Meeuwig, M.H.; Dunham, J.B.; Hayes, J.P.; Vinyard, G.L.
2004-01-01
The effects of constant (12, 18, and 24 A?C) and cyclical (daily variation of 15a??21 and 12a??24 A?C) thermal regimes on the growth and feeding of Lahontan cutthroat trout (Oncorhynchus clarki henshawi) of variable sizes were examined. Higher constant temperatures (i.e., 24 A?C) and more variable daily temperatures (i.e., 12a??24 A?C daily cycle) negatively affected growth rates. As fish mass increased (from 0.24 to 15.52 g) the effects of different thermal regimes on mass growth became more pronounced. Following 14 days exposure to the thermal regimes, feeding rates of individual fish were assessed during acute exposure (40 min) to test temperatures of 12, 18, and 24 A?C. Feeding rate was depressed during acute exposure to 24 A?C, but was not significantly affected by the preceding thermal regime. Our results indicate that even brief daily exposure to higher temperatures (e.g., 24 A?C) can have considerable sublethal effects on cutthroat trout, and that fish size should be considered when examining the effects of temperature.
Fouling resilient perforated feed spacers for membrane filtration.
Kerdi, Sarah; Qamar, Adnan; Vrouwenvelder, Johannes S; Ghaffour, Noreddine
2018-04-24
The improvement of feed spacers with optimal geometry remains a key challenge for spiral-wound membrane systems in water treatment due to their impact on the hydrodynamic performance and fouling development. In this work, novel spacer designs are proposed by intrinsically modifying cylindrical filaments through perforations. Three symmetric perforated spacers (1-Hole, 2-Hole, and 3-Hole) were in-house 3D-printed and experimentally evaluated in terms of permeate flux, feed channel pressure drop and membrane fouling. Spacer performance is characterized and compared with standard no perforated (0-Hole) design under constant feed pressure and constant feed flow rate. Perforations in the spacer filaments resulted in significantly lowering the net pressure drop across the spacer filled channel. The 3-Hole spacer was found to have the lowest pressure drop (50%-61%) compared to 0-Hole spacer for various average flow velocities. Regarding permeate flux production, the 0-Hole spacer produced 5.7 L m -2 .h -1 and 6.6 L m -2 .h -1 steady state flux for constant pressure and constant feed flow rate, respectively. The 1-Hole spacer was found to be the most efficient among the perforated spacers with 75% and 23% increase in permeate production at constant pressure and constant feed flow, respectively. Furthermore, membrane surface of 1-Hole spacer was found to be cleanest in terms of fouling, contributing to maintain higher permeate flux production. Hydrodynamic understanding of these perforated spacers is also quantified by performing Direct Numerical Simulation (DNS). The performance enhancement of these perforated spacers is attributed to the formation of micro-jets in the spacer cell that aided in producing enough unsteadiness/turbulence to clean the membrane surface and mitigate fouling phenomena. In the case of 1-Hole spacer, the unsteadiness intensity at the outlet of micro-jets and the shear stress fluctuations created inside the cells are higher than those observed with other perforated spacers, resulting in the cleanest membrane surface. Copyright © 2018 Elsevier Ltd. All rights reserved.
Regulator for intravenous feeding
NASA Technical Reports Server (NTRS)
Dimeff, J.
1975-01-01
Float valve maintains constant level of solution, providing constant drop rate as long as solution can flow into patient's vein. Second float valve allows solution to enter vein, but prevents entry of air.
Beringer, Paul; Nguyen, Megan; Hoem, Nils; Louie, Stan; Gill, Mark; Gurevitch, Michael; Wong-Beringer, Annie
2005-01-01
Linezolid is a new antimicrobial agent effective against drug-resistant gram-positive pathogens which are common causes of infections in hospitalized patients. Many such patients rely on the intravenous or enteral route for nutrition and drug administration. Therefore, the bioavailability of linezolid administered enterally in the presence of enteral feedings in hospitalized patients was examined. Eighteen subjects were assessed in a randomized single-dose crossover study; 12 received continuous enteral feedings, while 6 did not (controls). Both groups received linezolid 600 mg intravenously and orally (control) or enterally, with the alternate route of administration separated by a 24-h washout period. Pharmacokinetic parameters derived from noncompartmental and compartmental analysis incorporating linear and nonlinear elimination pathways were compared between groups: F, Ka, Vs, K23, K32, Vmax, Km, and K20 (bioavailability, absorption rate constant, volume of central compartment normalized to body weight, intercompartmental rate constants, maximum velocity, Michaelis-Menten constant, and elimination rate constant, respectively). Pharmacokinetic (PK) data were available from 17 patients. The linezolid oral suspension was rapidly and completely absorbed by either the oral or enteral route of administration. Bioavailability was unaltered in the presence of enteral feedings. PK estimates remain similar regardless of the model applied. At the therapeutic dose used, only slight nonlinearity in elimination was observed. A linezolid oral suspension may be administered via the enteral route to hospitalized patients without compromise in its excellent bioavailability and rapid rate of absorption. Compartmental pharmacokinetic analysis offers a more flexible study application, since bioavailability (F) can be estimated directly with intermixed intravenous/oral doses without a need for a washout period. PMID:16127039
NASA Technical Reports Server (NTRS)
Feagans, P. L.
1972-01-01
Electro-chemical grinding technique has rotation speed control, constant feed rates, and contour control. Hypersonic engine parts of nickel alloys can be almost 100% machined, keeping tool pressure at virtual zero. Technique eliminates galling and permits constant surface finish and burr-free interrupted cutting.
Separation of Gadolinium (Gd) using Synergic Solvent Mixed Topo-D2EHPA with Extraction Method.
NASA Astrophysics Data System (ADS)
Effendy, N.; Basuki, K. T.; Biyantoro, D.; Perwira, N. K.
2018-04-01
The main problem to obtain Gd with high purity is the similarity of chemical properties and physical properties with the other rare earth elements (REE) such as Y and Dy, it is necessary to do separation by the extraction process. The purpose of this research to determine the best solvent type, amount of solvent, feed and solvent ratio in the Gd extraction process, to determine the rate order and the value of the rate constant of Gd concentration based on experimental data of aqueous phase concentration as a function of time and to know the effect of temperature on the reaction speed constant. This research was conducted on variation of solvent, amount of solvent, feed and solvent ratio in the extraction process of Gd separation, extraction time to determine the order value and the rate constant of Gd concentration in extraction process based on the aqueous phase concentration data as a function of time, to the rate constant of decreasing concentration of Gd. Based on the calculation results, the solvent composition was obtained with the best feed to separate the rare earth elements Gd in the extraction process is 1 : 4 with 15% concentration of TOPO and 10% concentration of D2EHPA. The separation process of Gd using extraction method by solvent TOPO-D2EHPA 2 : 1 comparison is better than single solvent D2EHPA / TOPO because of the synergistic effect. The rate order of separation process of Gd follows order 1. The Arrhenius Gd equation becomes k = 1.46 x 10-7 exp (-6.96 kcal / mol / RT).
Experimental Assessment of the Reciprocating Feed System
NASA Technical Reports Server (NTRS)
Eddleman, David E.; Blackmon, James B.; Morton, Christopher D.
2006-01-01
The primary goal of this project was to design, construct, and test a full scale, high pressure simulated propellant feed system test bed that could evaluate the ability of the Reciprocating Feed System (RFS) to provide essentially constant flow rates and pressures to a rocket engine. The two key issues addressed were the effects of the transition of the drain cycle from tank to tank and the benefits of other hardware such as accumulators to provide a constant pressure flow rate out of the RFS. The test bed provided 500 psi flow at rates of the order of those required for engines in the 20,000 lbf thrust class (e.g., 20 to 40 lb/sec). A control system was developed in conjunction with the test article and automated system operation was achieved. Pre-test planning and acceptance activities such as a documented procedure and hazard analysis were conducted and the operation of the test article was approved by, and conducted in coordination with, appropriate NASA Marshall Space Flight Center personnel under a Space Act Agreement. Tests demonstrated successful control of flow rates and pressures.
NASA Astrophysics Data System (ADS)
Markanday, H.; Nagarajan, D.
2018-02-01
Incremental sheet forming (ISF) is a novel die-less sheet metal forming process, which can produce components directly from the CAD geometry using a CNC milling machine at less production time and cost. The formability of the sheet material used is greatly affected by the process parameters involved and tool path adopted, and the present study is aimed to investigate the influence of different process parameter values using the helical tool path strategy on the formability of a commercial pure Al and to achieve maximum formability in the material. ISF experiments for producing an 80 mm diameter axisymmetric dome were carried out on 2 mm thickness commercially pure Al sheets for different tool speeds and feed rates in a CNC milling machine with a 10 mm hemispherical forming tool. The obtained parts were analyzed for springback, amount of thinning and maximum forming depth. The results showed that when the tool speed was increased by keeping the feed rate constant, the forming depth and thinning were also increased. On contrary, when the feed rate was increased by keeping the tool speed constant, the forming depth and thinning were decreased. Springback was found to be higher when the feed rate was increased rather than the tool speed was increased.
Vishnuganth, M A; Remya, Neelancherry; Kumar, Mathava; Selvaraju, N
2017-05-04
Carbofuran (CBF) removal in a continuous-flow photocatalytic reactor with granular activated carbon supported titanium dioxide (GAC-TiO 2 ) catalyst was investigated. The effects of feed flow rate, TiO 2 concentration and addition of supplementary oxidants on CBF removal were investigated. The central composite design (CCD) was used to design the experiments and to estimate the effects of feed flow rate and TiO 2 concentration on CBF removal. The outcome of CCD experiments demonstrated that reactor performance was influenced mainly by feed flow rate compared to TiO 2 concentration. A second-order polynomial model developed based on CCD experiments fitted the experimental data with good correlation (R 2 ∼ 0.964). The addition of 1 mL min -1 hydrogen peroxide has shown complete CBF degradation and 76% chemical oxygen demand removal under the following operating conditions of CBF ∼50 mg L -1 , TiO 2 ∼5 mg L -1 and feed flow rate ∼82.5 mL min -1 . Rate constant of the photodegradation process was also calculated by applying the kinetic data in pseudo-first-order kinetics. Four major degradation intermediates of CBF were identified using GC-MS analysis. As a whole, the reactor system and GAC-TiO 2 catalyst used could be constructive in cost-effective CBF removal with no impact to receiving environment through getaway of photocatalyst.
The use of feed-grade amino acids in lactating sow diets.
Greiner, Laura; Srichana, Pairat; Usry, James L; Neill, Casey; Allee, Gary L; Connor, Joseph; Touchette, Kevin J; Knight, Christopher D
2018-01-01
The use of feed grade amino acids can reduce the cost of lactation feed. With changing genetics, increasing feed costs, and higher number of pigs weaned with heavier wean weights further evaluation of higher inclusion levels of feed-grade amino acid in lactation diets than previously published is warranted. Two experiments (Exp.) were conducted to determine the optimal inclusion level of L -lysine HCl to be included in swine lactation diets while digestible lysine levels remain constant across dietary treatments and allowing feed grade amino acids to be added to the diet to maintain dietary ratios relative to lysine to maximize litter growth rate and sow reproductive performance. Furthermore, the studies were to evaluate minimal amino acid ratios relative to lysine that allows for optimal litter growth rate and sow reproductive performance. Exp. 1: Increasing L -lysine HCl resulted in similar gilt feed intake, litter, and reproductive performance. Average litter gain from birth to weaning was 2.51, 2.49, 2.59, 2.43, and 2.65 kg/d when gilts were fed 0.00, 0.075, 0.150, 0.225, and 0.30% L -lysine HCl, respectively. Exp. 2: The average litter gain from birth to weaning was 2.68, 2.73, 2.67, 2.70, and 2.64 kg/d ( P < 0.70) when sows were fed 0.1, 0.2, 0.3, 0.4, and 0.4% L -lysine HCl plus valine, respectively. No other differences among dietary treatments were observed. Collectively, these studies demonstrate corn-soybean meal based lactation diets formulated with a constant SID lysine content for all parities containing up to 0.40% L -lysine HCl with only supplemental feed grade threonine and a methionine source have no detrimental effect on litter growth rate and subsequent total born.
Flower tracking in hawkmoths: behavior and energetics.
Sprayberry, Jordanna D H; Daniel, Thomas L
2007-01-01
As hovering feeders, hawkmoths cope with flower motions by tracking those motions to maintain contact with the nectary. This study examined the tracking, feeding and energetic performance of Manduca sexta feeding from flowers moving at varied frequencies and in different directions. In general we found that tracking performance decreased as frequency increased; M. sexta tracked flowers moving at 1 Hz best. While feeding rates were highest for stationary flowers, they remained relatively constant for all tested frequencies of flower motion. Calculations of net energy gain showed that energy expenditure to track flowers is minimal compared to energy intake; therefore, patterns of net energy gain mimicked patterns of feeding rate. The direction effects of flower motion were greater than the frequency effects. While M. sexta appeared equally capable of tracking flowers moving in the horizontal and vertical motion axes, they demonstrated poor ability to track flowers moving in the looming axis. Additionally, both feeding rates and net energy gain were lower for looming axis flower motions.
Quality evaluation of millet-soy blended extrudates formulated through linear programming.
Balasubramanian, S; Singh, K K; Patil, R T; Onkar, Kolhe K
2012-08-01
Whole pearl millet, finger millet and decorticated soy bean blended (millet soy) extrudates formulations were designed using a linear programming (LP) model to minimize the total cost of the finished product. LP formulated composite flour was extruded through twin screw food extruder at different feed rate (6.5-13.5 kg/h), screw speed (200-350 rpm, constant feed moisture (14% wb), barrel temperature (120 °C) and cutter speed (15 rpm). The physical, functional, textural and pasting characteristics of extrudates were examined and their responses were studied. Expansion index (2.31) and sectional expansion index (5.39) was found to be was found maximum for feed rate and screw speed combination 9.5 kg/h and 250 rpm. However, density (0.25 × 10(-3) g/mm(3)) was maximum for 9.5 kg/h and 300 rpm combination. Maximum color change (10.32) was found for 9.5 kg/h feed rate and 200 rpm screw speed. The lower hardness was obtained for the samples extruded at lowest feed rate (6.5 kg/h) for all screw speed and feed rate at 9.5 kg/h for 300-350 rpm screw speed. Peak viscosity decreases with all screw speed of 9.5 kg/h feed rate.
NASA Astrophysics Data System (ADS)
Gutiérrez-Montes, Cándido; Bolaños-Jiménez, Rocío; Martínez-Bazán, Carlos; Sevilla, Alejandro
2014-11-01
An experimental and numerical study has been performed to explore the influence of different geometric features and operating conditions on the dynamics of a water-air-water planar co-flow. Specifically, regarding the nozzle used, the inner-to-outer thickness ratio of the air injector, β = Hi/Ho, the water-to-air thickness ratio, h = Hw/Ho, and the shape of the injector tip, have been described. As for the operating conditions, the water exit velocity profile under constant flow rate and constant air feeding pressure has been assessed. The results show that the jetting-bubbling transition is promoted for increasing values of β, decreasing values of h, rounded injector tip, and for uniform water exit velocity profiles. As for the bubble formation frequency, it increases with increasing values of β, decreasing values of h, rounded injector and parabolic-shaped water exit profiles. Furthermore, the bubble formation frequency has been shown to be lower under constant air feeding pressure conditions than at constant gas flow rate conditions. Finally, the effectiveness of a time-variable air feeding stream has been numerically studied, determining the forcing receptivity space in the amplitude-frequency plane. Experimental results corroborate the effectiveness of this control technique. Work supported by Spanish MINECO, Junta de Andalucía, European Funds and UJA under Projects DPI2011-28356-C03-02, DPI2011-28356-C03-03, P11-TEP7495 and UJA2013/08/05.
Measurement of filtration rates by infaunal bivalves in a recirculating flume
Cole, B.E.; Thompson, J.K.; Cloern, J.E.
1992-01-01
A flume system and protocol for measuring the filtration rate of infaunal bivalves is described. Assemblages of multi-sized clams, at natural densities and in normal filter-feeding positions, removed phytoplankton suspended in a unidirectional flow of water. The free-stream velocity and friction velocity of the flow, and bottom roughness height were similar to those in natural estuarine waters. Continuous variations in phytoplankton (Chroomonas salinay) cell density were used to measure the filtration rate of the suspension-feeding clam Potamocorbula amurensis for periods of 2 to 28 h. Filtration rates of P. amurensis varied from 100 to 580 liters (gd)-1 over a free-stream velocity range of 9 to 25 cm s-1. Phytoplankton loss rates were usually constant throughout the experiments. Our results suggest that suspension-feeding by infaunal bivalves is sensitive to flow velocity. ?? 1992 Springer-Verlag.
USDA-ARS?s Scientific Manuscript database
Developmental rates and age-specific life tables were determined for Aulacorthum solani (Kaltenbach) (known as foxglove aphid or glasshouse potato aphid) at 6 constant temperatures feeding on pansy (Viola × wittrockiana) (Gams.). Previously, there were no complete life table studies of this species...
A novel modeling approach to the mixing process in twin-screw extruders
NASA Astrophysics Data System (ADS)
Kennedy, Amedu Osaighe; Penlington, Roger; Busawon, Krishna; Morgan, Andy
2014-05-01
In this paper, a theoretical model for the mixing process in a self-wiping co-rotating twin screw extruder by combination of statistical techniques and mechanistic modelling has been proposed. The approach was to examine the mixing process in the local zones via residence time distribution and the flow dynamics, from which predictive models of the mean residence time and mean time delay were determined. Increase in feed rate at constant screw speed was found to narrow the shape of the residence time distribution curve, reduction in the mean residence time and time delay and increase in the degree of fill. Increase in screw speed at constant feed rate was found to narrow the shape of the residence time distribution curve, decrease in the degree of fill in the extruder and thus an increase in the time delay. Experimental investigation was also done to validate the modeling approach.
DOE Office of Scientific and Technical Information (OSTI.GOV)
KRUGER AA; MATLACK KS; GONG W
2011-12-29
This report documents melter and off-gas performance results obtained on the DM1200 HLW Pilot Melter during processing of AZ-101 HLW simulants. The tests reported herein are a subset of six tests from a larger series of tests described in the Test Plan for the work; results from the other tests have been reported separately. The solids contents of the melter feeds were based on the WTP baseline value for the solids content of the feeds from pretreatment which changed during these tests from 20% to 15% undissolved solids resulting in tests conducted at two feed solids contents. Based on themore » results of earlier tests with single outlet 'J' bubblers, initial tests were performed with a total bubbling rate of 651 pm. The first set of tests (Tests 1A-1E) addressed the effects of skewing this total air flow rate back and forth between the two installed bubblers in comparison to a fixed equal division of flow between them. The second set of tests (2A-2D) addressed the effects of bubbler depth. Subsequently, as the location, type and number of bubbling outlets were varied, the optimum bubbling rate for each was determined. A third (3A-3C) and fourth (8A-8C) set of tests evaluated the effects of alternative bubbler designs with two gas outlets per bubbler instead of one by placing four bubblers in positions simulating multiple-outlet bubblers. Data from the simulated multiple outlet bubblers were used to design bubblers with two outlets for an additional set of tests (9A-9C). Test 9 was also used to determine the effect of small sugar additions to the feed on ruthenium volatility. Another set of tests (10A-10D) evaluated the effects on production rate of spiking the feed with chloride and sulfate. Variables held constant to the extent possible included melt temperature, plenum temperature, cold cap coverage, the waste simulant composition, and the target glass composition. The feed rate was increased to the point that a constant, essentially complete, cold cap was achieved, which was used as an indicator of a maximized feed rate for each test. The first day of each test was used to build the cold cap and decrease the plenum temperature. The remainder of each test was split into two- to six-day segments, each with a different bubbling rate, bubbler orientation, or feed concentration of chloride and sulfur.« less
Anasontzis, George E; Salazar Penã, Margarita; Spadiut, Oliver; Brumer, Harry; Olsson, Lisbeth
2014-01-01
Optimization of protein production from methanol-induced Pichia pastoris cultures is necessary to ensure high productivity rates and high yields of recombinant proteins. We investigated the effects of temperature and different linear or exponential methanol-feeding rates on the production of recombinant Fusarium graminearum galactose oxidase (EC 1.1.3.9) in a P. pastoris Mut+ strain, under regulation of the AOX1 promoter. We found that low exponential methanol feeding led to 1.5-fold higher volumetric productivity compared to high exponential feeding rates. The duration of glycerol feeding did not affect the subsequent product yield, but longer glycerol feeding led to higher initial biomass concentration, which would reduce the oxygen demand and generate less heat during induction. A linear and a low exponential feeding profile led to productivities in the same range, but the latter was characterized by intense fluctuations in the titers of galactose oxidase and total protein. An exponential feeding profile that has been adapted to the apparent biomass concentration results in more stable cultures, but the concentration of recombinant protein is in the same range as when constant methanol feeding is employed. © 2014 The Authors Biotechnology Progress published by Wiley Periodicals, Inc. on behalf of American Institute of Chemical Engineers Biotechnol. Prog., 30:728–735, 2014 PMID:24493559
Cellular automata simulation of topological effects on the dynamics of feed-forward motifs
Apte, Advait A; Cain, John W; Bonchev, Danail G; Fong, Stephen S
2008-01-01
Background Feed-forward motifs are important functional modules in biological and other complex networks. The functionality of feed-forward motifs and other network motifs is largely dictated by the connectivity of the individual network components. While studies on the dynamics of motifs and networks are usually devoted to the temporal or spatial description of processes, this study focuses on the relationship between the specific architecture and the overall rate of the processes of the feed-forward family of motifs, including double and triple feed-forward loops. The search for the most efficient network architecture could be of particular interest for regulatory or signaling pathways in biology, as well as in computational and communication systems. Results Feed-forward motif dynamics were studied using cellular automata and compared with differential equation modeling. The number of cellular automata iterations needed for a 100% conversion of a substrate into a target product was used as an inverse measure of the transformation rate. Several basic topological patterns were identified that order the specific feed-forward constructions according to the rate of dynamics they enable. At the same number of network nodes and constant other parameters, the bi-parallel and tri-parallel motifs provide higher network efficacy than single feed-forward motifs. Additionally, a topological property of isodynamicity was identified for feed-forward motifs where different network architectures resulted in the same overall rate of the target production. Conclusion It was shown for classes of structural motifs with feed-forward architecture that network topology affects the overall rate of a process in a quantitatively predictable manner. These fundamental results can be used as a basis for simulating larger networks as combinations of smaller network modules with implications on studying synthetic gene circuits, small regulatory systems, and eventually dynamic whole-cell models. PMID:18304325
Consequences of genetic change in farm animals on food intake and feeding behaviour.
Emmans, G; Kyriazakis, I
2001-02-01
Selection in commercial populations on aspects of output, such as for growth rate in poultry. against fatness and for growth rate in pigs, and for milk yield in cows, has had very barge effects on such outputs over the past 50 years. Partly because of the cost of recording intake, there has been little or no selection for food intake or feeding behaviour. In order to predict the effects of such past, and future, selection on intake it is necessary to have some suitable theoretical framework. Intake needs to be predicted in order to make rational feeding and environmental decisions. The idea that an animal will eat 'to meet its requirements' has proved useful and continues to be fruitful. An important part of the idea is that the animal (genotype) can be described in a way that is sufficient for the accurate prediction of its outputs over time. Such descriptions can be combined with a set of nutritional constants to calculate requirements. There appears to have been no change in the nutritional constants under selection for output. Under such selection it is simplest to assume that changes in intake follow from the changes in output rates, so that intake changes become entirely predictable. It is suggested that other ways that have been proposed for predicting intake cannot be successful in predicting the effects of selection. Feeding behaviour is seen as being the means that the animal uses to attain its intake rather than being the means by which that intake can be predicted. Thus, the organisation of feeding behaviour can be used to predict neither intake nor the effects of selection on it.
Mineral composition and rates of flow of effluent from the distal ileum of liquid-fed calves
Smith, R. H.
1966-01-01
1. Liquid-fed calves (aged 1½-4 months) examined more than five weeks after inserting a re-entrant fistula into the distal ileum, of normal sodium and potassium status and without abnormal gut infection, showed mean emergence rates from the ileum for sodium, potassium and water of 2·3 m-mole/hr, 0·38 m-mole/hr and 21 g/hr respectively after 16 hr fasting. 2. Sodium and potassium emergence rates changed little when the residues from a milk or glucose-solution feed arrived at the distal ileum. When magnesium chloride was added to a glucose-solution feed an increase sometimes occurred but only in association with decreased small-intestine transit time. 3. Widely differing sodium and potassium intakes had no appreciable direct effect on their emergence rates. Continued feeding of a diet deficient in either ion, however, altered the calf's metabolism and led to appropriate changes in the sodium/potassium ratio of ileal effluent. These changes were not simulated by injecting adrenal cortex hormones. The ratio also decreased when ileal effluent was allowed to discharge for several weeks without being returned to the colon. It was abnormally high in samples obtained less than five weeks after inserting cannulae. 4. An increase in sodium and potassium emergence rates, which often occurred spontaneously at about 3 months of age, appeared to be due to infection and was usually prevented by giving aureomycin orally. 5. Water emergence rate reflected changes in the emergence rates of osmotically effective constituents and isotonicity was maintained. In effluent after fasting, the cations involved were mainly sodium and potassium, and [Na] + [K] was approximately constant (mean 132 m-mole/l.). In effluent following feeds of milk or glucose, magnesium chloride solution, [Na] + [K] was depressed and [Na] + [K] + 1·5 [Mg] was approximately constant (mean 139 m-mole/l.). Magnesium behaved as it were mainly ionic. Calcium had no apparent osmotic effect and was probably insoluble. 6. Bicarbonate was the major anion in ileal effluent after a milk feed with smaller amounts of chloride, phosphate and some other unknown anion(s). PMID:5919555
Dowd, Jason E; Jubb, Anthea; Kwok, K Ezra; Piret, James M
2003-05-01
Consistent perfusion culture production requires reliable cell retention and control of feed rates. An on-line cell probe based on capacitance was used to assay viable biomass concentrations. A constant cell specific perfusion rate controlled medium feed rates with a bioreactor cell concentration of approximately 5 x 10(6) cells mL(-1). Perfusion feeding was automatically adjusted based on the cell concentration signal from the on-line biomass sensor. Cell specific perfusion rates were varied over a range of 0.05 to 0.4 nL cell(-1) day(-1). Pseudo-steady-state bioreactor indices (concentrations, cellular rates and yields) were correlated to cell specific perfusion rates investigated to maximize recombinant protein production from a Chinese hamster ovary cell line. The tissue-type plasminogen activator concentration was maximized ( approximately 40 mg L(-1)) at 0.2 nL cell(-1) day(-1). The volumetric protein productivity ( approximately 60 mg L(-1) day(-1) was maximized above 0.3 nL cell(-1) day(-1). The use of cell specific perfusion rates provided a straightforward basis for controlling, modeling and optimizing perfusion cultures.
Cain, Daniel J.; Croteau, Marie-Noele; Fuller, Christopher C.; Ringwood, Amy H.
2016-01-01
Whereas feeding inhibition caused by exposure to contaminants has been extensively documented, the underlying mechanism(s) are less well understood. For this study, the behavior of several key feeding processes, including ingestion rate and assimilation efficiency, that affect the dietary uptake of Cu were evaluated in the benthic grazer Lymnaea stagnalis following 4–5 h exposures to Cu adsorbed to synthetic hydrous ferric oxide (Cu–HFO). The particles were mixed with a cultured alga to create algal mats with Cu exposures spanning nearly 3 orders of magnitude at variable or constant Fe concentrations, thereby allowing first order and interactive effects of Cu and Fe to be evaluated. Results showed that Cu influx rates and ingestion rates decreased as Cu exposures of the algal mat mixture exceeded 104 nmol/g. Ingestion rate appeared to exert primary control on the Cu influx rate. Lysosomal destabilization rates increased directly with Cu influx rates. At the highest Cu exposure where the incidence of lysosomal membrane damage was greatest (51%), the ingestion rate was suppressed 80%. The findings suggested that feeding inhibition was a stress response emanating from excessive uptake of dietary Cu and cellular toxicity.
NASA Astrophysics Data System (ADS)
Azmi, A. I.; Syahmi, A. Z.; Naquib, M.; Lih, T. C.; Mansor, A. F.; Khalil, A. N. M.
2017-10-01
This article presents an approach to evaluate the effects of different machining conditions on the specific cutting energy of carbon fibre reinforced polymer composites (CFRP). Although research works in the machinability of CFRP composites have been very substantial, the present literature rarely discussed the topic of energy consumption and the specific cutting energy. A series of turning experiments were carried out on two different CFRP composites in order to determine the power and specific energy constants and eventually evaluate their effects due to the changes in machining conditions. A good agreement between the power and material removal rate using a simple linear relationship. Further analyses revealed that a power law function is best to describe the effect of feed rate on the changes in the specific cutting energy. At lower feed rate, the specific cutting energy increases exponentially due to the nature of finishing operation, whereas at higher feed rate, the changes in specific cutting energy is minimal due to the nature of roughing operation.
A rational approach to improving productivity in recombinant Pichia pastoris fermentation.
d'Anjou, M C; Daugulis, A J
2001-01-05
A Mut(S) Pichia pastoris strain that had been genetically modified to produce and secrete sea raven antifreeze protein was used as a model system to demonstrate the implementation of a rational, model-based approach to improve process productivity. A set of glycerol/methanol mixed-feed continuous stirred-tank reactor (CSTR) experiments was performed at the 5-L scale to characterize the relationship between the specific growth rate and the cell yield on methanol, the specific methanol consumption rate, the specific recombinant protein formation rate, and the productivity based on secreted protein levels. The range of dilution rates studied was 0. 01 to 0.10 h(-1), and the residual methanol concentration was kept constant at approximately 2 g/L (below the inhibitory level). With the assumption that the cell yield on glycerol was constant, the cell yield on methanol increased from approximately 0.5 to 1.5 over the range studied. A maximum specific methanol consumption rate of 20 mg/g. h was achieved at a dilution rate of 0.06 h(-1). The specific product formation rate and the volumetric productivity based on product continued to increase over the range of dilution rates studied, and the maximum values were 0.06 mg/g. h and 1.7 mg/L. h, respectively. Therefore, no evidence of repression by glycerol was observed over this range, and operating at the highest dilution rate studied maximized productivity. Fed-batch mass balance equations, based on Monod-type kinetics and parameters derived from data collected during the CSTR work, were then used to predict cell growth and recombinant protein production and to develop an exponential feeding strategy using two carbon sources. Two exponential fed-batch fermentations were conducted according to the predicted feeding strategy at specific growth rates of 0.03 h(-1) and 0.07 h(-1) to verify the accuracy of the model. Cell growth was accurately predicted in both fed-batch runs; however, the model underestimated recombinant product concentration. The overall volumetric productivity of both runs was approximately 2.2 mg/L. h, representing a tenfold increase in the productivity compared with a heuristic feeding strategy. Copyright 2001 John Wiley & Sons, Inc.
Process for hydrocracking carbonaceous material to provide fuels or chemical feed stock
Duncan, Dennis A.
1980-01-01
A process is disclosed for hydrocracking coal or other carbonaceous material to produce various aromatic hydrocarbons including benzene, toluene, xylene, ethylbenzene, phenol and cresols in variable relative concentrations while maintaining a near constant maximum temperature. Variations in relative aromatic concentrations are achieved by changing the kinetic severity of the hydrocracking reaction by altering the temperature profile up to and quenching from the final hydrocracking temperature. The relative concentration of benzene to the alkyl and hydroxyl aromatics is increased by imposing increased kinetic severity above that corresponding to constant heating rate followed by immediate quenching at about the same rate to below the temperature at which dehydroxylation and dealkylation reactions appreciably occur. Similarly phenols, cresols and xylenes are produced in enhanced concentrations by adjusting the temperature profile to provide a reduced kinetic severity relative to that employed when high benzene concentrations are desired. These variations in concentrations can be used to produce desired materials for chemical feed stocks or for fuels.
Kargi, Fikret; Cikla, Sinem
2007-12-01
Biosorption of zinc (II) ions onto pre-treated powdered waste sludge (PWS) was investigated using a completely mixed tank operating in fed-batch mode instead of an adsorption column. Experiments with variable feed flow rate (0.05-0.5 L h(-1)), feed Zn(II) ion concentrations (37.5-275 mg L(-1)) and amount of adsorbent (1-6 g PWS) were performed using fed-batch operation at pH 5 and room temperature (20-25 degrees C). Break-through curves describing variations of aqueous (effluent) zinc ion concentrations with time were determined for different operating conditions. Percent zinc removal from the aqueous phase decreased, but the biosorbed (solid phase) zinc ion concentration increased with increasing feed flow rate and zinc concentration. A modified Bohart-Adams equation was used to determine the biosorption capacity of PWS (q'(s)) and the rate constant (K) for zinc ion biosorption. Biosorption capacity (q'(s)=57.7 g Zn kg(-1) PWS) of PWS in fed-batch operation was found to be comparable with powdered activated carbon (PAC) in column operations. However, the adsorption rate constant (K=9.17 m(3) kg(-1) h(-1)) in fed-batch operation was an order of magnitude larger than those obtained in adsorption columns because of elimination of mass transfer limitations encountered in the column operations. Therefore, a completely mixed tank operated in fed-batch mode was proven to be more advantageous as compared to adsorption columns due to better contact between the phases yielding faster adsorption rates.
Li, J; French, B A; Nan, L; Fu, P; French, S W
2005-06-01
The mechanism of the UAL cycle in the intragastric feeding model of alcoholic liver disease in the rat was investigated by administering dinitrophenol (DNP) with ethanol in the diet. The question was: is the rate of oxidative phosphorylation fluxuation essential for the cycle to occur? The question has been partially answered by showing that rotenone, which inhibits complex I, blocks the cycle by preventing the generation of NAD from NADH. This would inhibit ATP generation from complex I but would not affect oxidative phosphorylation by complex 2 and 3. Since the rate of O2 consumption is normal at the troughs of the cycle and decreases at the peaks of the cycle and the levels of ATP are reduced at the peaks of the cycle, it is likely that the rate of oxidative phosphorylation also cycles. Since 2-4 dinitrophenol (DNP) uncouples oxidative phosphorylation, it was anticipated that feeding it with ethanol would prevent the cycle from occurring. This proved to be the case. In addition, DNP caused energy wasting and prevented the increase in serum alanine aminotranspeptidase caused by ethanol feeding, probably by preventing the hypoxia which occurs at the peaks of the cycle.
Lu, Fei; Li, Chao; Wang, Zejian; Zhao, Wei; Chu, Ju; Zhuang, Yingping; Zhang, Siliang
2016-11-01
In this paper, a system of cell-recycle continuous fermentation for sodium gluconate (SG) production by Aspergillus niger (A. niger) was established. Based on initial continuous fermentation result (100.0h) with constant feed rate, an automatic feedback strategy to regulate feed rate using on-line physiological parameters (OUR and DO) was proposed and applied successfully for the first time in the improved continuous fermentation (240.5h). Due to less auxiliary time, highest SG production rate (31.05±0.29gL(-1)h(-1)) and highest yield (0.984±0.067molmol(-1)), overall SG production capacity (975.8±5.8gh(-1)) in 50-L fermentor of improved continuous fermentation increased more than 300.0% compared to that of batch fermentation. Improvement of mass transfer and dispersed mycelia morphology were the two major reasons responsible for the high SG production rate. This system had been successfully applied to industrial fermentation and SG production was greatly improved. Copyright © 2016 Elsevier Ltd. All rights reserved.
Breakthrough Adsorption Study of Crude Oil Removal Using Buffing Dust
NASA Astrophysics Data System (ADS)
Setyaningsih, L. W. N.; Yuliansyah, A. T.; Prasetyo, A.; Arimanintan, S. K.; Putri, D. R.
2018-05-01
The utilization of leather industry solid waste as adsorbent to separate oil from water emulsions of surfactant flooding process is a solution that is relatively inexpensive. This study was conducted aiming to obtain a mathematical model that is appropriate for the adsorption process of crude oil by buffing dust in emulsion phase with a continuous adsorption method. Variations in the column adsorption experiments were carried out, such as: flow rate of feed of water-crude oil-surfactant, the concentration of crude oil in the feed, and mass of adsorbent used. Data were evaluated using three models: Adams Bohart, Thomas and Yan. Best results are obtained on the following conditions, the feed flow rate of 60 mL/minute, the crude oil concentration in feed is 1.5% volume and the mass of adsorbent used was 10 g. The values of kinetic constant and adsorption capacity obtained from Yan Model was 21.7774 mL/mg/minute and 220.9581 mg/g with the relative error obtained is 5.4424%.
Assessing the effect of different treatments on decomposition rate of dairy manure.
Khalil, Tariq M; Higgins, Stewart S; Ndegwa, Pius M; Frear, Craig S; Stöckle, Claudio O
2016-11-01
Confined animal feeding operations (CAFOs) contribute to greenhouse gas emission, but the magnitude of these emissions as a function of operation size, infrastructure, and manure management are difficult to assess. Modeling is a viable option to estimate gaseous emission and nutrient flows from CAFOs. These models use a decomposition rate constant for carbon mineralization. However, this constant is usually determined assuming a homogenous mix of manure, ignoring the effects of emerging manure treatments. The aim of this study was to measure and compare the decomposition rate constants of dairy manure in single and three-pool decomposition models, and to develop an empirical model based on chemical composition of manure for prediction of a decomposition rate constant. Decomposition rate constants of manure before and after an anaerobic digester (AD), following coarse fiber separation, and fine solids removal were determined under anaerobic conditions for single and three-pool decomposition models. The decomposition rates of treated manure effluents differed significantly from untreated manure for both single and three-pool decomposition models. In the single-pool decomposition model, AD effluent containing only suspended solids had a relatively high decomposition rate of 0.060 d(-1), while liquid with coarse fiber and fine solids removed had the lowest rate of 0.013 d(-1). In the three-pool decomposition model, fast and slow decomposition rate constants (0.25 d(-1) and 0.016 d(-1) respectively) of untreated AD influent were also significantly different from treated manure fractions. A regression model to predict the decomposition rate of treated dairy manure fitted well (R(2) = 0.83) to observed data. Copyright © 2016 Elsevier Ltd. All rights reserved.
Nyman, Anna-Maija; Hintermeister, Anita; Schirmer, Kristin; Ashauer, Roman
2013-01-01
If an organism does not feed, it dies of starvation. Even though some insecticides which are used to control pests in agriculture can interfere with feeding behavior of insects and other invertebrates, the link from chemical exposure via affected feeding activity to impaired life history traits, such as survival, has not received much attention in ecotoxicology. One of these insecticides is the neonicotinoid imidacloprid, a neurotoxic substance acting specifically on the insect nervous system. We show that imidacloprid has the potential to indirectly cause lethality in aquatic invertebrate populations at low, sublethal concentrations by impairing movements and thus feeding. We investigated feeding activity, lipid content, immobility, and survival of the aquatic arthropod Gammarus pulex under exposure to imidacloprid. We performed experiments with 14 and 21 days duration, both including two treatments with two high, one day pulses of imidacloprid and one treatment with a low, constant concentration. Feeding of G. pulex as well as lipid content were significantly reduced under exposure to the low, constant imidacloprid concentration (15 µg/L). Organisms were not able to move and feed – and this caused high mortality after 14 days of constant exposure. In contrast, feeding and lipid content were not affected by repeated imidacloprid pulses. In these treatments, animals were mostly immobilized during the chemical pulses but did recover relatively fast after transfer to clean water. We also performed a starvation experiment without exposure to imidacloprid which showed that starvation alone does not explain the mortality in the constant imidacloprid exposure. Using a multiple stressor toxicokinetic-toxicodynamic modeling approach, we showed that both starvation and other toxic effects of imidacloprid play a role for determining mortality in constant exposure to the insecticide. PMID:23690941
QSPR prediction of the hydroxyl radical rate constant of water contaminants.
Borhani, Tohid Nejad Ghaffar; Saniedanesh, Mohammadhossein; Bagheri, Mehdi; Lim, Jeng Shiun
2016-07-01
In advanced oxidation processes (AOPs), the aqueous hydroxyl radical (HO) acts as a strong oxidant to react with organic contaminants. The hydroxyl radical rate constant (kHO) is important for evaluating and modelling of the AOPs. In this study, quantitative structure-property relationship (QSPR) method is applied to model the hydroxyl radical rate constant for a diverse dataset of 457 water contaminants from 27 various chemical classes. The constricted binary particle swarm optimization and multiple-linear regression (BPSO-MLR) are used to obtain the best model with eight theoretical descriptors. An optimized feed forward neural network (FFNN) is developed to investigate the complex performance of the selected molecular parameters with kHO. Although the FFNN prediction results are more accurate than those obtained using BPSO-MLR, the application of the latter is much more convenient. Various internal and external validation techniques indicate that the obtained models could predict the logarithmic hydroxyl radical rate constants of a large number of water contaminants with less than 4% absolute relative error. Finally, the above-mentioned proposed models are compared to those reported earlier and the structural factors contributing to the AOP degradation efficiency are discussed. Copyright © 2016 Elsevier Ltd. All rights reserved.
Pamukoglu, M Yunus; Kargi, Fikret
2007-09-05
Copper(II) ion toxicity onto activated sludge organisms was eliminated by addition of powdered waste sludge (PWS) to the feed wastewater for removal of Cu(II) ions by biosorption before biological treatment. The synthetic feed wastewater containing 14 or 22 mgl(-1) Cu(II) was mixed with PWS in a mixing tank where Cu(II) ions were adsorbed onto PWS and the mixture was fed to a sedimentation tank to separate Cu(II) containing PWS from the feed wastewater. The activated sludge unit fed with the effluent of the sedimentation tank was operated at a hydraulic residence time (HRT) of 10h and sludge age (SRT) of 10 days. To investigate Cu(II), COD and toxicity removal performance of the activated sludge unit at different PWS loadings, the system was operated at different PWS loading rates (0.1-1 gPWSh(-1)) while the Cu(II) loading rate was constant throughout the operation. Percent copper, COD and toxicity removals increased with increasing PWS loading rate due to increased adsorption of Cu(II) onto PWS yielding low Cu(II) contents in the feed. Biomass concentration in the aeration tank increased and the sludge volume index (SVI) decreased with increasing PWS loading rate due to elimination of Cu(II) from the feed wastewater by PWS addition. PWS addition to the Cu(II) containing wastewater was proven to be effective for removal of Cu(II) by biosorption before biological treatment. Approximately, 1 gPWSh(-1) should be added for 28 mgCuh(-1) loading rate for complete removal of Cu(II) from the feed wastewater to obtain high COD removals in the activated sludge unit.
Linke, Bernd; Rodríguez-Abalde, Ángela; Jost, Carsten; Krieg, Andreas
2015-02-01
This study investigated the potential of producing biogas on demand from maize silage using a novel two-phase continuously fed leach bed reactor (LBR) which is connected to an anaerobic filter (AF). Six different feeding patterns, each for 1week, were studied at a weekly average of a volatile solids (VS) loading rate of 4.5 g L(-1) d(-1) and a temperature of 38°C. Methane production from the LBR and AF responded directly proportional to the VS load from the different daily feeding and resulted in an increase up to 50-60% per day, compared to constant feeding each day. The feeding patterns had no impact on VS methane yield which corresponded on average to 330 L kg(-1). In spite of some daily shock loadings, carried out during the different feeding patterns study, the reactor performance was not affected. A robust and reliable biogas production from stalky biomass was demonstrated. Copyright © 2014 Elsevier Ltd. All rights reserved.
Development of a 20 mA negative hydrogen ion source for cyclotrons
NASA Astrophysics Data System (ADS)
Etoh, H.; Onai, M.; Arakawa, Y.; Aoki, Y.; Mitsubori, H.; Sakuraba, J.; Kato, T.; Mitsumoto, T.; Yajima, S.; Hatayama, A.; Okumura, Y.
2017-08-01
A cesiated DC negative ion source has been developed for proton cyclotrons in medical applications. A continuous H- beam of 23 mA was stably extracted at an arc power of 3 kW. The beam current gradually decreases with a constant arc power and without additional Cs injection and the decay rate was about 0.03 mA (0.14%) per hour. A feed-back control system that automatically adjusts the arc power to stabilize the beam current is able to keep the beam current constant at ±0.04 mA (±0.2%).
Predicting dietborne metal toxicity from metal influxes
Croteau, M.-N.; Luoma, S.N.
2009-01-01
Dietborne metal uptake prevails for many species in nature. However, the links between dietary metal exposure and toxicity are not well understood. Sources of uncertainty include the lack of suitable tracers to quantify exposure for metals such as copper, the difficulty to assess dietary processes such as food ingestion rate, and the complexity to link metal bioaccumulation and effects. We characterized dietborne copper, nickel, and cadmium influxes in a freshwater gastropod exposed to diatoms labeled with enriched stable metal isotopes. Metal influxes in Lymnaea stagnalis correlated linearly with dietborne metal concentrations over a range encompassing most environmental exposures. Dietary Cd and Ni uptake rate constants (kuf) were, respectively, 3.3 and 2.3 times higher than that for Cu. Detoxification rate constants (k detox) were similar among metals and appeared 100 times higher than efflux rate constants (ke). Extremely high Cu concentrations reduced feeding rates, causing the relationship between exposure and influx to deviate from linearity; i.e., Cu uptake rates leveled off between 1500 and 1800 nmol g-1 day-1. L. stagnalis rapidly takes up Cu, Cd, and Ni from food but detoxifies the accumulated metals, instead of reducing uptake or intensifying excretion. Above a threshold uptake rate, however, the detoxification capabilities of L. stagnalis are overwhelmed.
Kostanyan, Artak E; Shishilov, Oleg N
2018-06-01
Multiple dual mode counter-current chromatography (MDM CCC) separation processes with semi-continuous large sample loading consist of a succession of two counter-current steps: with "x" phase (first step) and "y" phase (second step) flow periods. A feed mixture dissolved in the "x" phase is continuously loaded into a CCC machine at the beginning of the first step of each cycle over a constant time with the volumetric rate equal to the flow rate of the pure "x" phase. An easy-to-use calculating machine is developed to simulate the chromatograms and the amounts of solutes eluted with the phases at each cycle for steady-state (the duration of the flow periods of the phases is kept constant for all the cycles) and non-steady-state (with variable duration of alternating phase elution steps) separations. Using the calculating machine, the separation of mixtures containing up to five components can be simulated and designed. Examples of the application of the calculating machine for the simulation of MDM CCC processes are discussed. Copyright © 2018 Elsevier B.V. All rights reserved.
Liver but not adipose tissue is responsive to the pattern of enteral feeding
Otero, Yolanda F.; Lundblad, Tammy M.; Ford, Eric A.; House, Lawrence M.; McGuinness, Owen P.
2014-01-01
Abstract Nutritional support is an important aspect of medical care, providing calories to patients with compromised nutrient intake. Metabolism has a diurnal pattern, responding to the light cycle and food intake, which in turn can drive changes in liver and adipose tissue metabolism. In this study, we assessed the response of liver and white adipose tissue (WAT) to different feeding patterns under nutritional support (total enteral nutrition or TEN). Mice received continuous isocaloric TEN for 10 days or equal calories of chow once a day (Ch). TEN was given either at a constant (CN, same infusion rate during 24 h) or variable rate (VN, 80% of calories fed at night, 20% at day). Hepatic lipogenesis and carbohydrate‐responsive element‐binding protein (ChREBP) expression increased in parallel with the diurnal feeding pattern. Relative to Ch, both patterns of enteral feeding increased adiposity. This increase was not associated with enhanced lipogenic gene expression in WAT; moreover, lipogenesis was unaffected by the feeding pattern. Surprisingly, leptin and adiponectin expression increased. Moreover, nutritional support markedly increased hepatic and adipose FGF21 expression in CN and VN, despite being considered a fasting hormone. In summary, liver but not WAT, respond to the pattern of feeding. While hepatic lipid metabolism adapts to the pattern of nutrient availability, WAT does not. Moreover, sustained delivery of nutrients in an isocaloric diet can cause adiposity without the proinflammatory state observed in hypercaloric feeding. Thus, the liver but not adipose tissue is responsive to the pattern of feeding behavior. PMID:24744913
Shao, Xiongjun; Lynd, Lee; Wyman, Charles; Bakker, André
2009-01-01
The model of South et al. [South et al. (1995) Enzyme Microb Technol 17(9): 797-803] for simultaneous saccharification of fermentation of cellulosic biomass is extended and modified to accommodate intermittent feeding of substrate and enzyme, cascade reactor configurations, and to be more computationally efficient. A dynamic enzyme adsorption model is found to be much more computationally efficient than the equilibrium model used previously, thus increasing the feasibility of incorporating the kinetic model in a computational fluid dynamic framework in the future. For continuous or discretely fed reactors, it is necessary to use particle conversion in conversion-dependent hydrolysis rate laws rather than reactor conversion. Whereas reactor conversion decreases due to both reaction and exit of particles from the reactor, particle conversion decreases due to reaction only. Using the modified models, it is predicted that cellulose conversion increases with decreasing feeding frequency (feedings per residence time, f). A computationally efficient strategy for modeling cascade reactors involving a modified rate constant is shown to give equivalent results relative to an exhaustive approach considering the distribution of particles in each successive fermenter.
Yin, L; Song, X F; Qu, S F; Huang, T; Mei, J P; Yang, Z Y; Li, J
2006-11-01
This paper reports on the performance evaluation of a dental handpiece in simulation of clinical finishing using a novel two-degrees-of-freedom (2DOF) in vitro apparatus. The instrumented apparatus consisted of a two-dimensional computer-controlled coordinate worktable carrying a dental handpiece, a piezoelectric force dynamometer, and a high-speed data acquisition and signal conditioning system for simulating the clinical operations and monitoring the dental finishing processes. The performance of the dental handpiece was experimentally evaluated with respect to rotational speed, torque, and specific finishing energy under the applied clinical finishing conditions. The results show that the rotational speeds of the dental handpiece decreased by increasing either the depth of cut or the feed rate at a constant clinically applied air pressure and water flowrate. They also decreased when increasing both the tangential and normal finishing forces. The specific finishing energy decreased with an increase in either depth of cut or feed rate, while the finishing torque increased as either the depth of cut or the feed rate was increased. Implications of these results were to provide guidance for proper applications of dental handpieces in clinical practice.
Development of a Compact Eleven Feed Cryostat for the Patriot 12-m Antenna System
NASA Technical Reports Server (NTRS)
Beaudoin, Christopher; Kildal, Per-Simon; Yang, Jian; Pantaleev, Miroslav
2010-01-01
The Eleven antenna has constant beam width, constant phase center location, and low spillover over a decade bandwidth. Therefore, it can feed a reflector for high aperture efficiency (also called feed efficiency). It is equally important that the feed efficiency and its subefficiencies not be degraded significantly by installing the feed in a cryostat. The MIT Haystack Observatory, with guidance from Onsala Space Observatory and Chalmers University, has been working to integrate the Eleven antenna into a compact cryostat suitable for the Patriot 12-m antenna. Since the analysis of the feed efficiencies in this presentation is purely computational, we first demonstrate the validity of the computed results by comparing them to measurements. Subsequently, we analyze the dependence of the cryostat size on the feed efficiencies, and, lastly, the Patriot 12-m subreflector is incorporated into the computational model to assess the overall broadband efficiency of the antenna system.
Grinding efficiency of abutment tooth with both dentin and core composite resin on axial plane.
Miho, Otoaki; Sato, Toru; Matsukubo, Takashi
2015-01-01
The purpose of this study was to evaluate grinding efficiency in abutment teeth comprising both dentin and core composite resin in the axial plane. Grinding was performed over 5 runs at two loads (0.5 or 0.25 N) and two feed rates (1 or 2 mm/sec). The grinding surface was observed with a 3-D laser microscope. Tomographic images of the grinding surfaces captured perpendicular to the feed direction were also analyzed. Using a non-ground surface as a reference, areas comprising only dentin, both dentin and core composite resin, or only core composite resin were analyzed to determine the angle of the grinding surface. Composite resins were subjected to the Vickers hardness test and scanning electron microscopy. Data were statistically analyzed using a one-way analysis of variance and multiple comparison tests. Multiple regression analysis was performed for load, feed rate, and Vickers hardness of the build-up material depending on number of runs. When grinding was performed at a constant load and feed rate, a greater grinding angle was observed in areas comprising both dentin and composite resin or only composite resin than in areas consisting of dentin alone. A correlation was found between machinability and load or feed rate in areas comprising both dentin and composite resin or composite resin alone, with a particularly high correlation being observed between machinability and load. These results suggest that great caution should be exercised in a clinical setting when the boundary between the dentin and composite resin is to be ground, as the angle of the grinding surface changes when the rotating diamond point begins grinding the composite resin.
Growing Crystaline Sapphire Fibers By Laser Heated Pedestal Techiques
Phomsakha, Vongvilay; Chang, Robert S. F.; Djeu, Nicholas I.
1997-03-04
An improved system and process for growing crystal fibers comprising a means for creating a laser beam having a substantially constant intensity profile through its cross sectional area, means for directing the laser beam at a portion of solid feed material located within a fiber growth chamber to form molten feed material, means to support a seed fiber above the molten feed material, means to translate the seed fiber towards and away from the molten feed material so that the seed fiber can make contact with the molten feed material, fuse to the molten feed material and then be withdrawn away from the molten feed material whereby the molten feed material is drawn off in the form of a crystal fiber. The means for creating a laser beam having a substantially constant intensity profile through its cross sectional area includes transforming a previously generated laser beam having a conventional gaussian intensity profile through its cross sectional area into a laser beam having a substantially constant intensity profile through its cross sectional area by passing the previously generated laser beam through a graded reflectivity mirror. The means for directing the laser beam at a portion of solid feed material is configured to direct the laser beam at a target zone which contains the molten feed material and a portion of crystal fiber drawn off the molten feed material by the seed fiber. The means to support the seed fiber above the molten feed material is positioned at a predetermined height above the molten feed material. This predetermined height provides the seed fiber with sufficient length and sufficient resiliency so that surface tension in the molten feed material can move the seed fiber to the center of the molten feed material irrespective of where the seed fiber makes contact with the molten feed material. The internal atmosphere of the fiber growth chamber is composed substantially of Helium gas.
Investigation of operating parameters on CO2 splitting by dielectric barrier discharge plasma
NASA Astrophysics Data System (ADS)
Pan, CHEN; Jun, SHEN; Tangchun, RAN; Tao, YANG; Yongxiang, YIN
2017-12-01
Experiments of CO2 splitting by dielectric barrier discharge (DBD) plasma were carried out, and the influence of CO2 flow rate, plasma power, discharge voltage, discharge frequency on CO2 conversion and process energy efficiency were investigated. It was shown that the absolute quantity of CO2 decomposed was only proportional to the amount of conductive electrons across the discharge gap, and the electron amount was proportional to the discharge power; the energy efficiency of CO2 conversion was almost a constant at a lower level, which was limited by CO2 inherent discharge character that determined a constant gap electric field strength. This was the main reason why CO2 conversion rate decreased as the CO2 flow rate increase and process energy efficiency was decreased a little as applied frequency increased. Therefore, one can improve the CO2 conversion by less feed flow rate or larger discharge power in DBD plasma, but the energy efficiency is difficult to improve.
Design of a novel automated methanol feed system for pilot-scale fermentation of Pichia pastoris.
Hamaker, Kent H; Johnson, Daniel C; Bellucci, Joseph J; Apgar, Kristie R; Soslow, Sherry; Gercke, John C; Menzo, Darrin J; Ton, Christopher
2011-01-01
Large-scale fermentation of Pichia pastoris requires a large volume of methanol feed during the induction phase. However, a large volume of methanol feed is difficult to use in the processing suite because of the inconvenience of constant monitoring, manual manipulation steps, and fire and explosion hazards. To optimize and improve safety of the methanol feed process, a novel automated methanol feed system has been designed and implemented for industrial fermentation of P. pastoris. Details of the design of the methanol feed system are described. The main goals of the design were to automate the methanol feed process and to minimize the hazardous risks associated with storing and handling large quantities of methanol in the processing area. The methanol feed system is composed of two main components: a bulk feed (BF) system and up to three portable process feed (PF) systems. The BF system automatically delivers methanol from a central location to the portable PF system. The PF system provides precise flow control of linear, step, or exponential feed of methanol to the fermenter. Pilot-scale fermentations with linear and exponential methanol feeds were conducted using two Mut(+) (methanol utilization plus) strains, one expressing a recombinant therapeutic protein and the other a monoclonal antibody. Results show that the methanol feed system is accurate, safe, and efficient. The feed rates for both linear and exponential feed methods were within ± 5% of the set points, and the total amount of methanol fed was within 1% of the targeted volume. Copyright © 2011 American Institute of Chemical Engineers (AIChE).
M. H. Meeuwig; J. B. Dunham; J. P. Hayes; G. L. Vinyard
2004-01-01
The effects of constant (12, 18, and 24°C) and cyclical (daily variation of 15â21 and 12â24 °C) thermal regimes on the growth and feeding of Lahontan cutthroat trout (Oncorhynchus clarki henshawi) of variable sizes were examined. Higher constant temperatures (i.e., 24°C) and more variable daily temperatures (i.e., 12â24°C daily cycle) negatively...
USDA-ARS?s Scientific Manuscript database
The effects of fluctuating or constant thermal regimens on growth, mortality, and feed conversion were determined for juvenile yellow perch (Perca flavescens). Yellow perch averaging 156mm total length and 43g body weight were held in replicate 288L circular tanks for 129 days under: 1) a diel therm...
Generative complexity of Gray-Scott model
NASA Astrophysics Data System (ADS)
Adamatzky, Andrew
2018-03-01
In the Gray-Scott reaction-diffusion system one reactant is constantly fed in the system, another reactant is reproduced by consuming the supplied reactant and also converted to an inert product. The rate of feeding one reactant in the system and the rate of removing another reactant from the system determine configurations of concentration profiles: stripes, spots, waves. We calculate the generative complexity-a morphological complexity of concentration profiles grown from a point-wise perturbation of the medium-of the Gray-Scott system for a range of the feeding and removal rates. The morphological complexity is evaluated using Shannon entropy, Simpson diversity, approximation of Lempel-Ziv complexity, and expressivity (Shannon entropy divided by space-filling). We analyse behaviour of the systems with highest values of the generative morphological complexity and show that the Gray-Scott systems expressing highest levels of the complexity are composed of the wave-fragments (similar to wave-fragments in sub-excitable media) and travelling localisations (similar to quasi-dissipative solitons and gliders in Conway's Game of Life).
Electrosprayed Cerium Oxide Nanoparticles
NASA Astrophysics Data System (ADS)
Azar, Pedram Bagherzadeh; Tavanai, Hossein; Allafchian, Ali Reza
2018-04-01
Cerium oxide nanoparticles were fabricated via the calcination of electrosprayed polyvinyl alcohol (PVA)/cerium nitrate nanoparticles. The effect of material variables of PVA/cerium nitrate electrospraying solution, i.e. viscosity, surface tension and electrical conductivity, as well as important process variables like voltage, nozzle-collector distance and feed rate on cerium oxide nanoparticle size, are investigated. Scanning electron microscopy and Fourier-transform infrared (FTIR) spectroscopy analysis have also been carried out. The results showed that electrospraying of PVA/cerium nitrate (25% w/v) was only possible with PVA concentrations in the range of 5-8% w/v. With other conditions constant, decreasing PVA concentration, decreasing feed rate, increasing nozzle-collector distance and increasing voltage decreased the size of the final cerium oxide nanoparticles. The gross average size of all cerium oxide nanoparticles obtained in this work was about 80 nm. FTIR analysis proved the formation of cerium oxide after the calcination process.
Transport equations in an enzymatic glucose fuel cell
NASA Astrophysics Data System (ADS)
Jariwala, Soham; Krishnamurthy, Balaji
2018-01-01
A mathematical model is developed to study the effects of convective flux and operating temperature on the performance of an enzymatic glucose fuel cell with a membrane. The model assumes isothermal operating conditions and constant feed rate of glucose. The glucose fuel cell domain is divided into five sections, with governing equations describing transport characteristics in each region, namely - anode diffusion layer, anode catalyst layer (enzyme layer), membrane, cathode catalyst layer and cathode diffusion layer. The mass transport is assumed to be one-dimensional and the governing equations are solved numerically. The effects flow rate of glucose feed on the performance of the fuel cell are studied as it contributes significantly to the convective flux. The effects of operating temperature on the performance of a glucose fuel cell are also modeled. The cell performances are compared using cell polarization curves, which were found compliant with experimental observations.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Siewicki, T.C.; Chandler, G.T.
1995-12-31
Eastern oysters (Crassostrea virginica) were continuously exposed to suspended {sup 14}C-fluoranthene spiked-sediment for either: (1) five days followed by 24 days deputation, or (2) 28 days exposure. Sediment less than 63 um contained fluoranthene concentrations one or ten times that measured at suburbanized sites in southeastern estuaries (133 or 1,300 ng/g). The data were evaluated both raw and normalized for tissue lipid and sediment organic carbon concentrations. Uptake rate constants were estimated using non-linear regression methods. Depuration rate constants were estimated by linear regression of the deputation phase following five-days exposure and as the second partial derivative of the non-linearmore » regression for the 28-day exposures. Uptake and deputation rate constants, bioconcentration factors and half-lives were similar regardless of exposure time, sediment fluoranthene concentration or use of data normalization. Uptake and deputation rate constants, bioconcentration factors and half-lives (days) were similar and low for all experiments, ranging from 0.02 to 0.10, 0.14 to 0.30, 0.09 to 0.46, and 2.4 to 5.0, respectively. Degradation by the mixed function oxidase system is not expected in oysters allowing the use of radiotracers for measuring very low concentrations of fluoranthene. The results suggest that short-term exposures followed by deputation are effective for estimating kinetic rate constants and that normalization provides little benefit in these controlled studies. The results further show that bioconcentration of sediment-associated fluoranthene, and possibly other polycyclic aromatic hydrocarbons, is very low compared to either dissolved forms or levels commonly used in regulatory actions.« less
Järvinen, Maiju A; Paaso, Janne; Paavola, Marko; Leiviskä, Kauko; Juuti, Mikko; Muzzio, Fernando; Järvinen, Kristiina
2013-11-01
Continuous processing is becoming popular in the pharmaceutical industry for its cost and quality advantages. This study evaluated the mechanical properties, uniformity of dosage units and drug release from the tablets prepared by continuous direct compression process. The tablet formulations consisted of acetaminophen (3-30% (w/w)) pre-blended with 0.25% (w/w) colloidal silicon dioxide, microcrystalline cellulose (69-96% (w/w)) and magnesium stearate (1% (w/w)). The continuous tableting line consisted of three loss-in-weight feeders and a convective continuous mixer and a rotary tablet press. The process continued for 8 min and steady state was reached within 5 min. The effects of acetaminophen content, impeller rotation rate (39-254 rpm) and total feed rate (15 and 20 kg/h) on tablet properties were examined. All the tablets complied with the friability requirements of European Pharmacopoeia and rapidly released acetaminophen. However, the relative standard deviation of acetaminophen content (10% (w/w)) increased with an increase in impeller rotation rate at a constant total feed rate (20 kg/h). A compression force of 12 kN tended to result in greater tablet hardness and subsequently a slower initial acetaminophen release from tablets when compared with those made with the compression force of about 8 kN. In conclusion, tablets could be successfully prepared by a continuous direct compression process and process conditions affected to some extent tablet properties.
NASA Astrophysics Data System (ADS)
Supramono, D.; Lusiani, S.
2016-11-01
Over the past few decades, interest in developing biomass-derived fuel has been increasing rapidly due to the decrease in fossil fuel reserves. Bio-oil produced by biomass pyrolysis however contains high oxygen compounds resulting in low calorific-value fuel and therefore requiring upgrading. In co-pyrolysis of the feed blend of plastics of High Density Polyethylene (HDPE) and biomass of com cob particles, at some compositions free radicals from plastic decomposition containing more hydrogen radicals are able to bond oxygen radicals originating from biomass to reduce oxygenate compounds in the bio-oil thus increasing bio-oil quality. This phenomenon is usually called synergetic effect. In addition to that, the pattern of heating of the feed blend in the pyrolysis reactor is predicted to affect biooil quality and yield. In a batch reactor, co-pyrolysis of corncobs and HDPE requires low heating rate to reach a peak temperature at temperature rise period followed by heating for some time at peak temperature called holding time at constant temperature period. No research has been carried out to investigate how long holding time is set in co-pyrolysis of plastic and biomass to obtain high yield of bio-oil. Holding time may affect either crosslinking of free radicals in gas phase, which increases char product, or secondary pyrolysis in the gas phase, which increases non-condensable gas in the gas phase of pyrolysis reactor, both of which reduce bio-oil yield. Therefore, holding time of co-pyrolysis affects the mass rate of bio-oil formation as the pyrolysis proceeds and quality of the bio-oil. In the present work, effects of holding time on the yield and quality of bio-oil have been investigated using horizontal fixed bed of the feed blends at heating rate of 5°C, peak temperature of 500°C and N2 flow rate of 700 ml/minute. Holding time was varied from 0 to 70 minutes with 10 minutes interval. To investigate the effects of holding time, the composition of HDPE in the feed blend was varied 0, 50 and 100%, while the synergetic effect was investigated by varying the composition of HDPE in the feed blend 0, 25, 50, 75, and 100%. The results show that synergetic effect for non-oxygenate compound production started to work at 63% HDPE in the feed blend and beyond. It was observed that extension of holding time exceeding 0 minutes allowed increase ofbio-oil production rate followed reduction of the rate. Pyrolysis ofboth the corncob feed and the feed blend containing 50% HDPE equally reached maximum bio-oil production rate at holding time of 50 minutes, while that of HDPE feed at 30 minutes. The result pertaining to holding time indicates that biomass in the feed blend governs crosslinking - secondary pyrolysis in the co-pyrolysis.
Gamma radiation tolerance in different life stages of the fruit fly Drosophila melanogaster.
Paithankar, Jagdish Gopal; Deeksha, K; Patil, Rajashekhar K
2017-04-01
Insects are known to have higher levels of radiation tolerance than mammals. The fruit fly Drosophila provides opportunities for genetic analysis of radiation tolerance in insects. A knowledge of stage-specific sensitivity is required to understand the mechanisms and test the existing hypothesis of insect radiation tolerance. Drosophila melanogaster were irradiated using gamma rays at different life stages. Irradiation doses were chosen to start from 100-2200 Gy with increments of 100 Gy, with a dose rate of 12.5 and 25 Gy/min. The threshold of mortality, LD 50 and LD 100 1 h post-irradiation was recorded for larvae and adults and 24 h post-irradiation for eggs and after 2-3 days for early and late pupae. Total antioxidant capacity for all the life stages was measured using the phosphomolybdenum method. Twenty-four hours post-irradiation, 100% mortality was recorded for eggs at 1000 Gy. One hour post irradiation 100% mortality was recorded at 1300 Gy for first instar larvae, 1700 Gy for second instar larvae, 1900 Gy for feeding third instar larvae and 2200 Gy for non-feeding third instar larvae. Post-irradiation complete failure of emergence (100% mortality) was observed at 130 Gy for early pupae and 1500 Gy for late pupae; 100% mortality was observed at 1500 Gy for adults. The values of LD 50 were recorded as 452 Gy for eggs, 1049 Gy for first instar larvae, 1350 Gy for second instar larvae, 1265 Gy for feeding third instar larvae, 1590 Gy for non-feeding third instar larvae, 50 Gy for early pupae, 969 Gy for late pupae, 1228 Gy for adult males and 1250 Gy for adult females. Early pupae were found to be prone to radiation, whereas the non-feeding third instar larvae were most resistant among all stages. The chromosome number being constant and total antioxidant capacity being nearly constant in all stages, we suggest that high rate of cell division during early pupae makes this stage sensitive to radiation.
Tussey, Dylan A; Aukema, Brian H; Charvoz, Anthony M; Venette, Robert C
2018-06-06
Emerald ash borer, Agrilus planipennis Fairmaire (Coleoptera: Buprestidae), an invasive beetle from Asia, spreads through human-mediated movement and active flight. The effects of adult feeding and overwintering conditions on A. planipennis energy reserves (e.g., lipid, glycogen, and sugars) and flight are poorly understood. We conjectured that the potential energetic demands associated with the production of cryoprotectants might affect dispersal capacity and partially explain slower spread of A. planipennis in Minnesota than in the other states. Two studies sought to measure the effects of adult feeding on lipid content and flight capacity. Adult A. planipennis were fed shamel ash, Fraxinus uhdei Wenzig, leaves for 0-20 d after emergence, and half were flown on a custom flight mill for 24 h, before being frozen for comparative lipid analysis with a control group. The second study compared the effects of adult feeding on energy reserves and flight capacity of A. planipennis that were originally from St. Paul, Minnesota but overwintered in infested logs placed in Grand Rapids, Minnesota (low winter temperature, -34°C) or St. Paul, Minnesota (-26.3°C). Live adults consumed foliage at a constant rate, but lipid content (percentage of fresh mass) did not change with increases in feeding or flight. Adult glycogen content declined with flight and increased only slightly with feeding. Overwintering location affected survival rates but not energy reserves or flight capacity. These results suggest that the flight capacity of A. planipennis is largely determined before emergence, with no differences in energy reserves after cryoprotectant investment.
Longer guts and higher food quality increase energy intake in migratory swans.
van Gils, Jan A; Beekman, Jan H; Coehoorn, Pieter; Corporaal, Els; Dekkers, Ten; Klaassen, Marcel; van Kraaij, Rik; de Leeuw, Rinze; de Vries, Peter P
2008-11-01
1. Within the broad field of optimal foraging, it is increasingly acknowledged that animals often face digestive constraints rather than constraints on rates of food collection. This therefore calls for a formalization of how animals could optimize food absorption rates. 2. Here we generate predictions from a simple graphical optimal digestion model for foragers that aim to maximize their (true) metabolizable food intake over total time (i.e. including nonforaging bouts) under a digestive constraint. 3. The model predicts that such foragers should maintain a constant food retention time, even if gut length or food quality changes. For phenotypically flexible foragers, which are able to change the size of their digestive machinery, this means that an increase in gut length should go hand in hand with an increase in gross intake rate. It also means that better quality food should be digested more efficiently. 4. These latter two predictions are tested in a large avian long-distance migrant, the Bewick's swan (Cygnus columbianus bewickii), feeding on grasslands in its Dutch wintering quarters. 5. Throughout winter, free-ranging Bewick's swans, growing a longer gut and experiencing improved food quality, increased their gross intake rate (i.e. bite rate) and showed a higher digestive efficiency. These responses were in accordance with the model and suggest maintenance of a constant food retention time. 6. These changes doubled the birds' absorption rate. Had only food quality changed (and not gut length), then absorption rate would have increased by only 67%; absorption rate would have increased by only 17% had only gut length changed (and not food quality). 7. The prediction that gross intake rate should go up with gut length parallels the mechanism included in some proximate models of foraging that feeding motivation scales inversely to gut fullness. We plea for a tighter integration between ultimate and proximate foraging models.
Effects of feeding and stocking density on digestion of cultured Atlantic salmon Salmo salar L.
NASA Astrophysics Data System (ADS)
Sun, Guoxiang; Zheng, Jimeng; Liu, Baoliang; Liu, Ying
2014-11-01
The combined effects of feeding rate (0.8%, 1.0%, and 1.2% initial body weight/day), feeding frequency (two, three, and four times/day) and stocking density (10, 15, and 20 kg/m3) in recirculating aquaculture systems (RAS) on growth performance, digestion and waste generation of Atlantic salmon ( Salmo salar L.) were investigated in an 8-week orthogonal experiment (L9(3)3) with a constant daily water renewal at 7.50% of total volume. No mortality occurred during the experimental period. Feed conversion ratio (FCR) varied from 0.90 to 1.13 and specific growth rate (SGR) ranged from 0.48% to 0.69%/day. SGR, thermal growth coefficient (TGC) and FCR were not significantly ( P>0.05) affected by the three factors, while net protein utilization (NPU) was significantly ( P<0.05) affected. Apparent digestibility coefficients (ADC) of dry matter in the present study were in the range 66.12%-73.55%. ADC in protein, lipid and energy were statistically different among all treatments and in the range of 90.07%-93.67%, 81.54%-89.15%, and 67.55%-71.87%, respectively. The proportion of mean total ammonia nitrogen excreted ranged from 1.37% to 1.64% of feed nitrogen at steady state, and the concentration of nitrogenous and phosphorus compounds were differently correlated to the three factors. The results will provide valuable reference data for culture management decisions in the Atlantic salmon farming industry.
Effect of moisture content on fed batch composting reactor of vegetable and fruit wastes.
Jolanun, B; Tripetchkul, S; Chiemchaisri, C; Chaiprasert, P; Towprayoon, S
2005-03-01
Vegetable and fruit wastes mixed with sawdust were composted in a laboratory scale reactor by controlling the waste feeding rate at 21 kg m(-3) day(-1) and aeration rate at 10.6 l m(-3) min(-1). The effects of initial moisture content on organic matter degradation and process performance of fed batch composting were investigated. The absolute amount of removal, removal percentage, and removal rate of dry mass obtained were substantially different among the initial moisture contents. The rapid rise of moisture content and the lowest absolute amount of removal observed were achieved in the 50% condition. The initial moisture content yielding the largest absolute amount of removal in both feeding and curing stage was 30% whereas the removal percentage and rate constant of waste decomposition were highest in the 50% condition. Examined by traditional soil physics method, the moisture content at 50-55% was suitable for satisfying the degree of free air space (65-70%) of compost during the fed batch composting. Most degradable organic matter was mainly consumed in the feeding stage as indicated by a higher removal rate of dry mass in all cases. It is recommended that the initial moisture content of 30% and mode of aeration and agitation should be adopted for achieving practical fed batch composting of vegetable and fruit wastes. The study also demonstrated that the composting kinetics of vegetable and fruit wastes mixed with sawdust can be described by a first order model.
NASA Astrophysics Data System (ADS)
Li, Ming-zhou; Zhou, Jie-min; Tong, Chang-ren; Zhang, Wen-hai; Chen, Zhuo; Wang, Jin-liang
2018-05-01
Based on the principle of multiphase equilibrium, a mathematical model of the copper flash converting process was established by the equilibrium constant method, and a computational system was developed with the use of MetCal software platform. The mathematical model was validated by comparing simulated outputs, industrial data, and published data. To obtain high-quality blister copper, a low copper content in slag, and increased impurity removal rate, the model was then applied to investigate the effects of the operational parameters [oxygen/feed ratio (R OF), flux rate (R F), and converting temperature (T)] on the product weights, compositions, and the distribution behaviors of impurity elements. The optimized results showed that R OF, R F, and T should be controlled at approximately 156 Nm3/t, within 3.0 pct, and at approximately 1523 K (1250 °C), respectively.
Growth and energy requirements of captive-reared Common Loon (Gavia immer) chicks
Fournier, F.; Karasov, W.H.; Kenow, K.P.; Meyer, M.W.
2007-01-01
We measured the energy requirements during postnatal development of six hand-reared Common Loon (Gavia immer) chicks using continuous feeding trials and doubly labeled water. At fledging, the mean (± SE) body mass of chicks was 3,246 ± 51 g. They reached asymptotic body mass in ≈66 days and had a mean growth rate constant of 0.089 ± 0.002 day−1, which was greater than growth rate constants of other, similar-sized precocial birds. Between hatch and day 66, chicks allocated 16.5% of their metabolizable energy to new tissue, lower than the average for other bird species (20%), which might be expected considering their precocial mode of development. There was a developmental change in the assimilation efficiency of food (metabolizable energy coefficient), with a mean of 0.64 ± 0.03 in chicks aged 21 days, rising to 0.83 ± 0.07 in chicks aged 35 days.
Mauky, Eric; Weinrich, Sören; Jacobi, Hans-Fabian; Nägele, Hans-Joachim; Liebetrau, Jan; Nelles, Michael
2017-08-01
For future energy supply systems with high proportions from renewable energy sources, biogas plants are a promising option to supply demand-driven electricity to compensate the divergence between energy demand and energy supply by uncontrolled sources like wind and solar. Apart expanding gas storage capacity a demand-oriented feeding with the aim of flexible gas production can be an effective alternative. The presented study demonstrated a high degree of intraday flexibility (up to 50% compared to the average) and a potential for an electricity shutdown of up to 3 days (decreasing gas production by more than 60%) by flexible feeding in full-scale. Furthermore, the long-term process stability was not affected negatively due to the flexible feeding. The flexible feeding resulted in a variable rate of gas production and a dynamic progression of individual acids and the respective pH-value. In consequence, a demand-driven biogas production may enable significant savings in terms of the required gas storage volume (up to 65%) and permit far greater plant flexibility compared to constant gas production. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.
Environmental effects on nutrient and energy metabolism in ruminants.
Tamminga, S; Schrama, J W
1998-01-01
Domesticated animals all over the world are subjected to a wide variety of environmental conditions and challenges. Any deviation from "normal" may result in adaptive behavior of which changes in feed intake or feed intake pattern is by far the most important. Adaptive behavior may further include influences on passage rate of feed residues through the digestive tract, resulting in changes in digestibility. Adaptive behavior may also result in changes in heat production, either to maintain body temperature constant, or as a result of an elevated body temperature. Important environmental challenges are infectious diseases. Mild (sub-clinical) infections usually result in reduced performance, without affecting feed intake or digestibility. Severe infections may disrupt the barriers between the internal metabolism and the respiratory and/or digestive tract, resulting in severe losses of energy and protein. This situation is notably apparent in severe infections with parasites of the gastrointestinal tract and may be associated with severe protein losses. Feeding high protein diets may partly alleviate the negative effects. Contamination of air, water and feed may occasionally cause problems in farm animals. Such contamination may include pathogenic microbes, toxic secondary fungal metabolites and heavy metals. Negative effects associated with such contamination often show an impaired reproductive efficiency, but their influence on the utilization of energy and nutrients is not well documented.
Cryogenic Integration of the 2-14 GHz Eleven Feed in a Wideband Receiver for VLBI2010
NASA Technical Reports Server (NTRS)
Pantaleev, Miroslaw; Jang, Jian; Karadikar, Yogesh; Helldner, Leif; Klein, Benjamin; Haas, Rudiger; Zaman, Ashraf; Zamani, Mojtaba; Kildal, Per-Simon
2010-01-01
The next generation VLBI systems require the design of a wideband receiver covering the 2-14 GHz range, necessitating a wideband feed. Presented here are the 2009 development of a cryogenic 2-14 GHz Eleven feed for reflector radio telescope antennas, including its integration into a cryogenic receiver. The Eleven feed is designed for dual linear polarization and consists of four log-periodic folded dipole arrays. Each pair of arrays is fed by a differential two-wire transmission line connected either to balun or a differential LNA. The present configuration has been measured in many configurations, at various independent labs - corresponding simulations have been done. The results show (across the band) a high polarization efficiency for the feed, with a nearly constant beam width, a reflection coefficient below -10dB, and a constant phase center. Electrical parameters under cryogenic conditions and measured receiver noise temperatures are presented.
Artificial milk-feeding women׳s views of their feeding choice in Ireland.
Carroll, Margaret; Gallagher, Louise; Clarke, Mike; Millar, Sally; Begley, Cecily
2015-06-01
despite the well-documented benefits of breast feeding to both mother and child, breast-feeding initiation rates in Ireland are the second lowest in Europe. This study set out to explore the views of women from low socio-economic groups in Ireland on their choice to feed their infants artificial milk, and to elicit factors that may encourage these women to breast feed in the future. a qualitative descriptive approach was used. data were collected through recorded focus groups and individual interviews, using a semi-structured interview schedule. Data were transcribed verbatim. interviews took place in two regions in the Republic of Ireland, north and south. a purposive sample was drawn from the population of 2572 women taking part in the Irish Infant Feeding Study who had never breast fed previously, had intended to, and had, fed this infant artificial milk and who had completed their education before they were 18 years of age. Two focus groups with two women in each were conducted and six women took part in individual interviews. constant comparative analysis was performed to construct the categories and concepts that led to the final themes. these artificial milk-feeding women based their infant feeding decision on many social and experiential factors. The major influences on their decisions were: personal attitudes toward feeding methods, and external influences on infant feeding methods. Attitudes towards other women and feeding future infants reinforced a strong preference towards artificial milk feeding. it is apparent that a prevailing culture that is unreceptive to breast feeding and the lack of positive breast-feeding role models, contributed to a strong commitment to artificial milk feeding for these participants. Promotion of breast feeding must take account of the complex contexts in which women make decisions. Advice regarding breast feeding should take account of women׳s feelings and avoid undue pressure, while still promoting the benefits of breast feeding to women and their families. Copyright © 2015 Elsevier Ltd. All rights reserved.
Zelić, B; Bolf, N; Vasić-Racki, D
2006-06-01
Three different models: the unstructured mechanistic black-box model, the input-output neural network-based model and the externally recurrent neural network model were used to describe the pyruvate production process from glucose and acetate using the genetically modified Escherichia coli YYC202 ldhA::Kan strain. The experimental data were used from the recently described batch and fed-batch experiments [ Zelić B, Study of the process development for Escherichia coli-based pyruvate production. PhD Thesis, University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, Croatia, July 2003. (In English); Zelić et al. Bioproc Biosyst Eng 26:249-258 (2004); Zelić et al. Eng Life Sci 3:299-305 (2003); Zelić et al Biotechnol Bioeng 85:638-646 (2004)]. The neural networks were built out of the experimental data obtained in the fed-batch pyruvate production experiments with the constant glucose feed rate. The model validation was performed using the experimental results obtained from the batch and fed-batch pyruvate production experiments with the constant acetate feed rate. Dynamics of the substrate and product concentration changes was estimated using two neural network-based models for biomass and pyruvate. It was shown that neural networks could be used for the modeling of complex microbial fermentation processes, even in conditions in which mechanistic unstructured models cannot be applied.
Measurement of gastric emptying during and between meal intake in free-feeding Lewis rats.
van der Velde, P; Koslowsky, I; Koopmans, H S
1999-02-01
A new scintigraphic measurement technique is described that allows accurate assessment of gastric emptying in between as well as during a number of successive meals. Measurements were made every minute of food intake, gastric nutrient filling, and gastric emptying over a 6 h, 40 min period in conscious, free-feeding, loosely restrained rats. Before receiving access to the food, the animals had been deprived for a period of 31 h. Over the full duration of the experiment, an average rate of gastric emptying of 2.46 +/- 0.18 (SE) kcal/h was established. During most meals, however, the gastric emptying rate was increased so that an average of 26.9 +/- 2.7% of the ingested calories was emptied while the animals were feeding, with an average emptying rate of 0.15 +/- 0.014 kcal/min or 8.88 +/- 0.84 kcal/h. This transient increase in the rate of gastric emptying was followed by a subsequent slowing of gastric emptying after meal termination; in the 10-min postmeal interval, an average emptying rate of 0.96 +/- 0.12 kcal/h was found. Despite these fluctuations during and immediately after meals, a relatively constant rate of caloric emptying is maintained over longer periods. There were no differences between the emptying rate during the first meal when the gastrointestinal tract was still empty, compared with later meals when the gastrointestinal tract had been filled with food. The emptying rate during the 10-min postmeal interval, however, was significantly reduced during later meals. The results suggest that gastric emptying is controlled by different mechanisms during and after the ingestion of food and that these mechanisms remain in effect at various degrees of gastrointestinal filling.
Peng, Jing; Cao, Zhen-Dong; Fu, Shi-Jian
2014-10-01
We investigated the effects of constant and diel-fluctuating temperature acclimation on the thermal tolerance, swimming capacity, specific dynamic action (SDA) and growth performance of juvenile Chinese bream (Parabramis pekinensis). The critical thermal maxima (CTmax), critical thermal minima (CTmin), lethal thermal maxima (LTmax), lethal thermal minima (LTmin), critical swimming speed (Ucrit) and fast-start escape response after 30 d acclimation to three constant temperatures (15, 20 and 25 °C) and one diel-fluctuating temperature (20±5 °C) were measured. In addition, feeding rate (FR), feeding efficiency (FE) and specific growth rate (SGR) were measured. The diel-fluctuating temperature group showed lower CTmin than the 20 °C group but a similar CTmax, indicating a wider thermal scope. SDA linearly increased with the temperature. Temperature variation between 20 and 25 °C had little effect on either swimming or growth performance. However, fish in the 15 °C group exhibited much poorer swimming and growth performance than those in the 20 °C group. Ucrit decreased slightly under low acclimation temperature due to the pronounced improvement in swimming efficiency under cold temperature. Fish in the diel-fluctuating temperature group fed more but exhibited similar SGR compared to 20 °C group, possibly due in part to an increase in energy expenditure to cope with the temperature fluctuation. The narrower thermal scope and lower CTmax of Chinese bream together with the conservation of CTmax with temperature acclimation, suggests that local water temperature elevations may have more profound effects on Chinese bream than on other fish species in the Three Gorges Reservoir. Copyright © 2014 Elsevier Inc. All rights reserved.
Li, J; Li, XM; Caudill, M; Malysheva, O; Bardag-Gorce, F; Oliva, J; French, BA; Gorce, E; Morgan, K; Kathirvel, E; Morgan, T; French, SW
2011-01-01
Background Blood alcohol levels (BAL) cycle up and down over a 7–8 day period when ethanol is fed continuously for one month in the intragastric tube feeding rat model (ITFRM) of alcoholic liver disease. The cycling phenomenon is due to an alternating increase and decrease in the metabolic rate. Recently, we found that S-adenosyl-methionine (SAMe) fed with alcohol prevented the BAL cycle. Method Using the ITFRM we fed rats betaine (2 g/kg/day) with ethanol for 1 month and recorded the daily 24 h urine ethanol level (UAL) to measure the BAL cycle. UAL is equivalent to BAL because of the constant ethanol infusion. Liver histology, steatosis and BAL were measured terminally after 1 month of treatment. Microarray analysis was done on the mRNA extracted from the liver to determine the effects of betaine and alcohol on changes in gene expression. Results Betaine fed with ethanol completely prevented the BAL cycle similar to SAMe. Betaine also significantly reduced the BAL compared to ethanol fed rats without betaine. This was also observed when SAMe was fed with ethanol. The mechanism involved in both cases is that SAMe is required for the conversion of epinephrine from norepinephrine by phenylethanolamine methyltransferase (PNMT). Epinephrine is 5 to 10 fold more potent than norepinephrine in increasing the metabolic rate. The increase in the metabolic rate generates NAD, permitting ADH to increase the oxidation of alcohol. NAD is the rate limiting factor in oxidation of alcohol by alcohol dehydrogenase (ADH). This explains how SAMe and betaine prevented the cycle. Microarray analysis showed that betaine feeding prevented the up regulation of a large number of genes including TLR2/4, Il-1b, Jax3, Sirt3, Fas, Ifngr1, Tgfgr2, Tnfrsf21, Lbp and Stat 3 which could explain how betaine prevented fatty liver. Conclusion Betaine feeding lowers the BAL and prevents the BAL cycle by increasing the metabolic rate. This increases the rate of ethanol elimination by generating NAD. PMID:21708146
A parametric study of the microwave plasma-assisted combustion of premixed ethylene/air mixtures
NASA Astrophysics Data System (ADS)
Fuh, Che A.; Wu, Wei; Wang, Chuji
2017-11-01
A parametric study of microwave argon plasma assisted combustion (PAC) of premixed ethylene/air mixtures was carried out using visual imaging, optical emission spectroscopy and cavity ringdown spectroscopy as diagnostic tools. The parameters investigated included the plasma feed gas flow rate, the plasma power, the fuel equivalence ratio and the total flow rate of the fuel/air mixture. The combustion enhancement effects were characterized by the minimum ignition power, the flame length and the fuel efficiency of the combustor. It was found that: (1) increasing the plasma feed gas flow rate resulted in a decrease in the flame length, an increase in the minimum ignition power for near stoichiometric fuel equivalence ratios and a corresponding decrease in the minimum ignition power for ultra-lean and rich fuel equivalence ratios; (2) at a constant plasma power, increasing the total flow rate of the ethylene/air mixture from 1.0 slm to 1.5 slm resulted in an increase in the flame length and a reduction in the fuel efficiency; (3) increasing the plasma power resulted in a slight increase in flame length as well as improved fuel efficiency with fewer C2(d) and CH(A) radicals present downstream of the flame; (4) increasing the fuel equivalence ratio caused an increase in flame length but at a reduced fuel efficiency when plasma power was kept constant; and (5) the ground state OH(X) number density was on the order of 1015 molecules/cm3 and was observed to drop downstream along the propagation axis of the flame at all parameters investigated. Results suggest that each of the parameters independently influences the PAC processes.
Dozier, W A; Lott, B D; Branton, S L
2005-08-01
This study examined the effects of varying air velocities vs. a constant air velocity with a cyclic temperature curve of 25-30-25 degrees C and a dew point of 23 degrees C on broilers from 28 to 49 d of age. Four replicate trials were conducted. In each trial, 742 male broilers were randomly allocated to 6 floor pens or 2 air velocity tunnels, with each tunnel consisting of 4 pens. Bird density, feeder, and waterer space were similar across all pens (53 birds/ pen; 0.07 m2/bird). The treatments were control (still air), constant air velocity of 120 m/min, and increasing air velocity (90 m/min from 28 to 35 d, 120 m/min from 36 to 42 d, and 180 m/min from 43 to 49 d). Birds grown in a still air environment gained less weight, consumed less feed, and converted feed less efficiently between 28 and 49 d than birds subjected to moving air (constant or increasing). Growth responses between the air velocity treatments were similar from 28 to 35 and 36 to 42 d of age. Increasing air velocity to 180 m/min improved (P < or = 0.02) the growth rate of broilers from 43 to 49 d of age over birds receiving an air velocity of 120 m/min, but the incidence of mortality was not affected. These results provide evidence that increasing air velocity from 120 to 180 m/min is beneficial to broilers weighing 2.5 kg or greater when exposed to moderate temperatures.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lai, H.C.; Yang, H.; Lasekan, J.
1990-02-26
Male, Sprague-Dawley rats (154{plus minus}1 g) were fed diets containing 2% corn oil (CO) + 14% butterfat (BF), beef tallow (BT), olive oil (OO) or coconut oil (CN) vs a 16% CO control diet for 5 weeks. Changes in plasma TG specific activity (dpm/mg TG) were determined in individual unanesthetized rats after injection of 100 {mu}Ci (2-{sup 3}H)-glycerol via a carotid cannula. Fractional rate constants were obtained using a 2-compartment model and nonlinear regression analysis. Results demonstrated no difference in the fractional rate constants among dietary groups; but, differences in the rates of hepatic TG secretion were noted. Rats fedmore » BT showed a higher rate of hepatic TG secretion than rats fed CO. Rats fed BF, OO or CN showed somewhat higher rates of hepatic TG secretion than CO. VLDL TG, phospholipid, and apolipoprotein B and E levels were higher with saturated fats vs CO. The data suggest that the higher plasma TG levels noted in response to feeding saturated fats vs corn oil can be explained, in part, by an increased flux of hepatic TG secretion.« less
Control of parallel manipulators using force feedback
NASA Technical Reports Server (NTRS)
Nanua, Prabjot
1994-01-01
Two control schemes are compared for parallel robotic mechanisms actuated by hydraulic cylinders. One scheme, the 'rate based scheme', uses the position and rate information only for feedback. The second scheme, the 'force based scheme' feeds back the force information also. The force control scheme is shown to improve the response over the rate control one. It is a simple constant gain control scheme better suited to parallel mechanisms. The force control scheme can be easily modified for the dynamic forces on the end effector. This paper presents the results of a computer simulation of both the rate and force control schemes. The gains in the force based scheme can be individually adjusted in all three directions, whereas the adjustment in just one direction of the rate based scheme directly affects the other two directions.
Mulat, Daniel Girma; Jacobi, H Fabian; Feilberg, Anders; Adamsen, Anders Peter S; Richnow, Hans-Hermann; Nikolausz, Marcell
2016-01-15
Flexible biogas production that adapts biogas output to energy demand can be regulated by changing feeding regimes. In this study, the effect of changes in feeding intervals on process performance, microbial community structure, and the methanogenesis pathway was investigated. Three different feeding regimes (once daily, every second day, and every 2 h) at the same organic loading rate were studied in continuously stirred tank reactors treating distiller's dried grains with solubles. A larger amount of biogas was produced after feeding in the reactors fed less frequently (once per day and every second day), whereas the amount remained constant in the reactor fed more frequently (every 2 h), indicating the suitability of the former for the flexible production of biogas. Compared to the conventional more frequent feeding regimes, a methane yield that was up to 14% higher and an improved stability of the process against organic overloading were achieved by employing less frequent feeding regimes. The community structures of bacteria and methanogenic archaea were monitored by terminal restriction fragment length polymorphism (T-RFLP) analysis of 16S rRNA and mcrA genes, respectively. The results showed that the composition of the bacterial community varied under the different feeding regimes, and the observed T-RFLP patterns were best explained by the differences in the total ammonia nitrogen concentrations, H2 levels, and pH values. However, the methanogenic community remained stable under all feeding regimes, with the dominance of the Methanosarcina genus followed by that of the Methanobacterium genus. Stable isotope analysis showed that the average amount of methane produced during each feeding event by acetoclastic and hydrogenotrophic methanogenesis was not influenced by the three different feeding regimes. Copyright © 2016, American Society for Microbiology. All Rights Reserved.
Mulat, Daniel Girma; Jacobi, H. Fabian; Feilberg, Anders; Adamsen, Anders Peter S.; Richnow, Hans-Hermann
2015-01-01
Flexible biogas production that adapts biogas output to energy demand can be regulated by changing feeding regimes. In this study, the effect of changes in feeding intervals on process performance, microbial community structure, and the methanogenesis pathway was investigated. Three different feeding regimes (once daily, every second day, and every 2 h) at the same organic loading rate were studied in continuously stirred tank reactors treating distiller's dried grains with solubles. A larger amount of biogas was produced after feeding in the reactors fed less frequently (once per day and every second day), whereas the amount remained constant in the reactor fed more frequently (every 2 h), indicating the suitability of the former for the flexible production of biogas. Compared to the conventional more frequent feeding regimes, a methane yield that was up to 14% higher and an improved stability of the process against organic overloading were achieved by employing less frequent feeding regimes. The community structures of bacteria and methanogenic archaea were monitored by terminal restriction fragment length polymorphism (T-RFLP) analysis of 16S rRNA and mcrA genes, respectively. The results showed that the composition of the bacterial community varied under the different feeding regimes, and the observed T-RFLP patterns were best explained by the differences in the total ammonia nitrogen concentrations, H2 levels, and pH values. However, the methanogenic community remained stable under all feeding regimes, with the dominance of the Methanosarcina genus followed by that of the Methanobacterium genus. Stable isotope analysis showed that the average amount of methane produced during each feeding event by acetoclastic and hydrogenotrophic methanogenesis was not influenced by the three different feeding regimes. PMID:26497462
Tang, Kai; Ooi, Gordon T H; Litty, Klaus; Sundmark, Kim; Kaarsholm, Kamilla M S; Sund, Christina; Kragelund, Caroline; Christensson, Magnus; Bester, Kai; Andersen, Henrik R
2017-07-01
Previous studies have demonstrated that aerobic moving bed biofilm reactors (MBBRs) remove pharmaceuticals better than activated sludge. Thus we used a MBBR system to polish the effluent of an activated sludge wastewater treatment plant. To overcome that effluent contains insufficient organic matter to sustain enough biomass, the biofilm was intermittently fed with raw wastewater. The capacity of pharmaceutical degradation was investigated by spiking pharmaceuticals. Actual removal during treatment was assessed by sampling the inlets and outlets of reactors. The removal of the majority of pharmaceuticals was enhanced through the intermittent feeding of the MBBR. First-order rate constants for pharmaceutical removal, normalised to biomass, were significantly higher compared to other studies on activated sludge and suspended biofilms, especially for diclofenac, metoprolol and atenolol. Due to the intermittently feeding, degradation of diclofenac occurred with a half-life of only 2.1h and was thus much faster than any hitherto described wastewater bioreactor treatment. Copyright © 2017 Elsevier Ltd. All rights reserved.
Lee, J T; Bailey, C A; Cartwright, A L
2003-10-01
High concentrations of guar meal in poultry diets deleteriously affect growth, feed intake, and digesta viscosity. These effects are attributed to residual gum in the meal. A 2 x 5 factorial experiment investigated the impacts of two guar meal fractions (germ and hull) at five inclusion levels (0, 2.5, 5.0, 7.5, and 10.0%) on intestinal viscosity, measures of growth, and feed conversion in broiler chickens fed to 20 d of age. Growth and feed conversion ratio were not affected by inclusion of as much as 7.5% of the germ fraction into poultry diets, while inclusion of the hull fraction reduced growth at all concentrations. The hull fraction increased intestinal viscosity at all inclusion levels fed, although feed conversion was not affected until the inclusion rate exceeded 5.0%. The germ fraction significantly increased intestinal viscosity at 7.5 and 10% inclusion rates. When germ fraction was fed, relative organ weights remained constant through all concentrations except for the ventriculus and duodenum at 7.5 and 10% inclusion levels. Relative pancreas weight was significantly increased at the 10% level of the hull fraction. Increases in intestinal viscosity corresponded with growth depression. These results suggest that residual gum was responsible for some deleterious effects seen when guar meal was fed. The germ fraction was a superior ingredient when compared with the hull fraction. The guar meal germ fraction constituting as much as 7.5% of the diet supported growth and feed conversion measures similar to those observed with a typical corn-soybean poultry ration.
2007-03-01
mitoses, some cells arrest in G2 while other cells continue to divide. In sea urchin and frog embryos, the first 12 cell cycles are known to be driven...with interlaced feedback and feed forward control loops, the hand-waving approach flounders in a stormy sea of conflicting signals, endless...we reduced the rate constants for degradation of Clb2, as described in the publication. Experiment Copies/cell, mean ± SEM (fold increase
Electrospinning of Polyvinylidene Fluoride and Polyetherimide From Mixed Solvents
NASA Technical Reports Server (NTRS)
Morgret, Leslie D.; Pawlowski, Kristin J.; Hinkley, Jeffrey A.
2005-01-01
Polyvinylidene fluoride and Ultem(TradeMark) polyetherimide were dissolved in 50/50 acetone/N,N dimethylformamide (DMF) and 80/20 tetrahydrofuran/DMF, respectively, and electrospun. Polymer solution concentrations and molecular weights were changed while other spinning parameters (voltage, distance, solution feed rate) were held constant. Fiber diameters in the resulting electrospun mats varied from 0.25 to 4.4 microns, increasing with polymer concentration and molecular weight; trends in diameter were compared with trends in viscosities and surface tensions of the spinning solutions.
Caspeta, Luis; Lara, Alvaro R; Pérez, Néstor O; Flores, Noemí; Bolívar, Francisco; Ramírez, Octavio T
2013-08-10
Traditional strategies for production of thermo-induced recombinant protein in Escherichia coli consist of a two-phase culture, with an initial growth stage at low temperature (commonly 30°C) followed by a production stage where temperature is increased stepwise (commonly up to 42°C). A disadvantage of such strategies is that growth is inhibited upon temperature increase, limiting the duration of the production stage and consequently limiting recombinant protein production. In this work, a novel oscillatory thermo-induction strategy, consisting on temperature fluctuations between 37 and 42°C or 30 and 42°C, was tested for improving recombinant protein production. In addition, the induction schemes were combined with one of three different nutrient feeding strategies: two exponential and one linear. Recombinant human preproinsulin (HPPI), produced under control of the λP(L)-cI857 system in the E. coli BL21 strain, was used as the model protein. Compared to the conventional induction scheme at constant temperature (42°C), longer productive times were attained under oscillatory induction, which resulted in a 1.3- to 1.7-fold increase in maximum HPPI concentration. Temperature oscillations led to a 2.3- to 4.0-fold increase in biomass accumulation and a decrease of 48-62% in the concentration of organic acids, compared to conventional induction. Under constant induction, growth ceased upon temperature increase and the maximum concentration of HPPI was 3.9 g/L, regardless of the post-induction feeding strategy used. In comparison, the combination of temperature oscillations and a high nutrient-feeding rate allowed sustained growth after induction and reaching up to 5.8 g/L of HPPI. Copyright © 2013 Elsevier B.V. All rights reserved.
NASA Astrophysics Data System (ADS)
Braudrick, C. A.; Minear, J. T.; Dietrich, W. E.; Dehart, M.; Sklar, L. S.
2008-12-01
One of the largest uncertainties in routing sediment through drainage networks is predicting the degree to which changes in sediment supply are mitigated by changes in sediment storage in bars. We hypothesize that changes in topographic steering link sediment supply and bar morphology. This hypothesis posits that increased sediment supply would enhance topographic steering over the bar, causing the bar to advance laterally into the pool. Contrarily, decreased supply would diminish topographic steering, causing bars to shrink laterally and pools to expand. We examined this hypothesis in a 28-m long, 0.86-m wide flume with a constant discharge of 5.4 l/s and sand with a median grain size of 0.8 mm. The conditions were sufficient to support alternate bars downstream of the upper 8-10 m, and the flume was run for approximately 65 hours at a constant discharge and sediment feed. The equilibrium slope was 0.0033. Once the channel reached equilibrium, the sediment feed was turned off while the discharge was held constant. During the first 25 hours after the feed was stopped, the sediment transport rate at the downstream end of the flume increased from 9.8 to 10.5 kg/hr as sediment was provided by incision at the upstream end of the flume. Because the bed was the only sediment source, sediment supply increased with distance down the flume. Once the feed was shut off, bar response differed between the upstream and downstream portions of the flume. Bars at the downstream end of the flume, where sediment supply increased relative to equilibrium conditions, swelled into the pool. These changes in bar morphology were accompanied by a decrease in surface grain size. Further upstream, where sediment supply was lower, the bars shrunk. These results suggest that there may be a linkage between topographic steering, bar morphology, and sediment supply, but further numerical tests and experimental manipulations are necessary to verify this linkage and to account for the effect of the decreased surface grain size of the bars.
Wang, J; Chen, J; Xu, R; Xu, Z
2008-01-01
Batch and fed-batch production of recombinant human epidermal growth factor (hEGF) was studied in an E. coli secretary expression system. By using MMBL medium containing 5 g/L glucose, controlling the temperature at 32 degrees C and maintaining the dissolved oxgen level over 20% saturation, a high yield of hEGF (32 mg/L) was obtained after an 18 hr batch cultivation with 0.2 mM IPTG induction at mid-log phase. Three different glucose feeding strategies were employed to further improve hEGF productivity in a bench top fermentor. Compared with the batch results, hEGF yield was improved up to 25.5% or 28.1%, respectively by intermittent or pH-stat glucose feeding, and up to 150% improvement of hEGF production was achieved by constant feeding of 200 g/L glucose solution at a rate of 0.11 mL/min. The effects of further combined feeding with other medium components and inducer on hEGF yield were also examined in the benchtop fermentor. This work is very helpful to further improve the productivity of extracellular hEGF in the recombinant E. coli system.
Granule size control and targeting in pulsed spray fluid bed granulation.
Ehlers, Henrik; Liu, Anchang; Räikkönen, Heikki; Hatara, Juha; Antikainen, Osmo; Airaksinen, Sari; Heinämäki, Jyrki; Lou, Honxiang; Yliruusi, Jouko
2009-07-30
The primary aim of the study was to investigate the effects of pulsed liquid feed on granule size. The secondary aim was to increase knowledge of this technique in granule size targeting. Pulsed liquid feed refers to the pump changing between on- and off-positions in sequences, called duty cycles. One duty cycle consists of one on- and off-period. The study was performed with a laboratory-scale top-spray fluid bed granulator with duty cycle length and atomization pressure as studied variables. The liquid feed rate, amount and inlet air temperature were constant. The granules were small, indicating that the powder has only undergone ordered mixing, nucleation and early growth. The effect of atomizing pressure on granule size depends on inlet air relative humidity, with premature binder evaporation as a reason. The duty cycle length was of critical importance to the end product attributes, by defining the extent of intermittent drying and rewetting. By varying only the duty cycle length, it was possible to control granule nucleation and growth, with a wider granule size target range in increased relative humidity. The present study confirms that pulsed liquid feed in fluid bed granulation is a useful tool in end product particle size targeting.
Fine-tuned Remote Laser Welding of Aluminum to Copper with Local Beam Oscillation
NASA Astrophysics Data System (ADS)
Fetzer, Florian; Jarwitz, Michael; Stritt, Peter; Weber, Rudolf; Graf, Thomas
Local beam oscillation in remote laser welding of aluminum to copper was investigated. Sheets of 1 mm thickness were welded in overlap configuration with aluminum as top material. The laser beam was scanned in a sinusoidal mode perpendicular to the direction of feed and the influence of the oscillation parameters frequency and amplitude on the weld geometry was investigated. Scanning frequencies up to 1 kHz and oscillation amplitudes in the range from 0.25 mm to 1 mm were examined. Throughout the experiments the laser power and the feed rate were kept constant. A decrease of welding depth with amplitude and frequency is found. The scanning amplitude had a strong influence and allowed coarse setting of the welding depth into the lower material, while the frequency allowed fine tuning in the order of 10% of the obtained depth. The oscillation parameters were found to act differently on the aluminum sheet compared to copper sheet regarding the amount of fused material. It is possible to influence the geometry of the fused zones separately for both sheets. Therefore the average composition in the weld can be set with high precision via the oscillation parameters. A setting of the generated intermetallics in the weld zone is possible without adjustment of laser power and feed rate.
Top-level dynamics and the regulated gene response of feed-forward loop transcriptional motifs.
Mayo, Michael; Abdelzaher, Ahmed; Perkins, Edward J; Ghosh, Preetam
2014-09-01
Feed-forward loops are hierarchical three-node transcriptional subnetworks, wherein a top-level protein regulates the activity of a target gene via two paths: a direct-regulatory path, and an indirect route, whereby the top-level proteins act implicitly through an intermediate transcription factor. Using a transcriptional network of the model bacterium Escherichia coli, we confirmed that nearly all types of feed-forward loop were significantly overrepresented in the bacterial network. We then used mathematical modeling to study their dynamics by manipulating the rise times of the top-level protein concentration, termed the induction time, through alteration of the protein destruction rates. Rise times of the regulated proteins exhibited two qualitatively different regimes, depending on whether top-level inductions were "fast" or "slow." In the fast regime, rise times were nearly independent of rapid top-level inductions, indicative of biological robustness, and occurred when RNA production rate-limits the protein yield. Alternatively, the protein rise times were dependent upon slower top-level inductions, greater than approximately one bacterial cell cycle. An equation is given for this crossover, which depends upon three parameters of the direct-regulatory path: transcriptional cooperation at the DNA-binding site, a protein-DNA dissociation constant, and the relative magnitude of the top-level protien concentration.
Segregation control in vertical Bridgman crystal growth
NASA Astrophysics Data System (ADS)
Tao, Y.; Kou, S.
1996-11-01
To help the crystal grow at a constant dopant concentration in vertical Bridgman crystal growth, the dopant concentration of the growth melt, i.e. the melt from which the crystal grows, was kept constant. To achieve this, three different methods were used to replenish the growth melt at a controlled rate and suppress dopant diffusion between the growth melt and the replenishing melt. In method one, a replenishing crucible having a long melt passageway was immersed in the growth melt. In method two, a replenishing crucible having an independent feed-rate control mechanism was held above the growth melt. In method three, a submerged diffusion baffle was used to form a long melt passageway between the growth melt and the replenishing melt. NaNO 3 was used as a model material for crystal growth. Single crystals were grown by these three methods with effective segregation control. Method two was applied to InSb and single crystals were also grown with effective segregation control.
Packed- and fluidized-bed biofilm reactor performance for anaerobic wastewater treatment.
Denac, M; Dunn, I J
1988-07-05
Anaerobic degradation performance of a laboratory-scale packed-bed reactor (PBR) was compared with two fluidized-bed biofilm reactors (FBRs) on molasses and whey feeds. The reactors were operated under constant pH (7) and temperature (35 degrees C) conditions and were well mixed with high recirculation rates. The measured variables were chemical oxygen demand (COD), individual organic acids, gas composition, and gas rates. As carrier, sand of 0.3-0.5 mm diameter was used in the FBR, and porous clay spheres of 6 mm diameter were used in the PBR. Startup of the PBR was achieved with 1-5 day residence times. Start-up of the FBR was only successful if liquid residence times were held low at 2-3 h. COD degradations of 86% with molasses (90% was biodegradable) were reached in both the FBR and PBR at 6 h residence time and loadings of 10 g COD/L day. At higher loadings the FBR gave the best performance; even at 40-45 g COD/L day, with 6 h residence times, 70% COD was degraded. The PBR could not be operated above 20 g COD/L day without clogging. A comparison of the reaction rates show that the PBR and FBR per formed similarly at low concentrations in the reactors up to 1 g COD/L, while above 3 g COD/L the rates were 17.4 g COD/L day for the PBR and 38.4 g COD/L day for the FBR. This difference is probably due to diffusion limitations and a less active biomass content of the PBR compared with the fluidized bed.The results of dynamic step change experiments, in which residence times and feed concentrations were changed hanged at constant loading, demonstrated the rapid response of the reactors. Thus, the response times for an increase in gas rate or an increase in organic acids due to an increase in feed concentration were less than 1 day and could be explained by substrate limitation. Other slower responses were observed in which the reactor culture adapted over periods of 5-10 days; these were apparently growth related. An increase in loading of over 100% always resulted in large increases inorganic acids, especially acetic and propionic, as well as large increases in the CO(2) gas content. In general, the CO(2) content of the gas was very low, due to the large amount of dissolved CO(2) that exited with the liquid phase at low residence times. The performance of the FBR with whey was comparable to its performance with molasses, and switching of molasses to whey feed resulted in immediate good performance without adaptation.
Artificial neural networks for processing fluorescence spectroscopy data in skin cancer diagnostics
NASA Astrophysics Data System (ADS)
Lenhardt, L.; Zeković, I.; Dramićanin, T.; Dramićanin, M. D.
2013-11-01
Over the years various optical spectroscopic techniques have been widely used as diagnostic tools in the discrimination of many types of malignant diseases. Recently, synchronous fluorescent spectroscopy (SFS) coupled with chemometrics has been applied in cancer diagnostics. The SFS method involves simultaneous scanning of both emission and excitation wavelengths while keeping the interval of wavelengths (constant-wavelength mode) or frequencies (constant-energy mode) between them constant. This method is fast, relatively inexpensive, sensitive and non-invasive. Total synchronous fluorescence spectra of normal skin, nevus and melanoma samples were used as input for training of artificial neural networks. Two different types of artificial neural networks were trained, the self-organizing map and the feed-forward neural network. Histopathology results of investigated skin samples were used as the gold standard for network output. Based on the obtained classification success rate of neural networks, we concluded that both networks provided high sensitivity with classification errors between 2 and 4%.
High-rate operant behavior in two mouse strains: a response-bout analysis.
Johnson, Joshua E; Pesek, Erin F; Newland, M Christopher
2009-06-01
Operant behavior sometimes occurs in bouts characterized by an initiation rate, within-bout response rate, and bout length. The generality of this structure was tested using high-rate nose-poking in mice. Reinforcement of short interresponse times produced high response rates while a random-interval schedule held reinforcement rates constant. BALB/c mice produced bouts that were more frequent, longer, and contained a higher within-bout rate of responding (nine nose-pokes/s) than did the C57BL/6 mice (five nose-pokes/s). Adding a running wheel decreased total nose-pokes and bout length, and increased bout-initiation rate. Free-feeding reduced nose-poking by decreasing bout-initiation rate. Photoperiod reversal decreased bout-initiation rate but not total nose-poke rate. Despite strain differences in bout structure, both strains responded similarly to the interventions. The three bout measures were correlated with overall rate but not with each other. Log-survival analyses provided independent descriptors of the structure of high-rate responding in these two strains.
NASA Technical Reports Server (NTRS)
Bartrand, Timothy A.
1988-01-01
During the shutdown of the space shuttle main engine, oxygen flow is shut off from the fuel preburner and helium is used to push the residual oxygen into the combustion chamber. During this process a low frequency combustion instability, or chug, occurs. This chug has resulted in damage to the engine's augmented spark igniter due to backflow of the contents of the preburner combustion chamber into the oxidizer feed system. To determine possible causes and fixes for the chug, the fuel preburner was modeled as a heterogeneous stirred tank combustion chamber, a variable mass flow rate oxidizer feed system, a constant mass flow rate fuel feed system and an exit turbine. Within the combustion chamber gases were assumed perfectly mixed. To account for liquid in the combustion chamber, a uniform droplet distribution was assumed to exist in the chamber, with mean droplet diameter determined from an empirical relation. A computer program was written to integrate the resulting differential equations. Because chamber contents were assumed perfectly mixed, the fuel preburner model erroneously predicted that combustion would not take place during shutdown. The combustion rate model was modified to assume that all liquid oxygen that vaporized instantaneously combusted with fuel. Using this combustion model, the effect of engine parameters on chamber pressure oscillations during the SSME shutdown was calculated.
Development of an Ultra-Wideband Circularly Polarized Multiple Layer Dielectric Rod Antenna Design
NASA Astrophysics Data System (ADS)
Wainwright, Gregory D.
This dissertations focuses on the development of a novel Ultra-Wideband (UWB) circularly polarized dielectric rod antenna (CPDRA) which yields a constant gain, pattern, and phase center. These properties are important in many applications. Within radar systems a constant phase center is desirable to avoid errors within downrange and crossrange measurements. In a reflector antenna the illumination, spillover, and phase efficiencies will remain the same over an ultra-wideband. Lastly, near field probes require smooth amplitude and phase patterns over frequency to avoid errors during the calibration process of the antenna under test. In this dissertation a novel CP feeding network has been developed for an ultra-wideband dielectric rod antenna. Circularly-polarized antennas have a major advantage over its linearly-polarized counterpart in that the polarization mismatch loss caused by misalignment between the polarizations of the incident fields and antenna can be avoided. This is important in satellite communications and broadcasts where signal propagation through the ionosphere can experience Faraday Rotation. A circularly polarized antenna is also helpful in mobile radar and communication systems where the receiving antennas orientation is not fixed. Previous research on UWB dielectric rod antenna designs has focused on Dual linear feeds. Each polarization within the dual linear feed is excited by a pair of linear launcher arms fed with a 0°-180° hybrid balun. The proposed CPDRA design does not require the 0°-180° hybrid baluns or 0°-90° hybrid for achieving CP operation. These hybrids will increase the antennas size, weight, cost, and reduce operational bandwidth. A design technique has been developed for an UWB multilayer dielectric waveguide used in a CPDRA antenna. This design technique uses near-field Electric field data from inside the waveguide, in conjunction with a genetic algorithm optimization to yield a wideband waveguide with a near field amplitude distribution that scales with frequency. A multilayered dielectric waveguide presents many fabrication challenges. The thermal expansion rates, moisture absorption rates, and vibration properties differ within the various dielectric materials used. Therefore, the development of a wideband waveguide using one material with a low dielectric constant would be advantages since 3-D printing technology can be utilized. In this dissertation novel TE01 and TM01 mode suppressors have been developed using only a single dielectric material.
Prey density and the behavioral flexibility of a marine predator: The common murre (Uria aalge)
Harding, A.M.A.; Piatt, John F.; Schmutz, J.A.; Shultz, M.T.; van Pelt, Thomas I.; Kettle, Arthur B.; Speckman, Suzann G.
2007-01-01
Flexible time budgets allow individual animals to buffer the effects of variable food availability by allocating more time to foraging when food density decreases. This trait should be especially important for marine predators that forage on patchy and ephemeral food resources. We examined flexible time allocation by a long-lived marine predator, the Common Murre (Uria aalge), using data collected in a five-year study at three colonies in Alaska (USA) with contrasting environmental conditions. Annual hydroacoustic surveys revealed an order-of-magnitude variation in food density among the 15 colony-years of study. We used data on parental time budgets and local prey density to test predictions from two hypotheses: Hypothesis A, the colony attendance of seabirds varies nonlinearly with food density; and Hypothesis B, flexible time allocation of parent murres buffers chicks against variable food availability. Hypothesis A was supported; colony attendance by murres was positively correlated with food over a limited range of poor-to-moderate food densities, but independent of food over a broader range of higher densities. This is the first empirical evidence for a nonlinear response of a marine predator's time budget to changes in prey density. Predictions from Hypothesis B were largely supported: (1) chick-feeding rates were fairly constant over a wide range of densities and only dropped below 3.5 meals per day at the low end of prey density, and (2) there was a nonlinear relationship between chick-feeding rates and time spent at the colony, with chick-feeding rates only declining after time at the colony by the nonbrooding parent was reduced to a minimum. The ability of parents to adjust their foraging time by more than 2 h/d explains why they were able to maintain chick-feeding rates of more than 3.5 meals/d across a 10-fold range in local food density. ?? 2007 by the Ecological Society of America.
Westby, K. M.
2015-01-01
Biotic and abiotic factors change seasonally and impact life history in temperate-zone ectotherms. Temperature and photoperiod are factors that change in predictable ways. Most studies testing for effects of temperature on vectors use constant temperatures and ignore potential correlated effects of photoperiod. In two experiments, we tested for effects of larval rearing environments creating ecologically relevant temperatures and photoperiods simulating early and late season conditions (June and August), or constant temperatures (cool and warm) with the June or August photoperiods, respectively. We determined effects on survivorship, development, size, and a composite performance index in a temperate-zone population of Aedes triseriatus (Say). We followed cohorts of resulting females, all held under the same environmental conditions, to assess carry-over effects of rearing conditions for larvae on longevity, blood feeding, and egg production. Larval survivorship was affected by treatment in one experiment. Development time was greater in the June and cool treatments, but the constant and fluctuating temperatures did not differ. Significantly larger mosquitoes were produced in fluctuating versus constant temperature treatments. There were no significant treatment effects on the composite performance index. Adult female longevity was lower after rearing at constant versus fluctuating temperature, but there was no difference between June and August, nor did size affect longevity. There was no effect of treatments on blood feeding and a limited effect on egg production. We conclude that seasonal temperatures and photoperiods during development have limited effects on this population of A. triseriatus and find little evidence of strong effects of fluctuating versus constant temperatures. PMID:26336255
Carey, Michael P.; Zimmerman, Christian E.
2014-01-01
Lake ecosystems in the Arctic are changing rapidly due to climate warming. Lakes are sensitive integrators of climate-induced changes and prominent features across the Arctic landscape, especially in lowland permafrost regions such as the Arctic Coastal Plain of Alaska. Despite many studies on the implications of climate warming, how fish populations will respond to lake changes is uncertain for Arctic ecosystems. Least Cisco (Coregonus sardinella) is a bellwether for Arctic lakes as an important consumer and prey resource. To explore the consequences of climate warming, we used a bioenergetics model to simulate changes in Least Cisco production under future climate scenarios for lakes on the Arctic Coastal Plain. First, we used current temperatures to fit Least Cisco consumption to observed annual growth. We then estimated growth, holding food availability, and then feeding rate constant, for future projections of temperature. Projected warmer water temperatures resulted in reduced Least Cisco production, especially for larger size classes, when food availability was held constant. While holding feeding rate constant, production of Least Cisco increased under all future scenarios with progressively more growth in warmer temperatures. Higher variability occurred with longer projections of time mirroring the expanding uncertainty in climate predictions further into the future. In addition to direct temperature effects on Least Cisco growth, we also considered changes in lake ice phenology and prey resources for Least Cisco. A shorter period of ice cover resulted in increased production, similar to warming temperatures. Altering prey quality had a larger effect on fish production in summer than winter and increased relative growth of younger rather than older age classes of Least Cisco. Overall, we predicted increased production of Least Cisco due to climate warming in lakes of Arctic Alaska. Understanding the implications of increased production of Least Cisco to the entire food web will be necessary to predict ecosystem responses in lakes of the Arctic.
Carey, Michael P; Zimmerman, Christian E
2014-01-01
Lake ecosystems in the Arctic are changing rapidly due to climate warming. Lakes are sensitive integrators of climate-induced changes and prominent features across the Arctic landscape, especially in lowland permafrost regions such as the Arctic Coastal Plain of Alaska. Despite many studies on the implications of climate warming, how fish populations will respond to lake changes is uncertain for Arctic ecosystems. Least Cisco (Coregonus sardinella) is a bellwether for Arctic lakes as an important consumer and prey resource. To explore the consequences of climate warming, we used a bioenergetics model to simulate changes in Least Cisco production under future climate scenarios for lakes on the Arctic Coastal Plain. First, we used current temperatures to fit Least Cisco consumption to observed annual growth. We then estimated growth, holding food availability, and then feeding rate constant, for future projections of temperature. Projected warmer water temperatures resulted in reduced Least Cisco production, especially for larger size classes, when food availability was held constant. While holding feeding rate constant, production of Least Cisco increased under all future scenarios with progressively more growth in warmer temperatures. Higher variability occurred with longer projections of time mirroring the expanding uncertainty in climate predictions further into the future. In addition to direct temperature effects on Least Cisco growth, we also considered changes in lake ice phenology and prey resources for Least Cisco. A shorter period of ice cover resulted in increased production, similar to warming temperatures. Altering prey quality had a larger effect on fish production in summer than winter and increased relative growth of younger rather than older age classes of Least Cisco. Overall, we predicted increased production of Least Cisco due to climate warming in lakes of Arctic Alaska. Understanding the implications of increased production of Least Cisco to the entire food web will be necessary to predict ecosystem responses in lakes of the Arctic. PMID:24963391
Carey, Michael P; Zimmerman, Christian E
2014-05-01
Lake ecosystems in the Arctic are changing rapidly due to climate warming. Lakes are sensitive integrators of climate-induced changes and prominent features across the Arctic landscape, especially in lowland permafrost regions such as the Arctic Coastal Plain of Alaska. Despite many studies on the implications of climate warming, how fish populations will respond to lake changes is uncertain for Arctic ecosystems. Least Cisco (Coregonus sardinella) is a bellwether for Arctic lakes as an important consumer and prey resource. To explore the consequences of climate warming, we used a bioenergetics model to simulate changes in Least Cisco production under future climate scenarios for lakes on the Arctic Coastal Plain. First, we used current temperatures to fit Least Cisco consumption to observed annual growth. We then estimated growth, holding food availability, and then feeding rate constant, for future projections of temperature. Projected warmer water temperatures resulted in reduced Least Cisco production, especially for larger size classes, when food availability was held constant. While holding feeding rate constant, production of Least Cisco increased under all future scenarios with progressively more growth in warmer temperatures. Higher variability occurred with longer projections of time mirroring the expanding uncertainty in climate predictions further into the future. In addition to direct temperature effects on Least Cisco growth, we also considered changes in lake ice phenology and prey resources for Least Cisco. A shorter period of ice cover resulted in increased production, similar to warming temperatures. Altering prey quality had a larger effect on fish production in summer than winter and increased relative growth of younger rather than older age classes of Least Cisco. Overall, we predicted increased production of Least Cisco due to climate warming in lakes of Arctic Alaska. Understanding the implications of increased production of Least Cisco to the entire food web will be necessary to predict ecosystem responses in lakes of the Arctic.
Coprecipitation mechanisms and products in manganese oxidation in the presence of cadmium
Hem, J.D.; Lind, Carol J.
1991-01-01
Manganese oxidation products were precipitated in an aerated open-aqueous system where a continuous influx of mixed Mn2+ and Cd2+ solution was supplied and pH was maintained with an automated pH-stat adding dilute NaOH. X-ray diffraction and electron diffraction identified the solids produced as mixtures of Cd2Mn34+O8, Mn2+2Mn4+3O8, MnO2 (ramsdellite), and CdCO3. Mean oxidation numbers of the total precipitated Mn as great as 3.6 were reached during titrations. During subsequent aging in solution, oxidation numbers between 3.8 and 3.9 were reached in some precipitates in less than 40 days. Conditional oxidation rate constants calculated from a crystal-growth equation applied to titration data showed the overall precipitation rate, without considering manganese oxidation state in the precipitate, was increased by a factor of ~4 to ~7 when the mole ratio (Cd/Mn + Cd) of cadmium in the feed solution was 0.40 compared with rate constants for hausmannite (Mn2+Mn23+O4 precipitation under similar conditions but without accessory metals. Kinetic experiments were made to test effects of various Cd/Mn + Cd mole ratios and rates of addition of the feed solution, different temperatures from 5.0 to 35??C, and pH from 8.0 to 9.0. Oxidation rates were slower when the Cd mole ratio was less than 0.40. The rate increased by a factor of ~10 when pH was raised one-half unit. The effect of temperature on the rate constants was also substantial, but the meaning of this is uncertain because the rate of formation of Mn4+ oxide in the absence of Cd or other accessory metals was too slow to be measurable in titration experiments. The increased rate of Mn4+ oxide formation in the presence of Cd2+ can be ascribed to the formation of a labile adsorbed intermediate, CdMn2O4 Int, an analog of hausmannite, formed on precipitate surfaces at the beginning of the oxidation process. The increased lability of this structure, resulting from coordination-chemical behavior of Cd2+ during the titration, causes a rapid second-stage rearrangement and facilitates disproportionation of the Mn3+ ions. The Mn2+ ions thus released provide a positive feedback mechanism that couples the two steps of the conversion of Mn2+ to Mn4+ more closely than is possible when other metal ions besides manganese are not present. During aging of precipitates in contact with solutions, proportions of Cd2Mn3O8 and MnO2 increased at the expense of other precipitate components. ?? 1991.
Van Dyke, James U; Griffith, Oliver W; Thompson, Michael B
2014-08-01
Mechanisms of reproductive allocation are major determinants of fitness because embryos cannot complete development without receiving sufficient nutrition from their parents. The nourishment of offspring via placentas (placentotrophy) has evolved repeatedly in vertebrates, including multiple times in squamate reptiles (lizards and snakes). Placentotrophy has been suggested to evolve only if food is sufficiently abundant throughout gestation to allow successful embryogenesis. If scarcity of food prevents successful embryogenesis, females should recoup nutrients allocated to embryos via abortion, reabsorption, and/or cannibalism. We tested these hypotheses in the placentotrophic southern grass skink Pseudemoia entrecasteauxii. We fed females one of four diets (high constant, high variable, low constant, and low variable) during gestation and tested the effects of both food amount and schedule of feeding on developmental success, cannibalism rate, placental nutrient transport, offspring size, and maternal growth and body condition. Low food availability reduced developmental success, placental nutrient transport, offspring size, and maternal growth and body condition. Cannibalism of offspring also increased when food was scarce. Schedule of feeding did not affect offspring or mothers. We suggest that high food abundance and ability to abort and cannibalize poor-quality offspring are permissive factors necessary for placentotrophy to be a viable strategy of reproductive allocation.
Agrawal, Gaurav; Oh, Jungmin; Sreedhar, Balamurali; Tie, Shan; Donaldson, Megan E; Frank, Timothy C; Schultz, Alfred K; Bommarius, Andreas S; Kawajiri, Yoshiaki
2014-09-19
In this article, we extend the simulated moving bed reactor (SMBR) mode of operation to the production of propylene glycol methyl ether acetate (DOWANOL™ PMA glycol ether) through the esterification of 1-methoxy-2-propanol (DOWANOL™ PM glycol ether) and acetic acid using AMBERLYST™ 15 as a catalyst and adsorbent. In addition, for the first time, we integrate the concept of modulation of the feed concentration (ModiCon) to SMBR operation. The performance of the conventional (constant feed) and ModiCon operation modes of SMBR are analyzed and compared. The SMBR processes are designed using a model based on a multi-objective optimization approach, where a transport dispersive model with a linear driving force for the adsorption rate has been used for modeling the SMBR system. The adsorption equilibrium and kinetics parameters are estimated from the batch and single column injection experiments by the inverse method. The multiple objectives are to maximize the production rate of DOWANOL™ PMA glycol ether, maximize the conversion of the esterification reaction and minimize the consumption of DOWANOL™ PM glycol ether which also acts as the desorbent in the chromatographic separation. It is shown that ModiCon achieves a higher productivity by 12-36% over the conventional operation with higher product purity and recovery. Copyright © 2014 Elsevier B.V. All rights reserved.
Control of polymer network topology in semi-batch systems
NASA Astrophysics Data System (ADS)
Wang, Rui; Olsen, Bradley; Johnson, Jeremiah
Polymer networks invariably possess topological defects: loops of different orders. Since small loops (primary loops and secondary loops) both lower the modulus of network and lead to stress concentration that causes material failure at low deformation, it is desirable to greatly reduce the loop fraction. We have shown that achieving loop fraction close to zero is extremely difficult in the batch process due to the slow decay of loop fraction with the polymer concentration and chain length. Here, we develop a modified kinetic graph theory that can model network formation reactions in semi-batch systems. We demonstrate that the loop fraction is not sensitive to the feeding policy if the reaction volume maintains constant during the network formation. However, if we initially put concentrated solution of small junction molecules in the reactor and continuously adding polymer solutions, the fractions of both primary loop and higher-order loops will be significantly reduced. There is a limiting value (nonzero) of loop fraction that can be achieved in the semi-batch system in condition of extremely slow feeding rate. This minimum loop fraction only depends on a single dimensionless variable, the product of concentration and with single chain pervaded volume, and defines an operating zone in which the loop fraction of polymer networks can be controlled through adjusting the feeding rate of the semi-batch process.
Effect of Feed Composition on Cold-Cap Formation in Laboratory-Scale Melter
DOE Office of Scientific and Technical Information (OSTI.GOV)
Dixon, Derek R.; Schweiger, Michael J.; Lee, Seung Min
The development of advanced glass formulations are a part of the plan for reducing the cost and time for treatment and vitrification of the 210,000 m3 of nuclear waste at the Hanford Site in southeastern Washington State. One property of interest in this development is melt viscosity, which has a decisive influence on the rate of glass production. In an electric melter, the conversion process from feed-to-glass above the melt pool occurs in the cold cap. At the final stage of conversion when the glass-forming melt becomes connected, gas evolving reactions cause foaming. The melt viscosity affects foam stability. Threemore » glasses were formulated with viscosities of 1.5, 3.5, and 9.5 Pa s at 1150°C by varying the SiO2 content at the expense of B2O3, Li2O, and Na2O kept at constant proportions. Cold caps were produced by charging simulated high-alumina, high-level waste feeds in a laboratory-scale melter (LSM). The spread of the feed on the cold cap during charging and the cross-sectional structure of the final cold caps were compared. The amount of the foam and the size of the bubbles increased as the viscosity increased.« less
Sun, Yahui; Liao, Qiang; Huang, Yun; Xia, Ao; Fu, Qian; Zhu, Xun; Fu, Jingwei; Li, Jun
2018-05-01
Considering the variations of optimal light intensity required by microalgae cells along with growth phases, growth-phase light-feeding strategies were proposed and verified in this paper, aiming at boosting microalgae lipid productivity from the perspective of light conditions optimization. Experimental results demonstrate that under an identical time-averaged light intensity, the light-feeding strategies characterized by stepwise incremental light intensities showed a positive effect on biomass and lipid accumulation. The lipid productivity (235.49 mg L -1 d -1 ) attained under light-feeding strategy V (time-averaged light intensity: 225 μmol m -2 s -1 ) was 52.38% higher over that obtained under a constant light intensity of 225 μmol m -2 s -1 . Subsequently, based on light-feeding strategy V, microalgae lipid productivity was further elevated to 312.92 mg L -1 d -1 employing a two-stage based light-feeding strategy V 560 (time-averaged light intensity: 360 μmol m -2 s -1 ), which was 79.63% higher relative to that achieved under a constant light intensity of 360 μmol m -2 s -1 . Copyright © 2018 Elsevier Ltd. All rights reserved.
Coconut leaf bioactivity toward generalist maize insect pests
USDA-ARS?s Scientific Manuscript database
Tropical plants are often more resistant to insects than temperate plants due to evolution of robust defenses to cope with a more constant insect threat. Coconut (Cocos nucifera L.) has very few chewing leaf feeding insect pests and was tested against two omnivorous leaf feeding caterpillar species,...
A model of the evolution of larval feeding rate in Drosophila driven by conflicting energy demands.
Mueller, Laurence D; Barter, Thomas T
2015-02-01
Energy allocation is believed to drive trade-offs in life history evolution. We develop a physiological and genetic model of energy allocation that drives evolution of feeding rate in a well-studied model system. In a variety of stressful environments Drosophila larvae adapt by altering their rate of feeding. Drosophila larvae adapted to high levels of ammonia, urea, and the presence of parasitoids evolve lower feeding rates. Larvae adapted to crowded conditions evolve higher feeding rates. Feeding rates should affect gross food intake, metabolic rates, and efficiency of food utilization. We develop a model of larval net energy intake as a function of feeding rates. We show that when there are toxic compounds in the larval food that require energy for detoxification, larvae can maximize their energy intake by slowing their feeding rates. While the reduction in feeding rates may increase development time and decrease competitive ability, we show that genotypes with lower feeding rates can be favored by natural selection if they have a sufficiently elevated viability in the toxic environment. This work shows how a simple phenotype, larval feeding rates, may be of central importance in adaptation to a wide variety of stressful environments via its role in energy allocation.
Callewaert, Raf; De Vuyst, Luc
2000-01-01
Amylovorin L471 is a small, heat-stable, and hydrophobic bacteriocin produced by Lactobacillus amylovorus DCE 471. The nutritional requirements for amylovorin L471 production were studied with fed-batch fermentations. A twofold increase in bacteriocin titer was obtained when substrate addition was controlled by the acidification rate of the culture, compared with the titers reached with constant substrate addition or pH-controlled batch cultures carried out under the same conditions. An interesting feature of fed-batch cultures observed under certain culture conditions (constant feed rate) is the apparent stabilization of bacteriocin activity after obtaining maximum production. Finally, a mathematical model was set up to simulate cell growth, glucose and complex nitrogen source consumption, and lactic acid and bacteriocin production kinetics. The model showed that bacterial growth was dependent on both the energy and the complex nitrogen source. Bacteriocin production was growth associated, with a simultaneous bacteriocin adsorption on the producer cells dependent on the lactic acid accumulated and hence the viability of the cells. Both bacteriocin production and adsorption were inhibited by high concentrations of the complex nitrogen source. PMID:10653724
Helping Your Child Learn Self-Care.
ERIC Educational Resources Information Center
Murphy, Linda; Corte, Suzanne Della
1987-01-01
Practical advice for parents of handicapped children is the focus of this issue on self-care skills including self-feeding, dressing, and personal hygiene. Ten initial tips for teaching skills to children include constant repetition, modeling, and keeping verbal instruction to a minimum. The section on self-feeding addresses the topics of…
NASA Astrophysics Data System (ADS)
Rachmawati, D.; Samidjan, I.
2018-04-01
The purpose of this study was to determine the effect of adding phytase enzyme in the feed on digestibility of feed, efficiency of feed utilization, relative growth rate and survival rate of Common carp (Cyprinus carpio). Fish samples in this research were Common carp with an average - weight of 3.34 ± 0,16 g/fish. The treatments were adding the phytase enzyme in the feed with the different level of doses. Those were A (0 U kg-1 feed), B (500 U kg-1 feed), C (1.000 U kg-1 feed g) and D (1.500 U kg-1 feed). Observation was conducted on digestibility of protein (ADCP), digestibility of phosphor (ADCF), efficiency of feed utilization (EFU), relative growth rate (RGR), protein efficiency ratio (PER), feed conversion ratio (FCR), survival rate (SR) and water quality parameters. The results show that the addition of phytase enzyme significantly (P<0.01) affected on ADCP, ADCF, EFU, RGR, FCR, and PER, on the other hand it insignificantly (P>0.05) affected on SR of common carp. Based on results, it was concluded that optimum doses of phytase enzyme feed in terms of digestibility of feed, efficiency utilization of Feed and growth rate of Common carp ranges from 943 to 1100 U kg-1 feed
Biodegradation of propylene glycol and associated hydrodynamic effects in sand.
Bielefeldt, Angela R; Illangasekare, Tissa; Uttecht, Megan; LaPlante, Rosanna
2002-04-01
At airports around the world, propylene glycol (PG) based fluids are used to de-ice aircraft for safe operation. PG removal was investigated in 15-cm deep saturated sand columns. Greater than 99% PG biodegradation was achieved for all flow rates and loading conditions tested, which decreased the hydraulic conductivity of the sand by 1-3 orders of magnitude until a steady-state minimum was reached. Under constant loading at 120 mg PG/d for 15-30 d, the hydraulic conductivity (K) decreased by 2-2.5 orders of magnitude when the average linear velocity of the water was 4.9-1.4 cm/h. Variable PG loading in recirculation tests resulted in slower conductivity declines and lower final steady-state conductivity than constant PG feeding. After significant sand plugging, endogenous periods of time without PG resulted in significant but partial recovery of the original conductivity. Biomass growth also increased the dispersivity of the sand.
Multi-stage microbial system for continuous hydrogen production
Kosourov, Sergey; Ghirardi, Maria L.; Seibert, Michael
2010-06-08
A method of using sequential chemostat culture vessels to provide continuous H.sub.2 production, in which photosynthetic O.sub.2 evolution and H.sub.2 photoproduction are separated physically into two separate bioreactors, comprising: a) growing a microorganism culture able to continuously generate H.sub.2 by photosynthetically producing cells at about the early-to-late log state in a first photobioreactor operating as a sulfur chemostat under aerobic and/or conditions; b) continuously feeding cells from the first photobioreactor to a second photobioreactor operating under anaerobic conditions and sulfur deprivation conditions resulting from constant uptake of sulfate in the first bioreactor and a low rate of culture flow between the first and second bioreactors, for induction of hydrogenase and H.sub.2 photoproduction to allow for continuous cultivation of the microorganism's cells in the first photobioreactor and constant H.sub.2 production in the second photobioreactor, and c) H.sub.2 gas from the second photobioreactor.
Fischer-Tropsch synthesis in supercritical phase carbon dioxide: Recycle rates
NASA Astrophysics Data System (ADS)
Soti, Madhav
With increasing oil prices and attention towards the reduction of anthropogenic CO2, the use of supercritical carbon dioxide for Fischer Tropsch Synthesis (FTS) is showing promise in fulfilling the demand of clean liquid fuels. The evidence of consumption of carbon dioxide means that it need not to be removed from the syngas feed to the Fischer Tropsch reactor after the gasification process. Over the last five years, research at SIUC have shown that FTS in supercritical CO2reduces the selectivities for methane, enhances conversion, reduces the net CO2produces in the coal to liquid fuels process and increase the life of the catalyst. The research has already evaluated the impact of various operating and feed conditions on the FTS for the once through process. We believe that the integration of unreacted feed recycle would enhance conversion, increase the yield and throughput of liquid fuels for the same reactor size. The proposed research aims at evaluating the impact of recycle of the unreacted feed gas along with associated product gases on the performance of supercritical CO2FTS. The previously identified conditions will be utilized and various recycle ratios will be evaluated in this research once the recycle pump and associated fittings have been integrated to the supercritical CO2FTS. In this research two different catalysts (Fe-Zn-K, Fe-Co-Zn-K) were analyzed under SC-FTS in different recycle rate at 350oC and 1200 psi. The use of recycle was found to improve conversion from 80% to close to 100% with both catalysts. The experiment recycle rate at 4.32 and 4.91 was clearly surpassing theoretical recycle curve. The steady state reaction rate constant was increased to 0.65 and 0.8 min-1 for recycle rate of 4.32 and 4.91 respectively. Carbon dioxide selectivity was decreased for both catalyst as it was converting to carbon monoxide. Carbon dioxide consumption was increased from 0.014 to 0.034 mole fraction. This concluded that CO2is being used in the system and converting which created the concentration of the feed gas higher inside the reactor. The research has provided the best conditions for the enhanced conversion while minimizing CO2formation. Though this research was not able to provide the optimal recycle rate it have created the path for the future research to proceed in the right direction. This reduction and utilization of CO2will help to reduce the cost of carbon dioxide removal and saves the environment from carbon dioxide emission.
Kusakisako, Kodai; Galay, Remil Linggatong; Umemiya-Shirafuji, Rika; Hernandez, Emmanuel Pacia; Maeda, Hiroki; Talactac, Melbourne Rio; Tsuji, Naotoshi; Mochizuki, Masami; Fujisaki, Kozo; Tanaka, Tetsuya
2016-08-19
Ticks are obligate hematophagous arthropods that feed on vertebrate blood that contains iron. Ticks also concentrate host blood with iron; this concentration of the blood leads to high levels of iron in ticks. The host-derived iron reacts with oxygen in the tick body and this may generate high levels of reactive oxygen species, including hydrogen peroxide (H2O2). High levels of H2O2 cause oxidative stress in organisms and therefore, antioxidant responses are necessary to regulate H2O2. Here, we focused on peroxiredoxin (Prx), an H2O2-scavenging enzyme in the hard tick Haemaphysalis longicornis. The mRNA and protein expression profiles of 2-Cys peroxiredoxin (HlPrx2) in H. longicornis were investigated in whole ticks and internal organs, and developmental stages, using real-time PCR and Western blot analysis during blood-feeding. The localization of HlPrx2 proteins in tick tissues was also observed by immunostaining. Moreover, knockdown experiments of HlPrx2 were performed using RNA interference to evaluate its function in ticks. Real-time PCR showed that HlPrx2 gene expression in whole ticks and internal organs was significantly upregulated by blood-feeding. However, protein expression, except in the midgut, was constant throughout blood-feeding. Knockdown of the HlPrx2 gene caused significant differences in the engorged body weight, egg weight and hatching rate for larvae as compared to the control group. Finally, detection of H2O2 after knockdown of HlPrxs in ticks showed that the concentration of H2O2 significantly increased before and after blood-feeding. Therefore, HlPrx2 can be considered important for successful blood-feeding and reproduction through the regulation of H2O2 concentrations in ticks before and after blood-feeding. This study contributes to the search for a candidate target for tick control and further understanding of the tick's oxidative stress coping mechanism during blood-feeding.
Xu, Chao; Li, Xiang-Fei; Tian, Hong-Yan; Jiang, Guang-Zhen; Liu, Wen-Bin
2016-04-01
This study aimed to investigate the optimal feeding rate for juvenile blunt snout bream (average initial weight 23.74 ± 0.09 g) based on the results on growth performance, intestinal digestive and absorptive capabilities and endocrine functions. A total of 840 fish were randomly distributed into 24 cages and fed a commercial feed at six feeding rates ranging from 2.0 to 7.0% body weight (BW)/day. The results indicated that weight gain rate increased significantly (P < 0.05) as feeding rates increased from 2.0 to 5.0% BW/day, but decreased with the further increasing feeding rates (P > 0.05). Protein efficiency ratio and nitrogen and energy retention all showed a similar trend. However, feed conversion ratio increased significantly (P < 0.05) with increasing feeding rates. Feeding rates have little effects (P > 0.05) on whole-body moisture, ash and protein contents, but significantly (P < 0.05) affect both lipid and energy contents with the highest values both observed in fish fed 4.0% BW/day. In addition, moderate ration sizes (2.0-4.0% BW/day) resulted in the enhanced activities of intestinal enzymes, including lipase, protease, Na(+), K(+)-ATPase, alkaline phosphatase and creatine kinase. Furthermore, the mRNA levels of growth hormone, insulin-like growth factors-I, growth hormone receptor and neuropeptide all increased significantly (P < 0.05) as feeding rates increased from 2.0 to 5.0% and 6.0% BW/day, but decreased significantly (P < 0.05) with the further increase in feeding rates, whereas both leptin and cholecystokinin expressions showed an opposite trend. Based on the broken-line regression analysis of SGR against feeding rates, the optimal feeding rate for juvenile blunt snout bream was estimated to be 4.57% BW/day.
Omnidirectional antenna having constant phase
DOE Office of Scientific and Technical Information (OSTI.GOV)
Sena, Matthew
Various technologies presented herein relate to constructing and/or operating an antenna having an omnidirectional electrical field of constant phase. The antenna comprises an upper plate made up of multiple conductive rings, a lower ground-plane plate, a plurality of grounding posts, a conical feed, and a radio frequency (RF) feed connector. The upper plate has a multi-ring configuration comprising a large outer ring and several smaller rings of equal size located within the outer ring. The large outer ring and the four smaller rings have the same cross-section. The grounding posts ground the upper plate to the lower plate while maintainingmore » a required spacing/parallelism therebetween.« less
NON-BLOCKING STABILIZED FEED BACK AMPLIFIER
Fairstein, E.
1960-03-01
A plural stuge nonblocking degenerative feed-back amplifier was designed particularly suitable for counting circuits because of the stability and linearity in operation, characterized by the fact that the inltial stage employs a cathode coupled input circuit fed from a cathode follower and the final stage has a tline constant greater than those of the other stages.
NASA Astrophysics Data System (ADS)
Rodgers, D. W.; Potter, K. E.; Shervais, J. W.; Champion, D. E.; Duncan, R. A.
2013-12-01
Project Hotspot's Kimama drill hole on the Snake River Plain, Idaho recovered a 1912 m thick section of basalt core that ranges in age from ~700 ka to at least 6.14 Ma, based on five 40Ar/39Ar analyses and twenty paleomagnetic age assignments. Fifty-four flow groups comprising 510 individual flows were defined, yielding an average recurrence interval of ~11,400 years between flows. Age-depth analysis indicate that, over thicknesses >150 m and age spans >500 k.y., accumulation rates were constant at 30 m/100 k.y. The existence and persistence of this linear accumulation rate for greater than 5 m.y. documents an external tectonic control on eruption dynamics. One conceptual model relates accumulation rates to horizontal crustal strain, such that far-field extension rate controls the periodicity of dikes that feed basalt flows. In this model, each of the 54 flow groups would have a deep-seated, relatively wide (1-10m) dike that branches upward into a network of narrow (10-100 cm) dikes feeding individual lava flows. Assuming an east-west lateral lava flow extent of up to 50 km, the Kimama data record a steady-state crustal strain rate of 10-9 to 10-10 y-1. This rate is comparable to modern, decadal strain rates measured with GPS in the adjacent Basin & Range province, but exceeds decadal strain rates of zero measured in the eastern Snake River Plain. Linear accumulation rates also provide insight into basalt subsidence history. In this model, the middle-upper crust subsides due to the added weight of lava flows, the added weight of mid-crustal sills/dikes, and thermal contraction in the wake of the Yellowstone hot spot. Isostatic compensation would occur in the (nearly) molten lower crust. Assuming constant surface elevation and a basalt density of 2.6 g/cm3, the lava flow weight would account for 87% of the burial through time, yielding a steady-state "tectonic" subsidence rate of 4 m/100 k.y. attributed to the driving forces of mid-crustal injection and/or thermal contraction. An even faster tectonic rate is likely, given the evidence for decreasing surface elevation through time. We propose that tectonic subsidence was a necessary condition for maintaining basalt eruption over such a long duration -- it would inhibit the growth of a topographic plateau and maintain an appropriate level of neutral buoyancy for the periodically ascending mantle-derived magma
Reflectance and optical constants for Cer-Vit from 250 to 1050 A
NASA Technical Reports Server (NTRS)
Osantowski, J. F.
1974-01-01
The reflectance for a bowl-feed polished Cer-Vit sample was measured at nine wavelengths and five angles of incidence from 15 to 85 deg. Optical constants were derived by the reflectance-vs-angle-of-incidence method and compared to previously reported values for ultralow-expansion fused silica and several other glasses. Surface-roughness corrections of the reflectance data and optical constants are discussed.
Zhu, Lin; Qualls, Whitney A.; Marshall, John M; Arheart, Kris L.; DeAngelis, Donald L.; McManus, John W.; Traore, Sekou F.; Doumbia, Seydou; Schlein, Yosef; Muller, Gunter C.; Beier, John C.
2015-01-01
BackgroundAgent-based modelling (ABM) has been used to simulate mosquito life cycles and to evaluate vector control applications. However, most models lack sugar-feeding and resting behaviours or are based on mathematical equations lacking individual level randomness and spatial components of mosquito life. Here, a spatial individual-based model (IBM) incorporating sugar-feeding and resting behaviours of the malaria vector Anopheles gambiae was developed to estimate the impact of environmental sugar sources and resting sites on survival and biting behaviour.MethodsA spatial IBM containing An. gambiae mosquitoes and humans, as well as the village environment of houses, sugar sources, resting sites and larval habitat sites was developed. Anopheles gambiae behaviour rules were attributed at each step of the IBM: resting, host seeking, sugar feeding and breeding. Each step represented one second of time, and each simulation was set to run for 60 days and repeated 50 times. Scenarios of different densities and spatial distributions of sugar sources and outdoor resting sites were simulated and compared.ResultsWhen the number of natural sugar sources was increased from 0 to 100 while the number of resting sites was held constant, mean daily survival rate increased from 2.5% to 85.1% for males and from 2.5% to 94.5% for females, mean human biting rate increased from 0 to 0.94 bites per human per day, and mean daily abundance increased from 1 to 477 for males and from 1 to 1,428 for females. When the number of outdoor resting sites was increased from 0 to 50 while the number of sugar sources was held constant, mean daily survival rate increased from 77.3% to 84.3% for males and from 86.7% to 93.9% for females, mean human biting rate increased from 0 to 0.52 bites per human per day, and mean daily abundance increased from 62 to 349 for males and from 257 to 1120 for females. All increases were significant (P < 0.01). Survival was greater when sugar sources were randomly distributed in the whole village compared to clustering around outdoor resting sites or houses.ConclusionsIncreases in densities of sugar sources or outdoor resting sites significantly increase the survival and human biting rates of An. gambiae mosquitoes. Survival of An. gambiae is more supported by random distribution of sugar sources than clustering of sugar sources around resting sites or houses. Density and spatial distribution of natural sugar sources and outdoor resting sites modulate vector populations and human biting rates, and thus malaria parasite transmission.
Zhu, Lin; Qualls, Whitney A; Marshall, John M; Arheart, Kris L; DeAngelis, Donald L; McManus, John W; Traore, Sekou F; Doumbia, Seydou; Schlein, Yosef; Müller, Günter C; Beier, John C
2015-02-05
Agent-based modelling (ABM) has been used to simulate mosquito life cycles and to evaluate vector control applications. However, most models lack sugar-feeding and resting behaviours or are based on mathematical equations lacking individual level randomness and spatial components of mosquito life. Here, a spatial individual-based model (IBM) incorporating sugar-feeding and resting behaviours of the malaria vector Anopheles gambiae was developed to estimate the impact of environmental sugar sources and resting sites on survival and biting behaviour. A spatial IBM containing An. gambiae mosquitoes and humans, as well as the village environment of houses, sugar sources, resting sites and larval habitat sites was developed. Anopheles gambiae behaviour rules were attributed at each step of the IBM: resting, host seeking, sugar feeding and breeding. Each step represented one second of time, and each simulation was set to run for 60 days and repeated 50 times. Scenarios of different densities and spatial distributions of sugar sources and outdoor resting sites were simulated and compared. When the number of natural sugar sources was increased from 0 to 100 while the number of resting sites was held constant, mean daily survival rate increased from 2.5% to 85.1% for males and from 2.5% to 94.5% for females, mean human biting rate increased from 0 to 0.94 bites per human per day, and mean daily abundance increased from 1 to 477 for males and from 1 to 1,428 for females. When the number of outdoor resting sites was increased from 0 to 50 while the number of sugar sources was held constant, mean daily survival rate increased from 77.3% to 84.3% for males and from 86.7% to 93.9% for females, mean human biting rate increased from 0 to 0.52 bites per human per day, and mean daily abundance increased from 62 to 349 for males and from 257 to 1120 for females. All increases were significant (P < 0.01). Survival was greater when sugar sources were randomly distributed in the whole village compared to clustering around outdoor resting sites or houses. Increases in densities of sugar sources or outdoor resting sites significantly increase the survival and human biting rates of An. gambiae mosquitoes. Survival of An. gambiae is more supported by random distribution of sugar sources than clustering of sugar sources around resting sites or houses. Density and spatial distribution of natural sugar sources and outdoor resting sites modulate vector populations and human biting rates, and thus malaria parasite transmission.
Disinfection effect of non-thermal atmospheric pressure plasma for foodborne bacteria
NASA Astrophysics Data System (ADS)
Pervez, Mohammad Rasel; Inomata, Takanori; Ishijima, Tatsuo; Kakikawa, Makiko; Uesugi, Yoshihiko; Tanaka, Yasunori; Yano, Toshihiro; Miwa, Shoji; Noguchi, Akinori
2015-09-01
Non-thermal atmospheric pressure plasma (NAPP) exposure can be a suitable alternative for bacteria inactivation in food processing industry. Specimen placed in the enclosure are exposed to various reactive radicals produced within the discharge chamber. It is also exposed to the periodic variation of the electric field strength in the chamber. Dielectric barrier discharge is produced by high voltage pulse (Vpp = 18 kV, pulse width 20 μs, repetition frequency 10 kHz) in a polypropylene box (volume = 350 cm3) using helium as main feed gas. Inactivation efficiency of NAPP depends on the duration of NAPP exposure, applied voltage pulse strength and type, pulse duration, electrode separation and feed gas composition. In this study we have investigated inactivation of Bacillus lichenformis spore as an example of food borne bacteria. Keeping applied voltage, electrode configuration and total gas flow rate constant, spores are exposed to direct NAPP for different time duration while O2 concentration in the feed gas composition is varied. 10 minutes NAPP exposure resulted in ~ 3 log reduction of Bacillus lichenformis spores for 1% O2concentration (initial concentration ~ 106 / specimen). This work is supported by research and development promotion grant provided by the Hokuriku Industrial Advancement Center.
NASA Astrophysics Data System (ADS)
Mia, Mozammel; Bashir, Mahmood Al; Dhar, Nikhil Ranjan
2016-07-01
Hard turning is gradually replacing the time consuming conventional turning process, which is typically followed by grinding, by producing surface quality compatible to grinding. The hard turned surface roughness depends on the cutting parameters, machining environments and tool insert configurations. In this article the variation of the surface roughness of the produced surfaces with the changes in tool insert configuration, use of coolant and different cutting parameters (cutting speed, feed rate) has been investigated. This investigation was performed in machining AISI 1060 steel, hardened to 56 HRC by heat treatment, using coated carbide inserts under two different machining environments. The depth of cut, fluid pressure and material hardness were kept constant. The Design of Experiment (DOE) was performed to determine the number and combination sets of different cutting parameters. A full factorial analysis has been performed to examine the effect of main factors as well as interaction effect of factors on surface roughness. A statistical analysis of variance (ANOVA) was employed to determine the combined effect of cutting parameters, environment and tool configuration. The result of this analysis reveals that environment has the most significant impact on surface roughness followed by feed rate and tool configuration respectively.
NASA Technical Reports Server (NTRS)
Reysa, R. P.; Price, D. F.; Olcott, T.; Gaddis, J. L.
1983-01-01
The Hyperfiltration Wash Water Recovery (HWWR) subsystem, designed to offer low-power high-volume wash water purification for extended mission spacecraft, is discussed in terms of preprototype design and configuration. Heated wash water collected from the shower, hand wash, and laundry flows into a temperature-controlled (374 K) waste storage tank. Two parallel 25 micron absolute filters at the tank outlet remove large particles from the feed stream. A positive displacement feed pump delivers wash water to the hyperfiltration module at a constant flow rate of 0.20 lpm with discharge pressure variations from 4181-7239 Kpa. The hyperfiltration membrane module is a single-pass design including 36 porous stainless steel tubes, and is designed to provide an approximate water recovery rate of 90 percent. Permeate and brine water flows are monitored by flow meters, and removal of urea and ammonia is achieved by adding 15 percent NaOCl solution to the permeate fluid stream. An alternate module design using two diameters of tubing (allowing a smaller pressure drop and a larger membrane area) gave a superior predicted performance over the first module with larger tubing throughout.
Chan, Man Yi; Ip, Wan Yim; Choi, Kai Chow
2016-05-01
breast feeding has a number of well-documented benefits. Numerous studies have been conducted to investigate an effective approach to increase the breast feeding rate, duration and exclusive breast feeding rate, in which maternal breast feeding self-efficacy was determined as one of the major contributors. Although numerous breast feeding educational programmes have been developed to enhance maternal breastfeeding self-efficacy, results on the effectiveness of these programmes remain inconclusive. this study aims to investigate the effectiveness of a self-efficacy-based breast feeding educational programme (SEBEP) in enhancing breast feeding self-efficacy, breast feeding duration and exclusive breast feeding rates among mothers in Hong Kong. eligible pregnant women were randomized to attend a 2.5-hour breast feeding workshop at 28-38 weeks of gestation and receive 30-60minutes of telephone counselling at two weeks post partum, whereas both intervention and control groups received usual care. At two weeks postpartum, the Breast feeding Self-Efficacy Scale-Short Form (BSES-SF) and a self-developed post partum questionnaire were completed via telephone interviews. The breast feeding duration, pattern of breast feeding and exclusive breast feeding rates were recorded at two weeks, four weeks, eight weeks and six months post partum. results of analyses based on an intention-to-treat (ITT) assumption showed a significant difference (p<0.01) in the change in BSES-SF mean scores between the mothers who received SEBEP and those who did not receive SEBEP at two weeks post partum. The exclusive breast feeding rate was 11.4% for the intervention group and 5.6% for the control group at six months post partum. the findings of this study highlight the feasibility of a major trial to implement breast feeding education targeted at increasing breast feeding self-efficacy and exclusive breast feeding rates in Hong Kong. Copyright © 2016 Elsevier Ltd. All rights reserved.
Taylor, Anna M.; Heflin, Laura E.; Powell, Mickie L.; Lawrence, Addison L.; Watts, Stephen A.
2015-01-01
In experiment 1, juvenile sea urchins (n = 80, 0.088 ± 0.001 g wet weight and 5.72 ± 0.04 mm diameter) were held individually and fed ad libitum one of three semi-purified formulated diets (n = 16 individuals treatment-1). In the diets, protein was held constant (310g kg-1 dry, as fed) and carbohydrate level varied (190, 260, or 380 g kg-1 dry, as fed). Wet weights were measured every 2 weeks. Total wet weight gain was inversely proportional to dietary carbohydrate level and energy content of the respective diet. In experiment 2, sea urchins (5.60 ± 0.48g wet weight, n= 40) fed 190 g kg-1 carbohydrate consumed significantly more dry feed than those fed 260 g kg-1, but not more than those fed 380 g kg-1 carbohydrate. Based on differential feed intake rates, sea urchins that consumed more feed also consumed higher levels of protein and had the highest weight gain. Consequently, protein content and/or protein: energy ratio may be important in determining feed utilization and growth among sea urchins in this study. The average digestible energy intake was approximately 70 kcal kg-1 body weight day-1, suggesting daily caloric intake of juvenile Lytechinus variegatus is lower than in shrimp and fish. PMID:28479861
Patra, Nivedita; Srivastava, Ashok K
2015-09-01
Artemisinin has been indicated to be a potent drug for the cure of malaria. Batch growth and artemisinin production kinetics of hairy root cultures of Artemisia annua were studied under shake flask conditions which resulted in accumulation of 12.49 g/L biomass and 0.27 mg/g artemisinin. Using the kinetic data, a mathematical model was identified to understand and optimize the system behavior. The developed model was then extrapolated to design nutrient feeding strategies during fed-batch cultivation for enhanced production of artemisinin. In one of the fed-batch cultivation, sucrose (37 g/L) feeding was done at a constant feed rate of 0.1 L/day during 10-15 days, which led to improved artemisinin accumulation of 0.77 mg/g. The second strategy of fed-batch hairy root cultivation involved maintenance of pseudo-steady state sucrose concentration (20.8 g/L) during 10-15 days which resulted in artemisinin accumulation of 0.99 mg/g. Fed-batch cultivation (with the maintenance of pseudo-steady state of substrate) of Artemisia annua hairy roots was, thereafter, implemented in bioreactor cultivation, which featured artemisinin accumulation of 1.0 mg/g artemisinin in 16 days of cultivation. This is the highest reported artemisinin yield by hairy root cultivation in a bioreactor.
NASA Astrophysics Data System (ADS)
Leonardi, Marco; Nasuti, Francesco; Di Matteo, Francesco; Steelant, Johan
2017-10-01
An investigation on the low frequency combustion instabilities due to the interaction of combustion chamber and feed line dynamics in a liquid rocket engine is carried out implementing a specific module in the system analysis software EcosimPro. The properties of the selected double time lag model are identified according to the two classical assumptions of constant and variable time lag. Module capabilities are evaluated on a literature experimental set up consisting of a combustion chamber decoupled from the upstream feed lines. The computed stability map results to be in good agreement with both experimental data and analytical models. Moreover, the first characteristic frequency of the engine is correctly predicted, giving confidence on the use of the module for the analysis of chugging instabilities. As an example of application, a study is carried out on the influence of the feed lines on the system stability, correctly capturing that the lines extend the stable regime of the combustion chamber and that the propellant domes play a key role in coupling the dynamics of combustion chamber and feed lines. A further example is presented to discuss on the role of pressure growth rate and of the combustion chamber properties on the possible occurrence of chug instability during engine start-up and on the conditions that lead to its damping or growth.
Evaluation of an anaerobic digestion system for processing CELSS crop residues for resource recovery
NASA Astrophysics Data System (ADS)
Strayer, R. F.; Finger, B. W.; Alazraki, M. P.
1997-01-01
Three bioreactors, connected in series, were used to process CELSS potato residues for recovery of resources. The first stage was an anaerobic digestor (8 L working volume; cow rumen contents inoculum; fed-batch; 8 day retention time; feed rate 25 gdw day^-1) that converted 33% of feed (dry weight loss) to CO_2 and ``volatile fatty acids'' (vfa, 83:8:8 mmolar ratio acetic:propionic:butyric). High nitrate-N in the potato residue feed was absent in the anaerobic effluent, with a high portion converted to NH_4^+-N and the remainder unaccounted and probably lost to denitrification and NH_4^+ volatilization. Liquid anaerobic effluent was fed to an aerobic, yeast biomass production vessel (2 L volume; Candida ingens inoculum; batch [pellicle] growth; 2 day retention time) where the VFAs and some NH_4^+-N were converted into yeast biomass. Yeast yields accounted for up to 8% of potato residue fed into the anaerobic bioreactor. The third bioreactor (0.5 L liquid working volume; commercial nitrifier inoculum; packed-bed biofilm; continuous yeast effluent feed; recirculating; constant volume; 2 day hydraulic retention time) was used to convert successfully the remaining NH_4^+-N into nitrate-N (preferred form of N for CELSS crop production) and to remove the remaining degradable soluble organic carbon. Effluents from the last two stages were used for partial replenishment of minerals for hydroponic potato production.
Evaluation of an Anaerobic Digestion System for Processing CELSS Crop Residues for Resource Recovery
NASA Technical Reports Server (NTRS)
Strayer, R. F.; Finger, B. W.; Alazraki, M. P.
1997-01-01
Three bioreactors, connected in series, were used to process CELSS potato residues for recovery of resources. The first stage was an anaerobic digestor (8 L working volume; cow rumen contents inoculum; fed-batch; 8 day retention time; feed rate 25 gdw/day) that converted 33% of feed (dry weight loss) to CO2 and "volatile fatty acids" (vfa, 83:8:8 mmolar ratio acetic:propionic:butyric). High nitrate-N in the potato residue feed was absent in the anaerobic effluent, with a high portion converted to NH4(+)-N and the remainder unaccounted and probably lost to denitrification and NH4(+) volatilization. Liquid anaerobic effluent was fed to an aerobic, yeast biomass production vessel (2 L volume; Candida ingens inoculum; batch [pellicle] growth; 2 day retention time) where the VFAs and some NH4(+)-N were converted into yeast biomass. Yeast yields accounted for up to 8% of potato residue fed into the anaerobic bioreactor. The third bioreactor (0.5 L liquid working volume; commercial nitrifier inoculum; packed-bed biofilm; continuous yeast effluent feed; recirculating; constant volume; 2 day hydraulic retention time) was used to convert successfully the remaining NH4(+)-N into nitrate-N (preferred form of N for CELSS crop production) and to remove the remaining degradable soluble organic carbon. Effluents from the last two stages were used for partial replenishment of minerals for hydroponic potato production.
A data acquisition system for coincidence imaging using a conventional dual head gamma camera
NASA Astrophysics Data System (ADS)
Lewellen, T. K.; Miyaoka, R. S.; Jansen, F.; Kaplan, M. S.
1997-06-01
A low cost data acquisition system (DAS) was developed to acquire coincidence data from an unmodified General Electric Maxxus dual head scintillation camera. A high impedance pick-off circuit provides position and energy signals to the DAS without interfering with normal camera operation. The signals are pulse-clipped to reduce pileup effects. Coincidence is determined with fast timing signals derived from constant fraction discriminators. A charge-integrating FERA 16 channel ADC feeds position and energy data to two CAMAC FERA memories operated as ping-pong buffers. A Macintosh PowerPC running Labview controls the system and reads the CAMAC memories. A CAMAC 12-channel scaler records singles and coincidence rate data. The system dead-time is approximately 10% at a coincidence rate of 4.0 kHz.
NASA Astrophysics Data System (ADS)
Bashir, K.; Alkali, A. U.; Elmunafi, M. H. S.; Yusof, N. M.
2018-04-01
Recent trend in turning hardened materials have gained popularity because of its immense machinability benefits. However, several machining processes like thermal assisted machining and cryogenic machining have reveal superior machinability benefits over conventional dry turning of hardened materials. Various engineering materials have been studied. However, investigations on AISI O1 tool steel have not been widely reported. In this paper, surface finish and surface integrity dominant when hard turning AISI O1 tool steel is analysed. The study is focused on the performance of wiper coated ceramic tool with respect to surface roughness and surface integrity of hardened tool steel. Hard turned tool steel was machined at varying cutting speed of 100, 155 and 210 m/min and feed rate of 0.05, 0.125 and 0.20mm/rev. The depth of cut of 0.2mm was maintained constant throughout the machining trials. Machining was conducted using dry turning on 200E-axis CNC lathe. The experimental study revealed that the surface finish is relatively superior at higher cutting speed of 210m/min. The surface finish increases when cutting speed increases whereas surface finish is generally better at lower feed rate of 0.05mm/rev. The experimental study conducted have revealed that phenomena such as work piece vibration due to poor or improper mounting on the spindle also contributed to higher surface roughness value of 0.66Ra during turning at 0.2mm/rev. Traces of white layer was observed when viewed with optical microscope which shows evidence of cutting effects on the turned work material at feed rate of 0.2 rev/min
Wood, Chris M; de Souza Netto, José Gadelha; Wilson, Jonathan M; Duarte, Rafael M; Val, Adalberto Luis
2017-01-01
The total rate of N-waste excretion (M N ) in juvenile tambaqui living in ion-poor Amazonian water comprised 85 % ammonia-N (M Amm-N ) and 15 % urea-N (M Urea-N ). Both occurred mainly across the gills with only ~5 % of M Amm-N and ~39 % of M Urea-N via the urine. Tambaqui were not especially tolerant to high environmental ammonia (HEA), despite their great resistance to other environmental factors. Nevertheless, they were able to maintain a continued elevation of M Amm-N during and after 48-h exposure to 2.5 mmol L -1 HEA. The normally negative transepithelial potential (-18 mV) increased to -9 mV during the HEA period, which would help to reduce branchial NH 4 + entry. During 3 h of acute environmental hypoxia (30 % saturation), M Amm-N declined, and recovered thereafter, similar to the response seen in other hypoxia-tolerant teleosts; M Urea-N did not change. However, during gradual hypoxia, M Amm-N remained constant, but M Urea-N eventually fell. The acute temperature sensitivities of M Amm-N and M N were low from 28 °C (acclimation) to 33 °C (Q10 ~1.5), but high (~3.8) from 33 to 38 °C, relative to [Formula: see text] (~1.9 throughout). In contrast, M Urea-N exhibited a different pattern over these temperature ranges (Q10 2.6 and 2.1, respectively). The nitrogen quotient (NQ = 0.16-0.23) was high at all temperatures, indicating a 60-85 % reliance on protein to fuel aerobic metabolism in these fasting animals. During steady-state aerobic exercise, [Formula: see text] and M Urea-N increased in parallel with velocity (up to 3.45 body lengths s -1 ), but M Amm (and thus M N ) remained approximately constant. Therefore, the NQ fell progressively, indicating a decreasing reliance on protein-based fuels, as work load increased. In group feeding trials using 45 % protein commercial pellets, tambaqui excreted 82 % (range 39-170 %) of the dietary N within 24 h; N-retention efficiency was inversely related to the ration voluntarily consumed. M Amm-N peaked at 4-6 h, and M Urea-N at 6-9-h post-feeding, with an additional peak in M Amm-N only at 21 h. During subsequent fasting, M N stabilized at a high endogenous rate from 2 through 8 days post-feeding. Possible reasons for the high wasting of protein-N during both fasting and feeding are discussed.
Constant pressure high throughput membrane permeation testing system
Albenze, Erik J.; Hopkinson, David P.; Luebke, David R.
2014-09-02
The disclosure relates to a membrane testing system for individual evaluation of a plurality of planar membranes subjected to a feed gas on one side and a sweep gas on a second side. The membrane testing system provides a pressurized flow of a feed and sweep gas to each membrane testing cell in a plurality of membrane testing cells while a stream of retentate gas from each membrane testing cell is ported by a retentate multiport valve for sampling or venting, and a stream of permeate gas from each membrane testing cell is ported by a permeate multiport valve for sampling or venting. Back pressure regulators and mass flow controllers act to maintain substantially equivalent gas pressures and flow rates on each side of the planar membrane throughout a sampling cycle. A digital controller may be utilized to position the retentate and permeate multiport valves cyclically, allowing for gas sampling of different membrane cells over an extended period of time.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ryan, Kathleen M.
1990-12-01
The effect of incubation temperature on the post-hatching growth and performance capacities of the common snapping turtle, Chelydra serpentina was investigated in the laboratory. Turtle eggs were collected from four sites in New York State and randomly assigned to four incubation temperature treatments to produce males (constant 26°C and downshifted 30-26-30°C) and females (constant 30°C and upshifted 26-30-26°C) under constant and altered temperature regimes. The incubation conditions resulted in 92% males from the constant 26°C group and 93% males from the downshifted group. 100% females resulted from both the constant 30°C group and the upshifted group. Turtles hatching from eggsmore » incubated constantly at 26°C were significantly larger than hatchlings from eggs incubated at a constant 30°C or downshifted. Hatchlings were raised in individual aquaria at 25°C and fed earthworms and fish. After a 9-month growth period, turtles which had been incubated at a constant 30°C gained significantly more mass than did turtles from eggs which had been downshifted or upshifted. There was no extended effect of incubation condition on Post-hatching performance and learning ability as measured by righting and feeding responses. Thus, the mass gain differences seen in this study suggest that physiological differences do result as the consequence of incubation condition. However, these physiological differences are not reflected in normal locomotive or feeding behavior.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ryan, K.M.
1990-12-01
The effect of incubation temperature on the post-hatching growth and performance capacities of the common snapping turtle, Chelydra serpentina was investigated in the laboratory. Turtle eggs were collected from four sites in New York State and randomly assigned to four incubation temperature treatments to produce males (constant 26[degree]C and downshifted 30-26-30[degree]C) and females (constant 30[degree]C and upshifted 26-30-26[degree]C) under constant and altered temperature regimes. The incubation conditions resulted in 92% males from the constant 26[degree]C group and 93% males from the downshifted group. 100% females resulted from both the constant 30[degree]C group and the upshifted group. Turtles hatching from eggsmore » incubated constantly at 26[degree]C were significantly larger than hatchlings from eggs incubated at a constant 30[degree]C or downshifted. Hatchlings were raised in individual aquaria at 25[degree]C and fed earthworms and fish. After a 9-month growth period, turtles which had been incubated at a constant 30[degree]C gained significantly more mass than did turtles from eggs which had been downshifted or upshifted. There was no extended effect of incubation condition on Post-hatching performance and learning ability as measured by righting and feeding responses. Thus, the mass gain differences seen in this study suggest that physiological differences do result as the consequence of incubation condition. However, these physiological differences are not reflected in normal locomotive or feeding behavior.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
KRUGER AA; MATLACK KS; PEGG IL
2011-12-29
Eight tests using different HLW feeds were conducted on the DM100-BL to determine the effect of variations in glass properties and feed composition on processing rates and melter conditions (off-gas characteristics, glass processing, foaming, cold cap, etc.) at constant bubbling rate. In over seven hundred hours of testing, the property extremes of glass viscosity, electrical conductivity, and T{sub 1%}, as well as minimum and maximum concentrations of several major and minor glass components were evaluated using glass compositions that have been tested previously at the crucible scale. Other parameters evaluated with respect to glass processing properties were +/-15% batching errorsmore » in the addition of glass forming chemicals (GFCs) to the feed, and variation in the sources of boron and sodium used in the GFCs. Tests evaluating batching errors and GFC source employed variations on the HLW98-86 formulation (a glass composition formulated for HLW C-106/AY-102 waste and processed in several previous melter tests) in order to best isolate the effect of each test variable. These tests are outlined in a Test Plan that was prepared in response to the Test Specification for this work. The present report provides summary level data for all of the tests in the first test matrix (Matrix 1) in the Test Plan. Summary results from the remaining tests, investigating minimum and maximum concentrations of major and minor glass components employing variations on the HLW98-86 formulation and glasses generated by the HLW glass formulation algorithm, will be reported separately after those tests are completed. The test data summarized herein include glass production rates, the type and amount of feed used, a variety of measured melter parameters including temperatures and electrode power, feed sample analysis, measured glass properties, and gaseous emissions rates. More detailed information and analysis from the melter tests with complete emission chemistry, glass durability, and melter operating details will be provided in the final report. A summary of the tests that were conducted is provided in Table 1. Each of the seven tests was of nominally one hundred hours in duration. Test B was conducted in two equal segments: the first with nominal additives, and the second with the replacement of borax with a mixture of boric acid and soda ash to determine the effect of alternative OPC sources on production rates and processing characteristics. Interestingly, sugar additions were required near mid points of Tests W and Z to reduce excessive foaming that severely limited feed processing rates. The sugar additions were very effective in recovering manageable processing conditions, albeit over the relatively short remainder of the test duration. Tests W and Z employed the highest melt viscosities but not by a particularly wide margin. Other tests, which did not exhibit such foaming Issues, employed higher concentrations of manganese or iron or both. These results highlight the need for the development of protocols for the a priori determination of which HLW feeds will require sugar additions and the appropriate amounts of sugar to be added in order to control foaming (and maintain throughput) without over-reduction of the melt (which could lead to molten metal formation). In total, over 8,800 kg of feed was processed to produce over 3200 kg of glass. Steady-state processing rates were achieved, and no secondary sulfate phases were observed during any of the tests. Analysis was performed on samples of the glass product taken throughout the tests to verify composition and properties. Sampling and analysis was also performed on melter exhaust to determine the effect of the feed and glass changes on melter emissions.« less
Effect of light, prey density, and prey type on the feeding rates of Hemimysis anomala
Halpin, Kathleen E.; Boscarino, Brent T.; Rudstam, Lars G.; Walsh, Mureen G.; Lantry, Brian F.
2013-01-01
Hemimysis anomala is a near-shore mysid native to the Ponto-Caspian region that was discovered to have invaded Great Lakes ecosystems in 2006. We investigated feeding rates and prey preferences of adult and juvenile Hemimysis in laboratory experiments to gain insight on the potential for Hemimysis to disrupt food webs. For both age groups (AGs), we measured feeding rates as a function of prey abundance (Bosmina longirostris as prey), prey type (B. longirostris, Daphnia pulex, and Mesocyclops sp.), and light levels (no light and dim light). Mean feeding rates on Bosmina increased with prey density and reached 23 ind. (2 h)−1 for adults and 17 ind. (2 h)−1 for juveniles. Dim light had little effect on prey selection or feeding rate compared to complete darkness. When feeding rates on alternate prey were compared, both AGs fed at higher rates on Bosmina than Daphnia, but only juveniles fed at significantly higher rates on Bosmina relative to Mesocyclops. No significant differences were observed between feeding rates on Mesocyclops and on Daphnia. Hemimysis feeding rates were on the order of 30–60% of their body weight per day, similar to predatory cladocerans that have been implicated in zooplankton declines in Lakes Huron and Ontario.
Laboratory evaluation of predation on mosquito larvae by Australian mangrove fish.
Griffin, Lachlan
2014-06-01
A series of laboratory experiments compared predation rates of three native eastern Australian mangrove fish species (Psuedomugil signifer, Hyseleotris galii, Pseudogobius sp.) and the exotic Gambusia holbrooki on 2nd and 4th instar Aedes vigilax larvae, in order to determine their potential as mosquito control agents in mangrove forests. All four species preyed on significant numbers of both 2nd and 4th instar larvae. All showed a similar pattern of larval consumption, gorging on larvae in the first hour of each experiment, before reducing to a relatively constant background feeding rate. Gambusia holbrooki showed the highest larval consumption rates, but is unsuitable as a mosquito control agent due to it being an exotic pest species in Australia. Of the three native species, P. signifer showed the greatest potential as a mosquito control agent, having consumption rates comparable to G. holbrooki, and was the only species that did not show a significant reduction in larval consumption in the night experiments. © 2014 The Society for Vector Ecology.
Jewish and Celtic attitudes to breast feeding compared.
Ineichen, B; Pierce, M; Lawrenson, R
1997-03-01
To examine reasons for the high rate of breast feeding among one UK ethnic group (Jews) and the low rate among Celtic (Scots and Irish) populations. A manual literature search of ethnic variation in breast feeding rates in the UK was conducted over several years. A computerised search yielded 31 additional references. Seven of these were added. Positive Jewish attitudes to breast feeding were underpinned by scriptural references, and rates of breast feeding were found to be especially high among Orthodox samples in the UK and Israel. Low Scottish and Irish rates appear to reflect prudishness, fashion, and possibly poor health. Reasons for falling rates among these populations in the twentieth century were not clear. Health education needs to address cultural attitudes throughout society if effective change is to be introduced, and the overall rate of breast feeding is to be increased.
Bioprinted chitosan-gelatin thermosensitive hydrogels using an inexpensive 3D printer.
Roehm, Kevin D; Madihally, Sundararajan V
2017-11-30
The primary bottleneck in bioprinting cell-laden structures with carefully controlled spatial relation is a lack of biocompatible inks and printing conditions. In this regard, we explored using thermogelling chitosan-gelatin (CG) hydrogel as a novel bioprinting ink; CG hydrogels are unique in that it undergoes a spontaneous phase change at physiological temperature, and does not need post-processing. In addition, we used a low cost (<$800) compact 3D printer, and modified with a new extruder to print using disposable syringes and hypodermic needles. We investigated (i) the effect of concentration of CG on gelation characteristics, (ii) solution preparation steps (centrifugation, mixing, and degassing) on printability and fiber formation, (iii) the print bed temperature profiles via IR imaging and grid-based assessment using thermocouples, (iv) the effect of feed rate (10-480 cm min -1 ), flow rate (15-60 μl min -1 ) and needle height (70-280 μm) on fiber size and characteristics, and (v) the distribution of neuroblastoma cells in printed fibers, and the viability after five days in culture. We used agarose gel to create uniform print surfaces to maintain a constant gap with the needle tip. These results showed that degassing the solution, and precooling the solution was necessary for obtaining continuous fibers. Fiber size decreased from 760, to 243 μm as the feed rate increased from 10 to 100 cm min -1 . Bed temperature played the greatest role in fiber size, followed by feed rate. Increased needle height initially decreased fiber size but then increased showing an optimum. Cells were well distributed within the fibers and exhibited excellent viability and no contamination after 5 d. Overall we printed 3D, sterile, cell-laden structures with an inexpensive bioprinter and a novel ink, without post-processing. The bioprinter described here and the novel CG hydrogels have significant potential as an ink for bioprinitng various cell-laden structures.
Water balance in irrigation districts. Uncertainty in on-demand pressurized networks
NASA Astrophysics Data System (ADS)
Sánchez-Calvo, Raúl; Rodríguez-Sinobas, Leonor; Juana, Luis; Laguna, Francisco Vicente
2015-04-01
In on-demand pressurized irrigation distribution networks, applied water volume is usually controlled opening a valve during a calculated time interval, and assuming constant flow rate. In general, pressure regulating devices for controlling the discharged flow rate by irrigation units are needed due to the variability of pressure conditions. A pressure regulating valve PRV is the commonly used pressure regulating device in a hydrant, which, also, executes the open and close function. A hydrant feeds several irrigation units, requiring a wide range in flow rate. In addition, some flow meters are also available, one as a component of the hydrant and the rest are placed downstream. Every land owner has one flow meter for each group of field plots downstream the hydrant. Ideal PRV performance would maintain a constant downstream pressure. However, the true performance depends on both upstream pressure and the discharged flow rate. Theoretical flow rates values have been introduced into a PRV behavioral model, validated in laboratory, coupled with an on-demand irrigation district waterworks, composed by a distribution network and a multi-pump station. Variations on flow rate are simulated by taking into account the consequences of variations on climate conditions and also decisions in irrigation operation, such us duration and frequency application. The model comprises continuity, dynamic and energy equations of the components of both the PRV and the water distribution network. In this work the estimation of water balance terms during the irrigation events in an irrigation campaign has been simulated. The effect of demand concentration peaks has been estimated.
Micro-feeding and dosing of powders via a small-scale powder pump.
Besenhard, M O; Fathollahi, S; Siegmann, E; Slama, E; Faulhammer, E; Khinast, J G
2017-03-15
Robust and accurate powder micro-feeding (<100mg/s) and micro-dosing (<5 mg) are major challenges, especially with regard to regulatory limitations applicable to pharmaceutical development and production. Since known micro-feeders that yield feed rates below 5mg/s use gravimetric feeding principles, feed rates depend primarily on powder properties. In contrast, volumetric powder feeders do not require regular calibration because their feed rates are primarily determined by the feeder's characteristic volume replacement. In this paper, we present a volumetric micro-feeder based on a cylinder piston system (i.e., a powder pump), which allows accurate micro-feeding and feed rates of a few grams per hours even for very fine powders. Our experimental studies addressed the influence of cylinder geometries, the initial conditions of bulk powder, and the piston speeds. Additional computational studies via Discrete Element Method simulations offered a better understanding of the feeding process, its possible limitations and ways to overcome them. The powder pump is a simple yet valuable tool for accurate powder feeding at feed rates of several orders of magnitude. Copyright © 2016 Elsevier B.V. All rights reserved.
NASA Astrophysics Data System (ADS)
Ulum, M. M.; Zubaidah, M.; Arief, M.; Prayogo
2018-04-01
Catfish (Clarias sp.) is very potential to be developed as a food fish. The use of the feed additive in feed intended to improve the health, productivity and compliance with animal nutrition. Feed additive is to use ginger are derived from nature.The purpose of this study was to determine the potential increase in feed formulation. The Curcuma effect on growth rate and feed efficiency of catfish (Clarias sp.). The method used experimental methods and design complete random with 4 treatments and 5 replications. The parameters examined in this study aregrowth rate and efficiency feed.The research showed that the ANOVA markedly dissimilar ( P< 0.05 ) against growth rate and efficiency feed catfishes. The average is 0.275 - 0.33 growth and the results efficiency feed catfishes of 60.70 % - 73.10 % and the results obtained temperature water quality around 27-30°C, pH 7-8, and DO 3.09-6.4. Based on this research cultivator of the suggested use flour curcuma as feed additive on formulations feed.
Gürtler, Ricardo E; Cecere, María C; Vázquez-Prokopec, Gonzalo M; Ceballos, Leonardo A; Gurevitz, Juan M; Fernández, María Del Pilar; Kitron, Uriel; Cohen, Joel E
2014-01-01
The host species composition in a household and their relative availability affect the host-feeding choices of blood-sucking insects and parasite transmission risks. We investigated four hypotheses regarding factors that affect blood-feeding rates, proportion of human-fed bugs (human blood index), and daily human-feeding rates of Triatoma infestans, the main vector of Chagas disease. A cross-sectional survey collected triatomines in human sleeping quarters (domiciles) of 49 of 270 rural houses in northwestern Argentina. We developed an improved way of estimating the human-feeding rate of domestic T. infestans populations. We fitted generalized linear mixed-effects models to a global model with six explanatory variables (chicken blood index, dog blood index, bug stage, numbers of human residents, bug abundance, and maximum temperature during the night preceding bug catch) and three response variables (daily blood-feeding rate, human blood index, and daily human-feeding rate). Coefficients were estimated via multimodel inference with model averaging. Median blood-feeding intervals per late-stage bug were 4.1 days, with large variations among households. The main bloodmeal sources were humans (68%), chickens (22%), and dogs (9%). Blood-feeding rates decreased with increases in the chicken blood index. Both the human blood index and daily human-feeding rate decreased substantially with increasing proportions of chicken- or dog-fed bugs, or the presence of chickens indoors. Improved calculations estimated the mean daily human-feeding rate per late-stage bug at 0.231 (95% confidence interval, 0.157-0.305). Based on the changing availability of chickens in domiciles during spring-summer and the much larger infectivity of dogs compared with humans, we infer that the net effects of chickens in the presence of transmission-competent hosts may be more adequately described by zoopotentiation than by zooprophylaxis. Domestic animals in domiciles profoundly affect the host-feeding choices, human-vector contact rates and parasite transmission predicted by a model based on these estimates.
Oxygen saturation and heart rate during feeding in breast-fed infants at 1 week and 2 months of age.
Suiter, Debra M; Ruark-McMurtrey, Jacki
2007-12-01
To gather normative data about cardiopulmonary changes during feeding in breast-fed infants at 1 week and 2 months of age. Prospective cohort study. General community. Twenty-two term-born, breast-fed infants. Not applicable. Oxygen saturation (SpO2), the percentage of oxygenized hemoglobin, and heart rate were monitored and recorded every 30 seconds for 5 minutes before oral feeding, during the first 10 minutes of feeding, and the first 10 minutes immediately after feeding. The observations were made at 1 week and 2 months of age. Mean SpO2 levels were significantly higher in 2-month-old infants (mean, 97.57) than in 1-week-old infants (mean, 96.35) (P=.001). SpO2 was not affected by any of the 3 trials (before, during, and after feeding). Heart rate was significantly affected by trial. Mean heart rate during feeding (mean, 152.45) was significantly higher than heart rate prefeeding (mean, 146.51) (P<.001), and heart rate postfeeding (mean, 147.12) (P=.002). Heart rate was not affected by age. Little is known about the association between feeding and cardiopulmonary status in term-born, breast-fed infants. This longitudinal study contributes to our knowledge about feeding-related cardiopulmonary changes in term-born, breast-fed infants.
Novel insights into iron regulation and requirement in marine medaka Oryzias melastigma
NASA Astrophysics Data System (ADS)
Wang, Jian; Wang, Wen-Xiong
2016-05-01
Iron (Fe) is an essential trace element for marine fish. However, our knowledge of Fe requirements at different development stages of marine fish is still limited. Here, we reported the efficient Fe absorption strategies adopted by larval fish under different dietary Fe supplementary levels (i.e., 0-640 mg/kg). Biokinetically, the larval fish controlled their dietary Fe assimilation efficiency (AE, 1.6-18.5%), and enhanced their waterborne Fe uptake (ca. 2.5 fold change of uptake rate constant) once the dietary Fe was deficient (i.e., 27.4 mg Fe/kg feed). Transcriptionally, the expression of hepcidin1 (hep1; Fe regulator; i.e., 2.3-15.7 fold change) in larval fish was positively correlated with the Fe supplementary levels. Comparatively, the female adult fish were poor in assimilating the added Fe source (i.e., ferric form) with similar life-sustainable levels of Fe (i.e., 0.046-0.12 μg/g/d assimilated for Fe supplementary levels of 27.4, 162 and 657 mg Fe/kg feed). The overall feeding experiments suggested that dietary net Fe flux sufficient for the normal growth of larval medaka was 0.71-1.75 μg/g/d (i.e., 83.9 mg Fe/kg feed), consistent with the modeled value (i.e., 1.09-2.16 μg/g/d). In female adults, the estimated essential net Fe flux was 0.88-0.90 μg/g/d.
The Effects of Antifoam Agent on Dead End Filtration Process
NASA Astrophysics Data System (ADS)
Mohamad Pauzi, S.; Ahmad, N.; Yahya, M. F.; Arifin, M. A.
2018-05-01
The formation of foam as a result from introducing gases during cell culture process in the bioprocess industry has indirectly affected the throughput of the product of interest. Due to that, antifoams were developed and established as one of the means to minimize the formation of foam in the cell culture. There are many types of antifoams but the silicone-type of antifoams are widely used in the bioprocess industry. Although the establishment of antifoam has aided the cell culture process, the impacts of its presence in the cell culture to the downstream process especially the dead end filtration is not widely discussed. The findings in the study emphasized on the dead end filtration performance that includes flux rate profile and the resulted filtration capacity. In this study, the concentrations of antifoam injected into the solution were varied from 0.2% v/v – 1.0% v/v and the solutions were filtered using constant flow method. The resulted maximum pressure readings and final flux rates indicated that the resistance exerted to the feed flow rate increased as the concentration of antifoam loaded in the solution increased. This later has led to the decline in the flux rates with percentage reduction between 32 – 68%. The calculated filter capacity for flux rate of 1000LMH ranged from 53 – 63L/m2 while it is in the range of 40 – 43L/m2 for flux rate of 2000LMH. The presence of antifoam agents in the feed load was determined to have negative effects on the dead end filtration performance and it may reduce the efficiency of the dead end filtration process.
Growth and development of male "little" mice assessed with Parks' theory of feeding and growth.
Puche, Rodolfo C; Alloatti, Rosa; Chapo, Gustavo
2002-01-01
This work was designed to characterize the appetite kinetics and growth of male C57BL/6J (lit) mice. Those variables were assessed with Parks' function of ad libitum feeding and growth. Heterozygous mice (lit/+) attained their mature weight at 12-15 weeks of age, peak growth rate (3.5 g/week) at 5 weeks and displayed the normal decay of food conversion efficiency as a function of age. The homozygous genotype has a chronic defect in the synthesis and secretion of growth hormone (GH). Homozygous mice could not be assessed with Park's function. From the 4th to the 15th week of age, body weight increased linearly and exhibited constant food conversion efficiency. Food intake of both genotypes was commensurate with their body weights. Lit/lit mice became progressively obese. At 40 weeks of age, body fat of lit/lit mice was fivefold that of lit/+ and their body weight was similar to their heterozygous controls. The chronic deficiency of growth hormone produced a lower bone mass (compared to heterozygous controls). Bone mass of both genotypes attained maturity at 12-15 weeks with a maximum growth rate at 5 weeks. Body weight and bone mass grow harmoniously in lit/+ but not in lit/lit mice.
Jang, Gun Ja; Lee, Sang Lak; Kim, Hyeon Mi
2012-04-01
This study was done to compare breast feeding rates and factors influencing feeding practice between late preterm (34 ≤ GA < 37) and preterm infants (GA<34). A survey was done of 207 late preterm and 117 preterm infants in neonatal intensive care units (NICU) of 4 university hospitals in D city. Data were collected from July 2009 to June 2010 from 324 medical records in the NICU. Breast-feeding at home was checked either by telephone survey or questioning during hospital visits. Rate of breast feeding for late preterm infants was significantly lower than for preterm infants. There was no significant difference in breast-feeding at home. We found differences in factors influencing breast feeding between the two groups. Factors influencing feeding for late preterm infants were type of delivery, mothers' occupation, feeding type during hospitalization, time elapse from hospital discharge, total admission days, infant's body weight at first feeding and length of NPO (nothing by mouth). Factors influencing feeding for preterm infants were birth order, maternal disease and obstetric complications, and one-minute Apgar score. Results of the study show low rates of breast-feeding for late preterm infants indicating a need for breast-feeding education for mothers of these infants.
Gao, Min-Jie; Zheng, Zhi-Yong; Wu, Jian-Rong; Dong, Shi-Juan; Li, Zhen; Jin, Hu; Zhan, Xiao-Bei; Lin, Chi-Chung
2012-02-01
Effective expression of porcine interferon-α (pIFN-α) with recombinant Pichia pastoris was conducted in a bench-scale fermentor. The influence of the glycerol feeding strategy on the specific growth rate and protein production was investigated. The traditional DO-stat feeding strategy led to very low cell growth rate resulting in low dry cell weight (DCW) of about 90 g/L during the subsequent induction phase. The previously reported Artificial Neural Network Pattern Recognition (ANNPR) model-based glycerol feeding strategy improved the cell density to 120 g DCW/L, while the specific growth rate decreased from 0.15 to 0.18 to 0.03-0.08 h(-1) during the last 10 h of the glycerol feeding stage leading to a variation of the porcine interferon-α production, as the glycerol feeding scheme had a significant effect on the induction phase. This problem was resolved by an improved ANNPR model-based feeding strategy to maintain the specific growth rate above 0.11 h(-1). With this feeding strategy, the pIFN-α concentration reached a level of 1.43 g/L, more than 1.5-fold higher than that obtained with the previously adopted feeding strategy. Our results showed that increasing the specific growth rate favored the target protein production and the glycerol feeding methods directly influenced the induction stage. Consequently, higher cell density and specific growth rate as well as effective porcine interferon-α production have been achieved by our novel glycerol feeding strategy.
Viscous constraints on predator:food size ratios in microscale feeding
NASA Astrophysics Data System (ADS)
Jabbarzadeh, Mehdi; Fu, Henry
2014-11-01
Small organisms such as protists or copepods may try to capture food by manipulating food with cilia, limbs, or feeding appendages. At these small scales, viscous flow may complicate the ability of a feeding appendage to closely approach a food particle. As a simplified but tractable model of such feeding approach, we consider the problem of two spheres approaching in a Stokes fluid. The first ``feeding'' sphere, which represents a body part or feeding appendage, is pushed with a constant force towards a force-free ``food'' sphere. When the feeding sphere reaches within a cutoff distance of the food sphere we assume that nonhydrodynamic interactions lead to capture. We examine approach for a range of size ratios between the feeding and food sphere. To investigate the approach efficiency, we examine the time required for the feeding sphere to capture the food sphere, as well as how far the feeding sphere must move before it captures the food sphere. We also examine the effect of varying the cutoff distance for capture. We find that hydrodynamic interactions strongly affect the results when the size of the spheres is comparable. We describe what relative sizes between feeding sphere and food particles may be most effective for food capture.
Experimental study of surface integrity and fatigue life in the face milling of inconel 718
NASA Astrophysics Data System (ADS)
Wang, Xiangyu; Huang, Chuanzhen; Zou, Bin; Liu, Guoliang; Zhu, Hongtao; Wang, Jun
2018-06-01
The Inconel 718 alloy is widely used in the aerospace and power industries. The machining-induced surface integrity and fatigue life of this material are important factors for consideration due to high reliability and safety requirements. In this work, the milling of Inconel 718 was conducted at different cutting speeds and feed rates. Surface integrity and fatigue life were measured directly. The effects of cutting speed and feed rate on surface integrity and their further influences on fatigue life were analyzed. Within the chosen parameter range, the cutting speed barely affected the surface roughness, whereas the feed rate increased the surface roughness through the ideal residual height. The surface hardness increased as the cutting speed and feed rate increased. Tensile residual stress was observed on the machined surface, which showed improvement with the increasing feed rate. The cutting speed was not an influencing factor on fatigue life, but the feed rate affected fatigue life through the surface roughness. The high surface roughness resulting from the high feed rate could result in a high stress concentration factor and lead to a low fatigue life.
Hydrodynamic starvation in first-feeding larval fishes
China, Victor; Holzman, Roi
2014-01-01
Larval fishes suffer prodigious mortality rates, eliminating 99% of the brood within a few days after first feeding. Hjort (1914) famously attributed this “critical period” of low survival to the larvae’s inability to obtain sufficient food [Hjort (1914) Rapp P-v Réun Cons Int Explor Mer 20:1–228]. However, the cause of this poor feeding success remains to be identified. Here, we show that hydrodynamic constraints on the ubiquitous suction mechanism in first-feeding larvae limit their ability to capture prey, thereby reducing their feeding rates. Dynamic-scaling experiments revealed that larval size is the primary determinant of feeding rate, independent of other ontogenetic effects. We conclude that first-feeding larvae experience “hydrodynamic starvation,” in which low Reynolds numbers mechanistically limit their feeding performance even under high prey densities. Our results provide a hydrodynamic perspective on feeding of larval fishes that focuses on the physical properties of the larvae and prey, rather than on prey concentration and the rate of encounters. PMID:24843180
Koski, Marja; Boutorh, Julia; de la Rocha, Christina
2017-01-01
Zooplankton feeding activity is hypothesized to attenuate the downward flux of elements in the ocean. We investigated whether the zooplankton community composition could influence the flux attenuation, due to the differences of feeding modes (feeding on dispersed vs. aggregated particles) and of metabolic rates. We fed 5 copepod species-three calanoid, one harpacticoid and one poecilamastoid-microplankton food, in either dispersed or aggregated form and measured rates of respiration, fecal pellet production and egg production. Calanoid copepods were able to feed only on dispersed food; when their food was introduced as aggregates, their pellet production and respiration rates decreased to rates observed for starved individuals. In contrast, harpacticoids and the poecilamastoid copepod Oncaea spp. were able to feed only when the food was in the form of aggregates. The sum of copepod respiration, pellet production and egg production rates was equivalent to a daily minimum carbon demand of ca. 10% body weight-1 for all non-feeding copepods; the carbon demand of calanoids feeding on dispersed food was 2-3 times greater, and the carbon demand of harpacticoids and Oncaea spp. feeding on aggregates was >7 times greater, than the resting rates. The zooplankton species composition combined with the type of available food strongly influences the calculated carbon demand of a copepod community, and thus also the attenuation of vertical carbon flux.
Boutorh, Julia; de la Rocha, Christina
2017-01-01
Zooplankton feeding activity is hypothesized to attenuate the downward flux of elements in the ocean. We investigated whether the zooplankton community composition could influence the flux attenuation, due to the differences of feeding modes (feeding on dispersed vs. aggregated particles) and of metabolic rates. We fed 5 copepod species—three calanoid, one harpacticoid and one poecilamastoid–microplankton food, in either dispersed or aggregated form and measured rates of respiration, fecal pellet production and egg production. Calanoid copepods were able to feed only on dispersed food; when their food was introduced as aggregates, their pellet production and respiration rates decreased to rates observed for starved individuals. In contrast, harpacticoids and the poecilamastoid copepod Oncaea spp. were able to feed only when the food was in the form of aggregates. The sum of copepod respiration, pellet production and egg production rates was equivalent to a daily minimum carbon demand of ca. 10% body weight-1 for all non-feeding copepods; the carbon demand of calanoids feeding on dispersed food was 2–3 times greater, and the carbon demand of harpacticoids and Oncaea spp. feeding on aggregates was >7 times greater, than the resting rates. The zooplankton species composition combined with the type of available food strongly influences the calculated carbon demand of a copepod community, and thus also the attenuation of vertical carbon flux. PMID:28545095
Yamamoto, Raquel Coube de Carvalho; Prade, Leila Sauer; Berwig, Luana Cristina; Weinmann, Angela Regina Maciel; Keske-Soares, Márcia
2016-01-01
To correlate cardiorespiratory parameters with gestational age and level of oral feeding skills in the first oral feeding in preterm infants. Study participants were 37 clinically stable preterm infants. Cardiorespiratory rate was assessed before and after introduction of oral feeding. The newborns were divided into three strata according to gestational age at birth. Oral skill was classified into four levels: I - low oral skill and low resistance to feeding; II - low oral skill and high resistance to feeding; III - high oral skill and low resistance to feeding; IV - high oral skill and high resistance to feeding. No difference was observed in heart and respiratory rate between the strata of gestational age at birth and between the levels of oral skill. Comparison between pre- and post-cardiorespiratory rates within each level of oral skill and stratum of gestational age showed difference between heart rate in the strata of gestational ages of 30 to 33 weeks and of 34 to 36 weeks, as well as between oral skill of levels I, II, and IV. With regard to the comparison between pre- and post- respiratory rates, difference was found in the oral skill of level I. Differences were observed between pre- and post-prandial cardiorespiratory rates regarding the first oral feeding, as well as between strata of gestational age at birth and levels of oral feeding skills.
Gürtler, Ricardo E.; Cecere, María C.; Vázquez-Prokopec, Gonzalo M.; Ceballos, Leonardo A.; Gurevitz, Juan M.; Fernández, María del Pilar; Kitron, Uriel; Cohen, Joel E.
2014-01-01
Background The host species composition in a household and their relative availability affect the host-feeding choices of blood-sucking insects and parasite transmission risks. We investigated four hypotheses regarding factors that affect blood-feeding rates, proportion of human-fed bugs (human blood index), and daily human-feeding rates of Triatoma infestans, the main vector of Chagas disease. Methods A cross-sectional survey collected triatomines in human sleeping quarters (domiciles) of 49 of 270 rural houses in northwestern Argentina. We developed an improved way of estimating the human-feeding rate of domestic T. infestans populations. We fitted generalized linear mixed-effects models to a global model with six explanatory variables (chicken blood index, dog blood index, bug stage, numbers of human residents, bug abundance, and maximum temperature during the night preceding bug catch) and three response variables (daily blood-feeding rate, human blood index, and daily human-feeding rate). Coefficients were estimated via multimodel inference with model averaging. Findings Median blood-feeding intervals per late-stage bug were 4.1 days, with large variations among households. The main bloodmeal sources were humans (68%), chickens (22%), and dogs (9%). Blood-feeding rates decreased with increases in the chicken blood index. Both the human blood index and daily human-feeding rate decreased substantially with increasing proportions of chicken- or dog-fed bugs, or the presence of chickens indoors. Improved calculations estimated the mean daily human-feeding rate per late-stage bug at 0.231 (95% confidence interval, 0.157–0.305). Conclusions and Significance Based on the changing availability of chickens in domiciles during spring-summer and the much larger infectivity of dogs compared with humans, we infer that the net effects of chickens in the presence of transmission-competent hosts may be more adequately described by zoopotentiation than by zooprophylaxis. Domestic animals in domiciles profoundly affect the host-feeding choices, human-vector contact rates and parasite transmission predicted by a model based on these estimates. PMID:24852606
Can coarse surface layers in gravel-bedded rivers be mobilized by finer gravel bedload?
NASA Astrophysics Data System (ADS)
Venditti, J. G.; Dietrich, W. E.; Nelson, P. A.; Wydzga, M. A.; Fadde, J.; Sklar, L.
2005-12-01
In response to reductions in sediment supply, gravel-bed rivers undergo a coarsening of the sediments that comprise the river's bed and, over some longer time scale, a river's grade may also be reduced as sediments are depleted from upstream reaches. Coarse, degraded river reaches are commonly observed downstream of dams across the Western United States. Following dam closure, these riverbeds become immobile under the altered flow and sediment supply regimes, leading to a reduction in the available salmon spawning and rearing habitat. Gravel augmentation to these streams is now common practice. This augmentation is typically seen as resurfacing the static coarse bed. As an alternative, we propose that the addition of appropriately finer gravels to these channels may be capable of mobilizing an otherwise immobile coarse surface layer, creating the potential to release fine material trapped beneath the surface. A series of laboratory experiments are being undertaken to test this hypothesis in a 30 m long and 0.86 m wide gravel-bedded flume channel using a constant discharge and a unimodal bed sediment with a median grain size of 8 mm and no sand present. The channel width-to-depth ratio of ~4 suppresses the development of lateral topography and allows us to focus on grain-to-grain interactions. Experiments proceed by maintaining a constant sediment feed until an equilibrium grade and transport rate are established, starving the flume of sediment for at least 24 hours, and then adding narrowly graded gravel over a period of one to two hours at a rate that is ~4x the bedload rate observed prior to terminating the sediment supply. The bed prior to sediment addition has an armor median grain size that is typically twice that of the subsurface and feed size distribution. The volume and median grain size of the resulting pulses are varied. Pulses move downstream rapidly with well-defined fronts in the form of bedload sheets and cause peaks in the sediment flux approximately equal to the supply rate. Once the pulse has passed through the flume, bedload flux rapidly drops to background values, leaving few introduced grains on the bed. When the sediment feed is the median grain size of the subsurface bed material mixture, few armor grains are mobilized, although there is some exchange between the surface and bedload. Pulses composed of the fine tail of the surface grain size distribution are capable of mobilizing all grain sizes in the armor (including the largest grains) as finer bedload fills the interstices of the coarse surface layer. This suggests that gravel augmentation using fine gravel may provide an effective means of improving bed mobility conditions. Further experiments are underway to explore the effects of repeated fine gravel addition on bed state.
Ca2+-regulated-cAMP/PKA signaling in cardiac pacemaker cells links ATP supply to demand.
Yaniv, Yael; Juhaszova, Magdalena; Lyashkov, Alexey E; Spurgeon, Harold A; Sollott, Steven J; Lakatta, Edward G
2011-11-01
In sinoatrial node cells (SANC), Ca(2+) activates adenylate cyclase (AC) to generate a high basal level of cAMP-mediated/protein kinase A (PKA)-dependent phosphorylation of Ca(2+) cycling proteins. These result in spontaneous sarcoplasmic-reticulum (SR) generated rhythmic Ca(2+) oscillations during diastolic depolarization, that not only trigger the surface membrane to generate rhythmic action potentials (APs), but, in a feed-forward manner, also activate AC/PKA signaling. ATP is consumed to pump Ca(2+) to the SR, to produce cAMP, to support contraction and to maintain cell ionic homeostasis. Since feedback mechanisms link ATP-demand to ATP production, we hypothesized that (1) both basal ATP supply and demand in SANC would be Ca(2+)-cAMP/PKA dependent; and (2) due to its feed-forward nature, a decrease in flux through the Ca(2+)-cAMP/PKA signaling axis will reduce the basal ATP production rate. O(2) consumption in spontaneous beating SANC was comparable to ventricular myocytes (VM) stimulated at 3 Hz. Graded reduction of basal Ca(2+)-cAMP/PKA signaling to reduce ATP demand in rabbit SANC produced graded ATP depletion (r(2)=0.96), and reduced O(2) consumption and flavoprotein fluorescence. Neither inhibition of glycolysis, selectively blocking contraction nor specific inhibition of mitochondrial Ca(2+) flux reduced the ATP level. Feed-forward basal Ca(2+)-cAMP/PKA signaling both consumes ATP to drive spontaneous APs in SANC and is tightly linked to mitochondrial ATP production. Interfering with Ca(2+)-cAMP/PKA signaling not only slows the firing rate and reduces ATP consumption, but also appears to reduce ATP production so that ATP levels fall. This distinctly differs from VM, which lack this feed-forward basal cAMP/PKA signaling, and in which ATP level remains constant when the demand changes. Published by Elsevier Ltd.
Lewis, P D; Gous, R M
2006-02-01
Broiler breeder pullets were grown on 8-h photoperiods to 2.23 or 2.42 kg of BW at 20 wk, and then transferred abruptly to 11- or 16-h photoperiods. Subsequently, some of the 11-h photoperiod birds were given 15-min increases in day length weekly or a 1-h increase every 4 wk to reach 16 h of light at 54 wk. The birds transferred abruptly to a 16-h photoperiod at 20 wk matured 4 d earlier than 11-h photoperiod birds, required 500 g less feed to reach 50% lay, but, because of a 3% lower rate of lay after peak, produced 5 fewer eggs to 60 wk. However, the number of settable eggs was similar for the 2 groups because the 11-h photoperiod birds laid more eggs on the floor, resulting in more cracked and dirty eggs. The 11-h photoperiod birds converted feed into egg more efficiently, and were 100 g heavier at end of lay. Increasing the photoperiod in 15-min or 1-h increments from 11 to 16 h during the laying cycle depressed egg production. Mean egg weight and mortality were similar for all lighting groups. The heavier BW birds at 20 wk reached maturity 1 d earlier, but used 1 kg more feed to reach maturity, laid 5 fewer total eggs (because of a 3% lower rate of lay after peak), produced 7 more unsettable eggs (because more eggs were laid on the floor), and converted feed into egg less efficiently than did the lighter BW birds. Mean egg weight, BW at 57 wk, and mortality were similar for both groups. There was no significant light x growth interaction for any performance parameter. It is concluded that there is no benefit to egg production from extending the photoperiod to 16 h when broiler breeders are kept in light-proofed housing, especially if they have access to illuminated nest boxes.
Breast-feeding rates at an inner-city pediatric practice.
Furman, Lydia; Combs, Bridget C; Alexander, Ashley D; O'Riordan, Mary Ann
2008-11-01
To determine rates of breast-feeding in the first 2 months of life at an inner-city pediatric practice. Using retrospective chart reviews, we examined all visits through 2 months of age for infants seen from April 1, 2007, to June 29, 2007, at the Pediatric Practice of Rainbow Babies and Children's Hospital, Cleveland, Ohio, which serves a low-income urban population. Rates of breast-feeding were analyzed by visit number and by infant age category. We reviewed all 557 visits occurring between birth and 2 months of age for all 223 eligible infants. At visit 1 (median age 5 days), the rates of exclusive and any breast-feeding were 22.0% and 40.8%, respectively. By visit 3 (median age 43 days), the rates of exclusive and any breast-feeding were 10.6% and 24.5%, respectively. These inner-city breast-feeding rates are substantially below reported regional and national rates. Barriers to implementing urgently needed interventions are discussed.
Maternal Feeding Goals Described by Low-Income Mothers
Goulding, Alison N.; Lumeng, Julie C.; Rosenblum, Katherine L.; Chen, Yu-Pu; Kaciroti, Niko; Miller, Alison L.
2015-01-01
Objective To identify maternal feeding goals and examine associations of number and type of goals with mother and child characteristics. Design Qualitative interviews about child feeding and quantitative assessment of goal prevalence and associations with mother and child characteristics. Setting Southeastern Michigan. Participants 287 low-income mothers (31% Hispanic or non-white) and their 4- to 8-year-old children. Main Outcome Measure Maternal feeding goals. Analysis Themes were generated using constant comparative method, individual interviews were coded, and prevalence of feeding goals determined. Regression analyses examined associations of mother and child characteristics with number and type of feeding goals. Results Thirteen maternal feeding goals were identified. The most prevalent were to restrict junk food (60%), promote autonomy around eating (54%), prevent obesity (53%), and promote fruits or vegetables (52%). The child being female and heavier with an older, non-Hispanic white, more educated mother with less chaos in the home predicted more maternal feeding goals (all p’s <.05). Specific maternal and child characteristics were associated with individual feeding goals. Conclusions and Implications Depending on their current goals for child feeding, some mothers may benefit from interventions focused on goal development, whereas other mothers may benefit from interventions designed to facilitate goal implementation. PMID:26003749
USDA-ARS?s Scientific Manuscript database
This study evaluated the potential of giving formulated feed to juvenile lake sturgeon (Acipenser fulvescens) and determined the optimal feeding rate of a soft-moist feed on the growth performance and whole-body composition of this fish. Six feeding rates (% body weight per day: % BW/d) of a soft-mo...
Effects of low-density feeding on elk–fetus contact rates on Wyoming feedgrounds
Creech, Tyler G.; Cross, Paul C.; Scurlock, Brandon M.; Maichak, Eric J.; Rogerson, Jared D.; Henningsen, John C.; Creel, Scott
2012-01-01
High seroprevalance for Brucella abortus among elk on Wyoming feedgrounds suggests that supplemental feeding may influence parasite transmission and disease dynamics by altering the rate at which elk contact infectious materials in their environment. We used proximity loggers and video cameras to estimate rates of elk-to-fetus contact (the primary source of brucellosis transmission) during winter supplemental feeding. We compared contact rates during high-density and low-density (LD) feeding treatments that provided the same total amount of food distributed over different areas. Low-density feeding led to >70% reductions in total number of contacts and number of individuals contacting a fetus. Proximity loggers and video cameras provided similar estimates of elk–fetus contact rates. Elk contacted fetuses and random control points equally, suggesting that elk were not attracted to fetuses but encountered them incidentally while feeding. The modeled relationship between contact rate and disease prevalence is nonlinear and LD feeding may result in large reductions in brucellosis prevalence, but this depends on the amount of transmission that occurs on and off feedgrounds.
Treatment of cyanide wastewater by bulk liquid membrane using tricaprylamine as a carrier.
Li, Guoping; Xue, Juanqin; Liu, Nina; Yu, Lihua
2016-01-01
The transport of cyanide from wastewater through a bulk liquid membrane (BLM) containing tricaprylamine (TOA) as a carrier was studied. The effect of cyanide concentration in the feed solution, TOA concentration in the organic phase, the stirring speed, NaOH concentration in the stripping solution and temperature on cyanide transport was determined through BLM. Mass transfer of cyanide through BLM was analyzed by following the kinetic laws of two consecutive irreversible first-order reactions, and the kinetic parameters (k(1), k(2), R(m)(max), t(max), J(a)(max), J(d)(max)) were also calculated. Apparently, increase in membrane entrance (k(1)) and exit rate (k(2)) constants was accompanied by a rise in temperature. The values of activation energies were obtained as 35.6 kJ/mol and 18.2 kJ/mol for removal and recovery, respectively. These values showed that both removal and recovery steps in cyanide transport is controlled by the rate of the chemical complexation reaction. The optimal reaction conditions were determined by BLM using trioctylamine as the carrier: feed phase: pH 4, carrier TOA possession ratio in organic phase: 2% (V/V), stripping phase concentration of NaOH: 1% (W/V), reaction time: 60 min, stirring speed: 250 r/min. Under the above conditions, the removal rate was up to 92.96%. The experiments demonstrated that TOA was a good carrier for cyanide transport through BLM in this study.
Preston, Daniel L; Henderson, Jeremy S; Falke, Landon P; Segui, Leah M; Layden, Tamara J; Novak, Mark
2018-05-08
Describing the mechanisms that drive variation in species interaction strengths is central to understanding, predicting, and managing community dynamics. Multiple factors have been linked to trophic interaction strength variation, including species densities, species traits, and abiotic factors. Yet most empirical tests of the relative roles of multiple mechanisms that drive variation have been limited to simplified experiments that may diverge from the dynamics of natural food webs. Here, we used a field-based observational approach to quantify the roles of prey density, predator density, predator-prey body-mass ratios, prey identity, and abiotic factors in driving variation in feeding rates of reticulate sculpin (Cottus perplexus). We combined data on over 6,000 predator-prey observations with prey identification time functions to estimate 289 prey-specific feeding rates at nine stream sites in Oregon. Feeding rates on 57 prey types showed an approximately log-normal distribution, with few strong and many weak interactions. Model selection indicated that prey density, followed by prey identity, were the two most important predictors of prey-specific sculpin feeding rates. Feeding rates showed a positive relationship with prey taxon densities that was inconsistent with predator saturation predicted by current functional response models. Feeding rates also exhibited four orders-of-magnitude in variation across prey taxonomic orders, with the lowest feeding rates observed on prey with significant anti-predator defenses. Body-mass ratios were the third most important predictor variable, showing a hump-shaped relationship with the highest feeding rates at intermediate ratios. Sculpin density was negatively correlated with feeding rates, consistent with the presence of intraspecific predator interference. Our results highlight how multiple co-occurring drivers shape trophic interactions in nature and underscore ways in which simplified experiments or reliance on scaling laws alone may lead to biased inferences about the structure and dynamics of species-rich food webs. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.
NASA Astrophysics Data System (ADS)
Paengchit, Phacharadit; Saikaew, Charnnarong
2018-02-01
This work aims to investigate the effects of feed rate on surface roughness (Ra) and tool wear (VB) and to obtain the optimal operating condition of the feed rate in dry hard turning of AISI 4140 chromium molybdenum steel for automotive industry applications using TiN+AlCrN coated inserts. AISI 4140 steel bars were employed in order to carry out the dry hard turning experiments by varying the feed rates of 0.06, 0.08 and 0.1 mm/rev based on experimental design technique that can be analyzed by analysis of variance (ANOVA). In addition, the cutting tool inserts were examined after machining experiments by SEM to evaluate the effect of turning operations on tool wear. The results showed that averages Ra and VB were significantly affected by the feed rate at the level of significance of 0.05. Averages Ra and VB values at the feed rate of 0.06 mm/rev were lowest compared to average values at the feed rates of 0.08 and 0.1 mm/rev, based on the main effect plot.
Laser Metal Deposition as Repair Technology for a Gas Turbine Burner Made of Inconel 718
NASA Astrophysics Data System (ADS)
Petrat, Torsten; Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael
Maintenance, repair and overhaul of components are of increasing interest for parts of high complexity and expensive manufacturing costs. In this paper a production process for laser metal deposition is presented, and used to repair a gas turbine burner of Inconel 718. Different parameters for defined track geometries were determined to attain a near net shape deposition with consistent build-up rate for changing wall thicknesses over the manufacturing process. Spot diameter, powder feed rate, welding velocity and laser power were changed as main parameters for a different track size. An optimal overlap rate for a constant layer height was used to calculate the best track size for a fitting layer width similar to the part dimension. Deviations in width and height over the whole build-up process were detected and customized build-up strategies for the 3D sequences were designed. The results show the possibility of a near net shape repair by using different track geometries with laser metal deposition.
Comparative performance of fixed-film biological filters: Application of reactor theory
Watten, B.J.; Sibrell, P.L.
2006-01-01
Nitrification is classified as a two-step consecutive reaction where R1 represents the rate of formation of the intermediate product NO2-N and R2 represents the rate of formation of the final product NO3-N. The relative rates of R1 and R2 are influenced by reactor type characterized hydraulically as plug-flow, plug-flow with dispersion and mixed-flow. We develop substrate conversion models for fixed-film biofilters operating in the first-order kinetic regime based on application of chemical reactor theory. Reactor type, inlet conditions and the biofilm kinetic constants Ki (h-1) are used to predict changes in NH4-N, NO2-N, NO3-N and BOD5. The inhibiting effects of the latter on R1 and R2 were established based on the ?? relation, e.g.:{A formula is presented}where BOD5,max is the concentration that causes nitrification to cease and N is a variable relating Ki to increasing BOD5. Conversion models were incorporated in spreadsheet programs that provided steady-state concentrations of nitrogen and BOD5 at several points in a recirculating aquaculture system operating with input values for fish feed rate, reactor volume, microscreen performance, make-up and recirculating flow rates. When rate constants are standardized, spreadsheet use demonstrates plug-flow reactors provide higher rates of R1 and R2 than mixed-flow reactors thereby reducing volume requirements for target concentrations of NH4-N and NO2-N. The benefit provided by the plug-flow reactor varies with hydraulic residence time t as well as the effective vessel dispersion number, D/??L. Both reactor types are capable of providing net increases in NO2-N during treatment but the rate of decrease in the mixed-flow case falls well behind that predicted for plug-flow operation. We show the potential for a positive net change in NO2-N increases with decreases in the dimensionless ratios K2, (R2 )/K1,( R1 ) and [NO2-N]/[NH4-N] and when the product K1, (R1) t provides low to moderate NH4-N conversions. Maintaining high levels of the latter reduces the effective reactor utilization rate (%) defined here as (RNavg/RNmax)100 where RNavg is the mean reactive nitrogen concentration ([NH4-N] + [NO2-N]) within the reactor, and RNmax represents the feed concentration of the same. Low utilization rates provide a hedge against unexpected increases in substrate loading and reduce water pumping requirements but force use of elevated reactor volumes. Further ?? effects on R1 and R2 can be reduced through use of a tanks-in-series versus a single mixed-flow reactor configuration and by improving the solids removal efficiency of microscreen treatment.
Coutinho, Sonia B; Lira, Pedro Ic; Lima, Marilia C; Frias, Paulo G; Eickmann, Sophie H; Ashworth, Ann
2014-04-01
Breast-feeding counselling has been identified as the intervention with the greatest potential for reducing child deaths, but there is little experience in delivering breast-feeding counselling at scale within routine health systems. The study aim was to compare rates of exclusive breast-feeding associated with a breast-feeding counselling intervention in which community health agents (CHA) received 20 h of training directed at counselling and practical skills with rates pre-intervention when CHA received 4 h of didactic teaching. Cross-sectional surveys of breast-feeding practices were conducted pre- and post-intervention in random samples of 1266 and 1245 infants aged 0-5.9 months, respectively. Recife, Brazil, with a population of 2 million. CHA (n 1449) of Brazil's Family Health Programme were trained to provide breast-feeding counselling at home visits. Rates of exclusive breast-feeding improved when CHA were trained to provide breast-feeding counselling and were significantly higher by 10-13 percentage points at age 3-5.9 months when compared with pre-intervention rates (P < 0.05). Post-intervention point prevalence of exclusive breast-feeding for infants aged <4 months was 63% and for those aged <6 months was 50%. Multifunctional CHA were able to deliver breast-feeding counselling at scale within a routine health service and this was associated with a significant increase in rates of exclusive breast-feeding. The study reinforces the need to focus training on counselling and practical skills; a key component was an interactive style that utilized the knowledge and experience of CHA. The findings are relevant to the call by international organizations to scale up breast-feeding counselling.
Mahalik, K; Sahu, J N; Patwardhan, Anand V; Meikap, B C
2010-03-15
With growing industrialization in power sector, air is being polluted with a host of substances-most conspicuously with suspended particulate matter emanating from coal-fired thermal power plants. Flue gas conditioning, especially in such power plants, requires in situ generation of ammonia. In the present paper, experiments for kinetic study of hydrolysis of urea have been conducted using a borosil glass reactor, first without stirring followed by with stirring. The study reveals that conversion increases exponentially with an increase in temperature and feed concentration. Furthermore, the effect of stirring speed, temperature and concentration on conversion has been studied. Using collision theory, temperature dependency of forward rate constant has been developed from which activation energy of the reaction and the frequency factors have been calculated. It has been observed that the forward rate constant increases with an increase in temperature. The activation energy and frequency factor with stirring has been found to be 59.85 kJ/mol and 3.9 x 10(6)min(-1) respectively with correlation co-efficient and standard deviation being 0.98% and +/-0.1% in that order. (c) 2009 Elsevier B.V. All rights reserved.
Determining the Effect of Material Hardness During the Hard Turning of AISI4340 Steel
NASA Astrophysics Data System (ADS)
Kambagowni, Venkatasubbaiah; Chitla, Raju; Challa, Suresh
2018-05-01
In the present manufacturing industries hardened steels are most widely used in the applications like tool design and mould design. It enhances the application range of hard turning of hardened steels in manufacturing industries. This study discusses the impact of workpiece hardness, feed and depth of cut on Arithmetic mean roughness (Ra), root mean square roughness (Rq), mean depth of roughness (Rz) and total roughness (Rt) during the hard turning. Experiments have been planned according to the Box-Behnken design and conducted on hardened AISI4340 steel at 45, 50 and 55 HRC with wiper ceramic cutting inserts. Cutting speed is kept constant during this study. The analysis of variance was used to determine the effects of the machining parameters. 3-D response surface plots drawn based on RSM were utilized to set up the input-output relationships. The results indicated that the feed rate has the most significant parameter for Ra, Rq and Rz and hardness has the most critical parameter for the Rt. Further, hardness shows its influence over all the surface roughness characteristics.
Gahlawat, Geeta; Srivastava, Ashok K
2013-06-01
In the present investigation, batch cultivation of Azohydromonas australica DSM 1124 was carried out in a bioreactor for growth associated PHB production. The observed batch PHB production kinetics data was then used for the development of a mathematical model which adequately described the substrate limitation and inhibition during the cultivation. The statistical validity test demonstrated that the proposed mathematical model predictions were significant at 99% confidence level. The model was thereafter extrapolated to fed-batch to identify various nutrients feeding regimes during the bioreactor cultivation to improve the PHB accumulation. The distinct capability of the mathematical model to predict highly dynamic fed-batch cultivation strategies was demonstrated by experimental implementation of two fed-batch cultivation strategies. A significantly high PHB concentration of 22.65 g/L & an overall PHB content of 76% was achieved during constant feed rate fed-batch cultivation which is the highest PHB content reported so far using A. australica. Copyright © 2013 Elsevier Ltd. All rights reserved.
Flow, Sediment Supply, and Channel Width Controls on Gravel Bedform Dynamics
NASA Astrophysics Data System (ADS)
Nelson, P. A.; Morgan, J. A.
2017-12-01
Heterogeneous, coarse-grained riverbeds often self-organize into migrating bedforms such as gravel dunes or bedload sheets. It has recently been suggested that sediment supply and the relative mobility of the bed surface sediment affects the type of bedforms that may be present in gravel-bed rivers; however, our understanding of gravel bedform dynamics remains well behind that of bedforms in sandy channels. Here, we present results from flume experiments in which we investigate how the formation and dynamics of gravel bedforms is affected by changes in discharge, sediment supply, and channel geometry. Experiments were conducted in a 1.1-m wide, 18-m long, sediment-feed flume. The initial bed material and the sediment feed mixture was composed of a sediment mixture ranging in size from 0.5-4 mm, with a median value of 3.6 mm. We used two channel geometries (a straight channel and a channel with sinusoidal width variations) and conducted three experimental runs for each geometry: 1) equilibrium sediment supply and steady flow, 2) equilibrium sediment supply and repeated hydrographs, and 3) doubled sediment supply and repeated hydrographs. During the experiments, low-amplitude, migrating bedforms developed and their dynamics were tracked both visually and via collection of repeated structure-from-motion topographic datasets. In the constant-width geometry, bedform amplitudes and migration rates were relatively constant under steady flow, but when subjected to repeated hydrographs the average bedform celerity decreased by about 50% and the amplitude of the bedforms increased and decreased with the changing flow rate. At twice the equilibrium sediment supply, the bedforms organized into an alternating pattern. This pattern was most pronounced at the lower flow rates, and became less stable at the higher discharges of the repeat hydrographs. Preliminary results suggest bedform celerity in the variable width geometry under steady flow and equilibrium sediment supply was half the celerity of the bedforms for the same conditions in the straight-walled geometry. These experiments suggest that variations in discharge, sediment supply, and channel geometry play an important role in the formation and dynamics of bedforms in gravel-bed rivers.
Sigwart, Julia D; Carey, Nicholas
2014-12-01
Chitons (class Polyplacophora) are benthic grazing molluscs with an eight-part aragonitic shell armature. The radula, a serial tooth ribbon that extends internally more than half the length of the body, is mineralised on the active feeding teeth with iron magnetite apparently as an adaptation to constant grazing on rocky substrates. As the anterior feeding teeth are eroded they are shed and replaced with a new row. The efficient mineralisation and function of the radula could hypothetically be affected by changing oceans in two ways: changes in seawater chemistry (pH and pCO2) may impact the biomineralisation pathway, potentially leading to a weaker or altered density of the feeding teeth; rising temperatures could increase activity levels in these ectothermic animals, and higher feeding rates could increase wear on the feeding teeth beyond the animals' ability to synthesise, mineralise, and replace radular rows. We therefore examined the effects of pH and temperature on growth and integrity in the radula of the chiton Leptochiton asellus. Our experiment implemented three temperature (∼10, 15, 20 °C) and two pCO2 treatments (∼400 μatm, pH 8.0; ∼2000 μatm, pH 7.5) for six treatment groups. Animals (n = 50) were acclimated to the treatment conditions for a period of 4 weeks. This is sufficient time for growth of ca. 7-9 new tooth rows or 20% turnover of the mineralised portion. There was no significant difference in the number of new (non-mineralised) teeth or total tooth row count in any treatment. Examination of the radulae via SEM revealed no differences in microwear or breakage on the feeding cusps correlating to treatment groups. The shell valves also showed no signs of dissolution. As a lineage, chitons have survived repeated shifts in Earth's climate through geological time, and at least their radulae may be robust to future perturbations. Copyright © 2014 Elsevier Ltd. All rights reserved.
Boucher, S E; Calsamiglia, S; Parsons, C M; Stein, H H; Stern, M D; Erickson, P S; Utterback, P L; Schwab, C G
2009-12-01
The objectives of this experiment were to measure intestinal digestibility of AA in the rumen-undegraded protein fraction (RUP-AA) of distillers dried grains with solubles (DDGS) and fish meal (FM) samples and to determine whether these feeds contain a constant protein fraction that is undegradable in the rumen and indigestible in the small intestine, as assumed in the French Institut National de la Recherche Agronomique (Paris, France) and Scandinavian AAT-PBV (AAT = AA absorbed from small intestine; PBV = protein balance in the rumen) models. Five sources of DDGS and 5 sources of FM were obtained from Feed Analysis Consortium, Inc. (Champaign, IL). To obtain the rumen-undegradable protein fraction, samples were ruminally incubated in situ for 16 h in 4 lactating cows, and the collected rumen-undegraded residues (RUR) were pooled by sample. Subsamples of the intact feeds and RUR were crop-intubated to 4 cecectomized roosters, and total excreta were collected for 48 h. Intact feeds, RUR, and excreta were analyzed for AA. Basal endogenous AA loss estimates were obtained from fasted birds and were used to calculate standardized digestibility of RUP-AA and AA in the intact feeds. Indigestibility coefficients of the intact feeds were calculated as (100 - % standardized AA digestibility), and indigestibility of the RUR was calculated as [(100 - % ruminal degradation of AA) x (100 - % standardized RUP-AA digestibility)/100]. Results indicate that standardized digestibility of feed-AA differs from RUP-AA for DDGS samples but not for FM samples, and that standardized digestibility of individual AA differs within samples. For the DDGS samples, standardized feed-AA and RUP-AA digestibility values were most often lowest for His and Lys and highest for Met and Trp. For FM samples, standardized feed-AA and RUP-AA digestibility values were most often lowest for His and highest for Trp. Results also indicate that DDGS and most FM samples do not contain a constant protein fraction that is both undegradable in the rumen and indigestible in the small intestine. Indigestibility values of RUR were lower than in intact feeds, suggesting that the feed ingredients used in this experiment contain a protein fraction that is indigestible in the intestine but partly degradable in the rumen or digestible in the intestine after rumen incubation, or both.
Boucher, S E; Calsamiglia, S; Parsons, C M; Stein, H H; Stern, M D; Erickson, P S; Utterback, P L; Schwab, C G
2009-09-01
The objectives of this experiment were to measure intestinal digestibility of AA in rumen undegradable protein (RUP-AA) in soybean meal (SBM) and expeller SBM (SoyPlus, West Central, Ralston, IA; SP) and to determine if these feeds contain a constant protein fraction that is undegradable in the rumen and indigestible in the small intestine, as assumed in the French Institut National de la Recherche Agronomique (Paris, France) and Scandinavian AAT-PBV (AAT = AA absorbed from small intestine; PBV = protein balance in the rumen) models. Three samples of SBM and 3 samples of SP were obtained from the Feed Analysis Consortium Inc. (Savoy, IL). To obtain the RUP fraction, samples were ruminally incubated in situ for 16 h in 4 lactating cows, and the collected rumen undegraded residues (RUR) were pooled by sample. Subsamples of the intact feeds and RUR were crop intubated to 4 cecectomized roosters, and total excreta were collected for 48 h. Intact feeds, RUR, and excreta were analyzed for AA. Basal endogenous AA loss estimates were obtained from fasted birds and were used to calculate standardized digestibility of AA in the intact feeds and RUP-AA. Indigestibility coefficients of the intact feeds were calculated as (100 - % standardized AA digestibility), and indigestibility of the RUR was calculated as [(100 - % ruminal degradation of AA) x [(100 - % standardized RUP-AA digestibility)]/100]. Results indicated that standardized digestibility of feed-AA was similar to standardized digestibility of RUP-AA for SBM and SP samples and that standardized digestibility of individual AA differed within samples. Standardized feed-AA and RUP-AA digestibility values were lowest for Lys and Cys and highest for Trp and Met. Results also indicated that SBM and SP did not contain a constant protein fraction that was both undegradable in the rumen and indigestible in the small intestine. Indigestibility values of RUR were lower than in intact feeds, suggesting that SBM and SP contain a protein fraction that is indigestible in the intestine but partly degradable in the rumen, digestible in the intestine after ruminal incubation, or both.
Breast-feeding and Vitamin D Supplementation Rates in the Ochsner Health System
Ponnapakkam, Tulasi; Ravichandran, Anisha; Bradford, Elease; Tobin, Gregory; Gensure, Robert
2008-01-01
Breast-feeding imparts many benefits to both mothers and infants. Because of these numerous recognized benefits, there has been an effort to increase breast-feeding rates nationwide; increasing breast-feeding rates was one of the goals of the U.S. Department of Health and Human Services' Healthy People 2010 initiative. This study examined the breast-feeding rate at the Ochsner Clinic Foundation by conducting a retrospective chart review of patients aged 0–12 months who visited any branch of the Ochsner hospital system. Our results indicate that the rate of initiation of breast-feeding for children followed at the Ochsner Clinic Foundation is 66.3%. However, as breast-feeding rates rise, there is concern that there may be a resurgence of rickets, a disease caused by the deficiency of vitamin D. Currently the American Academy of Pediatrics recommends that exclusively breast-fed infants receive vitamin D supplementation starting within the first 2 months of life. We have therefore initiated a clinical trial to determine whether vitamin D supplementation is required to prevent rickets in breast-fed children. In the course of conducting this study, we have gathered additional data regarding the patterns of breast-feeding and of vitamin D supplementation for babies born at Ochsner. PMID:21603467
Breast-feeding and Vitamin D Supplementation Rates in the Ochsner Health System.
Ponnapakkam, Tulasi; Ravichandran, Anisha; Bradford, Elease; Tobin, Gregory; Gensure, Robert
2008-01-01
Breast-feeding imparts many benefits to both mothers and infants. Because of these numerous recognized benefits, there has been an effort to increase breast-feeding rates nationwide; increasing breast-feeding rates was one of the goals of the U.S. Department of Health and Human Services' Healthy People 2010 initiative. This study examined the breast-feeding rate at the Ochsner Clinic Foundation by conducting a retrospective chart review of patients aged 0-12 months who visited any branch of the Ochsner hospital system. Our results indicate that the rate of initiation of breast-feeding for children followed at the Ochsner Clinic Foundation is 66.3%. However, as breast-feeding rates rise, there is concern that there may be a resurgence of rickets, a disease caused by the deficiency of vitamin D. Currently the American Academy of Pediatrics recommends that exclusively breast-fed infants receive vitamin D supplementation starting within the first 2 months of life. We have therefore initiated a clinical trial to determine whether vitamin D supplementation is required to prevent rickets in breast-fed children. In the course of conducting this study, we have gathered additional data regarding the patterns of breast-feeding and of vitamin D supplementation for babies born at Ochsner.
A model of clearance rate regulation in mussels
NASA Astrophysics Data System (ADS)
Fréchette, Marcel
2012-10-01
Clearance rate regulation has been modelled as an instantaneous response to food availability, independent of the internal state of the animals. This view is incompatible with latent effects during ontogeny and phenotypic flexibility in clearance rate. Internal-state regulation of clearance rate is required to account for these patterns. Here I develop a model of internal-state based regulation of clearance rate. External factors such as suspended sediments are included in the model. To assess the relative merits of instantaneous regulation and internal-state regulation, I modelled blue mussel clearance rate and growth using a DEB model. In the usual standard feeding module, feeding is governed by a Holling's Type II response to food concentration. In the internal-state feeding module, gill ciliary activity and thus clearance rate are driven by internal reserve level. Factors such as suspended sediments were not included in the simulations. The two feeding modules were compared on the basis of their ability to capture the impact of latent effects, of environmental heterogeneity in food abundance and of physiological flexibility on clearance rate and individual growth. The Holling feeding module was unable to capture the effect of any of these sources of variability. In contrast, the internal-state feeding module did so without any modification or ad hoc calibration. Latent effects, however, appeared transient. With simple annual variability in temperature and food concentration, the relationship between clearance rate and food availability predicted by the internal-state feeding module was quite similar to that observed in Norwegian fjords. I conclude that in contrast with the usual Holling feeding module, internal-state regulation of clearance rate is consistent with well-documented growth and clearance rate patterns.
Breast-feeding patterns in Central Israel.
Berger-Achituv, Sivan; Shohat, Tamar; Garty, Ben-Zion
2005-08-01
The rate of breast-feeding in Israel has increased over the last two decades but is still lower than rates in other developed countries that have taken an active role in promoting breast-feeding. To determine breast-feeding patterns and the association between sociodemographic characteristics and breast-feeding in the Tel Aviv district. The mothers of infants aged 2, 4, 6 and 12 months, attending 59 well-baby clinics in the Tel Aviv district, were interviewed by telephone. Singleton infants who weighed less than 2,000 g and multiple-gestation infants were excluded from the study. The questions covered background data, sociodemographic characteristics of the family, and breast-feeding practices. Stepwise logistic regression was used to analyze the association between breast-feeding and various sociodemographic characteristics. Altogether, 78.5% of the mothers (1,307/1,665) initiated breast-feeding. The rate of breast-feeding at 2, 4, 6 and 12 months was 55.8, 36.8, 29.9 and 11.8%, respectively. Only 35.8% of the infants at 2 months and 11.2% at 6 months were exclusively breast-fed. The mean duration of breast-feeding was 5.2 +/- 0.2 months. Grand multiparas (> or = 5 children) had a significantly higher rate of breast-feeding than women with one to four children (P < 0.001). More likely to breast-feed for 2 weeks or longer were women married to Yeshiva students (odds ratio = 5.3), women with > or = 13 years education (OR = 2.1), and women on maternity leave (OR = 1.6). The predictors for breast-feeding for 6 months or longer were similar. Although the rate of breast-feeding initiation in central Israel was 78.5%, only 29.9% of the mothers continue to breast-feed for 6 months. Already at a young age, an appreciable number of breast-fed infants receive infant formula. Breast-feeding promotion should focus on less educated women, homemakers, and families with one to four children.
Session 1: Public health nutrition. Breast-feeding practices in Ireland.
Tarrant, Roslyn C; Kearney, John M
2008-11-01
Breast-feeding is the superior infant feeding method from birth, with research consistently demonstrating its numerous short- and long-term health benefits for both mother and infant. As a global recommendation the WHO advises that mothers should exclusively breast-feed for the first 6-months of life, thus delaying the introduction of solids during this time. Historically, Irish breast-feeding initiation rates have remained strikingly low in comparison with international data and there has been little improvement in breast-feeding duration rates. There is wide geographical variation in terms of breast-feeding initiation both internationally and in Ireland. Some of these differences in breast-feeding rates may be associated with differing socio-economic characteristics. A recent cross-sectional prospective study of 561 pregnant women attending a Dublin hospital and followed from the antenatal period to 6 months post partum has found that 47% of the Irish-national mothers initiated breast-feeding, while only 24% were still offering 'any' breast milk to their infants at 6 weeks. Mothers' positive antenatal feeding intention to breast-feed is indicated as one of the most important independent determinants of initiation and 'any' breast-feeding at 6 weeks, suggesting that the antenatal period should be targeted as an effective time to influence and affect mothers' attitudes and beliefs pertaining to breast-feeding. These results suggest that the 'cultural' barrier towards breast-feeding appears to still prevail in Ireland and consequently an environment that enables women to breast-feed is far from being achieved. Undoubtedly, a shift towards a more positive and accepting breast-feeding culture is required if national breast-feeding rates are to improve.
Regular monitoring of breast-feeding rates: feasible and sustainable. The Emilia-Romagna experience.
Di Mario, Simona; Borsari, Silvana; Verdini, Eleonora; Battaglia, Sergio; Cisbani, Luca; Sforza, Stefano; Cuoghi, Chiara; Basevi, Vittorio
2017-08-01
An efficient breast-feeding monitoring system should be in place in every country to assist policy makers and health professionals plan activities to reach optimal breast-feeding rates. Design/Setting/Subjects From March to June 2015, breast-feeding rates at 3 and 5 months of age were monitored in Emilia-Romagna, an Italian region, using four questions added to a newly developed paediatric immunization database with single records for each individual. Data were collected at primary-care centres. Breast-feeding definitions and 24 h recall as recommended by the WHO were used. Direct age standardization was applied to breast-feeding rates. Record linkage with the medical birth database was attempted to identify maternal, pregnancy and delivery factors associated with full breast-feeding rates at 3 and 5 months of age. Data on breast-feeding were collected for 14044 infants. The mean regional full breast-feeding rate at 3 months was 52 %; differences between local health authorities ranged from 42 to 62 %. At 5 months of age, the mean regional full breast-feeding rate dropped to 33 % (range between local health authorities: 26 to 46 %). Record linkage with the birth certificate database was successful for 93 % of records. Total observations more than doubled with respect to the previous regional survey. The new monitoring system implemented in 2015 in Emilia-Romagna region, totally integrated with the immunization database, has proved to be feasible, sustainable and more efficient than the previous one. This system can be a model for other regions and countries where the vast majority of mothers obtain vaccinations from public health facilities and that already have an immunization database in place.
Pados, Britt F; Thoyre, Suzanne M; Estrem, Hayley H; Park, Jinhee; Knafl, George J; Nix, Brant
2017-01-01
Infants with hypoplastic left heart syndrome often experience difficulty with oral feeding, which contributes to growth failure, morbidity, and mortality. In response to feeding difficulty, clinicians often change the bottle nipple, and thus milk flow rate. Slow-flow nipples have been found to reduce the stress of feeding in other fragile infants, but no research has evaluated the responses of infants with hypoplastic left heart syndrome to alterations in milk flow. The purpose of this study was to evaluate the physiological and behavioural responses of an infant with hypoplastic left heart syndrome to bottle feeding with either a slow-flow (Dr. Brown's Preemie) or a standard-flow (Dr. Brown's Level 2) nipple. A single infant was studied for three feedings: two slow-flow and one standard-flow. Oral feeding, whether with a slow-flow or a standard-flow nipple, was distressing for this infant. During slow-flow feeding, she experienced more coughing events, whereas during standard-flow she experienced more gagging. Disengagement and compelling disorganisation were most common during feeding 3, that is slow-flow, which occurred 2 days after surgical placement of a gastrostomy tube. Clinically significant changes in heart rate, oxygen saturation, and respiratory rate were seen during all feedings. Heart rate was higher during standard-flow and respiratory rate was higher during slow-flow. Further research is needed to examine the responses of infants with hypoplastic left heart syndrome to oral feeding and to identify strategies that will support these fragile infants as they learn to feed. Future research should evaluate an even slower-flow nipple along with additional supportive feeding strategies.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Yu, Y.M.; Wagner, D.A.; Tredget, E.E.
1990-07-01
The role of the splanchnic region (Sp) in whole body leucine metabolism was assessed in six chronically catheterized fasting mongrel dogs and in eight dogs during constant enteral feeding of a complete amino acid solution (0.24 g.kg-1.h-1). We used primed continuous intravenous infusions of L-(1-13C,15N)leucine and L-(1-14C)leucine and measurements of arteriovenous isotope and leucine balance across the gut, liver, and Sp. In the fasted condition, 3.5% of arterial leucine supply was oxidized in the Sp, accounting for 13% of total body leucine oxidation, with 10% by liver. With amino acid feeding (1) leucine carbon and nitrogen fluxes and oxidation weremore » increased (P less than 0.01) at the whole body level; (2) the percent of whole body leucine oxidation occurring in the Sp and liver increased (P less than 0.01) to 41 and 27%, respectively; (3) fractional metabolic utilization of leucine delivered to the Sp was reduced (P less than 0.01) from 47 to 35%; (4) the deamination rate of leucine in the gut was increased (P less than 0.05), along with an increased reamination rate of alpha-ketoisocaproic acid in the Sp (P less than 0.05). These findings reveal that the Sp accounts for a small fraction of whole body leucine oxidation during the fasting condition, but it plays a quantitatively important role in total body leucine oxidation during amino acid feeding; the gut and liver play cooperative roles in controlling leucine supply to peripheral tissues.« less
Macías-Cruz, Ulises; Quintero-Elisea, Juan A; Avendaño-Reyes, Leonel; Correa-Calderón, Abelardo; Alvarez-Valenzuela, Francisco D; Soto-Navarro, S A; Lucero-Magaña, F A; González-Reyna, Arnoldo
2010-02-01
Twenty Dorper x Pelibuey male lambs were used to evaluate the effect of substitution of forage with fresh orange pulp (FOP) in diets for fattening lambs on productive behavior, nutrient intake, apparent digestibility coefficient, and feeding costs. Lambs were divided into five groups (n = 4) and then housed in individual pens during 70 d. Treatments consisted of five levels of FOP (0, 25, 50, 75 and 100%) which substituted buffel grass hay on the base diet (40:60%, forage:concentrate). Additionally, changes in chemical composition of FOP stored in stack during 8 d were evaluated (from the day 1 until day 8). Daily feed intake expressed as kg/day and % live weight, lamb growth rate, feeding cost of each lamb per day and per fattening period, hemicellulose intake, and DM, OM, CP, NDF and hemicellulose digestibility showed a quadratic effect (P < 0.05), while DM, OM and CP intake presented a cubic effect (P < 0.05) with the increasing level of FOP. The maximum estimated value for those variables was observed at 75% of hay replacement with FOP. With respect to changes in chemical composition of pulp stored, DM content increased (P = 0.0011) from 210 to 310 g/kg FOP and OM, fiber fraction, and ash content were constant (P > 0.05) among storage days. Therefore, replacing around 75% of buffel grass hay with FOP in diets for fattening lambs resulted in the best growth rate and more efficient diet utilization. Fresh orange pulp stored in a stack did not change its chemical composition, and did not affect its utilization as a sheep feedstuff.
Ngonghala, Calistus N; Teboh-Ewungkem, Miranda I; Ngwa, Gideon A
2015-06-01
We derive and study a deterministic compartmental model for malaria transmission with varying human and mosquito populations. Our model considers disease-related deaths, asymptomatic immune humans who are also infectious, as well as mosquito demography, reproduction and feeding habits. Analysis of the model reveals the existence of a backward bifurcation and persistent limit cycles whose period and size is determined by two threshold parameters: the vectorial basic reproduction number Rm, and the disease basic reproduction number R0, whose size can be reduced by reducing Rm. We conclude that malaria dynamics are indeed oscillatory when the methodology of explicitly incorporating the mosquito's demography, feeding and reproductive patterns is considered in modeling the mosquito population dynamics. A sensitivity analysis reveals important control parameters that can affect the magnitudes of Rm and R0, threshold quantities to be taken into consideration when designing control strategies. Both Rm and the intrinsic period of oscillation are shown to be highly sensitive to the mosquito's birth constant λm and the mosquito's feeding success probability pw. Control of λm can be achieved by spraying, eliminating breeding sites or moving them away from human habitats, while pw can be controlled via the use of mosquito repellant and insecticide-treated bed-nets. The disease threshold parameter R0 is shown to be highly sensitive to pw, and the intrinsic period of oscillation is also sensitive to the rate at which reproducing mosquitoes return to breeding sites. A global sensitivity and uncertainty analysis reveals that the ability of the mosquito to reproduce and uncertainties in the estimations of the rates at which exposed humans become infectious and infectious humans recover from malaria are critical in generating uncertainties in the disease classes.
de Verdal, Hugues; Narcy, Agnès; Bastianelli, Denis; Chapuis, Hervé; Même, Nathalie; Urvoix, Séverine; Le Bihan-Duval, Elisabeth; Mignon-Grasteau, Sandrine
2011-08-17
Poultry production has been widely criticized for its negative environmental impact related to the quantity of manure produced and to its nitrogen and phosphorus content. In this study, we investigated which traits related to excretion could be used to select chickens for lower environmental pollution.The genetic parameters of several excretion traits were estimated on 630 chickens originating from 2 chicken lines divergently selected on apparent metabolisable energy corrected for zero nitrogen (AMEn) at constant body weight. The quantity of excreta relative to feed consumption (CDUDM), the nitrogen and phosphorus excreted, the nitrogen to phosphorus ratio and the water content of excreta were measured, and the consequences of such selection on performance and gastro-intestinal tract (GIT) characteristics estimated. The genetic correlations between excretion, GIT and performance traits were established. Heritability estimates were high for CDUDM and the nitrogen excretion rate (0.30 and 0.29, respectively). The other excretion measurements showed low to moderate heritability estimates, ranging from 0.10 for excreta water content to 0.22 for the phosphorus excretion rate. Except for the excreta water content, the CDUDM was highly correlated with the excretion traits, ranging from -0.64 to -1.00. The genetic correlations between AMEn or CDUDM and the GIT characteristics were very similar and showed that a decrease in chicken excretion involves an increase in weight of the upper part of the GIT, and a decrease in the weight of the small intestine. In order to limit the environmental impact of chicken production, AMEn and CDUDM seem to be more suitable criteria to include in selection schemes than feed efficiency traits.
Investigation of the hydrochlorination of SiCl4
NASA Technical Reports Server (NTRS)
Mui, J. Y. P.
1983-01-01
A basic, experimental study on the hydrochlorination of silicon tetrachloride and metallurgical grade silicon with hydrogen gas to form trichlorosilane was carried out to greatly expand the range of reaction conditions. The equilibrium constant, K sub p, for the hydrochlorination reaction was measured as a function of temperature, pressure and concentration. The variation of the equilibrium constant as a function of temperature provided the measurement on the heat of reaction, delta H, by the Second Law Method. The value of delta H was measured to give 10.6 Kcal/mole. The equilibrium constant was also studied as a function of concentration. In agreement with the theory, the equilibrium constant remained constant with respect to the varying H2/SiCl4 feed ratios. On the other hand, the effect of pressure on the equilibrium constant was found to be more complex.
Application of a bioenergetics model for hatchery production: Largemouth bass fed commercial diets
Csargo, Isak J.; Michael L. Brown,; Chipps, Steven R.
2012-01-01
Fish bioenergetics models based on natural prey items have been widely used to address research and management questions. However, few attempts have been made to evaluate and apply bioenergetics models to hatchery-reared fish receiving commercial feeds that contain substantially higher energy densities than natural prey. In this study, we evaluated a bioenergetics model for age-0 largemouth bass Micropterus salmoidesreared on four commercial feeds. Largemouth bass (n ≈ 3,504) were reared for 70 d at 25°C in sixteen 833-L circular tanks connected in parallel to a recirculation system. Model performance was evaluated using error components (mean, slope, and random) derived from decomposition of the mean square error obtained from regression of observed on predicted values. Mean predicted consumption was only 8.9% lower than mean observed consumption and was similar to error rates observed for largemouth bass consuming natural prey. Model evaluation showed that the 97.5% joint confidence region included the intercept of 0 (−0.43 ± 3.65) and slope of 1 (1.08 ± 0.20), which indicates the model accurately predicted consumption. Moreover model error was similar among feeds (P = 0.98), and most error was probably attributable to sampling error (unconsumed feed), underestimated predator energy densities, or consumption-dependent error, which is common in bioenergetics models. This bioenergetics model could provide a valuable tool in hatchery production of largemouth bass. Furthermore, we believe that bioenergetics modeling could be useful in aquaculture production, particularly for species lacking historical hatchery constants or conventional growth models.
40 CFR 63.453 - Monitoring requirements.
Code of Federal Regulations, 2014 CFR
2014-07-01
... process wastewater feed rate; (2) The steam feed rate; and (3) The process wastewater column feed...: (A) Composite daily sample of outlet soluble BOD5 concentration to monitor for maximum daily and...
40 CFR 63.453 - Monitoring requirements.
Code of Federal Regulations, 2012 CFR
2012-07-01
... process wastewater feed rate; (2) The steam feed rate; and (3) The process wastewater column feed...: (A) Composite daily sample of outlet soluble BOD5 concentration to monitor for maximum daily and...
40 CFR 63.453 - Monitoring requirements.
Code of Federal Regulations, 2013 CFR
2013-07-01
... process wastewater feed rate; (2) The steam feed rate; and (3) The process wastewater column feed...: (A) Composite daily sample of outlet soluble BOD5 concentration to monitor for maximum daily and...
Realizable feed-element patterns and optimum aperture efficiency in multibeam antenna systems
NASA Technical Reports Server (NTRS)
Yngvesson, K. S.; Rahmat-Samii, Y.; Johansson, J. F.; Kim, Y. S.
1988-01-01
The results of an earlier paper by Rahmat-Samii et al. (1981), regarding realizable patterns from feed elements that are part of an array that feeds a reflector antenna, are extended. The earlier paper used a cos exp q theta model for the element radiation pattern, whereas here a parametric study is performed, using a model that assumes a central beam of cos exp q theta shape, with a constant sidelobe level outside the central beam. Realizable q-values are constrained by the maximum directivity based on feed element area. The optimum aperture efficiency (excluding array feed network losses) in an array-reflector system is evaluated as a function of element spacing using this model as well as the model of the earlier paper. Experimental data for tapered slot antenna (TSA) arrays are in agreement with the conclusions based on the model.
Production of acids and alcohols from syngas in a two-stage continuous fermentation process.
Abubackar, Haris Nalakath; Veiga, María C; Kennes, Christian
2018-04-01
A two-stage continuous system with two stirred tank reactors in series was utilized to perform syngas fermentation using Clostridium carboxidivorans. The first bioreactor (bioreactor 1) was maintained at pH 6 to promote acidogenesis and the second one (bioreactor 2) at pH 5 to stimulate solventogenesis. Both reactors were operated in continuous mode by feeding syngas (CO:CO 2 :H 2 :N 2 ; 30:10:20:40; vol%) at a constant flow rate while supplying a nutrient medium at different flow rates of 8.1, 15, 22 and 30 ml/h. A cell recycling unit was added to bioreactor 2 in order to recycle the cells back to the reactor, maintaining the OD 600 around 1 in bioreactor 2 throughout the experimental run. When comparing the flow rates, the best results in terms of solvent production were obtained with a flow rate of 22 ml/h, reaching the highest average outlet concentration for alcohols (1.51 g/L) and the most favorable alcohol/acid ratio of 0.32. Copyright © 2018 Elsevier Ltd. All rights reserved.
Land use, macroalgae, and a tumor-forming disease in marine turtles.
Van Houtan, Kyle S; Hargrove, Stacy K; Balazs, George H
2010-09-29
Wildlife diseases are an increasing concern for endangered species conservation, but their occurrence, causes, and human influences are often unknown. We analyzed 3,939 records of stranded Hawaiian green sea turtles (Chelonia mydas) over 28 years to understand fibropapillomatosis, a tumor-forming disease linked to a herpesvirus. Turtle size is a consistent risk factor and size-standardized models revealed considerable spatial and temporal variability. The disease peaked in some areas in the 1990s, in some regions rates remained constant, and elsewhere rates increased. Land use, onshore of where the turtles feed, may play a role. Elevated disease rates were clustered in watersheds with high nitrogen-footprints; an index of natural and anthropogenic factors that affect coastal eutrophication. Further analysis shows strong epidemiological links between disease rates, nitrogen-footprints, and invasive macroalgae and points to foraging ecology. These turtles now forage on invasive macroalgae, which can dominate nutrient rich waters and sequester environmental N in the amino acid arginine. Arginine is known to regulate immune activity, promote herpesviruses, and contribute to tumor formation. Our results have implications for understanding diseases in aquatic organisms, eutrophication, herpesviruses, and tumor formation.
Li, Jun; Bardag-Gorce, F; Joan, Oliva; French, BA; Dedes, J; French, SW
2010-01-01
Propranolol, a beta adrenergic blocker prevents the blood alcohol (BAL) cycle in rats fed ethanol intragastrically at a constant rate by preventing the cyclic changes in the metabolic rate caused by fluctuating levels of norepinephrine released into the blood. The change in the rate of metabolism changes the rate of alcohol elimination in the blood which causes the BAL to cycle. Microarray analysis of the livers from the rats fed ethanol and propranolol showed similar changes in clusters of functionally related gene expressions. The controls and the trough of the cycle differed dramatically from the cluster pattern seen in the rats at the peaks of the blood alcohol cycle. The changes in gene expression induced by ethanol were similar when propranolol was fed without ethanol especially with the changes in the kinases and phosphatases, Toll-like receptor signaling and cytokine-cytokine receptor interaction were also changed. The changes in gene expression caused by ethanol and propranolol feeding are alike probably because both drugs induce β adrenergic receptor desensitization. PMID:19925788
The effect of qat chewing and other factors on breast-feeding and child survival in a Yemeni society
Mansoub, Mohammed Al; Omer, Rahab; Omer, Rasha; Shadli, Muna; Williams, Rachael
2011-01-01
In a survey conducted in Dammar, Republic of Yemen, 755 mothers were interviewed to investigate the patterns and factors affecting childhood feeding practices. It was found that full breast-feeding rate (41.8%) and timely introduction of complementary feeding rate (57.4%) were low, bottle-feeding rate (25.1%) was high and timely first suckling rate was zero. It was also found that the more educated and older mothers tended to wean their children earlier than illiterate and younger mothers. A significant association between regular frequent qat chewing and history of child death was observed. The implications of these findings were discussed. PMID:27493314
Ibrahim Ali Omer, Mohammed; Mansoub, Mohammed Al; Omer, Rahab; Omer, Rasha; Shadli, Muna; Williams, Rachael
2011-01-01
In a survey conducted in Dammar, Republic of Yemen, 755 mothers were interviewed to investigate the patterns and factors affecting childhood feeding practices. It was found that full breast-feeding rate (41.8%) and timely introduction of complementary feeding rate (57.4%) were low, bottle-feeding rate (25.1%) was high and timely first suckling rate was zero. It was also found that the more educated and older mothers tended to wean their children earlier than illiterate and younger mothers. A significant association between regular frequent qat chewing and history of child death was observed. The implications of these findings were discussed.
Breast-feeding patterns and factors determining exclusive breast-feeding.
Koosha, A; Hashemifesharaki, R; Mousavinasab, N
2008-12-01
Breast-feeding is a major determinant of infants' health and survival. The aim of this study was to examine breast-feeding patterns and the role of some factors on exclusive breast-feeding. The study was done at the Health Centre of Community Oriented Medical Education of Zanjan City, Iran. Mothers of 650 infants younger than one year of age were interviewed directly by healthcare providers. The necessary information was recorded on pre-structured questionnaires, and the feeding patterns of all infants were determined. The rate of breast-feeding was greater than 92 percent during the first year of life. Exclusive breast-feeding rate in the first five days of life was 82 percent, but it declined to 44 percent at the first month. The chance of exclusive breast-feeding was higher in infants who were on demand feeding (odds ratio [OR] 2.6), breastfed more than eight times per day (OR 2.23), and their birth weight ranged from 2.5 to 4 kg (OR 2.16). This chance was less among infants exposed to pacifiers (OR 2.62) and with the numbers of deliveries equal to or more than three (OR 2.25). The rates of breast-feeding initiation and its duration at six and 12 months were higher than the national goal. The rate of exclusive breast-feeding was nearly 44 percent. It seems necessary to elucidate the role of other factors, such as socioeconomic status, on exclusive breast-feeding.
NASA Astrophysics Data System (ADS)
Palupi, Bekti; Supranto, Sediawan, Wahyudi Budi; Setyadji, Moch.
2017-05-01
This time, the natural resources of zircon sand is processed into several zirconium products which is utilized for various industries, such as ceramics, glass industry, metal industry and nuclear industry. The process of zircon sand into zirconium products through several stages, one of them is leaching process of Na2ZrO3 with HCl. In this research, several variations of recycle-rate/feed-rate had been done to determine the effect on leaching process. The leaching was processed at temperature of 90°C, ratio of Na2ZrO3:HCl = 1g:30mL, and 142 rotary per minute of stirring speed for 30 minutes with variation of recycle-rate/feed-rate such as 0.478, 0.299, 0.218, 0.171 and 0.141. The diameter size of Na2ZrO3 powder that used are 0.088 to 0.149 mm. This process was carried out in Continuous Stirred Tank Reactor (CSTR) series with recycle. Based on this research, the greater of the recycle-rate/feed-rate variable, the obtained Zr recovery decreased. The correlation between recycle-rate/feed-rate and Zr recovery is shown by the equation y = -146.91x + 103.51, where y is the Zr recovery and x is the recycle-rate/feed-rate. The highest Zr recovery was 90.52% obtained at recycle-rate/feed-rate 0.141. The mathematical modeling involving the probability model P(r) = 2β2r2 exp(-βr2) can be applied to this leaching process with Sum of Squared Errors (SSE) values in the range of 6×10-7 - 7×10-6.
Effect of feeding silkworm on growth performance and feed efficiency of snakehead (Channa striata)
NASA Astrophysics Data System (ADS)
Firmani, U.; Lono
2018-04-01
The snakehead, Chana striata is a carnivorous freshwater fish and widely distributed in Asia. High demand of this fish has been triggering many aquaculturist to culture C. stiata. Feed was the important factor for fish growth. Silkworm has high protein content, low fat and can be used as natural feed for finfish. This study investigate the silkworm feed in C. striata. The treatment of this research were A (100 % pellet); B (100 % silkworm); C (combination of 75 % pellet and 25 % silkworm); D (combination of 50 % pellet and 50 % silkworm); and E (combination of 25 % pellet and 75 % silkworm). The variables measured in this study were relatif growth, specific growth rate, feed efficiency, feed conversion ratio, and survival rate. The result show that silkworm gave the high growth performance, feed efficiency and survival rate of the snakehead (Channa striata) compared with the control.
Bao, Yilu; Wen, Shumei; Cong, Wei; Wu, Xia; Ning, Zhengxiang
2012-07-01
Cultivation of Spirulina platensis using ammonium salts or wastewater containing ammonium as alternative nitrogen sources is considered as a commercial way to reduce the production cost. In this research, by analyzing the relationship between biomass production and ammonium- N consumption in the fed-batch culture of Spirulina platensis using ammonium bicarbonate as a nitrogen nutrient source, an online adaptive control strategy based on optical density (OD) measurements for controlling ammonium feeding was presented. The ammonium concentration was successfully controlled between the cell growth inhibitory and limiting concentrations using this OD-based feedback feeding method. As a result, the maximum biomass concentration (2.98 g/l), productivity (0.237 g/l·d), nitrogen-to-cell conversion factor (7.32 gX/gN), and contents of protein (64.1%) and chlorophyll (13.4 mg/g) obtained by using the OD-based feedback feeding method were higher than those using the constant and variable feeding methods. The OD-based feedback feeding method could be recognized as an applicable way to control ammonium feeding and a benefit for Spirulina platensis cultivations.
Tool feed influence on the machinability of CO(2) laser optics.
Arnold, J B; Steger, P J; Saito, T T
1975-08-01
Influence of tool feed on reflectivity of diamond-machined surfaces was evaluated using materials (gold, silver, and copper) from which CO(2) laser optics are primarily produced. Fifteen specimens were machined by holding all machining parameters constant, except tool feed. Tool feed was allowed to vary by controlled amounts from one evaluation zone (or part) to another. Past experience has verified that the quality of a diamond-machined surface is not a function of the cutting velocity; therefore, this experiment was conducted on the basis that a variation in cutting velocity was not an influencing factor on the diamondturning process. Inspection results of the specimens indicated that tool feeds significantly higher than 5.1 micro/rev (200 microin./rev) produced detrimental effects on the machined surfaces. In some cases, at feeds as high as 13 microm/rev (500 microin./rev), visible scoring was evident. Those surfaces produced with tool feeds less than 5.1 microm/rev had little difference in reflectivity. Measurements indicat d that their reflectivity existed in a range from 96.7% to 99.3% at 10.6 microm.
Breast feeding initiation rate across Western countries: does religion matter? An ecological study
Cohen, Emmanuel; Kramer, Michael S
2016-01-01
Background Breast feeding initiation rates remain below 80% in some Western countries. Many individual-level determinants are known; however, less is known regarding cultural and societal determinants, such as religion, that could explain population-level variations. We examined the correlations of the proportions of Catholics and Protestants with the breast feeding initiation rates across and within Western countries. Methods Using publicly available data, we carried out an ecological study comparing the proportions of Catholics and Protestants with the rates of breast feeding initiation. We correlated data at the country level, and additionally explored within-country data in five Western countries: France (Departments), Ireland (counties), the UK (countries), Canada (provinces) and the USA (states). Our analyses accounted for human development index, gross domestic product and population density. Results We observed a negative correlation (r=−0.30) between the proportion of Catholics and the rate of breast feeding initiation in Western countries. This correlation was consistent when using within-country data in France (r=−0.27), Ireland (r=−0.23), the UK (r=−0.79) and Canada (r=−0.62). In the USA, the positive correlation (r=0.26) between a state's proportion of Catholics and its breast feeding initiation rate was confounded by race, education and socioeconomic status (SES). After controlling for education and SES, the state proportion of non-Hispanic white Catholics was negatively correlated (r=−0.29) with the rate of breast feeding initiation. Conclusions In this ecological study, we found consistent negative correlations between Catholicism and breast feeding initiation rates. Qualitative and quantitative studies at the individual level are needed to confirm and explain our findings. Our results suggest that women living in a country or region where Catholicism has historically dominated are less likely to initiate breast feeding, and that breast feeding promotion policies should be adapted to better fit populations' cultural and religious norms. PMID:28588983
Breast feeding initiation rate across Western countries: does religion matter? An ecological study.
Bernard, Jonathan Y; Cohen, Emmanuel; Kramer, Michael S
2016-01-01
Breast feeding initiation rates remain below 80% in some Western countries. Many individual-level determinants are known; however, less is known regarding cultural and societal determinants, such as religion, that could explain population-level variations. We examined the correlations of the proportions of Catholics and Protestants with the breast feeding initiation rates across and within Western countries. Using publicly available data, we carried out an ecological study comparing the proportions of Catholics and Protestants with the rates of breast feeding initiation. We correlated data at the country level, and additionally explored within-country data in five Western countries: France (Departments), Ireland (counties), the UK (countries), Canada (provinces) and the USA (states). Our analyses accounted for human development index, gross domestic product and population density. We observed a negative correlation (r=-0.30) between the proportion of Catholics and the rate of breast feeding initiation in Western countries. This correlation was consistent when using within-country data in France (r=-0.27), Ireland (r=-0.23), the UK (r=-0.79) and Canada (r=-0.62). In the USA, the positive correlation (r=0.26) between a state's proportion of Catholics and its breast feeding initiation rate was confounded by race, education and socioeconomic status (SES). After controlling for education and SES, the state proportion of non-Hispanic white Catholics was negatively correlated (r=-0.29) with the rate of breast feeding initiation. In this ecological study, we found consistent negative correlations between Catholicism and breast feeding initiation rates. Qualitative and quantitative studies at the individual level are needed to confirm and explain our findings. Our results suggest that women living in a country or region where Catholicism has historically dominated are less likely to initiate breast feeding, and that breast feeding promotion policies should be adapted to better fit populations' cultural and religious norms.
de Oliveira, Samuel Conceição; de Castro, Heizir Ferreira; Visconti, Alexandre Eliseu Stourdze; Giudici, Reinaldo
2015-03-01
Experiments of continuous alcoholic fermentation of sugarcane juice with flocculating yeast recycle were conducted in a system of two 0.22-L tower bioreactors in series, operated at a range of dilution rates (D 1 = D 2 = 0.27-0.95 h(-1)), constant recycle ratio (α = F R /F = 4.0) and a sugar concentration in the feed stream (S 0) around 150 g/L. The data obtained in these experimental conditions were used to adjust the parameters of a mathematical model previously developed for the single-stage process. This model considers each of the tower bioreactors as a perfectly mixed continuous reactor and the kinetics of cell growth and product formation takes into account the limitation by substrate and the inhibition by ethanol and biomass, as well as the substrate consumption for cellular maintenance. The model predictions agreed satisfactorily with the measurements taken in both stages of the cascade. The major differences with respect to the kinetic parameters previously estimated for a single-stage system were observed for the maximum specific growth rate, for the inhibition constants of cell growth and for the specific rate of substrate consumption for cell maintenance. Mathematical models were validated and used to simulate alternative operating conditions as well as to analyze the performance of the two-stage process against that of the single-stage process.
Jang, Gun-Ja; Kim, Sun-Hee
2010-04-01
This study was done to investigate the effects of breast-feeding education and support services on rate of breast-feeding three and six months after birth, and the effect on infant's growth (weight, height, body mass index [BMI]). The experimental group which had both education and support services was compared with the control group which had only breast-feeding education. This study was a quasi-experimental study with a time-series design. The participants were 39 mothers who were hospitalized for childbirth. Twenty mother were assigned to the experimental group and 19 mothers, to the control group. The breast feeding education was done during hospitalization, and support services were provided once a week after discharge for a month (a total 4 times) by a maternity ward nurse. Data regarding breastfeeding rate at one month after childbirth was collected by phone call; the breast-feeding rates at three and six months after childbirth were collected in a visit to the families. The child's weight and height were also measured during the visit. The experimental group had a statistically significant higher rate for frequency of breast-feeding at one, three and six months after childbirth than the control group. However, there was no meaningful difference between the two groups for infant growth. The results of this study suggest that breast-feeding education is helpful for a start, but support services are also necessary to sustain breast-feeding.
Cherdthong, Anusorn; Wanapat, Metha
2014-04-01
This study aimed to determine the effect of urea-calcium sulphate mixture (U-cas) levels in high-quality feed block (HQFB) on ruminal digestibility, fermentation and gas kinetics in rumen fluid of swamp buffalo by using in vitro techniques. The treatments were seven levels of U-cas incorporated in HQFB at 0, 3, 6, 9, 12, 15 and 18% and the experimental design was a completely randomized design. Gas production rate constants for the insoluble fraction, potential extent of gas and cumulative gas were linearly increased with increasing levels of U-cas in HQFB. The in vitro dry matter digestibility, in vitro organic matter digestibility, true digestibility and microbial mass were altered by treatments and were greatest at 18% U-cas supplementation. Concentrations of propionate were linearly increased with increasing levels of U-cas and was highest with U-cas supplementation at 18%. The NH3 -N concentration was highest when urea was added in the HQFB while NH3 -N concentration tended to be reduced with increasing level of U-cas. The findings suggest supplementation of 18% U-cas in HQFB improves kinetics of gas production, rumen fermentation, digestibility and microbial mass as well as controlling the rate of N degradation in the rumen of swamp buffalo. © 2014 Japanese Society of Animal Science.
NASA Astrophysics Data System (ADS)
Bayraktar, S.; Hekimoglu, A. P.; Turgut, Y.; Haciosmanoglu, M.
2018-01-01
In this study, Al-35Zn alloy was produced by permanent mold casting. To investigate the cutting performance of uncoated and TiAlN coated carbide end mills on this alloy, a series of tests were carried out in the CNC vertical machining center at a constant cutting speed, feed rate and depth of cut. The results obtained from the tests showed that uncoated carbide end mill have lower cutting force and surface roughness than TiAlN coated carbide end mill. These observations are discussed in terms of the alloys properties, cutting tool surfaces, and friction and wear behavior between the cutting tool and the material.
NASA Astrophysics Data System (ADS)
Sánchez-Monreal, Juan; García-Salaberri, Pablo A.; Vera, Marcos
2017-09-01
A one-dimensional model is proposed for the anode of a liquid-feed direct ethanol fuel cell. The complex kinetics of the ethanol electro-oxidation reaction is described using a multi-step reaction mechanism that considers free and adsorbed intermediate species on Pt-based binary catalysts. The adsorbed species are modeled using coverage factors to account for the blockage of the active reaction sites on the catalyst surface. The reaction rates are described by Butler-Volmer equations that are coupled to a one-dimensional mass transport model, which incorporates the effect of ethanol and acetaldehyde crossover. The proposed kinetic model circumvents the acetaldehyde bottleneck effect observed in previous studies by incorporating CH3CHOHads among the adsorbed intermediates. A multi-objetive genetic algorithm is used to determine the reaction constants using anode polarization and product selectivity data obtained from the literature. By adjusting the reaction constants using the methodology developed here, different catalyst layers could be modeled and their selectivities could be successfully reproduced.
NASA Astrophysics Data System (ADS)
Schlosser, H. J.; Anger, K.
1982-06-01
Filtration rate (F) and ingestion rate (I) were measured in the rotifer Brachionus plicatilis feeding on the flagellate Dunaliella spec. and on yeast cells (Saccharomyces cerevisiae). 60-min experiments in rotating bottles served as a standard for testing methodological effects on levels of F and I. A lack of rotation reduced F values by 40 %, and a rise in temperature from 18° to 23.5 °C increased them by 42 %. Ingestion rates increased significantly up to a particle (yeast) concentration of ca. 600-800 cells · μl-1; then they remained constant, whereas filtration rates decreased beyond this threshold. Rotifer density (up to 1000 ind · ml-1) and previous starvation (up to 40 h) did not significantly influence food uptake rates. The duration of the experiment proved to have the most significant effect on F and I values: in 240-min experiments, these values were on the average more than 90 % lower than in 15-min experiments. From this finding it is concluded that ingestion rates obtained from short-term experiments (60 min or less) cannot be used in energy budgets, because they severely overestimate the actual long-term feeding capacity of the rotifers. At the lower end of the particle size spectrum (2 to 3 µm) there are not only food cells, but apparently also contaminating faecal particles. Their number increased with increasing duration of experiments and lead to an underestimation of F and I. Elemental analyses of rotifers and their food suggest that B. plicatilis can ingest up to 0.6 mJ or ca. 14 % of its own body carbon within 15 min. The long term average was estimated as 3.4 mJ · ind-1 · d-1 or ca. 75 % of body carbon · d-1.
Schluter, Philip J; Carter, Sarnia; Percival, Teuila
2006-09-01
To present current breast-feeding rates for Pacific infants resident in New Zealand. Reasons for the introduction of complementary liquid foods were also explored. A longitudinal study using hospital discharge summary records and maternal home interviews undertaken at 6 weeks, 12 and 24 months postpartum. Turnbull's non-parametric survival analysis was used to model exclusive breast-feeding rates. Auckland, New Zealand. The cohort comprised 1376 infants at 6 weeks, 1223 infants at 12 months and 1142 infants at 24 months. Exclusive breast-feeding rates at hospital discharge, 6 weeks, 3 and 6 months postpartum were 84% (95% confidence interval (CI): 80-88%), 49% (95% CI: 43-55%), 37% (95% CI: 32-42%) and 9% (95% CI: 7-11%), respectively. Significant ethnic difference existed, with Samoan mothers having higher exclusive breast-feeding rates than Tongan mothers (P = 0.002). The percentage of infants receiving any breast milk at hospital discharge, 6 weeks, 12 and 24 months was 96% (95% CI: 94-97%), 95% (95% CI: 94-96%), 31% (95% CI: 28-34%) and 15% (95% CI: 13-17%), respectively. Again ethnic differences emerged. Common reasons cited for discontinuation of exclusive breast-feeding included uncertainty of breast milk supply (56%), problems with breasts (30%) and difficulties breast-feeding in work or educational environments (26%). However, 691 (50%) mothers sought no advice about their breast-feeding concerns within the first six weeks of life. Exclusive breast-feeding rates for Pacific infants are ethnically heterogeneous, have declined since the 1990s and fall short of the World Health Organization recommendations. The principal reasons cited for exclusive breast-feeding discontinuation echo those reported over a decade ago.
Using quality improvement to promote breast-feeding in a local health department.
Wright, Sarah S; Lea, C Suzanne; Holloman, Roxanne; Cornett, Amanda; Harrison, Lisa Macon; Randolph, Greg D
2012-01-01
In 2008, breast-feeding initiation and continuation rates in Beaufort County, North Carolina, were lower than statewide rates. A quality improvement (QI) project was initiated to increase breast-feeding rates by enhancing the overall environment that supports breast-feeding at the Beaufort County Health Department. This case study describes one of the first QI initiatives implemented through the North Carolina Center for Public Health Quality QI training program, conducted in 2009. The aim of this project was to improve the health and wellness of mothers and infants in Beaufort County by promoting breast-feeding among Beaufort County Health Department Women, Infants and Children (WIC) clients. Using QI tools, 4 new approaches to breast-feeding promotion were tested and implemented: creating a nurturing location to breast-feed while at the health department, actively telephoning new mothers to provide breast-feeding support, incentivizing adoption of educational messages by providing a breast-feeding tote bag, and promoting new WIC food packages. These enhancements involved staff in QI planning and implementation and correlated with improved breast-feeding initiation for WIC clients during the year following project completion.
The effect of the baby-friendly hospital initiative on long-term breast feeding.
Duyan Camurdan, A; Ozkan, S; Yüksel, D; Pasli, F; Sahin, F; Beyazova, U
2007-08-01
The aim of this study was to evaluate the effects of 'baby-friendly hospital initiative' (BFHI) on breast feeding. In the four consecutive months after BFHI in Gazi University Hospital (November 2002-February 2003), breast feeding status until the second year of life in 297 babies, born in the same hospital was compared with the values of 258 babies born before BFHI (November 2001-February 2002). The exclusive breast feeding rate in the first 6 months was higher in the babies born after BFHI. Cox regression analysis revealed that BFHI increases the duration of breast feeding 1.5 times. At the end of the second year, cumulative rate of breast feeding was higher in the group after-BFHI (p=0.0036). The rate of breast feeding was increased by BFHI implementation.
Bottle-feeding histories of preterm infants.
Pickler, R H; Mauck, A G; Geldmaker, B
1997-01-01
To describe the bottle-feeding histories of preterm infants and determine physical indices related to and predictive of bottle-feeding initiation and progression. Ex post facto. Academic medical center. A convenience sample of 40 preterm infants without concomitant cardiac, gastrointestinal, or cognitive impairment. Postconceptional age at first bottle-feeding, full bottle-feeding, and discharge. The morbidity rating, using the Neonatal Medical Index (NMI), was most strongly correlated with postconceptional age at first bottle-feeding (r = .34, p < .05), full bottle-feeding (r = .65, p < .01), and discharge (r = .55, p < .05). The morbidity rating also accounted for 12%, 42%, and 30% of the variance in postconceptional age at first bottle-feeding, full bottle-feeding, and discharge, respectively. The NMI may be a useful tool for predicting the initiation and progression of bottle-feeding in preterm infants.
Sharma, Deepak; Farahbakhsh, Nazanin; Sharma, Sweta; Sharma, Pradeep; Sharma, Akash
2017-03-27
To evaluate the role of kangaroo mother care (KMC) on growth and breast feeding rates in very low birth weight (VLBW) neonates. A literature search was done to identify eligible studies using various electronic database searches including PubMed and EMBASE, various Web of Science including Scopus, Index Copernicus, African Index Medicus (AIM), Thomson Reuters (ESCI), Chemical Abstracts Service (CAS), SCIWIN (Scientific World Index), Google Scholar, Latin American and Caribbean Health Sciences Information System (LILACS), Index Medicus for the Eastern Mediterranean Region (IMEMR), Index Medicus for the South-East Asian Region (IMSEAR), and Western Pacific Region Index Medicus (WPRIM) and various clinical trial registries. Thirteen studies that evaluated the role of KMC in VLBW infants in improvement of growth outcome (weight/length/head circumference) or breast feeding rates as their primary or secondary outcome, were included in this systematic review. Seven studies evaluated both growth and breast feeding rates, four studies evaluated breast feeding rates and two studies evaluated growth outcome. All included studies except one either showed positive effect or no effect on growth and breast feeding rates. KMC has a positive effect on growth of the VLBW infants and also leads to increase in the breast-feeding rates. KMC should be an integral part of neonatal care and should be promoted as an essential newborn care component.
High rate manure supernatant digestion.
Bergland, Wenche Hennie; Dinamarca, Carlos; Toradzadegan, Mehrdad; Nordgård, Anna Synnøve Røstad; Bakke, Ingrid; Bakke, Rune
2015-06-01
The study shows that high rate anaerobic digestion may be an efficient way to obtain sustainable energy recovery from slurries such as pig manure. High process capacity and robustness to 5% daily load increases are observed in the 370 mL sludge bed AD reactors investigated. The supernatant from partly settled, stored pig manure was fed at rates giving hydraulic retention times, HRT, gradually decreased from 42 to 1.7 h imposing a maximum organic load of 400 g COD L(-1) reactor d(-1). The reactors reached a biogas production rate of 97 g COD L(-1) reactor d(-1) at the highest load at which process stress signs were apparent. The yield was ∼0.47 g COD methane g(-1) CODT feed at HRT above 17 h, gradually decreasing to 0.24 at the lowest HRT (0.166 NL CH4 g(-1) CODT feed decreasing to 0.086). Reactor pH was innately stable at 8.0 ± 0.1 at all HRTs with alkalinity between 9 and 11 g L(-1). The first stress symptom occurred as reduced methane yield when HRT dropped below 17 h. When HRT dropped below 4 h the propionate removal stopped. The yield from acetate removal was constant at 0.17 g COD acetate removed per g CODT substrate. This robust methanogenesis implies that pig manure supernatant, and probably other similar slurries, can be digested for methane production in compact and effective sludge bed reactors. Denaturing gradient gel electrophoresis (DGGE) analysis indicated a relatively fast adaptation of the microbial communities to manure and implies that non-adapted granular sludge can be used to start such sludge bed bioreactors. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.
Social feeding decisions in horses (Equus caballus).
Krüger, Konstanze; Flauger, Birgit
2008-05-01
Like many other herbivores, in a natural environment equids feed on rather evenly distributed resources. However, the vegetation in their vast habitats constantly changes. If food is plentiful only little competition occurs over food, and in non-competitive situations domestic horses tend to return to the same feeding site until it is overgrazed. In contrast, they compete over limited food for which the social status of the individuals appears to be important. Especially in ruminants several studies have proved an influence of social organisations, rank, sex and the depletion of feeding sites on the feeding behaviour of individuals. However, it is not yet understood whether and how social aspects affect horses' feeding decisions. Curiosity about the influence of social rank on the horses' feeding decisions between two, equally with high-quality surplus food-filled buckets placed in different social feeding conditions, led us to create the test below. The observer horses were alternately tested with a dominant and a subordinate demonstrator placed in one of the three different positions. We conclude that domestic horses use social cognition and strategic decision making in order to decide where to feed in a social feeding situation. When possible they tend to return to the same, continuously supplied feeding site and switch to an "avoidance tendency" in the presence of dominant horses or when another horse is already feeding there. Thus, the social rank and the position of conspecifics affect the feeding strategy of horses.
Wang, Wenru; Lau, Ying; Chow, Aloysius; Chan, Kin Sin
2014-06-01
to (1) estimate the breast-feeding intention, initiation and duration rate; (2) identify the reasons to initiate and wean breast feeding and (3) explore predictors of breast-feeding duration. a prospective longitudinal study antenatal clinics of five regional hospitals from four clusters in Hong Kong a population-based sample of 2098 women in the second trimester of pregnancy was recruited with a systematic sampling method. three different sets of self-administered questionnaires were used to measure the breast-feeding intention, initiation and duration, demographic, socio-economic, obstetric, complications of pregnancy and intrapartum variables at three time points. Reasons for initiating and weaning breast feeding, the formal and informal supportive resources of participants during breast feeding were collated at the third time points. the rates of artificial feeding and breast feeding were 41.1% and 58.9%, whereas breast-feeding intention and initiation rates were 85.3% and 67.0%, respectively. The breast-feeding duration rates were 11.1%, 10.3%, 10.7% and 26.7%, for the 'within <1 week', '1-3 weeks', '>3-6 weeks' and '>6 weeks' groups. The common reasons for initiating breast feeding were that breast feeding is beneficial for both the baby (89.8%) and mother (39.7%). Reasons for weaning breast feeding were insufficient breast milk (32.7%), tiredness and fatigue (39.7%) and return to work (29.6%). Partner, relatives and nurse midwives were important supportive resource during breast feeding. Ordinal logistic regression analysis identified five predictive factors of breast-feeding duration. Participants who were working part-time or were housewives (p=0.037), had monthly family income of
Broadband Integrated Lens for Illuminating Reflector Antenna With Constant Aperture Efficiency
NASA Astrophysics Data System (ADS)
Fernandes, Carlos A.; Lima, Eduardo B.; Costa, Jorge R.
2010-12-01
A new integrated shaped lens antenna configuration is described with frequency stable radiation pattern and phase center position across a broad 1:3 frequency band, which can be used for focal plane reflector feeding in quasi-optical radio telescope systems. The lens is compatible with the integration of ultrawideband uniplanar printed feeds at its base and equally broadband mixing devices, like the Hot Electron Bolometer (HEB), although these are not used in the present work. Measurements on a scaled mm-wave lab prototype have confirmed stable performance versus frequency, with only dB directivity variation, and better than 94% Gaussicity, thanks to the possibility to impose a predefined output radiation pattern template. Simulations were performed to test the illumination of an off-set parabolic reflector by the lens radiation pattern, which confirmed reasonably constant aperture efficiency in the order of 78% across the 100% bandwidth.
Hu, Hui; Qian, Jiangchao; Chu, Ju; Wang, Yonghong; Zhuang, Yingping; Zhang, Siliang
2009-07-01
The recombinant Pichia pastoris harboring an improved methionine adenosyltransferase (MAT) shuffled gene was employed to biosynthesize S-adenosyl-L: -methionine (SAM). Two L: -methionine (L: -Met) addition strategies were used to supply the precursor: the batch addition strategy (L: -Met was added separately at three time points) and the continuous feeding strategies (L: -Met was fed continuously at the rate of 0.1, 0.2, and 0.5 g l(-1) h(-1), respectively). SAM accumulation, L: -Met conversion rate, and SAM productivity with the continuous feeding strategies were all improved over the batch addition strategy, which reached 8.46 +/- 0.31 g l(-1), 41.7 +/- 1.4%, and 0.18 +/- 0.01 g l(-1) h(-1) with the best continuous feeding strategy (0.2 g l(-1) h(-1)), respectively. The bottleneck for SAM production with the low L: -Met feeding rate (0.1 g L(-1) h(-1)) was the insufficient L: -Met supply. The analysis of the key enzyme activities indicated that the tricarboxylic acid cycle and glycolytic pathway were reduced with the increasing L: -Met feeding rate, which decreased the adenosine triphosphate (ATP) synthesis. The MAT activity also decreased as the L: -Met feeding rate rose. The reduced ATP synthesis and MAT activity were probably the reason for the low SAM accumulation when the L: -Met feeding rate reached 0.5 g l(-1) h(-1).
NASA Astrophysics Data System (ADS)
Hill, Kimberly M.; Gaffney, John; Baumgardner, Sarah; Wilcock, Peter; Paola, Chris
2017-01-01
When fine sediment is added to a coarse-grained system, the mobility and composition of the bed can change dramatically. We conducted a series of flume experiments to determine how the size of fine particles introduced to an active gravel bed influences the mobility and composition of the bed. We initiated our experiments using a constant water discharge and feed rate of gravel. After the system reached steady state, we doubled the feed rate by supplying a second sediment of equal or lesser size, creating size ratios from 1:1 to 1:150. As we decreased the relative size of the fine particles, the system transitioned among three regimes: (1) For particle size ratios close to one, the bed slope increased to transport the additional load of similar-sized particles. The bed surface remained planar and unchanged. (2) For intermediate particle size ratios, the bed slope decreased with the additional fines. The bed surface became patchy with regions of fine and coarse grains. (3) For the largest particle size ratios (the smallest fines), the bed slope remained relatively unchanged. The subsurface became clogged with fine sediment, but fine particles were not present in the surface layer. This third regime constitutes washload, defined by those fractions that do not affect bed-material transport conditions. Our results indicate washload should be defined in terms of three conditions: small grain size relative to that of the bed material, full suspension based on the Rouse number, and a small rate of fine sediment supply relative to transport capacity.
MTBE Hydrolysis in Dilute Aqueous Solution Using Heterogeneous Strong Acid Catalysts
NASA Astrophysics Data System (ADS)
Rixey, W. G.
2003-12-01
The objective of this research has been the development of a potential in situ catalytic process for the hydrolysis of methyl tertiary butyl ether (MTBE) to tertiary butyl alcohol (TBA) and methanol in ground water. Bench-scale batch reactor studies were conducted over a temperature range of 23 deg C to 50 deg C with several heterogeneous strong acid catalysts to obtain rates of hydrolysis of MTBE to TBA and methanol at dilute concentrations in water. Continuous flow experiments were then conducted to obtain kinetic data over a temperature range of 15 deg C to 50 deg C for various flow rates for the most active catalysts. It was found that the batch and continuous flow experiments yielded similar intrinsic kinetic rate constants when sorption of MTBE to the catalyst was accounted for. Additional fixed-bed experiments were conducted with deionized water and 0.005 M CaCl2 feed solutions containing 100 mg/L MTBE, respectively, to assess the deactivation of the catalyst, and deactivation was found to be controlled by ion exchange of H+ in the catalyst with Ca+2 in the feed. Our results indicate that, for low to moderate groundwater velocities and cation concentrations at ambient temperatures, an in situ reactive barrier process using the most active catalysts studied in this research could be a viable process in terms of both suitable conversion of MTBE and catalyst life. Although application to in situ remediation is emphasized, the results of this research are also applicable to ex-situ groundwater treatment.
Lei, Juan; Booth, David T
2014-10-01
Temperature has significant effects on physiological activities and geographical distribution of ectotherms. The Asian house gecko Hemidactylus frenatus has become one of the most widely distributed reptiles in the world and is an invasive species in Australia. Since being introduced into northern Australia, Asian house geckos have spread rapidly and expanded into south-east Queensland and northern New South Wales. Despite their rapid spread, there have been few studies that address thermal adaptability of this species. In order to understand how temperature might limit the distribution and feeding behavior of H. frenatus we observed gecko foraging activities in the wild over the winter period, measured the temperature at which voluntary feeding ceases, and assessed the effect of temperature (30, 25, 20, and 18 °C) on post-feeding metabolic rate. Resting metabolic rate and post-feeding peak in metabolic rate decreased with low temperature, while the duration of elevated metabolic rate after feeding increased at lower temperature. The SDA coefficient (a ratio of the energy expended due to the post-feeding rise in metabolic rate to the energy contained within the meal) did not change systematically with ambient temperature. Field observations and voluntary feeding experiments showed that H. frenatus stop feeding when ambient temperature drops below 17 °C, so that persistent night time temperatures below 17 °C may be limiting the distribution of this species. Copyright © 2014 Elsevier Ltd. All rights reserved.
Integrating diverse forage sources reduces feed gaps on mixed crop-livestock farms.
Bell, L W; Moore, A D; Thomas, D T
2017-12-04
Highly variable climates induce large variability in the supply of forage for livestock and so farmers must manage their livestock systems to reduce the risk of feed gaps (i.e. periods when livestock feed demand exceeds forage supply). However, mixed crop-livestock farmers can utilise a range of feed sources on their farms to help mitigate these risks. This paper reports on the development and application of a simple whole-farm feed-energy balance calculator which is used to evaluate the frequency and magnitude of feed gaps. The calculator matches long-term simulations of variation in forage and metabolisable energy supply from diverse sources against energy demand for different livestock enterprises. Scenarios of increasing the diversity of forage sources in livestock systems is investigated for six locations selected to span Australia's crop-livestock zone. We found that systems relying on only one feed source were prone to higher risk of feed gaps, and hence, would often have to reduce stocking rates to mitigate these risks or use supplementary feed. At all sites, by adding more feed sources to the farm feedbase the continuity of supply of both fresh and carry-over forage was improved, reducing the frequency and magnitude of feed deficits. However, there were diminishing returns from making the feedbase more complex, with combinations of two to three feed sources typically achieving the maximum benefits in terms of reducing the risk of feed gaps. Higher stocking rates could be maintained while limiting risk when combinations of other feed sources were introduced into the feedbase. For the same level of risk, a feedbase relying on a diversity of forage sources could support stocking rates 1.4 to 3 times higher than if they were using a single pasture source. This suggests that there is significant capacity to mitigate both risk of feed gaps at the same time as increasing 'safe' stocking rates through better integration of feed sources on mixed crop-livestock farms across diverse regions and climates.
Rate constants for the reactions of OH with CH3Cl, CH2Cl2, CHCl3, and CH3Br
NASA Technical Reports Server (NTRS)
Hsu, K.-J.; Demore, W. B.
1994-01-01
Rate constants for the reactions of OH with CH3Cl, CH2Cl2, CHCl3, and CH3Br have been measured by a relative rate technique in which the reaction rate of each compound was compared to that of HFC-152a (CH3CHF2) and (for CH2Cl2) HFC-161 (CH3CH2F). Using absolute rate constants for HFC-152a and HFC-161, which we have determined relative to those for CH4, CH3CCl3, and C2H6, temperature dependent rate constants of both compounds were derived. The derived rate constant for CH3Br is in good agreement with recent absolute measurements. However, for the chloromethanes all the rate constants are lower at atmospheric temperatures than previously reported, especially for CH2Cl2 where the present rate constant is about a factor of 1.6 below the JPL 92-20 value. The new rate constant appears to resolve a discrepancy between the observed atmospheric concentrations and those calculated from the previous rate constant and estimated release rates.
Crude protein and essential amino acid requirements in chicks during the first week posthatch.
Sklan, D; Noy, Y
2003-05-01
1. This study examined optimal lysine and sulphur amino acid supply in the first week posthatch in broilers and the relationship between essential amino acids and dietary crude protein during the first week posthatch on performance at 7 d and through marketing. 2. The optimal supply during the 7 d posthatch using a 230 g/kg crude protein diet for sulphur amino acids was 9.1 and for lysine was 10.3-10.8 g/kg with maximal body weight (BW) or feed efficiency as the criteria. 3. Feeding diets with crude protein content ranging from 200 to 260 g/kg with either constant amounts of essential amino acids at different crude protein levels or constant ratios of essential amino acids to crude protein resulted in enhanced performance at 7 but not at 4 d with high protein intake and proportionally increased essential amino acids. 4. Performance on diets with crude protein ranging from 160 to 280 g/kg, with constant ratios of essential amino acid to crude protein, was much enhanced with the high crude protein diets at 7 d. All chicks were transferred to standard diets after 7 d and the BW advantage due to the balanced amino acid-high crude protein diet remained through marketing. 5. Thus increasing essential amino acids in a constant ratio to crude protein enhanced performance during the 7 d posthatch.
[Effects of an Individual Breast-feeding Promotion Program for Married Immigrant Women].
Park, Mi Kyoung; Moon, So Hyun
2016-02-01
This study was designed to evaluate the effects of an individual breast-feeding promotion program to address breast-feeding knowledge, attitude, method and rate of practice for married immigrant women. A non-equivalent control group quasi-experimental design was used (experimental group=16, control group=17). The intervention consisted of 3 phases: (1) Within 2 hours of delivery - individual breast-feeding training through video/verbal/practical training education and demonstration (2) After 1~2 days - group training using video, model doll, and breast models (3) After 7 days - family visit, counseling, retraining and reinforcement training. The data were analyzed using non-parametric tests with the SPSS program. Married immigrant women who participated in the individual breast-feeding program scored high in knowledge, attitude, method and rate of practice compared to the control group. The results indicate that the individual breast-feeding program is very effective in increasing breast-feeding knowledge, attitude, method and rate of practicing breast feeding for married immigrant women. So, nurses are encouraged to aggressively utilize individual breast-feeding programs to help married immigrant women, who are exposed to vulnerability due to various situations.
Developing a workplace breast feeding support model for employed lactating mothers.
Yimyam, Susanha; Hanpa, Wasana
2014-06-01
Resuming work is often considered an obstacle for continued breast feeding. The objectives of this participatory action research study were to develop a breast feeding support model in the workplace and to compare breast feeding rates before and after implementation of the breast feeding support campaign. Twenty-four women participated before the implementation of the breast feeding support campaign, whereas 31 women participated after the campaign. Data were collected by interviewing employed women about their breast feeding practices within six months post partum. Additional data were collected through interviews with the workplace administrator and head of work sections as well as observation of the breast feeding support campaigns. Qualitative data were analysed using thematic analysis, whereas quantitative data were analysed using descriptive statistics and χ(2) test. The workplace breast feeding support model was developed based on the concept of Mother-Friendly Workplace Initiatives by the World Alliance for Breastfeeding Action (WABA) and the Thai government׳s promotion of a workplace breast feeding corner. Within this model, a committee for breast feeding support was created for working with the research team to develop breast feeding activities and media for breast feeding education and breast feeding support campaigns in the workplace. Breast feeding rates at six months after implementation of the breast feeding support campaign were significantly higher than rates before, both for exclusive breast feeding and any breast feeding at levels .004 and .033, respectively. These results suggest that breast feeding should be encouraged in every workplace depending on context. Individual advice and help for employed mothers should be provided from pregnancy through weaning in the postpartum period. Copyright © 2014 Elsevier Ltd. All rights reserved.
Control of the Protein Turnover Rates in Lemna minor
Trewavas, A.
1972-01-01
The control of protein turnover in Lemna minor has been examined using a method described in the previous paper for determining the rate constants of synthesis and degradation of protein. If Lemna is placed on water, there is a reduction in the rate constants of synthesis of protein and an increase (3- to 6-fold) in the rate constant of degradation. The net effect is a loss of protein from the tissue. Omission of nitrate, phosphate, sulfate, magnesium, or calcium results in increases in the rate constant of degradation of protein. An unusual dual effect of benzyladenine on the turnover constants has been observed. Treatment of Lemna grown on sucrose-mineral salts with benzyladenine results in alterations only in the rate constant of synthesis. Treatment of Lemna grown on water with benzyladenine alters only the rate constant of degradation. Abscisic acid on the other hand alters both rate constants of synthesis and degradation of protein together. Inclusion of growth-inhibiting amino acids in the medium results in a reduction in the rate constants of synthesis and increases in the rate constant of degradation of protein. It is concluded that the rate of turnover of protein in Lemna is very dependent on the composition of the growth medium. Conditions which reduce growth rates also reduce the rates of synthesis of protein and increase those of degradation. PMID:16657895
Iodine Hall Thruster Propellant Feed System for a CubeSat
NASA Technical Reports Server (NTRS)
Polzin, Kurt A.
2014-01-01
There has been significant work recently in the development of iodine-fed Hall thrusters for in-space propulsion applications.1 The use of iodine as a propellant provides many advantages over present xenon-gas-fed Hall thruster systems. Iodine is a solid at ambient temperature (no pressurization required) and has no special handling requirements, making it safe for secondary flight opportunities. It has exceptionally high ?I sp (density times specific impulse), making it an enabling technology for small satellite near-term applications and providing system level advantages over mid-term high power electric propulsion options. Iodine provides thrust and efficiency that are comparable to xenonfed Hall thrusters while operating in the same discharge current and voltage regime, making it possible to leverage the development of flight-qualified xenon Hall thruster power processing units for the iodine application. Work at MSFC is presently aimed at designing, integrating, and demonstrating a flight-like iodine feed system suitable for the Hall thruster application. This effort represents a significant advancement in state-of-the-art. Though Iodine thrusters have demonstrated high performance with mission enabling potential, a flight-like feed system has never been demonstrated and iodine compatible components do not yet exist. Presented in this paper is the end-to-end integrated feed system demonstration. The system includes a propellant tank with active feedback-control heating, fill and drain interfaces, latching and proportional flow control valves (PFCV), flow resistors, and flight-like CubeSat power and control electronics. Hardware is integrated into a CubeSat-sized structure, calibrated and tested under vacuum conditions, and operated under under hot-fire conditions using a Busek BHT-200 thruster designed for iodine. Performance of the system is evaluated thorugh accurate measurement of thrust and a calibrated of mass flow rate measurement, which is a function of reservoir temperature/pressure, the flow resistors, and the setting of the PFCV. The calibration is performed using independent flow control monitoring techniques, providing an in situ measure of the flowrate as a function of controllable parameters. The reservoir temperature controls the iodine sublimation rate, providing propellant to ths thruster by pressurizing the propellant feed system to approx.1-2 psi. Control of the temperature and the PFCV are used to maintain reservoir pressure and keep the thruster discharge current constant.
An individual-based model of the krill Euphausia pacifica in the California Current
NASA Astrophysics Data System (ADS)
Dorman, Jeffrey G.; Sydeman, William J.; Bograd, Steven J.; Powell, Thomas M.
2015-11-01
Euphausia pacifica is an abundant and important prey resource for numerous predators of the California Current and elsewhere in the North Pacific. We developed an individual-based model (IBM) for E. pacifica to study its bioenergetics (growth, stage development, reproduction, and mortality) under constant/ideal conditions as well as under varying ocean conditions and food resources. To model E. pacifica under varying conditions, we coupled the IBM to an oceanographic-ecosystem model over the period 2000-2008 (9 years). Model results under constant/ideal food conditions compare favorably with experimental studies conducted under food unlimited conditions. Under more realistic variable oceanographic conditions, mean growth rates over the continental shelf were positive only when individuals migrated diurnally to the depth of maximum phytoplankton layer during nighttime feeding. Our model only used phytoplankton as prey and coastal growth rates were lower than expected (0.01 mm d-1), suggesting that a diverse prey base (zooplankton, protists, marine snow) may be required to facilitate growth and survival of modeled E. pacifica in the coastal environment. This coupled IBM-ROMS modeling framework and its parameters provides a tool for understanding the biology and ecology of E. pacifica and could be developed to further the understanding of climatic effects on this key prey species and enhance an ecosystem approach to fisheries and wildlife management in this region.
Fischer-Tropsch synthesis in near-critical n-hexane: Pressure-tuning effects
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bochniak, D.J.; Subramaniam, B.
For Fe-catalyzed Fischer-Tropsch (FT) synthesis with near-critical n-hexane (P{sub c} = 29.7 bar; T{sub c} = 233.7 C) as the reaction medium, isothermal pressure tuning from 1.2--2.4 P{sub c} (for n-hexane) at the reaction temperature (240 C) significantly changes syngas conversion and product selectivity. For fixed feed rates of syngas (H{sub 2}/CO = 0.5; 50 std. cm{sup 3}/g catalyst) and n-hexane (1 mL/min), syngas conversion attains a steady state at all pressures, increasing roughly threefold in this pressure range. Effective rate constants, estimated assuming a first-order dependence of syngas conversion on hydrogen, reveal that the catalyst effectiveness increases with pressuremore » implying the alleviation of pore-diffusion limitations. Pore accessibilities increase at higher pressures because the extraction of heavier hydrocarbons from the catalyst pores is enhanced by the liquid-like densities, yet better-than-liquid transport properties, of n-hexane. This explanation is consistent with the single {alpha} (= 0.78) Anderson-Schulz-Flory product distribution, the constant chain termination probability, and the higher primary product (1-olefin) selectivities ({approximately}80%) observed at the higher pressures. Results indicate that the pressure tunability of the density and transport properties of near-critical reaction media offers a powerful tool to optimize catalyst activity and product selectivity during FT reactions on supported catalysts.« less
Functional response models to estimate feeding rates of wading birds
Collazo, J.A.; Gilliam, J.F.; Miranda-Castro, L.
2010-01-01
Forager (predator) abundance may mediate feeding rates in wading birds. Yet, when modeled, feeding rates are typically derived from the purely prey-dependent Holling Type II (HoII) functional response model. Estimates of feeding rates are necessary to evaluate wading bird foraging strategies and their role in food webs; thus, models that incorporate predator dependence warrant consideration. Here, data collected in a mangrove swamp in Puerto Rico in 1994 were reanalyzed, reporting feeding rates for mixed-species flocks after comparing fits of the HoII model, as used in the original work, to the Beddington-DeAngelis (BD) and Crowley-Martin (CM) predator-dependent models. Model CM received most support (AIC c wi = 0.44), but models BD and HoII were plausible alternatives (AIC c ??? 2). Results suggested that feeding rates were constrained by predator abundance. Reductions in rates were attributed to interference, which was consistent with the independently observed increase in aggression as flock size increased (P < 0.05). Substantial discrepancies between the CM and HoII models were possible depending on flock sizes used to model feeding rates. However, inferences derived from the HoII model, as used in the original work, were sound. While Holling's Type II and other purely prey-dependent models have fostered advances in wading bird foraging ecology, evaluating models that incorporate predator dependence could lead to a more adequate description of data and processes of interest. The mechanistic bases used to derive models used here lead to biologically interpretable results and advance understanding of wading bird foraging ecology.
Anyan, Jeffrey; Verwey, Michael; Amir, Shimon
2017-01-01
Disrupted circadian rhythms are a core feature of mood and anxiety disorders. Circadian rhythms are coordinated by a light-entrainable master clock located in the suprachiasmatic nucleus. Animal models of mood and anxiety disorders often exhibit blunted rhythms in locomotor activity and clock gene expression. Interestingly, the changes in circadian rhythms correlate with mood-related behaviours. Although animal models of depression and anxiety exhibit aberrant circadian rhythms in physiology and behavior, it is possible that the methodology being used to induce the behavioral phenotype (e.g., brain lesions, chronic stress, global gene deletion) affect behavior independently of circadian system. This study investigates the relationship between individual differences in circadian locomotor parameters and mood-related behaviors in healthy rats. The circadian phenotype of male Lewis rats was characterized by analyzing wheel running behavior under standard 12h:12h LD conditions, constant dark, constant light, and rate of re-entrainment to a phase advance. Rats were then tested on a battery of behavioral tests: activity box, restricted feeding, elevated plus maze, forced swim test, and fear conditioning. Under 12h:12h LD conditions, percent of daily activity in the light phase and variability in activity onset were associated with longer latency to immobility in the forced swim test. Variability in onset also correlated positively with anxiety-like behavior in the elevated plus maze. Rate of re-entrainment correlated positively with measures of anxiety in the activity box and elevated plus maze. Lastly, we found that free running period under constant dark was associated with anxiety-like behaviors in the activity box and elevated plus maze. Our results provide a previously uncharacterized relationship between circadian locomotor parameters and mood-related behaviors in healthy rats and provide a basis for future examination into circadian clock functioning and mood.
Hardgrove grindability index and petrology used as an enhanced predictor of coal feed rate
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hower, J.C.
1990-01-01
An improved predictor of coal pulverization behavior and coal feed rate is under development at the CAER based upon the interaction between Hardgrove Grindability Index (HGI) and coal petrology. With educated attention, this interaction may be a useful tool to enhance coal feed rates if cautiously extended to the mining environment where blends of coal lithotypes are produced.
Yun, Shumei; Liu, Qian; Mertzlufft, Kathy; Kruse, Catherine; White, Maggie; Fuller, Phyllis; Zhu, Bao-Ping
2010-02-01
To evaluate the effectiveness of the peer counselling (PC) programme on breast-feeding initiation among participants in the Special Supplemental Nutrition Program for Women, Infants, and Children (WIC) in Missouri, and to identify factors that facilitate breast-feeding initiation. We used the data from the 2006 Missouri Pregnancy Nutrition Surveillance System, Missouri Live Birth Records and the Missouri WIC programme to compare breast-feeding initiation rates between PC and non-PC agencies. We used multilevel logistic regression, with individual participants being nested within agencies, to control for individual- and agency-level characteristics. The breast-feeding initiation rate in PC agencies was significantly higher than in non-PC agencies among prenatal participants, but the difference was not significant among postpartum participants. After controlling for maternal sociodemographic characteristics, compared with prenatal cases in non-PC agencies, prenatal cases in PC agencies were more likely to initiate breast-feeding (OR = 1.21; 95 % CI 1.03, 1.43), whereas postpartum cases were less likely to initiate breast-feeding. Among prenatal participants in PC agencies, longer duration of prenatal WIC enrolment was associated with a higher rate of breast-feeding initiation. After adjusting for maternal sociodemographic characteristics and other agency-level characteristics, participants of PC agencies with an international board-certified lactation consultant were more likely to initiate breast-feeding than participants of PC agencies without such a consultant (OR = 1.21; 95 % CI 1.01, 1.45). Prenatal participation in the WIC breast-feeding PC programme (especially participation early during pregnancy) was associated with an increased rate of breast-feeding initiation in Missouri.
NASA Astrophysics Data System (ADS)
Nishimura, Shun; Ebitani, Kohki
2018-01-01
Development of a compact fast pyrolysis reactor constructed using Auger-type technology to afford liquid biofuel with high yield has been an interesting concept in support of local production for local consumption. To establish a widely useable module package, details of the performance of the developing compact module reactor were investigated. This study surveyed the properties of as-produced pyrolysis oil as a function of operation time, and clarified the recent performance of the developing compact fast pyrolysis reactor. Results show that after condensation in the scrubber collector, e.g. approx. 10 h for a 25 kg/h feedstock rate, static performance of pyrolysis oil with approximately 20 MJ/kg (4.8 kcal/g) calorific values were constantly obtained after an additional 14 h. The feeding speed of cedar chips strongly influenced the time for oil condensation process: i.e. 1.6 times higher feeding speed decreased the condensation period by half (approx. 5 h in the case of 40 kg/h). Increasing the reactor throughput capacity is an important goal for the next stage in the development of a compact fast pyrolysis reactor with Auger-type modules.
Optimize Short Term load Forcasting Anomalous Based Feed Forward Backpropagation
NASA Astrophysics Data System (ADS)
Mulyadi, Y.; Abdullah, A. G.; Rohmah, K. A.
2017-03-01
This paper contains the Short-Term Load Forecasting (STLF) using artificial neural network especially feed forward back propagation algorithm which is particularly optimized in order to getting a reduced error value result. Electrical load forecasting target is a holiday that hasn’t identical pattern and different from weekday’s pattern, in other words the pattern of holiday load is an anomalous. Under these conditions, the level of forecasting accuracy will be decrease. Hence we need a method that capable to reducing error value in anomalous load forecasting. Learning process of algorithm is supervised or controlled, then some parameters are arranged before performing computation process. Momentum constant a value is set at 0.8 which serve as a reference because it has the greatest converge tendency. Learning rate selection is made up to 2 decimal digits. In addition, hidden layer and input component are tested in several variation of number also. The test result leads to the conclusion that the number of hidden layer impact on the forecasting accuracy and test duration determined by the number of iterations when performing input data until it reaches the maximum of a parameter value.
LaPara, Timothy M; Klatt, Christian G; Chen, Ruoyu
2006-02-10
Membrane-coupled bioreactors (MBRs) offer substantial benefits compared to conventional reactor designs for biological wastewater treatment. MBR treatment efficiency, however, has not been optimized because the effects of the MBR on process microbiology are poorly understood. In this study, the structure and function of the microbial communities growing in MBRs fed simple synthetic wastewater were investigated. In four starch-fed MBRs, the bacterial community substantially increased its alpha-glucosidase affinity (>1000-fold), while the leucine aminopeptidase and heptanoate esterase affinities increased slightly (<40-fold) or remained relatively constant. Concomitant to these physiological adaptations, shifts in the bacterial community structure in two of the starch-fed MBRs were detected by PCR-DGGE. Four of the bacterial populations detected by PCR-DGGE were isolated and exhibited specific growth rates in batch culture ranging from 0.009 to 0.22 h(-1). Our results suggest that bacterial communities growing under increasingly stringent nutrient limitation adapt their enzyme activities primarily for the nutrients provided, but that there is also a more subtle response not linked to the substrates included in the feed medium. Our research also demonstrates that MBRs can support relatively complex bacterial communities even on simple feed media.
Production of FucoPol by Enterobacter A47 using waste tomato paste by-product as sole carbon source.
Antunes, Sílvia; Freitas, Filomena; Sevrin, Chantal; Grandfils, Christian; Reis, Maria A M
2017-03-01
Out-of-specification tomato paste, a by-product from the tomato processing industry, was used as the sole substrate for cultivation of the bacterium Enterobacter A47 and production of FucoPol, a value-added fucose-rich extracellular polysaccharide. Among the different tested fed-batch strategies, pH-stat, DO-stat and continuous substrate feeding, the highest production (8.77gL -1 ) and overall volumetric productivity (2.92gL -1 d -1 ) were obtained with continuous substrate feeding at a constant flow rate of 11gh -1 . The polymer produced had the typical FucoPol composition (37mol% fucose, 27mol% galactose, 23mol% glucose and 12mol% glucuronic acid, with an acyl groups content of 13wt%). The average molecular weight was 4.4×10 6 Da and the polydispersity index was 1.2. This study demonstrated that out-of-specification tomato paste is a suitable low-cost substrate for the production of FucoPol, thus providing a route for the valorization of this by-product into a high-value microbial product. Copyright © 2016 Elsevier Ltd. All rights reserved.
Fall field crickets did not acclimate to simulated seasonal changes in temperature.
Niehaus, Amanda C; Wilson, Robbie S; Storm, Jonathan J; Angilletta, Michael J
2012-02-01
In nature, many organisms alter their developmental trajectory in response to environmental variation. However, studies of thermal acclimation have historically involved stable, unrealistic thermal treatments. In our study, we incorporated ecologically relevant treatments to examine the effects of environmental stochasticity on the thermal acclimation of the fall field cricket (Gryllus pennsylvanicus). We raised crickets for 5 weeks at either a constant temperature (25°C) or at one of three thermal regimes mimicking a seasonal decline in temperature (from 25 to 12°C). The latter three treatments differed in their level of thermal stochasticity: crickets experienced either no diel cycle, a predictable diel cycle, or an unpredictable diel cycle. Following these treatments, we measured several traits considered relevant to survival or reproduction, including growth rate, jumping velocity, feeding rate, metabolic rate, and cold tolerance. Contrary to our predictions, the acclimatory responses of crickets were unrelated to the magnitude or type of thermal variation. Furthermore, acclimation of performance was not ubiquitous among traits. We recommend additional studies of acclimation in fluctuating environments to assess the generality of these findings.
Coordinating IMC-PID and adaptive SMC controllers for a PEMFC.
Wang, Guo-Liang; Wang, Yong; Shi, Jun-Hai; Shao, Hui-He
2010-01-01
For a Proton Exchange Membrane Fuel Cell (PEMFC) power plant with a methanol reformer, the process parameters and power output are considered simultaneously to avoid violation of the constraints and to keep the fuel cell power plant safe and effective. In this paper, a novel coordinating scheme is proposed by combining an Internal Model Control (IMC) based PID Control and adaptive Sliding Mode Control (SMC). The IMC-PID controller is designed for the reformer of the fuel flow rate according to the expected first-order dynamic properties. The adaptive SMC controller of the fuel cell current has been designed using the constant plus proportional rate reaching law. The parameters of the SMC controller are adaptively tuned according to the response of the fuel flow rate control system. When the power output controller feeds back the current references to these two controllers, the coordinating controllers system works in a system-wide way. The simulation results of the PEMFC power plant demonstrate the effectiveness of the proposed method. 2009 ISA. Published by Elsevier Ltd. All rights reserved.
To be Stiff or to be Soft-the Dilemma of the Echinoid Tooth Ligament. II. Mechanical Properties.
Birenheide, R; Tsuchi, A; Motokawa, T
1996-04-01
The teeth of sea urchins are connected to jaws by means of ligaments. Their sliding along the jaw during continuous growth requires a pliant ligament, whereas scraping on rocks for feeding requires a stiff ligament for firm support. We investigated the mechanical properties of the tooth ligament of Diadema setosum to clarify how sea urchins solve this dilemma. In creep tests a load of 30 g caused a shift of the tooth that continued until the tooth was pulled out of the jaw. The creep curve had three phases: an initial phase of high creep rate, a long phase of constant creep rate, and a final phase of accelerating creep rate. The ligaments had a shear viscosity of about 550 MPa {middot} s. Viscosity increased reversibly after stimulation with seawater containing a high concentration of potassium ions or acetylcholine. Frozen and rethawed ligaments did not show an increase of viscosity after stimulation. The data indicate that sea urchins can change the stiffness of their tooth ligaments through nervous control. We suggest that the tooth ligament is a catch connective tissue.
The vibrational dependence of dissociative recombination: Rate constants for N{sub 2}{sup +}
DOE Office of Scientific and Technical Information (OSTI.GOV)
Guberman, Steven L., E-mail: slg@sci.org
Dissociative recombination rate constants are reported with electron temperature dependent uncertainties for the lowest 5 vibrational levels of the N{sub 2}{sup +} ground state. The rate constants are determined from ab initio calculations of potential curves, electronic widths, quantum defects, and cross sections. At 100 K electron temperature, the rate constants overlap with the exception of the third vibrational level. At and above 300 K, the rate constants for excited vibrational levels are significantly smaller than that for the ground level. It is shown that any experimentally determined total rate constant at 300 K electron temperature that is smaller thanmore » 2.0 × 10{sup −7} cm{sup 3}/s is likely to be for ions that have a substantially excited vibrational population. Using the vibrational level specific rate constants, the total rate constant is in very good agreement with that for an excited vibrational distribution found in a storage ring experiment. It is also shown that a prior analysis of a laser induced fluorescence experiment is quantitatively flawed due to the need to account for reactions with unknown rate constants. Two prior calculations of the dissociative recombination rate constant are shown to be inconsistent with the cross sections upon which they are based. The rate constants calculated here contribute to the resolution of a 30 year old disagreement between modeled and observed N{sub 2}{sup +} ionospheric densities.« less
Evaluation of infiltration for the determination of palms water needs
NASA Astrophysics Data System (ADS)
Benlarbi, Dalila; Boutaoutaou, Djamel; Saggaï, Sofiane
2018-05-01
In arid climate conditions, irrigation water requirements increase, but available water resources are limited. And therefore the Saharan regions, large consumers of water can be seriously threatened if they do not make the necessary to become as parsimonious as allow the irrigation techniques whose technological aspect on their improvement has been privileged until now but all the problems are not solved. The objective of this work is to know the process of infiltration of water in the soil, i.e.: to try to determine exactly its value with obtaining the best combination (flow of entry, board length and irrigation time) in order to have a more or less uniform distribution in the soil and especially by avoiding significant water losses that would cause rise in the water table. The infiltration will allow us to calculate at any point the dose of water received that we will compare with the needs of the date palm. For this purpose; we varied the input flow for a constant board length. Then we varied the board length for a constant input rate. In both cases we varied the irrigation time according to the water requirements of the date palm. The flow remains of course constant during the entire feeding period. This study is primarily experimental and aims to meet practical applications but not immediately because it is necessary to continue the experiments with several other combinations to achieve practical results.
Su, Lin-Lin; Chong, Yap-Seng; Chan, Yiong-Huak; Chan, Yah-Shih; Fok, Doris; Tun, Kay-Thwe; Ng, Faith S P; Rauff, Mary
2007-09-22
To investigate whether antenatal breast feeding education alone or postnatal lactation support alone improves rates of exclusive breast feeding compared with routine hospital care. Randomised controlled trial. A tertiary hospital in Singapore. 450 women with uncomplicated pregnancies. Primary outcomes were rates of exclusive breast feeding at discharge from hospital and two weeks, six weeks, three months, and six months after delivery. Secondary outcomes were rates of any breast feeding. Compared with women who received routine care, women in the postnatal support group were more likely to breastfeed exclusively at two weeks (relative risk 1.82, 95% confidence interval 1.14 to 2.90), six weeks (1.85, 1.11 to 3.09), three months (1.87, 1.03 to 3.41), and six months (2.12, 1.03 to 4.37) postnatally. Women receiving antenatal education were more likely to breast feed exclusively at six weeks (1.73, 1.04 to 2.90), three months (1.92, 1.07 to 3.48), and six months (2.16, 1.05 to 4.43) postnatally. The numbers needed to treat to achieve one woman exclusively breast feeding at six months were 11 (6 to 80) for postnatal support and 10 (6 to 60) for antenatal education. Women who received postnatal support were more likely to exclusively or predominantly breast feed two weeks after delivery compared with women who received antenatal education (1.53, 1.01 to 2.31). The rate of any breastfeeding six weeks after delivery was also higher in the postnatal support group compared with women who received routine care (1.16, 1.02 to 1.31). Antenatal breast feeding education and postnatal lactation support, as single interventions based in hospital both significantly improve rates of exclusive breast feeding up to six months after delivery. Postnatal support was marginally more effective than antenatal education. Clinical Trials NCT00270920 [ClinicalTrials.gov].
Secor, Stephen M; Taylor, Josi R; Grosell, Martin
2012-01-01
Snakes exhibit an apparent dichotomy in the regulation of gastrointestinal (GI) performance with feeding and fasting; frequently feeding species modestly regulate intestinal function whereas infrequently feeding species rapidly upregulate and downregulate intestinal function with the start and completion of each meal, respectively. The downregulatory response with fasting for infrequently feeding snakes is hypothesized to be a selective attribute that reduces energy expenditure between meals. To ascertain the links between feeding habit, whole-animal metabolism, and GI function and metabolism, we measured preprandial and postprandial metabolic rates and gastric and intestinal acid-base secretion, epithelial conductance and oxygen consumption for the frequently feeding diamondback water snake (Nerodia rhombifer) and the infrequently feeding Burmese python (Python molurus). Independent of body mass, Burmese pythons possess a significantly lower standard metabolic rate and respond to feeding with a much larger metabolic response compared with water snakes. While fasting, pythons cease gastric acid and intestinal base secretion, both of which are stimulated with feeding. In contrast, fasted water snakes secreted gastric acid and intestinal base at rates similar to those of digesting snakes. We observed no difference between fasted and fed individuals for either species in gastric or intestinal transepithelial potential and conductance, with the exception of a significantly greater gastric transepithelial potential for fed pythons at the start of titration. Water snakes experienced no significant change in gastric or intestinal metabolism with feeding. Fed pythons, in contrast, experienced a near-doubling of gastric metabolism and a tripling of intestinal metabolic rate. For fasted individuals, the metabolic rate of the stomach and small intestine was significantly lower for pythons than for water snakes. The fasting downregulation of digestive function for pythons is manifested in a depressed gastric and intestinal metabolism, which selectively serves to reduce basal metabolism and hence promote survival between infrequent meals. By maintaining elevated GI performance between meals, fasted water snakes incur the additional cost of tissue activity, which is expressed in a higher standard metabolic rate.
Yoo, Yeong Du; Yoon, Eun Young; Jeong, Hae Jin; Lee, Kyung Ha; Hwang, Yeong Jong; Seong, Kyeong Ah; Kim, Jae Seong; Park, Jae Yeon
2013-01-01
Few protistan grazers feed on toxic dinoflagellates, and low grazing pressure on toxic dinoflagellates allows these dinoflagellates to form red-tide patches. We explored the feeding ecology of the newly described heterotrophic dinoflagellate Gyrodinium moestrupii when it fed on toxic strains of Alexandrium minutum, Alexandrium tamarense, and Karenia brevis and on nontoxic strains of A. tamarense, Prorocentrum minimum, and Scrippsiella trochoidea. Specific growth rates of G. moestrupii feeding on each of these dinoflagellates either increased continuously or became saturated with increasing mean prey concentration. The maximum specific growth rate of G. moestrupii feeding on toxic A. minutum (1.60/d) was higher than that when feeding on nontoxic S. trochoidea (1.50/d) or P. minimum (1.07/d). In addition, the maximum growth rate of G. moestrupii feeding on the toxic strain of A. tamarense (0.68/d) was similar to that when feeding on the nontoxic strain of A. tamarense (0.71/d). Furthermore, the maximum ingestion rate of G. moestrupii on A. minutum (2.6 ng C/grazer/d) was comparable to that of S. trochoidea (3.0 ng C/grazer/d). Additionally, the maximum ingestion rate of G. moestrupii on the toxic strain of A. tamarense (2.1 ng C/grazer/d) was higher than that when feeding on the nontoxic strain of A. tamarense (1.3 ng C/grazer/d). Thus, feeding by G. moestrupii is not suppressed by toxic dinoflagellate prey, suggesting that it is an effective protistan grazer of toxic dinoflagellates. © 2012 The Author(s) Journal of Eukaryotic Microbiology © 2012 International Society of Protistologists.
Duan, Yifan; Yang, Zhenyu; Lai, Jianqiang; Yu, Dongmei; Chang, Suying; Pang, Xuehong; Jiang, Shan; Zhang, Huanmei; Bi, Ye; Wang, Jie; Scherpbier, Robert W; Zhao, Liyun; Yin, Shian
2018-02-22
Appropriate infant and young child feeding could reduce morbidity and mortality and could improve cognitive development of children. However, nationwide data on exclusive breastfeeding and complementary feeding status in China are scarce. The aim of this study was to assess current exclusive breastfeeding and complementary feeding status in China. A national representative survey (Chinese National Nutrition and Health Survey) of children aged under 6 years was done in 2013. Stratified multistage cluster sampling was used to select study participants. World Health Organization (WHO) infant and young child feeding indicators were firstly used to assess exclusive breastfeeding and complementary feeding practice nationwide. In total, 14,458 children aged under two years (0 to <730 days) were studied from 55 counties in 30 provinces in China. The crude exclusive breastfeeding rate under 6 months was 20.7% (908/4381) and the weighted exclusive breastfeeding rate was 18.6%. The crude prevalence of minimum dietary diversity, minimum meal frequency and minimum acceptable diet were 52.5% (5286/10,071), 69.8% (7027/10,071), and 27.4% (2764/10,071) among children aged 6-23 months, respectively. The weighted rate was 53.7%, 69.1%, and 25.1%, respectively. Residential area, household income and maternal education were positively associated with the three complementary feeding indicators. The exclusive breastfeeding rate under 6 months was low and complementary feeding practice was not optimal in China. Residential area, household income and maternal education might be used to target infants and young children to improve complementary feeding practice.
Duan, Yifan; Yang, Zhenyu; Lai, Jianqiang; Yu, Dongmei; Chang, Suying; Pang, Xuehong; Jiang, Shan; Zhang, Huanmei; Bi, Ye; Wang, Jie; Scherpbier, Robert W.; Zhao, Liyun; Yin, Shian
2018-01-01
Appropriate infant and young child feeding could reduce morbidity and mortality and could improve cognitive development of children. However, nationwide data on exclusive breastfeeding and complementary feeding status in China are scarce. The aim of this study was to assess current exclusive breastfeeding and complementary feeding status in China. A national representative survey (Chinese National Nutrition and Health Survey) of children aged under 6 years was done in 2013. Stratified multistage cluster sampling was used to select study participants. World Health Organization (WHO) infant and young child feeding indicators were firstly used to assess exclusive breastfeeding and complementary feeding practice nationwide. In total, 14,458 children aged under two years (0 to <730 days) were studied from 55 counties in 30 provinces in China. The crude exclusive breastfeeding rate under 6 months was 20.7% (908/4381) and the weighted exclusive breastfeeding rate was 18.6%. The crude prevalence of minimum dietary diversity, minimum meal frequency and minimum acceptable diet were 52.5% (5286/10,071), 69.8% (7027/10,071), and 27.4% (2764/10,071) among children aged 6–23 months, respectively. The weighted rate was 53.7%, 69.1%, and 25.1%, respectively. Residential area, household income and maternal education were positively associated with the three complementary feeding indicators. The exclusive breastfeeding rate under 6 months was low and complementary feeding practice was not optimal in China. Residential area, household income and maternal education might be used to target infants and young children to improve complementary feeding practice. PMID:29470415
Calculation of kinetic rate constants from thermodynamic data
NASA Technical Reports Server (NTRS)
Marek, C. John
1995-01-01
A new scheme for relating the absolute value for the kinetic rate constant k to the thermodynamic constant Kp is developed for gases. In this report the forward and reverse rate constants are individually related to the thermodynamic data. The kinetic rate constants computed from thermodynamics compare well with the current kinetic rate constants. This method is self consistent and does not have extensive rules. It is first demonstrated and calibrated by computing the HBr reaction from H2 and Br2. This method then is used on other reactions.
Bredell, Helba; Smith, Jacques J; Görgens, Johann F; van Zyl, Willem H
2018-04-30
Cervical cancer is ranked the fourth most common cancer in women worldwide. Despite two commercially available prophylactic vaccines, it is unaffordable for most women in developing countries. We compared the optimized expression of monomers of the unique HPV type 16 L1-L2 chimeric protein (SAF) in two yeast strains of Pichia pastoris, KM71 (Mut s ) and GS115 (Mut + ), with Hansenula polymorpha NCYC 495 to determine the preferred host in bioreactors. SAF was uniquely created by replacing the h4 helix of the HPV-16 capsid L1 protein with a L2 peptide. Two different feeding strategies in fed-batch cultures of P. pastoris Mut s were evaluated: a predetermined feed rate versus feeding based on the oxygen consumption by maintaining constant dissolved oxygen levels (DO stat). All cultures showed a significant increase in biomass when methanol was fed using the DO stat method. In P. pastoris the SAF concentrations were higher in the Mut s strains than in the Mut + strains. However, H. polymorpha produced the highest level of SAF at 132.10 mg.L -1 culture while P. pastoris Mut s only produced 23.61 mg.L -1 . H. polymorpha showed greater potential for the expression of HPV-16 L1/L2 chimeric proteins despite the track record of P. pastoris as a high level producer of heterologous proteins. This article is protected by copyright. All rights reserved.
Long-term efficacy of a tongue tie service in improving breast feeding rates: A prospective study.
Billington, Jennifer; Yardley, Iain; Upadhyaya, Manasvi
2018-02-01
Breast feeding rates in England at 3months of age are approximately 17% for exclusive breast-feeding and 55% for breast-feeds supplemented with formula. Tongue-tie (TT) in infants is cited as a significant cause of difficulty with maintaining breast-feeding. Early treatment and support can improve breast-feeding and allow infants to benefit from the many long-term benefits of breast-feeding. Our aim was to determine BF rates in infants 3months after attending our tongue-tie clinic (TTC). Institutional ethical approval and study approval were obtained. Patients attending the TTC from May to July 2016 were included. Telephone contact was made 3months postprocedure to establish current behaviour. Symptom resolution was recorded as complete resolution (CR), moderate resolution (MoR), or minimal resolution (MiR). Feeding pattern was either exclusively BF or combined breast and formula feeds or exclusively formula fed. 100 infants were included with complete follow-up data on 87 (87% response rate). Median age at release of TT was 17 (2-88) days without any recurrence. Status at 3months was CR (n=70, 80%); MoR (n=13, 15%), and MiR (n=4, 5%). 43 (49%) were exclusively BF, 36 (41%) were supplementing BF with some formula (2/3 by choice and 1/3 owing to insufficient milk production), and 8 (10%) were using only formula milk (7 by choice and 2 owing to ongoing feeding difficulties). Of the 17 mothers still experiencing symptoms, 5 were exclusively breast-feeding, and 8 were persisting with combined feeds. Infants attending our tongue-tie clinic achieved both higher exclusive breastfeeding and combined breast and bottle-feeding when compared to national breast-feeding data at 3months of age. This can facilitate the achievement of long-term breastfeeding, exposing infants and mothers to many of the associated benefits. 4. Copyright © 2017 Elsevier Inc. All rights reserved.
Mass balance of polychlorinated biphenyls and other organochlorine compounds in a lactating cow
DOE Office of Scientific and Technical Information (OSTI.GOV)
McLachlan, M.S.
1993-03-01
A contaminant mass balance was conducted of a lactating cow in its natural state. PCBs, HDHs, DDE, DDT, HCB, and several other chlorinated substances were investigated. It was found that virtually all of the cow's exposure was through feed. The contaminant absorption in the cow and hence the carry-over rate of persistent compounds was found to be a function of K[sub ow], with approximately constant values up to a log K[sub ow] of 6.5 and thereafter rapidly decreasing absorption with increasing lipophilicity of the contaminant. The key to PCB persistence in the cow was the 4,4[prime] substitution pattern. The 2,3,5more » substitution was a less effective hindrance for PCB metabolism. 33 refs., 2 figs., 7 tabs.« less
Reduced Rift Valley fever virus infection rates in mosquitoes associated with pledget feedings.
Turell, M J
1988-12-01
Infection rates were compared in Culex pipiens and Aedes taeniorhynchus after they fed on Rift Valley fever (RVF) viremic hamsters or ingested similar doses of RVF virus from blood-soaked pledgets. Infection rates were significantly lower for mosquitoes that ingested virus from a pledget than for those that ingested similar doses from viremic hamsters. The method used to prevent normal clot formation for the pledget feedings (i.e., defibrination by shaking with glass beads or addition of heparin) did not affect subsequent infection rates. Both inhibition of normal clot formation and freezing of virus after it had last been propagated were associated with significantly reduced infection rates with the pledget feedings. Laboratory studies using artificial feeding techniques may not give reliable estimates of the vector competence of mosquitoes for arboviruses.
Postpartum weight loss and infant feeding.
Haiek, L N; Kramer, M S; Ciampi, A; Tirado, R
2001-01-01
Women are often advised that lactation accelerates loss of the excess weight gained during pregnancy, but the evidence underlying this advice is sparse and conflicting. To help fill this gap, we assessed differences in the rate of postpartum weight loss in the first 9 months postpartum according to method of infant feeding. Two hundred thirty-six women attending two public health clinics in Montreal were weighed in one to four routine infant immunization visits up to the 9th postpartum month. After each weighing, we administered a telephone questionnaire assessing the method of infant feeding (predominantly breast-feeding, mixed-feeding, or predominantly bottle-feeding) and potential confounders. Data were analyzed using unbalanced multivariate repeated measures linear regression. Infant feeding was not associated with statistically significant differences in the rate of weight loss. Gestational weight gain, postpartum smoking, and maternal birthplace were important predictors of postpartum weight change. Although our results cannot exclude an effect of more exclusive or more prolonged breast-feeding, breast-feeding as commonly practiced does not appear to influence the rate of postpartum weight loss. This information should be useful in counseling new or prospective mothers and in avoiding unrealistic expectations.
Dereddy, Narendra R; Talati, Ajay J; Smith, Ashley; Kudumula, Ravi; Dhanireddy, Ramasubbareddy
2015-02-01
Breast milk feeding has advantages over formula feeding in premature infants, but its use in them is low. We initiated measures in our inner-city hospital such as starting a dedicated lactation service, counseling the mothers prenatally and postnatally, educating hospital staff, and advocating with our state's Medicaid insurance to provide free home breast pumps. These measures were associated with improvement in our breast milk feeding rates in very low birth weight infants from 22% to 88% over 5 years. This article describes our multipronged approach and can help encourage and guide other units with similar demographics to improve their breast milk feeding rates. © The Author(s) 2014.
Co-regulated Approach to Feeding Preterm Infants with Lung Disease: Effects During Feeding
Thoyre, Suzanne M.; Holditch-Davis, Diane; Schwartz, Todd A.; Melendez Roman, Carlos R.; Nix, William
2015-01-01
Background Very preterm infants are at risk for poor oral feeding endurance, early cessation of eating, poor fluid management with aspiration risk, behavioral distress, and unstable heart rate and oxygenation during feeding. Objective To determine the preliminary effectiveness of a Co-Regulated Approach (CoReg) to oral feeding for very preterm infants at risk for lung disease. Method A randomized, within-subjects, cross-over design was used with 20 very preterm infants requiring oxygen at the start of oral feeding. Infants were bottle fed by the Usual Care approach and by the CoReg approach on 2 consecutive days for an average of four feedings each. Intervention components included co-regulation of suck, swallow, and breathe rhythms using enhanced auditory assessment, infant-guided feeding onsets, and infant positioning in a semielevated, side-lying position. Infant physiology metrics (heart rate, SaO2) were collected continuously prior to and during the feeding. Behavioral and auditory indicators of regulation were coded continuously from videotape during the feeding. Results Seventy feedings were analyzed (38 Usual Care, 32 CoReg) using repeated measures modeling. CoReg feedings were characterized by more frequent preparation of the infant for the feeding, were more commonly initiated in response to infant readiness cues, had more rest periods and breath regulation events, and had fewer sucking stimulation events. CoReg feedings had less SaO2 variability, decline, and time spent in a desaturated state; less heart rate fluctuation and decline; less behavioral disorganization; better fluid management; and less observed effort to breathe. Discussion Support is provided for a co-regulated approach to feeding vulnerable infants. Enhanced auditory assessment of infant feeding rhythms increases the responsiveness of the feeder and improves infant behavioral and physiologic responses. PMID:22565102
NASA Astrophysics Data System (ADS)
Wahid, A.; Prasetyo, A. P.
2018-03-01
This study describes the selection of controllers in the vacuum distillation unit (VDU) between a model predictive control (MPC) and a proportional-integral (PI) controller by comparing the integral square error (ISE) values. Design of VDU in this simulation is based on modified Metso Automation Inc. scheme. Controlled variables in this study are feed flow rate, feed temperature, top stage pressure, condenser level, bottom stage temperature, LVGO (light vacuum gas oil), MVGO (medium vacuum gas oil), and HVGO (heavy vacuum gas oil) flow rate. As a result, control performance improvements occurred as using MPC compared to PI controllers, when testing a set-point change, of feed flow rate control, feed temperature, top-stage pressure, bottom-stage temperature and flow rate of LVGO, MVGO, and HVGO, respectively, 36%, 6%, 92%, 53%, 90%, 96% and 88%. Only on condenser level control PI performs much better than the MPC. So PI controller is used for level condenser control. While for the test of disturbance rejection, by changing feed flow rate by 10%, there is improvement of control performance using MPC compared to PI controller on feed temperature control, top-stage pressure, bottom-stage temperature and flow rate LVGO, MVGO and HVGO 0.3%, 0.7%, 14%, 2.7%, 10.6% and 4.3%, respectively.
Sheridan, Robert L; Prelack, Kathrina; Yu, Yong-Ming; Lydon, Martha; Petras, Lisa; Young, Vernon R; Tompkins, Ronald G
2004-06-01
Glutamine is a nonessential amino acid that, in recent years, has been found to play important roles in several metabolic and immunologic processes. It has been theorized that, in a stressed state, it may become "conditionally essential" because the patient's ability to manufacture glutamine may not be adequate to meet their needs under this condition. We chose to evaluate the ability of 48 hours of enteral glutamine to enhance immediate nitrogen accretion in stressed pediatric burn patients. Nine children with serious burns who were tolerating tube feedings were enrolled in a human studies committee-approved protocol in which they received 48 hours of enteral feedings with glutamine replacing 20% of essential and nonessential amino acids and 48 hours of isonitrogenous, isocaloric standard enteral feedings. This interval was chosen to help ensure that the study periods were comparable from a metabolic perspective. At the end of each period, protein kinetics were determined by a primed constant infusion of L-[1-(13)C] leucine tracer. The order of the studies was randomized. Seven children completed both phases of the study. Results were compared by paired t test and are presented as mean +/- standard error of the mean. During the glutamine feeding period, the leucine flux and leucine oxidation rate were significantly lower than those in the conventional feeding period. This reflects a reduction in total leucine intake from 80 +/- 11 to 62 +/- 10 micromol/kg per hour. However, there was no significant difference in the net balance of leucine accretion into proteins between these 2 dietary periods, which indicated that enriched glutamine feeding for 48 hours did not result in an immediate whole body protein gain in this group of pediatric patients. In addition, plasma glutamine concentration showed a moderate increase after 48 hours of supplementation but did not reach significance. Rapid protein accretion does not occur with short-term enteral glutamine supplementation. Several days of glutamine supplementation may be required to restore plasma glutamine levels and stimulate protein synthesis.
Makwana, J P; Joshi, Asim Kumar; Athawale, Gaurav; Singh, Dharminder; Mohanty, Pravakar
2015-02-01
An experimental study of air gasification of rice husk was conducted in a bench-scale fluidized bed gasifier (FBG) having 210 mm diameter and 1600 mm height. Heating of sand bed material was performed using conventional charcoal fuel. Different operating conditions like bed temperature, feeding rate and equivalence ratio (ER) varied in the range of 750-850 °C, 25-31.3 kg/h, and 0.3-0.38, respectively. Flow rate of air was kept constant (37 m(3)/h) during FBG experiments. The carbon conversion efficiencies (CCE), cold gas efficiency, and thermal efficiency were evaluated, where maximum CCE was found as 91%. By increasing ER, the carbon conversion efficiency was decreased. Drastic reduction in electric consumption for initial heating of gasifier bed with charcoal compared to ceramic heater was ∼45%. Hence rice husk is found as a potential candidate to use directly (without any processing) in FBG as an alternative renewable energy source from agricultural field. Copyright © 2014 Elsevier Ltd. All rights reserved.
NASA Astrophysics Data System (ADS)
Ratriyanto, A.; Indreswari, R.; Nuhriawangsa, A. M. P.; Purwanti, E.
2018-03-01
The study was conducted to evaluate the feed efficiency of quail diets containing different concentrations of metabolizable energy (ME) and crude protein (CP) with constant ratio and supplemented with methionine. Four hundred laying quails (Coturnix coturnix japonica) were randomly assigned to four experimental diets in a 2×2 factorial arrangement. Each dietary treatment used 5 replicates of 20 quails. Two basal diets were formulated to contain 2,800 kcal kg-1 ME and 18.7% CP (High ME-CP) and 2,600 kcal kg-1 ME and 17.3% CP (Low ME-CP). Each basal diet was supplemented with 0 and 0.12% methionine. The High ME-CP diets generated lower feed consumption but higher egg mass and feed efficiency (P<0.01) compared with the Low ME-CP. Furthermore, supplementation of methionine increased egg mass, feed efficiency, energy efficiency ratio and protein efficiency ratio (P<0.01). The High ME-CP supplemented with methionine resulted the highest feed efficiency followed by the Low ME-CP supplemented with methionine, while both High ME-CP and Low ME-CP without methionine supplementation resulted the lowest feed efficiency (P<0.05). In addition, ME and CP consumption of the birds were not influenced by the treatments. Thus, feeding High ME-CP supplemented with 0.12% methionine provided benefit to improve the feed efficiency in laying quails.
Land Use, Macroalgae, and a Tumor-Forming Disease in Marine Turtles
Van Houtan, Kyle S.; Hargrove, Stacy K.; Balazs, George H.
2010-01-01
Wildlife diseases are an increasing concern for endangered species conservation, but their occurrence, causes, and human influences are often unknown. We analyzed 3,939 records of stranded Hawaiian green sea turtles (Chelonia mydas) over 28 years to understand fibropapillomatosis, a tumor-forming disease linked to a herpesvirus. Turtle size is a consistent risk factor and size-standardized models revealed considerable spatial and temporal variability. The disease peaked in some areas in the 1990s, in some regions rates remained constant, and elsewhere rates increased. Land use, onshore of where the turtles feed, may play a role. Elevated disease rates were clustered in watersheds with high nitrogen-footprints; an index of natural and anthropogenic factors that affect coastal eutrophication. Further analysis shows strong epidemiological links between disease rates, nitrogen-footprints, and invasive macroalgae and points to foraging ecology. These turtles now forage on invasive macroalgae, which can dominate nutrient rich waters and sequester environmental N in the amino acid arginine. Arginine is known to regulate immune activity, promote herpesviruses, and contribute to tumor formation. Our results have implications for understanding diseases in aquatic organisms, eutrophication, herpesviruses, and tumor formation. PMID:20927370
Calories and gastric emptying: a regulatory capacity with implications for feeding.
McHugh, P R; Moran, T H
1979-05-01
Gastric emptying in four unanesthetized male Macaca mulatta was studied with the serial test meal method of Hunt and Spurrell. Liquid meals were infused into the stomach through a chronic indwelling Silastic cannula. Saline meals empty rapidly and exponentially. Doubling the volume of saline from 150 to 300 ml increased the emptying rate so that the half-life remained unchanged (15 min). The 150-ml glucose meals (0.05, 0.125, and 0.25 g/ml) emptied more slowly than saline, progressively more slowly with increasing concentrations (0.05--1.8, 0.125--0.78, and 0.25--0.37 ml/min) and linearly through most of their course. Doubling the volume of 0.125 g/ml-glucose meal did not change the rate of emptying. Converting grams of glucose to their caloric content, the emptying rate in kcal/min becomes constant (approx 0.4 kcal/min) in this range of concentrations. Isocaloric casein hydrolysate and medium-chain triglyceride oil meals at 0.5 kcal/ml empty at the same rate as glucose. The precision of this regulation is sufficient to give it a role in preabsorptive satiety and the control of caloric intake.
Consumer-based optimization of a third-generation product made from peanut and rice flour.
Choi, I-D; Phillips, R D; Resurreccion, A V A
2007-09-01
Indirectly puffed snacks were produced by an extrusion process with partially defatted (12% fat) peanut flour (30%, 40%, 50%) at different levels of screw speed (200, 300, 400 rpm) and feed rate (4, 5, 6 kg/h). Extrudates were dried to obtain half-products (11% to 12% MC) followed by puffing with deep-fat frying. The puffed snack prototypes were subjected to consumer acceptance test. Consumers rated higher than 6.0 (= like slightly) for all products produced within the experimental factor ranges on the attributes of crispness and texture, whereas consumer scores for appearance, color, flavor, and overall liking were lower than 6.0 for the product containing 50% peanut flour regardless of screw speed and feed rate. The product extruded with 50% peanut flour at screw speed of 400 rpm and feed rate of 6 kg/h received the lowest score of 5.5 on overall liking in a 9-point hedonic score. Predicted regression models indicated that feed rate had the largest effect on consumer attributes followed by peanut flour and screw speed. From the superimposed contour plot of individual contour plot of consumer attributes, the optimum region was identified as the area beginning at the 42.0% to 43.0% peanut flour and 4.0 kg/h feed rates, rising to a maximum at 45% peanut flour and 4.6 kg/h feed rates and decreasing to the 33.0% to 34.0% peanut flour and 6.0 kg/h feed rates. Verification confirmed the ability of predictive regression models to identify peanut-based snacks, which would be scored higher than 6.0 by consumer evaluation.
Feed rate measuring method and system
Novak, J.L.; Wiczer, J.J.
1995-12-05
A system and method are provided for establishing the feed rate of a workpiece along a feed path with respect to a machine device. First and second sensors each having first and second sensing electrodes which are electrically isolated from the workpiece are positioned above, and in proximity to the desired surfaces of the workpiece along a feed path. An electric field is developed between the first and second sensing electrodes of each sensor and capacitance signals are developed which are indicative of the contour of the workpiece. First and second image signals representative of the contour of the workpiece along the feed path are developed by an image processor. The time delay between corresponding portions of the first and second image signals are then used to determine the feed rate based upon the separation of the first and second sensors and the amount of time between corresponding portions of the first and second image signals. 18 figs.
Feed rate measuring method and system
Novak, James L.; Wiczer, James J.
1995-01-01
A system and method are provided for establishing the feed rate of a workpiece along a feed path with respect to a machine device. First and second sensors each having first and second sensing electrodes which are electrically isolated from the workpiece are positioned above, and in proximity to the desired surfaces of the workpiece along a feed path. An electric field is developed between the first and second sensing electrodes of each sensor and capacitance signals are developed which are indicative of the contour of the workpiece. First and second image signals representative of the contour of the workpiece along the feed path are developed by an image processor. The time delay between corresponding portions of the first and second image signals are then used to determine the feed rate based upon the separation of the first and second sensors and the amount of time between corresponding portions of the first and second image signals.
Mukhtasimova, Nuriya; daCosta, Corrie J.B.
2016-01-01
The acetylcholine receptor (AChR) from vertebrate skeletal muscle initiates voluntary movement, and its kinetics of activation are crucial for maintaining the safety margin for neuromuscular transmission. Furthermore, the kinetic mechanism of the muscle AChR serves as an archetype for understanding activation mechanisms of related receptors from the Cys-loop superfamily. Here we record currents through single muscle AChR channels with improved temporal resolution approaching half an order of magnitude over our previous best. A range of concentrations of full and partial agonists are used to elicit currents from human wild-type and gain-of-function mutant AChRs. For each agonist–receptor combination, rate constants are estimated from maximum likelihood analysis using a kinetic scheme comprised of agonist binding, priming, and channel gating steps. The kinetic scheme and rate constants are tested by stochastic simulation, followed by incorporation of the experimental step response, sampling rate, background noise, and filter bandwidth. Analyses of the simulated data confirm all rate constants except those for channel gating, which are overestimated because of the established effect of noise on the briefest dwell times. Estimates of the gating rate constants were obtained through iterative simulation followed by kinetic fitting. The results reveal that the agonist association rate constants are independent of agonist occupancy but depend on receptor state, whereas those for agonist dissociation depend on occupancy but not on state. The priming rate and equilibrium constants increase with successive agonist occupancy, and for a full agonist, the forward rate constant increases more than the equilibrium constant; for a partial agonist, the forward rate and equilibrium constants increase equally. The gating rate and equilibrium constants also increase with successive agonist occupancy, but unlike priming, the equilibrium constants increase more than the forward rate constants. As observed for a full and a partial agonist, the gain-of-function mutation affects the relationship between rate and equilibrium constants for priming but not for channel gating. Thus, resolving brief single channel currents distinguishes priming from gating steps and reveals how the corresponding rate and equilibrium constants depend on agonist occupancy. PMID:27353445
Zeilinger, Adam R; Olson, Dawn M; Andow, David A
2014-08-01
Consumer feeding preference among resource choices has critical implications for basic ecological and evolutionary processes, and can be highly relevant to applied problems such as ecological risk assessment and invasion biology. Within consumer choice experiments, also known as feeding preference or cafeteria experiments, measures of relative consumption and measures of consumer movement can provide distinct and complementary insights into the strength, causes, and consequences of preference. Despite the distinct value of inferring preference from measures of consumer movement, rigorous and biologically relevant analytical methods are lacking. We describe a simple, likelihood-based, biostatistical model for analyzing the transient dynamics of consumer movement in a paired-choice experiment. With experimental data consisting of repeated discrete measures of consumer location, the model can be used to estimate constant consumer attraction and leaving rates for two food choices, and differences in choice-specific attraction and leaving rates can be tested using model selection. The model enables calculation of transient and equilibrial probabilities of consumer-resource association, which could be incorporated into larger scale movement models. We explore the effect of experimental design on parameter estimation through stochastic simulation and describe methods to check that data meet model assumptions. Using a dataset of modest sample size, we illustrate the use of the model to draw inferences on consumer preference as well as underlying behavioral mechanisms. Finally, we include a user's guide and computer code scripts in R to facilitate use of the model by other researchers.
Alperovich, Michael; Frey, Jordan D; Shetye, Pradip R; Grayson, Barry H; Vyas, Raj M
2017-05-01
Our study goal was to evaluate the rates of breast milk feeding among patients with oral clefts at a large North American Craniofacial Center. Parents of patients with oral clefts born from 2000 to 2012 and treated at our center were interviewed regarding cleft diagnosis, counseling received for feeding, and feeding habits. Data were obtained from parents of 110 patients with oral clefts. Eighty-four percent of parents received counseling for feeding a child with a cleft. Sixty-seven percent of patients received breast milk for some period of time with a mean duration of 5.3 months (range 0.25 to 18 months). When used, breast milk constituted the majority of the diet with a mean percentage of 75%. Breast milk feeding rates increased successively over the 13-year study period. The most common method of providing breast milk was the Haberman feeder at 75% with other specialty cleft bottles composing an additional 11%. Parents who received counseling were more likely to give breast milk to their infant (P = .02). Duration of NasoAlveolar Molding prior to cleft lip repair did not affect breast milk feeding length (P = .72). Relative to patients with cleft lip and palate, patients with isolated cleft lip had a breast milk feeding odds ratio of 1.71. We present breast milk feeding in the North American cleft population. Although still lower than the noncleft population, breast milk feeding with regards to initiation rate, length of time, and proportion of total diet is significantly higher than previously reported.
Song, Bo; Sanborn, Brett
2018-05-07
In this paper, a Johnson–Cook model was used as an example to analyze the relationship of compressive stress-strain response of engineering materials experimentally obtained at constant engineering and true strain rates. There was a minimal deviation between the stress-strain curves obtained at the same constant engineering and true strain rates. The stress-strain curves obtained at either constant engineering or true strain rates could be converted from one to the other, which both represented the intrinsic material response. There is no need to specify the testing requirement of constant engineering or true strain rates for material property characterization, provided that eithermore » constant engineering or constant true strain rate is attained during the experiment.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Song, Bo; Sanborn, Brett
In this paper, a Johnson–Cook model was used as an example to analyze the relationship of compressive stress-strain response of engineering materials experimentally obtained at constant engineering and true strain rates. There was a minimal deviation between the stress-strain curves obtained at the same constant engineering and true strain rates. The stress-strain curves obtained at either constant engineering or true strain rates could be converted from one to the other, which both represented the intrinsic material response. There is no need to specify the testing requirement of constant engineering or true strain rates for material property characterization, provided that eithermore » constant engineering or constant true strain rate is attained during the experiment.« less
Mbuthia, Jackson Mwenda; Rewe, Thomas Odiwuor; Kahi, Alexander Kigunzu
2015-02-01
This study estimated economic values for production traits (dressing percentage (DP), %; live weight for growers (LWg), kg; live weight for sows (LWs), kg) and functional traits (feed intake for growers (FEEDg), feed intake for sow (FEEDs), preweaning survival rate (PrSR), %; postweaning survival (PoSR), %; sow survival rate (SoSR), %, total number of piglets born (TNB) and farrowing interval (FI), days) under different smallholder pig production systems in Kenya. Economic values were estimated considering two production circumstances: fixed-herd and fixed-feed. Under the fixed-herd scenario, economic values were estimated assuming a situation where the herd cannot be increased due to other constraints apart from feed resources. The fixed-feed input scenario assumed that the herd size is restricted by limitation of feed resources available. In addition to the tradition profit model, a risk-rated bio-economic model was used to derive risk-rated economic values. This model accounted for imperfect knowledge concerning risk attitude of farmers and variance of input and output prices. Positive economic values obtained for traits DP, LWg, LWs, PoSR, PrSR, SoSR and TNB indicate that targeting them in improvement would positively impact profitability in pig breeding programmes. Under the fixed-feed basis, the risk-rated economic values for DP, LWg, LWs and SoSR were similar to those obtained under the fixed-herd situation. Accounting for risks in the EVs did not yield errors greater than ±50 % in all the production systems and basis of evaluation meaning there would be relatively little effect on the real genetic gain of a selection index. Therefore, both traditional and risk-rated models can be satisfactorily used to predict profitability in pig breeding programmes.
NASA Astrophysics Data System (ADS)
Bezhenar, Roman; Jung, Kyung Tae; Maderich, Vladimir; Willemsen, Stefan; de With, Govert; Qiao, Fangli
2016-05-01
After the earthquake and tsunami on 11 March 2011 damaged the Fukushima Dai-ichi Nuclear Power Plant (FDNPP), an accidental release of a large amount of radioactive isotopes into both the air and the ocean occurred. Measurements provided by the Japanese agencies over the past 5 years show that elevated concentrations of 137Cs still remain in sediments, benthic organisms, and demersal fishes in the coastal zone around the FDNPP. These observations indicate that there are 137Cs transfer pathways from bottom sediments to the marine organisms. To describe the transfer quantitatively, the dynamic food chain biological uptake model of radionuclides (BURN) has been extended to include benthic marine organisms. The extended model takes into account both pelagic and benthic marine organisms grouped into several classes based on their trophic level and type of species: phytoplankton, zooplankton, and fishes (two types: piscivorous and non-piscivorous) for the pelagic food chain; deposit-feeding invertebrates, demersal fishes fed by benthic invertebrates, and bottom omnivorous predators for the benthic food chain; crustaceans, mollusks, and coastal predators feeding on both pelagic and benthic organisms. Bottom invertebrates ingest organic parts of bottom sediments with adsorbed radionuclides which then migrate up through the food chain. All organisms take radionuclides directly from water as well as food. The model was implemented into the compartment model POSEIDON-R and applied to the north-western Pacific for the period of 1945-2010, and then for the period of 2011-2020 to assess the radiological consequences of 137Cs released due to the FDNPP accident. The model simulations for activity concentrations of 137Cs in both pelagic and benthic organisms in the coastal area around the FDNPP agree well with measurements for the period of 2011-2015. The decrease constant in the fitted exponential function of simulated concentration for the deposit-feeding invertebrates (0.45 yr-1) is close to the observed decrease constant in sediments (0.44 yr-1). These results strongly indicate that the gradual decrease of activity in demersal fish (decrease constant is 0.46 yr-1) is caused by the transfer of activity from organic matter deposited in bottom sediment through the deposit-feeding invertebrates. The estimated model transfer coefficient from bulk sediment to demersal fish in the model for 2012-2020 (0.13) is larger than that to the deposit-feeding invertebrates (0.07). In addition, the transfer of 137Cs through food webs for the period of 1945-2020 has been modelled for the Baltic Sea contaminated due to global fallout and from the Chernobyl accident. The model simulation results obtained with generic parameters are also in good agreement with available measurements in the Baltic Sea. Unlike the open coastal system where the FDNPP is located, the dynamics of radionuclide transfer in the Baltic Sea reach a quasi-steady state due to the slow rate in water mass exchange in this semi-enclosed basin. Obtained results indicate a substantial contribution of the benthic food chain in the long-term transfer of 137Cs from contaminated bottom sediments to marine organisms and the potential application of a generic model in different regions of the world's oceans.
Tarrant, Roslyn C; Younger, Katherine M; Sheridan-Pereira, Margaret; White, Martin J; Kearney, John M
2010-06-01
To assess breast-feeding initiation and prevalence from birth to 6 months in a sample of mothers in Dublin, and to determine the factors associated with breast-feeding initiation and 'any' breast-feeding at 6 weeks in a sample of Irish-national mothers. This prospective cross-sectional study involved the recruitment of women during the antenatal period, with subsequent follow-up of mothers who delivered healthy, term singleton infants, at 6 weeks and 6 months postpartum. Participants were recruited from antenatal clinics in the Coombe Women and Infants University Hospital, Dublin. In all, 401 Irish-national and forty-nine non-Irish-national mothers met the criteria for inclusion in the present study. Breast-feeding initiation rates of the Irish-national and non-Irish-nationals were 47% and 79.6%, respectively. Factors that were significantly (P = 0.000) associated with both breast-feeding initiation and 'any' breast-feeding at 6 weeks included mothers who were >or=35 years, educated to third level, reported positive postnatal encouragement to breast-feed from their partners and had a positive antenatal intention to breast-feed. The maternal negative perception that breast-feeding is an embarrassing way to feed an infant was demonstrated as a major barrier to initiation. Breast-feeding initiation and prevalence rates of the Irish-national population remain low and lag considerably behind national and international targets. Inclusion of the partner in breast-feeding promotional initiatives during the antenatal period may be crucial to increase breast-feeding rates in Ireland. Public health campaigns that focus on increasing the social acceptability of breast-feeding may prove effective in addressing this cultural barrier.
Cusack, P M V
2008-01-01
To examine the effects of a dietary humic and fulvic acid complex, FeedMAX 15, on the health, growth rate, feed conversion ratio, and carcase characteristics of feedlot cattle. Cattle, in eight pens of 125 animals each, were fed either a diet containing a humic and fulvic acid complex (FeedMAX 15, FeedMAX Industries, Toowoomba, Queensland) or the same diet without the additive. Control or FeedMAX 15 diets were allocated to each pen at random. Individual cattle were allocated alternately to control or treatment pens based on order of presentation. Comparisons of disease incidence, mortality, feed intake, growth rate, feed conversion ratio, fat depth, dressing percentage, meat colour, fat colour and marbling were made at the conclusion of the feeding period. No differences were found between cattle fed FeedMAX 15 and cattle not fed the additive in entry body weight (P = 0.99), exit body weight (P = 0.91), dressing percentage (P = 0.66), P8 fat depth (P = 0.57), meat colour (P = 0.67), marbling (P = 0.70), all diseases (P = 0.64), bovine respiratory disease (P = 0.91), or mortalities (P = 1.0). Cattle fed FeedMAX 15 reached the market specifications for body weight and fat depth in fewer mean days (P = 0.0001), had a greater average daily gain (P = 0.05), a lower feed conversion ratio (P = 0.05) and whiter fat (P < 0.0001). Feeding the humic and fulvic acid complex, FeedMAX 15, at 0.055 g per kg body weight per day, can increase growth rate and feed conversion efficiency in feedlot cattle.
Early development and the point of no return in pikeperch ( Sander lucioperca L.) larvae
NASA Astrophysics Data System (ADS)
Xu, Zhengchao; Li, Caijuan; Ling, Qufei; Gaughan, Sarah; Wang, Guocheng; Han, Xiaofei
2017-11-01
The objectives of the present study were to evaluate the yolk-sac and oil globule absorption and point of no return (PNR) of pikeperch ( Sander lucioperca L.) larvae. Artificial propagation of pikeperch was performed at (15±2)°C. Yolk-sac absorption, oil globule absorption, larval growth and the first initial feeding rate were observed to analyze the early growth and to determine the PNR of pikeperch larvae. The total length of newly hatched (0 day after hatching, DAH) pikeperch larvae was (4.25±0.22) mm and the volume of the yolk-sac and the oil globule was (0.30±0.12) mm3 and (5.14±2.28) 10-2 mm3 respectively. The yolk-sac and the oil globule were exhausted at 11 DAH and 14 DAH, respectively. Pikeperch larvae began feeding at 8 DAH with an initial feeding rate about 10.0%. From 9 to 14 DAH, the initial feeding rate increased rapidly, and reached its highest (about 82.7%) at 14 DAH. It declined thereafter, 48.9% at 15 DAH and 35.6% at 16 DAH, thus the pikeperch larvae reached PNR by 15-16 DAH. The appropriate first feeding time for the pikeperch larvae is 11-12 DAH, when the initial feeding rate is higher than half of the maximum initial feeding rate.
Good breastfeeding policies -- good breastfeeding rates.
1998-01-01
In Norway, where breast-feeding policies protecting breast-feeding women's needs have been in place since the 1970s, approximately 97% of women breast feed when leaving the hospital, 80% are breast feeding at 3 months, and 20% beyond 12 months. Government family policies play an important role in enabling women to achieve good breast-feeding rates. In Norway: maternity leave is 42 weeks with full pay or 52 weeks with 80% of salary; flexible part-time is available for women from 2 months after giving birth with income supplemented from maternity benefits; after returning to work, women are entitled to 1- to 1.5-hour breaks to return home to breast feed, or to have the child brought to work. "Breast feeding is so normal," writes Hege Jacobson Lepri, "it's more embarrassing to bring out the feeding bottle in public." full text
Price, Edwin R; Sirsat, Tushar S; Sirsat, Sarah K G; Kang, Gurdeep; Keereetaweep, Jantana; Aziz, Mina; Chapman, Kent D; Dzialowski, Edward M
2017-08-01
We investigated the ability of juvenile American alligators (Alligator mississippiensis) to acclimate to temperature with respect to growth rate. We hypothesized that alligators would acclimate to cold temperature by increasing the metabolic capacity of skeletal muscles and the heart. Additionally, we hypothesized that lipid membranes in the thigh muscle and liver would respond to low temperature, either to maintain fluidity (via increased unsaturation) or to maintain enzyme reaction rates (via increased docosahexaenoic acid). Alligators were assigned to one of 3 temperature regimes beginning at 9 mo of age: constant warm (30°C), constant cold (20°C), and daily cycling for 12h at each temperature. Growth rate over the following 7 mo was highest in the cycling group, which we suggest occurred via high digestive function or feeding activity during warm periods and energy-saving during cold periods. The warm group also grew faster than the cold group. Heart and liver masses were proportional to body mass, while kidney was proportionately larger in the cold group compared to the warm animals. Whole-animal metabolic rate was higher in the warm and cycling groups compared to the cold group - even when controlling for body mass - when assayed at 30°C, but not at 20°C. Mitochondrial oxidative phosphorylation capacity in permeabilized fibers of thigh muscle and heart did not differ among treatments. Membrane fatty acid composition of the brain was largely unaffected by temperature treatment, but adjustments were made in the phospholipid headgroup composition that are consistent with homeoviscous adaptation. Thigh muscle cell membranes had elevated polyunsaturated fatty acids in the cold group relative to the cycling group, but this was not the case for thigh muscle mitochondrial membranes. Liver mitochondria from cold alligators had elevated docosahexaenoic acid, which might be important for maintenance of reaction rates of membrane-bound enzymes. Copyright © 2016 Elsevier Ltd. All rights reserved.
A survey on difficulties and desires of breast-feeding women in Wuhan, China.
Ouyang, Yan-Qiong; Su, Min; Redding, Sharon R
2016-06-01
exclusive breast feeding in China is relatively low and no research has been conducted to explore the difficulties and desires of Chinese lactating mothers. Currently, Chinese women turn to massage therapists to increase breastmilk volume, implying that many breast-feeding women faced problems but had few support mechanisms.This study aimed to explore the difficulties and desires of Chinese breast-feeding women and to propose strategies for increasing the rate of exclusive breast feeding. three hundred and seventy-five primiparous women were recruited from two randomized cluster communities in Wuhan following ethical approval. Face-to-face semistructured interviews were conducted with 76 of the participants to collect data on their infants' feeding status, duration of exclusive breast feeding, reasons for stopping, difficulties encountered, and sources of support for lactation. the breast feeding initiation rate was 93.6%, but exclusive breast feeding was only 6.2% at six months. The most frequently cited reason for giving up exclusive breast feeding was perceived breastmilk insufficiency. Women cited a desire for professional and individualised instruction from following resources: (1) lactation consultants in hospital and communities; (2) Qualified cuirushi; (3) breast feeding website;(4) Relatives, friends and peers;(5) Telephone hotline. to improve the rate and duration of exclusive breast feeding in China, effective and available resources must be available. Timely,professional and face-to-face lactation counselling such as lactation consultant, qualified cuirushin is needed. Copyright © 2016 Elsevier Ltd. All rights reserved.
Adams, Jesse B.; Bollens, Stephen M.; Bishop, John G.
2015-01-01
Invasive planktonic crustaceans have become a prominent feature of aquatic communities worldwide, yet their effects on food webs are not well known. The Asian calanoid copepod, Pseudodiaptomus forbesi, introduced to the Columbia River Estuary approximately 15 years ago, now dominates the late-summer zooplankton community, but its use by native aquatic predators is unknown. We investigated whether three species of planktivorous fishes (chinook salmon, three-spined stickleback, and northern pikeminnow) and one species of mysid exhibited higher feeding rates on native copepods and cladocerans relative to P. forbesi by conducting `single-prey’ feeding experiments and, additionally, examined selectivity for prey types with `two-prey’ feeding experiments. In single-prey experiments individual predator species showed no difference in feeding rates on native cyclopoid copepods (Cyclopidae spp.) relative to invasive P. forbesi, though wild-collected predators exhibited higher feeding rates on cyclopoids when considered in aggregate. In two-prey experiments, chinook salmon and northern pikeminnow both strongly selected native cladocerans (Daphnia retrocurva) over P. forbesi, and moreover, northern pikeminnow selected native Cyclopidae spp. over P. forbesi. On the other hand, in two-prey experiments, chinook salmon, three-spined stickleback and mysids were non- selective with respect to feeding on native cyclopoid copepods versus P. forbesi. Our results indicate that all four native predators in the Columbia River Estuary can consume the invasive copepod, P. forbesi, but that some predators select for native zooplankton over P. forbesi, most likely due to one (or both) of two possible underlying casual mechanisms: 1) differential taxon-specific prey motility and escape responses (calanoids > cyclopoids > daphnids) or 2) the invasive status of the zooplankton prey resulting in naivety, and thus lower feeding rates, of native predators feeding on invasive prey. PMID:26618851
Comparison of TID Effects in Space-Like Variable Dose Rates and Constant Dose Rates
NASA Technical Reports Server (NTRS)
Harris, Richard D.; McClure, Steven S.; Rax, Bernard G.; Evans, Robin W.; Jun, Insoo
2008-01-01
The degradation of the LM193 dual voltage comparator has been studied at different TID dose rate profiles, including several different constant dose rates and a variable dose rate that simulates the behavior of a solar flare. A comparison of results following constant dose rate vs. variable dose rates is made to explore how well the constant dose rates used for typical part testing predict the performance during a simulated space-like mission. Testing at a constant dose rate equal to the lowest dose rate seen during the simulated flare provides an extremely conservative estimate of the overall amount of degradation. A constant dose rate equal to the average dose rate is also more conservative than the variable rate. It appears that, for this part, weighting the dose rates by the amount of total dose received at each rate (rather than the amount of time at each dose rate) results in an average rate that produces an amount of degradation that is a reasonable approximation to that received by the variable rate.
Every three-hour versus every six-hour oral feeding in preterm infants: a randomised clinical trial.
Gray, Megan M; Medoff-Cooper, Barbara; Enlow, Elizabeth M; Mukhopadhyay, Sagori; DeMauro, Sara B
2017-02-01
This trial compares two oral feeding schedules, every three-hour and every six-hour oral feeding attempts, to determine which schedule allows for more rapid attainment of full oral feeding in preterm infants. Infants born at ≤33-week gestation were randomly assigned to receive oral feeding every three hours or every six hours if feeding cues were present. The primary outcome was time to full oral feeding; secondary outcomes include respiratory and apnoea rates, growth and length of stay. A total of 55 infants were recruited. There was no difference between the groups in the primary or secondary outcomes. For preterm infants fed when oral feeding cues are present, an every six-hour schedule did not alter the time to full oral feeding and had no effect on rates of tachypnoea, apnoea or length of hospital stay compared to every three-hour feeding schedule. An every six-hour oral feeding schedule led to only small reductions in number of oral feeding attempts per day. ©2016 Foundation Acta Paediatrica. Published by John Wiley & Sons Ltd.
Daily rhythms of locomotor and demand-feeding activities in Schizothorax pelzami (Kessler, 1870).
Ebrahimi, Ehsan; Kamrani, Ehsan; Heydarnejad, Mohammad Saeed; Safari, Omid
2017-01-01
A study was carried out to investigate the daily rhythms of locomotor and feeding activity of Khajoo, Schizothorax pelzami, a candidate species for freshwater aquaculture. Using self-feeder juvenile Khajoo were exposed to a 12/12 LD cycle to determine the rhythms of locomotor and feeding activity. The effects of feeding on locomotor and feeding activity of fish were also examined. Finally, the endogenous rhythmicity under different lighting condition tested. Fish displayed a strictly diurnal feeding and locomotor activities with 98% and 84% of the total activity occurred in the photophase, respectively. In scheduled feeding, both the L-group (fed in light) and the D-group (fed in the dark) showed a diurnal locomotor activity pattern. However, the L-group had a peak of locomotor activity near the feeding time, but the D-group had a scarce locomotor activity in the scatophase with no significant change at the mealtime. Most of the individuals display free-running rhythms when exposed to different lighting condition including, constant darkness, ultradian 45:45 min LD cycle and reversed DL photo cycle. Taken together the results of this study showed that both locomotor and feeding activity have diurnal rhythms in Khajoo S. pelzami, even fish feeding had taken place at night. Additionally, the free-running locomotor activity of the fish in the absence of external light stimuli, suggests the existence of an endogenous timing mechanism in this fish species.
Jolly, Kate; Ingram, Jenny; Clarke, Joanne; Johnson, Debbie; Trickey, Heather; Thomson, Gill; Dombrowski, Stephan U; Sitch, Alice; Dykes, Fiona; Feltham, Max G; Darwent, Kirsty; MacArthur, Christine; Roberts, Tracy
2018-01-01
Introduction Breast feeding improves the health of mothers and infants; the UK has low rates, with marked socioeconomic inequalities. While trials of peer support services have been effective in some settings, UK trials have not improved breast feeding rates. Qualitative research suggests that many women are alienated by the focus on breast feeding. We propose a change from breast feeding-focused interactions to respecting a woman’s feeding choices, inclusion of behaviour change theory and an increased intensity of contacts in the 2 weeks after birth when many women cease to breast feed. This will take place alongside an assets-based approach that focuses on the positive capability of individuals, their social networks and communities. We propose a feasibility study for a multicentre randomised controlled trial of the Assets feeding help Before and After birth (ABA) infant feeding service versus usual care. Methods and analysis A two-arm, non-blinded randomised feasibility study will be conducted in two UK localities. Women expecting their first baby will be eligible, regardless of feeding intention. The ABA infant feeding intervention will apply a proactive, assets-based, woman-centred, non-judgemental approach, delivered antenatally and postnatally tailored through face-to-face contacts, telephone and SMS texts. Outcomes will test the feasibility of delivering the intervention with recommended intensity and duration to disadvantaged women; acceptability to women, feeding helpers and professionals; and feasibility of a future randomised controlled trial (RCT), detailing recruitment rates, willingness to be randomised, follow-up rates at 3 days, 8 weeks and 6 months, and level of outcome completion. Outcomes of the proposed full trial will also be collected. Mixed methods will include qualitative interviews with women/partners, feeding helpers and health service staff; feeding helper logs; and review of audio-recorded helper–women interactions to assess intervention fidelity. Ethics and dissemination Study results will inform the design of a larger multicentre RCT. The National Research Ethics Service Committee approved the study protocol. Trial registration number ISRCTN14760978; Pre-results. PMID:29362263
Jolly, Kate; Ingram, Jenny; Clarke, Joanne; Johnson, Debbie; Trickey, Heather; Thomson, Gill; Dombrowski, Stephan U; Sitch, Alice; Dykes, Fiona; Feltham, Max G; Darwent, Kirsty; MacArthur, Christine; Roberts, Tracy; Hoddinott, Pat
2018-01-23
Breast feeding improves the health of mothers and infants; the UK has low rates, with marked socioeconomic inequalities. While trials of peer support services have been effective in some settings, UK trials have not improved breast feeding rates. Qualitative research suggests that many women are alienated by the focus on breast feeding. We propose a change from breast feeding-focused interactions to respecting a woman's feeding choices, inclusion of behaviour change theory and an increased intensity of contacts in the 2 weeks after birth when many women cease to breast feed. This will take place alongside an assets-based approach that focuses on the positive capability of individuals, their social networks and communities.We propose a feasibility study for a multicentre randomised controlled trial of the Assets feeding help Before and After birth (ABA) infant feeding service versus usual care. A two-arm, non-blinded randomised feasibility study will be conducted in two UK localities. Women expecting their first baby will be eligible, regardless of feeding intention. The ABA infant feeding intervention will apply a proactive, assets-based, woman-centred, non-judgemental approach, delivered antenatally and postnatally tailored through face-to-face contacts, telephone and SMS texts. Outcomes will test the feasibility of delivering the intervention with recommended intensity and duration to disadvantaged women; acceptability to women, feeding helpers and professionals; and feasibility of a future randomised controlled trial (RCT), detailing recruitment rates, willingness to be randomised, follow-up rates at 3 days, 8 weeks and 6 months, and level of outcome completion. Outcomes of the proposed full trial will also be collected. Mixed methods will include qualitative interviews with women/partners, feeding helpers and health service staff; feeding helper logs; and review of audio-recorded helper-women interactions to assess intervention fidelity. Study results will inform the design of a larger multicentre RCT. The National Research Ethics Service Committee approved the study protocol. ISRCTN14760978; Pre-results. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.
Dibley, Michael J; Senarath, Upul; Agho, Kingsley E
2010-09-01
To compare infant and young child feeding practices in children aged 0-23 months across nine East and Southeast Asian countries. Secondary analyses of cross-sectional data from available Demographic and Health Surveys (DHS; Indonesia, Philippines, Timor-Leste, Cambodia and Vietnam), Multiple Indicator Country Surveys (Lao People's Democratic Republic (Lao PDR) and Myanmar) and national nutrition surveys (Democratic People's Republic of Korea (DPR Korea) and Mongolia) conducted between 2000 and 2005. Seven countries from Southeast Asia and two from East Asia. Children aged 0-23 months with samples ranging from 826 to 5610 for DHS, and from 477 to 5860 for non-DHS data. More than 93 % of infants were ever breast-fed, and over 75 % were currently breast-fed except in the Philippines. Timely initiation of breast-feeding varied from 32 % in Indonesia to 46 % in Timor-Leste. Exclusive breast-feeding (EBF) rate in infants under 6 months of age ranged from 11 % in Myanmar to 60 % in Cambodia. EBF rates were also low in Vietnam (15.5 %) and Lao PDR (23 %), and varied between 30 % and 40 % in Indonesia, Philippines and Timor-Leste. The proportion of infants under 6 months of age who were given breast milk with non-milk liquids was high except in Indonesia and Timor-Leste. Bottle-feeding rates were lower in DPR Korea (3 %), Lao PDR (6 %) and Myanmar (6 %) and higher in the Philippines (49 %) and Mongolia (31 %). Timely complementary-feeding rate varied widely across countries (6-99 %). All the countries studied should make greater efforts to improve timely initiation of breast-feeding and EBF for 6 months. Measures should be taken to reduce high bottle-feeding rate in the Philippines, Mongolia, Indonesia and Vietnam, and improve complementary-feeding rate in Lao PDR, Myanmar, DPR Korea and Philippines.
Self-mixing of fly larvae during feeding
NASA Astrophysics Data System (ADS)
Shishkov, Olga; Johnson, Christopher; Zhang, Bryan; Hu, David
2016-11-01
How do we sustainably feed a growing world population? One solution of increasing interest is the use of black solider fly larvae, pea-sized grubs envisioned to transform hundreds of tons of food waste into a sustainable protein source. Although startups across the world are raising these larvae, a physical understanding of how they should be raised and fed remains missing. In this study, we present experiments measuring their feeding rate as a function of number of larvae. We show that larger groups of larvae have greater mixing which entrains hungry larvae around the food, increasing feeding rate. Feeding of larvae thus differs from feeding of cattle or other livestock which exhibit less self-mixing.
Self mixing of fly larvae during feeding
NASA Astrophysics Data System (ADS)
Shishkov, Olga; Johnson, Christopher; Hu, David
How do we sustainably feed a growing world population? One solution of increasing interest is the use of black solider fly larvae, pea-sized grubs envisioned to transform hundreds of tons of food waste into a sustainable protein source. Although startups across the world are raising these larvae, a physical understanding of how they should be raised and fed remains missing. In this study, we present experiments measuring their feeding rate as a function of number of larvae. We show that larger groups of larvae have greater mixing which entrains hungry larvae around the food, increasing feeding rate. Feeding of larvae thus differs from feeding of cattle or other livestock which exhibit less self-mixing.
Vaughn, Lisa M; Ireton, Candace; Geraghty, Sheela R; Diers, Tiffiny; Niño, Vanessa; Falciglia, Grace A; Valenzuela, Jessica; Mosbaugh, Christine
2010-01-01
While breast-feeding initiation and duration among US Latina women appear to decrease with acculturation, health care providers in the Greater Cincinnati area have noted lower rates of breast-feeding among even first-generation Latina immigrants. This study's purpose was to identify determinants of breast-feeding for Latina mothers in Cincinnati through qualitative interviews and Spanish Breastfeeding Self-Efficacy Scale ratings. Our findings suggest that, along with similar levels of breast-feeding self-confidence, foreign-born Latina women in the Greater Cincinnati area share similar breast-feeding determinants with the general population. However, characteristics of these determinants and their impact vary because of unique pressures experienced by this community.
Kick, Benjamin; Behler, Karl Lorenz; Severin, Timm Steffen; Weuster-Botz, Dirk
2017-09-20
Steady state studies in a chemostat enable the control of microbial growth rate at defined reaction conditions. The effects of bacteriophage M13 infection on maximum growth rate of Escherichia coli JM109 were studied in parallel operated chemostats on a milliliter-scale to analyze the steady state kinetics of phage production. The bacteriophage infection led to a decrease in maximum specific growth rate of 15% from 0.74h -1 to 0.63h -1 . Under steady state conditions, a constant cell specific ssDNA formation rate of 0.15±0.004 mg ssDNA g CDW -1 h -1 was observed, which was independent of the growth rate. Using the estimated kinetic parameters for E. coli infected with bacteriophage M13, the ssDNA concentration in the steady state could be predicted as function of the dilution rate and the glucose concentration in the substrate. Scalability of milliliter-scale data was approved by steady state studies on a liter-scale at a selected dilution rate. An ssDNA space-time yield of 5.7mgL -1 h -1 was achieved with increased glucose concentration in the feed at a dilution rate of 0.3h -1 , which is comparable to established fed-batch fermentation with bacteriophage M13 for ssDNA production. Copyright © 2017 Elsevier B.V. All rights reserved.
NASA Astrophysics Data System (ADS)
Suh, Y.; Shin, K.
2011-12-01
Manila clams sampled in Seonjae Island, Korea with shell lengths (SL) below 19.76 mm in average showed a significantly depleted carbon and nitrogen isotope values (P<0.05) by 0.80~1.41 %. This size related variation can be caused by either altered carbon and nutrient source or by affected isotopic incorporation rates and discrimination factors. In order to examine size-related diet shift in manila clams, R. philippinarum with different sizes that were constantly fed on known mixed microalgae for several months were sampled from Incheon Fisheries Hacheries Research Institute (IFRI). These manila clams have shown a high intra-species variation in growth rate with a maximum difference of more or less 2.30 cm. The smallest size groups (3.68±0.17 mm and 6.88±0.21 mm) obtained their nutrition from both P. tricornutum and aggregated organic matter that consists of dead or decomposed microalgae or other detritus. Bigger size groups (10.92±0.34 mm and 14.81±0.25 mm) obtained most of their energy from P.tricorutum and also from other phytoplankton unlike the biggest size group (21.15±1.02 mm) that feeds mainly on fresh microalgae of all diets fed. This variation in diet reveals that smaller clams mostly inhale dead or decomposed microalgae that sinks on the bottom while the bigger clams uptake more fresh ones that are still alive. This variation in feeding behavior could have been caused by morphological constraints such as limited siphon length. The results suggest that manila clams greater than and below 19.76 mm in average have different feeding behavior and P. tricornutum and I. galbana were the two most preferred diets for manila clams cultured in IFHRI. The result of fatty acid composition of manila clams in relation to size or growth rate suggests that fast growing clams would have rapid metabolism of fatty acids not required by the animals and an accumulation of the essential fatty acids (PUFA). In addition, their higher energy requirement and more active state of development would further diminish lipid reserve of the species.
Primary prevention of HTLV-I in Japan.
Hino, S; Katamine, S; Miyata, H; Tsuji, Y; Yamabe, T; Miyamoto, T
1996-01-01
The ATL prevention program (AAP) in the Nagasaki Prefecture since 1987 consists of screening of pregnant women and asking the seropositives to refrain from breast-feeding. We screened approximately 90% of gravidas in the Prefecture and > 90% of the seropositive women agreed not to breast-feed. The maternal transmission rate dropped from approximately 20% to approximately 3%. PCR of cord bloods showed that 2.5% were PCR-positive. However, among formula-fed children, none of the cord-positives seroconverted, and none of the seropositives tested had been cord-positive. Breast-feeding for less than six months decreased the transmission rate significantly, but may have a higher transmission rate than the formula feeding.
NASA Astrophysics Data System (ADS)
Burger, Joanna; Gochfeld, Michael
1991-02-01
Laughing gulls ( Larus atricilla) forage on horseshoe crab ( Limulus polyphemus) eggs during May in Delaware Bay each year. They feed in dense flocks, and foraging rates vary with vigilance, bird density, number of steps and location in the flock, whereas time devoted to vigilance is explained by number of steps, density, location and feeding rates. The time devoted to vigilance decreases with increasing density, increasing foraging rates and decreasing aggression. Birds foraging on the edge of flocks take fewer pecks and more steps, and devote more time to vigilance than those in the intermediate or central parts of a flock.
Petrowsky, Matt; Glatzhofer, Daniel T; Frech, Roger
2013-11-21
The dependence of the reaction rate on solvent dielectric constant is examined for the reaction of trihexylamine with 1-bromohexane in a series of 2-ketones over the temperature range 25-80 °C. The rate constant data are analyzed using the compensated Arrhenius formalism (CAF), where the rate constant assumes an Arrhenius-like equation that also contains a dielectric constant dependence in the exponential prefactor. The CAF activation energies are substantially higher than those obtained using the simple Arrhenius equation. A master curve of the data is observed by plotting the prefactors against the solvent dielectric constant. The master curve shows that the reaction rate has a weak dependence on dielectric constant for values approximately less than 10 and increases more rapidly for dielectric constant values greater than 10.
NASA Astrophysics Data System (ADS)
Vijaykumar, Adithya; ten Wolde, Pieter Rein; Bolhuis, Peter G.
2018-03-01
To predict the response of a biochemical system, knowledge of the intrinsic and effective rate constants of proteins is crucial. The experimentally accessible effective rate constant for association can be decomposed in a diffusion-limited rate at which proteins come into contact and an intrinsic association rate at which the proteins in contact truly bind. Reversely, when dissociating, bound proteins first separate into a contact pair with an intrinsic dissociation rate, before moving away by diffusion. While microscopic expressions exist that enable the calculation of the intrinsic and effective rate constants by conducting a single rare event simulation of the protein dissociation reaction, these expressions are only valid when the substrate has just one binding site. If the substrate has multiple binding sites, a bound enzyme can, besides dissociating into the bulk, also hop to another binding site. Calculating transition rate constants between multiple states with forward flux sampling requires a generalized rate expression. We present this expression here and use it to derive explicit expressions for all intrinsic and effective rate constants involving binding to multiple states, including rebinding. We illustrate our approach by computing the intrinsic and effective association, dissociation, and hopping rate constants for a system in which a patchy particle model enzyme binds to a substrate with two binding sites. We find that these rate constants increase as a function of the rotational diffusion constant of the particles. The hopping rate constant decreases as a function of the distance between the binding sites. Finally, we find that blocking one of the binding sites enhances both association and dissociation rate constants. Our approach and results are important for understanding and modeling association reactions in enzyme-substrate systems and other patchy particle systems and open the way for large multiscale simulations of such systems.
Bedform migration in steep channels: from local avalanches to large scale changes
NASA Astrophysics Data System (ADS)
Mettra, F.; Heyman, J.; Ancey, C.
2013-12-01
Many studies have emphasized the strength of bedload transport fluctuations in steep streams, especially at low and intermediate transport conditions (relative to the threshold of incipient motion). The origins of these fluctuations, which appear on a wide range of time scales, are still not well understood. In this study, we present the data obtained from a 2D idealized laboratory experiment with the objective of simultaneously recording the channel bed evolution and bedload transport rate at a high temporal resolution. A 3-m long by 8-cm wide transparent flume filled with well-sorted natural gravel (d50=6.5 mm) was used. An efficient technique using accelerometers has been developed to record the arrival time of every particle at the outlet of the flume for long experimental durations (up to a few days). In addition, bed elevation was monitored using cameras filming from the side of the channel, allowing the observation of global aggradation/degradation as well as bedform migration. The experimental parameters were the water discharge, the flume inclination (from 2° to 5°) and the constant feeding rate of sediments. Large-scale bed evolution showed successive aggradation and rapid degradation periods. Indeed, the measured global channel slope, i.e. mean slope over the flume length, fluctuated continuously within a range sometimes wider than 1° (experimental parameters were constant over the entire run). The analysis of these fluctuations provides evidence that steep channels behave like metastable systems, similarly to grain piles. The metastable effects increased for steeper channels and lower transport conditions. In this measurement campaign, we mainly observed upstream-migrating antidunes. For each run, various antidune heights and celerities were measured. On average, the mean antidune migration rate increased with decreasing channel slope and increasing sediment feeding rate. Relatively rare tall and fast-moving antidunes appeared more frequently at high flume angles and produced intense solid discharge pulses. Moreover, small avalanches occurred on the steep lee sides of antidunes. From these results, we infer a mechanism of steep channel evolution. The time- and space-averaged profile of the bed in the streamwise direction depends on the experimental parameters. Variations in the profile result mainly from bedform migration. The instantaneous global state of the bed (which can be characterized by the global channel slope) controls the growth of bedforms, which can be seen as local instabilities. When the global channel slope approaches its critical value, local instabilities of higher amplitude can develop and create intense bedload transport pulses, leading to a less steep, but more stable bed profile.
Gallo, G F; Berg, J L
1995-01-01
The effectiveness of a feed-additive antimicrobial combination for improving feedlot performance and health was tested using 4325 high-risk feeder calves randomly allocated to a control group or an experimental group. The experimental group received the conventional ration plus a feed additive containing 700 mg per head/day of chlortetracycline and sulfamethazine from arrival at the feedlot to day 56 of the feeding period. The inclusion of the feed additive to the ration significantly improved average daily gain for days 0-28 (P = 0.0163) and 0-56 (P = 0.0001), and the feed conversion for days 0-28 (P = 0.0061) and 0-56 (P = 0.0004). Additionally, the use of the feed additive significantly reduced the rate of bovine respiratory disease morbidity for days 0-28 (P = 0.0014) and 0-56 (P = 0.0001), the rate of relapses and mortality for days 0-56 (P = 0.0151 and P = 0.0209, respectively), and the rate of animals diagnosed with chronic respiratory disease for days 0-28 and 0-56 (P = 0.0009 and P = 0.0002, respectively). Performance and health improvements produced by the use of the feed additive were cost-effective. PMID:7600512
Rate constants measured for hydrated electron reactions with peptides and proteins
NASA Technical Reports Server (NTRS)
Braams, R.
1968-01-01
Effects of ionizing radiation on the amino acids of proteins and the reactivity of the protonated amino group depends upon the pK subscript a of the group. Estimates of the rate constants for reactions involving the amino acid side chains are presented. These rate constants gave an approximate rate constant for three different protein molecules.
Identification of a novel hemolymph peptide that modulates silkworm feeding motivation.
Nagata, Shinji; Morooka, Nobukatsu; Asaoka, Kiyoshi; Nagasawa, Hiromichi
2011-03-04
Phytophagous insects do not constantly chew their diets; most of their time is spent in a non-feeding quiescent state even though they live on or around their diets. Following starvation, phytophagous insect larvae exhibit enhanced foraging behaviors such as nibbling and walking similar to the sequential behavior that occurs prior to each meal. Although extensive physiological studies have revealed regularly occurring feeding behaviors in phytophagous insects, little has been elucidated regarding the mechanism at the molecular level. Here, we report identification and characterization of a novel 62-amino acid peptide, designated as hemolymph major anionic peptide (HemaP), from the hemolymph of Bombyx mori larvae that induces foraging behaviors. The endogenous HemaP levels are significantly increased by diet deprivation, whereas refeeding after starvation returns them to basal levels. In larvae fed ad libitum, hemolymph HemaP levels fluctuate according to the feeding cycle, indicating that locomotor-associated feeding behaviors of B. mori larvae are initiated when HemaP levels exceed an unidentified threshold. Furthermore, administration of exogenous HemaP mimics the starvation-experienced state by affecting dopamine levels in the suboesophageal ganglion, which coordinates neck and mandible movements. These data strongly suggest that fluctuation of hemolymph HemaP levels modulates the regularly occurring feeding-motivated behavior in B. mori by triggering feeding initiation.
Identification of a Novel Hemolymph Peptide That Modulates Silkworm Feeding Motivation*
Nagata, Shinji; Morooka, Nobukatsu; Asaoka, Kiyoshi; Nagasawa, Hiromichi
2011-01-01
Phytophagous insects do not constantly chew their diets; most of their time is spent in a non-feeding quiescent state even though they live on or around their diets. Following starvation, phytophagous insect larvae exhibit enhanced foraging behaviors such as nibbling and walking similar to the sequential behavior that occurs prior to each meal. Although extensive physiological studies have revealed regularly occurring feeding behaviors in phytophagous insects, little has been elucidated regarding the mechanism at the molecular level. Here, we report identification and characterization of a novel 62-amino acid peptide, designated as hemolymph major anionic peptide (HemaP), from the hemolymph of Bombyx mori larvae that induces foraging behaviors. The endogenous HemaP levels are significantly increased by diet deprivation, whereas refeeding after starvation returns them to basal levels. In larvae fed ad libitum, hemolymph HemaP levels fluctuate according to the feeding cycle, indicating that locomotor-associated feeding behaviors of B. mori larvae are initiated when HemaP levels exceed an unidentified threshold. Furthermore, administration of exogenous HemaP mimics the starvation-experienced state by affecting dopamine levels in the suboesophageal ganglion, which coordinates neck and mandible movements. These data strongly suggest that fluctuation of hemolymph HemaP levels modulates the regularly occurring feeding-motivated behavior in B. mori by triggering feeding initiation. PMID:21177851
7 CFR 760.1203 - Payment calculation.
Code of Federal Regulations, 2010 CFR
2010-01-01
... beginning on January 2, 2005 and ending February 27, 2007. The producer must pick the year of the benefits..., (ii) Catfish feed payment rate for 2005, 2006, or 2007, as applicable, as set by FSA. (c) The catfish feed rate represents 61 percent of the normal cost of a ton of feed for a year divided by six to...
Girgin, Burcu Aykanat; Gözen, Duygu; Karatekin, Güner
2018-04-01
The aim of this randomized controlled study was to determine the effect of semielevated side-lying (ESL) and semielevated supine (ESU) positions, which are used to bottle-feed preterm infants, on their physiological characteristics and feeding performance. The sample consisted of preterm infants who were born in the 31st gestational week and below, and met the inclusion criteria. A randomization was provided in the sample group with a total of 80 infants including 38 infants in the ESL (experimental) group and 42 infants in the ESU (control) group. Both groups were compared in terms of their SpO2 values, heart rates, and feeding performances before, during, and after the feeding. The data were obtained by using a form for infant descriptive characteristics, feeding follow-up form, a Masimo Radical-7 pulse oximeter device, and a video camera. It was determined that the infants in the ESL group had statistically significantly higher SpO2 values (ESL: 96.77 ± 2.51; ESU: 93.48 ± 5.63) and lower heart rates (ESL: 155.87 ± 11.18; ESU: 164.35 ± 6.00) during the feeding compared to the infants in the ESU group (p < .05). Besides, oxygen saturation levels of the infants in the ESU group decreased more (p < .01) and their heart rates increased more (p < .05) during the feeding than those obtained before the feeding compared to the infants in the ESL group. The ESL position has a more positive effect on oxygen saturation and heart rate of infants and it is more effective in providing a physiological stabilization during the feeding, compared to the ESU position. According to these results, the ESL position can be recommended for preterm feeding. © 2018 Wiley Periodicals, Inc.
Chronic ethanol feeding modulates the synthesis of digestive enzymes
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ponnappa, B.C.; Hoek, J.B.; Rubin, E.
1987-05-01
The effects of chronic ethanol feeding on pancreatic protein synthesis were investigated. Protein synthesis was assessed by studying the rate of incorporation of /sup 3/H-leucine into TCA-precipitable proteins in isolated pancreatic acini from rats. Chronic ethanol ingestion increased the rate of pancreatic protein synthesis by 2-4 fold. The onset of the increase in protein synthesis was detectable two days after ethanol feeding, reached a maximum after 7 days and remained unchanged after 4 months on the ethanol-containing diet. The rate of synthesis of individual digestive enzymes was studied by SDS-PAGE on extracts obtained from purified zymogen granules. Ethanol feeding inducedmore » an increase in the rate of synthesis of most of the digestive enzymes; chymotrypsinogen, trypsinogen and an unidentified protein were increased to a greater extent than other digestive enzymes. By contrast, the synthesis of amylase was selectively decreased after ethanol feeding. These results suggest that chronic ethanol ingestion has specific effects on the rate of synthesis of individual digestive enzymes in the exocrine pancreas.« less
Quantitative disease resistance: dissection and adoption in maize
USDA-ARS?s Scientific Manuscript database
Maize is the world’s most widely cultivated crop, providing food, feed, and biofuel. Maize production is constantly threatened by the presence of devastating pathogens worldwide. Characterization of the genetic components underlying disease resistance is a major research area in maize which is highl...
Control logic to track the outputs of a command generator or randomly forced target
NASA Technical Reports Server (NTRS)
Trankle, T. L.; Bryson, A. E., Jr.
1977-01-01
A procedure is presented for synthesizing time-invariant control logic to cause the outputs of a linear plant to track the outputs of an unforced (or randomly forced) linear dynamic system. The control logic uses feed-forward of the reference system state variables and feedback of the plant state variables. The feed-forward gains are obtained from the solution of a linear algebraic matrix equation of the Liapunov type. The feedback gains are the usual regulator gains, determined to stabilize (or augment the stability of) the plant, possibly including integral control. The method is applied here to the design of control logic for a second-order servomechanism to follow a linearly increasing (ramp) signal, an unstable third-order system with two controls to track two separate ramp signals, and a sixth-order system with two controls to track a constant signal and an exponentially decreasing signal (aircraft landing-flare or glide-slope-capture with constant velocity).
21 CFR 558.455 - Oxytetracycline and neomycin.
Code of Federal Regulations, 2013 CFR
2013-04-01
... use—(1) Chickens. It is used in feed as follows: Oxytetracycline and neomycin sulfate amount in grams per ton of feed Indications for use Limitations Sponsors (i) 10 to 50 Chickens: For increased rate of weight gain and improved feed efficiency. Feed continuously; do not feed to chickens producing eggs for...
21 CFR 558.455 - Oxytetracycline and neomycin.
Code of Federal Regulations, 2014 CFR
2014-04-01
... use—(1) Chickens. It is used in feed as follows: Oxytetracycline and neomycin sulfate amount in grams per ton of feed Indications for use Limitations Sponsors (i) 10 to 50 Chickens: For increased rate of weight gain and improved feed efficiency. Feed continuously; do not feed to chickens producing eggs for...
21 CFR 558.455 - Oxytetracycline and neomycin.
Code of Federal Regulations, 2012 CFR
2012-04-01
... use—(1) Chickens. It is used in feed as follows: Oxytetracycline and neomycin sulfate amount in grams per ton of feed Indications for use Limitations Sponsors (i) 10 to 50 Chickens: For increased rate of weight gain and improved feed efficiency. Feed continuously; do not feed to chickens producing eggs for...
Chamruspollert, M; Pesti, G M; Bakalli, R I
2002-07-01
The methionine requirement of 250-to-300-g broiler chicks was estimated from the oxidation of L-[1-14C] phenylalanine of chicks given meals containing graded levels of DL-methionine. L-[1-14C] phenylalanine was used as an indicator amino acid for amino acid oxidation and, indirectly, protein synthesis. Four experiments were conducted using an incomplete block design with three replications each. Chicks were crop intubated with semifluid diets at a ratio of 1 g of diet per 45 g of bird weight. Two feedings 2 h apart were used to reduce variability, and the sample collection period was 3 h after the second feeding. Regression analysis of 14CO2 release from L-[1-14C] phenylalanine was used to estimate the methionine requirement. The model was as follows: response = max + rc x (req - x) x I, where max = plateau, rc = rate constant, req = requirement, and I = 1 when x < req, otherwise I = 0. The methionine requirements of Ross x Ross chicks were 0.57 +/- 0.03% and 0.52 +/- 0.08% for male and female chicks, respectively in Experiment 1 and 0.55 +/- 0.05% and 0.52 +/- 0.04%, respectively, in Experiment 2. In the third experiment (Arbor Acre High-Yield), phenylalanine oxidation stabilized at a low rate when dietary methionine levels reached 0.54 +/- 0.03% and 0.53 +/- 0.04% for males and females, respectively. In a growth trial covering a longer period (Experiment 4), the methionine requirements of male and female Ross x Ross chicks, based on feed conversion, were 0.52 +/- 0.05% and 0.45 +/- 0.02%, respectively, and based on body gain were 0.54 +/0.09% and 0.48 +/- 0.04%, respectively. The results suggested that the methionine requirement of male chicks tended to be higher than that of females in both strains. However, differences were small and not significant.
Analysis on Characteristics of a C-Shaped Constant-Force Spring with a Guide
NASA Astrophysics Data System (ADS)
Ohtsuki, Atsumi; Ohshima, Shigemichi; Itoh, Daisuke
A C-shaped constant-force spring is made of pre-stressed material in various sizes that offer the advantage of a constant tensile load, suitable for a variety of applications (for example, extension spring, motor-brush holder, power feed, retracting and restoring mechanism). Essentially, this spring consists of a coil of flat spring material and when unstressed it takes the form of a tightly wound spiral. This spiral is placed on a drum. When a tensile load is applied, the spiral uncoils. The load is practically independent of the amount of deformation. In this report, the extension mechanism of constant-force spring and the state of deformation are analyzed by using a large deformation theory. Moreover, experiments are carried out to confirm the applicability of the proposed theory. The experimental results agree well with the theoretical estimations.
Emerging feed markets for ruminant production in urban and peri-urban areas of Northern Ghana.
Konlan, S P; Ayantunde, A A; Addah, W; Dei, H K; Karbo, N
2018-01-01
Feed shortage in urban and peri-urban areas has triggered the emergence of feed markets in Northern Ghana. These markets were surveyed at three locations (Tamale, Bolgatanga, and Wa markets) to determine types and prices of feedstuffs sold across seasons; early dry (November-January), late dry (February-April), early wet (May-July), and main wet (August-October). Semi-structured questionnaire was used for data collection. Three samples of each feed type in the markets were bought from three different sellers per market in each season. The samples were oven dried to constant weight and price/kg DM of each feed determined. The total respondents were 169. Out of this number, 41% were feed sellers, 46% buyers, and 13% retailers. The feedstuffs found were crop residues (groundnut haulm and cowpea haulm), agro-industrial by-products (bran of maize, rice, and sorghum), fresh grasses (Rotteboellia cochinchinensis), and local browses (Ficus sp. and Pterocarpus erinaceous). Prices of feeds differed (P < 0.05) among markets and were higher in Bolgatanga than Tamale and Wa markets. Prices of cereal bran were not different (P > 0.05) in all seasons but that of crop residues were higher (P < 05) in early to late dry season than the wet season. Majority (90%) of respondents opined that the feed market will expand due to increasing number of livestock population in the peri-urban areas.
McLennan, John D
2016-10-01
The relationship between caesarean sections (C-sections) and infant feeding varies between different samples and indicators of feeding. The current study aimed to determine the relationship between C-sections and five indicators of infant milk feeding (breast-feeding within 1 h after delivery, at the time of the survey (current) and ever; milk-based prelacteal feeds; and current non-breast milk use) over time in a country with a rapidly rising C-section rate. Secondary data analysis on cross-sectional data from Demographic and Health Surveys from six different time points between 1986 and 2013. Dominican Republic. Infants under 6 months of age. Over 90 % of infants were ever breast-fed in each survey sample. However, non-breast milk use has expanded over time with a concomitant drop in predominant breast-feeding. C-section prevalence has increased over time reaching 63 % of sampled infants in the most recent survey. C-sections remained significantly related to three infant feeding practices - the child not put to the breast within 1 h after delivery, milk-based prelacteal feeds and current non-breast milk use - in multivariate models that included sociodemographic control variables. However, current non-breast milk use was no longer related to C-sections when milk-based prelacteal feeds were factored into the model. Reducing or avoiding milk-based prelacteal feeds, particularly among those having C-sections, may improve subsequent breast-feeding patterns. Simultaneously, efforts are needed to understand and help reduce the exceptionally high C-section rate in the Dominican Republic.
Heart Rate Variability as a Feeding Intervention Outcome Measure in the Preterm Infant.
Pados, Britt F; Thoyre, Suzanne M; Knafl, George J; Nix, William Brant
2017-10-01
Feeding interventions for preterm infants aim to reduce the physiologic stress of feeding to promote growth. Heart rate variability (HRV) is a potential noninvasive measure of physiologic stress that may be useful for evaluating efficacy of feeding interventions. To evaluate whether HRV is a sensitive measure of physiologic stress compared with standard physiologic outcomes in the context of a feeding intervention study. This was a secondary analysis of a within-subjects, cross-over design study comparing usual care feeding with a gentle, coregulated (CoReg) feeding approach in 14 infants born less than 35 weeks' postmenstrual age. HRV indices were calculated from electrocardiogram data and compared with standard physiologic outcomes, including oxygen saturation (Spo2), respiratory rate (RR), apnea, heart rate (HR), and bradycardia. Data were analyzed using linear mixed modeling. Infants fed using the CoReg approach had fewer apneic events and higher RR, suggesting they were able to breathe more during feeding. No statistically significant differences were found in SpO2, HR, bradycardia, or high frequency power (the most commonly reported measure of HRV). Infants fed using the usual care approach had significantly higher SD12, a measure of HRV indicating randomness in the HR, which is a potential indicator of elevated stress. SD12 was more sensitive to stress than SpO2, HR, and bradycardia. The utility of HRV as a measure of feeding outcomes in clinical practice needs further exploration. Further exploration of HRV as an intervention outcome measure is needed, particularly evaluating nonlinear indices, such as SD12.
Friedlaender, A S; Goldbogen, J A; Nowacek, D P; Read, A J; Johnston, D; Gales, N
2014-08-15
Body size and feeding mode are two fundamental characteristics that determine foraging performance and ecological niche. As the smallest obligate lunge filter feeders, minke whales represent an ideal system for studying the physical and energetic limits of filter feeding in endotherms. We used multi-sensor suction cup tags to quantify the feeding performance of Antarctic minke whales. Foraging dives around and beneath sea ice contained up to 24 lunges per dive, the highest feeding rates for any lunge-feeding whale. Their small size allows minke whales access to krill in sea-ice environments not easily accessible to larger baleen whales. Furthermore, their ability to filter feed provides an advantage over other smaller sympatric krill predators such as penguins and seals that feed on individual prey. The unique combination of body size, feeding mechanism and sea-ice habitat of Antarctic minke whales defines a previously undocumented energetic niche that is unique among aquatic vertebrates. © 2014. Published by The Company of Biologists Ltd.
NASA Astrophysics Data System (ADS)
Fonds, M.; Cronie, R.; Vethaak, A. D.; Van Der Puyl, P.
Daily rates of oxygen consumption, food consumption and growth of plaice ( Pleuronectes platessa) and flounder ( Platichthys flesus) have been measured in the laboratory at various constant temperatures. Oxygen consumption was related to body weight of the fish as a power function, with a weight exponent of between 0.71 and 0.85. No significant effects of temperature or feeding on this exponent were found. Flounder showed a significantly higher metabolic rate and a higher temperature coefficient for metabolism than plaice. Maximum daily rates of food consumption and the weight increment of fish fed with excess rations of fresh mussel meat could also be related to fish weights by means of power functions. For plaice these exponents decreased from about 0.9 at low temperatures (2-6 C°) to about 0.7 at high temperatures (18-22°C). Such a temperature effect on the weight exponent indicates that small juvenile fish eat more and grow faster at higher temperatures than do large older fish, and that large fish do better at low temperatures. After scaling of daily food consumption and growth in proportion to metabolic weights of the fish (W 0.78), feeding and growth at different fish sizes and temperatures can be compared and temperature-growth rate models can be used for investigations of feeding in natural populations. Compared to plaice, young flounder ate more and grew faster at higher temperatures (> 14°C). This may partly explain the preference of flounder for the shallower parts of coastal areas and estuaries, where summer temperatures and food densities are higher. Energy budgets of young plaice and flounder fed with excess rations of mussel meat indicate that at least 29% of the food energy is used for metabolism while about 37% of the food energy is converted into growth. The net conversion efficiency was estimated at 0.45 for food and growth in units of ash-free dry weight, and at 0.53 for food and growth in energy units. Analysis of the energy budget showed that the assimilated physiologically useful food energy is divided almost equally over metabolism (42-47%) and growth (53-55%). It is suggested that flatfish spend relatively less energy in swimming and therefore convert more food energy into growth than (pelagic) roundfish.
Growth trajectory influences temperature preference in fish through an effect on metabolic rate
Killen, Shaun S
2014-01-01
Most animals experience temperature variations as they move through the environment. For ectotherms, in particular, temperature has a strong influence on habitat choice. While well studied at the species level, less is known about factors affecting the preferred temperature of individuals; especially lacking is information on how physiological traits are linked to thermal preference and whether such relationships are affected by factors such feeding history and growth trajectory. This study examined these issues in the common minnow Phoxinus phoxinus, to determine the extent to which feeding history, standard metabolic rate (SMR) and aerobic scope (AS), interact to affect temperature preference. Individuals were either: 1) food deprived (FD) for 21 days, then fed ad libitum for the next 74 days; or 2) fed ad libitum throughout the entire period. All animals were then allowed to select preferred temperatures using a shuttle-box, and then measured for SMR and AS at 10 °C, estimated by rates of oxygen uptake. Activity within the shuttle-box under a constant temperature regime was also measured. In both FD and control fish, SMR was negatively correlated with preferred temperature. The SMR of the FD fish was increased compared with the controls, probably due to the effects of compensatory growth, and so these growth-compensated fish preferred temperatures that were on average 2·85 °C cooler than controls fed a maintenance ration throughout the study. Fish experiencing compensatory growth also displayed a large reduction in activity. In growth-compensated fish and controls, activity measured at 10 °C was positively correlated with preferred temperature. Individual fish prefer temperatures that vary predictably with SMR and activity level, which are both plastic in response to feeding history and growth trajectories. Cooler temperatures probably allow individuals to reduce maintenance costs and divert more energy towards growth. A reduction in SMR at cooler temperatures, coupled with a decrease in spontaneous activity, could also allow individuals to increase surplus AS for coping with environmental stressors. In warming climates, however, aquatic ectotherms could experience frequent fluctuations in food supply with long-lasting effects on metabolic rate due to compensatory growth, while simultaneously having limited access to preferred cooler habitats. PMID:24806155
Food consumption and growth rates of juvenile black carp fed natural and prepared feeds
Hodgins, Nathaniel C.; Schramm, Harold L.; Gerard, Patrick D.
2014-01-01
The introduced mollusciphagic black carp Mylopharyngodon piceus poses a significant threat to native mollusks in temperate waters throughout the northern hemisphere, but consumption rates necessary to estimate the magnitude of impact on mollusks have not been established. We measured food consumption and growth rates for small (77–245 g) and large (466–1,071 g) triploid black carp held individually under laboratory conditions at 20, 25, and 30°C. Daily consumption rates (g food · g wet weight fish−1·d−1·100) of black carp that received prepared feed increased with temperature (small black carp 1.39–1.71; large black carp 1.28–2.10), but temperature-related increases in specific growth rate (100[ln(final weight) - ln(initial weight)]/number of days) only occurred for the large black carp (small black carp −0.02 to 0.19; large black carp 0.16–0.65). Neither daily consumption rates (5.90–6.28) nor specific growth rates (0.05–0.24) differed among temperatures for small black carp fed live snails. The results of these laboratory feeding trials indicate food consumption rates can vary from 289.9 to 349.5 J·g−1·d−1 for 150 g black carp receiving prepared feed, from 268.8 to 441.0 J·g−1·d−1for 800 g black carp receiving prepared feed, and from 84.8 to 90.2 J·g−1·d−1 for 150 g black carp that feed on snails. Applying estimated daily consumption rates to estimated biomass of native mollusks indicates that a relatively low biomass of bla
A Novel Method for Rearing Zebrafish by Using Freshwater Rotifers (Brachionus calyciflorus)
Aoyama, Yuta; Moriya, Natsumi; Tanaka, Shingo; Taniguchi, Tomoko; Hosokawa, Hiroshi
2015-01-01
Abstract The zebrafish (Danio rerio) has become a powerful model organism for studying developmental processes and genetic diseases. However, there remain several problems in previous rearing methods. In this study, we demonstrate a novel method for rearing zebrafish larvae by using a new first food, freshwater rotifers (Brachionus calyciflorus). Feeding experiments indicated that freshwater rotifers are suitable as the first food for newly hatched larval fish. In addition, we revisited and improved a feeding schedule from 5 to 40 days postfertilization. Our feeding method using freshwater rotifers accelerated larval growth. At 49 dpf, one pair out of 10 pairs successfully produced six fertilized eggs. At 56, 63, and 71 dpf, 6 out of the 10 pairs constantly produced normal embryos. Our method will improve the husbandry of the zebrafish. PMID:25938499
Contaminated and uncontaminated feeding influence perceived intimacy in mixed-sex dyads.
Alley, Thomas R
2012-06-01
It was expected that viewers watching adult mixed-sex pairs dining together will give higher ratings of the perceived intimacy and involvement of the pair if feeding is displayed while eating, especially if the feeding involves contaminated (i.e., with potential germ transfer) foods. Our hypotheses were tested using a design in which participants viewed five videotapes in varying order. Each video showed different mixed-sex pairs of actors sharing meal and included a distinct form of food sharing or none. These were shown to 50 small groups of young adults in quasi-random sequences to control for order effects. Immediately after each video, viewers were asked about the attractiveness, attraction and intimacy in the dyad they had just observed. As predicted, videos featuring contaminated feeding consistently produced higher ratings on involvement and attraction than those showing uncontaminated feeding which, in turn, mostly produced higher ratings on involvement and attraction than those showing no feeding behaviors. Copyright © 2012 Elsevier Ltd. All rights reserved.
Method for controlling gas metal arc welding
Smartt, Herschel B.; Einerson, Carolyn J.; Watkins, Arthur D.
1989-01-01
The heat input and mass input in a Gas Metal Arc welding process are controlled by a method that comprises calculating appropriate values for weld speed, filler wire feed rate and an expected value for the welding current by algorithmic function means, applying such values for weld speed and filler wire feed rate to the welding process, measuring the welding current, comparing the measured current to the calculated current, using said comparison to calculate corrections for the weld speed and filler wire feed rate, and applying corrections.
Assessing estuarine quality: A cost-effective in situ assay with amphipods.
Martinez-Haro, Monica; Acevedo, Pelayo; Pais-Costa, Antónia Juliana; Taggart, Mark A; Martins, Irene; Ribeiro, Rui; Marques, João Carlos
2016-05-01
In situ assays based on feeding depression can be powerful ecotoxicological tools that can link physiological organism-level responses to population and/or community-level effects. Amphipods are traditional target species for toxicity tests due to their high sensitivity to contaminants, availability in the field and ease of handling. However, cost-effective in situ assays based on feeding depression are not yet available for amphipods that inhabit estuarine ecosystems. The aim of this work was to assess a short-term in situ assay based on postexposure feeding rates on easily quantifiable food items with an estuarine amphipod. Experiments were carried out under laboratory conditions using juvenile Echinogammarus marinus as the target individual. When 60 Artemia franciscana nauplii (as prey) were provided per individual for a period of 30 min in dark conditions, feeding rates could be easily quantified. As an endpoint, postexposure feeding inhibition in E. marinus was more sensitive to cadmium contamination than mortality. Assay calibration under field conditions demonstrated the relevance of sediment particle size in explaining individual feeding rates in uncontaminated water bodies. An evaluation of the 48-h in situ bioassay based on postexposure feeding rates indicated that it is able to discriminate between unpolluted and polluted estuarine sites. Using the harmonized protocol described here, the in situ postexposure feeding assay with E. marinus was found to be a potentially useful, cost-effective tool for assessing estuarine sediment and water quality. Copyright © 2016 Elsevier Ltd. All rights reserved.
40 CFR 63.606 - Performance tests and compliance provisions.
Code of Federal Regulations, 2011 CFR
2011-07-01
... Where: Mp = total mass flow rate of phosphorus-bearing feed, metric ton/hr (ton/hr). Rp = P2O5 content... determine the mass flow rate (Mp) of the phosphorus-bearing feed. (ii) The P2O5 content (Rp) of the feed..., No. 1 Preparation of Sample. (B) Section IX, Methods of Analysis For Phosphate Rock, No. 3 Phosphorus...
40 CFR 63.606 - Performance tests and compliance provisions.
Code of Federal Regulations, 2010 CFR
2010-07-01
... Where: Mp = total mass flow rate of phosphorus-bearing feed, metric ton/hr (ton/hr). Rp = P2O5 content... determine the mass flow rate (Mp) of the phosphorus-bearing feed. (ii) The P2O5 content (Rp) of the feed..., No. 1 Preparation of Sample. (B) Section IX, Methods of Analysis For Phosphate Rock, No. 3 Phosphorus...
Li, Meng-Meng; Shi, Hong-Zhuan; Guo, Qiao-Sheng; Wang, Jia; Dai, Dao-Xin
2016-08-01
The oxygen consumption, oxygen consumption rate and suffocation point of different quality Whitmania pigra and Bellamya purificata were determined by hydrostatic breathing room method. The effects of feeding modes on growth of W.pigra were determined by biomass. The results showed that the oxygen consumption correlated positively with the weight of W.pigra and B. purificata(P<0.05), suffocation point increased with the increases of the weight(P<0.05).Oxygen consumption correlated negatively with the weight of W. pigra, the oxygen consumption rate of B.purificata first increased and then decreased with the increasing of the weight. Feeding modes had no significant effects on the finial weight, SGR, WGR, death rates of W. pigra. Feeding modes had significant effects on eating ratio. It suggested that the optimum feeding frequency of W. pigra was once every three days. Scientific and reasonable feeding amount of B. purificata should be calculated based on oxygen consumption and suffocation point of W.pigra and B.purificata at every period. Meanwhile, stocking density, water area and water exchanging frequency should be taken into consideration. Copyright© by the Chinese Pharmaceutical Association.
Effects of temperature on embryonic development of lake herring (Coregonus artedii)
Colby, Peter J.; Brooke, L.T.
1973-01-01
Embryonic development of lake herring (Coregonus artedii) was observed in the laboratory at 13 constant temperatures from 0.0 to 12.1 C and in Pickerel Lake (Washtenaw County, Michigan) at natural temperature regimes. Rate of development during incubation was based on progression of the embryos through 20 identifiable stages. An equation was derived to predict development stage at constant temperatures, on the general assumption that development stage (DS) is a function of time (days, D) and temperature (T). The equation should also be useful in interpreting estimates from future regressions that include other environmental variables that affect egg development. A second regression model, derived primarily for fluctuating temperatures, related development rate for stage j (DRj), expressed as the reciprocal of time, to temperature (x). The generalized equation for a development stage is: DRj = abx cx2 dx3. In general, time required for embryos to reach each stage of development in Pickerel Lake agreed closely with the time predicted from this equation, derived from our laboratory observations. Hatching time was predicted within 1 day in 1969 and within 2 days in 1970. We used the equations derived with the second model to predict the effect of the superimposition of temperature increases of 1 and 2 C on the measured temperatures in Pickerel Lake. Conceivably, hatching dates could be affected sufficiently to jeopardize the first feeding of lake herring through loss of harmony between hatching date and seasonal food availability.
Niu, M; Ying, Y; Bartell, P A; Harvatine, K J
2014-12-01
The timing of feed intake entrains circadian rhythms regulated by internal clocks in many mammals. The objective of this study was to determine if the timing of feeding entrains daily rhythms in dairy cows. Nine Holstein cows were used in a replicated 3 × 3 Latin square design with 14-d periods. An automated system recorded the timing of feed intake over the last 7 d of each period. Treatments were feeding 1×/d at 0830 h (AM) or 2030 h (PM) and feeding 2×/d in equal amounts at 0830 and 2030 h. All treatments were fed at 110% of daily intake. Cows were milked 2×/d at 0500 and 1700 h. Milk yield and composition were not changed by treatment. Daily intake did not differ, but twice-daily feeding tended to decrease total-tract digestibility of organic matter and neutral detergent fiber (NDF). A treatment by time of day interaction was observed for feeding behavior. The amount of feed consumed in the first 2h after feeding was 70% greater for PM compared with AM feeding. A low rate of intake overnight (2400 to 0500 h; 2.2 ± 0.74% daily intake/h, mean ± SD) and a moderate rate of intake in the afternoon (1200 to 1700 h; 4.8 ± 1.1% daily intake/h) was noted for all treatments, although PM slightly reduced the rate during the afternoon period compared with AM. A treatment by time of day interaction was seen for fecal NDF and indigestible NDF (iNDF) concentration, blood urea nitrogen, plasma glucose and insulin concentrations, body temperature, and lying behavior. Specifically, insulin increased and glucose decreased more after evening feeding than after morning feeding. A cosine function within a 24-h period was used to characterize daily rhythms using a random regression. Rate of feed intake during spontaneous feeding, fecal NDF and iNDF concentration, plasma glucose, insulin, NEFA, body temperature, and lying behavior fit a cosine function within a 24-h period that was modified by treatment. In conclusion, feeding time can reset the daily rhythms of feeding and lying behavior, core body temperature, fecal NDF and iNDF concentration, and plasma blood urea nitrogen, glucose, and insulin concentration of dairy cows, but has no effect on daily DMI and milk production. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.
A Cyberworm that Knows no Boundaries
2011-01-01
Stack, 2009. During Iran’s so-called “Twitter revolution,” Twitter feeds off ered a constant stream of situational updates and links to photos and...20090721141526-32619.pdf Baldor, Lolita , “Pentagon Gets Cyberwar Guidelines,” Associated Press, June 22, 2011. Balkovich, Edward, email to the authors
Shigematsu, Hideki; Kawaguchi, Masahiko; Hayashi, Hironobu; Takatani, Tsunenori; Iwata, Eiichiro; Tanaka, Masato; Okuda, Akinori; Morimoto, Yasuhiko; Masuda, Keisuke; Tanaka, Yuu; Tanaka, Yasuhito
2017-10-01
During spine surgery, the spinal cord is electrophysiologically monitored via transcranial electrical stimulation of motor-evoked potentials (TES-MEPs) to prevent injury. Transcranial electrical stimulation of motor-evoked potential involves the use of either constant-current or constant-voltage stimulation; however, there are few comparative data available regarding their ability to adequately elicit compound motor action potentials. We hypothesized that the success rates of TES-MEP recordings would be similar between constant-current and constant-voltage stimulations in patients undergoing spine surgery. The objective of this study was to compare the success rates of TES-MEP recordings between constant-current and constant-voltage stimulation. This is a prospective, within-subject study. Data from 100 patients undergoing spinal surgery at the cervical, thoracic, or lumbar level were analyzed. The success rates of the TES-MEP recordings from each muscle were examined. Transcranial electrical stimulation with constant-current and constant-voltage stimulations at the C3 and C4 electrode positions (international "10-20" system) was applied to each patient. Compound muscle action potentials were bilaterally recorded from the abductor pollicis brevis (APB), deltoid (Del), abductor hallucis (AH), tibialis anterior (TA), gastrocnemius (GC), and quadriceps (Quad) muscles. The success rates of the TES-MEP recordings from the right Del, right APB, bilateral Quad, right TA, right GC, and bilateral AH muscles were significantly higher using constant-voltage stimulation than those using constant-current stimulation. The overall success rates with constant-voltage and constant-current stimulations were 86.3% and 68.8%, respectively (risk ratio 1.25 [95% confidence interval: 1.20-1.31]). The success rates of TES-MEP recordings were higher using constant-voltage stimulation compared with constant-current stimulation in patients undergoing spinal surgery. Copyright © 2017 Elsevier Inc. All rights reserved.
Elongational flow of polymer melts at constant strain rate, constant stress and constant force
NASA Astrophysics Data System (ADS)
Wagner, Manfred H.; Rolón-Garrido, Víctor H.
2013-04-01
Characterization of polymer melts in elongational flow is typically performed at constant elongational rate or rarely at constant tensile stress conditions. One of the disadvantages of these deformation modes is that they are hampered by the onset of "necking" instabilities according to the Considère criterion. Experiments at constant tensile force have been performed even more rarely, in spite of the fact that this deformation mode is free from necking instabilities and is of considerable industrial relevance as it is the correct analogue of steady fiber spinning. It is the objective of the present contribution to present for the first time a full experimental characterization of a long-chain branched polyethylene melt in elongational flow. Experiments were performed at constant elongation rate, constant tensile stress and constant tensile force by use of a Sentmanat Extensional Rheometer (SER) in combination with an Anton Paar MCR301 rotational rheometer. The accessible experimental window and experimental limitations are discussed. The experimental data are modelled by using the Wagner I model. Predictions of the steady-start elongational viscosity in constant strain rate and creep experiments are found to be identical, albeit only by extrapolation of the experimental data to Hencky strains of the order of 6. For constant stress experiments, a minimum in the strain rate and a corresponding maximum in the elongational viscosity is found at a Hencky strain of the order of 3, which, although larger than the steady-state value, follows roughly the general trend of the steady-state elongational viscosity. The constitutive analysis also reveals that constant tensile force experiments indicate a larger strain hardening potential than seen in constant elongation rate or constant tensile stress experiments. This may be indicative of the effect of necking under constant elongation rate or constant tensile stress conditions according to the Considère criterion.
Bi, Hong-Juan; Xu, Jing; Wei, Qiu-Fen
2018-02-01
To investigate the role of donor human milk in the prevention of nosocomial infection in very low birth weight infants. MeETHODS: A total of 105 hospitalized preterm infants with a very low birth weight were enrolled. They were classified into mother's own milk feeding group, donor human milk feeding group, and preterm formula feeding group, with 35 infants in each group. The three groups were compared in terms of incidence rates of nosocomial infection, necrotizing enterocolitis, and feeding intolerance, time to full enteral feeding, and early growth indices. Compared with the preterm formula feeding group, the donor human milk feeding group and the mother's own milk feeding group had significantly lower incidence rates of nosocomial infection and necrotizing enterocolitis and shorter time to full enteral feeding (P<0.05). There were no significant differences in head circumference, body length, and weight growth velocity among the three groups. Donor human milk can be used in case of a lack of mother's own milk and may help to reduce nosocomial infection.
Instanton rate constant calculations close to and above the crossover temperature.
McConnell, Sean; Kästner, Johannes
2017-11-15
Canonical instanton theory is known to overestimate the rate constant close to a system-dependent crossover temperature and is inapplicable above that temperature. We compare the accuracy of the reaction rate constants calculated using recent semi-classical rate expressions to those from canonical instanton theory. We show that rate constants calculated purely from solving the stability matrix for the action in degrees of freedom orthogonal to the instanton path is not applicable at arbitrarily low temperatures and use two methods to overcome this. Furthermore, as a by-product of the developed methods, we derive a simple correction to canonical instanton theory that can alleviate this known overestimation of rate constants close to the crossover temperature. The combined methods accurately reproduce the rate constants of the canonical theory along the whole temperature range without the spurious overestimation near the crossover temperature. We calculate and compare rate constants on three different reactions: H in the Müller-Brown potential, methylhydroxycarbene → acetaldehyde and H 2 + OH → H + H 2 O. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.
Halecky, Martin; Paca, Jan; Kozliak, Evguenii; Jones, Kim
2016-07-02
A 2:1 (w/w) mixture of styrene (STY) and acetone (AC) was subjected to lab-scale biofiltration under varied loading in both a trickle bed reactor (TBR) and biofilter (BF) to investigate substrate interactions and determine the limits of biofiltration efficiency of typical binary air pollutant mixtures containing both hydrophobic and polar components. A comparison of the STY/AC mixture degradation in the TBR and BF revealed higher pollutant removal efficiencies and degradation rates in the TBR, with the pollutant concentrations increasing up to the overloading limit. The maximum styrene degradation rates were 12 and 8 gc m(-3) h(-1) for the TBR and BF, respectively. However, the order of performance switched in favor of the BF when the loading was conducted by increasing air flow rate while keeping the inlet styrene concentration (Cin) constant in contrast to loading by increasing Cin. This switch may be due to a drastic difference in the effective surface area between these two reactors, so the biofilter becomes the reactor of choice when the rate-limiting step switches from biochemical processes to mass transfer by changing the loading mode. The presence of acetone in the mixture decreased the efficiency of styrene degradation and its degradation rate at high loadings. When the overloading was lifted by lowering the pollutant inlet concentrations, short-term back-stripping of both substrates in both reactors into the outlet air was observed, with a subsequent gradual recovery taking several hours and days in the BF and TBR, respectively. Removal of excess biomass from the TBR significantly improved the reactor performance. Identification of the cultivable strains, which was performed on Day 763 of continuous operation, showed the presence of 7 G(-) bacteria, 2 G(+) bacteria and 4 fungi. Flies and larvae of Lycoriella nigripes survived half a year of the biofilter operation by feeding on the biofilm resulting in the maintenance of a nearly constant pressure drop.
Factors affecting the process performance of biofiltration
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kopchynski, D.M.; Farmer, R.W.; Maier, W.J.
1996-11-01
Biofiltration is an emerging biological treatment technology for the removal of airborne VOCs from industrial process waste streams. Removal of air-phase VOCs by biofiltration is accomplished by contacting a process airstream with an active microbial biofilm attached to a solid phase packing. VOCs that partition into the biofilm are aerobically oxidized to the endproducts of water, carbon dioxide and salts. A multiple reactor biofiltration pilot plant test program has been in progress at the University of Minnesota Environmental Engineering Laboratories since 1992. The primary goal of the program is to study factors that affect biofiltration process performance. Initial results ofmore » this test program were reported in a previous conference paper and master`s thesis. This paper presents the results of more recent studies that focus on the effects of: (1) biofilm accumulation (which in turn causes a decrease in biofilter bed porosity and packing bed surface area), (2) rates of nutrient addition, and (3) chemical properties of the target contaminant, on biofiltration removal performance. Removal performance was evaluated by determining biofilter removal capacities and efficiencies for various substrate feeds. The performance parameters were measured under constant contaminant inlet concentrations and under constant temperature. Three VOCs were selected for study and they are: MEK, (methyl ethyl ketone), xylene, and hexane. MEK, xylene, and hexane were chosen because they are representative of widely used industrial solvents and they have significantly different Henry`s law constants relative to each other (the MEK value < Xylene value < Hexane value). Henry`s law constants quantify the partitioning of a chemical between the air and water-biofilm phase and therefore can be used to correlate the effect of chemical properties on biofilter removal capacities. This paper also introduces a new model for the biofiltration process.« less
Nasoenteral feeding tube placement by nurses using an electromagnetic guidance system (with video).
Mathus-Vliegen, Elisabeth M H; Duflou, Ann; Spanier, Marcel B W; Fockens, Paul
2010-04-01
The early institution of feeding in patients who need postpyloric feeding tubes is often hampered by a limited availability of endoscopists experienced in safe tube positioning. To test the feasibility of having nurses place postpyloric feeding tubes by using a universal path finding system device. Prospective study. Academic hospital. The success rate and learning curve of a senior nurse placing postpyloric feeding tubes in 50 patients was studied, followed by a study in 160 patients on the success rates and learning curves of 4 inexperienced nurses instructed by the senior nurse. Finally, the success rate of postpyloric feeding tube placement by the senior nurse in 50 critically ill patients was investigated. Postpyloric feeding tube positioning by nurses using an electromagnetic universal path-finding system device enabling them to follow the path of the tip of the feeding tube on a monitor screen. Success was defined by postpyloric positioning of the feeding tube. The ultimate aim was to reach at least the duodenojejunal flexure. In the first part, the senior nurse was successful in 72% of cases. There was a clear learning curve. In the second part, the 4 newly instructed nurses had a success rate of 89.4% without an evident learning curve. In the third part, successful feeding tube positioning was achieved in 78% of critically ill patients. Of the 217 successfully positioned tubes, 74% reached at least the duodenojejunal flexure. In half of the unsuccessful cases, an explanation for the failure was found at endoscopy. No complications were seen. The generalization to less-specialized hospitals should be investigated. Postpyloric positioning of feeding tubes by nurses at the bedside without endoscopy is feasible and safe. Nurses may take over some of the tasks of doctors in a time of high endoscopic needs. Copyright 2010 American Society for Gastrointestinal Endoscopy. Published by Mosby, Inc. All rights reserved.
Infant survival, HIV infection, and feeding alternatives in less-developed countries.
Kuhn, L; Stein, Z
1997-01-01
OBJECTIVES: This study examines, in the context of the human immunodeficiency virus (HIV) epidemic, the effects of optimal breast-feeding, complete avoidance of breast-feeding, and early cessation of breast-feeding. METHODS: The three categories of breast-feeding were weighed in terms of HIV transmission and infant mortality. Estimates of the frequency of adverse outcomes were obtained by simulation. RESULTS: Avoidance of all breast-feeding by the whole population always produces the worst outcome. The lowest frequency of adverse outcomes occurs if no HIV-seropositive women breast-feed and all seronegative women breast-feed optimally, given infant mortality rates below 100 per 1000 and relative risks of dying set at 2.5 for non-breast-fed compared with optimally breast-fed infants. For known HIV-seropositive mothers, fewer adverse outcomes result from early cessation than from prolonged breast-feeding if the hazard of HIV transmission through breast-feeding after 3 months is 7% or more, even at high mortality rates, given relative risks of dying set at 1.5 for early cessation compared with optimal duration of breast-feeding. CONCLUSIONS: The risk of HIV transmission through breast-feeding at various ages needs to be more precisely quantified. The grave issues that may accompany a possible decline in breast-feeding in the less developed world demand evaluation. PMID:9224171
Seidel, Allison K; Schetzina, Karen E; Freeman, Sherry C; Coulter, Meredith M; Colgrove, Nicole J
2013-03-01
Breast-feeding rates in rural and southeastern regions of the United States are lower than national rates and Healthy People 2020 targets. The objectives of this study were to understand current breast-feeding knowledge, attitudes, and beliefs among rural southern Appalachian adolescents and to explore whether a high school educational intervention designed to address the five tenets (knowledge, attitudes, intentions, perceived behavioral control, and subjective norms) of the theory of planned behavior may be effective in increasing future rates of breast-feeding in this population. An educational session including an interactive game was developed and administered to occupational health science students during a single class period in two county high schools. A presurvey and a postsurvey administered 2 weeks after the intervention were completed by students. Pre- and postsurveys were analyzed using paired t tests and Cohen d and potential differences based on sex and grade were explored. Both pre- and postsurveys were completed by 107 students (78%). Knowledge, attitudes about breast-feeding benefits, subjective norms, and intentions significantly improved following the intervention. Baseline knowledge and attitudes about breast-feeding benefits for mothers were low and demonstrated the greatest improvement. Offering breast-feeding education based on the theory of planned behavior in a single high school class session was effective in improving student knowledge, attitudes, and beliefs about breast-feeding and intention to breast-feed.
Icelandic herring-eating killer whales feed at night.
Richard, Gaëtan; Filatova, Olga A; Samarra, Filipa I P; Fedutin, Ivan D; Lammers, Marc; Miller, Patrick J
2017-01-01
Herring-eating killer whales debilitate herring with underwater tail slaps and likely herd herring into tighter schools using a feeding-specific low-frequency pulsed call ('herding' call). Feeding on herring may be dependent upon daylight, as the whales use their white underside to help herd herring; however, feeding at night has not been investigated. The production of feeding-specific sounds provides an opportunity to use passive acoustic monitoring to investigate feeding behaviour at different times of day. We compared the acoustic behaviour of killer whales between day and night, using an autonomous recorder deployed in Iceland during winter. Based upon acoustic detection of underwater tail slaps used to feed upon herring we found that killer whales fed both at night and day: they spent 50% of their time at night and 73% of daytime feeding. Interestingly, there was a significant diel variation in acoustic behaviour. Herding calls were significantly associated with underwater tail slap rate and were recorded significantly more often at night, suggesting that in low-light conditions killer whales rely more on acoustics to herd herring. Communicative sounds were also related to underwater tail slap rate and produced at different rates during day and night. The capability to adapt feeding behaviour to different light conditions may be particularly relevant for predator species occurring in high latitudes during winter, when light availability is limited.
Bioprocess and downstream optimization of recombinant human growth hormone in Pichia pastoris
Azadi, Saeed; Sadjady, Seyed Kazem; Mortazavi, Seyed Alireza; Naghdi, Nasser; Mahboubi, Arash; Solaimanian, Roya
2018-01-01
The methylotrophic yeast Pichia pastoris is a well-established expression host, which is often used in the production of protein pharmaceuticals. This work aimed to evaluate the effect of various concentrations of ascorbic acid in mixed feeding strategy with sorbitol/methanol on productivity of recombinant human growth hormone (r-hGH). The relevant concentration of ascorbic acid (5, 10, or 20 mmol) and 50 g/L sorbitol were added in batch-wise mode to the medium at the beginning of induction phase. The rate of methanol addition was increased stepwise during the first 12 h of production and then kept constant. Total protein and r-hGH concentrations were analyzed and the results compared with sorbitol/methanol feeding using one-way analysis of variance. Moreover, an effective clarification process using activated carbon was developed to remove process contaminants like pigments and endotoxins. Finally, a three-step chromatographic process was applied to purify the product. According to the obtained results, addition of 10 mmol ascorbic acid to sorbitol/methanol co-feeding could significantly increase cell biomass (1.7 fold), total protein (1.14 fold), and r-hGH concentration (1.43 fold). One percent activated carbon could significantly decrease pigments and endotoxins without any significant changes in r-hGH assay. The result of the study concluded that ascorbic acid in combination with sorbitol could effectively enhance the productivity of r-hGH. This study also demonstrated that activated carbon clarification is a simple method for efficient removal of endotoxin and pigment in production of recombinant protein in the yeast expression system. PMID:29853932
Dreassi, Elena; Cito, Annarita; Zanfini, Assunta; Materozzi, Lara; Botta, Maurizio; Francardi, Valeria
2017-03-01
Fat is the second most abundant component of the nutrient composition of the mealworm Tenebrio molitor (Coleoptera: Tenebrionidae) that represents also an interesting source of PUFA, especially n-6 and n-3 fatty acids, involved in prevention of cardiovascular diseases. This study investigated the possibility of modifying the fat content and the FA composition of yellow mealworms through feeding and how this would be influenced by developmental stages, pupal sex, and generation with the future aim of applying this coleopteran as a diet supplement for human health. Growth rate and cumulative mortality percentage on the different feeding substrates were also evaluated to select the optimal conditions for a mass-raising of this insect species. Despite the different fat content in the six different breeding substrates used, T. molitor larvae and pupae contained a constant fat percentage (>34% in larvae and >30% in pupae). A similar total fat content was found comparing larvae and male and female pupae of the second generation to those of the first generation. On the contrary, FA composition differed both in larvae and pupae reared on the different feeding substrates. However, the exemplars reared on the diets based on 100% bread and 100% oat flour showed SFA, PUFA percentages, and an n-6/n-3 ratio more suitable for human consumption; the diet based on beer yeast, wheat flour, and oat flour resulted in a contemporary diet that most satisfied the balance between a fat composition of high quality and favorable growth conditions.
Hospital-wide breastfeeding rates vs. breastmilk provision for very-low-birth-weight infants.
Lee, Henry C; Jegatheesan, Priya; Gould, Jeffrey B; Dudley, Raymond A
2013-03-01
To investigate the relationship between breastmilk feeding in very-low-birth-weight infants in the neonatal intensive care unit and breastmilk feeding rates for all newborns by hospital. This was a cross-sectional study of 111 California hospitals in 2007 and 2008. Correlation coefficients were calculated between overall hospital breastfeeding rates and breastmilk feeding rates of very-low-birth-weight infants. Hospitals were categorized in quartiles by crude and adjusted very-low-birth-weight infant rates to compare rankings between measures. Correlation between breastmilk feeding rates of very-low-birth-weight infants and overall breastfeeding rates varied by neonatal intensive care unit level of care from 0.13 for intermediate hospitals to 0.48 for regional hospitals. For hospitals categorized in the top quartile according to overall breastfeeding rate, only 46% were in the top quartile for both crude and adjusted very-low-birth-weight infant rates. On the other hand, when considering the lowest quartile for overall breastfeeding hospitals, three of 27 (11%) actually were performing in the top quartile of performance for very-low-birth-weight infant rates. Reporting hospital overall breastfeeding rates and neonatal intensive care unit breastmilk provision rates separately may give an incomplete picture of quality of care. ©2012 The Author(s)/Acta Paediatrica ©2012 Foundation Acta Paediatrica.
Khait, Ruth; Obolski, Uri; Hadany, Lilach; Genin, Amatzia
2013-01-01
Most herbivorous coral-reef fishes feed slower in the morning than in the afternoon. Given the typical scarcity of algae in coral reefs, this behavior seems maladaptive. Here we suggest that the fishes' slow feeding during the morning is an outcome of highly selective feeding on scarcely found green algae. The rarity of the food requires longer search time and extended swimming tracks, resulting in lower bite rates. According to our findings by noon the fish seem to stop their search and switch to indiscriminative consumption of benthic algae, resulting in apparent higher feeding rates. The abundance of the rare preferable algae gradually declines from morning to noon and seems to reach its lowest levels around the switch time. Using in situ experiments we found that the feeding pattern is flexible, with the fish exhibiting fast feeding rates when presented with ample supply of preferable algae, regardless of the time of day. Analyses of the fish's esophagus content corroborated our conclusion that their feeding was highly selective in the morning and non-selective in the afternoon. Modeling of the fishes' behavior predicted that the fish should perform a diel diet shift when the preferred food is relatively rare, a situation common in most coral reefs found in a warm, oligotrophic ocean. PMID:24358178
Khait, Ruth; Obolski, Uri; Hadany, Lilach; Genin, Amatzia
2013-01-01
Most herbivorous coral-reef fishes feed slower in the morning than in the afternoon. Given the typical scarcity of algae in coral reefs, this behavior seems maladaptive. Here we suggest that the fishes' slow feeding during the morning is an outcome of highly selective feeding on scarcely found green algae. The rarity of the food requires longer search time and extended swimming tracks, resulting in lower bite rates. According to our findings by noon the fish seem to stop their search and switch to indiscriminative consumption of benthic algae, resulting in apparent higher feeding rates. The abundance of the rare preferable algae gradually declines from morning to noon and seems to reach its lowest levels around the switch time. Using in situ experiments we found that the feeding pattern is flexible, with the fish exhibiting fast feeding rates when presented with ample supply of preferable algae, regardless of the time of day. Analyses of the fish's esophagus content corroborated our conclusion that their feeding was highly selective in the morning and non-selective in the afternoon. Modeling of the fishes' behavior predicted that the fish should perform a diel diet shift when the preferred food is relatively rare, a situation common in most coral reefs found in a warm, oligotrophic ocean.
[Assessment of breast feeding rates during compulsory vaccination: preliminary outcomes].
Candriella, M; Uga, E; Perino, A; Angilella, G; Alloni, V; Trada, M; Grossi, L; Tripaldi, C; Bagnasco, G; Silano, V; Olmo, L M; Allen, M; Provera, S
2009-02-01
In consideration of the World Health Organization (WHO) recommendations on promoting and supporting breast feeding, a measurement of breast feeding rates was planned within Vercelli's Province (ASL 11, Piedmont, Italy) in order to compare the local situation to the national and international one, and to promote ideas and strategies for increasing the practice of breast feeding up to six months or beyond. During Diptheria Tetanus whole cell Pertussis vaccination (DTP) vaccination a questionnaire about their children's feeding was handed out to all mothers. Preliminary outcomes were elaborated after a follow-up of six months. So far 1591 questionnaires have been collected. During the first DTP immunizations 31.63% of the children were exclusively breastfed and 15.81% were partially breastfed. At the second vaccination, 11.14% and 37.68% of infants were completely and partially breastfed, respectively. A 36.11% of partially breast feeding still emerged during the third DTP vaccination. The outcomes of this study are inferior compared to WHO expectation and to national statistics. Increasing breast feeding rates should consequently become a priority aim, pursuing it through the health workers training, the support of mothers who encounter difficulties during their hospital stay or at home, and making the public aware of breast feeding practices.
DOE Office of Scientific and Technical Information (OSTI.GOV)
MARCIAL J; KRUGER AA; HRMA PR
2010-07-28
The behavior of melter feed (a mixture of nuclear waste and glass-forming additives) during waste-glass processing has a significant impact on the rate of the vitrification process. We studied the effects of silica particle size and sucrose addition on the volumetric expansion (foaming) of a high-alumina feed and the rate of dissolution of silica particles in feed samples heated at 5 C/min up to 1200 C. The initial size of quartz particles in feed ranged from 5 to 195 {micro}m. The fraction of the sucrose added ranged from 0 to 0.20 g per g glass. Extensive foaming occurred only inmore » feeds with 5-{micro}m quartz particles; particles {ge}150 {micro}m formed clusters. Particles of 5 {micro}m completely dissolved by 900 C whereas particles {ge}150 {micro}m did not fully dissolve even when the temperature reached 1200 C. Sucrose addition had virtually zero impact on both foaming and the dissolution of silica particles. Over 100 sites in the United States are currently tasked with the storage of nuclear waste. The largest is the Hanford Site located in southeastern Washington State with 177 subterranean tanks containing over fifty-million gallons of nuclear waste from plutonium production from 1944 through 1987. This waste will be vitrified at the Hanford Tank Waste Treatment and Immobilization Plant. In the vitrification process, feed is charged into a melter and converted into glass to be ultimately stored in a permanent repository. The duration of waste-site cleanups by the vitrification process depends on the rate of melting, i.e., on the rate of the feed-to-glass conversion. Foaming associated with the melting process and the rate of dissolution of quartz particles (silica being the major glass-forming additive) are assumed to be important factors that influence the rate of melting. Previous studies on foaming of high-alumina feed demonstrated that varying the makeup of a melter feed has a significant impact on foaming. The volume of feeds that contained 5-{micro}m quartz particles substantially increased because of foaming. The extent of foaming decreased as the particle size of quartz increased. Moreover, samples containing quartz particles 195 {micro}m formed agglomerates at temperatures above 900 C that only slowly dissolved in the melt. This study continues previous work on the feed-melting process, specifically on the effects of the size of silica particles on the formation of nuclear-waste glasses to determine a suitable range of silica particle sizes that causes neither excessive foaming nor undesirable agglomeration. Apart from varying the silica-particle size, carbon was added in the form of sucrose. Sucrose has been used to accelerate the rate of melting. In this study, we have observed its impact on feed foaming and quartz dissolution.« less
Zong, Jie; Shao, Qi; Zhang, Hong-Qing; Pan, Yong-Lan; Zhu, Hua-Xu; Guo, Li-Wei
2014-02-01
To investigate moisture content and hygroscopicity of spray dry powder of Gubi compound's water extract obtained at different spray drying conditions and laying a foundation for spray drying process of Chinese herbal compound preparation. In the paper, on the basis of single-factor experiments, the author choose inlet temperature, liquid density, feed rate, air flow rate as investigated factors. The experimental absorption rate-time curve and scanning electron microscopy results showed that under different spray drying conditions the spray-dried powders have different morphology and different adsorption process. At different spray-dried conditions, the morphology and water content of the powder is different, these differences lead to differences in the adsorption process, at the appropriate inlet temperature and feed rate with a higher sample density and lower air flow rate, in the experimental system the optimum conditions is inlet temperature of 150 degrees C, feed density of 1.05 g x mL(-1), feed rate of 20 mL x min(-1) air flow rate of 30 m3 x h(-1).
NASA Technical Reports Server (NTRS)
Kurylo, M. J.; Cornett, K. D.; Murphy, J. L.
1982-01-01
The rate constant for the reaction of hydroxyl radicals with nitric acid in the 225-443 K temperature range has been measured by means of the flash photolysis resonance fluorescence technique. Above 300 K, the rate constant levels off in a way that can only be explained by the occurrence of two reaction channels, of which one, operative at low temperatures, proceeds through the formation of an adduct intermediate. The implications of these rate constant values for stratospheric reaction constants is discussed.
Stankovich, Joseph J; Gritti, Fabrice; Stevenson, Paul G; Beaver, Lois A; Guiochon, Georges
2014-01-17
Five methods for controlling the mobile phase flow rate for gradient elution analyses using very high pressure liquid chromatography (VHPLC) were tested to determine thermal stability of the column during rapid gradient separations. To obtain rapid separations, instruments are operated at high flow rates and high inlet pressure leading to uneven thermal effects across columns and additional time needed to restore thermal equilibrium between successive analyses. The purpose of this study is to investigate means to minimize thermal instability and obtain reliable results by measuring the reproducibility of the results of six replicate gradient separations of a nine component RPLC standard mixture under various experimental conditions with no post-run times. Gradient separations under different conditions were performed: constant flow rates, two sets of constant pressure operation, programmed flow constant pressure operation, and conditions which theoretically should yield a constant net heat loss at the column's wall. The results show that using constant flow rates, programmed flow constant pressures, and constant heat loss at the column's wall all provide reproducible separations. However, performing separations using a high constant pressure with programmed flow reduces the analysis time by 16% compared to constant flow rate methods. For the constant flow rate, programmed flow constant pressure, and constant wall heat experiments no equilibration time (post-run time) was required to obtain highly reproducible data. Copyright © 2013 Elsevier B.V. All rights reserved.
40 CFR 63.606 - Performance tests and compliance provisions.
Code of Federal Regulations, 2014 CFR
2014-07-01
... P2O5 feed rate, metric ton/hr (ton/hr). K = conversion factor, 1000 mg/g (453,600 mg/lb). (2) Method... fluorides, g/metric ton (lb/ton) of equivalent P2O5 feed. Csi = concentration of total fluorides from... Where: Mp = total mass flow rate of phosphorus-bearing feed, metric ton/hr (ton/hr). Rp = P2O5 content...
40 CFR 63.606 - Performance tests and compliance provisions.
Code of Federal Regulations, 2013 CFR
2013-07-01
... P2O5 feed rate, metric ton/hr (ton/hr). K = conversion factor, 1000 mg/g (453,600 mg/lb). (2) Method... fluorides, g/metric ton (lb/ton) of equivalent P2O5 feed. Csi = concentration of total fluorides from... Where: Mp = total mass flow rate of phosphorus-bearing feed, metric ton/hr (ton/hr). Rp = P2O5 content...
40 CFR 63.606 - Performance tests and compliance provisions.
Code of Federal Regulations, 2012 CFR
2012-07-01
... P2O5 feed rate, metric ton/hr (ton/hr). K = conversion factor, 1000 mg/g (453,600 mg/lb). (2) Method... fluorides, g/metric ton (lb/ton) of equivalent P2O5 feed. Csi = concentration of total fluorides from... Where: Mp = total mass flow rate of phosphorus-bearing feed, metric ton/hr (ton/hr). Rp = P2O5 content...
Akobeng, Anthony K; Heller, Richard F
2007-06-01
Lack of breast feeding has been reported to be associated with a number of chronic childhood disorders. To use a recently described measure, the population impact number of eliminating a risk factor over a time period (PIN-ER-t), to quantify the burden of low rates of breast feeding in a UK population of babies born in 2002 with regard to asthma, coeliac disease and obesity. We performed literature searches for systematic reviews with meta-analyses that had investigated the association between breast feeding and asthma, coeliac disease and obesity. Based on these data, and published data on the prevalence of breast feeding and the prevalence of the disorders, we calculated PIN-ER-t and estimated the number of cases of each disorder which could be prevented by eliminating "no breast feeding" as a risk factor. In the population of the 596 122 babies born in England and Wales in 2002, the number of cases of asthma, coeliac disease and obesity that could be prevented over 7-9 years if "no breast feeding" as a risk factor was eliminated were 33 100 (95% CI 17,710 to 47,543), 2655 (95% CI 1937 to 3343) and 13639 (95% CI 7838 to 19308), respectively. The population burden of low breast feeding rates is high with regard to these chronic disorders. The use of PIN-ER-t allows the population burden of low breast feeding rates to be quantified and communicated in a way that will make it easier for both the general public and decision makers to understand.
Tarrant, Marie; Lok, Kris Yw; Fong, Daniel Yt; Lee, Irene Ly; Sham, Alice; Lam, Christine; Wu, Kendra M; Bai, Dorothy L; Wong, Ka Lun; Wong, Emmy My; Chan, Noel Pt; Dodgson, Joan E
2015-10-01
To investigate the effect of public hospitals in Hong Kong not accepting free infant formula from manufacturers on in-hospital formula supplementation rates and breast-feeding duration. Prospective cohort study. In-patient postnatal units of four public hospitals in Hong Kong. Two cohorts of breast-feeding mother-infant pairs (n 2560). Cohort 1 (n 1320) was recruited before implementation of the policy to stop accepting free infant formula and cohort 2 (n 1240) was recruited after policy implementation. Participants were followed prospectively for 12 months or until they stopped breast-feeding. The mean number of formula supplements given to infants in the first 24 h was 2·70 (sd 3·11) in cohort 1 and 1·17 (sd 1·94) in cohort 2 (P<0·001). The proportion of infants who were exclusively breast-fed during the hospital stay increased from 17·7 % in cohort 1 to 41·3 % in cohort 2 (P<0·001) and the risk of breast-feeding cessation was significantly lower in cohort 2 (hazard ratio=0·81; 95 % CI 0·73, 0·90). Participants who non-exclusively breast-fed during the hospital stay had a significantly higher risk of stopping any or exclusive breast-feeding. Higher levels of formula supplementation also increased the risk of breast-feeding cessation in a dose-response pattern. After implementation of a hospital policy to pay market price for infant formula, rates of in-hospital formula supplementation were reduced and the rates of in-hospital exclusive breast-feeding and breast-feeding duration increased.
Ecophysiology of Nais elinguis (Oligochaeta) in a brackish-water lagoon
NASA Astrophysics Data System (ADS)
Little, Colin
1984-02-01
Population densities of Nais elinguis Müller were determined in Swanpool, a brackish-water lagoon at Falmouth, Cornwall, U.K., over a four-year period. High densities were found only from January to May, usually with a peak in March. Significant negative correlations were shown between population density and both salinity and temperature. In laboratory tests, feeding rates remained unchanged from freshwater to 20‰ salinity (S), but declined above this salinity. Nais elinguis was shown to be a good osmoregulator, remaining hyperosmotic below 7‰ S, and hypo-osmotic above this. Feeding rate showed a Q 10 of approximately 2 from 1 to 25°C, but above this the rate declined. Feeding rate was unaffected between pH 6 and 11. Increased salinity to (10‰ S) did not influence the effect of temperature on feeding rate. This high salinity did reduce feeding rate at a pH of 10 and above. It is concluded that the physical and chemical variables considered are unlikely to be direct causal factors limiting populations of N. elinguis in Swanpool. The influence of food supply, competition, predation and changes in reproductive mode are discussed as possible controlling factors. It is shown that the population decline of N. elinguis in early summer usually coincides with the rise of populations of chironomid larvae.
Aboveground to belowground herbivore defense signaling in maize: A two-way street?
USDA-ARS?s Scientific Manuscript database
Insect pests that attempt to feed on the caterpillar-resistant maize genotype Mp708 encounter a potent, multi-pronged defense system that thwarts their invasion. First, these plants are on “constant alert” due to constitutively elevated levels of the phytohormone jasmonic acid that signals the plan...
A simple rule for the costs of vigilance: empirical evidence from a social forager.
Cowlishaw, Guy; Lawes, Michael J.; Lightbody, Margaret; Martin, Alison; Pettifor, Richard; Rowcliffe, J. Marcus
2004-01-01
It is commonly assumed that anti-predator vigilance by foraging animals is costly because it interrupts food searching and handling time, leading to a reduction in feeding rate. When food handling does not require visual attention, however, a forager may handle food while simultaneously searching for the next food item or scanning for predators. We present a simple model of this process, showing that when the length of such compatible handling time Hc is long relative to search time S, specifically Hc/S > 1, it is possible to perform vigilance without a reduction in feeding rate. We test three predictions of this model regarding the relationships between feeding rate, vigilance and the Hc/S ratio, with data collected from a wild population of social foragers (samango monkeys, Cercopithecus mitis erythrarchus). These analyses consistently support our model, including our key prediction: as Hc/S increases, the negative relationship between feeding rate and the proportion of time spent scanning becomes progressively shallower. This pattern is more strongly driven by changes in median scan duration than scan frequency. Our study thus provides a simple rule that describes the extent to which vigilance can be expected to incur a feeding rate cost. PMID:15002768
An exposure chamber, the "clambox", was developed to measure ventilation rate, sediment processing rate, and efficiency of pollutant uptake byMacoma nasuta Conrad, a surface surface deposit-feeding clams. Clams, collected from Yaquina, Bay, Oregon, USA, were cemented into a hole ...
Lee, Sang Joon; Kang, Dooho; Lee, Seung Chul; Ha, Young-Ran
2016-02-03
Female mosquitoes transmit various diseases as vectors during liquid-feeding. Identifying the determinants of vector efficiency is a major scientific challenge in establishing strategies against these diseases. Infection rate and transmission efficiency are interconnected with the mosquito-induced liquid-feeding flow as main indexes of vector efficiency. However, the relationship between liquid-feeding characteristics and pathogen remains poorly understood. The liquid-feeding behavior of Aedes togoi and Anopheles sinensis was comparatively investigated in conjunction with vector efficiency via micro-particle image velocimetry. The flow rates and ratio of the ejection volume of Aedes togoi were markedly higher than those of Anophels sinensis. These differences would influence pathogen re-ingestion. Wall shear stresses of these mosquito species were also clearly discriminatory affecting the infective rates of vector-borne diseases. The variations in volume of two pump chambers and diameter of proboscis of these mosquito species were compared to determine the differences in the liquid-feeding process. Liquid-feeding characteristics influence vector efficiency; hence, this study can elucidate the vector efficiency of mosquitoes and the vector-pathogen interactions and contribute to the development of strategies against vector-borne diseases.
NASA Astrophysics Data System (ADS)
Lee, Sang Joon; Kang, Dooho; Lee, Seung Chul; Ha, Young-Ran
2016-02-01
Female mosquitoes transmit various diseases as vectors during liquid-feeding. Identifying the determinants of vector efficiency is a major scientific challenge in establishing strategies against these diseases. Infection rate and transmission efficiency are interconnected with the mosquito-induced liquid-feeding flow as main indexes of vector efficiency. However, the relationship between liquid-feeding characteristics and pathogen remains poorly understood. The liquid-feeding behavior of Aedes togoi and Anopheles sinensis was comparatively investigated in conjunction with vector efficiency via micro-particle image velocimetry. The flow rates and ratio of the ejection volume of Aedes togoi were markedly higher than those of Anophels sinensis. These differences would influence pathogen re-ingestion. Wall shear stresses of these mosquito species were also clearly discriminatory affecting the infective rates of vector-borne diseases. The variations in volume of two pump chambers and diameter of proboscis of these mosquito species were compared to determine the differences in the liquid-feeding process. Liquid-feeding characteristics influence vector efficiency; hence, this study can elucidate the vector efficiency of mosquitoes and the vector-pathogen interactions and contribute to the development of strategies against vector-borne diseases.
NASA Technical Reports Server (NTRS)
Dingell, Charles W. (Inventor); Quintana, Clemente E. (Inventor); Le, Suy (Inventor); Clark, Michael R. (Inventor); Cloutier, Robert E. (Inventor); Hafermalz, David Scott (Inventor)
2009-01-01
A sublimator includes a sublimation plate having a thermal element disposed adjacent to a feed water channel and a control point disposed between at least a portion of the thermal element and a large pore substrate. The control point includes a sintered metal material. A method of dissipating heat using a sublimator includes a sublimation plate having a thermal element and a control point. The thermal element is disposed adjacent to a feed water channel and the control point is disposed between at least a portion of the thermal element and a large pore substrate. The method includes controlling a flow rate of feed water to the large pore substrate at the control point and supplying heated coolant to the thermal element. Sublimation occurs in the large pore substrate and the controlling of the flow rate of feed water is independent of time. A sublimator includes a sublimation plate having a thermal element disposed adjacent to a feed water channel and a control point disposed between at least a portion of the thermal element and a large pore substrate. The control point restricts a flow rate of feed water from the feed water channel to the large pore substrate independent of time.
Moisture effects on greenhouse gases generation in nitrifying gas-phase compost biofilters.
Maia, Guilherme D N; Day, George B; Gates, Richard S; Taraba, Joseph L; Coyne, Mark S
2012-06-01
Gas-phase compost biofilters are extensively used in concentrated animal feeding operations to remove odors and, in some cases, ammonia from air sources. The expected biochemical pathway for these predominantly aerobic systems is nitrification. However, non-uniform media with low oxygen levels can shift biofilter microbial pathways to denitrification, a source of greenhouse gases. Several factors contribute to the formation of anoxic/anaerobic zones: media aging, media and particle structure, air velocity distribution, compaction, biofilm thickness, and moisture content (MC) distribution. The present work studies the effects of media moisture conditions on ammonia (NH(3)) removal and greenhouse gas generation (nitrous oxide, N(2)O and methane, CH(4)) for gas-phase compost biofilters subject to a 100-day controlled drying process. Continuous recordings were made for the three gases and water vapor (2.21-h sampling cycle, each cycle consisted of three gas species, and water vapor, for a total of 10,050 data points). Media moisture conditions were classified into three corresponding media drying rate (DR) stages: Constant DR (wetter media), falling DR, and stable-dry system. The first-half of the constant DR period (0-750 h; MC=65-52%, w.b.) facilitated high NH(3) removal rates, but higher N(2)O generation and no CH(4) generation. At the drier stages of the constant DR (750-950 h; MC=52-48%, w.b.) NH(3) removal remained high but N(2)O net generation decreased to near zero. In the falling DR stage (1200-1480 h; MC=44-13%) N(2)O generation decreased, CH(4) increased, and NH(3) was no longer removed. No ammonia removal or greenhouse gas generation was observed in the stable-dry system (1500-2500 h; MC=13%). These results indicate that media should remain toward the drier region of the constant DR (in close proximity to the falling DR stage; MC=50%, approx.), to maintain high levels of NH(3) removal, reduced levels of N(2)O generation, and nullify levels of CH(4) generation. Copyright © 2012 Elsevier Ltd. All rights reserved.
40 CFR 60.224 - Test methods and procedures.
Code of Federal Regulations, 2010 CFR
2010-07-01
... the following equation: P=Mp Rp where: Mp=total mass flow rate of phosphorus-bearing feed, Mg/hr (ton... determine the mass flow rate (Mp) of the phosphorus-bearing feed. (ii) The Association of Official...
40 CFR 60.214 - Test methods and procedures.
Code of Federal Regulations, 2011 CFR
2011-07-01
... the following equation: P=Mp Rp where: Mp=total mass flow rate of phosphorus-bearing feed, Mg/hr (ton... determine the mass flow rate (Mp) of the phosphorus-bearing feed. (ii) The Association of Official...
40 CFR 60.214 - Test methods and procedures.
Code of Federal Regulations, 2010 CFR
2010-07-01
... the following equation: P=Mp Rp where: Mp=total mass flow rate of phosphorus-bearing feed, Mg/hr (ton... determine the mass flow rate (Mp) of the phosphorus-bearing feed. (ii) The Association of Official...
40 CFR 60.224 - Test methods and procedures.
Code of Federal Regulations, 2011 CFR
2011-07-01
... the following equation: P=Mp Rp where: Mp=total mass flow rate of phosphorus-bearing feed, Mg/hr (ton... determine the mass flow rate (Mp) of the phosphorus-bearing feed. (ii) The Association of Official...
Microwave characterization of slotline on high resistivity silicon for antenna feed network
NASA Technical Reports Server (NTRS)
Simons, Rainee N.; Taub, Susan R.; Lee, Richard Q.; Young, Paul G.
1993-01-01
Conventional silicon wafers have low resistivity and consequently unacceptably high value of dielectric attenuation constant. Microwave circuits for phased array antenna systems fabricated on these wafers therefore have low efficiency. By choosing a silicon substrate with sufficiently high resistivity it is possible to make the dielectric attenuation constant of the interconnecting microwave transmission lines approach those of GaAs or InP. In order for this to be possible, the transmission lines must be characterized. In this presentation, the effective dielectric constant (epsilon sub eff) and attenuation constant (alpha) of a slotline on high resistivity (5000 to 10 000 ohm-cm) silicon wafer will be discussed. The epsilon sub eff and alpha are determined from the measured resonant frequencies and the corresponding insertion loss of a slotline ring resonator. The results for slotline will be compared with microstrip line and coplanar waveguide.
Kinetics and bioreactor studies of immobilized invertase on polyurethane rigid adhesive foam.
Cadena, Pabyton G; Wiggers, Frank N; Silva, Roberto A; Lima Filho, José L; Pimentel, Maria C B
2011-01-01
A new support, polyurethane rigid adhesive foam (PRAF), which can be used to cover internal surface of metallic tubes, was used to immobilize invertase for application in an enzymatic bioreactor. The kinetic parameters were: Km--46.5±1.9 mM (PRAF-invertase) and 61.2±0.1 mM (free enzyme) and Vmax 42.0±4.3 U/mg protein/min (PRAF-invertase) and 445.3±24.0 U/mg protein/min (free invertase). The PRAF-invertase derivative maintained 50.1% of initial activity (69.17 U/g support) for 8 months (4°C) and was not observed microbial contamination. The bioreactor showed the best production of inverted sugar syrup using up-flow rate (0.48 L/h) with average conversion of 10.64±1.5% h(-1) at feeding rate (D) of 104 h(-1). The operational inactivation rate constant (kopi) and half-life were 1.92×10(-4) min(-1) and 60 h (continue use). The PRAF spray support looks promising as a new alternative to produce immobilized derivatives on reactor surfaces. Copyright © 2010 Elsevier Ltd. All rights reserved.
Breast-feeding initiation in low-income women: Role of attitudes, support, and perceived control.
Khoury, Amal J; Moazzem, S Wakerul; Jarjoura, Chad M; Carothers, Cathy; Hinton, Agnes
2005-01-01
Despite the documented health and emotional benefits of breast-feeding to women and children, breast-feeding rates are low among subgroups of women. In this study, we examine factors associated with breast-feeding initiation in low-income women, including Theory of Planned Behavior measures of attitude, support, and perceived control, as well as sociodemographic characteristics. A mail survey, with telephone follow-up, of 733 postpartum Medicaid beneficiaries in Mississippi was conducted in 2000. The breast-feeding initiation rate in this population was 38%. Women who were older, white, non-Hispanic, college-educated, married, not certified for the Supplemental Nutrition Program for Women, Infants, and Children, and not working full-time were more likely to breast-feed than formula-feed at hospital discharge. Attitudes regarding benefits and barriers to breast-feeding, as well as health care system and social support, were associated with breast-feeding initiation at the multivariate level. Adding the health care system support variables to the regression model, and specifically support from lactation specialists and hospital nurses, explained the association between breast-feeding initiation and women's perceived control over the time and social constraints barriers to breast-feeding. The findings support the need for health care system interventions, family interventions, and public health education campaigns to promote breast-feeding in low-income women.
Method for controlling gas metal arc welding
Smartt, H.B.; Einerson, C.J.; Watkins, A.D.
1987-08-10
The heat input and mass input in a Gas Metal Arc welding process are controlled by a method that comprises calculating appropriate values for weld speed, filler wire feed rate and an expected value for the welding current by algorithmic function means, applying such values for weld speed and filler wire feed rate to the welding process, measuring the welding current, comparing the measured current to the calculated current, using said comparison to calculate corrections for the weld speed and filler wire feed rate, and applying corrections. 3 figs., 1 tab.
Bittante, G; Cipolat-Gotet, C; Malchiodi, F; Sturaro, E; Tagliapietra, F; Schiavon, S; Cecchinato, A
2015-04-01
The objectives of this study were to characterize the variation in curd firmness model parameters obtained from coagulating bovine milk samples, and to investigate the effects of the dairy system, season, individual farm, and factors related to individual cows (days in milk and parity). Individual milk samples (n = 1,264) were collected during the evening milking of 85 farms representing different environments and farming systems in the northeastern Italian Alps. The dairy herds were classified into 4 farming system categories: traditional system with tied animals (29 herds), modern dairy systems with traditional feeding based on hay and compound feed (30 herds), modern dairy system with total mixed ration (TMR) that included silage as a large proportion of the diet (9 herds), and modern dairy system with silage-free TMR (17 herds). Milk samples were analyzed for milk composition and coagulation properties, and parameters were modeled using curd firmness measures (CFt) collected every 15 s from a lacto-dynamographic analysis of 90 min. When compared with traditional milk coagulation properties (MCP), the curd firming measures showed greater variability and yielded a more accurate description of the milk coagulation process: the model converged for 93.1% of the milk samples, allowing estimation of 4 CFt parameters and 2 derived traits [maximum CF (CF(max)) and time from rennet addition to CF(max) (t(max))] for each sample. The milk samples whose CFt equations did not converge showed longer rennet coagulation times obtained from the model (RCT(eq)) and higher somatic cell score, and came from less-productive cows. Among the sources of variation tested for the CFt parameters, dairy herd system yielded the greatest differences for the contrast between the traditional farm and the 3 modern farms, with the latter showing earlier coagulation and greater instant syneresis rate constant (k(SR)). The use of TMR yielded a greater tmax because of a higher instant curd-firming rate constant (k(CF)). Season of sampling was found to be very important, yielding higher values during winter for all traits except k(CF) and k(SR). All CFt traits were affected by individual cow factors. For parity, milk produced by first-lactation cows showed higher k(CF) and k(SR), but delays in achieving CF(max). With respect to stage of lactation, RCT(eq) and potential asymptotic CF increased during the middle of lactation and stabilized thereafter, whereas the 2 instant rate constants presented the opposite pattern, with the lowest (k(CF)) and highest (k(SR)) values occurring in mid lactation. The new challenge offered by prolonging the test interval and individual modeling of milk technological properties allowed us to study the effects of parameters related to the environment and to individual cows. This novel strategy may be useful for investigating the genetic variability of these new coagulation traits. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.
Ok, Jin Hee; Jeong, Hae Jin; Lim, An Suk; Lee, Kyung Ha
2017-09-01
The phototrophic dinoflagellate Takayama helix that is known to be harmful to abalone larvae has recently been revealed to be mixotrophic. Although mixotrophy elevates the growth rate of T. helix by 79%-185%, its absolute growth rate is still as low as 0.3d -1 . Thus, if the mortality rate of T. helix due to predation is high, this dinoflagellate may not easily prevail. To investigate potential effective protistan grazers on T. helix, feeding by diverse heterotrophic dinoflagellates such as engulfment-feeding Oxyrrhis marina, Gyrodinium dominans, Gyrodinium moestrupii, Polykrikos kofoidii, and Noctiluca scintillans, peduncle-feeding Aduncodinium glandula, Gyrodiniellum shiwhaense, Luciella masanensis, and Pfiesteria piscicida, pallium-feeding Oblea rotunda and Protoperidinium pellucidum, and the naked ciliates Pelagostrobilidium sp. (ca. 40μm in cell length) and Strombidinopsis sp. (ca. 150μm in cell length) on T. helix was explored. Among the tested heterotrophic protists, O. marina, G. dominans, G. moestrupii, A. glandula, L. masanensis, P. kofoidii, P. piscicida, and Strombidinopsis sp. were able to feed on T. helix. The growth rates of all these predators except Strombidinopsis sp. with T. helix prey were lower than those without the prey. The growth rate of Strombidinopsis sp. on T. helix was almost zero although the growth rate of Strombidinopsis sp. with T. helix prey was higher than those without the prey. Moreover, T. helix fed on O. marina and P. pellucidum and lysed the cells of P. kofoidii and G. shiwhaense. With increasing the concentrations of T. helix, the growth rates of O. marina and P. kofoidii decreased, but those of G. dominans and L. masanensis largely did not change. Therefore, reciprocal predation, lysis, no feeding, and the low ingestion rates of the common protists preying on T. helix may result in a low mortality rate due to predation, thereby compensating for this species' low growth rate. Copyright © 2017 Elsevier B.V. All rights reserved.
Beale, Norman; Kane, Gill; Gwynne, Mark; Peart, Carole; Taylor, Gordon; Herrick, David; Boyd, Andy
2006-01-11
Breast-feeding rates in the UK are known to vary by maternal socio-economic status but the latter function is imperfectly defined. We test if CTVB (Council Tax Valuation Band - a categorical assessment of UK property values and amenities governing local tax levies) of maternal address predicts, in a large UK regional sample of births, (a) breast-feeding (b) personal and socio-economic attributes of the mothers. Retrospective study of a subset (n.1390 selected at random) of the ALSPAC sample (Avon Longitudinal Study of Parents and Children), a large, geographically defined cohort of mothers followed from early pregnancy to 8 weeks post-delivery. Outcome measures are attitudes to breast-feeding prior to delivery, breast-feeding intention and uptake, demographic and socio-economic attributes of the mothers, CTVB of maternal home address at the time of each birth. Logistic regression analysis, categorical tests. 1360 women divided across the CTVBs--at least 155 in any band or band aggregation. CTVB predicted only one belief or attitude--that bottle-feeding was more convenient for the mother. However only 31% of 'CTVB A infants' are fully breast fed at 4 weeks of life whereas for 'CTVB E+ infants' the rate is 57%. CTVB is also strongly associated with maternal social class, home conditions, parental educational attainment, family income and smoking habit. CTVB predicts breast-feeding rates and links them with social circumstances. CTVB could be used as the basis for accurate resource allocation for community paediatric services: UK breast-feeding rates are low and merit targeted promotion.
NASA Astrophysics Data System (ADS)
Chung, N.; Suberkopp, K.
2005-05-01
The effect of shredder feeding on aquatic hyphomycete communities associated with submerged leaves was studied in two southern Appalachian headwater streams in North Carolina. Coarse and fine mesh litter bags containing red maple (Acer rubrum) leaves were placed in the nutrient-enriched stream and in the reference stream and were retrieved monthly. Both shredder feeding and nutrient enrichment enhanced breakdown rates. The breakdown rates of leaves in coarse mesh bags in the reference stream (k = 0.0275) and fine mesh bags in the nutrient enriched stream (k = 0.0272) were not significantly different, suggesting that the shredding effect on litter breakdown was offset by higher fungal activity as a result of nutrient enrichment. Fungal sporulation rates and biomass (based on ergosterol concentrations) were higher in the nutrient enriched than in the reference stream, but neither fungal biomass nor sporulation rate was affected by shredder feeding. Species richness was higher in the nutrient-enriched than in the reference stream. The enrichment with nutrients altered fungal community composition more than shredder feeding.
Dual wire weld feed proportioner
NASA Technical Reports Server (NTRS)
Nugent, R. E.
1968-01-01
Dual feed mechanism enables proportioning of two different weld feed wires during automated TIG welding to produce a weld alloy deposit of the desired composition. The wires are fed into the weld simultaneously. The relative feed rates of the wires and the wire diameters determine the weld deposit composition.
Rate Constants and Mechanisms of Protein–Ligand Binding
Pang, Xiaodong; Zhou, Huan-Xiang
2017-01-01
Whereas protein–ligand binding affinities have long-established prominence, binding rate constants and binding mechanisms have gained increasing attention in recent years. Both new computational methods and new experimental techniques have been developed to characterize the latter properties. It is now realized that binding mechanisms, like binding rate constants, can and should be quantitatively determined. In this review, we summarize studies and synthesize ideas on several topics in the hope of providing a coherent picture of and physical insight into binding kinetics. The topics include microscopic formulation of the kinetic problem and its reduction to simple rate equations; computation of binding rate constants; quantitative determination of binding mechanisms; and elucidation of physical factors that control binding rate constants and mechanisms. PMID:28375732
Symon, Andrew G; Whitford, Heather; Dalzell, Janet
2013-07-01
breast-feeding initiation rates have improved in Scotland, but exclusive and partial breast-feeding rates fall rapidly for several reasons. We aimed to examine whether antenatal feeding intention was associated with satisfaction with infant feeding method; and to explore the similarities and differences in infant feeding experience of women with different antenatal feeding intention scores. antenatal questionnaire assessment of infant feeding intentions, based on the theory of planned behaviour; two-weekly postnatal follow-up of infant feeding practice by text messaging; final telephone interview to determine reasons for and satisfaction with infant feeding practice. 355 women in eastern Scotland were recruited antenatally; 292 completed postnatal follow up. Antenatal feeding intentions broadly predicted postnatal practice. The highest satisfaction scores were seen in mothers with no breast-feeding intention who formula fed from birth, and those with high breast-feeding intention who breastfed for more than 8 weeks. The lowest satisfaction scores were seen in those with high intention scores who only managed to breast feed for less than 3 weeks. This suggests that satisfaction with infant feeding is associated with achieving feeding goals, whether artificial milk or breast feeding. Reasons for stopping breast feeding were broadly similar over time (too demanding, pain, latching, perception of amount of milk, lack of professional support, sibling jealousy). Perseverance appeared to mark out those women who managed to breast feed for longer; this was seen across the socio-economic spectrum. Societal and professional pressure to breast feed was commonly experienced. satisfaction with actual infant feeding practice is associated with antenatal intention; levels are higher for those meeting their goals, whether formula feeding from birth or breast feeding for longer periods. Perceived pressure to breast feed raises questions about informed decision making. Identifying those who will benefit most from targeted infant feeding support is crucial. Copyright © 2012 Elsevier Ltd. All rights reserved.
Quantitative effects of cyanogenesis on an adapted herbivore.
Ballhorn, D J; Heil, M; Pietrowski, A; Lieberei, R
2007-12-01
Plant cyanogenesis means the release of gaseous hydrogen cyanide (HCN) in response to cell damage and is considered as an effective defense against generalist herbivores. In contrast, specialists are generally believed not to be affected negatively by this trait. However, quantitative data on long-term effects of cyanogenesis on specialists are rare. In this study, we used lima bean accessions (Fabaceae: Phaseolus lunatus L.) with high quantitative variability of cyanogenic features comprising cyanogenic potential (HCNp; concentration of cyanogenic precursors) and cyanogenic capacities (HCNc; release of gaseous HCN per unit time). In feeding trials, we analyzed performance of herbivorous Mexican bean beetle (Coleoptera: Coccinellidae: Epilachna varivestis Mulsant) on selected lines characterized by high (HC-plants) and low HCNp (LC-plants). Larval and adult stages of this herbivore feed on a narrow range of legumes and prefer cyanogenic lima bean as host plant. Nevertheless, we found that performance of beetles (larval weight gain per time and body mass of adult beetles) was significantly affected by lima bean HCNp: Body weight decreased and developmental period of larvae and pupae increased on HC-plants during the first generation of beetles and then remained constant for four consecutive generations. In addition, we found continuously decreasing numbers of eggs and larval hatching as inter-generational effects on HC-plants. In contrast to HC-plants, constantly high performance was observed among four generations on LC-plants. Our results demonstrate that Mexican bean beetle, although preferentially feeding on lima bean, is quantitatively affected by the HCNp of its host plant. Effects can only be detected when considering more than one generation. Thus, cyanide-containing precursors can have negative effects even on herbivores adapted to feed on cyanogenic plants.
40 CFR 60.204 - Test methods and procedures.
Code of Federal Regulations, 2011 CFR
2011-07-01
... using the following equation: P=Mp Rp where: Mp=total mass flow rate of phosphorus-bearing feed, Mg/hr... to determine the mass flow rate (Mp) of the phosphorus-bearing feed. (ii) The Association of Official...
40 CFR 60.204 - Test methods and procedures.
Code of Federal Regulations, 2010 CFR
2010-07-01
... using the following equation: P=Mp Rp where: Mp=total mass flow rate of phosphorus-bearing feed, Mg/hr... to determine the mass flow rate (Mp) of the phosphorus-bearing feed. (ii) The Association of Official...
Powder Flux Regulation in the Laser Material Deposition Process
NASA Astrophysics Data System (ADS)
Arrizubieta, Jon Iñaki; Wegener, Maximiliam; Arntz, Kristian; Lamikiz, Aitzol; Ruiz, Jose Exequiel
In the present research work a powder flux regulation system has been designed, developed and validated with the aim of improving the Laser Material Deposition (LMD) process. In this process, the amount of deposited material per substrate surface unit area depends on the real feed rate of the nozzle. Therefore, a regulation system based on a solenoid valve has been installed at the nozzle entrance in order to control the powder flux. The powder flux control has been performed based on the machine real feed rate, which is compared with the programmed feed rate. An instantaneous velocity error is calculated and the powder flow is controlled as a function of this variation using Pulse Width Modulation (PWM) signals. Thereby, in zones where the Laser Material Deposition machine reduces the feed rate due to a trajectory change, powder accumulation can be avoided and the generated clads would present a homogeneous shape.
NASA Technical Reports Server (NTRS)
DeMore, W.; Wilson, E., Jr.
1998-01-01
Relative rate experiments were used to measure the rate constant and temperature dependence of the reaction of OH radicals with 2-fluoropropane (HFC-281ea), using ethane, propane, ethyl chloride as reference standards.
Content of beta-casomorphins in milk of women with a history of allergy.
Sidor, Katarzyna; Jarmołowska, Beata; Kaczmarski, Maciej; Kostyra, Elzbieta; Iwan, Matgorzata; Kostyra, Henryk
2008-11-01
The prevalence of food allergies increased over the past decade. Most symptoms of food allergy appear during the first 2 yr of life. The aim of this study was to determine the beta-casomorphin-5 and -7 (BCMs) in colostrum and milk of 12 breast-feeding women with a history and clinical manifestation of food allergy. The results were compared with the data obtained from a control group of healthy age-matched breast-feeding women. The level of BCM in women with food allergy was constant during lactation, whereas the highest level of opioid peptides was found in colostrums of healthy women with a subsequent rapid decrease in mature milk. These differences in BCMs profile between allergic and healthy breast-feeding women suggest that BCM content in the human milk may be an indicator of allergic conditions.
Arambalza, U; Ibarrola, I; Navarro, E; Urrutia, M B
2014-02-01
We analyzed the capacity of the common cockle Cerastoderma edule to utilize detrital food particles obtained from three different macrophytes: the vascular plant Juncus maritimus and two green macroalgae (Ulva lactuca and Enteromorpha sp.). We measured feeding and digestive parameters at three concentrations of detritus (0.5, 1.0 and 3.0 mm(3) l(-1)), so that functional relationships between ingestive and digestive processes could be assessed. Increasing concentrations of detritus (food) resulted in a reduction in filtering activity (clearance rate l h(-1)), but an increase in ingestion rate. Consequently, gut content also increased with increasing food concentration, irrespective of food type. In contrast, the trend followed by absorption efficiency with increasing ingestion rate was determined by food type, being significantly reduced (from 0.63 to 0.11) with Juncus but remaining almost constant with the green macroalgae (0.58 ± 0.07 with Ulva) or only minimally reduced (from 0.66 to 0.48 with Enteromorpha). This differential response had clear consequences for energy uptake: absorption rate increased with increasing particulate organic matter with Enteromorpha but decreased with Juncus. We discuss the possible role of digestive parameters such as digestibility, gut content and gut-residence time in the differential utilization of detrital matter from different vegetal origins by cockles.
Effects of restricted feeding schedules on circadian organization in squirrel monkeys
NASA Technical Reports Server (NTRS)
Boulos, Z.; Frim, D. M.; Dewey, L. K.; Moore-Ede, M. C.
1989-01-01
Free running circadian rhythms of motor activity, food-motivated lever-pressing, and either drinking (N = 7) or body temperature (N = 3) were recorded from 10 squirrel monkeys maintained in constant illumination with unlimited access to food. Food availability was then restricted to a single unsignaled 3-hour interval each day. The feeding schedule failed to entrain the activity rhythms of 8 monkeys, which continued to free-run. Drinking was almost completely synchronized by the schedule, while body temperature showed a feeding-induced rise superimposed on a free-running rhythm. Nonreinforced lever-pressing showed both a free-running component and a 24-hour component that anticipated the time of feeding. At the termination of the schedule, all recorded variables showed free-running rhythms, but in 3 animals the initial phase of the postschedule rhythms was advanced by several hours, suggesting relative coordination. Of the remaining 2 animals, one exhibited stable entrainment of all 3 recorded rhythms, while the other appeared to entrain temporarily to the feeding schedule. These results indicate that restricted feeding schedules are only a weak zeitgeber for the circadian pacemaker generating free-running rhythms in the squirrel monkey. Such schedules, however, may entrain a separate circadian system responsible for the timing of food-anticipatory changes in behavior and physiology.
Breast-feeding initiation and exclusive breast-feeding in rural Vietnam.
Duong, Dat V; Binns, Colin W; Lee, Andy H
2004-09-01
To investigate the initiation of breast-feeding and exclusive breast-feeding within the first week after delivery for women in rural Vietnam. An interviewer-administered survey was conducted on a sample of rural women who gave birth during August-October 2002. Quang Xuong District, Thanh Hoa Province of Vietnam. Four hundred and sixty-three women participated in the study, of whom 181 delivered at the district hospital (39.1%), 229 at a commune health centre (49.5%) and 53 at home attended by a traditional birth attendant (11.4%). Although the initiation and exclusive breast-feeding rates were relatively high at 98.3% and 83.6% respectively, the premature introduction of complementary food was a great concern. Logistic regression analysis showed that, together with socio-cultural determinants such as feeding preferences of the husband and maternal grandmother, feeding practices of friends, factors relating to delivery methods, delivery locations and health problems could influence the initiation rate and breast-feeding patterns. To promote breast-feeding practices of rural mothers, health education on breast-feeding should take into account local socio-cultural features in addition to improving the counselling skills of health workers.
NASA Astrophysics Data System (ADS)
Fang, Ziheng; Tian, Xiangli; Dong, Shuanglin
2017-06-01
Starving and re-feeding trials were conducted to evaluate the effects of starvation duration and recovery times on the growth performance and physiological characteristics of juvenile tongue sole Cynoglossus semilaevis, which included growth, body composition, intestinal morphology and digestive enzymes activities. The fish starved for one (D1), two (D2) and four (D4) days, respectively, were recovered for three (R3, R6, R12), seven (R7, R14, R28) and eleven (R11, R22, R44) folds of starvation days while the control fish were fed constantly. The experiment was conducted for 96 days. The fish individuals in D1R11, D2R14 and D2R22 caught up in weight with the control, indicating that complete compensatory growth existed in these fish individuals. The highest body weight gain and total specific growth rates were observed in D2R22. Food intake increased significantly in most treatments in comparison with that of the control except for D1R7 and D2R22 ( P < 0.05). Food conversion efficiency and apparent digest coefficient in D2R22 were significantly promoted, being higher than that of the control ( P < 0.05). The activities of trypsin and lipase were found to be closely related to the growth performance. The activities of liver and hindgut trypsin, also midgut and hindgut lipase in D2R22 were significantly higher than those of the control ( P < 0.05). The fold height (HF) of foregut and midgut increased significantly in D2R22, and HF decreased significantly in D1R3, D2R6 and D4R12 ( P < 0.05). On our findings, we may conclude that the optimum starving and re-feeding strategy is starving for 2 days and re-feeding for 22 days. And in this starving and re-feeding strategy, the compensatory growth could be mostly attributed to the promotion of food conversion efficiency and digestibility coefficiency.
NASA Astrophysics Data System (ADS)
Rachmawati, Diana; Samidjan, Istiyanto; Elfitasari, Tita
2018-02-01
The purpose of this study was to determine the effect of adding the phytase enzyme in the artificial feed on digestibility of feed, feed conversion ratio and growth of gift tilapia saline fish (Oreochromis niloticus) nursery stadia I. The fish samples in this study used gift tilapia saline fish (O. niloticus) with an average weight of 0,62 ± 0,008 g/fish and the stocking density of 1 fish1 L. Experimental method used in this study was completely randomized design with 4 treatments and 3 repetitions. The treatments were by adding phytase enzyme in artificial feed with the different level of doses those were A (0 FTU kg1 feed), B (500 FTU kg1 feed), C (1000 FTU kg1 feed) and D (1500 FTU kg1 feed). The results show that the addition of phytase enzyme was significantly (P<0.01) affected on apparent digestibility coefficient of protein (ADCP), apparent digestibility coefficient of Phospor (ADCF), feed conversion ratio (FCR), protein efficiency ratio (PER), and relative growth rate (RGR), on the other hand it insignificantly (P>0.05) affected on Survival Rate (SR) of gift tilapia saline fish. The optimum doses of phytase enzyme on RGR, FCR, PER, ADCP and ADCF of gift tilapia saline fish ranged from 1060 to 1100 FTU kg-1 feed.
Hennig, Kristin; Verkerk, Ruud; Bonnema, Guusje; Dekker, Matthijs
2012-08-15
Kinetic modeling was used as a tool to quantitatively estimate glucosinolate thermal degradation rate constants. Literature shows that thermal degradation rates differ in different vegetables. Well-characterized plant material, leaves of broccoli and Chinese kale plants grown in two seasons, was used in the study. It was shown that a first-order reaction is appropriate to model glucosinolate degradation independent from the season. No difference in degradation rate constants of structurally identical glucosinolates was found between broccoli and Chinese kale leaves when grown in the same season. However, glucosinolate degradation rate constants were highly affected by the season (20-80% increase in spring compared to autumn). These results suggest that differences in glucosinolate degradation rate constants can be due to variation in environmental as well as genetic factors. Furthermore, a methodology to estimate rate constants rapidly is provided to enable the analysis of high sample numbers for future studies.
Predictors of breast-feeding in a developing country: results of a prospective cohort study.
Al-Sahab, Ban; Tamim, Hala; Mumtaz, Ghina; Khawaja, Marwan; Khogali, Mustafa; Afifi, Rima; Nassif, Yolla; Yunis, Khalid A
2008-12-01
Data on the prevalence and predictors of breast-feeding remain scarce in Lebanon. Moreover, no study has previously addressed the effect of the paediatrician's sex on breast-feeding. The present study aimed to assess the prevalence and predictors of breast-feeding at 1 and 4 months of infant age while exploring the potential role of the sex of the paediatrician. Prospective cohort study. Predictors of breast-feeding significant at the bivariate level were tested at 1 and 4 months through two stepwise regression models. Infants were enrolled through the clinics and dispensaries of 117 paediatricians located in Beirut, Lebanon, and its suburbs. A total of 1,320 healthy newborn infants born between August 2001 and February 2002 were prospectively followed during the first year. Breast-feeding rates at 1 and 4 months were 56.3 % and 24.7 %, respectively. Early discharge, high parity and religion were significantly associated with higher breast-feeding rates at 1 and 4 months of age. Maternal age proved significant only at 1 month, while maternal working status and sex of the paediatrician were significant at 4 months. A novel finding of our study was the positive effect of female paediatricians on breast-feeding continuation until 4 months of age (OR = 1.49; 95 % CI 1.03, 2.15). Breast-feeding rates are low at 1 and 4 months of infant age in Beirut. Further research to investigate the interactions between female physicians and lactating mothers in maintaining breast-feeding in other populations is warranted. The results constitute the basis for designing interventions targeting policy makers, health professionals and mothers.
NASA Astrophysics Data System (ADS)
German, Ernst D.; Sheintuch, Moshe
2017-02-01
Microkinetic models of methane steam reforming (MSR) over bare platinum and rhodium (111) surfaces are analyzed in present work using calculated rate constants. The individual rate constants are classified into three different sets: (i) rate constants of adsorption and desorption steps of CH4, H2O, CO and of H2; (ii) rate constants of dissociation and formation of A-H bonds (A = C, O, and H), and (iii) rate constants of dissociation and formation of C-O bond. The rate constants of sets (i) and (iii) are calculated using transition state theory and published thermochemical data. The rate constants of H-dissociation reactions (set (ii)) are calculated in terms of a previously-developed approach that accounts for thermal metal lattice vibrations and for H tunneling through a potential barrier of height which depends on distance of AH from a surface. Pre-exponential factors of several group (ii) steps were calculated to be usually lower than the traditional kBT/h due to tunneling effect. Surface composition and overall MSR rates over platinum and rhodium surfaces are compared with those over nickel surface showing that operating conditions strongly affect on the activity order of the catalysts.
Carly, F; Niu, H; Delvigne, F; Fickers, P
2016-04-01
High Pichia pastoris biomass density could be obtained using high co-feeding rate of methanol and sorbitol in a fed-batch or continuous culture, while further higher feeding rate finally leads to oxygen limitation in bioreactor. In the literature, there is lack of report about AOX1 promoter regulation with regard to dissolved oxygen level (DO). Therefore, in this work, chemostat cultures were performed to investigate the cell growth, metabolism and regulation of the AOX1 promoter (pAOX1) regarding co-feeding rate of optimized methanol/sorbitol mixture (methanol fraction 0.60 C-mol/C-mol) using a P. pastoris Mut+/pAOX1-lacZ strain. The oxygen transfer rates (OTR) in bioreactor were kept in the range of typical values of large bioreactor, i.e., 4-8 g/(L h) if DO equals 30 % saturation or 5-10 g/(L h) if DO nears zero. For DO >0, an increase of the carbon fed led to an increase of pAOX1 induction. By contrast, when dissolved oxygen was completely depleted, methanol accumulated, causing a 30 % decrease of pAOX1 induction. However, this decrease is more likely to be lined to methanol accumulation than to low level of dissolved oxygen (<4 % DO). Methanol/sorbitol co-feeding allowed cells to adapt to oxygen transient limitations that often occur at industrial scale with reduced effect on pAOX1 induction. The optimal feeding rate tested here was 6.6 mmol C (DCW h)(-1) at an OTR of 8.28 g O2(L h)(-1) with over fivefold pAOX1 induction (probably directly associated with target protein productivity) compared with previous work.
Characteristics of lipids and their feeding value in swine diets
USDA-ARS?s Scientific Manuscript database
In livestock diets, energy is one of the most expensive nutritional components of feed formulation. Because lipids are a concentrated energy source, inclusion of lipids are known to affect growth rate and feed efficiency, but are also known to affect diet palatability, feed dustiness, and pellet qua...
NASA Astrophysics Data System (ADS)
Tang, Baojun; Riisgård, Hans Ulrik
2018-03-01
The large water-pumping and particle-capturing gills of the filter-feeding blue mussel Mytilus edulis are oversized for respiratory purposes. Consequently, the oxygen uptake rate of the mussel has been suggested to be rather insensitive to decreasing oxygen concentrations in the ambient water, since the diffusion rate of oxygen from water flowing through the mussel determines oxygen uptake. We tested this hypothesis by measuring the oxygen uptake in mussels exposed to various oxygen concentrations. These concentrations were established via N2-bubbling of the water in a respiration chamber with mussels fed algal cells to stimulate fully opening of the valves. It was found that mussels exposed to oxygen concentrations decreasing from 9 to 2 mg O2/L resulted in a slow but significant reduction in the respiration rate, while the filtration rate remained high and constant. Thus, a decrease of oxygen concentration by 78% only resulted in a 25% decrease in respiration rate. However, at oxygen concentrations below 2 mg O2/L M. edulis responded by gradually closing its valves, resulting in a rapid decrease of filtration rate, concurrent with a rapid reduction of respiration rate. These observations indicated that M. edulis is no longer able to maintain its normal aerobic metabolism at oxygen concentration below 2 mg O2/L, and there seems to be an energy-saving mechanism in bivalve molluscs to strongly reduce their activity when exposed to low oxygen conditions.
Kröger, Leif C; Kopp, Wassja A; Leonhard, Kai
2017-04-06
Microgels have a wide range of possible applications and are therefore studied with increasing interest. Nonetheless, the microgel synthesis process and some of the resulting properties of the microgels, such as the cross-linker distribution within the microgels, are not yet fully understood. An in-depth understanding of the synthesis process is crucial for designing tailored microgels with desired properties. In this work, rate constants and reaction enthalpies of chain propagation reactions in aqueous N-isopropylacrylamide/N,N'-methylenebisacrylamide and aqueous N-vinylcaprolactam/N,N'-methylenebisacrylamide systems are calculated to identify the possible sources of an inhomogeneous cross-linker distribution in the resulting microgels. Gas-phase reaction rate constants are calculated from B2PLYPD3/aug-cc-pVTZ energies and B3LYPD3/tzvp geometries and frequencies. Then, solvation effects based on COSMO-RS are incorporated into the rate constants to obtain the desired liquid-phase reaction rate constants. The rate constants agree with experiments within a factor of 2-10, and the reaction enthalpies deviate less than 5 kJ/mol. Further, the effect of rate constants on the microgel growth process is analyzed, and it is shown that differences in the magnitude of the reaction rate constants are a source of an inhomogeneous cross-linker distribution within the resulting microgel.
Model-based estimation of adiabatic flame temperature during coal gasification
NASA Astrophysics Data System (ADS)
Sarigul, Ihsan Mert
Coal gasification temperature distribution in the gasifier is one of the important issues. High temperature may increase the risk of corrosion of the gasifier wall or it may cause an increase in the amount of volatile compounds. At the same time, gasification temperature is a dominant factor for high conversion of products and completing the reactions during coal gasification in a short time. In the light of this information it can be said that temperature is one of key parameters of coal gasification to enhance the production of high heating value syngas and maximize refractory longevity. This study aims to predict the adiabatic flame temperatures of Australian bituminous coal and Indonesian roto coal in an entrained flow gasifier using different operating conditions with the ChemCAD simulation and design program. To achieve these objectives, two types of gasification parameters were carried out using simulation of a vertical entrained flow reactor: oxygen-to-coal feed ratio by kg/kg and pressure and steam-to-coal feed ratio by kg/kg and pressure. In the first part of study the adiabatic flame temperatures, coal gasification products and other coal characteristics of two types of coals were determined using ChemCAD software. During all simulations, coal feed rate, coal particle size, initial temperature of coal, water and oxygen were kept constant. The relationships between flame temperature, coal gasification products and operating parameters were fundamentally investigated. The second part of this study addresses the modeling of the flame temperature relation to methane production and other input parameters used previous chapter. The scope of this work was to establish a reasonable model in order to estimate flame temperature without any theoretical calculation. Finally, sensitivity analysis was performed after getting some basic correlations between temperature and input variables. According to the results, oxygen-to-coal feed ratio has the most influential effect on adiabatic flame temperature.
Sugar Consumption and Changes in Dental Caries from Childhood to Adolescence.
Peres, M A; Sheiham, A; Liu, P; Demarco, F F; Silva, A E R; Assunção, M C; Menezes, A M; Barros, F C; Peres, K G
2016-04-01
There are no prospective studies investigating the effects of sugar-related feeding practices on changes in dental caries from early childhood to young adulthood. The aim of this study was to assess whether sugar-related feeding practices affect dental caries between the ages of 6 and 18 y. This birth cohort study was initiated in 1993 in Pelotas, Brazil. There were 3 dental clinical assessments; at ages 6 y (n = 359), 12 y (n = 339), and 18 y (n = 307). Sugar-related feeding practices were assessed at ages 4, 15, and 18 y. Covariates included sex and life course variables, such as family income, breast-feeding, mother's education, regularity of dental visit, and child's toothbrushing habits. Group-based trajectory analysis was performed to characterize trajectories of time-varying independent variables that had at least 3 time points. We fitted a generalized linear mixed model assuming negative binomial distribution with log link function on 3-time repeated dental caries assessments. One in 5 participants was classified as "high" sugar consumers, and nearly 40% were "upward consumers." "Low consumers" accounted for >40% of the sample. High and upward sugar consumers had higher dental caries prevalence and mean DMFT in all cohort waves when compared with low sugar consumers. Caries occurred at a relatively constant rate over the period of study, but in all sugar consumption groups, the increment of dental caries was slightly higher between ages 6 and 12 y than between 12 and 18 y. Adjusted analysis showed that dental caries increment ratio between ages 6 and 18 y was 20% and 66% higher in upward and high sugar consumer groups as compared with low consumers. The higher the sugar consumption along the life course, the higher the dental caries increment. Even the low level of sugar consumption was related to dental caries, despite the use of fluoride. © International & American Associations for Dental Research 2016.
Zheng, C-T; Jørgensen, H; Høy, C-E; Jakobsen, K
2006-04-01
Specific structured triacylglycerides (STG) containing medium chain fatty acids in sn-1,3 positions and a long chain fatty acid in sn-2 position were prepared from rapeseed oil and capric acid (C10:0). A total of 80 female broiler chickens (Ross 208) were randomly allocated into five dietary treatments as two series of 40 chicks: a basal diet with graded levels of STG of 0, 20, 40, 60 and 80 g/kg diet at the expense of rapeseed oil were fed to the chickens in groups of four. At 12 d of age the chickens were placed pair-wise in metabolism cages. The grower period (d 13-36) was divided into four consecutive balance periods each of 6 d. Two 24 h measurements of gas exchange in two open-air circuit respiration chambers were performed during the second and third day of each balance period. During the whole experiment there was a negative effect of the inclusion of STG on average feed intake. However, this only slightly affected average daily weight gain. Feed conversion efficiency improved linearly with the inclusion level of STG. Daily gain adjusted to mean daily feed intake increased linearly with inclusion rate of STG, indicating that the weight gain was affected by both feed intake and the enhancing effect on digestibility of STG. Weight of small intestine and colon decreased with increasing inclusion of STG. Utilisation of dietary protein relative to intake increased while that of retained fat tended to decrease resulting in a decreased utilisation of metabolisable energy (RE/ME) in birds receiving STG. Heat production (HE) was slightly lower in the STG groups. More of the dietary fat was oxidised when more STG was added, although the total amount of fat in the diets was kept constant.
Feeding, evaluating, and controlling rumen function.
Lean, Ian J; Golder, Helen M; Hall, Mary Beth
2014-11-01
Achieving optimal rumen function requires an understanding of feeds and systems of nutritional evaluation. Key influences on optimal function include achieving good dry matter intake. The function of feeds in the rumen depends on other factors including chemical composition, rate of passage, degradation rate of the feed, availability of other substrates and cofactors, and individual animal variation. This article discusses carbohydrate, protein, and fat metabolism in the rumen, and provides practical means of evaluation of rations in the field. Conditions under which rumen function is suboptimal (ie, acidosis and bloat) are discussed, and methods for control examined. Copyright © 2014 Elsevier Inc. All rights reserved.
Breeding objectives for Targhee sheep.
Borg, R C; Notter, D R; Kuehn, L A; Kott, R W
2007-11-01
Breeding objectives were developed for Targhee sheep under rangeland production conditions. Traits considered were those for which EPD were available from the US National Sheep Improvement Program and included direct and maternal effects on 120-d weaning weight (WW and MM, respectively); yearling weight (YW); yearling fleece weight, fiber diameter, and staple length; and percent lamb crop (PLC), measured as the number of lambs born per 100 ewes lambing. A bioeconomic model was used to predict the effects of a change of 1 additive SD in EPD for each trait, holding all other traits constant at their mean, on animal performance, feed requirements, feed costs, and economic returns. Resulting economic weightings were then used to derive selection indexes. Indexes were derived separately for 3 prolificacy levels (1.41, 1.55, and 1.70 lambs/ewe lambing), 2 triplet survival levels (50 and 67%), 2 lamb pricing policies (with or without discounting of prices for heavy feeder lambs), and 3 forage cost scenarios (renting pasture, purchasing hay, or reducing flock size to accommodate increased nutrient requirements for production). Increasing PLC generally had the largest impact on profitability, although an increase in WW was equally important, with low feed costs and no discounting of prices for heavy feeder lambs. Increases in PLC were recommended at all 3 prolificacy levels, but with low triplet survival the value of increasing PLC eventually declined as the mean litter size increased to approximately 2.15 lambs/ewe lambing and above. Increasing YW (independent of WW) increased ewe maintenance costs and reduced profitability. Predicted changes in breeding values for WW and YW under index selection varied with lamb pricing policy and feed costs. With low feed costs or no discounts for heavy lambs, YW increased at a modest rate in association with increasing WW, but with high feed costs or discounting of heavy lambs, genetic trends in WW were reduced by approximately 50% to constrain increases in YW. Changes in EPD for MM or fleece traits generally had smaller effects on profitability than changes in PLC, WW, and YW. Two indexes designed to address current rangeland production conditions (low forage costs and discounting of heavy feeder lambs) or more intensive and integrated production with retained ownership and value-based marketing of lambs (higher forage costs and no discounting of heavy lambs) were anticipated to meet the needs of most Targhee producers.
Code of Federal Regulations, 2013 CFR
2013-04-01
... Echerichia coli and bacterial pneumonia caused by Pasteurella multocida organisms susceptible to... improved feed efficiency and increased rate of weight gain; and for control of bacterial pneumonia... pneumonia caused by P. multocida organisms susceptible to chlortetracycline. Feed continuously at a rate of...
Code of Federal Regulations, 2014 CFR
2014-04-01
... Echerichia coli and bacterial pneumonia caused by Pasteurella multocida organisms susceptible to... improved feed efficiency and increased rate of weight gain; and for control of bacterial pneumonia... pneumonia caused by P. multocida organisms susceptible to chlortetracycline. Feed continuously at a rate of...
Code of Federal Regulations, 2012 CFR
2012-04-01
... Echerichia coli and bacterial pneumonia caused by Pasteurella multocida organisms susceptible to... improved feed efficiency and increased rate of weight gain; and for control of bacterial pneumonia... pneumonia caused by P. multocida organisms susceptible to chlortetracycline. Feed continuously at a rate of...
40 CFR 60.234 - Test methods and procedures.
Code of Federal Regulations, 2010 CFR
2010-07-01
... equation: P = Mp Rp where: Mp total mass flow rate of phosphorus-bearing feed, Mg/hr (ton/hr). Rp=P2O5... mass flow rate (Mp) of the phosphorus-bearing feed. (ii) The Association of Official Analytical...
40 CFR 60.234 - Test methods and procedures.
Code of Federal Regulations, 2011 CFR
2011-07-01
... equation: P = Mp Rp where: Mp total mass flow rate of phosphorus-bearing feed, Mg/hr (ton/hr). Rp=P2O5... mass flow rate (Mp) of the phosphorus-bearing feed. (ii) The Association of Official Analytical...
Leow, Timothy Yong Qun; Ung, Andrew; Qian, Shelley; Nguyen, Jessie Thanh; An, Yvonne; Mudgil, Poonam; Whitehall, John
2017-06-13
Infant feeding practices are known to influence the child's long-term health. Studies have associated obesity and other diseases with reduced breastfeeding and early introduction of high calorie beverages (HCBs). The rising prevalence of obesity is already a problem in most developed countries, especially Australia, but cultural differences are influential. Our aim is to examine and compare infant feeding practices and educational levels of respondents through questionnaires in three culturally different sites: Campbelltown (South Western Sydney), Australia, Singapore and Ho Chi Minh City, Vietnam (HCMC). Consenting parents and carers (aged ≥18 years old) of at least one child (≤6 years old) were recruited from paediatric clinics in Campbelltown, Singapore and HCMC. Participants completed an infant feeding practices questionnaire regarding breastfeeding, beverage and solid initiation in addition to the parent's ethnicity, age, and educational level. Data was analysed quantitatively using SPSS. Two hundred eighty-three participants were recruited across the three sites, HCMC (n = 84), Campbelltown (n = 108), and Singapore (n = 91). 237 (82.6%) children were breastfed but in all only 100 (60.2%) were exclusively breastfed for five months or more. There was a statistical difference in rates of breast feeding between each region. HCMC (n = 18, 21.4%) had the lowest, followed by Campbelltown (n = 35, 32.4%), and then Singapore (n = 47, 51.7%). There was also a difference in rates of introduction of HCBs by 3 years of age, with those in HCMC (n = 71, 84.5%) were higher than Campbelltown (n = 71, 65.8%) and Singapore (n = 48, 52.8%). The educational level of respondents was lower in Vietnam where only 46.4% (n = 39) had completed post-secondary education, compared to 75.0% (n = 81) in Campbelltown and 75.8% (n = 69) in Singapore. Rates of breast feeding were inversely correlated with rates of introduction of HCB and positively related to educational achievement. Vietnam had lowest rates of breast feeding, higher rates of introduction of HCBs, and lower rates of education. Given rising rates of obesity, there is a need for more effective programmes to promote breast feeding and restrict false advertising of HCBs.
Holzman, Roi; China, Victor; Yaniv, Sarit; Zilka, Miri
2015-07-01
Larval fishes suffer prodigious mortality rates, eliminating 99% of the cohort within a few days after their first feeding. Hjort (1914) famously attributed this "critical period" of low survival to larval inability to obtain sufficient food. We discuss recent experimental and modeling work, suggesting that the viscous hydrodynamic regime have marked effects on the mechanism of suction feeding in larval fish. As larvae grow, the size of the gape and associated volume of the mouth increase. At the same time, larvae swim faster and can generate faster suction flows, thus transiting to a hydrodynamic regime of higher Reynolds numbers. This hydrodynamic regime further leads to changes in the spatio-temporal patterns of flow in front of the mouth, and an increasing ability in larger larvae to exert suction forces on the prey. Simultaneously, the increase in swimming speed and the distance from which the prey is attacked result in higher rates of encountering prey by larger (older) larvae. In contrast, during the first few days after feeding commence the lower rates of encounter and success in feeding translate to low feeding rates. We conclude that young larvae experience "hydrodynamic starvation," in which low Reynolds numbers mechanically limit their feeding performance even under high densities of prey. © The Author 2015. Published by Oxford University Press on behalf of the Society for Integrative and Comparative Biology. All rights reserved. For permissions please email: journals.permissions@oup.com.
Does frenotomy improve breast-feeding difficulties in infants with ankyloglossia?
Ito, Yasuo
2014-08-01
The aim of this systematic review was to critically examine the existing literature regarding the effectiveness of tongue-tie division in infants with ankyloglossia, using the new grades of recommendations, assessment, development, and evaluation (GRADE) rating system. A clinical question was structured according to patient, intervention, comparison, and outcome, as follows: in infants with poor breast-feeding and ankyloglossia (patient), does frenotomy (intervention), compared to lactation support alone (comparison), improve feeding (outcome)? An electronic literature search was systematically conducted from databases including PubMed, Japana Centra Revuo Medicina (Igaku Chuo Zasshi), CINAHL, and Cochrane Library using the key words "ankyloglossia," "tongue-tie," "frenotomy," and/or "breast-feeding" in English and equivalent terms in Japanese. The literature search yielded four randomized clinical trials, and 12 observational studies for analysis. The quality of the literature was rated in regard to the two most important outcomes (sucking/latching, and nipple pain) and five less important outcomes (milk supply/milk production, continuation of breast-feeding, weight gain, adverse events, and dyad distress) in accordance with the GRADE system. Evidence levels of the most important outcomes were rated either A (strong evidence) or B (moderate evidence), and less important outcomes were rated C (weak evidence); every outcome consistently showed a favorable effect of frenotomy on breast-feeding. The literature review supported an overall moderate quality of evidence for the effectiveness of frenotomy for the treatment of breast-feeding difficulties in infants with ankyloglossia. No major complications from frenotomy were reported. © 2014 Japan Pediatric Society.
Bache, Manon; Pizon, Emmanuelle; Jacobs, Julien; Vaillant, Michel; Lecomte, Aline
2014-03-01
To evaluate the effect of early oral stimulation before the introduction of oral feeding, over the duration of concomitant tube feeding ("transition period"), the length of hospital stay and the breastfeeding rates upon discharge in preterm infants. Preterm infants born between 26 and 33 weeks gestational age (n=86), were randomized into an intervention and control group. Infants in the intervention group received an oral stimulation program consisting in stimulation of the oral structures for 15 min at least for 10 days, before introduction of oral feeding. Oral feeding was introduced at 34 weeks GA in both groups. Breastfeeding rates upon discharge were significantly higher in the intervention than in the control group (70% versus 45.6%, p=0.02). There was no statistical difference between the two groups in terms of the length of the transition period or the length of the hospital stay. The need for prolonged CPAP support (HR=0.937, p=0.030) and small size for gestational age at birth (HR=0.338, p=0.016) were shown to be risk factors for a prolonged transition period. A pre-feeding oral stimulation program improves breastfeeding rates in preterm infants. The study results suggest that oral stimulation, as used in our specific population, does not shorten the transition period to full oral feeding neither the length of hospital stay. Copyright © 2014 Elsevier Ltd. All rights reserved.
Microcomputer-Based Programs for Pharmacokinetic Simulations.
ERIC Educational Resources Information Center
Li, Ronald C.; And Others
1995-01-01
Microcomputer software that simulates drug-concentration time profiles based on user-assigned pharmacokinetic parameters such as central volume of distribution, elimination rate constant, absorption rate constant, dosing regimens, and compartmental transfer rate constants is described. The software is recommended for use in undergraduate…
NASA Astrophysics Data System (ADS)
Pakieła, W.; Tański, T.; Brytan, Z.; Labisz, K.
2016-04-01
The goal of this paper was focused on investigation of microstructure and properties of surface layer produced during laser surface treatment of aluminium alloy by high-power fibre laser. The performed laser treatment involves remelting and feeding of Inconel 625 powder into the aluminium surface. As a base metal was used aluminium alloy AlMg5Si2Mn. The Inconel powder was injected into the melt pool and delivered by a vacuum feeder at a constant rate of 4.5 g/min. The size of Inconel alloying powder was in the range 60-130 µm. In order to remelt the aluminium alloy surface, the fibre laser of 3 kW laser beam power has been used. The linear laser scan rate of the beam was set 0.5 m/min. Based on performed investigations, it was possible to obtain the layer consisting of heat-affected zone, transition zone and remelted zone, without cracks and defects having much higher hardness value compared to the non-alloyed material.
Anchondo, Inés; Berkeley, Lizabeth; Mulla, Zuber D; Byrd, Theresa; Nuwayhid, Bahij; Handal, Gilbert; Akins, Ralitsa
2012-05-01
Investigate physicians' breast-feeding experiences and attitudes using a survey based on two behavioral theories: theory of reasoned action (TRA) and the health belief model (HBM). There were 73 participants included in the investigation. These participants were resident and faculty physicians from pediatrics, obstetrics/gynecology, and family medicine at a university campus, located on the US-Mexico border. The sample was reduced to 53 and 56 records for the attitude and confidence variables, respectively. Physicians answered a survey about their breast-feeding experiences and attitudes to learn about intention and ability applying constructs from TRA and HBM. An attitude scale, confidence variable (from self-efficacy items), and a lactation training index were created for the analysis. Analysis of the association between physicians' breastfeeding experiences and their attitudes revealed physicians are knowledgeable about breast-feeding and have positive attitudes towards breast-feeding. They did not seem to remember how long they breast-fed their children or whether they enjoyed breast-feeding, but they wanted to continue breast-feeding. Physicians cite work as a main reason for not continuing to breast-feed. Physicians' attitudes toward breast-feeding are positive. They are expected to practice health-promotion behavior including breast-feeding; however, physicians' breast-feeding rates are low and although they are knowledgeable about breast-feeding their training lacks on didactic depth and hands-on experience. If physicians learn more about breast-feeding and breast-feed exclusively and successfully, the rates in the United States would increase naturally.
Assessing Chemical Retention Process Controls in Ponds
NASA Astrophysics Data System (ADS)
Torgersen, T.; Branco, B.; John, B.
2002-05-01
Small ponds are a ubiquitous component of the landscape and have earned a reputation as effective chemical retention devices. The most common characterization of pond chemical retention is the retention coefficient, Ri= ([Ci]inflow-[Ci] outflow)/[Ci]inflow. However, this parameter varies widely in one pond with time and among ponds. We have re-evaluated literature reported (Borden et al., 1998) monthly average retention coefficients for two ponds in North Carolina. Employing a simple first order model that includes water residence time, the first order process responsible for species removal have been separated from the water residence time over which it acts. Assuming the rate constant for species removal is constant within the pond (arguable at least), the annual average rate constant for species removal is generated. Using the annual mean rate constant for species removal and monthly water residence times results in a significantly enhanced predictive capability for Davis Pond during most months of the year. Predictive ability remains poor in Davis Pond during winter/unstratified periods when internal loading of P and N results in low to negative chemical retention. Predictive ability for Piedmont Pond (which has numerous negative chemical retention periods) is improved but not to the same extent as Davis Pond. In Davis Pond, the rate constant for sediment removal (each month) is faster than the rate constant for water and explains the good predictability for sediment retention. However, the removal rate constant for P and N is slower than the removal rate constant for sediment (longer water column residence time for P,N than for sediment). Thus sedimentation is not an overall control on nutrient retention. Additionally, the removal rate constant for P is slower than for TOC (TOC is not the dominate removal process for P) and N is removed slower than P (different in pond controls). For Piedmont Pond, sediment removal rate constants are slower than the removal rate constant for water indicating significant sediment resuspension episodes. It appears that these sediment resuspension events are aperiodic and control the loading and the chemical retention capability of Piedmont Pond for N,P,TOC. These calculated rate constants reflect the differing internal loading processes for each component and suggest means and mechanisms for the use of ponds in water quality management.
In vitro rapid intraoral adjustment of porcelain prostheses using a high-speed dental handpiece.
Song, Xiao-Fei; Yin, Ling; Han, Yi-Gang; Wang, Hui
2008-03-01
In vitro rapid intraoral adjustment of porcelain prostheses was conducted using a high-speed dental handpiece and diamond bur. The adjustment process was characterized by measurement of removal forces and energy, with scanning electron microscopic (SEM) observation of porcelain debris, surfaces and subsurface damage produced as a function of operational feed rate. Finite element analysis (FEA) was applied to evaluate subsurface stress distributions and degrees of subsurface damage. The results show that an increase in feed rate resulted in increases in both tangential and normal forces (analysis of variance (ANOVA), P<0.01). When the feed rate approached the highest rate of 60mm min(-1) at a fixed depth of cut of 100microm, the tangential force was nearly seven times that at the lowest feed rate of 15mm min(-1). Consequently, the specific removal energy increased significantly (ANOVA, P<0.01), and the maximum depth of subsurface damage obtained was approximately 110 and 120microm at the highest feed rate of 60mm min(-1) using SEM and FEA, respectively. The topographies of both the adjusted porcelain surfaces and the debris demonstrate microscopically that porcelain was removed via brittle fracture and plastic deformation. Clinicians must be cautious when pursuing rapid dental adjustments, because high operational energy, larger forces and severe surface and subsurface damage can be induced.
Dynamic Characteristics of The DSI-Type Constant-Flow Valves
NASA Astrophysics Data System (ADS)
Kang, Yuan; Hu, Sheng-Yan; Chou, Hsien-Chin; Lee, Hsing-Han
Constant flow valves have been presented in industrial applications or academic studies, which compensate recess pressures of a hydrostatic bearing to resist load fluctuating. The flow rate of constant-flow valves can be constant in spite of the pressure changes in recesses, however the design parameters must be specified. This paper analyzes the dynamic responses of DSI-type constant-flow valves that is designed as double pistons on both ends of a spool with single feedback of working pressure and regulating restriction at inlet. In this study the static analysis presents the specific relationships among design parameters for constant flow rate and the dynamic analyses give the variations around the constant flow rate as the working pressure fluctuates.
Modeling and Tool Wear in Routing of CFRP
DOE Office of Scientific and Technical Information (OSTI.GOV)
Iliescu, D.; Fernandez, A.; Gutierrez-Orrantia, M. E.
2011-01-17
This paper presents the prediction and evaluation of feed force in routing of carbon composite material. In order to extend tool life and improve quality of the machined surface, a better understanding of uncoated and coated tool behaviors is required. This work describes (1) the optimization of the geometry of multiple teeth tools minimizing the tool wear and the feed force, (2) the optimization of tool coating and (3) the development of a phenomenological model between the feed force, the routing parameters and the tool wear. The experimental results indicate that the feed rate, the cutting speed and the toolmore » wear are the most significant factors affecting the feed force. In the case of multiple teeth tools, a particular geometry with 14 teeth right helix right cut and 11 teeth left helix right cut gives the best results. A thick AlTiN coating or a diamond coating can dramatically improve the tool life while minimizing the axial force, roughness and delamination. A wear model has then been developed based on an abrasive behavior of the tool. The model links the feed rate to the tool geometry parameters (tool diameter), to the process parameters (feed rate, cutting speed and depth of cut) and to the wear. The model presented has been verified by experimental tests.« less
Sarkar, Abdullah; Hashem, Alaa AbouBakr; Hamadah, Reem E; Alhoulan, Asma; AlMakadma, Yosra A; Khan, Tehreem A; Al-Hamdani, Abdurahman K; Senok, Abiola
2016-01-01
Background The Baby Friendly Hospital Initiative (BFHI) is a practice guideline for healthcare providers to promote breastfeeding and increase breastfeeding rates. Objective This study aimed to examine reported experiences and views on breastfeeding of women using prenatal and postnatal services, and opinions of staff, in the context of the BFHI programme in Riyadh, Saudi Arabia. Design Prospective cohort study. Setting This prospective, longitudinal study was conducted from December 2013 to September 2015 at two healthcare facilities (BFHI and non-BFHI) in Riyadh Saudi Arabia. Methods Women 36–40 weeks gestation receiving antenatal care at the hospitals were enrolled. Questionnaires were administered prenatally, at 1, 3 and 6 months postnatal and to the administrator and maternity staff. Results We recruited 277 women with an estimated 80% response rate. 156 (BFHI=78/139, non-BFHI=78/138, 56%) participants completed all questionnaires. Most BFHI-hospital participants (77.9%, n=8 for this question) acknowledged seeing the breast feeding policy compared to 23.5% (n=23) at the non-BFHI-hospital (p<0.01). Breast feeding education and encouragement was higher at the BFHI-hospital (93.3%) compared to the non-BFHI-hospital (48.2%; p<0.01). At postpartum discharge, 51% (n=53) of mothers in the BFHI-hospital were breast feeding exclusively versus 29.6% (n=29) at the non-BFHI-hospital. Where formula feed was introduced, women in the BFHI-hospital more often practiced mixed feeding rather than exclusive formula feeding with some switching from mixed feeding to exclusive breast feeding between 3 and 6 months postpartum. Exclusive breast feeding rates declined in both hospitals at 3 and 6 months postpartum with lack of community services for lactation being a major reason. Although BFHI-hospital staff (n=9) were more conversant with BFHI principles, defects in adherence to the BFHI 10 Steps were identified. Conclusions This is the first study assessing the effectiveness of BFHI implementation in Saudi Arabia. Although women reported increased breast feeding rates, we identified important weaknesses that could be improved through strict compliance with BFHI practices. PMID:27986740
Riley, S.C.; Tatara, C.P.; Scheurer, J.A.
2005-01-01
We quantified the aggression and feeding of naturally reared steelhead (Oncorhynchus mykiss) fry stocked into a laboratory flume with naturally reared fry or hatchery-reared fry from conventional and enriched rearing environments at three densities in the presence and absence of predators, and compared the aggression and feeding observed in the flume to that observed in two streams. Steelhead fry attack rate increased with density and was reduced in the presence of predators, but was not affected by rearing treatment. Threat rate appeared to increase with density and was significantly affected by rearing treatment combination, but was not significantly affected by predator presence. Feeding rate was not affected by density or rearing treatment, but was reduced in the presence of predators. The rate of aggression by steelhead fry in two streams was lower than that observed in the laboratory and did not increase with density. Rates of aggression and feeding of hatchery-reared and wild steelhead fry were not significantly different in the streams. Overall, we found no evidence that hatchery rearing environments caused higher aggression in steelhead fry. Laboratory observations of salmonid aggression, particularly at high density, may not reflect aggression levels in the wild. ?? 2005 NRC.
Lewis, Alex J.; Borole, Abhijeet P.
2016-06-16
We investigated the effect of flow rate and recycle on the conversion of a biomass-derived pyrolysis aqueous phase in amicrobial electrolysis cell (MEC) to demonstrate production of renewable hydrogen in biorefinery. A continuous MEC operation was investigated under one-pass and recycle conditions usingthe complex, biomass-derived, fermentable, mixed substrate feed at a constant concentration of 0.026 g/L,while testing flow rates ranging from 0.19 to 3.6 mL/min. This corresponds to an organic loading rate (OLR) of 0.54₋10 g/L-day. Mass transfer issues observed at low flow rates were alleviated using high flow rates.Increasing the flow rate to 3.6 mL/min (3.7 min HRT) duringmore » one-pass operation increased the hydrogen productivity 3-fold, but anode conversion efficiency (ACE) decreased from 57.9% to 9.9%. Recycle of the anode liquid helped to alleviate kinetic limitations and the ACE increased by 1.8-fold and the hydrogen productivity by 1.2-fold compared to the one-pass condition at the flow rate of 3.6 mL/min (10 g/L-d OLR). High COD removal was also achieved under recycle conditions, reaching 74.2 1.1%, with hydrogen production rate of 2.92 ± 0.51 L/L-day. This study demonstrates the advantages of combining faster flow rates with a recycle process to improve rate of hydrogen production from a switchgrass-derived stream in the biorefinery.« less
Thanneermalai, M; Jeyaraman, T; Sivakumar, C; Gopalan, A; Vasudevan, T; Wen, T C
2003-07-01
Electrochemical copolymerization of diphenylamine (DPA) with m-methoxy aniline (MA) was carried out in 4 M H(2)SO(4) by cyclic voltammetry (CV). Cyclic voltammograms (CVs) of the copolymer films were recorded in monomer-free background electrolyte. In situ sepectroelectrochemical studies were carried out on an optically transparent electrode (Indium tin oxide (ITO) coated glass) in 4 M H(2)SO(4) for different feed ratios of the comonomers. Constant potential and potential sweep methods were employed for performing polymerization. UV-visible absorption spectra were collected continuously and concurrently during the copolymerization in both the cases. The results from constant potential electropolymerisation indicated the formation of an intermediate with an absorption peak at 576 nm. Derivative cyclic voltabsorptogram (DCVA) was deduced from the results of cyclic spectrovoltammetry. The DCVA derived at 576 nm confirms the intermediates formed during the electrochemical copolymerization. The compositional changes of the two monomers in the copolymers with changes in feed composition of two monomers as predicted from in situ spectro electrochemical studies are evident from elemental analysis. A plausible copolymerization mechanism is suggested.
NASA Technical Reports Server (NTRS)
DeMore, W.B.
1996-01-01
Relative rate experiments are used to measure rate constants and temperature dependencies of the reactions of OH with CH3F (41), CH2FCl (31), CH2BrCl (30B1), CH2Br2 (3OB2), CHBr3 (2OB3), CF2BrCHFCl (123aBl(alpha)), and CF2ClCHCl2 (122). Rate constants for additional compounds of these types are estimated using an empirical rate constant estimation method which is based on measured rate constants for a wide range of halocarbons. The experimental data are combined with the estimated and previously reported rate constants to illustrate the effects of F, Cl, and Br substitution on OH rate constants for a series of 19 halomethanes and 25 haloethanes. Application of the estimation technique is further illustrated for some higher hydrofluorocarbons (HFCs), including CHF2CF2CF2CF2H (338pcc), CF3CHFCHFCF2CF3 (43-10mee), CF3CH2CH2CF3 (356ffa), CF3CH2CF2CH2CF3 (458mfcf), CF3CH2CHF2 (245fa), and CF3CH2CF2CH3 (365mfc). The predictions are compared with literature data for these compounds.
NASA Astrophysics Data System (ADS)
Platto, Sara; Wang, Ding; Wang, Kexiong
2016-11-01
This study examines whether a group of captive false killer whales ( Pseudorca crassidens ) showed variations in the vocal rate around feeding times. The high level of motivation to express appetitive behaviors in captive animals may lead them to respond with changes of the behavioral activities during the time prior to food deliveries which are referred to as food anticipatory activity. False killer whales at Qingdao Polar Ocean World (Qingdao, China) showed significant variations of the rates of both the total sounds and sound classes (whistles, clicks, and burst pulses) around feedings. Precisely, from the Transition interval that recorded the lowest vocalization rate (3.40 s/m/d), the whales increased their acoustic emissions upon trainers' arrival (13.08 s/m/d). The high rate was maintained or intensified throughout the food delivery (25.12 s/m/d), and then reduced immediately after the animals were fed (9.91 s/m/d). These changes in the false killer whales sound production rates around feeding times supports the hypothesis of the presence of a food anticipatory vocal activity. Although sound rates may not give detailed information regarding referential aspects of the animal communication it might still shed light about the arousal levels of the individuals during different social or environmental conditions. Further experiments should be performed to assess if variations of the time of feeding routines may affect the vocal activity of cetaceans in captivity as well as their welfare.
Pattern recognition monitoring of PEM fuel cell
Meltser, M.A.
1999-08-31
The CO-concentration in the H{sub 2} feed stream to a PEM fuel cell stack is monitored by measuring current and voltage behavior patterns from an auxiliary cell attached to the end of the stack. The auxiliary cell is connected to the same oxygen and hydrogen feed manifolds that supply the stack, and discharges through a constant load. Pattern recognition software compares the current and voltage patterns from the auxiliary cell to current and voltage signature determined from a reference cell similar to the auxiliary cell and operated under controlled conditions over a wide range of CO-concentrations in the H{sub 2} fuel stream. 4 figs.
Pattern recognition monitoring of PEM fuel cell
Meltser, Mark Alexander
1999-01-01
The CO-concentration in the H.sub.2 feed stream to a PEM fuel cell stack is monitored by measuring current and voltage behavior patterns from an auxiliary cell attached to the end of the stack. The auxiliary cell is connected to the same oxygen and hydrogen feed manifolds that supply the stack, and discharges through a constant load. Pattern recognition software compares the current and voltage patterns from the auxiliary cell to current and voltage signature determined from a reference cell similar to the auxiliary cell and operated under controlled conditions over a wide range of CO-concentrations in the H.sub.2 fuel stream.
An automatic 14-day paste diet feeder for animals
NASA Technical Reports Server (NTRS)
Vasques, Marilyn; Mulenburg, Jerry; Gundo, Dan; Griffith, Jon
1994-01-01
During a centrifuge experiment, any interruption that requires stopping the centrifuge may influence the results. Centrifuges often must be stopped for animal maintenance (food, water and waste removal), especially in cases of timed feedings. To eliminate the need for stopping the centrifuge while still providing timed feeding, an automatic paste diet feeder was developed. The feeder is based on a constant volume concept and can deliver a predetermined amount of paste diet at specified time intervals. This unit was supported by water delivery and waste collection systems. The entire system performed reliably and maintained the animals well for a continuous centrifugation experiment of 14 days.
Interactions between sleeping position and feeding on cardiorespiratory activity in preterm infants.
Fifer, William P; Myers, Michael M; Sahni, Rakesh; Ohira-Kist, Kiyoko; Kashyap, Sudha; Stark, Raymond I; Schulze, Karl F
2005-11-01
Infants sleeping in the prone position are at greater risk for sudden infant death syndrome (SIDS). Sleep position-dependent changes in cardiorespiratory activity may contribute to this increased risk. Cardiorespiratory activity is also affected by feeding. Twenty prematurely-born infants were studied at 31-36 weeks postconceptional age while sleeping in the prone and supine positions. Heart rate, respiratory rate, and patterns of variability were recorded during interfeed intervals, and effects of position and time after feeding were analyzed by repeated measures analyses of variance. There were significant effects of both sleeping position and time after feeding. Heart rate is higher and heart period variability is lower in the prone position, and the effects of sleeping position on cardiac functioning are more pronounced during the middle of the intrafeed interval. In preterm infants, autonomic responses to nutrient processing modulate the cardiorespiratory effects of sleeping position. Prone sleeping risk may vary with time after feeding. Copyright 2005 Wiley Periodicals, Inc.
Post-combustion CO2 capture with activated carbons using fixed bed adsorption
NASA Astrophysics Data System (ADS)
Al Mesfer, Mohammed K.; Danish, Mohd; Fahmy, Yasser M.; Rashid, Md. Mamoon
2018-03-01
In the current work, the capturing of carbon dioxide from flue gases of post combustion emission using fixed bed adsorption has been carried out. Two grades of commercial activated carbon (sorbent-1 and sorbent-2) were used as adsorbent. Feed consisting of CO2 and N2 mixture was used for carrying out the adsorption. The influence of bed temperature, feed rate, equilibrium partial pressure and initial % CO2 in feed were considered for analyzing adsorption-desorption process. It was found that the total adsorption-desorption cycle time decreases with increased column temperature and feed rates. The time required to achieve the condition of bed saturation decreases with increased bed temperature and feed rates. The amount of CO2 adsorbed/Kg of the adsorbent declines with increased bed temperature with in studied range for sorbent-1 and sorbent-2. It was suggested that the adsorption capacity of the both the sorbents increases with increased partial pressure of the gas.
Beale, Norman; Kane, Gill; Gwynne, Mark; Peart, Carole; Taylor, Gordon; Herrick, David; Boyd, Andy
2006-01-01
Background Breast-feeding rates in the UK are known to vary by maternal socio-economic status but the latter function is imperfectly defined. We test if CTVB (Council Tax Valuation Band – a categorical assessment of UK property values and amenities governing local tax levies) of maternal address predicts, in a large UK regional sample of births, (a) breast-feeding (b) personal and socio-economic attributes of the mothers. Methods Retrospective study of a subset (n.1390 selected at random) of the ALSPAC sample (Avon Longitudinal Study of Parents and Children), a large, geographically defined cohort of mothers followed from early pregnancy to 8 weeks post-delivery. Outcome measures are attitudes to breast-feeding prior to delivery, breast-feeding intention and uptake, demographic and socio-economic attributes of the mothers, CTVB of maternal home address at the time of each birth. Logistic regression analysis, categorical tests. Results Study sample: 1360 women divided across the CTVBs – at least 155 in any band or band aggregation. CTVB predicted only one belief or attitude – that bottle-feeding was more convenient for the mother. However only 31% of 'CTVB A infants' are fully breast fed at 4 weeks of life whereas for 'CTVB E+ infants' the rate is 57%. CTVB is also strongly associated with maternal social class, home conditions, parental educational attainment, family income and smoking habit. Conclusion CTVB predicts breast-feeding rates and links them with social circumstances. CTVB could be used as the basis for accurate resource allocation for community paediatric services: UK breast-feeding rates are low and merit targeted promotion. PMID:16405729
Effectiveness of the Baby Friendly Community Initiative in Italy: a non-randomised controlled study
Cattaneo, Adriano; Bettinelli, Maria Enrica; Chapin, Elise; Macaluso, Anna; Córdova do Espírito Santo, Lílian; Murante, Anna Maria; Montico, Marcella
2016-01-01
Objective To assess the effectiveness of the Baby Friendly Community Initiative (BFCI) on exclusive breast feeding at 6 months. Design Controlled, non-randomised trial. Setting 18 Local Health Authorities in 9 regions of Italy. Participants 5094 mother/infant dyads in 3 cohorts were followed up to 12 months after birth in 3 rounds of data collection: at baseline, after implementation of the intervention in the early intervention group and after implementation in the late intervention group. 689 (14%) dyads did not complete the study. Intervention Implementation of the 7 steps of the BFCI. Main outcome measures The rate of exclusive breast feeding at 6 months was the primary outcome; breast feeding at discharge, 3 and 12 months was also measured. Results The crude rates of exclusive breast feeding at discharge, 3 and 6 months, and of any breast feeding at 6 and 12 months increased at each round of data collection after baseline in the early and late intervention groups. At the end of the project, 10% of infants were exclusively breast fed at 6 months and 38% were continuing to breast feed at 12 months. However, the comparison by adjusted rates and logistic regression failed to show statistically significant differences between groups and rounds of data collection in the intention-to-treat analysis, as well as when compliance with the intervention and training coverage was taken into account. Conclusions The study failed to demonstrate an effect of the BFCI on the rates of breast feeding. This may be due, among other factors, to the time needed to observe an effect on breast feeding following this complex intervention. PMID:27154476
Effect of passive smoking on growth and infection rates of breast-fed and non-breast-fed infants.
Yilmaz, Gonca; Hizli, Samil; Karacan, Candemir; Yurdakök, Kadriye; Coşkun, Turgay; Dilmen, Uğur
2009-06-01
The aim of the present study was to determine the effect of passive tobacco smoking on growth and infection rate of infants, and to evaluate whether breast-feeding might be protective against harmful effects of cigarette smoke. A cross-sectional study on 254 6-7-month-old infants was carried out. A questionnaire was given to mothers; and infants' head circumference, bodyweight, height, and urinary cotinine levels were measured. Multivariate analysis of factors influencing lower respiratory tract infections showed that smoking mothers increased the rate by 9.1-fold; breast-feeding decreased it by 3.3-fold; formula feeding at birth increased it by a factor of 15.2; another smoker at home increased it by a factor of 40.1. Multivariate analysis of factors influencing upper respiratory tract infections showed that smoking mothers increased the rate by a factor of 23; early formula feeding increased it by a factor of 62; breast-feeding decreased it by a factor of 5; smoking fathers increased it by a factor of 15. Multivariate analysis of factors influencing otitis media found that smoking mothers and fathers increased it by a factor of 9.4 and 6.15, respectively, and breast-feeding decreased it by a factor of 5.4. Tobacco smoke exposure of infants has negative consequences on growth, otitis media, and upper and lower respiratory tract infections. Breast-feeding promoted the growth of infants who were passively exposed to tobacco smoke and protected them against infections. Smoking should not be permitted in households with infants. When this is impossible, breast-feeding should be promoted to protect the infants against the health hazards of passive smoking.
Weber, Ashley M; Harrison, Tondi M
2014-12-01
Little is known about the relationship between maternal behavior and the stability of premature infants' physiologic responses during feeding. In a secondary data analysis, we examined relationships between quality of maternal behavior and cardiorespiratory physiology during feeding in 61 premature and 53 term infants at four times over the first year of life. Measures included heart rate (HR), respiratory rate (RR), and oxygen saturation; Child Feeding Skills Checklist; and Parent-Child Early Relational Assessment. Birthweight, gestational age, and neurodevelopmental risk were covariates. Quality of maternal behavior did not predict infants' physiologic response to feeding. However, birthweight was related to infant feeding physiology among all infants over the first year of life. Stress during fetal life, which may lead to impaired intrauterine growth and low birthweight, may have longitudinal effects on cardiorespiratory functioning of premature infants. Research is needed to further investigate the biological pathways by which maternal-infant interaction supports behavioral and physiologic feeding outcomes of premature infants. © 2014 Wiley Periodicals, Inc.
Influence of Process Parameters on the Process Efficiency in Laser Metal Deposition Welding
NASA Astrophysics Data System (ADS)
Güpner, Michael; Patschger, Andreas; Bliedtner, Jens
Conventionally manufactured tools are often completely constructed of a high-alloyed, expensive tool steel. An alternative way to manufacture tools is the combination of a cost-efficient, mild steel and a functional coating in the interaction zone of the tool. Thermal processing methods, like laser metal deposition, are always characterized by thermal distortion. The resistance against the thermal distortion decreases with the reduction of the material thickness. As a consequence, there is a necessity of a special process management for the laser based coating of thin parts or tools. The experimental approach in the present paper is to keep the energy and the mass per unit length constant by varying the laser power, the feed rate and the powder mass flow. The typical seam parameters are measured in order to characterize the cladding process, define process limits and evaluate the process efficiency. Ways to optimize dilution, angular distortion and clad height are presented.
Combustion Instability Analysis and the Effects of Drop Size on Acoustic Driving Rocket Flow
NASA Technical Reports Server (NTRS)
Harper, Brent (Technical Monitor); Ellison, L. Renea; Moser, Marlow D.
2004-01-01
High frequency combustion instability, the most destructive kind, is generally solved on a per engine basis. The instability often is the result of compounding acoustic oscillations, usually from the propellant combustion itself. To counteract the instability the chamber geometry can be changed and/or the method of propellant injection can be altered. This experiment will alter the chamber dimensions slightly; using a cylindrical shape of constant diameter and the length will be varied from six to twelve inches in three-inch increments. The main flowfield will be the products of a high OF hydrogen/oxygen flow. The liquid fuel will be injected into this flowfield using a modulated injector. It will allow for varied droplet size, feed rate, spray pattern, and location for the mixture within the chamber. The response will be deduced from the chamber pressure oscillations.
Wang, Xueshen; Li, Qunqing; Xie, Jing; Jin, Zhong; Wang, Jinyong; Li, Yan; Jiang, Kaili; Fan, Shoushan
2009-09-01
We report the controlled growth of ultralong single-wall carbon nanotube (SWNT) arrays using an improved chemical vapor deposition strategy. Using ethanol or methane as the feed gas, monodispersed Fe-Mo as the catalyst, and a superaligned carbon nanotube (CNT) film as the catalyst supporting frame, ultralong CNTs over 18.5 cm long were grown on Si substrates. The growth rate of the CNTs was more than 40 mum/s. No catalyst-related residual material was found on the substrates due to the use of a CNT film as the catalyst supporting frame, facilitating any subsequent fabrication of SWNT-based devices. Electrical transport measurements indicated that the electrical characteristics along a single ultralong SWNT were uniform. We also found that maintaining a spatially homogeneous temperature during the growth process was a critical factor for obtaining constant electrical characteristics along the length of the ultralong SWNTs.
Rioja, R; García, M T; Peña, M; González, G
2008-06-01
Continuous decolourisation of wastewater from molasses fermentation using mycelium of Trametes versicolor in pellets shape was performed in an airlift bioreactor (semi-pilot scale) with the aim of operating steadily for a long period, maintaining the colour removal activity. The influences of influent flow and glucose feed rate were tested. Induction of peroxidases secretion by Mn(2+) addition was also studied. The efficiency of the decolourisation process was followed by monitoring colour and enzymatic activities. The experimental results showed that continuous decolourisation in an airlift bioreactor can be considered a suitable alternative for treating molasses fermentation wastewater. A colour removal yield around 60% remained practically constant during 23 days under continuous operation. Laccase was found to be the main enzyme secreted by the strain, being responsible for the decolourisation process. Mn(2+) addition was not likely to induct manganese-dependent peroxidase secretion.
Yan, Kun; Gao, Xiang; Luo, Yingwu
2015-07-01
A highly living polymer with over 100 kg mol(-1) molecular weight is very difficult to achieve by controlled radical polymerization since the unavoidable side reactions of irreversible radical termination and radical chain transfer to monomer reaction become significant. It is reported that over 500 kg mol(-1) polystyrene with high livingness and low dispersity could be synthesized by a facile two-stage reversible addition-fragmentation transfer emulsion polymerization. The monomer conversion reaches 90% within 10 h. High livingness of the product is ascribed to the extremely low initiator concentration and the chain transfer constant for monomer unexpectedly much lower than the well-accepted values in the conventional radical polymerization. The two-stage monomer feeding policy much decreases the dispersity of the product. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Voss, Rüdiger; Hinrichsen, Hans-Harald; Wieland, Kai
2001-01-01
Background Changes in the survival-rate during the larval phase may strongly influence the recruitment level in marine fish species. During the larval phase different 'critical periods' are discussed, e.g. the hatching period and the first-feeding period. No such information was available for the Baltic cod stock, a commercially important stock showing reproduction failure during the last years. We calculated field-based mortality rates for larval Baltic cod during these phases using basin-wide abundance estimates from two consecutive surveys. Survey information was corrected by three dimensional hydrodynamic model runs. Results The corrections applied for transport were of variable impact, depending on the prevailing circulation patterns. Especially at high wind forcing scenarios, abundance estimates have the potential to be biased without accounting for transport processes. In May 1988 mortality between hatch and first feeding amounted to approximately 20% per day. Mortality rates during the onset of feeding were considerably lower with only 7% per day. In August 1991 the situation was vice versa: Extremely low mortality rates of 0.08% per day were calculated between hatch and first feeding, while the period between the onset of feeding to the state of an established feeder was more critical with mortality rates of 22% per day. Conclusions Mortality rates during the different proposed 'critical periods' were found to be highly variable. Survival rates of Baltic cod are not only influenced by a single 'critical period', but can be limited at different points during the larval phase, depending on several biotic and abiotic factors. PMID:11737879
Bigger, Harold; Patel, Aloka L.; Rossman, Beverly; Fogg, Louis F.; Meier, Paula
2015-01-01
Abstract Background: Little is known about human milk (HM) feeding goals for mothers of very low birth weight (VLBW) (<1,500 g birth weight) infants, especially for black mothers, for whom rates of VLBW birth are higher and lactation rates lower. This study examined the establishment, modification, and achievement of HM feeding goals during neonatal intensive care unit (NICU) hospitalization for mothers of VLBW infants and the influence of maternal race and income. Materials and Methods: A prospective cohort study measured maternal HM feeding goals (exclusive [EHM], partial, none) predelivery and during three time intervals: day of life (DOL) 1–14, 15–28, and 29–72. Goal achievement compared the goal for the time interval with the proportion of HM feedings received by the infant. Goal establishment, modification, and achievement were examined using chi-squared and contingency tables. Results: Three hundred fifty-two mother–infant dyads (53% black; 70% low-income; mean birth weight, 1,048 g) were studied. Predelivery, 55% of mothers planned to provide EHM; fewer black and low-income mothers chose EHM. During DOL 1–14, 63% of mothers chose EHM, and predelivery racial differences disappeared. Only 10% of mothers chose exclusive at-breast EHM feedings. EHM feeding goals decreased during NICU hospitalization, especially for black mothers. Whereas most mothers met their HM feeding goals initially, achievement rates declined during hospitalization. Mothers' EHM goal achievement was not influenced by race or income. Conclusions: Mothers changed their predelivery HM feeding goals after birth of a VLBW infant. Longitudinally, HM feeding goals and achievement reflected less HM use, highlighting the need to target lactation maintenance in this population. PMID:26110439
NASA Astrophysics Data System (ADS)
Pan, Ying; Yan, Shi-Wei; Li, Ruo-Zhu; Hu, Yi-Wen; Chang, Xue-Xiu
2017-01-01
Although the well-known antibiotic norfloxacin (NOR) is recognized as an important environmental pollutant, little is known about its impacts on ecological processes, particularly on species interactions. In this paper, we quantified Daphnia magna (Crustacea, Cladocera) responses in mortality rate at lethal NOR concentrations (0, 25, 50, 100, 200, 300 and 400 mg L-1), and in heartbeat rate, swimming behavior and feeding rate (on the green alga Chlorella pyrenoidosa) at sublethal NOR concentrations (0, 25, 50 and 100 mg L-1) to determine the effects of this antibiotic in plankton systems. In 96-h-long lethal experiment, mortality rates of D. magna increased significantly with increasing NOR concentration and exposure time. In sublethal experiments, heartbeat rate decreased, while time ratio of vertical to horizontal swimming (TVH) and the duration of quiescence increased in D. magna individuals exposed to increasing NOR concentrations after 4 and 12 h of exposure. These collectively led to decreases in both average swimming ability and feeding rate, consistent with the positive relationship between average swimming ability and feeding rate. Overall, results indicate that, by affecting zooplankton heartbeat rate and behavior, NOR decreased feeding efficiency of D. magna even at low doses, therefore, it might seriously compromise ecosystem health and function.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Soudackov, Alexander V.; Hammes-Schiffer, Sharon
2015-11-21
Rate constant expressions for vibronically nonadiabatic proton transfer and proton-coupled electron transfer reactions are presented and analyzed. The regimes covered include electronically adiabatic and nonadiabatic reactions, as well as high-frequency and low-frequency proton donor-acceptor vibrational modes. These rate constants differ from previous rate constants derived with the cumulant expansion approach in that the logarithmic expansion of the vibronic coupling in terms of the proton donor-acceptor distance includes a quadratic as well as a linear term. The analysis illustrates that inclusion of this quadratic term in the framework of the cumulant expansion framework may significantly impact the rate constants at highmore » temperatures for proton transfer interfaces with soft proton donor-acceptor modes that are associated with small force constants and weak hydrogen bonds. The effects of the quadratic term may also become significant in these regimes when using the vibronic coupling expansion in conjunction with a thermal averaging procedure for calculating the rate constant. In this case, however, the expansion of the coupling can be avoided entirely by calculating the couplings explicitly for the range of proton donor-acceptor distances sampled. The effects of the quadratic term for weak hydrogen-bonding systems are less significant for more physically realistic models that prevent the sampling of unphysical short proton donor-acceptor distances. Additionally, the rigorous relation between the cumulant expansion and thermal averaging approaches is clarified. In particular, the cumulant expansion rate constant includes effects from dynamical interference between the proton donor-acceptor and solvent motions and becomes equivalent to the thermally averaged rate constant when these dynamical effects are neglected. This analysis identifies the regimes in which each rate constant expression is valid and thus will be important for future applications to proton transfer and proton-coupled electron transfer in chemical and biological processes.« less
2011-02-01
only a couple of processing parameters. Table 2 Statistical results of the DOE Run no. Plasma power Feed rate System pressure Quench rate...and quench rate. Particle size was chosen as the measured response due to its predominant effect on material properties. The results of the DOE...showed that feed rate and quench rate have the largest effect on particle size. All synthesized powders were characterized by thermogravimetric
Choi, W M; Lam, C L; Mo, W Y; Wong, M H
2016-04-01
Different types of food wastes, e.g., meats, bones, cereals, fruits, and vegetables, were collected from hotels in Hong Kong, mixed in different ratio, and processed into feed pellets (food wastes (FWs) A, B, and C) for feeding trials in aquaculture species. Grass carp fed with cereal-dominant feed (FW A) showed the best growth (in terms of specific growth rate, relative weight gain, and protein efficiency ratio), among all food waste feeds. However, the growth rates of food waste groups especially the meat product-contained feeds (FW B and FW C) were lower than the commercial feed, Jinfeng(®) 613 formulation (control). The results indicated that grass carp utilized plant proteins better than animal proteins and preferred carbohydrate as a major energy source than lipid. The high-lipid content in feed containing meat products was also a possible reason for hindering growth and resulted high body lipid. It is suggested that lipid should be removed in the preparation of food waste feed or further investigations by implementing supplements, e.g., enzymes in feed to enhance lipid or protein utilization by fish. This utilization of food waste could be an effective and practical way to deal with these wastes in this densely populated city.
NASA Astrophysics Data System (ADS)
Alissianto, Y. R.; Sandriani, Z. A.; Rahardja, B. S.; Agustono; Rozi
2018-04-01
High market demand of mud crab (Scylla serrata) encourages farmers to increase the production of mud crab. However, mud crab can not synthesize essential amino acids, so it is necessary to supply essential amino acids such as lysine and methionine in the diet. This study aims to determine the effect of lysine and methionine on feeds to increase growth and retention of mud crabs (Scylla serrata). In this study the amount of lysine amino acid and methionine added to the trash fish diet were: P0 (0: 0%); P1 (0.75: 0.75%); P2 (1: 1%); P3 (1.25: 1.25%); P4 (1.5: 1.5%) with the ratio of lysine and methionine 1: 1. The parameters observed in this study were Survival Rate (SR), Specific Growth Rate (SGR), Feed Conversion Ratio (FCR), Efficiency Feed (EF), protein retention and energy retention. The results of the 35-day maintenance study showed significant differences (P <0.05) against Specific Growth Rate (SGR), Feed Conversion Ratio (FCR), Efficiency Feed (EF), protein retention and no significant effect (P> 0.05) on energy retention and Survival Rate (SR) on mud crab. The best results in this study were found in P4 treatment with addition of lysine amino acids and methionine (1.5: 1.5%).
Wang, Y; Li, Y; Willems, E; Willemsen, H; Franssens, L; Koppenol, A; Guo, X; Tona, K; Decuypere, E; Buyse, J; Everaert, N
2014-04-01
It is not rare that newly hatched chicks remain without feed for about 24 to 48 h before they are placed on farms due to a series of logistic operations. Furthermore, the spread in hatching time can also mount up to 30 to 48 h for late v. early hatchers. In other words, the practice is a complex combination of spread of hatch and delayed feed access. The present study was aimed to investigate the combined effects of hatching time with a delay in feed access of 48 h, starting from their hatch-time (biological age). When chicks had access to feed immediately after hatch, late hatchers had a higher feed intake and relative growth rate up to day 5 compared with their early hatched counterparts. Feed deprivation during the first 48 h resulted in retarded early growth rate, which was further aggravated by an impaired feed intake after refeeding. In addition, the differential effects of hatching time on relative growth rate and feed intake observed in immediately fed chicks were eliminated by the 48 h feed delay. The yolk utilization after hatch was faster for the late hatchers up to biological day 2 regardless of the feeding treatments. Hatching muscle glycogen content was higher in the late hatchers compared with that of their early counterparts at hatch and at biological day 2 independent of feeding treatment. Moreover, the liver glycogen content of the late hatchers was also higher at hatch. For the immediately fed chicks, the proportional breast muscle weight of the late hatchers was higher at biological day 2 and 5. For the starved chicks, on the other hand, this effect was only observed after they had access to feed (biological day 5). The different plasma T3 levels at hatch may have contributed to the different post hatch performance. It is concluded that the spread of hatch influenced post hatch performance, especially appetite and growth at least until day 5. Moreover, the delay in feed access interacted with the hatching time and caused adverse effects on the post hatch performance.
Tappis, Hannah; Doocy, Shannon; Haskew, Christopher; Wilkinson, Caroline; Oman, Allison; Spiegel, Paul
2012-06-01
The United Nations High Commissioner for Refugees (UNHCR) Health Information System is a primary source of routine nutrition program data and provides a comprehensive assessment of UNHCR selective feeding programs in more than 90 refugee camps in 18 countries worldwide. To evaluate the coverage and effectiveness of UNHCR supplementary and therapeutic feeding programs for malnourished children under 5 years of age in Kenya and Tanzania refugee camps. Analysis of Kenya and Tanzania refugee camp population, growth monitoring and nutrition program data from the UNHCR Health Information System. UNHCR-supported implementing partners in Kenya and Tanzania admitted nearly 45,000 malnourished refugee children in selective feeding programs between January 2006 and May 2009. Average recovery rates of 77.1% and 84.6% in the therapeutic and supplementary programs, respectively, mortality rates of less than 1%, and average readmission below 5% suggest that feeding programs had a beneficial effect on enrolled children. Increasing admission and enrollment in supplementary feeding programs was successful in preventing cases of severe malnutrition in some camps. Further attention to these camps would be likely to yield sizeable benefits in terms of absolute reductions in malnutrition prevalence and mortality rates.
Factors influencing bird foraging preferences among conspecific fruit trees
Foster, M.S.
1990-01-01
The rates at which birds visit fruiting individuals of Allophylus edulis (Sapindaceae) differ substantially among trees. Such avian feeding preferences are well-known, but usually involve fruits and trees of different species. Factors controlling avian preferences for particular trees in a population of conspecifics are generally undocumented. To address this issue, I attempted to correlate rates at which individual birds and species fed in trees of Allophylus with 27 fruit or plant characteristics. Birds that swallow fruits whole were considered separately from those that feed in other ways. Plant characters were selected on the basis of their potential influence on feeding efficiency or predation risk, assuming that birds would select feeding trees so as to maximize the net rate of energy or nutrient intake and to minimize predation. Correlations were found between feeding visits by some groups of birds and percent water in the pulp, milligrams of mineral ash in the pulp, and crop size. No character was correlated with feeding visits by all groups of birds in both years of the study. The correlations with water and mineral ash are unexplained and may be artifacts. The correlation with crop size may represent a tactic to minimize predation.
Ku-Band Traveling Wave Slot Array Using Simple Scanning Control
NASA Technical Reports Server (NTRS)
Host, Nicholas K.; Chen, Chi-Chih; Volakis, John L.; Miranda, Felix A.
2015-01-01
This poster introduces a feeding concept aimed at simplifying the backend (phase shifters) of traditional phased arrays. As an alternative to traditional phased arrays, we employ a traveling wave array (TWA) using a single feedline whose propagation constant is controlled via a single, small mechanical movement without a need for phase shifters to enable scanning. Specifically, a dielectric plunger is positioned within a parallel plate waveguide (PPW) transmission line (TL) that feeds the TWA. By adjusting the position of the dielectric plunger within the PPW feeding the TWA, beam steering is achieved. A 20-element array is designed at 13 gigaherz shown to give stable realized gain across the angular range of minus 25 degrees less than or equal to theta and less than or equal to 25 degrees. A proof of concept array is fabricated and measured to demonstrate and validate the concept's operation.
Ku-Band Traveling Wave Slot Array Using Simple Scanning Control
NASA Technical Reports Server (NTRS)
Host, Nicholas K.; Chen, Chi-Chih; Volakis, John L.; Miranda, Felix A.
2015-01-01
This paper introduces a feeding concept aimed at simplifying the backend (phase shifters) of traditional phased arrays. As an alternative to traditional phased arrays, we employ a traveling wave array (TWA) using a single feedline whose propagation constant is controlled via a single, small mechanical movement without a need for phase shifters to enable scanning. Specifically, a dielectric plunger is positioned within a parallel plate waveguide (PPW) transmission line (TL) that feeds the TWA. By adjusting the position of the dielectric plunger within the PPW feeding the TWA, beam steering is achieved. A 20 element array is designed at 13GHz shown to give stable realized gain across the angular range of -25 deg. less than or equal to theta less than or equal to 25 deg. A proof of concept array is fabricated and measured to demonstrate and validate the concept's operation.
Kalinowski, Alison; Krause, Kylene; Berdejo, Carla; Harrell, Kristina; Rosenblum, Katherine; Lumeng, Julie C
2012-01-01
To examine beliefs about the role of parenting in feeding and childhood obesity among mothers of lower socioeconomic status. Individual semistructured, audiotaped interview with 91 mothers of preschool-aged children (49% of mothers obese, 21% of children obese) in the midwestern United States. Participant comments were transcribed and common themes were identified using the constant comparative method and NVivo software. Mothers often described their parents' feeding style as authoritarian or neglectful, and their own current style as comparatively indulgent and better. Mothers described parents of overweight children as inept or neglectful, but they never described their own parenting as such. Encouraging mothers to reflect on how they were fed as children, how it may influence their current parenting, and how the relationship between mothering and child obesity is complex are important nutrition education opportunities. Copyright © 2012 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.
Compact Feeding Network for Array Radiations of Spoof Surface Plasmon Polaritons
NASA Astrophysics Data System (ADS)
Xu, Jun Jun; Yin, Jia Yuan; Zhang, Hao Chi; Cui, Tie Jun
2016-03-01
We propose a splitter feeding network for array radiations of spoof surface plasmon polaritons (SPPs), which are guided by ultrathin corrugated metallic strips. Based on the coupled mode theory, SPP fields along a single waveguide in a certain frequency range can be readily coupled into two adjacent branch waveguides with the same propagation constants. We propose to load U-shaped particles anti-symmetrically at the ends of such two branch waveguides, showing a high integration degree of the feeding network. By controlling linear phase modulations produced by the U-shaped particle chain, we demonstrate theoretically and experimentally that the SPP fields based on bound modes can be efficiently radiated to far fields in broadside direction. The proposed method shows that the symmetry of electromagnetic field modes can be exploited to the SPP transmission network, providing potential solutions to compact power dividers and combiners for microwave and optical devices and systems.
Kalinowski, Alison; Krause, Kylene; Berdejo, Carla; Harrell, Kristina; Rosenblum, Katherine; Lumeng, Julie C.
2010-01-01
Objective To examine beliefs about the role of parenting in feeding and childhood obesity among mothers of lower socioeconomic status. Methods Individual semi-structured audio-taped interview with 91 mothers of preschool-aged children (49% of mothers obese, 21% of children obese) in the Midwestern United States. Participant comments were transcribed and common themes identified using the constant comparative method and NVivo software. Results Mothers often described their parents’ feeding style as authoritarian or neglectful, and their own current style as comparatively indulgent and better. Mothers described parents of overweight children as inept or neglectful, but never described their own parenting as such. Conclusions and Implications Encouraging mothers to reflect on how they were fed as children, how it may impact their current parenting, and how the relationship between mothering and child obesity is complex are important nutrition education opportunities. PMID:21724469
Bridging scales through multiscale modeling: a case study on protein kinase A.
Boras, Britton W; Hirakis, Sophia P; Votapka, Lane W; Malmstrom, Robert D; Amaro, Rommie E; McCulloch, Andrew D
2015-01-01
The goal of multiscale modeling in biology is to use structurally based physico-chemical models to integrate across temporal and spatial scales of biology and thereby improve mechanistic understanding of, for example, how a single mutation can alter organism-scale phenotypes. This approach may also inform therapeutic strategies or identify candidate drug targets that might otherwise have been overlooked. However, in many cases, it remains unclear how best to synthesize information obtained from various scales and analysis approaches, such as atomistic molecular models, Markov state models (MSM), subcellular network models, and whole cell models. In this paper, we use protein kinase A (PKA) activation as a case study to explore how computational methods that model different physical scales can complement each other and integrate into an improved multiscale representation of the biological mechanisms. Using measured crystal structures, we show how molecular dynamics (MD) simulations coupled with atomic-scale MSMs can provide conformations for Brownian dynamics (BD) simulations to feed transitional states and kinetic parameters into protein-scale MSMs. We discuss how milestoning can give reaction probabilities and forward-rate constants of cAMP association events by seamlessly integrating MD and BD simulation scales. These rate constants coupled with MSMs provide a robust representation of the free energy landscape, enabling access to kinetic, and thermodynamic parameters unavailable from current experimental data. These approaches have helped to illuminate the cooperative nature of PKA activation in response to distinct cAMP binding events. Collectively, this approach exemplifies a general strategy for multiscale model development that is applicable to a wide range of biological problems.
FINAL REPORT DM1200 TESTS WITH AZ 101 HLW SIMULANTS VSL-03R3800-4 REV 0 2/17/04
DOE Office of Scientific and Technical Information (OSTI.GOV)
KRUGER AA; MATLACK KS; BARDAKCI T
2011-12-29
This report documents melter and off-gas performance results obtained on the DM 1200 HLW Pilot Melter during processing of simulated HLW AZ-101 feed. The principal objectives of the DM1200 melter testing were to determine the achievable glass production rates for simulated HLW AZ-101 feed; determine the effect of bubbling rate and feed solids content on production rate; characterize melter off-gas emissions; characterize the performance of the prototypical off-gas system components as well as their integrated performance; characterize the feed, glass product, and off-gas effluents; and to perform pre- and post-test inspections of system components. The test objectives (including test successmore » criteria), along with how they were met, are outlined in a table.« less
Farley, David R
2010-09-07
A model has been developed to calculate the ground state rotational populations of homonuclear diatomic molecules in kinetic gases, including the effects of electron-impact excitation, wall collisions, and gas feed rate. The equations are exact within the accuracy of the cross sections used and of the assumed equilibrating effect of wall collisions. It is found that the inflow of feed gas and equilibrating wall collisions can significantly affect the rotational distribution in competition with nonequilibrating electron-impact effects. The resulting steady-state rotational distributions are generally Boltzmann for N≥3, with a rotational temperature between the wall and feed gas temperatures. The N=0,1,2 rotational level populations depend sensitively on the relative rates of electron-impact excitation versus wall collision and gas feed rates.
Bai, Dorothy Li; Fong, Daniel Yee Tak; Lok, Kris Yuet Wan; Wong, Janet Yuen Ha; Tarrant, Marie
2017-02-01
To investigate the prevalence and predictors of expressed breast-milk feeding in healthy full-term infants and its association with total duration of breast-milk feeding. Prospective cohort study. In-patient postnatal units of four public hospitals in Hong Kong. A total of 2450 mother-infant pairs were recruited in 2006-2007 and 2011-2012 and followed up prospectively for 12 months or until breast-milk feeding had stopped. Across the first 6 months postpartum, the rate of exclusive expressed breast-milk feeding ranged from 5·1 to 8·0 % in 2006-2007 and from 18·0 to 19·8 % in 2011-2012. Factors associated with higher rate of exclusive expressed breast-milk feeding included supplementation with infant formula, lack of previous breast-milk feeding experience, having a planned caesarean section delivery and returning to work postpartum. Exclusive expressed breast-milk feeding was associated with an increased risk of early breast-milk feeding cessation when compared with direct feeding at the breast. The hazard ratio (95 % CI) ranged from 1·25 (1·04, 1·51) to 1·91 (1·34, 2·73) across the first 6 months. Mothers of healthy term infants should be encouraged and supported to feed directly at the breast. Exclusive expressed breast-milk feeding should be recommended only when medically necessary and not as a substitute for feeding directly at the breast. Further research is required to explore mothers' reasons for exclusive expressed breast-milk feeding and to identify the health outcomes associated with this practice.
Jejunal feeding tubes can be efficiently and independently placed by intensive care unit teams.
Welpe, Pascal; Frutiger, Adrian; Vanek, Patrik; Kleger, Gian-Reto
2010-01-01
Nutrition support is an important therapeutic measure in critically ill patients. Several studies have shown that the enteral route is preferable to the parenteral route. Insertion of a feeding tube beyond the ligament of Treitz combined with continuous gastric drainage will reduce regurgitation and probably also the rate of nosocomial pneumonia. This study was conducted to assess the safety, success rate, and time required to establish jejunal nutrition by the fluoroscopy-guided technique in intensive care unit (ICU) patients. This was a prospective observational study in the ICUs of a 300-bed and a 600-bed community hospital. Indications were large gastric residuals during attempted gastric feeding, severe acute pancreatitis, or recurrent aspiration. Feeding tubes were introduced by the ICU staff at bedside under fluoroscopic guidance (a senior ICU physician and a resident or a registered ICU nurse). The correct jejunal position was documented by the application of a radiopaque contrast medium through the tube. After confirmation of the correct position, jejunal tube feeding was immediately started. The insertion procedure in 38 patients lasted a median of 17 minutes. The median time from decision to place the tube until start of enteral feeding was 141 minutes. The success rate was 84.2%. No adverse events were observed. Fluoroscopic placement of a jejunal feeding tube at the bedside is fast, is safe, and has a high success rate when performed by well-trained ICU staff. Using this method makes the ICU team more self-sufficient when critically ill patients require enteral nutrition and no gastroenterologist is available.
NASA Astrophysics Data System (ADS)
Xu, Tianwei; Zhao, Na; Hu, Linyong; Xu, Shixiao; Liu, Hongjin; Ma, Li; Zhao, Xinquan
2017-05-01
Herein, methane (CH4), carbon dioxide (CO2) and nitrous oxide (N2O) emission from different aged barn feeding Tibetan sheep were characterized using a respiration chamber in combination with gas chromatograph method in cold season of 2013. This work was based on measuring the increase of gas concentration inside respiration chamber by the means of gas chromatograph. Results indicated that diurnal CH4 emission patterns for barn feeding Tibetan sheep were driven by feeding schedule, diurnal CO2 emission patterns were relatively stable with two slight emission peaks, diurnal N2O emission patterns were driven by the variation of temperature inside chamber. Diurnal CH4 emission rates were 17.65, 19.49 and 21.06 g sheep-1 d-1 for yearling, two-year and three-year barn feeding Tibetan sheep, account for 6.15%, 5.76% and 5.45% of their daily gross energy intakes, respectively. Diurnal CO2 emission rates were 526.88, 588.43 and 640.66 g sheep-1 d-1 for yearling, two-year and three-year barn feeding Tibetan sheep, respectively. Diurnal N2O emission rates were 1.64, 1.25 and 1.05 mg sheep-1 d-1 for yearling, two-year and three-year barn feeding Tibetan sheep, respectively. Three-year barn feeding Tibetan sheep released more CO2-eq on per unit BW and BW0.75 gain basis.
Tuttle, C R; Dewey, K G
1996-09-01
To determine the potential cost savings for four social service programs if breast-feeding rates increased among Hmong women in California. Cost-savings analysis. Hmong women in California. In this population, breast-feeding is currently uncommon, and use of contraceptives is minimal. Savings were based on estimates of the resulting decrease in infant morbidity, maternal fertility, and formula purchases (Special Supplemental Nutrition Program for Women, Infants, and Children) if women breast-fed each child for at least 6 months. Costs were projected over a 7.5-year period and future values were discounted with annual interest rates of 2% or 4%. Substantial savings estimates were associated with breast-feeding for all four programs. The total projected savings over the 7.5-year period ranges from $3,442 to $4,944 (4% discount) to $4,475 to $6,0960 (0% discount) per family enrolled in all four programs. This translates into an estimated yearly savings of between $459 and $659 (4% discount) and $597 and $808 (0% discount) per family. Although health care providers generally accept that breast-feeding is the preferred method for feeding infants, many still view the choice as a neutral one; that is, they consider low breast-feeding rates in the United States a cultural choice with no cost to society. This analysis provides evidence that breast-feeding is economically advantageous for individuals and society.
Feeding behavior and digestive physiology in sea cucumber Apostichopus japonicus.
Sun, Jiamin; Zhang, Libin; Pan, Yang; Lin, Chenggang; Wang, Fang; Kan, Rentao; Yang, Hongsheng
2015-02-01
The feeding behavior and digestive physiology of the sea cucumber, Apostichopus japonicus are not well understood. A better understanding may provide useful information for the development of the aquaculture of this species. In this article the tentacle locomotion, feeding rhythms, ingestion rate (IR), feces production rate (FPR) and digestive enzyme activities were studied in three size groups (small, medium and large) of sea cucumber under a 12h light/12h dark cycle. Frame-by-frame video analysis revealed that all size groups had similar feeding strategies using a grasping motion to pick up sediment particles. The tentacle insertion rates of the large size group were significantly faster than those of the small and medium-sized groups (P<0.05). Feeding activities investigated by charge coupled device cameras with infrared systems indicated that all size groups of sea cucumber were nocturnal and their feeding peaks occurred at 02:00-04:00. The medium and large-sized groups also had a second feeding peak during the day. Both IR and FPR in all groups were significantly higher at night than those during the daytime (P<0.05). Additionally, the peak activities of digestive enzymes were 2-4h earlier than the peak of feeding. Taken together, these results demonstrated that the light/dark cycle was a powerful environment factor that influenced biological rhythms of A. japonicus, which had the ability to optimize the digestive processes for a forthcoming ingestion. Copyright © 2014 Elsevier Inc. All rights reserved.
NASA Astrophysics Data System (ADS)
Gregory Lough, R.; Mountain, David G.
A set of vertically stratified MOCNESS tows made on the southern flank of Georges Bank in spring 1981 and 1983 was analyzed to examine the relationship between larval cod and haddock feeding success and turbulent dissipation in a stratified water column. Observed feeding ratios (mean no. prey larval gut -1) for three size classes of larvae were compared with estimated ingestion rates using the Rothschild and Osborn ( Journal of Plankton Research, 10, 1988, 465-474) predator-prey encounter rate model. Simulation of contact rates requires parameter estimates of larval fish and their prey cruising speeds, density of prey, and turbulent velocity of the water column. Turbulent dissipation was estimated from a formulation by James ( Estuarine and Coastal Marine Science, 5, 1977, 339-353) incorporating both a wind a tidal component. Larval ingestion rates were based on swallowing probabilities derived from calm-water laboratory observations. Model-predicted turbulence profiles generally showed that dissipation rates were low to moderate (10 -11-10 -7 W kg -1). Turbulence was minimal at or below the pycnocline (≈ 25 m) with higher values(1-2 orders of magnitude) near the surface due to wind mixing and at depth due to shear in the tidal current near bottom. In a stratified water column during the day, first-feeding larvae (5-6 mm) were located mostly within or above the pycnocline coincident with their copepod prey (nauplii and copepodites). The 7-8 mm larvae were most abundant within the pycnocline, whereas the 9-10 mm larvae were found within and below the pycnocline. Feeding ratios were relatively low in early morning following darkness when the wind speed was low, but increased by a factor of 2-13 by noon and evening when the wind speed doubled. Comparison of depth-specific feeding ratios with estimated ingestion rates, derived from turbulence-affected contact rates, generally were reasonable after allowing for an average gut evacuation time (4 h), and in many cases the observed and estimated values had similar profiles. However, differences in vertical profiles may be attributed to differential digestion time, pursuit behavior affected by high turbulence, vertical migration of the larger larvae, an optimum light level for feeding, smaller-scale prey patchiness, and the gross estimates of turbulence. Response-surface estimation of averaged feeding ratios as a function of averaged prey density (0-50 m) with a minimum water-column turbulence value predicted that 5-6 mm larvae have a maximum feeding response at the highest prey densities (> 30 prey 1 -1) and lower turbulence estimates (<10 -10 W kg -1). The 7-8 mm and 9-10 mm larvae also have a maximum feeding response at high prey densities and low turbulence, but it extends to lower prey densities (> 10 prey 1 -1) as turbulence increases to intermidiate levels, clearly showing an interaction effect. In general, maximum feeding ratios occur at low to intermediate levels of turbulence where average prey density is greater than 10-20 prey 1 -1.
Drilling of CFRP and GFRP composite laminates using one shot solid carbide step drill K44
NASA Astrophysics Data System (ADS)
Nagaraja, R.; Rangaswamy, T.
2018-04-01
Drilling is a very common machining operation to install fasteners for assembly of laminates Drilling of Carbon Fiber Reinforced Plastic (CFRP) and Glass Fiber Reinforced Plastic (GFRP) composite laminate materials are different from that of convention materials that causes excessive tool wear and edge delamination. This paper reports on the tool geometry, cutting speed and feed rate. In this work two composite materials CFRP-G926 and Glass-7781 composite materials of varying thickness are drilled to investigate the effect of feed rate, and cutting speed. The study mainly focused on drilling laminates specimen of varying thickness 9 mm, 9.6 mm and 12 mm by using a single shot solid carbide step drill K44. The drilling is performed from lower to higher feed rate and cutting speed to investigate the hole quality, bottom top edge delamination, fiber breakages and local cracks. The work performed shows that a proper combination of tool geometry, cutting speed and feed rate can help to reduce the occurrence of delamination.
This issue paper explains when and how to apply first-order attenuation rate constant calculations in monitored natural attenuation (MNA) studies. First-order attenuation rate constant calculations can be an important tool for evaluating natural attenuation processes at ground-wa...
A focused ethnographic assessment of Middle Eastern mothers' infant feeding practices in Canada.
Jessri, Mahsa; Farmer, Anna P; Olson, Karin
2015-10-01
The aim of this study was to examine the barriers to following complementary feeding guidelines among Middle Eastern mothers and the cultural considerations of practitioners from an emic perspective. This is a two-phase focused ethnographic assessment of infant feeding among 22 Middle Eastern mothers in Western Canada who had healthy infants aged <1 year. Data were collected through four focus groups conducted in Arabic/Farsi, and were further complemented by comprehensive survey data collected in the second phase of study. Mothers' main criterion for choosing infant foods was whether or not foods were Halal, while food allergens were not causes for concern. Vitamin D supplements were not fed to 18/22 of infants, and mashed dates (Halawi), rice pudding (Muhallabia/Ferni) and sugared water/tea were the first complementary foods commonly consumed. Through constant comparison of qualitative data, three layers of influence emerged, which described mothers' process of infant feeding: socio-cultural, health care system and personal factors. Culture was an umbrella theme influencing all aspects of infant feeding decisions. Mothers cited health care professionals' lack of cultural considerations and lack of relevance and practicality of infant feeding guidelines as the main reasons for ignoring infant feeding recommendations. Early introduction of pre-lacteal feeds and inappropriate types of foods fed to infants among immigrant/refugee Middle Eastern mothers in Canada is cause of concern. Involving trained language interpreters in health teams and educating health care staff on cultural competency may potentially increase maternal trust in the health care system and eventually lead to increased awareness of and adherence to best practices with infant feeding recommendations. © 2013 John Wiley & Sons Ltd.
NASA Astrophysics Data System (ADS)
Osborne, David; Lawson, Patrick Andrew; Adams, Nigel; Dotan, Itzhak
2014-06-01
An in-depth study of the effects of functional group substitution on benzene's electron-ion dissociative recombination (e-IDR) rate constant has been conducted. The e-IDR rate constants for benzene, biphenyl, toluene, ethylbenzene, anisole, phenol, and aniline have been measured using a Flowing Afterglow equipped with an electrostatic Langmuir probe (FALP). These measurements have been made over a series of temperatures from 300 to 550 K. A relationship between the Hammett σpara values for each compound and rate constant has indicated a trend in the e-IDR rate constants and possibly in their temperature dependence data. The Hammett σpara value is a method to describe the effect a functional group substituted to a benzene ring has upon the reaction rate constant.
Hunt, Louise; Thomson, Gill
2017-04-01
Lack of support is reported as a key reason for early breastfeeding cessation. While breastfeeding peer support (BPS) is a recommended intervention to increase breastfeeding rates, a number of studies identify that engagement with BPS is problematic. Due to paucity of research in this area, this study explores why breastfeeding women do not access BPS in South-West England. Utilising a constructionist grounded theory approach, 33 participants (women (n = 13), health professionals (n = 6) and peer supporters (n = 14)) participated in a semi-structured interview (n = 22) or focus group (n = 11). Analysis involved open coding, constant comparisons and focussed coding. One core category and three main themes explicating non-access were identified. The core category concerns women's experiences of pressure and judgement around their feeding decisions within a dichotomous landscape of infant feeding language and support. Theme one, 'place and space of support', describes the contrast between perceived pressure to breastfeed and a lack of adequate and appropriate support. Theme two, 'one way or no way', outlines the rules-based approach to breastfeeding adopted by some health professionals and how women avoided BPS due to anticipating a similar approach. Theme three, 'it must be me', concerns how lack of embodied insights could lead to 'breastfeeding failure' identities. A background of dichotomised language, pressure and moral judgement, combined with the organisation of post-natal care and the model of breastfeeding adopted by health professionals, may inhibit women's access to BPS. A socio-cultural model of breastfeeding support providing clear messages regarding the value and purpose of BPS should be adopted. © 2016 John Wiley & Sons Ltd.
Effect of a High-Protein Diet on Kidney Function in Healthy Adults: Results From the OmniHeart Trial
Juraschek, Stephen P.; Appel, Lawrence J.; Anderson, Cheryl A.M.; Miller, Edgar R.
2013-01-01
Background Consumption of a diet high in protein can cause glomerular hyperfiltration, a potentially maladaptive response, which may accelerate the progression of kidney disease. Study Design An ancillary study of the OmniHeart trial, a randomized 3-period crossover feeding trial testing the effects of partial replacement of carbohydrate with protein on kidney function. Setting & Participants Healthy adults (N=164) with prehypertension or stage 1 hypertension at a community-based research clinic with a metabolic kitchen. Intervention Participants were fed each of 3 diets for 6 weeks. Feeding periods were separated by a 2- to 4-week washout period. Weight was held constant on each diet. The 3 diets emphasized carbohydrate, protein, or unsaturated fat; dietary protein was either 15% (carbohydrate and unsaturated fat diets) or 25% (protein diet) of energy intake. Outcomes Fasting serum creatinine, cystatin C, and β2-microglobulin levels, estimated glomerular filtration rate (eGFR). Measurements Serum creatinine, cystatin C, and β2-microglobulin collected at the end of each feeding period. Results Baseline cystatin C-based eGFR was 92.0±16.3 (SD) mL/min/1.73 m2. Compared with the carbohydrate and unsaturated fat diets, the protein diet increased cystatin C-based eGFR by ~4 mL/min/1.73 m2 (P < 0.001). The effects of the protein diet on kidney function were independent of changes in blood pressure. There was no significant difference between the carbohydrate and unsaturated fat diets. Limitations Participants did not have kidney disease at baseline. Conclusions A healthy diet rich in protein increased eGFR. Whether long-term consumption of a high-protein diet leads to kidney disease is uncertain. PMID:23219108
The impact of frequency on the performance of microwave ablation.
Sawicki, James F; Shea, Jacob D; Behdad, Nader; Hagness, Susan C
2017-02-01
The use of higher frequencies in percutaneous microwave ablation (MWA) may offer compelling interstitial antenna design advantages over the 915 MHz and 2.45 GHz frequencies typically employed in current systems. To evaluate the impact of higher frequencies on ablation performance, we conducted a comprehensive computational and experimental study of microwave absorption and tissue heating as a function of frequency. We performed electromagnetic and thermal simulations of MWA in ex vivo and in vivo porcine muscle at discrete frequencies in the 1.9-26 GHz range. Ex vivo ablation experiments were performed in the 1.9-18 GHz range. We tracked the size of the ablation zone across frequency for constant input power and ablation duration. Further, we conducted simulations to investigate antenna feed line heating as a function of frequency, input power, and cable diameter. As the frequency was increased from 1.9 to 26 GHz the resulting ablation zone dimensions decreased in the longitudinal direction while remaining relatively constant in the radial direction; thus at higher frequencies the overall ablation zone was more spherical. However, cable heating at higher frequencies became more problematic for smaller diameter cables at constant input power. Comparably sized ablation zones are achievable well above 1.9 GHz, despite increasingly localised power absorption. Specific absorption rate alone does not accurately predict ablation performance, particularly at higher frequencies where thermal diffusion plays an important role. Cable heating due to ohmic losses at higher frequencies may be controlled through judicious choices of input power and cable diameter.
NASA Astrophysics Data System (ADS)
Lee, D. B.; Jerolmack, D. J.
2017-12-01
Bed-load transport is notoriously unpredictable, in part due to stochastic fluctuations in grain entrainment and deposition. A general statistical mechanical framework has been proposed by Furbish and colleagues to formally derive average bed-load flux from grain-scale motion, and its application requires an intimate understanding of the probabilistic motion of individual grains. Recent work by Ancey et al. suggests that, near threshold, particles are entrained collectively. If so, understanding the scales of correlation is a necessary step to complete the probabilistic framework describing bed-load flux. We perform a series of experiments in a steep-sloped channel that directly quantifies fluctuations in grain motion as a function of the feed rate of particles (marbles). As the feed rate is increased, the necessary averaging time is decreased (i.e. transport grows less variable in time). Collective grain motion is defined as spatially clustered movement of several grains at once. We find that entrainment of particles is generally collective, but that these entrained particles deposit independently of each other. The size distribution of collective motion events follows an exponential decay that is consistent across sediment feed rates. To first order, changing feed rate does not change the kinematics of mobile grains, just the frequency of motion. For transport within a given region of the bed, we show that the total displacement of all entrained grains is proportional to the kinetic energy deposited into the bed by impacting grains. Individual grain-bed impacts are the likely cause of both collective and individual grain entrainment. The picture that emerges is similar to generic avalanching dynamics in sandpiles: "avalanches" (collective entrainment events) of a characteristic size relax with a characteristic timescale regardless of feed rate, but the frequency of avalanches increases in proportion to the feed rate. At high enough feed rates the avalanches merge, leading to progressively smoother and continuous transport. As most bed-load transport occurs in the intermittent regime, the length scale of collective entrainment should be considered a fundamental addition to a probabilistic framework that hopes to infer flux from grain motion.
Equilibrium muscle cross-bridge behavior. Theoretical considerations.
Schoenberg, M
1985-01-01
We have developed a model for the equilibrium attachment and detachment of myosin cross-bridges to actin that takes into account the possibility that a given cross-bridge can bind to one of a number of actin monomers, as seems likely, rather than to a site on only a single actin monomer, as is often assumed. The behavior of this multiple site model in response to constant velocity, as well as instantaneous stretches, was studied and the influence of system parameters on the force response explored. It was found that in the multiple site model the detachment rate constant has considerably greater influence on the mechanical response than the attachment rate constant. It is shown that one can obtain information about the detachment rate constants either by examining the relationship between the apparent stiffness and duration of stretch for constant velocity stretches or by examining the force-decay rate constants following an instantaneous stretch. The main effect of the attachment rate constant is to scale the mechanical response by influencing the number of attached cross-bridges. The significance of the modeling for the interpretation of experimental results is discussed. PMID:4041539
Code of Federal Regulations, 2010 CFR
2010-04-01
... of feed; plus oxytetracycline, 10 milligrams per pound of body weight. (i) Indications for use. For... oxytetracycline, for treatment of bacterial pneumonia caused by Pasteurella multocida susceptible to oxytetracycline; and for increased rate of weight gain and improved feed efficiency. (ii) Limitations. Feed...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Osborne, David; Lawson, Patrick; Adams, Nigel, E-mail: ngadams@uga.edu
Following the arrival of Cassini at Titan in 2004, the Titan atmosphere has been shown to contain large complex polycyclic-aromatic hydrocarbons. Since Cassini has provided a great deal of data, there exists a need for kinetic rate data to help with modeling this atmosphere. One type of kinetic data needed is electron-ion dissociative recombination (e-IDR) rate constants. These data are not readily available for larger compounds, such as naphthalene, or oxygen containing compounds, such as 1,4 dioxane or furan. Here, the rate constants for naphthalene, 1,4 dioxane, and furan have been measured and their temperature dependencies are determined when possible,more » using the University of Georgia's Variable Temperature Flowing Afterglow. The rate constants are compared with those previously published for other compounds; these show trends which illustrate the effects which multi-rings and oxygen heteroatoms substitutions have upon e-IDR rate constants.« less
NASA Astrophysics Data System (ADS)
Osborne, David; Lawson, Patrick; Adams, Nigel
2014-01-01
Following the arrival of Cassini at Titan in 2004, the Titan atmosphere has been shown to contain large complex polycyclic-aromatic hydrocarbons. Since Cassini has provided a great deal of data, there exists a need for kinetic rate data to help with modeling this atmosphere. One type of kinetic data needed is electron-ion dissociative recombination (e-IDR) rate constants. These data are not readily available for larger compounds, such as naphthalene, or oxygen containing compounds, such as 1,4 dioxane or furan. Here, the rate constants for naphthalene, 1,4 dioxane, and furan have been measured and their temperature dependencies are determined when possible, using the University of Georgia's Variable Temperature Flowing Afterglow. The rate constants are compared with those previously published for other compounds; these show trends which illustrate the effects which multi-rings and oxygen heteroatoms substitutions have upon e-IDR rate constants.
Recycling of rare earth particle by mini-hydrocyclones.
Yu, Jian-Feng; Fu, Jian; Cheng, Hao; Cui, Zhengwei
2017-03-01
Mini-hydrocyclones were applied to separate the fine rare earth particles from the suspensions. The effects of the flow rate, split ratio, and feed concentration on the total separation efficiency and grade separation efficiency were studied. The combined effects of the flow rate (1200-1600L/h), split ratio (20-60%) and concentration (0.6-1.0wt%) on the total separation efficiency in mini-hydrocyclones were investigated using a response surface methodology. The optimum operating parameters for a total separation efficiency of 92.5% were: feed flow rate=1406L/h, split ratio=20%, and feed concentration=1wt%. Copyright © 2016 Elsevier Ltd. All rights reserved.
NASA Astrophysics Data System (ADS)
Wen, Zhang; Zhan, Hongbin; Wang, Quanrong; Liang, Xing; Ma, Teng; Chen, Chen
2017-05-01
Actual field pumping tests often involve variable pumping rates which cannot be handled by the classical constant-rate or constant-head test models, and often require a convolution process to interpret the test data. In this study, we proposed a semi-analytical model considering an exponentially decreasing pumping rate started at a certain (higher) rate and eventually stabilized at a certain (lower) rate for cases with or without wellbore storage. A striking new feature of the pumping test with an exponentially decayed rate is that the drawdowns will decrease over a certain period of time during intermediate pumping stage, which has never been seen before in constant-rate or constant-head pumping tests. It was found that the drawdown-time curve associated with an exponentially decayed pumping rate function was bounded by two asymptotic curves of the constant-rate tests with rates equaling to the starting and stabilizing rates, respectively. The wellbore storage must be considered for a pumping test without an observation well (single-well test). Based on such characteristics of the time-drawdown curve, we developed a new method to estimate the aquifer parameters by using the genetic algorithm.
NASA Astrophysics Data System (ADS)
Vallina, S. M.; Ward, B. A.; Dutkiewicz, S.; Follows, M. J.
2014-01-01
Predators' switching towards the most abundant prey is a mechanism that stabilizes population dynamics and helps overcome competitive exclusion of species in food webs. Current formulations of active prey-switching, however, display non-maximal feeding in which the predators' total ingestion decays exponentially with the number prey species (i.e. the diet breadth) even though the total prey biomass stays constant. We analyse three previously published multi-species functional responses which have either active switching or maximal feeding, but not both. We identify the cause of this apparent incompatibility and describe a kill-the-winner formulation that combines active switching with maximal feeding. Active switching is shown to be a community response in which some predators become prey-selective and the formulations with maximal or non-maximal feeding are implicitly assuming different food web configurations. Global simulations using a marine ecosystem model with 64 phytoplankton species belonging to 4 major functional groups show that the species richness and biogeography of phytoplankton are very sensitive to the choice of the functional response for grazing. The phytoplankton biogeography reflects the balance between the competitive abilities for nutrient uptake and the degree of apparent competition which occurs indirectly between species that share a common predator species. The phytoplankton diversity significantly increases when active switching is combined with maximal feeding through predator-mediated coexistence.
de Roos, André M; Persson, Lennart
2003-02-01
In this paper we investigate the consequences of size-dependent competition among the individuals of a consumer population by analyzing the dynamic properties of a physiologically structured population model. Only 2 size-classes of individuals are distinguished: juveniles and adults. Juveniles and adults both feed on one and the same resource and hence interact by means of exploitative competition. Juvenile individuals allocate all assimilated energy into development and mature on reaching a fixed developmental threshold. The combination of this fixed threshold and the resource-dependent developmental rate, implies that the juvenile delay between birth and the onset of reproduction may vary in time. Adult individuals allocate all assimilated energy to reproduction. Mortality of both juveniles and adults is assumed to be inversely proportional to the amount of energy assimilated. In this setting we study how the dynamics of the population are influenced by the relative foraging capabilities of juveniles and adults. In line with results that we previously obtained in size-structured consumer-resource models with pulsed reproduction, population cycles primarily occur when either juveniles or adults have a distinct competitive advantage. When adults have a larger per capita feeding rate and are hence competitively superior to juveniles, population oscillations occur that are primarily induced by the fact that the duration of the juvenile period changes with changing food conditions. These cycles do not occur when the juvenile delay is a fixed parameter. When juveniles are competitively superior, two different types of population fluctuations can occur: (1) rapid, low-amplitude fluctuations having a period of half the juvenile delay and (2) slow, large-amplitude fluctuations characterized by a period, which is roughly equal to the juvenile delay. The analysis of simplified versions of the structured model indicates that these two types of oscillations also occur if mortality and/or development is independent of food density, i.e. in a situation with a constant juvenile developmental delay and a constant, food-independent background mortality. Thus, the oscillations that occur when juveniles are more competitive are induced by the juvenile delay per se. When juveniles exert a larger foraging pressure on the shared resource, maturation implies an increase not only in adult density, but also in food density and consequently fecundity. Our analysis suggests that this correlation in time between adult density and fecundity is crucial for the occurrence of population cycles when juveniles are competitively superior.
NASA Astrophysics Data System (ADS)
Newsome, Ben; Evans, Mat
2017-12-01
Chemical rate constants determine the composition of the atmosphere and how this composition has changed over time. They are central to our understanding of climate change and air quality degradation. Atmospheric chemistry models, whether online or offline, box, regional or global, use these rate constants. Expert panels evaluate laboratory measurements, making recommendations for the rate constants that should be used. This results in very similar or identical rate constants being used by all models. The inherent uncertainties in these recommendations are, in general, therefore ignored. We explore the impact of these uncertainties on the composition of the troposphere using the GEOS-Chem chemistry transport model. Based on the Jet Propulsion Laboratory (JPL) and International Union of Pure and Applied Chemistry (IUPAC) evaluations we assess the influence of 50 mainly inorganic rate constants and 10 photolysis rates on tropospheric composition through the use of the GEOS-Chem chemistry transport model. We assess the impact on four standard metrics: annual mean tropospheric ozone burden, surface ozone and tropospheric OH concentrations, and tropospheric methane lifetime. Uncertainty in the rate constants for NO2 + OH →M HNO3 and O3 + NO → NO2 + O2 are the two largest sources of uncertainty in these metrics. The absolute magnitude of the change in the metrics is similar if rate constants are increased or decreased by their σ values. We investigate two methods of assessing these uncertainties, addition in quadrature and a Monte Carlo approach, and conclude they give similar outcomes. Combining the uncertainties across the 60 reactions gives overall uncertainties on the annual mean tropospheric ozone burden, surface ozone and tropospheric OH concentrations, and tropospheric methane lifetime of 10, 11, 16 and 16 %, respectively. These are larger than the spread between models in recent model intercomparisons. Remote regions such as the tropics, poles and upper troposphere are most uncertain. This chemical uncertainty is sufficiently large to suggest that rate constant uncertainty should be considered alongside other processes when model results disagree with measurement. Calculations for the pre-industrial simulation allow a tropospheric ozone radiative forcing to be calculated of 0.412 ± 0.062 W m-2. This uncertainty (13 %) is comparable to the inter-model spread in ozone radiative forcing found in previous model-model intercomparison studies where the rate constants used in the models are all identical or very similar. Thus, the uncertainty of tropospheric ozone radiative forcing should expanded to include this additional source of uncertainty. These rate constant uncertainties are significant and suggest that refinement of supposedly well-known chemical rate constants should be considered alongside other improvements to enhance our understanding of atmospheric processes.
Lee, C; Araujo, R C; Koenig, K M; Beauchemin, K A
2015-10-01
The objective of the study was to investigate the effects of feed consumption rate on potential toxicity, rumen fermentation, and eating behavior when beef heifers were fed a diet supplemented with nitrate (NI). Twelve ruminally cannulated heifers (827 ± 65.5 kg BW) were used in a randomized complete block design. The experiment consisted of 10-d adaptation, 8-d urea-feeding, and 3-d nitrate-feeding periods. All heifers were fed a diet supplemented with urea (UR) during the adaptation and urea-feeding periods, whereas the NI diet (1.09% NO in dietary DM) was fed during the nitrate-feeding period. After adaptation, heifers were randomly assigned to ad libitum or restrictive feeding (about 80% of ad libitum intake) for the urea- and nitrate-feeding periods. Ad libitum DMI decreased (14.1 vs. 15.1 kg/d; < 0.01) when heifers were fed the NI diet compared with the UR diet. The amount of feed consumed increased ( < 0.01) at 0 to 3 h and decreased ( ≤ 0.03) at 3 to 24 h for restrictive vs. ad libitum feeding of both the UR and NI diets. Compared to the UR diet, the NI diet decreased ( < 0.01) feed consumption at 0 to 3 h and increased ( < 0.02) feed consumption at 3 to 24 h (except feed consumption at 9 to 12 h; = 0.90), indicating nitrate feeding changed the consumption pattern (a more even distribution of feed intake over the day). The increased feed consumption from 0 to 3 h after feeding the NI diet restrictively vs. ad libitum numerically decreased ( = 0.11) rumen pH and numerically or significantly increased ( = 0.01 to 0.28) rumen ammonia, NO, and NO; blood methemoglobin; and plasma NO and NO at 3 h. Regression analysis indicated that increased feed consumption (0 to 3 h) exponentially elevated ( < 0.01; = 0.75) blood methemoglobin, and plasma NO + NO among other rumen and blood variables had the greatest correlation (sigmoid response; < 0.01, = 0.47) with feed consumption (0 to 3 h). Particle size distribution of orts was partially altered ( = 0.02 to 0.40) when the NI diet was fed compared with the UR diet. During the nitrate-feeding period, the nitrate content of orts on d 2 and 3 was greater ( = 0.02) than that on d 1. In conclusion, the increased consumption rate of a diet supplemented with nitrate was an important factor influencing risk of nitrate toxicity based on blood methemoglobin and plasma NO. In addition, the pattern of daily feed consumption was altered by nitrate (creating a "nibbling" pattern of eating) in beef heifers.
Eleazu, C O; Iroaganachi, M; Eleazu, K C
2013-01-01
To investigate the ameliorating potentials of cocoyam (Colocasia esculenta L.) and unripe plantain (Musa paradisiaca L.) incorporated feeds on the renal and liver growths of diabetic rats, induced with 55 and 65 mg/kg body weight of Streptozotocin. The blood glucose level of the rats was measured with a glucometer, the protein and glucose and specific gravity (SPGR) in the urine samples of the rats were measured using urine assay strips and urinometer respectively. The chemical composition and antioxidant screening of the test feeds were carried out using standard techniques. Administration of the test feeds for 21 days to the diabetic rats of groups 4 and 5, resulted in 58.75% and 38.13% decreases in hyperglycemia and amelioration of their elevated urinary protein, glucose, SPGR, and relative kidney weights. The diabetic rats administered cocoyam incorporated feeds, had 2.71% and 19.52% increases in weight and growth rates, the diabetic rats administered unripe plantain incorporated feeds had 5.12% and 29.52% decreases in weight and growth rates while the diabetic control rats had 28.69%, 29.46%, 248.9% and 250.14% decreases in weights and growth rates. The cocoyam incorporated feeds contained higher antioxidants, minerals and phytochemicals except alkaloids than unripe plantain feed. Cocoyam and unripe plantain could be useful in the management of diabetic nephropathy.
Oral support measures used in feeding the preterm infant.
Hill, A S; Kurkowski, T B; Garcia, J
2000-01-01
Evidence that bottle-feeding is a stressor for inefficient preterm infant feeders is seen in untoward changes in the physiologic system and nutritive sucking patterns. To determine whether a therapeutic technique, oral support (cheek and jaw support), would influence the cardiopulmonary functions or nutritive sucking patterns of preterm infants during feeding. A crossover repeated measures design was used with 20 preterm infants for a total of 40 bottle-feeding sessions. The Whitney Mercury Strain Gage and a Nonin Cardiopulmonary monitor were used to observe sucking characteristics and cardiopulmonary functions during feeding. Infants not receiving support paused longer (F= 6.37, df= 5, p < .001) and more frequently (F= 5.01, df= 5, p < .001) than supported infants. There were no differences between the groups in the number of sucks and bursts, the burst duration, the stability of the total sucking activity, or the rate of sucking. Oxygen saturation (SaO2) values, heart rate, and respiratory rate did not differ between the groups during feeding. Postfeeding SaO2 levels were lower than prefeeding levels for infants not receiving oral support (t= 0.96, df= 19, p= .03). Oral support provided stability for the jaw and fostered the return of the infant's prefeeding SaO2 values, but it did not interfere with cardiopulmonary function during feeding. Further research is needed to determine whether there is a cumulative effect of oral support, and whether it influences state behavior.
Allison, Thomas C
2016-03-03
Rate constants for reactions of chemical compounds with hydroxyl radical are a key quantity used in evaluating the global warming potential of a substance. Experimental determination of these rate constants is essential, but it can also be difficult and time-consuming to produce. High-level quantum chemistry predictions of the rate constant can suffer from the same issues. Therefore, it is valuable to devise estimation schemes that can give reasonable results on a variety of chemical compounds. In this article, the construction and training of an artificial neural network (ANN) for the prediction of rate constants at 298 K for reactions of hydroxyl radical with a diverse set of molecules is described. Input to the ANN consists of counts of the chemical bonds and bends present in the target molecule. The ANN is trained using 792 (•)OH reaction rate constants taken from the NIST Chemical Kinetics Database. The mean unsigned percent error (MUPE) for the training set is 12%, and the MUPE of the testing set is 51%. It is shown that the present methodology yields rate constants of reasonable accuracy for a diverse set of inputs. The results are compared to high-quality literature values and to another estimation scheme. This ANN methodology is expected to be of use in a wide range of applications for which (•)OH reaction rate constants are required. The model uses only information that can be gathered from a 2D representation of the molecule, making the present approach particularly appealing, especially for screening applications.
Bland, Ruth M; Little, Kirsty E; Coovadia, Hoosen M; Coutsoudis, Anna; Rollins, Nigel C; Newell, Marie-Louise
2008-04-23
We report on a nonrandomized intervention cohort study to increase exclusive breast-feeding rates for 6 months after delivery in HIV-positive and HIV-negative women in KwaZulu-Natal, South Africa. Lay counselors visited women to support exclusive breast-feeding: four times antenatally, four times in the first 2 weeks postpartum and then fortnightly to 6 months. Daily feeding practices were collected at weekly intervals by separate field workers. Cumulative exclusive breast-feeding rates from birth were assessed by Kaplan-Meier analysis and association with maternal and infant variables was quantified in a Cox regression analysis. One thousand, two hundred and nineteen infants of HIV-negative and 1217 infants of HIV-positive women were followed postnatally. Median duration of exclusive breast-feeding was 177 (R = 1-180; interquartile range: 150-180) and 175 days (R = 1-180; interquartile range: 137-180) in HIV-negative and HIV-positive women, respectively. Using 24-h recall, exclusive breast-feeding rates at 3 and 5 months were 83.1 and 76.5%, respectively, in HIV-negative women and 72.5 and 66.7%, respectively, in HIV-positive women. Using the most stringent cumulative data, 45% of HIV-negative and 40% of HIV-positive women adhered to exclusive breast-feeding for 6 months. Counseling visits were strongly associated with adherence to cumulative exclusive breast-feeding at 4 months, those who had received the scheduled number of visits were more than twice as likely to still be exclusively breast-feeding than those who had not (HIV-negative women: adjusted odds ratio: 2.07, 95% confidence interval: 1.56-2.74, P < 0.0001; HIV-positive women: adjusted odds ratio: 2.86, 95% CI 2.13-3.83, P < 0.0001). It is feasible to promote and sustain exclusive breast-feeding for 6 months in both HIV-positive and HIV-negative women, with home support from well trained lay counselors.
USDA-ARS?s Scientific Manuscript database
Plant defense responses against insect herbivores frequently depend on the biosynthesis and action of jasmonic acid (JA) and its conjugates. To better understand JA signaling pathways in maize (Zea mays L.), we have examined two maize genotypes, Mp708 and Tx601. Mp708 is resistant to feeding by le...
Going off the Grid: Re-Examining Technology in the Basic Writing Classroom
ERIC Educational Resources Information Center
Clay-Buck, Holly; Tuberville, Brenda
2015-01-01
The notion that today's students are constantly exposed to information technology has become so pervasive that it seems the academic conversation assumes students are "tech savvy." The proliferation of apps and smart phones aimed at the traditional college-aged population feeds into this assumption, aided in no small part by a growing…
A Computational Framework for Analyzing Stochasticity in Gene Expression
Sherman, Marc S.; Cohen, Barak A.
2014-01-01
Stochastic fluctuations in gene expression give rise to distributions of protein levels across cell populations. Despite a mounting number of theoretical models explaining stochasticity in protein expression, we lack a robust, efficient, assumption-free approach for inferring the molecular mechanisms that underlie the shape of protein distributions. Here we propose a method for inferring sets of biochemical rate constants that govern chromatin modification, transcription, translation, and RNA and protein degradation from stochasticity in protein expression. We asked whether the rates of these underlying processes can be estimated accurately from protein expression distributions, in the absence of any limiting assumptions. To do this, we (1) derived analytical solutions for the first four moments of the protein distribution, (2) found that these four moments completely capture the shape of protein distributions, and (3) developed an efficient algorithm for inferring gene expression rate constants from the moments of protein distributions. Using this algorithm we find that most protein distributions are consistent with a large number of different biochemical rate constant sets. Despite this degeneracy, the solution space of rate constants almost always informs on underlying mechanism. For example, we distinguish between regimes where transcriptional bursting occurs from regimes reflecting constitutive transcript production. Our method agrees with the current standard approach, and in the restrictive regime where the standard method operates, also identifies rate constants not previously obtainable. Even without making any assumptions we obtain estimates of individual biochemical rate constants, or meaningful ratios of rate constants, in 91% of tested cases. In some cases our method identified all of the underlying rate constants. The framework developed here will be a powerful tool for deducing the contributions of particular molecular mechanisms to specific patterns of gene expression. PMID:24811315
Class Projects in Physical Organic Chemistry: The Hydrolysis of Aspirin
ERIC Educational Resources Information Center
Marrs, Peter S.
2004-01-01
An exercise that provides a hands-on demonstration of the hydrolysis of aspirin is presented. The key to understanding the hydrolysis is recognizing that all six process may occur simultaneously and that the observed rate constant is the sum of the rate constants that one rate constant dominates the overall process.
Haghighatafshar, Salar; Ossiansson, Elin; Koch, Konrad; Kjerstadius, Hamse; Jansen, Jes la Cour; Davidsson, Åsa
2015-07-01
Hydrolysis constants of mixed sludge at 35, 55, and 60 °C were found to be 0.32, 0.44, and 0.50 1/d, respectively, in pilot-scale, semicontinuously operated anaerobic digesters. The hydrolysis constants and estimated chemical oxygen demand fractions in the feed were introduced to a mathematical model for anaerobic digestion published by Siegrist et al. (2002), which is similar to Anaerobic Digestion Model No. 1. First-order and Monod-type kinetics were tested for estimation of hydrolysis constants. The applied kinetics were found to affect the outcome of the regression study. Moreover, the free ammonia inhibition model was excluded for both propionate oxidation and acetate conversion, thanks to the apparent acclimatized biomass. No substantial accumulation of volatile fatty acids was observed in the reactors at 35, 55, and 60 °C, corresponding to free ammonia nitrogen concentrations of about 20, 110, and 130 g N/m³, respectively.
Siddiqui, A; Lehmann, S; Bucs, Sz S; Fresquet, M; Fel, L; Prest, E I E C; Ogier, J; Schellenberg, C; van Loosdrecht, M C M; Kruithof, J C; Vrouwenvelder, J S
2017-03-01
Feed spacers are an essential part of spiral-wound reverse osmosis (RO) and nanofiltration (NF) membrane modules. Geometric modification of feed spacers is a potential option to reduce the impact of biofouling on the performance of membrane systems. The objective of this study was to evaluate the biofouling potential of two commercially available reference feed spacers and four modified feed spacers. The spacers were compared on hydraulic characterization and in biofouling studies with membrane fouling simulators (MFSs). The virgin feed spacer was characterized hydraulically by their resistance, measured in terms of feed channel pressure drop, performed by operating MFSs at varying feed water flow rates. Short-term (9 days) biofouling studies were carried out with nutrient dosage to the MFS feed water to accelerate the biofouling rate. Long-term (96 days) biofouling studies were done without nutrient dosage to the MFS feed water. Feed channel pressure drop was monitored and accumulation of active biomass was quantified by adenosine tri phosphate (ATP) determination. The six feed spacers were ranked on pressure drop (hydraulic characterization) and on biofouling impact (biofouling studies). Significantly different trends in hydraulic resistance and biofouling impact for the six feed spacers were observed. The same ranking for biofouling impact on the feed spacers was found for the (i) short-term biofouling study with nutrient dosage and the (ii) long-term biofouling study without nutrient dosage. The ranking for hydraulic resistance for six virgin feed spacers differed significantly from the ranking of the biofouling impact, indicating that hydraulic resistance of clean feed spacers does not predict the hydraulic resistance of biofouled feed spacers. Better geometric design of feed spacers can be a suitable approach to minimize impact of biofouling in spiral wound membrane systems. Copyright © 2016 Elsevier Ltd. All rights reserved.
and feed forward stabilization) have been implemented. An on-mount gyro system consists of gyroscopes mounted on the radar antenna which sense...antenna motion and send compensating signals back to the antenna servo mechanism. Feed forward stabilization consists of determining antenna angular rates...caused by ships attitude changes, as measured by a stable platform (such as SINS), and feeding compensating signals back to the antenna servo
Harrington, D W J; Guy, J H; Robinson, K; Sparagano, O A E
2010-04-01
Although artificial feeding models for the poultry red mite (Dermanyssus gallinae) most frequently use biological membranes consisting of day-old chick skin, there are ethical considerations associated with the use of skin. The few studies reported in the literature that have investigated the use of synthetic membranes to feed D. gallinae in vitro have reported limited success. The current study describes an investigation into the use of synthetic membranes made from either Nescofilm or rayon and silicone, used either alone or in combination with different feather or skin extracts, as well as the use of capillary tubes. In all, 12 different treatments were used, and the feeding rate of D. gallinae was compared to that of day-old chick skin. Allowing mites to feed on a membrane consisting of Nescofilm with a skin extract resulted in the highest proportion of mites feeding (32.3%), which was not significantly different to the feeding rate of mites on day-old chick skin (38.8%). This study confirms that synthetic membranes can be used to feed D. gallinae artificially. Further optimization of the membrane and mite storage conditions is still necessary, but the study demonstrates a proof of concept.
NASA Astrophysics Data System (ADS)
Xie, Tiao; Bowman, Joel M.; Peterson, K. A.; Ramachandran, B.
2003-11-01
We report the thermal rate constant of the O(3P)+HCl→OH+Cl reaction calculated from 200 to 3200 K, using new fits to extensive ab initio calculations [B. Ramachandran and K. A. Peterson, J. Chem. Phys. 119, 9590 (2003), preceding paper]. The rate constants are obtained for both the 3A″ and 3A' surfaces using exact quantum reactive scattering calculations for selected values of the total angular momentum and the J-shifting approximation for both the 3A″ and 3A' surfaces. The results are compared with the ICVT/μOMT rate constants calculated by the POLYRATE program and all available experimental data. Other related high-energy reaction channels are also studied qualitatively for their contribution to the total thermal rate constant at high temperature.
NASA Technical Reports Server (NTRS)
Tromp, C.
1979-01-01
A windpowered generator system is described which uses a windmill to convert mechanical energy to electrical energy for a three phase (network) voltage of constant amplitude and frequency. The generator system controls the windmill by the number of revolutions so that the power drawn from the wind for a given wind velocity is maximum. A generator revolution which is proportional to wind velocity is achieved. The stator of the generator is linked directly to the network and a feed converter at the rotor takes care of constant voltage and frequency at the stator.
Inflation with a constant rate of roll
NASA Astrophysics Data System (ADS)
Motohashi, Hayato; Starobinsky, Alexei A.; Yokoyama, Jun'ichi
2015-09-01
We consider an inflationary scenario where the rate of inflaton roll defined by ̈phi/H dot phi remains constant. The rate of roll is small for slow-roll inflation, while a generic rate of roll leads to the interesting case of 'constant-roll' inflation. We find a general exact solution for the inflaton potential required for such inflaton behaviour. In this model, due to non-slow evolution of background, the would-be decaying mode of linear scalar (curvature) perturbations may not be neglected. It can even grow for some values of the model parameter, while the other mode always remains constant. However, this always occurs for unstable solutions which are not attractors for the given potential. The most interesting particular cases of constant-roll inflation remaining viable with the most recent observational data are quadratic hilltop inflation (with cutoff) and natural inflation (with an additional negative cosmological constant). In these cases even-order slow-roll parameters approach non-negligible constants while the odd ones are asymptotically vanishing in the quasi-de Sitter regime.
Schröder, Henning; Sawall, Mathias; Kubis, Christoph; Selent, Detlef; Hess, Dieter; Franke, Robert; Börner, Armin; Neymeyr, Klaus
2016-07-13
If for a chemical reaction with a known reaction mechanism the concentration profiles are accessible only for certain species, e.g. only for the main product, then often the reaction rate constants cannot uniquely be determined from the concentration data. This is a well-known fact which includes the so-called slow-fast ambiguity. This work combines the question of unique or non-unique reaction rate constants with factor analytic methods of chemometrics. The idea is to reduce the rotational ambiguity of pure component factorizations by considering only those concentration factors which are possible solutions of the kinetic equations for a properly adapted set of reaction rate constants. The resulting set of reaction rate constants corresponds to those solutions of the rate equations which appear as feasible factors in a pure component factorization. The new analysis of the ambiguity of reaction rate constants extends recent research activities on the Area of Feasible Solutions (AFS). The consistency with a given chemical reaction scheme is shown to be a valuable tool in order to reduce the AFS. The new methods are applied to model and experimental data. Copyright © 2016 Elsevier B.V. All rights reserved.
NASA Technical Reports Server (NTRS)
Hsu, K.-J.; DeMore, W. B.
1995-01-01
Rate constants and temperature dependencies for the reactions of OH with CF3OCH3 (HFOC-143a), CF2HOCF2H (HFOC-134), and CF3OCF2H (HFOC-125) were studied using a relative rate technique in the temperature range 298-393 K. The following absolute rate constants were derived: HFOC-143a, 1.9E-12 exp(-1555/T); HFOC-134, 1.9E-12 exp(-2006/T); HFOC-125, 4.7E-13 exp(-2095/T). Units are cm(exp 3)molecule(exp -1) s(exp -1). Substituent effects on OH abstraction rate constants are discussed, and it is shown that the CF3O group has an effect on the OH rate constants similar to that of a fluorine atom. The effects are related to changes in the C-H bond energies of the reactants (and thereby the activation energies) rather than changes in the preexponential factors. On the basis of a correlation of rate constants with bond energies, the respective D(C-H) bond strengths in the three ethers are found to be 102, 104, and 106 kcal/mol, with an uncertainty of about 1 kcal/mol.
Karimi Torshizi, M A; Moghaddam, A R; Rahimi, Sh; Mojgani, N
2010-04-01
1. Two routes of probiotic administration in broiler farms, in water and in feed, were compared using 360 one-day-old male broiler chickens. Controls received no probiotics or antimicrobials. The water group received a probiotic preparation at a rate of 0.5 g/l, and the feed group received it at an inclusion rate of 1 g/kg. 2. Performance of broilers in terms body weight gain (BWG), feed intake (FI) and feed conversion ratio (FCR) improved when probiotic was provided via drinking water, compared to the control and feed groups. Probiotic administration reduced plasma cholesterol and triglyceride concentrations. 3. Spleen (28 and 42 d) and bursa (42 d) relative weights were influenced by method of probiotic administration, which also improved T-cell dependent skin thickness response to phytohaemagglutinin (PHA) injection. The effect of challenge by dinitrochlorobenzene (DNCB) depended on the method of probiotic administration. 4. The method of probiotic administration can influence the performance and immune competence of birds, and administration via drinking water appears to be superior to the more conventional in-feed supplementation method.
Conversion of Nuclear Waste to Molten Glass: Cold-Cap Reactions in Crucible Tests
DOE Office of Scientific and Technical Information (OSTI.GOV)
Xu, Kai; Hrma, Pavel; Rice, Jarrett A.
2016-05-23
The feed-to-glass conversion, which comprises complex chemical reactions and phase transitions, occurs in the cold-cap zone during nuclear waste vitrification. Knowledge of the chemistry and physics of feed-to-glass conversion will help us control the conversion path by changing the melter feed makeup to maximize the glass production rate. To investigate the conversion process, we analyzed heat-treated samples of a simulated high-level waste feed using X-ray diffraction, electron probe microanalysis – wavelength dispersive X-ray spectroscopy, leaching tests, and residual anion analysis. Feed dehydration, gas evolution, and borate phase formation occurred at temperatures below 700 °C before the emerging glass-forming melt wasmore » completely connected. Above 800 °C, intermediate aluminosilicate phases and quartz particles were gradually dissolving in the continuous borosilicate melt, which expanded into transient foam. Knowledge of the chemistry and physics of feed-to-glass conversion will help us control the conversion path by changing the melter feed makeup to maximize the glass production rate.« less
Being baby friendly: evidence-based breastfeeding support.
Cleminson, J; Oddie, S; Renfrew, M J; McGuire, W
2015-03-01
Breast feeding improves important outcomes for mothers and infants. In the UK, breastfeeding rates have historically been low, particularly among socially disadvantaged young women. Although there have been gradual increases in breastfeeding initiation rates since 2000, rates of exclusive breast feeding and continuation until 6 months remain lower than those in similar countries. This review summarises the evidence for effective and cost-effective strategies to help women, particularly those in low income groups, make informed choices, overcome barriers and establish and maintain breast feeding. We describe the development and impact of the Unicef Baby Friendly Initiative, and the roles and responsibilities, and challenges and opportunities that clinicians have in promoting breast feeding and maintaining a baby-friendly culture and environment. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.
Yadav, Kunwar D; Tare, Vinod; Ahammed, M Mansoor
2011-06-01
The main objective of the present study was to determine the optimum stocking density for feed consumption rate, biomass growth and reproduction of earthworm Eisenia fetida as well as determining and characterising vermicompost quantity and product, respectively, during vermicomposting of source-separated human faeces. For this, a number of experiments spanning up to 3 months were conducted using soil and vermicompost as support materials. Stocking density in the range of 0.25-5.00 kg/m(2) was employed in different tests. The results showed that 0.40-0.45 kg-feed/kg-worm/day was the maximum feed consumption rate by E. fetida in human faeces. The optimum stocking densities were 3.00 kg/m(2) for bioconversion of human faeces to vermicompost, and 0.50 kg/m(2) for earthworm biomass growth and reproduction. Copyright © 2011 Elsevier Ltd. All rights reserved.
Multiple-stage decisions in a marine central-place forager
NASA Astrophysics Data System (ADS)
Friedlaender, Ari S.; Johnston, David W.; Tyson, Reny B.; Kaltenberg, Amanda; Goldbogen, Jeremy A.; Stimpert, Alison K.; Curtice, Corrie; Hazen, Elliott L.; Halpin, Patrick N.; Read, Andrew J.; Nowacek, Douglas P.
2016-05-01
Air-breathing marine animals face a complex set of physical challenges associated with diving that affect the decisions of how to optimize feeding. Baleen whales (Mysticeti) have evolved bulk-filter feeding mechanisms to efficiently feed on dense prey patches. Baleen whales are central place foragers where oxygen at the surface represents the central place and depth acts as the distance to prey. Although hypothesized that baleen whales will target the densest prey patches anywhere in the water column, how depth and density interact to influence foraging behaviour is poorly understood. We used multi-sensor archival tags and active acoustics to quantify Antarctic humpback whale foraging behaviour relative to prey. Our analyses reveal multi-stage foraging decisions driven by both krill depth and density. During daylight hours when whales did not feed, krill were found in deep high-density patches. As krill migrated vertically into larger and less dense patches near the surface, whales began to forage. During foraging bouts, we found that feeding rates (number of feeding lunges per hour) were greatest when prey was shallowest, and feeding rates decreased with increasing dive depth. This strategy is consistent with previous models of how air-breathing diving animals optimize foraging efficiency. Thus, humpback whales forage mainly when prey is more broadly distributed and shallower, presumably to minimize diving and searching costs and to increase feeding rates overall and thus foraging efficiency. Using direct measurements of feeding behaviour from animal-borne tags and prey availability from echosounders, our study demonstrates a multi-stage foraging process in a central place forager that we suggest acts to optimize overall efficiency by maximizing net energy gain over time. These data reveal a previously unrecognized level of complexity in predator-prey interactions and underscores the need to simultaneously measure prey distribution in marine central place forager studies.
Multiple-stage decisions in a marine central-place forager.
Friedlaender, Ari S; Johnston, David W; Tyson, Reny B; Kaltenberg, Amanda; Goldbogen, Jeremy A; Stimpert, Alison K; Curtice, Corrie; Hazen, Elliott L; Halpin, Patrick N; Read, Andrew J; Nowacek, Douglas P
2016-05-01
Air-breathing marine animals face a complex set of physical challenges associated with diving that affect the decisions of how to optimize feeding. Baleen whales (Mysticeti) have evolved bulk-filter feeding mechanisms to efficiently feed on dense prey patches. Baleen whales are central place foragers where oxygen at the surface represents the central place and depth acts as the distance to prey. Although hypothesized that baleen whales will target the densest prey patches anywhere in the water column, how depth and density interact to influence foraging behaviour is poorly understood. We used multi-sensor archival tags and active acoustics to quantify Antarctic humpback whale foraging behaviour relative to prey. Our analyses reveal multi-stage foraging decisions driven by both krill depth and density. During daylight hours when whales did not feed, krill were found in deep high-density patches. As krill migrated vertically into larger and less dense patches near the surface, whales began to forage. During foraging bouts, we found that feeding rates (number of feeding lunges per hour) were greatest when prey was shallowest, and feeding rates decreased with increasing dive depth. This strategy is consistent with previous models of how air-breathing diving animals optimize foraging efficiency. Thus, humpback whales forage mainly when prey is more broadly distributed and shallower, presumably to minimize diving and searching costs and to increase feeding rates overall and thus foraging efficiency. Using direct measurements of feeding behaviour from animal-borne tags and prey availability from echosounders, our study demonstrates a multi-stage foraging process in a central place forager that we suggest acts to optimize overall efficiency by maximizing net energy gain over time. These data reveal a previously unrecognized level of complexity in predator-prey interactions and underscores the need to simultaneously measure prey distribution in marine central place forager studies.