Study of Subway Station Design and Construction

DOT National Transportation Integrated Search

1977-03-01

Due to the high cost of urban underground transit construction in recent years, construction practices used in other countries were reviewed to determine if construction methods which are commonly accepted there might be adapted to U.S. practice. Des...

Constructing service-oriented architecture adoption maturity matrix using Kano model

NASA Astrophysics Data System (ADS)

Hamzah, Mohd Hamdi Irwan; Baharom, Fauziah; Mohd, Haslina

2017-10-01

Commonly, organizations adopted Service-Oriented Architecture (SOA) because it can provide a flexible reconfiguration and can reduce the development time and cost. In order to guide the SOA adoption, previous industry and academia have constructed SOA maturity model. However, there is a limited number of works on how to construct the matrix in the previous SOA maturity model. Therefore, this study is going to provide a method that can be used in order to construct the matrix in the SOA maturity model. This study adapts Kano Model to construct the cross evaluation matrix focused on SOA adoption IT and business benefits. This study found that Kano Model can provide a suitable and appropriate method for constructing the cross evaluation matrix in SOA maturity model. Kano model also can be used to plot, organize and better represent the evaluation dimension for evaluating the SOA adoption.

Study on evaluation of construction reliability for engineering project based on fuzzy language operator

NASA Astrophysics Data System (ADS)

Shi, Yu-Fang; Ma, Yi-Yi; Song, Ping-Ping

2018-03-01

System Reliability Theory is a research hotspot of management science and system engineering in recent years, and construction reliability is useful for quantitative evaluation of project management level. According to reliability theory and target system of engineering project management, the defination of construction reliability appears. Based on fuzzy mathematics theory and language operator, value space of construction reliability is divided into seven fuzzy subsets and correspondingly, seven membership function and fuzzy evaluation intervals are got with the operation of language operator, which provides the basis of corresponding method and parameter for the evaluation of construction reliability. This method is proved to be scientific and reasonable for construction condition and an useful attempt for theory and method research of engineering project system reliability.

B2B collaboration method through trust values for e-supply chain integrator: a case study of Malaysian construction industry

NASA Astrophysics Data System (ADS)

Ab. Aziz, Norshakirah; Ahmad, Rohiza; Dhanapal Durai, Dominic

2011-12-01

Limited trust, cooperation and communication have been identified as some of the issues that hinder collaboration among business partners. These one also true in the acceptance of e-supply chain integrator among organizations that involve in the same industry. On top of that, the huge number of components in supply chain industry also makes it impossible to include entire supply chain components in the integrator. Hence, this study intends to propose a method for identifying "trusted" collaborators for inclusion into an e-supply chain integrator. For the purpose of constructing and validating the method, the Malaysian construction industry is chosen as the case study due to its size and importance to the economy. This paper puts forward the background of the research, some relevant literatures which lead to trust values elements formulation, data collection from Malaysian Construction Supply Chain and a glimpse of the proposed method for trusted partner selection. Future work is also presented to highlight the next step of this research.

Study on the Application of the Kent Index Method on the Risk Assessment of Disastrous Accidents in Subway Engineering

PubMed Central

Lu, Hao; Wang, Mingyang; Yang, Baohuai; Rong, Xiaoli

2013-01-01

With the development of subway engineering, according to uncertain factors and serious accidents involved in the construction of subways, implementing risk assessment is necessary and may bring a number of benefits for construction safety. The Kent index method extensively used in pipeline construction is improved to make risk assessment much more practical for the risk assessment of disastrous accidents in subway engineering. In the improved method, the indexes are divided into four categories, namely, basic, design, construction, and consequence indexes. In this study, a risk assessment model containing four kinds of indexes is provided. Three kinds of risk occurrence modes are listed. The probability index model which considers the relativity of the indexes is established according to the risk occurrence modes. The model provides the risk assessment process through the fault tree method and has been applied in the risk assessment of Nanjing subway's river-crossing tunnel construction. Based on the assessment results, the builders were informed of what risks should be noticed and what they should do to avoid the risks. The need for further research is discussed. Overall, this method may provide a tool for the builders, and improve the safety of the construction. PMID:23710136

Improving concrete overlay construction.

DOT National Transportation Integrated Search

2010-03-01

Several road construction projects involving concrete overlays at the state and county levels in Iowa in 2009 were studied for : construction techniques and methods. The projects that were evaluated consisted of sites in four Iowa counties: Osceola, ...

Convergence and divergence across construction methods for human brain white matter networks: an assessment based on individual differences.

PubMed

Zhong, Suyu; He, Yong; Gong, Gaolang

2015-05-01

Using diffusion MRI, a number of studies have investigated the properties of whole-brain white matter (WM) networks with differing network construction methods (node/edge definition). However, how the construction methods affect individual differences of WM networks and, particularly, if distinct methods can provide convergent or divergent patterns of individual differences remain largely unknown. Here, we applied 10 frequently used methods to construct whole-brain WM networks in a healthy young adult population (57 subjects), which involves two node definitions (low-resolution and high-resolution) and five edge definitions (binary, FA weighted, fiber-density weighted, length-corrected fiber-density weighted, and connectivity-probability weighted). For these WM networks, individual differences were systematically analyzed in three network aspects: (1) a spatial pattern of WM connections, (2) a spatial pattern of nodal efficiency, and (3) network global and local efficiencies. Intriguingly, we found that some of the network construction methods converged in terms of individual difference patterns, but diverged with other methods. Furthermore, the convergence/divergence between methods differed among network properties that were adopted to assess individual differences. Particularly, high-resolution WM networks with differing edge definitions showed convergent individual differences in the spatial pattern of both WM connections and nodal efficiency. For the network global and local efficiencies, low-resolution and high-resolution WM networks for most edge definitions consistently exhibited a highly convergent pattern in individual differences. Finally, the test-retest analysis revealed a decent temporal reproducibility for the patterns of between-method convergence/divergence. Together, the results of the present study demonstrated a measure-dependent effect of network construction methods on the individual difference of WM network properties. © 2015 Wiley Periodicals, Inc.

Constructing Ecological Networks Based on Habitat Quality Assessment: A Case Study of Changzhou, China

NASA Astrophysics Data System (ADS)

Gao, Yu; Ma, Lei; Liu, Jiaxun; Zhuang, Zhuzhou; Huang, Qiuhao; Li, Manchun

2017-04-01

Fragmentation and reduced continuity of habitat patches threaten the environment and biodiversity. Recently, ecological networks are increasingly attracting the attention of researchers as they provide fundamental frameworks for environmental protection. This study suggests a set of procedures to construct an ecological network. First, we proposed a method to construct a landscape resistance surface based on the assessment of habitat quality. Second, to analyze the effect of the resistance surface on corridor simulations, we used three methods to construct resistance surfaces: (1) the method proposed in this paper, (2) the entropy coefficient method, and (3) the expert scoring method. Then, we integrated habitat patches and resistance surfaces to identify potential corridors using graph theory. These procedures were tested in Changzhou, China. Comparing the outputs of using different resistance surfaces demonstrated that: (1) different landscape resistance surfaces contribute to how corridors are identified, but only slightly affect the assessment of the importance of habitat patches and potential corridors; (2) the resistance surface, which is constructed based on habitat quality, is more applicable to corridor simulations; and (3) the assessment of the importance of habitat patches is fundamental for ecological network optimization in the conservation of critical habitat patches and corridors.

Constructing Ecological Networks Based on Habitat Quality Assessment: A Case Study of Changzhou, China

PubMed Central

Gao, Yu; Ma, Lei; Liu, Jiaxun; Zhuang, Zhuzhou; Huang, Qiuhao; Li, Manchun

2017-01-01

Fragmentation and reduced continuity of habitat patches threaten the environment and biodiversity. Recently, ecological networks are increasingly attracting the attention of researchers as they provide fundamental frameworks for environmental protection. This study suggests a set of procedures to construct an ecological network. First, we proposed a method to construct a landscape resistance surface based on the assessment of habitat quality. Second, to analyze the effect of the resistance surface on corridor simulations, we used three methods to construct resistance surfaces: (1) the method proposed in this paper, (2) the entropy coefficient method, and (3) the expert scoring method. Then, we integrated habitat patches and resistance surfaces to identify potential corridors using graph theory. These procedures were tested in Changzhou, China. Comparing the outputs of using different resistance surfaces demonstrated that: (1) different landscape resistance surfaces contribute to how corridors are identified, but only slightly affect the assessment of the importance of habitat patches and potential corridors; (2) the resistance surface, which is constructed based on habitat quality, is more applicable to corridor simulations; and (3) the assessment of the importance of habitat patches is fundamental for ecological network optimization in the conservation of critical habitat patches and corridors. PMID:28393879

Examining Construct Congruence for Psychometric Tests: A Note on an Extension to Binary Items and Nesting Effects.

PubMed

Raykov, Tenko; Marcoulides, George A; Dimitrov, Dimiter M; Li, Tatyana

2018-02-01

This article extends the procedure outlined in the article by Raykov, Marcoulides, and Tong for testing congruence of latent constructs to the setting of binary items and clustering effects. In this widely used setting in contemporary educational and psychological research, the method can be used to examine if two or more homogeneous multicomponent instruments with distinct components measure the same construct. The approach is useful in scale construction and development research as well as in construct validation investigations. The discussed method is illustrated with data from a scholastic aptitude assessment study.

The construction of partner potential from the general potential Rosen-Morse and Manning Rosen in 4 dimensional Schrodinger system

NASA Astrophysics Data System (ADS)

Nathalia Wea, Kristiana; Suparmi, A.; Cari, C.; Wahyulianti

2017-11-01

The solution of the Schrodinger equation with physical potential is the important part in quantum physics. Many methods have been developed to resolve the Schrodinger equation. The Nikiforov-Uvarov method and supersymmetric method are the most methods that interesting to be explored. The supersymmetric method not only used to solve the Schrodinger equation but also used to construct the partner potential from a general potential. In this study, the Nikiforov-Uvarov method was used to solve the Schrodinger equation while the supersymmetric method was used to construction partner potential. The study about the construction of the partner potential from general potential Rosen-Morse and Manning Rosen in D-dimensional Schrodinger system has been done. The partner potential was obtained are solvable. By using the Nikiforov-Uvarov method the eigenfunction of the Schrodinger equation in D-dimensional system with general potential Rosen-Morse and Manning Rosen and the Schrodinger equation in D-dimensional system with partner potential Rosen-Morse and Manning Rosen are determined. The eigenfunctions are different between the Schrodinger equation with general potential and the Schrodinger potential with the partner potential.

Illustrating a Mixed-Method Approach for Validating Culturally Specific Constructs

ERIC Educational Resources Information Center

Hitchcock, J.H.; Nastasi, B.K.; Dai, D.Y.; Newman, J.; Jayasena, A.; Bernstein-Moore, R.; Sarkar, S.; Varjas, K.

2005-01-01

The purpose of this article is to illustrate a mixed-method approach (i.e., combining qualitative and quantitative methods) for advancing the study of construct validation in cross-cultural research. The article offers a detailed illustration of the approach using the responses 612 Sri Lankan adolescents provided to an ethnographic survey. Such…

The Relationship between EQ & Constructive and Non-Constructive Problem Solving Styles among Payame Noor University's Students of Abadan in the Year 2014

ERIC Educational Resources Information Center

Rajaeipoor, Saeed; Siadat, Ali; Hoveida, Reza; Mohammadi, Nazanin; Keshavarz, Akbar; Salimi, Mohammad Hossein; Abbasian, Mohammad Reza; Shamsi, Ali

2015-01-01

The objective of the present study is considering the relationship between EQ & constructive and non-constructive problem solving styles among students. The applied methodology is cross-correlation method. The statistical population in this study is all the educational sciences' students of Payame Noor university of Abadan in the year 2014 and…

Key techniques and risk management for the application of the Pile-Beam-Arch (PBA) excavation method: a case study of the Zhongjie subway station.

PubMed

Guan, Yong-ping; Zhao, Wen; Li, Shen-gang; Zhang, Guo-bin

2014-01-01

The design and construction of shallow-buried tunnels in densely populated urban areas involve many challenges. The ground movements induced by tunneling effects pose potential risks to infrastructure such as surface buildings, pipelines, and roads. In this paper, a case study of the Zhongjie subway station located in Shenyang, China, is examined to investigate the key construction techniques and the influence of the Pile-Beam-Arch (PBA) excavation method on the surrounding environment. This case study discusses the primary risk factors affecting the environmental safety and summarizes the corresponding risk mitigation measures and key techniques for subway station construction using the PBA excavation method in a densely populated urban area.

A case-control study of airways obstruction among construction workers: Airways Obstruction Among Construction Workers

DOE PAGES

Dement, John; Welch, Laura; Ringen, Knut; ...

2015-06-29

Background: While smoking is the major cause of chronic obstructive pulmonary disease (COPD), occupational exposures to vapors, gases, dusts, and fumes (VGDF) increase COPD risk. This case-control study estimated the risk of COPD attributable to occupational exposures among construction workers. Methods: The study population included 834 cases and 1243 controls participating in a national medical screening program for older construction workers between 1997 and 2013. Qualitative exposure indices were developed based on lifetime work and exposure histories. Results: Approximately 18% (95%CI=2–24%) of COPD risk can be attributed to construction-related exposures, which are additive to the risk contributed by smoking. Amore » measure of all VGDF exposures combined was a strong predictor of COPD risk. Conclusions: Construction workers are at increased risk of COPD as a result of broad and complex effects of many exposures acting independently or interactively. Control methods should be implemented to prevent worker exposures, and smoking cessation should be promoted« less

A case-control study of airways obstruction among construction workers: Airways Obstruction Among Construction Workers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dement, John; Welch, Laura; Ringen, Knut

Background: While smoking is the major cause of chronic obstructive pulmonary disease (COPD), occupational exposures to vapors, gases, dusts, and fumes (VGDF) increase COPD risk. This case-control study estimated the risk of COPD attributable to occupational exposures among construction workers. Methods: The study population included 834 cases and 1243 controls participating in a national medical screening program for older construction workers between 1997 and 2013. Qualitative exposure indices were developed based on lifetime work and exposure histories. Results: Approximately 18% (95%CI=2–24%) of COPD risk can be attributed to construction-related exposures, which are additive to the risk contributed by smoking. Amore » measure of all VGDF exposures combined was a strong predictor of COPD risk. Conclusions: Construction workers are at increased risk of COPD as a result of broad and complex effects of many exposures acting independently or interactively. Control methods should be implemented to prevent worker exposures, and smoking cessation should be promoted« less

What do Demand-Control and Effort-Reward work stress questionnaires really measure? A discriminant content validity study of relevance and representativeness of measures.

PubMed

Bell, Cheryl; Johnston, Derek; Allan, Julia; Pollard, Beth; Johnston, Marie

2017-05-01

The Demand-Control (DC) and Effort-Reward Imbalance (ERI) models predict health in a work context. Self-report measures of the four key constructs (demand, control, effort, and reward) have been developed and it is important that these measures have good content validity uncontaminated by content from other constructs. We assessed relevance (whether items reflect the constructs) and representativeness (whether all aspects of the construct are assessed, and all items contribute to that assessment) across the instruments and items. Two studies examined fourteen demand/control items from the Job Content Questionnaire and seventeen effort/reward items from the Effort-Reward Imbalance measure using discriminant content validation and a third study developed new methods to assess instrument representativeness. Both methods use judges' ratings and construct definitions to get transparent quantitative estimates of construct validity. Study 1 used dictionary definitions while studies 2 and 3 used published phrases to define constructs. Overall, 3/5 demand items, 4/9 control items, 1/6 effort items, and 7/11 reward items were uniquely classified to the appropriate theoretical construct and were therefore 'pure' items with discriminant content validity (DCV). All pure items measured a defining phrase. However, both the DC and ERI assessment instruments failed to assess all defining aspects. Finding good discriminant content validity for demand and reward measures means these measures are usable and our quantitative results can guide item selection. By contrast, effort and control measures had limitations (in relevance and representativeness) presenting a challenge to the implementation of the theories. Statement of contribution What is already known on this subject? While the reliability and construct validity of Demand-Control and Effort-Reward-Imbalance (DC and ERI) work stress measures are routinely reported, there has not been adequate investigation of their content validity. This paper investigates their content validity in terms of both relevance and representativeness and provides a model for the investigation of content validity of measures in health psychology more generally. What does this study add? A new application of an existing method, discriminant content validity, and a new method of assessing instrument representativeness. 'Pure' DC and ERI items are identified, as are constructs that are not fully represented by their assessment instruments. The findings are important for studies attempting to distinguish between the main DC and ERI work stress constructs. The quantitative results can be used to guide item selection for future studies. © 2017 The British Psychological Society.

The method of selecting an integrated development territory for the high-rise unique constructions

NASA Astrophysics Data System (ADS)

Sheina, Svetlana; Shevtsova, Elina; Sukhinin, Alexander; Priss, Elena

2018-03-01

On the basis of data provided by the Department of architecture and urban planning of the city of Rostov-on-don, the problem of the choice of the territory for complex development that will be in priority for the construction of high-rise and unique buildings is solved. The objective of the study was the development of a methodology for selection of the area and the implementation of the proposed method on the example of evaluation of four-territories complex development. The developed method along with standard indicators of complex evaluation considers additional indicators that assess the territory from the position of high-rise unique building. The final result of the study is the rankings of the functional priority areas that takes into account the construction of both residential and public and business objects of unique high-rise construction. The use of the developed methodology will allow investors and customers to assess the investment attractiveness of the future unique construction project on the proposed site.

Study of a pipe-scanning robot for use in post-construction evaluation during horizontal directional drilling.

DOT National Transportation Integrated Search

2015-06-01

Trenchless Technology has become an increasingly popular underground utility construction method, beginning in : the early 1900s with pipe jacking beneath railroad lines. One method, horizontal directional drilling (HDD), became : more common in the ...

SALP, a new single-stranded DNA library preparation method especially useful for the high-throughput characterization of chromatin openness states.

PubMed

Wu, Jian; Dai, Wei; Wu, Lin; Wang, Jinke

2018-02-13

Next-generation sequencing (NGS) is fundamental to the current biological and biomedical research. Construction of sequencing library is a key step of NGS. Therefore, various library construction methods have been explored. However, the current methods are still limited by some shortcomings. This study developed a new NGS library construction method, Single strand Adaptor Library Preparation (SALP), by using a novel single strand adaptor (SSA). SSA is a double-stranded oligonucleotide with a 3' overhang of 3 random nucleotides, which can be efficiently ligated to the 3' end of single strand DNA by T4 DNA ligase. SALP can be started with any denatured DNA fragments such as those sheared by Tn5 tagmentation, enzyme digestion and sonication. When started with Tn5-tagmented chromatin, SALP can overcome a key limitation of ATAC-seq and become a high-throughput NGS library construction method, SALP-seq, which can be used to comparatively characterize the chromatin openness state of multiple cells unbiasly. In this way, this study successfully characterized the comparative chromatin openness states of four different cell lines, including GM12878, HepG2, HeLa and 293T, with SALP-seq. Similarly, this study also successfully characterized the chromatin openness states of HepG2 cells with SALP-seq by using 10 5 to 500 cells. This study developed a new NGS library construction method, SALP, by using a novel kind of single strand adaptor (SSA), which should has wide applications in the future due to its unique performance.

Social construction of the patient through problems of safety, uninsurance, and unequal treatment.

PubMed

Trigg, Lisa J

2009-01-01

The purpose of this research was to study how the Institute of Medicine discourse promoting health information technology may reproduce existing social inequalities in healthcare. Social constructionist and critical discourse analysis combined with corpus linguistics methods have been used to study the subject positions constructed for receivers of healthcare across the executive summaries of 3 different Institute of Medicine reports. Data analysis revealed differences in the way receivers of healthcare are constructed through variations of social action through language use in the 3 texts selected for this method's testing.

Optimizing the construction of devices to control inaccesible surfaces - case study

NASA Astrophysics Data System (ADS)

Niţu, E. L.; Costea, A.; Iordache, M. D.; Rizea, A. D.; Babă, Al

2017-10-01

The modern concept for the evolution of manufacturing systems requires multi-criteria optimization of technological processes and equipments, prioritizing associated criteria according to their importance. Technological preparation of the manufacturing can be developed, depending on the volume of production, to the limit of favourable economical effects related to the recovery of the costs for the design and execution of the technological equipment. Devices, as subsystems of the technological system, in the general context of modernization and diversification of machines, tools, semi-finished products and drives, are made in a multitude of constructive variants, which in many cases do not allow their identification, study and improvement. This paper presents a case study in which the multi-criteria analysis of some structures, based on a general optimization method, of novelty character, is used in order to determine the optimal construction variant of a control device. The rational construction of the control device confirms that the optimization method and the proposed calculation methods are correct and determine a different system configuration, new features and functions, and a specific method of working to control inaccessible surfaces.

Constructive and Destructive Marital Conflict, Emotional Security and Children's Prosocial Behavior

ERIC Educational Resources Information Center

McCoy, Kathleen; Cummings, E. Mark; Davies, Patrick T.

2009-01-01

Background: This study addresses the gaps in understanding the relationship between constructive and destructive marital conflict and children's prosocial behavior from a process-oriented perspective. Method: Data were drawn from a three-wave study of 235 families with children ages 5-7 at wave 1. Relations between constructive and destructive…

Systematic Review of Methods in Low-Consensus Fields: Supporting Commensuration through `Construct-Centered Methods Aggregation' in the Case of Climate Change Vulnerability Research.

PubMed

Delaney, Aogán; Tamás, Peter A; Crane, Todd A; Chesterman, Sabrina

2016-01-01

There is increasing interest in using systematic review to synthesize evidence on the social and environmental effects of and adaptations to climate change. Use of systematic review for evidence in this field is complicated by the heterogeneity of methods used and by uneven reporting. In order to facilitate synthesis of results and design of subsequent research a method, construct-centered methods aggregation, was designed to 1) provide a transparent, valid and reliable description of research methods, 2) support comparability of primary studies and 3) contribute to a shared empirical basis for improving research practice. Rather than taking research reports at face value, research designs are reviewed through inductive analysis. This involves bottom-up identification of constructs, definitions and operationalizations; assessment of concepts' commensurability through comparison of definitions; identification of theoretical frameworks through patterns of construct use; and integration of transparently reported and valid operationalizations into ideal-type research frameworks. Through the integration of reliable bottom-up inductive coding from operationalizations and top-down coding driven from stated theory with expert interpretation, construct-centered methods aggregation enabled both resolution of heterogeneity within identically named constructs and merging of differently labeled but identical constructs. These two processes allowed transparent, rigorous and contextually sensitive synthesis of the research presented in an uneven set of reports undertaken in a heterogenous field. If adopted more broadly, construct-centered methods aggregation may contribute to the emergence of a valid, empirically-grounded description of methods used in primary research. These descriptions may function as a set of expectations that improves the transparency of reporting and as an evolving comprehensive framework that supports both interpretation of existing and design of future research.

Systematic Review of Methods in Low-Consensus Fields: Supporting Commensuration through `Construct-Centered Methods Aggregation’ in the Case of Climate Change Vulnerability Research

PubMed Central

Crane, Todd A.; Chesterman, Sabrina

2016-01-01

There is increasing interest in using systematic review to synthesize evidence on the social and environmental effects of and adaptations to climate change. Use of systematic review for evidence in this field is complicated by the heterogeneity of methods used and by uneven reporting. In order to facilitate synthesis of results and design of subsequent research a method, construct-centered methods aggregation, was designed to 1) provide a transparent, valid and reliable description of research methods, 2) support comparability of primary studies and 3) contribute to a shared empirical basis for improving research practice. Rather than taking research reports at face value, research designs are reviewed through inductive analysis. This involves bottom-up identification of constructs, definitions and operationalizations; assessment of concepts’ commensurability through comparison of definitions; identification of theoretical frameworks through patterns of construct use; and integration of transparently reported and valid operationalizations into ideal-type research frameworks. Through the integration of reliable bottom-up inductive coding from operationalizations and top-down coding driven from stated theory with expert interpretation, construct-centered methods aggregation enabled both resolution of heterogeneity within identically named constructs and merging of differently labeled but identical constructs. These two processes allowed transparent, rigorous and contextually sensitive synthesis of the research presented in an uneven set of reports undertaken in a heterogenous field. If adopted more broadly, construct-centered methods aggregation may contribute to the emergence of a valid, empirically-grounded description of methods used in primary research. These descriptions may function as a set of expectations that improves the transparency of reporting and as an evolving comprehensive framework that supports both interpretation of existing and design of future research. PMID:26901409

Do Two or More Multicomponent Instruments Measure the Same Construct? Testing Construct Congruence Using Latent Variable Modeling

ERIC Educational Resources Information Center

Raykov, Tenko; Marcoulides, George A.; Tong, Bing

2016-01-01

A latent variable modeling procedure is discussed that can be used to test if two or more homogeneous multicomponent instruments with distinct components are measuring the same underlying construct. The method is widely applicable in scale construction and development research and can also be of special interest in construct validation studies.…

3D-Web-GIS RFID location sensing system for construction objects.

PubMed

Ko, Chien-Ho

2013-01-01

Construction site managers could benefit from being able to visualize on-site construction objects. Radio frequency identification (RFID) technology has been shown to improve the efficiency of construction object management. The objective of this study is to develop a 3D-Web-GIS RFID location sensing system for construction objects. An RFID 3D location sensing algorithm combining Simulated Annealing (SA) and a gradient descent method is proposed to determine target object location. In the algorithm, SA is used to stabilize the search process and the gradient descent method is used to reduce errors. The locations of the analyzed objects are visualized using the 3D-Web-GIS system. A real construction site is used to validate the applicability of the proposed method, with results indicating that the proposed approach can provide faster, more accurate, and more stable 3D positioning results than other location sensing algorithms. The proposed system allows construction managers to better understand worksite status, thus enhancing managerial efficiency.

3D-Web-GIS RFID Location Sensing System for Construction Objects

PubMed Central

2013-01-01

Construction site managers could benefit from being able to visualize on-site construction objects. Radio frequency identification (RFID) technology has been shown to improve the efficiency of construction object management. The objective of this study is to develop a 3D-Web-GIS RFID location sensing system for construction objects. An RFID 3D location sensing algorithm combining Simulated Annealing (SA) and a gradient descent method is proposed to determine target object location. In the algorithm, SA is used to stabilize the search process and the gradient descent method is used to reduce errors. The locations of the analyzed objects are visualized using the 3D-Web-GIS system. A real construction site is used to validate the applicability of the proposed method, with results indicating that the proposed approach can provide faster, more accurate, and more stable 3D positioning results than other location sensing algorithms. The proposed system allows construction managers to better understand worksite status, thus enhancing managerial efficiency. PMID:23864821

The biomechanics of plate fixation of periprosthetic femoral fractures near the tip of a total hip implant: cables, screws, or both?

PubMed

Shah, S; Kim, S Y R; Dubov, A; Schemitsch, E H; Bougherara, H; Zdero, R

2011-09-01

Femoral shaft fractures after total hip arthroplasty (THA) remain a serious problem, since there is no optimal surgical repair method. Virtually all studies that examined surgical repair methods have done so clinically or experimentally. The present study assessed injury patterns computationally by developing three-dimensional (3D) finite element (FE) models that were validated experimentally. The investigation evaluated three different constructs for the fixation of Vancouver B1 periprosthetic femoral shaft fractures following THA. Experimentally, three bone plate repair methods were applied to a synthetic femur with a 5 mm fracture gap near the tip of a total hip implant. Repair methods were identical distal to the fracture gap, but used cables only (construct A), screws only (construct B), or cables plus screws (construct C) proximal to the fracture gap. Specimens were oriented in 15 degrees adduction to simulate the single-legged stance phase of walking, subjected to 1000 N of axial force, and instrumented with strain gauges. Computationally, a linearly elastic and isotropic 3D FE model was developed to mimic experiments. Results showed excellent agreement between experimental and FE strains, yielding a Pearson linearity coefficient, R2, of 0.92 and a slope for the line of best data fit of 1.06. FE-computed axial stiffnesses were 768 N/mm (construct A), 1023 N/mm (construct B), and 1102 N/mm (construct C). FE surfaces stress maps for cortical bone showed Von Mises stresses, excluding peaks, of 0-8 MPa (construct A), 0-15 MPa (construct B), and 0-20 MPa (construct C). Cables absorbed the majority of load, followed by the plates and then the screws. Construct A yielded peak stress at one of the empty holes in the plate. Constructs B and C had similar bone stress patterns, and can achieve optimal fixation.

Space construction base control system

NASA Technical Reports Server (NTRS)

Kaczynski, R. F.

1979-01-01

Several approaches for an attitude control system are studied and developed for a large space construction base that is structurally flexible. Digital simulations were obtained using the following techniques: (1) the multivariable Nyquist array method combined with closed loop pole allocation, (2) the linear quadratic regulator method. Equations for the three-axis simulation using the multilevel control method were generated and are presented. Several alternate control approaches are also described. A technique is demonstrated for obtaining the dynamic structural properties of a vehicle which is constructed of two or more submodules of known dynamic characteristics.

A STUDY ON IMPLEMENTATION OF PROCUREMENT MANAGEMENT METHOD THAT DELIVERLY'S UNCERTAINTY OF EQUIPMENTS, MATERIALS AND INSTRUCTIONS

NASA Astrophysics Data System (ADS)

Asaine, Keita; Asaine, Wataru; Shiratsuchi, Ryoma; Yoshida, Takaichi; Hashimoto, Masaaki

This paper highlights the issues of procurement management in construction projects, such as late delivery of purchased equipments/materials and missing instructions from customers, which cause delays of construction schedule and over-budget cost. We point that most of these problems are caused by lack of synchronization between procurement activities and process control. Therefore, we propose a managerial method which enables better synchronization between the two by applying this method to a construction company. We discuss the necessary conditions and validity of incorporating it and show the way how to establish the mechanics through the case study. Furthermore, we analyze that the feature of this method is not only addressing procurement issues but also bringing additional benefits, such as shortening project lead time and reducing project cost.

Confidence in Altman-Bland plots: a critical review of the method of differences.

PubMed

Ludbrook, John

2010-02-01

1. Altman and Bland argue that the virtue of plotting differences against averages in method-comparison studies is that 95% confidence limits for the differences can be constructed. These allow authors and readers to judge whether one method of measurement could be substituted for another. 2. The technique is often misused. So I have set out, by statistical argument and worked examples, to advise pharmacologists and physiologists how best to construct these limits. 3. First, construct a scattergram of differences on averages, then calculate the line of best fit for the linear regression of differences on averages. If the slope of the regression is shown to differ from zero, there is proportional bias. 4. If there is no proportional bias and if the scatter of differences is uniform (homoscedasticity), construct 'classical' 95% confidence limits. 5. If there is proportional bias yet homoscedasticity, construct hyperbolic 95% confidence limits (prediction interval) around the line of best fit. 6. If there is proportional bias and the scatter of values for differences increases progressively as the average values increase (heteroscedasticity), log-transform the raw values from the two methods and replot differences against averages. If this eliminates proportional bias and heteroscedasticity, construct 'classical' 95% confidence limits. Otherwise, construct horizontal V-shaped 95% confidence limits around the line of best fit of differences on averages or around the weighted least products line of best fit to the original data. 7. In designing a method-comparison study, consult a qualified biostatistician, obey the rules of randomization and make replicate observations.

Geological Prediction Ahead of Tunnel Face in the Limestone Formation Tunnel using Multi-Modal Geophysical Surveys

NASA Astrophysics Data System (ADS)

Zaki, N. F. M.; Ismail, M. A. M.; Hazreek Zainal Abidin, Mohd; Madun, Aziman

2018-04-01

Tunnel construction in typical karst topography face the risk which unknown geological condition such as abundant rainwater, ground water and cavities. Construction of tunnel in karst limestone frequently lead to potentially over-break of rock formation and cause failure to affected area. Physical character of limestone which consists large cavity prone to sudden failure and become worsen due to misinterpretation of rock quality by engineer and geologists during analysis stage and improper method adopted in construction stage. Consideration for execution of laboratory and field testing in rock limestone should be well planned and arranged in tunnel construction project. Several tests including Ground Penetration Radar (GPR) and geological face mapping were studied in this research to investigate the performances of limestone rock in tunnel construction, measured in term of rock mass quality that used for risk assessment. The objective of this study is to focus on the prediction of geological condition ahead of tunnel face using short range method (GPR) and verified by geological face mapping method to determine the consistency of actual geological condition on site. Q-Value as the main indicator for rock mass classification was obtained from geological face mapping method. The scope of this study is covering for tunnelling construction along 756 meters in karst limestone area which located at Timah Tasoh Tunnel, Bukit Tebing Tinggi, Perlis. For this case study, 15% of GPR results was identified as inaccurate for rock mass classification in which certain chainage along this tunnel with 34 out of 224 data from GPR was identified as incompatible with actual face mapping.

Key Techniques and Risk Management for the Application of the Pile-Beam-Arch (PBA) Excavation Method: A Case Study of the Zhongjie Subway Station

PubMed Central

Guan, Yong-ping; Zhao, Wen; Li, Shen-gang; Zhang, Guo-bin

2014-01-01

The design and construction of shallow-buried tunnels in densely populated urban areas involve many challenges. The ground movements induced by tunneling effects pose potential risks to infrastructure such as surface buildings, pipelines, and roads. In this paper, a case study of the Zhongjie subway station located in Shenyang, China, is examined to investigate the key construction techniques and the influence of the Pile-Beam-Arch (PBA) excavation method on the surrounding environment. This case study discusses the primary risk factors affecting the environmental safety and summarizes the corresponding risk mitigation measures and key techniques for subway station construction using the PBA excavation method in a densely populated urban area. PMID:25221783

Novel imaging analysis system to measure the spatial dimension of engineered tissue construct.

PubMed

Choi, Kyoung-Hwan; Yoo, Byung-Su; Park, So Ra; Choi, Byung Hyune; Min, Byoung-Hyun

2010-02-01

The measurement of the spatial dimensions of tissue-engineered constructs is very important for their clinical applications. In this study, a novel method to measure the volume of tissue-engineered constructs was developed using iterative mathematical computations. The method measures and analyzes three-dimensional (3D) parameters of a construct to estimate its actual volume using a sequence of software-based mathematical algorithms. The mathematical algorithm is composed of two stages: the shape extraction and the determination of volume. The shape extraction utilized 3D images of a construct: length, width, and thickness, captured by a high-quality camera with charge coupled device. The surface of the 3D images was then divided into fine sections. The area of each section was measured and combined to obtain the total surface area. The 3D volume of the target construct was then mathematically obtained using its total surface area and thickness. The accuracy of the measurement method was verified by comparing the results with those obtained from the hydrostatic weighing method (Korea Research Institute of Standards and Science [KRISS], Korea). The mean difference in volume between two methods was 0.0313 +/- 0.0003% (n = 5, P = 0.523) with no significant statistical difference. In conclusion, our image-based spatial measurement system is a reliable and easy method to obtain an accurate 3D volume of a tissue-engineered construct.

Efficient dynamic graph construction for inductive semi-supervised learning.

PubMed

Dornaika, F; Dahbi, R; Bosaghzadeh, A; Ruichek, Y

2017-10-01

Most of graph construction techniques assume a transductive setting in which the whole data collection is available at construction time. Addressing graph construction for inductive setting, in which data are coming sequentially, has received much less attention. For inductive settings, constructing the graph from scratch can be very time consuming. This paper introduces a generic framework that is able to make any graph construction method incremental. This framework yields an efficient and dynamic graph construction method that adds new samples (labeled or unlabeled) to a previously constructed graph. As a case study, we use the recently proposed Two Phase Weighted Regularized Least Square (TPWRLS) graph construction method. The paper has two main contributions. First, we use the TPWRLS coding scheme to represent new sample(s) with respect to an existing database. The representative coefficients are then used to update the graph affinity matrix. The proposed method not only appends the new samples to the graph but also updates the whole graph structure by discovering which nodes are affected by the introduction of new samples and by updating their edge weights. The second contribution of the article is the application of the proposed framework to the problem of graph-based label propagation using multiple observations for vision-based recognition tasks. Experiments on several image databases show that, without any significant loss in the accuracy of the final classification, the proposed dynamic graph construction is more efficient than the batch graph construction. Copyright © 2017 Elsevier Ltd. All rights reserved.

Investigating risk factors for slips, trips and falls in New Zealand residential construction using incident-centred and incident-independent methods.

PubMed

Bentley, Tim A; Hide, Sophie; Tappin, David; Moore, Dave; Legg, Stephen; Ashby, Liz; Parker, Richard

2006-01-15

Slip, trip and fall (STF) incidents, particularly falls from a height, are a leading cause of injury in the New Zealand residential construction industry. The most common origins of falls from a height in this sector are ladders, scaffolding and roofs, while slipping is the most frequent fall initiating event category. The study aimed to provide detailed information on construction industry STF risk factors for high-risk tasks, work equipment and environments, as identified from an earlier analysis of STF claims data, together with information to be used in the development of interventions to reduce STF risk in New Zealand residential construction. The study involved the use of both incident-centred and incident-independent methods of investigation, including detailed follow-up investigations of incidents and observations and interviews with workers on construction sites, to provide data on a wide range of risk factors. A large number of risk factors for residential construction STFs were identified, including factors related to the work environment, tasks and the use and availability of appropriate height work equipment. The different methods of investigation produced complementary information on factors related to equipment design and work organization, which underlie some of the site conditions and work practices identified as key risk factors for residential construction STFs. A conceptual systems model of residential construction STF risk is presented.

One-step assembly and targeted integration of multigene constructs assisted by the I-SceI meganuclease in Saccharomyces cerevisiae

PubMed Central

Kuijpers, Niels GA; Chroumpi, Soultana; Vos, Tim; Solis-Escalante, Daniel; Bosman, Lizanne; Pronk, Jack T; Daran, Jean-Marc; Daran-Lapujade, Pascale

2013-01-01

In vivo assembly of overlapping fragments by homologous recombination in Saccharomyces cerevisiae is a powerful method to engineer large DNA constructs. Whereas most in vivo assembly methods reported to date result in circular vectors, stable integrated constructs are often preferred for metabolic engineering as they are required for large-scale industrial application. The present study explores the potential of combining in vivo assembly of large, multigene expression constructs with their targeted chromosomal integration in S. cerevisiae. Combined assembly and targeted integration of a ten-fragment 22-kb construct to a single chromosomal locus was successfully achieved in a single transformation process, but with low efficiency (5% of the analyzed transformants contained the correctly assembled construct). The meganuclease I-SceI was therefore used to introduce a double-strand break at the targeted chromosomal locus, thus to facilitate integration of the assembled construct. I-SceI-assisted integration dramatically increased the efficiency of assembly and integration of the same construct to 95%. This study paves the way for the fast, efficient, and stable integration of large DNA constructs in S. cerevisiae chromosomes. PMID:24028550

The communicative construction of safety in wildland firefighting

Treesearch

Jody Jahn; Linda L. Putnam; Anne E. Black

2012-01-01

This document is a summary of a mixed methods dissertation that examined the communicative construction of safety in wildland firefighting. For the dissertation, I used a two-study mixed methods approach, examining the communicative accomplishment of safety from two perspectives: high reliability organizing (Weick, Sutcliffe, & Obstfeld, 1999), and safety climate (...

Analysis of labour accidents in tunnel construction and introduction of prevention measures

PubMed Central

KIKKAWA, Naotaka; ITOH, Kazuya; HORI, Tomohito; TOYOSAWA, Yasuo; ORENSE, Rolando P.

2015-01-01

At present, almost all mountain tunnels in Japan are excavated and constructed utilizing the New Austrian Tunneling Method (NATM), which was advocated by Prof. Rabcewicz of Austria in 1964. In Japan, this method has been applied to tunnel construction since around 1978, after which there has been a subsequent decrease in the number of casualties during tunnel construction. However, there is still a relatively high incidence of labour accidents during tunnel construction when compared to incidence rates in the construction industry in general. During tunnel construction, rock fall events at the cutting face are a particularly characteristic of the type of accident that occurs. In this study, we analysed labour accidents that possess the characteristics of a rock fall event at a work site. We also introduced accident prevention measures against rock fall events. PMID:26027707

Analysis of labour accidents in tunnel construction and introduction of prevention measures.

PubMed

Kikkawa, Naotaka; Itoh, Kazuya; Hori, Tomohito; Toyosawa, Yasuo; Orense, Rolando P

2015-01-01

At present, almost all mountain tunnels in Japan are excavated and constructed utilizing the New Austrian Tunneling Method (NATM), which was advocated by Prof. Rabcewicz of Austria in 1964. In Japan, this method has been applied to tunnel construction since around 1978, after which there has been a subsequent decrease in the number of casualties during tunnel construction. However, there is still a relatively high incidence of labour accidents during tunnel construction when compared to incidence rates in the construction industry in general. During tunnel construction, rock fall events at the cutting face are a particularly characteristic of the type of accident that occurs. In this study, we analysed labour accidents that possess the characteristics of a rock fall event at a work site. We also introduced accident prevention measures against rock fall events.

Repair of Segmental Bone Defect Using Totally Vitalized Tissue Engineered Bone Graft by a Combined Perfusion Seeding and Culture System

PubMed Central

Feng, Ya-Fei; Li, Xiang; Hu, Yun-Yu; Wang, Zhen; Ma, Zhen-Sheng; Lei, Wei

2014-01-01

Background The basic strategy to construct tissue engineered bone graft (TEBG) is to combine osteoblastic cells with three dimensional (3D) scaffold. Based on this strategy, we proposed the “Totally Vitalized TEBG” (TV-TEBG) which was characterized by abundant and homogenously distributed cells with enhanced cell proliferation and differentiation and further investigated its biological performance in repairing segmental bone defect. Methods In this study, we constructed the TV-TEBG with the combination of customized flow perfusion seeding/culture system and β-tricalcium phosphate (β-TCP) scaffold fabricated by Rapid Prototyping (RP) technique. We systemically compared three kinds of TEBG constructed by perfusion seeding and perfusion culture (PSPC) method, static seeding and perfusion culture (SSPC) method, and static seeding and static culture (SSSC) method for their in vitro performance and bone defect healing efficacy with a rabbit model. Results Our study has demonstrated that TEBG constructed by PSPC method exhibited better biological properties with higher daily D-glucose consumption, increased cell proliferation and differentiation, and better cell distribution, indicating the successful construction of TV-TEBG. After implanted into rabbit radius defects for 12 weeks, PSPC group exerted higher X-ray score close to autograft, much greater mechanical property evidenced by the biomechanical testing and significantly higher new bone formation as shown by histological analysis compared with the other two groups, and eventually obtained favorable healing efficacy of the segmental bone defect that was the closest to autograft transplantation. Conclusion This study demonstrated the feasibility of TV-TEBG construction with combination of perfusion seeding, perfusion culture and RP technique which exerted excellent biological properties. The application of TV-TEBG may become a preferred candidate for segmental bone defect repair in orthopedic and maxillofacial fields. PMID:24728277

Renal cortex segmentation using optimal surface search with novel graph construction.

PubMed

Li, Xiuli; Chen, Xinjian; Yao, Jianhua; Zhang, Xing; Tian, Jie

2011-01-01

In this paper, we propose a novel approach to solve the renal cortex segmentation problem, which has rarely been studied. In this study, the renal cortex segmentation problem is handled as a multiple-surfaces extraction problem, which is solved using the optimal surface search method. We propose a novel graph construction scheme in the optimal surface search to better accommodate multiple surfaces. Different surface sub-graphs are constructed according to their properties, and inter-surface relationships are also modeled in the graph. The proposed method was tested on 17 clinical CT datasets. The true positive volume fraction (TPVF) and false positive volume fraction (FPVF) are 74.10% and 0.08%, respectively. The experimental results demonstrate the effectiveness of the proposed method.

Lunar-base construction equipment and methods evaluation

NASA Technical Reports Server (NTRS)

Boles, Walter W.; Ashley, David B.; Tucker, Richard L.

1993-01-01

A process for evaluating lunar-base construction equipment and methods concepts is presented. The process is driven by the need for more quantitative, systematic, and logical methods for assessing further research and development requirements in an area where uncertainties are high, dependence upon terrestrial heuristics is questionable, and quantitative methods are seldom applied. Decision theory concepts are used in determining the value of accurate information and the process is structured as a construction-equipment-and-methods selection methodology. Total construction-related, earth-launch mass is the measure of merit chosen for mathematical modeling purposes. The work is based upon the scope of the lunar base as described in the National Aeronautics and Space Administration's Office of Exploration's 'Exploration Studies Technical Report, FY 1989 Status'. Nine sets of conceptually designed construction equipment are selected as alternative concepts. It is concluded that the evaluation process is well suited for assisting in the establishment of research agendas in an approach that is first broad, with a low level of detail, followed by more-detailed investigations into areas that are identified as critical due to high degrees of uncertainty and sensitivity.

Construction Method of Analytical Solutions to the Mathematical Physics Boundary Problems for Non-Canonical Domains

NASA Astrophysics Data System (ADS)

Mobarakeh, Pouyan Shakeri; Grinchenko, Victor T.

2015-06-01

The majority of practical cases of acoustics problems requires solving the boundary problems in non-canonical domains. Therefore construction of analytical solutions of mathematical physics boundary problems for non-canonical domains is both lucrative from the academic viewpoint, and very instrumental for elaboration of efficient algorithms of quantitative estimation of the field characteristics under study. One of the main solving ideologies for such problems is based on the superposition method that allows one to analyze a wide class of specific problems with domains which can be constructed as the union of canonically-shaped subdomains. It is also assumed that an analytical solution (or quasi-solution) can be constructed for each subdomain in one form or another. However, this case implies some difficulties in the construction of calculation algorithms, insofar as the boundary conditions are incompletely defined in the intervals, where the functions appearing in the general solution are orthogonal to each other. We discuss several typical examples of problems with such difficulties, we study their nature and identify the optimal methods to overcome them.

Preliminary study for understanding the moderating role of government regulations in telecom sector of Pakistan

NASA Astrophysics Data System (ADS)

Tariq, Beenish; Mat, Nik Kamariah Nik

2017-10-01

Telecommunication sector of Pakistan is a significant contributor toward the economic development of Pakistan. However, telecommunication sector of Pakistan underwent a lot of changes from regulatory and marketing perspective in 2015, resulting in decreased cellular penetration, dropped down the cellular subscribers and decreased telecommunication revenue. Hence, this research paper is designed to validate the constructs used in addressing the moderating role of government regulations based on Oliver's four-stage loyalty model in telecom sector of Pakistan. This preliminary study has mainly employed the quantitative method (i.e. survey questionnaire), consisting of a total of 72 items related to eight constructs under study and used 7 points Likert scale. The main analysis method used is the reliability test of the constructs. The results reveal that the Cronbach alpha readings were between 0.756 and 0.932, indicating internally consistent and reliable measures of the constructs used. This result enables the constructs to be included in the actual data collection without change.

Monitoring sinew contraction during formation of tissue-engineered fibrin-based ligament constructs.

PubMed

Paxton, Jennifer Z; Wudebwe, Uchena N G; Wang, Anqi; Woods, Daniel; Grover, Liam M

2012-08-01

The ability to study the gross morphological changes occurring during tissue formation is vital to producing tissue-engineered structures of clinically relevant dimensions in vitro. Here, we have used nondestructive methods of digital imaging and optical coherence tomography to monitor the early-stage formation and subsequent maturation of fibrin-based tissue-engineered ligament constructs. In addition, the effect of supplementation with essential promoters of collagen synthesis, ascorbic acid (AA) and proline (P), has been assessed. Contraction of the cell-seeded fibrin gel occurs unevenly within the first 5 days of culture around two fixed anchor points before forming a longitudinal ligament-like construct. AA+P supplementation accelerates gel contraction in the maturation phase of development, producing ligament-like constructs with a higher collagen content and distinct morphology to that of unsupplemented constructs. These studies highlight the importance of being able to control the methods of tissue formation and maturation in vitro to enable the production of tissue-engineered constructs with suitable replacement tissue characteristics for repair of clinical soft-tissue injuries.

Results of Laboratory Tests of the Filtration Characteristics of Clay-Cement Concrete

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sol’skii, S. V., E-mail: solskiysv@vniig.ru; Lopatina, M. G., E-mail: LoptainaMG@vniig.ru; Legina, E. E.

Laboratory studies of the filtration characteristics of clay-cement concrete materials for constructing filtering diaphragms of earth dams by the method of secant piles are reported. Areas for further study aimed at improving the quality of construction, increasing operational safety, and developing a standards base for the design, construction, and operation of these systems are discussed.

Beyond Description in Interpersonal Construct Validation: Methodological Advances in the Circumplex Structural Summary Approach.

PubMed

Zimmermann, Johannes; Wright, Aidan G C

2017-01-01

The interpersonal circumplex is a well-established structural model that organizes interpersonal functioning within the two-dimensional space marked by dominance and affiliation. The structural summary method (SSM) was developed to evaluate the interpersonal nature of other constructs and measures outside the interpersonal circumplex. To date, this method has been primarily descriptive, providing no way to draw inferences when comparing SSM parameters across constructs or groups. We describe a newly developed resampling-based method for deriving confidence intervals, which allows for SSM parameter comparisons. In a series of five studies, we evaluated the accuracy of the approach across a wide range of possible sample sizes and parameter values, and demonstrated its utility for posing theoretical questions on the interpersonal nature of relevant constructs (e.g., personality disorders) using real-world data. As a result, the SSM is strengthened for its intended purpose of construct evaluation and theory building. © The Author(s) 2015.

Why conventional detection methods fail in identifying the existence of contamination events.

PubMed

Liu, Shuming; Li, Ruonan; Smith, Kate; Che, Han

2016-04-15

Early warning systems are widely used to safeguard water security, but their effectiveness has raised many questions. To understand why conventional detection methods fail to identify contamination events, this study evaluates the performance of three contamination detection methods using data from a real contamination accident and two artificial datasets constructed using a widely applied contamination data construction approach. Results show that the Pearson correlation Euclidean distance (PE) based detection method performs better for real contamination incidents, while the Euclidean distance method (MED) and linear prediction filter (LPF) method are more suitable for detecting sudden spike-like variation. This analysis revealed why the conventional MED and LPF methods failed to identify existence of contamination events. The analysis also revealed that the widely used contamination data construction approach is misleading. Copyright © 2016 Elsevier Ltd. All rights reserved.

Educational Methods as Commodities within European Education: A Norwegian-Danish Case

ERIC Educational Resources Information Center

Ottensen, Eli; Lund, Birthe; Grams, Sarah; Aas, Marit; Proitz, Tine Sophie

2013-01-01

A number of studies in the past few decades address how the governing of educational systems are changing as a result of intensified measurement and use of statistics. This article suggests that another consequence may be the construction of solutions, tools, and methods which target the problems constructed through comparable indicators and…

Mothers' Appraisal of Goodness of Fit and Children's Social Development

ERIC Educational Resources Information Center

Seifer, Ronald; Dickstein, Susan; Parade, Stephanie; Hayden, Lisa C.; Magee, Karin Dodge; Schiller, Masha

2014-01-01

Goodness of fit has been a key theoretical construct for understanding caregiver-child relationships. We developed an interview method to assess goodness of fit as a relationship construct, and employed this method in a longitudinal study of child temperament, family context, and attachment relationship formation. Goodness of fit at 4 and 8 months…

A Philosophical Perspective on Construct Validation: Application of Inductive Logic to the Analysis of Experimental Episode Construct Validity.

ERIC Educational Resources Information Center

Rossi, Robert Joseph

Methods drawn from four logical theories associated with studies of inductive processes are applied to the assessment and evaluation of experimental episode construct validity. It is shown that this application provides for estimates of episode informativeness with respect to the person examined in terms of the construct and to the construct…

7 CFR 1753.77 - Methods of minor construction.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 11 2011-01-01 2011-01-01 false Methods of minor construction. 1753.77 Section 1753..., DEPARTMENT OF AGRICULTURE TELECOMMUNICATIONS SYSTEM CONSTRUCTION POLICIES AND PROCEDURES Minor Construction § 1753.77 Methods of minor construction. Minor construction may be performed by contract using RUS...

23 CFR 635.104 - Method of construction.

Code of Federal Regulations, 2010 CFR

2010-04-01

... effectiveness is necessary in selecting projects for the design-build delivery method. [56 FR 37004, Aug. 2... 23 Highways 1 2010-04-01 2010-04-01 false Method of construction. 635.104 Section 635.104 Highways... CONSTRUCTION AND MAINTENANCE Contract Procedures § 635.104 Method of construction. (a) Actual construction work...

Necessary but Insufficient

PubMed Central

2017-01-01

Abstract Cross-national data production in social science research has increased dramatically in recent decades. Assessing the comparability of data is necessary before drawing substantive conclusions that are based on cross-national data. Researchers assessing data comparability typically use either quantitative methods such as multigroup confirmatory factor analysis or qualitative methods such as online probing. Because both methods have complementary strengths and weaknesses, this study applies both multigroup confirmatory factor analysis and online probing in a mixed-methods approach to assess the comparability of constructive patriotism and nationalism, two important concepts in the study of national identity. Previous measurement invariance tests failed to achieve scalar measurement invariance, which prohibits a cross-national comparison of latent means (Davidov 2009). The arrival of the 2013 ISSP Module on National Identity has encouraged a reassessment of both constructs and a push to understand why scalar invariance cannot be achieved. Using the example of constructive patriotism and nationalism, this study demonstrates how the combination of multigroup confirmatory factor analysis and online probing can uncover and explain issues related to cross-national comparability. PMID:28579643

Management system of health and safety work (SMK3) with job safety analysis (JSA) in PT. Nira Murni construction

NASA Astrophysics Data System (ADS)

Melliana, Armen, Yusrizal, Akmal, Syarifah

2017-11-01

PT Nira Murni construction is a contractor of PT Chevron Pacific Indonesia which engaged in contractor, fabrication, maintenance construction suppliers, and labor services. The high of accident rate in this company is caused the lack of awareness of workplace safety. Therefore, it requires an effort to reduce the accident rate on the company so that the financial losses can be minimized. In this study, Safe T-Score method is used to analyze the accident rate by measuring the level of frequency. Analysis is continued using risk management methods which identify hazards, risk measurement and risk management. The last analysis uses Job safety analysis (JSA) which will identify the effect of accidents. From the result of this study can be concluded that Job Safety Analysis (JSA) methods has not been implemented properly. Therefore, JSA method needs to follow-up in the next study, so that can be well applied as prevention of occupational accidents.

Dendrometer bands made easy: Using modified cable ties to measure incremental growth of trees1

PubMed Central

Anemaet, Evelyn R.; Middleton, Beth A.

2013-01-01

• Premise of the study: Dendrometer bands are a useful way to make sequential repeated measurements of tree growth, but traditional dendrometer bands can be expensive, time consuming, and difficult to construct in the field. An alternative to the traditional method of band construction is to adapt commercially available materials. This paper describes how to construct and install dendrometer bands using smooth-edged, stainless steel, cable tie banding and attachable rollerball heads. • Methods and Results: As a performance comparison, both traditional and cable tie dendrometer bands were installed on baldcypress trees at the National Wetlands Research Center in Lafayette, Louisiana, by both an experienced and a novice worker. Band installation times were recorded, and growth of the trees as estimated by the two band types was measured after approximately one year, demonstrating equivalence of the two methods. • Conclusions: This efficient approach to dendrometer band construction can help advance the knowledge of long-term tree growth in ecological studies. PMID:25202589

The Model Experiments and Finite Element Analysis on Deformation and Failure by Excavation of Grounds in Foregoing-roof Method

NASA Astrophysics Data System (ADS)

Sotokoba, Yasumasa; Okajima, Kenji; Iida, Toshiaki; Tanaka, Tadatsugu

We propose the trenchless box culvert construction method to construct box culverts in small covering soil layers while keeping roads or tracks open. When we use this construction method, it is necessary to clarify deformation and shear failure by excavation of grounds. In order to investigate the soil behavior, model experiments and elasto-plactic finite element analysis were performed. In the model experiments, it was shown that the shear failure was developed from the end of the roof to the toe of the boundary surface. In the finite element analysis, a shear band effect was introduced. Comparing the observed shear bands in model experiments with computed maximum shear strain contours, it was found that the observed direction of the shear band could be simulated reasonably by the finite element analysis. We may say that the finite element method used in this study is useful tool for this construction method.

Towards the estimation of effect measures in studies using respondent-driven sampling.

PubMed

Rotondi, Michael A

2014-06-01

Respondent-driven sampling (RDS) is an increasingly common sampling technique to recruit hidden populations. Statistical methods for RDS are not straightforward due to the correlation between individual outcomes and subject weighting; thus, analyses are typically limited to estimation of population proportions. This manuscript applies the method of variance estimates recovery (MOVER) to construct confidence intervals for effect measures such as risk difference (difference of proportions) or relative risk in studies using RDS. To illustrate the approach, MOVER is used to construct confidence intervals for differences in the prevalence of demographic characteristics between an RDS study and convenience study of injection drug users. MOVER is then applied to obtain a confidence interval for the relative risk between education levels and HIV seropositivity and current infection with syphilis, respectively. This approach provides a simple method to construct confidence intervals for effect measures in RDS studies. Since it only relies on a proportion and appropriate confidence limits, it can also be applied to previously published manuscripts.

[Construction of haplotype and haplotype block based on tag single nucleotide polymorphisms and their applications in association studies].

PubMed

Gu, Ming-liang; Chu, Jia-you

2007-12-01

Human genome has structures of haplotype and haplotype block which provide valuable information on human evolutionary history and may lead to the development of more efficient strategies to identify genetic variants that increase susceptibility to complex diseases. Haplotype block can be divided into discrete blocks of limited haplotype diversity. In each block, a small fraction of ptag SNPsq can be used to distinguish a large fraction of the haplotypes. These tag SNPs can be potentially useful for construction of haplotype and haplotype block, and association studies in complex diseases. There are two general classes of methods to construct haplotype and haplotype blocks based on genotypes on large pedigrees and statistical algorithms respectively. The author evaluate several construction methods to assess the power of different association tests with a variety of disease models and block-partitioning criteria. The advantages, limitations and applications of each method and the application in the association studies are discussed equitably. With the completion of the HapMap and development of statistical algorithms for addressing haplotype reconstruction, ideas of construction of haplotype based on combination of mathematics, physics, and computer science etc will have profound impacts on population genetics, location and cloning for susceptible genes in complex diseases, and related domain with life science etc.

Advanced stress analysis methods applicable to turbine engine structures

NASA Technical Reports Server (NTRS)

Pian, Theodore H. H.

1991-01-01

The following tasks on the study of advanced stress analysis methods applicable to turbine engine structures are described: (1) constructions of special elements which contain traction-free circular boundaries; (2) formulation of new version of mixed variational principles and new version of hybrid stress elements; (3) establishment of methods for suppression of kinematic deformation modes; (4) construction of semiLoof plate and shell elements by assumed stress hybrid method; and (5) elastic-plastic analysis by viscoplasticity theory using the mechanical subelement model.

A Constructive Teaching Model in Learning Research Concept for English Language Teaching Students

ERIC Educational Resources Information Center

Anwar, Khoirul

2015-01-01

This is a study to focus on analyzing the use of constructive teaching method toward the students' motivation in learning content subject of Introduction to Research of English Language Teaching. By using a mix-method of qualitative and quantitative analysis, the data are collected by using questionnaire and classroom observation. The…

Assessing Adolescents' Understanding of and Reactions to Stress in Different Cultures: Results of a Mixed-Methods Approach

ERIC Educational Resources Information Center

Nastasi, Bonnie K.; Hitchcock, John H.; Burkholder, Gary; Varjas, Kristen; Sarkar, Sreeroopa; Jayasena, Asoka

2007-01-01

This article expands on an emerging mixed-method approach for validating culturally-specific constructs (see Hitchcock et al., 2005). Previous work established an approach for dealing with cultural impacts when assessing psychological constructs and the current article extends these efforts into studying stress reactions among adolescents in Sri…

Literature review of the benefits and obstacle of horizontal directional drilling

NASA Astrophysics Data System (ADS)

Norizam, M. S. Mohd; Nuzul Azam, H.; Helmi Zulhaidi, S.; Aziz, A. Abdul; Nadzrol Fadzilah, A.

2017-11-01

In this new era the construction industry not only need to be completed within budget, timely, at acceptable quality and safety but the stakeholders especially the local authorities and the public realises for the important need of sustainable construction method to be used for our younger generation to heritage if not better a safer world for them to live and raise up their children’s. Horizontal Directional Drilling method is the most commonly recognised trenchless utilities method as a preferred construction method in this age. Among the reasons HDD method offers less disturbance on traffic, the public, business activities and neighbourhood, lower restoration cost, less noise, dust and minimum import/export of the construction materials. In addition HDD method can drill through congested utilities areas with minimum cutting and shorter time. This paper aims to appraise the benefits and obstacle of HDD method in construction industry. It is an endeavour to fulfil the local authorities cry for alternative method that less damages to the roads, road furniture’s and public complaints compared to the conventional open cut method. In addition HDD method is seem to be in line with sustainable development requirements e.g. reduce, reuse, recycle and etc. Hence, it is important to determine the benefits and obstacle factors of HDD implementation. The factors are based on the literature review conducted by the author on the subject matters gathered from previous studies, journals, text books, guidelines, magazine articles, newspaper cutting and etc.

Molecular activity prediction by means of supervised subspace projection based ensembles of classifiers.

PubMed

Cerruela García, G; García-Pedrajas, N; Luque Ruiz, I; Gómez-Nieto, M Á

2018-03-01

This paper proposes a method for molecular activity prediction in QSAR studies using ensembles of classifiers constructed by means of two supervised subspace projection methods, namely nonparametric discriminant analysis (NDA) and hybrid discriminant analysis (HDA). We studied the performance of the proposed ensembles compared to classical ensemble methods using four molecular datasets and eight different models for the representation of the molecular structure. Using several measures and statistical tests for classifier comparison, we observe that our proposal improves the classification results with respect to classical ensemble methods. Therefore, we show that ensembles constructed using supervised subspace projections offer an effective way of creating classifiers in cheminformatics.

Real-Time Safety Risk Assessment Based on a Real-Time Location System for Hydropower Construction Sites

PubMed Central

Fan, Qixiang; Qiang, Maoshan

2014-01-01

The concern for workers' safety in construction industry is reflected in many studies focusing on static safety risk identification and assessment. However, studies on real-time safety risk assessment aimed at reducing uncertainty and supporting quick response are rare. A method for real-time safety risk assessment (RTSRA) to implement a dynamic evaluation of worker safety states on construction site has been proposed in this paper. The method provides construction managers who are in charge of safety with more abundant information to reduce the uncertainty of the site. A quantitative calculation formula, integrating the influence of static and dynamic hazards and that of safety supervisors, is established to link the safety risk of workers with the locations of on-site assets. By employing the hidden Markov model (HMM), the RTSRA provides a mechanism for processing location data provided by the real-time location system (RTLS) and analyzing the probability distributions of different states in terms of false positives and negatives. Simulation analysis demonstrated the logic of the proposed method and how it works. Application case shows that the proposed RTSRA is both feasible and effective in managing construction project safety concerns. PMID:25114958

Real-time safety risk assessment based on a real-time location system for hydropower construction sites.

PubMed

Jiang, Hanchen; Lin, Peng; Fan, Qixiang; Qiang, Maoshan

2014-01-01

The concern for workers' safety in construction industry is reflected in many studies focusing on static safety risk identification and assessment. However, studies on real-time safety risk assessment aimed at reducing uncertainty and supporting quick response are rare. A method for real-time safety risk assessment (RTSRA) to implement a dynamic evaluation of worker safety states on construction site has been proposed in this paper. The method provides construction managers who are in charge of safety with more abundant information to reduce the uncertainty of the site. A quantitative calculation formula, integrating the influence of static and dynamic hazards and that of safety supervisors, is established to link the safety risk of workers with the locations of on-site assets. By employing the hidden Markov model (HMM), the RTSRA provides a mechanism for processing location data provided by the real-time location system (RTLS) and analyzing the probability distributions of different states in terms of false positives and negatives. Simulation analysis demonstrated the logic of the proposed method and how it works. Application case shows that the proposed RTSRA is both feasible and effective in managing construction project safety concerns.

Monitoring the Error Rate of Modern Methods of Construction Based on Wood

NASA Astrophysics Data System (ADS)

Švajlenka, Jozef; Kozlovská, Mária

2017-06-01

A range of new and innovative construction systems, currently developed, represent modern methods of construction (MMC), which has the ambition to improve the performance parameters of buildings throughout their life cycle. Regarding the implementation modern methods of construction in Slovakia, assembled buildings based on wood seem to be the most preferred construction system. In the study, presented in the paper, were searched already built and lived-in wood based family houses. The residents' attitudes to such type of buildings in the context with declared designing and qualitative parameters of efficiency and sustainability are overlooked. The methodology of the research study is based on the socio-economic survey carried out during the years 2015 - 2017 within the Slovak Republic. Due to the large extent of data collected through questionnaire, only selected parts of the survey results are evaluated and discussed in the paper. This paper is aimed at evaluating the quality of buildings expressed in a view of users of existing wooden buildings. Research indicates some defects, which can be eliminated in the next production process. Research indicates, that some defects occur, so the production process quality should be improved in the future development.

Potential implementation of light steel housing system for affordable housing project in Malaysia

NASA Astrophysics Data System (ADS)

Saikah, M.; Kasim, N.; Zainal, R.; Sarpin, N.; Rahim, M. H. I. A.

2017-11-01

An unparalleled number between housing demand and housing supply in Malaysia has increased the housing prices, which gives consequences to the homeownership issue. One way to reduce the housing price is by faster increase the number of affordable housing, but the construction sector faces difficulties in delivering as expected number by using conventional and current industrialised building system (IBS) due to the issue related high project cost, time and labour. Therefore, light steel housing (LSH) system as one of another type of IBS method can be utilised in housing construction project. This method can replace the conventional method that was currently used in the construction of affordable housing project. The objectives of this study are to identify the potential of LSH and influencing factors of system implementation. This is an initial stage to review the previous study related to LSH implementation in developed and developing countries. The previous study will be analysed regarding advantages and disadvantages of LSH and factors that influence the implementation of the system. Based on the literature review it is expected to define the potential and influencing factors of the LSH system. The findings are meaningful in framing and enhance construction housing method of an affordable housing project in Malaysia.

Reducing Physical Risk Factors in Construction Work Through a Participatory Intervention: Protocol for a Mixed-Methods Process Evaluation.

PubMed

Ajslev, Jeppe; Brandt, Mikkel; Møller, Jeppe Lykke; Skals, Sebastian; Vinstrup, Jonas; Jakobsen, Markus Due; Sundstrup, Emil; Madeleine, Pascal; Andersen, Lars Louis

2016-05-26

Previous research has shown that reducing physical workload among workers in the construction industry is complicated. In order to address this issue, we developed a process evaluation in a formative mixed-methods design, drawing on existing knowledge of the potential barriers for implementation. We present the design of a mixed-methods process evaluation of the organizational, social, and subjective practices that play roles in the intervention study, integrating technical measurements to detect excessive physical exertion measured with electromyography and accelerometers, video documentation of working tasks, and a 3-phased workshop program. The evaluation is designed in an adapted process evaluation framework, addressing recruitment, reach, fidelity, satisfaction, intervention delivery, intervention received, and context of the intervention companies. Observational studies, interviews, and questionnaires among 80 construction workers organized in 20 work gangs, as well as health and safety staff, contribute to the creation of knowledge about these phenomena. At the time of publication, the process of participant recruitment is underway. Intervention studies are challenging to conduct and evaluate in the construction industry, often because of narrow time frames and ever-changing contexts. The mixed-methods design presents opportunities for obtaining detailed knowledge of the practices intra-acting with the intervention, while offering the opportunity to customize parts of the intervention.

Risk Evaluation of Construction Workers' Exposure to Silica Dust and the Possible Lung Function Impairments.

PubMed

Tavakol, Elahe; Azari, Mansour; Zendehdel, Rezvan; Salehpour, Sousan; Khodakrim, Soheila; Nikoo, Saeed; Saranjam, Behzad

2017-06-01

Aerosols generated during construction activities are an integral part of building operations. Considering the nature of materials used in construction activities, respirable dust contains crystalline silica and particulates not otherwise specified (PNOS). Due to lack of data regarding the occupational health status of Iranian construction workers, the objective of this study was to evaluate occupational exposure to silica and to examine their respiratory health status. In this cross sectional study, 85 construction workers and 40 controls (without active exposure to construction dust) were studied. The workers' exposure to PNOS and silica aerosols was monitored by the NIOSH method No.0600 and a new Fourier transform infrared spectroscopy (FTIR)-based method, respectively. All subjects were also monitored for lung function parameters, such as forced expiratory volume/forced vital capacity (FEV 1 /FVC), peak expiratory flow rate (PEFR), forced expiratory flow (FEF 25-75 ), FVC, and FEV 1 . The mean exposure of workers to respirable PNOS and silica was 9.8 (0.35) and 0.13 (0.019) mg/m 3 , respectively. The groups of construction workers showed significant differences in exposure to PNOS ( P < 0.001) and silica ( P = 0.007). The mean pulmonary function parameters, including FEV 1 % and FVC%, were significantly lower among construction workers, compared to the control group ( P < 0.001 and P = 0.009, respectively). The pulmonary status of 51.8% of construction workers showed moderate restriction, while 4.70% exhibited obstruction. Considering the construction workers' excessive exposure to PNOS and silica, besides depressed lung function parameters, they can be classified as a high-risk group for respiratory diseases.

Design and Implementation of Green Construction Scheme for a High-rise Residential Building Project

NASA Astrophysics Data System (ADS)

Zhou, Yong; Huang, You Zhen

2018-06-01

This paper mainly studies the green construction scheme of a high-rise residential building project. From "four sections one environmental protection", saving material, water saving, energy saving, economical use of land and environmental protection conduct analysis and research. Adopting scientific, advanced, reasonable and economical construction technology measures, implementing green construction method. Promoting energy-saving technologies in buildings, ensuring the sustainable use of resources, Maximum savings of resources and energy, increase energy efficiency, to reduce pollution, reducing the adverse environmental impact of construction activities, ensure construction safety, build sustainable buildings.

Micrometer scale guidance of mesenchymal stem cells to form structurally oriented large-scale tissue engineered cartilage.

PubMed

Chou, Chih-Ling; Rivera, Alexander L; Williams, Valencia; Welter, Jean F; Mansour, Joseph M; Drazba, Judith A; Sakai, Takao; Baskaran, Harihara

2017-09-15

Current clinical methods to treat articular cartilage lesions provide temporary relief of the symptoms but fail to permanently restore the damaged tissue. Tissue engineering, using mesenchymal stem cells (MSCs) combined with scaffolds and bioactive factors, is viewed as a promising method for repairing cartilage injuries. However, current tissue engineered constructs display inferior mechanical properties compared to native articular cartilage, which could be attributed to the lack of structural organization of the extracellular matrix (ECM) of these engineered constructs in comparison to the highly oriented structure of articular cartilage ECM. We previously showed that we can guide MSCs undergoing chondrogenesis to align using microscale guidance channels on the surface of a two-dimensional (2-D) collagen scaffold, which resulted in the deposition of aligned ECM within the channels and enhanced mechanical properties of the constructs. In this study, we developed a technique to roll 2-D collagen scaffolds containing MSCs within guidance channels in order to produce a large-scale, three-dimensional (3-D) tissue engineered cartilage constructs with enhanced mechanical properties compared to current constructs. After rolling the MSC-scaffold constructs into a 3-D cylindrical structure, the constructs were cultured for 21days under chondrogenic culture conditions. The microstructure architecture and mechanical properties of the constructs were evaluated using imaging and compressive testing. Histology and immunohistochemistry of the constructs showed extensive glycosaminoglycan (GAG) and collagen type II deposition. Second harmonic generation imaging and Picrosirius red staining indicated alignment of neo-collagen fibers within the guidance channels of the constructs. Mechanical testing indicated that constructs containing the guidance channels displayed enhanced compressive properties compared to control constructs without these channels. In conclusion, using a novel roll-up method, we have developed large scale MSC based tissue-engineered cartilage that shows microscale structural organization and enhanced compressive properties compared to current tissue engineered constructs. Tissue engineered cartilage constructs made with human mesenchymal stem cells (hMSCs), scaffolds and bioactive factors are a promising solution to treat cartilage defects. A major disadvantage of these constructs is their inferior mechanical properties compared to the native tissue, which is likely due to the lack of structural organization of the extracellular matrix of the engineered constructs. In this study, we developed three-dimensional (3-D) cartilage constructs from rectangular scaffold sheets containing hMSCs in micro-guidance channels and characterized their mechanical properties and metabolic requirements. The work led to a novel roll-up method to embed 2-D microscale structures in 3-D constructs. Further, micro-guidance channels incorporated within the 3-D cartilage constructs led to the production of aligned cell-produced matrix and enhanced mechanical function. Copyright © 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Pre-Service Teachers' Mental Constructions of Concepts in Matrix Algebra

ERIC Educational Resources Information Center

Ndlovu, Zanele; Brijlall, Deonarain

2015-01-01

This study is part of ongoing research in undergraduate mathematics education. The study was guided by the belief that understanding the mental constructions the pre-service teachers make when learning matrix algebra concepts leads to improved instructional methods. In this preliminary study the data was collected from 85 pre-service teachers…

Mechanical testing of internal fixation devices: A theoretical and practical examination of current methods.

PubMed

Grant, Caroline A; Schuetz, Michael; Epari, Devakar

2015-11-26

Successful healing of long bone fractures is dependent on the mechanical environment created within the fracture, which in turn is dependent on the fixation strategy. Recent literature reports have suggested that locked plating devices are too stiff to reliably promote healing. However, in vitro testing of these devices has been inconsistent in both method of constraint and reported outcomes, making comparisons between studies and the assessment of construct stiffness problematic. Each of the methods previously used in the literature were assessed for their effect on the bending of the sample and concordant stiffness. The choice of outcome measures used in in vitro fracture studies was also assessed. Mechanical testing was conducted on seven hole locked plated constructs in each method for comparison. Based on the assessment of each method the use of spherical bearings, ball joints or similar is suggested at both ends of the sample. The use of near and far cortex movement was found to be more comprehensive and more accurate than traditional centrally calculated interfragmentary movement values; stiffness was found to be highly susceptible to the accuracy of deformation measurements and constraint method, and should only be used as a within study comparison method. The reported stiffness values of locked plate constructs from in vitro mechanical testing is highly susceptible to testing constraints and output measures, with many standard techniques overestimating the stiffness of the construct. This raises the need for further investigation into the actual mechanical behaviour within the fracture gap of these devices. Copyright © 2015 Elsevier Ltd. All rights reserved.

Perspectives on Using Video Recordings in Conversation Analytical Studies on Learning in Interaction

ERIC Educational Resources Information Center

Rusk, Fredrik; Pörn, Michaela; Sahlström, Fritjof; Slotte-Lüttge, Anna

2015-01-01

Video is currently used in many studies to document the interaction in conversation analytical (CA) studies on learning. The discussion on the method used in these studies has primarily focused on the analysis or the data construction, whereas the relation between data construction and analysis is rarely brought to attention. The aim of this…

Wavelet bases on the L-shaped domain

NASA Astrophysics Data System (ADS)

Jouini, Abdellatif; Lemarié-Rieusset, Pierre Gilles

2013-07-01

We present in this paper two elementary constructions of multiresolution analyses on the L-shaped domain D. In the first one, we shall describe a direct method to define an orthonormal multiresolution analysis. In the second one, we use the decomposition method for constructing a biorthogonal multiresolution analysis. These analyses are adapted for the study of the Sobolev spaces Hs(D)(s∈N).

Research on Construction Technology of First Pile in an Urban Expressway under Complicated Conditions

NASA Astrophysics Data System (ADS)

Zhu, Zhi gang

2017-12-01

This paper develops a research method on the construction of the first pile in the process of the construction on an urban expressway under complicated conditions, such as the difference between the underground conditions and the exploration results,the sand formation,the whole weathered and the rich groundwater. We study the relevant technical parameters and construction organization through construction of the first pile. The results show that construction on the first pile is very important under complicated conditions and can provide a basis to continuously improve the level of the whole pile foundation construction technology, and ultimately determine the entire project feasible construction program and the successful completion of the construction project.

Self-Discrepancy: Comparisons of the Psychometric Properties of Three Instruments

ERIC Educational Resources Information Center

Watson, Neill; Bryan, Brandon C.; Thrash, Todd M.

2010-01-01

In 2 studies, the psychometric properties of 3 methods for measuring real-ideal and real ought self-discrepancies were compared: the idiographic Self-Concept Questionnaire--Personal Constructs, the nonidiographic Self-Concept Questionnaire--Conventional Constructs, and the content-free Abstract Measures. In the 1st study, 125 students at a…

Is Acculturation a Dynamic Construct?: The Influence of Method of Priming Culture on Acculturation

ERIC Educational Resources Information Center

Lechuga, Julia

2008-01-01

Recent evidence suggests that culture is a dynamic construct activated in response to cues encountered in a given situation. Research on acculturation indicates that this is a complex construct that might be domain specific. Two studies were undertaken to investigate the effect of two ways of priming culture on acculturation and enculturation…

What Do You Think You Are Measuring? A Mixed-Methods Procedure for Assessing the Content Validity of Test Items and Theory-Based Scaling

PubMed Central

Koller, Ingrid; Levenson, Michael R.; Glück, Judith

2017-01-01

The valid measurement of latent constructs is crucial for psychological research. Here, we present a mixed-methods procedure for improving the precision of construct definitions, determining the content validity of items, evaluating the representativeness of items for the target construct, generating test items, and analyzing items on a theoretical basis. To illustrate the mixed-methods content-scaling-structure (CSS) procedure, we analyze the Adult Self-Transcendence Inventory, a self-report measure of wisdom (ASTI, Levenson et al., 2005). A content-validity analysis of the ASTI items was used as the basis of psychometric analyses using multidimensional item response models (N = 1215). We found that the new procedure produced important suggestions concerning five subdimensions of the ASTI that were not identifiable using exploratory methods. The study shows that the application of the suggested procedure leads to a deeper understanding of latent constructs. It also demonstrates the advantages of theory-based item analysis. PMID:28270777

Computational methods and traveling wave solutions for the fourth-order nonlinear Ablowitz-Kaup-Newell-Segur water wave dynamical equation via two methods and its applications

NASA Astrophysics Data System (ADS)

Ali, Asghar; Seadawy, Aly R.; Lu, Dianchen

2018-05-01

The aim of this article is to construct some new traveling wave solutions and investigate localized structures for fourth-order nonlinear Ablowitz-Kaup-Newell-Segur (AKNS) water wave dynamical equation. The simple equation method (SEM) and the modified simple equation method (MSEM) are applied in this paper to construct the analytical traveling wave solutions of AKNS equation. The different waves solutions are derived by assigning special values to the parameters. The obtained results have their importance in the field of physics and other areas of applied sciences. All the solutions are also graphically represented. The constructed results are often helpful for studying several new localized structures and the waves interaction in the high-dimensional models.

Construction workers working in musculoskeletal pain and engaging in leisure-time physical activity: Findings from a mixed-methods pilot study.

PubMed

Caban-Martinez, Alberto J; Lowe, Kincaid A; Herrick, Robert; Kenwood, Christopher; Gagne, Joshua J; Becker, Jamie F; Schneider, Scott P; Dennerlein, Jack T; Sorensen, Glorian

2014-07-01

While exercise has been shown to be beneficial for some musculoskeletal pain conditions, construction workers who are regularly burdened with musculoskeletal pain may engage less in leisure-time physical activity (LTPA) due to pain. In a small pilot study, we investigate how musculoskeletal pain may influence participation in LTPA among construction workers. A sequential explanatory mixed-methods design was employed using a jobsite-based survey (n = 43) among workers at two commercial construction sites and one focus group (n = 5). Over 93% of these construction workers reported engaging in LTPA and 70% reported musculoskeletal pain. Fifty-seven percent of workers who met either moderate or vigorous LTPA guidelines reported lower extremity pain (i.e., ankle, knee) compared with 21% of those who did not engage in either LTPA (P = 0.04). Focus group analyses indicate that workers felt they already get significant physical activity out of their job because they are "moving all the time and not sitting behind a desk." Workers also felt they "have no choice but to work through pain and discomfort [as the worker] needs to do anything to get the job done." Pilot study findings suggest that construction workers not only engage in either moderate or vigorous LTPA despite musculoskeletal pain but workers in pain engage in more LTPA than construction workers without pain. © 2014 Wiley Periodicals, Inc.

[Construction of biopharmaceutics classification system of Chinese materia medica].

PubMed

Liu, Yang; Wei, Li; Dong, Ling; Zhu, Mei-Ling; Tang, Ming-Min; Zhang, Lei

2014-12-01

Based on the characteristics of multicomponent of traditional Chinese medicine and drawing lessons from the concepts, methods and techniques of biopharmaceutics classification system (BCS) in chemical field, this study comes up with the science framework of biopharmaceutics classification system of Chinese materia medica (CMMBCS). Using the different comparison method of multicomponent level and the CMMBCS method of overall traditional Chinese medicine, the study constructs the method process while setting forth academic thoughts and analyzing theory. The basic role of this system is clear to reveal the interaction and the related absorption mechanism of multicomponent in traditional Chinese medicine. It also provides new ideas and methods for improving the quality of Chinese materia medica and the development of new drug research.

Systematic review: chronic obstructive pulmonary disease and construction workers

PubMed Central

Borup, H.; Kirkeskov, L.; Hanskov, D. J. A.

2017-01-01

Abstract Background Between 15 and 20% of prevalent cases of chronic obstructive pulmonary disease (COPD) have been attributed to occupational exposures to vapours, gases, dusts and fumes. Dust at construction sites is still a challenge, but no overview exists of COPD among construction workers. Aims To assess the occurrence of COPD among construction workers. Methods We performed a systematic search in PubMed and Embase between 1 January 1990 and 31 August 2016 in order to identify epidemiological studies with a risk estimate for either COPD morbidity/mortality or a spirometry-based definition of airway obstruction among workers in the construction industry. The authors independently assessed studies to determine their eligibility and performed a quality assessment of the included papers. Results Twelve studies were included. Nine studies found a statistically significant association between COPD and work in the construction industry, although only among never-smokers in one study and only for the period after 2000 in another study. One study found that the annual decline in forced expiratory volume in 1 s was significantly higher among construction workers compared with bus drivers. Conclusions This review suggests that COPD occurs more often among construction workers than among workers who are not exposed to construction dust. It is not possible to draw any conclusions on specific subgroups as most studies analysed construction workers as one united group. In addition, no potential exposure–effect relationship could be identified. PMID:28204712

Single-subject structural networks with closed-form rotation invariant matching mprove power in developmental studies of the cortex.

PubMed

Kandel, Benjamin M; Wang, Danny J J; Gee, James C; Avants, Brian B

2014-01-01

Although much attention has recently been focused on single-subject functional networks, using methods such as resting-state functional MRI, methods for constructing single-subject structural networks are in their infancy. Single-subject cortical networks aim to describe the self-similarity across the cortical structure, possibly signifying convergent developmental pathways. Previous methods for constructing single-subject cortical networks have used patch-based correlations and distance metrics based on curvature and thickness. We present here a method for constructing similarity-based cortical structural networks that utilizes a rotation-invariant representation of structure. The resulting graph metrics are closely linked to age and indicate an increasing degree of closeness throughout development in nearly all brain regions, perhaps corresponding to a more regular structure as the brain matures. The derived graph metrics demonstrate a four-fold increase in power for detecting age as compared to cortical thickness. This proof of concept study indicates that the proposed metric may be useful in identifying biologically relevant cortical patterns.

No-cost manual method for preparation of tissue microarrays having high quality comparable to semiautomated methods.

PubMed

Foda, Abd Al-Rahman Mohammad

2013-05-01

Manual tissue microarray (TMA) construction had been introduced to avoid the high cost of automated and semiautomated techniques. The cheapest and simplest technique for constructing manual TMA was that of using mechanical pencil tips. This study was carried out to modify this method, aiming to raise its quality to reach that of expensive ones. Some modifications were introduced to Shebl's technique. Two conventional mechanical pencil tips of different diameters were used to construct the recipient blocks. A source of mild heat was used, and blocks were incubated at 38°C overnight. With our modifications, 3 high-density TMA blocks were constructed. We successfully performed immunostaining without substantial tissue loss. Our modifications increased the number of cores per block and improved the stability of the cores within the paraffin block. This new, modified technique is a good alternative for expensive machines in many laboratories.

Building America Case Study: Field Testing of Compartmentalization Methods for Multifamily Construction (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2015-01-01

The 2012 IECC has an airtightness requirement of 3 air changes per hour at 50 Pascals test pressure for both single family and multifamily construction in Climate Zones 3-8. Other programs (LEED, ASHRAE 189, ASHRAE 62.2) have similar or tighter compartmentalization requirements, thus driving the need for easier and more effective methods of compartmentalization in multifamily buildings.

Green Building Premium Cost Analysis in Indonesia Using Work Breakdown Structure Method

NASA Astrophysics Data System (ADS)

Basten, V.; Latief, Y.; Berawi, M. A.; Riswanto; Muliarto, H.

2018-03-01

The concept of green building in the construction industry is indispensable for mitigating environmental issues such as waste, pollution, and carbon emissions. There are some countries that have Green Building rating tools. Indonesia particularly is the country which has Greenship rating tools but the number of Green Building is relatively low. Development of building construction is depended on building investors or owner initiation, so this research is conducted to get the building aspects that have significant effect on the attractiveness using The Green Building Concept. The method in this research is work breakdown structure method that detailing the green building activities. The particular activities will be processed to get the cost elements for the green building achievement that it was targeted to improve better than conventional building. The final result of the study was a very significant work package on green building construction in the city of Indonesia case study.

How to Construct a Mixed Methods Research Design.

PubMed

Schoonenboom, Judith; Johnson, R Burke

2017-01-01

This article provides researchers with knowledge of how to design a high quality mixed methods research study. To design a mixed study, researchers must understand and carefully consider each of the dimensions of mixed methods design, and always keep an eye on the issue of validity. We explain the seven major design dimensions: purpose, theoretical drive, timing (simultaneity and dependency), point of integration, typological versus interactive design approaches, planned versus emergent design, and design complexity. There also are multiple secondary dimensions that need to be considered during the design process. We explain ten secondary dimensions of design to be considered for each research study. We also provide two case studies showing how the mixed designs were constructed.

Geophysical methods for road construction and maintenance

NASA Astrophysics Data System (ADS)

Rasul, Hedi; Karlson, Caroline; Jamali, Imran; Earon, Robert; Olofsson, Bo

2015-04-01

Infrastructure, such as road transportation, is a vital in civilized societies; which need to be constructed and maintained regularly. A large part of the project cost is attributed to subsurface conditions, where unsatisfactory conditions could increase either the geotechnical stabilization measures needed or the design cost itself. A way to collect information of the subsurface and existing installations which can lead to measures reducing the project cost and damage is to use geophysical methods during planning, construction and maintenance phases. The moisture in road layers is an important factor, which will affect the bearing capacity of the construction as well as the maintenances. Moisture in the road is a key factor for a well-functioning road. On the other hand the excessive moisture is the main reason of road failure and problems. From a hydrological point of view geophysical methods could help road planners identify the water table, geological strata, pollution arising from the road and the movement of the pollution before, during and after construction. Geophysical methods also allow road planners to collect valuable data for a large area without intrusive investigations such as with boreholes, i.e. minimizing the environmental stresses and costs. However, it is important to specify the investigation site and to choose the most appropriate geophysical method based on the site chosen and the objective of the investigation. Currently, numerous construction and rehabilitation projects are taking places around the world. Many of these projects are focused on infrastructural development, comprising both new projects and expansion of the existing infrastructural network. Geophysical methods can benefit these projects greatly during all phases. During the construction phase Ground Penetrating radar (GPR) is very useful in combination with Electrical Resistivity (ER) for detecting soil water content and base course compaction. However, ER and Electromagnetic (EM) methods can also be used for monitoring changes in water content and pollutant spreading during the maintenance phase. The objective of this study was to describe various geophysical methods which could benefit the road planning, construction and maintenance phases focusing on hydrological impacts.

Analysis of Vibration and Noise of Construction Machinery Based on Ensemble Empirical Mode Decomposition and Spectral Correlation Analysis Method

NASA Astrophysics Data System (ADS)

Chen, Yuebiao; Zhou, Yiqi; Yu, Gang; Lu, Dan

In order to analyze the effect of engine vibration on cab noise of construction machinery in multi-frequency bands, a new method based on ensemble empirical mode decomposition (EEMD) and spectral correlation analysis is proposed. Firstly, the intrinsic mode functions (IMFs) of vibration and noise signals were obtained by EEMD method, and then the IMFs which have the same frequency bands were selected. Secondly, we calculated the spectral correlation coefficients between the selected IMFs, getting the main frequency bands in which engine vibration has significant impact on cab noise. Thirdly, the dominated frequencies were picked out and analyzed by spectral analysis method. The study result shows that the main frequency bands and dominated frequencies in which engine vibration have serious impact on cab noise can be identified effectively by the proposed method, which provides effective guidance to noise reduction of construction machinery.

Alternative methods for ray tracing in uniaxial media. Application to negative refraction

NASA Astrophysics Data System (ADS)

Bellver-Cebreros, Consuelo; Rodriguez-Danta, Marcelo

2007-03-01

In previous papers [C. Bellver-Cebreros, M. Rodriguez-Danta, Eikonal equation, alternative expression of Fresnel's equation and Mohr's construction in optical anisotropic media, Opt. Commun. 189 (2001) 193; C. Bellver-Cebreros, M. Rodriguez-Danta, Internal conical refraction in biaxial media and graphical plane constructions deduced from Mohr's method, Opt. Commun. 212 (2002) 199; C. Bellver-Cebreros, M. Rodriguez-Danta, Refraccion conica externa en medios biaxicos a partir de la construccion de Mohr, Opt. Pura AppliE 36 (2003) 33], the authors have developed a method based on the local properties of dielectric permittivity tensor and on Mohr's plane graphical construction in order to study the behaviour of locally plane light waves in anisotropic media. In this paper, this alternative methodology is compared with the traditional one, by emphasizing the simplicity of the former when studying ray propagation through uniaxial media (comparison is possible since, in this case, traditional construction becomes also plane). An original and simple graphical method is proposed in order to determine the direction of propagation given by the wave vector from the knowledge of the extraordinary ray direction (given by Poynting vector). Some properties of light rays in these media not described in the literature are obtained. Finally, two applications are considered: a description of optical birefringence under normal incidence and the study of negative refraction in uniaxial media.

Signal Construction-Based Dispersion Compensation of Lamb Waves Considering Signal Waveform and Amplitude Spectrum Preservation

PubMed Central

Cai, Jian; Yuan, Shenfang; Wang, Tongguang

2016-01-01

The results of Lamb wave identification for the aerospace structures could be easily affected by the nonlinear-dispersion characteristics. In this paper, dispersion compensation of Lamb waves is of particular concern. Compared with the similar research works on the traditional signal domain transform methods, this study is based on signal construction from the viewpoint of nonlinear wavenumber linearization. Two compensation methods of linearly-dispersive signal construction (LDSC) and non-dispersive signal construction (NDSC) are proposed. Furthermore, to improve the compensation effect, the influence of the signal construction process on the other crucial signal properties, including the signal waveform and amplitude spectrum, is considered during the investigation. The linear-dispersion and non-dispersion effects are firstly analyzed. Then, after the basic signal construction principle is explored, the numerical realization of LDSC and NDSC is discussed, in which the signal waveform and amplitude spectrum preservation is especially regarded. Subsequently, associated with the delay-and-sum algorithm, LDSC or NDSC is employed for high spatial resolution damage imaging, so that the adjacent multi-damage or quantitative imaging capacity of Lamb waves can be strengthened. To verify the proposed signal construction and damage imaging methods, the experimental and numerical validation is finally arranged on the aluminum plates. PMID:28772366

Signal Construction-Based Dispersion Compensation of Lamb Waves Considering Signal Waveform and Amplitude Spectrum Preservation.

PubMed

Cai, Jian; Yuan, Shenfang; Wang, Tongguang

2016-12-23

The results of Lamb wave identification for the aerospace structures could be easily affected by the nonlinear-dispersion characteristics. In this paper, dispersion compensation of Lamb waves is of particular concern. Compared with the similar research works on the traditional signal domain transform methods, this study is based on signal construction from the viewpoint of nonlinear wavenumber linearization. Two compensation methods of linearly-dispersive signal construction (LDSC) and non-dispersive signal construction (NDSC) are proposed. Furthermore, to improve the compensation effect, the influence of the signal construction process on the other crucial signal properties, including the signal waveform and amplitude spectrum, is considered during the investigation. The linear-dispersion and non-dispersion effects are firstly analyzed. Then, after the basic signal construction principle is explored, the numerical realization of LDSC and NDSC is discussed, in which the signal waveform and amplitude spectrum preservation is especially regarded. Subsequently, associated with the delay-and-sum algorithm, LDSC or NDSC is employed for high spatial resolution damage imaging, so that the adjacent multi-damage or quantitative imaging capacity of Lamb waves can be strengthened. To verify the proposed signal construction and damage imaging methods, the experimental and numerical validation is finally arranged on the aluminum plates.

Construction of digital core by adaptive porosity method

NASA Astrophysics Data System (ADS)

Xia, Huifen; Liu, Ting; Zhao, Ling; Sun, Yanyu; Pan, Junliang

2017-05-01

The construction of digital core has its unique advantages in the study of water flooding or polymer flooding oil displacement efficiency. The frequency distribution of pore size is measured by mercury injection experiment, the coordination number by CT scanning method, and the wettability data by imbibition displacement was measured, on the basis of considering the ratio of pore throat ratio and wettability, the principle of adaptive porosity is used to construct the digital core. The results show that the water flooding recovery, the degree of polymer flooding and the results of the Physical simulation experiment are in good agreement.

Greenhouse Gas Emissions from Asphalt Pavement Construction: A Case Study in China

PubMed Central

Ma, Feng; Sha, Aimin; Lin, Ruiyu; Huang, Yue; Wang, Chao

2016-01-01

In China, the construction of asphalt pavement has a significant impact on the environment, and energy use and greenhouse gas (GHG) emissions from asphalt pavement construction have been receiving increasing attention in recent years. At present, there is no universal criterion for the evaluation of GHG emissions in asphalt pavement construction. This paper proposes to define the system boundaries for GHG emissions from asphalt pavement by using a process-based life cycle assessment method. A method for evaluating GHG emissions from asphalt pavement construction is suggested. The paper reports a case study of GHG emissions from a typical asphalt pavement construction project in China. The results show that the greenhouse gas emissions from the mixture mixing phase are the highest, and account for about 54% of the total amount. The second highest GHG emission phase is the production of raw materials. For GHG emissions of cement stabilized base/subbase, the production of raw materials emits the most, about 98%. The GHG emission for cement production alone is about 92%. The results indicate that any measures to reduce GHG emissions from asphalt pavement construction should be focused on the raw materials manufacturing stage. If the raw materials production phase is excluded, the measures to reduce GHG emissions should be aimed at the mixture mixing phase. PMID:27011196

Greenhouse Gas Emissions from Asphalt Pavement Construction: A Case Study in China.

PubMed

Ma, Feng; Sha, Aimin; Lin, Ruiyu; Huang, Yue; Wang, Chao

2016-03-22

In China, the construction of asphalt pavement has a significant impact on the environment, and energy use and greenhouse gas (GHG) emissions from asphalt pavement construction have been receiving increasing attention in recent years. At present, there is no universal criterion for the evaluation of GHG emissions in asphalt pavement construction. This paper proposes to define the system boundaries for GHG emissions from asphalt pavement by using a process-based life cycle assessment method. A method for evaluating GHG emissions from asphalt pavement construction is suggested. The paper reports a case study of GHG emissions from a typical asphalt pavement construction project in China. The results show that the greenhouse gas emissions from the mixture mixing phase are the highest, and account for about 54% of the total amount. The second highest GHG emission phase is the production of raw materials. For GHG emissions of cement stabilized base/subbase, the production of raw materials emits the most, about 98%. The GHG emission for cement production alone is about 92%. The results indicate that any measures to reduce GHG emissions from asphalt pavement construction should be focused on the raw materials manufacturing stage. If the raw materials production phase is excluded, the measures to reduce GHG emissions should be aimed at the mixture mixing phase.

Automatic construction of subject-specific human airway geometry including trifurcations based on a CT-segmented airway skeleton and surface

PubMed Central

Miyawaki, Shinjiro; Tawhai, Merryn H.; Hoffman, Eric A.; Wenzel, Sally E.; Lin, Ching-Long

2016-01-01

We propose a method to construct three-dimensional airway geometric models based on airway skeletons, or centerlines (CLs). Given a CT-segmented airway skeleton and surface, the proposed CL-based method automatically constructs subject-specific models that contain anatomical information regarding branches, include bifurcations and trifurcations, and extend from the trachea to terminal bronchioles. The resulting model can be anatomically realistic with the assistance of an image-based surface; alternatively a model with an idealized skeleton and/or branch diameters is also possible. This method systematically identifies and classifies trifurcations to successfully construct the models, which also provides the number and type of trifurcations for the analysis of the airways from an anatomical point of view. We applied this method to 16 normal and 16 severe asthmatic subjects using their computed tomography images. The average distance between the surface of the model and the image-based surface was 11% of the average voxel size of the image. The four most frequent locations of trifurcations were the left upper division bronchus, left lower lobar bronchus, right upper lobar bronchus, and right intermediate bronchus. The proposed method automatically constructed accurate subject-specific three-dimensional airway geometric models that contain anatomical information regarding branches using airway skeleton, diameters, and image-based surface geometry. The proposed method can construct (i) geometry automatically for population-based studies, (ii) trifurcations to retain the original airway topology, (iii) geometry that can be used for automatic generation of computational fluid dynamics meshes, and (iv) geometry based only on a skeleton and diameters for idealized branches. PMID:27704229

Cooperative Learning for Fostering Knowledge Construction in Japanese High School

ERIC Educational Resources Information Center

Mizuno, Masao

2011-01-01

The purpose of this study is to investigate how cooperative learning approach supports teachers to design an effective teaching for promoting the students learning to construct knowledge in practice. Quantitative and qualitative research methods such as surveys and case studies were employed for data collection. A High School which challenges face…

A Partial Theory of Executive Succession.

ERIC Educational Resources Information Center

Thiemann, Francis C.

This study has two purposes: (1) To construct a partial theory of succession, and (2) to utilize a method of theory construction which combines some of the concepts of Hans Zetterberg with the principles of formal symbolic logic. A bibliography on succession in complex organizations with entries on descriptive and empirical studies from various…

A Construct Validity Study of Clinical Competence: A Multitrait Multimethod Matrix Approach

ERIC Educational Resources Information Center

Baig, Lubna; Violato, Claudio; Crutcher, Rodney

2010-01-01

Introduction: The purpose of the study was to adduce evidence for estimating the construct validity of clinical competence measured through assessment instruments used for high-stakes examinations. Methods: Thirty-nine international physicians (mean age = 41 + 6.5 y) participated in high-stakes examination and 3-month supervised clinical practice…

Adaptation and niche construction in human prehistory: a case study from the southern Scandinavian Late Glacial

PubMed Central

Riede, Felix

2011-01-01

The niche construction model postulates that human bio-social evolution is composed of three inheritance domains, genetic, cultural and ecological, linked by feedback selection. This paper argues that many kinds of archaeological data can serve as proxies for human niche construction processes, and presents a method for investigating specific niche construction hypotheses. To illustrate this method, the repeated emergence of specialized reindeer (Rangifer tarandus) hunting/herding economies during the Late Palaeolithic (ca 14.7–11.5 kyr BP) in southern Scandinavia is analysed from a niche construction/triple-inheritance perspective. This economic relationship resulted in the eventual domestication of Rangifer. The hypothesis of whether domestication was achieved as early as the Late Palaeolithic, and whether this required the use of domesticated dogs (Canis familiaris) as hunting, herding or transport aids, is tested via a comparative analysis using material culture-based phylogenies and ecological datasets in relation to demographic/genetic proxies. Only weak evidence for sustained niche construction behaviours by prehistoric hunter–gatherer in southern Scandinavia is found, but this study nonetheless provides interesting insights into the likely processes of dog and reindeer domestication, and into processes of adaptation in Late Glacial foragers. PMID:21320895

Adaptation and niche construction in human prehistory: a case study from the southern Scandinavian Late Glacial.

PubMed

Riede, Felix

2011-03-27

The niche construction model postulates that human bio-social evolution is composed of three inheritance domains, genetic, cultural and ecological, linked by feedback selection. This paper argues that many kinds of archaeological data can serve as proxies for human niche construction processes, and presents a method for investigating specific niche construction hypotheses. To illustrate this method, the repeated emergence of specialized reindeer (Rangifer tarandus) hunting/herding economies during the Late Palaeolithic (ca 14.7-11.5 kyr BP) in southern Scandinavia is analysed from a niche construction/triple-inheritance perspective. This economic relationship resulted in the eventual domestication of Rangifer. The hypothesis of whether domestication was achieved as early as the Late Palaeolithic, and whether this required the use of domesticated dogs (Canis familiaris) as hunting, herding or transport aids, is tested via a comparative analysis using material culture-based phylogenies and ecological datasets in relation to demographic/genetic proxies. Only weak evidence for sustained niche construction behaviours by prehistoric hunter-gatherer in southern Scandinavia is found, but this study nonetheless provides interesting insights into the likely processes of dog and reindeer domestication, and into processes of adaptation in Late Glacial foragers.

A novel method for identifying disease associated protein complexes based on functional similarity protein complex networks.

PubMed

Le, Duc-Hau

2015-01-01

Protein complexes formed by non-covalent interaction among proteins play important roles in cellular functions. Computational and purification methods have been used to identify many protein complexes and their cellular functions. However, their roles in terms of causing disease have not been well discovered yet. There exist only a few studies for the identification of disease-associated protein complexes. However, they mostly utilize complicated heterogeneous networks which are constructed based on an out-of-date database of phenotype similarity network collected from literature. In addition, they only apply for diseases for which tissue-specific data exist. In this study, we propose a method to identify novel disease-protein complex associations. First, we introduce a framework to construct functional similarity protein complex networks where two protein complexes are functionally connected by either shared protein elements, shared annotating GO terms or based on protein interactions between elements in each protein complex. Second, we propose a simple but effective neighborhood-based algorithm, which yields a local similarity measure, to rank disease candidate protein complexes. Comparing the predictive performance of our proposed algorithm with that of two state-of-the-art network propagation algorithms including one we used in our previous study, we found that it performed statistically significantly better than that of these two algorithms for all the constructed functional similarity protein complex networks. In addition, it ran about 32 times faster than these two algorithms. Moreover, our proposed method always achieved high performance in terms of AUC values irrespective of the ways to construct the functional similarity protein complex networks and the used algorithms. The performance of our method was also higher than that reported in some existing methods which were based on complicated heterogeneous networks. Finally, we also tested our method with prostate cancer and selected the top 100 highly ranked candidate protein complexes. Interestingly, 69 of them were evidenced since at least one of their protein elements are known to be associated with prostate cancer. Our proposed method, including the framework to construct functional similarity protein complex networks and the neighborhood-based algorithm on these networks, could be used for identification of novel disease-protein complex associations.

Comparison of Response Surface Construction Methods for Derivative Estimation Using Moving Least Squares, Kriging and Radial Basis Functions

NASA Technical Reports Server (NTRS)

Krishnamurthy, Thiagarajan

2005-01-01

Response construction methods using Moving Least Squares (MLS), Kriging and Radial Basis Functions (RBF) are compared with the Global Least Squares (GLS) method in three numerical examples for derivative generation capability. Also, a new Interpolating Moving Least Squares (IMLS) method adopted from the meshless method is presented. It is found that the response surface construction methods using the Kriging and RBF interpolation yields more accurate results compared with MLS and GLS methods. Several computational aspects of the response surface construction methods also discussed.

A new sampling scheme for developing metamodels with the zeros of Chebyshev polynomials

NASA Astrophysics Data System (ADS)

Wu, Jinglai; Luo, Zhen; Zhang, Nong; Zhang, Yunqing

2015-09-01

The accuracy of metamodelling is determined by both the sampling and approximation. This article proposes a new sampling method based on the zeros of Chebyshev polynomials to capture the sampling information effectively. First, the zeros of one-dimensional Chebyshev polynomials are applied to construct Chebyshev tensor product (CTP) sampling, and the CTP is then used to construct high-order multi-dimensional metamodels using the 'hypercube' polynomials. Secondly, the CTP sampling is further enhanced to develop Chebyshev collocation method (CCM) sampling, to construct the 'simplex' polynomials. The samples of CCM are randomly and directly chosen from the CTP samples. Two widely studied sampling methods, namely the Smolyak sparse grid and Hammersley, are used to demonstrate the effectiveness of the proposed sampling method. Several numerical examples are utilized to validate the approximation accuracy of the proposed metamodel under different dimensions.

Patterns of Knowledge Construction

ERIC Educational Resources Information Center

Chang, Bo

2018-01-01

The purpose of this study was to identify knowledge construction patterns in a local learning community. Observation, documents, and semistructured interviews were employed to collect data. Twenty learners were interviewed. Data were analyzed inductively using the constant comparative method. Five major patterns--radiation, circulation,…

Preliminary study on enhancing waste management best practice model in Malaysia construction industry

NASA Astrophysics Data System (ADS)

Jamaludin, Amril Hadri; Karim, Nurulzatushima Abdul; Noor, Raja Nor Husna Raja Mohd; Othman, Nurulhidayah; Malik, Sulaiman Abdul

2017-08-01

Construction waste management (CWM) is the practice of minimizing and diverting construction waste, demolition debris, and land-clearing debris from disposal and redirecting recyclable resources back into the construction process. Best practice model means best choice from the collection of other practices that was built for purpose of construction waste management. The practice model can help the contractors in minimizing waste before the construction activities will be started. The importance of minimizing wastage will have direct impact on time, cost and quality of a construction project. This paper is focusing on the preliminary study to determine the factors of waste generation in the construction sites and identify the effectiveness of existing construction waste management practice conducted in Malaysia. The paper will also include the preliminary works of planned research location, data collection method, and analysis to be done by using the Analytical Hierarchy Process (AHP) to help in developing suitable waste management best practice model that can be used in the country.

Space construction data base

NASA Technical Reports Server (NTRS)

1979-01-01

Construction of large systems in space is a technology requiring the development of construction methods to deploy, assemble, and fabricate the elements comprising such systems. A construction method is comprised of all essential functions and operations and related support equipment necessary to accomplish a specific construction task in a particular way. The data base objective is to provide to the designers of large space systems a compendium of the various space construction methods which could have application to their projects.

Understanding the relationship between safety culture dimensions and safety performance of construction projects through partial least square method

NASA Astrophysics Data System (ADS)

Latief, Yusuf; Machfudiyanto, Rossy A.; Arifuddin, Rosmariani; Yogiswara, Yoko

2017-03-01

Based on the data, 32% of accidental cases in Indonesia occurs on constructional sectors. It is supported by the data from Public Work and Housing Department that 27.43% of the implementation level of Safety Management System policy at construction companies in Indonesia remains unsafe categories. Moreover, there are dimensions of occupational safety culture formed including leadership, behavior, strategy, policy, process, people, safety cost, value and contract system. The aim of this study is to determine the model of an effective safety culture and know the relationship between dimensions in construction industry. The method used in this research was questionnaire survey which was distributed to the sample of construction companies either in a national private one in Indonesia. The result of this research is supposed to be able to illustrate the development of the relationship among occupational safety culture dimensions which have influences to the performances of constructional companies in Indonesia.

Enhancing the competitiveness of skilled construction workers through collaborative education and training

NASA Astrophysics Data System (ADS)

Dardiri, Ahmad; Sutrisno, Kuncoro, Tri; Ichwanto, Muhamad Aris; Suparji

2017-09-01

Professionalism of construction workers is one of the keys to the success of infrastructure development projects. The professionalism of the workforce is demonstrated through the possession of expertise competence certificate (SKA) and/or certificates of skills (SKT) issued formally through competency tests by the National Construction Cervices Development Agency (LPJKN). The magnitude of the national skilled manpower needs has not been able to meet the availability of professional workforce. Strategies to develop the quality of resources require sufficient information on the characteristics of the resources themselves, facilities, constraints, stakeholder support, regulations, and socioeconomic as well as cultural conditions. The problems faced by Indonesia in improving the competitiveness of skilled construction workers are (1) how the level of professionalism of skill workers in construction field, (2) what the constrains on improving the quality of skilled construction workers,and(3) how the appropriate model of education and training skillfull construction work. The study was designed with quantitative and qualitative approaches. Quantitative methods were used to describe the profile of sklill constructions worker. Qualitative methods were used toidentify constraintsin improving the qualityof skilled labor, as well as formulate a viable collaborative education and training model for improving the quality of skill labor. Data were collected by documentation, observation, and interview. The result of the study indicate theat (1) the professionalism knowledge of skilled constructions worker are in still low condition, (2) the constrain faced in developing the quality of skilled construction labor cover economic and structural constrains, and (3) collaborative eduction and training model can improve the quality ods skilld labor contructions.

The concept of value stream mapping to reduce of work-time waste as applied the smart construction management

NASA Astrophysics Data System (ADS)

Elizar, Suripin, Wibowo, Mochamad Agung

2017-11-01

Delays in construction sites occur due to systematic additions of time waste in various activities that are part of the construction process. Work-time waste is non-adding value activity which used to differentiate between physical construction waste found on site and other waste which occurs during the construction process. The aim of this study is identification using the concept of Value Stream Mapping (VSM) to reduce of work-time waste as applied the smart construction management.VSM analysis is a method of business process improvement. The application of VSM began in the manufacturing community. The research method base on theoretically informed case study and literature review. The data have collected using questionnaire through personal interviews from 383 respondents on construction project in Indonesia. The results show that concept of VSM can identify causes of work-time waste. Base on result of questioners and quantitative approach analysis was obtained 29 variables that influence of work-time waste or non-value-adding activities. Base on three cases of construction project founded that average 14.88% of working time was classified as waste. Finally, the concept of VSM can recommend to identification of systematic for reveal current practices and opportunities for improvement towards global challenges. The concept of value stream mapping can help optimize to reduce work-time waste and improve quality standard of construction management. The concept is also can help manager to make a decision to reduce work-time waste so as to obtain of result in more efficient for performance and sustainable construction project.

Automatic Extraction of Urban Built-Up Area Based on Object-Oriented Method and Remote Sensing Data

NASA Astrophysics Data System (ADS)

Li, L.; Zhou, H.; Wen, Q.; Chen, T.; Guan, F.; Ren, B.; Yu, H.; Wang, Z.

2018-04-01

Built-up area marks the use of city construction land in the different periods of the development, the accurate extraction is the key to the studies of the changes of urban expansion. This paper studies the technology of automatic extraction of urban built-up area based on object-oriented method and remote sensing data, and realizes the automatic extraction of the main built-up area of the city, which saves the manpower cost greatly. First, the extraction of construction land based on object-oriented method, the main technical steps include: (1) Multi-resolution segmentation; (2) Feature Construction and Selection; (3) Information Extraction of Construction Land Based on Rule Set, The characteristic parameters used in the rule set mainly include the mean of the red band (Mean R), Normalized Difference Vegetation Index (NDVI), Ratio of residential index (RRI), Blue band mean (Mean B), Through the combination of the above characteristic parameters, the construction site information can be extracted. Based on the degree of adaptability, distance and area of the object domain, the urban built-up area can be quickly and accurately defined from the construction land information without depending on other data and expert knowledge to achieve the automatic extraction of the urban built-up area. In this paper, Beijing city as an experimental area for the technical methods of the experiment, the results show that: the city built-up area to achieve automatic extraction, boundary accuracy of 2359.65 m to meet the requirements. The automatic extraction of urban built-up area has strong practicality and can be applied to the monitoring of the change of the main built-up area of city.

Application of hands-on simulation games to improve classroom experience

NASA Astrophysics Data System (ADS)

Hamzeh, Farook; Theokaris, Christina; Rouhana, Carel; Abbas, Yara

2017-09-01

While many construction companies claim substantial productivity and profit gains when applying lean construction principles, it remains a challenge to teach these principles in a classroom. Lean construction emphasises collaborative processes and integrated delivery practices. Consequently, new teaching methods that nurture such values should form the basis of lean construction education. One of the proposed methods is 'hands-on team simulation games' which can be employed to replicate various real-life processes, projects, or systems for the purpose of teaching, analysing, and understanding. This study aims at assessing this simulation games and understanding their impact on students' learning and satisfaction. Surveys and tests are administered to assess changes in student's perception of their learning styles and their understanding of key lean construction concepts. Results show a positive student reaction to hands-on simulation games, provide pedagogical insights, and highlight suggestions for improvement.

A Sequential Optimization Sampling Method for Metamodels with Radial Basis Functions

PubMed Central

Pan, Guang; Ye, Pengcheng; Yang, Zhidong

2014-01-01

Metamodels have been widely used in engineering design to facilitate analysis and optimization of complex systems that involve computationally expensive simulation programs. The accuracy of metamodels is strongly affected by the sampling methods. In this paper, a new sequential optimization sampling method is proposed. Based on the new sampling method, metamodels can be constructed repeatedly through the addition of sampling points, namely, extrema points of metamodels and minimum points of density function. Afterwards, the more accurate metamodels would be constructed by the procedure above. The validity and effectiveness of proposed sampling method are examined by studying typical numerical examples. PMID:25133206

A Place-Oriented, Mixed-Level Regionalization Method for Constructing Geographic Areas in Health Data Dissemination and Analysis

PubMed Central

Mu, Lan; Wang, Fahui; Chen, Vivien W.; Wu, Xiao-Cheng

2015-01-01

Similar geographic areas often have great variations in population size. In health data management and analysis, it is desirable to obtain regions of comparable population by decomposing areas of large population (to gain more spatial variability) and merging areas of small population (to mask privacy of data). Based on the Peano curve algorithm and modified scale-space clustering, this research proposes a mixed-level regionalization (MLR) method to construct geographic areas with comparable population. The method accounts for spatial connectivity and compactness, attributive homogeneity, and exogenous criteria such as minimum (and approximately equal) population or disease counts. A case study using Louisiana cancer data illustrates the MLR method and its strengths and limitations. A major benefit of the method is that most upper level geographic boundaries can be preserved to increase familiarity of constructed areas. Therefore, the MLR method is more human-oriented and place-based than computer-oriented and space-based. PMID:26251551

13 CFR 305.6 - Allowable methods of procurement for construction services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... design/build, construction management at risk and force account. If an alternate method is used, the... for construction services. 305.6 Section 305.6 Business Credit and Assistance ECONOMIC DEVELOPMENT... Approved Projects § 305.6 Allowable methods of procurement for construction services. (a) Recipients may...

13 CFR 305.6 - Allowable methods of procurement for construction services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... design/build, construction management at risk and force account. If an alternate method is used, the... for construction services. 305.6 Section 305.6 Business Credit and Assistance ECONOMIC DEVELOPMENT... Approved Projects § 305.6 Allowable methods of procurement for construction services. (a) Recipients may...

13 CFR 305.6 - Allowable methods of procurement for construction services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... design/build, construction management at risk and force account. If an alternate method is used, the... for construction services. 305.6 Section 305.6 Business Credit and Assistance ECONOMIC DEVELOPMENT... Approved Projects § 305.6 Allowable methods of procurement for construction services. (a) Recipients may...

Model Configuration and Innovative Design of College Students’ Ecological Civilization Construction

NASA Astrophysics Data System (ADS)

Chengwen, Yang

2018-02-01

This study is based on Marxist eco-civilization thought, combining with Eco management theory, puts forward solutions for college students’ ecological civilization construction. The paper based on the perspective of ecological management theory to analyze the main elements of eco-civilization construction of college students, mainly including five categories. In view of above-mentioned analyze, constructed the model of college students’ eco-civilization which is based on the theory of eco-management, and put forward on concrete methods to improve it.

A STUDY ON THE APPLICATION OF VALUE ENGINEERING TO THE CONSTRUCTION INDUSTRY

NASA Astrophysics Data System (ADS)

Kemmochi, Sampei; Koizumi, Atsushi

Value Engineering (VE), one of the effective management techniques to provide products and services, is focused as a measure to reduce the cost on public works, but its effectiveness as a management technique doesn't seem to be fully understood in the construction industry. This paper demonstrates aspects and issues of VE in construction industry by comparing with manufacturing industry, and to combat these, VE which is implemented in construction industry must be succinct and proposes methods to conduct it from the viewpoint of construction industry. At last, the place to go to for construction industry down the road regarding the VE adaptation is clarified.

Non-destructive testing method for determining the solvent diffusion coefficient in the porous materials products

NASA Astrophysics Data System (ADS)

Belyaev, V. P.; Mishchenko, S. V.; Belyaev, P. S.

2018-01-01

Ensuring non-destructive testing of products in industry is an urgent task. Most of the modern methods for determining the diffusion coefficient in porous materials have been developed for bodies of a given configuration and size. This leads to the need for finished products destruction to make experimental samples from them. The purpose of this study is the development of a dynamic method that allows operatively determine the diffusion coefficient in finished products from porous materials without destroying them. The method is designed to investigate the solvents diffusion coefficient in building constructions from materials having a porous structure: brick, concrete and aerated concrete, gypsum, cement, gypsum or silicate solutions, gas silicate blocks, heat insulators, etc. A mathematical model of the method is constructed. The influence of the design and measuring device operating parameters on the method accuracy is studied. The application results of the developed method for structural porous products are presented.

Simple analysis of the effect of construction materials on bridge impact factors

DOT National Transportation Integrated Search

1999-06-01

The purpose of this research is to study the influence of different construction materials on the dynamic impact factor of bridges. Initially, introduction of the dynamic impact factor and some evaluation methods are presented. A comparison of the re...

Construction of High School Students' Abstraction Levels in Understanding the Concept of Quadrilaterals

ERIC Educational Resources Information Center

Budiarto, Mega Teguh; Khabibah, Siti; Setianingsih, Rini

2017-01-01

The purpose of this study was to examine the abstraction thinking or the vertical reorganization activity of mathematical concepts of high school students while taking account of the abstraction that was constructed earlier, and the socio-cultural background. This study was qualitative in nature with task-based interviews as the method of…

Measuring the Quality of Life of University Students. Research Monograph Series. Volume 1.

ERIC Educational Resources Information Center

Roberts, Lance W.; Clifton, Rodney A.

This study sought to develop a valid set of scales in the cognitive and affective domains for measuring the quality of life of university students. In addition the study attempted to illustrate the usefulness of Thomas Piazza's procedures for constructing valid scales in educational research. Piazza's method involves a multi-step construction of…

Heat stress intervention research in construction: gaps and recommendations.

PubMed

Yang, Yang; Chan, Albert Ping-Chuen

2017-06-08

Developing heat stress interventions for construction workers has received mounting concerns in recent years. However, limited efforts have been exerted to elaborate the rationale, methodology, and practicality of heat stress intervention in the construction industry. This study aims to review previous heat stress intervention research in construction, to identify the major research gaps in methodological issues, and to offer detailed recommendations for future studies. A total of 35 peer-reviewed journal papers have been identified to develop administrative, environmental or personal engineering interventions to safeguard construction workers. It was found that methodological limitations, such as arbitrary sampling methods and unreliable instruments, could be the major obstacle in undertaking heat stress intervention research. To bridge the identified research gaps, this study then refined a research framework for conducting heat stress intervention studies in the construction industry. The proposed research strategy provides researchers and practitioners with fresh insights into expanding multidisciplinary research areas and solving practical problems in the management of heat stress. The proposed research framework may foster the development of heat stress intervention research in construction, which further aids researchers, practitioners, and policymakers in formulating proper intervention strategies.

Applying data mining techniques to explore factors contributing to occupational injuries in Taiwan's construction industry.

PubMed

Cheng, Ching-Wu; Leu, Sou-Sen; Cheng, Ying-Mei; Wu, Tsung-Chih; Lin, Chen-Chung

2012-09-01

Construction accident research involves the systematic sorting, classification, and encoding of comprehensive databases of injuries and fatalities. The present study explores the causes and distribution of occupational accidents in the Taiwan construction industry by analyzing such a database using the data mining method known as classification and regression tree (CART). Utilizing a database of 1542 accident cases during the period 2000-2009, the study seeks to establish potential cause-and-effect relationships regarding serious occupational accidents in the industry. The results of this study show that the occurrence rules for falls and collapses in both public and private project construction industries serve as key factors to predict the occurrence of occupational injuries. The results of the study provide a framework for improving the safety practices and training programs that are essential to protecting construction workers from occasional or unexpected accidents. Copyright © 2011 Elsevier Ltd. All rights reserved.

Literature review of levels and determinants of exposure to potential carcinogens and other agents in the road construction industry.

PubMed

Burstyn, I; Kromhout, H; Boffetta, P

2000-01-01

Workers in the road construction industry include asphalt plant, ground construction, and road paving workers. These individuals can be exposed to a wide range of potentially hazardous substances. A summary of levels of exposure to different substances measured during road construction is presented. In modern road paving, workers typically are exposed to 0.1 to 2 mg/m3 of bitumen fume, which includes 10 to 200 ng/m3 of benzo(a)pyrene. Sampling strategies and analytical methods employed in each reviewed survey are described briefly. The published reports provide some insight into the identity of factors that influence exposure to bitumen among road construction workers: type of work performed, meteorological conditions, temperature of paved asphalt. However, there is a lack of (a) comprehensive and well-designed studies that evaluate determinants of exposure to bitumen in road construction, and (b) standard methods for bitumen sampling and analysis. Information on determinants of other exposures in road construction is either absent or limited. It is concluded that data available through published reports have limited value in assessing historical exposure levels in the road construction industry.

Fractional Relativistic Yamaleev Oscillator Model and Its Dynamical Behaviors

NASA Astrophysics Data System (ADS)

Luo, Shao-Kai; He, Jin-Man; Xu, Yan-Li; Zhang, Xiao-Tian

2016-07-01

In the paper we construct a new kind of fractional dynamical model, i.e. the fractional relativistic Yamaleev oscillator model, and explore its dynamical behaviors. We will find that the fractional relativistic Yamaleev oscillator model possesses Lie algebraic structure and satisfies generalized Poisson conservation law. We will also give the Poisson conserved quantities of the model. Further, the relation between conserved quantities and integral invariants of the model is studied and it is proved that, by using the Poisson conserved quantities, we can construct integral invariants of the model. Finally, the stability of the manifold of equilibrium states of the fractional relativistic Yamaleev oscillator model is studied. The paper provides a general method, i.e. fractional generalized Hamiltonian method, for constructing a family of fractional dynamical models of an actual dynamical system.

Undergraduate Students’ Difficulties in Reading and Constructing Phylogenetic Tree

NASA Astrophysics Data System (ADS)

Sa'adah, S.; Tapilouw, F. S.; Hidayat, T.

2017-02-01

Representation is a very important communication tool to communicate scientific concepts. Biologists produce phylogenetic representation to express their understanding of evolutionary relationships. The phylogenetic tree is visual representation depict a hypothesis about the evolutionary relationship and widely used in the biological sciences. Phylogenetic tree currently growing for many disciplines in biology. Consequently, learning about phylogenetic tree become an important part of biological education and an interesting area for biology education research. However, research showed many students often struggle with interpreting the information that phylogenetic trees depict. The purpose of this study was to investigate undergraduate students’ difficulties in reading and constructing a phylogenetic tree. The method of this study is a descriptive method. In this study, we used questionnaires, interviews, multiple choice and open-ended questions, reflective journals and observations. The findings showed students experiencing difficulties, especially in constructing a phylogenetic tree. The students’ responds indicated that main reasons for difficulties in constructing a phylogenetic tree are difficult to placing taxa in a phylogenetic tree based on the data provided so that the phylogenetic tree constructed does not describe the actual evolutionary relationship (incorrect relatedness). Students also have difficulties in determining the sister group, character synapomorphy, autapomorphy from data provided (character table) and comparing among phylogenetic tree. According to them building the phylogenetic tree is more difficult than reading the phylogenetic tree. Finding this studies provide information to undergraduate instructor and students to overcome learning difficulties of reading and constructing phylogenetic tree.

Construct Validity and Scoring Methods of the World Health Organization: Health and Work Performance Questionnaire Among Workers With Arthritis and Rheumatological Conditions.

PubMed

AlHeresh, Rawan; LaValley, Michael P; Coster, Wendy; Keysor, Julie J

2017-06-01

To evaluate construct validity and scoring methods of the world health organization-health and work performance questionnaire (HPQ) for people with arthritis. Construct validity was examined through hypothesis testing using the recommended guidelines of the consensus-based standards for the selection of health measurement instruments (COSMIN). The HPQ using the absolute scoring method showed moderate construct validity as four of the seven hypotheses were met. The HPQ using the relative scoring method had weak construct validity as only one of the seven hypotheses were met. The absolute scoring method for the HPQ is superior in construct validity to the relative scoring method in assessing work performance among people with arthritis and related rheumatic conditions; however, more research is needed to further explore other psychometric properties of the HPQ.

UOE Pipe Manufacturing Process Simulation: Equipment Designing and Construction

NASA Astrophysics Data System (ADS)

Delistoian, Dmitri; Chirchor, Mihael

2017-12-01

UOE pipe manufacturing process influence directly on pipeline resilience and operation capacity. At present most spreaded pipe manufacturing method is UOE. This method is based on cold forming. After each technological step appears a certain stress and strain level. For pipe stress strain study is designed and constructed special equipment that simulate entire technological process.UOE pipe equipment is dedicated for manufacturing of longitudinally submerged arc welded DN 400 (16 inch) steel pipe.

An Empirical Comparison of Methods for Equating with Randomly Equivalent Groups of 50 to 400 Test Takers. Research Report. ETS RR-10-05

ERIC Educational Resources Information Center

Livingston, Samuel A.; Kim, Sooyeon

2010-01-01

A series of resampling studies investigated the accuracy of equating by four different methods in a random groups equating design with samples of 400, 200, 100, and 50 test takers taking each form. Six pairs of forms were constructed. Each pair was constructed by assigning items from an existing test taken by 9,000 or more test takers. The…

A case‐control study of airways obstruction among construction workers

PubMed Central

Welch, Laura; Ringen, Knut; Quinn, Patricia; Chen, Anna; Haas, Scott

2015-01-01

Background While smoking is the major cause of chronic obstructive pulmonary disease (COPD), occupational exposures to vapors, gases, dusts, and fumes (VGDF) increase COPD risk. This case‐control study estimated the risk of COPD attributable to occupational exposures among construction workers. Methods The study population included 834 cases and 1243 controls participating in a national medical screening program for older construction workers between 1997 and 2013. Qualitative exposure indices were developed based on lifetime work and exposure histories. Results Approximately 18% (95%CI = 2–24%) of COPD risk can be attributed to construction‐related exposures, which are additive to the risk contributed by smoking. A measure of all VGDF exposures combined was a strong predictor of COPD risk. Conclusions Construction workers are at increased risk of COPD as a result of broad and complex effects of many exposures acting independently or interactively. Control methods should be implemented to prevent worker exposures, and smoking cessation should be promoted. Am. J. Ind. Med. 58:1083–1097, 2015. © 2015 The Authors. American Journal of Industrial Medicine Published by Wiley Periodicals, Inc. PMID:26123003

Construction schedule simulation of a diversion tunnel based on the optimized ventilation time.

PubMed

Wang, Xiaoling; Liu, Xuepeng; Sun, Yuefeng; An, Juan; Zhang, Jing; Chen, Hongchao

2009-06-15

Former studies, the methods for estimating the ventilation time are all empirical in construction schedule simulation. However, in many real cases of construction schedule, the many factors have impact on the ventilation time. Therefore, in this paper the 3D unsteady quasi-single phase models are proposed to optimize the ventilation time with different tunneling lengths. The effect of buoyancy is considered in the momentum equation of the CO transport model, while the effects of inter-phase drag, lift force, and virtual mass force are taken into account in the momentum source of the dust transport model. The prediction by the present model for airflow in a diversion tunnel is confirmed by the experimental values reported by Nakayama [Nakayama, In-situ measurement and simulation by CFD of methane gas distribution at a heading faces, Shigen-to-Sozai 114 (11) (1998) 769-775]. The construction ventilation of the diversion tunnel of XinTangfang power station in China is used as a case. The distributions of airflow, CO and dust in the diversion tunnel are analyzed. A theory method for GIS-based dynamic visual simulation for the construction processes of underground structure groups is presented that combines cyclic operation network simulation, system simulation, network plan optimization, and GIS-based construction processes' 3D visualization. Based on the ventilation time the construction schedule of the diversion tunnel is simulated by the above theory method.

AERIAL PHOTOGRAPHY AND GROUND VERIFICATION AT POWER PLANT SITES: WISCONSIN POWER PLANT IMPACT STUDY

EPA Science Inventory

This study demonstrated and evaluated nine methods for monitoring the deterioration of a large wetland on the site of a newly-constructed coal-fired power plant in Columbia, County, Wisconsin. Four of the nine methods used data from ground sampling; two were remote sensing method...

A novel, easy and rapid method for constructing yeast two-hybrid vectors using In-Fusion technology.

PubMed

Yu, Deshui; Liao, Libing; Zhang, Ju; Zhang, Yi; Xu, Kedong; Liu, Kun; Li, Xiaoli; Tan, Guangxuan; Chen, Ran; Wang, Yulu; Liu, Xia; Zhang, Xuan; Han, Xiaomeng; Wei, Zhangkun; Li, Chengwei

2018-05-01

Yeast two-hybrid systems are powerful tools for analyzing interactions between proteins. Vector construction is an essential step in yeast two-hybrid experiments, which require bait and prey plasmids. In this study, we modified the multiple cloning site sequence of the yeast plasmid pGADT7 by site-directed mutagenesis PCR to generate the pGADT7-In vector, which resulted in an easy and rapid method for constructing yeast two-hybrid vectors using the In-Fusion cloning technique. This method has three key advantages: only one pair of primers and one round of PCR are needed to generate bait and prey plasmids for each gene, it is restriction endonuclease- and ligase-independent, and it is fast and easily performed.

Methods for preventing ASR in new construction: results of field exposure sites.

DOT National Transportation Integrated Search

2013-12-01

As part of the FHWA ASR Development and Deployment Program, two sites were built to study ASR in new concrete construction. Concrete blocks were produced with a range of aggregates and cementitious materials and placed on outdoor exposure sites at th...

The Boston-area HASWIC Research Circle: an innovative participatory method for coloring in the picture of a special work environment.

PubMed

Moir, Susan; Azaroff, Lenore S

2007-01-01

Recent qualitative studies have investigated some of the hazards affecting women in non-traditional trades such as construction. However, one-time interactions among researcher participants, and between researchers and participants, in standard settings such as focus groups and interviews, cannot provide the time, space, and relationships to fully explore tradeswomen's in-depth knowledge of their work environment. This study applied a Scandinavian method called the Research Circle to convene a group of experienced women construction workers repeatedly over a period of two years so they could collaborate with researchers in explaining workplace issues. The results both validated and expanded upon previous findings about health and safety for women in construction, including gender discrimination, lack of access to sanitary facilities, retaliation for reporting hazards and injuries, and inadequate training and equipment. Especially important, findings illustrate some of the complex hierarchical social structures involved in both female and male construction workers responding to hazardous conditions.

Development, Construction, and Content Validation of a Questionnaire to Test Mobile Shower Commode Usability

PubMed Central

Theodoros, Deborah G.; Russell, Trevor G.

2015-01-01

Background: Usability is an emerging domain of outcomes measurement in assistive technology provision. Currently, no questionnaires exist to test the usability of mobile shower commodes (MSCs) used by adults with spinal cord injury (SCI). Objective: To describe the development, construction, and initial content validation of an electronic questionnaire to test mobile shower commode usability for this population. Methods: The questionnaire was constructed using a mixed-methods approach in 5 phases: determining user preferences for the questionnaire’s format, developing an item bank of usability indicators from the literature and judgement of experts, constructing a preliminary questionnaire, assessing content validity with a panel of experts, and constructing the final questionnaire. Results: The electronic Mobile Shower Commode Assessment Tool Version 1.0 (eMAST 1.0) questionnaire tests MSC features and performance during activities identified using a mixed-methods approach and in consultation with users. It confirms that usability is complex and multidimensional. The final questionnaire contains 25 questions in 3 sections. The eMAST 1.0 demonstrates excellent content validity as determined by a small sample of expert clinicians. Conclusion: The eMAST 1.0 tests usability of MSCs from the perspective of adults with SCI and may be used to solicit feedback during MSC design, assessment, prescription, and ongoing use. Further studies assessing the eMAST’s psychometric properties, including studies with users of MSCs, are needed. PMID:25762862

CINAHL: an exploratory analysis of the current status of nursing theory construction as reflected by the electronic domain.

PubMed

Riddlesperger, K L; Beard, M; Flowers, D L; Hisley, S M; Pfeifer, K A; Stiller, J J

1996-09-01

Since the 1980s the electronic domain has become the primary method for academic and professional communication of research and information. Papers relating to theory construction in nursing are a frequently occurring phenomenon within the electronic domain. Theory construction provides the underpinning for the advancement of professional nursing, facilitating the conceptualization of nursing actions leading to theory-based practice and research. The purpose of this study was to address the research question, 'What are the similarities and differences among theory construction papers that are accessible electronically in nursing literature today?' The Cumulative Index to Nursing and Allied Health Literature (CINAHL) was accessed to obtain a listing of papers from which an overall description of the type of theory construction papers being published in the nursing literature today could be determined. A literature search was conducted using the description 'theory construction'. Papers were limited to publication years from 1990 onwards. A total of 125 papers were obtained and read by one of the six authors. Using grounded theory, categories emerged by identification of similarities and differences among the papers. The findings are discussed here along with suggestions for further study. A second purpose of this paper was to present both traditional and non-traditional methods of tapping into the electronic domain when searching for assistance with theory construction.

The construct validity of session RPE during an intensive camp in young male Karate athletes.

PubMed

Padulo, Johnny; Chaabène, Helmi; Tabben, Montassar; Haddad, Monoem; Gevat, Cecilia; Vando, Stefano; Maurino, Lucio; Chaouachi, Anis; Chamari, Karim

2014-04-01

the aim of this study was to assess the validity of the session rating of perceived exertion (RPE) method and two objective HR-based methods for quantifying karate's training load (TL) in young Karatekas. eleven athletes (age 12.50±1.84 years) participated in this study. The training period/camp was performed on 5 consecutive days with two training session (s) per-day (d). Construct validity of RPE method in young Karate athletes, was studied by correlation analysis between RPE session's training load and both Edwards and Banister's training impulse score' method. significant relationship was found between inter-day (n-11 × d-5 × s-2 = 110) sessions RPE and Edwards (r values from 0.84 to 0.92 p < 0.001) and Banister's (r values from 0.84 to 0.97 p < 0.001), respectively. this study showed that session-RPE can be considered a valid method for quantifying karate's training load in young karate athletes.

A survival tree method for the analysis of discrete event times in clinical and epidemiological studies.

PubMed

Schmid, Matthias; Küchenhoff, Helmut; Hoerauf, Achim; Tutz, Gerhard

2016-02-28

Survival trees are a popular alternative to parametric survival modeling when there are interactions between the predictor variables or when the aim is to stratify patients into prognostic subgroups. A limitation of classical survival tree methodology is that most algorithms for tree construction are designed for continuous outcome variables. Hence, classical methods might not be appropriate if failure time data are measured on a discrete time scale (as is often the case in longitudinal studies where data are collected, e.g., quarterly or yearly). To address this issue, we develop a method for discrete survival tree construction. The proposed technique is based on the result that the likelihood of a discrete survival model is equivalent to the likelihood of a regression model for binary outcome data. Hence, we modify tree construction methods for binary outcomes such that they result in optimized partitions for the estimation of discrete hazard functions. By applying the proposed method to data from a randomized trial in patients with filarial lymphedema, we demonstrate how discrete survival trees can be used to identify clinically relevant patient groups with similar survival behavior. Copyright © 2015 John Wiley & Sons, Ltd.

Nuclear gauge application in road industry

NASA Astrophysics Data System (ADS)

Azmi Ismail, Mohd

2017-11-01

Soil compaction is essential in road construction. The evaluation of the degree of compaction relies on the knowledge of density and moisture of the compacted layers is very important to the performance of the pavement structure. Among the various tests used for making these determinations, the sand replacement density test and the moisture content determination by oven drying are perhaps the most widely used. However, these methods are not only time consuming and need wearisome procedures to obtain the results but also destructive and the number of measurements that can be taken at any time is limited. The test can on be fed back to the construction site the next day. To solve these problems, a nuclear technique has been introduced as a quicker and easier way of measuring the density and moisture of construction materials. Nuclear moisture density gauges have been used for many years in pavement construction as a method of non-destructive density testing The technique which can determine both wet density and moisture content offers an in situ method for construction control at the work site. The simplicity, the speed, and non-destructive nature offer a great advantage for quality control. This paper provides an overview of nuclear gauge application in road construction and presents a case study of monitoring compaction status of in Sedenak - Skudai, Johor rehabilitation projects.

Research on carbon emission driving factors of China’s provincial construction industry

NASA Astrophysics Data System (ADS)

Shang, Mei; Dong, Rui; Fu, Yujie; Hao, Wentao

2018-03-01

As a pillar industry of the national economy, the damage to the environment by construction industry can not be ignored. In the context of low carbon development, identifying the main driving factors for the carbon emission of the provincial construction industry are the key for the local government to formulate the development strategy for construction. In the paper, based on the Kaya factor decomposition method, the carbon intensity of the energy structure, energy intensity and the impact of the construction output on the carbon emission of provincial construction industry are studied, and relevant suggestions for low carbon development of provincial construction industry are proposed. The conclusion of this paper provides a theoretical basis for the early realization of low-carbon development in China’s provincial construction industry.

Developing Better Methods for Obtaining Long-Term (Debt) Financing for Expansion of Physical Facilities at Small, Nonprofit, Traditional Midwestern Colleges.

ERIC Educational Resources Information Center

Westin, Charles A.

This research explored the problem of private colleges borrowing money to pay for construction of needed buildings. The study revealed that most colleges had borrowed money in the past for construction. About two-thirds of those foresaw further construction, and one-half of those who planned to build also planned to borrow to meet part of the cost…

13 CFR 305.6 - Allowable methods of procurement for construction services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Approved Projects § 305.6 Allowable methods of procurement for construction services. (a) Recipients may use alternate construction procurement methods to the traditional design/bid/build procedures... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Allowable methods of procurement...

Homeland Security Collaboration: Catch Phrase or Preeminent Organizational Construct?

DTIC Science & Technology

2009-09-01

collaborative effort? C. RESEARCH METHODOLOGY This research project utilized a modified case study methodology. The traditional case study method ...discussing the research method , offering smart practices and culminate with findings and recommendations. Chapter II Homeland Security Collaboration...41 Centers for Regional Excellence, “Building Models.” 16 Chapter III Research Methodology:  Modified Case Study Method is

College Students Constructing Collective Knowledge of Natural Science History in a Collaborative Knowledge Building Community

ERIC Educational Resources Information Center

Hong, Huang-Yao; Chai, Ching Sing; Tsai, Chin-Chung

2015-01-01

This study investigates whether engaging college students (n = 42) in a knowledge building environment would help them work as a community to construct their collective knowledge of history of science and, accordingly, develop a more informed scientific view. The study adopted mixed-method analyses and data mainly came from surveys and student…

Constructing a Measure for Longitudinal Medical Achievement Studies by the Rasch Model One-Step Equating.

ERIC Educational Resources Information Center

Shen, Linjun

As part of a longitudinal study of the growth of general medical knowledge among osteopathic medical students, a simple, convenient, and accurate vertical equating method was developed for constructing a scale for medical achievement. It was believed that Parts 1, 2, and 3 of the National Board of Osteopathic Medical Examiners' (NBOME) examination…

Effect of Items Direction (Positive or Negative) on the Factorial Construction and Criterion Related Validity in Likert Scale

ERIC Educational Resources Information Center

Naji Qasem, Mamun Ali; Ahmad Gul, Showkeen Bilal

2014-01-01

The study was conducted to know the effect of items direction (positive or negative) on the factorial construction and criterion related validity in Likert scale. The descriptive survey research method was used for the study and the sample consisted of 510 undergraduate students selected by used random sampling technique. A scale developed by…

Automated building of organometallic complexes from 3D fragments.

PubMed

Foscato, Marco; Venkatraman, Vishwesh; Occhipinti, Giovanni; Alsberg, Bjørn K; Jensen, Vidar R

2014-07-28

A method for the automated construction of three-dimensional (3D) molecular models of organometallic species in design studies is described. Molecular structure fragments derived from crystallographic structures and accurate molecular-level calculations are used as 3D building blocks in the construction of multiple molecular models of analogous compounds. The method allows for precise control of stereochemistry and geometrical features that may otherwise be very challenging, or even impossible, to achieve with commonly available generators of 3D chemical structures. The new method was tested in the construction of three sets of active or metastable organometallic species of catalytic reactions in the homogeneous phase. The performance of the method was compared with those of commonly available methods for automated generation of 3D models, demonstrating higher accuracy of the prepared 3D models in general, and, in particular, a much wider range with respect to the kind of chemical structures that can be built automatically, with capabilities far beyond standard organic and main-group chemistry.

Semi top-down method combined with earth-bank, an effective method for basement construction.

NASA Astrophysics Data System (ADS)

Tuan, B. Q.; Tam, Ng M.

2018-04-01

Choosing an appropriate method of deep excavation not only plays a decisive role in technical success, but also in economics of the construction project. Presently, we mainly base on to key methods: “Bottom-up” and “Top-down” construction method. Right now, this paper presents an another method of construction that is “Semi Top-down method combining with earth-bank” in order to take the advantages and limit the weakness of the above methods. The Bottom-up method was improved by using the earth-bank to stabilize retaining walls instead of the bracing steel struts. The Top-down method was improved by using the open cut method for the half of the earthwork quantities.

13 CFR 305.6 - Allowable methods of procurement for construction services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Approved Projects § 305.6 Allowable methods of procurement for construction services. (a) Recipients may... design/build, construction management at risk and force account. If an alternate method is used, the... 13 Business Credit and Assistance 1 2011-01-01 2011-01-01 false Allowable methods of procurement...

A transformation method for constrained-function minimization

NASA Technical Reports Server (NTRS)

Park, S. K.

1975-01-01

A direct method for constrained-function minimization is discussed. The method involves the construction of an appropriate function mapping all of one finite dimensional space onto the region defined by the constraints. Functions which produce such a transformation are constructed for a variety of constraint regions including, for example, those arising from linear and quadratic inequalities and equalities. In addition, the computational performance of this method is studied in the situation where the Davidon-Fletcher-Powell algorithm is used to solve the resulting unconstrained problem. Good performance is demonstrated for 19 test problems by achieving rapid convergence to a solution from several widely separated starting points.

A novel construction method of QC-LDPC codes based on CRT for optical communications

NASA Astrophysics Data System (ADS)

Yuan, Jian-guo; Liang, Meng-qi; Wang, Yong; Lin, Jin-zhao; Pang, Yu

2016-05-01

A novel construction method of quasi-cyclic low-density parity-check (QC-LDPC) codes is proposed based on Chinese remainder theory (CRT). The method can not only increase the code length without reducing the girth, but also greatly enhance the code rate, so it is easy to construct a high-rate code. The simulation results show that at the bit error rate ( BER) of 10-7, the net coding gain ( NCG) of the regular QC-LDPC(4 851, 4 546) code is respectively 2.06 dB, 1.36 dB, 0.53 dB and 0.31 dB more than those of the classic RS(255, 239) code in ITU-T G.975, the LDPC(32 640, 30 592) code in ITU-T G.975.1, the QC-LDPC(3 664, 3 436) code constructed by the improved combining construction method based on CRT and the irregular QC-LDPC(3 843, 3 603) code constructed by the construction method based on the Galois field ( GF( q)) multiplicative group. Furthermore, all these five codes have the same code rate of 0.937. Therefore, the regular QC-LDPC(4 851, 4 546) code constructed by the proposed construction method has excellent error-correction performance, and can be more suitable for optical transmission systems.

A Study on Ganui-Dae's External Form and Its Modeling for Ganui-Dae's External Form and Its Modeling for Restoration

NASA Astrophysics Data System (ADS)

Lee, Min-Soo; Lee, Yong Sam; Jeon, Jun Hyeok; Kim, Sang Hyuk

2013-12-01

Ganui-Dae, built in the reign of King Sejong, Joseon Dynasty, is a comprehensive observatory. It has various instruments for observation and time signal such as Ganui, Gyupyo(Gnomon), water-hammering type Honui and Honsang, and so on. Studying on Ganui-Dae has been focused on its location, history, criterion, etc, so far. However, studying on its external form and construction method has been conducted insufficiently. This study suggests the model for restoration of Ganui-Dae. The model is based on the analysis about external form of Ganui-Dae in various antique maps, and its construction method in those days.

Using constructive alignment theory to develop nursing skills curricula.

PubMed

Joseph, Sundari; Juwah, Charles

2012-01-01

Constructive alignment theory has been used to underpin the development of curricula in higher education for some time (Biggs and Tang, 2007), however, its use to inform and determine skills curricula in nursing is less well documented. This paper explores the use of constructive alignment theory within a study of undergraduate student nurses undertaking clinical skill acquisition in the final year of a BSc (Hons) Nursing course. Students were followed up as newly qualified nurses (NQN) (n = 58) to ascertain the impact of skill acquisition in this way. Comparisons were made with newly qualified nurses who did not participate in a constructively aligned curriculum. This mixed methods study reported skill identification within the immediate post-registration period and evaluated the constructively aligned curriculum as having positive benefits for NQNs in terms of confidence to practice. This was supported by preceptors' views. The study recommends two process models for nursing skills curriculum development and reports that constructive alignment is a useful theoretical framework for nurse educators. Copyright © 2011 Elsevier Ltd. All rights reserved.

Non-smoking worksites in the residential construction sector: using an online forum to study perspectives and practices

PubMed Central

Bercovitz, Kim L

2010-01-01

Objectives Blue-collar workers are a recognised priority for tobacco control. Construction workers have very high smoking rates and are difficult to study and reach with interventions promoting smoke-free workplaces and cessation. The objectives of this study were to explore the smoking-related social climate in the North American residential construction sector and to identify potential barriers and facilitators to creating smokefree worksites. Methods The data source used was a popular internet forum on home building. Participants included a broad and unselected population of employers, employees and freelance tradespersons working in residential construction. The forum archive contained 10 years of discourse on the subjects of smoking, workplace secondhand smoke and smoking restrictions on construction sites. Qualitative data analysis methods were used to describe major and minor discussion themes relevant to workplace smoking culture and policies in this sector. Results Participants described considerable tension between smoking and non-smoking tradespersons, but there was also much interpersonal support for cessation and support for non-smokers' rights. Employers and employees described efforts to make construction sites smoke free, and a movement towards preferential hiring of non-smoking tradespersons was discussed. Board participants wanted detailed scientific evidence on secondhand smoke exposure levels and risk thresholds, particularly in open-air workplaces. Conclusions Experience with success of smoking bans in other challenging workplaces can be applied to the construction sector. Potential movement of smokers out of the workforce represents a challenge for public health systems to ensure equitable access to cessation supports and services. PMID:21118847

Kentucky highway rating system

DOT National Transportation Integrated Search

2003-03-01

This study had two goals: 1. Formulate a new method for generating roadway adequacy ratings; 2. Construct an appropriate data set and then test the method by comparing it to the results of the HPMS-AP method. The recommended methodology builds on the...

Algorithm for constructing the programmed motion of a bounding vehicle for the flight phase

NASA Technical Reports Server (NTRS)

Lapshin, V. V.

1979-01-01

The construction of the programmed motion of a multileg bounding vehicle in the flight was studied. An algorithm is given for solving the boundary value problem for constructing this programmed motion. If the motion is shown to be symmetrical, a simplified use of the algorithm can be applied. A method is proposed for nonimpact of the legs during lift-off of the vehicle, and for softness at touchdown. Tables are utilized to construct this programmed motion over a broad set of standard motion conditions.

Realist theory construction for a mixed method multilevel study of neighbourhood context and postnatal depression.

PubMed

Eastwood, John G; Kemp, Lynn A; Jalaludin, Bin B

2016-01-01

We have recently described a protocol for a study that aims to build a theory of neighbourhood context and postnatal depression. That protocol proposed a critical realist Explanatory Theory Building Method comprising of an: (1) emergent phase, (2) construction phase, and (3) confirmatory phase. A concurrent triangulated mixed method multilevel cross-sectional study design was described. The protocol also described in detail the Theory Construction Phase which will be presented here. The Theory Construction Phase will include: (1) defining stratified levels; (2) analytic resolution; (3) abductive reasoning; (4) comparative analysis (triangulation); (5) retroduction; (6) postulate and proposition development; (7) comparison and assessment of theories; and (8) conceptual frameworks and model development. The stratified levels of analysis in this study were predominantly social and psychological. The abductive analysis used the theoretical frames of: Stress Process; Social Isolation; Social Exclusion; Social Services; Social Capital, Acculturation Theory and Global-economic level mechanisms. Realist propositions are presented for each analysis of triangulated data. Inference to best explanation is used to assess and compare theories. A conceptual framework of maternal depression, stress and context is presented that includes examples of mechanisms at psychological, social, cultural and global-economic levels. Stress was identified as a necessary mechanism that has the tendency to cause several outcomes including depression, anxiety, and health harming behaviours. The conceptual framework subsequently included conditional mechanisms identified through the retroduction including the stressors of isolation and expectations and buffers of social support and trust. The meta-theory of critical realism is used here to generate and construct social epidemiological theory using stratified ontology and both abductive and retroductive analysis. The findings will be applied to the development of a middle range theory and subsequent programme theory for local perinatal child and family interventions.

John Butcher and hybrid methods

NASA Astrophysics Data System (ADS)

Mehdiyeva, Galina; Imanova, Mehriban; Ibrahimov, Vagif

2017-07-01

As is known there are the mainly two classes of the numerical methods for solving ODE, which is commonly called a one and multistep methods. Each of these methods has certain advantages and disadvantages. It is obvious that the method which has better properties of these methods should be constructed at the junction of them. In the middle of the XX century, Butcher and Gear has constructed at the junction of the methods of Runge-Kutta and Adams, which is called hybrid method. Here considers the construction of certain generalizations of hybrid methods, with the high order of accuracy and to explore their application to solving the Ordinary Differential, Volterra Integral and Integro-Differential equations. Also have constructed some specific hybrid methods with the degree p ≤ 10.

Construction Performance Optimization toward Green Building Premium Cost Based on Greenship Rating Tools Assessment with Value Engineering Method

NASA Astrophysics Data System (ADS)

Latief, Yusuf; Berawi, Mohammed Ali; Basten, Van; Riswanto; Budiman, Rachmat

2017-07-01

Green building concept becomes important in current building life cycle to mitigate environment issues. The purpose of this paper is to optimize building construction performance towards green building premium cost, achieving green building rating tools with optimizing life cycle cost. Therefore, this study helps building stakeholder determining building fixture to achieve green building certification target. Empirically the paper collects data of green building in the Indonesian construction industry such as green building fixture, initial cost, operational and maintenance cost, and certification score achievement. After that, using value engineering method optimized green building fixture based on building function and cost aspects. Findings indicate that construction performance optimization affected green building achievement with increasing energy and water efficiency factors and life cycle cost effectively especially chosen green building fixture.

Mortality table construction

NASA Astrophysics Data System (ADS)

Sutawanir

2015-12-01

Mortality tables play important role in actuarial studies such as life annuities, premium determination, premium reserve, valuation pension plan, pension funding. Some known mortality tables are CSO mortality table, Indonesian Mortality Table, Bowers mortality table, Japan Mortality table. For actuary applications some tables are constructed with different environment such as single decrement, double decrement, and multiple decrement. There exist two approaches in mortality table construction : mathematics approach and statistical approach. Distribution model and estimation theory are the statistical concepts that are used in mortality table construction. This article aims to discuss the statistical approach in mortality table construction. The distributional assumptions are uniform death distribution (UDD) and constant force (exponential). Moment estimation and maximum likelihood are used to estimate the mortality parameter. Moment estimation methods are easier to manipulate compared to maximum likelihood estimation (mle). However, the complete mortality data are not used in moment estimation method. Maximum likelihood exploited all available information in mortality estimation. Some mle equations are complicated and solved using numerical methods. The article focus on single decrement estimation using moment and maximum likelihood estimation. Some extension to double decrement will introduced. Simple dataset will be used to illustrated the mortality estimation, and mortality table.

Enhancing prediction power of chemometric models through manipulation of the fed spectrophotometric data: A comparative study

NASA Astrophysics Data System (ADS)

Saad, Ahmed S.; Hamdy, Abdallah M.; Salama, Fathy M.; Abdelkawy, Mohamed

2016-10-01

Effect of data manipulation in preprocessing step proceeding construction of chemometric models was assessed. The same set of UV spectral data was used for construction of PLS and PCR models directly and after mathematically manipulation as per well known first and second derivatives of the absorption spectra, ratio spectra and first and second derivatives of the ratio spectra spectrophotometric methods, meanwhile the optimal working wavelength ranges were carefully selected for each model and the models were constructed. Unexpectedly, number of latent variables used for models' construction varied among the different methods. The prediction power of the different models was compared using a validation set of 8 mixtures prepared as per the multilevel multifactor design and results were statistically compared using two-way ANOVA test. Root mean squares error of prediction (RMSEP) was used for further comparison of the predictability among different constructed models. Although no significant difference was found between results obtained using Partial Least Squares (PLS) and Principal Component Regression (PCR) models, however, discrepancies among results was found to be attributed to the variation in the discrimination power of adopted spectrophotometric methods on spectral data.

The construct validity of session RPE during an intensive camp in young male Karate athletes

PubMed Central

Padulo, Johnny; Chaabène, Helmi; Tabben, Montassar; Haddad, Monoem; Gevat, Cecilia; Vando, Stefano; Maurino, Lucio; Chaouachi, Anis; Chamari, Karim

2014-01-01

Summary Background: the aim of this study was to assess the validity of the session rating of perceived exertion (RPE) method and two objective HR-based methods for quantifying karate’s training load (TL) in young Karatekas. Methods: eleven athletes (age 12.50±1.84 years) participated in this study. The training period/camp was performed on 5 consecutive days with two training session (s) per-day (d). Construct validity of RPE method in young Karate athletes, was studied by correlation analysis between RPE session’s training load and both Edwards and Banister’s training impulse score’ method. Results: significant relationship was found between inter-day (n-11 × d-5 × s-2 = 110) sessions RPE and Edwards (r values from 0.84 to 0.92 p < 0.001) and Banister’s (r values from 0.84 to 0.97 p < 0.001), respectively Conclusion: this study showed that session-RPE can be considered a valid method for quantifying karate’s training load in young karate athletes. PMID:25332921

Safety Early Warning Research for Highway Construction Based on Case-Based Reasoning and Variable Fuzzy Sets

PubMed Central

Liu, Yan; Xu, Zhen-Jun

2013-01-01

As a high-risk subindustry involved in construction projects, highway construction safety has experienced major developments in the past 20 years, mainly due to the lack of safe early warnings in Chinese construction projects. By combining the current state of early warning technology with the requirements of the State Administration of Work Safety and using case-based reasoning (CBR), this paper expounds on the concept and flow of highway construction safety early warnings based on CBR. The present study provides solutions to three key issues, index selection, accident cause association analysis, and warning degree forecasting implementation, through the use of association rule mining, support vector machine classifiers, and variable fuzzy qualitative and quantitative change criterion modes, which fully cover the needs of safe early warning systems. Using a detailed description of the principles and advantages of each method and by proving the methods' effectiveness and ability to act together in safe early warning applications, effective means and intelligent technology for a safe highway construction early warning system are established. PMID:24191134

Safety early warning research for highway construction based on case-based reasoning and variable fuzzy sets.

PubMed

Liu, Yan; Yi, Ting-Hua; Xu, Zhen-Jun

2013-01-01

As a high-risk subindustry involved in construction projects, highway construction safety has experienced major developments in the past 20 years, mainly due to the lack of safe early warnings in Chinese construction projects. By combining the current state of early warning technology with the requirements of the State Administration of Work Safety and using case-based reasoning (CBR), this paper expounds on the concept and flow of highway construction safety early warnings based on CBR. The present study provides solutions to three key issues, index selection, accident cause association analysis, and warning degree forecasting implementation, through the use of association rule mining, support vector machine classifiers, and variable fuzzy qualitative and quantitative change criterion modes, which fully cover the needs of safe early warning systems. Using a detailed description of the principles and advantages of each method and by proving the methods' effectiveness and ability to act together in safe early warning applications, effective means and intelligent technology for a safe highway construction early warning system are established.

Comprehensive evaluation of environmental and economic benefits of China's urban underground transportation construction projects.

PubMed

Yang, Xiaobin; Chen, Zhilong; Guo, Dongjun

2015-07-01

Urban underground transportation projects are introduced to address problems of scarce green land and traffic pollution. As construction of urban underground transportation is still in its infancy, there is no definite quantitative measurement on whether the construction is beneficial and what influences it will place on the region in China. This study intends to construct a comprehensive evaluation method for evaluating social, economic and environmental benefits of urban underground transportation projects and proposes the concept, role and principle for evaluation of environmental and economic benefits. It figures out relationship between the environment and factors of city development. It also summarizes three relevant factors, including transportation, biophysics and social economy, and works out indicators to evaluate the influence of urban underground transportation construction. Based on Contingent Valuation Method (CVM), Cost of Illness Approach (CIA), Human Capital Approach (HCA), this paper constructs 13 monetization calculation models for social, economic and environmental benefits in response to seven aspects, namely, reducing noise pollution and air pollution, using land efficiently, improving traffic safety, reducing traffic congestion, saving shipping time and minimizing transportation costs.

A Systematic Method of Integrating BIM and Sensor Technology for Sustainable Construction Design

NASA Astrophysics Data System (ADS)

Liu, Zhen; Deng, Zhiyu

2017-10-01

Building Information Modeling (BIM) has received lots of attention of construction field, and sensor technology was applied in construction data collection. This paper developed a method to integrate BIM and sensor technology for sustainable construction design. A brief literature review was conducted to clarify the current development of BIM and sensor technology; then a systematic method for integrating BIM and sensor technology to realize sustainable construction design was put forward; finally a brief discussion and conclusion was given.

Pesticide applicators questionnaire content validation: A fuzzy delphi method.

PubMed

Manakandan, S K; Rosnah, I; Mohd Ridhuan, J; Priya, R

2017-08-01

The most crucial step in forming a set of survey questionnaire is deciding the appropriate items in a construct. Retaining irrelevant items and removing important items will certainly mislead the direction of a particular study. This article demonstrates Fuzzy Delphi method as one of the scientific analysis technique to consolidate consensus agreement within a panel of experts pertaining to each item's appropriateness. This method reduces the ambiguity, diversity, and discrepancy of the opinions among the experts hence enhances the quality of the selected items. The main purpose of this study was to obtain experts' consensus on the suitability of the preselected items on the questionnaire. The panel consists of sixteen experts from the Occupational and Environmental Health Unit of Ministry of Health, Vector-borne Disease Control Unit of Ministry of Health and Occupational and Safety Health Unit of both public and private universities. A set of questionnaires related to noise and chemical exposure were compiled based on the literature search. There was a total of six constructs with 60 items in which three constructs for knowledge, attitude, and practice of noise exposure and three constructs for knowledge, attitude, and practice of chemical exposure. The validation process replicated recent Fuzzy Delphi method that using a concept of Triangular Fuzzy Numbers and Defuzzification process. A 100% response rate was obtained from all the sixteen experts with an average Likert scoring of four to five. Post FDM analysis, the first prerequisite was fulfilled with a threshold value (d) ≤ 0.2, hence all the six constructs were accepted. For the second prerequisite, three items (21%) from noise-attitude construct and four items (40%) from chemical-practice construct had expert consensus lesser than 75%, which giving rise to about 12% from the total items in the questionnaire. The third prerequisite was used to rank the items within the constructs by calculating the average fuzzy numbers. The seven items which did not fulfill the second prerequisite similarly had lower ranks during the analysis, therefore those items were discarded from the final draft. Post FDM analysis, the experts' consensus on the suitability of the pre-selected items on the questionnaire set were obtained, hence it is now ready for further construct validation process.

Optimization of rotor shaft shrink fit method for motor using "Robust design"

NASA Astrophysics Data System (ADS)

Toma, Eiji

2018-01-01

This research is collaborative investigation with the general-purpose motor manufacturer. To review construction method in production process, we applied the parameter design method of quality engineering and tried to approach the optimization of construction method. Conventionally, press-fitting method has been adopted in process of fitting rotor core and shaft which is main component of motor, but quality defects such as core shaft deflection occurred at the time of press fitting. In this research, as a result of optimization design of "shrink fitting method by high-frequency induction heating" devised as a new construction method, its construction method was feasible, and it was possible to extract the optimum processing condition.

Geometry control of long-span continuous girder concrete bridge during construction through finite element model updating

NASA Astrophysics Data System (ADS)

Wu, Jie; Yan, Quan-sheng; Li, Jian; Hu, Min-yi

2016-04-01

In bridge construction, geometry control is critical to ensure that the final constructed bridge has the consistent shape as design. A common method is by predicting the deflections of the bridge during each construction phase through the associated finite element models. Therefore, the cambers of the bridge during different construction phases can be determined beforehand. These finite element models are mostly based on the design drawings and nominal material properties. However, the accuracy of these bridge models can be large due to significant uncertainties of the actual properties of the materials used in construction. Therefore, the predicted cambers may not be accurate to ensure agreement of bridge geometry with design, especially for long-span bridges. In this paper, an improved geometry control method is described, which incorporates finite element (FE) model updating during the construction process based on measured bridge deflections. A method based on the Kriging model and Latin hypercube sampling is proposed to perform the FE model updating due to its simplicity and efficiency. The proposed method has been applied to a long-span continuous girder concrete bridge during its construction. Results show that the method is effective in reducing construction error and ensuring the accuracy of the geometry of the final constructed bridge.

Constructing Occupational Identities: How Female Preschool Teachers Develop Professionalism

ERIC Educational Resources Information Center

Kim, Mina

2013-01-01

This study explores how female teachers construct their occupational identities as teachers within early childhood education (ECE) settings. The combination of feminist scholarship and the use of teacher life history method allow these women to describe themselves as professionally trained and educated teachers who love teaching and children even…

Construct Validation of Content Standards for Teaching

ERIC Educational Resources Information Center

van der Schaaf, Marieke F.; Stokking, Karel M.

2011-01-01

Current international demands to strengthen the teaching profession have led to an increased development and use of professional content standards. The study aims to provide insight in the construct validity of content standards by researching experts' underlying assumptions and preferences when participating in a delphi method. In three rounds 21…

Weighting and Aggregation in Composite Indicator Construction: A Multiplicative Optimization Approach

ERIC Educational Resources Information Center

Zhou, P.; Ang, B. W.; Zhou, D. Q.

2010-01-01

Composite indicators (CIs) have increasingly been accepted as a useful tool for benchmarking, performance comparisons, policy analysis and public communication in many different fields. Several recent studies show that as a data aggregation technique in CI construction the weighted product (WP) method has some desirable properties. However, a…

Constructing Knowledge Bases: A Promising Instructional Tool.

ERIC Educational Resources Information Center

Trollip, Stanley R.; Lippert, Renate C.

1987-01-01

Argues that construction of knowledge bases is an instructional tool that encourages students' critical thinking in problem solving situations through metacognitive experiences. A study is described in which college students created expert systems to test the effectiveness of this method of instruction, and benefits for students and teachers are…

Issues in the construction of wealth indices for the measurement of socio-economic position in low-income countries

PubMed Central

Howe, Laura D; Hargreaves, James R; Huttly, Sharon RA

2008-01-01

Background Epidemiological studies often require measures of socio-economic position (SEP). The application of principal components analysis (PCA) to data on asset-ownership is one popular approach to household SEP measurement. Proponents suggest that the approach provides a rational method for weighting asset data in a single indicator, captures the most important aspect of SEP for health studies, and is based on data that are readily available and/or simple to collect. However, the use of PCA on asset data may not be the best approach to SEP measurement. There remains concern that this approach can obscure the meaning of the final index and is statistically inappropriate for use with discrete data. In addition, the choice of assets to include and the level of agreement between wealth indices and more conventional measures of SEP such as consumption expenditure remain unclear. We discuss these issues, illustrating our examples with data from the Malawi Integrated Household Survey 2004–5. Methods Wealth indices were constructed using the assets on which data are collected within Demographic and Health Surveys. Indices were constructed using five weighting methods: PCA, PCA using dichotomised versions of categorical variables, equal weights, weights equal to the inverse of the proportion of households owning the item, and Multiple Correspondence Analysis. Agreement between indices was assessed. Indices were compared with per capita consumption expenditure, and the difference in agreement assessed when different methods were used to adjust consumption expenditure for household size and composition. Results All indices demonstrated similarly modest agreement with consumption expenditure. The indices constructed using dichotomised data showed strong agreement with each other, as did the indices constructed using categorical data. Agreement was lower between indices using data coded in different ways. The level of agreement between wealth indices and consumption expenditure did not differ when different consumption equivalence scales were applied. Conclusion This study questions the appropriateness of wealth indices as proxies for consumption expenditure. The choice of data included had a greater influence on the wealth index than the method used to weight the data. Despite the limitations of PCA, alternative methods also all had disadvantages. PMID:18234082

Objective assessment based on motion-related metrics and technical performance in laparoscopic suturing.

PubMed

Sánchez-Margallo, Juan A; Sánchez-Margallo, Francisco M; Oropesa, Ignacio; Enciso, Silvia; Gómez, Enrique J

2017-02-01

The aim of this study is to present the construct and concurrent validity of a motion-tracking method of laparoscopic instruments based on an optical pose tracker and determine its feasibility as an objective assessment tool of psychomotor skills during laparoscopic suturing. A group of novice ([Formula: see text] laparoscopic procedures), intermediate (11-100 laparoscopic procedures) and experienced ([Formula: see text] laparoscopic procedures) surgeons performed three intracorporeal sutures on an ex vivo porcine stomach. Motion analysis metrics were recorded using the proposed tracking method, which employs an optical pose tracker to determine the laparoscopic instruments' position. Construct validation was measured for all 10 metrics across the three groups and between pairs of groups. Concurrent validation was measured against a previously validated suturing checklist. Checklists were completed by two independent surgeons over blinded video recordings of the task. Eighteen novices, 15 intermediates and 11 experienced surgeons took part in this study. Execution time and path length travelled by the laparoscopic dissector presented construct validity. Experienced surgeons required significantly less time ([Formula: see text]), travelled less distance using both laparoscopic instruments ([Formula: see text]) and made more efficient use of the work space ([Formula: see text]) compared with novice and intermediate surgeons. Concurrent validation showed strong correlation between both the execution time and path length and the checklist score ([Formula: see text] and [Formula: see text], [Formula: see text]). The suturing performance was successfully assessed by the motion analysis method. Construct and concurrent validity of the motion-based assessment method has been demonstrated for the execution time and path length metrics. This study demonstrates the efficacy of the presented method for objective evaluation of psychomotor skills in laparoscopic suturing. However, this method does not take into account the quality of the suture. Thus, future works will focus on developing new methods combining motion analysis and qualitative outcome evaluation to provide a complete performance assessment to trainees.

Confidence intervals for the population mean tailored to small sample sizes, with applications to survey sampling.

PubMed

Rosenblum, Michael A; Laan, Mark J van der

2009-01-07

The validity of standard confidence intervals constructed in survey sampling is based on the central limit theorem. For small sample sizes, the central limit theorem may give a poor approximation, resulting in confidence intervals that are misleading. We discuss this issue and propose methods for constructing confidence intervals for the population mean tailored to small sample sizes. We present a simple approach for constructing confidence intervals for the population mean based on tail bounds for the sample mean that are correct for all sample sizes. Bernstein's inequality provides one such tail bound. The resulting confidence intervals have guaranteed coverage probability under much weaker assumptions than are required for standard methods. A drawback of this approach, as we show, is that these confidence intervals are often quite wide. In response to this, we present a method for constructing much narrower confidence intervals, which are better suited for practical applications, and that are still more robust than confidence intervals based on standard methods, when dealing with small sample sizes. We show how to extend our approaches to much more general estimation problems than estimating the sample mean. We describe how these methods can be used to obtain more reliable confidence intervals in survey sampling. As a concrete example, we construct confidence intervals using our methods for the number of violent deaths between March 2003 and July 2006 in Iraq, based on data from the study "Mortality after the 2003 invasion of Iraq: A cross sectional cluster sample survey," by Burnham et al. (2006).

The Incremental Launching Method for Educational Virtual Model

NASA Astrophysics Data System (ADS)

Martins, Octávio; Sampaio, A. Z.

This paper describes the application of virtual reality technology to the development of an educational model related to the construction of a bridge. The model allow the visualization of the physical progression of the work following a planned construction sequence, the observation of details of the form of every component of the works and carry the study of the type and method of operation of the equipment applied in the construction. The model admit interaction and then some degree of collaboration between students and teachers in the analyses of aspects concerning geometric forms, working methodology or other technical issues observed using the application. The model presents distinct advantage as educational aids in first-degree courses in Civil Engineering.

Construction of Interaction Layer on Socio-Environmental Simulation

NASA Astrophysics Data System (ADS)

Torii, Daisuke; Ishida, Toru

In this study, we propose a method to construct a system based on a legacy socio-environmental simulator which enables to design more realistic interaction models in socio-environmetal simulations. First, to provide a computational model suitable for agent interactions, an interaction layer is constructed and connected from outside of a legacy socio-environmental simulator. Next, to configure the agents interacting ability, connection description for controlling the flow of information in the connection area is provided. As a concrete example, we realized an interaction layer by Q which is a scenario description language and connected it to CORMAS, a socio-envirionmental simulator. Finally, we discuss the capability of our method, using the system, in the Fire-Fighter domain.

Protocol for a mixed-methods study on leader-based interventions in construction contractors' safety commitments.

PubMed

Pedersen, Betina Holbaek; Dyreborg, Johnny; Kines, Pete; Mikkelsen, Kim Lyngby; Hannerz, Harald; Andersen, Dorte Raaby; Spangenberg, Søren

2010-06-01

Owing to high injury rates, safety interventions are needed in the construction industry. Evidence-based interventions tailored to this industry are, however, scarce. Leader-based safety interventions have proven more effective than worker-based interventions in other industries. To test a leader-based safety intervention for construction sites. The intervention consists of encouraging safety coordinators to provide feedback on work safety to the client and line management. The intention is to increase communication and interactions regarding safety within the line management and between the client and the senior management. It is hypothesised that this, in turn, will lead to increased communication and interaction about safety between management and coworkers as well as an increased on-site safety level. A group-randomised double-blinded case study of six Danish construction sites (three intervention sites and three control sites). The recruitment of the construction sites is performed continuously from January 2010 to June 2010. The investigation of each site lasts 20 continuous weeks. Confirmatory statistical analysis is used to test if the safety level increased, and if the probability of safety communications between management and coworkers increases as a consequence of the intervention. The data collection will be blinded. Qualitative methods are used to evaluate if communication and interactions about safety at all managerial levels, including the client, increase. (1) The proportion of safety-related communications out of all studied communications between management and coworkers. (2) The safety level index of the construction sites.

Knowledge of Parents of Children with Autism Spectrum Disorder of Behavior Modification Methods and Their Training Needs Accordingly

ERIC Educational Resources Information Center

Deeb, Raid Mousa Al-Shaik

2016-01-01

The study aimed at identifying knowledge of parents of children with autism spectrum disorder of behavior modification methods and their training needs accordingly. The sample of the study consisted of (98) parents in Jordan. A scale of behavior modification methods was constructed, and then validated. The results of the study showed that the…

GIS-based planning system for managing the flow of construction and demolition waste in Brazil.

PubMed

Paz, Diogo Henrique Fernandes da; Lafayette, Kalinny Patrícia Vaz; Sobral, Maria do Carmo

2018-05-01

The objective of this article was to plan a network for municipal management of construction and demolition waste in Brazil with the assistance of a geographic information system, using the city of Recife as a case study. The methodology was carried out in three stages. The first was to map the illegal construction and demolition of waste disposal points across Recife and classify the waste according to its recyclability. In sequence, a method for indicating suitable areas for installation of voluntary delivery points, for small waste generators, are presented. Finally, a method for indicating suitable areas for the installation of trans-shipment and waste sorting areas, developed for large generators, is presented. The results show that a geographic information system is an essential tool in the planning of municipal construction and demolition waste management, in order to facilitate the spatial analysis and control the generation, sorting, collection, transportation, and final destination of construction and demolition waste, increasing the rate of recovery and recycling of materials.

Effective modern methods of protecting metal road structures from corrosion

NASA Astrophysics Data System (ADS)

Panteleeva, Margarita

2017-10-01

In the article the ways of protection of barrier road constructions from various external influences which cause development of irreversible corrosion processes are considered. The author studied modern methods of action on metal for corrosion protection and chose the most effective of them: a method of directly affecting the metal structures themselves. This method was studied in more detail in the framework of the experiment. As a result, the article describes the experiment of using a three-layer polymer coating, which includes a thermally activated primer, an elastomeric thermoplastic layer with a spatial structure, and a strong outer polyolefin layer. As a result of the experiment, the ratios of the ingredients for obtaining samples of the treated metal having the best parameters of corrosion resistance, elasticity, and strength were revealed. The author constructed a regression equation describing the main properties of the protective polymer coating using the simplex-lattice planning method in the composition-property diagrams.

The Promotion Strategy of Green Construction Materials: A Path Analysis Approach.

PubMed

Huang, Chung-Fah; Chen, Jung-Lu

2015-10-14

As one of the major materials used in construction, cement can be very resource-consuming and polluting to produce and use. Compared with traditional cement processing methods, dry-mix mortar is more environmentally friendly by reducing waste production or carbon emissions. Despite the continuous development and promotion of green construction materials, only a few of them are accepted or widely used in the market. In addition, the majority of existing research on green construction materials focuses more on their physical or chemical characteristics than on their promotion. Without effective promotion, their benefits cannot be fully appreciated and realized. Therefore, this study is conducted to explore the promotion of dry-mix mortars, one of the green materials. This study uses both qualitative and quantitative methods. First, through a case study, the potential of reducing carbon emission is verified. Then a path analysis is conducted to verify the validity and predictability of the samples based on the technology acceptance model (TAM) in this study. According to the findings of this research, to ensure better promotion results and wider application of dry-mix mortar, it is suggested that more systematic efforts be invested in promoting the usefulness and benefits of dry-mix mortar. The model developed in this study can provide helpful references for future research and promotion of other green materials.

Comparison of methods for library construction and short read annotation of shellfish viral metagenomes.

PubMed

Wei, Hong-Ying; Huang, Sheng; Wang, Jiang-Yong; Gao, Fang; Jiang, Jing-Zhe

2018-03-01

The emergence and widespread use of high-throughput sequencing technologies have promoted metagenomic studies on environmental or animal samples. Library construction for metagenome sequencing and annotation of the produced sequence reads are important steps in such studies and influence the quality of metagenomic data. In this study, we collected some marine mollusk samples, such as Crassostrea hongkongensis, Chlamys farreri, and Ruditapes philippinarum, from coastal areas in South China. These samples were divided into two batches to compare two library construction methods for shellfish viral metagenome. Our analysis showed that reverse-transcribing RNA into cDNA and then amplifying it simultaneously with DNA by whole genome amplification (WGA) yielded a larger amount of DNA compared to using only WGA or WTA (whole transcriptome amplification). Moreover, higher quality libraries were obtained by agarose gel extraction rather than with AMPure bead size selection. However, the latter can also provide good results if combined with the adjustment of the filter parameters. This, together with its simplicity, makes it a viable alternative. Finally, we compared three annotation tools (BLAST, DIAMOND, and Taxonomer) and two reference databases (NCBI's NR and Uniprot's Uniref). Considering the limitations of computing resources and data transfer speed, we propose the use of DIAMOND with Uniref for annotating metagenomic short reads as its running speed can guarantee a good annotation rate. This study may serve as a useful reference for selecting methods for Shellfish viral metagenome library construction and read annotation.

Heavy construction equipment noise study using dosimetry and time-motion studies

NASA Astrophysics Data System (ADS)

Spencer, Ellsworth R.; Yantek, David S.

2005-09-01

Noise-induced hearing loss continues to afflict workers in many occupational settings despite longstanding recognition of the problems and well-known methods of prevention and regulations. Sound levels associated with heavy construction equipment range from 80 to 120 dB(A) and power tools commonly used in construction produce sound levels up to 115 dB(A). The focus of the research was to determine the noise exposures of heavy construction equipment operators while documenting the workers' tasks, (i.e., hauling, moving, and/or pushing construction material). Time-motion studies were performed at the construction sites and were used to correlate the noise dosage with the work performed by equipment operators. The cumulative dose for the operator was then plotted with references to work tasks, to identify the tasks that caused the greatest noise exposure. Three construction sites were examined and located in the western Pennsylvania and eastern Ohio areas. The types of construction equipment studied included asphalt pavers, backhoes, bulldozers, compaction equipment, excavators, haul trucks, telehandlers, and wheeled loaders. The results showed that bulldozer operators consistently had the highest noise exposures, ranging from a NIOSH REL (Recommended Exposure Limit) dose of 844% to 25836% and an OSHA PEL (Permissible Exposure Limit) dose of 139% to 1397%.

A novel construction method of QC-LDPC codes based on the subgroup of the finite field multiplicative group for optical transmission systems

NASA Astrophysics Data System (ADS)

Yuan, Jian-guo; Zhou, Guang-xiang; Gao, Wen-chun; Wang, Yong; Lin, Jin-zhao; Pang, Yu

2016-01-01

According to the requirements of the increasing development for optical transmission systems, a novel construction method of quasi-cyclic low-density parity-check (QC-LDPC) codes based on the subgroup of the finite field multiplicative group is proposed. Furthermore, this construction method can effectively avoid the girth-4 phenomena and has the advantages such as simpler construction, easier implementation, lower encoding/decoding complexity, better girth properties and more flexible adjustment for the code length and code rate. The simulation results show that the error correction performance of the QC-LDPC(3 780,3 540) code with the code rate of 93.7% constructed by this proposed method is excellent, its net coding gain is respectively 0.3 dB, 0.55 dB, 1.4 dB and 1.98 dB higher than those of the QC-LDPC(5 334,4 962) code constructed by the method based on the inverse element characteristics in the finite field multiplicative group, the SCG-LDPC(3 969,3 720) code constructed by the systematically constructed Gallager (SCG) random construction method, the LDPC(32 640,30 592) code in ITU-T G.975.1 and the classic RS(255,239) code which is widely used in optical transmission systems in ITU-T G.975 at the bit error rate ( BER) of 10-7. Therefore, the constructed QC-LDPC(3 780,3 540) code is more suitable for optical transmission systems.

A Distance Measure for Genome Phylogenetic Analysis

NASA Astrophysics Data System (ADS)

Cao, Minh Duc; Allison, Lloyd; Dix, Trevor

Phylogenetic analyses of species based on single genes or parts of the genomes are often inconsistent because of factors such as variable rates of evolution and horizontal gene transfer. The availability of more and more sequenced genomes allows phylogeny construction from complete genomes that is less sensitive to such inconsistency. For such long sequences, construction methods like maximum parsimony and maximum likelihood are often not possible due to their intensive computational requirement. Another class of tree construction methods, namely distance-based methods, require a measure of distances between any two genomes. Some measures such as evolutionary edit distance of gene order and gene content are computational expensive or do not perform well when the gene content of the organisms are similar. This study presents an information theoretic measure of genetic distances between genomes based on the biological compression algorithm expert model. We demonstrate that our distance measure can be applied to reconstruct the consensus phylogenetic tree of a number of Plasmodium parasites from their genomes, the statistical bias of which would mislead conventional analysis methods. Our approach is also used to successfully construct a plausible evolutionary tree for the γ-Proteobacteria group whose genomes are known to contain many horizontally transferred genes.

On the Reliability of Individual Brain Activity Networks.

PubMed

Cassidy, Ben; Bowman, F DuBois; Rae, Caroline; Solo, Victor

2018-02-01

There is intense interest in fMRI research on whole-brain functional connectivity, and however, two fundamental issues are still unresolved: the impact of spatiotemporal data resolution (spatial parcellation and temporal sampling) and the impact of the network construction method on the reliability of functional brain networks. In particular, the impact of spatiotemporal data resolution on the resulting connectivity findings has not been sufficiently investigated. In fact, a number of studies have already observed that functional networks often give different conclusions across different parcellation scales. If the interpretations from functional networks are inconsistent across spatiotemporal scales, then the whole validity of the functional network paradigm is called into question. This paper investigates the consistency of resting state network structure when using different temporal sampling or spatial parcellation, or different methods for constructing the networks. To pursue this, we develop a novel network comparison framework based on persistent homology from a topological data analysis. We use the new network comparison tools to characterize the spatial and temporal scales under which consistent functional networks can be constructed. The methods are illustrated on Human Connectome Project data, showing that the DISCOH 2 network construction method outperforms other approaches at most data spatiotemporal resolutions.

Methods and formulas for calculating the strength of plate and shell constructions as used in airplane design

NASA Technical Reports Server (NTRS)

Heck, O S; Ebner, H

1936-01-01

This report is a compilation of previously published articles on formulas and methods of calculation for the determination of the strength and stability of plate and shell construction as employed in airplane design. In particular, it treats the problem of isotropic, orthotopic, and stiffened rectangular plates, thin curved panels, and circular cylinders under various loading conditions. The purpose of appending the pertinent literature references following the subjects discussed was to facilitate a comprehensive study of the treated problems.

Respiratory Cancer and Non-Malignant Respiratory Disease-Related Mortality among Older Construction Workers-Findings from the Health and Retirement Study

PubMed Central

Wang, Xuanwen; Dong, Xiuwen Sue; Welch, Laura; Largay, Julie

2016-01-01

Objective This study explored the risk of respiratory cancer and non-malignant respiratory disease (NMRD)-related mortality among older construction workers. Methods Analyzed data from the 1992–2010 RAND Health and Retirement Study (HRS) and the HRS National Death Index – Cause of Death file. About 25,183 workers aged 50 years and older were examined, including 5,447 decedents and 19,736 survivors, of which 1,460 reported their longest job was in construction. Multinomial logistic regression assessed the differences in mortality between workers’ longest occupations, controlling for confounders. Results After adjusting for smoking and demographics, construction workers were almost twice as likely to die from respiratory cancer (OR = 1.65; CI: 1.10–2.47) or NMRD (OR = 1.73; CI: 1.16–2.58) compared to white-collar workers. Conclusions This study adds to the growing evidence that respiratory cancer and NMRD are frequently associated with construction exposure. PMID:27500180

A probabilistic method for constructing wave time-series at inshore locations using model scenarios

USGS Publications Warehouse

Long, Joseph W.; Plant, Nathaniel G.; Dalyander, P. Soupy; Thompson, David M.

2014-01-01

Continuous time-series of wave characteristics (height, period, and direction) are constructed using a base set of model scenarios and simple probabilistic methods. This approach utilizes an archive of computationally intensive, highly spatially resolved numerical wave model output to develop time-series of historical or future wave conditions without performing additional, continuous numerical simulations. The archive of model output contains wave simulations from a set of model scenarios derived from an offshore wave climatology. Time-series of wave height, period, direction, and associated uncertainties are constructed at locations included in the numerical model domain. The confidence limits are derived using statistical variability of oceanographic parameters contained in the wave model scenarios. The method was applied to a region in the northern Gulf of Mexico and assessed using wave observations at 12 m and 30 m water depths. Prediction skill for significant wave height is 0.58 and 0.67 at the 12 m and 30 m locations, respectively, with similar performance for wave period and direction. The skill of this simplified, probabilistic time-series construction method is comparable to existing large-scale, high-fidelity operational wave models but provides higher spatial resolution output at low computational expense. The constructed time-series can be developed to support a variety of applications including climate studies and other situations where a comprehensive survey of wave impacts on the coastal area is of interest.

Airborne sound transmission loss characteristics of wood-frame construction

NASA Astrophysics Data System (ADS)

Rudder, F. F., Jr.

1985-03-01

This report summarizes the available data on the airborne sound transmission loss properties of wood-frame construction and evaluates the methods for predicting the airborne sound transmission loss. The first part of the report comprises a summary of sound transmission loss data for wood-frame interior walls and floor-ceiling construction. Data bases describing the sound transmission loss characteristics of other building components, such as windows and doors, are discussed. The second part of the report presents the prediction of the sound transmission loss of wood-frame construction. Appropriate calculation methods are described both for single-panel and for double-panel construction with sound absorption material in the cavity. With available methods, single-panel construction and double-panel construction with the panels connected by studs may be adequately characterized. Technical appendices are included that summarize laboratory measurements, compare measurement with theory, describe details of the prediction methods, and present sound transmission loss data for common building materials.

7 CFR 1924.262 - Handling complaints involving dwellings constructed by the self-help method.

Code of Federal Regulations, 2010 CFR

2010-01-01

... by the self-help method. 1924.262 Section 1924.262 Agriculture Regulations of the Department of... constructed by the self-help method. When a borrower whose dwelling was constructed by the self-help method... the guidance of the self-help group. Defects which are determined to be the responsibility of a...

7 CFR 1924.262 - Handling complaints involving dwellings constructed by the self-help method.

Code of Federal Regulations, 2011 CFR

2011-01-01

... by the self-help method. 1924.262 Section 1924.262 Agriculture Regulations of the Department of... constructed by the self-help method. When a borrower whose dwelling was constructed by the self-help method... the guidance of the self-help group. Defects which are determined to be the responsibility of a...

Methodology for determining the investment attractiveness of construction of high-rise buildings

NASA Astrophysics Data System (ADS)

Nezhnikova, Ekaterina; Kashirin, Valentin; Davydova, Yana; Kazakova, Svetlana

2018-03-01

The article presents the analysis of the existing methods for assessing the investment attractiveness of high-rise construction. The authors determined and justified the primary choice of objects and territories that are the most attractive for the development of high-rise construction. A system of risk indicators has been developed that allow making a quantitative adjustment for a particular project in the evaluation of the efficiency of investment projects. The study is aimed at developing basic methodological concepts for a comparative evaluation of the prospects of construction of high-rise facilities that allow to take into consideration the features of investment in construction and to enable quantitative evaluation of the investment effectiveness in high-rise construction.

Evaluating the impact of method bias in health behaviour research: a meta-analytic examination of studies utilising the theories of reasoned action and planned behaviour.

PubMed

McDermott, Máirtín S; Sharma, Rajeev

2017-12-01

The methods employed to measure behaviour in research testing the theories of reasoned action/planned behaviour (TRA/TPB) within the context of health behaviours have the potential to significantly bias findings. One bias yet to be examined in that literature is that due to common method variance (CMV). CMV introduces a variance in scores attributable to the method used to measure a construct, rather than the construct it represents. The primary aim of this study was to evaluate the impact of method bias on the associations of health behaviours with TRA/TPB variables. Data were sourced from four meta-analyses (177 studies). The method used to measure behaviour for each effect size was coded for susceptibility to bias. The moderating impact of method type was assessed using meta-regression. Method type significantly moderated the associations of intentions, attitudes and social norms with behaviour, but not that between perceived behavioural control and behaviour. The magnitude of the moderating effect of method type appeared consistent between cross-sectional and prospective studies, but varied across behaviours. The current findings strongly suggest that method bias significantly inflates associations in TRA/TPB research, and poses a potentially serious validity threat to the cumulative findings reported in that field.

Constructing Robust Cooperative Networks using a Multi-Objective Evolutionary Algorithm

PubMed Central

Wang, Shuai; Liu, Jing

2017-01-01

The design and construction of network structures oriented towards different applications has attracted much attention recently. The existing studies indicated that structural heterogeneity plays different roles in promoting cooperation and robustness. Compared with rewiring a predefined network, it is more flexible and practical to construct new networks that satisfy the desired properties. Therefore, in this paper, we study a method for constructing robust cooperative networks where the only constraint is that the number of nodes and links is predefined. We model this network construction problem as a multi-objective optimization problem and propose a multi-objective evolutionary algorithm, named MOEA-Netrc, to generate the desired networks from arbitrary initializations. The performance of MOEA-Netrc is validated on several synthetic and real-world networks. The results show that MOEA-Netrc can construct balanced candidates and is insensitive to the initializations. MOEA-Netrc can find the Pareto fronts for networks with different levels of cooperation and robustness. In addition, further investigation of the robustness of the constructed networks revealed the impact on other aspects of robustness during the construction process. PMID:28134314

Characterizing Engineering Learners' Preferences for Active and Passive Learning Methods

ERIC Educational Resources Information Center

Magana, Alejandra J.; Vieira, Camilo; Boutin, Mireille

2018-01-01

This paper studies electrical engineering learners' preferences for learning methods with various degrees of activity. Less active learning methods such as homework and peer reviews are investigated, as well as a newly introduced very active (constructive) learning method called "slectures," and some others. The results suggest that…

Quantum phase space with a basis of Wannier functions

NASA Astrophysics Data System (ADS)

Fang, Yuan; Wu, Fan; Wu, Biao

2018-02-01

A quantum phase space with Wannier basis is constructed: (i) classical phase space is divided into Planck cells; (ii) a complete set of Wannier functions are constructed with the combination of Kohn’s method and Löwdin method such that each Wannier function is localized at a Planck cell. With these Wannier functions one can map a wave function unitarily onto phase space. Various examples are used to illustrate our method and compare it to Wigner function. The advantage of our method is that it can smooth out the oscillations in wave functions without losing any information and is potentially a better tool in studying quantum-classical correspondence. In addition, we point out that our method can be used for time-frequency analysis of signals.

Neonatal Atlas Construction Using Sparse Representation

PubMed Central

Shi, Feng; Wang, Li; Wu, Guorong; Li, Gang; Gilmore, John H.; Lin, Weili; Shen, Dinggang

2014-01-01

Atlas construction generally includes first an image registration step to normalize all images into a common space and then an atlas building step to fuse the information from all the aligned images. Although numerous atlas construction studies have been performed to improve the accuracy of the image registration step, unweighted or simply weighted average is often used in the atlas building step. In this article, we propose a novel patch-based sparse representation method for atlas construction after all images have been registered into the common space. By taking advantage of local sparse representation, more anatomical details can be recovered in the built atlas. To make the anatomical structures spatially smooth in the atlas, the anatomical feature constraints on group structure of representations and also the overlapping of neighboring patches are imposed to ensure the anatomical consistency between neighboring patches. The proposed method has been applied to 73 neonatal MR images with poor spatial resolution and low tissue contrast, for constructing a neonatal brain atlas with sharp anatomical details. Experimental results demonstrate that the proposed method can significantly enhance the quality of the constructed atlas by discovering more anatomical details especially in the highly convoluted cortical regions. The resulting atlas demonstrates superior performance of our atlas when applied to spatially normalizing three different neonatal datasets, compared with other start-of-the-art neonatal brain atlases. PMID:24638883

Biomarker combinations for diagnosis and prognosis in multicenter studies: Principles and methods.

PubMed

Meisner, Allison; Parikh, Chirag R; Kerr, Kathleen F

2017-01-01

Many investigators are interested in combining biomarkers to predict a binary outcome or detect underlying disease. This endeavor is complicated by the fact that many biomarker studies involve data from multiple centers. Depending upon the relationship between center, the biomarkers, and the target of prediction, care must be taken when constructing and evaluating combinations of biomarkers. We introduce a taxonomy to describe the role of center and consider how a biomarker combination should be constructed and evaluated. We show that ignoring center, which is frequently done by clinical researchers, is often not appropriate. The limited statistical literature proposes using random intercept logistic regression models, an approach that we demonstrate is generally inadequate and may be misleading. We instead propose using fixed intercept logistic regression, which appropriately accounts for center without relying on untenable assumptions. After constructing the biomarker combination, we recommend using performance measures that account for the multicenter nature of the data, namely the center-adjusted area under the receiver operating characteristic curve. We apply these methods to data from a multicenter study of acute kidney injury after cardiac surgery. Appropriately accounting for center, both in construction and evaluation, may increase the likelihood of identifying clinically useful biomarker combinations.

A Geostatistical Toolset for Reconstructing Louisiana's Coastal Stratigraphy using Subsurface Boring and Cone Penetrometer Test Data

NASA Astrophysics Data System (ADS)

Li, A.; Tsai, F. T. C.; Jafari, N.; Chen, Q. J.; Bentley, S. J.

2017-12-01

A vast area of river deltaic wetlands stretches across southern Louisiana coast. The wetlands are suffering from a high rate of land loss, which increasingly threats coastal community and energy infrastructure. A regional stratigraphic framework of the delta plain is now imperative to answer scientific questions (such as how the delta plain grows and decays?) and to provide information to coastal protection and restoration projects (such as marsh creation and construction of levees and floodwalls). Through years, subsurface investigations in Louisiana have been conducted by state and federal agencies (Louisiana Department of Natural Resources, United States Geological Survey, United States Army Corps of Engineers, etc.), research institutes (Louisiana Geological Survey, LSU Coastal Studies Institute, etc.), engineering firms, and oil-gas companies. This has resulted in the availability of various types of data, including geological, geotechnical, and geophysical data. However, it is challenging to integrate different types of data and construct three-dimensional stratigraphy models in regional scale. In this study, a set of geostatistical methods were used to tackle this problem. An ordinary kriging method was used to regionalize continuous data, such as grain size, water content, liquid limit, plasticity index, and cone penetrometer tests (CPTs). Indicator kriging and multiple indicator kriging methods were used to regionalize categorized data, such as soil classification. A compositional kriging method was used to regionalize compositional data, such as soil composition (fractions of sand, silt and clay). Stratigraphy models were constructed for three cases in the coastal zone: (1) Inner Harbor Navigation Canal (IHNC) area: soil classification and soil behavior type (SBT) stratigraphies were constructed using ordinary kriging; (2) Middle Barataria Bay area: a soil classification stratigraphy was constructed using multiple indicator kriging; (3) Lower Barataria Bay and Lower Breton Sound areas: a soil texture stratigraphy was constructed using soil compositional data and compositional kriging. Cross sections were extracted from the three-dimensional stratigraphy models to reveal spatial distributions of different stratigraphic features.

Formation of production structural units within a construction company using the systemic integrated method when implementing high-rise development projects

NASA Astrophysics Data System (ADS)

Lapidus, Azary; Abramov, Ivan

2018-03-01

Development of efficient algorithms for designing future operations is a vital element in construction business. This paper studies various aspects of a methodology required to determine the integration index for construction crews performing various process-related jobs. The main objective of the study outlined in this paper is to define the notion of integration in respect to a construction crew that performs complete cycles of construction and assembly works in order to find the optimal organizational solutions, using the integrated crew algorithm built specifically for that purpose. As seen in the sequence of algorithm elements, it was designed to focus on the key factors affecting the level of integration of a construction crew depending on the value of each of those elements. The multifactor modelling approach is used to assess the KPI of integrated construction crews involved in large-sale high-rise construction projects. The purpose of this study is to develop a theoretical recommendation and a scientific methodological provision of organizational and technological nature to ensure qualitative formation of integrated construction crews to increase their productivity during integrated implementation of multi-task construction phases. The key difference of the proposed solution from the already existing ones is that it requires identification of the degree of impact of each factor, including the change in the qualification level, on the integration index of each separate element in the organizational and technological system in construction (integrated construction crew).

18 CFR 4.96 - Amendment of exemption.

Code of Federal Regulations, 2010 CFR

2010-04-01

... design, location, method of construction or operation of its project, it must first notify the..., location, method of construction or operation of the project, the exemption holder may implement the..., method of construction or the operation of the project works, the exemption holder may not implement the...

Research on Swivel Construction Technology of 22,400 Tons in Zoucheng Thirty Meter Bridge

NASA Astrophysics Data System (ADS)

Han, Jun; Benlin, Xiao

2018-05-01

In recent years, with the rapid development of highways and railways in our country, there have been many new bridges that need to cross the existing routes. If the conventional construction methods are used, the existing traffic will be affected and the traffic will be built above the busy traffic lines, so there is a big security risk, the construction methods must be improved and innovated. In this paper, it intends to research and develop some key technologies of swivel construction. According to the construction features to use finite element method of swivel cable-stayed bridge to analyse the cable-stayed bridge . The swivel construction process is carried out to solve the technical problems and difficulties in the construction.

Computer-aided design of nano-filter construction using DNA self-assembly

NASA Astrophysics Data System (ADS)

Mohammadzadegan, Reza; Mohabatkar, Hassan

2007-01-01

Computer-aided design plays a fundamental role in both top-down and bottom-up nano-system fabrication. This paper presents a bottom-up nano-filter patterning process based on DNA self-assembly. In this study we designed a new method to construct fully designed nano-filters with the pores between 5 nm and 9 nm in diameter. Our calculations illustrated that by constructing such a nano-filter we would be able to separate many molecules.

On the delay factors of the private construction projects in Medan city

NASA Astrophysics Data System (ADS)

Perwira Mulia Tarigan, A.; Subroto

2018-03-01

The delay in construction projects undertaken by contractors is impeding the economic growth of a region. Medan city which is one of the big cities in Indonesia is suffering from it. This study aims to identify the dominant factors causing delays in construction projects conducted by private contractors. The interview method with questionnaires is used to involve 20 contractors, 10 consultants, and 10 owner representatives in the study. From the 45 identified factors causing delays, the highest ranking is the change of work demand by the project owners with 71.84% importance index.

Injuries and their burden in insured construction workers in Iran, 2012.

PubMed

Hatami, Seyed Esmaeil; Khanjani, Narges; Alavinia, Seyed Mohammad; Ravandi, Mohammad Reza Ghotbi

2017-03-01

The present study used disability adjusted life years (DALY) to estimate the burden of external cause of injuries in construction workers insured in Iran in 2012. The Global Burden of Disease method (2010) was used to estimate the years of life lost due to death (YLL) and years of life lost due to disability (YLD). DALY was calculated as the sum of YLL and YLD. There were 5352 injured construction workers in Iran (11.25 individuals per 1000). Falling was the most common incidence and included 2490 individuals (46.53%). Totally, DALY was estimated 18,557 years for all age groups and both genders including 17,821 YLD (96%) and 736 YLL (4%). The DALY related to construction work is high in Iran and it has notably affected the young. Hence more preventive methods should be applied to reduce the overall burden of specific external cause of injuries especially in young and inexperienced workers.

Dendrometer bands made easy: using modified cable ties to measure incremental growth of trees

USGS Publications Warehouse

Anemaet, Evelyn R.; Middleton, Beth A.

2013-01-01

Dendrometer bands are a useful way to make sequential repeated measurements of tree growth, but traditional dendrometer bands can be expensive, time consuming, and difficult to construct in the field. An alternative to the traditional method of band construction is to adapt commercially available materials. This paper describes how to construct and install dendrometer bands using smooth-edged, stainless steel, cable tie banding and attachable rollerball heads. As a performance comparison, both traditional and cable tie dendrometer bands were installed on baldcypress trees at the National Wetlands Research Center in Lafayette, Louisiana, by both an experienced and a novice worker. Band installation times were recorded, and growth of the trees as estimated by the two band types was measured after approximately one year, demonstrating equivalence of the two methods. This efficient approach to dendrometer band construction can help advance the knowledge of long-term tree growth in ecological studies.

The Use of Sociocultural Constructs in Cancer Screening Research Among African Americans

PubMed Central

Deshpande, Anjali D.; Sanders Thompson, Vetta L.; Vaughn, Kimberlee P.; Kreuter, Matthew W.

2013-01-01

Background Studies are increasingly examining the role of sociocultural values, beliefs, and attitudes in cancer prevention. However, these studies vary widely in how sociocultural constructs are defined and measured, how they are conceived as affecting cancer beliefs, behaviors, and screening, and how they are applied in interventions. Methods To characterize the current state of this research literature, we conducted a critical review of studies published between 1990 and 2006 to describe the current use of sociocultural constructs in cancer screening research among African Americans. We included quantitative and qualitative studies with cancer as a primary focus that included African American participants, assessed screening behaviors, reported race-specific analyses, and considered one or more sociocultural factors. Studies were evaluated for type of cancer and screening analyzed, study population, methodology, sociocultural constructs considered, definitions of constructs, provision of psychometric data for measures, and journal characteristics. Results Of 94 studies identified for review, 35 met the inclusion criteria and were evaluated. Most focused on breast cancer screening, and thus African American women. Sociocultural constructs were seldom clearly defined, and the sources and psychometric properties of sociocultural measures were rarely reported. Conclusions A multidisciplinary approach to developing a common language and a standardized set of measures for sociocultural constructs will advance research in this area. Specific recommendations are made for future research. PMID:19556966

Regulatory Implications of Using Constructed Wetlands to Treat Selenium-Laden Wastewater

Treesearch

A. Dennis Lemly; Harry M. Ohlendorf

2002-01-01

The practice of using constructed wetlands to treat selenium-laden wastewater is gaining popularity in the linited States and elsewhere. However, proponents of treatment wetlands often overlook important ecological liabilities and regulatory implications when developing new methods and applications. Their research studies typically seek to answer a basic performance...

Graduate Students' Construction of Researcher Identities Explored through Discourse Analysis

ERIC Educational Resources Information Center

Davis, C. Amelia; Lester, Jessica N.

2016-01-01

While many research methods courses challenge students to make sense of their own researcher identities as they relate to research paradigms and perspectives, there is a lack of research that examines how students actually go about constructing these identities, particularly at the level of discourse. In this study, we attended to graduate…

The Problem of Constructive Misalignment in International Business Education: A Three-Stage Integrated Approach to Enhancing Teaching and Learning

ERIC Educational Resources Information Center

Zhao, Shasha

2016-01-01

Past evidence suggests that constructive misalignment is particularly problematic in International Business (IB) education, though this paradigm has received limited research attention. Building on the literature of three independent teaching methods (threshold concept, problem-based learning, and technology-based learning), this study contributes…

Cost, production and effectiveness of masticated fireline.

Treesearch

Elizabeth Dodson; Dana Mitchell

2016-01-01

Fire managers are continuously looking for improved methods to construct fireline with minimal resource damage. One option for fireline construction that has so far received limited attention is the use of mastication equipment. This study evaluated a masticating disk mounted on a self-leveling feller- buncher for the cost, speed, and adherence to fireline...

Advanced Entry Adult Apprenticeship Training Scheme: A Case Study

ERIC Educational Resources Information Center

Sparks, Alan; Ingram, Hadyn; Phillips, Sunny

2009-01-01

Purpose: The purpose of this paper is to evaluate an innovative way to train adult apprentices for the construction industry. Design/methodology/approach: The paper emphasizes that, in order to address skills shortages for international construction, training methods must be improved. It looks at the example of an adult apprenticeship scheme in…

Co-Constructing Family Identities through Young Children's Telephone-Mediated Narrative Exchanges

ERIC Educational Resources Information Center

Cameron, Catherine Ann; Gillen, Julia

2013-01-01

This article explores telephone interactions between young children and adult family members as contributing insights to the co-construction of identities within both the nuclear and the extended family. The authors deploy methods of linguistic ethnography to enrich the scope of interpreting the data beyond textual analysis. The study's premise…

Constructing a Covariance Matrix that Yields a Specified Minimizer and a Specified Minimum Discrepancy Function Value.

ERIC Educational Resources Information Center

Cudeck, Robert; Browne, Michael W.

1992-01-01

A method is proposed for constructing a population covariance matrix as the sum of a particular model plus a nonstochastic residual matrix, with the stipulation that the model holds with a prespecified lack of fit. The procedure is considered promising for Monte Carlo studies. (SLD)

Promoting Creativity in International Business Education: A Protocol for Student-Constructed Cases

ERIC Educational Resources Information Center

Riordan, Diane A.; Sullivan, M. Cathy; Fink, Danny

2003-01-01

Case studies, including "archival cases," "documentary cases," "living cases," and "learner-generated cases," are popular teaching methods in the international business curriculum. In this paper we present a protocol for student-constructed cases, an extension of the learner-generated case, and provide an example using foreign currency exchange…

Positive Deviance during Organization Change: Researchers' Social Construction of Expanded University Goals

ERIC Educational Resources Information Center

Sutherland, Claire Euline

2013-01-01

Many universities have expanded from teaching only to include research goals, requiring shifts in organization behavior. An exploratory case study method was used to examine these dynamics among positive deviant researchers at the University of Technology, Jamaica (UTech), the single case examined, from a social construction perspective. As a…

Scheduling of House Development Projects with CPM and PERT Method for Time Efficiency (Case Study: House Type 36)

NASA Astrophysics Data System (ADS)

Kholil, Muhammad; Nurul Alfa, Bonitasari; Hariadi, Madjumsyah

2018-04-01

Network planning is one of the management techniques used to plan and control the implementation of a project, which shows the relationship between activities. The objective of this research is to arrange network planning on house construction project on CV. XYZ and to know the role of network planning in increasing the efficiency of time so that can be obtained the optimal project completion period. This research uses descriptive method, where the data collected by direct observation to the company, interview, and literature study. The result of this research is optimal time planning in project work. Based on the results of the research, it can be concluded that the use of the both methods in scheduling of house construction project gives very significant effect on the completion time of the project. The company’s CPM (Critical Path Method) method can complete the project with 131 days, PERT (Program Evaluation Review and Technique) Method takes 136 days. Based on PERT calculation obtained Z = -0.66 or 0,2546 (from normal distribution table), and also obtained the value of probability or probability is 74,54%. This means that the possibility of house construction project activities can be completed on time is high enough. While without using both methods the project completion time takes 173 days. So using the CPM method, the company can save time up to 42 days and has time efficiency by using network planning.

Construction of high frame rate images with Fourier transform

NASA Astrophysics Data System (ADS)

Peng, Hu; Lu, Jian-Yu

2002-05-01

Traditionally, images are constructed with a delay-and-sum method that adjusts the phases of received signals (echoes) scattered from the same point in space so that they are summed in phase. Recently, the relationship between the delay-and-sum method and the Fourier transform is investigated [Jian-yu Lu, Anjun Liu, and Hu Peng, ``High frame rate and delay-and-sum imaging methods,'' IEEE Trans. Ultrason. Ferroelectr. Freq. Control (submitted)]. In this study, a generic Fourier transform method is developed. Two-dimensional (2-D) or three-dimensional (3-D) high frame rate images can be constructed using the Fourier transform with a single transmission of an ultrasound pulse from an array as long as the transmission field of the array is known. To verify our theory, computer simulations have been performed with a linear array, a 2-D array, a convex curved array, and a spherical 2-D array. The simulation results are consistent with our theory. [Work supported in part by Grant 5RO1 HL60301 from NIH.

Research on the Construction of Remote Sensing Automatic Interpretation Symbol Big Data

NASA Astrophysics Data System (ADS)

Gao, Y.; Liu, R.; Liu, J.; Cheng, T.

2018-04-01

Remote sensing automatic interpretation symbol (RSAIS) is an inexpensive and fast method in providing precise in-situ information for image interpretation and accuracy. This study designed a scientific and precise RSAIS data characterization method, as well as a distributed and cloud architecture massive data storage method. Additionally, it introduced an offline and online data update mode and a dynamic data evaluation mechanism, with the aim to create an efficient approach for RSAIS big data construction. Finally, a national RSAIS database with more than 3 million samples covering 86 land types was constructed during 2013-2015 based on the National Geographic Conditions Monitoring Project of China and then annually updated since the 2016 period. The RSAIS big data has proven to be a good method for large scale image interpretation and field validation. It is also notable that it has the potential to solve image automatic interpretation with the assistance of deep learning technology in the remote sensing big data era.

Technology Utilization House Study Report. [For Energy Conservation

NASA Technical Reports Server (NTRS)

1974-01-01

The objectives of Project TECH are: (1) to construct a single family detached dwelling for demonstrating the application of advanced technology and minimizing the requirement for energy and utility services, and (2) to help influence future development in home construction by defining the interaction of integrated energy and water management systems with building configuration and construction materials. Components and methods expected to be cost effective over a 20 year span were studied. Emphasis was placed on the utilization of natural heating and cooling characteristics. Orientation and location of windows, landscaping, natural ventilation, and characteristics of the local climate and microclimate were intended to be used to best advantage. Energy conserving homes are most efficient when design for specific sites, therefore project TECH should not be considered a prototype design suitable for all locations. However, it does provide ideas and analytical methods which can be applied to some degree in all housing.

On asymptotic behavior and energy distribution for some one-dimensional non-parabolic diffusion problems

NASA Astrophysics Data System (ADS)

Kim, Seonghak; Yan, Baisheng

2018-06-01

We study some non-parabolic diffusion problems in one space dimension, where the diffusion flux exhibits forward and backward nature of the Perona–Malik, Höllig or non-Fourier type. Classical weak solutions to such problems are constructed in a way to capture some expected and unexpected properties, including anomalous asymptotic behaviors and energy dissipation or allocation. Specific properties of solutions will depend on the type of the diffusion flux, but the primary method of our study relies on reformulating diffusion equations involved as an inhomogeneous partial differential inclusion and on constructing solutions from the differential inclusion by a combination of the convex integration and Baire’s category methods. In doing so, we introduce the appropriate notion of subsolutions of the partial differential inclusion and their transition gauge, which plays a pivotal role in dealing with some specific features of the constructed weak solutions.

Research and implementation on 3D modeling of geological body

NASA Astrophysics Data System (ADS)

Niu, Lijuan; Li, Ligong; Zhu, Renyi; Huang, Man

2017-10-01

This study based on GIS thinking explores the combination of the mixed spatial data model and GIS model to build three-dimensional(3d) model of geological bodies in the Arc Engine platform, describes the interface and method used in the construction of 3d geological body in Arc Engine component platform in detail, and puts forward an indirect method which constructs a set of geological grid layers through Rigging interpolation by the borehole data and then converts it into the geological layers of TIN, which improves the defect in building the geological layers of TIN directly and makes it better to complete the simulation of the real geological layer. This study makes a useful attempt to build 3d model of the geological body based on the GIS, and provides a certain reference value for simulating geological bodies in 3d and constructing the digital system of underground space.

Tangential Bicortical Locked Fixation Improves Stability in Vancouver B1 Periprosthetic Femur Fractures: A Biomechanical Study

PubMed Central

Lewis, Gregory S.; Caroom, Cyrus T.; Wee, Hwabok; Jurgensmeier, Darin; Rothermel, Shane D.; Bramer, Michelle A.; Reid, J. Spence

2015-01-01

Objectives The biomechanical difficulty in fixation of a Vancouver B1 periprosthetic fracture is purchase of the proximal femoral segment in the presence of the hip stem. Several newer technologies provide the ability to place bicortical locking screws tangential to the hip stem with much longer lengths of screw purchase compared to unicortical screws. This biomechanical study compares the stability of two of these newer constructs to previous methods. Methods Thirty composite synthetic femurs were prepared with cemented hip stems. The distal femur segment was osteotomized, and plates were fixed proximally with either: (1) cerclage cables; (2) locked unicortical screws; (3) a composite of locked screws and cables; or tangentially directed bicortical locking screws using either (4) a stainless steel LCP system with a Locking Attachment Plate (Synthes), or (5) a titanium alloy NCB system (Zimmer). Specimens were tested to failure in either axial or torsional quasi-static loading modes (n = 3) after 20 moderate load pre-conditioning cycles. Stiffness, maximum force, and failure mechanism were determined. Results Bicortical constructs resisted higher (by an average of at least 27%) maximum forces than the other three constructs in torsional loading (p<0.05). Cables constructs exhibited lower maximum force than all other constructs, in both axial and torsional loading. The bicortical titanium construct was stiffer than the bicortical stainless steel construct in axial loading. Conclusions Proximal fixation stability is likely improved with the use of bicortical locking screws as compared to traditional unicortical screws and cable techniques. In this study with a limited sample size, we found the addition of cerclage cables to unicortical screws may not offer much improvement in biomechanical stability of unstable B1 fractures. PMID:26053467

Perceived heat stress and health effects on construction workers

PubMed Central

Dutta, Priya; Rajiva, Ajit; Andhare, Dileep; Azhar, Gulrez Shah; Tiwari, Abhiyant; Sheffield, Perry

2015-01-01

Introduction: Increasing heat waves-particularly in urban areas where construction is most prevalent, highlight a need for heat exposure assessment of construction workers. This study aims to characterize the effects of heat on construction workers from a site in Gandhinagar. Materials and Methods: This study involved a mixed methods approach consisting of a cross sectional survey with anthropometric measurements (n = 219) and four focus groups with construction workers, as well as environmental measurements of heat stress exposure at a construction site. Survey data was collected in two seasons i.e., summer and winter months, and heat illness and symptoms were compared between the two time periods. Thematic coding of focus group data was used to identify vulnerability factors and coping mechanisms of the workers. Heat stress, recorded using a wet bulb globe temperature monitor, was compared to international safety standards. Results: The survey findings suggest that heat-related symptoms increased in summer; 59% of all reports in summer were positive for symptoms (from Mild to Severe) as compared to 41% in winter. Focus groups revealed four dominant themes: (1) Non-occupational stressors compound work stressors; (2) workers were particularly attuned to the impact of heat on their health; (3) workers were aware of heat-related preventive measures; and (4) few resources were currently available to protect workers from heat stress. Working conditions often exceed international heat stress safety thresholds. Female workers and new employees might be at increased risk of illness or injury. Conclusion: This study suggests significant health impacts on construction workers from heat stress exposure in the workplace, showed that heat stress levels were higher than those prescribed by international standards and highlights the need for revision of work practices, increased protective measures, and possible development of indigenous work safety standards for heat exposure. PMID:26957814

Study on Big Database Construction and its Application of Sample Data Collected in CHINA'S First National Geographic Conditions Census Based on Remote Sensing Images

NASA Astrophysics Data System (ADS)

Cheng, T.; Zhou, X.; Jia, Y.; Yang, G.; Bai, J.

2018-04-01

In the project of China's First National Geographic Conditions Census, millions of sample data have been collected all over the country for interpreting land cover based on remote sensing images, the quantity of data files reaches more than 12,000,000 and has grown in the following project of National Geographic Conditions Monitoring. By now, using database such as Oracle for storing the big data is the most effective method. However, applicable method is more significant for sample data's management and application. This paper studies a database construction method which is based on relational database with distributed file system. The vector data and file data are saved in different physical location. The key issues and solution method are discussed. Based on this, it studies the application method of sample data and analyzes some kinds of using cases, which could lay the foundation for sample data's application. Particularly, sample data locating in Shaanxi province are selected for verifying the method. At the same time, it takes 10 first-level classes which defined in the land cover classification system for example, and analyzes the spatial distribution and density characteristics of all kinds of sample data. The results verify that the method of database construction which is based on relational database with distributed file system is very useful and applicative for sample data's searching, analyzing and promoted application. Furthermore, sample data collected in the project of China's First National Geographic Conditions Census could be useful in the earth observation and land cover's quality assessment.

48 CFR 52.222-32 - Construction Wage Rate Requirements-Price Adjustment (Actual Method).

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 2 2014-10-01 2014-10-01 false Construction Wage Rate... CLAUSES Text of Provisions and Clauses 52.222-32 Construction Wage Rate Requirements—Price Adjustment (Actual Method). As prescribed in 22.407(g), insert the following clause: Construction Wage Rate...

Development of innovative activity of the enterprises of construction branch in the direction of increase in resource-saving and energy efficiency

NASA Astrophysics Data System (ADS)

Papelniuk, Oksana

2017-10-01

The author studies innovative activity of enterprises and carries out the classification of conditions and factors of construction enterprises’ innovative activity, and conducts systematization of specific features of this innovative activity. On the basis of statistical data on structure and dynamics of innovations the author carries out the research with the use of methods of economic-mathematical modelling in order to offer the approach which will allow construction enterprises to define the directions of innovative activity for achievement of a resource-saving and energy efficiency in construction sector.

A Body of Work Standard-Setting Method with Construct Maps

ERIC Educational Resources Information Center

Wyse, Adam E.; Bunch, Michael B.; Deville, Craig; Viger, Steven G.

2014-01-01

This article describes a novel variation of the Body of Work method that uses construct maps to overcome problems of transparency, rater inconsistency, and scores gaps commonly occurring with the Body of Work method. The Body of Work method with construct maps was implemented to set cut-scores for two separate K-12 assessment programs in a large…

18 CFR 4.104 - Amendment of exemption.

Code of Federal Regulations, 2010 CFR

2010-04-01

... change the design, location, method of construction or operation of its project, it must first notify the..., location, method of construction or operation of the project, the exemption holder may implement the..., method of construction or the operation of the project works, the exemption holder may not implement the...

Construction method of pre assembled unit of bolt sphere grid

NASA Astrophysics Data System (ADS)

Hu, L. W.; Guo, F. L.; Wang, J. L.; Bu, F. M.

2018-03-01

The traditional construction of bolt sphere grid has many disadvantages, such as high cost, large amount of work at high altitude and long construction period, in order to make up for these shortcomings, in this paper, a new and applicable construction method is explored: setting up local scaffolding, installing the bolt sphere grid starting frame on the local scaffolding, then the pre assembled unit of bolt sphere grid is assembled on the ground, using small hoisting equipment to lift pre assembled unit to high altitude and install. Compared with the traditional installation method, the construction method has strong practicability and high economic efficiency, and has achieved good social and economic benefits.

A comparative study of integrators for constructing ephemerides with high precision.

NASA Astrophysics Data System (ADS)

Huang, Tian-Yi

1990-09-01

There are four indexes for evaluating various integrators. They are the local truncation error, the numerical stability, the complexity of computation and the quality of adaptation. A review and a comparative study of several numerical integration methods, such as Adams, Cowell, Runge-Kutta-Fehlberg, Gragg-Bulirsch-Stoer extrapolation, Everhart, Taylor series and Krogh, which are popular for constructing ephemerides with high precision, has been worked out.

Construct Validation of a Program to Increase Use of Self-Regulation for Physical Activity among Overweight and Obese Adults with Type 2 Diabetes Mellitus

ERIC Educational Resources Information Center

Petosa, R. Lingyak; Silfee, Valerie

2016-01-01

Background: Studies have revealed that overweight adults with type 2 diabetes have low rates of physical activity and are resistant to change. Purpose: The purpose of this study was to use construct validation of intervention methods to examine the impact of a 4-week behavioral intervention on the use of self-regulation skills for physical…

Permanent Ground Anchors : Nicholson Design Criteria

DOT National Transportation Integrated Search

1982-09-01

This study discusses the methods used by Nicholson Construction Company in the design of permanent ground anchors specifically as related to retaining walls. Basic soil parameters, design concepts, drilling and grouting methods for ground anchors are...

DEVELOPMENT OF A PHYSICAL PERFORMANCE ASSESSMENT CHECKLIST FOR ATHLETES WHO SUSTAINED A LOWER EXTREMITY INJURY IN PREPARATION FOR RETURN TO SPORT: A DELPHI STUDY

PubMed Central

Haines, Sara; Baker, Tricia

2013-01-01

Purpose/Background: To develop a consensus on the critical constructs necessary to be included in a physical performance assessment checklist (PPAC) to assess an athlete's ability for return to sport following a lower extremity injury. Methods: The study used a 3‐round Delphi method to finalize the PPAI originally developed by a panel of experts. Fourteen Delphi representative sample participants were randomly derived from the authors of peer‐reviewed publications of lower extremity injuries. Nine participants completed all 3 rounds. Results: Throughout the 3 rounds, the 10 initial constructs were modified and revised to produce the finalized PPAC consisting of 12 constructs necessary to consider for an athlete's return to sport after a lower extremity injury. Conclusions: This instrument can be used as a checklist to advocate for prospective batteries of physical performance tests to incorporate the elements identified by this study. Level of Evidence: 5 PMID:23439809

Constructing financial network based on PMFG and threshold method

NASA Astrophysics Data System (ADS)

Nie, Chun-Xiao; Song, Fu-Tie

2018-04-01

Based on planar maximally filtered graph (PMFG) and threshold method, we introduced a correlation-based network named PMFG-based threshold network (PTN). We studied the community structure of PTN and applied ISOMAP algorithm to represent PTN in low-dimensional Euclidean space. The results show that the community corresponds well to the cluster in the Euclidean space. Further, we studied the dynamics of the community structure and constructed the normalized mutual information (NMI) matrix. Based on the real data in the market, we found that the volatility of the market can lead to dramatic changes in the community structure, and the structure is more stable during the financial crisis.

Construction of prediction intervals for Palmer Drought Severity Index using bootstrap

NASA Astrophysics Data System (ADS)

Beyaztas, Ufuk; Bickici Arikan, Bugrayhan; Beyaztas, Beste Hamiye; Kahya, Ercan

2018-04-01

In this study, we propose an approach based on the residual-based bootstrap method to obtain valid prediction intervals using monthly, short-term (three-months) and mid-term (six-months) drought observations. The effects of North Atlantic and Arctic Oscillation indexes on the constructed prediction intervals are also examined. Performance of the proposed approach is evaluated for the Palmer Drought Severity Index (PDSI) obtained from Konya closed basin located in Central Anatolia, Turkey. The finite sample properties of the proposed method are further illustrated by an extensive simulation study. Our results revealed that the proposed approach is capable of producing valid prediction intervals for future PDSI values.

The construction of partner potential from the general potential anharmonic in D-dimensional Schrodinger system

NASA Astrophysics Data System (ADS)

Suparmi; Cari, C.; Wea, K. N.; Wahyulianti

2018-03-01

The Schrodinger equation is the fundamental equation in quantum physics. The characteristic of the particle in physics potential field can be explained by using the Schrodinger equation. In this study, the solution of 4 dimensional Schrodinger equation for the anharmonic potential and the anharmonic partner potential have done. The method that used to solve the Schrodinger equation was the ansatz wave method, while to construction the partner potential was the supersymmetric method. The construction of partner potential used to explain the experiment result that cannot be explained by the original potential. The eigenvalue for anharmonic potential and the anharmonic partner potential have the same characteristic. Every increase of quantum orbital number the eigenvalue getting smaller. This result corresponds to Bohrn’s atomic theory that the eigenvalue is inversely proportional to the atomic shell. But the eigenvalue for the anharmonic partner potential higher than the eigenvalue for the anharmonic original potential.

Sherlock Holmes as a Social Scientist.

ERIC Educational Resources Information Center

Ward, Veronica; Orbell, John

1988-01-01

Presents a way of teaching the scientific method through studying the adventures of Sherlock Holmes. Asserting that Sherlock Holmes used the scientific method to solve cases, the authors construct Holmes' method through excerpts from novels featuring his adventures. Discusses basic assumptions, paradigms, theory building, and testing. (SLM)

Principles and Applications of Ultrasonic-Based Nondestructive Methods for Self-Healing in Cementitious Materials

PubMed Central

Ahn, Eunjong; Kim, Hyunjun; Sim, Sung-Han; Shin, Sung Woo; Shin, Myoungsu

2017-01-01

Recently, self-healing technologies have emerged as a promising approach to extend the service life of social infrastructure in the field of concrete construction. However, current evaluations of the self-healing technologies developed for cementitious materials are mostly limited to lab-scale experiments to inspect changes in surface crack width (by optical microscopy) and permeability. Furthermore, there is a universal lack of unified test methods to assess the effectiveness of self-healing technologies. Particularly, with respect to the self-healing of concrete applied in actual construction, nondestructive test methods are required to avoid interrupting the use of the structures under evaluation. This paper presents a review of all existing research on the principles of ultrasonic test methods and case studies pertaining to self-healing concrete. The main objective of the study is to examine the applicability and limitation of various ultrasonic test methods in assessing the self-healing performance. Finally, future directions on the development of reliable assessment methods for self-healing cementitious materials are suggested. PMID:28772640

A Method of DTM Construction Based on Quadrangular Irregular Networks and Related Error Analysis

PubMed Central

Kang, Mengjun

2015-01-01

A new method of DTM construction based on quadrangular irregular networks (QINs) that considers all the original data points and has a topological matrix is presented. A numerical test and a real-world example are used to comparatively analyse the accuracy of QINs against classical interpolation methods and other DTM representation methods, including SPLINE, KRIGING and triangulated irregular networks (TINs). The numerical test finds that the QIN method is the second-most accurate of the four methods. In the real-world example, DTMs are constructed using QINs and the three classical interpolation methods. The results indicate that the QIN method is the most accurate method tested. The difference in accuracy rank seems to be caused by the locations of the data points sampled. Although the QIN method has drawbacks, it is an alternative method for DTM construction. PMID:25996691

Exploring the construct validity of the social cognition and object relations scale in a clinical sample.

PubMed

Stein, Michelle B; Slavin-Mulford, Jenelle; Sinclair, S Justin; Siefert, Caleb J; Blais, Mark A

2012-01-01

The Social Cognition and Object Relations Scale-Global rating method (SCORS-G; Stein, Hilsenroth, Slavin-Mulford, & Pinsker, 2011; Westen, 1995) measures the quality of object relations in narrative material. This study employed a multimethod approach to explore the structure and construct validity of the SCORS-G. The Thematic Apperception Test (TAT; Murray, 1943) was administered to 59 patients referred for psychological assessment at a large Northeastern U.S. hospital. The resulting 301 TAT narratives were rated using the SCORS-G method. The 8 SCORS variables were found to have high interrater reliability and good internal consistency. Principal components analysis revealed a 3-component solution with components tapping emotions/affect regulation in relationships, self-image, and aspects of cognition. Next, the construct validity of the SCORS-G components was explored using measures of intellectual and executive functioning, psychopathology, and normal personality. The 3 SCORS-G components showed unique and theoretically meaningful relationships across these broad and diverse psychological measures. This study demonstrates the value of using a standardized scoring method, like the SCORS-G, to reveal the rich and complex nature of narrative material.

Constructive methods of invariant manifolds for kinetic problems

NASA Astrophysics Data System (ADS)

Gorban, Alexander N.; Karlin, Iliya V.; Zinovyev, Andrei Yu.

2004-06-01

The concept of the slow invariant manifold is recognized as the central idea underpinning a transition from micro to macro and model reduction in kinetic theories. We present the Constructive Methods of Invariant Manifolds for model reduction in physical and chemical kinetics, developed during last two decades. The physical problem of reduced description is studied in the most general form as a problem of constructing the slow invariant manifold. The invariance conditions are formulated as the differential equation for a manifold immersed in the phase space ( the invariance equation). The equation of motion for immersed manifolds is obtained ( the film extension of the dynamics). Invariant manifolds are fixed points for this equation, and slow invariant manifolds are Lyapunov stable fixed points, thus slowness is presented as stability. A collection of methods to derive analytically and to compute numerically the slow invariant manifolds is presented. Among them, iteration methods based on incomplete linearization, relaxation method and the method of invariant grids are developed. The systematic use of thermodynamics structures and of the quasi-chemical representation allow to construct approximations which are in concordance with physical restrictions. The following examples of applications are presented: nonperturbative deviation of physically consistent hydrodynamics from the Boltzmann equation and from the reversible dynamics, for Knudsen numbers Kn∼1; construction of the moment equations for nonequilibrium media and their dynamical correction (instead of extension of list of variables) to gain more accuracy in description of highly nonequilibrium flows; determination of molecules dimension (as diameters of equivalent hard spheres) from experimental viscosity data; model reduction in chemical kinetics; derivation and numerical implementation of constitutive equations for polymeric fluids; the limits of macroscopic description for polymer molecules, etc.

Economic aspects of interlocking hollow brick system designed for industrialized building system

NASA Astrophysics Data System (ADS)

Tahir, Mahmood Md.; Saggaff, Anis; Ngian, Shek Poi; Sulaiman, Arizu

2017-11-01

Construction industry has moved forward into a technology driven where a transition is in progress from conventional method to a more advanced and mechanised system known as the Industrialised Building System (IBS). However, the need to implement the IBS should be well understood by all construction players such as designer, architect, contraction, erectors and construction workers. Therefore, there is a need to educate all these construction players which should be spearheaded by authorities such as Construction Industrial Development Board where enforcement trough building by laws as well as initiative to those that adopt the IBS in their construction. This paper reports on economic aspects of using interlocking hollow brick system in construction as an alternative method offered for Industrialized Building System. The main objective is to address the economic aspects of using interlocking block system in terms of time, costs, and utilization of manpower and to present some of the experimental tests results related to Interlocking Hollow Brick System (IHBS). Example of savings from the use of IHBS is presented in this paper by comparing the construction of two storey terrace house with build-up area of about 200 square meter with conventional construction method of typical reinforced concrete construction (RCC) compared to IHBS. The comparison shows that the implementation of IHBS can reduce construction time, cost, and utilization of man power up to 26.6% compared to the conventional method. Moreover, the construction time using IHBS can also be reduced by up to 50% as compared to the conventional construction.

Socioecological Aspects of High-rise Construction

NASA Astrophysics Data System (ADS)

Eichner, Michael; Ivanova, Zinaida

2018-03-01

In this article, the authors consider the socioecological problems that arise in the construction and operation of high-rise buildings. They study different points of view on high-rise construction and note that the approaches to this problem are very different. They also analyse projects of modern architects and which attempts are made to overcome negative impacts on nature and mankind. The article contains materials of sociological research, confirming the ambivalent attitude of urban population to high-rise buildings. In addition, one of the author's sociological survey reveals the level of environmental preparedness of the university students, studying in the field of "Construction of unique buildings and structures", raising the question of how future specialists are ready to take into account socioecological problems. Conclusion of the authors: the construction of high-rise buildings is associated with huge social and environmental risks, negative impact on the biosphere and human health. This requires deepened skills about sustainable design methods and environmental friendly construction technologies of future specialists. Professor M. Eichner presents in the article his case study project results on implementation of holistic eco-sustainable construction principles for mixed-use high-rise building in the metropolis of Cairo.

Simultaneous construction of PCR-DGGE-based predictive models of Listeria monocytogenes and Vibrio parahaemolyticus on cooked shrimps.

PubMed

Liao, C; Peng, Z Y; Li, J B; Cui, X W; Zhang, Z H; Malakar, P K; Zhang, W J; Pan, Y J; Zhao, Y

2015-03-01

The aim of this study was to simultaneously construct PCR-DGGE-based predictive models of Listeria monocytogenes and Vibrio parahaemolyticus on cooked shrimps at 4 and 10°C. Calibration curves were established to correlate peak density of DGGE bands with microbial counts. Microbial counts derived from PCR-DGGE and plate methods were fitted by Baranyi model to obtain molecular and traditional predictive models. For L. monocytogenes, growing at 4 and 10°C, molecular predictive models were constructed. It showed good evaluations of correlation coefficients (R(2) > 0.92), bias factors (Bf ) and accuracy factors (Af ) (1.0 ≤ Bf ≤ Af ≤ 1.1). Moreover, no significant difference was found between molecular and traditional predictive models when analysed on lag phase (λ), maximum growth rate (μmax ) and growth data (P > 0.05). But for V. parahaemolyticus, inactivated at 4 and 10°C, molecular models show significant difference when compared with traditional models. Taken together, these results suggest that PCR-DGGE based on DNA can be used to construct growth models, but it is inappropriate for inactivation models yet. This is the first report of developing PCR-DGGE to simultaneously construct multiple molecular models. It has been known for a long time that microbial predictive models based on traditional plate methods are time-consuming and labour-intensive. Denaturing gradient gel electrophoresis (DGGE) has been widely used as a semiquantitative method to describe complex microbial community. In our study, we developed DGGE to quantify bacterial counts and simultaneously established two molecular predictive models to describe the growth and survival of two bacteria (Listeria monocytogenes and Vibrio parahaemolyticus) at 4 and 10°C. We demonstrated that PCR-DGGE could be used to construct growth models. This work provides a new approach to construct molecular predictive models and thereby facilitates predictive microbiology and QMRA (Quantitative Microbial Risk Assessment). © 2014 The Society for Applied Microbiology.

Study on the Quality Management of Building Electricity Engineering Construction in the Whole Process

NASA Astrophysics Data System (ADS)

Qin, Minwu

2018-05-01

With the progress of science and technology, people use more and more types of electrical equipment and the functions are more and more complicated, which put forward higher requirements on the construction quality of electrical construction. If you ignore some of the necessary quality requirements and violate the specification of operation in the process of building electrical construction, that will bring great security risks and resulting in huge economic losses, even endanger personal safety. Manage and control construction quality of building electrical construction must be carried out throughout the whole process of construction. According to the construction characteristics of building electrical construction, this article analyze the construction details that are easy to be ignored but very important in the construction, based on management theory and put forward the methods of quality management in the whole process of building electrical construction. This template explains and demonstrates how to prepare your camera-ready paper for Trans Tech Publications. The best is to read these instructions and follow the outline of this text.

Methods for generating or increasing revenues from crops

DOEpatents

Copenhaver, Gregory P.; Keith, Kevin; Preuss, Daphne

2007-03-20

The present invention provides methods of doing business and providing services. For example, methods of increasing the revenue of crops are provided. To this end, the method includes the use of a nucleic acid sequences of plant centromeres. This will permit construction of stably inherited recombinant DNA constructs and mini chromosomes which can serve as vectors for the construction of transgenic plant and animal cells.

Methodology for Developing and Evaluating the PROMIS® Smoking Item Banks

PubMed Central

Cai, Li; Stucky, Brian D.; Tucker, Joan S.; Shadel, William G.; Edelen, Maria Orlando

2014-01-01

Introduction: This article describes the procedures used in the PROMIS® Smoking Initiative for the development and evaluation of item banks, short forms (SFs), and computerized adaptive tests (CATs) for the assessment of 6 constructs related to cigarette smoking: nicotine dependence, coping expectancies, emotional and sensory expectancies, health expectancies, psychosocial expectancies, and social motivations for smoking. Methods: Analyses were conducted using response data from a large national sample of smokers. Items related to each construct were subjected to extensive item factor analyses and evaluation of differential item functioning (DIF). Final item banks were calibrated, and SF assessments were developed for each construct. The performance of the SFs and the potential use of the item banks for CAT administration were examined through simulation study. Results: Item selection based on dimensionality assessment and DIF analyses produced item banks that were essentially unidimensional in structure and free of bias. Simulation studies demonstrated that the constructs could be accurately measured with a relatively small number of carefully selected items, either through fixed SFs or CAT-based assessment. Illustrative results are presented, and subsequent articles provide detailed discussion of each item bank in turn. Conclusions: The development of the PROMIS smoking item banks provides researchers with new tools for measuring smoking-related constructs. The use of the calibrated item banks and suggested SF assessments will enhance the quality of score estimates, thus advancing smoking research. Moreover, the methods used in the current study, including innovative approaches to item selection and SF construction, may have general relevance to item bank development and evaluation. PMID:23943843

An Improved dem Construction Method for Mudflats Based on BJ-1 Small Satellite Images: a Case Study on Bohai Bay

NASA Astrophysics Data System (ADS)

Wu, D.; Du, Y.; Su, F.; Huang, W.; Zhang, L.

2018-04-01

The topographic measurement of muddy tidal flat is restricted by the difficulty of access to the complex, wide-range and dynamic tidal conditions. Then the waterline detection method (WDM) has the potential to investigate the morph-dynamics quantitatively by utilizing large archives of satellite images. The study explores the potential for using WDM with BJ-1 small satellite images to construct a digital elevation model (DEM) of a wide and grading mudflat. Three major conclusions of the study are as follows: (1) A new intelligent correlating model of waterline detection considering different tidal stages and local geographic conditions was explored. With this correlative algorithm waterline detection model, a series of waterlines were extracted from multi-temporal remotely sensing images collected over the period of a year. The model proved to detect waterlines more efficiently and exactly. (2) The spatial structure of elevation superimposing on the points of waterlines was firstly constructed and a more accurate hydrodynamic ocean tide grid model was used. By the newly constructed abnormal hydrology evaluation model, a more reasonable and reliable set of waterline points was acquired to construct a smoother TIN and GRID DEM. (3) DEM maps of Bohai Bay, with a spatial resolution of about 30 m and height accuracy of about 0.35 m considering LiDAR and 0.19 m considering RTK surveying were constructed over an area of about 266 km2. Results show that remote sensing research in extremely turbid estuaries and tidal areas is possible and is an effective tool for monitoring the tidal flats.

An optimal generic model for multi-parameters and big data optimizing: a laboratory experimental study

NASA Astrophysics Data System (ADS)

Utama, D. N.; Ani, N.; Iqbal, M. M.

2018-03-01

Optimization is a process for finding parameter (parameters) that is (are) able to deliver an optimal value for an objective function. Seeking an optimal generic model for optimizing is a computer science study that has been being practically conducted by numerous researchers. Generic model is a model that can be technically operated to solve any varieties of optimization problem. By using an object-oriented method, the generic model for optimizing was constructed. Moreover, two types of optimization method, simulated-annealing and hill-climbing, were functioned in constructing the model and compared to find the most optimal one then. The result said that both methods gave the same result for a value of objective function and the hill-climbing based model consumed the shortest running time.

Case Study on Project Risk Management Planning Based on Soft System Methodology

NASA Astrophysics Data System (ADS)

Lifang, Xie; Jun, Li

This paper analyzed the soft system characters of construction projects and the applicability on using Soft System Methodology (SSM) for risk analysis after a brief review of SSM. Taking a hydropower project as an example, it constructed the general frame of project risk management planning (PRMP) and established the Risk Management Planning (RMP) system from the perspective of the interests of co-ordination. This paper provided the ideas and methods for construction RMP under the win-win situation through the practice of SSM.

The Greenhouse Gas Emission from Portland Cement Concrete Pavement Construction in China.

PubMed

Ma, Feng; Sha, Aimin; Yang, Panpan; Huang, Yue

2016-06-24

This study proposes an inventory analysis method to evaluate the greenhouse gas (GHG) emissions from Portland cement concrete pavement construction, based on a case project in the west of China. The concrete pavement construction process was divided into three phases, namely raw material production, concrete manufacture and pavement onsite construction. The GHG emissions of the three phases are analyzed by a life cycle inventory method. The CO₂e is used to indicate the GHG emissions. The results show that for 1 km Portland cement concrete pavement construction, the total CO₂e is 8215.31 tons. Based on the evaluation results, the CO₂e of the raw material production phase is 7617.27 tons, accounting for 92.7% of the total GHG emissions; the CO₂e of the concrete manufacture phase is 598,033.10 kg, accounting for 7.2% of the total GHG emissions. Lastly, the CO₂e of the pavement onsite construction phase is 8396.59 kg, accounting for only 0.1% of the total GHG emissions. The main greenhouse gas is CO₂ in each phase, which accounts for more than 98% of total emissions. N₂O and CH₄ emissions are relatively insignificant.

Geomagnetism-Aided Indoor Wi-Fi Radio-Map Construction via Smartphone Crowdsourcing.

PubMed

Li, Wen; Wei, Dongyan; Lai, Qifeng; Li, Xianghong; Yuan, Hong

2018-05-08

Wi-Fi radio-map construction is an important phase in indoor fingerprint localization systems. Traditional methods for Wi-Fi radio-map construction have the problems of being time-consuming and labor-intensive. In this paper, an indoor Wi-Fi radio-map construction method is proposed which utilizes crowdsourcing data contributed by smartphone users. We draw indoor pathway map and construct Wi-Fi radio-map without requiring manual site survey, exact floor layout and extra infrastructure support. The key novelty is that it recognizes road segments from crowdsourcing traces by a cluster based on magnetism sequence similarity and constructs an indoor pathway map with Wi-Fi signal strengths annotated on. Through experiments in real world indoor areas, the method is proved to have good performance on magnetism similarity calculation, road segment clustering and pathway map construction. The Wi-Fi radio maps constructed by crowdsourcing data are validated to provide competitive indoor localization accuracy.

Geomagnetism-Aided Indoor Wi-Fi Radio-Map Construction via Smartphone Crowdsourcing

PubMed Central

Li, Wen; Wei, Dongyan; Lai, Qifeng; Li, Xianghong; Yuan, Hong

2018-01-01

Wi-Fi radio-map construction is an important phase in indoor fingerprint localization systems. Traditional methods for Wi-Fi radio-map construction have the problems of being time-consuming and labor-intensive. In this paper, an indoor Wi-Fi radio-map construction method is proposed which utilizes crowdsourcing data contributed by smartphone users. We draw indoor pathway map and construct Wi-Fi radio-map without requiring manual site survey, exact floor layout and extra infrastructure support. The key novelty is that it recognizes road segments from crowdsourcing traces by a cluster based on magnetism sequence similarity and constructs an indoor pathway map with Wi-Fi signal strengths annotated on. Through experiments in real world indoor areas, the method is proved to have good performance on magnetism similarity calculation, road segment clustering and pathway map construction. The Wi-Fi radio maps constructed by crowdsourcing data are validated to provide competitive indoor localization accuracy. PMID:29738454

The Effect of Explanations on Mathematical Reasoning Tasks

ERIC Educational Resources Information Center

Norqvist, Mathias

2018-01-01

Studies in mathematics education often point to the necessity for students to engage in more cognitively demanding activities than just solving tasks by applying given solution methods. Previous studies have shown that students that engage in creative mathematically founded reasoning to construct a solution method, perform significantly better in…

A numerical investigation into the performance of the soil nail wall and pile foundation at the Swift Delta I-5 Interchange.

DOT National Transportation Integrated Search

1993-12-01

Finite Difference Methods (FDM) and Finite Element Methods (FEM) studies are reported studying the soil nail wall construction at the Swift Delta I-5 Interchange bridge reconstruction in North Portland, Oregon. Five layers of soil nails were installe...

A case-control study of airways obstruction among construction workers.

PubMed

Dement, John; Welch, Laura; Ringen, Knut; Quinn, Patricia; Chen, Anna; Haas, Scott

2015-10-01

While smoking is the major cause of chronic obstructive pulmonary disease (COPD), occupational exposures to vapors, gases, dusts, and fumes (VGDF) increase COPD risk. This case-control study estimated the risk of COPD attributable to occupational exposures among construction workers. The study population included 834 cases and 1243 controls participating in a national medical screening program for older construction workers between 1997 and 2013. Qualitative exposure indices were developed based on lifetime work and exposure histories. Approximately 18% (95% CI = 2-24%) of COPD risk can be attributed to construction-related exposures, which are additive to the risk contributed by smoking. A measure of all VGDF exposures combined was a strong predictor of COPD risk. Construction workers are at increased risk of COPD as a result of broad and complex effects of many exposures acting independently or interactively. Control methods should be implemented to prevent worker exposures, and smoking cessation should be promoted. © 2015 The Authors. American Journal of Industrial Medicine Published by Wiley Periodicals, Inc.

The Use Potential of Traditional Building Materials for the Realization of Structures by Modern Methods of Construction

NASA Astrophysics Data System (ADS)

Spišáková, Marcela; Mačková, Daniela

2015-11-01

The sustainable building has taken off in recent years with many investors looking for new and different methods of construction. The traditional building materials can be made out of natural materials, while others can help to lower energy costs of the occupant once built. Regardless of what the goal of the investor is, traditional building materials and their use is on the rise. The submitted paper provides an overview of natural building materials and possible modern building systems using these construction materials. Based on the questionnaire survey is defined the use potential of traditional building materials for the realization of the construction by methods of modern constructions and then are determined the drivers and barriers of traditional materials through using modern methods of construction. Considering the analysis of the achieved results, we can identify the gaps in the construction market in Slovakia and also to assess the perception of potential investors in the field of traditional building materials use, which is the purpose of submitted paper.

The application of micro UAV in construction project

NASA Astrophysics Data System (ADS)

Kaamin, Masiri; Razali, Siti Nooraiin Mohd; Ahmad, Nor Farah Atiqah; Bukari, Saifullizan Mohd; Ngadiman, Norhayati; Kadir, Aslila Abd; Hamid, Nor Baizura

2017-10-01

In every outstanding construction project, there is definitely have an effective construction management. Construction management allows a construction project to be implemented according to plan. Every construction project must have a progress development works that is usually created by the site engineer. Documenting the progress of works is one of the requirements in construction management. In a progress report it is necessarily have a visual image as an evidence. The conventional method used for photographing on the construction site is by using common digital camera which is has few setback comparing to Micro Unmanned Aerial Vehicles (UAV). Besides, site engineer always have a current issues involving limitation of monitoring on high reach point and entire view of the construction site. The purpose of this paper is to provide a concise review of Micro UAV technology in monitoring the progress on construction site through visualization approach. The aims of this study are to replace the conventional method of photographing on construction site using Micro UAV which can portray the whole view of the building, especially on high reach point and allows to produce better images, videos and 3D model and also facilitating site engineer to monitor works in progress. The Micro UAV was flown around the building construction according to the Ground Control Points (GCPs) to capture images and record videos. The images taken from Micro UAV have been processed generate 3D model and were analysed to visualize the building construction as well as monitoring the construction progress work and provides immediate reliable data for project estimation. It has been proven that by using Micro UAV, a better images and videos can give a better overview of the construction site and monitor any defects on high reach point building structures. Not to be forgotten, with Micro UAV the construction site progress is more efficiently tracked and kept on the schedule.

Understanding working class lives: an examination of the quality of life of low income construction workers.

PubMed

Dhar, Rajib Lochan

2014-01-01

The construction industry is considered to be one of the oldest trades of mankind. Even though this industry has shown phenomenal growth in the developing economies like India, hardly any research has been done to understand the living condition and status of the people who have contributed with their sweat and blood for the growth of this industry. The study aims at understanding the living condition of the low income construction workers from one of the small construction companies of eastern India, from the state of Jharkhand. In all twelve families staying at the construction site agreed to volunteer. The average age of the respondent parents (i.e. mother as well as father) was 28.5 years. Qualitative methods have been used in order to collect the data. Ethnography and photo elicitation was used as a primary method of data collection. Apart from this, in-depth interviews were also conducted with the workers of the construction company. Discussion with the participants led to the emergence of four themes. They were (1) Daily Rituals, (2) Living Condition, (3) Quality of food and (4) Health and Hygiene. The research findings indicate that the conditions at which the workers live at the construction site can be considered to be in a state of pitiful situation which is mainly due to their acute level of poverty. Based on the study findings, there is an imperative that the societal forerunners, policy makers and philanthropists continue to use research findings to understand the living condition of the low income construction workers and draft strategies accordingly, to improve their status and Quality of Life.

Towards a conceptual framework demonstrating the effectiveness of audiovisual patient descriptions (patient video cases): a review of the current literature

PubMed Central

2012-01-01

Background Technological advances have enabled the widespread use of video cases via web-streaming and online download as an educational medium. The use of real subjects to demonstrate acute pathology should aid the education of health care professionals. However, the methodology by which this effect may be tested is not clear. Methods We undertook a literature review of major databases, found relevant articles relevant to using patient video cases as educational interventions, extracted the methodologies used and assessed these methods for internal and construct validity. Results A review of 2532 abstracts revealed 23 studies meeting the inclusion criteria and a final review of 18 of relevance. Medical students were the most commonly studied group (10 articles) with a spread of learner satisfaction, knowledge and behaviour tested. Only two of the studies fulfilled defined criteria on achieving internal and construct validity. The heterogeneity of articles meant it was not possible to perform any meta-analysis. Conclusions Previous studies have not well classified which facet of training or educational outcome the study is aiming to explore and had poor internal and construct validity. Future research should aim to validate a particular outcome measure, preferably by reproducing previous work rather than adopting new methods. In particular cognitive processing enhancement, demonstrated in a number of the medical student studies, should be tested at a postgraduate level. PMID:23256787

Regional approaches in high-rise construction

NASA Astrophysics Data System (ADS)

Iconopisceva, O. G.; Proskurin, G. A.

2018-03-01

The evolutionary process of high-rise construction is in the article focus. The aim of the study was to create a retrospective matrix reflecting the tasks of the study such as: structuring the most iconic high-rise objects within historic boundaries. The study is based on contemporary experience of high-rise construction in different countries. The main directions and regional specifics in the field of high-rise construction as well as factors influencing the further evolution process are analyzed. The main changes in architectural stylistics, form-building, constructive solutions that focus on the principles of energy efficiency and bio positivity of "sustainable buildings", as well as the search for a new typology are noted. The most universal constructive methods and solutions that turned out to be particularly popular are generalized. The new typology of high-rises and individual approach to urban context are noted. The results of the study as a graphical scheme made it possible to represent the whole high-rise evolution. The new spatial forms of high-rises lead them to new role within the urban environments. Futuristic hyperscalable concepts take the autonomous urban space functions itself and demonstrate us how high-rises can replace multifunctional urban fabric, developing it inside their shells.

Assessment of statistical methods used in library-based approaches to microbial source tracking.

PubMed

Ritter, Kerry J; Carruthers, Ethan; Carson, C Andrew; Ellender, R D; Harwood, Valerie J; Kingsley, Kyle; Nakatsu, Cindy; Sadowsky, Michael; Shear, Brian; West, Brian; Whitlock, John E; Wiggins, Bruce A; Wilbur, Jayson D

2003-12-01

Several commonly used statistical methods for fingerprint identification in microbial source tracking (MST) were examined to assess the effectiveness of pattern-matching algorithms to correctly identify sources. Although numerous statistical methods have been employed for source identification, no widespread consensus exists as to which is most appropriate. A large-scale comparison of several MST methods, using identical fecal sources, presented a unique opportunity to assess the utility of several popular statistical methods. These included discriminant analysis, nearest neighbour analysis, maximum similarity and average similarity, along with several measures of distance or similarity. Threshold criteria for excluding uncertain or poorly matched isolates from final analysis were also examined for their ability to reduce false positives and increase prediction success. Six independent libraries used in the study were constructed from indicator bacteria isolated from fecal materials of humans, seagulls, cows and dogs. Three of these libraries were constructed using the rep-PCR technique and three relied on antibiotic resistance analysis (ARA). Five of the libraries were constructed using Escherichia coli and one using Enterococcus spp. (ARA). Overall, the outcome of this study suggests a high degree of variability across statistical methods. Despite large differences in correct classification rates among the statistical methods, no single statistical approach emerged as superior. Thresholds failed to consistently increase rates of correct classification and improvement was often associated with substantial effective sample size reduction. Recommendations are provided to aid in selecting appropriate analyses for these types of data.

Q-Sample Construction: A Critical Step for a Q-Methodological Study.

PubMed

Paige, Jane B; Morin, Karen H

2016-01-01

Q-sample construction is a critical step in Q-methodological studies. Prior to conducting Q-studies, researchers start with a population of opinion statements (concourse) on a particular topic of interest from which a sample is drawn. These sampled statements are known as the Q-sample. Although literature exists on methodological processes to conduct Q-methodological studies, limited guidance exists on the practical steps to reduce the population of statements to a Q-sample. A case exemplar illustrates the steps to construct a Q-sample in preparation for a study that explored perspectives nurse educators and nursing students hold about simulation design. Experts in simulation and Q-methodology evaluated the Q-sample for readability, clarity, and for representativeness of opinions contained within the concourse. The Q-sample was piloted and feedback resulted in statement refinement. Researchers especially those undertaking Q-method studies for the first time may benefit from the practical considerations to construct a Q-sample offered in this article. © The Author(s) 2014.

A method to assess how interactive water simulation tools influence transdisciplinary decision-making processes in water management

NASA Astrophysics Data System (ADS)

Leskens, Johannes

2015-04-01

In modern water management, often transdisciplinary work sessions are organized in which various stakeholders participate to jointly define problems, choose measures and divide responsibilities to take actions. Involved stakeholders are for example policy analysts or decision-makers from municipalities, water boards or provinces, representatives of pressure groups and researchers from knowledge institutes. Parallel to this increasing attention for transdisciplinary work sessions, we see a growing availability of interactive IT-tools that can be applied during these sessions. For example, dynamic flood risk maps have become recently available that allow users during a work sessions to instantaneously assess the impact of storm surges or dam breaches, displayed on digital maps. Other examples are serious games, realistic visualizations and participatory simulations. However, the question is if and how these interactive IT-tools contribute to better decision-making. To assess this, we take the process of knowledge construction during a work session as a measure for the quality of decision-making. Knowledge construction can be defined as the process in which ideas, perspectives and opinions of different stakeholders, all having their own expertise and experience, are confronted with each other and new shared meanings towards water management issues are created. We present an assessment method to monitor the process of knowledge construction during work sessions in water management in which interactive IT tools are being used. The assessment method is based on a literature review, focusing on studies in which knowledge construction was monitored in other contexts that water management. To test the applicability of the assessment method, we applied it during a multi-stakeholder work session in Westland, located in the southwest of the Netherlands. The discussions during the work session were observed by camera. All statements, expressed by the various members of a stakeholder session, were classified according to our assessment method. We can draw the following preliminary conclusions. First, the case study showed that the method was useful to show the knowledge construction process over time, in terms of content and cognitive level of statements and interaction, attention and response between stakeholders. It was observed that the various aspects of knowledge construction all were influenced by the use of the 3Di model. The model focused discussions on technical issues of flood risk management, non-flood specialists were able to participate in discussions and in suggesting solutions and more topics could be evaluated in respect to non-interactive flood maps. Second, the method is considered useful as a benchmark for different interactive IT tools. The method is also considered useful to gain insight in how to optimally set-up multi-stakeholder meetings in which interactive IT-tools are being used. Further, the method can provide model developers insight in how to better meet the technical requirements of interactive IT tools to support the knowledge construction process during multi-stakeholder meeting

The Promotion Strategy of Green Construction Materials: A Path Analysis Approach

PubMed Central

Huang, Chung-Fah; Chen, Jung-Lu

2015-01-01

As one of the major materials used in construction, cement can be very resource-consuming and polluting to produce and use. Compared with traditional cement processing methods, dry-mix mortar is more environmentally friendly by reducing waste production or carbon emissions. Despite the continuous development and promotion of green construction materials, only a few of them are accepted or widely used in the market. In addition, the majority of existing research on green construction materials focuses more on their physical or chemical characteristics than on their promotion. Without effective promotion, their benefits cannot be fully appreciated and realized. Therefore, this study is conducted to explore the promotion of dry-mix mortars, one of the green materials. This study uses both qualitative and quantitative methods. First, through a case study, the potential of reducing carbon emission is verified. Then a path analysis is conducted to verify the validity and predictability of the samples based on the technology acceptance model (TAM) in this study. According to the findings of this research, to ensure better promotion results and wider application of dry-mix mortar, it is suggested that more systematic efforts be invested in promoting the usefulness and benefits of dry-mix mortar. The model developed in this study can provide helpful references for future research and promotion of other green materials. PMID:28793613

Examining Equivalence of Concepts and Measures in Diverse Samples

PubMed Central

Choi, Yoonsun; Abbott, Robert D.; Catalano, Richard F.; Bliesner, Siri L.

2012-01-01

While there is growing awareness for the need to examine the etiology of problem behaviors across cultural, racial, socioeconomic, and gender groups, much research tends to assume that constructs are equivalent and that the measures developed within one group equally assess constructs across groups. The meaning of constructs, however, may differ across groups or, if similar in meaning, measures developed for a given construct in one particular group may not be assessing the same construct or may not be assessing the construct in the same manner in other groups. The aims of this paper were to demonstrate a process of testing several forms of equivalence including conceptual, functional, item, and scalar using different methods. Data were from the Cross-Cultural Families Project, a study examining factors that promote the healthy development and adjustment of children among immigrant Cambodian and Vietnamese families. The process described in this paper can be implemented in other prevention studies interested in diverse groups. Demonstrating equivalence of constructs and measures prior to group comparisons is necessary in order to lend support of our interpretation of issues such as ethnic group differences and similarities. PMID:16845592

A Cultural Insight into the Development of Teacher Autonomy Support Scale: A Self-Determination Theory Perspective

ERIC Educational Resources Information Center

Awang-Hashim, Rosna; Thaliah, Rajaletchumi; Kaur, Amrita

2017-01-01

Purpose: The cross-cultural significance of autonomy within self-determination theory is divisive on universal significance. This paper aims to report a sequential exploratory mixed methods study conducted to construct and validate a scale to investigate how, in Malaysian context, the construct of autonomy is conceptualized in comparison with the…

Evaluating Students' Abilities to Construct Mathematical Models from Data Using Latent Class Analysis

ERIC Educational Resources Information Center

Brandriet, Alexandra; Rupp, Charlie A.; Lazenby, Katherine; Becker, Nicole M.

2018-01-01

Analyzing and interpreting data is an important science practice that contributes toward the construction of models from data; yet, there is evidence that students may struggle with making meaning of data. The study reported here focused on characterizing students' approaches to analyzing rate and concentration data in the context of method of…

Robotic Construction Kits as Computational Manipulatives for Learning in the STEM Disciplines

ERIC Educational Resources Information Center

Sullivan, Florence R.; Heffernan, John

2016-01-01

This article presents a systematic review of research related to the use of robotics construction kits (RCKs) in P-12 learning in the STEM disciplines for typically developing children. The purpose of this review is to configure primarily qualitative and mixed methods findings from studies meeting our selection and quality criterion to answer the…

An Evaluation of the Validity and Reliability of a Food Behavior Checklist Modified for Children

ERIC Educational Resources Information Center

Branscum, Paul; Sharma, Manoj; Kaye, Gail; Succop, Paul

2010-01-01

Objective: The objective of this study was to report the construct validity and internal consistency reliability of the Food Behavior Checklist modified for children (FBC-MC), with low-income, Youth Expanded Food and Nutrition Education Program (EFNEP)-eligible children. Methods: Using a cross-sectional research design, construct validity was…

Urban School Construction: A Case Study of Alternative Financing Methods for St. Louis, Missouri. A Report.

ERIC Educational Resources Information Center

Fitzgibbon, James; And Others

The authors, after discussing the St. Louis school system and its financial history, survey both traditional and innovative construction finance alternatives that have been used across the country. These alternatives, which fall into two categories, include: (1) conventional financing through tax incomes including State and Federal aid, and (2)…

A Comparison of Domain-Referenced and Classic Psychometric Test Construction Methods.

ERIC Educational Resources Information Center

Willoughby, Lee; And Others

This study compared a domain referenced approach with a traditional psychometric approach in the construction of a test. Results of the December, 1975 Quarterly Profile Exam (QPE) administered to 400 examinees at a university were the source of data. The 400 item QPE is a five alternative multiple choice test of information a "safe"…

Surface Erosion Control Techniques on Newly Constructed Forest Roads

Treesearch

Johnny M. Grace; John Wilhoit; Robert Rummer; Bryce Stokes

1999-01-01

A newly constructed forest road was treated with three erosion control treatments: wood excelsior erosion mat, native grass species, and exotic grass species. The study evaluates treatment methods on the basis of sediment reduction and runoff volume reduction compared to no treatment. The erosion mat treatment was most effective in mitigating erosion losses with a 98...

Oral Language and Listening Comprehension: Same or Different Constructs?

ERIC Educational Resources Information Center

Journal of Speech, Language, and Hearing Research, 2017

2017-01-01

Purpose: The purpose of this study was to add to our understanding of the dimensionality of oral language in children and to determine whether oral language and listening comprehension are separate constructs in children enrolled in preschool (PK) through 3rd grade. Method: In the spring of the school year, children from 4 states (N = 1,869)…

Examining Measurement Invariance and Differential Item Functioning with Discrete Latent Construct Indicators: A Note on a Multiple Testing Procedure

ERIC Educational Resources Information Center

Raykov, Tenko; Dimitrov, Dimiter M.; Marcoulides, George A.; Li, Tatyana; Menold, Natalja

2018-01-01

A latent variable modeling method for studying measurement invariance when evaluating latent constructs with multiple binary or binary scored items with no guessing is outlined. The approach extends the continuous indicator procedure described by Raykov and colleagues, utilizes similarly the false discovery rate approach to multiple testing, and…

Three-Dimensional Laser Scanning for Geometry Documentation and Construction Management of Highway Tunnels during Excavation

PubMed Central

Gikas, Vassilis

2012-01-01

Driven by progress in sensor technology, computer software and data processing capabilities, terrestrial laser scanning has recently proved a revolutionary technique for high accuracy, 3D mapping and documentation of physical scenarios and man-made structures. Particularly, this is of great importance in the underground space and tunnel construction environment as surveying engineering operations have a great impact on both technical and economic aspects of a project. This paper discusses the use and explores the potential of laser scanning technology to accurately track excavation and construction activities of highway tunnels. It provides a detailed overview of the static laser scanning method, its principles of operation and applications for tunnel construction operations. Also, it discusses the planning, execution, data processing and analysis phases of laser scanning activities, with emphasis given on geo-referencing, mesh model generation and cross-section extraction. Specific case studies are considered based on two construction sites in Greece. Particularly, the potential of the method is examined for checking the tunnel profile, producing volume computations and validating the smoothness/thickness of shotcrete layers at an excavation stage and during the completion of excavation support and primary lining. An additional example of the use of the method in the geometric documentation of the concrete lining formwork is examined and comparisons against dimensional tolerances are examined. Experimental comparisons and analyses of the laser scanning method against conventional surveying techniques are also considered. PMID:23112655

Robust Segmentation of Planar and Linear Features of Terrestrial Laser Scanner Point Clouds Acquired from Construction Sites.

PubMed

Maalek, Reza; Lichti, Derek D; Ruwanpura, Janaka Y

2018-03-08

Automated segmentation of planar and linear features of point clouds acquired from construction sites is essential for the automatic extraction of building construction elements such as columns, beams and slabs. However, many planar and linear segmentation methods use scene-dependent similarity thresholds that may not provide generalizable solutions for all environments. In addition, outliers exist in construction site point clouds due to data artefacts caused by moving objects, occlusions and dust. To address these concerns, a novel method for robust classification and segmentation of planar and linear features is proposed. First, coplanar and collinear points are classified through a robust principal components analysis procedure. The classified points are then grouped using a new robust clustering method, the robust complete linkage method. A robust method is also proposed to extract the points of flat-slab floors and/or ceilings independent of the aforementioned stages to improve computational efficiency. The applicability of the proposed method is evaluated in eight datasets acquired from a complex laboratory environment and two construction sites at the University of Calgary. The precision, recall, and accuracy of the segmentation at both construction sites were 96.8%, 97.7% and 95%, respectively. These results demonstrate the suitability of the proposed method for robust segmentation of planar and linear features of contaminated datasets, such as those collected from construction sites.

Robust Segmentation of Planar and Linear Features of Terrestrial Laser Scanner Point Clouds Acquired from Construction Sites

PubMed Central

Maalek, Reza; Lichti, Derek D; Ruwanpura, Janaka Y

2018-01-01

Automated segmentation of planar and linear features of point clouds acquired from construction sites is essential for the automatic extraction of building construction elements such as columns, beams and slabs. However, many planar and linear segmentation methods use scene-dependent similarity thresholds that may not provide generalizable solutions for all environments. In addition, outliers exist in construction site point clouds due to data artefacts caused by moving objects, occlusions and dust. To address these concerns, a novel method for robust classification and segmentation of planar and linear features is proposed. First, coplanar and collinear points are classified through a robust principal components analysis procedure. The classified points are then grouped using a new robust clustering method, the robust complete linkage method. A robust method is also proposed to extract the points of flat-slab floors and/or ceilings independent of the aforementioned stages to improve computational efficiency. The applicability of the proposed method is evaluated in eight datasets acquired from a complex laboratory environment and two construction sites at the University of Calgary. The precision, recall, and accuracy of the segmentation at both construction sites were 96.8%, 97.7% and 95%, respectively. These results demonstrate the suitability of the proposed method for robust segmentation of planar and linear features of contaminated datasets, such as those collected from construction sites. PMID:29518062

Transdiagnostic dimensions of anxiety: Neural mechanisms, executive functions, and new directions.

PubMed

Sharp, Paul B; Miller, Gregory A; Heller, Wendy

2015-11-01

Converging neuroscientific and psychological evidence points to several transdiagnostic factors that cut across DSM-defined disorders, which both affect and are affected by executive dysfunction. Two of these factors, anxious apprehension and anxious arousal, have helped bridge the gap between psychological and neurobiological models of anxiety. The present integration of diverse findings advances an understanding of the relationships between these transdiagnostic anxiety dimensions, their interactions with each other and executive function, and their neural mechanisms. Additionally, a discussion is provided concerning how these constructs fit within the Research Domain Criteria (RDoC) matrix developed by the National Institutes of Mental Health and how they relate to other anxiety constructs studied with different methods and at other units of analysis. Suggestions for future research are offered, including how to (1) improve measurement and delineation of these constructs, (2) use new neuroimaging methods and theoretical approaches of how the brain functions to build neural mechanistic models of these constructs, and (3) advance understanding of the relationships of these constructs to diverse emotional phenomena and executive functions. Copyright © 2015 Elsevier B.V. All rights reserved.

Implications of construction method and spatial scale on measures of the built environment.

PubMed

Strominger, Julie; Anthopolos, Rebecca; Miranda, Marie Lynn

2016-04-28

Research surrounding the built environment (BE) and health has resulted in inconsistent findings. Experts have identified the need to examine methodological choices, such as development and testing of BE indices at varying spatial scales. We sought to examine the impact of construction method and spatial scale on seven measures of the BE using data collected at two time points. The Children's Environmental Health Initiative conducted parcel-level assessments of 57 BE variables in Durham, NC (parcel N = 30,319). Based on a priori defined variable groupings, we constructed seven mutually exclusive BE domains (housing damage, property disorder, territoriality, vacancy, public nuisances, crime, and tenancy). Domain-based indices were developed according to four different index construction methods that differentially account for number of parcels and parcel area. Indices were constructed at the census block level and two alternative spatial scales that better depict the larger neighborhood context experienced by local residents: the primary adjacency community and secondary adjacency community. Spearman's rank correlation was used to assess if indices and relationships among indices were preserved across methods. Territoriality, public nuisances, and tenancy were weakly to moderately preserved across methods at the block level while all other indices were well preserved. Except for the relationships between public nuisances and crime or tenancy, and crime and housing damage or territoriality, relationships among indices were poorly preserved across methods. The number of indices affected by construction method increased as spatial scale increased, while the impact of construction method on relationships among indices varied according to spatial scale. We found that the impact of construction method on BE measures was index and spatial scale specific. Operationalizing and developing BE measures using alternative methods at varying spatial scales before connecting to health outcomes allows researchers to better understand how methodological decisions may affect associations between health outcomes and BE measures. To ensure that associations between the BE and health outcomes are not artifacts of methodological decisions, researchers would be well-advised to conduct sensitivity analysis using different construction methods. This approach may lead to more robust results regarding the BE and health outcomes.

A Bifactor Approach to Model Multifaceted Constructs in Statistical Mediation Analysis.

PubMed

Gonzalez, Oscar; MacKinnon, David P

Statistical mediation analysis allows researchers to identify the most important mediating constructs in the causal process studied. Identifying specific mediators is especially relevant when the hypothesized mediating construct consists of multiple related facets. The general definition of the construct and its facets might relate differently to an outcome. However, current methods do not allow researchers to study the relationships between general and specific aspects of a construct to an outcome simultaneously. This study proposes a bifactor measurement model for the mediating construct as a way to parse variance and represent the general aspect and specific facets of a construct simultaneously. Monte Carlo simulation results are presented to help determine the properties of mediated effect estimation when the mediator has a bifactor structure and a specific facet of a construct is the true mediator. This study also investigates the conditions when researchers can detect the mediated effect when the multidimensionality of the mediator is ignored and treated as unidimensional. Simulation results indicated that the mediation model with a bifactor mediator measurement model had unbiased and adequate power to detect the mediated effect with a sample size greater than 500 and medium a - and b -paths. Also, results indicate that parameter bias and detection of the mediated effect in both the data-generating model and the misspecified model varies as a function of the amount of facet variance represented in the mediation model. This study contributes to the largely unexplored area of measurement issues in statistical mediation analysis.

Measurement versus prediction in the construction of patient-reported outcome questionnaires: can we have our cake and eat it?

PubMed

Smits, Niels; van der Ark, L Andries; Conijn, Judith M

2017-11-02

Two important goals when using questionnaires are (a) measurement: the questionnaire is constructed to assign numerical values that accurately represent the test taker's attribute, and (b) prediction: the questionnaire is constructed to give an accurate forecast of an external criterion. Construction methods aimed at measurement prescribe that items should be reliable. In practice, this leads to questionnaires with high inter-item correlations. By contrast, construction methods aimed at prediction typically prescribe that items have a high correlation with the criterion and low inter-item correlations. The latter approach has often been said to produce a paradox concerning the relation between reliability and validity [1-3], because it is often assumed that good measurement is a prerequisite of good prediction. To answer four questions: (1) Why are measurement-based methods suboptimal for questionnaires that are used for prediction? (2) How should one construct a questionnaire that is used for prediction? (3) Do questionnaire-construction methods that optimize measurement and prediction lead to the selection of different items in the questionnaire? (4) Is it possible to construct a questionnaire that can be used for both measurement and prediction? An empirical data set consisting of scores of 242 respondents on questionnaire items measuring mental health is used to select items by means of two methods: a method that optimizes the predictive value of the scale (i.e., forecast a clinical diagnosis), and a method that optimizes the reliability of the scale. We show that for the two scales different sets of items are selected and that a scale constructed to meet the one goal does not show optimal performance with reference to the other goal. The answers are as follows: (1) Because measurement-based methods tend to maximize inter-item correlations by which predictive validity reduces. (2) Through selecting items that correlate highly with the criterion and lowly with the remaining items. (3) Yes, these methods may lead to different item selections. (4) For a single questionnaire: Yes, but it is problematic because reliability cannot be estimated accurately. For a test battery: Yes, but it is very costly. Implications for the construction of patient-reported outcome questionnaires are discussed.

Confidence intervals for population allele frequencies: the general case of sampling from a finite diploid population of any size.

PubMed

Fung, Tak; Keenan, Kevin

2014-01-01

The estimation of population allele frequencies using sample data forms a central component of studies in population genetics. These estimates can be used to test hypotheses on the evolutionary processes governing changes in genetic variation among populations. However, existing studies frequently do not account for sampling uncertainty in these estimates, thus compromising their utility. Incorporation of this uncertainty has been hindered by the lack of a method for constructing confidence intervals containing the population allele frequencies, for the general case of sampling from a finite diploid population of any size. In this study, we address this important knowledge gap by presenting a rigorous mathematical method to construct such confidence intervals. For a range of scenarios, the method is used to demonstrate that for a particular allele, in order to obtain accurate estimates within 0.05 of the population allele frequency with high probability (> or = 95%), a sample size of > 30 is often required. This analysis is augmented by an application of the method to empirical sample allele frequency data for two populations of the checkerspot butterfly (Melitaea cinxia L.), occupying meadows in Finland. For each population, the method is used to derive > or = 98.3% confidence intervals for the population frequencies of three alleles. These intervals are then used to construct two joint > or = 95% confidence regions, one for the set of three frequencies for each population. These regions are then used to derive a > or = 95%% confidence interval for Jost's D, a measure of genetic differentiation between the two populations. Overall, the results demonstrate the practical utility of the method with respect to informing sampling design and accounting for sampling uncertainty in studies of population genetics, important for scientific hypothesis-testing and also for risk-based natural resource management.

Evaluation of Hybrid Learning in a Construction Engineering Context: A Mixed-Method Approach

ERIC Educational Resources Information Center

Karabulut-Ilgu, Aliye; Jahren, Charles

2016-01-01

Engineering educators call for a widespread implementation of hybrid learning to respond to rapidly changing demands of the 21st century. In response to this call, a junior-level course in the Construction Engineering program entitled Construction Equipment and Heavy Construction Methods was converted into a hybrid learning model. The overarching…

Evaluation of real-time PCR detection methods for detecting rice products contaminated by rice genetically modified with a CpTI-KDEL-T-nos transgenic construct.

PubMed

Nakamura, Kosuke; Akiyama, Hiroshi; Kawano, Noriaki; Kobayashi, Tomoko; Yoshimatsu, Kayo; Mano, Junichi; Kitta, Kazumi; Ohmori, Kiyomi; Noguchi, Akio; Kondo, Kazunari; Teshima, Reiko

2013-12-01

Genetically modified (GM) rice (Oryza sativa) lines, such as insecticidal Kefeng and Kemingdao, have been developed and found unauthorised in processed rice products in many countries. Therefore, qualitative detection methods for the GM rice are required for the GM food regulation. A transgenic construct for expressing cowpea (Vigna unguiculata) trypsin inhibitor (CpTI) was detected in some imported processed rice products contaminated with Kemingdao. The 3' terminal sequence of the identified transgenic construct for expression of CpTI included an endoplasmic reticulum retention signal coding sequence (KDEL) and nopaline synthase terminator (T-nos). The sequence was identical to that in a report on Kefeng. A novel construct-specific real-time polymerase chain reaction (PCR) detection method for detecting the junction region sequence between the CpTI-KDEL and T-nos was developed. The imported processed rice products were evaluated for the contamination of the GM rice using the developed construct-specific real-time PCR methods, and detection frequency was compared with five event-specific detection methods. The construct-specific detection methods detected the GM rice at higher frequency than the event-specific detection methods. Therefore, we propose that the construct-specific detection method is a beneficial tool for screening the contamination of GM rice lines, such as Kefeng, in processed rice products for the GM food regulation. Copyright © 2013 Elsevier Ltd. All rights reserved.

The use of visual methods to explore how children construct and assign meaning to the "self" within two urban communities in the Western Cape, South Africa.

PubMed

Benninger, Elizabeth; Savahl, Shazly

2016-01-01

This study aimed to explore how children construct and assign meaning to the "self" within two urban communities of Cape Town in South Africa. Using a child participation methodological framework data were collected using Photovoice and community maps with 54 participants between the ages of 9 and 12. Feelings of safety, social connectedness, and children's spaces were found to be central to the ways in which the participants constructed and assigned meaning to the "self." The study provides implications for intervention programmes aimed at improving children's well-being to be inclusive of activities aimed at improving children's self-concept, including the construction of safe spaces for children to play, learn, and form meaningful relationships.

Drawing Inspiration from Human Brain Networks: Construction of Interconnected Virtual Networks

PubMed Central

Kominami, Daichi; Leibnitz, Kenji; Murata, Masayuki

2018-01-01

Virtualization of wireless sensor networks (WSN) is widely considered as a foundational block of edge/fog computing, which is a key technology that can help realize next-generation Internet of things (IoT) networks. In such scenarios, multiple IoT devices and service modules will be virtually deployed and interconnected over the Internet. Moreover, application services are expected to be more sophisticated and complex, thereby increasing the number of modifications required for the construction of network topologies. Therefore, it is imperative to establish a method for constructing a virtualized WSN (VWSN) topology that achieves low latency on information transmission and high resilience against network failures, while keeping the topological construction cost low. In this study, we draw inspiration from inter-modular connectivity in human brain networks, which achieves high performance when dealing with large-scale networks composed of a large number of modules (i.e., regions) and nodes (i.e., neurons). We propose a method for assigning inter-modular links based on a connectivity model observed in the cerebral cortex of the brain, known as the exponential distance rule (EDR) model. We then choose endpoint nodes of these links by controlling inter-modular assortativity, which characterizes the topological connectivity of brain networks. We test our proposed methods using simulation experiments. The results show that the proposed method based on the EDR model can construct a VWSN topology with an optimal combination of communication efficiency, robustness, and construction cost. Regarding the selection of endpoint nodes for the inter-modular links, the results also show that high assortativity enhances the robustness and communication efficiency because of the existence of inter-modular links of two high-degree nodes. PMID:29642483

Learning and cognitive styles in web-based learning: theory, evidence, and application.

PubMed

Cook, David A

2005-03-01

Cognitive and learning styles (CLS) have long been investigated as a basis to adapt instruction and enhance learning. Web-based learning (WBL) can reach large, heterogenous audiences, and adaptation to CLS may increase its effectiveness. Adaptation is only useful if some learners (with a defined trait) do better with one method and other learners (with a complementary trait) do better with another method (aptitude-treatment interaction). A comprehensive search of health professions education literature found 12 articles on CLS in computer-assisted learning and WBL. Because so few reports were found, research from non-medical education was also included. Among all the reports, four CLS predominated. Each CLS construct was used to predict relationships between CLS and WBL. Evidence was then reviewed to support or refute these predictions. The wholist-analytic construct shows consistent aptitude-treatment interactions consonant with predictions (wholists need structure, a broad-before-deep approach, and social interaction, while analytics need less structure and a deep-before-broad approach). Limited evidence for the active-reflective construct suggests aptitude-treatment interaction, with active learners doing better with interactive learning and reflective learners doing better with methods to promote reflection. As predicted, no consistent interaction between the concrete-abstract construct and computer format was found, but one study suggests that there is interaction with instructional method. Contrary to predictions, no interaction was found for the verbal-imager construct. Teachers developing WBL activities should consider assessing and adapting to accommodate learners defined by the wholist-analytic and active-reflective constructs. Other adaptations should be considered experimental. Further WBL research could clarify the feasibility and effectiveness of assessing and adapting to CLS.

Drawing Inspiration from Human Brain Networks: Construction of Interconnected Virtual Networks.

PubMed

Murakami, Masaya; Kominami, Daichi; Leibnitz, Kenji; Murata, Masayuki

2018-04-08

Virtualization of wireless sensor networks (WSN) is widely considered as a foundational block of edge/fog computing, which is a key technology that can help realize next-generation Internet of things (IoT) networks. In such scenarios, multiple IoT devices and service modules will be virtually deployed and interconnected over the Internet. Moreover, application services are expected to be more sophisticated and complex, thereby increasing the number of modifications required for the construction of network topologies. Therefore, it is imperative to establish a method for constructing a virtualized WSN (VWSN) topology that achieves low latency on information transmission and high resilience against network failures, while keeping the topological construction cost low. In this study, we draw inspiration from inter-modular connectivity in human brain networks, which achieves high performance when dealing with large-scale networks composed of a large number of modules (i.e., regions) and nodes (i.e., neurons). We propose a method for assigning inter-modular links based on a connectivity model observed in the cerebral cortex of the brain, known as the exponential distance rule (EDR) model. We then choose endpoint nodes of these links by controlling inter-modular assortativity, which characterizes the topological connectivity of brain networks. We test our proposed methods using simulation experiments. The results show that the proposed method based on the EDR model can construct a VWSN topology with an optimal combination of communication efficiency, robustness, and construction cost. Regarding the selection of endpoint nodes for the inter-modular links, the results also show that high assortativity enhances the robustness and communication efficiency because of the existence of inter-modular links of two high-degree nodes.

A Comparison of Programed Instruction with Conventional Methods for Teaching Two Units of Eighth Grade Science.

ERIC Educational Resources Information Center

Eshleman, Winston Hull

Compared were programed materials and conventional methods for teaching two units of eighth grade science. Programed materials used were linear programed books requiring constructed responses. The conventional methods included textbook study, written exercises, lectures, discussions, demonstrations, experiments, chalkboard drawings, films,…

Applying Sensor-Based Technology to Improve Construction Safety Management.

PubMed

Zhang, Mingyuan; Cao, Tianzhuo; Zhao, Xuefeng

2017-08-11

Construction sites are dynamic and complicated systems. The movement and interaction of people, goods and energy make construction safety management extremely difficult. Due to the ever-increasing amount of information, traditional construction safety management has operated under difficult circumstances. As an effective way to collect, identify and process information, sensor-based technology is deemed to provide new generation of methods for advancing construction safety management. It makes the real-time construction safety management with high efficiency and accuracy a reality and provides a solid foundation for facilitating its modernization, and informatization. Nowadays, various sensor-based technologies have been adopted for construction safety management, including locating sensor-based technology, vision-based sensing and wireless sensor networks. This paper provides a systematic and comprehensive review of previous studies in this field to acknowledge useful findings, identify the research gaps and point out future research directions.

Applying Sensor-Based Technology to Improve Construction Safety Management

PubMed Central

Zhang, Mingyuan; Cao, Tianzhuo; Zhao, Xuefeng

2017-01-01

Construction sites are dynamic and complicated systems. The movement and interaction of people, goods and energy make construction safety management extremely difficult. Due to the ever-increasing amount of information, traditional construction safety management has operated under difficult circumstances. As an effective way to collect, identify and process information, sensor-based technology is deemed to provide new generation of methods for advancing construction safety management. It makes the real-time construction safety management with high efficiency and accuracy a reality and provides a solid foundation for facilitating its modernization, and informatization. Nowadays, various sensor-based technologies have been adopted for construction safety management, including locating sensor-based technology, vision-based sensing and wireless sensor networks. This paper provides a systematic and comprehensive review of previous studies in this field to acknowledge useful findings, identify the research gaps and point out future research directions. PMID:28800061

Construction Method of Display Proposal for Commodities in Sales Promotion by Genetic Algorithm

NASA Astrophysics Data System (ADS)

Yumoto, Masaki

In a sales promotion task, wholesaler prepares and presents the display proposal for commodities in order to negotiate with retailer's buyers what commodities they should sell. For automating the sales promotion tasks, the proposal has to be constructed according to the target retailer's buyer. However, it is difficult to construct the proposal suitable for the target retail store because of too much combination of commodities. This paper proposes a construction method by Genetic algorithm (GA). The proposed method represents initial display proposals for commodities with genes, improve ones with the evaluation value by GA, and rearrange one with the highest evaluation value according to the classification of commodity. Through practical experiment, we can confirm that display proposal by the proposed method is similar with the one constructed by a wholesaler.

A simple method for construction of artificial microRNA vector in plant.

PubMed

Li, Yang; Li, Yang; Zhao, Sunping; Zhong, Sheng; Wang, Zhaohai; Ding, Bo; Li, Yangsheng

2014-10-01

Artificial microRNA (amiRNA) is a powerful tool for silencing genes in many plant species. Here we provide an easy method to construct amiRNA vectors that reinvents the Golden Gate cloning approach and features a novel system called top speed amiRNA construction (TAC). This speedy approach accomplishes one restriction-ligation step in only 5 min, allowing easy and high-throughput vector construction. Three primers were annealed to be a specific adaptor, then digested and ligated on our novel vector pTAC. Importantly, this method allows the recombined amiRNA constructs to maintain the precursor of osa-miR528 with exception of the desired amiRNA/amiRNA* sequences. Using this method, our results showed the expected decrease of targeted genes in Nicotiana benthamiana and Oryza sativa.

On the mathematical analysis of Ebola hemorrhagic fever: deathly infection disease in West African countries.

PubMed

Atangana, Abdon; Goufo, Emile Franc Doungmo

2014-01-01

For a given West African country, we constructed a model describing the spread of the deathly disease called Ebola hemorrhagic fever. The model was first constructed using the classical derivative and then converted to the generalized version using the beta-derivative. We studied in detail the endemic equilibrium points and provided the Eigen values associated using the Jacobian method. We furthered our investigation by solving the model numerically using an iteration method. The simulations were done in terms of time and beta. The study showed that, for small portion of infected individuals, the whole country could die out in a very short period of time in case there is not good prevention.

Construction Theory and Noise Analysis Method of Global CGCS2000 Coordinate Frame

NASA Astrophysics Data System (ADS)

Jiang, Z.; Wang, F.; Bai, J.; Li, Z.

2018-04-01

The definition, renewal and maintenance of geodetic datum has been international hot issue. In recent years, many countries have been studying and implementing modernization and renewal of local geodetic reference coordinate frame. Based on the precise result of continuous observation for recent 15 years from state CORS (continuously operating reference system) network and the mainland GNSS (Global Navigation Satellite System) network between 1999 and 2007, this paper studies the construction of mathematical model of the Global CGCS2000 frame, mainly analyzes the theory and algorithm of two-step method for Global CGCS2000 Coordinate Frame formulation. Finally, the noise characteristic of the coordinate time series are estimated quantitatively with the criterion of maximum likelihood estimation.

Snow as building material for construction of technological along-the-route roads of main pipelines

NASA Astrophysics Data System (ADS)

Merdanov, S. M.; Egorov, A. L.; Kostyrchenko, V. A.; Madyarov, T. M.

2018-05-01

The article deals with the process of compacting snow in a closed volume with the use of vacuum processing for the construction of technological along-the-route roads of main pipelines. The relevance of the chosen study is substantiated; methods and designs for snow compaction are considered. The publication activity and defenses of doctoral and candidate dissertations on the research subject are analyzed. Patent analysis of existing methods and equipment for snow compaction with indication of their disadvantages is carried out. A design calculation was carried out using computer programs in which a strength calculation was performed to identify the most stressed places in the construction of a vibrating hydraulic tyre-type roller. A 3D model of the experimental setup was developed.

Workers' compensation costs among construction workers: a robust regression analysis.

PubMed

Friedman, Lee S; Forst, Linda S

2009-11-01

Workers' compensation data are an important source for evaluating costs associated with construction injuries. We describe the characteristics of injured construction workers filing claims in Illinois between 2000 and 2005 and the factors associated with compensation costs using a robust regression model. In the final multivariable model, the cumulative percent temporary and permanent disability-measures of severity of injury-explained 38.7% of the variance of cost. Attorney costs explained only 0.3% of the variance of the dependent variable. The model used in this study clearly indicated that percent disability was the most important determinant of cost, although the method and uniformity of percent impairment allocation could be better elucidated. There is a need to integrate analytical methods that are suitable for skewed data when analyzing claim costs.

Efficient Construction of Free Energy Profiles of Breathing Metal–Organic Frameworks Using Advanced Molecular Dynamics Simulations

PubMed Central

2017-01-01

In order to reliably predict and understand the breathing behavior of highly flexible metal–organic frameworks from thermodynamic considerations, an accurate estimation of the free energy difference between their different metastable states is a prerequisite. Herein, a variety of free energy estimation methods are thoroughly tested for their ability to construct the free energy profile as a function of the unit cell volume of MIL-53(Al). The methods comprise free energy perturbation, thermodynamic integration, umbrella sampling, metadynamics, and variationally enhanced sampling. A series of molecular dynamics simulations have been performed in the frame of each of the five methods to describe structural transformations in flexible materials with the volume as the collective variable, which offers a unique opportunity to assess their computational efficiency. Subsequently, the most efficient method, umbrella sampling, is used to construct an accurate free energy profile at different temperatures for MIL-53(Al) from first principles at the PBE+D3(BJ) level of theory. This study yields insight into the importance of the different aspects such as entropy contributions and anharmonic contributions on the resulting free energy profile. As such, this thorough study provides unparalleled insight in the thermodynamics of the large structural deformations of flexible materials. PMID:29131647

Efficient Construction of Free Energy Profiles of Breathing Metal-Organic Frameworks Using Advanced Molecular Dynamics Simulations.

PubMed

Demuynck, Ruben; Rogge, Sven M J; Vanduyfhuys, Louis; Wieme, Jelle; Waroquier, Michel; Van Speybroeck, Veronique

2017-12-12

In order to reliably predict and understand the breathing behavior of highly flexible metal-organic frameworks from thermodynamic considerations, an accurate estimation of the free energy difference between their different metastable states is a prerequisite. Herein, a variety of free energy estimation methods are thoroughly tested for their ability to construct the free energy profile as a function of the unit cell volume of MIL-53(Al). The methods comprise free energy perturbation, thermodynamic integration, umbrella sampling, metadynamics, and variationally enhanced sampling. A series of molecular dynamics simulations have been performed in the frame of each of the five methods to describe structural transformations in flexible materials with the volume as the collective variable, which offers a unique opportunity to assess their computational efficiency. Subsequently, the most efficient method, umbrella sampling, is used to construct an accurate free energy profile at different temperatures for MIL-53(Al) from first principles at the PBE+D3(BJ) level of theory. This study yields insight into the importance of the different aspects such as entropy contributions and anharmonic contributions on the resulting free energy profile. As such, this thorough study provides unparalleled insight in the thermodynamics of the large structural deformations of flexible materials.

Imaging Strategies for Tissue Engineering Applications

PubMed Central

Nam, Seung Yun; Ricles, Laura M.; Suggs, Laura J.

2015-01-01

Tissue engineering has evolved with multifaceted research being conducted using advanced technologies, and it is progressing toward clinical applications. As tissue engineering technology significantly advances, it proceeds toward increasing sophistication, including nanoscale strategies for material construction and synergetic methods for combining with cells, growth factors, or other macromolecules. Therefore, to assess advanced tissue-engineered constructs, tissue engineers need versatile imaging methods capable of monitoring not only morphological but also functional and molecular information. However, there is no single imaging modality that is suitable for all tissue-engineered constructs. Each imaging method has its own range of applications and provides information based on the specific properties of the imaging technique. Therefore, according to the requirements of the tissue engineering studies, the most appropriate tool should be selected among a variety of imaging modalities. The goal of this review article is to describe available biomedical imaging methods to assess tissue engineering applications and to provide tissue engineers with criteria and insights for determining the best imaging strategies. Commonly used biomedical imaging modalities, including X-ray and computed tomography, positron emission tomography and single photon emission computed tomography, magnetic resonance imaging, ultrasound imaging, optical imaging, and emerging techniques and multimodal imaging, will be discussed, focusing on the latest trends of their applications in recent tissue engineering studies. PMID:25012069

3D Modeling as Method for Construction and Analysis of Graphic Objects

NASA Astrophysics Data System (ADS)

Kheyfets, A. L.; Vasilieva, V. N.

2017-11-01

The use of 3D modeling when constructing and analyzing perspective projections and shadows is considered. The creation of photorealistic image is shown. The perspective of the construction project and characterization of its image are given as an example. The authors consider the construction of a dynamic block as a means of graphical information storage and automation of geometric constructions. The example of the dynamic block construction at creating a truss node is demonstrated. The constructions are considered as applied to the Auto-CAD software. The paper is aimed at improving the graphic methods of architectural design and improving the educational process when training the Bachelor’s degree students majoring in construction.

Constructs and methods for genome editing and genetic engineering of fungi and protists

DOEpatents

Hittinger, Christopher Todd; Alexander, William Gerald

2018-01-30

Provided herein are constructs for genome editing or genetic engineering in fungi or protists, methods of using the constructs and media for use in selecting cells. The construct include a polynucleotide encoding a thymidine kinase operably connected to a promoter, suitably a constitutive promoter; a polynucleotide encoding an endonuclease operably connected to an inducible promoter; and a recognition site for the endonuclease. The constructs may also include selectable markers for use in selecting recombinations.

Association of Aging-Related Endophenotypes With Mortality in 2 Cohort Studies: the Long Life Family Study and the Health, Aging and Body Composition Study.

PubMed

Singh, Jatinder; Schupf, Nicole; Boudreau, Robert; Matteini, Amy M; Prasad, Tanushree; Newman, Anne B; Liu, YongMei; Christensen, Kaare; Kammerer, Candace M

2015-12-01

One method by which to identify fundamental biological processes that may contribute to age-related disease and disability, instead of disease-specific processes, is to construct endophenotypes comprising linear combinations of physiological measures. Applying factor analyses methods to phenotypic data (2006-2009) on 28 traits representing 5 domains (cognitive, cardiovascular, metabolic, physical, and pulmonary) from 4,472 US and Danish individuals in 574 pedigrees from the Long Life Family Study (United States and Denmark), we constructed endophenotypes and assessed their relationship with mortality. The most dominant endophenotype primarily reflected the physical activity and pulmonary domains, was heritable, was significantly associated with mortality, and attenuated the association of age with mortality by 24.1%. Using data (1997-1998) on 1,794 Health, Aging and Body Composition Study participants from Memphis, Tennessee, and Pittsburgh, Pennsylvania, we obtained strikingly similar endophenotypes and relationships to mortality. We also reproduced the endophenotype constructs, especially the dominant physical activity and pulmonary endophenotype, within demographic subpopulations of these 2 cohorts. Thus, this endophenotype construct may represent an underlying phenotype related to aging. Additional genetic studies of this endophenotype may help identify genetic variants or networks that contribute to the aging process. © The Author 2015. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Integrated cellular network of transcription regulations and protein-protein interactions

PubMed Central

2010-01-01

Background With the accumulation of increasing omics data, a key goal of systems biology is to construct networks at different cellular levels to investigate cellular machinery of the cell. However, there is currently no satisfactory method to construct an integrated cellular network that combines the gene regulatory network and the signaling regulatory pathway. Results In this study, we integrated different kinds of omics data and developed a systematic method to construct the integrated cellular network based on coupling dynamic models and statistical assessments. The proposed method was applied to S. cerevisiae stress responses, elucidating the stress response mechanism of the yeast. From the resulting integrated cellular network under hyperosmotic stress, the highly connected hubs which are functionally relevant to the stress response were identified. Beyond hyperosmotic stress, the integrated network under heat shock and oxidative stress were also constructed and the crosstalks of these networks were analyzed, specifying the significance of some transcription factors to serve as the decision-making devices at the center of the bow-tie structure and the crucial role for rapid adaptation scheme to respond to stress. In addition, the predictive power of the proposed method was also demonstrated. Conclusions We successfully construct the integrated cellular network which is validated by literature evidences. The integration of transcription regulations and protein-protein interactions gives more insight into the actual biological network and is more predictive than those without integration. The method is shown to be powerful and flexible and can be used under different conditions and for different species. The coupling dynamic models of the whole integrated cellular network are very useful for theoretical analyses and for further experiments in the fields of network biology and synthetic biology. PMID:20211003

Integrated cellular network of transcription regulations and protein-protein interactions.

PubMed

Wang, Yu-Chao; Chen, Bor-Sen

2010-03-08

With the accumulation of increasing omics data, a key goal of systems biology is to construct networks at different cellular levels to investigate cellular machinery of the cell. However, there is currently no satisfactory method to construct an integrated cellular network that combines the gene regulatory network and the signaling regulatory pathway. In this study, we integrated different kinds of omics data and developed a systematic method to construct the integrated cellular network based on coupling dynamic models and statistical assessments. The proposed method was applied to S. cerevisiae stress responses, elucidating the stress response mechanism of the yeast. From the resulting integrated cellular network under hyperosmotic stress, the highly connected hubs which are functionally relevant to the stress response were identified. Beyond hyperosmotic stress, the integrated network under heat shock and oxidative stress were also constructed and the crosstalks of these networks were analyzed, specifying the significance of some transcription factors to serve as the decision-making devices at the center of the bow-tie structure and the crucial role for rapid adaptation scheme to respond to stress. In addition, the predictive power of the proposed method was also demonstrated. We successfully construct the integrated cellular network which is validated by literature evidences. The integration of transcription regulations and protein-protein interactions gives more insight into the actual biological network and is more predictive than those without integration. The method is shown to be powerful and flexible and can be used under different conditions and for different species. The coupling dynamic models of the whole integrated cellular network are very useful for theoretical analyses and for further experiments in the fields of network biology and synthetic biology.

Developmental Investigation of the Domain-Specific Nature of the Life Satisfaction Construct across the Post-School Transition

ERIC Educational Resources Information Center

Chen, Xidan; Morin, Alexandre J. S.; Parker, Philip D.; Marsh, Herbert W.

2015-01-01

This study evaluated the nature of the life satisfaction construct with an emphasis on the comparison between a global or domain-specific operationalization during the transition from adolescence to adulthood. A combination of person-centered and variable-centered methods were used to analyze 7 waves of data covering the postschool transition from…

Parent- and Self-Reported Dimensions of Oppositionality in Youth: Construct Validity, Concurrent Validity, and the Prediction of Criminal Outcomes in Adulthood

ERIC Educational Resources Information Center

Aebi, Marcel; Plattner, Belinda; Metzke, Christa Winkler; Bessler, Cornelia; Steinhausen, Hans-Christoph

2013-01-01

Background: Different dimensions of oppositional defiant disorder (ODD) have been found as valid predictors of further mental health problems and antisocial behaviors in youth. The present study aimed at testing the construct, concurrent, and predictive validity of ODD dimensions derived from parent- and self-report measures. Method: Confirmatory…

Development and testing of a cultural identity construct for recreation and tourism studies

Treesearch

Patrick T. Tierney

1995-01-01

A cultural identity construct for use in recreation re-search was developed. Findings from a survey of 233 university students in San Francisco, suggest that ethnic identity can be quantified and is an important factor influencing differences in vacation travel participation, motivations and barriers. The method used can be applied in diverse multi-cultural settings....

Study on Resources Assessment of Coal Seams covered by Long-Distance Oil & Gas Pipelines

NASA Astrophysics Data System (ADS)

Han, Bing; Fu, Qiang; Pan, Wei; Hou, Hanfang

2018-01-01

The assessment of mineral resources covered by construction projects plays an important role in reducing the overlaying of important mineral resources and ensuring the smooth implementation of construction projects. To take a planned long-distance gas pipeline as an example, the assessment method and principles for coal resources covered by linear projects are introduced. The areas covered by multiple coal seams are determined according to the linear projection method, and the resources covered by pipelines directly and indirectly are estimated by using area segmentation method on the basis of original blocks. The research results can provide references for route optimization of projects and compensation for mining right..

Constructing a Watts-Strogatz network from a small-world network with symmetric degree distribution.

PubMed

Menezes, Mozart B C; Kim, Seokjin; Huang, Rongbing

2017-01-01

Though the small-world phenomenon is widespread in many real networks, it is still challenging to replicate a large network at the full scale for further study on its structure and dynamics when sufficient data are not readily available. We propose a method to construct a Watts-Strogatz network using a sample from a small-world network with symmetric degree distribution. Our method yields an estimated degree distribution which fits closely with that of a Watts-Strogatz network and leads into accurate estimates of network metrics such as clustering coefficient and degree of separation. We observe that the accuracy of our method increases as network size increases.

25 CFR 900.125 - What shall a construction contract proposal contain?

Code of Federal Regulations, 2012 CFR

2012-04-01

... tribal building codes and engineering standards; (4) Structural integrity; (5) Accountability of funds..., standards and methods (including national, regional, state, or tribal building codes or construction... methods (including national, regional, state, or tribal building codes or construction industry standards...

25 CFR 900.125 - What shall a construction contract proposal contain?

Code of Federal Regulations, 2014 CFR

2014-04-01

... tribal building codes and engineering standards; (4) Structural integrity; (5) Accountability of funds..., standards and methods (including national, regional, state, or tribal building codes or construction... methods (including national, regional, state, or tribal building codes or construction industry standards...

25 CFR 900.125 - What shall a construction contract proposal contain?

Code of Federal Regulations, 2013 CFR

2013-04-01

... tribal building codes and engineering standards; (4) Structural integrity; (5) Accountability of funds..., standards and methods (including national, regional, state, or tribal building codes or construction... methods (including national, regional, state, or tribal building codes or construction industry standards...

25 CFR 900.125 - What shall a construction contract proposal contain?

Code of Federal Regulations, 2011 CFR

2011-04-01

... tribal building codes and engineering standards; (4) Structural integrity; (5) Accountability of funds..., standards and methods (including national, regional, state, or tribal building codes or construction... methods (including national, regional, state, or tribal building codes or construction industry standards...

25 CFR 900.125 - What shall a construction contract proposal contain?

Code of Federal Regulations, 2010 CFR

2010-04-01

... tribal building codes and engineering standards; (4) Structural integrity; (5) Accountability of funds..., standards and methods (including national, regional, state, or tribal building codes or construction... methods (including national, regional, state, or tribal building codes or construction industry standards...

Testing the feasibility of eliciting preferences for health states from adolescents using direct methods.

PubMed

Crump, R Trafford; Lau, Ryan; Cox, Elizabeth; Currie, Gillian; Panepinto, Julie

2018-06-22

Measuring adolescents' preferences for health states can play an important role in evaluating the delivery of pediatric healthcare. However, formal evaluation of the common direct preference elicitation methods for health states has not been done with adolescents. Therefore, the purpose of this study is to test how these methods perform in terms of their feasibility, reliability, and validity for measuring health state preferences in adolescents. This study used a web-based survey of adolescents, 18 years of age or younger, living in the United States. The survey included four health states, each comprised of six attributes. Preferences for these health states were elicited using the visual analogue scale, time trade-off, and standard gamble. The feasibility, test-retest reliability, and construct validity of each of these preference elicitation methods were tested and compared. A total of 144 participants were included in this study. Using a web-based survey format to elicit preferences for health states from adolescents was feasible. A majority of participants completed all three elicitation methods, ranked those methods as being easy, with very few requiring assistance from someone else. However, all three elicitation methods demonstrated weak test-retest reliability, with Kendall's tau-a values ranging from 0.204 to 0.402. Similarly, all three methods demonstrated poor construct validity, with 9-50% of all rankings aligning with our expectations. There were no significant differences across age groups. Using a web-based survey format to elicit preferences for health states from adolescents is feasible. However, the reliability and construct validity of the methods used to elicit these preferences when using this survey format are poor. Further research into the effects of a web-based survey approach to eliciting preferences for health states from adolescents is needed before health services researchers or pediatric clinicians widely employ these methods.

A Poisson Log-Normal Model for Constructing Gene Covariation Network Using RNA-seq Data.

PubMed

Choi, Yoonha; Coram, Marc; Peng, Jie; Tang, Hua

2017-07-01

Constructing expression networks using transcriptomic data is an effective approach for studying gene regulation. A popular approach for constructing such a network is based on the Gaussian graphical model (GGM), in which an edge between a pair of genes indicates that the expression levels of these two genes are conditionally dependent, given the expression levels of all other genes. However, GGMs are not appropriate for non-Gaussian data, such as those generated in RNA-seq experiments. We propose a novel statistical framework that maximizes a penalized likelihood, in which the observed count data follow a Poisson log-normal distribution. To overcome the computational challenges, we use Laplace's method to approximate the likelihood and its gradients, and apply the alternating directions method of multipliers to find the penalized maximum likelihood estimates. The proposed method is evaluated and compared with GGMs using both simulated and real RNA-seq data. The proposed method shows improved performance in detecting edges that represent covarying pairs of genes, particularly for edges connecting low-abundant genes and edges around regulatory hubs.

On construction method of shipborne and airborne radar intelligence and related equipment knowledge graph

NASA Astrophysics Data System (ADS)

Hao, Ruizhe; Huang, Jian

2017-08-01

Knowledge graph construction in military intelligence domain is sprouting but technically immature. This paper presents a method to construct the heterogeneous knowledge graph in the field of shipborne and airborne radar and equipment. Based on the expert knowledge and the up-to-date Internet open source information, we construct the knowledge graph of radar characteristic information and the equipment respectively, and establish relationships between two graphs, providing the pipeline and method for the intelligence organization and management in the context of the crowding battlefields big data.

Storybridging: Four steps for constructing effective health narratives

PubMed Central

Boeijinga, Anniek; Hoeken, Hans; Sanders, José

2017-01-01

Objective: To develop a practical step-by-step approach to constructing narrative health interventions in response to the mixed results and wide diversity of narratives used in health-related narrative persuasion research. Method: Development work was guided by essential narrative characteristics as well as principles enshrined in the Health Action Process Approach. Results: The ‘storybridging’ method for constructing health narratives is described as consisting of four concrete steps: (a) identifying the stage of change, (b) identifying the key elements, (c) building the story, and (d) pre-testing the story. These steps are illustrated by means of a case study in which an effective narrative health intervention was developed for Dutch truck drivers: a high-risk, underprivileged occupational group. Conclusion: Although time and labour intensive, the Storybridging approach suggests integrating the target audience as an important stakeholder throughout the development process. Implications and recommendations are provided for health promotion targeting truck drivers specifically and for constructing narrative health interventions in general. PMID:29276232

Follow-up methods for retrospective cohort studies in New Zealand.

PubMed

Fawcett, Jackie; Garrett, Nick; Bates, Michael N

2002-01-01

To define a general methodology for maximising the success of follow-up processes for retrospective cohort studies in New Zealand, and to illustrate an approach to developing country-specific follow-up methodologies. We recently conducted a cohort study of mortality and cancer incidence in New Zealand professional fire fighters. A number of methods were used to trace vital status, including matching with records of the New Zealand Health Information Service (NZHIS), pension records of Work and Income New Zealand (WINZ), and electronic electoral rolls. Non-electronic methods included use of paper electoral rolls and the records of the Registrar of Births Deaths and Marriages. 95% of the theoretical person-years of follow-up of the cohort were traced using these methods. In terms of numbers of cohort members traced to end of follow-up, the most useful tracing methods were fire fighter employment records, the NZHIS, WINZ, and the electronic electoral rolls. The follow-up process used for the cohort study was highly successful. On the basis of this experience, we propose a generic, but flexible, model for follow-up of retrospective cohort studies in New Zealand. Similar models could be constructed for other countries. Successful follow-up of cohort studies is possible in New Zealand using established methods. This should encourage the use of cohort studies for the investigation of epidemiological issues. Similar models for follow-up processes could be constructed for other countries.

The essential role of social theory in qualitative public health research.

PubMed

Willis, Karen; Daly, Jeanne; Kealy, Michelle; Small, Rhonda; Koutroulis, Glenda; Green, Julie; Gibbs, Lisa; Thomas, Samantha

2007-10-01

To define the role of social theory and examine how research studies using qualitative methods can use social theory to generalize their results beyond the setting of the study or to other social groups. The assumptions underlying public health research using qualitative methods derive from a range of social theories that include conflict theory, structural functionalism, symbolic interactionism, the sociology of knowledge and feminism. Depending on the research problem, these and other social theories provide conceptual tools and models for constructing a suitable research framework, and for collecting and analysing data. In combination with the substantive health literature, the theoretical literature provides the conceptual bridge that links the conclusions of the study to other social groups and settings. While descriptive studies using qualitative research methods can generate important insights into social experience, the use of social theory in the construction and conduct of research enables researchers to extrapolate their findings to settings and groups broader than the ones in which the research was conducted.

Tunnel-construction methods and foraging path of a fossorial herbivore, Geomys bursarius

USGS Publications Warehouse

Andersen, Douglas C.

1988-01-01

The fossorial rodent Geomys bursarius excavates tunnels to find and gain access to belowground plant parts. This is a study of how the foraging path of this animal, as denoted by feeding-tunnel systems constructed within experimental gardens, reflects both adaptive behavior and constraints associated with the fossorial lifestyle. The principal method of tunnel construction involves the end-to-end linking of short, linear segments whose directionalities are bimodal, but symmetrically distributed about 0°. The sequence of construction of left- and right-directed segments is random, and segments tend to be equal in length. The resulting tunnel advances, zigzag-fashion, along a single heading. This linearity, and the tendency for branches to be orthogonal to the originating tunnel, are consistent with the search path predicted for a "harvesting animal" (Pyke, 1978) from optimal-foraging theory. A suite of physical and physiological constraints on the burrowing process, however, may be responsible for this geometric pattern. That is, by excavating in the most energy-efficient manner, G. bursarius automatically creates the basic components to an optimal-search path. The general search pattern was not influenced by habitat quality (plant density). Branch origins are located more often than expected at plants, demonstrating area-restricted search, a tactic commonly noted in aboveground foragers. The potential trade-offs between construction methods that minimize energy cost and those that minimize vulnerability to predators are discussed.

A methodology to quantitatively evaluate the safety of a glazing robot.

PubMed

Lee, Seungyeol; Yu, Seungnam; Choi, Junho; Han, Changsoo

2011-03-01

A new construction method using robots is spreading widely among construction sites in order to overcome labour shortages and frequent construction accidents. Along with economical efficiency, safety is a very important factor for evaluating the use of construction robots in construction sites. However, the quantitative evaluation of safety is difficult compared with that of economical efficiency. In this study, we suggested a safety evaluation methodology by defining the 'worker' and 'work conditions' as two risk factors, defining the 'worker' factor as posture load and the 'work conditions' factor as the work environment and the risk exposure time. The posture load evaluation reflects the risk of musculoskeletal disorders which can be caused by work posture and the risk of accidents which can be caused by reduced concentration. We evaluated the risk factors that may cause various accidents such as falling, colliding, capsizing, and squeezing in work environments, and evaluated the operational risk by considering worker exposure time to risky work environments. With the results of the evaluations for each factor, we calculated the general operational risk and deduced the improvement ratio in operational safety by introducing a construction robot. To verify these results, we compared the safety of the existing human manual labour and the proposed robotic labour construction methods for manipulating large glass panels. Copyright © 2010 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Membrane fouling in a submerged membrane bioreactor: New method and its applications in interfacial interaction quantification.

PubMed

Hong, Huachang; Cai, Xiang; Shen, Liguo; Li, Renjie; Lin, Hongjun

2017-10-01

Quantification of interfacial interactions between two rough surfaces represents one of the most pressing requirements for membrane fouling prediction and control in membrane bioreactors (MBRs). This study firstly constructed regularly rough membrane and particle surfaces by using rigorous mathematical equations. Thereafter, a new method involving surface element integration (SEI) method, differential geometry and composite Simpson's rule was proposed to quantify the interfacial interactions between the two constructed rough surfaces. This new method were then applied to investigate interfacial interactions in a MBR with the data of surface properties of membrane and foulants experimentally measured. The feasibility of the new method was verified. It was found that asperity amplitude and period of the membrane surface exerted profound effects on the total interaction. The new method had broad potential application fields especially including guiding membrane surface design for membrane fouling mitigation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Critical management practices influencing on-site waste minimization in construction projects.

PubMed

Ajayi, Saheed O; Oyedele, Lukumon O; Bilal, Muhammad; Akinade, Olugbenga O; Alaka, Hafiz A; Owolabi, Hakeem A

2017-01-01

As a result of increasing recognition of effective site management as the strategic approach for achieving the required performance in construction projects, this study seeks to identify the key site management practices that are requisite for construction waste minimization. A mixed methods approach, involving field study and survey research were used as means of data collection. After confirmation of construct validity and reliability of scale, data analysis was carried out through a combination of Kruskal-Wallis test, descriptive statistics and exploratory factor analysis. The study suggests that site management functions could significantly reduce waste generation through strict adherence to project drawings, and by ensuring fewer or no design changes during construction process. Provision of waste skips for specific materials and maximisation of on-site reuse of materials are also found to be among the key factors for engendering waste minimization. The result of factor analysis suggests four factors underlying on-site waste management practices with 96.093% of total variance. These measures include contractual provisions for waste minimization, waste segregation, maximisation of materials reuse and effective logistic management. Strategies through which each of the underlying measures could be achieved are further discussed in the paper. Findings of this study would assist construction site managers and other site operatives in reducing waste generated by construction activities. Copyright © 2016 Elsevier Ltd. All rights reserved.

Indigenous lunar construction materials

NASA Technical Reports Server (NTRS)

Rogers, Wayne; Sture, Stein

1991-01-01

The objectives are the following: to investigate the feasibility of the use of local lunar resources for construction of a lunar base structure; to develop a material processing method and integrate the method with design and construction of a pressurized habitation structure; to estimate specifications of the support equipment necessary for material processing and construction; and to provide parameters for systems models of lunar base constructions, supply, and operations. The topics are presented in viewgraph form and include the following: comparison of various lunar structures; guidelines for material processing methods; cast lunar regolith; examples of cast basalt components; cast regolith process; processing equipment; mechanical properties of cast basalt; material properties and structural design; and future work.

Material characterization of field-cast connection grouts.

DOT National Transportation Integrated Search

2013-01-01

Accelerated bridge construction methods can help increase safety and minimize the inconveniences to the traveling public. Many new construction methods have been investigated and implemented using prefabricated subassemblies on bridges. These methods...

Innovative rapid construction/reconstruction methods.

DOT National Transportation Integrated Search

2005-07-01

Innovative construction and reconstruction methods provide the opportunity to significantly reduce the time of roadway projects while maintaining the necessary quality of workmanship. The need for these rapid methods stems from the increase in ...

K-means clustering for support construction in diffractive imaging.

PubMed

Hattanda, Shunsuke; Shioya, Hiroyuki; Maehara, Yosuke; Gohara, Kazutoshi

2014-03-01

A method for constructing an object support based on K-means clustering of the object-intensity distribution is newly presented in diffractive imaging. This releases the adjustment of unknown parameters in the support construction, and it is well incorporated with the Gerchberg and Saxton diagram. A simple numerical simulation reveals that the proposed method is effective for dynamically constructing the support without an initial prior support.

Environmental Assessment for Restoration and Stabilization of Eastern Shoreline MacDill AFB, Florida

DTIC Science & Technology

2005-12-01

heal stress , and machinery injuries. Construction would not involve any unique hazards and all construction methods would comply with Occupational...slips, heat stress , and machinery injuries. Construction would not involve any unique hazards, and all construction methods would comply with OSHA...Chloropropane, Benzene, Cumine , Naphthalene, benzo(b)flouranthene, toluene Soils: Benzo(a)pyrene, dibenzo(a,h)anthracene, Pb, naphthalene, toluene Surface

Carbon footprint of construction using industrialised building system

NASA Astrophysics Data System (ADS)

Lim, P. Y.; Yahya, K.; Aminudin, E.; Zakaria, R.; Haron, Z.; Mohamad Zin, R.; Redzuan, A. A. H.

2017-11-01

Industrialised Building System (IBS) is more sustainable to the environment as compared to the conventional construction methods. However, the construction industry in Malaysia has low acceptance towards IBS due to the resistance to change and also lack of awareness towards sustainability development. Therefore, it is important to study the amount carbon footprint produced by IBS during its manufacturing and construction stage, and also the amount of carbon footprint produced by one meter square of gross floor area of IBS construction using Life Cycle Assessment (LCA) to ease future research through the comparison of the carbon footprint of IBS with the conventional building system. As a result, a case study on a residential type of construction in the vicinity of Johor Bahru, Malaysia was carried out to obtain the necessary data and result. From the data analysis, the amount of greenhouse gases (GHG) for a residential type IBS construction based on the raw materials and resources involved to manufacture and construct IBS components is 0.127 tonnes fossil CO2Eq per meter square. Raw material that contributed to the most amount of carbon footprint is Ordinary Portland Cement (OPC), followed by steel bars, autoclaved aerated blocks and diesel. The LCA data acquired will be very useful in implementing IBS in the residential type construction. As a result, the awareness towards sustainable construction using IBS can be improved.

Scientific Ground of a New Optical Device for Contactless Measurement of the Small Spatial Displacements of Control Object Surfaces

NASA Astrophysics Data System (ADS)

Miroshnichenko, I. P.; Parinov, I. A.

2017-06-01

It is proposed the computational-experimental ground of newly developed optical device for contactless measurement of small spatial displacements of control object surfaces based on the use of new methods of laser interferometry. The proposed device allows one to register linear and angular components of the small displacements of control object surfaces during the diagnosis of the condition of structural materials for forced elements of goods under exploring by using acoustic non-destructive testing methods. The described results are the most suitable for application in the process of high-precision measurements of small linear and angular displacements of control object surfaces during experimental research, the evaluation and diagnosis of the state of construction materials for forced elements of goods, the study of fast wave propagation in layered constructions of complex shape, manufactured of anisotropic composite materials, the study of damage processes in modern construction materials in mechanical engineering, shipbuilding, aviation, instrumentation, power engineering, etc.

Waste generated in high-rise buildings construction: a quantification model based on statistical multiple regression.

PubMed

Parisi Kern, Andrea; Ferreira Dias, Michele; Piva Kulakowski, Marlova; Paulo Gomes, Luciana

2015-05-01

Reducing construction waste is becoming a key environmental issue in the construction industry. The quantification of waste generation rates in the construction sector is an invaluable management tool in supporting mitigation actions. However, the quantification of waste can be a difficult process because of the specific characteristics and the wide range of materials used in different construction projects. Large variations are observed in the methods used to predict the amount of waste generated because of the range of variables involved in construction processes and the different contexts in which these methods are employed. This paper proposes a statistical model to determine the amount of waste generated in the construction of high-rise buildings by assessing the influence of design process and production system, often mentioned as the major culprits behind the generation of waste in construction. Multiple regression was used to conduct a case study based on multiple sources of data of eighteen residential buildings. The resulting statistical model produced dependent (i.e. amount of waste generated) and independent variables associated with the design and the production system used. The best regression model obtained from the sample data resulted in an adjusted R(2) value of 0.694, which means that it predicts approximately 69% of the factors involved in the generation of waste in similar constructions. Most independent variables showed a low determination coefficient when assessed in isolation, which emphasizes the importance of assessing their joint influence on the response (dependent) variable. Copyright © 2015 Elsevier Ltd. All rights reserved.

Optimal Item Selection with Credentialing Examinations.

ERIC Educational Resources Information Center

Hambleton, Ronald K.; And Others

The study compared two promising item response theory (IRT) item-selection methods, optimal and content-optimal, with two non-IRT item selection methods, random and classical, for use in fixed-length certification exams. The four methods were used to construct 20-item exams from a pool of approximately 250 items taken from a 1985 certification…

The Use of Triangulation Methods in Qualitative Educational Research

ERIC Educational Resources Information Center

Oliver-Hoyo, Maria; Allen, DeeDee

2006-01-01

Triangulation involves the careful reviewing of data collected through different methods in order to achieve a more accurate and valid estimate of qualitative results for a particular construct. This paper describes how we used three qualitative methods of data collection to study attitudes of students toward graphing, hands-on activities, and…

Constructing a community-level amenity index

Treesearch

Joanna Paulson Ganning; Courtney G. Flint

2010-01-01

The study of amenity-driven regional change has proliferated in recent years, especially in the American West. While methods of quantifying amenity levels have progressed, they usually rely on traditional and inflexible methods of creating indices. This research note describes a method of manual indexing that allows a flexible and replicable way of assessing amenity...

Application of constructed wetlands to the treatment of leachates from a municipal solid waste landfill in Ibadan, Nigeria.

PubMed

Aluko, Olufemi Oludare; Sridhar, M K C

2005-06-01

Leachates are wastewater generated principally from landfills and solid waste disposal sites. Leachates emanating from municipal wastes are a major source of surface and groundwater pollution worldwide. Globally, leachates have been implicated in low yield of farm produce, developmental anomalies, low birth weights, leukemia incidence, and other cancers in communities around the site. They have also been implicated in hazards to the environment, loss of biodiversity, and contamination of water sources. At Aba-Eku in Nigeria, leachates are being discharged into the Omi Stream without treatment. A study was conducted on a method of leachate treatment that passes the leachate through constructed wetlands using Ipomoea aquatica (Forsk), a locally available plant found close to the landfill site. The aim of the study was to evolve a sustainable and cost-effective method of treatment whose effluents can be discharged into the Omi Stream with no or minimal impact. The study was descriptive and analytical in design. Samples were collected and analyzed with standard methods for pH, suspended solids (SS), biochemical oxygen demand (BOD), chemical oxygen demand (COD), ammonia, nitrate, and trace metals. Raw leachates were turbid and amber in color and contained suspended solids (197.5 mg/L), ammonia (610.9 mg/L), lead (1.64 mg/L), iron (198.10 mg/L), and manganese (23.20 mg/L). When the leachates were passed through the constructed wetland with eight hours' detention time, effluents showed significant reductions in suspended solids (81.01 percent), BOD (86.03 percent), and ammonia (97.77 percent). The study shows that a constructed wetland is a feasible tool for the treatment of leachates before their disposal into the environment in Nigeria and can help safeguard environmental quality.

The Greenhouse Gas Emission from Portland Cement Concrete Pavement Construction in China

PubMed Central

Ma, Feng; Sha, Aimin; Yang, Panpan; Huang, Yue

2016-01-01

This study proposes an inventory analysis method to evaluate the greenhouse gas (GHG) emissions from Portland cement concrete pavement construction, based on a case project in the west of China. The concrete pavement construction process was divided into three phases, namely raw material production, concrete manufacture and pavement onsite construction. The GHG emissions of the three phases are analyzed by a life cycle inventory method. The CO2e is used to indicate the GHG emissions. The results show that for 1 km Portland cement concrete pavement construction, the total CO2e is 8215.31 tons. Based on the evaluation results, the CO2e of the raw material production phase is 7617.27 tons, accounting for 92.7% of the total GHG emissions; the CO2e of the concrete manufacture phase is 598,033.10 kg, accounting for 7.2% of the total GHG emissions. Lastly, the CO2e of the pavement onsite construction phase is 8396.59 kg, accounting for only 0.1% of the total GHG emissions. The main greenhouse gas is CO2 in each phase, which accounts for more than 98% of total emissions. N2O and CH4 emissions are relatively insignificant. PMID:27347987

Two-Way Gene Interaction From Microarray Data Based on Correlation Methods.

PubMed

Alavi Majd, Hamid; Talebi, Atefeh; Gilany, Kambiz; Khayyer, Nasibeh

2016-06-01

Gene networks have generated a massive explosion in the development of high-throughput techniques for monitoring various aspects of gene activity. Networks offer a natural way to model interactions between genes, and extracting gene network information from high-throughput genomic data is an important and difficult task. The purpose of this study is to construct a two-way gene network based on parametric and nonparametric correlation coefficients. The first step in constructing a Gene Co-expression Network is to score all pairs of gene vectors. The second step is to select a score threshold and connect all gene pairs whose scores exceed this value. In the foundation-application study, we constructed two-way gene networks using nonparametric methods, such as Spearman's rank correlation coefficient and Blomqvist's measure, and compared them with Pearson's correlation coefficient. We surveyed six genes of venous thrombosis disease, made a matrix entry representing the score for the corresponding gene pair, and obtained two-way interactions using Pearson's correlation, Spearman's rank correlation, and Blomqvist's coefficient. Finally, these methods were compared with Cytoscape, based on BIND, and Gene Ontology, based on molecular function visual methods; R software version 3.2 and Bioconductor were used to perform these methods. Based on the Pearson and Spearman correlations, the results were the same and were confirmed by Cytoscape and GO visual methods; however, Blomqvist's coefficient was not confirmed by visual methods. Some results of the correlation coefficients are not the same with visualization. The reason may be due to the small number of data.

The use of visual methods to explore how children construct and assign meaning to the “self” within two urban communities in the Western Cape, South Africa

PubMed Central

Benninger, Elizabeth; Savahl, Shazly

2016-01-01

This study aimed to explore how children construct and assign meaning to the “self” within two urban communities of Cape Town in South Africa. Using a child participation methodological framework data were collected using Photovoice and community maps with 54 participants between the ages of 9 and 12. Feelings of safety, social connectedness, and children's spaces were found to be central to the ways in which the participants constructed and assigned meaning to the “self.” The study provides implications for intervention programmes aimed at improving children's well-being to be inclusive of activities aimed at improving children's self-concept, including the construction of safe spaces for children to play, learn, and form meaningful relationships. PMID:27291161

Towards Interactive Construction of Topical Hierarchy: A Recursive Tensor Decomposition Approach

PubMed Central

Wang, Chi; Liu, Xueqing; Song, Yanglei; Han, Jiawei

2015-01-01

Automatic construction of user-desired topical hierarchies over large volumes of text data is a highly desirable but challenging task. This study proposes to give users freedom to construct topical hierarchies via interactive operations such as expanding a branch and merging several branches. Existing hierarchical topic modeling techniques are inadequate for this purpose because (1) they cannot consistently preserve the topics when the hierarchy structure is modified; and (2) the slow inference prevents swift response to user requests. In this study, we propose a novel method, called STROD, that allows efficient and consistent modification of topic hierarchies, based on a recursive generative model and a scalable tensor decomposition inference algorithm with theoretical performance guarantee. Empirical evaluation shows that STROD reduces the runtime of construction by several orders of magnitude, while generating consistent and quality hierarchies. PMID:26705505

Towards Interactive Construction of Topical Hierarchy: A Recursive Tensor Decomposition Approach.

PubMed

Wang, Chi; Liu, Xueqing; Song, Yanglei; Han, Jiawei

2015-08-01

Automatic construction of user-desired topical hierarchies over large volumes of text data is a highly desirable but challenging task. This study proposes to give users freedom to construct topical hierarchies via interactive operations such as expanding a branch and merging several branches. Existing hierarchical topic modeling techniques are inadequate for this purpose because (1) they cannot consistently preserve the topics when the hierarchy structure is modified; and (2) the slow inference prevents swift response to user requests. In this study, we propose a novel method, called STROD, that allows efficient and consistent modification of topic hierarchies, based on a recursive generative model and a scalable tensor decomposition inference algorithm with theoretical performance guarantee. Empirical evaluation shows that STROD reduces the runtime of construction by several orders of magnitude, while generating consistent and quality hierarchies.

A new method for overhead drilling.

PubMed

Rempel, David; Star, Demetra; Barr, Alan; Gibbons, Billy; Janowitz, Ira

2009-12-01

In the construction sector, overhead drilling into concrete or metal ceilings is a strenuous task associated with shoulder, neck and back musculoskeletal disorders due to the large applied forces and awkward arm postures. Two intervention devices, an inverted drill press and a foot lever design, were developed then compared to the usual method by construction workers performing their normal overhead drilling activities (n = 14). While the intervention devices were rated as less fatiguing than the usual method, their ratings on usability measures were worse than the usual method. The study demonstrates that the intervention devices can reduce fatigue; however, additional modifications are necessary in order to improve usability and productivity. Devices designed to improve workplace safety may need to undergo several rounds of field testing and modification prior to implementation.

A KST framework for correlation network construction from time series signals

NASA Astrophysics Data System (ADS)

Qi, Jin-Peng; Gu, Quan; Zhu, Ying; Zhang, Ping

2018-04-01

A KST (Kolmogorov-Smirnov test and T statistic) method is used for construction of a correlation network based on the fluctuation of each time series within the multivariate time signals. In this method, each time series is divided equally into multiple segments, and the maximal data fluctuation in each segment is calculated by a KST change detection procedure. Connections between each time series are derived from the data fluctuation matrix, and are used for construction of the fluctuation correlation network (FCN). The method was tested with synthetic simulations and the result was compared with those from using KS or T only for detection of data fluctuation. The novelty of this study is that the correlation analyses was based on the data fluctuation in each segment of each time series rather than on the original time signals, which would be more meaningful for many real world applications and for analysis of large-scale time signals where prior knowledge is uncertain.

The modification of renal transplantation with the usage of own polyethylene receptacle.

PubMed

Pupka, Artur; Chudoba, Paweł; Patrzałek, Dariusz; Janczak, Dariusz; Szyber, Piotr

2003-01-01

In this study a method of elimination of the second warm ischemia is shown. The method is based on the application of a specially constructed polyethylene bag, in which the transplanted kidney is placed in the time course from a removal from ice to the reconstruction of vessel flow. The bag is built of polyethylene foil HDPE of low density produced under high pressure. Own construction of the bag (three spaces and polyethylene) enables the storage of a transplanted organ at the stable temperature +4 Celsius degrees. Thanks to the separation of containers for melting ice and for the kidney, possible becomes unrestrained performance of both venous and arterial anastomosis independently of existing operative conditions. Due to the applied method of the elimination of the second warm ischemia with the usage of own construction of polyethylene bag HDPE, one can expect better early renal function after transplantation--decrease in the number of cases and shortening of the time of acute tubular necrosis (ATN--Acute Tubular Necrosis).

Relationship between time management in construction industry and project management performance

NASA Astrophysics Data System (ADS)

Nasir, Najuwa; Nawi, Mohd Nasrun Mohd; Radzuan, Kamaruddin

2016-08-01

Nowadays, construction industry particularly in Malaysia struggle in achieving status of eminent time management for construction project. Project managers have a great responsibility to keep the project success under time of project completion. However, studies shows that delays especially in Malaysian construction industry still unresolved due to weakness in managing the project. In addition, quality of time management on construction projects is generally poor. Due to the progressively extended delays issue, time performance becomes an important subject to be explored to investigate delay factors. The method of this study is review of literature towards issues in construction industry which affecting time performance of project in general by focusing towards process involved for project management. Based on study, it was found that knowledge, commitment, cooperation are the main criteria as an overall to manage the project into a smooth process during project execution until completion. It can be concluded that, the strength between project manager and team members in these main criteria while conducting the project towards good time performance is highly needed. However, there is lack of establishment towards factors of poor time performance which strongly related with project management. Hence, this study has been conducted to establish factors of poor time performance and its relations with project management.

Indoor 3D Route Modeling Based On Estate Spatial Data

NASA Astrophysics Data System (ADS)

Zhang, H.; Wen, Y.; Jiang, J.; Huang, W.

2014-04-01

Indoor three-dimensional route model is essential for space intelligence navigation and emergency evacuation. This paper is motivated by the need of constructing indoor route model automatically and as far as possible. By comparing existing building data sources, this paper firstly explained the reason why the estate spatial management data is chosen as the data source. Then, an applicable method of construction three-dimensional route model in a building is introduced by establishing the mapping relationship between geographic entities and their topological expression. This data model is a weighted graph consist of "node" and "path" to express the spatial relationship and topological structure of a building components. The whole process of modelling internal space of a building is addressed by two key steps: (1) each single floor route model is constructed, including path extraction of corridor using Delaunay triangulation algorithm with constrained edge, fusion of room nodes into the path; (2) the single floor route model is connected with stairs and elevators and the multi-floor route model is eventually generated. In order to validate the method in this paper, a shopping mall called "Longjiang New City Plaza" in Nanjing is chosen as a case of study. And the whole building space is constructed according to the modelling method above. By integrating of existing path finding algorithm, the usability of this modelling method is verified, which shows the indoor three-dimensional route modelling method based on estate spatial data in this paper can support indoor route planning and evacuation route design very well.

Realist explanatory theory building method for social epidemiology: a protocol for a mixed method multilevel study of neighbourhood context and postnatal depression.

PubMed

Eastwood, John G; Jalaludin, Bin B; Kemp, Lynn A

2014-01-01

A recent criticism of social epidemiological studies, and multi-level studies in particular has been a paucity of theory. We will present here the protocol for a study that aims to build a theory of the social epidemiology of maternal depression. We use a critical realist approach which is trans-disciplinary, encompassing both quantitative and qualitative traditions, and that assumes both ontological and hierarchical stratification of reality. We describe a critical realist Explanatory Theory Building Method comprising of an: 1) emergent phase, 2) construction phase, and 3) confirmatory phase. A concurrent triangulated mixed method multilevel cross-sectional study design is described. The Emergent Phase uses: interviews, focus groups, exploratory data analysis, exploratory factor analysis, regression, and multilevel Bayesian spatial data analysis to detect and describe phenomena. Abductive and retroductive reasoning will be applied to: categorical principal component analysis, exploratory factor analysis, regression, coding of concepts and categories, constant comparative analysis, drawing of conceptual networks, and situational analysis to generate theoretical concepts. The Theory Construction Phase will include: 1) defining stratified levels; 2) analytic resolution; 3) abductive reasoning; 4) comparative analysis (triangulation); 5) retroduction; 6) postulate and proposition development; 7) comparison and assessment of theories; and 8) conceptual frameworks and model development. The strength of the critical realist methodology described is the extent to which this paradigm is able to support the epistemological, ontological, axiological, methodological and rhetorical positions of both quantitative and qualitative research in the field of social epidemiology. The extensive multilevel Bayesian studies, intensive qualitative studies, latent variable theory, abductive triangulation, and Inference to Best Explanation provide a strong foundation for Theory Construction. The study will contribute to defining the role that realism and mixed methods can play in explaining the social determinants and developmental origins of health and disease.

A complementary marriage of perspectives: understanding organizational social context using mixed methods.

PubMed

Beidas, Rinad S; Wolk, Courtney L Benjamin; Walsh, Lucia M; Evans, Arthur C; Hurford, Matthew O; Barg, Frances K

2014-11-23

Organizational factors impact the delivery of mental health services in community settings. Mixed-methods analytic approaches have been recommended, though little research within implementation science has explicitly compared inductive and deductive perspectives to understand their relative value in understanding the same constructs. The purpose of our study is to use two different paradigmatic approaches to deepen our understanding of organizational social context. We accomplish this by using a mixed-methods approach in an investigation of organizational social context in community mental health clinics. Nineteen agencies, representing 23 sites, participated. Enrolled participants included 130 therapists, 36 supervisors, and 22 executive administrators. Quantitative data was obtained via the Organizational Social Context (OSC) measure. Qualitative data, comprised of direct observation with spot sampling generated from agency visits, was coded using content analysis and grounded theory. The present study examined elements of organizational social context that would have been missed if only quantitative data had been obtained and utilized mixed methods to investigate if stratifying observations based on quantitative ratings from the OSC resulted in the emergence of differential themes. Four of the six OSC constructs were commonly observed in field observations (i.e., proficiency, rigidity, functionality, stress), while the remaining two constructs were not frequently observed (i.e., resistance, engagement). Constructs emerged related to organizational social context that may have been missed if only quantitative measurement was employed, including those around the physical environment, commentary about evidence-based practice initiatives, leadership, cultural diversity, distrust, and affect. Stratifying agencies by "best," "average," and "worst" organizational social context impacted interpretation for three constructs (affect, stress, and leadership). Results support the additive value of integrating inductive and deductive perspectives in implementation science research. This synthesis of approaches facilitated a more comprehensive understanding and interpretation of the findings than would have been possible if either methodology had been employed in isolation.

7 CFR 1753.77 - Methods of minor construction.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., DEPARTMENT OF AGRICULTURE TELECOMMUNICATIONS SYSTEM CONSTRUCTION POLICIES AND PROCEDURES Minor Construction... Contract Form 773, “Miscellaneous Construction Work and Maintenance Services”, by RUS Contract Form 515, or by work order construction. The rules for using Form 515 for minor construction are contained in...

Study on energy consumption evaluation of mountainous highway based on LCA

NASA Astrophysics Data System (ADS)

Fei, Lunlin; Zhang, Qi; Xie, Yongqing

2017-06-01

For the system to understand the road construction energy consumption process, this paper selects a typical mountainous highway in the south, using the theory and method of Life Cycle Assessment (LCA) to quantitatively study the energy consumption of the whole process of highway raw materials production, construction and operation. The results show that the energy consumption in the raw material production stage is the highest, followed by the highway operation and construction stage. The energy consumption per unit of tunnel engineering, bridge engineering, roadbed engineering and pavement engineering in the construction phase are 2279.00 tce, 1718.07 tce, 542.19 tce and 34.02 tce, and in operational phase, 85.44% of electricity consumption comes from tunnel ventilation and lighting. Therefore, in the bridge and tunnel construction process, we should promote energy-saving innovation of the construction technology and mechanical equipment, and further strengthen the research and development of tunnel ventilation, lighting energy-saving equipment and intelligent control technology, which will help significantly reduce the energy consumption and greenhouse gas emissions of the life cycle of highway.

Behavioral Theory in a Diverse Society: Like a Compass on Mars

PubMed Central

Pasick, Rena J.; Burke, Nancy J.; Barker, Judith C.; Joseph, Galen; Bird, Joyce A.; Otero-Sabogal, Regina; Tuason, Noe; Stewart, Susan L.; Rakowski, William; Clark, Melissa A.; Washington, Pamela K.; Guerra, Claudia

2010-01-01

The behavioral theory constructs most often used to study mammography utilization—perceived benefit, perceived susceptibility, self-efficacy, intention, and subjective norms—have neither been developed nor sufficiently tested among diverse racial/ethnic subgroups. The authors explored these constructs and their underlying assumptions relating to the social context of Filipina and Latina women. The mixed-methods study included testing construct measures in the multilingual surveys of a concurrent intervention study of 1,463 women from five ethnic groups. An intensive inductive investigation then targeted Latina and Filipina women to elucidate connections between social context and individual screening behavior. In-depth interviews were conducted with 11 key informant scholars, 13 community gatekeepers, and 29 lay women, and a supplemental study videotaped and interviewed 9 mother–daughter dyads. Three social context domains emerged: relational culture, social capital, and transculturation and transmigration. The meaning and appropriateness of the five behavioral constructs were analyzed in relation to these domains. In contradistinction to tenets of behavioral theory, the authors found that social context can influence behavior directly, circumventing or attenuating the influence of individual beliefs; contextual influences, synthesized from multiple perspectives, can operate at an unconscious level not accessible to the individual; and contextual influences are dynamic, contingent on distal and proximal forces coming together in a given moment and are thus not consistent with an exclusive focus at the individual level. This article describes the study methods, summarizes main findings, and previews the detailed results presented in the other articles in this issue. PMID:19805789

NASA Tech House: An early evaluation

NASA Technical Reports Server (NTRS)

1977-01-01

An architect-engineering firm, as well as university participants, performed system studies, evaluated construction methods, performed cost effectiveness studies, and prepared construction drawings which incorporated the selected technology features into a final design. A Technology Utilization House (Tech House) based on this design was constructed at the NASA Langley Research Center in Hampton, Virginia. The Tech House is instrumented so that the performance of the design features and energy systems can be evaluated during a planned family live-in period. As such, the house is both a demonstration unit and a research laboratory. The Tech House is to demonstrate the kind of single-family residence that will probably be available within the next five years.

Structural DNA nanotechnology: from design to applications.

PubMed

Zadegan, Reza M; Norton, Michael L

2012-01-01

The exploitation of DNA for the production of nanoscale architectures presents a young yet paradigm breaking approach, which addresses many of the barriers to the self-assembly of small molecules into highly-ordered nanostructures via construct addressability. There are two major methods to construct DNA nanostructures, and in the current review we will discuss the principles and some examples of applications of both the tile-based and DNA origami methods. The tile-based approach is an older method that provides a good tool to construct small and simple structures, usually with multiply repeated domains. In contrast, the origami method, at this time, would appear to be more appropriate for the construction of bigger, more sophisticated and exactly defined structures.

Design and baseline data from the Gratitude Research in Acute Coronary Events (GRACE) study

PubMed Central

Huffman, Jeff C.; Beale, Eleanor E.; Beach, Scott R.; Celano, Christopher M.; Belcher, Arianna M.; Moore, Shannon V.; Suarez, Laura; Gandhi, Parul U.; Motiwala, Shweta R.; Gaggin, Hanna; Januzzi, James L.

2015-01-01

Background Positive psychological constructs, especially optimism, have been linked with superior cardiovascular health. However, there has been minimal study of positive constructs in patients with acute coronary syndrome (ACS), despite the prevalence and importance of this condition. Furthermore, few studies have examined multiple positive psychological constructs and multiple cardiac-related outcomes within the same cohort to determine specifically which positive construct may affect a particular cardiac outcome. Materials and methods The Gratitude Research in Acute Coronary Events (GRACE) study examines the association between optimism/gratitude 2 weeks post-ACS and subsequent clinical outcomes. The primary outcome measure is physical activity at 6 months, measured via accelerometer, and key secondary outcome measures include levels of prognostic biomarkers and rates of nonelective cardiac rehospitalization at 6 months. These relationships will be analyzed using multivariate linear regression, controlling for sociodemographic, medical, and negative psychological factors; associations between baseline positive constructs and subsequent rehospitalizations will be assessed via Cox regression. Results Overall, 164 participants enrolled and completed the baseline 2-week assessment; the cohort had a mean age of 61.5 +/− 10.5 years and was 84% men; this was the first ACS for 58% of participants. Conclusion The GRACE study will determine whether optimism and gratitude are prospectively and independently associated with physical activity and other critical outcomes in the 6 months following an ACS. If these constructs are associated with superior outcomes, this may highlight the importance of these constructs as independent prognostic factors post-ACS. PMID:26166171

[An alternative continence mechanism for continent catheterisable micturation].

PubMed

Honeck, P; Alken, P

2010-01-01

The creation of a stable, reliable, continent and easily catheterisable continence mechanism is an essential prerequisite for the construction of a continent cutaneous urinary reservoir. Although a substantial number of surgical methods has been described, construction is still a complex surgical procedure. The aim of this study was the evaluation of a new method for a continence mechanism using stapled small or large intestine. Small and large pig intestine was used for construction. For stapling the tube a 3 cm or 6 cm double row stapling system was used. Two variations using small and large intestine segments were constructed (IL 1, COL 1, COL 2). A 3 or 6 cm long stapler line was placed alongside a 12 Fr catheter positioned at the antimesenterial side creating a partially two-luminal segment. The open end of the non-catheterised lumen and the opposite intestinal end were closed by continuous sutures. The created tube was then embedded into the pouch. Pressure evaluation was performed for each variation. Intermittent external manual compression was used to simulate sudden pressure exposure. Construction times for the IL 1 and COL 1 variations were 10 +/- 1.5 min and 6.2 +/- 1.3 min for COL 2. All variations showed no leakage during filling or external compression. The maximum capacity was lower for the IL 1 compared to the COL variation. The maximum pressure levels reached did not differ significantly. The described technique is an easy and fast method to construct a continent and easy to catheterize continence mechanism using small or large intestine.

Efficiency of two constructs called "fear of disease" and "perceived severity of disease" on the prevention of gastric cancer: Application of protection motivation theory

PubMed Central

Baghiani- Moghadam, Mohamad Hosein; Seyedi-Andi, Seyed Jalil; Shokri-Shirvani, Javad; Khafri, Sorayya; Ghadimi, Reza; Parsian, Hadi

2015-01-01

Background: Among all cancers, malignancies of gastrointestinal tract are the most common cancer among Iranian population. Dietary behavior is thought to be the most important risk factor in gastric cancer. Fear and perceived severity are two important constructs of the protection motivation theory (PMT). Despite the evidence of the impact of these two constructs in modifying dietary habits against gastric cancer, their efficiency is not well established. Therefore, the present study was designed to determine the efficiency of the mentioned constructs. Methods: This cross-sectional study was performed on 360 participants (180 males and 180 females) aged over 30 years old who presented to health centers in Babol, Iran in 2014. They were selected by a cluster sampling method in a population covered by health centers in Babol. Data collection was done using a questionnaire with acceptable reliability and validity, designed by a researcher based on two constructs of protection motivation theory. The data were analyzed by SPSS Version 20 using descriptive and analytical statistics such as ANOVA, linear and logistic regression analysis. Results: The participants who entered in the study achieved 38.6 and 69.7% of the scores of fear and perceived severity, respectively. There was a significant difference between perceived severity with level of education (p<0.05). There was a significant inverse correlation between perceived severity with nutritional high risk behavior associated with gastric cancer in the significant level of 0.05 (r=-0.165). The constructs of perceived severity and fear predicted 38% of the variance of nutritional high risk behaviors associated with gastric cancer. Conclusion: Constructs of fear and perceived severity of protection motivation theory with predicting 38% of the variance of nutritional high risk behaviors had an effective role against gastric cancer and may help in the design and implementation of educational programs for the prevention of gastric cancer. PMID:26644893

Construction of Response Surface with Higher Order Continuity and Its Application to Reliability Engineering

NASA Technical Reports Server (NTRS)

Krishnamurthy, T.; Romero, V. J.

2002-01-01

The usefulness of piecewise polynomials with C1 and C2 derivative continuity for response surface construction method is examined. A Moving Least Squares (MLS) method is developed and compared with four other interpolation methods, including kriging. First the selected methods are applied and compared with one another in a two-design variables problem with a known theoretical response function. Next the methods are tested in a four-design variables problem from a reliability-based design application. In general the piecewise polynomial with higher order derivative continuity methods produce less error in the response prediction. The MLS method was found to be superior for response surface construction among the methods evaluated.

Formative Assessment and Increased Student Involvement Increase Grades in an Upper Secondary School Biology Course

ERIC Educational Resources Information Center

Granbom, Martin

2016-01-01

This study shows that formative methods and increased student participation has a positive influence on learning measured as grades. The study was conducted during the course Biology A in a Swedish Upper Secondary School. The students constructed grade criteria and defined working methods and type of examination within a given topic, Gene…

Examining Graduate Dissertations in the Field of Critical Thinking: A Case from Turkey

ERIC Educational Resources Information Center

Demirel, Melek; Derman, Ipek; Can Aran, Ozge

2017-01-01

Purpose: The aim of this study is to conduct content analyses of graduate dissertations about critical thinking skills in the field of educational sciences in Turkey and to document general trends in dissertations. Research Methods: This study is constructed using qualitative research methods and techniques. A document review was used to gather…

Investigating Invariant Item Ordering in Personality and Clinical Scales: Some Empirical Findings and a Discussion

ERIC Educational Resources Information Center

Meijer, Rob R.; Egberink, Iris J. L.

2012-01-01

In recent studies, different methods were proposed to investigate invariant item ordering (IIO), but practical IIO research is an unexploited field in questionnaire construction and evaluation. In the present study, the authors explored the usefulness of different IIO methods to analyze personality scales and clinical scales. From the authors'…

Algorithms for the Construction of Parallel Tests by Zero-One Programming. Project Psychometric Aspects of Item Banking No. 7. Research Report 86-7.

ERIC Educational Resources Information Center

Boekkooi-Timminga, Ellen

Nine methods for automated test construction are described. All are based on the concepts of information from item response theory. Two general kinds of methods for the construction of parallel tests are presented: (1) sequential test design; and (2) simultaneous test design. Sequential design implies that the tests are constructed one after the…

Research on construction technology for orthotropic steel deck pavement of Haihe River Chunyi Bridge

NASA Astrophysics Data System (ADS)

Xue, Y. C.; Qian, Z. D.; Zhang, M.

2017-01-01

In order to ensure the good service quality of orthotropic steel deck pavement of Haihe River Chunyi Bridge in Tianjin, and to reduce the occurrence of pavement diseases like lateral and longitudinal cracks, the key working procedures such as steel deck cleaning, anticorrosive coating, bonding layer spraying, seam cutting, epoxy asphalt concrete’s mixing, transportation, paving and compaction were studied. The study was based on the main features of epoxy asphalt concrete which is the pavement materials of Haihe River Chunyi Bridge, and combined with the basic characteristics and construction conditions of Haihe River Chunyi Bridge. Furthermore, some processing measures like controlling time and temperature, continuous paving with two pavers, lateral feeding, and improving the compaction method were proposed. The project example shows that the processing measures can effectively solve the technical difficulties in the construction of orthotropic steel deck pavement of Haihe River Chunyi Bridge, can greatly improve the construction speed and quality, and can provide reference for the same kinds of orthotropic steel deck pavement construction.

Implementation of building information modeling in Malaysian construction industry

NASA Astrophysics Data System (ADS)

Memon, Aftab Hameed; Rahman, Ismail Abdul; Harman, Nur Melly Edora

2014-10-01

This study has assessed the implementation level of Building Information Modeling (BIM) in the construction industry of Malaysia. It also investigated several computer software packages facilitating BIM and challenges affecting its implementation. Data collection for this study was carried out using questionnaire survey among the construction practitioners. 95 completed forms of questionnaire received against 150 distributed questionnaire sets from consultant, contractor and client organizations were analyzed statistically. Analysis findings indicated that the level of implementation of BIM in the construction industry of Malaysia is very low. Average index method employed to assess the effectiveness of various software packages of BIM highlighted that Bentley construction, AutoCAD and ArchiCAD are three most popular and effective software packages. Major challenges to BIM implementation are it requires enhanced collaboration, add work to a designer, interoperability and needs enhanced collaboration. For improving the level of implementing BIM in Malaysian industry, it is recommended that a flexible training program of BIM for all practitioners must be created.

Construction demolition wastes, Waelz slag and MSWI bottom ash: a comparative technical analysis as material for road construction.

PubMed

Vegas, I; Ibañez, J A; San José, J T; Urzelai, A

2008-01-01

The objective of the study is to analyze the technical suitability of using secondary materials from three waste flows (construction and demolition waste (CDW), Waelz slag and municipal solid waste incineration (MSWI) bottom ash), under the regulations and standards governing the use of materials for road construction. A detailed technical characterization of the materials was carried out according to Spanish General Technical Specifications for Road Construction (PG3). The results show that Waelz slag can be adequate for using in granular structural layers, while CDW fits better as granular material in roadbeds. Likewise, fresh MSWI bottom ash can be used as roadbed material as long as it does not contain a high concentration of soluble salts. This paper also discusses the adequacy of using certain traditional test methods for natural soils when characterizing secondary materials for use as aggregates in road construction.

More than Clocks and Calendars: The Construction of Timekeepers by Eleven Kindergarten Children in Mexico and the United States

ERIC Educational Resources Information Center

Hardin, Belinda J.; Jones, M. Gail; Figueras, Olimpia

2005-01-01

The purpose of this qualitative study was to investigate timekeeping constructs of 4- and 5-year-old children in Campeche, Mexico, and North Carolina, United States, as well as the sociocultural conditions that shaped changes in their ideas about timekeeping (methods to mark and measure time) before, during, and after their kindergarten year.…

Newly invented biobased materials from low-carbon, diverted waste fibers: research methods, testing, and full-scale application in a case study structure

Treesearch

Julee A Herdt; John Hunt; Kellen Schauermann

2016-01-01

This project demonstrates newly invented, biobased construction materials developed by applying lowcarbon, biomass waste sources through the Authors’ engineered fiber processes and technology. If manufactured and applied large-scale the project inventions can divert large volumes of cellulose waste into high-performance, low embodied energy, environmental construction...

A Video Ethnography Approach for Linking Naturalistic Behaviors to Research Constructs of Neurocognition in Schizophrenia

PubMed Central

Bromley, Elizabeth; Adams, Gail Fox; Brekke, John S.

2015-01-01

Few methods are available to explore the impact of neurocognition in schizophrenia on behaviors performed in usual contexts. The authors developed a video ethnography approach to examine the relationship between naturalistic behaviors and research constructs of neurocognition. Video ethnographers accompanied subjects through usual routines gathering continuous video data. Researchers developed codes to measure four behavioral domains observed on video. This paper describes the psychometric characteristics to be considered in the development of observational approaches. It also highlights differences between behaviors performed in usual environments and neuropsychological constructs. The authors demonstrate that everyday behaviors that have been shown to correspond to neurocognitive skills in a pilot feasibility study1 can be identified and rated. They further suggest that observational methods could provide novel strategies for linking research findings and clinical concerns. PMID:22772661

System dynamic modeling: an alternative method for budgeting.

PubMed

Srijariya, Witsanuchai; Riewpaiboon, Arthorn; Chaikledkaew, Usa

2008-03-01

To construct, validate, and simulate a system dynamic financial model and compare it against the conventional method. The study was a cross-sectional analysis of secondary data retrieved from the National Health Security Office (NHSO) in the fiscal year 2004. The sample consisted of all emergency patients who received emergency services outside their registered hospital-catchments area. The dependent variable used was the amount of reimbursed money. Two types of model were constructed, namely, the system dynamic model using the STELLA software and the multiple linear regression model. The outputs of both methods were compared. The study covered 284,716 patients from various levels of providers. The system dynamic model had the capability of producing various types of outputs, for example, financial and graphical analyses. For the regression analysis, statistically significant predictors were composed of service types (outpatient or inpatient), operating procedures, length of stay, illness types (accident or not), hospital characteristics, age, and hospital location (adjusted R(2) = 0.74). The total budget arrived at from using the system dynamic model and regression model was US$12,159,614.38 and US$7,301,217.18, respectively, whereas the actual NHSO reimbursement cost was US$12,840,805.69. The study illustrated that the system dynamic model is a useful financial management tool, although it is not easy to construct. The model is not only more accurate in prediction but is also more capable of analyzing large and complex real-world situations than the conventional method.

THE CRITICAL-PATH METHOD OF CONSTRUCTION CONTROL.

ERIC Educational Resources Information Center

DOMBROW, RODGER T.; MAUCHLY, JOHN

THIS DISCUSSION PRESENTS A DEFINITION AND BRIEF DESCRIPTION OF THE CRITICAL-PATH METHOD AS APPLIED TO BUILDING CONSTRUCTION. INTRODUCING REMARKS CONSIDER THE MOST PERTINENT QUESTIONS PERTAINING TO CPM AND THE NEEDS ASSOCIATED WITH MINIMIZING TIME AND COST ON CONSTRUCTION PROJECTS. SPECIFIC DISCUSSION INCLUDES--(1) ADVANTAGES OF NETWORK TECHNIQUES,…

Creating IRT-Based Parallel Test Forms Using the Genetic Algorithm Method

ERIC Educational Resources Information Center

Sun, Koun-Tem; Chen, Yu-Jen; Tsai, Shu-Yen; Cheng, Chien-Fen

2008-01-01

In educational measurement, the construction of parallel test forms is often a combinatorial optimization problem that involves the time-consuming selection of items to construct tests having approximately the same test information functions (TIFs) and constraints. This article proposes a novel method, genetic algorithm (GA), to construct parallel…

On supervised graph Laplacian embedding CA model & kernel construction and its application

NASA Astrophysics Data System (ADS)

Zeng, Junwei; Qian, Yongsheng; Wang, Min; Yang, Yongzhong

2017-01-01

There are many methods to construct kernel with given data attribute information. Gaussian radial basis function (RBF) kernel is one of the most popular ways to construct a kernel. The key observation is that in real-world data, besides the data attribute information, data label information also exists, which indicates the data class. In order to make use of both data attribute information and data label information, in this work, we propose a supervised kernel construction method. Supervised information from training data is integrated into standard kernel construction process to improve the discriminative property of resulting kernel. A supervised Laplacian embedding cellular automaton model is another key application developed for two-lane heterogeneous traffic flow with the safe distance and large-scale truck. Based on the properties of traffic flow in China, we re-calibrate the cell length, velocity, random slowing mechanism and lane-change conditions and use simulation tests to study the relationships among the speed, density and flux. The numerical results show that the large-scale trucks will have great effects on the traffic flow, which are relevant to the proportion of the large-scale trucks, random slowing rate and the times of the lane space change.

Analyzing key performance indicators (KPIs) for E-commerce and Internet marketing of elderly products: a review.

PubMed

Tsai, Yuan-Cheng; Cheng, Yu-Tien

2012-01-01

With the transformation of its population structure and economic environment, Taiwan is rapidly becoming an aging society. There is a growing need for elderly products, and therefore the operation of web shops that sell elderly products is important. In an era which values performance management, searching for key performance indicators (KPIs) helps to reveal, if the goals of a web shop are achieved. In the current study, researchers adopted the constructs of the Balanced Scorecard (BSC) to evaluate web shop performance. Additionally, the Delphi method, along with questionnaires, was used to develop 29 indicators. Finally, the decision making trial and evaluation laboratory (DEMATEL) method assisted in identifying the level of importance of the constructs, in which "internal process" ranked top, followed by "learning and growth", "customer", and "financial". "Internal process" was the key construct that impacted other factors, while "customer" was an important construct affected by other factors. By understanding the influences and relationships among the constructs, enterprises can conduct additional monitoring and management to achieve functions of prevention, continuous improvement, and innovation in order to shape their core competence. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

TANK OPERATIONS CONTRACT CONSTRUCTION MANAGEMENT METHODOLOGY UTILIZING THE AGENCY METHOD OF CONSTRUCTION MANAGEMENT TO SAFELY AND EFFECTIVELY COMPLETE NUCLEAR CONSTRUCTION WORK

DOE Office of Scientific and Technical Information (OSTI.GOV)

LESO KF; HAMILTON HM; FARNER M

Washington River Protection Solutions, LLC (WRPS) has faced significant project management challenges in managing Davis-Bacon construction work that meets contractually required small business goals. The unique challenge is to provide contracting opportunities to multiple small business construction subcontractors while performing high hazard work in a safe and productive manner. Previous to the Washington River Protection Solutions, LLC contract, Construction work at the Hanford Tank Farms was contracted to large companies, while current Department of Energy (DOE) Contracts typically emphasize small business awards. As an integral part of Nuclear Project Management at Hanford Tank Farms, construction involves removal of old equipmentmore » and structures and installation of new infrastructure to support waste retrieval and waste feed delivery to the Waste Treatment Plant. Utilizing the optimum construction approach ensures that the contractors responsible for this work are successful in meeting safety, quality, cost and schedule objectives while working in a very hazardous environment. This paper describes the successful transition from a traditional project delivery method that utilized a large business general contractor and subcontractors to a new project construction management model that is more oriented to small businesses. Construction has selected the Agency Construction Management Method. This method was implemented in the first quarter of Fiscal Year (FY) 2009, where Construction Management is performed by substantially home office resources from the URS Northwest Office in Richland, Washington. The Agency Method has allowed WRPS to provide proven Construction Managers and Field Leads to mentor and direct small business contractors, thus providing expertise and assurance of a successful project. Construction execution contracts are subcontracted directly by WRPS to small or disadvantaged contractors that are mentored and supported by DRS personnel. Each small contractor is mentored and supported utilizing the principles of the Construction Industry Institute (CII) Partnering process. Some of the key mentoring and partnering areas that are explored in this paper are, internal and external safety professional support, subcontractor safety teams and the interface with project and site safety teams, quality assurance program support to facilitate compliance with NQA-1, construction, team roles and responsibilities, work definition for successful fixed price contracts, scheduling and interface with project schedules and cost projection/accruals. The practical application of the CII Partnering principles, with the Construction Management expertise of URS, has led to a highly successful construction model that also meets small business contracting goals.« less

Plethora or paucity: a systematic search and bibliometric study of the application and design of qualitative methods in nursing research 2008-2010.

PubMed

Ball, Elaine; McLoughlin, Moira; Darvill, Angela

2011-04-01

Qualitative methodology has increased in application and acceptability in all research disciplines. In nursing, it is appropriate that a plethora of qualitative methods can be found as nurses pose real-world questions to clinical, cultural and ethical issues of patient care (Johnson, 2007; Long and Johnson, 2007), yet the methods nurses readily use in pursuit of answers remains under intense scrutiny. One of the problems with qualitative methodology for nursing research is its place in the hierarchy of evidence (HOE); another is its comparison to the positivist constructs of what constitutes good research and the measurement of qualitative research against this. In order to position and strengthen its evidence base, nursing may well seek to distance itself from a qualitative perspective and utilise methods at the top of the HOE; yet given the relation of qualitative methods to nursing this would constrain rather than broaden the profession in search of answers and an evidence base. The comparison between qualitative and quantitative can be both mutually exclusive and rhetorical, by shifting the comparison this study takes a more reflexive position and critically appraises qualitative methods against the standards set by qualitative researchers. By comparing the design and application of qualitative methods in nursing over a two year period, the study examined how qualitative stands up to independent rather than comparative scrutiny. For the methods, a four-step mixed methods approach newly constructed by the first author was used to define the scope of the research question and develop inclusion criteria. 2. Synthesis tables were constructed to organise data, 3. Bibliometrics configured data. 4. Studies selected for inclusion in the review were critically appraised using a critical interpretive synthesis (Dixon-Woods et al., 2006). The paper outlines the research process as well as findings. Results showed of the 240 papers analysed, 27% used ad hoc or no references to qualitative; methodological terms such as thematic analysis or constant comparative methods were used inconsistently; qualitative was a catch-all panacea rather than a methodology with well-argued terms or contextual definition. Copyright © 2010 Elsevier Ltd. All rights reserved.

Two-Way Gene Interaction From Microarray Data Based on Correlation Methods

PubMed Central

Alavi Majd, Hamid; Talebi, Atefeh; Gilany, Kambiz; Khayyer, Nasibeh

2016-01-01

Background Gene networks have generated a massive explosion in the development of high-throughput techniques for monitoring various aspects of gene activity. Networks offer a natural way to model interactions between genes, and extracting gene network information from high-throughput genomic data is an important and difficult task. Objectives The purpose of this study is to construct a two-way gene network based on parametric and nonparametric correlation coefficients. The first step in constructing a Gene Co-expression Network is to score all pairs of gene vectors. The second step is to select a score threshold and connect all gene pairs whose scores exceed this value. Materials and Methods In the foundation-application study, we constructed two-way gene networks using nonparametric methods, such as Spearman’s rank correlation coefficient and Blomqvist’s measure, and compared them with Pearson’s correlation coefficient. We surveyed six genes of venous thrombosis disease, made a matrix entry representing the score for the corresponding gene pair, and obtained two-way interactions using Pearson’s correlation, Spearman’s rank correlation, and Blomqvist’s coefficient. Finally, these methods were compared with Cytoscape, based on BIND, and Gene Ontology, based on molecular function visual methods; R software version 3.2 and Bioconductor were used to perform these methods. Results Based on the Pearson and Spearman correlations, the results were the same and were confirmed by Cytoscape and GO visual methods; however, Blomqvist’s coefficient was not confirmed by visual methods. Conclusions Some results of the correlation coefficients are not the same with visualization. The reason may be due to the small number of data. PMID:27621916

Subsurface Exploration Methods for Soft Ground Rapid Transit Tunnels : Volume 2. Appendixes A-F.

DOT National Transportation Integrated Search

1976-04-01

This study assesses subsurface exploration methods with respect to their ability to provide adequate data for the construction of rapid transit, soft-ground bored and cut-and-cover tunnels. Geophysical and other exploration tools not now widely used ...

Constructing a Geology Ontology Using a Relational Database

NASA Astrophysics Data System (ADS)

Hou, W.; Yang, L.; Yin, S.; Ye, J.; Clarke, K.

2013-12-01

In geology community, the creation of a common geology ontology has become a useful means to solve problems of data integration, knowledge transformation and the interoperation of multi-source, heterogeneous and multiple scale geological data. Currently, human-computer interaction methods and relational database-based methods are the primary ontology construction methods. Some human-computer interaction methods such as the Geo-rule based method, the ontology life cycle method and the module design method have been proposed for applied geological ontologies. Essentially, the relational database-based method is a reverse engineering of abstracted semantic information from an existing database. The key is to construct rules for the transformation of database entities into the ontology. Relative to the human-computer interaction method, relational database-based methods can use existing resources and the stated semantic relationships among geological entities. However, two problems challenge the development and application. One is the transformation of multiple inheritances and nested relationships and their representation in an ontology. The other is that most of these methods do not measure the semantic retention of the transformation process. In this study, we focused on constructing a rule set to convert the semantics in a geological database into a geological ontology. According to the relational schema of a geological database, a conversion approach is presented to convert a geological spatial database to an OWL-based geological ontology, which is based on identifying semantics such as entities, relationships, inheritance relationships, nested relationships and cluster relationships. The semantic integrity of the transformation was verified using an inverse mapping process. In a geological ontology, an inheritance and union operations between superclass and subclass were used to present the nested relationship in a geochronology and the multiple inheritances relationship. Based on a Quaternary database of downtown of Foshan city, Guangdong Province, in Southern China, a geological ontology was constructed using the proposed method. To measure the maintenance of semantics in the conversation process and the results, an inverse mapping from the ontology to a relational database was tested based on a proposed conversation rule. The comparison of schema and entities and the reduction of tables between the inverse database and the original database illustrated that the proposed method retains the semantic information well during the conversation process. An application for abstracting sandstone information showed that semantic relationships among concepts in the geological database were successfully reorganized in the constructed ontology. Key words: geological ontology; geological spatial database; multiple inheritance; OWL Acknowledgement: This research is jointly funded by the Specialized Research Fund for the Doctoral Program of Higher Education of China (RFDP) (20100171120001), NSFC (41102207) and the Fundamental Research Funds for the Central Universities (12lgpy19).

Predicting Costs of Eastern National Forest Wildernesses.

ERIC Educational Resources Information Center

Guldin, Richard W.

1981-01-01

A method for estimating the total direct social costs for proposed wilderness areas is presented. A cost framework is constructed and equations are developed for cost components. To illustrate the study's method, social costs are estimated for a proposed wilderness area in New England. (Author/JN)

Differences in health insurance and health service utilization among Asian Americans: method for using the NHIS to identify unique patterns between ethnic groups.

PubMed

Ruy, Hosihn; Young, Wendy B; Kwak, Hoil

2002-01-01

The purpose of this study is to outline a method to identify the characteristics of socioeconomic variables in determining the differences in health insurance coverage and health services utilization patterns for different ethnic groups, using the behavioural model of health service utilization. A sample drawn from Asian American adult respondents to the 1992, 1993, and 1994 National Health Interview Surveys (NHIS) in the USA formed the data set. The results showed Asian Americans as not being homogeneous. There were distinctly different demographic and socioeconomic characteristics between six Asian American ethnic groups that affect health insurance coverage and health service utilization. The study method is useful for constructing health policy and services to address the general public need without adversely affecting smaller minority groups. Secondary analysis of well-constructed national data sets such as the specific Asian ethnic groups in NHIS, offers a rich method for predicting the differential impact of specific health policies on various ethnic groups.

Patient simulation: a literary synthesis of assessment tools in anesthesiology.

PubMed

Edler, Alice A; Fanning, Ruth G; Chen, Michael I; Claure, Rebecca; Almazan, Dondee; Struyk, Brain; Seiden, Samuel C

2009-12-20

High-fidelity patient simulation (HFPS) has been hypothesized as a modality for assessing competency of knowledge and skill in patient simulation, but uniform methods for HFPS performance assessment (PA) have not yet been completely achieved. Anesthesiology as a field founded the HFPS discipline and also leads in its PA. This project reviews the types, quality, and designated purpose of HFPS PA tools in anesthesiology. We used the systematic review method and systematically reviewed anesthesiology literature referenced in PubMed to assess the quality and reliability of available PA tools in HFPS. Of 412 articles identified, 50 met our inclusion criteria. Seventy seven percent of studies have been published since 2000; more recent studies demonstrated higher quality. Investigators reported a variety of test construction and validation methods. The most commonly reported test construction methods included "modified Delphi Techniques" for item selection, reliability measurement using inter-rater agreement, and intra-class correlations between test items or subtests. Modern test theory, in particular generalizability theory, was used in nine (18%) of studies. Test score validity has been addressed in multiple investigations and shown a significant improvement in reporting accuracy. However the assessment of predicative has been low across the majority of studies. Usability and practicality of testing occasions and tools was only anecdotally reported. To more completely comply with the gold standards for PA design, both shared experience of experts and recognition of test construction standards, including reliability and validity measurements, instrument piloting, rater training, and explicit identification of the purpose and proposed use of the assessment tool, are required.

Stochastic response and bifurcation of periodically driven nonlinear oscillators by the generalized cell mapping method

NASA Astrophysics Data System (ADS)

Han, Qun; Xu, Wei; Sun, Jian-Qiao

2016-09-01

The stochastic response of nonlinear oscillators under periodic and Gaussian white noise excitations is studied with the generalized cell mapping based on short-time Gaussian approximation (GCM/STGA) method. The solutions of the transition probability density functions over a small fraction of the period are constructed by the STGA scheme in order to construct the GCM over one complete period. Both the transient and steady-state probability density functions (PDFs) of a smooth and discontinuous (SD) oscillator are computed to illustrate the application of the method. The accuracy of the results is verified by direct Monte Carlo simulations. The transient responses show the evolution of the PDFs from being Gaussian to non-Gaussian. The effect of a chaotic saddle on the stochastic response is also studied. The stochastic P-bifurcation in terms of the steady-state PDFs occurs with the decrease of the smoothness parameter, which corresponds to the deterministic pitchfork bifurcation.

Peculiarities of organizing the construction of nuclear medicine facilities and the transportation of radionuclide

NASA Astrophysics Data System (ADS)

Telichenko, Valeriy; Malykha, Galina; Dorogan, Igor

2017-10-01

The article is devoted to the organization of construction of nuclear medicine facilities in Russia. The article describes the main methods of nuclear medical diagnostics, as well as the peculiarities of nuclear medicine facilities that determine the need for application of specific methods for organizing and managing the construction, methods of requirements management in the organization of construction of nuclear medicine facilities. Sustainable development of the transport of radioactive isotopes from the place of production to places of consumption is very important for the safety of the population. The requirements management system is an important and necessary component in organizing the construction of complex facilities, such as nuclear medicine facilities. The author developed and proposed a requirements management system for the design, construction and operation of a nuclear medicine facility, which provides for a cyclic sequence of actions. This system allows reducing the consumption of resources including material and energy during construction and operation of complex objects.

Orbital construction demonstration study

NASA Technical Reports Server (NTRS)

1976-01-01

A conceptual design and program plan for an Orbital Construction Demonstration Article (OCDA) was developed that can be used for evaluating and establishing practical large structural assembly operations. A flight plan for initial placement and continued utility is presented as a basic for an entirely new shuttle payload line-item having great future potential benefit for space applications. The OCDA is a three-axis stabilized platform in low-earth orbit with many structural nodals for mounting large construction and fabrication equipments. This equipment would be used to explore methods for constructing the large structures for future missions. The OCDA would be supported at regular intervals by the shuttle. Construction experiments and consumables resupply are performed during shuttle visit periods. A 250 kw solar array provides sufficient power to support the shuttle while attached to the OCDA and to run construction experiments at the same time. Wide band communications with a Telemetry and Data Relay Satellite compatible high gain antenna can be used between shuttle revisits to perform remote controlled, TV assisted construction experiments.

Non-Viral Transfection Methods Optimized for Gene Delivery to a Lung Cancer Cell Line

PubMed Central

Salimzadeh, Loghman; Jaberipour, Mansooreh; Hosseini, Ahmad; Ghaderi, Abbas

2013-01-01

Background Mehr-80 is a newly established adherent human large cell lung cancer cell line that has not been transfected until now. This study aims to define the optimal transfection conditions and effects of some critical elements for enhancing gene delivery to this cell line by utilizing different non-viral transfection Procedures. Methods In the current study, calcium phosphate (CaP), DEAE-dextran, superfect, electroporation and lipofection transfection methods were used to optimize delivery of a plasmid construct that expressed Green Fluorescent Protein (GFP). Transgene expression was detected by fluorescent microscopy and flowcytometry. Toxicities of the methods were estimated by trypan blue staining. In order to evaluate the density of the transfected gene, we used a plasmid construct that expressed the Stromal cell-Derived Factor-1 (SDF-1) gene and measured its expression by real-time PCR. Results Mean levels of GFP-expressing cells 48 hr after transfection were 8.4% (CaP), 8.2% (DEAE-dextran), 4.9% (superfect), 34.1% (electroporation), and 40.1% (lipofection). Lipofection had the highest intense SDF-1 expression of the analyzed methods. Conclusion This study has shown that the lipofection and electroporation methods were more efficient at gene delivery to Mehr-80 cells. The quantity of DNA per transfection, reagent concentration, and incubation time were identified as essential factors for successful transfection in all of the studied methods. PMID:23799175

Assessing Primary Representational System (PRS) Preference for Neurolinguistic Programming (NLP) Using Three Methods.

ERIC Educational Resources Information Center

Dorn, Fred J.

1983-01-01

Considered three methods of identifying Primary Representational System (PRS)--an interview, a word list, and a self-report--in a study of 120 college students. Results suggested the three methods offer little to counselors either collectively or individually. Results did not validate the PRS construct, suggesting the need for further research.…

Home Brew Salinity Measuring Devices: Their Construction and Use.

ERIC Educational Resources Information Center

Schlenker, Richard M.

This paper discusses several inexpensive methods of evaluating the salinity of seawater. One method is presented in some detail. This method has several attractive features. First, it can be used to provide instruction, not only in marine chemistry, but also in studying the mathematics of the point slope formula, and as an aid in teaching students…

A Comparison of Height-Accumulation and Volume-Equation Methods for Estimating Tree and Stand Volumes

Treesearch

R.B. Ferguson; V. Clark Baldwin

1995-01-01

Estimating tree and stand volume in mature plantations is time consuming, involving much manpower and equipment; however, several sampling and volume-prediction techniques are available. This study showed that a well-constructed, volume-equation method yields estimates comparable to those of the often more time-consuming, height-accumulation method, even though the...

NUMERICAL ANALYSIS TECHNIQUE USING THE STATISTICAL ENERGY ANALYSIS METHOD CONCERNING THE BLASTING NOISE REDUCTION BY THE SOUND INSULATION DOOR USED IN TUNNEL CONSTRUCTIONS

NASA Astrophysics Data System (ADS)

Ishida, Shigeki; Mori, Atsuo; Shinji, Masato

The main method to reduce the blasting charge noise which occurs in a tunnel under construction is to install the sound insulation door in the tunnel. However, the numerical analysis technique to predict the accurate effect of the transmission loss in the sound insulation door is not established. In this study, we measured the blasting charge noise and the vibration of the sound insulation door in the tunnel with the blasting charge, and performed analysis and modified acoustic feature. In addition, we reproduced the noise reduction effect of the sound insulation door by statistical energy analysis method and confirmed that numerical simulation is possible by this procedure.

Developments in variational methods for high performance plate and shell elements

NASA Technical Reports Server (NTRS)

Felippa, Carlos A.; Militello, Carmelo

1991-01-01

High performance elements are simple finite elements constructed to deliver engineering accuracy with coarse arbitrary grids. This is part of a series on the variational foundations of high-performance elements, with emphasis on plate and shell elements constructed with the free formulation (FF) and assumed natural strain (ANS) methods. Parameterized variational principles are studied that provide a common foundation for the FF and ANS methods, as well as for a combination of both. From this unified formulation a variant of the ANS formulation, called the assumed natural deviatoric strain (ANDES) formulation, emerges as an important special case. The first ANDES element, a high-performance 9 degrees of freedom triangular Kirchhoff plate bending element, is briefly described to illustrate the use of the new formulation.

Single-step methods for predicting orbital motion considering its periodic components

NASA Astrophysics Data System (ADS)

Lavrov, K. N.

1989-01-01

Modern numerical methods for integration of ordinary differential equations can provide accurate and universal solutions to celestial mechanics problems. The implicit single sequence algorithms of Everhart and multiple step computational schemes using a priori information on periodic components can be combined to construct implicit single sequence algorithms which combine their advantages. The construction and analysis of the properties of such algorithms are studied, utilizing trigonometric approximation of the solutions of differential equations containing periodic components. The algorithms require 10 percent more machine memory than the Everhart algorithms, but are twice as fast, and yield short term predictions valid for five to ten orbits with good accuracy and five to six times faster than algorithms using other methods.

LoCoH: Non-parameteric kernel methods for constructing home ranges and utilization distributions

USGS Publications Warehouse

Getz, Wayne M.; Fortmann-Roe, Scott; Cross, Paul C.; Lyons, Andrew J.; Ryan, Sadie J.; Wilmers, Christopher C.

2007-01-01

Parametric kernel methods currently dominate the literature regarding the construction of animal home ranges (HRs) and utilization distributions (UDs). These methods frequently fail to capture the kinds of hard boundaries common to many natural systems. Recently a local convex hull (LoCoH) nonparametric kernel method, which generalizes the minimum convex polygon (MCP) method, was shown to be more appropriate than parametric kernel methods for constructing HRs and UDs, because of its ability to identify hard boundaries (e.g., rivers, cliff edges) and convergence to the true distribution as sample size increases. Here we extend the LoCoH in two ways: ‘‘fixed sphere-of-influence,’’ or r -LoCoH (kernels constructed from all points within a fixed radius r of each reference point), and an ‘‘adaptive sphere-of-influence,’’ or a -LoCoH (kernels constructed from all points within a radius a such that the distances of all points within the radius to the reference point sum to a value less than or equal to a ), and compare them to the original ‘‘fixed-number-of-points,’’ or k -LoCoH (all kernels constructed from k -1 nearest neighbors of root points). We also compare these nonparametric LoCoH to parametric kernel methods using manufactured data and data collected from GPS collars on African buffalo in the Kruger National Park, South Africa. Our results demonstrate that LoCoH methods are superior to parametric kernel methods in estimating areas used by animals, excluding unused areas (holes) and, generally, in constructing UDs and HRs arising from the movement of animals influenced by hard boundaries and irregular structures (e.g., rocky outcrops). We also demonstrate that a -LoCoH is generally superior to k - and r -LoCoH (with software for all three methods available at http://locoh.cnr.berkeley.edu).

Single Day Construction of Multigene Circuits with 3G Assembly.

PubMed

Halleran, Andrew D; Swaminathan, Anandh; Murray, Richard M

2018-05-18

The ability to rapidly design, build, and test prototypes is of key importance to every engineering discipline. DNA assembly often serves as a rate limiting step of the prototyping cycle for synthetic biology. Recently developed DNA assembly methods such as isothermal assembly and type IIS restriction enzyme systems take different approaches to accelerate DNA construction. We introduce a hybrid method, Golden Gate-Gibson (3G), that takes advantage of modular part libraries introduced by type IIS restriction enzyme systems and isothermal assembly's ability to build large DNA constructs in single pot reactions. Our method is highly efficient and rapid, facilitating construction of entire multigene circuits in a single day. Additionally, 3G allows generation of variant libraries enabling efficient screening of different possible circuit constructions. We characterize the efficiency and accuracy of 3G assembly for various construct sizes, and demonstrate 3G by characterizing variants of an inducible cell-lysis circuit.

A Study of Shuttlecock's Trajectory in Badminton.

PubMed

Chen, Lung-Ming; Pan, Yi-Hsiang; Chen, Yung-Jen

2009-01-01

The main purpose of this study was to construct and validate a motion equation for the flight of the badminton and to find the relationship between the air resistance force and a shuttlecock's speed. This research method was based on motion laws of aerodynamics. It applied aerodynamic theories to construct motion equation of a shuttlecock's flying trajectory under the effects of gravitational force and air resistance force. The result showed that the motion equation of a shuttlecock's flight trajectory could be constructed by determining the terminal velocity. The predicted shuttlecock trajectory fitted the measured data fairly well. The results also revealed that the drag force was proportional to the square of a shuttlecock velocity. Furthermore, the angle and strength of a stroke could influence trajectory. Finally, this study suggested that we could use a scientific approach to measure a shuttlecock's velocity objectively when testing the quality of shuttlecocks. And could be used to replace the traditional subjective method of the Badminton World Federation based on players' striking shuttlecocks, as well as applying research findings to improve professional knowledge of badminton player training. Key pointsThe motion equation of a shuttlecock's flying trajectory could be constructed by determining the terminal velocity in aerodynamics.Air drag force is proportional to the square of a shuttlecock velocity. Furthermore, the angle and strength of a stroke could influence trajectory.

An Embedded Sensory System for Worker Safety: Prototype Development and Evaluation

PubMed Central

Cho, Chunhee; Park, JeeWoong

2018-01-01

At a construction site, workers mainly rely on two senses, which are sight and sound, in order to perceive their physical surroundings. However, they are often hindered by the nature of most construction sites, which are usually dynamic, loud, and complicated. To overcome these challenges, this research explored a method using an embedded sensory system that might offer construction workers an artificial sensing ability to better perceive their surroundings. This study identified three parameters (i.e., intensity, signal length, and delay between consecutive pulses) needed for tactile-based signals for the construction workers to communicate quickly. We developed a prototype system based on these parameters, conducted experimental studies to quantify and validate the sensitivity of the parameters for quick communication, and analyzed test data to reveal what was added by this method in order to perceive information from the tactile signals. The findings disclosed that the parameters of tactile-based signals and their distinguishable ranges could be perceived in a short amount of time (i.e., a fraction of a second). Further experimentation demonstrated the capability of the identified unit signals combined with a signal mapping technique to effectively deliver simple information to individuals and offer an additional sense of awareness to the surroundings. The findings of this study could serve as a basis for future research in exploring advanced tactile-based messages to overcome challenges in environments for which communication is a struggle. PMID:29662008

An Embedded Sensory System for Worker Safety: Prototype Development and Evaluation.

PubMed

Cho, Chunhee; Park, JeeWoong

2018-04-14

At a construction site, workers mainly rely on two senses, which are sight and sound, in order to perceive their physical surroundings. However, they are often hindered by the nature of most construction sites, which are usually dynamic, loud, and complicated. To overcome these challenges, this research explored a method using an embedded sensory system that might offer construction workers an artificial sensing ability to better perceive their surroundings. This study identified three parameters (i.e., intensity, signal length, and delay between consecutive pulses) needed for tactile-based signals for the construction workers to communicate quickly. We developed a prototype system based on these parameters, conducted experimental studies to quantify and validate the sensitivity of the parameters for quick communication, and analyzed test data to reveal what was added by this method in order to perceive information from the tactile signals. The findings disclosed that the parameters of tactile-based signals and their distinguishable ranges could be perceived in a short amount of time (i.e., a fraction of a second). Further experimentation demonstrated the capability of the identified unit signals combined with a signal mapping technique to effectively deliver simple information to individuals and offer an additional sense of awareness to the surroundings. The findings of this study could serve as a basis for future research in exploring advanced tactile-based messages to overcome challenges in environments for which communication is a struggle.

[Study on diversity of protein between Houttuynia cordata plant].

PubMed

Zhang, Xi-li; He, Fu-yuan; Wang, Hai-qin; Yang, Yan-tao; Shi, Ji-lian; Liu, Wen-long; Li, Shun-xiang

2013-12-01

To reveal protein diversity between the same batch of fresh Houttuynia cordata in the same GAP base,and to lay the foundation construction for "node metabolic network". Three methods including the Ramagli improved Bradford law, SDS-PAGE gel electrophoresis method and double wavelength thin-layer scanning method were used to study the total protein content diversity, protein species diversity and various kinds of content variability. The molecular weight of 53 plant protein mostly concentrated in the range of 6.5-97.2 kDa, the species diversity was not obvious with main performance for banding color shades; The RSD of zero moment (AUCT), first moment (MCRTT) and second moment (VCRTT) in protein electrophoresis banding was 40.92%, 6.01% and 18.57%, respectively. There is rich diversity in different Houttuynia cordata plant in the same GAP base, which provides basis for the foundation of subsequent key protease search, "node metabolic network" construction, and study on the Chinese medicine quality stability.

Construction of a Transcription Map for Papillomaviruses using RACE, RNAse Protection and Primer Extension Assays

PubMed Central

Wang, Xiaohong; Zheng, Zhi-Ming

2016-01-01

Papillomaviruses are a family of small, non-enveloped DNA tumor viruses. Knowing a complete transcription map from each papillomavirus genome can provide guidance for various papillomavirus studies. This unit provides detailed protocols to construct a transcription map of human papillomavirus type 18. The same approach can be easily adapted to other transcription map studies of any other papillomavirus genotype due to the high degree of conservation in the genome structure, organization and gene expression among papillomaviruses. The focused methods are 5’- and 3’- rapid amplification of cDNA ends (RACE), which are the techniques commonly used in molecular biology to obtain the full length RNA transcript or to map a transcription start site (TSS) or an RNA polyadenylation (pA) cleavage site. Primer walking RT-PCR is a method for studying splicing junction of RACE products. In addition, RNase protection assay and primer extension are also introduced as alternative methods in the mapping analysis. PMID:26855281

Investigation of New Materials and Methods of Construction of Personnel Armor

DTIC Science & Technology

2008-12-01

NEW MATERIALS AND METHODS OF CONSTRUCTION OF PERSONNEL ARMOR by Poh, Choon Wei December 2008 Thesis Advisor: Robert S. Hixson Second...REPORT TYPE AND DATES COVERED Master’s Thesis 4. TITLE AND SUBTITLE Investigation of New Materials and Methods of Construction of Personnel Armor 6...personnel and vehicle armor. However, much of this work has focused on finding materials that were very ‘strong’ to resist penetration of objects moving

23 CFR 660.113 - Construction.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Construction. 660.113 Section 660.113 Highways FEDERAL... (DIRECT FEDERAL) Forest Highways § 660.113 Construction. (a) No construction shall be undertaken on any FH... construction of FHs will be performed by the contract method, unless construction by the FHWA, the FS, or a...

23 CFR 660.113 - Construction.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 23 Highways 1 2014-04-01 2014-04-01 false Construction. 660.113 Section 660.113 Highways FEDERAL... (DIRECT FEDERAL) Forest Highways § 660.113 Construction. (a) No construction shall be undertaken on any FH... construction of FHs will be performed by the contract method, unless construction by the FHWA, the FS, or a...

23 CFR 660.113 - Construction.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 23 Highways 1 2012-04-01 2012-04-01 false Construction. 660.113 Section 660.113 Highways FEDERAL... (DIRECT FEDERAL) Forest Highways § 660.113 Construction. (a) No construction shall be undertaken on any FH... construction of FHs will be performed by the contract method, unless construction by the FHWA, the FS, or a...

23 CFR 660.113 - Construction.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 23 Highways 1 2013-04-01 2013-04-01 false Construction. 660.113 Section 660.113 Highways FEDERAL... (DIRECT FEDERAL) Forest Highways § 660.113 Construction. (a) No construction shall be undertaken on any FH... construction of FHs will be performed by the contract method, unless construction by the FHWA, the FS, or a...

23 CFR 660.113 - Construction.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false Construction. 660.113 Section 660.113 Highways FEDERAL... (DIRECT FEDERAL) Forest Highways § 660.113 Construction. (a) No construction shall be undertaken on any FH... construction of FHs will be performed by the contract method, unless construction by the FHWA, the FS, or a...

TANK OPERATIONS CONTRACT CONSTRUCTION MANAGEMENT METHODOLOGY UTILIZING THE AGENCY METHOD OF CONSTRUCTION MANAGEMENT

DOE Office of Scientific and Technical Information (OSTI.GOV)

LESKO KF; BERRIOCHOA MV

2010-02-26

Washington River Protection Solutions, LLC (WRPS) has faced significant project management challenges in managing Davis-Bacon construction work that meets contractually required small business goals. The unique challenge is to provide contracting opportunities to multiple small business constructioin subcontractors while performing high hazard work in a safe and productive manner. Previous to the WRPS contract, construction work at the Hanford Tank Farms was contracted to large companies, while current Department of Energy (DOE) Contracts typically emphasize small business awards. As an integral part of Nuclear Project Management at Hanford Tank Farms, construction involves removal of old equipment and structures and installationmore » of new infrastructure to support waste retrieval and waste feed delivery to the Waste Treatment Plant. Utilizing the optimum construction approach ensures that the contractors responsible for this work are successful in meeting safety, quality, cost and schedule objectives while working in a very hazardous environment. This paper descirbes the successful transition from a traditional project delivery method that utilized a large business general contractor and subcontractors to a new project construction management model that is more oriented to small businesses. Construction has selected the Agency Construction Management Method (John E Schaufelberger, Len Holm, "Management of Construction Projects, A Constructor's Perspective", University of Washington, Prentice Hall 2002). This method was implemented in the first quarter of Fiscal Year 2009 (FY2009), where Construction Management is performed by substantially home office resources from the URS Northwest Office in Richland, Washington. The Agency Method has allowed WRPS to provide proven Construction Managers and Field Leads to mentor and direct small business contractors, thus providing expertise and assurance of a successful project. Construction execution contracts are subcontracted directly by WRPS to small or disadvantaged contractors that are mentored and supported by URS personnel. Each small contractor is mentored and supported utilizing the principles of the Construction Industry Institute (CII) Partnering process. Some of the key mentoring and partnering areas that are explored in this paper are, internal and external safety professional support, subcontractor safety teams and the interface with project and site safety teams, quality assurance program support to facilitate compliance with NQA-1, construction, team roles and responsibilities, work definition for successful fixed price contracts, scheduling and interface with project schedules and cost projection/accruals. The practical application of the CII Partnering principles, with the Construction Management expertise of URS, has led to a highly successful construction model that also meets small business contracting goals.« less

Structural DNA Nanotechnology: From Design to Applications

PubMed Central

Zadegan, Reza M.; Norton, Michael L.

2012-01-01

The exploitation of DNA for the production of nanoscale architectures presents a young yet paradigm breaking approach, which addresses many of the barriers to the self-assembly of small molecules into highly-ordered nanostructures via construct addressability. There are two major methods to construct DNA nanostructures, and in the current review we will discuss the principles and some examples of applications of both the tile-based and DNA origami methods. The tile-based approach is an older method that provides a good tool to construct small and simple structures, usually with multiply repeated domains. In contrast, the origami method, at this time, would appear to be more appropriate for the construction of bigger, more sophisticated and exactly defined structures. PMID:22837684

A worksite prevention program for construction workers: design of a randomized controlled trial

PubMed Central

2010-01-01

Background A worksite prevention program was developed to promote the work ability of construction workers and thereby prolong a healthy working life. The objective of this paper is to present the design of a randomized controlled trial evaluating the effectiveness of that intervention program compared with usual care for construction workers. Methods The study is designed as a randomized controlled trial with a follow-up of one year. Employees eligible for this study are construction workers performing actual construction work. The worksite intervention will be compared with usual care. This intervention was developed by using the Intervention Mapping approach and consists of the following components: (1) two individual training sessions of a physical therapist to lower the physical workload, (2) a Rest-Break tool to improve the balance between work and recovery, and (3) two empowerment training sessions to increase the influence of the construction workers at the worksite. Outcome measures are assessed at baseline, 3, 6, and 12 months. The primary outcome measures of this study are work ability and health-related quality of life. Secondary outcome measures include need for recovery, musculoskeletal complaints, work engagement and self efficacy. Cost-effectiveness will be evaluated from the company perspective. Moreover, a process evaluation will be conducted. Discussion The feasibility of the intervention and the study has been enhanced by creating an intervention program that explicitly appeals to construction workers and will not interfere too much with the ongoing construction. The feasibility and effectiveness of this worksite prevention program will be investigated by means of an effect- and a process evaluation. If proven effective, this worksite prevention program can be implemented on a larger scale within the construction industry. Trial Registration NTR1278 PMID:20546568

Constructive and destructive marital conflict, emotional security and children's prosocial behavior

PubMed Central

McCoy, Kathleen; Cummings, E. Mark; Davies, Patrick T.

2010-01-01

Background This study addresses the gaps in understanding the relationship between constructive and destructive marital conflict and children's prosocial behavior from a process-oriented perspective. Method Data were drawn from a three-wave study of 235 families with children ages 5–7 at wave 1. Relations between constructive and destructive marital conflict, children's emotional security, warm parenting and children's prosocial behavior were examined through the use of structural equation modeling. Results Even after controlling for prior levels of children's prosocial behavior at wave 1, children's emotional security acted as an intervening variable between both constructive and destructive marital conflict and children's prosocial behavior over time. Conclusions These findings advance the relationship between marital conflict and children's adjustment by focusing on children's prosocial behavior and highlight the need to further investigate the impact of positive dimensions of marital conflict on dimensions of children's positive social functioning. PMID:18673403

Health Promotion at the Construction Work Site: The Lunch Truck Pilot Study.

PubMed

Caban-Martinez, Alberto J; Moore, Kevin J; Clarke, Tainya C; Davila, Evelyn P; Clark, John D; Lee, David J; Fleming, Lora E

2018-04-01

The transient nature of construction work makes it difficult to conduct longitudinal worksite-based health promotion activities. As part of a workplace health assessment pilot study, we worked with a commercial lunch truck company to disseminate four types of health education materials including cancer screening, workplace injury prevention, fruit and vegetable consumption, and smoking cessation to construction workers purchasing food items from the truck during their job breaks. Two weeks following the worksite assessment, we followed up with these workers to ascertain their use of the health promotion materials. Of the 54 workers surveyed, 83% reported reviewing and sharing the cancer screening materials with their families, whereas 44% discussed the cancer screening materials with coworkers. Similar proportions of workers reviewed, shared, and discussed the other health promotion materials with their family. Lunch trucks may be an effective strategy and delivery method for educating construction workers on healthy behaviors and injury prevention practices.

Construction Workers Struggle with a High Prevalence of Mental Distress and this is Associated with Their Pain and Injuries

PubMed Central

Jacobsen, Henrik Borsting; Caban-Martinez, Alberto; Onyebeke, Lynn C.; Sorensen, Glorian; Dennerlein, Jack T.; Reme, Silje Endresen

2013-01-01

Objectives We aimed to investigate how mental distress was associated with pain and injuries in a convenience sample of construction workers. Methods A cross-sectional, mental health assessment was conducted in a convenience sample of construction workers (N=172). A subsample participated in a clinical interview (N=10). We used a cut-off (≥1.50) on HSCL-25 to determine substantial mental distress and determined associations with pain and injury outcomes. Results The prevalence of substantial mental distress was 16 % in the workers. This was supported by follow-up clinical interviews where nine out of ten workers fulfilled the criteria for a mental disorder. Substantial mental distress was associated with both injury rate and self-reported pain. Conclusion This pilot study strongly suggests the need for rigorous studies on construction worker mental health, and how it affects their work and wellbeing. PMID:24064778

Compositions and method of use of constructed microbial mats

DOEpatents

Bender, Judith A.; Phillips, Peter C.

1997-01-01

Compositions and methods of use of constructed microbial mats, comprising cyanobacteria and purple autotrophic bacteria and an organic nutrient source, in a laminated structure, are described. The constructed microbial mat is used for bioremediation of different individual contaminants and for mixed or multiple contaminants, and for production of beneficial compositions and molecules.

Constructing river stage-discharge rating curves using remotely sensed river cross-sectional inundation areas and river bathymetry

NASA Astrophysics Data System (ADS)

Pan, Feifei; Wang, Cheng; Xi, Xiaohuan

2016-09-01

Remote sensing from satellites and airborne platforms provides valuable data for monitoring and gauging river discharge. One effective approach first estimates river stage from satellite-measured inundation area based on the inundation area-river stage relationship (IARSR), and then the estimated river stage is used to compute river discharge based on the stage-discharge rating (SDR) curve. However, this approach is difficult to implement because of a lack of data for constructing the SDR curves. This study proposes a new method to construct the SDR curves using remotely sensed river cross-sectional inundation areas and river bathymetry. The proposed method was tested over a river reach between two USGS gauging stations, i.e., Kingston Mines (KM) and Copperas Creek (CC) along the Illinois River. First a polygon over each of two cross sections was defined. A complete IARSR curve was constructed inside each polygon using digital elevation model (DEM) and river bathymetric data. The constructed IARSR curves were then used to estimate 47 river water surface elevations at each cross section based on 47 river inundation areas estimated from Landsat TM images collected during 1994-2002. The estimated water surface elevations were substituted into an objective function formed by the Bernoulli equation of gradually varied open channel flow. A nonlinear global optimization scheme was applied to solve the Manning's coefficient through minimizing the objective function value. Finally the SDR curve was constructed at the KM site using the solved Manning's coefficient, channel cross sectional geometry and the Manning's equation, and employed to estimate river discharges. The root mean square error (RMSE) in the estimated river discharges against the USGS measured river discharges is 112.4 m3/s. To consider the variation of the Manning's coefficient in the vertical direction, this study also suggested a power-law function to describe the vertical decline of the Manning's coefficient with the water level from the channel bed lowest elevation to the bank-full level. The constructed SDR curve with the vertical variation of the Manning's coefficient reduced the RMSE in the estimated river discharges to 83.9 m3/s. These results indicate that the method developed and tested in this study is effective and robust, and has the potential for improving our ability of remote sensing of river discharge and providing data for water resources management, global water cycle study, and flood forecasting and prevention.

Use of NDT equipment for construction quality control of hot mix asphalt pavements

DOT National Transportation Integrated Search

2006-08-01

The focus of the study has been to evaluate the utility of seismic methods in the quality management of the hot mix asphalt layers. Procedures are presented to measure the target field moduli of hot mix asphalt (HMA) with laboratory seismic methods, ...

Three-dimensional bioprinting of cell-laden constructs with polycaprolactone protective layers for using various thermoplastic polymers.

PubMed

Kim, Byoung Soo; Jang, Jinah; Chae, Suhun; Gao, Ge; Kong, Jeong-Sik; Ahn, Minjun; Cho, Dong-Woo

2016-08-22

Three-dimensional (3D) cell-printed constructs have been recognized as promising biological substitutes for tissue/organ regeneration. They provide tailored physical properties and biological cues via multi-material printing process. In particular, hybrid bioprinting, enabling to use biodegradable synthetic polymers as framework, has been an attractive method to support weak hydrogels. The constructs with controlled architecture and high shape fidelity were fabricated through this method, depositing spatial arrangement of multi-cell types into microscale constructs. Among biodegradable synthetic polymers, polycaprolactone (PCL) has been commonly chosen in fabrication of cell-printed constructs because of its low melting temperature of 60 °C to be dispensed with extrusion-based bioprinting system. However, in addition to PCL, various synthetic polymers have been widely applied for tissue regeneration. These polymers have distinctive characteristics essential for tissue/organ regeneration. Nevertheless, it is difficult to use some polymers, such as poly (lactic-co-glycolic acid) (PLGA) and polylactic acid (PLA) with 3D bioprinting technology because of their high melting temperature to be dispensed, which can result in thermal damage to the cells in the printed constructs during the fabrication process. We present a novel bioprinting method to use various synthetic polymers in fabrication of cell-printed constructs. PCL was introduced as a protective layer to prevent thermal damage caused by high temperature of polymers during fabrication. Remarkable improvement in cellular activities in the printed constructs with PCL layers was observed compared with the construct without PCL. This bioprinting method can be applied to fabricate more tissue-like constructs through the use of various biomaterials.

Health status assessment of workers during construction phase of highway rehabilitation projects around lahore, Pakistan

PubMed Central

Abrar, Amina; Cheema, Kausar Jamal; Saif, Samia; Mahmood, Asim

2016-01-01

Objective: The study focused on assessment of the health status of workers during construction phase of highway rehabilitation projects at six selected sites of N5 around Lahore, including Kala Shah Kaku, Muridke, Kamuki, Bhaipheru, Pattoki, and Okara. Methods: The study was based on multi-methods approach involving hazard identification through survey and checklist as well as a questionnaire for health status assessment and measurements of health parameters including peak expiratory flow rate (PEFR) and audiometric screening of 300 subjects. Results: The study revealed non-congenial working conditions at the sites. Noise, vibrations, dust, asphalt fumes, poor work postures, and injuries were found to be major health hazards. PEFR of most of the workers was found to be significantly lower than the reference value. Average PEFR±SEM values were 187±5.1 l/min, 178±4.3 l/min, and 266±5.3 l/min in ground preparation workers, asphalt workers, and heavy vehicle drivers, respectively. The highest rate (29%) of hearing loss was recorded among heavy vehicle drivers. Musculoskeletal problems were found to be more common among ground preparation workers. Conclusion: Data revealed unsatisfactory health status of most of the workers. Direct relationship between health outcomes and the type of construction activities were observed. The current study focuses on the importance of including occupational health and safety plan in the execution phase of every developmental project that involves construction activities. PMID:27853055

A New Technique for Personality Scale Construction. Preliminary Findings.

ERIC Educational Resources Information Center

Schaffner, Paul E.; Darlington, Richard B.

Most methods of personality scale construction have clear statistical disadvantages. A hybrid method (Darlington and Bishop, 1966) was found to increase scale validity more than any other method, with large item pools. A simple modification of the Darlington-Bishop method (algebraically and conceptually similar to ridge regression, but…

Construction of exponentially fitted symplectic Runge-Kutta-Nyström methods from partitioned Runge-Kutta methods

NASA Astrophysics Data System (ADS)

Monovasilis, Theodore; Kalogiratou, Zacharoula; Simos, T. E.

2014-10-01

In this work we derive exponentially fitted symplectic Runge-Kutta-Nyström (RKN) methods from symplectic exponentially fitted partitioned Runge-Kutta (PRK) methods methods (for the approximate solution of general problems of this category see [18] - [40] and references therein). We construct RKN methods from PRK methods with up to five stages and fourth algebraic order.

A Conceptual Analysis of Perspective Taking in Support of Socioscientific Reasoning

NASA Astrophysics Data System (ADS)

Kahn, Sami

Scientific literacy is concerned with the informed citizens' ability to negotiate scientifically-related societal issues. The suite of skills necessary to negotiate these complex issues is referred to as Socioscientific Reasoning (SSR). SSR requires, among other things, perspective-taking abilities in order to consider the multi-faceted nature of these open-ended, debatable socioscientific issues (SSI). Developing interventions and instruments to foster and measure perspective taking in support of SSR is therefore critical to the promotion of functional scientific literacy through both research and practice. Although widely studied in many disciplines, perspective taking is a particularly tangled construct that has been used to describe a range of activities representing different psychological domains and applied interchangeably with related constructs such as role taking, empathy, and theory of mind. This ambiguity makes it difficult to ensure construct validity and prevents science education researchers from honing in on the precise skills they wish to study and promote. To clarify the construct of perspective taking, this study undertook a conceptual analysis to operationalize perspective taking, drawing comparisons and distinctions between it and related constructs. Further, by applying a method known as conception development, perspective taking was positioned in the context of SSR, particularly as it relates to moral development, in order to devise a more precise construct relating perspective taking to SSR called socioscientific perspective taking (SSPT). It is asserted that SSPT requires engagement with others or their circumstances, an etic/emic shift, and a moral context comprised of reflective and reflexive judgment. Finally, in order to identify promising interventions for promoting SSPT in the science classroom, the newly-developed SSPT construct was applied to a series of extensively researched curricular frameworks that promote perspective taking in three non-science disciplines including historical empathy (social studies education), method acting (theater education), and autism intervention (special education). The aim of this theoretical inquiry was to translate successful perspective-taking interventions into SSI contexts, yielding an array of promising approaches for fostering SSPT while assessing the feasibility of each of these fields as potential sources for novel and expansive work in SSI to promote scientific literacy. Implications for science education research and practice are discussed.

Study on tourist carrying capacity of sustainable tourism---by taking Qingliang Mountain in the south-eastern china as an example

NASA Astrophysics Data System (ADS)

Jin, Shenglang; Liu, Ting

2017-05-01

This paper analyzed measurable problems of tourist carrying capacity and then studied the corresponding measures by adopting theories and methods of environment sciences. Tourist carrying capacity of Qingliang Mountain was studied by analyzing the system of tourism environment capacity. The results showed that the level of service was 9726, which was smaller than the ecological carrying capacity of 12894. The facilities and spatial capacity were identified as key factors to limit the tourist carrying capacity in Qingliang Mountain. Some advices and measures including newly built and rebuilt basic facilities, construction of management methods for slack and peak tourist season respectively, construction of new sight spot and touring path were discussed to improve the tourist carrying capacity of Qingliang Mountain and solve the problems of overloading of tourists in the peak season.

Feasibility study of structured diagnosis methods for functional dyspepsia in Korean medicine clinics.

PubMed

Park, Jeong Hwan; Kim, Soyoung; Park, Jae-Woo; Ko, Seok-Jae; Lee, Sanghun

2017-12-01

Functional dyspepsia (FD) is the seventh most common disease encountered in Korean medicine (KM) clinics. Despite the large number of FD patients visiting KM clinics, the accumulated medical records have no utility in evidence development, due to being unstructured. This study aimed to construct a standard operating procedure (SOP) with appropriate structured diagnostic methods for FD, and assess the feasibility for use in KM clinics. Two rounds of professional surveys were conducted by 10 Korean internal medicine professors to select the representative diagnostic methods. A feasibility study was conducted to evaluate compliance and time required for using the structured diagnostic methods by three specialists in two hospitals. As per the results of the professional survey, five questionnaires and one basic diagnostic method were selected. An SOP was constructed based on the survey results, and a feasibility study showed that the SOP compliance score (out of 5) was 3.45 among the subjects, and 3.25 among the practitioners. The SOP was acceptable and was not deemed difficult to execute. The total execution time was 136.5 minutes, out of which the gastric emptying test time was 129 minutes. This feasibility study of the SOP with structured diagnostic methods for FD confirmed it was adequate for use in KM clinics. It is expected that these study findings will be helpful to clinicians who wish to conduct observational studies as well as to generate quantitative medical records to facilitate Big Data research.

Convenience of Statistical Approach in Studies of Architectural Ornament and Other Decorative Elements Specific Application

NASA Astrophysics Data System (ADS)

Priemetz, O.; Samoilov, K.; Mukasheva, M.

2017-11-01

An ornament is an actual phenomenon of the architecture modern theory, a common element in the practice of design and construction. It has been an important aspect of shaping for millennia. The description of the methods of its application occupies a large place in the studies on the theory and practice of architecture. However, the problem of the saturation of compositions with ornamentation, the specificity of its themes and forms have not been sufficiently studied yet. This aspect requires accumulation of additional knowledge. The application of quantitative methods for the plastic solutions types and a thematic diversity of facade compositions of buildings constructed in different periods creates another tool for an objective analysis of ornament development. It demonstrates the application of this approach for studying the features of the architectural development in Kazakhstan at the end of the XIX - XXI centuries.

Canons in Harmony, or Canons in Conflict: A Cultural Perspective on the Curriculum and Pedagogy of Jazz Improvization

ERIC Educational Resources Information Center

Prouty, Kenneth E.

2004-01-01

This essay examines how jazz educators construct methods for teaching the art of improvisation in institutionalized jazz studies programs. Unlike previous studies of the processes and philosophies of jazz instruction, I examine such processes from a cultural standpoint, to identify why certain methods might be favored over others. Specifically,…

Applied Chaos Level Test for Validation of Signal Conditions Underlying Optimal Performance of Voice Classification Methods

ERIC Educational Resources Information Center

Liu, Boquan; Polce, Evan; Sprott, Julien C.; Jiang, Jack J.

2018-01-01

Purpose: The purpose of this study is to introduce a chaos level test to evaluate linear and nonlinear voice type classification method performances under varying signal chaos conditions without subjective impression. Study Design: Voice signals were constructed with differing degrees of noise to model signal chaos. Within each noise power, 100…

Epistemic Beliefs of Middle and High School Students in a Problem-Based, Scientific Inquiry Unit: An Exploratory, Mixed Methods Study

ERIC Educational Resources Information Center

Gu, Jiangyue

2016-01-01

Epistemic beliefs are individuals' beliefs about the nature of knowledge, how knowledge is constructed, and how knowledge can be justified. This study employed a mixed-methods approach to examine: (a) middle and high school students' self-reported epistemic beliefs (quantitative) and epistemic beliefs revealed from practice (qualitative) during a…

Students' General Knowledge of the Learning Process: A Mixed Methods Study Illustrating Integrated Data Collection and Data Consolidation

ERIC Educational Resources Information Center

van Velzen, Joke H.

2018-01-01

There were two purposes for this mixed methods study: to investigate (a) the realistic meaning of awareness and understanding as the underlying constructs of general knowledge of the learning process and (b) a procedure for data consolidation. The participants were 11th-grade high school and first-year university students. Integrated data…

A data-driven approach to reverse engineering customer engagement models: towards functional constructs.

PubMed

de Vries, Natalie Jane; Carlson, Jamie; Moscato, Pablo

2014-01-01

Online consumer behavior in general and online customer engagement with brands in particular, has become a major focus of research activity fuelled by the exponential increase of interactive functions of the internet and social media platforms and applications. Current research in this area is mostly hypothesis-driven and much debate about the concept of Customer Engagement and its related constructs remains existent in the literature. In this paper, we aim to propose a novel methodology for reverse engineering a consumer behavior model for online customer engagement, based on a computational and data-driven perspective. This methodology could be generalized and prove useful for future research in the fields of consumer behaviors using questionnaire data or studies investigating other types of human behaviors. The method we propose contains five main stages; symbolic regression analysis, graph building, community detection, evaluation of results and finally, investigation of directed cycles and common feedback loops. The 'communities' of questionnaire items that emerge from our community detection method form possible 'functional constructs' inferred from data rather than assumed from literature and theory. Our results show consistent partitioning of questionnaire items into such 'functional constructs' suggesting the method proposed here could be adopted as a new data-driven way of human behavior modeling.

Exploring the Driving Factors of Construction Industrialization Development in China.

PubMed

Xiahou, Xiaer; Yuan, Jingfeng; Liu, Yan; Tang, Yuchun; Li, Qiming

2018-03-03

Construction industrialization (CI) has been adopted worldwide because of its potential benefits. However, current research shows the incentives for adopting CI may differ in different regions. While the promotion of CI in China is still at the initial stage, a systematical analysis of the driving factors would help decision makers get a comprehensive understanding of CI development and select proper strategies to promote CI. This research combines qualitative and quantitative methods to explore the construction industrialization driving factors (CIDFs) in China. The grounded theory method (GTM) was employed to explore CI concepts among 182 CI-related articles published in 10 top-tier journals from 2000 to 2017. A total of 15 CIDFs were identified, including one suggested by professionals during a pre-test questionnaire survey. The analysis showed that the development of CI in China is pushed by macrodevelopment and pulled by the government and is also a self-driven process. The major driving factors for CI adoption in China are the transformation and upgrade of the conventional construction industry and the solution of development dilemmas. Our study also suggests that pilot programs are, currently, the most effective method to promote CI in China and to accumulate experience so to gain recognition by the society. This research is also of value for CI promotion in other developing countries.

[Research on outlier detection methods for determination of oil yield in oil shales using near-infrared spectroscopy].

PubMed

Zhang, Huai-zhu; Lin, Jun; Zhang, Huai-Zhu

2014-06-01

In the present paper, the outlier detection methods for determination of oil yield in oil shale using near-infrared (NIR) diffuse reflection spectroscopy was studied. During the quantitative analysis with near-infrared spectroscopy, environmental change and operator error will both produce outliers. The presence of outliers will affect the overall distribution trend of samples and lead to the decrease in predictive capability. Thus, the detection of outliers are important for the construction of high-quality calibration models. The methods including principal component analysis-Mahalanobis distance (PCA-MD) and resampling by half-means (RHM) were applied to the discrimination and elimination of outliers in this work. The thresholds and confidences for MD and RHM were optimized using the performance of partial least squares (PLS) models constructed after the elimination of outliers, respectively. Compared with the model constructed with the data of full spectrum, the values of RMSEP of the models constructed with the application of PCA-MD with a threshold of a value equal to the sum of average and standard deviation of MD, RHM with the confidence level of 85%, and the combination of PCA-MD and RHM, were reduced by 48.3%, 27.5% and 44.8%, respectively. The predictive ability of the calibration model has been improved effectively.

Exploring the Driving Factors of Construction Industrialization Development in China

PubMed Central

Xiahou, Xiaer; Yuan, Jingfeng; Tang, Yuchun; Li, Qiming

2018-01-01

Construction industrialization (CI) has been adopted worldwide because of its potential benefits. However, current research shows the incentives for adopting CI may differ in different regions. While the promotion of CI in China is still at the initial stage, a systematical analysis of the driving factors would help decision makers get a comprehensive understanding of CI development and select proper strategies to promote CI. This research combines qualitative and quantitative methods to explore the construction industrialization driving factors (CIDFs) in China. The grounded theory method (GTM) was employed to explore CI concepts among 182 CI-related articles published in 10 top-tier journals from 2000 to 2017. A total of 15 CIDFs were identified, including one suggested by professionals during a pre-test questionnaire survey. The analysis showed that the development of CI in China is pushed by macrodevelopment and pulled by the government and is also a self-driven process. The major driving factors for CI adoption in China are the transformation and upgrade of the conventional construction industry and the solution of development dilemmas. Our study also suggests that pilot programs are, currently, the most effective method to promote CI in China and to accumulate experience so to gain recognition by the society. This research is also of value for CI promotion in other developing countries. PMID:29510507

Results of a community-based survey of construction safety climate for Hispanic workers

PubMed Central

Marin, Luz S; Cifuentes, Manuel; Roelofs, Cora

2015-01-01

Background: Hispanic construction workers experience high rates of occupational injury, likely influenced by individual, organizational, and social factors. Objectives: To characterize the safety climate of Hispanic construction workers using worker, contractor, and supervisor perceptions of the workplace. Methods: We developed a 40-item interviewer-assisted survey with six safety climate dimensions and administered it in Spanish and English to construction workers, contractors, and supervisors. A safety climate model, comparing responses and assessing contributing factors was created based on survey responses. Results: While contractors and construction supervisors’ (n = 128) scores were higher, all respondents shared a negative perception of safety climate. Construction workers had statistically significantly lower safety climate scores compared to supervisors and contractors (30.6 vs 46.5%, P<0.05). Safety climate scores were not associated with English language ability or years lived in the United States. Conclusions: We found that Hispanic construction workers in this study experienced a poor safety climate. The Hispanic construction safety climate model we propose can serve as a framework to guide organizational safety interventions and evaluate safety climate improvements. PMID:26145454

An Exploratory Factor Analysis and Construct Validity of the Resident Choice Assessment Scale with Paid Carers of Adults with Intellectual Disabilities and Challenging Behavior in Community Settings

ERIC Educational Resources Information Center

Ratti, Victoria; Vickerstaff, Victoria; Crabtree, Jason; Hassiotis, Angela

2017-01-01

Introduction: The Resident Choice Assessment Scale (RCAS) is used to assess choice availability for adults with intellectual disabilities (ID). The aim of the study was to explore the factor structure, construct validity, and internal consistency of the measure in community settings to further validate this tool. Method: 108 paid carers of adults…

Correlates of fruit and vegetable consumption among construction laborers and motor freight workers

PubMed Central

Nagler, Eve M.; Viswanath, K.; Ebbeling, Cara B.; Stoddard, Anne M.; Sorensen, Glorian C.

2013-01-01

Purpose To compare and contrast correlates of fruit and vegetable consumption in two blue-collar populations: construction laborers and motor freight workers. Methods Cross-sectional data were collected from two groups of male workers: (1) construction laborers (N=1013; response rate = 44%) randomly selected from a national sample, as part of a diet and smoking cessation study; and (2) motor freight workers (N=542; response rate = 78%) employed in eight trucking terminals, as part of a tobacco cessation and weight management study. Data were analyzed using linear regression modeling methods. Results For both groups, higher income and believing it was important to eat right because of work were positively associated with fruit and vegetable consumption; conversely, being White was associated with lower intake. Construction laborers who reported eating junk food due to workplace stress and fatigue had lower fruit and vegetable intake. For motor freight workers, perceiving fast food to be the only choice at work and lack of time to eat right were associated with lower consumption. Conclusion Comparing occupational groups illustrates how work experiences may be related to fruit and vegetable consumption in different ways as well as facilitates the development of interventions that can be used across groups. PMID:22729935

Assessment of Useful Plants in the Catchment Area of the Proposed Ntabelanga Dam in the Eastern Cape Province, South Africa

PubMed Central

2017-01-01

Background The developmental projects, particularly construction of dams, result in permanent changes of terrestrial ecosystems through inundation. Objective The present study was undertaken aiming at documenting useful plant species in Ntabelanga dam catchment area that will be impacted by the construction of the proposed dam. Methods A total of 55 randomly selected quadrats were used to assess plant species diversity and composition. Participatory rural appraisal (PRA) methods were used to identify useful plant species growing in the catchment area through interviews with 108 randomly selected participants. Results A total of 197 plant species were recorded with 95 species (48.2%) utilized for various purposes. Use categories included ethnoveterinary and herbal medicines (46 species), food plants (37 species), construction timber and thatching (14 species), firewood (five species), browse, live fence, and ornamental (four species each), and brooms and crafts (two species). Conclusion This study showed that plant species play an important role in the daily life and culture of local people. The construction of Ntabelanga dam is, therefore, associated with several positive and negative impacts on plant resources which are not fully integrated into current decision-making, largely because of lack of multistakeholder dialogue on the socioeconomic issues of such an important project. PMID:28828397

Evidence of validity of the Stress-Producing Life Events (SPLE) instrument.

PubMed

Rizzini, Marta; Santos, Alcione Miranda Dos; Silva, Antônio Augusto Moura da

2018-01-01

OBJECTIVE Evaluate the construct validity of a list of eight Stressful Life Events in pregnant women. METHODS A cross-sectional study was conducted with 1,446 pregnant women in São Luís, MA, and 1,364 pregnant women in Ribeirão Preto, SP (BRISA cohort), from February 2010 to June 2011. In the exploratory factorial analysis, the promax oblique rotation was used and for the calculation of the internal consistency, we used the compound reliability. The construct validity was determined by means of the confirmatory factorial analysis with the method of estimation of weighted least squares adjusted by the mean and variance. RESULTS The model with the best fit in the exploratory analysis was the one that retained three factors with a cumulative variance of 61.1%. The one-factor model did not obtain a good fit in both samples in the confirmatory analysis. The three-factor model called Stress-Producing Life Events presented a good fit (RMSEA < 0.05; CFI/TLI > 0.90) for both samples. CONCLUSIONS The Stress-Producing Life Events constitute a second order construct with three dimensions related to health, personal and financial aspects and violence. This study found evidence that confirms the construct validity of a list of stressor events, entitled Stress-Producing Life Events Inventory.

Recognition method of construction conflict based on driver's eye movement.

PubMed

Xu, Yi; Li, Shiwu; Gao, Song; Tan, Derong; Guo, Dong; Wang, Yuqiong

2018-04-01

Drivers eye movement data in simulated construction conflicts at different speeds were collected and analyzed to find the relationship between the drivers' eye movement and the construction conflict. On the basis of the relationship between the drivers' eye movement and the construction conflict, the peak point of wavelet processed pupil diameter, the first point on the left side of the peak point and the first blink point after the peak point are selected as key points for locating construction conflict periods. On the basis of the key points and the GSA, a construction conflict recognition method so called the CCFRM is proposed. And the construction conflict recognition speed and location accuracy of the CCFRM are verified. The good performance of the CCFRM verified the feasibility of proposed key points in construction conflict recognition. Copyright © 2018 Elsevier Ltd. All rights reserved.

Big Data is a powerful tool for environmental improvements in the construction business

NASA Astrophysics Data System (ADS)

Konikov, Aleksandr; Konikov, Gregory

2017-10-01

The work investigates the possibility of applying the Big Data method as a tool to implement environmental improvements in the construction business. The method is recognized as effective in analyzing big volumes of heterogeneous data. It is noted that all preconditions exist for this method to be successfully used for resolution of environmental issues in the construction business. It is proven that the principal Big Data techniques (cluster analysis, crowd sourcing, data mixing and integration) can be applied in the sphere in question. It is concluded that Big Data is a truly powerful tool to implement environmental improvements in the construction business.

Constructing Media Artifacts in a Social Constructivist Environment to Enhance Students' Environmental Awareness and Activism

NASA Astrophysics Data System (ADS)

Karahan, Engin; Roehrig, Gillian

2015-02-01

Current science education reforms and policy documents highlight the importance of environmental awareness and perceived need for activism. As "environmental problems are socially constructed in terms of their conceptualized effects on individuals, groups, other living things and systems research based on constructivist principles provides not only a coherent framework in which to theorize about learning, but also a context for understanding socially constructed issues" (Palmer and Suggate in Res Pap Educ 19(2), 2004, p. 208). This research study investigated the impacts of the learning processes structured based on the theories of constructionism and social constructivism on students' environmental awareness and perceived need for activism. Students constructed multimedia artifacts expressing their knowledge, attitudes, awareness, and activism about environmental issues through a constructionist design process. In addition, a social networking site was designed and used to promote social interaction among students. Twenty-two high school environmental science students participated in this study. A convergent mixed methods design was implemented to allow for the triangulation of methods by directly comparing and contrasting quantitative results with qualitative findings for corroboration and validation purposes. Using a mixed method approach, quantitative findings are supported with qualitative data (student video projects, writing prompts, blog entries, video projects of the students, observational field notes, and reflective journals) including spontaneous responses in both synchronous and asynchronous conversations on the social network to provide a better understanding of the change in students' environmental awareness and perceived need for activism. The findings of the study indicated that students' environmental awareness and perceived need for activism were improved at different scales (personal, community, global) throughout the constructionist and social constructivist learning processes.

A Review of Application Building Information Modeling (BIM) During Pre-Construction Stage: Retrospective and Future Directions

NASA Astrophysics Data System (ADS)

Edra Nisa Lau, Santi; Zakaria, Rozana; Aminudin, Eeydzah; Saar, Chai Chang; Yusof, Aswadi; Fatihi Hafifi Che Wahid, Che Muhammad

2018-04-01

Pre-construction is one of the biggest areas of risk and uncertainty in construction project as it deals with subsurface ground conditions information. The amount of detail data needed in pre-construction especially for existing data modelling and site analysis should be sufficient enough to ensure that significant risks could not reasonably be anticipated. Current practicing method in interpreting data during this stage tasks reveal limitation. Construction industry faced many obstacles due to the depends on the traditional practice; paper-based document which missing and redundant data always happened. In recent years, there has been a shift in construction where people move to BIM application because of its potential to reduce the problem faced by infrastructure world. BIM has become a successful technology and widely popular in the construction world especially in developed countries because of its potential. Nowadays, people are moving one step ahead in BIM which is adoption of BIM during pre-construction stage. Thus, this paper review studies centered on BIM-integrated modelling during preconstruction stage. But there is lack of practical researches have been made during this stage. Although a large number of studies on BIM have been conducted in the past decade, a lack of consensus remains among researchers and practitioners regarding the applications of BIM during pre-construction stage, the availability of subsequent data integration tool for geotechnical activity. A comprehensive literature review was conducted for data collection and analysis. After in-depth review of journal articles widely cover the application of BIM, this study summarizes an overview and critical reflection of geotechnical data integration using BIM during pre-construction stage. The results are useful for the identification of research clusters and topics in the BIM community.

A comparison of confidence/credible interval methods for the area under the ROC curve for continuous diagnostic tests with small sample size.

PubMed

Feng, Dai; Cortese, Giuliana; Baumgartner, Richard

2017-12-01

The receiver operating characteristic (ROC) curve is frequently used as a measure of accuracy of continuous markers in diagnostic tests. The area under the ROC curve (AUC) is arguably the most widely used summary index for the ROC curve. Although the small sample size scenario is common in medical tests, a comprehensive study of small sample size properties of various methods for the construction of the confidence/credible interval (CI) for the AUC has been by and large missing in the literature. In this paper, we describe and compare 29 non-parametric and parametric methods for the construction of the CI for the AUC when the number of available observations is small. The methods considered include not only those that have been widely adopted, but also those that have been less frequently mentioned or, to our knowledge, never applied to the AUC context. To compare different methods, we carried out a simulation study with data generated from binormal models with equal and unequal variances and from exponential models with various parameters and with equal and unequal small sample sizes. We found that the larger the true AUC value and the smaller the sample size, the larger the discrepancy among the results of different approaches. When the model is correctly specified, the parametric approaches tend to outperform the non-parametric ones. Moreover, in the non-parametric domain, we found that a method based on the Mann-Whitney statistic is in general superior to the others. We further elucidate potential issues and provide possible solutions to along with general guidance on the CI construction for the AUC when the sample size is small. Finally, we illustrate the utility of different methods through real life examples.

Monitoring Ground Deformation of Subway Area during the Construction Based on the Method of Multi-Temporal Coherent Targets Analysis

NASA Astrophysics Data System (ADS)

Zhang, L.; Wu, J.; Zhao, J.; Yuan, M.

2018-04-01

Multi-temporal coherent targets analysis is a high-precision and high-spatial-resolution monitoring method for urban surface deformation based on Differential Synthetic Aperture Radar (DInSAR), and has been successfully applied to measure land subsidence, landslide and strain accumulation caused by fault movement and so on. In this paper, the multi-temporal coherent targets analysis is used to study the settlement of subway area during the period of subway construction. The eastern extension of Shanghai Metro Line. 2 is taking as an example to study the subway settlement during the construction period. The eastern extension of Shanghai Metro Line. 2 starts from Longyang Road and ends at Pudong airport. Its length is 29.9 kilometers from east to west and it is a key transportation line to the Pudong Airport. 17 PalSAR images during 2007 and 2010 are applied to analyze and invert the settlement of the buildings nearby the subway based on the multi-temporal coherent targets analysis. But there are three significant deformation areas nearby the Line 2 between 2007 and 2010, with maximum subsidence rate up to 30 mm/y in LOS. The settlement near the Longyang Road station and Chuansha Town are both caused by newly construction and city expansion. The deformation of the coastal dikes suffer from heavy settlement and the rate is up to -30 mm/y. In general, the area close to the subway line is relatively stable during the construction period.

Robust Classification and Segmentation of Planar and Linear Features for Construction Site Progress Monitoring and Structural Dimension Compliance Control

NASA Astrophysics Data System (ADS)

Maalek, R.; Lichti, D. D.; Ruwanpura, J.

2015-08-01

The application of terrestrial laser scanners (TLSs) on construction sites for automating construction progress monitoring and controlling structural dimension compliance is growing markedly. However, current research in construction management relies on the planned building information model (BIM) to assign the accumulated point clouds to their corresponding structural elements, which may not be reliable in cases where the dimensions of the as-built structure differ from those of the planned model and/or the planned model is not available with sufficient detail. In addition outliers exist in construction site datasets due to data artefacts caused by moving objects, occlusions and dust. In order to overcome the aforementioned limitations, a novel method for robust classification and segmentation of planar and linear features is proposed to reduce the effects of outliers present in the LiDAR data collected from construction sites. First, coplanar and collinear points are classified through a robust principal components analysis procedure. The classified points are then grouped using a robust clustering method. A method is also proposed to robustly extract the points belonging to the flat-slab floors and/or ceilings without performing the aforementioned stages in order to preserve computational efficiency. The applicability of the proposed method is investigated in two scenarios, namely, a laboratory with 30 million points and an actual construction site with over 150 million points. The results obtained by the two experiments validate the suitability of the proposed method for robust segmentation of planar and linear features in contaminated datasets, such as those collected from construction sites.

Situating and Constructing Diversity in Semi-Structured Interviews

PubMed Central

McIntosh, Michele J.; Morse, Janice M.

2015-01-01

Although semi-structured interviews (SSIs) are used extensively in research, scant attention is given to their diversity, underlying assumptions, construction, and broad applications to qualitative and mixed-method research. In this three-part article, we discuss the following: (a) how the SSI is situated historically including its evolution and diversification, (b) the principles of constructing SSIs, and (c) how SSIs are utilized as a stand-alone research method, and as strategy within a mixed-method design. PMID:28462313

Investigation of using shrinking method in construction of Institute for Research in Fundamental Sciences Electron Linear Accelerator TW-tube (IPM TW-Linac tube)

NASA Astrophysics Data System (ADS)

Ghasemi, F.; Abbasi Davani, F.

2015-06-01

Due to Iran's growing need for accelerators in various applications, IPM's electron Linac project has been defined. This accelerator is a 15 MeV energy S-band traveling-wave accelerator which is being designed and constructed based on the klystron that has been built in Iran. Based on the design, operating mode is π /2 and the accelerating chamber consists of two 60cm long tubes with constant impedance and a 30cm long buncher. Amongst all construction methods, shrinking method is selected for construction of IPM's electron Linac tube because it has a simple procedure and there is no need for large vacuum or hydrogen furnaces. In this paper, different aspects of this method are investigated. According to the calculations, linear ratio of frequency alteration to radius change is 787.8 MHz/cm, and the maximum deformation at the tube wall where disks and the tube make contact is 2.7μ m. Applying shrinking method for construction of 8- and 24-cavity tubes results in satisfactory frequency and quality factor. Average deviations of cavities frequency of 8- and 24-cavity tubes to the design values are 0.68 MHz and 1.8 MHz respectively before tune and 0.2 MHz and 0.4 MHz after tune. Accelerating tubes, buncher, and high power couplers of IPM's electron linac are constructed using shrinking method.

Quantum Spectra and Dynamics

NASA Astrophysics Data System (ADS)

Arce, Julio Cesar

1992-01-01

This work focuses on time-dependent quantum theory and methods for the study of the spectra and dynamics of atomic and molecular systems. Specifically, we have addressed the following two problems: (i) Development of a time-dependent spectral method for the construction of spectra of simple quantum systems--This includes the calculation of eigenenergies, the construction of bound and continuum eigenfunctions, and the calculation of photo cross-sections. Computational applications include the quadrupole photoabsorption spectra and dissociation cross-sections of molecular hydrogen from various vibrational states in its ground electronic potential -energy curve. This method is seen to provide an advantageous alternative, both from the computational and conceptual point of view, to existing standard methods. (ii) Explicit time-dependent formulation of photoabsorption processes --Analytical solutions of the time-dependent Schrodinger equation are constructed and employed for the calculation of probability densities, momentum distributions, fluxes, transition rates, expectation values and correlation functions. These quantities are seen to establish the link between the dynamics and the calculated, or measured, spectra and cross-sections, and to clarify the dynamical nature of the excitation, transition and ejection processes. Numerical calculations on atomic and molecular hydrogen corroborate and complement the previous results, allowing the identification of different regimes during the photoabsorption process.

Sample Size and Power Estimates for a Confirmatory Factor Analytic Model in Exercise and Sport: A Monte Carlo Approach

ERIC Educational Resources Information Center

Myers, Nicholas D.; Ahn, Soyeon; Jin, Ying

2011-01-01

Monte Carlo methods can be used in data analytic situations (e.g., validity studies) to make decisions about sample size and to estimate power. The purpose of using Monte Carlo methods in a validity study is to improve the methodological approach within a study where the primary focus is on construct validity issues and not on advancing…

Project Delivery Methods.

ERIC Educational Resources Information Center

Dolan, Thomas G.

2003-01-01

Describes project delivery methods that are replacing the traditional Design/Bid/Build linear approach to the management, design, and construction of new facilities. These variations can enhance construction management and teamwork. (SLD)

Fast and accurate semi-automated segmentation method of spinal cord MR images at 3T applied to the construction of a cervical spinal cord template.

PubMed

El Mendili, Mohamed-Mounir; Chen, Raphaël; Tiret, Brice; Villard, Noémie; Trunet, Stéphanie; Pélégrini-Issac, Mélanie; Lehéricy, Stéphane; Pradat, Pierre-François; Benali, Habib

2015-01-01

To design a fast and accurate semi-automated segmentation method for spinal cord 3T MR images and to construct a template of the cervical spinal cord. A semi-automated double threshold-based method (DTbM) was proposed enabling both cross-sectional and volumetric measures from 3D T2-weighted turbo spin echo MR scans of the spinal cord at 3T. Eighty-two healthy subjects, 10 patients with amyotrophic lateral sclerosis, 10 with spinal muscular atrophy and 10 with spinal cord injuries were studied. DTbM was compared with active surface method (ASM), threshold-based method (TbM) and manual outlining (ground truth). Accuracy of segmentations was scored visually by a radiologist in cervical and thoracic cord regions. Accuracy was also quantified at the cervical and thoracic levels as well as at C2 vertebral level. To construct a cervical template from healthy subjects' images (n=59), a standardization pipeline was designed leading to well-centered straight spinal cord images and accurate probability tissue map. Visual scoring showed better performance for DTbM than for ASM. Mean Dice similarity coefficient (DSC) was 95.71% for DTbM and 90.78% for ASM at the cervical level and 94.27% for DTbM and 89.93% for ASM at the thoracic level. Finally, at C2 vertebral level, mean DSC was 97.98% for DTbM compared with 98.02% for TbM and 96.76% for ASM. DTbM showed similar accuracy compared with TbM, but with the advantage of limited manual interaction. A semi-automated segmentation method with limited manual intervention was introduced and validated on 3T images, enabling the construction of a cervical spinal cord template.

Environment Impact Analysis of Shield Passing Alongside Bridge Pile Platform Using Three Dimensional Numerical Simulation

NASA Astrophysics Data System (ADS)

Shang, Yanliang; Shi, Wenjun; Han, Tongyin; Qin, Zhichao; Du, Shouji

2017-10-01

The shield method has many advantages in the construction of urban subway, and has become the preferred method for the construction of urban subway tunnel. Taking Shijiazhuang metro line 3 (administrative center station - garden park station interval) Passing alongside bridge as the engineering background, double shield crossing the bridge pile foundation model was set up. The deformation and internal force of the pile foundation during the construction of the shield were analyzed. Pile stress caused by shield construction increases, but the maximum stress is less than the design strength; the maximum surface settlement caused by the construction of 10.2 mm, the results meet the requirements of construction.

Spectrum-based method to generate good decoy libraries for spectral library searching in peptide identifications.

PubMed

Cheng, Chia-Ying; Tsai, Chia-Feng; Chen, Yu-Ju; Sung, Ting-Yi; Hsu, Wen-Lian

2013-05-03

As spectral library searching has received increasing attention for peptide identification, constructing good decoy spectra from the target spectra is the key to correctly estimating the false discovery rate in searching against the concatenated target-decoy spectral library. Several methods have been proposed to construct decoy spectral libraries. Most of them construct decoy peptide sequences and then generate theoretical spectra accordingly. In this paper, we propose a method, called precursor-swap, which directly constructs decoy spectral libraries directly at the "spectrum level" without generating decoy peptide sequences by swapping the precursors of two spectra selected according to a very simple rule. Our spectrum-based method does not require additional efforts to deal with ion types (e.g., a, b or c ions), fragment mechanism (e.g., CID, or ETD), or unannotated peaks, but preserves many spectral properties. The precursor-swap method is evaluated on different spectral libraries and the results of obtained decoy ratios show that it is comparable to other methods. Notably, it is efficient in time and memory usage for constructing decoy libraries. A software tool called Precursor-Swap-Decoy-Generation (PSDG) is publicly available for download at http://ms.iis.sinica.edu.tw/PSDG/.

Using Peano Curves to Construct Laplacians on Fractals

NASA Astrophysics Data System (ADS)

Molitor, Denali; Ott, Nadia; Strichartz, Robert

2015-12-01

We describe a new method to construct Laplacians on fractals using a Peano curve from the circle onto the fractal, extending an idea that has been used in the case of certain Julia sets. The Peano curve allows us to visualize eigenfunctions of the Laplacian by graphing the pullback to the circle. We study in detail three fractals: the pentagasket, the octagasket and the magic carpet. We also use the method for two nonfractal self-similar sets, the torus and the equilateral triangle, obtaining appealing new visualizations of eigenfunctions on the triangle. In contrast to the many familiar pictures of approximations to standard Peano curves, that do no show self-intersections, our descriptions of approximations to the Peano curves have self-intersections that play a vital role in constructing graph approximations to the fractal with explicit graph Laplacians that give the fractal Laplacian in the limit.

Construction of an artificial symbiotic community using a Chlorella–symbiont association as a model

PubMed Central

Imase, Masato; Watanabe, Keiji; Aoyagi, Hideki; Tanaka, Hideo

2008-01-01

Chlorella sorokiniana IAM C-212 produces a polysaccharide gel, termed a sheath, under photoautotrophic conditions. The C. sorokiniana sheath is a suitable habitat for several symbiotic microorganisms because it ensures close proximity between the C. sorokiniana and symbionts. In this study, we established a method for increasing the volume of the sheath produced by C. sorokiniana, and proposed a method for constructing artificial communities of Chlorella and symbiotic microorganisms. The C. sorokiniana sheath was increased by addition of calcium chloride solution. The sheath resulted in coflocculation of C. sorokiniana and the associated symbiotic bacteria, thus strengthening the bacterial–Chlorella symbiotic association. An application of this technique was demonstrated by constructing a complex of C. sorokiniana and a propionate-degrading bacterium (PDS1). Although propionate inhibited the growth of axenic C. sorokiniana, the C. sorokiniana–PDS1 complex showed good growth in a medium containing a high concentration of propionate. PMID:18269632

Assessment of safety culture among job positions in high-rise construction: a hybrid fuzzy multi criteria decision-making (FMCDM) approach.

PubMed

Ardeshir, A; Mohajeri, M

2018-06-01

The construction industry is known as one of the most dangerous industries, which not only requires sound operation of executive laws and regulations, but also necessitates the safety culture of all workers at workshops. Therefore, the aim of this research is to identify the factors of safety culture and ranking occupations in jobsites based on those factors in order to proactively improve the safety culture of construction projects and subsequently promote safety conditions and worksites. In this study, safety culture criteria are weighted by a combination of Fuzzy Decision Trail and Evaluation Laboratory and Fuzzy ANP methods. Next, different job positions in high-rise projects are ranked using the Fuzzy Technique for Order of Preference by Similarity to Ideal Solution method. Findings demonstrated that the project manager, site superintendent and supervisor occupations had the highest and labourers had the lowest level of safety culture in the high-rise construction industry. Furthermore, factors such as safety supervision and training must be considered more seriously in order to create a positive safety culture among workers.

Evaluation of an alternative method for wastewater treatment containing pesticides using solar photocatalytic oxidation and constructed wetlands.

PubMed

Berberidou, Chrysanthi; Kitsiou, Vasiliki; Lambropoulou, Dimitra A; Antoniadis, Αpostolos; Ntonou, Eleftheria; Zalidis, George C; Poulios, Ioannis

2017-06-15

The present study proposes an integrated system based on the synergetic action of solar photocatalytic oxidation with surface flow constructed wetlands for the purification of wastewater contaminated with pesticides. Experiments were conducted at pilot scale using simulated wastewater containing the herbicide clopyralid. Three photocatalytic methods under solar light were investigated: the photo-Fenton and the ferrioxalate reagent as well as the combination of photo-Fenton with TiO 2 P25, which all led to similar mineralization rates. The subsequent treatment in constructed wetlands resulted in further decrease of DOC and inorganic ions concentrations, especially of NO 3 - . Clopyralid was absent in the outlet of the wetlands, while the concentration of the detected intermediates was remarkably low. These findings are in good agreement with the results of phytotoxicity of the wastewater, after treatment with the ferrioxalate/wetlands process, which was significantly reduced. Thus, this integrated system based on solar photocatalysis and constructed wetlands has the potential to effectively detoxify wastewater containing pesticides, producing a purified effluent which could be exploited for reuse applications. Copyright © 2016 Elsevier Ltd. All rights reserved.

A Framework for Teaching Software Development Methods

ERIC Educational Resources Information Center

Dubinsky, Yael; Hazzan, Orit

2005-01-01

This article presents a study that aims at constructing a teaching framework for software development methods in higher education. The research field is a capstone project-based course, offered by the Technion's Department of Computer Science, in which Extreme Programming is introduced. The research paradigm is an Action Research that involves…

Knowledge Activation and Schema Construction.

ERIC Educational Resources Information Center

Alvarez, Marino C.

This study examined how instruction that encourages critical thinking about what has been read can lead to incorporated knowledge that can be retrieved and applied to other related settings. Case-based learning (an instructional method long used with graduate business, law, and medical students) is one method that can be used to foster critical…

Methods and Models for the Construction of Weakly Parallel Tests. Research Report 90-4.

ERIC Educational Resources Information Center

Adema, Jos J.

Methods are proposed for the construction of weakly parallel tests, that is, tests with the same test information function. A mathematical programing model for constructing tests with a prespecified test information function and a heuristic for assigning items to tests such that their information functions are equal play an important role in the…

A science methods course in a professional development school context: A case study of student teachers

NASA Astrophysics Data System (ADS)

Sopko, Linda Diane

The purpose of this case study was to explore how six student teachers constructed their personal understanding about teaching science to elementary students in the context of a professional development school (PDS). The science methods course was one of five university courses that they attended at the PDS site. The participants spent the remainder of the school day in an assigned classroom where they assisted the classroom teacher in a paraprofessional role. This study was an attempt to determine the knowledge that the participants constructed of science instruction and the school during the preservice semester of their PDS experience and what knowledge was transferred into their student teaching practices. The methodology selected was qualitative. A case study was conducted to determine the constructs of the participants. Data collection included documents concerning the PDS school and personal artifacts of the student teachers. Student teachers, cooperating teachers, and administrators were interviewed. The student teachers were also observed teaching. Triangulation was achieved with the use of multiple data sources, a reflexive journal, and peer debriefers. A cross case comparison was used to identify issues salient to the research questions. The PDS context immediately challenged the participants' prior conceptions about how children learn and should be instructed. Participants believed that the situational knowledge constructed during the PDS semester contributed to their self-confidence during student teaching. The instructional emphasis on standardized tests in the PDS and the limited emphasis on science curriculum and instruction constructed an image of science as a minor component in the elementary curriculum. The student teachers were able to transfer knowledge of inquiry-based instructional strategies, as modeled and practiced in their science methods course, into their science lesson during student teaching. One student teacher used inquiry-based strategies in other content areas. The cooperating teachers with an interest in science instruction provided materials and encouragement to include science in their lessons. The student teachers in grades four and five believed they were unable to teach science to the degree that they desired because they had to prepare students for standardized tests in language arts and math.

Financing School Construction: A Primer.

ERIC Educational Resources Information Center

Sendor, Benjamin B.

1985-01-01

Discusses current school construction needs in North Carolina and methods available under state law to finance construction. To put North Carolina law in perspective, the article also discusses school construction finance procedures used throughout the United States. (Author)

The Impact of Airport Performance towards Construction and Infrastructure Expansion in Indonesia

NASA Astrophysics Data System (ADS)

Laksono, T. D.; Kurniasih, N.; Hasyim, C.; Setiawan, M. I.; Ahmar, A. S.

2018-01-01

Development that is generated from airport areas includes construction and infrastructure development. This research reviews about how the implementation of material management in certain construction project and the relationship between development especially construction and infrastructure development with Airport Performance. The method that is used in this research is mixed method. The population in this research is 297 airports that are existed in Indonesia. From those 297 airports then it is chosen airports that have the most completed data about construction project and it is obtained 148 airports. Based on the coefficient correlation (R) test it is known that construction and infrastructure development has relatively strong relation with airport performance variable, but there are still other factors that influence construction and infrastructure development become bigger effect.

A sampling and classification item selection approach with content balancing.

PubMed

Chen, Pei-Hua

2015-03-01

Existing automated test assembly methods typically employ constrained combinatorial optimization. Constructing forms sequentially based on an optimization approach usually results in unparallel forms and requires heuristic modifications. Methods based on a random search approach have the major advantage of producing parallel forms sequentially without further adjustment. This study incorporated a flexible content-balancing element into the statistical perspective item selection method of the cell-only method (Chen et al. in Educational and Psychological Measurement, 72(6), 933-953, 2012). The new method was compared with a sequential interitem distance weighted deviation model (IID WDM) (Swanson & Stocking in Applied Psychological Measurement, 17(2), 151-166, 1993), a simultaneous IID WDM, and a big-shadow-test mixed integer programming (BST MIP) method to construct multiple parallel forms based on matching a reference form item-by-item. The results showed that the cell-only method with content balancing and the sequential and simultaneous versions of IID WDM yielded results comparable to those obtained using the BST MIP method. The cell-only method with content balancing is computationally less intensive than the sequential and simultaneous versions of IID WDM.

Decision problems in management of construction projects

NASA Astrophysics Data System (ADS)

Szafranko, E.

2017-10-01

In a construction business, one must oftentimes make decisions during all stages of a building process, from planning a new construction project through its execution to the stage of using a ready structure. As a rule, the decision making process is made more complicated due to certain conditions specific for civil engineering. With such diverse decision situations, it is recommended to apply various decision making support methods. Both, literature and hands-on experience suggest several methods based on analytical and computational procedures, some less and some more complex. This article presents the methods which can be helpful in supporting decision making processes in the management of civil engineering projects. These are multi-criteria methods, such as MCE, AHP or indicator methods. Because the methods have different advantages and disadvantages, whereas decision situations have their own specific nature, a brief summary of the methods alongside some recommendations regarding their practical applications has been given at the end of the paper. The main aim of this article is to review the methods of decision support and their analysis for possible use in the construction industry.

Lessons from a Lake.

ERIC Educational Resources Information Center

Goethals, Susan

1997-01-01

Describes a study that included classroom lessons on hydroelectric power, the history and construction of a nearby lake, data recording, the use of field guides, and methods of counting natural populations. The study culminated in a field trip to the lake. (JRH)

Environmental trade-offs of tunnels vs cut-and-cover subways

USGS Publications Warehouse

Walton, M.

1978-01-01

Heavy construction projects in cities entail two kinds of cost - internal cost, which can be defined in terms of payments from one set of parties to another, and external cost, which is the cost borne by the community at large as the result of disutilities entailed in construction and operation. Environmental trade-offs involve external costs, which are commonly difficult to measure. Cut-and-cover subway construction probably entails higher external and internal cost than deep tunnel construction in many urban geological environments, but uncertainty concerning the costs and environmental trade-offs of tunneling leads to limited and timid use of tunneling by American designers. Thus uncertainty becomes a major trade-off which works against tunneling. The reverse is true in Sweden after nearly 30 years of subway construction. Econometric methods for measuring external costs exist in principle, but are limited in application. Economic theory based on market pressure does not address the real problem of urban environmental trade-offs. Nevertheless, the problem of uncertainty can be addressed by comparative studies of estimated and as-built costs of cut-and-cover vs tunnel projects and a review of environmental issues associated with such construction. Such a study would benefit the underground construction industry and the design of transportation systems. It would also help solve an aspect of the urban problem. ?? 1978.

Prevalence, source and severity of work-related injuries among "foreign" construction workers in a large Malaysian organisation: a cross-sectional study.

PubMed

Zerguine, Haroun; Tamrin, Shamsul Bahri Mohd; Jalaludin, Juliana

2018-06-01

Malaysian construction sector is regarded as critical in the field of health because of the high rates of accidents and fatalities. This research aimed to determine the prevalence, sources and severity of injuries and its association with commitment to safety among foreign construction workers. A cross-sectional study was conducted among 323 foreign construction workers from six construction projects of a large organization in Malaysia, using a simple random sampling method. Data was collected using a structured questionnaire to assess work-related injuries and safety commitment. The collected data was analysed by SPSS 22.0 using descriptive statistics and χ 2 test. The prevalence of work-related injuries in a one year period was 22.6%, where most of the injuries were of moderate severity (39.7%) and falls from heights represented the main source (31.5%). The majority of the foreign construction workers had perceived between moderate and high safety commitment, which was significantly associated with work-related injuries. The results also showed a significant association of work-related injuries with the company's interest in Safety and Health, Safety and Health training, and safety equipment. Thus, the implementation of new procedures and providing relevant trainings and safety equipment; will lead to a decrease in injury rates in construction sites.

Principal Component Analysis in Construction of 3D Human Knee Joint Models Using a Statistical Shape Model Method

PubMed Central

Tsai, Tsung-Yuan; Li, Jing-Sheng; Wang, Shaobai; Li, Pingyue; Kwon, Young-Min; Li, Guoan

2013-01-01

The statistical shape model (SSM) method that uses 2D images of the knee joint to predict the 3D joint surface model has been reported in literature. In this study, we constructed a SSM database using 152 human CT knee joint models, including the femur, tibia and patella and analyzed the characteristics of each principal component of the SSM. The surface models of two in vivo knees were predicted using the SSM and their 2D bi-plane fluoroscopic images. The predicted models were compared to their CT joint models. The differences between the predicted 3D knee joint surfaces and the CT image-based surfaces were 0.30 ± 0.81 mm, 0.34 ± 0.79 mm and 0.36 ± 0.59 mm for the femur, tibia and patella, respectively (average ± standard deviation). The computational time for each bone of the knee joint was within 30 seconds using a personal computer. The analysis of this study indicated that the SSM method could be a useful tool to construct 3D surface models of the knee with sub-millimeter accuracy in real time. Thus it may have a broad application in computer assisted knee surgeries that require 3D surface models of the knee. PMID:24156375

Potential Values of Incorporating a Multiple-Choice Question Construction in Physics Experimentation Instruction

NASA Astrophysics Data System (ADS)

Yu, Fu-Yun; Liu, Yu-Hsin

2005-09-01

The potential value of a multiple-choice question-construction instructional strategy for the support of students’ learning of physics experiments was examined in the study. Forty-two university freshmen participated in the study for a whole semester. A constant comparison method adopted to categorize students’ qualitative data indicated that the influences of multiple-choice question construction were evident in several significant ways (promoting constructive and productive studying habits; reflecting and previewing course-related materials; increasing in-group communication and interaction; breaking passive learning style and habits, etc.), which, worked together, not only enhanced students’ comprehension and retention of the obtained knowledge, but also helped distil a sense of empowerment and learning community within the participants. Analysis with one-group t-tests, using 3 as the expected mean, on quantitative data further found that students’ satisfaction toward past learning experience, and perceptions toward this strategy’s potentials for promoting learning were statistically significant at the 0.0005 level, while learning anxiety was not statistically significant. Suggestions for incorporating question-generation activities within classroom and topics for future studies were rendered.

Occupational risk assessment in the construction industry in Iran.

PubMed

Seifi Azad Mard, Hamid Reza; Estiri, Ali; Hadadi, Parinaz; Seifi Azad Mard, Mahshid

2017-12-01

Occupational accidents in the construction industry are more common compared with other fields and these accidents are more severe compared with the global average in developing countries, especially in Iran. Studies which lead to the source of these accidents and suggest solutions for them are therefore valuable. In this study a combination of the failure mode and effects analysis method and fuzzy theory is used as a semi-qualitative-quantitative method for analyzing risks and failure modes. The main causes of occupational accidents in this field were identified and analyzed based on three factors; severity, detection and occurrence. Based on whether the risks are high or low priority, modifying actions were suggested to reduce the occupational risks. Finally, the results showed that high priority risks had a 40% decrease due to these actions.

Thin-layer thermal insulation coatings based on high-filled spheroplastics with polyorganosiloxane binder

NASA Astrophysics Data System (ADS)

Chukhlanov, V. Yu; Selivanov, O. G.; Trifonova, T. A.; Ilina, M. E.; Chukhlanova, N. V.

2017-10-01

Thermal insulation coatings, based on polyorganosiloxane as a binder and hollow glass microspheres, have been studied in this research. The developed materials are widely applied in various branches of science and engineering basically in construction. Components interaction processes are comprehensively studied. Spraying production methods of thin layer thermal insulation coatings have been researched. Ideal technological parameters for polyorganosiloxane coatings hardening depending on components ratio, ambient temperature, solvent and curative concentration have been determined. Stress related characteristics of constructional energy saving materials containing polyorganosiloxane have been researched. Components structure and ratio concerning compound extension strength properties have been revealed. Substantiation of Danneberg model application for the strength characteristics enhancing, when hollow microspheres are introduced, has been suggested. Thermal properties of coating thermal insulation have been studied. To research these characteristics standard methods applying devices IT-S-400 and IT-λ-400 have been chosen. Filler concentration increase was stated to decrease the composition heat conductivity coefficient and to the reduction of temperature dependence of this index. The authors suggested to employ the developed thermal insulation materials for construction and power engineering facilities operating under high temperature and other unfavorable environment.