Occupational health and safety in the Moroccan construction sites: preliminary diagnosis

NASA Astrophysics Data System (ADS)

Tarik, Bakeli; Adil, Hafidi Alaoui

2018-05-01

Managing occupational health and safety on Moroccan construction sector represents the first step for projects' success. In fact, by avoiding accidents, all the related direct and indirect costs and delays can be prevented. That leads to an important question always asked by any project manager: what are the factors responsible for accidents? How can they be avoided? Through this research, the aim is to go through these questions, to contribute in occupational health and safety principles understanding, to identify construction accidentology and risk management opportunities and to approach the case of Moroccan construction sites by an accurate diagnosis. The approach is to make researchers, managers, stakeholders and deciders aware about the criticality of construction sites health and safety situation. And, to do the first step for a scientific research project in relation with health and safety in the Moroccan construction sector. For this, the paper will study the related state of art namely about construction sites accidents causation, and will focus on Reason's `Swiss cheese' model and its utilization for Moroccan construction sites health and safety diagnosis. The research will end with an estimation of an accidents fatality rate in the Moroccan construction sector and a benchmarking with the international rates. Finally, conclusions will be presented about the necessity of Occupational Health and Safety Management System (OHSMS) implementation, which shall cover all risk levels, and insure, at the same time, that the necessary defenses against accidents are on place.

Occupational safety issues in residential construction surveyed in Wisconsin, United States.

PubMed

Choi, Sang D; Carlson, Kathryn

2014-01-01

Residential construction is a high-risk industry in the U.S. due to the exposure to work-related safety hazards and fall injuries. This study aimed to examine the safety training and safe work practices of construction workers within the small residential construction industry. In order to achieve the study objectives, a survey was designed and sent to approximately 200 Wisconsin based residential construction contractors. About one third of the respondents stated that they did not have any form of safety programs. The study indicated that the most common types of work-related injuries in residential construction were slips/trips/falls and cuts/lacerations. The survey findings also suggested that the residential construction contractors needed to increase the utilization of fall protection safety equipment. Further education and subject matter expert training could provide benefits to improve occupational safety and health of the small business workforce in the residential construction industry.

Occupational Safety Issues in Residential Construction Surveyed in Wisconsin, United States

PubMed Central

CHOI, Sang D.; CARLSON, Kathryn

2014-01-01

Residential construction is a high-risk industry in the U.S. due to the exposure to work-related safety hazards and fall injuries. This study aimed to examine the safety training and safe work practices of construction workers within the small residential construction industry. In order to achieve the study objectives, a survey was designed and sent to approximately 200 Wisconsin based residential construction contractors. About one third of the respondents stated that they did not have any form of safety programs. The study indicated that the most common types of work-related injuries in residential construction were slips/trips/falls and cuts/lacerations. The survey findings also suggested that the residential construction contractors needed to increase the utilization of fall protection safety equipment. Further education and subject matter expert training could provide benefits to improve occupational safety and health of the small business workforce in the residential construction industry. PMID:25016947

Management system of health and safety work (SMK3) with job safety analysis (JSA) in PT. Nira Murni construction

NASA Astrophysics Data System (ADS)

Melliana, Armen, Yusrizal, Akmal, Syarifah

2017-11-01

PT Nira Murni construction is a contractor of PT Chevron Pacific Indonesia which engaged in contractor, fabrication, maintenance construction suppliers, and labor services. The high of accident rate in this company is caused the lack of awareness of workplace safety. Therefore, it requires an effort to reduce the accident rate on the company so that the financial losses can be minimized. In this study, Safe T-Score method is used to analyze the accident rate by measuring the level of frequency. Analysis is continued using risk management methods which identify hazards, risk measurement and risk management. The last analysis uses Job safety analysis (JSA) which will identify the effect of accidents. From the result of this study can be concluded that Job Safety Analysis (JSA) methods has not been implemented properly. Therefore, JSA method needs to follow-up in the next study, so that can be well applied as prevention of occupational accidents.

Unmanned aerial vehicles in construction and worker safety.

PubMed

Howard, John; Murashov, Vladimir; Branche, Christine M

2018-01-01

Applications of unmanned aerial vehicles (UAVs) for military, recreational, public, and commercial uses have expanded significantly in recent years. In the construction industry, UAVs are used primarily for monitoring of construction workflow and job site logistics, inspecting construction sites to assess structural integrity, and for maintenance assessments. As is the case with other emerging technologies, occupational safety assessments of UAVs lag behind technological advancements. UAVs may create new workplace hazards that need to be evaluated and managed to ensure their safe operation around human workers. At the same time, UAVs can perform dangerous tasks, thereby improving workplace safety. This paper describes the four major uses of UAVs, including their use in construction, the potential risks of their use to workers, approaches for risk mitigation, and the important role that safety and health professionals can play in ensuring safe approaches to the their use in the workplace. Published 2017. This article is a U.S. Government work and is in the public domain in the USA.

Study on the Application of the Kent Index Method on the Risk Assessment of Disastrous Accidents in Subway Engineering

PubMed Central

Lu, Hao; Wang, Mingyang; Yang, Baohuai; Rong, Xiaoli

2013-01-01

With the development of subway engineering, according to uncertain factors and serious accidents involved in the construction of subways, implementing risk assessment is necessary and may bring a number of benefits for construction safety. The Kent index method extensively used in pipeline construction is improved to make risk assessment much more practical for the risk assessment of disastrous accidents in subway engineering. In the improved method, the indexes are divided into four categories, namely, basic, design, construction, and consequence indexes. In this study, a risk assessment model containing four kinds of indexes is provided. Three kinds of risk occurrence modes are listed. The probability index model which considers the relativity of the indexes is established according to the risk occurrence modes. The model provides the risk assessment process through the fault tree method and has been applied in the risk assessment of Nanjing subway's river-crossing tunnel construction. Based on the assessment results, the builders were informed of what risks should be noticed and what they should do to avoid the risks. The need for further research is discussed. Overall, this method may provide a tool for the builders, and improve the safety of the construction. PMID:23710136

Reliability and safety, and the risk of construction damage in mining areas

NASA Astrophysics Data System (ADS)

Skrzypczak, Izabela; Kogut, Janusz P.; Kokoszka, Wanda; Oleniacz, Grzegorz

2018-04-01

This article concerns the reliability and safety of building structures in mining areas, with a particular emphasis on the quantitative risk analysis of buildings. The issues of threat assessment and risk estimation, in the design of facilities in mining exploitation areas, are presented here, indicating the difficulties and ambiguities associated with their quantification and quantitative analysis. This article presents the concept of quantitative risk assessment of the impact of mining exploitation, in accordance with ISO 13824 [1]. The risk analysis is illustrated through an example of a construction located within an area affected by mining exploitation.

Residential building codes, affordability, and health protection: a risk-tradeoff approach.

PubMed

Hammitt, J K; Belsky, E S; Levy, J I; Graham, J D

1999-12-01

Residential building codes intended to promote health and safety may produce unintended countervailing risks by adding to the cost of construction. Higher construction costs increase the price of new homes and may increase health and safety risks through "income" and "stock" effects. The income effect arises because households that purchase a new home have less income remaining for spending on other goods that contribute to health and safety. The stock effect arises because suppression of new-home construction leads to slower replacement of less safe housing units. These countervailing risks are not presently considered in code debates. We demonstrate the feasibility of estimating the approximate magnitude of countervailing risks by combining the income effect with three relatively well understood and significant home-health risks. We estimate that a code change that increases the nationwide cost of constructing and maintaining homes by $150 (0.1% of the average cost to build a single-family home) would induce offsetting risks yielding between 2 and 60 premature fatalities or, including morbidity effects, between 20 and 800 lost quality-adjusted life years (both discounted at 3%) each year the code provision remains in effect. To provide a net health benefit, the code change would need to reduce risk by at least this amount. Future research should refine these estimates, incorporate quantitative uncertainty analysis, and apply a full risk-tradeoff approach to real-world case studies of proposed code changes.

Product Engineering Class in the Software Safety Risk Taxonomy for Building Safety-Critical Systems

NASA Technical Reports Server (NTRS)

Hill, Janice; Victor, Daniel

2008-01-01

When software safety requirements are imposed on legacy safety-critical systems, retrospective safety cases need to be formulated as part of recertifying the systems for further use and risks must be documented and managed to give confidence for reusing the systems. The SEJ Software Development Risk Taxonomy [4] focuses on general software development issues. It does not, however, cover all the safety risks. The Software Safety Risk Taxonomy [8] was developed which provides a construct for eliciting and categorizing software safety risks in a straightforward manner. In this paper, we present extended work on the taxonomy for safety that incorporates the additional issues inherent in the development and maintenance of safety-critical systems with software. An instrument called a Software Safety Risk Taxonomy Based Questionnaire (TBQ) is generated containing questions addressing each safety attribute in the Software Safety Risk Taxonomy. Software safety risks are surfaced using the new TBQ and then analyzed. In this paper we give the definitions for the specialized Product Engineering Class within the Software Safety Risk Taxonomy. At the end of the paper, we present the tool known as the 'Legacy Systems Risk Database Tool' that is used to collect and analyze the data required to show traceability to a particular safety standard

Effect of STOP technique on safety climate in a construction company.

PubMed

Darvishi, Ebrahim; Maleki, Afshin; Dehestaniathar, Saeed; Ebrahemzadih, Mehrzad

2015-01-01

Safety programs are a core part of safety management in workplaces that can reduce incidents and injuries. The aim of this study was to investigate the influence of Safety Training Observation Program (STOP) technique as a behavior modification program on safety climate in a construction company. This cross-sectional study was carried out on workers of the Petrochemical Construction Company, western Iran. In order to improve safety climate, an unsafe behavior modification program entitled STOP was launched among workers of project during 12 months from April 2013 and April 2014. The STOP technique effectiveness in creating a positive safety climate was evaluated using the Safety Climate Assessment Toolkit. 76.78% of total behaviors were unsafe. 54.76% of total unsafe acts/ at-risk behaviors were related to the fall hazard. The most cause of unsafe behaviors was associated with habit and unavailability of safety equipment. After 12 month of continuous implementation the STOP technique, 55.8% of unsafe behaviors reduced among workers. The average score of safety climate evaluated using of the Toolkit, before and after the implementation of the STOP technique was 5.77 and 7.24, respectively. The STOP technique can be considered as effective approach for eliminating at-risk behavior, reinforcing safe work practices, and creating a positive safety climate in order to reduction incidents/injuries.

Risk management at the stage of design of high-rise construction facilities

NASA Astrophysics Data System (ADS)

Politi, Violetta

2018-03-01

This paper describes the assessment of the probabilistic risk of an accident formed in the process of designing a technically complex facility. It considers values of conditional probabilities of the compliance of load-bearing structures with safety requirements, provides an approximate list of significant errors of the designer and analyzes the relationship between the degree of compliance and the level of danger of errors. It describes and proposes for implementation the regulated procedures related to the assessment of the safety level of constructive solutions and the reliability of the construction process participants.

Key factors contributing to accident severity rate in construction industry in Iran: a regression modelling approach.

PubMed

Soltanzadeh, Ahmad; Mohammadfam, Iraj; Moghimbeigi, Abbas; Ghiasvand, Reza

2016-03-01

Construction industry involves the highest risk of occupational accidents and bodily injuries, which range from mild to very severe. The aim of this cross-sectional study was to identify the factors associated with accident severity rate (ASR) in the largest Iranian construction companies based on data about 500 occupational accidents recorded from 2009 to 2013. We also gathered data on safety and health risk management and training systems. Data were analysed using Pearson's chi-squared coefficient and multiple regression analysis. Median ASR (and the interquartile range) was 107.50 (57.24- 381.25). Fourteen of the 24 studied factors stood out as most affecting construction accident severity (p<0.05). These findings can be applied in the design and implementation of a comprehensive safety and health risk management system to reduce ASR.

Project safety as a sustainable competitive advantage.

PubMed

Rechenthin, David

2004-01-01

To be consistently profitable, a construction company must complete projects in scope, on schedule, and on budget. At the same time, the nature of the often high-risk work performed by construction companies can result in high accident rates. Clients and other stakeholders are placing increasing pressure on companies to decrease those accident rates. Clients routinely demand copies of safety plans and evidence of past results at the "pre-qualification" or "request for proposal" stages of the procurement process. Are high accident rates and the associated costs just a part of business? Companies that deliver on scope, schedule, and budget have a competitive advantage. Is it possible for projects with low accident rates to use it as a competitive advantage? Is the value added by safety just a temporary or parity issue, or does a successful safety program offer significant advantage to the company and the client? This article concludes that in the case of a high-risk industry, such as the construction industry, an organization with a successful safety program can promote safety performance as a sustainable competitive advantage. It is a choice the company can make.

Occupational safety and health in construction: a review of applications and trends

PubMed Central

SUÁREZ SÁNCHEZ, Fabián Alberto; CARVAJAL PELÁEZ, Gloria Isabel; CATALÁ ALÍS, Joaquín

2017-01-01

Due to the high number of accidents that occur in construction and the consequences this has for workers, organizations, society and countries, occupational safety and health (OSH) has become a very important issue for stakeholders to take care of the human resource. For this reason, and in order to know how OSH research in the construction sector has evolved over time, this article–in which articles published in English were studied–presents an analysis of research conducted from 1930 to 2016. The classification of documents was carried out following the Occupational Safety and Health Cycle which is composed of five steps: regulation, education and training, risk assessment, risk prevention, and accident analysis. With the help of tree diagrams we show that evolution takes place. In addition, risk assessment, risk prevention, and accident analysis were the research topics with the highest number of papers. The main objective of the study was to contribute to knowledge of the subject, showing trends through an exploratory study that may serve as a starting point for further research. PMID:28179610

Occupational safety and health in construction: a review of applications and trends.

PubMed

Suárez Sánchez, Fabián Alberto; Carvajal Peláez, Gloria Isabel; Catalá Alís, Joaquín

2017-06-08

Due to the high number of accidents that occur in construction and the consequences this has for workers, organizations, society and countries, occupational safety and health (OSH) has become a very important issue for stakeholders to take care of the human resource. For this reason, and in order to know how OSH research in the construction sector has evolved over time, this article-in which articles published in English were studied-presents an analysis of research conducted from 1930 to 2016. The classification of documents was carried out following the Occupational Safety and Health Cycle which is composed of five steps: regulation, education and training, risk assessment, risk prevention, and accident analysis. With the help of tree diagrams we show that evolution takes place. In addition, risk assessment, risk prevention, and accident analysis were the research topics with the highest number of papers. The main objective of the study was to contribute to knowledge of the subject, showing trends through an exploratory study that may serve as a starting point for further research.

Safety at the Summit.

ERIC Educational Resources Information Center

Huddleston, Elizabeth

2001-01-01

Explores how risk-management strategies can make the difference in climbing wall safety. Wall design, adhering to wall construction standards, limiting wall access, and climber evaluation are discussed. (GR)

A job safety program for construction workers designed to reduce the potential for occupational injury using tool box training sessions and computer-assisted biofeedback stress management techniques.

PubMed

Johnson, Kenneth A; Ruppe, Joan

2002-01-01

This project was conducted with a multicultural construction company in Hawaii, USA. The job duties performed included drywall and carpentry work. The following objectives were selected for this project: (a) fire prevention training and inspection of first aid equipment; (b) blood-borne pathogen training and risk evaluation; (c) ergonomic and risk evaluation intervention program; (d) electrical safety training and inspection program; (e) slips, trips, and falls safety training; (f) stress assessment and Personal Profile System; (g) safety and health program survey; (h) improving employee relations and morale by emphasizing spirituality; and (i) computer-assisted biofeedback stress management training. Results of the project indicated that observed safety hazards, reported injuries, and levels of perceived stress. were reduced for the majority of the population.

23 CFR 924.7 - Program structure.

Code of Federal Regulations, 2011 CFR

2011-04-01

... HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HIGHWAY SAFETY HIGHWAY SAFETY IMPROVEMENT PROGRAM... implementation through highway safety improvement projects. The HSIP includes construction and operational improvements on high risk rural roads, and elimination of hazards at railway-highway grade crossings. (b) The...

23 CFR 924.7 - Program structure.

Code of Federal Regulations, 2010 CFR

2010-04-01

... HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HIGHWAY SAFETY HIGHWAY SAFETY IMPROVEMENT PROGRAM... implementation through highway safety improvement projects. The HSIP includes construction and operational improvements on high risk rural roads, and elimination of hazards at railway-highway grade crossings. (b) The...

Environmental Assessment for Construction of Radial Arm Spill Gates MacDill Air Force Base, Florida

DTIC Science & Technology

2012-05-01

requires that Federal agencies identify and assess environmental health and safety risks that might disproportionately affect children. The Proposed...Action would not pose any adverse or disproportionate environmental health or safety risks to children living near the base. Safety precautions...Department of Envir. Protection 3900 Commonwealth Blvd, Mail Station 47 Tallahassee, FL 32399-3000 RE: Draft Environmental Assessment and Draft

Environmental Assessment for Construction of Multiple Roadway Improvement Projects MacDill AFB, Florida

DTIC Science & Technology

2011-01-01

flooded) is within tidal areas and occurs mainly on mangrove areas . These soils are subject to Affected Environment Environmental Assessment for...requires that Federal agencies identify and assess environmental health and safety risks that might disproportionately affect children. The Proposed...Action would not pose any adverse or disproportionate environmental health or safety risks to children living near the base. Safety precautions

Studies on Labour Safety in Construction Sites

PubMed Central

Kanchana, S.; Sivaprakash, P.; Joseph, Sebastian

2015-01-01

Construction industry has accomplished extensive growth worldwide particularly in past few decades. For a construction project to be successful, safety of the structures as well as that of the personnel is of utmost importance. The safety issues are to be considered right from the design stage till the completion and handing over of the structure. Construction industry employs skilled and unskilled labourers subject to construction site accidents and health risks. A proper coordination between contractors, clients, and workforce is needed for safe work conditions which are very much lacking in Indian construction companies. Though labour safety laws are available, the numerous accidents taking place at construction sites are continuing. Management commitment towards health and safety of the workers is also lagging. A detailed literature study was carried out to understand the causes of accidents, preventive measures, and development of safe work environment. This paper presents the results of a questionnaire survey, which was distributed among various categories of construction workers in Kerala region. The paper examines and discusses in detail the total working hours, work shifts, nativity of the workers, number of accidents, and type of injuries taking place in small and large construction sites. PMID:26839916

Studies on Labour Safety in Construction Sites.

PubMed

Kanchana, S; Sivaprakash, P; Joseph, Sebastian

2015-01-01

Construction industry has accomplished extensive growth worldwide particularly in past few decades. For a construction project to be successful, safety of the structures as well as that of the personnel is of utmost importance. The safety issues are to be considered right from the design stage till the completion and handing over of the structure. Construction industry employs skilled and unskilled labourers subject to construction site accidents and health risks. A proper coordination between contractors, clients, and workforce is needed for safe work conditions which are very much lacking in Indian construction companies. Though labour safety laws are available, the numerous accidents taking place at construction sites are continuing. Management commitment towards health and safety of the workers is also lagging. A detailed literature study was carried out to understand the causes of accidents, preventive measures, and development of safe work environment. This paper presents the results of a questionnaire survey, which was distributed among various categories of construction workers in Kerala region. The paper examines and discusses in detail the total working hours, work shifts, nativity of the workers, number of accidents, and type of injuries taking place in small and large construction sites.

Safety and ergonomic considerations for an aging workforce in the US construction industry.

PubMed

Choi, Sang D

2009-01-01

The US construction workforce is aging as millions of baby boomers move toward retirement age. Older workers make a substantial contribution to construction in terms of skills and experience. However, construction is still one of the most physically demanding occupations, hence the health implications for older workers. Descriptions of injuries, illnesses and fatalities among older workers in the US construction industry from recent literature are presented along with the practical health and safety interventions that have been proposed including: ergonomic interventions, wellness programs, worksite housekeeping, training, and safety climate. Understanding the risks and hazards in specific industries could help identify training and intervention requirements to meet the challenges facing aging workers in these occupational groups.

Integrated risk management for improving internal traffic control, work-zone safety, and mobility during major construction.

DOT National Transportation Integrated Search

2012-10-01

Highway construction is among the most dangerous industries in the US. Internal traffic control design, along with how construction : equipment and vehicles interact with the traveling public, have a significant effect on how safe a highway construct...

Object-Oriented Bayesian Networks (OOBN) for Aviation Accident Modeling and Technology Portfolio Impact Assessment

NASA Technical Reports Server (NTRS)

Shih, Ann T.; Ancel, Ersin; Jones, Sharon M.

2012-01-01

The concern for reducing aviation safety risk is rising as the National Airspace System in the United States transforms to the Next Generation Air Transportation System (NextGen). The NASA Aviation Safety Program is committed to developing an effective aviation safety technology portfolio to meet the challenges of this transformation and to mitigate relevant safety risks. The paper focuses on the reasoning of selecting Object-Oriented Bayesian Networks (OOBN) as the technique and commercial software for the accident modeling and portfolio assessment. To illustrate the benefits of OOBN in a large and complex aviation accident model, the in-flight Loss-of-Control Accident Framework (LOCAF) constructed as an influence diagram is presented. An OOBN approach not only simplifies construction and maintenance of complex causal networks for the modelers, but also offers a well-organized hierarchical network that is easier for decision makers to exploit the model examining the effectiveness of risk mitigation strategies through technology insertions.

A Software Safety Risk Taxonomy for Use in Retrospective Safety Cases

NASA Technical Reports Server (NTRS)

Hill, Janice L.

2007-01-01

Safety standards contain technical and process-oriented safely requirements. The best time to include these requirements is early in the development lifecycle of the system. When software safety requirements are levied on a legacy system after the fact, a retrospective safety case will need to be constructed for the software in the system. This can be a difficult task because there may be few to no art facts available to show compliance to the software safely requirements. The risks associated with not meeting safely requirements in a legacy safely-critical computer system must be addressed to give confidence for reuse. This paper introduces a proposal for a software safely risk taxonomy for legacy safely-critical computer systems, by specializing the Software Engineering Institute's 'Software Development Risk Taxonomy' with safely elements and attributes.

The Attitude of Civil Engineering Students towards Health and Safety Risk Management: A Case Study

ERIC Educational Resources Information Center

Petersen, A. K.; Reynolds, J. H.; Ng, L. W. T.

2008-01-01

The highest rate of accidents and injuries in British industries has been reported by the construction industry during the past decade. Since then stakeholders have recognised that a possible solution would be to inculcate a good attitude towards health and safety risk management in undergraduate civil engineering students and construction…

Sun safety measures among construction workers in Britain.

PubMed

Madgwick, P; Houdmont, J; Randall, R

2011-09-01

Relative to other occupational groups in Britain, construction workers have a high incidence of skin cancer attributable to sun exposure. The importance of sun safety measures to minimize the risk of skin cancer is recognized in the literature; however, little is known about the factors associated with their use by construction workers. Knowledge in this area could help inform interventions to encourage sun safety behaviour within the sector. To investigate socio-demographic and occupational characteristics associated with the use of sun safety measures among construction workers in Britain. Data collection was by means of a self-administered questionnaire, which was sent to 360 construction workers. Information collected included socio-demographic and occupational characteristics and the use of sun safety measures. Participants worked outdoors for an average of 6.6 h/day. Three specific sun safety measures were used by the majority of respondents. Logistic regression analyses showed that certain socio-demographic and occupational factors were associated with the use of sun safety measures. In particular, receipt of sun safety training was positively associated with the wearing of long sleeved, loose fitting tops and trousers (OR, 1.69; 95% CI, 1.02-2.80) and sunglasses (OR, 1.85; 95% CI, 1.10-3.13). The results highlight the importance of employer-led sun safety interventions in the British construction industry. Interventions that take account of demographic and occupational characteristics are likely to have a positive impact in terms of improving workers' use of sun safety measures.

Safety evaluation model of urban cross-river tunnel based on driving simulation.

PubMed

Ma, Yingqi; Lu, Linjun; Lu, Jian John

2017-09-01

Currently, Shanghai urban cross-river tunnels have three principal characteristics: increased traffic, a high accident rate and rapidly developing construction. Because of their complex geographic and hydrological characteristics, the alignment conditions in urban cross-river tunnels are more complicated than in highway tunnels, so a safety evaluation of urban cross-river tunnels is necessary to suggest follow-up construction and changes in operational management. A driving risk index (DRI) for urban cross-river tunnels was proposed in this study. An index system was also constructed, combining eight factors derived from the output of a driving simulator regarding three aspects of risk due to following, lateral accidents and driver workload. Analytic hierarchy process methods and expert marking and normalization processing were applied to construct a mathematical model for the DRI. The driving simulator was used to simulate 12 Shanghai urban cross-river tunnels and a relationship was obtained between the DRI for the tunnels and the corresponding accident rate (AR) via a regression analysis. The regression analysis results showed that the relationship between the DRI and the AR mapped to an exponential function with a high degree of fit. In the absence of detailed accident data, a safety evaluation model based on factors derived from a driving simulation can effectively assess the driving risk in urban cross-river tunnels constructed or in design.

Degrees of connectivity: Systems model for upstream risk assessment and mitigation.

PubMed

Gambatese, John; AlOmari, Kasim

2016-08-01

There is growing recognition that in order to further improve safety performance, attention needs to be given beyond the immediate working conditions and worker actions. A systems approach to construction safety enables considering: multiple project elements simultaneously; connections between different elements; and all system elements affected by safety risk. This paper describes recent and current research to conceptualize a typical building project in terms of connections between workers, activities, and design elements, and to verify and analyze impacts of the design and worker interactions on worker safety. Prior research provides the basis for a network tying the design elements, construction activities, and work crews on a typical building project together along with the extent of interaction between each of the system elements in terms of safety. In conjunction with this systems approach, the researchers propose a concept for viewing and managing construction safety through four different types of connections, or "degrees of connectivity," between the different workers, activities, and design elements in the system. The degrees of connectivity are defined as: interacting with the design element during its construction (DoC #1); interacting with the design element in its final form to attach another component to it (DoC #2) or by working in the vicinity of it (DoC #3); and indirectly interacting with the design element through another worker (DoC #4). To support and verify the presence of the concept in practice, the researchers conducted a survey of construction personnel. The survey results confirm that the four different degrees of connectivity are present and felt during construction operations, and indicate that attention should be given to all design elements, activities, and workers to which a worker is "connected". According to the survey respondents, DoC's #1 and #2 are recognized as the most widely present on construction sites. Eighty percent of the respondents believe that the design element has a moderate or greater impact on worker safety while it is being constructed. These initial research steps provide the starting point for continuing study that aims to develop and demonstrate the degrees of connectivity concept linking workers and design elements, with the goal of understanding how to design a project and work operations in order to improve safety during construction. Copyright © 2015 Elsevier Ltd. All rights reserved.

University building safety index measurement using risk and implementation matrix

NASA Astrophysics Data System (ADS)

Rahman, A.; Arumsari, F.; Maryani, A.

2018-04-01

Many high rise building constructed in several universities in Indonesia. The high-rise building management must provide the safety planning and proper safety equipment in each part of the building. Unfortunately, most of the university in Indonesia have not been applying safety policy yet and less awareness on treating safety facilities. Several fire accidents in university showed that some significant risk should be managed by the building management. This research developed a framework for measuring the high rise building safety index in university The framework is not only assessed the risk magnitude but also designed modular building safety checklist for measuring the safety implementation level. The safety checklist has been developed for 8 types of the university rooms, i.e.: office, classroom, 4 type of laboratories, canteen, and library. University building safety index determined using risk-implementation matrix by measuring the risk magnitude and assessing the safety implementation level. Building Safety Index measurement has been applied in 4 high rise buildings in ITS Campus. The building assessment showed that the rectorate building in secure condition and chemical department building in beware condition. While the library and administration center building was in less secure condition.

Correlation of causal factors that influence construction safety performance: A model.

PubMed

Rodrigues, F; Coutinho, A; Cardoso, C

2015-01-01

The construction sector has presented positive development regarding the decrease in occupational accident rates in recent years. Regardless, the construction sector stands out systematically from other industries due to its high number of fatalities. The aim of this paper is to deeply understand the causality of construction accidents from the early design phase through a model. This study reviewed several research papers presenting various analytical models that correlate the contributing factors to occupational accidents in this sector. This study also analysed different construction projects and conducted a survey of design and site supervision teams. This paper proposes a model developed from the analysis of existing ones, which correlates the causal factors through all the construction phases. It was concluded that effective risk prevention can only be achieved by a global correlation of causal factors including not only production ones but also client requirements, financial climate, design team competence, project and risk management, financial capacity, health and safety policy and early planning. Accordingly, a model is proposed.

Need of risk management practice amongst bumiputera contractors in Malaysia construction industries

NASA Astrophysics Data System (ADS)

Syuhada Fadzil, Nur; Noor, Nurazuwa Md; Rahman, Ismail Abdul

2017-11-01

Malaysia construction industry has been growing continuously with double-digit growth for the past two decades. There are many issues surrounded the industry such as delay in delivery, cost overrun, quality and safety. In bumiputera contractor’s context, the literature review found that 32 issues were encountered in the construction project. These issues can be handled properly with the application of risk management. According to previous researchers, application of risk management in Malaysia construction industry is at the low level where it is implemented in traditional ways that are brainstorming and checklist. These were due to lack of knowledge, the high cost of hiring experts and avoiding extra cost. Besides that, this study also intentions to analyse the risk categories in the construction industry as well as identify risk management process to resolve the construction issues. Hence, this paper presents issues engulfed by Bumiputera contractors which can partly be resolved by applying risk management practice in carrying out the construction activity. This may inspire the contractors to apply the risk management practice in ensuring the success of their construction project.

The effects of safety handrails and the heights of scaffolds on the subjective and objective evaluation of postural stability and cardiovascular stress in novice and expert construction workers.

PubMed

Min, Seung-Nam; Kim, Jung-Yong; Parnianpour, Mohamad

2012-05-01

Work performed on scaffolds carries the risk of falling that disproportionately threatens the safety and health of novice construction workers. Hence, objective measures of the postural stability, cardiovascular stress, and subjective difficulty in maintaining postural balance were evaluated for four expert and four novice construction workers performing a manual task in a standing posture on a scaffold with and without safety handrails at two different elevation heights. Based on a multivariate analysis of variance, the experience, scaffold height, and presence of a handrail were found to significantly affect measures of the postural stability and cardiovascular stress. At a lower level of worker experience, a higher scaffold height, and in the absence of a handrail (which may correspond to higher risk of a fall), postural stability was significantly reduced, while cardiovascular stress and subjective difficulties in maintaining postural balance increased. We emphasize the importance of training and handrails for fall prevention at construction sites. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Fall hazard control observed on residential construction sites.

PubMed

Kaskutas, Vicki; Dale, Ann Marie; Nolan, James; Patterson, Dennis; Lipscomb, Hester J; Evanoff, Bradley

2009-06-01

Falls are a leading cause of mortality and morbidity in the construction industry. This study measured fall hazards at residential construction sites. Trained carpenters administered the St. Louis Audit of Fall Risks and interviewed carpenters. The prevalence of fall prevention practices meeting safety criteria was counted and correlations explored. We identified a high prevalence of fall hazards at the 197 residential sites audited. Roof sheathing met safety criteria most consistently (81%) and truss setting least consistently (28%). Use of personal fall arrest and monitoring of unguarded floor openings were rare. Safer performance on several scales was correlated. Construction sites of large-sized contractors were generally safer than smaller contractors. Apprentice carpenters were less familiar with their employers' fall prevention plan than experienced workers. Safety could be improved with consistent use of recognized fall prevention practices at residential construction sites.

Compassionate containment? Balancing technical safety and therapy in the design of psychiatric wards.

PubMed

Curtis, Sarah; Gesler, Wilbert; Wood, Victoria; Spencer, Ian; Mason, James; Close, Helen; Reilly, Joseph

2013-11-01

This paper contributes to the international literature examining design of inpatient settings for mental health care. Theoretically, it elaborates the connections between conceptual frameworks from different strands of literature relating to therapeutic landscapes, social control and the social construction of risk. It does so through a discussion of the substantive example of research to evaluate the design of a purpose built inpatient psychiatric health care facility, opened in 2010 as part of the National Health Service (NHS) in England. Findings are reported from interviews or discussion groups with staff, patients and their family and friends. This paper demonstrates a strong, and often critical awareness among members of staff and other participants about how responsibilities for risk governance of 'persons' are exercised through 'technical safety' measures and the implications for therapeutic settings. Our participants often emphasised how responsibility for technical safety was being invested in the physical infrastructure of certain 'places' within the hospital where risks are seen to be 'located'. This illuminates how the spatial dimensions of social constructions of risk are incorporated into understandings about therapeutic landscapes. There were also more subtle implications, partly relating to 'Panopticist' theories about how the institution uses technical safety to supervise its own mechanisms, through the observation of staff behaviour as well as patients and visitors. Furthermore, staff seemed to feel that in relying on technical safety measures they were, to a degree, divesting themselves of human responsibility for risks they are required to manage. However, their critical assessment showed their concerns about how this might conflict with a more therapeutic approach and they contemplated ways that they might be able to engage more effectively with patients without the imposition of technical safety measures. These findings advance our thinking about the construction of therapeutic landscapes in theory and in practice. Copyright © 2013. Published by Elsevier Ltd.

Protecting Construction Worker Health and Safety in Ontario, Canada: Identifying a Union Safety Effect.

PubMed

Amick, Benjamin C; Hogg-Johnson, Sheilah; Latour-Villamil, Desiree; Saunders, Ron

2015-12-01

Do Ontario unionized construction firms have lower workers' compensation claims rates compared with nonunion firms? Building trade and construction trade association lists of union contractors were linked to Workplace Safety and Insurance Board claims data for 2006 to 2012. Data were pooled for 2006 to 2012, and negative binomial regressions conducted with adjustment to estimate a union safety effect. The sample included 5797 unionized and 38,626 nonunion construction firms. Total claims rates were 13% higher (1.13, 1.09 to 1.18) in unionized firms because of higher allowed no-lost-time claim rates (1.28, 1.23 to 1.34), whereas the lost-time claims rate was 14% lower (0.86, 0.82 to 0.91). Unionized construction firms compared with nonunion firms have higher no-lost-time and lower lost-time claims rates. Unionized firms may encourage occupational injury reporting and reduce risks through training and hazard identification and control strategies.

Implementation of safety management systems in Hong Kong construction industry - A safety practitioner's perspective.

PubMed

Yiu, Nicole S N; Sze, N N; Chan, Daniel W M

2018-02-01

In the 1980s, the safety management system (SMS) was introduced in the construction industry to mitigate against workplaces hazards, reduce the risk of injuries, and minimize property damage. Also, the Factories and Industrial Undertakings (Safety Management) Regulation was introduced on 24 November 1999 in Hong Kong to empower the mandatory implementation of a SMS in certain industries including building construction. Therefore, it is essential to evaluate the effectiveness of the SMS in improving construction safety and identify the factors that influence its implementation in Hong Kong. A review of the current state-of-the-practice helped to establish the critical success factors (CSFs), benefits, and difficulties of implementing the SMS in the construction industry, while structured interviews were used to establish the key factors of the SMS implementation. Results of the state-of-the-practice review and structured interviews indicated that visible senior commitment, in terms of manpower and cost allocation, and competency of safety manager as key drivers for the SMS implementation. More so, reduced accident rates and accident costs, improved organization framework, and increased safety audit ratings were identified as core benefits of implementing the SMS. Meanwhile, factors such as insufficient resources, tight working schedule, and high labor turnover rate were the key challenges to the effective SMS implementation in Hong Kong. The findings of the study were consistent and indicative of the future development of safety management practice and the sustainable safety improvement of Hong Kong construction industry in the long run. Copyright © 2018 National Safety Council and Elsevier Ltd. All rights reserved.

[Occupational injuries among construction workers in Hong Kong].

PubMed

Huang, Zihui; Chen, Weiqing

2002-02-01

To explore the nature and severity of occupational injuries among construction workers and its risk factors in Hong Kong. One hundred and twenty-two injured construction workers in a public hospital and an equal number of workmate controls were studied. Contents included socio -demographic characteristics, the availability and use of safety equipment, smoking and alcohol consumption, etc. Abbreviated injury scale (AIS) and injury severity score (ISS) were employed for describing the nature, pattern and severity of injuries. Single injuries were seen in 80% of cases. Of 149 injuries classified by body region, 49% were external, 26% involved either the upper or lower extremities, and 11% were spinal injuries. Working at height was associated with the injury severity score. Safety hazards were identified in the work environment in 68% of the cases. Significant odds ratios for accidents were obtained for 'no formal education', 'non safety training' and 'current smokers'. The results implicated that construction was a hazardous occupation in Hong Kong. Improving the work environment and promoting safety education among construction workers would be helpful for minimizing or eliminating occupational injuries in construction occupation in Hong Kong.

Safety Early Warning Research for Highway Construction Based on Case-Based Reasoning and Variable Fuzzy Sets

PubMed Central

Liu, Yan; Xu, Zhen-Jun

2013-01-01

As a high-risk subindustry involved in construction projects, highway construction safety has experienced major developments in the past 20 years, mainly due to the lack of safe early warnings in Chinese construction projects. By combining the current state of early warning technology with the requirements of the State Administration of Work Safety and using case-based reasoning (CBR), this paper expounds on the concept and flow of highway construction safety early warnings based on CBR. The present study provides solutions to three key issues, index selection, accident cause association analysis, and warning degree forecasting implementation, through the use of association rule mining, support vector machine classifiers, and variable fuzzy qualitative and quantitative change criterion modes, which fully cover the needs of safe early warning systems. Using a detailed description of the principles and advantages of each method and by proving the methods' effectiveness and ability to act together in safe early warning applications, effective means and intelligent technology for a safe highway construction early warning system are established. PMID:24191134

Safety early warning research for highway construction based on case-based reasoning and variable fuzzy sets.

PubMed

Liu, Yan; Yi, Ting-Hua; Xu, Zhen-Jun

2013-01-01

As a high-risk subindustry involved in construction projects, highway construction safety has experienced major developments in the past 20 years, mainly due to the lack of safe early warnings in Chinese construction projects. By combining the current state of early warning technology with the requirements of the State Administration of Work Safety and using case-based reasoning (CBR), this paper expounds on the concept and flow of highway construction safety early warnings based on CBR. The present study provides solutions to three key issues, index selection, accident cause association analysis, and warning degree forecasting implementation, through the use of association rule mining, support vector machine classifiers, and variable fuzzy qualitative and quantitative change criterion modes, which fully cover the needs of safe early warning systems. Using a detailed description of the principles and advantages of each method and by proving the methods' effectiveness and ability to act together in safe early warning applications, effective means and intelligent technology for a safe highway construction early warning system are established.

[Classification of Histopathological Findings in the Liver Cited in the Pesticides Risk Assessment Reports Published by the Food Safety Commission of Japan and Thesaurus Construction Based on the International Harmonization of Nomenclature and Diagnostic (INHAND) Criteria].

PubMed

Inoue, Kaoru; Takahashi, Miwa; Umemura, Takashi; Yoshida, Midori

2015-01-01

Histopathological findings are important to the understanding of toxicity profiles of pesticides. The liver is often a target organ of chemicals. In the present study, histopathological findings in the liver cited in the pesticides risk assessment reports published by the Food Safety Commission of Japan were classified. The histopathological findings were obtained in repeated-dose 90-day oral toxicity studies of mice, rats and dogs and carcinogenicity studies of rodents. After the classification, a thesaurus was constructed based on the International Harmonization of Nomenclature and Diagnostic (INHAND) Criteria. We recommend the use of INHAND criteria in risk assessment reports to improve mutual understanding between applicants and risk assessors.

Specification Section 01065S ES&H for Service Contracts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kirsch, Greg C.

2014-07-01

Section Includes: Requirements and guidelines in performance of work concerning protection of environment and property, and the safety and health of Contractors, Sandia National Laboratories (SNL) and Department of Energy (DOE) employees, visitors to SNL, and members of the public. This Section is applicable only to Service Contracts that do not involve construction or construction-like activities. Construction and construction-like activities are covered by Section 01065, Environment, Safety and Health (ES&H) for Construction Contracts. The entire ES&H program shall focus on safe-by-design intent, understanding the technical basis for the work, identifying and controlling energy sources, unacceptable consequences, risk assessments, and positivemore » verification.« less

Do we see how they perceive risk? An integrated analysis of risk perception and its effect on workplace safety behavior.

PubMed

Xia, Nini; Wang, Xueqing; Griffin, Mark A; Wu, Chunlin; Liu, Bingsheng

2017-09-01

While risk perception is a key factor influencing safety behavior, the academia lacks specific attention to the ways that workers perceive risk, and thus little is known about the mechanisms through which different risk perceptions influence safety behavior. Most previous research in the workplace safety domain argues that people tend to perceive risk based on rational formulations of risk criticality. However, individuals' emotions can be also useful in understanding their perceptions. Therefore, this research employs an integrated analysis concerning the rational and emotional perspectives. Specifically, it was expected that the identified three rational ways of perceiving risk, i.e., perceived probability, severity, and negative utility, would influence the direct emotional risk perception. Furthermore, these four risk perceptions were all expected to positively but differently influence safety behavior. The hypotheses were tested using a sample of 120 construction workers. It was found that all the three rational risk perceptions significantly influenced workers' direct perception of risk that is mainly based on emotions. Furthermore, safety behavior among workers relied mainly on emotional perception but not rational calculations of risk. This research contributes to workplace safety research by highlighting the importance of integrating the emotional assessment of risk, especially when workers' risk perception and behavior are concerned. Suggested avenues for improving safety behavior through improvement in risk perception include being aware of the possibility of different ways of perceiving risk, promoting experience sharing and accident simulation, and uncovering risk information. Copyright © 2017 Elsevier Ltd. All rights reserved.

Analysis of perceived risk among construction workers: a cross-cultural study and reflection on the Hofstede model.

PubMed

Martinez-Fiestas, Myriam; Rodríguez-Garzón, Ignacio; Delgado-Padial, Antonio; Lucas-Ruiz, Valeriano

2017-09-01

This article presents a cross-cultural study on perceived risk in the construction industry. Worker samples from three different countries were studied: Spain, Peru and Nicaragua. The main goal was to explain how construction workers perceive their occupational hazard and to analyze how this is related to their national culture. The model used to measure perceived risk was the psychometric paradigm. The results show three very similar profiles, indicating that risk perception is independent of nationality. A cultural analysis was conducted using the Hofstede model. The results of this analysis and the relation to perceived risk showed that risk perception in construction is independent of national culture. Finally, a multiple lineal regression analysis was conducted to determine what qualitative attributes could predict the global quantitative size of risk perception. All of the findings have important implications regarding the management of safety in the workplace.

Perceived safety and controllability of events: Markers of risk for marijuana use in young adults?

PubMed

Sartor, Carolyn E; Ecker, Anthony H; Kraus, Shane W; Leeman, Robert F; Dukes, Kristin N; Foster, Dawn W

2017-03-01

Drawing on constructs from the trauma literature, the current study evaluated perceptions of safety and controllability of events as potential markers of risk for marijuana use. In addition, we characterized these perceptions in relation to individual level substance abuse risk factors (marijuana expectancies, impulsivity, depression, and anxiety), gender, and race. Data were collected via web survey from college students at two northeastern universities (n=228, 82.0% female). Controllability of events (CE) was rated significantly higher by Blacks than Whites. Safety/vulnerability (SV) and CE were associated with impulsivity, depression, and anxiety. CE was also associated with marijuana expectancies. Logistic regression analyses revealed a modest but significant association between SV and lifetime use even after adjusting for race, gender, age, and individual level substance abuse risk factors (odds ratio=1.10, 95% confidence intervals:1.02-1.18). No association between SV and past 3month frequency of use or between CE and either marijuana outcome was found. Findings support a link between perceptions of safety and ever using marijuana. They further demonstrate overlap of both perceived safety and controllability of events with substance use related risk factors, and suggest that they differ by race. Additional studies that assess substance use more broadly and query trauma history, using larger, more diverse samples, are needed to more fully grasp the relevance of these constructs to substance use, including their potential as targets for substance abuse prevention efforts. Copyright © 2016 Elsevier Ltd. All rights reserved.

[Accidents at work in construction workers: a peculiar utilization of the information flow INAIL-ISPESL-Regions].

PubMed

Madeo, G; Giaimo, M

2007-01-01

Indicators generally used to describe the work accident risk, i.e. frequency and injuries severity, are not suitable for comparison among single companies in order to point out those with major risk. We propose a method to draw out construction companies with higher risk of occupational injuries in the period 2003-2005 from INAIL-ISPESL-Regioni database. These companies will be object of specific interventions for the prevention, training and supervision from Prevention and Safety in Working Environments Services, from Provincial Labor Directions and Provincial Territorial Construction Committees.

Finding of No Significant Impact and Finding of No Practicable Alternative: Construction of Visiting Quarters - Phase One and Phase Two MacDill Air Force Base, Florida

DTIC Science & Technology

2011-07-13

the Munitions Storage Area . Although the tree has since succumb to pine beetles, Affected Environment Environmental Assessment for Construction...from Environmental Health Risks and Safety Risks requires Federal agencies, to the extent permitted by law and mission, to identify and assess ...pose a risk to workers or installation personnel. Industrial hygiene programs address Affected Environment Environmental Assessment for

Risk compensation behaviours in construction workers' activities.

PubMed

Feng, Yingbin; Wu, Peng

2015-01-01

The purpose of this study was to test whether the construction workers have the tendency of engaging in risk compensation behaviours, and identify the demographic variables, which may influence the extent to which the construction workers may show risk compensation behaviours. Both quantitative (survey) and qualitative (interviews) approaches were used in this study. A questionnaire survey was conducted with all the construction workers on three building construction sites of a leading construction company in Australia. Semi-structured interviews were then conducted to validate the findings of the quantitative research. The findings indicate that workers tend to show risk compensation behaviours in the construction environment. The workers with more working experience, higher education, or having never been injured at work before have a higher tendency to show risk compensation in their activities than the others. The implication is that contractors need to assess the potential influence of workers' risk compensation behaviours when evaluating the effect of risk control measures. It is recommended that supervisors pay more attention to the behavioural changes of those workers who have more experience, higher education, and have never been injured before after the implementation of new safety control measures on construction site.

Integrated risk management for improving internal traffic control, work-zone safety, and mobility during major construction : tech transfer summary.

DOT National Transportation Integrated Search

2012-10-01

Construction work zones are among the most dangerous places to work in any industry in the world. This is because many factors in construction, such as constant change in working environments and driver errors, contribute to a workplace with a higher...

Understanding causes of fall and struck-by incidents: What differentiates construction safety in the Arabian Gulf region?

PubMed

Fass, Simon; Yousef, Rami; Liginlal, Divakaran; Vyas, Priyanka

2017-01-01

Rapid growth in the Arabian Gulf region has fueled an explosive pace of construction and a rise in risks of occupational injury. Scarcity of pertinent data, however, makes it hard to determine whether accident characteristics, causal factors and remedial interventions identified elsewhere apply to the Gulf in comparable ways. This difficulty stems from unusual construction sector characteristics, notably a heterogeneous mix of expatriate laborers and firms working without a common language, work culture or labor practices. Does this change the mix of accident types or the ranking of main causes and priority remedies? To answer this question, a sample of 519 incident records was analyzed to determine whether accident types and frequencies are comparable to elsewhere. Site safety experts were then interviewed to determine whether rankings of factors and interventions should be similar. Findings are that types are indeed comparable, but the rankings of factors and interventions may not be. Main factors have to do with worker skills and training, experience, use of safety gear and risk perception. The overarching safety issue, however, is that firms and governments do not have strong incentive to address these factors. Copyright © 2016 Elsevier Ltd. All rights reserved.

Relational approach in managing construction project safety: a social capital perspective.

PubMed

Koh, Tas Yong; Rowlinson, Steve

2012-09-01

Existing initiatives in the management of construction project safety are largely based on normative compliance and error prevention, a risk management approach. Although advantageous, these approaches are not wholly successful in further lowering accident rates. A major limitation lies with the approaches' lack of emphasis on the social and team processes inherent in construction project settings. We advance the enquiry by invoking the concept of social capital and project organisational processes, and their impacts on project safety performance. Because social capital is a primordial concept and affects project participants' interactions, its impact on project safety performance is hypothesised to be indirect, i.e. the impact of social capital on safety performance is mediated by organisational processes in adaptation and cooperation. A questionnaire survey was conducted within Hong Kong construction industry to test the hypotheses. 376 usable responses were received and used for analyses. The results reveal that, while the structural dimension is not significant, the mediational thesis is generally supported with the cognitive and relational dimensions affecting project participants' adaptation and cooperation, and the latter two processes affect safety performance. However, the cognitive dimension also directly affects safety performance. The implications of these results for project safety management are discussed. Copyright © 2011 Elsevier Ltd. All rights reserved.

29 CFR Appendix B to Subpart Cc of... - Assembly/Disassembly: Sample Procedures for Minimizing the Risk of Unintended Dangerous Boom...

Code of Federal Regulations, 2011 CFR

2011-07-01

...) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Cranes and Derricks in Construction Pt. 1926, Subpt. CC... risk of unintended dangerous movement while the pins are removed, the A/D director uses an assist crane... place using an assist crane. The A/D director's plan is to keep the boom sections stable while they are...

Construction safety research in the United States: targeting the Hispanic workforce

PubMed Central

Brunette, M

2004-01-01

While it is known that Hispanics have a continuous growing participation in the construction workforce and that their fatal and non-fatal occupational injuries are higher than any other ethnic group, very little construction safety and health research has been conducted in the United States. Research that focuses on safety and health of Hispanic workers employed in the construction industry might prove beneficial in reducing injuries and promoting safe and decent workplaces for all. The purpose of this article was twofold. First, to propose a research agenda where topics such as surveillance, intervention research on high risk occupations, intervention effectiveness evaluation, design and development of effective and appropriate safety training and educational materials, and the socioeconomic impact of injuries and illnesses, are investigated among the Hispanic construction workforce. Second, to present relevant aspects inherent to this particular population that need to be incorporated into the design and development stages of any safety and health research initiative. They include the occupational, social, economic, and cultural background of Hispanic workers; use of a participatory approach, proper selection and use of translation methods; and conducting collaborative research. Certain limitations and challenges related to the availability of resources for conducting safety and health research on Hispanic workers are further discussed. PMID:15314054

Construction safety research in the United States: targeting the Hispanic workforce.

PubMed

Brunette, M J

2004-08-01

While it is known that Hispanics have a continuous growing participation in the construction workforce and that their fatal and non-fatal occupational injuries are higher than any other ethnic group, very little construction safety and health research has been conducted in the United States. Research that focuses on safety and health of Hispanic workers employed in the construction industry might prove beneficial in reducing injuries and promoting safe and decent workplaces for all. The purpose of this article was twofold. First, to propose a research agenda where topics such as surveillance, intervention research on high risk occupations, intervention effectiveness evaluation, design and development of effective and appropriate safety training and educational materials, and the socioeconomic impact of injuries and illnesses, are investigated among the Hispanic construction workforce. Second, to present relevant aspects inherent to this particular population that need to be incorporated into the design and development stages of any safety and health research initiative. They include the occupational, social, economic, and cultural background of Hispanic workers; use of a participatory approach, proper selection and use of translation methods; and conducting collaborative research. Certain limitations and challenges related to the availability of resources for conducting safety and health research on Hispanic workers are further discussed.

Workers' medication as occupational risk at construction site with formworks.

PubMed

López-Arquillos, Antonio; Rubio-Romero, Juan Carlos; López-Arquillos, Concepción

2017-01-01

Accidents in the construction sector are a cause for concern. The influence of many different factors in construction accidents have been studied (age, company size, length of service, deviation, drugs or alcohol consumption, etc.) but the influence of medicinal substances in specific construction activities has not been evaluated until now. The aim of the research presented here is to identify the effect of different medicinal substances on the occupational risk levels of construction activities with formworks. An expert panel was selected in order to quantify the individual risk of each medication for each individual construction activity. Results showed that narcotics, antipsychotics, and hypnotics had the highest risk values, and the use of cranes and cutting materials were considered the most dangerous activities for a medicated worker. Data obtained in this research can help reduce the negative effects of the substances studied on the occupational safety of construction workers. A better knowledge of the risk levels according to the current capabilities of workers under the effects of medication is a powerful tool in planning safer construction activities.

Construction risk assessment of deep foundation pit in metro station based on G-COWA method

NASA Astrophysics Data System (ADS)

You, Weibao; Wang, Jianbo; Zhang, Wei; Liu, Fangmeng; Yang, Diying

2018-05-01

In order to get an accurate understanding of the construction safety of deep foundation pit in metro station and reduce the probability and loss of risk occurrence, a risk assessment method based on G-COWA is proposed. Firstly, relying on the specific engineering examples and the construction characteristics of deep foundation pit, an evaluation index system based on the five factors of “human, management, technology, material and environment” is established. Secondly, the C-OWA operator is introduced to realize the evaluation index empowerment and weaken the negative influence of expert subjective preference. The gray cluster analysis and fuzzy comprehensive evaluation method are combined to construct the construction risk assessment model of deep foundation pit, which can effectively solve the uncertainties. Finally, the model is applied to the actual project of deep foundation pit of Qingdao Metro North Station, determine its construction risk rating is “medium”, evaluate the model is feasible and reasonable. And then corresponding control measures are put forward and useful reference are provided.

Effective information campaign for management of exposure to hand-arm vibration in the metal and construction industries.

PubMed

Sauni, Riitta; Toivio, Pauliina; Esko, Toppila; Pääkkönen, Rauno; Uitti, Jukka

2015-01-01

European Directive 2002/44/EC defines employers' responsibilities in the risk management of hand-arm vibration (HAV). However, the directive is still not completely implemented in all risk industries. The aim of our study was to determine whether it is possible to improve the recognition and management of the risks of HAV at workplaces with a one-year information campaign. A questionnaire on opinions and measures for controlling HAV exposure at workplaces was sent to all occupational safety representatives and occupational safety managers in the construction and metal industry in Finland (n=1887) and once again to those who responded to the first questionnaire (n=961) one year after the campaign. The campaign increased recognition of HAV in risk assessment from 57.0% to 68.3% (p=.001), increased measures to decrease exposure to HAV from 54.6% to 64.2% (p=.006) and increased the number of programmes to control the risks due to HAV (p<.001). The information campaign, which focuses on the construction and metal industries, proved to be effective in increasing the awareness of the risks of HAV and the measures needed to control exposure to HAV. A similar campaign can be recommended in the case of risks specific to certain occupations.

Protection of Workers and Third Parties during the Construction of Linear Structures

NASA Astrophysics Data System (ADS)

Vlčková, Jitka; Venkrbec, Václav; Henková, Svatava; Chromý, Adam

2017-12-01

The minimization of risk in the workplace through a focus on occupational health and safety (OHS) is one of the primary objectives for every construction project. The most serious accidents in the construction industry occur during work on earthworks and linear structures. The character of such structures places them among those posing the greatest threat to the public (referred to as “third parties”). They can be characterized as large structures whose construction may involve the building site extending in a narrow lane alongside previously constructed objects currently in use by the public. Linear structures are often directly connected to existing objects or buildings, making it impossible to guard the whole construction site. However, many OHS problems related to linear structures can be prevented during the design stage. The aim of this article is to introduce a new methodology which has been implemented into a computer program that deals with safety measures at construction sites where work is performed on linear structures. Based on existing experience with the design of such structures and their execution and supervision by safety coordinators, the basic types of linear structures, their location in the terrain, the conditions present during their execution and other marginal conditions and influences were modelled. Basic safety information has been assigned to this elementary information, which is strictly necessary for the construction process. The safety provisions can be grouped according to type, e.g. technical, organizational and other necessary documentation, or into sets of provisions concerning areas such as construction site safety, transport safety, earthworks safety, etc. The selection of the given provisions takes place using multiple criteria. The aim of creating this program is to provide a practical tool for designers, contractors and construction companies. The model can contribute to the sufficient awareness of these participants about technical and organizational provisions that can help them to meet workplace safety requirements. The software for the selection of safety provisions also contains module that can calculate necessary cost estimates using a calculation formula chosen by the user. All software data conform to European standards harmonized for the Czech Republic.

A qualitative investigation of Hispanic construction worker perspectives on factors impacting worksite safety and risk

PubMed Central

2011-01-01

Background Hispanic workers have higher rates of injury and death on construction worksites than workers of other ethnicities. Language barriers and cultural differences have been hypothesized as reasons behind the disparate rates. Methods We conducted two series of focus groups with union and non-union Hispanic construction workers to ask them about their perceptions of the causes for the unequal rates. Spanish transcripts were translated and coded in QSR NVivo software for common themes. Results Workers reported a difficult work environment characterized by supervisor pressure, competition for jobs and intimidation with regard to raising safety concerns. Language barriers or cultural factors were not strongly represented as causative factors behind the rates. Conclusion The results of this study have informed the development of an intervention trial that seeks to prevent falls and silica dust exposure by training contractors employing Hispanic construction workers in the elements of safety leadership, including building respect for their Hispanic workers and facilitating their participation in a safety program. PMID:21962128

Workers' compensation loss prevention representative contact and risk of lost-time injury in construction policyholders.

PubMed

Schofield, Katherine E; Alexander, Bruce H; Gerberich, Susan G; MacLehose, Richard F

2017-09-01

Insurance loss prevention (LP) representatives have access and contact with businesses and employees to provide targeted safety and health resources. Construction firms, especially those smaller in size, are a high-risk population. This research evaluated the association between LP rep contact and risk for lost-time injuries in construction policyholders. Workers' compensation data were utilized to track LP rep contact with policyholders and incidence of lost-time injury over time. Survival analysis with repeated events modeling calculated hazard ratios (HR) and 95% confidence intervals (CI). Compared no LP contact, one contact was associated with a 27% reduction of risk (HR=0.73, CI=0.65-0.82), two with a 41% (HR=0.59, CI=0.51-0.68), and three or more contacts with a 28% reduction of risk (HR=0.72, CI=0.65-0.81). LP reps appear to be a valuable partner in efforts to reduce injury burden. Their presence or contact with policyholders is consistent with reduction in overall incidence of lost-time injuries. Reduction in lost-time injuries, resulting in reduced workers' compensation costs for policyholders and insurance companies, builds a business-case for safety and injury prevention. LP reps are often a low or no-cost benefit for insurance policyholders and may be an important injury prevention resource for small firms and/or those with lack of safety resources and staff. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Health and safety implications of recruitment payments in migrant construction workers

PubMed Central

Hassan, H. A.

2014-01-01

Background The Middle East construction sector is heavily reliant on a migrant workforce that predominantly originates from South Asia. It is common practice for migrant construction workers to pay a local labour recruiter the equivalent of one or more years’ prospective overseas salary to secure employment, work and travel permits and transportation. The occupational health and safety implications of these financial arrangements remain unexplored. Aims To examine associations between payment to a labour recruiter, perceived general health and worksite accidents among migrant construction workers in the Middle East. Methods A questionnaire was completed by a convenience sample of predominantly Indian migrant construction workers drawn from a large construction project. The relationship between payment and risk of poor health and workplace accidents was assessed using multivariate logistic regression models (crude and adjusted for socio-demographic and occupational factors). Results There were 651 participants. The majority (58%) of migrant construction workers had paid a labour recruiter and ~40% had experienced a worksite accident. Between 3% (labourers) and 9% (foremen) perceived their health to be poor. Labourers and skilled workers who had paid a labour recruiter were significantly more likely to have experienced a worksite accident in the previous 12 months. Skilled workers, but not labourers and foremen, who had paid a labour recruiter were at increased risk of poor health. Conclusions The mechanisms linking labour recruiter payments to adverse safety and health outcomes warrant investigation with a view to developing interventions to erode these links. PMID:24668316

Highway construction work zone safety performance and improvement in Louisiana : research project capsule.

DOT National Transportation Integrated Search

2016-08-01

While the number of : crashes in Louisiana : construction work zones : has decreased in recent : years, the total count of : work zone crashes is still : significant, warranting : research into how to reduce : crashes. An assessment : of risk factors...

Fatal falls in the US construction industry, 1990 to 1999.

PubMed

Derr, J; Forst, L; Chen, H Y; Conroy, L

2001-10-01

The Occupational Safety and Health Administration's (OSHA's) Integrated Management Information System (IMIS) database allows for the detailed analysis of risk factors surrounding fatal occupational events. This study used IMIS data to (1) perform a risk factor analysis of fatal construction falls, and (2) assess the impact of the February 1995 29 CFR Part 1926 Subpart M OSHA fall protection regulations for construction by calculating trends in fatal fall rates. In addition, IMIS data on fatal construction falls were compared with data from other occupational fatality surveillance systems. For falls in construction, the study identified several demographic factors that may indicate increased risk. A statistically significant downward trend in fatal falls was evident in all construction and within several construction categories during the decade. Although the study failed to show a statistically significant intervention effect from the new OSHA regulations, it may have lacked the power to do so.

"Wrapping Up" Your Construction Insurance.

ERIC Educational Resources Information Center

Ferraro, Mark

1998-01-01

School facility managers are beginning to use a special insurance-management technique called wrap-up. The project owner purchases a bulk construction insurance policy consisting of general liability, excess liability, workers' compensation, and builders' risk insurance. Wrap-ups ensure competitive pricing, safety incentives, lower claims costs,…

30 CFR 46.11 - Site-specific hazard awareness training.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Section 46.11 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR EDUCATION AND... workers; (4) Customers, including commercial over-the-road truck drivers; (5) Construction workers or... procedures. The training must address site-specific health and safety risks, such as unique geologic or...

Towards a Fuzzy Bayesian Network Based Approach for Safety Risk Analysis of Tunnel-Induced Pipeline Damage.

PubMed

Zhang, Limao; Wu, Xianguo; Qin, Yawei; Skibniewski, Miroslaw J; Liu, Wenli

2016-02-01

Tunneling excavation is bound to produce significant disturbances to surrounding environments, and the tunnel-induced damage to adjacent underground buried pipelines is of considerable importance for geotechnical practice. A fuzzy Bayesian networks (FBNs) based approach for safety risk analysis is developed in this article with detailed step-by-step procedures, consisting of risk mechanism analysis, the FBN model establishment, fuzzification, FBN-based inference, defuzzification, and decision making. In accordance with the failure mechanism analysis, a tunnel-induced pipeline damage model is proposed to reveal the cause-effect relationships between the pipeline damage and its influential variables. In terms of the fuzzification process, an expert confidence indicator is proposed to reveal the reliability of the data when determining the fuzzy probability of occurrence of basic events, with both the judgment ability level and the subjectivity reliability level taken into account. By means of the fuzzy Bayesian inference, the approach proposed in this article is capable of calculating the probability distribution of potential safety risks and identifying the most likely potential causes of accidents under both prior knowledge and given evidence circumstances. A case concerning the safety analysis of underground buried pipelines adjacent to the construction of the Wuhan Yangtze River Tunnel is presented. The results demonstrate the feasibility of the proposed FBN approach and its application potential. The proposed approach can be used as a decision tool to provide support for safety assurance and management in tunnel construction, and thus increase the likelihood of a successful project in a complex project environment. © 2015 Society for Risk Analysis.

Risk factors for injury among construction workers at Denver International Airport.

PubMed

Lowery, J T; Borgerding, J A; Zhen, B; Glazner, J E; Bondy, J; Kreiss, K

1998-08-01

The Denver International Airport construction project provided a rare opportunity to identify risk factors for injury on a large construction project for which 769 contractors were hired to complete 2,843 construction contracts. Workers' compensation claims and payroll data for individual contracts were recorded in an administrative database developed by the project's Owner-Controlled Insurance Program. From claims andy payroll data linked with employee demographic information, we calculated injury rates per 200,000 person-hours by contract and over contract characteristics of interest. We used Poisson regression models to examine contract-specific risk factors in relation to total injuries, lost-work-time (LWT), and non-LWT injuries. We included contract-specific expected loss rates (ELRs) in the model to control for prevailing risk of work and used logistic regression methods to determine the association between LWT and non-LWT injuries on contracts. Injury rates were highest during the first year of construction, at the beginning of contracts, and among older workers. Risk for total and non-LWT injuries was elevated for building construction contracts, contract for special trades companies (SIC 17), contracts with payrolls over $1 million, and those with overtime payrolls greater than 20%. Risk for LWT injuries only was increased for site development contracts and contract starting in the first year of construction. Contracts experiencing one or more minor injuries were four times as likely to have at least one major injury (OR = 4.0, 95% CI (2.9, 5.5)). Enhancement of DIA's safety infrastructure during the second year of construction appears to have been effective in reducing serious (LWT) injures. The absence of correlation between injury rates among contracts belonging to the same company suggest that targeting of safety resources at the level of the contract may be an effective approach to injury prevention. Interventions focused on high-risk contracts, including those with considerable overtime work, contracts held by special trades contractors (SIC 17), and contracts belonging to small and mid-sized companies, and on high-risk workers, such as those new to a construction site or new to a contract may reduce injury burden on large construction sites. The join occurrence of minor and major injuries on a contract level suggests that surveillance of minor injuries may be useful in identifying opportunities for prevention of major injures.

Constructing a Bayesian network model for improving safety behavior of employees at workplaces.

PubMed

Mohammadfam, Iraj; Ghasemi, Fakhradin; Kalatpour, Omid; Moghimbeigi, Abbas

2017-01-01

Unsafe behavior increases the risk of accident at workplaces and needs to be managed properly. The aim of the present study was to provide a model for managing and improving safety behavior of employees using the Bayesian networks approach. The study was conducted in several power plant construction projects in Iran. The data were collected using a questionnaire composed of nine factors, including management commitment, supporting environment, safety management system, employees' participation, safety knowledge, safety attitude, motivation, resource allocation, and work pressure. In order for measuring the score of each factor assigned by a responder, a measurement model was constructed for each of them. The Bayesian network was constructed using experts' opinions and Dempster-Shafer theory. Using belief updating, the best intervention strategies for improving safety behavior also were selected. The result of the present study demonstrated that the majority of employees do not tend to consider safety rules, regulation, procedures and norms in their behavior at the workplace. Safety attitude, safety knowledge, and supporting environment were the best predictor of safety behavior. Moreover, it was determined that instantaneous improvement of supporting environment and employee participation is the best strategy to reach a high proportion of safety behavior at the workplace. The lack of a comprehensive model that can be used for explaining safety behavior was one of the most problematic issues of the study. Furthermore, it can be concluded that belief updating is a unique feature of Bayesian networks that is very useful in comparing various intervention strategies and selecting the best one form them. Copyright © 2016 Elsevier Ltd. All rights reserved.

Key techniques and risk management for the application of the Pile-Beam-Arch (PBA) excavation method: a case study of the Zhongjie subway station.

PubMed

Guan, Yong-ping; Zhao, Wen; Li, Shen-gang; Zhang, Guo-bin

2014-01-01

The design and construction of shallow-buried tunnels in densely populated urban areas involve many challenges. The ground movements induced by tunneling effects pose potential risks to infrastructure such as surface buildings, pipelines, and roads. In this paper, a case study of the Zhongjie subway station located in Shenyang, China, is examined to investigate the key construction techniques and the influence of the Pile-Beam-Arch (PBA) excavation method on the surrounding environment. This case study discusses the primary risk factors affecting the environmental safety and summarizes the corresponding risk mitigation measures and key techniques for subway station construction using the PBA excavation method in a densely populated urban area.

Risk-based approach in valuation of workplace injury rate for transportation and construction industry

NASA Astrophysics Data System (ADS)

Pykhtin, Kirill; Simankina, Tatiana; Sharmanov, Vladimir; Kopytova, Anna

2017-10-01

The danger of injuries and accidents in various industries such as transportation and construction urges the government to control the occupational health and safety more strictly. However, in order to do so with the minimal costs modern risk management tools, have to be implemented. Risk-based approach is an essential tool for competent risk- assessment and used in a great variety of other countries, demonstrating great results in providing of safe working environment. The article describes the problems that the implementation of the method faces in Russia and suggests certain ways to resolve them.

Health and safety implications of recruitment payments in migrant construction workers.

PubMed

Hassan, H A; Houdmont, J

2014-07-01

The Middle East construction sector is heavily reliant on a migrant workforce that predominantly originates from South Asia. It is common practice for migrant construction workers to pay a local labour recruiter the equivalent of one or more years' prospective overseas salary to secure employment, work and travel permits and transportation. The occupational health and safety implications of these financial arrangements remain unexplored. To examine associations between payment to a labour recruiter, perceived general health and worksite accidents among migrant construction workers in the Middle East. A questionnaire was completed by a convenience sample of predominantly Indian migrant construction workers drawn from a large construction project. The relationship between payment and risk of poor health and workplace accidents was assessed using multivariate logistic regression models (crude and adjusted for socio-demographic and occupational factors). There were 651 participants. The majority (58%) of migrant construction workers had paid a labour recruiter and ~40% had experienced a worksite accident. Between 3% (labourers) and 9% (foremen) perceived their health to be poor. Labourers and skilled workers who had paid a labour recruiter were significantly more likely to have experienced a worksite accident in the previous 12 months. Skilled workers, but not labourers and foremen, who had paid a labour recruiter were at increased risk of poor health. The mechanisms linking labour recruiter payments to adverse safety and health outcomes warrant investigation with a view to developing interventions to erode these links. © The Author 2014. Published by Oxford University Press on behalf of the Society of Occupational Medicine.

Improving construction site safety through leader-based verbal safety communication.

PubMed

Kines, Pete; Andersen, Lars P S; Spangenberg, Soren; Mikkelsen, Kim L; Dyreborg, Johnny; Zohar, Dov

2010-10-01

The construction industry is one of the most injury-prone industries, in which production is usually prioritized over safety in daily on-site communication. Workers have an informal and oral culture of risk, in which safety is rarely openly expressed. This paper tests the effect of increasing leader-based on-site verbal safety communication on the level of safety and safety climate at construction sites. A pre-post intervention-control design with five construction work gangs is carried out. Foremen in two intervention groups are coached and given bi-weekly feedback about their daily verbal safety communications with their workers. Foremen-worker verbal safety exchanges (experience sampling method, n=1,693 interviews), construction site safety level (correct vs. incorrect, n=22,077 single observations), and safety climate (seven dimensions, n=105 questionnaires) are measured over a period of up to 42 weeks. Baseline measurements in the two intervention and three control groups reveal that foremen speak with their workers several times a day. Workers perceive safety as part of their verbal communication with their foremen in only 6-16% of exchanges, and the levels of safety at the sites range from 70-87% (correct observations). Measurements from baseline to follow-up in the two intervention groups reveal that safety communication between foremen and workers increases significantly in one of the groups (factor 7.1 increase), and a significant yet smaller increase is found when the two intervention groups are combined (factor 4.6). Significant increases in the level of safety are seen in both intervention groups (7% and 12% increases, respectively), particularly in regards to 'access ways' and 'railings and coverings' (39% and 84% increases, respectively). Increases in safety climate are seen in only one of the intervention groups with respect to their 'attention to safety.' No significant trend changes are seen in the three control groups on any of the three measures. Coaching construction site foremen to include safety in their daily verbal exchanges with workers has a significantly positive and lasting effect on the level of safety, which is a proximal estimate for work-related accidents. It is recommended that future studies include coaching and feedback at all organizational levels and for all involved parties in the construction process. Building client regulations could assign the task of coaching to the client appointed safety coordinators or a manager/supervisor, and studies should measure longitudinal effects of coaching by following foremen and their work gangs from site to site. Copyright © 2010 National Safety Council and Elsevier Ltd. Published by Elsevier Ltd. All rights reserved.

Testing the reliability and validity of a measure of safety climate.

PubMed

Anderson, E; McGovern, P M; Kochevar, L; Vesley, D; Gershon, R

2000-01-01

The lack of compliance with universal precautions (UP) is well documented across a wide variety of healthcare professions and has been reported both before and after the enactment of the Occupational Safety and Health Administration's Bloodborne Pathogens Standard. Gershon, Karkashian, and Felknor (1994) found that several factors correlated significantly with healthcare workers' lack of compliance with UP, including a measure of organizational safety climate (e.g., the employees' perception of their organizational culture and practices regarding safety). We conducted a secondary analysis using data from a cross-sectional survey of a convenience sample of 1,746 healthcare workers at risk of occupational exposure to bloodborne pathogens to assess the validity and reliability of Gershon's measure of safety climate. Findings revealed no relationship between safety climate and employees' gender, age, education, tenure in position, profession, hours worked per day, perceived risk, attitude toward risk, and training. An association was demonstrated between safety climate and (1) healthcare worker compliance with UP and (2) the availability of personal protective equipment, providing support for the construct validity of this measure of safety climate. These findings could be used by occupational health professionals to assess employees' perceptions of the safety culture and practices in the workplace and to guide the institution's risk management efforts in association with U.P.

Occupational Safety and Health and Healthy Housing: A Review of Opportunities and Challenges.

PubMed

Jacobs, David E; Forst, Linda

Occupational safety and health (OSH) risks in construction of healthy housing (HH) have not been examined and collaboration between HH and OSH professionals is inadequate. The World Health Organization is developing international HH guidelines and the International Labour Organization is working to improve OSH in construction globally. We searched for exemplary reports (including gray literature) on construction hazards; preventive measures for occupants and workers; OSH frameworks, laws, and regulations; definitions; and HH. Healthy housing construction typically improves ventilation, moisture and mold, pest control, injury hazards, cleanability, maintenance, accessibility, thermal conditioning, and avoidance of toxic building materials. To date, this work is done without explicit requirements for worker health. Construction is among the most hazardous sectors around the globe, although protective measures are well known, including engineering and administrative controls and provision of personal protective equipment. Residential construction, renovation, repair, and maintenance are fragmented, consisting mostly of small companies without proper OSH training, equipment, and knowledge of HH principles. Residential construction is often undertaken by informal or unauthorized workers, putting them at high risk. Reduced exposure to toxic building materials is an example of a benefit for both workers and occupants if OSH and HH collaboration can be improved. By recognizing that homes under new construction or renovation are both a workplace and a residence, HH and OSH initiatives can apply public health principles to occupants and workers simultaneously. This article publishes key definitions, hazards and interventions common to both fields. A global increase in residential construction and renewed global interest in HH poses both risks and opportunities for primary prevention. Policy and practice interventions can benefit the health of occupants and those who work on their homes. Improvements in legislation, regulation, and international frameworks are needed to maximize OSH and HH collaboration and realize significant cobenefits. Occupational safety and health and HH standards should include requirements to protect both workers and occupants. Because homes can also be workplaces, both workers and housing occupants will receive important cobenefits when OSH and HH standards use proven interventions to protect workers and occupants.

Key Techniques and Risk Management for the Application of the Pile-Beam-Arch (PBA) Excavation Method: A Case Study of the Zhongjie Subway Station

PubMed Central

Guan, Yong-ping; Zhao, Wen; Li, Shen-gang; Zhang, Guo-bin

2014-01-01

The design and construction of shallow-buried tunnels in densely populated urban areas involve many challenges. The ground movements induced by tunneling effects pose potential risks to infrastructure such as surface buildings, pipelines, and roads. In this paper, a case study of the Zhongjie subway station located in Shenyang, China, is examined to investigate the key construction techniques and the influence of the Pile-Beam-Arch (PBA) excavation method on the surrounding environment. This case study discusses the primary risk factors affecting the environmental safety and summarizes the corresponding risk mitigation measures and key techniques for subway station construction using the PBA excavation method in a densely populated urban area. PMID:25221783

Migration and Health in the Construction Industry: Culturally Centering Voices of Bangladeshi Workers in Singapore.

PubMed

Dutta, Mohan J

2017-01-29

Construction workers globally face disproportionate threats to health and wellbeing, constituted by the nature of the work they perform. The workplace fatalities and lost-time injuries experienced by construction workers are significantly greater than in other forms of work. This paper draws on the culture-centered approach (CCA) to dialogically articulate meanings of workplace risks and injuries, voiced by Bangladeshi migrant construction workers in Singapore. The narratives voiced by the participants suggest an ecological approach to workplace injuries in the construction industries, attending to food insecurity, lack of sleep, transportation, etc. as contextual features of work that shape the risks experienced at work. Moreover, participant voices point to the barriers in communication, lack of understanding, and experiences of incivility as features of work that constitute the ways in which they experience injury risks. The overarching discourses of productivity and efficiency constitute a broader climate of threats to worker safety and health.

Discounting the value of safety: effects of perceived risk and effort.

PubMed

Sigurdsson, Sigurdur O; Taylor, Matthew A; Wirth, Oliver

2013-09-01

Although falls from heights remain the most prevalent cause of fatalities in the construction industry, factors impacting safety-related choices associated with work at heights are not completely understood. Better tools are needed to identify and study the factors influencing safety-related choices and decision making. Using a computer-based task within a behavioral economics paradigm, college students were presented a choice between two hypothetical scenarios that differed in working height and effort associated with retrieving and donning a safety harness. Participants were instructed to choose the scenario in which they were more likely to wear the safety harness. Based on choice patterns, switch points were identified, indicating when the perceived risk in both scenarios was equivalent. Switch points were a systematic function of working height and effort, and the quantified relation between perceived risk and effort was described well by a hyperbolic equation. Choice patterns revealed that the perceived risk of working at heights decreased as the effort to retrieve and don a safety harness increased. Results contribute to the development of computer-based procedure for assessing risk discounting within a behavioral economics framework. Such a procedure can be used as a research tool to study factors that influence safety-related decision making with a goal of informing more effective prevention and intervention strategies. Copyright © 2013 National Safety Council and Elsevier Ltd. All rights reserved.

Sun safety in construction: a U.K. intervention study.

PubMed

Houdmont, J; Madgwick, P; Randall, R

2016-01-01

Interventions to promote sun safety in the U.K. construction sector are warranted given the high incidence of skin cancer attributable to sun exposure relative to other occupational groups. To evaluate change in sun safety knowledge and practices among construction workers in response to an educational intervention. A baseline questionnaire was administered, followed by a bespoke sector-specific DVD-based intervention. At 12-month follow-up, participants completed a further questionnaire. Analyses were conducted on a sample of 120 workers (intervention group, n = 70; comparison group, n = 50). At follow-up, the proportion of intervention group participants that reported correct sun safety knowledge was not significantly greater than at baseline. However, the intervention group demonstrated significant positive change on 9 out of 10 behavioural measures, the greatest change being use of a shade/cover when working in the sun followed by regularly checking skin for moles or unusual changes. Exposure to this intervention was linked to some specific positive changes in construction workers' self-reported sun safety practices. These findings highlight the potential for educational interventions to contribute to tackling skin cancer in the UK construction sector. The findings support the development of bespoke educational interventions for other high-risk outdoor worker groups. © The Author 2015. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Investigating ethnic minorities' perceptions of safety climate in the construction industry.

PubMed

Chan, Albert P C; Wong, Francis K W; Hon, Carol K H; Lyu, Sainan; Javed, Arshad Ali

2017-12-01

An increasing number of ethnic minorities (EMs) have been employed in the construction industry to alleviate severe labor shortages in many countries. Unfortunately, statistics show that EMs have higher fatal and non-fatal occupational injury rates than their local counterparts. However, EMs are often underrepresented in safety climate (SC) research as they are difficult to reach and gauge their perception. A positive relationship has been widely found between SC and safety performance. Understanding the safety perceptions of EMs helps to reduce injuries and improve their safety performance. Based on a sample of 320 EMs from 20 companies in the construction industry, exploratory factor analysis (EFA) and confirmatory factor analysis (CFA) were used to identify the SC factors of EMs, and validate the extracted factors, respectively. Multivariate analysis of variance was undertaken to examine mean differences in perceptions of SC by personal characteristics. Three SC factors for EMs encapsulating 16 variables were identified through EFA. The hypothesized CFA model for a three-factor structure derived from EFA showed a satisfactory goodness-of-fit, composite reliability, and construct validity. Three SC factors were identified, namely: (a) safety management commitment, safety resources, and safety communication; (b) employee's involvement and workmate's influence; and (c) perception of safety rules, procedures and risks. The perceptions of SC differed significantly by nationality, marital status, the number of family members supported, and drinking habit. This study reveals the perception of EMs toward SC. The findings highlight the areas for safety improvement and provide leading indicators for safety performance of EMs. The findings are also enlightening for countries with a number of EMs, such as the United Sates, the United Kingdom, Australia, Singapore, and the Middle East. Copyright © 2017. Published by Elsevier Ltd.

Effects of organizational complexity and resources on construction site risk.

PubMed

Forteza, Francisco J; Carretero-Gómez, Jose M; Sesé, Albert

2017-09-01

Our research is aimed at studying the relationship between risk level and organizational complexity and resources on constructions sites. Our general hypothesis is that site complexity increases risk, whereas more resources of the structure decrease risk. A Structural Equation Model (SEM) approach was adopted to validate our theoretical model. To develop our study, 957 building sites in Spain were visited and assessed in 2003-2009. All needed data were obtained using a specific tool developed by the authors to assess site risk, structure and resources (Construction Sites Risk Assessment Tool, or CONSRAT). This tool operationalizes the variables to fit our model, specifically, via a site risk index (SRI) and 10 organizational variables. Our random sample is composed largely of small building sites with general high levels of risk, moderate complexity, and low resources on site. The model obtained adequate fit, and results showed empirical evidence that the factors of complexity and resources can be considered predictors of site risk level. Consequently, these results can help companies, managers of construction and regulators to identify which organizational aspects should be improved to prevent risks on sites and consequently accidents. Copyright © 2017 National Safety Council and Elsevier Ltd. All rights reserved.

Infrastructure stability surveillance with high resolution InSAR

NASA Astrophysics Data System (ADS)

Balz, Timo; Düring, Ralf

2017-02-01

The construction of new infrastructure in largely unknown and difficult environments, as it is necessary for the construction of the New Silk Road, can lead to a decreased stability along the construction site, leading to an increase in landslide risk and deformation caused by surface motion. This generally requires a thorough pre-analysis and consecutive surveillance of the deformation patterns to ensure the stability and safety of the infrastructure projects. Interferometric SAR (InSAR) and the derived techniques of multi-baseline InSAR are very powerful tools for a large area observation of surface deformation patterns. With InSAR and deriver techniques, the topographic height and the surface motion can be estimated for large areas, making it an ideal tool for supporting the planning, construction, and safety surveillance of new infrastructure elements in remote areas.

Critical factors and paths influencing construction workers' safety risk tolerances.

PubMed

Wang, Jiayuan; Zou, Patrick X W; Li, Penny P

2016-08-01

While workers' safety risk tolerances have been regarded as a main reason for their unsafe behaviors, little is known about why different people have different risk tolerances even when confronting the same situation. The aim of this research is to identify the critical factors and paths that influence workers' safety risk tolerance and to explore how they contribute to accident causal model from a system thinking perceptive. A number of methods were carried out to analyze the data collected through interviews and questionnaire surveys. In the first and second steps of the research, factor identification, factor ranking and factor analysis were carried out, and the results show that workers' safety risk tolerance can be influenced by four groups of factors, namely: (1) personal subjective perception; (2) work knowledge and experiences; (3) work characteristics; and (4) safety management. In the third step of the research, hypothetical influencing path model was developed and tested by using structural equation modeling (SEM). It is found that the effects of external factors (safety management and work characteristics) on risk tolerance are larger than that of internal factors (personal subjective perception and work knowledge & experiences). Specifically, safety management contributes the most to workers' safety risk tolerance through its direct effect and indirect effect; while personal subjective perception comes the second and can act as an intermedia for work characteristics. This research provides an in-depth insight of workers' unsafe behaviors by depicting the contributing factors as shown in the accident causal model developed in this research. Copyright © 2015 Elsevier Ltd. All rights reserved.

Use of evidential reasoning and AHP to assess regional industrial safety

PubMed Central

Chen, Zhichao; Chen, Tao; Qu, Zhuohua; Ji, Xuewei; Zhou, Yi; Zhang, Hui

2018-01-01

China’s fast economic growth contributes to the rapid development of its urbanization process, and also renders a series of industrial accidents, which often cause loss of life, damage to property and environment, thus requiring the associated risk analysis and safety control measures to be implemented in advance. However, incompleteness of historical failure data before the occurrence of accidents makes it difficult to use traditional risk analysis approaches such as probabilistic risk analysis in many cases. This paper aims to develop a new methodology capable of assessing regional industrial safety (RIS) in an uncertain environment. A hierarchical structure for modelling the risks influencing RIS is first constructed. The hybrid of evidential reasoning (ER) and Analytical Hierarchy Process (AHP) is then used to assess the risks in a complementary way, in which AHP is hired to evaluate the weight of each risk factor and ER is employed to synthesise the safety evaluations of the investigated region(s) against the risk factors from the bottom to the top level in the hierarchy. The successful application of the hybrid approach in a real case analysis of RIS in several major districts of Beijing (capital of China) demonstrates its feasibility as well as provides risk analysts and safety engineers with useful insights on effective solutions to comprehensive risk assessment of RIS in metropolitan cities. The contribution of this paper is made by the findings on the comparison of risk levels of RIS at different regions against various risk factors so that best practices from the good performer(s) can be used to improve the safety of the others. PMID:29795593

Use of evidential reasoning and AHP to assess regional industrial safety.

PubMed

Chen, Zhichao; Chen, Tao; Qu, Zhuohua; Yang, Zaili; Ji, Xuewei; Zhou, Yi; Zhang, Hui

2018-01-01

China's fast economic growth contributes to the rapid development of its urbanization process, and also renders a series of industrial accidents, which often cause loss of life, damage to property and environment, thus requiring the associated risk analysis and safety control measures to be implemented in advance. However, incompleteness of historical failure data before the occurrence of accidents makes it difficult to use traditional risk analysis approaches such as probabilistic risk analysis in many cases. This paper aims to develop a new methodology capable of assessing regional industrial safety (RIS) in an uncertain environment. A hierarchical structure for modelling the risks influencing RIS is first constructed. The hybrid of evidential reasoning (ER) and Analytical Hierarchy Process (AHP) is then used to assess the risks in a complementary way, in which AHP is hired to evaluate the weight of each risk factor and ER is employed to synthesise the safety evaluations of the investigated region(s) against the risk factors from the bottom to the top level in the hierarchy. The successful application of the hybrid approach in a real case analysis of RIS in several major districts of Beijing (capital of China) demonstrates its feasibility as well as provides risk analysts and safety engineers with useful insights on effective solutions to comprehensive risk assessment of RIS in metropolitan cities. The contribution of this paper is made by the findings on the comparison of risk levels of RIS at different regions against various risk factors so that best practices from the good performer(s) can be used to improve the safety of the others.

[Evaluation of the effectiveness of occupational safety and health inspections of construction sites in the Piedmont region from 2001 to 2005].

PubMed

Bruno, Santina; Bena, Antonella; Debernardi, Maria Luisa; Nava, S; Pastore, Raffaella; Proietti, C; Quarta, D

2009-01-01

To assess the effectiveness of safety inspections in the construction industry in Piedmont in terms of exposure to risk and injuries. We conducted a retrospective analysis of the surveillance activities carried out in Piedmont between 2001 and 2005: to this purpose, we used a logical framework and we identified indicators to evaluate the process and its impact on exposure and injuries. fixed standards involving the number of safety inspections and the type of constructions under control were respected; there was always sufficient diversity among the public works under control, although local health units used different working methods. Impact on exposure and injuries: injury rates in the construction industry in Piedmont showed a decreasing trend and systematically lower values compared to national rates. Injury rates in the "roads and railways" sector showed an increasing trend owing to the great number of public works under construction. In this case, the effect of preventive measures seems less noticeable, but this mainly depends on methodological limits, such as mismatch between numerator and denominator, difficulties in estimating the number of workers actually present on the sites, underreporting of minor events. Despite the limitations of a retrospective analysis, the Piedmont safety inspection programme for the construction industry showed coherence with the objectives and had a positive impact on injury rates.

Chemical Safety Alert: Rupture Hazard of Pressure Vessels

EPA Pesticide Factsheets

Pressure vessels or boilers can fail catastrophically if they are not properly designed, constructed, operated, inspected, tested, or repaired. Risk increases if vessels contents are toxic, corrosive, reactive, or flammable.

Depression is associated with sexual risk among men who have sex with men, but is mediated by cognitive escape and self-efficacy.

PubMed

Alvy, Lisa M; McKirnan, David J; Mansergh, Gordon; Koblin, Beryl; Colfax, Grant N; Flores, Stephen A; Hudson, Sharon

2011-08-01

Men who have sex with men (MSM) show high rates of HIV infection, and higher rates of depression than non-MSM. We examined the association between depression and sexual risk among "high risk" MSM. Evidence has been mixed regarding the link between depression and risky sex, although researchers have rarely considered the role of psychosocial vulnerabilities such as self-efficacy for sexual safety or "escape" coping styles. In a national sample (N = 1,540) of HIV-positive and HIV-negative MSM who reported unprotected sex and drug use with sex partners, we found evidence that depression is related to HIV transmission risk. Self-efficacy for sexual safety and cognitive escape mediated the link between depression and risk behavior, suggesting that psychosocial vulnerability plays an important role in the association of depression with sexual risk. These findings may help us construct more accurate theories regarding depression and sexual behavior, and may inform the design of sexual safety interventions.

Preparing Safety Cases for Operating Outside Prescriptive Fatigue Risk Management Regulations.

PubMed

Gander, Philippa; Mangie, Jim; Wu, Lora; van den Berg, Margo; Signal, Leigh; Phillips, Adrienne

2017-07-01

Transport operators seeking to operate outside prescriptive fatigue management regulations are typically required to present a safety case justifying how they will manage the associated risk. This paper details a method for constructing a successful safety case. The method includes four elements: 1) scope (prescriptive rules and operations affected); 2) risk assessment; 3) risk mitigation strategies; and 4) monitoring ongoing risk. A successful safety case illustrates this method. It enables landing pilots in 3-pilot crews to choose the second or third in-flight rest break, rather than the regulatory requirement to take the third break. Scope was defined using a month of scheduled flights that would be covered (N = 4151). These were analyzed in the risk assessment using existing literature on factors affecting fatigue to estimate the maximum time awake at top of descent and sleep opportunities in each break. Additionally, limited data collected before the new regulations showed that pilots flying at landing chose the third break on only 6% of flights. A prospective survey comparing subjective reports (N = 280) of sleep in the second vs. third break and fatigue and sleepiness ratings at top of descent confirmed that the third break is not consistently superior. The safety case also summarized established systems for fatigue monitoring, risk assessment and hazard identification, and multiple fatigue mitigation strategies that are in place. Other successful safety cases have used this method. The evidence required depends on the expected level of risk and should evolve as experience with fatigue risk management systems builds.Gander P, Mangie J, Wu L, van den Berg M, Signal L, Phillips A. Preparing safety cases for operating outside prescriptive fatigue risk management regulations. Aerosp Med Hum Perform. 2017; 88(7):688-696.

Mapping the nomological network of employee self-determined safety motivation: A preliminary measure in China.

PubMed

Jiang, Li; Tetrick, Lois E

2016-09-01

The present study introduced a preliminary measure of employee safety motivation based on the definition of self-determination theory from Fleming (2012) research and validated the structure of self-determined safety motivation (SDSM) by surveying 375 employees in a Chinese high-risk organization. First, confirmatory factor analysis (CFA) was used to examine the factor structure of SDSM, and indices of five-factor model CFA met the requirements. Second, a nomological network was examined to provide evidence of the construct validity of SDSM. Beyond construct validity, the analysis also produced some interesting results concerning the relationship between leadership antecedents and safety motivation, and between safety motivation and safety behavior. Autonomous motivation was positively related to transformational leadership, negatively related to abusive supervision, and positively related to safety behavior. Controlled motivation with the exception of introjected regulation was negatively related to transformational leadership, positively related to abusive supervision, and negatively related to safety behavior. The unique role of introjected regulation and future research based on self-determination theory were discussed. Copyright © 2016 Elsevier Ltd. All rights reserved.

Framework for continuous assessment and improvement of occupational health and safety issues in construction companies.

PubMed

Mahmoudi, Shahram; Ghasemi, Fakhradin; Mohammadfam, Iraj; Soleimani, Esmaeil

2014-09-01

Construction industry is among the most hazardous industries, and needs a comprehensive and simple-to-administer tool to continuously assess and promote its health and safety performance. Through the study of various standard systems (mainly Health, Safety, and Environment Management System; Occupational Health and Safety Assessment Series 180001; and British Standard, occupational health and safety management systems-Guide 8800), seven main elements were determined for the desired framework, and then, by reviewing literature, factors affecting these main elements were determined. The relative importance of each element and its related factors was calculated at organizational and project levels. The provided framework was then implemented in three construction companies, and results were compared together. THE RESULTS OF THE STUDY SHOW THAT THE RELATIVE IMPORTANCE OF THE MAIN ELEMENTS AND THEIR RELATED FACTORS DIFFER BETWEEN ORGANIZATIONAL AND PROJECT LEVELS: leadership and commitment are the most important elements at the organization level, whereas risk assessment and management are most important at the project level. The present study demonstrated that the framework is easy to administer, and by interpreting the results, the main factors leading to the present condition of companies can be determined.

Effects of a Workplace Intervention Targeting Psychosocial Risk Factors on Safety and Health Outcomes

PubMed Central

Hammer, Leslie B.; Truxillo, Donald M.; Bodner, Todd; Rineer, Jennifer; Pytlovany, Amy C.; Richman, Amy

2015-01-01

The goal of this study was to test the effectiveness of a workplace intervention targeting work-life stress and safety-related psychosocial risk factors on health and safety outcomes. Data were collected over time using a randomized control trial design with 264 construction workers employed in an urban municipal department. The intervention involved family- and safety-supportive supervisor behavior training (computer-based), followed by two weeks of behavior tracking and a four-hour, facilitated team effectiveness session including supervisors and employees. A significant positive intervention effect was found for an objective measure of blood pressure at the 12-month follow-up. However, no significant intervention results were found for self-reported general health, safety participation, or safety compliance. These findings suggest that an intervention focused on supervisor support training and a team effectiveness process for planning and problem solving should be further refined and utilized in order to improve employee health with additional research on the beneficial effects on worker safety. PMID:26557703

Buyer beware: personnel selling nail guns know little about dangerous tools.

PubMed

Lipscomb, Hester J; Nolan, James; Patterson, Dennis; Fullen, Mark; Takacs, Brandon C; Pompeii, Lisa A

2011-08-01

Nail gun use is ubiquitous in wood frame construction. Accessibility and decreasing costs have extended associated occupational hazards to consumers. Compelling evidence documents decreased injury risk among trained users and those with tools with sequential triggers. To prevent inadvertent discharge of nails, this safer trigger requires the nose be depressed before the trigger is pulled to fire. The sequential trigger is not required by the Consumer Product Safety Commission (CPSC) or the Occupational Safety and Health Administration (OSHA) nor are there any guidelines for training. We collected data from personnel at 217 points of sale/rental of framing nail guns in four areas of the country. Sales personnel had little understanding of risks associated with use of framing nail guns. Individuals who had used the tool and those working in construction outlets were more likely to be knowledgeable; even so, less than half understood differences in trigger/actuation systems. Consumers, including contractors purchasing for workers, cannot count on receiving accurate information from sales personnel regarding risks associated with use of these tools. The attitudes and limited knowledge of some sales personnel regarding these potentially deadly tools likely contributes to a culture accepting of injury. The findings demonstrate how influences on the culture of construction are not limited to workers, employers, or the places construction gets done. Copyright © 2011 Wiley-Liss, Inc.

Migration and Health in the Construction Industry: Culturally Centering Voices of Bangladeshi Workers in Singapore

PubMed Central

Dutta, Mohan J.

2017-01-01

Construction workers globally face disproportionate threats to health and wellbeing, constituted by the nature of the work they perform. The workplace fatalities and lost-time injuries experienced by construction workers are significantly greater than in other forms of work. This paper draws on the culture-centered approach (CCA) to dialogically articulate meanings of workplace risks and injuries, voiced by Bangladeshi migrant construction workers in Singapore. The narratives voiced by the participants suggest an ecological approach to workplace injuries in the construction industries, attending to food insecurity, lack of sleep, transportation, etc. as contextual features of work that shape the risks experienced at work. Moreover, participant voices point to the barriers in communication, lack of understanding, and experiences of incivility as features of work that constitute the ways in which they experience injury risks. The overarching discourses of productivity and efficiency constitute a broader climate of threats to worker safety and health. PMID:28146056

Development of the Consumer Refrigerator Safety Questionnaire: A Measure of Consumer Perceptions and Practices.

PubMed

Cairnduff, Victoria; Dean, Moira; Koidis, Anastasios

2016-09-01

Food preparation and storage behaviors in the home deviating from the "best practice" food safety recommendations may result in foodborne illnesses. Currently, there are limited tools available to fully evaluate the consumer knowledge, perceptions, and behavior in the area of refrigerator safety. The current study aimed to develop a valid and reliable tool in the form of a questionnaire, the Consumer Refrigerator Safety Questionnaire (CRSQ), for assessing systematically all these aspects. Items relating to refrigerator safety knowledge (n =17), perceptions (n =46), and reported behavior (n =30) were developed and pilot tested by an expert reference group and various consumer groups to assess face and content validity (n =20), item difficulty and consistency (n =55), and construct validity (n =23). The findings showed that the CRSQ has acceptable face and content validity with acceptable levels of item difficulty. Item consistency was observed for 12 of 15 in refrigerator safety knowledge. Further, all 5 of the subscales of consumer perceptions of refrigerator safety practices relating to risk of developing foodborne disease showed acceptable internal consistency (Cronbach's α value > 0.8). Construct validity of the CRSQ was shown to be very good (P = 0.022). The CRSQ exhibited acceptable test-retest reliability at 14 days with the majority of knowledge items (93.3%) and reported behavior items (96.4%) having correlation coefficients of greater than 0.70. Overall, the CRSQ was deemed valid and reliable in assessing refrigerator safety knowledge and behavior; therefore, it has the potential for future use in identifying groups of individuals at increased risk of deviating from recommended refrigerator safety practices, as well as the assessment of refrigerator safety knowledge and behavior for use before and after an intervention.

Risk management technique for liquefied natural gas facilities

NASA Technical Reports Server (NTRS)

Fedor, O. H.; Parsons, W. N.

1975-01-01

Checklists have been compiled for planning, design, construction, startup and debugging, and operation of liquefied natural gas facilities. Lists include references to pertinent safety regulations. Methods described are applicable to handling of other hazardous materials.

Health and safety implications of alternative energy technologies. II. Solar

NASA Astrophysics Data System (ADS)

Etnier, E. L.; Watson, A. P.

1981-09-01

No energy technology is risk free when all aspects of its utilization are taken into account. Every energy technology has some attendant direct and indirect health and safety concerns. Solar technologies examined in this paper are wind, ocean thermal energy gradients, passive, photovoltaic, satellite power systems, low- and high-temperature collectors, and central power stations, as well as tidal power. For many of these technologies, insufficient historical data are available from which to assess the health risks and environmental impacts. However, their similarities to other projects make certain predictions possible. For example, anticipated problems in worker safety in constructing ocean thermal energy conversion systems will be similar to those associated with other large-scale construction projects, like deep-sea oil drilling platforms. Occupational hazards associated with photovoltaic plant operation would be those associated with normal electricity generation, although for workers involved in the actual production of photovoltaic materials, there is some concern for the toxic effects of the materials used, including silicon, cadmium, and gallium arsenide. Satellite power systems have several unique risks. These include the effects of long-term space travel for construction workers, effects on the ozone layer and the attendant risk of skin cancer in the general public, and the as-yet-undetermined effects of long-term, low-level microwave exposure. Hazards may arise from three sources in solar heating and cooling systems: water contamination from corrosion inhibitors, heat transfer fluids, and bactericides; collector over-heating, fires, and “out-gassing” and handling and disposal of system fluids and wastes. Similar concerns exist for solar thermal power systems. Even passive solar systems may increase indoor exposure levels to various air pollutants and toxic substances, eitherdirectly from the solar system itself or indirectly by trapping released pollutants from furnishings, building materials, and indoor combustion.

How Mandated College Students Talk About Alcohol: Peer Communication Factors Associated with Drinking

PubMed Central

Carey, Kate B.; Lust, Sarah A.; Reid, Allecia E.; Kalichman, Seth C.; Carey, Michael P.

2015-01-01

Relatively little research has examined how peer communication influences alcohol consumption. In a sample of mandated college students, we differentiate conversations about drinking among from conversations about harm prevention and provide evidence for the validity of these communication constructs. Students who violated campus alcohol policies and were referred for alcohol sanctions (N = 345) reported on drinking patterns, use of protective behavioral strategies, perceived descriptive norms for close friends and serving as social leader among their friends; they also reported on the frequency of conversations about drinking, about drinking safety, and about risk reduction efforts. Predicted correlations were found among types of communication and conceptually related variables. General communication was related to consumption but not protective behavioral strategies, whereas safety/risk reduction conversations correlated positively with all protective behavioral strategies. Both types of communication were associated with social leadership. Safety communication moderated the relationship between peer descriptive norms and drinks per week; more frequent talking about safety attenuated the norms-consumption relationship. Peer communication about both drinking and safety may serve as targets for change in risk reduction interventions for mandated college students. PMID:26861808

A novel evaluation method for building construction project based on integrated information entropy with reliability theory.

PubMed

Bai, Xiao-ping; Zhang, Xi-wei

2013-01-01

Selecting construction schemes of the building engineering project is a complex multiobjective optimization decision process, in which many indexes need to be selected to find the optimum scheme. Aiming at this problem, this paper selects cost, progress, quality, and safety as the four first-order evaluation indexes, uses the quantitative method for the cost index, uses integrated qualitative and quantitative methodologies for progress, quality, and safety indexes, and integrates engineering economics, reliability theories, and information entropy theory to present a new evaluation method for building construction project. Combined with a practical case, this paper also presents detailed computing processes and steps, including selecting all order indexes, establishing the index matrix, computing score values of all order indexes, computing the synthesis score, sorting all selected schemes, and making analysis and decision. Presented method can offer valuable references for risk computing of building construction projects.

The impact of occupational health and safety regulations on prevention through design in construction projects: Perspectives from Spain and the United Kingdom.

PubMed

Martínez-Aires, María Dolores; Rubio Gámez, María Carmen; Gibb, Alistair

2015-01-01

Since the mid-1990 s, Prevention through Design (PtD) has become increasingly prevalent in the built environment. The acceptance of PtD has largely been due to the removal or reduction of risks during the execution phase of construction projects. European States have had the added impetus of national legislation. This paper analyzes the influence of European Union Directive 92/57/EEC on occupational safety and health injury prevention in the project design phase. Qualitative methods comprised individual semi-structured interviews and focus groups with a panel of experts. Sixty individuals from construction and related professions (architects, engineers, constructors, developers, and other construction experts) answered 17 key questions to establish national perceptions of the effectiveness of Directive 92/57/EEC in Spain and the United Kingdom (UK). The implementation of PtD in the project design phase in the UK is clearer since the regulations explicitly state the obligations of project designers as well as those of the coordinator. Interviews with Spanish experts show that, in Spain, the prevention culture is less frequently realized. The most significant differences between the European Directive and national regulations which influence PtD are linked to the Health and Safety Coordinator, and Health and Safety documents.

Toward responsible development and effective risk management of nano-enabled products in the U.S. construction industry

NASA Astrophysics Data System (ADS)

West, Gavin H.; Lippy, Bruce E.; Cooper, Michael R.; Marsick, Daniel; Burrelli, Leonard G.; Griffin, Kelsey N.; Segrave, Alan M.

2016-02-01

The global construction sector is experiencing major improvements to building materials used in large quantities through commercial applications of nanotechnology. Nano-enabled construction products hold great promise for energy efficiency and resource conservation, but risk assessments lag as new products emerge. This paper presents results from an inventory, survey, and exposure assessment conducted by the authors and explores these findings in the broader context of evolving research trends and responsible development of nanotechnology. An inventory of 458 reportedly nano-enabled construction products provided insight into product availability, potential exposures, and deficiencies in risk communication that are barriers to adoption of proactive safety measures. Seasoned construction trainers surveyed were largely unaware of the availability of nano-enabled construction products. Exposure assessment demonstrated the effectiveness of ventilation to reduce exposures during mechanical abrasion of photocatalytic tiles containing titanium dioxide (TiO2). Dissociated particles of TiO2 just above the nanoscale (138 nm) were detected in the debris collected during cutting of the tiles, but measurements were below recommended exposure limits for TiO2. Exposure assessments remain scarce, and toxicological understanding primarily pertains to unincorporated nanomaterials; less is known about the occupational risks of nano-enabled construction products across their life cycle. Further research is needed to characterize and quantify exposure to debris released from nanocomposite materials for realistic risk assessment, and to ascertain how nanocomposite matrices, fillers, and degradation forces interact to affect release dynamics. Improving risk communication strategies and implementing safe work practices will cultivate responsible development of nanotechnology in construction, as will multidisciplinary research efforts.

An object-oriented approach to risk and reliability analysis : methodology and aviation safety applications.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dandini, Vincent John; Duran, Felicia Angelica; Wyss, Gregory Dane

2003-09-01

This article describes how features of event tree analysis and Monte Carlo-based discrete event simulation can be combined with concepts from object-oriented analysis to develop a new risk assessment methodology, with some of the best features of each. The resultant object-based event scenario tree (OBEST) methodology enables an analyst to rapidly construct realistic models for scenarios for which an a priori discovery of event ordering is either cumbersome or impossible. Each scenario produced by OBEST is automatically associated with a likelihood estimate because probabilistic branching is integral to the object model definition. The OBEST methodology is then applied to anmore » aviation safety problem that considers mechanisms by which an aircraft might become involved in a runway incursion incident. The resulting OBEST model demonstrates how a close link between human reliability analysis and probabilistic risk assessment methods can provide important insights into aviation safety phenomenology.« less

Waste collection in developing countries - Tackling occupational safety and health hazards at their source

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bleck, Daniela, E-mail: bleck.daniela@baua.bund.de; Wettberg, Wieland, E-mail: wettberg.wieland@baua.bund.de

2012-11-15

Waste management procedures in developing countries are associated with occupational safety and health risks. Gastro-intestinal infections, respiratory and skin diseases as well as muscular-skeletal problems and cutting injuries are commonly found among waste workers around the globe. In order to find efficient, sustainable solutions to reduce occupational risks of waste workers, a methodological risk assessment has to be performed and counteractive measures have to be developed according to an internationally acknowledged hierarchy. From a case study in Addis Ababa, Ethiopia suggestions for the transferral of collected household waste into roadside containers are given. With construction of ramps to dump collectedmore » household waste straight into roadside containers and an adaptation of pushcarts and collection procedures, the risk is tackled at the source.« less

Cost effective management of space venture risks

NASA Technical Reports Server (NTRS)

Giuntini, Ronald E.; Storm, Richard E.

1986-01-01

The development of a model for the cost-effective management of space venture risks is discussed. The risk assessment and control program of insurance companies is examined. A simplified system development cycle which consists of a conceptual design phase, a preliminary design phase, a final design phase, a construction phase, and a system operations and maintenance phase is described. The model incorporates insurance safety risk methods and reliability engineering, and testing practices used in the development of large aerospace and defense systems.

Development of the safety control framework for shield tunneling in close proximity to the operational subway tunnels: case studies in mainland China.

PubMed

Li, Xinggao; Yuan, Dajun

2016-01-01

China's largest cities like Beijing and Shanghai have seen a sharp increase in subway network development as a result of the rapid urbanization in the last decade. The cities are still expanding their subway networks now, and many shield tunnels are being or will be constructed in close proximity to the existing operational subway tunnels. The execution plans for the new nearby shield tunnel construction calls for the development of a safety control framework-a set of control standards and best practices to help organizations manage the risks involved. Typical case studies and relevant key technical parameters are presented with a view to presenting the resulting safety control framework. The framework, created through collaboration among the relevant parties, addresses and manages the risks in a systematic way based on actual conditions of each tunnel crossing construction. The framework consists of six parts: (1) inspecting the operational subway tunnels; (2) deciding allowed movements of the existing tunnels and tracks; (3) simulating effects of the shield tunneling on the existing tunnels; (4) doing preparation work; (5) monitoring design and information management; and (6) measures and activation mechanism of the countermeasures. The six components are explained and demonstrated in detail. In the end, discussions made involve construction and post-construction settlement of the operational tunnel, application of the remedial grouting to rectify excessive settlements of the operational tunnel, and use of the innovative tool of the optical fiber measurement for tunnel movement monitoring. It is concluded that the construction movement of the tunnel can be controlled within 15 mm when the shield machine is <7 m in excavation diameter. The post-construction settlement of the tunnel buried in the very soft ground is much greater than its construction settlement, and last several years until reaching a final stable state. Two cases are outlined to demonstrate the feasibility of using the remedial grouting to reduce the long-term settlement of the operational tunnels. The more and more segmental tunnels being constructed, there is an increasing need of the optical fiber measurement for tunnel movement monitoring in the near future.

A study of trade-specific occupational ergonomics considerations in the U.S. construction industry.

PubMed

Choi, Sang D

2012-01-01

The aim of this survey study was to identify trade-specific ergonomic issues, and discuss practical solutions to reduce work-related musculoskeletal disorders (WMSDs) and injuries in the construction industry. Thirty-two construction firms in the Midwestern United States completed the final survey questionnaire. Twelve different construction skilled trades participated included: general contractor, road, heavy and highway, concrete, electrical, carpentry, landscaping, plumbing, roofing, steel erection, street lighting/traffic signal, and utility construction. Total workforce of the participating companies numbered 11,118 employees. More than 90% of the participants in the survey had a written safety program; however, the majority of the firms did not have a trade-specific ergonomic intervention. The survey revealed that construction constructors perceived safety (worker well-being) as a high priority in their company. This study suggested that construction skilled-trade jobs the construction worker to employ trade-specific hand tools and working body positions that may contribute to different types of WMSD risks, body parts injured, and injury sources. Possible practical construction trade-specific ergonomic solutions might be considered includinge: selection of ergonomic hand tools, reduction of weight of construction materials, and promotion of wellness exercises. This paper may imply that need for more trade-specific ergonomics program elements to help alleviate the work-related musculoskeletal problems in the construction field.

Design of the environment of care for safety of patients and personnel: does form follow function or vice versa in the intensive care unit?

PubMed

Bartley, Judene; Streifel, Andrew J

2010-08-01

We review the context of the environment of care in the intensive care unit setting in relation to patient safety and quality, specifically addressing healthcare-associated infection issues and solutions involving interdisciplinary teams. Issues addressed include current and future architectural design and layout trends, construction trends affecting intensive care units, and prevention of construction-associated healthcare-associated infections related to airborne and waterborne risks and design solutions. Specific elements include single-occupancy, acuity-scalable intensive care unit rooms; environmental aspects of hand hygiene, such as water risks, sink design/location, human waste management, surface selection (floor covering, countertops, furniture, and equipment) and cleaning, antimicrobial-treated or similar materials, ultraviolet germicidal irradiation, specialized rooms (airborne infection isolation and protective environments), and water system design and strategies for safe use of potable water and mitigation of water intrusion. Effective design and operational use of the intensive care unit environment of care must engage critical care personnel from initial planning and design through occupancy of the new/renovated intensive care unit as part of the infection control risk assessment team. The interdisciplinary infection control risk assessment team can address key environment of care design features to enhance the safety of intensive care unit patients, personnel, and visitors. This perspective will ensure the environment of care supports human factors and behavioral aspects of the interaction between the environment of care and its occupants.

[Perception of health and safety risks among workers pathology laboratories].

PubMed

Alvarado-Cabrero, Isabel; Valencia-Cedillo, Raquel

2015-01-01

Health care workers are experiencing increasing numbers of occupational illnesses. Safety practices in anatomical pathology laboratories (APL) are crucial to prevent unnecessary exposures to both chemical and biological agents. The main goal of this study was to determine if pathologists perceptions and actual practice mirror regulatory guidelines. Current available recommendations for APL were reviewed and used to construct an online survey distributed to pathologists. The survey was completed by 121 participants. Eighty-seven (72 %) of respondents reported receiving inadequate safety training. Most pathologists (82 %) were not well-informed about biosafety practices. Sixty-three (52 %) participants felt that the risks of chemical and infectious disease exposures in the APL were low. Most respondents reported having a needle stick or cut (71 %). Eighty-six (71 %) of participants reported musculo skeletal problems. This study indicated that there is a need for improving training in anatomical pathology safety practices in Mexican laboratories as daily practices do not reflected current guidelines.

Interventions to prevent injuries in construction workers.

PubMed

van der Molen, Henk F; Lehtola, Marika M; Lappalainen, Jorma; Hoonakker, Peter L T; Hsiao, Hongwei; Haslam, Roger; Hale, Andrew R; Frings-Dresen, Monique H W; Verbeek, Jos H

2012-12-12

Construction workers are frequently exposed to various types of injury-inducing hazards. A number of injury prevention interventions have been proposed, yet their effectiveness is uncertain. To assess the effects of interventions to prevent injuries in construction workers. We searched the Cochrane Injuries Group's specialised register, CENTRAL, MEDLINE, EMBASE, PsycINFO, OSH-ROM (including NIOSHTIC and HSELINE), Scopus, Web of Science and EI Compendex to September 2011. The searches were not restricted by language or publication status. The reference lists of relevant papers and reviews were also searched. Randomised controlled trials, controlled before-after (CBA) studies and interrupted time series (ITS) of all types of interventions for preventing fatal and non-fatal injuries among workers at construction sites. Two review authors independently selected studies, extracted data and assessed study quality. For ITS, we re-analysed the studies and used an initial effect, measured as the change in injury-rate in the year after the intervention, as well as a sustained effect, measured as the change in time trend before and after the intervention. Thirteen studies, 12 ITS and one CBA study met the inclusion criteria. The ITS evaluated the effects of the introduction or change of regulations (N = 7), a safety campaign (N = 2), a drug-free workplace programme (N = 1), a training programme (N = 1), and safety inspections (N = 1) on fatal and non-fatal occupational injuries. One CBA study evaluated the introduction of occupational health services such as risk assessment and health surveillance.The overall risk of bias among the included studies was high as it was uncertain for the ITS studies whether the intervention was independent from other changes and thus could be regarded as the main reason of change in the outcome.The regulatory interventions at national or branch level showed a small but significant initial and sustained increase in fatal (effect sizes of 0.79; 95% confidence interval (CI) 0.00 to 1.58) and non-fatal injuries (effect size 0.23; 95% CI 0.03 to 0.43).The safety campaign intervention resulted in a decrease in injuries at the company level but an increase at the regional level. Training interventions, inspections or the introduction of occupational health services did not result in a significant reduction of non-fatal injuries in single studies.A multifaceted drug-free workplace programme at the company level reduced non-fatal injuries in the year following implementation by -7.6 per 100 person-years (95% CI -11.2 to -4.0) and in the years thereafter by -2.0 per 100 person-years per year (95% CI -3.5 to -0.5). The vast majority of technical, human and organisational interventions that are recommended by standard texts of safety, consultants and safety courses have not been adequately evaluated. There is no evidence that introducing regulations for reducing fatal and non-fatal injuries are effective as such. There is neither evidence that regionally oriented safety campaigns, training, inspections nor the introduction of occupational health services are effective at reducing non-fatal injuries in construction companies. There is low-quality evidence that company-oriented safety interventions such as a multifaceted safety campaign and a multifaceted drug workplace programme can reduce non-fatal injuries among construction workers. Additional strategies are needed to increase the compliance of employers and workers to the safety measures that are prescribed by regulation. Continuing company-oriented interventions among management and construction workers, such as a targeted safety campaign or a drug-free workplace programme, seem to have an effect in reducing injuries in the longer term.

Interventions to prevent injuries in construction workers.

PubMed

van der Molen, Henk F; Basnet, Prativa; Hoonakker, Peter Lt; Lehtola, Marika M; Lappalainen, Jorma; Frings-Dresen, Monique Hw; Haslam, Roger; Verbeek, Jos H

2018-02-05

Construction workers are frequently exposed to various types of injury-inducing hazards. There are a number of injury prevention interventions, yet their effectiveness is uncertain. To assess the effects of interventions for preventing injuries in construction workers. We searched the Cochrane Injuries Group's specialised register, CENTRAL (issue 3), MEDLINE, Embase and PsycINFO up to April 2017. The searches were not restricted by language or publication status. We also handsearched the reference lists of relevant papers and reviews. Randomised controlled trials, controlled before-after (CBA) studies and interrupted time-series (ITS) of all types of interventions for preventing fatal and non-fatal injuries among workers at construction sites. Two review authors independently selected studies, extracted data and assessed their risk of bias. For ITS studies, we re-analysed the studies and used an initial effect, measured as the change in injury rate in the year after the intervention, as well as a sustained effect, measured as the change in time trend before and after the intervention. Seventeen studies (14 ITS and 3 CBA studies) met the inclusion criteria in this updated version of the review. The ITS studies evaluated the effects of: introducing or changing regulations that laid down safety and health requirements for the construction sites (nine studies), a safety campaign (two studies), a drug-free workplace programme (one study), a training programme (one study), and safety inspections (one study) on fatal and non-fatal occupational injuries. One CBA study evaluated the introduction of occupational health services such as risk assessment and health surveillance, one evaluated a training programme and one evaluated the effect of a subsidy for upgrading to safer scaffoldings. The overall risk of bias of most of the included studies was high, as it was uncertain for the ITS studies whether the intervention was independent from other changes and thus could be regarded as the main reason of change in the outcome. Therefore, we rated the quality of the evidence as very low for all comparisons.Compulsory interventionsRegulatory interventions at national or branch level may or may not have an initial effect (effect size (ES) of -0.33; 95% confidence interval (CI) -2.08 to 1.41) and may or may not have a sustained effect (ES -0.03; 95% CI -0.30 to 0.24) on fatal and non-fatal injuries (9 ITS studies) due to highly inconsistent results (I² = 98%). Inspections may or may not have an effect on non-fatal injuries (ES 0.07; 95% CI -2.83 to 2.97; 1 ITS study).Educational interventionsSafety training interventions may result in no significant reduction of non-fatal injuries (1 ITS study and 1 CBA study).Informational interventionsWe found no studies that had evaluated informational interventions alone such as campaigns for risk communication.Persuasive interventionsWe found no studies that had evaluated persuasive interventions alone such as peer feedback on workplace actions to increase acceptance of safe working methods.Facilitative interventionsMonetary subsidies to companies may lead to a greater decrease in non-fatal injuries from falls to a lower level than no subsidies (risk ratio (RR) at follow-up: 0.93; 95% CI 0.30 to 2.91 from RR 3.89 at baseline; 1 CBA study).Multifaceted interventionsA safety campaign intervention may result in an initial (ES -1.82; 95% CI -2.90 to -0.74) and sustained (ES -1.30; 95% CI -1.79 to -0.81) decrease in injuries at the company level (1 ITS study), but not at the regional level (1 ITS study). A multifaceted drug-free workplace programme at the company level may reduce non-fatal injuries in the year following implementation by -7.6 per 100 person-years (95% CI -11.2 to -4.0) and in the years thereafter by -2.0 per 100 person-years (95% CI -3.5 to -0.5) (1 ITS study). Introducing occupational health services may result in no decrease in fatal or non-fatal injuries (one CBA study). The vast majority of interventions to adopt safety measures recommended by standard texts on safety, consultants and safety courses have not been adequately evaluated. There is very low-quality evidence that introducing regulations as such may or may not result in a decrease in fatal and non-fatal injuries. There is also very low-quality evidence that regionally oriented safety campaigns, training, inspections or the introduction of occupational health services may not reduce non-fatal injuries in construction companies. There is very low-quality evidence that company-oriented safety interventions such as a multifaceted safety campaign, a multifaceted drug workplace programme and subsidies for replacement of scaffoldings may reduce non-fatal injuries among construction workers. More studies, preferably cluster-randomised controlled trials, are needed to evaluate different strategies to increase the employers' and workers' adherence to the safety measures prescribed by regulation.

Fuzzy approach for reducing subjectivity in estimating occupational accident severity.

PubMed

Pinto, Abel; Ribeiro, Rita A; Nunes, Isabel L

2012-03-01

Quantifying or, more generally, estimating the severity of the possible consequences of occupational accidents is a decisive step in any occupational risk assessment process. Because of the lack of historic information (accident data collection and recording are incipient and insufficient, particularly in construction) and the lack of practical tools in the construction industry, the estimation/quantification of occupational accident severity is a notably arbitrary process rather than a systematic and rigorous assessment. This work proposes several severity functions (based on a safety risk assessment) to represent biomechanical knowledge with the aim of determining the severity level of occupational accidents in the construction industry and, consequently, improving occupational risk assessment quality. We follow a fuzzy approach because it makes it possible to capture and represent imprecise knowledge in a simple and understandable way for users and specialists. Copyright © 2011 Elsevier Ltd. All rights reserved.

Investigating the multi-causal and complex nature of the accident causal influence of construction project features.

PubMed

Manu, Patrick A; Ankrah, Nii A; Proverbs, David G; Suresh, Subashini

2012-09-01

Construction project features (CPFs) are organisational, physical and operational attributes that characterise construction projects. Although previous studies have examined the accident causal influence of CPFs, the multi-causal attribute of this causal phenomenon still remain elusive and thus requires further investigation. Aiming to shed light on this facet of the accident causal phenomenon of CPFs, this study examines relevant literature and crystallises the attained insight of the multi-causal attribute by a graphical model which is subsequently operationalised by a derived mathematical risk expression that offers a systematic approach for evaluating the potential of CPFs to cause harm and consequently their health and safety (H&S) risk implications. The graphical model and the risk expression put forth by the study thus advance current understanding of the accident causal phenomenon of CPFs and they present an opportunity for project participants to manage the H&S risk associated with CPFs from the early stages of project procurement. Copyright © 2011 Elsevier Ltd. All rights reserved.

Safety voice for ergonomics (SAVE) project: protocol for a workplace cluster-randomized controlled trial to reduce musculoskeletal disorders in masonry apprentices.

PubMed

Kincl, Laurel D; Anton, Dan; Hess, Jennifer A; Weeks, Douglas L

2016-04-27

Masons have the highest rate of overexertion injuries among all construction trades and rank second for occupational back injuries in the United States. Identified ergonomic solutions are the primary method of reducing exposure to risk factors associated with musculoskeletal disorders. However, many construction workers lack knowledge about these solutions, as well as basic ergonomic principles. Construction apprentices, as they embark on their careers, are greatly in need of ergonomics training to minimize the cumulative exposure that leads to musculoskeletal disorders. Apprentices receive safety training; however, ergonomics training is often limited or non-existent. In addition, apprenticeship programs often lack "soft skills" training on how to appropriately respond to work environments and practices that are unsafe. The SAVE program - SAfety Voice for Ergonomics - strives to integrate evidence-based health and safety training strategies into masonry apprenticeship skills training to teach ergonomics, problem solving, and speaking up to communicate solutions that reduce musculoskeletal injury risk. The central hypothesis is that the combination of ergonomics training and safety voice promotion will be more effective than no training or either ergonomics training alone or safety voice training alone. Following the development and pilot testing of the SAVE intervention, SAVE will be evaluated in a cluster-randomized controlled trial at 12 masonry training centers across the U.S. Clusters of apprentices within centers will be assigned at random to one of four intervention groups (n = 24 per group): (1) ergonomics training only, (2) safety voice training only, (3) combined ergonomics and safety voice training, or (4) control group with no additional training intervention. Outcomes assessed at baseline, at the conclusion of training, and then at six and 12 months post training will include: musculoskeletal symptoms, general health perceptions, knowledge of ergonomic and safety voice principles, and perception and attitudes about ergonomic and safety voice issues. Masons continue to have a high rate of musculoskeletal disorders. The trade has an expected increase of 40 % in the number of workers by 2020. Therefore, a vetted intervention for apprentices entering the trade, such as SAVE, could reduce the burden of musculoskeletal disorders currently plaguing the trade. ClinicalTrials.gov Identifier: NCT02676635 , 2 February 2016.

Study on Communication System of Social Risk Information on Nuclear Energy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hidekazu Yoshikawa; Toshio Sugiman; Yasunaga Wakabayashi

2004-07-01

As a new risk communication method for the construction of effective knowledge bases about 'safety and non-anxiety for nuclear energy', a study on new communication method of social risk information by means of electronic communication has been started, by noticing rapid expansion of internet usage in the society. The purpose of this research is to enhance the public acceptance to nuclear power in Japan by the following two aspects. The first is to develop the mutual communication system among the working persons involved in both the operation and maintenance activities for nuclear power plant, by which they will exchange theirmore » daily experiences to improve the safety conscious activities to foster 'safety culture' attitude. The other is the development of an effective risk communication system between nuclear society and the general publics about the hot issues of 'what are the concerned involved in the final disposal of high-level radioactive waste?' and 'what should we do to have social consensus to deal with this issue in future'. The authors' research plan for the above purpose is summarized as shown in Table 1. As the first step of the authors' three year research project which started from August 2003, social investigation by questionnaires by internet and postal mail, have been just recently conducted on their risk perception for the nuclear power for the people engaged in nuclear business and women in the metropolitan area, respectively, in order to obtain the relevant information on how and what should be considered for constructing effective risk communication methods of social risk information between the people within nuclear industries and the general public in society. Although there need to be discussed, the contrasting risk images as shown in Fig.1, can be depicted between the nuclear people and general public these days in Japan, from the results of the social investigation. As the conclusion of the authors' study thus far conducted, the contrasting risk perceptions by both the nuclear people and the general public which are shown in Fig. 1, will contribute to the authors' development of two risk communication systems as the next step of this research project, the one for 'Community network system to foster safety culture among nuclear workers', while the other for 'Affective risk communication network open to society'. (authors)« less

Nuclear-safety institution in France: emergence and development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vallet, B.M.

1986-01-01

This research work examines the social construction of the nuclear-safety institution in France, and the concurrent increased focus on the nuclear-risk issue. Emphasis on risk and safety, as primarily technical issues, can partly be seen as a strategy. Employed by power elites in the nuclear technostructure, this diverts emphasis away from controversial and normative questions regarding the political and social consequences of technology to questions of technology that appear to be absolute to the technology itself. Nuclear safety, which started from a preoccupation with risk related to the nuclear energy research and development process, is examined using the analytic conceptmore » of field. As a social arena patterned to achieve specific tasks, this field is dominated by a body of state engineers recognized to have high-level scientific and administrative competences. It is structured by procedures and administrative hierarchies as well as by technical rules, norms, and standards. These are formalized and rationalized through technical, economic, political, and social needs; over time; they consolidate the field into an institution. The study documents the nuclear-safety institution as an integral part of the nuclear technostructure, which has historically used the specificity of its expertise as a buffer against outside interference.« less

Dealing with low-incidence serious diseases in general practice

PubMed Central

Buntinx, Frank; Mant, David; Van den Bruel, Ann; Donner-Banzhof, Norbert; Dinant, Geert-Jan

2011-01-01

Cost-effective health care depends on high-quality triage. The most challenging aspect of triage, which GPs confront on a regular basis, is diagnosing rare but serious disease. Failure to shoulder any risk in this situation overloads the health system and subjects patients to unnecessary investigation. Adopting too high a risk threshold leads to missed cases, late diagnosis, and sometimes avoidable death. It also undermines the credibility of primary care practitioners. Quantification of diagnostic risk suggests there is a potential risk gap between the maximum certainty with which GPs can assess the risk of serious disease at presentation and the minimum certainty required by many health systems for further investigation or hospital referral. Physician gut-feeling and diagnostic safety netting are often employed to fill the gap. Neither strategy is well defined or well supported by evidence. It should be possible to reduce the diagnostic risk gap cost-effectively by adopting more explicit diagnostic algorithms and providing better GP access to new diagnostic technologies. It is also essential, given the decreasing experience of triage clinicians employed in a number of countries, that a teachable evidence base is constructed for gut feeling and diagnostic safety netting. However, this construction of an evidence base requires very large-scale studies, and the global primary care research community remains small. The challenge therefore needs to be met by urgent and effective international collaboration. PMID:21401991

Safety in ready mixed concrete industry: descriptive analysis of injuries and development of preventive measures.

PubMed

Akboğa, Özge; Baradan, Selim

2017-02-07

Ready mixed concrete (RMC) industry, one of the barebones of construction sector, has its distinctive occupational safety and health (OSH) risks. Employees experience risks that emerge during the fabrication of concrete, as well as its delivery to the construction site. Statistics show that usage and demand of RMC have been increasing along with the number of producers and workers. Unfortunately, adequate OSH measures to meet this rapid growth are not in place even in top RMC producing countries, such as Turkey. Moreover, lack of statistical data and academic research in this sector exacerbates this problem. This study aims to fill this gap by conducting data mining in Turkish Social Security Institution archives and performing univariate frequency and cross tabulation analysis on 71 incidents that RMC truck drivers were involved. Also, investigations and interviews were conducted in seven RMC plants in Turkey and Netherlands with OSH point of view. Based on the results of this research, problem areas were determined such as; cleaning truck mixer/pump is a hazardous activity where operators get injured frequently, and struck by falling objects is a major hazard at RMC industry. Finally, Job Safety Analyses were performed on these areas to suggest mitigation methods.

“This is Our Sanctuary”: Perceptions of Safety among Exotic Dancers in Baltimore, Maryland

PubMed Central

Lilleston, Pamela; Reuben, Jacqueline; Sherman, Susan G.

2012-01-01

Occupational safety researchers have increasingly recognized the important influence of social and structural factors on safety perception and behaviours in occupational settings. This qualitative study was conducted to explore the nature of the safety climate of exotic dance clubs in Baltimore, Maryland and the mechanisms through which this sexual geography informs dancers’ perceptions of safety and experience of sex work. Structured observations and semi-structured qualitative interviews (N=40) were conducted with club dancers, doormen, managers, and bartenders from May through August, 2009. Data were analyzed using an inductive approach whereby themes emerged from the data itself. Atlas-ti was used for data analysis. Perceptions of safety within exotic dance clubs were born from an interplay between the physical, social, and symbolic environments. These perceptions were closely tied to dancers’ construction of sex work inside versus outside of the club. Understanding the contextual factors, which influence how dancers understand and prioritize risk in their work settings, is crucial for creating policies and programs, which effectively reduce risk in this environment. PMID:22361635

Perceived safety climate, job demands, and coworker support among union and nonunion injured construction workers.

PubMed

Gillen, Marion; Baltz, Davis; Gassel, Margy; Kirsch, Luz; Vaccaro, Diane

2002-01-01

This study evaluated injured construction workers' perceptions of workplace safety climate, psychological job demands, decision latitude, and coworker support, and the relationship of these variables to the injury severity sustained by the workers. Injury severity was assessed using the Health Assessment Questionnaire (HAQ), which evaluates functional limitations. Worker perceptions of workplace variables were determined by two instruments: (a) the Safety Climate Measure for Construction Sites and (b) the Job Content Questionnaire (JCQ). The overall model explained 23% of the variance in injury severity, with unique contributions provided by union status, the Safety Climate Score, and Psychological Job Demands. A positive significant correlation was found between injury severity and the Safety Climate Scores (r = .183, P = .003), and between the Safety Climate Scores and union status (r = .225, P < .001). There were statistically significant differences between union and nonunion workers' responses regarding perceived safety climate on 5 of the 10 safety climate items. Union workers were more likely than nonunion workers to: (a) perceive their supervisors as caring about their safety; (b) be made aware of dangerous work practices; (c) have received safety instructions when hired; (d) have regular job safety meetings; and (e) perceive that taking risks was not a part of their job. However, with regard to the 49-item JCQ, which includes Coworker Support, the responses between union and nonunion workers were very similar, indicating an overall high degree of job satisfaction. However, workers who experienced their workplace as more safe also perceived the level of management (r = -.55, P < .001) and coworker (r = -.31, P < .001) support as being higher. The findings of this study underscore the critical need for construction managers to alert workers to dangerous work practices and conditions more frequently, and express concern and praise workers for safe work in a manner that is culturally acceptable in this industry. Workplace interventions that decrease the incidence and severity of injuries, but that are flexible enough to meet a variety of potentially competing imperatives, such as production deadlines and client demands, need to be identified.

Path forward: emerging issues and challenges.

PubMed

Gillen, Matt; Gittleman, Janie L

2010-06-01

The NIOSH Construction Program worked with industry stakeholders to develop a National Occupational Safety and Health Construction Agenda to target future research and activities. The Program and its partners are also cognizant that new developments can emerge over time and that research can play an important role in helping to understand and address these emerging issues. Examples of emerging issues relevant to construction safety and health are described. These include: (a) climate change and energy considerations; (b) green construction developments and opportunities; (c) new materials; (d) changes in industry structure and practice; (e) workforce developments and disparities; (f) injury underreporting and cost and risk shifting; and (g) increased interest in addressing root causes. Responding to emerging issues while maintaining a focus on fundamental longstanding issues represents an ongoing challenge for researchers and industry organizations. Additional research to understand the diffusion and adoption of research by the industry is also needed. Research accomplished to date provides a strong foundation for addressing future industry needs and trends. (c) 2010 Elsevier Ltd. All rights reserved.

Risk Perception Analysis Related To Existing Dams In Italy

NASA Astrophysics Data System (ADS)

Solimene, Pellegrino

2013-04-01

In the first part of this work, the progress of Italian National Rules about dams design, construction and operation are presented to highlight the strong connection existing between the promulgation of new decrees, as a consequence of a dam accidents, and the necessity to prevent further loss of lives and goods downstream. Following the Gleno Dam failure (1923), a special Ministerial Committee wrote out the first Regulations and made the proposal to establish, within the High Council of Public Works, a special department that become soon the "Dam Service", with the tasks of control and supervision about construction and operation phases of the dams and their reservoirs. A different definition of tasks and the structure of Dam Service were provided in accordance with law n° 183/1989, which transferred all the technical services to the Office of the Prime Minister; the aim was to join the Dam Office with the Department for National Technical Services, with the objective of increasing the knowledge of the territory and promoting the study on flood propagation downstream in case of operations on bottom outlet or hypothetical dam-break. In fact, population living downstream is not ready to accept any amount of risk because has not a good knowledge of the efforts of experts involved in dam safety, both from the operators and from the safety Authority. So it's important to optimize all the activities usually performed in a dam safety program and improve the emergency planning as a response to people's primary needs and feeling about safety from Civil Protection Authority. In the second part of the work, a definition of risk is provided as the relationship existing between probability of occurrence and loss, setting out the range within to plan for prevention (risk mitigation), thanks to the qualitative assessment of the minimum safety level that is suited to assign funds to plan for Civil Protection (loss mitigation). The basic meaning of the reliability of a zoned earthfill dam is illustrated by defining the risk analysis during its construction and operation. A qualitative "Event Tree Analysis" makes clear with an example the probability of occurrence of the events triggered by an earthquake, and leads to a classification of the damage level. Finally, a System Dynamics (SD) approach is presented to investigate possibilities of a preventive planning in relationship to the risk, so that it's possible to establish shared procedures to achieve the correct management in any crisis phase. As a qualitative result of a SD application, figure 1 presents a flow-chart about a case study on the same dam so to illustrate the emergency planning in a step by step procedure according to the Regulations.

Safety Evaluation Report for the Claiborne Enrichment Center, Homer, Louisiana (Docket No. 70-3070)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-01-01

This report documents the US Nuclear Regulatory Commission (NRC) staff review and safety evaluation of the Louisiana Energy Services, L.P. (LES, the applicant) application for a license to possess and use byproduct, source, and special nuclear material and to enrich natural uranium to a maximum of 5 percent U-235 by the gas centrifuge process. The plant, to be known as the Claiborne Enrichment Center (CEC), would be constructed near the town of Homer in Claiborne Parish, Louisiana. At full production in a given year, the plant will receive approximately 4,700 tonnes of feed UF{sub 6} and produce 870 tonnes ofmore » low-enriched UF{sub 6}, and 3,830 tonnes of depleted UF{sub 6} tails. Facility construction, operation, and decommissioning are expected to last 5, 30, and 7 years, respectively. The objective of the review is to evaluate the potential adverse impacts of operation of the facility on worker and public health and safety under both normal operating and accident conditions. The review also considers the management organization, administrative programs, and financial qualifications provided to assure safe design and operation of the facility. The NRC staff concludes that the applicant`s descriptions, specifications, and analyses provide an adequate basis for safety review of facility operations and that construction and operation of the facility does not pose an undue risk to public health and safety.« less

Organizational Culture and Safety

NASA Technical Reports Server (NTRS)

Adams, Catherine A.

2003-01-01

'..only a fool perseveres in error.' Cicero. Humans will break the most advanced technological devices and override safety and security systems if they are given the latitude. Within the workplace, the operator may be just one of several factors in causing accidents or making risky decisions. Other variables considered for their involvement in the negative and often catastrophic outcomes include the organizational context and culture. Many organizations have constructed and implemented safety programs to be assimilated into their culture to assure employee commitment and understanding of the importance of everyday safety. The purpose of this paper is to examine literature on organizational safety cultures and programs that attempt to combat vulnerability, risk taking behavior and decisions and identify the role of training in attempting to mitigate unsafe acts.

Fall Prevention in Apprentice Carpenters

PubMed Central

Kaskutas, Vicki; Dale, Ann Marie; Lipscomb, Hester; Gaal, John; Fuchs, Mark; Evanoff, Bradley; Faucette, Julia; Gillen, Marion; Deych, Elena

2013-01-01

Objectives Falls from heights are a leading cause of mortality and morbidity in the construction industry, especially among inexperienced workers. We surveyed apprentice carpenters to identify individual and organizational factors associated with falls from heights. Methods We developed a 72-item fall prevention survey with multiple domains including fall experience, fall prevention knowledge, risk perceptions, confidence in ability to prevent falls, training experience, and perceptions of the safety climate and crew safety behaviors. We administered the questionnaire to apprentice carpenters in this cross-sectional study. Results Of the 1,025 respondents, 51% knew someone who had fallen from height at work and 16% had personally fallen in the past year, with ladders accounting for most of the falls. Despite participation in school-based and on-the-job training, fall prevention knowledge was poor. Ladders were perceived as low risk and ladder training was rare. Apprentices reported high levels of unsafe fall-related behaviors on their work crews. Apprentices working residential construction were more likely to fall than those working commercial construction, as were apprentices working on crews with fewer senior carpenters to provide mentorship, and those reporting more unsafe behaviors among fellow workers. Conclusions Despite participation in a formal apprenticeship program, many apprentices work at heights without adequate preparation and subsequently experience falls. Apprenticeship programs can improve the timing and content of fall prevention training. This study suggests that organizational changes in building practices, mentorship, and safety culture must also occur in order to decrease worker falls from heights. PMID:19953214

Fatal occupational injuries in the Malaysian construction sector–causes and accidental agents

NASA Astrophysics Data System (ADS)

Ayob, A.; Shaari, A. A.; Zaki, M. F. M.; Munaaim, M. A. C.

2018-04-01

The construction sector is associated with various accidents and fatal injuries. These occupational accidents are caused by numerous factors, such as lack of supervision; lack of adherence to safe work technique; failure to wear personal protective equipment; and failure to comply with the safe use of tools, vehicles, and machines. Using 2013–2016 secondary data from the Department of Occupational Safety and Health and Social Security Organization, this study conducted a descriptive exploration survey to identify common fatal occupational injuries associated with the Malaysian construction sector, as well as their causes and accidental agents. Results indicated that construction, followed by manufacturing, agriculture, forestry, logging, and fishery, are the riskiest job sectors in Malaysia. The highest incidences of occupational casualties were reported in Sarawak, Johor, and Selangor. These states accounted for approximately 13.33% to 18.18% of all cases of fatal occupational accidents. In these states, the lack of safety and health regulations and poor execution of risk management increased the risk of occupational accidents. Falls from heights accounted for 46.28% of fatal occupational injuries. Furthermore, being crushed by objects, materials, or vehicles accounted for 9.09% to 17.36% of fatal occupational injuries. Substandard work environment and transportation and lifting equipment, such as scaffolds, are primary accidental agents. Results of this study could enhance the knowledge and awareness of construction workers and management of job-related injuries to decrease the incidence of fatal occupational accidents.

The Relationship Between Hospital Construction and High-Risk Infant Auditory Function at NICU Discharge: A Retrospective Descriptive Cohort Study.

PubMed

Willis, Valerie

2018-04-01

To describe the difference in auditory function at neonatal intensive care unit (NICU) discharge between high-risk infant cases exposed to hospital construction during NICU stay and those not exposed. Noise produced by routine NICU caregiving exceeds recommended intensity. As California hospitals undergo construction to meet seismic safety regulations, vulnerable neonates are potentially exposed to even higher levels of noise. Ramifications are unknown. Retrospective data-based descriptive cohort design was used to compare high-risk infant auditory function at NICU discharge between hospital construction exposed and unexposed groups. N = 540 infant cases (243 construction exposed and 297 unexposed controls). Infant cases born and discharged from the study site NICU in the year 2010 (unexposed) and year 2015 (exposed) and received a newborn hearing screening by automated auditory brainstem evoked response (ABER) prior to discharge with results reported. Infant cases excluded: hearing screen results by ABER unavailable, potentially confounding characteristics (congenital infection, major anomalies including cleft lip and/or palate), and transferred into or out of the study site. ABER. descriptive statistics (SPSS Version 24.0), hypothesis testing, correlation, and logistic regression. The difference in auditory function at NICU discharge between high-risk infant cases exposed to hospital construction noise and those unexposed was statistically insignificant, χ 2 = 1.666, df = 4, p = .1968, 95% confidence interval [-0.635, 2.570]. More research is needed to better understand whether hospital construction exposure during NICU admission negatively affects high-risk infant auditory function. Findings may catalyze theory development, future research, and child health policy.

OCCUPATIONAL SAFETY AND HEALTH IN DISASTER RESTORATION ACTIVITY AFTER SOME MAJOR EARTHQUAKES

NASA Astrophysics Data System (ADS)

Toyosawa, Yasuo; Itoh, Kazuya; Kikkawa, Naotaka

Occupational safety and health in disaster restoration activity following the Great Hanshin Earthquake (1995), Niigata Chuetsu Earthquake (2004), Niigata Chuetsu-oki Earthquake (2007) Great East Japan Earthquake (2011) were analyzed and characterized in order to raise awareness on the risks and hazards in such work. In this scenario, the predominant type of accident is a "fall" which increases mainly due to the fact that labourers are working to repair houses and buildings. On the other hand, landslides were prevalent in the Niigata Chuetsu Earthquake, resulting in more accidents occurring during geotechnical works rather than in buildings construction works. In the abnormal conditions that characterize recovery activities, when safety and health measures have a tendency to be neglected, it is important to reinstate adequate measures as soon as possible by carrying out the usial risk assessments.

Searching for needles in a haystack: identifying innovations to prevent MSDs in the construction sector.

PubMed

Kramer, Desre M; Bigelow, Philip L; Carlan, Niki; Wells, Richard P; Garritano, Enzo; Vi, Peter; Plawinski, Marek

2010-07-01

This study identified innovations that could potentially reduce the risk of MSDs in the construction sector. The action research approach was based on a collaborative model of researchers working with workplace representatives. We searched for innovations being used by construction companies. From a potential database of 125 innovations, the study focused on 20 innovations that varied in their penetration into worksites in the geographical area, represented a variety of trades, and were a cross-section of tools and work organizational processes. It examined the attributes of the innovations, and the barriers to their adoption. The analysis was based on observations of workers, surveys of workers and construction-safety consultants, and company interviews. The study found that innovations were adopted by companies for multiple advantages including productivity and quality, but not necessarily ability to reduce MSD risks, their non-complexity, and cost. The major barriers for adoption were the traditional culture of the construction sector rather than financial ones. Copyright 2010 Elsevier Ltd. All rights reserved.

Prevention through Design Adoption Readiness Model (PtD ARM): An integrated conceptual model.

PubMed

Weidman, Justin; Dickerson, Deborah E; Koebel, Charles T

2015-01-01

Prevention through Design (PtD), eliminating hazards at the design-stage of tools and systems, is the optimal method of mitigating occupational health and safety risks. A recent National Institute of Safety and Health initiative has established a goal to increase adoption of PtD innovation in industry. The construction industry has traditionally lagged behind other sectors in the adoption of innovation, in general; and of safety and health prevention innovation, in particular. Therefore, as a first step toward improving adoption trends in this sector, a conceptual model was developed to describe the parameters and causal relationships that influence and predict construction stakeholder "adoption readiness" for PtD technology innovation. This model was built upon three well-established theoretical frameworks: the Health Belief Model, the Diffusion of Innovation Model, and the Technology Acceptance Model. Earp and Ennett's model development methodology was employed to build a depiction of the key constructs and directionality and magnitude of relationships among them. Key constructs were identified from the literature associated with the three theoretical frameworks, with special emphasis given to studies related to construction or OHS technology adoption. A conceptual model is presented. Recommendations for future research are described and include confirmatory structural equation modeling of model parameters and relationships, additional descriptive investigation of barriers to adoption in some trade sectors, and design and evaluation of an intervention strategy.

An overview of safety assessment, regulation, and control of hazardous material use at NREL

NASA Astrophysics Data System (ADS)

Nelson, B. P.; Crandall, R. S.; Moskowitz, P. D.; Fthenakis, V. M.

1992-12-01

This paper summarizes the methodology we use to ensure the safe use of hazardous materials at the National Renewable Energy Laboratory (NREL). First, we analyze the processes and the materials used in those processes to identify the hazards presented. Then we study federal, state, and local regulations and apply the relevant requirements to our operations. When necessary, we generate internal safety documents to consolidate this information. We design research operations and support systems to conform to these requirements. Before we construct the systems, we perform a semiquantitative risk analysis on likely accident scenarios. All scenarios presenting an unacceptable risk require system or procedural modifications to reduce the risk. Following these modifications, we repeat the risk analysis to ensure that the respective accident scenarios present an acceptable risk. Once all risks are acceptable, we conduct an operational readiness review (ORR). A management-appointed panel performs the ORR ensuring compliance with all relevant requirements. After successful completion of the ORR, operations can begin.

Participatory Training to Improve Safety and Health in Small Construction Sites in Some Countries in Asia: Development and Application of the WISCON Training Program.

PubMed

Kawakami, Tsuyoshi

2016-08-01

A participatory training program, Work Improvement in Small Construction Sites, was developed to provide practical support measures to the small construction sector. Managers and workers from selected small sites were interviewed about their occupational safety and health risks. The Work Improvement in Small Construction Sites training program comprised a 45-item action checklist, photos, and illustrations showing local examples and group work methods. Pilot training workshops were carried out with workers and employers in Cambodia, Laos, Mongolia, Thailand, and Vietnam. Participants subsequently planned, and using locally available low-cost materials, implemented their own improvements such as hand-made hand trucks to carry heavy materials, removal of projecting nails from timber materials, and fences to protect roof workers from falling. Local Work Improvement in Small Construction Sites trainers consisting of government officials, workers, employers, and nongovernment organization representatives were then trained to implement the Work Improvement in Small Construction Sites training widely. Keys to success were easy-to-apply training tools aiming at immediate, low-cost improvements, and collaboration with various local people's networks. © The Author(s) 2016.

Results of a community-based survey of construction safety climate for Hispanic workers.

PubMed

Marin, Luz S; Cifuentes, Manuel; Roelofs, Cora

2015-01-01

Hispanic construction workers experience high rates of occupational injury, likely influenced by individual, organizational, and social factors. To characterize the safety climate of Hispanic construction workers using worker, contractor, and supervisor perceptions of the workplace. We developed a 40-item interviewer-assisted survey with six safety climate dimensions and administered it in Spanish and English to construction workers, contractors, and supervisors. A safety climate model, comparing responses and assessing contributing factors was created based on survey responses. While contractors and construction supervisors' (n = 128) scores were higher, all respondents shared a negative perception of safety climate. Construction workers had statistically significantly lower safety climate scores compared to supervisors and contractors (30·6 vs 46·5%, P<0·05). Safety climate scores were not associated with English language ability or years lived in the United States. We found that Hispanic construction workers in this study experienced a poor safety climate. The Hispanic construction safety climate model we propose can serve as a framework to guide organizational safety interventions and evaluate safety climate improvements.

Results of a community-based survey of construction safety climate for Hispanic workers

PubMed Central

Marin, Luz S; Cifuentes, Manuel; Roelofs, Cora

2015-01-01

Background: Hispanic construction workers experience high rates of occupational injury, likely influenced by individual, organizational, and social factors. Objectives: To characterize the safety climate of Hispanic construction workers using worker, contractor, and supervisor perceptions of the workplace. Methods: We developed a 40-item interviewer-assisted survey with six safety climate dimensions and administered it in Spanish and English to construction workers, contractors, and supervisors. A safety climate model, comparing responses and assessing contributing factors was created based on survey responses. Results: While contractors and construction supervisors’ (n = 128) scores were higher, all respondents shared a negative perception of safety climate. Construction workers had statistically significantly lower safety climate scores compared to supervisors and contractors (30.6 vs 46.5%, P<0.05). Safety climate scores were not associated with English language ability or years lived in the United States. Conclusions: We found that Hispanic construction workers in this study experienced a poor safety climate. The Hispanic construction safety climate model we propose can serve as a framework to guide organizational safety interventions and evaluate safety climate improvements. PMID:26145454

Impact of individual resilience and safety climate on safety performance and psychological stress of construction workers: A case study of the Ontario construction industry.

PubMed

Chen, Yuting; McCabe, Brenda; Hyatt, Douglas

2017-06-01

The construction industry has hit a plateau in terms of safety performance. Safety climate is regarded as a leading indicator of safety performance; however, relatively little safety climate research has been done in the Canadian construction industry. Safety climate may be geographically sensitive, thus it is necessary to examine how the construct of safety climate is defined and used to improve safety performance in different regions. On the other hand, more and more attention has been paid to job related stress in the construction industry. Previous research proposed that individual resilience may be associated with a better safety performance and may help employees manage stress. Unfortunately, few empirical research studies have examined this hypothesis. This paper aims to examine the role of safety climate and individual resilience in safety performance and job stress in the Canadian construction industry. The research was based on 837 surveys collected in Ontario between June 2015 and June 2016. Structural equation modeling (SEM) techniques were used to explore the impact of individual resilience and safety climate on physical safety outcomes and on psychological stress among construction workers. The results show that safety climate not only affected construction workers' safety performance but also indirectly affected their psychological stress. In addition, it was found that individual resilience had a direct negative impact on psychological stress but had no impact on physical safety outcomes. These findings highlight the roles of both organizational and individual factors in individual safety performance and in psychological well-being. Construction organizations need to not only monitor employees' safety performance, but also to assess their employees' psychological well-being. Promoting a positive safety climate together with developing training programs focusing on improving employees' psychological health - especially post-trauma psychological health - can improve the safety performance of an organization. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Psychometrics of the Home Safety Self-Assessment Tool (HSSAT) to prevent falls in community-dwelling older adults.

PubMed

Tomita, Machiko R; Saharan, Sumandeep; Rajendran, Sheela; Nochajski, Susan M; Schweitzer, Jo A

2014-01-01

OBJECTIVE. To identify psychometric properties of the Home Safety Self-Assessment Tool (HSSAT) to prevent falls in community-dwelling older adults. METHOD. We tested content validity, test-retest reliability, interrater reliability, construct validity, convergent and discriminant validity, and responsiveness to change. RESULTS. The content validity index was .98, the intraclass correlation coefficient for test-retest reliability was .97, and the interrater reliability was .89. The difference on identified risk factors between the use and nonuse of the HSSAT was significant (p = .005). Convergent validity with the Centers for Disease Control and Prevention Home Safety Checklist was high (r = .65), and discriminant validity with fear of falling was very low (r = .10). The responsiveness to change was moderate (standardized response mean = 0.57). CONCLUSION. The HSSAT is a reliable and valid instrument to identify fall risks in a home environment, and the HSSAT booklet is effective as educational material leading to improvement in home safety. Copyright © 2014 by the American Occupational Therapy Association, Inc.

A review of models relevant to road safety.

PubMed

Hughes, B P; Newstead, S; Anund, A; Shu, C C; Falkmer, T

2015-01-01

It is estimated that more than 1.2 million people die worldwide as a result of road traffic crashes and some 50 million are injured per annum. At present some Western countries' road safety strategies and countermeasures claim to have developed into 'Safe Systems' models to address the effects of road related crashes. Well-constructed models encourage effective strategies to improve road safety. This review aimed to identify and summarise concise descriptions, or 'models' of safety. The review covers information from a wide variety of fields and contexts including transport, occupational safety, food industry, education, construction and health. The information from 2620 candidate references were selected and summarised in 121 examples of different types of model and contents. The language of safety models and systems was found to be inconsistent. Each model provided additional information regarding style, purpose, complexity and diversity. In total, seven types of models were identified. The categorisation of models was done on a high level with a variation of details in each group and without a complete, simple and rational description. The models identified in this review are likely to be adaptable to road safety and some of them have previously been used. None of systems theory, safety management systems, the risk management approach, or safety culture was commonly or thoroughly applied to road safety. It is concluded that these approaches have the potential to reduce road trauma. Copyright © 2014 Elsevier Ltd. All rights reserved.

77 FR 22381 - Odorant Fade in Railroad Tank Cars

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-13

... can lead to the loss of odorant. 4. Facilities that load odorized LPG into tank cars take any other... diminished levels of odorant or no odorant present, represents significant safety risks. Absent sufficient... the LPG in the storage tanks at the construction site had virtually no odorant present, explaining why...

Use of limited data to construct Bayesian networks for probabilistic risk assessment.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Groth, Katrina M.; Swiler, Laura Painton

2013-03-01

Probabilistic Risk Assessment (PRA) is a fundamental part of safety/quality assurance for nuclear power and nuclear weapons. Traditional PRA very effectively models complex hardware system risks using binary probabilistic models. However, traditional PRA models are not flexible enough to accommodate non-binary soft-causal factors, such as digital instrumentation&control, passive components, aging, common cause failure, and human errors. Bayesian Networks offer the opportunity to incorporate these risks into the PRA framework. This report describes the results of an early career LDRD project titled %E2%80%9CUse of Limited Data to Construct Bayesian Networks for Probabilistic Risk Assessment%E2%80%9D. The goal of the work was tomore » establish the capability to develop Bayesian Networks from sparse data, and to demonstrate this capability by producing a data-informed Bayesian Network for use in Human Reliability Analysis (HRA) as part of nuclear power plant Probabilistic Risk Assessment (PRA). This report summarizes the research goal and major products of the research.« less

Analysis of factors influencing safety management for metro construction in China.

PubMed

Yu, Q Z; Ding, L Y; Zhou, C; Luo, H B

2014-07-01

With the rapid development of urbanization in China, the number and size of metro construction projects are increasing quickly. At the same time, and increasing number of accidents in metro construction make it a disturbing focus of social attention. In order to improve safety management in metro construction, an investigation of the participants' perspectives on safety factors in China metro construction has been conducted to identify the key safety factors, and their ranking consistency among the main participants, including clients, consultants, designers, contractors and supervisors. The result of factor analysis indicates that there are five key factors which influence the safety of metro construction including safety attitude, construction site safety, government supervision, market restrictions and task unpredictability. In addition, ANOVA and Spearman rank correlation coefficients were performed to test the consistency of the means rating and the ranking of safety factors. The results indicated that the main participants have significant disagreement about the importance of safety factors on more than half of the items. Suggestions and recommendations on practical countermeasures to improve metro construction safety management in China are proposed. Copyright © 2013 Elsevier Ltd. All rights reserved.

NSR&D Program Fiscal Year (FY) 2015 Call for Proposals Mitigation of Seismic Risk at Nuclear Facilities using Seismic Isolation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coleman, Justin

2015-02-01

Seismic isolation (SI) has the potential to drastically reduce seismic response of structures, systems, or components (SSCs) and therefore the risk associated with large seismic events (large seismic event could be defined as the design basis earthquake (DBE) and/or the beyond design basis earthquake (BDBE) depending on the site location). This would correspond to a potential increase in nuclear safety by minimizing the structural response and thus minimizing the risk of material release during large seismic events that have uncertainty associated with their magnitude and frequency. The national consensus standard America Society of Civil Engineers (ASCE) Standard 4, Seismic Analysismore » of Safety Related Nuclear Structures recently incorporated language and commentary for seismically isolating a large light water reactor or similar large nuclear structure. Some potential benefits of SI are: 1) substantially decoupling the SSC from the earthquake hazard thus decreasing risk of material release during large earthquakes, 2) cost savings for the facility and/or equipment, and 3) applicability to both nuclear (current and next generation) and high hazard non-nuclear facilities. Issue: To date no one has evaluated how the benefit of seismic risk reduction reduces cost to construct a nuclear facility. Objective: Use seismic probabilistic risk assessment (SPRA) to evaluate the reduction in seismic risk and estimate potential cost savings of seismic isolation of a generic nuclear facility. This project would leverage ongoing Idaho National Laboratory (INL) activities that are developing advanced (SPRA) methods using Nonlinear Soil-Structure Interaction (NLSSI) analysis. Technical Approach: The proposed study is intended to obtain an estimate on the reduction in seismic risk and construction cost that might be achieved by seismically isolating a nuclear facility. The nuclear facility is a representative pressurized water reactor building nuclear power plant (NPP) structure. Figure 1: Project activities The study will consider a representative NPP reinforced concrete reactor building and representative plant safety system. This study will leverage existing research and development (R&D) activities at INL. Figure 1 shows the proposed study steps with the steps in blue representing activities already funded at INL and the steps in purple the activities that would be funded under this proposal. The following results will be documented: 1) Comparison of seismic risk for the non-seismically isolated (non-SI) and seismically isolated (SI) NPP, and 2) an estimate of construction cost savings when implementing SI at the site of the generic NPP.« less

[What Surgeons Should Know about Risk Management].

PubMed

Strametz, R; Tannheimer, M; Rall, M

2017-02-01

Background: The fact that medical treatment is associated with errors has long been recognized. Based on the principle of "first do no harm", numerous efforts have since been made to prevent such errors or limit their impact. However, recent statistics show that these measures do not sufficiently prevent grave mistakes with serious consequences. Preventable mistakes such as wrong patient or wrong site surgery still frequently occur in error statistics. Methods: Based on insight from research on human error, in due consideration of recent legislative regulations in Germany, the authors give an overview of the clinical risk management tools needed to identify risks in surgery, analyse their causes, and determine adequate measures to manage those risks depending on their relevance. The use and limitations of critical incident reporting systems (CIRS), safety checklists and crisis resource management (CRM) are highlighted. Also the rationale for IT systems to support the risk management process is addressed. Results/Conclusion: No single tool of risk management can be effective as a standalone instrument, but unfolds its effect only when embedded in a superordinate risk management system, which integrates tailor-made elements to increase patient safety into the workflows of each organisation. Competence in choosing adequate tools, effective IT systems to support the risk management process as well as leadership and commitment to constructive handling of human error are crucial components to establish a safety culture in surgery. Georg Thieme Verlag KG Stuttgart · New York.

Highway Repair: A New Silicosis Threat

PubMed Central

Valiante, David J.; Schill, Donald P.; Rosenman, Kenneth D.; Socie, Edward

2004-01-01

Objectives. We describe an emerging public health concern regarding silicosis in the fast-growing highway repair industry. Methods. We examined highway construction trends, silicosis surveillance case data, and environmental exposure data to evaluate the risk of silicosis among highway repair workers. We reviewed silicosis case data from the construction industry in 3 states that have silicosis registries, and we conducted environmental monitoring for silica at highway repair work sites. Results. Our findings indicate that a large population of highway workers is at risk of developing silicosis from exposure to crystalline silica. Conclusions. Exposure control methods, medical screenings, protective health standards, and safety-related contract language are necessary for preventing future occupational disease problems among highway repair workers. PMID:15117715

Safety in ready mixed concrete industry: descriptive analysis of injuries and development of preventive measures

PubMed Central

AKBOĞA, Özge; BARADAN, Selim

2016-01-01

Ready mixed concrete (RMC) industry, one of the barebones of construction sector, has its distinctive occupational safety and health (OSH) risks. Employees experience risks that emerge during the fabrication of concrete, as well as its delivery to the construction site. Statistics show that usage and demand of RMC have been increasing along with the number of producers and workers. Unfortunately, adequate OSH measures to meet this rapid growth are not in place even in top RMC producing countries, such as Turkey. Moreover, lack of statistical data and academic research in this sector exacerbates this problem. This study aims to fill this gap by conducting data mining in Turkish Social Security Institution archives and performing univariate frequency and cross tabulation analysis on 71 incidents that RMC truck drivers were involved. Also, investigations and interviews were conducted in seven RMC plants in Turkey and Netherlands with OSH point of view. Based on the results of this research, problem areas were determined such as; cleaning truck mixer/pump is a hazardous activity where operators get injured frequently, and struck by falling objects is a major hazard at RMC industry. Finally, Job Safety Analyses were performed on these areas to suggest mitigation methods. PMID:27524105

Safety climate and the distracted driving experiences of truck drivers.

PubMed

Swedler, David I; Pollack, Keshia M; Agnew, Jacqueline

2015-07-01

For truck drivers, distracted driving is a workplace behavior that increases occupational injury risk. We propose safety climate as an appropriate lens through which researchers can examine occupational distracted driving. Using a mixed methods study design, we surveyed truck drivers using the Safety Climate Questionnaire (SCQ) complemented by semi-structured interviews of experts on distracted driving and truck safety. Safety climate was assessed by using the entire SCQ as an overall climate score, followed by factor analysis that identified the following safety climate factors: Communications and Procedures; Management Commitment; and Work Pressure. In multivariate regression, the overall safety climate scale was associated with having ever experienced a crash and/or distraction-involved swerving. Interview participants described how these SCQ constructs could affect occupational distracted driving. To reduce distraction-related crashes in their organizations, management can adhere to safe policies and procedures, invest in engineering controls, and develop safer communication procedures. © 2015 Wiley Periodicals, Inc.

Environment, Health, and Safety - Construction Subcontractors Documents |

Science.gov Websites

NREL Environment, Health, and Safety - Construction Subcontractors Documents Environment , Health, and Safety - Construction Subcontractors Documents The purpose of this page is to ensure NREL Environment, Health and Safety (EH&S) requirements are understood by construction subcontractors and

Relationships among Safety Climate, Safety Behavior, and Safety Outcomes for Ethnic Minority Construction Workers.

PubMed

Lyu, Sainan; Hon, Carol K H; Chan, Albert P C; Wong, Francis K W; Javed, Arshad Ali

2018-03-09

In many countries, it is common practice to attract and employ ethnic minority (EM) or migrant workers in the construction industry. This primarily occurs in order to alleviate the labor shortage caused by an aging workforce with a lack of new entrants. Statistics show that EM construction workers are more likely to have occupational fatal and nonfatal injuries than their local counterparts; however, the mechanism underlying accidents and injuries in this vulnerable population has been rarely examined. This study aims to investigate relationships among safety climate, safety behavior, and safety outcomes for EM construction workers. To this end, a theoretical research model was developed based on a comprehensive review of the current literature. In total, 289 valid questionnaires were collected face-to-face from 223 Nepalese construction workers and 56 Pakistani construction workers working on 15 construction sites in Hong Kong. Structural equation modelling was employed to validate the constructs and test the hypothesized model. Results show that there were significant positive relationships between safety climate and safety behaviors, and significant negative relationships between safety behaviors and safety outcomes for EM construction workers. This research contributes to the literature regarding EM workers by providing empirical evidence of the mechanisms by which safety climate affects safety behaviors and outcomes. It also provides insights in order to help the key stakeholders formulate safety strategies for EM workers in many areas where numerous EM workers are employed, such as in the U.S., the UK, Australia, Singapore, Malaysia, and the Middle East.

Methodology for an occupational risk assessment: an evaluation of four processes for the fabrication of photovoltaic cells.

PubMed

Ungers, L J; Moskowitz, P D; Owens, T W; Harmon, A D; Briggs, T M

1982-02-01

Determining occupational health and safety risks posed by emerging technologies is difficult because of limited statistics. Nevertheless, estimates of such risks must be constructed to permit comparison of various technologies to identify the most attractive processes. One way to estimate risks is to use statistics on related industries. Based on process labor requirements and associated occupational health data, risks to workers and to society posed by an emerging technology can be calculated. Using data from the California semiconductor industry, this study applies a five-step occupational risk assessment procedure to four processes for the fabrication of photovoltaic cells. The validity of the occupational risk assessment method is discussed.

Effectiveness of the HomeSafe Pilot Program in reducing injury rates among residential construction workers, 1994-1998.

PubMed

Darragh, Amy Rowntree; Stallones, Lorann; Bigelow, Phillip L; Keefe, Thomas J

2004-02-01

The construction industry typically has one of the highest fatal and non-fatal injury rates compared with other industries. Residential construction workers are at particular risk of injury (work is in remote sites with small crews, there are often many subcontractors, and they have limited access to safety programs). Difficulty accessing information specific to this group has made research more challenging, therefore, there are few studies. This study evaluated the effectiveness of the HomeSafe Pilot Program, a safety education and training program designed to reduce injuries among residential construction workers. Researchers evaluated whether overall and severe injury incidence rates declined during the intervention period. Data were analyzed using incidence rates and Poisson regression to control for the effect of antecedent secular trend. Injury incidence rates declined significantly following HomeSafe; however, this effect was not statistically significant once temporal variation was controlled. The decline in injury rates following HomeSafe cannot be attributed solely to HomeSafe, however, programmatic and methodologic limitations contributed to the inconclusive results. Further research into the hazards faced by residential construction workers is needed. Am. J. Ind. Med. 45:210-217, 2004. Copyright 2004 Wiley-Liss, Inc.

Identifying behaviour patterns of construction safety using system archetypes.

PubMed

Guo, Brian H W; Yiu, Tak Wing; González, Vicente A

2015-07-01

Construction safety management involves complex issues (e.g., different trades, multi-organizational project structure, constantly changing work environment, and transient workforce). Systems thinking is widely considered as an effective approach to understanding and managing the complexity. This paper aims to better understand dynamic complexity of construction safety management by exploring archetypes of construction safety. To achieve this, this paper adopted the ground theory method (GTM) and 22 interviews were conducted with participants in various positions (government safety inspector, client, health and safety manager, safety consultant, safety auditor, and safety researcher). Eight archetypes were emerged from the collected data: (1) safety regulations, (2) incentive programs, (3) procurement and safety, (4) safety management in small businesses (5) production and safety, (6) workers' conflicting goals, (7) blame on workers, and (8) reactive and proactive learning. These archetypes capture the interactions between a wide range of factors within various hierarchical levels and subsystems. As a free-standing tool, they advance the understanding of dynamic complexity of construction safety management and provide systemic insights into dealing with the complexity. They also can facilitate system dynamics modelling of construction safety process. Copyright © 2015 Elsevier Ltd. All rights reserved.

A risk-based, product-level approach for assuring aquatic environmental safety of cleaning products in the context of sustainability: The Environmental Safety Check (ESC) scheme of the A.I.S.E. Charter for Sustainable Cleaning.

PubMed

Pickup, John Alexander; Dewaele, Joost; Furmanski, Nicola L; Kowalczyk, Agnieszka; Luijkx, Gerard Ca; Mathieu, Sophie; Stelter, Norbert

2017-01-01

Cleaning products have long been a focus of efforts to improve sustainability and assure safety for the aquatic environment when disposed of after use. The latter is addressed at ingredient level through environmental risk assessment, including in formal frameworks such as REACH. Nevertheless, in the context of programs to improve overall sustainability, stakeholders demand both environmental safety assurance and progress at product level. Current product-level approaches for aquatic toxicity (e.g., USEtox™, Critical Dilution Volume) can be seen as predominantly hazard-based. The more logical approach would be risk-based, because ecotoxicity is generally threshold-dependent and hazard-based assessment produces conflicts with risk-based learnings. The development of a risk-based approach to assess formulated products is described: the International Association for Soaps, Detergents and Maintenance Products (A.I.S.E.) Charter Environmental Safety Check (ESC), which is consistent with the scientific principles underlying REACH. This is implemented through a simple spreadsheet tool and internal database of ingredient parameters including predicted no-effect concentration (PNEC) and removal rate. A novel feature is applying market volume information for both product types and ingredients to permit a risk-based calculation. To pass the ESC check, the projected environmental safety ratio (PESR) for each ingredient as formulated and dosed (unless cleared by a published risk assessment or exempted as inherently low risk) must be less than 1. The advantages of a risk-based approach are discussed. The strengths and limitations of various possible approaches to standard-setting, product-ranking and driving continuous improvement in respect of potential ecotoxic impacts on the aquatic environment are considered. It is proposed that as ecotoxicity is generally accepted to be threshold-dependent, with no effect below the threshold, the most constructive approach to continuous improvement of sustainability with regard to ecotoxicity is to focus efforts on instances where the safety margins for ingredients as used in specific products are narrow. This necessitates a risk-based approach. Integr Environ Assess Manag 2017;13:127-138. © 2016 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals, Inc. on behalf of SETAC. © 2016 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals, Inc. on behalf of SETAC.

Perceived heat stress and health effects on construction workers.

PubMed

Dutta, Priya; Rajiva, Ajit; Andhare, Dileep; Azhar, Gulrez Shah; Tiwari, Abhiyant; Sheffield, Perry

2015-01-01

Increasing heat waves-particularly in urban areas where construction is most prevalent, highlight a need for heat exposure assessment of construction workers. This study aims to characterize the effects of heat on construction workers from a site in Gandhinagar. This study involved a mixed methods approach consisting of a cross sectional survey with anthropometric measurements (n = 219) and four focus groups with construction workers, as well as environmental measurements of heat stress exposure at a construction site. Survey data was collected in two seasons i.e., summer and winter months, and heat illness and symptoms were compared between the two time periods. Thematic coding of focus group data was used to identify vulnerability factors and coping mechanisms of the workers. Heat stress, recorded using a wet bulb globe temperature monitor, was compared to international safety standards. The survey findings suggest that heat-related symptoms increased in summer; 59% of all reports in summer were positive for symptoms (from Mild to Severe) as compared to 41% in winter. Focus groups revealed four dominant themes: (1) Non-occupational stressors compound work stressors; (2) workers were particularly attuned to the impact of heat on their health; (3) workers were aware of heat-related preventive measures; and (4) few resources were currently available to protect workers from heat stress. Working conditions often exceed international heat stress safety thresholds. Female workers and new employees might be at increased risk of illness or injury. This study suggests significant health impacts on construction workers from heat stress exposure in the workplace, showed that heat stress levels were higher than those prescribed by international standards and highlights the need for revision of work practices, increased protective measures, and possible development of indigenous work safety standards for heat exposure.

Perceived heat stress and health effects on construction workers

PubMed Central

Dutta, Priya; Rajiva, Ajit; Andhare, Dileep; Azhar, Gulrez Shah; Tiwari, Abhiyant; Sheffield, Perry

2015-01-01

Introduction: Increasing heat waves-particularly in urban areas where construction is most prevalent, highlight a need for heat exposure assessment of construction workers. This study aims to characterize the effects of heat on construction workers from a site in Gandhinagar. Materials and Methods: This study involved a mixed methods approach consisting of a cross sectional survey with anthropometric measurements (n = 219) and four focus groups with construction workers, as well as environmental measurements of heat stress exposure at a construction site. Survey data was collected in two seasons i.e., summer and winter months, and heat illness and symptoms were compared between the two time periods. Thematic coding of focus group data was used to identify vulnerability factors and coping mechanisms of the workers. Heat stress, recorded using a wet bulb globe temperature monitor, was compared to international safety standards. Results: The survey findings suggest that heat-related symptoms increased in summer; 59% of all reports in summer were positive for symptoms (from Mild to Severe) as compared to 41% in winter. Focus groups revealed four dominant themes: (1) Non-occupational stressors compound work stressors; (2) workers were particularly attuned to the impact of heat on their health; (3) workers were aware of heat-related preventive measures; and (4) few resources were currently available to protect workers from heat stress. Working conditions often exceed international heat stress safety thresholds. Female workers and new employees might be at increased risk of illness or injury. Conclusion: This study suggests significant health impacts on construction workers from heat stress exposure in the workplace, showed that heat stress levels were higher than those prescribed by international standards and highlights the need for revision of work practices, increased protective measures, and possible development of indigenous work safety standards for heat exposure. PMID:26957814

The Entanglements of Agrarian Ethics with Agrarian Risks and Leveraging Them in Agricultural Health Safety

PubMed Central

Bendixsen, C.G.

2017-01-01

Agriculture is the most dangerous occupation in the United States for both workers and bystanders. Family farms highlight an intersection of domesticity and labor. Agrarian ethics of animal husbandry, land stewardship, and kinship are often conflated and constructed to accommodate unpredictable risks (e.g., weather, financial markets). Here, the right or good agricultural practice is assessed in light of an acute event. Risks of illness and injury are often relegated to the realm of acute unpredictability and accepted as intrinsic to desirable ways of life. The following is a description of agrarian ethics and risks generated from personal experience and ethnographic inquiries in the Midwest, the Intermountain West, and Texas over the past 10 years. This paper assesses health and safety within agrarian ethics. These results and discussion lead us to an important conversation about how we can be more detailed in the use of terms like “cultural appropriateness.” It also raises the question as to what is really at stake in public health perspectives like those found in the socioecological and extended parallel process models when deployed in agricultural health and safety. PMID:27749196

Construction and curation of a large ecotoxicological dataset for the EcoTTC

EPA Science Inventory

The Ecological Threshold for Toxicological Concern, or ecoTTC, has been proposed as a natural next step to the well-known human safety TTC concept. The ecoTTC is particularly suited for use as an early screening tool in the risk assessment process, in situations where chemical h...

Relationships among Safety Climate, Safety Behavior, and Safety Outcomes for Ethnic Minority Construction Workers

PubMed Central

Lyu, Sainan; Chan, Albert P. C.; Wong, Francis K. W.

2018-01-01

In many countries, it is common practice to attract and employ ethnic minority (EM) or migrant workers in the construction industry. This primarily occurs in order to alleviate the labor shortage caused by an aging workforce with a lack of new entrants. Statistics show that EM construction workers are more likely to have occupational fatal and nonfatal injuries than their local counterparts; however, the mechanism underlying accidents and injuries in this vulnerable population has been rarely examined. This study aims to investigate relationships among safety climate, safety behavior, and safety outcomes for EM construction workers. To this end, a theoretical research model was developed based on a comprehensive review of the current literature. In total, 289 valid questionnaires were collected face-to-face from 223 Nepalese construction workers and 56 Pakistani construction workers working on 15 construction sites in Hong Kong. Structural equation modelling was employed to validate the constructs and test the hypothesized model. Results show that there were significant positive relationships between safety climate and safety behaviors, and significant negative relationships between safety behaviors and safety outcomes for EM construction workers. This research contributes to the literature regarding EM workers by providing empirical evidence of the mechanisms by which safety climate affects safety behaviors and outcomes. It also provides insights in order to help the key stakeholders formulate safety strategies for EM workers in many areas where numerous EM workers are employed, such as in the U.S., the UK, Australia, Singapore, Malaysia, and the Middle East. PMID:29522503

Influence of safety motivation and climate on safety behaviour and outcomes: evidence from the Saudi Arabian construction industry.

PubMed

Panuwatwanich, Kriengsak; Al-Haadir, Saeed; Stewart, Rodney A

2017-03-01

Over the last three decades, safety literature has focused on safety climate and its role in forecasting injuries and accidents. However, research findings regarding the relationships between safety climate and other key outcome constructs are somewhat inconsistent. Recent safety climate literature suggests that examining the role of safety motivation may help provide a better explanation of such relationships. The research presented in this article aimed to empirically analyse the relationships among safety motivation, safety climate, safety behaviour and safety outcomes within the context of the Saudi Arabian construction industry. A conceptual model was developed to examine the relationships among four main constructs: safety motivation, safety climate, safety behaviour and safety outcomes. Based on the survey data collected in Saudi Arabia from site engineers and project managers (n = 295), statistical analyses were carried out, including confirmatory and exploratory factor analysis, and structural equation modelling to assess the model and test the hypotheses. The main results indicated that safety motivation could positively influence safety behaviour through safety climate, which plays a mediating role for this mechanism. The results also confirmed that safety behaviour could predict safety outcomes within the context of the Saudi Arabian construction industry.

Understanding the relationship between safety investment and safety performance of construction projects through agent-based modeling.

PubMed

Lu, Miaojia; Cheung, Clara Man; Li, Heng; Hsu, Shu-Chien

2016-09-01

The construction industry in Hong Kong increased its safety investment by 300% in the past two decades; however, its accident rate has plateaued to around 50% for one decade. Against this backdrop, researchers have found inconclusive results on the causal relationship between safety investment and safety performance. Using agent-based modeling, this study takes an unconventional bottom-up approach to study safety performance on a construction site as an outcome of a complex system defined by interactions among a worksite, individual construction workers, and different safety investments. Instead of focusing on finding the absolute relationship between safety investment and safety performance, this study contributes to providing a practical framework to investigate how different safety investments interacting with different parameters such as human and environmental factors could affect safety performance. As a result, we could identify cost-effective safety investments under different construction scenarios for delivering optimal safety performance. Copyright © 2016 Elsevier Ltd. All rights reserved.

Deaths from trench cave-in in the construction industry.

PubMed

Suruda, A; Smith, G; Baker, S P

1988-07-01

At least 70 US construction workers die each year in trench cave-ins, and Occupational Safety and Health Administration (OSHA) standards for work in trenches have been criticized as hard to understand and inadequate. This study examined 306 fatal cases, obtained mainly from OSHA investigations, from 1974 to 1986. Most of the deaths occurred in shallow trenches while digging sewer lines, and were caused by failing to shore or brace the walls of the trench. The risk of cave-in death was higher in young workers and those in small firms; only 12% of the deaths were in unionized companies. OSHA issued citations in 94% of the cases, with fines ranging up to $58,400; the average fine was $1,991 per death. Death due to cave-in is a significant risk for construction workers, and can be prevented by proper protective measures.

46 CFR 91.60-5 - Cargo Ship Safety Construction Certificate.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Cargo Ship Safety Construction Certificate. 91.60-5..., 1974 § 91.60-5 Cargo Ship Safety Construction Certificate. (a) All vessels on an international voyage are required to have a Cargo Ship Safety Construction Certificate. This certificate shall be issued by...

46 CFR 91.60-5 - Cargo Ship Safety Construction Certificate.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 4 2011-10-01 2011-10-01 false Cargo Ship Safety Construction Certificate. 91.60-5..., 1974 § 91.60-5 Cargo Ship Safety Construction Certificate. (a) All vessels on an international voyage are required to have a Cargo Ship Safety Construction Certificate. This certificate shall be issued by...

46 CFR 189.60-5 - Cargo Ship Safety Construction Certificate.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Cargo Ship Safety Construction Certificate. 189.60-5..., 1974 § 189.60-5 Cargo Ship Safety Construction Certificate. (a) All vessels on an international voyage are required to have a Cargo Ship Safety Construction Certificate. This certificate shall be issued by...

46 CFR 91.60-5 - Cargo Ship Safety Construction Certificate.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 4 2013-10-01 2013-10-01 false Cargo Ship Safety Construction Certificate. 91.60-5..., 1974 § 91.60-5 Cargo Ship Safety Construction Certificate. (a) All vessels on an international voyage are required to have a Cargo Ship Safety Construction Certificate. This certificate shall be issued by...

46 CFR 91.60-5 - Cargo Ship Safety Construction Certificate.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false Cargo Ship Safety Construction Certificate. 91.60-5..., 1974 § 91.60-5 Cargo Ship Safety Construction Certificate. (a) All vessels on an international voyage are required to have a Cargo Ship Safety Construction Certificate. This certificate shall be issued by...

46 CFR 189.60-5 - Cargo Ship Safety Construction Certificate.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Cargo Ship Safety Construction Certificate. 189.60-5..., 1974 § 189.60-5 Cargo Ship Safety Construction Certificate. (a) All vessels on an international voyage are required to have a Cargo Ship Safety Construction Certificate. This certificate shall be issued by...

46 CFR 91.60-5 - Cargo Ship Safety Construction Certificate.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 4 2014-10-01 2014-10-01 false Cargo Ship Safety Construction Certificate. 91.60-5..., 1974 § 91.60-5 Cargo Ship Safety Construction Certificate. (a) All vessels on an international voyage are required to have a Cargo Ship Safety Construction Certificate. This certificate shall be issued by...

46 CFR 189.60-5 - Cargo Ship Safety Construction Certificate.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Cargo Ship Safety Construction Certificate. 189.60-5..., 1974 § 189.60-5 Cargo Ship Safety Construction Certificate. (a) All vessels on an international voyage are required to have a Cargo Ship Safety Construction Certificate. This certificate shall be issued by...

46 CFR 189.60-5 - Cargo Ship Safety Construction Certificate.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Cargo Ship Safety Construction Certificate. 189.60-5..., 1974 § 189.60-5 Cargo Ship Safety Construction Certificate. (a) All vessels on an international voyage are required to have a Cargo Ship Safety Construction Certificate. This certificate shall be issued by...

Assessment of accident severity in the construction industry using the Bayesian theorem.

PubMed

Alizadeh, Seyed Shamseddin; Mortazavi, Seyed Bagher; Mehdi Sepehri, Mohammad

2015-01-01

Construction is a major source of employment in many countries. In construction, workers perform a great diversity of activities, each one with a specific associated risk. The aim of this paper is to identify workers who are at risk of accidents with severe consequences and classify these workers to determine appropriate control measures. We defined 48 groups of workers and used the Bayesian theorem to estimate posterior probabilities about the severity of accidents at the level of individuals in construction sector. First, the posterior probabilities of injuries based on four variables were provided. Then the probabilities of injury for 48 groups of workers were determined. With regard to marginal frequency of injury, slight injury (0.856), fatal injury (0.086) and severe injury (0.058) had the highest probability of occurrence. It was observed that workers with <1 year's work experience (0.168) had the highest probability of injury occurrence. The first group of workers, who were extensively exposed to risk of severe and fatal accidents, involved workers ≥ 50 years old, married, with 1-5 years' work experience, who had no past accident experience. The findings provide a direction for more effective safety strategies and occupational accident prevention and emergency programmes.

Final Environmental Impact Statement. Mankato-North Mankato-Le Hillier Flood Control. Phase I (As Amended 18 January 1972). Final Supplement II-C.

DTIC Science & Technology

1983-11-01

I A 11 Cultural Resources I 11 Noise CC7A&I 1.. Water Resources T, B 12 Traffic Service and Safety _._ 12 Rail Operations and Service 1 13 Avall e.no...Recreation 114 Cultural Resources 15 Noise 15 Water Resources 15 Traffic Service and Safety 16 Rail Operations and Service 16 6.00 Public Involvement 17...renovate the trusses, the disturbance to rail service that would occur during construction, and the small potential cost saving compared to the risks

Safety in construction--a comprehensive description of the characteristics of high safety standards in construction work, from the combined perspective of supervisors and experienced workers.

PubMed

Törner, Marianne; Pousette, Anders

2009-01-01

The often applied engineering approach to safety management in the construction industry needs to be supplemented by organizational measures and measures based on how people conceive and react to their social environment. This requires in-depth knowledge of the broad preconditions for high safety standards in construction. The aim of the study was to comprehensively describe the preconditions and components of high safety standards in the construction industry from the perspective of both experienced construction workers and first-line managers. Five worker safety representatives and 19 first-line managers were interviewed, all strategically selected from within a large Swedish construction project. Phenomenographic methodology was used for data acquisition and analysis and to categorize the information. Nine informants verified the results. The study identified four main categories of work safety preconditions and components: (1) Project characteristics and nature of the work, which set the limits of safety management; (2) Organization and structures, with the subcategories planning, work roles, procedures, and resources; (3) Collective values, norms, and behaviors, with the subcategories climate and culture, and interaction and cooperation; and (4) Individual competence and attitudes, with the subcategories knowledge, ability and experience, and individual attitudes. The results comprehensively describe high safety standards in construction, incorporating organizational, group, individual, and technical aspects. High-quality interaction between different organizational functions and hierarchical levels stood out as important aspects of safety. The results are discussed in relation to previous research into safety and into the social-psychological preconditions for other desired outcomes in occupational settings. The results can guide construction companies in planning and executing construction projects to a high safety standard.

46 CFR 107.409 - Safety Construction Certificate.

Code of Federal Regulations, 2010 CFR

2010-10-01

...)(ii), Chapter I of the International Convention for Safety of Life at Sea, 1974. (c) A Safety... requirements in Regulation 12(a)(ii), the Coast Guard may— (1) Suspend an unexpired Safety Construction... 46 Shipping 4 2010-10-01 2010-10-01 false Safety Construction Certificate. 107.409 Section 107.409...

46 CFR 107.409 - Safety Construction Certificate.

Code of Federal Regulations, 2011 CFR

2011-10-01

...)(ii), Chapter I of the International Convention for Safety of Life at Sea, 1974. (c) A Safety... requirements in Regulation 12(a)(ii), the Coast Guard may— (1) Suspend an unexpired Safety Construction... 46 Shipping 4 2011-10-01 2011-10-01 false Safety Construction Certificate. 107.409 Section 107.409...

Prospective safety performance evaluation on construction sites.

PubMed

Wu, Xianguo; Liu, Qian; Zhang, Limao; Skibniewski, Miroslaw J; Wang, Yanhong

2015-05-01

This paper presents a systematic Structural Equation Modeling (SEM) based approach for Prospective Safety Performance Evaluation (PSPE) on construction sites, with causal relationships and interactions between enablers and the goals of PSPE taken into account. According to a sample of 450 valid questionnaire surveys from 30 Chinese construction enterprises, a SEM model with 26 items included for PSPE in the context of Chinese construction industry is established and then verified through the goodness-of-fit test. Three typical types of construction enterprises, namely the state-owned enterprise, private enterprise and Sino-foreign joint venture, are selected as samples to measure the level of safety performance given the enterprise scale, ownership and business strategy are different. Results provide a full understanding of safety performance practice in the construction industry, and indicate that the level of overall safety performance situation on working sites is rated at least a level of III (Fair) or above. This phenomenon can be explained that the construction industry has gradually matured with the norms, and construction enterprises should improve the level of safety performance as not to be eliminated from the government-led construction industry. The differences existing in the safety performance practice regarding different construction enterprise categories are compared and analyzed according to evaluation results. This research provides insights into cause-effect relationships among safety performance factors and goals, which, in turn, can facilitate the improvement of high safety performance in the construction industry. Copyright © 2015 Elsevier Ltd. All rights reserved.

Vulnerability Analysis and Evaluation of Urban Road System in Tianjin

NASA Astrophysics Data System (ADS)

Liu, Y. Q.; Wu, X.

In recent years, with the development of economy, the road construction of our country has entered into a period of rapid growth. The road transportation network has been expanding and the risk of disasters is increasing. In this paper we study the vulnerability of urban road system in Tianjin. After analyzed many risk factors of the urban road system security, including road construction, road traffic and the natural environment, we proposed an evaluation index of vulnerability of urban road system and established the corresponding evaluation index system. Based on the results of analysis and comprehensive evaluation, appropriate improvement measures and suggestions which may reduce the vulnerability of the road system and improve the safety and reliability of the road system are proposed.

The Impact of Transformational Leadership on Safety Climate and Individual Safety Behavior on Construction Sites.

PubMed

Shen, Yuzhong; Ju, Chuanjing; Koh, Tas Yong; Rowlinson, Steve; Bridge, Adrian J

2017-01-05

Unsafe acts contribute dominantly to construction accidents, and increasing safety behavior is essential to reduce accidents. Previous research conceptualized safety behavior as an interaction between proximal individual differences (safety knowledge and safety motivation) and distal contextual factors (leadership and safety climate). However, relatively little empirical research has examined this conceptualization in the construction sector. Given the cultural background of the sample, this study makes a slight modification to the conceptualization and views transformational leadership as an antecedent of safety climate. Accordingly, this study establishes a multiple mediator model showing the mechanisms through which transformational leadership translates into safety behavior. The multiple mediator model is estimated by the structural equation modeling (SEM) technique, using individual questionnaire responses from a random sample of construction personnel based in Hong Kong. As hypothesized, transformational leadership has a significant impact on safety climate which is mediated by safety-specific leader-member exchange (LMX), and safety climate in turn impacts safety behavior through safety knowledge. The results suggest that future safety climate interventions should be more effective if supervisors exhibit transformational leadership, encourage construction personnel to voice safety concerns without fear of retaliation, and repeatedly remind them about safety on the job.

The Impact of Transformational Leadership on Safety Climate and Individual Safety Behavior on Construction Sites

PubMed Central

Shen, Yuzhong; Ju, Chuanjing; Koh, Tas Yong; Rowlinson, Steve; Bridge, Adrian J.

2017-01-01

Unsafe acts contribute dominantly to construction accidents, and increasing safety behavior is essential to reduce accidents. Previous research conceptualized safety behavior as an interaction between proximal individual differences (safety knowledge and safety motivation) and distal contextual factors (leadership and safety climate). However, relatively little empirical research has examined this conceptualization in the construction sector. Given the cultural background of the sample, this study makes a slight modification to the conceptualization and views transformational leadership as an antecedent of safety climate. Accordingly, this study establishes a multiple mediator model showing the mechanisms through which transformational leadership translates into safety behavior. The multiple mediator model is estimated by the structural equation modeling (SEM) technique, using individual questionnaire responses from a random sample of construction personnel based in Hong Kong. As hypothesized, transformational leadership has a significant impact on safety climate which is mediated by safety-specific leader–member exchange (LMX), and safety climate in turn impacts safety behavior through safety knowledge. The results suggest that future safety climate interventions should be more effective if supervisors exhibit transformational leadership, encourage construction personnel to voice safety concerns without fear of retaliation, and repeatedly remind them about safety on the job. PMID:28067775

Methods and strategies for future reactor safety goals

NASA Astrophysics Data System (ADS)

Arndt, Steven Andrew

There have been significant discussions over the past few years by the United States Nuclear Regulatory Commission (NRC), the Advisory Committee on Reactor Safeguards (ACRS), and others as to the adequacy of the NRC safety goals for use with the next generation of nuclear power reactors to be built in the United States. The NRC, in its safety goals policy statement, has provided general qualitative safety goals and basic quantitative health objectives (QHOs) for nuclear reactors in the United States. Risk metrics such as core damage frequency (CDF) and large early release frequency (LERF) have been used as surrogates for the QHOs. In its review of the new plant licensing policy the ACRS has looked at the safety goals, as has the NRC. A number of issues have been raised including what the Commission had in mind when it drafted the safety goals and QHOs, how risk from multiple reactors at a site should be combined for evaluation, how the combination of a new and old reactor at the same site should be evaluated, what the criteria for evaluating new reactors should be, and whether new reactors should be required to be safer than current generation reactors. As part of the development and application of the NRC safety goal policy statement the Commissioners laid out the expectations for the safety of a nuclear power plant but did not address the risk associated with current multi-unit sites, potential modular reactor sites, and hybrid sites that could contain current generation reactors, new passive reactors, and/or modular reactors. The NRC safety goals and the QHOs refer to a "nuclear power plant," but do not discuss whether a "plant" refers to only a single unit or all of the units on a site. There has been much discussion on this issue recently due to the development of modular reactors. Additionally, the risk of multiple reactor accidents on the same site has been largely ignored in the probabilistic risk assessments (PRAs) done to date, and in most risk-informed analyses and discussions. This dissertation examines potential approaches to updating the safety goals that include the establishment of new quantitative safety goal associated with the comparative risk of generating electricity by viable competing technologies and modifications of the goals to account for multi-plant reactor sites, and issues associated with the use of safety goals in both initial licensing and operational decision making. This research develops a new quantitative health objective that uses a comparable benefit risk metric based on the life-cycle risk of the construction, operation and decommissioning of a comparable non-nuclear electric generation facility, as well as the risks associated with mining and transportation. This dissertation also evaluates the effects of using various methods for aggregating site risk as a safety metric, as opposed to using single plant safety goals. Additionally, a number of important assumptions inherent in the current safety goals, including the effect of other potential negative societal effects such as the generation of greenhouse gases (e.g., carbon dioxide) have on the risk of electric power production and their effects on the setting of safety goals, is explored. Finally, the role risk perception should play in establishing safety goals has been explored. To complete this evaluation, a new method to analytically compare alternative technologies of generating electricity was developed, including development of a new way to evaluate risk perception, and a new method was developed for evaluating the risk at multiple units on a single site. To test these modifications to the safety goals a number of possible reactor designs and configurations were evaluated using these new proposed safety goals to determine the goals' usefulness and utility. The results of the analysis showed that the modifications provide measures that more closely evaluate the potential risk to the public from the operation of nuclear power plants than the current safety goals, while still providing a straight-forward process for assessment of reactor design and operation.

Correlation between safety climate and contractor safety assessment programs in construction

PubMed Central

Sparer, EH1; Murphy, LA; Taylor, KM; Dennerlein, Jt

2015-01-01

Background Contractor safety assessment programs (CSAPs) measure safety performance by integrating multiple data sources together; however, the relationship between these measures of safety performance and safety climate within the construction industry is unknown. Methods 401 construction workers employed by 68 companies on 26 sites and 11 safety managers employed by 11 companies completed brief surveys containing a nine-item safety climate scale developed for the construction industry. CSAP scores from ConstructSecure, Inc., an online CSAP database, classified these 68 companies as high or low scorers, with the median score of the sample population as the threshold. Spearman rank correlations evaluated the association between the CSAP score and the safety climate score at the individual level, as well as with various grouping methodologies. In addition, Spearman correlations evaluated the comparison between manager-assessed safety climate and worker-assessed safety climate. Results There were no statistically significant differences between safety climate scores reported by workers in the high and low CSAP groups. There were, at best, weak correlations between workers’ safety climate scores and the company CSAP scores, with marginal statistical significance with two groupings of the data. There were also no significant differences between the manager-assessed safety climate and the worker-assessed safety climate scores. Conclusions A CSAP safety performance score does not appear to capture safety climate, as measured in this study. The nature of safety climate in construction is complex, which may be reflective of the challenges in measuring safety climate within this industry. PMID:24038403

Safer Liquid Natural Gas

NASA Technical Reports Server (NTRS)

1976-01-01

After the disaster of Staten Island in 1973 where 40 people were killed repairing a liquid natural gas storage tank, the New York Fire Commissioner requested NASA's help in drawing up a comprehensive plan to cover the design, construction, and operation of liquid natural gas facilities. Two programs are underway. The first transfers comprehensive risk management techniques and procedures which take the form of an instruction document that includes determining liquid-gas risks through engineering analysis and tests, controlling these risks by setting up redundant fail safe techniques, and establishing criteria calling for decisions that eliminate or accept certain risks. The second program prepares a liquid gas safety manual (the first of its kind).

Design of an automated cart and mount for a hyperspectral imaging system to be used in produce fields

USDA-ARS?s Scientific Manuscript database

The goal of this project was to construct a cart and a mounting system that would allow a hyperspectral laser-induced fluorescence imaging system (HLIFIS) to be used to detect fecal material in produce fields. Fecal contaminated produce is a recognized food safety risk. Previous research demonstrate...

78 FR 75379 - Entergy Operations, Inc.; Combined License Application for Grand Gulf Unit 3; Exemption From the...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-11

... accidents are increased. Therefore, there is no undue risk to public health and safety. Plant construction... at this time. Based on the nature of the requested exemption as described above, no new accident... a license decision is made, the probability of postulated accidents is not increased. Additionally...

Towards a Competency-based Vision for Construction Safety Education

NASA Astrophysics Data System (ADS)

Pedro, Akeem; Hai Chien, Pham; Park, Chan Sik

2018-04-01

Accidents still prevail in the construction industry, resulting in injuries and fatalities all over the world. Educational programs in construction should deliver safety knowledge and skills to students who will become responsible for ensuring safe construction work environments in the future. However, there is a gap between the competencies current pedagogical approaches target, and those required for safety in practice. This study contributes to addressing this issue in three steps. Firstly, a vision for competency-based construction safety education is conceived. Building upon this, a research scheme to achieve the vision is developed, and the first step of the scheme is initiated in this study. The critical competencies required for safety education are investigated through analyses of literature, and confirmed through surveys with construction and safety management professionals. Results from the study would be useful in establishing and orienting education programs towards current industry safety needs and requirements

Factors Influencing Implementation of OHSAS 18001 in Indian Construction Organizations: Interpretive Structural Modeling Approach

PubMed Central

Rajaprasad, Sunku Venkata Siva; Chalapathi, Pasupulati Venkata

2015-01-01

Background Construction activity has made considerable breakthroughs in the past two decades on the back of increases in development activities, government policies, and public demand. At the same time, occupational health and safety issues have become a major concern to construction organizations. The unsatisfactory safety performance of the construction industry has always been highlighted since the safety management system is neglected area and not implemented systematically in Indian construction organizations. Due to a lack of enforcement of the applicable legislation, most of the construction organizations are forced to opt for the implementation of Occupational Health Safety Assessment Series (OHSAS) 18001 to improve safety performance. Methods In order to better understand factors influencing the implementation of OHSAS 18001, an interpretive structural modeling approach has been applied and the factors have been classified using matrice d'impacts croises-multiplication appliqué a un classement (MICMAC) analysis. The study proposes the underlying theoretical framework to identify factors and to help management of Indian construction organizations to understand the interaction among factors influencing in implementation of OHSAS 18001. Results Safety culture, continual improvement, morale of employees, and safety training have been identified as dependent variables. Safety performance, sustainable construction, and conducive working environment have been identified as linkage variables. Management commitment and safety policy have been identified as the driver variables. Conclusion Management commitment has the maximum driving power and the most influential factor is safety policy, which states clearly the commitment of top management towards occupational safety and health. PMID:26929828

Culture related to road traffic safety: a comparison of eight countries using two conceptualizations of culture.

PubMed

Nordfjærn, Trond; Şimşekoğlu, Özlem; Rundmo, Torbjorn

2014-01-01

The majority of previous cross-country studies of human factors relevant to traffic safety have not operationalized and measured culture. Also studies in this vein have mostly been carried out in Europe and the United States. The aim of the study was to examine country cluster differences, based on the Culture's Consequences framework, in road traffic risk perception, attitudes towards traffic safety and driver behaviour in samples from Norway, Russia, India, Ghana, Tanzania, Uganda, Turkey and Iran. An additional aim was to examine cluster differences in road traffic culture as symbol use and to investigate whether this theoretical cultural framework predicts risk perception, attitudes towards traffic safety and driver behaviour in the country clusters. The sample consisted of a total of 2418 individuals who were obtained by convenience sampling in the different countries. The countries segmented into four Culture's Consequences clusters; Norway, Russia and India, Sub-Saharan Africa, and Near East countries. The findings showed that Norwegians reported overall safer attitudes towards traffic safety and driver behaviour than the remaining country clusters. Individuals in Africa reported the highest risk perception. The countries also differed substantially in road traffic culture as symbol use. Contrary to established cultural theory, prediction models revealed that cultural factors were stronger predictors of driver behaviour than of risk perception. Also, the social cognitive risk constructs (i.e. risk perception and attitudes) solely explained variance in driver behaviour in the Norwegian and Russia/India clusters. Previous empirical efforts, which aimed to demonstrate that culture is important for the risk perception criterion, may have focused on a criterion variable that is not strongly related to driver behaviour. Furthermore, countermeasures aimed to influence social cognition may have stronger applicability in countries with a more individualistic western cultural orientation. Copyright © 2013 Elsevier Ltd. All rights reserved.

Applying Sensor-Based Technology to Improve Construction Safety Management.

PubMed

Zhang, Mingyuan; Cao, Tianzhuo; Zhao, Xuefeng

2017-08-11

Construction sites are dynamic and complicated systems. The movement and interaction of people, goods and energy make construction safety management extremely difficult. Due to the ever-increasing amount of information, traditional construction safety management has operated under difficult circumstances. As an effective way to collect, identify and process information, sensor-based technology is deemed to provide new generation of methods for advancing construction safety management. It makes the real-time construction safety management with high efficiency and accuracy a reality and provides a solid foundation for facilitating its modernization, and informatization. Nowadays, various sensor-based technologies have been adopted for construction safety management, including locating sensor-based technology, vision-based sensing and wireless sensor networks. This paper provides a systematic and comprehensive review of previous studies in this field to acknowledge useful findings, identify the research gaps and point out future research directions.

Applying Sensor-Based Technology to Improve Construction Safety Management

PubMed Central

Zhang, Mingyuan; Cao, Tianzhuo; Zhao, Xuefeng

2017-01-01

Construction sites are dynamic and complicated systems. The movement and interaction of people, goods and energy make construction safety management extremely difficult. Due to the ever-increasing amount of information, traditional construction safety management has operated under difficult circumstances. As an effective way to collect, identify and process information, sensor-based technology is deemed to provide new generation of methods for advancing construction safety management. It makes the real-time construction safety management with high efficiency and accuracy a reality and provides a solid foundation for facilitating its modernization, and informatization. Nowadays, various sensor-based technologies have been adopted for construction safety management, including locating sensor-based technology, vision-based sensing and wireless sensor networks. This paper provides a systematic and comprehensive review of previous studies in this field to acknowledge useful findings, identify the research gaps and point out future research directions. PMID:28800061

Correlation between safety climate and contractor safety assessment programs in construction.

PubMed

Sparer, Emily H; Murphy, Lauren A; Taylor, Kathryn M; Dennerlein, Jack T

2013-12-01

Contractor safety assessment programs (CSAPs) measure safety performance by integrating multiple data sources together; however, the relationship between these measures of safety performance and safety climate within the construction industry is unknown. Four hundred and one construction workers employed by 68 companies on 26 sites and 11 safety managers employed by 11 companies completed brief surveys containing a nine-item safety climate scale developed for the construction industry. CSAP scores from ConstructSecure, Inc., an online CSAP database, classified these 68 companies as high or low scorers, with the median score of the sample population as the threshold. Spearman rank correlations evaluated the association between the CSAP score and the safety climate score at the individual level, as well as with various grouping methodologies. In addition, Spearman correlations evaluated the comparison between manager-assessed safety climate and worker-assessed safety climate. There were no statistically significant differences between safety climate scores reported by workers in the high and low CSAP groups. There were, at best, weak correlations between workers' safety climate scores and the company CSAP scores, with marginal statistical significance with two groupings of the data. There were also no significant differences between the manager-assessed safety climate and the worker-assessed safety climate scores. A CSAP safety performance score does not appear to capture safety climate, as measured in this study. The nature of safety climate in construction is complex, which may be reflective of the challenges in measuring safety climate within this industry. Am. J. Ind. Med. 56:1463-1472, 2013. © 2013 Wiley Periodicals, Inc. © 2013 Wiley Periodicals, Inc.

DOE Office of Scientific and Technical Information (OSTI.GOV)

MATALUCCI,RUDOLPH V.; O'CONNOR,SHARON

The mission of the Architectural Surety{trademark} program at Sandia National Laboratories is to assure the performance of buildings, facilities, and other infrastructure systems under normal, abnormal, and malevolent threat conditions. Through educational outreach efforts in the classroom, at conferences, and presentations such as this one, public and professional awareness of the need to defuse and mitigate such threats is increased. Buildings, airports, utilities, and other kinds of infrastructure deteriorate over time, as evidenced most dramatically by the crumbling cities and aging buildings, bridges, and other facility systems. Natural disasters such as tornadoes, earthquakes, hurricanes, and flooding also stress the materialsmore » and structural elements of the built environment. In addition, criminals, vandals, and terrorists attack federal buildings, dams, bridges, tunnels, and other public and private facilities. Engineers and architects are beginning to systematically consider these threats during the design, construction, and retrofit phases of buildings and infrastructures and are recommending advanced research in new materials and techniques. Existing building codes and standards do not adequately address nor protect the infrastructure or the public from many of these emerging threats. The activities in Sandia National Laboratories' Architectural Surety{trademark} efforts take a risk management approach to enhancing the safety, security, and reliability of the constructed environment. The technologies and techniques developed during Sandia's 50 years as the nation's lead laboratory for nuclear weapons surety are now being applied to assessing and reducing the vulnerability of dams, to enhancing the safety and security of staff in foreign embassies, and assuring the reliability of other federal facilities. High consequence surety engineering and design brings together technological advancements, new material requirements, systems integration, and risk management to improve the safety, security, and reliability of the as-built environment. The thrust of this paper is the role that new materials can play in protecting the infrastructure. Retrofits of existing buildings, innovative approaches to the design and construction of new facilities, and the mitigation of consequences in the event of an unpreventable disaster are some of the areas that new construction materials can benefit the Architectural Surety{trademark} of the constructed environment.« less

Selecting Strategies to Reduce High-Risk Unsafe Work Behaviors Using the Safety Behavior Sampling Technique and Bayesian Network Analysis.

PubMed

Ghasemi, Fakhradin; Kalatpour, Omid; Moghimbeigi, Abbas; Mohammadfam, Iraj

2017-03-04

High-risk unsafe behaviors (HRUBs) have been known as the main cause of occupational accidents. Considering the financial and societal costs of accidents and the limitations of available resources, there is an urgent need for managing unsafe behaviors at workplaces. The aim of the present study was to find strategies for decreasing the rate of HRUBs using an integrated approach of safety behavior sampling technique and Bayesian networks analysis. A cross-sectional study. The Bayesian network was constructed using a focus group approach. The required data was collected using the safety behavior sampling, and the parameters of the network were estimated using Expectation-Maximization algorithm. Using sensitivity analysis and belief updating, it was determined that which factors had the highest influences on unsafe behavior. Based on BN analyses, safety training was the most important factor influencing employees' behavior at the workplace. High quality safety training courses can reduce the rate of HRUBs about 10%. Moreover, the rate of HRUBs increased by decreasing the age of employees. The rate of HRUBs was higher in the afternoon and last days of a week. Among the investigated variables, training was the most important factor affecting safety behavior of employees. By holding high quality safety training courses, companies would be able to reduce the rate of HRUBs significantly.

The Impact of Heat Waves on Occurrence and Severity of Construction Accidents.

PubMed

Rameezdeen, Rameez; Elmualim, Abbas

2017-01-11

The impact of heat stress on human health has been extensively studied. Similarly, researchers have investigated the impact of heat stress on workers' health and safety. However, very little work has been done on the impact of heat stress on occupational accidents and their severity, particularly in South Australian construction. Construction workers are at high risk of injury due to heat stress as they often work outdoors, undertake hard manual work, and are often project based and sub-contracted. Little is known on how heat waves could impact on construction accidents and their severity. In order to provide more evidence for the currently limited number of empirical investigations on the impact of heat stress on accidents, this study analysed 29,438 compensation claims reported during 2002-2013 within the construction industry of South Australia. Claims reported during 29 heat waves in Adelaide were compared with control periods to elicit differences in the number of accidents reported and their severity. The results revealed that worker characteristics, type of work, work environment, and agency of accident mainly govern the severity. It is recommended that the implementation of adequate preventative measures in small-sized companies and civil engineering sites, targeting mainly old age workers could be a priority for Work, Health and Safety (WHS) policies.

The Impact of Heat Waves on Occurrence and Severity of Construction Accidents

PubMed Central

Rameezdeen, Rameez; Elmualim, Abbas

2017-01-01

The impact of heat stress on human health has been extensively studied. Similarly, researchers have investigated the impact of heat stress on workers’ health and safety. However, very little work has been done on the impact of heat stress on occupational accidents and their severity, particularly in South Australian construction. Construction workers are at high risk of injury due to heat stress as they often work outdoors, undertake hard manual work, and are often project based and sub-contracted. Little is known on how heat waves could impact on construction accidents and their severity. In order to provide more evidence for the currently limited number of empirical investigations on the impact of heat stress on accidents, this study analysed 29,438 compensation claims reported during 2002–2013 within the construction industry of South Australia. Claims reported during 29 heat waves in Adelaide were compared with control periods to elicit differences in the number of accidents reported and their severity. The results revealed that worker characteristics, type of work, work environment, and agency of accident mainly govern the severity. It is recommended that the implementation of adequate preventative measures in small-sized companies and civil engineering sites, targeting mainly old age workers could be a priority for Work, Health and Safety (WHS) policies. PMID:28085067

Modeling the factors affecting unsafe behavior in the construction industry from safety supervisors' perspective.

PubMed

Khosravi, Yahya; Asilian-Mahabadi, Hassan; Hajizadeh, Ebrahim; Hassanzadeh-Rangi, Narmin; Bastani, Hamid; Khavanin, Ali; Mortazavi, Seyed Bagher

2014-01-01

There can be little doubt that the construction is the most hazardous industry in the worldwide. This study was designed to modeling the factors affecting unsafe behavior from the perspective of safety supervisors. The qualitative research was conducted to extract a conceptual model. A structural model was then developed based on a questionnaire survey (n=266) by two stage Structural Equation Model (SEM) approach. An excellent confirmed 12-factors structure explained about 62% of variances unsafe behavior in the construction industry. A good fit structural model indicated that safety climate factors were positively correlated with safety individual factors (P<0.001) and workplace safety condition (P<0.001). The workplace safety condition was found to play a strong mediating role in linking the safety climate and construction workers' engagement in safe or unsafe behavior. In order to improve construction safety performance, more focus on the workplace condition is required.

HIV Prevention in Gay Family and House Networks: Fostering Self-Determination and Sexual Safety.

PubMed

Levitt, Heidi M; Horne, Sharon G; Freeman-Coppadge, Darren; Roberts, Tangela

2017-10-01

Many gay, bisexual, and transgender (GBT) people of color (POC) join house and/or constructed family communities, which serve as support networks composed mostly of other non-biologically related GBT/POC. These networks can decrease or increase the risk of exposure to HIV via multiple mechanisms (e.g., providing informal sexual safety education versus stigmatizing family members with HIV, encouraging sexual safety practices versus unsafe escorting, teaching self-care versus substance use) but act to support family members in the face of social and economic hardship. Researchers interviewed ten members of these social networks in the Boston metro area of the US and produced a saturated grounded theory analysis to explore the role of gay family/house networks in HIV risk management. While network members utilized HIV prevention resources, interviewees described how their efficacy was related to the intentions of leadership and strength of kinship boundaries within their community, economic opportunities, and communication skills. Clinical and research implications are discussed.

A Big-Data-based platform of workers' behavior: Observations from the field.

PubMed

Guo, S Y; Ding, L Y; Luo, H B; Jiang, X Y

2016-08-01

Behavior-Based Safety (BBS) has been used in construction to observe, analyze and modify workers' behavior. However, studies have identified that BBS has several limitations, which have hindered its effective implementation. To mitigate the negative impact of BBS, this paper uses a case study approach to develop a Big-Data-based platform to classify, collect and store data about workers' unsafe behavior that is derived from a metro construction project. In developing the platform, three processes were undertaken: (1) a behavioral risk knowledge base was established; (2) images reflecting workers' unsafe behavior were collected from intelligent video surveillance and mobile application; and (3) images with semantic information were stored via a Hadoop Distributed File System (HDFS). The platform was implemented during the construction of the metro-system and it is demonstrated that it can effectively analyze semantic information contained in images, automatically extract workers' unsafe behavior and quickly retrieve on HDFS as well. The research presented in this paper can enable construction organizations with the ability to visualize unsafe acts in real-time and further identify patterns of behavior that can jeopardize safety outcomes. Copyright © 2015 Elsevier Ltd. All rights reserved.

Individual safety performance in the construction industry: development and validation of two short scales.

PubMed

DeArmond, Sarah; Smith, April E; Wilson, Christina L; Chen, Peter Y; Cigularov, Konstantin P

2011-05-01

In the current research a short measure of safety performance is developed for use in the construction industry and the relationships between different components of safety performance and safety outcomes (e.g., occupational injuries and work-related pain) are explored within the construction context. This research consists of two field studies. In the first, comprehensive measures of safety compliance and safety participation were shortened and modified to be appropriate for use in construction. Evidence of reliability and validity is provided. Both safety compliance and safety participation were negatively related to occupational injuries, yet these two correlations were not statistically different. In the second study, we investigated the relationships between these two components of safety performance and work-related pain frequency, in addition to replicating Study 1. Safety compliance had a stronger negative relationship with pain than safety participation. Implications for research are discussed. Copyright © 2010 Elsevier Ltd. All rights reserved.

Is there agreement between worker self and supervisor assessment of worker safety performance? An examination in the construction industry.

PubMed

Xia, Nini; Griffin, Mark A; Wang, Xueqing; Liu, Xing; Wang, Dan

2018-06-01

Individual safety performance (behavior) critically influences safety outcomes in high-risk workplaces. Compared to the study of generic work performance on different measurements, few studies have investigated different measurements of safety performance, typically relying on employees' self-reflection of their safety behavior. This research aims to address this limitation by including worker self-reflection and other (i.e., supervisor) assessment of two worker safety performance dimensions, safety compliance and safety participation. A sample of 105 workers and 17 supervisors in 17 groups in the Chinese construction industry participated in this study. Comparisons were made between worker compliance and participation in each measurement, and between workers' and supervisors' assessment of workers' compliance and participation. Multilevel modeling was adopted to test the moderating effects on the worker self-reflection and supervisor-assessment relationship by group safety climate and the work experience of supervisors. Higher levels of safety compliance than participation were found for self-reflection and supervisor assessment. The discrepancy between the two measurements in each safety performance dimension was significant. The work experience of supervisors attenuated the discrepancy between self- and supervisor-assessment of compliance. Contrary to our expectations, the moderating effect of group safety climate was not supported. The discrepancy between worker self- and supervisor-assessment of worker safety performance, thus, suggests the importance of including alternative measurements of safety performance in addition to self-reflection. Lower levels of participation behavior in both raters suggest more research on the motivators of participatory behavior. Practical applications The discrepancy between different raters can lead to negative reactions of ratees, suggesting that managers should be aware of that difference. Assigning experienced supervisors as raters can be effective at mitigating interrater discrepancy and conflicts in the assessment of compliance behavior. Copyright © 2018 National Safety Council and Elsevier Ltd. All rights reserved.

The Attitude of Construction Workers toward the Implementation of Occupational Health and Safety (OHS)

NASA Astrophysics Data System (ADS)

Widaningsih, L.; Susanti, I.; Chandra, T.

2018-02-01

Construction industry refers to one of the industries dealing with high accident rate. Besides its outdoor workplace involving many workers who usually work manually, the workers’ work culture and less awareness of occupational health and safety (OHS) are attributed to the high accident rate. This study explores some construction workers who are involved in some construction projects in big cities such as Bandung and Jakarta. The questionnaire-given to the construction workers focusing on stone construction, wood construction, and finishing session-reveals that the construction workers knowledge and understanding of nine Occupational Health and Safety (OHS) aspects reach above 50%. However, does not appear to reflect their knowledge and understanding of Occupational Health and Safety (OHS). The results of Focus Group Discussion (FGD) and an in-depth interview show that the fallacious implementation of Occupational Health and Safety (OHS) is attributed to their traditional “work culture”.

Why do workers behave unsafely at work? Determinants of safe work practices in industrial workers.

PubMed

Garcia, A M; Boix, P; Canosa, C

2004-03-01

To explore the relation between safety climate (workers' perceptions regarding management's attitudes towards occupational safety and health) and workers' behaviour at work. Cross sectional survey of workers at the pottery industry in Castellon, Spain. Sampling was stratified by plant size and workers' gender, according to data on the working population at this setting. A total of 734 production workers were interviewed. Information was collected on safety climate and workers' behaviour towards occupational risks with a specific questionnaire. A safety climate index (SCI, scale 0-100) was constructed adding scores for each item measuring safety climate in the questionnaire. Workers' unsafe behaviour was analysed for the different safety climate index levels. Mean score for SCI was 71.90 (SD 19.19). There were no differences in SCI scores according to age, gender, education, children at charge, seniority at work, or type of employment. Small workplaces (<50 workers) showed significantly worse SCI (mean 67.23, SD 19.73) than the largest factories (>200 workers). Lower levels of SCI (SCI <50) were related to workers' unsafe behaviours (full/high accord with the statement "I excessively expose myself to hazards in my work", adjusted odds ratio ORa 2.79, 95% CI 1.60 to 4.88), and to lack of compliance with safety rules (ORa 12.83, 95% CI 5.92 to 27.80). Safety climate measures workers' perception of organisational factors related to occupational health and safety (for example, management commitment to risk prevention or priorities of safety versus production). In this study these factors are strongly associated with workers' attitudes towards safety at work. Longitudinal studies can further clarify the relation between safety climate and workers' behaviour regarding occupational safety and health.

Construction managers' perceptions of construction safety practices in small and large firms: a qualitative investigation.

PubMed

Gillen, Marion; Kools, Susan; McCall, Cade; Sum, Juliann; Moulden, Kelli

2004-01-01

Despite the institution of explicit safety practices in construction, there continue to be exceedingly high rates of morbidity and mortality from work-related injury. This study's purpose was to identify, compare and contrast views of construction managers from large and small firms regarding construction safety practices. A complementary analysis was conducted with construction workers. A semi-structured interview guide was used to elicit information from construction managers (n = 22) in a series of focus groups. Questions were designed to obtain information on direct safety practices and indirect practices such as communication style, attitude, expectations, and unspoken messages. Data were analyzed using thematic content analysis. Managers identified a broad commitment to safety, worker training, a changing workplace culture, and uniform enforcement as key constructs in maintaining safe worksites. Findings indicate that successful managers need to be involved, principled, flexible, and innovative. Best practices, as well as unsuccessful injury prevention programs, were discussed in detail. Obstacles to consistent safety practice include poor training, production schedules and financial constraints. Construction managers play a pivotal role in the definition and implementation of safety practices in the workplace. In order to succeed in this role, they require a wide variety of management skills, upper management support, and tools that will help them instill and maintain a positive safety culture. Developing and expanding management skills of construction managers may assist them in dealing with the complexity of the construction work environment, as well as providing them with the tools necessary to decrease work-related injuries.

Study on the Quality Management of Building Electricity Engineering Construction in the Whole Process

NASA Astrophysics Data System (ADS)

Qin, Minwu

2018-05-01

With the progress of science and technology, people use more and more types of electrical equipment and the functions are more and more complicated, which put forward higher requirements on the construction quality of electrical construction. If you ignore some of the necessary quality requirements and violate the specification of operation in the process of building electrical construction, that will bring great security risks and resulting in huge economic losses, even endanger personal safety. Manage and control construction quality of building electrical construction must be carried out throughout the whole process of construction. According to the construction characteristics of building electrical construction, this article analyze the construction details that are easy to be ignored but very important in the construction, based on management theory and put forward the methods of quality management in the whole process of building electrical construction. This template explains and demonstrates how to prepare your camera-ready paper for Trans Tech Publications. The best is to read these instructions and follow the outline of this text.

Protocol for a mixed-methods study on leader-based interventions in construction contractors' safety commitments.

PubMed

Pedersen, Betina Holbaek; Dyreborg, Johnny; Kines, Pete; Mikkelsen, Kim Lyngby; Hannerz, Harald; Andersen, Dorte Raaby; Spangenberg, Søren

2010-06-01

Owing to high injury rates, safety interventions are needed in the construction industry. Evidence-based interventions tailored to this industry are, however, scarce. Leader-based safety interventions have proven more effective than worker-based interventions in other industries. To test a leader-based safety intervention for construction sites. The intervention consists of encouraging safety coordinators to provide feedback on work safety to the client and line management. The intention is to increase communication and interactions regarding safety within the line management and between the client and the senior management. It is hypothesised that this, in turn, will lead to increased communication and interaction about safety between management and coworkers as well as an increased on-site safety level. A group-randomised double-blinded case study of six Danish construction sites (three intervention sites and three control sites). The recruitment of the construction sites is performed continuously from January 2010 to June 2010. The investigation of each site lasts 20 continuous weeks. Confirmatory statistical analysis is used to test if the safety level increased, and if the probability of safety communications between management and coworkers increases as a consequence of the intervention. The data collection will be blinded. Qualitative methods are used to evaluate if communication and interactions about safety at all managerial levels, including the client, increase. (1) The proportion of safety-related communications out of all studied communications between management and coworkers. (2) The safety level index of the construction sites.

Understanding the relationship between safety culture dimensions and safety performance of construction projects through partial least square method

NASA Astrophysics Data System (ADS)

Latief, Yusuf; Machfudiyanto, Rossy A.; Arifuddin, Rosmariani; Yogiswara, Yoko

2017-03-01

Based on the data, 32% of accidental cases in Indonesia occurs on constructional sectors. It is supported by the data from Public Work and Housing Department that 27.43% of the implementation level of Safety Management System policy at construction companies in Indonesia remains unsafe categories. Moreover, there are dimensions of occupational safety culture formed including leadership, behavior, strategy, policy, process, people, safety cost, value and contract system. The aim of this study is to determine the model of an effective safety culture and know the relationship between dimensions in construction industry. The method used in this research was questionnaire survey which was distributed to the sample of construction companies either in a national private one in Indonesia. The result of this research is supposed to be able to illustrate the development of the relationship among occupational safety culture dimensions which have influences to the performances of constructional companies in Indonesia.

Young workers in the construction industry and initial OSH-training when entering work life.

PubMed

Holte, Kari Anne; Kjestveit, Kari

2012-01-01

Studies have found that young workers are at risk for injuries. The risk for accidents is high within construction, indicating that young workers may be especially vulnerable in this industry. In Norway, it is possible to enter the construction industry as a full time worker at the age of 18. The aim of this paper was to explore how young construction workers are received at their workplace with regards to OHS-training. The study was designed as a qualitative case study. Each case consisted of a young worker or apprentice (< 25 years), a colleague, the immediate superior, the OHS manager, and a safety representative in the company. The interviews were recorded and analyzed through content analysis. The results showed that there were differences between large and small companies, where large companies had more formalized routines and systems for receiving and training young workers. These routines were however more dependent on requirements set by legislators and contractors more than by company size, since the legislation has different requirements with impact on OHS.

77 FR 25080 - Safety Zones; TriMet Bridge Project, Willamette River, Portland, OR

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-27

...-AA00 Safety Zones; TriMet Bridge Project, Willamette River, Portland, OR AGENCY: Coast Guard, DHS... trestles and construction cranes involved in the construction of the TriMet Bridge on the Willamette River... project. These safety zones replace the prior safety zones established for the TriMet Bridge construction...

A case-control study of eye injuries in the workplace in Hong Kong.

PubMed

Yu, Tak Sun Ignatius; Liu, Hongjie; Hui, Karen

2004-01-01

Eye injury in the workplace is common worldwide. This study proposed to explore both risk and preventive factors re eye injuries in Hong Kong. Case-control study. A total of 239 work-related eye injury patients, and 253 subjects without a history of any eye injury as controls. Patients with all incident cases of work-related eye injuries attending the ophthalmology clinics of 3 major public hospitals in Hong Kong during the first 3 months of 2000 were invited to participate. Controls were selected from the general population and were frequency matched to patients based on gender. Patients were interviewed face-to-face by trained interviewers in the ophthalmology clinics, using a structured questionnaire. Telephone interviews were used for controls. Risk and protective factors associated with eye injuries. Among eye injury cases, 158 patients (66.1%) reported having incurred 1 episode of eye injury during employment, 49 (20.5%) having suffered 2 episodes, and 32 (13.4%) having experienced >/==" BORDER="0">3 eye injuries at work. Most of the patients (85.4%) did not wear any protective devices at the time of injury. Subjects who wore safety glasses regularly were less likely to have eye injuries (odds ratio [OR] = 0.29, 95% confidence interval [CI] = 0.14-0.62). Having a safety requirement for wearing safety glasses was negatively associated with eye injuries (OR = 0.31, 95% CI = 0.15-0.62). Multivariate analysis indicated that exposures to certain work hazards and working in the construction industry were positively associated with eye injuries. Subjects who worked longer in their current job, who reported having received job safety training before employment, or whose machines or equipment were maintained or repaired regularly by employers were at lower risk of experiencing eye injuries. Construction workers and those exposed to multiple hazards may get eye injuries at work. They should be provided with protective devices that are effective in preventing such exposures. Health education and safety training are important in preventing eye injuries. Maintenance and repair of machines and equipment may effectively reduce or eliminate the sources of exposures.

Analysis of noise on construction sites of high-rise buildings.

PubMed

Barkokébas, Béda; Vasconcelos, Bianca M; Lago, Eliane Maria G; Alcoforador, Aline Fabiana P

2012-01-01

In the civil construction industry sector, it has been observed that the increasing use of machines has made tasks noisier and consequently caused hearing loss and had other adverse effects on workers. The objective of this study was to identify and assess the physical risks of noise present in activities undertaken in a construction company in order to propose control measures which will contribute to the management of health and safety within the company's organization. The methodology applied was based on verifying the characteristics of exposure to noise on construction sites, from an observation of sources which generated noise and making measurements of sound pressure levels emitted by these sources. The data was then analyzed and compared with the recommended performance levels established in control measures. As a result, it was found that some machines and equipment used in civil construction often generate noise above the acceptable levels and as such, in these cases, various control measures have been proposed. It is believed that the use of management techniques is the most effective way to assess risk and to implement the preventive and corrective actions proposed, and allows for the analysis of sound pressure levels on an ongoing basis.

A review on the benchmarking concept in Malaysian construction safety performance

NASA Astrophysics Data System (ADS)

Ishak, Nurfadzillah; Azizan, Muhammad Azizi

2018-02-01

Construction industry is one of the major industries that propels Malaysia's economy in highly contributes to our nation's GDP growth, yet the high fatality rates on construction sites have caused concern among safety practitioners and the stakeholders. Hence, there is a need of benchmarking in performance of Malaysia's construction industry especially in terms of safety. This concept can create a fertile ground for ideas, but only in a receptive environment, organization that share good practices and compare their safety performance against other benefit most to establish improvement in safety culture. This research was conducted to study the awareness important, evaluate current practice and improvement, and also identify the constraint in implement of benchmarking on safety performance in our industry. Additionally, interviews with construction professionals were come out with different views on this concept. Comparison has been done to show the different understanding of benchmarking approach and how safety performance can be benchmarked. But, it's viewed as one mission, which to evaluate objectives identified through benchmarking that will improve the organization's safety performance. Finally, the expected result from this research is to help Malaysia's construction industry implement best practice in safety performance management through the concept of benchmarking.

Dams, Hydrology and Risk in Future River Management

NASA Astrophysics Data System (ADS)

Wegner, D. L.

2017-12-01

Across America there are over 80,000 large to medium dams and globally the number is in excess of 800,000. Currently there are over 1,400 dams and diversion structures being planned or under construction globally. In addition to these documented dams there are thousands of small dams populating watersheds. Governments, agencies, native tribes, private owners and regulators all have a common interest in safe dams. Often dam safety is characterized as reducing structural risk while providing for maximum operational flexibility. In the 1970's there were a number of large and small dam failures in the United States. These failures prompted the federal government to issue voluntary dam safety guidelines. These guidelines were based on historic information incorporated into a risk assessment process to analyze, evaluate and manage risk with the goal to improve the quality of and support of dam management and safety decisions. We conclude that historic and new risks need to be integrated into dam management to insure adequate safety and operational flexibility. A recent assessment of the future role of dams in the United States premises that future costs such as maintenance or removal beyond the economic design life have not been factored into the long-term operations or relicensing of dams. The converging risks associated with aging water storage infrastructure, multiple dams within watersheds and uncertainty in demands policy revisions and an updated strategic approach to dam safety. Decisions regarding the future of dams in the United States may, in turn, influence regional water planning and management. Leaders in Congress and in the states need to implement a comprehensive national water assessment and a formal analysis of the role dams play in our water future. A research and national policy agenda is proposed to assess future impacts and the design, operation, and management of watersheds and dams.

4D modeling in high-rise construction

NASA Astrophysics Data System (ADS)

Balakina, Anastasiya; Simankina, Tatyana; Lukinov, Vitaly

2018-03-01

High-rise construction is a complex construction process, requiring the use of more perfected and sophisticated tools for design, planning and construction management. The use of BIM-technologies allows minimizing the risks associated with design errors and errors that occur during construction. This article discusses a visual planning method using the 4D model, which allows the project team to create an accurate and complete construction plan, which is much more difficult to achieve with the help of traditional planning methods. The use of the 4D model in the construction of a 70-story building allowed to detect spatial and temporal errors before the start of construction work. In addition to identifying design errors, 4D modeling has allowed to optimize the construction, as follows: to optimize the operation of cranes, the placement of building structures and materials at various stages of construction, to optimize the organization of work performance, as well as to monitor the activities related to the preparation of the construction site for compliance with labor protection and safety requirements, which resulted in saving money and time.

Visual warning system for worker safety on roadside work-zones.

DOT National Transportation Integrated Search

2016-08-01

Growing traffic on US roadways and heavy construction machinery on road construction sites pose a critical safety : threat to construction workers. This report summarizes the design and development of a worker safety system using : Dedicated Short Ra...

Development of an Integrative Program of Nanosafety: Promote the Coordination Between Industries and Risk Assessor

NASA Astrophysics Data System (ADS)

Emond, Claude; Kouassi, Serge; Schuster, Frédéric

2013-04-01

Nanomaterials are widely present in many industrial sectors (e.g., chemical, biomedical, environment), and their application is expected to significantly expand in the coming years. However, nanomaterial use raises many questions about the potential risks to human health and the environment and, more specifically, to occupational health. The available literature supports the ability of the lung, gastrointestinal tract, and skin to act as significant barriers against systemic exposure to many nanomaterials. However, because a potential risk issue exists about the toxicity of nanomaterials to the biological material, tools need to be developed for improving the risk management of the regulators. The goal is to develop a tool that examines the current knowledge base regarding the health risks posed by engineered nanoparticles to improve nanotechnology safety prior to the marketing phase. The approach proposed during this work was to establish a safety assessment constructed on a decision-control pathway regarding nanomaterial production and consumer's product to integrate different aspects. These aspects include: (1) primarily research and identification of the nanomaterial base of physicochemical properties, toxicity, and application; (2) the occupational exposure risk during the manufacturing process; (3) and the engineered nanomaterial upon the consumer product. This approach provides important parameters to reduce the uncertainty related to the production of nanomaterials prior their commercialization, reduce the reluctance from the industry, and provide a certification tool of sanitary control for the regulators. This work provides a better understanding of a critical issue of nanomaterials and consumer safety.

Effects of risk communication on natural hazards on real estate owners' risk perception and risk behaviour

NASA Astrophysics Data System (ADS)

Buchecker, M.; Maidl, E.

2012-04-01

In the last decade, in most of the European countries risk maps on natural hazards have been elaborated but there is so far little experience how to efficiently communicate these maps to the public. Recently, the public authorities of Zurich informed the owners of buildings located within the hazard zone on urban flood risks The owners received official letters containing information on potential danger, the probability of flood events, constructional safety measures, and guidelines for appropriate actions in case of an immediate flood. In the cover letter they were also encouraged to achieve more detailed information about the particular risks for their building using an online accessible risk map within a geographic information system (GIS). This risk communication campaign was based on the expectation that informing citizens increases their risk awareness and that citizens aware of risks are more likely to undertake actions to protect themselves and their property. There is, however, little empirical evidence that these expected outcomes can be achieved by written forms of risk communication. With this project we aim to find out to which degree a campaign of written risk communication can shape land owners risk perception and risk behaviour, and which other factors (e.g. trust in authorities, risk, risk zone category of the building) contributed to these outcomes... In collaboration with public authorities we conducted a survey among 1500 owners of buildings in the hazard zones in Zurich (50 % in blue zone, 50 % in yellow and yellow-white zone), that is 14% of all persons who were addressed by the authorities of the city. The standardized questionnaire comprises in particular items measuring respondents' evaluation of the virtual and physical information material, the time they spent for studying the information material, the dimensions of their risk perception, their acceptability of risks and their preparedness to implement constructional and other safety measures. The return rate achieved about 20 %. The data were analysed using multivariate statistics. The analysis of the data revealed that most of the real estate owners respond spent only very little time for studying the flood risk information. It, however, confirmed that respondents' interest in the subject and their efforts and time spent to study the information material strongly correlated with their willingness to undertake preventive actions. The results provide also insights on additional factors that influence citizens' preparedness to implement safety measures. For instance, respondents who consider the distribution of responsibility between the public and private sphere to be rather unjust, are less motivated to take measures. The results will be discussed and implication for practice and future research will be drawn.

46 CFR 31.40-5 - Cargo Ship Safety Construction Certificate-T/ALL.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Cargo Ship Safety Construction Certificate-T/ALL. 31.40... CERTIFICATION Certificates Under International Convention for Safety of Life at Sea, 1974 § 31.40-5 Cargo Ship... a Cargo Ship Safety Construction Certificate. This certificate shall be issued by the U.S. Coast...

46 CFR 31.40-5 - Cargo Ship Safety Construction Certificate-T/ALL.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 1 2011-10-01 2011-10-01 false Cargo Ship Safety Construction Certificate-T/ALL. 31.40... CERTIFICATION Certificates Under International Convention for Safety of Life at Sea, 1974 § 31.40-5 Cargo Ship... a Cargo Ship Safety Construction Certificate. This certificate shall be issued by the U.S. Coast...

46 CFR 31.40-5 - Cargo Ship Safety Construction Certificate-T/ALL.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 1 2013-10-01 2013-10-01 false Cargo Ship Safety Construction Certificate-T/ALL. 31.40... CERTIFICATION Certificates Under International Convention for Safety of Life at Sea, 1974 § 31.40-5 Cargo Ship... a Cargo Ship Safety Construction Certificate. This certificate shall be issued by the U.S. Coast...

46 CFR 31.40-5 - Cargo Ship Safety Construction Certificate-T/ALL.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 1 2014-10-01 2014-10-01 false Cargo Ship Safety Construction Certificate-T/ALL. 31.40... CERTIFICATION Certificates Under International Convention for Safety of Life at Sea, 1974 § 31.40-5 Cargo Ship... a Cargo Ship Safety Construction Certificate. This certificate shall be issued by the U.S. Coast...

46 CFR 31.40-5 - Cargo Ship Safety Construction Certificate-T/ALL.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 1 2012-10-01 2012-10-01 false Cargo Ship Safety Construction Certificate-T/ALL. 31.40... CERTIFICATION Certificates Under International Convention for Safety of Life at Sea, 1974 § 31.40-5 Cargo Ship... a Cargo Ship Safety Construction Certificate. This certificate shall be issued by the U.S. Coast...

78 FR 37969 - Safety Zone; South Park Bridge Construction, Lower Duwamish Waterway, Seattle, WA

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-25

...-AA00 Safety Zone; South Park Bridge Construction, Lower Duwamish Waterway, Seattle, WA AGENCY: Coast... zone in the lower Duwamish Waterway around the South Park Bridge in Seattle, Washington for the re-construction of the bridge. The safety zone is necessary to ensure the safety of the maritime public and...

77 FR 70891 - Safety Zone; Bay Bridge Construction, San Francisco Bay, San Francisco, CA

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-28

...-AA00 Safety Zone; Bay Bridge Construction, San Francisco Bay, San Francisco, CA AGENCY: Coast Guard... the navigable waters of the San Francisco Bay near Yerba Buena Island, CA in support of the Bay Bridge... construction of the Bay Bridge, the safety zone is necessary to provide for the safety of mariners transiting...

CSHM: Web-based safety and health monitoring system for construction management.

PubMed

Cheung, Sai On; Cheung, Kevin K W; Suen, Henry C H

2004-01-01

This paper describes a web-based system for monitoring and assessing construction safety and health performance, entitled the Construction Safety and Health Monitoring (CSHM) system. The design and development of CSHM is an integration of internet and database systems, with the intent to create a total automated safety and health management tool. A list of safety and health performance parameters was devised for the management of safety and health in construction. A conceptual framework of the four key components of CSHM is presented: (a) Web-based Interface (templates); (b) Knowledge Base; (c) Output Data; and (d) Benchmark Group. The combined effect of these components results in a system that enables speedy performance assessment of safety and health activities on construction sites. With the CSHM's built-in functions, important management decisions can theoretically be made and corrective actions can be taken before potential hazards turn into fatal or injurious occupational accidents. As such, the CSHM system will accelerate the monitoring and assessing of performance safety and health management tasks.

Risk management of liquefied natural gas installations

NASA Technical Reports Server (NTRS)

Fedor, O. H.; Parsons, W. N.; Coutinho, J. De C.

1976-01-01

In connection with the construction of four major liquefied natural gas (LNG) facilities in New York City, the New York City Fire Commissioner has asked NASA for assistance. It was decided that the Kennedy Space Center should develop a risk management system (RMS) for the use of the New York Fire Department (NYFD). The RMS provides for a published set of safety regulations by the NYFD. A description of the RMS is presented as an example of an application of aerospace technology to a civilian sector, namely LNG facilities.

75 FR 80315 - Compliance Directive for Fall Protection in Residential Construction

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-22

... DEPARTMENT OF LABOR Occupational Safety and Health Administration 29 CFR Part 1926 Compliance Directive for Fall Protection in Residential Construction AGENCY: Occupational Safety and Health... Protection Compliance Directive for Residential Construction. SUMMARY: The Occupational Safety and Health...

Safety in Construction Using Virtual Reality (SAVR): A Model for Labor Safety. Working Paper Series WP-022.

ERIC Educational Resources Information Center

Hadipriono, Fabian C.; And Others

An interactive training model called SAVR (Safety in Construction Using Virtual Reality) was developed to train construction students, novice engineers, and construction workers to prevent falls from scaffolding. The model was implemented in a graphics supercomputer, the ONYX Reality Engine2. The SAVR model provides trainees with an immersive,…

Data Analysis Approaches for the Risk-Informed Safety Margins Characterization Toolkit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mandelli, Diego; Alfonsi, Andrea; Maljovec, Daniel P.

2016-09-01

In the past decades, several numerical simulation codes have been employed to simulate accident dynamics (e.g., RELAP5-3D, RELAP-7, MELCOR, MAAP). In order to evaluate the impact of uncertainties into accident dynamics, several stochastic methodologies have been coupled with these codes. These stochastic methods range from classical Monte-Carlo and Latin Hypercube sampling to stochastic polynomial methods. Similar approaches have been introduced into the risk and safety community where stochastic methods (such as RAVEN, ADAPT, MCDET, ADS) have been coupled with safety analysis codes in order to evaluate the safety impact of timing and sequencing of events. These approaches are usually calledmore » Dynamic PRA or simulation-based PRA methods. These uncertainties and safety methods usually generate a large number of simulation runs (database storage may be on the order of gigabytes or higher). The scope of this paper is to present a broad overview of methods and algorithms that can be used to analyze and extract information from large data sets containing time dependent data. In this context, “extracting information” means constructing input-output correlations, finding commonalities, and identifying outliers. Some of the algorithms presented here have been developed or are under development within the RAVEN statistical framework.« less

Time pressure in scenario-based online construction safety quizzes and its effect on students' performance

NASA Astrophysics Data System (ADS)

Jaeger, Martin; Adair, Desmond

2017-05-01

Online quizzes have been shown to be effective learning and assessment approaches. However, if scenario-based online construction safety quizzes do not include time pressure similar to real-world situations, they reflect situations too ideally. The purpose of this paper is to compare engineering students' performance when carrying out an online construction safety quiz with time pressure versus an online construction safety quiz without time pressure. Two versions of an online construction safety quiz are developed and administered to randomly assigned engineering students based on a quasi-experimental post-test design. The findings contribute to scenario-based learning and assessment of construction safety in four ways. First, the results confirm earlier findings that 'intrinsic stress' does not seem to impair students' performance. Second, students who carry out the online construction safety quiz with time pressure are less likely to 'learn by trial and error'. Third, students exposed to time pressure appreciate that they become better prepared for real life. Finally, preparing students to work under time pressure is an important industry requirement. The results of this study should encourage engineering educators to explore and implement ways to include time pressure in scenario-based online quizzes and learning.

Logistic Regression in the Identification of Hazards in Construction

NASA Astrophysics Data System (ADS)

Drozd, Wojciech

2017-10-01

The construction site and its elements create circumstances that are conducive to the formation of risks to safety during the execution of works. Analysis indicates the critical importance of these factors in the set of characteristics that describe the causes of accidents in the construction industry. This article attempts to analyse the characteristics related to the construction site, in order to indicate their importance in defining the circumstances of accidents at work. The study includes sites inspected in 2014 - 2016 by the employees of the District Labour Inspectorate in Krakow (Poland). The analysed set of detailed (disaggregated) data includes both quantitative and qualitative characteristics. The substantive task focused on classification modelling in the identification of hazards in construction and identifying those of the analysed characteristics that are important in an accident. In terms of methodology, resource data analysis using statistical classifiers, in the form of logistic regression, was the method used.

Use of safety management practices for improving project performance.

PubMed

Cheng, Eddie W L; Kelly, Stephen; Ryan, Neal

2015-01-01

Although site safety has long been a key research topic in the construction field, there is a lack of literature studying safety management practices (SMPs). The current research, therefore, aims to test the effect of SMPs on project performance. An empirical study was conducted in Hong Kong and the data collected were analysed with multiple regression analysis. Results suggest that 3 of the 15 SMPs, which were 'safety committee at project/site level', 'written safety policy', and 'safety training scheme' explained the variance in project performance significantly. Discussion about the impact of these three SMPs on construction was provided. Assuring safe construction should be an integral part of a construction project plan.

The impact of a peer-led participatory health and safety training program for Latino day laborers in construction.

PubMed

Williams, Quintin; Ochsner, Michele; Marshall, Elizabeth; Kimmel, Louis; Martino, Carmen

2010-06-01

Immigrant Latino day laborers working in residential construction are at particularly high risk of fatal and non-fatal traumatic injury and benefit from targeted training. To understand the impact of a participatory, peer-facilitated health and safety awareness training customized to the needs of Latino day laborers. Baseline surveys exploring exposures, PPE use, attitudes, work practices and work-related injuries were collected from more than 300 New Jersey Latino day laborers in construction prior to their participation in a one day (minimum of six hour) Spanish language health and safety training class. The classes, led by trained worker trainers, engaged participants in a series of tasks requiring teamwork and active problem solving focused on applying safe practices to situations they encounter at their worksites. Follow-up surveys were difficult to obtain among mobile day laborers, and were collected from 70 men (22% response rate) 2-6 months following training. Chi-square analysis was used to compare pre- and post-intervention PPE use, self protective actions, and self-reported injury rates. Focus groups and in-depth interviews addressing similar issues provided a context for discussing the survey findings. At baseline, the majority of day laborers who participated in this study reported great concern about the hazards of their work and were receptive to learning about health and safety despite limited influence over employers. Changes from baseline to follow-up revealed statistically significant differences in the use of certain types of PPE (hard hats, work boots with steel toes, safety harnesses, and visible safety vests), and in the frequency of self-protective work practices (e.g., trying to find out more about job hazards on your own). There was also a suggestive decrease in self-reported injuries (receiving an injury at work serious enough that you had to stop working for the rest of the day) post-training based on small numbers. Sixty-six percent of workers surveyed post-training reported sharing information from their safety workbook with friends and co-workers. Focus groups and interview results generally confirmed the quantitative findings. Participatory, peer led training tailored to the needs of construction day laborers may have a positive effect on Latino immigrant workers' attitudes, work practices, and self reported injury rates, but major changes would require employer engagement. Health and safety researchers have identified reducing the number of traumatic injuries among the immigrant construction workforce as an increasingly important priority. This project provides one model for collaboration between university-based researchers, a union, and a community-based organization. The specific elements of this project-participatory curriculum customized to the needs of day laborers in residential construction, training day laborers to facilitate training classes, and involving peer leaders in outreach and research-could be adapted by other organizations. The findings of this study suggest that the Latino day laborers have a strong interest in and some ability to act on health and safety information. Widespread implementation of this type of training, especially if supported with cooperation from residential contractors, could lead to reduced rates of traumatic injury in the residential construction industry. (c) 2010 National Safety Council. Published by Elsevier Ltd. All rights reserved.

Gendered Safety and Health Risks in the Construction Trades.

PubMed

Curtis, Hannah M; Meischke, Hendrika; Stover, Bert; Simcox, Nancy J; Seixas, Noah S

2018-04-18

Despite women's increased representation in the overall workforce, construction remains a male-dominated industry. Prior studies have noted that the hazardous workplace environment combined with a culture that can be discriminatory and openly hostile can threaten women workers' health and safety. However, little information exists about the current physical and psychosocial hazards at work affecting tradeswomen. We examined differences in workplace exposure between women and men, and the association of these exposures with self-reported stress and work injury, in order to highlight how gendered conditions of work negatively affect tradeswomen's health. A holistic view of health that included the influence of both home and work spheres as well as hazards related to women's social experience was considered. Almost 300 workers (198 tradeswomen and 93 tradesmen) throughout Washington State completed surveys. We used descriptive statistics to compare exposures between genders, and logistic regression to model the association between psychosocial exposures and injury and stress outcomes. We found that women were significantly more likely than men to report high perceived stress (31 and 18%, respectively) and being injured at work in the past year (31 and 12%, respectively). Ten of the 12 work-related psychosocial exposures were found to be associated with either stress (job strain, gender and age discrimination, bullying, work/life balance, isolation, sexual harassment, safety climate, and social support) or injury (gender discrimination, bullying, overcompensation, and sexual harassment) for women. The industry continues to lag in supporting tradeswomen's health and safety needs. This study suggests that multiple exposures (including discrimination, overcompensation, and work/life balance) have an important impact on worker well-being. The findings underscore the complex interaction of gender, psychosocial exposures, and occupational risks, and indicate areas for intervention.

Safety incentive and penalty provisions in Indian construction projects and their impact on safety performance.

PubMed

Hasan, Abid; Jha, Kumar Neeraj

2013-01-01

Safety incentive and penalty (I/P) provisions in construction contracts are one of the most common forms of I/P. Contradictory opinions on the effectiveness of these provisions have been expressed in the literature. Statistics on safety provisions were collected from 32 construction projects, which include both types of contracts - those with safety I/P provisions and those without them. Although inclusion of safety I/P provisions in contracts helps in improving the overall safety performance in construction projects, further scope for improvement still exists. Literature review and structured personal interviews, coupled with a survey based on preliminary questionnaire, revealed that successful formulation and implementation of such provisions are dependent on 25 attributes which need the attention of both clients and contractors. A questionnaire-based survey was conducted to evaluate these attributes. The six factors extracted by carrying out factor analysis are: incentive distribution method, proper labour training, special attention to risky situations, role of safety committee and sub-contractors, specialised works and safety equipments, and right form of I/P. If taken care of, these attributes have the potential to improve the safety performance in construction projects. The results would be useful to clients and contractors in implementing the safety I/P provisions and thereby improving safety performance.

75 FR 13232 - Safety Zone; Lake Mead Intake Construction, Lake Mead, Boulder City, NV

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-19

...-AA00 Safety Zone; Lake Mead Intake Construction, Lake Mead, Boulder City, NV AGENCY: Coast Guard, DHS... waters of Lake Mead in support of the construction project for Lake Mead's Intake 3. This safety zone is... for the placement of an Intake Pipe from Lake Mead throughout 2010. This safety zone is necessary to...

15 CFR 270.1 - Description of rule; purpose; applicability.

Code of Federal Regulations, 2013 CFR

2013-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS General § 270.1 Description of rule; purpose; applicability. (a) The National Construction Safety Team Act (the Act) (Pub. L. 107-231) provides for the establishment of...

15 CFR 270.1 - Description of rule; purpose; applicability.

Code of Federal Regulations, 2012 CFR

2012-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS General § 270.1 Description of rule; purpose; applicability. (a) The National Construction Safety Team Act (the Act) (Pub. L. 107-231) provides for the establishment of...

76 FR 64326 - National Construction Safety Team Advisory Committee Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-18

... Team Advisory Committee Meeting AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of open meeting. SUMMARY: The National Construction Safety Team (NCST) Advisory... INFORMATION: The Committee was established pursuant to Section 11 of the National Construction Safety Team Act...

15 CFR 270.1 - Description of rule; purpose; applicability.

Code of Federal Regulations, 2014 CFR

2014-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS General § 270.1 Description of rule; purpose; applicability. (a) The National Construction Safety Team Act (the Act) (Pub. L. 107-231) provides for the establishment of...

15 CFR 270.1 - Description of rule; purpose; applicability.

Code of Federal Regulations, 2010 CFR

2010-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS General § 270.1 Description of rule; purpose; applicability. (a) The National Construction Safety Team Act (the Act) (Pub. L. 107-231) provides for the establishment of...

15 CFR 270.1 - Description of rule; purpose; applicability.

Code of Federal Regulations, 2011 CFR

2011-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS General § 270.1 Description of rule; purpose; applicability. (a) The National Construction Safety Team Act (the Act) (Pub. L. 107-231) provides for the establishment of...

Stories to Communicate Risks about Tobacco: Development of a Brief Scale to Measure Transportation into a Video Story--The ACCE Project

ERIC Educational Resources Information Center

Williams, Jessica H.; Green, Melanie C.; Kohler, Connie; Allison, Jeroan J.; Houston, Thomas K.

2011-01-01

Objective: To evaluate the construct and criterion validity of the Video Transportation Scale (VTS). Setting: Inpatient service of a safety net hospital in Birmingham, Alabama, USA. Method: We administered the VTS in the context of a randomized controlled trial of a DVD-delivered narrative-based intervention (stories) designed to encourage smoking…

Analysis of Material Handling Safety in Construction Sites and Countermeasures for Effective Enhancement

PubMed Central

Anil Kumar, C. N.; Sakthivel, M.; Elangovan, R. K.; Arularasu, M.

2015-01-01

One of many hazardous workplaces includes the construction sites as they involve several dangerous tasks. Many studies have revealed that material handling equipment is a major cause of accidents at these sites. Though safety measures are being followed and monitored continuously, accident rates are still high as either workers are unaware of hazards or the safety regulations are not being strictly followed. This paper analyses the safety management systems at construction sites through means of questionnaire surveys with employees, specifically referring to safety of material handling equipment. Based on results of the questionnaire surveys, two construction sites were selected for a safety education program targeting worker safety related to material handling equipment. Knowledge levels of the workers were gathered before and after the program and results obtained were subjected to a t-test analysis to mark significance level of the conducted safety education program. PMID:26446572

Investigation and identification of factors affecting migrating peasant workers' usage of safety footwear in the Chinese construction industry.

PubMed

Suo, Qinghui; Zhang, Daming

2017-09-01

A sample of 300 migrating peasant workers from 15 Chinese building construction sites completed a demographic questionnaire to investigate the usage of safety footwear. The survey form was constructed based on the theory of planned behaviour, and a total of 12 questions focusing on the workers' past experience, attitudes, subjective norms and perceived behavioural control were included in the survey. It was found that 92% of the participants did not wear safety footwear while working on construction sites, although more than 91% of them believed that safety footwear would protect the foot from injury; none of the participants had been provided free safety footwear by their employer. Regression analysis shows that employers' attitude is the most important factor affecting their usage of safety footwear, 'providing free safety footwear' and 'comfortability of the safety footwear' ranking second and third respectively.

Workers' safety in the construction industry in the southern West Bank of Palestine.

PubMed

Al-Sari, M I; Al-Khatib, I A

2012-10-01

There are few data about safety in the construction industry in Palestine. The main aim of the study was to assess worker's experiences and perceptions of safety at construction sites in Hebron and Bethlehem governorates of the West Bank. A structured questionnaire was completed through direct interviews with 349 construction workers. Of the respondents, 34.6% had experienced work-related accidents, 13.0% and 65.6% indicated that their workplace did not have a first-aid kit or trained first-aid specialist respectively, 35.8% reported that their work sites did not have safety tools and 83.7% had not received safety training. Workers perceived that awareness and training were the most frequent factor affecting workers' safety, with the foreman position having the greatest impact on the workers' safety. Greater enforcement of the current Palestinian safety laws is needed.

Using game technologies to improve the safety of construction plant operations.

PubMed

Guo, Hongling; Li, Heng; Chan, Greg; Skitmore, Martin

2012-09-01

Many accidents occur world-wide in the use of construction plant and equipment, and safety training is considered by many to be one of the best approaches to their prevention. However, current safety training methods/tools are unable to provide trainees with the hands-on practice needed. Game technology-based safety training platforms have the potential to overcome this problem in a virtual environment. One such platform is described in this paper - its characteristics are analysed and its possible contribution to safety training identified. This is developed and tested by means of a case study involving three major pieces of construction plant, which successfully demonstrates that the platform can improve the process and performance of the safety training involved in their operation. This research not only presents a new and useful solution to the safety training of construction operations, but illustrates the potential use of advanced technologies in solving construction industry problems in general. Copyright © 2011 Elsevier Ltd. All rights reserved.

The use of a task-based exposure assessment model (T-BEAM) for assessment of metal fume exposures during welding and thermal cutting.

PubMed

Susi, P; Goldberg, M; Barnes, P; Stafford, E

2000-01-01

Elevated disease rates have been documented among construction workers for cancer, pneumonoconiosis, asbestosis, and silicosis. However, methodologies for exposure assessment in construction are not well described in the U.S. literature. Working through a cooperative agreement with the National Institute for Occupational Safety and Health (NIOSH), the Center to Protect Workers' Rights--a research arm of the Building and Construction Trades Department, AFL-CIO--has developed and used a "Task-Based Exposure Assessment Model (T-BEAM)" for construction. The characteristic elements of T-BEAM are: (1) an emphasis on the identification, implementation, and evaluation of engineering and work practice controls; and (2) use of experienced, specially trained construction workers (construction safety and health specialists) in the exposure assessment process. A task-based approach was used because tasks, or specialized skills, form the single greatest thread of continuity in the dynamic environment of construction. Workers in the construction industry come from several crafts and are typically employed by a large number of contractors throughout their career. Project types (e.g., residential or industrial rehabilitation) are also highly variable and present unique health risks. Finally, because construction involves building, renovating, or dismantling physical surroundings, the work site is constantly changing. Between 1995 and 1996, T-BEAM was applied to the collection of approximately 200 personal exposure measurements associated with "hot work tasks"--welding and thermal cutting. Data were collected with the assistance of specially trained, journeyman ironworkers, pipe fitters, and boilermakers on nine construction sites located throughout the United States. Portable local exhaust ventilation was provided to participating contractors with the intent of measuring its impact on exposure. Results indicate that data collected in a standardized, systematic fashion from multiple work sites can be used to characterize exposures among sampled trades. Comparison of results to American Conference of Governmental Industrial Hygienists (ACGIH) threshold limit values (TLVs) demonstrate a significant health hazard among sampled trades posed by welding and thermal cutting fume, manganese, nickel, and chromium VI. Direct estimates of the probability of exceeding the ACGIH TLV for respirable particulate suggests that boilermakers (100%) and ironworkers (71%) are at greatest risk. Other task variables evaluated with respect to exposure include task, whether work was performed indoors or outdoors, intermittency of work, and use of ventilation. Use of local or mechanical ventilation reduced mean exposures to fumes significantly.

Evaluation of Safety, Quality and Productivity in Construction

NASA Astrophysics Data System (ADS)

Usmen, M. A.; Vilnitis, M.

2015-11-01

This paper examines the success indicators of construction projects, safety, quality and productivity, in terms of their implications and impacts during and after construction. First safety is considered during construction with a focus on hazard identification and the prevention of occupational accidents and injuries on worksites. The legislation mandating safety programs, training and compliance with safety standards is presented and discussed. Consideration of safety at the design stage is emphasized. Building safety and the roles of building codes in prevention of structural failures are also covered in the paper together with factors affecting building failures and methods for their prevention. Quality is introduced in the paper from the perspective of modern total quality management. Concepts of quality management, quality control, quality assurance and Six Sigma and how they relate to building quality and structural integrity are discussed with examples. Finally, productivity concepts are presented with emphasis on effective project management to minimize loss of productivity, complimented by lean construction and lean Six Sigma principles. The paper concludes by synthesizing the relationships between safety, quality and productivity.

A qualitative case study of child protection issues in the Indian construction industry: investigating the security, health, and interrelated rights of migrant families

PubMed Central

2013-01-01

Background Many of India’s estimated 40 million migrant workers in the construction industry migrate with their children. Though India is undergoing rapid economic growth, numerous child protection issues remain. Migrant workers and their children face serious threats to their health, safety, and well-being. We examined risk and protective factors influencing the basic rights and protections of children and families living and working at a construction site outside Delhi. Methods Using case study methods and a rights-based model of child protection, the SAFE model, we triangulated data from in-depth interviews with stakeholders on and near the site (including employees, middlemen, and managers); 14 participants, interviews with child protection and corporate policy experts in greater Delhi (8 participants), and focus group discussions (FGD) with workers (4 FGDs, 25 members) and their children (2 FGDs, 9 members). Results Analyses illuminated complex and interrelated stressors characterizing the health and well-being of migrant workers and their children in urban settings. These included limited access to healthcare, few educational opportunities, piecemeal wages, and unsafe or unsanitary living and working conditions. Analyses also identified both protective and potentially dangerous survival strategies, such as child labor, undertaken by migrant families in the face of these challenges. Conclusions By exploring the risks faced by migrant workers and their children in the urban construction industry in India, we illustrate the alarming implications for their health, safety, livelihoods, and development. Our findings, illuminated through the SAFE model, call attention to the need for enhanced systems of corporate and government accountability as well as the implementation of holistic child-focused and child-friendly policies and programs in order to ensure the rights and protection of this hyper-mobile, and often invisible, population. PMID:24044788

A qualitative case study of child protection issues in the Indian construction industry: investigating the security, health, and interrelated rights of migrant families.

PubMed

Betancourt, Theresa S; Shaahinfar, Ashkon; Kellner, Sarah E; Dhavan, Nayana; Williams, Timothy P

2013-09-17

Many of India's estimated 40 million migrant workers in the construction industry migrate with their children. Though India is undergoing rapid economic growth, numerous child protection issues remain. Migrant workers and their children face serious threats to their health, safety, and well-being. We examined risk and protective factors influencing the basic rights and protections of children and families living and working at a construction site outside Delhi. Using case study methods and a rights-based model of child protection, the SAFE model, we triangulated data from in-depth interviews with stakeholders on and near the site (including employees, middlemen, and managers); 14 participants, interviews with child protection and corporate policy experts in greater Delhi (8 participants), and focus group discussions (FGD) with workers (4 FGDs, 25 members) and their children (2 FGDs, 9 members). Analyses illuminated complex and interrelated stressors characterizing the health and well-being of migrant workers and their children in urban settings. These included limited access to healthcare, few educational opportunities, piecemeal wages, and unsafe or unsanitary living and working conditions. Analyses also identified both protective and potentially dangerous survival strategies, such as child labor, undertaken by migrant families in the face of these challenges. By exploring the risks faced by migrant workers and their children in the urban construction industry in India, we illustrate the alarming implications for their health, safety, livelihoods, and development. Our findings, illuminated through the SAFE model, call attention to the need for enhanced systems of corporate and government accountability as well as the implementation of holistic child-focused and child-friendly policies and programs in order to ensure the rights and protection of this hyper-mobile, and often invisible, population.

Are green building features safe for preventive maintenance workers? Examining the evidence.

PubMed

Omar, Mohamed Shamun; Quinn, Margaret M; Buchholz, Bryan; Geiser, Ken

2013-04-01

Many newly constructed green buildings (GB) are certified using the United States Green Building Council (USGBC) Leadership in Energy and Environmental Design (LEED) rating system for new construction and major renovation which focuses on architectural and mechanical design to conserve energy, reduce environmental harm, and enhance indoor quality for occupants. This study evaluated the preventive maintenance (PM) worker occupational safety and health (OSH) risks related to the design of GB. PM job hazard analyses (JHA) were performed on the tasks required to operate and maintain five GB features selected from 13 LEED certified GB. A 22-item JHA and OSH risk scoring system were developed. Potentially serious OSH hazards included: green roofs made of slippery material without fall protection; energy recovery wheels and storm water harvesting systems in confined spaces; skylights without guard rails; and tight geothermal well mechanical rooms constraining safe preventive practices. GB can present PM OSH risks and these should be eliminated in the building design phase. Copyright © 2013 Wiley Periodicals, Inc.

[Painting in construction and exposure to carcinogenic chemical agents: an Italian study in Lombardy].

PubMed

Cirla, P E; Martinotti, I; Firmi, A M; Cirla, A M

2012-01-01

The risk associated with exposure to chemical carcinogens (as classified by International Agency for Research on Cancer and/or the European Union), during painting activities in construction seems controversial. This study included all 43 activities of professional painting in this sector existing in the area of Cremona, in Lombardy region. The aim was to consider and promote preventive technical and medical solutions, basing on efficacy. The occupational exposure and the already adopted preventive measures were evaluated by investigations at workplaces, supported by standardized questionnaires and registrations. 860 commercial products (402 chemical substances) were classified: in 38% of cases the ingredients were not listed in the Material Safety Data Sheets (retrieved by the manufacturer). The real possibility of a risk exposure to carcinogens has been reported in a small proportion of situations. In all companies the presence of carcinogens was unrecognized or at least had not been taken into account in the risk assessment of workers.

Perception of blood transfusion risk.

PubMed

Lee, David

2006-04-01

Perceptions of risk ultimately drive the responses of individuals and society to risk issues, and transfusion risk is no exception. Surveys of lay people over the past decade indicate that public concern about transfusion safety has remained prevalent, dominated by the ongoing fear of contracting HIV infection. Such perceptions persist despite the acknowledgment that blood transfusion is safer now than in years past. Judgements by the lay public that may, at first glance, seem irrational can often be understood when the heuristics, biases, and models of human judgements of risk are considered. Risk perception research suggests that how lay people perceive risk has less to do with the unidimensional view of risk as a probabilistic expression and more to do with a complex multidimensional construct in which affect, reason, worldviews, trust, and other factors are intertwined. This review summarizes some of the principles of risk perception as applicable to transfusion medicine.

75 FR 27641 - Safety Zone; Marathon Oil Refinery Construction, Rouge River, Detroit, MI

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-18

...-AA00 Safety Zone; Marathon Oil Refinery Construction, Rouge River, Detroit, MI AGENCY: Coast Guard, DHS... River during the Marathon Oil Refinery Construction project. This temporary safety zone is necessary to... personnel during the setup and offloading of equipment in conjunction with the Marathon Oil Refinery...

15 CFR 270.2 - Definitions used in this part.

Code of Federal Regulations, 2013 CFR

2013-01-01

... INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS General § 270.2 Definitions used in this part. The following definitions are applicable to this part: Act. The National Construction Safety Team Act (Pub. L. 107-231, 116 Stat. 1471...

15 CFR 270.2 - Definitions used in this part.

Code of Federal Regulations, 2011 CFR

2011-01-01

... INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS General § 270.2 Definitions used in this part. The following definitions are applicable to this part: Act. The National Construction Safety Team Act (Pub. L. 107-231, 116 Stat. 1471...

15 CFR 270.2 - Definitions used in this part.

Code of Federal Regulations, 2012 CFR

2012-01-01

... INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS General § 270.2 Definitions used in this part. The following definitions are applicable to this part: Act. The National Construction Safety Team Act (Pub. L. 107-231, 116 Stat. 1471...

15 CFR 270.2 - Definitions used in this part.

Code of Federal Regulations, 2014 CFR

2014-01-01

... INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS General § 270.2 Definitions used in this part. The following definitions are applicable to this part: Act. The National Construction Safety Team Act (Pub. L. 107-231, 116 Stat. 1471...

77 FR 74828 - National Construction Safety Team Advisory Committee Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-18

... Team Advisory Committee Meeting AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of open meeting. SUMMARY: The National Construction Safety Team (NCST) Advisory... Construction Safety Team Act (15 U.S.C. 7301 et seq.). The NCST Advisory Committee is comprised of ten members...

15 CFR 270.2 - Definitions used in this part.

Code of Federal Regulations, 2010 CFR

2010-01-01

... INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS General § 270.2 Definitions used in this part. The following definitions are applicable to this part: Act. The National Construction Safety Team Act (Pub. L. 107-231, 116 Stat. 1471...

Prevalence, source and severity of work-related injuries among "foreign" construction workers in a large Malaysian organisation: a cross-sectional study.

PubMed

Zerguine, Haroun; Tamrin, Shamsul Bahri Mohd; Jalaludin, Juliana

2018-06-01

Malaysian construction sector is regarded as critical in the field of health because of the high rates of accidents and fatalities. This research aimed to determine the prevalence, sources and severity of injuries and its association with commitment to safety among foreign construction workers. A cross-sectional study was conducted among 323 foreign construction workers from six construction projects of a large organization in Malaysia, using a simple random sampling method. Data was collected using a structured questionnaire to assess work-related injuries and safety commitment. The collected data was analysed by SPSS 22.0 using descriptive statistics and χ 2 test. The prevalence of work-related injuries in a one year period was 22.6%, where most of the injuries were of moderate severity (39.7%) and falls from heights represented the main source (31.5%). The majority of the foreign construction workers had perceived between moderate and high safety commitment, which was significantly associated with work-related injuries. The results also showed a significant association of work-related injuries with the company's interest in Safety and Health, Safety and Health training, and safety equipment. Thus, the implementation of new procedures and providing relevant trainings and safety equipment; will lead to a decrease in injury rates in construction sites.

Ethnic Disparities of Perceived Safety Climate Among Construction Workers in Georgia, 2015.

PubMed

Welton, Michael; DeJoy, David; Castellanos, Maria Eugenia; Ebell, Mark; Shen, Ye; Robb, Sara

2018-06-01

Safety climate involves worker perception about the relative importance where they work and safety climate and has been shown to be a reliable predictor of safety-related outcomes. The primary objective of this study is to investigate ethnic differences in perceived safety climate among construction workers. Surveys (n = 179) that included a 10-item safety climate scale were administered in Athens, Georgia (GA), at local construction sites and home improvement stores during June-August, 2015. The majority of respondents were carpenters or roofers (39%), followed by laborers (22%), painters and dry wall workers (14%), other skilled trades (14%), and supervisors (11%); 32% were Hispanic. Hispanic ethnicity (p < 0.0001), drinking two or more alcoholic beverages per day (p < 0.0001), working for a company that does not provide health insurance (p = 0.0022), and working for a company with fewer than ten employees (p < 0.0001) were significantly associated with lower perceived safety climate scores. The lower perceived safety climate scores among Hispanic workers indicate that the perception of the importance of safety on the job site is lower among Hispanics construction workers than non-Hispanics construction workers.

Risk analysis using AS/NZS 4360:2004, Bow-Tie diagram and ALARP on construction projects of Banyumanik Hospital

NASA Astrophysics Data System (ADS)

Sari, Diana Puspita; Pujotomo, Darminto; Wardani, Nadira Kusuma

2017-11-01

The Determination of risk is an uncertain event. Risks can have negative or positive impacts on project objectives. A project was defined as a series of activities and tasks that have a purpose, specifications, and limits of cost. Banyumanik Hospital Development Project is one of the construction projects in Semarang which have experienced some problems. The first problem is project delays on building stake. The second problem is delay of material supply. Finally, the problem that occurs is less management attention to health safety as evidenced by the unavailability of PPE for the workers. These problems will pose a risk to be a very important risk management performed by contractors at the Banyumanik Hospital Development Project to reduce the impact that would be caused by the risk borne by the provider of construction services. This research aim to risk identification, risk assessment and risk mitigation. Project risk management begins with the identification of risks based on the project life cycle. The risk assessment carried out by AS I NZS 4360: 2004 to the impacts of cost, time and quality. The results obtained from the method of AS I NZS 4360: 2004 is the risk that requires the handling of mitigation. Mitigated risk is the risk that had significant and high level. There are four risks that require risk mitigation with Bow-Tie diagrams which is work accidents, contract delays, material delays and design changes. Bow-Tie diagram method is a method for identifying causal and preventive action and recovery of a risk. Results obtained from Bow-Tie diagram method is a preventive action and recovery. This action is used as input to the ALARP method. ALARP method is used to determine the priority of the strategy proposed in the category broadly acceptable, tolerable, and unacceptable.

Safety leadership at construction sites: the importance of rule-oriented and participative leadership.

PubMed

Grill, Martin; Pousette, Anders; Nielsen, Kent; Grytnes, Regine; Törner, Marianne

2017-07-01

Objectives The construction industry accounted for >20% of all fatal occupational accidents in Europe in 2014. Leadership is an essential antecedent to occupational safety. The aim of the present study was to assess the influence of transformational, active transactional, rule-oriented, participative, and laissez-faire leadership on safety climate, safety behavior, and accidents in the Swedish and Danish construction industry. Sweden and Denmark are similar countries but have a large difference in occupational accidents rates. Methods A questionnaire study was conducted among a random sample of construction workers in both countries: 811 construction workers from 85 sites responded, resulting in site and individual response rates of 73% and 64%, respectively. Results The results indicated that transformational, active transactional, rule-oriented and participative leadership predict positive safety outcomes, and laissez-faire leadership predict negative safety outcomes. For example, rule-oriented leadership predicts a superior safety climate (β=0.40, P<0.001), enhanced safety behavior (β=0.15, P<0.001), and fewer accidents [odds ratio (OR) 0.78, 95% confidence interval (95% CI) 0.62-0.98]. The effect of rule-oriented leadership on workers' safety behavior was moderated by the level of participative leadership (β=0.10, P<0.001), suggesting that when rules and plans are established in a collaborative manner, workers' motivation to comply with safety regulations and participate in proactive safety activities is elevated. The influence of leadership behaviors on safety outcomes were largely similar in Sweden and Denmark. Rule-oriented and participative leadership were more common in the Swedish than Danish construction industry, which may partly explain the difference in occupational accident rates. Conclusions Applying less laissez-faire leadership and more transformational, active transactional, participative and rule-oriented leadership appears to be an effective way for construction site managers to improve occupational safety in the industry.

Organizational culture and a safety-conscious work environment: The mediating role of employee communication satisfaction.

PubMed

Silla, Inmaculada; Navajas, Joaquin; Koves, G Kenneth

2017-06-01

A safety-conscious work environment allows high-reliability organizations to be proactive regarding safety and enables employees to feel free to report any concern without fear of retaliation. Currently, research on the antecedents to safety-conscious work environments is scarce. Structural equation modeling was applied to test the mediating role of employee communication satisfaction in the relationship between constructive culture and a safety-conscious work environment in several nuclear power plants. Employee communication satisfaction partially mediated the positive relationships between a constructive culture and a safety-conscious work environment. Constructive cultures in which cooperation, supportive relationships, individual growth and high performance are encouraged facilitate the establishment of a safety-conscious work environment. This influence is partially explained by increased employee communication satisfaction. Constructive cultures should be encouraged within organizations. In addition, managers should promote communication policies and practices that support a safety-conscious work environment. Copyright © 2017 Elsevier Ltd and National Safety Council. All rights reserved.

Lean Production as an Innovative Approach to Construction

NASA Astrophysics Data System (ADS)

Spišáková, Marcela; Kozlovská, Mária

2013-06-01

Lean production presents a new approach to the construction management which has enabled enterprises to attain very high levels of efficiency, competitiveness and flexibility in production systems. Nowadays, a number of industrial processes are managed in accordance with these advanced management principles [1]. The principles of lean production are applied within the integrated design and delivery solutions (IDDS) and prefabricated construction. IDDS uses collaborative work processes and enhanced skills, with integrated data, information, and knowledge management to minimize structural and process inefficiencies and to enhance the value delivered during design, build, and operation, and across projects. Prefabrication presents a one of opportunities for construction methods, which allows the compliance with principles of sustainable design, provides the potential benefits such as faster construction, fewer housing defects, reduction in energy use and waste and elimination of environmental and safety risks. This paper presents the lean production within the IDDS and its potential in the modern prefabrication. There is created a field providing of benefits of lean production in construction industry.

The construction of power grid operation index system considering the risk of maintenance

NASA Astrophysics Data System (ADS)

Tang, Jihong; Wang, Canlin; Jiang, Xinfan; Ye, Jianhui; Pan, Feilai

2018-02-01

In recent years, large-scale blackout occurred at home and abroad caused widespread concern about the operation of the grid in the world, and the maintenance risk is an important indicator of grid safety. The barrier operation of the circuit breaker exists in the process of overhaul of the power grid. The operation of the different barrier is of great significance to the change of the power flow, thus affecting the safe operation of the system. Most of the grid operating status evaluation index system did not consider the risk of maintenance, to this end, this paper from the security, economy, quality and cleanliness of the four angles, build the power grid operation index system considering the risk of maintenance.

Accidents in Coal Mining from Perspective of Risk Theory

NASA Astrophysics Data System (ADS)

Khamidullina, E. A.; Timofeeva, S. S.; Smirnov, G. I.

2017-11-01

Introduction. The indicators of the safety system quality in the technosphere include risk indicators. The purpose of this work is to assess the social risk of coal mining since coal mining is associated with specific working conditions, and any emergency situation immediately jeopardizes thelives of many people at the same time. Methods. The work is based on the analysis of statistical information. Results and discussion. The F/N curve of coal mining for the 70-year period (1943-2012) was constructed, and the normative values of the social risk of Russia and other industrialized countries were discussed. Judging by the F/N diagram, only the frequency of accidents with a large number of deaths can correspond to the normative level indicating an exceptionally high level of coal mining risk.

A conceptual framework to development of construction safety culture in Indonesia

NASA Astrophysics Data System (ADS)

Armyn Machfudiyanto, Rossy; Latief, Yusuf

2017-12-01

Working accidents in the construction industry are among the highest in the world, affecting the three levels of both macro (National) mezzo (Enterprise) and micro (Projects) that need to be integrated in building a safety culture. The purpose of this research is to develop a conceptual framework in improving safety culture in the construction industry in Indonesia. The methodology was developed using literature study and deductive analysis which then performed expert validation to ensure the concept developed. The result of this research is that policy and institution as input to build safety culture which need to be followed up with increasing of company maturity which have implication to safety performance and construction project performance.

77 FR 20719 - Safety Zone; Matlacha Bridge Construction, Matlacha Pass, Matlacha, FL

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-06

...-AA00 Safety Zone; Matlacha Bridge Construction, Matlacha Pass, Matlacha, FL AGENCY: Coast Guard, DHS... waters of Matlacha Pass in the vicinity of the Matlacha Bridge in Matlacha, Florida. The safety zone will be enforced during construction of the Matlacha Bridge from Monday, March 12, 2012 through Tuesday...

77 FR 1870 - Safety Zone; Matlacha Bridge Construction, Matlacha Pass, Matlacha, FL

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-12

...-AA00 Safety Zone; Matlacha Bridge Construction, Matlacha Pass, Matlacha, FL AGENCY: Coast Guard, DHS... waters of Matlacha Pass in the vicinity of the Matlacha Bridge in Matlacha, Florida. The safety zone will be enforced during construction of the Matlacha Bridge from Thursday, December 15, 2011 until Sunday...

Characterizing the low wage immigrant workforce: a comparative analysis of the health disparities among selected occupations in Somerville, Massachusetts.

PubMed

Panikkar, Bindu; Woodin, Mark A; Brugge, Doug; Hyatt, Raymond; Gute, David M

2014-05-01

This study estimates job-related risks among common low wage occupations (cleaning, construction, food service, cashier/baggers, and factory workers) held by predominantly Haitian, El Salvadorian, and Brazilian immigrants living or working in Somerville, Massachusetts. A community-based cross-sectional survey on immigrant occupational health was conducted between 2006 and 2009 and logistic regression was used to assess the job-related risks among the most common low wage occupations. Construction workers reported significantly higher health risks, and lower access to occupational health services than the other occupations. Compared to cashier/baggers, the reference population in this study, cleaners reported significantly lower access to health and safety and work training and no knowledge of workers' compensation. Factory workers reported significantly lower work training compared to cashier/baggers. Food service workers reported the least access to doctors compared to the other occupations. We found significant variability in risks among different low wage immigrant occupations. The type of occupation independently contributed to varying levels of risks among these jobs. We believe our findings to be conservative and recommend additional inquiry aimed at assuring the representativeness of our findings. © 2013 Wiley Periodicals, Inc.

Biomechanical modelling and evaluation of construction jobs for performance improvement.

PubMed

Parida, Ratri; Ray, Pradip Kumar

2012-01-01

Occupational risk factors, such as awkward posture, repetition, lack of rest, insufficient illumination and heavy workload related to construction-related MMH activities may cause musculoskeletal disorders and poor performance of the workers, ergonomic design of construction worksystems was a critical need for improving their health and safety wherein a dynamic biomechanical models were required to be empirically developed and tested at a construction site of Tata Steel, the largest steel making company of India in private sector. In this study, a comprehensive framework is proposed for biomechanical evaluation of shovelling and grinding under diverse work environments. The benefit of such an analysis lies in its usefulness in setting guidelines for designing such jobs with minimization of risks of musculoskeletal disorders (MSDs) and enhancing correct methods of carrying out the jobs leading to reduced fatigue and physical stress. Data based on direct observations and videography were collected for the shovellers and grinders over a number of workcycles. Compressive forces and moments for a number of segments and joints are computed with respect to joint flexion and extension. The results indicate that moments and compressive forces at L5/S1 link are significant for shovellers while moments at elbow and wrist are significant for grinders.

Systematic impact of institutional pressures on safety climate in the construction industry.

PubMed

He, Qinghua; Dong, Shuang; Rose, Timothy; Li, Heng; Yin, Qin; Cao, Dongping

2016-08-01

This paper explores how three types of institutional pressure (i.e., coercive, mimetic and normative pressures) systematically impact on the safety climate of construction projects. These impacts are empirically tested by survey data collected from 186 questionnaires of construction companies operating in Shanghai, China. The results, obtained by partial least squares analysis, show that organizational management commitment to safety and employee involvement is positively related to all three institutional pressures, while the perception of responsibility for safety and health is significantly influenced by coercive and mimetic pressure. However, coercive and normative pressures have no significant effect on the applicability of safety rules and work practices, revealing the importance of external organizational pressures in improving project safety climate from a systematic view. The findings also provide insights into the use of institutional forces to facilitate the improvement of safety climate in the construction industry. Copyright © 2015 Elsevier Ltd. All rights reserved.

Safety concerns related to modular/prefabricated building construction.

PubMed

Fard, Maryam Mirhadi; Terouhid, Seyyed Amin; Kibert, Charles J; Hakim, Hamed

2017-03-01

The US construction industry annually experiences a relatively high rate of fatalities and injuries; therefore, improving safety practices should be considered a top priority for this industry. Modular/prefabricated building construction is a construction strategy that involves manufacturing of the whole building or some of its components off-site. This research focuses on the safety performance of the modular/prefabricated building construction sector during both manufacturing and on-site processes. This safety evaluation can serve as the starting point for improving the safety performance of this sector. Research was conducted based on Occupational Safety and Health Administration investigated accidents. The study found 125 accidents related to modular/prefabricated building construction. The details of each accident were closely examined to identify the types of injury and underlying causes. Out of 125 accidents, there were 48 fatalities (38.4%), 63 hospitalized injuries (50.4%), and 14 non-hospitalized injuries (11.2%). It was found that, the most common type of injury in modular/prefabricated construction was 'fracture', and the most common cause of accidents was 'fall'. The most frequent cause of cause (underlying and root cause) was 'unstable structure'. In this research, the accidents were also examined in terms of corresponding location, occupation, equipment as well as activities during which the accidents occurred. For improving safety records of the modular/prefabricated construction sector, this study recommends that future research be conducted on stabilizing structures during their lifting, storing, and permanent installation, securing fall protection systems during on-site assembly of components while working from heights, and developing training programmes and standards focused on modular/prefabricated construction.

Regulatory Risk Reduction for Advanced Reactor Technologies – FY2016 Status and Work Plan Summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moe, Wayne Leland

2016-08-01

Millions of public and private sector dollars have been invested over recent decades to realize greater efficiency, reliability, and the inherent and passive safety offered by advanced nuclear reactor technologies. However, a major challenge in experiencing those benefits resides in the existing U.S. regulatory framework. This framework governs all commercial nuclear plant construction, operations, and safety issues and is highly large light water reactor (LWR) technology centric. The framework must be modernized to effectively deal with non-LWR advanced designs if those designs are to become part of the U.S energy supply. The U.S. Department of Energy’s (DOE) Advanced Reactor Technologiesmore » (ART) Regulatory Risk Reduction (RRR) initiative, managed by the Regulatory Affairs Department at the Idaho National Laboratory (INL), is establishing a capability that can systematically retire extraneous licensing risks associated with regulatory framework incompatibilities. This capability proposes to rely heavily on the perspectives of the affected regulated community (i.e., commercial advanced reactor designers/vendors and prospective owner/operators) yet remain tuned to assuring public safety and acceptability by regulators responsible for license issuance. The extent to which broad industry perspectives are being incorporated into the proposed framework makes this initiative unique and of potential benefit to all future domestic non-LWR applicants« less

Applying a health behavior theory to explore the influence of information and experience on arsenic risk representations, policy beliefs, and protective behavior.

PubMed

Severtson, Dolores J; Baumann, Linda C; Brown, Roger L

2006-04-01

The common sense model (CSM) shows how people process information to construct representations, or mental models, that guide responses to health threats. We applied the CSM to understand how people responded to information about arsenic-contaminated well water. Constructs included external information (arsenic level and information use), experience (perceived water quality and arsenic-related health effects), representations, safety judgments, opinions about policies to mitigate environmental arsenic, and protective behavior. Of 649 surveys mailed to private well users with arsenic levels exceeding the maximum contaminant level, 545 (84%) were analyzed. Structural equation modeling quantified CSM relationships. Both external information and experience had substantial effects on behavior. Participants who identified a water problem were more likely to reduce exposure to arsenic. However, about 60% perceived good water quality and 60% safe water. Participants with higher arsenic levels selected higher personal safety thresholds and 20% reported a lower arsenic level than indicated by their well test. These beliefs would support judgments of safe water. A variety of psychological and contextual factors may explain judgments of safe water when information suggested otherwise. Information use had an indirect effect on policy beliefs through understanding environmental causes of arsenic. People need concrete information about environmental risk at both personal and environmental-systems levels to promote a comprehensive understanding and response. The CSM explained responses to arsenic information and may have application to other environmental risks.

Proceedings of the Annual Meeting of the Association for Education in Journalism and Mass Communication (83rd, Phoenix, Arizona, August 9-12, 2000). Science Communication Interest Group.

ERIC Educational Resources Information Center

Association for Education in Journalism and Mass Communication.

The Science Communication Interest Group section of the proceedings contains the following five papers: "Accounting for the Complexity of Causal Explanations in the Wake of an Environmental Risk" (LeeAnn Kahlor, Sharon Dunwoody and Robert J. Griffin); "Construction of Technology Crisis and Safety: News Media's Framing the Y2K…

Wireless remote monitoring of toxic gases in shipbuilding.

PubMed

Pérez-Garrido, Carlos; González-Castaño, Francisco J; Chaves-Díeguez, David; Rodríguez-Hernández, Pedro S

2014-02-14

Large-scale wireless sensor networks have not achieved market impact, so far. Nevertheless, this technology may be applied successfully to small-scale niche markets. Shipyards are hazardous working environments with many potential risks to worker safety. Toxic gases generated in soldering processes in enclosed spaces (e.g., cargo holds) are one such risk. The dynamic environment of a ship under construction makes it very difficult to plan gas detection fixed infrastructures connected to external monitoring stations via wired links. While portable devices with gas level indicators exist, they require workers to monitor measurements, often in situations where they are focused on other tasks for relatively long periods. In this work, we present a wireless multihop remote gas monitoring system for shipyard environments that has been tested in a real ship under construction. Using this system, we validate IEEE 802.15.4/Zigbee wireless networks as a suitable technology to connect gas detectors to control stations outside the ships. These networks have the added benefit that they reconfigure themselves dynamically in case of network failure or redeployment, for example when a relay is moved to a new location. Performance measurements include round trip time (which determines the alert response time for safety teams) and link quality indicator and packet error rate (which determine communication robustness).

Wireless Remote Monitoring of Toxic Gases in Shipbuilding

PubMed Central

Pérez-Garrido, Carlos; González-Castaño, Francisco J.; Chaves-Diéguez, David; Rodríguez-Hernández, Pedro S.

2014-01-01

Large-scale wireless sensor networks have not achieved market impact, so far. Nevertheless, this technology may be applied successfully to small-scale niche markets. Shipyards are hazardous working environments with many potential risks to worker safety. Toxic gases generated in soldering processes in enclosed spaces (e.g., cargo holds) are one such risk. The dynamic environment of a ship under construction makes it very difficult to plan gas detection fixed infrastructures connected to external monitoring stations via wired links. While portable devices with gas level indicators exist, they require workers to monitor measurements, often in situations where they are focused on other tasks for relatively long periods. In this work, we present a wireless multihop remote gas monitoring system for shipyard environments that has been tested in a real ship under construction. Using this system, we validate IEEE 802.15.4/Zigbee wireless networks as a suitable technology to connect gas detectors to control stations outside the ships. These networks have the added benefit that they reconfigure themselves dynamically in case of network failure or redeployment, for example when a relay is moved to a new location. Performance measurements include round trip time (which determines the alert response time for safety teams) and link quality indicator and packet error rate (which determine communication robustness). PMID:24534919

Revisiting Pneumatic Nail Gun Trigger Recommendations.

PubMed

Albers, James; Lowe, Brian; Lipscomb, Hester; Hudock, Stephen; Dement, John; Evanoff, Bradley; Fullen, Mark; Gillen, Matt; Kaskutas, Vicki; Nolan, James; Patterson, Dennis; Platner, James; Pompeii, Lisa; Schoenfisch, Ashley

2015-03-01

Use of a pneumatic nail gun with a sequential actuation trigger (SAT) significantly diminishes the risk for acute traumatic injury compared to use of a contact actuation trigger (CAT) nail gun. A theoretically-based increased risk of work-related musculoskeletal disorders from use of a SAT nail gun, relative to CAT, appears unlikely and remains unproven. Based on current knowledge, the use of CAT nail guns cannot be justified as a safe alternative to SAT nail guns. This letter provides a perspective of ergonomists and occupational safety researchers recommending the use of the sequential actuation trigger for all nail gun tasks in the construction industry.

78 FR 44162 - Advisory Committee on Construction Safety and Health (ACCSH)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-23

... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2013-0006] Advisory Committee on Construction Safety and Health (ACCSH) AGENCY: Occupational Safety and Health... speak at the ACCSH meeting, and speaker presentations using one of the following methods: Electronically...

Multilevel Safety Climate and Safety Performance in the Construction Industry: Development and Validation of a Top-Down Mechanism

PubMed Central

Gao, Ran; Chan, Albert P.C.; Utama, Wahyudi P.; Zahoor, Hafiz

2016-01-01

The character of construction projects exposes front-line workers to dangers and accidents. Safety climate has been confirmed to be a predictor of safety performance in the construction industry. This study aims to explore the underlying mechanisms of the relationship between multilevel safety climate and safety performance. An integrated model was developed to study how particular safety climate factors of one level affect those of other levels, and then affect safety performance from the top down. A questionnaire survey was administered on six construction sites in Vietnam. A total of 1030 valid questionnaires were collected from this survey. Approximately half of the data were used to conduct exploratory factor analysis (EFA) and the remaining data were submitted to structural equation modeling (SEM). Top management commitment (TMC) and supervisors’ expectation (SE) were identified as factors to represent organizational safety climate (OSC) and supervisor safety climate (SSC), respectively, and coworkers’ caring and communication (CCC) and coworkers’ role models (CRM) were identified as factors to denote coworker safety climate (CSC). SEM results show that OSC factor is positively related to SSC factor and CSC factors significantly. SSC factor could partially mediate the relationship between OSC factor and CSC factors, as well as the relationship between OSC factor and safety performance. CSC factors partially mediate the relationship between OSC factor and safety performance, and the relationship between SSC factor and safety performance. The findings imply that a positive safety culture should be established both at the organizational level and the group level. Efforts from all top management, supervisors, and coworkers should be provided to improve safety performance in the construction industry. PMID:27834823

Multilevel Safety Climate and Safety Performance in the Construction Industry: Development and Validation of a Top-Down Mechanism.

PubMed

Gao, Ran; Chan, Albert P C; Utama, Wahyudi P; Zahoor, Hafiz

2016-11-08

The character of construction projects exposes front-line workers to dangers and accidents. Safety climate has been confirmed to be a predictor of safety performance in the construction industry. This study aims to explore the underlying mechanisms of the relationship between multilevel safety climate and safety performance. An integrated model was developed to study how particular safety climate factors of one level affect those of other levels, and then affect safety performance from the top down. A questionnaire survey was administered on six construction sites in Vietnam. A total of 1030 valid questionnaires were collected from this survey. Approximately half of the data were used to conduct exploratory factor analysis (EFA) and the remaining data were submitted to structural equation modeling (SEM). Top management commitment (TMC) and supervisors' expectation (SE) were identified as factors to represent organizational safety climate (OSC) and supervisor safety climate (SSC), respectively, and coworkers' caring and communication (CCC) and coworkers' role models (CRM) were identified as factors to denote coworker safety climate (CSC). SEM results show that OSC factor is positively related to SSC factor and CSC factors significantly. SSC factor could partially mediate the relationship between OSC factor and CSC factors, as well as the relationship between OSC factor and safety performance. CSC factors partially mediate the relationship between OSC factor and safety performance, and the relationship between SSC factor and safety performance. The findings imply that a positive safety culture should be established both at the organizational level and the group level. Efforts from all top management, supervisors, and coworkers should be provided to improve safety performance in the construction industry.

49 CFR 193.2303 - Construction acceptance.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 3 2013-10-01 2013-10-01 false Construction acceptance. 193.2303 Section 193.2303 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY...: FEDERAL SAFETY STANDARDS Construction § 193.2303 Construction acceptance. No person may place in service...

49 CFR 193.2303 - Construction acceptance.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false Construction acceptance. 193.2303 Section 193.2303 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY...: FEDERAL SAFETY STANDARDS Construction § 193.2303 Construction acceptance. No person may place in service...

Assessment and Management of the Risks of Debris Hits During Space Station EVAs

NASA Technical Reports Server (NTRS)

Pate-Cornell, Elisabeth; Sachon, Marc

1997-01-01

The risk of EVAs is critical to the decision of whether or not to automate a large part of the construction of the International Space Station (ISS). Furthermore, the choice of the technologies of the space suit and the life support system will determine (1) the immediate safety of these operations, and (2) the long-run costs and risks of human presence in space, not only in lower orbit (as is the case of the ISS) but also perhaps, outside these orbits, or on the surface of other planets. The problem is therefore both an immediate one and a long-term one. The fundamental question is how and when to shift from the existing EMU system (suit, helmet, gloves and life support system) to another type (e.g. a hard suit), given the potential trade-offs among life-cycle costs, risks to the astronauts, performance of tasks, and uncertainties about new systems' safety inherent to such a shift in technology. A more immediate issue is how to manage the risks of EVAs during the construction and operation of the ISS in order to make the astronauts (in the words of the NASA Administrator) "as safe outside as inside". For the moment (June 1997), the plan is to construct the Space Station using the low-pressure space suits that have been developed for the space shuttle. In the following, we will refer to this suit assembly as EMU (External Maneuvering Unit). It is the product of a long evolution, starting from the U.S. Air Force pilot suits through the various versions and changes that occurred for the purpose of NASA space exploration, in particular during the Gemini and the Apollo programs. The Shuttle EMU is composed of both soft fabrics and hard plates. As an alternative to the shuttle suit, at least two hard suits were developed by NASA: the AX5 and the MRKIII. The problem of producing hard suits for space exploration is very similar to that of producing deep-sea diving suits. There was thus an opportunity to develop a suit that could be manufactured for both purposes with the economies of scale that could be gained from a two-branch manufacturing line (space and deep sea). Of course, the space suit would need to be space qualified. Some of the problems in adopting one of the hard suits were first that the testing had to be completed, and second that it required additional storage space. The decision was made not to develop a hard suit in time for the construction and operation of the ISS. Instead, to improve the safety of the current suit, it was decided to reinforce the soft parts of the shuttle EMU with KEVLAR linings to strengthen it against debris impacts. Test results, however, show that this advanced suit design has little effect on the penetration characteristics.

33 CFR 165.T09-0333 - Safety zone; Marathon Oil Refinery construction, Rouge River, Detroit, MI.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Safety zone; Marathon Oil Refinery construction, Rouge River, Detroit, MI. 165.T09-0333 Section 165.T09-0333 Navigation and Navigable... Coast Guard District § 165.T09-0333 Safety zone; Marathon Oil Refinery construction, Rouge River...

Planning for Safety on the Jobsite. Safety in Industry, Construction Industry Series.

ERIC Educational Resources Information Center

Occupational Safety and Health Administration, Washington, DC.

Work injuries and their monetary losses in the construction industry can be effectively prevented only through an aggressive and well-planned safety effort. The purpose of this bulletin is to provide guidelines to aid the construction contractor in complying with legal requirements and in attaining the objective of keeping costly accidents and…

PLANNING FOR SAFETY ON THE JOBSITE. SAFETY IN INDUSTRY--CONSTRUCTION INDUSTRY SERIES.

ERIC Educational Resources Information Center

OTTO, FRANCIS L.; VAN ATTA, F.A.

WORK INJURIES AND THEIR MONETARY LOSSES IN THE CONSTRUCTION INDUSTRY CAN BE EFFECTIVELY PREVENTED ONLY THROUGH AN AGGRESSIVE AND WELL-PLANNED SAFETY EFFORT. THIS BULLETIN DISCUSSES THE "HOW" OF PLANNING FOR SAFETY ON THE JOBSITE. IT WAS PREPARED IN THE DIVISION OF PROGRAMING AND RESEARCH, OFFICE OF OCCUPATIONAL SAFETY. CONTENTS INCLUDE (1) THE…

National evaluation of strategies to reduce safety violations for working from heights in construction companies: results from a randomized controlled trial.

PubMed

van der Molen, Henk F; den Herder, Aalt; Warning, Jan; Frings-Dresen, Monique H W

2016-01-09

The objective of this study is to evaluate the effectiveness of a face-to-face strategy and a direct mail strategy on safety violations while working from heights among construction companies compared to a control condition. Construction companies with workers at risk for fall injuries were eligible for this three-armed randomized controlled trial. In total, 27 cities were randomly assigned to intervention groups-where eligible companies were given either a face-to-face guidance strategy or a direct mailing strategy with access to internet facilities-or to a control group. The primary outcomes were the number and type of safety violations recorded by labor inspectors after three months. A process evaluation for both strategies was performed to determine reach, program implementation, satisfaction, knowledge and perceived safety behavior. A cost analysis was performed to establish the financial costs for each intervention strategy. Analyses were done by intention to treat. In total, 41% (n = 88) of the companies eligible for the face-to-face intervention participated and 73% (n = 69) for direct mail. Intervention materials were delivered to 69 % (face-to-face group) and 100 % (direct mail group); completion of intervention activities within companies was low. Satisfaction, increase in knowledge, and safety behavior did not differ between the intervention groups. Costs for personal advice were 28% higher than for direct mail. Ultimately, nine intervention companies were captured in the 288 worksite measurements performed by the labor inspectorate. No statistical differences in mean number of safety violations (1.8-2.4) or penalties (72%-100%) were found between the intervention and control groups based on all worksite inspections. No conclusions about the effect of face-to-face and direct mail strategies on safety violations could be drawn due to the limited number of intervention companies captured in the primary outcome measurements. The costs for a face-to-face strategy are higher compared with a direct mail strategy. No difference in awareness and attitude for safe working was found between employers and workers between both strategies. NTR 4298 on 29-Nov-2013.

A stochastic multicriteria model for evidence-based decision making in drug benefit-risk analysis.

PubMed

Tervonen, Tommi; van Valkenhoef, Gert; Buskens, Erik; Hillege, Hans L; Postmus, Douwe

2011-05-30

Drug benefit-risk (BR) analysis is based on firm clinical evidence regarding various safety and efficacy outcomes. In this paper, we propose a new and more formal approach for constructing a supporting multi-criteria model that fully takes into account the evidence on efficacy and adverse drug reactions. Our approach is based on the stochastic multi-criteria acceptability analysis methodology, which allows us to compute the typical value judgments that support a decision, to quantify decision uncertainty, and to compute a comprehensive BR profile. We construct a multi-criteria model for the therapeutic group of second-generation antidepressants. We assess fluoxetine and venlafaxine together with placebo according to incidence of treatment response and three common adverse drug reactions by using data from a published study. Our model shows that there are clear trade-offs among the treatment alternatives. Copyright © 2011 John Wiley & Sons, Ltd.

33 CFR 159.97 - Safety: inspected vessels.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Safety: inspected vessels. 159.97...) POLLUTION MARINE SANITATION DEVICES Design, Construction, and Testing § 159.97 Safety: inspected vessels. The Commanding Officer, USCG Marine Safety Center, approves the design and construction of devices to...

33 CFR 159.97 - Safety: inspected vessels.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Safety: inspected vessels. 159.97...) POLLUTION MARINE SANITATION DEVICES Design, Construction, and Testing § 159.97 Safety: inspected vessels. The Commanding Officer, USCG Marine Safety Center, approves the design and construction of devices to...

33 CFR 159.97 - Safety: inspected vessels.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Safety: inspected vessels. 159.97...) POLLUTION MARINE SANITATION DEVICES Design, Construction, and Testing § 159.97 Safety: inspected vessels. The Commanding Officer, USCG Marine Safety Center, approves the design and construction of devices to...

33 CFR 159.97 - Safety: inspected vessels.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Safety: inspected vessels. 159.97...) POLLUTION MARINE SANITATION DEVICES Design, Construction, and Testing § 159.97 Safety: inspected vessels. The Commanding Officer, USCG Marine Safety Center, approves the design and construction of devices to...

How do the work environment and work safety differ between the dry and wet kitchen foodservice facilities?

PubMed Central

Kim, Jeong-Won; Ju, Se-Young; Go, Eun-Sun

2012-01-01

In order to create a worker-friendly environment for institutional foodservice, facilities operating with a dry kitchen system have been recommended. This study was designed to compare the work safety and work environment of foodservice between wet and dry kitchen systems. Data were obtained using questionnaires with a target group of 303 staff at 57 foodservice operations. Dry kitchen facilities were constructed after 2006, which had a higher construction cost and more finishing floors with anti-slip tiles, and in which employees more wore non-slip footwear than wet kitchen (76.7%). The kitchen temperature and muscular pain were the most frequently reported employees' discomfort factors in the two systems, and, in the wet kitchen, "noise of kitchen" was also frequently reported as a discomfort. Dietitian and employees rated the less slippery and slip related incidents in dry kitchens than those of wet kitchen. Fryer area, ware-washing area, and plate waste table were the slippery areas and the causes were different between the functional areas. The risk for current leakage was rated significantly higher in wet kitchens by dietitians. In addition, the ware-washing area was found to be where employees felt the highest risk of electrical shock. Muscular pain (72.2%), arthritis (39.1%), hard-of-hearing (46.6%) and psychological stress (47.0%) were experienced by employees more than once a month, particularly in the wet kitchen. In conclusion, the dry kitchen system was found to be more efficient for food and work safety because of its superior design and well managed practices. PMID:22977692

How do the work environment and work safety differ between the dry and wet kitchen foodservice facilities?

PubMed

Chang, Hye-Ja; Kim, Jeong-Won; Ju, Se-Young; Go, Eun-Sun

2012-08-01

In order to create a worker-friendly environment for institutional foodservice, facilities operating with a dry kitchen system have been recommended. This study was designed to compare the work safety and work environment of foodservice between wet and dry kitchen systems. Data were obtained using questionnaires with a target group of 303 staff at 57 foodservice operations. Dry kitchen facilities were constructed after 2006, which had a higher construction cost and more finishing floors with anti-slip tiles, and in which employees more wore non-slip footwear than wet kitchen (76.7%). The kitchen temperature and muscular pain were the most frequently reported employees' discomfort factors in the two systems, and, in the wet kitchen, "noise of kitchen" was also frequently reported as a discomfort. Dietitian and employees rated the less slippery and slip related incidents in dry kitchens than those of wet kitchen. Fryer area, ware-washing area, and plate waste table were the slippery areas and the causes were different between the functional areas. The risk for current leakage was rated significantly higher in wet kitchens by dietitians. In addition, the ware-washing area was found to be where employees felt the highest risk of electrical shock. Muscular pain (72.2%), arthritis (39.1%), hard-of-hearing (46.6%) and psychological stress (47.0%) were experienced by employees more than once a month, particularly in the wet kitchen. In conclusion, the dry kitchen system was found to be more efficient for food and work safety because of its superior design and well managed practices.

Assessment of safety culture among job positions in high-rise construction: a hybrid fuzzy multi criteria decision-making (FMCDM) approach.

PubMed

Ardeshir, A; Mohajeri, M

2018-06-01

The construction industry is known as one of the most dangerous industries, which not only requires sound operation of executive laws and regulations, but also necessitates the safety culture of all workers at workshops. Therefore, the aim of this research is to identify the factors of safety culture and ranking occupations in jobsites based on those factors in order to proactively improve the safety culture of construction projects and subsequently promote safety conditions and worksites. In this study, safety culture criteria are weighted by a combination of Fuzzy Decision Trail and Evaluation Laboratory and Fuzzy ANP methods. Next, different job positions in high-rise projects are ranked using the Fuzzy Technique for Order of Preference by Similarity to Ideal Solution method. Findings demonstrated that the project manager, site superintendent and supervisor occupations had the highest and labourers had the lowest level of safety culture in the high-rise construction industry. Furthermore, factors such as safety supervision and training must be considered more seriously in order to create a positive safety culture among workers.

Fatal injuries to teenage construction workers in the US.

PubMed

Suruda, Anthony; Philips, Peter; Lillquist, Dean; Sesek, Richard

2003-11-01

The construction industry is second only to agriculture in the annual number of fatal injuries in workers less than 18 years of age. We examined fatal injury reports for youth and adult workers to determine risk factors for injury and applicability of existing child labor regulations. The US Occupational Safety & Health Administration (OSHA) investigation data for fatal work injuries from 1984 through 1998 were reviewed with respect to type of event, employer characteristics, and apparent violations of existing child labor laws under the Fair Labor Standards Act (FLSA). We also examined whether the employer met exemption criteria for federal enforcement of child labor or OSHA regulations. The fatality rate for teenage construction workers age 19 and younger was 12.1 per 100,000 per year, slightly less than for adult workers. Teenage workers who were fatally injured were more likely than adults to have been employed at non-union construction firms (odds ratio (OR) = 4.96, P < 0.05), firms with fewer than 11 employees (OR = 1.72, P < 0.05), and their employers were more likely to have been cited by OSHA for safety violations (OR = 1.66, P < 0.05) than for firms which were investigated because of a fatality in an adult worker. Fatalities in teenagers were more likely to occur in special construction trades such as roofing. Among fatalities in workers less than 18 years of age, approximately one-half (49%) of the 76 fatal injuries were in apparent violation of existing child labor regulations. We estimated that in 41 of the 76 cases (54%) the employer's gross annual income exceeded the $500,000 threshold for federal enforcement of child labor laws. Only 28 of 76 cases (37%) were at construction firms with 11 or more employees, which are subject to routine OSHA inspections. Fatal injuries in teenage construction workers differed from those in adults in that they were more likely to be at small, non-union firms of which a substantial proportion were exempt from federal enforcement of child labor laws and from routine OSHA inspections. Safety programs for young construction workers should include small, non-union construction firms and those in special construction trades such as roofing. We did not identify specific areas for new regulation but the number of fatalities reviewed was small. Copyright 2003 Wiley-Liss, Inc.

Safety climate and safety behaviors in the construction industry: The importance of co-workers commitment to safety.

PubMed

Schwatka, Natalie V; Rosecrance, John C

2016-06-16

There is growing empirical evidence that as safety climate improves work site safety practice improve. Safety climate is often measured by asking workers about their perceptions of management commitment to safety. However, it is less common to include perceptions of their co-workers commitment to safety. While the involvement of management in safety is essential, working with co-workers who value and prioritize safety may be just as important. To evaluate a concept of safety climate that focuses on top management, supervisors and co-workers commitment to safety, which is relatively new and untested in the United States construction industry. Survey data was collected from a cohort of 300 unionized construction workers in the United States. The significance of direct and indirect (mediation) effects among safety climate and safety behavior factors were evaluated via structural equation modeling. Results indicated that safety climate was associated with safety behaviors on the job. More specifically, perceptions of co-workers commitment to safety was a mediator between both management commitment to safety climate factors and safety behaviors. These results support workplace health and safety interventions that build and sustain safety climate and a commitment to safety amongst work teams.

Construction equipment and motor vehicle related injuries on construction sites in Turkey.

PubMed

Gürcanli, G Emre; Müngen, Ugur; Akad, Murat

2008-08-01

Research on occupational accidents on construction sites in Turkey is very few. Moreover, research on motor vehicle and equipment accidents also do not exist. Investigation in the scope of this study shows that after falls and contact with electricity, accidents involving heavy equipment and motor vehicles rank third and fourth, respectively. This study aims to reveal the characteristics of these types of accidents, deduct the prominent causes that lead to fatalities as well as permanent disabilities using the present data. With the aid of obtained results, recommendations are made for safety experts on how to derive data from insufficient sources in Turkey and to evaluate these data for prevention and mitigation of the risks that construction workers are exposed to. 168 fatal and 38 non-fatal traffic accident-caused incidents as well as 206 fatal and 97 non-fatal construction equipment accidents, which were selected from official statistics and expert reports, were taken into consideration. Analysis and classification of these accidents were done according to the way they happened, the type of construction site and the occupation of the victims. Moreover, the leading causes of fatal and non-fatal injuries, to which drivers, operators and co-operators are exposed, are presented. Critical findings concerning prominent ways of occurrence, type of construction work and occupation are presented; and a number of measures for reducing the present risks are suggested. Some approaches for analysing relevant data are proposed for further research.

Risk Engagement and Protection Survey (REPS): developing and validating a survey tool on fathers' attitudes towards child injury protection and risk engagement.

PubMed

Olsen, Lise L; Ishikawa, Takuro; Mâsse, Louise C; Chan, Grace; Brussoni, Mariana

2018-04-01

Fathers play a unique role in keeping children safe from injury yet understanding of their views and attitudes towards protecting children from injury and allowing them to engage in risks is limited. The purpose of this study was to develop and validate an instrument to measure fathers' attitudes towards these two constructs. An instrument was developed that used prior qualitative research to inform item generation. The questions were assessed for content validity with experts, then pilot-tested with fathers. The survey was completed by 302 fathers attending hospital with their child for an injury or non-injury reason. Results of confirmatory factor analysis identified eight items relating to the protection from injury factor and six items relating to the risk engagement factor. Correlation between the two factors was low, suggesting these are two independent constructs. The Risk Engagement and Protection Survey offers a tool for measuring attitudes and assisting with intervention strategy development in ways that reflect fathers' views and promotes a balanced view of children's needs for safety with their needs for engaging in active, healthy risk-taking. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

The communicative construction of safety in wildland firefighting

Treesearch

Jody Jahn; Linda L. Putnam; Anne E. Black

2012-01-01

This document is a summary of a mixed methods dissertation that examined the communicative construction of safety in wildland firefighting. For the dissertation, I used a two-study mixed methods approach, examining the communicative accomplishment of safety from two perspectives: high reliability organizing (Weick, Sutcliffe, & Obstfeld, 1999), and safety climate (...

Implementing AORN recommended practices for MIS: Part II.

PubMed

Morton, Paula J

2012-10-01

This article focuses on the equipment and workplace safety aspects of the revised AORN "Recommended practices for minimally invasive surgery." A multidisciplinary team that includes the perioperative nurse should be established to discuss aspects of the development and design of new construction or renovation (eg, room access, ergonomics, low-lighting, OR integration, hybrid OR considerations, design development). Equipment safety considerations during minimally invasive surgical procedures include using active electrode monitoring; verifying the properties of distention media; using smoke evacuation systems; reducing equipment, electrical, thermal, and fire hazards; performing routine safety checks on insufflation accessories; and minimizing the risk of ergonomic injuries to staff members. Additional considerations include using video recording devices, nonmagnetic equipment during magnetic resonance imaging, and fluid containment methods for fluid management. Copyright © 2012 AORN, Inc. Published by Elsevier Inc. All rights reserved.

77 FR 56671 - Notice of Proposed Information Collection: Comment Request Manufactured Home Construction and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-13

... Information Collection: Comment Request Manufactured Home Construction and Safety Standards Program AGENCY... FR 45648, HUD published Manufactured Home Construction and Safety Standards Program. The forms were.... This Notice also lists the following information: Title of Proposal: Manufactured Home Construction and...

Criterion for Estimation of Ecological Safety of Objects of Urban Transport Construction

NASA Astrophysics Data System (ADS)

Bakaeva, N. V.; Chernyaeva, I. V.

2017-11-01

A new approach to assess the ecological safety of the urban environment including urban transport facilities is being considered. The chemical and acoustic pollution of the environment from the impact of the urban transport construction objects is analyzed. The description of the sustainable state concept and ecological balance of the urban environment is given. A criterion for assessing environmental safety based on a comprehensive indicator of the city’s biosphere compatibility was proposed. The scale of environmental safety assessments is constructed.

Safety Climate Among Nontraditional Workers in Construction: Arguing for a Focus on Construed External Safety Image.

PubMed

Stiehl, Emily; Forst, Linda

2018-05-01

Safety climate, employees' perceptions of work-related safety, 1 has been promoted as a leading indicator of workplace safety in construction. 2 , 3 While research has primarily examined internal organizational sources (e.g., manager attitudes, formal organizational policies) on these perceptions, external sources of information might be more relevant to construction workers in nontraditional jobs who work for a limited time and/or have limited interaction with other employees. This paper argues for the future development of a construed external safety image scale to measure employees' perceptions about how external groups view their organization's safety. 4 The construed external safety image would capture the external sources that nontraditional workers use to assess safety climate and will allow public health researchers to identify and change dangerous workplaces while more effectively communicating information about safe workplaces to workers. The public health relevance of safety climate and construed external safety image for monitoring and communicating safety to nontraditional workers require examination.

Maritime Transportation Risk Assessment of Tianjin Port with Bayesian Belief Networks.

PubMed

Zhang, Jinfen; Teixeira, Ângelo P; Guedes Soares, C; Yan, Xinping; Liu, Kezhong

2016-06-01

This article develops a Bayesian belief network model for the prediction of accident consequences in the Tianjin port. The study starts with a statistical analysis of historical accident data of six years from 2008 to 2013. Then a Bayesian belief network is constructed to express the dependencies between the indicator variables and accident consequences. The statistics and expert knowledge are synthesized in the Bayesian belief network model to obtain the probability distribution of the consequences. By a sensitivity analysis, several indicator variables that have influence on the consequences are identified, including navigational area, ship type and time of the day. The results indicate that the consequences are most sensitive to the position where the accidents occurred, followed by time of day and ship length. The results also reflect that the navigational risk of the Tianjin port is at the acceptable level, despite that there is more room of improvement. These results can be used by the Maritime Safety Administration to take effective measures to enhance maritime safety in the Tianjin port. © 2016 Society for Risk Analysis.

Foremen’s Intervention to Prevent Falls and Increase Safety Communication at Residential Construction Sites

PubMed Central

Kaskutas, Vicki; Buckner-Petty, Skye; Dale, Ann Marie; Gaal, John; Evanoff, Bradley A.

2017-01-01

Background This research aimed to improve residential construction foremen’s communication skills and safety behaviors of their crewmembers when working at heights. Methods Eighty-four residential construction foremen participated in the 8-hour fall prevention and safety communication training. We compared pre-intervention surveys from foremen and their crewmembers to measure the effect of training. Results Foremen and crewmembers’ ratings showed improvements in fall prevention knowledge, behaviors, and safety communication and were sustained 6-months post-training, with emphasized areas demonstrating larger increases. Ratings were similar between foremen and crewmembers, suggesting that the foremen effectively taught their crew and assigned accurate ratings. Based upon associations between safety behaviors and reported falls observed in prior research, we would expect a 16.6% decrease in the one year cumulative incidence of self-reported falls post-intervention. Conclusions This intervention improved safety knowledge and behaviors of a large number of workers by training construction foremen in fall prevention and safety communication skills. PMID:27345465

Simulation-based assessment for construction helmets.

PubMed

Long, James; Yang, James; Lei, Zhipeng; Liang, Daan

2015-01-01

In recent years, there has been a concerted effort for greater job safety in all industries. Personnel protective equipment (PPE) has been developed to help mitigate the risk of injury to humans that might be exposed to hazardous situations. The human head is the most vulnerable to impact as a moderate magnitude can cause serious injury or death. That is why industries have required the use of an industrial hard hat or helmet. There have only been a few articles published to date that are focused on the risk of head injury when wearing an industrial helmet. A full understanding of the effectiveness of construction helmets on reducing injury is lacking. This paper presents a simulation-based method to determine the threshold at which a human will sustain injury when wearing a construction helmet and assesses the risk of injury for wearers of construction helmets or hard hats. Advanced finite element, or FE, models were developed to study the impact on construction helmets. The FE model consists of two parts: the helmet and the human models. The human model consists of a brain, enclosed by a skull and an outer layer of skin. The level and probability of injury to the head was determined using both the head injury criterion (HIC) and tolerance limits set by Deck and Willinger. The HIC has been widely used to assess the likelihood of head injury in vehicles. The tolerance levels proposed by Deck and Willinger are more suited for finite element models but lack wide-scale validation. Different cases of impact were studied using LSTC's LS-DYNA.

Structural equation model to investigate the dimensions influencing safety culture improvement in construction sector: A case in Indonesia

NASA Astrophysics Data System (ADS)

Machfudiyanto, Rossy Armyn; Latief, Yusuf; Yogiswara, Yoko; Setiawan, R. Mahendra Fitra

2017-06-01

In facing the ASEAN Economic Community, the level of prevailing working accidents becomes one of the competitiveness factors among the companies. A construction industry is one of the industries prone to high level of accidents. Improving the safety record will not be completely effective unless the occupational safety and healthy culture is enhanced. The aim of this research was to develop a model and to conduct empirical investigation on the relationships among the dimensions of construction occupational safety culture. This research used the structural equation model as a means to examine the hypothesis of positive relationships between dimensions and objectives. The method used in this research was questionnaire survey which was distributed to the respondents from construction companies in a state-owned enterprise in Indonesia. Moreover, there were dimensions of occupational safety culture that was established, such as leadership, behavior, value, strategy, policy, process, employee, safety cost, and contract system. The results of this study indicated that all dimensions were significant and inter-related in forming the safety culture. The result of R2 yielded the safety performance was 54%, which means it was in low category and evaluation of policies on construction companies was required in addressing the issue of working accidents.

Finding of No Significant Impact and Finding of No Practicable Alternative Construction of a Warehouse Complex MacDill Air Force Base, Florida

DTIC Science & Technology

2010-05-31

that Federal agencies identify and assess environmental health and safety risks that might disproportionately affect children. The Proposed Action...extra water is sent to one irrigation field near Golf Course Avenue and Affected Environment Environmental Assessment for Warehouse Complex...the area . Environmental Consequences Environmental Assessment for Warehouse Complex MacDill AFB, Florida FEBRUARY 2010 4-15 FINAL Figure

Electrical deaths in the US construction: an analysis of fatality investigations.

PubMed

Zhao, Dong; Thabet, Walid; McCoy, Andrew; Kleiner, Brian

2014-01-01

Electrocution is among the 'fatal four' in US construction according to the Occupational Safety and Health Administration. Learning from failures is believed to be an effective path to success, with deaths being the most serious system failures. This paper examined the failures in electrical safety by analysing all electrical fatality investigations (N = 132) occurring between 1989 and 2010 from the Fatality Assessment and Control Evaluation programme that is completed by the National Institute of Occupational Safety and Health. Results reveal the features of the electrical fatalities in construction and disclose the most common electrical safety challenges on construction sites. This research also suggests the sociotechnical system breakdowns and the less effectiveness of current safety training programmes may significantly contribute to worker's unsafe behaviours and electrical fatality occurrences.

Designing new institutions for implementing integrated disaster risk management: key elements and future directions.

PubMed

Gopalakrishnan, Chennat; Okada, Norio

2007-12-01

The goal of integrated disaster risk management is to promote an overall improvement in the quality of safety and security in a region, city or community at disaster risk. This paper presents the case for a thorough overhaul of the institutional component of integrated disaster risk management. A review of disaster management institutions in the United States indicates significant weaknesses in their ability to contribute effectively to the implementation of integrated disaster risk management. Our analysis and findings identify eight key elements for the design of dynamic new disaster management institutions. Six specific approaches are suggested for incorporating the identified key elements in building new institutions that would have significant potential for enhancing the effective implementation of integrated disaster risk management. We have developed a possible blueprint for effective design and construction of efficient, sustainable and functional disaster management institutions.

Analysis of construction injury burden by type of work.

PubMed

Lowery, J T; Glazner, J; Borgerding, J A; Bondy, J; Lezotte, D C; Kreiss, K

2000-04-01

To lay groundwork for identifying patterns of injury etiology, we sought to describe injury experience associated with types of work performed at construction sites by examining workers' compensation (WC) claims for the 32,081 construction workers who built Denver International Airport (DIA). Injury rates and WC payment rates were calculated for 25 types of work based on claims and payroll data reported to DIA's owner-controlled insurance program according to National Council on Compensation Insurance job classifications. By linking DIA claims with corresponding lost-work-time (LWT) claims filed with Colorado's Workers' Compensation Division, we were also able to obtain and examine both total and median lost days for each type of work. Injury experience varied widely among the types of construction work. Workers building elevators and conduits and installing glass, metal, or steel were at particularly high risk of both LWT and non-LWT injury. Median days lost by injured workers was highest (202 days) for driving/trucking. Median days lost for most types of work was much greater than previously reported for construction: 40 days or more for 18 of the 25 types of work analyzed. WC payment rates reflect both number and severity of injuries and were generally not significantly different from expected losses. They were, however, significantly higher than expected for driving/trucking, metal/steel installation, inspection/analysis, and elevator construction. Analysis of injury data by type of work allows targeting of safety resources to high risk construction work and would be useful in prospective surveillance at large construction sites with centrally administered workers' compensation plans. Copyright 2000 Wiley-Liss, Inc.

Automating the Generation of Heterogeneous Aviation Safety Cases

NASA Technical Reports Server (NTRS)

Denney, Ewen W.; Pai, Ganesh J.; Pohl, Josef M.

2012-01-01

A safety case is a structured argument, supported by a body of evidence, which provides a convincing and valid justification that a system is acceptably safe for a given application in a given operating environment. This report describes the development of a fragment of a preliminary safety case for the Swift Unmanned Aircraft System. The construction of the safety case fragment consists of two parts: a manually constructed system-level case, and an automatically constructed lower-level case, generated from formal proof of safety-relevant correctness properties. We provide a detailed discussion of the safety considerations for the target system, emphasizing the heterogeneity of sources of safety-relevant information, and use a hazard analysis to derive safety requirements, including formal requirements. We evaluate the safety case using three classes of metrics for measuring degrees of coverage, automation, and understandability. We then present our preliminary conclusions and make suggestions for future work.

Highway Safety Program Manual: Volume 12: Highway Design, Construction and Maintenance.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 12 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) focuses on highway design, construction and maintenance. The purpose and specific objectives of such a program are described. Federal authority in the area of highway safety and policies regarding…

78 FR 71546 - Safety Zone; Belt Parkway Bridge Construction, Gerritsen Inlet, Brooklyn, NY

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-29

... 1625-AA00 Safety Zone; Belt Parkway Bridge Construction, Gerritsen Inlet, Brooklyn, NY AGENCY: Coast... safety zone on the navigable waters of Gerritsen Inlet surrounding the Belt Parkway Bridge. This proposed rule would allow the Coast Guard to prohibit all vessel traffic through the safety zone during bridge...

A hybrid simulation approach for integrating safety behavior into construction planning: An earthmoving case study.

PubMed

Goh, Yang Miang; Askar Ali, Mohamed Jawad

2016-08-01

One of the key challenges in improving construction safety and health is the management of safety behavior. From a system point of view, workers work unsafely due to system level issues such as poor safety culture, excessive production pressure, inadequate allocation of resources and time and lack of training. These systemic issues should be eradicated or minimized during planning. However, there is a lack of detailed planning tools to help managers assess the impact of their upstream decisions on worker safety behavior. Even though simulation had been used in construction planning, the review conducted in this study showed that construction safety management research had not been exploiting the potential of simulation techniques. Thus, a hybrid simulation framework is proposed to facilitate integration of safety management considerations into construction activity simulation. The hybrid framework consists of discrete event simulation (DES) as the core, but heterogeneous, interactive and intelligent (able to make decisions) agents replace traditional entities and resources. In addition, some of the cognitive processes and physiological aspects of agents are captured using system dynamics (SD) approach. The combination of DES, agent-based simulation (ABS) and SD allows a more "natural" representation of the complex dynamics in construction activities. The proposed hybrid framework was demonstrated using a hypothetical case study. In addition, due to the lack of application of factorial experiment approach in safety management simulation, the case study demonstrated sensitivity analysis and factorial experiment to guide future research. Copyright © 2015 Elsevier Ltd. All rights reserved.

15 CFR 270.352 - Public safety information.

Code of Federal Regulations, 2012 CFR

2012-01-01

... INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence; Information Created Pursuant to an... Team, NIST, and any other investigation participant will not publicly release any information it...

15 CFR 270.352 - Public safety information.

Code of Federal Regulations, 2011 CFR

2011-01-01

... INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence; Information Created Pursuant to an... Team, NIST, and any other investigation participant will not publicly release any information it...

15 CFR 270.352 - Public safety information.

Code of Federal Regulations, 2010 CFR

2010-01-01

... INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence; Information Created Pursuant to an... Team, NIST, and any other investigation participant will not publicly release any information it...

15 CFR 270.352 - Public safety information.

Code of Federal Regulations, 2013 CFR

2013-01-01

... INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence; Information Created Pursuant to an... Team, NIST, and any other investigation participant will not publicly release any information it...

33 CFR 165.T11-281 - Safety Zone; Lake Mead Intake Construction; Lake Mead, Boulder City, NV.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Safety Zone; Lake Mead Intake Construction; Lake Mead, Boulder City, NV. 165.T11-281 Section 165.T11-281 Navigation and Navigable Waters... Coast Guard District § 165.T11-281 Safety Zone; Lake Mead Intake Construction; Lake Mead, Boulder City...

An empirical survey of the benefits of implementing pay for safety scheme (PFSS) in the Hong Kong construction industry.

PubMed

Chan, Daniel W M; Chan, Albert P C; Choi, Tracy N Y

2010-10-01

The Government of the Hong Kong Special Administrative Region (SAR) has implemented different safety initiatives to improve the safety performance of the construction industry over the past decades. The Pay for Safety Scheme (PFSS), which is one of the effective safety measures launched by the government in 1996, has been widely adopted in the public works contracts. Both the accident rate and fatality rate of public sector projects have decreased noticeably over this period. This paper aims to review the current state of application of PFSS in Hong Kong, and attempts to identify and analyze the perceived benefits of PFSS in construction via an industry-wide empirical questionnaire survey. A total of 145 project participants who have gained abundant hands-on experience with the PFSS construction projects were requested to complete a survey questionnaire to indicate the relative importance of those benefits identified in relation to PFSS. The perceived benefits were measured and ranked from the perspectives of the client and contractor for crosscomparison. The survey findings suggested the most significant benefits derived from adopting PFSS were: (a) Increased safety training; (b) Enhanced safety awareness; (c) Encouragement of developing safety management system; and (d) Improved safety commitment. A wider application of PFSS should be advocated so as to achieve better safety performance within the construction industry. It is recommended that a similar scheme to the PFSS currently adopted in Hong Kong may be developed for implementation in other regions or countries for international comparisons. Copyright © 2010 Elsevier Ltd and National Safety Council. All rights reserved.

Implementing Toxicity Testing in the 21st Century (TT21C): Making safety decisions using toxicity pathways, and progress in a prototype risk assessment.

PubMed

Adeleye, Yeyejide; Andersen, Melvin; Clewell, Rebecca; Davies, Michael; Dent, Matthew; Edwards, Sue; Fowler, Paul; Malcomber, Sophie; Nicol, Beate; Scott, Andrew; Scott, Sharon; Sun, Bin; Westmoreland, Carl; White, Andrew; Zhang, Qiang; Carmichael, Paul L

2015-06-05

Risk assessment methodologies in toxicology have remained largely unchanged for decades. The default approach uses high dose animal studies, together with human exposure estimates, and conservative assessment (uncertainty) factors or linear extrapolations to determine whether a specific chemical exposure is 'safe' or 'unsafe'. Although some incremental changes have appeared over the years, results from all new approaches are still judged against this process of extrapolating high-dose effects in animals to low-dose exposures in humans. The US National Research Council blueprint for change, entitled Toxicity Testing in the 21st Century: A Vision and Strategy called for a transformation of toxicity testing from a system based on high-dose studies in laboratory animals to one founded primarily on in vitro methods that evaluate changes in normal cellular signalling pathways using human-relevant cells or tissues. More recently, this concept of pathways-based approaches to risk assessment has been expanded by the description of 'Adverse Outcome Pathways' (AOPs). The question, however, has been how to translate this AOP/TT21C vision into the practical tools that will be useful to those expected to make safety decisions. We have sought to provide a practical example of how the TT21C vision can be implemented to facilitate a safety assessment for a commercial chemical without the use of animal testing. To this end, the key elements of the TT21C vision have been broken down to a set of actions that can be brought together to achieve such a safety assessment. Such components of a pathways-based risk assessment have been widely discussed, however to-date, no worked examples of the entire risk assessment process exist. In order to begin to test the process, we have taken the approach of examining a prototype toxicity pathway (DNA damage responses mediated by the p53 network) and constructing a strategy for the development of a pathway based risk assessment for a specific chemical in a case study mode. This contribution represents a 'work-in-progress' and is meant to both highlight concepts that are well-developed and identify aspects of the overall process which require additional development. To guide our understanding of what a pathways-based risk assessment could look like in practice, we chose to work on a case study chemical (quercetin) with a defined human exposure and to bring a multidisciplinary team of chemists, biologists, modellers and risk assessors to work together towards a safety assessment. Our goal was to see if the in vitro dose response for quercetin could be sufficiently understood to construct a TT21C risk assessment without recourse to rodent carcinogenicity study data. The data presented include high throughput pathway biomarkers (p-H2AX, p-ATM, p-ATR, p-Chk2, p53, p-p53, MDM2 and Wip1) and markers of cell-cycle, apoptosis and micronuclei formation, plus gene transcription in HT1080 cells. Eighteen point dose response curves were generated using flow cytometry and imaging to determine the concentrations that resulted in significant perturbation. NOELs and BMDs were compared to the output from biokinetic modelling and the potential for in vitro to in vivo extrapolation explored. A first tier risk assessment was performed comparing the total quercetin concentration in the in vitro systems with the predicted total quercetin concentration in plasma and tissues. The shortcomings of this approach and recommendations for improvement are described. This paper therefore describes the current progress in an ongoing research effort aimed at providing a pathways-based, proof-of-concept in vitro-only safety assessment for a consumer use product. Copyright © 2014 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

Latino immigrant day laborer perceptions of occupational safety and health information preferences.

PubMed

Díaz Fuentes, Claudia M; Martinez Pantoja, Leonardo; Tarver, Meshawn; Geschwind, Sandy A; Lara, Marielena

2016-06-01

We address immigrant day laborers' experiences with occupational safety in the construction industry in New Orleans, and opinions about content and method of communication for educational interventions to reduce occupational risks. In 2011, we conducted seven focus groups with 48 Spanish-speaking day laborers (8 women, 40 men, 35 years on average). Focus group results are based on thematic analysis. Most employers did not provide safety equipment, threatened to dismiss workers who asked for it, and did not provide health insurance. Attitudes toward accepting unsafe work conditions varied. Women faced lower pay and hiring difficulties than men. Day laborers preferred audio format over written, and content about consequences from and equipment for different jobs/exposures. Day laborers have common occupational experiences, but differences existed by gender, literacy and sense of control over safety. Day laborer information preferences and use of media needs further studying. Am. J. Ind. Med. 59:476-485, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Early Design Choices: Capture, Model, Integrate, Analyze, Simulate

NASA Technical Reports Server (NTRS)

Malin, Jane T.

2004-01-01

I. Designs are constructed incrementally to meet requirements and solve problems: a) Requirements types: objectives, scenarios, constraints, ilities. etc. b) Problem/issue types: risk/safety, cost/difficulty, interaction, conflict, etc. II. Capture requirements, problems and solutions: a) Collect design and analysis products and make them accessible for integration and analysis; b) Link changes in design requirements, problems and solutions; and c) Harvest design data for design models and choice structures. III. System designs are constructed by multiple groups designing interacting subsystems a) Diverse problems, choice criteria, analysis methods and point solutions. IV. Support integration and global analysis of repercussions: a) System implications of point solutions; b) Broad analysis of interactions beyond totals of mass, cost, etc.

Fire safety of wood construction

Treesearch

Robert H. White; Mark A. Dietenberger

2010-01-01

Fire safety is an important concern in all types of construction. The high level of national concern for fire safety is reflected in limitations and design requirements in building codes. These code requirements and related fire performance data are discussed in the context of fire safety design and evaluation in the initial section of this chapter. Because basic data...

46 CFR 189.60-5 - Cargo Ship Safety Construction Certificate.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Cargo Ship Safety Construction Certificate. 189.60-5 Section 189.60-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS INSPECTION AND CERTIFICATION Certificates Under International Convention for Safety of Life at Sea, 1974 § 189.60-5 Cargo Ship Safety...

Safety cost management in construction companies: A proposal classification.

PubMed

López-Alonso, M; Ibarrondo-Dávila, M P; Rubio, M C

2016-06-16

Estimating health and safety costs in the construction industry presents various difficulties, including the complexity of cost allocation, the inadequacy of data available to managers and the absence of an accounting model designed specifically for safety cost management. Very often, the costs arising from accidents in the workplace are not fully identifiable due to the hidden costs involved. This paper reviews some studies of occupational health and safety cost management and proposes a means of classifying these costs. We conducted an empirical study in which the health and safety costs of 40 construction worksites are estimated. A new classification of the health and safety cost and its categories is proposed: Safety and non-safety costs. The costs of the company's health and safety policy should be included in the information provided by the accounting system, as a starting point for analysis and control. From this perspective, a classification of health and safety costs and its categories is put forward.

75 FR 13342 - Pipeline Safety: Workshop on Distribution Pipeline Construction

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-19

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket ID... natural gas distribution construction. Natural gas distribution pipelines are subject to a unique subset... distribution pipeline construction practices. This workshop will focus solely on natural gas distribution...

Improve safety of workers during highway construction and maintenance.

DOT National Transportation Integrated Search

2007-06-01

This study will focus on highway construction worker safety. Most all statistical data gathered will be from Kentucky construction workers, although the study is not limited by this. Studies of this nature have been completed previously, but most stu...

Protest and survive, the U.K. Construction Safety Campaign: a case study of workers' and victims' family action and legal and regulatory inaction on construction health and safety.

PubMed

Holder, Mick; O'Brien, Tony

2007-01-01

The U.K. Construction Safety Campaign, based on grass-roots rank-and-file trade union activity, has both a domestic agenda and a wider sphere with regard to international developments. Using organized protests and media exposure to achieve its ends, the Campaign has contributed substantially to reducing injuries and fatalities in the U.K. construction industry, as well as achieving some justice for victims of the industry's neglect of safe management practices.

Revisiting Pneumatic Nail Gun Trigger Recommendations

PubMed Central

Albers, James; Lipscomb, Hester; Hudock, Stephen; Dement, John; Evanoff, Bradley; Fullen, Mark; Gillen, Matt; Kaskutas, Vicki; Nolan, James; Patterson, Dennis; Platner, James; Pompeii, Lisa; Schoenfisch, Ashley

2015-01-01

Summary Use of a pneumatic nail gun with a sequential actuation trigger (SAT) significantly diminishes the risk for acute traumatic injury compared to use of a contact actuation trigger (CAT) nail gun. A theoretically-based increased risk of work-related musculoskeletal disorders from use of a SAT nail gun, relative to CAT, appears unlikely and remains unproven. Based on current knowledge, the use of CAT nail guns cannot be justified as a safe alternative to SAT nail guns. This letter provides a perspective of ergonomists and occupational safety researchers recommending the use of the sequential actuation trigger for all nail gun tasks in the construction industry. PMID:26366020

Earthquake hazards: a national threat

USGS Publications Warehouse

,

2006-01-01

Earthquakes are one of the most costly natural hazards faced by the Nation, posing a significant risk to 75 million Americans in 39 States. The risks that earthquakes pose to society, including death, injury, and economic loss, can be greatly reduced by (1) better planning, construction, and mitigation practices before earthquakes happen, and (2) providing critical and timely information to improve response after they occur. As part of the multi-agency National Earthquake Hazards Reduction Program, the U.S. Geological Survey (USGS) has the lead Federal responsibility to provide notification of earthquakes in order to enhance public safety and to reduce losses through effective forecasts based on the best possible scientific information.

[Analysis of the mechanisms of minor occupational injuries in the construction industry in Spain].

PubMed

Benavides, F G; Giráldez, M T; Castejón, E; Catot, N; Zaplana, M; Delclós, J; Benach, J; Gimeno, D

2003-01-01

The construction industry produces the highest number of occupational injuries in Spain (25.6%). Of these, 98.5% were minor injuries with 5 million workdays lost in 2000. This occurred even after the recent introduction of numerous health and occupational safety regulations. The objective of the present study was to identify the specific mechanisms of minor occupational injuries in the construction sector. In 2000, there were 235,853 minor occupational injuries in the construction industry. From these, injuries in general construction and civil engineering were selected (n = 155,044). These injuries affected both the total number of workers in the sector as well as bricklayers and unskilled construction workers. Insurance and financial activities (n = 2,019) were selected as a reference economic sector. Minor occupational injuries due to nontraumatic processes (heart attack, etc.) were taken as a control group (n = 167), assuming that the risk of nontraumatic processes was independent of economic activities. Odds ratios (OR) were adjusted by age, sex, years of work experience, type of employment and company size through nonconditional logistic regression models. The mechanisms with the highest risk of minor occupational lesions in construction workers as a group compared with employees in the financial sector were projection of fragments (OR = 33.0; 95% CI, 15.3-70.8) and being struck by objects (OR = 18.2; CI 95%, 9.7-34.1). These were also the most specific mechanisms of injury in the subgroup of bricklayers and unskilled construction workers. Activities aimed at preventing minor occupational injuries in the construction sector should be orientated towards these mechanisms, especially projection of fragments despite the low frequency of this mechanism compared with that of other mechanisms. Case-control design is a useful alternative approach for research into occupational injuries.

15 CFR 270.315 - Subpoenas.

Code of Federal Regulations, 2010 CFR

2010-01-01

... STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence; Information Created Pursuant to an Investigation...

15 CFR 270.315 - Subpoenas.

Code of Federal Regulations, 2014 CFR

2014-01-01

... STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence; Information Created Pursuant to an Investigation...

15 CFR 270.315 - Subpoenas.

Code of Federal Regulations, 2011 CFR

2011-01-01

... STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence; Information Created Pursuant to an Investigation...

15 CFR 270.315 - Subpoenas.

Code of Federal Regulations, 2013 CFR

2013-01-01

... STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence; Information Created Pursuant to an Investigation...

15 CFR 270.315 - Subpoenas.

Code of Federal Regulations, 2012 CFR

2012-01-01

... STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence; Information Created Pursuant to an Investigation...

What's gender got to do with it? Examining masculinities, health and safety and return to work in male dominated skilled trades.

PubMed

Stergiou-Kita, Mary; Mansfield, Elizabeth; Colantonio, Angela; Moody, Joel; Mantis, Steve

2016-06-16

Electrical injuries are a common cause of work-related injury in male dominated skilled trades. In this study we explored how issues of gender, masculinities and institutional workplace practices shape expectations of men and their choices when returning to work following a workplace electrical injury. Twelve workers, who suffered an electrical injury, and twelve employer representatives, completed semi-structured interviews. Using thematic analysis we identified key themes related to how masculinities influenced men's health and safety during the return to work process. Strong identification with worker roles can influence injured workers decisions to return to work 'too early'. A desire to be viewed as a strong, responsible, resilient worker may intersect with concerns about job loss, to influence participants' decisions to not report safety issues and workplace accidents, to not disclose post-injury work challenges, and to not request workplace supports. Institutionalized workplace beliefs regarding risk, de-legitimization of the severity of injuries, and the valorization of the "tough" worker can further re-enforce dominant masculine norms and influence return to work processes and health and safety practices. Workplaces are key sites where gender identities are constructed, affirmed and institutionalized. Further research is warranted to examine how established masculine norms and gendered workplace expectations can influence workplace health and safety in male dominated high risk occupations. Future research should also evaluate strategies that encourage men to discuss post-injury work challenges and request supports when work performance or health and safety issues arise during the return to work process.

Patient safety room of horrors: a novel method to assess medical students and entering residents' ability to identify hazards of hospitalisation.

PubMed

Farnan, Jeanne M; Gaffney, Sean; Poston, Jason T; Slawinski, Kris; Cappaert, Melissa; Kamin, Barry; Arora, Vineet M

2016-03-01

Patient safety curricula in undergraduate medical education (UME) are often didactic format with little focus on skills training. Despite recent focus on safety, practical training in residency education is also lacking. Assessments of safety skills in UME and graduate medical education (GME) are generally knowledge, and not application-focused. We aimed to develop and pilot a safety-focused simulation with medical students and interns to assess knowledge regarding hazards of hospitalisation. A simulation demonstrating common hospital-based safety threats was designed. A case scenario was created including salient patient information and simulated safety threats such as the use of upper-extremity restraints and medication errors. After entering the room and reviewing the mock chart, learners were timed and asked to identify and document as many safety hazards as possible. Learner satisfaction was assessed using constructed-response evaluation. Descriptive statistics, including per cent correct and mean correct hazards, were performed. All 86 third-year medical students completed the encounter. Some hazards were identified by a majority of students (fall risk, 83% of students) while others were rarely identified (absence of deep venous thrombosis prophylaxis, 13% of students). Only 5% of students correctly identified pressure ulcer risk. 128 of 131 interns representing 49 medical schools participated in the GME implementation. Incoming interns were able to identify a mean of 5.1 hazards out of the 9 displayed (SD 1.4) with 40% identifying restraints as a hazard, and 20% identifying the inappropriate urinary catheter as a hazard. A simulation showcasing safety hazards was a feasible and effective way to introduce trainees to safety-focused content. Both students and interns had difficulty identifying common hazards of hospitalisation. Despite poor performance, learners appreciated the interactive experience and its clinical utility. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Contractor-, steward-, and coworker-safety practice: associations with musculoskeletal pain and injury-related absence among construction apprentices.

PubMed

Kim, Seung-Sup; Dutra, Lauren M; Okechukwu, Cassandra A

2014-07-01

This paper sought to assess organizational safety practices at three different levels of hierarchical workplace structure and to examine their association with injury outcomes among construction apprentices. Using a cross-sectional sample of 1,775 construction apprentices, three measures of organizational safety practice were assessed: contractor-, steward-, and coworker-safety practice. Each safety practice measure was assessed using three similar questions (i.e., on-the-job safety commitment, following required or recommended safe work practices, and correcting unsafe work practices); the summed average of the responses ranged from 1 to 4, with a higher score indicating poorer safety practice. Outcome variables included the prevalence of four types of musculoskeletal pain (i.e., neck, shoulder, hand, and back pain) and injury-related absence. In adjusted analyses, contractor-safety practice was associated with both hand pain (OR: 1.27, 95 % CI: 1.04, 1.54) and back pain (OR: 1.40, 95 % CI: 1.17, 1.68); coworker-safety practice was related to back pain (OR: 1.42, 95 % CI: 1.18, 1.71) and injury-related absence (OR: 1.36, 95 % CI: 1.11, 1.67). In an analysis that included all three safety practice measures simultaneously, the association between coworker-safety practice and injury-related absence remained significant (OR: 1.68, 95 % CI: 1.20, 2.37), whereas all other associations became non-significant. This study suggests that organizational safety practice, particularly coworker-safety practice, is associated with injury outcomes among construction apprentices.

Development of the SaFETy Score: A Clinical Screening Tool for Predicting Future Firearm Violence Risk

PubMed Central

Goldstick, Jason E.; Carter, Patrick M.; Walton, Maureen A.; Dahlberg, Linda L.; Sumner, Steven A.; Zimmerman, Marc A.; Cunningham, Rebecca M.

2017-01-01

Background Interpersonal firearm violence among youth is a substantial public health problem, and emergency department (ED) physicians require a clinical screening tool to identify high-risk youth. Objective To derive a clinically feasible risk index for firearm violence. Design 24-month prospective cohort study. Setting Urban, level 1 ED. Participants Substance-using youths, aged 14 to 24 years, seeking ED care for an assault-related injury and a proportionately sampled group of non–assault-injured youth enrolled from September 2009 through December 2011. Measurements Firearm violence (victimization/perpetration) and validated questionnaire items. Results A total of 599 youths were enrolled, and presence/absence of future firearm violence during follow-up could be ascertained in 483 (52.2% were positive). The sample was randomly split into training (75%) and post–score-construction validation (25%) sets. Using elastic-net penalized logistic regression, 118 baseline predictors were jointly analyzed; the most predictive variables fell predominantly into 4 domains: violence victimization, community exposure, peer influences, and fighting. By selection of 1 item from each domain, the 10-point SaFETy (Serious fighting, Friend weapon carrying, community Environment, and firearm Threats) score was derived. SaFETy was associated with firearm violence in the validation set (odds ratio [OR], 1.47 [95% CI, 1.23 to 1.79]); this association remained (OR, 1.44 [CI, 1.20 to 1.76]) after adjustment for reason for ED visit. In 5 risk strata observed in the training data, firearm violence rates in the validation set were 18.2% (2 of 11), 40.0% (18 of 45), 55.8% (24 of 43), 81.3% (13 of 16), and 100.0% (6 of 6), respectively. Limitations The study was conducted in a single ED and involved substance-using youths. SaFETy was not externally validated. Conclusion The SaFETy score is a 4-item score based on clinically feasible questionnaire items and is associated with firearm violence. Although broader validation is required, SaFETy shows potential to guide resource allocation for prevention of firearm violence. Primary Funding Source National Institute on Drug Abuse R01024646. PMID:28395357

The risks of radiation

NASA Astrophysics Data System (ADS)

Miettenen, Jorma K.

1988-01-01

The risks of radioactivity are a really complicated matter, yet they are much better known than are the risks relating to thousands of chemical poisons that occur in our environment. The greatest mistakes are probably made in the definition of safety margins. Except for the bombs dropped in Japan and one other case in the Marshall Islands, there has always—luckily—been a wide safety margin between fallout radiation and doses dangerous to health; the margin has actually been about 1000-fold. The Chernobyl dose of 0.5 mGy/year that we received is only 1/1000 of the acute dose of 0.5 Gy which would cause a slight and nonpermanent change in the blood picture. There is no such safety margin with respect to many air pollutants. The safety standards for sulfuric or nitric oxides, ozone and so on, have been set only just below the level that already causes a health hazard, and these standards are exceeded once in a while. Otherwise, traffic would have to be forbidden and many industrial plants, especially power stations using coal, would have to stop working whenever a low-temperature inversion occurred. Environmental radioactivity does not represent a likely health risk in Finland unless a nuclear war breaks out. Air pollutants, on the contrary, are a real and almost daily health risk that should be carefully considered when decisions about our energy production are being made. In spite of what happened at Chernobyl, global consumption of nuclear power will double by the year 2000, since there are about 140 nuclear power plants presently under construction. It is not likely that another catastrophe like Chernobyl will happen, yet nuclear plant accidents are of course possible, even if their likelihood is diminished by improving reactor safety and even if any eventual damage could be expected to be smaller. If a reactor is hooded by a containment structure, no significant release of radioactive materials should be possible even in case of an accident. However, we must be prepared to protect the population with carefully planned civil defense and radiation protection measures.

29 CFR 1926.706 - Requirements for masonry construction.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 8 2010-07-01 2010-07-01 false Requirements for masonry construction. 1926.706 Section 1926.706 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Concrete and Masonry...

Young worker safety in construction: do family ties and workgroup size affect hazard exposures and safety practices?

PubMed

Rauscher, Kimberly J; Myers, Douglas J; Runyan, Carol W; Schulman, Michael

2012-01-01

Little is known about how social aspects of the work environment influence exposures or safety practices affecting young construction workers. Our objective was to investigate whether working on a construction site with a small number of workers (≤10 vs. 11-50) or having a family-firm connection (working in a family-owned firm or one in which a family member also works) impacts hazard exposures and safety practices. Participants included 187 North Carolina construction workers 14 to 17 years old who were surveyed about their jobs. We conducted stratified analyses using cross-tabulations and chi-square statistics to measure associations between workgroup size (i.e., the total number of workers on a jobsite) and family-firm connections (yes/no) and hazard exposures (e.g., saws) and safety practices (e.g., supervision). Having a family-firm connection was associated with fewer hazard exposures and greater safety practices. Youth who worked on jobsites with a larger workgroup (11-50 workers) reported more hazards but also more safety practices. Family-firm connections, in particular, may have a protective effect for youth in construction. Even though the statistical significance of our findings on workgroup size was limited in places, the pattern of differences found suggest that further research in this area is warranted.

41 CFR 102-76.30 - What seismic safety standards must Federal agencies follow in the design and construction of...

Code of Federal Regulations, 2013 CFR

2013-07-01

... (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 76-DESIGN AND CONSTRUCTION Design and Construction... 41 Public Contracts and Property Management 3 2013-07-01 2013-07-01 false What seismic safety standards must Federal agencies follow in the design and construction of Federal facilities? 102-76.30...

41 CFR 102-76.30 - What seismic safety standards must Federal agencies follow in the design and construction of...

Code of Federal Regulations, 2011 CFR

2011-01-01

... (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 76-DESIGN AND CONSTRUCTION Design and Construction... 41 Public Contracts and Property Management 3 2011-01-01 2011-01-01 false What seismic safety standards must Federal agencies follow in the design and construction of Federal facilities? 102-76.30...

41 CFR 102-76.30 - What seismic safety standards must Federal agencies follow in the design and construction of...

Code of Federal Regulations, 2014 CFR

2014-01-01

... (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 76-DESIGN AND CONSTRUCTION Design and Construction... 41 Public Contracts and Property Management 3 2014-01-01 2014-01-01 false What seismic safety standards must Federal agencies follow in the design and construction of Federal facilities? 102-76.30...

41 CFR 102-76.30 - What seismic safety standards must Federal agencies follow in the design and construction of...

Code of Federal Regulations, 2012 CFR

2012-01-01

... (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 76-DESIGN AND CONSTRUCTION Design and Construction... 41 Public Contracts and Property Management 3 2012-01-01 2012-01-01 false What seismic safety standards must Federal agencies follow in the design and construction of Federal facilities? 102-76.30...

41 CFR 102-76.30 - What seismic safety standards must Federal agencies follow in the design and construction of...

Code of Federal Regulations, 2010 CFR

2010-07-01

... (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 76-DESIGN AND CONSTRUCTION Design and Construction... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What seismic safety standards must Federal agencies follow in the design and construction of Federal facilities? 102-76.30...

Foremen's intervention to prevent falls and increase safety communication at residential construction sites.

PubMed

Kaskutas, Vicki; Buckner-Petty, Skye; Dale, Ann Marie; Gaal, John; Evanoff, Bradley A

2016-10-01

This research aimed to improve residential construction foremen's communication skills and safety behaviors of their crewmembers when working at heights. Eighty-four residential construction foremen participated in the 8-hr fall prevention and safety communication training. We compared pre- and post-intervention surveys from foremen and their crewmembers to measure the effect of training. Foremen and crewmembers' ratings showed improvements in fall prevention knowledge, behaviors, and safety communication and were sustained 6-months post-training, with emphasized areas demonstrating larger increases. Ratings were similar between foremen and crewmembers, suggesting that the foremen effectively taught their crew and assigned accurate ratings. Based upon associations between safety behaviors and reported falls observed in prior research, we would expect a 16.6% decrease in the one year cumulative incidence of self-reported falls post-intervention. This intervention improved safety knowledge and behaviors of a large number of workers by training construction foremen in fall prevention and safety communication skills. Am. J. Ind. Med. 59:823-831, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Deriving Safety Cases from Automatically Constructed Proofs

NASA Technical Reports Server (NTRS)

Basir, Nurlida; Denney, Ewen; Fischer, Bernd

2009-01-01

Formal proofs provide detailed justification for the validity of claims and are widely used in formal software development methods. However, they are often complex and difficult to understand, because the formalism in which they are constructed and encoded is usually machine-oriented, and they may also be based on assumptions that are not justified. This causes concerns about the trustworthiness of using formal proofs as arguments in safety-critical applications. Here, we present an approach to develop safety cases that correspond to formal proofs found by automated theorem provers and reveal the underlying argumentation structure and top-level assumptions. We concentrate on natural deduction style proofs, which are closer to human reasoning than resolution proofs, and show how to construct the safety cases by covering the natural deduction proof tree with corresponding safety case fragments. We also abstract away logical book-keeping steps, which reduces the size of the constructed safety cases. We show how the approach can be applied to the proofs found by the Muscadet prover.

A Guide to the Design of Occupational Safety and Health Training for Immigrant, Latino/a Dairy Workers.

PubMed

Menger, Lauren M; Rosecrance, John; Stallones, Lorann; Roman-Muniz, Ivette Noami

2016-01-01

Industrialized dairy production in the U.S. relies on an immigrant, primarily Latino/a, workforce to meet greater production demands. Given the high rates of injuries and illnesses on U.S. dairies, there is pressing need to develop culturally appropriate training to promote safe practices among immigrant, Latino/a dairy workers. To date, there have been few published research articles or guidelines specific to developing effective occupational safety and health (OSH) training for immigrant, Latino/a workers in the dairy industry. Literature relevant to safety training for immigrant workers in agriculture and other high-risk industries (e.g., construction) was examined to identify promising approaches. The aim of this paper is to provide a practical guide for researchers and practitioners involved in the design and implementation of effective OSH training programs for immigrant, Latino/a workers in the dairy industry. The search was restricted to peer-reviewed academic journals and guidelines published between 1980 and 2015 by universities or extension programs, written in English, and related to health and safety training among immigrant, Latino/a workers within agriculture and other high-risk industries. Relevant recommendations regarding effective training transfer were also included from literature in the field of industrial-organizational psychology. A total of 97 articles were identified, of which 65 met the inclusion criteria and made a unique and significant contribution. The review revealed a number of promising strategies for how to effectively tailor health and safety training for immigrant, Latino/a workers in the dairy industry grouped under five main themes: (1) understanding and involving workers; (2) training content and materials; (3) training methods; (4) maximizing worker engagement; and (5) program evaluation. The identification of best practices in the design and implementation of training programs for immigrant, Latino/a workers within agriculture and other high-risk industries can inform the development of more effective and sustainable health and safety training for immigrant, Latino/a dairy workers in the U.S. and other countries.

Risk of cervical injuries in mixed martial arts.

PubMed

Kochhar, T; Back, D L; Mann, B; Skinner, J

2005-07-01

Mixed martial arts have rapidly succeeded boxing as the world's most popular full contact sport, and the incidence of injury is recognised to be high. To assess qualitatively and quantitatively the potential risk for participants to sustain cervical spine and associated soft tissue injuries. Four commonly performed manoeuvres with possible risks to the cervical spine were analysed with respect to their kinematics, and biomechanical models were constructed. Motion analysis of two manoeuvres revealed strong correlations with rear end motor vehicle impact injuries, and kinematics of the remaining two suggested a strong risk of injury. Mathematical models of the biomechanics showed that the forces involved are of the same order as those involved in whiplash injuries and of the same magnitude as compression injuries of the cervical spine. This study shows that there is a significant risk of whiplash injuries in this sport, and there are no safety regulations to address these concerns.

Risk of cervical injuries in mixed martial arts

PubMed Central

Kochhar, T; Back, D; Mann, B; Skinner, J

2005-01-01

Background: Mixed martial arts have rapidly succeeded boxing as the world's most popular full contact sport, and the incidence of injury is recognised to be high. Objective: To assess qualitatively and quantitatively the potential risk for participants to sustain cervical spine and associated soft tissue injuries. Methods: Four commonly performed manoeuvres with possible risks to the cervical spine were analysed with respect to their kinematics, and biomechanical models were constructed. Results: Motion analysis of two manoeuvres revealed strong correlations with rear end motor vehicle impact injuries, and kinematics of the remaining two suggested a strong risk of injury. Mathematical models of the biomechanics showed that the forces involved are of the same order as those involved in whiplash injuries and of the same magnitude as compression injuries of the cervical spine. Conclusions: This study shows that there is a significant risk of whiplash injuries in this sport, and there are no safety regulations to address these concerns. PMID:15976168

78 FR 7670 - Safety Zone; Indian Street Bridge Construction, St. Lucie Canal, Palm City, FL

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-04

... 1625-AA00 Safety Zone; Indian Street Bridge Construction, St. Lucie Canal, Palm City, FL AGENCY: Coast... zone on the St. Lucie Canal, Palm City, Florida to provide for the safety of life and vessels on a... on a narrow waterway. The temporary safety zone encompasses all waters of the St. Lucie Canal in the...

Adoption of Building Information Modelling in project planning risk management

NASA Astrophysics Data System (ADS)

Mering, M. M.; Aminudin, E.; Chai, C. S.; Zakaria, R.; Tan, C. S.; Lee, Y. Y.; Redzuan, A. A.

2017-11-01

An efficient and effective risk management required a systematic and proper methodology besides knowledge and experience. However, if the risk management is not discussed from the starting of the project, this duty is notably complicated and no longer efficient. This paper presents the adoption of Building Information Modelling (BIM) in project planning risk management. The objectives is to identify the traditional risk management practices and its function, besides, determine the best function of BIM in risk management and investigating the efficiency of adopting BIM-based risk management during the project planning phase. In order to obtain data, a quantitative approach is adopted in this research. Based on data analysis, the lack of compliance with project requirements and failure to recognise risk and develop responses to opportunity are the risks occurred when traditional risk management is implemented. When using BIM in project planning, it works as the tracking of cost control and cash flow give impact on the project cycle to be completed on time. 5D cost estimation or cash flow modeling benefit risk management in planning, controlling and managing budget and cost reasonably. There were two factors that mostly benefit a BIM-based technology which were formwork plan with integrated fall plan and design for safety model check. By adopting risk management, potential risks linked with a project and acknowledging to those risks can be identified to reduce them to an acceptable extent. This means recognizing potential risks and avoiding threat by reducing their negative effects. The BIM-based risk management can enhance the planning process of construction projects. It benefits the construction players in various aspects. It is important to know the application of BIM-based risk management as it can be a lesson learnt to others to implement BIM and increase the quality of the project.

Factors influencing worker use of personal protective eyewear.

PubMed

Lombardi, David A; Verma, Santosh K; Brennan, Melanye J; Perry, Melissa J

2009-07-01

To identify and describe the array of factors that influence a workers' decision to wear personal protective eyewear (PPE) and the barriers that exist in preventing their use. A series of focus groups enrolled workers and supervisors primarily from manufacturing, construction, or service/retail industries that had potential exposure to eye injury hazards in their job tasks. Focus group sessions were facilitated to collect qualitative and quantitative data in two categories, "sought information" and "emergent themes", related to the factors influencing use of PPE. We conducted a series of 7 groups with 51 participants, 36 (71%) males and 15 (29%) females ranging in age from 19 to 64 years old, from a variety of occupations including construction (24%), production (22%), installation, repair and maintenance (14%), and healthcare (10%). Most were highly experienced in their occupation (>10 years); males (86%) and females (53%), and had received some safety training in the past (82%). The majority of workers in this study were required to wear PPE on their worksite (78%), however only 55% had a dedicated safety officer. A conceptual model that summarizes the "sought information" and "emergent themes" is presented that depicts the decision making process for the factors influencing use of PPE and consists of three primary branches; perceptions of hazards and risks, "barriers" to PPE usage, and enforcement and reinforcement. Lack of comfort/fit, and fogging and scratching of the eyewear were suggested as the most important barriers to PPE usage. Younger age and lack of safety training were other important factors affecting use of PPE. Several potentially modifiable factors identified would lead to an increase in workers' PPE use and encourage supervisors to provide ongoing positive feedback on the continuous use of PPE by workers at risk for an eye injury.

[Is an effort needed in order to replace the punitive culture for the sake of patient safety?].

PubMed

Gutiérrez Ubeda, S R

2016-01-01

Efforts to introduce a safety culture have flourished in a growing number of health care organisations. However, many of these organisational efforts have been incomplete with respect to the manner on how to address the resistance to change offered by the prevailing punitive culture of healthcare organisations. The present article is intended to increase the awareness on three reasons of why an effort is needed to change the punitive culture before introducing the patient safety culture. The first reason is that the culture needs to be investigated and understood. The second reason is that culture is a complex construct, deeply embedded in organisations and their contexts, and thus difficult to change. The third reason is that punitive culture is not compatible with some components of safety culture, thus without removing it there are great possibilities that it would continue to be active and dominant over safety culture. These reasons suggest that, unless planning and executing effective interventions towards replacing punitive culture with safety culture, there is the risk that punitive culture would still prevail. Copyright © 2015 SECA. Published by Elsevier Espana. All rights reserved.

Application of the Digital Image Technology in the Visual Monitoring and Prediction of Shuttering Construction Safety

NASA Astrophysics Data System (ADS)

Ummin, Okumura; Tian, Han; Zhu, Haiyu; Liu, Fuqiang

2018-03-01

Construction safety has always been the first priority in construction process. The common safety problem is the instability of the template support. In order to solve this problem, the digital image measurement technology has been contrived to support real-time monitoring system which can be triggered if the deformation value exceed the specified range. Thus the economic loss could be reduced to the lowest level.

Plasma Hazards and Acceptance for International Space Station Extravehicular Activities

NASA Astrophysics Data System (ADS)

Patton, Thomas

2010-09-01

Extravehicular activity(EVA) is accepted by NASA and other space faring agencies as a necessary risk in order to build and maintain a safe and efficient laboratory in space. EVAs are used for standard construction and as contingency operations to repair critical equipment for vehicle sustainability and safety of the entire crew in the habitable volume. There are many hazards that are assessed for even the most mundane EVA for astronauts, and the vast majority of these are adequately controlled per the rules of the International Space Station Program. The need for EVA repair and construction has driven acceptance of a possible catastrophic hazard to the EVA crewmember which cannot currently be controlled adequately. That hazard is electrical shock from the very environment in which they work. This paper describes the environment, causes and contributors to the shock of EVA crewmembers attributed to the ionospheric plasma environment in low Earth orbit. It will detail the hazard history, and acceptance process for the risk associated with these hazards that give assurance to a safe EVA. In addition to the hazard acceptance process this paper will explore other factors that go into the decision to accept a risk including criticality of task, hardware design and capability, and the probability of hazard occurrence. Also included will be the required interaction between organizations at NASA(EVA Office, Environments, Engineering, Mission Operations, Safety) in order to build and eventually gain adequate acceptance rationale for a hazard of this kind. During the course of the discussion, all current methods of mitigating the hazard will be identified. This paper will capture the history of the plasma hazard analysis and processes used by the International Space Station Program to formally assess and qualify the risk. The paper will discuss steps that have been taken to identify and perform required analysis of the floating potential shock hazard from the ISS environment which eventually led to its status as an accepted risk for ISS EVAs.

Trends of Occupational Fatalities Involving Machines, United States, 1992–2010

PubMed Central

Marsh, Suzanne M.; Fosbroke, David E.

2016-01-01

Background This paper describes trends of occupational machine-related fatalities from 1992–2010. We examine temporal patterns by worker demographics, machine types (e.g., stationary, mobile), and industries. Methods We analyzed fatalities from Census of Fatal Occupational Injuries data provided by the Bureau of Labor Statistics to the National Institute for Occupational Safety and Health. We used injury source to identify machine-related incidents and Poisson regression to assess trends over the 19-year period. Results There was an average annual decrease of 2.8% in overall machine-related fatality rates from 1992 through 2010. Mobile machine-related fatality rates decreased an average of 2.6% annually and stationary machine-related rates decreased an average of 3.5% annually. Groups that continued to be at high risk included older workers; self-employed; and workers in agriculture/forestry/fishing, construction, and mining. Conclusion Addressing dangers posed by tractors, excavators, and other mobile machines needs to continue. High-risk worker groups should receive targeted information on machine safety. PMID:26358658

Cultural safety as an ethic of care: a praxiological process.

PubMed

McEldowney, Rose; Connor, Margaret J

2011-10-01

New writings broadening the construct of cultural safety, a construct initiated in Aotearoa New Zealand, are beginning to appear in the literature. Therefore, it is considered timely to integrate these writings and advance the construct into a new theoretical model. The new model reconfigures the constructs of cultural safety and cultural competence as an ethic of care informed by a postmodern perspective. Central to the new model are three interwoven, co-occurring components: an ethic of care, which unfolds within a praxiological process shaped by the context. Context is expanded through identifying the three concepts of relationality, generic competence, and collectivity, which are integral to each client-nurse encounter. The competence associated with cultural safety as an ethic of care is always in the process of development. Clients and nurses engage in a dialogue to establish the level of cultural safety achieved at given points in a care trajectory.

24 CFR 3280.1 - Scope.

Code of Federal Regulations, 2011 CFR

2011-04-01

... MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS General § 3280.1 Scope. This standard covers all equipment and installations in the design, construction, transportation, fire safety, plumbing, heat-producing...

24 CFR 3280.1 - Scope.

Code of Federal Regulations, 2014 CFR

2014-04-01

... MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS General § 3280.1 Scope. This standard covers all equipment and installations in the design, construction, transportation, fire safety, plumbing, heat-producing...

24 CFR 3280.1 - Scope.

Code of Federal Regulations, 2012 CFR

2012-04-01

... MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS General § 3280.1 Scope. This standard covers all equipment and installations in the design, construction, transportation, fire safety, plumbing, heat-producing...

24 CFR 3280.1 - Scope.

Code of Federal Regulations, 2013 CFR

2013-04-01

... MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS General § 3280.1 Scope. This standard covers all equipment and installations in the design, construction, transportation, fire safety, plumbing, heat-producing...

15 CFR 270.311 - Collection of evidence.

Code of Federal Regulations, 2014 CFR

2014-01-01

... INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence; Information Created Pursuant to an...

15 CFR 270.311 - Collection of evidence.

Code of Federal Regulations, 2013 CFR

2013-01-01

... INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence; Information Created Pursuant to an...

15 CFR 270.311 - Collection of evidence.

Code of Federal Regulations, 2010 CFR

2010-01-01

... INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence; Information Created Pursuant to an...

15 CFR 270.311 - Collection of evidence.

Code of Federal Regulations, 2012 CFR

2012-01-01

... INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence; Information Created Pursuant to an...

15 CFR 270.311 - Collection of evidence.

Code of Federal Regulations, 2011 CFR

2011-01-01

... INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence; Information Created Pursuant to an...

Assessment of the living and workplace health and safety conditions of site-resident construction workers in Tehran, Iran.

PubMed

Mohseni, Peyman Hossein; Farshad, Ali Asghar; Mirkazemi, Roksana; Orak, Rouhangiz Jamshidi

2015-01-01

The purpose of this study was to assess living and workplace safety conditions of construction workers in Tehran, Iran. This cross-sectional study was conducted among 410 construction sites in a municipal area of Tehran whose municipal building permits were issued in 2011. Data on ventilation, workplace safety and hygiene were collected by direct observation and interviews with site foremen. Noise levels were estimated from 10 sound-level-meter stations in the municipality area. Lack of ventilation in the workers' rooms was abundant. Bathrooms were unhygienic and minimum requirements such as lighting and ventilation did not exist in 80% of the cases. In nearly 50% of large construction sites, sewage and garbage disposal were inappropriate. Elevator safety was poor at all sites and no measures for fall prevention were present in over 88% of active construction sites. This study showed that the mean 24-h equivalent continuous sound level Leq was over 70 dB in 80% of the sites during weekdays. The results of this study revealed poor health and safety living and working conditions of construction workers in Tehran.

Department of Energy Construction Safety Reference Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-09-01

DOE has adopted the Occupational Safety and Health Administration (OSHA) regulations Title 29 Code of Federal Regulations (CFR) 1926 ``Safety and Health Regulations for Construction,`` and related parts of 29 CFR 1910, ``Occupational Safety and Health Standards.`` This nonmandatory reference guide is based on these OSHA regulations and, where appropriate, incorporates additional standards, codes, directives, and work practices that are recognized and accepted by DOE and the construction industry. It covers excavation, scaffolding, electricity, fire, signs/barricades, cranes/hoists/conveyors, hand and power tools, concrete/masonry, stairways/ladders, welding/cutting, motor vehicles/mechanical equipment, demolition, materials, blasting, steel erection, etc.

Construction of the Database of Rat Repeated-dose Toxicity Tests of Pesticides for the Toxicological Characterization of Hepatocyte Hypertrophy.

PubMed

Masuda, Akane; Masuda, Miyabi; Kawano, Takuya; Kitsunai, Yoko; Nakayama, Haruka; Nakajima, Hiroyuki; Kojima, Hiroyuki; Kitamura, Shigeyuki; Uramaru, Naoto; Hosaka, Takuomi; Sasaki, Takamitsu; Yoshinari, Kouichi

2017-01-01

Liver and hepatocyte hypertrophy can be induced by exposure to chemical compounds, but the mechanisms and toxicological characteristics of these phenomena have not yet been investigated extensively. In particular, it remains unclear whether the hepatocyte hypertrophy induced by chemical compounds should be judged as an adaptive response or an adverse effect. Thus, understanding of the toxicological characteristics of hepatocyte hypertrophy is of great importance to the safety evaluation of pesticides and other chemical compounds. To this end, we have constructed a database of potentially toxic pesticides. Using risk assessment reports of pesticides that are publicly available from the Food Safety Commission of Japan, we extracted all observations/findings that were based on 90-day subacute toxicity tests and 2-year chronic toxicity and carcinogenicity tests in rats. Analysis of the database revealed that hepatocyte hypertrophy was observed for 37-47% of the pesticides investigated (varying depending on sex and testing period), and that centrilobular hepatocyte hypertrophy was the most frequent among the various types of hepatocyte hypertrophy in both the 90-day and 2-year studies. The database constructed in this study enables us to investigate the relationships between hepatocyte hypertrophy and other toxicological observations/findings, and thus will be useful for characterizing hepatocyte hypertrophy.

The Impact of Coworkers’ Safety Violations on an Individual Worker: A Social Contagion Effect within the Construction Crew

PubMed Central

Zhang, Shoujian; Su, Yikun

2018-01-01

This research developed and tested a model of the social contagion effect of coworkers’ safety violations on individual workers within construction crews. Both situational and routine safety violations were considered in this model. Empirical data were collected from 345 construction workers in China using a detailed questionnaire. The results showed that both types of safety violations made by coworkers were significantly related to individuals’ perceived social support and production pressure. Individuals’ attitudinal ambivalence toward safety compliance mediated the relationships between perceived social support and production pressure and both types of individuals’ safety violations. However, safety motivation only mediated the effects of perceived social support and production pressure on individuals’ situational safety violations. Further, this research supported the differences between situational and routine safety violations. Specifically, we found that individuals were more likely to imitate coworkers’ routine safety violations than their situational safety violations. Coworkers’ situational safety violations had an indirect effect on individuals’ situational safety violations mainly through perceived social support and safety motivation. By contrast, coworkers’ routine safety violations had an indirect effect on individuals’ routine safety violations mainly through perceived production pressure and attitudinal ambivalence. Finally, the theoretical and practical implications, research limitations, and future directions were discussed. PMID:29673149

The Impact of Coworkers' Safety Violations on an Individual Worker: A Social Contagion Effect within the Construction Crew.

PubMed

Liang, Huakang; Lin, Ken-Yu; Zhang, Shoujian; Su, Yikun

2018-04-17

This research developed and tested a model of the social contagion effect of coworkers’ safety violations on individual workers within construction crews. Both situational and routine safety violations were considered in this model. Empirical data were collected from 345 construction workers in China using a detailed questionnaire. The results showed that both types of safety violations made by coworkers were significantly related to individuals’ perceived social support and production pressure. Individuals’ attitudinal ambivalence toward safety compliance mediated the relationships between perceived social support and production pressure and both types of individuals’ safety violations. However, safety motivation only mediated the effects of perceived social support and production pressure on individuals’ situational safety violations. Further, this research supported the differences between situational and routine safety violations. Specifically, we found that individuals were more likely to imitate coworkers’ routine safety violations than their situational safety violations. Coworkers’ situational safety violations had an indirect effect on individuals’ situational safety violations mainly through perceived social support and safety motivation. By contrast, coworkers’ routine safety violations had an indirect effect on individuals’ routine safety violations mainly through perceived production pressure and attitudinal ambivalence. Finally, the theoretical and practical implications, research limitations, and future directions were discussed.

[Intervention methodology for training and information for workers of the building sector].

PubMed

Pedron, F; Zanin, T; Ferrante, D; Fania, E

2006-01-01

Regarding the seriousness of work-accident in Gorizia district, various organizations as ASL 2 "Isontina" (local health agency), INAIL of Friuli Venezia Giulia (National Institute for occupational accident insurance), trade unions and trade associations created a organization called "Observatory for Working-accidents and Professional Illness Prevention". The aim of this association is the promotion of safety in working environment. Diffusing importance of safety in building trade was the first projects of Observatory. So, Observatory carried an initiative to make more aware the workers. Than, it organized training courses for building workers. Moreover, the construction of an informative pamphlet on risks in building trade was made. For some experimental investigation, Observatory works with Department of Psychology, University of Trieste.

Physical and numerical modeling of hydrophysical proceses on the site of underwater pipelines

NASA Astrophysics Data System (ADS)

Garmakova, M. E.; Degtyarev, V. V.; Fedorova, N. N.; Shlychkov, V. A.

2018-03-01

The paper outlines issues related to ensuring the exploitation safety of underwater pipelines that are at risk of accidents. The performed research is based on physical and mathematical modeling of local bottom erosion in the area of pipeline location. The experimental studies were performed on the basis of the Hydraulics Laboratory of the Department of Hydraulic Engineering Construction, Safety and Ecology of NSUACE (Sibstrin). In the course of physical experiments it was revealed that the intensity of the bottom soil reforming depends on the deepening of the pipeline. The ANSYS software has been used for numerical modeling. The process of erosion of the sandy bottom was modeled under the pipeline. Comparison of computational results at various mass flow rates was made.

Application of the Life Safety Code to a Historic Test Stand

NASA Technical Reports Server (NTRS)

Askins, Bruce; Lemke, Paul R.; Lewis, William L.; Covell, Carol C.

2011-01-01

NASA has conducted a study to assess alternatives to refurbishing existing launch vehicle modal test facilities as opposed to developing new test facilities to meet the demands of a very fiscally constrained test and evaluation environment. The results of this study showed that Marshall Space Flight Center (MSFC) Test Stand (TS) 4550 could be made compliant, within reasonable cost and schedule impacts, if safety processes and operational limitations were put in place to meet the safety codes and concerns of the Fire Marshall. Trades were performed with key selection criteria to ensure that appropriate levels of occupant safety are incorporated into test facility design modifications. In preparation for the ground vibration tests that were to be performed on the Ares I launch vehicle, the Ares Flight and Integrated Test Office (FITO) organization evaluated the available test facility options, which included the existing mothballed structural dynamic TS4550 used by Apollo and Shuttle, alternative ground vibration test facilities at other locations, and construction of a new dynamic test stand. After an exhaustive assessment of the alternatives, the results favored modifying the TS4550 because it was the lowest cost option and presented the least schedule risk to the NASA Constellation Program for Ares Integrated Vehicle Ground Vibration Test (IVGVT). As the renovation design plans and drawings were being developed for TS4550, a safety concern was discovered the original design for the construction of the test stand, originally built for the Apollo Program and renovated for the Shuttle Program, was completed before NASA s adoption of the currently imposed safety and building codes per National Fire Protection Association Life Safety Code [NFPA 101] and International Building Codes. The initial FITO assessment of the design changes, required to make TS4550 compliant with current safety and building standards, identified a significant cost increase and schedule impact. An effort was launched to thoroughly evaluate the applicable life safety requirements, examine the context in which they were derived, and determine a means by which the TS4550 modifications could be made within budget and on schedule, while still providing the occupants with appropriate levels of safety.

Safety Challenges and Improvement Strategies of Ethnic Minority Construction Workers: A Case Study in Hong Kong.

PubMed

Wu, Chunlin; Luo, Xiaowei; Wang, Tao; Wang, Yue; Sapkota, Bibek

2018-04-18

Due to cultural differences, ethnic minority construction workers are more difficult to manage and more vulnerable to accidents. This study aims to identify the major barriers faced by ethnic minority workers from their own perspectives and determine potential strategies to enhance safety climate of construction projects, thus ultimately improve their safety performance. A survey with modified Nordic safety climate questionnaire was conducted in a certain sub-contractor in Hong Kong. In-depth interviews, status quo description, major challenge investigation and safety knowledge tests were carried as well. The top three most important safety challenges identified are improper stereotypes from the whole industry, lack of opportunities for job assignment, and language barriers. To improve the safety performance, employers should allocate sufficient personal protective equipment and governments should organize unannounced site visits more frequently. Besides, the higher-level management should avoid giving contradictory instructions to foremen against to the standards of supervisors.

Effect of Occupational Health and Safety Management System on Work-Related Accident Rate and Differences of Occupational Health and Safety Management System Awareness between Managers in South Korea's Construction Industry

PubMed Central

Yoon, Seok J.; Lin, Hsing K.; Chen, Gang; Yi, Shinjea; Choi, Jeawook; Rui, Zhenhua

2013-01-01

Background The study was conducted to investigate the current status of the occupational health and safety management system (OHSMS) in the construction industry and the effect of OHSMS on accident rates. Differences of awareness levels on safety issues among site general managers and occupational health and safety (OHS) managers are identified through surveys. Methods The accident rates for the OHSMS-certified construction companies from 2006 to 2011, when the construction OHSMS became widely available, were analyzed to understand the effect of OHSMS on the work-related injury rates in the construction industry. The Korea Occupational Safety and Health Agency 18001 is the certification to these companies performing OHSMS in South Korea. The questionnaire was created to analyze the differences of OHSMS awareness between site general managers and OHS managers of construction companies. Results The implementation of OHSMS among the top 100 construction companies in South Korea shows that the accident rate decreased by 67% and the fatal accident rate decreased by 10.3% during the period from 2006 to 2011. The survey in this study shows different OHSMS awareness levels between site general managers and OHS managers. The differences were motivation for developing OHSMS, external support needed for implementing OHSMS, problems and effectiveness of implementing OHSMS. Conclusion Both work-related accident and fatal accident rates were found to be significantly reduced by implementing OHSMS in this study. The differences of OHSMS awareness between site general managers and OHS managers were identified through a survey. The effect of these differences on safety and other benefits warrants further research with proper data collection. PMID:24422176

Effect of Occupational Health and Safety Management System on Work-Related Accident Rate and Differences of Occupational Health and Safety Management System Awareness between Managers in South Korea's Construction Industry.

PubMed

Yoon, Seok J; Lin, Hsing K; Chen, Gang; Yi, Shinjea; Choi, Jeawook; Rui, Zhenhua

2013-12-01

The study was conducted to investigate the current status of the occupational health and safety management system (OHSMS) in the construction industry and the effect of OHSMS on accident rates. Differences of awareness levels on safety issues among site general managers and occupational health and safety (OHS) managers are identified through surveys. The accident rates for the OHSMS-certified construction companies from 2006 to 2011, when the construction OHSMS became widely available, were analyzed to understand the effect of OHSMS on the work-related injury rates in the construction industry. The Korea Occupational Safety and Health Agency 18001 is the certification to these companies performing OHSMS in South Korea. The questionnaire was created to analyze the differences of OHSMS awareness between site general managers and OHS managers of construction companies. The implementation of OHSMS among the top 100 construction companies in South Korea shows that the accident rate decreased by 67% and the fatal accident rate decreased by 10.3% during the period from 2006 to 2011. The survey in this study shows different OHSMS awareness levels between site general managers and OHS managers. The differences were motivation for developing OHSMS, external support needed for implementing OHSMS, problems and effectiveness of implementing OHSMS. Both work-related accident and fatal accident rates were found to be significantly reduced by implementing OHSMS in this study. The differences of OHSMS awareness between site general managers and OHS managers were identified through a survey. The effect of these differences on safety and other benefits warrants further research with proper data collection.

The importance of cleanliness in a proper construction site management in malaysia: a contractor’s perspective

NASA Astrophysics Data System (ADS)

Shazwan, M. A.; Quintin, J. V.; Osman, N. A.; Suhaida, S. K.; Ma'arof, M. I. N.

2017-11-01

Construction site’s cleanliness and tidiness is one of top main concerns of construction site management. A good site management with adequate planning in regards to housekeeping will ensure safety to both the site’s working personnel and the neighbouring environment. This is especially of priority today due to the rapid growth of construction projects in Malaysia. Nevertheless, to date, statistics had shown that housekeeping related accidents happened repeatedly despite the awareness on site’s cleanliness and tidiness. The objective of this study was to explore constructor’s perspective on site cleanliness and tidiness. A set of questionnaire was distributed to thirty-four (34) Grade 7 CIDB contractors’ firms in Petaling Jaya. Petaling Jaya was chosen since this area are developed area covered with residential area and cleaning management an importance issues. The goals of the survey study were to identify the following items from the perception of the contractors: (i) the hierarchy of importance of several purposes in ensuring construction site’s cleanliness and tidiness, and (ii) the risk factors that influence a construction site’s level of cleanliness and tidiness. It was found that from the contractor’s perspective, ensuring a site cleanliness and tidiness is of importance mainly due to the need in protecting the environment, whilst, the least in cost saving. In addition, poor personnel’s working attitude was found to be the main risk factor that will influences a construction site’s level of cleanliness and tidiness. Conclusively, construction site’s cleanliness and tidiness is highly vital. Even so, for nationwide awareness on the topic matter will requires full cooperation from all related parties.

29 CFR 1912.3 - Advisory Committee on Construction Safety and Health.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Advisory Committee on Construction Safety and Health. 1912.3 Section 1912.3 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) ADVISORY COMMITTEES ON STANDARDS Organizational Matters § 1912.3...

29 CFR 1912.3 - Advisory Committee on Construction Safety and Health.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 7 2011-07-01 2011-07-01 false Advisory Committee on Construction Safety and Health. 1912.3 Section 1912.3 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) ADVISORY COMMITTEES ON STANDARDS Organizational Matters § 1912.3...

29 CFR 1926.33 - Access to employee exposure and medical records.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Section 1926.33 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION General Safety and... applicable to construction work under this section are identical to those set forth at § 1910.1020 of this...

Army Corps of Engineers: Actions Needed to Improve Cost Sharing for Dam Safety Repairs

DTIC Science & Technology

2015-12-01

at 15 percent when modifications result from new hydrologic or seismic data, or changes in state-of-the-art design or construction criteria deemed...due to changes in state-of-the-art design or construction criteria (state-of-the-art provision)—since the enactment of the enabling legislation in...safety repair projects funded for design or construction from fiscal year 20076 to fiscal year 2016, we analyzed Corps dam safety documents and

Comparison of the Effectiveness and Safety of Apixaban, Dabigatran, Rivaroxaban, and Warfarin in Newly Diagnosed Atrial Fibrillation.

PubMed

Hernandez, Inmaculada; Zhang, Yuting; Saba, Samir

2017-11-15

No studies have performed direct pairwise comparisons of the effectiveness and safety of warfarin and the new oral anticoagulants (NOACs) apixaban, dabigatran, and rivaroxaban. Using 2013 to 2014 claims from a 5% random sample of Medicare beneficiaries, we identified patients newly diagnosed with atrial fibrillation who initiated apixaban, dabigatran, rivaroxaban, warfarin, or no oral anticoagulation therapy in 2013 to 2014. Outcomes included the composite of ischemic stroke, systemic embolism (SE) and death, any bleeding event, gastrointestinal bleeding, intracranial bleeding, and treatment persistence. We constructed Cox proportional hazard models to compare outcomes between each pair of treatment groups. The composite risk of ischemic stroke, SE, and death was lower for NOACs than for warfarin: hazard ratio (HR) 0.86, 95% confidence interval (CI) 0.76 to 0.98 for apixaban; 0.73, 95% CI 0.63 to 0.86 for dabigatran; and 0.82, 95% CI 0.75 to 0.89 for rivaroxaban, all compared with warfarin. There were no differences in effectiveness across NOACs. The risk of any bleeding was lower with apixaban than with warfarin, but higher with rivaroxaban than with warfarin. Apixaban (HR 0.69, 95% CI 0.60 to 0.79) and dabigatran (HR 0.79, 95% CI 0.69 to 0.92) were associated with lower bleeding risk than rivaroxaban. Treatment persistence was highest for apixaban (82%), and lowest for dabigatran and warfarin (64%) (p value <0.001). Compared with warfarin, NOACs are more effective in preventing stroke but their risk of bleeding varies, with rivaroxaban having higher risk than warfarin. Altogether, apixaban had the most favorable effectiveness, safety, and persistence profile. Copyright © 2017 Elsevier Inc. All rights reserved.

Pharmacology-based toxicity assessment: towards quantitative risk prediction in humans.

PubMed

Sahota, Tarjinder; Danhof, Meindert; Della Pasqua, Oscar

2016-05-01

Despite ongoing efforts to better understand the mechanisms underlying safety and toxicity, ~30% of the attrition in drug discovery and development is still due to safety concerns. Changes in current practice regarding the assessment of safety and toxicity are required to reduce late stage attrition and enable effective development of novel medicines. This review focuses on the implications of empirical evidence generation for the evaluation of safety and toxicity during drug development. A shift in paradigm is needed to (i) ensure that pharmacological concepts are incorporated into the evaluation of safety and toxicity; (ii) facilitate the integration of historical evidence and thereby the translation of findings across species as well as between in vitro and in vivo experiments and (iii) promote the use of experimental protocols tailored to address specific safety and toxicity questions. Based on historical examples, we highlight the challenges for the early characterisation of the safety profile of a new molecule and discuss how model-based methodologies can be applied for the design and analysis of experimental protocols. Issues relative to the scientific rationale are categorised and presented as a hierarchical tree describing the decision-making process. Focus is given to four different areas, namely, optimisation, translation, analytical construct and decision criteria. From a methodological perspective, the relevance of quantitative methods for estimation and extrapolation of risk from toxicology and safety pharmacology experimental protocols, such as points of departure and potency, is discussed in light of advancements in population and Bayesian modelling techniques (e.g. non-linear mixed effects modelling). Their use in the evaluation of pharmacokinetics (PK) and pharmacokinetic-pharmacodynamic relationships (PKPD) has enabled great insight into the dose rationale for medicines in humans, both in terms of efficacy and adverse events. Comparable benefits can be anticipated for the assessment of safety and toxicity profile of novel molecules. © The Author 2016. Published by Oxford University Press on behalf of the UK Environmental Mutagen Society. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Contractor-, steward-, and coworker-safety practice: associations with musculoskeletal pain and injury-related absence among construction apprentices

PubMed Central

Dutra, Lauren M.; Okechukwu, Cassandra A.

2013-01-01

Objectives This paper sought to assess organizational safety practices at three different levels of hierarchical workplace structure and to examine their association with injury outcomes among construction apprentices. Methods Using a cross-sectional sample of 1,775 construction apprentices, three measures of organizational safety practice were assessed: contractor-, steward-, and coworker-safety practice. Each safety practice measure was assessed using three similar questions (i.e., on-the-job safety commitment, following required or recommended safe work practices, and correcting unsafe work practices); the summed average of the responses ranged from 1 to 4, with a higher score indicating poorer safety practice. Outcome variables included the prevalence of four types of musculoskeletal pain (i.e., neck, shoulder, hand, and back pain) and injury-related absence. Results In adjusted analyses, contractor-safety practice was associated with both hand pain (OR: 1.27, 95 % CI: 1.04, 1.54) and back pain (OR: 1.40, 95 % CI: 1.17, 1.68); coworker-safety practice was related to back pain (OR: 1.42, 95 % CI: 1.18, 1.71) and injury-related absence (OR: 1.36, 95 % CI: 1.11, 1.67). In an analysis that included all three safety practice measures simultaneously, the association between coworker-safety practice and injury-related absence remained significant (OR: 1.68, 95 % CI: 1.20, 2.37), whereas all other associations became non-significant. Conclusions This study suggests that organizational safety practice, particularly coworker-safety practice, is associated with injury outcomes among construction apprentices. PMID:23748366

[Medication error management climate and perception for system use according to construction of medication error prevention system].

PubMed

Kim, Myoung Soo

2012-08-01

The purpose of this cross-sectional study was to examine current status of IT-based medication error prevention system construction and the relationships among system construction, medication error management climate and perception for system use. The participants were 124 patient safety chief managers working for 124 hospitals with over 300 beds in Korea. The characteristics of the participants, construction status and perception of systems (electric pharmacopoeia, electric drug dosage calculation system, computer-based patient safety reporting and bar-code system) and medication error management climate were measured in this study. The data were collected between June and August 2011. Descriptive statistics, partial Pearson correlation and MANCOVA were used for data analysis. Electric pharmacopoeia were constructed in 67.7% of participating hospitals, computer-based patient safety reporting systems were constructed in 50.8%, electric drug dosage calculation systems were in use in 32.3%. Bar-code systems showed up the lowest construction rate at 16.1% of Korean hospitals. Higher rates of construction of IT-based medication error prevention systems resulted in greater safety and a more positive error management climate prevailed. The supportive strategies for improving perception for use of IT-based systems would add to system construction, and positive error management climate would be more easily promoted.

Risk Decision Making Model for Reservoir Floodwater resources Utilization

NASA Astrophysics Data System (ADS)

Huang, X.

2017-12-01

Floodwater resources utilization(FRU) can alleviate the shortage of water resources, but there are risks. In order to safely and efficiently utilize the floodwater resources, it is necessary to study the risk of reservoir FRU. In this paper, the risk rate of exceeding the design flood water level and the risk rate of exceeding safety discharge are estimated. Based on the principle of the minimum risk and the maximum benefit of FRU, a multi-objective risk decision making model for FRU is constructed. Probability theory and mathematical statistics method is selected to calculate the risk rate; C-D production function method and emergy analysis method is selected to calculate the risk benefit; the risk loss is related to flood inundation area and unit area loss; the multi-objective decision making problem of the model is solved by the constraint method. Taking the Shilianghe reservoir in Jiangsu Province as an example, the optimal equilibrium solution of FRU of the Shilianghe reservoir is found by using the risk decision making model, and the validity and applicability of the model are verified.

San Jose Unified School District Health & Safety Guide for Facilities and Construction.

ERIC Educational Resources Information Center

2001

This guide from the San Jose Unified School District describes recommended procedures to promote and maintain a healthy and safe school environment during maintenance, modernization, or construction. Guidelines are presented in the following areas: (1) construction safety; (2) communication; (3) material selection; (4) heating, ventilation, and…

Risk factors affecting the severity of traffic accidents at Shanghai river-crossing tunnel.

PubMed

Lu, Jian John; Xing, Yingying; Wang, Chen; Cai, Xiaonan

2016-01-01

With increasing traffic volume and urban development, increasing numbers of underground tunnels have been constructed to relieve conflict between strained land and heavy traffic. However, as more long tunnels are constructed, tunnel traffic safety is becoming increasingly serious. Thus, it is necessary to acquire their implications and impacts. This study examined 4,539 traffic accidents that have occurred in 14 Shanghai river-crossing tunnels for the period 2011-2012 and analyze the correlation between potential factors and accident injury severity. An ordered logit model was developed to examine the correlation between potential factors and accident injury severity. Results show that increased injury severity is associated with male drivers, drivers aged 65 years or older, accident time from midnight to dawn, weekends, wet road surface, goods vehicles, 3 or more vehicles, 4 or more lanes, middle speed limits (50-79 km/h), zone 3, extra-long tunnels (over 3,000 m), and maximum longitudinal gradient. This article aims to provide useful information for engineers to develop interventions and countermeasures to improve tunnel safety in China.

The increase in prescriptions of bisphosphonates and the incidence proportion of osteonecrosis of the jaw after risk communication activities in Japan: a hospital-based cohort study†

PubMed Central

Sumi, Eriko; Yamazaki, Toru; Tanaka, Shiro; Yamamoto, Keiichi; Nakayama, Takeo; Bessho, Kazuhisa; Yokode, Masayuki

2014-01-01

Purpose The purpose of this study was to investigate the impact of risk communication about bisphosphonate (BP)-related osteonecrosis of the jaw (ONJ) on the number of reported cases to the Drug Adverse Reactions Reporting System and on the incidence proportion of ONJ in a hospital-based cohort study in Japan. Method We conducted a survey of the safety information on BP-related ONJ available from regulatory authorities, pharmaceutical manufacturers and academic associations. We also performed a trend analysis of a dataset from the Drug Adverse Reactions Reporting System and a sub-analysis, using previously constructed data from a retrospective cohort study. Results Risk communication from pharmaceutical manufacturers and academic associations began within 1 year after revisions were made to the package inserts, in October 2006. Twenty times more cases of ONJ have been reported to regulatory authority since 2007, compared with the period before 2007. In our cohort, the incidence proportion of ONJ during and after 2009 was four times greater than before 2009. During this period, BPs were frequently prescribed, whereas there was no increase in the use of alternative agents, such as selective estrogen receptor modulators. Conclusion ONJ was increasingly diagnosed after risk communication efforts, but the impact of the communications was not clear. Safety notifications were diligently disseminated after the package insert was revised. However, there was no surveillance for ONJ before the revision. © 2014 The Authors. Pharmacoepidemiology and Drug Safety published by John Wiley & Sons, Ltd. PMID:24399628

Behavior-based safety on construction sites: a case study.

PubMed

Choudhry, Rafiq M

2014-09-01

This work presents the results of a case study and describes an important area within the field of construction safety management, namely behavior-based safety (BBS). This paper adopts and develops a management approach for safety improvements in construction site environments. A rigorous behavioral safety system and its intervention program was implemented and deployed on target construction sites. After taking a few weeks of safety behavior measurements, the project management team implemented the designed intervention and measurements were taken. Goal-setting sessions were arranged on-site with workers' participation to set realistic and attainable targets of performance. Safety performance measurements continued and the levels of performance and the targets were presented on feedback charts. Supervisors were asked to give workers recognition and praise when they acted safely or improved critical behaviors. Observers were requested to have discussions with workers, visit the site, distribute training materials to workers, and provide feedback to crews and display charts. They were required to talk to operatives in the presence of line managers. It was necessary to develop awareness and understanding of what was being measured. In the process, operatives learned how to act safely when conducting site tasks using the designed checklists. Current weekly scores were discussed in the weekly safety meetings and other operational site meetings with emphasis on how to achieve set targets. The reliability of the safety performance measures taken by the company's observers was monitored. A clear increase in safety performance level was achieved across all categories: personal protective equipment; housekeeping; access to heights; plant and equipment, and scaffolding. The research reveals that scores of safety performance at one project improved from 86% (at the end of 3rd week) to 92.9% during the 9th week. The results of intervention demonstrated large decreases in unsafe behaviors and significant increases in safe behaviors. The results of this case study showed that an approach based on goal setting, feedback, and an effective measure of safety behavior if properly applied by committed management, can improve safety performance significantly in construction site environments. The results proved that the BBS management technique can be applied to any country's culture, showing that it would be a good approach for improving the safety of front-line workers and that it has industry wide application for ongoing construction projects. Copyright © 2014 Elsevier Ltd. All rights reserved.

The Impact of a Suicide Prevention Strategy on Reducing the Economic Cost of Suicide in the New South Wales Construction Industry

PubMed Central

2015-01-01

Abstract. Background: Little research has been conducted into the cost and prevention of self-harm in the workplace. Aims: To quantify the economic cost of self-harm and suicide among New South Wales (NSW) construction industry (CI) workers and to examine the potential economic impact of implementing Mates in Construction (MIC). Method: Direct and indirect costs were estimated. Effectiveness was measured using the relative risk ratio (RRR). In Queensland (QLD), relative suicide risks were estimated for 5-year periods before and after the commencement of MIC. For NSW, the difference between the expected (i.e., using NSW pre-MIC [2008–2012] suicide risk) and counterfactual suicide cases (i.e., applying QLD RRR) provided an estimate of potential suicide cases averted in the post-MIC period (2013–2017). Results were adjusted using the average uptake (i.e., 9.4%) of MIC activities in QLD. Economic savings from averted cases were compared with the cost of implementing MIC. Results: The cost of self-harm and suicide in the NSW CI was AU $527 million in 2010. MIC could potentially avert 0.4 suicides, 1.01 full incapacity cases, and 4.92 short absences, generating annual savings of AU $3.66 million. For every AU $1 invested, the economic return is approximately AU $4.6. Conclusion: MIC represents a positive economic investment in workplace safety. PMID:26695869

The Impact of a Suicide Prevention Strategy on Reducing the Economic Cost of Suicide in the New South Wales Construction Industry.

PubMed

Doran, Christopher M; Ling, Rod; Gullestrup, Jorgen; Swannell, Sarah; Milner, Allison

2016-03-01

Little research has been conducted into the cost and prevention of self-harm in the workplace. To quantify the economic cost of self-harm and suicide among New South Wales (NSW) construction industry (CI) workers and to examine the potential economic impact of implementing Mates in Construction (MIC). Direct and indirect costs were estimated. Effectiveness was measured using the relative risk ratio (RRR). In Queensland (QLD), relative suicide risks were estimated for 5-year periods before and after the commencement of MIC. For NSW, the difference between the expected (i.e., using NSW pre-MIC [2008-2012] suicide risk) and counterfactual suicide cases (i.e., applying QLD RRR) provided an estimate of potential suicide cases averted in the post-MIC period (2013-2017). Results were adjusted using the average uptake (i.e., 9.4%) of MIC activities in QLD. Economic savings from averted cases were compared with the cost of implementing MIC. The cost of self-harm and suicide in the NSW CI was AU $527 million in 2010. MIC could potentially avert 0.4 suicides, 1.01 full incapacity cases, and 4.92 short absences, generating annual savings of AU $3.66 million. For every AU $1 invested, the economic return is approximately AU $4.6. MIC represents a positive economic investment in workplace safety.

Integration of Occupational Safety to Contractors` or Subcontractors` Performance Evaluation in Construction Projects

NASA Astrophysics Data System (ADS)

Kozlovská, Mária; Struková, Zuzana

2013-06-01

Several factors should be considered by the owner and general contractor in the process of contractors` and subcontractors` selection and evaluation. The paper reviews the recent models addressed to guide general contractors in subcontractors' selection process and in evaluation of different contractors during the execution of the project. Moreover the paper suggests the impact of different contractors' performance to the overall level of occupational health and safety culture at the sites. It deals with the factors influencing the safety performance of contractors during construction and analyses the methods for assessing the safety performance of construction contractors. The results of contractors' safety performance evaluation could be a useful tool in motivating contractors to achieve better safety outcomes or could have effect on owners` or general contractors' decision making about contractors suitability for future contracting works.

Probabilistic assessment of roadway departure risk in a curve

NASA Astrophysics Data System (ADS)

Rey, G.; Clair, D.; Fogli, M.; Bernardin, F.

2011-10-01

Roadway departure while cornering constitutes a major part of car accidents and casualties in France. Even though drastic policy about overspeeding contributes to reduce accidents, there obviously exist other factors. This article presents the construction of a probabilistic strategy for the roadway departure risk assessment. A specific vehicle dynamic model is developed in which some parameters are modelled by random variables. These parameters are deduced from a sensitivity analysis to ensure an efficient representation of the inherent uncertainties of the system. Then, structural reliability methods are employed to assess the roadway departure risk in function of the initial conditions measured at the entrance of the curve. This study is conducted within the French national road safety project SARI that aims to implement a warning systems alerting the driver in case of dangerous situation.

46 CFR 177.1010 - Safety glazing materials.

Code of Federal Regulations, 2010 CFR

2010-10-01

... TONS) CONSTRUCTION AND ARRANGEMENT Window Construction and Visibility § 177.1010 Safety glazing materials. Glass and other glazing material used in windows accessible to passengers and crew must be of...

Study on the evaluation index of active power reserve

NASA Astrophysics Data System (ADS)

Guo, Xiaorui; Liu, Jiantao; Wang, Ke; Min, Lu

2018-01-01

Based on the role of active reserve at different time scales, divides the evaluation dimension of active reserve. Analysis the calculation principle of traditional reliability index such as probability of system safety, lack of power shortage and electricity shortage expectancy, and studies the applicability of these indicators to evaluate the reserve capacity on different dimensions. Resolves the evaluation index of active reserve capacity from the dimensions of time dimension, spatial dimension, system state, risk degree and economy, then construct evaluation index of active reserve capacity.

[Trampoline injuries in children].

PubMed

Sinikumpu, Juha-Jaakko; Antila, Eeva; Korhonen, Jussi; Rättyä, Johanna; Serlo, Willy

2012-01-01

Trampolines for home use have become common in Finland during the past ten years, being especially favored by children. Trampoline jumping is beneficial and constructive physical exercise, but poses a significant risk for injuries. The most common injuries include sprains and strains. During summertime, trampoline injuries account for as many as 13% of children's accidents requiring hospital care. Fractures are by far the most common trampoline injuries requiring hospital care. Injuries can be prevented by using safety nets. Only one child at a time is allowed to jump on the trampoline.

Fatal accidents in nighttime vs. daytime highway construction work zones.

PubMed

Arditi, David; Lee, Dong-Eun; Polat, Gul

2007-01-01

Awareness about worker safety in nighttime construction has been a major concern because it is believed that nighttime construction creates hazardous work conditions. However, only a few studies provide valuable comparative information about accident characteristics of nighttime and daytime highway construction activities. This study investigates fatal accidents that occurred in Illinois highway work zones in the period 1996-2001 in order to determine the safety differences between nighttime and daytime highway construction. The lighting and weather conditions were included into the study as control parameters to see their effects on the frequency of fatal accidents occurring in work zones. According to this study, there is evidence that nighttime construction is more hazardous than daytime construction. The inclusion of a weather parameter into the analysis has limited effect on this finding. The study justifies establishing an efficient work zone accident reporting system and taking all necessary measures to enhance safety in nighttime work zones.

The effect of safety initiatives on safety performance: a longitudinal study.

PubMed

Hoonakker, Peter; Loushine, Todd; Carayon, Pascale; Kallman, James; Kapp, Andrew; Smith, Michael J

2005-07-01

Construction industry is one of the most dangerous industries, not only in the USA, but worldwide. In this longitudinal study we examined the effects of safety initiatives on the safety performance of construction companies. One of the measures commonly used in the USA to track a company's safety performance is the experience modification rate (EMR). The EMR is based on the company's safety records (injury claims) from the past three full years and is used to calculate the workers' compensation insurance premiums. In a longitudinal study, we studied the effects of safety efforts and initiatives on the EMR. The results show that safety initiatives and money spent on safety do improve safety performance, but only over time.

Safety and health in the construction of fixed offshore installations in the petroleum industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1981-01-01

A meeting convened by the ILO (International Labor Office) on safety problems in the offshore petroleum industry recommended the preparation of a code of practice setting out standards for safety and health during the construction of fixed offshore installations. Such a code, to be prepared by the ILO in co-operation with other bodies, including the Inter-Governmental Maritime Consultative Organisation (IMCO), was to take into consideration existing standards applicable to offshore construction activities and to supplement the ILO codes of practice on safety and health in building and civil engineering work, shipbuilding and ship repairing. (Copyright (c) International Labour Organisation 1981.)

78 FR 11092 - Safety and Health Regulations for Construction

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-15

... LABOR DEPARTMENT Occupational Safety and Health Administration 29 CFR Part 1926 Safety and Health Regulations for Construction CFR Correction In Title 29 of the Code of Federal Regulations, Part 1926, revised as of July 1, 2012, on page 225, in Sec. 1926.152, paragraph (c)(16) is added to read as follows: Sec...

Interactive BIM-Enabled Safety Training Piloted in Construction Education

ERIC Educational Resources Information Center

Clevenger, Caroline; Lopez del Puerto, Carla; Glick, Scott

2015-01-01

This paper documents and assesses the development of a construction safety training module featuring interactive, BIM-enabled, 3D visualizations to test if such a tool can enhance safety training related to scaffolds. This research documents the technical challenges and the lessons learned through the development and administration of a prototype…

Operational Safety on Airports During Construction

DOT National Transportation Integrated Search

1984-05-31

This advisory circular (AC) sets forth guidelines concerning the operational : safety on airports during construction, to assist airport operators in complying : with Part 139, Certification and Operation: Land Airports Serving Certain Air : Carriers...

Risk factors for non-fatal occupational injuries among construction workers: A case-control study.

PubMed

Khashaba, E; El-Helaly, M; El-Gilany, A H; Motawei, S M; Foda, S

2018-02-01

Substance abuse is a serious problem, because it affects both workers and young people. Prevalence and consequences of cannabis abuse among construction workers in particular are not well studied in Egypt. To determine the association between non-fatal occupational injuries among construction workers and their demographic and occupational factors and to assess the frequency of cannabis abuse and its relationship to injury severity and workdays lost. A case-control study was conducted at Mansoura Emergency Hospital. Cases were 100 acutely injured male workers. A control group of 90 healthy age-matched workers was selected from 8 construction sites. Workers were interviewed, and a questionnaire was completed that included socio-demographic data, full occupational history, and causes and type of injury. Injury outcome measures included lost workdays and the injury severity score (ISS). Cannabis abuse in injured workers was monitored by preliminary testing of urine and confirmatory testing of blood. Logistic regression analysis revealed that the independent predictors of occupational injuries were rural residence, being a carpenter or painter and past history of injuries. The most common accidents were slipping falls (62%). Confirmed cannabis test was positive in 51.1% of the injured workers. Median days away from work were greater among cannabis users than non-users. The ISS was significantly higher among users compared to non-users ( p < 0.05). Cannabis abuse can increase injury severity and prolong workdays lost. Drug testing is recommended for at-risk construction workers with inadequate safety measures.

"The Dose Makes the Poison": Informing Consumers About the Scientific Risk Assessment of Food Additives.

PubMed

Bearth, Angela; Cousin, Marie-Eve; Siegrist, Michael

2016-01-01

Intensive risk assessment is required before the approval of food additives. During this process, based on the toxicological principle of "the dose makes the poison,ˮ maximum usage doses are assessed. However, most consumers are not aware of these efforts to ensure the safety of food additives and are therefore sceptical, even though food additives bring certain benefits to consumers. This study investigated the effect of a short video, which explains the scientific risk assessment and regulation of food additives, on consumers' perceptions and acceptance of food additives. The primary goal of this study was to inform consumers and enable them to construct their own risk-benefit assessment and make informed decisions about food additives. The secondary goal was to investigate whether people have different perceptions of food additives of artificial (i.e., aspartame) or natural origin (i.e., steviolglycoside). To attain these research goals, an online experiment was conducted on 185 Swiss consumers. Participants were randomly assigned to either the experimental group, which was shown a video about the scientific risk assessment of food additives, or the control group, which was shown a video about a topic irrelevant to the study. After watching the video, the respondents knew significantly more, expressed more positive thoughts and feelings, had less risk perception, and more acceptance than prior to watching the video. Thus, it appears that informing consumers about complex food safety topics, such as the scientific risk assessment of food additives, is possible, and using a carefully developed information video is a successful strategy for informing consumers. © 2015 Society for Risk Analysis.

Digging into construction: social networks and their potential impact on knowledge transfer.

PubMed

Carlan, N A; Kramer, D M; Bigelow, P; Wells, R; Garritano, E; Vi, P

2012-01-01

A six-year study is exploring the most effective ways to disseminate ideas to reduce musculoskeletal disorders (MSDs) in the construction sector. The sector was targeted because MSDs account for 35% of all lost time injuries. This paper reports on the organization of the construction sector, and maps potential pathways of communication, including social networks, to set the stage for future dissemination. The managers, health and safety specialists, union health and safety representatives, and 28 workers from small, medium and large construction companies participated. Over a three-year period, data were collected from 47 qualitative interviews. Questions were guided by the PARIHS (Promoting Action on Research Implementation in Health Services) knowledge-transfer conceptual framework and adapted for the construction sector. The construction sector is a complex and dynamic sector, with non-linear reporting relationships, and divided and diluted responsibilities. Four networks were identified that can potentially facilitate the dissemination of new knowledge: worksite-project networks; union networks; apprenticeship program networks; and networks established by the Construction Safety Association/Infrastructure Health and Safety Association. Flexible and multi-directional lines of communication must be used in this complex environment. This has implications for the future choice of knowledge transfer strategies.

Factors affecting unsafe behavior in construction projects: development and validation of a new questionnaire.

PubMed

Asilian-Mahabadi, Hassan; Khosravi, Yahya; Hassanzadeh-Rangi, Narmin; Hajizadeh, Ebrahim; Behzadan, Amir H

2018-02-05

Occupational safety in general, and construction safety in particular, is a complex phenomenon. This study was designed to develop a new valid measure to evaluate factors affecting unsafe behavior in the construction industry. A new questionnaire was generated from qualitative research according to the principles of grounded theory. Key measurement properties (face validity, content validity, construct validity, reliability and discriminative validity) were examined using qualitative and quantitative approaches. The receiver operating characteristic curve was used to estimate the discriminating power and the optimal cutoff score. Construct validity revealed an interpretable 12-factor structure which explained 61.87% of variance. Good internal consistency (Cronbach's α = 0.94) and stability (intra-class correlation coefficient = 0.93) were found for the new instrument. The area under the curve, sensitivity and specificity were 0.80, 0.80 and 0.75, respectively. The new instrument also discriminated safety performance among the construction sites with different workers' accident histories (F = 6.40, p < 0.05). The new instrument appears to be a valid, reliable and sensitive instrument that will contribute to investigating the root causes of workers' unsafe behaviors, thus promoting safety performance in the construction industry.

36 CFR 294.23 - Road construction and reconstruction in Idaho Roadless Areas.

Code of Federal Regulations, 2011 CFR

2011-07-01

... safety; (v) Road reconstruction is needed to implement a road safety improvement project on a road... 36 Parks, Forests, and Public Property 2 2011-07-01 2011-07-01 false Road construction and..., DEPARTMENT OF AGRICULTURE SPECIAL AREAS Idaho Roadless Area Management § 294.23 Road construction and...

42 CFR 137.368 - Is the Secretary responsible for oversight and compliance of health and safety codes during...

Code of Federal Regulations, 2010 CFR

2010-10-01

... compliance of health and safety codes during construction projects being performed by a Self-Governance Tribe... SERVICES TRIBAL SELF-GOVERNANCE Construction Roles of the Secretary in Establishing and Implementing Construction Project Agreements § 137.368 Is the Secretary responsible for oversight and compliance of health...

Job stress models for predicting burnout syndrome: a review.

PubMed

Chirico, Francesco

2016-01-01

In Europe, the Council Directive 89/391 for improvement of workers' safety and health has emphasized the importance of addressing all occupational risk factors, and hence also psychosocial and organizational risk factors. Nevertheless, the construct of "work-related stress" elaborated from EU-OSHA is not totally corresponding with the "psychosocial" risk, that is a broader category of risk, comprising various and different psychosocial risk factors. The term "burnout", without any binding definition, tries to integrate symptoms as well as cause of the burnout process. In Europe, the most important methods developed for the work related stress risk assessment are based on the Cox's transactional model of job stress. Nevertheless, there are more specific models for predicting burnout syndrome. This literature review provides an overview of job burnout, highlighting the most important models of job burnout, such as the Job Strain, the Effort/Reward Imbalance and the Job Demands-Resources models. The difference between these models and the Cox's model of job stress is explored.

Risk assessment associated to possible concrete degradation of a near surface disposal facility

NASA Astrophysics Data System (ADS)

Capra, B.; Billard, Y.; Wacquier, W.; Gens, R.

2013-07-01

This article outlines a risk analysis of possible concrete degradation performed in the framework of the preparation of the Safety Report of ONDRAF/NIRAS, the Belgian Agency for Radioactive Waste and Enriched Fissile Materials, for the construction and operation of a near surface disposal facility of category A waste - short-lived low and intermediate level waste - in Dessel. The main degradation mechanism considered is the carbonation of different concrete components over different periods (from the building phase up to 2000 years), which induces corrosion of the rebars. A dedicated methodology mixing risk analysis and numerical modeling of concrete carbonation has been developed to assess the critical risks of the disposal facility at different periods. According to the results obtained, risk mapping was used to assess the impact of carbonation of concrete on the different components at the different stages. The most important risk is related to an extreme situation with complete removal of the earth cover and side embankment.

Long-duration space exploration and emotional health: Recommendations for conceptualizing and evaluating risk

NASA Astrophysics Data System (ADS)

Alfano, Candice A.; Bower, Joanne L.; Cowie, Jennifer; Lau, Simon; Simpson, Richard J.

2018-01-01

Spaceflight to Mars will by far exceed the duration of any previous mission. Although behavioral health risks are routinely highlighted among the most serious threats to crew safety, understanding of specific emotional responses most likely to occur and interfere with mission success has lagged in comparison to other risk domains. Even within the domain of behavioral health, emotional constructs remain to be 'unpacked' to the same extent as other factors such as attention and fatigue. The current paper provides a review of previous studies that have examined emotional responses in isolated, confined, extreme environments (ICE) toward informing a needed research agenda. We include research conducted during space flight, long-duration space simulation analogs, and polar environments and utilize a well-established model of emotion and emotion regulation to conceptualize specific findings. Lastly, we propose four specific directions for future research: (1) use of a guiding theoretical framework for evaluating emotion responses in ICE environments; (2) leveraging multi-method approaches to improve the reliability of subjective reports of emotional health; (3) a priori selection of precise emotional constructs to guide measure selection; and (4) focusing on positive in addition to negative emotion in order to provide a more complete understanding of individual risk and resilience.

15 CFR 270.103 - Publication in the Federal Register.

Code of Federal Regulations, 2012 CFR

2012-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Establishment and Deployment of Teams § 270.103 Publication in the... of each Team. ...

15 CFR 270.103 - Publication in the Federal Register.

Code of Federal Regulations, 2011 CFR

2011-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Establishment and Deployment of Teams § 270.103 Publication in the... of each Team. ...

15 CFR 270.103 - Publication in the Federal Register.

Code of Federal Regulations, 2014 CFR

2014-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Establishment and Deployment of Teams § 270.103 Publication in the... of each Team. ...

15 CFR 270.103 - Publication in the Federal Register.

Code of Federal Regulations, 2010 CFR

2010-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Establishment and Deployment of Teams § 270.103 Publication in the... of each Team. ...

15 CFR 270.103 - Publication in the Federal Register.

Code of Federal Regulations, 2013 CFR

2013-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Establishment and Deployment of Teams § 270.103 Publication in the... of each Team. ...

A GIS-based approach for comparative analysis of potential fire risk assessment

NASA Astrophysics Data System (ADS)

Sun, Ying; Hu, Lieqiu; Liu, Huiping

2007-06-01

Urban fires are one of the most important sources of property loss and human casualty and therefore it is necessary to assess the potential fire risk with consideration of urban community safety. Two evaluation models are proposed, both of which are integrated with GIS. One is the single factor model concerning the accessibility of fire passage and the other is grey clustering approach based on the multifactor system. In the latter model, fourteen factors are introduced and divided into four categories involving security management, evacuation facility, construction resistance and fire fighting capability. A case study on campus of Beijing Normal University is presented to express the potential risk assessment models in details. A comparative analysis of the two models is carried out to validate the accuracy. The results are approximately consistent with each other. Moreover, modeling with GIS promotes the efficiency the potential risk assessment.

The European Association of Preventive Cardiology Exercise Prescription in Everyday Practice and Rehabilitative Training (EXPERT) tool: A digital training and decision support system for optimized exercise prescription in cardiovascular disease. Concept, definitions and construction methodology.

PubMed

Hansen, Dominique; Dendale, Paul; Coninx, Karin; Vanhees, Luc; Piepoli, Massimo F; Niebauer, Josef; Cornelissen, Veronique; Pedretti, Roberto; Geurts, Eva; Ruiz, Gustavo R; Corrà, Ugo; Schmid, Jean-Paul; Greco, Eugenio; Davos, Constantinos H; Edelmann, Frank; Abreu, Ana; Rauch, Bernhard; Ambrosetti, Marco; Braga, Simona S; Barna, Olga; Beckers, Paul; Bussotti, Maurizio; Fagard, Robert; Faggiano, Pompilio; Garcia-Porrero, Esteban; Kouidi, Evangelia; Lamotte, Michel; Neunhäuserer, Daniel; Reibis, Rona; Spruit, Martijn A; Stettler, Christoph; Takken, Tim; Tonoli, Cajsa; Vigorito, Carlo; Völler, Heinz; Doherty, Patrick

2017-07-01

Background Exercise rehabilitation is highly recommended by current guidelines on prevention of cardiovascular disease, but its implementation is still poor. Many clinicians experience difficulties in prescribing exercise in the presence of different concomitant cardiovascular diseases and risk factors within the same patient. It was aimed to develop a digital training and decision support system for exercise prescription in cardiovascular disease patients in clinical practice: the European Association of Preventive Cardiology Exercise Prescription in Everyday Practice and Rehabilitative Training (EXPERT) tool. Methods EXPERT working group members were requested to define (a) diagnostic criteria for specific cardiovascular diseases, cardiovascular disease risk factors, and other chronic non-cardiovascular conditions, (b) primary goals of exercise intervention, (c) disease-specific prescription of exercise training (intensity, frequency, volume, type, session and programme duration), and (d) exercise training safety advices. The impact of exercise tolerance, common cardiovascular medications and adverse events during exercise testing were further taken into account for optimized exercise prescription. Results Exercise training recommendations and safety advices were formulated for 10 cardiovascular diseases, five cardiovascular disease risk factors (type 1 and 2 diabetes, obesity, hypertension, hypercholesterolaemia), and three common chronic non-cardiovascular conditions (lung and renal failure and sarcopaenia), but also accounted for baseline exercise tolerance, common cardiovascular medications and occurrence of adverse events during exercise testing. An algorithm, supported by an interactive tool, was constructed based on these data. This training and decision support system automatically provides an exercise prescription according to the variables provided. Conclusion This digital training and decision support system may contribute in overcoming barriers in exercise implementation in common cardiovascular diseases.

Differences in safety training among smaller and larger construction firms with non-native workers: Evidence of overlapping vulnerabilities

PubMed Central

Guerin, Rebecca J.; Keller, Brenna M.; Flynn, Michael A.; Salgado, Cathy; Hudson, Dennis

2017-01-01

Collaborative efforts between the National Institute for Occupational Safety and Health (NIOSH) and the American Society of Safety Engineers (ASSE) led to a report focusing on overlapping occupational vulnerabilities, specifically small construction businesses employing young, non-native workers. Following the report, an online survey was conducted by ASSE with construction business representatives focusing on training experiences of non-native workers. Results were grouped by business size (50 or fewer employees or more than 50 employees). Smaller businesses were less likely to employ a supervisor who speaks the same language as immigrant workers (p < .001). Non-native workers in small businesses received fewer hours of both initial safety training (p = .005) and monthly ongoing safety training (p = .042). Immigrant workers in smaller businesses were less likely to receive every type of safety training identified in the survey (including pre-work safety orientation [p < .001], job-specific training [p < .001], OSHA 10-hour training [p = .001], and federal/state required training [p < .001]). The results highlight some of the challenges a vulnerable worker population faces in a small business, and can be used to better focus intervention efforts. Among businesses represented in this sample, there are deflcits in the amount, frequency, and format of workplace safety and health training provided to non-native workers in smaller construction businesses compared to those in larger businesses. The types of training conducted for non-native workers in small business were less likely to take into account the language and literacy issues faced by these workers. The findings suggest the need for a targeted approach in providing occupational safety and health training to non-native workers employed by smaller construction businesses. PMID:29375194

Beyond the classroom: a case study of immigrant safety liaisons in residential construction.

PubMed

Ochsner, Michele; Marshall, Elizabeth G; Martino, Carmen; Pabelón, Marién Casillas; Kimmel, Louis; Rostran, Damaris

2012-01-01

Latino day laborers often work at dangerous construction sites with little power to change conditions. We describe the development, implementation, and early-stage results of a program to train immigrant day laborers as safety liaisons. These are construction workers prepared to recognize and respond to health and safety hazards. Based in Newark, NJ, the project involves collaboration between New Labor, a membership-based worker center, and university researchers and labor educators. Safety liaisons undergo training and receive ongoing support for their roles. Both qualitative and quantitative data are collected to monitor progress. Although lacking in formal authority, safety liaisons have prompted improvements at specific sites, filed OSHA complaints, and developed a local worker council. Participatory training methods, opportunities for leadership outside the classroom, and participation in project planning have strengthened liaisons' effectiveness, leadership skills, and commitment. The safety liaison approach could be adapted by worker centers and their partner organizations.

Study of Evaluation OSH Management System Policy Based On Safety Culture Dimensions in Construction Project

NASA Astrophysics Data System (ADS)

Latief, Yusuf; Armyn Machfudiyanto, Rossy; Arifuddin, Rosmariani; Mahendra Fira Setiawan, R.; Yogiswara, Yoko

2017-07-01

Safety Culture in the construction industry is very influential on the socio economic conditions that resulted in the country’s competitiveness. Based on the data, the accident rate of construction projects in Indonesia is very high. In the era of the Asian Economic Community (AEC) Indonesian contractor is required to improve competitiveness, one of which is the implementation of the project without zero accident. Research using primary and secondary data validated the results of the literature experts and questionnaire respondents were analyzed using methods SmartPLS, obtained pattern of relationships between dimensions of safety culture to improve the performance of Safety. The results showed that the behaviors and Cost of Safety into dimensions that significantly affect the performance of safety. an increase in visible policy-based on Regulation of Public Work and Housing No 5/PRT/M/2014 to improve to lower the accident rate.

Virtual reality simulation for construction safety promotion.

PubMed

Zhao, Dong; Lucas, Jason

2015-01-01

Safety is a critical issue for the construction industry. Literature argues that human error contributes to more than half of occupational incidents and could be directly impacted by effective training programs. This paper reviews the current safety training status in the US construction industry. Results from the review evidence the gap between the status and industry expectation on safety. To narrow this gap, this paper demonstrates the development and utilisation of a training program that is based on virtual reality (VR) simulation. The VR-based safety training program can offer a safe working environment where users can effectively rehearse tasks with electrical hazards and ultimately promote their abilities for electrical hazard cognition and intervention. Its visualisation and simulation can also remove the training barriers caused by electricity's features of invisibility and dangerousness.

Causes of electrical deaths and injuries among construction workers.

PubMed

McCann, Michael; Hunting, Katherine L; Murawski, Judith; Chowdhury, Risana; Welch, Laura

2003-04-01

Contact with electrical current is the fourth leading cause of deaths of construction workers. This study evaluates electrical deaths and injuries to construction workers. Two sources of data were analyzed in detail: (1) 1,019 electrical deaths identified by the Bureau of Labor Statistics, Census of Fatal Occupational Injuries (CFOI) for the years 1992-1998; and (2) 61 electrical injuries identified between November 1, 1990 and December 31, 1998 from a George Washington University Emergency Department injury surveillance database. Contact with "live" electrical wiring, equipment, and light fixtures was the main cause of electrical deaths and injuries among electrical workers, followed by contact with overhead power lines. Among non-electrical workers, contact with overhead power lines was the major cause of death. Other causes included contact with energized metal objects, machinery, power tools, and portable lights. Arc flash or blast caused 31% of electrical injuries among construction workers, but less than 2% of electrical deaths. Adoption of a lockout/tagout standard for construction, and training for non-electrical workers in basic electrical safety would reduce the risk of electrical deaths and injuries in construction. Further research is needed on ways to prevent electrical deaths and injuries while working "live". Copyright 2003 Wiley-Liss, Inc.

Use of oil shale ash in road construction: results of follow-up environmental monitoring.

PubMed

Reinik, Janek; Irha, Natalya; Koroljova, Arina; Meriste, Tõnis

2018-01-05

Oil shale ash (OSA) was used for road construction in a pristine swamp area in East-Estonia during 2013-2014. OSA was used as a binder both in mass stabilization of soft peat soil and in the upper layer. Use of OSA in civil engineering always raises questions about the environmental safety of such activities. Post-construction environmental monitoring of the pilot section was carried out in 2014 and 2015. The monitoring program involved surface water and soil sampling campaigns. Samples were analyzed for selected constituents and parameters of environmental concern. The paper gives data for assessing the environmental impact and evaluation of potential risks associated with construction of roads using OSA. Leaching of hazardous compounds from the pilot section to surrounding aqueous environment was not observed during the monitoring program. Still, the road construction affected the concentration of sulfates in surrounding surface water. Also, the water-soluble content of barium in surface water correlated significantly with the concentrations of chloride and sulfate ion and electric conductivity of the surface water. Therefore, it is recommended to monitor the electric conductivity, concentrations of sulfates, chlorides, and barium in nearby surface water when OSA is used in road construction.

Electrical fatalities among U.S. construction workers.

PubMed

Ore, T; Casini, V

1996-06-01

Over 2000 electrocution deaths were identified among U.S. construction workers from 1980 to 1991, with the highest mean annual crude mortality rate (2.5 per 100,000 people), and second highest mean age-adjusted rate (2.7 per 100,000 people) of all industries. Although the crude fatality rates showed a downward trend, construction workers are still about four times more likely to be electrocuted at work than are workers in all industries combined. Nearly 40% of the 5083 fatal electrocutions in all industries combined occurred in construction, and 80% were associated with industrial wiring, appliances, and transmission lines. Electrocutions ranked as the second leading cause of death among construction workers, accounting for an average of 15% of traumatic deaths in the industry from 1980 to 1991. The study indicates that the workers most at risk of electrical injury are male, young, nonwhite, and electricians, structural metal workers, and laborers. The most likely time of injury is 11 a.m. to 3 p.m. from June to August. Focusing prevention on these populations and characteristics through better methods of worker and supervisor electrical safety training, use of adequate protective clothing, and compliance with established procedures could minimize the average annual loss of 168 U.S. construction workers.

782 consecutive construction work accidents: who is at risk? A 10-year analysis from a Swiss university hospital trauma unit.

PubMed

Frickmann, Frank; Wurm, Benjamin; Jeger, Victor; Lehmann, Beat; Zimmermann, Heinz; Exadaktylos, Aristomenis K

2012-09-06

Mortality and morbidity are particularly high in the building industry. The annual rate of non-fatal occupational accidents in Switzerland is 1,133 per 100,000 inhabitants. Retrospective analysis of the electronic database of a university emergency centre. Between 2001 and 2011, 782 occupational accidents to construction workers were recorded and analysed using specific demographic and medical keywords. Most patients were aged 30-39 (30.4%). 66.4% of the injured workers were foreigners. This is almost twice as high as the overall proportion of foreigners in Switzerland or in the Swiss labour market. 16% of the Swiss construction workers and 8% of the foreign construction workers suffered a severe injury with ISS >15. There was a trend for workers aged 60 and above to suffer an accident with a high ISS (p = 0.089). As in other European countries, most patients were in their thirties. Older construction workers suffered fewer injuries, although these tended to be more severe. The injuries were evenly distributed through the working days of the week. A special effort should be made that current health and safety measures are understood and applied by foreign and older construction workers.

Associations between safety climate and safety management practices in the construction industry.

PubMed

Marín, Luz S; Lipscomb, Hester; Cifuentes, Manuel; Punnett, Laura

2017-06-01

Safety climate, a group-level measure of workers' perceptions regarding management's safety priorities, has been suggested as a key predictor of safety outcomes. However, its relationship with actual injury rates is inconsistent. We posit that safety climate may instead be a parallel outcome of workplace safety practices, rather than a determinant of workers' safety behaviors or outcomes. Using a sample of 25 commercial construction companies in Colombia, selected by injury rate stratum (high, medium, low), we examined the relationship between workers' safety climate perceptions and safety management practices (SMPs) reported by safety officers. Workers' perceptions of safety climate were independent of their own company's implementation of SMPs, as measured here, and its injury rates. However, injury rates were negatively related to the implementation of SMPs. Safety management practices may be more important than workers' perceptions of safety climate as direct predictors of injury rates. © 2017 Wiley Periodicals, Inc.

Risk-informed regulation and safety management of nuclear power plants--on the prevention of severe accidents.

PubMed

Himanen, Risto; Julin, Ari; Jänkälä, Kalle; Holmberg, Jan-Erik; Virolainen, Reino

2012-11-01

There are four operating nuclear power plant (NPP) units in Finland. The Teollisuuden Voima (TVO) power company has two 840 MWe BWR units supplied by Asea-Atom at the Olkiluoto site. The Fortum corporation (formerly IVO) has two 500 MWe VVER 440/213 units at the Loviisa site. In addition, a 1600 MWe European Pressurized Water Reactor supplied by AREVA NP (formerly the Framatome ANP--Siemens AG Consortium) is under construction at the Olkiluoto site. Recently, the Finnish Parliament ratified the government Decision in Principle that the utilities' applications to build two new NPP units are in line with the total good of the society. The Finnish utilities, Fenno power company, and TVO company are in progress of qualifying the type of the new nuclear builds. In Finland, risk-informed applications are formally integrated in the regulatory process of NPPs that are already in the early design phase and these are to run through the construction and operation phases all through the entire plant service time. A plant-specific full-scope probabilistic risk assessment (PRA) is required for each NPP. PRAs shall cover internal events, area events (fires, floods), and external events such as harsh weather conditions and seismic events in all operating modes. Special attention is devoted to the use of various risk-informed PRA applications in the licensing of Olkiluoto 3 NPP. © 2012 Society for Risk Analysis.

Defining and Measuring Safety Climate: A Review of the Construction Industry Literature.

PubMed

Schwatka, Natalie V; Hecker, Steven; Goldenhar, Linda M

2016-06-01

Safety climate measurements can be used to proactively assess an organization's effectiveness in identifying and remediating work-related hazards, thereby reducing or preventing work-related ill health and injury. This review article focuses on construction-specific articles that developed and/or measured safety climate, assessed safety climate's relationship with other safety and health performance indicators, and/or used safety climate measures to evaluate interventions targeting one or more indicators of safety climate. Fifty-six articles met our inclusion criteria, 80% of which were published after 2008. Our findings demonstrate that researchers commonly defined safety climate as perception based, but the object of those perceptions varies widely. Within the wide range of indicators used to measure safety climate, safety policies, procedures, and practices were the most common, followed by general management commitment to safety. The most frequently used indicators should and do reflect that the prevention of work-related ill health and injury depends on both organizational and employee actions. Safety climate scores were commonly compared between groups (e.g. management and workers, different trades), and often correlated with subjective measures of safety behavior rather than measures of ill health or objective safety and health outcomes. Despite the observed limitations of current research, safety climate has been promised as a useful feature of research and practice activities to prevent work-related ill health and injury. Safety climate survey data can reveal gaps between management and employee perceptions, or between espoused and enacted policies, and trigger communication and action to narrow those gaps. The validation of safety climate with safety and health performance data offers the potential for using safety climate measures as a leading indicator of performance. We discuss these findings in relation to the related concept of safety culture and offer suggestions for future research and practice including (i) deriving a common definition of safety climate, (ii) developing and testing construction-specific indicators of safety climate, and (iii) focusing on construction-specific issues such as the transient workforce, subcontracting, work organization, and induction/acculturation processes. © The Author 2016. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

76 FR 25278 - Safety Zone; TriMet Bridge Project, Willamette River; Portland, OR

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-04

...-AA00 Safety Zone; TriMet Bridge Project, Willamette River; Portland, OR AGENCY: Coast Guard, DHS... safety zone during the construction of the TriMet Bridge on the Willamette River, in Portland, OR. This..., will be starting construction of the new Portland-Milwaukie Light Rail Bridge on July 1, 2011 (with in...

29 CFR 1926.1410 - Power line safety (all voltages)-equipment operations closer than the Table A zone.

Code of Federal Regulations, 2011 CFR

2011-07-01

... accessories) to a complete stop; wind conditions; degree of sway in the power line; lighting conditions, and... 29 Labor 8 2011-07-01 2011-07-01 false Power line safety (all voltages)-equipment operations... FOR CONSTRUCTION Cranes and Derricks in Construction § 1926.1410 Power line safety (all voltages...

25 CFR 502.22 - Construction and maintenance of the gaming facility, and the operation of that gaming is...

Code of Federal Regulations, 2011 CFR

2011-04-01

... the public health and safety. 502.22 Section 502.22 Indians NATIONAL INDIAN GAMING COMMISSION... protects the environment and the public health and safety. Construction and maintenance of the gaming... environment and the public health and safety means a tribe has identified and enforces laws, resolutions...

Nanomaterials in construction and demolition - how can we assess the risk if we don't know where they are?

NASA Astrophysics Data System (ADS)

Jones, Wendy; Gibb, Alistair; Goodier, Chris; Bust, Phil; Jin, Jie; Song, Mo

2015-05-01

This research, funded by the Institution of Occupational Safety and Health in the United Kingdom, has used a combination of literature review, web searching and unstructured interviews with a range of industry professionals to compile a list of products used in construction and the built environment which might contain nanomaterials. Samples of these products have been analysed using Scanning Electron Microscopy and Energy Dispersive X- Ray Spectroscopy to investigate whether nanomaterials are actually present and to what extent. Preliminary results of this testing are presented here. It is concluded that there is a discrepancy between the academic literature and the reality regarding the current application of nanomaterials in the construction industry and the built environment. There are also inaccuracies and deficiencies in the information provided by manufacturers which makes it difficult to accurately assess the location and application of nanomaterials within the industry. Further testing is planned to evaluate the risk of nanoparticle release from nano-enabled building products at their end of life by reproducing common demolition and recycling processes such as crushing, grinding, burning and melting. Results of this will form the basis of practical guidance for the construction, demolition and recycling industries to help them identify where particular protection or control measures may be appropriate as well as providing reassurance where no additional action is required.

29 CFR 1926.1091 - Recordkeeping requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Diving Recordkeeping § 1926.1091 Recordkeeping requirements. Note: The requirements applicable to construction work under this...

15 CFR 270.321 - Entry and inspection of property where building components, materials, artifacts, and records...

Code of Federal Regulations, 2010 CFR

2010-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence; Information Created Pursuant to...

15 CFR 270.321 - Entry and inspection of property where building components, materials, artifacts, and records...

Code of Federal Regulations, 2013 CFR

2013-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence; Information Created Pursuant to...

15 CFR 270.321 - Entry and inspection of property where building components, materials, artifacts, and records...

Code of Federal Regulations, 2014 CFR

2014-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence; Information Created Pursuant to...

15 CFR 270.321 - Entry and inspection of property where building components, materials, artifacts, and records...

Code of Federal Regulations, 2011 CFR

2011-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence; Information Created Pursuant to...

15 CFR 270.321 - Entry and inspection of property where building components, materials, artifacts, and records...

Code of Federal Regulations, 2012 CFR

2012-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence; Information Created Pursuant to...

Benchmarking Global Food Safety Performances: The Era of Risk Intelligence.

PubMed

Valleé, Jean-Charles Le; Charlebois, Sylvain

2015-10-01

Food safety data segmentation and limitations hamper the world's ability to select, build up, monitor, and evaluate food safety performance. Currently, there is no metric that captures the entire food safety system, and performance data are not collected strategically on a global scale. Therefore, food safety benchmarking is essential not only to help monitor ongoing performance but also to inform continued food safety system design, adoption, and implementation toward more efficient and effective food safety preparedness, responsiveness, and accountability. This comparative study identifies and evaluates common elements among global food safety systems. It provides an overall world ranking of food safety performance for 17 Organisation for Economic Co-Operation and Development (OECD) countries, illustrated by 10 indicators organized across three food safety risk governance domains: risk assessment (chemical risks, microbial risks, and national reporting on food consumption), risk management (national food safety capacities, food recalls, food traceability, and radionuclides standards), and risk communication (allergenic risks, labeling, and public trust). Results show all countries have very high food safety standards, but Canada and Ireland, followed by France, earned excellent grades relative to their peers. However, any subsequent global ranking study should consider the development of survey instruments to gather adequate and comparable national evidence on food safety.

Sharing Stories: Community/Science Collaboration and Learning As We Go

NASA Astrophysics Data System (ADS)

Marino, E.; Weyiouanna, A.

2017-12-01

*Annie Weyiouanna is the first author of this presentation - because of AGU funding and submission procedures, Elizabeth Marino is incorrectly identified in the program and online as first author. In Shishmaref, Alaska, climate change is rapidly affecting many aspects of life including subsistence hunting, and seasonal gathering. Also critical is that climate change is creating flooding & erosion on the island that could threaten the safety of the community in the future. Because of this, community members, along with social and natural scientists have been vocal about the fact that something needs to be done to ensure the safety of the community - whether that means protecting the island sufficiently in place, or relocating community members off of the island, or both. In this presentation, Annie Weyiouanna will discuss the seasonal patterns on the island and the effect that climate change has had on her community; Elizabeth Marino will follow up with her perspective as an outsider who has studied the historical construction of risk in Shishmaref. Finally the two will discuss, going forward, how scientists should work to open up avenues for community members to voice their own stories and experiences; and how understanding the links between policy possibilites and local experiences might be a good step going forward to instigate positive change and safety for at risk communities.

A Review of Occupational Injury Research In Malaysia.

PubMed

Ganesh, C S; Krishnan, R

2016-06-01

A literature review of 16 papers on occupational injury research in Malaysia published during a 13-year period from 2000-2013 was carried out. The objective of this review and article selection was based on relevance to the research theme and mention of areas for future research. Most of the publications have focused on descriptive epidemiology, management practices, worker's knowledge, attitude, training, and rehabilitation services. The transportation, agriculture and construction sectors were found to be the most hazardous sectors and would benefit the most from Occupational Safety & Health (OSH) research and interventions. There is a strong need to develop a national injury surveillance system and also a mechanism to ensure adherence to the Occupational Safety & Health Act(OSHA) 1994. Detailed description and identification of risk factors for occupational injury in the environment, including machinery and equipment used was generally lacking. Future research on occupational injury should focus on surveillance to determine the magnitude of occupational injuries, determination of risk factors, identifying costeffective interventions (such as enforcement of OSHA regulations), and assessment of rehabilitation services. Relevant government agencies, universities, corporate sector and occupational safety organizations need to play a proactive role in identifying priority areas and research capacity building. Funding for occupational injury should be commensurate with the magnitude of the problem.

Determining an appropriate integrated assessment model of tourism safety risk within the Changbai Mountain Scenic Area

NASA Astrophysics Data System (ADS)

Zhou, Lijun; Liu, Jisheng

2017-03-01

Tourism safety is gradually gaining more attention due to the rapid development of the tourism industry in China. Changbai Mountain is one of the most famous mountainous scenic areas in Northeast Asia. Assessment on Changbai Mountain scenic area’s tourism safety risk could do a favor in detecting influence factor of tourism safety risk and classifying tourism safety risk rank, thereby reducing and preventing associated tourism safety risks. This paper uses the Changbai Mountain scenic area as the study subject. By the means of experts scoring and analytic hierarchy process on quantified relevant evaluation indicator, the grid GIS method is used to vectorize the relevant data within a 1000m grid. It respectively analyzes main indicators associated tourism safety risk in Changbai Mountain scenic area, including hazard, exposure, vulnerability and ability to prevent and mitigate disasters. The integrated tourism safety risk model is used to comprehensively evaluate tourism safety risk in Changbai Mountain scenic area.

29 CFR 1910.36 - Design and construction requirements for exit routes.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 5 2011-07-01 2011-07-01 false Design and construction requirements for exit routes. 1910.36 Section 1910.36 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Means of Egress § 1910.36 Design and construction requirements for exit...

75 FR 21990 - Safety Zone; Extended Debris Removal in the Lake Champlain Bridge Construction Zone (Between...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-27

...-AA00 Safety Zone; Extended Debris Removal in the Lake Champlain Bridge Construction Zone (Between... surrounding the Lake Champlain Bridge construction zone between Chimney Point, VT and Crown Point, NY. This... of debris from the old Crown Point bridge demolition. The debris must be cleared from the navigable...

Trade associations and labor organizations as intermediaries for disseminating workplace safety and health information.

PubMed

Okun, Andrea H; Watkins, Janice P; Schulte, Paul A

2017-09-01

There has not been a systematic study of the nature and extent to which business and professional trade associations and labor organizations obtain and communicate workplace safety and health information to their members. These organizations can serve as important intermediaries and play a central role in transferring this information to their members. A sample of 2294 business and professional trade associations and labor organizations in eight industrial sectors identified by the National Occupational Research Agenda was surveyed via telephone. A small percent of these organizations (40.9% of labor organizations, 15.6% of business associations, and 9.6% of professional associations) were shown to distribute workplace safety and health information to their members. Large differences were also observed between industrial sectors with construction having the highest total percent of organizations disseminating workplace safety and health information. There appears to be significant potential to utilize trade and labor organizations as intermediaries for transferring workplace safety and health information to their members. Government agencies have a unique opportunity to partner with these organizations and to utilize their existing communication channels to address high risk workplace safety and health concerns. Published 2017. This article is a U.S. Government work and is in the public domain in the USA.

Developing a model for hospital inherent safety assessment: Conceptualization and validation.

PubMed

Yari, Saeed; Akbari, Hesam; Gholami Fesharaki, Mohammad; Khosravizadeh, Omid; Ghasemi, Mohammad; Barsam, Yalda; Akbari, Hamed

2018-01-01

Paying attention to the safety of hospitals, as the most crucial institute for providing medical and health services wherein a bundle of facilities, equipment, and human resource exist, is of significant importance. The present research aims at developing a model for assessing hospitals' safety based on principles of inherent safety design. Face validity (30 experts), content validity (20 experts), construct validity (268 examples), convergent validity, and divergent validity have been employed to validate the prepared questionnaire; and the items analysis, the Cronbach's alpha test, ICC test (to measure reliability of the test), composite reliability coefficient have been used to measure primary reliability. The relationship between variables and factors has been confirmed at 0.05 significance level by conducting confirmatory factor analysis (CFA) and structural equations modeling (SEM) technique with the use of Smart-PLS. R-square and load factors values, which were higher than 0.67 and 0.300 respectively, indicated the strong fit. Moderation (0.970), simplification (0.959), substitution (0.943), and minimization (0.5008) have had the most weights in determining the inherent safety of hospital respectively. Moderation, simplification, and substitution, among the other dimensions, have more weight on the inherent safety, while minimization has the less weight, which could be due do its definition as to minimize the risk.

Annual report to Congress: Department of Energy activities relating to the Defense Nuclear Facilities Safety Board, Calendar Year 1999

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2000-02-01

This is the tenth Annual Report to the Congress describing Department of Energy activities in response to formal recommendations and other interactions with the Defense Nuclear Facilities Safety Board (Board). The Board, an independent executive-branch agency established in 1988, provides advice and recommendations to the Secretary of Energy regarding public health and safety issues at the Department's defense nuclear facilities. The Board also reviews and evaluates the content and implementation of health and safety standards, as well as other requirements, relating to the design, construction, operation, and decommissioning of the Department's defense nuclear facilities. During 1999, Departmental activities resulted inmore » the closure of nine Board recommendations. In addition, the Department has completed all implementation plan milestones associated with three Board recommendations. One new Board recommendation was received and accepted by the Department in 1999, and a new implementation plan is being developed to address this recommendation. The Department has also made significant progress with a number of broad-based initiatives to improve safety. These include expanded implementation of integrated safety management at field sites, opening of a repository for long-term storage of transuranic wastes, and continued progress on stabilizing excess nuclear materials to achieve significant risk reduction.« less

29 CFR 1926.1115 - 4-Dimethylaminoazobenzene.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Toxic and Hazardous Substances § 1926.1115 4-Dimethylaminoazobenzene. Note: The requirements applicable to construction work under this...

15 CFR 270.301 - Policy.

Code of Federal Regulations, 2010 CFR

2010-01-01

... STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence; Information Created Pursuant to an Investigation; and Protection of Information § 270.301 Policy. Evidence collected and information created by Team...

15 CFR 270.320 - Entry and inspection of site where a building failure has occurred.

Code of Federal Regulations, 2013 CFR

2013-01-01

... CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence... deploys a Team, the Team members will be issued notices of inspection authority to enter and inspect the...

15 CFR 270.301 - Policy.

Code of Federal Regulations, 2013 CFR

2013-01-01

... STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence; Information Created Pursuant to an Investigation; and Protection of Information § 270.301 Policy. Evidence collected and information created by Team...

15 CFR 270.301 - Policy.

Code of Federal Regulations, 2012 CFR

2012-01-01

... STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence; Information Created Pursuant to an Investigation; and Protection of Information § 270.301 Policy. Evidence collected and information created by Team...

15 CFR 270.301 - Policy.

Code of Federal Regulations, 2014 CFR

2014-01-01

... STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence; Information Created Pursuant to an Investigation; and Protection of Information § 270.301 Policy. Evidence collected and information created by Team...

15 CFR 270.301 - Policy.

Code of Federal Regulations, 2011 CFR

2011-01-01

... STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence; Information Created Pursuant to an Investigation; and Protection of Information § 270.301 Policy. Evidence collected and information created by Team...

15 CFR 270.320 - Entry and inspection of site where a building failure has occurred.

Code of Federal Regulations, 2012 CFR

2012-01-01

... CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence... deploys a Team, the Team members will be issued notices of inspection authority to enter and inspect the...

15 CFR 270.320 - Entry and inspection of site where a building failure has occurred.

Code of Federal Regulations, 2010 CFR

2010-01-01

... CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence... deploys a Team, the Team members will be issued notices of inspection authority to enter and inspect the...

15 CFR 270.320 - Entry and inspection of site where a building failure has occurred.

Code of Federal Regulations, 2014 CFR

2014-01-01

... CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence... deploys a Team, the Team members will be issued notices of inspection authority to enter and inspect the...

15 CFR 270.320 - Entry and inspection of site where a building failure has occurred.

Code of Federal Regulations, 2011 CFR

2011-01-01

... CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence... deploys a Team, the Team members will be issued notices of inspection authority to enter and inspect the...

Impact of Safety Training and Interventions on Training-Transfer: Targeting Migrant Construction Workers.

PubMed

Hussain, Rahat; Pedro, Akeem; Lee, Do Yeop; Pham, Hai Chien; Park, Chan Sik

2018-05-01

Despite substantial efforts to improve construction safety training, the accident rate of migrant workers is still high. One of the primary factors contributing to the inefficacy of training includes information delivery gaps during training sessions (knowledge-transfer). In addition, there is insufficient evidence that these training programs alone are effective enough to enable migrant workers to transfer their skills to jobsite (training-transfer). This research attempts to identify and evaluate additional interventions to improve the transfer of acquired knowledge to workplace. For this purpose, this study presents the first known experimental effort to assess the effect of interventions on migrant work groups in a multinational construction project in Qatar. Data analysis reveals that the adoption of training programs with the inclusion of interventions significantly improves training-transfer. Construction safety experts can leverage the findings of this study to enhance training-transfer by increasing worker's safety performance and hazard identification ability.

Effects of safety and health training on work-related injury among construction laborers.

PubMed

Dong, Xiuwen; Entzel, Pamela; Men, Yurong; Chowdhury, Risana; Schneider, Scott

2004-12-01

This study was designed to evaluate the effects of safety and health training on work-related injury in the construction industry. Union health insurance records, union training records, and workers compensation data for 1993 and 1994 were analyzed for more than 8000 construction laborers in Washington State. After controlling for demographic factors, laborers who received safety and health training during the study period were 12% (95% confidence interval [CI] = 0.75-1.02) less likely than nontrained laborers to file for workers compensation. Among workers 16 to 24 years old, training was associated with a 42% (95% CI = 0.35-0.95) reduction in claims. These findings provide evidence of the effectiveness of safety and health training in preventing occupational injuries among construction laborers, particularly among younger workers. However, the results cover only a limited time and the long-term effects remain unclear.

Diné (Navajo) parents' and community leaders' perceptions of agriculture-related injury risk to youth: a social narrative.

PubMed

Shumway, K; Pate, M L; McNeal, L G

2014-01-01

The purpose of this study was to provide a formative needs assessment of Diné (Navajo) parents for the prevention of childhood injuries resulting from livestock and horses. The research objectives were to identify parents' perceived livestock and horse related injury risks to Diné children and describe Diné community stakeholder input on prevention interventions for reducing injury risks to children associated with livestock and horse related activities on farms or ranches. The assessment used a survey constructed of closed and open-response questions to gauge Diné farmers' and ranchers' perceptions of injury risks to children who live or work on agricultural operations. Additional questions were asked to gauge Diné acceptance of an online training program as a prevention intervention to reduce livestock and horse related injuries to children. A total of 96 individuals agreed to participate in the survey and provided usable responses. A total of 53.2% (f = 50) of participants were female. Sixty-three percent of participants (f = 58) perceived that youth who work with intact male livestock were at high risk for injury. A total of 25 individuals perceived that youth who ride horses without equestrian helmets were at high risk for injury. Approximately 96% (f = 89) of those surveyed agreed or strongly agreed that they would use an online training program to promote agricultural health and safety for Diné youth. When participants were asked if there were safety issues associated with having youth working on a farm or ranch, a very large portion felt that the biggest issue was a lack of education and instruction from elders. A recommendation for an injury prevention practice included developing a user-friendly online network, giving parents and community leaders access to resources to assist in educating youth in local agricultural traditions integrated with safety training.

Construction safety in DOE. Part 1, Students guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Handwerk, E C

This report is the first part of a compilation of safety standards for construction activities on DOE facilities. This report covers the following areas: general safety and health provisions; occupational health and environmental control/haz mat; personal protective equipment; fire protection and prevention; signs, signals, and barricades; materials handling, storage, use, and disposal; hand and power tools; welding and cutting; electrical; and scaffolding.

Opportunities and challenges of nanotechnology in the green economy.

PubMed

Iavicoli, Ivo; Leso, Veruscka; Ricciardi, Walter; Hodson, Laura L; Hoover, Mark D

2014-10-07

In a world of finite resources and ecosystem capacity, the prevailing model of economic growth, founded on ever-increasing consumption of resources and emission pollutants, cannot be sustained any longer. In this context, the "green economy" concept has offered the opportunity to change the way that society manages the interaction of the environmental and economic domains. To enable society to build and sustain a green economy, the associated concept of "green nanotechnology" aims to exploit nano-innovations in materials science and engineering to generate products and processes that are energy efficient as well as economically and environmentally sustainable. These applications are expected to impact a large range of economic sectors, such as energy production and storage, clean up-technologies, as well as construction and related infrastructure industries. These solutions may offer the opportunities to reduce pressure on raw materials trading on renewable energy, to improve power delivery systems to be more reliable, efficient and safe as well as to use unconventional water sources or nano-enabled construction products therefore providing better ecosystem and livelihood conditions.However, the benefits of incorporating nanomaterials in green products and processes may bring challenges with them for environmental, health and safety risks, ethical and social issues, as well as uncertainty concerning market and consumer acceptance. Therefore, our aim is to examine the relationships among guiding principles for a green economy and opportunities for introducing nano-applications in this field as well as to critically analyze their practical challenges, especially related to the impact that they may have on the health and safety of workers involved in this innovative sector. These are principally due to the not fully known nanomaterial hazardous properties, as well as to the difficulties in characterizing exposure and defining emerging risks for the workforce. Interestingly, this review proposes action strategies for the assessment, management and communication of risks aimed to precautionary adopt preventive measures including formation and training of employees, collective and personal protective equipment, health surveillance programs to protect the health and safety of nano-workers. It finally underlines the importance that occupational health considerations will have on achieving an effectively sustainable development of nanotechnology.

An application of the Pareto method in surveys to diagnose managers' and workers' perception of occupational safety and health on selected Polish construction sites.

PubMed

Obolewicz, Jerzy; Dąbrowski, Andrzej

2017-11-16

The construction industry is an important sector of the economy in Poland. According to the National Labour Inspectorate (PIP) data of 2014, the number of victims of fatal accidents in the construction sector amounted to 80 as compared with 187 injured in all other sectors of economy in Poland. This article presents the results of surveys on the impact of construction worker behaviour on the occupational safety and health outcomes. The surveys took into account the point of view of both construction site management (tactical level) and construction workers (operational level). For the analysis of results, the method of numerical taxonomy and Pareto charts was employed, which allowed the authors to identify the areas of occupational safety and health at both an operational and a tactical level, in which improvement actions needed to be proposed for workers employed in micro, small, medium and large construction enterprises.

There is more to risk and safety planning than dramatic risks: Mental health nurses' risk assessment and safety-management practice.

PubMed

Higgins, Agnes; Doyle, Louise; Downes, Carmel; Morrissey, Jean; Costello, Paul; Brennan, Michael; Nash, Michael

2016-04-01

Risk assessment and safety planning are considered a cornerstone of mental health practice, yet limited research exists into how mental health nurses conceptualize 'risk' and how they engage with risk assessment and safety planning. The aim of the present study was to explore mental health nurses' practices and confidence in risk assessment and safety planning. A self-completed survey was administered to 381 mental health nurses in Ireland. The findings indicate that nurses focus on risk to self and risk to others, with the risk of suicide, self-harm, substance abuse, and violence being most frequently assessed. Risk from others and 'iatrogenic' risk were less frequently considered. Overall, there was limited evidence of recovery-oriented practice in relation to risk. The results demonstrate a lack of meaningful engagement with respect to collaborative safety planning, the identification and inclusion of protective factors, and the inclusion of positive risk-taking opportunities. In addition, respondents report a lack of confidence working with positive risk taking and involving family/carers in the risk-assessment and safety-planning process. Gaps in knowledge about risk-assessment and safety-planning practice, which could be addressed through education, are identified, as are the implications of the findings for practice and research. © 2015 Australian College of Mental Health Nurses Inc.

Analysis of the Influence of Construction Insulation Systems on Public Safety in China

PubMed Central

Zhang, Guowei; Zhu, Guoqing; Zhao, Guoxiang

2016-01-01

With the Government of China’s proposed Energy Efficiency Regulations (GB40411-2007), the implementation of external insulation systems will be mandatory in China. The frequent external insulation system fires cause huge numbers of casualties and extensive property damage and have rapidly become a new hot issue in construction evacuation safety in China. This study attempts to reconstruct an actual fire scene and propose a quantitative risk assessment method for upward insulation system fires using thermal analysis tests and large eddy simulations (using the Fire Dynamics Simulator (FDS) software). Firstly, the pyrolysis and combustion characteristics of Extruded polystyrene board (XPS panel), such as ignition temperature, combustion heat, limiting oxygen index, thermogravimetric analysis and thermal radiation analysis were studied experimentally. Based on these experimental data, large eddy simulation was then applied to reconstruct insulation system fires. The results show that upward insulation system fires could be accurately reconstructed by using thermal analysis test and large eddy simulation. The spread of insulation material system fires in the vertical direction is faster than that in the horizontal direction. Moreover, we also find that there is a possibility of flashover in enclosures caused by insulation system fires as the smoke temperature exceeds 600 °C. The simulation methods and experimental results obtained in this paper could provide valuable references for fire evacuation, hazard assessment and fire resistant construction design studies. PMID:27589774

Analysis of the Influence of Construction Insulation Systems on Public Safety in China.

PubMed

Zhang, Guowei; Zhu, Guoqing; Zhao, Guoxiang

2016-08-30

With the Government of China's proposed Energy Efficiency Regulations (GB40411-2007), the implementation of external insulation systems will be mandatory in China. The frequent external insulation system fires cause huge numbers of casualties and extensive property damage and have rapidly become a new hot issue in construction evacuation safety in China. This study attempts to reconstruct an actual fire scene and propose a quantitative risk assessment method for upward insulation system fires using thermal analysis tests and large eddy simulations (using the Fire Dynamics Simulator (FDS) software). Firstly, the pyrolysis and combustion characteristics of Extruded polystyrene board (XPS panel), such as ignition temperature, combustion heat, limiting oxygen index, thermogravimetric analysis and thermal radiation analysis were studied experimentally. Based on these experimental data, large eddy simulation was then applied to reconstruct insulation system fires. The results show that upward insulation system fires could be accurately reconstructed by using thermal analysis test and large eddy simulation. The spread of insulation material system fires in the vertical direction is faster than that in the horizontal direction. Moreover, we also find that there is a possibility of flashover in enclosures caused by insulation system fires as the smoke temperature exceeds 600 °C. The simulation methods and experimental results obtained in this paper could provide valuable references for fire evacuation, hazard assessment and fire resistant construction design studies.

A Real-Time Construction Safety Monitoring System for Hazardous Gas Integrating Wireless Sensor Network and Building Information Modeling Technologies.

PubMed

Cheung, Weng-Fong; Lin, Tzu-Hsuan; Lin, Yu-Cheng

2018-02-02

In recent years, many studies have focused on the application of advanced technology as a way to improve management of construction safety management. A Wireless Sensor Network (WSN), one of the key technologies in Internet of Things (IoT) development, enables objects and devices to sense and communicate environmental conditions; Building Information Modeling (BIM), a revolutionary technology in construction, integrates database and geometry into a digital model which provides a visualized way in all construction lifecycle management. This paper integrates BIM and WSN into a unique system which enables the construction site to visually monitor the safety status via a spatial, colored interface and remove any hazardous gas automatically. Many wireless sensor nodes were placed on an underground construction site and to collect hazardous gas level and environmental condition (temperature and humidity) data, and in any region where an abnormal status is detected, the BIM model will alert the region and an alarm and ventilator on site will start automatically for warning and removing the hazard. The proposed system can greatly enhance the efficiency in construction safety management and provide an important reference information in rescue tasks. Finally, a case study demonstrates the applicability of the proposed system and the practical benefits, limitations, conclusions, and suggestions are summarized for further applications.

76 FR 2579 - Safety Zone; Lake Mead Intake Construction, Lake Mead, Boulder City, NV

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-14

...-AA00 Safety Zone; Lake Mead Intake Construction, Lake Mead, Boulder City, NV AGENCY: Coast Guard, DHS... waters of Lake Mead in support of the construction project for Lake Mead's Intake 3 during the first 6... blasting operations for the placement of a water intake pipe in Lake Mead during the first 6 months of 2011...