NASA Technical Reports Server (NTRS)
Mickens, Ronald E.
1989-01-01
A family of conditionally stable, forward Euler finite difference equations can be constructed for the simplest equation of Schroedinger type, namely u sub t - iu sub xx. Generalization of this result to physically realistic Schroedinger type equations is presented.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fike, Jeffrey A.
2013-08-01
The construction of stable reduced order models using Galerkin projection for the Euler or Navier-Stokes equations requires a suitable choice for the inner product. The standard L2 inner product is expected to produce unstable ROMs. For the non-linear Navier-Stokes equations this means the use of an energy inner product. In this report, Galerkin projection for the non-linear Navier-Stokes equations using the L2 inner product is implemented as a first step toward constructing stable ROMs for this set of physics.
NASA Technical Reports Server (NTRS)
Carpenter, Mark H.; Gottlieb, David; Abarbanel, Saul
1993-01-01
We present a systematic method for constructing boundary conditions (numerical and physical) of the required accuracy, for compact (Pade-like) high-order finite-difference schemes for hyperbolic systems. First, a roper summation-by-parts formula is found for the approximate derivative. A 'simultaneous approximation term' (SAT) is then introduced to treat the boundary conditions. This procedure leads to time-stable schemes even in the system case. An explicit construction of the fourth-order compact case is given. Numerical studies are presented to verify the efficacy of the approach.
HIAF: New opportunities for atomic physics with highly charged heavy ions
NASA Astrophysics Data System (ADS)
Ma, X.; Wen, W. Q.; Zhang, S. F.; Yu, D. Y.; Cheng, R.; Yang, J.; Huang, Z. K.; Wang, H. B.; Zhu, X. L.; Cai, X.; Zhao, Y. T.; Mao, L. J.; Yang, J. C.; Zhou, X. H.; Xu, H. S.; Yuan, Y. J.; Xia, J. W.; Zhao, H. W.; Xiao, G. Q.; Zhan, W. L.
2017-10-01
A new project, High Intensity heavy ion Accelerator Facility (HIAF), is currently being under design and construction in China. HIAF will provide beams of stable and unstable heavy ions with high energies, high intensities and high quality. An overview of new opportunities for atomic physics using highly charged ions and radioactive heavy ions at HIAF is given.
Di Giunta, Laura; Pastorelli, Concetta; Eisenberg, Nancy; Gerbino, Maria; Castellani, Valeria; Bombi, Anna Silvia
2010-01-01
Physical aggression declines for the majority of children from preschool to elementary school. Although this desistance generally continues during adolescence and early adulthood, a small group of children maintain a high level of physical aggression over time and develop other serious overt and covert antisocial behaviors. Typically, researchers have examined relations of developmental changes in physical aggression to later violence with teachers' or mothers' reports on surveys. Little is known about the degree to which children's self-reported physical aggression predicts later antisocial behavior. The longitudinal study in this article had a staggered, multiple cohort design. Measures of physical aggression were collected through self- and mother reports from age 11–14 years, which were used to construct trajectory groups (attrition was 6 and 14% from age 11–14, respectively, for self- and mother reports). Overt and covert antisocial behaviors were self-reported at age 18–19 years (attrition was 36% from age 11 to 18–19). Four trajectory groups (low stable, 11%; moderate-low declining, 34%; moderate declining, 39%; high stable, 16%) were identified from self-reports, whereas three trajectories (low declining, 33%; moderate declining, 49%; high stable, 18%) were identified from mothers' ratings. We examined the prediction of overt and covert antisocial behaviors in early adulthood from the high stable and the moderate declining trajectories. According to both informants, higher probability of belonging to the high stable group was associated with higher overt and covert antisocial behavior, whereas higher probability of belonging to the moderate declining group was associated with higher covert antisocial behavior. Our results support the value of children's as well as mothers' reports of children's aggression for predicting different types of serious antisocial behavior in adulthood. PMID:20878197
Di Giunta, Laura; Pastorelli, Concetta; Eisenberg, Nancy; Gerbino, Maria; Castellani, Valeria; Bombi, Anna Silvia
2010-12-01
Physical aggression declines for the majority of children from preschool to elementary school. Although this desistance generally continues during adolescence and early adulthood, a small group of children maintain a high level of physical aggression over time and develop other serious overt and covert antisocial behaviors. Typically, researchers have examined relations of developmental changes in physical aggression to later violence with teachers' or mothers' reports on surveys. Little is known about the degree to which children's self-reported physical aggression predicts later antisocial behavior. The longitudinal study in this article had a staggered, multiple cohort design. Measures of physical aggression were collected through self- and mother reports from age 11-14 years, which were used to construct trajectory groups (attrition was 6 and 14% from age 11-14, respectively, for self- and mother reports). Overt and covert antisocial behaviors were self-reported at age 18-19 years (attrition was 36% from age 11 to 18-19). Four trajectory groups (low stable, 11%; moderate-low declining, 34%; moderate declining, 39%; high stable, 16%) were identified from self-reports, whereas three trajectories (low declining, 33%; moderate declining, 49%; high stable, 18%) were identified from mothers' ratings. We examined the prediction of overt and covert antisocial behaviors in early adulthood from the high stable and the moderate declining trajectories. According to both informants, higher probability of belonging to the high stable group was associated with higher overt and covert antisocial behavior, whereas higher probability of belonging to the moderate declining group was associated with higher covert antisocial behavior. Our results support the value of children's as well as mothers' reports of children's aggression for predicting different types of serious antisocial behavior in adulthood.
Lee, Poh Soo; Eckert, Hagen; Hess, Ricarda; Gelinsky, Michael; Rancourt, Derrick; Krawetz, Roman; Cuniberti, Gianaurelio; Scharnweber, Dieter
2017-05-01
Skeletal development is a multistep process that involves the complex interplay of multiple cell types at different stages of development. Besides biochemical and physical cues, oxygen tension also plays a pivotal role in influencing cell fate during skeletal development. At physiological conditions, bone cells generally reside in a relatively oxygenated environment whereas chondrocytes reside in a hypoxic environment. However, it is technically challenging to achieve such defined, yet diverse oxygen distribution on traditional in vitro cultivation platforms. Instead, engineered osteochondral constructs are commonly cultivated in a homogeneous, stable environment. In this study, we describe a customized perfusion bioreactor having stable positional variability in oxygen tension at defined regions. Further, engineered collagen constructs were coaxed into adopting the shape and dimensions of defined cultivation platforms that were precasted in 1.5% agarose bedding. After cultivating murine embryonic stem cells that were embedded in collagen constructs for 50 days, mineralized constructs of specific dimensions and a stable structural integrity were achieved. The end-products, specifically constructs cultivated without chondroitin sulfate A (CSA), showed a significant increase in mechanical stiffness compared with their initial gel-like constructs. More importantly, the localization of osteochondral cell types was specific and corresponded to the oxygen tension gradient generated in the bioreactor. In addition, CSA in complementary with low oxygen tension was also found to be a potent inducer of chondrogenesis in this system. In summary, we have demonstrated a customized perfusion bioreactor prototype that is capable of generating a more dynamic, yet specific cultivation environment that could support propagation of multiple osteochondral lineages within a single engineered construct in vitro. Our system opens up new possibilities for in vitro research on human skeletal development.
Vertical regolith shield wall construction for lunar base applications
NASA Technical Reports Server (NTRS)
Kaplicky, Jan; Nixon, David; Wernick, Jane
1992-01-01
Lunar bases located on the lunar surface will require permanent protection from radiation and launch ejecta. This paper outlines a method of providing physical protection using lunar regolith that is constructed in situ as a modular vertical wall using specially devised methods of containment and construction. Deployable compartments, reinforced with corner struts, are elevated and filled by a moving gantry. The compartments interlock to form a stable wall. Different wall heights, thicknesses, and plan configurations are achieved by varying the geometry of the individual compartments, which are made from woven carbon fibers. Conventional terrestrial structural engineering techniques can be modified and used to establish the structural integrity and performance of the wall assembly.
Dark Matter Interpretation of the Neutron Decay Anomaly
NASA Astrophysics Data System (ADS)
Fornal, Bartosz; Grinstein, Benjamín
2018-05-01
There is a long-standing discrepancy between the neutron lifetime measured in beam and bottle experiments. We propose to explain this anomaly by a dark decay channel for the neutron, involving one or more dark sector particles in the final state. If any of these particles are stable, they can be the dark matter. We construct representative particle physics models consistent with all experimental constraints.
Dark Matter Interpretation of the Neutron Decay Anomaly.
Fornal, Bartosz; Grinstein, Benjamín
2018-05-11
There is a long-standing discrepancy between the neutron lifetime measured in beam and bottle experiments. We propose to explain this anomaly by a dark decay channel for the neutron, involving one or more dark sector particles in the final state. If any of these particles are stable, they can be the dark matter. We construct representative particle physics models consistent with all experimental constraints.
NASA Astrophysics Data System (ADS)
Arshad, Muhammad; Seadawy, Aly R.; Lu, Dianchen
2017-12-01
In optical fibers, the higher order non-linear Schrödinger equation (NLSE) with cubic quintic nonlinearity describes the propagation of extremely short pulses. We constructed bright and dark solitons, solitary wave and periodic solitary wave solutions of generalized higher order NLSE in cubic quintic non Kerr medium by applying proposed modified extended mapping method. These obtained solutions have key applications in physics and mathematics. Moreover, we have also presented the formation conditions on solitary wave parameters in which dark and bright solitons can exist for this media. We also gave graphically the movement of constructed solitary wave and soliton solutions, that helps to realize the physical phenomena's of this model. The stability of the model in normal dispersion and anomalous regime is discussed by using the modulation instability analysis, which confirms that all constructed solutions are exact and stable. Many other such types of models arising in applied sciences can also be solved by this reliable, powerful and effective method.
Cereal transformation through particle bombardment
NASA Technical Reports Server (NTRS)
Casas, A. M.; Kononowicz, A. K.; Bressan, R. A.; Hasegawa, P. M.; Mitchell, C. A. (Principal Investigator)
1995-01-01
The review focuses on experiments that lead to stable transformation in cereals using microprojectile bombardment. The discussion of biological factors that affect transformation examines target tissues and vector systems for gene transfer. The vector systems include reporter genes, selectable markers, genes of agronomic interest, and vector constructions. Other topics include physical parameters that affect DNA delivery, selection of stably transformed cells and plant regeneration, and analysis of gene expression and transmission to the progeny.
Constructive methods of invariant manifolds for kinetic problems
NASA Astrophysics Data System (ADS)
Gorban, Alexander N.; Karlin, Iliya V.; Zinovyev, Andrei Yu.
2004-06-01
The concept of the slow invariant manifold is recognized as the central idea underpinning a transition from micro to macro and model reduction in kinetic theories. We present the Constructive Methods of Invariant Manifolds for model reduction in physical and chemical kinetics, developed during last two decades. The physical problem of reduced description is studied in the most general form as a problem of constructing the slow invariant manifold. The invariance conditions are formulated as the differential equation for a manifold immersed in the phase space ( the invariance equation). The equation of motion for immersed manifolds is obtained ( the film extension of the dynamics). Invariant manifolds are fixed points for this equation, and slow invariant manifolds are Lyapunov stable fixed points, thus slowness is presented as stability. A collection of methods to derive analytically and to compute numerically the slow invariant manifolds is presented. Among them, iteration methods based on incomplete linearization, relaxation method and the method of invariant grids are developed. The systematic use of thermodynamics structures and of the quasi-chemical representation allow to construct approximations which are in concordance with physical restrictions. The following examples of applications are presented: nonperturbative deviation of physically consistent hydrodynamics from the Boltzmann equation and from the reversible dynamics, for Knudsen numbers Kn∼1; construction of the moment equations for nonequilibrium media and their dynamical correction (instead of extension of list of variables) to gain more accuracy in description of highly nonequilibrium flows; determination of molecules dimension (as diameters of equivalent hard spheres) from experimental viscosity data; model reduction in chemical kinetics; derivation and numerical implementation of constitutive equations for polymeric fluids; the limits of macroscopic description for polymer molecules, etc.
Proposed truncated Cu-Hf tight-binding potential to study the crystal-to-amorphous phase transition
NASA Astrophysics Data System (ADS)
Cui, Yuanyuan; Li, Jiahao; Dai, Ye; Liu, Baixin
2010-09-01
Proposed truncated Cu-Hf tight-binding potential was constructed by fitting the physical properties of Cu, Hf, and their stable compounds, i.e., Cu5Hf, Cu8Hf3, Cu10Hf7, and CuHf2. Based on the constructed potentials, molecular dynamics simulations were carried out to compare the relative stability of the crystalline solid solution and the disordered state. Simulation results not only reveal that the physical origin of crystal-to-amorphous transition is the crystalline lattice collapsing when the solute atoms exceeding the critical concentration, but also predict that the glass forming range (GFR) of the Cu-Hf system is 21-77 at. % Cu, which covers the GFRs determined by various metallic glass-producing techniques. Ion beam mixing experiments of the Cu-Hf system were conducted using 200 keV xenon ions and the results show that a uniform amorphous phase can be obtained in the Cu23Hf77 sample, matching well with the GFR determined by the interatomic potential, which, in turn, provides additional evidence to the relevance of the constructed Cu-Hf potential.
Construction of stable capillary networks using a microfluidic device.
Sudo, Ryo
2015-01-01
Construction of stable capillary networks is required to provide sufficient oxygen and nutrients to the deep region of thick tissues, which is important in the context of 3D tissue engineering. Although conventional in vitro culture models have been used to investigate the mechanism of capillary formation, recent advances in microfluidics technologies allowed us to control biophysical and biochemical culture environments more precisely, which led to the construction of functional and stable capillary networks. In this study, endothelial cells and mesenchymal stem cells were co-cultured in microfluidic devices to construct stable capillary networks, which resulted in the construction of luminal structures covered by pericytes. Interactions between endothelial cells and mesenchymal stem cells are also discussed in the context of capillary formation.
Coarse-grained, foldable, physical model of the polypeptide chain.
Chakraborty, Promita; Zuckermann, Ronald N
2013-08-13
Although nonflexible, scaled molecular models like Pauling-Corey's and its descendants have made significant contributions in structural biology research and pedagogy, recent technical advances in 3D printing and electronics make it possible to go one step further in designing physical models of biomacromolecules: to make them conformationally dynamic. We report here the design, construction, and validation of a flexible, scaled, physical model of the polypeptide chain, which accurately reproduces the bond rotational degrees of freedom in the peptide backbone. The coarse-grained backbone model consists of repeating amide and α-carbon units, connected by mechanical bonds (corresponding to ϕ and ψ) that include realistic barriers to rotation that closely approximate those found at the molecular scale. Longer-range hydrogen-bonding interactions are also incorporated, allowing the chain to readily fold into stable secondary structures. The model is easily constructed with readily obtainable parts and promises to be a tremendous educational aid to the intuitive understanding of chain folding as the basis for macromolecular structure. Furthermore, this physical model can serve as the basis for linking tangible biomacromolecular models directly to the vast array of existing computational tools to provide an enhanced and interactive human-computer interface.
Nessen, Thomas; Demmelmaier, Ingrid; Nordgren, Birgitta; Opava, Christina H
2015-01-01
The aim of the present study was to investigate aspects of reliability and validity of the Exercise Self-Efficacy Scale (ESES-S) in a rheumatoid arthritis (RA) population. A total of 244 people with RA participating in a physical activity study were included. The six-item ESES-S, exploring confidence in performing exercise, was assessed for test-retest reliability over 4-6 months, and for internal consistency. Construct validity investigated correlation with similar and other constructs. An intraclass correlation coefficient (ICC) of 0.59 (95% CI 0.37-0.73) was found for 84 participants with stable health perceptions between measurement occasions. Cronbach's alpha coefficients of 0.87 and 0.89 were found at the first and second measurements. Corrected item-total correlation single ESES-S items ranged between 0.53 and 0.73. Construct convergent validity for the ESES-S was partly confirmed by correlations with health-enhancing physical activity and outcome expectations respectively (Pearson's r = 0.18, p < 0.01). Construct divergent validity was confirmed by the absence of correlations with age or gender. No floor or ceiling effects were found for ESES-S. The results indicate that the ESES-S has moderate test-retest reliability and respectable internal consistency in people with RA. Construct validity was partially supported in the present sample. Further research on construct validity of the ESES-S is recommended. Physical exercise is crucial for management of symptoms and co-morbidity in rheumatoid arthritis. Self-efficacy for exercise is important to address in rehabilitation as it regulates exercise motivation and behavior. Measurement properties of self-efficacy scales need to be assessed in specific populations and different languages.
Particlelike solutions of the Einstein-Dirac equations
NASA Astrophysics Data System (ADS)
Finster, Felix; Smoller, Joel; Yau, Shing-Tung
1999-05-01
The coupled Einstein-Dirac equations for a static, spherically symmetric system of two fermions in a singlet spinor state are derived. Using numerical methods, we construct an infinite number of solitonlike solutions of these equations. The stability of the solutions is analyzed. For weak coupling (i.e., small rest mass of the fermions), all the solutions are linearly stable (with respect to spherically symmetric perturbations), whereas for stronger coupling, both stable and unstable solutions exist. For the physical interpretation, we discuss how the energy of the fermions and the (ADM) mass behave as functions of the rest mass of the fermions. Although gravitation is not renormalizable, our solutions of the Einstein-Dirac equations are regular and well behaved even for strong coupling.
Study on perception and control layer of mine CPS with mixed logic dynamic approach
NASA Astrophysics Data System (ADS)
Li, Jingzhao; Ren, Ping; Yang, Dayu
2017-01-01
Mine inclined roadway transportation system of mine cyber physical system is a hybrid system consisting of a continuous-time system and a discrete-time system, which can be divided into inclined roadway signal subsystem, error-proofing channel subsystems, anti-car subsystems, and frequency control subsystems. First, to ensure stable operation, improve efficiency and production safety, this hybrid system model with n inputs and m outputs is constructed and analyzed in detail, then its steady schedule state to be solved. Second, on the basis of the formal modeling for real-time systems, we use hybrid toolbox for system security verification. Third, the practical application of mine cyber physical system shows that the method for real-time simulation of mine cyber physical system is effective.
Nonlinear Electromagnetic Stabilization of Plasma Microturbulence
NASA Astrophysics Data System (ADS)
Whelan, G. G.; Pueschel, M. J.; Terry, P. W.
2018-04-01
The physical causes for the strong stabilizing effect of finite plasma β on ion-temperature-gradient-driven turbulence, which far exceeds quasilinear estimates, are identified from nonlinear gyrokinetic simulations. The primary contribution stems from a resonance of frequencies in the dominant nonlinear interaction between the unstable mode, the stable mode, and zonal flows, which maximizes the triplet correlation time and therefore the energy transfer efficiency. A modification to mixing-length transport estimates is constructed, which reproduces nonlinear heat fluxes throughout the examined β range.
Liu, Biwu; Liu, Juewen
2017-07-19
While nanoparticle solutions cannot freeze in general, they may remain stable in the presence of polymer stabilizers. We herein communicate that gold nanoparticles (AuNPs) are stable in the presence of thiolated DNA after a freeze-thaw cycle. The DNA is conjugated to AuNPs during freezing without additional reagents and the conjugation can be completed in a few minutes. More importantly, the DNA density is 20-30% higher than that prepared by the typical salt-aging method. By lowering temperature, DNA hybridization is also promoted, allowing the construction of better nanoflares with doubled probe density and signaling sensitivity. This freezing method works for AuNPs from 5 to 100 nm and all tested DNA sequences. The mechanism was studied by separating the effect of temperature, freezing and thawing, where the exclusion of salt and AuNPs by the growing ice crystals is deemed critical. In addition to developing a simple method, this study articulates unique physical processes during freezing with important fundamental surface science implications, and it could be extended to other systems.
Bohndiek, Sarah E.; Bodapati, Sandhya; Van De Sompel, Dominique; Kothapalli, Sri-Rajasekhar; Gambhir, Sanjiv S.
2013-01-01
Photoacoustic imaging combines the high contrast of optical imaging with the spatial resolution and penetration depth of ultrasound. This technique holds tremendous potential for imaging in small animals and importantly, is clinically translatable. At present, there is no accepted standard physical phantom that can be used to provide routine quality control and performance evaluation of photoacoustic imaging instruments. With the growing popularity of the technique and the advent of several commercial small animal imaging systems, it is important to develop a strategy for assessment of such instruments. Here, we developed a protocol for fabrication of physical phantoms for photoacoustic imaging from polyvinyl chloride plastisol (PVCP). Using this material, we designed and constructed a range of phantoms by tuning the optical properties of the background matrix and embedding spherical absorbing targets of the same material at different depths. We created specific designs to enable: routine quality control; the testing of robustness of photoacoustic signals as a function of background; and the evaluation of the maximum imaging depth available. Furthermore, we demonstrated that we could, for the first time, evaluate two small animal photoacoustic imaging systems with distinctly different light delivery, ultrasound imaging geometries and center frequencies, using stable physical phantoms and directly compare the results from both systems. PMID:24086557
Exotica and the status of the strong cosmic censor conjecture in four dimensions
NASA Astrophysics Data System (ADS)
Etesi, Gábor
2017-12-01
An immense class of physical counterexamples to the four dimensional strong cosmic censor conjecture—in its usual broad formulation—is exhibited. More precisely, out of any closed and simply connected 4-manifold an open Ricci-flat Lorentzian 4-manifold is constructed which is not globally hyperbolic, and no perturbation of which, in any sense, can be globally hyperbolic. This very stable non-global-hyperbolicity is the consequence of our open spaces having a ‘creased end’—i.e. an end diffeomorphic to an exotic \
Thermochemical characterization of some thermally stable thermoplastic and thermoset polymers
NASA Technical Reports Server (NTRS)
Kourtides, D. A.; Gilwee, W. J., Jr.; Parker, J. A.
1979-01-01
The thermochemical and flammability properties of some thermally stable polymers considered for use in aircraft interiors are described. The properties studied include: (1) thermomechanical properties such as glass transition and melt temperature; (2) dynamic thermogravimetric analysis in anaerobic environment; (3) flammability properties such as oxygen index, flame spread, and smoke evolution; and (4) selected physical properties. The thermoplastic polymers evaluated include polyphenylene sulfide, polyaryl sulfone, 9,9-bis(4-hydroxyphenyl)-fluorene polycarbonate-poly(dimethylsiloxane) and polyether sulfone. The thermoset polymers evaluated include epoxy, bismaleimide, a modified phenolic, and polyaromatic melamine resin. These resins were primarily used in the fabrication of glass-reinforced prepregs for the construction of experimental panels. Test results and relative rankings of some of the flammability parameters are presented, and the relationship of the molecular structure, char yield, and flammability properties of these polymers are discussed.
Horndeski extension of the minimal theory of quasidilaton massive gravity
NASA Astrophysics Data System (ADS)
De Felice, Antonio; Mukohyama, Shinji; Oliosi, Michele
2017-11-01
The minimal theory of quasidilaton massive gravity allows for a stable self-accelerating de Sitter solution in a wide range of parameters. On the other hand, in order for the theory to be compatible with local gravity tests, the fifth force due to the quasidilaton scalar needs to be screened at local scales. The present paper thus extends the theory by inclusion of a cubic Horndeski term in a way that (i) respects the quasidilaton global symmetry, that (ii) maintains the physical degrees of freedom in the theory being 3, that (iii) can accommodate the Vainshtein screening mechanism, and that (iv) still allows for a stable self-accelerating de Sitter solution. After adding the Horndeski term (and a k -essence type nonlinear kinetic term as well) to the precursor action, we switch to the Hamiltonian language and find a complete set of independent constraints. We then construct the minimal theory with 3 physical degrees of freedom by carefully adding a pair of constraints to the total Hamiltonian of the precursor theory. Switching back to the Lagrangian language, we study cosmological solutions and their stability in the minimal theory. In particular, we show that a self-accelerating de Sitter solution is stable for a wide range of parameters. Furthermore, as in the minimal theory of massive gravity, the propagation speed of the massive gravitational waves in the high momentum limit precisely agrees with the speed of light.
Choi, Bongsam
2018-01-01
[Purpose] This study aimed to cross-cultural adapt and validate the Korean version of an physical activity measure (K-PAM) for community-dwelling elderly. [Subjects and Methods] One hundred and thirty eight community-dwelling elderlies, 32 males and 106 female, participated in the study. All participants were asked to fill out a fifty-one item questionnaire measuring perceived difficulty in the activities of daily living (ADL) for the elderly. One-parameter model of item response theory (Rasch analysis) was applied to determine the construct validity and to inspect item-level psychometric properties of 51 ADL items of the K-PAM. [Results] Person separation reliability (analogous to Cronbach's alpha) for internal consistency was ranging 0.93 to 0.94. A total of 16 items was misfit to the Rasch model. After misfit item deletion, 35 ADL items of the K-PAM were placed in an empirically meaningful hierarchy from easy to hard. The item-person map analysis delineated that the item difficulty was well matched for the elderlies with moderate and low ability except for high ceilings. [Conclusion] Cross-cultural adapted K-PAM was shown to be sufficient for establishing construct validity and stable psychometric properties confirmed by person separation reliability and fit statistics.
Stability of knotted vortices in wave chaos
NASA Astrophysics Data System (ADS)
Taylor, Alexander; Dennis, Mark
Large scale tangles of disordered filaments occur in many diverse physical systems, from turbulent superfluids to optical volume speckle to liquid crystal phases. They can exhibit particular large scale random statistics despite very different local physics. We have previously used the topological statistics of knotting and linking to characterise the large scale tangling, using the vortices of three-dimensional wave chaos as a universal model system whose physical lengthscales are set only by the wavelength. Unlike geometrical quantities, the statistics of knotting depend strongly on the physical system and boundary conditions. Although knotting patterns characterise different systems, the topology of vortices is highly unstable to perturbation, under which they may reconnect with one another. In systems of constructed knots, these reconnections generally rapidly destroy the knot, but for vortex tangles the topological statistics must be stable. Using large scale simulations of chaotic eigenfunctions, we numerically investigate the prevalence and impact of reconnection events, and their effect on the topology of the tangle.
A crawling robot driven by multi-stable origami
NASA Astrophysics Data System (ADS)
Pagano, Alexander; Yan, Tongxi; Chien, Brian; Wissa, A.; Tawfick, S.
2017-09-01
Using origami folding to construct and actuate mechanisms and machines offers attractive opportunities from small, scalable, and cheap robots to deployable adaptive structures. This paper presents the design of a bio-inspired origami crawling robot constructed by folding sheets of paper. The origami building block structure is based on the Kresling crease pattern (CP), a chiral tower with a polygonal base, which expands and contracts through coupled longitudinal and rotational motion similar to a screw. We design the origami to have multi-stable structural equilibria which can be tuned by changing the folding CP. Kinematic analysis of these structures based on rigid-plates and hinges at fold lines precludes the shape transformation associated with the bistability of the physical models. To capture the kinematics of the bi-stable origami, the panels’ deformation behavior is modeled utilizing principles of virtual folds. Virtual folds approximate material bending by hinged, rigid panels, which facilitates the development of a kinematic solution via rigid-plate rotation analysis. As such, the kinetics and stability of folded structures are investigated by assigning suitable torsional spring constants to the fold lines. The results presented demonstrate the effect of fold-pattern geometries on the snapping behavior of the bi-stable origami structure based on the Kresling pattern. The crawling robot is presented as a case study for the use of this origami structure to mimic crawling locomotion. The robot is comprised of two origami towers nested inside a paper bellow, and connected by 3D printed end plates. DC motors are used to actuate the expansion and contraction of the internal origami structures to achieve forward locomotion and steering. Beyond locomotion, this simple design can find applications in manipulators, booms, and active structures.
Wittmann, Katharina; Storck, Katharina; Muhr, Christian; Mayer, Helena; Regn, Sybille; Staudenmaier, Rainer; Wiese, Hinrich; Maier, Gerhard; Bauer-Kreisel, Petra; Blunk, Torsten
2016-10-01
Adipose tissue engineering aims at the restoration of soft tissue defects and the correction of contour deformities. It is therefore crucial to provide functional adipose tissue implants with appropriate volume stability. Here, we investigate two different fibrin formulations, alone or in combination with biodegradable polyurethane (PU) scaffolds as additional support structures, with regard to their suitability to generate volume-stable adipose tissue constructs. Human adipose-derived stem cells (ASCs) were incorporated in a commercially available fibrin sealant as well as a stable fibrin hydrogel previously developed by our group. The composite constructs made from the commercially available fibrin and porous poly(ε-caprolactone)-based polyurethane scaffolds exhibited increased volume stability as compared to fibrin gels alone; however, only constructs using the stable fibrin gels completely maintained their size and weight for 21 days. Adipogenesis of ASCs was not impaired by the additional PU scaffold. After induction with a common hormonal cocktail, for constructs with either fibrin formulation, strong adipogenic differentiation of ASCs was observed after 21 days in vitro. Furthermore, upregulation of adipogenic marker genes was demonstrated at mRNA (PPARγ, C/EBPα, GLUT4 and aP2; qRT-PCR) and protein (leptin; ELISA) levels. Stable fibrin/PU constructs were further evaluated in a pilot in vivo study, resulting in areas of well-vascularized adipose tissue within the implants after only 5 weeks. Copyright © 2013 John Wiley & Sons, Ltd. Copyright © 2013 John Wiley & Sons, Ltd.
Stability of generic thin shells in conformally flat spacetimes
NASA Astrophysics Data System (ADS)
Amirabi, Z.
2017-07-01
Some important spacetimes are conformally flat; examples are the Robertson-Walker cosmological metric, the Einstein-de Sitter spacetime, and the Levi-Civita-Bertotti-Robinson and Mannheim metrics. In this paper we construct generic thin shells in conformally flat spacetime supported by a perfect fluid with a linear equation of state, i.e., p=ω σ . It is shown that, for the physical domain of ω , i.e., 0<ω ≤ 1, such thin shells are not dynamically stable. The stability of the timelike thin shells with the Mannheim spacetime as the outer region is also investigated.
Trudeau, Natacha; Sutton, Ann; Morford, Jill P; Côté-Giroux, Patricia; Pauzé, Anne-Marie; Vallée, Véronique
2010-12-01
Given the frequent use of graphic symbols in augmentative and alternative communication (AAC) systems, some individuals who use AAC may have greater familiarity with constructing graphic-symbol sequences than do speaking individuals without disabilities. Whether this increased familiarity has an impact on the interpretation of such sequences or on the relationship between construction and interpretation is fundamental to our understanding of the mechanisms underlying communication using graphic symbols. In this study, individuals who use graphic-symbol AAC systems were asked to construct and interpret graphic-symbol sequences representing the same target content (simple and complex propositions). The majority of participants used stable response patterns on both tasks; a minority were inconsistent on both tasks. Asymmetrical patterns (stable on one task but not the other) were rare, suggesting that neither channel (construction or interpretation) preceded the other, in contrast to earlier findings with participants without disabilities (i.e., novice users of graphic symbols). Furthermore, there were differences between stable and less stable responders on measures of syntactic comprehension and cognitive level but not on chronological age, receptive vocabulary, or AAC system characteristics and length of use.
23 CFR 635.305 - Physical construction.
Code of Federal Regulations, 2011 CFR
2011-04-01
... 23 Highways 1 2011-04-01 2011-04-01 false Physical construction. 635.305 Section 635.305 Highways... CONSTRUCTION AND MAINTENANCE Physical Construction Authorization § 635.305 Physical construction. For purposes of this subpart the physical construction of a project is considered to consist of the actual...
23 CFR 635.305 - Physical construction.
Code of Federal Regulations, 2010 CFR
2010-04-01
... 23 Highways 1 2010-04-01 2010-04-01 false Physical construction. 635.305 Section 635.305 Highways... CONSTRUCTION AND MAINTENANCE Physical Construction Authorization § 635.305 Physical construction. For purposes of this subpart the physical construction of a project is considered to consist of the actual...
23 CFR 635.305 - Physical construction.
Code of Federal Regulations, 2012 CFR
2012-04-01
... 23 Highways 1 2012-04-01 2012-04-01 false Physical construction. 635.305 Section 635.305 Highways... CONSTRUCTION AND MAINTENANCE Physical Construction Authorization § 635.305 Physical construction. For purposes of this subpart the physical construction of a project is considered to consist of the actual...
23 CFR 635.305 - Physical construction.
Code of Federal Regulations, 2014 CFR
2014-04-01
... 23 Highways 1 2014-04-01 2014-04-01 false Physical construction. 635.305 Section 635.305 Highways... CONSTRUCTION AND MAINTENANCE Physical Construction Authorization § 635.305 Physical construction. For purposes of this subpart the physical construction of a project is considered to consist of the actual...
23 CFR 635.305 - Physical construction.
Code of Federal Regulations, 2013 CFR
2013-04-01
... 23 Highways 1 2013-04-01 2013-04-01 false Physical construction. 635.305 Section 635.305 Highways... CONSTRUCTION AND MAINTENANCE Physical Construction Authorization § 635.305 Physical construction. For purposes of this subpart the physical construction of a project is considered to consist of the actual...
Lysaker, Paul H; Tunze, Chloe; Yanos, Philip T; Roe, David; Ringer, Jamie; Rand, Kevin
2012-06-01
Research suggests stereotype endorsement or self-stigma serves as a barrier to functioning and well-being among persons with schizophrenia. Little is known about how stable self-stigma is and whether it is linked over time with related constructs such as discrimination experiences and psychological distress. Stereotype endorsement and discrimination experiences were assessed using the Internalized Stigma of Mental Illness Scale and psychological distress was assessed using the Emotional Discomfort component of the Positive and Negative Syndrome Scale, at three points in time across 1 year. Path analyses indicated that the constructs of stereotype endorsement and discrimination experiences are stable over periods of 5-7 months and may fluctuate over 12 months. Further, the constructs of stereotype endorsement and discrimination experiences were related to one another concurrently, but analyses failed to detect a relationship over time. Neither construct was related to psychological distress over time. Self-stigma is a stable construct in the short term, and is distinct from related constructs such as discrimination experiences and psychological distress.
Structural Impact of Construction Loads : [Technical Summary
DOT National Transportation Integrated Search
2012-01-01
Numerous bridge construction accidents have occurred : because of construction loadings, which are an underemphasized : topic in many specifications and design : manuals. Bridge girders are least stable during the : construction phase, so it is impor...
Structural Impact of Construction Loads : [Technical Summary
DOT National Transportation Integrated Search
2012-01-01
Numerous bridge construction accidents have occurred because of construction loadings, which are an underemphasized topic in many specifications and design manuals. Bridge girders are least stable during the construction phase, so it is important for...
Loprinzi, Paul D; Walker, Jerome F
2016-01-01
To our knowledge, no longitudinal epidemiological study among daily smokers has examined the effects of physical activity change/ trajectory on smoking cessation. The purpose of this study was to examine the longitudinal effects of changes in physical activity on smoking cessation among a national sample of young (16-24 y) daily smokers. Data from the 2003-2005 National Youth Smoking Cessation Survey were used (N = 1178). Using hierarchical agglomerative cluster analysis, 5 distinct self-reported physical activity trajectories over 3 time periods (baseline, 12-month, and 24-month follow-up) were observed, including stable low physical activity, decreasing physical activity, curvilinear physical activity, stable high physical activity, and increasing physical activity. Nicotine dependence (Heaviness of Smoking Index) and demographic parameters were assessed via survey. With stable low physical activity (16.2% quit smoking) serving as the referent group, those in the stable high physical activity (24.8% quit smoking) group had 1.8 greater odds of not smoking at the 24-month follow-up period (odds ratio = 1.81; 95% confidence interval, 1.12-2.91) after adjusting for nicotine dependence, age, gender, race-ethnicity, and education. Maintenance of regular physical activity among young daily smokers may help to facilitate smoking cessation.
Borgna, F; Ballan, M; Corradetti, S; Vettorato, E; Monetti, A; Rossignoli, M; Manzolaro, M; Scarpa, D; Mazzi, U; Realdon, N; Andrighetto, A
2017-09-01
Radiopharmaceuticals represent a fundamental tool for nuclear medicine procedures, both for diagnostic and therapeutic purposes. The present work aims to explore the Isotope Separation On-Line (ISOL) technique for the production of carrier-free radionuclides for nuclear medicine at SPES, a nuclear physics facility under construction at INFN-LNL. Stable ion beams of strontium, yttrium and iodine were produced using the SPES test bench (Front-End) to simulate the production of 89 Sr, 90 Y, 125 I and 131 I and collected with good efficiency on suitable targets. Copyright © 2017 Elsevier Ltd. All rights reserved.
NASA Astrophysics Data System (ADS)
Lenzi, Silvia M.; Clement, Emmanuel
2018-02-01
The Advanced Gamma Tracking Array, AGATA, is presently in its construction phase in which the European γ-spectroscopy research community is involved since several years. This powerful HPGe array offers unique possibilities for the study of rare phenomena in nuclei by detailed gamma-ray spectroscopy. The physics campaign in GANIL foresees different setups, with AGATA coupled to different spectrometers, to study nuclear structure properties of nuclei all across the nuclear chart, from light nuclei to very heavy species, using stable and radioactive beams. After a brief description of the AGATA concept, some recent results are presented together with the very interesting opportunities for nuclear structure research in the forthcoming years with AGATA at GANIL.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Song, Junhua; Zheng, Jianming; Feng, Shuo
Lithium sulfur (LiS) batteries are promising alternatives to conventional Li-ion batteries in terms of specific capacity and energy. But, the technical challenges raised from the soluble polysulfide (PS) in organic electrolyte deter their implementation in practical applications. Nanoengineered structure and chemical adsorptive materials hold great promise in mitigating the PS migration problem. We develop a tubular titanium oxide (TiO 2)/reduced graphene oxide (rGO) composite structure (TG) as a sulfur hosting material for constructing better performed LiS batteries. The TG/sulfur cathode (TG/S) is able to deliver ~1200 mAh g -1 specific capacity with stable operation for over 550 cycles. Moreover, themore » TG/S composite cathode shows stable Coulombic efficiencies of over ~95% at various C rates, which are ~10% higher than those of the rGO/sulfur (G/S) counterparts. The superior electrochemical performances of TG/S could be ascribed to the synergistic effects between the conductive rGO support and the physically/chemically absorptive TiO 2, that is, the spatial tubular structure of TiO 2 provides intimate contact and physical confinement for sulfur, while the polar TiO 2 in TG/S shows strong chemical interaction towards the sulfur species.« less
Song, Junhua; Zheng, Jianming; Feng, Shuo; ...
2017-11-20
Lithium sulfur (LiS) batteries are promising alternatives to conventional Li-ion batteries in terms of specific capacity and energy. But, the technical challenges raised from the soluble polysulfide (PS) in organic electrolyte deter their implementation in practical applications. Nanoengineered structure and chemical adsorptive materials hold great promise in mitigating the PS migration problem. We develop a tubular titanium oxide (TiO 2)/reduced graphene oxide (rGO) composite structure (TG) as a sulfur hosting material for constructing better performed LiS batteries. The TG/sulfur cathode (TG/S) is able to deliver ~1200 mAh g -1 specific capacity with stable operation for over 550 cycles. Moreover, themore » TG/S composite cathode shows stable Coulombic efficiencies of over ~95% at various C rates, which are ~10% higher than those of the rGO/sulfur (G/S) counterparts. The superior electrochemical performances of TG/S could be ascribed to the synergistic effects between the conductive rGO support and the physically/chemically absorptive TiO 2, that is, the spatial tubular structure of TiO 2 provides intimate contact and physical confinement for sulfur, while the polar TiO 2 in TG/S shows strong chemical interaction towards the sulfur species.« less
Du, HuiYun; Everett, Bronwyn; Newton, Phillip J; Salamonson, Yenna; Davidson, Patricia M
2012-02-01
To explore the conceptual underpinnings of self-efficacy to address the barriers to participating in physical activity and propose a model of intervention. The benefits of physical activity in reducing cardiovascular risk have led to evidence-based recommendations for patients with heart disease, including those with chronic heart failure. However, adherence to best practice recommendations is often suboptimal, particularly in those individuals who experience high symptom burden and feel less confident to undertake physical activity. Self-efficacy is the degree of confidence an individual has in his/her ability to perform behaviour under several specific circumstances. Four factors influence an individual's level of self-efficacy: (1) past performance, (2) vicarious experience, (3) verbal persuasion and (4) physiological arousal. Discursive. Using the method of a discursive paper, this article seeks to explore the conceptual underpinnings of self-efficacy to address the barriers to participating in physical activity and proposes a model of intervention, the Home-Heart-Walk, to promote physical activity and monitor functional status. Implementing effective interventions to promote physical activities require appreciation of factors impacting on behaviour change. Addressing concepts relating to self-efficacy in physical activity interventions may promote participation and adherence in the longer term. The increasing burden of chronic disease and the emphasis on self-management strategies underscore the importance of promoting adherence to recommendations, such as physical activity. © 2011 Blackwell Publishing Ltd.
Charged hadrons in local finite-volume QED+QCD with C⋆ boundary conditions
NASA Astrophysics Data System (ADS)
Lucini, B.; Patella, A.; Ramos, A.; Tantalo, N.
2016-02-01
In order to calculate QED corrections to hadronic physical quantities by means of lattice simulations, a coherent description of electrically-charged states in finite volume is needed. In the usual periodic setup, Gauss's law and large gauge transformations forbid the propagation of electrically-charged states. A possible solution to this problem, which does not violate the axioms of local quantum field theory, has been proposed by Wiese and Polley, and is based on the use of C⋆ boundary conditions. We present a thorough analysis of the properties and symmetries of QED in isolation and QED coupled to QCD, with C⋆ boundary conditions. In particular we learn that a certain class of electrically-charged states can be constructed in a fully consistent fashion without relying on gauge fixing and without peculiar complications. This class includes single particle states of most stable hadrons. We also calculate finite-volume corrections to the mass of stable charged particles and show that these are much smaller than in non-local formulations of QED.
HOEKMAN, JOHN D; SRIVASTAVA, PRAMOD; HO, RODNEY J Y
2014-01-01
Previous we reported a novel pressurized olfactory drug (POD) delivery device that deposit aerosolized drug preferentially to upper nasal cavity. This POD device provided sustained CNS levels of soluble morphine analgesic effects. However, analgesic onset of less soluble fentanyl was more rapid but brief, likely due to hydrophobic fentanyl redistribution readily back to blood. To determine whether fentanyl incorporated into an aerosol stable liposome that binds to nasal epithelial cells will enhance CNS drug exposure and analgesic effects and reduce plasma exposure, we constructed RGD liposomes anchored with acylated integrin binding peptides (palmitoyl-GRGDS). The RGD liposomes, which assume gel-phase membrane structure at 25°C were stable under the stress of aerosolization as only 2.2 ± 0.5 % calcein leakage detected. The RGD mediated integrin binding of liposome is also verified to be unaffected by aerosolization. Rats treated with fentanyl in RGD-liposome and POD device exhibited greater analgesic effect, compared to the free drug counterpart (AUCeffect = 1387.l vs. 760.1 %MPE*min); while ~20% reduced plasma drug exposure was noted (AUC0-120 = 208.2 vs 284.8 ng*min/ml). Collectively, fentanyl incorporated in RGD-liposomes are physically and biologically stable under aerosolization, enhanced the overall analgesic effects and reduced plasma drug exposure for the first 2 hours. PMID:24909764
Nims, Robert J; Cigan, Alexander D; Durney, Krista M; Jones, Brian K; O'Neill, John D; Law, Wing-Sum A; Vunjak-Novakovic, Gordana; Hung, Clark T; Ateshian, Gerard A
2017-08-01
When cultured with sufficient nutrient supply, engineered cartilage synthesizes proteoglycans rapidly, producing an osmotic swelling pressure that destabilizes immature collagen and prevents the development of a robust collagen framework, a hallmark of native cartilage. We hypothesized that mechanically constraining the proteoglycan-induced tissue swelling would enhance construct functional properties through the development of a more stable collagen framework. To test this hypothesis, we developed a novel "cage" growth system to mechanically prevent tissue constructs from swelling while ensuring adequate nutrient supply to the growing construct. The effectiveness of constrained culture was examined by testing constructs embedded within two different scaffolds: agarose and cartilage-derived matrix hydrogel (CDMH). Constructs were seeded with immature bovine chondrocytes and cultured under free swelling (FS) conditions for 14 days with transforming growth factor-β before being placed into a constraining cage for the remainder of culture. Controls were cultured under FS conditions throughout. Agarose constructs cultured in cages did not expand after the day 14 caging while FS constructs expanded to 8 × their day 0 weight after 112 days of culture. In addition to the physical differences in growth, by day 56, caged constructs had higher equilibrium (agarose: 639 ± 179 kPa and CDMH: 608 ± 257 kPa) and dynamic compressive moduli (agarose: 3.4 ± 1.0 MPa and CDMH 2.8 ± 1.0 MPa) than FS constructs (agarose: 193 ± 74 kPa and 1.1 ± 0.5 MPa and CDMH: 317 ± 93 kPa and 1.8 ± 1.0 MPa for equilibrium and dynamic properties, respectively). Interestingly, when normalized to final day wet weight, cage and FS constructs did not exhibit differences in proteoglycan or collagen content. However, caged culture enhanced collagen maturation through the increased formation of pyridinoline crosslinks and improved collagen matrix stability as measured by α-chymotrypsin solubility. These findings demonstrate that physically constrained culture of engineered cartilage constructs improves functional properties through improved collagen network maturity and stability. We anticipate that constrained culture may benefit other reported engineered cartilage systems that exhibit a mismatch in proteoglycan and collagen synthesis.
Meaney, Calvin J; Arabi, Ziad; Venuto, Rocco C; Consiglio, Joseph D; Wilding, Gregory E; Tornatore, Kathleen M
2014-06-12
After renal transplantation, many patients experience adverse effects from maintenance immunosuppressive drugs. When these adverse effects occur, patient adherence with immunosuppression may be reduced and impact allograft survival. If these adverse effects could be prospectively monitored in an objective manner and possibly prevented, adherence to immunosuppressive regimens could be optimized and allograft survival improved. Prospective, standardized clinical approaches to assess immunosuppressive adverse effects by health care providers are limited. Therefore, we developed and evaluated the application, reliability and validity of a novel adverse effects scoring system in renal transplant recipients receiving calcineurin inhibitor (cyclosporine or tacrolimus) and mycophenolic acid based immunosuppressive therapy. The scoring system included 18 non-renal adverse effects organized into gastrointestinal, central nervous system and aesthetic domains developed by a multidisciplinary physician group. Nephrologists employed this standardized adverse effect evaluation in stable renal transplant patients using physical exam, review of systems, recent laboratory results, and medication adherence assessment during a clinic visit. Stable renal transplant recipients in two clinical studies were evaluated and received immunosuppressive regimens comprised of either cyclosporine or tacrolimus with mycophenolic acid. Face, content, and construct validity were assessed to document these adverse effect evaluations. Inter-rater reliability was determined using the Kappa statistic and intra-class correlation. A total of 58 renal transplant recipients were assessed using the adverse effects scoring system confirming face validity. Nephrologists (subject matter experts) rated the 18 adverse effects as: 3.1 ± 0.75 out of 4 (maximum) regarding clinical importance to verify content validity. The adverse effects scoring system distinguished 1.75-fold increased gastrointestinal adverse effects (p=0.008) in renal transplant recipients receiving tacrolimus and mycophenolic acid compared to the cyclosporine regimen. This finding demonstrated construct validity. Intra-class correlation was 0.81 (95% confidence interval: 0.65-0.90) and Kappa statistic of 0.68 ± 0.25 for all 18 adverse effects and verified substantial inter-rater reliability. This immunosuppressive adverse effects scoring system in stable renal transplant recipients was evaluated and substantiated face, content and construct validity with inter-rater reliability. The scoring system may facilitate prospective, standardized clinical monitoring of immunosuppressive adverse drug effects in stable renal transplant recipients and improve medication adherence.
Structural Impact of Construction Loads
DOT National Transportation Integrated Search
2012-08-01
Numerous bridge construction accidents have occurred across the country because of construction loadings, which are an underemphasized : topic in many DOT specifications and design manuals. Bridge girders are least stable when they are subjected to c...
Structural Impact of Construction Loads
DOT National Transportation Integrated Search
2012-08-01
Numerous bridge construction accidents have occurred across the country because of construction loadings, which are an underemphasized topic in many DOT specifications and design manuals. Bridge girders are least stable when they are subjected to con...
From Coordination Cages to a Stable Crystalline Porous Hydrogen-Bonded Framework
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ju, Zhanfeng; Liu, Guoliang; Chen, Yu-Sheng
2017-03-20
A stable framework has been constructed through multiple charge-assisted H-bonds between cationic coordination cages and chloride ions. The framework maintained its original structure upon desolvation, which has been established by single-crystal structure analysis. This is the first fully characterized stable porous framework based on coordination cages after desolvation, with a moderately high Brunauer–Emmett–Teller (BET) surface area of 1201 m2 g-1. This work will not only give a light to construct stable porous frameworks based on coordination cages and thus broaden their applications, but will also provide a new avenue to the assembly of other porous materials such as porous organicmore » cages and hydrogen-bonded organic frameworks (HOFs) through non covalent bonds.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ofek, Y.
1994-05-01
This work describes a new technique, based on exchanging control signals between neighboring nodes, for constructing a stable and fault-tolerant global clock in a distributed system with an arbitrary topology. It is shown that it is possible to construct a global clock reference with time step that is much smaller than the propagation delay over the network's links. The synchronization algorithm ensures that the global clock tick' has a stable periodicity, and therefore, it is possible to tolerate failures of links and clocks that operate faster and/or slower than nominally specified, as well as hard failures. The approach taken inmore » this work is to generate a global clock from the ensemble of the local transmission clocks and not to directly synchronize these high-speed clocks. The steady-state algorithm, which generates the global clock, is executed in hardware by the network interface of each node. At the network interface, it is possible to measure accurately the propagation delay between neighboring nodes with a small error or uncertainty and thereby to achieve global synchronization that is proportional to these error measurements. It is shown that the local clock drift (or rate uncertainty) has only a secondary effect on the maximum global clock rate. The synchronization algorithm can tolerate any physical failure. 18 refs.« less
NASA Astrophysics Data System (ADS)
Arsenault, Louis-François; Neuberg, Richard; Hannah, Lauren A.; Millis, Andrew J.
2017-11-01
We present a supervised machine learning approach to the inversion of Fredholm integrals of the first kind as they arise, for example, in the analytic continuation problem of quantum many-body physics. The approach provides a natural regularization for the ill-conditioned inverse of the Fredholm kernel, as well as an efficient and stable treatment of constraints. The key observation is that the stability of the forward problem permits the construction of a large database of outputs for physically meaningful inputs. Applying machine learning to this database generates a regression function of controlled complexity, which returns approximate solutions for previously unseen inputs; the approximate solutions are then projected onto the subspace of functions satisfying relevant constraints. Under standard error metrics the method performs as well or better than the Maximum Entropy method for low input noise and is substantially more robust to increased input noise. We suggest that the methodology will be similarly effective for other problems involving a formally ill-conditioned inversion of an integral operator, provided that the forward problem can be efficiently solved.
NASA Astrophysics Data System (ADS)
Zou, Hai-Long; Yu, Zu-Guo; Anh, Vo; Ma, Yuan-Lin
2018-05-01
In recent years, researchers have proposed several methods to transform time series (such as those of fractional Brownian motion) into complex networks. In this paper, we construct horizontal visibility networks (HVNs) based on the -stable Lévy motion. We aim to study the relations of multifractal and Laplacian spectrum of transformed networks on the parameters and of the -stable Lévy motion. First, we employ the sandbox algorithm to compute the mass exponents and multifractal spectrum to investigate the multifractality of these HVNs. Then we perform least squares fits to find possible relations of the average fractal dimension , the average information dimension and the average correlation dimension against using several methods of model selection. We also investigate possible dependence relations of eigenvalues and energy on , calculated from the Laplacian and normalized Laplacian operators of the constructed HVNs. All of these constructions and estimates will help us to evaluate the validity and usefulness of the mappings between time series and networks, especially between time series of -stable Lévy motions and HVNs.
Overview: Experimental studies of crystal nucleation: Metals and colloids.
Herlach, Dieter M; Palberg, Thomas; Klassen, Ina; Klein, Stefan; Kobold, Raphael
2016-12-07
Crystallization is one of the most important phase transformations of first order. In the case of metals and alloys, the liquid phase is the parent phase of materials production. The conditions of the crystallization process control the as-solidified material in its chemical and physical properties. Nucleation initiates the crystallization of a liquid. It selects the crystallographic phase, stable or meta-stable. Its detailed knowledge is therefore mandatory for the design of materials. We present techniques of containerless processing for nucleation studies of metals and alloys. Experimental results demonstrate the power of these methods not only for crystal nucleation of stable solids but in particular also for investigations of crystal nucleation of metastable solids at extreme undercooling. This concerns the physical nature of heterogeneous versus homogeneous nucleation and nucleation of phases nucleated under non-equilibrium conditions. The results are analyzed within classical nucleation theory that defines the activation energy of homogeneous nucleation in terms of the interfacial energy and the difference of Gibbs free energies of solid and liquid. The interfacial energy acts as barrier for the nucleation process. Its experimental determination is difficult in the case of metals. In the second part of this work we therefore explore the potential of colloidal suspensions as model systems for the crystallization process. The nucleation process of colloids is observed in situ by optical observation and ultra-small angle X-ray diffraction using high intensity synchrotron radiation. It allows an unambiguous discrimination of homogeneous and heterogeneous nucleation as well as the determination of the interfacial free energy of the solid-liquid interface. Our results are used to construct Turnbull plots of colloids, which are discussed in relation to Turnbull plots of metals and support the hypothesis that colloids are useful model systems to investigate crystal nucleation.
Autonomous orientation predicts longevity: New findings from the Nun Study.
Weinstein, Netta; Legate, Nicole; Ryan, William S; Hemmy, Laura
2018-03-10
Work on longevity has found protective social, cognitive, and emotional factors, but to date we have little understanding of the impact of motivational dynamics. Autonomy orientation, or stable patterns of self-regulation, is theorized to be a protective factor for long-term mental and physical health (Ryan & Deci, 2017), and it is therefore a prime candidate for examining how stable psychosocial factors are linked to longevity, or life expectancy. Essays written in the 1930s by participants in the Nun Study were coded for indicators of an autonomy orientation. These were selected in line with an extensive theoretical literature based in self-determination theory (Deci & Ryan, 1985). Essays were coded for the propensity for choice in action, susceptibility to pressure, self-reflection, integration of experiences, and parental support for autonomy. These coded variables were used to predict age of death. Using 176 codable essays provided by now-deceased participants, linear regression analyses revealed that choiceful behavior, self-reflection, and parent autonomy support predicted age of death. Participants who demonstrated these stable and beneficial motivational characteristics lived longer. Personality constructs reflecting a healthy form of self-regulation are associated with long-term health. Implications for health interventions are discussed. © 2018 The Authors. Journal of Personality Published by Wiley Periodicals, Inc.
NASA Astrophysics Data System (ADS)
Hoehn, Jessica R.; Finkelstein, Noah D.
2018-06-01
As part of a research study on student reasoning in quantum mechanics, we examine students' use of ontologies, or the way students' categorically organize entities they are reasoning about. In analyzing three episodes of focus group discussions with modern physics students, we present evidence of the dynamic nature of ontologies, and refine prior theoretical frameworks for thinking about dynamic ontologies. We find that in a given reasoning episode ontologies can be dynamic in construction (referring to when the reasoner constructs the ontologies) or application (referring to which ontologies are applied in a given reasoning episode). In our data, we see instances of students flexibly switching back and forth between parallel stable structures as well as constructing and negotiating new ontologies in the moment. Methodologically, we use a collective conceptual blending framework as an analytic tool for capturing student reasoning in groups. In this research, we value the messiness of student reasoning and argue that reasoning in a tentative manner can be productive for students learning quantum mechanics. As such, we shift away from a binary view of student learning which sees students as either having the correct answer or not.
NASA Astrophysics Data System (ADS)
Kirschmeier, Benjamin; Summerour, Jacob; Bryant, Matthew
2017-04-01
Interest in clean, stable, and renewable energy harvesting devices has increased dramatically with the volatility of petroleum markets. Specifically, research in aero/hydro kinetic devices has created numerous new horizontal and vertical axis wind turbines, and oscillating wing turbines. Oscillating wing turbines (OWTs) differ from their wind turbine cousins by having a rectangular swept area compared to a circular swept area. The OWT systems also possess a lower tip speed that reduces the overall noise produced by the system. OWTs have undergone significant computational analysis to uncover the underlying flow physics that can drive the system to high efficiencies for single wing oscillations. When two of these devices are placed in tandem configuration, i.e. one placed downstream of the other, they either can constructively or destructively interact. When constructive interactions occurred, they enhance the system efficiency to greater than that of two devices on their own. A new experimental design investigates the dependency of interaction modes on the pitch stiffness of the downstream wing. The experimental results demonstrated that interaction modes are functions of convective time scale and downstream wing pitch stiffness. Heterogeneous combinations of pitch stiffness exhibited constructive and destructive lock-in phenomena whereas the homogeneous combination exhibited only destructive interactions.
Gupta-Bleuler Quantization of the Maxwell Field in Globally Hyperbolic Space-Times
NASA Astrophysics Data System (ADS)
Finster, Felix; Strohmaier, Alexander
2015-08-01
We give a complete framework for the Gupta-Bleuler quantization of the free electromagnetic field on globally hyperbolic space-times. We describe one-particle structures that give rise to states satisfying the microlocal spectrum condition. The field algebras in the so-called Gupta-Bleuler representations satisfy the time-slice axiom, and the corresponding vacuum states satisfy the microlocal spectrum condition. We also give an explicit construction of ground states on ultrastatic space-times. Unlike previous constructions, our method does not require a spectral gap or the absence of zero modes. The only requirement, the absence of zero-resonance states, is shown to be stable under compact perturbations of topology and metric. Usual deformation arguments based on the time-slice axiom then lead to a construction of Gupta-Bleuler representations on a large class of globally hyperbolic space-times. As usual, the field algebra is represented on an indefinite inner product space, in which the physical states form a positive semi-definite subspace. Gauge transformations are incorporated in such a way that the field can be coupled perturbatively to a Dirac field. Our approach does not require any topological restrictions on the underlying space-time.
DOT National Transportation Integrated Search
2014-04-01
Bridges are constructed in stages as pilings, : columns, girders, decks, and other components : are added. At each stage, the structure must be : stable. Girders, which add significant weight to : the developing structure, rest on elastomeric : beari...
Zhang, Wanguang; Lei, Qiongye; Li, Zhengkui; Han, Huayang
2016-02-01
Slightly polluted water has become one of the main sources of nitrogen contaminants in recent years, for which constructed wetlands (CW) is a typical and efficient treatment. However, the knowledge about contribution of individual nitrogen removal pathways and nitrogen balance in constructed wetlands is still limited. In this study, a stable-isotope-addition experiment was performed in laboratory-scale constructed wetlands treating slightly polluted water to determine quantitative contribution of different pathways and temporal variation of nitrogen balance using Na(15)NO3 as tracer. Microbial conversion and substrate retention were found to be the dominant pathways in nitrogen removal contributing 24.4-79.9 and 8.9-70.7 %, respectively, while plant contributed only 4.6-11.1 % through direct assimilation but promoted the efficiency of other pathways. In addition, microbial conversion became the major way to remove N whereas nitrogen retained in substrate at first was gradually released to be utilized by microbes and plants over time. The findings indicated that N2 emission representing microbial conversion was not only the major but also permanent nitrogen removal process, thus keeping a high efficiency of microbial conversion is important for stable and efficient nitrogen removal in constructed wetlands.
Locally optimal transfer trajectories between libration point orbits using invariant manifolds
NASA Astrophysics Data System (ADS)
Davis, Kathryn E.
2009-12-01
Techniques from dynamical systems theory and primer vector theory have been applied to the construction of locally optimal transfer trajectories between libration point orbits. When two libration point orbits have different energies, it has been found that the unstable manifold of the first orbit can be connected to the stable manifold of the second orbit with a bridging trajectory. A bounding sphere centered on the secondary, with a radius less than the radius of the sphere of influence of the secondary, was used to study the stable and unstable manifold trajectories. It was numerically demonstrated that within the bounding sphere, the two-body parameters of the unstable and stable manifold trajectories could be analyzed to locate low transfer costs. It was shown that as the two-body parameters of an unstable manifold trajectory more closely matched the two-body parameters of a stable manifold trajectory, the total DeltaV necessary to complete the transfer decreased. Primer vector theory was successfully applied to a transfer to determine the optimal maneuvers required to create the bridging trajectory that connected the unstable manifold of the first orbit to the stable manifold of the second orbit. Transfer trajectories were constructed between halo orbits in the Sun-Earth and Earth-Moon three-body systems. Multiple solutions were found between the same initial and final orbits, where certain solutions retraced interior portions of the trajectory. All of the trajectories created satisfied the conditions for optimality. The costs of transfers constructed using invariant manifolds were compared to the costs of transfers constructed without the use of invariant manifolds, when data was available. In all cases, the total cost of the transfers were significantly lower when invariant manifolds were used in the transfer construction. In many cases, the transfers that employed invariant manifolds were three to four times more efficient, in terms of fuel expenditure, than the transfer that did not. The decrease in transfer cost was accompanied by an increase in transfer time of flight. Transfers constructed in the Earth-Moon system were shown to be particularly viable for lunar navigation and communication constellations, as excellent coverage of the lunar surface can be achieved during the transfer.
Functional or constructive attitudes: Which type drives consumers' evaluation of meat products?
Hamlin, Robert
2016-07-01
Consumer attitudes towards meat can be divided up into two types: Functional attitudes which are stable and exist over long periods of time, and constructive attitudes which are ephemeral and usually constructed at the point of sale. This research investigated the temporal and situational stability of meat consumers' attitudes by using the same established functional, multidimensional attitude instrument to generate attitude profiles for the four meat types: chicken/beef/lamb/poultry both as an abstracted construct and as a cue on a range of meat and meat-based products. The results showed that strong attitude profile was generated by the meat types as abstracted constructs, but that this profile broke down completely when the food products carrying the same meat types were evaluated. This result indicates that consumer attitudes may not be temporally or situationally stable, which in turn suggests that consumers' evaluation and choice of meat products may be driven to a greater or lesser extent by constructive rather than functional attitudes. Copyright © 2016 Elsevier Ltd. All rights reserved.
[Establishment of RAW264.7 cell strain stably expressing RFP-GFP-LC3].
Wang, Wan; Zhang, Qing; Zhao, Runpeng; Xu, Xuewei; Xing, Yingru; Zhang, Rongbo; Wu, Jing; Hu, Dong
2015-09-01
To establish murine macrophage RAW264.7 cell strain with stable expression of red fluorescent protein-green fluorescent protein-microtubule associated protein light chain 3 (RFP-GFP-LC3). A lentiviral vector containing RFP-GFP-LC3 gene was constructed and then packaged in HEK293T cells with the packaging plasmids. The viral supernatant was collected to infect RAW264.7 cells. The RAW264.7 cell strain with stable expression of RFP-GFP-LC3 was screened with puromycin and analyzed with flow cytometry and fluorescent microscopy for infection efficiency. The number of RFP-GFP-LC3 puncta was observed using florescence microscopy following starvation treatment. The recombinant lentivirus pLV-CMV-RFP-GFP-LC3 was successfully constructed. The RAW264.7 cells with stable expression of RFP-GFP-LC3 were obtained by viral infection and puromycin screening. Fluorescent microscopy and flow cytometry demonstrated the expression rates of RFP and GFP reached to 100%. The number of autophagic puncta significantly increased after starvation treatment. The RAW264.7 cell strain with stable expression of RFP-GFP-LC3 has been successfully constructed, which provides a reliable cellular platform for autophagy research.
NASA Astrophysics Data System (ADS)
Arshad, Muhammad; Seadawy, Aly R.; Lu, Dianchen
2018-01-01
In mono-mode optical fibers, the higher order non-linear Schrödinger equation (NLSE) describes the propagation of enormously short light pulses. We constructed optical solitons and, solitary wave solutions of higher order NLSE mono-mode optical fibers via employing modified extended mapping method which has important applications in Mathematics and physics. Furthermore, the formation conditions are also given on parameters in which optical bright and dark solitons can exist for this media. The moment of the obtained solutions are also given graphically, that helps to realize the physical phenomena's of this model. The modulation instability analysis is utilized to discuss the model stability, which verifies that all obtained solutions are exact and stable. Many other such types of models arising in applied sciences can also be solved by this reliable, powerful and effective method. The method can also be functional to other sorts of higher order nonlinear problems in contemporary areas of research.
Longitudinal variation in adolescent physical activity patterns and the emergence of tobacco use.
Audrain-McGovern, Janet; Rodriguez, Daniel; Rodgers, Kelli; Cuevas, Jocelyn; Sass, Joseph
2012-07-01
The objective of this investigation was to examine how variation in adolescent physical activity is related to smoking and alternative tobacco use. Adolescents (N = 1,384) completed a self-report survey every 6 months from ages 14- to 18-years old in a prospective study of health behaviors. The 8 waves of data were analyzed using General Growth Mixture Modeling (GGMM) RESULTS: GGMM identified five physical activity trajectories including stable higher (SHPA), decreased (DPA), stable regular (SRPA), curvilinear (CPA), and stable low (SLPA). Across 4 years, the likelihood of smoking was greater among adolescents in the DPA, SLPA and SRPA trajectories compared to adolescents belonging to the SHPA trajectory. Alternative tobacco use was greatest among adolescents in the DPA and SRPA trajectories. Adolescents with decreasing physical activity and even adolescents averaging an hour of physical activity a day (SRPA) are important groups to target for tobacco use prevention and intervention efforts.
Kuijpers, Niels GA; Chroumpi, Soultana; Vos, Tim; Solis-Escalante, Daniel; Bosman, Lizanne; Pronk, Jack T; Daran, Jean-Marc; Daran-Lapujade, Pascale
2013-01-01
In vivo assembly of overlapping fragments by homologous recombination in Saccharomyces cerevisiae is a powerful method to engineer large DNA constructs. Whereas most in vivo assembly methods reported to date result in circular vectors, stable integrated constructs are often preferred for metabolic engineering as they are required for large-scale industrial application. The present study explores the potential of combining in vivo assembly of large, multigene expression constructs with their targeted chromosomal integration in S. cerevisiae. Combined assembly and targeted integration of a ten-fragment 22-kb construct to a single chromosomal locus was successfully achieved in a single transformation process, but with low efficiency (5% of the analyzed transformants contained the correctly assembled construct). The meganuclease I-SceI was therefore used to introduce a double-strand break at the targeted chromosomal locus, thus to facilitate integration of the assembled construct. I-SceI-assisted integration dramatically increased the efficiency of assembly and integration of the same construct to 95%. This study paves the way for the fast, efficient, and stable integration of large DNA constructs in S. cerevisiae chromosomes. PMID:24028550
NASA Astrophysics Data System (ADS)
Gates, David
2013-10-01
The QUAsi-Axisymmetric Research (QUASAR) stellarator is a new facility which can solve two critical problems for fusion, disruptions and steady-state, and which provides new insights into the role of magnetic symmetry in plasma confinement. If constructed it will be the only quasi-axisymmetric stellarator in the world. The innovative principle of quasi-axisymmetry (QA) will be used in QUASAR to study how ``tokamak-like'' systems can be made: 1) Disruption-free, 2) Steady-state with low recirculating power, while preserving or improving upon features of axisymmetric tokamaks, such as 1) Stable at high pressure simultaneous with 2) High confinement (similar to tokamaks), and 3) Scalable to a compact reactor Stellarator research is critical to fusion research in order to establish the physics basis for a magnetic confinement device that can operate efficiently in steady-state, without disruptions at reactor-relevant parameters. The two large stellarator experiments - LHD in Japan and W7-X under construction in Germany are pioneering facilities capable of developing 3D physics understanding at large scale and for very long pulses. The QUASAR design is unique in being QA and optimized for confinement, stability, and moderate aspect ratio (4.5). It projects to a reactor with a major radius of ~8 m similar to advanced tokamak concepts. It is striking that (a) the EU DEMO is a pulsed (~2.5 hour) tokamak with major R ~ 9 m and (b) the ITER physics scenarios do not presume steady-state behavior. Accordingly, QUASAR fills a critical gap in the world stellarator program. This work supported by DoE Contract No. DEAC02-76CH03073.
Reduced order modeling of fluid/structure interaction.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Barone, Matthew Franklin; Kalashnikova, Irina; Segalman, Daniel Joseph
2009-11-01
This report describes work performed from October 2007 through September 2009 under the Sandia Laboratory Directed Research and Development project titled 'Reduced Order Modeling of Fluid/Structure Interaction.' This project addresses fundamental aspects of techniques for construction of predictive Reduced Order Models (ROMs). A ROM is defined as a model, derived from a sequence of high-fidelity simulations, that preserves the essential physics and predictive capability of the original simulations but at a much lower computational cost. Techniques are developed for construction of provably stable linear Galerkin projection ROMs for compressible fluid flow, including a method for enforcing boundary conditions that preservesmore » numerical stability. A convergence proof and error estimates are given for this class of ROM, and the method is demonstrated on a series of model problems. A reduced order method, based on the method of quadratic components, for solving the von Karman nonlinear plate equations is developed and tested. This method is applied to the problem of nonlinear limit cycle oscillations encountered when the plate interacts with an adjacent supersonic flow. A stability-preserving method for coupling the linear fluid ROM with the structural dynamics model for the elastic plate is constructed and tested. Methods for constructing efficient ROMs for nonlinear fluid equations are developed and tested on a one-dimensional convection-diffusion-reaction equation. These methods are combined with a symmetrization approach to construct a ROM technique for application to the compressible Navier-Stokes equations.« less
Physics Goals for the Planned Next Linear Collider Engineering Test Facility
NASA Astrophysics Data System (ADS)
Raubenheimer, T. O.
2001-10-01
The Next Linear Collider (NLC) Collaboration is planning to construct an Engineering Test Facility (ETF) at Fermilab. As presently envisioned, the ETF would comprise a fundamental unit of the NLC main linac to include X-band klystrons and modulators, a delay-line power-distribution system (DLDS), and NLC accelerating structures that serve as loads. The principal purpose of the ETF is to validate stable operation of the power-distribution system, first without beam, then with a beam having the NLC pulse structure. This paper concerns the possibility of configuring and using the ETF to accelerate beam with an NLC pulse structure, as well as of doing experiments to measure beam-induced wakefields in the rf structures and their influence back on the beam.
Biologically inspired adaptive walking of a quadruped robot.
Kimura, Hiroshi; Fukuoka, Yasuhiro; Cohen, Avis H
2007-01-15
We describe here the efforts to induce a quadruped robot to walk with medium-walking speed on irregular terrain based on biological concepts. We propose the necessary conditions for stable dynamic walking on irregular terrain in general, and we design the mechanical and the neural systems by comparing biological concepts with those necessary conditions described in physical terms. PD-controller at joints constructs the virtual spring-damper system as the viscoelasticity model of a muscle. The neural system model consists of a central pattern generator (CPG), reflexes and responses. We validate the effectiveness of the proposed neural system model control using the quadruped robots called 'Tekken1&2'. MPEG footage of experiments can be seen at http://www.kimura.is.uec.ac.jp.
Periodic and quasiperiodic revivals in periodically driven interacting quantum systems
NASA Astrophysics Data System (ADS)
Luitz, David J.; Lazarides, Achilleas; Bar Lev, Yevgeny
2018-01-01
Recently it has been shown that interparticle interactions generically destroy dynamical localization in periodically driven systems, resulting in diffusive transport and heating. In this Rapid Communication we rigorously construct a family of interacting driven systems which are dynamically localized and effectively decoupled from the external driving potential. We show that these systems exhibit tunable periodic or quasiperiodic revivals of the many-body wave function and thus of all physical observables. By numerically examining spinless fermions on a one-dimensional lattice we show that the analytically obtained revivals of such systems remain stable for finite systems with open boundary conditions while having a finite lifetime in the presence of static spatial disorder. We find this lifetime to be inversely proportional to the disorder strength.
Stable-isotope analysis: a neglected tool for placing parasites in food webs.
Sabadel, A J M; Stumbo, A D; MacLeod, C D
2018-02-28
Parasites are often overlooked in the construction of food webs, despite their ubiquitous presence in almost every type of ecosystem. Researchers who do recognize their importance often struggle to include parasites using classical food-web theory, mainly due to the parasites' multiple hosts and life stages. A novel approach using compound-specific stable-isotope analysis promises to provide considerable insight into the energetic exchanges of parasite and host, which may solve some of the issues inherent in incorporating parasites using a classical approach. Understanding the role of parasites within food webs, and tracing the associated biomass transfers, are crucial to constructing new models that will expand our knowledge of food webs. This mini-review focuses on stable-isotope studies published in the past decade, and introduces compound-specific stable-isotope analysis as a powerful, but underutilized, newly developed tool that may answer many unresolved questions regarding the role of parasites in food webs.
Construct Validation of the Piers-Harris Children's Self Concept Scale.
ERIC Educational Resources Information Center
Franklin, Melvin R., Jr.; And Others
1981-01-01
Results indicated that the Piers-Harris Children's Self Concept Scale demonstrates both convergent and discriminant validity in an assessment of a relatively stable and internally consistent construct. (Author/BW)
Litrownik, Alan J.; Newton, Rae R.; Davis, Inger P.
2016-01-01
Objective This study aimed to identify children’s long-term placement trajectories following early child welfare involvement and the association of these trajectories with subsequent physical and behavioral well-being. Method Participants were 330 children who entered out-of-home care following a substantiated report of child abuse or neglect during infancy/early childhood and their caregivers. Participants were interviewed at child ages 4 and 12 years to assess children’s physical and behavioral well-being and every 2 years in between to determine child placements. Results Latent Class Analyses identified four stable placement trajectories (i.e., adopted [32%], kinship care [15%], stable reunified [27%], and stable foster care [9%]), and two unstable trajectories (i.e., disrupted reunified [12%] and unstable foster care [5%]). Logistic regressions revealed that children in the unstable trajectories had significantly poorer physical and behavioral well-being than children in stable trajectories. Conclusions and Relevance Maltreated children placed in out-of-home care are at risk for long-term placement instability and poorer physical and behavioral well-being. PMID:25834181
On the classification of the spectrally stable standing waves of the Hartree problem
NASA Astrophysics Data System (ADS)
Georgiev, Vladimir; Stefanov, Atanas
2018-05-01
We consider the fractional Hartree model, with general power non-linearity and arbitrary spatial dimension. We construct variationally the "normalized" solutions for the corresponding Choquard-Pekar model-in particular a number of key properties, like smoothness and bell-shapedness are established. As a consequence of the construction, we show that these solitons are spectrally stable as solutions to the time-dependent Hartree model. In addition, we analyze the spectral stability of the Moroz-Van Schaftingen solitons of the classical Hartree problem, in any dimensions and power non-linearity. A full classification is obtained, the main conclusion of which is that only and exactly the "normalized" solutions (which exist only in a portion of the range) are spectrally stable.
Stable reflexive sheaves of degree zero on Calabi-Yau manifolds
NASA Astrophysics Data System (ADS)
Nakashima, Tohru
2017-11-01
We give sufficient conditions for the existence of μ-stable reflexive sheaves E on a Calabi-Yau threefold such that the first Chern classes c1(E) satisfy c1(E) ṡH2 = 0 for some ample line bundle H. We also prove a result concerning deformations to construct rank two μ-stable sheaves on arbitrary smooth projective varieties.
NASA Astrophysics Data System (ADS)
Yang, T.; Wang, L.
A numerical study is made on the fully developed bifurcation structure and stability of forced convection in a rotating curved duct of square cross-section. Solution structure is determined as variation of a parameter that indicates the effect of rotation (Coriolis-force-driven multiplicity). Three solutions for the flows in a stationary curved duct obtained in the work of Yang and Wang [1] are used as initial solutions of continuation calculations to unfold the solution branches. Twenty-one solution branches are found comparing with five obtained by Selmi and Nandakumar [2]. Dynamic responses of the multiple solutions to finite random disturbances are examined by the direct transient computation. Results show that characteristics of physically realizable fully developed flows changes significantly with variation of effect of rotation. Fourteen sub-ranges are identified according to characteristics of physically realizable solutions. As rotation effect changes, possible physically realizable fully-developed flows can be stable steady 2-cell state, stable multi-cell state, temporal periodic oscillation between symmetric/asymmetric 2-cell/4-cell flows, temporal oscillation with intermittency, temporal chaotic oscillation and temporal oscillation with pseudo intermittency. Among these possible physically realizable fully developed flows, stable multi-cell state and stable steady 2-cell state exist as dual stable. And oscillation with pseudo intermittency is a new phenomenon. In addition to the temporal oscillation with intermittency, sudden shift from stationary stable solution to temporal chaotic oscillation is identified to be another way of onset of chaos.
What Do We Mean by Physician Wellness? A Systematic Review of Its Definition and Measurement.
Brady, Keri J S; Trockel, Mickey T; Khan, Christina T; Raj, Kristin S; Murphy, Mary Lou; Bohman, Bryan; Frank, Erica; Louie, Alan K; Roberts, Laura Weiss
2018-02-01
Physician wellness (well-being) is recognized for its intrinsic importance and impact on patient care, but it is a construct that lacks conceptual clarity. The authors conducted a systematic review to characterize the conceptualization of physician wellness in the literature by synthesizing definitions and measures used to operationalize the construct. A total of 3057 references identified from PubMed, Web of Science, and a manual reference check were reviewed for studies that quantitatively assessed the "wellness" or "well-being" of physicians. Definitions of physician wellness were thematically synthesized. Measures of physician wellness were classified based on their dimensional, contextual, and valence attributes, and changes in the operationalization of physician wellness were assessed over time (1989-2015). Only 14% of included papers (11/78) explicitly defined physician wellness. At least one measure of mental, social, physical, and integrated well-being was present in 89, 50, 49, and 37% of papers, respectively. The number of papers operationalizing physician wellness using integrated, general-life well-being measures (e.g., meaning in life) increased [X 2 = 5.08, p = 0.02] over time. Changes in measurement across mental, physical, and social domains remained stable over time. Conceptualizations of physician wellness varied widely, with greatest emphasis on negative moods/emotions (e.g., burnout). Clarity and consensus regarding the conceptual definition of physician wellness is needed to advance the development of valid and reliable physician wellness measures, improve the consistency by which the construct is operationalized, and increase comparability of findings across studies. To guide future physician wellness assessments and interventions, the authors propose a holistic definition.
Constructing temporary sampling platforms for hydrologic studies
Manuel H. Martinez; Sandra E. Ryan
2000-01-01
This paper presents instructions for constructing platforms that span the width of stream channels to accommodate the measurement of hydrologic parameters over a wide range of discharges. The platforms provide a stable, safe, noninvasive, easily constructed, and relatively inexpensive means for permitting data collection without wading in the flow. We have used the...
Longitudinal Variation in Adolescent Physical Activity Patterns and the Emergence of Tobacco Use
Rodriguez, Daniel; Rodgers, Kelli; Cuevas, Jocelyn; Sass, Joseph
2012-01-01
Objective The objective of this investigation was to examine how variation in adolescent physical activity is related to smoking and alternative tobacco use. Methods Adolescents (N = 1,384) completed a self-report survey every 6 months from ages 14- to 18-years old in a prospective study of health behaviors. The 8 waves of data were analyzed using General Growth Mixture Modeling (GGMM) Results GGMM identified five physical activity trajectories including stable higher (SHPA), decreased (DPA), stable regular (SRPA), curvilinear (CPA), and stable low (SLPA). Across 4 years, the likelihood of smoking was greater among adolescents in the DPA, SLPA and SRPA trajectories compared to adolescents belonging to the SHPA trajectory. Alternative tobacco use was greatest among adolescents in the DPA and SRPA trajectories. Conclusions Adolescents with decreasing physical activity and even adolescents averaging an hour of physical activity a day (SRPA) are important groups to target for tobacco use prevention and intervention efforts. PMID:22408052
Studies of uranium-sodium suspensions. Part I. Construction and operation of experimental loop
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bett, F L; Hilditch, R J; Mepham, R G
1961-08-01
An experimnental uranium- sodium suspension loop was operated for 4320 hr. The design, construction, commissioning, and operation of the loop to the point where a comnplete stable suspension was obtained is described.
Quality assessment of geogrids used for subgrade treatment.
DOT National Transportation Integrated Search
2012-12-01
Geogrid reinforcements have been used by the Indiana Department of Transportation (INDOT) to construct stable subgrade foundations : and to provide a working platform for construction over weak and soft soils. Use of geogrid reinforcement in a paveme...
The morphology and chronology of a landslide near Dillon Dam, Dillon, Colorado
Wahlstrom, E.E.; Nichols, T.C.
1969-01-01
Investigations were made of a landslide at the Dillon Dam site, Dillon, Colo., that included detailed laboratory and field analyses of the mineralogy, chemistry, and physical properties of landslide materials and the bedrock formations from which they were derived. These investigations provide an understanding of the relative importance of various factors contributing to the origin and reactivation of a landslide in overburden resting on the Morrison Formation. The landslide material consists dominantly of an aggregate of large to small angular fragments of quartzite and sandstone from the Dakota Formation, embedded in a matrix of very fine grained to colloidal clayey substances derived mainly from the upper, noncalcareous portion of the Morrison Formation. During construction of Dillon Dam and associated structures, excavation of the toe of an old, relatively stable landslide adjacent to the left abutment caused renewed movement that threatened engulfment of the intake structure at the portal of the diversion tunnel for the reservoir. Remedial measures included excavation of a large volume of the landslide material and construction of a gravel-fill coffer- dam on bedrock at the toe of the landslide. ?? 1969.
Class of regular bouncing cosmologies
NASA Astrophysics Data System (ADS)
Vasilić, Milovan
2017-06-01
In this paper, I construct a class of everywhere regular geometric sigma models that possess bouncing solutions. Precisely, I show that every bouncing metric can be made a solution of such a model. My previous attempt to do so by employing one scalar field has failed due to the appearance of harmful singularities near the bounce. In this work, I use four scalar fields to construct a class of geometric sigma models which are free of singularities. The models within the class are parametrized by their background geometries. I prove that, whatever background is chosen, the dynamics of its small perturbations is classically stable on the whole time axis. Contrary to what one expects from the structure of the initial Lagrangian, the physics of background fluctuations is found to carry two tensor, two vector, and two scalar degrees of freedom. The graviton mass, which naturally appears in these models, is shown to be several orders of magnitude smaller than its experimental bound. I provide three simple examples to demonstrate how this is done in practice. In particular, I show that graviton mass can be made arbitrarily small.
Villodas, Miguel T; Litrownik, Alan J; Newton, Rae R; Davis, Inger P
2016-01-01
This study aimed to identify children's long-term placement trajectories following early child welfare involvement and the association of these trajectories with subsequent physical and behavioral well-being. Participants were 330 children who entered out-of-home care following a substantiated report of child abuse or neglect during infancy/early childhood and their caregivers. Participants were interviewed at child ages 4 and 12 years to assess children's physical and behavioral well-being and every 2 years in between to determine child placements. Latent Class Analyses identified four stable placement trajectories (i.e., adopted [32%], kinship care [15%], stable reunified [27%], and stable foster care [9%]), and two unstable trajectories (i.e., disrupted reunified [12%] and unstable foster care [5%]). Logistic regressions revealed that children in the unstable trajectories had significantly poorer physical and behavioral well-being than children in stable trajectories. Maltreated children placed in out-of-home care are at risk for long-term placement instability and poorer physical and behavioral well-being. © The Author 2015. Published by Oxford University Press on behalf of the Society of Pediatric Psychology. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.
Mückley, Thomas; Hoffmeier, Konrad; Klos, Kajetan; Petrovitch, Alexander; von Oldenburg, Geert; Hofmann, Gunther O
2008-03-01
Retrograde intramedullary nailing is an established procedure for tibiotalocalcaneal arthrodesis. The goal of this study was to evaluate the effects of angle-stable locking or compressed angle-stable locking on the initial stability of the nails and on the behavior of the constructs under cyclic loading conditions. Tibiotalocalcaneal arthrodesis was performed in fifteen third-generation synthetic bones and twenty-four fresh-frozen cadaver legs with use of retrograde intramedullary nailing with three different locking modes: a Stryker nail with compressed angle-stable locking, a Stryker nail with angle-stable locking, and a statically locked Biomet nail. Analyses were performed of the initial stability of the specimens (range of motion) and the laxity of the constructs (neutral zone) in dorsiflexion/plantar flexion, varus/valgus, and external rotation/internal rotation. Cyclic testing up to 100,000 cycles was also performed. The range of motion and the neutral zone in dorsiflexion/plantar flexion at specific cycle increments were determined. In both bone models, the intramedullary nails with compressed angle-stable locking and those with angle-stable locking were significantly superior, in terms of a smaller range of motion and neutral zone, to the statically locked nails. The compressed angle-stable nails were superior to the angle-stable nails only in the synthetic bone model, in external/internal rotation. Cyclic testing showed the nails with angle-stable locking and those with compressed angle-stable locking to have greater stability in both models. In the synthetic bone model, compressed angle-stable locking was significantly better than angle-stable locking; in the cadaver bone model, there was no significant difference between these two locking modes. During cyclic testing, five statically locked nails in the cadaver bone model failed, whereas one nail with angle-stable locking and one with compressed angle-stable locking failed. Regardless of the bone model, the nails with angle-stable or compressed angle-stable locking had better initial stability and better stability following cycling than did the nails with static locking.
Physical activity and screen time: trends in U.S. children aged 9-13 years, 2002-2006.
Huhman, Marian; Lowry, Richard; Lee, Sarah M; Fulton, Janet E; Carlson, Susan A; Patnode, Carrie D
2012-05-01
We examined trends of physical activity and screen time among nationally representative samples of children aged 9-13 years to explore whether children overall are becoming less physically active and less likely to be in compliance with screen time recommendations. We analyzed Youth Media Campaign Longitudinal Survey data for trends and demographic patterns of free time and organized physical activity, and hours and minutes of watching television and playing video or computer games. Child-parent dyads for 2002 (N = 3114), 2004 (N = 5177), and 2006 (N = 1200) were analyzed. On the day before the interview, and for free time physical activity in the past week, children reported a significant increase in physical activity from 2002-2006. Screen time levels were stable overall; 76.4% of children met the recommendations of 2 hours or less of daily screen time. Levels of physical activity among U.S. children aged 9-13 years were stable, or levels slightly improved from 2002-2006. Except for some subgroup differences, trends for compliance with screen time recommendations were also stable from 2002-2006 for U.S. children aged 9-13 years.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hoang-Do, Ngoc-Tram; Hoang, Van-Hung; Le, Van-Hoang
2013-05-15
The Feranchuk-Komarov operator method is developed by combining with the Levi-Civita transformation in order to construct analytical solutions of the Schroedinger equation for a two-dimensional exciton in a uniform magnetic field of arbitrary strength. As a result, analytical expressions for the energy of the ground and excited states are obtained with a very high precision of up to four decimal places. Especially, the precision is uniformly stable for the whole range of the magnetic field. This advantage appears due to the consideration of the asymptotic behaviour of the wave-functions in strong magnetic field. The results could be used for variousmore » physical analyses and the method used here could also be applied to other atomic systems.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mackey, Lester; Nachman, Benjamin; Schwartzman, Ariel
Collimated streams of particles produced in high energy physics experiments are organized using clustering algorithms to form jets . To construct jets, the experimental collaborations based at the Large Hadron Collider (LHC) primarily use agglomerative hierarchical clustering schemes known as sequential recombination. We propose a new class of algorithms for clustering jets that use infrared and collinear safe mixture models. These new algorithms, known as fuzzy jets , are clustered using maximum likelihood techniques and can dynamically determine various properties of jets like their size. We show that the fuzzy jet size adds additional information to conventional jet tagging variablesmore » in boosted topologies. Furthermore, we study the impact of pileup and show that with some slight modifications to the algorithm, fuzzy jets can be stable up to high pileup interaction multiplicities.« less
Physics Goals for the Planned Next Linear Collider Engineering Test Facility
DOE Office of Scientific and Technical Information (OSTI.GOV)
Raubenheimer, Tor O
2001-10-02
The Next Linear Collider (NLC) Collaboration is planning to construct an Engineering Test Facility (ETF) at Fermilab. As presently envisioned, the ETF would comprise a fundamental unit of the NLC main linac to include X-band klystrons and modulators, a delay-line power-distribution system (DLDS), and NLC accelerating structures that serve as loads. The principal purpose of the ETF is to validate stable operation of the power-distribution system, first without beam, then with a beam having the NLC pulse structure. This paper concerns the possibility of configuring and using the ETF to accelerate beam with an NLC pulse structure, as well asmore » of doing experiments to measure beam-induced wakefields in the rf structures and their influence back on the beam.« less
Physics goals for the planned next linear collider engineering test facility
DOE Office of Scientific and Technical Information (OSTI.GOV)
Courtlandt L Bohn et al.
2001-06-26
The Next Linear Collider (NLC) Collaboration is planning to construct an Engineering Test Facility (ETF) at Fermilab. As presently envisioned, the ETF would comprise a fundamental unit of the NLC main linac to include X-band klystrons and modulators, a delay-line power-distribution system (DLDS), and NLC accelerating structures that serve as loads. The principal purpose of the ETF is to validate stable operation of the power-distribution system, first without beam, then with a beam having the NLC pulse structure. This paper concerns the possibility of configuring and using the ETF to accelerate beam with an NLC pulse structure, as well asmore » of doing experiments to measure beam-induced wakefields in the rf structures and their influence back on the beam.« less
Physics goals for the planned next linear collider engineering test facility.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bohn, C.; Michelotti, L.; Ostiguy, J.-F.
2001-07-17
The Next Linear Collider (NLC) Collaboration is planning to construct an Engineering Test Facility (ETF) at Fermilab. As presently envisioned, the ETF would comprise a fundamental unit of the NLC main linac to include X-band klystrons and modulators, a delay-line power-distribution system (DLDS), and NLC accelerating structures that serve as loads. The principal purpose of the ETF is to validate stable operation of the power-distribution system, first without beam, then with a beam having the NLC pulse structure. This paper concerns the possibility of configuring and using the ETF to accelerate beam with an NLC pulse structure, as well asmore » of doing experiments to measure beam-induced wakefields in the rf structures and their influence back on the beam.« less
Magnetically charged regular black hole in a model of nonlinear electrodynamics
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ma, Meng-Sen, E-mail: mengsenma@gmail.com
2015-11-15
We obtain a magnetically charged regular black hole in general relativity. The source to the Einstein field equations is nonlinear electrodynamic field in a physically reasonable model of nonlinear electrodynamics (NED). “Physically” here means the NED model is constructed on the basis of three conditions: the Maxwell asymptotic in the weak electromagnetic field limit; the presence of vacuum birefringence phenomenon; and satisfying the weak energy condition (WEC). In addition, we analyze the thermodynamic properties of the regular black hole in two ways. According to the usual black hole thermodynamics, we calculate the heat capacity at constant charge, from which wemore » know the smaller black hole is more stable. We also employ the horizon thermodynamics to discuss the thermodynamic quantities, especially the heat capacity at constant pressure.« less
Mackey, Lester; Nachman, Benjamin; Schwartzman, Ariel; ...
2016-06-01
Collimated streams of particles produced in high energy physics experiments are organized using clustering algorithms to form jets . To construct jets, the experimental collaborations based at the Large Hadron Collider (LHC) primarily use agglomerative hierarchical clustering schemes known as sequential recombination. We propose a new class of algorithms for clustering jets that use infrared and collinear safe mixture models. These new algorithms, known as fuzzy jets , are clustered using maximum likelihood techniques and can dynamically determine various properties of jets like their size. We show that the fuzzy jet size adds additional information to conventional jet tagging variablesmore » in boosted topologies. Furthermore, we study the impact of pileup and show that with some slight modifications to the algorithm, fuzzy jets can be stable up to high pileup interaction multiplicities.« less
Modelling the Diversity of Outer Planetary Systems
NASA Technical Reports Server (NTRS)
Lissauer, Jack J.; Levison, H. F.; Duncan, M. J.; DeVincenzi, Donald L. (Technical Monitor)
1998-01-01
The process of planetary growth is extremely complicated, involving a myriad of physical and chemical processes, many of which are poorly understood. The ultimate configuration that a planetary system attains depends upon the properties of the disk out of which it grew, of the star at the center of the disk and, at least in some cases, of the interstellar environment. In an effort to numerically survey the possible diversity of planetary systems, we have constructed synthetic systems of giant planets and integrated their orbits to determine the dynamical lifetimes and thus the viability of these systems. Our construction algorithm begins with 110 -- 180 planetesimals located between 4 and 40 AU from a one solar mass star; most initial planetesimals have masses several tenths that of Earth. We integrate the orbits of these bodies subject to mutual gravitational perturbations and -as drag for 10(exp 6) - 10(exp 7) years, merging any pair of planetesimals which pass within one-tenth of a Hill Sphere of one another and adding "gas" to embryos larger than 10 Earth masses. Use of such large planetesimal radii provided sufficient damping to prevent the system from excessive dynamical heating. Subsequently, systems were evolved without gas drag, either with the enlarged radii or with more realistic radii. Systems took from a few million years to greater than ten billion years to become stable (10(exp 9) years without mergers of ejections). Some of the systems produced with the enlarged radii closely resemble our outer Solar System. Many systems contained only Uranus-mass objects. Encounters in simulations using realistic radii resulted in ejections, typically leaving only a few planets per system, most of which were on very eccentric orbits. Some of the systems that we constructed were stable for at least a billion years despite undergoing macroscopic orbital changes on much shorter timescales.
Entangled states in quantum mechanics
NASA Astrophysics Data System (ADS)
Ruža, Jānis
2010-01-01
In some circles of quantum physicists, a view is maintained that the nonseparability of quantum systems-i.e., the entanglement-is a characteristic feature of quantum mechanics. According to this view, the entanglement plays a crucial role in the solution of quantum measurement problem, the origin of the “classicality” from the quantum physics, the explanation of the EPR paradox by a nonlocal character of the quantum world. Besides, the entanglement is regarded as a cornerstone of such modern disciplines as quantum computation, quantum cryptography, quantum information, etc. At the same time, entangled states are well known and widely used in various physics areas. In particular, this notion is widely used in nuclear, atomic, molecular, solid state physics, in scattering and decay theories as well as in other disciplines, where one has to deal with many-body quantum systems. One of the methods, how to construct the basis states of a composite many-body quantum system, is the so-called genealogical decomposition method. Genealogical decomposition allows one to construct recurrently by particle number the basis states of a composite quantum system from the basis states of its forming subsystems. These coupled states have a structure typical for entangled states. If a composite system is stable, the internal structure of its forming basis states does not manifest itself in measurements. However, if a composite system is unstable and decays onto its forming subsystems, then the measurables are the quantum numbers, associated with these subsystems. In such a case, the entangled state has a dynamical origin, determined by the Hamiltonian of the corresponding decay process. Possible correlations between the quantum numbers of resulting subsystems are determined by the symmetries-conservation laws of corresponding dynamical variables, and not by the quantum entanglement feature.
ERIC Educational Resources Information Center
Bowler, Earl M., Comp.
America's $100 billion construction industry with its 3 million workers does not need harassment, unwarranted interference, or political denounciation; it does need better access to mortgage money, less costly materials at more stable prices, an end to archaic regulations that hamper productivity, more dynamic management, and--most of all--more…
JPRS Report, East Asia, Southeast Asia
1993-02-16
Boualai Sisomvang [PASASON 23 Nov] 16 National Construction Committee Member, Bounlap Gnoui-vanitsavong; [PASASON 23 Nov] 17 Social Welfare...JPRS-SEA-93-002 16 February 1993 2 Southeast Asia Provincial Committee Member, Khamphai Sou-outhai [PASASON 24 Nov] 20 National Construction ...Indonesian steel industry is increasingly stable. The Indonesian steel industry not only supports the domestic machinery and construction
Perfectionism, Procrastination, and Psychological Distress
ERIC Educational Resources Information Center
Rice, Kenneth G.; Richardson, Clarissa M. E.; Clark, Dustin
2012-01-01
Using a cross-panel design and data from 2 successive cohorts of college students ( N = 357), we examined the stability of maladaptive perfectionism, procrastination, and psychological distress across 3 time points within a college semester. Each construct was substantially stable over time, with procrastination being especially stable. We also…
Effects of Evaluative vs. Co-Constructive Interactions on Learning in Physics
ERIC Educational Resources Information Center
Toczek, Marie-Christine; Morge, Ludovic
2009-01-01
We conducted an experimental study to assess the effects of two physics-learning situations that differed in the type of teacher-student interactions that took place: evaluative or co-constructive. As found in various studies on physics teaching and social psychology, the results showed that co-constructive interactions generated a more effective…
Undergraduate Student Construction and Interpretation of Graphs in Physics Lab Activities
ERIC Educational Resources Information Center
Nixon, Ryan S.; Godfrey, T. J.; Mayhew, Nicholas T.; Wiegert, Craig C.
2016-01-01
Lab activities are an important element of an undergraduate physics course. In these lab activities, students construct and interpret graphs in order to connect the procedures of the lab with an understanding of the related physics concepts. This study investigated undergraduate students' construction and interpretation of graphs with best-fit…
Rational construction of a stable Zn4O-based MOF for highly efficient CO2 capture and conversion.
Zhou, Hui-Fang; Liu, Bo; Hou, Lei; Zhang, Wen-Yan; Wang, Yao-Yu
2018-01-11
By employing a carboxylate ligand derived from benzene-1,4-dicarboxylate, a chemically stable Zn 4 O-based self-penetrating metal-organic framework has been rationally synthesized, which exhibits high CO 2 adsorption and efficient catalytic conversion for CO 2 cycloaddition.
NASA Astrophysics Data System (ADS)
Arif, W.; Suhandi, A.; Kaniawati, I.; Setiawan, A.
2017-02-01
The development of scaffolding for evaluation instrument construction training program on the cognitive domain for senior high school physics teacher and the same level that is specified in the test instrument has been done. This development was motivated by the low ability of the majority of physics teachers in constructing the physics learning achievement test. This situation not in accordance with the demands of Permendiknas RI no. 16 tahun 2007 concerning the standard of academic qualifications and competence of teachers, stating that teachers should have a good ability to develop instruments for assessment and evaluation of process and learning outcomes. Based on the preliminary study results, it can be seen that the main cause of the inability of teachers in developing physics achievement test is because they do not good understand of the indicators for each aspect of cognitive domains. Scaffolding development is done by using the research and development methods formulated by Thiagarajan which includes define, design and develope steps. Develop step includes build the scaffolding, validation of scaffolding by experts and the limited pilot implementations on the training activities. From the build scaffolding step, resulted the scaffolding for the construction of test instruments training program which include the process steps; description of indicators, operationalization of indicators, construction the itemsframework (items scenarios), construction the items stem, construction the items and checking the items. The results of the validation by three validator indicates that the built scaffolding are suitable for use in the construction of physics achievement test training program, especially for novice. The limited pilot implementation of the built scaffolding conducted in training activities attended by 10 senior high school physics teachers in Garut district. The results of the limited pilot implementation shows that the built scaffolding have a medium effectiveness in improving the ability of senior high school physics teachers in constructing the physic achievement test instrument that is characterized by more than 70% of trainees achieve scores of test instruments construction of about 80 or more.
In situ patterned micro 3D liver constructs for parallel toxicology testing in a fluidic device
Skardal, Aleksander; Devarasetty, Mahesh; Soker, Shay; Hall, Adam R
2017-01-01
3D tissue models are increasingly being implemented for drug and toxicology testing. However, the creation of tissue-engineered constructs for this purpose often relies on complex biofabrication techniques that are time consuming, expensive, and difficult to scale up. Here, we describe a strategy for realizing multiple tissue constructs in a parallel microfluidic platform using an approach that is simple and can be easily scaled for high-throughput formats. Liver cells mixed with a UV-crosslinkable hydrogel solution are introduced into parallel channels of a sealed microfluidic device and photopatterned to produce stable tissue constructs in situ. The remaining uncrosslinked material is washed away, leaving the structures in place. By using a hydrogel that specifically mimics the properties of the natural extracellular matrix, we closely emulate native tissue, resulting in constructs that remain stable and functional in the device during a 7-day culture time course under recirculating media flow. As proof of principle for toxicology analysis, we expose the constructs to ethyl alcohol (0–500 mM) and show that the cell viability and the secretion of urea and albumin decrease with increasing alcohol exposure, while markers for cell damage increase. PMID:26355538
In situ patterned micro 3D liver constructs for parallel toxicology testing in a fluidic device.
Skardal, Aleksander; Devarasetty, Mahesh; Soker, Shay; Hall, Adam R
2015-09-10
3D tissue models are increasingly being implemented for drug and toxicology testing. However, the creation of tissue-engineered constructs for this purpose often relies on complex biofabrication techniques that are time consuming, expensive, and difficult to scale up. Here, we describe a strategy for realizing multiple tissue constructs in a parallel microfluidic platform using an approach that is simple and can be easily scaled for high-throughput formats. Liver cells mixed with a UV-crosslinkable hydrogel solution are introduced into parallel channels of a sealed microfluidic device and photopatterned to produce stable tissue constructs in situ. The remaining uncrosslinked material is washed away, leaving the structures in place. By using a hydrogel that specifically mimics the properties of the natural extracellular matrix, we closely emulate native tissue, resulting in constructs that remain stable and functional in the device during a 7-day culture time course under recirculating media flow. As proof of principle for toxicology analysis, we expose the constructs to ethyl alcohol (0-500 mM) and show that the cell viability and the secretion of urea and albumin decrease with increasing alcohol exposure, while markers for cell damage increase.
Effects of substrata and environmental conditions on ecological succession on historic shipwrecks
NASA Astrophysics Data System (ADS)
González-Duarte, Manuel M.; Fernández-Montblanc, Tomás; Bethencourt, Manuel; Izquierdo, Alfredo
2018-01-01
An understanding of the interactions between biological, chemical and physical dynamics is especially important for the adequate conservation of the Underwater Cultural Heritage. However, while physical and chemical processes are relatively well-investigated, the biological communities associated with these habitats are poorly studied. We compared the sessile community developed on panels of different materials placed on two historical shipwrecks, the Fougueux and the Bucentaure, from the Battle of Trafalgar (October 1805). Six materials used at the construction of vessels at the 18th and 19th centuries were selected: copper, brass, cast iron, carbon steel, pine and oak. The sessile community developed on the panels was studied two and 15 months after their immersion at the water to determine the effects of materials and environmental conditions (sediments, waves, hydrodynamic conditions, temperature and salinity) on ecological succession and the possible implications at the conservation of historical shipwrecks. On the Fougueux, the environmental conditions more strongly influenced the biological succession than the material type, with pioneer colonisers dominating the communities in both sampling periods. On the Bucentaure, exposed to more stable environmental conditions, the sessile community showed differences between sampling periods and among materials at the end of the experiment. Under these more stable environmental conditions, the material type showed a higher influence on the sessile community. Species that produce calcareous concretions developed on metallic panels, but were absent on wood panels, where the shipworm Teredo navalis was more abundant. The relationship between environmental conditions, sessile organisms and material type can influence the conservation status of the archaeological sites.
MAGNETAR GIANT FLARES-FLUX ROPE ERUPTIONS IN MULTIPOLAR MAGNETOSPHERIC MAGNETIC FIELDS
DOE Office of Scientific and Technical Information (OSTI.GOV)
Yu Cong, E-mail: cyu@ynao.ac.cn
2012-09-20
We address a primary question regarding the physical mechanism that triggers the energy release and initiates the onset of eruptions in the magnetar magnetosphere. Self-consistent stationary, axisymmetric models of the magnetosphere are constructed based on force-free magnetic field configurations that contain a helically twisted force-free flux rope. Depending on the surface magnetic field polarity, there exist two kinds of magnetic field configurations, inverse and normal. For these two kinds of configurations, variations of the flux rope equilibrium height in response to gradual surface physical processes, such as flux injections and crust motions, are carefully examined. We find that equilibrium curvesmore » contain two branches: one represents a stable equilibrium branch, and the other an unstable equilibrium branch. As a result, the evolution of the system shows a catastrophic behavior: when the magnetar surface magnetic field evolves slowly, the height of the flux rope would gradually reach a critical value beyond which stable equilibriums can no longer be maintained. Subsequently, the flux rope would lose equilibrium and the gradual quasi-static evolution of the magnetosphere will be replaced by a fast dynamical evolution. In addition to flux injections, the relative motion of active regions would give rise to the catastrophic behavior and lead to magnetic eruptions as well. We propose that a gradual process could lead to a sudden release of magnetosphere energy on a very short dynamical timescale, without being initiated by a sudden fracture in the crust of the magnetar. Some implications of our model are also discussed.« less
Mâsse, Louise C; O'Connor, Teresia M; Tu, Andrew W; Hughes, Sheryl O; Beauchamp, Mark R; Baranowski, Tom
2017-06-14
Parents are widely recognized as playing a central role in the development of child behaviors such as physical activity. As there is little agreement as to the dimensions of physical activity-related parenting practices that should be measured or how they should be operationalized, this study engaged experts to develop an integrated conceptual framework for assessing parenting practices that influence multiple aspects of 5 to 12 year old children's participation in physical activity. The ultimate goal of this study is to inform the development of an item bank (repository of calibrated items) aimed at measuring physical activity parenting practices. Twenty four experts from 6 countries (Australia, Canada, England, Scotland, the Netherlands, & United States (US)) sorted 77 physical activity parenting practice concepts identified from our previously published synthesis of the literature (74 measures) and survey of Canadian and US parents. Concept Mapping software was used to conduct the multi-dimensional scaling (MDS) analysis and a cluster analysis of the MDS solution of the Expert's sorting which was qualitatively reviewed and commented on by the Experts. The conceptual framework includes 12 constructs which are presented using three main domains of parenting practices (neglect/control, autonomy support, and structure). The neglect/control domain includes two constructs: permissive and pressuring parenting practices. The autonomy supportive domain includes four constructs: encouragement, guided choice, involvement in child physical activities, and praises/rewards for their child's physical activity. Finally, the structure domain includes six constructs: co-participation, expectations, facilitation, modeling, monitoring, and restricting physical activity for safety or academic concerns. The concept mapping analysis provided a useful process to engage experts in re-conceptualizing physical activity parenting practices and identified key constructs to include in measures of physical activity parenting. While the constructs identified ought to be included in measures of physical activity parenting practices, it will be important to collect data among parents to further validate the content of these constructs. In conclusion, the method provided a roadmap for developing an item bank that captures key facets of physical activity parenting and ultimately serves to standardize how we operationalize measures of physical activity parenting.
NASA Astrophysics Data System (ADS)
Huang, Shih-Chieh Douglas
In this dissertation, I investigate the effects of a grounded learning experience on college students' mental models of physics systems. The grounded learning experience consisted of a priming stage and an instruction stage, and within each stage, one of two different types of visuo-haptic representation was applied: visuo-gestural simulation (visual modality and gestures) and visuo-haptic simulation (visual modality, gestures, and somatosensory information). A pilot study involving N = 23 college students examined how using different types of visuo-haptic representation in instruction affected people's mental model construction for physics systems. Participants' abilities to construct mental models were operationalized through their pretest-to-posttest gain scores for a basic physics system and their performance on a transfer task involving an advanced physics system. Findings from this pilot study revealed that, while both simulations significantly improved participants' mental modal construction for physics systems, visuo-haptic simulation was significantly better than visuo-gestural simulation. In addition, clinical interviews suggested that participants' mental model construction for physics systems benefited from receiving visuo-haptic simulation in a tutorial prior to the instruction stage. A dissertation study involving N = 96 college students examined how types of visuo-haptic representation in different applications support participants' mental model construction for physics systems. Participant's abilities to construct mental models were again operationalized through their pretest-to-posttest gain scores for a basic physics system and their performance on a transfer task involving an advanced physics system. Participants' physics misconceptions were also measured before and after the grounded learning experience. Findings from this dissertation study not only revealed that visuo-haptic simulation was significantly more effective in promoting mental model construction and remedying participants' physics misconceptions than visuo-gestural simulation, they also revealed that visuo-haptic simulation was more effective during the priming stage than during the instruction stage. Interestingly, the effects of visuo-haptic simulation in priming and visuo-haptic simulation in instruction on participants' pretest-to-posttest gain scores for a basic physics system appeared additive. These results suggested that visuo-haptic simulation is effective in physics learning, especially when it is used during the priming stage.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Simunovic, Srdjan; Piro, Markus H.A.
Thermochimica is a software library that determines a unique combination of phases and their compositions at thermochemical equilibrium. Thermochimica can be used for stand-alone calculations or it can be directly coupled to other codes. This release of the software does not have a graphical user interface (GUI) and it can be executed from the command line or from an Application Programming Interface (API). Also, it is not intended for thermodynamic model development or for constructing phase diagrams. The main purpose of the software is to be directly coupled with a multi-physics code to provide material properties and boundary conditions formore » various physical phenomena. Significant research efforts have been dedicated to enhance computational performance through advanced algorithm development, such as improved estimation techniques and non-linear solvers. Various useful parameters can be provided as output from Thermochimica, such as: determination of which phases are stable at equilibrium, the mass of solution species and phases at equilibrium, mole fractions of solution phase constituents, thermochemical activities (which are related to partial pressures for gaseous species), chemical potentials of solution species and phases, and integral Gibbs energy (referenced relative to standard state). The overall goal is to provide an open source computational tool to enhance the predictive capability of multi-physics codes without significantly impeding computational performance.« less
A systematic and efficient method for modeling acoustic response of multilayered media
NASA Astrophysics Data System (ADS)
Feng, Shi-Jin; Chen, Zhang-Long; Chen, Hong-Xin
2017-12-01
A generalized transmission and reflection matrix (GTRM) method for determining the acoustic response of multilayered media is developed in this paper. The principle of the method is to decipher the wave vectors by constructing generalized T/R matrices and recursive formulas. The generalized T/R matrices are introduced to account for the contributions of multiple reflection and transmission in a global manner. Three types of interface T/R matrices are developed to accommodate the coupling between any type of physical medium. This method is not only stable for high-frequency and large thickness cases by excluding the growing terms but also explicitly exhibits the physical mechanism of wave propagation. Acoustic response in both frequency and time domains can be solved by the method. Moreover, the method has a simple framework, and it is easy to be implemented in numerical tools. The method is successfully validated by several typical acoustic problems, including poroelastic medium immersed in fluid, aluminum-glass-aluminum immersed in fluid, and poroelastic sediment sandwiched between water and bedrock. In fact, the present method can be extended to any physical problem of a multilayered structure. When the wave frequency is high or the layered media is greatly thick or the material combination is highly complex, the advantage of the GTRM method is more conspicuous.
A stable Alq3@MOF composite for white-light emission.
Xie, Wei; He, Wen-Wen; Du, Dong-Ying; Li, Shun-Li; Qin, Jun-Sheng; Su, Zhong-Min; Sun, Chun-Yi; Lan, Ya-Qian
2016-02-25
A stable mesoporous blue-emitting MOF NENU-521 was successfully constructed. NENU-521 can serve as a host for encapsulating Alq3 to obtain tunable and efficient white-light emission. The Alq3@NENU-521 composite possesses excellent stability and can be used as a promising white phosphor in WLEDs.
Getting a Picture that Is Both Accurate and Stable: Situation Models and Epistemic Validation
ERIC Educational Resources Information Center
Schroeder, Sascha; Richter, Tobias; Hoever, Inga
2008-01-01
Text comprehension entails the construction of a situation model that prepares individuals for situated action. In order to meet this function, situation model representations are required to be both accurate and stable. We propose a framework according to which comprehenders rely on epistemic validation to prevent inaccurate information from…
Topological Sachdev-Ye-Kitaev model
NASA Astrophysics Data System (ADS)
Zhang, Pengfei; Zhai, Hui
2018-05-01
In this Rapid Communication, we construct a large-N exactly solvable model to study the interplay between interaction and topology, by connecting the Sachdev-Ye-Kitaev (SYK) model with constant hopping. The hopping forms a band structure that can exhibit both topologically trivial and nontrivial phases. Starting from a topologically trivial insulator with zero Hall conductance, we show that the interaction can drive a phase transition to a topologically nontrivial insulator with quantized nonzero Hall conductance, and a single gapless Dirac fermion emerges when the interaction is fine tuned to the critical point. The finite temperature effect is also considered, and we show that the topological phase with a stronger interaction is less stable against temperature. Our model provides a concrete example to illustrate the interacting topological phases and phase transitions, and can shed light on similar problems in physical systems.
Amplitude analysis of resonant production in three pions
DOE Office of Scientific and Technical Information (OSTI.GOV)
Jackura, Andrew; Mikhasenko, Mikhail; Szczepaniak, Adam
2016-11-29
We present some results on the analysis of three pion resonances. The analyses are motivated by the recent release of the largest data set on diffractively produced three pions by the COMPASS collaboration. We construct reaction amplitudes that satisfy fundamentalmore » $S$-matrix principles, which allows the use of models that have physical constraints to be used in fitting data. The models are motivated by the isobar model that satisfy unitarity constraints. The model consist of a Deck production amplitude with which final state interactions are constrained by unitarity. We employ the isobar model where two of the pions form a quasi-stable particle. The analysis is performed in the high-energy, single Regge limit. We specifically discuss the examples of the three pion $$J^{PC}=2^{-+}$$ resonance in the $$\\rho\\pi$$ and $$f_2\\pi$$ channels.« less
Motivation for physical activity in children: a moving matter in need for study.
Pannekoek, Linda; Piek, Jan P; Hagger, Martin S
2013-10-01
Motivation for physical activity in children below the age of 12 years is a largely underrepresented issue in contemporary research. Although engagement in sufficient physical activity is highly important for children's current and later health, relatively little is known of the factors that motivate children to be physically active. Various theories have been developed in an attempt to explain motivation toward physical activity in adults. Recent developments have focussed on integrating constructs of these theories in order to attain a comprehensive account of motivated behavior. The relationships between different motivational constructs have generally been investigated in healthy adolescents and adults. This manuscript outlines why more theoretically driven research into children's motivation toward physical activity is needed. Constructs stemming from various motivational theories and their interrelationship as evidenced in youth and adults will be summarized. The current state of research on the applicability of these motivational constructs to children, and the generalizability of the interrelationship between the constructs to child samples will be outlined. A deeper insight into the motivational determinants of physical activity participation in children could inform the design of interventions to facilitate the development of physically active lifestyles that persist at older ages. Copyright © 2013 Elsevier B.V. All rights reserved.
Physics Metacognition Inventory Part II: Confirmatory factor analysis and Rasch analysis
NASA Astrophysics Data System (ADS)
Taasoobshirazi, Gita; Bailey, MarLynn; Farley, John
2015-11-01
The Physics Metacognition Inventory was developed to measure physics students' metacognition for problem solving. In one of our earlier studies, an exploratory factor analysis provided evidence of preliminary construct validity, revealing six components of students' metacognition when solving physics problems including knowledge of cognition, planning, monitoring, evaluation, debugging, and information management. The college students' scores on the inventory were found to be reliable and related to students' physics motivation and physics grade. However, the results of the exploratory factor analysis indicated that the questionnaire could be revised to improve its construct validity. The goal of this study was to revise the questionnaire and establish its construct validity through a confirmatory factor analysis. In addition, a Rasch analysis was applied to the data to better understand the psychometric properties of the inventory and to further evaluate the construct validity. Results indicated that the final, revised inventory is a valid, reliable, and efficient tool for assessing student metacognition for physics problem solving.
Modelling the Diversity of Outer Planetary Systems. 1; Formation and Evolution
NASA Technical Reports Server (NTRS)
Lissauer, J. J.; Levison, H. F.; Duncan, M. J.; Young, Richard E. (Technical Monitor)
1998-01-01
The process of planetary growth is extremely complicated, involving a myriad of physical and chemical processes, many of which are poorly understood. The ultimate configuration that a planetary system attains depends upon the properties of the disk out of which it grew, of the star at the center of the disk and, at least in some cases, of the interstellar environment. However, this dependence is poorly understood. Thus, in an effort to numerically survey the possible diversity of planetary systems, we have constructed synthetic systems of giant planets and integrated their orbits to determine the dynamical lifetimes and thus the viability of these systems. Our construction algorithm begins with 110 -- 180 planetesimals located between 4 and 40 AU from a one solar mass star; most initial planetesimals have masses several tenths that of Earth. We integrate the orbits of these bodies subject to mutual gravitational perturbations and gas drag for $10^6 - 10^7$ years, merging any pair of planetesimals which passed within one-tenth of a Hill Sphere of one another and adding "gas" to embryos larger than 10 Earth masses. Use of such large planetesimal radii provided sufficient damping to prevent the system from excessive dynamical heating. Subsequently, systems were evolved without gas drag, either with the inflated radii or with more realistic radii. Systems took from a few million years to greater than ten billion years to become stable ($10^9$ years without mergers of ejections). Some of the systems produced with the inflated radii closely resemble our Solar System. Encounters in simulations using realistic radii resulted in ejections, typically leaving only a few planets per system, most of which were in highly eccentric orbits. The structure and dynamics of the resulting "stable" systems is discussed in detail in the abstract by Levison et al.
Alternating direction implicit methods for parabolic equations with a mixed derivative
NASA Technical Reports Server (NTRS)
Beam, R. M.; Warming, R. F.
1980-01-01
Alternating direction implicit (ADI) schemes for two-dimensional parabolic equations with a mixed derivative are constructed by using the class of all A(0)-stable linear two-step methods in conjunction with the method of approximate factorization. The mixed derivative is treated with an explicit two-step method which is compatible with an implicit A(0)-stable method. The parameter space for which the resulting ADI schemes are second-order accurate and unconditionally stable is determined. Some numerical examples are given.
Alternating direction implicit methods for parabolic equations with a mixed derivative
NASA Technical Reports Server (NTRS)
Beam, R. M.; Warming, R. F.
1979-01-01
Alternating direction implicit (ADI) schemes for two-dimensional parabolic equations with a mixed derivative are constructed by using the class of all A sub 0-stable linear two-step methods in conjunction with the method of approximation factorization. The mixed derivative is treated with an explicit two-step method which is compatible with an implicit A sub 0-stable method. The parameter space for which the resulting ADI schemes are second order accurate and unconditionally stable is determined. Some numerical examples are given.
Multi-Dimensional Asymptotically Stable 4th Order Accurate Schemes for the Diffusion Equation
NASA Technical Reports Server (NTRS)
Abarbanel, Saul; Ditkowski, Adi
1996-01-01
An algorithm is presented which solves the multi-dimensional diffusion equation on co mplex shapes to 4th-order accuracy and is asymptotically stable in time. This bounded-error result is achieved by constructing, on a rectangular grid, a differentiation matrix whose symmetric part is negative definite. The differentiation matrix accounts for the Dirichlet boundary condition by imposing penalty like terms. Numerical examples in 2-D show that the method is effective even where standard schemes, stable by traditional definitions fail.
Construction of energy-stable Galerkin reduced order models.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kalashnikova, Irina; Barone, Matthew Franklin; Arunajatesan, Srinivasan
2013-05-01
This report aims to unify several approaches for building stable projection-based reduced order models (ROMs). Attention is focused on linear time-invariant (LTI) systems. The model reduction procedure consists of two steps: the computation of a reduced basis, and the projection of the governing partial differential equations (PDEs) onto this reduced basis. Two kinds of reduced bases are considered: the proper orthogonal decomposition (POD) basis and the balanced truncation basis. The projection step of the model reduction can be done in two ways: via continuous projection or via discrete projection. First, an approach for building energy-stable Galerkin ROMs for linear hyperbolicmore » or incompletely parabolic systems of PDEs using continuous projection is proposed. The idea is to apply to the set of PDEs a transformation induced by the Lyapunov function for the system, and to build the ROM in the transformed variables. The resulting ROM will be energy-stable for any choice of reduced basis. It is shown that, for many PDE systems, the desired transformation is induced by a special weighted L2 inner product, termed the %E2%80%9Csymmetry inner product%E2%80%9D. Attention is then turned to building energy-stable ROMs via discrete projection. A discrete counterpart of the continuous symmetry inner product, a weighted L2 inner product termed the %E2%80%9CLyapunov inner product%E2%80%9D, is derived. The weighting matrix that defines the Lyapunov inner product can be computed in a black-box fashion for a stable LTI system arising from the discretization of a system of PDEs in space. It is shown that a ROM constructed via discrete projection using the Lyapunov inner product will be energy-stable for any choice of reduced basis. Connections between the Lyapunov inner product and the inner product induced by the balanced truncation algorithm are made. Comparisons are also made between the symmetry inner product and the Lyapunov inner product. The performance of ROMs constructed using these inner products is evaluated on several benchmark test cases.« less
Modelling Students' Construction of Energy Models in Physics.
ERIC Educational Resources Information Center
Devi, Roshni; And Others
1996-01-01
Examines students' construction of experimentation models for physics theories in energy storage, transformation, and transfers involving electricity and mechanics. Student problem solving dialogs and artificial intelligence modeling of these processes is analyzed. Construction of models established relations between elements with linear causal…
PREDICTING SUSTAINABLE GROUND WATER TO CONSTRUCTED RIPARIAN WETLANDS: SHAKER TRACE, OHIO, USA
Water isotopy is introduced as a best management practice for the prediction of sustained ground water inflows to prospective constructed wetlands. A primer and application of the stable isotopes, 18O and 2H, are discussed for riparian wetland restoration ar...
AFRL’s ALREST Physics-Based Combustion Stability Program
2012-11-08
enduring challenge because of the inherent complexities in the physics of multiphase turbulent flames. The present paper provides the Air Force...Combustor F i d e l i t y URANS LES Steady RANS HLES Current SOA Capability with 2000 cores Capability at Program End in 2015 (2,000 cores+GPUs) Capability...Unlimited ALREST Validation Cases “Final Exam ” Hydrogen Stable Single Element (PSU) Stable Single Element Methane (Singla) Supercritical Non
ERIC Educational Resources Information Center
Mantyla, Terhi
2012-01-01
In physics teacher education, two central goals are first to learn the structures of physics knowledge, and second the processes of its construction. To know the structure is to know the framework of concepts and laws; to know the processes is to know where the knowledge comes from, how the framework is constructed, and how it can be justified.…
NASA Astrophysics Data System (ADS)
McKenna, Gregory; Yoon, Heedong; Koh, Yung; Simon, Sindee
In the present work, we have produced highly stable amorphous fluoropolymer (Teflon AF® 1600) films to study the calorimetric and relaxation behavior in the deep in the glassy regime. Physical vapor deposition (PVD) was used to produce 110 to 700 nm PVD films with substrate temperature ranging from 0.70 Tg to 0.90 Tg. Fictive temperature (Tf) was measured using Flash DSC with 600 K/s heating and cooling rates. Consistent with prior observations for small molecular weight glasses, large enthalpy overshoots were observed in the stable amorphous Teflon films. The Tf reduction for the stable Teflon films deposited in the vicinity of 0.85 Tg was approximately 70 K compared to the Tgof the rejuvenated system. The relaxation behavior of stable Teflon films was measured using the TTU bubble inflation technique and following Struik's protocol in the temperature range from Tf to Tg. The results show that the relaxation time decreases with increasing aging time implying that devitrification is occurring in this regime.
Influence of fatigue on construction workers’ physical and cognitive function
Zhang, M.; Murphy, L. A.; Fang, D.
2015-01-01
Background Despite scientific evidence linking workers’ fatigue to occupational safety (due to impaired physical or cognitive function), little is known about this relationship in construction workers. Aims To assess the association between construction workers’ reported fatigue and their perceived difficulties with physical and cognitive functions. Methods Using data from a convenience sample of US construction workers participating in the 2010–11 National Health Interview Survey two multivariate weighted logistic regression models were built to predict difficulty with physical and with cognitive functions associated with workers’ reported fatigue, while controlling for age, smoking status, alcohol consumption status, sleep hygiene, psychological distress and arthritis status. Results Of 606 construction workers surveyed, 49% reported being ‘tired some days’ in the past 3 months and 10% reported ‘tired most days or every day’. Compared with those feeling ‘never tired’, workers who felt ‘tired some days’ were significantly more likely to report difficulty with physical function (adjusted odds ratio [AOR] = 2.03; 95% confidence interval [CI] 1.17–3.51) and cognitive function (AOR = 2.27; 95% CI 1.06–4.88) after controlling for potential confounders. Conclusions Our results suggest an association between reported fatigue and experiencing difficulties with physical and cognitive functions in construction workers. PMID:25701835
Fixation, transient landscape, and diffusion dilemma in stochastic evolutionary game dynamics
NASA Astrophysics Data System (ADS)
Zhou, Da; Qian, Hong
2011-09-01
Agent-based stochastic models for finite populations have recently received much attention in the game theory of evolutionary dynamics. Both the ultimate fixation and the pre-fixation transient behavior are important to a full understanding of the dynamics. In this paper, we study the transient dynamics of the well-mixed Moran process through constructing a landscape function. It is shown that the landscape playing a central theoretical “device” that integrates several lines of inquiries: the stable behavior of the replicator dynamics, the long-time fixation, and continuous diffusion approximation associated with asymptotically large population. Several issues relating to the transient dynamics are discussed: (i) multiple time scales phenomenon associated with intra- and inter-attractoral dynamics; (ii) discontinuous transition in stochastically stationary process akin to Maxwell construction in equilibrium statistical physics; and (iii) the dilemma diffusion approximation facing as a continuous approximation of the discrete evolutionary dynamics. It is found that rare events with exponentially small probabilities, corresponding to the uphill movements and barrier crossing in the landscape with multiple wells that are made possible by strong nonlinear dynamics, plays an important role in understanding the origin of the complexity in evolutionary, nonlinear biological systems.
ERIC Educational Resources Information Center
Jaubert, Jean-Noël; Privat, Romain
2014-01-01
The double-tangent construction of coexisting phases is an elegant approach to visualize all the multiphase binary systems that satisfy the equality of chemical potentials and to select the stable state. In this paper, we show how to perform the double-tangent construction of coexisting phases for binary systems modeled with the gamma-phi…
Optimal transfers between unstable periodic orbits using invariant manifolds
NASA Astrophysics Data System (ADS)
Davis, Kathryn E.; Anderson, Rodney L.; Scheeres, Daniel J.; Born, George H.
2011-03-01
This paper presents a method to construct optimal transfers between unstable periodic orbits of differing energies using invariant manifolds. The transfers constructed in this method asymptotically depart the initial orbit on a trajectory contained within the unstable manifold of the initial orbit and later, asymptotically arrive at the final orbit on a trajectory contained within the stable manifold of the final orbit. Primer vector theory is applied to a transfer to determine the optimal maneuvers required to create the bridging trajectory that connects the unstable and stable manifold trajectories. Transfers are constructed between unstable periodic orbits in the Sun-Earth, Earth-Moon, and Jupiter-Europa three-body systems. Multiple solutions are found between the same initial and final orbits, where certain solutions retrace interior portions of the trajectory. All transfers created satisfy the conditions for optimality. The costs of transfers constructed using manifolds are compared to the costs of transfers constructed without the use of manifolds. In all cases, the total cost of the transfer is significantly lower when invariant manifolds are used in the transfer construction. In many cases, the transfers that employ invariant manifolds are three times more efficient, in terms of fuel expenditure, than the transfer that do not. The decrease in transfer cost is accompanied by an increase in transfer time of flight.
Physical activity levels at work and outside of work among Commercial Construction Workers
Arias, Oscar E.; Caban-Martinez, Alberto J.; Umukoro, Peter E.; Okechukwu, Cassandra A.; Dennerlein, Jack T.
2015-01-01
Objective Characterize the number of minutes of moderate and vigorous physical activity at work and outside of work during seven consecutive days, in a sample of 55 commercial construction workers. Methods Workers wore accelerometers during work and outside work hours for seven consecutive days, and completed brief survey at the seventh day of data collection. Results From the directly measured physical activity, the average number per participant of moderate minutes of occupational physical activity and physical activity outside of work obtained in short bouts were 243 minutes (65%) and 130 minutes (35%), respectively. Directly measured minutes of vigorous occupational physical activity were significant and positively correlated with self-reported fatigue. Conclusions Among commercial construction workers, physical activity from work contributes significantly, approximately 2/3, towards a workers total amount of weekly minutes of moderate physical activity. PMID:25563543
NASA Astrophysics Data System (ADS)
Gudnason, Sven Bjarke; Nitta, Muneto
2017-09-01
We propose a higher-order Skyrme model with derivative terms of eighth, tenth and twelfth order. Our construction yields simple and easy-to-interpret higher-order Lagrangians. We first show that a Skyrmion with higher-order terms proposed by Marleau has an instability in the form of a baby-Skyrmion string, while the static energies of our construction are positive definite, implying stability against time-independent perturbations. However, we also find that the Hamiltonians of our construction possess two kinds of dynamical instabilities, which may indicate the instability with respect to time-dependent perturbations. Different from the well-known Ostrogradsky instability, the instabilities that we find are intrinsically of nonlinear nature and also due to the fact that even powers of the inverse metric gives a ghost-like higher-order kinetic-like term. The vacuum state is, however, stable. Finally, we show that at sufficiently low energies, our Hamiltonians in the simplest cases, are stable against time-dependent perturbations.
Thermodynamic stability and structure of cuprous chloride surfaces: a DFT investigation.
Suleiman, Ibrahim A; Radny, Marian W; Gladys, Michael J; Smith, Phillip V; Mackie, John C; Kennedy, Eric M; Dlugogorski, Bogdan Z
2015-03-14
Density functional theory together with ab initio atomistic thermodynamics has been utilized to study the structures and stabilities of the low index CuCl surfaces. It is shown that the Cl-terminated structures are more stable than the Cu-terminated configurations, and that the defective CuCl(110)-Cu structure is more stable than the stoichiometric CuCl(110) surface. The equilibrium shape of a cuprous chloride nanostructure terminated by low-index CuCl surfaces has also been predicted using a Wulff construction. It was found that the (110) facets dominate at low chlorine concentration. As the chlorine concentration is increased, however, the contributions of the (100) and (111) facets to the Wulff construction also increase giving the crystal a semi-prism shape. At high chlorine concentration, and close to the rich limit, the (111) facets were found to be the only contributors to the Wulff construction, resulting in prismatic nanocrystals.
Rhimi, Moez; Aghajari, Nushin; Juy, Michel; Chouayekh, Hichem; Maguin, Emmanuelle; Haser, Richard; Bejar, Samir
2009-05-01
L-arabinose isomerases catalyze the bioconversion of D-galactose into D-tagatose. With the aim of producing an enzyme optimized for D-tagatose production, three Bacillus stearothermophilus US100 L-arabinose isomerase mutants were constructed, purified and characterized. Our results indicate that mutant Q268K was significantly more acidotolerant and more stable at acidic pH than the wild-type enzyme. The N175H mutant has a broad optimal temperature range from 50 to 65 degrees C. With the aim of constructing an acidotolerant mutant working at relatively low temperatures we generated the Q268K/N175H construct. This double mutant displays an optimal pH in the range 6.0-7.0 and an optimal activity around 50-65 degrees C, temperatures at which the enzyme was stable without addition of metal ions.
Yu, Kaixin; Wang, Xuetong; Li, Qiongling; Zhang, Xiaohui; Li, Xinwei; Li, Shuyu
2018-01-01
Morphological brain network plays a key role in investigating abnormalities in neurological diseases such as mild cognitive impairment (MCI) and Alzheimer's disease (AD). However, most of the morphological brain network construction methods only considered a single morphological feature. Each type of morphological feature has specific neurological and genetic underpinnings. A combination of morphological features has been proven to have better diagnostic performance compared with a single feature, which suggests that an individual morphological brain network based on multiple morphological features would be beneficial in disease diagnosis. Here, we proposed a novel method to construct individual morphological brain networks for two datasets by calculating the exponential function of multivariate Euclidean distance as the evaluation of similarity between two regions. The first dataset included 24 healthy subjects who were scanned twice within a 3-month period. The topological properties of these brain networks were analyzed and compared with previous studies that used different methods and modalities. Small world property was observed in all of the subjects, and the high reproducibility indicated the robustness of our method. The second dataset included 170 patients with MCI (86 stable MCI and 84 progressive MCI cases) and 169 normal controls (NC). The edge features extracted from the individual morphological brain networks were used to distinguish MCI from NC and separate MCI subgroups (progressive vs. stable) through the support vector machine in order to validate our method. The results showed that our method achieved an accuracy of 79.65% (MCI vs. NC) and 70.59% (stable MCI vs. progressive MCI) in a one-dimension situation. In a multiple-dimension situation, our method improved the classification performance with an accuracy of 80.53% (MCI vs. NC) and 77.06% (stable MCI vs. progressive MCI) compared with the method using a single feature. The results indicated that our method could effectively construct an individual morphological brain network based on multiple morphological features and could accurately discriminate MCI from NC and stable MCI from progressive MCI, and may provide a valuable tool for the investigation of individual morphological brain networks.
ERIC Educational Resources Information Center
Forster, Patricia A.
2004-01-01
Interpretation and construction of graphs are central to the study of physics and to performance in physics. In this paper, I explore the interpretation and construction processes called upon in questions with a graphical component, in Western Australian Physics Tertiary Entrance Examinations. In addition, I list errors made by students as…
Tian, Qing; Wu, Lei; Zhang, Jie-Fang; Malomed, Boris A; Mihalache, D; Liu, W M
2011-01-01
We put forward a generic transformation which helps to find exact soliton solutions of the nonlinear Schrödinger equation with a spatiotemporal modulation of the nonlinearity and external potentials. As an example, we construct exact solitons for the defocusing nonlinearity and harmonic potential. When the soliton's eigenvalue is fixed, the number of exact solutions is determined by energy levels of the linear harmonic oscillator. In addition to the stable fundamental solitons, stable higher-order modes, describing array of dark solitons nested in a finite-width background, are constructed too. We also show how to control the instability domain of the nonstationary solitons.
Gendered Communities of Practice and the Construction of Masculinities in Turkish Physical Education
ERIC Educational Resources Information Center
Atencio, Matthew; Koca, Canan
2011-01-01
This paper analyses the construction of masculinities in Turkish physical education through Carrie Paechter's conceptualisation of gendered communities of practice. According to Paechter, educational communities of practice operate as sites of gendered activity. Membership within these communities contributes to the construction of a gendered…
Microphase separation in solid lipid dosage forms as the cause of drug release instability.
Lopes, Diogo Gomes; Koutsamanis, Ioannis; Becker, Karin; Scheibelhofer, Otto; Laggner, Peter; Haack, Detlev; Stehr, Michael; Zimmer, Andreas; Salar-Behzadi, Sharareh
2017-01-30
Although lipid excipients are of increasing interest for development of taste-masked and modified release formulations, the drug release instability and the lack of mechanistic understanding in that regard still prevent their larger-scale application. In this work, we investigated the physical stability of a binary (tripalmitin/polysorbate 65) lipid coating formulation with a known stable polymorphism. The coating composition was characterized using DSC to construct the phase diagram of binary system and polarized light microscopy to display the microstructure organization. The water uptake and the erosion of slabs cast from the coating formulations were investigated post-production and after storage. Subsequently, N-acetylcysteine particles were coated with the selected formulations and the drug release stability was investigated. Additionally, microstructure characterization was performed via SEM and X-ray diffraction. The drug release instability was explained by polysorbate 65 and tripalmitin phase growth during storage, especially at 40°C, suggesting that polysorbate 65 can leak out of tripalmitin spherulitic structures, creating lipophilic and impermeable tripalmitin regions. The growth of polysorbate 65 phase leads to larger hydrophilic channels with reduced tortuosity. This work indicates that for obtaining stable drug release profiles from advanced lipid formulations, microphase separation should be prevented during storage. Copyright © 2016 Elsevier B.V. All rights reserved.
NASA Astrophysics Data System (ADS)
Davies, Neil S.; Gibling, Martin R.
2013-05-01
Evidence from modern rivers and the deep-time geological record attests to the fundamental importance of plant life for the construction of physical habitats within fluvial environments. Data from an extensive literature review and original fieldwork demonstrates that many landforms and geomorphic features of modern river systems appear in the Palaeozoic stratigraphic record once terrestrial vegetation had adopted certain evolutionary advances. For example, stable point bars are associated with the onset of rooted plants in the Siluro-Devonian and avulsive and anabranching fluvial systems become common at the same time as extensive arborescent vegetation in the Carboniferous. In this paper, we demonstrate a correlation between the diversification of physical fluvial environments and the expansion of terrestrial fauna and flora, with an emphasis on the culmination of these trends within Carboniferous alluvial systems. Many extrinsic factors have been considered as possible controls on the evolutionary timelines of terrestrialization for organisms. However, a fundamental prerequisite for achieving terrestrial biodiversity was the variety of physical habitats, especially riparian systems, available for newly evolved organisms. In association with abundant lowland meandering systems, the widespread appearance across Carboniferous alluvial plains of fixed-channel and anabranching reaches created further physical landforms for colonization and would have promoted increasingly complex hyporheic flow regimes. Furthermore the associated increase in arborescent vegetation and supply of large woody debris to inland and coastal rivers would have created a wealth of microhabitats for continental organisms. We argue that the expanding extent and diversity of physical alluvial niches during the Palaeozoic is an underappreciated driver of the terrestrialization of early continental life. The study of the deep-time fossil and stratigraphic record also illustrates that vegetation is a fundamental prerequisite for the creation of biogeomorphic alluvial landforms and physical habitats and microhabitats.
Reading Community: Writing Difference.
ERIC Educational Resources Information Center
Grubbs, Katherine K.
Reading the speeches each year of the program chair of the Conference on College Composition and Communication gives the reader a concrete notion of how the field has been perceived and constructed by these leaders in composition. The more recent articles also construct a surprisingly unified and stable identity for the field which is premised on…
Entropy and Galilean Invariance of Lattice Boltzmann Theories
NASA Astrophysics Data System (ADS)
Chikatamarla, Shyam S.; Karlin, Iliya V.
2006-11-01
A theory of lattice Boltzmann (LB) models for hydrodynamic simulation is developed upon a novel relation between entropy construction and roots of Hermite polynomials. A systematic procedure is described for constructing numerically stable and complete Galilean invariant LB models. The stability of the new LB models is illustrated with a shock tube simulation.
NASA Astrophysics Data System (ADS)
Hyater-Adams, Simone; Fracchiolla, Claudia; Finkelstein, Noah; Hinko, Kathleen
2018-06-01
Studies on physics identity are appearing more frequently and often responding to increased awareness of the underrepresentation of students of color in physics. In our broader research, we focus our efforts on understanding how racial identity and physics identity are negotiated throughout the experiences of Black physicists. In this paper, we present a Critical Physics Identity framework that can be used to examine racialized physics identity and demonstrate the utility of this framework by analyzing interviews with four physicists. Our framework draws from prior constructs of physics identity and racialized identity and provides operational definitions of six interacting dimensions. In this paper, we present the operationalized constructs, demonstrate how we use these constructs to code narrative data, as well as outline three methods of analysis that may be applied to study systems and structures and their influences on the experiences of Black students.
Metastability in plyometric training on unstable surfaces: a pilot study
2014-01-01
Background In the past, plyometric training (PT) has been predominantly performed on stable surfaces. The purpose of this pilot study was to examine effects of a 7-week lower body PT on stable vs. unstable surfaces. This type of exercise condition may be denoted as metastable equilibrium. Methods Thirty-three physically active male sport science students (age: 24.1 ± 3.8 years) were randomly assigned to a PT group (n = 13) exercising on stable (STAB) and a PT group (n = 20) on unstable surfaces (INST). Both groups trained countermovement jumps, drop jumps, and practiced a hurdle jump course. In addition, high bar squats were performed. Physical fitness tests on stable surfaces (hexagonal obstacle test, countermovement jump, hurdle drop jump, left-right hop, dynamic and static balance tests, and leg extension strength) were used to examine the training effects. Results Significant main effects of time (ANOVA) were found for the countermovement jump, hurdle drop jump, hexagonal test, dynamic balance, and leg extension strength. A significant interaction of time and training mode was detected for the countermovement jump in favor of the INST group. No significant improvements were evident for either group in the left-right hop and in the static balance test. Conclusions These results show that lower body PT on unstable surfaces is a safe and efficient way to improve physical performance on stable surfaces. PMID:25089202
Raustorp, Anders; Pagels, Peter; Fröberg, Andreas; Boldemann, Cecilia
2015-08-01
This study explored physical activity, body mass index (BMI) and overweight and obesity from 2000 to 2013 using a convenience sample of second- and fifth-grade Swedish schoolchildren aged 8-9 years and 11-12 years, respectively. We examined cross-sectional cohorts of 126 second-grade children in 2000, 84 in 2006 and 44 in 2013 and 105 fifth-grade children in 2000 and 38 in 2013. No fifth graders were available in 2006. Physical activity data were collected based on pedometer readings over four consecutive weekdays, and height and weight were measured. Identical instruments and procedures were used in all three years. There was an increase in physical activity in second-grade girls from 2000 to 2006 (p < 0.01), which then stabilised between 2006 and 2013, but second-grade boys and fifth-grade girls were stable throughout the study period. Fifth-grade boys decreased significantly (24%) from 16 670 to 12 704 steps per day (p < 0.01) from 2000 to 2013. Mean BMI scores remained stable over time. Time trends in physical activity differed between boys and girls. Second-grade boys and fifth-grade girls were stable throughout, whereas second-grade girls increased from 2000 to 2006 before stabilising. Fifth-grade boys showed a significant 24% reduction from 2000 to 2013. Changes in recess and leisure time habits, such as smartphone use, may have influenced the result. ©2015 Foundation Acta Paediatrica. Published by John Wiley & Sons Ltd.
Newton, Maria; Detling, Nicole; Kilgore, Jennifer; Bernhardt, Paul
2004-12-01
The relations of achievement goal theory constructs and physical self-perceptions were explored with 225 students (91 men, 109 women, and 25 nonindicators; M age=23.5 yr., SD=9.2), enrolled in basic physical activity classes (aerobics, weight training, modern dance, badminton, yoga, tai chi, basketball, racquetball, gymnastics, bowling, aquatone, and step aerobics) in a university setting. Goal orientations (Task and Ego Orientation in Sport Questionnaire), perceptions of the motivational climate (Perceived Motivational Climate in Sport Questionnaire-2), and physical self-perceptions (Physical Self-perception Profile) were assessed. Data were analyzed separately by sex. Ego orientation was the only predictor of Physical Self-perceptions in men, accounting for between 12 and 15% of the variance in Physical Self-worth, Sport Competence, Physical Conditioning, and Body Attractiveness. Constructs of achievement goal theory were not predictive of Physical Self-perceptions in the women. The results are discussed in light of achievement goal theory and the nature of the sample.
Influence of fatigue on construction workers' physical and cognitive function.
Zhang, M; Murphy, L A; Fang, D; Caban-Martinez, A J
2015-04-01
Despite scientific evidence linking workers' fatigue to occupational safety (due to impaired physical or cognitive function), little is known about this relationship in construction workers. To assess the association between construction workers' reported fatigue and their perceived difficulties with physical and cognitive functions. Using data from a convenience sample of US construction workers participating in the 2010-11 National Health Interview Survey two multivariate weighted logistic regression models were built to predict difficulty with physical and with cognitive functions associated with workers' reported fatigue, while controlling for age, smoking status, alcohol consumption status, sleep hygiene, psychological distress and arthritis status. Of 606 construction workers surveyed, 49% reported being 'tired some days' in the past 3 months and 10% reported 'tired most days or every day'. Compared with those feeling 'never tired', workers who felt 'tired some days' were significantly more likely to report difficulty with physical function (adjusted odds ratio [AOR] = 2.03; 95% confidence interval [CI] 1.17-3.51) and cognitive function (AOR = 2.27; 95% CI 1.06-4.88) after controlling for potential confounders. Our results suggest an association between reported fatigue and experiencing difficulties with physical and cognitive functions in construction workers. © The Author 2015. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.
Foraging and farming as niche construction: stable and unstable adaptations
Rowley-Conwy, Peter; Layton, Robert
2011-01-01
All forager (or hunter–gatherer) societies construct niches, many of them actively by the concentration of wild plants into useful stands, small-scale cultivation, burning of natural vegetation to encourage useful species, and various forms of hunting, collectively termed ‘low-level food production’. Many such niches are stable and can continue indefinitely, because forager populations are usually stable. Some are unstable, but these usually transform into other foraging niches, not geographically expansive farming niches. The Epipalaeolithic (final hunter–gatherer) niche in the Near East was complex but stable, with a relatively high population density, until destabilized by an abrupt climatic change. The niche was unintentionally transformed into an agricultural one, due to chance genetic and behavioural attributes of some wild plant and animal species. The agricultural niche could be exported with modifications over much of the Old World. This was driven by massive population increase and had huge impacts on local people, animals and plants wherever the farming niche was carried. Farming niches in some areas may temporarily come close to stability, but the history of the last 11 000 years does not suggest that agriculture is an effective strategy for achieving demographic and political stability in the world's farming populations. PMID:21320899
Battery cell feedthrough apparatus
Kaun, Thomas D.
1995-01-01
A compact, hermetic feedthrough apparatus comprising interfitting sleeve portions constructed of chemically-stable materials to permit unique battery designs and increase battery life and performance.
ERIC Educational Resources Information Center
Standage, Martyn; Duda, Joan L.; Ntoumanis, Nikos
2003-01-01
Examines a study of student motivation in physical education that incorporated constructs from achievement goal and self-determination theories. Self-determined motivation was found to positively predict, whereas amotivation was a negative predictor of leisure-time physical activity intentions. (Contains 86 references and 3 tables.) (GCP)
ERIC Educational Resources Information Center
Wellard, Ian; Pickard, Angela; Bailey, Richard
2007-01-01
Participation in physical activities, in and out of school, remains heavily influenced by social constructions of gendered behaviour. In addition, the body plays a significant part in the presentation of legitimate performances of physical practice and the construction of a physical "identity". The consequence is that in formalized…
Lundström, Johan N.; Gordon, Amy R.; Alden, Eva C.; Boesveldt, Sanne; Albrecht, Jessica
2010-01-01
Many human olfactory experiments call for fast and stable stimulus-rise times as well as exact and stable stimulus-onset times. Due to these temporal demands, an olfactometer is often needed. However, an olfactometer is a piece of equipment that either comes with a high price tag or requires a high degree of technical expertise to build and/or to run. Here, we detail the construction of an olfactometer that is constructed almost exclusively with “off-the-shelf” parts, requires little technical knowledge to build, has relatively low price tags, and is controlled by E-Prime, a turnkey-ready and easily-programmable software commonly used in psychological experiments. The olfactometer can present either solid or liquid odor sources, and it exhibits a fast stimulus-rise time and a fast and stable stimulus-onset time. We provide a detailed description of the olfactometer construction, a list of its individual parts and prices, as well as potential modifications to the design. In addition, we present odor onset and concentration curves as measured with a photoionization detector, together with corresponding GC/MS analyses of signal-intensity drop (5.9%) over a longer period of use. Finally, we present data from behavioral and psychophysiological recordings demonstrating that the olfactometer is suitable for use during event-related EEG experiments. PMID:20688109
The analysis of composite laminated beams using a 2D interpolating meshless technique
NASA Astrophysics Data System (ADS)
Sadek, S. H. M.; Belinha, J.; Parente, M. P. L.; Natal Jorge, R. M.; de Sá, J. M. A. César; Ferreira, A. J. M.
2018-02-01
Laminated composite materials are widely implemented in several engineering constructions. For its relative light weight, these materials are suitable for aerospace, military, marine, and automotive structural applications. To obtain safe and economical structures, the modelling analysis accuracy is highly relevant. Since meshless methods in the recent years achieved a remarkable progress in computational mechanics, the present work uses one of the most flexible and stable interpolation meshless technique available in the literature—the Radial Point Interpolation Method (RPIM). Here, a 2D approach is considered to numerically analyse composite laminated beams. Both the meshless formulation and the equilibrium equations ruling the studied physical phenomenon are presented with detail. Several benchmark beam examples are studied and the results are compared with exact solutions available in the literature and the results obtained from a commercial finite element software. The results show the efficiency and accuracy of the proposed numeric technique.
Realization of compact tractor beams using acoustic delay-lines
NASA Astrophysics Data System (ADS)
Marzo, A.; Ghobrial, A.; Cox, L.; Caleap, M.; Croxford, A.; Drinkwater, B. W.
2017-01-01
A method for generating stable ultrasonic levitation of physical matter in air using single beams (also known as tractor beams) is demonstrated. The method encodes the required phase modulation in passive unit cells into which the ultrasonic sources are mounted. These unit cells use waveguides such as straight and coiled tubes to act as delay-lines. It is shown that a static tractor beam can be generated using a single electrical driving signal, and a tractor beam with one-dimensional movement along the propagation direction can be created with two signals. Acoustic tractor beams capable of holding millimeter-sized polymer particles of density 1.25 g/cm3 and fruit-flies (Drosophila) are demonstrated. Based on these design concepts, we show that portable tractor beams can be constructed with simple components that are readily available and easily assembled, enabling applications in industrial contactless manipulation and biophysics.
NASA Technical Reports Server (NTRS)
Kourtides, D. A.; Parker, J. A.
1978-01-01
The thermochemical and flammability properties of some thermally stable polymers considered for use in aircraft interiors are described. The properties studied include: (1) thermomechanical properties such as glass transition and melt temperature; (2) dynamic thermogravimetric analysis in anaerobic environment; (3) flammability properties such as oxygen index, flame spread, and smoke evolution; and (4) selected physical properties. The thermoplastic polymers evaluated included polyphenylene sulfide, polyaryl sulfone, 9,9-bis(4-hydroxyphenyl)-fluorene polycarbonate-poly(dimethylsiloxane) and polyether sulfone. The thermoset polymers evaluated included epoxy, bismaleimide, a modified phenolic and polyaromatic melamine resin. These resins were primarily used in the fabrication of glass reinforced prepregs for the construction of experimental panels. Test results and relative rankings of some of the flammability parameters are presented and the relationship of the molecular structure, char yield, and flammability properties of these polymers are discussed.
The Pendulum Weaves All Knots and Links
NASA Astrophysics Data System (ADS)
Starrett, John
2003-08-01
From a topological point of view, periodic orbits of three dimensional dynamical systems are knots, that is, circles (S∧1) embedded in the three sphere (S∧3) or in R∧3. The ensemble of periodic orbits comprising the skeleton of a 3-D strange attractor form a link: a collection of (not necessarily linked) knots. Joan Birman and Robert Williams used a topological device known as the template, a branched two-manifold that results when the stable direction is collapsed out of an attractor, to analyze the knot and link types appearing in the geometric Lorenz attractor. More recently, Robert Ghrist has shown the existence of universal templates: templates that support all knot and link types. I show that the template constructed from the geometric attractor of a forced physical pendulum contains a universal template as a subtemplate, and therefore the orbit set of the pendulum contains every knot and link type.
42 CFR 485.623 - Condition of participation: Physical plant and environment.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 42 Public Health 5 2013-10-01 2013-10-01 false Condition of participation: Physical plant and environment. 485.623 Section 485.623 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF... participation: Physical plant and environment. (a) Standard: Construction. The CAH is constructed, arranged, and...
42 CFR 485.623 - Condition of participation: Physical plant and environment.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 42 Public Health 5 2014-10-01 2014-10-01 false Condition of participation: Physical plant and environment. 485.623 Section 485.623 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF... participation: Physical plant and environment. (a) Standard: Construction. The CAH is constructed, arranged, and...
42 CFR 485.623 - Condition of participation: Physical plant and environment.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 42 Public Health 5 2011-10-01 2011-10-01 false Condition of participation: Physical plant and environment. 485.623 Section 485.623 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF... participation: Physical plant and environment. (a) Standard: Construction. The CAH is constructed, arranged, and...
42 CFR 485.623 - Condition of participation: Physical plant and environment.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 42 Public Health 5 2012-10-01 2012-10-01 false Condition of participation: Physical plant and environment. 485.623 Section 485.623 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF... participation: Physical plant and environment. (a) Standard: Construction. The CAH is constructed, arranged, and...
Changes in multifractal properties for stable angina pectoris
NASA Astrophysics Data System (ADS)
Knežević, Andrea; Martinis, Mladen; Krstačić, Goran; Vargović, Emil
2005-12-01
The multifractal approach has been applied to temporal fluctuations of heartbeat (RR) intervals, measured in various regimes of physical activity (ergometric data), taken from healthy subjects and those having stable angina pectoris (SAP). The problem we address here is whether SAP changes multifractality observed in healthy subjects. The G-moment method is used to analyse the multifractal spectrum. It is observed that both sets of data characterize multifractality, but a different trend in multifractal behaviour is found for SAP disease, under pronounced physical activity.
NASA Astrophysics Data System (ADS)
Rees, D.; Fuller-Rowell, T. J.; Lyons, A.; Killeen, T. L.; Hays, P. B.
1982-11-01
The cemented etalons are shown to be rugged and highly stable for high-resolution spectroscopy and to be well suited to space applications. The etalons will be of considerable value as the tuning elements of dye laser systems and as the stable spectral disperser for pulse and CW laser spectroscopy. Even for etalons 15 cm in diameter, the strength of the cemented bond is greatly in excess of the maximum steady and impulsive forces experienced from the much larger etalon plate mass (2-4 kg rather than 200 g). It is thought that the small but systematic and significant positive increment in the thermal expansion coefficient which occurs when an etalon and its spacers are cemented may be linked to the cessation of the microscopic migration that occurs with an optically contacted bond under thermal or mechanical stress. The etalon comprises two flat plates of fused silica, with spacers constructed of Zerodur (a polycrystalline glass ceramic of extremely low expansion coefficient) which are cemented together using cyanoacrylic adhesives.
Rational Design of Evolutionarily Stable Microbial Kill Switches.
Stirling, Finn; Bitzan, Lisa; O'Keefe, Samuel; Redfield, Elizabeth; Oliver, John W K; Way, Jeffrey; Silver, Pamela A
2017-11-16
The evolutionary stability of synthetic genetic circuits is key to both the understanding and application of genetic control elements. One useful but challenging situation is a switch between life and death depending on environment. Here are presented "essentializer" and "cryodeath" circuits, which act as kill switches in Escherichia coli. The essentializer element induces cell death upon the loss of a bi-stable cI/Cro memory switch. Cryodeath makes use of a cold-inducible promoter to express a toxin. We employ rational design and a toxin/antitoxin titering approach to produce and screen a small library of potential constructs, in order to select for constructs that are evolutionarily stable. Both kill switches were shown to maintain functionality in vitro for at least 140 generations. Additionally, cryodeath was shown to control the growth environment of a population, with an escape frequency of less than 1 in 10 5 after 10 days of growth in the mammalian gut. Copyright © 2017 Elsevier Inc. All rights reserved.
Cai, Jian; Mo, Xiwei; Cheng, Guojun; Du, Dongyun
2015-01-01
A stable aerobic microbial consortium, established by successive subcultivation, was employed to solubilize the solid organic fraction in swine wastewater. In the 30 days' successive biological pretreatments, 30-38% of volatile solids and 19-28% total solids in raw slurry were solubilized after 10 hours at 37 °C. Meanwhile, soluble chemical oxygen demand (COD) and volatile fatty acid increased by 48%-56% and 600%-750%, respectively. Furthermore, the molecular microbial profile of the consortium in successive pretreatment was conducted by denaturing gradient gel electrophoresis (DGGE). The results indicated that bacterial species of the consortium rapidly overgrew the indigenous microbial community of raw water, and showed a stable predominance at the long-term treatment. As a consequence of biological pretreatment, pretreatment shortened digestion time by 50% and increased biogas production by 45% compared to raw water in the anaerobic process. The microbial consortium constructed herein is a potential candidate consortium for biological pretreatment of swine wastewater to enhance biogas production.
Gueorguiev, Boyko; Wähnert, Dirk; Albrecht, Daniel; Ockert, Ben; Windolf, Markus; Schwieger, Karsten
2011-02-01
Unstable distal tibia fractures are challenging injuries that require surgery. Increasingly, intramedullary nails are being used. However, fracture site anatomy may cause distal-fragment stabilization and fixation problems and lead to malunion/nonunion. We studied the influence of angle-stable nail locking on fracture gap movement and other biomechanical parameters. Eight pairs of fresh human cadaver tibiae were used. The bone mineral density (BMD) was determined. All tibiae were nailed with a Synthes Expert tibial nail. Within each pair, one tibia was randomized to receive conventional locking screws; the other, angle-stable screws with sleeves. A 7-mm osteotomy was created 10 mm above the upper distal locking screw, to simulate an AO 42-A3 fracture. Biomechanical testing involved nondestructive mediolateral and anteroposterior pure bending, followed by cyclic combined axial and torsional loading to catastrophic failure. The neutral zone was determined. Fracture gap movement was monitored with 3-D motion tracking. The angle-stable locked constructs had a significantly smaller mediolateral neutral zone (mean: 0.04 degree; p=0.039) and significantly smaller fracture gap angulation (p=0.043). The number of cycles to failure did not differ significantly between the locking configurations. BMD was a significant covariate affecting the number of cycles to failure (p=0.008). However, over the first 20,000 cycles, there was no significant correlation in the angle-stable construct. Angle-stable locking of the Expert tibial nail was associated with a significant reduction in the mediolateral neutral zone and in fracture gap movement. Angle-stable fixation also reduced the influence of BMD over the first 20,000 cycles.
The shear instability energy: a new parameter for materials design?
NASA Astrophysics Data System (ADS)
Kanani, M.; Hartmaier, A.; Janisch, R.
2017-10-01
Reliable and predictive relationships between fundamental microstructural material properties and observable macroscopic mechanical behaviour are needed for the successful design of new materials. In this study we establish a link between physical properties that are defined on the atomic level and the deformation mechanisms of slip planes and interfaces that govern the mechanical behaviour of a metallic material. To accomplish this, the shear instability energy Γ is introduced, which can be determined via quantum mechanical ab initio calculations or other atomistic methods. The concept is based on a multilayer generalised stacking fault energy calculation and can be applied to distinguish the different shear deformation mechanisms occurring at TiAl interfaces during finite-temperature molecular dynamics simulations. We use the new parameter Γ to construct a deformation mechanism map for different interfaces occurring in this intermetallic. Furthermore, Γ can be used to convert the results of ab initio density functional theory calculations into those obtained with an embedded atom method type potential for TiAl. We propose to include this new physical parameter into material databases to apply it for the design of materials and microstructures, which so far mainly relies on single-crystal values for the unstable and stable stacking fault energy.
Shen, Tongye; Gnanakaran, S
2009-04-22
A critical roadblock to the production of biofuels from lignocellulosic biomass is the efficient degradation of crystalline microfibrils of cellulose to glucose. A microscopic understanding of how different physical conditions affect the overall stability of the crystalline structure of microfibrils could facilitate the design of more effective protocols for their degradation. One of the essential physical interactions that stabilizes microfibrils is a network of hydrogen (H) bonds: both intrachain H-bonds between neighboring monomers of a single cellulose polymer chain and interchain H-bonds between adjacent chains. We construct a statistical mechanical model of cellulose assembly at the resolution of explicit hydrogen-bond networks. Using the transfer matrix method, the partition function and the subsequent statistical properties are evaluated. With the help of this lattice-based model, we capture the plasticity of the H-bond network in cellulose due to frustration and redundancy in the placement of H-bonds. This plasticity is responsible for the stability of cellulose over a wide range of temperatures. Stable intrachain and interchain H-bonds are identified as a function of temperature that could possibly be manipulated toward rational destruction of crystalline cellulose.
NASA Technical Reports Server (NTRS)
Rundle, John B.
1988-01-01
The idea that earthquakes represent a fluctuation about the long-term motion of plates is expressed mathematically through the fluctuation hypothesis, under which all physical quantities which pertain to the occurance of earthquakes are required to depend on the difference between the present state of slip on the fault and its long-term average. It is shown that under certain circumstances the model fault dynamics undergo a sudden transition from a spatially ordered, temporally disordered state to a spatially disordered, temporally ordered state, and that the latter stages are stable for long intervals of time. For long enough faults, the dynamics are evidently chaotic. The methods developed are then used to construct a detailed model for earthquake dynamics in southern California. The result is a set of slip-time histories for all the major faults, which are similar to data obtained by geological trenching studies. Although there is an element of periodicity to the events, the patterns shift, change and evolve with time. Time scales for pattern evolution seem to be of the order of a thousand years for average recurring intervals of about a hundred years.
Krasnopolsky, Vladimir; Nadiga, Sudhir; Mehra, Avichal; Bayler, Eric; Behringer, David
2016-01-01
A neural network (NN) technique to fill gaps in satellite data is introduced, linking satellite-derived fields of interest with other satellites and in situ physical observations. Satellite-derived "ocean color" (OC) data are used in this study because OC variability is primarily driven by biological processes related and correlated in complex, nonlinear relationships with the physical processes of the upper ocean. Specifically, ocean color chlorophyll-a fields from NOAA's operational Visible Imaging Infrared Radiometer Suite (VIIRS) are used, as well as NOAA and NASA ocean surface and upper-ocean observations employed--signatures of upper-ocean dynamics. An NN transfer function is trained, using global data for two years (2012 and 2013), and tested on independent data for 2014. To reduce the impact of noise in the data and to calculate a stable NN Jacobian for sensitivity studies, an ensemble of NNs with different weights is constructed and compared with a single NN. The impact of the NN training period on the NN's generalization ability is evaluated. The NN technique provides an accurate and computationally cheap method for filling in gaps in satellite ocean color observation fields and time series.
Nadiga, Sudhir; Mehra, Avichal; Bayler, Eric; Behringer, David
2016-01-01
A neural network (NN) technique to fill gaps in satellite data is introduced, linking satellite-derived fields of interest with other satellites and in situ physical observations. Satellite-derived “ocean color” (OC) data are used in this study because OC variability is primarily driven by biological processes related and correlated in complex, nonlinear relationships with the physical processes of the upper ocean. Specifically, ocean color chlorophyll-a fields from NOAA's operational Visible Imaging Infrared Radiometer Suite (VIIRS) are used, as well as NOAA and NASA ocean surface and upper-ocean observations employed—signatures of upper-ocean dynamics. An NN transfer function is trained, using global data for two years (2012 and 2013), and tested on independent data for 2014. To reduce the impact of noise in the data and to calculate a stable NN Jacobian for sensitivity studies, an ensemble of NNs with different weights is constructed and compared with a single NN. The impact of the NN training period on the NN's generalization ability is evaluated. The NN technique provides an accurate and computationally cheap method for filling in gaps in satellite ocean color observation fields and time series. PMID:26819586
How Physicists Made Stable Lévy Processes Physically Plausible
NASA Astrophysics Data System (ADS)
Schinckus, Christophe
2013-08-01
Stable Lévy processes have very interesting properties for describing the complex behaviour of non-equilibrium dissipative systems such as turbulence, anomalous diffusion or financial markets. However, although these processes better fit the empirical data, some of their statistical properties can raise several theoretical problems in empirical applications because they generate infinite variables. Econophysicists have developed statistical solutions to make these processes physically plausible. This paper presents a review of these analytical solutions (truncations) for stable Lévy processes and how econophysicists transformed them into data-driven processes. The evolution of these analytical solutions is presented as a progressive research programme provided by (econo)physicists for theoretical problems encountered in financial economics in the 1960s and the 1970s.
2012-01-01
Background To prolong sustainable healthy working lives of construction workers, a worksite prevention program was developed which aimed to improve the health and work ability of construction workers. The aim of the current study was to investigate the effectiveness of this program on social support at work, work engagement, physical workload and need for recovery. Methods Fifteen departments from six construction companies participated in this cluster randomized controlled trial; 8 departments (n=171 workers) were randomized to an intervention group and 7 departments (n=122 workers) to a control group. The intervention consisted of two individual training sessions of a physical therapist to lower the physical workload, a Rest-Break tool to improve the balance between work and recovery, and two empowerment training sessions to increase the influence of the construction workers at the worksite. Data on work engagement, social support at work, physical workload, and need for recovery were collected at baseline, and at three, six and 12 months after the start of the intervention using questionnaires. Results No differences between the intervention and control group were found for work engagement, social support at work, and need for recovery. At 6 months follow-up, the control group reported a small but statistically significant reduction of physical workload. Conclusion The intervention neither improved social support nor work engagement, nor was it effective in reducing the physical workload and need for recovery among construction workers. Trial registration NTR1278 PMID:23171354
Investigation of Stable Atmospheric Stratification Effect on the Dynamics of Descending Vortex Pairs
DOT National Transportation Integrated Search
1979-02-01
The physics of vortex flows in stratified fluids is studied with the objective of determining the influence of stable stratification on the descent of aircraft vortex pairs. Vortex rings descending into linear and discontinuous density stratification...
The Stakes of Movement: A Dynamic Approach to Mathematical Thinking
ERIC Educational Resources Information Center
Roth, Wolff-Michael; Maheux, Jean-François
2015-01-01
Standard approaches to thinking in the mathematics curriculum depict it as the result of some stable constructions in the mind of the person, constructions that are the results of individual efforts in the mind of subjects or of collective efforts that are then appropriated by and into the mind of individuals. Such work does not appreciate what…
1983-11-21
Geology of Astoria Submarine Canyon. Ph.D. Thesis, Oregon State University, Corvallis, Oreg., 259 pp. *% ’ Jerlov, N.G., 1976. Marine Optics. Elsevier...beam transmissometer that is low in cost , relatively stable, acd consumes very little power. In this paper wE present the design and calibra- tion of d...beam transmissometer that is constructed with P.V.C. to simplify the desiql d minimize costs , contains stable temperature compensated electronics, and
Asymptotically flat, stable black hole solutions in Einstein-Yang-Mills-Chern-Simons theory.
Brihaye, Yves; Radu, Eugen; Tchrakian, D H
2011-02-18
We construct finite mass, asymptotically flat black hole solutions in d=5 Einstein-Yang-Mills-Chern-Simons theory. Our results indicate the existence of a second order phase transition between Reissner-Nordström solutions and the non-Abelian black holes which generically are thermodynamically preferred. Some of the non-Abelian configurations are also stable under linear, spherically symmetric perturbations.
Knowledge of the trophic structure of biota in aquatic sites offers potential for the construction of models to allow the prediction of contaminant bioaccumulation. Measurements of trophic position have been conducted using stable-nitrogen isotope ratios ( 15N) measured in fish m...
Construction of energy-stable projection-based reduced order models
Kalashnikova, Irina; Barone, Matthew F.; Arunajatesan, Srinivasan; ...
2014-12-15
Our paper aims to unify and extend several approaches for building stable projection-based reduced order models (ROMs) using the energy method and the concept of “energy-stability”. Attention is focused on linear time-invariant (LTI) systems. First, an approach for building energy stable Galerkin ROMs for linear hyperbolic or incompletely parabolic systems of partial differential equations (PDEs) using continuous projection is proposed. The key idea is to apply to the system a transformation induced by the Lyapunov function for the system, and to build the ROM in the transformed variables. The result of this procedure will be a ROM that is energy-stablemore » for any choice of reduced basis. It is shown that, for many PDE systems, the desired transformation is induced by a special inner product, termed the “symmetry inner product”. Next, attention is turned to building energy-stable ROMs via discrete projection. A discrete counterpart of the continuous symmetry inner product, termed the “Lyapunov inner product”, is derived. Moreover, it is shown that the Lyapunov inner product can be computed in a black-box fashion for a stable LTI system ari sing from the discretization of a system of PDEs in space. Projection in this inner product guarantees a ROM that is energy-stable, again for any choice of reduced basis. Connections between the Lyapunov inner product and the inner product induced by the balanced truncation algorithm are made. We also made comparisons between the symmetry inner product and the Lyapunov inner product. Performance of ROMs constructed using these inner products is evaluated on several benchmark test cases.« less
Kang, Shin-Young; Kim, Yeon-Gu; Kang, Seunghee; Lee, Hong Weon; Lee, Eun Gyo
2016-05-01
Vectors flanked by regulatory DNA elements have been used to generate stable cell lines with high productivity and transgene stability; however, regulatory elements in Chinese hamster ovary (CHO) cells, which are the most widely used mammalian cells in biopharmaceutical production, are still poorly understood. We isolated a novel gene regulatory element from CHO-K1 cells, designated E77, which was found to enhance the stable expression of a transgene. A genomic library was constructed by combining CHO-K1 genomic DNA fragments with a CMV promoter-driven GFP expression vector, and the E77 element was isolated by screening. The incorporation of the E77 regulatory element resulted in the generation of an increased number of clones with high expression, thereby enhancing the expression level of the transgene in the stable transfectant cell pool. Interestingly, the E77 element was found to consist of two distinct fragments derived from different locations in the CHO genome shotgun sequence. High and stable transgene expression was obtained in transfected CHO cells by combining these fragments. Additionally, the function of E77 was found to be dependent on its site of insertion and specific orientation in the vector construct. Our findings demonstrate that stable gene expression mediated by the CMV promoter in CHO cells may be improved by the isolated novel gene regulatory element E77 identified in the present study. © 2016 The Authors. Biotechnology Journal published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
ERIC Educational Resources Information Center
Bair, Howard V.; Leland, Henry
To investigate the appropriate design and utilization of physical facilities being constructed as a rehabilitation center, a variety of centers was examined. Conclusions were that flexibility in construction of the physical plant, including nonpermanent walls and fixtures was necessary; program planning should be included in architectural…
Rees, D; Fuller-Rowell, T J; Lyons, A; Killeen, T L; Hays, P B
1982-11-01
This is one of two papers which describe the development and performance of a very stable and rugged etalon designed for use in the Fabry-Perot interferometer, one of the instruments of the NASA Dynamics Explorer satellite mission, and which will obtain global measurements of the thermospheric and mesospheric wind and temperature with an accuracy of aporoximately 10 m/sec. The etalon consists of two flat plates of fused silica, with spacers constructed of Zerodur (a polycrystalline glass ceramic of extremely low expansion coefficient) which are cemented together using cyanoacrylic adhesives. This provides adequate mechanical integrity and stability for any space flight application and has a thermal expansion coefficient of the etalon cavity of <10(-7)/ degrees C.
ERIC Educational Resources Information Center
Walseth, Kristin; Aartun, Iselin; Engelsrud, Gunn
2017-01-01
Girls' identity constructions are influenced by the dominant sport, health and beauty discourses in their society. Recent research indicates that sport and health discourses embedded in physical education (PE) compete for influence. Some of these studies have illustrated how these discourses inform girls' social construction of body ideals and…
Structures and construction of nuclear power plants on lunar surface
NASA Astrophysics Data System (ADS)
Shimizu, Katsunori; Kobatake, Masuhiko; Ogawa, Sachio; Kanamori, Hiroshi; Okada, Yasuhiko; Mano, Hideyuki; Takagi, Kenji
1991-07-01
The best structure and construction techniques of nuclear power plants in the severe environments on the lunar surface are studied. Facility construction types (functional conditions such as stable structure, shield thickness, maintainability, safety distances, and service life), construction conditions (such as construction methods, construction equipment, number of personnel, time required for construction, external power supply, and required transportation) and construction feasibility (construction method, reactor transportation between the moon and the earth, ground excavation for installation, loading and unloading, transportation, and installation, filling up the ground, electric power supply of plant S (300 kW class) and plant L (3000 kW class)) are outlined. Items to pay attention to in construction are (1) automation and robotization of construction; (2) cost reduction by multi functional robots; and (3) methods of supplying power to robots. A precast concrete block manufacturing plant is also outlined.
Christiana, Richard W; Davis, Marsha; Wilson, Mark G; McCarty, Frances A; Green, Gary T
2014-12-01
Young adolescents who have little interest in participating in competitive team sports are at an increased risk for physical inactivity. Noncompetitive outdoor physical activity can provide young adolescents with increased opportunities to participate in physical activities that appeal to them and have positive health effects. The purpose of this study was to examine factors related to rural young adolescents' participation in noncompetitive outdoor physical activity to inform intervention design. Young adolescents aged 10 to 14 years old (N = 1,032) from 1 rural county completed a self-administered questionnaire assessing constructs from self-determination theory (SDT) and the theory of planned behavior (TPB) related to noncompetitive outdoor physical activity. Structural equation modeling was used to examine an integrated conceptual model of hypothesized relationships among constructs. The hypothesized conceptual model provided a good fit to the data with greater perceptions of autonomy support and self-determined motivation having statistically significant positive indirect effects on participation in noncompetitive outdoor physical activity mediated by the constructs of the TPB. All direct paths in the model were statistically significant; however, the direct effect of attitudes on intention was weak (.08) and self-determined motivation had no indirect effect on intention through attitudes (.03). Constructs of SDT and TPB should be accounted for by interventions targeting noncompetitive outdoor physical activity among young adolescents. More research is needed to determine young adolescents' preferences for noncompetitive and competitive physical activity and the potential influence that noncompetitive outdoor physical activity may have on total daily physical activity.
Medieval Horse Stable; The Results of Multi Proxy Interdisciplinary Research
Dejmal, Miroslav; Lisá, Lenka; Fišáková Nývltová, Miriam; Bajer, Aleš; Petr, Libor; Kočár, Petr; Kočárová, Romana; Nejman, Ladislav; Rybníček, Michal; Sůvová, Zdenka; Culp, Randy; Vavrčík, Hanuš
2014-01-01
A multi proxy approach was applied in the reconstruction of the architecture of Medieval horse stable architecture, the maintenance practices associated with that structure as well as horse alimentation at the beginning of 13th century in Central Europe. Finally, an interpretation of the local vegetation structure along Morava River, Czech Republic is presented. The investigated stable experienced two construction phases. The infill was well preserved and its composition reflects maintenance practices. The uppermost part of the infill was composed of fresh stabling, which accumulated within a few months at the end of summer. Horses from different backgrounds were kept in the stable and this is reflected in the results of isotope analyses. Horses were fed meadow grasses as well as woody vegetation, millet, oat, and less commonly hemp, wheat and rye. Three possible explanations of stable usage are suggested. The stable was probably used on a temporary basis for horses of workers employed at the castle, courier horses and horses used in battle. PMID:24670874
Battery cell feedthrough apparatus
Kaun, T.D.
1995-03-14
A compact, hermetic feedthrough apparatus is described comprising interfitting sleeve portions constructed of chemically-stable materials to permit unique battery designs and increase battery life and performance. 8 figs.
Test Frame for Gravity Offload Systems
NASA Technical Reports Server (NTRS)
Murray, Alexander R.
2005-01-01
Advances in space telescope and aperture technology have created a need to launch larger structures into space. Traditional truss structures will be too heavy and bulky to be effectively used in the next generation of space-based structures. Large deployable structures are a possible solution. By packaging deployable trusses, the cargo volume of these large structures greatly decreases. The ultimate goal is to three dimensionally measure a boom's deployment in simulated microgravity. This project outlines the construction of the test frame that supports a gravity offload system. The test frame is stable enough to hold the gravity offload system and does not interfere with deployment of, or vibrations in, the deployable test boom. The natural frequencies and stability of the frame were engineered in FEMAP. The test frame was developed to have natural frequencies that would not match the first two modes of the deployable beam. The frame was then modeled in Solidworks and constructed. The test frame constructed is a stable base to perform studies on deployable structures.
Quaedvlieg, N E; Schlaman, H R; Admiraal, P C; Wijting, S E; Stougaard, J; Spaink, H P
1998-07-01
By fusing the genes encoding green fluorescent protein (GFP) and beta-glucuronidase (GUS) we have created a set of bifunctional reporter constructs which are optimized for use in transient and stable expression studies in plants. This approach makes it possible to combine the advantage of GUS, its high sensitivity in histochemical staining, with the advantages of GFP as a vital marker. The fusion proteins were functional in transient expression studies in tobacco using either DNA bombardment or potato virus X as a vector, and in stably transformed Arabidopsis thaliana and Lotus japonicus plants. The results show that high level of expression does not interfere with efficient stable transformation in A. thaliana and L. japonicus. Using confocal laser scanning microscopy we show that the fusion constructs are very suitable for promoter expression studies in all organs of living plants, including root nodules. The use of these reporter constructs in the model legume L. japonicus offers exciting new possibilities for the study of the root nodulation process.
Quaedvlieg, N E; Schlaman, H R; Admiraal, P C; Wijting, S E; Stougaard, J; Spaink, H P
1998-11-01
By fusing the genes encoding green fluorescent protein (GFP) and beta-glucuronidase (GUS) we have created a set of bifunctional reporter constructs which are optimized for use in transient and stable expression studies in plants. This approach makes it possible to combine the advantage of GUS, its high sensitivity in histochemical staining, with the advantages of GFP as a vital marker. The fusion proteins were functional in transient expression studies in tobacco using either DNA bombardment or potato virus X as a vector, and in stably transformed Arabidopsis thaliana and Lotus japonicus plants. The results show that high level of expression does not interfere with efficient stable transformation in A. thaliana and L. japonicus. Using confocal laser scanning microscopy we show that the fusion constructs are very suitable for promoter expression studies in all organs of living plants, including root nodules. The use of these reporter constructs in the model legume L. japonicus offers exciting new possibilities for the study of the root nodulation process.
NASA Astrophysics Data System (ADS)
Kim, Jae Gon
2017-04-01
Oxidation of sulfides produces acid rock drainage (ARD) upon their exposure to oxidation environment by construction and mining activities. The ARD causes the acidification and metal contamination of soil, surface water and groundwater, the damage of plant, the deterioration of landscape and the reduction of slope stability. The revegetation of slope surface is one of commonly adopted strategies to reduce erosion and to increase slope stability. However, the revegetation of the ARD producing slope surface is frequently failed due to its high acidity and toxic metal content. We developed a revegetation method consisting of microencapsualtion and artificial soil in the laboratory. The revegetation method was applied on the ARD producing slope on which the revegetation using soil coverage and seeding was failed and monitored the plant growth for one year. The phosphate solution was applied on sulfide containing rock to form stable Fe-phosphate mineral on the surface of sulfide, which worked as a physical barrier to prevent contacting oxidants such as oxygen and Fe3+ ion to the sulfide surface. After the microencapsulation, two artificial soil layers were constructed. The first layer containing organic matter, dolomite powder and soil was constructed at 2 cm thickness to neutralize the rising acidic capillary water from the subsurface and to remove the dissolved oxygen from the percolating rain water. Finally, the second layer containing seeds, organic matter, nutrients and soil was constructed at 3 cm thickness on the top. After application of the method, the pH of the soil below the artificial soil layer increased and the ARD production from the rock fragments reduced. The plant growth showed an ordinary state while the plant died two month after germination for the previous revegetation trial. No soil erosion occurred from the slope during the one year field test.
PREFACE: Nanobiology: from physics and engineering to biology
NASA Astrophysics Data System (ADS)
Nussinov, Ruth; Alemán, Carlos
2006-03-01
Biological systems are inherently nano in scale. Unlike nanotechnology, nanobiology is characterized by the interplay between physics, materials science, synthetic organic chemistry, engineering and biology. Nanobiology is a new discipline, with the potential of revolutionizing medicine: it combines the tools, ideas and materials of nanoscience and biology; it addresses biological problems that can be studied and solved by nanotechnology; it devises ways to construct molecular devices using biomacromolecules; and it attempts to build molecular machines utilizing concepts seen in nature. Its ultimate aim is to be able to predictably manipulate these, tailoring them to specified needs. Nanobiology targets biological systems and uses biomacromolecules. Hence, on the one hand, nanobiology is seemingly constrained in its scope as compared to general nanotechnology. Yet the amazing intricacy of biological systems, their complexity, and the richness of the shapes and properties provided by the biological polymers, enrich nanobiology. Targeting biological systems entails comprehension of how they work and the ability to use their components in design. From the physical standpoint, ultimately, if we are to understand biology we need to learn how to apply physical principles to figure out how these systems actually work. The goal of nanobiology is to assist in probing these systems at the appropriate length scale, heralding a new era in the biological, physical and chemical sciences. Biology is increasingly asking quantitative questions. Quantitation is essential if we are to understand how the cell works, and the details of its regulation. The physical sciences provide tools and strategies to obtain accurate measurements and simulate the information to allow comprehension of the processes. Nanobiology is at the interface of the physical and the biological sciences. Biology offers to the physical sciences fascinating problems, sophisticated systems and a rich repertoire of shapes and materials. Inspection of the protein structure databank illustrates the breadth of scaffolds, shapes and properties that protein molecules and their building blocks can provide. Via a shape-guided self-assembly strategy, these can be put together toward a specific function. Further, by inserting synthetic non-natural residues at judiciously selected positions, or synthetic peptide linkers, we may selectively rigidify the construct, or obtain a totally new world of shapes and scaffolds. Such broadening of the chemical space may lead to an almost unlimited range of nanosystems and architectures. Merging computation with experiment will accelerate nanodesign. Computational modeling will enhance the application of nanotechnology to key areas such as drug delivery and biomaterial design. Nanobiology is a field where interdisciplinary collaborations are essential and disciplines converge. Discipline convergence should enable the quantitation, leading to a better understanding of the regulatory networks within cells and between cells of an organism. These networks dictate how a cell responds to external stimuli, which in turn activate signaling cascades. It should allow the addressing of a broad range of questions on the structure and function of the cytoskeleton; the nuclear envelope; signal transduction by membrane embedded receptors; the nanomechanical properties of the extracellular matrix; nuclear transport; and voltage induced channel gating. For successful nanostructure design, we need to figure out and be able to control the intermolecular associations. For a stable functional construct, there are two key elements: first, the conformations of the building blocks in the designed structure should follow their natural tendencies; and second, the associations should be favorable. Molecules interact through their surfaces. Thus, favorable associations derive from shape complementarity and contributions of the various physical components. Nanobiology is in its infancy. Yet, biology provides an enormous range of engaging and stimulating problems with many in vivo examples of intricate, complex, fascinating biological systems. Understanding, mimicking and controlling the devices which target these processes and which are constructed from these molecules is a tremendous challenge to the converging disciplines in nanobiology.
Emergent fuzzy geometry and fuzzy physics in four dimensions
NASA Astrophysics Data System (ADS)
Ydri, Badis; Rouag, Ahlam; Ramda, Khaled
2017-03-01
A detailed Monte Carlo calculation of the phase diagram of bosonic mass-deformed IKKT Yang-Mills matrix models in three and six dimensions with quartic mass deformations is given. Background emergent fuzzy geometries in two and four dimensions are observed with a fluctuation given by a noncommutative U (1) gauge theory very weakly coupled to normal scalar fields. The geometry, which is determined dynamically, is given by the fuzzy spheres SN2 and SN2 × SN2 respectively. The three and six matrix models are effectively in the same universality class. For example, in two dimensions the geometry is completely stable, whereas in four dimensions the geometry is stable only in the limit M ⟶ ∞, where M is the mass of the normal fluctuations. The behaviors of the eigenvalue distribution in the two theories are also different. We also sketch how we can obtain a stable fuzzy four-sphere SN2 × SN2 in the large N limit for all values of M as well as models of topology change in which the transition between spheres of different dimensions is observed. The stable fuzzy spheres in two and four dimensions act precisely as regulators which is the original goal of fuzzy geometry and fuzzy physics. Fuzzy physics and fuzzy field theory on these spaces are briefly discussed.
ERIC Educational Resources Information Center
van Amsterdam, Noortje; Knoppers, Annelies; Jongmans, Marian
2015-01-01
In this paper, we explore how physically disabled youth who participate in mainstream education discursively construct and position themselves in relation to dominant discourses about sport and physicality that mark their bodies as "abnormal" and "deviant". We employ a feminist poststructuralist perspective to analyze the…
ERIC Educational Resources Information Center
Verscheure, Ingrid; Amade-Escot, Chantal
2007-01-01
Background: Research on gender in physical education has pointed out the social construction of gendered bodies and minds through the curriculum. It has been shown that girls do not benefit from equal opportunities to participate in physical activities. Developed within the theoretical framework of the "didactique" tradition, this paper…
Physical Education "of" and "through" Fitness and Skill
ERIC Educational Resources Information Center
Newell, Karl M.
2011-01-01
Fitness and skill are embedded constructs that have been the primary foci of the field of physical education. The emphasis of one of these constructs over the other is a matter of context that cannot, given their embedding, lead to the exclusivity of one in the education "of" and "through" the physical (Williams, 1930), particularly as we seek to…
ERIC Educational Resources Information Center
Ngai, Grace; Chan, Stephen C. F.; Leong, Hong Va; Ng, Vincent T. Y.
2013-01-01
This article presents the design and development of i*CATch, a construction kit for physical and wearable computing that was designed to be scalable, plug-and-play, and to provide support for iterative and exploratory learning. It consists of a standardized construction interface that can be adapted for a wide range of soft textiles or electronic…
NASA Astrophysics Data System (ADS)
Yan, Beibei; Wang, Yancai; Wang, Lulu; Zhou, Yuqi; Shang, Xueyun; Zhao, Juan; Liu, Yangyang; Du, Juan
2018-05-01
The present study aimed to prepare stable uc(dl)-tetrahydropalmatine (uc(dl)-THP) nanosuspensions of optimized formulation with PEGylated chitosan as a multifunctional stabilizer using the antisolvent precipitation method. A central composite design project of three factors and five-level full factorial (53) was applied to design the experimental program, and response surface methodology analysis was used to optimize the experimental conditions. The effects of critical influencing factors such as PEGylated chitosan concentration, operational temperature, and ultrasonic energy on particle size and zeta potential were investigated. Under the optimization nanosuspension formulation, the particle size was 269 nm and zeta potential was at 37.4 mV. Also, the uc(dl)-THP nanosuspensions maintained good physical stability after 2 months, indicating the potential ability of the multifunctional stabilizer for stable nanosuspension formulation. Hence, the present findings indicated that PEGylated chitosan could be used as the ideal stabilizer to form a physically stable nanosuspension formulation.
Dietary change and stable isotopes: a model of growth and dormancy in cave bears.
Lidén, K; Angerbjörn, A
1999-01-01
In order to discuss dietary change over time by the use of stable isotopes, it is necessary to sort out the underlying processes in isotopic variation. Together with the dietary signal other processes have been investigated, namely metabolic processes, collagen turnover and physical growth. However, growth and collagen turnover time have so far been neglected in dietary reconstruction based on stable isotopes. An earlier study suggested that cave bears (Ursus spelaeus) probably gave birth to cubs during dormancy. We provide an estimate of the effect on stable isotopes of growth and metabolism and discuss collagen turnover in a population of cave bears. Based on a quantitative model, we hypothesized that bear cubs lactated their mothers during their first and second winters, but were fed solid food together with lactation during their first summer. This demonstrates the need to include physical growth, metabolism and collagen turnover in dietary reconstruction. Whereas the effects of diet and metabolism are due to fractionation, growth and collagen turnover are dilution processes. PMID:10518325
2013-12-01
providing the opportunity to teach complex subjects related to stable and unstable equilibrium, stochastic systems, and conservation laws. The...bubbles through adjustment of three variables. The seal pressure, actuating pressure, and cycle time of the triggering solenoid valve each contribute to...stable and unstable equilibrium, stochastic systems, and conservation laws. The diaphragm valve designed in this thesis provides the centerpiece for
Predictors of Physical Activity among Adolescent Girl Students Based on the Social Cognitive Theory.
Ardestani, Monasadat; Niknami, Shamsaddin; Hidarnia, Alireza; Hajizadeh, Ebrahim
2015-01-01
The importance of increasing adolescence girl's level of physical activity is recognized as a priority for having a healthy lifestyle. However, adolescent girls especially Iranian, are at high risk for physical inactivity. Social Cognitive Theory (SCT) is a successful theory to explain physical activity behavior. The aim of this study was to determine the predictors of physical activity based on the SCT. This cross-sectional study was conducted among 400 adolescent girls (15-16 yr old) in Tehran, Iran (2013). The participants were randomly chosen with multistage sampling. The SCT constructs consisted of self-efficacy, self-regulation, social support, outcome expectancy, and self-efficacy to overcoming impediments. Statistical analysis was carried out applying SPSS: 16, LISREL 8.8. Stepwise regression was used to test predictors of behavior. Pearson correlation was assessed. Self efficacy to overcoming impediments was the main construct to predict physical activity (Beta=0.37). Other determinants were self-efficacy (Beta=0.29), family support (beta=0.14), outcome expectancy (beta=0.13), friend support (beta=0.12), and self-regulation (beta=0.11), respectively. In general, the SCT questionnaire determined 0.85 variation of physical activity behavior. All of the constructs had direct significant relation to physical activity behavior (P<0.001). The constructs of SCT provide a suitable framework to perform promoting physical activity programs and self-efficacy to overcoming impediments and self-efficacy are the best predictors of physical activity in adolescent girls.
NASA Astrophysics Data System (ADS)
McDonald, S. E.; Emmert, J. T.; Krall, J.; Mannucci, A. J.; Vergados, P.
2017-12-01
To understand how and why the distribution of geospace plasma in the ionosphere/plasmasphere is evolving over multi-decadal time scales in response to solar, heliospheric and atmospheric forcing, it is critically important to have long-term, stable datasets. In this study, we use a newly constructed dataset of GPS-based total electron content (TEC) developed by JPL. The JPL Global Ionosphere Mapping (GIM) algorithm was used to generate a 35-station dataset spanning two solar minimum periods (1993-2014). We also use altimeter-derived TEC measurements from TOPEX-Poseidon and Jason-1 to construct a continuous dataset for the 1995-2014 time period. Both longterm datasets are compared to each other to study interminimum changes in the global TEC (during 1995-1995 and 2008-2009). We use the SAMI3 physics-based model of the ionosphere to compare the simulations of 1995-2014 with the JPL TEC and TOPEX/Jason-1 datasets. To drive SAMI3, we use the Naval Research Laboratory Solar Spectral Irradiance (NRLSSI) model to specify the EUV irradiances, and NRLMSIS to specify the thermosphere. We adjust the EUV irradiances and thermospheric constituents to match the TEC datasets and draw conclusions regarding sources of the differences between the two solar minimum periods.
A Systematic Methodology for Constructing High-Order Energy-Stable WENO Schemes
NASA Technical Reports Server (NTRS)
Yamaleev, Nail K.; Carpenter, Mark H.
2008-01-01
A third-order Energy Stable Weighted Essentially Non-Oscillatory (ESWENO) finite difference scheme developed by Yamaleev and Carpenter (AIAA 2008-2876, 2008) was proven to be stable in the energy norm for both continuous and discontinuous solutions of systems of linear hyperbolic equations. Herein, a systematic approach is presented that enables \\energy stable" modifications for existing WENO schemes of any order. The technique is demonstrated by developing a one-parameter family of fifth-order upwind-biased ESWENO schemes; ESWENO schemes up to eighth order are presented in the appendix. New weight functions are also developed that provide (1) formal consistency, (2) much faster convergence for smooth solutions with an arbitrary number of vanishing derivatives, and (3) improved resolution near strong discontinuities.
A Systematic Methodology for Constructing High-Order Energy Stable WENO Schemes
NASA Technical Reports Server (NTRS)
Yamaleev, Nail K.; Carpenter, Mark H.
2009-01-01
A third-order Energy Stable Weighted Essentially Non{Oscillatory (ESWENO) finite difference scheme developed by Yamaleev and Carpenter [1] was proven to be stable in the energy norm for both continuous and discontinuous solutions of systems of linear hyperbolic equations. Herein, a systematic approach is presented that enables "energy stable" modifications for existing WENO schemes of any order. The technique is demonstrated by developing a one-parameter family of fifth-order upwind-biased ESWENO schemes; ESWENO schemes up to eighth order are presented in the appendix. New weight functions are also developed that provide (1) formal consistency, (2) much faster convergence for smooth solutions with an arbitrary number of vanishing derivatives, and (3) improved resolution near strong discontinuities.
More, Apurva S; Toprani, Vishal M; Okbazghi, Solomon Z; Kim, Jae H; Joshi, Sangeeta B; Middaugh, C Russell; Tolbert, Thomas J; Volkin, David B
2016-02-01
As part of a series of articles in this special issue describing 4 well-defined IgG1-Fc glycoforms as a model system for biosimilarity analysis (high mannose-Fc, Man5-Fc, GlcNAc-Fc and N297Q-Fc aglycosylated), the focus of this work is comparisons of their physical properties. A trend of decreasing apparent solubility (thermodynamic activity) by polyethylene glycol precipitation (pH 4.5, 6.0) and lower conformational stability by differential scanning calorimetry (pH 4.5) was observed with reducing size of the N297-linked oligosaccharide structures. Using multiple high-throughput biophysical techniques, the physical stability of the Fc glycoproteins was then measured in 2 formulations (NaCl and sucrose) across a wide range of temperatures (10°C-90°C) and pH (4.0-7.5) conditions. The data sets were used to construct 3-index empirical phase diagrams and radar charts to visualize the regions of protein structural stability. Each glycoform showed improved stability in the sucrose (vs. salt) formulation. The HM-Fc and Man5-Fc displayed the highest relative stability, followed by GlcNAc-Fc, with N297Q-Fc being the least stable. Thus, the overall physical stability profiles of the 4 IgG1-Fc glycoforms also show a correlation with oligosaccharide structure. These data sets are used to develop a mathematical model for biosimilarity analysis (as described in a companion article by Kim et al. in this issue). Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.
Shuval, Kerem; Kohl, Harold W; Bernstein, Ira; Cheng, Dunlei; Pettee Gabriel, Kelley; Barlow, Carolyn E; Yinghui, Liu; DiPietro, Loretta
2014-02-01
The emerging evidence of the effects of sedentary time on health outcomes suggests a need to better measure this exposure. Healthcare settings, however, are not equipped with a tool that can quickly assess the sedentary habits of their patient population. The purpose of this study was to validate a tool for rapidly quantifying and tracking the sedentary time and low levels of daily lifestyle physical activity among primary care patients. The study examined the test-retest reliability and validity of the rapid assessment disuse index (RADI) among adult patients from a large primary care clinic. Patients completed RADI (comprised of 3 items: sitting, moving and stair climbing) twice, followed by accelerometer monitoring. Test-retest reliability was computed, and the correlation between survey responses and accelerometry was determined. A receiver operating characteristic curve was constructed and the area under the curve (AUC) was calculated. RADI was temporally stable (intraclass correlation coefficients 0.79), and a higher score was significantly correlated with greater sedentary time (ρ=0.40; p<0.01), fewer sedentary to active transitions (ρ=-0.42; p<0.01), and less light-intensity physical activity (ρ=-0.40; p<0.01). The ability of RADI to detect patients with high levels of sedentary time was fair (AUC=0.72). This brief assessment tool, designed to quickly identify patients with high levels of sitting and low daily physical activity, exhibits good reliability and moderate validity. RADI can assist in providing recommendations at the point of care pertaining to modifying sedentary behaviour.
NASA Astrophysics Data System (ADS)
Tuske, O.; Chauvin, N.; Delferriere, O.; Fils, J.; Gauthier, Y.
2018-05-01
The CEA at Saclay is in charge of developing and building the ion source and the low energy line of the proton linac of the FAIR (Facility for Antiproton and Ion Research) accelerator complex located at GSI (Darmstadt) in Germany. The FAIR facility will deliver stable and rare isotope beams covering a huge range of intensities and beam energies for experiments in the fields of atomic physics, plasma physics, nuclear physics, hadron physics, nuclear matter physics, material physics, and biophysics. A significant part of the experimental program at FAIR is dedicated to antiproton physics that requires an ultimate number 7 × 1010 cooled pbar/h. The high-intensity proton beam that is necessary for antiproton production will be delivered by a dedicated 75 mA/70 MeV proton linac. A 2.45 GHz microwave ion source will deliver a 100 mA H+ beam pulsed at 4 Hz with an energy of 95 keV. A 2 solenoids low energy beam transport line allows the injection of the proton beam into the radio frequency quadrupole (RFQ) within an acceptance of 0.3π mm mrad (norm. rms). An electrostatic chopper system located between the second solenoid and the RFQ is used to cut the beam macro-pulse from the source to inject 36 μs long beam pulses into the RFQ. At present time, a Ladder-RFQ is under construction at the University of Frankfurt. This article reports the first beam measurements obtained since mid of 2016. Proton beams have been extracted from the ECR ion source and analyzed just after the extraction column on a dedicated diagnostic chamber. Emittance measurements as well as extracted current and species proportion analysis have been performed in different configurations of ion source parameters, such as magnetic field profile, radio frequency power, gas injection, and puller electrode voltage.
ERIC Educational Resources Information Center
Lo, Hao-Chang
2013-01-01
The objective of this study was to develop an online report writing activity that was a constructive and cooperative learning process for a course on traditional general physics experiments. Wiki, a CMC authoring tool, was used to construct the writing platform. Fifty-eight undergraduate students (33 men and 25 women), working in randomly assigned…
NASA Astrophysics Data System (ADS)
Takamatsu, Atsuko
2006-11-01
Three-oscillator systems with plasmodia of true slime mold, Physarum polycephalum, which is an oscillatory amoeba-like unicellular organism, were experimentally constructed and their spatio-temporal patterns were investigated. Three typical spatio-temporal patterns were found: rotation ( R), partial in-phase ( PI), and partial anti-phase with double frequency ( PA). In pattern R, phase differences between adjacent oscillators were almost 120 ∘. In pattern PI, two oscillators were in-phase and the third oscillator showed anti-phase against the two oscillators. In pattern PA, two oscillators showed anti-phase and the third oscillator showed frequency doubling oscillation with small amplitude. Actually each pattern is not perfectly stable but quasi-stable. Interestingly, the system shows spontaneous switching among the multiple quasi-stable patterns. Statistical analyses revealed a characteristic in the residence time of each pattern: the histograms seem to have Gamma-like distribution form but with a sharp peak and a tail on the side of long period. That suggests the attractor of this system has complex structure composed of at least three types of sub-attractors: a “Gamma attractor”-involved with several Poisson processes, a “deterministic attractor”-the residence time is deterministic, and a “stable attractor”-each pattern is stable. When the coupling strength was small, only the Gamma attractor was observed and switching behavior among patterns R, PI, and PA almost always via an asynchronous pattern named O. A conjecture is as follows: Internal/external noise exposes each pattern of R, PI, and PA coexisting around bifurcation points: That is observed as the Gamma attractor. As coupling strength increases, the deterministic attractor appears then followed by the stable attractor, always accompanied with the Gamma attractor. Switching behavior could be caused by regular existence of the Gamma attractor.
Two-level schemes for the advection equation
NASA Astrophysics Data System (ADS)
Vabishchevich, Petr N.
2018-06-01
The advection equation is the basis for mathematical models of continuum mechanics. In the approximate solution of nonstationary problems it is necessary to inherit main properties of the conservatism and monotonicity of the solution. In this paper, the advection equation is written in the symmetric form, where the advection operator is the half-sum of advection operators in conservative (divergent) and non-conservative (characteristic) forms. The advection operator is skew-symmetric. Standard finite element approximations in space are used. The standard explicit two-level scheme for the advection equation is absolutely unstable. New conditionally stable regularized schemes are constructed, on the basis of the general theory of stability (well-posedness) of operator-difference schemes, the stability conditions of the explicit Lax-Wendroff scheme are established. Unconditionally stable and conservative schemes are implicit schemes of the second (Crank-Nicolson scheme) and fourth order. The conditionally stable implicit Lax-Wendroff scheme is constructed. The accuracy of the investigated explicit and implicit two-level schemes for an approximate solution of the advection equation is illustrated by the numerical results of a model two-dimensional problem.
Caban-Martinez, Alberto J; Santiago, Katerina M; Stillman, Jordan; Moore, Kevin J; Sierra, Danielle A; Chalmers, Juanita; Baniak, Melissa; Jordan, Melissa M
2018-04-01
We characterize and compare the self-reported physical exposures, work tasks, and OSHA-10 training in a non-probabilistic sample of temporary and payroll construction workers. In June 2016, a total of 250 payroll and temporary general laborers employed at Florida construction sites completed a survey at the job site as part of the falls reported among minority employees (FRAME) study. Workers employed through temp agencies (57.1%) were significantly more likely to report moving or lifting materials more than 100 pounds than payroll workers (38.5%; P < 0.01). Temporary construction workers with 10-hour OSHA training (22.2%) spent significantly less time with intense hand use/awkward hand posture than temporary workers without 10-hour OSHA training (46.9%; P = 0.048). Temp construction workers with OSHA 10-hour training reported less hazardous physical postures than workers without the same training.
NASA Astrophysics Data System (ADS)
Remo, Jonathan W. F.; Khanal, Anish; Pinter, Nicholas
2013-09-01
Blunt-nosed chevron dikes, a new invention now being widely constructed on the Middle Mississippi River (MMR), have been justified as a tool for enhancing physical-aquatic habitat. Chevron dikes were initially designed to concentrate flow, induce channel scour, and thus facilitate river navigation. More recently, these structures have been justified, in part, for promoting habitat heterogeneity. The ability of chevrons to create and diversify physical-aquatic habitat, however, has not been empirically evaluated. To assess the ability of chevrons to create and diversify physical-aquatic habitat, we compiled hydrologic and geospatial data for three channel reference conditions along a 2.0 km (∼140 ha) reach of the MMR where three chevrons were constructed in late 2007. We used the hydrologic and hydraulic data to construct detailed 2-D hydrodynamic models for three reference condition: historic (circa 1890), pre-chevron, and post-chevron channel conditions. These models documented changes in depths and flow dynamics for a wide range of in-channel discharges. Depth-velocity habitat classes were used to assess change in physical-aquatic habitat patches and spatial statistical tools in order to evaluate the reach-scale habitat patch diversity. Comparisons of pre- and post-chevron conditions revealed increases in deep to very deep (>3.0 m) areas of slow moving (<0.6 m/s) water downstream of these structures under emergent flow conditions (⩽1.5 × mean annual flow [MAF]). Chevron construction added up to 7.6 ha of potential over-wintering habitat (deep [>3.0 m], low velocity [<0.6 m/s]). Chevron construction also created some (0.8-3.8 ha) shallow-water habitat (0-1.5 m depth with a 0-0.6 m/s velocity) for flows ⩽2.0 × MAF and contributed to an 8-35% increase in physical-aquatic-habitat diversity compared to pre-chevron channel conditions. However, modeling of the historic reference condition (less engineered channel, circa 1890) revealed that the historical physical-aquatic-habitat mosaic consisted of a wider and shallower channel with: 45-390% more shallow-water habitat (2.4-11.0 ha) and 22-83% more physical-aquatic-habitat diversity, but little over-wintering habitat (<0.4 ha). Thus, while chevron construction increased over-wintering habitat, shallow-water habitat, and physical-aquatic-habitat diversity relative to the pre-chevron channel condition, these types of physical-aquatic habitat are different from what was historically found along this reach. Constructing chevrons dikes, or other dike-like structures in the river channel, can change the physical-aquatic habitat patch mosaic and likely contribute to small increases in physical-aquatic-habitat heterogeneity. However, differences in the types, quantity, and diversity of physical-aquatic-habitat patches created by chevron dikes in comparison to the physical-aquatic-habitat patch mosaic of historic channel underscore the need for additional research to determine which physical-aquatic-habitat patches are critical for the recovery of endangered or threatened aquatic organisms.
Explanation-based learning in infancy.
Baillargeon, Renée; DeJong, Gerald F
2017-10-01
In explanation-based learning (EBL), domain knowledge is leveraged in order to learn general rules from few examples. An explanation is constructed for initial exemplars and is then generalized into a candidate rule that uses only the relevant features specified in the explanation; if the rule proves accurate for a few additional exemplars, it is adopted. EBL is thus highly efficient because it combines both analytic and empirical evidence. EBL has been proposed as one of the mechanisms that help infants acquire and revise their physical rules. To evaluate this proposal, 11- and 12-month-olds (n = 260) were taught to replace their current support rule (that an object is stable when half or more of its bottom surface is supported) with a more sophisticated rule (that an object is stable when half or more of the entire object is supported). Infants saw teaching events in which asymmetrical objects were placed on a base, followed by static test displays involving a novel asymmetrical object and a novel base. When the teaching events were designed to facilitate EBL, infants learned the new rule with as few as two (12-month-olds) or three (11-month-olds) exemplars. When the teaching events were designed to impede EBL, however, infants failed to learn the rule. Together, these results demonstrate that even infants, with their limited knowledge about the world, benefit from the knowledge-based approach of EBL.
... size. Orthotic devices. If the fibroma is stable, meaning it is not changing in size, custom orthotic devices (shoe inserts) may relieve the pain by distributing the patient’s weight away from the fibroma. Physical therapy. The pain is sometimes treated through physical ...
Mental health trajectories among women in Australia as they age.
Tran, Thach; Hammarberg, Karin; Ryan, Joanne; Lowthian, Judy; Freak-Poli, Rosanne; Owen, Alice; Kirkman, Maggie; Curtis, Andrea; Rowe, Heather; Brown, Helen; Ward, Stephanie; Britt, Carlene; Fisher, Jane
2018-05-23
To ascertain the trajectories of mental health among women in Australia assessed in repeat waves from their early 70 s to the end of their lives or their mid 80 s. Secondary analysis of data contributed by the 1921-26 cohort of the Australian Longitudinal Study of Women's Health Waves 1-6. Primary outcome was the 4-item SF-36 Vitality Subscale, which assesses mental health as life satisfaction, social participation, energy and enthusiasm. Structural, individual and intermediary factors were assessed using study-specific and standardised measures. Trajectories were identified using Growth Mixture Modelling and associations with baseline characteristics with Structural Equation Modelling. 12,432 women completed Survey One. Three mental health trajectories: stable high (77%); stable low (18.2%) and declining from high to low (4.8%) were identified. Compared to the stable high group, women in the stable low group were significantly less physically active, had more nutritional risks, more recent adverse life events, fewer social interactions and less social support, reported more stress and were more likely to have a serious illness or disability at Survey One. The declining group had similar characteristics to the stable high group, but were significantly more likely to report at baseline that they had experienced recent financial, physical and emotional elder abuse. These interact, but not directly with socioeconomic position and marital status. Mental health among older women is related to social relationships, general health, access to physical activity and healthy nutrition, coincidental adverse life events and experiences of interpersonal violence, in particular elder abuse.
Code of Federal Regulations, 2011 CFR
2011-07-01
...) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Cranes and Derricks in Construction Pt. 1926, Subpt. CC... risk of unintended dangerous movement while the pins are removed, the A/D director uses an assist crane... place using an assist crane. The A/D director's plan is to keep the boom sections stable while they are...
Lunar concrete for construction
NASA Technical Reports Server (NTRS)
Cullingford, Hatice S.; Keller, M. Dean
1992-01-01
Feasibility of using concrete for lunar base construction was discussed recently without relevant data for the effects of vacuum on concrete. Our experimental studies performed earlier at Los Alamos have shown that concrete is stable in vacuum with no deterioration of its quality as measured by the compressive strength. Various considerations of using concrete successfully on the Moon are provided in this paper, along with specific conclusions from the existing database.
Physical Activity and Mortality in Patients With Stable Coronary Heart Disease.
Stewart, Ralph A H; Held, Claes; Hadziosmanovic, Nermin; Armstrong, Paul W; Cannon, Christopher P; Granger, Christopher B; Hagström, Emil; Hochman, Judith S; Koenig, Wolfgang; Lonn, Eva; Nicolau, José C; Steg, Philippe Gabriel; Vedin, Ola; Wallentin, Lars; White, Harvey D
2017-10-03
Recommendations for physical activity in patients with stable coronary heart disease (CHD) are based on modest evidence. The authors analyzed the association between self-reported exercise and mortality in patients with stable CHD. A total of 15,486 patients from 39 countries with stable CHD who participated in the STABILITY (Stabilization of Atherosclerotic Plaque by Initiation of Darapladib Therapy) study completed questions at baseline on hours spent each week taking mild, moderate, and vigorous exercise. Associations between the volume of habitual exercise in metabolic equivalents of task hours/week and adverse outcomes during a median follow-up of 3.7 years were evaluated. A graded decrease in mortality occurred with increased habitual exercise that was steeper at lower compared with higher exercise levels. Doubling exercise volume was associated with lower all-cause mortality (unadjusted hazard ratio [HR]: 0.82; 95% confidence interval [CI]: 0.79 to 0.85; adjusting for covariates, HR: 0.90; 95% CI: 0.87 to 0.93). These associations were similar for cardiovascular mortality (unadjusted HR: 0.83; 95% CI: 0.80 to 0.87; adjusted HR: 0.92; 95% CI: 0.88 to 0.96), but myocardial infarction and stroke were not associated with exercise volume after adjusting for covariates. The association between decrease in mortality and greater physical activity was stronger in the subgroup of patients at higher risk estimated by the ABC-CHD (Age, Biomarkers, Clinical-Coronary Heart Disease) risk score (p for interaction = 0.0007). In patients with stable CHD, more physical activity was associated with lower mortality. The largest benefits occurred between sedentary patient groups and between those with the highest mortality risk. Copyright © 2017 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.
Feasibility of self-correcting quantum memory and thermal stability of topological order
DOE Office of Scientific and Technical Information (OSTI.GOV)
Yoshida, Beni, E-mail: rouge@mit.edu
2011-10-15
Recently, it has become apparent that the thermal stability of topologically ordered systems at finite temperature, as discussed in condensed matter physics, can be studied by addressing the feasibility of self-correcting quantum memory, as discussed in quantum information science. Here, with this correspondence in mind, we propose a model of quantum codes that may cover a large class of physically realizable quantum memory. The model is supported by a certain class of gapped spin Hamiltonians, called stabilizer Hamiltonians, with translation symmetries and a small number of ground states that does not grow with the system size. We show that themore » model does not work as self-correcting quantum memory due to a certain topological constraint on geometric shapes of its logical operators. This quantum coding theoretical result implies that systems covered or approximated by the model cannot have thermally stable topological order, meaning that systems cannot be stable against both thermal fluctuations and local perturbations simultaneously in two and three spatial dimensions. - Highlights: > We define a class of physically realizable quantum codes. > We determine their coding and physical properties completely. > We establish the connection between topological order and self-correcting memory. > We find they do not work as self-correcting quantum memory. > We find they do not have thermally stable topological order.« less
NASA Astrophysics Data System (ADS)
Qin, Hong
2016-10-01
Many of the classical particle-field systems in (neutral and nonneutral) plasma physics and accelerator physics become unstable when the system parameters vary. How do these instabilities happen? It turns out, very interestingly, that all conservative systems become unstable by the same mechanism, i.e, the resonance between a positive- and a negative-action modes. And this is the only route that a stable system can become unstable. In this talk, I will use several examples in plasma physics and accelerator physics with finite and infinite degrees of freedom to illustrate the basic physical picture and the rigorous theoretical structure of the process. The features at the transition between stable and unstable regions in the parameter space are the fundamental characteristics of the underlying real Hamiltonian system and complex G-Hamiltonian system. The resonance between a positive- and a negative-action modes at the transition is the Krein collision well-known to mathematicians. Research supported by the U.S. Department of Energy (DE-AC02-09CH11466).
Internal consistency and validity of a new physical workload questionnaire
Bot, S; Terwee, C; van der Windt, D A W M; Feleus, A; Bierma-Zeinstra, S; Knol, D; Bouter, L; Dekker, J
2004-01-01
Aims: To examine the dimensionality, internal consistency, and construct validity of a new physical workload questionnaire in employees with musculoskeletal complaints. Methods: Factor analysis was applied to the responses in three study populations with musculoskeletal disorders (n = 406, 300, and 557) on 26 items related to physical workload. The internal consistency of the resulting subscales was examined. It was hypothesised that physical workload would vary among different occupational groups. The occupations of all subjects were classified into four groups on the basis of expected workload (heavy physical load; long lasting postures and repetitive movements; both; no physical load). Construct validity of the subscales created was tested by comparing the subscale scores among these occupational groups. Results: The pattern of the factor loadings of items was almost identical for the three study populations. Two interpretable factors were found: items related to heavy physical workload loaded highly on the first factor, and items related to static postures or repetitive work loaded highly on the second factor. The first constructed subscale "heavy physical work" had a Cronbach's α of 0.92 to 0.93 and the second subscale "long lasting postures and repetitive movements", of 0.86 to 0.87. Six of eight hypotheses regarding the construct validity of the subscales were confirmed. Conclusions: The results support the internal structure, internal consistency, and validity of the new physical workload questionnaire. Testing this questionnaire in non-symptomatic employees and comparing its performance with objective assessments of physical workload are important next steps in the validation process. PMID:15550603
Jarvie, Jennifer L; Whooley, Mary A; Regan, Mathilda C; Sin, Nancy L; Cohen, Beth E
2014-10-15
Higher levels of physical activity are associated with lower rates of coronary heart disease (CHD). Previous studies have suggested that this is due partly to lower levels of inflammation and insulin resistance. The aim of this study was to determine whether physical activity level was associated with inflammation or insulin resistance during a 5-year period in outpatients with known CHD. A total of 656 participants from the Heart and Soul Study, a prospective cohort study of outpatients with documented CHD, were evaluated. Self-reported physical activity frequency was assessed at baseline and after 5 years of follow-up. Participants were classified as low versus high activity at each visit, yielding 4 physical activity groups: stable low activity, decreasing activity (high at baseline to low at year 5), increasing activity (low at baseline to high at year 5), and stable high activity. Year 5 markers of inflammation (C-reactive protein [CRP], interleukin-6, and fibrinogen) and insulin resistance (insulin, glucose, and glycated hemoglobin) were compared across the 4 activity groups. After 5 years of follow-up, higher activity was associated with lower mean levels of all biomarkers. In the fully adjusted regression models, CRP, interleukin-6, and glucose remained independently associated with physical activity frequency (log CRP, p for trend across activity groups = 0.03; log interleukin-6, p for trend = 0.01; log glucose, p for trend = 0.003). Subjects with stable high activity typically had the lowest levels of biomarkers. In conclusion, in this novel population of outpatients with known CHD followed for 5 years, higher physical activity frequency was independently associated with lower levels of CRP, interleukin-6, and glucose. Copyright © 2014 Elsevier Inc. All rights reserved.
ERIC Educational Resources Information Center
Jackson, Allen W.; Morrow, James R., Jr.; Bowles, Heather R.; FitzGerald, Shannon J.; Blair, Steven N.
2007-01-01
Valid measurement of physical activity is important for studying the risks for morbidity and mortality. The purpose of this study was to examine evidence of construct validity of two similar single-response items assessing physical activity via self-report. Both items are based on the stages of change model. The sample was 687 participants (men =…
2011-01-01
Background Bioluminescent tumor cell lines are experimental tools of major importance for cancer investigation, especially imaging of tumors in xenografted animals. Stable expression of exogenous luciferase in tumor cells combined to systemic injection of luciferin provides an excellent signal/background ratio for external optical imaging. Therefore, there is a need to rationalize and speed up the production of luciferase-positive tumor cell lines representative of multiple tumor phenotypes. For this aim we have designed a fusion gene linking the luciferase 2 protein to the c-terminus of a truncated form of the rat CD2 protein (tCD2-luc2). To allow simultaneous assessment of the wild-type luciferase 2 in a context of tCD2 co-expression, we have made a bicistronic construct for concomitant but separate expression of these two proteins (luc2-IRES-tCD2). Both the mono- and bi-cistronic constructs were transduced in lymphoid and epithelial cells using lentiviral vectors. Results The tCD2-luc2 chimera behaves as a type I membrane protein with surface presentation of CD2 epitopes. One of these epitopes reacts with the OX34, a widely spread, high affinity monoclonal antibody. Stably transfected cells are sorted by flow cytometry on the basis of OX34 staining. In vitro and, moreover, in xenografted tumors, the tCD2-luc2 chimera retains a substantial and stable luciferase activity, although not as high as the wild-type luciferase expressed from the luc2-IRES-tCD2 construct. Expression of the tCD2-luc2 chimera does not harm cell and tumor growth. Conclusion Lentiviral transduction of the chimeric tCD2-luc2 fusion gene allows selection of cell clones with stable luciferase expression in less than seven days without antibiotic selection. We believe that it will be helpful to increase the number of tumor cell lines available for in vivo imaging and assessment of novel therapeutic modalities. On a longer term, the tCD2-luc2 chimera has the potential to be expressed from multi-cassette vectors in combination with various inserts of interest. PMID:21435248
Ewalt, Lauren A; Danduran, Michael J; Strath, Scott J; Moerchen, Victoria; Swartz, Ann M
2012-02-01
To objectively evaluate and describe physical activity levels in children with a stable congenital heart defect and compare those levels with children who do not have a congenital heart defect. We matched 21 pairs of children for gender and grade in school and gave them an accelerometer-based motion sensor to wear for 7 consecutive days. Physical activity levels did not differ between children with and without a congenital heart defect. During the 7 days of monitoring, children in this study spent most of their time in sedentary behaviours, that is, 6.7 hours of the 13 monitored hours, 54 minutes in moderate-intensity physical activity, and 12 minutes in vigorous-intensity physical activity. Less than one-fifth of all participants, with or without a congenital heart defect, accumulated sufficient physical activity to meet current physical activity recommendations for children and adolescents. Children with a stable congenital heart defect have activity behaviours that are similar to children without a congenital heart defect. Habitual physical activity in children with a congenital heart defect should be encouraged early on in life to develop strong physical activity habits that will hopefully follow them across their lifespan.
Construct Validation of the Physics Metacognition Inventory
NASA Astrophysics Data System (ADS)
Taasoobshirazi, Gita; Farley, John
2013-02-01
The 24-item Physics Metacognition Inventory was developed to measure physics students' metacognition for problem solving. Items were classified into eight subcomponents subsumed under two broader components: knowledge of cognition and regulation of cognition. The students' scores on the inventory were found to be reliable and related to students' physics motivation and physics grade. An exploratory factor analysis provided evidence of construct validity, revealing six components of students' metacognition when solving physics problems including: knowledge of cognition, planning, monitoring, evaluation, debugging, and information management. Although women and men differed on the components, they had equivalent overall metacognition for problem solving. The implications of these findings for future research are discussed.
Model based manipulator control
NASA Technical Reports Server (NTRS)
Petrosky, Lyman J.; Oppenheim, Irving J.
1989-01-01
The feasibility of using model based control (MBC) for robotic manipulators was investigated. A double inverted pendulum system was constructed as the experimental system for a general study of dynamically stable manipulation. The original interest in dynamically stable systems was driven by the objective of high vertical reach (balancing), and the planning of inertially favorable trajectories for force and payload demands. The model-based control approach is described and the results of experimental tests are summarized. Results directly demonstrate that MBC can provide stable control at all speeds of operation and support operations requiring dynamic stability such as balancing. The application of MBC to systems with flexible links is also discussed.
NASA Astrophysics Data System (ADS)
Kiyohara, Shin; Mizoguchi, Teruyasu
2018-03-01
Grain boundary segregation of dopants plays a crucial role in materials properties. To investigate the dopant segregation behavior at the grain boundary, an enormous number of combinations have to be considered in the segregation of multiple dopants at the complex grain boundary structures. Here, two data mining techniques, the random-forests regression and the genetic algorithm, were applied to determine stable segregation sites at grain boundaries efficiently. Using the random-forests method, a predictive model was constructed from 2% of the segregation configurations and it has been shown that this model could determine the stable segregation configurations. Furthermore, the genetic algorithm also successfully determined the most stable segregation configuration with great efficiency. We demonstrate that these approaches are quite effective to investigate the dopant segregation behaviors at grain boundaries.
Sebire, Simon J; Jago, Russell; Fox, Kenneth R; Edwards, Mark J; Thompson, Janice L
2013-09-26
Understanding children's physical activity motivation, its antecedents and associations with behavior is important and can be advanced by using self-determination theory. However, research among youth is largely restricted to adolescents and studies of motivation within certain contexts (e.g., physical education). There are no measures of self-determination theory constructs (physical activity motivation or psychological need satisfaction) for use among children and no previous studies have tested a self-determination theory-based model of children's physical activity motivation. The purpose of this study was to test the reliability and validity of scores derived from scales adapted to measure self-determination theory constructs among children and test a motivational model predicting accelerometer-derived physical activity. Cross-sectional data from 462 children aged 7 to 11 years from 20 primary schools in Bristol, UK were analysed. Confirmatory factor analysis was used to examine the construct validity of adapted behavioral regulation and psychological need satisfaction scales. Structural equation modelling was used to test cross-sectional associations between psychological need satisfaction, motivation types and physical activity assessed by accelerometer. The construct validity and reliability of the motivation and psychological need satisfaction measures were supported. Structural equation modelling provided evidence for a motivational model in which psychological need satisfaction was positively associated with intrinsic and identified motivation types and intrinsic motivation was positively associated with children's minutes in moderate-to-vigorous physical activity. The study provides evidence for the psychometric properties of measures of motivation aligned with self-determination theory among children. Children's motivation that is based on enjoyment and inherent satisfaction of physical activity is associated with their objectively-assessed physical activity and such motivation is positively associated with perceptions of psychological need satisfaction. These psychological factors represent potential malleable targets for interventions to increase children's physical activity.
Howle, Timothy C; Dimmock, James A; Whipp, Peter R; Jackson, Ben
2015-06-01
With the aim of advancing the literature on impression management in physical activity settings, we developed a theoretically derived 2 by 2 instrument that was designed to measure different types of context-specific self-presentation motives. Following item generation and expert review (Study 1), the instrument was completed by 206 group exercise class attendees (Study 2) and 463 high school physical education students (Study 3). Our analyses supported the intended factor structure (i.e., reflecting acquisitive-agentic, acquisitive-communal, protective-agentic, and protective-communal motives). We found some support for construct validity, and the self-presentation motives were associated with variables of theoretical and applied interest (e.g., impression motivation and construction, social anxiety, social and achievement goals, efficacy beliefs, engagement). Taken together, the results indicate that the Self-presentation Motives for Physical Activity Questionnaire (SMPAQ) may be useful for measuring various types of self-presentation motives in physical activity settings.
ERIC Educational Resources Information Center
Vick, Matthew E.
2010-01-01
The University of Colorado's Physics Education Technology (PhET) website offers free, high-quality simulations of many physics experiments that can be used in the classroom. The Circuit Construction Kit, for example, allows students to safely and constructively play with circuit components while learning the mathematics behind many circuit…
A de Sitter tachyonic braneworld revisited
NASA Astrophysics Data System (ADS)
Barbosa-Cendejas, Nandinii; Cartas-Fuentevilla, Roberto; Herrera-Aguilar, Alfredo; Rigel Mora-Luna, Refugio; da Rocha, Roldão
2018-01-01
Within the framework of braneworlds, several interesting physical effects can be described in a wide range of energy scales, starting from high-energy physics to cosmology and low-energy physics. An usual way to generate a thick braneworld model relies in coupling a bulk scalar field to higher dimensional warped gravity. Quite recently, a novel braneworld was generated with the aid of a tachyonic bulk scalar field, having several remarkable properties. It comprises a regular and stable solution that contains a relevant 3-brane with de Sitter induced metric, arising as an exact solution to the 5D field equations, describing the inflationary eras of our Universe. Besides, it is asymptotically flat, despite of the presence of a negative 5D cosmological constant, which is an interesting feature that contrasts with most of the known, asymptotically either dS or AdS models. Moreover, it encompasses a graviton spectrum with a single massless bound state, accounting for 4D gravity localized on the brane, separated from the continuum of Kaluza-Klein massive graviton modes by a mass gap that makes the 5D corrections to Newton's law to decay exponentially. Finally, gauge, scalar and fermion fields are also shown to be localized on this braneworld. In this work, we show that this tachyonic braneworld allows for a nontrivial solution with a vanishing 5D cosmological constant that preserves all the above mentioned remarkable properties with a less amount of parameters, constituting an important contribution to the construction of a realistic cosmological braneworld model.
At-risk symptoms of bipolar disorder in a university student cohort.
Haussleiter, Ida S; Lorek, Sandra; Zeschel, Eike; Mattausch, Svenja; Meyers, Milena; Juckel, Georg
2018-05-06
To assess the occurrence and frequency of bipolar at-risk symptoms in a large sample of previously undiagnosed students using the new screening tool Bochumer Screeningbogen Bipolar (BSB). 2329 students of the Ruhr-University Bochum, Germany completed online demographic data as well as various self-rating questionnaires (BSB; Hypomania Checklist 32; Altman Self-Rating Mania Scale; Beck Depression Inventory). Within the student cohort (64.4% female, mean age 24.3 years) every fifth student currently suffered from moderate to severe depressive symptoms; every sixth student had already thought about suicide and every other student reported a history of mood swings. The most frequently reported depressive symptoms included physical exhaustion, depressed mood, and tiredness. The most frequently reported (hypo)manic symptoms included physical agitation, feeling extremely energetic, and lack of concentration. The BSB showed good convergent validity with other established questionnaires capturing depressive or (hypo)manic symptoms, as well as a stable administration of underlying constructs. The BSB correlated significantly with the already established applied questionnaires. The predictive power of the BSB regarding the development of bipolar disorder cannot be correctly quantified at present. The further purpose of this exploratory web-based study should be to examine the validity of the presented measures in a longitudinal design. Copyright © 2018 Elsevier B.V. All rights reserved.
Automatic paper sliceform design from 3D solid models.
Le-Nguyen, Tuong-Vu; Low, Kok-Lim; Ruiz, Conrado; Le, Sang N
2013-11-01
A paper sliceform or lattice-style pop-up is a form of papercraft that uses two sets of parallel paper patches slotted together to make a foldable structure. The structure can be folded flat, as well as fully opened (popped-up) to make the two sets of patches orthogonal to each other. Automatic design of paper sliceforms is still not supported by existing computational models and remains a challenge. We propose novel geometric formulations of valid paper sliceform designs that consider the stability, flat-foldability and physical realizability of the designs. Based on a set of sufficient construction conditions, we also present an automatic algorithm for generating valid sliceform designs that closely depict the given 3D solid models. By approximating the input models using a set of generalized cylinders, our method significantly reduces the search space for stable and flat-foldable sliceforms. To ensure the physical realizability of the designs, the algorithm automatically generates slots or slits on the patches such that no two cycles embedded in two different patches are interlocking each other. This guarantees local pairwise assembility between patches, which is empirically shown to lead to global assembility. Our method has been demonstrated on a number of example models, and the output designs have been successfully made into real paper sliceforms.
Phospholipid Polymer Biointerfaces for Lab-on-a-Chip Devices.
Xu, Yan; Takai, Madoka; Ishihara, Kazuhiko
2010-06-01
This review summarizes recent achievements and progress in the development of various functional 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer biointerfaces for lab-on-a-chip devices and applications. As phospholipid polymers, MPC polymers can form cell-membrane-like surfaces by surface chemistry and physics and thereby provide biointerfaces capable of suppressing protein adsorption and many subsequent biological responses. In order to enable application to microfluidic devices, a number of MPC polymers with diverse functions have been specially designed and synthesized by incorporating functional units such as charge and active ester for generating the microfluidic flow and conjugating biomolecules, respectively. Furthermore, these polymers were incorporated with silane or hydrophobic moiety to construct stable interfaces on various substrate materials such as glass, quartz, poly(methyl methacrylate), and poly(dimethylsiloxane), via a silane-coupling reaction or hydrophobic interactions. The basic interfacial properties of these interfaces have been characterized from multiple aspects of chemistry, physics, and biology, and the suppression of nonspecific bioadsorption and control of microfluidic flow have been successfully achieved using these biointerfaces on a chip. Further, many chip-based biomedical applications such as immunoassays and DNA separation have been accomplished by integrating these biointerfaces on a chip. Therefore, functional phospholipid polymer interfaces are promising and useful for application to lab-on-a-chip devices in biomedicine.
Stability of Inhomogeneous Equilibria of Hamiltonian Continuous Media Field Theories
NASA Astrophysics Data System (ADS)
Hagstrom, George
2013-10-01
There are a wide variety of 1 + 1 Hamiltonian continuous media field theories that exhibit phase space pattern formation. In plasma physics, the most famous of these is the Vlasov-Poisson equation, but other examples include the incompressible Euler equation in two-dimensions and the Hamiltonian Mean Field (or XY) model. One of the characteristic phenomenon that occurs in systems described by these equations is the formation of cat's eye patterns in phase space as a result of the nonlinear saturation of instabilities. Corresponding to each of these cat's eyes is a spatially inhomogeneous equilibrium solution of the underlying model, in plasma physics these are called BGK modes, but analogous solutions exist in all of the above systems. Here we analyze the stability of inhomogeneous equilibria in the Hamiltonian Mean Field model and in the Single Wave model, which is an equation that was derived to provide a model of the formation of electron holes in plasmas. We use action angle variables and the properties of elliptic functions to analyze the resulting dispersion relation construct linearly stable inhomogeneous equilibria for in the limit of small numbers of particles and study the behavior of solutions near these equilibria. Work supported by USDOE grant no. DE-FG02-ER53223.
Sleeping Beauty transposon-based system for rapid generation of HBV-replicating stable cell lines.
Wu, Yong; Zhang, Tian-Ying; Fang, Lin-Lin; Chen, Zi-Xuan; Song, Liu-Wei; Cao, Jia-Li; Yang, Lin; Yuan, Quan; Xia, Ning-Shao
2016-08-01
The stable HBV-replicating cell lines, which carry replication-competent HBV genome stably integrated into the genome of host cell, are widely used to evaluate the effects of antiviral agents. However, current methods to generate HBV-replicating cell lines, which are mostly dependent on random integration of foreign DNA via plasmid transfection, are less-efficient and time-consuming. To address this issue, we constructed an all-in-one Sleeping Beauty transposon system (denoted pTSMP-HBV vector) for robust generation of stable cell lines carrying replication-competent HBV genome of different genotype. This vector contains a Sleeping Beauty transposon containing HBV 1.3-copy genome with an expression cassette of the SV40 promoter driving red fluorescent protein (mCherry) and self-cleaving P2A peptide linked puromycin resistance gene (PuroR). In addition, a PGK promoter-driven SB100X hyperactive transposase cassette is placed in the outside of the transposon in the same plasmid.The HBV-replicating stable cells could be obtained from pTSMP-HBV transfected HepG2 cells by red fluorescence-activated cell sorting and puromycin resistant cell selection within 4-week. Using this system, we successfully constructed four cell lines carrying replication-competent HBV genome of genotypes A-D. The replication and viral protein expression profiles of these cells were systematically characterized. In conclusion, our study provides a high-efficiency strategy to generate HBV-replicating stable cell lines, which may facilitate HBV-related virological study. Copyright © 2016. Published by Elsevier B.V.
The CMS Journey to LHC Physics
Virdee, Tejinder
2018-04-27
An overview of the design, the construction and physics of CMS will be given. A history of construction, encompassing the R&D; and challenges faced over the last decade and a half, will be recalled using selected examples. CMS is currently in the final stages of installation and commissioning is gathering pace. After a short status report of where CMS stands today some of the expected (great) physics to come will be outlined.
Han, Ho; Pettee Gabriel, Kelley; Kohl, Harold Willis
2017-01-01
The Transtheoretical Model (TTM) is a successful framework for guiding behavior change programs for several health behaviors, yet its application to reduce of sedentary behavior has been neglected. In addition, no data exist regarding the association between determinants of sedentary behaviors based on the TTM and physical activity behavior. The purpose of this study was to investigate college students' stages of motivational readiness to avoid sedentary behaviors and relevant psychological determinants using newly developed TTM questionnaires and to identify the association between current physical activity and sedentary behaviors based on TTM constructs. Data were obtained from 225 college students enrolled in health education and physical education courses. Participants completed a package of questionnaires including validated TTM, physical activity and sitting time questionnaires. Participants also wore an accelerometer for seven consecutive days. MANOVAs were conducted to determine mean differences in psychological constructs across the TTM stages, and Chi-square tests and Spearman correlation were used to evaluate the associations between current physical activity and sedentary behavior. A majority of the participants were in the sedentary stages, and men and women differed in proportion of individuals in the stages (78.0% vs. 68.1%, respectively). The gender difference was also found in use of the processes of change. In general, the mean scores of the TTM constructs increased as the stages progressed. No significant associations were found between the TTM constructs for sedentary behavior and current physical activity levels (p>0.05). A high proportion of college students were in sedentary stages regardless of physical activity levels, but different distributions in men and women. Participants in earlier stages were less likely to utilize the TTM constructs to reduce sedentary behaviors than those in later stages. A lack of association between physical activity and the psychological determinants of sedentary behavior was found.
Karstad, K.; Søgaard, K.
2016-01-01
Background There is a lack of quantification of occupational physical activity (OPA) and leisure time physical activity (LTPA) among construction workers. Objectives To describe physical activity energy expenditure (PAEE), physical workload, and the effect of a PA-intervention among construction workers. Methods Sixty-seven Construction workers self-reported their physical activity (PA), had PA assessed directly (PAEE), and observed OPA using the tool “Posture, Activity, Tools and Handling.” The PA-intervention (Intervention; n = 29, Controls; n = 24) included 3x20-min training/week for 12 weeks. Results Baseline median OPA was 5036 MET-min/week and LTPA 2842 MET-min/week, p < 0.01. OPA directly recorded was (mean ± SE): 56.6 ± 3.2 J/kg/min and LTPA was: 35.7 ± 2.2 J/kg/min (p < 0.001). Manual material handling was performed for ≥ 25% of working time by more than 50% of the participants. Post-intervention, the training group reduced overall PAEE compared to the control group but not specifically during work. Conclusions OPA was within the maximum recommended level of 1/3 proposed in consensus guidelines but did not decrease with PA-intervention. PMID:27097799
The Social Physique Anxiety Scale: construct validity in adolescent females.
McAuley, E; Burman, G
1993-09-01
Hart, Leary, and Rejeski have developed the Social Physique Anxiety Scale (SPA), a measure of the anxiety experienced in response to having one's physique evaluated by other people. The present study cross-validated the psychometric properties of this measure in a sample (N = 236) of adolescent competitive female gymnasts. Employing structural equation modeling, the proposed unidimensional factor structure of the SPA was supported, although some questions regarding the robustness of the fit are raised. Construct validity was demonstrated by significant inverse relationships between aspects of physical efficacy (perceived physical ability and physical self-presentation confidence) and degree of social physique anxiety. These findings are discussed in terms of possible alternative factor structures and integration of social anxiety and other psychosocial constructs to better understand physical activity behavior.
Metal-oxide-metal point contact junction detectors. [detection mechanism and mechanical stability
NASA Technical Reports Server (NTRS)
Baird, J.; Havemann, R. H.; Fults, R. D.
1973-01-01
The detection mechanism(s) and design of a mechanically stable metal-oxide-metal point contact junction detector are considered. A prototype for a mechanically stable device has been constructed and tested. A technique has been developed which accurately predicts microwave video detector and heterodyne mixer SIM (semiconductor-insulator-metal) diode performance from low dc frequency volt-ampere curves. The difference in contact potential between the two metals and geometrically induced rectification constitute the detection mechanisms.
Discontinuity of the annuity curves. III. Two types of vital variability in Drosophila melanogaster.
Bychkovskaia, I B; Mylnikov, S V; Mozhaev, G A
2016-01-01
We confirm five-phased construction of Drosophila annuity curves established earlier. Annuity curves were composed of stable five-phase component and variable one. Variable component was due to differences in phase durations. As stable, so variable components were apparent for 60 generations. Stochastic component was described as well. Viability variance which characterize «reaction norm» was apparent for all generation as well. Thus, both types of variability seem to be inherited.
Self-Healing Textile: Enzyme Encapsulated Layer-by-Layer Structural Proteins.
Gaddes, David; Jung, Huihun; Pena-Francesch, Abdon; Dion, Genevieve; Tadigadapa, Srinivas; Dressick, Walter J; Demirel, Melik C
2016-08-10
Self-healing materials, which enable an autonomous repair response to damage, are highly desirable for the long-term reliability of woven or nonwoven textiles. Polyelectrolyte layer-by-layer (LbL) films are of considerable interest as self-healing coatings due to the mobility of the components comprising the film. In this work mechanically stable self-healing films were fabricated through construction of a polyelectrolyte LbL film containing squid ring teeth (SRT) proteins. SRTs are structural proteins with unique self-healing properties and high elastic modulus in both dry and wet conditions (>2 GPa) due to their semicrystalline architecture. We demonstrate LbL construction of multilayers containing native and recombinant SRT proteins capable of self-healing defects. Additionally, we show these films are capable of utilizing functional biomolecules by incorporating an enzyme into the SRT multilayer. Urease was chosen as a model enzyme of interest to test its activity via fluorescence assay. Successful construction of the SRT films demonstrates the use of mechanically stable self-healing coatings, which can incorporate biomolecules for more complex protective functionalities for advanced functional fabrics.
An algebraic method for constructing stable and consistent autoregressive filters
DOE Office of Scientific and Technical Information (OSTI.GOV)
Harlim, John, E-mail: jharlim@psu.edu; Department of Meteorology, the Pennsylvania State University, University Park, PA 16802; Hong, Hoon, E-mail: hong@ncsu.edu
2015-02-15
In this paper, we introduce an algebraic method to construct stable and consistent univariate autoregressive (AR) models of low order for filtering and predicting nonlinear turbulent signals with memory depth. By stable, we refer to the classical stability condition for the AR model. By consistent, we refer to the classical consistency constraints of Adams–Bashforth methods of order-two. One attractive feature of this algebraic method is that the model parameters can be obtained without directly knowing any training data set as opposed to many standard, regression-based parameterization methods. It takes only long-time average statistics as inputs. The proposed method provides amore » discretization time step interval which guarantees the existence of stable and consistent AR model and simultaneously produces the parameters for the AR models. In our numerical examples with two chaotic time series with different characteristics of decaying time scales, we find that the proposed AR models produce significantly more accurate short-term predictive skill and comparable filtering skill relative to the linear regression-based AR models. These encouraging results are robust across wide ranges of discretization times, observation times, and observation noise variances. Finally, we also find that the proposed model produces an improved short-time prediction relative to the linear regression-based AR-models in forecasting a data set that characterizes the variability of the Madden–Julian Oscillation, a dominant tropical atmospheric wave pattern.« less
Definitions, Foundations and Associations of Physical Literacy: A Systematic Review.
Edwards, Lowri C; Bryant, Anna S; Keegan, Richard J; Morgan, Kevin; Jones, Anwen M
2017-01-01
The concept of physical literacy has stimulated increased research attention in recent years-being deployed in physical education, sport participation, and the promotion of physical activity. Independent research groups currently operationalize the construct differently. The purpose of this systematic review was to conduct a systematic review of the physical literacy construct, as reflected in contemporary research literature. Five databases were searched using the preferred reporting items for systematic reviews and meta-analyses (PRISMA) guidelines for systematic reviews. Inclusion criteria were English language, peer reviewed, published by March 2016, and seeking to conceptualize physical literacy. Articles that met these criteria were analyzed in relation to three core areas: properties/attributes, philosophical foundations and theoretical associations with other constructs. A total of 50 published articles met the inclusion criteria and were analyzed qualitatively using inductive thematic analysis. The thematic analysis addressed the three core areas. Under definitions, core attributes that define physical literacy were identified, as well as areas of conflict between different approaches currently being adopted. One relatively clear philosophical approach was prominent in approximately half of the papers, based on a monist/holistic ontology and phenomenological epistemology. Finally, the analysis identified a number of theoretical associations, including health, physical activity and academic performance. Current literature contains different representations of the physical literacy construct. The costs and benefits of adopting an exclusive approach versus pluralism are considered. Recommendations for both researchers and practitioners focus on identifying and clearly articulating the definitions, philosophical assumptions and expected outcomes prior to evaluating the effectiveness of this emerging concept.
NASA Astrophysics Data System (ADS)
Xiao, Lili; Chai, Bo; Yin, Kunlong
2015-09-01
A passenger elevator is to be built on a nearly vertical slope in the National Geological Park in Enshi, Hubei province, China. Three steps comprise the construction: excavating the slope toe for the elevator platform, building the elevator on the platform, and affixing the elevator to the slope using anchors. To evaluate the rock slope stability in the elevator area and the safety of the elevator construction, we applied three techniques: qualitative analysis, formula calculation, and numerical simulation methods, based on field investigation and parameter selection, and considering both wet and dry conditions, pre- and post-construction. Qualitative stability factors for sliding and falling were calculated using the limit equilibrium method; the results show that the slope as a whole is stable, with a few unstable blocks, notably block BT1. Formula-based stability factors were calculated for four sections on block BT1, revealing the following: anchors will decrease the stability of certain rock pieces; the lowest average stability factor after anchoring will be K f = 1.36 in wet conditions; block BT1 should be reinforced during elevator construction, up to a first-class slope stability factor of K f = 1.40; and the slope as a whole is stable. Numerical simulation using FLAC3D indicated that the stress distribution will reach equilibrium for all steps before and after construction, and that the factor of safety (FOS) is within the general slope safety range (FOS > 1.05). We suggest that unstable pieces in block BT1 be reinforced during construction to a first-class slope safety range (FOS > 1.3), and that deformation monitoring on the slope surface be implemented.
Huang, Jiang-Bo; Bai, Xing-Feng; Li, Li; Zheng, Zhan-Jiang; Xu, Zheng; Cui, Yu-Ming; Cao, Jian; Xu, Li-Wen
2017-03-23
Direct functionalization of terpyridines is an increasingly important topic in the field of dyes and catalysis as well as supramolecular chemistry, but its synthesis and transformation is usually challenging. Herein, a HOMO-raising strategy is reported for the construction of a super-stable novel terpyridine chromophores, in which the selective oxidation of terpyridines at its 3-position was determined successfully to the synthesis of phenol-functionalization of terpyridines (TPyOHs) bearing a hydrogen bonding group. The corresponding TPyOHs displayed strong aggregation-induced emission and exhibited highly selective and visual detection of Zn II cation with a record green terpyridine-based luminophore with nanomolar sensitivity (125 nm). © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
Lunar concrete for construction
NASA Technical Reports Server (NTRS)
Cullingford, Hatice S.; Keller, M. Dean
1988-01-01
Feasibility of using concrete for lunar-base construction has been discussed recently without relevant data for the effects of vacuum on concrete. Experimental studies performed earlier at Los Alamos have shown that concrete is stable in vacuum with no deterioration of its quality as measured by the compressive strength. Various considerations of using concrete successfully on the moon are provided in this paper along with specific conclusions from the existing data base.
Perrier, Marie-Josée; Shirazipour, Celina H; Latimer-Cheung, Amy E
2015-04-01
Despite numerous physical, social, and mental health benefits of engaging in moderate and vigorous intensity physical activities (e.g., sport), few individuals with acquired physical disabilities currently participate in adapted sport. Theory-based sport promotion interventions are one possible way to increase the amount of individuals who engage in sport. The primary objective of this study was to examine the profiles of three different sport participation groups with respect to demographic, injury, and Health Action Process Approach (HAPA) constructs. ANOVAs and Chi-square tests were used to determine group differences on demographic and disability-related constructs. A MANCOVA was conducted to determine differences between three sport participation groups (non-intenders, intenders, and actors) with age, years post-injury, mode of mobility, and sex included as covariates. A cohort of 201 individuals was recruited; 56 (27.9%) were non-intenders, 21 (10.4%) were intenders, and 124 (61.7%) were actors. The MANCOVA revealed significant differences between groups on the HAPA constructs, F(22,370) = 9.02, p < .0001, Pillai's trace = .70, demonstrating that individuals with acquired physical disabilities will rate important health behavior constructs differently based on their sport intentions. These results provide an important framework that adapted sport organizations can use to tailor their sport promotion programs. Copyright © 2015 Elsevier Inc. All rights reserved.
Cooper, Rachel; Richards, Marcus; Kuh, Diana
2017-09-01
The aim of the study was to test the hypothesis that higher childhood cognitive ability is associated with reduced risk of decline in physical capability in late midlife. Participants were 1954 men and women from the Medical Research Council National Survey of Health and Development with complete data on cognitive ability at age of 15 years and measures of grip strength and chair rise speed at ages of 53 and 60 to 64 years. Using multinomial logistic regression, associations of childhood cognitive ability with categories of change in grip strength and chair rise speed (i.e., decline, stable high, stable low, reference) were investigated. Adjustments were made for potential confounders from early life and adult mediators including health behaviors, educational level, and cognitive ability at age of 53 years. Higher childhood cognitive scores were associated with reduced risks of decline in grip strength and chair rise speed, for example, the sex-adjusted relative-risk ratio of decline (versus reference) in grip strength per 1SD increase in childhood cognitive score was 0.82 (95% confidence interval = 0.73-0.92). Higher childhood cognitive scores were also associated with reduced risk of stable low and increased likelihood of stable high chair rise speed. These findings suggest that childhood cognitive ability may be related to decline in physical capability in late midlife. A number of life course pathways are implicated, including those linking childhood and adult cognitive ability. Future research aiming to identify new opportunities to prevent or minimize age-related declines in physical capability may benefit from considering the potential role of neurodevelopmental as well as neurodegenerative pathways.
Kawedia, Jitesh D; Zhang, Yan-Ping; Myers, Alan L; Richards-Kortum, Rebecca R; Kramer, Mark A; Gillenwater, Ann M; Culotta, Kirk S
2016-02-01
Proflavine hemisulfate solution is a fluorescence contrast agent to visualize cell nuclei using high-resolution optical imaging devices such as the high-resolution microendoscope. These devices provide real-time imaging to distinguish between normal versus neoplastic tissue. These images could be helpful for early screening of oral cancer and its precursors and to determine accurate margins of malignant tissue for ablative surgery. Extemporaneous preparation of proflavine solution for these diagnostic procedures requires preparation in batches and long-term storage to improve compounding efficiency in the pharmacy. However, there is a paucity of long-term stability data for proflavine contrast solutions. The physical and chemical stability of 0.01% (10 mg/100 ml) proflavine hemisulfate solutions prepared in sterile water was determined following storage at refrigeration (4-8℃) and room temperature (23℃). Concentrations of proflavine were measured at predetermined time points up to 12 months using a validated stability-indicating high-performance liquid chromatography method. Proflavine solutions stored under refrigeration were physically and chemically stable for at least 12 months with concentrations ranging from 95% to 105% compared to initial concentration. However, in solutions stored at room temperature increased turbidity and particulates were observed in some of the tested vials at 9 months and 12 months with peak particle count reaching 17-fold increase compared to baseline. Solutions stored at room temperature were chemically stable up to six months (94-105%). Proflavine solutions at concentration of 0.01% were chemically and physically stable for at least 12 months under refrigeration. The solution was chemically stable for six months when stored at room temperature. We recommend long-term storage of proflavine solutions under refrigeration prior to diagnostic procedure. © The Author(s) 2014.
Hunt, R.J.; Bullen, T.D.; Krabbenhoft, D.P.; Kendall, C.
1998-01-01
Wetlands cannot exist without water, but wetland hydrology is difficult to characterize. As a result, compensatory wetland mitigation often only assumes the proper hydrology has been created. In this study, water sources and mass transfer processes in a natural and constructed wetland complex were investigated using isotopes of water and strontium. Water isotope profiles in the saturated zone revealed that the natural wetland and one site in the constructed wetland were primarily fed by ground water; profiles in another constructed wetland site showed recent rain was the predominant source of water in the root zone. Water isotopes in the capillary fringe indicated that the residence time for rain is less in the natural wetland than in the constructed wetland, thus transpiration (an important water sink) was greater in the natural wetland. Strontium isotopes showed a systematic difference between the natural and constructed wetlands that we attribute to the presence or absence of peat. In the peat-rich natural wetland, ??87Sr in the pore water increased along the flowline due to preferential weathering of minerals containing radiogenic Sr in response to elevated Fe concentrations in the water. In the constructed wetland, where peat thickness was thin and Fe concentrations in water were negligible, ??87Sr did not increase along the flowline. The source of the peat (on-site or off-site derived) applied in the constructed wetland controlled the ??87Sr at the top of the profile, but the effects were restricted by strong cation exchange in the underlying fluvial sediments. Based on the results of this study, neither constructed wetland site duplicated the water source and weathering environment of the adjoining natural wetland. Moreover, stable isotopes were shown to be effective tools for investigating wetlands and gaining insight not easily obtained using non-isotopic techniques. These tools have potential widespread application to wetlands that have distinct isotopic endmember sources.
Garcia, Jeanette M; Huang, Terry T; Trowbridge, Matthew; Weltman, Arthur; Sirard, John R
2016-12-01
We compared the effects of traditional (stable) and non-traditional (dynamic) school furniture on children's physical activity (PA), energy expenditure (EE), information retention, and math skills. Participants were 12 students (8.3 years, 58 % boys) in grades 1-5. Participants wore an Actigraph GT3X+ accelerometer (to assess PA), and an Oxycon Mobile indirect calorimetry device (to assess EE) for 40 min (20 min for each session). Each session consisted of a nutrition lecture, multiple choice questions related to the lecture, and grade-appropriate math problems. We used paired t tests to examine differences between the stable and dynamic furniture conditions. Average activity counts were significantly greater in the dynamic than the stable furniture condition (40.82 vs. 9.81, p < 0.05). We found no significant differences between conditions for average oxygen uptake (p = 0.34), percentage of nutrition questions (p = 0.5), or math problems (p = 0.93) answered correctly. Movement was significantly greater in the dynamic than the stable furniture condition, and did not impede information acquisition or concentration. Future studies should compare the long-term effects of traditional and dynamic furniture on health and academic outcomes in schools and other settings.
Development of Stable Liquid Glucagon Formulations for Use in Artificial Pancreas
Li, Ming; Krasner, Alan; De Souza, Errol
2014-01-01
Background: A promising approach to treat diabetes is the development of fully automated artificial/bionic pancreas systems that use both insulin and glucagon to maintain euglycemia. A physically and chemically stable liquid formulation of glucagon does not currently exist. Our goal is to develop a glucagon formulation that is stable as a clear and gel-free solution, free of fibrils and that has the requisite long-term shelf life for storage in the supply chain, short-term stability for at least 7 days at 37°C, and pump compatibility for use in a bihormonal pump. Methods: We report the development of two distinct families of stable liquid glucagon formulations which utilize surfactant or surfactant-like excipients (LMPC and DDM) to “immobilize” the glucagon in solution potentially through the formation of micelles and prevention of interaction between glucagon molecules. Results: Data are presented that demonstrate long-term physical and chemical stability (~2 years) at 5°C, short-term stability (up to 1 month) under accelerated 37°C testing conditions, pump compatibility for up to 9 days, and adequate glucose responses in dogs and diabetic swine. Conclusions: These stable glucagon formulations show utility and promise for further development in artificial pancreas systems. PMID:25352634
Simulating Shock Triggered Star Formation with AstroBEAR2.0
NASA Astrophysics Data System (ADS)
Li, Shule; Frank, Adam; Blackman, Eric
2013-07-01
Star formation can be triggered by the compression from shocks running over stable clouds. Triggered star formation is a favored explanation for the traces of SLRI's in our solar system. Previous research has shown that when parameters such as shock speed are within a certain range, the gravitational collapse of otherwise stable, dense cloud cores is possible. However, these studies usually focus on the precursors of star formation, and the conditions for the triggering. We use AstroBEAR2.0 code to simulate the collapse and subsequent evolution of a stable Bonnor-Ebert cloud by an incoming shock. Through our simulations, we show that interesting physics happens when the newly formed star interacts with the cloud residue and the post-shock flow. We identify these interactions as controlled by the initial conditions of the triggering and study the flow pattern as well as the evolution of important physics quantities such as accretion rate and angular momentum.
Liao, Yuliang; Wang, Linjing; Xu, Xiangdong; Chen, Haibin; Chen, Jiawei; Zhang, Guoqian; Lei, Huaiyu; Wang, Ruihao; Zhang, Shuxu; Gu, Xuejun; Zhen, Xin; Zhou, Linghong
2017-06-01
To design and construct a three-dimensional (3D) anthropomorphic abdominal phantom for geometric accuracy and dose summation accuracy evaluations of deformable image registration (DIR) algorithms for adaptive radiation therapy (ART). Organ molds, including liver, kidney, spleen, stomach, vertebra, and two metastasis tumors, were 3D printed using contours from an ovarian cancer patient. The organ molds were molded with deformable gels made of different mixtures of polyvinyl chloride (PVC) and the softener dioctyl terephthalate. Gels with different densities were obtained by a polynomial fitting curve that described the relation between the Hounsfield unit (HU) and PVC-softener blending ratio. The rigid vertebras were constructed by molding of white cement and cellulose pulp. The final abdominal phantom was assembled by arranging all the fabricated organs inside a hollow dummy according to their anatomies, and sealed by deformable gel with averaged HU of muscle and fat. Fiducial landmarks were embedded inside the phantom for spatial accuracy and dose accumulation accuracy studies. Two channels were excavated to facilitate ionization chamber insertion for dosimetric measurements. Phantom properties such as deformable gel elasticity and HU stability were studied. The dosimetric measurement accuracy in the phantom was performed, and the DIR accuracies of three DIR algorithms available in the open source DIR toolkit-DIRART were also validated. The constructed deformable gel showed elastic behavior and was stable in HU values over times, proving to be a practical material for the deformable phantom. The constructed abdominal phantom consisted of realistic anatomies in terms of both anatomical shapes and densities when compared with its reference patient. The dosimetric measurements showed a good agreement with the calculated doses from the treatment planning system. Fiducial-based accuracy analysis conducted on the constructed phantom demonstrated the feasibility of applying the phantom for organ-wise DIR accuracy assessment. We have designed and constructed an anthropomorphic abdominal deformable phantom with satisfactory elastic property, realistic organ density, and anatomy. This physical phantom can be used for routine validations of DIR geometric accuracy and dose accumulation accuracy in ART. © 2017 American Association of Physicists in Medicine.
Individual differences and their measurement: A review of 100 years of research.
Sackett, Paul R; Lievens, Filip; Van Iddekinge, Chad H; Kuncel, Nathan R
2017-03-01
This article reviews 100 years of research on individual differences and their measurement, with a focus on research published in the Journal of Applied Psychology. We focus on 3 major individual differences domains: (a) knowledge, skill, and ability, including both the cognitive and physical domains; (b) personality, including integrity, emotional intelligence, stable motivational attributes (e.g., achievement motivation, core self-evaluations), and creativity; and (c) vocational interests. For each domain, we describe the evolution of the domain across the years and highlight major theoretical, empirical, and methodological developments, including relationships between individual differences and variables such as job performance, job satisfaction, and career development. We conclude by discussing future directions for individual differences research. Trends in the literature include a growing focus on substantive issues rather than on the measurement of individual differences, a differentiation between constructs and measurement methods, and the use of innovative ways of assessing individual differences, such as simulations, other-reports, and implicit measures. (PsycINFO Database Record (c) 2017 APA, all rights reserved).
Engineering Protein Hydrogels Using SpyCatcher-SpyTag Chemistry.
Gao, Xiaoye; Fang, Jie; Xue, Bin; Fu, Linglan; Li, Hongbin
2016-09-12
Constructing hydrogels from engineered proteins has attracted significant attention within the material sciences, owing to their myriad potential applications in biomedical engineering. Developing efficient methods to cross-link tailored protein building blocks into hydrogels with desirable mechanical, physical, and functional properties is of paramount importance. By making use of the recently developed SpyCatcher-SpyTag chemistry, we successfully engineered protein hydrogels on the basis of engineered tandem modular elastomeric proteins. Our resultant protein hydrogels are soft but stable, and show excellent biocompatibility. As the first step, we tested the use of these hydrogels as a drug carrier, as well as in encapsulating human lung fibroblast cells. Our results demonstrate the robustness of the SpyCatcher-SpyTag chemistry, even when the SpyTag (or SpyCatcher) is flanked by folded globular domains. These results demonstrate that SpyCatcher-SpyTag chemistry can be used to engineer protein hydrogels from tandem modular elastomeric proteins that can find applications in tissue engineering, in fundamental mechano-biological studies, and as a controlled drug release vehicle.
McCoy, Kimberly; Uchida, Masaki; Lee, Byeongdu; Douglas, Trevor
2018-04-24
Bottom-up construction of mesoscale materials using biologically derived nanoscale building blocks enables engineering of desired physical properties using green production methods. Virus-like particles (VLPs) are exceptional building blocks due to their monodispersed sizes, geometric shapes, production ease, proteinaceous composition, and our ability to independently functionalize the interior and exterior interfaces. Here a VLP, derived from bacteriophage P22, is used as a building block for the fabrication of a protein macromolecular framework (PMF), a tightly linked 3D network of functional protein cages that exhibit long-range order and catalytic activity. Assembly of PMFs was electrostatically templated, using amine-terminated dendrimers, then locked into place with a ditopic cementing protein that binds to P22. Long-range order is preserved on removal of the dendrimer, leaving a framework material composed completely of protein. Encapsulation of β-glucosidase enzymes inside of P22 VLPs results in formation of stable, condensed-phase materials with high local concentration of enzymes generating catalytically active PMFs.
The cultural grounding of personal relationship: the importance of attractiveness in everyday life.
Anderson, Stephanie L; Adams, Glenn; Plaut, Victoria C
2008-08-01
Previous research has suggested that physically attractive people experience more positive life outcomes than do unattractive people. However, the importance of physical attractiveness in everyday life may vary depending on the extent to which different cultural worlds afford or require individual choice in the construction and maintenance of personal relationships. The authors hypothesized that attractiveness matters more for life outcomes in settings that promote voluntaristic-independent constructions of relationship as the product of personal choice than it does in settings that promote embedded-interdependent constructions of relationship as an environmental affordance. Study 1 examined self-reported outcomes of attractive and unattractive persons. Study 2 examined expectations about attractive and unattractive targets. Results provide support for the hypothesis along four dimensions: national context, relationship context, rural-urban context, and experimental manipulation of relationship constructions. These patterns suggest that the importance of physical attractiveness documented by psychological research is the product of particular constructions of reality. (c) 2008 APA, all rights reserved
Constructing constitutive relationships for seismic and aseismic fault slip
Beeler, N.M.
2009-01-01
For the purpose of modeling natural fault slip, a useful result from an experimental fault mechanics study would be a physically-based constitutive relation that well characterizes all the relevant observations. This report describes an approach for constructing such equations. Where possible the construction intends to identify or, at least, attribute physical processes and contact scale physics to the observations such that the resulting relations can be extrapolated in conditions and scale between the laboratory and the Earth. The approach is developed as an alternative but is based on Ruina (1983) and is illustrated initially by constructing a couple of relations from that study. In addition, two example constitutive relationships are constructed; these describe laboratory observations not well-modeled by Ruina's equations: the unexpected shear-induced weakening of silica-rich rocks at high slip speed (Goldsby and Tullis, 2002) and fault strength in the brittle ductile transition zone (Shimamoto, 1986). The examples, provided as illustration, may also be useful for quantitative modeling.
USDA-ARS?s Scientific Manuscript database
Purpose: To examine relationships among psychosocial constructs (PSC) of behavior change and post-intervention changes in physical activity (PA) and dietary outcomes. Design: Non-controlled, pre- post-experimental intervention. Setting: Midsized, southern United States city. Subjects: 269 prima...
The Panopticon of Physical Education: Pretty, Active and Ideally White
ERIC Educational Resources Information Center
Azzarito, Laura
2009-01-01
Background: Recently, a growing number of researchers have explored students' social construction of the body in school settings. Young peoples' construction of the body, inextricably linked to dominant cultural discourses of the mass media, bears upon their identity and physical activity participation choices. Purpose: This study employed a…
ERIC Educational Resources Information Center
Banke, Ron; Di Gennaro, Guy; Ediger, Rick; Garner, Lanny; Hersom, Steve; Miller, Jack; Nemeth, Ron; Petrucelli, Jim; Sierks, Donna; Smith, Don; Swank, Kevin; West, Kevin
This book establishes guidelines for the construction and maintenance of tracks by providing information for building new tracks or upgrading existing tracks. Subjects covered include running track planning and construction, physical layout, available surfaces, and maintenance. General track requirements and construction specifications are…
Westergren, Thomas; Berntsen, Sveinung; Ludvigsen, Mette Spliid; Aagaard, Hanne; Hall, Elisabeth O C; Ommundsen, Yngvar; Uhrenfeldt, Lisbeth; Fegran, Liv
2017-08-01
Asthma is a heterogeneous chronic airway disease which may reduce capability for physical activity. In healthy peers, physical activity is influenced by psychosocial and socioeconomic factors. Knowledge about the role of these factors has not been mapped in children and adolescents with asthma. The main objective of this scoping review was to identify psychosocial and socioeconomic factors associated with physical activity level in children and adolescents with asthma in the literature. The specific objectives were to map the instruments used to measure these factors, report on the construction and validation of these instruments, map psychosocial and socioeconomic issues related to physical activity level reported in qualitative studies, and identify gaps in knowledge about the relationship between psychosocial and socioeconomic factors and physical activity level in children and adolescents with asthma. Children and adolescents with asthma aged six to 18 years. Psychosocial and socioeconomic factors related to physical activity level and participation. All physical activity contexts. Quantitative and qualitative primary studies in English, with no date limit. The databases searched included nine major databases for health and sports science, and five databases for unpublished studies. After screening and identification of studies, the reference lists of all identified reports were searched, and forward citation searches were conducted using four databases. The following data were extracted: (a) relevant study characteristics and assessment of physical activity level, (b) instruments used to assess psychosocial and socioeconomic factors, (c) association between physical activity level and these factors, (d) construction and validation of instruments, and (e) psychosocial and socioeconomic issues related to physical activity participation. Twenty-one quantitative and 13 qualitative studies were included. In cross-sectional studies, enjoyment, physical self-concept, self-efficacy, attitudes and beliefs about physical activity and health, psychological distress, health-related quality of life, and social support were more often reported as being correlated with physical activity level. In three studies, the construct validity was assessed by factor analysis and construct reliability tests for the study population. Qualitative studies reported 10 issues related to physical activity participation, and capability and being like peers were most commonly reported. There was no direct evidence that qualitative research informed the development or adjustment of instruments in quantitative studies. Seven psychosocial factors correlated with physical activity level; capability and being like peers were the most commonly reported issues. Reports of the construction and validation of instruments were sparse.
Wang, Jianjun; Zhu, Junge; Min, Cong; Wu, Sheng
2014-05-13
γ-lactamase is used for the resolution of γ-lactam which is utilized in the synthesizing of abacavir and peramivir. In some cases, enzymatic method is the most utilized method because of its high efficiency and productivity. The cellulose binding domain (CBD) of cellulose is often used as the bio-specific affinity matrix for enzyme immobilization. Cellulose is cheap and it has excellent chemical and physical properties. Meanwhile, binding between cellulose and CBD is tight and the desorption rarely happened. We prepared two fusion constructs of the γ-lactamase gene gla, which was from Sulfolobus solfataricus P2. These two constructs had Cbd (cellulose binding domain from Clostridium thermocellum) fused at amino or carboxyl terminus of the γ-lactamase. These two constructs were heterogeneously expressed in E. coli rosetta (DE3) as two fusion proteins. Both of them were immobilized well on Avicel (microcrystalline cellulose matrix). The apparent kinetic parameters revealed that carboxyl terminus fused protein (Gla-linker-Cbd) was a better catalyst. The V(max) and k(cat) value of Avicel immobilized Gla-linker-Cbd were 381 U mg⁻¹ and 4.7 × 10⁵ s⁻¹ respectively. And the values of the free Gla-linker-Cbd were 151 U mg⁻¹ and 1.8 × 10⁵ s⁻¹ respectively. These data indicated that the catalytic efficiency of the enzyme was upgraded after immobilization. The immobilized Gla-linker-Cbd had a 10-degree temperature optimum dropping from 80°C to 70°C but it was stable when incubated at 60°C for 48 h. It remained stable in catalyzing 20-batch reactions. After optimization, the immobilized enzyme concentration in transformation was set as 200 mg/mL. We found out that there was inhibition that occurred to the immobilized enzyme when substrate concentration exceeded 60 mM. Finally a 10 mL-volume transformation was conducted, in which 0.6 M substrate was hydrolyzed and the resolution was completed within 9 h with a 99.5% ee value. Cellulose is the most abundant and renewable material on the Earth. The absorption between Cbd domain and cellulose is a bio-green process. The cellulose immobilized fusion Gla exhibited good catalytic characters, therefore we think the cellulose immobilized Gla is a promising catalyst for the industrial preparation of (-) - γ-lactam.
Energy stable and high-order-accurate finite difference methods on staggered grids
NASA Astrophysics Data System (ADS)
O'Reilly, Ossian; Lundquist, Tomas; Dunham, Eric M.; Nordström, Jan
2017-10-01
For wave propagation over distances of many wavelengths, high-order finite difference methods on staggered grids are widely used due to their excellent dispersion properties. However, the enforcement of boundary conditions in a stable manner and treatment of interface problems with discontinuous coefficients usually pose many challenges. In this work, we construct a provably stable and high-order-accurate finite difference method on staggered grids that can be applied to a broad class of boundary and interface problems. The staggered grid difference operators are in summation-by-parts form and when combined with a weak enforcement of the boundary conditions, lead to an energy stable method on multiblock grids. The general applicability of the method is demonstrated by simulating an explosive acoustic source, generating waves reflecting against a free surface and material discontinuity.
Francis, Becky; Archer, Louise; Moote, Julie; DeWitt, Jen; MacLeod, Emily; Yeomans, Lucy
2017-01-01
The present article investigates explanations for gendered trends in Physics and Engineering access, reporting findings from a large-scale study funded by the UK Economic and Social Research Council and drawing primarily on data from interviews with 132 15-16 year-old adolescents and their parents. Survey results in our study and elsewhere show strong gender disparities in anticipated pursuit of Physics after completion of compulsory education. In order to explore the constructions of gender and Physics underlying these trends, we focus on qualitative interview data, applying Foucaultian analysis of discourse to investigate gendered narratives underpinning adolescents' and their parents' articulations. This analysis reveals three key discourses at work on the topic of women's access to Physics: (a) equality of opportunity, (b) continued gender discrimination in and around Physics, and (c) Physics as quintessentially masculine. We additionally identify five distinct narratives supporting the discourse of physics as masculine. These various discourses and narratives are interrogated, and their implications explored. We conclude that it is only by disrupting prevalent constructions of the Physical sciences as a masculine and "hard" domain will we increase the presence of women in the sector. Working with young people to analyse and deconstruct the discursive assumptions made in relation to gender and Physics, as well as further work to increase accessibility and broaden representation in Physics, may be fruitful ways to challenge these longstanding associations between Physics and masculinity.
James W. Cronin: Raising the Profile of Physics Worldwide
NASA Astrophysics Data System (ADS)
Kampert, Karl-Heinz
James W. Cronin started his career in high energy physics, won the Nobel Prize in Physics in 1980 for the discovery of CP-violation, and amongst others, discovered hard parton scattering phenomena in nuclear collisions, an observation known as the "Cronin-effect". In 1986 he decided to move to cosmic ray physics which lead to the construction of the first 1 km2 class large air-shower array CASA-MIA. In 1991, as his masterpiece, he started building a collaboration to construct an instrument of unprecedented size for studying cosmic rays with energies up to 1020 eV. Construction of the Pierre Auger Observatory began in 2002, was finished in 2008, is taking data since like a "Swiss Clock", as Jim used to call it, and has dramatically advanced our understanding of ultra-high energy cosmic rays.
Mantell, Matthew; Cyriac, Mathew; Haines, Colin M; Gudipally, Manasa; O'Brien, Joseph R
2016-01-01
Insufficient biomechanical data exist from comparisons of the stability of expandable lateral cages with that of static transforaminal lumbar interbody fusion (TLIF) cages. The purpose of this biomechanical study was to compare the relative rigidity of L4-5 expandable lateral interbody constructs with or without additive pedicle screw fixation with that of L4-5 static TLIF cages in a novel cadaveric spondylolisthesis model. Eight human cadaver spines were used in this study. A spondylolisthesis model was created at the L4-5 level by creating 2 injuries. First, in each cadaver, a nucleotomy from 2 channels through the anterior side was created. Second, the cartilage of the facet joint was burred down to create a gap of 4 mm. Light-emitting-diode tracking markers were placed at L-3, L-4, L-5, and S-1. Specimens were tested in the following scenarios: intact model, bilateral pedicle screws, expandable lateral 18-mm-wide cage (alone, with unilateral pedicle screws [UPSs], and with bilateral pedicle screws [BPSs]), expandable lateral 22-mm-wide cage (alone, with UPSs, and with BPSs), and TLIF (alone, with UPSs, and with BPSs). Four of the spines were tested with the expandable lateral cages (18-mm cage followed by the 22-mm cage), and 4 of the spines were tested with the TLIF construct. All these constructs were tested in flexion-extension, axial rotation, and lateral bending. The TLIF-alone construct was significantly less stable than the 18- and 22-mm-wide lateral lumbar interbody fusion (LLIF) constructs and the TLIF constructs with either UPSs or BPSs. The LLIF constructs alone were significantly less stable than the TLIF construct with BPSs. However, there was no significant difference between the 18-mm LLIF construct with UPSs and the TLIF construct with BPSs in any of the loading modes. Expandable lateral cages with UPSs provide stability equivalent to that of a TLIF construct with BPSs in a degenerative spondylolisthesis model.
Stable orthogonal local discriminant embedding for linear dimensionality reduction.
Gao, Quanxue; Ma, Jingjie; Zhang, Hailin; Gao, Xinbo; Liu, Yamin
2013-07-01
Manifold learning is widely used in machine learning and pattern recognition. However, manifold learning only considers the similarity of samples belonging to the same class and ignores the within-class variation of data, which will impair the generalization and stableness of the algorithms. For this purpose, we construct an adjacency graph to model the intraclass variation that characterizes the most important properties, such as diversity of patterns, and then incorporate the diversity into the discriminant objective function for linear dimensionality reduction. Finally, we introduce the orthogonal constraint for the basis vectors and propose an orthogonal algorithm called stable orthogonal local discriminate embedding. Experimental results on several standard image databases demonstrate the effectiveness of the proposed dimensionality reduction approach.
Chen, Yong; Yan, Zhenya
2016-03-22
Solitons are of the important significant in many fields of nonlinear science such as nonlinear optics, Bose-Einstein condensates, plamas physics, biology, fluid mechanics, and etc. The stable solitons have been captured not only theoretically and experimentally in both linear and nonlinear Schrödinger (NLS) equations in the presence of non-Hermitian potentials since the concept of the parity-time -symmetry was introduced in 1998. In this paper, we present novel bright solitons of the NLS equation with third-order dispersion in some complex -symmetric potentials (e.g., physically relevant -symmetric Scarff-II-like and harmonic-Gaussian potentials). We find stable nonlinear modes even if the respective linear -symmetric phases are broken. Moreover, we also use the adiabatic changes of the control parameters to excite the initial modes related to exact solitons to reach stable nonlinear modes. The elastic interactions of two solitons are exhibited in the third-order NLS equation with -symmetric potentials. Our results predict the dynamical phenomena of soliton equations in the presence of third-order dispersion and -symmetric potentials arising in nonlinear fiber optics and other physically relevant fields.
Chen, Yong; Yan, Zhenya
2016-01-01
Solitons are of the important significant in many fields of nonlinear science such as nonlinear optics, Bose-Einstein condensates, plamas physics, biology, fluid mechanics, and etc. The stable solitons have been captured not only theoretically and experimentally in both linear and nonlinear Schrödinger (NLS) equations in the presence of non-Hermitian potentials since the concept of the parity-time -symmetry was introduced in 1998. In this paper, we present novel bright solitons of the NLS equation with third-order dispersion in some complex -symmetric potentials (e.g., physically relevant -symmetric Scarff-II-like and harmonic-Gaussian potentials). We find stable nonlinear modes even if the respective linear -symmetric phases are broken. Moreover, we also use the adiabatic changes of the control parameters to excite the initial modes related to exact solitons to reach stable nonlinear modes. The elastic interactions of two solitons are exhibited in the third-order NLS equation with -symmetric potentials. Our results predict the dynamical phenomena of soliton equations in the presence of third-order dispersion and -symmetric potentials arising in nonlinear fiber optics and other physically relevant fields. PMID:27002543
A calculus based on a q-deformed Heisenberg algebra
Cerchiai, B. L.; Hinterding, R.; Madore, J.; ...
1999-04-27
We show how one can construct a differential calculus over an algebra where position variables $x$ and momentum variables p have be defined. As the simplest example we consider the one-dimensional q-deformed Heisenberg algebra. This algebra has a subalgebra generated by cursive Greek chi and its inverse which we call the coordinate algebra. A physical field is considered to be an element of the completion of this algebra. We can construct a derivative which leaves invariant the coordinate algebra and so takes physical fields into physical fields. A generalized Leibniz rule for this algebra can be found. Based on thismore » derivative differential forms and an exterior differential calculus can be constructed.« less
Okura, Hiromichi; Takahashi, Tsuyoshi; Mihara, Hisakazu
2012-06-01
Successful approaches of de novo protein design suggest a great potential to create novel structural folds and to understand natural rules of protein folding. For these purposes, smaller and simpler de novo proteins have been developed. Here, we constructed smaller proteins by removing the terminal sequences from stable de novo vTAJ proteins and compared stabilities between mutant and original proteins. vTAJ proteins were screened from an α3β3 binary-patterned library which was designed with polar/ nonpolar periodicities of α-helix and β-sheet. vTAJ proteins have the additional terminal sequences due to the method of constructing the genetically repeated library sequences. By removing the parts of the sequences, we successfully obtained the stable smaller de novo protein mutants with fewer amino acid alphabets than the originals. However, these mutants showed the differences on ANS binding properties and stabilities against denaturant and pH change. The terminal sequences, which were designed just as flexible linkers not as secondary structure units, sufficiently affected these physicochemical details. This study showed implications for adjusting protein stabilities by designing N- and C-terminal sequences.
[Early attachement relationships and epigenetic customization].
Rocchi, Giordana; Serio, Valentina; Carluccio, Giuseppe Mattia; Marini, Isabella; Meuti, Valentina; Zaccagni, Michela; Giacchetti, Nicoletta; Aceti, Franca
2015-01-01
Recently, new findings in epigenetic science switched the focus from the observation of physiological intragenomic dynamics to the idea of an environmental co-construction of phenotypic expression. In psichodynamic field, objectual relations and attachement theoreticians emphasized the interpersonal dimension of individual development, focusing the attention on the relational matrix of self organization. The construction of stable affective-behavioral traits throughout different parenting styles has actually found a coincidence in ethological studies, which have explored the epigenetic processes underlying the relationship between caregiving and HPA stress responsiveness. An adequate parenting style seems to support affective regulation throughout psychobiological hidden moderators, which would tend to rebalance the physiological systems homeostasis; an unconfident attachment style would promote, on the other hand, the allostatic load rise. Sites of longlife epigenetic susceptibility have also been identified in humans; although associated with risk of maladaptive developing in adverse environmental conditions, they seem to confer protection under favorable conditions. This persisting possibility of reorganization of stable traits throughout lifetime, which seems to be activated by a relevant environmental input, grant to significant relationships, and to therapeutical one as well, an implicit reconditioning potential which could result into the configuration of new stable affective-behavioral styles.
Children's organized physical activity patterns from childhood into adolescence.
Findlay, Leanne C; Garner, Rochelle E; Kohen, Dafna E
2009-11-01
Few longitudinal studies of physical activity have included young children or used nationally representative datasets. The purpose of the current study was to explore patterns of organized physical activity for Canadian children aged 4 through 17 years. Data from 5 cycles of the National Longitudinal Survey of Children and Youth were analyzed separately for boys (n = 4463) and girls (n = 4354) using multiple trajectory modeling. Boys' and girls' organized physical activity was best represented by 3 trajectory groups. For boys, these groups were labeled: high stable, high decreasing, and low decreasing participation. For girls, these groups were labeled: high decreasing, moderate stable, and low decreasing participation. Risk factors (parental education, household income, urban/rural dwelling, and single/dual parent) were explored. For boys and girls, having a parent with postsecondary education and living in a higher income household were associated with a greater likelihood of weekly participation in organized physical activity. Living in an urban area was also significantly associated with a greater likelihood of weekly participation for girls. Results suggest that Canadian children's organized physical activity is best represented by multiple patterns of participation that tend to peak in middle childhood and decline into adolescence.
Covalent intermolecular interaction of the nitric oxide dimer (NO)2
NASA Astrophysics Data System (ADS)
Zhang, Hui; Zheng, Gui-Li; Lv, Gang; Geng, Yi-Zhao; Ji, Qing
2015-09-01
Covalent bonds arise from the overlap of the electronic clouds in the internucleus region, which is a pure quantum effect and cannot be obtained in any classical way. If the intermolecular interaction is of covalent character, the result from direct applications of classical simulation methods to the molecular system would be questionable. Here, we analyze the special intermolecular interaction between two NO molecules based on quantum chemical calculation. This weak intermolecular interaction, which is of covalent character, is responsible for the formation of the NO dimer, (NO)2, in its most stable conformation, a cis conformation. The natural bond orbital (NBO) analysis gives an intuitive illustration of the formation of the dimer bonding and antibonding orbitals concomitant with the breaking of the π bonds with bond order 0.5 of the monomers. The dimer bonding is counteracted by partially filling the antibonding dimer orbital and the repulsion between those fully or nearly fully occupied nonbonding dimer orbitals that make the dimer binding rather weak. The direct molecular mechanics (MM) calculation with the UFF force fields predicts a trans conformation as the most stable state, which contradicts the result of quantum mechanics (QM). The lesson from the investigation of this special system is that for the case where intermolecular interaction is of covalent character, a specific modification of the force fields of the molecular simulation method is necessary. Project supported by the National Natural Science Foundation of China (Grant Nos. 90403007 and 10975044), the Key Subject Construction Project of Hebei Provincial Universities, China, the Research Project of Hebei Education Department, China (Grant Nos. Z2012067 and Z2011133), the National Natural Science Foundation of China (Grant No. 11147103), and the Open Project Program of State Key Laboratory of Theoretical Physics, Institute of Theoretical Physics, Chinese Academy of Sciences, China (Grant No. Y5KF211CJ1).
A Tuned Single Parameter for Representing Conjunction Risk
NASA Technical Reports Server (NTRS)
Plakaloic, D.; Hejduk, M. D.; Frigm, R. C.; Newman, L. K.
2011-01-01
Satellite conjunction assessment risk analysis is a subjective enterprise that can benefit from quantitative aids and, to this end, NASA/GSFC has developed a fuzzy logic construct - called the F-value - to attempt to provide a statement of conjunction risk that amalgamates multiple indices and yields a more stable intra-event assessment. This construct has now sustained an extended tuning procedure against heuristic analyst assessment of event risk. The tuning effort has resulted in modifications to the calculation procedure and the adjustment of tuning coefficients, producing a construct with both more predictive force and a better statement of its error.
Rogers, Laura Q; Courneya, Kerry S; Anton, Phillip M; Hopkins-Price, Patricia; Verhulst, Steven; Robbs, Randall S; Vicari, Sandra K; McAuley, Edward
2017-04-01
Most breast cancer survivors do not meet physical activity recommendations. Understanding mediators of physical activity behavior change can improve interventions designed to increase physical activity in this at-risk population. Study aims were to determine the 3-month Better Exercise Adherence after Treatment for Cancer (BEAT Cancer) behavior change intervention effects on social cognitive theory constructs and the mediating role of any changes on the increase in accelerometer-measured physical activity previously reported. Post-treatment breast cancer survivors (N = 222) were randomized to BEAT Cancer or usual care. Assessments occurred at baseline, 3 months (M3), and 6 months (M6). Adjusted linear mixed model analysis of variance determined intervention effects on walking self-efficacy, outcome expectations, goal setting, and perceived barrier interference at M3. Path analysis determined mediation of intervention effects on physical activity at M6 by changes in social cognitive constructs during the intervention (i.e., baseline to M3). BEAT Cancer significantly improved self-efficacy, goals, negative outcome expectations, and barriers. Total path analysis model explained 24 % of the variance in M6 physical activity. There were significant paths from randomized intervention group to self-efficacy (β = 0.15, p < .05) and barriers (β = -0.22, p < .01). Barriers demonstrated a borderline significant association with M6 physical activity (β = -0.24, p = .05). No statistically significant indirect effects were found. Although BEAT Cancer significantly improved social cognitive constructs, no significant indirect effects on physical activity improvements 3 months post-intervention were observed (NCT00929617).
Physics reach of MoEDAL at LHC: magnetic monopoles, supersymmetry and beyond
NASA Astrophysics Data System (ADS)
Mavromatos, Nick E.; Mitsou, Vasiliki A.
2017-12-01
MoEDAL is a pioneering experiment designed to search for highly ionising messengers of new physics such as magnetic monopoles or massive (pseudo-)stable charged particles, that are predicted to exist in a plethora of models beyond the Standard Model. Its ground-breaking physics program defines a number of scenarios that yield potentially revolutionary insights into such foundational questions as, are there extra dimensions or new symmetries, what is the mechanism for the generation of mass, does magnetic charge exist, what is the nature of dark matter, and, how did the big-bang develop at the earliest times. MoEDAL's purpose is to meet such far-reaching challenges at the frontier of the field. The physics reach of the existing MoEDAL detector is discussed, giving emphasis on searches for magnetic monopoles, supersymmetric (semi)stable partners, doubly charged Higgs bosons, and exotic structures such as black-hole remnants in models with large extra spatial dimensions and D-matter in some brane theories.
[Physical inactivity in Galicia (Spain): trends and the impact of changes in the definition].
Pérez-Ríos, Mónica; Santiago-Pérez, María I; Rodríguez-Camacho, Elena; Malvar, Alberto; Suanzes, Jorge; Hervada, Xurxo
2015-01-01
To estimate the prevalence of physical inactivity during leisure time in Galicia (Spain) between 2007 and 2011 and to assess the impact of including non-leisure time activities in the definition of physical inactivity. A cross-sectional study was conducted in the population aged 16 years and older (n=19,235). Physical activity was assessed by the Minnesota Questionnaire. In 2011, inactivity was estimated by including daily activities. Between 2007 and 2011, the prevalence of inactivity in Galicia remained stable (p=0.249) and close to 50%. This prevalence was higher among women and those who worked or were in education. Inactivity decreased from 47% to 16% when non-leisure time activities were included in the definition. Between 2007 and 2011 in Galicia, the prevalence of inactivity remained high and stable. This prevalence was significantly decreased when non-leisure time activities were included in the definition. Copyright © 2014 SESPAS. Published by Elsevier Espana. All rights reserved.
Prediction of brittleness based on anisotropic rock physics model for kerogen-rich shale
NASA Astrophysics Data System (ADS)
Qian, Ke-Ran; He, Zhi-Liang; Chen, Ye-Quan; Liu, Xi-Wu; Li, Xiang-Yang
2017-12-01
The construction of a shale rock physics model and the selection of an appropriate brittleness index ( BI) are two significant steps that can influence the accuracy of brittleness prediction. On one hand, the existing models of kerogen-rich shale are controversial, so a reasonable rock physics model needs to be built. On the other hand, several types of equations already exist for predicting the BI whose feasibility needs to be carefully considered. This study constructed a kerogen-rich rock physics model by performing the selfconsistent approximation and the differential effective medium theory to model intercoupled clay and kerogen mixtures. The feasibility of our model was confirmed by comparison with classical models, showing better accuracy. Templates were constructed based on our model to link physical properties and the BI. Different equations for the BI had different sensitivities, making them suitable for different types of formations. Equations based on Young's Modulus were sensitive to variations in lithology, while those using Lame's Coefficients were sensitive to porosity and pore fluids. Physical information must be considered to improve brittleness prediction.
ERIC Educational Resources Information Center
Anderson, David; Nashon, Samson
2007-01-01
It is recognized widely that learning is a dynamic and idiosyncratic process of construction and reconstruction of concepts in response to new experiences. It is influenced by the learner's prior knowledge, motivation, and sociocultural context. This study investigated how year 11 and 12 physics students' metacognition influences the development…
Leveraging a Relationship with Biology to Expand a Relationship with Physics
ERIC Educational Resources Information Center
Sawtelle, Vashti; Turpen, Chandra
2016-01-01
This work examines how experiences in one disciplinary domain (biology) can impact the relationship a student builds with another domain (physics). We present a model for disciplinary relationships using the constructs of identity, affect, and epistemology. With these constructs we examine an ethnographic case study of a student who experienced a…
Innes, Carrie R H; Jones, Richard D; Anderson, Tim J; Hollobon, Susan G; Dalrymple-Alford, John C
2009-05-01
Currently, there is no international standard for the assessment of fitness to drive for cognitively or physically impaired persons. A computerized battery of driving-related sensory-motor and cognitive tests (SMCTests) has been developed, comprising tests of visuoperception, visuomotor ability, complex attention, visual search, decision making, impulse control, planning, and divided attention. Construct validity analysis was conducted in 60 normal, healthy subjects and showed that, overall, the novel cognitive tests assessed cognitive functions similar to a set of standard neuropsychological tests. The novel tests were found to have greater perceived face validity for predicting on-road driving ability than was found in the equivalent standard tests. Test-retest stability and reliability of SMCTests measures, as well as correlations between SMCTests and on-road driving, were determined in a subset of 12 subjects. The majority of test measures were stable and reliable across two sessions, and significant correlations were found between on-road driving scores and measures from ballistic movement, footbrake reaction, hand-control reaction, and complex attention. The substantial face validity, construct validity, stability, and reliability of SMCTests, together with the battery's level of correlation with on-road driving in normal subjects, strengthen our confidence in the ability of SMCTests to detect and identify sensory-motor and cognitive deficits related to unsafe driving and increased risk of accidents.
Enzyme-modified nanoporous gold-based electrochemical biosensors.
Qiu, Huajun; Xue, Luyan; Ji, Guanglei; Zhou, Guiping; Huang, Xirong; Qu, Yinbo; Gao, Peiji
2009-06-15
On the basis of the unique physical and chemical properties of nanoporous gold (NPG), which was obtained simply by dealloying Ag from Au/Ag alloy, an attempt was made in the present study to develop NPG-based electrochemical biosensors. The NPG-modified glassy carbon electrode (NPG/GCE) exhibited high-electrocatalytic activity toward the oxidation of nicotinamide adenine dinucleotide (NADH) and hydrogen peroxide (H(2)O(2)), which resulted in a remarkable decrease in the overpotential of NADH and H(2)O(2) electro-oxidation when compared with the gold sheet electrode. The high density of edge-plane-like defective sites and large specific surface area of NPG should be responsible for the electrocatalytic behavior. Such electrocatalytic behavior of the NPG/GCE permitted effective low-potential amperometric biosensing of ethanol or glucose via the incorporation of alcohol dehydrogenase (ADH) or glucose oxidase (GOD) within the three-dimensional matrix of NPG. The ADH- and GOD-modified NPG-based biosensors showed good analytical performance for biosensing ethanol and glucose due to the clean, reproducible and uniformly distributed microstructure of NPG. The stabilization effect of NPG on the incorporated enzymes also made the constructed biosensors very stable. After 1 month storage at 4 degrees C, the ADH- and GOD-based biosensors lost only 5.0% and 4.2% of the original current response. All these indicated that NPG was a promising electrode material for biosensors construction.
Bhatia, Amit; Singh, Bhupinder; Raza, Kaisar; Wadhwa, Sheetu; Katare, Om Prakash
2013-02-28
Lecithin organogels (LOs) are semi-solid systems with immobilized organic liquid phase in 3-D network of self-assembled gelators. This paper attempts to study the various attributes of LOs, starting from selection of materials, optimization of influential components to LO specific characterization. After screening of various components (type of gelators, organic and aqueous phase) and construction of phase diagrams, a D-optimal mixture design was employed for the systematic optimization of the LO composition. The response surface plots were constructed for various response variables, viz. viscosity, gel strength, spreadability and consistency index. The optimized LO composition was searched employing overlay plots. Subsequent validation of the optimization study employing check-point formulations, located using grid search, indicated high degree of prognostic ability of the experimental design. The optimized formulation was characterized for morphology, drug content, rheology, spreadability, pH, phase transition temperatures, and physical and chemical stability. The outcomes of the study were interesting showing high dependence of LO attributes on the type and amount of phospholipid, Poloxamer™, auxillary gelators and organic solvent. The optimized LO was found to be quite stable, easily applicable and biocompatible. The findings of the study can be utilized for the development of LO systems of other drugs for the safer and effective topical delivery. Crown Copyright © 2013. Published by Elsevier B.V. All rights reserved.
Viester, Laura; Verhagen, Evert A L M; Bongers, Paulien M; van der Beek, Allard J
2014-11-01
To evaluate the process of a health promotion program, aiming to improve physical activity levels and diet among construction workers. The process evaluation was conducted after the RE-AIM framework for the evaluation of the public health impact of health promotion interventions. Effectiveness was assessed on motivational stage-of-change, self-efficacy, and decisional balance for physical activity and dietary behavior. The external validity of the trial was satisfactory with representative reach of workers and adoption of workplace units in the participating construction company. The extent to which the program was implemented as intended was modest. The intervention was effective on participants' progress through stages of behavior change. Based on the RE-AIM dimensions, it is concluded that for construction workers, the program is feasible and potentially effective, but adjustments are required before widespread implementation.
Chappell, Paul
2014-01-01
Popular socio-medical discourses surrounding the sexuality of disabled people have tended to subjugate young people with disabilities as de-gendered and asexual. As a result, very little attention has been given to how young people with disabilities in the African context construct their sexual identities. Based on findings from a participatory research study conducted amongst Zulu-speaking youth with physical and visual disabilities in KwaZulu-Natal, this paper argues that young people with disabilities are similar to other non-disabled youth in the way they construct their sexual identities. Using a post-structural framework, it outlines how the young participants construct discursive truths surrounding disability, culture and gender through their discussions of love and relationships. In this context, it is argued that the sexual identities' of young people with physical and visual disabilities actually emerges within the intersectionality of identity discourses.
Exact simulation of max-stable processes.
Dombry, Clément; Engelke, Sebastian; Oesting, Marco
2016-06-01
Max-stable processes play an important role as models for spatial extreme events. Their complex structure as the pointwise maximum over an infinite number of random functions makes their simulation difficult. Algorithms based on finite approximations are often inexact and computationally inefficient. We present a new algorithm for exact simulation of a max-stable process at a finite number of locations. It relies on the idea of simulating only the extremal functions, that is, those functions in the construction of a max-stable process that effectively contribute to the pointwise maximum. We further generalize the algorithm by Dieker & Mikosch (2015) for Brown-Resnick processes and use it for exact simulation via the spectral measure. We study the complexity of both algorithms, prove that our new approach via extremal functions is always more efficient, and provide closed-form expressions for their implementation that cover most popular models for max-stable processes and multivariate extreme value distributions. For simulation on dense grids, an adaptive design of the extremal function algorithm is proposed.
Establishment of stable cell line for inducing KAP1 protein expression.
Liu, Xiaoyan; Khan, Md Asaduzzaman; Cheng, Jingliang; Wei, Chunli; Zhang, Lianmei; Fu, Junjiang
2015-06-01
Generation of the stable cell lines is a highly efficient tool in functional studies of certain genes or proteins, where the particular genes or proteins are inducibly expressed. The KRAB-associated protein-1 (KAP1) is an important transcription regulatory protein, which is investigated in several molecular biological studies. In this study, we have aimed to generate a stable cell line for inducing KAP1 expression. The recombinant plasmid pcDNA5/FRT/TO-KAP1 was constructed at first, which was then transfected into Flp-In™T-REx™-HEK293 cells to establish an inducible pcDNA5/FRT/TO-KAP1-HEK293 cell line. The Western blot analysis showed that the protein level of KAP1 is over-expressed in the established stable cell line by doxycycline induction, both dose and time dependently. Thus we have successfully established stable pcDNA5/FRT/TO-KAP1-HEK293 cell line, which can express KAP1 inducibly. This inducible cell line might be very useful for KAP1 functional studies.
Pricing foreign equity option under stochastic volatility tempered stable Lévy processes
NASA Astrophysics Data System (ADS)
Gong, Xiaoli; Zhuang, Xintian
2017-10-01
Considering that financial assets returns exhibit leptokurtosis, asymmetry properties as well as clustering and heteroskedasticity effect, this paper substitutes the logarithm normal jumps in Heston stochastic volatility model by the classical tempered stable (CTS) distribution and normal tempered stable (NTS) distribution to construct stochastic volatility tempered stable Lévy processes (TSSV) model. The TSSV model framework permits infinite activity jump behaviors of return dynamics and time varying volatility consistently observed in financial markets through subordinating tempered stable process to stochastic volatility process, capturing leptokurtosis, fat tailedness and asymmetry features of returns. By employing the analytical characteristic function and fast Fourier transform (FFT) technique, the formula for probability density function (PDF) of TSSV returns is derived, making the analytical formula for foreign equity option (FEO) pricing available. High frequency financial returns data are employed to verify the effectiveness of proposed models in reflecting the stylized facts of financial markets. Numerical analysis is performed to investigate the relationship between the corresponding parameters and the implied volatility of foreign equity option.
Pinto, B M; Lynn, H; Marcus, B H; DePue, J; Goldstein, M G
2001-01-01
In theory-based interventions for behavior change, there is a need to examine the effects of interventions on the underlying theoretical constructs and the mediating role of such constructs. These two questions are addressed in the Physically Active for Life study, a randomized trial of physician-based exercise counseling for older adults. Three hundred fifty-five patients participated (intervention n = 181, control n = 174; mean age = 65.6 years). The underlying theories used were the Transtheoretical Model, Social Cognitive Theory and the constructs of decisional balance (benefits and barriers), self-efficacy, and behavioral and cognitive processes of change. Motivational readiness for physical activity and related constructs were assessed at baseline, 6 weeks, and 8 months. Linear or logistic mixed effects models were used to examine intervention effects on the constructs, and logistic mixed effects models were used for mediator analyses. At 6 weeks, the intervention had significant effects on decisional balance, self-efficacy, and behavioral processes, but these effects were not maintained at 8 months. At 6 weeks, only decisional balance and behavioral processes were identified as mediators of motivational readiness outcomes. Results suggest that interventions of greater intensity and duration may be needed for sustained changes in mediators and motivational readiness for physical activity among older adults.
Weak convergence to isotropic complex [Formula: see text] random measure.
Wang, Jun; Li, Yunmeng; Sang, Liheng
2017-01-01
In this paper, we prove that an isotropic complex symmetric α -stable random measure ([Formula: see text]) can be approximated by a complex process constructed by integrals based on the Poisson process with random intensity.
Liu, Chongxin; Liu, Hang
2017-01-01
This paper presents a continuous composite control scheme to achieve fixed-time stabilization for nonlinear systems with mismatched disturbances. The composite controller is constructed in two steps: First, uniformly finite time exact disturbance observers are proposed to estimate and compensate the disturbances. Then, based on adding a power integrator technique and fixed-time stability theory, continuous fixed-time stable state feedback controller and Lyapunov functions are constructed to achieve global fixed-time system stabilization. The proposed control method extends the existing fixed-time stable control results to high order nonlinear systems with mismatched disturbances and achieves global fixed-time system stabilization. Besides, the proposed control scheme improves the disturbance rejection performance and achieves performance recovery of nominal system. Simulation results are provided to show the effectiveness, the superiority and the applicability of the proposed control scheme. PMID:28406966
Health Behavior Theory in Physical Activity Game Apps: A Content Analysis
Moxley, Victor BA; MacDonald, Elizabeth
2015-01-01
Background Physical activity games developed for a mobile phone platform are becoming increasingly popular, yet little is known about their content or inclusion of health behavior theory (HBT). Objective The objective of our study was to quantify elements of HBT in physical activity games developed for mobile phones and to assess the relationship between theoretical constructs and various app features. Methods We conducted an analysis of exercise and physical activity game apps in the Apple App Store in the fall of 2014. A total of 52 apps were identified and rated for inclusion of health behavior theoretical constructs using an established theory-based rubric. Each app was coded for 100 theoretical items, containing 5 questions for 20 different constructs. Possible total theory scores ranged from 0 to 100. Descriptive statistics and Spearman correlations were used to describe the HBT score and association with selected app features, respectively. Results The average HBT score in the sample was 14.98 out of 100. One outlier, SuperBetter, scored higher than the other apps with a score of 76. Goal setting, self-monitoring, and self-reward were the most-reported constructs found in the sample. There was no association between either app price and theory score (P=.5074), or number of gamification elements and theory score (P=.5010). However, Superbetter, with the highest HBT score, was also the most expensive app. Conclusions There are few content analyses of serious games for health, but a comparison between these findings and previous content analyses of non-game health apps indicates that physical activity mobile phone games demonstrate higher levels of behavior theory. The most common theoretical constructs found in this sample are known to be efficacious elements in physical activity interventions. It is unclear, however, whether app designers consciously design physical activity mobile phone games with specific constructs in mind; it may be that games lend themselves well to inclusion of theory and any constructs found in significant levels are coincidental. Health games developed for mobile phones could be potentially used in health interventions, but collaboration between app designers and behavioral specialists is crucial. Additionally, further research is needed to better characterize mobile phone health games and the relative importance of educational elements versus gamification elements in long-term behavior change. PMID:26168926
Health Behavior Theory in Physical Activity Game Apps: A Content Analysis.
Payne, Hannah E; Moxley, Victor Ba; MacDonald, Elizabeth
2015-07-13
Physical activity games developed for a mobile phone platform are becoming increasingly popular, yet little is known about their content or inclusion of health behavior theory (HBT). The objective of our study was to quantify elements of HBT in physical activity games developed for mobile phones and to assess the relationship between theoretical constructs and various app features. We conducted an analysis of exercise and physical activity game apps in the Apple App Store in the fall of 2014. A total of 52 apps were identified and rated for inclusion of health behavior theoretical constructs using an established theory-based rubric. Each app was coded for 100 theoretical items, containing 5 questions for 20 different constructs. Possible total theory scores ranged from 0 to 100. Descriptive statistics and Spearman correlations were used to describe the HBT score and association with selected app features, respectively. The average HBT score in the sample was 14.98 out of 100. One outlier, SuperBetter, scored higher than the other apps with a score of 76. Goal setting, self-monitoring, and self-reward were the most-reported constructs found in the sample. There was no association between either app price and theory score (P=.5074), or number of gamification elements and theory score (P=.5010). However, Superbetter, with the highest HBT score, was also the most expensive app. There are few content analyses of serious games for health, but a comparison between these findings and previous content analyses of non-game health apps indicates that physical activity mobile phone games demonstrate higher levels of behavior theory. The most common theoretical constructs found in this sample are known to be efficacious elements in physical activity interventions. It is unclear, however, whether app designers consciously design physical activity mobile phone games with specific constructs in mind; it may be that games lend themselves well to inclusion of theory and any constructs found in significant levels are coincidental. Health games developed for mobile phones could be potentially used in health interventions, but collaboration between app designers and behavioral specialists is crucial. Additionally, further research is needed to better characterize mobile phone health games and the relative importance of educational elements versus gamification elements in long-term behavior change.
Hyam, Roger; Hagedorn, Gregor; Chagnoux, Simon; Röpert, Dominik; Casino, Ana; Droege, Gabi; Glöckler, Falko; Gödderz, Karsten; Groom, Quentin; Hoffmann, Jana; Holleman, Ayco; Kempa, Matúš; Koivula, Hanna; Marhold, Karol; Nicolson, Nicky; Smith, Vincent S.; Triebel, Dagmar
2017-01-01
With biodiversity research activities being increasingly shifted to the web, the need for a system of persistent and stable identifiers for physical collection objects becomes increasingly pressing. The Consortium of European Taxonomic Facilities agreed on a common system of HTTP-URI-based stable identifiers which is now rolled out to its member organizations. The system follows Linked Open Data principles and implements redirection mechanisms to human-readable and machine-readable representations of specimens facilitating seamless integration into the growing semantic web. The implementation of stable identifiers across collection organizations is supported with open source provider software scripts, best practices documentations and recommendations for RDF metadata elements facilitating harmonized access to collection information in web portals. Database URL: http://cetaf.org/cetaf-stable-identifiers PMID:28365724
2013-01-01
Background Understanding children’s physical activity motivation, its antecedents and associations with behavior is important and can be advanced by using self-determination theory. However, research among youth is largely restricted to adolescents and studies of motivation within certain contexts (e.g., physical education). There are no measures of self-determination theory constructs (physical activity motivation or psychological need satisfaction) for use among children and no previous studies have tested a self-determination theory-based model of children’s physical activity motivation. The purpose of this study was to test the reliability and validity of scores derived from scales adapted to measure self-determination theory constructs among children and test a motivational model predicting accelerometer-derived physical activity. Methods Cross-sectional data from 462 children aged 7 to 11 years from 20 primary schools in Bristol, UK were analysed. Confirmatory factor analysis was used to examine the construct validity of adapted behavioral regulation and psychological need satisfaction scales. Structural equation modelling was used to test cross-sectional associations between psychological need satisfaction, motivation types and physical activity assessed by accelerometer. Results The construct validity and reliability of the motivation and psychological need satisfaction measures were supported. Structural equation modelling provided evidence for a motivational model in which psychological need satisfaction was positively associated with intrinsic and identified motivation types and intrinsic motivation was positively associated with children’s minutes in moderate-to-vigorous physical activity. Conclusions The study provides evidence for the psychometric properties of measures of motivation aligned with self-determination theory among children. Children’s motivation that is based on enjoyment and inherent satisfaction of physical activity is associated with their objectively-assessed physical activity and such motivation is positively associated with perceptions of psychological need satisfaction. These psychological factors represent potential malleable targets for interventions to increase children’s physical activity. PMID:24067078
24 CFR 941.203 - Design and construction standards.
Code of Federal Regulations, 2011 CFR
2011-04-01
... 24 Housing and Urban Development 4 2011-04-01 2011-04-01 false Design and construction standards... URBAN DEVELOPMENT PUBLIC HOUSING DEVELOPMENT PHA Eligibility and Program Requirements § 941.203 Design and construction standards. (a) Physical structures shall be designed, constructed and equipped so as...
Birefringent Stable Glass with Predominantly Isotropic Molecular Orientation
NASA Astrophysics Data System (ADS)
Liu, Tianyi; Exarhos, Annemarie L.; Alguire, Ethan C.; Gao, Feng; Salami-Ranjbaran, Elmira; Cheng, Kevin; Jia, Tiezheng; Subotnik, Joseph E.; Walsh, Patrick J.; Kikkawa, James M.; Fakhraai, Zahra
2017-09-01
Birefringence in stable glasses produced by physical vapor deposition often implies molecular alignment similar to liquid crystals. As such, it remains unclear whether these glasses share the same energy landscape as liquid-quenched glasses that have been aged for millions of years. Here, we produce stable glasses of 9-(3,5-di(naphthalen-1-yl)phenyl)anthracene molecules that retain three-dimensional shapes and do not preferentially align in a specific direction. Using a combination of angle- and polarization-dependent photoluminescence and ellipsometry experiments, we show that these stable glasses possess a predominantly isotropic molecular orientation while being optically birefringent. The intrinsic birefringence strongly correlates with increased density, showing that molecular ordering is not required to produce stable glasses or optical birefringence, and provides important insights into the process of stable glass formation via surface-mediated equilibration. To our knowledge, such novel amorphous packing has never been reported in the past.
Joseph, Rodney P; Ainsworth, Barbara E; Mathis, LaTanya; Hooker, Steven P; Keller, Colleen
2017-09-01
We examined the cultural relevance of Social Cognitive Theory (SCT) in the design of a physical activity intervention for African-American women. A qualitative study design was used. Twenty-five African-American women (Mean age = 38.5 years, Mean BMI = 39.4 kg·m2) were enrolled in a series of focus groups (N = 9) to elucidate how 5 SCT constructs (ie, Behavioral Capability, Outcome Expectations, Self-efficacy, Self-regulation, Social Support) can be culturally tailored in the design of a physical activity program for African-American women. For the construct of Behavioral Capability, participants were generally unaware of the amount, intensity, and types of physical activity needed for health benefits. Outcome Expectations associated with physical activity included increased energy, improved health, weight loss, and positive role modeling behaviors. Constructs of Self-efficacy and Self-regulation were elicited through the women perceiving themselves as a primary barrier to physical activity. Participants endorsed the need of a strong social support component and identified a variety of acceptable sources to include in a physical activity program (ie, family, friends, other program participants). Findings explicate the utility of SCT as a behavioral change theoretical basis for tailoring physical activity programs to African-American women.
Lunde, Lars-Kristian; Koch, Markus; Knardahl, Stein; Wærsted, Morten; Mathiassen, Svend Erik; Forsman, Mikael; Holtermann, Andreas; Veiersted, Kaj Bo
2014-10-16
Musculoskeletal disorders have a profound impact on individual health, sickness absence and early retirement, particularly in physically demanding occupations. Demographics are changing in the developed countries, towards increasing proportions of senior workers. These senior workers may have particular difficulties coping with physically demanding occupations while maintaining good health. Previous studies investigating the relationship between physical work demands and musculoskeletal disorders are mainly based on self-reported exposures and lack a prospective design. The aim of this paper is to describe the background and methods and discuss challenges for a field study examining physical demands in construction and health care work and their prospective associations with musculoskeletal disorders, work ability and sickness absence. This protocol describes a prospective cohort study on 1200 construction and health care workers. Participants will answer a baseline questionnaire concerning musculoskeletal complaints, general health, psychosocial and organizational factors at work, work demands, work ability and physical activity during leisure. A shorter questionnaire will be answered every 6th months for a total of two years, together with continuous sickness absence monitoring during this period. Analysis will prospectively consider associations between self-reported physical demands and musculoskeletal disorders, work ability and sickness absence. To obtain objective data on physical exposures, technical measurements will be collected from two subgroups of N = 300 (Group A) and N = 160 (Group B) during work and leisure. Both group A and B will be given a physical health examination, be tested for physical capacity and physical activity will be measured for four days. Additionally, muscle activity, ground reaction force, body positions and physical activity will be examined during one workday for Group B. Analysis of associations between objectively measured exposure data and the outcomes described above will be done separately for these subpopulations. The field study will at baseline produce objectively measured data on physical demands in the construction and health care occupations. In combination with clinical measurements and questionnaire data during follow-up, this will provide a solid foundation to prospectively investigate relationships between physical demands at work and development of musculoskeletal disorders, work ability and sickness absence.
A new physical method to assess handle properties of fabrics made from wood-based fibers
NASA Astrophysics Data System (ADS)
Abu-Rous, M.; Liftinger, E.; Innerlohinger, J.; Malengier, B.; Vasile, S.
2017-10-01
In this work, the handfeel of fabrics made of wood-based fibers such as viscose, modal and Lyocell was investigated in relation to cotton fabrics applying the Tissue Softness Analyzer (TSA) method in comparison to other classical methods. Two different construction groups of textile were investigated. The validity of TSA in assessing textile softness of these constructions was tested. TSA results were compared to human hand evaluation as well as to classical physical measurements like drape coefficient, ring pull-through and Handle-o-meter, as well as a newer device, the Fabric Touch Tester (FTT). Physical methods as well as human hand assessments mostly agreed on the softest and smoothest range, but showed different rankings in the harder/rougher side fabrics. TSA ranking of softness and smoothness corresponded to the rankings by other physical methods as well as with human hand feel for the basic textile constructions.
Faber, Anne; Strøyer, Jesper; Hjortskov, Nis; Schibye, Bente
2010-01-01
To investigate changes of physical performance during long working hours and extended workweeks among construction workers with temporary accommodation in camps. Nineteen construction workers with 12-h workdays and extended workweeks participated. Physical performance in the morning and evening of the second and eleventh workdays was tested by endurance, ability to react to a sudden load, flexibility of the back, handgrip strength and sub-maximal HR during a bicycle test. HR was registered throughout two separate workdays. HR during each of the two separate workdays corresponded to a relative workload of 25%. Sub-maximal HR was lower, reaction time faster and handgrip strength higher in the end of each test day. In the end of the work period, sub-maximal HR was lower, reaction time faster and sitting balance was better. No trends of decreased physical performance were found after a workday or a work period.
[Application of spectral optical coherent tomography (SOCT) in ophthalmology].
Bieganowski, Lech; Wojtkowski, Maciej; Kowalczyk, Andrzej; Kałuzny, Jakub J
2004-01-01
The article describes spectral optical coherent tomography (SOCT) constructed by Medical Physics Group, Faculty of Physics, Astronomy and Informatics at Nicholas Copernicus University in Toruń (Poland). It presents the physical bases for the functioning of the constructed device and includes pictures of optical sections of various elements of the eyeball: an optic disc and the region of central fovea, a cornea and angle structures (trabecular meshwork). The article also discusses potential application of SOCT in ophthalmic diagnosis of anterior and posterior segments of the eye.
De Smedt, Delphine; Clays, Els; Doyle, Frank; Kotseva, Kornelia; Prugger, Christof; Pająk, Andrzej; Jennings, Catriona; Wood, David; De Bacquer, Dirk
2013-09-01
To investigate the validity and reliability of the EuroQol-5D (EQ-5D), the 12-item Short-Form Health Survey (SF-12v2), and the Hospital Anxiety and Depression Scale (HADS) in a stable coronary population. Cross-sectional study EUROASPIRE III. Quality of life data (QoL) were available on 8745 patients hospitalized for coronary artery bypass graft (CABG), percutaneous coronary intervention (PCI), acute myocardial infarction (AMI), or myocardial ischemia. They were interviewed and examined at least 6 months after their hospital admission. Reliability and validity of the 3 instruments were tested. Internal consistency, and discriminative, convergent, criterion and construct validity were assessed. Cronbach's alpha indicated good internal consistency for all measures (0.73 to 0.87). Discriminative validity analyses confirmed significant QoL differences between known groups: age, gender, educational level. In addition, all hypothesized correlations between QoL constructs (convergent validity) and items (criterion validity) were confirmed with significant correlations. Confirmatory factor analyses indicated good construct validity for HADS and SF-12v2. On country-specific level, results were roughly similar. The EQ-5D as well as the SF-12v2 and the HADS are reliable and valid instruments for use in a stable coronary population, both on aggregate European level and on country-specific level. However, our results must be generalized with caution, because EUROASPIRE III patients might not be representative for all patients with stable coronary heart disease. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.
Highly stable lipid-encapsulation of fluorescent nanodiamonds for bioimaging applications.
Sotoma, Shingo; Hsieh, Feng-Jen; Chen, Yen-Wei; Tsai, Pei-Chang; Chang, Huan-Cheng
2018-01-23
Highly stable lipid-encapsulated fluorescent nanodiamonds (FNDs) are produced by photo-crosslinking of diacetylene-containing lipids physically attached to the FND surface. Not only is this coating method simple and fast, but also it gives the FND-lipid hybrids favorable properties for bioapplications. The hybrids are useful as fluorescent biolabels as well as fiducial markers for correlative light and electron microscopy.
Gonzalez, Brian D; Jim, Heather S L; Small, Brent J; Sutton, Steven K; Fishman, Mayer N; Zachariah, Babu; Heysek, Randy V; Jacobsen, Paul B
2016-05-01
The purpose of the study is to examine changes in muscle strength and self-reported physical functioning in men receiving androgen deprivation therapy (ADT) for prostate cancer compared to matched controls. Prostate cancer patients scheduled to begin ADT (n = 62) were assessed within 20 days of starting ADT and 6 and 12 months later. Age and geographically matched prostate cancer controls treated with prostatectomy only (n = 86) were assessed at similar time intervals. Grip strength measured upper body strength, the Chair Rise Test measured lower body strength, and the SF-12 Physical Functioning scale measured self-reported physical functioning. As expected, self-reported physical functioning and upper body muscle strength declined in ADT recipients but remained stable in prostate cancer controls. Contrary to expectations, lower body muscle strength remained stable in ADT recipients but improved in prostate cancer controls. Higher Gleason scores, more medical comorbidities, and less exercise at baseline predicted greater declines in physical functioning in ADT recipients. ADT is associated with declines in self-reported physical functioning and upper body muscle strength as well as worse lower body muscle strength relative to prostate cancer controls. These findings should be included in patient education regarding the risks and benefits of ADT. Findings also underscore the importance of conducting research on ways to prevent or reverse declines in physical functioning in this patient population.
ERIC Educational Resources Information Center
Guisasola, Jenaro; Ceberio, Mikel; Zubimendi, Jose Luis
2006-01-01
The study we present tries to explore how first year engineering students formulate hypotheses in order to construct their own problem solving structure when confronted with problems in physics. Under the constructivistic perspective of the teaching-learning process, the formulation of hypotheses plays a key role in contrasting the coherence of…
Low-Cost In-Fill Installation for High-Energy-Saving, Dynamic Windows
2017-07-01
greenhouse gas, HVAC, low emissivity, military construction, photovoltaic, physical vapor deposition, solar heat gain coefficient... Physical vapor deposition ROICC Resident Officer In Charge of Construction SHGC Solar heat gain coefficient S/RM Sustainment, Restoration, and...PERMITS AND REGULATIONS Regulations - The demonstration project planning and implementation followed US Army Corps of Engineers Safety and Health
Some Consequences of Prompting Novice Physics Students to Construct Force Diagrams
ERIC Educational Resources Information Center
Heckler, Andrew F.
2010-01-01
We conducted a series of experiments to investigate the extent to which prompting the construction of a force diagram affects student solutions to simple mechanics problems. A total of 891 university introductory physics students were given typical force and motion problems under one of the two conditions: when a force diagram was or was not…
21 CFR 111.20 - What design and construction requirements apply to your physical plant?
Code of Federal Regulations, 2010 CFR
2010-04-01
... 21 Food and Drugs 2 2010-04-01 2010-04-01 false What design and construction requirements apply to your physical plant? 111.20 Section 111.20 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION CURRENT GOOD MANUFACTURING PRACTICE IN...
ERIC Educational Resources Information Center
Abu-Hilal, Maher M.; Zayed, Kashef
2011-01-01
Introduction: Optimism and pessimism are two psychological constructs that play a significant role in human mental and psychological hygiene. The two construct are strongly but negatively correlated. Optimism and pessimism can be influenced by culture and the environment. The present study attempts to test the structure of optimism and pessimism…
Fire-resistant materials for aircraft passenger seat construction
NASA Technical Reports Server (NTRS)
Fewell, L. L.; Tesoro, G. C.; Moussa, A.; Kourtides, D. A.
1979-01-01
The thermal response characteristics of fabric and fabric-foam assemblies are described. The various aspects of the ignition behavior of contemporary aircraft passenger seat upholstery fabric materials relative to fabric materials made from thermally stable polymers are evaluated. The role of the polymeric foam backing on the thermal response of the fabric-foam assembly is also ascertained. The optimum utilization of improved fire-resistant fabric and foam materials in the construction of aircraft passenger seats is suggested.
NASA Astrophysics Data System (ADS)
Sarna, Neeraj; Torrilhon, Manuel
2018-01-01
We define certain criteria, using the characteristic decomposition of the boundary conditions and energy estimates, which a set of stable boundary conditions for a linear initial boundary value problem, involving a symmetric hyperbolic system, must satisfy. We first use these stability criteria to show the instability of the Maxwell boundary conditions proposed by Grad (Commun Pure Appl Math 2(4):331-407, 1949). We then recognise a special block structure of the moment equations which arises due to the recursion relations and the orthogonality of the Hermite polynomials; the block structure will help us in formulating stable boundary conditions for an arbitrary order Hermite discretization of the Boltzmann equation. The formulation of stable boundary conditions relies upon an Onsager matrix which will be constructed such that the newly proposed boundary conditions stay close to the Maxwell boundary conditions at least in the lower order moments.
Tsuzuki, Takayoshi; Takano, Satoshi; Sakaguchi, Natsumi; Kudoh, Takashi; Murayama, Takashi; Sakurai, Takashi; Hashii, Minako; Higashida, Haruhiro; Weber, Karin; Guse, Andreas H; Kameda, Tomoshi; Hirokawa, Takatsugu; Kumaki, Yasuhiro; Arisawa, Mitsuhiro; Potter, Barry V L; Shuto, Satoshi
2014-01-01
Here we describe the successful synthesis of cyclic ADP-4-thioribose (cADPtR, 3 ), designed as a stable mimic of cyclic ADP-ribose (cADPR, 1 ), a Ca 2+ -mobilizing second messenger, in which the key N1-β-thioribosyladenosine structure was stereoselectively constructed by condensation between the imidazole nucleoside derivative 8 and the 4-thioribosylamine 7 via equilibrium in 7 between the α-anomer ( 7α ) and the β-anomer ( 7β ) during the reaction course. cADPtR is, unlike cADPR, chemically and biologically stable, while it effectively mobilizes intracellular Ca 2+ like cADPR in various biological systems, such as sea urchin homogenate, NG108-15 neuronal cells, and Jurkat T-lymphocytes. Thus, cADPtR is a stable equivalent of cADPR, which can be useful as a biological tool for investigating cADPR-mediated Ca 2+ -mobilizing pathways.
Development of a design methodology for asphalt treated mixtures.
DOT National Transportation Integrated Search
2013-12-01
This report summarizes the results of a study that was conducted to develop a simplified design methodology for asphalt : treated mixtures that are durable, stable, constructible, and cost effective through the examination of the performance of : mix...
Historic bluff retreat and stabilization at Flag Harbor, Chesapeake Bay, Maryland
Clark, Inga; Larsen, Curtis E.; McRae, Michele
2002-01-01
Studies of bluff erosion and slope stability along the western shore of Chesapeake Bay suggest relative evolution from steep, eroding coastal bluffs to stable slopes at angles of repose ca. 35 degrees over decades. Because of the dating methods in those studies, it was impossible to precisely define rates of change. The present study provides historic age control. A pair of small harbor structures were constructed in the early 1950's at Chesapeake Beach, MD to maintain a dredged channel to a small marina occupying a ravine in the Calvert Cliffs. Prior to construction, this section of shoreline was comprised of eroding steep bluffs cut into Miocene-age sediments. Downdrift erosion is now apparent south of the structures as is updrift deposition behind the northern jetty. Since construction the updrift sand body has prograded northward and progressively deposited protective beaches along the toes of the bluffs. Former eroding bluffs nearest the harbor are now stable, vegetated slopes at angles near 35 degrees. Slope angles widen to the north and to the northern limit of the sand body. Beyond this are eroding bluffs standing at angles of 70-80 degrees. The relative time required for eroding bluffs to reach stability is estimated by interpolating the distance and time for the sand body to prograde northward since harbor construction. We measured slope angles at intervals northward from the updrift structure for a distance of 2000 feet. A least squares regression of slope angle vs distance showed progressive decrease in angle from north to south. Actively eroding 70-80 degree bluffs gave way to vegetated, but slumping slopes, and finally to stable 35-degree slopes at the harbor. A relationship between time and distance along the shore allowed us to estimate a stabilization time for this location of 35-40 years. The shortness of this time scale allows us to suggest that attempts to artificially stabilize eroding bluffs along this coast is not a simple task of protecting the toes of slopes from wave action. Once shoreline retreat ends, sloughing of sediment from bluff faces gives way to longer-term landslide processes. The bluff top recedes until a stable 35-degree slope is attained. Thus, simple shoreline protection methods may not preserve property at the bluff edge.
MicroRNA-Mediated Myostatin Silencing in Caprine Fetal Fibroblasts
Zhong, Bushuai; Zhang, Yanli; Yan, Yibo; Wang, Ziyu; Ying, Shijia; Huang, Mingrui; Wang, Feng
2014-01-01
Myostatin functions as a negative regulator of skeletal muscle growth by suppressing proliferation and differentiation of myoblasts. Dysfunction of the myostatin gene, either due to natural mutation or genetic manipulations such as knockout or knockdown, has been reported to increase muscle mass in mammalian species. RNA interference (RNAi) mediated by microRNAs (miRNAs) is a promising method for gene knockdown studies. In the present study, transient and stable silencing of the myostatin gene in caprine fetal fibroblasts (CFF) was evaluated using the two most effective constructs selected from four different miRNA expression constructs screened in 293FT cells. Using these two miRNA constructs, we achieved up to 84% silencing of myostatin mRNA in transiently transfected CFF cells and up to 31% silencing in stably transfected CFF cells. Moreover, off-target effects due to induction of interferon (IFN) response genes, such as interferon beta (IFN-β) and 2′-5′-oligoadenylate synthetase 2 (OAS2), were markedly fewer in stably transfected CFF cells than in transiently transfected cells. Stable expression of anti-myostatin miRNA with minimal induction of interferon shows great promise for increasing muscle mass in transgenic goats. PMID:25244645
Abasi, Mohammad Hadi; Eslami, Ahmad Ali; Rakhshani, Fatemeh; Shiri, Mansoor
2016-01-01
Self-regulation is one of the current psychological concepts that have been known as a determinant of leisure time physical activity. Due to cultural and social diversity in different societies and age groups, application of specific questionnaires is essential to perform investigations about physical activities. The aim of this study is development and evaluation of psychometric properties of a self-regulation questionnaire about leisure time physical activity in Iranian male adolescents. This cross-sectional study was conducted in 2013, and data of 603 male students from 12 high schools in Isfahan were collected. A comprehensive literature review and similar questionnaire review were conducted and 25 items were selected or developed to measure self-regulation. Comprehensibility of items was evaluated in a pilot study and an expert panel evaluated face and content validity. Exploratory factors analysis (EFA) was used for evaluation of construct validity and extraction of sub-constructs of self-regulation. Leisure time physical activity was assessed using International Physical Activity Questionnaire (IPAQ). The mean age of the participants was 16.3 years (SD =1.0) and the range was 15-19 years. Cronbach's α coefficient of the questionnaire in the pilot and main study was 0.84 and 0.90, respectively. EFA resulted in four sub-constructs including "enlistment of social support", "goal setting", "self-construction", and "self-monitoring", which explained 63.6% of the variance of self-regulation. Results of this investigation provide some support to the validity and reliability of the 16-item questionnaire of self-regulation abut leisure time physical activity in the target group.
Li, Kin-Kit; Chan, Darius K S
2008-02-01
This study examined how goal conflict influences the pattern of the moderating effects of intention stability on the intention-behavior relations in the context of physical activity participation. A longitudinal study of 136 young adult students with three waves of data collection (a 2-week interval between waves) was conducted. Results showed a significant three-way interaction among intention, goal conflict,& intention stability in explaining vigorous-intensity physical activity (Beta = -.25, p < .05). Consistent with our expectation, the pattern of the three-way interaction revealed that when the level of goal conflict was low, the intention-behavior relations were stronger with stable intentions and weaker with unstable intentions. However, when the level of goal conflict was high, the intention-behavior relations were weaker with stable intentions and stronger with unstable intentions. Possible underlying processes of goal conflict and intention stability on the intention-behavior relations are discussed.
2012-01-01
Background The purpose of this study was to examine the internal consistency, test-retest reliability, construct validity and predictive validity of a new German self-report instrument to assess the influence of social support and the physical environment on physical activity in adolescents. Methods Based on theoretical consideration, the short scales on social support and physical environment were developed and cross-validated in two independent study samples of 9 to 17 year-old girls and boys. The longitudinal sample of Study I (n = 196) was recruited from a German comprehensive school, and subjects in this study completed the questionnaire twice with a between-test interval of seven days. Cronbach’s alphas were computed to determine the internal consistency of the factors. Test-retest reliability of the latent factors was assessed using intra-class coefficients. Factorial validity of the scales was assessed using principle components analysis. Construct validity was determined using a cross-validation technique by performing confirmatory factor analysis with the independent nationwide cross-sectional sample of Study II (n = 430). Correlations between factors and three measures of physical activity (objectively measured moderate-to-vigorous physical activity (MVPA), self-reported habitual MVPA and self-reported recent MVPA) were calculated to determine the predictive validity of the instrument. Results Construct validity of the social support scale (two factors: parental support and peer support) and the physical environment scale (four factors: convenience, public recreation facilities, safety and private sport providers) was shown. Both scales had moderate test-retest reliability. The factors of the social support scale also had good internal consistency and predictive validity. Internal consistency and predictive validity of the physical environment scale were low to acceptable. Conclusions The results of this study indicate moderate to good reliability and construct validity of the social support scale and physical environment scale. Predictive validity was only confirmed for the social support scale but not for the physical environment scale. Hence, it remains unclear if a person’s physical environment has a direct or an indirect effect on physical activity behavior or a moderation function. PMID:22928865
Reimers, Anne K; Jekauc, Darko; Mess, Filip; Mewes, Nadine; Woll, Alexander
2012-08-29
The purpose of this study was to examine the internal consistency, test-retest reliability, construct validity and predictive validity of a new German self-report instrument to assess the influence of social support and the physical environment on physical activity in adolescents. Based on theoretical consideration, the short scales on social support and physical environment were developed and cross-validated in two independent study samples of 9 to 17 year-old girls and boys. The longitudinal sample of Study I (n = 196) was recruited from a German comprehensive school, and subjects in this study completed the questionnaire twice with a between-test interval of seven days. Cronbach's alphas were computed to determine the internal consistency of the factors. Test-retest reliability of the latent factors was assessed using intra-class coefficients. Factorial validity of the scales was assessed using principle components analysis. Construct validity was determined using a cross-validation technique by performing confirmatory factor analysis with the independent nationwide cross-sectional sample of Study II (n = 430). Correlations between factors and three measures of physical activity (objectively measured moderate-to-vigorous physical activity (MVPA), self-reported habitual MVPA and self-reported recent MVPA) were calculated to determine the predictive validity of the instrument. Construct validity of the social support scale (two factors: parental support and peer support) and the physical environment scale (four factors: convenience, public recreation facilities, safety and private sport providers) was shown. Both scales had moderate test-retest reliability. The factors of the social support scale also had good internal consistency and predictive validity. Internal consistency and predictive validity of the physical environment scale were low to acceptable. The results of this study indicate moderate to good reliability and construct validity of the social support scale and physical environment scale. Predictive validity was only confirmed for the social support scale but not for the physical environment scale. Hence, it remains unclear if a person's physical environment has a direct or an indirect effect on physical activity behavior or a moderation function.
Jo, Sunhwan; Bahar, Ivet; Roux, Benoît
2014-01-01
Biomolecular conformational transitions are essential to biological functions. Most experimental methods report on the long-lived functional states of biomolecules, but information about the transition pathways between these stable states is generally scarce. Such transitions involve short-lived conformational states that are difficult to detect experimentally. For this reason, computational methods are needed to produce plausible hypothetical transition pathways that can then be probed experimentally. Here we propose a simple and computationally efficient method, called ANMPathway, for constructing a physically reasonable pathway between two endpoints of a conformational transition. We adopt a coarse-grained representation of the protein and construct a two-state potential by combining two elastic network models (ENMs) representative of the experimental structures resolved for the endpoints. The two-state potential has a cusp hypersurface in the configuration space where the energies from both the ENMs are equal. We first search for the minimum energy structure on the cusp hypersurface and then treat it as the transition state. The continuous pathway is subsequently constructed by following the steepest descent energy minimization trajectories starting from the transition state on each side of the cusp hypersurface. Application to several systems of broad biological interest such as adenylate kinase, ATP-driven calcium pump SERCA, leucine transporter and glutamate transporter shows that ANMPathway yields results in good agreement with those from other similar methods and with data obtained from all-atom molecular dynamics simulations, in support of the utility of this simple and efficient approach. Notably the method provides experimentally testable predictions, including the formation of non-native contacts during the transition which we were able to detect in two of the systems we studied. An open-access web server has been created to deliver ANMPathway results. PMID:24699246
Noise-induced extinction for a ratio-dependent predator-prey model with strong Allee effect in prey
NASA Astrophysics Data System (ADS)
Mandal, Partha Sarathi
2018-04-01
In this paper, we study a stochastically forced ratio-dependent predator-prey model with strong Allee effect in prey population. In the deterministic case, we show that the model exhibits the stable interior equilibrium point or limit cycle corresponding to the co-existence of both species. We investigate a probabilistic mechanism of the noise-induced extinction in a zone of stable interior equilibrium point. Computational methods based on the stochastic sensitivity function technique are applied for the analysis of the dispersion of random states near stable interior equilibrium point. This method allows to construct a confidence domain and estimate the threshold value of the noise intensity for a transition from the coexistence to the extinction.
19 CFR 146.61 - Constructive transfer to Customs territory.
Code of Federal Regulations, 2012 CFR
2012-04-01
... constructively transferred to Customs territory at that time, even though the merchandise remains physically in... time to be constructively transferred back into the zone in its previous zone status. ... 19 Customs Duties 2 2012-04-01 2012-04-01 false Constructive transfer to Customs territory. 146.61...
19 CFR 146.61 - Constructive transfer to Customs territory.
Code of Federal Regulations, 2014 CFR
2014-04-01
... constructively transferred to Customs territory at that time, even though the merchandise remains physically in... time to be constructively transferred back into the zone in its previous zone status. ... 19 Customs Duties 2 2014-04-01 2014-04-01 false Constructive transfer to Customs territory. 146.61...
19 CFR 146.61 - Constructive transfer to Customs territory.
Code of Federal Regulations, 2013 CFR
2013-04-01
... constructively transferred to Customs territory at that time, even though the merchandise remains physically in... time to be constructively transferred back into the zone in its previous zone status. ... 19 Customs Duties 2 2013-04-01 2013-04-01 false Constructive transfer to Customs territory. 146.61...
19 CFR 146.61 - Constructive transfer to Customs territory.
Code of Federal Regulations, 2011 CFR
2011-04-01
... constructively transferred to Customs territory at that time, even though the merchandise remains physically in... time to be constructively transferred back into the zone in its previous zone status. ... 19 Customs Duties 2 2011-04-01 2011-04-01 false Constructive transfer to Customs territory. 146.61...
19 CFR 146.61 - Constructive transfer to Customs territory.
Code of Federal Regulations, 2010 CFR
2010-04-01
... constructively transferred to Customs territory at that time, even though the merchandise remains physically in... time to be constructively transferred back into the zone in its previous zone status. ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Constructive transfer to Customs territory. 146.61...
Model-based reasoning in the physics laboratory: Framework and initial results
NASA Astrophysics Data System (ADS)
Zwickl, Benjamin M.; Hu, Dehui; Finkelstein, Noah; Lewandowski, H. J.
2015-12-01
[This paper is part of the Focused Collection on Upper Division Physics Courses.] We review and extend existing frameworks on modeling to develop a new framework that describes model-based reasoning in introductory and upper-division physics laboratories. Constructing and using models are core scientific practices that have gained significant attention within K-12 and higher education. Although modeling is a broadly applicable process, within physics education, it has been preferentially applied to the iterative development of broadly applicable principles (e.g., Newton's laws of motion in introductory mechanics). A significant feature of the new framework is that measurement tools (in addition to the physical system being studied) are subjected to the process of modeling. Think-aloud interviews were used to refine the framework and demonstrate its utility by documenting examples of model-based reasoning in the laboratory. When applied to the think-aloud interviews, the framework captures and differentiates students' model-based reasoning and helps identify areas of future research. The interviews showed how students productively applied similar facets of modeling to the physical system and measurement tools: construction, prediction, interpretation of data, identification of model limitations, and revision. Finally, we document students' challenges in explicitly articulating assumptions when constructing models of experimental systems and further challenges in model construction due to students' insufficient prior conceptual understanding. A modeling perspective reframes many of the seemingly arbitrary technical details of measurement tools and apparatus as an opportunity for authentic and engaging scientific sense making.
Physlets and Web-based Physics Curricular Material
NASA Astrophysics Data System (ADS)
Cain, L. S.; Boye, D. M.; Christian, W.
1998-11-01
The WWW provides the most uniformly standardized and stable mode of networked information sharing available to date. Physlets, scriptable Java applets specific to physics pedagogy, provide the source around which interactive exercises can be created across the physics curriculum. We have developed WWW-based curricular materials appropriate for courses at the introductory and intermediate level. These include interactive demonstrations, homework assignments, pre-lab and post-lab exercises. A variety of examples, which have been used in courses in musical technology, general physics, physics for non-science majors, and modern physics, will be discussed.
Carver, S E; Heath, C A
1999-11-05
Equine articular chondrocytes, embedded within a polyglycolic acid nonwoven mesh, were cultured with various combinations of intermittent pressure, fluid flow, and mixing to examine the effects of different physical stimuli on neochondrogenesis from young cells. The cell/polymer constructs were cultured first in 125 ml spinner flasks for 1, 2, or 4 weeks and then in a perfusion system with intermittent pressure for a total of up to 6 weeks. Additional constructs were either cultured for all 6 weeks in the spinner flasks or for 1 week in spinners followed by 5 weeks in the perfusion system without intermittent pressure. Tissue constructs cultivated for 2 or 4 weeks in spinner flasks followed by perfusion with intermittent pressure had significantly higher concentrations of both sulfated glycosaminoglycan and collagen than constructs cultured entirely in spinners or almost entirely in the pressure/perfusion system. Initial cultivation in the spinner flasks, with turbulent mixing, enhanced both cell attachment and early development of the extracellular matrix. Subsequent culture with perfusion and intermittent pressure appeared to accelerate matrix formation. While the correlation was much stronger in the pressurized constructs, the compressive modulus was directly proportional to the concentration of sulfated glycosaminoglycan in all physically stressed constructs. Constructs that were not stressed beyond the 1-week seeding period lost mechanical integrity upon harvest, suggesting that physical stimulation, particularly with intermittent pressure, of immature tissue constructs during their development may contribute to their ultimate biomechanical functionality. Copyright 1999 John Wiley & Sons, Inc.
3D-Web-GIS RFID location sensing system for construction objects.
Ko, Chien-Ho
2013-01-01
Construction site managers could benefit from being able to visualize on-site construction objects. Radio frequency identification (RFID) technology has been shown to improve the efficiency of construction object management. The objective of this study is to develop a 3D-Web-GIS RFID location sensing system for construction objects. An RFID 3D location sensing algorithm combining Simulated Annealing (SA) and a gradient descent method is proposed to determine target object location. In the algorithm, SA is used to stabilize the search process and the gradient descent method is used to reduce errors. The locations of the analyzed objects are visualized using the 3D-Web-GIS system. A real construction site is used to validate the applicability of the proposed method, with results indicating that the proposed approach can provide faster, more accurate, and more stable 3D positioning results than other location sensing algorithms. The proposed system allows construction managers to better understand worksite status, thus enhancing managerial efficiency.
3D-Web-GIS RFID Location Sensing System for Construction Objects
2013-01-01
Construction site managers could benefit from being able to visualize on-site construction objects. Radio frequency identification (RFID) technology has been shown to improve the efficiency of construction object management. The objective of this study is to develop a 3D-Web-GIS RFID location sensing system for construction objects. An RFID 3D location sensing algorithm combining Simulated Annealing (SA) and a gradient descent method is proposed to determine target object location. In the algorithm, SA is used to stabilize the search process and the gradient descent method is used to reduce errors. The locations of the analyzed objects are visualized using the 3D-Web-GIS system. A real construction site is used to validate the applicability of the proposed method, with results indicating that the proposed approach can provide faster, more accurate, and more stable 3D positioning results than other location sensing algorithms. The proposed system allows construction managers to better understand worksite status, thus enhancing managerial efficiency. PMID:23864821
A Program of Basic Research for High Power Switching and Other High Power Devices
1989-05-23
Physics Topical Group/American Physical Society, Baltimore, Maryland, April 18-21, 1988, Bull. Am. Phys. Soc. 33, 1082 (1988). "New High Power Thyratrons...American Physical Society, Baltimore, Maryland, April 18-21, 1988, Bull. Am. Phys. Soc. 33, 1082 (1988). "A plasma lens candidate with highly stable...April 18-21, 1988, Bull. Am. Phys. Soc. 33. 1082 (1988). "New High Power Thyratrons for High Energy Physics Applications," W. Hartmann, G. Kirkman, M.A
Caban-Martinez, Alberto J; Lowe, Kincaid A; Herrick, Robert; Kenwood, Christopher; Gagne, Joshua J; Becker, Jamie F; Schneider, Scott P; Dennerlein, Jack T; Sorensen, Glorian
2014-07-01
While exercise has been shown to be beneficial for some musculoskeletal pain conditions, construction workers who are regularly burdened with musculoskeletal pain may engage less in leisure-time physical activity (LTPA) due to pain. In a small pilot study, we investigate how musculoskeletal pain may influence participation in LTPA among construction workers. A sequential explanatory mixed-methods design was employed using a jobsite-based survey (n = 43) among workers at two commercial construction sites and one focus group (n = 5). Over 93% of these construction workers reported engaging in LTPA and 70% reported musculoskeletal pain. Fifty-seven percent of workers who met either moderate or vigorous LTPA guidelines reported lower extremity pain (i.e., ankle, knee) compared with 21% of those who did not engage in either LTPA (P = 0.04). Focus group analyses indicate that workers felt they already get significant physical activity out of their job because they are "moving all the time and not sitting behind a desk." Workers also felt they "have no choice but to work through pain and discomfort [as the worker] needs to do anything to get the job done." Pilot study findings suggest that construction workers not only engage in either moderate or vigorous LTPA despite musculoskeletal pain but workers in pain engage in more LTPA than construction workers without pain. © 2014 Wiley Periodicals, Inc.
Effect of drainage in unbound aggregate bases on flexible pavement performance.
DOT National Transportation Integrated Search
2009-03-01
The main objective of this study is to optimize the gradation of Mexican limestone aggregate for use as an unbound drainable base material that has adequate permeability while staying structurally stable during the construction time and the pavement...
Real time monitoring of slope stability in eastern Oklahoma.
DOT National Transportation Integrated Search
2014-01-01
There were three primary objectives of the proposed research. The first was to establish a : comprehensive landslide database, the second was to create a first- cut regional landslide map and : the third was to relate safe and stable constructed slop...
ERIC Educational Resources Information Center
Chen, Zhongzhou; Gladding, Gary
2014-01-01
Visual representations play a critical role in teaching physics. However, since we do not have a satisfactory understanding of how visual perception impacts the construction of abstract knowledge, most visual representations used in instructions are either created based on existing conventions or designed according to the instructor's intuition,…
ERIC Educational Resources Information Center
Purwandari, Ristiana Dyah
2015-01-01
The investigation aims in this study were to uncover the observations of infrastructures and physics laboratory in vocational high school for Stone and Concrete Construction Techniques Expertise Field or Teknik Konstruksi Batu dan Beton (TKBB)'s in Purwokerto Central Java Province, mapping the Vocational High School or Sekolah Menengah Kejuruan…
Tell Me a Story: How Children's Developing Domain Knowledge Affects Their Story Construction
ERIC Educational Resources Information Center
Sobel, David M.; Weisberg, Deena Skolnick
2014-01-01
Young children distinguish between the physical and biological domains of knowledge. The current study examines how this distinction is expressed in a story construction task. Three- and 4-year-olds were shown pairs of pictures, one that depicted a normal event and one that depicted an event that violated either physical or biological causal…
ERIC Educational Resources Information Center
MacPhail, Ann
2007-01-01
Background: The level of influence teachers have over changing developments in curricula to suit their individual schools is not matched by the influence they possess in the development of such curricula outside of the school context. Bernstein's model of the social construction of pedagogic discourse allows examination of the development,…
In vitro physical stimulation of tissue-engineered and native cartilage.
Li, Kelvin W; Klein, Travis J; Chawla, Kanika; Nugent, Gayle E; Bae, Won C; Sah, Robert L
2004-01-01
Because of the limited availability of donor cartilage for resurfacing defects in articular surfaces, there is tremendous interest in the in vitro bioengineering of cartilage replacements for clinical applications. However, attaining mechanical properties in engineered cartilaginous constructs that approach those of native cartilage has not been previously achieved when constructs are cultured under free-swelling conditions. One approach toward stimulating the development of constructs that are mechanically more robust is to expose them to physical environments that are similar, in certain ways, to those encountered by native cartilage. This is a strategy motivated by observations in numerous short-term experiments that certain mechanical signals are potent stimulators of cartilage metabolism. On the other hand, excess mechanical loading can have a deleterious effect on cartilage. Culture conditions that include a physical stimulation component are made possible by the use of specialized bioreactors. This chapter addresses some of the issues involved in using bioreactors as integral components of cartilage tissue engineering and in studying the physical regulation of cartilage. We first consider the generation of cartilaginous constructs in vitro. Next we describe the rationale and design of bioreactors that can impart either mechanical deformation or fluid-induced mechanical signals.
Physical and chemical stability of pemetrexed in infusion solutions.
Zhang, Yanping; Trissel, Lawrence A
2006-06-01
Pemetrexed is a multitargeted, antifolate, antineoplastic agent that is indicated for single-agent use in locally advanced or metastatic non-small-cell lung cancer after prior chemotherapy and in combination with cisplatin for the treatment of malignant pleural mesothelioma not treatable by surgery. Currently, there is no information on the long-term stability of pemetrexed beyond 24 hours. To evaluate the longer-term physical and chemical stability of pemetrexed 2, 10, and 20 mg/mL in polyvinyl chloride (PVC) bags of dextrose 5% injection and NaCl 0.9% injection. Triplicate samples of pemetrexed were prepared in the concentrations and infusion solutions required. Evaluations for physical and chemical stability were performed initially and over 2 days at 23 degrees C protected from light and exposed to fluorescent light, and over 31 days of storage at 4 degrees C protected from light. Physical stability was assessed using turbidimetric and particulate measurement as well as visual observation. Chemical stability was evaluated by HPLC. All pemetrexed solutions remained chemically stable, with little or no loss of pemetrexed over 2 days at 23 degrees C, protected from light and exposed to fluorescent light, and over 31 days of storage at 4 degrees C, protected from light. The room temperature samples were physically stable throughout the 48 hour test period. However, pemetrexed admixtures developed large numbers of microparticulates during refrigerated storage exceeding 24 hours. Pemetrexed is chemically stable for 2 days at room temperature and 31 days refrigerated in dextrose 5% injection and NaCl 0.9% injection. However, substantial numbers of microparticulates may form in pemetrexed diluted in the infusion solutions in PVC bags, especially during longer periods of refrigerated storage. Limiting the refrigerated storage period to the manufacturer-recommended 24 hours will limit particulate formation.
ERIC Educational Resources Information Center
Çetin, Ali
2016-01-01
The purpose of this study was to describe high school students' "physics", physics lesson" and "physics teacher" conceptions by using metaphors. 313 students participated in the study from different high school types in Siirt, Turkey. A metaphorical perception form constructed by researcher was individually conducted,…
Functional Specification and Simulation of a Floating Point Co-Processor for SPUR
1986-08-01
depend on this state will not be stable until the next phase; this leaves the problem of how to control events that must occur on phi 1 of a cycle. The... problems with the structure of the chip description. The worst of these problems is the absence of Slang constructs for coding separate chip component...constructs such as UNK as well. Another related problem was the inability to explicitly declare the size of Slang node values. \\Vhile the correct
NASA Astrophysics Data System (ADS)
Rebello, Carina M.
This study explored the effects of alternative forms of argumentation on undergraduates' physics solutions in introductory calculus-based physics. A two-phase concurrent mixed methods design was employed to investigate relationships between undergraduates' written argumentation abilities, conceptual quality of problem solutions, as well as approaches and strategies for solving argumentative physics problems across multiple physics topics. Participants were assigned via stratified sampling to one of three conditions (control, guided construct, or guided evaluate) based on gender and pre-test scores on a conceptual instrument. The guided construct and guided evaluate groups received tasks and prompts drawn from literature to facilitate argument construction or evaluation. Using a multiple case study design, with each condition serving as a case, interviews were conducted consisting of a think-aloud problem solving session paired with a semi-structured interview. The analysis of problem solving strategies was guided by the theoretical framework on epistemic games adapted by Tuminaro and Redish (2007). This study provides empirical evidence that integration of written argumentation into physics problems can potentially improve the conceptual quality of solutions, expand their repertoire of problem solving strategies and show promise for addressing the gender gap in physics. The study suggests further avenues for research in this area and implications for designing and implementing argumentation tasks in introductory college physics.
Solar-powered electrocuting trap for controlling house flies and stable flies (Diptera: Muscidae).
Pickens, L G; Mills, G D
1993-09-01
A portable trap was constructed that was visually attractive to house flies, Musca domestica L., and stable flies, Stomoxys calcitrans (L.), outdoors. The trap was made of a white and yellow pyramid placed on top of a white vertical base that had large cutouts in each side. Attracted flies were killed by means of solar-powered electrocuting grids. Three traps killed an average of 1,360 house flies and 1,190 stable flies per day at a manure dump and were effective in attracting flies under both cool (< 23 degrees C) and warm (> 30 degrees C) temperatures. Both species of flies were most attracted to the eastern side of the trap, but house flies preferred yellow in cool mornings and white in warm afternoons. When air temperatures were > 30 degrees C, both house flies and stable flies went into the shaded base of the trap or into tunnels. Most house flies were killed on the pyramidal top of the trap, whereas most stable flies were killed on the vertical base. Opaque fiberglass tunnels with central electrocuting grids were simpler and cheaper, although less effective, for stable flies.
Zhang, Tan; Chen, Ang
2017-01-01
Based on the job demands-resources model, the study developed and validated an instrument that measures physical education teachers' job demands-resources perception. Expert review established content validity with the average item rating of 3.6/5.0. Construct validity and reliability were determined with a teacher sample ( n = 397). Exploratory factor analysis established a five-dimension construct structure matching the theoretical construct deliberated in the literature. The composite reliability scores for the five dimensions range from .68 to .83. Validity coefficients (intraclass correlational coefficients) are .69 for job resources items and .82 for job demands items. Inter-scale correlational coefficients range from -.32 to .47. Confirmatory factor analysis confirmed the construct validity with high dimensional factor loadings (ranging from .47 to .84 for job resources scale and from .50 to .85 for job demands scale) and adequate model fit indexes (root mean square error of approximation = .06). The instrument provides a tool to measure physical education teachers' perception of their working environment.
Zhang, Tan; Chen, Ang
2017-01-01
Based on the job demands–resources model, the study developed and validated an instrument that measures physical education teachers’ job demands–resources perception. Expert review established content validity with the average item rating of 3.6/5.0. Construct validity and reliability were determined with a teacher sample (n = 397). Exploratory factor analysis established a five-dimension construct structure matching the theoretical construct deliberated in the literature. The composite reliability scores for the five dimensions range from .68 to .83. Validity coefficients (intraclass correlational coefficients) are .69 for job resources items and .82 for job demands items. Inter-scale correlational coefficients range from −.32 to .47. Confirmatory factor analysis confirmed the construct validity with high dimensional factor loadings (ranging from .47 to .84 for job resources scale and from .50 to .85 for job demands scale) and adequate model fit indexes (root mean square error of approximation = .06). The instrument provides a tool to measure physical education teachers’ perception of their working environment. PMID:29200808
Cooper, Rachel; Muniz-Terrera, Graciela; Kuh, Diana
2016-04-18
(1) To describe changes in objective measures of physical capability between ages 53 and 60-64 years; (2) to investigate the associations of behavioural risk factors (obesity, physical inactivity, smoking) and number of health conditions (range 0-4: hand osteoarthritis (OA); knee OA; severe respiratory symptoms; other disabling or life-threatening conditions (ie, cancer, cardiovascular disease, diabetes)) at age 53 years with these changes. Nationally representative prospective birth cohort study. England, Scotland and Wales. Up to 2093 men and women from the Medical Research Council National Survey of Health and Development, who have been followed-up since birth in 1946, and underwent physical capability assessments performed by nurses following standard protocols in 1999 and 2006-2010. Grip strength and chair rise speed were assessed at ages 53 and 60-64 years. Four categories of change in grip strength and chair rise speed were identified: decline, stable high, stable low, a reference group who maintained physical capability within a 'normal' range. Less healthy behavioural risk scores and an increase in the number of health conditions experienced were associated in a stepwise fashion with increased risk of decline in physical capability, and also of having low levels at baseline and remaining low. For example, the sex and mutually adjusted relative-risk ratios (95% CI) of being in the stable low versus reference category of chair rise speed were 1.58 (1.35-1.86) and 1.97 (1.57-2.47) per 1 unit change in behavioural risk score and health indicator count, respectively. These findings provide evidence of the associations of a range of modifiable factors with age-related changes in physical capability. They suggest the need to target multiple risk factors at least as early as mid-life when aiming to promote maintenance and prevent decline in physical capability in later life. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/
Li, Lixuan; Li, Jia
2015-05-01
To study the effects of lentivirus-mediated short hairpin RNA (shRNA) silencing of lysosome-associated membrane protein type 2A (LAMP2A) expression on the proliferation of multiple myeloma cells. The constructed shRNA lentiviral vector was applied to infect human multiple myeloma cell line MM.1S, and stable expression cell line was obtained by puromycin screening. Western blotting was used to verify the inhibitory effect on LAMP2A protein expression. MTT assay was conducted to detect the effect of knocked-down LAMP2A on MM.1S cell proliferation, and the anti-tumor potency of suberoylanilide hydroxamic acid (SAHA) against the obtained MM.1S LAMP2A(shRNA) stable cell line. Lactate assay was performed to observe the impact of low LAMP2A expression on cell glycolysis. The stable cell line with low LAMP2A expression were obtained with the constructed human LAMP2A-shRNA lentiviral vector. Down-regulation of LAMP2A expression significantly inhibited MM.1S cell proliferation and enhanced the anti-tumor activity of SAHA. Interestingly, decreased LAMP2A expression also inhibited MM.1S cell lactic acid secretion. Down-regulation of LAMP2A expression could inhibit cell proliferation in multiple myeloma cells.
A new and compact system at the AMS laboratory in Bucharest
NASA Astrophysics Data System (ADS)
Stan-Sion, C.; Enachescu, M.; Petre, A. R.; Simion, C. A.; Calinescu, C. I.; Ghita, D. G.
2015-10-01
AMS research started more than 15 years ago at our National Institute for Physics and Nuclear Engineering (IFIN-HH), Bucharest. A first facility was constructed based on our multipurpose 9 MV tandem accelerator and was upgraded several times. In May 2012 a new Cockcroft Walton type 1 MV HVEE tandetron AMS system, was commissioned. Two chemistry laboratories were constructed and are routinely performing the target preparation for carbon dating and for other isotope applications such as for geology, environment physics, medicine and forensic physics. Performance parameters of the new system are shown.
26 CFR 1.44-2 - Property to which credit for purchase of new principal residence applies.
Code of Federal Regulations, 2012 CFR
2012-04-01
... apply to a new principal residence which satisfies the following conditions: (a) Construction. The construction of the residence must have begun before March 26, 1975. For this purpose construction is... this paragraph, construction is considered to commence when actual physical work of a significant...
26 CFR 1.44-2 - Property to which credit for purchase of new principal residence applies.
Code of Federal Regulations, 2014 CFR
2014-04-01
... apply to a new principal residence which satisfies the following conditions: (a) Construction. The construction of the residence must have begun before March 26, 1975. For this purpose construction is... this paragraph, construction is considered to commence when actual physical work of a significant...
26 CFR 1.44-2 - Property to which credit for purchase of new principal residence applies.
Code of Federal Regulations, 2013 CFR
2013-04-01
... apply to a new principal residence which satisfies the following conditions: (a) Construction. The construction of the residence must have begun before March 26, 1975. For this purpose construction is... this paragraph, construction is considered to commence when actual physical work of a significant...
PT -symmetric currents of a Bose-Einstein condensate in a triple well
NASA Astrophysics Data System (ADS)
Haag, Daniel; Dast, Dennis; Cartarius, Holger; Wunner, Günter
2015-11-01
We study the case of PT -symmetric perturbations of Hermitian Hamiltonians with degenerate eigenvalues using the example of a triple-well system. The degeneracy complicates the question of whether or not a stationary current through such a system can be established, i.e., whether or not the PT -symmetric states are stable. It is shown that this is only the case for perturbations that do not couple to any of the degenerate states. The physical explanation for the inhibition of stable currents is discussed. However, introducing an on-site interaction restores the capability to support stable currents.
Guo, Chun; Xu, Jianfeng; Wang, Mingnian; Yan, Tao; Yang, Lu; Sun, Zhitao
2015-12-22
The low atmospheric pressure and low oxygen content in high-altitude environment have great impacts on the functions of human body. Especially for the personnel engaged in complicated physical labor such as tunnel construction, high altitude can cause a series of adverse physiological reactions, which may result in multiple high-altitude diseases and even death in severe cases. Artificial oxygen supply is required to ensure health and safety of construction personnel in hypoxic environments. However, there are no provisions for oxygen supply standard for tunnel construction personnel in high-altitude areas in current tunnel construction specifications. As a result, this paper has theoretically studied the impacts of high-altitude environment on human bodies, analyzed the relationship between labor intensity and oxygen consumption in high-altitude areas and determined the critical oxygen-supply altitude values for tunnel construction based on two different standard evaluation systems, i.e., variation of air density and equivalent PIO₂. In addition, it has finally determined the oxygen supply standard for construction personnel in high-altitude areas based on the relationship between construction labor intensity and oxygen consumption.
Perspective: Highly stable vapor-deposited glasses
NASA Astrophysics Data System (ADS)
Ediger, M. D.
2017-12-01
This article describes recent progress in understanding highly stable glasses prepared by physical vapor deposition and provides perspective on further research directions for the field. For a given molecule, vapor-deposited glasses can have higher density and lower enthalpy than any glass that can be prepared by the more traditional route of cooling a liquid, and such glasses also exhibit greatly enhanced kinetic stability. Because vapor-deposited glasses can approach the bottom of the amorphous part of the potential energy landscape, they provide insights into the properties expected for the "ideal glass." Connections between vapor-deposited glasses, liquid-cooled glasses, and deeply supercooled liquids are explored. The generality of stable glass formation for organic molecules is discussed along with the prospects for stable glasses of other types of materials.
ERIC Educational Resources Information Center
Coulter, Maura; Ní Chróinín, Déirdre
2013-01-01
Physical education is a socially constructed activity that forms one component of a wider physical culture that includes sport and health/physical activity. The terms sport and physical education are often used interchangeably in school contexts, where sport and health continue to shape what is understood by the term physical education. This study…
Casas, D.; Ercilla, G.; Estrada, F.; Alonso, B.; Baraza, J.; Lee, H.; Kayen, R.; Chiocci, F.
2004-01-01
Our investigation is centred on the continental slope of the Antarctic Peninsula and adjacent basin. Type of sediments, sedimentary stratigraphy, and physical and geotechnical characterization of the sediments have been integrated. Four different types of sediments have been defined: diamictons, silty and muddy turbidites, muddy, silty and muddy matrix embedded clast contourites. There is a close correspondence between the physical properties (density, magnetic susceptibility and p-wave velocity) and the texture and/or fabric as laminations and stratification. From a quantitative point of view, only a few statistical correlations between textural and physical properties have been found. Within the geotechnical properties, only water content is most influenced by texture. This slope, with a maximum gradient observed (20??), is stable, according to the stability under gravitational loading concepts, and the maximum stable slope that would range from 22?? to 29??. Nevertheless, different instability features have been observed. Volcanic activity, bottom currents, glacial loading-unloading or earthquakes can be considered as potential mechanisms to induce instability in this area. Copyright ?? Taylor & Francis Inc.
Robroek, Suzan J W; Järvholm, Bengt; van der Beek, Allard J; Proper, Karin I; Wahlström, Jens; Burdorf, Alex
2017-09-01
The objectives of this study are to investigate the relation between obesity and labour force exit via diagnosis-specific disability benefits, and whether physical workload modifies this association. A longitudinal analysis was performed among 3 28 743 Swedish construction workers in the age of 15-65 years. Body weight and height were measured at a health examination and enriched with register information on disability benefits up to 37 years later. Diagnoses of disability benefits were categorised into cardiovascular diseases (CVDs), musculoskeletal diseases (MSDs), mental disorders and others. A job exposure matrix, based on self-reported lifting of heavy loads and working in bent forward or twisted position, was applied as a measure of physical workload. Cox proportional hazards regression analyses were performed, and the relative excess risk due to interaction (RERI) between obesity and physical workload was calculated. Obese construction workers were at increased risk of receiving disability benefits (HR 1.70, 95% CI 1.65 to 2.76), mainly through CVD (HR 2.30) and MSD (HR 1.71). Construction workers with a high physical workload were also more likely to receive a disability benefit (HR 2.28, 95% CI 2.21 to 2.34), particularly via MSD (HR 3.02). Obesity in combination with a higher physical workload increased the risk of disability benefits (RERI 0.28) more than the sum of the risks of obesity and higher physical workload, particularly for MSD (RERI 0.44). Obesity and a high physical workload are risk factors for disability benefit. Furthermore, these factors are synergistic risk factors for labour force exit via disability benefit through MSD. Comprehensive programmes that target health promotion to prevent obesity and ergonomic interventions to reduce physical workload are important to facilitate sustained employment. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.
Physical Resilience in Older Adults: Systematic Review and Development of an Emerging Construct.
Whitson, Heather E; Duan-Porter, Wei; Schmader, Kenneth E; Morey, Miriam C; Cohen, Harvey J; Colón-Emeric, Cathleen S
2016-04-01
Resilience has been described in the psychosocial literature as the capacity to maintain or regain well-being during or after adversity. Physical resilience is a newer concept that is highly relevant to successful aging. Our objective was to characterize the emerging construct of resilience as it pertains to physical health in older adults, and to identify gaps and opportunities to advance research in this area. We conducted a systematic review to identify English language papers published through January 2015 that apply the term "resilience" in relation to physical health in older adults. We applied a modified framework analysis to characterize themes in implicit or explicit definitions of physical resilience. Of 1,078 abstracts identified, 49 articles met criteria for inclusion. Sixteen were letters or concept papers, and only one was an intervention study. Definitions of physical resilience spanned cellular to whole-person levels, incorporated many outcome measures, and represented three conceptual themes: resilience as a trait, trajectory, or characteristic/capacity. Current biomedical literature lacks consensus on how to define and measure physical resilience. We propose a working definition of physical resilience at the whole person level: a characteristic which determines one's ability to resist or recover from functional decline following health stressor(s). We present a conceptual framework that encompasses the related construct of physiologic reserve. We discuss gaps and opportunities in measurement, interactions across contributors to physical resilience, and points of intervention. Published by Oxford University Press on behalf of the Gerontological Society of America 2015.
An anthropomorphic phantom for quantitative evaluation of breast MRI.
Freed, Melanie; de Zwart, Jacco A; Loud, Jennifer T; El Khouli, Riham H; Myers, Kyle J; Greene, Mark H; Duyn, Jeff H; Badano, Aldo
2011-02-01
In this study, the authors aim to develop a physical, tissue-mimicking phantom for quantitative evaluation of breast MRI protocols. The objective of this phantom is to address the need for improved standardization in breast MRI and provide a platform for evaluating the influence of image protocol parameters on lesion detection and discrimination. Quantitative comparisons between patient and phantom image properties are presented. The phantom is constructed using a mixture of lard and egg whites, resulting in a random structure with separate adipose- and glandular-mimicking components. T1 and T2 relaxation times of the lard and egg components of the phantom were estimated at 1.5 T from inversion recovery and spin-echo scans, respectively, using maximum-likelihood methods. The image structure was examined quantitatively by calculating and comparing spatial covariance matrices of phantom and patient images. A static, enhancing lesion was introduced by creating a hollow mold with stereolithography and filling it with a gadolinium-doped water solution. Measured phantom relaxation values fall within 2 standard errors of human values from the literature and are reasonably stable over 9 months of testing. Comparison of the covariance matrices of phantom and patient data demonstrates that the phantom and patient data have similar image structure. Their covariance matrices are the same to within error bars in the anterior-posterior direction and to within about two error bars in the right-left direction. The signal from the phantom's adipose-mimicking material can be suppressed using active fat-suppression protocols. A static, enhancing lesion can also be included with the ability to change morphology and contrast agent concentration. The authors have constructed a phantom and demonstrated its ability to mimic human breast images in terms of key physical properties that are relevant to breast MRI. This phantom provides a platform for the optimization and standardization of breast MRI imaging protocols for lesion detection and characterization.
Evaluation of pavement permeability in Mississippi.
DOT National Transportation Integrated Search
2003-07-01
The proper compaction of hot mix asphalt (HMA) pavements is vital for a stable and durable pavement. For dense-graded mixtures, it has been recommended that the initial in-place air voids at the time of construction should not be below 3 percent or a...
Job Prospects for Civil Engineers.
ERIC Educational Resources Information Center
Basta, Nicholas
1985-01-01
Government programs and renewed industrial activity have combined with stable enrollments to create bright job prospects for civil engineers. Areas with good opportunities include highway reconstruction and rehabilitation, water-resource management, and new factory construction. The subspecialty of structural engineering has a growing need in…
ERIC Educational Resources Information Center
Culpan, Ian; Stevens, Susannah
2017-01-01
Attitudes and values (A + V) are an important component of the New Zealand physical education (PE) curriculum. These A + V have a strong synergy with the philosophy of Olympism and New Zealand is recognised as one of the few countries to link these constructs in a national curriculum statement. While these two constructs are linked, little is…
ERIC Educational Resources Information Center
Peiró-Velert, Carmen; Molina-Alventosa, Pere; Kirk, David; Devís-Devís, José
2015-01-01
This paper examines teachers' use of printed curriculum materials (PCM) during physical education (PE) instruction in Spanish secondary schools and the role they play in the enacted curriculum and in the construction of pedagogical knowledge. Three hundred and ten participants (mean age: 37.7 ± 8.7) responded to an interview-questionnaire on…
Structural and robustness properties of smart-city transportation networks
NASA Astrophysics Data System (ADS)
Zhang, Zhen-Gang; Ding, Zhuo; Fan, Jing-Fang; Meng, Jun; Ding, Yi-Min; Ye, Fang-Fu; Chen, Xiao-Song
2015-09-01
The concept of smart city gives an excellent resolution to construct and develop modern cities, and also demands infrastructure construction. How to build a safe, stable, and highly efficient public transportation system becomes an important topic in the process of city construction. In this work, we study the structural and robustness properties of transportation networks and their sub-networks. We introduce a complementary network model to study the relevance and complementarity between bus network and subway network. Our numerical results show that the mutual supplement of networks can improve the network robustness. This conclusion provides a theoretical basis for the construction of public traffic networks, and it also supports reasonable operation of managing smart cities. Project supported by the Major Projects of the China National Social Science Fund (Grant No. 11 & ZD154).
Clarifying the construct of perfectionism
Stairs, Agnes M.; Smith, Gregory T.; Zapolski, Tamika C. B.; Combs, Jessica L.; Settles, Regan E.
2011-01-01
The construct of perfectionism is related to many important outcome variables. However, the term “perfectionism” has been defined in many different ways, and items comprising the different existing scales appear to be very different in content. The overarching aim of the present set of studies was to help clarify the specific unidimensional personality constructs that contribute to perfectionistic behavior. First, trained raters reliably sorted items from existing measures of perfectionism into nine dimensions. An exploratory factor analysis, followed by a confirmatory factor analysis on an independent sample, resulted in a 9 scale, 61 item measure, called the Measure of Constructs Underlying Perfectionism (M-CUP). The nine scales were internally consistent and stable across time, and they were differentially associated with relevant measures of personality in theoretically meaningful ways. PMID:21665884
Correlation of physical and genetic maps of human chromosome 16
DOE Office of Scientific and Technical Information (OSTI.GOV)
Sutherland, G.R.
1991-01-01
This project aimed to divide chromosome 16 into approximately 50 intervals of {approximately}2Mb in size by constructing a series of mouse/human somatic cell hybrids each containing a rearranged chromosome 16. Using these hybrids, DNA probes would be regionally mapped by Southern blot or PCR analysis. Preference would be given to mapping probes which demonstrated polymorphisms for which the CEPH panel of families had been typed. This would allow a correlation of the physical and linkage maps of this chromosome. The aims have been substantially achieved. 49 somatic cell hybrids have been constructed which have allowed definition of 46, and potentiallymore » 57, different physical intervals on the chromosome. 164 loci have been fully mapped into these intervals. A correlation of the physical and genetic maps of the chromosome is in an advanced stage of preparation. The somatic cell hybrids constructed have been widely distributed to groups working on chromosome 16 and other genome projects.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Sutherland, G.R.
1991-12-31
This project aimed to divide chromosome 16 into approximately 50 intervals of {approximately}2Mb in size by constructing a series of mouse/human somatic cell hybrids each containing a rearranged chromosome 16. Using these hybrids, DNA probes would be regionally mapped by Southern blot or PCR analysis. Preference would be given to mapping probes which demonstrated polymorphisms for which the CEPH panel of families had been typed. This would allow a correlation of the physical and linkage maps of this chromosome. The aims have been substantially achieved. 49 somatic cell hybrids have been constructed which have allowed definition of 46, and potentiallymore » 57, different physical intervals on the chromosome. 164 loci have been fully mapped into these intervals. A correlation of the physical and genetic maps of the chromosome is in an advanced stage of preparation. The somatic cell hybrids constructed have been widely distributed to groups working on chromosome 16 and other genome projects.« less
Tovsen, Marianne Lilletvedt; Smistad, Gro; Bjerke, Trude Marie; Tønnesen, Hanne Hjorth; Kristensen, Solveig
2015-01-01
Commercially available parenteral emulsions (n = 4) and admixtures for parenteral nutrition (n = 2) were exposed to UVA and visible irradiation (320-800 nm) at standardized, validated conditions according to the ICH Guideline Q1B (Option 1, to an endpoint corresponding to 1.2 × 10(6) lux h in the range 400-800 nm). Physical stability was evaluated as changes in emulsion droplet size measured by photon correlation spectroscopy, and emulsion droplet zeta potential measured by micro-electrophoresis. Chemical stability was evaluated by detection of lipid peroxidation according to the thiobarbituric acid test and changes in pH. The results are valid for samples stored up to 24 h after exposure. The preparations remained physically stable, even though exposed to UVA (489 W h/m(2)) and visible radiation (1.2 × 10(6) lux h) that correspond to as much as 2-4 days exposure on a sunny window sill. This was the case also when vitamins and trace metals were added. Spiking of the samples with the highly efficient photosensitizer 5-hydroxymethyl furfural (5-HMF), a thermal degradation product of glucose commonly present in steam-sterilized glucose infusions, did not reduce physical stability. Hence, the lipid peroxidation and changes in pH and color induced by irradiation of certain preparations did obviously not influence their physical stability. Parenteral preparations are commonly exposed to optical radiation during storage and administration. Exposure to visible light and UVA radiation indoors, or additionally UVB radiation outdoors, may lead to degradation of active pharmaceutical ingredients and drug formulations. Clear plastic and glass containers commonly used for parenteral preparations do not protect the contents from exposure to radiation, even in the UVB region. The investigated parenteral emulsions and admixtures of emulsions, glucose, and amino acids are physically stable during exposure to optical radiation corresponding to indoor conditions (i.e., glass-filtered daylight). They can be considered physically stable under normal in-use conditions. © PDA, Inc. 2015.
The role of logistic constraints in termite construction of chambers and tunnels.
Ladley, Dan; Bullock, Seth
2005-06-21
In previous models of the building behaviour of termites, physical and logistic constraints that limit the movement of termites and pheromones have been neglected. Here, we present an individual-based model of termite construction that includes idealized constraints on the diffusion of pheromones, the movement of termites, and the integrity of the architecture that they construct. The model allows us to explore the extent to which the results of previous idealized models (typically realised in one or two dimensions via a set of coupled partial differential equations) generalize to a physical, 3-D environment. Moreover we are able to investigate new processes and architectures that rely upon these features. We explore the role of stigmergic recruitment in pillar formation, wall building, and the construction of royal chambers, tunnels and intersections. In addition, for the first time, we demonstrate the way in which the physicality of partially built structures can help termites to achieve efficient tunnel structures and to establish and maintain entrances in royal chambers. As such we show that, in at least some cases, logistic constraints can be important or even necessary in order for termites to achieve efficient, effective constructions.
Engineered Human Antibody Constant Domains with Increased Stability*S⃞
Gong, Rui; Vu, Bang K.; Feng, Yang; Prieto, DaRue A.; Dyba, Marzena A.; Walsh, Joseph D.; Prabakaran, Ponraj; Veenstra, Timothy D.; Tarasov, Sergey G.; Ishima, Rieko; Dimitrov, Dimiter S.
2009-01-01
The immunoglobulin (Ig) constant CH2 domain is critical for antibody effector functions. Isolated CH2 domains are promising as scaffolds for construction of libraries containing diverse binders that could also confer some effector functions. However, previous work has shown that an isolated murine CH2 domain is relatively unstable to thermally induced unfolding. To explore unfolding mechanisms of isolated human CH2 and increase its stability γ1 CH2 was cloned and a panel of cysteine mutants was constructed. Human γ1 CH2 unfolded at a higher temperature (Tm = 54.1 °C, as measured by circular dichroism) than that previously reported for a mouse CH2 (41 °C). One mutant (m01) was remarkably stable (Tm = 73.8 °C). Similar results were obtained by differential scanning calorimetry. This mutant was also significantly more stable than the wild-type CH2 against urea induced unfolding (50% unfolding at urea concentration of 6.8 m versus 4.2 m). The m01 was highly soluble and monomeric. The existence of the second disulfide bond in m01 and its correct position were demonstrated by mass spectrometry and nuclear magnetic resonance spectroscopy, respectively. The loops were on average more flexible than the framework in both CH2 and m01, and the overall secondary structure was not affected by the additional disulfide bond. These data suggest that a human CH2 domain is relatively stable to unfolding at physiological temperature, and that both CH2 and the highly stable mutant m01 are promising new scaffolds for the development of therapeutics against human diseases. PMID:19307178
Analytic modified embedded atom potentials for HCP metals
NASA Astrophysics Data System (ADS)
Hu, Wangyu; Zhang, Bangwei; Huang, Baiyun; Gao, Fei; Bacon, David J.
2001-02-01
Analytic modified embedded atom method (AMEAM) type many-body potentials have been constructed for ten hcp metals: Be, Co, Hf, Mg, Re, Ru, Sc, Ti, Y and Zr. The potentials are parametrized using analytic functions and fitted to the cohesive energy, unrelaxed vacancy formation energy, five independent second-order elastic constants and two equilibrium conditions. Hence, each of the constructed potentials represents a stable hexagonal close-packed lattice with a particular non-ideal c/a ratio. In order to treat the metals with negative Cauchy pressure, a modified term has been added to the total energy. For all the metals considered, the hcp lattice is shown to be energetically most stable when compared with the fcc and bcc structure and the hcp lattice with ideal c/a. The activation energy for vacancy diffusion in these metals has been calculated. They agree well with experimental data available and those calculated by other authors for both monovacancy and divacancy mechanisms and the most possible diffusion paths are predicted. Stacking fault and surface energy have also been calculated and their values are lower than typical experimental data. Finally, the self-interstitial atom (SIA) formation energy and volume have been evaluated for eight possible sites. This calculation suggests that the basal split or crowdion is the most stable configuration for metals with a rather large deviation from the ideal c/a value and the non-basal dumbbell (C or S) is the most stable configuration for metals with c/a near ideal. The relationship between SIA formation energy and melting temperature roughly obeys a linear relation for most metals except Ru and Re.
Birkeland, Marianne Skogbrott; Knatten, Charlotte Kristensen; Hansen, Marianne Bang; Hem, Camilla; Heir, Trond
2016-09-15
After traumatic events, social support and posttraumatic stress are interrelated, but little is known about the underlying dynamics behind this association. Levels of social support and posttraumatic stress may change and affect each other over time, but there are also stable time-invariant individual differences in both constructs. The present study aimed to determine the amount of variance explained by stable individual differences in levels of social support and posttraumatic stress across three years, and to determine whether and to what extent social support and posttraumatic stress may affect one another when these stable individual differences are controlled for. We used data from ministerial employees present in the Governmental district during the 2011 Oslo bombing attack (N=255). Data was collected ten months, two years, and three years after the terror attack. Using a random intercept cross lagged panel model (RI-CLPM), we tested the possible directional effects between social support and posttraumatic stress within persons when variance between persons was taken into account. The intraclass correlations of the three measures of posttraumatic stress and social support were.83 and.74, respectively. The remaining variation within persons could not be explained by change in either of these constructs. We have no information on the processes that might have occurred before 10 months after the incident. Our findings indicate that the long-term longitudinal linkage between social support and posttraumatic stress may be best explained by stable individual differences rather than causal processes operating within persons. Copyright © 2016 Elsevier B.V. All rights reserved.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Zhou, Peijie, E-mail: cliffzhou@pku.edu.cn; Li, Tiejun, E-mail: tieli@pku.edu.cn
Motivated by the famous Waddington’s epigenetic landscape metaphor in developmental biology, biophysicists and applied mathematicians made different proposals to construct the landscape for multi-stable complex systems. We aim to summarize and elucidate the relationships among these theories from a mathematical point of view. We systematically investigate and compare three different but closely related realizations in the recent literature: the Wang’s potential landscape theory from steady state distribution of stochastic differential equations (SDEs), the Freidlin-Wentzell quasi-potential from the large deviation theory, and the construction through SDE decomposition and A-type integral. We revisit that the quasi-potential is the zero noise limit ofmore » the potential landscape, and the potential function in the third proposal coincides with the quasi-potential. We compare the difference between local and global quasi-potential through the viewpoint of exchange of limit order for time and noise amplitude. We argue that local quasi-potentials are responsible for getting transition rates between neighboring stable states, while the global quasi-potential mainly characterizes the residence time of the states as the system reaches stationarity. The difference between these two is prominent when the transitivity property is broken. The most probable transition path by minimizing the Onsager-Machlup or Freidlin-Wentzell action functional is also discussed. As a consequence of the established connections among different proposals, we arrive at the novel result which guarantees the existence of SDE decomposition while denies its uniqueness in general cases. It is, therefore, clarified that the A-type integral is more appropriate to be applied to the decomposed SDEs rather than its primitive form as believed by previous researchers. Our results contribute to a deeper understanding of landscape theories for biological systems.« less
Capturing Parenting as a Multidimensional and Dynamic Construct with a Person-Oriented Approach.
Zheng, Yao; Pasalich, Dave S; Oberth, Carla; McMahon, Robert J; Pinderhughes, Ellen E
2017-04-01
Although parenting is one of the most commonly studied predictors of child problem behavior, few studies have examined parenting as a multidimensional and dynamic construct. This study investigated different patterns of developmental trajectories of two parenting dimensions (harsh discipline [HD] and parental warmth [PW]) with a person-oriented approach and examined the associations between different parenting patterns and child externalizing problems and callous-unemotional traits. Data were drawn from the combined high-risk control and normative sample (n = 753) of the Fast Track Project. Parent-reported HD and observer-reported PW from kindergarten to grade 2 were fit to growth mixture models. Two subgroups were identified for HD (low decreasing, 83.0 %; high stable, 17.0 %) and PW (high increasing, 78.7 %; low increasing, 21.3 %). The majority of parents (67.0 %) demonstrated the low decreasing HD and high increasing PW pattern, while the prevalence of the high stable HD and low increasing PW pattern was the lowest (6.8 %). Parenting satisfaction, parental depression, family socioeconomic status, and neighborhood safety predicted group memberships jointly defined by the two dimensions. Children from the high stable HD and low increasing PW pattern showed the highest levels of externalizing problems in grades 4 and 5. Children from the low decreasing HD and low increasing PW pattern showed the highest levels of callous-unemotional traits in grade 7. These findings demonstrate the utility and significance of a person-oriented approach to measuring parenting as a multidimensional and dynamic construct and reveal the interplay between HD and PW in terms of their influences on child developmental outcomes.
NASA Astrophysics Data System (ADS)
Zhou, Peijie; Li, Tiejun
2016-03-01
Motivated by the famous Waddington's epigenetic landscape metaphor in developmental biology, biophysicists and applied mathematicians made different proposals to construct the landscape for multi-stable complex systems. We aim to summarize and elucidate the relationships among these theories from a mathematical point of view. We systematically investigate and compare three different but closely related realizations in the recent literature: the Wang's potential landscape theory from steady state distribution of stochastic differential equations (SDEs), the Freidlin-Wentzell quasi-potential from the large deviation theory, and the construction through SDE decomposition and A-type integral. We revisit that the quasi-potential is the zero noise limit of the potential landscape, and the potential function in the third proposal coincides with the quasi-potential. We compare the difference between local and global quasi-potential through the viewpoint of exchange of limit order for time and noise amplitude. We argue that local quasi-potentials are responsible for getting transition rates between neighboring stable states, while the global quasi-potential mainly characterizes the residence time of the states as the system reaches stationarity. The difference between these two is prominent when the transitivity property is broken. The most probable transition path by minimizing the Onsager-Machlup or Freidlin-Wentzell action functional is also discussed. As a consequence of the established connections among different proposals, we arrive at the novel result which guarantees the existence of SDE decomposition while denies its uniqueness in general cases. It is, therefore, clarified that the A-type integral is more appropriate to be applied to the decomposed SDEs rather than its primitive form as believed by previous researchers. Our results contribute to a deeper understanding of landscape theories for biological systems.
Windolf, Markus; Klos, Kajetan; Wähnert, Dirk; van der Pol, Bas; Radtke, Roman; Schwieger, Karsten; Jakob, Roland P
2010-05-21
Angle-stable locking plates have improved the surgical management of fractures. However, locking implants are costly and removal can be difficult. The aim of this in vitro study was to evaluate the biomechanical performance of a newly proposed crossed-screw concept ("Fence") utilizing conventional (non-locked) implants in comparison to conventional LC-DCP (limited contact dynamic compression plate) and LCP (locking compression plate) stabilization, in a human cadaveric diaphyseal gap model. In eight pairs of human cadaveric femora, one femur per pair was randomly assigned to receive a Fence construct with either elevated or non-elevated plate, while the contralateral femur received either an LCP or LC-DCP instrumentation. Fracture gap motion and fatigue performance under cyclic loading was evaluated successively in axial compression and in torsion. Results were statistically compared in a pairwise setting. The elevated Fence constructs allowed significantly higher gap motion compared to the LCP instrumentations (axial compression: p
Robust operative diagnosis as problem solving in a hypothesis space
NASA Technical Reports Server (NTRS)
Abbott, Kathy H.
1988-01-01
This paper describes an approach that formulates diagnosis of physical systems in operation as problem solving in a hypothesis space. Such a formulation increases robustness by: (1) incremental hypotheses construction via dynamic inputs, (2) reasoning at a higher level of abstraction to construct hypotheses, and (3) partitioning the space by grouping fault hypotheses according to the type of physical system representation and problem solving techniques used in their construction. It was implemented for a turbofan engine and hydraulic subsystem. Evaluation of the implementation on eight actual aircraft accident cases involving engine faults provided very promising results.
Utility of pedometers for assessing physical activity: construct validity.
Tudor-Locke, Catrine; Williams, Joel E; Reis, Jared P; Pluto, Delores
2004-01-01
Valid assessment of physical activity is necessary to fully understand this important health-related behaviour for research, surveillance, intervention and evaluation purposes. This article is the second in a companion set exploring the validity of pedometer-assessed physical activity. The previous article published in Sports Medicine dealt with convergent validity (i.e. the extent to which an instrument's output is associated with that of other instruments intended to measure the same exposure of interest). The present focus is on construct validity. Construct validity is the extent to which the measurement corresponds with other measures of theoretically-related parameters. Construct validity is typically evaluated by correlational analysis, that is, the magnitude of concordance between two measures (e.g. pedometer-determined steps/day and a theoretically-related parameter such as age, anthropometric measures and fitness). A systematic literature review produced 29 articles published since > or =1980 directly relevant to construct validity of pedometers in relation to age, anthropometric measures and fitness. Reported correlations were combined and a median r-value was computed. Overall, there was a weak inverse relationship (median r = -0.21) between age and pedometer-determined physical activity. A weak inverse relationship was also apparent with both body mass index and percentage overweight (median r = -0.27 and r = -0.22, respectively). Positive relationships regarding indicators of fitness ranged from weak to moderate depending on the fitness measure utilised: 6-minute walk test (median r = 0.69), timed treadmill test (median r = 0.41) and estimated maximum oxygen uptake (median r = 0.22). Studies are warranted to assess the relationship of pedometer-determined physical activity with other important health-related outcomes including blood pressure and physiological parameters such as blood glucose and lipid profiles. The aggregated evidence of convergent validity (presented in the previous companion article) and construct validity herein provides support for considering simple and inexpensive pedometers in both research and practice.
Hoyer, Erik H; Young, Daniel L; Klein, Lisa M; Kreif, Julie; Shumock, Kara; Hiser, Stephanie; Friedman, Michael; Lavezza, Annette; Jette, Alan; Chan, Kitty S; Needham, Dale M
2018-02-01
The lack of common language among interprofessional inpatient clinical teams is an important barrier to achieving inpatient mobilization. In The Johns Hopkins Hospital, the Activity Measure for Post-Acute Care (AM-PAC) Inpatient Mobility Short Form (IMSF), also called "6-Clicks," and the Johns Hopkins Highest Level of Mobility (JH-HLM) are part of routine clinical practice. The measurement characteristics of these tools when used by both nurses and physical therapists for interprofessional communication or assessment are unknown. The purposes of this study were to evaluate the reliability and minimal detectable change of AM-PAC IMSF and JH-HLM when completed by nurses and physical therapists and to evaluate the construct validity of both measures when used by nurses. A prospective evaluation of a convenience sample was used. The test-retest reliability and the interrater reliability of AM-PAC IMSF and JH-HLM for inpatients in the neuroscience department (n = 118) of an academic medical center were evaluated. Each participant was independently scored twice by a team of 2 nurses and 1 physical therapist; a total of 4 physical therapists and 8 nurses participated in reliability testing. In a separate inpatient study protocol (n = 69), construct validity was evaluated via an assessment of convergent validity with other measures of function (grip strength, Katz Activities of Daily Living Scale, 2-minute walk test, 5-times sit-to-stand test) used by 5 nurses. The test-retest reliability values (intraclass correlation coefficients) for physical therapists and nurses were 0.91 and 0.97, respectively, for AM-PAC IMSF and 0.94 and 0.95, respectively, for JH-HLM. The interrater reliability values (intraclass correlation coefficients) between physical therapists and nurses were 0.96 for AM-PAC IMSF and 0.99 for JH-HLM. Construct validity (Spearman correlations) ranged from 0.25 between JH-HLM and right-hand grip strength to 0.80 between AM-PAC IMSF and the Katz Activities of Daily Living Scale. The results were obtained from inpatients in the neuroscience department of a single hospital. The AM-PAC IMSF and JH-HLM had excellent interrater reliability and test-retest reliability for both physical therapists and nurses. The evaluation of convergent validity suggested that AM-PAC IMSF and JH-HLM measured constructs of patient mobility and physical functioning. © 2017 American Physical Therapy Association
The effects of elevated highway construction on water quality in Louisiana wetlands : final report.
DOT National Transportation Integrated Search
1981-02-02
This study is to determined by physical, chemical, and biological means, the effects of bridged highway construction techniques on water quality in wetlands. Water quality was monitored before, during, and after construction. The data shows the incre...
Kosma, Maria; Ellis, Rebecca; Cardinal, Bradley J; Bauer, Jeremy J; McCubbin, Jeffrey A
2009-04-01
People with disabilities report lower physical activity (PA) and health-related quality of life (HRQOL) levels than people without disabilities. Therefore, it is important to identify factors that motivate individuals with disabilities to be physically active and thus increase their HRQOL. The purpose of the study was to prospectively explore the effects of past theory of planned behavior (TPB) constructs on future (6-month) HRQOL (physical and mental health) through past stages of change (SOC) and future (6-month) PA among adults with physical disabilities. Two models were tested whereby the SOC and PA served as the mediators between the TPB constructs, physical health (PH-Model), and mental health (MH-Model). It was hypothesized that both models would fit the sample data. Participants were 141 adults with physical disabilities (mean age = 46.04, females = 70.9%). The online survey was completed at two different time periods. First, the TPB constructs and SOC were assessed using self-report standardized questionnaires. Six months later, participants completed standardized self-report scales about their PA and HRQOL levels. Using LISREL 8, two path analyses were conducted to examine the two study models (PH-Model and MH-Model). Based on the two path analyses, attitude had the highest effect on SOC followed by perceived behavioral control within both well-fit models. The PH-Model explained more variance in PA (26%) and physical health (55%) than the MH-Model. Health promoters should reinforce both positive intentions and behavioral experiences to increase PA and HRQOL among adults with physical disabilities.
Thomson, Jessica L; Tussing-Humphreys, Lisa M; Zoellner, Jamie M; Goodman, Melissa H
2016-08-01
Evaluating an intervention's theoretical basis can inform design modifications to produce more effective interventions. Hence the present study's purpose was to determine if effects from a multicomponent lifestyle intervention were mediated by changes in the psychosocial constructs decisional balance, self-efficacy and social support. Delta Body and Soul III, conducted from August 2011 to May 2012, was a 6-month, church-based, lifestyle intervention designed to improve diet quality and increase physical activity. Primary outcomes, diet quality and aerobic and strength/flexibility physical activity, as well as psychosocial constructs, were assessed via self-report, interviewer-administered surveys at baseline and post intervention. Mediation analyses were conducted using ordinary least squares (continuous outcomes) and maximum likelihood logistic (dichotomous outcomes) regression path analysis. Churches (five intervention and three control) were recruited from four counties in the Lower Mississippi Delta region of the USA. Rural, Southern, primarily African-American adults (n 321). Based upon results from the multiple mediation models, there was no evidence that treatment (intervention v. control) indirectly influenced changes in diet quality or physical activity through its effects on decisional balance, self-efficacy and social support. However, there was evidence for direct effects of social support for exercise on physical activity and of self-efficacy for sugar-sweetened beverages on diet quality. Results do not support the hypothesis that the psychosocial constructs decisional balance, self-efficacy and social support were the theoretical mechanisms by which the Delta Body and Soul III intervention influenced changes in diet quality and physical activity.
42 CFR 485.723 - Condition of participation: Physical environment.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 42 Public Health 5 2012-10-01 2012-10-01 false Condition of participation: Physical environment... Providers of Outpatient Physical Therapy and Speech-Language Pathology Services § 485.723 Condition of participation: Physical environment. The building housing the organization is constructed, equipped, and...
42 CFR 485.723 - Condition of participation: Physical environment.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 42 Public Health 5 2011-10-01 2011-10-01 false Condition of participation: Physical environment... Providers of Outpatient Physical Therapy and Speech-Language Pathology Services § 485.723 Condition of participation: Physical environment. The building housing the organization is constructed, equipped, and...
42 CFR 485.723 - Condition of participation: Physical environment.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 42 Public Health 5 2014-10-01 2014-10-01 false Condition of participation: Physical environment... Providers of Outpatient Physical Therapy and Speech-Language Pathology Services § 485.723 Condition of participation: Physical environment. The building housing the organization is constructed, equipped, and...
42 CFR 485.723 - Condition of participation: Physical environment.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 42 Public Health 5 2013-10-01 2013-10-01 false Condition of participation: Physical environment... Providers of Outpatient Physical Therapy and Speech-Language Pathology Services § 485.723 Condition of participation: Physical environment. The building housing the organization is constructed, equipped, and...
Oude Hengel, Karen M; Blatter, Brigitte M; van der Molen, Henk F; Bongers, Paulien M; van der Beek, Allard J
2013-09-01
This study aimed to investigate the effectiveness of a prevention program on work ability, health, and sick leave targeted at construction worksites. A total of 15 departments (N = 297 workers) from 6 construction companies participated in this cluster randomized controlled trial and were randomly allocated to the intervention (8 departments; N = 171 workers) or control (7 departments; N = 122 workers) group. The intervention consisted of two individual training sessions with a physical therapist aimed at lowering the physical workload, a rest-break tool to improve the balance between work and recovery, and two empowerment training sessions to increase the worker's influence at the worksite. Data on work ability, physical and mental health status, and musculoskeletal symptoms were collected at baseline, and at 3, 6, and 12 months follow-up. Sick leave data were obtained from the companies. Overall, no differences in work ability [β 0.02, 95% confidence interval (95% CI) -0.34-0.37] or physical and mental health status (β -0.04, 95% CI -1.43-1.35, and β 0.80 95% CI -0.51-2.11, respectively) were found between the intervention and control group. The intervention showed an overall decline in musculoskeletal symptoms (ranging from OR 0.68, 95% CI 0.34-1.33, to OR 0.86, 95% CI 0.47-1.57) and long-term sick leave (OR 0.44, 95% CI 0.13-1.26) among construction workers. Both reductions were not statistically significant. The prevention program seemed to result in a beneficial but not statistically significant decline in the prevalence of musculoskeletal symptoms and long-term sick leave among construction workers, but showed no effects with regard to work ability, physical health, and mental health.
Graph modeling systems and methods
Neergaard, Mike
2015-10-13
An apparatus and a method for vulnerability and reliability modeling are provided. The method generally includes constructing a graph model of a physical network using a computer, the graph model including a plurality of terminating vertices to represent nodes in the physical network, a plurality of edges to represent transmission paths in the physical network, and a non-terminating vertex to represent a non-nodal vulnerability along a transmission path in the physical network. The method additionally includes evaluating the vulnerability and reliability of the physical network using the constructed graph model, wherein the vulnerability and reliability evaluation includes a determination of whether each terminating and non-terminating vertex represents a critical point of failure. The method can be utilized to evaluate wide variety of networks, including power grid infrastructures, communication network topologies, and fluid distribution systems.
An assessment of schoolyard renovation strategies to encourage children's physical activity
2011-01-01
Background Children in poor and minority neighborhoods often lack adequate environmental support for healthy physical development and community interventions designed to improve physical activity resources serve as an important approach to addressing obesity. In Denver, the Learning Landscapes (LL) program has constructed over 98 culturally-tailored schoolyard play spaces at elementary schools with the goal to encourage utilization of play spaces and physical activity. In spite of enthusiasm about such projects to improve urban environments, little work has evaluated their impact or success in achieving their stated objectives. This study evaluates the impacts of LL construction and recency of renovation on schoolyard utilization and the physical activity rates of children, both during and outside of school, using an observational study design. Methods This study employs a quantitative method for evaluating levels of physical activity of individuals and associated environmental characteristics in play and leisure environments. Schools were selected on the basis of their participation in the LL program, the recency of schoolyard renovation, the size of the school, and the social and demographic characteristics of the school population. Activity in the schoolyards was measured using the System for Observing Play and Leisure Activity (SOPLAY), a validated quantitative method for evaluating levels of physical activity of individuals in play and leisure environments. Trained observers collected measurements before school, during school recess, after school, and on weekends. Overall utilization (the total number of children observed on the grounds) and the rate of activity (the percentage of children observed who were physically active) were analyzed. Observations were compared using t-tests and the data were stratified by gender for further analysis. In order to assess the impacts of LL renovation, recently-constructed LL schoolyards were compared to LL schoolyards with older construction, as well as un-renovated schoolyards. Results Overall utilization was significantly higher at LL schools than at un-renovated schools for most observation periods. Notably, LL renovation had no impact on girl's utilization on the weekends, although differences were observed for all other periods. There were no differences in rates of activity for any comparison. With the exception of the number of boys observed, there was no statistically significant difference in activity when recently-constructed LL schools are compared to LL schools with older construction dates and there was no difference observed in comparisons of older LL with unrenovated sites. Conclusions While we observed greater utilization and physical activity in schools with LL, the impact of specific features of LL renovation is not clear. However, schoolyard renovation and programs to encourage schoolyard use before and after school may offer a means to encourage greater physical activity among children, and girls in particular. Additional study of schoolyard renovation may shed light on the specific reasons for these findings or suggest effective policies to improve the physical activity resources of poor and minority neighborhoods. PMID:21477325
Topological quantum computation of the Dold-Thom functor
NASA Astrophysics Data System (ADS)
Ospina, Juan
2014-05-01
A possible topological quantum computation of the Dold-Thom functor is presented. The method that will be used is the following: a) Certain 1+1-topological quantum field theories valued in symmetric bimonoidal categories are converted into stable homotopical data, using a machinery recently introduced by Elmendorf and Mandell; b) we exploit, in this framework, two recent results (independent of each other) on refinements of Khovanov homology: our refinement into a module over the connective k-theory spectrum and a stronger result by Lipshitz and Sarkar refining Khovanov homology into a stable homotopy type; c) starting from the Khovanov homotopy the Dold-Thom functor is constructed; d) the full construction is formulated as a topological quantum algorithm. It is conjectured that the Jones polynomial can be described as the analytical index of certain Dirac operator defined in the context of the Khovanov homotopy using the Dold-Thom functor. As a line for future research is interesting to study the corresponding supersymmetric model for which the Khovanov-Dirac operator plays the role of a supercharge.
Li, Xianran; Tian, Feng; Huang, Haiyan; Tan, Lubin; Zhu, Zuofeng; Hu, Songnian; Sun, Chuanqing
2008-06-01
To facilitate cloning gene(s) underlying gpa7, a deep-coverage BAC library was constructed for an isolate of common wild rice (Oryza rufipogon Griff.) collected from Dongxiang, Jiangxi Province, China (DXCWR). gpa7, a quantitative trait locus corresponding to grain number per panicle, is positioned in the short arm of chromosome 7. The BAC library containing 96,768 clones represents approximate 18 haploid genome equivalents. The contig spanning DXCWR gpa7 was constructed with a series of ordered markers. The putative physical map near the gpa7 locus of another accession of O. rufipogon (Accession: IRGC 105491) was also isolated in silico. Analysis of the physical maps of gpa7 indicated that a segment of about 150 kb was deleted during domestication of common wild rice.
Direct single-molecule dynamic detection of chemical reactions.
Guan, Jianxin; Jia, Chuancheng; Li, Yanwei; Liu, Zitong; Wang, Jinying; Yang, Zhongyue; Gu, Chunhui; Su, Dingkai; Houk, Kendall N; Zhang, Deqing; Guo, Xuefeng
2018-02-01
Single-molecule detection can reveal time trajectories and reaction pathways of individual intermediates/transition states in chemical reactions and biological processes, which is of fundamental importance to elucidate their intrinsic mechanisms. We present a reliable, label-free single-molecule approach that allows us to directly explore the dynamic process of basic chemical reactions at the single-event level by using stable graphene-molecule single-molecule junctions. These junctions are constructed by covalently connecting a single molecule with a 9-fluorenone center to nanogapped graphene electrodes. For the first time, real-time single-molecule electrical measurements unambiguously show reproducible large-amplitude two-level fluctuations that are highly dependent on solvent environments in a nucleophilic addition reaction of hydroxylamine to a carbonyl group. Both theoretical simulations and ensemble experiments prove that this observation originates from the reversible transition between the reactant and a new intermediate state within a time scale of a few microseconds. These investigations open up a new route that is able to be immediately applied to probe fast single-molecule physics or biophysics with high time resolution, making an important contribution to broad fields beyond reaction chemistry.
Bassino, Jean-Pascal; Coclanis, Peter A
2008-07-01
Did economic development result in an improvement in biological welfare in the tropics before the diffusion of modern public health techniques in the 1950s and 1960s? Between the mid-19th and early 20th century, Lower Burma experienced a rapid rise in population and became increasingly commercialized as a major rice exporter. Land reclamation on a massive scale in the Irrawaddy delta required an arduous process of jungle clearance, land drainage and preparation, and canal and bund construction, mostly in malarial swamps. Once paddy lands were created, rice was grown with rudimentary tools in malarial zones. By contrast, in most parts of Upper Burma the economy remained more subsistence-oriented, and less commercialized. In this paper, we investigate changes in physical stature by processing and analyzing data reported in two anthropometric surveys conducted in various regions of Upper and Lower Burma in 1904 and in 1938-1941. An inverted U curve is observed in the evolution of average height in Lower Burma, while stature remained fairly stable in Upper Burma until the 1930s.
How Volatilities Nonlocal in Time Affect the Price Dynamics in Complex Financial Systems
Tan, Lei; Zheng, Bo; Chen, Jun-Jie; Jiang, Xiong-Fei
2015-01-01
What is the dominating mechanism of the price dynamics in financial systems is of great interest to scientists. The problem whether and how volatilities affect the price movement draws much attention. Although many efforts have been made, it remains challenging. Physicists usually apply the concepts and methods in statistical physics, such as temporal correlation functions, to study financial dynamics. However, the usual volatility-return correlation function, which is local in time, typically fluctuates around zero. Here we construct dynamic observables nonlocal in time to explore the volatility-return correlation, based on the empirical data of hundreds of individual stocks and 25 stock market indices in different countries. Strikingly, the correlation is discovered to be non-zero, with an amplitude of a few percent and a duration of over two weeks. This result provides compelling evidence that past volatilities nonlocal in time affect future returns. Further, we introduce an agent-based model with a novel mechanism, that is, the asymmetric trading preference in volatile and stable markets, to understand the microscopic origin of the volatility-return correlation nonlocal in time. PMID:25723154
Solution of the equations for one-dimensional, two-phase, immiscible flow by geometric methods
NASA Astrophysics Data System (ADS)
Boronin, Ivan; Shevlyakov, Andrey
2018-03-01
Buckley-Leverett equations describe non viscous, immiscible, two-phase filtration, which is often of interest in modelling of oil production. For many parameters and initial conditions, the solutions of these equations exhibit non-smooth behaviour, namely discontinuities in form of shock waves. In this paper we obtain a novel method for the solution of Buckley-Leverett equations, which is based on geometry of differential equations. This method is fast, accurate, stable, and describes non-smooth phenomena. The main idea of the method is that classic discontinuous solutions correspond to the continuous surfaces in the space of jets - the so-called multi-valued solutions (Bocharov et al., Symmetries and conservation laws for differential equations of mathematical physics. American Mathematical Society, Providence, 1998). A mapping of multi-valued solutions from the jet space onto the plane of the independent variables is constructed. This mapping is not one-to-one, and its singular points form a curve on the plane of the independent variables, which is called the caustic. The real shock occurs at the points close to the caustic and is determined by the Rankine-Hugoniot conditions.
Zhang, Bo; Edwards, Brian J
2015-06-07
A combination of self-consistent field theory and density functional theory was used to examine the effect of particle size on the stable, 3-dimensional equilibrium morphologies formed by diblock copolymers with a tethered nanoparticle attached either between the two blocks or at the end of one of the blocks. Particle size was varied between one and four tenths of the radius of gyration of the diblock polymer chain for neutral particles as well as those either favoring or disfavoring segments of the copolymer blocks. Phase diagrams were constructed and analyzed in terms of thermodynamic diagrams to understand the physics associated with the molecular-level self-assembly processes. Typical morphologies were observed, such as lamellar, spheroidal, cylindrical, gyroidal, and perforated lamellar, with the primary concentration region of the tethered particles being influenced heavily by particle size and tethering location, strength of the particle-segment energetic interactions, chain length, and copolymer radius of gyration. The effect of the simulation box size on the observed morphology and system thermodynamics was also investigated, indicating possible effects of confinement upon the system self-assembly processes.
NASA Astrophysics Data System (ADS)
Ilhan, Z.; Wehner, W. P.; Schuster, E.; Boyer, M. D.; Gates, D. A.; Gerhardt, S.; Menard, J.
2015-11-01
Active control of the toroidal current density profile is crucial to achieve and maintain high-performance, MHD-stable plasma operation in NSTX-U. A first-principles-driven, control-oriented model describing the temporal evolution of the current profile has been proposed earlier by combining the magnetic diffusion equation with empirical correlations obtained at NSTX-U for the electron density, electron temperature, and non-inductive current drives. A feedforward + feedback control scheme for the requlation of the current profile is constructed by embedding the proposed nonlinear, physics-based model into the control design process. Firstly, nonlinear optimization techniques are used to design feedforward actuator trajectories that steer the plasma to a desired operating state with the objective of supporting the traditional trial-and-error experimental process of advanced scenario planning. Secondly, a feedback control algorithm to track a desired current profile evolution is developed with the goal of adding robustness to the overall control scheme. The effectiveness of the combined feedforward + feedback control algorithm for current profile regulation is tested in predictive simulations carried out in TRANSP. Supported by PPPL.
Nuclear Structure Studies with Stable and Radioactive Beams: The SPES radioactive ion beam project
NASA Astrophysics Data System (ADS)
de Angelis, G.; SPES Collaboration; Prete, G.; Andrighetto, A.; Manzolaro, M.; Corradetti, S.; Scarpa, D.; Rossignoli, M.; Monetti, A.; Lollo, M.; Calderolla, M.; Vasquez, J.; Zafiropoulos, D.; Sarchiapone, L.; Benini, D.; Favaron, P.; Rigato, M.; Pegoraro, R.; Maniero, D.; Calabretta, L.; Comunian, M.; Maggiore, M.; Lombardi, A.; Piazza, L.; Porcellato, A. M.; Roncolato, C.; Bisoffi, G.; Pisent, A.; Galatà, A.; Giacchini, M.; Bassato, G.; Canella, S.; Gramegna, F.; Valiente, J.; Bermudez, J.; Mastinu, P. F.; Esposito, J.; Wyss, J.; Russo, A.; Zanella, S.
2015-04-01
A new Radioactive Ion Beam (RIB) facility (SPES) is presently under construction at the Legnaro National Laboratories of INFN. The SPES facility is based on the ISOL method using an UCx Direct Target able to sustain a power of 10 kW. The primary proton beam is provided by a high current Cyclotron accelerator with energy of 35-70 MeV and a beam current of 0.2-0.5 mA. Neutron-rich radioactive ions are produced by proton induced fission on an Uranium target at an expected fission rate of the order of 1013 fissions per second. After ionization and selection the exotic isotopes are re-accelerated by the ALPI superconducting LINAC at energies of 10A MeV for masses in the region A=130 amu. The expected secondary beam rates are of the order of 107 - 109 pps. Aim of the SPES facility is to deliver high intensity radioactive ion beams of neutron rich nuclei for nuclear physics research as well as to be an interdisciplinary research centre for radio-isotopes production for medicine and for neutron beams.
Direct single-molecule dynamic detection of chemical reactions
Guan, Jianxin; Jia, Chuancheng; Li, Yanwei; Liu, Zitong; Wang, Jinying; Yang, Zhongyue; Gu, Chunhui; Su, Dingkai; Houk, Kendall N.; Zhang, Deqing; Guo, Xuefeng
2018-01-01
Single-molecule detection can reveal time trajectories and reaction pathways of individual intermediates/transition states in chemical reactions and biological processes, which is of fundamental importance to elucidate their intrinsic mechanisms. We present a reliable, label-free single-molecule approach that allows us to directly explore the dynamic process of basic chemical reactions at the single-event level by using stable graphene-molecule single-molecule junctions. These junctions are constructed by covalently connecting a single molecule with a 9-fluorenone center to nanogapped graphene electrodes. For the first time, real-time single-molecule electrical measurements unambiguously show reproducible large-amplitude two-level fluctuations that are highly dependent on solvent environments in a nucleophilic addition reaction of hydroxylamine to a carbonyl group. Both theoretical simulations and ensemble experiments prove that this observation originates from the reversible transition between the reactant and a new intermediate state within a time scale of a few microseconds. These investigations open up a new route that is able to be immediately applied to probe fast single-molecule physics or biophysics with high time resolution, making an important contribution to broad fields beyond reaction chemistry. PMID:29487914
Gimeno-Santos, Elena; Raste, Yogini; Demeyer, Heleen; Louvaris, Zafeiris; de Jong, Corina; Rabinovich, Roberto A.; Hopkinson, Nicholas S.; Polkey, Michael I.; Vogiatzis, Ioannis; Tabberer, Maggie; Dobbels, Fabienne; Ivanoff, Nathalie; de Boer, Willem I.; van der Molen, Thys; Kulich, Karoly; Serra, Ignasi; Basagaña, Xavier; Troosters, Thierry; Puhan, Milo A.; Karlsson, Niklas
2015-01-01
No current patient-centred instrument captures all dimensions of physical activity in chronic obstructive pulmonary disease (COPD). Our objective was item reduction and initial validation of two instruments to measure physical activity in COPD. Physical activity was assessed in a 6-week, randomised, two-way cross-over, multicentre study using PROactive draft questionnaires (daily and clinical visit versions) and two activity monitors. Item reduction followed an iterative process including classical and Rasch model analyses, and input from patients and clinical experts. 236 COPD patients from five European centres were included. Results indicated the concept of physical activity in COPD had two domains, labelled “amount” and “difficulty”. After item reduction, the daily PROactive instrument comprised nine items and the clinical visit contained 14. Both demonstrated good model fit (person separation index >0.7). Confirmatory factor analysis supported the bidimensional structure. Both instruments had good internal consistency (Cronbach's α>0.8), test–retest reliability (intraclass correlation coefficient ≥0.9) and exhibited moderate-to-high correlations (r>0.6) with related constructs and very low correlations (r<0.3) with unrelated constructs, providing evidence for construct validity. Daily and clinical visit “PROactive physical activity in COPD” instruments are hybrid tools combining a short patient-reported outcome questionnaire and two activity monitor variables which provide simple, valid and reliable measures of physical activity in COPD patients. PMID:26022965
Gimeno-Santos, Elena; Raste, Yogini; Demeyer, Heleen; Louvaris, Zafeiris; de Jong, Corina; Rabinovich, Roberto A; Hopkinson, Nicholas S; Polkey, Michael I; Vogiatzis, Ioannis; Tabberer, Maggie; Dobbels, Fabienne; Ivanoff, Nathalie; de Boer, Willem I; van der Molen, Thys; Kulich, Karoly; Serra, Ignasi; Basagaña, Xavier; Troosters, Thierry; Puhan, Milo A; Karlsson, Niklas; Garcia-Aymerich, Judith
2015-10-01
No current patient-centred instrument captures all dimensions of physical activity in chronic obstructive pulmonary disease (COPD). Our objective was item reduction and initial validation of two instruments to measure physical activity in COPD.Physical activity was assessed in a 6-week, randomised, two-way cross-over, multicentre study using PROactive draft questionnaires (daily and clinical visit versions) and two activity monitors. Item reduction followed an iterative process including classical and Rasch model analyses, and input from patients and clinical experts.236 COPD patients from five European centres were included. Results indicated the concept of physical activity in COPD had two domains, labelled "amount" and "difficulty". After item reduction, the daily PROactive instrument comprised nine items and the clinical visit contained 14. Both demonstrated good model fit (person separation index >0.7). Confirmatory factor analysis supported the bidimensional structure. Both instruments had good internal consistency (Cronbach's α>0.8), test-retest reliability (intraclass correlation coefficient ≥0.9) and exhibited moderate-to-high correlations (r>0.6) with related constructs and very low correlations (r<0.3) with unrelated constructs, providing evidence for construct validity.Daily and clinical visit "PROactive physical activity in COPD" instruments are hybrid tools combining a short patient-reported outcome questionnaire and two activity monitor variables which provide simple, valid and reliable measures of physical activity in COPD patients. Copyright ©ERS 2015.
DOT National Transportation Integrated Search
1979-07-01
This study is to determined by physical, chemical, and biological means, the effects of bridged highway construction techniques on water quality in wetlands. Water quality was monitored before, during, and after construction. The data shows the incre...
Constructive and Unconstructive Repetitive Thought
ERIC Educational Resources Information Center
Watkins, Edward R.
2008-01-01
The author reviews research showing that repetitive thought (RT) can have constructive or unconstructive consequences. The main unconstructive consequences of RT are (a) depression, (b) anxiety, and (c) difficulties in physical health. The main constructive consequences of RT are (a) recovery from upsetting and traumatic events, (b) adaptive…
Physical and non-physical energy in scattered wave source-receiver interferometry.
Meles, Giovanni Angelo; Curtis, Andrew
2013-06-01
Source-receiver interferometry allows Green's functions between sources and receivers to be estimated by means of convolution and cross-correlation of other wavefields. Source-receiver interferometry has been observed to work surprisingly well in practical applications when theoretical requirements (e.g., complete enclosing boundaries of other sources and receivers) are contravened: this paper contributes to explain why this may be true. Commonly used inter-receiver interferometry requires wavefields to be generated around specific stationary points in space which are controlled purely by medium heterogeneity and receiver locations. By contrast, application of source-receiver interferometry constructs at least kinematic information about physically scattered waves between a source and a receiver by cross-convolution of scattered waves propagating from and to any points on the boundary. This reduces the ambiguity in interpreting wavefields generated using source-receiver interferometry with only partial boundaries (as is standard in practical applications), as it allows spurious or non-physical energy in the constructed Green's function to be identified and ignored. Further, source-receiver interferometry (which includes a step of inter-receiver interferometry) turns all types of non-physical or spurious energy deriving from inter-receiver interferometry into what appears to be physical energy. This explains in part why source-receiver interferometry may perform relatively well compared to inter-receiver interferometry when constructing scattered wavefields.
Grawe, Gregory Ferreira; de Oliveira, Tássia Regina; de Andrade Narciso, Esther; Moccelini, Sally Katiuce; Terezo, Ailton José; Soares, Marcos Antonio; Castilho, Marilza
2015-01-15
In this work, a biosensor was constructed by physical adsorption of the isolated endophytic fungus Eupenicillium shearii FREI-39 esterase on halloysite, using graphite powder, multi-walled carbon nanotubes and mineral oil for the determination of carbofuran pesticide by inhibition of the esterase using square-wave voltammetry (SWV). Specific esterase activities were determined each 2 days over a period of 15 days of growth in four different inoculation media. The highest specific activity was found on 6th day, with 33.08 U on PDA broth. The best performance of the proposed biosensor was obtained using 0.5 U esterase activity. The carbofuran concentration response was linear in the range from 5.0 to 100.0 µg L(-1) (r=0.9986) with detection and quantification limits of 1.69 µg L(-1) and 5.13 µg L(-1), respectively. A recovery study of carbofuran in spiked water samples showed values ranging from 103.8±6.7% to 106.7±9.7%. The biosensor showed good repeatability and reproducibility and remained stable for a period of 20 weeks. The determination of carbofuran in spiked water samples using the proposed biosensor was satisfactory when compared to the chromatographic reference method. The results showed no significant difference at the 95% confidence level with t-test statistics. The application of enzymes from endophytic fungi in constructing biosensors broadens the biotechnological importance of these microorganisms. Copyright © 2014 Elsevier B.V. All rights reserved.
Custom Machines Advance Composite Manufacturing
NASA Technical Reports Server (NTRS)
2012-01-01
Here is a brief list of materials that NASA will not be using to construct spacecraft: wood, adobe, fiberglass, bone. While it might be obvious why these materials would not make for safe space travel, they do share a common characteristic with materials that may well be the future foundation of spacecraft design: They all are composites. Formed of two or more unlike materials - such as cellulose and lignin in the case of wood, or glass fibers and plastic resin in the case of fiberglass-composites provide enhanced mechanical and physical properties through the combination of their constituent materials. For this reason, composites are used in everything from buildings, bathtubs, and countertops to boats, racecars, and sports equipment. NASA continually works to develop new materials to enable future space missions - lighter, less expensive materials that can still withstand the extreme demands of space travel. Composites such as carbon fiber materials offer promising solutions in this regard, providing strength and stiffness comparable to metals like aluminum but with less weight, allowing for benefits like better fuel efficiency and simpler propulsion system design. Composites can also be made fatigue tolerant and thermally stable - useful in space where temperatures can swing hundreds of degrees. NASA has recently explored the use of composites for aerospace applications through projects like the Composite Crew Module (CCM), a composite-constructed version of the aluminum-lithium Multipurpose Crew Capsule. The CCM was designed to give NASA engineers a chance to gain valuable experience developing and testing composite aerospace structures.
Nigg, Claudio R; Motl, Robert W; Horwath, Caroline; Dishman, Rod K
2012-01-01
Objectives Physical activity (PA) research applying the Transtheoretical Model (TTM) to examine group differences and/or change over time requires preliminary evidence of factorial validity and invariance. The current study examined the factorial validity and longitudinal invariance of TTM constructs recently revised for PA. Method Participants from an ethnically diverse sample in Hawaii (N=700) completed questionnaires capturing each TTM construct. Results Factorial validity was confirmed for each construct using confirmatory factor analysis with full-information maximum likelihood. Longitudinal invariance was evidenced across a shorter (3-month) and longer (6-month) time period via nested model comparisons. Conclusions The questionnaires for each validated TTM construct are provided, and can now be generalized across similar subgroups and time points. Further validation of the provided measures is suggested in additional populations and across extended time points. PMID:22778669
Cup Stacking: Does It Deserve a Place in Physical Education Curricula?
ERIC Educational Resources Information Center
Udermann, Brian E.; Murray, Steven R.
2006-01-01
Cup stacking has become commonplace in today's physical education nomenclature. Proponents make claims that cup stacking improves cognitive, affective, and psychomotor abilities. At physical education conferences, scores of professional physical educators eagerly watch cup stacking representatives construct and deconstruct a variety of pyramids…
Constructing Cardiovascular Fitness Knowledge in Physical Education
ERIC Educational Resources Information Center
Zhang, Tan; Chen, Ang; Chen, Senlin; Hong, Deockki; Loflin, Jerry; Ennis, Catherine
2014-01-01
In physical education, it has become necessary for children to learn kinesiological knowledge for understanding the benefits of physical activity and developing a physically active lifestyle. This study was conducted to determine the extent to which cognitive assignments about healthful living and fitness contributed to knowledge growth on…
48 CFR 36.504 - Physical data.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 48 Federal Acquisition Regulations System 1 2014-10-01 2014-10-01 false Physical data. 36.504... CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Contract Clauses 36.504 Physical data. The contracting officer shall insert the clause at 52.236-4, Physical Data, in solicitations and contracts when a...
38 CFR 52.200 - Physical environment.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 38 Pensions, Bonuses, and Veterans' Relief 2 2013-07-01 2013-07-01 false Physical environment. 52...) PER DIEM FOR ADULT DAY HEALTH CARE OF VETERANS IN STATE HOMES Standards § 52.200 Physical environment. The physical environment must be designed, constructed, equipped, and maintained to protect the health...
38 CFR 52.200 - Physical environment.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 38 Pensions, Bonuses, and Veterans' Relief 2 2011-07-01 2011-07-01 false Physical environment. 52...) PER DIEM FOR ADULT DAY HEALTH CARE OF VETERANS IN STATE HOMES Standards § 52.200 Physical environment. The physical environment must be designed, constructed, equipped, and maintained to protect the health...
48 CFR 36.504 - Physical data.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Physical data. 36.504... CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Contract Clauses 36.504 Physical data. The contracting officer shall insert the clause at 52.236-4, Physical Data, in solicitations and contracts when a...
38 CFR 52.200 - Physical environment.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 38 Pensions, Bonuses, and Veterans' Relief 2 2012-07-01 2012-07-01 false Physical environment. 52...) PER DIEM FOR ADULT DAY HEALTH CARE OF VETERANS IN STATE HOMES Standards § 52.200 Physical environment. The physical environment must be designed, constructed, equipped, and maintained to protect the health...
48 CFR 36.504 - Physical data.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Physical data. 36.504... CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Contract Clauses 36.504 Physical data. The contracting officer shall insert the clause at 52.236-4, Physical Data, in solicitations and contracts when a...
48 CFR 36.504 - Physical data.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 48 Federal Acquisition Regulations System 1 2013-10-01 2013-10-01 false Physical data. 36.504... CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Contract Clauses 36.504 Physical data. The contracting officer shall insert the clause at 52.236-4, Physical Data, in solicitations and contracts when a...
48 CFR 36.504 - Physical data.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 48 Federal Acquisition Regulations System 1 2012-10-01 2012-10-01 false Physical data. 36.504... CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Contract Clauses 36.504 Physical data. The contracting officer shall insert the clause at 52.236-4, Physical Data, in solicitations and contracts when a...
38 CFR 52.200 - Physical environment.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 38 Pensions, Bonuses, and Veterans' Relief 2 2014-07-01 2014-07-01 false Physical environment. 52...) PER DIEM FOR ADULT DAY HEALTH CARE OF VETERANS IN STATE HOMES Standards § 52.200 Physical environment. The physical environment must be designed, constructed, equipped, and maintained to protect the health...
38 CFR 52.200 - Physical environment.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Physical environment. 52...) PER DIEM FOR ADULT DAY HEALTH CARE OF VETERANS IN STATE HOMES Standards § 52.200 Physical environment. The physical environment must be designed, constructed, equipped, and maintained to protect the health...
Koenig, H G; Hays, J C; George, L K; Blazer, D G; Larson, D B; Landerman, L R
1997-01-01
The authors examined models of the relationships between religious activities, physical health, social support, and depressive symptoms in a sample of 4,000 persons age 65 and over. Religious activity was examined first as a single composite construct and then split into three component variables that were examined individually. Religious activity as a single construct was correlated with both social support and good physical health but was unrelated to depression. Split into the three components, model fit was significantly increased. Frequency of church attendance was positively related to physical health and negatively related to depression, but was surprisingly unrelated to social support. Frequent churchgoers were about half as likely to be depressed. Private prayer/Bible reading was negatively correlated with physical health and positively correlated with social support, but unrelated to depression. Religious TV/radio listening was unrelated to social support, negatively related to good physical health, and, unexpectedly, positively associated with depression.
Using Stable Isotopes to Assess Reduced Physical Activity of Individuals with Prader-Willi Syndrome.
ERIC Educational Resources Information Center
Davies, Peter S. W.; Joughlin, C.
1993-01-01
This study found that the physical activity levels of 10 children with Prader-Willi syndrome were significantly reduced in comparison to children without the syndrome. Increasing activity levels in children with Prader-Willi syndrome is suggested as a way to raise total energy expenditure and control weight gain. (Author/JDD)
Reformulation of Nonlinear Anisotropic Crystal Elastoplasticity for Impact Physics
2015-03-01
interest include metals, ceramics , minerals, and energetic materials . Accurate, efficient, stable, and thermodynamically consistent models for...Clayton JD. Phase field theory and analysis of pressure-shear induced amorphization and failure in boron carbide ceramic . AIMS Materials Science. 2014;1...of Nonlinear Anisotropic Crystal Elastoplasticity for Impact Physics by JD Clayton Weapons and Materials Research Directorate, ARL
ERIC Educational Resources Information Center
Petosa, R. Lingyak; Silfee, Valerie
2016-01-01
Background: Studies have revealed that overweight adults with type 2 diabetes have low rates of physical activity and are resistant to change. Purpose: The purpose of this study was to use construct validation of intervention methods to examine the impact of a 4-week behavioral intervention on the use of self-regulation skills for physical…
ERIC Educational Resources Information Center
Papalexopoulos, Panagiotis F.; Vavougios, Dionisios; Vlachos, Filippos; Karapetsas, Argiris B.
2008-01-01
In this paper we studied the effectiveness of the writing criteria that are proposed to be applied during the construction of physics texts so that students with dyslexia do not confront reading difficulties with them. The effectiveness of the criteria has been assessed by the accomplishment of an investigation among students with and without…
Reliability and Validity of an Internet-based Questionnaire Measuring Lifetime Physical Activity
De Vera, Mary A.; Ratzlaff, Charles; Doerfling, Paul; Kopec, Jacek
2010-01-01
Lifetime exposure to physical activity is an important construct for evaluating associations between physical activity and disease outcomes, given the long induction periods in many chronic diseases. The authors' objective in this study was to evaluate the measurement properties of the Lifetime Physical Activity Questionnaire (L-PAQ), a novel Internet-based, self-administered instrument measuring lifetime physical activity, among Canadian men and women in 2005–2006. Reliability was examined using a test-retest study. Validity was examined in a 2-part study consisting of 1) comparisons with previously validated instruments measuring similar constructs, the Lifetime Total Physical Activity Questionnaire (LT-PAQ) and the Chasan-Taber Physical Activity Questionnaire (CT-PAQ), and 2) a priori hypothesis tests of constructs measured by the L-PAQ. The L-PAQ demonstrated good reliability, with intraclass correlation coefficients ranging from 0.67 (household activity) to 0.89 (sports/recreation). Comparison between the L-PAQ and the LT-PAQ resulted in Spearman correlation coefficients ranging from 0.41 (total activity) to 0.71 (household activity); comparison between the L-PAQ and the CT-PAQ yielded coefficients of 0.58 (sports/recreation), 0.56 (household activity), and 0.50 (total activity). L-PAQ validity was further supported by observed relations between the L-PAQ and sociodemographic variables, consistent with a priori hypotheses. Overall, the L-PAQ is a useful instrument for assessing multiple domains of lifetime physical activity with acceptable reliability and validity. PMID:20876666
Reliability and validity of an internet-based questionnaire measuring lifetime physical activity.
De Vera, Mary A; Ratzlaff, Charles; Doerfling, Paul; Kopec, Jacek
2010-11-15
Lifetime exposure to physical activity is an important construct for evaluating associations between physical activity and disease outcomes, given the long induction periods in many chronic diseases. The authors' objective in this study was to evaluate the measurement properties of the Lifetime Physical Activity Questionnaire (L-PAQ), a novel Internet-based, self-administered instrument measuring lifetime physical activity, among Canadian men and women in 2005-2006. Reliability was examined using a test-retest study. Validity was examined in a 2-part study consisting of 1) comparisons with previously validated instruments measuring similar constructs, the Lifetime Total Physical Activity Questionnaire (LT-PAQ) and the Chasan-Taber Physical Activity Questionnaire (CT-PAQ), and 2) a priori hypothesis tests of constructs measured by the L-PAQ. The L-PAQ demonstrated good reliability, with intraclass correlation coefficients ranging from 0.67 (household activity) to 0.89 (sports/recreation). Comparison between the L-PAQ and the LT-PAQ resulted in Spearman correlation coefficients ranging from 0.41 (total activity) to 0.71 (household activity); comparison between the L-PAQ and the CT-PAQ yielded coefficients of 0.58 (sports/recreation), 0.56 (household activity), and 0.50 (total activity). L-PAQ validity was further supported by observed relations between the L-PAQ and sociodemographic variables, consistent with a priori hypotheses. Overall, the L-PAQ is a useful instrument for assessing multiple domains of lifetime physical activity with acceptable reliability and validity.
NASA Astrophysics Data System (ADS)
Bezruczko, N.; Stanley, T.; Battle, M.; Latty, C.
2016-11-01
Despite broad sweeping pronouncements by international research organizations that social sciences are being integrated into global research programs, little attention has been directed toward obstacles blocking productive collaborations. In particular, social sciences routinely implement nonlinear, ordinal measures, which fundamentally inhibit integration with overarching scientific paradigms. The widely promoted general linear model in contemporary social science methods is largely based on untransformed scores and ratings, which are neither objective nor linear. This issue has historically separated physical and social sciences, which this report now asserts is unnecessary. In this research, nonlinear, subjective caregiver ratings of confidence to care for children supported by complex, medical technologies were transformed to an objective scale defined by logits (N=70). Transparent linear units from this transformation provided foundational insights into measurement properties of a social- humanistic caregiving construct, which clarified physical and social caregiver implications. Parameterized items and ratings were also subjected to multivariate hierarchical analysis, then decomposed to demonstrate theoretical coherence (R2 >.50), which provided further support for convergence of mathematical parameterization, physical expectations, and a social-humanistic construct. These results present substantial support for improving integration of social sciences with contemporary scientific research programs by emphasizing construction of common variables with objective, linear units.
Ng, Nawi; Söderman, Kerstin; Norberg, Margareta; Öhman, Ann
2011-01-01
Physical activity is identified as one important protective factor for chronic diseases. Physical activity surveillance is important in assessing healthy population behaviour over time. Many countries lack population trends on physical activity. To present trends in physical activity levels in Västerbotten County, Sweden and to evaluate physical activity among women and men with various educational levels. Population-based cross-sectional and panel data from the Västerbotten Intervention Programme (VIP) during 1990-2007 were used. All individuals in Västerbotten County who turned 40, 50, or 60 years old were invited to their local primary health care for a health screening. Physical activity during commuting, recreational activities, physical exercise, and socio-demographic data were collected using a self-administered questionnaire. Respondents were categorised as sedentary, moderate physically active, or physically active. The prevalences of physically active behaviours increased from 16 to 24.2% among men and from 12.6 to 30.4% among women. Increases are observed in all educational groups, but gaps between educational groups widened recently. The level of sedentary behaviour was stable over the time period studied. The 10-year follow-up data show that the prevalences of physically active behaviours increased from 15.8 to 21.4% among men and 12.7 to 23.3% among women. However, 10.2% of men and 3.8% of women remained sedentary. Despite the promising evidence of increasing physical activity levels among the population in Västerbotten County, challenges remain for how to reduce the stable levels of sedentary behaviours in some subgroups. Persisting social gaps in physical activity levels should be addressed further. An exploration of people's views on engaging in physical activity and barriers to doing so will allow better formulation of targeted interventions within this population. Global Health Action 2011. © 2011 N. Ng et al.
Biomechanical analysis of posteromedial tibial plateau split fracture fixation.
Zeng, Zhi-Min; Luo, Cong-Feng; Putnis, Sven; Zeng, Bing-Fang
2011-01-01
The purpose of this study was to compare the biomechanical strength of four different fixation methods for a posteromedial tibial plateau split fracture. Twenty-eight tibial plateau fractures were simulated using right-sided synthetic tibiae models. Each fracture model was randomly instrumented with one of the four following constructs, anteroposterior lag-screws, an anteromedial limited contact dynamic compression plate (LC-DCP), a lateral locking plate, or a posterior T-shaped buttress plate. Vertical subsidence of the posteromedial fragment was measured from 500 N to 1500 N during biomechanical testing, the maximum load to failure was also determined. It was found that the posterior T-shaped buttress plate allowed the least subsidence of the posteromedial fragment and produced the highest mean failure load than each of the other three constructs (P=0.00). There was no statistical significant difference between using lag screws or an anteromedial LC-DCP construct for the vertical subsidence at a 1500 N load and the load to failure (P>0.05). This study showed that a posterior-based buttress technique is biomechanically the most stable in-vitro fixation method for posteromedial split tibial plateau fractures, with AP screws and anteromedial-based LC-DCP are not as stable for this type of fracture. Copyright © 2010 Elsevier B.V. All rights reserved.
NASA Astrophysics Data System (ADS)
Tan, Chao; Chen, Hui; Wang, Chao; Zhu, Wanping; Wu, Tong; Diao, Yuanbo
2013-03-01
Near and mid-infrared (NIR/MIR) spectroscopy techniques have gained great acceptance in the industry due to their multiple applications and versatility. However, a success of application often depends heavily on the construction of accurate and stable calibration models. For this purpose, a simple multi-model fusion strategy is proposed. It is actually the combination of Kohonen self-organizing map (KSOM), mutual information (MI) and partial least squares (PLSs) and therefore named as KMICPLS. It works as follows: First, the original training set is fed into a KSOM for unsupervised clustering of samples, on which a series of training subsets are constructed. Thereafter, on each of the training subsets, a MI spectrum is calculated and only the variables with higher MI values than the mean value are retained, based on which a candidate PLS model is constructed. Finally, a fixed number of PLS models are selected to produce a consensus model. Two NIR/MIR spectral datasets from brewing industry are used for experiments. The results confirms its superior performance to two reference algorithms, i.e., the conventional PLS and genetic algorithm-PLS (GAPLS). It can build more accurate and stable calibration models without increasing the complexity, and can be generalized to other NIR/MIR applications.
Perfectionism, procrastination, and psychological distress.
Rice, Kenneth G; Richardson, Clarissa M E; Clark, Dustin
2012-04-01
Using a cross-panel design and data from 2 successive cohorts of college students (N = 357), we examined the stability of maladaptive perfectionism, procrastination, and psychological distress across 3 time points within a college semester. Each construct was substantially stable over time, with procrastination being especially stable. We also tested, but failed to support, a mediational model with Time 2 (mid-semester) procrastination as a hypothesized mechanism through which Time 1 (early-semester) perfectionism would affect Time 3 (end-semester) psychological distress. An alternative model with Time 2 perfectionism as a mediator of the procrastination-distress association also was not supported. Within-time analyses revealed generally consistent strength of effects in the correlations between the 3 constructs over the course of the semester. A significant interaction effect also emerged. Time 1 procrastination had no effect on otherwise high levels of psychological distress at the end of the semester for highly perfectionistic students, but at low levels of Time 1 perfectionism, the most distressed students by the end of the term were those who were more likely to have procrastinated earlier in the semester. Implications of the stability of the constructs and their association over time, as well as the moderating effects of procrastination, are discussed in the context of maladaptive perfectionism and problematic procrastination.
New Convex and Spherical Structures of Bare Boron Clusters
NASA Astrophysics Data System (ADS)
Boustani, Ihsan
1997-10-01
New stable structures of bare boron clusters can easily be obtained and constructed with the help of an "Aufbau Principle" suggested by a systematicab initioHF-SCF and direct CI study. It is concluded that boron cluster formation can be established by elemental units of pentagonal and hexagonal pyramids. New convex and small spherical clusters different from the classical known forms of boron crystal structures are obtained by a combination of both basic units. Convex structures simulate boron surfaces which can be considered as segments of open or closed spheres. Both convex clusters B16and B46have energies close to those of their conjugate quasi-planar clusters, which are relatively stable and can be considered to act as a calibration mark. The closed spherical clusters B12, B22, B32, and B42are less stable than the corresponding conjugated quasi-planar structures. As a consequence, highly stable spherical boron clusters can systematically be predicted when their conjugate quasi-planar clusters are determined and energies are compared.
[Research progress on food sources and food web structure of wetlands based on stable isotopes].
Chen, Zhan Yan; Wu, Hai Tao; Wang, Yun Biao; Lyu, Xian Guo
2017-07-18
The trophic dynamics of wetland organisms is the basis of assessing wetland structure and function. Stable isotopes of carbon and nitrogen have been widely applied to identify trophic relationships in food source, food composition and food web transport in wetland ecosystem studies. This paper provided an overall review about the current methodology of isotope mixing model and trophic level in wetland ecosystems, and discussed the standards of trophic fractionation and baseline. Moreover, we characterized the typical food sources and isotopic compositions of wetland ecosystems, summarized the food sources in different trophic levels of herbivores, omnivores and carnivores based on stable isotopic analyses. We also discussed the limitations of stable isotopes in tra-cing food sources and in constructing food webs. Based on the current results, development trends and upcoming requirements, future studies should focus on sample treatment, conservation and trophic enrichment measurement in the wetland food web, as well as on combing a variety of methodologies including traditional stomach stuffing, molecular markers, and multiple isotopes.
Stable and 'bounded excursion' gravastars, and black holes in Einstein's theory of gravity
DOE Office of Scientific and Technical Information (OSTI.GOV)
Rocha, P; Da Silva, M F A; Wang, Anzhong
2008-11-15
Dynamical models of prototype gravastars are constructed and studied. The models are the Visser-Wiltshire three-layer gravastars, in which an infinitely thin spherical shell of a perfect fluid with the equation of state p = (1-{gamma}){sigma} divides the whole spacetime into two regions, where the internal region is de Sitter, and the external one is Schwarzschild. When {gamma}<1 and {Lambda}{ne}0, it is found that in some cases the models represent stable gravastars, and in some cases they represent 'bounded excursion' stable gravastars, where the thin shell is oscillating between two finite radii, while in some other cases they collapse until themore » formation of black holes occurs. However, when {gamma}{>=}1, even with {Lambda}{ne}0, only black holes are found. In the phase space, the region for both stable gravastars and 'bounded excursion' gravastars is very small in comparison to that for black holes, although it is not completely empty.« less
Perspective: Highly stable vapor-deposited glasses
Ediger, M. D.
2017-12-07
This paper describes recent progress in understanding highly stable glasses prepared by physical vapor deposition and provides perspective on further research directions for the field. For a given molecule, vapor-deposited glasses can have higher density and lower enthalpy than any glass that can be prepared by the more traditional route of cooling a liquid, and such glasses also exhibit greatly enhanced kinetic stability. Because vapor-deposited glasses can approach the bottom of the amorphous part of the potential energy landscape, they provide insights into the properties expected for the “ideal glass”. Connections between vapor-deposited glasses, liquid-cooled glasses, and deeply supercooled liquidsmore » are explored. The generality of stable glass formation for organic molecules is discussed along with the prospects for stable glasses of other types of materials.« less
Perspective: Highly stable vapor-deposited glasses
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ediger, M. D.
This paper describes recent progress in understanding highly stable glasses prepared by physical vapor deposition and provides perspective on further research directions for the field. For a given molecule, vapor-deposited glasses can have higher density and lower enthalpy than any glass that can be prepared by the more traditional route of cooling a liquid, and such glasses also exhibit greatly enhanced kinetic stability. Because vapor-deposited glasses can approach the bottom of the amorphous part of the potential energy landscape, they provide insights into the properties expected for the “ideal glass”. Connections between vapor-deposited glasses, liquid-cooled glasses, and deeply supercooled liquidsmore » are explored. The generality of stable glass formation for organic molecules is discussed along with the prospects for stable glasses of other types of materials.« less
NASA Technical Reports Server (NTRS)
Desoer, C. A.; Kabuli, M. G.
1989-01-01
The authors consider a linear (not necessarily time-invariant) stable unity-feedback system, where the plant and the compensator have normalized right-coprime factorizations. They study two cases of nonlinear plant perturbations (additive and feedback), with four subcases resulting from: (1) allowing exogenous input to Delta P or not; 2) allowing the observation of the output of Delta P or not. The plant perturbation Delta P is not required to be stable. Using the factorization approach, the authors obtain necessary and sufficient conditions for all cases in terms of two pairs of nonlinear pseudostate maps. Simple physical considerations explain the form of these necessary and sufficient conditions. Finally, the authors obtain the characterization of all perturbations Delta P for which the perturbed system remains stable.
NASA Astrophysics Data System (ADS)
Essary, David S.
The performance gap between processors and storage systems has been increasingly critical over the years. Yet the performance disparity remains, and further, storage energy consumption is rapidly becoming a new critical problem. While smarter caching and predictive techniques do much to alleviate this disparity, the problem persists, and data storage remains a growing contributor to latency and energy consumption. Attempts have been made at data layout maintenance, or intelligent physical placement of data, yet in practice, basic heuristics remain predominant. Problems that early studies sought to solve via layout strategies were proven to be NP-Hard, and data layout maintenance today remains more art than science. With unknown potential and a domain inherently full of uncertainty, layout maintenance persists as an area largely untapped by modern systems. But uncertainty in workloads does not imply randomness; access patterns have exhibited repeatable, stable behavior. Predictive information can be gathered, analyzed, and exploited to improve data layouts. Our goal is a dynamic, robust, sustainable predictive engine, aimed at improving existing layouts by replicating data at the storage device level. We present a comprehensive discussion of the design and construction of such a predictive engine, including workload evaluation, where we present and evaluate classical workloads as well as our own highly detailed traces collected over an extended period. We demonstrate significant gains through an initial static grouping mechanism, and compare against an optimal grouping method of our own construction, and further show significant improvement over competing techniques. We also explore and illustrate the challenges faced when moving from static to dynamic (i.e. online) grouping, and provide motivation and solutions for addressing these challenges. These challenges include metadata storage, appropriate predictive collocation, online performance, and physical placement. We reduced the metadata needed by several orders of magnitude, reducing the required volume from more than 14% of total storage down to less than 1/2%. We also demonstrate how our collocation strategies outperform competing techniques. Finally, we present our complete model and evaluate a prototype implementation against real hardware. This model was demonstrated to be capable of reducing device-level accesses by up to 65%. Keywords: computer systems, collocation, data management, file systems, grouping, metadata, modeling and prediction, operating systems, performance, power, secondary storage.
The Influence of Urban Planning Affected Static and Stable Meteorological Field on Air Pollution
NASA Astrophysics Data System (ADS)
Zhang, Yue; Zhang, Liyuan; Zhang, Yunwei
2018-02-01
Accompany with the rapid urbanized and industrialized process, the built-up area and the number of high-rise buildings increased fast. Urban air quality is facing with the challenge caused by the rapid increase in energy consumption, motor vehicles owned, and the city construction. Long term high precision analysis on Beijing-Tianjin-Hebei region has been conducted in this article, so as to explore the influence of rapid increase in urban size and tall building amount on occurrence frequency of urban static and stable meteorological conditions as well as the contribution to urban PM2.5 pollution.
Stable optical soliton in the ring-cavity fiber system with carbon nanotube as saturable absorber
NASA Astrophysics Data System (ADS)
Li, Bang-Qing; Ma, Yu-Lan; Yang, Tie-Mei
2018-01-01
Main attention focuses on the theoretical study of the ring-cavity fiber laser system with carbon nanotubes (CNT) as saturable absorber (SA). The system is modelled as a non-standard Schrödinger equation with the coefficients blended real and imaginary numbers. New stable exact soliton solution is constructed by the bilinear transformation method for the system. The influences of the key parameters related to CNTs and SA on the optical pulse soliton are discussed in simulation. The soliton amplitude and phase can be tuned by choosing suitable parameters.
Robert, B; Perrin, M-A; Coquerel, G; Céolin, R; Rietveld, I B
2016-03-01
The topological pressure-temperature phase diagram for the dimorphism of spiperone, a potent neuroleptic drug, has been constructed using literature data and improved crystal structures obtained with new crystallographic data from single-crystal X-ray diffraction at various temperatures. It is inferred that form II, which is the more dense form and exhibits the lower melting temperature, becomes the more stable phase under pressure. Under ambient conditions, form I is more stable. Copyright © 2015 Académie Nationale de Pharmacie. Published by Elsevier Masson SAS. All rights reserved.
Refinements of nonuniform estimates of the rate of convergence in the CLT to a stable law
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bloznyalis, M.
1994-10-25
In this paper we construct new nonuniform estimates for the rate of convergence to the strictly stable distribution with exponent {alpha} {element_of} [0, 2] in a finite-dimensional CLT. This paper is a continuation of [1,7]. The nonuniform estimates obtained here in terms of truncated pseudomoments (see Theorems 1, 2 below) have in certain cases a better order of decrease than the corresponding estimates [1, 7], where pseudomoments have been used. In the proofs of Theorems 1, 2 we have used basically the methods of [1, 7, 8].
NASA Astrophysics Data System (ADS)
Céolin, René; Rietveld, Ivo B.
2017-04-01
The phase behavior of pharmaceuticals is important for regulatory requirements and dosage form development. Racemic fluoxetine nitrate possesses two crystalline forms for which initial measurements indicated that they have a monotropic relationship with form I the only stable form. By constructing the topological pressure-temperature phase diagram, it has been shown that unexpectedly form II has a stable domain in the phase diagram and can be easily obtained by heating and grinding. The pressure necessary to obtain form II is only 11 MPa, which is much lower than most pressure used for tableting in the pharmaceutical industry.
Guirao-Goris, Silamani J; Ferrer Ferrandis, Esperanza; Montejano Lozoya, Raimunda
2016-02-18
The aim of the study is to identify the construct and criterion validity of the nursing diagnosis label Sedentary Lifestyle. A cross-sectional study in a nursing consultation in primary health care was conducted. Participants were all people that was attended for one year over 50 who voluntarily wish to participate (n=85) in the study. Objective weekly physical activity was measured in METs with an Accelerometer, objective measure of performance was measured by gait speed EPESE Battery (both measures that were used as the gold standard), and physical activity questionnaires (RAPA), the COOP-WONCA physical fitness chart. Spearman correlation coefficients, mean comparison tests and analysis of sensitivity and specificity were used as statistical analysis. The diagnosis "Sedentary Lifestyle" showed a positive correlation between its manifestations and physical activity measured in METs (r=0.39) and EPESE gait speed (r=0.35). The diagnosis showed a sensitivity of 85.1% and a specificity of 65.2% and showed ability to discriminate active people from those that are not using METs as a measure of physical activity (t=-4.4). The diagnosis "Sedentary Lifestyle" shows criterion and construct validity.
Knibbe, Carole; Schneider, Dominique; Beslon, Guillaume
2017-01-01
Metabolic cross-feeding interactions between microbial strains are common in nature, and emerge during evolution experiments in the laboratory, even in homogeneous environments providing a single carbon source. In sympatry, when the environment is well-mixed, the reasons why emerging cross-feeding interactions may sometimes become stable and lead to monophyletic genotypic clusters occupying specific niches, named ecotypes, remain unclear. As an alternative to evolution experiments in the laboratory, we developed Evo2Sim, a multi-scale model of in silico experimental evolution, equipped with the whole tool case of experimental setups, competition assays, phylogenetic analysis, and, most importantly, allowing for evolvable ecological interactions. Digital organisms with an evolvable genome structure encoding an evolvable metabolic network evolved for tens of thousands of generations in environments mimicking the dynamics of real controlled environments, including chemostat or batch culture providing a single limiting resource. We show here that the evolution of stable cross-feeding interactions requires seasonal batch conditions. In this case, adaptive diversification events result in two stably co-existing ecotypes, with one feeding on the primary resource and the other on by-products. We show that the regularity of serial transfers is essential for the maintenance of the polymorphism, as it allows for at least two stable seasons and thus two temporal niches. A first season is externally generated by the transfer into fresh medium, while a second one is internally generated by niche construction as the provided nutrient is replaced by secreted by-products derived from bacterial growth. In chemostat conditions, even if cross-feeding interactions emerge, they are not stable on the long-term because fitter mutants eventually invade the whole population. We also show that the long-term evolution of the two stable ecotypes leads to character displacement, at the level of the metabolic network but also of the genome structure. This difference of genome structure between both ecotypes impacts the stability of the cross-feeding interaction, when the population is propagated in chemostat conditions. This study shows the crucial role played by seasonality in temporal niche partitioning and in promoting cross-feeding subgroups into stable ecotypes, a premise to sympatric speciation. PMID:28358919
Return to work, economic hardship, and women's postpartum health.
Tucker, Jenna N; Grzywacz, Joseph G; Leng, Iris; Clinch, C Randall; Arcury, Thomas A
2010-10-01
This study followed a sample of 217 new mothers in a North Carolina county as they returned to work full-time, measuring their mental and physical health-related quality of life through 16 months postpartum. In general, working mothers of infants had mental health scores that were comparable to the general population of U.S. women, and physical health that was slightly better than women in general. Using ANCOVA and controlling for important demographic characteristics, health-related quality of life was compared between mothers experiencing low and high levels of economic hardship. Across the study period, women with high economic hardship, who constituted 30.7% of the sample, had levels of mental and physical health below those of women with low economic hardship. Mothers with high economic hardship also had less stable health trajectories than mothers with low economic hardship. The findings highlight the importance of reconsidering the traditionally accepted postpartum recovery period of six weeks and extending benefits, such as paid maternity and sick leave, as well as stable yet flexible work schedules.
How stable are physical activity habits among adults? The Doetinchem Cohort Study.
Picavet, H Susan J; Wendel-vos, G C Wanda; Vreeken, Hilda L; Schuit, A Jantine; Verschuren, W Monique M
2011-01-01
Leisure time physical activity in compliance with recommended levels is associated with improved health and lower mortality, but little is known on whether these physical activity habits are stable among adults and what characteristics predict physical activity changes. Our objective was to determine change in the levels of leisure time physical activity among adults during a period of 10 yr. Detailed information on time spent on cycling, gardening, doing odd jobs, and sports from three measurement periods (1993-1997, 1998-2002, and 2003-2007) of the population-based Doetinchem Cohort Study was used to define being active: spending at least 3.5 h·wk(-1) on moderate to vigorous physical activities, an approximation of the Dutch recommended level. Almost one-third (31.4%) of the population were active at all three points in time, 3.6% were inactive, and 45.0% of the participants changed their level of physical activity, almost equally distributed over decreasers, increasers, and varying. Not smoking (odds ratio (OR) = 1.47, 95% confidence limits (CL) = 1.14-1.89) and high socioeconomic status (OR = 1.43, 95% CL = 1.07-1.92) were associated with staying active. Inactive men (OR = 0.73, 95% CL = 0.57-0.94) had the highest risk of staying inactive, whereas good perceived health was associated with becoming active (OR = 1.49, 95% CL = 1.09-2.03). The finding that, in a decade, almost half of the population changed from active to inactive or vice versa affects the interpretation of the long-term health effects of physical activity measured only once, and it stresses the importance of interventions not only in increasing physical activity levels but also in maintaining a physically active lifestyle.
Prabhakar, Alisha; Lynch, Amy P; Ahearne, Mark
2016-04-01
Cartilage defects resulting from osteoarthritis (OA) or physical injury can severely reduce the quality of life for sufferers. Current treatment options are costly and not always effective in producing stable hyaline cartilage. Here we investigated a new treatment option that could potentially repair and regenerate damaged cartilage tissue. This novel approach involves the application of infrapatellar fat-pad derived chondroprogenitor cells onto a mechanically stable biodegradable polymer film that can be easily implanted into a defect site. Poly-ε-caprolactone (PCL) films were fabricated via solvent casting in either acetone or chloroform. The hydrophobicity, mechanical properties, and surface morphology of the films were examined. Progenitor cells from infrapatellar fat-pad were isolated, expanded, and then seeded onto the films. The cells were allowed to self-assemble on films, and these were then cultured in a chemically defined chondrogenic media for 28 days. The self-assembled tissue was characterized via histological staining, gene expression analysis, immunohistochemistry, and biochemical analysis. Chondrogenic differentiation was induced to generate a cartilaginous matrix upon the films. Despite differences between in the appearance, surface morphology, and mechanical properties of the films cast in chloroform or acetone, both methods produced tissues rich in sulfated glycosaminoglycan and collagen, although the extracellular matrix produced on chloroform-cast films appeared to contain more collagen type II and less collagen type I than acetone-cast films. These self-assembled constructs have the potential to be implanted into defect sites as a potential treatment for cartilage defect regeneration. Copyright © 2015 International Center for Artificial Organs and Transplantation and Wiley Periodicals, Inc.
Sheik, Cody S.; Stevenson, Emily I.; Den Uyl, Paul A.; Arendt, Carli A.; Aciego, Sarah M.; Dick, Gregory J.
2015-01-01
Glaciers are geologically important yet transient ecosystems that support diverse, biogeochemically significant microbial communities. During the melt season glaciers undergo dramatic physical, geochemical, and biological changes that exert great influence on downstream biogeochemical cycles. Thus, we sought to understand the temporal melt-season dynamics of microbial communities and associated geochemistry at the terminus of Lemon Creek Glacier (LCG) in coastal southern Alaska. Due to late season snowfall, sampling of LCG occurred in three interconnected areas: proglacial Lake Thomas, the lower glacial outflow stream, and the glacier’s terminus. LCG associated microbial communities were phylogenetically diverse and varied by sampling location. However, Betaproteobacteria, Alphaproteobacteria, and Bacteroidetes dominated communities at all sampling locations. Strict anaerobic groups such as methanogens, SR1, and OP11 were also recovered from glacier outflows, indicating anoxic conditions in at least some portions of the LCG subglacial environment. Microbial community structure was significantly correlated with sampling location and sodium concentrations. Microbial communities sampled from terminus outflow waters exhibited day-to-day fluctuation in taxonomy and phylogenetic similarity. However, these communities were not significantly different from randomly constructed communities from all three sites. These results indicate that glacial outflows share a large proportion of phylogenetic overlap with downstream environments and that the observed significant shifts in community structure are driven by changes in relative abundance of different taxa, and not complete restructuring of communities. We conclude that LCG glacial discharge hosts a diverse and relatively stable microbiome that shifts at fine taxonomic scales in response to geochemistry and likely water residence time. PMID:26042114
A transportable cold atom inertial sensor for space applications
NASA Astrophysics Data System (ADS)
Ménoret, V.; Geiger, R.; Stern, G.; Cheinet, P.; Battelier, B.; Zahzam, N.; Pereira Dos Santos, F.; Bresson, A.; Landragin, A.; Bouyer, P.
2017-11-01
Atom interferometry has hugely benefitted from advances made in cold atom physics over the past twenty years, and ultra-precise quantum sensors are now available for a wide range of applications [1]. In particular, cold atom interferometers have shown excellent performances in the field of acceleration and rotation measurements [2,3], and are foreseen as promising candidates for navigation, geophysics, geo-prospecting and tests of fundamental physics such as the Universality of Free Fall (UFF). In order to carry out a test of the UFF with atoms as test masses, one needs to compare precisely the accelerations of two atoms with different masses as they fall in the Earth's gravitational field. The sensitivity of atom interferometers scales like the square of the time during which the atoms are in free fall, and on ground this interrogation time is limited by the size of the experimental setup to a fraction of a second. Sending an atom interferometer in space would allow for several seconds of excellent free-fall conditions, and tests of the UFF could be carried out with precisions as low as 10-15 [4]. However, cold atoms experiments rely on complex laser systems, which are needed to cool down and manipulate the atoms, and these systems are usually very sensitive to temperature fluctuations and vibrations. In addition, when operating an inertial sensor, vibrations are a major issue, as they deteriorate the performances of the instrument. This is why cold atom interferometers are usually used in ground based facilities, which provide stable enough environments. In order to carry out airborne or space-borne measurements, one has to design an instrument which is both compact and stable, and such that vibrations induced by the platform will not deteriorate the sensitivity of the sensor. We report on the operation of an atom interferometer on board a plane carrying out parabolic flights (Airbus A300 Zero-G, operated by Novespace). We have constructed a compact and stable laser setup, which is well suited for onboard applications. Our goal is to implement a dual-species Rb-K atom interferometer in order to carry out a test of the UFF in the plane. In this perspective, we are designing a dual-wavelength laser source, which will enable us to cool down and coherently manipulate the quantum states of both atoms. We have successfully tested a preliminary version of the source and obtained a double species magneto-optical trap (MOT).
Social Support and Physical Health: The Importance of Belonging.
ERIC Educational Resources Information Center
Hale, Cara J.; Hannum, James W.; Espelage, Dorothy L.
2005-01-01
Social support is a multifaceted construct recognized as a significant predictor of physical health. In this study, the authors examined several support domains simultaneously in a sample of 247 college students to determine their unique prediction of physical health perceptions and physical symptoms. They also examined gender differences across…
Bridges. A Physics Unit for 14/15 Year Old Students. Experimental Edition.
ERIC Educational Resources Information Center
Utrecht State Univ., (Netherlands).
Bridges and similar constructions are highlighted in this book of guided lessons and activities for secondary school physics students. This program was developed by the Physics Curriculum Development Project under the auspices of the Physics Curriculum Innovation Committee. Contents include: (1) "Introduction" (presenting a rationale for…
Investigating Attitudes toward Physical Education: Validation across Two Instruments
ERIC Educational Resources Information Center
Donovan, Corinne Baron; Mercier, Kevin; Phillips, Sharon R.
2015-01-01
The Centers for Disease Control have suggested that physical education plays a role in promoting healthy lifestyles. Prior research suggests a link between attitudes toward physical education and physical activity outside school. The current study provides additional evidence of construct validity through a validation across two instruments…
DOE Office of Scientific and Technical Information (OSTI.GOV)
Arimura, Hidetaka, E-mail: arimurah@med.kyushu-u.ac.jp; Kamezawa, Hidemi; Jin, Ze
Good relationships between computational image analysis and radiological physics have been constructed for increasing the accuracy of medical diagnostic imaging and radiation therapy in radiological physics. Computational image analysis has been established based on applied mathematics, physics, and engineering. This review paper will introduce how computational image analysis is useful in radiation therapy with respect to radiological physics.
Social Cognitive Correlates of Physical Activity in Inactive Adults with Multiple Sclerosis
ERIC Educational Resources Information Center
Dlugonski, Deirdre; Wojcicki, Thomas R.; McAuley, Edward; Motl, Robert W.
2011-01-01
Persons with multiple sclerosis (MS) are often physically inactive. This observation has prompted the search for modifiable constructs derived from established theories that act as correlates of physical activity. This study investigated self efficacy, outcome expectations, impediments, and goal setting as correlates of physical activity in…
Physics Metacognition Inventory Part Ii: Confirmatory Factor Analysis and Rasch Analysis
ERIC Educational Resources Information Center
Taasoobshirazi, Gita; Bailey, MarLynn; Farley, John
2015-01-01
The Physics Metacognition Inventory was developed to measure physics students' metacognition for problem solving. In one of our earlier studies, an exploratory factor analysis provided evidence of preliminary construct validity, revealing six components of students' metacognition when solving physics problems including knowledge of cognition,…
Continuation of development of nitrides for space nuclear reactors
NASA Technical Reports Server (NTRS)
Potter, R. A.; Scott, J. L.
1974-01-01
Alloy nitrides (U,Zr), (U,Ce), and (U,Y) were prepared and exposed to vacuum at temperatures to 1700 C (1973 K) and compared with pure UN. Weight loss data and physical observations showed that the alloy samples were more stable than UN. In weight loss, (U,Zr)N was 3 times as stable as UN at 1600 C (1873 K) for 100 hr at 0.000002 torr (0.000266n/sq.m.).
Kruseman, Maaike; Schmutz, Noémi; Carrard, Isabelle
2017-01-01
To assess dietary intake, eating patterns, physical activity and eating behaviors, and to explore strategies and perceptions of the experience of weight maintenance in weight loss maintainers (weight loss maintenance (WLM) ≥ 10% weight loss maintained for ≥1 year) and in matched controls with a lifetime stable normal weight. Volunteers (32) were recruited by a snowball procedure in this cross-sectional, mixed-methods study. Diet, physical activity, and eating behaviors were assessed with validated questionnaires. Strategies and experiences were investigated during interviews. Descriptive coding, thematic analysis (qualitative data) as well as descriptive analysis and t-tests (quantitative data) were performed. Both groups had similar energy and macronutrient consumption. Those in the WLM group reported higher levels of exercise and scored higher on several dimensions of eating disorders. Four themes - 'food choices,' 'quantities and portion control,' 'physical activity', and 'burden' - emerged from the qualitative data. Both groups used similar weight maintenance strategies, but those in the WLM group experienced a higher burden, expressing effortful control which contrasted with the control group's confidence in their internal cues. Our results show an additional burden related with maintaining weight loss compared to keeping a stable normal weight. They provide evidence to devise interventions that will address the difficulty of regulating intake. © 2017 The Author(s) Published by S. Karger GmbH, Freiburg.
Take My Paradigm... Please! The Legacy of Kuhn's Construct in Educational Research
ERIC Educational Resources Information Center
Donmoyer, Robert
2006-01-01
Thomas Kuhn developed the construct of research paradigms to make sense of the history of conceptual change in the physical sciences. The construct has since been appropriated by a number of academic fields and by non-academics as well. This paper traces the use of the construct in the educational research field. The bulk of the paper is organized…
Spectral methods on arbitrary grids
NASA Technical Reports Server (NTRS)
Carpenter, Mark H.; Gottlieb, David
1995-01-01
Stable and spectrally accurate numerical methods are constructed on arbitrary grids for partial differential equations. These new methods are equivalent to conventional spectral methods but do not rely on specific grid distributions. Specifically, we show how to implement Legendre Galerkin, Legendre collocation, and Laguerre Galerkin methodology on arbitrary grids.
High speed capillary liquid chromatographic separations using a simple home made system constructed from readily available inexpensive components have been studied. Using thermally stable zirconia and titania based packing, the separation of eight alkylbenzene...
The Rechargeability of Silicon-Air Batteries
2012-06-01
demand the use of a more stable and accurate reference electrode. The method for constructing such an electrode was chosen to be based on the ferrocene ...three weeks-old electrode, as presented in figure 5b. These findings may be ascribed to some deterioration processes of ferrocene with
NASA Astrophysics Data System (ADS)
Laughton, C.
2008-12-01
For the last half century the physics community has increasingly turned to the use of underground space to conduct basic research. The community is currently planning to conduct a new generation of underground experiments at the Deep Underground Science and Engineering Laboratory (DUSEL). DUSEL will be constructed within the footprint of the defunct Homestake Gold Mine, located in Lead, South Dakota. Physics proposals call for the construction of new caverns in which to conduct major new experiments. Some of the proposed laboratory facilities will be significantly larger and deeper than any previously constructed. The talk will highlight possible opportunities for integrating multi-disciplinary research in to the cavern construction program, and will stress the need to work closely with design and construction contractors to ensure that research goals can be achieve with minimal impact on project work. The constructors of large caverns should be particularly receptive to, and encouraging of geoscience research that could improve the engineering characterization of the rock mass. An improved understanding of the rock mass, as the host construction material, would result in a more reliable cavern design and construction process, and a reduced construction risk to the Project.
Ropponen, Annina; Svedberg, Pia; Koskenvuo, Markku; Silventoinen, Karri; Kaprio, Jaakko
2014-06-01
Physical work loading and psychological stress commonly co-occur in working life, hence potentially having an interrelationship that may affect work incapacity. This prospective cohort study aimed to investigate the effect of stability and change in physical work loading and stress on the risk of disability pension (DP) due to musculoskeletal diagnoses (MSD), while accounting for familial confounding in these associations. Data on 12,455 twins born before 1958 were surveyed of their physical work loading and psychological stress of daily activities in 1975 and 1981. The follow-up data was collected from pension registers until 2004. Cox proportional hazards regression models were used. During the follow up, 893 participants were granted DP due to MSD. Stable high (hazard ratio, HR, 2.21), but also increased physical work loading (HR 2.05) and high psychological stress (HR 2.22) were associated with increased risk for DP, and had significant interaction (p=0.032). The associations were confirmed when accounting for several confounding factors. Stable high but also increased physical work loading and psychological stress of daily activities between two timepoints with 6 years apart confirms their predictive role for an increased risk of DP. Both physical work loading and psychological stress seem to be independent from various confounding factors hence suggesting direct effect on risk for DP providing potential for occupational health care to early identification of persons at risk. © 2014 the Nordic Societies of Public Health.
Free oscillations in a climate model with ice-sheet dynamics
NASA Technical Reports Server (NTRS)
Kallen, E.; Crafoord, C.; Ghil, M.
1979-01-01
A study of stable periodic solutions to a simple nonlinear model of the ocean-atmosphere-ice system is presented. The model has two dependent variables: ocean-atmosphere temperature and latitudinal extent of the ice cover. No explicit dependence on latitude is considered in the model. Hence all variables depend only on time and the model consists of a coupled set of nonlinear ordinary differential equations. The globally averaged ocean-atmosphere temperature in the model is governed by the radiation balance. The reflectivity to incoming solar radiation, i.e., the planetary albedo, includes separate contributions from sea ice and from continental ice sheets. The major physical mechanisms active in the model are (1) albedo-temperature feedback, (2) continental ice-sheet dynamics and (3) precipitation-rate variations. The model has three-equilibrium solutions, two of which are linearly unstable, while one is linearly stable. For some choices of parameters, the stability picture changes and sustained, finite-amplitude oscillations obtain around the previously stable equilibrium solution. The physical interpretation of these oscillations points to the possibility of internal mechanisms playing a role in glaciation cycles.
ERIC Educational Resources Information Center
Hoon, S. R.; Tanner, B. K.
1985-01-01
Basic physical concepts of importance in understanding magnetic fluids (fine ferromagnetic particles suspended in a liquid) are discussed. They include home-made magnetic fluids, stable magnetic fluids, and particle surfactants. (DH)
NASA Astrophysics Data System (ADS)
Sieroka, Norman
2018-02-01
This paper aims at closing a gap in recent Weyl research by investigating the role played by Leibniz for the development and consolidation of Weyl's notion of theoretical (symbolic) construction. For Weyl, just as for Leibniz, mathematics was not simply an accompanying tool when doing physics-for him it meant the ability to engage in well-guided speculations about a general framework of reality and experience. The paper first introduces some of the background of Weyl's notion of theoretical construction and then discusses particular Leibnizian inheritances in Weyl's 'Philosophie der Mathematik und Naturwissenschaft', such as the general appreciation of the principles of sufficient reason and of continuity. Afterwards the paper focuses on three themes: first, Leibniz's primary quality phenomenalism, which according to Weyl marked the decisive step in realizing that physical qualities are never apprehended directly; second, the conceptual relation between continuity and freedom; and third, Leibniz's notion of 'expression', which allows for a certain type of (surrogative) reasoning by structural analogy and which gave rise to Weyl's optimism regarding the scope of theoretical construction.
[Validity and reliability of a scale to assess self-efficacy for physical activity in elderly].
Borges, Rossana Arruda; Rech, Cassiano Ricardo; Meurer, Simone Teresinha; Benedetti, Tânia Rosane Bertoldo
2015-04-01
This study aimed to analyze the confirmatory factor validity and reliability of a self-efficacy scale for physical activity in a sample of 118 elderly (78% women) from 60 to 90 years of age. Mplus 6.1 was used to evaluate the confirmatory factor analysis. Reliability was tested by internal consistency and temporal stability. The original scale consisted of five items with dichotomous answers (yes/no), independently for walking and moderate and vigorous physical activity. The analysis excluded the item related to confidence in performing physical activities when on vacation. Two constructs were identified, called "self-efficacy for walking" and "self-efficacy for moderate and vigorous physical activity", with a factor load ≥ 0.50. Internal consistency was adequate both for walking (> 0.70) and moderate and vigorous physical activity (> 0.80), and temporal stability was adequate for all the items. In conclusion, the self-efficacy scale for physical activity showed adequate validity, reliability, and internal consistency for evaluating this construct in elderly Brazilians.
From Genes to Protein Mechanics on a Chip
Milles, Lukas F.; Verdorfer, Tobias; Pippig, Diana A.; Nash, Michael A.; Gaub, Hermann E.
2014-01-01
Single-molecule force spectroscopy enables mechanical testing of individual proteins, however low experimental throughput limits the ability to screen constructs in parallel. We describe a microfluidic platform for on-chip protein expression and measurement of single-molecule mechanical properties. We constructed microarrays of proteins covalently attached to a chip surface, and found that a single cohesin-modified cantilever that bound to the terminal dockerin-tag of each protein remained stable over thousands of pulling cycles. The ability to synthesize and mechanically probe protein libraries presents new opportunities for high-throughput mechanical phenotyping. PMID:25194847
No time machine construction in open 2+1 gravity with timelike total energy-momentum
NASA Astrophysics Data System (ADS)
Tiglio, Manuel H.
1998-09-01
It is shown that in (2+1)-dimensional gravity an open spacetime with timelike sources and total energy momentum cannot have a stable compactly generated Cauchy horizon. This constitutes a proof of a version of Kabat's conjecture and shows, in particular, that not only a Gott time machine cannot be formed from processes such as the decay of a single cosmic string as has been shown by Carroll et al., but that, in a precise sense, a time machine cannot be constructed at all.
Plan of production of MeV laser electron photons at SPring-8
NASA Astrophysics Data System (ADS)
Arimoto, Y.; Ohkuma, H.; Suzuki, S.; Tamura, K.; Kumagai, N.; Okajima, S.; Fujiwara, M.
2001-10-01
MeV photons at SPring-8 are produced by backward Compton scattering (BCS) of far infrared (FIR) laser photons from a 8 GeV electron beam. The MeV photons are a powerful probe to study nuclear physics, astro-nuclear physics, nuclear engineering, condensed matter physics, etc. owing to their attractive properties such as small emittance, high intensity, high polarization, etc. The 10 MeV photons which can be produced by the BCS process between the 8 GeV electron of SPring-8 storage ring and FIR laser photons with a wavelength of ~100 μm have a great advantage. Since energy loss of the electron due to the BCS process is smaller than energy acceptance of the storage ring (±160 MeV), the stored electron beam is not lost. A stable CO_2-pumped FIR laser with the wavelength of ~100 μm is practically using as a probe of plasma diagnostics at a nuclear fusion reactor. Furthermore, since the laser has many oscillations in wide wavelength region, the BCS photons in wide range can be obtained. We plan to produce the MeV laser electron photons by the BCS at SPring-8. For these purpose, we are now developing a high power CO_2-pumped FIR laser. Up to now ~1.5 watts CW laser action at a wavelength of 118.8 μm has been achieved. In this meeting, we will present a current status of the FIR laser system, a plan of construction of the test beam-line for the production of MeV photons at SPring-8, and future plan of this project.
18 CFR 367.24 - Construction and service contracts for other companies.
Code of Federal Regulations, 2010 CFR
2010-04-01
... service company undertakes projects to construct physical property for associate or non-associate... COMPANY ACT OF 2005, FEDERAL POWER ACT AND NATURAL GAS ACT UNIFORM SYSTEM OF ACCOUNTS FOR CENTRALIZED... POWER ACT AND NATURAL GAS ACT General Instructions § 367.24 Construction and service contracts for other...
ERIC Educational Resources Information Center
Patsopoulos, Dimitrios
2005-01-01
The different and contrasting versions of the etymology of the term "electricity" in Modern Greek textbooks of Physics of the 18th and 19th century, which are influenced by French and German textbooks, are not mere (re)constructions that serve the didactic purposes and objectives of their authors. They are (in)directly related to the social and…
NASA Astrophysics Data System (ADS)
Kuo, Eric; Hallinen, Nicole R.; Conlin, Luke D.
2017-05-01
One aim of school science instruction is to help students become adaptive problem solvers. Though successful at structuring novice problem solving, step-by-step problem-solving frameworks may also constrain students' thinking. This study utilises a paradigm established by Heckler [(2010). Some consequences of prompting novice physics students to construct force diagrams. International Journal of Science Education, 32(14), 1829-1851] to test how cuing the first step in a standard framework affects undergraduate students' approaches and evaluation of solutions in physics problem solving. Specifically, prompting the construction of a standard diagram before problem solving increases the use of standard procedures, decreasing the use of a conceptual shortcut. Providing a diagram prompt also lowers students' ratings of informal approaches to similar problems. These results suggest that reminding students to follow typical problem-solving frameworks limits their views of what counts as good problem solving.
G-theory: The generator of M-theory and supersymmetry
NASA Astrophysics Data System (ADS)
Sepehri, Alireza; Pincak, Richard
2018-04-01
In string theory with ten dimensions, all Dp-branes are constructed from D0-branes whose action has two-dimensional brackets of Lie 2-algebra. Also, in M-theory, with 11 dimensions, all Mp-branes are built from M0-branes whose action contains three-dimensional brackets of Lie 3-algebra. In these theories, the reason for difference between bosons and fermions is unclear and especially in M-theory there is not any stable object like stable M3-branes on which our universe would be formed on it and for this reason it cannot help us to explain cosmological events. For this reason, we construct G-theory with M dimensions whose branes are formed from G0-branes with N-dimensional brackets. In this theory, we assume that at the beginning there is nothing. Then, two energies, which differ in their signs only, emerge and produce 2M degrees of freedom. Each two degrees of freedom create a new dimension and then M dimensions emerge. M-N of these degrees of freedom are removed by symmetrically compacting half of M-N dimensions to produce Lie-N-algebra. In fact, each dimension produces a degree of freedom. Consequently, by compacting M-N dimensions from M dimensions, N dimensions and N degrees of freedom is emerged. These N degrees of freedoms produce Lie-N-algebra. During this compactification, some dimensions take extra i and are different from other dimensions, which are known as time coordinates. By this compactification, two types of branes, Gp and anti-Gp-branes, are produced and rank of tensor fields which live on them changes from zero to dimension of brane. The number of time coordinates, which are produced by negative energy in anti-Gp-branes, is more sensible to number of times in Gp-branes. These branes are compactified anti-symmetrically and then fermionic superpartners of bosonic fields emerge and supersymmetry is born. Some of gauge fields play the role of graviton and gravitino and produce the supergravity. The question may arise that what is the physical reason which shows that this theory is true. We shown that G-theory can be reduced to other theories like nonlinear gravity theories in four dimensions. Also, this theory, can explain the physical properties of fermions and bosons. On the other hand, this theory explains the origin of supersymmetry. For this reason, we can prove that this theory is true. By reducing the dimension of algebra to three and dimension of world to 11 and dimension of brane to four, G-theory is reduced to F(R)-gravity.
DOE Office of Scientific and Technical Information (OSTI.GOV)
None
Welcome, Luigi di Lella and Rolf Heuer-Design and Construction of the ISR, Kurt Hubner-Physics at small angles, Ugo Amaldi (TERA Foundation)-The Impact of the ISR on Accelerator Physics and Technology, Philip J. Bryant-Physics at high transverse momentum, Pierre Darriulat (VATLY-Hanoi). Concluding remarks, Rolf Heuer
Al-Adham, Ibrahim S I; Ashour, Hana; Al-Kaissi, Elham; Khalil, Enam; Kierans, Martin; Collier, Phillip J
2013-09-15
Microemulsions are physically stable oil/water clear dispersions, spontaneously formed and thermodynamically stable. They are composed in most cases of water, oil, surfactant and cosurfactant. Microemulsions are stable, self-preserving antimicrobial agents in their own right. The observed levels of antimicrobial activity associated with microemulsions may be due to the direct effect of the microemulsions themselves on the bacterial cytoplasmic membrane. The aim of this work is to study the growth behaviour of different microbes in presence of certain prepared physically stable microemulsion formulae over extended periods of time. An experiment was designed to study the kinetics of killing of a microemulsion preparation (17.3% Tween-80, 8.5% n-pentanol, 5% isopropyl myristate and 69.2% sterile distilled water) against selected test microorganisms (Candida albicans, Aspergillus niger, Schizosaccharomyces pombe and Rhodotorula spp.). Secondly, an experiment was designed to study the effects of the microemulsion preparation on the cytoplasmic membrane structure and function of selected fungal species by observation of 260 nm component leakage. Finally, the effects of the microemulsion on the fungal membrane structure and function using S. pombe were studied using transmission electron microscopy. The results showed that the prepared microemulsions are stable, effective antimicrobial systems with effective killing rates against C. albicans, A. niger, S. pombe and Rhodotorula spp. The results indicate a proposed mechanism of action of significant anti-membrane activity, resulting in the gross disturbance and dysfunction of the cytoplasmic membrane structure which is followed by cell wall modifications, cytoplasmic coagulation, disruption of intracellular metabolism and cell death. Copyright © 2013 Elsevier B.V. All rights reserved.
NASA Astrophysics Data System (ADS)
Suarez, C. A.; Kohn, M. J.
2013-12-01
Bioapatite in the form of vertebrate bone can be used for a wide variety of paleo-proxies, from determination of ancient diet to the isotopic composition of meteoric water. Bioapatite alteration during diagenesis is a constant barrier to the use of fossil bone as a paleo-proxy. To elucidate the physical and chemical alteration of bone apatite during fossilization, we analyzed an assortment of fossil bones of different ages for trace elements, using LA-ICP-MS, stable isotopes, and reflected IR spectroscopy. One set of fossil bones from the Pleistocene of Idaho show a diffusion recrystallization profile, however, rare earth element (REE) profiles indicate diffusion adsorption. This suggests that REE diffusion is controlled by changing (namely decreasing) boundary conditions (i.e. decreasing concentration of REE in surrounding pore fluids). Reflected IR analysis along this concentration profile reveal that areas high in U have lost type A carbonate from the crystal structure in addition to water and organics. Stable isotopic analysis of carbon and oxygen will determine what, if any, change in the isotopic composition of the carbonate component of apatite has occurred do to the diffusion and recrystallization process. Analysis of much older bone from the Cretaceous of China reveal shallow REE and U concentration profiles and very uniform reflected IR spectra with a significant loss of type A carbonate throughout the entire bone cortex. Analysis of stable isotopes through the bone cortex will be compared to the stable isotopes collected from the Pleistocene of Idaho.
Constructing a Stereographic Projection Model
ERIC Educational Resources Information Center
Lovett, D. R.; King, G. D.
1978-01-01
Explains how to construct a three dimensional model for stereographic projection. It will be suitable for presenting the symmetry of crystal systems, and will help physics students understand the nature of crystallography. (GA)
Striding Towards Better Physical Therapy
NASA Technical Reports Server (NTRS)
2003-01-01
This paper presents a discussion on a new rehabilitative device that promises to improve physical therapy for patients working to regain the ability to walk after facing traumatic injuries or a degenerative illness. Produced by Enduro Medical Technology, of East Hartford, Connecticut, the Secure Ambulation Module (S.A.M.) creates a stable and secure environment for patients as they stand during ambulation therapy.
Visible Spectrum of Stable Sonoluminescence
1992-12-01
Lawrence Livermore National Laboratory. 9. Interview between Dr. David S. Davis, Physics Department, Naval Postgraduate School, Monterey California, and the...December 1992. 11. B. P. Barber, R. Hiller, K. Arisaka, H. Fetterman , and S. J. Putterman, "Resolving the picosecond characteristics of synchronous...author, 12 November 1992. 14. Interview between Dr. David S. Davis, Physics Department, Naval Postgraduate School, Monterey California, and the author, 14
The physical characteristics of human proteins in different biological functions.
Wang, Tengjiao; Tang, Hailin
2017-01-01
The physical properties of gene products are the foundation of their biological functions. In this study, we systematically explored relationships between physical properties and biological functions. The physical properties including origin time, evolution pressure, mRNA and protein stability, molecular weight, hydrophobicity, acidity/alkaline, amino acid compositions, and chromosome location. The biological functions are defined from 4 aspects: biological process, molecular function, cellular component and cell/tissue/organ expression. We found that the proteins associated with basic material and energy metabolism process originated earlier, while the proteins associated with immune, neurological system process etc. originated later. Tissues may have a strong influence on evolution pressure. The proteins associated with energy metabolism are double-stable. Immune and peripheral cell proteins tend to be mRNA stable/protein unstable. There are very few function items with double-unstable of mRNA and protein. The proteins involved in the cell adhesion tend to consist of large proteins with high proportion of small amino acids. The proteins of organic acid transport, neurological system process and amine transport have significantly high hydrophobicity. Interestingly, the proteins involved in olfactory receptor activity tend to have high frequency of aromatic, sulfuric and hydroxyl amino acids.
The physical characteristics of human proteins in different biological functions
Tang, Hailin
2017-01-01
The physical properties of gene products are the foundation of their biological functions. In this study, we systematically explored relationships between physical properties and biological functions. The physical properties including origin time, evolution pressure, mRNA and protein stability, molecular weight, hydrophobicity, acidity/alkaline, amino acid compositions, and chromosome location. The biological functions are defined from 4 aspects: biological process, molecular function, cellular component and cell/tissue/organ expression. We found that the proteins associated with basic material and energy metabolism process originated earlier, while the proteins associated with immune, neurological system process etc. originated later. Tissues may have a strong influence on evolution pressure. The proteins associated with energy metabolism are double-stable. Immune and peripheral cell proteins tend to be mRNA stable/protein unstable. There are very few function items with double-unstable of mRNA and protein. The proteins involved in the cell adhesion tend to consist of large proteins with high proportion of small amino acids. The proteins of organic acid transport, neurological system process and amine transport have significantly high hydrophobicity. Interestingly, the proteins involved in olfactory receptor activity tend to have high frequency of aromatic, sulfuric and hydroxyl amino acids. PMID:28459865
DOE Office of Scientific and Technical Information (OSTI.GOV)
Neilson, G. H.; Heitzenroeder, P.; Lyon, J.
Stellarators use 3D plasma and magnetic field shaping to produce a steady-state disruption-free magnetic confinement configuration. Compact stellarators have additional attractive properties — quasi-symmetric magnetic fields and low aspect ratio. The National Compact Stellarator Experiment (NCSX) is being constructed at the Princeton Plasma Physics Laboratory (PPPL) in partnership with the Oak Ridge National Laboratory (ORNL) to test the physics of a high-beta compact stellarator with a lowripple, tokamak-like magnetic configuration. The engineering challenges of NCSX stem from its complex geometry requirements. These issues are addressed in the construction project through manufacturing R&D and system engineering. As a result, the fabricationmore » of the coil winding forms and vacuum vessel are proceeding in industry without significant technical issues, and preparations for winding the coils at PPPL are in place. Design integration, analysis, and dimensional control are functions provided by system engineering to ensure that the finished product will satisfy the physics requirements, especially accurate realization of the specified coil geometries. After completion of construction in 2009, a research program to test the expected physics benefits will start.« less
NASA Astrophysics Data System (ADS)
Schmidtke, Christian; Pöselt, Elmar; Ostermann, Johannes; Pietsch, Andrea; Kloust, Hauke; Tran, Huong; Schotten, Theo; Bastús, Neus G.; Eggers, Robin; Weller, Horst
2013-07-01
Nanoparticles (NPs) play an increasingly important role in biological labeling and imaging applications. However, preserving their useful properties in an aqueous biological environment remains challenging, even more as NPs therein have to be long-time stable, biocompatible and nontoxic. For in vivo applications, size control is crucial in order to route excretion pathways, e.g. renal clearance vs. hepato-biliary accumulation. Equally necessary, cellular and tissue specific targeting demands suitable linker chemistry for surface functionalization with affinity molecules, like peptides, proteins, carbohydrates and nucleotides. Herein, we report a three stage encapsulation process for NPs comprised of (1) a partial ligand exchange by a multidentate polyolefinic amine ligand, PI-N3, (2) micellar encapsulation with a precisely tuned amphiphilic diblock PI-b-PEG copolymer, in which the PI chains intercalate to the PI-N3 prepolymer and (3) radical cross-linking of the adjacent alkenyl bonds. As a result, water-soluble NPs were obtained, which virtually maintained their primal physical properties and were exceptionally stable in biological media. PEG-terminal functionalization of the diblock PI-b-PEG copolymer with numerous functional groups was mostly straightforward by chain termination of the living anionic polymerization (LAP) with the respective reagents. More complex affinity ligands, e.g. carbohydrates or biotin, were introduced in a two-step process, prior to micellar encapsulation. Advantageously, this pre-assembly approach opens up rapid access to precisely tuned multifunctional NPs, just by using mixtures of diverse functional PI-b-PEG polymers in a combinatorial manner. All constructs showed no toxicity from 0.001 to 1 μM (particle concentration) in standard WST and LDH assays on A549 cells, as well as only marginal unspecific cellular uptake, even in serum-free medium.Nanoparticles (NPs) play an increasingly important role in biological labeling and imaging applications. However, preserving their useful properties in an aqueous biological environment remains challenging, even more as NPs therein have to be long-time stable, biocompatible and nontoxic. For in vivo applications, size control is crucial in order to route excretion pathways, e.g. renal clearance vs. hepato-biliary accumulation. Equally necessary, cellular and tissue specific targeting demands suitable linker chemistry for surface functionalization with affinity molecules, like peptides, proteins, carbohydrates and nucleotides. Herein, we report a three stage encapsulation process for NPs comprised of (1) a partial ligand exchange by a multidentate polyolefinic amine ligand, PI-N3, (2) micellar encapsulation with a precisely tuned amphiphilic diblock PI-b-PEG copolymer, in which the PI chains intercalate to the PI-N3 prepolymer and (3) radical cross-linking of the adjacent alkenyl bonds. As a result, water-soluble NPs were obtained, which virtually maintained their primal physical properties and were exceptionally stable in biological media. PEG-terminal functionalization of the diblock PI-b-PEG copolymer with numerous functional groups was mostly straightforward by chain termination of the living anionic polymerization (LAP) with the respective reagents. More complex affinity ligands, e.g. carbohydrates or biotin, were introduced in a two-step process, prior to micellar encapsulation. Advantageously, this pre-assembly approach opens up rapid access to precisely tuned multifunctional NPs, just by using mixtures of diverse functional PI-b-PEG polymers in a combinatorial manner. All constructs showed no toxicity from 0.001 to 1 μM (particle concentration) in standard WST and LDH assays on A549 cells, as well as only marginal unspecific cellular uptake, even in serum-free medium. Electronic supplementary information (ESI) available: Images of the QDs, toxicity data and NMR spectra. See DOI: 10.1039/c3nr01520c
Abestos in Buildings: The State Role.
ERIC Educational Resources Information Center
Neilander, Dennis K.; Sacarto, Douglas M.
1988-01-01
The widespread use of asbestos for several decades in building construction has created major public health concerns for state governments. If asbestos is not thoroughly bound in cement, plaster, resin or some other stable material, it will flake and powder, releasing countless microscopic fibers into the air. Asbestos fibers penetrate deep into…
ERIC Educational Resources Information Center
Barnum, Dennis W.
1982-01-01
Potential-pH diagrams show the domains of redoxpotential and pH in which major species are most stable. Constructing such diagrams provides students with opportunities to decide what species must be considered, search literature for equilibrium constants and free energies of formation, and practice in using the Nernst equation. (Author/JN)
Linearly polarized fiber amplifier
Kliner, Dahv A.; Koplow, Jeffery P.
2004-11-30
Optically pumped rare-earth-doped polarizing fibers exhibit significantly higher gain for one linear polarization state than for the orthogonal state. Such a fiber can be used to construct a single-polarization fiber laser, amplifier, or amplified-spontaneous-emission (ASE) source without the need for additional optical components to obtain stable, linearly polarized operation.
DOT National Transportation Integrated Search
1991-05-01
The State-Trait Personality Inventory (STPI) is a self-report inventory which measures anxiety, curiosity, and anger (Spielberger, 1979). The three 'trait' scale scores are determined by the frequency of each emotion as stable personality constructs....