low-density DNA microarray was developed in conjunction with a rapid and high-throughput fluorescent meth...

A Matlab/Simulink-Based Interactive Module for Servo Systems Learning

ERIC Educational Resources Information Center

Aliane, N.

2010-01-01

This paper presents an interactive module for learning both the fundamental and practical issues of servo systems. This module, developed using Simulink in conjunction with the Matlab graphical user interface (Matlab-GUI) tool, is used to supplement conventional lectures in control engineering and robotics subjects. First, the paper introduces the…

Ecosystem services and emergent vulnerability in managed ecosystems: A geospatial decision-support tool

Treesearch

Colin M. Beier; Trista M. Patterson; F. Stuart Chapin III

2008-01-01

Managed ecosystems experience vulnerabilities when ecological resilience declines and key flows of ecosystem services become depleted or lost. Drivers of vulnerability often include local management actions in conjunction with other external, larger scale factors. To translate these concepts to management applications, we developed a conceptual model of feedbacks...

The Shorewood Collection Art Reference Guide.

ERIC Educational Resources Information Center

1992

This reference guide contains a descriptive critique of each of more than 900 images of paintings and drawings presented in "The Shorewood Collection." This guide is intended to be used as a reference tool in conjunction with Shorewood's art educational programs, which range from grade levels K through 12. Master works from major epochs in the…

Autonomous Learning through Task-Based Instruction in Fully Online Language Courses

ERIC Educational Resources Information Center

Lee, Lina

2016-01-01

This study investigated the affordances for autonomous learning in a fully online learning environment involving the implementation of task-based instruction in conjunction with Web 2.0 technologies. To that end, four-skill-integrated tasks and digital tools were incorporated into the coursework. Data were collected using midterm reflections,…

Interactive Whiteboards and Implications for Use in Education

ERIC Educational Resources Information Center

Gibson, Danita C.

2013-01-01

Interactive whiteboards (IWBs) have increasingly become a technology tool used in the educational field. IWBs are touch-sensitive screens that work in conjunction with a computer and a projector, and which are used to display information from a computer. As a qualitative case study, this study investigated the SMART Board-infused instructional…

Conjunctive management of surface and groundwater resources under projected future climate change scenarios

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mani, Amir; Tsai, Frank T. -C.; Kao, Shih-Chieh

Our study introduces a mixed integer linear fractional programming (MILFP) method to optimize conjunctive use of future surface water and groundwater resources under projected climate change scenarios. The conjunctive management model maximizes the ratio of groundwater usage to reservoir water usage. Future inflows to the reservoirs were estimated from the future runoffs projected through hydroclimate modeling considering the Variable Infiltration Capacity model, and 11 sets of downscaled Coupled Model Intercomparison Project phase 5 global climate model projections. Bayesian model averaging was adopted to quantify uncertainty in future runoff projections and reservoir inflow projections due to uncertain future climate projections. Optimizedmore » conjunctive management solutions were investigated for a water supply network in northern Louisiana which includes the Sparta aquifer. Runoff projections under climate change scenarios indicate that runoff will likely decrease in winter and increase in other seasons. Ultimately, results from the developed conjunctive management model with MILFP indicate that the future reservoir water, even at 2.5% low inflow cumulative probability level, could counterbalance groundwater pumping reduction to satisfy demands while improving the Sparta aquifer through conditional groundwater head constraint.« less

Conjunctive management of surface and groundwater resources under projected future climate change scenarios

DOE PAGES

Mani, Amir; Tsai, Frank T. -C.; Kao, Shih-Chieh; ...

2016-06-16

Our study introduces a mixed integer linear fractional programming (MILFP) method to optimize conjunctive use of future surface water and groundwater resources under projected climate change scenarios. The conjunctive management model maximizes the ratio of groundwater usage to reservoir water usage. Future inflows to the reservoirs were estimated from the future runoffs projected through hydroclimate modeling considering the Variable Infiltration Capacity model, and 11 sets of downscaled Coupled Model Intercomparison Project phase 5 global climate model projections. Bayesian model averaging was adopted to quantify uncertainty in future runoff projections and reservoir inflow projections due to uncertain future climate projections. Optimizedmore » conjunctive management solutions were investigated for a water supply network in northern Louisiana which includes the Sparta aquifer. Runoff projections under climate change scenarios indicate that runoff will likely decrease in winter and increase in other seasons. Ultimately, results from the developed conjunctive management model with MILFP indicate that the future reservoir water, even at 2.5% low inflow cumulative probability level, could counterbalance groundwater pumping reduction to satisfy demands while improving the Sparta aquifer through conditional groundwater head constraint.« less

A novel herpesvirus associated with chronic superficial keratitis and proliferative conjunctivitis in a great horned owl (Bubo virginianus).

PubMed

Gleeson, Molly D; Moore, Bret A; Edwards, Sydney G; Stevens, Sarah; Childress, April L; Wellehan, James F X; Robertson, Jessica; Murphy, Christopher J; Hawkins, Michelle G; Paul-Murphy, Joanne

2018-04-14

An adult great-horned owl (Bubo virginianus; GHOW) presented with a history of recurrent corneal ulceration of the right eye (OD). Findings included ulcerative superficial keratitis, proliferative conjunctivitis, and iris pigmentary changes. The ulcer was initially nonresponsive to medical therapy, but showed rapid and appropriate healing following diamond burr debridement. Proliferative conjunctivitis markedly improved following topical antiviral therapy with cidofovir 1%, interferon alpha 2B ophthalmic solutions, and oral l-lysine. Histopathologic evaluation of a conjunctival biopsy revealed epithelial features suspicious for viral cytopathic changes and intranuclear structures suspicious for viral inclusions, suggestive of a possible viral-induced papillomatous conjunctivitis. A novel alphaherpesvirus, referred to as Strigid Herpesvirus 1 (StrHV1), was identified using PCR and gene sequencing. This case represents a new clinical manifestation of a previously unreported herpesvirus in the GHOW. Identification of the herpes virus was critical to administration of appropriate therapy and resolution of the conjunctivitis, and corneal epithelial debridement promoted resolution of the chronic corneal epithelial defect. © 2018 American College of Veterinary Ophthalmologists.

Feature engineering for drug name recognition in biomedical texts: feature conjunction and feature selection.

PubMed

Liu, Shengyu; Tang, Buzhou; Chen, Qingcai; Wang, Xiaolong; Fan, Xiaoming

2015-01-01

Drug name recognition (DNR) is a critical step for drug information extraction. Machine learning-based methods have been widely used for DNR with various types of features such as part-of-speech, word shape, and dictionary feature. Features used in current machine learning-based methods are usually singleton features which may be due to explosive features and a large number of noisy features when singleton features are combined into conjunction features. However, singleton features that can only capture one linguistic characteristic of a word are not sufficient to describe the information for DNR when multiple characteristics should be considered. In this study, we explore feature conjunction and feature selection for DNR, which have never been reported. We intuitively select 8 types of singleton features and combine them into conjunction features in two ways. Then, Chi-square, mutual information, and information gain are used to mine effective features. Experimental results show that feature conjunction and feature selection can improve the performance of the DNR system with a moderate number of features and our DNR system significantly outperforms the best system in the DDIExtraction 2013 challenge.

Data sharing in neuroimaging research

PubMed Central

Poline, Jean-Baptiste; Breeze, Janis L.; Ghosh, Satrajit; Gorgolewski, Krzysztof; Halchenko, Yaroslav O.; Hanke, Michael; Haselgrove, Christian; Helmer, Karl G.; Keator, David B.; Marcus, Daniel S.; Poldrack, Russell A.; Schwartz, Yannick; Ashburner, John; Kennedy, David N.

2012-01-01

Significant resources around the world have been invested in neuroimaging studies of brain function and disease. Easier access to this large body of work should have profound impact on research in cognitive neuroscience and psychiatry, leading to advances in the diagnosis and treatment of psychiatric and neurological disease. A trend toward increased sharing of neuroimaging data has emerged in recent years. Nevertheless, a number of barriers continue to impede momentum. Many researchers and institutions remain uncertain about how to share data or lack the tools and expertise to participate in data sharing. The use of electronic data capture (EDC) methods for neuroimaging greatly simplifies the task of data collection and has the potential to help standardize many aspects of data sharing. We review here the motivations for sharing neuroimaging data, the current data sharing landscape, and the sociological or technical barriers that still need to be addressed. The INCF Task Force on Neuroimaging Datasharing, in conjunction with several collaborative groups around the world, has started work on several tools to ease and eventually automate the practice of data sharing. It is hoped that such tools will allow researchers to easily share raw, processed, and derived neuroimaging data, with appropriate metadata and provenance records, and will improve the reproducibility of neuroimaging studies. By providing seamless integration of data sharing and analysis tools within a commodity research environment, the Task Force seeks to identify and minimize barriers to data sharing in the field of neuroimaging. PMID:22493576

Results of a multicentre randomised controlled trial of statistical process control charts and structured diagnostic tools to reduce ward-acquired meticillin-resistant Staphylococcus aureus: the CHART Project.

PubMed

Curran, E; Harper, P; Loveday, H; Gilmour, H; Jones, S; Benneyan, J; Hood, J; Pratt, R

2008-10-01

Statistical process control (SPC) charts have previously been advocated for infection control quality improvement. To determine their effectiveness, a multicentre randomised controlled trial was undertaken to explore whether monthly SPC feedback from infection control nurses (ICNs) to healthcare workers of ward-acquired meticillin-resistant Staphylococcus aureus (WA-MRSA) colonisation or infection rates would produce any reductions in incidence. Seventy-five wards in 24 hospitals in the UK were randomised into three arms: (1) wards receiving SPC chart feedback; (2) wards receiving SPC chart feedback in conjunction with structured diagnostic tools; and (3) control wards receiving neither type of feedback. Twenty-five months of pre-intervention WA-MRSA data were compared with 24 months of post-intervention data. Statistically significant and sustained decreases in WA-MRSA rates were identified in all three arms (P<0.001; P=0.015; P<0.001). The mean percentage reduction was 32.3% for wards receiving SPC feedback, 19.6% for wards receiving SPC and diagnostic feedback, and 23.1% for control wards, but with no significant difference between the control and intervention arms (P=0.23). There were significantly more post-intervention 'out-of-control' episodes (P=0.021) in the control arm (averages of 0.60, 0.28, and 0.28 for Control, SPC and SPC+Tools wards, respectively). Participants identified SPC charts as an effective communication tool and valuable for disseminating WA-MRSA data.

Single-case synthesis tools I: Comparing tools to evaluate SCD quality and rigor.

PubMed

Zimmerman, Kathleen N; Ledford, Jennifer R; Severini, Katherine E; Pustejovsky, James E; Barton, Erin E; Lloyd, Blair P

2018-03-03

Tools for evaluating the quality and rigor of single case research designs (SCD) are often used when conducting SCD syntheses. Preferred components include evaluations of design features related to the internal validity of SCD to obtain quality and/or rigor ratings. Three tools for evaluating the quality and rigor of SCD (Council for Exceptional Children, What Works Clearinghouse, and Single-Case Analysis and Design Framework) were compared to determine if conclusions regarding the effectiveness of antecedent sensory-based interventions for young children changed based on choice of quality evaluation tool. Evaluation of SCD quality differed across tools, suggesting selection of quality evaluation tools impacts evaluation findings. Suggestions for selecting an appropriate quality and rigor assessment tool are provided and across-tool conclusions are drawn regarding the quality and rigor of studies. Finally, authors provide guidance for using quality evaluations in conjunction with outcome analyses when conducting syntheses of interventions evaluated in the context of SCD. Copyright © 2018 Elsevier Ltd. All rights reserved.

A critical care network pressure ulcer prevention quality improvement project.

PubMed

McBride, Joanna; Richardson, Annette

2015-03-30

Pressure ulcer prevention is an important safety issue, often underrated and an extremely painful event harming patients. Critically ill patients are one of the highest risk groups in hospital. The impact of pressure ulcers are wide ranging, and they can result in increased critical care and the hospital length of stay, significant interference with functional recovery and rehabilitation and increase cost. This quality improvement project had four aims: (1) to establish a critical care network pressure ulcer prevention group; (2) to establish baseline pressure ulcer prevention practices; (3) to measure, compare and monitor pressure ulcers prevalence; (4) to develop network pressure ulcer prevention standards. The approach used to improve quality included strong critical care nursing leadership to develop a cross-organisational pressure ulcer prevention group and a benchmarking exercise of current practices across a well-established critical care Network in the North of England. The National Safety Thermometer tool was used to measure pressure ulcer prevalence in 23 critical care units, and best available evidence, local consensus and another Critical Care Networks' bundle of interventions were used to develop a local pressure ulcer prevention standards document. The aims of the quality improvement project were achieved. This project was driven by successful leadership and had an agreed common goal. The National Safety Thermometer tool was an innovative approach to measure and compare pressure ulcer prevalence rates at a regional level. A limitation was the exclusion of moisture lesions. The project showed excellent engagement and collaborate working in the quest to prevent pressure ulcers from many critical care nurses with the North of England Critical Care Network. A concise set of Network standards was developed for use in conjunction with local guidelines to enhance pressure ulcer prevention. © 2015 British Association of Critical Care Nurses.

Aphasia therapy on a neuroscience basis

PubMed Central

Pulvermüller, Friedemann; Berthier, Marcelo L.

2008-01-01

Background Brain research has documented that the cortical mechanisms for language and action are tightly interwoven and, concurrently, new approaches to language therapy in neurological patients are being developed that implement language training in the context of relevant linguistic and non-linguistic actions, therefore taking advantage of the mutual connections of language and action systems in the brain. A further well-known neuroscience principle is that learning at the neuronal level is driven by correlation; consequently, new approaches to language therapy emphasise massed practice in a short time, thus maximising therapy quantity and frequency and, therefore, correlation at the behavioural and neuronal levels. Learned non-use of unsuccessful actions plays a major role in the chronification of neurological deficits, and behavioural approaches to therapy have therefore employed shaping and other learning techniques to counteract such non-use. Aims Advances in theoretical and experimental neuroscience have important implications for clinical practice. We exemplify this in the domain of aphasia rehabilitation. Main Contribution Whereas classical wisdom had been that aphasia cannot be significantly improved at a chronic stage, we here review evidence that one type of intensive language-action therapy (ILAT)—constraint-induced aphasia therapy—led to significant improvement of language performance in patients with chronic aphasia. We discuss perspectives for further improving speech-language therapy, including drug treatment that may be particularly fruitful when applied in conjunction with behavioural treatment. In a final section we highlight intensive and rapid therapy studies in chronic aphasia as a unique tool for exploring the cortical reorganisation of language. Conclusions We conclude that intensive language action therapy is an efficient tool for improving language functions even at chronic stages of aphasia. Therapy studies using this technique can open new perspectives for research into the plasticity of human language circuits. PMID:18923644

Efficacy of Carcass Electrical Stimulation in Meat Quality Enhancement: A Review

PubMed Central

Adeyemi, Kazeem Dauda; Sazili, Awis Qurni

2014-01-01

The use of electrical stimulation (ES) as a management tool to improve meat quality and efficiency of meat processing is reviewed. The basis of the efficacy of ES is its ability to fast track postmortem glycolysis, which in turn stimulates myriad histological, physical, biochemical, biophysical and physiological changes in the postmortem muscle. Electrical stimulation hastens the onset and resolution of rigor mortis thereby reducing processing time and labor and plays a vital role in improving meat tenderness and other meat quality traits. However, ES may have negative impacts on some meat quality traits such as color stability and water holding capacity in some animals. Electrical stimulation is not an end in itself. In order to achieve the desired benefits from its application, the technique must be properly used in conjunction with various intricate antemortem, perimortem and postmortem management practices. Despite extensive research on ES, the fundamental mechanisms and the appropriate commercial applications remained obscured. In addition, muscles differ in their response to ES. Thus, elementary knowledge of the various alterations with respect to muscle type is needed in order to optimize the effectiveness of ES in the improvement of meat quality. PMID:25049973

Spatial Pattern Classification for More Accurate Forecasting of Variable Energy Resources

NASA Astrophysics Data System (ADS)

Novakovskaia, E.; Hayes, C.; Collier, C.

2014-12-01

The accuracy of solar and wind forecasts is becoming increasingly essential as grid operators continue to integrate additional renewable generation onto the electric grid. Forecast errors affect rate payers, grid operators, wind and solar plant maintenance crews and energy traders through increases in prices, project down time or lost revenue. While extensive and beneficial efforts were undertaken in recent years to improve physical weather models for a broad spectrum of applications these improvements have generally not been sufficient to meet the accuracy demands of system planners. For renewables, these models are often used in conjunction with additional statistical models utilizing both meteorological observations and the power generation data. Forecast accuracy can be dependent on specific weather regimes for a given location. To account for these dependencies it is important that parameterizations used in statistical models change as the regime changes. An automated tool, based on an artificial neural network model, has been developed to identify different weather regimes as they impact power output forecast accuracy at wind or solar farms. In this study, improvements in forecast accuracy were analyzed for varying time horizons for wind farms and utility-scale PV plants located in different geographical regions.

Making Debris Avoidance Decisions for ESMO's EOS Mission Set

NASA Technical Reports Server (NTRS)

Mantziaras, Dimitrios

2016-01-01

The presentation will cover the aspects of making debris risk decisions from the NASA Mission Director's perspective, specifically for NASA Earth Science Mission Operations (ESMO) Earth Observing System (EOS) mission set. ESMO has been involved in analyzing potential debris risk conjunctions with secondary objects since the inception of this discipline. Through the cumulated years of experience and continued exposure to various debris scenarios, ESMO's understanding of the problem and process to deal with this issue has evolved. The presentation will describe the evolution of the ESMO process, specifically as it relates to the maneuver execution and spacecraft risk management decision process. It will briefly cover the original Drag Make-Up Maneuver, several day, methodical manually intensive, ramp up waive off approach, to the present day more automated, pre-canned onboard command, tools based approach. The presentation will also cover the key information needed to make debris decisions and challenges in doing so while still trying to meet science goals, constellation constraints and manage resources. A slide or two at the end of the presentation, will be devoted to discussing what further improvements could be helpful to improve decision making and future process improvement plans challenges.

Communications with Mars During Periods of Solar Conjunction: Initial Study Results

NASA Astrophysics Data System (ADS)

Morabito, D.; Hastrup, R.

2001-07-01

During the initial phase of the human exploration of Mars, a reliable communications link to and from Earth will be required. The direct link can easily be maintained during most of the 780-day Earth-Mars synodic period. However, during periods in which the direct Earth-Mars link encounters increased intervening charged particles during superior solar conjunctions of Mars, the resultant effects are expected to corrupt the data signals to varying degrees. The purpose of this article is to explore possible strategies, provide recommendations, and identify options for communicating over this link during periods of solar conjunctions. A significant improvement in telemetry data return can be realized by using the higher frequency 32 GHz (Ka-band), which is less susceptible to solar effects. During the era of the onset of probable human exploration of Mars, six superior conjunctions were identified from 2015 to 2026. For five of these six conjunctions, where the signal source is not occulted by the disk of the Sun, continuous communications with Mars should be achievable. Only during the superior conjunction of 2023 is the signal source at Mars expected to lie behind the disk of the Sun for about one day and within two solar radii (0. 5 deg) for about three days.

Playing shooter and driving videogames improves top-down guidance in visual search.

PubMed

Wu, Sijing; Spence, Ian

2013-05-01

Playing action videogames is known to improve visual spatial attention and related skills. Here, we showed that playing action videogames also improves classic visual search, as well as the ability to locate targets in a dual search that mimics certain aspects of an action videogame. In Experiment 1A, first-person shooter (FPS) videogame players were faster than nonplayers in both feature search and conjunction search, and in Experiment 1B, they were faster and more accurate in a peripheral search and identification task while simultaneously performing a central search. In Experiment 2, we showed that 10 h of play could improve the performance of nonplayers on each of these tasks. Three different genres of videogames were used for training: two action games and a 3-D puzzle game. Participants who played an action game (either an FPS or a driving game) achieved greater gains on all search tasks than did those who trained using the puzzle game. Feature searches were faster after playing an action videogame, suggesting that players developed a better target template to guide search in a top-down manner. The results of the dual search suggest that, in addition to enhancing the ability to divide attention, playing an action game improves the top-down guidance of attention to possible target locations. The results have practical implications for the development of training tools to improve perceptual and cognitive skills.

Improved Analysis of Earth System Models and Observations using Simple Climate Models

NASA Astrophysics Data System (ADS)

Nadiga, B. T.; Urban, N. M.

2016-12-01

Earth system models (ESM) are the most comprehensive tools we have to study climate change and develop climate projections. However, the computational infrastructure required and the cost incurred in running such ESMs precludes direct use of such models in conjunction with a wide variety of tools that can further our understanding of climate. Here we are referring to tools that range from dynamical systems tools that give insight into underlying flow structure and topology to tools that come from various applied mathematical and statistical techniques and are central to quantifying stability, sensitivity, uncertainty and predictability to machine learning tools that are now being rapidly developed or improved. Our approach to facilitate the use of such models is to analyze output of ESM experiments (cf. CMIP) using a range of simpler models that consider integral balances of important quantities such as mass and/or energy in a Bayesian framework.We highlight the use of this approach in the context of the uptake of heat by the world oceans in the ongoing global warming. Indeed, since in excess of 90% of the anomalous radiative forcing due greenhouse gas emissions is sequestered in the world oceans, the nature of ocean heat uptake crucially determines the surface warming that is realized (cf. climate sensitivity). Nevertheless, ESMs themselves are never run long enough to directly assess climate sensitivity. So, we consider a range of models based on integral balances--balances that have to be realized in all first-principles based models of the climate system including the most detailed state-of-the art climate simulations. The models range from simple models of energy balance to those that consider dynamically important ocean processes such as the conveyor-belt circulation (Meridional Overturning Circulation, MOC), North Atlantic Deep Water (NADW) formation, Antarctic Circumpolar Current (ACC) and eddy mixing. Results from Bayesian analysis of such models using both ESM experiments and actual observations are presented. One such result points to the importance of direct sequestration of heat below 700 m, a process that is not allowed for in the simple models that have been traditionally used to deduce climate sensitivity.

Engine Structural Analysis Software

NASA Technical Reports Server (NTRS)

McKnight, R. L.; Maffeo, R. J.; Schrantz, S.; Hartle, M. S.; Bechtel, G. S.; Lewis, K.; Ridgway, M.; Chamis, Christos C. (Technical Monitor)

2001-01-01

The report describes the technical effort to develop: (1) geometry recipes for nozzles, inlets, disks, frames, shafts, and ducts in finite element form, (2) component design tools for nozzles, inlets, disks, frames, shafts, and ducts which utilize the recipes and (3) an integrated design tool which combines the simulations of the nozzles, inlets, disks, frames, shafts, and ducts with the previously developed combustor, turbine blade, and turbine vane models for a total engine representation. These developments will be accomplished in cooperation and in conjunction with comparable efforts of NASA Glenn Research Center.

Improvements in Low-cost Ultrasonic Measurements of Blood Flow in "by-passes" Using Narrow & Broad Band Transit-time Procedures

NASA Astrophysics Data System (ADS)

Ramos, A.; Calas, H.; Diez, L.; Moreno, E.; Prohías, J.; Villar, A.; Carrillo, E.; Jiménez, A.; Pereira, W. C. A.; Von Krüger, M. A.

The cardio-pathology by ischemia is an important cause of death, but the re-vascularization of coronary arteries (by-pass operation) is an useful solution to reduce associated morbidity improving quality of life in patients. During these surgeries, the flow in coronary vessels must be measured, using non-invasive ultrasonic methods, known as transit time flow measurements (TTFM), which are the most accurate option nowadays. TTFM is a common intra-operative tool, in conjunction with classic Doppler velocimetry, to check the quality of these surgery processes for implanting grafts in parallel with the coronary arteries. This work shows important improvements achieved in flow-metering, obtained in our research laboratories (CSIC, ICIMAF, COPPE) and tested under real surgical conditions in Cardiocentro-HHA, for both narrowband NB and broadband BB regimes, by applying results of a CYTED multinational project (Ultrasonic & computational systems for cardiovascular diagnostics). mathematical models and phantoms were created to evaluate accurately flow measurements, in laboratory conditions, before our new electronic designs and low-cost implementations, improving previous ttfm systems, which include analogic detection, acquisition & post-processing, and a portable PC. Both regimes (NB and BB), with complementary performances for different conditions, were considered. Finally, specific software was developed to offer facilities to surgeons in their interventions.

Nutrition and Aging: a Practicing Oncologist's Perspective.

PubMed

Jain, Rishi; Dotan, Efrat

2017-09-07

Malnutrition is common in patients with cancer and is associated with a variety of negative outcomes. These can include reduced treatment tolerance and worsened cancer prognosis. Various aspects of aging, including sensory, physical, or psychosocial changes, place older patients at a particularly high risk for malnutrition, and these geriatric factors must be identified early and addressed. Despite the lack of available evidence on the optimal nutritional interventions for older adults with cancer, the oncologist must be prepared to address the common nutritional concerns that arise in both advanced cancer and survivorship settings. While BMI, weight loss, and serum albumin are commonly used as surrogates of malnutrition, the use of a comprehensive screening tool may promote early identification of disrupted eating patterns and allow for prompt intervention. New digital technologies have also demonstrated promise to improve nutritional assessment capabilities. Use of conventional nutritional support in conjunction with novel nutraceutical and anti-cachexia approaches may enhance the effectiveness of interventions and improve our ability to reverse malnutrition-associated alterations in body composition. Future geriatric-focused nutrition research will be crucial in helping guide our patients and effectively addressing their dietary and lifestyle concerns.

Improving Fermi Orbit Determination and Prediction in an Uncertain Atmospheric Drag Environment

NASA Technical Reports Server (NTRS)

Vavrina, Matthew A.; Newman, Clark P.; Slojkowski, Steven E.; Carpenter, J. Russell

2014-01-01

Orbit determination and prediction of the Fermi Gamma-ray Space Telescope trajectory is strongly impacted by the unpredictability and variability of atmospheric density and the spacecraft's ballistic coefficient. Operationally, Global Positioning System point solutions are processed with an extended Kalman filter for orbit determination, and predictions are generated for conjunction assessment with secondary objects. When these predictions are compared to Joint Space Operations Center radar-based solutions, the close approach distance between the two predictions can greatly differ ahead of the conjunction. This work explores strategies for improving prediction accuracy and helps to explain the prediction disparities. Namely, a tuning analysis is performed to determine atmospheric drag modeling and filter parameters that can improve orbit determination as well as prediction accuracy. A 45% improvement in three-day prediction accuracy is realized by tuning the ballistic coefficient and atmospheric density stochastic models, measurement frequency, and other modeling and filter parameters.

Optimized path planning for soft tissue resection via laser vaporization

NASA Astrophysics Data System (ADS)

Ross, Weston; Cornwell, Neil; Tucker, Matthew; Mann, Brian; Codd, Patrick

2018-02-01

Robotic and robotic-assisted surgeries are becoming more prevalent with the promise of improving surgical outcomes through increased precision, reduced operating times, and minimally invasive procedures. The handheld laser scalpel in neurosurgery has been shown to provide a more gentle approach to tissue manipulation on or near critical structures over classical tooling, though difficulties of control have prevented large scale adoption of the tool. This paper presents a novel approach to generating a cutting path for the volumetric resection of tissue using a computer-guided laser scalpel. A soft tissue ablation simulator is developed and used in conjunction with an optimization routine to select parameters which maximize the total resection of target tissue while minimizing the damage to surrounding tissue. The simulator predicts the ablative properties of tissue from an interrogation cut for tuning and simulates the removal of a tumorous tissue embedded on the surface of healthy tissue using a laser scalpel. We demonstrate the ability to control depth and smoothness of cut using genetic algorithms to optimize the ablation parameters and cutting path. The laser power level, cutting rate and spacing between cuts are optimized over multiple surface cuts to achieve the desired resection volumes.

Public Health Surveillance via Template Management in Electronic Health Records: Tri-Service Workflow's Rapid Response to an Infectious Disease Crisis.

PubMed

Berkley, Holly; Barnes, Matthew; Carnahan, David; Hayhurst, Janet; Bockhorst, Archie; Neville, James

2017-03-01

To describe the use of template-based screening for risk of infectious disease exposure of patients presenting to primary care medical facilities during the 2014 West African Ebola virus outbreak. The Military Health System implemented an Ebola risk-screening tool in primary care settings in order to create early notifications and early responses to potentially infected persons. Three time-sensitive, evidence-based screening questions were developed and posted to Tri-Service Workflow (TSWF) AHLTA templates in conjunction with appropriate training. Data were collected in January 2015, to assess the adoption of the TSWF-based Ebola risk-screening tool. Among encounters documented using TSWF templates, 41% of all encounters showed use of the TSWF-based Ebola risk-screening questions by the fourth day. The screening rate increased over the next 3 weeks, and reached a plateau at approximately 50%. This report demonstrates the MHS capability to deploy a standardized, globally applicable decision support aid that could be seen the same day by all primary care clinics across the military health direct care system, potentially improving rapid compliance with screening directives. Reprint & Copyright © 2017 Association of Military Surgeons of the U.S.

The Physiology of Protein S-acylation

PubMed Central

Chamberlain, Luke H.; Shipston, Michael J.

2015-01-01

Protein S-acylation, the only fully reversible posttranslational lipid modification of proteins, is emerging as a ubiquitous mechanism to control the properties and function of a diverse array of proteins and consequently physiological processes. S-acylation results from the enzymatic addition of long-chain lipids, most typically palmitate, onto intracellular cysteine residues of soluble and transmembrane proteins via a labile thioester linkage. Addition of lipid results in increases in protein hydrophobicity that can impact on protein structure, assembly, maturation, trafficking, and function. The recent explosion in global S-acylation (palmitoyl) proteomic profiling as a result of improved biochemical tools to assay S-acylation, in conjunction with the recent identification of enzymes that control protein S-acylation and de-acylation, has opened a new vista into the physiological function of S-acylation. This review introduces key features of S-acylation and tools to interrogate this process, and highlights the eclectic array of proteins regulated including membrane receptors, ion channels and transporters, enzymes and kinases, signaling adapters and chaperones, cell adhesion, and structural proteins. We highlight recent findings correlating disruption of S-acylation to pathophysiology and disease and discuss some of the major challenges and opportunities in this rapidly expanding field. PMID:25834228

Secure Large-Scale Airport Simulations Using Distributed Computational Resources

NASA Technical Reports Server (NTRS)

McDermott, William J.; Maluf, David A.; Gawdiak, Yuri; Tran, Peter; Clancy, Dan (Technical Monitor)

2001-01-01

To fully conduct research that will support the far-term concepts, technologies and methods required to improve the safety of Air Transportation a simulation environment of the requisite degree of fidelity must first be in place. The Virtual National Airspace Simulation (VNAS) will provide the underlying infrastructure necessary for such a simulation system. Aerospace-specific knowledge management services such as intelligent data-integration middleware will support the management of information associated with this complex and critically important operational environment. This simulation environment, in conjunction with a distributed network of supercomputers, and high-speed network connections to aircraft, and to Federal Aviation Administration (FAA), airline and other data-sources will provide the capability to continuously monitor and measure operational performance against expected performance. The VNAS will also provide the tools to use this performance baseline to obtain a perspective of what is happening today and of the potential impact of proposed changes before they are introduced into the system.

Maximizing Efficiency and Reducing Robotic Surgery Costs Using the NASA Task Load Index.

PubMed

Walters, Carrie; Webb, Paula J

2017-10-01

Perioperative leaders at our facility were struggling to meet efficiency targets for robotic surgery procedures while also maintaining the satisfaction of the surgical team. We developed a human resources time and motion study tool and used it in conjunction with the NASA Task Load Index to observe and analyze the required workload of personnel assigned to 25 robotic surgery procedures. The time and motion study identified opportunities to enlist the help of nonlicensed support personnel to ensure safe patient care and improve OR efficiency. Using the NASA Task Load Index demonstrated that high temporal, effort, and physical demands existed for personnel assisting with and performing robotic surgery. We believe that this process could be used to develop cost-effective staffing models, resulting in safe and efficient care for all surgical patients. Copyright © 2017 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Online Analysis of Wind and Solar Part II: Transmission Tool

DOE Office of Scientific and Technical Information (OSTI.GOV)

Makarov, Yuri V.; Etingov, Pavel V.; Ma, Jian

2012-01-31

To facilitate wider penetration of renewable resources without compromising system reliability concerns arising from the lack of predictability of intermittent renewable resources, a tool for use by California Independent System Operator (CAISO) power grid operators was developed by Pacific Northwest National Laboratory (PNNL) in conjunction with CAISO with funding from California Energy Commission. The tool analyzes and displays the impacts of uncertainties in forecasts of loads and renewable generation on: (1) congestion, (2)voltage and transient stability margins, and (3)voltage reductions and reactive power margins. The impacts are analyzed in the base case and under user-specified contingencies.A prototype of the toolmore » has been developed and implemented in software.« less

Learning from connectomics on the fly.

PubMed

Schlegel, Philipp; Costa, Marta; Jefferis, Gregory Sxe

2017-12-01

Parallels between invertebrates and vertebrates in nervous system development, organisation and circuits are powerful reasons to use insects to study the mechanistic basis of behaviour. The last few years have seen the generation in Drosophila melanogaster of very large light microscopy data sets, genetic driver lines and tools to report or manipulate neural activity. These resources in conjunction with computational tools are enabling large scale characterisation of neuronal types and their functional properties. These are complemented by 3D electron microscopy, providing synaptic resolution data. A whole brain connectome of the fly larva is approaching completion based on manual reconstruction of electron-microscopy data. An adult whole brain dataset is already publicly available and focussed reconstruction is under way, but its 40× greater volume would require ∼500-5000 person-years of manual labour. Nevertheless rapid technical improvements in imaging and especially automated segmentation will likely deliver a complete adult connectome in the next 5 years. To enhance our understanding of the circuit basis of behaviour, light and electron microscopy outputs must be integrated with functional and physiological information into comprehensive databases. We review presently available data, tools and opportunities in Drosophila. We then consider the limits and potential of future progress and how this may impact neuroscience in rich model systems provided by larger insects and vertebrates. Copyright © 2017 Elsevier Inc. All rights reserved.

Towards the integration, annotation and association of historical microarray experiments with RNA-seq.

PubMed

Chavan, Shweta S; Bauer, Michael A; Peterson, Erich A; Heuck, Christoph J; Johann, Donald J

2013-01-01

Transcriptome analysis by microarrays has produced important advances in biomedicine. For instance in multiple myeloma (MM), microarray approaches led to the development of an effective disease subtyping via cluster assignment, and a 70 gene risk score. Both enabled an improved molecular understanding of MM, and have provided prognostic information for the purposes of clinical management. Many researchers are now transitioning to Next Generation Sequencing (NGS) approaches and RNA-seq in particular, due to its discovery-based nature, improved sensitivity, and dynamic range. Additionally, RNA-seq allows for the analysis of gene isoforms, splice variants, and novel gene fusions. Given the voluminous amounts of historical microarray data, there is now a need to associate and integrate microarray and RNA-seq data via advanced bioinformatic approaches. Custom software was developed following a model-view-controller (MVC) approach to integrate Affymetrix probe set-IDs, and gene annotation information from a variety of sources. The tool/approach employs an assortment of strategies to integrate, cross reference, and associate microarray and RNA-seq datasets. Output from a variety of transcriptome reconstruction and quantitation tools (e.g., Cufflinks) can be directly integrated, and/or associated with Affymetrix probe set data, as well as necessary gene identifiers and/or symbols from a diversity of sources. Strategies are employed to maximize the annotation and cross referencing process. Custom gene sets (e.g., MM 70 risk score (GEP-70)) can be specified, and the tool can be directly assimilated into an RNA-seq pipeline. A novel bioinformatic approach to aid in the facilitation of both annotation and association of historic microarray data, in conjunction with richer RNA-seq data, is now assisting with the study of MM cancer biology.

Ocean circulation studies

NASA Technical Reports Server (NTRS)

Koblinsky, C. J.

1984-01-01

Remotely sensed signatures of ocean surface characteristics from active and passive satellite-borne radiometers in conjunction with in situ data were utilized to examine the large scale, low frequency circulation of the world's oceans. Studies of the California Current, the Gulf of California, and the Kuroshio Extension Current in the western North Pacific were reviewed briefly. The importance of satellite oceanographic tools was emphasized.

KPI Employer Executive Summary Report, Summer 2000-Winter 2001.

ERIC Educational Resources Information Center

Sheridan Coll. (Ontario).

In the mid 1990s, the Ontario Government decided to enhance the accountability of the Colleges of Applied Arts and Technology by measuring and rewarding their performance in meeting specific goals and outcomes. The KPI Satisfaction Survey is a tool developed by the Ministry of Training Colleges and Universities in conjunction with the colleges to…

Health Information Retrieval Tool (HIRT)

PubMed Central

Nyun, Mra Thinzar; Ogunyemi, Omolola; Zeng, Qing

2002-01-01

The World Wide Web (WWW) is a powerful way to deliver on-line health information, but one major problem limits its value to consumers: content is highly distributed, while relevant and high quality information is often difficult to find. To address this issue, we experimented with an approach that utilizes three-dimensional anatomic models in conjunction with free-text search.

Free or Open Access to Scholarly Documentation: Google Scholar or Academic Libraries

ERIC Educational Resources Information Center

Burns, C. Sean

2013-01-01

Soon after the university movement started in the late 1800s, academic libraries became the dominant providers of the tools and services required to locate and access scholarly information. However, with the advent of alternate discovery services, such as Google Scholar, in conjunction with open access scholarly content, researchers now have the…

Impact of Animal Assisted Therapy Reading Instruction on Reading Performance of Homeschooled Students

ERIC Educational Resources Information Center

Smith, Kelly A.

2010-01-01

While animal assisted therapy (AAT) has been a successful part of treatment plans within the medical field for several decades, AAT has not been quantitatively researched as a viable instructional tool that can be used in conjunction with other reading intervention strategies. With over one-third of elementary school aged children experiencing…

Visual search deficits in amblyopia.

PubMed

Tsirlin, Inna; Colpa, Linda; Goltz, Herbert C; Wong, Agnes M F

2018-04-01

Amblyopia is a neurodevelopmental disorder defined as a reduction in visual acuity that cannot be corrected by optical means. It has been associated with low-level deficits. However, research has demonstrated a link between amblyopia and visual attention deficits in counting, tracking, and identifying objects. Visual search is a useful tool for assessing visual attention but has not been well studied in amblyopia. Here, we assessed the extent of visual search deficits in amblyopia using feature and conjunction search tasks. We compared the performance of participants with amblyopia (n = 10) to those of controls (n = 12) on both feature and conjunction search tasks using Gabor patch stimuli, varying spatial bandwidth and orientation. To account for the low-level deficits inherent in amblyopia, we measured individual contrast and crowding thresholds and monitored eye movements. The display elements were then presented at suprathreshold levels to ensure that visibility was equalized across groups. There was no performance difference between groups on feature search, indicating that our experimental design controlled successfully for low-level amblyopia deficits. In contrast, during conjunction search, median reaction times and reaction time slopes were significantly larger in participants with amblyopia compared with controls. Amblyopia differentially affects performance on conjunction visual search, a more difficult task that requires feature binding and possibly the involvement of higher-level attention processes. Deficits in visual search may affect day-to-day functioning in people with amblyopia.

Crash Data Improvement Program : An RSPCB Peer Exchange

DOT National Transportation Integrated Search

2011-08-04

This report provides a summary of the Crash Data Improvement Program (CDIP) peer exchange sponsored by the Federal Highway Administrations (FHWA) Office of Safety on August 4, 2011. The peer exchange was hosted in conjunction with the annual Traff...

Topical ocular treatment with monoclonal antibody Fab fragments targeting Japanese cedar pollen Cry j 1 inhibits Japanese cedar pollen-induced allergic conjunctivitis in mice.

PubMed

Mizutani, Nobuaki; Nabe, Takeshi; Yoshino, Shin

2017-03-05

Fab fragments (Fabs) of antibodies having the ability only to bind to specific allergens lack effector functions due to the absence of the Fc portion. In the present study, we examined whether IgG1 monoclonal antibody (mAb) Fabs targeting Japanese cedar pollen (JCP) Cry j 1 were able to regulate JCP-induced allergic conjunctivitis in mice. BALB/c mice actively sensitized with JCP were repeatedly challenged by topical administration of JCP eye drops. Fabs prepared by the digestion of anti-JCP IgG1 mAbs (P1-3 and P1-8) with papain were applied to the eye 15min before the JCP challenges followed by measurement of the clinical conjunctivitis score. In the in vitro experiments, P1-3 and P1-8 showed specific binding to JCP Cry j 1. Furthermore, intact P1-3 binding to Cry j 1 was inhibited by P1-3 Fabs, but not P1-8 Fabs; additionally, P1-8 Fabs, but not P1-3 Fabs, suppressed the intact P1-8 binding, suggesting that the epitopes of Cry j 1 recognized by P1-3 and P1-8 were different. Topical ocular treatment with P1-3 Fabs or P1-8 Fabs was followed by marked suppression of JCP-induced conjunctivitis (P<0.01). In histological evaluation, P1-8 Fabs showed a reduction in eosinophil infiltration in the conjunctiva (P<0.01). These results demonstrated that topical ocular treatment with IgG1 mAb Fabs to Cry j 1 was effective in suppressing JCP-induced allergic conjunctivitis in mice. Furthermore, it suggests the possibility that some epitopes recognized by Fabs could be used as a tool to regulate allergic conjunctivitis. Copyright © 2017 Elsevier B.V. All rights reserved.

Guided Search for Triple Conjunctions

PubMed Central

Nordfang, Maria; Wolfe, Jeremy M

2017-01-01

A key tenet of Feature Integration Theory and related theories such as Guided Search (GS) is that the binding of basic features requires attention. This would seem to predict that conjunctions of features of objects that have not been attended should not influence search. However, Found (1998) reported that an irrelevant feature (size) improved the efficiency of search for a color × orientation conjunction if it was correlated with the other two features across the display compared to the case where size was not correlated with color and orientation features. We examine this issue with somewhat different stimuli. We use triple conjunctions of color, orientation and shape (e.g. search for a red, vertical, oval-shaped item). This allows us to manipulate the number of features that each distractor shares with the target (Sharing) and it allows us to vary the total number of distractor types (and, thus, the number of groups of identical items; Grouping). We find these triple conjunction searches are generally very efficient – producing very shallow reaction time (RT) × set size slopes, consistent with strong guidance by basic features. Nevertheless, both of these variables, Sharing and Grouping modulate performance. These influences are not predicted by previous accounts of GS. However, both can be accommodated in a GS framework. Alternatively, it is possible, if not necessary, to see these effects as evidence for “preattentive binding” of conjunctions. PMID:25005070

Guided search for triple conjunctions.

PubMed

Nordfang, Maria; Wolfe, Jeremy M

2014-08-01

A key tenet of feature integration theory and of related theories such as guided search (GS) is that the binding of basic features requires attention. This would seem to predict that conjunctions of features of objects that have not been attended should not influence search. However, Found (1998) reported that an irrelevant feature (size) improved the efficiency of search for a Color × Orientation conjunction if it was correlated with the other two features across the display, as compared to the case in which size was not correlated with color and orientation features. We examined this issue with somewhat different stimuli. We used triple conjunctions of color, orientation, and shape (e.g., search for a red, vertical, oval-shaped item). This allowed us to manipulate the number of features that each distractor shared with the target (sharing) and it allowed us to vary the total number of distractor types (and, thus, the number of groups of identical items: grouping). We found that these triple conjunction searches were generally very efficient--producing very shallow Reaction Time × Set Size slopes, consistent with strong guidance by basic features. Nevertheless, both of the variables, sharing and grouping, modulated performance. These influences were not predicted by previous accounts of GS; however, both can be accommodated in a GS framework. Alternatively, it is possible, though not necessary, to see these effects as evidence for "preattentive binding" of conjunctions.

New Tool Quantitatively Maps Minority-Carrier Lifetime of Multicrystalline Silicon Bricks (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2011-11-01

NREL's new imaging tool could provide manufacturers with insight on their processes. Scientists at the National Renewable Energy Laboratory (NREL) have used capabilities within the Process Development and Integration Laboratory (PDIL) to generate quantitative minority-carrier lifetime maps of multicrystalline silicon (mc-Si) bricks. This feat has been accomplished by using the PDIL's photoluminescence (PL) imaging system in conjunction with transient lifetime measurements obtained using a custom NREL-designed resonance-coupled photoconductive decay (RCPCD) system. PL imaging can obtain rapid high-resolution images that provide a qualitative assessment of the material lifetime-with the lifetime proportional to the pixel intensity. In contrast, the RCPCD technique providesmore » a fast quantitative measure of the lifetime with a lower resolution and penetrates millimeters into the mc-Si brick, providing information on bulk lifetimes and material quality. This technique contrasts with commercially available minority-carrier lifetime mapping systems that use microwave conductivity measurements. Such measurements are dominated by surface recombination and lack information on the material quality within the bulk of the brick. By combining these two complementary techniques, we obtain high-resolution lifetime maps at very fast data acquisition times-attributes necessary for a production-based diagnostic tool. These bulk lifetime measurements provide manufacturers with invaluable feedback on their silicon ingot casting processes. NREL has been applying the PL images of lifetime in mc-Si bricks in collaboration with a U.S. photovoltaic industry partner through Recovery Act Funded Project ARRA T24. NREL developed a new tool to quantitatively map minority-carrier lifetime of multicrystalline silicon bricks by using photoluminescence imaging in conjunction with resonance-coupled photoconductive decay measurements. Researchers are not hindered by surface recombination and can look deeper into the material to map bulk lifetimes. The tool is being applied to silicon bricks in a project collaborating with a U.S. photovoltaic industry partner. Photovoltaic manufacturers can use the NREL tool to obtain valuable feedback on their silicon ingot casting processes.« less

Using activity-based monitoring systems to detect dairy cows in oestrus: a field evaluation.

PubMed

Dela Rue, B T; Kamphuis, C; Burke, C R; Jago, J G

2014-03-01

To assess the use and performance of activity-based oestrus detection systems (ODS) on two commercial dairy farms using a gold standard based on profiles of concentrations of progesterone in milk, artificial insemination (AI) records and pregnancy diagnosis results. Two activity-based ODS were evaluated in mature cows on two large pasture-grazed dairy farms (>500 cows) over the first 3 weeks of AI. Farm 1 (n=286 cows) used a leg-mounted device and cows were drafted automatically based on activity alerts. Decisions regarding AI were then made based on tail-paint and cow history for these cows. Farm 2 (n=345 cows) used a collar-mounted device and activity alerts were used in conjunction with other information, before the farmer manually selected cows for AI. The gold standard to define the timing of oestrus was based on profiles of concentrations of progesterone in milk measured twice-weekly, used in conjunction with AI records and pregnancy diagnosis results. Sensitivity and positive predictive value (PPV) were calculated for the activity-based ODS data only, and then for AI decisions, against the gold standard. Farm 1 had 195 confirmed oestrus events and 209 activity alerts were generated. The sensitivity of the activity-based ODS was 89.2% with a PPV of 83.3%. Using tail-paint and cow history to confirm activity-based alerts 175 cows were inseminated, resulting in a sensitivity of 89.2% and an improved PPV of 99.4%. Farm 2 had 343 confirmed oestrus events, and 726 alerts were generated by the activity-based ODS, giving a sensitivity of 69.7% with a PPV of 32.9%. A total of 386 cows had AI records, giving a sensitivity of 81.3% and PPV of 72.3%. The two activity-based ODS were used differently on-farm; one automatically selecting cows and the other supporting the manual selection of cows in oestrus. Only one achieved a performance level suggested to be acceptable as a stand-alone ODS. Use of additional tools, such as observation of tail paint to confirm activity-based oestrus alerts before AI, substantially improved the PPV. A well performing activity-based ODS can be a valuable tool in identifying cows in oestrus prior to visual confirmation of oestrus status. However the performance of these ODS technologies varies considerably.

Evaluation of methods for predicting rail-highway crossing hazards.

DOT National Transportation Integrated Search

1986-01-01

The need for improvement at a rail/highway crossing typically is based on the Expected Accident Rate (EAR) in conjunction with other criteria carrying lesser weight. In recent years new models for assessing the need for improvements have been develop...

Aeroheating Design Issues for Reusable Launch Vehicles: A Perspective

NASA Technical Reports Server (NTRS)

Zoby, E. Vincent; Thompson, Richard A.; Wurster, Kathryn E.

2004-01-01

An overview of basic aeroheating design issues for Reusable Launch Vehicles (RLV), which addresses the application of hypersonic ground-based testing, and computational fluid dynamic (CFD) and engineering codes, is presented. Challenges inherent to the prediction of aeroheating environments required for the successful design of the RLV Thermal Protection System (TPS) are discussed in conjunction with the importance of employing appropriate experimental/computational tools. The impact of the information garnered by using these tools in the resulting analyses, ultimately enhancing the RLV TPS design is illustrated. A wide range of topics is presented in this overview; e.g. the impact of flow physics issues such as boundary-layer transition, including effects of distributed and discrete roughness, shock-shock interactions, and flow separation/reattachment. Also, the benefit of integrating experimental and computational studies to gain an improved understanding of flow phenomena is illustrated. From computational studies, the effect of low-density conditions and of uncertainties in material surface properties on the computed heating rates a r e highlighted as well as the significant role of CFD in improving the Outer Mold Line (OML) definition to reduce aeroheating while maintaining aerodynamic performance. Appropriate selection of the TPS design trajectories and trajectory shaping to mitigate aeroheating levels and loads are discussed. Lastly, an illustration of an aeroheating design process is presented whereby data from hypersonic wind-tunnel tests are integrated with predictions from CFD codes and engineering methods to provide heating environments along an entry trajectory as required for TPS design.

Aeroheating Design Issues for Reusable Launch Vehicles: A Perspective

NASA Technical Reports Server (NTRS)

Zoby, E. Vincent; Thompson, Richard A.; Wurster, Kathryn E.

2004-01-01

An overview of basic aeroheating design issues for Reusable Launch Vehicles (RLV), which addresses the application of hypersonic ground-based testing, and computational fluid dynamic (CFD) and engineering codes, is presented. Challenges inherent to the prediction of aeroheating environments required for the successful design of the RLV Thermal Protection System (TPS) are discussed in conjunction with the importance of employing appropriate experimental/computational tools. The impact of the information garnered by using these tools in the resulting analyses, ultimately enhancing the RLV TPS design is illustrated. A wide range of topics is presented in this overview; e.g. the impact of flow physics issues such as boundary-layer transition, including effects of distributed and discrete roughness, shockshock interactions, and flow separation/reattachment. Also, the benefit of integrating experimental and computational studies to gain an improved understanding of flow phenomena is illustrated. From computational studies, the effect of low-density conditions and of uncertainties in material surface properties on the computed heating rates are highlighted as well as the significant role of CFD in improving the Outer Mold Line (OML) definition to reduce aeroheating while maintaining aerodynamic performance. Appropriate selection of the TPS design trajectories and trajectory shaping to mitigate aeroheating levels and loads are discussed. Lastly, an illustration of an aeroheating design process is presented whereby data from hypersonic wind-tunnel tests are integrated with predictions from CFD codes and engineering methods to provide heating environments along an entry trajectory as required for TPS design.

High-Performance Integrated Virtual Environment (HIVE) Tools and Applications for Big Data Analysis.

PubMed

Simonyan, Vahan; Mazumder, Raja

2014-09-30

The High-performance Integrated Virtual Environment (HIVE) is a high-throughput cloud-based infrastructure developed for the storage and analysis of genomic and associated biological data. HIVE consists of a web-accessible interface for authorized users to deposit, retrieve, share, annotate, compute and visualize Next-generation Sequencing (NGS) data in a scalable and highly efficient fashion. The platform contains a distributed storage library and a distributed computational powerhouse linked seamlessly. Resources available through the interface include algorithms, tools and applications developed exclusively for the HIVE platform, as well as commonly used external tools adapted to operate within the parallel architecture of the system. HIVE is composed of a flexible infrastructure, which allows for simple implementation of new algorithms and tools. Currently, available HIVE tools include sequence alignment and nucleotide variation profiling tools, metagenomic analyzers, phylogenetic tree-building tools using NGS data, clone discovery algorithms, and recombination analysis algorithms. In addition to tools, HIVE also provides knowledgebases that can be used in conjunction with the tools for NGS sequence and metadata analysis.

High-Performance Integrated Virtual Environment (HIVE) Tools and Applications for Big Data Analysis

PubMed Central

Simonyan, Vahan; Mazumder, Raja

2014-01-01

The High-performance Integrated Virtual Environment (HIVE) is a high-throughput cloud-based infrastructure developed for the storage and analysis of genomic and associated biological data. HIVE consists of a web-accessible interface for authorized users to deposit, retrieve, share, annotate, compute and visualize Next-generation Sequencing (NGS) data in a scalable and highly efficient fashion. The platform contains a distributed storage library and a distributed computational powerhouse linked seamlessly. Resources available through the interface include algorithms, tools and applications developed exclusively for the HIVE platform, as well as commonly used external tools adapted to operate within the parallel architecture of the system. HIVE is composed of a flexible infrastructure, which allows for simple implementation of new algorithms and tools. Currently, available HIVE tools include sequence alignment and nucleotide variation profiling tools, metagenomic analyzers, phylogenetic tree-building tools using NGS data, clone discovery algorithms, and recombination analysis algorithms. In addition to tools, HIVE also provides knowledgebases that can be used in conjunction with the tools for NGS sequence and metadata analysis. PMID:25271953

Differentiation of Streptococcus pneumoniae Conjunctivitis Outbreak Isolates by Matrix-Assisted Laser Desorption Ionization-Time of Flight Mass Spectrometry▿

PubMed Central

Williamson, Yulanda M.; Moura, Hercules; Woolfitt, Adrian R.; Pirkle, James L.; Barr, John R.; Carvalho, Maria Da Gloria; Ades, Edwin P.; Carlone, George M.; Sampson, Jacquelyn S.

2008-01-01

Streptococcus pneumoniae (pneumococcus [Pnc]) is a causative agent of many infectious diseases, including pneumonia, septicemia, otitis media, and conjunctivitis. There have been documented conjunctivitis outbreaks in which nontypeable (NT), nonencapsulated Pnc has been identified as the etiological agent. The use of mass spectrometry to comparatively and differentially analyze protein and peptide profiles of whole-cell microorganisms remains somewhat uncharted. In this report, we discuss a comparative proteomic analysis between NT S. pneumoniae conjunctivitis outbreak strains (cPnc) and other known typeable or NT pneumococcal and streptococcal isolates (including Pnc TIGR4 and R6, Streptococcus oralis, Streptococcus mitis, Streptococcus pseudopneumoniae, and Streptococcus pyogenes) and nonstreptococcal isolates (including Escherichia coli, Enterococcus faecalis, and Staphylococcus aureus) as controls. cPnc cells and controls were grown to mid-log phase, harvested, and subsequently treated with a 10% trifluoroacetic acid-sinapinic acid matrix mixture. Protein and peptide fragments of the whole-cell bacterial isolate-matrix combinations ranging in size from 2 to 14 kDa were evaluated by matrix-assisted laser desorption ionization-time of flight mass spectrometry. Additionally Random Forest analytical tools and dendrogramic representations (Genesis) suggested similarities and clustered the isolates into distinct clonal groups, respectively. Also, a peak list of protein and peptide masses was obtained and compared to a known Pnc protein mass library, in which a peptide common and unique to cPnc isolates was tentatively identified. Information gained from this study will lead to the identification and validation of proteins that are commonly and exclusively expressed in cPnc strains which could potentially be used as a biomarker in the rapid diagnosis of pneumococcal conjunctivitis. PMID:18708515

Application of Climate Assessment Tool (CAT) to estimate climate variability impacts on nutrient loading from local watersheds

Treesearch

Ying Ouyang; Prem B. Parajuli; Gary Feng; Theodor D. Leininger; Yongshan Wan; Padmanava Dash

2018-01-01

A vast amount of future climate scenario datasets, created by climate models such as general circulation models (GCMs), have been used in conjunction with watershed models to project future climate variability impact on hydrological processes and water quality. However, these low spatial-temporal resolution datasets are often difficult to downscale spatially and...

The PC9A Filter Screening Tool

DTIC Science & Technology

2016-02-01

conjunction with an optical microscope for identification of other important debris such as glass beads. The FST has now been installed at RAAF East...conservative screening limits need to be sent for detailed laboratory analysis. Laboratory analysis has traditionally involved a manual microscopic ...Electron Microscope with Energy Dispersive Spectroscopy (SEM EDS) to determine the composition and likely source. The Engine Maintenance Manual

Insight into Hydrazinium Nitrates, Azides, Dicyanamide, and 5-Azidotetrazolate Ionic Materials from Simulations and Experiments

DTIC Science & Technology

2011-04-04

agreement between simulation and experiment is seen for UDMH , with simulations up to slightly above the boiling point of 336 K falling within a density ...conjunction wi th M05-2X density funct ional. Inclusion of a l one-pair on hydrazinium-based cations significantly improved ion electrostatic description...cation-anion complexes employing aug-cc- pvDz (cc-pvTz) basis functions at MP2 level or in conjunction with M05-2X density functional. Inclusion of

Hibernation-Based Therapy to Improve Survival of Severe Blood Loss

DTIC Science & Technology

2013-10-01

NOTES 14. ABSTRACT The purpose of these experiments was to find the most effective concentration of melatonin /DMSO that could be administered in...conjunction with 4M BHB. Three concentrations were tested, 43mM Melatonin /20% DMSO, 4.3mM Melatonin /2% DMSO and 0.43mM Melatonin /2% DMSO. It was...found that 43mM Melatonin /20% DMSO given in conjunction with 4M BHB was the most effective concentration. This concentration, 43mM Melatonin /20% DMSO

The Effect of Parental Metoclopramide, in Conjunction with a General Anesthetic, on the Incidence of Postoperative Nausea, Retching and Vomiting in an Ambulatory Surgical Setting.

DTIC Science & Technology

1983-08-01

control group was not given metoclopramide in conjunction with their general anesthetic. In the experimental group, five patients received metoclopramide...dreaded because of its association with the experience of nausea and vomiting. Furthermore, the individual often attributed these symptoms to the...anesthetic experience itself. Bonica (1958:532) stated that "despite improvements in anesthetic experience and agents, the almost h a n a e s h t i n .4

Using Micro-Synchrophasor Data for Advanced Distribution Grid Planning and Operations Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stewart, Emma; Kiliccote, Sila; McParland, Charles

2014-07-01

This report reviews the potential for distribution-grid phase-angle data that will be available from new micro-synchrophasors (µPMUs) to be utilized in existing distribution-grid planning and operations analysis. This data could augment the current diagnostic capabilities of grid analysis software, used in both planning and operations for applications such as fault location, and provide data for more accurate modeling of the distribution system. µPMUs are new distribution-grid sensors that will advance measurement and diagnostic capabilities and provide improved visibility of the distribution grid, enabling analysis of the grid’s increasingly complex loads that include features such as large volumes of distributed generation.more » Large volumes of DG leads to concerns on continued reliable operation of the grid, due to changing power flow characteristics and active generation, with its own protection and control capabilities. Using µPMU data on change in voltage phase angle between two points in conjunction with new and existing distribution-grid planning and operational tools is expected to enable model validation, state estimation, fault location, and renewable resource/load characterization. Our findings include: data measurement is outstripping the processing capabilities of planning and operational tools; not every tool can visualize a voltage phase-angle measurement to the degree of accuracy measured by advanced sensors, and the degree of accuracy in measurement required for the distribution grid is not defined; solving methods cannot handle the high volumes of data generated by modern sensors, so new models and solving methods (such as graph trace analysis) are needed; standardization of sensor-data communications platforms in planning and applications tools would allow integration of different vendors’ sensors and advanced measurement devices. In addition, data from advanced sources such as µPMUs could be used to validate models to improve/ensure accuracy, providing information on normally estimated values such as underground conductor impedance, and characterization of complex loads. Although the input of high-fidelity data to existing tools will be challenging, µPMU data on phase angle (as well as other data from advanced sensors) will be useful for basic operational decisions that are based on a trend of changing data.« less

Is the digitization of laparoscopic movement using accessible alternative technologies possible?

PubMed

Lorias Espinoza, Daniel; Gutiérrez Gnecchi, José Antonio; Martínez, Arturo Minor

2012-05-01

It is widely documented that laparoscopic surgeons require training, and an objective evaluation of the training that they receive. The most advanced evaluation systems integrate the digitization of the movement of laparoscopic tools. A great number of these systems, however, do not permit the use of real tools and their high cost limits their academic impact. Likewise, it is documented that new and accessible systems need to be developed. The aim of this article is to explore the possibility of digitizing the movement of laparoscopic tools in a three-dimensional workspace, using accessible alternative technology. Our proposal uses a commercial Wii video game control in conjunction with a program for determining kinematic variables during the execution of a recognition task.

Downhole vacuum cleans up tough fishing, milling jobs

DOE Office of Scientific and Technical Information (OSTI.GOV)

LaLande, P.; Flanders, B.

1996-02-01

A unique tool developed to effect reverse circulation downhole is being used successfully in problem milling and fishing operations where conventional techniques fail to recover junk in the hole. Jointly developed by several major operators in conjunction with Baker Oil Tools, the patented Reverse Circulating Tool (RCT) acts as a downhole vacuum cleaner, catching and retaining debris circulated from the wellbore while allowing fishing, milling and washover operations to continue uninterrupted. As described in several case histories overviewed, the unique vacuuming action efficiently cleans up junk and debris in even the most difficult fishing and milling applications. Downhole operations proceedmore » normally, but without threat of damage from milled debris. Developers hold both mechanical and method patents on the RCT.« less

Lessons learned in deploying software estimation technology and tools

NASA Technical Reports Server (NTRS)

Panlilio-Yap, Nikki; Ho, Danny

1994-01-01

Developing a software product involves estimating various project parameters. This is typically done in the planning stages of the project when there is much uncertainty and very little information. Coming up with accurate estimates of effort, cost, schedule, and reliability is a critical problem faced by all software project managers. The use of estimation models and commercially available tools in conjunction with the best bottom-up estimates of software-development experts enhances the ability of a product development group to derive reasonable estimates of important project parameters. This paper describes the experience of the IBM Software Solutions (SWS) Toronto Laboratory in selecting software estimation models and tools and deploying their use to the laboratory's product development groups. It introduces the SLIM and COSTAR products, the software estimation tools selected for deployment to the product areas, and discusses the rationale for their selection. The paper also describes the mechanisms used for technology injection and tool deployment, and concludes with a discussion of important lessons learned in the technology and tool insertion process.

Image processing and machine learning for fully automated probabilistic evaluation of medical images.

PubMed

Sajn, Luka; Kukar, Matjaž

2011-12-01

The paper presents results of our long-term study on using image processing and data mining methods in a medical imaging. Since evaluation of modern medical images is becoming increasingly complex, advanced analytical and decision support tools are involved in integration of partial diagnostic results. Such partial results, frequently obtained from tests with substantial imperfections, are integrated into ultimate diagnostic conclusion about the probability of disease for a given patient. We study various topics such as improving the predictive power of clinical tests by utilizing pre-test and post-test probabilities, texture representation, multi-resolution feature extraction, feature construction and data mining algorithms that significantly outperform medical practice. Our long-term study reveals three significant milestones. The first improvement was achieved by significantly increasing post-test diagnostic probabilities with respect to expert physicians. The second, even more significant improvement utilizes multi-resolution image parametrization. Machine learning methods in conjunction with the feature subset selection on these parameters significantly improve diagnostic performance. However, further feature construction with the principle component analysis on these features elevates results to an even higher accuracy level that represents the third milestone. With the proposed approach clinical results are significantly improved throughout the study. The most significant result of our study is improvement in the diagnostic power of the whole diagnostic process. Our compound approach aids, but does not replace, the physician's judgment and may assist in decisions on cost effectiveness of tests. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Accurate falls risk assessment and interventions for preventing falls in patients in the acute care setting within a private hospital in a large capital city: a best practice implementation project.

PubMed

Szymaniak, Samara

2015-09-01

Patient falls are a leading cause of adverse events in Australian hospitals. Most Australian hospitals have fall prevention policies, procedures and programs for preventing inpatient falls; however despite these resources many preventable falls continue to occur in Australian hospitals.It is imperative that clinicians understand the potential impact of inpatient falls, and what triggers can be identified and managed by a multifactorial team approach. Patients admitted to hospital often experience changes in physical and/or cognitive function which is then exacerbated by an unfamiliar environment and medical interventions. Adverse outcomes post falling can range from minor injuries such as skin tears to significant injuries such as intracranial hemorrhages and fractures which can ultimately result in permanent disability or death.In 2007, Calvary Wakefield Hospital implemented a Falls Minimization Program requiring routine assessment of all patients admitted using an Admission Risk Screening Tool in conjunction with completion of a detailed Falls Risk Assessment Tool when indicated. The aim of this implementation was to review current nursing practice against compliance with the Falls Minimization Program and also identify areas for improvement with a focus on preventative strategies. It was essential that the project and its outcomes also complement the National Safety and Quality Health Service Standards (standard 10 - Preventing Falls and Harm from Falls) that provide a benchmark for Calvary Wakefield Hospital. This was achieved by completing a baseline audit, implementing a corrective action plan post audit and then re-auditing in three months once strategies had been implemented This project used the pre- and post-implementation audit strategy made up of eight criteria using the Joanna Briggs Institute Practical Application of Clinical Evidence System and Getting Research into Practice. The audit, review, implementation and re-audit sequence was the strategy used to improve clinical practice, and the project was conducted over a five-month period, with the addition of a third audit cycle six months post completion of the implementation phase.Results were generated using the JBI-PACES module and were scrutinized by the project lead in conjunction with members of the project team. Results were discussed with key clinicians throughout the duration of the project. Baseline audit results provided the foundation for generating change and this data was then compared with the first follow-up audit to identify improvements in compliance with criteria. Again this data was compared with audits from six months post implementation to identify sustainability of the project. The results from the baseline audit highlighted that there was significant opportunity for improvement in all criteria audited. It was pleasing to report that in the first follow-up audit cycle, nearly all criteria showed an improvement in both medical and surgical fields. The greatest areas of improvement pertained to healthcare professionals receiving formal education (improvement of 46%), and patient and family education improved by 43%. To measure sustainability, a second follow-up audit was conducted using the same criteria and identified that strategies implemented had in fact been maintained, and the results were consistent with those from the first follow-up audit. The project used the pre- and post-audit strategy to translate evidence into practice, and not only demonstrated that implementation of evidence-based practice is possible in the acute setting but also showed improvement in the prevention of falls and harm from falls in that setting.

Developing eLearning for pressure ulcer prevention and management.

PubMed

Cameron, Rosie; Rodgers, Angela; Welsh, Lynn; McGown, Katrina

2014-08-12

The impact of pressure ulcers is psychologically, physically and clinically challenging for both patients and NHS staff. NHS Greater Glasgow and Clyde (NHS GGC), in line with the Scottish Best Practice Statement for the Prevention and Management of Pressure Ulcers ( Quality Improvement Scotland, 2009 ), and the NHS Health Improvement Scotland (2011) Preventing Pressure Ulcers Change Package, launched an awareness campaign throughout the organisation in April 2012 and has more recently adopted a 'zero-tolerance' approach to pressure damage. The tissue viability service in NHS GGC recognised that in order to achieve this aim, education of front-line staff is essential. An educational framework for pressure ulcer prevention was developed for all levels of healthcare staff involved in the delivery of patient care. As a means to support the framework, an initiative to develop web-based eLearning modules has been taken forward. This has resulted in the creation of an accessible, cost-effective, stimulating, relevant, and evidence-based education programme designed around the educational needs of all healthcare staff. In conjunction with the organisation's 'top ten tools' for pressure ulcer prevention and management, the modular online education programme addresses the aims of quality improvement and zero tolerance by supporting the provision of safe and effective person-centered care.

Modified ensemble Kalman filter for nuclear accident atmospheric dispersion: prediction improved and source estimated.

PubMed

Zhang, X L; Su, G F; Yuan, H Y; Chen, J G; Huang, Q Y

2014-09-15

Atmospheric dispersion models play an important role in nuclear power plant accident management. A reliable estimation of radioactive material distribution in short range (about 50 km) is in urgent need for population sheltering and evacuation planning. However, the meteorological data and the source term which greatly influence the accuracy of the atmospheric dispersion models are usually poorly known at the early phase of the emergency. In this study, a modified ensemble Kalman filter data assimilation method in conjunction with a Lagrangian puff-model is proposed to simultaneously improve the model prediction and reconstruct the source terms for short range atmospheric dispersion using the off-site environmental monitoring data. Four main uncertainty parameters are considered: source release rate, plume rise height, wind speed and wind direction. Twin experiments show that the method effectively improves the predicted concentration distribution, and the temporal profiles of source release rate and plume rise height are also successfully reconstructed. Moreover, the time lag in the response of ensemble Kalman filter is shortened. The method proposed here can be a useful tool not only in the nuclear power plant accident emergency management but also in other similar situation where hazardous material is released into the atmosphere. Copyright © 2014 Elsevier B.V. All rights reserved.

Designing biochars for in situ remediation of metal contaminated mine spoils

EPA Science Inventory

Biochar in conjunction with other soil amendments can be used for in situ remediation of metal-contaminated mine spoils for improved site phytostabilization. For successful phytostabilization to occur, biochar must improve mine spoil health with respect to plant rooting plus upt...

Designing biochars for in situ remediation of metal contaminated mine spoils.

EPA Science Inventory

Biochar in conjunction with other soil amendments can be used for in situ remediation of metal-contaminated mine spoils for improved site phytostabilization. For successful phytostabilization to occur, biochar must improve mine spoil health with respect to plant rooting plus upt...

Hydroeconomic optimization of integrated water management and transfers under stochastic surface water supply

NASA Astrophysics Data System (ADS)

Zhu, Tingju; Marques, Guilherme Fernandes; Lund, Jay R.

2015-05-01

Efficient reallocation and conjunctive operation of existing water supplies is gaining importance as demands grow, competitions among users intensify, and new supplies become more costly. This paper analyzes the roles and benefits of conjunctive use of surface water and groundwater and market-based water transfers in an integrated regional water system where agricultural and urban water users coordinate supply and demand management based on supply reliability and economic values of water. Agricultural users optimize land and water use for annual and perennial crops to maximize farm income, while urban users choose short-term and long-term water conservation actions to maintain reliability and minimize costs. The temporal order of these decisions is represented in a two-stage optimization that maximizes the net expected benefits of crop production, urban conservation and water management including conjunctive use and water transfers. Long-term decisions are in the first stage and short-term decisions are in a second stage based on probabilities of water availability events. Analytical and numerical analyses are made. Results show that conjunctive use and water transfers can substantially stabilize farmer's income and reduce system costs by reducing expensive urban water conservation or construction. Water transfers can equalize marginal values of water across users, while conjunctive use minimizes water marginal value differences in time. Model results are useful for exploring the integration of different water demands and supplies through water transfers, conjunctive use, and conservation, providing valuable insights for improving system management.

Recombinase-Mediated Cassette Exchange Using Adenoviral Vectors.

PubMed

Kolb, Andreas F; Knowles, Christopher; Pultinevicius, Patrikas; Harbottle, Jennifer A; Petrie, Linda; Robinson, Claire; Sorrell, David A

2017-01-01

Site-specific recombinases are important tools for the modification of mammalian genomes. In conjunction with viral vectors, they can be utilized to mediate site-specific gene insertions in animals and in cell lines which are difficult to transfect. Here we describe a method for the generation and analysis of an adenovirus vector supporting a recombinase-mediated cassette exchange reaction and discuss the advantages and limitations of this approach.

Listening to your audience: developing an educational tool to assist with recreation planning on private lands

Treesearch

J. Daniel van Dijk; Gary T. Green; Craig A. Miller

2009-01-01

The Georgia Forestry Commission in conjunction with the U.S. Forest Service instituted the Forest Stewardship Program (FSP) in 1991. A growing component of the FSP is recreation, which is the component least understood by stewardship planners. A survey was developed to better understand the needs of planners with regard to developing forest recreation plans, and the...

SAT Scores, 2013-14: Wake County Public School System (WCPSS). Measuring Up. D&A Report No. 14.14

ERIC Educational Resources Information Center

Gilleland, Kevin; Muli, Juliana

2014-01-01

The SAT is a national college entrance examination offered by the College Board and consists of three parts: Mathematics, Critical Reading, and Writing. The top score for each part is 800, for a total possible score of 2400. Colleges use SAT scores, in conjunction with other tools, to measure students' potential for success at the postsecondary…

The relationship of organizational needs to leadership styles.

PubMed

Wroblewski, D

1981-12-01

Technologists bring to the radiology department individual needs which are incorporated into their work environment. These needs can be termed "satisfiers"; they can also be categorized. The ability to recognize individual or group needs gives a manager the opportunity to alter leadership style in conjunction with the situation. The ability to satisfy needs can be a beneficial tool towards group motivation for goal attainment.

Chimera Grid Tools

NASA Technical Reports Server (NTRS)

Chan, William M.; Rogers, Stuart E.; Nash, Steven M.; Buning, Pieter G.; Meakin, Robert

2005-01-01

Chimera Grid Tools (CGT) is a software package for performing computational fluid dynamics (CFD) analysis utilizing the Chimera-overset-grid method. For modeling flows with viscosity about geometrically complex bodies in relative motion, the Chimera-overset-grid method is among the most computationally cost-effective methods for obtaining accurate aerodynamic results. CGT contains a large collection of tools for generating overset grids, preparing inputs for computer programs that solve equations of flow on the grids, and post-processing of flow-solution data. The tools in CGT include grid editing tools, surface-grid-generation tools, volume-grid-generation tools, utility scripts, configuration scripts, and tools for post-processing (including generation of animated images of flows and calculating forces and moments exerted on affected bodies). One of the tools, denoted OVERGRID, is a graphical user interface (GUI) that serves to visualize the grids and flow solutions and provides central access to many other tools. The GUI facilitates the generation of grids for a new flow-field configuration. Scripts that follow the grid generation process can then be constructed to mostly automate grid generation for similar configurations. CGT is designed for use in conjunction with a computer-aided-design program that provides the geometry description of the bodies, and a flow-solver program.

Antimicrobial resistance and the standards of the World Organisation for Animal Health.

PubMed

Orand, J P

2012-04-01

Antimicrobial resistance and the use of antimicrobial agents in veterinary medicine are complex issues that are currently a source of major international concern. It is therefore essential for the World Organisation for Animal Health (OIE) to consider this issue, while at the same time continuing to address the problem of zoonotic diseases. That is why the OIE has included objectives for veterinary drugs, especially antimicrobials, in its Strategic Plan. The OIE plays an active part in discussions on this subject in conjunction with other international organisations working in this field, such as the Food and Agriculture Organization of the United Nations (FAO) and the World Health Organization (WHO). Furthermore, the OIE has adopted guidelines both for defining harmonised methodologies for antimicrobial resistance surveillance and monitoring and for helping countries to conduct a risk analysis tailored to their situation and to take appropriate management measures. The OIE has included this issue in its programme of assistance to countries by offering them structural enhancement tools: the Tool for the Evaluation of Performance of Veterinary Services (O1E PVS Tool), PVS Gap Analysis, veterinary legislation support, and training for veterinary national focal points, with the aid of its Collaborating Centres for veterinary medicinal products. Only by mobilising all countries to improve the quality of antimicrobials, to introduce antimicrobial resistance surveillance and to implement measures for the responsible and prudent use of antimicrobials, will it be possible to halt the spread of antimicrobial resistance.

STEMMING the Gap

ERIC Educational Resources Information Center

Kahler, Jim; Valentine, Nancy

2011-01-01

America has a gap when it comes to youth pursuing science and technology careers. In an effort to improve the knowledge and application of science, technology, engineering, and math (STEM), after-school programs can work in conjunction with formal in-school curriculum to improve science education. One organization that actively addresses this…

Estimated capacity of object files in visual short-term memory is not improved by retrieval cueing.

PubMed

Saiki, Jun; Miyatsuji, Hirofumi

2009-03-23

Visual short-term memory (VSTM) has been claimed to maintain three to five feature-bound object representations. Some results showing smaller capacity estimates for feature binding memory have been interpreted as the effects of interference in memory retrieval. However, change-detection tasks may not properly evaluate complex feature-bound representations such as triple conjunctions in VSTM. To understand the general type of feature-bound object representation, evaluation of triple conjunctions is critical. To test whether interference occurs in memory retrieval for complete object file representations in a VSTM task, we cued retrieval in novel paradigms that directly evaluate the memory for triple conjunctions, in comparison with a simple change-detection task. In our multiple object permanence tracking displays, observers monitored for a switch in feature combination between objects during an occlusion period, and we found that a retrieval cue provided no benefit with the triple conjunction tasks, but significant facilitation with the change-detection task, suggesting that low capacity estimates of object file memory in VSTM reflect a limit on maintenance, not retrieval.

A feature-weighting account of priming in conjunction search.

PubMed

Becker, Stefanie I; Horstmann, Gernot

2009-02-01

Previous research on the priming effect in conjunction search has shown that repeating the target and distractor features across displays speeds mean response times but does not improve search efficiency: Repetitions do not reduce the set size effect-that is, the effect of the number of distractor items-but only modulate the intercept of the search function. In the present study, we investigated whether priming modulates search efficiency when a conjunctively defined target randomly changes between red and green. The results from an eyetracking experiment show that repeating the target across trials reduced the set size effect and, thus, did enhance search efficiency. Moreover, the probability of selecting the target as the first item in the display was higher when the target-distractor displays were repeated across trials than when they changed. Finally, red distractors were selected more frequently than green distractors when the previous target had been red (and vice versa). Taken together, these results indicate that priming in conjunction search modulates processes concerned with guiding attention to the target, by assigning more attentional weight to features sharing the previous target's color.

PySCeSToolbox: a collection of metabolic pathway analysis tools.

PubMed

Christensen, Carl D; Hofmeyr, Jan-Hendrik S; Rohwer, Johann M

2018-01-01

PySCeSToolbox is an extension to the Python Simulator for Cellular Systems (PySCeS) that includes tools for performing generalized supply-demand analysis, symbolic metabolic control analysis, and a framework for investigating the kinetic and thermodynamic aspects of enzyme-catalyzed reactions. Each tool addresses a different aspect of metabolic behaviour, control, and regulation; the tools complement each other and can be used in conjunction to better understand higher level system behaviour. PySCeSToolbox is available on Linux, Mac OS X and Windows. It is licensed under the BSD 3-clause licence. Code, setup instructions and a link to documentation can be found at https://github.com/PySCeS/PyscesToolbox. jr@sun.ac.za. Supplementary data are available at Bioinformatics online. © The Author (2017). Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com

Data supporting the prediction of the properties of eutectic organic phase change materials.

PubMed

Kahwaji, Samer; White, Mary Anne

2018-04-01

The data presented in this article include the molar masses, melting temperatures, latent heats of fusion and temperature-dependent heat capacities of fifteen fatty acid phase change materials (PCMs). The data are used in conjunction with the thermodynamic models discussed in Kahwaji and White (2018) [1] to develop a computational tool that calculates the eutectic compositions and thermal properties of eutectic mixtures of PCMs. The computational tool is part of this article and consists of a Microsoft Excel® file available in Mendeley Data repository [2]. A description of the computational tool along with the properties of nearly 100 binary mixtures of fatty acid PCMs calculated using this tool are also included in the present article. The Excel® file is designed such that it can be easily modified or expanded by users to calculate the properties of eutectic mixtures of other classes of PCMs.

Decision Support Tools Evaluation Report for FAS/PECAD, Version 2.0

NASA Technical Reports Server (NTRS)

Ross, Kenton; McKellip, Rodney; Mason, Ted; Zanoni, Vicki; Morris, Keith

2004-01-01

Global agricultral intelligence is a key element of decision support eithin the U.S. Department of Agriculture (USDA). Estimeates of production and yield issued by the USDA for both foreign and domestic agriculture are primary sources of information for policy and management decision making. The USDA monitors the major global agricultural commodities through the Production Estimates and Crop Assessment Division (PECAD) of its Foreign Agricultural Service (FAS). Specifically, PECAD iintelligence focuses on global agricultural production and on conditions that affect food security. In conjunction with the USDA, NASA is evaluating the potential for products from NASA's Earth Science Enterprise (ESE) missions to add value to PECAD's decision support tools. NASA is usig a systems engineering approach to evaluate the potential enhancement of PECAD's decision support system (DSS)-first by understanding the components of the system and its input requirements, then by recommending NASA products that may be integrated as system inputs to improve the accuracy, quality, or efficiency of the DSS output. This report documents the evaluation phase of the systems engineering process and includes an examination of the system architecture, operations, and input requirements, as well as an initial assessment of specific ESE measurement systems and products that should be considered for their potential to enhance the PECAD DSS.

Tools for outcome prediction in patients with community acquired pneumonia.

PubMed

Khan, Faheem; Owens, Mark B; Restrepo, Marcos; Povoa, Pedro; Martin-Loeches, Ignacio

2017-02-01

Community-acquired pneumonia (CAP) is one of the most common causes of mortality world-wide. The mortality rate of patients with CAP is influenced by the severity of the disease, treatment failure and the requirement for hospitalization and/or intensive care unit (ICU) management, all of which may be predicted by biomarkers and clinical scoring systems. Areas covered: We review the recent literature examining the efficacy of established and newly-developed clinical scores, biological and inflammatory markers such as C-Reactive protein (CRP), procalcitonin (PCT) and Interleukin-6 (IL-6), whether used alone or in conjunction with clinical severity scores to assess the severity of CAP, predict treatment failure, guide acute in-hospital or ICU admission and predict mortality. Expert commentary: The early prediction of treatment failure using clinical scores and biomarkers plays a developing role in improving survival of patients with CAP by identifying high-risk patients requiring hospitalization or ICU admission; and may enable more efficient allocation of resources. However, it is likely that combinations of scoring systems and biomarkers will be of greater use than individual markers. Further larger studies are needed to corroborate the additive value of these markers to clinical prediction scores to provide a safer and more effective assessment tool for clinicians.

Model-based high-throughput design of ion exchange protein chromatography.

PubMed

Khalaf, Rushd; Heymann, Julia; LeSaout, Xavier; Monard, Florence; Costioli, Matteo; Morbidelli, Massimo

2016-08-12

This work describes the development of a model-based high-throughput design (MHD) tool for the operating space determination of a chromatographic cation-exchange protein purification process. Based on a previously developed thermodynamic mechanistic model, the MHD tool generates a large amount of system knowledge and thereby permits minimizing the required experimental workload. In particular, each new experiment is designed to generate information needed to help refine and improve the model. Unnecessary experiments that do not increase system knowledge are avoided. Instead of aspiring to a perfectly parameterized model, the goal of this design tool is to use early model parameter estimates to find interesting experimental spaces, and to refine the model parameter estimates with each new experiment until a satisfactory set of process parameters is found. The MHD tool is split into four sections: (1) prediction, high throughput experimentation using experiments in (2) diluted conditions and (3) robotic automated liquid handling workstations (robotic workstation), and (4) operating space determination and validation. (1) Protein and resin information, in conjunction with the thermodynamic model, is used to predict protein resin capacity. (2) The predicted model parameters are refined based on gradient experiments in diluted conditions. (3) Experiments on the robotic workstation are used to further refine the model parameters. (4) The refined model is used to determine operating parameter space that allows for satisfactory purification of the protein of interest on the HPLC scale. Each section of the MHD tool is used to define the adequate experimental procedures for the next section, thus avoiding any unnecessary experimental work. We used the MHD tool to design a polishing step for two proteins, a monoclonal antibody and a fusion protein, on two chromatographic resins, in order to demonstrate it has the ability to strongly accelerate the early phases of process development. Copyright © 2016 Elsevier B.V. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Timothy J.; Weise, David; Lincoln, E. N.

Objectives: Project RC-1649, “Advanced Chemical Measurement of Smoke from DoD-prescribed Burns” was undertaken to use advanced instrumental techniques to study in detail the particulate and vapor-phase chemical composition of the smoke that results from prescribed fires used as a land management tool on DoD bases, particularly bases in the southeastern U.S. The statement of need (SON) called for “(1) improving characterization of fuel consumption” and “(2) improving characterization of air emissions under both flaming and smoldering conditions with respect to volatile organic compounds, heavy metals, and reactive gases.” The measurements and fuels were from several bases throughout the southeast (Campmore » Lejeune, Ft. Benning, and Ft. Jackson) and were carried out in collaboration and conjunction with projects 1647 (models) and 1648 (particulates, SW bases). Technical Approach: We used an approach that featured developing techniques for measuring biomass burning emission species in both the laboratory and field and developing infrared (IR) spectroscopy in particular. Using IR spectroscopy and other methods, we developed emission factors (EF, g of effluent per kg of fuel burned) for dozens of chemical species for several common southeastern fuel types. The major measurement campaigns were laboratory studies at the Missoula Fire Sciences Laboratory (FSL) as well as field campaigns at Camp Lejeune, NC, Ft. Jackson, SC, and in conjunction with 1648 at Vandenberg AFB, and Ft. Huachuca. Comparisons and fusions of laboratory and field data were also carried out, using laboratory fuels from the same bases. Results: The project enabled new technologies and furthered basic science, mostly in the area of infrared spectroscopy, a broadband method well suited to biomass burn studies. Advances in hardware, software and supporting reference data realized a nearly 20x improvement in sensitivity and now provide quantitative IR spectra for potential detection of ~60 new species and actual field quantification of several new species such as nitrous acid, glycolaldehyde, α-/β-pinene and D-limonene. The new reference data also permit calculation of the global warming potential (GWP) of the greenhouse gases by enabling 1) detection of their ambient concentrations, and 2) quantifying their ability to absorb IR radiation.« less

Transonic airfoil design for helicopter rotor applications

NASA Technical Reports Server (NTRS)

Hassan, Ahmed A.; Jackson, B.

1989-01-01

Despite the fact that the flow over a rotor blade is strongly influenced by locally three-dimensional and unsteady effects, practical experience has always demonstrated that substantial improvements in the aerodynamic performance can be gained by improving the steady two-dimensional charateristics of the airfoil(s) employed. The two phenomena known to have great impact on the overall rotor performance are: (1) retreating blade stall with the associated large pressure drag, and (2) compressibility effects on the advancing blade leading to shock formation and the associated wave drag and boundary-layer separation losses. It was concluded that: optimization routines are a powerful tool for finding solutions to multiple design point problems; the optimization process must be guided by the judicious choice of geometric and aerodynamic constraints; optimization routines should be appropriately coupled to viscous, not inviscid, transonic flow solvers; hybrid design procedures in conjunction with optimization routines represent the most efficient approach for rotor airfroil design; unsteady effects resulting in the delay of lift and moment stall should be modeled using simple empirical relations; and inflight optimization of aerodynamic loads (e.g., use of variable rate blowing, flaps, etc.) can satisfy any number of requirements at design and off-design conditions.

Instant replay.

PubMed

Rosenthal, David I

2013-06-01

With widespread adoption of electronic health records (EHRs) and electronic clinical documentation, health care organizations now have greater faculty to review clinical data and evaluate the efficacy of quality improvement efforts. Unfortunately, I believe there is a fundamental gap between actual health care delivery and what we document in the current EHR systems. This process of capturing the patient encounter, which I'll refer to as transcription, is prone to significant data loss due to inadequate methods of data capture, multiple points of view, and bias and subjectivity in the transcriptional process. Our current EHR, text-based clinical documentation systems are lossy abstractions - one sided accounts of what take place between patients and providers. Our clinical notes contain the breadcrumbs of relationships, conversations, physical exams, and procedures but often lack the ability to capture the form, the emotions, the images, the nonverbal communication, and the actual narrative of interactions between human beings. I believe that a video record, in conjunction with objective transcriptional services and other forms of data capture, may provide a closer approximation to the truth of health care delivery and may be a valuable tool for healthcare improvement. Copyright © 2013 Elsevier Inc. All rights reserved.

Surgical treatment of solitary brain metastases.

PubMed

Gates, Marilyn; Alsaidi, Mohammed; Kalkanis, Steven

2012-01-01

Brain metastases are the most common form of brain tumors and are diagnosed in about 40% of all patients with systemic malignancies. Although the percentage of solitary brain metastases has dropped in recent estimates from about 50-30% of all patients with brain metastases, this percentage still represents a significant number of patients, and the overall incidence of brain metastases is still on the rise. Historically, brain metastases carried a grim prognosis with a median survival of only a few weeks. The utilization of whole-brain radiation therapy (WBRT) and steroids improved the prognosis to few months. However, it was not until the advent of advanced surgical techniques in conjunction with other treatment modalities such as WBRT and stereotactic radiosurgery that patients became less likely to succumb to neurological complications. In the last few decades, surgical resection has evolved from a mere emergent palliative treatment to a standard treatment modality that has led to improved clinical outcomes in carefully selected patients with brain metastases. This positive contribution has been made possible by randomized clinical trials, advancement of surgical techniques and tools, imaging modalities, and better understanding of the pathophysiology and perioperative care. Copyright © 2012 S. Karger AG, Basel.

Herbal Medicine Treatment for Children with Autism Spectrum Disorder: A Systematic Review

PubMed Central

Lu, Hsu Yuan

2017-01-01

Objective To summarize and evaluate the efficacy and safety of herbal medicines used for the treatment of autism spectrum disorder (ASD) in children. Methods Thirteen electronic databases were searched from their inception to November 2016. Randomized controlled trials (RCTs) that assessed the efficacy of herbal medicines alone or in combination with other Traditional Chinese Medicine treatments for ASD in children were included. The Cochrane Risk of Bias Tool was used and other data analyses were performed using RevMan (Version 5.3). Results Ten RCTs involving 567 patients with ASD were included for qualitative synthesis. In conjunction with conventional therapy, herbal medicines significantly improved the Childhood Autism Rating Scale (CARS) score, but the results of effects on total effective rate (TER) were different between the included studies. The use of herbal medicines with integrative therapy improved the CARS score and TER. In the studies that documented adverse events, no serious events were associated with herbal medicines. Conclusions The efficacy of herbal medicines for the treatment of ASD appears to be encouraging but was inconclusive owing to low methodological quality, herbal medicine diversity, and small sample size of the examined studies. PMID:28592982

NASA Contributions to Improve Understanding of Extreme Events in the Global Energy and Water Cycle

NASA Technical Reports Server (NTRS)

Lapenta, William M.

2008-01-01

The U.S. Climate Change Science Program (CCSP) has established the water cycle goals of the Nation's climate change program. Accomplishing these goals will require, in part, an accurate accounting of the key reservoirs and fluxes associated with the global water and energy cycle, including their spatial and temporal variability. through integration of all necessary observations and research tools, To this end, in conjunction with NASA's Earth science research strategy, the overarching long-term NASA Energy and Water Cycle Study (NEWS) grand challenge can he summarized as documenting and enabling improved, observationally based, predictions of water and energy cycle consequences of Earth system variability and change. This challenge requires documenting and predicting trends in the rate of the Earth's water and energy cycling that corresponds to climate change and changes in the frequency and intensity of naturally occurring related meteorological and hydrologic events, which may vary as climate may vary in the future. The cycling of water and energy has obvious and significant implications for the health and prosperity of our society. The importance of documenting and predicting water and energy cycle variations and extremes is necessary to accomplish this benefit to society.

Recent advances in heterocycle generation using the efficient Ugi multiple-component condensation reaction.

PubMed

Tempest, Paul A

2005-11-01

The current trend of rising research spending and falling numbers of novel chemical entities continues to drive efforts aimed at increasing efficiency in the drug discovery process. Strategic issues, such as assigning resources to poorly validated targets have been implicated in the declining productivity of recent years. Tactical approaches employed to improve this situation include attempts to speed the discovery process toward decision points in a timely manner. Accelerating the optimization of high-throughput screening hits is a goal in streamlining the discovery process, and the use of multiple-component condensation (MCC) reactions have proved useful toward this end. MCC reactions are powerful and efficient tools for the generation of diverse compound sets. Collections of compounds can be synthesized with all of the required diversity elements included in a single synthetic step. One of the most widely investigated MCC reactions is the Ugi four-component condensation. This review highlights disclosures of the Ugi reaction published over the past two years (2003 to 2005) in three areas: (i) Ugi reaction in conjunction with post-condensation cyclization; (ii) bifunctional condensations leading to heterocyclic cores; and (iii) general findings relating to linear products or interesting improvements in the basic Ugi reaction.

Covariance Manipulation for Conjunction Assessment

NASA Technical Reports Server (NTRS)

Hejduk, M. D.

2016-01-01

The manipulation of space object covariances to try to provide additional or improved information to conjunction risk assessment is not an uncommon practice. Types of manipulation include fabricating a covariance when it is missing or unreliable to force the probability of collision (Pc) to a maximum value ('PcMax'), scaling a covariance to try to improve its realism or see the effect of covariance volatility on the calculated Pc, and constructing the equivalent of an epoch covariance at a convenient future point in the event ('covariance forecasting'). In bringing these methods to bear for Conjunction Assessment (CA) operations, however, some do not remain fully consistent with best practices for conducting risk management, some seem to be of relatively low utility, and some require additional information before they can contribute fully to risk analysis. This study describes some basic principles of modern risk management (following the Kaplan construct) and then examines the PcMax and covariance forecasting paradigms for alignment with these principles; it then further examines the expected utility of these methods in the modern CA framework. Both paradigms are found to be not without utility, but only in situations that are somewhat carefully circumscribed.

Smartphone based face recognition tool for the blind.

PubMed

Kramer, K M; Hedin, D S; Rolkosky, D J

2010-01-01

The inability to identify people during group meetings is a disadvantage for blind people in many professional and educational situations. To explore the efficacy of face recognition using smartphones in these settings, we have prototyped and tested a face recognition tool for blind users. The tool utilizes Smartphone technology in conjunction with a wireless network to provide audio feedback of the people in front of the blind user. Testing indicated that the face recognition technology can tolerate up to a 40 degree angle between the direction a person is looking and the camera's axis and a 96% success rate with no false positives. Future work will be done to further develop the technology for local face recognition on the smartphone in addition to remote server based face recognition.

Applications of molecular physics 'biotechnology' to the rational design of an improved phenytoin analogue.

PubMed

Weaver, D F

1992-12-01

This study exploits molecular physics, in conjunction with a large scale computing environment, as a tool for understanding the clinical phenomenology of phenytoin (PHT) toxicology at a molecular level and for employing this understanding in an attempt to design improved drugs. The application of molecular physics techniques, such as quantum mechanics and molecular force field calculations, to the process of rational anticonvulsant drug design remains virtually unexplored. A 3-step strategy for applying these techniques to the design of an improved PHT molecule is presented. Step 1 employs quantitative structure-activity relationship calculations on 80 PHT analogues to ascertain the portion of the PHT molecule necessary for bioactivity (i.e. the 'bioactive face' of PHT); the N3-C4(O)-C5-R fragment of PHT was identified as the bioactive face. Step 2 employs molecular modelling studies to determine the portion of the PHT molecule necessary for the teratogenic, mutagenic and connective tissue toxicities of PHT (i.e. the 'biotoxic face'); the C2(O)-N3 fragment of PHT was identified as the biotoxic face. Step 3 experiments design an 'improved' PHT analogue, which maintains the bioactive face while eliminating the integrity of the biotoxic face; 2-deoxy-5,5-diphenylhydantoin was designed and synthesized as the improved PHT analogue. This compound had biological activity equivalent to PHT, but was unable to bind to nucleic acids or to chelate metals involved in connective tissue metabolism.

The Immunomodulatory Role of Adjuvants in Vaccines Formulated with the Recombinant Antigens Ov-103 and Ov-RAL-2 against Onchocerca volvulus in Mice.

PubMed

Hess, Jessica A; Zhan, Bin; Torigian, April R; Patton, John B; Petrovsky, Nikolai; Zhan, Tingting; Bottazzi, Maria Elena; Hotez, Peter J; Klei, Thomas R; Lustigman, Sara; Abraham, David

2016-07-01

In some regions in Africa, elimination of onchocerciasis may be possible with mass drug administration, although there is concern based on several factors that onchocerciasis cannot be eliminated solely through this approach. A vaccine against Onchocerca volvulus would provide a critical tool for the ultimate elimination of this infection. Previous studies have demonstrated that immunization of mice with Ov-103 and Ov-RAL-2, when formulated with alum, induced protective immunity. It was hypothesized that the levels of protective immunity induced with the two recombinant antigens formulated with alum would be improved by formulation with other adjuvants known to enhance different types of antigen-specific immune responses. Immunizing mice with Ov-103 and Ov-RAL-2 in conjunction with alum, Advax 2 and MF59 induced significant levels of larval killing and host protection. The immune response was biased towards Th2 with all three of the adjuvants, with IgG1 the dominant antibody. Improved larval killing and host protection was observed in mice immunized with co-administered Ov-103 and Ov-RAL-2 in conjunction with each of the three adjuvants as compared to single immunizations. Antigen-specific antibody titers were significantly increased in mice immunized concurrently with the two antigens. Based on chemokine levels, it appears that neutrophils and eosinophils participate in the protective immune response induced by Ov-103, and macrophages and neutrophils participate in immunity induced by Ov-RAL-2. The mechanism of protective immunity induced by Ov-103 and Ov-RAL-2, with the adjuvants alum, Advax 2 and MF59, appears to be multifactorial with roles for cytokines, chemokines, antibody and specific effector cells. The vaccines developed in this study have the potential of reducing the morbidity associated with onchocerciasis in humans.

Action Research: Improving Schools and Empowering Educators. Third Edition

ERIC Educational Resources Information Center

Mertler, Craig A.

2011-01-01

Written for pre- and in-service educators, this "Third Edition" of Craig A. Mertler's "Action Research: Improving Schools and Empowering Educators" introduces the process of conducting one's own classroom- or school-based action research in conjunction with everyday instructional practices and activities. The text provides educators with the…

Intervention for Improving Comprehension in 4-6 Year Old Children with Specific Language Impairment: Practicing Inferencing Is a Good Thing

ERIC Educational Resources Information Center

Desmarais, Chantal; Nadeau, Line; Trudeau, Natacha; Filiatrault-Veilleux, Pamela; Maxes-Fournier, Catherine

2013-01-01

Few studies report on therapy to improve language comprehension in children with specific language impairment (SLI). We address this gap by measuring the effect of a systematic intervention to improve inferential comprehension using dialogic reading tasks in conjunction with pre-determined questions and cues. Sixteen children with a diagnosis of…

Hygiene on maternity units: lessons from a needs assessment in Bangladesh and India

PubMed Central

Cross, Suzanne; Afsana, Kaosar; Banu, Morsheda; Mavalankar, Dileep; Morrison, Emma; Rahman, Atiya; Roy, Tapash; Saxena, Deepak; Vora, Kranti; Graham, Wendy J

2016-01-01

Background As the proportion of deliveries in health institutions increases in low- and middle-income countries, so do the challenges of maintaining standards of hygiene and preventing healthcare-associated infections (HCAIs) in mothers and babies. Adequate water, sanitation, and hygiene (WASH) and infection prevention and control (IPC) in these settings should be seen as integral parts of the broader domain of quality care. Assessment approaches are needed which capture standards for both WASH and IPC, and so inform quality improvement processes. Design A needs assessment was conducted in seven maternity units in Gujarat, India, and eight in Dhaka Division, Bangladesh in 2014. The WASH & CLEAN study developed and applied a suite of tools – a ‘walkthrough checklist’ which included the collection of swab samples, a facility needs assessment tool and document review, and qualitative interviews with staff and recently delivered women – to establish the state of hygiene as measured by visual cleanliness and the presence of potential pathogens, and individual and contextual determinants or drivers. Results No clear relationship was found between visually assessed cleanliness and the presence of pathogens; findings from qualitative interviews and the facility questionnaire found inadequacies in IPC training for healthcare providers and no formal training at all for ward cleaners. Lack of written policies and protocols, and poor monitoring and supervision also contributed to suboptimal IPC standards. Conclusions Visual assessment of cleanliness and hygiene is an inadequate marker for ‘safety’ in terms of the presence of potential pathogens and associated risk of infection. Routine environmental screening of high-risk touch sites using simple microbiology could improve detection and control of pathogens. IPC training for both healthcare providers and ward cleaners represents an important opportunity for quality improvement. This should occur in conjunction with broader systems changes, including the establishment of functioning IPC committees, implementing standard policies and protocols, and improving health management information systems to capture information on maternal and newborn HCAIs. PMID:27964775

A Novel Application of Agent-based Modeling: Projecting Water Access and Availability Using a Coupled Hydrologic Agent-based Model in the Nzoia Basin, Kenya

NASA Astrophysics Data System (ADS)

Le, A.; Pricope, N. G.

2015-12-01

Projections indicate that increasing population density, food production, and urbanization in conjunction with changing climate conditions will place stress on water resource availability. As a result, a holistic understanding of current and future water resource distribution is necessary for creating strategies to identify the most sustainable means of accessing this resource. Currently, most water resource management strategies rely on the application of global climate predictions to physically based hydrologic models to understand potential changes in water availability. However, the need to focus on understanding community-level social behaviors that determine individual water usage is becoming increasingly evident, as predictions derived only from hydrologic models cannot accurately represent the coevolution of basin hydrology and human water and land usage. Models that are better equipped to represent the complexity and heterogeneity of human systems and satellite-derived products in place of or in conjunction with historic data significantly improve preexisting hydrologic model accuracy and application outcomes. We used a novel agent-based sociotechnical model that combines the Soil and Water Assessment Tool (SWAT) and Agent Analyst and applied it in the Nzoia Basin, an area in western Kenya that is becoming rapidly urbanized and industrialized. Informed by a combination of satellite-derived products and over 150 household surveys, the combined sociotechnical model provided unique insight into how populations self-organize and make decisions based on water availability. In addition, the model depicted how population organization and current management alter water availability currently and in the future.

Application of ARC/INFO to regional scale hydrogeologic modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wurstner, S.K.; McWethy, G.; Devary, J.L.

1993-05-01

Geographic Information Systems (GIS) can be a useful tool in data preparation for groundwater flow modeling, especially when studying large regional systems. ARC/INFO is being used in conjunction with GRASS to support data preparation for input to the CFEST (Coupled Fluid, Energy, and Solute Transport) groundwater modeling code. Simulations will be performed with CFEST to model three-dimensional, regional, groundwater flow in the West Siberian Basin.

Assessing Sonar Performance in Realistic Environments

DTIC Science & Technology

2012-10-01

ASPIRE project, a number of shortcomings were identified in conjunction with RCN partners in the 1C (Underwater Warfare) Thrust. These were: • There is...and the algorithms and models integrated into it to be tested on non-research platforms such as RCN ships. Much of the work undertaken in WBE 2...Sensitivity and Transmission Estimation Tool R & D Research and Development RCN Royal Canadian Navy REA Rapid Environmental Assessment REP Recognized

Spatial and temporal distribution of fire temperatures from prescribed fires in the mixed oak forests of southern Ohio

Treesearch

Louis R. Iverson; Daniel Yaussy; Joanne Rebbeck; Todd Hutchinson; Robert Long; Brian McCarthy; Cynthia Riccardi; Anantha Prasad

2003-01-01

Prescribed surface fires are being investigated, in conjunction with thinning, as silvicultural tools for assisting in the regeneration of mixed oak forests in the Central Hardwoods Region. Fires were conducted on 2001 March 28 and 2001 April 4-5, respectively, at the Tar Hollow (TAR) and Zaleski (ZAL) State Forests, and at the Raccoon Ecological Management Area (REMA...

Development of the KARI Space Debris Collision Risk Management System (KARISMA)

NASA Astrophysics Data System (ADS)

Kim, Hae-Dong; Lee, Sang-Cherl; Cho, Dong-Hyun; Seong, Jae-Dong

2018-05-01

Korea has been operating multi-purpose low-earth orbit (LEO) satellites such as the Korea multi-purpose satellite (KOMPSAT) since 1999 and the Communication, Ocean, and Meteorological Satellite (COMS), which was launched into geostationary orbit in 2006. The Korea Aerospace Research Institute (KARI) consequently became concerned about the deteriorating space debris environment. This led to the instigation, in 2011, of a project to develop the KARI space debris collision risk management system (KARISMA). In 2014, KARISMA was adopted as an official tool at the KARI ground station and is operated to mitigate collision risks while being continuously upgraded with input from satellite operators. The characteristics and architecture of KARISMA are described with detailed operational views. The user-friendly user interfaces including 2D and 3D displays of the results, conjunction geometries, and so on, are described in detail. The results of our analysis of the space collision risk faced by the KOMPSAT satellites as determined using KARISMA are presented, as well as optimized collision avoidance maneuver planning with maneuvering strategies for several conjunction events. Consequently, the development of KARISMA to provide detailed descriptions is expected to contribute significantly to satellite operators and owners who require tools with many useful functions to mitigate collision risk.

NEON's Mobile Deployment Platform: A research tool for integrating ecological processes across scales

NASA Astrophysics Data System (ADS)

Sanclements, M.

2016-12-01

Here we provide an update on construction of the five NEON Mobile Deployment Platforms (MDPs) as well as a description of the infrastructure and sensors available to researchers in the near future. Additionally, we include information (i.e. timelines and procedures) on requesting MDPs for PI led projects. The MDPs will provide the means to observe stochastic or spatially important events, gradients, or quantities that cannot be reliably observed using fixed location sampling (e.g. fires and floods). Due to the transient temporal and spatial nature of such events, the MDPs are designed to accommodate rapid deployment for time periods up to 1 year. Broadly, the MDPs are comprised of infrastructure and instrumentation capable of functioning individually or in conjunction with one another to support observations of ecological change, as well as education, training and outreach. More specifically, the MDPs include the capability to make tower based measures of ecosystem exchange, radiation, and precipitation in conjunction with baseline soils data such as CO2 flux, and soil temperature and moisture. An aquatics module is also available with the MDP to facilitate research integrating terrestrial and aquatic processes. Ultimately, the NEON MDPs provides a tool for linking PI led research to the continental scale data sets collected by NEON.

Using MCBEND for neutron or gamma-ray deterministic calculations

NASA Astrophysics Data System (ADS)

Geoff, Dobson; Adam, Bird; Brendan, Tollit; Paul, Smith

2017-09-01

MCBEND 11 is the latest version of the general radiation transport Monte Carlo code from AMEC Foster Wheeler's ANSWERS® Software Service. MCBEND is well established in the UK shielding community for radiation shielding and dosimetry assessments. MCBEND supports a number of acceleration techniques, for example the use of an importance map in conjunction with Splitting/Russian Roulette. MCBEND has a well established automated tool to generate this importance map, commonly referred to as the MAGIC module using a diffusion adjoint solution. This method is fully integrated with the MCBEND geometry and material specification, and can easily be run as part of a normal MCBEND calculation. An often overlooked feature of MCBEND is the ability to use this method for forward scoping calculations, which can be run as a very quick deterministic method. Additionally, the development of the Visual Workshop environment for results display provides new capabilities for the use of the forward calculation as a productivity tool. In this paper, we illustrate the use of the combination of the old and new in order to provide an enhanced analysis capability. We also explore the use of more advanced deterministic methods for scoping calculations used in conjunction with MCBEND, with a view to providing a suite of methods to accompany the main Monte Carlo solver.

BORE II

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bore II, co-developed by Berkeley Lab researchers Frank Hale, Chin-Fu Tsang, and Christine Doughty, provides vital information for solving water quality and supply problems and for improving remediation of contaminated sites. Termed "hydrophysical logging," this technology is based on the concept of measuring repeated depth profiles of fluid electric conductivity in a borehole that is pumping. As fluid enters the wellbore, its distinct electric conductivity causes peaks in the conductivity log that grow and migrate upward with time. Analysis of the evolution of the peaks enables characterization of groundwater flow distribution more quickly, more cost effectively, and with higher resolutionmore » than ever before. Combining the unique interpretation software Bore II with advanced downhole instrumentation (the hydrophysical logging tool), the method quantifies inflow and outflow locations, their associated flow rates, and the basic water quality parameters of the associated formation waters (e.g., pH, oxidation-reduction potential, temperature). In addition, when applied in conjunction with downhole fluid sampling, Bore II makes possible a complete assessment of contaminant concentration within groundwater.« less

Effectiveness of international environmental regimes: Existing knowledge, cutting-edge themes, and research strategies

PubMed Central

Young, Oran R.

2011-01-01

International environmental regimes—especially those regimes articulated in multilateral environmental agreements—have been a subject of intense interest within the scientific community over the last three decades. However, there are substantial differences of opinion regarding the effectiveness of these governance systems or the degree to which they are successful in solving the problems leading to their creation. This article provides a critical review of the literature on this topic. It extracts and summarizes what is known about the effectiveness of environmental regimes in the form of a series of general and specific propositions. It identifies promising topics for consideration in the next phase of research in this field. Additionally, it comments on the research strategies available to pursue this line of analysis. The general conclusions are that international environmental regimes can and do make a difference, although often in conjunction with a number of other factors, and that a strategy of using a number of tools combined can help to improve understanding of the determinants of success. PMID:22143795

Application of a 980-nanometer diode laser in neuroendoscopy: a case series.

PubMed

Reis, Rodolfo Casimiro; Teixeira, Manoel Jacobsen; Mancini, Marilia Wellichan; Almeida-Lopes, Luciana; de Oliveira, Matheus Fernandes; Pinto, Fernando Campos Gomes

2016-02-01

Ventricular neuroendoscopy represents an important advance in the treatment of hydrocephalus. High-power (surgical) Nd:YAG laser and low-level laser therapy (using 685-nm-wavelength diode laser) have been used in conjunction with neuroendoscopy with favorable results. This study evaluated the use of surgical 980-nm-wavelength diode laser for the neuroendoscopic treatment of ventricular diseases. Nine patients underwent a neuroendoscopic procedure with 980-nm diode laser. Complications and follow-up were recorded. Three in-hospital postoperative complications were recorded (1 intraventricular hemorrhage and 2 meningitis cases). The remaining 6 patients had symptom improvement after endoscopic surgery and were discharged from the hospital within 24-48 hours after surgery. Patients were followed for an average of 14 months: 1 patient developed meningitis and another died suddenly at home. The other patients did well and were asymptomatic until the last follow-up consultation. The 980-nm diode laser is considered an important therapeutic tool for endoscopic neurological surgeries. This study showed its application in different ventricular diseases.

Geosites inventory of the northwestern Tabular Middle Atlas of Morocco

NASA Astrophysics Data System (ADS)

El Wartiti, Mohamed; Malaki, Amina; Zahraoui, Mohamed; El Ghannouchi, Abdelilah; di Gregorio, Felice

2008-07-01

Across the northwestern Tabular Middle Atlas of Morocco there are many examples of landscapes, rocks and fossils that provide key evidence of a particular moment or period in Earth history. Such Earth heritage sites are important for educating the general public in environmental matters. They also serve as tools for demonstrating sustainable development and for illustrating methods of site conservation as well as remembering that rocks, minerals, fossils, soils, landforms form an integral part of the natural world. The significance of certain sites for aesthetic or tourism reasons is obvious. There are numerous geosites, which could contribute to effective exploitation of geotourism, often in conjunction with ecotourism. The strategy employed to such sites involves close consultation with all communities in the vicinity of the respective geosite and is not only aimed at tourism and education, but also at sustainable improvement of the infrastructure of the people of this area. Geological heritage sites, properly managed, can generate employment and new economic activities, especially in regions in need of new or additional sources of income.

Putting food on the public health table: Making food security relevant to regional health authorities.

PubMed

Rideout, Karen; Seed, Barbara; Ostry, Aleck

2006-01-01

Food security is emerging as an increasingly important public health issue. The purpose of this paper is to describe a conceptual model and five classes of food security indicators for regional health authorities (RHAs): direct, indirect, consequence, process, and supra-regional. The model was developed after a review of the food security literature and interviews with British Columbia community nutritionists and public health officials. We offer this conceptual model as a practical tool to help RHAs develop a comprehensive framework and use specific indicators, in conjunction with public health nutritionists and other community stakeholders. We recommend using all five classes of indicator together to ensure a complete assessment of the full breadth of food security. This model will be useful for Canadian health authorities wishing to take a holistic community-based approach to public health nutrition to develop more effective policies and programs to maximize food security. The model and indicators offer a rational process that could be useful for collaborative multi-stakeholder initiatives to improve food security.

[Nuclear cardiology with new radiopharmaceuticals].

PubMed

Bunko, H

1994-08-01

In the field of nuclear cardiology, 99mTc labeled myocardial perfusion agents such as MIBI, Tetrofosmin and Teboroxime, 111In-antimyosin for imaging of myocardial necrosis, 123I-betamethyl-iodophenylpentadecanoic acid (BMIPP) for imaging of myocardial fatty acid metabolism and 123I-metaiodobenzylguanidine (MIBG) for imaging of myocardial adrenergic function are introduced recently in Japan. Improved image quality and simultaneous evaluation of myocardial perfusion, function and wall motion can be obtained with use of 99mTc labeled myocardial perfusion agents. 111In-antimyosin enables specific imaging of myocardial necrosis which leads to the use for wide variety of heart diseases. Discrepancy of the myocardial perfusion and metabolism in case of stunned myocardium or cardiomyopathy can be evaluated by 123I-BMIPP in conjunction with perfusion agent. Recently wide variety of diseases which may have cardiac adrenergic abnormality are targeted for 123I-MIBG imaging. These new radiopharmaceuticals are expected to be powerful tool for evaluation of the pathophysiology including severity and prognosis and evaluation of the etiology of the various heart diseases.

A Method for Approximating the Bivariate Normal Correlation Coefficient.

ERIC Educational Resources Information Center

Kirk, David B.

Improvements of the Gaussian quadrature in conjunction with the Newton-Raphson iteration technique (TM 000 789) are discussed as effective methods of calculating the bivariate normal correlation coefficient. (CK)

Conjunctive Management of Multi-Aquifer System for Saltwater Intrusion Mitigation

NASA Astrophysics Data System (ADS)

Tsai, F. T. C.; Pham, H. V.

2015-12-01

Due to excessive groundwater withdrawals, many water wells in Baton Rouge, Louisiana experience undesirable chloride concentration because of saltwater intrusion. The study goal is to develop a conjunctive management framework that takes advantage of the Baton Rouge multi-aquifer system to mitigate saltwater intrusion. The conjunctive management framework utilizes several hydraulic control techniques to mitigate saltwater encroachment. These hydraulic control approaches include pumping well relocation, freshwater injection, saltwater scavenging, and their combinations. Specific objectives of the study are: (1) constructing scientific geologic architectures of the "800-foot" sand, the "1,000-foot" sand, the "1,200-foot" sand, the "1,500-foot" sand, the "1,700-foot" sand, and the "2,000-foot" sand, (2) developing scientific saltwater intrusion models for these sands. (3) using connector wells to draw native groundwater from one sand and inject to another sand to create hydraulic barriers to halt saltwater intrusion, (4) using scavenger wells or well couples to impede saltwater intrusion progress and reduce chloride concentration in pumping wells, and (5) reducing cones of depression by relocating and dispersing pumping wells to different sands. The study utilizes optimization techniques and newest LSU high performance computing (HPC) facilities to derive solutions. The conjunctive management framework serves as a scientific tool to assist policy makers to solve the urgent saltwater encroachment issue in the Baton Rouge area. The research results will help water companies as well as industries in East Baton Rouge Parish and neighboring parishes by reducing their saltwater intrusion threats, which in turn would sustain Capital Area economic development.

Laser beam shaping for studying thermally induced damage

NASA Astrophysics Data System (ADS)

Masina, Bathusile N.; Bodkin, Richard; Mwakikunga, Bonex; Forbes, Andrew

2011-10-01

This paper presents an implementation of a laser beam shaping system for both heating a diamond tool and measuring the resulting temperature optically. The influence the initial laser parameters have on the resultant temperature profiles is shown experimentally and theoretically. A CO2 laser beam was used as the source to raise the temperature of the diamond tool and the resultant temperature was measured by using the blackbody principle. We have successfully transformed a Gaussian beam profile into a flat-top beam profile by using a diffractive optical element as a phase element in conjunction with a Fourier transforming lens. In this paper, we have successfully demonstrated temperature profiles across the diamond tool surface using two laser beam profiles and two optical setups, thus allowing a study of temperature influences with and without thermal stress. The generation of such temperature profiles on the diamond tool in the laboratory is important in the study of changes that occur in diamond tools, particularly the reduced efficiency of such tools in applications where extreme heating due to friction is expected.

Middle Man Concept for In-Orbit Collision Risks Mitigation, CAESAR and CARA Examples

NASA Technical Reports Server (NTRS)

Moury, Monique; Newman, Lauri K.; Laporte, Francois

2014-01-01

This paper describes the conjunction analysis which has to be performed using data provided by JSpOC. This description not only demonstrates that Collision Avoidance is a 2- step process (close approach detection followed by risk evaluation for collision avoidance decision) but also leads to the conclusion that there is a need for a Middle Man role. After describing the Middle Man concept, this paper introduces two examples with their similarities and particularities: the American civil space effort delivered by the NASA CARA team (Conjunction Assessment Risk Analysis) and the French response CAESAR (Conjunction Assessment and Evaluation Service: Alerts and Recommendations). For both, statistics are presented and feedbacks discussed. All together, around 80 satellites are served by CARA and/or CAESAR. Both processes regularly evolve in order either to follow JSpOC upgrades or to improve analysis according to experience acquired during the past years.

Evolution and Implementation of the NASA Robotic Conjunction Assessment Risk Analysis Concept of Operations

NASA Technical Reports Server (NTRS)

Newman, Lauri K.; Frigm, Ryan C.; Duncan, Matthew G.; Hejduk, Matthew D.

2014-01-01

Reacting to potential on-orbit collision risk in an operational environment requires timely and accurate communication and exchange of data, information, and analysis to ensure informed decision-making for safety of flight and responsible use of the shared space environment. To accomplish this mission, it is imperative that all stakeholders effectively manage resources: devoting necessary and potentially intensive resource commitment to responding to high-risk conjunction events and preventing unnecessary expenditure of resources on events of low collision risk. After 10 years of operational experience, the NASA Robotic Conjunction Assessment Risk Analysis (CARA) is modifying its Concept of Operations (CONOPS) to ensure this alignment of collision risk and resource management. This evolution manifests itself in the approach to characterizing, reporting, and refining of collision risk. Implementation of this updated CONOPS is expected to have a demonstrated improvement on the efficacy of JSpOC, CARA, and owner/operator resources.

Synthesis and high catalytic properties of mesoporous Pt nanowire array by novel conjunct template method

NASA Astrophysics Data System (ADS)

Zhong, Yi; Xu, Cai-Ling; Kong, Ling-Bin; Li, Hu-Lin

2008-12-01

A novel conjunct template method for fabricating mesoporous Pt nanowire array through direct current (DC) electrodeposition of Pt into the pores of anodic aluminum oxide (AAO) template on Ti/Si substrate from hexagonal structured lyotropic liquid crystalline phase is demonstrated in this paper. The morphology and structure of as-prepared Pt nanowire array are characterized by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD). The electrocatalytic properties of Pt nanowire array for methanol are also investigated in detail. The results indicate that Pt nanowire array has the unique mesoporous structure of approximate 40-50 nm in diameter, which resulted in the high surface area and greatly improved electrocatalytic activity for methanol. The mesoporous Pt nanowire array synthesized by the new conjunct template method has a very promising application in portable fuel cell power sources.

Improving the Process of Career Decision Making: An Action Research Approach

ERIC Educational Resources Information Center

Greenbank, Paul

2011-01-01

Purpose: This study adopts an action research approach with the aim of improving the process of career decision making among undergraduates in a business school at a "new" university in the UK. Design/methodology/approach: The study utilised unfreezing techniques, multiple case studies in conjunction with the principle of analogical…

Flux-Based Finite Volume representations for general thermal problems

NASA Technical Reports Server (NTRS)

Mohan, Ram V.; Tamma, Kumar K.

1993-01-01

Flux-Based Finite Volume (FV) element representations for general thermal problems are given in conjunction with a generalized trapezoidal gamma-T family of algorithms, formulated following the spirit of what we term as the Lax-Wendroff based FV formulations. The new flux-based representations introduced offer an improved physical interpretation of the problem along with computationally convenient and attractive features. The space and time discretization emanate from a conservation form of the governing equation for thermal problems, and in conjunction with the flux-based element representations give rise to a physically improved and locally conservative numerical formulations. The present representations seek to involve improved locally conservative properties, improved physical representations and computational features; these are based on a 2D, bilinear FV element and can be extended for other cases. Time discretization based on a gamma-T family of algorithms in the spirit of a Lax-Wendroff based FV formulations are employed. Numerical examples involving linear/nonlinear steady and transient situations are shown to demonstrate the applicability of the present representations for thermal analysis situations.

Transportation Improvement Program - FY 1997-2000 - Allen County

DOT National Transportation Integrated Search

1996-02-01

The Lima-Allen County Regional Planning Commission (LACRPC), as the Metropolitan Planning Organization (MPO) of the Lima Urbanized Area, in conjunction with the Ohio Department of Transportation (ODOT), is responsible for coordinating transportation ...

Software for pre-processing Illumina next-generation sequencing short read sequences

PubMed Central

2014-01-01

Background When compared to Sanger sequencing technology, next-generation sequencing (NGS) technologies are hindered by shorter sequence read length, higher base-call error rate, non-uniform coverage, and platform-specific sequencing artifacts. These characteristics lower the quality of their downstream analyses, e.g. de novo and reference-based assembly, by introducing sequencing artifacts and errors that may contribute to incorrect interpretation of data. Although many tools have been developed for quality control and pre-processing of NGS data, none of them provide flexible and comprehensive trimming options in conjunction with parallel processing to expedite pre-processing of large NGS datasets. Methods We developed ngsShoRT (next-generation sequencing Short Reads Trimmer), a flexible and comprehensive open-source software package written in Perl that provides a set of algorithms commonly used for pre-processing NGS short read sequences. We compared the features and performance of ngsShoRT with existing tools: CutAdapt, NGS QC Toolkit and Trimmomatic. We also compared the effects of using pre-processed short read sequences generated by different algorithms on de novo and reference-based assembly for three different genomes: Caenorhabditis elegans, Saccharomyces cerevisiae S288c, and Escherichia coli O157 H7. Results Several combinations of ngsShoRT algorithms were tested on publicly available Illumina GA II, HiSeq 2000, and MiSeq eukaryotic and bacteria genomic short read sequences with the focus on removing sequencing artifacts and low-quality reads and/or bases. Our results show that across three organisms and three sequencing platforms, trimming improved the mean quality scores of trimmed sequences. Using trimmed sequences for de novo and reference-based assembly improved assembly quality as well as assembler performance. In general, ngsShoRT outperformed comparable trimming tools in terms of trimming speed and improvement of de novo and reference-based assembly as measured by assembly contiguity and correctness. Conclusions Trimming of short read sequences can improve the quality of de novo and reference-based assembly and assembler performance. The parallel processing capability of ngsShoRT reduces trimming time and improves the memory efficiency when dealing with large datasets. We recommend combining sequencing artifacts removal, and quality score based read filtering and base trimming as the most consistent method for improving sequence quality and downstream assemblies. ngsShoRT source code, user guide and tutorial are available at http://research.bioinformatics.udel.edu/genomics/ngsShoRT/. ngsShoRT can be incorporated as a pre-processing step in genome and transcriptome assembly projects. PMID:24955109

E-DECIDER: Using Earth Science Data and Modeling Tools to Develop Decision Support for Earthquake Disaster Response

NASA Astrophysics Data System (ADS)

Glasscoe, Margaret T.; Wang, Jun; Pierce, Marlon E.; Yoder, Mark R.; Parker, Jay W.; Burl, Michael C.; Stough, Timothy M.; Granat, Robert A.; Donnellan, Andrea; Rundle, John B.; Ma, Yu; Bawden, Gerald W.; Yuen, Karen

2015-08-01

Earthquake Data Enhanced Cyber-Infrastructure for Disaster Evaluation and Response (E-DECIDER) is a NASA-funded project developing new capabilities for decision making utilizing remote sensing data and modeling software to provide decision support for earthquake disaster management and response. E-DECIDER incorporates the earthquake forecasting methodology and geophysical modeling tools developed through NASA's QuakeSim project. Remote sensing and geodetic data, in conjunction with modeling and forecasting tools allows us to provide both long-term planning information for disaster management decision makers as well as short-term information following earthquake events (i.e. identifying areas where the greatest deformation and damage has occurred and emergency services may need to be focused). This in turn is delivered through standards-compliant web services for desktop and hand-held devices.

New Applications for Phage Integrases

PubMed Central

Fogg, Paul C.M.; Colloms, Sean; Rosser, Susan; Stark, Marshall; Smith, Margaret C.M.

2014-01-01

Within the last 25 years, bacteriophage integrases have rapidly risen to prominence as genetic tools for a wide range of applications from basic cloning to genome engineering. Serine integrases such as that from ϕC31 and its relatives have found an especially wide range of applications within diverse micro-organisms right through to multi-cellular eukaryotes. Here, we review the mechanisms of the two major families of integrases, the tyrosine and serine integrases, and the advantages and disadvantages of each type as they are applied in genome engineering and synthetic biology. In particular, we focus on the new areas of metabolic pathway construction and optimization, biocomputing, heterologous expression and multiplexed assembly techniques. Integrases are versatile and efficient tools that can be used in conjunction with the various extant molecular biology tools to streamline the synthetic biology production line. PMID:24857859

Radiometry simulation within the end-to-end simulation tool SENSOR

NASA Astrophysics Data System (ADS)

Wiest, Lorenz; Boerner, Anko

2001-02-01

12 An end-to-end simulation is a valuable tool for sensor system design, development, optimization, testing, and calibration. This contribution describes the radiometry module of the end-to-end simulation tool SENSOR. It features MODTRAN 4.0-based look up tables in conjunction with a cache-based multilinear interpolation algorithm to speed up radiometry calculations. It employs a linear reflectance parameterization to reduce look up table size, considers effects due to the topology of a digital elevation model (surface slope, sky view factor) and uses a reflectance class feature map to assign Lambertian and BRDF reflectance properties to the digital elevation model. The overall consistency of the radiometry part is demonstrated by good agreement between ATCOR 4-retrieved reflectance spectra of a simulated digital image cube and the original reflectance spectra used to simulate this image data cube.

Human Spaceflight Recent Conjunctions of Interest

NASA Technical Reports Server (NTRS)

Browns, Ansley C.

2010-01-01

I. During each nine-hour shift (or upon request), the Orbital Safety Analyst (OSA) at JSpOC updates the entire tracked catalog with the latest tracking data from the SSN and screens this catalog against NASA s assets. a) For ISS operations, a 72-hour advance screening is performed. b) For Shuttle orbit operations, a 36-hour advance screening is performed. c) If a vehicle is performing a maneuver during the screening period, OSA uses post-reboost-trajectory data supplied by Mission Control Center-Houston (MCC-H) for screening. II. An automated process is used to detect any conjunctions within 10 x 40 x 40 km box (centered on the vehicle) using Special Perturbation (SP) processing: a) Box dimensions are Radial x Downtrack x Crosstrack. b) Any object found within this box has the tracking tasking level increased to improve (hopefully) its uncertainty in its current and predicted orbital trajectory. c) OSA informs NASA if any object is found inside a 2 x 25 x 25 km box then creates and sends an Orbital Conjunction Message (OCM) to NASA which contains detailed information about the conjunction. d) For Shuttle, the box size used for screening and reporting is altered for special operations (day of rendezvous, launch screening, etc.).

More than meets the eye: the role of language in binding and maintaining feature conjunctions.

PubMed

Dessalegn, Banchiamlack; Landau, Barbara

2008-02-01

We investigated the effects of language on vision by focusing on a well-known problem: the binding and maintenance of color-location conjunctions. Four-year-olds performed a task in which they saw a target (e.g., a split square, red on the left and green on the right) followed by a brief delay and then were asked to find the target in an array including the target, its reflection (e.g., red on the right and green on the left), and a square with a different geometric split. Errors were overwhelmingly reflections. This finding shows that the children failed to maintain color-location conjunctions. Performance improved when targets were accompanied by sentences specifying color and direction (e.g., "the red is on the left"), but not when the conjunction was highlighted using a nonlinguistic cue (e.g., flashing, pointing, changes in size), nor when sentences specified a nondirectional relationship (e.g., "the red is touching the green"). The relation between children's matching performance and their long-term knowledge of directional terms suggests two distinct mechanisms by which language can temporarily bridge delays, providing more stable representations.

Friction Stir Process Mapping Methodology

NASA Technical Reports Server (NTRS)

Bjorkman, Gerry; Kooney, Alex; Russell, Carolyn

2003-01-01

The weld process performance for a given weld joint configuration and tool setup is summarized on a 2-D plot of RPM vs. IPM. A process envelope is drawn within the map to identify the range of acceptable welds. The sweet spot is selected as the nominal weld schedule The nominal weld schedule is characterized in the expected manufacturing environment. The nominal weld schedule in conjunction with process control ensures a consistent and predictable weld performance.

Ada developers' supplement to the recommended approach

NASA Technical Reports Server (NTRS)

Kester, Rush; Landis, Linda

1993-01-01

This document is a collection of guidelines for programmers and managers who are responsible for the development of flight dynamics applications in Ada. It is intended to be used in conjunction with the Recommended Approach to Software Development (SEL-81-305), which describes the software development life cycle, its products, reviews, methods, tools, and measures. The Ada Developers' Supplement provides additional detail on such topics as reuse, object-oriented analysis, and object-oriented design.

Postoperative osteomyelitis following implant arthroplasty of the foot: diagnosis with indium-111 white blood cell scintigraphy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bakst, R.H.; Kanat, I.O.

1987-11-01

Many complications can occur following insertion of silicone elastomer implants into the foot. Postoperative infection may be difficult to distinguish from other conditions such as dislodgment, fracture, ectopic and heterotopic new bone formation, synovitis, and bursitis. White blood cell scintigraphy, in conjunction with the clinical scenario, may prove to be an invaluable tool in the diagnosis of postoperative osteomyelitis, subsequent to implant arthroplasties. 32 references.

Impact assessment and recommendation of alternative conjunctive water use strategies for salt affected agricultural lands through a field scale decision support system - a case study.

PubMed

Kaur, Ravinder; Paul, Madhumita; Malik, Rashmi

2007-06-01

Conjunctive use of saline/non-saline irrigation waters is generally aimed at minimizing yield losses and enhancing flexibility of cropping, without much alteration in farming operations. Recommendation of location-specific suitable conjunctive water use plans requires assessment of their long-term impacts on soil salinization/sodification and crop yield reductions. This is conventionally achieved through long-term field experiments. However such impact evaluations are site specific, expensive and time consuming. Appropriate decision support systems (DSS) can be time-efficient and cost-effective means for such long-term impact evaluations. This study demonstrates the application of one such (indigenously developed) DSS for recommending best conjunctive water use plans for a, rice-wheat growing, salt affected farmer's field in Gurgaon district of Haryana (India). Before application, the DSS was extensively validated on several farmers and controlled experimental fields in Gurgaon and Karnal districts of Haryana (India). Validation of DSS showed its potential to give realistic estimates of root zone soil salinity (with R = 0.76-0.94; AMRE = 0.03-0.06; RMSPD = 0.51-0.90); sodicity (with R = 0.99; AMRE = 0.02; RMSPD = 0.84) and relative crop yield reductions (AMRE = 0.24), under existing (local) resource management practices. Long term (10 years) root zone salt build ups and associated rice/wheat crop yield reductions, in a salt affected farmer's field, under varied conjunctive water use scenarios were evaluated with the validated DSS. It was observed that long-term applications of canal (CW) and tube well (TW) waters in a cycle and in 1:1 mixed mode, during Kharif season, predicted higher average root zone salt reductions (2-9%) and lower rice crop yield reductions (4-5%) than the existing practice of 3-CW, 3-TW, 3-CW. Besides this, long-term application of 75% CW mixed with 25% TW, during Rabi season, predicted about 17% lower average root-zone salt reductions than the cyclic applications of (1-CW, 1-TW, 2-CW) and (2-CW, 1-TW, 1-CW, i.e., existing irrigation strategy). However, average wheat crop yield reductions (16-17%) simulated under all these strategies were almost at par. In general, cyclic-conjunctive water use strategies emerged as better options than the blending modes. These results were in complete confirmation with actual long-term conjunctive water use experiments on similar soils. It was thus observed that such pre-validated tools could be efficient means for designing, local resource and target crop yield-specific, appropriate conjunctive water use plans for irrigated agricultural lands.

Memory Circuit Fault Simulator

NASA Technical Reports Server (NTRS)

Sheldon, Douglas J.; McClure, Tucker

2013-01-01

Spacecraft are known to experience significant memory part-related failures and problems, both pre- and postlaunch. These memory parts include both static and dynamic memories (SRAM and DRAM). These failures manifest themselves in a variety of ways, such as pattern-sensitive failures, timingsensitive failures, etc. Because of the mission critical nature memory devices play in spacecraft architecture and operation, understanding their failure modes is vital to successful mission operation. To support this need, a generic simulation tool that can model different data patterns in conjunction with variable write and read conditions was developed. This tool is a mathematical and graphical way to embed pattern, electrical, and physical information to perform what-if analysis as part of a root cause failure analysis effort.

Conjunction Assessment for Commercial Satellite Constellations Using Commercial Radar Data Sources

NASA Astrophysics Data System (ADS)

Nicolls, M.; Vittaldev, V.; Ceperley, D.; Creus-Costa, J.; Foster, C.; Griffith, N.; Lu, E.; Mason, J.; Park, I.; Rosner, C.; Stepan, L.

For companies with multiple orbital assets, managing the risk of collision with other low-Earth orbit (LEO) Resident Space Objects (RSOs) can amount to a significant operational burden. LeoLabs and Planet investigate the impact of a workflow that integrates commercial Space Situational Awareness (SSA) data into conjunction assessments for large satellite constellations. Radar measurements from LeoLabs are validated against truth orbits provided by the International Laser Ranging Service (ILRS) and to measurements from Planet’s on-board GPS instrumentation. The radar data is then used as input for orbit fits in order to form the basis of a conjunction assessment. To confirm the reliability of the orbit determination (OD), the generated ephemerides are validated against ILRS and GPS-derived orbits. In addition, a covariance realism assessment is performed in order to check for self-consistency by comparing the propagated orbit and the associated covariance against later measurements. Several cases are investigated to assess the benefits of integrating radar-derived products with Conjunction Data Messages (CDMs) received on Planet spacecraft. Conjunction assessment is refined using onboard GPS measurements from Planet satellites along with tracking measurements of the secondary RSO by LeoLabs. This study demonstrates that commercial data provided by LeoLabs is reliable, accurate, and timely, and that ephemeris generated from LeoLabs data provides solutions and insights which are consistent with those provided in CDMs. For the cases analyzed, the addition of commercial SSA data from LeoLabs has a positive impact on operations due to the additional information on the state of the secondary RSO which can lead to increased confidence in any maneuver-related decisions. Measurements from LeoLabs can also be used to improve conjunction assessment for commercial satellites that do not have any operator OD.

The effect of mirror therapy integrating functional electrical stimulation on the gait of stroke patients.

PubMed

Ji, Sang-Goo; Cha, Hyun-Gyu; Kim, Myoung-Kwon; Lee, Chang-Ryeol

2014-04-01

[Purpose] The aim of the present study was to examine whether mirror therapy in conjunction with FES in stroke patients can improve gait ability. [Subjects] This study was conducted with 30 subjects who were diagnosed with hemiparesis due to stroke. [Methods] Experimental group I contained 10 subjects who received mirror therapy in conjunction with functional electrical stimulation, experimental group II contained 10 subjects who received mirror therapy, and the control group contained 10 subjects who received a sham therapy. A gait analysis was performed using a three-dimensional motion capture system, which was a real-time tracking device that delivers data in an infrared mode via reflective markers using six cameras. [Results] The results showed a significant difference in gait velocity between groups after the experiment, and post hoc analysis revealed significant differences between experimental group I and the control group and between experimental group II and the control group, respectively. There were also significant differences in step length and stride length between the groups after the experiment, and post hoc analysis revealed significant differences between experimental group I and control group. [Conclusion] The present study showed that mirror therapy in conjunction with FES is more effective for improving gait ability than mirror therapy alone.

The effects of Tai-Chi in conjunction with thera-band resistance exercise on functional fitness and muscle strength among community-based older people.

PubMed

Lin, Shu-Fen; Sung, Huei-Chuan; Li, Tzai-Li; Hsieh, Tsung-Cheng; Lan, Hsiao-Chin; Perng, Shoa-Jen; Smith, Graeme D

2015-05-01

The aim of this study was to investigate the effects of Tai-Chi in conjunction with thera-band resistance exercise on functional fitness and muscle strength in community-based older people. Tai-Chi is known to improve functional fitness in older people. Tai-Chi is usually performed with free hands without resistance training and usually focuses on training lower limbs. To date, no study has examined the use of Tai-Chi in conjunction with thera-band resistance exercise in this population. Cluster randomised trial design. Older people at six senior day care centres in Taiwan were assigned to thera-band resistance exercise or control group using a cluster randomisation. The thera-band resistance exercise group (n = 48) received sixty minute thera-band resistance exercise twice weekly for a period of 16 weeks. The control group (n = 47) underwent routine activities in the day care centre, receiving no Tai-Chi or resistance exercise. After receiving the thera-band resistance exercise, intervention participants displayed a significant increase in muscle strength of upper and lower extremities. Significant improvements were recorded on most measures of the Senior Fitness Test, with the exception of the chair-stand and back-scratch test. Thera-band resistance exercise has the potential to improve functional fitness and muscle strength in community-based older people. Thera-band resistance exercise potentially offers a safe and appropriate form of physical activity that nursing staff can easily incorporate into the daily routine of older people in day care centres, potentially improving functional performance and muscle strength. © 2015 John Wiley & Sons Ltd.

Ambulance smartphone tool for field triage of ruptured aortic aneurysms (FILTR): study protocol for a prospective observational validation of diagnostic accuracy.

PubMed

Lewis, Thomas L; Fothergill, Rachael T; Karthikesalingam, Alan

2016-10-24

Rupture of an abdominal aortic aneurysm (rAAA) carries a considerable mortality rate and is often fatal. rAAA can be treated through open or endovascular surgical intervention and it is possible that more rapid access to definitive intervention might be a key aspect of improving mortality for rAAA. Diagnosis is not always straightforward with up to 42% of rAAA initially misdiagnosed, introducing potentially harmful delay. There is a need for an effective clinical decision support tool for accurate prehospital diagnosis and triage to enable transfer to an appropriate centre. Prospective multicentre observational study assessing the diagnostic accuracy of a prehospital smartphone triage tool for detection of rAAA. The study will be conducted across London in conjunction with London Ambulance Service (LAS). A logistic score predicting the risk of rAAA by assessing ten key parameters was developed and retrospectively validated through logistic regression analysis of ambulance records and Hospital Episode Statistics data for 2200 patients from 2005 to 2010. The triage tool is integrated into a secure mobile app for major smartphone platforms. Key parameters collected from the app will be retrospectively matched with final hospital discharge diagnosis for each patient encounter. The primary outcome is to assess the sensitivity, specificity and positive predictive value of the rAAA triage tool logistic score in prospective use as a mob app for prehospital ambulance clinicians. Data collection started in November 2014 and the study will recruit a minimum of 1150 non-consecutive patients over a time period of 2 years. Full ethical approval has been gained for this study. The results of this study will be disseminated in peer-reviewed publications, and international/national presentations. CPMS 16459; pre-results. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Report: Congressional Request on EPA Enforcement Resources and Accomplishments

EPA Pesticide Factsheets

Report #2004-S-00001, October 10, 2003. Following September 11, 2001, EPA’s Office of Enforcement and Compliance Assurance (OECA) assumed additional duties in conjunction with nation-wide efforts to improve homeland security.

The Blooming Anatomy Tool (BAT): A discipline-specific rubric for utilizing Bloom's taxonomy in the design and evaluation of assessments in the anatomical sciences.

PubMed

Thompson, Andrew R; O'Loughlin, Valerie D

2015-01-01

Bloom's taxonomy is a resource commonly used to assess the cognitive level associated with course assignments and examination questions. Although widely utilized in educational research, Bloom's taxonomy has received limited attention as an analytical tool in the anatomical sciences. Building on previous research, the Blooming Anatomy Tool (BAT) was developed. This rubric provides discipline-specific guidelines to Blooming anatomy multiple-choice questions (MCQs). To test the efficacy of the BAT, a group of volunteers were randomly split up and asked to Bloom a series of anatomy MCQs using either the BAT or a traditional Bloom's reference called Bloom's Learning Objectives (BLO). Both groups utilized each rubric for a different series of MCQs. Examination question categorizations made using each rubric were tested for accuracy and interrater reliability. In addition, previous experience in anatomy and Bloom's taxonomy were considered. Results demonstrated that volunteers using the BAT had consistently higher levels of interrater reliability, but accuracy varied and was similar between rubrics. Neither measure was substantially impacted by experience in Bloom's taxonomy or anatomy. A poststudy survey indicated that volunteers strongly preferred the BAT and felt it was more helpful in categorizing anatomy MCQs than the BLO. These results suggest that the BAT can be useful in educational research in the anatomical sciences to aid in aligning observer judgment on Bloom taxonomic levels and improve consistency, especially when used in conjunction with a norming session prior to data collection. © 2014 American Association of Anatomists.

Improving Sight-Singing Performance in the Choral Ensemble: The Effect of Individual Testing.

ERIC Educational Resources Information Center

Demorest, Steven M.

1998-01-01

Examines the effect of individual testing in conjunction with group instruction on 306 students' sight-singing skills from beginning and advanced choirs of six high schools in Washington State. Reports that individual testing was found to be an effective means of improving individual sight-singing performance in group instructional situations.…

Jobs and Community Improvements--A Handbook for Enhanced Work Projects. Implementation Issues. Youth Knowledge Development Report 8.1.

ERIC Educational Resources Information Center

Corporation for Public/Private Ventures, Philadelphia, PA.

This volume is one of the products of the knowledge development activities mounted in conjunction with research, evaluation, and development activities funded under the Youth Employment and Demonstration Projects Act of 1977. Based on the Ventures in Community Improvement (VICI) "enhanced" job training/job placement approach, which used…

Total Probability of Collision as a Metric for Finite Conjunction Assessment and Collision Risk Management

NASA Astrophysics Data System (ADS)

Frigm, R.; Johnson, L.

The Probability of Collision (Pc) has become a universal metric and statement of on-orbit collision risk. Although several flavors of the computation exist and are well-documented in the literature, the basic calculation requires the same input: estimates for the position, position uncertainty, and sizes of the two objects involved. The Pc is used operationally to make decisions on whether a given conjunction poses significant collision risk to the primary object (or space asset of concern). It is also used to determine necessity and degree of mitigative action (typically in the form of an orbital maneuver) to be performed. The predicted post-maneuver Pc also informs the maneuver planning process into regarding the timing, direction, and magnitude of the maneuver needed to mitigate the collision risk. Although the data sources, techniques, decision calculus, and workflows vary for different agencies and organizations, they all have a common thread. The standard conjunction assessment and collision risk concept of operations (CONOPS) predicts conjunctions, assesses the collision risk (typically, via the Pc), and plans and executes avoidance activities for conjunctions as a discrete events. As the space debris environment continues to increase and improvements are made to remote sensing capabilities and sensitivities to detect, track, and predict smaller debris objects, the number of conjunctions will in turn continue to increase. The expected order-of-magnitude increase in the number of predicted conjunctions will challenge the paradigm of treating each conjunction as a discrete event. The challenge will not be limited to workload issues, such as manpower and computing performance, but also the ability for satellite owner/operators to successfully execute their mission while also managing on-orbit collision risk. Executing a propulsive maneuver occasionally can easily be absorbed into the mission planning and operations tempo; whereas, continuously planning evasive maneuvers for multiple conjunction events is time-consuming and would disrupt mission and science operations beyond what is tolerable. At the point when the number of conjunctions is so large that it is no longer possible to consider each individually, some sort of an amalgamation of events and risk must be considered. This shift is to one where each conjunction cannot be treated individually and the effects of all conjunctions within a given period of time must be considered together. This new paradigm is called finite Conjunction Assessment (CA) risk management. This paper considers the use of the Total Probability of Collision (TPc) as an analogous collision risk metric in the finite CA paradigm. TPc is expressed by the equation below and provides an aggregate probability of colliding with any one of the predicted conjunctions under consideration. TPc=1-?(1-Pc,i) While the TPc computation is straightforward and its physical meaning is understandable, the implications of its usage operationally requires a change in mindset and approach to collision risk management. This paper explores the necessary changes to evolve the basic CA and collision risk management CONOPS from discrete to finite CA, including aspects of collision risk assessment and collision risk mitigation. It proposes numerical and graphical decision aids to understand both the “risk outlook” for a given primary as well as mitigation options for the total collision risk. Both concepts make use of the TPc as a metric for finite collision risk management. Several operational scenarios are used to demonstrate the proposed concepts in practice.

Update on flashlamp pumped pulsed dye laser treatment for port wine stains (capillary malformation) patients

PubMed Central

Hsiao, Yen-Chang; Chang, Cheng-Jen

2011-01-01

Background and Aims: Currently, the method of choice for the treatment of port-wine stains is laser photocoagulation. Because of evolving treatment options, it is no longer enough for port-wine stains merely to be lightened through laser treatment. The best course of management consists of the most appropriate laser that will produce the most complete clearing of a lesion in the fewest treatment sessions with the least morbidity. The goal is generally accomplished with the use of yellow-light lasers. Materials (Subjects) and Methods: Absorption of laser energy by melanin causes localized heating in the epidermis, which may, if not controlled, produce permanent complications such as hypertrophic scarring or dyspigmentation. Refinements of the results can be achieved by using the flashlamp-pumped pulsed dye laser (FLPDL) in conjunction with the cryogen spray cooling (CSC) system. In our related studies, the infrared thermal image instrument is used for doctors in determining the optimum laser light dosage and preventing the side effects caused by FLPDL. Topic application of angiogenesis inhibitor (Imiquimod) in conjunction with pulsed dye laser treatment for the PWS patients has been assessed for improvement of FLPDL treatment. Results: We present the clinical effect of FLPDL, and the efficacy and safety of cooled laser treatment of PWS birthmarks. Our clinical outcome in the laser treatment of patients with PWS has been achieved to maximize thermal impact on targeted vessels, while minimizing adverse complications. Conclusions: CSC in conjunction with FLPDL can improve the treatment of PWS. The infrared image instrument is helpful for doctors in determining the optimum laser light dosage. Topic application of angiogenesis inhibitor (Imiquimod) in conjunction with laser treatment for the PWS patients is promising in the near future. PMID:24155536

Friction Stir Weld Tooling Development for Application on the 2195 Al-Cu-Li Space Transportation System External Tank

NASA Technical Reports Server (NTRS)

Loftus, Zachary; Arbegast, W. J.; Hartley, P. J.

1998-01-01

Friction Stir Welding (FSW) is a new and innovative solid-state joining process which can be applied to difficult-to- weld aluminum alloys. However, the large forces involved with the process have posed a production tooling challenge. Lockheed Martin Michoud Space Systems has overcome many of these challenges on the Super Lightweight External Tank (ET) program. Utilizing Aluminum-Copper-Lithium alloy 2195 in the form of plate and extrusions, investigations of FSW process parameters have been completed. Major loading mechanisms are discussed in conjunction with deflection measurements. Since the ET program is a cryogenic application, a brief comparison of cryogenic material properties with room temperature material properties is offered for both FSW and fusion welds. Finally, a new approach to controlling the FSW process from a load perspective is introduced. Emphasis will be put on tooling development, as well as the impact of tooling design and philosophy on Friction Stir Weld success probability.

Improved Methods of Producing and Administering Extracellular Vesicles | Poster

Cancer.gov

An efficient method of producing purified extracellular vesicles (EVs), in conjunction with a method that blocks liver macrophages from clearing EVs from the body, has produced promising results for the use of EVs in cancer therapy.

Healthy Indoor Environment Protocols for Home Energy Upgrades

EPA Pesticide Factsheets

This page contains the EPA-developed Healthy Indoor Environment Protocols for Home Energy Upgrades, a PDF guide that provides a set of best practices for improving indoor air quality in conjunction with energy upgrade work in homes.

Characterizing Longitude-Dependent Orbital Debris Congestion in the Geosynchronous Orbit Regime

NASA Astrophysics Data System (ADS)

Anderson, Paul V.

The geosynchronous orbit (GEO) is a unique commodity of the satellite industry that is becoming increasingly contaminated with orbital debris, but is heavily populated with high-value assets from the civil, commercial, and defense sectors. The GEO arena is home to hundreds of communications, data transmission, and intelligence satellites collectively insured for an estimated 18.3 billion USD. As the lack of natural cleansing mechanisms at the GEO altitude renders the lifetimes of GEO debris essentially infinite, conjunction and risk assessment must be performed to safeguard operational assets from debris collisions. In this thesis, longitude-dependent debris congestion is characterized by predicting the number of near-miss events per day for every longitude slot at GEO, using custom debris propagation tools and a torus intersection metric. Near-miss events with the present-day debris population are assigned risk levels based on GEO-relative position and speed, and this risk information is used to prioritize the population for debris removal target selection. Long-term projections of debris growth under nominal launch traffic, mitigation practices, and fragmentation events are also discussed, and latitudinal synchronization of the GEO debris population is explained via node variations arising from luni-solar gravity. In addition to characterizing localized debris congestion in the GEO ring, this thesis further investigates the conjunction risk to operational satellites or debris removal systems applying low-thrust propulsion to raise orbit altitude at end-of-life to a super-synchronous disposal orbit. Conjunction risks as a function of thrust level, miss distance, longitude, and semi-major axis are evaluated, and a guidance method for evading conjuncting debris with continuous thrust by means of a thrust heading change via single-shooting is developed.

Hermes III endpoint energy calculation from photonuclear activation of 197Au and 58Ni foils

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parzyck, Christopher Thomas

2014-09-01

A new process has been developed to characterize the endpoint energy of HERMES III on a shot-to-shot basis using standard dosimetry tools from the Sandia Radiation Measurements Laboratory. Photonuclear activation readings from nickel and gold foils are used in conjunction with calcium fluoride thermoluminescent dosimeters to derive estimated electron endpoint energies for a series of HERMES shots. The results are reasonably consistent with the expected endpoint voltages on those shots.

Video instrumentation for radionuclide angiocardiography.

NASA Technical Reports Server (NTRS)

Kriss, J. P.

1973-01-01

Two types of videoscintiscopes for performing radioisotopic angiocardiography with a scintillation camera are described, and use of these instruments in performing clinical studies is illustrated. Radionuclide angiocardiography is a simple, quick and accurate procedure recommended as a screening test for patients with a variety of congenital and acquired cardiovascular lesions. When performed in conjunction with coronary arterial catheterization, dynamic radionuclide angiography may provide useful information about regional myocardial perfusion. Quantitative capabilities greatly enhance the potential of this diagnostic tool.

A Low Cost Rad-Tolerant Standard Cell Library

NASA Technical Reports Server (NTRS)

Gambles, Jody W.; Maki, Gary K.

1997-01-01

This paper describes circuit design techniques developed at the NASA Institute of Advanced Microelectronics that have been shown to protect CMOS circuits from the deleterious effects of the natural space radiation environment. The IAuE is leading a program to incorporate these radiation-tolerance providing design techniques into a commercial standard cell library that will be used in conjunction with available Electronic Design Automation tools to produce space flight qualified microelectronics fabricated at modern commercial CMOS foundries.

Friction Stir Process Mapping Methodology

NASA Technical Reports Server (NTRS)

Kooney, Alex; Bjorkman, Gerry; Russell, Carolyn; Smelser, Jerry (Technical Monitor)

2002-01-01

In FSW (friction stir welding), the weld process performance for a given weld joint configuration and tool setup is summarized on a 2-D plot of RPM vs. IPM. A process envelope is drawn within the map to identify the range of acceptable welds. The sweet spot is selected as the nominal weld schedule. The nominal weld schedule is characterized in the expected manufacturing environment. The nominal weld schedule in conjunction with process control ensures a consistent and predictable weld performance.

Experience factors in performing periodic physical evaluations

NASA Technical Reports Server (NTRS)

Hoffman, A. A.

1969-01-01

The lack of scientific basis in the so-called periodic health examinations on military personnel inclusive of the Executive Health Program is outlined. This latter program can well represent a management tool of the company involved in addition to being a status symbol. A multiphasic screening technique is proposed in conjunction with an automated medical history questionnaire for preventive occupational medicine methodology. The need to collate early sickness consultation or clinic visit histories with screening techniques is emphasized.

Front lighted optical tooling method and apparatus

DOEpatents

Stone, W.J.

1983-06-30

An optical tooling method and apparatus uses a front lighted shadowgraphic technique to enhance visual contrast of reflected light. The apparatus includes an optical assembly including a fiducial mark, such as cross hairs, reflecting polarized light with a first polarization, a polarizing element backing the fiducial mark and a reflective surface backing the polarizing element for reflecting polarized light bypassing the fiducial mark and traveling through the polarizing element. The light reflected by the reflecting surface is directed through a second pass of the polarizing element toward the frontal direction with a polarization differing from the polarization of the light reflected by the fiducial mark. When used as a tooling target, the optical assembly may be mounted directly to a reference surface or may be secured in a mounting, such as a magnetic mounting. The optical assembly may also be mounted in a plane defining structure and used as a spherometer in conjunction with an optical depth measuring instrument.

CAROLS: a new airborne L-band radiometer for ocean surface and land observations.

PubMed

Zribi, Mehrez; Pardé, Mickael; Boutin, Jacquline; Fanise, Pascal; Hauser, Daniele; Dechambre, Monique; Kerr, Yann; Leduc-Leballeur, Marion; Reverdin, Gilles; Skou, Niels; Søbjærg, Sten; Albergel, Clement; Calvet, Jean Christophe; Wigneron, Jean Pierre; Lopez-Baeza, Ernesto; Rius, Antonio; Tenerelli, Joseph

2011-01-01

The "Cooperative Airborne Radiometer for Ocean and Land Studies" (CAROLS) L-Band radiometer was designed and built as a copy of the EMIRAD II radiometer constructed by the Technical University of Denmark team. It is a fully polarimetric and direct sampling correlation radiometer. It is installed on board a dedicated French ATR42 research aircraft, in conjunction with other airborne instruments (C-Band scatterometer-STORM, the GOLD-RTR GPS system, the infrared CIMEL radiometer and a visible wavelength camera). Following initial laboratory qualifications, three airborne campaigns involving 21 flights were carried out over South West France, the Valencia site and the Bay of Biscay (Atlantic Ocean) in 2007, 2008 and 2009, in coordination with in situ field campaigns. In order to validate the CAROLS data, various aircraft flight patterns and maneuvers were implemented, including straight horizontal flights, circular flights, wing and nose wags over the ocean. Analysis of the first two campaigns in 2007 and 2008 leads us to improve the CAROLS radiometer regarding isolation between channels and filter bandwidth. After implementation of these improvements, results show that the instrument is conforming to specification and is a useful tool for Soil Moisture and Ocean Salinity (SMOS) satellite validation as well as for specific studies on surface soil moisture or ocean salinity.

Episodic air quality impacts of plug-in electric vehicles

NASA Astrophysics Data System (ADS)

Razeghi, Ghazal; Carreras-Sospedra, Marc; Brown, Tim; Brouwer, Jack; Dabdub, Donald; Samuelsen, Scott

2016-07-01

In this paper, the Spatially and Temporally Resolved Energy and Environment Tool (STREET) is used in conjunction with University of California Irvine - California Institute of Technology (UCI-CIT) atmospheric chemistry and transport model to assess the impact of deploying plug-in electric vehicles and integrating wind energy into the electricity grid on urban air quality. STREET is used to generate emissions profiles associated with transportation and power generation sectors for different future cases. These profiles are then used as inputs to UCI-CIT to assess the impact of each case on urban air quality. The results show an overall improvement in 8-h averaged ozone and 24-h averaged particulate matter concentrations in the South Coast Air Basin (SoCAB) with localized increases in some cases. The most significant reductions occur northeast of the region where baseline concentrations are highest (up to 6 ppb decrease in 8-h-averaged ozone and 6 μg/m3 decrease in 24-h-averaged PM2.5). The results also indicate that, without integration of wind energy into the electricity grid, the temporal vehicle charging profile has very little to no effect on urban air quality. With the addition of wind energy to the grid mix, improvement in air quality is observed while charging at off-peak hours compared to the business as usual scenario.

Pediatric neuroanesthesia. Arteriovenous malformations.

PubMed

Newfield, P; Hamid, R K

2001-06-01

Intracranial arteriovenous malformations can occur singly, multiply, and in conjunction with aneurysms and denovo, family, or in conjunction with connective-tissue disorders. Intracranial hemorrhage is the most common presentation, occurring in 20% to 50% of cases. In children, seizures are the second most common presentation occurring in 15% to 20% of cases. The modalities available treatment of arteriovenous malformations are microsurgery, embolization, and stereotactic radiosurgery with heavy particles, alpha knife, or linear accelerator. Induction, maintenance, and emergence from anesthesia are designed to prevent rupture of arteriovenous malformation and aneurysm and to improve intracranial compliance in the presence of an intracranial hematoma, during both diagnostic (CT, MR scanning) and therapeutic procedures.

Constellation Mission Operation Working Group: ESMO Maneuver Planning Process Review

NASA Technical Reports Server (NTRS)

Moyer, Eric

2015-01-01

The Earth Science Mission Operation (ESMO) Project created an Independent Review Board to review our Conjunction Risk evaluation process and Maneuver Planning Process to identify improvements that safely manages mission conjunction risks, maintains ground track science requirements, and minimizes overall hours expended on High Interest Events (HIE). The Review Board is evaluating the current maneuver process which requires support by multiple groups. In the past year, there have been several changes to the processes although many prior and new concerns exist. This presentation will discuss maneuver process reviews and Board comments, ESMO assessment and path foward, ESMO future plans, recent changes and concerns.

JPRS Report, China

DTIC Science & Technology

1988-02-05

China has decided to use calf embryo transplants, in conjunction with artificial insemination , to improve meat and milk production from its native...oxen. Though artificial insemination will play the main role in improving herds, embryo transplants are also intended. Hybrids will play a key role...projects offering good returns; in reality, however, "trading" in funds is largely artificially restricted to "adjustments within the system

Professional Development, Capacity Building, and Research Needs: Critical Issues for Response to Intervention Implementation

ERIC Educational Resources Information Center

Danielson, Louis; Doolittle, Jennifer; Bradley, Renee

2007-01-01

The No Child Left Behind Act of 2001 in conjunction with the Individuals With Disabilities Education Act amendments of 2004 (IDEA) have created incentives to improve how K-12 instruction is provided and to improve the achievement of all students, including those with disabilities. To reach these goals, however, a thorough research base is needed,…

Improved Optics For Quasi-Elastic Light Scattering

NASA Technical Reports Server (NTRS)

Cheung, Harry Michael

1995-01-01

Improved optical train devised for use in light-scattering measurements of quasi-elastic light scattering (QELS) and laser spectroscopy. Measurements performed on solutions, microemulsions, micellular solutions, and colloidal dispersions. Simultaneous measurements of total intensity and fluctuations in total intensity of light scattered from sample at various angles provides data used, in conjunction with diffusion coefficients, to compute sizes of particles in sample.

Electrolytes with Improved Safety Developed for High Specific Energy Li-Ion Cells with Si-Based Anodes

NASA Technical Reports Server (NTRS)

Smart, M. C.; Krause, F. C.; Hwang, C.; Soler, J.; West, W. C.; Ratnakumar, B. V.; Prakash, G. K. S.

2012-01-01

A number of electrolyte formulations that have improved safety characteristics have been developed for use with high capacity silicon-based anodes. To improve the compatibility with Si-based anodes, a number of technical approaches have been employed, including: (1) the use of mono-fluoroethylene carbonate (FEC) in conjunction with, or in lieu of, ethylene carbonate (EC), (2) the use of high proportions of fluorinated co-solvents, (3) the use of vinylene carbonate (VC) to stabilize the Si/C electrode, and (4) the use of lithium bis(oxalato)borate (LiBOB) to improve the compatibility of the electrolyte when Si/C electrodes are used in conjunction with high voltage cathodes. Candidate electrolytes were studied in Li/Si-C and Si-C/ Li(MnNiCo)O2 (NMC) coin cells, as well as in larger Si-C/NMC three-electrode cells equipped with lithium reference electrodes. In summary, many electrolytes that contain triphenyl phosphate (TPP), which is used as a flame retardant additive up to concentrations of 15 volume percent, and possess FEC as a co-solvent have been demonstrated to outperform the all-carbonate baseline electrolytes when evaluated in Si-C/ Li(MnNiCo)O2 cells.

Incremental sanitation improvement strategy: comparison of options for Hanoi, Vietnam.

PubMed

Harada, H; Matsui, S; Dong, N T; Shimizu, Y; Fujii, S

2010-01-01

Urban sanitation issues should be tackled strategically, and may be addressed effectively when sewage development is pursued in conjunction with complementary sanitation measures. Five sanitation improvement scenarios employing sewage, night-soil collection-and-treatment (NSCT) system, and/or septic-tank improvement by annual dislodging were analyzed from the perspective of COD loads, total nitrogen loads, and cost under the conditions found in Hanoi, Vietnam. Compared to the development of sewage alone, the scenario of developing NSCT systems in a complementary manner with sewage development was estimated to be the most effective for a rapid decrease of both COD and total nitrogen loads. However, it may be difficult in some cases to replace ordinary water-flush toilet by the micro-flush toilet that are used in NSCT systems. In this case, the scenario employing septic-tank improvement in conjunction with sewage development may be effective for a rapid decrease of COD in locations where septic tanks are widely used under poor maintenance conditions and nitrogen pollution is not serious compared to COD. It was calculated that the two scenarios above would respectively require cost increases of 16 and 22% over the sewage development scenario.

Incremental improvements to the trout S9 biotransformation assay

EPA Science Inventory

In vitro substrate depletion methods have been used in conjunction with computational models to predict biotransformation impacts on chemical accumulation by fish. There is a consistent trend, however, toward overestimation of measured chemical residues resulting from controlled...

Microgravity

NASA Image and Video Library

1996-01-01

The Ring Flame Stabilizer has been developed in conjunction with Lewis Research Center. This device can lower pollutant emissions (which contribute to smog and air pollution) from natural-gas appliances such as furnaces and water heaters by 90 percent while improving energy efficiency by 2 percent.

Follicular Conjunctivitis due to Chlamydia felis-Case Report, Review of the Literature and Improved Molecular Diagnostics.

PubMed

Wons, Juliana; Meiller, Ralph; Bergua, Antonio; Bogdan, Christian; Geißdörfer, Walter

2017-01-01

A 29-year-old woman presented with unilateral, chronic follicular conjunctivitis since 6 weeks. While the conjunctival swab taken from the patient's eye was negative in a Chlamydia (C.) trachomatis -specific PCR, C. felis was identified as etiological agent using a pan- Chlamydia TaqMan-PCR followed by sequence analysis. A pet kitten of the patient was found to be the source of infection, as its conjunctival and pharyngeal swabs were also positive for C. felis . The patient was successfully treated with systemic doxycycline. This report, which presents one of the few documented cases of human C. felis infection, illustrates that standard PCR tests are designed to detect the most frequently seen species of a bacterial genus but might fail to be reactive with less common species. We developed a modified pan- Chlamydia / C. felis duplex TaqMan-PCR assay that detects C. felis without the need of subsequent sequencing. The role of chlamydiae-specific serum antibody titers for the diagnosis of follicular conjunctivitis is discussed.

Effectiveness of a Low-Cost, Graduate Student–Led Intervention on Study Habits and Performance in Introductory Biology

PubMed Central

Hoskins, Tyler D.; Gantz, J. D.; Chaffee, Blake R.; Arlinghaus, Kel; Wiebler, James; Hughes, Michael; Fernandes, Joyce J.

2017-01-01

Institutions have developed diverse approaches that vary in effectiveness and cost to improve student performance in introductory science, technology, engineering, and mathematics courses. We developed a low-cost, graduate student–led, metacognition-based study skills course taught in conjunction with the introductory biology series at Miami University. Our approach aimed to improve performance for underachieving students by combining an existing framework for the process of learning (the study cycle) with concrete tools (outlines and concept maps) that have been shown to encourage deep understanding. To assess the effectiveness of our efforts, we asked 1) how effective our voluntary recruitment model was at enrolling the target cohort, 2) how the course impacted performance on lecture exams, 3) how the course impacted study habits and techniques, and 4) whether there are particular study habits or techniques that are associated with large improvements on exam scores. Voluntary recruitment attracted only 11–17% of our target cohort. While focal students improved on lecture exams relative to their peers who did not enroll, gains were relatively modest, and not all students improved. Further, although students across both semesters of our study reported improved study habits (based on pre and post surveys) and on outlines and concept maps (based on retrospectively scored assignments), gains were more dramatic in the Fall semester. Multivariate models revealed that, while changes in study habits and in the quality of outlines and concept maps were weakly associated with change in performance on lecture exams, relationships were only significant in the Fall semester and were sometimes counterintuitive. Although benefits of the course were offset somewhat by the inefficiency of voluntary recruitment, we demonstrate the effectiveness our course, which is inexpensive to implement and has advantage of providing pedagogical experience to future educators. PMID:28747353

A Systematic Review on the Use of Psychosocial Interventions in Conjunction With Medications for the Treatment of Opioid Addiction.

PubMed

Dugosh, Karen; Abraham, Amanda; Seymour, Brittany; McLoyd, Keli; Chalk, Mady; Festinger, David

2016-01-01

Opioid use and overdose rates have risen to epidemic levels in the United States during the past decade. Fortunately, there are effective medications (ie, methadone, buprenorphine, and oral and injectable naltrexone) available for the treatment of opioid addiction. Each of these medications is approved for use in conjunction with psychosocial treatment; however, there is a dearth of empirical research on the optimal psychosocial interventions to use with these medications. In this systematic review, we outline and discuss the findings of 3 prominent prior reviews and 27 recent publications of empirical studies on this topic. The most widely studied psychosocial interventions examined in conjunction with medications for opioid addiction were contingency management and cognitive behavioral therapy, with the majority focusing on methadone treatment. The results generally support the efficacy of providing psychosocial interventions in combination with medications to treat opioid addictions, although the incremental utility varied across studies, outcomes, medications, and interventions. The review highlights significant gaps in the literature and provides areas for future research. Given the enormity of the current opioid problem in the United States, it is critical to gain a better understanding of the most effective ways to deliver psychosocial treatments in conjunction with these medications to improve the health and well-being of individuals suffering from opioid addiction.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Drouhard, Margaret MEG G; Steed, Chad A; Hahn, Steven E

In this paper, we propose strategies and objectives for immersive data visualization with applications in materials science using the Oculus Rift virtual reality headset. We provide background on currently available analysis tools for neutron scattering data and other large-scale materials science projects. In the context of the current challenges facing scientists, we discuss immersive virtual reality visualization as a potentially powerful solution. We introduce a prototype immersive visual- ization system, developed in conjunction with materials scientists at the Spallation Neutron Source, which we have used to explore large crystal structures and neutron scattering data. Finally, we offer our perspective onmore » the greatest challenges that must be addressed to build effective and intuitive virtual reality analysis tools that will be useful for scientists in a wide range of fields.« less

77 FR 23543 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-19

...As required by the Privacy Act of 1974 (5 U.S.C. 552a(e)(4), (11)), notice is hereby given that the Department of Veterans Affairs (VA) is amending the system of records entitled ``Veterans Tracking Application (VTA).'' VA is amending the system of records by revising the System Name to ``Veterans Tracking Application (VTA)/Federal Case Management Tool (FCMT)'' and System Location to include the ``Federal Case Management Tool (FCMT).'' The VTA data will also be accessed using the FCMT. Further, the Routine Uses have been updated in conjunction with VA's Virtual Lifetime Electronic Record (VLER), to reflect the nature of electronic coordination that will fully support the users of this application. VA is republishing the system notice in its entirety.

Identifying approaches for assessing methodological and reporting quality of systematic reviews: a descriptive study.

PubMed

Pussegoda, Kusala; Turner, Lucy; Garritty, Chantelle; Mayhew, Alain; Skidmore, Becky; Stevens, Adrienne; Boutron, Isabelle; Sarkis-Onofre, Rafael; Bjerre, Lise M; Hróbjartsson, Asbjørn; Altman, Douglas G; Moher, David

2017-06-19

The methodological quality and completeness of reporting of the systematic reviews (SRs) is fundamental to optimal implementation of evidence-based health care and the reduction of research waste. Methods exist to appraise SRs yet little is known about how they are used in SRs or where there are potential gaps in research best-practice guidance materials. The aims of this study are to identify reports assessing the methodological quality (MQ) and/or reporting quality (RQ) of a cohort of SRs and to assess their number, general characteristics, and approaches to 'quality' assessment over time. The Cochrane Library, MEDLINE®, and EMBASE® were searched from January 1990 to October 16, 2014, for reports assessing MQ and/or RQ of SRs. Title, abstract, and full-text screening of all reports were conducted independently by two reviewers. Reports assessing the MQ and/or RQ of a cohort of ten or more SRs of interventions were included. All results are reported as frequencies and percentages of reports. Of 20,765 unique records retrieved, 1189 of them were reviewed for full-text review, of which 76 reports were included. Eight previously published approaches to assessing MQ or reporting guidelines used as proxy to assess RQ were used in 80% (61/76) of identified reports. These included two reporting guidelines (PRISMA and QUOROM) and five quality assessment tools (AMSTAR, R-AMSTAR, OQAQ, Mulrow, Sacks) and GRADE criteria. The remaining 24% (18/76) of reports developed their own criteria. PRISMA, OQAQ, and AMSTAR were the most commonly used published tools to assess MQ or RQ. In conjunction with other approaches, published tools were used in 29% (22/76) of reports, with 36% (8/22) assessing adherence to both PRISMA and AMSTAR criteria and 26% (6/22) using QUOROM and OQAQ. The methods used to assess quality of SRs are diverse, and none has become universally accepted. The most commonly used quality assessment tools are AMSTAR, OQAQ, and PRISMA. As new tools and guidelines are developed to improve both the MQ and RQ of SRs, authors of methodological studies are encouraged to put thoughtful consideration into the use of appropriate tools to assess quality and reporting.

Magnetic navigation and catheter ablation of right atrial ectopic tachycardia in the presence of a hemi-azygos continuation: a magnetic navigation case using 3D electroanatomical mapping.

PubMed

Ernst, Sabine; Chun, Julian K R; Koektuerk, Buelent; Kuck, Karl-Heinz

2009-01-01

We report on a 63-year-old female patient in whom an electrophysiologic study discovered a hemi-azygos continuation. Using the magnetic navigation system, remote-controlled ablation was performed in conjunction with the 3D electroanatomical mapping system. Failing the attempt to advance a diagnostic catheter from the femoral vein, a diagnostic catheter was advanced via the left subclavian vein into the coronary sinus. The soft magnetic catheter was positioned in the right atrium via the hemi-azygos vein, and 3D mapping demonstrated an ectopic atrial tachycardia. Successful ablation was performed entirely remote controlled. Fluoroscopy time was only 7.1 minutes, of which 45 seconds were required during remote navigation. Remote-controlled catheter ablation using magnetic navigation in conjunction with the electroanatomical mapping system proved to be a valuable tool to perform successful ablation in the presence of a hemi-azygos continuation.

Point-of-care optical tool to detect early stage of hemorrhage and shock

NASA Astrophysics Data System (ADS)

Gurjar, Rajan S.; Riccardi, Suzannah L.; Johnson, Blair D.; Johnson, Christopher P.; Paradis, Norman A.; Joyner, Michael J.; Wolf, David E.

2014-02-01

There is a critical unmet clinical need for a device that can monitor and predict the onset of shock: hemorrhagic shock or bleeding to death, septic shock or systemic infection, and cardiogenic shock or blood flow and tissue oxygenation impairment due to heart attack. Together these represent 141 M patients per year. We have developed a monitor for shock based on measuring blood flow in peripheral (skin) capillary beds using diffuse correlation spectroscopy, a form of dynamic light scattering, and have demonstrated proof-of-principle both in pigs and humans. Our results show that skin blood flow measurement, either alone or in conjunction with other hemodynamic properties such as heart rate variability, pulse pressure variability, and tissue oxygenation, can meet this unmet need in a small self-contained patch-like device in conjunction with a hand-held processing unit. In this paper we describe and discuss the experimental work and the multivariate statistical analysis performed to demonstrate proof-of-principle of the concept.

The critical steps for successful research: The research proposal and scientific writing: (A report on the pre-conference workshop held in conjunction with the 64(th) annual conference of the Indian Pharmaceutical Congress-2012).

PubMed

Balakumar, Pitchai; Inamdar, Mohammed Naseeruddin; Jagadeesh, Gowraganahalli

2013-04-01

An interactive workshop on 'The Critical Steps for Successful Research: The Research Proposal and Scientific Writing' was conducted in conjunction with the 64(th) Annual Conference of the Indian Pharmaceutical Congress-2012 at Chennai, India. In essence, research is performed to enlighten our understanding of a contemporary issue relevant to the needs of society. To accomplish this, a researcher begins search for a novel topic based on purpose, creativity, critical thinking, and logic. This leads to the fundamental pieces of the research endeavor: Question, objective, hypothesis, experimental tools to test the hypothesis, methodology, and data analysis. When correctly performed, research should produce new knowledge. The four cornerstones of good research are the well-formulated protocol or proposal that is well executed, analyzed, discussed and concluded. This recent workshop educated researchers in the critical steps involved in the development of a scientific idea to its successful execution and eventual publication.

Dependency between removal characteristics and defined measurement categories of pellets

NASA Astrophysics Data System (ADS)

Vogt, C.; Rohrbacher, M.; Rascher, R.; Sinzinger, S.

2015-09-01

Optical surfaces are usually machined by grinding and polishing. To achieve short polishing times it is necessary to grind with best possible form accuracy and with low sub surface damages. This is possible by using very fine grained grinding tools for the finishing process. These however often show time dependent properties regarding cutting ability in conjunction with tool wear. Fine grinding tools in the optics are often pellet-tools. For a successful grinding process the tools must show a constant self-sharpening performance. A constant, at least predictable wear and cutting behavior is crucial for a deterministic machining. This work describes a method to determine the characteristics of pellet grinding tools by tests conducted with a single pellet. We investigate the determination of the effective material removal rate and the derivation of the G-ratio. Especially the change from the newly dressed via the quasi-stationary to the worn status of the tool is described. By recording the achieved roughness with the single pellet it is possible to derive the roughness expect from a series pellet tool made of pellets with the same specification. From the results of these tests the usability of a pellet grinding tool for a specific grinding task can be determined without testing a comparably expensive serial tool. The results are verified by a production test with a serial tool under series conditions. The collected data can be stored and used in an appropriate data base for tool characteristics and be combined with useful applications.

Patient specific optimization-based treatment planning for catheter-based ultrasound hyperthermia and thermal ablation

NASA Astrophysics Data System (ADS)

Prakash, Punit; Chen, Xin; Wootton, Jeffery; Pouliot, Jean; Hsu, I.-Chow; Diederich, Chris J.

2009-02-01

A 3D optimization-based thermal treatment planning platform has been developed for the application of catheter-based ultrasound hyperthermia in conjunction with high dose rate (HDR) brachytherapy for treating advanced pelvic tumors. Optimal selection of applied power levels to each independently controlled transducer segment can be used to conform and maximize therapeutic heating and thermal dose coverage to the target region, providing significant advantages over current hyperthermia technology and improving treatment response. Critical anatomic structures, clinical target outlines, and implant/applicator geometries were acquired from sequential multi-slice 2D images obtained from HDR treatment planning and used to reconstruct patient specific 3D biothermal models. A constrained optimization algorithm was devised and integrated within a finite element thermal solver to determine a priori the optimal applied power levels and the resulting 3D temperature distributions such that therapeutic heating is maximized within the target, while placing constraints on maximum tissue temperature and thermal exposure of surrounding non-targeted tissue. This optimizationbased treatment planning and modeling system was applied on representative cases of clinical implants for HDR treatment of cervix and prostate to evaluate the utility of this planning approach. The planning provided significant improvement in achievable temperature distributions for all cases, with substantial increase in T90 and thermal dose (CEM43T90) coverage to the hyperthermia target volume while decreasing maximum treatment temperature and reducing thermal dose exposure to surrounding non-targeted tissues and thermally sensitive rectum and bladder. This optimization based treatment planning platform with catheter-based ultrasound applicators is a useful tool that has potential to significantly improve the delivery of hyperthermia in conjunction with HDR brachytherapy. The planning platform has been extended to model thermal ablation, including the addition of temperature dependent attenuation, perfusion, and tissue damage. Pilot point control at the target boundaries was implemented to control power delivery to each transducer section, simulating an approach feasible for MR guided procedures. The computer model of thermal ablation was evaluated on representative patient anatomies to demonstrate the feasibility of using catheter-based ultrasound thermal ablation for treatment of benign prostate hyperplasia (BPH) and prostate cancer, and to assist in designing applicators and treatment delivery strategies.

The determination of the post-Newtonian parameter γ during the cruise phase of BepiColombo

NASA Astrophysics Data System (ADS)

Imperi, Luigi; Iess, Luciano

2017-04-01

The post-Newtonian parameter γ, unity in general relativity, controls the delay and the deflection of photons induced by the space-time curvature produced by any mass. A precise determination of this parameter can be attained by exploiting the Shapiro time delay and the corresponding Doppler shift affecting the propagation of radio signals between a ground antenna and a spacecraft near a superior solar conjunction. In its cruise phase to Mercury (from October 2018 to December 2025), the spacecraft BepiColombo will experience eleven superior solar conjunctions, thus offering an excellent opportunity to test general relativity. The experiment will benefit from very accurate range and Doppler measurements, enabled by a multi-frequency radio link in X and Ka bands (8 and 34 GHz) and a high rate (24 Mcps) pseudo-noise ranging code. The multi-frequency link configuration allows the suppression of the plasma noise due to the solar corona. In this paper, we report the results of a comprehensive analysis based on the latest spacecraft trajectory and numerical simulations. The ultimate accuracies will be determined by operational constraints, number of exploitable conjunctions, and dynamical noise acting on the spacecraft. We find that γ can be determined up to 6.2× {{10}-6} with just one conjunction in July 2022, thus improving by a factor of 4 the result obtained by the Cassini mission in 2002. This accuracy can be further increased by selecting a limited number of favourable superior solar conjunctions, down to 2.5× {{10}-6} when all of them are combined.

Jane: a new tool for the cophylogeny reconstruction problem.

PubMed

Conow, Chris; Fielder, Daniel; Ovadia, Yaniv; Libeskind-Hadas, Ran

2010-02-03

This paper describes the theory and implementation of a new software tool, called Jane, for the study of historical associations. This problem arises in parasitology (associations of hosts and parasites), molecular systematics (associations of orderings and genes), and biogeography (associations of regions and orderings). The underlying problem is that of reconciling pairs of trees subject to biologically plausible events and costs associated with these events. Existing software tools for this problem have strengths and limitations, and the new Jane tool described here provides functionality that complements existing tools. The Jane software tool uses a polynomial time dynamic programming algorithm in conjunction with a genetic algorithm to find very good, and often optimal, solutions even for relatively large pairs of trees. The tool allows the user to provide rich timing information on both the host and parasite trees. In addition the user can limit host switch distance and specify multiple host switch costs by specifying regions in the host tree and costs for host switches between pairs of regions. Jane also provides a graphical user interface that allows the user to interactively experiment with modifications to the solutions found by the program. Jane is shown to be a useful tool for cophylogenetic reconstruction. Its functionality complements existing tools and it is therefore likely to be of use to researchers in the areas of parasitology, molecular systematics, and biogeography.

Ring Flame Stabilizer

NASA Technical Reports Server (NTRS)

1996-01-01

The Ring Flame Stabilizer has been developed in conjunction with Lewis Research Center. This device can lower pollutant emissions (which contribute to smog and air pollution) from natural-gas appliances such as furnaces and water heaters by 90 percent while improving energy efficiency by 2 percent.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beauchamp, R.O. Jr.

A preliminary examination of chemical-substructure analysis (CSA) demonstrates the effective use of the Chemical Abstracts compound connectivity file in conjunction with the bibliographic file for relating chemical structures to biological activity. The importance of considering the role of metabolic intermediates under a variety of conditions is illustrated, suggesting structures that should be examined that may exhibit potential activity. This CSA technique, which utilizes existing large files accessible with online personal computers, is recommended for use as another tool in examining chemicals in drugs. 2 refs., 4 figs.

Image masking using polygon fills and morphological transformations

NASA Technical Reports Server (NTRS)

Simpson, James J.

1992-01-01

Polygon-fill operations and morphological transformations are effective computational tools for the land-masking and coastline-correction preprocessing operations often applied to AVHRR data prior to oceanographic applications. These masking operations, in conjunction with cloud-screening techniques, can be used on such other oceanographically significant remote-sensing data as those of the Coastal Zone Color Scanner, GOES, and Landsat. The sensitivity of the methods to regional variations in atmospheric conditions and land-ocean temperature gradients is assessed for tropical, midlatitude, and high latitude regions.

Fracture detection logging tool

DOEpatents

Benzing, William M.

1992-06-09

A method and apparatus by which fractured rock formations are identified and their orientation may be determined includes two orthogonal motion sensors which are used in conjunction with a downhole orbital vibrator. The downhole vibrator includes a device for orienting the sensors. The output of the sensors is displayed as a lissajou figure. The shape of the figure changes when a subsurface fracture is encountered in the borehole. The apparatus and method identifies fractures rock formations and enables the azimuthal orientation of the fractures to be determined.

Identifying sediment sources in the sediment TMDL process

USGS Publications Warehouse

Gellis, Allen C.; Fitzpatrick, Faith A.; Schubauer-Berigan, Joseph P.; Landy, R.B.; Gorman Sanisaca, Lillian E.

2015-01-01

Sediment is an important pollutant contributing to aquatic-habitat degradation in many waterways of the United States. This paper discusses the application of sediment budgets in conjunction with sediment fingerprinting as tools to determine the sources of sediment in impaired waterways. These approaches complement monitoring, assessment, and modeling of sediment erosion, transport, and storage in watersheds. Combining the sediment fingerprinting and sediment budget approaches can help determine specific adaptive management plans and techniques applied to targeting hot spots or areas of high erosion.

An Updated Process for Automated Deepspace Conjunction Assessment

NASA Technical Reports Server (NTRS)

Tarzi, Zahi B.; Berry, David S.; Roncoli, Ralph B.

2015-01-01

There is currently a high level of interest in the areas of conjunction assessment and collision avoidance from organizations conducting space operations. Current conjunction assessment activity is mainly focused on spacecraft and debris in the Earth orbital environment [1]. However, collisions are possible in other orbital environments as well [2]. This paper will focus on the current operations of and recent updates to the Multimission Automated Deep Space Conjunction Assessment Process (MADCAP) used at the Jet Propulsion Laboratory for NASA to perform conjunction assessment at Mars and the Moon. Various space agencies have satellites in orbit at Mars and the Moon with additional future missions planned. The consequences of collisions are catastrophically high. Intuitive notions predict low probability of collisions in these sparsely populated environments, but may be inaccurate due to several factors. Orbits of scientific interest often tend to have similar characteristics as do the orbits of spacecraft that provide a communications relay for surface missions. The MADCAP process is controlled by an automated scheduler which initializes analysis based on a set timetable or the appearance of new ephemeris files either locally or on the Deep Space Network (DSN) Portal. The process then generates and communicates reports which are used to facilitate collision avoidance decisions. The paper also describes the operational experience and utilization of the automated tool during periods of high activity and interest such as: the close approaches of NASA's Lunar Atmosphere & Dust Environment Explorer (LADEE) and Lunar Reconnaissance Orbiter (LRO) during the LADEE mission. In addition, special consideration was required for the treatment of missions with rapidly varying orbits and less reliable long term downtrack estimates; in particular this was necessitated by perturbations to MAVEN's orbit induced by the Martian atmosphere. The application of special techniques to non-operational spacecraft with large uncertainties is also studied. Areas for future work are also described. Although the applications discussed in this paper are in the Martian and Lunar environments, the techniques are not unique to these bodies and could be applied to other orbital environments.

Evaluation of grid generation technologies from an applied perspective

NASA Technical Reports Server (NTRS)

Hufford, Gary S.; Harrand, Vincent J.; Patel, Bhavin C.; Mitchell, Curtis R.

1995-01-01

An analysis of the grid generation process from the point of view of an applied CFD engineer is given. Issues addressed include geometric modeling, structured grid generation, unstructured grid generation, hybrid grid generation and use of virtual parts libraries in large parametric analysis projects. The analysis is geared towards comparing the effective turn around time for specific grid generation and CFD projects. The conclusion was made that a single grid generation methodology is not universally suited for all CFD applications due to both limitations in grid generation and flow solver technology. A new geometric modeling and grid generation tool, CFD-GEOM, is introduced to effectively integrate the geometric modeling process to the various grid generation methodologies including structured, unstructured, and hybrid procedures. The full integration of the geometric modeling and grid generation allows implementation of extremely efficient updating procedures, a necessary requirement for large parametric analysis projects. The concept of using virtual parts libraries in conjunction with hybrid grids for large parametric analysis projects is also introduced to improve the efficiency of the applied CFD engineer.

Raspberry Shake- A World-Wide Citizen Seismograph Network

NASA Astrophysics Data System (ADS)

Christensen, B. C.; Blanco Chia, J. F.

2017-12-01

Raspberry Shake was conceived as an inexpensive plug-and-play solution to satisfy the need for universal, quick and accurate earthquake detections. First launched on Kickstarter's crowdfunding platform in July of 2016, the Raspberry Shake project was funded within hours of the launch date and, by the end of the campaign, reached more than 1000% of its initial funding goal. This demonstrated for the first time that there exists a strong interest among Makers, Hobbyists and Do It Yourselfers for personal seismographs. From here, a citizen scientist network was created and it has steadily been growing. The Raspberry Shake network is currently being used in conjunction with publicly available broadband data from the GSN and other state-run seismic networks available through the IRIS, Geoscope and GEOFON data centers to detect and locate earthquakes large and small around the globe. Raspberry Shake looks well positioned to improve local monitoring of earthquakes on a global scale, deepen community's understanding of earthquakes, and serve as a formidable teaching tool. We present the main results of the project, the current state of the network, and the new Raspberry Shake models that are being built.

Magnetic Separation Methods for the Detection of Mycobacterium avium subsp. paratuberculosis in Various Types of Matrices: A Review

PubMed Central

Dziedzinska, Radka

2017-01-01

The main reasons to improve the detection of Mycobacterium avium subsp. paratuberculosis (MAP) are animal health and monitoring of MAP entering the food chain via meat, milk, and/or dairy products. Different approaches can be used for the detection of MAP, but the use of magnetic separation especially in conjunction with PCR as an end-point detection method has risen in past years. However, the extraction of DNA which is a crucial step prior to PCR detection can be complicated due to the presence of inhibitory substances. Magnetic separation methods involving either antibodies or peptides represent a powerful tool for selective separation of target bacteria from other nontarget microorganisms and inhibitory sample components. These methods enable the concentration of pathogens present in the initial matrix into smaller volume and facilitate the isolation of sufficient quantities of pure DNA. The purpose of this review was to summarize the methods based on the magnetic separation approach that are currently available for the detection of MAP in a broad range of matrices. PMID:28642876

The International Space Station Evolution Data Book: An Overview and Status

NASA Technical Reports Server (NTRS)

Antol, Jeffrey; Jorgensen, Catherine A.

1999-01-01

The evolution and enhancement of the International Space Station (ISS) is currently being planned in conjunction with the on-orbit construction of the baseline configuration. Three principal areas have been identified that will contribute to the evolution of ISS: Pre-Planned Program Improvement (P3I), Utilization & Commercialization, and Human Exploration and Development of Space (HEDS) missions. The ISS Evolution Strategy, under development by the Spacecraft and Sensors Branch of NASA Langley Research Center, seeks to coordinate the P3I technology development with Commercialization/Utilization activities and HEDS advanced mission accommodation to provide synergistic technology developments for all three areas. The focal point of this proposed strategy is the ISS Evolution Data Book (EDB), a tool for aiding the evolution and enhancement of ISS beyond Assembly Complete. This paper will discuss the strategy and provide an overview of the EDB, describing the contents of each section. It will also discuss potential applications of the EDB and present an example Design Reference Mission (DRM). The latest status of the EDB and the plans for completing and enhancing the book will also be summarized.

PaPrBaG: A machine learning approach for the detection of novel pathogens from NGS data

NASA Astrophysics Data System (ADS)

Deneke, Carlus; Rentzsch, Robert; Renard, Bernhard Y.

2017-01-01

The reliable detection of novel bacterial pathogens from next-generation sequencing data is a key challenge for microbial diagnostics. Current computational tools usually rely on sequence similarity and often fail to detect novel species when closely related genomes are unavailable or missing from the reference database. Here we present the machine learning based approach PaPrBaG (Pathogenicity Prediction for Bacterial Genomes). PaPrBaG overcomes genetic divergence by training on a wide range of species with known pathogenicity phenotype. To that end we compiled a comprehensive list of pathogenic and non-pathogenic bacteria with human host, using various genome metadata in conjunction with a rule-based protocol. A detailed comparative study reveals that PaPrBaG has several advantages over sequence similarity approaches. Most importantly, it always provides a prediction whereas other approaches discard a large number of sequencing reads with low similarity to currently known reference genomes. Furthermore, PaPrBaG remains reliable even at very low genomic coverages. CombiningPaPrBaG with existing approaches further improves prediction results.

Jet Noise Modeling for Supersonic Business Jet Application

NASA Technical Reports Server (NTRS)

Stone, James R.; Krejsa, Eugene A.; Clark, Bruce J.

2004-01-01

This document describes the development of an improved predictive model for coannular jet noise, including noise suppression modifications applicable to small supersonic-cruise aircraft such as the Supersonic Business Jet (SBJ), for NASA Langley Research Center (LaRC). For such aircraft a wide range of propulsion and integration options are under consideration. Thus there is a need for very versatile design tools, including a noise prediction model. The approach used is similar to that used with great success by the Modern Technologies Corporation (MTC) in developing a noise prediction model for two-dimensional mixer ejector (2DME) nozzles under the High Speed Research Program and in developing a more recent model for coannular nozzles over a wide range of conditions. If highly suppressed configurations are ultimately required, the 2DME model is expected to provide reasonable prediction for these smaller scales, although this has not been demonstrated. It is considered likely that more modest suppression approaches, such as dual stream nozzles featuring chevron or chute suppressors, perhaps in conjunction with inverted velocity profiles (IVP), will be sufficient for the SBJ.

Fabrication Infrastructure to Enable Efficient Exploration and Utilization of Space

NASA Technical Reports Server (NTRS)

Howell, Joe T.; Fikes, John C.; McLemore, Carole A.; Manning, Curtis W.; Good, Jim

2007-01-01

Unlike past one-at-a-time mission approaches, system-of-systems infrastructures will be needed to enable ambitious scenarios for sustainable future space exploration and utilization. Fabrication infrastructure will be needed to support habitat structure development, tools and mechanical part fabrication, as well as repair and replacement of ground support and space mission hardware such as life support items, vehicle components and crew systems. The fabrication infrastructure will need the In Situ Fabrication and Repair (ISFR) element, which is working in conjunction with the In Situ Resources Utilization (ISRU) element, to live off the land. The ISFR Element supports the entire life cycle of Exploration by: reducing downtime due to failed components; decreasing risk to crew by recovering quickly from degraded operation of equipment; improving system functionality with advanced geometry capabilities; and enhancing mission safety by reducing assembly part counts of original designs where possible. This paper addresses the fabrication infrastructures that support efficient, affordable, reliable infrastructures for both space exploration systems and logistics; these infrastructures allow sustained, affordable and highly effective operations on the Moon, Mars and beyond.

Measurement of Peroxyacetyl Nitrate (PAN), Peroxypropionyl Nitrate (PPN) and Peroxymethacryloyl Nitrate (MPAN) during TRACE-P

NASA Technical Reports Server (NTRS)

Flocke, Frank; Weinheimer, Andrew J.

2003-01-01

In Fall 2000, the PANs gas chromatograph (GC) was improved and prepared for installation on the NASA P-3. A number of experiments were conducted in conjunction with the NCAR NO,, instrument (B. Ridley) to settle some of the fine details of the output of the calibration system for each instrument. In addition, the sampling frequency was improved.

Improving Conference Skills Through the CCS.

ERIC Educational Resources Information Center

Wilen, William W.; Kindsvatter, Richard

1982-01-01

Presents a Conference Category System (CCS) which will help social studies supervisors develop the skills necessary to conduct a conference effectively. The CCS can be applied using either a shared-analysis or self-analysis approach in conjunction with a video or audio-tape recorder. (RM)

Pharmacological Interventions for Students with ADD.

ERIC Educational Resources Information Center

Austin, Vance L.

2003-01-01

A review of the research on pharmacological interventions for students with attention deficit disorder finds that psychostimulants such as methylphenidate (Ritalin) are effective in improving focus and impulse control, but should be used in conjunction with psychosocial and behavioral interventions. Comprehensive medical screenings and guidelines…

Improved design of electrophoretic equipment for rapid sickle-cell-anemia screening

NASA Technical Reports Server (NTRS)

Reddick, J. M.; Hirsch, I.

1974-01-01

Effective mass screening may be accomplished by modifying existing electrophoretic equipment in conjunction with multisample applicator used with cellulose-acetate-matrix test paper. Using this method, approximately 20 to 25 samples can undergo electrophoresis in 5 to 6 minutes.

Driver response to delineation treatments on horizontal curves on two-lane roads.

DOT National Transportation Integrated Search

2009-05-01

The delineation of horizontal curves on two-lane rural roads is an important component of safety : improvements to reduce run-off-road and head-on crashes. This project assessed four types of vertical : delineation in conjunction with edgeline markin...

METAL SURFACE TREATMENT

DOEpatents

Eubank, L.D.

1958-08-12

Improved flux baths are described for use in conjunction with hot dipped coatings for uranium. The flux bath consists of molten alkali metal, or alkaline earth metal halides. One preferred embodiment comprises a bath containing molten KCl, NaCl, and LiCl in proportions approximating the triple eutectic.

Performance of the image statistics decoder in conjunction with the Goldstone-VLA array

NASA Technical Reports Server (NTRS)

Wang, H. C.; Pitt, G. H., III

1989-01-01

During Voyager's Neptune encounter, the National Radio Astronomy Observatory's Very Large Array (VLA) will be arrayed with Goldstone antennas to receive the transmitted telemetry data from the spacecraft. The telemetry signal from the VLA will drop out periodically, resulting in a periodic drop in the received signal-to-noise ratio (SNR). The Image Statistics Decoder (ISD), which assumes a correlation between pixels, can improve the bit error rate (BER) for images during these dropout periods. Simulation results have shown that the ISD, in conjunction with the Goldstone-VLA array can provide a 3-dB gain for uncompressed images at a BER of 5.0 x 10(exp -3).

Conjunctivitis induced by a red bodied mite, Neotrombicula autumnalis

PubMed Central

Parcell, Benjamin J.; Sharpe, Graeme; Jones, Brian; Alexander, Claire L.

2013-01-01

This is a description of an unusual case of conjunctivitis caused by a trombiculid red mite, Neotrombicula autumnalis. The patient’s condition improved only after its removal and with application of carbomer gel eye drops. There have been reports of increasing numbers of severe cases of trombiculosis over the last 15 years particularly in Germany and a number of cases have also been reported in the United Kingdom. Cases where trombiculid larvae feed on any region of the head or face of humans are unknown. In addition it is most likely the patient acquired the infection from her pet cat and this is the first description of acquisition from this animal. PMID:23823162

Feasibility and effects of newly developed balance control trainer for mobility and balance in chronic stroke patients: a randomized controlled trial.

PubMed

Lee, So Hyun; Byun, Seung Deuk; Kim, Chul Hyun; Go, Jin Young; Nam, Hyeon Uk; Huh, Jin Seok; Jung, Tae Du

2012-08-01

To investigate the feasibility and effects of balance training with a newly developed Balance Control Trainer (BCT) that applied the concept of vertical movement for the improvements of mobility and balance in chronic stroke patients. Forty chronic stroke patients were randomly assigned to an experimental or a control group. The experimental group (n=20) underwent training with a BCT for 20 minutes a day, 5 days a week for 4 weeks, in addition to concurrent conventional physical therapy. The control group (n=20) underwent only conventional therapy for 4 weeks. All participants were assessed by: the Functional Ambulation Categories (FAC), 10-meter Walking Test (10mWT), Timed Up and Go test (TUG), Berg Balance Scale (BBS), Korean Modified Barthel Index (MBI), and Manual Muscle Test (MMT) before training, and at 2 and 4 weeks of training. There were statistically significant improvements in all parameters except knee extensor power at 2 weeks of treatment, and in all parameters except MBI which showed further statistically significant progress in the experimental group over the next two weeks (p<0.05). Statistically significant improvements on all measurements were observed in the experimental group after 4 weeks total. Comparing the two groups at 2 and 4 weeks of training respectively, 10mWT, TUG, and BBS showed statistically more significant improvements in the experimental group (p<0.05). Balance training with a newly developed BCT is feasible and may be an effective tool to improve balance and gait in ambulatory chronic stroke patients. Furthermore, it may provide additional benefits when used in conjunction with conventional therapies.

Technological advances in the surgical treatment of movement disorders.

PubMed

Gross, Robert E; McDougal, Margaret E

2013-08-01

Technological innovations have driven the advancement of the surgical treatment of movement disorders, from the invention of the stereotactic frame to the adaptation of deep brain stimulation (DBS). Along these lines, this review will describe recent advances in inserting neuromodulation modalities, including DBS, to the target, and in the delivery of therapy at the target. Recent radiological advances are altering the way that DBS leads are targeted and inserted, by refining the ability to visualize the subcortical targets using high-field strength magnetic resonance imaging and other innovations, such as diffusion tensor imaging, and the development of novel targeting devices enabling purely anatomical implantations without the need for neurophysiological monitoring. New portable computed tomography scanners also are facilitating lead implantation without monitoring, as well as improving radiological verification of DBS lead location. Advances in neurophysiological mapping include efforts to develop automatic target verification algorithms, and probabilistic maps to guide target selection. The delivery of therapy at the target is being improved by the development of the next generation of internal pulse generators (IPGs). These include constant current devices that mitigate the variability introduced by impedance changes of the stimulated tissue and, in the near future, devices that deliver novel stimulation patterns with improved efficiency. Closed-loop adaptive IPGs are being tested, which may tailor stimulation to ongoing changes in the nervous system, reflected in biomarkers continuously recorded by the devices. Finer-grained DBS leads, in conjunction with new IPGs and advanced programming tools, may offer improved outcomes via current steering algorithms. Finally, even thermocoagulation-essentially replaced by DBS-is being advanced by new minimally-invasive approaches that may improve this therapy for selected patients in whom it may be preferred. Functional neurosurgery has a history of being driven by technological innovation, a tradition that continues into its future.

Automated riverine landscape characterization: GIS-based tools for watershed-scale research, assessment, and management.

PubMed

Williams, Bradley S; D'Amico, Ellen; Kastens, Jude H; Thorp, James H; Flotemersch, Joseph E; Thoms, Martin C

2013-09-01

River systems consist of hydrogeomorphic patches (HPs) that emerge at multiple spatiotemporal scales. Functional process zones (FPZs) are HPs that exist at the river valley scale and are important strata for framing whole-watershed research questions and management plans. Hierarchical classification procedures aid in HP identification by grouping sections of river based on their hydrogeomorphic character; however, collecting data required for such procedures with field-based methods is often impractical. We developed a set of GIS-based tools that facilitate rapid, low cost riverine landscape characterization and FPZ classification. Our tools, termed RESonate, consist of a custom toolbox designed for ESRI ArcGIS®. RESonate automatically extracts 13 hydrogeomorphic variables from readily available geospatial datasets and datasets derived from modeling procedures. An advanced 2D flood model, FLDPLN, designed for MATLAB® is used to determine valley morphology by systematically flooding river networks. When used in conjunction with other modeling procedures, RESonate and FLDPLN can assess the character of large river networks quickly and at very low costs. Here we describe tool and model functions in addition to their benefits, limitations, and applications.

Human Growth Factor Cream and Hyaluronic Acid Serum in Conjunction with Micro Laser Peel

PubMed Central

Katz, Bruce E.; Cohen, Joel L.; Biron, Julie

2010-01-01

The present study investigated the use of a novel hyaluronic acid serum in combination with a cream comprising a mixture of human growth factors in conjunction with the micro laser peel procedure for skin rejuvenation. After preconditioning the face with the hyaluronic acid serum followed by the cream twice daily for one month, 15 female volunteers between 35 to 65 years of age with demonstrable facial wrinkling received a micro laser peel on the entire face using an erbium-doped yttrium aluminium garnet laser. Immediately following the laser procedure, the subjects applied the test products twice daily until the second laser peel one month later. Immediately following the second procedure, the subjects reapplied the test products for another month. In the large majority of subjects, erythema or edema, crusts or erosions, and transitory stinging or burning sensations after the micro laser peel were minimal or mild when the skin was treated with the serum followed by the cream. The micro laser peel in conjunction with the test products helped to significantly improve hyperpigmentation, wrinkles, and texture as compared to before treatment. This study with the micro laser peel device demonstrated that a novel hyaluronic acid serum combined with the human growth factor cream can be successfully used for skin rejuvenation in conjunction with light-to-medium invasive laser skin treatments. PMID:21203354

Long-term follow-up after submandibular gland transplantation in severe dry eyes secondary to cicatrizing conjunctivitis.

PubMed

Borrelli, Maria; Schröder, Christina; Dart, John K G; Collin, John Richard O; Sieg, Peter; Cree, Ian A; Matheson, Melville A; Tiffany, John M; Proctor, Gordon; van Best, Jaap; Hyde, Nick; Geerling, Gerd

2010-12-01

To evaluate the long-term results of autologous submandibular gland transplantation in eyes with cicatrizing conjunctivitis and to determine biomechanical and biochemical features of the resulting salivary tear film. Prospective, observational case series. Fifteen eyes with cicatrizing conjunctivitis with a viable autologous submandibular gland transplantation were compared with 10 eyes with cicatrizing conjunctivitis and a failed submandibular gland transplantation or no submandibular gland transplantation. Best-corrected visual acuity, frequency of tear substitute instillation, severity of dry eye discomfort, lid margin erythema, conjunctival hyperemia, corneal epithelial edema, tear film break-up time, Schirmer test results, and corneal fluorescein and conjunctival Rose Bengal staining were evaluated. In a subgroup central corneal thickness and sensitivity, corneal epithelial barrier function, conjunctival and lid margin flora, and conjunctival impression cytologic analysis results were evaluated. In 3 patients, preoperative and postoperative tear samples were analyzed for viscosity, surface tension, and presence of mucins. Submandibular gland autotransplantation resulted in long-term improvement of subjective, objective, and some ocular surface parameters. Salivary mucins were detectable in salivary tears after submandibular gland transplantation. The viscosity of salivary tears was more similar to normal saliva and the surface tension was intermediate between the 2 original secretions. Submandibular gland autotransplantation provides long-term relief from pain and reduces the need for frequent installation of lubricants. Copyright © 2010 Elsevier Inc. All rights reserved.

Test drilling in basalts, Lalamilo area, South Kohala District, Hawaii

USGS Publications Warehouse

Teasdale, Warren E.

1980-01-01

Test drilling has determined that a downhole-percussion airhammer can be used effectively to drill basalts in Hawaii. When used in conjunction with a foam-type drilling fluid, the hammer-bit penetration rate was rapid. Continuous drill cuttings from the materials penetrated were obtained throughout the borehole except from extremely fractured or weathered basalt zones where circulation was lost or limited. Cementing of these zones as soon as encountered reduced problems of stuck tools, washouts, and loss of drill-cuttings. Supplies and logistics on the Hawaiian Islands, always a major concern, require that all anticipated drilling supplies, spare rig and tool parts, drilling muds and additives, foam, and miscellaneous hardware be on hand before starting to drill. If not, the resulting rig downtime is costly in both time and money. (USGS)

CRI planning and scheduling for space

NASA Technical Reports Server (NTRS)

Aarup, Mads

1994-01-01

Computer Resources International (CRI) has many years of experience in developing space planning and scheduling systems for the European Space Agency. Activities range from AIT/AIV planning over mission planning to research in on-board autonomy using advanced planning and scheduling technologies in conjunction with model based diagnostics. This article presents four projects carried out for ESA by CRI with various subcontractors: (1) DI, Distributed Intelligence for Ground/Space Systems is an on-going research project; (2) GMPT, Generic Mission Planning Toolset, a feasibility study concluded in 1993; (3) OPTIMUM-AIV, Open Planning Tool for AIV, development of a knowledge based AIV planning and scheduling tool ended in 1992; and (4) PlanERS-1, development of an AI and knowledge-based mission planning prototype for the ERS-1 earth observation spacecraft ended in 1991.

Nutrient mitigation in a temporary river basin.

PubMed

Tzoraki, Ourania; Nikolaidis, Nikolaos P; Cooper, David; Kassotaki, Elissavet

2014-04-01

We estimate the nutrient budget in a temporary Mediterranean river basin. We use field monitoring and modelling tools to estimate nutrient sources and transfer in both high and low flow conditions. Inverse modelling by the help of PHREEQC model validated the hypothesis of a losing stream during the dry period. Soil and Water Assessment Tool model captured the water quality of the basin. The 'total daily maximum load' approach is used to estimate the nutrient flux status by flow class, indicating that almost 60% of the river network fails to meet nitrogen criteria and 50% phosphate criteria. We recommend that existing well-documented remediation measures such as reforestation of the riparian area or composting of food process biosolids should be implemented to achieve load reduction in close conjunction with social needs.

Fixing Maintenance Productivity.

ERIC Educational Resources Information Center

Fickes, Michael

2003-01-01

Describes how one university's facility managers use Nextel communications technology in conjunction with a Famis Software maintenance management system to improve the productivity of its maintenance technicians. The system uses a wireless Internet connection to automate the flow of work order information to and from technicians. The key to these…

Participant Modelling Training Programme: Tutoring the Paraprofessional.

ERIC Educational Resources Information Center

Romi, Shlomo; Teichman, Meir

1998-01-01

A participant-modeling training program designed to improve self-efficacy and the ability to cope effectively with stressful situations was implemented with young paraprofessional counselors who work in conjunction with youth-advancement counselors. Results are presented for self-efficacy and motivation variables. Unexpected findings are…

The Mechanism of Ultrasonic Vibration on Grain Refining and Degassing in GTA Spot Welding of Copper Joints.

PubMed

Al-Ezzi, Salih; Quan, Gaofeng; Elrayah, Adil

2018-05-07

This paper examines the effect of ultrasonic vibration (USV) on grain size and interrupted porosity in Gas Tungsten Arc (GTA) spot-welded copper. Grain size was refined by perpendicularly attaching a transducer to the welded sheet and applying USV to the weld pool for a short time (0, 2, 4, and 6 s) in addition improvements to the degassing process. Results illustrate a significant reduction of grain size (57%). Notably, USV provided interaction between reformations (fragmentation) and provided nucleation points (detaching particles from the fusion line) for grains in the nugget zone and the elimination of porosity in the nugget zone. The GTA spot welding process, in conjunction with USV, demonstrated an improvement in the corrosion potential for a copper spot-welded joint in comparison to the joint welded without assistance of USV. Finally, welding of copper by GTA spot welding in conjunction with ultrasound for 2 s presented significant mechanical properties.

The Mechanism of Ultrasonic Vibration on Grain Refining and Degassing in GTA Spot Welding of Copper Joints

PubMed Central

Quan, Gaofeng

2018-01-01

This paper examines the effect of ultrasonic vibration (USV) on grain size and interrupted porosity in Gas Tungsten Arc (GTA) spot-welded copper. Grain size was refined by perpendicularly attaching a transducer to the welded sheet and applying USV to the weld pool for a short time (0, 2, 4, and 6 s) in addition improvements to the degassing process. Results illustrate a significant reduction of grain size (57%). Notably, USV provided interaction between reformations (fragmentation) and provided nucleation points (detaching particles from the fusion line) for grains in the nugget zone and the elimination of porosity in the nugget zone. The GTA spot welding process, in conjunction with USV, demonstrated an improvement in the corrosion potential for a copper spot-welded joint in comparison to the joint welded without assistance of USV. Finally, welding of copper by GTA spot welding in conjunction with ultrasound for 2 s presented significant mechanical properties. PMID:29735894

Temperature-controlled electrothermal atomization-atomic absorption spectrometry using a pyrometric feedback system in conjunction with a background monitoring device

NASA Astrophysics Data System (ADS)

Van Deijck, W.; Roelofsen, A. M.; Pieters, H. J.; Herber, R. F. M.

The construction of a temperature-controlled feedback system for electrothermal atomization-atomic absorption spectrometry (ETA-AAS) using an optical pyrometer applied to the atomization stage is described. The system was used in conjunction with a fast-response background monitoring device. The heating rate of the furnace amounted to 1400° s -1 with a reproducibility better than 1%. The precision of the temperature control at a steady state temperature of 2000°C was 0.1%. The analytical improvements offered by the present system have been demonstrated by the determination of cadmium and lead in blood and finally by the determination of lead in serum. Both the sensitivity and the precision of the method have been improved. The accuracy of the method was checked by determining the lead content for a number of scrum samples both by ETA-AAS and differential pulse anodic stripping voltametry (DPASV) and proved to be satisfactory.

Building on a Foundation of Strength: Fiscal Year 2012 United States Army Annual Financial Report

DTIC Science & Technology

2012-01-01

competency-based training in conjunction with the Army competency management system. Â Fellowships and experience-broadening interagency, international ...operations. This section focuses on the Army’s system of internal controls to comply with such laws as the Federal Financial Management Improvement Act...accurate financial information through efficient and effective internal controls. By having effective internal controls, the Army is able to improve

Maternal and Neonatal Risk Factors Associated with Vertical Transmission of Ophthalmia Neonatorum in Neonates Receiving Health Care in Blantyre, Malawi

PubMed Central

Ranjit, Roshni; Menezes, Lynette; Drucker, Mitchell; Msukwa, Gerald; Batumba, Nkume

2014-01-01

Context: Neonatal conjunctivitis is associated with poor prenatal care worldwide. Purpose: Data on neonatal conjunctivitis is scarce in Malawi. This study describes risk factors associated with conjunctivitis in neonates born in a large tertiary care hospital in Blantyre, Malawi. Materials and Methods: Medical records of a retrospective cohort of 231 neonates diagnosed with conjunctivitis from January 2006 to December 2009 at a large tertiary hospital in Malawi were reviewed. All subjects were clinically diagnosed with ophthalmia neonatorum. Data were collected on patient demographics and clinical features. The frequencies were calculated of various risk factors in neonates with ophthalmia neonatorum and their mothers as well as the treatments administered. Results: Mean age of the mother was 23.45 years (range, 15-40 years), and the mean number of previous deliveries was 2.3 (range, 1-7) children. Nearly, 80% of mothers delivered preterm infants via spontaneous vaginal delivery. The mean birth weight of neonates was 2869.6 grams (1100-5000 grams). Among mothers, premature rupture of membranes was the leading risk factor (24%) followed by sepsis during labor (9%), and history of sexually transmitted infections (STI) (7%). Neonates presented with low Apgar scores (19%), fever (8%), and/or meconium aspiration (5%). Providers treated patients empirically with a varied combination of benzyl penicillin, gentamicin, tetracycline eye ointment, and saline eye wash. Tetracycline with a saline eyewash was used frequently (34%) compared with combinations of benzyl penicillin and gentamicin. Conclusions: Improving prenatal care to reduce sepsis, traumatic deliveries, and early diagnosis of STI with appropriate treatment may potentially reduce vertical transmission of neonatal conjunctivitis in this understudied population. PMID:25100909

Pantomiming tool use with an imaginary tool in hand as compared to demonstration with tool in hand specifically modulates the left middle and superior temporal gyri.

PubMed

Lausberg, Hedda; Kazzer, Philipp; Heekeren, Hauke R; Wartenburger, Isabell

2015-10-01

Neuropsychological lesion studies evidence the necessity to differentiate between various forms of tool-related actions such as real tool use, tool use demonstration with tool in hand and without physical target object, and pantomime without tool in hand. However, thus far, neuroimaging studies have primarily focused only on investigating tool use pantomimes. The present fMRI study investigates pantomime without tool in hand as compared to tool use demonstration with tool in hand in order to explore patterns of cerebral signal modulation associated with acting with imaginary tools in hand. Fifteen participants performed with either hand (i) tool use pantomime with an imaginary tool in hand in response to visual tool presentation and (ii) tool use demonstration with tool in hand in response to visual-tactile tool presentation. In both conditions, no physical target object was present. The conjunction analysis of the right and left hands executions of tool use pantomime relative to tool use demonstration yielded significant activity in the left middle and superior temporal lobe. In contrast, demonstration relative to pantomime revealed large bihemispherically distributed homologous areas of activity. Thus far, fMRI studies have demonstrated the relevance of the left middle and superior temporal gyri in viewing, naming, and matching tools and related actions and contexts. Since in our study all these factors were equally (ir)relevant both in the tool use pantomime and the tool use demonstration conditions, the present findings enhance the knowledge about the function of these brain regions in tool-related cognitive processes. The two contrasted conditions only differ regarding the fact that the pantomime condition requires the individual to act with an imaginary tool in hand. Therefore, we suggest that the left middle and superior temporal gyri are specifically involved in integrating the projected mental image of a tool in the execution of a tool-specific movement concept. Copyright © 2015 Elsevier Ltd. All rights reserved.

Organizing Environmental Flow Frameworks to Meet Hydropower Mitigation Needs

NASA Astrophysics Data System (ADS)

McManamay, Ryan A.; Brewer, Shannon K.; Jager, Henriette I.; Troia, Matthew J.

2016-09-01

The global recognition of the importance of natural flow regimes to sustain the ecological integrity of river systems has led to increased societal pressure on the hydropower industry to change plant operations to improve downstream aquatic ecosystems. However, a complete reinstatement of natural flow regimes is often unrealistic when balancing water needs for ecosystems, energy production, and other human uses. Thus, stakeholders must identify a prioritized subset of flow prescriptions that meet ecological objectives in light of realistic constraints. Yet, isolating aspects of flow regimes to restore downstream of hydropower facilities is among the greatest challenges of environmental flow science due, in part, to the sheer volume of available environmental flow tools in conjunction with complex negotiation-based regulatory procedures. Herein, we propose an organizational framework that structures information and existing flow paradigms into a staged process that assists stakeholders in implementing environmental flows for hydropower facilities. The framework identifies areas where regulations fall short of the needed scientific process, and provide suggestions for stakeholders to ameliorate those situations through advanced preparation. We highlight the strengths of existing flow paradigms in their application to hydropower settings and suggest when and where tools are most applicable. Our suggested framework increases the effectiveness and efficiency of the e-flow implementation process by rapidly establishing a knowledge base and decreasing uncertainty so more time can be devoted to filling knowledge gaps. Lastly, the framework provides the structure for a coordinated research agenda to further the science of environmental flows related to hydropower environments.

Organizing environmental flow frameworks to meet hydropower mitigation needs

USGS Publications Warehouse

McManamay, Ryan A.; Brewer, Shannon K.; Jager, Henriette; Troia, Matthew J.

2016-01-01

The global recognition of the importance of natural flow regimes to sustain the ecological integrity of river systems has led to increased societal pressure on the hydropower industry to change plant operations to improve downstream aquatic ecosystems. However, a complete reinstatement of natural flow regimes is often unrealistic when balancing water needs for ecosystems, energy production, and other human uses. Thus, stakeholders must identify a prioritized subset of flow prescriptions that meet ecological objectives in light of realistic constraints. Yet, isolating aspects of flow regimes to restore downstream of hydropower facilities is among the greatest challenges of environmental flow science due, in part, to the sheer volume of available environmental flow tools in conjunction with complex negotiation-based regulatory procedures. Herein, we propose an organizational framework that structures information and existing flow paradigms into a staged process that assists stakeholders in implementing environmental flows for hydropower facilities. The framework identifies areas where regulations fall short of the needed scientific process, and provide suggestions for stakeholders to ameliorate those situations through advanced preparation. We highlight the strengths of existing flow paradigms in their application to hydropower settings and suggest when and where tools are most applicable. Our suggested framework increases the effectiveness and efficiency of the e-flow implementation process by rapidly establishing a knowledge base and decreasing uncertainty so more time can be devoted to filling knowledge gaps. Lastly, the framework provides the structure for a coordinated research agenda to further the science of environmental flows related to hydropower environments.

Java-Based Diabetes Type 2 Prediction Tool for Better Diagnosis

PubMed Central

Odedra, Devang; Mallick, Medhavi; Shukla, Prateek; Samanta, Subir; Vidyarthi, Ambarish S.

2012-01-01

Abstract Background The concept of classification of clinical data can be utilized in the development of an effective diagnosis system by taking the advantage of computational intelligence. Diabetes disease diagnosis via proper interpretation of the diabetes data is an important problem in neural networks. Unfortunately, although several classification studies have been carried out with significant performance, many of the current methods often fail to reach out to patients. Graphical user interface-enabled tools need to be developed through which medical practitioners can simply enter the health profiles of their patients and receive an instant diabetes prediction with an acceptable degree of confidence. Methods In this study, the neural network approach was used for a dataset of 768 persons from a Pima Indian population living near Phoenix, AZ. A neural network mixture of experts model was trained with these data using the expectation-minimization algorithm. Results The mixture of experts method was used to train the algorithm with 97% accuracy. A graphical user interface was developed that would work in conjunction with the trained network to provide the output in a presentable format. Conclusions This study provides a machine-implementable approach that can be used by physicians and patients to minimize the extent of error in diagnosis. The authors are hopeful that replication of results of this study in other populations may lead to improved diagnosis. Physicians can simply enter the health profile of patients and get the diagnosis for diabetes type 2. PMID:22059431

Organizing Environmental Flow Frameworks to Meet Hydropower Mitigation Needs.

PubMed

McManamay, Ryan A; Brewer, Shannon K; Jager, Henriette I; Troia, Matthew J

2016-09-01

The global recognition of the importance of natural flow regimes to sustain the ecological integrity of river systems has led to increased societal pressure on the hydropower industry to change plant operations to improve downstream aquatic ecosystems. However, a complete reinstatement of natural flow regimes is often unrealistic when balancing water needs for ecosystems, energy production, and other human uses. Thus, stakeholders must identify a prioritized subset of flow prescriptions that meet ecological objectives in light of realistic constraints. Yet, isolating aspects of flow regimes to restore downstream of hydropower facilities is among the greatest challenges of environmental flow science due, in part, to the sheer volume of available environmental flow tools in conjunction with complex negotiation-based regulatory procedures. Herein, we propose an organizational framework that structures information and existing flow paradigms into a staged process that assists stakeholders in implementing environmental flows for hydropower facilities. The framework identifies areas where regulations fall short of the needed scientific process, and provide suggestions for stakeholders to ameliorate those situations through advanced preparation. We highlight the strengths of existing flow paradigms in their application to hydropower settings and suggest when and where tools are most applicable. Our suggested framework increases the effectiveness and efficiency of the e-flow implementation process by rapidly establishing a knowledge base and decreasing uncertainty so more time can be devoted to filling knowledge gaps. Lastly, the framework provides the structure for a coordinated research agenda to further the science of environmental flows related to hydropower environments.

Casual Video Games as Training Tools for Attentional Processes in Everyday Life.

PubMed

Stroud, Michael J; Whitbourne, Susan Krauss

2015-11-01

Three experiments examined the attentional components of the popular match-3 casual video game, Bejeweled Blitz (BJB). Attentionally demanding, BJB is highly popular among adults, particularly those in middle and later adulthood. In experiment 1, 54 older adults (Mage = 70.57) and 33 younger adults (Mage = 19.82) played 20 rounds of BJB, and completed online tasks measuring reaction time, simple visual search, and conjunction visual search. Prior experience significantly predicted BJB scores for younger adults, but for older adults, both prior experience and simple visual search task scores predicted BJB performance. Experiment 2 tested whether BJB practice alone would result in a carryover benefit to a visual search task in a sample of 58 young adults (Mage = 19.57) who completed 0, 10, or 30 rounds of BJB followed by a BJB-like visual search task with targets present or absent. Reaction times were significantly faster for participants who completed 30 but not 10 rounds of BJB compared with the search task only. This benefit was evident when targets were both present and absent, suggesting that playing BJB improves not only target detection, but also the ability to quit search effectively. Experiment 3 tested whether the attentional benefit in experiment 2 would apply to non-BJB stimuli. The results revealed a similar numerical but not significant trend. Taken together, the findings suggest there are benefits of casual video game playing to attention and relevant everyday skills, and that these games may have potential value as training tools.

Estimating rare events in biochemical systems using conditional sampling.

PubMed

Sundar, V S

2017-01-28

The paper focuses on development of variance reduction strategies to estimate rare events in biochemical systems. Obtaining this probability using brute force Monte Carlo simulations in conjunction with the stochastic simulation algorithm (Gillespie's method) is computationally prohibitive. To circumvent this, important sampling tools such as the weighted stochastic simulation algorithm and the doubly weighted stochastic simulation algorithm have been proposed. However, these strategies require an additional step of determining the important region to sample from, which is not straightforward for most of the problems. In this paper, we apply the subset simulation method, developed as a variance reduction tool in the context of structural engineering, to the problem of rare event estimation in biochemical systems. The main idea is that the rare event probability is expressed as a product of more frequent conditional probabilities. These conditional probabilities are estimated with high accuracy using Monte Carlo simulations, specifically the Markov chain Monte Carlo method with the modified Metropolis-Hastings algorithm. Generating sample realizations of the state vector using the stochastic simulation algorithm is viewed as mapping the discrete-state continuous-time random process to the standard normal random variable vector. This viewpoint opens up the possibility of applying more sophisticated and efficient sampling schemes developed elsewhere to problems in stochastic chemical kinetics. The results obtained using the subset simulation method are compared with existing variance reduction strategies for a few benchmark problems, and a satisfactory improvement in computational time is demonstrated.

Feedback control of the lower hybrid power deposition profile on Tore Supra

NASA Astrophysics Data System (ADS)

Barana, O.; Mazon, D.; Laborde, L.; Turco, F.

2007-07-01

The Tore Supra facility is well suited to study ITER relevant topics such as the real-time control of plasma current and the sustaining of steady-state discharges. This work describes a tool that was recently developed and implemented on Tore Supra to control in real time, by means of the direct knowledge of the suprathermal electron local emission profile, the width of the lower hybrid power deposition profile. This quantity can be considered to some extent equivalent to the width of the plasma current density profile in case of fully non-inductive discharges. This system takes advantage of an accurate hard x-ray diagnostics, of an efficient lower hybrid additional heating and of a reliable real-time communication network. The successful experiments carried out to test the system employed, as actuators, the parallel refractive index n// and the total power PLH. The control of the suprathermal electron local emission profile through n// was also integrated with the feedback control of the total plasma current IP with PLH and of the loop voltage Vloop with the central solenoid flux. These results demonstrate that the system is robust, reliable and able to counterbalance destabilizing events. This tool can be effectively used in the future in fully non-inductive discharges to improve the MHD stability and to maintain internal transport barriers or lower hybrid enhanced performance modes. The real-time control of the lower hybrid power deposition profile could also be used in conjunction with the electron-cyclotron radiofrequency heating for synergy studies.

Effect of rasanjana madhu ashchyotana in netra abhishyanda (mucopurulent conjunctivitis).

PubMed

Bhardwaj, Atul; Tanwar, Manoj

2011-07-01

To evaluate the comparative efficacy of Ayurvedic formulation a Rasanjana Madhu (RM) eye drops and Honey Rose (HR) water eye drops in Netra Abhishyanda in mucopurulent conjunctivitis, the current study is planned. Total of 35 patients attending the outpatient department of Shalakya Tantra at R. G. G. Postgraduate Ayurvedic College, Paprola, Distt. Kangra, Himachal Pradesh with characteristic features of Netra Abhishyanda were selected for the present study. Twenty patients were given trial drug, i.e., RM eye drops, while 15 patients were given HR eye drops. Random sampling technique was adopted for the present study. The duration of the treatment was 7 days with 1 week follow-up. Patients receiving the trial group demonstrated reduction of redness, burning sensation, lacrimation, photophobia, foreign body sensation, discharge, and congestion, which were statistically significant with 93% patients cured or markedly improved category. Signs and symptoms stated above were also statistically reduced with HR eye drops, probably because of well-documented hygroscopic and bacteriocidal properties of honey. Based on the study, it can be concluded that, RM eye drops are very effective in the management of Netra Abhishyanda viz. Infective conjunctivitis.

Effect of Rasanjana Madhu Ashchyotana in Netra Abhishyanda (Mucopurulent Conjunctivitis)

PubMed Central

Bhardwaj, Atul; Tanwar, Manoj

2011-01-01

To evaluate the comparative efficacy of Ayurvedic formulation a Rasanjana Madhu (RM) eye drops and Honey Rose (HR) water eye drops in Netra Abhishyanda in mucopurulent conjunctivitis, the current study is planned. Total of 35 patients attending the outpatient department of Shalakya Tantra at R. G. G. Postgraduate Ayurvedic College, Paprola, Distt. Kangra, Himachal Pradesh with characteristic features of Netra Abhishyanda were selected for the present study. Twenty patients were given trial drug, i.e., RM eye drops, while 15 patients were given HR eye drops. Random sampling technique was adopted for the present study. The duration of the treatment was 7 days with 1 week follow-up. Patients receiving the trial group demonstrated reduction of redness, burning sensation, lacrimation, photophobia, foreign body sensation, discharge, and congestion, which were statistically significant with 93% patients cured or markedly improved category. Signs and symptoms stated above were also statistically reduced with HR eye drops, probably because of well-documented hygroscopic and bacteriocidal properties of honey. Based on the study, it can be concluded that, RM eye drops are very effective in the management of Netra Abhishyanda viz. Infective conjunctivitis. PMID:22529652

Development of a Nonlinear Probability of Collision Tool for the Earth Observing System

NASA Technical Reports Server (NTRS)

McKinley, David P.

2006-01-01

The Earth Observing System (EOS) spacecraft Terra, Aqua, and Aura fly in constellation with several other spacecraft in 705-kilometer mean altitude sun-synchronous orbits. All three spacecraft are operated by the Earth Science Mission Operations (ESMO) Project at Goddard Space Flight Center (GSFC). In 2004, the ESMO project began assessing the probability of collision of the EOS spacecraft with other space objects. In addition to conjunctions with high relative velocities, the collision assessment method for the EOS spacecraft must address conjunctions with low relative velocities during potential collisions between constellation members. Probability of Collision algorithms that are based on assumptions of high relative velocities and linear relative trajectories are not suitable for these situations; therefore an algorithm for handling the nonlinear relative trajectories was developed. This paper describes this algorithm and presents results from its validation for operational use. The probability of collision is typically calculated by integrating a Gaussian probability distribution over the volume swept out by a sphere representing the size of the space objects involved in the conjunction. This sphere is defined as the Hard Body Radius. With the assumption of linear relative trajectories, this volume is a cylinder, which translates into simple limits of integration for the probability calculation. For the case of nonlinear relative trajectories, the volume becomes a complex geometry. However, with an appropriate choice of coordinate systems, the new algorithm breaks down the complex geometry into a series of simple cylinders that have simple limits of integration. This nonlinear algorithm will be discussed in detail in the paper. The nonlinear Probability of Collision algorithm was first verified by showing that, when used in high relative velocity cases, it yields similar answers to existing high relative velocity linear relative trajectory algorithms. The comparison with the existing high velocity/linear theory will also be used to determine at what relative velocity the analysis should use the new nonlinear theory in place of the existing linear theory. The nonlinear algorithm was also compared to a known exact solution for the probability of collision between two objects when the relative motion is strictly circular and the error covariance is spherically symmetric. Figure I shows preliminary results from this comparison by plotting the probabilities calculated from the new algorithm and those from the exact solution versus the Hard Body Radius to Covariance ratio. These results show about 5% error when the Hard Body Radius is equal to one half the spherical covariance magnitude. The algorithm was then combined with a high fidelity orbit state and error covariance propagator into a useful tool for analyzing low relative velocity nonlinear relative trajectories. The high fidelity propagator is capable of using atmospheric drag, central body gravitational, solar radiation, and third body forces to provide accurate prediction of the relative trajectories and covariance evolution. The covariance propagator also includes a process noise model to ensure realistic evolutions of the error covariance. This paper will describe the integration of the nonlinear probability algorithm and the propagators into a useful collision assessment tool. Finally, a hypothetical case study involving a low relative velocity conjunction between members of the Earth Observation System constellation will be presented.

Evaluation of Personal Cooling Systems in Conjunction with Explosive Ordnance Disposal Suits

DTIC Science & Technology

1992-06-01

of thermal comfort and perceived exertion. The results indicated that wearing the EOD suit produces significant increases in thermal physiological...indicated reduced perceived exertion levels and improved thermal comfort when wearing the liquid-cooling garment with a EOD suit. In contrast, the ribbed

Assessment of range planting as a conservation practice [Chapter 4

Treesearch

Stuart P. Hardegree; Thomas A. Jones; Bruce A. Roundy; Nancy L. Shaw; Thomas A. Monaco

2011-01-01

The Range Planting Conservation Practice Standard is used to inform development of Natural Resource Conservation Service (NRCS) management recommendations for improving vegetation composition and productivity of grazed plant communities. Range planting recommendations are generally implemented within an integrated conservation management system in conjunction with...

Sexual Hypnotherapy for Couples and Family Counselors.

ERIC Educational Resources Information Center

Araoz, Daniel; Burte, Jan; Goldin, Eugene

2001-01-01

Presents the utilization of Ericksonian hypnotic techniques in conjunction with cognitive behavioral techniques collectively labeled the New Hypnosis, as they apply to the treatment of male and female sexual dysfunction within a counseling setting. Specific techniques to improve functioning throughout the five stages of sexual response are…

Educating Library Users at the Copperbelt University.

ERIC Educational Resources Information Center

Lungu, Charles B. M.

1990-01-01

Describes a library user education program for first-year students at Zambia's Copperbelt University that is designed to increase student awareness of available resources; improve their skills in independent learning; and enhance the presentation of their coursework. Planning user education programs in conjunction with faculty and other…

Point Systems Made Simple with Google Docs

ERIC Educational Resources Information Center

Blood, Erika

2011-01-01

Point systems, used in conjunction with positive reinforcement for appropriate behavior, have been used widely and successfully for decades to improve the inappropriate classroom behavior of students with emotional and behavioral problems (Cancio & Johnson, 2007; Drege & Beare, 1991; Gable & Strain, 1981; Jones, Dohrn, & Dunn, 2004; Klimas &…

Escher: A Web Application for Building, Sharing, and Embedding Data-Rich Visualizations of Biological Pathways

DOE Office of Scientific and Technical Information (OSTI.GOV)

King, Zachary A.; Drager, Andreas; Ebrahim, Ali

Escher is a web application for visualizing data on biological pathways. Three key features make Escher a uniquely effective tool for pathway visualization. First, users can rapidly design new pathway maps. Escher provides pathway suggestions based on user data and genome-scale models, so users can draw pathways in a semi-automated way. Second, users can visualize data related to genes or proteins on the associated reactions and pathways, using rules that define which enzymes catalyze each reaction. Thus, users can identify trends in common genomic data types (e.g. RNA-Seq, proteomics, ChIP)—in conjunction with metabolite- and reaction-oriented data types (e.g. metabolomics, fluxomics).more » Third, Escher harnesses the strengths of web technologies (SVG, D3, developer tools) so that visualizations can be rapidly adapted, extended, shared, and embedded. This paper provides examples of each of these features and explains how the development approach used for Escher can be used to guide the development of future visualization tools.« less

Escher: A Web Application for Building, Sharing, and Embedding Data-Rich Visualizations of Biological Pathways

PubMed Central

King, Zachary A.; Dräger, Andreas; Ebrahim, Ali; Sonnenschein, Nikolaus; Lewis, Nathan E.; Palsson, Bernhard O.

2015-01-01

Escher is a web application for visualizing data on biological pathways. Three key features make Escher a uniquely effective tool for pathway visualization. First, users can rapidly design new pathway maps. Escher provides pathway suggestions based on user data and genome-scale models, so users can draw pathways in a semi-automated way. Second, users can visualize data related to genes or proteins on the associated reactions and pathways, using rules that define which enzymes catalyze each reaction. Thus, users can identify trends in common genomic data types (e.g. RNA-Seq, proteomics, ChIP)—in conjunction with metabolite- and reaction-oriented data types (e.g. metabolomics, fluxomics). Third, Escher harnesses the strengths of web technologies (SVG, D3, developer tools) so that visualizations can be rapidly adapted, extended, shared, and embedded. This paper provides examples of each of these features and explains how the development approach used for Escher can be used to guide the development of future visualization tools. PMID:26313928

Transposons As Tools for Functional Genomics in Vertebrate Models.

PubMed

Kawakami, Koichi; Largaespada, David A; Ivics, Zoltán

2017-11-01

Genetic tools and mutagenesis strategies based on transposable elements are currently under development with a vision to link primary DNA sequence information to gene functions in vertebrate models. By virtue of their inherent capacity to insert into DNA, transposons can be developed into powerful tools for chromosomal manipulations. Transposon-based forward mutagenesis screens have numerous advantages including high throughput, easy identification of mutated alleles, and providing insight into genetic networks and pathways based on phenotypes. For example, the Sleeping Beauty transposon has become highly instrumental to induce tumors in experimental animals in a tissue-specific manner with the aim of uncovering the genetic basis of diverse cancers. Here, we describe a battery of mutagenic cassettes that can be applied in conjunction with transposon vectors to mutagenize genes, and highlight versatile experimental strategies for the generation of engineered chromosomes for loss-of-function as well as gain-of-function mutagenesis for functional gene annotation in vertebrate models, including zebrafish, mice, and rats. Copyright © 2017 Elsevier Ltd. All rights reserved.

Application of predictive modelling techniques in industry: from food design up to risk assessment.

PubMed

Membré, Jeanne-Marie; Lambert, Ronald J W

2008-11-30

In this communication, examples of applications of predictive microbiology in industrial contexts (i.e. Nestlé and Unilever) are presented which cover a range of applications in food safety from formulation and process design to consumer safety risk assessment. A tailor-made, private expert system, developed to support safe product/process design assessment is introduced as an example of how predictive models can be deployed for use by non-experts. Its use in conjunction with other tools and software available in the public domain is discussed. Specific applications of predictive microbiology techniques are presented relating to investigations of either growth or limits to growth with respect to product formulation or process conditions. An example of a probabilistic exposure assessment model for chilled food application is provided and its potential added value as a food safety management tool in an industrial context is weighed against its disadvantages. The role of predictive microbiology in the suite of tools available to food industry and some of its advantages and constraints are discussed.

Escher: A Web Application for Building, Sharing, and Embedding Data-Rich Visualizations of Biological Pathways

DOE PAGES

King, Zachary A.; Drager, Andreas; Ebrahim, Ali; ...

2015-08-27

Escher is a web application for visualizing data on biological pathways. Three key features make Escher a uniquely effective tool for pathway visualization. First, users can rapidly design new pathway maps. Escher provides pathway suggestions based on user data and genome-scale models, so users can draw pathways in a semi-automated way. Second, users can visualize data related to genes or proteins on the associated reactions and pathways, using rules that define which enzymes catalyze each reaction. Thus, users can identify trends in common genomic data types (e.g. RNA-Seq, proteomics, ChIP)—in conjunction with metabolite- and reaction-oriented data types (e.g. metabolomics, fluxomics).more » Third, Escher harnesses the strengths of web technologies (SVG, D3, developer tools) so that visualizations can be rapidly adapted, extended, shared, and embedded. This paper provides examples of each of these features and explains how the development approach used for Escher can be used to guide the development of future visualization tools.« less

Simulation Based Optimization of Complex Monolithic Composite Structures Using Cellular Core Technology

NASA Astrophysics Data System (ADS)

Hickmott, Curtis W.

Cellular core tooling is a new technology which has the capability to manufacture complex integrated monolithic composite structures. This novel tooling method utilizes thermoplastic cellular cores as inner tooling. The semi-rigid nature of the cellular cores makes them convenient for lay-up, and under autoclave temperature and pressure they soften and expand providing uniform compaction on all surfaces including internal features such as ribs and spar tubes. This process has the capability of developing fully optimized aerospace structures by reducing or eliminating assembly using fasteners or bonded joints. The technology is studied in the context of evaluating its capabilities, advantages, and limitations in developing high quality structures. The complex nature of these parts has led to development of a model using the Finite Element Analysis (FEA) software Abaqus and the plug-in COMPRO Common Component Architecture (CCA) provided by Convergent Manufacturing Technologies. This model utilizes a "virtual autoclave" technique to simulate temperature profiles, resin flow paths, and ultimately deformation from residual stress. A model has been developed simulating the temperature profile during curing of composite parts made with the cellular core technology. While modeling of composites has been performed in the past, this project will look to take this existing knowledge and apply it to this new manufacturing method capable of building more complex parts and develop a model designed specifically for building large, complex components with a high degree of accuracy. The model development has been carried out in conjunction with experimental validation. A double box beam structure was chosen for analysis to determine the effects of the technology on internal ribs and joints. Double box beams were manufactured and sectioned into T-joints for characterization. Mechanical behavior of T-joints was performed using the T-joint pull-off test and compared to traditional tooling methods. Components made with the cellular core tooling method showed an improved strength at the joints. It is expected that this knowledge will help optimize the processing of complex, integrated structures and benefit applications in aerospace where lighter, structurally efficient components would be advantageous.

SLI Complex Curvature Friction Stir Weld Risk Reduction Program

NASA Technical Reports Server (NTRS)

Hartley, Paula J.; Schneider, Jules; Jones, Chip; Lawless, Kirby; Russell, Carolyn

2003-01-01

The Space Launch Initiative Program (SLI) in conjunction with the National Center for Advanced Manufacturing (NCAM) will demonstrate the ability to produce large-scale complex curvature hardware using the self-reacting friction stir welding process. This multi-phased risk reduction program includes friction stir welding process development and manufacture of a 22-ft diameter quarter dome using a conventional tooling approach; it culminates in a 27.5-ft diameter quarter dome demonstration performed on a 5-axis Universal Weld System. The design, fabrication, and installation of the Universal Weld System is made possible through a collaboration between the State of Louisiana, NASA, and the University of New Orleans. The Universal Weld System, manufactured by MTS Systems Corporation, will be installed at the Michoud Assembly Facility in New Orleans, Louisiana, and will be capable of manufacturing domes up to 30 ft in diameter. All welding will be accomplished using the Adaptable Adjustable Pin Tool (AdAPT) weld head and controller manufactured by MTS. Weld parameters will be developed for an aluminum alloy in gauges ranging from 0.320 to 0.400 in. thick. Weld quality will be verified through radiography, mechanical property testing at ambient and LN2 temperatures, and metallurgical analysis. The AdAPT weld head will then be mounted on a 22-ft diameter dome tool, which will be modified to include a welding track and drive system for moving the AdAPT weld head along the weld joint. This tool will then be used to manufacture a 22-ft diameter dome of an aluminum alloy, with 0.320-in. constant thickness joints, consisting of three individual gore panels. Finally, the 27.5-ft diameter quarter dome will be welded on the Universal Weld System. The quarter dome will consist of three individual gore panels with weld lands tapering from 0.320 to 0.360 in. in thickness. With the demonstration of these welds, the ability to manufacture large diameter domes using the friction stir weld process in conjunction with a universal weld system provides a low risk approach to the fabrication of aluminum tanks for future launch vehicle applications.

Autobiography as tool to improve lifestyle, well being, and self-narrative in patients with mental disorders.

PubMed

Smorti, Andrea; Pananti, Bianca; Rizzo, Aida

2010-08-01

The aims of the present study were to explore how the autobiographical process can lead to a transformation in psychiatric patients' lifestyle, well-being, and self-narrative. Nine participants, aged between 20 and 42 years and affected by axis I psychiatric disorders (DSM IV) were selected to participate in an autobiographical laboratory. Eight to 10 meetings took place, each lasting about an hour, during which autobiographical accounts were collected. At the beginning and end of the autobiographical laboratory, the medical staff completed the Social Functioning Scale to evaluate each patient across 6 dimensions: social engagement, interpersonal ability, prosocial activities, recreation, independence-competence, and independence-performance. The Language Inquiry and Word Count (Pennebaker and Francis, 1996) was used to analyze patients' autobiographical accounts. A comparison between the first and second compilation of the Social Functioning Scale showed significant positive changes across the 6 social dimensions. The analysis of language in the narratives collected in the first and seventh meeting showed how inpatients passed from a narrative that was more centered on the memory of the past to a narrative that was more similar to a conversation and enriched with "insight" terms and the use of verbs in the conjunctive form. The authors interpret these outcomes as being consistent with the improvement that was observed in inpatients' social functioning.

Effectiveness of a participatory ergonomics intervention in improving communication and psychosocial exposures.

PubMed

Laing, A C; Cole, D C; Theberge, N; Wells, R P; Kerr, M S; Frazer, M B

2007-07-01

A participatory ergonomics programme was implemented in an automotive parts manufacturing factory in which an ergonomics change team was formed, composed of members from management, the organized labour union and the research team. It was hypothesized that the participatory nature of this change process would result in enhanced worker perceptions of workplace communication dynamics, decision latitude and influence, which in conjunction with anticipated mechanical exposure reductions would lead to reduced worker pain severity. Utilizing a sister plant in the corporation as a referent group, a quasi-experimental design was employed with a longitudinal, repeat questionnaire approach to document pre-post intervention changes. Nine participatory activities (psychosocial interventions) were implemented as part of the process. Communication dynamics regarding ergonomics were significantly enhanced at the intervention plant compared to the referent plant. However, there were no significantly different changes in worker perceptions of decision latitude or influence between the two plants, nor did pain severity change. Possible explanations for these results include limited intervention intensity, context and co-intervention differences between the two plants, high plant turnover reducing the statistical power of the study and lack of sensitivity and specificity in the psychosocial measures used. Further research should include the development of psychosocial tools more specific to participatory ergonomic interventions and the assessment of the extent of change in psychosocial factors that might be associated with improvements in pain.

Daily water level forecasting using wavelet decomposition and artificial intelligence techniques

NASA Astrophysics Data System (ADS)

Seo, Youngmin; Kim, Sungwon; Kisi, Ozgur; Singh, Vijay P.

2015-01-01

Reliable water level forecasting for reservoir inflow is essential for reservoir operation. The objective of this paper is to develop and apply two hybrid models for daily water level forecasting and investigate their accuracy. These two hybrid models are wavelet-based artificial neural network (WANN) and wavelet-based adaptive neuro-fuzzy inference system (WANFIS). Wavelet decomposition is employed to decompose an input time series into approximation and detail components. The decomposed time series are used as inputs to artificial neural networks (ANN) and adaptive neuro-fuzzy inference system (ANFIS) for WANN and WANFIS models, respectively. Based on statistical performance indexes, the WANN and WANFIS models are found to produce better efficiency than the ANN and ANFIS models. WANFIS7-sym10 yields the best performance among all other models. It is found that wavelet decomposition improves the accuracy of ANN and ANFIS. This study evaluates the accuracy of the WANN and WANFIS models for different mother wavelets, including Daubechies, Symmlet and Coiflet wavelets. It is found that the model performance is dependent on input sets and mother wavelets, and the wavelet decomposition using mother wavelet, db10, can further improve the efficiency of ANN and ANFIS models. Results obtained from this study indicate that the conjunction of wavelet decomposition and artificial intelligence models can be a useful tool for accurate forecasting daily water level and can yield better efficiency than the conventional forecasting models.

The efficacy of therapeutic ultrasound for rotator cuff tendinopathy: A systematic review and meta-analysis.

PubMed

Desmeules, François; Boudreault, Jennifer; Roy, Jean-Sébastien; Dionne, Clermont; Frémont, Pierre; MacDermid, Joy C

2015-08-01

A systematic review and meta-analysis on the efficacy of therapeutic ultrasound (US) in adults suffering from rotator cuff tendinopathy. A literature search was conducted in four databases for randomized controlled trials (RCT) published until 12/2013, comparing the efficacy of US to any other interventions in adults suffering from rotator cuff tendinopathy. The Cochrane Risk of Bias tool was used to evaluate the risk of bias of included studies. Data were summarized qualitatively or quantitatively. Eleven RCTs with a low mean methodological score (50.0% ± 15.6%) were included. Therapeutic US did not provide greater benefits than a placebo intervention or advice in terms of pain reduction and functional improvement. When provided in conjunction with exercise, US therapy is not superior to exercise alone in terms of pain reduction and functional improvement (pooled mean difference of the Constant-Murley score: -0.26 with 95% confidence interval of -3.84 to 3.32). Laser therapy was found superior to therapeutic US in terms of pain reduction. Based on low to moderate level evidence, therapeutic US does not provide any benefit compared to a placebo or advice, to laser therapy or when combined to exercise. More methodologically sound studies on the efficacy of therapeutic US are warranted. Copyright © 2014 Elsevier Ltd. All rights reserved.

Improving comprehension in adolescents with severe receptive language impairments: a randomized control trial of intervention for coordinating conjunctions.

PubMed

Ebbels, Susan H; Marić, Nataša; Murphy, Aoife; Turner, Gail

2014-01-01

Little evidence exists for the effectiveness of therapy for children with receptive language difficulties, particularly those whose difficulties are severe and persistent. To establish the effectiveness of explicit speech and language therapy with visual support for secondary school-aged children with language impairments focusing on comprehension of coordinating conjunctions in a randomized control trial with an assessor blind to group status. Fourteen participants (aged 11;3-16;1) with severe RELI (mean standard scores: CELF4 ELS = 48, CELF4 RLS = 53 and TROG-2 = 57), but higher non-verbal (Matrices = 83) and visual perceptual skills (Test of Visual Perceptual Skills (TVPS) = 86) were randomly assigned to two groups: therapy versus waiting controls. In Phase 1, the therapy group received eight 30-min individual sessions of explicit teaching with visual support (Shape Coding) with their usual SLT. In Phase 2, the waiting controls received the same therapy. The participants' comprehension was tested pre-, post-Phase 1 and post-Phase 2 therapy on (1) a specific test of the targeted conjunctions, (2) the TROG-2 and (3) a test of passives. After Phase 1, the therapy group showed significantly more progress than the waiting controls on the targeted conjunctions (d = 1.6) and overall TROG-2 standard score (d = 1.4). The two groups did not differ on the passives test. After Phase 2, the waiting controls made similar progress to those in the original therapy group, who maintained their previous progress. Neither group showed progress on passives. When the two groups were combined, significant progress was found on the specific conjunctions (d = 1.3) and TROG-2 raw (d = 1.1) and standard scores (d = 0.9). Correlations showed no measures taken (including Matrices and TVPS) correlated significantly with progress on the targeted conjunctions or the TROG-2. Four hours of Shape Coding therapy led to significant gains on comprehension of coordinating conjunctions which were maintained after 4 months. Given the significant progress at a group level and the lack of reliable predictors of progress, this approach could be offered to other children with similar difficulties to the participants. However, the intervention was delivered one-to-one by speech and language therapists, thus the effectiveness of this therapy method with other methods of delivery remains to be evaluated. © 2013 Royal College of Speech and Language Therapists.

The use of conjunctions by children with typical language development.

PubMed

Glória, Yasmin Alves Leão; Hanauer, Letícia Pessota; Wiethan, Fernanda Marafiga; Nóro, Letícia Arruda; Mota, Helena Bolli

2016-07-04

To investigate the use of conjunctions in the spontaneous speech of three years old children with typical language development, who live in Santa Maria - RS. 45 children, aged 3:0;0 - 3:11;29 (years:months;days) from the database of the Center for the Study of Language and Speech (CELF) participated of this study. The spontaneous speech of each child was transcribed and followed by analysis of the samples to identify the types of conjunctions for each age group. The samples were statistically analyzed using the R software that allowed the evaluation of the number and type of conjunctions used in each age group by comparing them with each other. The data indicated that the higher the age of the child, the greater the number of types of conjunctions used by them. The comparison between age groups showed significant differences when comparing the average number of conjunctions per age group, as well as for additive conjunctions and subordinating conjunctions. At age of three the children begin to develop the grammatical use of conjunctions, early appearing additive, adversative and explanatory coordinating conjunctions, and at 3:6 they are able to use the most complex conjunctions, as subordinating conjunctions.

Interactive-graphic flowpath plotting for turbine engines

NASA Technical Reports Server (NTRS)

Corban, R. R.

1981-01-01

An engine cycle program capable of simulating the design and off-design performance of arbitrary turbine engines, and a computer code which, when used in conjunction with the cycle code, can predict the weight of the engines are described. A graphics subroutine was added to the code to enable the engineer to visualize the designed engine with more clarity by producing an overall view of the designed engine for output on a graphics device using IBM-370 graphics subroutines. In addition, with the engine drawn on a graphics screen, the program allows for the interactive user to make changes to the inputs to the code for the engine to be redrawn and reweighed. These improvements allow better use of the code in conjunction with the engine program.

Toxicology in Addiction Medicine.

PubMed

Schwarz, Daniel A; George, M P; Bluth, Martin H

2016-12-01

Toxicology testing in addiction medicine varies across the spectrum, yet remains a powerful tool in monitoring addictive patients. There are many reference laboratories offering toxicology testing, and physicians should have some understanding of laboratory, methodology, testing portfolio, and customer support structure to aid them in selecting the best toxicology laboratory for their patients. Consultation with a clinical pathologist/toxicologist in conjunction with the consideration of monitoring large numbers of illicit and psychoactive drugs in the addictive patient may provide important clinical information for their treatment. Copyright © 2016 Elsevier Inc. All rights reserved.

Lifetime evaluation of large format CMOS mixed signal infrared devices

NASA Astrophysics Data System (ADS)

Linder, A.; Glines, Eddie

2015-09-01

New large scale foundry processes continue to produce reliable products. These new large scale devices continue to use industry best practice to screen for failure mechanisms and validate their long lifetime. The Failure-in-Time analysis in conjunction with foundry qualification information can be used to evaluate large format device lifetimes. This analysis is a helpful tool when zero failure life tests are typical. The reliability of the device is estimated by applying the failure rate to the use conditions. JEDEC publications continue to be the industry accepted methods.

Putting engineering back into protein engineering: bioinformatic approaches to catalyst design.

PubMed

Gustafsson, Claes; Govindarajan, Sridhar; Minshull, Jeremy

2003-08-01

Complex multivariate engineering problems are commonplace and not unique to protein engineering. Mathematical and data-mining tools developed in other fields of engineering have now been applied to analyze sequence-activity relationships of peptides and proteins and to assist in the design of proteins and peptides with specified properties. Decreasing costs of DNA sequencing in conjunction with methods to quickly synthesize statistically representative sets of proteins allow modern heuristic statistics to be applied to protein engineering. This provides an alternative approach to expensive assays or unreliable high-throughput surrogate screens.

Degradation Factor Approach for Impacted Composite Structural Assessment: MSFC Center Director's Discretionary Fund Final Report, Project No. 96-17

NASA Technical Reports Server (NTRS)

Ortega, R.; Price, J. M.; Fox, D.

2000-01-01

This technical memorandum documents the results of the research to develop a concept for assessing the structural integrity of impacted composite structures using the strength degradation factor in conjunction with available finite element tools. For this purpose, a literature search was conducted, a plan for conducting impact testing on two laminates was developed, and a finite element model of the impact process was created. Specimens for the impact testing were fabricated to support the impact testing plan.

On Animating 2D Velocity Fields

NASA Technical Reports Server (NTRS)

Kao, David; Pang, Alex; Yan, Jerry (Technical Monitor)

2001-01-01

A velocity field, even one that represents a steady state flow, implies a dynamical system. Animated velocity fields is an important tool in understanding such complex phenomena. This paper looks at a number of techniques that animate velocity fields and propose two new alternatives. These are texture advection and streamline cycling. The common theme among these techniques is the use of advection on some texture to generate a realistic animation of the velocity field. Texture synthesis and selection for these methods are presented. Strengths and weaknesses of the techniques are also discussed in conjunctions with several examples.

On Animating 2D Velocity Fields

NASA Technical Reports Server (NTRS)

Kao, David; Pang, Alex

2000-01-01

A velocity field. even one that represents a steady state flow implies a dynamical system. Animated velocity fields is an important tool in understanding such complex phenomena. This paper looks at a number of techniques that animate velocity fields and propose two new alternatives, These are texture advection and streamline cycling. The common theme among these techniques is the use of advection on some texture to generate a realistic animation of the velocity field. Texture synthesis and selection for these methods are presented. Strengths and weaknesses of the techniques are also discussed in conjunction with several examples.

Reducing software security risk through an integrated approach

NASA Technical Reports Server (NTRS)

Gilliam, D.; Powell, J.; Kelly, J.; Bishop, M.

2001-01-01

The fourth quarter delivery, FY'01 for this RTOP is a Property-Based Testing (PBT), 'Tester's Assistant' (TA). The TA tool is to be used to check compiled and pre-compiled code for potential security weaknesses that could be exploited by hackers. The TA Instrumenter, implemented mostly in C++ (with a small part in Java), parsels two types of files: Java and TASPEC. Security properties to be checked are written in TASPEC. The Instrumenter is used in conjunction with the Tester's Assistant Specification (TASpec)execution monitor to verify the security properties of a given program.

Rhinoplasty and the aesthetic of the smile.

PubMed

de Benito, J; Fernandez Sanza, I

1995-01-01

The resection of the columella and nasal depressor muscles is a simple operation to perform and one which allows an improvement in the facial physiognomy of many patients. This operation can be done alone or in conjunction with the classic rhinoplasty, thus achieving an improvement in the aesthetics of the smile. It has also been proved, contrary to common belief, that the action of these muscles has no connection with physiological breathing mechanisms.

The advantages of the high voltage solar array for electric propulsion

NASA Technical Reports Server (NTRS)

Sater, B. L.

1973-01-01

The high voltage solar array offers improvements in efficiency, weight, and reliability for the electric propulsion power system. Conventional power processes and problems associated with ion thruster operation using SERT 2 experience are discussed and the advantages of the HVSA concept for electric propulsion are presented. Tests conducted operating the SERT 2 thruster system in conjunction with HVSA are reported. Thruster operation was observed to be normal and in some respects improved.

Silane-Pyrolysis Reactor With Nonuniform Heating

NASA Technical Reports Server (NTRS)

Iya, Sridhar K.

1991-01-01

Improved reactor serves as last stage in system processing metallurgical-grade silicon feedstock into silicon powder of ultrahigh purity. Silane pyrolized to silicon powder and hydrogen gas via homogeneous decomposition reaction in free space. Features set of individually adjustable electrical heaters and purge flow of hydrogen to improve control of pyrolysis conditions. Power supplied to each heater set in conjunction with flow in reactor to obtain desired distribution of temperature as function of position along reactor.

A Massachusetts Career Education Staff Development Research Guide.

ERIC Educational Resources Information Center

Chase, Elizabeth C. R., Ed.; McLain, Thomas W., Ed.

Designed as a resource manual for use in conjunction with state and/or local level career education staff development training sessions, this handbook also provides local practitioners with information to develop new or improved career education programs. Chapter 1 overviews the concept, rationale, goals, and objectives of career education in…

APPLICATION OF A MICROSCALE EMISSION FACTOR MODEL FOR PARTICULATE MATTER (MICROFACPM) IN CONJUNCTION WITH CALINE4-MODEL

EPA Science Inventory

The United States Environmental Protection Agency's (EPA) National Exposure Research Laboratory is developing improved methods for modeling the pollutant sources through the air pathway to human exposure in significant microenvironments of exposure. As a part of this project, w...

Aviation Structural Mechanic H1 & C.

ERIC Educational Resources Information Center

Naval Education and Training Command, Pensacola, FL.

The rate training manual and nonresident career course presents materials for individualized study that will assist Aviation Structural Mechanics in Hydraulics (AMH) in meeting the occupational requirements of their rating. The study materials seek to improve job skills among Navy petty officers in conjunction with their on-the-job training as…

Analyzing Verbal and Nonverbal Classroom Communications.

ERIC Educational Resources Information Center

Heger, Herbert K.

The Miniaturized Interaction Analysis System (Mini-TIA) was developed to permit improved analysis of classroom communication in conjunction with video taping. Each of seven verbal event categories is subdivided into two categories according to the nature of the nonverbal events paralleling them. Integrated into the system are (1) defined verbal…

Distributed Learning Environment: Major Functions, Implementation, and Continuous Improvement.

ERIC Educational Resources Information Center

Converso, Judith A.; Schaffer, Scott P.; Guerra, Ingrid J.

The content of this paper is based on a development plan currently in design for the U.S. Navy in conjunction with the Learning Systems Institute at Florida State University. Leading research (literature review) references and case study ("best practice") references are presented as supporting evidence for the results-oriented…

Improving foundation design in rock : load test at Burma Road Overpass, final report, December 2009.

DOT National Transportation Integrated Search

2009-12-01

This report describes the results of a bi-directional load test on a drilled shaft foundation in weak sandstone. The test was conducted in : conjunction with construction of a new bridge at Burma Road Overpass on I-90 in Gillette, Wyoming. The purpos...

Controlled Trial Using Computerized Feedback to Improve Physicians' Diagnostic Judgments.

ERIC Educational Resources Information Center

Poses, Roy M.; And Others

1992-01-01

A study involving 14 experienced physicians investigated the effectiveness of a computer program (providing statistical feedback to teach a clinical diagnostic rule that predicts the probability of streptococcal pharyngitis), in conjunction with traditional lecture and periodic disease-prevalence reports. Results suggest the integrated method is a…

Techniques for Improving Cash Management.

ERIC Educational Resources Information Center

Lykins, Ronald G.

1973-01-01

This article deals with several techniques for regulating cash inflow and outflow and investing surplus cash for short periods of time. The techniques are: (1) consolidating checking accounts, (2) determining surplus cash by examining bank balances in conjunction with the cash book, (3) selecting a minimum bank balance, (4) investing a greater…

On the reality of the conjunction fallacy.

PubMed

Sides, Ashley; Osherson, Daniel; Bonini, Nicolao; Viale, Riccardo

2002-03-01

Attributing higher "probability" to a sentence of form p-and-q, relative to p, is a reasoning fallacy only if (1) the word probability carries its modern, technical meaning and (2) the sentence p is interpreted as a conjunct of the conjunction p-and-q. Legitimate doubts arise about both conditions in classic demonstrations of the conjunction fallacy. We used betting paradigms and unambiguously conjunctive statements to reduce these sources of ambiguity about conjunctive reasoning. Despite the precautions, conjunction fallacies were as frequent under betting instructions as under standard probability instructions.

Mineralisation of 2,4-dichlorophenoxyacetic acid by acoustic or hydrodynamic cavitation in conjunction with the advanced Fenton process.

PubMed

Bremner, David H; Carlo, Stefano Di; Chakinala, Anand G; Cravotto, Giancarlo

2008-04-01

The mineralisation of 2,4-dichlorophenoxyacetic acid (2,4-D) in the presence of zero-valent iron and hydrogen peroxide (the advanced Fenton process--AFP) whilst being subjected to acoustic or hydrodynamic cavitation is reported. If the reaction is merely stirred then there is 57% removal of TOC whilst on irradiation the figure is 64% although the latter reaction is more rapid. Use of ultrasound alone results in only 11% TOC removal in 60 min of treatment time. Addition of iron powder marginally enhances the extent of degradation but an appreciable increase is observed in the presence of hydrogen peroxide which acts as a source for hydroxyl radicals by Fenton chemistry as well as by dissociation in the presence of ultrasound. The use of hydrodynamic cavitation in conjunction with the advanced Fenton process has also been found to be a useful tool for continuous remediation of water contaminated with 2,4-D. After 20 min of treatment the residual TOC is reduced to 30% and this probably represents the remaining highly recalcitrant small organic molecules.

Atmospheric pressure chemical ionisation mass spectrometry analysis linked with chemometrics for food classification - a case study: geographical provenance and cultivar classification of monovarietal clarified apple juices.

PubMed

Gan, Heng-Hui; Soukoulis, Christos; Fisk, Ian

2014-03-01

In the present work, we have evaluated for first time the feasibility of APCI-MS volatile compound fingerprinting in conjunction with chemometrics (PLS-DA) as a new strategy for rapid and non-destructive food classification. For this purpose 202 clarified monovarietal juices extracted from apples differing in their botanical and geographical origin were used for evaluation of the performance of APCI-MS as a classification tool. For an independent test set PLS-DA analyses of pre-treated spectral data gave 100% and 94.2% correct classification rate for the classification by cultivar and geographical origin, respectively. Moreover, PLS-DA analysis of APCI-MS in conjunction with GC-MS data revealed that masses within the spectral ACPI-MS data set were related with parent ions or fragments of alkyesters, carbonyl compounds (hexanal, trans-2-hexenal) and alcohols (1-hexanol, 1-butanol, cis-3-hexenol) and had significant discriminating power both in terms of cultivar and geographical origin. Copyright © 2013 The Authors. Published by Elsevier Ltd.. All rights reserved.

The critical steps for successful research: The research proposal and scientific writing: (A report on the pre-conference workshop held in conjunction with the 64th annual conference of the Indian Pharmaceutical Congress-2012)

PubMed Central

Balakumar, Pitchai; Inamdar, Mohammed Naseeruddin; Jagadeesh, Gowraganahalli

2013-01-01

An interactive workshop on ‘The Critical Steps for Successful Research: The Research Proposal and Scientific Writing’ was conducted in conjunction with the 64th Annual Conference of the Indian Pharmaceutical Congress-2012 at Chennai, India. In essence, research is performed to enlighten our understanding of a contemporary issue relevant to the needs of society. To accomplish this, a researcher begins search for a novel topic based on purpose, creativity, critical thinking, and logic. This leads to the fundamental pieces of the research endeavor: Question, objective, hypothesis, experimental tools to test the hypothesis, methodology, and data analysis. When correctly performed, research should produce new knowledge. The four cornerstones of good research are the well-formulated protocol or proposal that is well executed, analyzed, discussed and concluded. This recent workshop educated researchers in the critical steps involved in the development of a scientific idea to its successful execution and eventual publication. PMID:23761709

The complexity of narrative interferes in the use of conjunctions in children with specific language impairment.

PubMed

Gonzalez, Deborah Oliveira; Cáceres, Ana Manhani; Bento-Gaz, Ana Carolina Paiva; Befi-Lopes, Debora Maria

2012-01-01

To verify the use of conjunctions in narratives, and to investigate the influence of stimuli's complexity over the type of conjunctions used by children with specific language impairment (SLI) and children with typical language development. Participants were 40 children (20 with typical language development and 20 with SLI) with ages between 7 and 10 years, paired by age range. Fifteen stories with increasing of complexity were used to obtain the narratives; stories were classified into mechanical, behavioral and intentional, and each of them was represented by four scenes. Narratives were analyzed according to occurrence and classification of conjunctions. Both groups used more coordinative than subordinate conjunctions, with significant decrease in the use of conjunctions in the discourse of SLI children. The use of conjunctions varied according to the type of narrative: for coordinative conjunctions, both groups differed only between intentional and behavioral narratives, with higher occurrence in behavioral ones; for subordinate conjunctions, typically developing children's performance did not show differences between narratives, while SLI children presented fewer occurrences in intentional narratives, which was different from other narratives. Both groups used more coordinative than subordinate conjunctions; however, typically developing children presented more conjunctions than SLI children. The production of children with SLI was influenced by stimulus, since more complex narratives has less use of subordinate conjunctions.

Impact of improved information on the structure of world grain trade. [wheat

NASA Technical Reports Server (NTRS)

1979-01-01

The benefits to be derived by the United States from improvements in global grain crop forecasting capability are discussed. The improvements in forecasting accuracy, which are a result of the use of satellite technology in conjunction with existing ground based estimating procedures are described. The degree of forecasting accuracy to be obtained from satellite technology is also examined. Specific emphasis is placed on wheat production in seven countries/regions: the United States; Canada; Argentina; Australia; Western Europe; the USSR; and all other countries in a group.

Improved Dual-Luciferase Reporter Assays for Nuclear Receptors

PubMed Central

Paguio, Aileen; Stecha, Pete; Wood, Keith V; Fan, Frank

2010-01-01

Nuclear receptors play important roles in many cellular functions through control of gene transcription. It is also a large target class for drug discovery. Luciferase reporter assays are frequently used to study nuclear receptor function because of their wide dynamic range, low endogenous activity, and ease of use. Recent improvements of luciferase genes and vectors have further enhanced their utilities. Here we applied these improvements to two reporter formats for studying nuclear receptors. The first assay contains a Murine Mammary Tumor Virus promoter upstream of a destabilized luciferase. The presence of response elements for nuclear hormone receptor in this promoter allows the studies of endogenous and/or exogenous full length receptors. The second assay contains a ligand binding domain (LBD) of a nuclear receptor fused to the GAL4 DNA binding domain (DBD) on one vector and multiple Gal4 Upstream Activator Sequences (UAS) upstream of luciferase reporter on another vector. We showed that codon optimization of luciferase reporter genes increased expression levels in conjunction with the incorporation of protein destabilizing sequences into luciferase led to a larger assay dynamic range in both formats. The optimum number of UAS to generate the best response was determined. The expression vector for nuclear receptor LBD/GAL4 DBD fusion also constitutively expresses a Renilla luciferase-neoR fusion protein, which provides selection capability (G418 resistance, neoR) as well as an internal control (Renilla luciferase). This dual-luciferase format allowed detecting compound cytotoxicity or off-target change in expression during drug screening, therefore improved data quality. These luciferase reporter assays provided better research and drug discovery tools for studying the functions of full length nuclear receptors and ligand binding domains. PMID:21687560

Effects of a cost-effective surgical workflow on cosmesis and patient's satisfaction in open thyroid surgery.

PubMed

Billmann, Franck; Bokor-Billmann, Therezia; Voigt, Joachim; Kiffner, Erhard

2013-01-01

In thyroid surgery, minimally invasive procedures are thought to improve cosmesis and patient's satisfaction. However, studies using standardized tools are scarce, and results are controversial. Moreover, minimally invasive techniques raise the question of material costs in a context of health spending cuts. The aim of the present study is to test a cost-effective surgical workflow to improve cosmesis in conventional open thyroid surgery. Our study ran between January 2009 and November 2010, and was based on a prospectively maintained thyroid surgery register. Patients operated for benign thyroid diseases were included. Since January 2010, a standardized surgical workflow was used in addition to the reference open procedure to improve the outcome. Two groups were created: (1) G1 group (patients operated with the reference technique), (2) G2 group (patients operated with our workflow in addition to reference technique). Patients were investigated for postoperative outcomes, self-evaluated body image, cosmetic and self-confidence scores. 820 patients were included in the present study. The overall body image and cosmetic scores were significantly better in the G2 group (P < 0.05). No significant difference was noted in terms of surgical outcomes, scar length, and self-confidence. Our surgical workflow in conjunction with the reference technique is safe and shows significant better results in terms of body image and cosmesis than do the reference technique alone. Thus, we recommend its implementation in order to improve outcomes in a cost-effective way. The limitations of the present study should be kept in mind in the elaboration of future studies. Copyright © 2012 Surgical Associates Ltd. Published by Elsevier Ltd. All rights reserved.

Mobile and Web Game Development: Using Videogames as an Educational and Outreach Tool

NASA Technical Reports Server (NTRS)

Jaime, Fernando I.

2012-01-01

Few tools reach out to capture the imagination and interests of children like video games do. As such, the development of educational applications that foster young minds' interest in science and technology become of the utmost importance. To this end, I spent my summer internship developing outreach and educational applications in conjunction with JPL's Space Place team. This small, but dedicated, team of people manages three NASA websites that focus on presenting science and technology information in such a manner that young children can understand it and develop an interest in the subjects. Besides the websites, with their plethora of educational content presented through hands-on activities, games and informative articles, the team also creates and coordinates the distribution of printed material to museums, astronomy clubs and a huge network of educators.

Hypersonic Vehicle Propulsion System Control Model Development Roadmap and Activities

NASA Technical Reports Server (NTRS)

Stueber, Thomas J.; Le, Dzu K.; Vrnak, Daniel R.

2009-01-01

The NASA Fundamental Aeronautics Program Hypersonic project is directed towards fundamental research for two classes of hypersonic vehicles: highly reliable reusable launch systems (HRRLS) and high-mass Mars entry systems (HMMES). The objective of the hypersonic guidance, navigation, and control (GN&C) discipline team is to develop advanced guidance and control algorithms to enable efficient and effective operation of these challenging vehicles. The ongoing work at the NASA Glenn Research Center supports the hypersonic GN&C effort in developing tools to aid the design of advanced control algorithms that specifically address the propulsion system of the HRRLSclass vehicles. These tools are being developed in conjunction with complementary research and development activities in hypersonic propulsion at Glenn and elsewhere. This report is focused on obtaining control-relevant dynamic models of an HRRLS-type hypersonic vehicle propulsion system.

Fully-Integrated Simulation of Conjunctive Use from Field to Basin Scales: Development of a Surface Water Operations Module for MODFLOW-OWHM

NASA Astrophysics Data System (ADS)

Ferguson, I. M.; Boyce, S. E.; Hanson, R. T.; Llewellyn, D.

2014-12-01

It is well established that groundwater pumping affects surface-water availability by intercepting groundwater that would otherwise discharge to streams and/or by increasing seepage from surface-water channels. Conversely, surface-water management operations effect groundwater availability by altering the timing, location, and quantity of groundwater recharge and demand. Successful conjunctive use may require analysis with an integrated approach that accounts for the many interactions and feedbacks between surface-water and groundwater availability and their joint management. In order to improve simulation and analysis of conjunctive use, Bureau of Reclamation and USGS are collaborating to develop a surface-water operations module within MODFLOW One Water Hydrologic Flow Model (MF-OWHM), a new version of the USGS Modular Groundwater Flow Model (MODFLOW). Here we describe the development and application of the surface-water operations module. We provide an overview of the conceptual approach used to simulate surface-water operations—including surface-water storage, allocation, release, diversion, and delivery on monthly to seasonal time frames—in a fully-integrated manner. We then present results from a recent case study analysis of the Rio Grande Project, a large-scale irrigation project located in New Mexico and Texas, under varying surface-water operations criteria and climate conditions. Case study results demonstrate the importance of integrated hydrologic simulation of surface water and groundwater operations in analysis and management of conjunctive-use systems.

Common genetic risk factors for coronary artery disease: new opportunities for prevention?

PubMed

Hamrefors, Viktor

2017-05-01

Atherosclerotic cardiovascular disease (CVD) is a leading cause of mortality and morbidity worldwide, with coronary artery disease (CAD) being the single leading cause of death. Better control of risk factors, enhanced diagnostic techniques and improved medical therapies have all substantially decreased the mortality of CAD in developed countries. However, CAD and other forms of atherosclerotic CVD are projected to remain the leading cause of death by 2030 and we face a number of challenges if the outcomes of CAD are to be further improved. The fact that a substantial fraction of high-risk subjects do not reach treatment goals for important risk factors is one of these challenges. At the same time, there is also a non-negotiable fraction of 'concealed' high-risk subjects who are not detected by current risk algorithms and diagnostic modalities. In recent years, we have started to rapidly increase our knowledge of the framework of common genetics underlying CAD and atherosclerotic CVD in the population. In conjunction with modern diagnostic and therapeutic options, this new genetic knowledge may provide a valuable tool for further improvements in prevention. This review summarizes the recent findings from the search for common genetic risk factors for CAD. Furthermore, the author discusses how such recent findings could potentially be used in a number of clinical applications within CAD prevention, including in clinical risk stratification, in prediction of drug treatment response and in the search for targets for novel preventive therapies. © 2015 Scandinavian Society of Clinical Physiology and Nuclear Medicine. Published by John Wiley & Sons Ltd.

An electrospun polydioxanone patch for the localisation of biological therapies during tendon repair.

PubMed

Hakimi, O; Murphy, R; Stachewicz, U; Hislop, S; Carr, A J

2012-10-23

Rotator cuff tendon pathology is thought to account for 30-70 % of all shoulder pain. For cases that have failed conservative treatment, surgical re-attachment of the tendon to the bone with a non-absorbable suture is a common option. However, the failure rate of these repairs is high, estimated at up to 75 %. Studies have shown that in late disease stages the tendon itself is extremely degenerate, with reduced cell numbers and poor matrix organisation. Thus, it has been suggested that adding biological factors such as platelet rich plasma (PRP) and mesenchymal stem cells could improve healing. However, the articular capsule of the glenohumeral joint and the subacromial bursa are large spaces, and injecting beneficial factors into these sites does not ensure localisation to the area of tendon damage. Thus, the aim of this study was to develop a biocompatible patch for improving the healing rates of rotator cuff repairs. The patch will create a confinement around the repair area and will be used to guide injections to the vicinity of the surgical repair. Here, we characterised and tested a preliminary prototype of the patch utilising in vitro tools and primary tendon-derived cells, showing exceptional biocompatibility despite rapid degradation, improved cell attachment and that cells could migrate across the patch towards a chemo-attractant. Finally, we showed the feasibility of detecting the patch using ultrasound and injecting liquid into the confinement ex vivo. There is a potential for using this scaffold in the surgical repair of interfaces such as the tendon insertion in the rotator cuff, in conjunction with beneficial factors.

Electromagnetic Launch Technology Assessment. Scientific Basis and Unified Treatment: Forces and Electromechanical Power Conversion (Analytical and Numerical Methods),

DTIC Science & Technology

1990-06-01

on simple railgun accelerators andI homopolar generators. Complex rotating flux compressors would drastically improve the performance of EM launchers...velocities. If this is the direction of improvement, then energies stored in the electric trains built with linear electric motors in Japan and Western I...laboratories which had power supplies 3 already built for other programs ( homopolar generators in conjunction with an inductor and an opening switch

Effect of the atmosphere on the classification of LANDSAT data. [Identifying sugar canes in Brazil

NASA Technical Reports Server (NTRS)

Dejesusparada, N. (Principal Investigator); Morimoto, T.; Kumar, R.; Molion, L. C. B.

1979-01-01

The author has identified the following significant results. In conjunction with Turner's model for the correction of satellite data for atmospheric interference, the LOWTRAN-3 computer was used to calculate the atmospheric interference. Use of the program improved the contrast between different natural targets in the MSS LANDSAT data of Brasilia, Brazil. The classification accuracy of sugar canes was improved by about 9% in the multispectral data of Ribeirao Preto, Sao Paulo.

Testing boundary conditions for the conjunction fallacy: effects of response mode, conceptual focus, and problem type.

PubMed

Wedell, Douglas H; Moro, Rodrigo

2008-04-01

Two experiments used within-subject designs to examine how conjunction errors depend on the use of (1) choice versus estimation tasks, (2) probability versus frequency language, and (3) conjunctions of two likely events versus conjunctions of likely and unlikely events. All problems included a three-option format verified to minimize misinterpretation of the base event. In both experiments, conjunction errors were reduced when likely events were conjoined. Conjunction errors were also reduced for estimations compared with choices, with this reduction greater for likely conjuncts, an interaction effect. Shifting conceptual focus from probabilities to frequencies did not affect conjunction error rates. Analyses of numerical estimates for a subset of the problems provided support for the use of three general models by participants for generating estimates. Strikingly, the order in which the two tasks were carried out did not affect the pattern of results, supporting the idea that the mode of responding strongly determines the mode of thinking about conjunctions and hence the occurrence of the conjunction fallacy. These findings were evaluated in terms of implications for rationality of human judgment and reasoning.

On the determinants of the conjunction fallacy: probability versus inductive confirmation.

PubMed

Tentori, Katya; Crupi, Vincenzo; Russo, Selena

2013-02-01

Major recent interpretations of the conjunction fallacy postulate that people assess the probability of a conjunction according to (non-normative) averaging rules as applied to the constituents' probabilities or represent the conjunction fallacy as an effect of random error in the judgment process. In the present contribution, we contrast such accounts with a different reading of the phenomenon based on the notion of inductive confirmation as defined by contemporary Bayesian theorists. Averaging rule hypotheses along with the random error model and many other existing proposals are shown to all imply that conjunction fallacy rates would rise as the perceived probability of the added conjunct does. By contrast, our account predicts that the conjunction fallacy depends on the added conjunct being perceived as inductively confirmed. Four studies are reported in which the judged probability versus confirmation of the added conjunct have been systematically manipulated and dissociated. The results consistently favor a confirmation-theoretic account of the conjunction fallacy against competing views. Our proposal is also discussed in connection with related issues in the study of human inductive reasoning. 2013 APA, all rights reserved

An Evaluation of Operational Airspace Sectorization Integrated System (OASIS) Advisory Tool

NASA Technical Reports Server (NTRS)

Lee, Paul U.; Mogford, Richard H.; Bridges, Wayne; Buckley, Nathan; Evans, Mark; Gujral, Vimmy; Lee, Hwasoo; Peknik, Daniel; Preston, William

2013-01-01

In January 2013, a human-in-the-loop evaluation of the Operational Airspace Sectorization Integrated System (OASIS) was conducted in the Airspace Operations Laboratory of the Human Systems Integration Division (Code TH) in conjunction with the Aviation Systems Division (Code AF). The development of OASIS is a major activity of the Dynamic Airspace Configuration (DAC) research focus area within the Aeronautics Research Mission Directorate (ARMD) Airspace Systems Program. OASIS is an advisory tool to assist Federal Aviation Administration (FAA) En Route Area Supervisors in their planning of sector combinedecombine operations as well as opening closing of Data-side (D-side) control positions. These advisory solutions are tailored to the predicted traffic demand over the next few hours. During the experiment, eight retired FAA personnel served as participants for a part-task evaluation of OASIS functionality, covering the user interface as well as the underlying algorithm. Participants gave positive feedback on both the user interface and the algorithm solutions for airspace configuration, including an excellent average rating of 94 on the tool usability scales. They also suggested various enhancements to the OASIS tool, which will be incorporated into the next tool development cycle for the full-scale human-in-the-loop evaluation to be conducted later this year.

Improving outcomes using German Inpatient Quality Indicators in conjunction with peer review procedures.

PubMed

Mansky, Thomas; Völzke, Tatjana; Nimptsch, Ulrike

2015-01-01

Some hospital comparisons seem to generate confusion because different methods of outcome comparisons lead to different results in hospital rankings. This article questions the concept of overall comparisons of hospitals, which are multiproduct enterprises and may have specialties that provide good results in some areas despite having worse outcomes in others. Therefore, the authors argue for a disease specific view of outcome measurement. The concept of the German Inpatient Quality Indicators is explained. These indicators cover volume, mortality, and other information by a disease specific approach, which includes information for potential patients as well as specific feedback to the physicians responsible for the respective specialty. This article focuses on the feedback to the hospitals and explains how these indicators can be used for improvement in conjunction with a peer review process. The indicators provide information to the hospitals regarding their relative position because German reference values are available for all indicators. Thus, the indicators can serve as a trigger instrument for identifying possible quality problems. Based on these indications, peer review can be used to analyze the treatment processes and to eventually verify weaknesses and define actions for improvement. The first studies indicate that the use of this approach within hospital quality management can largely improve hospital outcomes in hospitals with subpar results compared to the German average. Copyright © 2015. Published by Elsevier GmbH.

Evaluation of medical management during a mass casualty incident exercise: an objective assessment tool to enhance direct observation.

PubMed

Ingrassia, Pier Luigi; Prato, Federico; Geddo, Alessandro; Colombo, Davide; Tengattini, Marco; Calligaro, Sara; La Mura, Fabrizio; Franc, Jeffrey Michael; Della Corte, Francesco

2010-11-01

Functional exercises represent an important link between disaster planning and disaster response. Although these exercises are widely performed, no standardized method exists for their evaluation. To describe a simple and objective method to assess medical performance during functional exercise events. An evaluation tool comprising three data fields (triage, clinical maneuvers, and radio usage), accompanied by direct anecdotal observational methods, was used to evaluate a large functional mass casualty incident exercise. Seventeen medical responders managed 112 victims of a simulated building explosion. Although 81% of the patients were assigned the appropriate triage codes, evacuation from the site did not follow in priority. Required maneuvers were performed correctly in 85.2% of airway maneuvers and 78.7% of breathing maneuvers, however, significant under-treatment occurred, possibly due to equipment shortages. Extensive use of radio communication was documented. In evaluating this tool, the structured markers were informative, but further information provided by direct observation was invaluable. A three-part tool (triage, medical maneuvers, and radio usage) can provide a method to evaluate functional mass casualty incident exercises, and is easily implemented. For the best results, it should be used in conjunction with direct observation. The evaluation tool has great potential as a reproducible and internationally recognized tool for evaluating disaster management exercises. Copyright © 2010 Elsevier Inc. All rights reserved.

Training Tools for Nontechnical Skills for Surgeons-A Systematic Review.

PubMed

Wood, Thomas Charles; Raison, Nicholas; Haldar, Shreya; Brunckhorst, Oliver; McIlhenny, Craig; Dasgupta, Prokar; Ahmed, Kamran

Development of nontechnical skills for surgeons has been recognized as an important factor in surgical care. Training tools for this specific domain are being created and validated to maximize the surgeon's nontechnical ability. This systematic review aims to outline, address, and recommend these training tools. A full and comprehensive literature search, using a systematic format, was performed on ScienceDirect and PubMed, with data extraction occurring in line with specified inclusion criteria. Systematic review was performed fully at King's College London. A total of 84 heterogeneous articles were used in this review. Further, 23 training tools including scoring systems, training programs, and mixtures of the two for a range of specialities were identified in the literature. Most can be applied to surgery overall, although some tools target specific specialities (such as neurosurgery). Interrater reliability, construct, content, and face validation statuses were variable according to the specific tool in question. Study results pertaining to nontechnical skill training tools have thus far been universally positive, but further studies are required for those more recently developed and less extensively used tools. Recommendations can be made for individual training tools based on their level of validation and for their target audience. Based on the number of studies performed and their status of validity, NOTSS and Oxford NOTECHS II can be considered the gold standard for individual- and team-based nontechnical skills training, respectively, especially when used in conjunction with a training program. Copyright © 2017 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Screening of female family members of von Willebrand disease patients: utility of a modified screening tool in a high-risk population.

PubMed

Faiz, A S; Kaveney, A; Guo, S; Murphy, S; Philipp, C S

2017-09-01

Family members of Von Willebrand disease (VWD) patients may have low levels of VWF without major bleeding episodes and often remain undiagnosed. The purpose of this study was to assess the utility of a modified Screening Tool in identifying previously untested reproductive age female family members of VWD patients for haemostatic evaluation. Ninety-four reproductive age women including 41 previously untested family members of VWD patients, 26 previously diagnosed VWD patients and 27 healthy controls were administered a modified Screening Tool and had blood drawn for CBC, ferritin, and VWF testing. Participants completed a pictorial blood assessment chart (PBAC) with menses. The modified Screening Tool was positive in 32% family members, 77% VWD patients, and 19% controls (P < 0.001). Combined with low ferritin, the modified Screening Tool was positive in 66% family members, 92% VWD patients, and 44% controls (P = 0.001). In family members, incorporating low ferritin with the modified Screening Tool resulted in a sensitivity of 86% (95% CI, 42-100) and negative predictive value of 93% (95% CI, 66-100). In the control group, NPV was between 92% and 95% for the modified Screening Tool and also for the modified Screening Tool combined with low ferritin or a positive PBAC. These data in a racially diverse population suggest the usefulness of a simple, easy to administer modified Screening Tool. In conjunction with ferritin it could be used in a primary care setting to stratify reproductive age women with a family history of VWD for haemostatic evaluation. © 2017 John Wiley & Sons Ltd.

Global Health Security Agenda: Joint External Evaluation and Legislation-A 1-Year Review.

PubMed

Forzley, Michele

In 2014, the IHR Review Committee recommended moving from exclusive self-evaluation to a combination of domestic and independent experts and began the process in conjunction with stakeholders to develop the Joint External Evaluation tool. The tool was launched in February 2016, and at the 2016 WHA, the IHR Review Committee recommended that all states parties should undertake assessments of their core capacities using the JEE tool and results of other evaluation processes such as the OIE PVS. A goal was set to conduct 50 country JEE assessments prior to WHA 2017. It is notable that legislation was added as a separate element of the JEE tool coupled with 2 indicators. Given the importance of law to the development discourse today, more needs to be done with the JEE with regards to legislation for the benefits of the law to be realized in global health security and overall in health outcomes. As we are at the 1-year anniversary of the tool, and WHO has begun a review of the JEE tool and requests for feedback are circulating, this article focuses on the JEE element of legislation and proposes some simple and substantive fixes. Considering the importance of law in the context of the GHSA, the results of the JEE tool are reviewed, and, drawing on the author's experience with the tool and other IHR and GHSA legal assessments, a case is made for a significant revision of the tool section on legislation and the manner in which the subject of legislation is integrated during the evaluation process.

MITHRA 1.0: A full-wave simulation tool for free electron lasers

NASA Astrophysics Data System (ADS)

Fallahi, Arya; Yahaghi, Alireza; Kärtner, Franz X.

2018-07-01

Free Electron Lasers (FELs) are a solution for providing intense, coherent and bright radiation in the hard X-ray regime. Due to the low wall-plug efficiency of FEL facilities, it is crucial and additionally very useful to develop complete and accurate simulation tools for better optimizing a FEL interaction. The highly sophisticated dynamics involved in a FEL process was the main obstacle hindering the development of general simulation tools for this problem. We present a numerical algorithm based on finite difference time domain/Particle in cell (FDTD/PIC) in a Lorentz boosted coordinate system which is able to fulfill a full-wave simulation of a FEL process. The developed software offers a suitable tool for the analysis of FEL interactions without considering any of the usual approximations. A coordinate transformation to bunch rest frame makes the very different length scales of bunch size, optical wavelengths and the undulator period transform to values with the same order. Consequently, FDTD/PIC simulations in conjunction with efficient parallelization techniques make the full-wave simulation feasible using the available computational resources. Several examples of free electron lasers are analyzed using the developed software, the results are benchmarked based on standard FEL codes and discussed in detail.

Adjustable-Viewing-Angle Endoscopic Tool for Skull Base and Brain Surgery

NASA Technical Reports Server (NTRS)

Bae, Youngsam; Liao, Anna; Manohara, Harish; Shahinian, Hrayr

2008-01-01

The term Multi-Angle and Rear Viewing Endoscopic tooL (MARVEL) denotes an auxiliary endoscope, now undergoing development, that a surgeon would use in conjunction with a conventional endoscope to obtain additional perspective. The role of the MARVEL in endoscopic brain surgery would be similar to the role of a mouth mirror in dentistry. Such a tool is potentially useful for in-situ planetary geology applications for the close-up imaging of unexposed rock surfaces in cracks or those not in the direct line of sight. A conventional endoscope provides mostly a frontal view that is, a view along its longitudinal axis and, hence, along a straight line extending from an opening through which it is inserted. The MARVEL could be inserted through the same opening as that of the conventional endoscope, but could be adjusted to provide a view from almost any desired angle. The MARVEL camera image would be displayed, on the same monitor as that of the conventional endoscopic image, as an inset within the conventional endoscopic image. For example, while viewing a tumor from the front in the conventional endoscopic image, the surgeon could simultaneously view the tumor from the side or the rear in the MARVEL image, and could thereby gain additional visual cues that would aid in precise three-dimensional positioning of surgical tools to excise the tumor. Indeed, a side or rear view through the MARVEL could be essential in a case in which the object of surgical interest was not visible from the front. The conceptual design of the MARVEL exploits the surgeon s familiarity with endoscopic surgical tools. The MARVEL would include a miniature electronic camera and miniature radio transmitter mounted on the tip of a surgical tool derived from an endo-scissor (see figure). The inclusion of the radio transmitter would eliminate the need for wires, which could interfere with manipulation of this and other surgical tools. The handgrip of the tool would be connected to a linkage similar to that of an endo-scissor, but the linkage would be configured to enable adjustment of the camera angle instead of actuation of a scissor blade. It is envisioned that thicknesses of the tool shaft and the camera would be less than 4 mm, so that the camera-tipped tool could be swiftly inserted and withdrawn through a dime-size opening. Electronic cameras having dimensions of the order of millimeters are already commercially available, but their designs are not optimized for use in endoscopic brain surgery. The variety of potential endoscopic, thoracoscopic, and laparoscopic applications can be expected to increase as further development of electronic cameras yields further miniaturization and improvements in imaging performance.

LaboREM--A Remote Laboratory for Game-Like Training in Electronics

ERIC Educational Resources Information Center

Luthon, Franck; Larroque, Benoît

2015-01-01

The advances in communication networks and web technologies, in conjunction with the improved connectivity of test and measurement devices make it possible to implement e-learning applications that encompass the whole learning process. In the field of electrical engineering, automation or mechatronics, it means not only lectures, tutorials, demos…

Effectiveness of a Low-Cost, Graduate Student-Led Intervention on Study Habits and Performance in Introductory Biology

ERIC Educational Resources Information Center

Hoskins, Tyler D.; Gantz, J. D.; Chaffee, Blake R.; Arlinghaus, Kel; Wiebler, James; Hughes, Michael; Fernandes, Joyce J.

2017-01-01

Institutions have developed diverse approaches that vary in effectiveness and cost to improve student performance in introductory science, technology, engineering, and mathematics courses. We developed a low-cost, graduate student-led, metacognition-based study skills course taught in conjunction with the introductory biology series at Miami…

Improving Comprehension in Adolescents with Severe Receptive Language Impairments: A Randomized Control Trial of Intervention for Coordinating Conjunctions

ERIC Educational Resources Information Center

Ebbels, Susan H.; Maric, Nataša; Murphy, Aoife; Turner, Gail

2014-01-01

Background: Little evidence exists for the effectiveness of therapy for children with receptive language difficulties, particularly those whose difficulties are severe and persistent. Aims: To establish the effectiveness of explicit speech and language therapy with visual support for secondary school-aged children with language impairments…

Using Critical Appraisal to Inform Program Improvement

ERIC Educational Resources Information Center

Esterlund, Theresa; Krantz, Amanda; Sigmond, Catherine

2017-01-01

In 2016, the education department at the National Building Museum offered a series of Late Night programs in conjunction with the Summer Block Party installation, ICEBERGS. The museum wanted to evaluate the programs but had limited resources to do so. In the following article, we describe the use of critical appraisal, an economic method applied…

Improving the Durability of Methanol Oxidation Reaction Electro-Catalysts Through the Modification of Carbon Architectures

DTIC Science & Technology

2014-01-01

zeolite template was used in conjunction with liquid cyanamide to form a carbon nitride structure with a better 2D mesoporous hexagonal framework, resulting...the core. Both hybrid inorganic–organic polymer networks and 139 zeolitic inorganic–organic polymer electrolyte materials were used to impregnate an

Anesthetic Efficacy of Meperidine in Teeth With Symptomatic Irreversible Pulpitis

PubMed Central

Mohajeri, Ladan; Salehi, Farnaz; Mehrvarzfar, Payman; Arfaee, Hamide; Bohluli, Behnam; Hamedy, Reza

2015-01-01

Achieving adequate pulpal anesthesia in mandibular teeth is always a challenge. Supplementary injections and using drugs in combination are some methods implemented to overcome this hurdle. In this randomized clinical trial, use of meperidine in conjunction with lidocaine in intraligamentary injection did not exhibit significant improvement in anesthesia. PMID:25849469

Environmental Assessment for Capital Improvement Projects, Buckley Air Force Base, Colorado. Volume 1 of 2

DTIC Science & Technology

2006-03-01

impact on the ambient soundscape . The attenuation of noise over the distance and topography between the two sites would minimize this potential...cumulative increase in impacts to the regional soundscape in conjunction with other plans and projects. However, the attenuation of sound over distance and

EFFECTS OF METHYLMERCURY ON REPRODUCTION IN AMERICAN KESTRELS AND COMPARISON TO EFFECTS OBSERVED IN OTHER AVIAN SPECIES

EPA Science Inventory

A study of the effects of methylmercury on reproduction in American kestrels was conducted in conjunction with the USGS Patuxent Wildlife Research Center as part of a larger project to improve our understanding of the effects of mercury exposure in the environment to avian popula...

Office-based Autologous Fat Injection Laryngoplasty for Vocal Process Granuloma.

PubMed

Hu, Hao-Chun; Hung, Yi-Ting; Lin, Shu-Yi; Chang, Shyue-Yih

2016-11-01

To present the outcomes of office-based autologous fat injection laryngoplasty for the treatment of vocal process granuloma in conjunction with glottic insufficiency. Retrospective chart review. This study included nine patients with vocal process granuloma in conjunction with glottic insufficiency who received autologous fat injection laryngoplasty. Videolaryngostroboscopic data, objective voice assessment, perceptual measurements of vocal quality, and subjective ratings of voice quality were examined before and after treatment. Of the nine patients, seven (78%) exhibited complete remission. The other two patients (22%) exhibited a partial response following the injection. In a subgroup of five patients who were refractory to antireflux and voice therapies, the resolution rate was 60%. Phonatory function presented significant improvements in jitter, noise-to-harmonic ratio, maximal phonation time, and asthenia. Videolaryngostroboscopic rating revealed significant improvements in closure phase ratio in the vibratory cycle. Autologous fat injection laryngoplasty can ameliorate glottic insufficiency and the resulting hyperfunctional behavior of the larynx. This therapy also encourages remission of vocal process granuloma and may represent an alternative treatment strategy. Copyright © 2016 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

A Novel Multilevel-SVD Method to Improve Multistep Ahead Forecasting in Traffic Accidents Domain.

PubMed

Barba, Lida; Rodríguez, Nibaldo

2017-01-01

Here is proposed a novel method for decomposing a nonstationary time series in components of low and high frequency. The method is based on Multilevel Singular Value Decomposition (MSVD) of a Hankel matrix. The decomposition is used to improve the forecasting accuracy of Multiple Input Multiple Output (MIMO) linear and nonlinear models. Three time series coming from traffic accidents domain are used. They represent the number of persons with injuries in traffic accidents of Santiago, Chile. The data were continuously collected by the Chilean Police and were weekly sampled from 2000:1 to 2014:12. The performance of MSVD is compared with the decomposition in components of low and high frequency of a commonly accepted method based on Stationary Wavelet Transform (SWT). SWT in conjunction with the Autoregressive model (SWT + MIMO-AR) and SWT in conjunction with an Autoregressive Neural Network (SWT + MIMO-ANN) were evaluated. The empirical results have shown that the best accuracy was achieved by the forecasting model based on the proposed decomposition method MSVD, in comparison with the forecasting models based on SWT.

A Novel Multilevel-SVD Method to Improve Multistep Ahead Forecasting in Traffic Accidents Domain

PubMed Central

Rodríguez, Nibaldo

2017-01-01

Here is proposed a novel method for decomposing a nonstationary time series in components of low and high frequency. The method is based on Multilevel Singular Value Decomposition (MSVD) of a Hankel matrix. The decomposition is used to improve the forecasting accuracy of Multiple Input Multiple Output (MIMO) linear and nonlinear models. Three time series coming from traffic accidents domain are used. They represent the number of persons with injuries in traffic accidents of Santiago, Chile. The data were continuously collected by the Chilean Police and were weekly sampled from 2000:1 to 2014:12. The performance of MSVD is compared with the decomposition in components of low and high frequency of a commonly accepted method based on Stationary Wavelet Transform (SWT). SWT in conjunction with the Autoregressive model (SWT + MIMO-AR) and SWT in conjunction with an Autoregressive Neural Network (SWT + MIMO-ANN) were evaluated. The empirical results have shown that the best accuracy was achieved by the forecasting model based on the proposed decomposition method MSVD, in comparison with the forecasting models based on SWT. PMID:28261267

Singularity-driven second- and third-harmonic generation at {epsilon}-near-zero crossing points

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vincenti, M. A.; Ceglia, D. de; Ciattoni, A.

We show an alternative path to efficient second- and third-harmonic generation in proximity of the zero crossing points of the dielectric permittivity in conjunction with low absorption. Under these circumstances, any material, either natural or artificial, will show similar degrees of field enhancement followed by strong harmonic generation, without resorting to any resonant mechanism. The results presented in this paper provide a general demonstration of the potential that the zero-crossing-point condition holds for nonlinear optical phenomena. We investigate a generic Lorentz medium and demonstrate that a singularity-driven enhancement of the electric field may be achieved even in extremely thin layersmore » of material. We also discuss the role of nonlinear surface sources in a realistic scenario where a 20-nm layer of CaF{sub 2} is excited at 21 {mu}m, where {epsilon}{approx} 0. Finally, we show similar behavior in an artificial composite material that includes absorbing dyes in the visible range, provide a general tool for the improvement of harmonic generation using the {epsilon}{approx} 0 condition, and illustrate that this singularity-driven enhancement of the field lowers the thresholds for a plethora of nonlinear optical phenomena.« less

OpenMP Parallelization and Optimization of Graph-Based Machine Learning Algorithms

DOE PAGES

Meng, Zhaoyi; Koniges, Alice; He, Yun Helen; ...

2016-09-21

In this paper, we investigate the OpenMP parallelization and optimization of two novel data classification algorithms. The new algorithms are based on graph and PDE solution techniques and provide significant accuracy and performance advantages over traditional data classification algorithms in serial mode. The methods leverage the Nystrom extension to calculate eigenvalue/eigenvectors of the graph Laplacian and this is a self-contained module that can be used in conjunction with other graph-Laplacian based methods such as spectral clustering. We use performance tools to collect the hotspots and memory access of the serial codes and use OpenMP as the parallelization language to parallelizemore » the most time-consuming parts. Where possible, we also use library routines. We then optimize the OpenMP implementations and detail the performance on traditional supercomputer nodes (in our case a Cray XC30), and test the optimization steps on emerging testbed systems based on Intel’s Knights Corner and Landing processors. We show both performance improvement and strong scaling behavior. Finally, a large number of optimization techniques and analyses are necessary before the algorithm reaches almost ideal scaling.« less

Variable Selection with Prior Information for Generalized Linear Models via the Prior LASSO Method.

PubMed

Jiang, Yuan; He, Yunxiao; Zhang, Heping

LASSO is a popular statistical tool often used in conjunction with generalized linear models that can simultaneously select variables and estimate parameters. When there are many variables of interest, as in current biological and biomedical studies, the power of LASSO can be limited. Fortunately, so much biological and biomedical data have been collected and they may contain useful information about the importance of certain variables. This paper proposes an extension of LASSO, namely, prior LASSO (pLASSO), to incorporate that prior information into penalized generalized linear models. The goal is achieved by adding in the LASSO criterion function an additional measure of the discrepancy between the prior information and the model. For linear regression, the whole solution path of the pLASSO estimator can be found with a procedure similar to the Least Angle Regression (LARS). Asymptotic theories and simulation results show that pLASSO provides significant improvement over LASSO when the prior information is relatively accurate. When the prior information is less reliable, pLASSO shows great robustness to the misspecification. We illustrate the application of pLASSO using a real data set from a genome-wide association study.

Improved Modeling Tools Development for High Penetration Solar

DOE Office of Scientific and Technical Information (OSTI.GOV)

Washom, Byron; Meagher, Kevin

2014-12-11

One of the significant objectives of the High Penetration solar research is to help the DOE understand, anticipate, and minimize grid operation impacts as more solar resources are added to the electric power system. For Task 2.2, an effective, reliable approach to predicting solar energy availability for energy generation forecasts using the University of California, San Diego (UCSD) Sky Imager technology has been demonstrated. Granular cloud and ramp forecasts for the next 5 to 20 minutes over an area of 10 square miles were developed. Sky images taken every 30 seconds are processed to determine cloud locations and cloud motionmore » vectors yielding future cloud shadow locations respective to distributed generation or utility solar power plants in the area. The performance of the method depends on cloud characteristics. On days with more advective cloud conditions, the developed method outperforms persistence forecasts by up to 30% (based on mean absolute error). On days with dynamic conditions, the method performs worse than persistence. Sky Imagers hold promise for ramp forecasting and ramp mitigation in conjunction with inverter controls and energy storage. The pre-commercial Sky Imager solar forecasting algorithm was documented with licensing information and was a Sunshot website highlight.« less

Innovation, engagement and development: moving forward in health information settings.

PubMed

Spring, Hannah

2018-06-08

The current trends influencing change in health information and library settings are presenting some exciting new opportunities for health information specialists. Increasingly, knowledge specialists are playing a pivotal role in the effective mobilisation of knowledge and evidence. The focus for our profession will continue to be on demonstrating the value and impact of our services, but a shift in expectations about how those services are delivered will need to be underpinned by new tools and skill sets. These issues are reflected in the themes of the Health Libraries Group 2018 conference, and in conjunction with the event, this virtual issue draws together a collection of articles reflecting those themes. Topics covered in the virtual issue include the following: Toolkits, online systems and emergent technologies to support health information practice; Continuing professional development; Community projects, engagement, outreach and public health; Value and impact and evidence-based practice; Service improvement and library management; and Digital and health literacy. The papers selected for this issue provide some excellent examples of how we, as a profession, are initiating change in creative ways and rising to the exciting challenges of the future. © 2018 Health Libraries Group.

Lessons learned: a "homeless shelter intervention" by a medical student.

PubMed

Owusu, Yasmin; Kunik, Mark; Coverdale, John; Shah, Asim; Primm, Annelle; Harris, Toi

2012-05-01

The authors explored the process of implementing a medical student-initiated program designed to provide computerized mental health screening, referral, and education in a homeless shelter. An educational program was designed to teach homeless shelter staff about psychiatric disorders and culturally-informed treatment strategies. Pre- and post-questionnaires were obtained in conjunction with the educational program involving seven volunteer shelter staff. A computerized mental health screening tool, Quick Psycho-Diagnostics Panel (QPD), was utilized to screen for the presence of nine psychiatric disorders in 19 volunteer homeless shelter residents. Shelter staffs' overall fund of knowledge improved by an average of 23% on the basis of pre-/post-questionnaires (p=0.005). Of the individuals who participated in the mental health screening, 68% screened positive for at least one psychiatric disorder and were referred for further mental health care. At the 3-month follow-up of these individuals, 46% of those referred had accessed their referral services as recommended. Medical student-initiated psychiatric outreach programs to the homeless community have the potential to reduce mental health disparities by both increasing access to mental health services and by providing education. The authors discuss educational challenges and benefits for the medical students involved in this project.

The use of 'Omics technology to rationally improve industrial mammalian cell line performance.

PubMed

Lewis, Amanda M; Abu-Absi, Nicholas R; Borys, Michael C; Li, Zheng Jian

2016-01-01

Biologics represent an increasingly important class of therapeutics, with 7 of the 10 top selling drugs from 2013 being in this class. Furthermore, health authority approval of biologics in the immuno-oncology space is expected to transform treatment of patients with debilitating and deadly diseases. The growing importance of biologics in the healthcare field has also resulted in the recent approvals of several biosimilars. These recent developments, combined with pressure to provide treatments at lower costs to payers, are resulting in increasing need for the industry to quickly and efficiently develop high yielding, robust processes for the manufacture of biologics with the ability to control quality attributes within narrow distributions. Achieving this level of manufacturing efficiency and the ability to design processes capable of regulating growth, death and other cellular pathways through manipulation of media, feeding strategies, and other process parameters will undoubtedly be facilitated through systems biology tools generated in academic and public research communities. Here we discuss the intersection of systems biology, 'Omics technologies, and mammalian bioprocess sciences. Specifically, we address how these methods in conjunction with traditional monitoring techniques represent a unique opportunity to better characterize and understand host cell culture state, shift from an empirical to rational approach to process development and optimization of bioreactor cultivation processes. We summarize the following six key areas: (i) research applied to parental, non-recombinant cell lines; (ii) systems level datasets generated with recombinant cell lines; (iii) datasets linking phenotypic traits to relevant biomarkers; (iv) data depositories and bioinformatics tools; (v) in silico model development, and (vi) examples where these approaches have been used to rationally improve cellular processes. We critically assess relevant and state of the art research being conducted in academic, government and industrial laboratories. Furthermore, we apply our expertise in bioprocess to define a potential model for integration of these systems biology approaches into biologics development. © 2015 Wiley Periodicals, Inc.

Assessment of coastal management options by means of multilayered ecosystem models

NASA Astrophysics Data System (ADS)

Nobre, Ana M.; Ferreira, João G.; Nunes, João P.; Yan, Xiaojun; Bricker, Suzanne; Corner, Richard; Groom, Steve; Gu, Haifeng; Hawkins, Anthony J. S.; Hutson, Rory; Lan, Dongzhao; Silva, João D. Lencart e.; Pascoe, Philip; Telfer, Trevor; Zhang, Xuelei; Zhu, Mingyuan

2010-03-01

This paper presents a multilayered ecosystem modelling approach that combines the simulation of the biogeochemistry of a coastal ecosystem with the simulation of the main forcing functions, such as catchment loading and aquaculture activities. This approach was developed as a tool for sustainable management of coastal ecosystems. A key feature is to simulate management scenarios that account for changes in multiple uses and enable assessment of cumulative impacts of coastal activities. The model was applied to a coastal zone in China with large aquaculture production and multiple catchment uses, and where management efforts to improve water quality are under way. Development scenarios designed in conjunction with local managers and aquaculture producers include the reduction of fish cages and treatment of wastewater. Despite the reduction in nutrient loading simulated in three different scenarios, inorganic nutrient concentrations in the bay were predicted to exceed the thresholds for poor quality defined by Chinese seawater quality legislation. For all scenarios there is still a Moderate High to High nutrient loading from the catchment, so further reductions might be enacted, together with additional decreases in fish cage culture. The model predicts that overall, shellfish production decreases by 10%-28% using any of these development scenarios, principally because shellfish growth is being sustained by the substances to be reduced for improvement of water quality. The model outcomes indicate that this may be counteracted by zoning of shellfish aquaculture at the ecosystem level in order to optimize trade-offs between productivity and environmental effects. The present case study exemplifies the value of multilayered ecosystem modelling as a tool for Integrated Coastal Zone Management and for the adoption of ecosystem approaches for marine resource management. This modelling approach can be applied worldwide, and may be particularly useful for the application of coastal management regulation, for instance in the implementation of the European Marine Strategy Framework Directive.

NASA Human Spaceflight Conjunction Assessment: Recent Conjunctions of Interest

NASA Technical Reports Server (NTRS)

Browns, Ansley C.

2010-01-01

This viewgraph presentation discusses a brief history of NASA Human Spaceflight Conjunction Assessment (CA) activities, an overview of NASA CA process for ISS and Shuttle, and recent examples from Human Spaceflight conjunctions.

Mechanism-Based FE Simulation of Tool Wear in Diamond Drilling of SiCp/Al Composites.

PubMed

Xiang, Junfeng; Pang, Siqin; Xie, Lijing; Gao, Feinong; Hu, Xin; Yi, Jie; Hu, Fang

2018-02-07

The aim of this work is to analyze the micro mechanisms underlying the wear of macroscale tools during diamond machining of SiC p /Al6063 composites and to develop the mechanism-based diamond wear model in relation to the dominant wear behaviors. During drilling, high volume fraction SiC p /Al6063 composites containing Cu, the dominant wear mechanisms of diamond tool involve thermodynamically activated physicochemical wear due to diamond-graphite transformation catalyzed by Cu in air atmosphere and mechanically driven abrasive wear due to high-frequency scrape of hard SiC reinforcement on tool surface. An analytical diamond wear model, coupling Usui abrasive wear model and Arrhenius extended graphitization wear model was proposed and implemented through a user-defined subroutine for tool wear estimates. Tool wear estimate in diamond drilling of SiC p /Al6063 composites was achieved by incorporating the combined abrasive-chemical tool wear subroutine into the coupled thermomechanical FE model of 3D drilling. The developed drilling FE model for reproducing diamond tool wear was validated for feasibility and reliability by comparing numerically simulated tool wear morphology and experimentally observed results after drilling a hole using brazed polycrystalline diamond (PCD) and chemical vapor deposition (CVD) diamond coated tools. A fairly good agreement of experimental and simulated results in cutting forces, chip and tool wear morphologies demonstrates that the developed 3D drilling FE model, combined with a subroutine for diamond tool wear estimate can provide a more accurate analysis not only in cutting forces and chip shape but also in tool wear behavior during drilling SiC p /Al6063 composites. Once validated and calibrated, the developed diamond tool wear model in conjunction with other machining FE models can be easily extended to the investigation of tool wear evolution with various diamond tool geometries and other machining processes in cutting different workpiece materials.

Mechanism-Based FE Simulation of Tool Wear in Diamond Drilling of SiCp/Al Composites

PubMed Central

Xiang, Junfeng; Pang, Siqin; Xie, Lijing; Gao, Feinong; Hu, Xin; Yi, Jie; Hu, Fang

2018-01-01

The aim of this work is to analyze the micro mechanisms underlying the wear of macroscale tools during diamond machining of SiCp/Al6063 composites and to develop the mechanism-based diamond wear model in relation to the dominant wear behaviors. During drilling, high volume fraction SiCp/Al6063 composites containing Cu, the dominant wear mechanisms of diamond tool involve thermodynamically activated physicochemical wear due to diamond-graphite transformation catalyzed by Cu in air atmosphere and mechanically driven abrasive wear due to high-frequency scrape of hard SiC reinforcement on tool surface. An analytical diamond wear model, coupling Usui abrasive wear model and Arrhenius extended graphitization wear model was proposed and implemented through a user-defined subroutine for tool wear estimates. Tool wear estimate in diamond drilling of SiCp/Al6063 composites was achieved by incorporating the combined abrasive-chemical tool wear subroutine into the coupled thermomechanical FE model of 3D drilling. The developed drilling FE model for reproducing diamond tool wear was validated for feasibility and reliability by comparing numerically simulated tool wear morphology and experimentally observed results after drilling a hole using brazed polycrystalline diamond (PCD) and chemical vapor deposition (CVD) diamond coated tools. A fairly good agreement of experimental and simulated results in cutting forces, chip and tool wear morphologies demonstrates that the developed 3D drilling FE model, combined with a subroutine for diamond tool wear estimate can provide a more accurate analysis not only in cutting forces and chip shape but also in tool wear behavior during drilling SiCp/Al6063 composites. Once validated and calibrated, the developed diamond tool wear model in conjunction with other machining FE models can be easily extended to the investigation of tool wear evolution with various diamond tool geometries and other machining processes in cutting different workpiece materials. PMID:29414839

Recent Patents and Emerging Therapeutics in the Treatment of Allergic Conjunctivitis

PubMed Central

Mishra, Gyan P.; Tamboli, Viral; Jwala, Jwala; Mitra, Ashim K.

2011-01-01

Ocular allergy is an inflammatory response of the conjunctival mucosa that also affects the cornea and eyelids. Allergic conjunctivitis includes seasonal allergic conjunctivitis (SAC), perennial allergic conjunctivitis (PAC), vernal keratoconjunctivitis (VKC), atopic keratoconjunctivitis (AKC) and giant papillary conjunctivitis (GPC). In general, allergic conditions involve mast cell degranulation that leads to release of inflammatory mediators and activation of enzymatic cascades generating pro-inflammatory mediators. In chronic ocular inflammatory disorders associated with mast cell activation such as VKC and AKC constant inflammatory response is observed due to predominance of inflammatory mediators such as eosinophils and Th2-generated cytokines. Antihistamines, mast-cell stabilizers, non-steroidal anti-inflammatory agents, corticosteroids and immunomodulatory agents are commonly indicated for the treatment of acute and chronic allergic conjunctivitis. In recent years newer drug molecules have been introduced in the treatment of allergic conjunctivitis. This article reviews recent patents and emerging therapeutics in the treatment of allergic conjunctivitis. PMID:21171952

Study program for design improvements of the X-3060 klystron. Phase 3: Electron gun fabrication and beam analyzer evaluation. Phase 4: Klystron prototype fabrication and testing

NASA Technical Reports Server (NTRS)

Goldfinger, A.

1981-01-01

A full scale model was produced to verify suggested design changes. Through beam analyzer study, the correct electron beam diameter and cross sectional profile were established in conjunction with the desired confining magnetic field. Comparative data on the performance of the X-3060 klystron, design predictions for the improved klystron, and performance data taken during acceptance testing of the prototype VKS-8274 JPL are presented.

Using 2H labelling to improve the NMR detectability of pyridine and its derivatives by SABRE

PubMed Central

Norcott, Philip; Burns, Michael J.; Rayner, Peter J.; Mewis, Ryan E.

2018-01-01

By introducing a range of 2H labels into pyridine and the para‐substituted agents, methyl isonicotinate and isonicotinamide, we significantly improve their NMR detectability in conjunction with the signal amplification by reversible exchange process. We describe how the rates of T 1 relaxation for the remaining 1H nuclei are increased and show how this leads to a concomitant increase in the level of 1H and 13C hyperpolarization that can ultimately be detected. PMID:29274294

Communications satellite system for Africa

NASA Astrophysics Data System (ADS)

Kriegl, W.; Laufenberg, W.

1980-09-01

Earlier established requirement estimations were improved upon by contacting African administrations and organizations. An enormous demand is shown to exist for telephony and teletype services in rural areas. It is shown that educational television broadcasting should be realized in the current African transport and communications decade (1978-1987). Radio broadcasting is proposed in order to overcome illiteracy and to improve educational levels. The technical and commercial feasibility of the system is provided by computer simulations which demonstrate how the required objectives can be fulfilled in conjunction with ground networks.

Organizing environmental flow frameworks to meet hydropower mitigation needs

DOE Office of Scientific and Technical Information (OSTI.GOV)

McManamay, Ryan A.; Brewer, Shannon K.; Jager, Henriette I.

The global recognition of the importance of natural flow regimes to sustain the ecological integrity of river systems has led to increased societal pressure on the hydropower industry to change plant operations to improve downstream aquatic ecosystems. However, a complete reinstatement of natural flow regimes is often unrealistic when balancing water needs for ecosystems, energy production, and other human uses. Thus, stakeholders must identify a prioritized subset of flow prescriptions that meet ecological objectives in light of realistic constraints. Yet, isolating aspects of flow regimes to restore downstream of hydropower facilities is among the greatest challenges of environmental flow sciencemore » due, in part, to the sheer volume of available environmental flow tools in conjunction with complex negotiation-based regulatory procedures. Here, we propose an organizational framework that structures information and existing flow paradigms into a staged process that assists stakeholders in implementing environmental flows for hydropower facilities. The framework identifies areas where regulations fall short of the needed scientific process, and provide suggestions for stakeholders to ameliorate those situations through advanced preparation. We highlight the strengths of existing flow paradigms in their application to hydropower settings and suggest when and where tools are most applicable. In conclusion, our suggested framework increases the effectiveness and efficiency of the e-flow implementation process by rapidly establishing a knowledge base and decreasing uncertainty so more time can be devoted to filling knowledge gaps. As a result, the framework provides the structure for a coordinated research agenda to further the science of environmental flows related to hydropower environments.« less

Using a Smartphone App and Coaching Group Sessions to Promote Residents' Reflection in the Workplace.

PubMed

Könings, Karen D; van Berlo, Jean; Koopmans, Richard; Hoogland, Henk; Spanjers, Ingrid A E; ten Haaf, Jeroen A; van der Vleuten, Cees P M; van Merriënboer, Jeroen J G

2016-03-01

Reflecting on workplace-based experiences is necessary for professional development. However, residents need support to raise their awareness of valuable moments for learning and to thoughtfully analyze those learning moments afterwards. From October to December 2012, the authors held a multidisciplinary six-week postgraduate training module focused on general competencies. Residents were randomly assigned to one of four conditions with varying degrees of reflection support; they were offered (1) a smartphone app, (2) coaching group sessions, (3) a combination of both, or (4) neither type of support. The app allowed participants to capture in real time learning moments as a text note, audio recording, picture, or video. Coaching sessions held every two weeks aimed to deepen participants' reflection on captured learning moments. Questionnaire responses and reflection data were compared between conditions to assess the effects of the app and coaching sessions on intensity and frequency of reflection. Sixty-four residents participated. App users reflected more often, captured more learning moments, and reported greater learning progress than nonapp users. Participants who attended coaching sessions were more alert to learning moments and pursued more follow-up learning activities to improve on the general competencies. Those who received both types of support were most alert to these learning moments. A simple mobile app for capturing learning moments shows promise as a tool to support workplace-based learning, especially when combined with coaching sessions. Future research should evaluate these tools on a broader scale and in conjunction with residents' and students' personal digital portfolios.

Incorporating probabilistic seasonal climate forecasts into river management using a risk-based framework

USGS Publications Warehouse

Sojda, Richard S.; Towler, Erin; Roberts, Mike; Rajagopalan, Balaji

2013-01-01

[1] Despite the influence of hydroclimate on river ecosystems, most efforts to date have focused on using climate information to predict streamflow for water supply. However, as water demands intensify and river systems are increasingly stressed, research is needed to explicitly integrate climate into streamflow forecasts that are relevant to river ecosystem management. To this end, we present a five step risk-based framework: (1) define risk tolerance, (2) develop a streamflow forecast model, (3) generate climate forecast ensembles, (4) estimate streamflow ensembles and associated risk, and (5) manage for climate risk. The framework is successfully demonstrated for an unregulated watershed in southwest Montana, where the combination of recent drought and water withdrawals has made it challenging to maintain flows needed for healthy fisheries. We put forth a generalized linear modeling (GLM) approach to develop a suite of tools that skillfully model decision-relevant low flow characteristics in terms of climate predictors. Probabilistic precipitation forecasts are used in conjunction with the GLMs, resulting in season-ahead prediction ensembles that provide the full risk profile. These tools are embedded in an end-to-end risk management framework that directly supports proactive fish conservation efforts. Results show that the use of forecasts can be beneficial to planning, especially in wet years, but historical precipitation forecasts are quite conservative (i.e., not very “sharp”). Synthetic forecasts show that a modest “sharpening” can strongly impact risk and improve skill. We emphasize that use in management depends on defining relevant environmental flows and risk tolerance, requiring local stakeholder involvement.

Organizing environmental flow frameworks to meet hydropower mitigation needs

DOE PAGES

McManamay, Ryan A.; Brewer, Shannon K.; Jager, Henriette I.; ...

2016-06-25

The global recognition of the importance of natural flow regimes to sustain the ecological integrity of river systems has led to increased societal pressure on the hydropower industry to change plant operations to improve downstream aquatic ecosystems. However, a complete reinstatement of natural flow regimes is often unrealistic when balancing water needs for ecosystems, energy production, and other human uses. Thus, stakeholders must identify a prioritized subset of flow prescriptions that meet ecological objectives in light of realistic constraints. Yet, isolating aspects of flow regimes to restore downstream of hydropower facilities is among the greatest challenges of environmental flow sciencemore » due, in part, to the sheer volume of available environmental flow tools in conjunction with complex negotiation-based regulatory procedures. Here, we propose an organizational framework that structures information and existing flow paradigms into a staged process that assists stakeholders in implementing environmental flows for hydropower facilities. The framework identifies areas where regulations fall short of the needed scientific process, and provide suggestions for stakeholders to ameliorate those situations through advanced preparation. We highlight the strengths of existing flow paradigms in their application to hydropower settings and suggest when and where tools are most applicable. In conclusion, our suggested framework increases the effectiveness and efficiency of the e-flow implementation process by rapidly establishing a knowledge base and decreasing uncertainty so more time can be devoted to filling knowledge gaps. As a result, the framework provides the structure for a coordinated research agenda to further the science of environmental flows related to hydropower environments.« less

Evaluating resective surgery targets in epilepsy patients: A comparison of quantitative EEG methods.

PubMed

Müller, Michael; Schindler, Kaspar; Goodfellow, Marc; Pollo, Claudio; Rummel, Christian; Steimer, Andreas

2018-07-15

Quantitative analysis of intracranial EEG is a promising tool to assist clinicians in the planning of resective brain surgery in patients suffering from pharmacoresistant epilepsies. Quantifying the accuracy of such tools, however, is nontrivial as a ground truth to verify predictions about hypothetical resections is missing. As one possibility to address this, we use customized hypotheses tests to examine the agreement of the methods on a common set of patients. One method uses machine learning techniques to enable the predictive modeling of EEG time series. The other estimates nonlinear interrelation between EEG channels. Both methods were independently shown to distinguish patients with excellent post-surgical outcome (Engel class I) from those without improvement (Engel class IV) when assessing the electrodes associated with the tissue that was actually resected during brain surgery. Using the AND and OR conjunction of both methods we evaluate the performance gain that can be expected when combining them. Both methods' assessments correlate strongly positively with the similarity between a hypothetical resection and the corresponding actual resection in class I patients. Moreover, the Spearman rank correlation between the methods' patient rankings is significantly positive. To our best knowledge, this is the first study comparing surgery target assessments from fundamentally differing techniques. Although conceptually completely independent, there is a relation between the predictions obtained from both methods. Their broad consensus supports their application in clinical practice to provide physicians additional information in the process of presurgical evaluation. Copyright © 2018 The Authors. Published by Elsevier B.V. All rights reserved.

The confusion in complying with good manufacturing practice requirements in Malaysia

NASA Astrophysics Data System (ADS)

Jali, Mohd Bakri; Ghani, Maaruf Abdul; Nor, Norazmir Md

2016-11-01

Food manufacturing operations need to fulfil regulatory requirements related to hygiene and good manufacturing practices (GMP) to successfully market their products as safe and quality products. GMP based on its ten elements used as guidelines to ensure control over biological, chemical and physical hazards. This study aims to investigate the confusion for design and facilities elements among food industries. Both qualitative and quantitative techniques are used as systematic tools. Design and facilities elements lay a firm foundation for good manufacturing practice to ensure food hygiene and should be used in conjunction with each specific code of hygiene practice and guidelines.

Multimedia reviews: multimedia convergence for clinicians.

PubMed

Taintor, Zebulon

2003-12-01

Introduction by the column editor: In this final column of the year, Dr. Taintor provides an overview of exciting technological developments via his report on the 2003 annual meeting of the American Association for Technology in Psychiatry (AATP). Advances-and convergences-in technology are providing clinicians with increasingly useful tools to enhance the effectiveness of their treatments, increase access to care, reduce errors, and save time. As Dr. Taintor notes, AATP's meeting is traditionally held in conjunction with the annual meeting of the American Psychiatric Association (APA). I hope that his report will encourage APA's members to attend some of next year's informative sessions.

Should Governments Invest More in Nudging?

PubMed

Benartzi, Shlomo; Beshears, John; Milkman, Katherine L; Sunstein, Cass R; Thaler, Richard H; Shankar, Maya; Tucker-Ray, Will; Congdon, William J; Galing, Steven

2017-08-01

Governments are increasingly adopting behavioral science techniques for changing individual behavior in pursuit of policy objectives. The types of "nudge" interventions that governments are now adopting alter people's decisions without coercion or significant changes to economic incentives. We calculated ratios of impact to cost for nudge interventions and for traditional policy tools, such as tax incentives and other financial inducements, and we found that nudge interventions often compare favorably with traditional interventions. We conclude that nudging is a valuable approach that should be used more often in conjunction with traditional policies, but more calculations are needed to determine the relative effectiveness of nudging.

STOL landing thrust: Reverser jet flowfields

NASA Technical Reports Server (NTRS)

Kotansky, D. R.; Glaze, L. W.

1987-01-01

Analysis tools and modeling concepts for jet flow fields encountered upon use of thrust reversers for high performance military aircraft are described. A semi-empirical model of the reverser ground wall jet interaction with the uniform cross flow due to aircraft forward velocity is described. This ground interaction model is used to demonstrate exhaust gas ingestion conditions. The effects of control of exhaust jet vector angle, lateral splay, and moving versus fixed ground simulation are discussed. The Adler/Baron jet-in-cross flow model is used in conjunction with three dimensional panel methods to investigate the upper surface jet induced flow field.

Smile design: rules, tools and strategies to help plan aesthetic restorative dentistry.

PubMed

Holyoak, Matthew

2013-10-01

This article is intended to provide dentists with a framework to help in objectively assessing upper anterior aesthetic restorations. Not all of the areas discussed will be equally important in all cases, and a degree of subjectivity, based on clinical experience, is essential. There has been a huge increase in settlements in cases when aesthetic treatment has not led to patient satisfaction. The author hopes that this type of approach, in conjunction with good patient communication and detailed records, will minimise the potential for litigation, should problems arise. Success or failure is largely defined during the planning stage.

Perceptual learning in visual search: fast, enduring, but non-specific.

PubMed

Sireteanu, R; Rettenbach, R

1995-07-01

Visual search has been suggested as a tool for isolating visual primitives. Elementary "features" were proposed to involve parallel search, while serial search is necessary for items without a "feature" status, or, in some cases, for conjunctions of "features". In this study, we investigated the role of practice in visual search tasks. We found that, under some circumstances, initially serial tasks can become parallel after a few hundred trials. Learning in visual search is far less specific than learning of visual discriminations and hyperacuity, suggesting that it takes place at another level in the central visual pathway, involving different neural circuits.

On relative distortion in fingerprint comparison.

PubMed

Kalka, Nathan D; Hicklin, R Austin

2014-11-01

When fingerprints are deposited, non-uniform pressure in conjunction with the inherent elasticity of friction ridge skin often causes linear and non-linear distortions in the ridge and valley structure. The effects of these distortions must be considered during analysis of fingerprint images. Even when individual prints are not notably distorted, relative distortion between two prints can have a serious impact on comparison. In this paper we discuss several metrics for quantifying and visualizing linear and non-linear fingerprint deformations, and software tools to assist examiners in accounting for distortion in fingerprint comparisons. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Improving adherence to web-based cessation programs: a randomized controlled trial study protocol

PubMed Central

2013-01-01

Background Reducing smoking prevalence is a public health priority that can save more lives and money than almost any other known preventive intervention. Internet interventions have the potential for enormous public health impact given their broad reach and effectiveness. However, most users engage only minimally with even the best designed websites, diminishing their impact due to an insufficient ‘dose’. Two approaches to improve adherence to Internet cessation programs are integrating smokers into an online social network and providing free nicotine replacement therapy (NRT). Active participation in online communities is associated with higher rates of cessation. Integrating smokers into an online social network can increase support and may also increase utilization of cessation tools and NRT. Removing barriers to NRT may increase uptake and adherence, and may also increase use of online cessation tools as smokers look for information and support while quitting. The combination of both strategies may exert the most powerful effects on adherence compared to either strategy alone. Methods/Design This study compares the efficacy of a smoking cessation website (WEB) alone and in conjunction with free NRT and a social network (SN) protocol designed to integrate participants into the online community. Using a 2 (SN, no SN) x 2 (NRT, no NRT) randomized, controlled factorial design with repeated measures at baseline, 3 months, and 9 months, this study will recruit N = 4,000 new members of an internet cessation program and randomize them to: 1) WEB, 2) WEB + SN, 3) WEB + NRT, or 4) WEB + SN + NRT. Hypotheses are that all interventions will outperform WEB and that WEB + SN + NRT will outperform WEB + NRT and WEB + SN on 30-day point prevalence abstinence at 9 months. Exploratory analyses will examine theory-driven hypotheses about the mediators and moderators of outcome. Discussion Addressing adherence in internet cessation programs is critical and timely to leverage their potential public health impact. This study is innovative in its use of a social network approach to improve behavioral and pharmacological treatment utilization to improve cessation. This approach is significant for reducing tobacco’s devastating disease burden and for optimizing behavior change in other arenas where adherence is just as critical. Trial registration ISRCTN:ISRCTN45127327 PMID:23414086

Application of a weighted-averaging method for determining paleosalinity: a tool for restoration of south Florida's estuaries

USGS Publications Warehouse

Wingard, G.L.; Hudley, J.W.

2012-01-01

A molluscan analogue dataset is presented in conjunction with a weighted-averaging technique as a tool for estimating past salinity patterns in south Florida’s estuaries and developing targets for restoration based on these reconstructions. The method, here referred to as cumulative weighted percent (CWP), was tested using modern surficial samples collected in Florida Bay from sites located near fixed water monitoring stations that record salinity. The results were calibrated using species weighting factors derived from examining species occurrence patterns. A comparison of the resulting calibrated species-weighted CWP (SW-CWP) to the observed salinity at the water monitoring stations averaged over a 3-year time period indicates, on average, the SW-CWP comes within less than two salinity units of estimating the observed salinity. The SW-CWP reconstructions were conducted on a core from near the mouth of Taylor Slough to illustrate the application of the method.

Estimating the Reliability of Electronic Parts in High Radiation Fields

NASA Technical Reports Server (NTRS)

Everline, Chester; Clark, Karla; Man, Guy; Rasmussen, Robert; Johnston, Allan; Kohlhase, Charles; Paulos, Todd

2008-01-01

Radiation effects on materials and electronic parts constrain the lifetime of flight systems visiting Europa. Understanding mission lifetime limits is critical to the design and planning of such a mission. Therefore, the operational aspects of radiation dose are a mission success issue. To predict and manage mission lifetime in a high radiation environment, system engineers need capable tools to trade radiation design choices against system design and reliability, and science achievements. Conventional tools and approaches provided past missions with conservative designs without the ability to predict their lifetime beyond the baseline mission.This paper describes a more systematic approach to understanding spacecraft design margin, allowing better prediction of spacecraft lifetime. This is possible because of newly available electronic parts radiation effects statistics and an enhanced spacecraft system reliability methodology. This new approach can be used in conjunction with traditional approaches for mission design. This paper describes the fundamentals of the new methodology.

Sandia Advanced MEMS Design Tools v. 3.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yarberry, Victor R.; Allen, James J.; Lantz, Jeffrey W.

This is a major revision to the Sandia Advanced MEMS Design Tools. It replaces all previous versions. New features in this version: Revised to support AutoCAD 2014 and 2015 This CD contains an integrated set of electronic files that: a) Describe the SUMMiT V fabrication process b) Provide enabling educational information (including pictures, videos, technical information) c) Facilitate the process of designing MEMS with the SUMMiT process (prototype file, Design Rule Checker, Standard Parts Library) d) Facilitate the process of having MEMS fabricated at Sandia National Laboratories e) Facilitate the process of having post-fabrication services performed. While there exists somemore » files on the CD that are used in conjunction with software package AutoCAD, these files are not intended for use independent of the CD. Note that the customer must purchase his/her own copy of AutoCAD to use with these files.« less

Sandia MEMS Visualization Tools v. 3.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yarberry, Victor; Jorgensen, Craig R.; Young, Andrew I.

This is a revision to the Sandia MEMS Visualization Tools. It replaces all previous versions. New features in this version: Support for AutoCAD 2014 and 2015 . This CD contains an integrated set of electronic files that: a) Provides a 2D Process Visualizer that generates cross-section images of devices constructed using the SUMMiT V fabrication process. b) Provides a 3D Visualizer that generates 3D images of devices constructed using the SUMMiT V fabrication process. c) Provides a MEMS 3D Model generator that creates 3D solid models of devices constructed using the SUMMiT V fabrication process. While there exists some filesmore » on the CD that are used in conjunction with software package AutoCAD , these files are not intended for use independent of the CD. Note that the customer must purchase his/her own copy of AutoCAD to use with these files.« less

Framework for adaptive interoperability of manufacturing enterprises (FAIME): a case study

NASA Astrophysics Data System (ADS)

Sims, John E.; Chu, Bei Tseng B.; Long, Junshen; Matthews, Mike; Barnes, Johnny G.; Jones, Chris H.; Anderson, Rayne A.; Lambert, Russ; Drake, Doug C.; Hamilton, Mark A.; Connard, Mark

1997-01-01

In todays global economy, manufacturing industries require to connect disparate applications seamlessly. They require not only to exchange data and transactions, but present a single business process image to their employees in the office, headquarters, and on the plant floor. Also, it is imperative that small and medium size manufacturing companies deploy manufacturing execution systems applications in conjunction with modern enterprise resource programs for cycle time reduction and better quality. This paper presents the experiences and reflections on a project that created a tool set to assist the above be accomplished not only in a shorter cycle time, with a better predictable quality, and with an object oriented framework, but also a tool set that allows the manufacturer to still use legacy applications. This framework has the capability of plug-and- play so that future migrations and re-engineering of processes are more productive.

Barcoding Tetrahymena: discriminating species and identifying unknowns using the cytochrome c oxidase subunit I (cox-1) barcode.

PubMed

Kher, Chandni P; Doerder, F Paul; Cooper, Jason; Ikonomi, Pranvera; Achilles-Day, Undine; Küpper, Frithjof C; Lynn, Denis H

2011-01-01

DNA barcoding using the mitochondrial cytochromecoxidase subunit I (cox-1) gene has recently gained popularity as a tool for species identification of a variety of taxa. The primary objective of our research was to explore the efficacy of using cox-1 barcoding for species identification within the genusTetrahymena. We first increased intraspecific sampling forTetrahymena canadensis, Tetrahymena hegewischi, Tetrahymena pyriformis, Tetrahymena rostrata, Tetrahymena thermophila, and Tetrahymena tropicalis. Increased sampling efforts show that intraspecific sequence divergence is typically less than 1%, though it may be more in some species. The barcoding also showed that some strains might be misidentified or mislabeled. We also used cox-1 barcodes to provide species identifications for 51 unidentified environmental isolates, with a success rate of 98%. Thus, cox-1 barcoding is an invaluable tool for protistologists, especially when used in conjunction with morphological studies. 2010 Elsevier GmbH. All rights reserved.

Versatile Friction Stir Welding/Friction Plug Welding System

NASA Technical Reports Server (NTRS)

Carter, Robert

2006-01-01

A proposed system of tooling, machinery, and control equipment would be capable of performing any of several friction stir welding (FSW) and friction plug welding (FPW) operations. These operations would include the following: Basic FSW; FSW with automated manipulation of the length of the pin tool in real time [the so-called auto-adjustable pin-tool (APT) capability]; Self-reacting FSW (SRFSW); SR-FSW with APT capability and/or real-time adjustment of the distance between the front and back shoulders; and Friction plug welding (FPW) [more specifically, friction push plug welding] or friction pull plug welding (FPPW) to close out the keyhole of, or to repair, an FSW or SR-FSW weld. Prior FSW and FPW systems have been capable of performing one or two of these operations, but none has thus far been capable of performing all of them. The proposed system would include a common tool that would have APT capability for both basic FSW and SR-FSW. Such a tool was described in Tool for Two Types of Friction Stir Welding (MFS- 31647-1), NASA Tech Briefs, Vol. 30, No. 10 (October 2006), page 70. Going beyond what was reported in the cited previous article, the common tool could be used in conjunction with a plug welding head to perform FPW or FPPW. Alternatively, the plug welding head could be integrated, along with the common tool, into a FSW head that would be capable of all of the aforementioned FSW and FPW operations. Any FSW or FPW operation could be performed under any combination of position and/or force control.

Using GoPro to Give Video-Assisted Operative Feedback for Surgery Residents: A Feasibility and Utility Assessment.

PubMed

Moore, Maureen D; Abelson, Jonathan S; O'Mahoney, Paul; Bagautdinov, Iskander; Yeo, Heather; Watkins, Anthony C

As an adjunct to simulation-based teaching, laparoscopic video-based surgical coaching has been an effective tool to augment surgical education. However, the wide use of video review in open surgery has been limited primarily due to technological and logistical challenges. The aims of our study were to (1) evaluate perceptions of general surgery (GS) residents on video-assisted operative instruction and (2) conduct a pilot study using a head-mounted GoPro in conjunction with the operative performance rating system to assess feasibility of providing video review to enhance operative feedback during open procedures. GS residents were anonymously surveyed to evaluate their perceptions of oral and written operative feedback and use of video-based operative resources. We then conducted a pilot study of 10 GS residents to assess the utility and feasibility of using a GoPro to record resident performance of an arteriovenous fistula creation with an attending surgeon. Categorical variables were analyzed using the chi-square test. Academic, tertiary medical center. GS residents and faculty. A total of 59 GS residents were anonymously surveyed (response rate = 65.5%). A total of 40% (n = 24) of residents reported that structured evaluations rarely or never provided meaningful feedback. When feedback was received, 55% (n = 32) residents reported that it was only rarely or sometimes in regard to their operative skills. There was no significant difference in surveyed responses among junior postgraduate year (PGY 1-2), senior (PGY 3-4), or chief residents (PGY-5). A total of 80% (n = 8) of residents found the use of GoPro video review very or extremely useful for education; they also deemed video review more useful for operative feedback than written or communicative feedback. An overwhelming majority (90%, n = 9) felt that video review would lead to improved technical skills, wanted to review the video with the attending surgeon for further feedback, and desired expansion of this tool to include additional procedures. Although there has been progress toward improving operative feedback, room for further improvement remains. The use of a head-mounted GoPro is a dynamic tool that provides high-quality video for operative review and has the potential to augment the training experience of GS residents. Future studies exploring a wide array of open procedures involving a greater number of trainees will be needed to further define the use of this resource. Copyright © 2017. Published by Elsevier Inc.

A Comparison of Variant Calling Pipelines Using Genome in a Bottle as a Reference

PubMed Central

2015-01-01

High-throughput sequencing, especially of exomes, is a popular diagnostic tool, but it is difficult to determine which tools are the best at analyzing this data. In this study, we use the NIST Genome in a Bottle results as a novel resource for validation of our exome analysis pipeline. We use six different aligners and five different variant callers to determine which pipeline, of the 30 total, performs the best on a human exome that was used to help generate the list of variants detected by the Genome in a Bottle Consortium. Of these 30 pipelines, we found that Novoalign in conjunction with GATK UnifiedGenotyper exhibited the highest sensitivity while maintaining a low number of false positives for SNVs. However, it is apparent that indels are still difficult for any pipeline to handle with none of the tools achieving an average sensitivity higher than 33% or a Positive Predictive Value (PPV) higher than 53%. Lastly, as expected, it was found that aligners can play as vital a role in variant detection as variant callers themselves. PMID:26539496

Mining and integration of pathway diagrams from imaging data.

PubMed

Kozhenkov, Sergey; Baitaluk, Michael

2012-03-01

Pathway diagrams from PubMed and World Wide Web (WWW) contain valuable highly curated information difficult to reach without tools specifically designed and customized for the biological semantics and high-content density of the images. There is currently no search engine or tool that can analyze pathway images, extract their pathway components (molecules, genes, proteins, organelles, cells, organs, etc.) and indicate their relationships. Here, we describe a resource of pathway diagrams retrieved from article and web-page images through optical character recognition, in conjunction with data mining and data integration methods. The recognized pathways are integrated into the BiologicalNetworks research environment linking them to a wealth of data available in the BiologicalNetworks' knowledgebase, which integrates data from >100 public data sources and the biomedical literature. Multiple search and analytical tools are available that allow the recognized cellular pathways, molecular networks and cell/tissue/organ diagrams to be studied in the context of integrated knowledge, experimental data and the literature. BiologicalNetworks software and the pathway repository are freely available at www.biologicalnetworks.org. Supplementary data are available at Bioinformatics online.

Insertional engineering of chromosomes with Sleeping Beauty transposition: an overview.

PubMed

Grabundzija, Ivana; Izsvák, Zsuzsanna; Ivics, Zoltán

2011-01-01

Novel genetic tools and mutagenesis strategies based on the Sleeping Beauty (SB) transposable element are currently under development with a vision to link primary DNA sequence information to gene functions in vertebrate models. By virtue of its inherent capacity to insert into DNA, the SB transposon can be developed into powerful tools for chromosomal manipulations. Mutagenesis screens based on SB have numerous advantages including high throughput and easy identification of mutated alleles. Forward genetic approaches based on insertional mutagenesis by engineered SB transposons have the advantage of providing insight into genetic networks and pathways based on phenotype. Indeed, the SB transposon has become a highly instrumental tool to induce tumors in experimental animals in a tissue-specific -manner with the aim of uncovering the genetic basis of diverse cancers. Here, we describe a battery of mutagenic cassettes that can be applied in conjunction with SB transposon vectors to mutagenize genes, and highlight versatile experimental strategies for the generation of engineered chromosomes for loss-of-function as well as gain-of-function mutagenesis for functional gene annotation in vertebrate models.

Using SFOC to fly the Magellan Venus mapping mission

NASA Technical Reports Server (NTRS)

Bucher, Allen W.; Leonard, Robert E., Jr.; Short, Owen G.

1993-01-01

Traditionally, spacecraft flight operations at the Jet Propulsion Laboratory (JPL) have been performed by teams of spacecraft experts utilizing ground software designed specifically for the current mission. The Jet Propulsion Laboratory set out to reduce the cost of spacecraft mission operations by designing ground data processing software that could be used by multiple spacecraft missions, either sequentially or concurrently. The Space Flight Operations Center (SFOC) System was developed to provide the ground data system capabilities needed to monitor several spacecraft simultaneously and provide enough flexibility to meet the specific needs of individual projects. The Magellan Spacecraft Team utilizes the SFOC hardware and software designed for engineering telemetry analysis, both real-time and non-real-time. The flexibility of the SFOC System has allowed the spacecraft team to integrate their own tools with SFOC tools to perform the tasks required to operate a spacecraft mission. This paper describes how the Magellan Spacecraft Team is utilizing the SFOC System in conjunction with their own software tools to perform the required tasks of spacecraft event monitoring as well as engineering data analysis and trending.

Spatial Modelling Tools to Integrate Public Health and Environmental Science, Illustrated with Infectious Cryptosporidiosis

PubMed Central

Lal, Aparna

2016-01-01

Contemporary spatial modelling tools can help examine how environmental exposures such as climate and land use together with socio-economic factors sustain infectious disease transmission in humans. Spatial methods can account for interactions across global and local scales, geographic clustering and continuity of the exposure surface, key characteristics of many environmental influences. Using cryptosporidiosis as an example, this review illustrates how, in resource rich settings, spatial tools have been used to inform targeted intervention strategies and forecast future disease risk with scenarios of environmental change. When used in conjunction with molecular studies, they have helped determine location-specific infection sources and environmental transmission pathways. There is considerable scope for such methods to be used to identify data/infrastructure gaps and establish a baseline of disease burden in resource-limited settings. Spatial methods can help integrate public health and environmental science by identifying the linkages between the physical and socio-economic environment and health outcomes. Understanding the environmental and social context for disease spread is important for assessing the public health implications of projected environmental change. PMID:26848669

Spatial Modelling Tools to Integrate Public Health and Environmental Science, Illustrated with Infectious Cryptosporidiosis.

PubMed

Lal, Aparna

2016-02-02

Contemporary spatial modelling tools can help examine how environmental exposures such as climate and land use together with socio-economic factors sustain infectious disease transmission in humans. Spatial methods can account for interactions across global and local scales, geographic clustering and continuity of the exposure surface, key characteristics of many environmental influences. Using cryptosporidiosis as an example, this review illustrates how, in resource rich settings, spatial tools have been used to inform targeted intervention strategies and forecast future disease risk with scenarios of environmental change. When used in conjunction with molecular studies, they have helped determine location-specific infection sources and environmental transmission pathways. There is considerable scope for such methods to be used to identify data/infrastructure gaps and establish a baseline of disease burden in resource-limited settings. Spatial methods can help integrate public health and environmental science by identifying the linkages between the physical and socio-economic environment and health outcomes. Understanding the environmental and social context for disease spread is important for assessing the public health implications of projected environmental change.

UAE University Male Students' Interests Impact on Reading and Writing Performance and Improvement

ERIC Educational Resources Information Center

Al Murshidi, Ghadah

2014-01-01

The study examined the impact of the conjunction of structured journal writing and reading for pleasure on students' reading and writing skills. Forty male students from UAE University participated in the study. The participants are of different academic abilities, majors and nationalities. Many of them have little experience with reading for…

Great Expectations, Mixed Results: Standards and Performance in Denver's New Public Schools, 2007-2011

ERIC Educational Resources Information Center

Ooms, Alexander

2012-01-01

In conjunction with the Denver Plan instituted in 2005, Denver Public Schools (DPS) has embarked upon a consistent strategy of opening new schools in an effort to improve overall academic performance. DPS has pursued this strategy under several different paths: an annual request for proposals from charter school applicants; allowing current…

Solar Resource Assessment with Sky Imagery and a Virtual Testbed for Sky Imager Solar Forecasting

NASA Astrophysics Data System (ADS)

Kurtz, Benjamin Bernard

In recent years, ground-based sky imagers have emerged as a promising tool for forecasting solar energy on short time scales (0 to 30 minutes ahead). Following the development of sky imager hardware and algorithms at UC San Diego, we present three new or improved algorithms for sky imager forecasting and forecast evaluation. First, we present an algorithm for measuring irradiance with a sky imager. Sky imager forecasts are often used in conjunction with other instruments for measuring irradiance, so this has the potential to decrease instrumentation costs and logistical complexity. In particular, the forecast algorithm itself often relies on knowledge of the current irradiance which can now be provided directly from the sky images. Irradiance measurements are accurate to within about 10%. Second, we demonstrate a virtual sky imager testbed that can be used for validating and enhancing the forecast algorithm. The testbed uses high-quality (but slow) simulations to produce virtual clouds and sky images. Because virtual cloud locations are known, much more advanced validation procedures are possible with the virtual testbed than with measured data. In this way, we are able to determine that camera geometry and non-uniform evolution of the cloud field are the two largest sources of forecast error. Finally, with the assistance of the virtual sky imager testbed, we develop improvements to the cloud advection model used for forecasting. The new advection schemes are 10-20% better at short time horizons.

Process modelling for materials preparation experiments

NASA Technical Reports Server (NTRS)

Rosenberger, Franz; Alexander, J. Iwan D.

1994-01-01

The main goals of the research under this grant consist of the development of mathematical tools and measurement techniques for transport properties necessary for high fidelity modelling of crystal growth from the melt and solution. Of the tasks described in detail in the original proposal, two remain to be worked on: development of a spectral code for moving boundary problems, and development of an expedient diffusivity measurement technique for concentrated and supersaturated solutions. We have focused on developing a code to solve for interface shape, heat and species transport during directional solidification. The work involved the computation of heat, mass and momentum transfer during Bridgman-Stockbarger solidification of compound semiconductors. Domain decomposition techniques and preconditioning methods were used in conjunction with Chebyshev spectral methods to accelerate convergence while retaining the high-order spectral accuracy. During the report period we have further improved our experimental setup. These improvements include: temperature control of the measurement cell to 0.1 C between 10 and 60 C; enclosure of the optical measurement path outside the ZYGO interferometer in a metal housing that is temperature controlled to the same temperature setting as the measurement cell; simultaneous dispensing and partial removal of the lower concentration (lighter) solution above the higher concentration (heavier) solution through independently motor-driven syringes; three-fold increase in data resolution by orientation of the interferometer with respect to diffusion direction; and increase of the optical path length in the solution cell to 12 mm.

Food marketing to children through toys: response of restaurants to the first U.S. toy ordinance.

PubMed

Otten, Jennifer J; Hekler, Eric B; Krukowski, Rebecca A; Buman, Matthew P; Saelens, Brian E; Gardner, Christopher D; King, Abby C

2012-01-01

On August 9, 2010, Santa Clara County CA became the first U.S. jurisdiction to implement an ordinance that prohibits the distribution of toys and other incentives to children in conjunction with meals, foods, or beverages that do not meet minimal nutritional criteria. Restaurants had many different options for complying with this ordinance, such as introducing more healthful menu options, reformulating current menu items, or changing marketing or toy distribution practices. To assess how ordinance-affected restaurants changed their child menus, marketing, and toy distribution practices relative to non-affected restaurants. Children's menu items and child-directed marketing and toy distribution practices were examined before and at two time points after ordinance implementation (from July through November 2010) at ordinance-affected fast-food restaurants compared with demographically matched unaffected same-chain restaurants using the Children's Menu Assessment tool. Affected restaurants showed a 2.8- to 3.4-fold improvement in Children's Menu Assessment scores from pre- to post-ordinance with minimal changes at unaffected restaurants. Response to the ordinance varied by restaurant. Improvements were seen in on-site nutritional guidance; promotion of healthy meals, beverages, and side items; and toy marketing and distribution activities. The ordinance appears to have positively influenced marketing of healthful menu items and toys as well as toy distribution practices at ordinance-affected restaurants, but did not affect the number of healthful food items offered. Copyright © 2012 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Performance analysis of decode-and-forward dual-hop optical spatial modulation with diversity combiner over atmospheric turbulence

NASA Astrophysics Data System (ADS)

Odeyemi, Kehinde O.; Owolawi, Pius A.; Srivastava, Viranjay M.

2017-11-01

Dual-hops transmission is a growing interest technique that can be used to mitigate against atmospheric turbulence along the Free Space Optical (FSO) communication links. This paper analyzes the performance of Decode-and-Forward (DF) dual-hops FSO systems in-conjunction with spatial modulation and diversity combiners over a Gamma-Gamma atmospheric turbulence channel using heterodyne detection. Maximum Ratio Combiner (MRC), Equal Gain Combiner (EGC) and Selection Combiner (SC) are considered at the relay and destination as mitigation tools to improve the system error performance. Power series expansion of modified Bessel function is used to derive the closed form expression for the end-to-end Average Pairwise Error Probability (APEP) expressions for each of the combiners under study and a tight upper bound on the Average Bit Error Rate (ABER) per hop is given. Thus, the overall end-to-end ABER for the dual-hops FSO system is then evaluated. The numerical results depicted that dual-hops transmission systems outperformed the direct link systems. Moreover, the impact of having the same and different combiners at the relay and destination are also presented. The results also confirm that the combination of dual hops transmission with spatial modulation and diversity combiner significantly improves the systems error rate with the MRC combiner offering an optimal performance with respect to variation in atmospheric turbulence, change in links average received SNR and link range of the system.

29 CFR 780.144 - “As an incident to or in conjunction with” the farming operations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false âAs an incident to or in conjunction withâ the farming... in Conjunction Withâ the Farming Operations § 780.144 “As an incident to or in conjunction with” the... explained in §§ 780.129 through 780.143. They must also be performed “as an incident to or in conjunction...

Development of Real Time Implementation of 5/5 Rule based Fuzzy Logic Controller Shunt Active Power Filter for Power Quality Improvement

NASA Astrophysics Data System (ADS)

Puhan, Pratap Sekhar; Ray, Pravat Kumar; Panda, Gayadhar

2016-12-01

This paper presents the effectiveness of 5/5 Fuzzy rule implementation in Fuzzy Logic Controller conjunction with indirect control technique to enhance the power quality in single phase system, An indirect current controller in conjunction with Fuzzy Logic Controller is applied to the proposed shunt active power filter to estimate the peak reference current and capacitor voltage. Current Controller based pulse width modulation (CCPWM) is used to generate the switching signals of voltage source inverter. Various simulation results are presented to verify the good behaviour of the Shunt active Power Filter (SAPF) with proposed two levels Hysteresis Current Controller (HCC). For verification of Shunt Active Power Filter in real time, the proposed control algorithm has been implemented in laboratory developed setup in dSPACE platform.

On the Reality of Illusory Conjunctions.

PubMed

Botella, Juan; Suero, Manuel; Durán, Juan I

2017-01-01

The reality of illusory conjunctions in perception has been sometimes questioned, arguing that they can be explained by other mechanisms. Most relevant experiments are based on migrations along the space dimension. But the low rate of illusory conjunctions along space can easily hide them among other types of errors. As migrations over time are a more frequent phenomenon, illusory conjunctions can be disentangled from other errors. We report an experiment in which series of colored letters were presented in several spatial locations, allowing for migrations over both space and time. The distribution of frequencies were fit by several multinomial tree models based on alternative hypothesis about illusory conjunctions and the potential sources of free-floating features. The best-fit model acknowledges that most illusory conjunctions are migrations in the time domain. Migrations in space are probably present, but the rate is very low. Other conjunction errors, as those produced by guessing or miscategorizations of the to-be-reported feature, are also present in the experiment. The main conclusion is that illusory conjunctions do exist.

Parallelism Effects and Verb Activation: The Sustained Reactivation Hypothesis

PubMed Central

Shapiro, Lewis P.; Love, Tracy

2010-01-01

This study investigated the processes underlying parallelism by evaluating the activation of a parallel element (i.e., a verb) throughout and-coordinated sentences. Four points were tested: (1) approximately 1,600ms after the verb in the first conjunct (PP1), (2) immediately following the conjunction (PP2), (3) approximately 1,100ms after the conjunction (PP3), (4) at the end of the second conjunct (PP4). The results revealed no activation at PP1, suggesting activation related to the initial presentation had decayed by this point; however, activation was observed at PP2, PP3, and PP4, suggesting the conjunction elicits reactivation that is sustained throughout the second conjunct. These findings support a specific hypothesis about parallelism, the sustained reactivation hypothesis. This hypothesis claims that, in conjoined structures, a cue that is associated with parallelism elicits the reactivation of material from the first conjunct and that this activation is sustained until integration with the second conjunct can be completed. PMID:19774464

Parallelism effects and verb activation: the sustained reactivation hypothesis.

PubMed

Callahan, Sarah M; Shapiro, Lewis P; Love, Tracy

2010-04-01

This study investigated the processes underlying parallelism by evaluating the activation of a parallel element (i.e., a verb) throughout and-coordinated sentences. Four points were tested: (1) approximately 1,600 ms after the verb in the first conjunct (PP1), (2) immediately following the conjunction (PP2), (3) approximately 1,100 ms after the conjunction (PP3), (4) at the end of the second conjunct (PP4). The results revealed no activation at PP1, suggesting activation related to the initial presentation had decayed by this point; however, activation was observed at PP2, PP3, and PP4, suggesting the conjunction elicits reactivation that is sustained throughout the second conjunct. These findings support a specific hypothesis about parallelism, the sustained reactivation hypothesis. This hypothesis claims that, in conjoined structures, a cue that is associated with parallelism elicits the reactivation of material from the first conjunct and that this activation is sustained until integration with the second conjunct can be completed.

Jumpstarting Academic Careers: A Workshop and Tools for Career Development in Anesthesiology.

PubMed

Yanofsky, Samuel D; Voytko, Mary Lou; Tobin, Joseph R; Nyquist, Julie G

2011-01-01

Career development is essential and has the potential to assist in building a sustained faculty within academic departments of Anesthesiology. Career development is essential for growth in academic medicine. Close attention to the details involved in career management, goal setting as part of career planning, and professional networking are key elements. This article examines the specific educational strategies involved in a 120 minute workshop divided into four 25 minute segments with 20 minutes at the end for discussion for training junior faculty in career development. The teaching methods include 1) brief didactic presentations, 2) pre-workshop completion of two professional development tools, 3) facilitated small group discussion using trained facilitators and 4) use of a commitment to change format. Three major learning tools were utilized in conjunction with the above methods: a professional network survey, a career planning and development form and a commitment to change form. Forty one participants from 2009 reported 80 projected changes in their practice behaviors in relation to career management: Build or enhance professional network and professional mentoring (36.3%); Set career goals, make a plan, follow though, collaborate, publish (35.1%); Increase visibility locally or nationally (10.0%); Building core skills, such as clinical, teaching, leading (36.3%); Identify the criteria for promotion in own institution (5.0%); Improved methods of documentation (2.5%). Over the past two years, the workshop has been very well received by junior faculty, with over 95% marking each of the following items as excellent or good (presentation, content, audiovisuals and objectives met). The challenge for continuing development and promotion of academic anesthesiologists lies in the explicit training of faculty for career advancement. Designing workshops using educational tools to promote a reflective process of the faculty member is the one method to meet this challenge. We believe that this national workshop has initiated an increasing awareness of a core of junior faculty nationally having now delivered the material to almost 200 junior faculty and having trained seven facilitators in the usage of these materials.

A Look from the Inside

NASA Technical Reports Server (NTRS)

2004-01-01

NASA's Hubble Space Telescope has given the world amazing images of the distant stars, planets, and galaxies. The cutting-edge imaging technology that enhances the Hubble images also extends its benefits to life here on Earth, from deciphering previously unreadable portions of the Dead Sea Scrolls to improving digital mammographies for advanced cancer detection. This imaging technology is now helping physicians to perform micro-invasive arthroscopic surgery, which is the visual examination of an interior joint such as the knee. In 1997, NASA's Glenn Research Center signed a Space Act Agreement with Micro Medical Devices, Inc. (MMD), a medical device engineering company that licenses miniature surgical devices. At that time, MMD was in the process of developing a new micro-endoscope. This tool enables surgeons to view what is happening inside the body on a screen, eliminating the need for a more invasive diagnostic procedure. The images from the micro-endoscope needed to be extremely clear, a challenge with the tool s small size. The images also needed to be viewed in real time to allow surgeons to see what was happening in the body at that very moment. MMD established Clear Image Technology, LLC, of Elyria, Ohio, to commercialize the miniature endoscope. Clear Image Technology then partnered with Arthrotek, Inc., a sports medicine subsidiary of Biomet, Inc., to introduce the tool to the commercial market as the InnerVue[TM] Diagnostic Scope System. The InnerVue system is designed for use in a diagnostic environment, such as an office or outpatient service, to evaluate conditions within a joint. While the InnerVue scope is primarily being applied to the knee and shoulder, other small joints such as the wrist, elbow, and ankle are being investigated. A physician can use the system alone or in conjunction with magnetic resonance imaging (MRI) to determine the next treatment step for each patient. The procedure can be more accurate than MRI, particularly with diagnosing cartilage and articular surface damage and assessing arthritis severity.

Epidemiology of allergic conjunctivitis: clinical appearance and treatment patterns in a population-based study.

PubMed

Leonardi, Andrea; Castegnaro, Angela; Valerio, Alvise La Gloria; Lazzarini, Daniela

2015-10-01

To analyse the most recently published studies on the prevalence of allergic conjunctivitis alone or in association with allergic rhinitis, and the clinical and demographic aspects of the disease. Allergic conjunctivitis or conjunctival symptoms are present in 30-71% of patients with allergic rhinitis. Allergic conjunctivitis alone has been estimated in 6-30% of the general population and in up to 30% in children alone or in association with allergic rhinitis. Seasonal allergic conjunctivitis is the most frequent form; however, studies from tertiary, ophthalmology referral centers report that the chronic forms, such as vernal and atopic keratoconjunctivitis, are the most frequently seen by ophthalmologists. A recent large survey performed at a national level involving 304 ophthalmologists showed that the majority of patients with allergic conjunctivitis suffer annually of few episodes of mild ,intermittent conjunctivitis. However, 30% of patients are affected by frequent episodes with intense and persistent symptoms. Treatment is frequently not appropriate. Even though allergic conjunctivitis is often associated to allergic rhinitis, epidemiology studies frequently do not include specific ophthalmological evaluations. An understanding of allergic conjunctivitis disease, its prevalence, demographics and treatment paradigms will provide important information towards understanding its pharmacoeconomics and burden on the national health systems.

The role of parallelism in the real-time processing of anaphora.

PubMed

Poirier, Josée; Walenski, Matthew; Shapiro, Lewis P

2012-06-01

Parallelism effects refer to the facilitated processing of a target structure when it follows a similar, parallel structure. In coordination, a parallelism-related conjunction triggers the expectation that a second conjunct with the same structure as the first conjunct should occur. It has been proposed that parallelism effects reflect the use of the first structure as a template that guides the processing of the second. In this study, we examined the role of parallelism in real-time anaphora resolution by charting activation patterns in coordinated constructions containing anaphora, Verb-Phrase Ellipsis (VPE) and Noun-Phrase Traces (NP-traces). Specifically, we hypothesised that an expectation of parallelism would incite the parser to assume a structure similar to the first conjunct in the second, anaphora-containing conjunct. The speculation of a similar structure would result in early postulation of covert anaphora. Experiment 1 confirms that following a parallelism-related conjunction, first-conjunct material is activated in the second conjunct. Experiment 2 reveals that an NP-trace in the second conjunct is posited immediately where licensed, which is earlier than previously reported in the literature. In light of our findings, we propose an intricate relation between structural expectations and anaphor resolution.

The role of parallelism in the real-time processing of anaphora

PubMed Central

Poirier, Josée; Walenski, Matthew; Shapiro, Lewis P.

2012-01-01

Parallelism effects refer to the facilitated processing of a target structure when it follows a similar, parallel structure. In coordination, a parallelism-related conjunction triggers the expectation that a second conjunct with the same structure as the first conjunct should occur. It has been proposed that parallelism effects reflect the use of the first structure as a template that guides the processing of the second. In this study, we examined the role of parallelism in real-time anaphora resolution by charting activation patterns in coordinated constructions containing anaphora, Verb-Phrase Ellipsis (VPE) and Noun-Phrase Traces (NP-traces). Specifically, we hypothesised that an expectation of parallelism would incite the parser to assume a structure similar to the first conjunct in the second, anaphora-containing conjunct. The speculation of a similar structure would result in early postulation of covert anaphora. Experiment 1 confirms that following a parallelism-related conjunction, first-conjunct material is activated in the second conjunct. Experiment 2 reveals that an NP-trace in the second conjunct is posited immediately where licensed, which is earlier than previously reported in the literature. In light of our findings, we propose an intricate relation between structural expectations and anaphor resolution. PMID:23741080

Secure Web-based Ground System User Interfaces over the Open Internet

NASA Technical Reports Server (NTRS)

Langston, James H.; Murray, Henry L.; Hunt, Gary R.

1998-01-01

A prototype has been developed which makes use of commercially available products in conjunction with the Java programming language to provide a secure user interface for command and control over the open Internet. This paper reports successful demonstration of: (1) Security over the Internet, including encryption and certification; (2) Integration of Java applets with a COTS command and control product; (3) Remote spacecraft commanding using the Internet. The Java-based Spacecraft Web Interface to Telemetry and Command Handling (Jswitch) ground system prototype provides these capabilities. This activity demonstrates the use and integration of current technologies to enable a spacecraft engineer or flight operator to monitor and control a spacecraft from a user interface communicating over the open Internet using standard World Wide Web (WWW) protocols and commercial off-the-shelf (COTS) products. The core command and control functions are provided by the COTS Epoch 2000 product. The standard WWW tools and browsers are used in conjunction with the Java programming technology. Security is provided with the current encryption and certification technology. This system prototype is a step in the direction of giving scientist and flight operators Web-based access to instrument, payload, and spacecraft data.

Accuracy and precision of stream reach water surface slopes estimated in the field and from maps

USGS Publications Warehouse

Isaak, D.J.; Hubert, W.A.; Krueger, K.L.

1999-01-01

The accuracy and precision of five tools used to measure stream water surface slope (WSS) were evaluated. Water surface slopes estimated in the field with a clinometer or from topographic maps used in conjunction with a map wheel or geographic information system (GIS) were significantly higher than WSS estimated in the field with a surveying level (biases of 34, 41, and 53%, respectively). Accuracy of WSS estimates obtained with an Abney level did not differ from surveying level estimates, but conclusions regarding the accuracy of Abney levels and clinometers were weakened by intratool variability. The surveying level estimated WSS most precisely (coefficient of variation [CV] = 0.26%), followed by the GIS (CV = 1.87%), map wheel (CV = 6.18%), Abney level (CV = 13.68%), and clinometer (CV = 21.57%). Estimates of WSS measured in the field with an Abney level and estimated for the same reaches with a GIS used in conjunction with l:24,000-scale topographic maps were significantly correlated (r = 0.86), but there was a tendency for the GIS to overestimate WSS. Detailed accounts of the methods used to measure WSS and recommendations regarding the measurement of WSS are provided.

The DROPPS/MIDAS Campaign Neutral Atmosphere Measurements and the Occurrence of PMSE and NLC

NASA Technical Reports Server (NTRS)

Schmidlin, F. J.; Schauer, A. G.; Zukor, Dorothy J. (Technical Monitor)

2001-01-01

Measurements of the neutral atmosphere and their relationship to electrodynamic conditions in the mesosphere have been of interest for many years. Inflatable falling sphere measurements along with electrodynamic measurements were obtained in conjunction with the occurrence of PMSE and NLC during the DROPPS/MIDAS Campaign conducted in July 1999 from Andenes Rocket Range, Norway. The inflatable failing sphere measurements in conjunction with a PMSE event on 5-6 July and with a NLC event on 14 July are used to infer thermal advection and its influence on the clouds' maintenance. Hodograph analysis, an early tropospheric tool used by analyst and forecasters, will be used to determine the magnitude and direction of thermal advection from measured wind data. Analysis of the wind structure through the use of hodographs and some assumptions can determine thermal advection, wind shear, and possible vertical motion. Changes in the temperature structure between allied observations were subtle which may be explained by advection. Because of meteorological instabilities in the mesosphere it is possible that hodograph analysis may not fully work. It is our intention to show that such analysis has value and has a place in the mesosphere.

Strengthened IAEA Safeguards-Imagery Analysis: Geospatial Tools for Nonproliferation Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pabian, Frank V

2012-08-14

This slide presentation focuses on the growing role and importance of imagery analysis for IAEA safeguards applications and how commercial satellite imagery, together with the newly available geospatial tools, can be used to promote 'all-source synergy.' As additional sources of openly available information, satellite imagery in conjunction with the geospatial tools can be used to significantly augment and enhance existing information gathering techniques, procedures, and analyses in the remote detection and assessment of nonproliferation relevant activities, facilities, and programs. Foremost of the geospatial tools are the 'Digital Virtual Globes' (i.e., GoogleEarth, Virtual Earth, etc.) that are far better than previouslymore » used simple 2-D plan-view line drawings for visualization of known and suspected facilities of interest which can be critical to: (1) Site familiarization and true geospatial context awareness; (2) Pre-inspection planning; (3) Onsite orientation and navigation; (4) Post-inspection reporting; (5) Site monitoring over time for changes; (6) Verification of states site declarations and for input to State Evaluation reports; and (7) A common basis for discussions among all interested parties (Member States). Additionally, as an 'open-source', such virtual globes can also provide a new, essentially free, means to conduct broad area search for undeclared nuclear sites and activities - either alleged through open source leads; identified on internet BLOGS and WIKI Layers, with input from a 'free' cadre of global browsers and/or by knowledgeable local citizens (a.k.a.: 'crowdsourcing'), that can include ground photos and maps; or by other initiatives based on existing information and in-house country knowledge. They also provide a means to acquire ground photography taken by locals, hobbyists, and tourists of the surrounding locales that can be useful in identifying and discriminating between relevant and non-relevant facilities and their associated infrastructure. The digital globes also provide highly accurate terrain mapping for better geospatial context and allow detailed 3-D perspectives of all sites or areas of interest. 3-D modeling software (i.e., Google's SketchUp6 newly available in 2007) when used in conjunction with these digital globes can significantly enhance individual building characterization and visualization (including interiors), allowing for better assessments including walk-arounds or fly-arounds and perhaps better decision making on multiple levels (e.g., the best placement for International Atomic Energy Agency (IAEA) video monitoring cameras).« less

Development of a 3D workspace shoulder assessment tool incorporating electromyography and an inertial measurement unit-a preliminary study.

PubMed

Aslani, Navid; Noroozi, Siamak; Davenport, Philip; Hartley, Richard; Dupac, Mihai; Sewell, Philip

2018-06-01

Traditional shoulder range of movement (ROM) measurement tools suffer from inaccuracy or from long experimental setup times. Recently, it has been demonstrated that relatively low-cost wearable inertial measurement unit (IMU) sensors can overcome many of the limitations of traditional motion tracking systems. The aim of this study is to develop and evaluate a single IMU combined with an electromyography (EMG) sensor to monitor the 3D reachable workspace with simultaneous measurement of deltoid muscle activity across the shoulder ROM. Six volunteer subjects with healthy shoulders and one participant with a 'frozen' shoulder were recruited to the study. Arm movement in 3D space was plotted in spherical coordinates while the relative EMG intensity of any arm position is presented graphically. The results showed that there was an average ROM surface area of 27291 ± 538 deg 2 among all six healthy individuals and a ROM surface area of 13571 ± 308 deg 2 for the subject with frozen shoulder. All three sections of the deltoid show greater EMG activity at higher elevation angles. Using such tools enables individuals, surgeons and physiotherapists to measure the maximum envelope of motion in conjunction with muscle activity in order to provide an objective assessment of shoulder performance in the voluntary 3D workspace. Graphical abstract The aim of this study is to develop and evaluate a single IMU combined with an electromyography (EMG) sensor to monitor the 3D reachable workspace with simultaneous measurement of deltoid muscle activity across the shoulder ROM. The assessment tool consists of an IMU sensor, an EMG sensor, a microcontroller and a Bluetooth module. The assessment tool was attached to subjects arm. Individuals were instructed to move their arms with the elbow fully extended. They were then asked to provide the maximal voluntary elevation envelope of the arm in 3D space in multiple attempts starting from a small movement envelope going to the biggest possible in four consecutive circuits. The results showed that there was an average ROM surface area of 27291 ± 538 deg2 among all six healthy individuals and a ROM surface area of 13571 ± 308 deg2 for the subject with frozen shoulder. All three sections of the deltoid show greater EMG activity at higher elevation angles. Using such tools enables individuals, surgeons and physiotherapists to measure the maximum envelope of motion in conjunction with muscle activity in order to provide an objective assessment of shoulder performance in the voluntary 3D workspace.

Clinical efficacy of melittin in the treatment of cats infected with the feline immunodeficiency virus.

PubMed

Hartmann, Anja D; Wilhelm, Natalie; Erfle, Volker; Hartmann, Katrin

2016-12-05

The bee venom melittin shows an antiviral efficacy against the human immunodeficiency virus in cell culture. It was shown to be non-toxic for cats. Aim of this pilot study was to investigate the clinical efficacy and side-effects of melittin in cats naturally infected with feline immunodeficiency virus (FIV). The study was performed as a prospective, placebo-controlled double-blinded trial. Twenty cats were included, of which 10 cats each were treated with either melittin (500 µg/kg body weight) or phosphate-buffered saline (placebo) subcutaneously twice per week. During the treatment period of 6 weeks, the cats' general health status, determined by the Karnofsky's score, and the severity of clinical signs (conjunctivitis and stomatitis) using a clinical scoring system were evaluated. Haematology, biochemistry profiles, lymphocyte subpopulations, CD4/CD8 ratio, and pterines (biopterine, 7-xanthopterine) as surrogate parameters were also compared. The general health status and the clinical scores for conjunctivitis and stomatitis improved in cats treated with melittin. A statistically significant improvement however could only be detected for conjunctivitis in cats treated with melittin compared to cats treated with placebo which was likely due to different scores between both groups at the beginning. No influence on the lymphocyte subpopulations, CD4/CD8 ratio, and pterine concentrations was observed. No side effects occurred in this study. In the protocol used in the present study, no significant efficacy of melittin could be detected. However, efficacy of melittin, especially if applied in a higher dosage as in the present study or for a longer period, could be evaluated in further studies. Synergistic effects if used in combination with classic antiretroviral drugs could be an interesting future approach.

Technological Advances In The Surgical Treatment Of Movement Disorders

PubMed Central

Gross, Robert E.; McDougal, Margaret E.

2013-01-01

Technological innovations have driven the advancement of the surgical treatment of movement disorders, from the invention of the stereotactic frame to the adaptation of deep brain stimulation (DBS). Along these lines, this review will describe recent advances in getting neuromodulation modalities, including DBS, to the target; and in the delivery of therapy at the target. Recent radiological advances are altering the way that DBS leads are targeted and inserted, by refining the ability to visualize the subcortical targets using high-field strength MRI and other innovations such as diffusion tensor imaging, and the development of novel targeting devices enabling purely anatomical implantations without the need for neurophysiological monitoring. New portable CT scanners also are facilitating lead implantation without monitoring as well as improving radiological verification of DBS lead location. Advances in neurophysiological mapping include efforts to develop automatic target verification algorithms, and probabilistic maps to guide target selection. The delivery of therapy at the target is being improved by the development of the next generation of internal pulse generators (IPGs). These include constant current devices that mitigate the variability introduced by impedance changes of the stimulated tissue, and in the near future, devices that deliver novel stimulation patterns with improved efficiency. Closed-loop adaptive IPGs are being tested, which may tailor stimulation to ongoing changes in the nervous system reflected in Œbiomarkers1 continuously recorded by the devices. Finer grained DBS leads, in conjunction with new IPGs and advanced programming tools, may offer improved outcomes via Œcurrent steering1 algorithms. Finally, even thermocoagulation - essentially replaced by DBS - is being advanced by new Œminimally-invasive1 approaches that may improve this therapy for selected patients in whom it may be preferred. Functional neurosurgery has a history of being driven by technological innovation, a tradition that continues into its future. PMID:23812894

NASA's Spaceliner Investment Area Technology Activities

NASA Technical Reports Server (NTRS)

Hueter, Uwe; Lyles, Garry M. (Technical Monitor)

2001-01-01

NASA's has established long term goals for access-to-space. The third generation launch systems are to be fully reusable and operational around 2025. The goals for the third generation launch system are to significantly reduce cost and improve safety over current conditions. The Advanced Space Transportation Program Office (ASTP) at the NASA's Marshall Space Flight Center in Huntsville, AL has the agency lead to develop space transportation technologies. Within ASTP, under the Spaceliner Investment Area, third generation technologies are being pursued in the areas of propulsion, airframes, integrated vehicle health management (IVHM), avionics, power, operations, and range. The ASTP program will mature these technologies through both ground and flight system testing. The Spaceliner Investment Area plans to mature vehicle technologies to reduce the implementation risks for future commercially developed reusable launch vehicles (RLV). The plan is to substantially increase the design and operating margins of the third generation RLV (the Space Shuttle is the first generation) by incorporating advanced technologies in propulsion, materials, structures, thermal protection systems, avionics, and power. Advancements in design tools and better characterization of the operational environment will allow improvements in design margins. Improvements in operational efficiencies will be provided through use of advanced integrated health management, operations, and range technologies. The increase in margins will allow components to operate well below their design points resulting in improved component operating life, reliability, and safety which in turn reduces both maintenance and refurbishment costs. These technologies have the potential of enabling horizontal takeoff by reducing the takeoff weight and achieving the goal of airline-like operation. These factors in conjunction with increased flight rates from an expanding market will result in significant improvements in safety and reductions in operational costs of future vehicles. The paper describes current status, future plans and technologies that are being matured by the Spaceliner Investment Area under the Advanced Space Transportation Program Office.

SHORT-TERM EFFECTS OF INSTRUMENT-ASSISTED SOFT TISSUE MOBILIZATION ON PAIN FREE RANGE OF MOTION IN A WEIGHTLIFTER WITH SUBACROMIAL PAIN SYNDROME.

PubMed

Coviello, Joseph Paul; Kakar, Rumit Singh; Reynolds, Timothy James

2017-02-01

While there is limited evidence supporting the use of soft tissue mobilization techniques for Subacromial Pain Syndrome (SAPS), synonymous with subacromial impingement syndrome, previous studies have reported successful outcomes using soft tissue mobilization as a treatment technique. The purpose of this case report is to document the results of Instrument-Assisted Soft Tissue Mobilization (IASTM) for the treatment of SAPS. Diagnosis was reached based on the subject's history, tenderness to palpation, and four out of five positive tests in the diagnostic cluster. Treatment consisted of three visits where the IASTM technique was applied to the pectoral muscles as well as periscapular musculature followed by retesting pain-free shoulder flexion active range of motion (AROM) and Numerical Pain Rating Scale (NPRS) during active shoulder flexion. Scapulothoracic mobilization and stretching were performed after AROM measurement. The subject reported an NPRS of 0/10 and demonstrated improvements in pain free flexion AROM in each of the three treatment sessions post-IASTM: 85 ° to 181 °, 110 ° to 171 °, and 163 ° to 174 ° with some carryover in pain reduction and pain free AROM to the next treatment. Through three treatments, DASH score improved by 17.34%, Penn Shoulder Score improved 29%, worst NPRS decreased from 4/10 to 0/10, and a GROC score of 6. IASTM may have a beneficial acute effect on pain free shoulder flexion. In conjunction with scapulothoracic mobilizations and stretching, IASTM may improve function, decrease pain, and improve patient satisfaction. While this technique will not ameliorate the underlying pathomechanics contributing to SAPS, it may serve as a valuable tool to restore ROM and decrease pain allowing the patient to reap the full benefits of a multi-modal treatment approach. 5.

Attribute conjunctions and the part configuration advantage in object category learning.

PubMed

Saiki, J; Hummel, J E

1996-07-01

Five experiments demonstrated that in object category learning people are particularly sensitive to conjunctions of part shapes and relative locations. Participants learned categories defined by a part's shape and color (part-color conjunctions) or by a part's shape and its location relative to another part (part-location conjunctions). The statistical properties of the categories were identical across these conditions, as were the salience of color and relative location. Participants were better at classifying objects defined by part-location conjunctions than objects defined by part-color conjunctions. Subsequent experiments revealed that this effect was not due to the specific color manipulation or the role of location per se. These results suggest that the shape bias in object categorization is at least partly due to sensitivity to part-location conjunctions and suggest a new processing constraint on category learning.

Community integration after traumatic brain injury: a systematic review of the clinical implications of measurement and service provision for older adults.

PubMed

Ritchie, Linda; Wright-St Clair, Valerie A; Keogh, Justin; Gray, Marion

2014-01-01

To explore the scope, reliability, and validity of community integration measures for older adults after traumatic brain injury (TBI). A search of peer-reviewed articles in English from 1990 to April 2011 was conducted using the EBSCO Health and Scopus databases. Search terms included were community integration, traumatic brain injury or TBI, 65 plus or older adults, and assessment. Forty-three eligible articles were identified, with 11 selected for full review using a standardized critical review method. Common community integration measures were identified and ranked for relevance and psychometric properties. Of the 43 eligible articles, studies reporting community integration outcomes post-TBI were identified and critically reviewed. Older adults' community integration needs post-TBI from high quality studies were summarized. There is a relative lack of evidence pertaining to older adults post-TBI, but indicators are that older adults have poorer outcomes than their younger counterparts. The Community Integration Questionnaire (CIQ) is the most widely used community integration measurement tool used in research for people with TBI. Because of some limitations, many studies have used the CIQ in conjunction with other measures to better quantify and/or monitor changes in community integration. Enhancing integration of older adults after TBI into their community of choice, with particular emphasis on social integration and quality of life, should be a primary rehabilitation goal. However, more research is needed to inform best practice guidelines to meet the needs of this growing TBI population. It is recommended that subjective tools, such as quality of life measures, are used in conjunction with well-established community integration measures, such as the CIQ, during the assessment process. Copyright © 2014 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Physical Examination Tools Used to Identify Swollen and Tender Lower Limb Joints in Juvenile Idiopathic Arthritis: A Scoping Review.

PubMed

Fellas, Antoni; Singh-Grewal, Davinder; Santos, Derek; Coda, Andrea

2018-01-01

Juvenile idiopathic arthritis (JIA) is the most common form of rheumatic disease in childhood and adolescents, affecting between 16 and 150 per 100,000 young persons below the age of 16. The lower limb is commonly affected in JIA, with joint swelling and tenderness often observed as a result of active synovitis. The objective of this scoping review is to identify the existence of physical examination (PE) tools to identify and record swollen and tender lower limb joints in children with JIA. Two reviewers individually screened the eligibility of titles and abstracts retrieved from the following online databases: MEDLINE, EMBASE, Cochrane Central Register of Controlled Trials, and CINAHL. Studies that proposed and validated a comprehensive lower limb PE tool were included in this scoping review. After removal of duplicates, 1232 citations were retrieved, in which twelve were identified as potentially eligible. No studies met the set criteria for inclusion. Further research is needed in developing and validating specific PE tools for clinicians such as podiatrists and other allied health professionals involved in the management of pathological lower limb joints in children diagnosed with JIA. These lower limb PE tools may be useful in conjunction with existing disease activity scores to optimise screening of the lower extremity and monitoring the efficacy of targeted interventions.

Trachoma

MedlinePlus

Granular conjunctivitis; Egyptian ophthalmia; Conjunctivitis - granular; Conjunctivitis - chlamydia ... Trachoma is caused by infection with the bacteria Chlamydia trachomatis . The condition occurs around the world. It ...

Reducing the Familiarity of Conjunction Lures with Pictures

ERIC Educational Resources Information Center

Lloyd, Marianne E.

2013-01-01

Four experiments were conducted to test whether conjunction errors were reduced after pictorial encoding and whether the semantic overlap between study and conjunction items would impact error rates. Across 4 experiments, compound words studied with a single-picture had lower conjunction error rates during a recognition test than those words…

Deriving the Distribution of Conjunctions.

ERIC Educational Resources Information Center

Zoerner, Ed

1994-01-01

This paper proposes an explanation for the limited possibilities of realized conjunctions in multitermed coordinations. It argues that conjunction "&" heads a fully articulated phrase (&P), which can iterate &P shells, similar to "V" in Larson's (1988) VP-shell hypothesis. This structure enables a single & to unify any number of conjuncts, and…

Extensional versus Intuitive Reasoning: The Conjunction Fallacy in Probability Judgment.

ERIC Educational Resources Information Center

Tversky, Amos; Kahneman, Daniel

1983-01-01

Judgments under uncertainty are often mediated by intuitive heuristics that are not bound by the conjunction rule of probability. Representativeness and availability heuristics can make a conjunction appear more probable than one of its constituents. Alternative interpretations of this conjunction fallacy are discussed and attempts to combat it…

South Australia's River Murray: Social and cultural values in water planning

NASA Astrophysics Data System (ADS)

Mooney, Carla; Tan, Poh-Ling

2012-12-01

SummaryThe South Australian River Murray is at the end of the Murray-Darling Basin which spans four Australian states, and is reliant on upstream flow. Under the Murray-Darling Basin Agreement, South Australia has an annual entitlement of 1850 GL flow. In the recent debilitating drought, the Agreement was put 'on hold' while emergency sharing arrangements provided for critical human needs, with meagre supplies for any other consumptive use. The drought also impacted on environmental values already compromised by river regulation and the high levels of water consumption. Conducted during the policy development phase of a second water allocation plan, our research trialled three tools designed to assess economic, social and cultural values for the new plan. The first was a pilot social impact study of effects of changing water availability in the Murraylands. In the second, researchers used a participatory modelling tool conjunctively with multi-criteria analysis to identify community values relevant to the prioritisation of environmental assets in the context of water scarcity. The third tool addressed Indigenous cultural values associated with water. Results of trials demonstrate that identifying public and social values in water require a number of interactive and deliberative tools in order to engage the broad community in water planning. Of the three tools, the most innovative was the second tool as it facilitated deliberation about the relative importance of the environment and helped shift individuals from entrenched interest based positions to consensus on values in wetlands.

Collision Avoidance Short Course: Conjunction Assessment Risk Analysis - NASA Robotic CARA. Part I: ; Theory

NASA Technical Reports Server (NTRS)

Hejduk, M. D.; Frigm, Ryan C.

2015-01-01

Satellite conjunction assessment is perhaps the fastest growing area in space situational awareness and protection with military, civil and commercial satellite owner-operators embracing more and more sophisticated processes to avoid the avoidable - namely collisions between high value space assets and orbital debris. NASA and Centre National d'Etudes Spatiales (CNES) have collaborated to offer an introductory short course on all the major aspects of the conjunctions assessment problem. This half-day course will cover satellite conjunction dynamics and theory. Joint Space Operations Center (JsPOC) conjunction data products, major risk assessment parameters and plots, conjunction remediation decision support, and present and future challenges. This briefing represents the NASA portion of the course.

Open Rotor Tone Shielding Methods for System Noise Assessments Using Multiple Databases

NASA Technical Reports Server (NTRS)

Bahr, Christopher J.; Thomas, Russell H.; Lopes, Leonard V.; Burley, Casey L.; Van Zante, Dale E.

2014-01-01

Advanced aircraft designs such as the hybrid wing body, in conjunction with open rotor engines, may allow for significant improvements in the environmental impact of aviation. System noise assessments allow for the prediction of the aircraft noise of such designs while they are still in the conceptual phase. Due to significant requirements of computational methods, these predictions still rely on experimental data to account for the interaction of the open rotor tones with the hybrid wing body airframe. Recently, multiple aircraft system noise assessments have been conducted for hybrid wing body designs with open rotor engines. These assessments utilized measured benchmark data from a Propulsion Airframe Aeroacoustic interaction effects test. The measured data demonstrated airframe shielding of open rotor tonal and broadband noise with legacy F7/A7 open rotor blades. Two methods are proposed for improving the use of these data on general open rotor designs in a system noise assessment. The first, direct difference, is a simple octave band subtraction which does not account for tone distribution within the rotor acoustic signal. The second, tone matching, is a higher-fidelity process incorporating additional physical aspects of the problem, where isolated rotor tones are matched by their directivity to determine tone-by-tone shielding. A case study is conducted with the two methods to assess how well each reproduces the measured data and identify the merits of each. Both methods perform similarly for system level results and successfully approach the experimental data for the case study. The tone matching method provides additional tools for assessing the quality of the match to the data set. Additionally, a potential path to improve the tone matching method is provided.

Evaluation of novel scoring system named 5-5-5 exacerbation grading scale for allergic conjunctivitis disease.

PubMed

Shoji, Jun; Inada, Noriko; Sawa, Mitsuru

2009-12-01

The objective of this study is to evaluate the practical usefulness of a scoring system using the 5-5-5 exacerbation grading scale for allergic conjunctivitis disease (ACD). Subjects were 103 patients with ACD including 40 patients with vernal keratoconjunctivitis (VKC), 20 patients with atopic keratoconjunctivitis (AKC), and 43 patients with allergic conjunctivitis (AC). The 5-5-5 exacerbation grading scale consists of the following 3 graded groups of clinical observations: the 100-point-grade group (100 points for each observation) includes active giant papillae, gelatinous infiltrates of the limbus, exfoliative epithelial keratopathy, shield ulcer and papillary proliferation at lower palpebral conjunctiva; the 10-point-grade group (10 points for each observation) includes blepharitis, papillary proliferation with velvety appearance, Horner-Trantas spots, edema of bulbal conjunctiva, and superficial punctate keratopathy; and the 1-point-grade group (1 point for each observation) includes papillae at upper palpebral conjunctiva, follicular lesion at lower palpebral conjunctiva, hyperemia of palpebral conjunctiva, hyperemia of bulbal conjunctiva, and lacrimal effusion. The total points in each grade group were determined as the severity score of the 5-5-5 exacerbation grading scale. The median severity scores of the 5-5-5 exacerbation grading scale in VKC, AKC and AC were 243 (range: 12-444), 32.5 (11-344), and 13 (2-33), respectively. The severity score of each ACD disease type was significantly different (P < 0.001, Kruskal-Wallis test). The severity of each type of ACD was classified as severe, moderate, or mild according to the severity score. The 5-5-5 exacerbation grading scale is a useful clinical tool for grading the severity of each type of ACD.

Tool wear mechanisms in turning titanium-aluminum-vanadium using tungsten carbide and polycrystalline diamond inserts

NASA Astrophysics Data System (ADS)

Schrock, David James

The objective of this work is to identify some of the tool wear mechanisms at the material level for the machining of titanium and to provide some understanding of these mechanisms for use in physics based tool wear models. Turning experiments were conducted at cutting speeds of 61m/min, 91m/min, and 122m/min on Ti-6Al-4V, an alloy of titanium, using two different grades of tungsten carbide cutting inserts and one grade of polycrystalline diamond inserts. Three-dimensional wear data and two-dimensional wear profiles of the rake face were generated using Confocal Laser Scanning Microscopy to quantify the tool wear mechanisms. Additionally, the microstructure of the deformed work material (chip) and un-deformed parent material (work piece) were studied using Orientation Imaging Microscopy (OIM). Observations from tool wear studies on the PCD inserts revealed the presence of two fundamentally different wear mechanisms operating at the different cutting speeds. Microstructural analyses of the chip and the work material showed phase dependent tool wear mechanisms for machining titanium. There is a high likelihood of phase change occurring in the work material during machining, with a transformation from the alpha phase to the beta phase. The observed dramatic increase in wear is attributed to a combination of increased diffusivity in the beta phase of the titanium alloy in conjunction with a higher degree of recrystallization of the prior beta phase upon cooling. Results of other observations such as the influence of carbide grain size on tool wear are also discussed.