ERIC Educational Resources Information Center
Swinford, Ashleigh
2016-01-01
With rigor outlined in state and Common Core standards and the addition of constructed-response test items to most state tests, math constructed-response questions have become increasingly popular in today's classroom. Although constructed-response problems can present a challenge for students, they do offer a glimpse of students' learning through…
ERIC Educational Resources Information Center
Gadalla, Tahany M.
The equivalence of multiple-choice (MC) and constructed response (discrete) (CR-D) response formats as applied to mathematics computation at grade levels two to six was tested. The difference between total scores from the two response formats was tested for statistical significance, and the factor structure of items in both response formats was…
ERIC Educational Resources Information Center
Pollock, Judith M.; And Others
This report describes an experiment in constructed response testing undertaken in conjunction with the National Education Longitudinal Study of 1988 (NELS:88). Constructed response questions are those that require students to produce their own response rather than selecting the correct answer from several options. Participants in this experiment…
ERIC Educational Resources Information Center
Ito, Kyoko; Sykes, Robert C.
This study investigated the practice of weighting a type of test item, such as constructed response, more than other types of items, such as selected response, to compute student scores for a mixed-item type of test. The study used data from statewide writing field tests in grades 3, 5, and 8 and considered two contexts, that in which a single…
Sirota, Miroslav; Juanchich, Marie
2018-03-27
The Cognitive Reflection Test, measuring intuition inhibition and cognitive reflection, has become extremely popular because it reliably predicts reasoning performance, decision-making, and beliefs. Across studies, the response format of CRT items sometimes differs, based on the assumed construct equivalence of tests with open-ended versus multiple-choice items (the equivalence hypothesis). Evidence and theoretical reasons, however, suggest that the cognitive processes measured by these response formats and their associated performances might differ (the nonequivalence hypothesis). We tested the two hypotheses experimentally by assessing the performance in tests with different response formats and by comparing their predictive and construct validity. In a between-subjects experiment (n = 452), participants answered stem-equivalent CRT items in an open-ended, a two-option, or a four-option response format and then completed tasks on belief bias, denominator neglect, and paranormal beliefs (benchmark indicators of predictive validity), as well as on actively open-minded thinking and numeracy (benchmark indicators of construct validity). We found no significant differences between the three response formats in the numbers of correct responses, the numbers of intuitive responses (with the exception of the two-option version, which had a higher number than the other tests), and the correlational patterns of the indicators of predictive and construct validity. All three test versions were similarly reliable, but the multiple-choice formats were completed more quickly. We speculate that the specific nature of the CRT items helps build construct equivalence among the different response formats. We recommend using the validated multiple-choice version of the CRT presented here, particularly the four-option CRT, for practical and methodological reasons. Supplementary materials and data are available at https://osf.io/mzhyc/ .
A multi-agent safety response model in the construction industry.
Meliá, José L
2015-01-01
The construction industry is one of the sectors with the highest accident rates and the most serious accidents. A multi-agent safety response approach allows a useful diagnostic tool in order to understand factors affecting risk and accidents. The special features of the construction sector can influence the relationships among safety responses along the model of safety influences. The purpose of this paper is to test a model explaining risk and work-related accidents in the construction industry as a result of the safety responses of the organization, the supervisors, the co-workers and the worker. 374 construction employees belonging to 64 small Spanish construction companies working for two main companies participated in the study. Safety responses were measured using a 45-item Likert-type questionnaire. The structure of the measure was analyzed using factor analysis and the model of effects was tested using a structural equation model. Factor analysis clearly identifies the multi-agent safety dimensions hypothesized. The proposed safety response model of work-related accidents, involving construction specific results, showed a good fit. The multi-agent safety response approach to safety climate is a useful framework for the assessment of organizational and behavioral risks in construction.
ERIC Educational Resources Information Center
Boekkooi-Timminga, Ellen
Nine methods for automated test construction are described. All are based on the concepts of information from item response theory. Two general kinds of methods for the construction of parallel tests are presented: (1) sequential test design; and (2) simultaneous test design. Sequential design implies that the tests are constructed one after the…
Pharmacy Student Performance on Constructed-Response Versus Selected-Response Calculations Questions
Addo, Richard T.
2013-01-01
Objective. To introduce PharmD students to changes in calculations question types (constructed-response versus selected-response questions); measure and compare student performance on constructed-response and selected-response questions in a pharmaceutics course; and collect student feedback on the use of differing question types. Methods A pharmaceutics/pharmaceutical calculations examination was administered that included 15 pairs of questions; each pair consisted of a constructed-response question and a similar selected-response question. An online questionnaire was conducted to collect student feedback. Results. Of the 15 topics, the class scored higher on the constructed-response question for 4 topics and higher on the selected-response question for 10 topics. Eighty percent of the class preferred selected-response questions, although 47.8% felt constructed-response questions better prepared them for a career in healthcare. Conclusions. Students correctly answered more selected-response questions than constructed-response questions and felt more confident in doing so. Additional constructed-response teaching and testing methods should be incorporated into pharmacy education. PMID:23459503
ERIC Educational Resources Information Center
Livingston, Samuel A.; Rupp, Stacie L.
2004-01-01
Some previous research results imply that women tend to perform better, relative to men, on constructed-response (CR) tests than on multiple-choice (MC) tests in the same subjects. An analysis of data from several tests used in the licensing of beginning teachers supported this hypothesis, to varying degrees, in most of the tests investigated. The…
Violating Conventional Wisdom in Multiple Choice Test Construction
ERIC Educational Resources Information Center
Taylor, Annette Kujawski
2005-01-01
This research examined 2 elements of multiple-choice test construction, balancing the key and optimal number of options. In Experiment 1 the 3 conditions included a balanced key, overrepresentation of a and b responses, and overrepresentation of c and d responses. The results showed that error-patterns were independent of the key, reflecting…
ERIC Educational Resources Information Center
Choi, Seung W.; Podrabsky, Tracy; McKinney, Natalie
2012-01-01
Computerized adaptive testing (CAT) enables efficient and flexible measurement of latent constructs. The majority of educational and cognitive measurement constructs are based on dichotomous item response theory (IRT) models. An integral part of developing various components of a CAT system is conducting simulations using both known and empirical…
On the Equivalence of Constructed-Response and Multiple-Choice Tests.
ERIC Educational Resources Information Center
Traub, Ross E.; Fisher, Charles W.
Two sets of mathematical reasoning and two sets of verbal comprehension items were cast into each of three formats--constructed response, standard multiple-choice, and Coombs multiple-choice--in order to assess whether tests with indentical content but different formats measure the same attribute, except for possible differences in error variance…
A Study on the Impact of Fatigue on Human Raters When Scoring Speaking Responses
ERIC Educational Resources Information Center
Ling, Guangming; Mollaun, Pamela; Xi, Xiaoming
2014-01-01
The scoring of constructed responses may introduce construct-irrelevant factors to a test score and affect its validity and fairness. Fatigue is one of the factors that could negatively affect human performance in general, yet little is known about its effects on a human rater's scoring quality on constructed responses. In this study, we compared…
Automated essay scoring and the future of educational assessment in medical education.
Gierl, Mark J; Latifi, Syed; Lai, Hollis; Boulais, André-Philippe; De Champlain, André
2014-10-01
Constructed-response tasks, which range from short-answer tests to essay questions, are included in assessments of medical knowledge because they allow educators to measure students' ability to think, reason, solve complex problems, communicate and collaborate through their use of writing. However, constructed-response tasks are also costly to administer and challenging to score because they rely on human raters. One alternative to the manual scoring process is to integrate computer technology with writing assessment. The process of scoring written responses using computer programs is known as 'automated essay scoring' (AES). An AES system uses a computer program that builds a scoring model by extracting linguistic features from a constructed-response prompt that has been pre-scored by human raters and then, using machine learning algorithms, maps the linguistic features to the human scores so that the computer can be used to classify (i.e. score or grade) the responses of a new group of students. The accuracy of the score classification can be evaluated using different measures of agreement. Automated essay scoring provides a method for scoring constructed-response tests that complements the current use of selected-response testing in medical education. The method can serve medical educators by providing the summative scores required for high-stakes testing. It can also serve medical students by providing them with detailed feedback as part of a formative assessment process. Automated essay scoring systems yield scores that consistently agree with those of human raters at a level as high, if not higher, as the level of agreement among human raters themselves. The system offers medical educators many benefits for scoring constructed-response tasks, such as improving the consistency of scoring, reducing the time required for scoring and reporting, minimising the costs of scoring, and providing students with immediate feedback on constructed-response tasks. © 2014 John Wiley & Sons Ltd.
Item Construction and Psychometric Models Appropriate for Constructed Responses
1991-08-01
which involve only one attribute per item. This is especially true when we are dealing with constructed-response items, we have to measure much more...Service University of Ilinois Educacional Testing Service Rosedal Road Capign. IL 61801 Princeton. K3 08541 Princeton. N3 08541 Dr. Charles LeiS Dr
ERIC Educational Resources Information Center
Hendrickson, Amy; Patterson, Brian; Ewing, Maureen
2010-01-01
The psychometric considerations and challenges associated with including constructed response items on tests are discussed along with how these issues affect the form assembly specifications for mixed-format exams. Reliability and validity, security and fairness, pretesting, content and skills coverage, test length and timing, weights, statistical…
Using Automated Essay Scores as an Anchor When Equating Constructed Response Writing Tests
ERIC Educational Resources Information Center
Almond, Russell G.
2014-01-01
Assessments consisting of only a few extended constructed response items (essays) are not typically equated using anchor test designs as there are typically too few essay prompts in each form to allow for meaningful equating. This article explores the idea that output from an automated scoring program designed to measure writing fluency (a common…
The Effect of the Multiple-Choice Item Format on the Measurement of Knowledge of Language Structure
ERIC Educational Resources Information Center
Currie, Michael; Chiramanee, Thanyapa
2010-01-01
Noting the widespread use of multiple-choice items in tests in English language education in Thailand, this study compared their effect against that of constructed-response items. One hundred and fifty-two university undergraduates took a test of English structure first in constructed-response format, and later in three, stem-equivalent…
ERIC Educational Resources Information Center
Wu, Jason H.
2013-01-01
This study was designed to examine the construct of academic optimism and its relationship with collective responsibility in a sample of Taiwan elementary schools. The construct of academic optimism was tested using confirmatory factor analysis, and the whole structural model was tested with a structural equation modeling analysis. The data were…
Comparing Science Achievement Constructs: Targeted and Achieved
ERIC Educational Resources Information Center
Ferrara, Steve; Duncan, Teresa
2011-01-01
This article illustrates how test specifications based solely on academic content standards, without attention to other cognitive skills and item response demands, can fall short of their targeted constructs. First, the authors inductively describe the science achievement construct represented by a statewide sixth-grade science proficiency test.…
Bees Algorithm for Construction of Multiple Test Forms in E-Testing
ERIC Educational Resources Information Center
Songmuang, Pokpong; Ueno, Maomi
2011-01-01
The purpose of this research is to automatically construct multiple equivalent test forms that have equivalent qualities indicated by test information functions based on item response theory. There has been a trade-off in previous studies between the computational costs and the equivalent qualities of test forms. To alleviate this problem, we…
1990-05-01
curves ; test reports; test cylinders: samples, O&M manuals including parts lists; certifications; warranties and other such required submittals...purpose. 14.4.3. Authority and responsibilities of all quality control personnel. 14.4.4. Schedule of Use of inspection personnel by types and phase of...quality control program shall include four phases of inspection and tests. The Contracting Officer’s representative shall be notified at least 24
A Multivariate Multilevel Approach to the Modeling of Accuracy and Speed of Test Takers
ERIC Educational Resources Information Center
Klein Entink, R. H.; Fox, J. P.; van der Linden, W. J.
2009-01-01
Response times on test items are easily collected in modern computerized testing. When collecting both (binary) responses and (continuous) response times on test items, it is possible to measure the accuracy and speed of test takers. To study the relationships between these two constructs, the model is extended with a multivariate multilevel…
Kierkegaard, Marie; Petitclerc, Émilie; Hébert, Luc J; Mathieu, Jean; Gagnon, Cynthia
2018-02-28
To assess changes and responsiveness in outcome measures of mobility, balance, muscle strength and manual dexterity in adults with myotonic dystrophy type 1. A 9-year longitudinal study conducted with 113 patients. The responsiveness of the Timed Up and Go test, Berg Balance Scale, quantitative muscle testing, grip and pinch-grip strength, and Purdue Pegboard Test was assessed using criterion and construct approaches. Patient-reported perceived changes (worse/stable) in balance, walking, lower-limb weakness, stair-climbing and hand weakness were used as criteria. Predefined hypotheses about expected area under the receiver operating characteristic curves (criterion approach) and correlations between relative changes (construct approach) were explored. The direction and magnitude of median changes in outcome measures corresponded with patient-reported changes. Median changes in the Timed Up and Go test, grip strength, pinch-grip strength and Purdue Pegboard Test did not, in general, exceed known measurement errors. Most criterion (72%) and construct (70%) approach hypotheses were supported. Promising responsiveness was found for outcome measures of mobility, balance and muscle strength. Grip strength and manual dexterity measures showed poorer responsiveness. The performance-based outcome measures captured changes over the 9-year period and responsiveness was promising. Knowledge of measurement errors is needed to interpret the meaning of these longitudinal changes.
TEST BOOKLET FOR HIGH SCHOOL BIOLOGY, EXPERIMENTAL MATERIALS FOR USE 1966-1968.
ERIC Educational Resources Information Center
Biological Sciences Curriculum Study, Boulder, CO.
SUPPLEMENTARY TEST QUESTIONS FOR USE BY SECONDARY BIOLOGICAL SCIENCES CURRICULUM STUDY GREEN VERSION BIOLOGY TEACHERS IN THE CONSTRUCTION OF EXAMINATIONS ARE CONTAINED IN THIS EXPERIMENTAL MANUAL. THE ITEMS WERE PREPARED BY THE BIOLOGICAL SCIENCES CURRICULUM STUDY TEST CONSTRUCTION COMMITTEE IN RESPONSE TO TEACHER REQUESTS FOR SHORT-RANGE TESTS.…
ERIC Educational Resources Information Center
Stevenson, Claire E.; Heiser, Willem J.; Resing, Wilma C. M.
2016-01-01
Multiple-choice (MC) analogy items are often used in cognitive assessment. However, in dynamic testing, where the aim is to provide insight into potential for learning and the learning process, constructed-response (CR) items may be of benefit. This study investigated whether training with CR or MC items leads to differences in the strategy…
Construct-Driven SJTs: Toward an Agenda for Future Research
ERIC Educational Resources Information Center
Lievens, Filip
2017-01-01
A common theme running through recent research on Situational Judgment Tests (SJTs) and this special issue is the aim to improve the measurement of constructs via SJTs. Construct-driven SJTs differ from traditional SJTs in that they present a trait activating situation to test-takers and a more unidimensional set of response options that depict…
ERIC Educational Resources Information Center
Brom, Michael Wayde
2016-01-01
Studies have shown that test anxiety has become more prevalent since the adoption of the No Child Left Behind Act in 2001 and that test anxiety negatively affects student achievement. Early research viewed test anxiety as being a unidimensional construct; however, recent research has purported that test anxiety is a multidimensional construct.…
ERIC Educational Resources Information Center
Eleje, Lydia I.; Esomonu, Nkechi P. M.
2018-01-01
A Test to measure achievement in quantitative economics among secondary school students was developed and validated in this study. The test is made up 20 multiple choice test items constructed based on quantitative economics sub-skills. Six research questions guided the study. Preliminary validation was done by two experienced teachers in…
Evidence of Construct Validity in Published Achievement Tests.
ERIC Educational Resources Information Center
Nolet, Victor; Tindal, Gerald
Valid interpretation of test scores is the shared responsibility of the test designer and the test user. Test publishers must provide evidence of the validity of the decisions their tests are intended to support, while test users are responsible for analyzing this evidence and subsequently using the test in the manner indicated by the publisher.…
Linguistic Analysis of Constructed Student Responses in CAI.
ERIC Educational Resources Information Center
Simmons, Robert F.
Protosynthex III (PSIII) is a language processing system developed as an (as yet inadequate) experimental vehicle for testing student responses, with a view to constructing a model of an automated tutor. A version of the PLANIT system was modified so that a human tutor could be used to make instructional decisions in response to students'…
Developing a Strategy for Using Technology-Enhanced Items in Large-Scale Standardized Tests
ERIC Educational Resources Information Center
Bryant, William
2017-01-01
As large-scale standardized tests move from paper-based to computer-based delivery, opportunities arise for test developers to make use of items beyond traditional selected and constructed response types. Technology-enhanced items (TEIs) have the potential to provide advantages over conventional items, including broadening construct measurement,…
DOT National Transportation Integrated Search
1999-12-01
This manual has been developed as a training guide for field and laboratory technicians responsible for sampling and testing of soils used in roadway construction. Soils training and certification will increase the knowledge of laboratory, production...
NASA Astrophysics Data System (ADS)
Rahmaniar, Andinisa; Rusnayati, Heni; Sutiadi, Asep
2017-05-01
While solving physics problem particularly in force matter, it is needed to have the ability of constructing free body diagrams which can help students to analyse every force which acts on an object, the length of its vector and the naming of its force. Mix method was used to explain the result without any special treatment to participants. The participants were high school students in first grade totals 35 students. The purpose of this study is to identify students' ability level of constructing free body diagrams in solving restricted and structured response items. Considering of two types of test, every student would be classified into four levels ability of constructing free body diagrams which is every level has different characteristic and some students were interviewed while solving test in order to know how students solve the problem. The result showed students' ability of constructing free body diagrams on restricted response items about 34.86% included in no evidence of level, 24.11% inadequate level, 29.14% needs improvement level and 4.0% adequate level. On structured response items is about 16.59% included no evidence of level, 23.99% inadequate level, 36% needs improvement level, and 13.71% adequate level. Researcher found that students who constructed free body diagrams first and constructed free body diagrams correctly were more successful in solving restricted and structured response items.
ERIC Educational Resources Information Center
Tengberg, Michael
2017-01-01
Reading comprehension tests are often assumed to measure the same, or at least similar, constructs. Yet, reading is not a single but a multidimensional form of processing, which means that variations in terms of reading material and item design may emphasize one aspect of the construct at the cost of another. The educational systems in Denmark,…
ERIC Educational Resources Information Center
Tan, Xuan; Ricker, Kathryn L.; Puhan, Gautam
2010-01-01
This study examines the differences in equating outcomes between two trend score equating designs resulting from two different scoring strategies for trend scoring when operational constructed-response (CR) items are double-scored--the single group (SG) design, where each trend CR item is double-scored, and the nonequivalent groups with anchor…
2013-01-01
Background Despite the widespread use of multiple-choice assessments in medical education assessment, current practice and published advice concerning the number of response options remains equivocal. This article describes an empirical study contrasting the quality of three 60 item multiple-choice test forms within the Royal Australian and New Zealand College of Obstetricians and Gynaecologists (RANZCOG) Fetal Surveillance Education Program (FSEP). The three forms are described below. Methods The first form featured four response options per item. The second form featured three response options, having removed the least functioning option from each item in the four-option counterpart. The third test form was constructed by retaining the best performing version of each item from the first two test forms. It contained both three and four option items. Results Psychometric and educational factors were taken into account in formulating an approach to test construction for the FSEP. The four-option test performed better than the three-option test overall, but some items were improved by the removal of options. The mixed-option test demonstrated better measurement properties than the fixed-option tests, and has become the preferred test format in the FSEP program. The criteria used were reliability, errors of measurement and fit to the item response model. Conclusions The position taken is that decisions about the number of response options be made at the item level, with plausible options being added to complete each item on both psychometric and educational grounds rather than complying with a uniform policy. The point is to construct the better performing item in providing the best psychometric and educational information. PMID:23453056
Zoanetti, Nathan; Beaves, Mark; Griffin, Patrick; Wallace, Euan M
2013-03-04
Despite the widespread use of multiple-choice assessments in medical education assessment, current practice and published advice concerning the number of response options remains equivocal. This article describes an empirical study contrasting the quality of three 60 item multiple-choice test forms within the Royal Australian and New Zealand College of Obstetricians and Gynaecologists (RANZCOG) Fetal Surveillance Education Program (FSEP). The three forms are described below. The first form featured four response options per item. The second form featured three response options, having removed the least functioning option from each item in the four-option counterpart. The third test form was constructed by retaining the best performing version of each item from the first two test forms. It contained both three and four option items. Psychometric and educational factors were taken into account in formulating an approach to test construction for the FSEP. The four-option test performed better than the three-option test overall, but some items were improved by the removal of options. The mixed-option test demonstrated better measurement properties than the fixed-option tests, and has become the preferred test format in the FSEP program. The criteria used were reliability, errors of measurement and fit to the item response model. The position taken is that decisions about the number of response options be made at the item level, with plausible options being added to complete each item on both psychometric and educational grounds rather than complying with a uniform policy. The point is to construct the better performing item in providing the best psychometric and educational information.
2010-04-30
scrambled controls. Responsiveness was tested using luciferase activity of the 3TP reporter construct and normalized to renilla activity. Data points...was tested using luciferase activity of the TOP-flash reporter construct and normalized to renilla activity. Data points for fractionation and
Measurement Properties of Two Innovative Item Formats in a Computer-Based Test
ERIC Educational Resources Information Center
Wan, Lei; Henly, George A.
2012-01-01
Many innovative item formats have been proposed over the past decade, but little empirical research has been conducted on their measurement properties. This study examines the reliability, efficiency, and construct validity of two innovative item formats--the figural response (FR) and constructed response (CR) formats used in a K-12 computerized…
Developing and Evaluating a Machine-Scorable, Constrained Constructed-Response Item.
ERIC Educational Resources Information Center
Braun, Henry I.; And Others
The use of constructed response items in large scale standardized testing has been hampered by the costs and difficulties associated with obtaining reliable scores. The advent of expert systems may signal the eventual removal of this impediment. This study investigated the accuracy with which expert systems could score a new, non-multiple choice…
ERIC Educational Resources Information Center
Walker, Michael E.; Kim, Sooyeon
2010-01-01
This study examined the use of an all multiple-choice (MC) anchor for linking mixed format tests containing both MC and constructed-response (CR) items, in a nonequivalent groups design. An MC-only anchor could effectively link two such test forms if either (a) the MC and CR portions of the test measured the same construct, so that the MC anchor…
The Performance of IRT Model Selection Methods with Mixed-Format Tests
ERIC Educational Resources Information Center
Whittaker, Tiffany A.; Chang, Wanchen; Dodd, Barbara G.
2012-01-01
When tests consist of multiple-choice and constructed-response items, researchers are confronted with the question of which item response theory (IRT) model combination will appropriately represent the data collected from these mixed-format tests. This simulation study examined the performance of six model selection criteria, including the…
Trends in computer applications in science assessment
NASA Astrophysics Data System (ADS)
Kumar, David D.; Helgeson, Stanley L.
1995-03-01
Seven computer applications to science assessment are reviewed. Conventional test administration includes record keeping, grading, and managing test banks. Multiple-choice testing involves forced selection of an answer from a menu, whereas constructed-response testing involves options for students to present their answers within a set standard deviation. Adaptive testing attempts to individualize the test to minimize the number of items and time needed to assess a student's knowledge. Figurai response testing assesses science proficiency in pictorial or graphic mode and requires the student to construct a mental image rather than selecting a response from a multiple choice menu. Simulations have been found useful for performance assessment on a large-scale basis in part because they make it possible to independently specify different aspects of a real experiment. An emerging approach to performance assessment is solution pathway analysis, which permits the analysis of the steps a student takes in solving a problem. Virtually all computer-based testing systems improve the quality and efficiency of record keeping and data analysis.
NASA Technical Reports Server (NTRS)
Krishnamurthy, T.; Romero, V. J.
2002-01-01
The usefulness of piecewise polynomials with C1 and C2 derivative continuity for response surface construction method is examined. A Moving Least Squares (MLS) method is developed and compared with four other interpolation methods, including kriging. First the selected methods are applied and compared with one another in a two-design variables problem with a known theoretical response function. Next the methods are tested in a four-design variables problem from a reliability-based design application. In general the piecewise polynomial with higher order derivative continuity methods produce less error in the response prediction. The MLS method was found to be superior for response surface construction among the methods evaluated.
ERIC Educational Resources Information Center
Missouri State Dept. of Elementary and Secondary Education, Jefferson City.
This document presents 10 released items from the Health/Physical Education Missouri Assessment Program (MAP) test given in the spring of 2000 to fifth graders. Items from the test sessions include: selected-response (multiple choice), constructed-response, and a performance event. The selected-response items consist of individual questions…
A Validity-Based Approach to Quality Control and Assurance of Automated Scoring
ERIC Educational Resources Information Center
Bejar, Isaac I.
2011-01-01
Automated scoring of constructed responses is already operational in several testing programmes. However, as the methodology matures and the demand for the utilisation of constructed responses increases, the volume of automated scoring is likely to increase at a fast pace. Quality assurance and control of the scoring process will likely be more…
INFORMATION OR NOISE. AN INVESTIGATION OF RESPONSE ERRORS.
BEHAVIOR, SOCIAL PSYCHOLOGY), (* SOCIAL SCIENCES, SCIENTIFIC RESEARCH), PERFORMANCE(HUMAN), REACTION(PSYCHOLOGY), TEST CONSTRUCTION(PSYCHOLOGY), ATTITUDES(PSYCHOLOGY), MOTIVATION, PSYCHOLOGICAL TESTS, PUBLIC OPINION
Stanford L. Arner
1974-01-01
One procedure in analyzing the responses to factors in an experiment is to construct profiles of the means. Profiles are plots of the sample means of each level of one factor at each level of one or more of the other factors in the experiment. The construction of these profiles and tests of hypotheses about the mean responses is called profile analysis. This paper...
ERIC Educational Resources Information Center
Lee, Woo-yeol; Cho, Sun-Joo
2017-01-01
Cross-level invariance in a multilevel item response model can be investigated by testing whether the within-level item discriminations are equal to the between-level item discriminations. Testing the cross-level invariance assumption is important to understand constructs in multilevel data. However, in most multilevel item response model…
ERIC Educational Resources Information Center
Missouri State Dept. of Elementary and Secondary Education, Jefferson City.
This document presents 10 released items from the Health/Physical Education Missouri Assessment Program (MAP) test given in the spring of 2000 to ninth graders. Items from the test sessions include: selected-response (multiple choice), constructed-response, and a performance event. The selected-response items consist of individual questions…
The Trunk Impairment Scale - modified to ordinal scales in the Norwegian version.
Gjelsvik, Bente; Breivik, Kyrre; Verheyden, Geert; Smedal, Tori; Hofstad, Håkon; Strand, Liv Inger
2012-01-01
To translate the Trunk Impairment Scale (TIS), a measure of trunk control in patients after stroke, into Norwegian (TIS-NV), and to explore its construct validity, internal consistency, intertester and test-retest reliability. TIS was translated according to international guidelines. The validity study was performed on data from 201 patients with acute stroke. Fifty patients with stroke and acquired brain injury were recruited to examine intertester and test-retest reliability. Construct validity was analyzed with exploratory and confirmatory factor analysis and item response theory, internal consistency with Cronbach's alpha test, and intertester and test-retest reliability with kappa and intraclass correlation coefficient tests. The back-translated version of TIS-NV was validated by the original developer. The subscale Static sitting balance was removed. By combining items from the subscales Dynamic sitting balance and Coordination, six ordinal superitems (testlets) were constructed. The TIS-NV was renamed the modified TIS-NV (TIS-modNV). After modifications the TIS-modNV fitted well to a locally dependent unidimensional item response theory model. It demonstrated good construct validity, excellent internal consistency, and high intertester and test-retest reliability for the total score. This study supports that the TIS-modNV is a valid and reliable scale for use in clinical practice and research.
Prediction of barrier island restoration response and its interactions with the natural environment
NASA Astrophysics Data System (ADS)
Plant, N. G.; Stockdon, H. F.; Flocks, J.; Sallenger, A. H.; Long, J. W.; Cormier, J. M.; Guy, K.; Thompson, D. M.
2012-12-01
A 2-meter high sand berm was constructed along Chandeleur Island, Louisiana, in an attempt to provide protection against the Deepwater Horizon oil spill. Berm construction started in June 2010 and ended in April 2011. Variations in both island morphology and construction of the 15-km long berm resulted in the development of four different morphologies: a berm built on a submerged island platform to the north of the existing island, a berm built seaward of the existing island, a berm built along the island shoreline, and portions of the island where no berm was constructed. These different morphologies provide a natural laboratory for testing the understanding of berm and barrier island response to storms. In particular, the ability to predict berm evolution using statistical modeling of the interactions between the island, berm, and oceanographic processes was tested. This particular test was part of a broader USGS research effort to understand processes that bridge the gap between short-term storm response and longer-term geologic and climate interactions that shape barrier-island systems. Berm construction and subsequent berm and island evolution were monitored using satellite and aerial remote sensing and topographic and bathymetric surveys. To date, significant berm evolution occurred in both the north (including terminal erosion, overwash, and a large breach), center (overwash and numerous breaches), and south (overwash). The response of the central portion of the berm to winter and tropical storms was significant such that none of the residual berm remained within its construction footprint. The evolution of the central portion of the berm was well predicted using a statistical modeling approach that used predicted and modeled wave conditions to identify the likelihood of overwash events. Comparison of different modeled evolution scenarios to the one that was observed showed that berm response was sensitive to the frequency and severity of winter and tropical storms. These findings demonstrate an observation and modeling approach that can be applied to understanding and managing other natural and restored barrier islands.
Impact evaluation of composite floor sections
NASA Technical Reports Server (NTRS)
Boitnott, Richard L.; Fasanella, Edwin L.
1989-01-01
Graphite-epoxy floor sections representative of aircraft fuselage construction were statically and dynamically tested to evaluate their response to crash loadings. These floor sections were fabricated using a frame-stringer design typical of present aluminum aircraft without features to enhance crashworthiness. The floor sections were tested as part of a systematic research program developed to study the impact response of composite components of increasing complexity. The ultimate goal of the research program is to develop crashworthy design features for future composite aircraft. Initially, individual frames of six-foot diameter were tested both statically and dynamically. The frames were then used to construct built-up floor sections for dynamic tests at impact velocities of approximately 20 feet/sec to simulate survivable crash velocities. In addition, static tests were conducted to gain a better understanding of the failure mechanisms seen in the dynamic tests.
Li, Hong-Yan; Bi, Rui-Xue; Zhong, Qing-Ling
2017-12-01
Disaster nurse education has received increasing importance in China. Knowing the abilities of disaster response in undergraduate nursing students is beneficial to promote teaching and learning. However, there are few valid and reliable tools that measure the abilities of disaster response in undergraduate nursing students. To develop a self-report scale of self-efficacy in disaster response for Chinese undergraduate nursing students and test its psychometric properties. Nursing students (N=318) from two medical colleges were chosen by purposive sampling. The Disaster Response Self-Efficacy Scale (DRSES) was developed and psychometrically tested. Reliability and content validity were studied. Construct validity was tested by exploratory and confirmatory factor analysis. Reliability was tested by internal consistency and test-retest reliability. The DRSES consisted of 3 factors and 19 items with a 5-point rating. The content validity was 0.91, Cronbach's alpha coefficient was 0.912, and the intraclass correlation coefficient for test-retest reliability was 0.953. The construct validity was good (χ 2 /df=2.440, RMSEA=0.068, NFI=0.907, CFI=0.942, IFI=0.430, p<0.001). The newly developed DRSES has proven good reliability and validity. It could therefore be used as an assessment tool to evaluate self-efficacy in disaster response for Chinese undergraduate nursing students. Copyright © 2017. Published by Elsevier Ltd.
Government. Maryland High School Assessment.
ERIC Educational Resources Information Center
Maryland State Dept. of Education, Baltimore.
This document is a mostly multiple choice test for content given to Maryland high school students enrolled in a government course. The test is divided into 2 sessions, with 25 questions in session 1 and 56 questions in session 2. The multiple choice questions are designated as selected response questions. Other constructed response questions…
A PROJECTIVE TECHNIQUE FOR THE MEASUREMENT OF PATIENT ATTITUDES ON HOSPITAL WARDS.
MEDICAL PERSONNEL, TRAINING), (*PROJECTIVE TECHNIQUES, ATTITUDES(PSYCHOLOGY)), PSYCHOLOGICAL TESTS, ATTITUDES(PSYCHOLOGY), QUESTIONNAIRES, RESPONSE...BIOLOGY), RESEARCH MANAGEMENT, TEST CONSTRUCTION(PSYCHOLOGY), NURSES, MEDICAL TECHNICIANS
A signal detection-item response theory model for evaluating neuropsychological measures.
Thomas, Michael L; Brown, Gregory G; Gur, Ruben C; Moore, Tyler M; Patt, Virginie M; Risbrough, Victoria B; Baker, Dewleen G
2018-02-05
Models from signal detection theory are commonly used to score neuropsychological test data, especially tests of recognition memory. Here we show that certain item response theory models can be formulated as signal detection theory models, thus linking two complementary but distinct methodologies. We then use the approach to evaluate the validity (construct representation) of commonly used research measures, demonstrate the impact of conditional error on neuropsychological outcomes, and evaluate measurement bias. Signal detection-item response theory (SD-IRT) models were fitted to recognition memory data for words, faces, and objects. The sample consisted of U.S. Infantry Marines and Navy Corpsmen participating in the Marine Resiliency Study. Data comprised item responses to the Penn Face Memory Test (PFMT; N = 1,338), Penn Word Memory Test (PWMT; N = 1,331), and Visual Object Learning Test (VOLT; N = 1,249), and self-report of past head injury with loss of consciousness. SD-IRT models adequately fitted recognition memory item data across all modalities. Error varied systematically with ability estimates, and distributions of residuals from the regression of memory discrimination onto self-report of past head injury were positively skewed towards regions of larger measurement error. Analyses of differential item functioning revealed little evidence of systematic bias by level of education. SD-IRT models benefit from the measurement rigor of item response theory-which permits the modeling of item difficulty and examinee ability-and from signal detection theory-which provides an interpretive framework encompassing the experimentally validated constructs of memory discrimination and response bias. We used this approach to validate the construct representation of commonly used research measures and to demonstrate how nonoptimized item parameters can lead to erroneous conclusions when interpreting neuropsychological test data. Future work might include the development of computerized adaptive tests and integration with mixture and random-effects models.
Item response theory scoring and the detection of curvilinear relationships.
Carter, Nathan T; Dalal, Dev K; Guan, Li; LoPilato, Alexander C; Withrow, Scott A
2017-03-01
Psychologists are increasingly positing theories of behavior that suggest psychological constructs are curvilinearly related to outcomes. However, results from empirical tests for such curvilinear relations have been mixed. We propose that correctly identifying the response process underlying responses to measures is important for the accuracy of these tests. Indeed, past research has indicated that item responses to many self-report measures follow an ideal point response process-wherein respondents agree only to items that reflect their own standing on the measured variable-as opposed to a dominance process, wherein stronger agreement, regardless of item content, is always indicative of higher standing on the construct. We test whether item response theory (IRT) scoring appropriate for the underlying response process to self-report measures results in more accurate tests for curvilinearity. In 2 simulation studies, we show that, regardless of the underlying response process used to generate the data, using the traditional sum-score generally results in high Type 1 error rates or low power for detecting curvilinearity, depending on the distribution of item locations. With few exceptions, appropriate power and Type 1 error rates are achieved when dominance-based and ideal point-based IRT scoring are correctly used to score dominance and ideal point response data, respectively. We conclude that (a) researchers should be theory-guided when hypothesizing and testing for curvilinear relations; (b) correctly identifying whether responses follow an ideal point versus dominance process, particularly when items are not extreme is critical; and (c) IRT model-based scoring is crucial for accurate tests of curvilinearity. (PsycINFO Database Record (c) 2017 APA, all rights reserved).
ERIC Educational Resources Information Center
von Davier, Alina A.; Holland, Paul W.; Livingston, Samuel A.; Casabianca, Jodi; Grant, Mary C.; Martin, Kathleen
2006-01-01
This study examines how closely the kernel equating (KE) method (von Davier, Holland, & Thayer, 2004a) approximates the results of other observed-score equating methods--equipercentile and linear equatings. The study used pseudotests constructed of item responses from a real test to simulate three equating designs: an equivalent groups (EG)…
Harrison, Peter M C; Collins, Tom; Müllensiefen, Daniel
2017-06-15
Modern psychometric theory provides many useful tools for ability testing, such as item response theory, computerised adaptive testing, and automatic item generation. However, these techniques have yet to be integrated into mainstream psychological practice. This is unfortunate, because modern psychometric techniques can bring many benefits, including sophisticated reliability measures, improved construct validity, avoidance of exposure effects, and improved efficiency. In the present research we therefore use these techniques to develop a new test of a well-studied psychological capacity: melodic discrimination, the ability to detect differences between melodies. We calibrate and validate this test in a series of studies. Studies 1 and 2 respectively calibrate and validate an initial test version, while Studies 3 and 4 calibrate and validate an updated test version incorporating additional easy items. The results support the new test's viability, with evidence for strong reliability and construct validity. We discuss how these modern psychometric techniques may also be profitably applied to other areas of music psychology and psychological science in general.
Marcolina, Daniela; De Marzo, Nicoletta; Riccio, Maria Teresa
2011-01-01
Health impairment due to alcohol use and abuse is well known, in terms of relationship with traffic accidents and work accidents. In Italy almost 10 per cent of accidents at work involve intoxicated people injuring themselves and innocent victims. Alcohol abuse is a factor involved in determining severe accidents in the construction industry and epidemiological studies demonstrated a relationship between an elevated alcohol use and severity of accidents. Since in the Province of Belluno alcohol consumption may be elevated also at work, the two Occupational Health Units (SPISAL) in the province organized a campaign of information and surveillance against alcohol consumption at work in the construction industry. This report shows the campaign results, mainly in terms of breath alcohol tests performed in construction workers. After an extensive information campaign we inspected 50 sites, where 105 construction companies were at work, and tested 294 workers by breath alcohol test. No-one refused the test. Only 2.7% construction workers were positive for the breath alcohol test, and the levels were not elevated. This study shows that the construction workers in Belluno Province are responsible drinkers and are well aware of the policy of prohibition of alcohol consumption at work.
Applying Item Response Theory Methods to Examine the Impact of Different Response Formats
ERIC Educational Resources Information Center
Hohensinn, Christine; Kubinger, Klaus D.
2011-01-01
In aptitude and achievement tests, different response formats are usually used. A fundamental distinction must be made between the class of multiple-choice formats and the constructed response formats. Previous studies have examined the impact of different response formats applying traditional statistical approaches, but these influences can also…
Development of concrete QC/QA specifications for highway construction in Kentucky.
DOT National Transportation Integrated Search
2001-08-01
There is a growing trend toward quality-based specifications in highway construction. A large number of quality control/quality assurance (QC/QA) specifications shift the responsibility of day-to-day testing from the state DOH to the contractor. This...
Six1-Eya-Dach Network in Breast Cancer
2009-05-01
Ctrl scramble controls. Responsiveness was tested using luciferase activity of the 3TP reporter construct and normalized to renilla luciferase...construct and normalized to renilla luciferase activity. Data points show the mean of two individual clones from two experiments and error bars represent
Construction of a memory battery for computerized administration, using item response theory.
Ferreira, Aristides I; Almeida, Leandro S; Prieto, Gerardo
2012-10-01
In accordance with Item Response Theory, a computer memory battery with six tests was constructed for use in the Portuguese adult population. A factor analysis was conducted to assess the internal structure of the tests (N = 547 undergraduate students). According to the literature, several confirmatory factor models were evaluated. Results showed better fit of a model with two independent latent variables corresponding to verbal and non-verbal factors, reproducing the initial battery organization. Internal consistency reliability for the six tests were alpha = .72 to .89. IRT analyses (Rasch and partial credit models) yielded good Infit and Outfit measures and high precision for parameter estimation. The potential utility of these memory tasks for psychological research and practice willbe discussed.
Abma, Femke I; van der Klink, Jac J L; Bültmann, Ute
2013-03-01
The promotion of a sustainable, healthy and productive working life attracts more and more attention. Recently the Work Role Functioning Questionnaire (WRFQ) has been cross-culturally translated and adapted to Dutch. This questionnaire aims to measure the health-related work functioning of workers with health problems. The aim of this study is to evaluate the reliability, validity (including five new items) and responsiveness of the WRFQ 2.0 in the working population. A longitudinal study was conducted among workers. The reliability (internal consistency, test-retest reliability, measurement error), validity (structural validity-factor analysis, construct validity by means of hypotheses testing) and responsiveness of the WRFQ 2.0 were evaluated. A total of N = 553 workers completed the survey. The final WRFQ 2.0 has four subscales and showed very good internal consistency, moderate test-retest reliability, good construct validity and moderate responsiveness in the working population. The WRFQ was able to distinguish between groups with different levels of mental health, physical health, fatigue and need for recovery. A moderate correlation was found between WRFQ and related constructs respectively work ability and work productivity. A weak relationship was found with general self-rated health, work engagement and work involvement. The WRFQ 2.0 is a reliable and valid instrument to measure health-related work functioning in the working population. Further validation in larger samples is recommended, especially for test-retest reliability, responsiveness and the questionnaire's ability to predict the future course of health-related work functioning.
ERIC Educational Resources Information Center
Yao, Lihua; Schwarz, Richard D.
2006-01-01
Multidimensional item response theory (IRT) models have been proposed for better understanding the dimensional structure of data or to define diagnostic profiles of student learning. A compensatory multidimensional two-parameter partial credit model (M-2PPC) for constructed-response items is presented that is a generalization of those proposed to…
Covariates of the Rating Process in Hierarchical Models for Multiple Ratings of Test Items
ERIC Educational Resources Information Center
Mariano, Louis T.; Junker, Brian W.
2007-01-01
When constructed response test items are scored by more than one rater, the repeated ratings allow for the consideration of individual rater bias and variability in estimating student proficiency. Several hierarchical models based on item response theory have been introduced to model such effects. In this article, the authors demonstrate how these…
INTRODUCTION TO PATIENT-REPORTED OUTCOME ITEM BANKS: ISSUES IN MINORITY AGING RESEARCH
Templin, Thomas N; Hays, Ron D; Gershon, Richard C; Rothrock, Nan; Jones, Richard N; Teresi, Jeanne A; Stewart, Anita; Weech-Maldonado, Robert; Wallace, Steve
2014-01-01
In 2004 NIH awarded contracts to initiate the development of high quality psychological and neuropsychological outcome measures for improved assessment of health-related outcomes. The workshop introduced these measurement development initiatives, the measures created, and the NIH supported resource (Assessment Center) for internet or tablet-based test administration and scoring. Presentation covered: (a) item response theory (IRT) and assessment of test bias, (b) construction of item banks and computerized adaptive testing, and (c) the different ways in which qualitative analyses contribute to the definition of construct domains and the refinement of outcome constructs. The panel discussion included questions about representativeness of samples, and assessment of cultural bias. PMID:23570428
Psychometric Evaluation of the Ford Insomnia Response to Stress Test (FIRST) in Early Pregnancy.
Gelaye, Bizu; Zhong, Qiu-Yue; Barrios, Yasmin V; Redline, Susan; Drake, Christopher L; Williams, Michelle A
2016-04-15
To evaluate the construct validity and factor structure of the Spanish-language version of the Ford Insomnia Response to Stress Test questionnaire (FIRST-S) when used in early pregnancy. A cohort of 647 women were interviewed at ≤ 16 weeks of gestation to collect information regarding lifestyle, demographic, and sleep characteristics. The factorial structure of the FIRST-S was tested through exploratory and confirmatory factor analyses (EFA and CFA). Internal consistency and construct validity were also assessed by evaluating the association between the FIRST-S with symptoms of depression, anxiety, and sleep quality. Item response theory (IRT) analyses were conducted to complement classical test theory (CTT) analytic approaches. The mean score of the FIRST-S was 13.8 (range: 9-33). The results of the EFA showed that the FIRST-S contained a one-factor solution that accounted for 69.8% of the variance. The FIRST-S items showed good internal consistency (Cronbach α = 0.81). CFA results corroborated the one-factor structure finding from the EFA; and yielded measures indicating goodness of fit (comparative fit index of 0.902) and accuracy (root mean square error of approximation of 0.057). The FIRST-S had good construct validity as demonstrated by statistically significant associations of FIRST-S scores with sleep quality, antepartum depression and anxiety symptoms. Finally, results from IRT analyses suggested excellent item infit and outfit measures. The FIRST-S was found to have good construct validity and internal consistency for assessing vulnerability to insomnia during early pregnancy. © 2016 American Academy of Sleep Medicine.
On Validity Theory and Test Validation
ERIC Educational Resources Information Center
Sireci, Stephen G.
2007-01-01
Lissitz and Samuelsen (2007) propose a new framework for conceptualizing test validity that separates analysis of test properties from analysis of the construct measured. In response, the author of this article reviews fundamental characteristics of test validity, drawing largely from seminal writings as well as from the accepted standards. He…
10 CFR 50.59 - Changes, tests, and experiments.
Code of Federal Regulations, 2012 CFR
2012-01-01
... 10 Energy 1 2012-01-01 2012-01-01 false Changes, tests, and experiments. 50.59 Section 50.59..., Limitations, and Conditions of Licenses and Construction Permits § 50.59 Changes, tests, and experiments. (a... operator actions and response times). (6) Tests or experiments not described in the final safety analysis...
10 CFR 50.59 - Changes, tests, and experiments.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 10 Energy 1 2013-01-01 2013-01-01 false Changes, tests, and experiments. 50.59 Section 50.59..., Limitations, and Conditions of Licenses and Construction Permits § 50.59 Changes, tests, and experiments. (a... operator actions and response times). (6) Tests or experiments not described in the final safety analysis...
10 CFR 50.59 - Changes, tests, and experiments.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 10 Energy 1 2014-01-01 2014-01-01 false Changes, tests, and experiments. 50.59 Section 50.59..., Limitations, and Conditions of Licenses and Construction Permits § 50.59 Changes, tests, and experiments. (a... operator actions and response times). (6) Tests or experiments not described in the final safety analysis...
Dantlgraber, Michael; Wetzel, Eunike; Schützenberger, Petra; Stieger, Stefan; Reips, Ulf-Dietrich
2016-09-01
In psychological research, there is a growing interest in using latent class analysis (LCA) for the investigation of quantitative constructs. The aim of this study is to illustrate how LCA can be applied to gain insights on a construct and to select items during test development. We show the added benefits of LCA beyond factor-analytic methods, namely being able (1) to describe groups of participants that differ in their response patterns, (2) to determine appropriate cutoff values, (3) to evaluate items, and (4) to evaluate the relative importance of correlated factors. As an example, we investigated the construct of Facebook addiction using the Facebook Addiction Test (F-AT), an adapted version of the Internet Addiction Test (I-AT). Applying LCA facilitates the development of new tests and short forms of established tests. We present a short form of the F-AT based on the LCA results and validate the LCA approach and the short F-AT with several external criteria, such as chatting, reading newsfeeds, and posting status updates. Finally, we discuss the benefits of LCA for evaluating quantitative constructs in psychological research.
The Assignment of Raters to Items: Controlling for Rater Effects.
ERIC Educational Resources Information Center
Sykes, Robert C.; Heidorn, Mark; Lee, Guemin
A study was conducted to evaluate the effect of different modes (modalities) of assigning raters to test items. The impact on total constructed response (c.r.) score, and subsequently on total test score, of assigning a single versus multiple raters to an examination reading of a student's set of c.r. responses was evaluated for several mixed-item…
Constructing Multiple-Choice Items to Measure Higher-Order Thinking
ERIC Educational Resources Information Center
Scully, Darina
2017-01-01
Across education, certification and licensure, there are repeated calls for the development of assessments that target "higher-order thinking," as opposed to mere recall of facts. A common assumption is that this necessitates the use of constructed response or essay-style test questions; however, empirical evidence suggests that this may…
Constructing the Exact Significance Level for a Person-Fit Statistic.
ERIC Educational Resources Information Center
Liou, Michelle; Chang, Chih-Hsin
1992-01-01
An extension is proposed for the network algorithm introduced by C.R. Mehta and N.R. Patel to construct exact tail probabilities for testing the general hypothesis that item responses are distributed according to the Rasch model. A simulation study indicates the efficiency of the algorithm. (SLD)
Validation of the breast evaluation questionnaire for breast hypertrophy and breast reduction.
Lewin, Richard; Elander, Anna; Lundberg, Jonas; Hansson, Emma; Thorarinsson, Andri; Claudelin, Malin; Bladh, Helena; Lidén, Mattias
2018-06-13
There is a lack of published, validated questionnaires for evaluating psychosocial morbidity in patients with breast hypertrophy undergoing breast reduction surgery. To validate the breast evaluation questionnaire (BEQ), originally developed for the assessment of breast augmentation patients, for the assessment of psychosocial morbidity in patients with breast hypertrophy undergoing breast reduction surgery. Validation study Subjects: Women with macromastia Methods: The validation of the BEQ, adapted to breast reduction, was performed in several steps. Content validity, reliability, construct validity and responsiveness were assessed. The original version was adjusted according to the results for content validity and resulted in item reduction and a modified BEQ (mBEQ) that was then assessed for reliability, construct validity and responsiveness. Internal and external validation was performed for the modified BEQ. Convergent validity was tested against Breast-Q (reduction) and discriminate validity was tested against the SF-36. Known-groups validation revealed significant differences between the normal population and patients undergoing breast reduction surgery. The BEQ showed good reliability by test-re-test analysis and high responsiveness. The modified BEQ may be reliable, valid and responsive instrument for assessing women who undergo breast reduction.
ERIC Educational Resources Information Center
Wehrens, Maike J. P. W.; Buunk, Abraham P.; Lubbers, Miranda J.; Dijkstra, Pieternel; Kuyper, Hans; van der Werf, Greetje P. C.
2010-01-01
The goal of the present study was to study the relationship between affective responses to social comparison and test scores among high school students. Our analyses showed that three types of responses to social comparison could be distinguished: an empathic, constructive, and destructive response. Whereas girls scored higher on empathic…
Evaluating Statistical Targets for Assembling Parallel Mixed-Format Test Forms
ERIC Educational Resources Information Center
Debeer, Dries; Ali, Usama S.; van Rijn, Peter W.
2017-01-01
Test assembly is the process of selecting items from an item pool to form one or more new test forms. Often new test forms are constructed to be parallel with an existing (or an ideal) test. Within the context of item response theory, the test information function (TIF) or the test characteristic curve (TCC) are commonly used as statistical…
Latent constructs underlying sensory subtypes in children with autism: A preliminary study.
Hand, Brittany N; Dennis, Simon; Lane, Alison E
2017-08-01
Recent reports identify sensory subtypes in ASD based on shared patterns of responses to daily sensory stimuli [Ausderau et al., 2014; Lane, Molloy, & Bishop, 2014]. Lane et al. propose that two broad sensory dimensions, sensory reactivity and multisensory integration, best explain the differences between subtypes, however this has yet to be tested. The present study tests this hypothesis by examining the latent constructs underlying Lane's sensory subtypes. Participants for this study were caregivers of children with autism spectrum disorder (ASD) aged 2-12 years. Caregiver responses on the Short Sensory Profile (SSP), used to establish Lane's sensory subtypes, were extracted from two existing datasets (total n = 287). Independent component analyses were conducted to test the fit and interpretability of a two-construct structure underlying the SSP, and therefore, the sensory subtypes. The first construct was largely comprised of the taste/smell sensitivity domain, which describes hyper-reactivity to taste and smell stimuli. The second construct had a significant contribution from the low energy/weak domain, which describes behaviors that may be indicative of difficulties with multisensory integration. Findings provide initial support for our hypothesis that sensory reactivity and multisensory integration underlie Lane's sensory subtypes in ASD. Autism Res 2017, 10: 1364-1371. © 2017 International Society for Autism Research, Wiley Periodicals, Inc. © 2017 International Society for Autism Research, Wiley Periodicals, Inc.
Motivational Responses to Fitness Testing by Award Status and Gender
ERIC Educational Resources Information Center
Domangue, Elizabeth; Solmon, Melinda
2010-01-01
Fitness testing is a prominent element in many physical education programs, but there has been limited investigation concerning motivation constructs associated with the testing. This study investigated the relationships among physical education students' award status and gender to achievement goals, intrinsic motivation, and intentions. After…
Bourion-Bédès, Stéphanie; Schwan, Raymund; Epstein, Jonathan; Laprevote, Vincent; Bédès, Alex; Bonnet, Jean-Louis; Baumann, Cédric
2015-02-01
The study aimed to examine the construct validity and reliability of the Quality of Life Enjoyment and Satisfaction Questionnaire-Short Form (Q-LES-Q-SF) according to both classical test and item response theories. The psychometric properties of the French version of this instrument were investigated in a cross-sectional, multicenter study. A total of 124 outpatients with a substance dependence diagnosis participated in the study. Psychometric evaluation included descriptive analysis, internal consistency, test-retest reliability, and validity. The dimensionality of the instrument was explored using a combination of the classical test, confirmatory factor analysis (CFA), and an item response theory analysis, the Person Separation Index (PSI), in a complementary manner. The results of the Q-LES-Q-SF revealed that the questionnaire was easy to administer and the acceptability was good. The internal consistency and the test-retest reliability were 0.9 and 0.88, respectively. All items were significantly correlated with the total score and the SF-12 used in the study. The CFA with one factor model was good, and for the unidimensional construct, the PSI was found to be 0.902. The French version of the Q-LES-Q-SF yielded valid and reliable clinical assessments of the quality of life for future research and clinical practice involving French substance abusers. In response to recent questioning regarding the unidimensionality or bidimensionality of the instrument and according to the underlying theoretical unidimensional construct used for its development, this study suggests the Q-LES-Q-SF as a one-dimension questionnaire in French QoL studies.
A High-Lift Building Block Flow: Turbulent Boundary Layer Relaminarization
NASA Technical Reports Server (NTRS)
Bourassa, Corey; Thomas, Flint O.; Nelson, Robert C.
2001-01-01
A working wind tunnel test facility has been constructed at the University of Notre Dame's Hessert Center. The relaminarization test facility has been constructed in the 1.5m x 1.5m (5ft x 5 ft) atmospheric wind tunnel and generates a Re(theta)=4694 turbulent boundary layer in nominally zero-pressure gradient before it is exposed to the Case #1 pressure gradient (K approximately equal to 4.2 x 10(exp -6), which is believed to be sufficient to achieve relaminarization. Future work to be conducted will include measuring the response of the turbulent boundary layer to the favorable pressure gradients created in the test facility and documenting this response in order to understand the underlying flow physics responsible for relaminarization. It is the goal of this research to have a better understanding of accelerated turbulent boundary layers which will aid in the development of future flow diagnostic utilities to be implemented in applied aerodynamic research.
An Extension of IRT-Based Equating to the Dichotomous Testlet Response Theory Model
ERIC Educational Resources Information Center
Tao, Wei; Cao, Yi
2016-01-01
Current procedures for equating number-correct scores using traditional item response theory (IRT) methods assume local independence. However, when tests are constructed using testlets, one concern is the violation of the local item independence assumption. The testlet response theory (TRT) model is one way to accommodate local item dependence.…
Cognitive Diagnostic Models for Tests with Multiple-Choice and Constructed-Response Items
ERIC Educational Resources Information Center
Kuo, Bor-Chen; Chen, Chun-Hua; Yang, Chih-Wei; Mok, Magdalena Mo Ching
2016-01-01
Traditionally, teachers evaluate students' abilities via their total test scores. Recently, cognitive diagnostic models (CDMs) have begun to provide information about the presence or absence of students' skills or misconceptions. Nevertheless, CDMs are typically applied to tests with multiple-choice (MC) items, which provide less diagnostic…
ERIC Educational Resources Information Center
Yan, Duanli; Lewis, Charles; Stocking, Martha
It is unrealistic to suppose that standard item response theory (IRT) models will be appropriate for all new and currently considered computer-based tests. In addition to developing new models, researchers will need to give some attention to the possibility of constructing and analyzing new tests without the aid of strong models. Computerized…
Mathematics Competency Test: User's Manual.
ERIC Educational Resources Information Center
Vernon, P. E.; And Others
The Mathematics Competency Test is a 46-question written test assessing mathematics achievement for groups or individuals aged 11 to adult. It is suitable for use with groups or individuals in school, college and workplace contexts. The questions are open-ended and require constructed responses rather than recognition of a correct answer in a…
Rater Cognition: Implications for Validity
ERIC Educational Resources Information Center
Bejar, Issac I.
2012-01-01
The scoring process is critical in the validation of tests that rely on constructed responses. Documenting that readers carry out the scoring in ways consistent with the construct and measurement goals is an important aspect of score validity. In this article, rater cognition is approached as a source of support for a validity argument for scores…
The reliability and validity of the SF-8 with a conflict-affected population in northern Uganda.
Roberts, Bayard; Browne, John; Ocaka, Kaducu Felix; Oyok, Thomas; Sondorp, Egbert
2008-12-02
The SF-8 is a health-related quality of life instrument that could provide a useful means of assessing general physical and mental health amongst populations affected by conflict. The purpose of this study was to test the validity and reliability of the SF-8 with a conflict-affected population in northern Uganda. A cross-sectional multi-staged, random cluster survey was conducted with 1206 adults in camps for internally displaced persons in Gulu and Amuru districts of northern Uganda. Data quality was assessed by analysing the number of incomplete responses to SF-8 items. Response distribution was analysed using aggregate endorsement frequency. Test-retest reliability was assessed in a separate smaller survey using the intraclass correlation test. Construct validity was measured using principal component analysis, and the Pearson Correlation test for item-summary score correlation and inter-instrument correlations. Known groups validity was assessed using a two sample t-test to evaluates the ability of the SF-8 to discriminate between groups known to have, and not have, physical and mental health problems. The SF-8 showed excellent data quality. It showed acceptable item response distribution based upon analysis of aggregate endorsement frequencies. Test-retest showed a good intraclass correlation of 0.61 for PCS and 0.68 for MCS. The principal component analysis indicated strong construct validity and concurred with the results of the validity tests by the SF-8 developers. The SF-8 also showed strong construct validity between the 8 items and PCS and MCS summary score, moderate inter-instrument validity, and strong known groups validity. This study provides evidence on the reliability and validity of the SF-8 amongst IDPs in northern Uganda.
The reliability and validity of the SF-8 with a conflict-affected population in northern Uganda
Roberts, Bayard; Browne, John; Ocaka, Kaducu Felix; Oyok, Thomas; Sondorp, Egbert
2008-01-01
Background The SF-8 is a health-related quality of life instrument that could provide a useful means of assessing general physical and mental health amongst populations affected by conflict. The purpose of this study was to test the validity and reliability of the SF-8 with a conflict-affected population in northern Uganda. Methods A cross-sectional multi-staged, random cluster survey was conducted with 1206 adults in camps for internally displaced persons in Gulu and Amuru districts of northern Uganda. Data quality was assessed by analysing the number of incomplete responses to SF-8 items. Response distribution was analysed using aggregate endorsement frequency. Test-retest reliability was assessed in a separate smaller survey using the intraclass correlation test. Construct validity was measured using principal component analysis, and the Pearson Correlation test for item-summary score correlation and inter-instrument correlations. Known groups validity was assessed using a two sample t-test to evaluates the ability of the SF-8 to discriminate between groups known to have, and not have, physical and mental health problems. Results The SF-8 showed excellent data quality. It showed acceptable item response distribution based upon analysis of aggregate endorsement frequencies. Test-retest showed a good intraclass correlation of 0.61 for PCS and 0.68 for MCS. The principal component analysis indicated strong construct validity and concurred with the results of the validity tests by the SF-8 developers. The SF-8 also showed strong construct validity between the 8 items and PCS and MCS summary score, moderate inter-instrument validity, and strong known groups validity. Conclusion This study provides evidence on the reliability and validity of the SF-8 amongst IDPs in northern Uganda. PMID:19055716
Design, construction, and evaluation of a 1:8 scale model binaural manikin.
Robinson, Philip; Xiang, Ning
2013-03-01
Many experiments in architectural acoustics require presenting listeners with simulations of different rooms to compare. Acoustic scale modeling is a feasible means to create accurate simulations of many rooms at reasonable cost. A critical component in a scale model room simulation is a receiver that properly emulates a human receiver. For this purpose, a scale model artificial head has been constructed and tested. This paper presents the design and construction methods used, proper equalization procedures, and measurements of its response. A headphone listening experiment examining sound externalization with various reflection conditions is presented that demonstrates its use for psycho-acoustic testing.
Construction and In Vivo Testing of Prokaryotic Riboregulators.
Green, Alexander A
2017-01-01
RNAs that are transcribed and self-assemble within living cells are valuable tools for regulating and organizing cellular activities. Riboregulators, in particular, have been widely used for modulating translation and transcription in response to cognate transactivating or trigger RNAs, enabling cells to evaluate logic operations and to respond to environmental cues. Herein we detail a set of methods for the rapid construction and testing of prokaryotic riboregulators in Escherichia coli. These methods enable construction of dozens of riboregulator plasmids at the same time without the use of restriction enzymes. Furthermore, they facilitate rapid screening of devices and can be applied to a variety of other self-assembling in vivo RNA systems.
Samoylov, Alexandre; Cochran, Anna; Schemera, Bettina; Kutzler, Michelle; Donovan, Caitlin; Petrenko, Valery; Bartol, Frank; Samoylova, Tatiana
2015-12-20
Phage display is based on genetic engineering of phage coat proteins resulting in fusion peptides displayed on the surface of phage particles. The technology is widely used for generation of phages with novel characteristics for numerous applications in biomedicine and far beyond. The focus of this study was on development of phage-peptide constructs that stimulate production of antibodies against gonadotropin releasing hormone (GnRH). Phage-peptide constructs that elicit production of neutralizing GnRH antibodies can be used for anti-fertility and anti-cancer applications. Phage-GnRH constructs were generated via selection from a phage display library using several types of GnRH antibodies as selection targets. Such phage constructs were characterized for sequence similarities to GnRH peptide and frequency of their occurrence in the selection rounds. Five of the constructs with suitable characteristics were tested in mice as a single dose 5×10(11) virions (vir) vaccine and were found to be able to stimulate production of GnRH-specific antibodies, but not to suppress testosterone (indirect indicator of GnRH antibody neutralizing properties). Next, one of the constructs was tested at a higher dose of 2×10(12) vir per mouse in combination with a poly(lactide-co-glycolide) (PLGA)-based adjuvant. This resulted in multifold increase in GnRH antibody production and significant reduction of serum testosterone, indicating that antibodies produced in response to the phage-GnRH immunization possess neutralizing properties. To achieve optimal immune responses for desired applications, phage-GnRH constructs can be modified with respect to flanking sequences of GnRH-like peptides displayed on phage. Anticipated therapeutic effects also might be attained using optimized phage doses, a combination of several constructs in a single treatment, or application of adjuvants and advanced phage delivery systems. Copyright © 2015 Elsevier B.V. All rights reserved.
Lee, Michael J; Dumonski, Mark; Phillips, Frank M; Voronov, Leonard I; Renner, Susan M; Carandang, Gerard; Havey, Robert M; Patwardhan, Avinash G
2011-11-01
A cadaveric biomechanical study. To investigate the biomechanical behavior of the cervical spine after cervical total disc replacement (TDR) adjacent to a fusion as compared to a two-level fusion. There are concerns regarding the biomechanical effects of cervical fusion on the mobile motion segments. Although previous biomechanical studies have demonstrated that cervical disc replacement normalizes adjacent segment motion, there is a little information regarding the function of a cervical disc replacement adjacent to an anterior cervical decompression and fusion, a potentially common clinical application. Nine cadaveric cervical spines (C3-T1, age: 60.2 ± 3.5 years) were tested under load- and displacement-control testing. After intact testing, a simulated fusion was performed at C4-C5, followed by C6-C7. The simulated fusion was then reversed, and the response of TDR at C5-C6 was measured. A hybrid construct was then tested with the TDR either below or above a single-level fusion and contrasted with a simulated two-level fusion (C4-C6 and C5-C7). The external fixator device used to simulate fusion significantly reduced range of motion (ROM) at C4-C5 and C6-C7 by 74.7 ± 8.1% and 78.1 ± 11.5%, respectively (P < 0.05). Removal of the fusion construct restored the motion response of the spinal segments to their intact state. Arthroplasty performed at C5-C6 using the porous-coated motion disc prosthesis maintained the total flexion-extension ROM to the level of the intact controls when used as a stand-alone procedure or when implanted adjacent to a single-level fusion (P > 0.05). The location of the single-level fusion, whether above or below the arthroplasty, did not significantly affect the motion response of the arthroplasty in the hybrid construct. Performing a two-level fusion significantly increased the motion demands on the nonoperated segments as compared to a hybrid TDR-plus fusion construct when the spine was required to reach the same motion end points. The spine with a hybrid construct required significantly less extension moment than the spine with a two-level fusion to reach the same extension end point. The porous-coated motion cervical prosthesis restored the ROM of the treated level to the intact state. When the porous-coated motion prosthesis was used in a hybrid construct, the TDR response was not adversely affected. A hybrid construct seems to offer significant biomechanical advantages over two-level fusion in terms of reducing compensatory adjacent-level hypermobility and also loads required to achieve a predetermined ROM.
1984-01-01
working drawings, lists, and miscellaneous information needed for construction and testing (fig. 4). Detail design and construction in- cludes...still in test and evaluation phases, and is currently operational on a CDC computer. Its approach to management of geometric data is a unique and...been to provide the high degree of engineering user flexibility and yet achieve acceptable response times. In late 1983, a test system which has user
Construction and response of a highly granular scintillator-based electromagnetic calorimeter
NASA Astrophysics Data System (ADS)
Repond, J.; Xia, L.; Eigen, G.; Price, T.; Watson, N. K.; Winter, A.; Thomson, M. A.; Cârloganu, C.; Blazey, G. C.; Dyshkant, A.; Francis, K.; Zutshi, V.; Gadow, K.; Göttlicher, P.; Hartbrich, O.; Kotera, K.; Krivan, F.; Krüger, K.; Lu, S.; Lutz, B.; Reinecke, M.; Sefkow, F.; Sudo, Y.; Tran, H. L.; Kaplan, A.; Schultz-Coulon, H.-Ch.; Bilki, B.; Northacker, D.; Onel, Y.; Wilson, G. W.; Kawagoe, K.; Sekiya, I.; Suehara, T.; Yamashiro, H.; Yoshioka, T.; Alamillo, E. Calvo; Fouz, M. C.; Marin, J.; Navarrete, J.; Pelayo, J. Puerta; Verdugo, A.; Chadeeva, M.; Danilov, M.; Gabriel, M.; Goecke, P.; Graf, C.; Israeli, Y.; Kolk, N. Van Der; Simon, F.; Szalay, M.; Windel, H.; Bilokin, S.; Bonis, J.; Pöschl, R.; Thiebault, A.; Richard, F.; Zerwas, D.; Balagura, V.; Boudry, V.; Brient, J.-C.; Cornat, R.; Cvach, J.; Janata, M.; Kovalcuk, M.; Kvasnicka, J.; Polak, I.; Smolik, J.; Vrba, V.; Zalesak, J.; Zuklin, J.; Choi, W.; Kotera, K.; Nishiyama, M.; Sakuma, T.; Takeshita, T.; Tozuka, S.; Tsubokawa, T.; Uozumi, S.; Jeans, D.; Ootani, W.; Liu, L.; Chang, S.; Khan, A.; Kim, D. H.; Kong, D. J.; Oh, Y. D.; Ikuno, T.; Sudo, Y.; Takahashi, Y.; Götze, M.; Calice Collaboration
2018-04-01
A highly granular electromagnetic calorimeter with scintillator strip readout is being developed for future linear collider experiments. A prototype of 21.5 X0 depth and 180 × 180mm2 transverse dimensions was constructed, consisting of 2160 individually read out 10 × 45 × 3mm3 scintillator strips. This prototype was tested using electrons of 2-32 GeV at the Fermilab Test Beam Facility in 2009. Deviations from linear energy response were less than 1.1%, and the intrinsic energy resolution was determined to be (12 . 5 ± 0 . 1(stat.) ± 0 . 4(syst.)) % /√{ E [ GeV ] } ⊕(1.2 ± 0.1 (stat.)-0.7+0.6 (syst.)) %, where the uncertainties correspond to statistical and systematic sources, respectively.
Field instrumentation and measured response of the I-295 cable-stayed bridge.
DOT National Transportation Integrated Search
1992-01-01
This first report describes the results of a field study of the live load responses of a segmentally constructed prestressed concrete cable-stayed bridge. The main span of the test structure consists of twin box girders connected by delta frames. Kno...
Analysis of pavement response data and use of nondestructive testing for improving pavement design.
DOT National Transportation Integrated Search
2006-08-01
The first fully instrumented flexible pavement test section in Maine was constructed in Fall, 2005. This paper presents : the description of the instruments, their installation, and analysis of temperature and stress-strain data collected so far. : T...
An Alternative Methodology for Creating Parallel Test Forms Using the IRT Information Function.
ERIC Educational Resources Information Center
Ackerman, Terry A.
The purpose of this paper is to report results on the development of a new computer-assisted methodology for creating parallel test forms using the item response theory (IRT) information function. Recently, several researchers have approached test construction from a mathematical programming perspective. However, these procedures require…
The Construction of a Long Variable of Conceptual Development in Social Education.
ERIC Educational Resources Information Center
Doig, Brian
This paper demonstrates a method for constructing long variables using items that elicit partically correct responses across ages. Long variables may be defined by students at different ages (year levels) attempting common items within a test containing other items considered to be appropriate for each age or year level. A developmental model of…
Development and mechanical properties of construction materials from lunar simulants
NASA Technical Reports Server (NTRS)
Desai, Chandra S.
1990-01-01
The development of construction materials such as concrete from lunar soils without the use of water requires a different methodology than that used for conventional terrestrial concrete. Currently, this research involves two aspects: (1) liquefaction of lunar simulants with various additives in a furnace so as to produce a construction material like an intermediate ceramic; and (2) cyclic loading of simulant with different initial vacuums and densities with respect to the theoretical maximum densities (TMD). In both cases, bending, triaxial compression, extension, and hydrostatic tests will be performed to define the stress-strain strength response of the resulting materials. In the case of the intermediate ceramic, bending and available multiaxial test devices will be used, while for the compacted case, tests will be performed directly in the new device. The tests will be performed by simulating in situ confining conditions. A preliminary review of high-purity metal is also conducted.
Factors affecting the implementation of green specifications in construction.
Lam, Patrick T I; Chan, Edwin H W; Poon, C S; Chau, C K; Chun, K P
2010-01-01
Green specifications constitute one of the important elements in green construction. New sustainability requirements and changing priorities in construction management have spurred the emerging green specifications to a faster pace of development. A cross-sectional survey has been conducted in Hong Kong in 2007 to identify principal factors leading to the success of preparing green specifications. Based on extensive construction management literature, 20 variables concerning sustainable construction were summarized. Using the Mann-Whitney U-test, the subtle differences between stakeholders in specifying construction work have been detected even with the high consistency of the responses among the groups. Moreover, five independent factors for successful specification of green construction have been categorized by factor analysis. They are related to (1) green technology and techniques, (2) reliability and quality of specification, (3) leadership and responsibility, (4) stakeholder involvement, and (5) guide and benchmarking systems. Whilst the first and fourth factors are generally more important, different stakeholder groups have different emphases. The results of the survey have been validated against established principles. 2009 Elsevier Ltd. All rights reserved.
Testing of aircraft passenger seat cushion material, full scale. Data, volume 2
NASA Technical Reports Server (NTRS)
Schutter, K. J.; Gaume, J. G.; Duskin, F. E.
1980-01-01
Burn characteristics of presently used and proposed seat cushion materials and types of constructions were determined. Eight different seat cushion configurations were subjected to full scale burn tests. Each cushion configuration was tested twice for a total of 16 tests. Two different fire sources were used: Jet A-fuel for eight tests, and a radiant energy source with propane flame for eight tests. Data were recorded for smoke density, cushion temperatures, radiant heat flux, animal response to combustion products, rate of weight loss of test specimens, cabin temperature, and type and content of gas within the cabin. When compared to existing seat cushions, the test specimens incorporating a fire barrier and those fabricated from advanced materials, using improved construction methods, exhibited significantly greater fire resistance. Flammability comparison tests were conducted upon one fire blocking configuration and one polyimide configuration.
Singh, Amika S; Vik, Froydis N; Chinapaw, Mai J M; Uijtdewilligen, Léonie; Verloigne, Maïté; Fernández-Alvira, Juan M; Stomfai, Sarolta; Manios, Yannis; Martens, Marloes; Brug, Johannes
2011-12-09
Insight in children's energy balance-related behaviours (EBRBs) and their determinants is important to inform obesity prevention research. Therefore, reliable and valid tools to measure these variables in large-scale population research are needed. To examine the test-retest reliability and construct validity of the child questionnaire used in the ENERGY-project, measuring EBRBs and their potential determinants among 10-12 year old children. We collected data among 10-12 year old children (n = 730 in the test-retest reliability study; n = 96 in the construct validity study) in six European countries, i.e. Belgium, Greece, Hungary, the Netherlands, Norway, and Spain. Test-retest reliability was assessed using the intra-class correlation coefficient (ICC) and percentage agreement comparing scores from two measurements, administered one week apart. To assess construct validity, the agreement between questionnaire responses and a subsequent face-to-face interview was assessed using ICC and percentage agreement. Of the 150 questionnaire items, 115 (77%) showed good to excellent test-retest reliability as indicated by ICCs > .60 or percentage agreement ≥ 75%. Test-retest reliability was moderate for 34 items (23%) and poor for one item. Construct validity appeared to be good to excellent for 70 (47%) of the 150 items, as indicated by ICCs > .60 or percentage agreement ≥ 75%. From the other 80 items, construct validity was moderate for 39 (26%) and poor for 41 items (27%). Our results demonstrate that the ENERGY-child questionnaire, assessing EBRBs of the child as well as personal, family, and school-environmental determinants related to these EBRBs, has good test-retest reliability and moderate to good construct validity for the large majority of items.
2011-01-01
Background Insight in children's energy balance-related behaviours (EBRBs) and their determinants is important to inform obesity prevention research. Therefore, reliable and valid tools to measure these variables in large-scale population research are needed. Objective To examine the test-retest reliability and construct validity of the child questionnaire used in the ENERGY-project, measuring EBRBs and their potential determinants among 10-12 year old children. Methods We collected data among 10-12 year old children (n = 730 in the test-retest reliability study; n = 96 in the construct validity study) in six European countries, i.e. Belgium, Greece, Hungary, the Netherlands, Norway, and Spain. Test-retest reliability was assessed using the intra-class correlation coefficient (ICC) and percentage agreement comparing scores from two measurements, administered one week apart. To assess construct validity, the agreement between questionnaire responses and a subsequent face-to-face interview was assessed using ICC and percentage agreement. Results Of the 150 questionnaire items, 115 (77%) showed good to excellent test-retest reliability as indicated by ICCs > .60 or percentage agreement ≥ 75%. Test-retest reliability was moderate for 34 items (23%) and poor for one item. Construct validity appeared to be good to excellent for 70 (47%) of the 150 items, as indicated by ICCs > .60 or percentage agreement ≥ 75%. From the other 80 items, construct validity was moderate for 39 (26%) and poor for 41 items (27%). Conclusions Our results demonstrate that the ENERGY-child questionnaire, assessing EBRBs of the child as well as personal, family, and school-environmental determinants related to these EBRBs, has good test-retest reliability and moderate to good construct validity for the large majority of items. PMID:22152048
A Quasi-Parametric Method for Fitting Flexible Item Response Functions
ERIC Educational Resources Information Center
Liang, Longjuan; Browne, Michael W.
2015-01-01
If standard two-parameter item response functions are employed in the analysis of a test with some newly constructed items, it can be expected that, for some items, the item response function (IRF) will not fit the data well. This lack of fit can also occur when standard IRFs are fitted to personality or psychopathology items. When investigating…
Developing Multiple Choice Tests: Tips & Techniques
ERIC Educational Resources Information Center
McCowan, Richard J.
1999-01-01
Item writing is a major responsibility of trainers. Too often, qualified staff who prepare lessons carefully and teach conscientiously use inadequate tests that do not validly reflect the true level of trainee achievement. This monograph describes techniques for constructing multiple-choice items that measure student performance accurately. It…
[Design and validation of a questionnaire for psychosocial nursing diagnosis in Primary Care].
Brito-Brito, Pedro Ruymán; Rodríguez-Álvarez, Cristobalina; Sierra-López, Antonio; Rodríguez-Gómez, José Ángel; Aguirre-Jaime, Armando
2012-01-01
To develop a valid, reliable and easy-to-use questionnaire for a psychosocial nursing diagnosis. The study was performed in two phases: first phase, questionnaire design and construction; second phase, validity and reliability tests. A bank of items was constructed using the NANDA classification as a theoretical framework. Each item was assigned a Likert scale or dichotomous response. The combination of responses to the items constituted the diagnostic rules to assign up to 28 labels. A group of experts carried out the validity test for content. Other validated scales were used as reference standards for the criterion validity tests. Forty-five nurses provided the questionnaire to the patients on three separate occasions over a period of three weeks, and the other validated scales only once to 188 randomly selected patients in Primary Care centres in Tenerife (Spain). Validity tests for construct confirmed the six dimensions of the questionnaire with 91% of total variance explained. Validity tests for criterion showed a specificity of 66%-100%, and showed high correlations with the reference scales when the questionnaire was assigning nursing diagnoses. Reliability tests showed agreement of 56%-91% (P<.001), and a 93% internal consistency. The Questionnaire for Psychosocial Nursing Diagnosis was called CdePS, and included 61 items. The CdePS is a valid, reliable and easy-to-use tool in Primary Care centres to improve the assigning of a psychosocial nursing diagnosis. Copyright © 2011 Elsevier España, S.L. All rights reserved.
ERIC Educational Resources Information Center
van der Linden, Wim J.; Boekkooi-Timminga, Ellen
A "maximin" model for item response theory based test design is proposed. In this model only the relative shape of the target test information function is specified. It serves as a constraint subject to which a linear programming algorithm maximizes the information in the test. In the practice of test construction there may be several…
ERIC Educational Resources Information Center
Wang, Wei
2013-01-01
Mixed-format tests containing both multiple-choice (MC) items and constructed-response (CR) items are now widely used in many testing programs. Mixed-format tests often are considered to be superior to tests containing only MC items although the use of multiple item formats leads to measurement challenges in the context of equating conducted under…
Automatic Generation of Rasch-Calibrated Items: Figural Matrices Test GEOM and Endless-Loops Test EC
ERIC Educational Resources Information Center
Arendasy, Martin
2005-01-01
The future of test construction for certain psychological ability domains that can be analyzed well in a structured manner may lie--at the very least for reasons of test security--in the field of automatic item generation. In this context, a question that has not been explicitly addressed is whether it is possible to embed an item response theory…
ERIC Educational Resources Information Center
Paek, Insu; Park, Hyun-Jeong; Cai, Li; Chi, Eunlim
2014-01-01
Typically a longitudinal growth modeling based on item response theory (IRT) requires repeated measures data from a single group with the same test design. If operational or item exposure problems are present, the same test may not be employed to collect data for longitudinal analyses and tests at multiple time points are constructed with unique…
Ramsay-Curve Differential Item Functioning
ERIC Educational Resources Information Center
Woods, Carol M.
2011-01-01
Differential item functioning (DIF) occurs when an item on a test, questionnaire, or interview has different measurement properties for one group of people versus another, irrespective of true group-mean differences on the constructs being measured. This article is focused on item response theory based likelihood ratio testing for DIF (IRT-LR or…
A Simple Soil Percolation Test Device for Field Environmentalists
ERIC Educational Resources Information Center
Smith, William H.; Stark, Phillip E.
1977-01-01
A primary responsibility of field environmental health workers is evaluation of individual sewage disposal system sites. The authors of this article developed a practical, accurate, and inexpensive measurement device for obtaining reliable percolation test results. Directions for the construction and use of the device are detailed. Drawings…
The development of an instrument to assess chemistry perceptions
NASA Astrophysics Data System (ADS)
Wells, Raymond R.
The instrument, developed in this study, attempted to correct the deficiencies of previous instruments. Statements of belief and opinion can be validly included under the construct of chemistry perceptions. Further, statements that might be better characterized as science attitudes, math attitudes, or attitudes toward a specific course or program were not included. Eliminating statements of math anxiety and test anxiety insured that responses to statements of anxiety were perceptions of anxiety solely related to chemistry. The results of the expert judges' responses to the Validation of Proposed Perception Statements forms were detailed to establish construct and content validity. The nature of Likert scale construction and calculation of internal consistency also supported the validity of the instrument. A pilot Chemistry Perception Questionnaire (CPQ) was then constructed based on agreement of the appropriate subscale and mean importance of the perception statements. The pilot CPQ results were subjected to an item analysis based on three sets of statistics: the frequency of each response and the percentage of respondents making each response for each perception statement, the mean and standard deviations for each item, and the item discrimination index which correlated the item scores with the subscale scores. With no zero or negative correlations to the subscale scores, it was not necessary to replace any of the perception statements contained in the pilot instrument. Therefore, the piloted Chemistry Perception Questionnaire became the final instrument. Factor analysis confirmed the multidimensionality of the instrument. The instrument was administered twice with a separation interval of approximately one month in order to perform a test-retest reliability analysis. One hundred and forty-one pairs were matched and results detailed. The correlation between forms, for the total instrument, was 0.9342. The mean coefficient alpha, for the total instrument, was 0.9495. With test-retest correlations and alphas exceeding 0.70 for all seven subscales and the total instrument, it was determined that the Chemistry Perception Questionnaire instrument achieved reasonably high reliability estimations.
Composite Bending Box Section Modal Vibration Fault Detection
NASA Technical Reports Server (NTRS)
Werlink, Rudy
2002-01-01
One of the primary concerns with Composite construction in critical structures such as wings and stabilizers is that hidden faults and cracks can develop operationally. In the real world, catastrophic sudden failure can result from these undetected faults in composite structures. Vibration data incorporating a broad frequency modal approach, could detect significant changes prior to failure. The purpose of this report is to investigate the usefulness of frequency mode testing before and after bending and torsion loading on a composite bending Box Test section. This test article is representative of construction techniques being developed for the recent NASA Blended Wing Body Low Speed Vehicle Project. The Box section represents the construction technique on the proposed blended wing aircraft. Modal testing using an impact hammer provides an frequency fingerprint before and after bending and torsional loading. If a significant structural discontinuity develops, the vibration response is expected to change. The limitations of the data will be evaluated for future use as a non-destructive in-situ method of assessing hidden damage in similarly constructed composite wing assemblies. Modal vibration fault detection sensitivity to band-width, location and axis will be investigated. Do the sensor accelerometers need to be near the fault and or in the same axis? The response data used in this report was recorded at 17 locations using tri-axial accelerometers. The modal tests were conducted following 5 independent loading conditions before load to failure and 2 following load to failure over a period of 6 weeks. Redundant data was used to minimize effects from uncontrolled variables which could lead to incorrect interpretations. It will be shown that vibrational modes detected failure at many locations when skin de-bonding failures occurred near the center section. Important considerations are the axis selected and frequency range.
Feletto, Eleonora; Wilson, Laura Kate; Roberts, Alison Sarah; Benrimoj, Shalom Isaac
2011-03-01
Community pharmacy is undergoing transformation with increasing pressure to build its capacity to deliver cognitive pharmaceutical services ("services"). The theoretical framework of organizational flexibility (OF) may be used to assess the capacity of community pharmacy to implement change programs and guide capacity-building initiatives. To test the applicability of an existing scale measuring OF to the industry of community pharmacy in Australia. A mail survey was used to test a preexisting scale measuring OF amended from 28 items to 20 items testing 3 underlying factors of operational, structural, and strategic flexibility in the Australian community pharmacy context. The sample was 2006 randomly-stratified community pharmacies. A confirmatory factor analysis was conducted to assess the validity and reliability of the 1-factor models for each underlying construct and the full measurement model. Responses were received from a total of 395 (19.7%) community pharmacies. The 1-factor models of operational, structural, and strategic flexibility fit the data with appropriate respecification. Overall, the favorable fit of the individual factor constructs suggested that the multiple-factor measurement model should be tested. However, this model did not yield an interpretable response. Operational flexibility covaried negatively to the other factors, whereas structural and strategic flexibility shared covariance. Despite this, the results highlighting the individual factor fit suggest the constructs have application to pharmacy. The individual OF constructs were useful in the development and initial testing of a scale adapted for community pharmacy. When further developed and validated, the scale could be used to identify group of pharmacies that require individualized assistance to build capacity and integrate services and other new endeavors. Copyright © 2011 Elsevier Inc. All rights reserved.
The Work Instability Scale for Rheumatoid Arthritis (RA-WIS): Does it work in osteoarthritis?
Tang, Kenneth; Beaton, Dorcas E; Lacaille, Diane; Gignac, Monique A M; Zhang, Wei; Anis, Aslam H; Bombardier, Claire
2010-09-01
To validate the 23-item Work Instability Scale for Rheumatoid Arthritis (RA-WIS) for use in osteoarthritis (OA) using both classical test theory and item response theory approaches. Baseline and 12-month follow-up data were collected from workers with OA recruited from community and clinical settings (n = 130). Fit of RA-WIS data to the Rasch model was evaluated by item- and person-fit statistics (size of residual, chi-sq), assessments of differential item functioning, and tests of unidimensionality and local independence. Internal consistency was assessed by KR-20. Convergent construct validity (Spearman r, known-groups) was evaluated against theoretical constructs that assess impact of health on work. Responsiveness to global indicators of change was assessed by standardized response means (SRM) and area under the receiver operating characteristic curves. Data structure of the RA-WIS showed adequate fit to the Rasch model (chi-sq = 83.2, P = 0.03) after addressing local dependency in three item pairs by creating testlets. High internal consistency (KR-20 = 0.93) and convergent validity with work-oriented constructs (|r| = 0.55-0.77) were evident. The RA-WIS correlated most strongly with the concept of illness intrusiveness (r = 0.77) and was highly responsive to changes (SRM = 1.05 [deterioration]; -0.78 [improvement]). Although developed for RA, the RA-WIS is psychometrically sound for OA and demonstrates interval-level property.
Learning, Retention, and Forgetting of Newton's Third Law throughout University Physics
ERIC Educational Resources Information Center
Sayre, Eleanor C.; Franklin, Scott V.; Dymek, Stephanie; Clark, Jessica; Sun, Yifei
2012-01-01
We present data from a between-student study on student response to questions on Newton's third law given in two introductory calculus-based physics classes (Mechanics and Electromagnetism) at a large northeastern university. Construction of a response curve reveals subtle dynamics in student learning not capturable by pretesting and post-testing.…
ERIC Educational Resources Information Center
Samejima, Fumiko
In latent trait theory the latent space, or space of the hypothetical construct, is usually represented by some unidimensional or multi-dimensional continuum of real numbers. Like the latent space, the item response can either be treated as a discrete variable or as a continuous variable. Latent trait theory relates the item response to the latent…
ERIC Educational Resources Information Center
Polat, Ozgul; Dagal, Asude B.
2013-01-01
This study is aimed at developing a scale (Parents' Evaluation of Responsible Behaviors of 5-6 Year Old Children) for measuring parents' evaluation of their 5-6 year-old children's responsible behaviors. The construct validity of the scale was tested by Factor Analysis. Factor analysis determined that the scale can be clustered under 10 factors.…
Annual Progress Report, FY 1980, 1 October 1979 - 30 September 1980,
1980-10-01
coordinating an integrated pest management program, and constructing initial pilot prototypes, test models, and pro- ducing limited quantities of medical...Screening Test Based on the Ventilatory Responses of Fish . . . . . . . a & a . . . . 25 Chemistry and Molecular Biology of the Disinfection Process...Sink Unit, Surgical, Field (NSN 6545-00-935-4056), Engineering Evaluation of . . . . . . . . . . . . . . . . . . 69 Technical Feasibility Testing (TFT
Negahban, Hossein; Mohtasebi, Elham; Goharpey, Shahin
2015-01-01
The aim of this methodological study was to cross-culturally translate the Shoulder Activity Scale (SAS) into the Persian and determine its clinimetric properties including reliability, validity, and responsiveness in patients with shoulder disorders. Persian version of the SAS was obtained after standard forward-backward translation. Three questionnaires were completed by the respondents: SAS, shoulder pain and disability index (SPADI), and Short-Form 36 Health Survey (SF-36). The patients completed the SAS, 1 week after the first visit to evaluate the test-retest reliability. Construct validity was evaluated by examining the associations between the scores on the SAS and the scores obtained from the SPADI, SF-36, and age of the patients. To assess responsiveness, data were collected in the first visit and then again after 4 weeks physiotherapy intervention. Test-retest reliability and internal consistency were assessed using Intra-class Correlation Coefficient (ICC) and Cronbach's alpha, respectively. To evaluate construct validity, Spearman's rank correlation was used. The ability of the SAS to detect changes was evaluated by the receiver-operating characteristics method. No problem or language difficulties were reported during translation process. Test-retest reliability of the SAS was excellent with an ICC of 0.98. Also, the marginal Cronbach's alpha level of 0.64 was obtained. The correlation between the SAS and the SPADI was low, proving divergent validity, whereas the correlations between the SAS and the SF-36/age were moderate proving convergent validity. A marginally acceptable responsiveness was achieved for the Persian SAS. The study provides some evidences to support the test-retest reliability, internal consistency, construct validity, and responsiveness of the Persian version of the SAS in patients with shoulder disorders. Therefore, it seems that this instrument is a useful measure of shoulder activity level in research setting and clinical practice. The shoulder activity scale (SAS) is a reliable, valid, and responsive measure of shoulder activity level in Persian-speaking patients with different shoulder disorders. The results on clinimetric properties of the Persian SAS are comparable with its original, English version. Persian version of the SAS can be used in "clinical" and "research" settings of patients with shoulder disorders.
NASA Astrophysics Data System (ADS)
Li, Le; Wang, Li-yong
2018-04-01
The application of accurate constitutive relationship in finite element simulation would significantly contribute to accurate simulation results, which plays a critical role in process design and optimization. In this investigation, the true stress-strain data of 3Cr20Ni10W2 heat-resisting alloy were obtained from a series of isothermal compression tests conducted in a wide temperature range of 1203-1403 K and strain rate range of 0.01-10 s-1 on a Gleeble 1500 testing machine. Then the constitutive relationship was modeled by an optimally constructed and well-trained back-propagation artificial neural network (BP-ANN). The evaluation of the BP-ANN model revealed that it has admirable performance in characterizing and predicting the flow behaviors of 3Cr20Ni10W2 heat-resisting alloy. Meanwhile, a comparison between improved Arrhenius-type constitutive equation and BP-ANN model shows that the latter has higher accuracy. Consequently, the developed BP-ANN model was used to predict abundant stress-strain data beyond the limited experimental conditions and construct the three-dimensional continuous response relationship for temperature, strain rate, strain, and stress. Finally, the three-dimensional continuous response relationship was applied to the numerical simulation of isothermal compression tests. The results show that such constitutive relationship can significantly promote the accuracy improvement of numerical simulation for hot forming processes.
Wright, Christian D.; Eddy, Sarah L.; Wenderoth, Mary Pat; Abshire, Elizabeth; Blankenbiller, Margaret; Brownell, Sara E.
2016-01-01
Recent reform efforts in undergraduate biology have recommended transforming course exams to test at more cognitively challenging levels, which may mean including more cognitively challenging and more constructed-response questions on assessments. However, changing the characteristics of exams could result in bias against historically underserved groups. In this study, we examined whether and to what extent the characteristics of instructor-generated tests impact the exam performance of male and female and middle/high- and low-socioeconomic status (SES) students enrolled in introductory biology courses. We collected exam scores for 4810 students from 87 unique exams taken across 3 yr of the introductory biology series at a large research university. We determined the median Bloom’s level and the percentage of constructed-response questions for each exam. Despite controlling for prior academic ability in our models, we found that males and middle/high-SES students were disproportionately favored as the Bloom’s level of exams increased. Additionally, middle/high-SES students were favored as the proportion of constructed-response questions on exams increased. Given that we controlled for prior academic ability, our findings do not likely reflect differences in academic ability level. We discuss possible explanations for our findings and how they might impact how we assess our students. PMID:27252299
Performance Characterization of LCLS-II Superconducting Radiofrequency Cryomodules
DOE Office of Scientific and Technical Information (OSTI.GOV)
Gregory, RuthAnn
This paper will describe the LCLS (Linac Coherent Light Source)-II, Fermilab’s role in the development of LCLS-II, and my contributions as a Lee Teng intern. LCLS-II is a second generation x-ray free electron laser being constructed at SLAC National Accelerator Laboratory. Fermilab is responsible for the design, construction, and testing of several 1.3 GHz cryomodules to be used in LCLS-II. These cryomodules are currently being tested at Fermilab. Some software was written to analyze the data from the cryomodule tests. This software assesses the performance of the cryomodules by looking at data on the cavity voltage, cavity gradient, dark current,more » and radiation.« less
ERIC Educational Resources Information Center
Toro, Maritsa
2011-01-01
The statistical assessment of dimensionality provides evidence of the underlying constructs measured by a survey or test instrument. This study focuses on educational measurement, specifically tests comprised of items described as multidimensional. That is, items that require examinee proficiency in multiple content areas and/or multiple cognitive…
Field Testing of Compartmentalization Methods for Multifamily Construction
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ueno, K.; Lstiburek, J. W.
2015-03-01
The 2012 International Energy Conservation Code (IECC) has an airtightness requirement of 3 air changes per hour at 50 Pascals test pressure (3 ACH50) for single-family and multifamily construction (in climate zones 3–8). The Leadership in Energy & Environmental Design certification program and ASHRAE Standard 189 have comparable compartmentalization requirements. ASHRAE Standard 62.2 will soon be responsible for all multifamily ventilation requirements (low rise and high rise); it has an exceptionally stringent compartmentalization requirement. These code and program requirements are driving the need for easier and more effective methods of compartmentalization in multifamily buildings.
The use of cognitive ability measures as explanatory variables in regression analysis.
Junker, Brian; Schofield, Lynne Steuerle; Taylor, Lowell J
2012-12-01
Cognitive ability measures are often taken as explanatory variables in regression analysis, e.g., as a factor affecting a market outcome such as an individual's wage, or a decision such as an individual's education acquisition. Cognitive ability is a latent construct; its true value is unobserved. Nonetheless, researchers often assume that a test score , constructed via standard psychometric practice from individuals' responses to test items, can be safely used in regression analysis. We examine problems that can arise, and suggest that an alternative approach, a "mixed effects structural equations" (MESE) model, may be more appropriate in many circumstances.
Evaluation of an Indoor Sonic Boom Subjective Test Facility at NASA Langley Research Center
NASA Technical Reports Server (NTRS)
Loubeau, Alexandra; Rathsam, Jonathan; Klos, Jacob
2011-01-01
A sonic boom simulator at NASA Langley Research Center has been constructed for research on human response to low-amplitude sonic booms heard indoors. Research in this facility will ultimately lead to development of a psychoacoustic model for single indoor booms. The first subjective test was designed to explore indoor human response to variations in sonic boom rise time and amplitude. Another goal was to identify loudness level variability across listener locations within the facility. Finally, the test also served to evaluate the facility as a laboratory research tool for studying indoor human response to sonic booms. Subjects listened to test sounds and were asked to rate their annoyance relative to a reference boom. Measurements of test signals were conducted for objective analysis and correlation with subjective responses. Results confirm the functionality of the facility and effectiveness of the test methods and indicate that loudness level does not fully describe indoor annoyance to the selected sonic boom signals.
Experimental investigation of a forced response condition in a multistage compressor
NASA Astrophysics Data System (ADS)
Murray, William Louis, III
The objective of this research is twofold. Firstly, the design, development, and construction of a test facility for a Honeywell APU-style centrifugal compressor was implemented, as well as the design and construction of an inlet flow experiment. Secondly, the aeromechanical response of an embedded stage in the Purdue 3-Stage axial research compressor was analyzed through a suite of different measurement techniques in the fulfillment of the end of the GUIde IV Consortium contract. The purpose of the first phase of Honeywell work was to comprehensively measure the flow field of an APU-style centrifugal compressor inlet through the use of Laser Doppler Velocimetry (LDV). A portion of a Honeywell supplied inlet was modified to provide optical access to the elbow, and a gas ejector system was designed and constructed to provide the same suction to the inlet that it would see during operation with the compressor. A performance and health monitoring electronics system was designed and purchased to support the testing of the Honeywell inlet ejector system and eventually it will be used for testing with a centrifugal compressor. Additionally, a secondary air and oil system has been designed and is currently being constructed in the test cell in preparation for the arrival of the Honeywell compressor this summer. An embedded rotor stage in the Purdue 3-stage compressor, with a Campbell diagram crossing of the 1T vibratory mode was analyzed with a suite of measurement systems. In addition to steady state compressor performance measurements, other types of measurements were used to characterize the aerodynamic forcing function for this forced response condition including: NSMS, high-frequency pressure transducers mounted in the casing and in a downstream stator, and cross-film thermal anemometry. Rotor geometry was measured by Aerodyne using an in-situ laser scanning technique. Vibrometry testing was performed at WPAFB to characterize safe operating speeds for stator vibrations. Several unsteady data processing techniques were developed to analyze the fast-response pressure and hot film data. Since it was unsafe to operate the compressor at R2 resonance, slow sweeps through the resonance were utilized, thus complicating the data processing strategy. After significant analysis, there is evidence of the R2 vibration in the fast-response pressure measurements using frequency and time-based analysis methods. Although not used in final data acquisition, the 3D hotwire calibration facility and data processing techniques have been improved. The overall purpose of the work is to create a detailed dataset centered on the forced response of R2 at the 1T Campbell diagram crossing to help further the development and validation of predictive aeromechanic simulations of axial compressors.
Aircraft propeller induced structure-borne noise
NASA Technical Reports Server (NTRS)
Unruh, James F.
1989-01-01
A laboratory-based test apparatus employing components typical of aircraft construction was developed that would allow the study of structure-borne noise transmission due to propeller induced wake/vortex excitation of in-wake structural appendages. The test apparatus was employed to evaluate several aircraft installation effects (power plant placement, engine/nacelle mass loading, and wing/fuselage attachment methods) and several structural response modifications for structure-borne noise control (the use of wing blocking mass/fuel, wing damping treaments, and tuned mechanical dampers). Most important was the development of in-flight structure-borne noise transmission detection techniques using a combination of ground-based frequency response function testing and in-flight structural response measurement. Propeller wake/vortex excitation simulation techniques for improved ground-based testing were also developed to support the in-flight structure-borne noise transmission detection development.
Singh, Amika S; Chinapaw, Mai J M; Uijtdewilligen, Léonie; Vik, Froydis N; van Lippevelde, Wendy; Fernández-Alvira, Juan M; Stomfai, Sarolta; Manios, Yannis; van der Sluijs, Maria; Terwee, Caroline; Brug, Johannes
2012-08-13
Insight in parental energy balance-related behaviours, their determinants and parenting practices are important to inform childhood obesity prevention. Therefore, reliable and valid tools to measure these variables in large-scale population research are needed. The objective of the current study was to examine the test-retest reliability and construct validity of the parent questionnaire used in the ENERGY-project, assessing parental energy balance-related behaviours, their determinants, and parenting practices among parents of 10-12 year old children. We collected data among parents (n = 316 in the test-retest reliability study; n = 109 in the construct validity study) of 10-12 year-old children in six European countries, i.e. Belgium, Greece, Hungary, the Netherlands, Norway, and Spain. Test-retest reliability was assessed using the intra-class correlation coefficient (ICC) and percentage agreement comparing scores from two measurements, administered one week apart. To assess construct validity, the agreement between questionnaire responses and a subsequent interview was assessed using ICC and percentage agreement.All but one item showed good to excellent test-retest reliability as indicated by ICCs > .60 or percentage agreement ≥ 75%. Construct validity appeared to be good to excellent for 92 out of 121 items, as indicated by ICCs > .60 or percentage agreement ≥ 75%. From the other 29 items, construct validity was moderate for 24 and poor for 5 items. The reliability and construct validity of the items of the ENERGY-parent questionnaire on multiple energy balance-related behaviours, their potential determinants, and parenting practices appears to be good. Based on the results of the validity study, we strongly recommend adapting parts of the ENERGY-parent questionnaire if used in future research.
Moen, Vegard Pihl; Drageset, Jorunn; Eide, Geir Egil; Klokkerud, Mari; Gjesdal, Sturla
2017-02-01
The World Health Organization Disability Assessment Schedule (WHODAS) 2.0 is a generic instrument to assess disability covering six domains. The purpose of this study was to investigate the potential of the instrument for monitoring disability in specialized somatic rehabilitation by testing reliability, construct validity and responsiveness of WHODAS 2.0, Norwegian version, among patients with various health conditions. For taxonomy, terminology and definitions, the Consensus-based Standards for the Selection of Health Measurement Instruments were followed. Reproducibility was investigated by the intra-class correlation coefficient (ICC) in a randomly selected sample. Internal consistency was assessed by Cronbach's alpha. Construct validity was evaluated by correlations between WHODAS 2.0 and the Medical Outcomes Study 36-item Short Form, and fit of the hypothesized structure using confirmatory factor analysis (CFA). Responsiveness was evaluated in another randomly selected sample by testing a priori formulated hypotheses. Nine hundred seventy patients were included in the study. Reproducibility and responsiveness were evaluated in 53 and 104 patients, respectively. The ICC for the WHODAS 2.0 domains ranged from 0.63 to 0.84 and was 0.87 for total score. Cronbach's alpha for domains ranged from 0.75 to 0.94 and was 0.93 for total score. For construct validity, 6 of 12 expected correlations were confirmed and CFA did not achieve satisfactory fit indices. For responsiveness, 3 of 8 hypotheses were confirmed. The Norwegian version of WHODAS 2.0 showed moderate to satisfactory reliability and moderate validity in rehabilitation patients. However, the present study indicated possible limitations in terms of responsiveness.
Developing techniques for cause-responsibility analysis of occupational accidents.
Jabbari, Mousa; Ghorbani, Roghayeh
2016-11-01
The aim of this study was to specify the causes of occupational accidents, determine social responsibility and the role of groups involved in work-related accidents. This study develops occupational accidents causes tree, occupational accidents responsibility tree, and occupational accidents component-responsibility analysis worksheet; based on these methods, it develops cause-responsibility analysis (CRA) techniques, and for testing them, analyzes 100 fatal/disabling occupational accidents in the construction setting that were randomly selected from all the work-related accidents in Tehran, Iran, over a 5-year period (2010-2014). The main result of this study involves two techniques for CRA: occupational accidents tree analysis (OATA) and occupational accidents components analysis (OACA), used in parallel for determination of responsible groups and responsibilities rate. From the results, we find that the management group of construction projects has 74.65% responsibility of work-related accidents. The developed techniques are purposeful for occupational accidents investigation/analysis, especially for the determination of detailed list of tasks, responsibilities, and their rates. Therefore, it is useful for preventing work-related accidents by focusing on the responsible group's duties. Copyright © 2016 Elsevier Ltd. All rights reserved.
NASA Astrophysics Data System (ADS)
Serrano, S.; de Gracia, A.; Pérez, G.; Cabeza, L. F.
2017-10-01
The building envelope has high potential to reduce the energy consumption of buildings according to the International Energy Agency (IEA) because it is involved along all the building process: design, construction, use, and end-of-life. The present study compares the thermal behavior of seven different building prototypes tested under Mediterranean climate: two of them were built with sustainable earth-based construction systems and the other five, with conventional brick construction systems. The tested earth-based construction systems consist of rammed earth walls and wooden green roofs, which have been adapted to contemporary requirements by reducing their thickness. In order to balance the thermal response, wooden insulation panels were placed in one of the earth prototypes. All building prototypes have the same inner dimensions and orientation, and they are fully monitored to register inner temperature and humidity, surface walls temperatures and temperatures inside walls. Furthermore, all building prototypes are equipped with a heat pump and an electricity meter to measure the electrical energy consumed to maintain a certain level of comfort. The experimentation was performed along a whole year by carrying out several experiments in free floating and controlled temperature conditions. This study aims at demonstrating that sustainable construction systems can behave similarly or even better than conventional ones under summer and winter conditions. Results show that thermal behavior is strongly penalized when rammed earth wall thickness is reduced. However, the addition of 6 cm of wooden insulation panels in the outer surface of the building prototype successfully improves the thermal response.
Zakhem, Elie; Raghavan, Shreya; Gilmont, Robert R; Bitar, Khalil N
2012-01-01
Intestinal tissue engineering is an emerging field due to a growing demand for intestinal lengthening and replacement procedures secondary to massive resections of the bowel. Here, we demonstrate the potential use of a chitosan/collagen scaffold as a 3D matrix to support the bioengineered circular muscle constructs maintain their physiological functionality. We investigated the biocompatibility of chitosan by growing rabbit colonic circular smooth muscle cells (RCSMCs) on chitosan-coated plates. The cells maintained their spindle-like morphology and preserved their smooth muscle phenotypic markers. We manufactured tubular scaffolds with central openings composed of chitosan and collagen in a 1:1 ratio. Concentrically-aligned 3D circular muscle constructs were bioengineered using fibrin-based hydrogel seeded with RCSMCs. The constructs were placed around the scaffold for 2 weeks, after which they were taken off and tested for their physiological functionality. The muscle constructs contracted in response to Acetylcholine (Ach) and potassium chloride (KCl) and they relaxed in response to vasoactive intestinal peptide (VIP). These results demonstrate that chitosan is a biomaterial possibly suitable for intestinal tissue engineering applications. PMID:22483012
Load response instrumentation of SHRP pavement : research implementation plan.
DOT National Transportation Integrated Search
2006-12-07
As part of its support for the Strategic Highway Research Program (SHRP), the Ohio Department of Transportation, : in conjunction with the Federal Highway Administration constructed a comprehensive test road encompassing four : of nine experiments in...
Test-retest reliability of the underlying latent factor structure of alcohol subjective response.
Lutz, Joseph A; Childs, Emma
2017-04-01
Alcohol subjective experiences are multi-dimensional and demonstrate wide inter-individual variability. Recent efforts have sought to establish a clearer understanding of subjective alcohol responses by identifying core constructs derived from multiple measurement instruments. The aim of this study was to evaluate the temporal stability of this approach to conceptualizing alcohol subjective experiences across successive alcohol administrations in the same individuals. Healthy moderate alcohol drinkers (n = 104) completed six experimental sessions each, three with alcohol (0.8 g/kg), and three with a non-alcoholic control beverage. Participants reported subjective mood and drug effects using standardized questionnaires before and at repeated times after beverage consumption. We explored the underlying latent structure of subjective responses for all alcohol administrations using exploratory factor analysis and then tested measurement invariance over the three successive administrations using multi-group confirmatory factor analyses. Exploratory factor analyses on responses to alcohol across all administrations yielded four factors representing "Positive mood," "Sedation," "Stimulation/Euphoria," and "Drug effects and Urges." A confirmatory factor analysis on the separate administrations indicated acceptable configural and metric invariance and moderate scalar invariance. In this study, we demonstrate temporal stability of the underlying constructs of subjective alcohol responses derived from factor analysis. These findings strengthen the utility of this approach to conceptualizing subjective alcohol responses especially for use in prospective and longitudinal alcohol challenge studies relating subjective response to alcohol use disorder risk.
ERIC Educational Resources Information Center
Wang, Shudong; Wang, Ning; Hoadley, David
This study examined the comparability of scores on the National Nurses Aides Assessment Program (NNAAP) test across language and administration condition groups for calibration and validation samples that were randomly drawn from the same population. A sample of 20,568 candidate responses to 1 test form was used. This examination is given in…
ERIC Educational Resources Information Center
Nichols, Sharon L.; Glass, Gene V.; Berliner, David C.
2005-01-01
Under the federal No Child Left Behind Act of 2001 (NCLB), standardized test scores are the indicator used to hold schools and school districts accountable for student achievement. Each state is responsible for constructing an accountability system, attaching consequences--or stakes--for student performance. The theory of action implied by this…
High-Stakes Testing and Student Achievement: Problems for the No Child Left Behind Act
ERIC Educational Resources Information Center
Nichols, Sharon L.; Glass, Gene V.; Berliner, David C.
2005-01-01
Under the federal No Child Left Behind Act of 2001 (NCLB), standardized test scores are the indicator used to hold schools and school districts accountable for student achievement. Each state is responsible for constructing an accountability system, attaching consequences--or stakes--for student performance. The theory of action implied by this…
Asymptotic Standard Errors of Observed-Score Equating with Polytomous IRT Models
ERIC Educational Resources Information Center
Andersson, Björn
2016-01-01
In observed-score equipercentile equating, the goal is to make scores on two scales or tests measuring the same construct comparable by matching the percentiles of the respective score distributions. If the tests consist of different items with multiple categories for each item, a suitable model for the responses is a polytomous item response…
Chen, R; Hahn, C E W; Farmery, A D
2012-08-15
The development of a methodology for testing the time response, linearity and performance characteristics of ultra fast fibre optic oxygen sensors in the liquid phase is presented. Two standard medical paediatric oxygenators are arranged to provide two independent extracorporeal circuits. Flow from either circuit can be diverted over the sensor under test by means of a system of rapid cross-over solenoid valves exposing the sensor to an abrupt change in oxygen partial pressure, P O2. The system is also capable of testing the oxygen sensor responses to changes in temperature, carbon dioxide partial pressure P CO2 and pH in situ. Results are presented for a miniature fibre optic oxygen sensor constructed in-house with a response time ≈ 50 ms and a commercial fibre optic sensor (Ocean Optics Foxy), when tested in flowing saline and stored blood. Copyright © 2012 Elsevier B.V. All rights reserved.
Measuring Constructs in Family Science: How Can Item Response Theory Improve Precision and Validity?
Gordon, Rachel A.
2014-01-01
This article provides family scientists with an understanding of contemporary measurement perspectives and the ways in which item response theory (IRT) can be used to develop measures with desired evidence of precision and validity for research uses. The article offers a nontechnical introduction to some key features of IRT, including its orientation toward locating items along an underlying dimension and toward estimating precision of measurement for persons with different levels of that same construct. It also offers a didactic example of how the approach can be used to refine conceptualization and operationalization of constructs in the family sciences, using data from the National Longitudinal Survey of Youth 1979 (n = 2,732). Three basic models are considered: (a) the Rasch and (b) two-parameter logistic models for dichotomous items and (c) the Rating Scale Model for multicategory items. Throughout, the author highlights the potential for researchers to elevate measurement to a level on par with theorizing and testing about relationships among constructs. PMID:25663714
ERIC Educational Resources Information Center
Puhan, Gautam
2013-01-01
When a constructed-response test form is reused, raw scores from the two administrations of the form may not be comparable. The solution to this problem requires a rescoring, at the current administration, of examinee responses from the previous administration. The scores from this "rescoring" can be used as an anchor for equating. In…
Design of a hydraulic analog of the circulatory system for evaluating artificial hearts.
Donovan, F M
1975-01-01
A major problem in improving artificial heart designs is the absence of methods for accurate in vitro testing of artificial heart systems. A mock circulatory system has been constructed which hydraulically simulates the systemic and pulmonary circulations of the normal human. The device is constructed of 1/2 in. acrylic sheet and has overall dimensions of 24 in. wide, 16 in. tall, and 8 in. deep. The artificial heart to be tested is attached to the front of the device, and pumps fluid from the systemic venous chamber into the pulmonary arterial chamber and from the pulmonary venous chamber into the systemic arterial chamber. Each of the four chambers is hermetically sealed. The compliance of each chamber is determined by the volume of air trapped above the fluid in that chamber. The pulmonary and systemic resistances are set automatically by bellows-operated valves to simulate the barroreceptor response in the systemic arteries and the passive pulmonary resistance response in the pulmonary arteries. Cardiac output is measured by a turbine flowmeter in the systemic circulation. Results using the Kwan-Gett artificial heart show a good comparison between the mock circulatory system response and the calf response.
A step-up test procedure to find the minimum effective dose.
Wang, Weizhen; Peng, Jianan
2015-01-01
It is of great interest to find the minimum effective dose (MED) in dose-response studies. A sequence of decreasing null hypotheses to find the MED is formulated under the assumption of nondecreasing dose response means. A step-up multiple test procedure that controls the familywise error rate (FWER) is constructed based on the maximum likelihood estimators for the monotone normal means. When the MED is equal to one, the proposed test is uniformly more powerful than Hsu and Berger's test (1999). Also, a simulation study shows a substantial power improvement for the proposed test over four competitors. Three R-codes are provided in Supplemental Materials for this article. Go to the publishers online edition of Journal of Biopharmaceutical Statistics to view the files.
Dowel bar retrofit performance in Wisconsin.
DOT National Transportation Integrated Search
2010-05-01
In 1999, WisDOT constructed test sections on I-39 to evaluate the dowel bar retrofit (DBR) rehabilitation technique for faulted concrete pavement slabs. Two years later, mortar deterioration and debonding were noted in the dowel slots. In response to...
Evaluation of the effectiveness of centerline rumble stripes on rural roads.
DOT National Transportation Integrated Search
2015-03-01
This report documents the site characteristics, constructability, summary of audibility testing, and maintenance response of centerline rumble : stripes at two locations: US Route 4 in Mendon-Killington and VT Route 105 in Sheldon. : The primary obje...
The use of cognitive ability measures as explanatory variables in regression analysis
Junker, Brian; Schofield, Lynne Steuerle; Taylor, Lowell J
2015-01-01
Cognitive ability measures are often taken as explanatory variables in regression analysis, e.g., as a factor affecting a market outcome such as an individual’s wage, or a decision such as an individual’s education acquisition. Cognitive ability is a latent construct; its true value is unobserved. Nonetheless, researchers often assume that a test score, constructed via standard psychometric practice from individuals’ responses to test items, can be safely used in regression analysis. We examine problems that can arise, and suggest that an alternative approach, a “mixed effects structural equations” (MESE) model, may be more appropriate in many circumstances. PMID:26998417
Assessment of burning characteristics of aircraft interior materials
NASA Technical Reports Server (NTRS)
Grand, A. F.; Valys, A. J.
1981-01-01
The performance of a series of seat cushion design constructions was compared based on their heat and smoke release characteristics. Tests were conducted in a room size calorimeter instrumented for measuring weight loss, rate of heat release, smoke and volatile decomposition products and the cumulative energy release. Baseline data were obtained from burn tests conducted on commercial airline salvage sets as a comparison with more advanced seat designs. A toxicological assessment of smoke and fire gases involved the exposure of test animals and their biological responses ascertained. Relative toxicological hazards of the combustion gases are discussed based on the animal response studies and the analysis of the combustion gases.
Singh, Varun Pratap; Singh, Rajkumar
2014-03-01
The aim of this study was to develop a reliable and valid Nepali version of the Psychosocial Impact of Dental Aesthetic Questionnaire (PIDAQ). Cross-sectional descriptive validation study. B.P. Koirala Institute of Health Sciences, Dharan, Nepal. A rigorous translation process including conceptual and semantic evaluation, translation, back translation and pre-testing was carried out. Two hundred and fifty-two undergraduates, including equal numbers of males and females with an age ranging from 18 to 29 years (mean age: 22·33±2·114 years), participated in this study. Reliability was assessed by Cronbach's alpha coefficient and the coefficient of correlation was used to assess correlation between items and test-retest reliability. The construct validity was tested by factorial analysis. Convergent construct validity was tested by comparison of PIDAQ scores with the aesthetic component of the index of orthodontic treatment needs (IOTN-AC) and perception of occlusion scale (POS), respectively. Discriminant construct validity was assessed by differences in score for those who demand treatment and those who did not. The response rate was 100%. One hundred and twenty-three individuals had a demand for orthodontic treatment. The Nepali PIDAQ had excellent reliability with Cronbach's alpha of 0·945, corrected item correlation between 0·525 and 0·790 and overall test-retest reliability of 0·978. The construct validity was good with formation of a new sub-domain 'Dental self-consciousness'. The scale had good correlation with IOTN-AC and POS fulfilling convergent construct validity. The discriminant construct validity was proved by significant differences in scores for subjects with demand and without demand for treatment. To conclude, Nepali version of PIDAQ has good psychometric properties and can be used effectively in this population group for further research.
How to construct and implement script concordance tests: insights from a systematic review.
Dory, Valérie; Gagnon, Robert; Vanpee, Dominique; Charlin, Bernard
2012-06-01
Programmes of assessment should measure the various components of clinical competence. Clinical reasoning has been traditionally assessed using written tests and performance-based tests. The script concordance test (SCT) was developed to assess clinical data interpretation skills. A recent review of the literature examined the validity argument concerning the SCT. Our aim was to provide potential users with evidence-based recommendations on how to construct and implement an SCT. A systematic review of relevant databases (MEDLINE, ERIC [Education Resources Information Centre], PsycINFO, the Research and Development Resource Base [RDRB, University of Toronto]) and Google Scholar, medical education journals and conference proceedings was conducted for references in English or French. It was supplemented by ancestry searching and by additional references provided by experts. The search yielded 848 references, of which 80 were analysed. Studies suggest that tests with around 100 items (25-30 cases), of which 25% are discarded after item analysis, should provide reliable scores. Panels with 10-20 members are needed to reach adequate precision in terms of estimated reliability. Panellists' responses can be analysed by checking for moderate variability among responses. Studies of alternative scoring methods are inconclusive, but the traditional scoring method is satisfactory. There is little evidence on how best to determine a pass/fail threshold for high-stakes examinations. Our literature search was broad and included references from medical education journals not indexed in the usual databases, conference abstracts and dissertations. There is good evidence on how to construct and implement an SCT for formative purposes or medium-stakes course evaluations. Further avenues for research include examining the impact of various aspects of SCT construction and implementation on issues such as educational impact, correlations with other assessments, and validity of pass/fail decisions, particularly for high-stakes examinations. © Blackwell Publishing Ltd 2012.
ERIC Educational Resources Information Center
Evanini, Keelan; Heilman, Michael; Wang, Xinhao; Blanchard, Daniel
2015-01-01
This report describes the initial automated scoring results that were obtained using the constructed responses from the Writing and Speaking sections of the pilot forms of the "TOEFL Junior"® Comprehensive test administered in late 2011. For all of the items except one (the edit item in the Writing section), existing automated scoring…
Koller, Ingrid; Levenson, Michael R.; Glück, Judith
2017-01-01
The valid measurement of latent constructs is crucial for psychological research. Here, we present a mixed-methods procedure for improving the precision of construct definitions, determining the content validity of items, evaluating the representativeness of items for the target construct, generating test items, and analyzing items on a theoretical basis. To illustrate the mixed-methods content-scaling-structure (CSS) procedure, we analyze the Adult Self-Transcendence Inventory, a self-report measure of wisdom (ASTI, Levenson et al., 2005). A content-validity analysis of the ASTI items was used as the basis of psychometric analyses using multidimensional item response models (N = 1215). We found that the new procedure produced important suggestions concerning five subdimensions of the ASTI that were not identifiable using exploratory methods. The study shows that the application of the suggested procedure leads to a deeper understanding of latent constructs. It also demonstrates the advantages of theory-based item analysis. PMID:28270777
An empirical look at the Defense Mechanism Test (DMT): reliability and construct validity.
Ekehammar, Bo; Zuber, Irena; Konstenius, Marja-Liisa
2005-07-01
Although the Defense Mechanism Test (DMT) has been in use for almost half a century, there are still quite contradictory views about whether it is a reliable instrument, and if so, what it really measures. Thus, based on data from 39 female students, we first examined DMT inter-coder reliability by analyzing the agreement among trained judges in their coding of the same DMT protocols. Second, we constructed a "parallel" photographic picture that retained all structural characteristic of the original and analyzed DMT parallel-test reliability. Third, we examined the construct validity of the DMT by (a) employing three self-report defense-mechanism inventories and analyzing the intercorrelations between DMT defense scores and corresponding defenses in these instruments, (b) studying the relationships between DMT responses and scores on trait and state anxiety, and (c) relating DMT-defense scores to measures of self-esteem. The main results showed that the DMT can be coded with high reliability by trained coders, that the parallel-test reliability is unsatisfactory compared to traditional psychometric standards, that there is a certain generalizability in the number of perceptual distortions that people display from one picture to another, and that the construct validation provided meager empirical evidence for the conclusion that the DMT measures what it purports to measure, that is, psychological defense mechanisms.
Everson, Naleya; Levett-Jones, Tracy; Pitt, Victoria; Lapkin, Samuel; Van Der Riet, Pamela; Rossiter, Rachel; Jones, Donovan; Gilligan, Conor; Courtney Pratt, Helen
2018-04-25
Abstract Background Empathic concern has been found to decline in health professional students. Few effective educational programs and a lack of validated scales are reported. Previous analysis of the Empathic Concern scale of the Emotional Response Questionnaire has reported both one and two latent constructs. Aim To evaluate the impact of simulation on nursing students' empathic concern and test the psychometric properties of the Empathic Concern scale. Methods The study used a one group pre-test post-test design with a convenience sample of 460 nursing students. Empathic concern was measured pre-post simulation with the Empathic Concern scale. Factor Analysis was undertaken to investigate the structure of the scale. Results There was a statistically significant increase in Empathic Concern scores between pre-simulation 5.57 (SD = 1.04) and post-simulation 6.10 (SD = 0.95). Factor analysis of the Empathic Concern scale identified one latent dimension. Conclusion Immersive simulation may promote empathic concern. The Empathic Concern scale measured a single latent construct in this cohort.
NASA Astrophysics Data System (ADS)
Tangeman, Andrew Gerrit
Since its inception, the No Child Left Behind Act of 2001 (NCLB) and recent additions to the U.S. Elementary and Secondary Education Act (ESEA) have elicited a broad swath of responses from the educational community. These responses include critical discussions of how standardized testing requirements proliferate a "teach for the test" mentality that transforms how reading, writing, and mathematics are taught in public schools. This thesis focused specifically on "literacy" in relation to the policies that challenge its status as a subjective form of communication, knowledge sharing, and story-telling. Embedded within the term "literacy" are sets of socially-constructed dualisms such as "good school" vs. "bad school," "literate" vs. "illiterate," and "reader" vs. "test-taker" that are propagated under education reform. Investigating these dualisms involved a mixed methods approach, which included the use of critical theory, geovisualization, and geographic analysis. The resulting data allows for a comprehensive look into the economic, political, social, and cultural forces involved in the production of literate space(s) in San Diego, California.
ERIC Educational Resources Information Center
Kim, Sooyeon; Walker, Michael E.
2011-01-01
This study examines the use of subpopulation invariance indices to evaluate the appropriateness of using a multiple-choice (MC) item anchor in mixed-format tests, which include both MC and constructed-response (CR) items. Linking functions were derived in the nonequivalent groups with anchor test (NEAT) design using an MC-only anchor set for 4…
Beckley, Firle; Best, Wendy; Johnson, Fiona; Edwards, Susan; Maxim, Jane
2013-01-01
The application of Conversation Analysis (CA) to the investigation of agrammatic aphasia reveals that utterances produced by speakers with agrammatism engaged in everyday conversation differ significantly from utterances produced in response to decontextualised assessment and therapy tasks. Early studies have demonstrated that speakers with agrammatism construct turns from sequences of nouns, adjectives, discourse markers and conjunctions, packaged by a distinct pattern of prosody. This article presents examples of turn construction methods deployed by three people with agrammatism as they take an extended turn, in order to recount a past event, initiate a discussion or have a disagreement. This is followed by examples of sequences occurring in the talk of two of these speakers that result in different, and more limited, turn construction opportunities, namely “test” questions asked in order to initiate a new topic of talk, despite the conversation partner knowing the answer. The contrast between extended turns and test question sequences illustrates the effect of interactional context on aphasic turn construction practices, and the potential of less than optimal sequences to mask turn construction skills. It is suggested that the interactional motivation for test question sequences in these data are to invite people with aphasia to contribute to conversation, rather than to practise saying words in an attempt to improve language skills. The idea that test question sequences may have their origins in early attempts to deal with acute aphasia, and the potential for conversation partnerships to become “stuck” in such interactional patterns after they may have outlived their usefulness, are discussed with a view to clinical implications. PMID:23848370
Is academic buoyancy anything more than adaptive coping?
Putwain, David W; Connors, Liz; Symes, Wendy; Douglas-Osborn, Erica
2012-05-01
Academic buoyancy refers to a positive, constructive, and adaptive response to the types of challenges and setbacks experienced in a typical and everyday academic setting. In this project we examined whether academic buoyancy explained any additional variance in test anxiety over and above that explained by coping. Two hundred and ninety-eight students in their final two years of compulsory schooling completed self-report measures of academic buoyancy, coping, and test anxiety. Results suggested that buoyancy was inversely related to test anxiety and unrelated to coping. With the exception of test-irrelevant thoughts, test anxiety was positively related to avoidance coping and social support. Test-irrelevant thoughts were inversely related to task focus, unrelated to social support, and positively related to avoidance. A hierarchical regression analysis showed that academic buoyancy explained a significant additional proportion of variance in test anxiety when the variance for coping had already been accounted for. These findings suggest that academic buoyancy can be considered as a distinct construct from that of adaptive coping.
ERIC Educational Resources Information Center
Greenwald, Anthony G.; Rudman, Laurie A.; Nosek, Brian A.; Zayas, Vivian
2006-01-01
Blanton and Jaccard drafted a Postscript in response to our Reply. Their Postscript has two types of arguments: (a) repetitions of statements made previously in their article and already addressed in our Reply (thus needing no further comment here) and (b) regrettably, responses to arguments that they themselves constructed and attributed to us.…
ERIC Educational Resources Information Center
Olson, Lynn
2005-01-01
Twenty-three states are expanding their testing programs to additional grades this school year to comply with the federal No Child Left Behind Act. In devising the new tests, most states have defied predictions and chosen to go beyond multiple-choice items, by including questions that ask students to construct their own responses. But many state…
Kanofsky, Konstantin; Lehmeyer, Mona; Schulze, Jutta; Hehl, Reinhard
2016-01-01
Plants recognize pathogens by microbe-associated molecular patterns (MAMPs) and subsequently induce an immune response. The regulation of gene expression during the immune response depends largely on cis-sequences conserved in promoters of MAMP-responsive genes. These cis-sequences can be analyzed by constructing synthetic promoters linked to a reporter gene and by testing these constructs in transient expression systems. Here, the use of the parsley (Petroselinum crispum) protoplast system for analyzing MAMP-responsive synthetic promoters is described. The synthetic promoter consists of four copies of a potential MAMP-responsive cis-sequence cloned upstream of a minimal promoter and the uidA reporter gene. The reporter plasmid contains a second reporter gene, which is constitutively expressed and hence eliminates the requirement of a second plasmid used as a transformation control. The reporter plasmid is transformed into parsley protoplasts that are elicited by the MAMP Pep25. The MAMP responsiveness is validated by comparing the reporter gene activity from MAMP-treated and untreated cells and by normalizing reporter gene activity using the constitutively expressed reporter gene.
Heald, S L; Riddle, D L; Lamb, R L
1997-10-01
The purposes of this study were (1) to assess the construct validity of the Shoulder Pain and Disability Index (SPADI) and (2) to determine whether the SPADI is more responsive than the Sickness Impact Profile (SIP), a generic health status measure. The sample consisted of 94 patients who were diagnosed with a shoulder problem and referred to six outpatient physical therapy clinics. Clinically meaningful change was determined by use of an ordinal rating scale designed to determine whether the patient's shoulder function was improved, the same, or worse following treatment. Spearman rho correlations were calculated for the initial visit SPADI and SIP scores. The standardized response mean (SRM) was used to measure responsiveness for the patients who were judged to be improved. One-tailed paired t tests (alpha = .01) were used to determine whether differences existed among SRM values. Correlations between the SPADI and SIP scores ranged from r = .01 to r = .57. The SRM value was higher for the SPADI total score (SRM = 1.38) than for the SIP total score (SRM = 0.79). Most correlations between SPADI and SIP scores provided support for the construct validity of the SPADI. The SPADI does not appear to strongly reflect occupational and recreational disability and is more responsive than the SIP.
A note on sample size calculation for mean comparisons based on noncentral t-statistics.
Chow, Shein-Chung; Shao, Jun; Wang, Hansheng
2002-11-01
One-sample and two-sample t-tests are commonly used in analyzing data from clinical trials in comparing mean responses from two drug products. During the planning stage of a clinical study, a crucial step is the sample size calculation, i.e., the determination of the number of subjects (patients) needed to achieve a desired power (e.g., 80%) for detecting a clinically meaningful difference in the mean drug responses. Based on noncentral t-distributions, we derive some sample size calculation formulas for testing equality, testing therapeutic noninferiority/superiority, and testing therapeutic equivalence, under the popular one-sample design, two-sample parallel design, and two-sample crossover design. Useful tables are constructed and some examples are given for illustration.
Nicholas, Benjamin L; Brennan, F R; Martinez-Torrecuadrada, J L; Casal, J I; Hamilton, W D; Wakelin, D
2002-06-21
NIH mice were vaccinated subcutaneously or intranasally with chimaeric cow pea mosaic virus (CPMV) constructs expressing a 17-mer peptide sequence from canine parvovirus (CPV) as monomers or dimers on the small or large protein surface subunits. Responses to the chimaeric virus particles (CVPs) were compared with those of mice immunized with the native virus or with parvovirus peptide conjugated to keyhole limpet haemocyanin (KLH). The characteristics of the immune response to vaccination were examined by measuring serum and mucosal antibody responses in ELISA, in vitro antigen-induced spleen cell proliferation and cytokine responses. Mice made strong antibody responses to the native plant virus and peptide-specific responses to two of the four CVP constructs tested which were approximately 10-fold lower than responses to native plant virus. The immune response generated by the CVP constructs showed a marked TH1 bias, as determined by a predominantly IgG(2a) isotype peptide-specific antibody response and the release of IFN-gamma but not IL-4 or IL-5 from lymphocytes exposed to antigen in vitro. In comparison, parvovirus peptide conjugated to KLH generated an IgG(1)-biased (TH2) response. These data indicate that the presentation of peptides on viral particles could be used to bias the immune response in favor of a TH1 response.Anti-viral and anti-peptide IgA were detected in intestinal and bronchial lavage fluid of immunized mice, demonstrating that a mucosal immune response to CPV can be generated by systemic and mucosal immunization with CVP vaccines. Serum antibody from both subcutaneously-vaccinated and intranasally-vaccinated mice showed neutralizing activity against CPV in vitro.
O'Sullivan, Elizabeth J; Rasmussen, Kathleen M
2017-12-01
The breastfeeding surveillance tool in the United States, the National Immunization Survey, considers the maternal-infant dyad to be breastfeeding for as long as the infant consumes human milk (HM). However, many infants consume at least some HM from a bottle, which can lead to health outcomes different from those for at-the-breast feeding. Our aim was to develop a construct-valid questionnaire that categorizes infants by nutrition source, that is, own mother's HM, another mother's HM, infant formula, or other and feeding mode, that is, at the breast or from a bottle, and test the reliability of this questionnaire. The Questionnaire on Infant Feeding was developed through a literature review and modified based on qualitative research. Construct validity was assessed through cognitive interviews and a test-retest reliability study was conducted among mothers who completed the questionnaire twice, 1 month apart. Cognitive interviews were conducted with ten mothers from upstate New York between September and December 2014. A test-retest reliability study was conducted among 44 mothers from across the United States between March and May 2015. Equivalence of questions with continuous responses about the timing of starting and stopping various behaviors and the agreement between responses to questions with categorical responses on the two questionnaires completed 1 month apart. Reliability was assessed using paired-equivalence tests for questions about the timing of starting and stopping behaviors and weighted Cohen's κ for questions about the frequency and intensity of behaviors. Reliability of the Questionnaire on Infant Feeding was moderately high among mothers of infants aged 19 to 35 months, with most questions about the timing of starting and stopping behaviors equivalent to within 1 month. Weighted Cohen's κ for categorical questions indicated substantial agreement. The Questionnaire on Infant Feeding is a construct-valid tool to measure duration, intensity, and mode of infant HM consumption and duration of maternal HM production that is reliable within 19 to 35 months postpartum. Criterion-validity testing of these questions will improve the utility of the Questionnaire on Infant Feeding as a surveillance tool. Copyright © 2017 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.
Human fibroblast-derived extracellular matrix constructs for bone tissue engineering applications.
Tour, Gregory; Wendel, Mikael; Tcacencu, Ion
2013-10-01
We exploited the biomimetic approach to generate constructs composed of synthetic biphasic calcium phosphate ceramic and extracellular matrix (SBC-ECM) derived from adult human dermal fibroblasts in complete xeno-free culture conditions. The construct morphology and composition were assessed by scanning electron microscopy, histology, immunohistochemistry, Western blot, glycosaminoglycan, and hydroxyproline assays. Residual DNA quantification, endotoxin testing, and local inflammatory response after implantation in a rat critical-sized calvarial defect were used to access the construct biocompatibility. Moreover, in vitro interaction of human mesenchymal stem cells (hMSCs) with the constructs was studied. The bone marrow- and adipose tissue-derived mesenchymal stem cells were characterized by flow cytometry and tested for osteogenic differentiation capacity prior seeding onto SBC-ECM, followed by alkaline phosphatase, 3-(4,5-dimethythiazol-2-yl)-2,5-diphenyl tetrazolium bromide assay, and real-time quantitative polymerase chain reaction to assess the osteogenic differentiation of hMSCs after seeding onto the constructs at different time intervals. The SBC-ECM constructs enhanced osteogenic differentiation of hMSCs in vitro and exhibited excellent handling properties and high biocompatibility in vivo. Our results highlight the ability to generate in vitro fibroblast-derived ECM constructs in complete xeno-free conditions as a step toward clinical translation, and the potential use of SBC-ECM in craniofacial bone tissue engineering applications. Copyright © 2013 Wiley Periodicals, Inc., a Wiley Company.
1993-09-01
DOCUMENTATION PAGE M N Public mpsMIs b~ b•r tOr coleton of ia nlormmn ias edsimad to aevue 1 hour pw response , indudng the Snm ta raing e. taeu"tig aining...Asbestos Emergency Response Act of 1986 (AHERA), which mandates inspection in school grades Kindergarten through 12. Congress is currently...CRC), Georgia Institute of Technology, Atlanta, GA. The CRC was responsible for the technical portion of the research program; i.e., developing the test
McDonald, J T; West, W G; Kearfott, K J
2004-11-01
A radiation detector constructed of common household materials was developed at Oak Ridge National Laboratory (ORNL) by Cresson H. Kearny and has been referred to as the Kearny Fallout Meter (KFM). Developed during the height of the Cold War, the KFM was intended to place a radiation meter capable of measuring fallout from nuclear weapons in the hands of every U.S. citizen. Instructions for the construction of the meter, as well as information about radiation health effects, were developed in the form of multi-page newspaper insert. Subsequently, the sensitivity of the meter was refined by a high school teacher, Dr. Paul S. Lombardi, for use in demonstrations about radiation. The meter is currently being marketed for survivalists in light of potential radiation terrorist concerns. The KFM and Lombardi's variation of it are constructed and evaluated for this work. Calibrated tests of the response and variations in response are reported. A critique of the multi-page manual is made. In addition, the suitability of using such a detector, in terms of actual ease of construction and practical sensitivity, is discussed for its use in demonstrations and introductory classes on nuclear topics.
ERIC Educational Resources Information Center
Pfeiffer, Nils; Hagemann, Dirk; Backenstrass, Matthias
2011-01-01
In response to the low standards in short form development, Smith, McCarthy, and Anderson (2000) introduced a set of guidelines for the construction and evaluation of short forms of psychological tests. One of their recommendations requires researches to show that the variance overlap between the short form and its long form is adequate. This…
Hangar Fire Suppression Utilizing Novec 1230
2018-01-01
The public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing...fuel fires in aircraft hangars. A 30×30×8-ft concrete-and-steel test structure was constructed for this test series . Four discharge assemblies...structure. System discharge parameters---discharge time , discharge rate, and quantity of agent discharged---were adjusted to produce the desired Novec 1230
Elastomer mounted rotors - An alternative for smoother running turbomachinery
NASA Technical Reports Server (NTRS)
Tecza, J. A.; Jones, S. W.; Smalley, A. J.; Cunningham, R. E.; Darlow, M. S.
1979-01-01
This paper describes the design of elastomeric bearing supports for a rotor built to simulate the power turbine of an advanced gas turbine engine which traverses two bending critical speeds. The elastomer dampers were constructed so as to minimize rotor dynamic response at the critical speeds. Results are presented of unbalance response tests performed with two different elastomer materials. These results showed that the resonances on the elastomer-mounted rotor were well damped for both elastomer materials and showed linear response to the unbalance weights used for response testing. Additional tests were performed using solid steel supports at either end (hand-mounted), which resulted in drastically increased sensitivity and nonlinear response, and with steel supports in one end of the rotor and the elastomer at the other, which yielded results which were between the soft- and hard-mounted cases. It is concluded that elastomeric supports are a viable alternative to other methods of mounting flexible rotors, that damping was well in excess of predictions and that elastomeric supports are tolerant of small rotor misalignments.
The Effects of Work-Related Values on Communication Between R and D Groups. Part 2
NASA Technical Reports Server (NTRS)
Douds, Charles Fowler
1970-01-01
The methods are presented by which the scales and indicators are combined to provide measures of the variables used in the similarity propositions. These variables are constructs employed to describe the relationships among various phenomena occurring in R and D organizations. The character of these constructs as revealed by the characteristics of the measures derived from response patterns is presented. The reliability and validity of the measures are considered, and test procedures are discussed.
1988-04-01
Government-related pro- curement, the United States Government incurs no responsibility or any obli -j gation whatsoever. The fact that the Government...Arizona. NIIERI then began a program to deveiop a slurry mix design for use in the structure, as well as construction techniques for placing the SIFCON in...OBJECTIVES 3 II CONSTRUCTION AND FIELDING OPERATIONS 4 INTRODUCTION 4 I DEMONSTRATION PROGRAM 4 Introduct ion 4 Procedure 4 Results 7 $ DESIGN 7 I ntrod uc
Narrative means to manage responsibility in life narratives across adolescence.
De Silveira, Cybèle; Habermas, Tilmann
2011-01-01
Adolescence is a passage from dependence to adult responsibility. Alongside identity development, social-cognitive development, and the ability to construct a life story, adolescents become increasingly aware of both their potential responsibility in an expanded sphere of life and of complex, contextual influences on their lives. This was partially tested in a cross-sectional study, both in terms of linguistic means and content expressed in life narratives. Indicators were defined for narrative agency, grading of responsibility, serendipity, and turning points, and tested for age differences in relative frequencies in 102 life narratives from age groups of 8, 12, 16, and 20 years, balanced for gender. Narrative grading of responsibility, serendipity, and turning points increased throughout adolescence. The relative frequency of narrative agency, in contrast, remained constant across age groups. Results are interpreted in the context of adolescent development of narrative identity.
A polymer driveshaft for use in orbital and rotational atherectomy
NASA Astrophysics Data System (ADS)
Grothe, Preston Lee
Driveshafts used in atherectomy medical devices are often comprised of coiled or braided metal wires. These constructions are designed to tolerate delivery through tortuous vessels and can endure high speed rotation used during activation of the atherectomy treatment. This research investigated polymer driveshaft designs, which were comprised of polymer inner and outer layers, and coiled or braided stainless steel wires. The polymer driveshaft materials included polyimide, nylon 12, and polytetrafluoroethylene (PTFE). Mechanical testing of polymer driveshafts was conducted to determine material response in bending, tension, compression, and torsion. The polymer driveshaft test results were then compared with current coiled metal wire driveshaft constructions. The investigation identified polymer driveshaft options that could feasibly work in an atherectomy application.
NASA Technical Reports Server (NTRS)
Abbott, David; Ables, Jon; Batten, Adam; Carpenter, David; Collings, Tony; Doyle, Briony; Dunlop, John; Edwards, Graeme; Farmer, Tony; Gaffney, Bruce;
2008-01-01
This report provides an outline of the essential features of a Structural Health Monitoring Concept Demonstrator (CD) that will be constructed during the next eight months. It is emphasized that the design cannot be considered to be complete, and that design work will continue in parallel with construction and testing. A major advantage of the modular design is that small modules of the system can be developed, tested and modified before a commitment is made to full system development. The CD is expected to develop and evolve for a number of years after its initial construction. This first stage will, of necessity, be relatively simple and have limited capabilities. Later developments will improve all aspects of the functionality of the system, including sensing, processing, communications, intelligence and response. The report indicates the directions this later development will take.
Thompson, Angus H; Waye, Arianna
2018-06-01
Presenteeism (reduced productivity at work) is thought to be responsible for large economic costs. Nevertheless, much of the research supporting this is based on self-report questionnaires that have not been adequately evaluated. To examine the level of agreement among leading tests of presenteeism and to determine the inter-relationship of the two productivity subcategories, amount and quality, within the context of construct validity and method variance. Just under 500 health care workers from an urban health area were asked to complete a questionnaire containing the productivity items from eight presenteeism instruments. The analysis included an examination of test intercorrelations, separately for amount and quality, supplemented by principal-component analyses to determine whether either construct could be described by a single factor. A multitest, multiconstruct analysis was performed on the four tests that assessed both amount and quality to test for the relative contributions of construct and method variance. A total of 137 questionnaires were completed. Agreement among tests was positive, but modest. Pearson r ranges were 0 to 0.64 (mean = 0.32) for Amount and 0.03 to 0.38 (mean = 0.25) for Quality. Further analysis suggested that agreement was influenced more by method variance than by the productivity constructs the tests were designed to measure. The results suggest that presenteeism tests do not accurately assess work performance. Given their importance in the determination of policy-relevant conclusions, attention needs to be given to test improvement in the context of criterion validity assessment. Copyright © 2018 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.
Using the Rasch Measurement Model in Psychometric Analysis of the Family Effectiveness Measure
McCreary, Linda L.; Conrad, Karen M.; Conrad, Kendon J.; Scott, Christy K; Funk, Rodney R.; Dennis, Michael L.
2013-01-01
Background Valid assessment of family functioning can play a vital role in optimizing client outcomes. Because family functioning is influenced by family structure, socioeconomic context, and culture, existing measures of family functioning--primarily developed with nuclear, middle class European American families--may not be valid assessments of families in diverse populations. The Family Effectiveness Measure was developed to address this limitation. Objectives To test the Family Effectiveness Measure with data from a primarily low-income African American convenience sample, using the Rasch measurement model. Method A sample of 607 adult women completed the measure. Rasch analysis was used to assess unidimensionality, response category functioning, item fit, person reliability, differential item functioning by race and parental status, and item hierarchy. Criterion-related validity was tested using correlations with five other variables related to family functioning. Results The Family Effectiveness Measure measures two separate constructs: The effective family functioning construct was a psychometrically sound measure of the target construct that was more efficient due to the deletion of 22 items. The ineffective family functioning construct consisted of 16 of those deleted items but was not as strong psychometrically. Items in both constructs evidenced no differential item functioning by race. Criterion-related validity was supported for both. Discussion In contrast to the prevailing conceptualization that family functioning is a single construct, assessed by positively and negatively worded items, use of the Rasch analysis suggested the existence of two constructs. While the effective family functioning is a strong and efficient measure of family functioning, the ineffective family functioning will require additional item development and psychometric testing. PMID:23636342
Measurements of the response of transport aircraft ceiling panels to fuel pool fires
NASA Technical Reports Server (NTRS)
Bankston, C. P.; Back, L. H.
1985-01-01
Tests were performed to characterize the responses of various aircraft ceiling panel configurations to a simulated post-crash fire. Attention was given to one currently used and four new ceiling configurations exposed to a fuel pool fire in a circulated air enclosure. The tests were controlled to accurately represent conditions in a real fire. The panels were constructed of fiberglass-epoxy, graphite-phenolic resin, fiberglass-phenolic resin, Kevlar-epoxy, and Kevlar-phenolic resin materials. The phenolic resin-backed sheets performed the best under the circumstances, except when combined with Kevlar, which became porous when charred.
Input-output characterization of an ultrasonic testing system by digital signal analysis
NASA Technical Reports Server (NTRS)
Williams, J. H., Jr.; Lee, S. S.; Karagulle, H.
1986-01-01
Ultrasonic test system input-output characteristics were investigated by directly coupling the transmitting and receiving transducers face to face without a test specimen. Some of the fundamentals of digital signal processing were summarized. Input and output signals were digitized by using a digital oscilloscope, and the digitized data were processed in a microcomputer by using digital signal-processing techniques. The continuous-time test system was modeled as a discrete-time, linear, shift-invariant system. In estimating the unit-sample response and frequency response of the discrete-time system, it was necessary to use digital filtering to remove low-amplitude noise, which interfered with deconvolution calculations. A digital bandpass filter constructed with the assistance of a Blackman window and a rectangular time window were used. Approximations of the impulse response and the frequency response of the continuous-time test system were obtained by linearly interpolating the defining points of the unit-sample response and the frequency response of the discrete-time system. The test system behaved as a linear-phase bandpass filter in the frequency range 0.6 to 2.3 MHz. These frequencies were selected in accordance with the criterion that they were 6 dB below the maximum peak of the amplitude of the frequency response. The output of the system to various inputs was predicted and the results were compared with the corresponding measurements on the system.
The Bangor Voice Matching Test: A standardized test for the assessment of voice perception ability.
Mühl, Constanze; Sheil, Orla; Jarutytė, Lina; Bestelmeyer, Patricia E G
2017-11-09
Recognising the identity of conspecifics is an important yet highly variable skill. Approximately 2 % of the population suffers from a socially debilitating deficit in face recognition. More recently the existence of a similar deficit in voice perception has emerged (phonagnosia). Face perception tests have been readily available for years, advancing our understanding of underlying mechanisms in face perception. In contrast, voice perception has received less attention, and the construction of standardized voice perception tests has been neglected. Here we report the construction of the first standardized test for voice perception ability. Participants make a same/different identity decision after hearing two voice samples. Item Response Theory guided item selection to ensure the test discriminates between a range of abilities. The test provides a starting point for the systematic exploration of the cognitive and neural mechanisms underlying voice perception. With a high test-retest reliability (r=.86) and short assessment duration (~10 min) this test examines individual abilities reliably and quickly and therefore also has potential for use in developmental and neuropsychological populations.
Gottlieb, Daniel H.; Capitanio, John P.
2012-01-01
The human intruder test is a testing paradigm designed to measure rhesus macaques’ behavioral responses to a stressful and threatening situation. In the test, an unfamiliar human positions him/herself in various threatening positions relative to a caged macaque. This paradigm has been utilized for over twenty years to measure a variety of behavioral constructs, including fear and anxiety, behavioral inhibition, emotionality, and aggression. To date there have been no attempts to evaluate comprehensively the structure of the behavioral responses to the test. Our first goal was to identify the underlying latent factors affecting the different responses among subjects, and our second goal was determine if rhesus reared in different environments respond differently in this testing paradigm. To accomplish this, we first performed exploratory and confirmatory factor analyses on the behavioral responses of 3–4 month-old rhesus macaques, utilizing data from over 2,000 separate tests conducted between 2001–2007. Using the resulting model, we then tested to see whether early rearing experience affected responses in the test. Our first analyses suggested that most of the variation in infant behavioral responses to the human intruder test could be explained by four latent factors: “Activity,” “Emotionality,” “Aggression,” and “Displacement.” Our second analyses revealed a significant effect of rearing condition for each factor score (P < 0.001); most notable socially-reared animals had the lowest Activity score (P < 0.001), indoor mother-reared animals had the highest Displacement score (P < 0.001), and nursery-reared animals had the highest Emotionality (P < 0.001) and lowest Aggression scores (P < 0.001). These results demonstrate that this standardized testing paradigm reveals multiple patterns of response, which are influenced by an animal’s rearing history. PMID:23229557
Gottlieb, Daniel H; Capitanio, John P
2013-04-01
The human intruder test is a testing paradigm designed to measure rhesus macaques' behavioral responses to a stressful and threatening situation. In the test, an unfamiliar human positions him/herself in various threatening positions relative to a caged macaque. This paradigm has been utilized for over 20 years to measure a variety of behavioral constructs, including fear and anxiety, behavioral inhibition, emotionality, and aggression. To date, there have been no attempts to evaluate comprehensively the structure of the behavioral responses to the test. Our first goal was to identify the underlying latent factors affecting the different responses among subjects, and our second goal was to determine if rhesus reared in different environments respond differently in this testing paradigm. To accomplish this, we first performed exploratory and confirmatory factor analyses on the behavioral responses of 3- to 4-month-old rhesus macaques, utilizing data from over 2,000 separate tests conducted between 2001-2007. Using the resulting model, we then tested to see whether early rearing experience affected responses in the test. Our first analyses suggested that most of the variation in infant behavioral responses to the human intruder test could be explained by four latent factors: "activity," "emotionality," "aggression," and "displacement." Our second analyses revealed a significant effect of rearing condition for each factor score (P < 0.001); most notable socially reared animals had the lowest activity score (P < 0.001), indoor mother-reared animals had the highest displacement score (P < 0.001), and nursery-reared animals had the highest emotionality (P < 0.001) and lowest aggression scores (P < 0.001). These results demonstrate that this standardized testing paradigm reveals multiple patterns of response, which are influenced by an animal's rearing history. © 2012 Wiley Periodicals, Inc.
Responses of a constructed plant community to combinations of herbicides, a model for field tests?
As part of its regulation of pesticides, the US Environmental Protection Agency considers environmental risks, including impacts to nontarget plants exposed to pesticide drift. Normally these risk assessments consider impacts to individual species, using greenhouse, exposure-res...
Responses of constructed plant community to combinations of herbicides, a model for field tests?
As part of its regulation of pesticides, the US Environmental Protection Agency must consider environmental risks, including impacts to non-target plants exposed to pesticide drift. Normally these risk assessments consider impacts to individual species, using greenhouse, dose-re...
Reconsidering Formative Measurement
ERIC Educational Resources Information Center
Howell, Roy D.; Breivik, Einar; Wilcox, James B.
2007-01-01
The relationship between observable responses and the latent constructs they are purported to measure has received considerable attention recently, with particular focus on what has become known as formative measurement. This alternative to reflective measurement in the area of theory-testing research is examined in the context of the potential…
Psychometric properties of the Mayo Elbow Performance Score.
Celik, Derya
2015-06-01
To translate and culturally adapt the Mayo Elbow Performance Score (MEPS), a widely used instrument for evaluating disability associated with elbow injuries, into Turkish (MEPS-T) and to determine psychometric properties of the translated version. The MEPS was translated into Turkish using published methodological guidelines. The measurement properties of the MEPS-T (construct validity and floor and ceiling effects) were tested in 91 patients with elbow pathology. The reproducibility of the MEPS-T was tested in 59 patients over 7-14 days. The responsiveness of the MEPS-T was tested in a subgroup of 46 patients diagnosed with lateral epicondylitis and who received conservative treatment for 6 weeks. The interclass correlation coefficient (ICC) was used to estimate the test-retest reliability. The construct validity was analyzed with the disabilities of the arm, shoulder and hand (DASH), Visual Analog Scale (VAS) and the Short Form 36 (SF-36). Effect size (ES) was used to assess the responsiveness. The distribution of floor and ceiling effects was determined. The MEPS-T showed very good test-retest reliability (ICC 0.89). The correlation coefficients between the MEPS-T and DASH and VAS were -0.61 and -0.53, respectively (p < 0.001). The highest correlations were between the MEPS-T and the mental component summary (r = 0.47, p = 0.001) and role emotional (r = 0.45, p = 0.001). The MEPS-T ES, 0.50, was moderate (95% CI 0.33-0.62). We observed no ceiling or floor effects. The MEPS-T represents a valid, reliable and moderately responsive instrument for evaluating patients with elbow disease.
Persson, Roger; Orbaek, Palle; Ursin, Holger; Kecklund, Göran; Osterberg, Kai; Akerstedt, Torbjörn
2003-08-01
This study examined whether long workhours in combination with an extended workweek (12 hours/7 days), as requested by the workers, impaired attention and cognitive performance and whether the degree of hypothalamic-pituitary-adrenal (HPA) activation was related to the response to the performance tasks. A group of 41 male construction workers between 21 and 60 (mean 39) years of age who worked 84 hours a week, with alternate weeks off, was compared with a group of 23 male construction workers between 24 and 65 (mean 43) years of age who had a traditional 40-hour work schedule. Neurobehavioral test performance, self-ratings of fatigue and sleepiness, and salivary cortisol levels were evaluated in a counterbalanced repeated-measures design. The 84-hour group did not show any signs of reduced test performance or elevated fatigue and sleepiness. The 84-hour group had faster reaction times on day 7 than on days 1 and 5. Although the expected activation of the HPA axis was only found in the total study sample when workdays 1 and 5 were collapsed, the HPA activation can be considered normal. The results suggest that an 84-hour work regimen in response to requests from workers does not induce more performance deficits than an ordinary 40-hour workweek. An extended work schedule of 84 hours cannot in the short-term be considered to affect basic mental capabilities negatively.
Tong, W W; Wang, W; Xu, W D
2016-08-15
The Western Ontario Meniscal Evaluation Tool (WOMET) is a questionnaire designed to evaluate the health-related quality of life (HRQOL) of patients with meniscal pathology. Our study aims to culturally adapt and validate the WOMET into a Chinese version. We translated the WOMET into Chinese. Then, a total of 121 patients with meniscal pathology were invited to participate in this study. To assess the test-retest reliability, the Chinese version WOMET was completed twice at 7-day intervals by the participants. The construct validity was assessed using Pearson's correlation coefficient or Spearman's correlation to test for correlations among the Chinese version WOMET and the eight domains of Short Form-36 (SF-36), the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), and the International Knee Documentation Committee (IKDC) score. Responsiveness was tested by comparison of the preoperative and postoperative scores of the Chinese version WOMET. The test-retest reliability of the overall scale and different domains were all found to be excellent. The Cronbach's α was 0.90. The Chinese version WOMET correlated well with other questionnaires which suggested good construct validity. We observed no ceiling and floor effects of the Chinese version WOMET. We also found good responsiveness for the effect size, and the standardized response mean values were 0.86 and 1.11. The Chinese version of the WOMET appears to be reliable and valid in evaluating patients with meniscal pathology.
2012-01-01
Background Oestrogenic contaminants are widespread in the aquatic environment and have been shown to induce adverse effects in both wildlife (most notably in fish) and humans, raising international concern. Available detecting and testing systems are limited in their capacity to elucidate oestrogen signalling pathways and physiological impacts. Here we developed a transient expression assay to investigate the effects of oestrogenic chemicals in fish early life stages and to identify target organs for oestrogenic effects. To enhance the response sensitivity to oestrogen, we adopted the use of multiple tandem oestrogen responsive elements (EREc38) in a Tol2 transposon mediated Gal4ff-UAS system. The plasmid constructed (pTol2_ERE-TATA-Gal4ff), contains three copies of oestrogen response elements (3ERE) that on exposure to oestrogen induces expression of Gal4ff which this in turn binds Gal4-responsive Upstream Activated Sequence (UAS) elements, driving the expression of a second reporter gene, EGFP (Enhanced Green Fluorescent Protein). Results The response of our construct to oestrogen exposure in zebrafish embryos was examined using a transient expression assay. The two plasmids were injected into 1–2 cell staged zebrafish embryos, and the embryos were exposed to various oestrogens including the natural steroid oestrogen 17ß-oestradiol (E2), the synthetic oestrogen 17α- ethinyloestradiol (EE2), and the relatively weak environmental oestrogen nonylphenol (NP), and GFP expression was examined in the subsequent embryos using fluorescent microscopy. There was no GFP expression detected in unexposed embryos, but specific and mosaic expression of GFP was detected in the liver, heart, somite muscle and some other tissue cells for exposures to steroid oestrogen treatments (EE2; 10 ng/L, E2; 100 ng/L, after 72 h exposures). For the NP exposures, GFP expression was observed at 10 μg NP/L after 72 h (100 μg NP/L was toxic to the fish). We also demonstrate that our construct works in medaka, another model fish test species, suggesting the transient assay is applicable for testing oestrogenic chemicals in fish generally. Conclusion Our results indicate that the transient expression assay system can be used as a rapid integrated testing system for environmental oestrogens and to detect the oestrogenic target sites in developing fish embryos. PMID:22726887
Translation and validation of the German version of the Bournemouth Questionnaire for Neck Pain.
Soklic, Marina; Peterson, Cynthia; Humphreys, B Kim
2012-01-25
Clinical outcome measures are important tools to monitor patient improvement during treatment as well as to document changes for research purposes. The short-form Bournemouth questionnaire for neck pain patients (BQN) was developed from the biopsychosocial model and measures pain, disability, cognitive and affective domains. It has been shown to be a valid and reliable outcome measure in English, French and Dutch and more sensitive to change compared to other questionnaires. The purpose of this study was to translate and validate a German version of the Bournemouth questionnaire for neck pain patients. German translation and back translation into English of the BQN was done independently by four persons and overseen by an expert committee. Face validity of the German BQN was tested on 30 neck pain patients in a single chiropractic practice. Test-retest reliability was evaluated on 31 medical students and chiropractors before and after a lecture. The German BQN was then assessed on 102 first time neck pain patients at two chiropractic practices for internal consistency, external construct validity, external longitudinal construct validity and sensitivity to change compared to the German versions of the Neck Disability Index (NDI) and the Neck Pain and Disability Scale (NPAD). Face validity testing lead to minor changes to the German BQN. The Intraclass Correlation Coefficient for the test-retest reliability was 0.99. The internal consistency was strong for all 7 items of the BQN with Cronbach α's of .79 and .80 for the pre and post-treatment total scores. External construct validity and external longitudinal construct validity using Pearson's correlation coefficient showed statistically significant correlations for all 7 scales of the BQN with the other questionnaires. The German BQN showed greater responsiveness compared to the other questionnaires for all scales. The German BQN is a valid and reliable outcome measure that has been successfully translated and culturally adapted. It is shorter, easier to use, and more responsive to change than the NDI and NPAD.
Sung, Vivian W.; Griffith, James W.; Rogers, Rebecca G.; Raker, Christina A.; Clark, Melissa A.
2016-01-01
Purpose Current patient-reported outcomes for female urinary incontinence (UI) are limited by their inability to be tailored. Our objective is to describe the development and field-testing of 7 item banks designed to measure domains identified as important UI in females (UIf). We also describe the calibration and validation properties of the UIf-item banks, which allow for more efficient computerized-adaptive testing (CAT) in the future. METHODS The UIf-measures included 168 items covering 7 domains: Stress UI (SUI), Overactive Bladder (OAB), Urinary Frequency, Physical, Social and Emotional Health Impact, and Adaptation. Items underwent rigorous qualitative development and psychometric testing across 2 sites. Items were calibrated using item response theory and evaluated for internal consistency, construct validity and responsiveness. RESULTS 750 women (249 SUI, 249 OAB, and 252 mixed UI) participated. Mean age was 55±14 years ,23% were Hispanic, 80% white. In addition to face and content validity, the measures demonstrated good internal consistency (coefficient alpha 0.92-0.98) and unidimensionality. There was evidence for construct validity with moderate to strong correlations with the UDI (r’s ≥ 0.6) and IIQ (r’s = ≥ 0.6) scales. The measures were responsive to change for SUI treatment (paired t-test p <.001, ES range=1.3 to 2.9; SRM range=1.3 to 2.5) and OAB treatment (paired t-test p <.05 for all domains except Social Health Impact and Adaptation, ES range=.3 to 1.5, SRM range=0.4 to 1.0). The measures were responsive based on concurrent changes with the UDI and IIQ (p < 0.05). CAT versions were developed and pilot tested. CONCLUSIONS The UIf-item banks demonstrate good psychometric characteristics and are a sufficiently valid set of customizable tools for measuring UI symptoms and life impact. PMID:26732514
Kiltz, Uta; van der Heijde, Désirée; Boonen, Annelies; Akkoc, Nurullah; Bautista-Molano, Wilson; Burgos-Vargas, Ruben; Wei, James Cheng-Chung; Chiowchanwisawakit, Praveena; Dougados, Maxime; Duruoz, M Tuncay; Elzorkany, Bassel Kamal; Gaydukova, Inna; Gensler, Lianne S; Gilio, Michele; Grazio, Simeon; Gu, Jieruo; Inman, Robert D; Kim, Tae-Jong; Navarro-Compan, Victoria; Marzo-Ortega, Helena; Ozgocmen, Salih; Pimentel Dos Santos, Fernando; Schirmer, Michael; Stebbings, Simon; Van den Bosch, Filip E; van Tubergen, Astrid; Braun, Juergen
2018-06-01
To evaluate construct validity, interpretability, reliability and responsiveness as well as determination of cut-off points for good and poor health within the original English version and the 18 translations of the disease-specific Assessment of Spondyloarthritis international Society Health Index (ASAS HI) in 23 countries worldwide in patients with spondyloarthritis (SpA). A representative sample of patients with SpA fulfilling the ASAS classification criteria for axial (axSpA) or peripheral SpA was used. The construct validity of the ASAS HI was tested using Spearman correlation with several standard health outcomes for axSpA. Test-retest reliability was assessed by intraclass correlation coefficients (ICCs) in patients with stable disease (interval 4-7 days). In patients who required an escalation of therapy because of high disease activity, responsiveness was tested after 2-24weeks using standardised response mean (SRM). Among the 1548 patients, 64.9% were men, with a mean (SD) age 42.0 (13.4) years. Construct validity ranged from low (age: 0.10) to high (Bath AnkylosingSpondylitisFunctioning Index: 0.71). Internal consistency was high (Cronbach's α of 0.93). The reliability among 578 patients was good (ICC=0.87 (95% CI 0.84 to 0.89)). Responsiveness among 246 patients was moderate-large (SRM=-0.44 for non-steroidal anti-inflammatory drugs, -0.69 for conventional synthetic disease-modifying antirheumatic drug and -0.85 for tumour necrosis factor inhibitor). The smallest detectable change was 3.0. Values ≤5.0 have balanced specificity to distinguish good health as opposed to moderate health, and values ≥12.0 are specific to represent poor health as opposed to moderate health. The ASAS HI proved to be valid, reliable and responsive. It can be used to evaluate the impact of SpA and its treatment on functioning and health. Furthermore, comparison of disease impact between populations is possible. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.
A measurement model for general noise reaction in response to aircraft noise.
Kroesen, Maarten; Schreckenberg, Dirk
2011-01-01
In this paper a measurement model for general noise reaction (GNR) in response to aircraft noise is developed to assess the performance of aircraft noise annoyance and a direct measure of general reaction as indicators of this concept. For this purpose GNR is conceptualized as a superordinate latent construct underlying particular manifestations. This conceptualization is empirically tested through estimation of a second-order factor model. Data from a community survey at Frankfurt Airport are used for this purpose (N=2206). The data fit the hypothesized factor structure well and support the conceptualization of GNR as a superordinate construct. It is concluded that noise annoyance and a direct measure of general reaction to noise capture a large part of the negative feelings and emotions in response to aircraft noise but are unable to capture all relevant variance. The paper concludes with recommendations for the valid measurement of community reaction and several directions for further research.
Transient Thermal Testing and Analysis of a Thermally Insulating Structural Sandwich Panel
NASA Technical Reports Server (NTRS)
Blosser, Max L.; Daryabeigi, Kamran; Bird, Richard K.; Knutson, Jeffrey R.
2015-01-01
A core configuration was devised for a thermally insulating structural sandwich panel. Two titanium prototype panels were constructed to illustrate the proposed sandwich panel geometry. The core of one of the titanium panels was filled with Saffil(trademark) alumina fibrous insulation and the panel was tested in a series of transient thermal tests. Finite element analysis was used to predict the thermal response of the panel using one- and two-dimensional models. Excellent agreement was obtained between predicted and measured temperature histories.
DOT National Transportation Integrated Search
1999-05-01
The Ohio Department of Transportation constructed an experimental pavement for the Strategic Highway Research (SHRP) on U.S. 23 north of Columbus, which included 40 asphalt and concrete test sections in the SPS-1, 2, 8 and 9 experiments. These sectio...
Detecting Multidimensionality: Which Residual Data-Type Works Best?
ERIC Educational Resources Information Center
Linacre, John Michael
1998-01-01
Simulation studies indicate that, for responses to complete tests, construction of Rasch measures from observational data, followed by principal components factor analysis of Rasch residuals, provides an effective means of identifying multidimensionality. The most diagnostically useful residual form was found to be the standardized residual. (SLD)
Marginalized Women in West Iran
Malmir, Shabnam; Barati, Majid; Khani Jeihooni, Ali; Bashirian, Saeed; Hazavehei, Seyed Mohammad Mehdi
2018-03-27
Objective: This study aimed to determine the effectiveness of an educational intervention to prevent cervical cancer among marginalized Iranianwomen based on the Protection Motivation Theory (PMT) as a theoretical framework. Methods: This quasi-experimental study was carried out on 143 women of Kermanshah City in western Iran during 2017. Participants were recruited through cluster and simple random sampling and randomly divided into experimental (n=72) and control groups (n=71). All completed a self-administered questionnaire including PMT constructs and demographic variables. An intervention over six sessions was then applied to the experimental group. Reassessment was conducted three months after the intervention, with data was analyzed with SPSS-16 using chi-square, McNemar, paired T- and independent T-tests. Results: The mean scores for the constructs of PMT, and cervical cancer screening behavior showed no significant differences between the two groups before the intervention (P>0.05). The educational manipulation had significant effects on the experimental groups’ average response for perceived vulnerability, perceived severity, perceived reward, self-efficacy, response efficacy, response cost and protection motivation (all p < 0.001). Also, the prevalence of regular Pap smear testing and referral to health centers were significantly increased after 3 months in the experimental (P=0.048), but notthe control group (P>0.05). Conclusions: The results show that applying an educational intervention based on PMT might help prevent cervical cancer and improve regular Pap smear testing. Creative Commons Attribution License
Mars, Godelief M J; van Eijk, Jacques Th M; Post, Marcel W M; Proot, Ireen M; Mesters, Ilse; Kempen, Gertrudis I J M
2014-08-01
To develop and test the Maastricht Personal Autonomy Questionnaire (MPAQ), an instrument measuring personal autonomy of older adults with a chronic physical illness in accordance with their experience of autonomy. Achievement of personal autonomy is conceptualized as correspondence between the way people's lives are actually arranged and the way people want to arrange their lives. A field test was conducted in three waves (n = 412, n = 125 and n = 244) among a random sample of people older than 59 years with either chronic obstructive pulmonary disease or diabetes mellitus. Construct validity, reproducibility and responsiveness were evaluated. The MPAQ entailing 16 items consists of three scales: degree of (personal) autonomy, working on autonomy and dilemmas. Construct validity was largely supported by confirmatory factor analysis and correlations between the MPAQ and other instruments. Intraclass correlation coefficients ranged from 0.61 to 0.80 and SRDsgroup from 0.10 to 0.13. Mean change was larger (0.54) than was SRDgroup (0.11) in patients who had deteriorated, but smaller in patients who had improved (0.07). The MPAQ has good content and construct validity and moderate reproducibility. Responsiveness is weak, although better for deterioration than for improvement.
Bereza-Malcolm, Lara; Aracic, Sanja; Kannan, Ruban; Mann, Gülay; Franks, Ashley E
2017-08-15
Widespread presence of cadmium in soil and water systems is a consequence of industrial and agricultural processes. Subsequent accumulation of cadmium in food and drinking water can result in accidental consumption of dangerous concentrations. As such, cadmium environmental contamination poses a significant threat to human health. Development of microbial biosensors, as a novel alternative method for in situ cadmium detection, may reduce human exposure by complementing traditional analytical methods. In this study, a multiplex cadmium biosensing construct was assembled by cloning a single-output cadmium biosensor element, cadRgfp, and a constitutively expressed mrfp1 onto a broad-host range vector. Incorporation of the duplex fluorescent output [green and red fluorescence proteins] allowed measurement of biosensor functionality and viability. The biosensor construct was tested in several Gram-negative bacteria including Pseudomonas, Shewanella and Enterobacter. The multiplex cadmium biosensors were responsive to cadmium concentrations ranging from 0.01 to 10µgml -1 , as well as several other heavy metals, including arsenic, mercury and lead at similar concentrations. The biosensors were also responsive within 20-40min following exposure to 3µgml -1 cadmium. This study highlights the importance of testing biosensor constructs, developed using synthetic biology principles, in different bacterial genera. Copyright © 2017 Elsevier B.V. All rights reserved.
Holographic disk with high data transfer rate: its application to an audio response memory.
Kubota, K; Ono, Y; Kondo, M; Sugama, S; Nishida, N; Sakaguchi, M
1980-03-15
This paper describes a memory realized with a high data transfer rate using the holographic parallel-processing function and its application to an audio response system that supplies many audio messages to many terminals simultaneously. Digitalized audio messages are recorded as tiny 1-D Fourier transform holograms on a holographic disk. A hologram recorder and a hologram reader were constructed to test and demonstrate the holographic audio response memory feasibility. Experimental results indicate the potentiality of an audio response system with a 2000-word vocabulary and 250-Mbit/sec bit transfer rate.
Rey-Mermet, Alodie; Gade, Miriam; Oberauer, Klaus
2018-04-01
Inhibition is often conceptualized as a unitary construct reflecting the ability to ignore and suppress irrelevant information. At the same time, it has been subdivided into inhibition of prepotent responses (i.e., the ability to stop dominant responses) and resistance to distracter interference (i.e., the ability to ignore distracting information). The present study investigated the unity and diversity of inhibition as a psychometric construct, and tested the hypothesis of an inhibition deficit in older age. We measured inhibition in young and old adults with 11 established laboratory tasks: antisaccade, stop-signal, color Stroop, number Stroop, arrow flanker, letter flanker, Simon, global-local, positive and negative compatibility tasks, and n-2 repetition costs in task switching. In both age groups, the inhibition measures from individual tasks had good reliabilities, but correlated only weakly among each other. Structural equation modeling identified a 2-factor model with factors for inhibition of prepotent responses and resistance to distracter interference. Older adults scored worse in the inhibition of prepotent response, but better in the resistance to distracter interference. However, the model had low explanatory power. Together, these findings call into question inhibition as a psychometric construct and the hypothesis of an inhibition deficit in older age. (PsycINFO Database Record (c) 2018 APA, all rights reserved).
NASA Technical Reports Server (NTRS)
Smith, Andrew; LaVerde, Bruce; Teague, David; Gardner, Bryce; Cotoni, Vincent
2010-01-01
This presentation further develops the orthogrid vehicle panel work. Employed Hybrid Module capabilities to assess both low/mid frequency and high frequency models in the VA One simulation environment. The response estimates from three modeling approaches are compared to ground test measurements. Detailed Finite Element Model of the Test Article -Expect to capture both the global panel modes and the local pocket mode response, but at a considerable analysis expense (time & resources). A Composite Layered Construction equivalent global stiffness approximation using SEA -Expect to capture response of the global panel modes only. An SEA approximation using the Periodic Subsystem Formulation. A finite element model of a single periodic cell is used to derive the vibroacoustic properties of the entire periodic structure (modal density, radiation efficiency, etc. Expect to capture response at various locations on the panel (on the skin and on the ribs) with less analysis expense
Hift, Richard J
2014-11-28
Written assessments fall into two classes: constructed-response or open-ended questions, such as the essay and a number of variants of the short-answer question, and selected-response or closed-ended questions; typically in the form of multiple-choice. It is widely believed that constructed response written questions test higher order cognitive processes in a manner that multiple-choice questions cannot, and consequently have higher validity. An extensive review of the literature suggests that in summative assessment neither premise is evidence-based. Well-structured open-ended and multiple-choice questions appear equivalent in their ability to assess higher cognitive functions, and performance in multiple-choice assessments may correlate more highly than the open-ended format with competence demonstrated in clinical practice following graduation. Studies of construct validity suggest that both formats measure essentially the same dimension, at least in mathematics, the physical sciences, biology and medicine. The persistence of the open-ended format in summative assessment may be due to the intuitive appeal of the belief that synthesising an answer to an open-ended question must be both more cognitively taxing and similar to actual experience than is selecting a correct response. I suggest that cognitive-constructivist learning theory would predict that a well-constructed context-rich multiple-choice item represents a complex problem-solving exercise which activates a sequence of cognitive processes which closely parallel those required in clinical practice, hence explaining the high validity of the multiple-choice format. The evidence does not support the proposition that the open-ended assessment format is superior to the multiple-choice format, at least in exit-level summative assessment, in terms of either its ability to test higher-order cognitive functioning or its validity. This is explicable using a theory of mental models, which might predict that the multiple-choice format will have higher validity, a statement for which some empiric support exists. Given the superior reliability and cost-effectiveness of the multiple-choice format consideration should be given to phasing out open-ended format questions in summative assessment. Whether the same applies to non-exit-level assessment and formative assessment is a question which remains to be answered; particularly in terms of the educational effect of testing, an area which deserves intensive study.
Dynamic Analysis of an Office Building due to Vibration from Road Construction Activities
NASA Astrophysics Data System (ADS)
Chik, T. N. T.; Kamil, M. R. H.; Yusoff, N. A.; Ibrahim, M. H. W.
2018-04-01
Construction activities are widely known as one of the predominant sources of man-made vibrations that able to create nuisance towards any adjacent building, and this includes the road construction operations. Few studies conclude the construction-induced vibration may be harmful directly and indirectly towards the neighbouring building. This lead to the awareness of study the building vibration response of concrete masonry load bearing system and its vibrational performance towards the road construction activities. This study will simulate multi-storey office building of Sekolah Menengah Kebangsaan (SMK) Bandar Enstek at Negeri Sembilan by using finite element vibration analyses. The excitation of transient loads from ground borne vibrations which triggered by the road construction activities are modelled into the building. The vibration response was recorded during in-situ ambient vibration test by using Laser Doppler Vibrometer (LDV), which specifically performed on four different locations. The finite element simulation process was developed in the commercial FEA software ABAQUS. Then, the experimental data was processed and evaluated in MATLAB ModalV to assess the vibration criteria of the floor in building. As a result, the vibration level of floor in building is fall under VC-E curve which was under the maximum permissible level for office building (VC-ISO). The vibration level on floor is acceptable within the limit that have been referred.
Mathematical model for predicting human vertebral fracture
NASA Technical Reports Server (NTRS)
Benedict, J. V.
1973-01-01
Mathematical model has been constructed to predict dynamic response of tapered, curved beam columns in as much as human spine closely resembles this form. Model takes into consideration effects of impact force, mass distribution, and material properties. Solutions were verified by dynamic tests on curved, tapered, elastic polyethylene beam.
Psychometric Properties of the Revised Mathematics Anxiety Rating Scale
ERIC Educational Resources Information Center
Baloglu, Mustafa; Zelhart, Paul F.
2007-01-01
An exploratory factor analysis and several confirmatory analyses were performed to evaluate the factorial structure of the Revised Mathematics Anxiety Rating Scale (RMARS) through the responses of 805 college students. On 559 students' scores, the instrument's construct validity was tested through a confirmatory factor analysis (CFA) and was found…
Assessing Assertion: An Investigation of Construct Validity and Reliability.
ERIC Educational Resources Information Center
Kern, Jeffrey M.; MacDonald, Marian L.
The reliability and meaning of assertiveness tests were explored using 120 female undergraduates. Several self-report inventories (the College Self-Expression Scale, Conflict Resolution Inventory, and a global rating from one to seven) were administered, as were three anxiety measures (Timed Behavior Checklist, response latency, and response…
Self-Perceived Employability: Investigating the Responses of Post-Graduate Students
ERIC Educational Resources Information Center
Rothwell, Andrew; Jewell, Steven; Hardie, Marie
2009-01-01
This paper reports the further testing of a research instrument to examine the expectations and self-perceptions of employability of business students at post-graduate level, building on previously reported research with undergraduates [Rothwell, A., Herbert, I., & Rothwell, F. (2008). "Self perceived employability: Construction and initial…
Confirmatory factor analysis of the Infant Feeding Styles Questionnaire in Latino families.
Wood, Charles T; Perreira, Krista M; Perrin, Eliana M; Yin, H Shonna; Rothman, Russell L; Sanders, Lee M; Delamater, Alan M; Bentley, Margaret E; Bronaugh, Andrea B; Thompson, Amanda L
2016-05-01
Parent feeding practices affect risk of obesity in children. Latino children are at higher risk of obesity than the general population, yet valid measure of feeding practices, one of which is the Infant Feeding Styles Questionnaire (IFSQ), have not been formally validated in Spanish. To validate the IFSQ among Latino families, we conducted confirmatory factor analysis of pressuring, restrictive, and responsive feeding constructs from the IFSQ. The IFSQ was administered at the 12-month visit in the Greenlight study, a multi-center cluster randomized trial to prevent obesity. Parents were included if they were of Latino origin (n = 303) and completed an English or Spanish language modified IFSQ (without the indulgence construct). Scores from nine sub-constructs of the IFSQ were compared between English and Spanish language versions. We tested reliability with Cronbach's alpha coefficients and performed confirmatory factor analysis to examine factor loadings and goodness of fit characteristics, modifying constructs to achieve best fit. Of 303 parents completing the IFSQ, 84% were born outside the US, and 74% completed the IFSQ in Spanish. Reliability coefficients ranged from 0.28 to 0.61 for the laissez-faire sub-constructs and from 0.58 to 0.83 for the pressuring, restrictive, and responsive sub-constructs. Results for all coefficients were similar between participants responding to an English and Spanish version of the IFSQ. Goodness of fit indices ranged from CFI 0.82-1 and RMSEA 0.00-0.31, and the model performed best in pressuring-soothing (CFI 1.0, RMSEA 0.00) and restrictive-amount (CFI 0.98, RMSEA 0.1) sub-constructs. In a sample of Latino families, pressuring, restrictive, and responsive constructs performed well. The modified IFSQ in both English and Spanish-speaking Latino families may be used to assess parenting behaviors related to early obesity risk in this at-risk population. Copyright © 2016 Elsevier Ltd. All rights reserved.
Confirmatory Factor Analysis of the Infant Feeding Styles Questionnaire in Latino Families
Wood, Charles T.; Perreira, Krista M.; Perrin, Eliana M.; Yin, H. Shonna; Rothman, Russell L.; Sanders, Lee M.; Delamater, Alan M.; Bentley, Margaret E.; Bronaugh, Andrea B.; Thompson, Amanda L.
2016-01-01
Background Parent feeding practices affect risk of obesity in children. Latino children are at higher risk of obesity than the general population, yet valid measure of feeding practices, one of which is the Infant Feeding Styles Questionnaire (IFSQ), have not been formally validated in Spanish. Objective To validate the IFSQ among Latino families, we conducted confirmatory factor analysis of pressuring, restrictive, and responsive feeding constructs from the IFSQ. Design/Methods The IFSQ was administered at the 12-month visit in the Greenlight study, a multi-center cluster randomized trial to prevent obesity. Parents were included if they were of Latino origin (n=303) and completed an English or Spanish language modified IFSQ (without the indulgence construct). Scores from nine sub-constructs of the IFSQ were compared between English and Spanish language versions. We tested reliability with Cronbach’s alpha coefficients and performed confirmatory factor analysis to examine factor loadings and goodness of fit characteristics, modifying constructs to achieve best fit. Results Of 303 parents completing the IFSQ, 84% were born outside the US, and 74% completed the IFSQ in Spanish. Reliability coefficients ranged from 0.28–0.61 for the laissez-faire sub-constructs and from 0.58–0.83 for the pressuring, restrictive, and responsive sub-constructs. Results for all coefficients were similar between participants responding to an English and Spanish version of the IFSQ. Goodness of fit indices ranged from CFI 0.82–1 and RMSEA 0.00–0.31, and the model performed best in pressuring-soothing (CFI 1.0, RMSEA 0.00) and restrictive-amount (CFI 0.98, RMSEA 0.1) sub-constructs. Conclusions In a sample of Latino families, pressuring, restrictive, and responsive constructs performed well. The modified IFSQ in both English and Spanish-speaking Latino families may be used to assess parenting behaviors related to early obesity risk in this at-risk population. PMID:26876910
Bohórquez, José Alejandro; Defaus, Sira; Muñoz-González, Sara; Perez-Simó, Marta; Rosell, Rosa; Fraile, Lorenzo; Sobrino, Francisco; Andreu, David; Ganges, Llilianne
2017-06-15
Three dendrimeric peptides were synthesized in order to evaluate their immunogenicity and their potential protection against classical swine fever virus (CSFV) in domestic pigs. Construct 1, an optimized version of a previously used dendrimer, had four copies of a B-cell epitope derived from CSFV E2 glycoprotein connected to an also CSFV-derived T-cell epitope through maleimide instead of thioether linkages. Construct 2 was similarly built but included only two copies of the B-cell epitope, and in also bivalent construct 3 the CSFV T-cell epitope was replaced by a previously described one from the 3A protein of foot-and-mouth disease virus (FMDV). Animals were inoculated twice with a 21-day interval and challenged 15days after the second immunization. Clinical signs were recorded daily and ELISA tests were performed to detect antibodies against specific peptide and E2. The neutralising antibody response was assessed 13days after challenge. Despite the change to maleimide connectivity, only partial protection against CSFV was again observed. The best clinical protection was observed in group 3. Animals inoculated with constructs 2 and 3 showed higher anti-peptide humoral response, suggesting that two copies of the B-cell epitope are sufficient or even better than four copies for swine immune recognition. In addition, for construct 3 higher neutralizing antibody titres against CSFV were detected. Our results support the immunogenicity of the CSFV B-cell epitope and the cooperative role of the FMDV 3A T-cell epitope in inducing a neutralising response against CSFV in domestic pigs. This is also the first time that the FMDV T-cell epitope shows effectivity in improving swine immune response against a different virus. Our findings highlight the relevance of dendrimeric peptides as a powerful tool for epitope characterization and antiviral strategies development. Copyright © 2017 Elsevier B.V. All rights reserved.
The Script Concordance Test: a new tool assessing clinical judgement in neurology.
Lubarsky, Stuart; Chalk, Colin; Kazitani, Driss; Gagnon, Robert; Charlin, Bernard
2009-05-01
Clinical judgment, the ability to make appropriate decisions in uncertain situations, is central to neurological practice, but objective measures of clinical judgment in neurology trainees are lacking. The Script Concordance Test (SCT), based on script theory from cognitive psychology, uses authentic clinical scenarios to compare a trainee's judgment skills with those of experts. The SCT has been validated in several medical disciplines, but has not been investigated in neurology. We developed an Internet-based neurology SCT (NSCT) comprising 24 clinical scenarios with three to four questions each. The scenarios were designed to reflect the uncertainty of real-life clinical encounters in adult neurology. The questions explored aspects of the scenario in which several responses might be acceptable; trainees were asked to judge which response they considered to be best. Forty-one PGY1-PGY5 neurology residents and eight medical students from three North American neurology programs (McGill, Calgary, and Mayo Clinic) completed the NSCT. The responses of trainees to each question were compared with the aggregate responses of an expert panel of 16 attending neurologists. The NSCT demonstrated good reliability (Cronbach alpha = 0.79). Neurology residents scored higher than medical students and lower than attending neurologists, supporting the test's construct validity. Furthermore, NSCT scores discriminated between senior (PGY3-5) and junior residents (PGY1-2). Our NSCT is a practical and reliable instrument, and our findings support its construct validity for assessing judgment in neurology trainees. The NSCT has potentially widespread applications as an evaluation tool, both in neurology training and for licensing examinations.
Vispoel, Walter P; Kim, Han Yi
2014-09-01
[Correction Notice: An Erratum for this article was reported in Vol 26(3) of Psychological Assessment (see record 2014-16017-001). The mean, standard deviation and alpha coefficient originally reported in Table 1 should be 74.317, 10.214 and .802, respectively. The validity coefficients in the last column of Table 4 are affected as well. Correcting this error did not change the substantive interpretations of the results, but did increase the mean, standard deviation, alpha coefficient, and validity coefficients reported for the Honesty subscale in the text and in Tables 1 and 4. The corrected versions of Tables 1 and Table 4 are shown in the erratum.] Item response theory (IRT) models were applied to dichotomous and polytomous scoring of the Self-Deceptive Enhancement and Impression Management subscales of the Balanced Inventory of Desirable Responding (Paulhus, 1991, 1999). Two dichotomous scoring methods reflecting exaggerated endorsement and exaggerated denial of socially desirable behaviors were examined. The 1- and 2-parameter logistic models (1PLM, 2PLM, respectively) were applied to dichotomous responses, and the partial credit model (PCM) and graded response model (GRM) were applied to polytomous responses. For both subscales, the 2PLM fit dichotomous responses better than did the 1PLM, and the GRM fit polytomous responses better than did the PCM. Polytomous GRM and raw scores for both subscales yielded higher test-retest and convergent validity coefficients than did PCM, 1PLM, 2PLM, and dichotomous raw scores. Information plots showed that the GRM provided consistently high measurement precision that was superior to that of all other IRT models over the full range of both construct continuums. Dichotomous scores reflecting exaggerated endorsement of socially desirable behaviors provided noticeably weak precision at low levels of the construct continuums, calling into question the use of such scores for detecting instances of "faking bad." Dichotomous models reflecting exaggerated denial of the same behaviors yielded much better precision at low levels of the constructs, but it was still less precision than that of the GRM. These results support polytomous over dichotomous scoring in general, alternative dichotomous scoring for detecting faking bad, and extension of GRM scoring to situations in which IRT offers additional practical advantages over classical test theory (adaptive testing, equating, linking, scaling, detecting differential item functioning, and so forth). PsycINFO Database Record (c) 2014 APA, all rights reserved.
Tier One Performance Screen Initial Operational Test and Evaluation: 2012 Interim Report
2013-12-01
are known to predict outcomes in work settings. Because the TAPAS uses item response theory (IRT) methods to construct and score items, it can be...Qualification Test (AFQT), to select new Soldiers. Although the AFQT is useful for selecting new Soldiers, other personal attributes are important to...to be and will continue to serve as a useful metric for selecting new Soldiers, other personal attributes, in particular non-cognitive attributes
Dynamic Response of Reinforced Soil Systems. Volume 2. Appendices
1993-03-01
by a burster slab. These protection measures are costly, time consuming to construct, and sensitive to multiple strikes. Soil has been used to...load--deflection behavior of the reinforced soi I Dynamic puilout tests were then performed using the same parameters as the static tests. A standard...system was capable cf loading the sample in just a few micro-seconds to simulate a blast load. Dynamic load-deflection behavior was characterized and
Constructing Aligned Assessments Using Automated Test Construction
ERIC Educational Resources Information Center
Porter, Andrew; Polikoff, Morgan S.; Barghaus, Katherine M.; Yang, Rui
2013-01-01
We describe an innovative automated test construction algorithm for building aligned achievement tests. By incorporating the algorithm into the test construction process, along with other test construction procedures for building reliable and unbiased assessments, the result is much more valid tests than result from current test construction…
Shielding analyses for repetitive high energy pulsed power accelerators
NASA Astrophysics Data System (ADS)
Jow, H. N.; Rao, D. V.
Sandia National Laboratories (SNL) designs, tests and operates a variety of accelerators that generate large amounts of high energy Bremsstrahlung radiation over an extended time. Typically, groups of similar accelerators are housed in a large building that is inaccessible to the general public. To facilitate independent operation of each accelerator, test cells are constructed around each accelerator to shield it from the radiation workers occupying surrounding test cells and work-areas. These test cells, about 9 ft. high, are constructed of high density concrete block walls that provide direct radiation shielding. Above the target areas (radiation sources), lead or steel plates are used to minimize skyshine radiation. Space, accessibility and cost considerations impose certain restrictions on the design of these test cells. SNL Health Physics division is tasked to evaluate the adequacy of each test cell design and compare resultant dose rates with the design criteria stated in DOE Order 5480.11. In response, SNL Health Physics has undertaken an intensive effort to assess existing radiation shielding codes and compare their predictions against measured dose rates. This paper provides a summary of the effort and its results.
Aligned Carbon Nanotube Tape for Sensor Applications
NASA Technical Reports Server (NTRS)
Tucker, Dennis S.
2013-01-01
For this effort, will concentrate on three applications: Vibration Gyroscope utilizes piezoelectric properties of the tape and Coriolis effect Accelerometer utilizes the piezoresistive property Strain Gauge utilizes piezoresistive property Accelerometer and Strain Gauge can also utilize piezoelectric effect Test piezoelectric properties using facilities at the Microfabrication Laboratory (AMRDEC) . Enhance piezoelectric effect using polyvinylidine fluoride and P(VDF ]TrFE) which is readily polarizable .Spray matrix solution while winding fiber; Sandwich of CNT tape and PVDF film (DOE .Two Level) . Construct and test prototype vibration gyroscope . Construct and test prototype accelerometer using cantilever design . Test strain sensitivity of CNT tape against industrial strain gauge . Embed CNT tape in composite samples as well as on surface and test to failure (4 ]point bend) A piezoelectric device exhibits an electrical response from a mechanical applied stress. . A piezoelectric device has both capacitance and resistance properties in which by applying an electric field from a waveform will exert a mechanical stress that can be monitored for a response. . The typical waveform applied is a sinusoidal waveform of a defined voltage for a defined period. The defined voltage is driven from 0 volts to the positive defined volts then back to 0 and driven to negative defined volts then back to 0. . Example. Vmax set to 10V and period set to 10 ms. . Voltage will start at zero, go to 10 volts, return to zero, go to ]10 volts and return to zero during 10 ms. . Applying this electrical field to a DUT, the capacitance response and resistance response can be observed. CNT tape is easier to manufacture and cheaper than micromachining silicon or other ceramic piezoelectric used in gyroscopes and accelerometers CNT tape properties can be modified during manufacture for specific application CNT tape has enhanced mechanical and thermal properties in addition to unique electrical properties CNT tape as a strain gauge in Structural Health Monitoring will provide an excellent material to embed within composite structures
Imura, Tomoya; Takamura, Masahiro; Okazaki, Yoshihiro; Tokunaga, Satoko
2016-10-01
We developed a scale to measure time management and assessed its reliability and validity. We then used this scale to examine the impact of time management on psychological stress response. In Study 1-1, we developed the scale and assessed its internal consistency and criterion-related validity. Findings from a factor analysis revealed three elements of time management, “time estimation,” “time utilization,” and “taking each moment as it comes.” In Study 1-2, we assessed the scale’s test-retest reliability. In Study 1-3, we assessed the validity of the constructed scale. The results indicate that the time management scale has good reliability and validity. In Study 2, we performed a covariance structural analysis to verify our model that hypothesized that time management influences perceived control of time and psychological stress response, and perceived control of time influences psychological stress response. The results showed that time estimation increases the perceived control of time, which in turn decreases stress response. However, we also found that taking each moment as it comes reduces perceived control of time, which in turn increases stress response.
Huang, Wenhao; Chapman-Novakofski, Karen M
2017-01-01
Background The extensive availability and increasing use of mobile apps for nutrition-based health interventions makes evaluation of the quality of these apps crucial for integration of apps into nutritional counseling. Objective The goal of this research was the development, validation, and reliability testing of the app quality evaluation (AQEL) tool, an instrument for evaluating apps’ educational quality and technical functionality. Methods Items for evaluating app quality were adapted from website evaluations, with additional items added to evaluate the specific characteristics of apps, resulting in 79 initial items. Expert panels of nutrition and technology professionals and app users reviewed items for face and content validation. After recommended revisions, nutrition experts completed a second AQEL review to ensure clarity. On the basis of 150 sets of responses using the revised AQEL, principal component analysis was completed, reducing AQEL into 5 factors that underwent reliability testing, including internal consistency, split-half reliability, test-retest reliability, and interrater reliability (IRR). Two additional modifiable constructs for evaluating apps based on the age and needs of the target audience as selected by the evaluator were also tested for construct reliability. IRR testing using intraclass correlations (ICC) with all 7 constructs was conducted, with 15 dietitians evaluating one app. Results Development and validation resulted in the 51-item AQEL. These were reduced to 25 items in 5 factors after principal component analysis, plus 9 modifiable items in two constructs that were not included in principal component analysis. Internal consistency and split-half reliability of the following constructs derived from principal components analysis was good (Cronbach alpha >.80, Spearman-Brown coefficient >.80): behavior change potential, support of knowledge acquisition, app function, and skill development. App purpose split half-reliability was .65. Test-retest reliability showed no significant change over time (P>.05) for all but skill development (P=.001). Construct reliability was good for items assessing age appropriateness of apps for children, teens, and a general audience. In addition, construct reliability was acceptable for assessing app appropriateness for various target audiences (Cronbach alpha >.70). For the 5 main factors, ICC (1,k) was >.80, with a P value of <.05. When 15 nutrition professionals evaluated one app, ICC (2,15) was .98, with a P value of <.001 for all 7 constructs when the modifiable items were specified for adults seeking weight loss support. Conclusions Our preliminary effort shows that AQEL is a valid, reliable instrument for evaluating nutrition apps’ qualities for clinical interventions by nutrition clinicians, educators, and researchers. Further efforts in validating AQEL in various contexts are needed. PMID:29079554
Development of the Parent Responses to School Functioning Questionnaire.
Barber Garcia, Brittany N; Gray, Laura S; Simons, Laura E; Logan, Deirdre E
2017-10-01
Parents play an important role in supporting school functioning in youth with chronic pain, but no validated tools exists to assess parental responses to child and adolescent pain behaviors in the school context. Such a tool would be useful in identifying targets of change to reduce pain-related school impairment. The goal of this study was to develop and preliminarily validate the Parent Responses to School Functioning Questionnaire (PRSF), a parent self-report measure of this construct. After initial expert review and pilot testing, the measure was administered to 418 parents of children (ages 6-17 years) seen for initial multidisciplinary chronic pain clinic evaluation. The final 16-item PRSF showed evidence of good internal consistency (α = .82) and 2-week test-retest reliability (intraclass correlation coefficient = .87). Criterion validity was demonstrated by significant correlations with school absence rates and overall school functioning, and construct validity was demonstrated by correlations with general parental responses to pain. Three subscales emerged capturing parents' personal distress, parents' level of distrust of the school, and parents' expectations and behaviors related to their child's management of challenging school situations. These results provide preliminary support for the PRSF as a psychometrically sound tool to assess parents' responses to child pain in the school setting. The 16-item PRSF measures parental responses to their child's chronic pain in the school context. The clinically useful measure can inform interventions aimed reducing functional disability in children with chronic pain by enhancing parents' ability to respond adaptively to child pain behaviors. Copyright © 2017 American Pain Society. Published by Elsevier Inc. All rights reserved.
Reddy, Kotla S; Rashmi, Brabhi R; Dechamma, Hosur J; Gopalakrishna, Susarla; Banumathi, N; Suryanarayana, Veluvarthy V S; Reddy, Golla R
2012-05-01
Foot and mouth disease (FMD) can be controlled by regular vaccination and restriction of the movement of infected animals in the endemic countries. Although presently used, tissue culture inactivated vaccine gives protection, it has several limitations, including a short duration of immunity. DNA vaccine delivered through microparticles could comprise an alternative approach to conventional vaccine when aiming to circumvent these limitations. We constructed the expression plasmid (pVAC-1D) containing 1D gene FMD virus serotype Asia 1. Poly(D,L-lactide-co-glycolide) (PLG) microparticles were prepared and coated with the pVAC-1D plasmid. Guinea pigs were vaccinated with PLG-coated and naked DNA vaccine constructs intramuscularly. The humoral response was measured by an enzyme-linked immunosorbent assay (ELISA) and the serum neutralization test (SNT). Analysis of the persistence and the expression of pVAC-1D plasmid construct was carried out by quantitative polymerase chain reaction (qPCR). The humoral response lasted for 1 year, as measured by ELISA and SNT. Analysis of the persistence and the expression of pVAC-1D plasmid construct by qPCR has shown that pVAC-1D expression was seen for a longer duration compared to the naked DNA vaccine. Microparticles coated plasmid DNA-injected guinea pigs were protected when challenged with FMD virus. The present study has shown that the delivery of plasmid coated on cationic PLG microparticles enhance the duration of immunity of the DNA vaccine constructs. Copyright © 2012 John Wiley & Sons, Ltd.
Construct Validity of the Emotional Eating Scale Adapted for Children and Adolescents
Vannucci, Anna; Tanofsky-Kraff, Marian; Shomaker, Lauren B.; Ranzenhofer, Lisa M.; Matheson, Brittany E.; Cassidy, Omni L.; Zocca, Jaclyn M.; Kozlosky, Merel; Yanovski, Susan Z.; Yanovski, Jack A.
2012-01-01
Background Emotional eating, defined as eating in response to a range of negative emotions, is common in youth. Yet, there are few easily administered and well-validated methods to assess emotional eating in pediatric populations. Objective The current study tested the construct validity of the Emotional Eating Scale Adapted for Children and Adolescents (EES-C) by examining its relationship to observed emotional eating at laboratory test meals. Method One hundred fifty-one youth (8-18 years) participated in two multi-item lunch buffet meals on separate days. They ate ad libitum after being instructed to “eat as much as you would at a normal meal” or to “let yourself go and eat as much as you want.” State negative affect was assessed immediately prior to each meal. The EES-C was completed three months, on average, prior to the first test meal. Results Among youth with high EES-C total scores, but not low EES-C scores, higher pre-meal state negative affect was related to greater total energy intake at both meals, with and without the inclusion of age, race, sex, and BMI-z as covariates (ps < 0.03). Discussion The EES-C demonstrates good construct validity for children and adolescents’ observed energy intake across laboratory test meals designed to capture both normal and disinhibited eating. Future research is required to evaluate the construct validity of the EES-C in the natural environment and the predictive validity of the EES-C longitudinally. PMID:22124451
Design, building, and testing of the postlanding systems for the assured crew return vehicle
NASA Technical Reports Server (NTRS)
Hosterman, Kenneth C.; Anderson, Loren A.
1991-01-01
The design, building, and testing of the postlanding support systems for a water-landing Assured Crew Return Vehicle (ACRV) are presented. One ACRV will be permanently docked to Space Station Freedom, fulfilling NASA's commitment to Assured Crew Return Capability in the event of an accident or illness. The configuration of the ACRV is based on an Apollo Command Module (ACM) derivative. The 1990-1991 effort concentrated on the design, building, and testing of a one-fifth scale model of the egress and stabilization systems. The objective was to determine the feasibility of (1) stabilizing the ACM out of the range of motions that cause seasickness and (2) the safe and rapid removal of a sick or injured crew member from the ACRV. The development of the ACRV postlanding systems model was performed at the University of Central Florida with guidance from the Kennedy Space Center ACRV program managers. Emphasis was placed on four major areas. First was design and construction of a one-fifth scale model of the ACM derivative to accommodate the egress and stabilization systems for testing. Second was the identification of a water test facility suitable for testing the model in all possible configurations. Third was the construction of the rapid egress mechanism designed in the previous academic year for incorporation into the ACRV model. The fourth area was construction and motion response testing of the attitude ring and underwater parachute systems.
Stevens, Ken; Beyeler, Walt
1985-01-01
The construction of an exploratory shaft 12 feet in diameter into the Salado Formation (repository horizon for transuranic waste material) at the Waste Isolation Pilot Plant site in southeastern New Mexico affected water-levels in water-bearing zones above the repository horizon. By reading the construction history of the exploratory shaft, an approximation of construction-generated hydraulic stresses at the shaft was made. The magnitude of the construction-generated stresses was calibrated using the hydrographs from one hydrologic test pad. Whereas flow rates from the Magenta Dolomite and Culebra Dolomite Members in the Rustler Formation into the exploratory shaft were unknown, the ratio of transmissivity to storage (diffusivity) was determined by mathematically simulating the aquifers and the hydrologic stresses with flood-wave-response digital model. These results indicate that the Magenta Dolomite and Culebra Dolomite Members of the Rustler Formation can be modeled as homogeneous, isotropic, and confined water-bearing zones. One simple and consistent explanation, but by no means the only explanation, of the lack of a single diffusivity value in the Culebra aquifer is that the open-hole observation wells at the hydrologic test pads dampen the amplitude of water-level changes. (USGS)
Nuñez, S B; Medin, J A; Braissant, O; Kemp, L; Wahli, W; Ozato, K; Segars, J H
1997-03-14
Estrogen receptors regulate transcription of genes essential for sexual development and reproductive function. Since the retinoid X receptor (RXR) is able to modulate estrogen responsive genes and both 9-cis RA and fatty acids influenced development of estrogen responsive tumors, we hypothesized that estrogen responsive genes might be modulated by RXR and the fatty acid receptor (peroxisome proliferator-activated receptor, PPAR). To test this hypothesis, transfection assays in CV-1 cells were performed with an estrogen response element (ERE) coupled to a luciferase reporter construct. Addition of expression vectors for RXR and PPAR resulted in an 11-fold increase in luciferase activity in the presence of 9-cis RA. Furthermore, mobility shift assays demonstrated binding of RXR and PPAR to the vitellogenin A2-ERE and an ERE in the oxytocin promoter. Methylation interference assays demonstrated that specific guanine residues required for RXR/PPAR binding to the ERE were similar to residues required for ER binding. Moreover, RXR domain-deleted constructs in transfection assays showed that activation required RXR since an RXR delta AF-2 mutant completely abrogated reporter activity. Oligoprecipitation binding studies with biotinylated ERE and (35)S-labeled in vitro translated RXR constructs confirmed binding of delta AF-2 RXR mutant to the ERE in the presence of baculovirus-expressed PPAR. Finally, in situ hybridization confirmed RXR and PPAR mRNA expression in estrogen responsive tissues. Collectively, these data suggest that RXR and PPAR are present in reproductive tissues, are capable of activating estrogen responsive genes and suggest that the mechanism of activation may involve direct binding of the receptors to estrogen response elements.
Quantile regression models of animal habitat relationships
Cade, Brian S.
2003-01-01
Typically, all factors that limit an organism are not measured and included in statistical models used to investigate relationships with their environment. If important unmeasured variables interact multiplicatively with the measured variables, the statistical models often will have heterogeneous response distributions with unequal variances. Quantile regression is an approach for estimating the conditional quantiles of a response variable distribution in the linear model, providing a more complete view of possible causal relationships between variables in ecological processes. Chapter 1 introduces quantile regression and discusses the ordering characteristics, interval nature, sampling variation, weighting, and interpretation of estimates for homogeneous and heterogeneous regression models. Chapter 2 evaluates performance of quantile rankscore tests used for hypothesis testing and constructing confidence intervals for linear quantile regression estimates (0 ≤ τ ≤ 1). A permutation F test maintained better Type I errors than the Chi-square T test for models with smaller n, greater number of parameters p, and more extreme quantiles τ. Both versions of the test required weighting to maintain correct Type I errors when there was heterogeneity under the alternative model. An example application related trout densities to stream channel width:depth. Chapter 3 evaluates a drop in dispersion, F-ratio like permutation test for hypothesis testing and constructing confidence intervals for linear quantile regression estimates (0 ≤ τ ≤ 1). Chapter 4 simulates from a large (N = 10,000) finite population representing grid areas on a landscape to demonstrate various forms of hidden bias that might occur when the effect of a measured habitat variable on some animal was confounded with the effect of another unmeasured variable (spatially and not spatially structured). Depending on whether interactions of the measured habitat and unmeasured variable were negative (interference interactions) or positive (facilitation interactions), either upper (τ > 0.5) or lower (τ < 0.5) quantile regression parameters were less biased than mean rate parameters. Sampling (n = 20 - 300) simulations demonstrated that confidence intervals constructed by inverting rankscore tests provided valid coverage of these biased parameters. Quantile regression was used to estimate effects of physical habitat resources on a bivalve mussel (Macomona liliana) in a New Zealand harbor by modeling the spatial trend surface as a cubic polynomial of location coordinates.
The GlueX central drift chamber: Design and performance
DOE Office of Scientific and Technical Information (OSTI.GOV)
Van Haarlem, Y; Barbosa, F; Dey, B
2010-10-01
Tests and studies concerning the design and performance of the GlueX Central Drift Chamber (CDC) are presented. A full-scale prototype was built to test and steer the mechanical and electronic design. Small scale prototypes were constructed to test for sagging and to do timing and resolution studies of the detector. These studies were used to choose the gas mixture and to program a Monte Carlo simulation that can predict the detector response in an external magnetic field. Particle identification and charge division possibilities were also investigated.
Measuring Standards in Primary English: The Validity of PIRLS--A Response to Mary Hilton
ERIC Educational Resources Information Center
Whetton, Chris; Twist, Liz; Sainsbury, Marian
2007-01-01
Hilton (2006) criticises the PIRLS (Progress in International Reading Literacy Study) tests and the survey conduct, raising questions about the validity of international surveys of reading. Her criticisms fall into four broad areas: cultural validity, methodological issues, construct validity and the survey in England. However, her criticisms are…
Does Competition among Schools Encourage Grade Inflation?
ERIC Educational Resources Information Center
Walsh, Patrick
2010-01-01
This paper considers whether high schools in competitive environments use grade inflation to attract and retain families, perhaps in addition to more constructive responses. Two measures of grade inflation are used: the cutoffs used by each school to assign a letter grade to a percent score; and high school GPA after controlling for test scores, a…
Teachers and Technology: Development of an Extended Theory of Planned Behavior
ERIC Educational Resources Information Center
Teo, Timothy; Zhou, Mingming; Noyes, Jan
2016-01-01
This study tests the validity of an extended theory of planned behaviour (TPB) to explain teachers' intention to use technology for teaching and learning. Five hundred and ninety two participants completed a survey questionnaire measuring their responses to eight constructs which form an extended TPB. Using structural equation modelling, the…
Using Rasch Analysis to Identify Uncharacteristic Responses to Undergraduate Assessments
ERIC Educational Resources Information Center
Edwards, Antony; Alcock, Lara
2010-01-01
Rasch Analysis is a statistical technique that is commonly used to analyse both test data and Likert survey data, to construct and evaluate question item banks, and to evaluate change in longitudinal studies. In this article, we introduce the dichotomous Rasch model, briefly discussing its assumptions. Then, using data collected in an…
A Two-Parameter Latent Trait Model. Methodology Project.
ERIC Educational Resources Information Center
Choppin, Bruce
On well-constructed multiple-choice tests, the most serious threat to measurement is not variation in item discrimination, but the guessing behavior that may be adopted by some students. Ways of ameliorating the effects of guessing are discussed, especially for problems in latent trait models. A new item response model, including an item parameter…
Item Vector Plots for the Multidimensional Three-Parameter Logistic Model
ERIC Educational Resources Information Center
Bryant, Damon; Davis, Larry
2011-01-01
This brief technical note describes how to construct item vector plots for dichotomously scored items fitting the multidimensional three-parameter logistic model (M3PLM). As multidimensional item response theory (MIRT) shows promise of being a very useful framework in the test development life cycle, graphical tools that facilitate understanding…
DOT National Transportation Integrated Search
1993-12-01
Government agencies are burdened with both pavement distress and solid waste disposal problems. In response to these problems, the METRO agency of the Portland urban area sponsored the development of specifications and mix design guidelines for a rub...
The Development of a Questionnaire on Metacognition for Students in Higher Education
ERIC Educational Resources Information Center
Meijer, Joost; Sleegers, Peter; Elshout-Mohr, Marianne; van Daalen-Kapteijns, Maartje; Meeus, Wil; Tempelaar, Dirk
2013-01-01
Background: Interest in the role of metacognition has been steadily rising in most forms of education. This study focuses on the construction of a questionnaire for measuring metacognitive knowledge, metacognitive regulation and metacognitive responsiveness among students in higher education and the subsequent process of testing to determine its…
Federal Register 2010, 2011, 2012, 2013, 2014
2013-11-29
..., power reactors under construction, research and test reactors, agreement states, non-agreement states, as well as users of byproduct material (e.g. departments of health, medical centers, steel mills, well loggers, and radiographers.) 7. An estimate of the number of annual responses: 339. [[Page 71674...
Development of a hydraulic model of the human systemic circulation
NASA Technical Reports Server (NTRS)
Sharp, M. K.; Dharmalingham, R. K.
1999-01-01
Physical and numeric models of the human circulation are constructed for a number of objectives, including studies and training in physiologic control, interpretation of clinical observations, and testing of prosthetic cardiovascular devices. For many of these purposes it is important to quantitatively validate the dynamic response of the models in terms of the input impedance (Z = oscillatory pressure/oscillatory flow). To address this need, the authors developed an improved physical model. Using a computer study, the authors first identified the configuration of lumped parameter elements in a model of the systemic circulation; the result was a good match with human aortic input impedance with a minimum number of elements. Design, construction, and testing of a hydraulic model analogous to the computer model followed. Numeric results showed that a three element model with two resistors and one compliance produced reasonable matching without undue complication. The subsequent analogous hydraulic model included adjustable resistors incorporating a sliding plate to vary the flow area through a porous material and an adjustable compliance consisting of a variable-volume air chamber. The response of the hydraulic model compared favorably with other circulation models.
Gavett, Brandon E; Horwitz, Julie E
2012-03-01
The serial position effect shows that two interrelated cognitive processes underlie immediate recall of a supraspan word list. The current study used item response theory (IRT) methods to determine whether the serial position effect poses a threat to the construct validity of immediate list recall as a measure of verbal episodic memory. Archival data were obtained from a national sample of 4,212 volunteers aged 28-84 in the Midlife Development in the United States study. Telephone assessment yielded item-level data for a single immediate recall trial of the Rey Auditory Verbal Learning Test (RAVLT). Two parameter logistic IRT procedures were used to estimate item parameters and the Q(1) statistic was used to evaluate item fit. A two-dimensional model better fit the data than a unidimensional model, supporting the notion that list recall is influenced by two underlying cognitive processes. IRT analyses revealed that 4 of the 15 RAVLT items (1, 12, 14, and 15) were misfit (p < .05). Item characteristic curves for items 14 and 15 decreased monotonically, implying an inverse relationship between the ability level and the probability of recall. Elimination of the four misfit items provided better fit to the data and met necessary IRT assumptions. Performance on a supraspan list learning test is influenced by multiple cognitive abilities; failure to account for the serial position of words decreases the construct validity of the test as a measure of episodic memory and may provide misleading results. IRT methods can ameliorate these problems and improve construct validity.
Liao, Fang; He, Chao; Liu, Hai-Peng; Song, Qi-Fa; Yan, Jie
2006-11-01
To clone PIB gene of Neisseria gonorrhoeae, and to construct a recombinant eukaryotic expression vector pCI-PIB and to understand the effects of pCI-PIB vaccination in mice to induce specific humoral and cellular immune responses. The entire PIB gene of Neisseria gonorrhoeae (960 bp) was amplified by using PCR. An eukaryotic eukaryotic vector pCI-PIB was then constructed. BALB/c mice (n = 65, 100 microg/time/mouse) were immunized with pCI-PIB by intramuscular injection. ABC assay was employed to examine the PIB expression in muscular cells of the pCI-PIB-immunized mice (n = 10). ELISA and MTT assays were used to measure the effects of humoral and cellular immune responses of the remaining pCI-PIB-immunized mice. By using slide agglutination test and complement bacteriolytic test, the serum anti-bacterial activity of the pCI-PIB immunized mice was determined. The entire PIB gene amplification fragment of the expected size (960 bp) was successfully obtained by PCR. In comparison with the reported PIB gene sequence (GenBank No: AF090801), the homology of nucleotide sequence of the target inserted fragment in the recombinant plasmid pCI-PIB was as high as 99.28%. The muscular cells of the immunized mice could take in pCI-PIB and then express PIB. In the pCI-PIB immunized mice, the higher titer (1:4000) of specific serum IgG and the specific T lymphocyte response were found. The proliferation index (4.031) was significantly higher than that of the controls (1.127) (t = 71.71, P < 0.05). The sera and washings from the pCI-PIB immunized mice could agglutinate Neisseria gonorrhoeae and kill this microbe in presence of complements. In this study we successfully constructed a recombinant eukaryotic expression vector pCI-PIB. The mice inoculated with pCI-PIB might efficiently produce the specific humoral and cellular immune responses, suggesting that pCI-PIB should be potential service as a candidate of Neisseria gonorrhoeae DNA vaccines.
Applying cognitive acuity theory to the development and scoring of situational judgment tests.
Leeds, J Peter
2017-11-09
The theory of cognitive acuity (TCA) treats the response options within items as signals to be detected and uses psychophysical methods to estimate the respondents' sensitivity to these signals. Such a framework offers new methods to construct and score situational judgment tests (SJT). Leeds (2012) defined cognitive acuity as the capacity to discern correctness and distinguish between correctness differences among simultaneously presented situation-specific response options. In this study, SJT response options were paired in order to offer the respondent a two-option choice. The contrast in correctness valence between the two options determined the magnitude of signal emission, with larger signals portending a higher probability of detection. A logarithmic relation was found between correctness valence contrast (signal stimulus) and its detectability (sensation response). Respondent sensitivity to such signals was measured and found to be related to the criterion variables. The linkage between psychophysics and elemental psychometrics may offer new directions for measurement theory.
Masuda, Akane; Masuda, Miyabi; Kawano, Takuya; Kitsunai, Yoko; Nakayama, Haruka; Nakajima, Hiroyuki; Kojima, Hiroyuki; Kitamura, Shigeyuki; Uramaru, Naoto; Hosaka, Takuomi; Sasaki, Takamitsu; Yoshinari, Kouichi
2017-01-01
Liver and hepatocyte hypertrophy can be induced by exposure to chemical compounds, but the mechanisms and toxicological characteristics of these phenomena have not yet been investigated extensively. In particular, it remains unclear whether the hepatocyte hypertrophy induced by chemical compounds should be judged as an adaptive response or an adverse effect. Thus, understanding of the toxicological characteristics of hepatocyte hypertrophy is of great importance to the safety evaluation of pesticides and other chemical compounds. To this end, we have constructed a database of potentially toxic pesticides. Using risk assessment reports of pesticides that are publicly available from the Food Safety Commission of Japan, we extracted all observations/findings that were based on 90-day subacute toxicity tests and 2-year chronic toxicity and carcinogenicity tests in rats. Analysis of the database revealed that hepatocyte hypertrophy was observed for 37-47% of the pesticides investigated (varying depending on sex and testing period), and that centrilobular hepatocyte hypertrophy was the most frequent among the various types of hepatocyte hypertrophy in both the 90-day and 2-year studies. The database constructed in this study enables us to investigate the relationships between hepatocyte hypertrophy and other toxicological observations/findings, and thus will be useful for characterizing hepatocyte hypertrophy.
Van de Velde, Dominique; Coorevits, Pascal; Sabbe, Lode; De Baets, Stijn; Bracke, Piet; Van Hove, Geert; Josephsson, Staffan; Ilsbroukx, Stephan; Vanderstraeten, Guy
2017-03-01
To examine the internal consistency, test-retest reliability, construct validity, discriminant validity and responsiveness of the Ghent Participation Scale. Cross-sectional study with a test-retest sample. Six outpatient rehabilitation centres in Belgium. A total of 365 outpatients from eight diagnostic groups. The Ghent Participation Scale, the Impact on Participation and Autonomy, the Utrecht Scale for Evaluation of Rehabilitation-Participation and the Medical outcome study Short Form SF-36. The Ghent Participation Scale was found to have good internal consistency (Cronbach's α between 0.75 and 0.83). At item level, the test-retest reliability was good; weighted kappas ranged between 0.57 and 0.88. On the dimension level intraclass correlation coefficients ranged between 0.80 and 0.90. Evidence for construct validity came from high correlations between the subscales of the Ghent Participation Scale and four subscales of the Impact on Participation and Autonomy (range, r = -0.71 to -0.87) and two subscales of the Utrecht Scale for Evaluation of Rehabilitation-Participation (range, r = 0.54 to 0.72). Standardized response mean ranged between 0.23 and 0.68 and the area under the curve ranged between 68% and 88%. The Ghent Participation Scale appears to be a valid and reliable method of assessing participation irrespective of the respondent's health condition. The Ghent Participation Scale is responsive and is able to detect changes over time.
Validity and cultural equivalence of the standard Greene Climacteric Scale in Hong Kong.
Chen, Run Qiu; Davis, Susan R; Wong, Chit Ming; Lam, Tai Hing
2010-01-01
The aim of this study was to translate the standard Greene Climacteric Scale (GCS) and a urogenital symptom scale into colloquial Chinese (Hong Kong) and test their validity and reliability in Hong Kong Chinese women. The scales were translated with standard techniques, and cross-cultural construct validity, internal consistency, test-retest reliability, and responsiveness were tested on samples of women aged 40 to 60 years recruited from the community. A total of 611 women, with mean (SD) age of 48.9 (5.3) years, provided completed scales for the study. Confirmatory factor analysis demonstrated construct validity of the translated standard GCS. The items were found to have good homogeneity in measuring the scale concepts (Cronbach alpha > 0.7). But the three-item urogenital scale had poor internal consistency (Cronbach alpha = 0.43), and a combination of this scale with the standard GCS resulted in a reduced model fit to the data. Test-retest reliability for the GCS was good on women recruited for a retest (n = 52). The translated GCS was found to be responsive to change over time (effect size, 0.59; n = 19). The Chinese (Hong Kong) version of the standard GCS is a valid and cultural-equivalent instrument. Our data do not support inclusion of the urogenital scale to the standard GCS. Measurement of urogenital symptoms is subject to further study.
Iwata, Noboru; Kikuchi, Kenichi; Fujihara, Yuya
2016-08-01
An innovative measurement system using a computerized adaptive testing technique based on the item response theory (CAT) has been expanding to measure mental health status. However, little is known about details in its measurement properties based on the empirical data. Moreover, the response time (RT) data, which are not available by a paper-and-pencil measurement but available by a computerized measurement, would be worth investigating for exploring the response behavior. We aimed at constructing the CAT to measure depressive symptomatology in a community population and exploring its measurement properties. Also, we examined the relationships between RTs, individual item responses, and depressive levels. For constructing the CAT system, responses of 2061 workers and university students to 24 depression scale plus four negatively revised positive affect items were subjected to a polytomous IRT analysis. The stopping rule was set for standard error of estimation < 0.30 or the maximum 15 items displayed. The CAT and non-adaptive computer-based test (CBT) were administered to 209 undergraduates, and 168 of them administered again after 1 week. On average, the CAT was converged by 10.4 items. The θ values estimated by CAT and CBT were highly correlated (r = 0.94 and 0.95 for the 1st and 2nd measurements) and with the traditional scoring procedures (r's > 0.90). The test-retest reliability was at a satisfactory level (r = 0.86). RTs to some items significantly correlated with the θ estimates. The mean RT varied by the item contents and wording, i.e., the RT to positive affect items required additional 2 s or longer than the other subscale items. The CAT would be a reliable and practical measurement tool for various purposes including stress check at workplace.
Thermoviscoelastic characterization and prediction of Kevlar/epoxy composite laminates
NASA Technical Reports Server (NTRS)
Gramoll, K. C.; Dillard, D. A.; Brinson, H. F.
1990-01-01
The thermoviscoelastic characterization of Kevlar 49/Fiberite 7714A epoxy composite lamina and the development of a numerical procedure to predict the viscoelastic response of any general laminate constructed from the same material were studied. The four orthotropic material properties, S sub 11, S sub 12, S sub 22, and S sub 66, were characterized by 20 minute static creep tests on unidirectional (0) sub 8, (10) sub 8, and (90) sub 16 lamina specimens. The Time-Temperature Superposition-Principle (TTSP) was used successfully to accelerate the characterization process. A nonlinear constitutive model was developed to describe the stress dependent viscoelastic response for each of the material properties. A numerical procedure to predict long term laminate properties from lamina properties (obtained experimentally) was developed. Numerical instabilities and time constraints associated with viscoelastic numerical techniques were discussed and solved. The numerical procedure was incorporated into a user friendly microcomputer program called Viscoelastic Composite Analysis Program (VCAP), which is available for IBM PC type computers. The program was designed for ease of use. The final phase involved testing actual laminates constructed from the characterized material, Kevlar/epoxy, at various temperatures and load level for 4 to 5 weeks. These results were compared with the VCAP program predictions to verify the testing procedure and to check the numerical procedure used in the program. The actual tests and predictions agreed for all test cases which included 1, 2, 3, and 4 fiber direction laminates.
Haugum, Mona; Iversen, Hilde Hestad; Bjertnaes, Oyvind; Lindahl, Anne Karin
2017-02-20
Patient experiences are an important aspect of health care quality, but there is a lack of validated instruments for their measurement in the substance dependence literature. A new questionnaire to measure inpatients' experiences of interdisciplinary treatment for substance dependence has been developed in Norway. The aim of this study was to psychometrically test the new questionnaire, using data from a national survey in 2013. The questionnaire was developed based on a literature review, qualitative interviews with patients, expert group discussions and pretesting. Data were collected in a national survey covering all residential facilities with inpatients in treatment for substance dependence in 2013. Data quality and psychometric properties were assessed, including ceiling effects, item missing, exploratory factor analysis, and tests of internal consistency reliability, test-retest reliability and construct validity. The sample included 978 inpatients present at 98 residential institutions. After correcting for excluded patients (n = 175), the response rate was 91.4%. 28 out of 33 items had less than 20.5% of missing data or replies in the "not applicable" category. All but one item met the ceiling effect criterion of less than 50.0% of the responses in the most favorable category. Exploratory factor analysis resulted in three scales: "treatment and personnel", "milieu" and "outcome". All scales showed satisfactory internal consistency reliability (Cronbach's alpha ranged from 0.75-0.91) and test-retest reliability (ICC ranged from 0.82-0.85). 17 of 18 significant associations between single variables and the scales supported construct validity of the PEQ-ITSD. The content validity of the PEQ-ITSD was secured by a literature review, consultations with an expert group and qualitative interviews with patients. The PEQ-ITSD was used in a national survey in Norway in 2013 and psychometric testing showed that the instrument had satisfactory internal consistency reliability and construct validity.
Suderman, Bethany L; Hoover, Ryan W; Ching, Randal P; Scher, Irving S
2014-12-01
We evaluated the effectiveness of hardhats in attenuating head acceleration and neck force in vertical impacts from large construction objects. Two weight-matched objects (lead shot bag and concrete block) weighing 9.1 kg were dropped from three heights (0.91 m, 1.83 m and 2.74 m) onto the head of a 50th percentile male Hybrid III anthropomorphic test device (ATD). Two headgear conditions were tested: no head protection and an ANSI Type-I, Class-E hardhat. A third headgear condition (snow sport helmet) was tested at 1.83 m for comparison with the hardhat. Hardhats significantly reduced the resultant linear acceleration for the concrete block impacts by 70-95% when compared to the unprotected head condition. Upper neck compression was also significantly reduced by 26-60% with the use of a hardhat when compared to the unprotected head condition for the 0.91 and 1.83 m drop heights for both lead shot and concrete block drop objects. In this study we found that hardhats can be effective in reducing both head accelerations and compressive neck forces for large construction objects in vertical impacts. Copyright © 2014 Elsevier Ltd. All rights reserved.
NASA Technical Reports Server (NTRS)
Lo, Ching F.
1999-01-01
The integration of Radial Basis Function Networks and Back Propagation Neural Networks with the Multiple Linear Regression has been accomplished to map nonlinear response surfaces over a wide range of independent variables in the process of the Modem Design of Experiments. The integrated method is capable to estimate the precision intervals including confidence and predicted intervals. The power of the innovative method has been demonstrated by applying to a set of wind tunnel test data in construction of response surface and estimation of precision interval.
Kutlay, Sehim; Kuçukdeveci, Ayse A; Elhan, Atilla H; Yavuzer, Gunes; Tennant, Alan
2007-02-28
Assessment of cognitive impairment with a valid cognitive screening tool is essential in neurorehabilitation. The aim of this study was to test the reliability and validity of the Turkish-adapted version of the Middlesex Elderly Assessment of Mental State (MEAMS) among acquired brain injury patients in Turkey. Some 155 patients with acquired brain injury admitted for rehabilitation were assessed by the adapted version of MEAMS at admission and discharge. Reliability was tested by internal consistency, intra-class correlation coefficient (ICC) and person separation index; internal construct validity by Rasch analysis; external construct validity by associations with physical and cognitive disability (FIM); and responsiveness by Effect Size. Reliability was found to be good with Cronbach's alpha of 0.82 at both admission and discharge; and likewise an ICC of 0.80. Person separation index was 0.813. Internal construct validity was good by fit of the data to the Rasch model (mean item fit -0.178; SD 1.019). Items were substantially free of differential item functioning. External construct validity was confirmed by expected associations with physical and cognitive disability. Effect size was 0.42 compared with 0.22 for cognitive FIM. The reliability and validity of the Turkish version of MEAMS as a cognitive impairment screening tool in acquired brain injury has been demonstrated.
Drake, David; Kennedy, Rodney; Wallace, Eric
2017-12-01
Researchers and practitioners working in sports medicine and science require valid tests to determine the effectiveness of interventions and enhance understanding of mechanisms underpinning adaptation. Such decision making is influenced by the supportive evidence describing the validity of tests within current research. The objective of this study is to review the validity of lower body isometric multi-joint tests ability to assess muscular strength and determine the current level of supporting evidence. Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA) guidelines were followed in a systematic fashion to search, assess and synthesize existing literature on this topic. Electronic databases such as Web of Science, CINAHL and PubMed were searched up to 18 March 2015. Potential inclusions were screened against eligibility criteria relating to types of test, measurement instrument, properties of validity assessed and population group and were required to be published in English. The Consensus-based Standards for the Selection of health Measurement Instruments (COSMIN) checklist was used to assess methodological quality and measurement property rating of included studies. Studies rated as fair or better in methodological quality were included in the best evidence synthesis. Fifty-nine studies met the eligibility criteria for quality appraisal. The ten studies that rated fair or better in methodological quality were included in the best evidence synthesis. The most frequently investigated lower body isometric multi-joint tests for validity were the isometric mid-thigh pull and isometric squat. The validity of each of these tests was strong in terms of reliability and construct validity. The evidence for responsiveness of tests was found to be moderate for the isometric squat test and unknown for the isometric mid-thigh pull. No tests using the isometric leg press met the criteria for inclusion in the best evidence synthesis. Researchers and practitioners can use the isometric squat and isometric mid-thigh pull with confidence in terms of reliability and construct validity. Further work to investigate other validity components such as criterion validity, smallest detectable change and responsiveness to resistance exercise interventions may be beneficial to the current level of evidence.
A mercury flow meter for ion thruster testing. [response time, thermal sensitivity
NASA Technical Reports Server (NTRS)
Wilbur, P. J.
1973-01-01
The theory of operation of the thermal flow meter is presented, and a theoretical model is used to determine design parameters for a device capable of measuring mercury flows in the range of 0 to 5 gm/hr. Flow meter construction is described. Tests performed using a positive displacement mercury pump as well as those performed with the device in the feed line of an operating thruster are discussed. A flow meter response time of about a minute and a sensitivity of about 10 mv/gm/hr are demonstrated. Additional work to relieve a sensitivity of the device to variations in ambient temperature is indicated to improve its quantitative performance.
Construction of ferrocene modified conducting polymer based amperometric urea biosensor.
Dervisevic, Muamer; Dervisevic, Esma; Senel, Mehmet; Cevik, Emre; Yildiz, Huseyin Bekir; Camurlu, Pınar
2017-07-01
Herein, an electrochemical urea sensing bio-electrode is reported that has been constructed by firstly electropolymerizing 4-(2,5-Di(thiophen-2-yl)-1H-pyrrol-1-yl)aniline monomer (SNS-Aniline) on Pencil Graphite Electrode (PGE), then modifying the polymer coated electrode surface with di-amino-Ferrocene (DAFc) as the mediator, and lastly Urease enzyme through glutaraldehyde crosslinking. The effect of pH, temperature, polymer thickness, and applied potential on the electrode current response was investigated besides performing storage and operational stability experiments with the interference studies. The resulting urea biosensor's amperometric response was linear in the range of 0.1-8.5mM with the sensitivity of 0.54μA/mM, detection limit of 12μM, and short response time of 2s. The designed bio-electrode was tested with real human blood and urine samples where it showed excellent analytical performance with insignificant interference. Copyright © 2017 Elsevier Inc. All rights reserved.
Hegedish, Omer; Kivilis, Naama; Hoofien, Dan
2015-01-01
The Temporal Memory Sequence Test (TMST) is a new measure of negative response bias (NRB) that was developed to enrich the forced-choice paradigm. The TMST does not resemble the common structure of forced-choice tests and is presented as a temporal recall memory test. The validation sample consisted of 81 participants: 21 healthy control participants, 20 coached simulators, and 40 patients with acquired brain injury (ABI). The TMST had high reliability and significantly high positive correlations with the Test of Memory Malingering and Word Memory Test effort scales. Moreover, the TMST effort scales exhibited high negative correlations with the Glasgow Coma Scale, thus validating the previously reported association between probable malingering and mild traumatic brain injury. A suggested cutoff score yielded acceptable classification rates in the ABI group as well as in the simulator and control groups. The TMST appears to be a promising measure of NRB detection, with respectable rates of reliability and construct and criterion validity.
NASA Astrophysics Data System (ADS)
Chevrot, S.; Wang, Y.; Monteiller, V.; Komatitsch, D.; Martin, R.
2016-12-01
Measuring fracture mechanical behavior in response to changes in fluid pressure is critical for understanding flow through petroleum reservoirs, predicting hydrothermal responses in geothermal fields, and monitoring geologic carbon sequestration injection. Distributed acoustic sensing (DAS) is new, but commercially available fiber optic technology that offers a novel approach to characterize fractured bedrock systems. DAS was originally designed to measure the amplitude, frequency, and phase of an acoustic wave, and is therefore capable of detecting strains at exceedingly small scales. Though normally used to measure frequencies in the Hz to kHz range, we adapted DAS to measure fracture displacements in response to periodic hydraulic pulses in the mHz frequency range. A field experiment was conducted in a fractured bedrock aquifer to test the ability of DAS to measure fracture mechanical response to oscillatory well tests. Fiber optic cable was deployed in a well, and coupled to the borehole wall using a flexible impermeable liner designed with an air coupled transducer to measure fluid pressure at the target fracture zone. Two types of cable were tested, a loose tube and tight buffered, to determine the effects of cable construction. Both strain and pressure were measured across the known fracture zone hydraulically connected to a well 30 m away. The companion well was subjected to alternating pumping and injection with periods between 2 and 18 minutes. Raw DAS data were collected as strain rate measured every 0.25 m along the fiber with a gauge length of 10 m, at a sampling rate of 1 kHz. Strain rate was converted to strain by integrating with respect to time. DAS measured periodic strains of less than 1 nm/m in response to periodic injection and pumping at the companion well. Strain was observed by DAS only at the depth of the hydraulically connected fracture zone. Thus, the magnitude and response of the strain could be both localized with depth and measured quantitatively. The tight buffered cable was found to be twice as sensitive to strain than the loose tube cable construction. This technology holds promise for monitoring mechanical strain in response to periodic hydraulic testing. Such an approach could be used, for example, in leak detection of injection systems by inducing a periodically varying injection rate.
NASA Astrophysics Data System (ADS)
Ciervo, C.; Becker, M.; Cole, M. C.; Coleman, T.; Mondanos, M.
2017-12-01
Measuring fracture mechanical behavior in response to changes in fluid pressure is critical for understanding flow through petroleum reservoirs, predicting hydrothermal responses in geothermal fields, and monitoring geologic carbon sequestration injection. Distributed acoustic sensing (DAS) is new, but commercially available fiber optic technology that offers a novel approach to characterize fractured bedrock systems. DAS was originally designed to measure the amplitude, frequency, and phase of an acoustic wave, and is therefore capable of detecting strains at exceedingly small scales. Though normally used to measure frequencies in the Hz to kHz range, we adapted DAS to measure fracture displacements in response to periodic hydraulic pulses in the mHz frequency range. A field experiment was conducted in a fractured bedrock aquifer to test the ability of DAS to measure fracture mechanical response to oscillatory well tests. Fiber optic cable was deployed in a well, and coupled to the borehole wall using a flexible impermeable liner designed with an air coupled transducer to measure fluid pressure at the target fracture zone. Two types of cable were tested, a loose tube and tight buffered, to determine the effects of cable construction. Both strain and pressure were measured across the known fracture zone hydraulically connected to a well 30 m away. The companion well was subjected to alternating pumping and injection with periods between 2 and 18 minutes. Raw DAS data were collected as strain rate measured every 0.25 m along the fiber with a gauge length of 10 m, at a sampling rate of 1 kHz. Strain rate was converted to strain by integrating with respect to time. DAS measured periodic strains of less than 1 nm/m in response to periodic injection and pumping at the companion well. Strain was observed by DAS only at the depth of the hydraulically connected fracture zone. Thus, the magnitude and response of the strain could be both localized with depth and measured quantitatively. The tight buffered cable was found to be twice as sensitive to strain than the loose tube cable construction. This technology holds promise for monitoring mechanical strain in response to periodic hydraulic testing. Such an approach could be used, for example, in leak detection of injection systems by inducing a periodically varying injection rate.
Non-Invasive Tension Measurement Devices for Parachute Cordage
NASA Technical Reports Server (NTRS)
Litteken, Douglas A.; Daum, Jared S.
2016-01-01
The need for lightweight and non-intrusive tension measurements has arisen alongside the development of high-fidelity computer models of textile and fluid dynamics. In order to validate these computer models, data must be gathered in the operational environment without altering the design, construction, or performance of the test article. Current measurement device designs rely on severing a cord and breaking the load path to introduce a load cell. These load cells are very reliable, but introduce an area of high stiffness in the load path, directly affecting the structural response, adding excessive weight, and possibly altering the dynamics of the parachute during a test. To capture the required data for analysis validation without affecting the response of the system, non-invasive measurement devices have been developed and tested by NASA. These tension measurement devices offer minimal impact to the mass, form, fit, and function of the test article, while providing reliable, axial tension measurements for parachute cordage.
Method for automatic measurement of second language speaking proficiency
NASA Astrophysics Data System (ADS)
Bernstein, Jared; Balogh, Jennifer
2005-04-01
Spoken language proficiency is intuitively related to effective and efficient communication in spoken interactions. However, it is difficult to derive a reliable estimate of spoken language proficiency by situated elicitation and evaluation of a person's communicative behavior. This paper describes the task structure and scoring logic of a group of fully automatic spoken language proficiency tests (for English, Spanish and Dutch) that are delivered via telephone or Internet. Test items are presented in spoken form and require a spoken response. Each test is automatically-scored and primarily based on short, decontextualized tasks that elicit integrated listening and speaking performances. The tests present several types of tasks to candidates, including sentence repetition, question answering, sentence construction, and story retelling. The spoken responses are scored according to the lexical content of the response and a set of acoustic base measures on segments, words and phrases, which are scaled with IRT methods or parametrically combined to optimize fit to human listener judgments. Most responses are isolated spoken phrases and sentences that are scored according to their linguistic content, their latency, and their fluency and pronunciation. The item development procedures and item norming are described.
Systematic impact of institutional pressures on safety climate in the construction industry.
He, Qinghua; Dong, Shuang; Rose, Timothy; Li, Heng; Yin, Qin; Cao, Dongping
2016-08-01
This paper explores how three types of institutional pressure (i.e., coercive, mimetic and normative pressures) systematically impact on the safety climate of construction projects. These impacts are empirically tested by survey data collected from 186 questionnaires of construction companies operating in Shanghai, China. The results, obtained by partial least squares analysis, show that organizational management commitment to safety and employee involvement is positively related to all three institutional pressures, while the perception of responsibility for safety and health is significantly influenced by coercive and mimetic pressure. However, coercive and normative pressures have no significant effect on the applicability of safety rules and work practices, revealing the importance of external organizational pressures in improving project safety climate from a systematic view. The findings also provide insights into the use of institutional forces to facilitate the improvement of safety climate in the construction industry. Copyright © 2015 Elsevier Ltd. All rights reserved.
Shan, Ming; Chan, Albert P C; Le, Yun; Hu, Yi
2015-06-01
Response strategy is a key for preventing widespread corruption vulnerabilities in the public construction sector. Although several studies have been devoted to this area, the effectiveness of response strategies has seldom been evaluated in China. This study aims to fill this gap by investigating the effectiveness of response strategies for corruption vulnerabilities through a survey in the Chinese public construction sector. Survey data obtained from selected experts involved in the Chinese public construction sector were analyzed by factor analysis and partial least squares-structural equation modeling. Analysis results showed that four response strategies of leadership, rules and regulations, training, and sanctions, only achieved an acceptable level in preventing corruption vulnerabilities in the Chinese public construction sector. This study contributes to knowledge by improving the understanding of the effectiveness of response strategies for corruption vulnerabilities in the public construction sector of developing countries.
Wind-induced structural response of a large telescope
NASA Astrophysics Data System (ADS)
Smith, David R.; Avitabile, Peter; Gwaltney, Geoff; Cho, Myung; Sheehan, Michael
2004-09-01
In May of 2000, the construction progress of the Gemini South 8m telescope at Cerro Pachon in Chile was such that the telescope and dome were installed and able to move, but the primary mirror had not been installed. This provided a unique opportunity to make extensive tests of the structure in its nearly-completed state, including a modal impact test and simultaneous measurements of wind pressure and structural response. The testing was even more comprehensive because the Gemini dome design allows for a wide range of wind flow configurations, from nearly enclosed to almost fully exposed. In these tests, the operating response of 24 surface pressures on the primary mirror cell, 5 wind velocity channels (each with direction vector information), and more than 70 channels of accelerometers on the telescope structure were measured. The data were taken in a variety of wind loading configurations. While previous analysis efforts have focused on the wind velocity and pressure measurement, this paper investigates the dynamic behavior of the telescope structure itself. Specifically, the discussion includes the participation of the modes measured in the modal impact test as a function of wind loading configuration. Data that indicate the most important frequency ranges in the operating response of the telescope are also presented. Finally, the importance of the response of the enclosure on the structural vibration of the telescope structure is discussed.
ERIC Educational Resources Information Center
Ensminger, David C.; Hoyt, Amy E.; Chandrasekhar, Arcot J.; McNulty, John A.
2013-01-01
We tested the hypothesis that medical students change their study strategies when transitioning from basic science courses to clerkships, and that their study practices are associated with performance scores. Factor scores for three approaches to studying (construction, rote, and review) generated from student (n = 150) responses to a…
Longitudinal Construct Validity of Brief Symptom Inventory Subscales in Schizophrenia
ERIC Educational Resources Information Center
Long, Jeffrey D.; Harring, Jeffrey R.; Brekke, John S.; Test, Mary Ann; Greenberg, Jan
2007-01-01
Longitudinal validity of Brief Symptom Inventory subscales was examined in a sample (N = 318) with schizophrenia-related illness measured at baseline and every 6 months for 3 years. Nonlinear factor analysis of items was used to test graded response models (GRMs) for subscales in isolation. The models varied in their within-time and between-times…
IRT-LR-DIF with Estimation of the Focal-Group Density as an Empirical Histogram
ERIC Educational Resources Information Center
Woods, Carol M.
2008-01-01
Item response theory-likelihood ratio-differential item functioning (IRT-LR-DIF) is used to evaluate the degree to which items on a test or questionnaire have different measurement properties for one group of people versus another, irrespective of group-mean differences on the construct. Usually, the latent distribution is presumed normal for both…
A Critical Analysis of the Body of Work Method for Setting Cut-Scores
ERIC Educational Resources Information Center
Radwan, Nizam; Rogers, W. Todd
2006-01-01
The recent increase in the use of constructed-response items in educational assessment and the dissatisfaction with the nature of the decision that the judges must make using traditional standard-setting methods created a need to develop new and effective standard-setting procedures for tests that include both multiple-choice and…
Moral Identity as Moral Ideal Self: Links to Adolescent Outcomes
ERIC Educational Resources Information Center
Hardy, Sam A.; Walker, Lawrence J.; Olsen, Joseph A.; Woodbury, Ryan D.; Hickman, Jacob R.
2014-01-01
The purposes of this study were to conceptualize moral identity as moral ideal self, to develop a measure of this construct, to test for age and gender differences, to examine links between moral ideal self and adolescent outcomes, and to assess purpose and social responsibility as mediators of the relations between moral ideal self and outcomes.…
ERIC Educational Resources Information Center
Wright, Christian D.; Eddy, Sarah L.; Wenderoth, Mary Pat; Abshire, Elizabeth; Blankenbiller, Margaret; Brownell, Sara E.
2016-01-01
Recent reform efforts in undergraduate biology have recommended transforming course exams to test at more cognitively challenging levels, which may mean including more cognitively challenging and more constructed-response questions on assessments. However, changing the characteristics of exams could result in bias against historically underserved…
Item Estimates under Low-Stakes Conditions: How Should Omits Be Treated?
ERIC Educational Resources Information Center
DeMars, Christine
Using data from a pilot test of science and math from students in 30 high schools, item difficulties were estimated with a one-parameter model (partial-credit model for the multi-point items). Some items were multiple-choice items, and others were constructed-response items (open-ended). Four sets of estimates were obtained: estimates for males…
Fire resistivity and toxicity studies of candidate aircraft passenger seat materials
NASA Technical Reports Server (NTRS)
Fewell, L. L.; Trabold, E. L.; Spieth, H.
1978-01-01
Fire resistivity studies were conducted on a wide range of candidate nonmetallic materials being considered for the construction of improved fire resistant aircraft passenger seats. These materials were evaluated on the basis of FAA airworthiness burn and smoke generation tests, colorfastness, limiting oxygen index, and animal toxicity tests. Physical, mechanical, and aesthetic properties were also assessed. Candidate seat materials that have significantly improved thermal response to various thermal loads corresponding to reasonable fire threats as they relate to in-flight fire situations, are identified.
Ghio, Daniela; Thomson, Wendy; Calam, Rachel; Ulph, Fiona; Baildam, Eileen M; Hyrich, Kimme; Cordingley, Lis
2018-02-01
To investigate the suitability of the revised Illness Perception Questionnaire (IPQ-R) for use with adolescents with a long-term pain condition and to validate a new questionnaire for use with this age group. A three-phase mixed-methods study. Phase 1 comprised in-depth qualitative analyses of audio-recorded cognitive interviews with 20 adolescents with juvenile idiopathic arthritis who were answering IPQ-R items. Transcripts were coded using framework analysis. A content analysis of their intended responses to individual items was also conducted. In Phase 2, a new questionnaire was developed and its linguistic and face validity were assessed with 18 adolescents without long-term conditions. In Phase 3, the construct validity of the new questionnaire was assessed with 240 adolescents with juvenile idiopathic arthritis. A subset of 43 adolescents completed the questionnaire a second time to assess test-retest reliability. All participants were aged 11-16 years. Participants described both conceptual and response format difficulties when answering IPQ-R items. In response, the Pain Perception Questionnaire for Young People (PPQ-YP) was designed which incorporated significant modifications to both wording and response formats when compared with the IPQ-R. A principal component analysis of the PPQ-YP identified ten constructs in the new questionnaire. Emotional representations were separated into two constructs, responsive and anticipatory emotions. The PPQ-YP showed high test-retest reliability. Symptom beliefs appear to be more salient to adolescents with a long-term pain condition than beliefs about the illness as a whole. A new questionnaire to assess pain beliefs of adolescents was designed. Further validation work may be needed to assess its suitability for use with other pain conditions. Statement of contribution What is already known on this subject? Versions of the adult Revised Illness Perception Questionnaire (IPQ-R) have been adapted for adolescents and children by changing item wording; however, research to assess the degree to which the underlying IPQ-R constructs are relevant to adolescents with a long-term condition had not been performed. What the present study adds? In adolescents, beliefs about symptoms of their condition are more salient than beliefs about the illness as a whole. Question response formats for children and young people need to take account of age-specific abilities. A new questionnaire has been designed for adolescents with pain. It is theoretically congruent with the CS-SRM. © 2017 The Authors. British Journal of Health Psychology published by John Wiley & Sons Ltd on behalf of British Psychological Society.
Arimura, Tatsuyuki; Hosoi, Masako; Tsukiyama, Yoshihiro; Yoshida, Toshiyuki; Fujiwara, Daiki; Tanaka, Masanori; Tamura, Ryuichi; Nakashima, Yasunori; Sudo, Nobuyuki; Kubo, Chiharu
2012-04-01
The present study aimed to develop a Japanese version of the Short-Form McGill Pain Questionnaire (SF-MPQ-J) that focuses on cross-culturally equivalence to the original English version and to test its reliability and validity. Cross-sectional design. In study 1, SF-MPQ was translated and adapted into Japanese. It included construction of response scales equivalent to the original using a variation of the Thurstone method of equal-appearing intervals. A total of 147 undergraduate students and 44 pain patients participated in the development of the Japanese response scales. To measure the equivalence of pain descriptors, 62 pain patients in four diagnostic groups were asked to choose pain descriptors that described their pain. In study 2, chronic pain patients (N=126) completed the SF-MPQ-J, the Long-Form McGill Pain Questionnaire Japanese version (LF-MPQ-J), and the 11-point numerical rating scale of pain intensity. Correlation analysis examined the construct validity of the SF-MPQ-J. The results from study 1 were used to develop SF-MPQ-J, which is linguistically equivalent to the original questionnaire. Response scales from SF-MPQ-J represented the original scale values. All pain descriptors, except one, were used by >33% in at least one of the four diagnostic groups. Study 2 exhibited adequate internal consistency and test-retest reliability, with the construct validity of SF-MPQ-J comparable to the original. These findings suggested that SF-MPQ-J is reliable, valid, and cross-culturally equivalent to the original questionnaire. Researchers might consider using this scale in multicenter, multi-ethnical trials or cross-cultural studies that include Japanese-speaking patients. Wiley Periodicals, Inc.
Crins, Martine H. P.; Roorda, Leo D.; Smits, Niels; de Vet, Henrica C. W.; Westhovens, Rene; Cella, David; Cook, Karon F.; Revicki, Dennis; van Leeuwen, Jaap; Boers, Maarten; Dekker, Joost; Terwee, Caroline B.
2015-01-01
The Dutch-Flemish PROMIS Group translated the adult PROMIS Pain Interference item bank into Dutch-Flemish. The aims of the current study were to calibrate the parameters of these items using an item response theory (IRT) model, to evaluate the cross-cultural validity of the Dutch-Flemish translations compared to the original English items, and to evaluate their reliability and construct validity. The 40 items in the bank were completed by 1085 Dutch chronic pain patients. Before calibrating the items, IRT model assumptions were evaluated using confirmatory factor analysis (CFA). Items were calibrated using the graded response model (GRM), an IRT model appropriate for items with more than two response options. To evaluate cross-cultural validity, differential item functioning (DIF) for language (Dutch vs. English) was examined. Reliability was evaluated based on standard errors and Cronbach’s alpha. To evaluate construct validity correlations with scores on legacy instruments (e.g., the Disabilities of the Arm, Shoulder and Hand Questionnaire) were calculated. Unidimensionality of the Dutch-Flemish PROMIS Pain Interference item bank was supported by CFA tests of model fit (CFI = 0.986, TLI = 0.986). Furthermore, the data fit the GRM and showed good coverage across the pain interference continuum (threshold-parameters range: -3.04 to 3.44). The Dutch-Flemish PROMIS Pain Interference item bank has good cross-cultural validity (only two out of 40 items showing DIF), good reliability (Cronbach’s alpha = 0.98), and good construct validity (Pearson correlations between 0.62 and 0.75). A computer adaptive test (CAT) and Dutch-Flemish PROMIS short forms of the Dutch-Flemish PROMIS Pain Interference item bank can now be developed. PMID:26214178
Wright, Christian D; Eddy, Sarah L; Wenderoth, Mary Pat; Abshire, Elizabeth; Blankenbiller, Margaret; Brownell, Sara E
2016-01-01
Recent reform efforts in undergraduate biology have recommended transforming course exams to test at more cognitively challenging levels, which may mean including more cognitively challenging and more constructed-response questions on assessments. However, changing the characteristics of exams could result in bias against historically underserved groups. In this study, we examined whether and to what extent the characteristics of instructor-generated tests impact the exam performance of male and female and middle/high- and low-socioeconomic status (SES) students enrolled in introductory biology courses. We collected exam scores for 4810 students from 87 unique exams taken across 3 yr of the introductory biology series at a large research university. We determined the median Bloom's level and the percentage of constructed-response questions for each exam. Despite controlling for prior academic ability in our models, we found that males and middle/high-SES students were disproportionately favored as the Bloom's level of exams increased. Additionally, middle/high-SES students were favored as the proportion of constructed-response questions on exams increased. Given that we controlled for prior academic ability, our findings do not likely reflect differences in academic ability level. We discuss possible explanations for our findings and how they might impact how we assess our students. © 2016 C. D. Wright, S. L. Eddy, et al. CBE—Life Sciences Education © 2016 The American Society for Cell Biology. This article is distributed by The American Society for Cell Biology under license from the author(s). It is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).
Crins, Martine H P; Roorda, Leo D; Smits, Niels; de Vet, Henrica C W; Westhovens, Rene; Cella, David; Cook, Karon F; Revicki, Dennis; van Leeuwen, Jaap; Boers, Maarten; Dekker, Joost; Terwee, Caroline B
2015-01-01
The Dutch-Flemish PROMIS Group translated the adult PROMIS Pain Interference item bank into Dutch-Flemish. The aims of the current study were to calibrate the parameters of these items using an item response theory (IRT) model, to evaluate the cross-cultural validity of the Dutch-Flemish translations compared to the original English items, and to evaluate their reliability and construct validity. The 40 items in the bank were completed by 1085 Dutch chronic pain patients. Before calibrating the items, IRT model assumptions were evaluated using confirmatory factor analysis (CFA). Items were calibrated using the graded response model (GRM), an IRT model appropriate for items with more than two response options. To evaluate cross-cultural validity, differential item functioning (DIF) for language (Dutch vs. English) was examined. Reliability was evaluated based on standard errors and Cronbach's alpha. To evaluate construct validity correlations with scores on legacy instruments (e.g., the Disabilities of the Arm, Shoulder and Hand Questionnaire) were calculated. Unidimensionality of the Dutch-Flemish PROMIS Pain Interference item bank was supported by CFA tests of model fit (CFI = 0.986, TLI = 0.986). Furthermore, the data fit the GRM and showed good coverage across the pain interference continuum (threshold-parameters range: -3.04 to 3.44). The Dutch-Flemish PROMIS Pain Interference item bank has good cross-cultural validity (only two out of 40 items showing DIF), good reliability (Cronbach's alpha = 0.98), and good construct validity (Pearson correlations between 0.62 and 0.75). A computer adaptive test (CAT) and Dutch-Flemish PROMIS short forms of the Dutch-Flemish PROMIS Pain Interference item bank can now be developed.
Periodontal regeneration via chemo-attractive constructs.
Cai, Xinjie; Yang, Fang; Walboomers, X Frank; Wang, Yining; Jansen, John A; van den Beucken, Jeroen J J P; Plachokova, Adelina S
2018-05-19
Chemo-attractants, such as stromal cell-derived factor-1α (SDF-1α), can offer an advantage for periodontal regeneration by recruiting the patient's own stem cells to stimulate self-repair. We here developed a chemo-attractive construct for periodontal regeneration using SDF-1α and evaluated its efficacy in vivo. SDF-1α was loaded on gelatin sponge and tested in vitro for SDF-1α release. Subsequently, SDF-1α constructs were implanted into rat periodontal defects for 1 and 6 weeks, with unloaded materials and empty defects as controls. The regenerative efficacy was evaluated by micro-CT, histological and histomorphometrical analyses. In vitro results showed limited SDF-1α release up to 35 days. In contrast, SDF-1α constructs significantly improved periodontal defect regeneration in terms of alveolar bone height, new bone area, and functional ligament length. Additionally, SDF-1α constructs decreased the inflammatory response at week 6. Chemo-attractive constructs significantly improved periodontal regeneration in terms of alveolar bone height, new bone area, and functional ligament length. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.
A HO-IRT Based Diagnostic Assessment System with Constructed Response Items
ERIC Educational Resources Information Center
Yang, Chih-Wei; Kuo, Bor-Chen; Liao, Chen-Huei
2011-01-01
The aim of the present study was to develop an on-line assessment system with constructed response items in the context of elementary mathematics curriculum. The system recorded the problem solving process of constructed response items and transfered the process to response codes for further analyses. An inference mechanism based on artificial…
Tomita, Machiko R; Saharan, Sumandeep; Rajendran, Sheela; Nochajski, Susan M; Schweitzer, Jo A
2014-01-01
OBJECTIVE. To identify psychometric properties of the Home Safety Self-Assessment Tool (HSSAT) to prevent falls in community-dwelling older adults. METHOD. We tested content validity, test-retest reliability, interrater reliability, construct validity, convergent and discriminant validity, and responsiveness to change. RESULTS. The content validity index was .98, the intraclass correlation coefficient for test-retest reliability was .97, and the interrater reliability was .89. The difference on identified risk factors between the use and nonuse of the HSSAT was significant (p = .005). Convergent validity with the Centers for Disease Control and Prevention Home Safety Checklist was high (r = .65), and discriminant validity with fear of falling was very low (r = .10). The responsiveness to change was moderate (standardized response mean = 0.57). CONCLUSION. The HSSAT is a reliable and valid instrument to identify fall risks in a home environment, and the HSSAT booklet is effective as educational material leading to improvement in home safety. Copyright © 2014 by the American Occupational Therapy Association, Inc.
Steca, Patrizia; Monzani, Dario; Greco, Andrea; Chiesi, Francesca; Primi, Caterina
2015-06-01
This study is aimed at testing the measurement properties of the Life Orientation Test-Revised (LOT-R) for the assessment of dispositional optimism by employing item response theory (IRT) analyses. The LOT-R was administered to a large sample of 2,862 Italian adults. First, confirmatory factor analyses demonstrated the theoretical conceptualization of the construct measured by the LOT-R as a single bipolar dimension. Subsequently, IRT analyses for polytomous, ordered response category data were applied to investigate the items' properties. The equivalence of the items across gender and age was assessed by analyzing differential item functioning. Discrimination and severity parameters indicated that all items were able to distinguish people with different levels of optimism and adequately covered the spectrum of the latent trait. Additionally, the LOT-R appears to be gender invariant and, with minor exceptions, age invariant. Results provided evidence that the LOT-R is a reliable and valid measure of dispositional optimism. © The Author(s) 2014.
NASA Astrophysics Data System (ADS)
Rosado-Fuentes, A.; Arango-Galvan, C.; Arciniega-Ceballos, A.; Hernández-Quintero, J. E.; Mendo-Perez, G.
2017-12-01
A controlled shallow test site (CSTS) has been constructed at the UNAM Geomagnetic Observatory in Teoloyucan, central Mexico. The objective of the CSTS is to have a controlled place to test new developments and arrays that can be used for archaeological and engineering exploration, as well as to calibrate instruments, train students and for future research. The CSTS was built far enough not to influence the geomagnetic sensors and not be affected by noise sources. Special attention was given to the distribution and geometry of buried materials as well as the instruments used. Before the CSTS was built, a combination of near-surface, non-invasive geophysical techniques was performed to characterize the area of 20 by 32 meters. The methods include magnetometry, electromagnetic induction, ground penetrating radar (GPR), electrical resistivity tomography (ERT) and seismic refraction tomography (SRT). The GPR, SRT and ERT results show relatively flat interfaces. In general, the vertical gradient of the total magnetic field and the electric conductivity have very small variations, showing only one strong magnetic dipole associated to a shallow anomaly. These results indicate that the area is ideal for the construction of the test site. The CSTS consists on buried structures made with different materials and geometries (cubes, cylinders and tubes) commonly used as construction materials in Mexico since Pre-Hispanic times. These materials include concrete, reinforced concrete, wood, brick, adobe, basalt, tezontle and also empty space for controlling responses. The CSTS is versatile enough to be reshaped considering new geometries or materials and to conduct further investigations.
Creasy, John M; Midya, Abhishek; Chakraborty, Jayasree; Adams, Lauryn B; Gomes, Camilla; Gonen, Mithat; Seastedt, Kenneth P; Sutton, Elizabeth J; Cercek, Andrea; Kemeny, Nancy E; Shia, Jinru; Balachandran, Vinod P; Kingham, T Peter; Allen, Peter J; DeMatteo, Ronald P; Jarnagin, William R; D'Angelica, Michael I; Do, Richard K G; Simpson, Amber L
2018-06-19
This study investigates whether quantitative image analysis of pretreatment CT scans can predict volumetric response to chemotherapy for patients with colorectal liver metastases (CRLM). Patients treated with chemotherapy for CRLM (hepatic artery infusion (HAI) combined with systemic or systemic alone) were included in the study. Patients were imaged at baseline and approximately 8 weeks after treatment. Response was measured as the percentage change in tumour volume from baseline. Quantitative imaging features were derived from the index hepatic tumour on pretreatment CT, and features statistically significant on univariate analysis were included in a linear regression model to predict volumetric response. The regression model was constructed from 70% of data, while 30% were reserved for testing. Test data were input into the trained model. Model performance was evaluated with mean absolute prediction error (MAPE) and R 2 . Clinicopatholologic factors were assessed for correlation with response. 157 patients were included, split into training (n = 110) and validation (n = 47) sets. MAPE from the multivariate linear regression model was 16.5% (R 2 = 0.774) and 21.5% in the training and validation sets, respectively. Stratified by HAI utilisation, MAPE in the validation set was 19.6% for HAI and 25.1% for systemic chemotherapy alone. Clinical factors associated with differences in median tumour response were treatment strategy, systemic chemotherapy regimen, age and KRAS mutation status (p < 0.05). Quantitative imaging features extracted from pretreatment CT are promising predictors of volumetric response to chemotherapy in patients with CRLM. Pretreatment predictors of response have the potential to better select patients for specific therapies. • Colorectal liver metastases (CRLM) are downsized with chemotherapy but predicting the patients that will respond to chemotherapy is currently not possible. • Heterogeneity and enhancement patterns of CRLM can be measured with quantitative imaging. • Prediction model constructed that predicts volumetric response with 20% error suggesting that quantitative imaging holds promise to better select patients for specific treatments.
Altered Expression of SPINDLY Affects Gibberellin Response and Plant Development1
Swain, Stephen M.; Tseng, Tong-seung; Olszewski, Neil E.
2001-01-01
Gibberellins (GAs) are plant hormones with diverse roles in plant growth and development. SPINDLY (SPY) is one of several genes identified in Arabidopsis that are involved in GA response and it is thought to encode an O-GlcNAc transferase. Genetic analysis suggests that SPY negatively regulates GA response. To test the hypothesis that SPY acts specifically as a negatively acting component of GA signal transduction, spy mutants and plants containing a 35S:SPY construct have been examined. A detailed investigation of the spy mutant phenotype suggests that SPY may play a role in plant development beyond its role in GA signaling. Consistent with this suggestion, the analysis of spy er plants suggests that the ERECTA (ER) gene, which has not been implicated as having a role in GA signaling, appears to enhance the non-GA spy mutant phenotypes. Arabidopsis plants containing a 35S:SPY construct possess reduced GA response at seed germination, but also possess phenotypes consistent with increased GA response, although not identical to spy mutants, during later vegetative and reproductive development. Based on these results, the hypothesis that SPY is specific for GA signaling is rejected. Instead, it is proposed that SPY is a negative regulator of GA response that has additional roles in plant development. PMID:11457967
DiFilippo, Kristen Nicole; Huang, Wenhao; Chapman-Novakofski, Karen M
2017-10-27
The extensive availability and increasing use of mobile apps for nutrition-based health interventions makes evaluation of the quality of these apps crucial for integration of apps into nutritional counseling. The goal of this research was the development, validation, and reliability testing of the app quality evaluation (AQEL) tool, an instrument for evaluating apps' educational quality and technical functionality. Items for evaluating app quality were adapted from website evaluations, with additional items added to evaluate the specific characteristics of apps, resulting in 79 initial items. Expert panels of nutrition and technology professionals and app users reviewed items for face and content validation. After recommended revisions, nutrition experts completed a second AQEL review to ensure clarity. On the basis of 150 sets of responses using the revised AQEL, principal component analysis was completed, reducing AQEL into 5 factors that underwent reliability testing, including internal consistency, split-half reliability, test-retest reliability, and interrater reliability (IRR). Two additional modifiable constructs for evaluating apps based on the age and needs of the target audience as selected by the evaluator were also tested for construct reliability. IRR testing using intraclass correlations (ICC) with all 7 constructs was conducted, with 15 dietitians evaluating one app. Development and validation resulted in the 51-item AQEL. These were reduced to 25 items in 5 factors after principal component analysis, plus 9 modifiable items in two constructs that were not included in principal component analysis. Internal consistency and split-half reliability of the following constructs derived from principal components analysis was good (Cronbach alpha >.80, Spearman-Brown coefficient >.80): behavior change potential, support of knowledge acquisition, app function, and skill development. App purpose split half-reliability was .65. Test-retest reliability showed no significant change over time (P>.05) for all but skill development (P=.001). Construct reliability was good for items assessing age appropriateness of apps for children, teens, and a general audience. In addition, construct reliability was acceptable for assessing app appropriateness for various target audiences (Cronbach alpha >.70). For the 5 main factors, ICC (1,k) was >.80, with a P value of <.05. When 15 nutrition professionals evaluated one app, ICC (2,15) was .98, with a P value of <.001 for all 7 constructs when the modifiable items were specified for adults seeking weight loss support. Our preliminary effort shows that AQEL is a valid, reliable instrument for evaluating nutrition apps' qualities for clinical interventions by nutrition clinicians, educators, and researchers. Further efforts in validating AQEL in various contexts are needed. ©Kristen Nicole DiFilippo, Wenhao Huang, Karen M. Chapman-Novakofski. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 27.10.2017.
Verbal ability, social stress, and anxiety in children with autistic disorder.
Lanni, Kimberly E; Schupp, Clayton W; Simon, David; Corbett, Blythe A
2012-03-01
The aims of this study were to evaluate the physiological stress and anxiety responses in children with autism following completion of a standardized, social-evaluative stressor (Trier Social Stress Test-Child version), document the relationship between verbal ability, stress, and anxiety, and determine the association between stress and anxiety in children with autism and typical development. Results demonstrated the Trier Social Stress Test-Child version to be a benign stressor for children with autism. Lower verbal ability in children with autism did not predict salivary cortisol or anxiety responses. There was a lack of association between stress and anxiety for both groups, highlighting the importance of considering these terms as separate constructs. Clinical implications and the limited utility of the Trier Social Stress Test-Child version in evaluating psychosocial stress in autism are discussed.
van der Lee, J H; Beckerman, H; Knol, D L; de Vet, H C W; Bouter, L M
2004-06-01
The Motor Activity Log (MAL) is a semistructured interview for hemiparetic stroke patients to assess the use of their paretic arm and hand (amount of use [AOU]) and quality of movement [QOM]) during activities of daily living. Scores range from 0 to 5. The following clinimetric properties of the MAL were quantified: internal consistency (Cronbach alpha), test-retest agreement (Bland and Altman method), cross-sectional construct validity (correlation between AOU and QOM and with the Action Research Arm [ARA] test), longitudinal construct validity (correlation of change on the MAL during the intervention with a global change rating [GCR] and with change on the ARA), and responsiveness (effect size). Two baseline measurements 2 weeks apart and 1 follow-up measurement immediately after 2 weeks of intensive exercise therapy either with or without immobilization of the unimpaired arm (forced use) were performed in 56 chronic stroke patients. Internal consistency was high (AOU: alpha=0.88; QOM: alpha=0.91). The limits of agreement were -0.70 to 0.85 and -0.61 to 0.71 for AOU and QOM, respectively. The correlation with the ARA score (Spearman rho) was 0.63 (AOU and QOM). However, the improvement on the MAL during the intervention was only weakly related to the GCR and to the improvement on the ARA, Spearman rho was between 0.16 and 0.22. The responsiveness ratio was 1.9 (AOU) and 2.0 (QOM). The MAL is internally consistent and relatively stable in chronic stroke patients not undergoing an intervention. The cross-sectional construct validity of the MAL is reasonable, but the results raise doubt about its longitudinal construct validity.
Applying Item Response Theory methods to design a learning progression-based science assessment
NASA Astrophysics Data System (ADS)
Chen, Jing
Learning progressions are used to describe how students' understanding of a topic progresses over time and to classify the progress of students into steps or levels. This study applies Item Response Theory (IRT) based methods to investigate how to design learning progression-based science assessments. The research questions of this study are: (1) how to use items in different formats to classify students into levels on the learning progression, (2) how to design a test to give good information about students' progress through the learning progression of a particular construct and (3) what characteristics of test items support their use for assessing students' levels. Data used for this study were collected from 1500 elementary and secondary school students during 2009--2010. The written assessment was developed in several formats such as the Constructed Response (CR) items, Ordered Multiple Choice (OMC) and Multiple True or False (MTF) items. The followings are the main findings from this study. The OMC, MTF and CR items might measure different components of the construct. A single construct explained most of the variance in students' performances. However, additional dimensions in terms of item format can explain certain amount of the variance in student performance. So additional dimensions need to be considered when we want to capture the differences in students' performances on different types of items targeting the understanding of the same underlying progression. Items in each item format need to be improved in certain ways to classify students more accurately into the learning progression levels. This study establishes some general steps that can be followed to design other learning progression-based tests as well. For example, first, the boundaries between levels on the IRT scale can be defined by using the means of the item thresholds across a set of good items. Second, items in multiple formats can be selected to achieve the information criterion at all the defined boundaries. This ensures the accuracy of the classification. Third, when item threshold parameters vary a bit, the scoring rubrics and the items need to be reviewed to make the threshold parameters similar across items. This is because one important design criterion of the learning progression-based items is that ideally, a student should be at the same level across items, which means that the item threshold parameters (d1, d 2 and d3) should be similar across items. To design a learning progression-based science assessment, we need to understand whether the assessment measures a single construct or several constructs and how items are associated with the constructs being measured. Results from dimension analyses indicate that items of different carbon transforming processes measure different aspects of the carbon cycle construct. However, items of different practices assess the same construct. In general, there are high correlations among different processes or practices. It is not clear whether the strong correlations are due to the inherent links among these process/practice dimensions or due to the fact that the student sample does not show much variation in these process/practice dimensions. Future data are needed to examine the dimensionalities in terms of process/practice in detail. Finally, based on item characteristics analysis, recommendations are made to write more discriminative CR items and better OMC, MTF options. Item writers can follow these recommendations to write better learning progression-based items.
Preliminary study of the reliability of imaging charge coupled devices
NASA Technical Reports Server (NTRS)
Beall, J. R.; Borenstein, M. D.; Homan, R. A.; Johnson, D. L.; Wilson, D. D.; Young, V. F.
1978-01-01
Imaging CCDs are capable of low light level response and high signal-to-noise ratios. In space applications they offer the user the ability to achieve extremely high resolution imaging with minimum circuitry in the photo sensor array. This work relates the CCD121H Fairchild device to the fundamentals of CCDs and the representative technologies. Several failure modes are described, construction is analyzed and test results are reported. In addition, the relationship of the device reliability to packaging principles is analyzed and test data presented. Finally, a test program is defined for more general reliability evaluation of CCDs.
Collins, N J; Prinsen, C A C; Christensen, R; Bartels, E M; Terwee, C B; Roos, E M
2016-08-01
To conduct a systematic review and meta-analysis to synthesize evidence regarding measurement properties of the Knee injury and Osteoarthritis Outcome Score (KOOS). A comprehensive literature search identified 37 eligible papers evaluating KOOS measurement properties in participants with knee injuries and/or osteoarthritis (OA). Methodological quality was evaluated using the COSMIN checklist. Where possible, meta-analysis of extracted data was conducted for all studies and stratified by age and knee condition; otherwise narrative synthesis was performed. KOOS has adequate internal consistency, test-retest reliability and construct validity in young and old adults with knee injuries and/or OA. The ADL subscale has better content validity for older patients and Sport/Rec for younger patients with knee injuries, while the Pain subscale is more relevant for painful knee conditions. The five-factor structure of the original KOOS is unclear. There is some evidence that the KOOS subscales demonstrate sufficient unidimensionality, but this requires confirmation. Although measurement error requires further evaluation, the minimal detectable change for KOOS subscales ranges from 14.3 to 19.6 for younger individuals, and ≥20 for older individuals. Evidence of responsiveness comes from larger effect sizes following surgical (especially total knee replacement) than non-surgical interventions. KOOS demonstrates adequate content validity, internal consistency, test-retest reliability, construct validity and responsiveness for age- and condition-relevant subscales. Structural validity, cross-cultural validity and measurement error require further evaluation, as well as construct validity of KOOS Physical function Short form. Suggested order of subscales for different knee conditions can be applied in hierarchical testing of endpoints in clinical trials. PROSPERO (CRD42011001603). Copyright © 2016 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.
Simulating the Impact Response of Full-Scale Composite Airframe Structures
NASA Technical Reports Server (NTRS)
Fasanella, Edwin L.; Jackson, Karen E.; Littell, Justin D.; Seal, Michael D.
2012-01-01
NASA Langley Research Center obtained a composite helicopter cabin structure in 2010 from the US Army's Survivable Affordable Repairable Airframe Program (SARAP) that was fabricated by Sikorsky Aircraft Corporation. The cabin had been subjected to a vertical drop test in 2008 to evaluate a tilting roof concept to limit the intrusion of overhead masses into the fuselage cabin. Damage to the cabin test article was limited primarily to the roof. Consequently, the roof area was removed and the remaining structure was cut into test specimens including a large subfloor section and a forward framed fuselage section. In 2011, NASA and Sikorsky entered into a cooperative research agreement to study the impact responses of composite airframe structures and to evaluate the capabilities of the explicit transient dynamic finite element code, LS-DYNA®, to simulate these responses including damage initiation and progressive failure. Most of the test articles were manufactured of graphite unidirectional tape composite with a thermoplastic resin system. However, the framed fuselage section was constructed primarily of a plain weave graphite fabric material with a thermoset resin system. Test data were collected from accelerometers and full-field photogrammetry. The focus of this paper will be to document impact testing and simulation results for the longitudinal impact of the subfloor section and the vertical drop test of the forward framed fuselage section.
The kinetics of lactate production and removal during whole-body exercise
2012-01-01
Background Based on a literature review, the current study aimed to construct mathematical models of lactate production and removal in both muscles and blood during steady state and at varying intensities during whole-body exercise. In order to experimentally test the models in dynamic situations, a cross-country skier performed laboratory tests while treadmill roller skiing, from where work rate, aerobic power and blood lactate concentration were measured. A two-compartment simulation model for blood lactate production and removal was constructed. Results The simulated and experimental data differed less than 0.5 mmol/L both during steady state and varying sub-maximal intensities. However, the simulation model for lactate removal after high exercise intensities seems to require further examination. Conclusions Overall, the simulation models of lactate production and removal provide useful insight into the parameters that affect blood lactate response, and specifically how blood lactate concentration during practical training and testing in dynamical situations should be interpreted. PMID:22413898
Race, Amos; Miller, Mark A; Mann, Kenneth A
2008-10-20
Pre-clinical screening of cemented implant systems could be improved by modeling the longer-term response of the implant/cement/bone construct to cyclic loading. We formulated bone cement with degraded fatigue fracture properties (Sub-cement) such that long-term fatigue could be simulated in short-term cadaver tests. Sub-cement was made by adding a chain-transfer agent to standard polymethylmethacrylate (PMMA) cement. This reduced the molecular weight of the inter-bead matrix without changing reaction-rate or handling characteristics. Static mechanical properties were approximately equivalent to normal cement. Over a physiologically reasonable range of stress-intensity factor, fatigue crack propagation rates for Sub-cement were higher by a factor of 25+/-19. When tested in a simplified 2 1/2-D physical model of a stem-cement-bone system, crack growth from the stem was accelerated by a factor of 100. Sub-cement accelerated both crack initiation and growth rate. Sub-cement is now being evaluated in full stem/cement/femur models.
dos Anjos, Daniela Brianne Martins; Rodrigues, Roberta Cunha Matheus; Padilha, Kátia Melissa; Pedrosa, Rafaela Batista dos Santos; Gallani, Maria Cecília Bueno Jayme
2016-01-01
ABSTRACT Objective: evaluate the practicality, acceptability and the floor and ceiling effects, estimate the reliability and verify the convergent construct's validity with the instrument called the Heart Valve Disease Impact on daily life (IDCV) of the valve disease in patients with mitral and or aortic heart valve disease. Method: data was obtained from 86 heart valve disease patients through 3 phases: a face to face interview for a socio-demographic and clinic characterization and then other two done through phone calls of the interviewed patients for application of the instrument (test and repeat test). Results: as for the practicality and acceptability, the instrument was applied with an average time of 9,9 minutes and with 110% of responses, respectively. Ceiling and floor effects observed for all domains, especially floor effect. Reliability was tested using the test - repeating pattern to give evidence of temporal stability of the measurement. Significant negative correlations with moderate to strong magnitude were found between the score of the generic question about the impact of the disease and the scores of IDCV, which points to the validity of the instrument convergent construct. Conclusion: the instrument to measure the impact of valve heart disease on the patient's daily life showed evidence of reliability and validity when applied to patients with heart valve disease. PMID:27992024
Unnanuntana, Aasis; Ruangsomboon, Pakpoom; Keesukpunt, Worawut
2018-06-01
The 2-minute walk test (2mwt) is a performance-based test that evaluates functional recovery after total knee arthroplasty (TKA). This study evaluated its validity compared with the modified Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), Oxford Knee Score (OKS), modified Knee Score, Numerical Pain Rating Scale, and Timed Up and Go test, and its responsiveness in assessing functional recovery in TKA patients. This prospective cohort study included 162 patients undergoing primary TKA between 2013 and 2015. We used patient-reported outcome measures (modified WOMAC, OKS, modified Knee Score, Numerical Pain Rating Scale) and performance-based tests (2mwt and Timed Up and Go test) at baseline and 3, 6, and 12 months postoperatively. The construct validity of 2mwt was determined between the 2mwt distances walked and other outcome measurements. To assess responsiveness, effect size and standardized response mean were analyzed. Minimal clinically important difference of 2mwt at 12 months after TKA was also calculated. All outcome measurements improved significantly from baseline to 3, 6, and 12 months postoperatively. Bivariate analysis revealed mild to moderate associations between the 2mwt and modified WOMAC function subscales, and moderate to strong associations with OKS. Mild to moderate correlations were found for pain and stiffness between 2mwt and other outcome measurements. The effect size and standardized response mean at 12 months were large, with a minimal clinically important difference of 12.7 m. 2mwt is a validated performance-based test with responsiveness properties. Being simple and easy to perform, it can be used routinely in clinical practice to evaluate functional recovery after TKA. Copyright © 2018 The Authors. Published by Elsevier Inc. All rights reserved.
Cappelleri, Joseph C.; Lundy, J. Jason; Hays, Ron D.
2014-01-01
Introduction The U.S. Food and Drug Administration’s patient-reported outcome (PRO) guidance document defines content validity as “the extent to which the instrument measures the concept of interest” (FDA, 2009, p. 12). “Construct validity is now generally viewed as a unifying form of validity for psychological measurements, subsuming both content and criterion validity” (Strauss & Smith, 2009, p. 7). Hence both qualitative and quantitative information are essential in evaluating the validity of measures. Methods We review classical test theory and item response theory approaches to evaluating PRO measures including frequency of responses to each category of the items in a multi-item scale, the distribution of scale scores, floor and ceiling effects, the relationship between item response options and the total score, and the extent to which hypothesized “difficulty” (severity) order of items is represented by observed responses. Conclusion Classical test theory and item response theory can be useful in providing a quantitative assessment of items and scales during the content validity phase of patient-reported outcome measures. Depending on the particular type of measure and the specific circumstances, either one or both approaches should be considered to help maximize the content validity of PRO measures. PMID:24811753
The Fear of Positive Evaluation Scale: assessing a proposed cognitive component of social anxiety.
Weeks, Justin W; Heimberg, Richard G; Rodebaugh, Thomas L
2008-01-01
Cognitive-behavioral models propose that fear of negative evaluation is the core feature of social anxiety disorder. However, it may be that fear of evaluation in general is important in social anxiety, including fears of positive as well as negative evaluation. To test this hypothesis, we developed the Fear of Positive Evaluation Scale (FPES) and conducted analyses to examine the psychometric properties of the FPES, as well as test hypotheses regarding the construct of fear of positive evaluation (FPE). Responses from a large (n = 1711) undergraduate sample were utilized. The reliability, construct validity, and factorial validity of the FPES were examined; the distinction of FPE from fear of negative evaluation was evaluated utilizing confirmatory factor analysis; and the ability of FPE to predict social interaction anxiety above and beyond fear of negative evaluation was assessed. Results provide preliminary support for the psychometric properties of the FPES and the validity of the construct of FPE. The implications of FPE with respect to the study and treatment of social anxiety disorder are discussed.
Ecke, Holger; Aberg, Annika
2006-06-01
The re-use of bottom ash in road construction necessitates a tool to predict the impact of trace metals on the surroundings over the lifetime of the road. The aim of this work was to quantify the effect of environmental factors that are supposed to influence leaching, so as to suggest guidelines in developing a leaching procedure for the testing of incineration residues re-used in road constructions. The effects of pH, L/S (liquid-to-solid ratio), leaching time, and leaching atmosphere on the leachate concentrations of Cd, Cr, Cu, Ni, Pb, and Zn were studied using a two-level full factorial design. The most significant factor for all responses was the pH, followed by L/S, though the importance of pH and L/S is often ignored in leaching tests. Multiple linear regression models describing the variation in leaching data had R(2) values ranging from 61-97%. A two-step pH-stat leaching procedure that considers pH as well as L/S and leaching time was suggested.
Goeke-Morey, Marcie C; Cummings, E Mark; Harold, Gordon T; Shelton, Katherine H
2003-09-01
Categories and continua of parents' marital conflict tactics based on multiple, conceptually grounded criteria were tested. Participants were 175 U.S. children, ages 8-16 years (88 boys, 87 girls) and 327 Welsh children, ages 11-12 years (159 boys, 168 girls). Children's responses (affective, cognitive, behavioral) to analog presentations of 10 everyday marital conflict tactics enacted by fathers or mothers showed substantial variation as a function of tactic used. Orderings of conflict tactics on the various response criteria varied as a function of moderators, particularly the gender of the parent expressing the conflict tactic. Conflict tactics were classified as either constructive or destructive according to criteria derived from the emotional security hypothesis. Except for calm discussion, classifications did not change regardless of cultural group, parent gender, or child age or gender. Recommendations for negotiating everyday marital conflict for the children's sake are discussed.
The Rorschach texture response: a construct validation study using attachment theory.
Cassella, Michael J; Viglione, Donald J
2009-11-01
Using attachment theory, in this research, we explored the construct validity of the Rorschach (Exner, 1974) Texture (T) response as a measure of interpersonal closeness and contact. A total of 40 men and 39 women completed the Rorschach and 2 attachment inventories. Their romantic partners also completed an informant version of the attachment measures. Attachment styles were measured by factor scores involving both self-report and partner report. Results indicate that attachment theory, as a broad conceptual framework, is associated with T. Specifically, T = 1 is most closely associated with a secure attachment style, T > 1 with aspects of the preoccupied style, and T = 0 with aspects of the avoidant style and an absence of secure attachment. Needs for closeness and contact associated with T can be couched within an adult attachment theory, but in this study, we did not test for problematic aspects of insecure attachment. Gender is a complicating factor and deserves more study.
Design and construction of high-frequency magnetic probe system on the HL-2A tokamak
NASA Astrophysics Data System (ADS)
Liang, S. Y.; Ji, X. Q.; Sun, T. F.; Xu, Yuan; Lu, J.; Yuan, B. S.; Ren, L. L.; Yang, Q. W.
2017-12-01
A high-frequency magnetic probe system is designed, calibrated and constructed on the HL-2A tokamak. To investigate the factors which affect the probe frequency response, the inductance and capacitance in the probe system are analyzed using an equivalent circuit. Suitable sizes and turn number of the coil, and the length of transmission cable are optimized based on the theory and detailed test in the calibration. To deal with the frequency response limitation and bake-out, the ceramic grooved technique is used and the probe is wound with a bare copper wire. A cascade filter is manufactured with a suitable bandwidth as well as a good phase consistency between channels. The system has been used in the experiment to measure high frequency (≤300 kHz) magnetohydrodynamic fluctuations, which can meet the requirement of physical analysis on HL-2A.
Cross-cultural construct validity study of professionalism of Vietnamese medical students.
Nhan, Vo Thanh; Violato, Claudio; Le An, Pham; Beran, Tanya N
2014-01-01
Although many studies have made efforts to define and assess medical professionalism, few have addressed issues of construct validity. The purpose of this article is to explore further construct validity of medical professionalism employing exploratory and confirmatory factor analysis. The 32-item instrument by the American Board of Internal Medicine (ABIM) was adapted to assess the perceptions on medical professionalism of Vietnamese medical students. A sample of 1,196 (487 first-year, 341 third-year, 368 sixth-year) medical students participated voluntarily in the completion of the instrument. The data were randomly divided into three samples to assess the construct validity of medical professionalism by empirically deriving and confirming a model of professionalism. Exploratory and confirmatory factor analytic techniques resulted in a six-factor well-fitting model with a comparative fit index of .963 and root mean square error approximation of .029, 90% confidence interval [016, .039]: integrity, social responsibility, professional practice habits, ensuring quality care, altruism, and self-awareness. Social responsibility was perceived least important, and self-awareness was perceived most important by Vietnamese medical students. These constructs of medical professionalism were relatively similar with those found in Taiwanese medical students and the ABIM definitions but with some Vietnamese cultural differences. Although the results confirm that medical professionalism is a somewhat culturally sensitive construct, it nonetheless has many elements of medical professionalism that are universal. Future research should be conducted to test the generalizability of our six-factor model of professionalism with various samples (e.g., residents, physicians), cultures, and language groups.
NASA Technical Reports Server (NTRS)
Pendleton, Geoffrey N.; Paciesas, William S.; Mallozzi, Robert S.; Koshut, Tom M.; Fishman, Gerald J.; Meegan, Charles A.; Wilson, Robert B.; Horack, John M.; Lestrade, John Patrick
1995-01-01
The detector response matrices for the Burst And Transient Source Experiment (BATSE) on board the Compton Gamma Ray Observatory (CGRO) are described, including their creation and operation in data analysis. These response matrices are a detailed abstract representation of the gamma-ray detectors' operating characteristics that are needed for data analysis. They are constructed from an extensive set of calibration data coupled with a complex geometry electromagnetic cascade Monte Carlo simulation code. The calibration tests and simulation algorithm optimization are described. The characteristics of the BATSE detectors in the spacecraft environment are also described.
Systematic Development and Validation of a Theory-Based Questionnaire to Assess Toddler Feeding12
Hurley, Kristen M.; Pepper, M. Reese; Candelaria, Margo; Wang, Yan; Caulfield, Laura E.; Latta, Laura; Hager, Erin R.; Black, Maureen M.
2013-01-01
This paper describes the development and validation of a 27-item caregiver-reported questionnaire on toddler feeding. The development of the Toddler Feeding Behavior Questionnaire was based on a theory of interactive feeding that incorporates caregivers’ responses to concerns about their children’s dietary intake, appetite, size, and behaviors rather than relying exclusively on caregiver actions. Content validity included review by an expert panel (n = 7) and testing in a pilot sample (n = 105) of low-income mothers of toddlers. Construct validity and reliability were assessed among a second sample of low-income mothers of predominately African-American (70%) toddlers aged 12–32 mo (n = 297) participating in the baseline evaluation of a toddler overweight prevention study. Internal consistency (Cronbach’s α: 0.64–0.87) and test-retest (0.57–0.88) reliability were acceptable for most constructs. Exploratory and confirmatory factor analyses revealed 5 theoretically derived constructs of feeding: responsive, forceful/pressuring, restrictive, indulgent, and uninvolved (root mean square error of approximation = 0.047, comparative fit index = 0.90, standardized root mean square residual = 0.06). Statistically significant (P < 0.05) convergent validity results further validated the scale, confirming established relations between feeding behaviors, toddler overweight status, perceived toddler fussiness, and maternal mental health. The Toddler Feeding Behavior Questionnaire adds to the field by providing a brief instrument that can be administered in 5 min to examine how caregiver-reported feeding behaviors relate to toddler health and behavior. PMID:24068792
Questionnaire to assess patient satisfaction with pharmaceutical care in Spanish language.
Traverso, María Luz; Salamano, Mercedes; Botta, Carina; Colautti, Marisel; Palchik, Valeria; Pérez, Beatriz
2007-08-01
To develop and validate a questionnaire, in Spanish, for assessing patient satisfaction with pharmaceutical care received in community pharmacies. Selection and translation of questionnaire's items; definition of response scale and demographic questions. Evaluation of face and content validity, feasibility, factor structure, reliability and construct validity. Forty-one community pharmacies of the province of Santa Fe. Argentina. Questionnaire administered to patients receiving pharmaceutical care or traditional pharmacy services. Pilot test to assess feasibility. Factor analysis used principal components and varimax rotation. Reliability established using internal consistency with Cronbach's alpha. Construct validity determined with extreme group method. A self-administered questionnaire with 27 items, 5-point Likert response scale and demographic questions was designed considering multidimensional structure of patient satisfaction. Questionnaire evaluates cumulative experience of patients with comprehensive pharmaceutical care practice in community pharmacies. Two hundred and seventy-four complete questionnaires were obtained. Factor analysis resulted in three factors: Managing therapy, Interpersonal relationship and General satisfaction, with a cumulative variance of 62.51%. Cronbach's alpha for the whole questionnaire was 0.96, and 0.95, 0.88 and 0.76 for the three factors, respectively. Mann-Whitney test for construct validity did not showed significant differences between pharmacies that provide pharmaceutical care and those that do not, however, 23 items showed significant differences between the two groups of pharmacies. The questionnaire developed can be a reliable and valid instrument to assess patient satisfaction with pharmaceutical care in community pharmacies in Spanish. Further research is needed to deepen the validation process.
Systematic development and validation of a theory-based questionnaire to assess toddler feeding.
Hurley, Kristen M; Pepper, M Reese; Candelaria, Margo; Wang, Yan; Caulfield, Laura E; Latta, Laura; Hager, Erin R; Black, Maureen M
2013-12-01
This paper describes the development and validation of a 27-item caregiver-reported questionnaire on toddler feeding. The development of the Toddler Feeding Behavior Questionnaire was based on a theory of interactive feeding that incorporates caregivers' responses to concerns about their children's dietary intake, appetite, size, and behaviors rather than relying exclusively on caregiver actions. Content validity included review by an expert panel (n = 7) and testing in a pilot sample (n = 105) of low-income mothers of toddlers. Construct validity and reliability were assessed among a second sample of low-income mothers of predominately African-American (70%) toddlers aged 12-32 mo (n = 297) participating in the baseline evaluation of a toddler overweight prevention study. Internal consistency (Cronbach's α: 0.64-0.87) and test-retest (0.57-0.88) reliability were acceptable for most constructs. Exploratory and confirmatory factor analyses revealed 5 theoretically derived constructs of feeding: responsive, forceful/pressuring, restrictive, indulgent, and uninvolved (root mean square error of approximation = 0.047, comparative fit index = 0.90, standardized root mean square residual = 0.06). Statistically significant (P < 0.05) convergent validity results further validated the scale, confirming established relations between feeding behaviors, toddler overweight status, perceived toddler fussiness, and maternal mental health. The Toddler Feeding Behavior Questionnaire adds to the field by providing a brief instrument that can be administered in 5 min to examine how caregiver-reported feeding behaviors relate to toddler health and behavior.
A short response time atomic source for trapped ion experiments
NASA Astrophysics Data System (ADS)
Ballance, T. G.; Goodwin, J. F.; Nichol, B.; Stephenson, L. J.; Ballance, C. J.; Lucas, D. M.
2018-05-01
Ion traps are often loaded from atomic beams produced by resistively heated ovens. We demonstrate an atomic oven which has been designed for fast control of the atomic flux density and reproducible construction. We study the limiting time constants of the system and, in tests with 40Ca, show that we can reach the desired level of flux in 12 s, with no overshoot. Our results indicate that it may be possible to achieve an even faster response by applying an appropriate one-off heat treatment to the oven before it is used.
Air-Inflated Fabric Structures
2006-11-05
environmental exposure to ultraviolet rays, moisture, fire, chemicals, etc. Coating such as urethane, PVC (polyvinyl chloride), neoprene, EPDM (ethylene...tests on rubber -coated, plain-woven fabrics and established that the initial shear response was dominated by the coating and with increased shearing...Farboodmanesh, S., Chen, J., Mead, J. L., White, K., "Effect of Construction on Mechanical Behavior of Fabric Reinforced Rubber ," Rubber Division
40 CFR 53.32 - Test procedures for methods for SO2, CO, O3, and NO2.
Code of Federal Regulations, 2010 CFR
2010-07-01
... shall have a chart width of at least 25 centimeters, a response time of 1 second or less, a deadband of... appropriate time intervals such that trend plots similar to a strip chart recording may be constructed with a... facilitate visual evaluation of data submitted. (3) Allow adequate warmup or stabilization time as indicated...
Review of Aircraft Crash Structural Response Research.
1982-08-01
structures consisting of conventional built-up metallic construction and those consisting of advanced composite materials were of interest. The latter...increasing importance. Some recent theoretical and experimental studies of the behavior of composite - material structures subjected to severe static...dynamic, and/or impact conditions are noted. Such topics as crashworthiness testing ot composite fuselage structures, the impact resistance of graphite and
Adjusting for Year to Year Rater Variation in IRT Linking--An Empirical Evaluation
ERIC Educational Resources Information Center
Yen, Shu Jing; Ochieng, Charles; Michaels, Hillary; Friedman, Greg
2005-01-01
The main purpose of this study was to illustrate a polytomous IRT-based linking procedure that adjusts for rater variations. Test scores from two administrations of a statewide reading assessment were used. An anchor set of Year 1 students' constructed responses were rescored by Year 2 raters. To adjust for year-to-year rater variation in IRT…
ERIC Educational Resources Information Center
Ling, Guangming
2017-01-01
To investigate whether the type of keyboard used in exams introduces any construct-irrelevant variance to the TOEFL iBT Writing scores, we surveyed 17,040 TOEFL iBT examinees from 24 countries on their keyboard-related perceptions and preferences and analyzed the survey responses together with their test scores. Results suggest that controlling…
ERIC Educational Resources Information Center
Marsh, Herbert W.; Scalas, L. Francesca; Nagengast, Benjamin
2010-01-01
Self-esteem, typically measured by the Rosenberg Self-Esteem Scale (RSE), is one of the most widely studied constructs in psychology. Nevertheless, there is broad agreement that a simple unidimensional factor model, consistent with the original design and typical application in applied research, does not provide an adequate explanation of RSE…
A New Statistic for Evaluating Item Response Theory Models for Ordinal Data. CRESST Report 839
ERIC Educational Resources Information Center
Cai, Li; Monroe, Scott
2014-01-01
We propose a new limited-information goodness of fit test statistic C[subscript 2] for ordinal IRT models. The construction of the new statistic lies formally between the M[subscript 2] statistic of Maydeu-Olivares and Joe (2006), which utilizes first and second order marginal probabilities, and the M*[subscript 2] statistic of Cai and Hansen…
School Leaders' and Teachers' Work with National Test Results: Lost in Translation?
ERIC Educational Resources Information Center
Gunnulfsen, Ann Elisabeth
2017-01-01
Studies have shown that school leaders are important in work with large-scale policy reforms in schools. However, the issue of how school leaders and teachers discuss and enact policy is under-studied. This article explores the discursive processes in school leaders' and teachers' policy enactment as they construct responses to policy. The data…
ERIC Educational Resources Information Center
Ihme, Jan Marten; Senkbeil, Martin; Goldhammer, Frank; Gerick, Julia
2017-01-01
The combination of different item formats is found quite often in large scale assessments, and analyses on the dimensionality often indicate multi-dimensionality of tests regarding the task format. In ICILS 2013, three different item types (information-based response tasks, simulation tasks, and authoring tasks) were used to measure computer and…
Edmond P. Saliklis; Steven M. Cramer; John C. Hermanson
1998-01-01
A new method for obtaining triaxial stress versus strain data is presented. The method tests cubic specimens and can provide constitutive data along three mutually perpendicular axes. Issues of removing the effects of boundary conditions in the proposed device are discussed. Two devices were constructed and used to obtain triaxial stress versus strain data on...
ERIC Educational Resources Information Center
Sangwin, Christopher J.; Jones, Ian
2017-01-01
In this paper we report the results of an experiment designed to test the hypothesis that when faced with a question involving the inverse direction of a reversible mathematical process, students solve a multiple-choice version by verifying the answers presented to them by the direct method, not by undertaking the actual inverse calculation.…
Learning from Children: Mathematics from a Classroom Perspective. ACER Research Monograph No. 52.
ERIC Educational Resources Information Center
Doig, Brian; Lokan, Jan
This volume has been assembled to show what can be learned about learning from large groups of children's responses to well-constructed assessment questions. The wide range of information gathered through the Basic Skills Testing Program (BSTP) has been divided into chapters that focus either on key aspects of mathematics or the major concerns of…
ERIC Educational Resources Information Center
Tsaousis, Ioannis; Sideridis, Georgios; Al-Saawi, Fahad
2018-01-01
The aim of the present study was to examine Differential Distractor Functioning (DDF) as a means of improving the quality of a measure through understanding biased responses across groups. A DDF analysis could shed light on the potential sources of construct-irrelevant variance by examining whether the differential selection of incorrect choices…
Construction and tests of a fine granularity lead-scintillating fibers calorimeter
NASA Astrophysics Data System (ADS)
Branchini, P.; Ceradini, F.; Corradi, G.; Di Micco, B.; Passeri, A.
2009-04-01
We report the construction and the tests of a small prototype of the lead-scintillating fiber calorimeter of the KLOE experiment, instrumented with multianode photomultipliers to obtain a 16 times finer readout granularity. The prototype is 15 cm wide, 15 radiation lengths deep and is made of 200 layers of fibers 50 cm long. On one side it is read out with an array of 3×5 multianode photomultipliers Hamamatsu type R8900-M16, each segmented with 4×4 anodes, the read out granularity being 240 pixels of 11 × 11 mm2 corresponding to about 64 scintillating fibers each. These are interfaced to the 6 × 6 mm2 pixeled photocathode with truncated pyramid light guides made of Bicron BC-800 plastic to partially transmit the UV light. Each photomultiplier provides also an OR of the 16 last dynodes that is used for trigger. The response of the individual anodes, their relative gain and cross-talk has been measured with the light (440 nm) of a laser illuminating only few fibers on the side opposite to the readout. We finally present the first results of the calorimeter response to cosmic rays in auto-trigger mode.
Peña, N; Reviejo, A J; Pingarrón, J M
2001-08-03
The fabrication and performance of a reticulated vitreous carbon (RVC)-based tyrosinase flow-through electrode, in which the enzyme was covalently immobilized, is reported. The bioelectrode was tested as an amperometric detector for phenolic compounds. Variables affecting the construction of the enzyme flow-through electrode such as the RVC chemical pretreatment procedure, the enzyme immobilization method in the RVC matrix, the enzyme loading and the pH value of the buffer solution used, were optimized by flow-injection with amperometric detection. A good immobilization of the enzyme in the RVC matrix, in spite of the hydrodynamic conditions, was found. The same tyrosinase-RVC electrode could be used with no significant loss of the amperometric response for around 20 days, and reproducible responses could be achieved with different electrodes constructed in the same manner. Moreover, the operational stability of the bioelectrode was tested under continuous monitorization conditions. Calibration plots by flow injection with amperometric detection at -0.20 V were obtained for phenol, 2,4-dimethylphenol; 3-chlorophenol; 4-chlorophenol; 4-chloro-3-methylphenol and 2-aminophenol, with detection limits ranging from 2 mug l(-1) (4-chloro-3-methylphenol) to 2 mg l(-1).
Pendulum detector testing device
Gonsalves, J.M.
1997-09-30
A detector testing device is described which provides consistent, cost-effective, repeatable results. The testing device is primarily constructed of PVC plastic and other non-metallic materials. Sensitivity of a walk-through detector system can be checked by: (1) providing a standard test object simulating the mass, size and material content of a weapon or other contraband, (2) suspending the test object in successive positions, such as head, waist and ankle levels, simulating where the contraband might be concealed on a person walking through the detector system; and (3) swinging the suspended object through each of the positions, while operating the detector system and observing its response. The test object is retained in a holder in which the orientation of the test device or target can be readily changed, to properly complete the testing requirements. 5 figs.
Pendulum detector testing device
Gonsalves, John M.
1997-01-01
A detector testing device which provides consistent, cost-effective, repeatable results. The testing device is primarily constructed of PVC plastic and other non-metallic materials. Sensitivity of a walk-through detector system can be checked by: 1) providing a standard test object simulating the mass, size and material content of a weapon or other contraband, 2) suspending the test object in successive positions, such as head, waist and ankle levels, simulating where the contraband might be concealed on a person walking through the detector system; and 3) swinging the suspended object through each of the positions, while operating the detector system and observing its response. The test object is retained in a holder in which the orientation of the test device or target can be readily changed, to properly complete the testing requirements.
NASA Technical Reports Server (NTRS)
Krishnamurthy, Thiagarajan
2005-01-01
Response construction methods using Moving Least Squares (MLS), Kriging and Radial Basis Functions (RBF) are compared with the Global Least Squares (GLS) method in three numerical examples for derivative generation capability. Also, a new Interpolating Moving Least Squares (IMLS) method adopted from the meshless method is presented. It is found that the response surface construction methods using the Kriging and RBF interpolation yields more accurate results compared with MLS and GLS methods. Several computational aspects of the response surface construction methods also discussed.
An automated construction of error models for uncertainty quantification and model calibration
NASA Astrophysics Data System (ADS)
Josset, L.; Lunati, I.
2015-12-01
To reduce the computational cost of stochastic predictions, it is common practice to rely on approximate flow solvers (or «proxy»), which provide an inexact, but computationally inexpensive response [1,2]. Error models can be constructed to correct the proxy response: based on a learning set of realizations for which both exact and proxy simulations are performed, a transformation is sought to map proxy into exact responses. Once the error model is constructed a prediction of the exact response is obtained at the cost of a proxy simulation for any new realization. Despite its effectiveness [2,3], the methodology relies on several user-defined parameters, which impact the accuracy of the predictions. To achieve a fully automated construction, we propose a novel methodology based on an iterative scheme: we first initialize the error model with a small training set of realizations; then, at each iteration, we add a new realization both to improve the model and to evaluate its performance. More specifically, at each iteration we use the responses predicted by the updated model to identify the realizations that need to be considered to compute the quantity of interest. Another user-defined parameter is the number of dimensions of the response spaces between which the mapping is sought. To identify the space dimensions that optimally balance mapping accuracy and risk of overfitting, we follow a Leave-One-Out Cross Validation. Also, the definition of a stopping criterion is central to an automated construction. We use a stability measure based on bootstrap techniques to stop the iterative procedure when the iterative model has converged. The methodology is illustrated with two test cases in which an inverse problem has to be solved and assess the performance of the method. We show that an iterative scheme is crucial to increase the applicability of the approach. [1] Josset, L., and I. Lunati, Local and global error models for improving uncertainty quantification, Math.ematical Geosciences, 2013 [2] Josset, L., D. Ginsbourger, and I. Lunati, Functional Error Modeling for uncertainty quantification in hydrogeology, Water Resources Research, 2015 [3] Josset, L., V. Demyanov, A.H. Elsheikhb, and I. Lunati, Accelerating Monte Carlo Markov chains with proxy and error models, Computer & Geosciences, 2015 (In press)
Evaluation of submarine strain-gage systems for monitoring coastal sediment migration
NASA Technical Reports Server (NTRS)
Shideler, G. L.; Mcgrath, D. G.
1973-01-01
Single and multiple strain-gage systems were respectively evaluated as in situ point and areal sensors for monitoring sand-height variations in coastal environments. Static loading tests indicate that gage response pressure is linear for sand heights up to 24 inches. Response pressures are a function of both sand height and aggregate density, with density being influenced by both sediment texture and degree of compaction. Poorer sediment sorting and greater compaction result in higher response pressures. Field tests in a beach foreshore environment indicate that the gage systems are effective qualitative instruments for monitoring long-period migration trends of beach sediments; whereas, short-period responses are not sufficiently reliable. The durability and compactness of the gage systems must be substantially increased for effective field operations. It is recommended that the systems' qualitative potentials be further developed, whereas their development as quantitative instruments be terminated. Further development should emphasize the construction of remote recording systems designed for semipermanent installation.
Pitchford, Melanie; Ball, Linden J.; Hunt, Thomas E.; Steel, Richard
2017-01-01
We report a study examining the role of ‘cognitive miserliness’ as a determinant of poor performance on the standard three-item Cognitive Reflection Test (CRT). The cognitive miserliness hypothesis proposes that people often respond incorrectly on CRT items because of an unwillingness to go beyond default, heuristic processing and invest time and effort in analytic, reflective processing. Our analysis (N = 391) focused on people’s response times to CRT items to determine whether predicted associations are evident between miserly thinking and the generation of incorrect, intuitive answers. Evidence indicated only a weak correlation between CRT response times and accuracy. Item-level analyses also failed to demonstrate predicted response-time differences between correct analytic and incorrect intuitive answers for two of the three CRT items. We question whether participants who give incorrect intuitive answers on the CRT can legitimately be termed cognitive misers and whether the three CRT items measure the same general construct. PMID:29099840
Plant Responses to Rarified Atmospheres
NASA Technical Reports Server (NTRS)
Corey, Kenneth A.; Fowler, Philip A.; Wheeler, Raymond M.
2000-01-01
Reduced atmospheric pressures will likely be used to minimize mass and engineering requirements for plant growth habitats used in extraterrestrial applications. This report provides a brief survey of key literature related to responses of plants to atmospheric variables and a broad rationale for designing minimal atmospheres for future plant growth structures on the Martian surface. The literature and recent work suggest that atmospheric pressure limits for normal plant function are likely to be 10 kPa or perhaps slightly lower. At Kennedy Space Center, a chamber with high vacuum capability was used to design and begin construction of a system for testing plant responses to reduced pressure atmospheres. A test rack with lighting provided by 3, high-pressure sodium vapor lamps was built to conduct measurements of short-term plant responses. Initial experiments with lettuce showed that a pressure of 10 kPa resulted in a 6.1-fold increase in the rate of water loss compared to water loss at ambient pressure (101 kPa).
Cognitive declines in healthy aging: evidence from multiple aspects of interference resolution.
Pettigrew, Corinne; Martin, Randi C
2014-06-01
The present study tested the hypothesis that older adults show age-related deficits in interference resolution, also referred to as inhibitory control. Although oftentimes considered as a unitary aspect of executive function, various lines of work support the notion that interference resolution may be better understood as multiple constructs, including resistance to proactive interference (PI) and response-distractor inhibition (e.g., Friedman & Miyake, 2004). Using this dichotomy, the present study assessed whether older adults (relative to younger adults) show impaired performance across both, 1, or neither of these interference resolution constructs. To do so, we used multiple tasks to tap each construct and examined age effects at both the single task and latent variable levels. Older adults consistently demonstrated exaggerated interference effects across resistance to PI tasks. Although the results for the response-distractor inhibition tasks were less consistent at the individual task level analyses, age effects were evident on multiple tasks, as well as at the latent variable level. However, results of the latent variable modeling suggested declines in interference resolution are best explained by variance that is common to the 2 interference resolution constructs measured herein. Furthermore, the effect of age on interference resolution was found to be both distinct from declines in working memory, and independent of processing speed. These findings suggest multiple cognitive domains are independently sensitive to age, but that declines in the interference resolution constructs measured herein may originate from a common cause. PsycINFO Database Record (c) 2014 APA, all rights reserved.
Kane, Michael J.; Meier, Matt E.; Smeekens, Bridget A.; Gross, Georgina M.; Chun, Charlotte A.; Silvia, Paul J.; Kwapil, Thomas R.
2016-01-01
A large correlational study took a latent-variable approach to the generality of executive control by testing the individual-differences structure of executive-attention capabilities and assessing their prediction of schizotypy, a multidimensional construct (with negative, positive, disorganized, and paranoid factors) conveying risk for schizophrenia. Although schizophrenia is convincingly linked to executive deficits, the schizotypy literature is equivocal. Subjects completed tasks of working memory capacity (WMC), attention restraint (inhibiting prepotent responses), and attention constraint (focusing visual attention amid distractors), the latter two in an effort to fractionate the “inhibition” construct. We also assessed mind-wandering propensity (via in-task thought probes) and coefficient of variation in response times (RT CoV) from several tasks as more novel indices of executive attention. WMC, attention restraint, attention constraint, mind wandering, and RT CoV were correlated but separable constructs, indicating some distinctions among “attention control” abilities; WMC correlated more strongly with attentional restraint than constraint, and mind wandering correlated more strongly with attentional restraint, attentional constraint, and RT CoV than with WMC. Across structural models, no executive construct predicted negative schizotypy and only mind wandering and RT CoV consistently (but modestly) predicted positive, disorganized, and paranoid schizotypy; stalwart executive constructs in the schizophrenia literature — WMC and attention restraint — showed little to no predictive power, beyond restraint’s prediction of paranoia. Either executive deficits are consequences rather than risk factors for schizophrenia, or executive failures barely precede or precipitate diagnosable schizophrenia symptoms. PMID:27454042
Sörman, Karolina; Nilsonne, Gustav; Howner, Katarina; Tamm, Sandra; Caman, Shilan; Wang, Hui-Xin; Ingvar, Martin; Edens, John F; Gustavsson, Petter; Lilienfeld, Scott O; Petrovic, Predrag; Fischer, Håkan; Kristiansson, Marianne
2016-01-01
Cross-cultural investigation of psychopathy measures is important for clarifying the nomological network surrounding the psychopathy construct. The Psychopathic Personality Inventory-Revised (PPI-R) is one of the most extensively researched self-report measures of psychopathic traits in adults. To date however, it has been examined primarily in North American criminal or student samples. To address this gap in the literature, we examined PPI-R's reliability, construct validity and factor structure in non-criminal individuals (N = 227) in Sweden, using a multimethod approach including psychophysiological correlates of empathy for pain. PPI-R construct validity was investigated in subgroups of participants by exploring its degree of overlap with (i) the Psychopathy Checklist: Screening Version (PCL:SV), (ii) self-rated empathy and behavioral and physiological responses in an experiment on empathy for pain, and (iii) additional self-report measures of alexithymia and trait anxiety. The PPI-R total score was significantly associated with PCL:SV total and factor scores. The PPI-R Coldheartedness scale demonstrated significant negative associations with all empathy subscales and with rated unpleasantness and skin conductance responses in the empathy experiment. The PPI-R higher order Self-Centered Impulsivity and Fearless Dominance dimensions were associated with trait anxiety in opposite directions (positively and negatively, respectively). Overall, the results demonstrated solid reliability (test-retest and internal consistency) and promising but somewhat mixed construct validity for the Swedish translation of the PPI-R.
Sörman, Karolina; Nilsonne, Gustav; Howner, Katarina; Tamm, Sandra; Caman, Shilan; Wang, Hui-Xin; Ingvar, Martin; Edens, John F.; Gustavsson, Petter; Lilienfeld, Scott O; Petrovic, Predrag; Fischer, Håkan; Kristiansson, Marianne
2016-01-01
Cross-cultural investigation of psychopathy measures is important for clarifying the nomological network surrounding the psychopathy construct. The Psychopathic Personality Inventory-Revised (PPI-R) is one of the most extensively researched self-report measures of psychopathic traits in adults. To date however, it has been examined primarily in North American criminal or student samples. To address this gap in the literature, we examined PPI-R’s reliability, construct validity and factor structure in non-criminal individuals (N = 227) in Sweden, using a multimethod approach including psychophysiological correlates of empathy for pain. PPI-R construct validity was investigated in subgroups of participants by exploring its degree of overlap with (i) the Psychopathy Checklist: Screening Version (PCL:SV), (ii) self-rated empathy and behavioral and physiological responses in an experiment on empathy for pain, and (iii) additional self-report measures of alexithymia and trait anxiety. The PPI-R total score was significantly associated with PCL:SV total and factor scores. The PPI-R Coldheartedness scale demonstrated significant negative associations with all empathy subscales and with rated unpleasantness and skin conductance responses in the empathy experiment. The PPI-R higher order Self-Centered Impulsivity and Fearless Dominance dimensions were associated with trait anxiety in opposite directions (positively and negatively, respectively). Overall, the results demonstrated solid reliability (test-retest and internal consistency) and promising but somewhat mixed construct validity for the Swedish translation of the PPI-R. PMID:27300292
Cross-cultural adaptation of the German version of the spinal stenosis measure.
Wertli, Maria M; Steurer, Johann; Wildi, Lukas M; Held, Ulrike
2014-06-01
To validate the German version of the spinal stenosis measure (SSM), a disease-specific questionnaire assessing symptom severity, physical function, and satisfaction with treatment in patients with lumbar spinal stenosis. After translation, cross-cultural adaptation, and pilot testing, we assessed internal consistency, test-retest reliability, construct validity, and responsiveness of the SSM subscales. Data from a large Swiss multi-center prospective cohort study were used. Reference scales for the assessment of construct validity and responsiveness were the numeric rating scale, pain thermometer, and the Roland Morris Disability Questionnaire. One hundred and eight consecutive patients were included in this validation study, recruited from five different centers. Cronbach's alpha was above 0.8 for all three subscales of the SSM. The objectivity of the SSM was assessed using a partial credit approach. The model showed a good global fit to the data. Of the 108 patients 78 participated in the test-retest procedure. The ICC values were above 0.8 for all three subscales of the SSM. Correlations with reference scales were above 0.7 for the symptom and function subscales. For satisfaction subscale, it was 0.66 or above. Clinically meaningful changes of the reference scales over time were associated with significantly more improvement in all three SSM subscales (p < 0.001). Conclusion: The proposed version of the SSM showed very good measurement properties and can be considered validated for use in the German language.
Cross-cultural adaptation and validation of the Turkish version of Oxford hip score.
Tuğay, Baki Umut; Tuğay, Nazan; Güney, Hande; Hazar, Zeynep; Yüksel, İnci; Atilla, Bülent
2015-06-01
The purpose of this study was to translate the Oxford hip score (OHS) into Turkish and to evaluate the psychometric properties by testing the internal consistency, reproducibility, construct validity, and responsiveness in patients with hip osteoarthritis (OA). Oxford hip score was translated and culturally adapted according to the guidelines in the literature. Seventy patients (mean age 61.45 ± 9.29 years) with hip osteoarthritis participated in the study. Patients completed the Turkish Oxford hip score (OHS-TR), the Short-Form 36 (SF-36), and Western Ontario and McMaster Universities Index (WOMAC). Internal consistency was tested using Cronbach's α coefficient. Patients completed OHS-TR questionnaire twice in 7 days for determining the reproducibility. Correlation between the total results of both tests was determined by the Pearson correlation coefficient and intraclass correlation coefficient (ICC). Validity was assessed by calculating the Pearson correlation coefficient between the OHS-TR and WOMAC and SF-36 scores. Floor and ceiling effects were analyzed. The internal consistency was high (Cronbach's α 0.93). The construct validity showed a significant correlation between the OHS-TR and WOMAC and related SF-36 domains (p < 0.001). The ICC's ranged between 0.80 and 0.99. There was no floor or ceiling effect in total OHS-TR score. The OHS-TR questionnaire is valid, reliable, and responsive for the Turkish-speaking patients with hip OA.
NASA Technical Reports Server (NTRS)
Schutter, K. J.; Gaume, J. G.; Duskin, F. E.
1981-01-01
Eight different seat cushion configurations were subjected to full-scale burn tests. Each cushion configuration was tested twice for a total of sixteen tests. Two different fire sources were used. They consisted of one liter of Jet A fuel for eight tests and a radiant energy source with propane flame for eight tests. Both fire sources were ignited by a propane flame. During each test, data were recorded for smoke density, cushion temperatures, radiant heat flux, animal response to combustion products, rate of weight loss of test specimens, cabin temperature, and for the type and content of gas within the cabin atmosphere. When compared to existing passenger aircraft seat cushions, the test specimens incorporating a fire barrier and those fabricated from advanced materials, using improved construction methods, exhibited significantly greater fire resistance.
Sensitivity of the immature rat uterotrophic assay to mixtures of estrogens.
Tinwell, Helen; Ashby, John
2004-01-01
We have evaluated whether mixtures of estrogens, present in the mix at doses that are individually inactive in the immature rat uterotrophic assay, can give a uterotrophic response. Seven chemicals were evaluated: nonylphenol, bisphenol A (BPA), methoxychlor, genistein (GEN), estradiol, diethylstilbestrol, and ethinyl estradiol. Dose responses in the uterotrophic assay were constructed for each chemical. The first series of experiments involved evaluating binary mixtures of BPA and GEN at dose levels that gave moderate uterotrophic responses when tested individually. The mixtures generally showed an intermediate or reduced uterotrophic effect compared with when the components of the mixture were tested alone at the dose used in the mixture. The next series of experiments used a multicomponent (complex) mixture of all seven chemicals evaluated at doses that gave either weakly positive or inactive uterotrophic responses when tested individually in the assay. Doses that were nominally equi-uterotrophic ranged over approximately six orders of magnitude for the seven chemicals. Doses of agents that gave a weak uterotrophic response when tested individually gave a marginally enhanced positive response in the assay when tested combined as a mixture. Doses of agents that gave a negative uterotrophic response when tested individually gave a positive response when tested as a mixture. These data indicate that a variety of different estrogen receptor (ER) agonists, present individually at subeffective doses, can act simultaneously to evoke an ER-regulated response. However, translating these findings into the process of environmental hazard assessment will be difficult. The simple addition of the observed, or predicted, activities for the components of a mixture is confirmed here to be inappropriate and to overestimate the actual effect induced by the mixture. Equally, isobole analysis is only suitable for two- or three-component mixtures, and concentration addition requires access to dose-response data and EC50 values (concentration giving 50% of the maximum response) for the individual components of the mixture--requirements that will rarely be fulfilled for complex environmental samples. Given these uncertainties, we conclude that it may be most expedient to select and bioassay whole environmental mixtures of potential concern. PMID:15064164
Generalization of a tactile stimulus in horses.
Dougherty, D M; Lewis, P
1993-01-01
Using horses, we investigated the control of operant behavior by a tactile stimulus (the training stimulus) and the generalization of behavior to six other similar test stimuli. In a stall, the experimenters mounted a response panel in the doorway. Located on this panel were a response lever and a grain dispenser. The experimenters secured a tactile-stimulus belt to the horse's back. The stimulus belt was constructed by mounting seven solenoids along a piece of burlap in a manner that allowed each to provide the delivery of a tactile stimulus, a repetitive light tapping, at different locations (spaced 10.0 cm apart) along the horse's back. Two preliminary steps were necessary before generalization testing: training a measurable response (lip pressing) and training on several reinforcement schedules in the presence of a training stimulus (tapping by one of the solenoids). We then gave each horse two generalization test sessions. Results indicated that the horses' behavior was effectively controlled by the training stimulus. Horses made the greatest number of responses to the training stimulus, and the tendency to respond to the other test stimuli diminished as the stimuli became farther away from the training stimulus. These findings are discussed in the context of behavioral principles and their relevance to the training of horses. PMID:8315368
Generalization of a tactile stimulus in horses.
Dougherty, D M; Lewis, P
1993-05-01
Using horses, we investigated the control of operant behavior by a tactile stimulus (the training stimulus) and the generalization of behavior to six other similar test stimuli. In a stall, the experimenters mounted a response panel in the doorway. Located on this panel were a response lever and a grain dispenser. The experimenters secured a tactile-stimulus belt to the horse's back. The stimulus belt was constructed by mounting seven solenoids along a piece of burlap in a manner that allowed each to provide the delivery of a tactile stimulus, a repetitive light tapping, at different locations (spaced 10.0 cm apart) along the horse's back. Two preliminary steps were necessary before generalization testing: training a measurable response (lip pressing) and training on several reinforcement schedules in the presence of a training stimulus (tapping by one of the solenoids). We then gave each horse two generalization test sessions. Results indicated that the horses' behavior was effectively controlled by the training stimulus. Horses made the greatest number of responses to the training stimulus, and the tendency to respond to the other test stimuli diminished as the stimuli became farther away from the training stimulus. These findings are discussed in the context of behavioral principles and their relevance to the training of horses.
Construct Validity of the Nepalese School Leaving English Reading Test
ERIC Educational Resources Information Center
Dawadi, Saraswati; Shrestha, Prithvi N.
2018-01-01
There has been a steady interest in investigating the validity of language tests in the last decades. Despite numerous studies on construct validity in language testing, there are not many studies examining the construct validity of a reading test. This paper reports on a study that explored the construct validity of the English reading test in…
Optical characterization of ultra-sensitive TES bolometers for SAFARI
NASA Astrophysics Data System (ADS)
Audley, Michael D.; de Lange, Gerhard; Gao, Jian-Rong; Khosropanah, Pourya; Mauskopf, Philip D.; Morozov, Dmitry; Trappe, Neil A.; Doherty, Stephen; Withington, Stafford
2014-07-01
We have characterized the optical response of prototype detectors for SAFARI, the far-infrared imaging spectrometer for the SPICA satellite. SAFARI's three bolometer arrays will image a 2'×2' field of view with spectral information over the wavelength range 34—210 μm. SAFARI requires extremely sensitive detectors (goal NEP ~ 0.2 aW/√Hz), with correspondingly low saturation powers (~5 fW), to take advantage of SPICA's cooled optics. We have constructed an ultra-low background optical test facility containing an internal cold black-body illuminator and have recently added an internal hot black-body source and a light-pipe for external illumination. We illustrate the performance of the test facility with results including spectral-response measurements. Based on an improved understanding of the optical throughput of the test facility we find an optical efficiency of 60% for prototype SAFARI detectors.
Application of Item Response Theory to Tests of Substance-related Associative Memory
Shono, Yusuke; Grenard, Jerry L.; Ames, Susan L.; Stacy, Alan W.
2015-01-01
A substance-related word association test (WAT) is one of the commonly used indirect tests of substance-related implicit associative memory and has been shown to predict substance use. This study applied an item response theory (IRT) modeling approach to evaluate psychometric properties of the alcohol- and marijuana-related WATs and their items among 775 ethnically diverse at-risk adolescents. After examining the IRT assumptions, item fit, and differential item functioning (DIF) across gender and age groups, the original 18 WAT items were reduced to 14- and 15-items in the alcohol- and marijuana-related WAT, respectively. Thereafter, unidimensional one- and two-parameter logistic models (1PL and 2PL models) were fitted to the revised WAT items. The results demonstrated that both alcohol- and marijuana-related WATs have good psychometric properties. These results were discussed in light of the framework of a unified concept of construct validity (Messick, 1975, 1989, 1995). PMID:25134051
Fiori, Marina; Antonietti, Jean-Philippe; Mikolajczak, Moira; Luminet, Olivier; Hansenne, Michel; Rossier, Jérôme
2014-01-01
The ability approach has been indicated as promising for advancing research in emotional intelligence (EI). However, there is scarcity of tests measuring EI as a form of intelligence. The Mayer Salovey Caruso Emotional Intelligence Test, or MSCEIT, is among the few available and the most widespread measure of EI as an ability. This implies that conclusions about the value of EI as a meaningful construct and about its utility in predicting various outcomes mainly rely on the properties of this test. We tested whether individuals who have the highest probability of choosing the most correct response on any item of the test are also those who have the strongest EI ability. Results showed that this is not the case for most items: The answer indicated by experts as the most correct in several cases was not associated with the highest ability; furthermore, items appeared too easy to challenge individuals high in EI. Overall results suggest that the MSCEIT is best suited to discriminate persons at the low end of the trait. Results are discussed in light of applied and theoretical considerations.
High-temperature acoustic test facilities and methods
NASA Astrophysics Data System (ADS)
Pearson, Jerome
1994-09-01
The Wright Laboratory is the Air Force center for air vehicles, responsible for developing advanced technology and incorporating it into new flight vehicles and for continuous technological improvement of operational air vehicles. Part of that responsibility is the problem of acoustic fatigue. With the advent of jet aircraft in the 1950's, acoustic fatigue of aircraft structure became a significant problem. In the 1960's the Wright Laboratory constructed the first large acoustic fatigue test facilities in the United States, and the laboratory has been a dominant factor in high-intensity acoustic testing since that time. This paper discusses some of the intense environments encountered by new and planned Air Force flight vehicles, and describes three new acoustic test facilities of the Wright Laboratory designed for testing structures in these dynamic environments. These new test facilities represent the state of the art in high-temperature, high-intensity acoustic testing and random fatigue testing. They will allow the laboratory scientists and engineers to test the new structures and materials required to withstand the severe environments of captive-carry missiles, augmented lift wings and flaps, exhaust structures of stealth aircraft, and hypersonic vehicle structures well into the twenty-first century.
An Italian battery for the assessment of semantic memory disorders.
Catricalà, Eleonora; Della Rosa, Pasquale A; Ginex, Valeria; Mussetti, Zoe; Plebani, Valentina; Cappa, Stefano F
2013-06-01
We report the construction and standardization of a new comprehensive battery of tests for the assessment of semantic memory disorders. The battery is constructed on a common set of 48 stimuli, belonging to both living and non-living categories, rigidly controlled for several confounding variables, and is based on an empirically derived corpus of semantic features. It includes six tasks, in order to assess semantic memory through different modalities of input and output: two naming tasks, one with colored pictures and the other in response to an oral description, a word-picture matching task, a picture sorting task, a free generation of features task and a sentence verification task. Normative data on 106 Italian subjects pooled across homogenous subgroups for age, sex and education are reported. The new battery allows an in-depth investigation of category-specific disorders and of progressive semantic memory deficits at features level, overcoming some of the limitations of existing tests.
Calibration of the Test of Relational Reasoning.
Dumas, Denis; Alexander, Patricia A
2016-10-01
Relational reasoning, or the ability to discern meaningful patterns within a stream of information, is a critical cognitive ability associated with academic and professional success. Importantly, relational reasoning has been described as taking multiple forms, depending on the type of higher order relations being drawn between and among concepts. However, the reliable and valid measurement of such a multidimensional construct of relational reasoning has been elusive. The Test of Relational Reasoning (TORR) was designed to tap 4 forms of relational reasoning (i.e., analogy, anomaly, antinomy, and antithesis). In this investigation, the TORR was calibrated and scored using multidimensional item response theory in a large, representative undergraduate sample. The bifactor model was identified as the best-fitting model, and used to estimate item parameters and construct reliability. To improve the usefulness of the TORR to educators, scaled scores were also calculated and presented. (PsycINFO Database Record (c) 2016 APA, all rights reserved).
Moore, Holly; Geyer, Mark A; Carter, Cameron S; Barch, Deanna M
2013-11-01
Over the past two decades, the awareness of the disabling and treatment-refractory effects of impaired cognition in schizophrenia has increased dramatically. In response to this still unmet need in the treatment of schizophrenia, the Cognitive Neuroscience Treatment Research to Improve Cognition in Schizophrenia (CNTRICS) initiative was developed. The goal of CNTRICS is to harness cognitive neuroscience to develop a brain-based set of tools for measuring cognition in schizophrenia and to test new treatments. CNTRICS meetings focused on development of tasks with cognitive construct validity for use in both human and animal model studies. This special issue presents papers discussing the cognitive testing paradigms selected by CNTRICS for animal model systems. These paradigms are designed to measure cognitive constructs within the domains of perception, attention, executive function, working memory, object/relational long-term memory, and social/affective processes. Copyright © 2013. Published by Elsevier Ltd.
Moore, Holly; Geyer, Mark A.; Carter, Cameron S.; Barch, Deanna M.
2014-01-01
Over the past two decades, the awareness of the disabling and treatment-refractory effects of impaired cognition in schizophrenia has increased dramatically. In response to this still unmet need in the treatment of schizophrenia, the Cognitive Neuroscience Treatment Research to Improve Cognition in Schizophrenia (CNTRICS) initiative was developed. The goal of CNTRICS is to harness cognitive neuroscience to develop a brain-based set of tools for measuring cognition in schizophrenia and to test new treatments. CNTRICS meetings focused on development of tasks with cognitive construct validity for use in both human and animal model studies. This special issue presents papers discussing the cognitive testing paradigms selected by CNTRICS for animal model systems. These paradigms are designed to measure cognitive constructs within the domains of perception, attention, executive function, working memory, object/relational long-term memory, and social/affective processes. PMID:24090823
ERIC Educational Resources Information Center
Preston, Kathleen Suzanne Johnson; Parral, Skye N.; Gottfried, Allen W.; Oliver, Pamella H.; Gottfried, Adele Eskeles; Ibrahim, Sirena M.; Delany, Danielle
2015-01-01
A psychometric analysis was conducted using the nominal response model under the item response theory framework to construct the Positive Family Relationships scale. Using data from the Fullerton Longitudinal Study, this scale was constructed within a long-term longitudinal framework spanning middle childhood through adolescence. Items tapping…
Kleemans, Mariska; Schlindwein, Luise F; Dohmen, Roos
2017-09-01
Watching news is important for preadolescents, but it may also harm their well-being. This study examined whether applying insights from positive psychology to news production can reduce this potential harm, by reducing negative emotional responses and enhancing positive emotional responses to negative news, and by encouraging prosocial intentions. Moreover, we explored whether peer discussion strengthened these effects. Preadolescents (n = 336; 9-13 years old; 48.5% female) were exposed to either constructive (solution-based news including positive emotions) or nonconstructive news. Subsequently, half of the children assigned to the constructive and the nonconstructive condition participated in a peer discussion. The findings showed that exposure to constructive news resulted in more positive emotional responses and less negative emotional responses as compared to nonconstructive news. Moreover, discussing the news with peers led to more positive and less negative emotional responses among preadolescents who watched the nonconstructive newscast, and to more prosocial intentions among preadolescents who watched constructive news. In all, constructive news reporting and peer discussion could function as tools to make negative news less harmful for preadolescents.
Samide, Michael J; Smith, Gregory D
2015-12-24
Construction materials used in museums for the display, storage, and transportation of artwork must be assessed for their tendency to emit harmful pollution that could potentially damage cultural treasures. Traditionally, a subjective metals corrosion test known as the Oddy test has been widely utilized in museums for this purpose. To augment the Oddy test, an instrumental sampling approach based on evolved gas analysis (EGA) coupled to gas chromatography (GC) with mass spectral (MS) detection has been implemented for the first time to qualitatively identify off-gassed pollutants under specific conditions. This approach is compared to other instrumental methods reported in the literature. This novel application of the EGA sampling technique yields several benefits over traditional testing, including rapidity, high sensitivity, and broad detectability of volatile organic compounds (VOCs). Furthermore, unlike other reported instrumental approaches, the EGA method was used to determine quantitatively the amount of VOCs emitted by acetate resins and polyurethane foams under specific conditions using both an external calibration method as well as surrogate response factors. EGA was successfully employed to rapidly characterize emissions from 12 types of common plastics. This analysis is advocated as a rapid pre-screening method to rule out poorly performing materials prior to investing time and energy in Oddy testing. The approach is also useful for rapid, routine testing of construction materials previously vetted by traditional testing, but which may experience detrimental formulation changes over time. As an example, a case study on batch re-orders of rigid expanded poly(vinyl chloride) board stock is presented. Copyright © 2015 Elsevier B.V. All rights reserved.
Analysis and design of a second-order digital phase-locked loop
NASA Technical Reports Server (NTRS)
Blasche, P. R.
1979-01-01
A specific second-order digital phase-locked loop (DPLL) was modeled as a first-order Markov chain with alternatives. From the matrix of transition probabilities of the Markov chain, the steady-state phase error of the DPLL was determined. In a similar manner the loop's response was calculated for a fading input. Additionally, a hardware DPLL was constructed and tested to provide a comparison to the results obtained from the Markov chain model. In all cases tested, good agreement was found between the theoretical predictions and the experimental data.
NASA Technical Reports Server (NTRS)
Davis, C. W.; Lathrop, J. W.
1985-01-01
Attention is given to the construction, calibration, and performance of a repeatable measurement system for use in conjunction with the accelerated stress testing of a-Si:H cells. A filtered diode array is utilized to approximate the spectral response of any type of solar cell in discrete portions of the spectrum. It is noted that in order to achieve the necessary degree of overall repeatability, it is necessary to pay particular attention to methods of contacting and positioning the cells.
Experimental Study on New Multi-Column Tension-Leg-Type Floating Wind Turbine
NASA Astrophysics Data System (ADS)
Zhao, Yong-sheng; She, Xiao-he; He, Yan-ping; Yang, Jian-min; Peng, Tao; Kou, Yu-feng
2018-04-01
Deep-water regions often have winds favorable for offshore wind turbines, and floating turbines currently show the greatest potential to exploit such winds. This work established proper scaling laws for model tests, which were then implemented in the construction of a model wind turbine with optimally designed blades. The aerodynamic, hydrodynamic, and elastic characteristics of the proposed new multi-column tension-leg-type floating wind turbine (WindStar TLP system) were explored in the wave tank testing of a 1:50 scale model at the State Key Laboratory of Ocean Engineering at Shanghai Jiao Tong University. Tests were conducted under conditions of still water, white noise waves, irregular waves, and combined wind, wave, and current loads. The results established the natural periods of the motion, damping, motion response amplitude operators, and tendon tensions of the WindStar TLP system under different environmental conditions, and thus could serve as a reference for further research. Key words: floating wind turbine, model test, WindStar TLP, dynamic response
Johnston, Marie; Dixon, Diane; Hart, Jo; Glidewell, Liz; Schröder, Carin; Pollard, Beth
2014-05-01
In studies involving theoretical constructs, it is important that measures have good content validity and that there is not contamination of measures by content from other constructs. While reliability and construct validity are routinely reported, to date, there has not been a satisfactory, transparent, and systematic method of assessing and reporting content validity. In this paper, we describe a methodology of discriminant content validity (DCV) and illustrate its application in three studies. Discriminant content validity involves six steps: construct definition, item selection, judge identification, judgement format, single-sample test of content validity, and assessment of discriminant items. In three studies, these steps were applied to a measure of illness perceptions (IPQ-R) and control cognitions. The IPQ-R performed well with most items being purely related to their target construct, although timeline and consequences had small problems. By contrast, the study of control cognitions identified problems in measuring constructs independently. In the final study, direct estimation response formats for theory of planned behaviour constructs were found to have as good DCV as Likert format. The DCV method allowed quantitative assessment of each item and can therefore inform the content validity of the measures assessed. The methods can be applied to assess content validity before or after collecting data to select the appropriate items to measure theoretical constructs. Further, the data reported for each item in Appendix S1 can be used in item or measure selection. Statement of contribution What is already known on this subject? There are agreed methods of assessing and reporting construct validity of measures of theoretical constructs, but not their content validity. Content validity is rarely reported in a systematic and transparent manner. What does this study add? The paper proposes discriminant content validity (DCV), a systematic and transparent method of assessing and reporting whether items assess the intended theoretical construct and only that construct. In three studies, DCV was applied to measures of illness perceptions, control cognitions, and theory of planned behaviour response formats. Appendix S1 gives content validity indices for each item of each questionnaire investigated. Discriminant content validity is ideally applied while the measure is being developed, before using to measure the construct(s), but can also be applied after using a measure. © 2014 The British Psychological Society.
Storybridging: Four steps for constructing effective health narratives
Boeijinga, Anniek; Hoeken, Hans; Sanders, José
2017-01-01
Objective: To develop a practical step-by-step approach to constructing narrative health interventions in response to the mixed results and wide diversity of narratives used in health-related narrative persuasion research. Method: Development work was guided by essential narrative characteristics as well as principles enshrined in the Health Action Process Approach. Results: The ‘storybridging’ method for constructing health narratives is described as consisting of four concrete steps: (a) identifying the stage of change, (b) identifying the key elements, (c) building the story, and (d) pre-testing the story. These steps are illustrated by means of a case study in which an effective narrative health intervention was developed for Dutch truck drivers: a high-risk, underprivileged occupational group. Conclusion: Although time and labour intensive, the Storybridging approach suggests integrating the target audience as an important stakeholder throughout the development process. Implications and recommendations are provided for health promotion targeting truck drivers specifically and for constructing narrative health interventions in general. PMID:29276232
The Shock and Vibration Digest. Volume 18, Number 8
1986-08-01
the swash plate . This is an active that vibration can be reduced by separation of control system...element program model . ture-borne sound intensity has been tried earlier The agreement is shown to be very good. A on thin- plate constructions in ...predicting the response of two displacement controlled laboratory tests that were used for the determination of the model parameters. 86-1532
Solid State Audio/Speech Processor Analysis.
1980-03-01
techniques. The techniques were demonstrated to be worthwhile in an efficient realtime AWR system. Finally, microprocessor architectures were designed to...do not include custom chip development, detailed hardware design , construction or testing. ITTDCD is very encouraged by the results obtained in this...California, Berkley, was responsible for furnishing the simulation data of OD speech analysis techniques and for the design and development of the hardware OD
ERIC Educational Resources Information Center
Suvannatsiri, Ratchasak; Santichaianant, Kitidech; Murphy, Elizabeth
2015-01-01
This paper reports on a project in which students designed, constructed and tested a model of an existing early warning system with simulation of debris flow in a context of a landslide. Students also assessed rural community members' knowledge of this system and subsequently taught them to estimate the time needed for evacuation of the community…
ERIC Educational Resources Information Center
Stenner, A. Jackson; Burdick, Donald S.
This document discusses in depth the theoretical background of the Lexile Framework, which is based on the assumption that reading comprehension is the best predictor of success in higher education and job performance, and that it is the most tested construct in education. The first section defines measurement and differentiates between specific…
NASA Technical Reports Server (NTRS)
Yang, J. C. S.; Tsui, C. Y.
1977-01-01
Elastic wave propagation and attenuation in a model fiber matrix was investigated. Damping characteristics in graphite epoxy composite materials were measured. A sound transmission test facility suitable to incorporate into NASA Ames wind tunnel for measurement of transmission loss due to sound generation in boundary layers was constructed. Measurement of transmission loss of graphite epoxy composite panels was also included.
ERIC Educational Resources Information Center
Gullie, Kathy A.
2011-01-01
This study investigated the predictive ability of students' responses to open-ended, constructed/extended questions in third and fourth grade mathematics content subcategories on subsequent fifth grade mathematics achievement proficiency levels. Open-ended, extended/constructed response questions reflected content as outlined by the National…
Hill, Bridget; Pallant, Julie; Williams, Gavin; Olver, John; Ferris, Scott; Bialocerkowski, Andrea
2016-12-01
To evaluate the internal construct validity and dimensionality of a new patient-reported outcome measure for people with traumatic brachial plexus injury (BPI) based on the International Classification of Functioning, Disability and Health definition of activity. Cross-sectional study. Outpatient clinics. Adults (age range, 18-82y) with a traumatic BPI (N=106). There were 106 people with BPI who completed a 51-item 5-response questionnaire. Responses were analyzed in 4 phases (missing responses, item correlations, exploratory factor analysis, and Rasch analysis) to evaluate the properties of fit to the Rasch model, threshold response, local dependency, dimensionality, differential item functioning, and targeting. Not applicable, as this study addresses the development of an outcome measure. Six items were deleted for missing responses, and 10 were deleted for high interitem correlations >.81. The remaining 35 items, while demonstrating fit to the Rasch model, showed evidence of local dependency and multidimensionality. Items were divided into 3 subscales: dressing and grooming (8 items), arm and hand (17 items), and no hand (6 items). All 3 subscales demonstrated fit to the model with no local dependency, minimal disordered thresholds, no unidimensionality or differential item functioning for age, time postinjury, or self-selected dominance. Subscales were combined into 3 subtests and demonstrated fit to the model, no misfit, and unidimensionality, allowing calculation of a summary score. This preliminary analysis supports the internal construct validity of the Brachial Assessment Tool, a unidimensional targeted 4-response patient-reported outcome measure designed to solely assess activity after traumatic BPI regardless of level of injury, age at recruitment, premorbid limb dominance, and time postinjury. Further examination is required to determine test-retest reliability and responsiveness. Copyright © 2016 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.
Ghahremani, Leila; Harami, Zahra Khiyali; Kaveh, Mohammad Hossein; Keshavarzi, Sareh
2016-01-01
Cervical cancer is known as one of the most prevalent types of cancers and a major public health problem in developing countries which can be detected by Pap test, prevented, and treated. Despite the effective role of Pap test in decreasing the incidence and mortality due to cervical cancer, it is still one the most common causes of cancer-related deaths among women, especially in developing countries. Thus, this study aimed to examine the effect of educational interventions implemented by health volunteers based on protection motivation theory (PMT) on promoting Pap test use among women. This quasi-experimental study was conducted on 60 health volunteers and 420 women. The study participants were divided into an intervention and a control group. Data were collected using a valid self-reported questionnaire including demographic variables and PMT constructs which was completed by both groups before and 2 months after the intervention. Then, the data were entered into the SPSS statistical software, version 19 and were analyzed using Chi-square test, independent T-test, and descriptive statistical methods. P<0.05 was considered as statistically significant. The findings of this study showed that the mean scores of PMT constructs (i.e. perceived vulnerability, perceived severity, fear, response-costs, self-efficacy, and intention) increased in the intervention group after the intervention (P<0.001). However, no significant difference was found between the two groups regarding response efficacy after the intervention (P=0.06). The rate of Pap test use also increased by about 62.9% among the study women. This study showed a significant positive relationship between PMT-based training and Pap test use. The results also revealed the successful contribution of health volunteers to training cervical cancer screening. Thus, training interventions based on PMT are suggested to be designed and implemented and health volunteers are recommended to be employed for educational purposes and promoting the community's, especially women's, health.
Vangnai, Alisa S; Kataoka, Naoya; Soonglerdsongpha, Suwat; Kalambaheti, Chatvalee; Tajima, Takahisa; Kato, Junichi
2012-12-01
Aniline and chlorinated anilines (CAs) are classified as priority pollutants; therefore, an effective method for detection and monitoring is required. In this study, a green-fluorescence protein-based bioreporter for the detection of aniline and CAs was constructed in Escherichia coli DH5α, characterized and tested with soil and wastewater. The sensing capability relied on the regulatory control between a two-component regulatory protein, TodS/TodT, and the P( todX ) promoter of Pseudomonas putida T-57 (PpT57), since the gene expression of todS, todT, and todC2 are positively induced with 4-chloroaniline. The bioreporter system (DH5α/pPXGFP-pTODST) is markedly unique with the two co-existing plasmids. The inducibility of the fluorescence response was culture-medium- and time-dependent. Cells grown in M9G medium exhibited a low background fluorescence level and were readily induced by 4CA after 3-h exposure, reaching the maximum induction level at 9 h. When tested with benzene, toluene, ethyl-benzene and xylene, aniline and CAs, the response data were best fit by a sigmoidal dose-response relationship, from which the K(½) value was determined for the positive effectors. 3CA and 4CA were relatively powerful inducers, while some poly-chlorinated anilines could also induce green fluorescence protein expression. The results indicated a broader recognition range of PpT57'sTodST than previously reported for P. putida. The test results with environmental samples were reliable, indicating the potential application of this bioreporter in the ecotoxicology assessment and bioremediation of areas contaminated with aniline- and/or CAs.
Flosadottir, Vala; Roos, Ewa M; Ageberg, Eva
2017-09-01
The Activity Rating Scale (ARS) for disorders of the knee evaluates the level of activity by the frequency of participation in 4 separate activities with high demands on knee function, with a score ranging from 0 (none) to 16 (pivoting activities 4 times/wk). To translate and cross-culturally adapt the ARS into Swedish and to assess measurement properties of the Swedish version of the ARS. Cohort study (diagnosis); Level of evidence, 2. The COSMIN guidelines were followed. Participants (N = 100 [55 women]; mean age, 27 years) who were undergoing rehabilitation for a knee injury completed the ARS twice for test-retest reliability. The Knee injury and Osteoarthritis Outcome Score (KOOS), Tegner Activity Scale (TAS), and modernized Saltin-Grimby Physical Activity Level Scale (SGPALS) were administered at baseline to validate the ARS. Construct validity and responsiveness of the ARS were evaluated by testing predefined hypotheses regarding correlations between the ARS, KOOS, TAS, and SGPALS. The Cronbach alpha, intraclass correlation coefficients, absolute reliability, standard error of measurement, smallest detectable change, and Spearman rank-order correlation coefficients were calculated. The ARS showed good internal consistency (α ≈ 0.96), good test-retest reliability (intraclass correlation coefficient >0.9), and no systematic bias between measurements. The standard error of measurement was less than 2 points, and the smallest detectable change was less than 1 point at the group level and less than 5 points at the individual level. More than 75% of the hypotheses were confirmed, indicating good construct validity and good responsiveness of the ARS. The Swedish version of the ARS is valid, reliable, and responsive for evaluating the level of activity based on the frequency of participation in high-demand knee sports activities in young adults with a knee injury.
Validating MEDIQUAL Constructs
NASA Astrophysics Data System (ADS)
Lee, Sang-Gun; Min, Jae H.
In this paper, we validate MEDIQUAL constructs through the different media users in help desk service. In previous research, only two end-users' constructs were used: assurance and responsiveness. In this paper, we extend MEDIQUAL constructs to include reliability, empathy, assurance, tangibles, and responsiveness, which are based on the SERVQUAL theory. The results suggest that: 1) five MEDIQUAL constructs are validated through the factor analysis. That is, importance of the constructs have relatively high correlations between measures of the same construct using different methods and low correlations between measures of the constructs that are expected to differ; and 2) five MEDIQUAL constructs are statistically significant on media users' satisfaction in help desk service by regression analysis.
Measurement of latent cognitive abilities involved in concept identification learning.
Thomas, Michael L; Brown, Gregory G; Gur, Ruben C; Moore, Tyler M; Patt, Virginie M; Nock, Matthew K; Naifeh, James A; Heeringa, Steven; Ursano, Robert J; Stein, Murray B
2015-01-01
We used cognitive and psychometric modeling techniques to evaluate the construct validity and measurement precision of latent cognitive abilities measured by a test of concept identification learning: the Penn Conditional Exclusion Test (PCET). Item response theory parameters were embedded within classic associative- and hypothesis-based Markov learning models and were fitted to 35,553 Army soldiers' PCET data from the Army Study to Assess Risk and Resilience in Servicemembers (Army STARRS). Data were consistent with a hypothesis-testing model with multiple latent abilities-abstraction and set shifting. Latent abstraction ability was positively correlated with number of concepts learned, and latent set-shifting ability was negatively correlated with number of perseverative errors, supporting the construct validity of the two parameters. Abstraction was most precisely assessed for participants with abilities ranging from 1.5 standard deviations below the mean to the mean itself. Measurement of set shifting was acceptably precise only for participants making a high number of perseverative errors. The PCET precisely measures latent abstraction ability in the Army STARRS sample, especially within the range of mildly impaired to average ability. This precision pattern is ideal for a test developed to measure cognitive impairment as opposed to cognitive strength. The PCET also measures latent set-shifting ability, but reliable assessment is limited to the impaired range of ability, reflecting that perseverative errors are rare among cognitively healthy adults. Integrating cognitive and psychometric models can provide information about construct validity and measurement precision within a single analytical framework.
Research on Subjective Response to Simulated Sonic Booms at NASA Langley Research Center
NASA Technical Reports Server (NTRS)
Sullivan, Brenda M.
2005-01-01
Over the past 15 years, NASA Langley Research Center has conducted many tests investigating subjective response to simulated sonic booms. Most tests have used the Sonic Boom Booth, an airtight concrete booth fitted with loudspeakers that play synthesized sonic booms pre-processed to compensate for the response of the booth/loudspeaker system. Tests using the Booth have included investigations of shaped booms, booms with simulated ground reflections, recorded booms, outdoor and indoor booms, booms with differing loudness for bow and tail shocks, and comparisons of aircraft flyover recordings with sonic booms. Another study used loudspeakers placed inside people s houses, so that they could experience the booms while in their own homes. This study investigated the reactions of people to different numbers of booms heard within a 24-hour period. The most recent Booth test used predicted boom shapes from candidate low-boom aircraft. At present, a test to compare the Booth with boom simulators constructed by Gulfstream Aerospace Corporation and Lockheed Martin Aeronautics Company is underway. The Lockheed simulator is an airtight booth similar to the Langley booth; the Gulfstream booth uses a traveling wave method to create the booms. Comparison of "realism" as well as loudness and other descriptors is to be studied.
Cacace, Anthony T; McFarland, Dennis J
2013-01-01
Tests of auditory perception, such as those used in the assessment of central auditory processing disorders ([C]APDs), represent a domain in audiological assessment where measurement of this theoretical construct is often confounded by nonauditory abilities due to methodological shortcomings. These confounds include the effects of cognitive variables such as memory and attention and suboptimal testing paradigms, including the use of verbal reproduction as a form of response selection. We argue that these factors need to be controlled more carefully and/or modified so that their impact on tests of auditory and visual perception is only minimal. To advocate for a stronger theoretical framework than currently exists and to suggest better methodological strategies to improve assessment of auditory processing disorders (APDs). Emphasis is placed on adaptive forced-choice psychophysical methods and the use of matched tasks in multiple sensory modalities to achieve these goals. Together, this approach has potential to improve the construct validity of the diagnosis, enhance and develop theory, and evolve into a preferred method of testing. Examination of methods commonly used in studies of APDs. Where possible, currently used methodology is compared to contemporary psychophysical methods that emphasize computer-controlled forced-choice paradigms. In many cases, the procedures used in studies of APD introduce confounding factors that could be minimized if computer-controlled forced-choice psychophysical methods were utilized. Ambiguities of interpretation, indeterminate diagnoses, and unwanted confounds can be avoided by minimizing memory and attentional demands on the input end and precluding the use of response-selection strategies that use complex motor processes on the output end. Advocated are the use of computer-controlled forced-choice psychophysical paradigms in combination with matched tasks in multiple sensory modalities to enhance the prospect of obtaining a valid diagnosis. American Academy of Audiology.
Peterson, Alexander C; Sutherland, Jason M; Liu, Guiping; Crump, R Trafford; Karimuddin, Ahmer A
2018-06-01
The Fecal Incontinence Quality of Life Scale (FIQL) is a commonly used patient-reported outcome measure for fecal incontinence, often used in clinical trials, yet has not been validated in English since its initial development. This study uses modern methods to thoroughly evaluate the psychometric characteristics of the FIQL and its potential for differential functioning by gender. This study analyzed prospectively collected patient-reported outcome data from a sample of patients prior to colorectal surgery. Patients were recruited from 14 general and colorectal surgeons in Vancouver Coastal Health hospitals in Vancouver, Canada. Confirmatory factor analysis was used to assess construct validity. Item response theory was used to evaluate test reliability, describe item-level characteristics, identify local item dependence, and test for differential functioning by gender. 236 patients were included for analysis, with mean age 58 and approximately half female. Factor analysis failed to identify the lifestyle, coping, depression, and embarrassment domains, suggesting lack of construct validity. Items demonstrated low difficulty, indicating that the test has the highest reliability among individuals who have low quality of life. Five items are suggested for removal or replacement. Differential test functioning was minimal. This study has identified specific improvements that can be made to each domain of the Fecal Incontinence Quality of Life Scale and to the instrument overall. Formatting, scoring, and instructions may be simplified, and items with higher difficulty developed. The lifestyle domain can be used as is. The embarrassment domain should be significantly revised before use.
Psychometric properties of the Albanian version of the Orofacial Esthetic Scale: OES-ALB.
Bimbashi, Venera; Čelebić, Asja; Staka, Gloria; Hoxha, Flurije; Peršić, Sanja; Petričević, Nikola
2015-08-26
The aim was to adapt the Orofacial Esthetic Scale (OES) and to test psychometric properties of the Albanian language version in the cultural environment of the Republic of Kosovo. The OES questionnaire was translated from the original English version according to the accepted techniques. The reliability (internal consistency), and validity (construct, convergent and discriminative) were tested in 169 subjects, test-retest in 61 dental students (DS), and responsiveness in 51 prosthodontic patients with treatment needs (PPTN). The corrected item correlation coefficients of OES-ALB ranged from 0.686 to 0.909. The inter-item correlation coefficient ranged between 0.572 and 0.919. The Cronbach's alpha was 0.961 and IIC 0.758. Test- retest was confirmed by good ICCs and by no significant differences of the OES scores through the period of 14 days without any orofacial changes (p > 0.05). Construct validity was proved by the presence of one-factor composition that assumed 79.079% of the variance. Convergent validity showed significant correlation between one general question about satisfaction with orofacial esthetics and the OES summary score, as well as between the sum of the 3 OHIP-ALB49 questions related to orofacial aesthetics and the OES summary score. Discriminative validity was confirmed with statistically significant differences between DS, prosthodontic patients without treatment need and PPTN (p < 0.01). Responsiveness was confirmed by a significant increase of OES scores after PPTN patients received new fixed partial or removable dentures (P < 0.001). The results proved excellent psychometric properties of the OES-ALB questionnaire in the Republic of Kosovo.
Alhajj, Mohammed Nasser; Amran, Abdullah Ghalib; Halboub, Esam; Al-Basmi, Abdulghani Ali; Al-Ghabri, Fawaz Abdullah
2017-07-01
This study aimed at developing the Arabic version of the Orofacial Esthetic Scale (OES-Ar) and to investigate its psychometric properties among Arabic-speaking population with and without esthetic impairments. Translation and cross-cultural adaptation was done according to the standard guidelines. Internal consistency was assessed on 230 participants. For test-retest reliability, 50 subjects with natural teeth were recalled within a period of 2 weeks. Validity of the OES-Ar was tested by construct, convergent, and discriminant validity tests. Responsiveness to esthetic changes was assessed in 60 patients. The results showed excellent internal consistency with Cronbach's alpha value of 0.92 and inter-item correlation average value of 0.60. The ICC values ranged from 0.87 to 0.96 which indicated excellent agreement. Construct validity of the OES-Ar was confirmed to be one-factor structure (one-dimensional). For convergent validity, a significant correlation was found between OES summary score and overall impression of the orofacial esthetic as well as between OES summary score and the summary score of the three questions of the OHIP-49Ar related to esthetic. The discriminant validity test revealed significant differences between different study groups (P<0.001). Responsiveness to treatment was confirmed by significant differences between pre- and post-treatment OES total summary score (P<0.001). The OES-Ar has excellent psychometric properties making it valuable instrument to assess orofacial esthetics in Arabic-speaking patients. Copyright © 2016 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.
On the Performance of the Marginal Homogeneity Test to Detect Rater Drift.
Sgammato, Adrienne; Donoghue, John R
2018-06-01
When constructed response items are administered repeatedly, "trend scoring" can be used to test for rater drift. In trend scoring, raters rescore responses from the previous administration. Two simulation studies evaluated the utility of Stuart's Q measure of marginal homogeneity as a way of evaluating rater drift when monitoring trend scoring. In the first study, data were generated based on trend scoring tables obtained from an operational assessment. The second study tightly controlled table margins to disentangle certain features present in the empirical data. In addition to Q , the paired t test was included as a comparison, because of its widespread use in monitoring trend scoring. Sample size, number of score categories, interrater agreement, and symmetry/asymmetry of the margins were manipulated. For identical margins, both statistics had good Type I error control. For a unidirectional shift in margins, both statistics had good power. As expected, when shifts in the margins were balanced across categories, the t test had little power. Q demonstrated good power for all conditions and identified almost all items identified by the t test. Q shows substantial promise for monitoring of trend scoring.
The Molecular and Cellular Basis of Taste Coding in the Legs of Drosophila
Ling, Frederick; Dahanukar, Anupama; Weiss, Linnea A.; Kwon, Jae Young
2014-01-01
To understand the principles of taste coding, it is necessary to understand the functional organization of the taste organs. Although the labellum of the Drosophila melanogaster head has been described in detail, the tarsal segments of the legs, which collectively contain more taste sensilla than the labellum, have received much less attention. We performed a systematic anatomical, physiological, and molecular analysis of the tarsal sensilla of Drosophila. We construct an anatomical map of all five tarsal segments of each female leg. The taste sensilla of the female foreleg are systematically tested with a panel of 40 diverse compounds, yielding a response matrix of ∼500 sensillum–tastant combinations. Six types of sensilla are characterized. One type was tuned remarkably broadly: it responded to 19 of 27 bitter compounds tested, as well as sugars; another type responded to neither. The midleg is similar but distinct from the foreleg. The response specificities of the tarsal sensilla differ from those of the labellum, as do n-dimensional taste spaces constructed for each organ, enhancing the capacity of the fly to encode and respond to gustatory information. We examined the expression patterns of all 68 gustatory receptors (Grs). A total of 28 Gr–GAL4 drivers are expressed in the legs. We constructed a receptor-to-sensillum map of the legs and a receptor-to-neuron map. Fourteen Gr–GAL4 drivers are expressed uniquely in the bitter-sensing neuron of the sensillum that is tuned exceptionally broadly. Integration of the molecular and physiological maps provides insight into the underlying basis of taste coding. PMID:24849350
A Novel, Poly-Etalon, Fabry-Perot for Planetary Research
NASA Technical Reports Server (NTRS)
Kerr, Robert B.; Doe, Richard; Noto, John
1997-01-01
In an effort to develop a mechanically robust, high throughput and solid state spectrometer several liquid crystal Fabry-Perot etalons were constructed. The etalons were tested for spectral response, radiation resistance and optical transmission. The first year of this project was spent developing and understanding the properties of the liquid crystal etalons; in the second year an intensified all-sky imaging system was developed around a pair of LC etalons. The imaging system, developed jointly with SRI International represents a unique brassboard to demonstrate the use of LC etalons as tunable filters. The first set of etalons constructed in year one of this project were tested for spectral response and throughput while etalon surrogates were exposed to proton radiation simulating the exposure of an object in Low Earth Orbit (LEO). The 2" diameter etalons had a measure finesse of approximately 10 and were tunable over five orders. Liquid crystals exposed to proton irradiation showed no signs of damage. In year two two larger diameter (3") etalons were constructed with gaps of 3 and 5 microns. This pair of etalons is for use in a high resolution, all-sky spectral imager. The WATUMI imager system follows the heritage of all sky, narrow band, intensified imagers however it includes two LC Fabry-Perot etalons to provide tunability and the ability to switch wavelengths rapidly, an import consideration in auroral airglow imaging. This work also resulted in two publications and one poster presentation. The instrument will be uniquely capable, with superior throughput and speed, to measure optical airglow of multiple emission lines in harsh conditions.
Methods and Models for the Construction of Weakly Parallel Tests. Research Report 90-4.
ERIC Educational Resources Information Center
Adema, Jos J.
Methods are proposed for the construction of weakly parallel tests, that is, tests with the same test information function. A mathematical programing model for constructing tests with a prespecified test information function and a heuristic for assigning items to tests such that their information functions are equal play an important role in the…
Some Remarks on Foundation Pile Testing Procedures
NASA Astrophysics Data System (ADS)
Rybak, Jarosław
2017-10-01
This work presents the review of pile capacity testing techniques. In an overview, the key points in pile designing are: determination of the appropriate computational schemes, reliable data on loads and the properties of structural materials (in particular, of the soil mass, which is marked by the greatest variability). The procedure of constructing a pile foundation should include: carrying out soil tests in the scope that ensures safe designing, selecting a piling technology that is relevant both to geotechnical conditions and expected loads, drafting a piling design together with the design of load tests, setting up a testing station for further load tests, static and/or dynamic tests of pile load capacity, preceded by supplementary soil tests when the conditions of test pile installation fail to comply with the design assumptions or when the pile length exceeds the depth of the previously investigated soil, making documentation of load capacity tests (with an additional correction of the piling design), the actual piling (ongoing analysis of pile driving logs and, if necessary, testing the piles’ integrity), drawing up the as-built documentation. Unfortunately, the design is corrected after the load test have been conducted only if the piles fail to show the designed bearing capacity. The designer is then obliged to revise the design assumptions on the basis of tests results. If the test results account for the a greater bearing capacity than necessary and it would be recommendable to limit the extent of the planned (i.e. set out in the contract) piling works, usually neither the contractor nor the designer, nor even the Construction Site Supervisor, acting for the benefit of the Investor, are willing to take on the responsibility for reducing the scope of the piling works. The necessity of conducting additional control tests before and during the implementation of the construction project is often treated by the investors as an attempt at extorting extra financial resources or at delaying the project implementation. The designer, however, has no other possibility (and often - he/she does not have required qualifications) to verify the obtained test results.
30 CFR 7.67 - Construction test.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Construction test. 7.67 Section 7.67 Mineral... MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY Multiple-Shot Blasting Units § 7.67 Construction test. The constuction test is to be performed on the blasting unit subsequent to the output energy test of...
30 CFR 7.67 - Construction test.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Construction test. 7.67 Section 7.67 Mineral... MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY Multiple-Shot Blasting Units § 7.67 Construction test. The constuction test is to be performed on the blasting unit subsequent to the output energy test of...
30 CFR 7.67 - Construction test.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Construction test. 7.67 Section 7.67 Mineral... MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY Multiple-Shot Blasting Units § 7.67 Construction test. The constuction test is to be performed on the blasting unit subsequent to the output energy test of...
Some Considerations in Maintaining Adaptive Test Item Pools.
ERIC Educational Resources Information Center
Stocking, Martha L.
The construction of parallel editions of conventional tests for purposes of test security while maintaining score comparability has always been a recognized and difficult problem in psychometrics and test construction. The introduction of new modes of test construction, e.g., adaptive testing, changes the nature of the problem, but does not make…
Zheng, Li; Pang, Wei; Qi, Zanmei; Luo, Enjie; Cui, Liwang; Cao, Yaming
2016-08-08
Transmission-blocking vaccine (TBV) is a promising strategy for interrupting the malaria transmission cycle. Current TBV candidates include both pre- and post-fertilization antigens expressed during sexual development of the malaria parasites. We tested whether a TBV design combining two sexual-stage antigens has better transmission-blocking activity. Using the rodent malaria model Plasmodium yoelii, we pursued a DNA vaccination strategy with genes encoding the gametocyte antigen Pys48/45 and the major ookinete surface protein Pys25. Immunization of mice with DNA constructs expression either Pys48/45 or Pys25 elicited strong antibody responses, which specifically recognized a ~45 and ~25 kDa protein from gametocyte and ookinete lysates, respectively. Immune sera from mice immunized with DNA constructs expressing Pys48/45 and Pys25 individually and in combination displayed evident transmission-blocking activity in in vitro ookinete culture and direct mosquito feeding experiments. With both assays, the Pys25 sera had higher transmission-blocking activity than the Pys48/45 sera. Intriguingly, compared with the immunization with the individual DNA vaccines, immunization with both DNA constructs produced lower antibody responses against individual antigens. The resultant immune sera from the composite vaccination had significantly lower transmission-blocking activity than those from Pys25 DNA immunization group, albeit the activity was substantially higher than that from the Pys48 DNA vaccination group. This result suggested that vaccination with the two DNA constructs did not achieve a synergistic effect, but rather caused interference in inducing antigen-specific antibody responses. This result has important implications for future design of composite vaccines targeting different sexual antigens.
Kane, Michael J; Meier, Matt E; Smeekens, Bridget A; Gross, Georgina M; Chun, Charlotte A; Silvia, Paul J; Kwapil, Thomas R
2016-08-01
A large correlational study took a latent-variable approach to the generality of executive control by testing the individual-differences structure of executive-attention capabilities and assessing their prediction of schizotypy, a multidimensional construct (with negative, positive, disorganized, and paranoid factors) conveying risk for schizophrenia. Although schizophrenia is convincingly linked to executive deficits, the schizotypy literature is equivocal. Subjects completed tasks of working memory capacity (WMC), attention restraint (inhibiting prepotent responses), and attention constraint (focusing visual attention amid distractors), the latter 2 in an effort to fractionate the "inhibition" construct. We also assessed mind-wandering propensity (via in-task thought probes) and coefficient of variation in response times (RT CoV) from several tasks as more novel indices of executive attention. WMC, attention restraint, attention constraint, mind wandering, and RT CoV were correlated but separable constructs, indicating some distinctions among "attention control" abilities; WMC correlated more strongly with attentional restraint than constraint, and mind wandering correlated more strongly with attentional restraint, attentional constraint, and RT CoV than with WMC. Across structural models, no executive construct predicted negative schizotypy and only mind wandering and RT CoV consistently (but modestly) predicted positive, disorganized, and paranoid schizotypy; stalwart executive constructs in the schizophrenia literature-WMC and attention restraint-showed little to no predictive power, beyond restraint's prediction of paranoia. Either executive deficits are consequences rather than risk factors for schizophrenia, or executive failures barely precede or precipitate diagnosable schizophrenia symptoms. (PsycINFO Database Record (c) 2016 APA, all rights reserved).
Bush, Shane S; Sweet, Jerry J; Bianchini, Kevin J; Johnson-Greene, Doug; Dean, Pamela M; Schoenberg, Mike R
2018-04-01
Neuropsychological tests undergo periodic revision intended to improve psychometric properties, normative data, relevance of stimuli, and ease of administration. In addition, new tests are developed to evaluate psychological and neuropsychological constructs, often purporting to improve evaluation effectiveness. However, there is limited professional guidance to neuropsychologists concerning the decision to adopt a revised version of a test and/or replace an older test with a new test purporting to measure the same or overlapping constructs. This paper describes ethical and professional issues related to the selection and use of older versus newer psychological and neuropsychological tests, with the goal of promoting appropriate test selection and evidence-based decision making. Ethical and professional issues were reviewed and considered. The availability of a newer version of a test does not necessarily render obsolete prior versions of the test for purposes that are empirically supported, nor should continued empirically supported use of a prior version of a test be considered unethical practice. Until a revised or new test has published evidence of improved ability to help clinicians to make diagnostic determinations, facilitate treatment, and/or assess change over time, the choice to delay adoption of revised or new tests may be viewed as reasonable and appropriate. Recommendations are offered to facilitate decisions about the adoption of revised and new tests. Ultimately, it is the responsibility of individual neuropsychologists to determine which tests best meet their patients' needs, and to be able to support their decisions with empirical evidence and sound clinical judgment.
Agwale, Simon M.; Forbi, Joseph C.; Notka, Frank; Wrin, Terri; Wild, Jens; Wagner, Ralf; Wolf, Hans
2011-01-01
Creation of an effective vaccine for HIV has been an elusive goal of the scientific community for almost 30 years. Neutralizing antibodies are assumed to be pivotal to the success of a prophylactic vaccine but previous attempts to make an immunogen capable of generating neutralizing antibodies to primary “street strain” isolates have resulted in responses of very limited breadth and potency. The objective of the study was to determine the breadth and strength of neutralizing antibodies against autologous and heterologous primary isolates in a cohort of HIV-1 infected Nigerians and to characterize envelopes from subjects with particularly broad or strong immune responses for possible use as vaccine candidates in regions predominated by HIV-1 CRF02_AG and G subtypes. Envelope vectors from a panel of primary Nigerian isolates were constructed and tested with plasma/sera from the same cohort using the PhenoSense HIV neutralizing antibody assay (Monogram Biosciences Inc, USA) to assess the breadth and potency of neutralizing antibodies. The immediate goal of this study was realized by the recognition of three broadly cross-neutralizing sera: (NG2-clade CRF02_AG, NG3-clade CRF02_AG and NG9- clade G). Based on these findings, envelope gp140 sequences from NG2 and NG9, complemented with a gag sequence (Clade G) and consensus tat (CRF02_AG and G) antigens have been codon-optimized, synthesized, cloned and evaluated in BALB/c mice. The intramuscular administration of these plasmid DNA constructs, followed by two booster DNA immunizations, induced substantial specific humoral response against all constructs and strong cellular responses against the gag and tat constructs. These preclinical findings provide a framework for the design of candidate vaccine for use in regions where the HIV-1 epidemic is driven by clades CRF02_AG and G. PMID:21829720
Agwale, Simon M; Forbi, Joseph C; Notka, Frank; Wrin, Terri; Wild, Jens; Wagner, Ralf; Wolf, Hans
2011-01-01
Creation of an effective vaccine for HIV has been an elusive goal of the scientific community for almost 30 years. Neutralizing antibodies are assumed to be pivotal to the success of a prophylactic vaccine but previous attempts to make an immunogen capable of generating neutralizing antibodies to primary "street strain" isolates have resulted in responses of very limited breadth and potency. The objective of the study was to determine the breadth and strength of neutralizing antibodies against autologous and heterologous primary isolates in a cohort of HIV-1 infected Nigerians and to characterize envelopes from subjects with particularly broad or strong immune responses for possible use as vaccine candidates in regions predominated by HIV-1 CRF02_AG and G subtypes. Envelope vectors from a panel of primary Nigerian isolates were constructed and tested with plasma/sera from the same cohort using the PhenoSense HIV neutralizing antibody assay (Monogram Biosciences Inc, USA) to assess the breadth and potency of neutralizing antibodies. The immediate goal of this study was realized by the recognition of three broadly cross-neutralizing sera: (NG2-clade CRF02_AG, NG3-clade CRF02_AG and NG9- clade G). Based on these findings, envelope gp140 sequences from NG2 and NG9, complemented with a gag sequence (Clade G) and consensus tat (CRF02_AG and G) antigens have been codon-optimized, synthesized, cloned and evaluated in BALB/c mice. The intramuscular administration of these plasmid DNA constructs, followed by two booster DNA immunizations, induced substantial specific humoral response against all constructs and strong cellular responses against the gag and tat constructs. These preclinical findings provide a framework for the design of candidate vaccine for use in regions where the HIV-1 epidemic is driven by clades CRF02_AG and G.
Using hazard functions to assess changes in processing capacity in an attentional cuing paradigm.
Wenger, Michael J; Gibson, Bradley S
2004-08-01
Processing capacity--defined as the relative ability to perform mental work in a unit of time--is a critical construct in cognitive psychology and is central to theories of visual attention. The unambiguous use of the construct, experimentally and theoretically, has been hindered by both conceptual confusions and the use of measures that are at best only coarsely mapped to the construct. However, more than 25 years ago, J. T. Townsend and F. G. Ashby (1978) suggested that the hazard function on the response time (RT) distribution offered a number of conceptual advantages as a measure of capacity. The present study suggests that a set of statistical techniques, well-known outside the cognitive and perceptual literatures, offers the ability to perform hypothesis tests on RT-distribution hazard functions. These techniques are introduced, and their use is illustrated in application to data from the contingent attentional capture paradigm.
Flood trends and river engineering on the Mississippi River system
Pinter, N.; Jemberie, A.A.; Remo, J.W.F.; Heine, R.A.; Ickes, B.S.
2008-01-01
Along >4000 km of the Mississippi River system, we document that climate, land-use change, and river engineering have contributed to statistically significant increases in flooding over the past 100-150 years. Trends were tested using a database of >8 million hydrological measurements. A geospatial database of historical engineering construction was used to quantify the response of flood levels to each unit of engineering infrastructure. Significant climate- and/or land use-driven increases in flow were detected, but the largest and most pervasive contributors to increased flooding on the Mississippi River system were wing dikes and related navigational structures, followed by progressive levee construction. In the area of the 2008 Upper Mississippi flood, for example, about 2 m of the flood crest is linked to navigational and flood-control engineering. Systemwide, large increases in flood levels were documented at locations and at times of wing-dike and levee construction. Copyright 2008 by the American Geophysical Union.
Short-term response of testate amoebae to wildfire
NASA Astrophysics Data System (ADS)
Qin, Yangmin
2016-04-01
Many peatlands are exposed to intermittent burning but the implications of this burning for microbial communities have been little studied. Here we consider the impacts of burning on the dominant protists of peatland ecosystems, the testate amoebae. To do this we use a 'natural experiment'; a peatland exposed to wildfire where fire-fighting activity left a combination of unburned and heavily burned areas in close proximity. We assessed the change in testate amoebae three days after the end of the fire. We find that burning led to a large change in assemblage composition, primarily noted by a shift from taxa with tests constructed of idiosomes to those constructed of xenosomes. The most likely explanation for this change is the direct destruction of idiosome tests by extreme heat. Although we did not differentiate live individuals from empty tests it is probable that the fire has led to significant change in the amoeba community. This change may have interesting implications for the structure of the microbial foodweb, for silica cycling and for palaeoecological reconstruction in burned peatlands. This is clearly a topic which deserves more research attention.
Wideband fiber optic communications link
NASA Astrophysics Data System (ADS)
Bray, J. R.
1984-12-01
This thesis examined the feasibility of upgrading a nine port fiber optic bundle telecommunications system to a single strand fiber optic system. Usable pieces of equipment were identified and new Light Emitting Diodes (LED), Photodetectors and single strand SMA styled fiber optic connectors were ordered. Background research was conducted in the area of fiber optic power launching, fiber losses, connector losses and efficiencies. A new modulation/demodulation circuit was designed and constructed using parts from unused equipment. A new front panel was constructed to house the components, switches and connectors. A 2-m piece of optical fiber was terminated with the new connectors and tested for connector loss, numeric aperture and attenuation. The new LED was characterized by its emission radiation pattern and the entire system was tested for functional operation, frequency response and bandwidth of operation. An operations manual was prepared to ensure proper use in the future. The result was a two piece, single strand, fiber optic communications systems fully TTL compatible, capable of transmitting digital signals from 80 Kbit/sec to 20 Mbit/sec. The system was tested in a half duplex mode using both baseband and carrier modulated signals.
Assessment of CFD-based Response Surface Model for Ares I Supersonic Ascent Aerodynamics
NASA Technical Reports Server (NTRS)
Hanke, Jeremy L.
2011-01-01
The Ascent Force and Moment Aerodynamic (AFMA) Databases (DBs) for the Ares I Crew Launch Vehicle (CLV) were typically based on wind tunnel (WT) data, with increments provided by computational fluid dynamics (CFD) simulations for aspects of the vehicle that could not be tested in the WT tests. During the Design Analysis Cycle 3 analysis for the outer mold line (OML) geometry designated A106, a major tunnel mishap delayed the WT test for supersonic Mach numbers (M) greater than 1.6 in the Unitary Plan Wind Tunnel at NASA Langley Research Center, and the test delay pushed the final delivery of the A106 AFMA DB back by several months. The aero team developed an interim database based entirely on the already completed CFD simulations to mitigate the impact of the delay. This CFD-based database used a response surface methodology based on radial basis functions to predict the aerodynamic coefficients for M > 1.6 based on only the CFD data from both WT and flight Reynolds number conditions. The aero team used extensive knowledge of the previous AFMA DB for the A103 OML to guide the development of the CFD-based A106 AFMA DB. This report details the development of the CFD-based A106 Supersonic AFMA DB, constructs a prediction of the database uncertainty using data available at the time of development, and assesses the overall quality of the CFD-based DB both qualitatively and quantitatively. This assessment confirms that a reasonable aerodynamic database can be constructed for launch vehicles at supersonic conditions using only CFD data if sufficient knowledge of the physics and expected behavior is available. This report also demonstrates the applicability of non-parametric response surface modeling using radial basis functions for development of aerodynamic databases that exhibit both linear and non-linear behavior throughout a large data space.
Cheng, Alice; Humayun, Aiza; Schwartz, Zvi
2016-01-01
Abstract The addition of porosity to the traditionally used solid titanium metal implants has been suggested to more closely mimic the natural mechanical properties of bone and increase osseointegration in dental and orthopedic implants. The objective of this study was to evaluate cellular response to three-dimensional (3D) porous Ti-6Al-4V constructs fabricated by additive manufacturing using laser sintering with low porosity (LP), medium porosity (MP), and high porosity (HP) with low resolution (LR) and high resolution (HR) based on a computed tomography scan of human trabecular bone. After surface processing, construct porosity ranged from 41.0% to 76.1%, but all possessed micro-/nanoscale surface roughness and similar surface chemistry containing mostly Ti, O, and C. Biological responses (osteoblast differentiation, maturation, and local factor production) by MG63 osteoblast-like cells and normal human osteoblasts favored 3D than two-dimensional (2D) solid constructs. First, MG63 cells were used to assess differences in cell response to 2D compared to LR and HR porous 3D constructs. MG63 cells were sensitive to porosity resolution and exhibited increased osteocalcin (OCN), vascular endothelial growth factor (VEGF), osteoprotegerin (OPG), and bone morphogenetic protein 2 (BMP2) on HR 3D constructs than on 2D and LR 3D constructs. MG63 cells also exhibited porosity-dependent responses on HR constructs, with up to a 6.9-fold increase in factor production on LP-HR and MP-HR constructs than on HP-HR constructs. NHOsts were then used to validate biological response on HR constructs. NHOsts exhibited decreased DNA content and alkaline phosphatase activity and up to a 2.9-fold increase in OCN, OPG, VEGF, BMP2, and BMP4 on 3D HR constructs than on 2D controls. These results indicate that osteoblasts prefer a 3D architecture than a 2D surface and that osteoblasts are sensitive to the resolution of trabecular detail and porosity parameters of laser-sintered 3D Ti-6Al-4V constructs. PMID:28804735
Cheng, Alice; Humayun, Aiza; Boyan, Barbara D; Schwartz, Zvi
2016-03-01
The addition of porosity to the traditionally used solid titanium metal implants has been suggested to more closely mimic the natural mechanical properties of bone and increase osseointegration in dental and orthopedic implants. The objective of this study was to evaluate cellular response to three-dimensional (3D) porous Ti-6Al-4V constructs fabricated by additive manufacturing using laser sintering with low porosity (LP), medium porosity (MP), and high porosity (HP) with low resolution (LR) and high resolution (HR) based on a computed tomography scan of human trabecular bone. After surface processing, construct porosity ranged from 41.0% to 76.1%, but all possessed micro-/nanoscale surface roughness and similar surface chemistry containing mostly Ti, O, and C. Biological responses (osteoblast differentiation, maturation, and local factor production) by MG63 osteoblast-like cells and normal human osteoblasts favored 3D than two-dimensional (2D) solid constructs. First, MG63 cells were used to assess differences in cell response to 2D compared to LR and HR porous 3D constructs. MG63 cells were sensitive to porosity resolution and exhibited increased osteocalcin (OCN), vascular endothelial growth factor (VEGF), osteoprotegerin (OPG), and bone morphogenetic protein 2 (BMP2) on HR 3D constructs than on 2D and LR 3D constructs. MG63 cells also exhibited porosity-dependent responses on HR constructs, with up to a 6.9-fold increase in factor production on LP-HR and MP-HR constructs than on HP-HR constructs. NHOsts were then used to validate biological response on HR constructs. NHOsts exhibited decreased DNA content and alkaline phosphatase activity and up to a 2.9-fold increase in OCN, OPG, VEGF, BMP2, and BMP4 on 3D HR constructs than on 2D controls. These results indicate that osteoblasts prefer a 3D architecture than a 2D surface and that osteoblasts are sensitive to the resolution of trabecular detail and porosity parameters of laser-sintered 3D Ti-6Al-4V constructs.
30 CFR 7.67 - Construction test.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Construction test. 7.67 Section 7.67 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY Multiple-Shot Blasting Units § 7.67 Construction test...
Powell, Rachael; Pattison, Helen M; Francis, Jill J
2016-01-01
Chlamydia is a common sexually transmitted infection that has potentially serious consequences unless detected and treated early. The health service in the UK offers clinic-based testing for chlamydia but uptake is low. Identifying the predictors of testing behaviours may inform interventions to increase uptake. Self-tests for chlamydia may facilitate testing and treatment in people who avoid clinic-based testing. Self-testing and being tested by a health care professional (HCP) involve two contrasting contexts that may influence testing behaviour. However, little is known about how predictors of behaviour differ as a function of context. In this study, theoretical models of behaviour were used to assess factors that may predict intention to test in two different contexts: self-testing and being tested by a HCP. Individuals searching for or reading about chlamydia testing online were recruited using Google Adwords. Participants completed an online questionnaire that addressed previous testing behaviour and measured constructs of the Theory of Planned Behaviour and Protection Motivation Theory, which propose a total of eight possible predictors of intention. The questionnaire was completed by 310 participants. Sufficient data for multiple regression were provided by 102 and 118 respondents for self-testing and testing by a HCP respectively. Intention to self-test was predicted by vulnerability and self-efficacy, with a trend-level effect for response efficacy. Intention to be tested by a HCP was predicted by vulnerability, attitude and subjective norm. Thus, intentions to carry out two testing behaviours with very similar goals can have different predictors depending on test context. We conclude that interventions to increase self-testing should be based on evidence specifically related to test context.
[Immune response induced by HIV DNA vaccine combined with recombinant adeno-associated virus].
Liu, Yan-zheng; Zhou, Ling; Wang, Qi; Ye, Shu-qing; Li, Hong-xia; Zeng, Yi
2004-09-01
HIV-1 DNA vaccine and recombinant adeno-associated virus (rAAV) expressing gagV3 gene of HIV-1 subtype B were constructed and BALB/c mice were immunized by vaccination regimen consisting of consecutive priming with DNA vaccine and boosting with rAAV vaccine; the CTL and antibody response were detected and compared with those induced by DNA vaccine or rAAV vaccine separately. HIV-1 subtype B gagV3 gene was inserted into the polyclonal site of plasmid pCI-neo, DNA vaccine pCI-gagV3 was thereby constructed; pCI-gagV3 was transfected into p815 cells, G-418-resistant cells were obtained through screening transfected cells with G418, the expression of HIV-1 antigen in G-418-resistant cells was detected by EIA; BALB/c mice were immunized with pCI-gagV3 and the immune response was tested; BALB/c mouse immunized with pCI-gagV3 and combined with rAAV expressing the same gagV3 genes were tested for antibody level in sera by EIA method and cytotoxicity response by LDH method. pCI-gagV3 could express HIV-1 gene in p815 cells; pCI-gagV3 could induce HIV-1 specific humoral and cell-mediated immune response in BALB/c mice. The HIV-1 specific antibody level was 1/20; when the ratio of effector cells: target cells was 50:1, the average specific cytotoxicity was 41.7%; there was no evident increase in the antibody level induced by pCI-gagV3 combined with rAAV, but there was increase in CTL response, the average specific cytotoxicity was 61.3% when effector cells: target cells ratio was 50:1. HIV-1 specific cytotoxicity in BALB/c mice can be increased by immunization of BALB/c mice with DNA vaccine combined with rAAV vaccine.
29 CFR 1926.1433 - Design, construction and testing.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 29 Labor 8 2013-07-01 2013-07-01 false Design, construction and testing. 1926.1433 Section 1926... Construction § 1926.1433 Design, construction and testing. The following requirements apply to equipment that... locomotive cranes manufactured prior to November 8, 2010 must meet the applicable requirements for design...
29 CFR 1926.1433 - Design, construction and testing.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 29 Labor 8 2014-07-01 2014-07-01 false Design, construction and testing. 1926.1433 Section 1926... Construction § 1926.1433 Design, construction and testing. The following requirements apply to equipment that... locomotive cranes manufactured prior to November 8, 2010 must meet the applicable requirements for design...
29 CFR 1926.1433 - Design, construction and testing.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 29 Labor 8 2011-07-01 2011-07-01 false Design, construction and testing. 1926.1433 Section 1926... Construction § 1926.1433 Design, construction and testing. The following requirements apply to equipment that... locomotive cranes manufactured prior to November 8, 2010 must meet the applicable requirements for design...
29 CFR 1926.1433 - Design, construction and testing.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 29 Labor 8 2012-07-01 2012-07-01 false Design, construction and testing. 1926.1433 Section 1926... Construction § 1926.1433 Design, construction and testing. The following requirements apply to equipment that... locomotive cranes manufactured prior to November 8, 2010 must meet the applicable requirements for design...
Item response theory - A first approach
NASA Astrophysics Data System (ADS)
Nunes, Sandra; Oliveira, Teresa; Oliveira, Amílcar
2017-07-01
The Item Response Theory (IRT) has become one of the most popular scoring frameworks for measurement data, frequently used in computerized adaptive testing, cognitively diagnostic assessment and test equating. According to Andrade et al. (2000), IRT can be defined as a set of mathematical models (Item Response Models - IRM) constructed to represent the probability of an individual giving the right answer to an item of a particular test. The number of Item Responsible Models available to measurement analysis has increased considerably in the last fifteen years due to increasing computer power and due to a demand for accuracy and more meaningful inferences grounded in complex data. The developments in modeling with Item Response Theory were related with developments in estimation theory, most remarkably Bayesian estimation with Markov chain Monte Carlo algorithms (Patz & Junker, 1999). The popularity of Item Response Theory has also implied numerous overviews in books and journals, and many connections between IRT and other statistical estimation procedures, such as factor analysis and structural equation modeling, have been made repeatedly (Van der Lindem & Hambleton, 1997). As stated before the Item Response Theory covers a variety of measurement models, ranging from basic one-dimensional models for dichotomously and polytomously scored items and their multidimensional analogues to models that incorporate information about cognitive sub-processes which influence the overall item response process. The aim of this work is to introduce the main concepts associated with one-dimensional models of Item Response Theory, to specify the logistic models with one, two and three parameters, to discuss some properties of these models and to present the main estimation procedures.
Hybrid Laser-Arc Welding Tanks Steels
NASA Astrophysics Data System (ADS)
Turichin, G.; Tsibulskiy, I.; Kuznetsov, M.; Akhmetov, A.; Klimova-Korsmik, O.
2016-04-01
The results investigate hybrid laser-arc welding of high strength steels using design responsible metallic construction and the highest strength body of vehicles. Welds from modern high strength steels grade Hardox 400, Hardox 450, Armox 600T and AB were created. High power fiber laser LS-15 with output 15 kW and arc rectifier VDU - 1500 DC were used in the experiment. Results of the metallographic research and mechanical tests are presented.
The Utrecht questionnaire (U-CEP) measuring knowledge on clinical epidemiology proved to be valid.
Kortekaas, Marlous F; Bartelink, Marie-Louise E L; de Groot, Esther; Korving, Helen; de Wit, Niek J; Grobbee, Diederick E; Hoes, Arno W
2017-02-01
Knowledge on clinical epidemiology is crucial to practice evidence-based medicine. We describe the development and validation of the Utrecht questionnaire on knowledge on Clinical epidemiology for Evidence-based Practice (U-CEP); an assessment tool to be used in the training of clinicians. The U-CEP was developed in two formats: two sets of 25 questions and a combined set of 50. The validation was performed among postgraduate general practice (GP) trainees, hospital trainees, GP supervisors, and experts. Internal consistency, internal reliability (item-total correlation), item discrimination index, item difficulty, content validity, construct validity, responsiveness, test-retest reliability, and feasibility were assessed. The questionnaire was externally validated. Internal consistency was good with a Cronbach alpha of 0.8. The median item-total correlation and mean item discrimination index were satisfactory. Both sets were perceived as relevant to clinical practice. Construct validity was good. Both sets were responsive but failed on test-retest reliability. One set took 24 minutes and the other 33 minutes to complete, on average. External GP trainees had comparable results. The U-CEP is a valid questionnaire to assess knowledge on clinical epidemiology, which is a prerequisite for practicing evidence-based medicine in daily clinical practice. Copyright © 2016 Elsevier Inc. All rights reserved.
Cappelleri, Joseph C; Jason Lundy, J; Hays, Ron D
2014-05-01
The US Food and Drug Administration's guidance for industry document on patient-reported outcomes (PRO) defines content validity as "the extent to which the instrument measures the concept of interest" (FDA, 2009, p. 12). According to Strauss and Smith (2009), construct validity "is now generally viewed as a unifying form of validity for psychological measurements, subsuming both content and criterion validity" (p. 7). Hence, both qualitative and quantitative information are essential in evaluating the validity of measures. We review classical test theory and item response theory (IRT) approaches to evaluating PRO measures, including frequency of responses to each category of the items in a multi-item scale, the distribution of scale scores, floor and ceiling effects, the relationship between item response options and the total score, and the extent to which hypothesized "difficulty" (severity) order of items is represented by observed responses. If a researcher has few qualitative data and wants to get preliminary information about the content validity of the instrument, then descriptive assessments using classical test theory should be the first step. As the sample size grows during subsequent stages of instrument development, confidence in the numerical estimates from Rasch and other IRT models (as well as those of classical test theory) would also grow. Classical test theory and IRT can be useful in providing a quantitative assessment of items and scales during the content-validity phase of PRO-measure development. Depending on the particular type of measure and the specific circumstances, the classical test theory and/or the IRT should be considered to help maximize the content validity of PRO measures. Copyright © 2014 Elsevier HS Journals, Inc. All rights reserved.
P-Them Response for Geologically Active and Non-Active Areas
NASA Astrophysics Data System (ADS)
Vetrov, A.
2011-12-01
Time Domain Electromagnetic air-borne systems are widely used in geological exploration for minerals associated with conductive rocks, underground water resources and geological underground mapping. The newly designed P-THEM system has been test-flown at the Reid Mahaffy geological test site in Northern Ontario, Canada; and then over an area near Newmarket, north of Toronto. While the flight in Reid Mahaffy was made to verify real characteristics of the system: stability and repeatability of results, the flight over the Newmarket area was made to verify correct operation of the EM system with a magnetometer and gamma-ray spectrometer. Interesting and significant response of the TDEM observations to geological, agricultural and engineering objects were observed during the test flights. These results demonstrate a possibility of TDEM method for mineral research and environmental tasks. The Reid Mahaffy Test Site is located in the Abitibi Subprovince, immediately east of the Mattagami River Fault in Ontario, Canada. The test site was created in 1999 by the Ontario Geological Survey, initially to enable various airborne geophysical systems to demonstrate their basic performance capabilities. The general geology of the site contains known overburden thickness based on almost 50 diamond drill holes, with geological logs available for these. The survey flights over Reid Mahaffy test site were performed in April 2010. The altitude and direction tests were flown on three lines over the test survey area. The response of early times represents overburden and correlates with its known thickness. The conductive body appears on later time channels and remains detectable over noise level. The electrical inversion of the results allows distinguishing a structure of several vertical conductor slices, forming the conductive body. The Newmarket area selected for tests in June 2010 is a highly developed urban zone in the Greater Toronto Area, Ontario, Canada. Geologically, the area is represented with Quadrennial sediments with underlying bedrocks of the Ordovician formation. The main area is represented with sand and gravel of Glacial lake, River and Moraine deposits. The main purpose of the test flights was to check the functional integration of the P-THEM system with a Magnetometer and Gamma-Ray Spectrometer system. The results indicated a very good agricultural response of the P-THEM system after the interpretation of the observed data. The salty soils along roads, where the salt is spread during winter time, the grounded industrial constructions and powerline towers can be observed on the mapped data (see image). The achieved results of the survey show the possibility of the TDEM airborne system for applications in characterization of environmental and engineering properties, such as detection of surface and near surface pollution, grounding of metal constructions and other, over large areas of interest.
Cross-cultural adaptation and validation of Persian Achilles tendon Total Rupture Score.
Ansari, Noureddin Nakhostin; Naghdi, Soofia; Hasanvand, Sahar; Fakhari, Zahra; Kordi, Ramin; Nilsson-Helander, Katarina
2016-04-01
To cross-culturally adapt the Achilles tendon Total Rupture Score (ATRS) to Persian language and to preliminary evaluate the reliability and validity of a Persian ATRS. A cross-sectional and prospective cohort study was conducted to translate and cross-culturally adapt the ATRS to Persian language (ATRS-Persian) following steps described in guidelines. Thirty patients with total Achilles tendon rupture and 30 healthy subjects participated in this study. Psychometric properties of floor/ceiling effects (responsiveness), internal consistency reliability, test-retest reliability, standard error of measurement (SEM), smallest detectable change (SDC), construct validity, and discriminant validity were tested. Factor analysis was performed to determine the ATRS-Persian structure. There were no floor or ceiling effects that indicate the content and responsiveness of ATRS-Persian. Internal consistency was high (Cronbach's α 0.95). Item-total correlations exceeded acceptable standard of 0.3 for the all items (0.58-0.95). The test-retest reliability was excellent [(ICC)agreement 0.98]. SEM and SDC were 3.57 and 9.9, respectively. Construct validity was supported by a significant correlation between the ATRS-Persian total score and the Persian Foot and Ankle Outcome Score (PFAOS) total score and PFAOS subscales (r = 0.55-0.83). The ATRS-Persian significantly discriminated between patients and healthy subjects. Explanatory factor analysis revealed 1 component. The ATRS was cross-culturally adapted to Persian and demonstrated to be a reliable and valid instrument to measure functional outcomes in Persian patients with Achilles tendon rupture. II.
The Effects of Item Format and Cognitive Domain on Students' Science Performance in TIMSS 2011
NASA Astrophysics Data System (ADS)
Liou, Pey-Yan; Bulut, Okan
2017-12-01
The purpose of this study was to examine eighth-grade students' science performance in terms of two test design components, item format, and cognitive domain. The portion of Taiwanese data came from the 2011 administration of the Trends in International Mathematics and Science Study (TIMSS), one of the major international large-scale assessments in science. The item difficulty analysis was initially applied to show the proportion of correct items. A regression-based cumulative link mixed modeling (CLMM) approach was further utilized to estimate the impact of item format, cognitive domain, and their interaction on the students' science scores. The results of the proportion-correct statistics showed that constructed-response items were more difficult than multiple-choice items, and that the reasoning cognitive domain items were more difficult compared to the items in the applying and knowing domains. In terms of the CLMM results, students tended to obtain higher scores when answering constructed-response items as well as items in the applying cognitive domain. When the two predictors and the interaction term were included together, the directions and magnitudes of the predictors on student science performance changed substantially. Plausible explanations for the complex nature of the effects of the two test-design predictors on student science performance are discussed. The results provide practical, empirical-based evidence for test developers, teachers, and stakeholders to be aware of the differential function of item format, cognitive domain, and their interaction in students' science performance.
Proof of concept and dose estimation with binary responses under model uncertainty.
Klingenberg, B
2009-01-30
This article suggests a unified framework for testing Proof of Concept (PoC) and estimating a target dose for the benefit of a more comprehensive, robust and powerful analysis in phase II or similar clinical trials. From a pre-specified set of candidate models, we choose the ones that best describe the observed dose-response. To decide which models, if any, significantly pick up a dose effect, we construct the permutation distribution of the minimum P-value over the candidate set. This allows us to find critical values and multiplicity adjusted P-values that control the familywise error rate of declaring any spurious effect in the candidate set as significant. Model averaging is then used to estimate a target dose. Popular single or multiple contrast tests for PoC, such as the Cochran-Armitage, Dunnett or Williams tests, are only optimal for specific dose-response shapes and do not provide target dose estimates with confidence limits. A thorough evaluation and comparison of our approach to these tests reveal that its power is as good or better in detecting a dose-response under various shapes with many more additional benefits: It incorporates model uncertainty in PoC decisions and target dose estimation, yields confidence intervals for target dose estimates and extends to more complicated data structures. We illustrate our method with the analysis of a Phase II clinical trial. Copyright (c) 2008 John Wiley & Sons, Ltd.
Mirkarimi, Kamal; Eri, Maryam; Ghanbari, Mohammad R; Kabir, Mohammad J; Raeisi, Mojtaba; Ozouni-Davaji, Rahman B; Aryaie, Mohammad; Charkazi, Abdurrahman
2017-10-30
We were guided by the Protection Motivation Theory to test the motivational interviewing effects on attitude and intention of obese and overweight women to do regular physical activity. In a randomized controlled trial, we selected using convenience sampling 60 overweight and obese women attending health centres. The women were allocated to 2 groups of 30 receiving a standard weight-control programme or motivational interviewing. All constructs of the theory (perceived susceptibility, severity, self-efficacy and response efficacy) and all anthropometric characteristics (except body mass index) were significantly different between the groups at 3 study times. The strongest predictors of intention to do regular physical exercise were perceived response efficacy and attitude at 2- and 6-months follow-up. We showed that targeting motivational interviewing with an emphasis on Protection Motivation Theory constructs appeared to be beneficial for designing and developing appropriate intervention to improve physical activity status among women with overweight and obesity.
Effect of water on the triaxial response under monotonic loading of asphalt concrete used in dams
NASA Astrophysics Data System (ADS)
Gaxiola Hernández, Alberto; Ossa López, Alexandra
2018-01-01
Embankment dams with asphalt concrete cores have been constructed on practically all continents with satisfactory results. Nowadays many advantages, such as the mechanical strength, are known that makes asphalt concrete a competitive alternative for the construction of the impervious elements of dams. However, the current available information does not describe the effect of prolonged contact between asphalt concrete and water on the structure of an embankment dam. In this research cylindrical asphalt concrete specimens with a void content similar to that used in impervious barriers of dams were fabricated and submerged in water for a prolonged period to simulate the conditions experienced by asphalt concrete placed inside an embankment dam as its core material. Subsequently, triaxial compression tests were conducted on the specimens. The results indicated that the asphalt concrete exhibited a reduction in strength because of the saturation process to which the material was subjected. However, no changes were observed in the mechanical response to prolonged contact with water for periods of up to 12 months.
Disentangling prototypicality and social desirability: the case of the KNOWI task.
Turan, Bulent
2011-01-01
The prototype of indicators of a relationship partner who can be trusted to be responsive at times of stress is one kind of social knowledge structure. The Knowledge of Indicators (KNOWI) Task assesses individual differences in knowledge about these prototypic indicators. In constructing the KNOWI, an iterative procedure was used in an attempt to identify those indicators for which ratings of prototypicality are not influenced by social desirability. Study 1 demonstrated that the correlation between ratings of prototypicality and social desirability is indeed eliminated for the final set of indicators retained in the KNOWI. Study 2 tested the prototype matching hypothesis: Comparing an actual partner to the prototype might shape global judgments about that partner's responsiveness. Because in Study 2 only those indicators that are uncorrelated with social desirability were used, this result cannot be explained by social desirability. These results support the construct validity of the indicators used in the KNOWI Task, which seems to be a precise assessment tool not influenced by social desirability.
Rubble masonry response under cyclic actions: The experience of L’Aquila city (Italy)
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fonti, Roberta, E-mail: roberta.fonti@tum.de; Barthel, Rainer, E-mail: r.barthel@lrz.tu-muenchen.de; Formisano, Antonio, E-mail: antoform@unina.it
2015-12-31
Several methods of analysis are available in engineering practice to study old masonry constructions. Two commonly used approaches in the field of seismic engineering are global and local analyses. Despite several years of research in this field, the various methodologies suffer from a lack of comprehensive experimental validation. This is mainly due to the difficulty in simulating the many different kinds of masonry and, accordingly, the non-linear response under horizontal actions. This issue can be addressed by examining the local response of isolated panels under monotonic and/or alternate actions. Different testing methodologies are commonly used to identify the local responsemore » of old masonry. These range from simplified pull-out tests to sophisticated in-plane monotonic tests. However, there is a lack of both knowledge and critical comparison between experimental validations and numerical simulations. This is mainly due to the difficulties in implementing irregular settings within both simplified and advanced numerical analyses. Similarly, the simulation of degradation effects within laboratory tests is difficult with respect to old masonry in-situ boundary conditions. Numerical models, particularly on rubble masonry, are commonly simplified. They are mainly based on a kinematic chain of rigid blocks able to perform different “modes of damage” of structures subjected to horizontal actions. This paper presents an innovative methodology for testing; its aim is to identify a simplified model for out-of-plane response of rubbleworks with respect to the experimental evidence. The case study of L’Aquila district is discussed.« less
DOT National Transportation Integrated Search
1975-01-01
Prior to 1932, road maintenance and construction in Virginia were largely the responsibility of the individual county governments. Bridge construction projects formed a natural part of these activities. Local responsibility resulted in a rich variety...
DOT National Transportation Integrated Search
1975-01-01
Prior to 1932, road maintenance and construction in Virginia were largely the responsibility of the individual county governments. Bridge construction projects formed a natural part of these activities. Local responsibility resulted in a rich variety...
Some applications of categorical data analysis to epidemiological studies.
Grizzle, J E; Koch, G G
1979-01-01
Several examples of categorized data from epidemiological studies are analyzed to illustrate that more informative analysis than tests of independence can be performed by fitting models. All of the analyses fit into a unified conceptual framework that can be performed by weighted least squares. The methods presented show how to calculate point estimate of parameters, asymptotic variances, and asymptotically valid chi 2 tests. The examples presented are analysis of relative risks estimated from several 2 x 2 tables, analysis of selected features of life tables, construction of synthetic life tables from cross-sectional studies, and analysis of dose-response curves. PMID:540590
NASA Technical Reports Server (NTRS)
Koenig, John C.; Billitti, Joseph W.; Tallon, John M.
1979-01-01
Quality assurance criteria are described for manufacturers and installers of solar photovoltaic tests and applications. Quality oriented activities are outlined to be pursued by the contractor/subcontractor to assure the physical and operational quality of equipment produced is included. In the broad sense, guidelines are provided for establishing a QA organization if none exists. Mainly, criteria is provided to be considered in any PV quality assurance plan selected as appropriate by the responsible Field Center. A framework is established for a systematic approach to ensure that photovoltaic tests and applications are constructed in a timely and cost effective manner.
Growian rotor blades: Production development, construction and test
NASA Technical Reports Server (NTRS)
Thiele, H. M.
1984-01-01
Development and construction of three 50 m rotor blades for a 3 MW wind turbine are described. A hybrid concept was chosen, i.e., a load carrying inflexible steel spar and a glass fiber reinforced plastic skin. A test blade was constructed and static loading tests, dynamic vibration tests and fatigue tests on critical welds as well as at the connection between spar and blade skin were performed. All test results show good accordance with calculated values, and were taken into consideration during the construction of two rotor blades.
Merolla, Giovanni; Corona, Katia; Zanoli, Gustavo; Cerciello, Simone; Giannotti, Stefano; Porcellini, Giuseppe
2017-12-01
The Kerlan-Jobe Orthopaedic Clinic (KJOC) Shoulder and Elbow score is a reliable and sensitive tool to measure the performance of overhead athletes. The purpose of this study was to carry out a cross-cultural adaptation and validation of the KJOC questionnaire in Italian and to assess its reliability, validity, and responsiveness. Ninety professional athletes with a painful shoulder were included in this study and were assigned to the "injury group" (n = 32) or the "overuse group" (n = 58); 65 were managed conservatively and 25 were treated by arthroscopic surgery. To assess the reliability of the KJOC score, patients were asked to fill in the questionnaire at baseline and after 2 weeks. To test the construct validity, KJOC scores were compared to those obtained with the Italian version of the Disabilities of the Arm, Shoulder, and Hand (DASH) scale, and with the DASH sports/performing arts module. To test KJOC score responsiveness, the follow-up KJOC scores of the participants treated conservatively were compared to those of the patients treated by arthroscopic surgery. Statistical analysis demonstrated that the KJOC questionnaire is reliable in terms of the single items and the overall score (ICC 0.95-0.99); that it has high construct validity (r s = -0.697; p < 0.01); and that it is responsive to clinical differences in shoulder function (p < 0.0001). The Italian version of the KJOC Shoulder and Elbow score performed in a similar way to the English version and demonstrated good validity, reliability, and responsiveness after conservative and surgical treatment. II.
Lohse, Barbara; Satter, Ellyn; Arnold, Kristen
2014-04-01
Accurate early assessment and targeted intervention with problematic parent/child feeding dynamics is critical for the prevention and treatment of child obesity. The division of responsibility in feeding (sDOR), articulated by the Satter Feeding Dynamics Model (fdSatter), has been demonstrated clinically as an effective approach to reduce child feeding problems, including those leading to obesity. Lack of a tested instrument to examine adherence to fdSatter stimulated initial construction of the Satter Feeding Dynamics Inventory (fdSI). The aim of this project was to refine the item pool to establish translational validity, making the fdSI suitable for advanced psychometric analysis. Cognitive interviews (n = 80) with caregivers of varied socioeconomic strata informed revisions that demonstrated face and content validity. fdSI responses were mapped to interviews using an iterative, multi-phase thematic approach to provide an instrument ready for construct validation. fdSI development required five interview phases over 32 months: Foundational; Refinement; Transitional; Assurance; and Launching. Each phase was associated with item reduction and revision. Thirteen items were removed from the 38-item Foundational phase and seven were revised in the Refinement phase. Revisions, deletions, and additions prompted by Transitional and Assurance phase interviews resulted in the 15-item Launching phase fdSI. Only one Foundational phase item was carried through all development phases, emphasizing the need to test for item comprehension and interpretation before psychometric analyses. Psychometric studies of item pools without encrypted meanings will facilitate progress toward a tool that accurately detects adherence to sDOR. Ability to measure sDOR will facilitate focus on feeding behaviors associated with reduced risk of childhood obesity.
Dueñas, María; Mendonça, Liliane; Sampaio, Rute; Gouvinhas, Cláudia; Oliveira, Daniela; Castro-Lopes, José Manuel; Azevedo, Luís Filipe
2017-03-01
The Bowel Function Index (BFI) is a simple and sound bowel function and opioid-induced constipation (OIC) screening tool. We aimed to develop the translation and cultural adaptation of this measure (BFI-P) and to assess its reliability and validity for the Portuguese language and a chronic pain population. The BFI-P was created after a process including translation, back translation and cultural adaptation. Participants (n = 226) were recruited in a chronic pain clinic and were assessed at baseline and after one week. Internal consistency, test-retest reliability, responsiveness, construct (convergent and known groups) and factorial validity were assessed. Test-retest reliability had an intra-class correlation of 0.605 for BFI mean score. Internal consistency of BFI had Cronbach's alpha of 0.865. The construct validity of BFI-P was shown to be excellent and the exploratory factor analysis confirmed its unidimensional structure. The responsiveness of BFI-P was excellent, with a suggested 17-19 point and 8-12 point change in score constituting a clinically relevant change in constipation for patients with and without previous constipation, respectively. This study had some limitations, namely, the criterion validity of BFI-P was not directly assessed; and the absence of a direct criterion for OIC precluded the assessment of the criterion based responsiveness of BFI-P. Nevertheless, BFI may importantly contribute to better OIC screening and its Portuguese version (BFI-P) has been shown to have excellent reliability, internal consistency, validity and responsiveness. Further suggestions regarding statistically and clinically important change cut-offs for this instrument are presented.
Validation of the Mayo Hip Score: construct validity, reliability and responsiveness to change.
Singh, Jasvinder A; Schleck, Cathy; Harmsen, W Scott; Lewallen, David G
2016-01-19
Previous studies have provided the initial evidence for construct validity and test-retest reliability of the Mayo Hip Score. Instruments used for Total Hip Arthroplasty (THA) outcomes assessment should be valid, reliable and responsive to change. Our main objective was to examine the responsiveness to change, association with subsequent revision and the construct validity of the Mayo hip score. Discriminant ability was assessed by calculating effect size (ES), standardized response mean (SRM) and Guyatt's responsiveness index (GRI). Minimal clinically important difference (MCII) and moderate improvement thresholds were calculated. We assessed construct validity by examining association of scores with preoperative patient characteristics and correlation with Harris hip score, and assessed association of scores with the risk of subsequent revision. Five thousand three hundred seven provided baseline data; of those with baseline data, 2,278 and 2,089 (39%) provided 2- and 5-year data, respectively. Large ES, SRM and GRI ranging 2.66-2.78, 2.42-2.61 and 1.67-1.88 were noted for Mayo hip scores with THA, respectively. The MCII and moderate improvement thresholds were 22.4-22.7 and 39.4-40.5 respectively. Hazard ratios of revision surgery were higher with lower final score or less improvement in Mayo hip score at 2-years and borderline significant/non-significant at 5-years, respectively: (1) score ≤55 with hazard ratios of 2.24 (95% CI, 1.45, 3.46; p = 0.0003) and 1.70 (95% CI, 1.00, 2.92; p = 0.05) of implant revision subsequently, compared to 72-80 points; (2) no improvement or worsening score with hazard ratios 3.94 (95% CI, 1.50, 10.30; p = 0.005) and 2.72 (95% CI, 0.85,8.70; p = 0.09), compared to improvement >50-points. Mayo hip score had significant positive correlation with younger age, male gender, lower BMI, lower ASA class and lower Deyo-Charlson index (p ≤ 0.003 for each) and with Harris hip scores (p < 0.001). Mayo Hip Score is valid, sensitive to change and associated with future risk of revision surgery in patients with primary THA.
46 CFR 161.010-2 - Design, construction, and test requirements.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 46 Shipping 6 2013-10-01 2013-10-01 false Design, construction, and test requirements. 161.010-2 Section 161.010-2 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL ELECTRICAL EQUIPMENT Floating Electric Waterlight § 161.010-2 Design, construction, and test...
46 CFR 161.010-2 - Design, construction, and test requirements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 6 2010-10-01 2010-10-01 false Design, construction, and test requirements. 161.010-2 Section 161.010-2 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL ELECTRICAL EQUIPMENT Floating Electric Waterlight § 161.010-2 Design, construction, and test...
46 CFR 161.010-2 - Design, construction, and test requirements.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 6 2014-10-01 2014-10-01 false Design, construction, and test requirements. 161.010-2 Section 161.010-2 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL ELECTRICAL EQUIPMENT Floating Electric Waterlight § 161.010-2 Design, construction, and test...
46 CFR 161.010-2 - Design, construction, and test requirements.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 6 2011-10-01 2011-10-01 false Design, construction, and test requirements. 161.010-2 Section 161.010-2 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL ELECTRICAL EQUIPMENT Floating Electric Waterlight § 161.010-2 Design, construction, and test...
Construct Validity of Neuropsychological Tests in Schizophrenia.
ERIC Educational Resources Information Center
Allen, Daniel N.; Aldarondo, Felito; Goldstein, Gerald; Huegel, Stephen G.; Gilbertson, Mark; van Kammen, Daniel P.
1998-01-01
The construct validity of neuropsychological tests in patients with schizophrenia was studied with 39 patients who were evaluated with a battery of six tests assessing attention, memory, and abstract reasoning abilities. Results support the construct validity of the neuropsychological tests in patients with schizophrenia. (SLD)
Edelen, J. P.; Edelen, A. L.; Bowring, D.; ...
2016-12-23
In this study we develop an a priori method for simulating dynamic resonant frequency and temperature responses in a radio frequency quadrupole (RFQ) and its associated water-based cooling system respectively. Our model provides a computationally efficient means to evaluate the transient response of the RFQ over a large range of system parameters. The model was constructed prior to the delivery of the PIP-II Injector Test RFQ and was used to aid in the design of the water-based cooling system, data acquisition system, and resonance control system. Now that the model has been validated with experimental data, it can confidently bemore » used to aid in the design of future RFQ resonance controllers and their associated water-based cooling systems. Finally, without any empirical fitting, it has demonstrated the ability to predict absolute temperature and frequency changes to 11% accuracy on average, and relative changes to 7% accuracy.« less
Reflective-impulsive style and conceptual tempo in a gross motor task.
Keller, J; Ripoll, H
2001-06-01
The reflective-impulsive construct refers to responses made slowly or quickly in a situation with high uncertainty. Children who are labeled "reflective" take a longer time to respond and make few errors, whereas "impulsive" children are fast and inaccurate. Although the validity of the test and the definition of reflective-impulsive style are well accepted, whether such respond fast or slow to all tasks is questioned. Some children do not fit the dichotomy. Two other groups arise, the fast-accurate and the slow-inaccurate. The response styles of 86 boys, ages 5, 7, and 9 years performing a gross motor task, i.e., hitting a ball with a racquet, were studied. Analysis indicated that the slowest children on the Matching Familiar Figures Test can be faster than the fastest ones and remain more accurate. As the definition of the reflective-impulsive style is based on time, the reflective ones might better be viewed as children who can adapt the response time to the context and thus be more efficient at problem-solving.
Kinematic responses and injuries of pedestrian in car-pedestrian collisions
NASA Astrophysics Data System (ADS)
Teng, T. L.; Liang, C. C.; Hsu, C. Y.; Tai, S. F.
2017-10-01
How to protect pedestrians and reduce the collision injury has gradually become the new field of automotive safety research and focus in the world. Many engineering studies have appeared and their purpose is trying to reduce the pedestrian injuries caused by traffic accident. The physical model involving impactor model and full scale pedestrian model are costly when taking the impact test. This study constructs a vehicle-pedestrian collision model by using the MADYMO. To verify the accuracy of the proposed vehicle-pedestrian collision model, the experimental data are used in the pedestrian model test. The proposed model also will be applied to analyze the kinematic responses and injuries of pedestrian in collisions in this study. The modeled results can help assess the pedestrian friendliness of vehicles and assist in the future development of pedestrian friendliness vehicle technologies.
Structural response of existing spatial truss roof construction based on Cosserat rod theory
NASA Astrophysics Data System (ADS)
Miśkiewicz, Mikołaj
2018-04-01
Paper presents the application of the Cosserat rod theory and newly developed associated finite elements code as the tools that support in the expert-designing engineering practice. Mechanical principles of the 3D spatially curved rods, dynamics (statics) laws, principle of virtual work are discussed. Corresponding FEM approach with interpolation and accumulation techniques of state variables are shown that enable the formulation of the C0 Lagrangian rod elements with 6-degrees of freedom per node. Two test examples are shown proving the correctness and suitability of the proposed formulation. Next, the developed FEM code is applied to assess the structural response of the spatial truss roof of the "Olivia" Sports Arena Gdansk, Poland. The numerical results are compared with load test results. It is shown that the proposed FEM approach yields correct results.
El Gayar, Nesreen H.; Georgy, Sonia S.
2016-01-01
Background. Ibuprofen is used chronically in different animal models of inflammation by administration in drinking water or in diet due to its short half-life. Though this practice has been used for years, ibuprofen doses were never assayed against parenteral dose–response curves. This study aims at identifying the equivalent intraperitoneal (i.p.) doses of ibuprofen, when it is administered in drinking water or in diet. Methods. Bioassays were performed using formalin test and incisional pain model for antinociceptive efficacy and serum TXB2 for eicosanoid inhibitory activity. The dose–response curve of i.p. administered ibuprofen was constructed for each test using 50, 75, 100 and 200 mg/kg body weight (b.w.). The dose–response curves were constructed of phase 2a of the formalin test (the most sensitive phase to COX inhibitory agents), the area under the ‘change in mechanical threshold’-time curve in the incisional pain model and serum TXB2 levels. The assayed ibuprofen concentrations administered in drinking water were 0.2, 0.35, 0.6 mg/ml and those administered in diet were 82, 263, 375 mg/kg diet. Results. The 3 concentrations applied in drinking water lay between 73.6 and 85.5 mg/kg b.w., i.p., in case of the formalin test; between 58.9 and 77.8 mg/kg b.w., i.p., in case of the incisional pain model; and between 71.8 and 125.8 mg/kg b.w., i.p., in case of serum TXB2 levels. The 3 concentrations administered in diet lay between 67.6 and 83.8 mg/kg b.w., i.p., in case of the formalin test; between 52.7 and 68.6 mg/kg b.w., i.p., in case of the incisional pain model; and between 63.6 and 92.5 mg/kg b.w., i.p., in case of serum TXB2 levels. Discussion. The increment in pharmacological effects of different doses of continuously administered ibuprofen in drinking water or diet do not parallel those of i.p. administered ibuprofen. It is therefore difficult to assume the equivalent parenteral daily doses based on mathematical calculations. PMID:27547547
36 CFR 223.100 - Award to highest bidder.
Code of Federal Regulations, 2010 CFR
2010-07-01
... bidder has elected Forest Service road construction in response to an advertisement extending such an option, the Forest Service cannot perform the construction and in response to solicitation has not received a satisfactory bid for such construction within the period stated in the prospectus and the high...
Flavonoids as Putative Inducers of the Transcription Factors Nrf2, FoxO, and PPARγ
Duckstein, Nils; Hasler, Mario; Rimbach, Gerald
2017-01-01
Dietary flavonoids have been shown to extend the lifespan of some model organisms and may delay the onset of chronic ageing-related diseases. Mechanistically, the effects could be explained by the compounds scavenging free radicals or modulating signalling pathways. Transcription factors Nrf2, FoxO, and PPARγ possibly affect ageing by regulating stress response, adipogenesis, and insulin sensitivity. Using Hek-293 cells transfected with luciferase reporter constructs, we tested the potency of flavonoids from different subclasses (flavonols, flavones, flavanols, and isoflavones) to activate these transcription factors. Under cell-free conditions (ABTS and FRAP assays), we tested their free radical scavenging activities and used α-tocopherol and ascorbic acid as positive controls. Most of the tested flavonoids, but not the antioxidant vitamins, stimulated Nrf2-, FoxO-, and PPARγ-dependent promoter activities. Flavonoids activating Nrf2 also tended to induce a FoxO and PPARγ response. Interestingly, activation patterns of cellular stress response by flavonoids were not mirrored by their activities in ABTS and FRAP assays, which depended mostly on hydroxylation in the flavonoid B ring and, in some cases, extended that of the vitamins. In conclusion, the free radical scavenging properties of flavonoids do not predict whether these molecules can stimulate a cellular response linked to activation of longevity-associated transcription factors. PMID:28761622
Kim, Jin Goo; Lee, Joong Yub; Seo, Seung Suk; Choi, Choong Hyeok; Lee, Myung Chul
2013-01-01
Purpose To perform a cross-cultural adaptation and to test the measurement properties of the Korean version of International Knee Documentation Committee (K-IKDC) Subjective Knee Form. Materials and Methods According to the guidelines for cross-cultural adaptation, translation and backward translation of the English version of the IKDC Subjective Knee Form were performed. After translation into the Korean version, 150 patients who had knee-related problems were asked to complete the K-IKDC, Lysholm score, and Short Form-36 (SF-36). Of these patients, 126 were retested 2 weeks later to evaluate test-retest reliability, and 104 were recruited 3 months later to evaluate responsiveness. Construct validity was analyzed by investigating the correlation with Lysholm score and SF-36; content validity was also evaluated. Standardized mean response was calculated for evaluating responsiveness. Results The test-retest reliability proved excellent with a high value for the intraclass correlation coefficient (r=0.94). The internal consistency was strong (Cronbach's α=0.91). Good content validity with absence of floor not ceiling effects and good convergent and divergent validity were observed. Moderate responsiveness was shown (standardized mean response=0.689). Conclusions The K-IKDC demonstrated good measurement properties. We suggest that this instrument is an excellent evaluation instrument that can be used for Korean patients with knee-related injuries. PMID:24032098
A Preliminary Experimental Study on Vibration Responses of Foamed Concrete Composite Slabs
NASA Astrophysics Data System (ADS)
Rum, R. H. M.; Jaini, Z. M.; Ghaffar, N. H. Abd; Rahman, N. Abd
2017-11-01
In recent years, composite slab has received utmost demand as a floor system in the construction industry. The composite slab is an economical type of structure and able to accelerate the construction process. Basically, the composite slab can be casting by using a combination of corrugated steel deck and normal concrete in which selfweight represents a very large proportion of the total action. Therefore, foamed concrete become an attractive alternative to be utilized as a replacement of normal concrete. However, foamed concrete has high flexibility due to the presence of large amount of air-void and low modulus elasticity. It may result in vibration responses being greater. Hence, this experimental study investigates the vibration responses of composite slab made of corrugated steel deck and foamed concrete. The specimens were prepared with dimension of 750mm width, 1600mm length and 125mm thickness. The hammer-impact test was conducted to obtain the acceleration-time history. The analysis revealed that the first natural frequency is around 27.97 Hz to 40.94 Hz, while the maximum acceleration reaches 1.31 m/s2 to 1.88 m/s2. The first mode shape depicts normal pattern and favourable agreement of deformation.
Energy dissipation in quasi-linear viscoelastic tissues, cells, and extracellular matrix.
Babaei, Behzad; Velasquez-Mao, A J; Pryse, Kenneth M; McConnaughey, William B; Elson, Elliot L; Genin, Guy M
2018-05-21
Characterizing how a tissue's constituents give rise to its viscoelasticity is important for uncovering how hidden timescales underlie multiscale biomechanics. These constituents are viscoelastic in nature, and their mechanics must typically be assessed from the uniaxial behavior of a tissue. Confounding the challenge is that tissue viscoelasticity is typically associated with nonlinear elastic responses. Here, we experimentally assessed how fibroblasts and extracellular matrix (ECM) within engineered tissue constructs give rise to the nonlinear viscoelastic responses of a tissue. We applied a constant strain rate, "triangular-wave" loading and interpreted responses using the Fung quasi-linear viscoelastic (QLV) material model. Although the Fung QLV model has several well-known weaknesses, it was well suited to the behaviors of the tissue constructs, cells, and ECM tested. Cells showed relatively high damping over certain loading frequency ranges. Analysis revealed that, even in cases where the Fung QLV model provided an excellent fit to data, the the time constant derived from the model was not in general a material parameter. Results have implications for design of protocols for the mechanical characterization of biological materials, and for the mechanobiology of cells within viscoelastic tissues. Copyright © 2018. Published by Elsevier Ltd.
Thille, Patricia H; Russell, Grant M
2010-10-01
Current visions of family medicine and models of chronic illness management integrate evidence-based medicine with collaborative, patient-centered care, despite critiques that these constructs conflict with each other. With this potential conflict in mind, we applied a critical discursive psychology methodology to present discursive patterns articulated by 13 family physicians in Ontario, Canada, regarding care of patients living with multiple chronic illnesses. Physicians constructed competing versions of the terms "effective chronic illness management" and "patient involvement." One construction integrated individual responsibility for health with primacy of "evidence," resulting in a conceptualization consistent with paternalistic care. The second constructed effective care as involving active partnership of physician and patient, implying a need to foster the ability of both practitioners and patients to respond to complex challenges as they arose. The former pattern is inconsistent with visions of family medicine and chronic illness management, whereas the latter embodies it.
Cowley, Lorraine
2016-10-01
This article is based on a qualitative empirical project about a distinct kinship group who were among the first identified internationally as having a genetic susceptibility to cancer (Lynch Syndrome). 50 were invited to participate (42 were tested; eight declined genetic testing). 15, who had all accepted testing, were interviewed. They form a unique case study. This study aimed to explore interviewees' experiences of genetic testing and how these influenced their family relationships. A key finding was that participants framed the decision to be tested as 'common sense'; the idea of choice around the decision was negated and replaced by a moral imperative to be tested. Those who did not follow 'common sense' were judged to be imprudent. Family members who declined testing were discussed negatively by participants. The article addresses what is ethically problematic about how test decliners were discussed and whether these ethical concerns extend to others who are offered genetic testing. Discussions showed that genetic testing was viewed as both an autonomous choice and a responsibility. Yet the apparent conflict between the right to autonomy and the moral imperative of responsibility allowed participants to defend test decliners' decisions by expressing a preference for or defending choice over responsibility. The 'right not to know' seemed an important moral construct to help ethically manage unpopular decisions made by close family who declined testing. In light of this research, the erosion of the 'right not to know' in the genomic age could have subtle yet profound consequences for family relationships. © 2016 The Authors. Bioethics Published by John Wiley & Sons Ltd.
2016-01-01
Abstract This article is based on a qualitative empirical project about a distinct kinship group who were among the first identified internationally as having a genetic susceptibility to cancer (Lynch Syndrome). 50 were invited to participate (42 were tested; eight declined genetic testing). 15, who had all accepted testing, were interviewed. They form a unique case study. This study aimed to explore interviewees’ experiences of genetic testing and how these influenced their family relationships. A key finding was that participants framed the decision to be tested as ‘common sense’; the idea of choice around the decision was negated and replaced by a moral imperative to be tested. Those who did not follow ‘common sense’ were judged to be imprudent. Family members who declined testing were discussed negatively by participants. The article addresses what is ethically problematic about how test decliners were discussed and whether these ethical concerns extend to others who are offered genetic testing. Discussions showed that genetic testing was viewed as both an autonomous choice and a responsibility. Yet the apparent conflict between the right to autonomy and the moral imperative of responsibility allowed participants to defend test decliners’ decisions by expressing a preference for or defending choice over responsibility. The ‘right not to know’ seemed an important moral construct to help ethically manage unpopular decisions made by close family who declined testing. In light of this research, the erosion of the ‘right not to know’ in the genomic age could have subtle yet profound consequences for family relationships. PMID:27523581
49 CFR 230.23 - Responsibility for general construction and safe working pressure.
Code of Federal Regulations, 2010 CFR
2010-10-01
... MAINTENANCE STANDARDS Boilers and Appurtenances § 230.23 Responsibility for general construction and safe... construction of the steam locomotive boilers under their control. The steam locomotive owner shall establish the safe working pressure for each steam locomotive boiler, after giving full consideration to the...
The Modified Cognitive Constructions Coding System: Reliability and Validity Assessments
ERIC Educational Resources Information Center
Moran, Galia S.; Diamond, Gary M.
2006-01-01
The cognitive constructions coding system (CCCS) was designed for coding client's expressed problem constructions on four dimensions: intrapersonal-interpersonal, internal-external, responsible-not responsible, and linear-circular. This study introduces, and examines the reliability and validity of, a modified version of the CCCS--a version that…
Creating IRT-Based Parallel Test Forms Using the Genetic Algorithm Method
ERIC Educational Resources Information Center
Sun, Koun-Tem; Chen, Yu-Jen; Tsai, Shu-Yen; Cheng, Chien-Fen
2008-01-01
In educational measurement, the construction of parallel test forms is often a combinatorial optimization problem that involves the time-consuming selection of items to construct tests having approximately the same test information functions (TIFs) and constraints. This article proposes a novel method, genetic algorithm (GA), to construct parallel…
Field Performance of A Compacted Clay Landfill Final cover At A Humid Site
DOE Office of Scientific and Technical Information (OSTI.GOV)
Albright, William H.; Benson, Craig H.; Gee, Glendon W.
A study was conducted in southern Georgia, USA to evaluate how the hydraulic properties of the compacted clay barrier layer in a landfill final cover changed over a 4-yr service life. The cover was part of a test section constructed in a large drainage lysimeter that allowed CE Database subject headings: landfill, hydrogeology, compacted soils, lysimeters, desiccation continuous monitoring of the water balance. Patterns in the drainage (i.e., flow from the bottom of the cover) record suggest that preferential flow paths developed in the clay barrier soon after construction, apparently in response to desiccation cracking. After four years, the claymore » barrier was excavated and examined for changes in soil structure and hydraulic conductivity. Tests were conducted in situ with a sealed double-ring infiltrometer and two-stage borehole permeameters and in the laboratory on hand-carved blocks taken during construction and after four years of service. The in situ and laboratory tests indicated that the hydraulic conductivity increased approximately three orders of magnitude (from ? 10-7 to ? 10-4 cm s-1) during the service life. A dye tracer test and soil structure analysis showed that extensive cracking and root development occurred throughout the entire depth of the barrier layer. Laboratory tests on undisturbed specimens of the clay barrier indicated that the hydraulic conductivity of damaged clay barriers can be under-estimated significantly if small specimens (e.g., tube samples) are used for hydraulic conductivity assessment. The findings also indicate that clay barriers must be protected from desiccation and root intrusion if they are expected to function as intended, even at sites in warm, humid locations.« less
Normative Data for the Hayling and Brixton Tests in an Italian Population.
Spitoni, Grazia Fernanda; Bevacqua, Sara; Cerini, Claudia; Ciurli, Paola; Piccardi, Laura; Guariglia, Paola; Pezzuti, Lina; Antonucci, Gabriella
2018-06-01
The Hayling and Brixton tests constitute a short test battery that quickly assesses verbal and spatial inhibition and flexibility. This battery has shown high construct validity and strong reliability in clinical and experimental settings. The aim of this study was to develop an Italian version of the Hayling and Brixton tests and obtain normative values. We collected normative data from 301 healthy Italian participants aged between 16 and 94 years, taking into account all demographics. To maximize the sample size, we used the overlapping interval strategy. Adjusted scores for demographics were obtained by linear regression analysis. The performance on the Hayling and Brixton tests was influenced by age and education. In particular, age affected verbal accuracy and response time on the Hayling Sentence Completion Test, whereas education only affected the former. Differently, the spatial component, as measured by the Brixton Spatial Anticipation Test, was shaped only by age, which decreased the number of correct responses. Our study provides normative data that have been adjusted for relevant demographics and percentile grids in an Italian population. Our data support the use of the Hayling and Brixton tests as a valid instrument for performing neuropsychological evaluations and longitudinal analyses of executive functions in clinical practice and for research purposes.
A Ranking Method for Evaluating Constructed Responses
ERIC Educational Resources Information Center
Attali, Yigal
2014-01-01
This article presents a comparative judgment approach for holistically scored constructed response tasks. In this approach, the grader rank orders (rather than rate) the quality of a small set of responses. A prior automated evaluation of responses guides both set formation and scaling of rankings. Sets are formed to have similar prior scores and…
ERIC Educational Resources Information Center
Cole, Elsa Kircher; Goldblatt, Steven M.
1989-01-01
The article describes the responsibilities of public colleges and universities to award construction contracts to the lowest responsible bidder; discusses the purpose of bid statutes; and lists the factors institutions should consider in determining a bidder's responsibility. Also covered are the standard of review and due process rights of the…
Li, F; Harmer, P
1996-12-01
Self-determination theory (Deci & Ryan, 1985) suggests that motivational orientation or regulatory styles with respect to various behaviors can be conceptualized along a continuum ranging from low (a motivation) to high (intrinsic motivation) levels of self-determination. This pattern is manifested in the rank order of correlations among these regulatory styles (i.e., adjacent correlations are expected to be higher than those more distant) and is known as a simplex structure. Using responses from the Sport Motivation Scale (Pelletier et al., 1995) obtained from a sample of 857 college students (442 men, 415 women), the present study tested the simplex structure underlying SMS subscales via structural equation modeling. Results confirmed the simplex model structure, indicating that the various motivational constructs are empirically organized from low to high self-determination. The simplex pattern was further found to be invariant across gender. Findings from this study support the construct validity of the SMS and have important implications for studies focusing on the influence of motivational orientation in sport.
de Alwis, Manudul Pahansen; Äng, Björn Olov; Garme, Karl
2017-01-01
Objective High-performance marine craft personnel (HPMCP) are regularly exposed to vibration and repeated shock (VRS) levels exceeding maximum limitations stated by international legislation. Whereas such exposure reportedly is detrimental to health and performance, the epidemiological data necessary to link these adverse effects causally to VRS are not available in the scientific literature, and no suitable tools for acquiring such data exist. This study therefore constructed a questionnaire for longitudinal investigations in HPMCP. Methods A consensus panel defined content domains, identified relevant items and outlined a questionnaire. The relevance and simplicity of the questionnaire’s content were then systematically assessed by expert raters in three consecutive stages, each followed by revisions. An item-level content validity index (I-CVI) was computed as the proportion of experts rating an item as relevant and simple, and a scale-level content validity index (S-CVI/Ave) as the average I-CVI across items. The thresholds for acceptable content validity were 0.78 and 0.90, respectively. Finally, a dynamic web version of the questionnaire was constructed and pilot tested over a 1-month period during a marine exercise in a study population sample of eight subjects, while accelerometers simultaneously quantified VRS exposure. Results Content domains were defined as work exposure, musculoskeletal pain and human performance, and items were selected to reflect these constructs. Ratings from nine experts yielded S-CVI/Ave of 0.97 and 1.00 for relevance and simplicity, respectively, and the pilot test suggested that responses were sensitive to change in acceleration and that the questionnaire, following some adjustments, was feasible for its intended purpose. Conclusions A dynamic web-based questionnaire for longitudinal survey of key variables in HPMCP was constructed. Expert ratings supported that the questionnaire content is relevant, simple and sufficiently comprehensive, and the pilot test suggested that the questionnaire is feasible for longitudinal measurements in the study population. PMID:28729320
DOE Office of Scientific and Technical Information (OSTI.GOV)
Roach, Dennis Patrick; Rackow, Kirk A.
The FAA's Airworthiness Assurance NDI Validation Center, in conjunction with the Commercial Aircraft Composite Repair Committee, developed a set of composite reference standards to be used in NDT equipment calibration for accomplishment of damage assessment and post-repair inspection of all commercial aircraft composites. In this program, a series of NDI tests on a matrix of composite aircraft structures and prototype reference standards were completed in order to minimize the number of standards needed to carry out composite inspections on aircraft. Two tasks, related to composite laminates and non-metallic composite honeycomb configurations, were addressed. A suite of 64 honeycomb panels, representingmore » the bounding conditions of honeycomb construction on aircraft, was inspected using a wide array of NDI techniques. An analysis of the resulting data determined the variables that play a key role in setting up NDT equipment. This has resulted in a set of minimum honeycomb NDI reference standards that include these key variables. A sequence of subsequent tests determined that this minimum honeycomb reference standard set is able to fully support inspections over the full range of honeycomb construction scenarios found on commercial aircraft. In the solid composite laminate arena, G11 Phenolic was identified as a good generic solid laminate reference standard material. Testing determined matches in key velocity and acoustic impedance properties, as well as, low attenuation relative to carbon laminates. Furthermore, comparisons of resonance testing response curves from the G11 Phenolic NDI reference standard was very similar to the resonance response curves measured on the existing carbon and fiberglass laminates. NDI data shows that this material should work for both pulse-echo (velocity-based) and resonance (acoustic impedance-based) inspections.« less
1978-09-01
iE ARI TECHNICAL REPORT S~ TR-78-A31 M CCriterion-Reforencod Loasurement In the Army: Development of a Research-Based, Practical, Test Construction ...conducted to develop a Criterion- 1 Referenced Tests (CRTs) Construction Manual. Major accomplishments were the preparation of a written review of the...survey of the literature on Criterion-Referenced Testing’ conducted in order to provide an information base for development of the CRT Construction
Gerards, Sanne M P L; Hummel, Karin; Dagnelie, Pieter C; de Vries, Nanne K; Kremers, Stef P J
2013-01-18
Evaluating whether parental challenges and self-efficacy toward managing children's lifestyle behaviors are successfully addressed by interventions requires valid instruments. The Lifestyle Behavior Checklist (LBC) has recently been developed in the Australian context. It consists of two subscales: the Problem scale, which measures parental perceptions of children's behavioral problems related to overweight and obesity, and the Confidence scale, measuring parental self-efficacy in dealing with these problems. The aim of the current study was to systematically translate the questionnaire into Dutch and to evaluate its internal consistency, construct validity and test-retest reliability. The LBC was systematically translated by four experts at Maastricht University. In total, 392 parents of 3-to13-year-old children were invited to fill out two successive online questionnaires with a two-week interval. Of these, 273 parents responded to the first questionnaire (test, response rate = 69.6%), and of the 202 who could be invited for the second questionnaire (retest), 100 responded (response rate = 49.5%). We assessed the questionnaire's internal consistency (Cronbach's α), construct validity (Spearman's Rho correlation tests, using the criterion measures: restrictiveness, nurturance, and psychological control), and test-retest reliability (Spearman's Rho correlation tests). Both scales had high internal consistency (Cronbach's α ≥ 0.90). Spearman correlation coefficients indicated acceptable test-retest reliability for both the Problem scale (rs = 0.74) and the Confidence scale (rs = 0.70). The LBC Problem scale was significantly correlated to all criterion scales (nurturance, restrictiveness, psychological control) in the hypothesized direction, and the LBC Confidence scale was significantly correlated with nurturance and psychological control in the hypothesized direction, but not with restrictiveness. The Dutch translation of the LBC was found to be a reliable and reasonably valid questionnaire to measure parental perceptions of children's weight-related problem behavior and the extent to which parents feel confident to manage these problems.
Hybrid Damping System for an Electronic Equipment Mounting Shelf
NASA Technical Reports Server (NTRS)
Voracek, David; Kolkailah, Faysal A.; Cavalli, J. R.; Elghandour, Eltahry
1997-01-01
The objective of this study was to design and construct a vibration control system for an electronic equipment shelf to be evaluated in the NASA Dryden FTF-II. The vibration control system was a hybrid system which included passive and active damping techniques. Passive damping was fabricated into the equipment shelf using ScothDamp(trademark) damping film and aluminum constraining layers. Active damping was achieved using a two channel active control circuit employing QuickPack(trademark) sensors and actuators. Preliminary Chirp test results indicated passive damping smoothed the frequency response while active damping reduced amplitudes of the frequency response for most frequencies below 500Hz.
Hybrid Damping System for an Electronic Equipment Mounting Shelf
NASA Technical Reports Server (NTRS)
Voracek, David; Kolkailah, Faysal A.; Cavalli, J. R.; Elghandour, Eltahry
1997-01-01
The objective of this study was to design and construct a vibration control system for an electronic equipment shelf to be evaluated in the NASA Dryden FTF-11. The vibration control system was a hybrid system which included passive and active damping techniques. Passive damping was fabricated into the equipment shelf using ScothDamp(trademark) damping film and aluminum constraining layers. Active damping was achieved using a two channel active control circuit employing QuickPack(trademark) sensors and actuators. Preliminary Chirp test results indicated passive damping smoothed the frequency response while active damping reduced amplitudes of the frequency response for most frequencies below 500Hz.
Hatipkarasulu, Yilmaz; Gill, James H
2004-04-01
The increasing number of companies providing internet services and auction tools helped popularize the online reverse auction trend for purchasing commodities and services in the last decade. As a result, a number of owners, both public and private, accepted the online reverse auctions as the bidding technique for their construction projects. Owners, while trying to minimize their costs for construction projects, are also required to address their ethical responsibilities to the shareholders. In the case of online reverse auctions for construction projects, the ethical issues involved in the bidding technique directly reflects on the owner's ethical and social responsibilities to their shareholders. The goal of this paper is to identify the shareholder ethics and responsibilities in online reverse auctions for construction projects by analyzing the ethical issues for the parties involved in the process. The identification of the ethical issues and responsibilities requires clear definition and understanding of professional ethics and the roles of the involved parties. In this paper, first, the concept of professional ethics and social responsibility is described in a general form. To illustrate the ethical issues and responsibilities, a sample case of bidding for a construction project using online reverse auction techniques is presented in which the shareholders were actively involved in questioning the ethical issues. The issues involved in the bidding process and their reflection on the shareholder responsibilities are described and analyzed for each stage of the process. A brief discussion of the overall process is also included to address the general ethical issues involved in online reverse auctions.
Fluctuations in Student Understanding of Newton's 3rd Law
NASA Astrophysics Data System (ADS)
Clark, Jessica W.; Sayre, Eleanor C.; Franklin, Scott V.
2010-10-01
We present data from a between-student study on student response to questions on Newton's Third Law given throughout the academic year. The study, conducted at Rochester Institute of Technology, involved students from the first and third of a three-quarter sequence. Construction of a response curve reveals subtle dynamics in student learning not captured by simple pre/post testing. We find a a significant positive effect from direct instruction, peaking at the end of instruction on forces, that diminishes by the end of the quarter. Two quarters later, in physics III, a significant dip in correct response occurs when instruction changes from the vector quantities of electric forces and fields to the scalar quantity of electric potential. Student response rebounds to its initial values, however, once instruction returns to the vector-based topics involving magnetic fields.
Wilcox, D.A.; Xie, Y.
2007-01-01
Integrated, GIS-based, wetland predictive models were constructed to assist in predicting the responses of wetland plant communities to proposed new water-level regulation plans for Lake Ontario. The modeling exercise consisted of four major components: 1) building individual site wetland geometric models; 2) constructing generalized wetland geometric models representing specific types of wetlands (rectangle model for drowned river mouth wetlands, half ring model for open embayment wetlands, half ellipse model for protected embayment wetlands, and ellipse model for barrier beach wetlands); 3) assigning wetland plant profiles to the generalized wetland geometric models that identify associations between past flooding / dewatering events and the regulated water-level changes of a proposed water-level-regulation plan; and 4) predicting relevant proportions of wetland plant communities and the time durations during which they would be affected under proposed regulation plans. Based on this conceptual foundation, the predictive models were constructed using bathymetric and topographic wetland models and technical procedures operating on the platform of ArcGIS. An example of the model processes and outputs for the drowned river mouth wetland model using a test regulation plan illustrates the four components and, when compared against other test regulation plans, provided results that met ecological expectations. The model results were also compared to independent data collected by photointerpretation. Although data collections were not directly comparable, the predicted extent of meadow marsh in years in which photographs were taken was significantly correlated with extent of mapped meadow marsh in all but barrier beach wetlands. The predictive model for wetland plant communities provided valuable input into International Joint Commission deliberations on new regulation plans and was also incorporated into faunal predictive models used for that purpose.
Reynolds, Nicholas A; Ski, Chantal F; McEvedy, Samantha M; Thompson, David R; Cameron, Jan
2018-02-14
The aim of this study was to psychometrically evaluate the Heart Failure Screening Tool (Heart-FaST) via: (1) examination of internal construct validity; (2) testing of scale function in accordance with design; and (3) recommendation for change/s, if items are not well adjusted, to improve psychometric credential. Self-care is vital to the management of heart failure. The Heart-FaST may provide a prospective assessment of risk, regarding the likelihood that patients with heart failure will engage in self-care. Psychometric validation of the Heart-FaST using Rasch analysis. The Heart-FaST was administered to 135 patients (median age = 68, IQR = 59-78 years; 105 males) enrolled in a multidisciplinary heart failure management program. The Heart-FaST is a nurse-administered tool for screening patients with HF at risk of poor self-care. A Rasch analysis of responses was conducted which tested data against Rasch model expectations, including whether items serve as unbiased, non-redundant indicators of risk and measure a single construct and that rating scales operate as intended. The results showed that data met Rasch model expectations after rescoring or deleting items due to poor discrimination, disordered thresholds, differential item functioning, or response dependence. There was no evidence of multidimensionality which supports the use of total scores from Heart-FaST as indicators of risk. Aggregate scores from this modified screening tool rank heart failure patients according to their "risk of poor self-care" demonstrating that the Heart-FaST items constitute a meaningful scale to identify heart failure patients at risk of poor engagement in heart failure self-care. © 2018 John Wiley & Sons Ltd.
Koblitz, Amber R.; Persoskie, Alexander; Ferrer, Rebecca A.; Klein, William M. P.; Dwyer, Laura A.; Park, Elyse R.
2016-01-01
Introduction: Absolute and comparative risk perceptions, worry, perceived severity, perceived benefits, and self-efficacy are important theoretical determinants of tobacco use, but no measures have been validated to ensure the discriminant validity as well as test-retest reliability of these measures in the tobacco context. The purpose of the current study is to examine the reliability and factor structure of a measure assessing smoking-related health cognitions and emotions in a national sample of current and former heavy smokers in the National Lung Screening Trial. Methods: A sub-study of the National Lung Screening Trial assessed current and former smokers’ (age 55–74; N = 4379) self-reported health cognitions and emotions at trial enrollment and at 12-month follow-up. Items were derived from the Health Belief Model and Self-Regulation Model. Results: An exploratory factor analysis of baseline responses revealed a five-factor structure for former smokers (risk perceptions, worry, perceived severity, perceived benefits, and self-efficacy) and a six-factor structure for current smokers, such that absolute risk and comparative risk perceptions emerged as separate factors. A confirmatory factor analysis of 12-month follow-up responses revealed a good fit for the five latent constructs for former smokers and six latent constructs for current smokers. Longitudinal stability of these constructs was also demonstrated. Conclusions: This is the first study to examine tobacco-related health cognition and emotional constructs over time in current and former heavy smokers undergoing lung screening. This study found that the theoretical constructs were stable across time and that the factor structure differed based on smoking status (current vs. former). PMID:25964503
Code of Federal Regulations, 2010 CFR
2010-10-01
... compliance of health and safety codes during construction projects being performed by a Self-Governance Tribe... SERVICES TRIBAL SELF-GOVERNANCE Construction Roles of the Secretary in Establishing and Implementing Construction Project Agreements § 137.368 Is the Secretary responsible for oversight and compliance of health...
NASA Astrophysics Data System (ADS)
Sametoglu, Ferhat; Celikel, Oguz; Witt, Florian
2017-10-01
A differential spectral responsivity (DSR) measurement system has been designed and constructed at National Metrology Institute of Turkey (TUBITAK UME) to determine the spectral responsivity (SR) of a single- or a multi-junction photovoltaic device (solar cell). The DSR setup contains a broad band light bias source composed of a constructed Solar Simulator based on a 1000 W Xe-arc lamp owning a AM-1.5 filter and 250 W quartz-tungsten-halogen lamp, a designed and constructed LED-based Bias Light Sources, a DC voltage bias circuit, and a probe beam optical power tracking and correction circuit controlled with an ADuC847 microcontroller card together with an embedded C based software, designed and constructed in TUBITAK UME under this project. By using the constructed DSR measurement system, the SR calibration of solar cells, the monolitic triple-junction solar cell GaInP/GaInAs/Ge and its corresponding component cells have been performed within the EURAMET Joint Research Project SolCell.
Plotnikoff, Ronald C; Pickering, Michael A; Rhodes, Ryan E; Courneya, Kerry S; Spence, John C
2010-05-03
Attempts to demonstrate the efficacy of interventions aimed at increasing physical activity (PA) have been mixed. Further, studies are seldom designed in a manner that facilitates the understanding of how or why a treatment is effective or ineffective and PA intervention designs should be guided by a heavier reliance upon behavioral theory. The use of a mediating variable framework offers a systematic methodological approach to testing the role of theory, and could also identify the effectiveness of specific intervention components. The primary purpose of this paper was to test the mediating role that cognitive constructs may have played in regards to the positive effect that a workplace behavioral intervention had on leisure-time PA for women. A subsidiary purpose was to examine the cross-sectional relationships of these cognitive constructs with PA behavior. The Physical Activity Workplace Study was a randomized controlled trial which compared the effects of stage-matched and standard print materials upon self-reported leisure-time PA, within a workplace sample at 6 and 12-months. In this secondary analysis we examined the mediation effects of 14 psychosocial constructs across 3 major social-cognitive theories which were operationalized for the intervention materials and measured at baseline, 6 and 12-months. We examined change in PA and change in the psychological constructs employing a mediation strategy proposed by Baron and Kenny for: (1) the first 6-months (i.e., initial change), (2) the second 6-months (i.e., delayed change), and (3) the entire 12-months (overall change) of the study on 323 women (n = 213 control/standard materials group; n = 110 stage-matched materials group). Of the 14 constructs and 42 tests (including initial, delayed and overall change) two positive results were identified (i.e., overall change in pros, initial change in experiential powerful intervention approaches processes), with very small effect sizes. However, these mediating results were eliminated after adjusting for the multiple statistical tests. The intervention did not change these mediators in any substantive way, and show a similar pattern to prior research where interventions generally do not result in a change in mediation of behavior change. It is important to report mediation results in randomized controlled trials whether the findings are null or positive. Future studies may wish to focus on more detailed dose-response issues between mediators and behavior, the inclusion of moderators that could affect individual change, or different mediator constructs at higher levels of measurement specificity. Continued work on innovative and more powerful PA intervention approaches are needed.
ERIC Educational Resources Information Center
Bejar, Isaac I.; VanWinkle, Waverely; Madnani, Nitin; Lewis, William; Steier, Michael
2013-01-01
The paper applies a natural language computational tool to study a potential construct-irrelevant response strategy, namely the use of "shell language." Although the study is motivated by the impending increase in the volume of scoring of students responses from assessments to be developed in response to the Race to the Top initiative,…
Fruit and vegetable shopping practices and social support scales: A validation.
Baranowski, Tom; Missaghian, Mariam; Broadfoot, Alison; Watson, Kathy; Cullen, Karen; Nicklas, Theresa; Fisher, Jennifer; Baranowski, Janice; O'Donnell, Sharon
2006-01-01
To assess the psychometric characteristics of new scales of shopping practices and social support for purchasing fruits and vegetables. Participants were recruited in front of diverse grocery stores. Telephone data collection was done on 2 occasions, separated by 6 weeks. 166 food shoppers with children at home participated. New scales of food shopping practices and social support for purchasing fruits and vegetables were psychometrically analyzed and related to a measure of home fruit or vegetable availability as a test of construct validity. Both classical test and item response theory procedures were used. Correlations related the new measures to home fruit and vegetable availability. Single dimension scales were specified for fruit and vegetable shopping practices (35% of the variance), fruit purchase social support (53% of the variance), and vegetable purchase social support (52% of the variance). Item response theory difficulty estimates varied from -0.64 to 0.73 for fruit and vegetable shopping practices, from -0.55 to 0.33 for fruit purchase social support, and from -0.55 to 0.34 for vegetable social support. Each scale significantly correlated with home fruit and vegetable availability (construct validity), even after controlling for social desirability of response (0.19 for shopping practices, 0.37 for fruit purchasing social support, and 0.28 for vegetable purchasing social support). Person separation reliability was 0.80 for food shopping practices, 0.74 for fruit purchasing social support, and 0.73 for vegetable purchasing social support. The scales performed well. These scales are now available to help better understand fruit and vegetable shopping practices, fruit purchase social support, and vegetable purchase social support.
Jahn, Danielle R; Dressel, Jeffrey A; Gavett, Brandon E; O'Bryant, Sid E
2015-01-01
The Executive Interview (EXIT25) is an effective measure of executive dysfunction, but may be inefficient due to the time it takes to complete 25 interview-based items. The current study aimed to examine psychometric properties of the EXIT25, with a specific focus on determining whether a briefer version of the measure could comprehensively assess executive dysfunction. The current study applied a graded response model (a type of item response theory model for polytomous categorical data) to identify items that were most closely related to the underlying construct of executive functioning and best discriminated between varying levels of executive functioning. Participants were 660 adults ages 40 to 96 years living in West Texas, who were recruited through an ongoing epidemiological study of rural health and aging, called Project FRONTIER. The EXIT25 was the primary measure examined. Participants also completed the Trail Making Test and Controlled Oral Word Association Test, among other measures, to examine the convergent validity of a brief form of the EXIT25. Eight items were identified that provided the majority of the information about the underlying construct of executive functioning; total scores on these items were associated with total scores on other measures of executive functioning and were able to differentiate between cognitively healthy, mildly cognitively impaired, and demented participants. In addition, cutoff scores were recommended based on sensitivity and specificity of scores. A brief, eight-item version of the EXIT25 may be an effective and efficient screening for executive dysfunction among older adults.
Computer Literacy and the Construct Validity of a High-Stakes Computer-Based Writing Assessment
ERIC Educational Resources Information Center
Jin, Yan; Yan, Ming
2017-01-01
One major threat to validity in high-stakes testing is construct-irrelevant variance. In this study we explored whether the transition from a paper-and-pencil to a computer-based test mode in a high-stakes test in China, the College English Test, has brought about variance irrelevant to the construct being assessed in this test. Analyses of the…
Jaarsveld, Saskia; Lachmann, Thomas
2017-01-01
This paper discusses the importance of three features of psychometric tests for cognition research: construct definition, problem space, and knowledge domain. Definition of constructs, e.g., intelligence or creativity, forms the theoretical basis for test construction. Problem space, being well or ill-defined, is determined by the cognitive abilities considered to belong to the constructs, e.g., convergent thinking to intelligence, divergent thinking to creativity. Knowledge domain and the possibilities it offers cognition are reflected in test results. We argue that (a) comparing results of tests with different problem spaces is more informative when cognition operates in both tests on an identical knowledge domain, and (b) intertwining of abilities related to both constructs can only be expected in tests developed to instigate such a process. Test features should guarantee that abilities can contribute to self-generated and goal-directed processes bringing forth solutions that are both new and applicable. We propose and discuss a test example that was developed to address these issues. PMID:28220098
Aerodynamic measurements and thermal tests of a strain-gage balance in a cryogenic wind tunnel
NASA Technical Reports Server (NTRS)
Boyden, Richmond P.; Ferris, Alice T.; Johnson, William G., Jr.; Dress, David A.; Hill, Acquilla S.
1987-01-01
An internal strain-gage balance designed and constructed in Europe for use in cryogenic wind tunnels has been tested in the Langley 0.3-Meter Transonic Cryogenic Tunnel. Part of the evaluation was made at equilibrium balance temperatures and it consisted of comparing the data taken at a tunnel stagnation temperature of 300 K with the data taken at 200 K and 110 K while maintaining either the Reynolds number or the stagnation pressure. A sharp-leading-edge delta-wing model was used to provide the aerodynamic loading for these tests. Results obtained with the balance during the force tests were found to be accurate and repeatable both with and without the use of a convection shield on the balance. An additional part of this investigation involved obtaining data on the transient temperature response of the balance during both normal and rapid changes in the tunnel stagnation temperature. The variation of the temperature with time was measured at three locations on the balance near the physical locations of the strain gages. The use of a convection shield significantly increased the time required for the balance to stabilize at a new temperature during the temperature response tests.
Mickley, Manfred; Renner, Gerolf
2015-01-01
Do Current German-Language Intelligence Tests Take into Consideration the Special Needs of Children with Disabilities? A review of 23 German intelligence test manuals shows that test-authors do not exclude the use of their tests for children with disabilities. However, these special groups play a minor role in the construction, standardization, and validation of intelligence tests. There is no sufficient discussion and reflection concerning the issue which construct-irrelevant requirements may reduce the validity of the test or which individual test-adaptations are allowed or recommended. Intelligence testing of children with disabilities needs more empirical evidence on objectivity, reliability, and validity of the assessment-procedures employed. Future test construction and validation should systematically analyze construct-irrelevant variance in item format, the special needs of handicapped children, and should give hints for useful test-adaptations.
Comparison of Modal Analysis Methods Applied to a Vibro-Acoustic Test Article
NASA Technical Reports Server (NTRS)
Pritchard, Jocelyn; Pappa, Richard; Buehrle, Ralph; Grosveld, Ferdinand
2001-01-01
Modal testing of a vibro-acoustic test article referred to as the Aluminum Testbed Cylinder (ATC) has provided frequency response data for the development of validated numerical models of complex structures for interior noise prediction and control. The ATC is an all aluminum, ring and stringer stiffened cylinder, 12 feet in length and 4 feet in diameter. The cylinder was designed to represent typical aircraft construction. Modal tests were conducted for several different configurations of the cylinder assembly under ambient and pressurized conditions. The purpose of this paper is to present results from dynamic testing of different ATC configurations using two modal analysis software methods: Eigensystem Realization Algorithm (ERA) and MTS IDEAS Polyreference method. The paper compares results from the two analysis methods as well as the results from various test configurations. The effects of pressurization on the modal characteristics are discussed.
Sun, Yanqing; Qi, Li; Yang, Guangren; Gilbert, Peter B
2018-05-01
This article develops hypothesis testing procedures for the stratified mark-specific proportional hazards model with missing covariates where the baseline functions may vary with strata. The mark-specific proportional hazards model has been studied to evaluate mark-specific relative risks where the mark is the genetic distance of an infecting HIV sequence to an HIV sequence represented inside the vaccine. This research is motivated by analyzing the RV144 phase 3 HIV vaccine efficacy trial, to understand associations of immune response biomarkers on the mark-specific hazard of HIV infection, where the biomarkers are sampled via a two-phase sampling nested case-control design. We test whether the mark-specific relative risks are unity and how they change with the mark. The developed procedures enable assessment of whether risk of HIV infection with HIV variants close or far from the vaccine sequence are modified by immune responses induced by the HIV vaccine; this question is interesting because vaccine protection occurs through immune responses directed at specific HIV sequences. The test statistics are constructed based on augmented inverse probability weighted complete-case estimators. The asymptotic properties and finite-sample performances of the testing procedures are investigated, demonstrating double-robustness and effectiveness of the predictive auxiliaries to recover efficiency. The finite-sample performance of the proposed tests are examined through a comprehensive simulation study. The methods are applied to the RV144 trial. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
NASA Astrophysics Data System (ADS)
Quan, Guo-zheng; Zhan, Zong-yang; Wang, Tong; Xia, Yu-feng
2017-01-01
The response of true stress to strain rate, temperature and strain is a complex three-dimensional (3D) issue, and the accurate description of such constitutive relationships significantly contributes to the optimum process design. To obtain the true stress-strain data of ultra-high-strength steel, BR1500HS, a series of isothermal hot tensile tests were conducted in a wide temperature range of 973-1,123 K and a strain rate range of 0.01-10 s-1 on a Gleeble 3800 testing machine. Then the constitutive relationships were modeled by an optimally constructed and well-trained backpropagation artificial neural network (BP-ANN). The evaluation of BP-ANN model revealed that it has admirable performance in characterizing and predicting the flow behaviors of BR1500HS. A comparison on improved Arrhenius-type constitutive equation and BP-ANN model shows that the latter has higher accuracy. Consequently, the developed BP-ANN model was used to predict abundant stress-strain data beyond the limited experimental conditions. Then a 3D continuous interaction space for temperature, strain rate, strain and stress was constructed based on these predicted data. The developed 3D continuous interaction space for hot working parameters contributes to fully revealing the intrinsic relationships of BR1500HS steel.
Structural Response and Failure of a Full-Scale Stitched Graphite-Epoxy Wing
NASA Technical Reports Server (NTRS)
Jegley, Dawn C.; Lovejoy, Andrew E.; Bush, Harold G.
2001-01-01
Analytical and experimental results of the test for an all-composite full-scale wing box are presented. The wing box is representative of a section of a 220-passenger commercial transport aircraft wing box and was designed and constructed by The Boeing Company as part of the NASA Advanced Subsonics Technology (AST) program. The semi-span wing was fabricated from a graphite-epoxy material system with cover panels and spars held together using Kevlar stitches through the thickness. No mechanical fasteners were used to hold the stiffeners to the skin of the cover panels. Tests were conducted with and without low-speed impact damage, discrete source damage and repairs. Up-bending down-bending and brake roll loading conditions were applied. The structure with nonvisible impact damage carried 97% of Design Ultimate Load prior to failure through a lower cover panel access hole. Finite element and experimental results agree for the global response of the structure.
Two-Way Chemical Communication between Artificial and Natural Cells
2017-01-01
Artificial cells capable of both sensing and sending chemical messages to bacteria have yet to be built. Here we show that artificial cells that are able to sense and synthesize quorum signaling molecules can chemically communicate with V. fischeri, V. harveyi, E. coli, and P. aeruginosa. Activity was assessed by fluorescence, luminescence, RT-qPCR, and RNA-seq. Two potential applications for this technology were demonstrated. First, the extent to which artificial cells could imitate natural cells was quantified by a type of cellular Turing test. Artificial cells capable of sensing and in response synthesizing and releasing N-3-(oxohexanoyl)homoserine lactone showed a high degree of likeness to natural V. fischeri under specific test conditions. Second, artificial cells that sensed V. fischeri and in response degraded a quorum signaling molecule of P. aeruginosa (N-(3-oxododecanoyl)homoserine lactone) were constructed, laying the foundation for future technologies that control complex networks of natural cells. PMID:28280778
Psychometric testing of the clinical nurse leader staff satisfaction instrument.
Spiva, LeeAnna; Hart, Patricia L; Wesley, Mary Lou; Gallagher, Erin; McVay, Frank; Waggoner, Jessica; Jarrell, Nicole; Threatt, Jamie L
2014-01-01
Patient care is changing rapidly with increased complexity of care, patient volumes, and financial constraints with rising health care costs and limited reimbursements. In response, the clinical nurse leader (CNL) role was developed. No appropriate instrument exists to measure staff satisfaction with the CNL role. This study describes the development and testing of an instrument designed to measure staff satisfaction with implementation of the CNL role. The psychometric properties and factor structure of the Clinical Nurse Leader Staff Satisfaction (CNLSS) instrument was examined. A 2-factor solution was discovered for the CNLSS. Cronbach's alpha coefficients were acceptable for the subscales and instrument. The CNLSS is a valid and reliable instrument. Future research should focus on establishing test-retest reliability and construct validity.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 42 Public Health 1 2010-10-01 2010-10-01 false Is a Self-Governance Tribe responsible for... SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES TRIBAL SELF-GOVERNANCE Construction Roles of Self-Governance Tribe in Establishing and Implementing Construction Project Agreements § 137.350 Is a Self...
Medical University admission test: a confirmatory factor analysis of the results.
Luschin-Ebengreuth, Marion; Dimai, Hans P; Ithaler, Daniel; Neges, Heide M; Reibnegger, Gilbert
2016-05-01
The Graz Admission Test has been applied since the academic year 2006/2007. The validity of the Test was demonstrated by a significant improvement of study success and a significant reduction of dropout rate. The purpose of this study was a detailed analysis of the internal correlation structure of the various components of the Graz Admission Test. In particular, the question investigated was whether or not the various test parts constitute a suitable construct which might be designated as "Basic Knowledge in Natural Science." This study is an observational investigation, analyzing the results of the Graz Admission Test for the study of human medicine and dentistry. A total of 4741 applicants were included in the analysis. Principal component factor analysis (PCFA) as well as techniques from structural equation modeling, specifically confirmatory factor analysis (CFA), were employed to detect potential underlying latent variables governing the behavior of the measured variables. PCFA showed good clustering of the science test parts, including also text comprehension. A putative latent variable "Basic Knowledge in Natural Science," investigated by CFA, was indeed shown to govern the response behavior of the applicants in biology, chemistry, physics, and mathematics as well as text comprehension. The analysis of the correlation structure of the various test parts confirmed that the science test parts together with text comprehension constitute a satisfactory instrument for measuring a latent construct variable "Basic Knowledge in Natural Science." The present results suggest the fundamental importance of basic science knowledge for results obtained in the framework of the admission process for medical universities.
Ghahremani, Leila; Faryabi, Reza; Kaveh, Mohammad Hossein
2014-01-01
Background: Malaria is one of the most serious diseases in pregnant women as well as children less than 5 years around the world. The present study aimed to investigate the effect of health education based on the protection motivation theory on malaria preventive behaviors in the households of Ghale Ganj, Kerman, Iran in 2011. Methods: The present quasi-experimental study was conducted on 144 households covered by 8 health centers of Ghale Ganj, Kerman. The study samples were selected through systematic random sampling and the study data were collected using a questionnaire including demographic information, the constructs of the protection motivation theory, and a checklist for assessing the malaria preventive behaviors. After the pre-test, the intervention group underwent an educational intervention and after two months, the post-test was performed through the same questionnaire. Then, the data were entered into the SPSS statistical software (v. 18) and analyzed using Chi-square and Wilcoxon non-parametric tests. Besides, P < 0.05 was considered as statistically significant. Results: Before the intervention, no significant difference was found between the two study groups regarding perceived vulnerability, perceived severity, response costs, self-efficacy, response efficacy, and malaria preventive behaviors. After the intervention, however, a significant increase was observed in the intervention group's mean scores of all the constructs of the protection motivation theory as well as malaria preventive behaviors (P < 0.01). Conclusions: According to the findings of the study, educational intervention based on the protection motivation theory is highly effective in promoting malaria preventive behaviors. PMID:24829734
Solar Confocal interferometers for Sub-Picometer-Resolution Spectral Filters
NASA Technical Reports Server (NTRS)
Gary, G. Allen; Pietraszewski, Chris; West, Edward A.; Dines. Terence C.
2007-01-01
The confocal Fabry-Perot interferometer allows sub-picometer spectral resolution of Fraunhofer line profiles. Such high spectral resolution is needed to keep pace with the higher spatial resolution of the new set of large-aperture solar telescopes. The line-of-sight spatial resolution derived for line profile inversions would then track the improvements of the transverse spatial scale provided by the larger apertures. In particular, profile inversion allows improved velocity and magnetic field gradients to be determined independent of multiple line analysis using different energy levels and ions. The confocal interferometer's unique properties allow a simultaneous increase in both etendue and spectral power. The higher throughput for the interferometer provides significant decrease in the aperture, which is important in spaceflight considerations. We have constructed and tested two confocal interferometers. A slow-response thermal-controlled interferometer provides a stable system for laboratory investigation, while a piezoelectric interferometer provides a rapid response for solar observations. In this paper we provide design parameters, show construction details, and report on the laboratory test for these interferometers. The field of view versus aperture for confocal interferometers is compared with other types of spectral imaging filters. We propose a multiple etalon system for observing with these units using existing planar interferometers as pre-filters. The radiometry for these tests established that high spectral resolution profiles can be obtained with imaging confocal interferometers. These sub-picometer spectral data of the photosphere in both the visible and near-infrared can provide important height variation information. However, at the diffraction-limited spatial resolution of the telescope, the spectral data is photon starved due to the decreased spectral passband.
Ghahremani, Leila; Faryabi, Reza; Kaveh, Mohammad Hossein
2014-04-01
Malaria is one of the most serious diseases in pregnant women as well as children less than 5 years around the world. The present study aimed to investigate the effect of health education based on the protection motivation theory on malaria preventive behaviors in the households of Ghale Ganj, Kerman, Iran in 2011. The present quasi-experimental study was conducted on 144 households covered by 8 health centers of Ghale Ganj, Kerman. The study samples were selected through systematic random sampling and the study data were collected using a questionnaire including demographic information, the constructs of the protection motivation theory, and a checklist for assessing the malaria preventive behaviors. After the pre-test, the intervention group underwent an educational intervention and after two months, the post-test was performed through the same questionnaire. Then, the data were entered into the SPSS statistical software (v. 18) and analyzed using Chi-square and Wilcoxon non-parametric tests. Besides, P < 0.05 was considered as statistically significant. Before the intervention, no significant difference was found between the two study groups regarding perceived vulnerability, perceived severity, response costs, self-efficacy, response efficacy, and malaria preventive behaviors. After the intervention, however, a significant increase was observed in the intervention group's mean scores of all the constructs of the protection motivation theory as well as malaria preventive behaviors (P < 0.01). According to the findings of the study, educational intervention based on the protection motivation theory is highly effective in promoting malaria preventive behaviors.
Construct Validity: Advances in Theory and Methodology
Strauss, Milton E.; Smith, Gregory T.
2008-01-01
Measures of psychological constructs are validated by testing whether they relate to measures of other constructs as specified by theory. Each test of relations between measures reflects on the validity of both the measures and the theory driving the test. Construct validation concerns the simultaneous process of measure and theory validation. In this chapter, we review the recent history of validation efforts in clinical psychological science that has led to this perspective, and we review five recent advances in validation theory and methodology of importance for clinical researchers. These are: the emergence of nonjustificationist philosophy of science; an increasing appreciation for theory and the need for informative tests of construct validity; valid construct representation in experimental psychopathology; the need to avoid representing multidimensional constructs with a single score; and the emergence of effective new statistical tools for the evaluation of convergent and discriminant validity. PMID:19086835
Churgin, Matthew A.; He, Liping; Murray, John I.; Fang-Yen, Christopher
2014-01-01
The spatial and temporal control of transgene expression is an important tool in C. elegans biology. We previously described a method for evoking gene expression in arbitrary cells by using a focused pulsed infrared laser to induce a heat shock response (Churgin et al 2013). Here we describe detailed methods for building and testing a system for performing single-cell heat shock. Steps include setting up the laser and associated components, coupling the laser beam to a microscope, and testing heat shock protocols. All steps can be carried out using readily available off-the-shelf components. PMID:24835576
NASA Astrophysics Data System (ADS)
Pattalwar, Shrikant; Jones, Thomas; Strachan, John; Bate, Robert; Davies, Phil; McIntosh, Peter
2012-06-01
Through an international cryomodule collaboration, ASTeC at Daresbury Laboratory has taken the primary responsibility in leading the development of an optimised Superconducting RF (SRF) cryomodule, operating in CW mode for energy recovery facilities and other high duty cycle accelerators. For high beam current operation, Higher Order Mode (HOM) absorbers are critical components of the SRF Cryomodule, ensuring excessive heating of the accelerating structures and beam instabilities are effectively managed. This paper describes some of the cold tests conducted on the HOM absorbers and other critical components during the construction phase, to ensure that the quality and reliable cryomodule performance is maintained.
Measuring Quality and Outcomes in Sports Medicine.
Ruzbarsky, Joseph J; Marom, Niv; Marx, Robert G
2018-07-01
Patient-reported outcome measures (PROMs) are objective metrics critical to evaluating outcomes throughout orthopedic surgery. New instruments continue to emerge, increasing the breadth of information required for those intending to use these measures for research or clinical care. Although earlier metrics were developed using the principles of classic test theory, newer instruments constructed using item response theory are amenable to computer-adaptive testing and may change the way these instruments are administered. This article aims to define the psychometric properties that are important to understand when using all PROMs and to review the most widely used instruments in sports medicine. Copyright © 2018 Elsevier Inc. All rights reserved.
Flight test results for several light, canard-configured airplanes
NASA Technical Reports Server (NTRS)
Brown, Philip W.
1987-01-01
Brief flight evaluations of two different, light, composite constructed, canard and winglet configured airplanes were performed to assess their handling qualities; one airplane was a single engine, pusher design and the other a twin engine, push-pull configuration. An emphasis was placed on the slow speed/high angle of attack region for both airplanes and on the engine-out regime for the twin. Mission suitability assessment included cockpit and control layout, ground and airborne handling qualities, and turbulence response. Very limited performance data was taken. Stall/spin tests and the effects of laminar flow loss on performance and handling qualities were assessed on an extended range, single engine pusher design.
Design of Buoys for Mounting Wind Turbines at Exposed Sites
NASA Astrophysics Data System (ADS)
Erdoğan, Beytullah; Çelıkkol, Barbaros; Swift, Robinson
2018-04-01
In this study, two designs for a buoy capable of supporting a 10 kW wind turbine and its tower were developed to operate at the University of New Hampshire's Center of Ocean Renewable Energy testing site located off the Isles of Shoals, New Hampshire. The buoys are to be moored by a catenary chain system. To evaluate wave response, two Froude-scaled models were constructed, tested, and compared at the Ocean Engineering wave tank at the University of New Hampshire. These buoys have been implemented and compared with wave tank measurements of the spar displacement at a reference elevation 2.44 m above the mean water level.
A Theoretical and Empirical Comparison of Three Approaches to Achievement Testing.
ERIC Educational Resources Information Center
Haladyna, Tom; Roid, Gale
Three approaches to the construction of achievement tests are compared: construct, operational, and empirical. The construct approach is based upon classical test theory and measures an abstract representation of the instructional objectives. The operational approach specifies instructional intent through instructional objectives, facet design,…
DOT National Transportation Integrated Search
2004-07-01
The test wall was constructed to evaluate the behavior of MSE walls constructed with silty-clay soils through comparison between predicted and field measurements. The primary objectives of the construction of the LTRC reinforced test wall were to mon...
2006-10-01
maintenance, off-aircraft engine testing, miscellaneous chemical usage, and dust collectors. Air quality emissions inventories for Minneapolis-St. Paul...applicable. Contractor responsibilities are to review potentially hazardous workplaces; to monitor exposure to workplace chemical (e.g., asbestos...perform occupational health physicals for those workers subject to any accidental chemical exposures or engaged in hazardous waste work. There are
Aerodynamic instability: A case history
NASA Technical Reports Server (NTRS)
Eisenmann, R. C.
1985-01-01
The identification, diagnosis, and final correction of complex machinery malfunctions typically require the correlation of many parameters such as mechanical construction, process influence, maintenance history, and vibration response characteristics. The progression is reviewed of field testing, diagnosis, and final correction of a specific machinery instability problem. The case history presented addresses a unique low frequency instability problem on a high pressure barrel compressor. The malfunction was eventually diagnosed as a fluidic mechanism that manifested as an aerodynamic disturbance to the rotor assembly.
Dynamic Response of Reinforced Soil Systems. Volume 1. Report
1993-03-01
include Security Clas~sification) DYNAMIC RWSPC!SE OF REIFý1Cý SOIL SYSTEM~, VCTJI4E I OF II: PREPO~r . PERSONAL AUTHOR($) BMW3U, R.C.; FRAWASZY...protected by a burster slab. These protection measures are costly, time consuming to construct, and sensitive to multiple strikes. Soil has been used to...characterize the static load-deflection behavior of the reinforced soil. Dynamic pullout tests were then performed using the same parameters as the static
2013-01-01
Background Yearly formative knowledge testing (also known as progress testing) was shown to have a limited construct-validity and reliability in postgraduate medical education. One way to improve construct-validity and reliability is to improve the authenticity of a test. As easily accessible internet has become inseparably linked to daily clinical practice, we hypothesized that allowing internet access for a limited amount of time during the progress test would improve the perception of authenticity (face-validity) of the test, which would in turn improve the construct-validity and reliability of postgraduate progress testing. Methods Postgraduate trainees taking the yearly knowledge progress test were asked to participate in a study where they could access the internet for 30 minutes at the end of a traditional pen and paper test. Before and after the test they were asked to complete a short questionnaire regarding the face-validity of the test. Results Mean test scores increased significantly for all training years. Trainees indicated that the face-validity of the test improved with internet access and that they would like to continue to have internet access during future testing. Internet access did not improve the construct-validity or reliability of the test. Conclusion Improving the face-validity of postgraduate progress testing, by adding the possibility to search the internet for a limited amount of time, positively influences test performance and face-validity. However, it did not change the reliability or the construct-validity of the test. PMID:24195696
ERIC Educational Resources Information Center
Lynch, Mervin D.; Chaves, John
Items from Peirs-Harris and Coopersmith self-concept tests were evaluated against independent measures on three self-constructs, idealized, empathic, and worth. Construct measurements were obtained with the semantic differential and D statistic. Ratings were obtained from 381 children, grades 4-6. For each test, item ratings and construct measures…
Constructing the health care system in Greece: responsibility and powerlessness.
Lentza, Vassiliki; Montgomery, Anthony J; Georganta, Katerina; Panagopoulou, Efharis
2014-02-01
Based on health care professionals' (HPs) and patients' interviews about work demands and quality of care in hospitals, the study explores the way that patients and HPs constructed their identities to describe and construct the health care system in Greece. This is a qualitative study using a focus group (FG) design. Seven FGs discussions were conducted: three FGs discussions were conducted for the assessment of job stressors (1 for doctors, 1 for nurses and 1 for residents) and four FGs discussions for the assessment of quality of care (1 for doctors, 1 for nurses, 1 for residents and 1 for patients). The sample consisted of health care professionals working in a teaching hospital in the region of Thessaloniki, Greece, and patients who had at least one experience of any kind in the same hospital. Transcripts of the FGs discussions underwent discourse analysis. The results showed that both HPs and patients construct the health care system based on bipolar constructions of responsibility and powerlessness. In particular, participants use these constructions to allocate the responsibility to different levels of the health care system hierarchy or to the system per se constructing, at the same time, themselves as the 'viewers' of this system. The study allowed a deeper understanding of issues related to quality of care in hospitals providing context-specific information. Identity in health care organizations was inextricably linked to power and responsibility. The need to deconstruct this responsibility/powerlessness ideology is discussed. © 2013 The British Psychological Society.
Campos-Neto, A; Webb, J R; Greeson, K; Coler, R N; Skeiky, Y A W; Reed, S G
2002-06-01
We have recently shown that a cocktail containing two leishmanial recombinant antigens (LmSTI1 and TSA) and interleukin-12 (IL-12) as an adjuvant induces solid protection in both a murine and a nonhuman primate model of cutaneous leishmaniasis. However, because IL-12 is difficult to prepare, is expensive, and does not have the stability required for a vaccine product, we have investigated the possibility of using DNA as an alternative means of inducing protective immunity. Here, we present evidence that the antigens TSA and LmSTI1 delivered in a plasmid DNA format either as single genes or in a tandem digene construct induce equally solid protection against Leishmania major infection in susceptible BALB/c mice. Immunization of mice with either TSA DNA or LmSTI1 DNA induced specific CD4(+)-T-cell responses of the Th1 phenotype without a requirement for specific adjuvant. CD8 responses, as measured by cytotoxic-T-lymphocyte activity, were generated after immunization with TSA DNA but not LmSTI1 DNA. Interestingly, vaccination of mice with TSA DNA consistently induced protection to a much greater extent than LmSTI1 DNA, thus supporting the notion that CD8 responses might be an important accessory arm of the immune response for acquired resistance against leishmaniasis. Moreover, the protection induced by DNA immunization was specific for infection with Leishmania, i.e., the immunization had no effect on the course of infection of the mice challenged with an unrelated intracellular pathogen such as Mycobacterium tuberculosis. Conversely, immunization of BALB/c mice with a plasmid DNA that is protective against challenge with M. tuberculosis had no effect on the course of infection of these mice with L. major. Together, these results indicate that the protection observed with the leishmanial DNA is mediated by acquired specific immune response rather than by the activation of nonspecific innate immune mechanisms. In addition, a plasmid DNA containing a fusion construct of the two genes was also tested. Similarly to the plasmids encoding individual proteins, the fusion construct induced both specific immune responses to the individual antigens and protection against challenge with L. major. These results confirm previous observations about the possibility of DNA immunization against leishmaniasis and lend support to the idea of using a single polygenic plasmid DNA construct to achieve polyspecific immune responses to several distinct parasite antigens.