50 CFR 259.34 - Minimum and maximum deposits; maximum time to deposit.

Code of Federal Regulations, 2010 CFR

2010-10-01

... B objective. A time longer than 10 years, either by original scheduling or by subsequent extension... OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE AID TO FISHERIES CAPITAL CONSTRUCTION FUND...) Minimum annual deposit. The minimum annual (based on each party's taxable year) deposit required by the...

42 CFR 84.175 - Half-mask facepieces, full facepieces, hoods, helmets, and mouthpieces; fit; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Half-mask facepieces, full facepieces, hoods....175 Half-mask facepieces, full facepieces, hoods, helmets, and mouthpieces; fit; minimum requirements. (a) Half-mask facepieces and full facepieces shall be designed and constructed to fit persons with...

40 CFR 60.2945 - Is there a minimum amount of operating parameter monitoring data I must obtain?

Code of Federal Regulations, 2014 CFR

2014-07-01

... Standards of Performance for Other Solid Waste Incineration Units for Which Construction is Commenced After... activities (including, as applicable, calibration checks and required zero and span adjustments of the... municipal or institutional solid waste. (c) If you do not obtain the minimum data required in paragraphs (a...

40 CFR 60.2945 - Is there a minimum amount of operating parameter monitoring data I must obtain?

Code of Federal Regulations, 2013 CFR

2013-07-01

... Standards of Performance for Other Solid Waste Incineration Units for Which Construction is Commenced After... activities (including, as applicable, calibration checks and required zero and span adjustments of the... municipal or institutional solid waste. (c) If you do not obtain the minimum data required in paragraphs (a...

40 CFR 62.14695 - Is there a minimum amount of monitoring data I must obtain?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 8 2011-07-01 2011-07-01 false Is there a minimum amount of monitoring... Commenced Construction On or Before November 30, 1999 Monitoring § 62.14695 Is there a minimum amount of monitoring data I must obtain? (a) Except for monitoring malfunctions, associated repairs, and required...

40 CFR 62.14695 - Is there a minimum amount of monitoring data I must obtain?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 9 2012-07-01 2012-07-01 false Is there a minimum amount of monitoring... Commenced Construction On or Before November 30, 1999 Monitoring § 62.14695 Is there a minimum amount of monitoring data I must obtain? (a) Except for monitoring malfunctions, associated repairs, and required...

40 CFR 62.14695 - Is there a minimum amount of monitoring data I must obtain?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 9 2014-07-01 2014-07-01 false Is there a minimum amount of monitoring... Commenced Construction On or Before November 30, 1999 Monitoring § 62.14695 Is there a minimum amount of monitoring data I must obtain? (a) Except for monitoring malfunctions, associated repairs, and required...

40 CFR 62.14695 - Is there a minimum amount of monitoring data I must obtain?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Is there a minimum amount of monitoring... Commenced Construction On or Before November 30, 1999 Monitoring § 62.14695 Is there a minimum amount of monitoring data I must obtain? (a) Except for monitoring malfunctions, associated repairs, and required...

40 CFR 60.2735 - Is there a minimum amount of monitoring data I must obtain?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Is there a minimum amount of monitoring... Construction On or Before November 30, 1999 Model Rule-Monitoring § 60.2735 Is there a minimum amount of monitoring data I must obtain? (a) Except for monitoring malfunctions, associated repairs, and required...

40 CFR 62.14695 - Is there a minimum amount of monitoring data I must obtain?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 9 2013-07-01 2013-07-01 false Is there a minimum amount of monitoring... Commenced Construction On or Before November 30, 1999 Monitoring § 62.14695 Is there a minimum amount of monitoring data I must obtain? (a) Except for monitoring malfunctions, associated repairs, and required...

7 CFR 3575.65 - Lender's sale or assignment of the guaranteed portion of loan.

Code of Federal Regulations, 2011 CFR

2011-01-01

... guaranteed portion of a loan may not be made prior to full disbursement, completion of construction, and... procedures. (c) Minimum retention. The lender is required to hold in its own portfolio or retain a minimum of...

7 CFR 3575.65 - Lender's sale or assignment of the guaranteed portion of loan.

Code of Federal Regulations, 2010 CFR

2010-01-01

... guaranteed portion of a loan may not be made prior to full disbursement, completion of construction, and... procedures. (c) Minimum retention. The lender is required to hold in its own portfolio or retain a minimum of...

Subdivision Roads : Minimum Construction Standards

DOT National Transportation Integrated Search

2000-01-01

Any person or corporation desiring to construct a new subdivision road which is to be dedicated as public, must submit the following information to the District Engineer for proper evaluation in order to obtain a certificate of approval as required b...

7 CFR 4280.161 - Direct Loan Process.

Code of Federal Regulations, 2011 CFR

2011-01-01

... RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE LOANS AND GRANTS Renewable Energy Systems and Energy... available for direct loans; (2) Applicant and project eligibility criteria; (3) Minimum and maximum loan...; (11) Construction planning and performing development; (12) Requirements after project construction...

Statewide test of construction quality index for pavement software : final report, October 2008.

DOT National Transportation Integrated Search

2008-10-01

All Florida Department of Transportation (FDOT) pavement projects are accepted in accordance with : one or more construction specifications. The purposes of these specifications are to provide guidance : and establish minimum requirements that enable...

Density measurement verification for hot mixed asphalt concrete pavement construction.

DOT National Transportation Integrated Search

2010-06-01

Oregon Department of Transportation (ODOT) requires a minimum density for the construction of dense-graded hot mix asphalt concrete (HMAC) pavements to ensure the likelihood that the pavement will not experience distresses that reduce the expected se...

Density measurement verification for hot mix asphalt concrete pavement construction.

DOT National Transportation Integrated Search

2010-06-01

Oregon Department of Transportation (ODOT) requires a minimum density for the construction of dense-graded hot mix asphalt concrete (HMAC) pavements to ensure the likelihood that the pavement will not experience distresses that reduce the expected se...

Development of Low-Carbon, Copper-Strengthened HSLA Steel Plate for Naval Ship Construction

DTIC Science & Technology

1990-06-01

steel plate microstructures, 2% nital etch . ...................................................... 13 2. Charpy V-notch impact energy transition for...met a minimum yield strength requirement of 80 ksi yield strength through 3/4 inch gage, had high Charpy V-notch impact energy at low tempera- tures...tempered HSLA line-pipe steels, which typically could not meet the minimum Charpy V-notch impact toughness requirement of 35 ft-lb at -1 200 F. In 1984

23 CFR 630.1102 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-04-01

... zone fatalities and injuries to workers and road users by establishing minimum requirements and..., installation and maintenance of temporary traffic control devices, and use of uniformed law enforcement officers during construction, utility, and maintenance operations, and by requiring contract pay items to...

40 CFR 60.2942 - What is the minimum amount of monitoring data I must collect with my continuous emission...

Code of Federal Regulations, 2014 CFR

2014-07-01

... Performance for Other Solid Waste Incineration Units for Which Construction is Commenced After December 9... combusts any municipal or institutional solid waste. (d) If you do not obtain the minimum data required in... alternate methods for collecting data when systems malfunction or when repairs, calibration checks, or zero...

40 CFR 60.2942 - What is the minimum amount of monitoring data I must collect with my continuous emission...

Code of Federal Regulations, 2013 CFR

2013-07-01

... Performance for Other Solid Waste Incineration Units for Which Construction is Commenced After December 9... combusts any municipal or institutional solid waste. (d) If you do not obtain the minimum data required in... alternate methods for collecting data when systems malfunction or when repairs, calibration checks, or zero...

46 CFR 162.028-3 - Requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... which are subjected to pressure, exclusive of the hose, shall be at least five times the maximum working... which will withstand a minimum bursting pressure of 6,000 p.s.i., and a discharge hose or tube which will withstand a minimum bursting pressure of 5,000 p.s.i. The hose shall be constructed with either a...

46 CFR 162.028-3 - Requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... which are subjected to pressure, exclusive of the hose, shall be at least five times the maximum working... which will withstand a minimum bursting pressure of 6,000 p.s.i., and a discharge hose or tube which will withstand a minimum bursting pressure of 5,000 p.s.i. The hose shall be constructed with either a...

46 CFR 162.028-3 - Requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... which are subjected to pressure, exclusive of the hose, shall be at least five times the maximum working... which will withstand a minimum bursting pressure of 6,000 p.s.i., and a discharge hose or tube which will withstand a minimum bursting pressure of 5,000 p.s.i. The hose shall be constructed with either a...

Facility Programming and Construction Criteria [Planning Guide]. 702 KAR 4:170.

ERIC Educational Resources Information Center

Kentucky State Dept. of Education, Frankfort. Div. of Facilities Management.

This facility construction planning guide presents the minimum instructional space standards for Kentucky's public school system. It provides definitions of terms found in the regulations; presents space requirements for every type of instructional space within a public school, including circulation areas, storage, and mechanical/electrical areas;…

49 CFR 178.345-1 - General requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) All specification requirements are minimum requirements. (c) Definitions. See § 178.320(a) for the... flange, or by a fillet weld joining the tank shell to a flange shaped to fit the shell contour. (d) A... be constructed with the cargo tanks made to the same specification or to different specifications...

47 CFR 27.14 - Construction requirements; Criteria for renewal.

Code of Federal Regulations, 2013 CFR

2013-10-01

... at least 40 percent of the license area's population by March 13, 2017, and to at least 75 percent of... a license area by March 13, 2017, and 30 point-to-point links per million persons (one link per 33... minimum of 15 point-to-point links by March 13, 2017, and a minimum of 15 point-to-point links by...

46 CFR 42.13-10 - Freeboards assigned vessels.

Code of Federal Regulations, 2010 CFR

2010-10-01

... apply to every vessel to which a minimum freeboard is assigned. Relaxations from these requirements may... consideration due to design, arrangement, construction materials, propulsive method, or relaxation of...

46 CFR 42.13-10 - Freeboards assigned vessels.

Code of Federal Regulations, 2011 CFR

2011-10-01

... apply to every vessel to which a minimum freeboard is assigned. Relaxations from these requirements may... consideration due to design, arrangement, construction materials, propulsive method, or relaxation of...

40 CFR 146.12 - Construction requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

...; and (B) A cement bond, temperature, or density log after the casing is set and cemented. (ii) For... cement bond, temperature, or density log after the casing is set and cemented. (e) At a minimum, the... water. The casing and cement used in the construction of each newly drilled well shall be designed for...

RECESSED AUTOMATIC SURFACE SKIMMERS FOR SWIMMING POOLS. NATIONAL SANITATION FOUNDATION STANDARD NUMBER 11.

ERIC Educational Resources Information Center

National Sanitation Foundation, Ann Arbor, MI.

THE NATIONAL SANITATION FOUNDATION STANDARD ON SWIMMING POOL EQUIPMENT CONCERNS ITSELF WITH THE SUCCESSFUL APPLICATION OF SURFACE SKIMMERS TO SWIMMING POOLS. THE MINIMUM DESIGN AND CONSTRUCTION REQUIREMENTS ESTABLISHED BY THIS STANDARD ARE SET FORTH TO PROVIDE A MEANS OF EVALUATING THE OVERALL CONSTRUCTION AND EFFECTIVENESS OF THE UNIT. ADDITIONAL…

49 CFR 393.26 - Requirements for reflectors.

Code of Federal Regulations, 2010 CFR

2010-10-01

... case of motor vehicles so constructed that requirement for a 381 mm (15-inch) minimum height above the... used in lieu of reflex reflectors if the material as used on the vehicle, meets the performance... motor vehicle. (3) Such surfaces shall be at least 3 inches from any required lamp or reflector unless...

49 CFR 195.12 - What requirements apply to low-stress pipelines in rural areas?

Code of Federal Regulations, 2014 CFR

2014-10-01

... corresponding to: (A) A stress level equal to or less than 20-percent of the specified minimum yield strength of the line pipe; or (B) If the stress level is unknown or the pipeline is not constructed with steel... of the specified minimum yield strength of the line pipe; or (B) If the stress level is unknown or...

49 CFR 195.12 - What requirements apply to low-stress pipelines in rural areas?

Code of Federal Regulations, 2013 CFR

2013-10-01

... corresponding to: (A) A stress level equal to or less than 20-percent of the specified minimum yield strength of the line pipe; or (B) If the stress level is unknown or the pipeline is not constructed with steel... of the specified minimum yield strength of the line pipe; or (B) If the stress level is unknown or...

49 CFR 195.12 - What requirements apply to low-stress pipelines in rural areas?

Code of Federal Regulations, 2012 CFR

2012-10-01

... corresponding to: (A) A stress level equal to or less than 20-percent of the specified minimum yield strength of the line pipe; or (B) If the stress level is unknown or the pipeline is not constructed with steel... of the specified minimum yield strength of the line pipe; or (B) If the stress level is unknown or...

7 CFR 1710.205 - Minimum approval requirements for all load forecasts.

Code of Federal Regulations, 2013 CFR

2013-01-01

... electronically to RUS computer software applications. RUS will evaluate borrower load forecasts for readability...'s engineering planning documents, such as the construction work plan, incorporate consumer and usage...

7 CFR 1710.205 - Minimum approval requirements for all load forecasts.

Code of Federal Regulations, 2011 CFR

2011-01-01

... electronically to RUS computer software applications. RUS will evaluate borrower load forecasts for readability...'s engineering planning documents, such as the construction work plan, incorporate consumer and usage...

7 CFR 1710.205 - Minimum approval requirements for all load forecasts.

Code of Federal Regulations, 2012 CFR

2012-01-01

... electronically to RUS computer software applications. RUS will evaluate borrower load forecasts for readability...'s engineering planning documents, such as the construction work plan, incorporate consumer and usage...

24 CFR 3280.109 - Room requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... DEVELOPMENT MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS Planning Considerations § 3280.109 Room requirements. (a) Every manufactured home shall have at least one living area with not less than 150 sq. ft. of gross floor area. (b) Rooms designed for sleeping purposes shall have a minimum gross square foot floor...

30 CFR 7.44 - Technical requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... APPROVAL OF MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY Battery Assemblies § 7.44 Technical requirements. (a)(1) Battery boxes and covers constructed of AISI 1010 hot rolled steel shall have the following minimum thicknesses based on the total weight of a unit of the battery assembly charged and ready...

30 CFR 7.44 - Technical requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... APPROVAL OF MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY Battery Assemblies § 7.44 Technical requirements. (a)(1) Battery boxes and covers constructed of AISI 1010 hot rolled steel shall have the following minimum thicknesses based on the total weight of a unit of the battery assembly charged and ready...

42 CFR 84.137 - Inhalation and exhalation valves; check valves; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY... constructed to allow airflow toward the facepiece only shall be provided in the connections to the facepiece...

42 CFR 84.137 - Inhalation and exhalation valves; check valves; minimum requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY... constructed to allow airflow toward the facepiece only shall be provided in the connections to the facepiece...

47 CFR 90.631 - Trunked systems loading, construction and authorization requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... authorization requirements. (a) Non-SMR trunked systems will be authorized on the basis of a loading criteria of... minimum of seventy (70) mobiles for each channel authorized will be placed into operation within five (5...; Washington, DC; Dallas-Fort Worth, TX; Miami, FL; Cleveland, OH; St. Louis, MO; Atlanta, GA; Pittsburgh, PA...

47 CFR 90.631 - Trunked systems loading, construction and authorization requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... authorization requirements. (a) Non-SMR trunked systems will be authorized on the basis of a loading criteria of... minimum of seventy (70) mobiles for each channel authorized will be placed into operation within five (5..., TX; Washington, DC; Dallas-Fort Worth, TX; Miami, FL; Cleveland, OH; St. Louis, MO; Atlanta, GA...

47 CFR 90.631 - Trunked systems loading, construction and authorization requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... authorization requirements. (a) Non-SMR trunked systems will be authorized on the basis of a loading criteria of... minimum of seventy (70) mobiles for each channel authorized will be placed into operation within five (5..., TX; Washington, DC; Dallas-Fort Worth, TX; Miami, FL; Cleveland, OH; St. Louis, MO; Atlanta, GA...

Assessment of codes, by-laws and regulations relating to air wells in building design

NASA Astrophysics Data System (ADS)

Fadzil, Sharifah Fairuz Syed; Karamazaman, Nazli

2017-10-01

Codes and by-laws concerning air well design (for buildings and lavatories) in Malaysia has been established in the Malaysian Uniform Building By-Laws UBBL number 40 (1) and (2) since the 1980s. Wells are there to fulfill the ventilation and daylighting requirements. The minimum well area according to building storey height are compared between UBBL and the Singapore's well requirements from the Building Construction Authority BCA. A visual and graphical representation (with schematics building and well diagrams drawn to scale) of the minimum well sizes and dimensions is given. It can be seen that if the minimum requirement of well size is used for buildings above 8 storeys high, a thin well resulted which is not proportionate to the building height. A proposed dimension is graphed and given to be used in the UBBL which translated to graphics (3 dimensional buildings drawn to scale) created a much better well proportion.

49 CFR 192.309 - Repair of steel pipe.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS General Construction Requirements for Transmission...

30 CFR 18.97 - Inspection of machines; minimum requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... all electrical components for materials, workmanship, design, and construction; (2) Examination of all components of the machine which have been approved or certified under Bureau of Mines Schedule 2D, 2E, 2F, or...

30 CFR 18.97 - Inspection of machines; minimum requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... all electrical components for materials, workmanship, design, and construction; (2) Examination of all components of the machine which have been approved or certified under Bureau of Mines Schedule 2D, 2E, 2F, or...

30 CFR 18.97 - Inspection of machines; minimum requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... all electrical components for materials, workmanship, design, and construction; (2) Examination of all components of the machine which have been approved or certified under Bureau of Mines Schedule 2D, 2E, 2F, or...

42 CFR 84.136 - Facepieces, hoods, and helmets; eyepieces; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

.... (a) Facepieces, hoods, and helmets shall be designed and constructed to provide adequate vision which... suitable material which does not interfere with the vision of the wearer. (2) Shields shall be mounted and...

42 CFR 84.136 - Facepieces, hoods, and helmets; eyepieces; minimum requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

.... (a) Facepieces, hoods, and helmets shall be designed and constructed to provide adequate vision which... suitable material which does not interfere with the vision of the wearer. (2) Shields shall be mounted and...

A system decomposition approach to the design of functional observers

NASA Astrophysics Data System (ADS)

Fernando, Tyrone; Trinh, Hieu

2014-09-01

This paper reports a system decomposition that allows the construction of a minimum-order functional observer using a state observer design approach. The system decomposition translates the functional observer design problem to that of a state observer for a smaller decomposed subsystem. Functional observability indices are introduced, and a closed-form expression for the minimum order required for a functional observer is derived in terms of those functional observability indices.

Reduction of minimum required weight of cementitious materials in WisDOT concrete mixes.

DOT National Transportation Integrated Search

2011-12-01

"This project was designed to explore the feasibility of lowering the cementitious materials content : (CMC) used in Wisconsin concrete pavement construction. The cementitious materials studied included : portland cement, fly ash, and ground granulat...

Reduction of minimum required weight of cementitious materials in WisDOT concrete mixes.

DOT National Transportation Integrated Search

2011-12-01

This project was designed to explore the feasibility of lowering the cementitious materials content : (CMC) used in Wisconsin concrete pavement construction. The cementitious materials studied included : portland cement, fly ash, and ground granulate...

Diagnostic criteria as dysfunction indicators: bridging the chasm between the definition of mental disorder and diagnostic criteria for specific disorders.

PubMed

First, Michael B; Wakefield, Jerome C

2013-12-01

According to the introduction to the Diagnostic and Statistical Manual of Mental Disorders (DSM), Fifth Edition, each disorder must satisfy the definition of mental disorder, which requires the presence of both harm and dysfunction. Constructing criteria sets to require harm is relatively straightforward. However, establishing the presence of dysfunction is necessarily inferential because of the lack of knowledge of internal psychological and biological processes and their functions and dysfunctions. Given that virtually every psychiatric symptom characteristic of a DSM disorder can occur under some circumstances in a normally functioning person, diagnostic criteria based on symptoms must be constructed so that the symptoms indicate an internal dysfunction, and are thus inherently pathosuggestive. In this paper, we review strategies used in DSM criteria sets for increasing the pathosuggestiveness of symptoms to ensure that the disorder meets the requirements of the definition of mental disorder. Strategies include the following: requiring a minimum duration and persistence; requiring that the frequency or intensity of a symptom exceed that seen in normal people; requiring disproportionality of symptoms, given the context; requiring pervasiveness of symptom expression across contexts; adding specific exclusions for contextual scenarios in which symptoms are best understood as normal reactions; combining symptoms to increase cumulative pathosuggestiveness; and requiring enough symptoms from an overall syndrome to meet a minimum threshold of pathosuggestiveness. We propose that future revisions of the DSM consider systematic implementation of these strategies in the construction and revision of criteria sets, with the goal of maximizing the pathosuggestiveness of diagnostic criteria to reduce the potential for diagnostic false positives.

7 CFR 1779.65 - Lender's sale or assignment of the guaranteed portion of loan.

Code of Federal Regulations, 2011 CFR

2011-01-01

... construction, and acquisition of real estate and equipment without the prior written approval of the Agency. If... operating procedures. (c) Minimum retention. The lender is required to hold in its own portfolio or retain a...

30 CFR 780.38 - Support facilities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... COAL MINING AND RECLAMATION OPERATIONS PERMITS AND COAL EXPLORATION SYSTEMS UNDER REGULATORY PROGRAMS SURFACE MINING PERMIT APPLICATIONS-MINIMUM REQUIREMENTS FOR RECLAMATION AND OPERATION PLAN § 780.38... description, plans, and drawings for each support facility to be constructed, used, or maintained within the...

30 CFR 784.30 - Support facilities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... COAL MINING AND RECLAMATION OPERATIONS PERMITS AND COAL EXPLORATION SYSTEMS UNDER REGULATORY PROGRAMS UNDERGROUND MINING PERMIT APPLICATIONS-MINIMUM REQUIREMENTS FOR RECLAMATION AND OPERATION PLAN § 784.30... description, plans, and drawings for each support facility to be constructed, used, or maintained within the...

Electrical Distribution Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This program guide contains the standard electrical distribution curriculum for technical institutes in Georgia. The curriculum encompasses the minimum competencies required for entry-level workers in the electrical distribution field, and in job skills such as construction, maintenance, and repair of overhead and underground electrical…

42 CFR 84.177 - Inhalation and exhalation valves; minimum requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... air from adversely affecting filters, except where filters are specifically designed to resist... DEVICES Non-Powered Air-Purifying Particulate Respirators § 84.177 Inhalation and exhalation valves... external influence; and (3) Designed and constructed to prevent inward leakage of contaminated air. ...

42 CFR 84.177 - Inhalation and exhalation valves; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... air from adversely affecting filters, except where filters are specifically designed to resist... DEVICES Non-Powered Air-Purifying Particulate Respirators § 84.177 Inhalation and exhalation valves... external influence; and (3) Designed and constructed to prevent inward leakage of contaminated air. ...

30 CFR 18.24 - Electrical clearances.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Electrical clearances. 18.24 Section 18.24... APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES Construction and Design Requirements § 18.24 Electrical clearances. Minimum clearances between uninsulated electrical conductor...

30 CFR 18.24 - Electrical clearances.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Electrical clearances. 18.24 Section 18.24... APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES Construction and Design Requirements § 18.24 Electrical clearances. Minimum clearances between uninsulated electrical conductor...

30 CFR 18.24 - Electrical clearances.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Electrical clearances. 18.24 Section 18.24... APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES Construction and Design Requirements § 18.24 Electrical clearances. Minimum clearances between uninsulated electrical conductor...

23 CFR 645.213 - Use and occupancy agreements (permits).

Code of Federal Regulations, 2010 CFR

2010-04-01

... 645.213 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC..., as a minimum, describe the requirements for location, construction, protection of traffic... description of the size, type, nature, and extent of the utility facilities being located within the highway...

23 CFR 645.213 - Use and occupancy agreements (permits).

Code of Federal Regulations, 2011 CFR

2011-04-01

... 645.213 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC..., as a minimum, describe the requirements for location, construction, protection of traffic... description of the size, type, nature, and extent of the utility facilities being located within the highway...

Minimum required capture radius in a coplanar model of the aerial combat problem

NASA Technical Reports Server (NTRS)

Breakwell, J. V.; Merz, A. W.

1977-01-01

Coplanar aerial combat is modeled with constant speeds and specified turn rates. The minimum capture radius which will always permit capture, regardless of the initial conditions, is calculated. This 'critical' capture radius is also the maximum range which the evader can guarantee indefinitely if the initial range, for example, is large. A composite barrier is constructed which gives the boundary, at any heading, of relative positions for which the capture radius is less than critical.

49 CFR 178.705 - Standards for metal IBCs.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... metal lattice-work casing. (c) Construction requirements for metal IBCs are as follows: (1) Body. The... minimum elongation (as a percentage) of the reference steel to be used on fracture under tensile stress...

49 CFR 178.705 - Standards for metal IBCs.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... metal lattice-work casing. (c) Construction requirements for metal IBCs are as follows: (1) Body. The... minimum elongation (as a percentage) of the reference steel to be used on fracture under tensile stress...

9 CFR 3.80 - Primary enclosures.

Code of Federal Regulations, 2011 CFR

2011-01-01

... must be designed and constructed of suitable materials so that they are structurally sound for the... primates are divided into six weight groups for determining minimum space requirements, except that all... in determining a nonhuman primate's weight group unless the animal is obviously unable to make normal...

9 CFR 3.80 - Primary enclosures.

Code of Federal Regulations, 2012 CFR

2012-01-01

... must be designed and constructed of suitable materials so that they are structurally sound for the... primates are divided into six weight groups for determining minimum space requirements, except that all... in determining a nonhuman primate's weight group unless the animal is obviously unable to make normal...

33 CFR 279.10 - Implementation.

Code of Federal Regulations, 2012 CFR

2012-07-01

... boundaries, conduct of regional studies and content and format of report requirements. As a minimum, one... projects with existing use patterns and constructed facilities. (b) Regional studies are prerequisite to... not be restricted either to States or to District hydrologic boundaries. In those cases where a region...

33 CFR 279.10 - Implementation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... boundaries, conduct of regional studies and content and format of report requirements. As a minimum, one... projects with existing use patterns and constructed facilities. (b) Regional studies are prerequisite to... not be restricted either to States or to District hydrologic boundaries. In those cases where a region...

33 CFR 279.10 - Implementation.

Code of Federal Regulations, 2013 CFR

2013-07-01

... boundaries, conduct of regional studies and content and format of report requirements. As a minimum, one... projects with existing use patterns and constructed facilities. (b) Regional studies are prerequisite to... not be restricted either to States or to District hydrologic boundaries. In those cases where a region...

33 CFR 279.10 - Implementation.

Code of Federal Regulations, 2014 CFR

2014-07-01

... boundaries, conduct of regional studies and content and format of report requirements. As a minimum, one... projects with existing use patterns and constructed facilities. (b) Regional studies are prerequisite to... not be restricted either to States or to District hydrologic boundaries. In those cases where a region...

33 CFR 279.10 - Implementation.

Code of Federal Regulations, 2011 CFR

2011-07-01

... boundaries, conduct of regional studies and content and format of report requirements. As a minimum, one... projects with existing use patterns and constructed facilities. (b) Regional studies are prerequisite to... not be restricted either to States or to District hydrologic boundaries. In those cases where a region...

36 CFR Appendix A to Part 1234 - Minimum Security Standards for Level III Federal Facilities

Code of Federal Regulations, 2013 CFR

2013-07-01

... construction projects should be reviewed if possible, to incorporate current technology and blast standards... critical systems (alarm systems, radio communications, computer facilities, etc.) Required. Occupant... all exterior windows (shatter protection) Recommended. Review current projects for blast standards...

49 CFR 192.323 - Casing.

Code of Federal Regulations, 2012 CFR

2012-10-01

... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS General Construction Requirements for Transmission Lines and Mains § 192.323 Casing. Each casing used on a transmission line or main under a railroad or highway must comply with the following: (a) The casing must be designed to withstand the superimposed...

49 CFR 192.323 - Casing.

Code of Federal Regulations, 2014 CFR

2014-10-01

... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS General Construction Requirements for Transmission Lines and Mains § 192.323 Casing. Each casing used on a transmission line or main under a railroad or highway must comply with the following: (a) The casing must be designed to withstand the superimposed...

49 CFR 192.323 - Casing.

Code of Federal Regulations, 2013 CFR

2013-10-01

... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS General Construction Requirements for Transmission Lines and Mains § 192.323 Casing. Each casing used on a transmission line or main under a railroad or highway must comply with the following: (a) The casing must be designed to withstand the superimposed...

Selection of suitable NDT methods for building inspection

NASA Astrophysics Data System (ADS)

Pauzi Ismail, Mohamad

2017-11-01

Construction of modern structures requires good quality concrete with adequate strength and durability. Several accidents occurred in the civil constructions and were reported in the media. Such accidents were due to poor workmanship and lack of systematic monitoring during the constructions. In addition, water leaking and cracking in residential houses was commonly reported too. Based on these facts, monitoring the quality of concrete in structures is becoming more and more important subject. This paper describes major Non-destructive Testing (NDT) methods for evaluating structural integrity of concrete building. Some interesting findings during actual NDT inspections on site are presented. The NDT methods used are explained, compared and discussed. The suitable methods are suggested as minimum NDT methods to cover parameters required in the inspection.

49 CFR 178.705 - Standards for metal IBCs.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY...-work casing. (c) Construction requirements for metal IBCs are as follows: (1) Body. The body must be... minimum elongation (as a percentage) of the reference steel to be used on fracture under tensile stress...

49 CFR 178.705 - Standards for metal IBCs.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY...-work casing. (c) Construction requirements for metal IBCs are as follows: (1) Body. The body must be... minimum elongation (as a percentage) of the reference steel to be used on fracture under tensile stress...

Synthesis of correlation filters: a generalized space-domain approach for improved filter characteristics

NASA Astrophysics Data System (ADS)

Sudharsanan, Subramania I.; Mahalanobis, Abhijit; Sundareshan, Malur K.

1990-12-01

Discrete frequency domain design of Minimum Average Correlation Energy filters for optical pattern recognition introduces an implementational limitation of circular correlation. An alternative methodology which uses space domain computations to overcome this problem is presented. The technique is generalized to construct an improved synthetic discriminant function which satisfies the conflicting requirements of reduced noise variance and sharp correlation peaks to facilitate ease of detection. A quantitative evaluation of the performance characteristics of the new filter is conducted and is shown to compare favorably with the well known Minimum Variance Synthetic Discriminant Function and the space domain Minimum Average Correlation Energy filter, which are special cases of the present design.

Calculation of Appropriate Minimum Size of Isolation Rooms based on Questionnaire Survey of Experts and Analysis on Conditions of Isolation Room Use

NASA Astrophysics Data System (ADS)

Won, An-Na; Song, Hae-Eun; Yang, Young-Kwon; Park, Jin-Chul; Hwang, Jung-Ha

2017-07-01

After the outbreak of the MERS (Middle East Respiratory Syndrome) epidemic, issues were raised regarding response capabilities of medical institutions, including the lack of isolation rooms at hospitals. Since then, the government of Korea has been revising regulations to enforce medical laws in order to expand the operation of isolation rooms and to strengthen standards regarding their mandatory installation at hospitals. Among general and tertiary hospitals in Korea, a total of 159 are estimated to be required to install isolation rooms to meet minimum standards. For the purpose of contributing to hospital construction plans in the future, this study conducted a questionnaire survey of experts and analysed the environment and devices necessary in isolation rooms, to determine their appropriate minimum size to treat patients. The result of the analysis is as follows: First, isolation rooms at hospitals are required to have a minimum 3,300mm minor axis and a minimum 5,000mm major axis for the isolation room itself, and a minimum 1,800mm minor axis for the antechamber where personal protective equipment is donned and removed. Second, the 15 ㎡-or-larger standard for the floor area of isolation rooms will have to be reviewed and standards for the minimum width of isolation rooms will have to be established.

A Study of Undergraduate Admissions to Alabama Colleges and Universities, 1971-72.

ERIC Educational Resources Information Center

Alabama State Commission on Higher Education, Montgomery.

This study examines the undergraduate admission process at Alabama colleges and universities. A questionnaire mailed to officials directing admissions at the 54 public and private colleges and universities in Alabama was constructed to determine: the minimum requirements for undergraduate admission; routine extra-credential considerations; the…

48 CFR 52.228-15 - Performance and Payment Bonds-Construction.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) Definitions. As used in this clause— Original contract price means the award price of the contract; or, for requirements contracts, the price payable for the estimated total quantity; or, for indefinite-quantity contracts, the price payable for the specified minimum quantity. Original contract price does not include...

42 CFR 52b.12 - What are the minimum requirements of construction and equipment?

Code of Federal Regulations, 2014 CFR

2014-10-01

...-8400). (3) ICBO “Uniform Building Code,” Volumes 1-3 (1997). International Conference of Building...-4406). (4) BOCA National Building Code (1996) 1998 Supplement, Building Officials and Code... Southern Building Code Congress (SBCC), 900 Montclair Road, Birmingham, AL 35213-1206 (telephone 205-591...

42 CFR 52b.12 - What are the minimum requirements of construction and equipment?

Code of Federal Regulations, 2012 CFR

2012-10-01

...-8400). (3) ICBO “Uniform Building Code,” Volumes 1-3 (1997). International Conference of Building...-4406). (4) BOCA National Building Code (1996) 1998 Supplement, Building Officials and Code... Southern Building Code Congress (SBCC), 900 Montclair Road, Birmingham, AL 35213-1206 (telephone 205-591...

42 CFR 52b.12 - What are the minimum requirements of construction and equipment?

Code of Federal Regulations, 2013 CFR

2013-10-01

...-8400). (3) ICBO “Uniform Building Code,” Volumes 1-3 (1997). International Conference of Building...-4406). (4) BOCA National Building Code (1996) 1998 Supplement, Building Officials and Code... Southern Building Code Congress (SBCC), 900 Montclair Road, Birmingham, AL 35213-1206 (telephone 205-591...

25 CFR 256.22 - How can I be sure that the work that is being done on my dwelling meets minimum construction...

Code of Federal Regulations, 2012 CFR

2012-04-01

... construction, a trained and qualified servicing housing office representative or building inspector will review the construction to ensure that it meets applicable minimum construction standards and building codes...

25 CFR 256.22 - How can I be sure that the work that is being done on my dwelling meets minimum construction...

Code of Federal Regulations, 2013 CFR

2013-04-01

... construction, a trained and qualified servicing housing office representative or building inspector will review the construction to ensure that it meets applicable minimum construction standards and building codes...

25 CFR 256.22 - How can I be sure that the work that is being done on my dwelling meets minimum construction...

Code of Federal Regulations, 2014 CFR

2014-04-01

... construction, a trained and qualified servicing housing office representative or building inspector will review the construction to ensure that it meets applicable minimum construction standards and building codes...

25 CFR 256.22 - How can I be sure that the work that is being done on my dwelling meets minimum construction...

Code of Federal Regulations, 2011 CFR

2011-04-01

... construction, a trained and qualified servicing housing office representative or building inspector will review the construction to ensure that it meets applicable minimum construction standards and building codes...

25 CFR 256.22 - How can I be sure that the work that is being done on my dwelling meets minimum construction...

Code of Federal Regulations, 2010 CFR

2010-04-01

... construction, a trained and qualified servicing housing office representative or building inspector will review the construction to ensure that it meets applicable minimum construction standards and building codes...

Measurement of visibility from the pilot's cockpit on different airplane types

NASA Technical Reports Server (NTRS)

Kurz, Gerhard

1931-01-01

A process for the measurement of the visibility of airplanes from the pilot's cockpit is developed. The apparatus necessary for the measurements was suitably constructed and measurements of the fields of vision were made with it. The visibilities of six airplanes of different types of construction and use were measured, as well as the visibility of an automobile for comparison. An attempt was made to establish minimum visibility requirements and to express the excellence of visibility by means of a numerical coefficient.

33 CFR Appendix A to Part 154 - Guidelines for Detonation Flame Arresters

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CG-522). 1. Scope 1.1This standard provides the minimum requirements for design, construction.../Circ. 373/Rev. 1—Revised Standards for the Design, Testing and Locating of Devices to Prevent the... maximum design pressure drop for that maximum flow rate. 6.1.10Maximum operating pressure. 7. Materials 7...

Guidelines for Environmental Design in Schools (Revision of Design Note 17). Building Bulletin 87.

ERIC Educational Resources Information Center

Orlowski, Raf; Loe, David; Watson, Newton; Rowlands, Edward; Mansfield, Kevin; Venning, Bob; Seager, Andrew; Minikin, John; Hobday, Richard; Palmer, John

Both existing and new English school premises are required by law to comply with minimum construction standards published by the Department for Education and Employment. This building bulletin provides practical guidance on meeting these standards covering acoustics, lighting, heating and thermal performance, ventilation, water supplies, and…

Facilities Standards and Planning Manual for New Jersey County Community Colleges.

ERIC Educational Resources Information Center

New Jersey State Dept. of Higher Education, Trenton. Office of Community Coll. Programs.

After some general comments concerning all guidelines, planning standards are described for--(1) various types of new facilities, (2) expansion of present facilities, (3) minimum space requirements for a college, (4) net-to-gross space ratios, and (5) total project costs. Information regarding capital construction project submissions procedure is…

33 CFR Appendix B to Part 154 - Standard Specification for Tank Vent Flame Arresters

Code of Federal Regulations, 2012 CFR

2012-07-01

... 1.1This standard provides the minimum requirements for design, construction, performance and testing... with a maximum experimental safe gap (MESG) below 0.9 millimeters. Flame arresters protecting such... Design, Testing and Locating of Devices to Prevent the Passage of Flame into Cargo Tanks in Tankers. 3.3...

33 CFR Appendix B to Part 154 - Standard Specification for Tank Vent Flame Arresters

Code of Federal Regulations, 2011 CFR

2011-07-01

... 1.1This standard provides the minimum requirements for design, construction, performance and testing... with a maximum experimental safe gap (MESG) below 0.9 millimeters. Flame arresters protecting such... Design, Testing and Locating of Devices to Prevent the Passage of Flame into Cargo Tanks in Tankers. 3.3...

33 CFR Appendix B to Part 154 - Standard Specification for Tank Vent Flame Arresters

Code of Federal Regulations, 2013 CFR

2013-07-01

... 1.1This standard provides the minimum requirements for design, construction, performance and testing... with a maximum experimental safe gap (MESG) below 0.9 millimeters. Flame arresters protecting such... Design, Testing and Locating of Devices to Prevent the Passage of Flame into Cargo Tanks in Tankers. 3.3...

33 CFR Appendix B to Part 154 - Standard Specification for Tank Vent Flame Arresters

Code of Federal Regulations, 2010 CFR

2010-07-01

... 1.1This standard provides the minimum requirements for design, construction, performance and testing... with a maximum experimental safe gap (MESG) below 0.9 millimeters. Flame arresters protecting such... Design, Testing and Locating of Devices to Prevent the Passage of Flame into Cargo Tanks in Tankers. 3.3...

Round timbers and ties

Treesearch

Ronald W. Wolfe

1999-01-01

Round timbers and ties represent some of the most efficient uses of our forest resources. They require a minimum of processing between harvesting the tree and marketing the structural commodity. Poles and piles are debarked or peeled, seasoned, and often treated with preservative prior to use as structural members. Construction logs are usually shaped to facilitate...

30 CFR 780.37 - Road systems.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Road systems. 780.37 Section 780.37 Mineral... MINING PERMIT APPLICATIONS-MINIMUM REQUIREMENTS FOR RECLAMATION AND OPERATION PLAN § 780.37 Road systems... plans and drawings for each road, as defined in § 701.5 of this chapter, to be constructed, used, or...

30 CFR 784.24 - Road systems.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Road systems. 784.24 Section 784.24 Mineral... UNDERGROUND MINING PERMIT APPLICATIONS-MINIMUM REQUIREMENTS FOR RECLAMATION AND OPERATION PLAN § 784.24 Road... shall submit plans and drawings for each road, as defined in § 701.5 of this chapter, to be constructed...

30 CFR 784.24 - Road systems.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Road systems. 784.24 Section 784.24 Mineral... UNDERGROUND MINING PERMIT APPLICATIONS-MINIMUM REQUIREMENTS FOR RECLAMATION AND OPERATION PLAN § 784.24 Road... shall submit plans and drawings for each road, as defined in § 701.5 of this chapter, to be constructed...

30 CFR 780.37 - Road systems.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Road systems. 780.37 Section 780.37 Mineral... MINING PERMIT APPLICATIONS-MINIMUM REQUIREMENTS FOR RECLAMATION AND OPERATION PLAN § 780.37 Road systems... plans and drawings for each road, as defined in § 701.5 of this chapter, to be constructed, used, or...

14 CFR 77.9 - Construction or alteration requiring notice.

Code of Federal Regulations, 2013 CFR

2013-01-01

... section. (c) Any highway, railroad, or other traverse way for mobile objects, of a height which, if... Interstate Highways where overcrossings are designed for a minimum of 17 feet vertical distance, 15 feet for any other public roadway, 10 feet or the height of the highest mobile object that would normally...

14 CFR 77.9 - Construction or alteration requiring notice.

Code of Federal Regulations, 2014 CFR

2014-01-01

... section. (c) Any highway, railroad, or other traverse way for mobile objects, of a height which, if... Interstate Highways where overcrossings are designed for a minimum of 17 feet vertical distance, 15 feet for any other public roadway, 10 feet or the height of the highest mobile object that would normally...

14 CFR 77.9 - Construction or alteration requiring notice.

Code of Federal Regulations, 2012 CFR

2012-01-01

... section. (c) Any highway, railroad, or other traverse way for mobile objects, of a height which, if... Interstate Highways where overcrossings are designed for a minimum of 17 feet vertical distance, 15 feet for any other public roadway, 10 feet or the height of the highest mobile object that would normally...

Rules and Regulations: Minimum Schoolhouse Construction Standards.

ERIC Educational Resources Information Center

Arkansas State Dept. of Education, Little Rock.

Regulatory guidelines governing the minimum schoolhouse construction standards as well as rules for new construction applications, school site selection, and approval procedures are presented. Appendices (comprising 95 percent of the publication) document the following: educational space guidelines; planning for modern education; school…

Scanning mirror for infrared sensors

NASA Technical Reports Server (NTRS)

Anderson, R. H.; Bernstein, S. B.

1972-01-01

A high resolution, long life angle-encoded scanning mirror, built for application in an infrared attitude sensor, is described. The mirror uses a Moire' fringe type optical encoder and unique torsion bar suspension together with a magnetic drive to meet stringent operational and environmental requirements at a minimum weight and with minimum power consumption. Details of the specifications, design, and construction are presented with an analysis of the mirror suspension that allows accurate prediction of performance. The emphasis is on mechanical design considerations, and brief discussions are included on the encoder and magnetic drive to provide a complete view of the mirror system and its capabilities.

2 CFR Appendix A to Part 215 - Contract Provisions

Code of Federal Regulations, 2012 CFR

2012-01-01

..., contractors shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...

34 CFR Appendix A to Part 74 - Contract Provisions

Code of Federal Regulations, 2014 CFR

2014-07-01

... shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...

7 CFR Appendix A to Part 3019 - Contract Provisions

Code of Federal Regulations, 2013 CFR

2013-01-01

..., contractors shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...

36 CFR Appendix A to Part 1210 - Contract Provisions

Code of Federal Regulations, 2012 CFR

2012-07-01

... shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2,500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...

36 CFR Appendix A to Part 1210 - Contract Provisions

Code of Federal Regulations, 2014 CFR

2014-07-01

... shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2,500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...

34 CFR Appendix A to Part 74 - Contract Provisions

Code of Federal Regulations, 2013 CFR

2013-07-01

... shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...

34 CFR Appendix A to Part 74 - Contract Provisions

Code of Federal Regulations, 2012 CFR

2012-07-01

... shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...

7 CFR Appendix A to Part 3019 - Contract Provisions

Code of Federal Regulations, 2014 CFR

2014-01-01

..., contractors shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...

2 CFR Appendix A to Part 215 - Contract Provisions

Code of Federal Regulations, 2013 CFR

2013-01-01

..., contractors shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...

7 CFR Appendix A to Part 3019 - Contract Provisions

Code of Federal Regulations, 2012 CFR

2012-01-01

..., contractors shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...

AMERICAN STANDARD SPECIFICATIONS FOR MAKING BUILDINGS AND FACILITIES ACCESSIBLE TO, AND USABLE BY, THE PHYSICALLY HANDICAPPED.

ERIC Educational Resources Information Center

National Easter Seal Society for Crippled Children and Adults, Chicago, IL.

THIS STANDARD IS INTENDED TO PROVIDE MINIMUM REQUIREMENTS TO BE USED IN THE CONSTRUCTION OF ALL BUILDINGS AND FACILITIES AND FOR ADOPTION AND ENFORCEMENT BY ADMINISTRATIVE AUTHORITIES IN ORDER TO ALLOW INDIVIDUALS WITH PERMANENT PHYSICAL DISABILITIES TO PURSUE THEIR INTERESTS AND ASPIRATIONS, DEVELOP THEIR TALENTS, AND EXERCISE THEIR SKILLS.…

33 CFR Appendix A to Part 154 - Guidelines for Detonation Flame Arresters

Code of Federal Regulations, 2011 CFR

2011-07-01

... approaching from either direction, or 14.3.5.2The design of the device is symmetrical where each end may be... (CG-522). 1. Scope 1.1This standard provides the minimum requirements for design, construction.../Circ. 373/Rev. 1—Revised Standards for the Design, Testing and Locating of Devices to Prevent the...

33 CFR Appendix A to Part 154 - Guidelines for Detonation Flame Arresters

Code of Federal Regulations, 2014 CFR

2014-07-01

... approaching from either direction, or 14.3.5.2The design of the device is symmetrical where each end may be... (CG-522). 1. Scope 1.1This standard provides the minimum requirements for design, construction.../Circ. 373/Rev. 1—Revised Standards for the Design, Testing and Locating of Devices to Prevent the...

33 CFR Appendix A to Part 154 - Guidelines for Detonation Flame Arresters

Code of Federal Regulations, 2012 CFR

2012-07-01

... approaching from either direction, or 14.3.5.2The design of the device is symmetrical where each end may be... (CG-522). 1. Scope 1.1This standard provides the minimum requirements for design, construction.../Circ. 373/Rev. 1—Revised Standards for the Design, Testing and Locating of Devices to Prevent the...

33 CFR Appendix A to Part 154 - Guidelines for Detonation Flame Arresters

Code of Federal Regulations, 2013 CFR

2013-07-01

... approaching from either direction, or 14.3.5.2The design of the device is symmetrical where each end may be... (CG-522). 1. Scope 1.1This standard provides the minimum requirements for design, construction.../Circ. 373/Rev. 1—Revised Standards for the Design, Testing and Locating of Devices to Prevent the...

75 FR 50930 - Final Determination To Approve Alternative Final Cover Request for the Lake County, Montana Landfill

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-18

... infiltration and erosion. The regulation requires final cover systems to be designed and constructed to: (1... infiltration through the closed MSWLF by the use of an infiltration layer that contains a minimum of 18 inches... that includes: (1) An infiltration layer that achieves an equivalent reduction in infiltration as the...

76 FR 67759 - Announcement of Funding Awards for the Self-Help Homeownership Opportunity Program (SHOP) for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-02

... contribute a minimum of 100 hours of sweat equity on the construction of their homes and/or the homes of other homebuyers participating in the local self-help housing program. Sweat equity can include, but is... required. The SHOP funds together with the sweat equity and volunteer labor contributions significantly...

75 FR 62849 - Announcement of Funding Awards for the Self-Help Homeownership Opportunity Program (SHOP) for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-13

... homebuyers contribute a minimum of 100 hours of sweat equity on the construction of their homes and/or the homes of other homebuyers participating in the local self-help housing program. Sweat equity can include... labor is also required. The SHOP funds together with the sweat equity and volunteer labor contributions...

76 FR 48876 - Announcement of Funding Awards for the Self-Help Homeownership Opportunity Program (SHOP) for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-09

... homebuyers contribute a minimum of 100 hours of sweat equity on the construction of their homes and/or the homes of other homebuyers participating in the local self-help housing program. Sweat equity can include... labor is also required. The SHOP funds together with the sweat equity and volunteer labor contributions...

7 CFR 56.76 - Minimum facility and operating requirements for shell egg grading and packing plants.

Code of Federal Regulations, 2010 CFR

2010-01-01

... or rodents. (3) Buildings shall be of sound construction so as to prevent, insofar as practicable... cleaned at the end of each operating day. (5) The floors, walls, ceilings, partitions, and other parts of... reflection of light that interfere with, or prohibit the accurate quality determination of eggs in the...

7 CFR 56.76 - Minimum facility and operating requirements for shell egg grading and packing plants.

Code of Federal Regulations, 2012 CFR

2012-01-01

... or rodents. (3) Buildings shall be of sound construction so as to prevent, insofar as practicable... cleaned at the end of each operating day. (5) The floors, walls, ceilings, partitions, and other parts of... reflection of light that interfere with, or prohibit the accurate quality determination of eggs in the...

7 CFR 56.76 - Minimum facility and operating requirements for shell egg grading and packing plants.

Code of Federal Regulations, 2011 CFR

2011-01-01

... or rodents. (3) Buildings shall be of sound construction so as to prevent, insofar as practicable... cleaned at the end of each operating day. (5) The floors, walls, ceilings, partitions, and other parts of... reflection of light that interfere with, or prohibit the accurate quality determination of eggs in the...

7 CFR 56.76 - Minimum facility and operating requirements for shell egg grading and packing plants.

Code of Federal Regulations, 2014 CFR

2014-01-01

... or rodents. (3) Buildings shall be of sound construction so as to prevent, insofar as practicable... cleaned at the end of each operating day. (5) The floors, walls, ceilings, partitions, and other parts of... reflection of light that interfere with, or prohibit the accurate quality determination of eggs in the...

7 CFR 56.76 - Minimum facility and operating requirements for shell egg grading and packing plants.

Code of Federal Regulations, 2013 CFR

2013-01-01

... or rodents. (3) Buildings shall be of sound construction so as to prevent, insofar as practicable... cleaned at the end of each operating day. (5) The floors, walls, ceilings, partitions, and other parts of... reflection of light that interfere with, or prohibit the accurate quality determination of eggs in the...

Effects of State Policies on Facilities Planning and Construction in Rural Districts. ERIC Digest.

ERIC Educational Resources Information Center

Lawrence, Barbara Kent

State policies greatly affect the decisions rural districts make about building or renovating school facilities. State, federal, and local mechanisms for funding school facilities are briefly described. Some states require a specific percentage of growth or decline in student population or a minimum number of students as a prerequisite for…

Benchmarking Dutch and U.S. Naval Shipbuilding: Reducing U.S. Naval Shipbuilding Costs Using Collaborative PLM and 3D Imaging

DTIC Science & Technology

2012-11-02

Scanning Technology (3D LST) and Collaborative Product Lifecycle Management (CPLM) are two technologies that are currently being leveraged by international ... international ship construction organizations to achieve significant cost savings. 3D LST dramatically reduces the time required to scan ship surfaces as...technology does not meet the accuracy requirements, 0.030” accuracy minimum , for naval shipbuilding. The report delivered to the CSNT shows that if the

How Much Is Enough? Involving Occupational Experts in Setting Standards on a Specific-Purpose Language Test for Health Professionals

ERIC Educational Resources Information Center

Pill, John; McNamara, Tim

2016-01-01

This paper considers how to establish the minimum required level of professionally relevant oral communication ability in the medium of English for health practitioners with English as an additional language (EAL) to gain admission to practice in jurisdictions where English is the dominant language. A theoretical concern is the construct of…

18 CFR Appendix A to Part 380 - Minimum Filing Requirements for Environmental Reports Under the Natural Gas Act

Code of Federal Regulations, 2010 CFR

2010-04-01

... provide sufficient comparative data to justify the selection of the proposed route. (§ 380.12(l)(2)(ii)) 5... sufficient comparative data to justify the selection of the proposed site. (§ 380.12(l)(2)(ii)) Resource Report 11—Reliability and Safety Describe how the project facilities would be designed, constructed...

18 CFR Appendix A to Part 380 - Minimum Filing Requirements for Environmental Reports Under the Natural Gas Act

Code of Federal Regulations, 2012 CFR

2012-04-01

... provide sufficient comparative data to justify the selection of the proposed route. (§ 380.12(l)(2)(ii)) 5... sufficient comparative data to justify the selection of the proposed site. (§ 380.12(l)(2)(ii)) Resource Report 11—Reliability and Safety Describe how the project facilities would be designed, constructed...

18 CFR Appendix A to Part 380 - Minimum Filing Requirements for Environmental Reports Under the Natural Gas Act

Code of Federal Regulations, 2014 CFR

2014-04-01

... provide sufficient comparative data to justify the selection of the proposed route. (§ 380.12(l)(2)(ii)) 5... sufficient comparative data to justify the selection of the proposed site. (§ 380.12(l)(2)(ii)) Resource Report 11—Reliability and Safety Describe how the project facilities would be designed, constructed...

18 CFR Appendix A to Part 380 - Minimum Filing Requirements for Environmental Reports Under the Natural Gas Act

Code of Federal Regulations, 2013 CFR

2013-04-01

... provide sufficient comparative data to justify the selection of the proposed route. (§ 380.12(l)(2)(ii)) 5... sufficient comparative data to justify the selection of the proposed site. (§ 380.12(l)(2)(ii)) Resource Report 11—Reliability and Safety Describe how the project facilities would be designed, constructed...

18 CFR Appendix A to Part 380 - Minimum Filing Requirements for Environmental Reports Under the Natural Gas Act

Code of Federal Regulations, 2011 CFR

2011-04-01

... provide sufficient comparative data to justify the selection of the proposed route. (§ 380.12(l)(2)(ii)) 5... sufficient comparative data to justify the selection of the proposed site. (§ 380.12(l)(2)(ii)) Resource Report 11—Reliability and Safety Describe how the project facilities would be designed, constructed...

41 CFR Appendix A to Part 105 - 72-Contract Provisions

Code of Federal Regulations, 2013 CFR

2013-07-01

... required to pay wages to laborers and mechanics at a rate not less than the minimum wages specified in a... construction contracts and in excess of $2500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...

49 CFR Appendix A to Part 19 - Contract Provisions

Code of Federal Regulations, 2013 CFR

2013-10-01

..., contractors shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2,500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...

41 CFR Appendix A to Part 105 - 72-Contract Provisions

Code of Federal Regulations, 2012 CFR

2012-01-01

... required to pay wages to laborers and mechanics at a rate not less than the minimum wages specified in a... construction contracts and in excess of $2500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...

10 CFR Appendix A to Subpart B of... - Contract Provisions

Code of Federal Regulations, 2012 CFR

2012-01-01

..., contractors shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...

10 CFR Appendix A to Subpart B of... - Contract Provisions

Code of Federal Regulations, 2013 CFR

2013-01-01

..., contractors shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...

41 CFR Appendix A to Part 105 - 72-Contract Provisions

Code of Federal Regulations, 2014 CFR

2014-01-01

... required to pay wages to laborers and mechanics at a rate not less than the minimum wages specified in a... construction contracts and in excess of $2500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...

49 CFR Appendix A to Part 19 - Contract Provisions

Code of Federal Regulations, 2012 CFR

2012-10-01

..., contractors shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2,500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...

49 CFR Appendix A to Part 19 - Contract Provisions

Code of Federal Regulations, 2014 CFR

2014-10-01

..., contractors shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2,500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...

22 CFR Appendix A to Part 518 - Contract Provisions

Code of Federal Regulations, 2014 CFR

2014-04-01

..., contractors shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2,500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...

10 CFR Appendix A to Subpart B of... - Contract Provisions

Code of Federal Regulations, 2014 CFR

2014-01-01

..., contractors shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...

47 CFR 27.14 - Construction requirements; Criteria for renewal.

Code of Federal Regulations, 2014 CFR

2014-10-01

...'s population by March 13, 2017, and to at least 75 percent of the license area's population by...-point links per million persons (one link per 67,000 persons) in a license area by March 13, 2017, and...-point links by March 13, 2017, and a minimum of 15 point-to-point links by September 13, 2019. (4) Under...

Modelling machine ensembles with discrete event dynamical system theory

NASA Technical Reports Server (NTRS)

Hunter, Dan

1990-01-01

Discrete Event Dynamical System (DEDS) theory can be utilized as a control strategy for future complex machine ensembles that will be required for in-space construction. The control strategy involves orchestrating a set of interactive submachines to perform a set of tasks for a given set of constraints such as minimum time, minimum energy, or maximum machine utilization. Machine ensembles can be hierarchically modeled as a global model that combines the operations of the individual submachines. These submachines are represented in the global model as local models. Local models, from the perspective of DEDS theory , are described by the following: a set of system and transition states, an event alphabet that portrays actions that takes a submachine from one state to another, an initial system state, a partial function that maps the current state and event alphabet to the next state, and the time required for the event to occur. Each submachine in the machine ensemble is presented by a unique local model. The global model combines the local models such that the local models can operate in parallel under the additional logistic and physical constraints due to submachine interactions. The global model is constructed from the states, events, event functions, and timing requirements of the local models. Supervisory control can be implemented in the global model by various methods such as task scheduling (open-loop control) or implementing a feedback DEDS controller (closed-loop control).

Quality Characteristics of Appalachian Red Oak Lumber

Treesearch

Janice K Wiedenbeck; Charles J. Gatchell; Elizabeth S. Walker

1995-01-01

Red oak lumber defect information derived from a well-constructed board data bank was analyzed. The potential utility of No. 1 Common and No. 2A Common lumber is indicated by the finding that 23 percent of the No. 1 Common boards and 35 percent of the No. 2A Common boards in the data bank contain clear-face cutting percentages that meet the minimum requirement for the...

Rate-Compatible LDPC Codes with Linear Minimum Distance

NASA Technical Reports Server (NTRS)

Divsalar, Dariush; Jones, Christopher; Dolinar, Samuel

2009-01-01

A recently developed method of constructing protograph-based low-density parity-check (LDPC) codes provides for low iterative decoding thresholds and minimum distances proportional to block sizes, and can be used for various code rates. A code constructed by this method can have either fixed input block size or fixed output block size and, in either case, provides rate compatibility. The method comprises two submethods: one for fixed input block size and one for fixed output block size. The first mentioned submethod is useful for applications in which there are requirements for rate-compatible codes that have fixed input block sizes. These are codes in which only the numbers of parity bits are allowed to vary. The fixed-output-blocksize submethod is useful for applications in which framing constraints are imposed on the physical layers of affected communication systems. An example of such a system is one that conforms to one of many new wireless-communication standards that involve the use of orthogonal frequency-division modulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Loef, P.A.; Smed, T.; Andersson, G.

The minimum singular value of the power flow Jacobian matrix has been used as a static voltage stability index, indicating the distance between the studied operating point and the steady state voltage stability limit. In this paper a fast method to calculate the minimum singular value and the corresponding (left and right) singular vectors is presented. The main advantages of the developed algorithm are the small amount of computation time needed, and that it only requires information available from an ordinary program for power flow calculations. Furthermore, the proposed method fully utilizes the sparsity of the power flow Jacobian matrixmore » and hence the memory requirements for the computation are low. These advantages are preserved when applied to various submatrices of the Jacobian matrix, which can be useful in constructing special voltage stability indices. The developed algorithm was applied to small test systems as well as to a large (real size) system with over 1000 nodes, with satisfactory results.« less

The production route selection algorithm in virtual manufacturing networks

NASA Astrophysics Data System (ADS)

Krenczyk, D.; Skolud, B.; Olender, M.

2017-08-01

The increasing requirements and competition in the global market are challenges for the companies profitability in production and supply chain management. This situation became the basis for construction of virtual organizations, which are created in response to temporary needs. The problem of the production flow planning in virtual manufacturing networks is considered. In the paper the algorithm of the production route selection from the set of admissible routes, which meets the technology and resource requirements and in the context of the criterion of minimum cost is proposed.

46 CFR 116.415 - Fire control boundaries.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 2 (0.5 pounds per square foot) must be minimum A-0 Class construction. 2 Toilet space boundaries may... various spaces must meet the requirements of Table 116.415(b). Table 116.415 (b)—Bulkheads Spaces (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) Control Space (1) B-0 A-0 A-0 A-0 A-15 A-60 A-60 A-0...

46 CFR 116.415 - Fire control boundaries.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 2 (0.5 pounds per square foot) must be minimum A-0 Class construction. 2 Toilet space boundaries may... various spaces must meet the requirements of Table 116.415(b). Table 116.415 (b)—Bulkheads Spaces (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) Control Space (1) B-0 A-0 A-0 A-0 A-15 A-60 A-60 A-0...

46 CFR 116.415 - Fire control boundaries.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 2 (0.5 pounds per square foot) must be minimum A-0 Class construction. 2 Toilet space boundaries may... various spaces must meet the requirements of Table 116.415(b). Table 116.415 (b)—Bulkheads Spaces (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) Control Space (1) B-0 A-0 A-0 A-0 A-15 A-60 A-60 A-0...

People’s Republic of China Scientific Abstracts, Number 173.

DTIC Science & Technology

1977-08-03

ABSTRACT: The quickened pace in socialist construction in recent years and the increased demand for sandarac varnish as a wood primer and paint solvent...good thinner—mixes well with other varnishes and lacquers. Moreover, its environmental pollution and capital outlay are low, requiring minimum...reaction in manufacture, and the varnishing properties of the new resin in detail. 5292 CSO: 4009 GENETICS AND BREEDING AUTHOR: None ORG

49 CFR 178.356-2 - Materials of construction and other requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... bottom section and 0.16 g/cc (10 pcf) minimum for top section, except 0.1 g/cc (6.5 pcf) for the... encapsulated by the foam. (d) Vent holes 5 mm (0.2-inch) diameter must be drilled in the outer shell to provide... fusion welding process in accordance with American Welding Society Codes B-3.0 and D-1.0 (IBR, see § 171...

49 CFR 178.356-2 - Materials of construction and other requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... bottom section and 0.16 g/cc (10 pcf) minimum for top section, except 0.1 g/cc (6.5 pcf) for the... encapsulated by the foam. (d) Vent holes 5 mm (0.2-inch) diameter must be drilled in the outer shell to provide... fusion welding process in accordance with American Welding Society Codes B-3.0 and D-1.0 (IBR, see § 171...

49 CFR 178.356-2 - Materials of construction and other requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... bottom section and 0.16 g/cc (10 pcf) minimum for top section, except 0.1 g/cc (6.5 pcf) for the... encapsulated by the foam. (d) Vent holes 5 mm (0.2-inch) diameter must be drilled in the outer shell to provide... fusion welding process in accordance with American Welding Society Codes B-3.0 and D-1.0 (IBR, see § 171...

49 CFR 178.358-2 - Materials of construction and other requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... any joint in the shell. (e) Vent holes 5 mm (0.2-inch) diameter must be drilled in the outer shell to... Society Codes B-3.0 and D-1.0 (IBR, see § 171.7 of this subchapter). Body seams and joints for the liner... 14 cm (5.5-inch) minimum thickness of foam must be provided over the entire liner except where: (1...

Literature review of the benefits and obstacle of horizontal directional drilling

NASA Astrophysics Data System (ADS)

Norizam, M. S. Mohd; Nuzul Azam, H.; Helmi Zulhaidi, S.; Aziz, A. Abdul; Nadzrol Fadzilah, A.

2017-11-01

In this new era the construction industry not only need to be completed within budget, timely, at acceptable quality and safety but the stakeholders especially the local authorities and the public realises for the important need of sustainable construction method to be used for our younger generation to heritage if not better a safer world for them to live and raise up their children’s. Horizontal Directional Drilling method is the most commonly recognised trenchless utilities method as a preferred construction method in this age. Among the reasons HDD method offers less disturbance on traffic, the public, business activities and neighbourhood, lower restoration cost, less noise, dust and minimum import/export of the construction materials. In addition HDD method can drill through congested utilities areas with minimum cutting and shorter time. This paper aims to appraise the benefits and obstacle of HDD method in construction industry. It is an endeavour to fulfil the local authorities cry for alternative method that less damages to the roads, road furniture’s and public complaints compared to the conventional open cut method. In addition HDD method is seem to be in line with sustainable development requirements e.g. reduce, reuse, recycle and etc. Hence, it is important to determine the benefits and obstacle factors of HDD implementation. The factors are based on the literature review conducted by the author on the subject matters gathered from previous studies, journals, text books, guidelines, magazine articles, newspaper cutting and etc.

Statistical Requirements For Pass-Fail Testing Of Contraband Detection Systems

NASA Astrophysics Data System (ADS)

Gilliam, David M.

2011-06-01

Contraband detection systems for homeland security applications are typically tested for probability of detection (PD) and probability of false alarm (PFA) using pass-fail testing protocols. Test protocols usually require specified values for PD and PFA to be demonstrated at a specified level of statistical confidence CL. Based on a recent more theoretical treatment of this subject [1], this summary reviews the definition of CL and provides formulas and spreadsheet functions for constructing tables of general test requirements and for determining the minimum number of tests required. The formulas and tables in this article may be generally applied to many other applications of pass-fail testing, in addition to testing of contraband detection systems.

The use of a tripolar articulation in revision total hip arthroplasty: a minimum of 24 months' follow-up.

PubMed

Levine, Brett R; Della Valle, Craig J; Deirmengian, Carl A; Breien, Kristoffer M; Weeden, Steven H; Sporer, Scott M; Paprosky, Wayne G

2008-12-01

A retrospective cohort study of 31 hips revised with a tripolar articular construct was performed. Patient demographics and preoperative and postoperative information were recorded. Indications for a tripolar construct were recurrent dislocation and the inability to attain intraoperative stability during hip revision. Nine patients (29%) were revised to the tripolar construct after failure of a constrained liner. Twenty patients (65%) had at least one episode of instability before the most recent revision. At a mean follow-up of 38 months, modified Postel scores improved from a mean of 5.28 to 9.64 (P < .01). Radiographic follow-up revealed no evidence of component loosening/migration, osteolysis, or polyethylene wear. Two patients (7%) required further revision surgery for recurrent instability. A tripolar construct was effective in eliminating or preventing instability in 93% of the complex cases treated. These early results support the use of a tripolar construct in treating recurrent instability or instability encountered at the time of revision hip arthroplasty.

Statistical Requirements For Pass-Fail Testing Of Contraband Detection Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gilliam, David M.

2011-06-01

Contraband detection systems for homeland security applications are typically tested for probability of detection (PD) and probability of false alarm (PFA) using pass-fail testing protocols. Test protocols usually require specified values for PD and PFA to be demonstrated at a specified level of statistical confidence CL. Based on a recent more theoretical treatment of this subject [1], this summary reviews the definition of CL and provides formulas and spreadsheet functions for constructing tables of general test requirements and for determining the minimum number of tests required. The formulas and tables in this article may be generally applied to many othermore » applications of pass-fail testing, in addition to testing of contraband detection systems.« less

Emergency Response Capability Baseline Needs Assessment Compliance Assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sharry, John A.

2013-09-16

This document is the second of a two-part analysis of Emergency Response Capabilities of Lawrence Livermore National Laboratory. The first part, 2013 Baseline Needs Assessment Requirements Document established the minimum performance criteria necessary to meet mandatory requirements. This second part analyses the performance of Lawrence Livermore Laboratory Emergency Management Department to the contents of the Requirements Document. The document was prepared based on an extensive review of information contained in the 2009 BNA, the 2012 BNA document, a review of Emergency Planning Hazards Assessments, a review of building construction, occupancy, fire protection features, dispatch records, LLNL alarm system records, firemore » department training records, and fire department policies and procedures.« less

Deployable bamboo structure project: A building life-cycle report

NASA Astrophysics Data System (ADS)

Firdaus, Adrian; Prastyatama, Budianastas; Sagara, Altho; Wirabuana, Revian N.

2017-11-01

Bamboo is considered as a sustainable material in the world of construction, and it is vastly available in Indonesia. The general utilization of the material is increasingly frequent, however, its usage as a deployable structure-a recently-developed use of bamboo, is still untapped. This paper presents a report on a deployable bamboo structure project, covering the entire building life-cycle phase. The cycle encompasses the designing; fabrication; transportation; construction; operation and maintenance; as well as a plan for future re-use. The building is made of a configuration of the structural module, each being a folding set of bars which could be reduced in size to fit into vehicles for easy transportation. Each structural module was made of Gigantochloa apus bamboo. The fabrication, transportation, and construction phase require by a minimum of three workers. The fabrication and construction phase require three hours and fifteen minutes respectively. The building is utilized as cafeteria stands, the operation and maintenance phase started since early March 2017. The maintenance plan is scheduled on a monthly basis, focusing on the inspection of the locking mechanism element and the entire structural integrity. The building is designed to allow disassembly process so that it is reusable in the future.

Axisymmetric inlet minimum weight design method

NASA Technical Reports Server (NTRS)

Nadell, Shari-Beth

1995-01-01

An analytical method for determining the minimum weight design of an axisymmetric supersonic inlet has been developed. The goal of this method development project was to improve the ability to predict the weight of high-speed inlets in conceptual and preliminary design. The initial model was developed using information that was available from inlet conceptual design tools (e.g., the inlet internal and external geometries and pressure distributions). Stiffened shell construction was assumed. Mass properties were computed by analyzing a parametric cubic curve representation of the inlet geometry. Design loads and stresses were developed at analysis stations along the length of the inlet. The equivalent minimum structural thicknesses for both shell and frame structures required to support the maximum loads produced by various load conditions were then determined. Preliminary results indicated that inlet hammershock pressures produced the critical design load condition for a significant portion of the inlet. By improving the accuracy of inlet weight predictions, the method will improve the fidelity of propulsion and vehicle design studies and increase the accuracy of weight versus cost studies.

[Assessment on the ecological suitability in Zhuhai City, Guangdong, China, based on minimum cumulative resistance model].

PubMed

Li, Jian-fei; Li, Lin; Guo, Luo; Du, Shi-hong

2016-01-01

Urban landscape has the characteristics of spatial heterogeneity. Because the expansion process of urban constructive or ecological land has different resistance values, the land unit stimulates and promotes the expansion of ecological land with different intensity. To compare the effect of promoting and hindering functions in the same land unit, we firstly compared the minimum cumulative resistance value of promoting and hindering functions, and then looked for the balance of two landscape processes under the same standard. According to the ecology principle of minimum limit factor, taking the minimum cumulative resistance analysis method under two expansion processes as the evaluation method of urban land ecological suitability, this research took Zhuhai City as the study area to estimate urban ecological suitability by relative evaluation method with remote sensing image, field survey, and statistics data. With the support of ArcGIS, five types of indicators on landscape types, ecological value, soil erosion sensitivity, sensitivity of geological disasters, and ecological function were selected as input parameters in the minimum cumulative resistance model to compute urban ecological suitability. The results showed that the ecological suitability of the whole Zhuhai City was divided into five levels: constructive expansion prohibited zone (10.1%), constructive expansion restricted zone (32.9%), key construction zone (36.3%), priority development zone (2.3%), and basic cropland (18.4%). Ecological suitability of the central area of Zhuhai City was divided into four levels: constructive expansion prohibited zone (11.6%), constructive expansion restricted zone (25.6%), key construction zone (52.4%), priority development zone (10.4%). Finally, we put forward the sustainable development framework of Zhuhai City according to the research conclusion. On one hand, the government should strictly control the development of the urban center area. On the other hand, the secondary urban center area such as Junchang and Doumen need improve the public infrastructure to relieve the imbalance between eastern and western development in Zhuhai City.

43 CFR 5451.1 - Minimum performance bond requirements; types.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Minimum performance bond requirements... § 5451.1 Minimum performance bond requirements; types. (a) A minimum performance bond of not less than 20... minimum bond as provided in § 5451.2 of this title. A minimum performance bond of not less than $500 will...

Employment Effects of Minimum and Subminimum Wages. Recent Evidence.

ERIC Educational Resources Information Center

Neumark, David

Using a specially constructed panel data set on state minimum wage laws and labor market conditions, Neumark and Wascher (1992) presented evidence that countered the claim that minimum wages could be raised with no cost to employment. They concluded that estimates indicating that minimum wages reduced employment on the order of 1-2 percent for a…

The constructal law of design and evolution in nature

PubMed Central

Bejan, Adrian; Lorente, Sylvie

2010-01-01

Constructal theory is the view that (i) the generation of images of design (pattern, rhythm) in nature is a phenomenon of physics and (ii) this phenomenon is covered by a principle (the constructal law): ‘for a finite-size flow system to persist in time (to live) it must evolve such that it provides greater and greater access to the currents that flow through it’. This law is about the necessity of design to occur, and about the time direction of the phenomenon: the tape of the design evolution ‘movie’ runs such that existing configurations are replaced by globally easier flowing configurations. The constructal law has two useful sides: the prediction of natural phenomena and the strategic engineering of novel architectures, based on the constructal law, i.e. not by mimicking nature. We show that the emergence of scaling laws in inanimate (geophysical) flow systems is the same phenomenon as the emergence of allometric laws in animate (biological) flow systems. Examples are lung design, animal locomotion, vegetation, river basins, turbulent flow structure, self-lubrication and natural multi-scale porous media. This article outlines the place of the constructal law as a self-standing law in physics, which covers all the ad hoc (and contradictory) statements of optimality such as minimum entropy generation, maximum entropy generation, minimum flow resistance, maximum flow resistance, minimum time, minimum weight, uniform maximum stresses and characteristic organ sizes. Nature is configured to flow and move as a conglomerate of ‘engine and brake’ designs. PMID:20368252

The constructal law of design and evolution in nature.

PubMed

Bejan, Adrian; Lorente, Sylvie

2010-05-12

Constructal theory is the view that (i) the generation of images of design (pattern, rhythm) in nature is a phenomenon of physics and (ii) this phenomenon is covered by a principle (the constructal law): 'for a finite-size flow system to persist in time (to live) it must evolve such that it provides greater and greater access to the currents that flow through it'. This law is about the necessity of design to occur, and about the time direction of the phenomenon: the tape of the design evolution 'movie' runs such that existing configurations are replaced by globally easier flowing configurations. The constructal law has two useful sides: the prediction of natural phenomena and the strategic engineering of novel architectures, based on the constructal law, i.e. not by mimicking nature. We show that the emergence of scaling laws in inanimate (geophysical) flow systems is the same phenomenon as the emergence of allometric laws in animate (biological) flow systems. Examples are lung design, animal locomotion, vegetation, river basins, turbulent flow structure, self-lubrication and natural multi-scale porous media. This article outlines the place of the constructal law as a self-standing law in physics, which covers all the ad hoc (and contradictory) statements of optimality such as minimum entropy generation, maximum entropy generation, minimum flow resistance, maximum flow resistance, minimum time, minimum weight, uniform maximum stresses and characteristic organ sizes. Nature is configured to flow and move as a conglomerate of 'engine and brake' designs.

Application of modern control theory to the design of optimum aircraft controllers

NASA Technical Reports Server (NTRS)

Power, L. J.

1973-01-01

The synthesis procedure presented is based on the solution of the output regulator problem of linear optimal control theory for time-invariant systems. By this technique, solution of the matrix Riccati equation leads to a constant linear feedback control law for an output regulator which will maintain a plant in a particular equilibrium condition in the presence of impulse disturbances. Two simple algorithms are presented that can be used in an automatic synthesis procedure for the design of maneuverable output regulators requiring only selected state variables for feedback. The first algorithm is for the construction of optimal feedforward control laws that can be superimposed upon a Kalman output regulator and that will drive the output of a plant to a desired constant value on command. The second algorithm is for the construction of optimal Luenberger observers that can be used to obtain feedback control laws for the output regulator requiring measurement of only part of the state vector. This algorithm constructs observers which have minimum response time under the constraint that the magnitude of the gains in the observer filter be less than some arbitrary limit.

12 CFR 3.10 - Minimum capital requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 1 2014-01-01 2014-01-01 false Minimum capital requirements. 3.10 Section 3.10 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY CAPITAL ADEQUACY STANDARDS Capital Ratio Requirements and Buffers § 3.10 Minimum capital requirements. (a) Minimum capital...

Cost of and soil loss on "minimum-standard" forest truck roads constructed in the central Appalachians

Treesearch

J. N. Kochenderfer; G. W. Wendel; H. Clay Smith

1984-01-01

A "minimum-standard" forest truck road that provides efficient and environmentally acceptable access for several forest activities is described. Cost data are presented for eight of these roads constructed in the central Appalachians. The average cost per mile excluding gravel was $8,119. The range was $5,048 to $14,424. Soil loss was measured from several...

Magnetic Coupling in the Disks around Young Gas Giant Planets

NASA Astrophysics Data System (ADS)

Turner, N. J.; Lee, Man Hoi; Sano, T.

2014-03-01

We examine the conditions under which the disks of gas and dust orbiting young gas giant planets are sufficiently conducting to experience turbulence driven by the magneto-rotational instability. By modeling the ionization and conductivity in the disk around proto-Jupiter, we find that turbulence is possible if the X-rays emitted near the Sun reach the planet's vicinity and either (1) the gas surface densities are in the range of the minimum-mass models constructed by augmenting Jupiter's satellites to solar composition, while dust is depleted from the disk atmosphere, or (2) the surface densities are much less, and in the range of gas-starved models fed with material from the solar nebula, but not so low that ambipolar diffusion decouples the neutral gas from the plasma. The results lend support to both minimum-mass and gas-starved models of the protojovian disk. (1) The dusty minimum-mass models have internal conductivities low enough to prevent angular momentum transfer by magnetic forces, as required for the material to remain in place while the satellites form. (2) The gas-starved models have magnetically active surface layers and a decoupled interior "dead zone." Similar active layers in the solar nebula yield accretion stresses in the range assumed in constructing the circumjovian gas-starved models. Our results also point to aspects of both classes of models that can be further developed. Non-turbulent minimum-mass models will lose dust from their atmospheres by settling, enabling gas to accrete through a thin surface layer. For the gas-starved models it is crucial to learn whether enough stellar X-ray and ultraviolet photons reach the circumjovian disk. Additionally, the stress-to-pressure ratio ought to increase with distance from the planet, likely leading to episodic accretion outbursts.

Demonstration and Validation of a Regenerated Cellulose Dialysis Membrane Diffusion Sampler for Monitoring Ground-Water Quality and Remediation Progress at DoD Site: Perchlorate and Ordnance Compounds

DTIC Science & Technology

2011-10-01

Regulatory Council LDPE low-density polyethylene MDL minimum detection limit NAVFAC ESC Naval Facilities Engineering Command Engineering Service...membrane sampler design consists of a tubular-shaped bag made of flexible low-density polyethylene ( LDPE ) (Vroblesky, 2001a, 2001b). The LDPE tube is...requirements, and can be constructed from small-diameter LDPE tubing that fits into small- 4 diameter wells. These polyethylene diffusion bag

Analysis of Voltammetric Half-Wave Potentials in Low Ionic Strength Solutions and Voltammetric Measurement of Ion Impurity Concentrations

DTIC Science & Technology

1990-11-17

voltammetric response. As will be developed in this paper , the ability to observe sigmoidally shaped voltammograms requires a minimum number of solution ions...polished with I 4im diamond paste (Buehler). Similar results ,vere obtained using both methods of electrode construction. Precise values of the electrode...impurities in the bulk of the solution that can serve as an electrolyte, Cimp * We will assume for simplicity that all ionic i f11urities are 1: 1

Modeling ecological minimum requirements for distribution of greater sage-grouse leks: implications for population connectivity across their western range, U.S.A.

PubMed

Knick, Steven T; Hanser, Steven E; Preston, Kristine L

2013-06-01

Greater sage-grouse Centrocercus urophasianus (Bonaparte) currently occupy approximately half of their historical distribution across western North America. Sage-grouse are a candidate for endangered species listing due to habitat and population fragmentation coupled with inadequate regulation to control development in critical areas. Conservation planning would benefit from accurate maps delineating required habitats and movement corridors. However, developing a species distribution model that incorporates the diversity of habitats used by sage-grouse across their widespread distribution has statistical and logistical challenges. We first identified the ecological minimums limiting sage-grouse, mapped similarity to the multivariate set of minimums, and delineated connectivity across a 920,000 km(2) region. We partitioned a Mahalanobis D (2) model of habitat use into k separate additive components each representing independent combinations of species-habitat relationships to identify the ecological minimums required by sage-grouse. We constructed the model from abiotic, land cover, and anthropogenic variables measured at leks (breeding) and surrounding areas within 5 km. We evaluated model partitions using a random subset of leks and historic locations and selected D (2) (k = 10) for mapping a habitat similarity index (HSI). Finally, we delineated connectivity by converting the mapped HSI to a resistance surface. Sage-grouse required sagebrush-dominated landscapes containing minimal levels of human land use. Sage-grouse used relatively arid regions characterized by shallow slopes, even terrain, and low amounts of forest, grassland, and agriculture in the surrounding landscape. Most populations were interconnected although several outlying populations were isolated because of distance or lack of habitat corridors for exchange. Land management agencies currently are revising land-use plans and designating critical habitat to conserve sage-grouse and avoid endangered species listing. Our results identifying attributes important for delineating habitats or modeling connectivity will facilitate conservation and management of landscapes important for supporting current and future sage-grouse populations.

Modeling ecological minimum requirements for distribution of greater sage-grouse leks: implications for population connectivity across their western range, U.S.A.

USGS Publications Warehouse

Knick, Steven T.; Hanser, Steven E.; Preston, Kristine L.

2013-01-01

Greater sage-grouse Centrocercus urophasianus (Bonaparte) currently occupy approximately half of their historical distribution across western North America. Sage-grouse are a candidate for endangered species listing due to habitat and population fragmentation coupled with inadequate regulation to control development in critical areas. Conservation planning would benefit from accurate maps delineating required habitats and movement corridors. However, developing a species distribution model that incorporates the diversity of habitats used by sage-grouse across their widespread distribution has statistical and logistical challenges. We first identified the ecological minimums limiting sage-grouse, mapped similarity to the multivariate set of minimums, and delineated connectivity across a 920,000 km2 region. We partitioned a Mahalanobis D2 model of habitat use into k separate additive components each representing independent combinations of species–habitat relationships to identify the ecological minimums required by sage-grouse. We constructed the model from abiotic, land cover, and anthropogenic variables measured at leks (breeding) and surrounding areas within 5 km. We evaluated model partitions using a random subset of leks and historic locations and selected D2 (k = 10) for mapping a habitat similarity index (HSI). Finally, we delineated connectivity by converting the mapped HSI to a resistance surface. Sage-grouse required sagebrush-dominated landscapes containing minimal levels of human land use. Sage-grouse used relatively arid regions characterized by shallow slopes, even terrain, and low amounts of forest, grassland, and agriculture in the surrounding landscape. Most populations were interconnected although several outlying populations were isolated because of distance or lack of habitat corridors for exchange. Land management agencies currently are revising land-use plans and designating critical habitat to conserve sage-grouse and avoid endangered species listing. Our results identifying attributes important for delineating habitats or modeling connectivity will facilitate conservation and management of landscapes important for supporting current and future sage-grouse populations.

49 CFR Table 1 of Subpart B to... - Minimum Coefficient of Retroreflection (RA) (in Candela/Lux/Meter2) Requirement for...

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Minimum Coefficient of Retroreflection (RA) (in Candela/Lux/Meter2) Requirement for Retroreflective Sheeting (Minimum Photometric Performance Requirements... Retroreflection (RA) (in Candela/Lux/Meter2) Requirement for Retroreflective Sheeting (Minimum Photometric...

24 CFR 200.925a - Multifamily and care-type minimum property standards.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Standards § 200.925a Multifamily and care-type minimum property standards. (a) Construction standards. Multifamily or care-type properties shall comply with the minimum property standards contained in the handbook.... If the developer or other interested party so chooses, then the multifamily or care-type property...

24 CFR 200.925a - Multifamily and care-type minimum property standards.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Standards § 200.925a Multifamily and care-type minimum property standards. (a) Construction standards. Multifamily or care-type properties shall comply with the minimum property standards contained in the handbook.... If the developer or other interested party so chooses, then the multifamily or care-type property...

24 CFR 200.925a - Multifamily and care-type minimum property standards.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Standards § 200.925a Multifamily and care-type minimum property standards. (a) Construction standards. Multifamily or care-type properties shall comply with the minimum property standards contained in the handbook.... If the developer or other interested party so chooses, then the multifamily or care-type property...

24 CFR 200.925a - Multifamily and care-type minimum property standards.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Standards § 200.925a Multifamily and care-type minimum property standards. (a) Construction standards. Multifamily or care-type properties shall comply with the minimum property standards contained in the handbook.... If the developer or other interested party so chooses, then the multifamily or care-type property...

Practical biosafety in the tuberculosis laboratory: containment at the source is what truly counts.

PubMed

van Soolingen, D; Wisselink, H J; Lumb, R; Anthony, R; van der Zanden, A; Gilpin, C

2014-08-01

In industrialised countries, sufficient resources for establishing and maintaining fully equipped biosafety level 3 (BSL-3) laboratories according to international standards are generally available. BSL-3 laboratories are designed to provide several layers of containment to protect the laboratory worker as well as the outside environment and community from risk of exposure in case of local contamination. However, such facilities are scarce in high-burden settings, primarily due to the high financial burden and complexity of the initial construction and/or regular maintenance. Measures to prevent unintended exposure to Mycobacterium tuberculosis during laboratory manipulation of specimens and cultures is the first, and by far the most important, aspect of containment. This paper focuses on the need for risk containment at source. Assuming that in many settings the establishment of BSL-3 laboratories with all the required features is not achievable, this paper also discusses the minimum requirements necessary to mitigate risks associated with particular laboratory procedures. The term 'TB containment laboratory' is used throughout this paper to describe the minimum requirements for a laboratory suitable for high-risk procedures. The TB containment laboratory has many, but not all, of the features of a BSL-3 laboratory.

29 CFR 783.26 - The section 6(b)(2) minimum wage requirement.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false The section 6(b)(2) minimum wage requirement. 783.26... The section 6(b)(2) minimum wage requirement. Section 6(b), with paragraph (2) thereof, requires the... prescribed by” paragraph (1) of the subsection is the minimum wage rate applicable according to the schedule...

Nuclear thermionic converter. [tungsten-thorium oxide rods

NASA Technical Reports Server (NTRS)

Phillips, W. M.; Mondt, J. F. (Inventor)

1977-01-01

Efficient nuclear reactor thermionic converter units are described which can be constructed at low cost and assembled in a reactor which requires a minimum of fuel. Each converter unit utilizes an emitter rod with a fluted exterior, several fuel passages located in the bulges that are formed in the rod between the flutes, and a collector receiving passage formed through the center of the rod. An array of rods is closely packed in an interfitting arrangement, with the bulges of the rods received in the recesses formed between the bulges of other rods, thereby closely packing the nuclear fuel. The rods are constructed of a mixture of tungsten and thorium oxide to provide high power output, high efficiency, high strength, and good machinability.

Forensic psychiatric expert witnessing within the criminal justice system in Germany.

PubMed

Konrad, Norbert; Völlm, Birgit

2014-01-01

In recent years, the number of occupied beds in German forensic-psychiatric hospitals has continued to rise. Diversion refers to the removal of offenders from the criminal justice system at any stage of the procedure and court proceedings. There are no specific diversion programs in Germany but diversion does in fact happen via legal regulations that are based on the construct of legal responsibility. The assessments of responsibility as well as risk are the core tasks of forensic-psychiatric expert witnessing in Germany. Recommendations of an interdisciplinary working group serve as a guide to operationalize this forensic-psychiatric task. These recommendations list formal minimum requirements for expert reports on the question of criminal responsibility and risk assessment as well as minimum standards regarding content and in writing the report. Copyright © 2013 Elsevier Ltd. All rights reserved.

76 FR 50164 - Protocol Gas Verification Program and Minimum Competency Requirements for Air Emission Testing...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-12

...-AQ06 Protocol Gas Verification Program and Minimum Competency Requirements for Air Emission Testing... correct certain portions of the Protocol Gas Verification Program and Minimum Competency Requirements for... final rule that amends the Agency's Protocol Gas Verification Program (PGVP) and the minimum competency...

Construction of Protograph LDPC Codes with Linear Minimum Distance

NASA Technical Reports Server (NTRS)

Divsalar, Dariush; Dolinar, Sam; Jones, Christopher

2006-01-01

A construction method for protograph-based LDPC codes that simultaneously achieve low iterative decoding threshold and linear minimum distance is proposed. We start with a high-rate protograph LDPC code with variable node degrees of at least 3. Lower rate codes are obtained by splitting check nodes and connecting them by degree-2 nodes. This guarantees the linear minimum distance property for the lower-rate codes. Excluding checks connected to degree-1 nodes, we show that the number of degree-2 nodes should be at most one less than the number of checks for the protograph LDPC code to have linear minimum distance. Iterative decoding thresholds are obtained by using the reciprocal channel approximation. Thresholds are lowered by using either precoding or at least one very high-degree node in the base protograph. A family of high- to low-rate codes with minimum distance linearly increasing in block size and with capacity-approaching performance thresholds is presented. FPGA simulation results for a few example codes show that the proposed codes perform as predicted.

Optimal wavelength-space crossbar switches for supercomputer optical interconnects.

PubMed

Roudas, Ioannis; Hemenway, B Roe; Grzybowski, Richard R; Karinou, Fotini

2012-08-27

We propose a most economical design of the Optical Shared MemOry Supercomputer Interconnect System (OSMOSIS) all-optical, wavelength-space crossbar switch fabric. It is shown, by analysis and simulation, that the total number of on-off gates required for the proposed N × N switch fabric can scale asymptotically as N ln N if the number of input/output ports N can be factored into a product of small primes. This is of the same order of magnitude as Shannon's lower bound for switch complexity, according to which the minimum number of two-state switches required for the construction of a N × N permutation switch is log2 (N!).

Assessment of the living and workplace health and safety conditions of site-resident construction workers in Tehran, Iran.

PubMed

Mohseni, Peyman Hossein; Farshad, Ali Asghar; Mirkazemi, Roksana; Orak, Rouhangiz Jamshidi

2015-01-01

The purpose of this study was to assess living and workplace safety conditions of construction workers in Tehran, Iran. This cross-sectional study was conducted among 410 construction sites in a municipal area of Tehran whose municipal building permits were issued in 2011. Data on ventilation, workplace safety and hygiene were collected by direct observation and interviews with site foremen. Noise levels were estimated from 10 sound-level-meter stations in the municipality area. Lack of ventilation in the workers' rooms was abundant. Bathrooms were unhygienic and minimum requirements such as lighting and ventilation did not exist in 80% of the cases. In nearly 50% of large construction sites, sewage and garbage disposal were inappropriate. Elevator safety was poor at all sites and no measures for fall prevention were present in over 88% of active construction sites. This study showed that the mean 24-h equivalent continuous sound level Leq was over 70 dB in 80% of the sites during weekdays. The results of this study revealed poor health and safety living and working conditions of construction workers in Tehran.

Multi-disciplinary optimization of aeroservoelastic systems

NASA Technical Reports Server (NTRS)

Karpel, Mordechay

1990-01-01

Efficient analytical and computational tools for simultaneous optimal design of the structural and control components of aeroservoelastic systems are presented. The optimization objective is to achieve aircraft performance requirements and sufficient flutter and control stability margins with a minimal weight penalty and without violating the design constraints. Analytical sensitivity derivatives facilitate an efficient optimization process which allows a relatively large number of design variables. Standard finite element and unsteady aerodynamic routines are used to construct a modal data base. Minimum State aerodynamic approximations and dynamic residualization methods are used to construct a high accuracy, low order aeroservoelastic model. Sensitivity derivatives of flutter dynamic pressure, control stability margins and control effectiveness with respect to structural and control design variables are presented. The performance requirements are utilized by equality constraints which affect the sensitivity derivatives. A gradient-based optimization algorithm is used to minimize an overall cost function. A realistic numerical example of a composite wing with four controls is used to demonstrate the modeling technique, the optimization process, and their accuracy and efficiency.

Multidisciplinary optimization of aeroservoelastic systems using reduced-size models

NASA Technical Reports Server (NTRS)

Karpel, Mordechay

1992-01-01

Efficient analytical and computational tools for simultaneous optimal design of the structural and control components of aeroservoelastic systems are presented. The optimization objective is to achieve aircraft performance requirements and sufficient flutter and control stability margins with a minimal weight penalty and without violating the design constraints. Analytical sensitivity derivatives facilitate an efficient optimization process which allows a relatively large number of design variables. Standard finite element and unsteady aerodynamic routines are used to construct a modal data base. Minimum State aerodynamic approximations and dynamic residualization methods are used to construct a high accuracy, low order aeroservoelastic model. Sensitivity derivatives of flutter dynamic pressure, control stability margins and control effectiveness with respect to structural and control design variables are presented. The performance requirements are utilized by equality constraints which affect the sensitivity derivatives. A gradient-based optimization algorithm is used to minimize an overall cost function. A realistic numerical example of a composite wing with four controls is used to demonstrate the modeling technique, the optimization process, and their accuracy and efficiency.

Ka-band Ga-As FET noise receiver/device development

NASA Technical Reports Server (NTRS)

Schellenberg, J. M.; Feng, M.; Hackett, L. H.; Watkins, E. T.; Yamasaki, H.

1982-01-01

The development of technology for a 30 GHz low noise receiver utilizing GaAs FET devices exclusively is discussed. This program required single and dual-gate FET devices, low noise FET amplifiers, dual-gate FET mixers, and FET oscillators operating at Ka-band frequencies. A 0.25 micrometer gate FET device, developed with a minimum noise figure of 3.3 dB at 29 GHz and an associated gain of 7.4 dB, was used to fabricate a 3-stage amplifier with a minimum noise figure and associated gain of 4.4 dB and 17 dB, respectively. The 1-dB gain bandwidth of this amplifier extended from below 26.5 GHz to 30.5 GHz. A dual-gate mixer with a 2 dB conversion loss and a minimum noise figure of 10 dB at 29 GHz as well as a dielectric resonator stabilized FET oscillator at 25 GHz for the receiver L0. From these components, a hybrid microwave integrated circuit receiver was constructed which demonstrates a minimum single-side band noise figure of 4.6 dB at 29 GHz with a conversion gain of 17 dB. The output power at the 1-dB gain compression point was -5 dBm.

Optimization of self-study room open problem based on green and low-carbon campus construction

NASA Astrophysics Data System (ADS)

Liu, Baoyou

2017-04-01

The optimization of self-study room open arrangement problem in colleges and universities is conducive to accelerate the fine management of the campus and promote green and low-carbon campus construction. Firstly, combined with the actual survey data, the self-study area and living area were divided into different blocks, and the electricity consumption in each self-study room and distance between different living and studying areas were normalized. Secondly, the minimum of total satisfaction index and the minimum of the total electricity consumption were selected as the optimization targets respectively. The mathematical models of linear programming were established and resolved by LINGO software. The results showed that the minimum of total satisfaction index was 4055.533 and the total minimum electricity consumption was 137216 W. Finally, some advice had been put forward on how to realize the high efficient administration of the study room.

Protograph based LDPC codes with minimum distance linearly growing with block size

NASA Technical Reports Server (NTRS)

Divsalar, Dariush; Jones, Christopher; Dolinar, Sam; Thorpe, Jeremy

2005-01-01

We propose several LDPC code constructions that simultaneously achieve good threshold and error floor performance. Minimum distance is shown to grow linearly with block size (similar to regular codes of variable degree at least 3) by considering ensemble average weight enumerators. Our constructions are based on projected graph, or protograph, structures that support high-speed decoder implementations. As with irregular ensembles, our constructions are sensitive to the proportion of degree-2 variable nodes. A code with too few such nodes tends to have an iterative decoding threshold that is far from the capacity threshold. A code with too many such nodes tends to not exhibit a minimum distance that grows linearly in block length. In this paper we also show that precoding can be used to lower the threshold of regular LDPC codes. The decoding thresholds of the proposed codes, which have linearly increasing minimum distance in block size, outperform that of regular LDPC codes. Furthermore, a family of low to high rate codes, with thresholds that adhere closely to their respective channel capacity thresholds, is presented. Simulation results for a few example codes show that the proposed codes have low error floors as well as good threshold SNFt performance.

12 CFR 932.8 - Minimum liquidity requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 7 2011-01-01 2011-01-01 false Minimum liquidity requirements. 932.8 Section 932.8 Banks and Banking FEDERAL HOUSING FINANCE BOARD FEDERAL HOME LOAN BANK RISK MANAGEMENT AND CAPITAL STANDARDS FEDERAL HOME LOAN BANK CAPITAL REQUIREMENTS § 932.8 Minimum liquidity requirements. In...

7 CFR 932.150 - Modified minimum quality requirements for canned green ripe olives.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 8 2010-01-01 2010-01-01 false Modified minimum quality requirements for canned green... (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts... requirements for canned green ripe olives. The minimum quality requirements prescribed in § 932.52 (a)(1) of...

7 CFR 932.150 - Modified minimum quality requirements for canned green ripe olives.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 8 2011-01-01 2011-01-01 false Modified minimum quality requirements for canned green... (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts... requirements for canned green ripe olives. The minimum quality requirements prescribed in § 932.52 (a)(1) of...

12 CFR 932.8 - Minimum liquidity requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Minimum liquidity requirements. 932.8 Section 932.8 Banks and Banking FEDERAL HOUSING FINANCE BOARD FEDERAL HOME LOAN BANK RISK MANAGEMENT AND CAPITAL STANDARDS FEDERAL HOME LOAN BANK CAPITAL REQUIREMENTS § 932.8 Minimum liquidity requirements. In...

An Earth longwave radiation climate model

NASA Technical Reports Server (NTRS)

Yang, S. K.

1984-01-01

An Earth outgoing longwave radiation (OLWR) climate model was constructed for radiation budget study. Required information is provided by on empirical 100mb water vapor mixing ratio equation of the mixing ratio interpolation scheme. Cloud top temperature is adjusted so that the calculation would agree with NOAA scanning radiometer measurements. Both clear sky and cloudy sky cases are calculated and discussed for global average, zonal average and world-wide distributed cases. The results agree well with the satellite observations. The clear sky case shows that the OLWR field is highly modulated by water vapor, especially in the tropics. The strongest longitudinal variation occurs in the tropics. This variation can be mostly explained by the strong water vapor gradient. Although in the zonal average case the tropics have a minimum in OLWR, the minimum is essentially contributed by a few very low flux regions, such as the Amazon, Indonesian and the Congo.

A hierarchical approach for the design improvements of an Organocat biorefinery.

PubMed

Abdelaziz, Omar Y; Gadalla, Mamdouh A; El-Halwagi, Mahmoud M; Ashour, Fatma H

2015-04-01

Lignocellulosic biomass has emerged as a potentially attractive renewable energy source. Processing technologies of such biomass, particularly its primary separation, still lack economic justification due to intense energy requirements. Establishing an economically viable and energy efficient biorefinery scheme is a significant challenge. In this work, a systematic approach is proposed for improving basic/existing biorefinery designs. This approach is based on enhancing the efficiency of mass and energy utilization through the use of a hierarchical design approach that involves mass and energy integration. The proposed procedure is applied to a novel biorefinery called Organocat to minimize its energy and mass consumption and total annualized cost. An improved heat exchanger network with minimum energy consumption of 4.5 MJ/kgdry biomass is designed. An optimal recycle network with zero fresh water usage and minimum waste discharge is also constructed, making the process more competitive and economically attractive. Copyright © 2015 Elsevier Ltd. All rights reserved.

47 CFR 22.951 - Minimum coverage requirement.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 2 2010-10-01 2010-10-01 false Minimum coverage requirement. 22.951 Section 22.951 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES PUBLIC MOBILE SERVICES Cellular Radiotelephone Service § 22.951 Minimum coverage requirement. Applications for...

Detecting Hardware-assisted Hypervisor Rootkits within Nested Virtualized Environments

DTIC Science & Technology

2012-06-14

least the minimum required for the guest OS and click “Next”. For 64-bit Windows 7 the minimum required is 2048 MB (Figure 66). Figure 66. Memory...prompted for Memory, allocate at least the minimum required for the guest OS, for 64-bit Windows 7 the minimum required is 2048 MB (Figure 79...130 21. Within the virtual disk creation wizard, select VDI for the file type (Figure 81). Figure 81. Select File Type 22. Select Dynamically

Short version of the Depression Anxiety Stress Scale-21: is it valid for Brazilian adolescents?

PubMed Central

da Silva, Hítalo Andrade; dos Passos, Muana Hiandra Pereira; de Oliveira, Valéria Mayaly Alves; Palmeira, Aline Cabral; Pitangui, Ana Carolina Rodarti; de Araújo, Rodrigo Cappato

2016-01-01

ABSTRACT Objective To evaluate the interday reproducibility, agreement and validity of the construct of short version of the Depression Anxiety Stress Scale-21 applied to adolescents. Methods The sample consisted of adolescents of both sexes, aged between 10 and 19 years, who were recruited from schools and sports centers. The validity of the construct was performed by exploratory factor analysis, and reliability was calculated for each construct using the intraclass correlation coefficient, standard error of measurement and the minimum detectable change. Results The factor analysis combining the items corresponding to anxiety and stress in a single factor, and depression in a second factor, showed a better match of all 21 items, with higher factor loadings in their respective constructs. The reproducibility values for depression were intraclass correlation coefficient with 0.86, standard error of measurement with 0.80, and minimum detectable change with 2.22; and, for anxiety/stress: intraclass correlation coefficient with 0.82, standard error of measurement with 1.80, and minimum detectable change with 4.99. Conclusion The short version of the Depression Anxiety Stress Scale-21 showed excellent values of reliability, and strong internal consistency. The two-factor model with condensation of the constructs anxiety and stress in a single factor was the most acceptable for the adolescent population. PMID:28076595

Constructing Phylogenies.

ERIC Educational Resources Information Center

Bilardello, Nicholas; Valdes, Linda

1998-01-01

Introduces a method for constructing phylogenies using molecular traits and elementary graph theory. Discusses analyzing molecular data and using weighted graphs, minimum-weight spanning trees, and rooted cube phylogenies to display the data. (DDR)

Design and fabrication of the NASA HL-20 full scale research model

NASA Technical Reports Server (NTRS)

Driver, K. Dean; Vess, Robert J.

1991-01-01

A full-scale engineering model of the HL-20 Personnel Launch System (PLS) was constructed for systems and human factors evaluation. Construction techniques were developed to enable the vehicle to be constructed with a minimum of time and cost. The design and construction of the vehicle are described.

Minimum Stocking Requirements for Retailers in the Special Supplemental Nutrition Program for Women, Infants, and Children: Disparities Across US States.

PubMed

Pelletier, Jennifer E; Schreiber, Liana R N; Laska, Melissa N

2017-07-01

To examine state variation in minimum stocking requirements for Special Supplemental Nutrition Program for Women, Infants, and Children (WIC)-authorized small food retailers. We obtained minimum stocking requirements for 50 states and the District of Columbia in 2017 from WIC Web pages or e-mail from the state WIC agency. We developed a coding protocol to compare minimum quantities and varieties required for 12 food and beverage categories. We calculated the median, range, and interquartile range for each measure. Nearly all states set minimum varieties and quantities of fruits and vegetables, 100% juice, whole grain-rich foods, breakfast cereal, milk, cheese, eggs, legumes, and peanut butter. Fewer states set requirements for canned fish, yogurt, and tofu. Most measures had a large range in minimum requirements (e.g., $8-$100 of fruits and vegetables, 60-144 oz of breakfast cereal). WIC-participating retailers must adhere to very different minimum stocking requirements across states, which may result in disparities in food and beverage products available to WIC recipients. Public Health Implications. The results provide benchmarks that can inform new local, state, and federal program and policy efforts to increase healthy food availability in retail settings.

29 CFR 520.200 - What is the legal authority for payment of wages lower than the minimum wage required by section...

Code of Federal Regulations, 2010 CFR

2010-07-01

... the minimum wage required by section 6(a) of the Fair Labor Standards Act? 520.200 Section 520.200... lower than the minimum wage required by section 6(a) of the Fair Labor Standards Act? Section 14(a) of..., for the payment of special minimum wage rates to workers employed as messengers, learners (including...

29 CFR 516.11 - Employees exempt from both minimum wage and overtime pay requirements under section 13(a) (2), (3...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Employees exempt from both minimum wage and overtime pay... Exemptions Under the Act; Other Special Requirements § 516.11 Employees exempt from both minimum wage and.... With respect to each and every employee exempt from both the minimum wage and overtime pay requirements...

78 FR 21060 - Appeal Proceedings Before the Commission

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-09

... adoption of alternate standards from those required by the Commission's minimum internal control standards... adoption of alternate standards from those required by the Commission's minimum internal control standards... TGRAs' adoption of alternate standards from those required by the Commission's minimum internal control...

Construction of a standard test assembly for controlled laser studies in tissues: Preliminary study on human bone material

NASA Astrophysics Data System (ADS)

Beer, Franziska; Passow, Harald

2008-02-01

The aim of the study is the construction of a test assembly, which facilitates objective, comparative studies on the cutting performance of lasers in hard tissue. To ensure the applicability of our own construction for the reproducible performance of laser incisions in hard tissue, eleven freshly extracted blocks (2×1.5cm2) of human bone were prepared with a Er,Cr:YSGG laser by using a handheld handpiece, respectively, using the constructed device for a standardized cutting. A total of 44 cuts were executed. The specimen were then histologically evaluated. The standard test assembly met the requirements concerning the provision of objective results. The findings of the histological evaluation prove the reproducibility of the results. The standard test assembly presented in this paper facilitates comparative studies of different laser systems by reducing subjective influence on the preparation to a minimum. The results of this preliminary study show that the precision of the guiding instrument for laser cutting reduces the error of cut width by 50-fold, from 50to1μm.

Tips on preventing or minimizing construction claims.

PubMed

Kasimer, J H

1981-02-01

With proper planning and use of successful techniques of claims avoidance, recognition, and resolution from the initial stages of the project, a hospital can prevent or minimize construction delays and claims and can complete its new construction in a reasonable atmosphere with a minimum of cost.

42 CFR 84.197 - Respirator containers; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Respirator containers; minimum requirements. 84.197... Cartridge Respirators § 84.197 Respirator containers; minimum requirements. Respirators shall be equipped with a substantial, durable container bearing markings which show the applicant's name, the type and...

9 CFR 2.130 - Minimum age requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 9 Animals and Animal Products 1 2012-01-01 2012-01-01 false Minimum age requirements. 2.130... AGRICULTURE ANIMAL WELFARE REGULATIONS Miscellaneous § 2.130 Minimum age requirements. No dog or cat shall be... least eight (8) weeks of age and has been weaned. ...

9 CFR 2.130 - Minimum age requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 9 Animals and Animal Products 1 2014-01-01 2014-01-01 false Minimum age requirements. 2.130... AGRICULTURE ANIMAL WELFARE REGULATIONS Miscellaneous § 2.130 Minimum age requirements. No dog or cat shall be... least eight (8) weeks of age and has been weaned. ...

9 CFR 2.130 - Minimum age requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 9 Animals and Animal Products 1 2013-01-01 2013-01-01 false Minimum age requirements. 2.130... AGRICULTURE ANIMAL WELFARE REGULATIONS Miscellaneous § 2.130 Minimum age requirements. No dog or cat shall be... least eight (8) weeks of age and has been weaned. ...

9 CFR 2.130 - Minimum age requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 1 2011-01-01 2011-01-01 false Minimum age requirements. 2.130... AGRICULTURE ANIMAL WELFARE REGULATIONS Miscellaneous § 2.130 Minimum age requirements. No dog or cat shall be... least eight (8) weeks of age and has been weaned. ...

7 CFR 51.311 - Marking requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... STANDARDS) United States Standards for Grades of Apples Marking Requirements § 51.311 Marking requirements... minimum diameter of apples packed in a closed container shall be indicated on the container. For apple... varieties, the minimum diameter and minimum weight of apples packed in a closed container shall be indicated...

7 CFR 51.311 - Marking requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... STANDARDS) United States Standards for Grades of Apples Marking Requirements § 51.311 Marking requirements... minimum diameter of apples packed in a closed container shall be indicated on the container. For apple... varieties, the minimum diameter and minimum weight of apples packed in a closed container shall be indicated...

7 CFR 51.311 - Marking requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... STANDARDS) United States Standards for Grades of Apples Marking Requirements § 51.311 Marking requirements... minimum diameter of apples packed in a closed container shall be indicated on the container. For apple... varieties, the minimum diameter and minimum weight of apples packed in a closed container shall be indicated...

42 CFR 84.134 - Respirator containers; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Respirator containers; minimum requirements. 84.134... Respirators § 84.134 Respirator containers; minimum requirements. Supplied-air respirators shall be equipped with a substantial, durable container bearing markings which show the applicant's name, the type and...

42 CFR 84.125 - Particulate tests; canisters containing particulate filters; minimum requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... filters; minimum requirements. 84.125 Section 84.125 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF... RESPIRATORY PROTECTIVE DEVICES Gas Masks § 84.125 Particulate tests; canisters containing particulate filters; minimum requirements. Gas mask canisters containing filters for protection against particulates (e.g...

42 CFR 84.125 - Particulate tests; canisters containing particulate filters; minimum requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... filters; minimum requirements. 84.125 Section 84.125 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF... RESPIRATORY PROTECTIVE DEVICES Gas Masks § 84.125 Particulate tests; canisters containing particulate filters; minimum requirements. Gas mask canisters containing filters for protection against particulates (e.g...

42 CFR 84.125 - Particulate tests; canisters containing particulate filters; minimum requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... filters; minimum requirements. 84.125 Section 84.125 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF... RESPIRATORY PROTECTIVE DEVICES Gas Masks § 84.125 Particulate tests; canisters containing particulate filters; minimum requirements. Gas mask canisters containing filters for protection against particulates (e.g...

42 CFR 84.125 - Particulate tests; canisters containing particulate filters; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... filters; minimum requirements. 84.125 Section 84.125 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF... RESPIRATORY PROTECTIVE DEVICES Gas Masks § 84.125 Particulate tests; canisters containing particulate filters; minimum requirements. Gas mask canisters containing filters for protection against particulates (e.g...

42 CFR 84.125 - Particulate tests; canisters containing particulate filters; minimum requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... filters; minimum requirements. 84.125 Section 84.125 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF... RESPIRATORY PROTECTIVE DEVICES Gas Masks § 84.125 Particulate tests; canisters containing particulate filters; minimum requirements. Gas mask canisters containing filters for protection against particulates (e.g...

47 CFR 22.951 - Minimum coverage requirement.

Code of Federal Regulations, 2011 CFR

2011-10-01

... MOBILE SERVICES Cellular Radiotelephone Service § 22.951 Minimum coverage requirement. Applications for authority to operate a new cellular system in an unserved area, other than those filed by the licensee of an... toward the minimum coverage requirement. Applications for authority to operate a new cellular system in...

42 CFR 84.74 - Apparatus containers; minimum requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 1 2011-10-01 2011-10-01 false Apparatus containers; minimum requirements. 84.74...-Contained Breathing Apparatus § 84.74 Apparatus containers; minimum requirements. (a) Apparatus may be...) Containers supplied by the applicant for carrying or storing self-contained breathing apparatus will be...

42 CFR 84.74 - Apparatus containers; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Apparatus containers; minimum requirements. 84.74...-Contained Breathing Apparatus § 84.74 Apparatus containers; minimum requirements. (a) Apparatus may be...) Containers supplied by the applicant for carrying or storing self-contained breathing apparatus will be...

Bulk Superconductors in Mobile Application

NASA Astrophysics Data System (ADS)

Werfel, F. N.; Delor, U. Floegel-; Rothfeld, R.; Riedel, T.; Wippich, D.; Goebel, B.; Schirrmeister, P.

We investigate and review concepts of multi - seeded REBCO bulk superconductors in mobile application. ATZ's compact HTS bulk magnets can trap routinely 1 T@77 K. Except of magnetization, flux creep and hysteresis, industrial - like properties as compactness, power density, and robustness are of major device interest if mobility and light-weight construction is in focus. For mobile application in levitated trains or demonstrator magnets we examine the performance of on-board cryogenics either by LN2 or cryo-cooler application. The mechanical, electric and thermodynamical requirements of compact vacuum cryostats for Maglev train operation were studied systematically. More than 30 units are manufactured and tested. The attractive load to weight ratio is more than 10 and favours group module device constructions up to 5 t load on permanent magnet (PM) track. A transportable and compact YBCO bulk magnet cooled with in-situ 4 Watt Stirling cryo-cooler for 50 - 80 K operation is investigated. Low cooling power and effective HTS cold mass drives the system construction to a minimum - thermal loss and light-weight design.

Basic primitives for molecular diagram sketching

PubMed Central

2010-01-01

A collection of primitive operations for molecular diagram sketching has been developed. These primitives compose a concise set of operations which can be used to construct publication-quality 2 D coordinates for molecular structures using a bare minimum of input bandwidth. The input requirements for each primitive consist of a small number of discrete choices, which means that these primitives can be used to form the basis of a user interface which does not require an accurate pointing device. This is particularly relevant to software designed for contemporary mobile platforms. The reduction of input bandwidth is accomplished by using algorithmic methods for anticipating probable geometries during the sketching process, and by intelligent use of template grafting. The algorithms and their uses are described in detail. PMID:20923555

Solar power satellite life-cycle energy recovery consideration

NASA Astrophysics Data System (ADS)

Weingartner, S.; Blumenberg, J.

The construction, in-orbit installation and maintenance of a solar power satellite (SPS) will demand large amounts of energy. As a minimum requirement for an energy effective power satellite it is asked that this amount of energy be recovered. The energy effectiveness in this sense resulting in a positive net energy balance is a prerequisite for cost-effective power satellite. This paper concentrates on life-cycle energy recovery instead on monetary aspects. The trade-offs between various power generation systems (different types of solar cells, solar dynamic), various construction and installation strategies (using terrestrial or extra-terrestrial resources) and the expected/required lifetime of the SPS are reviewed. The presented work is based on a 2-year study performed at the Technical University of Munich. The study showed that the main energy which is needed to make a solar power satellite a reality is required for the production of the solar power components (up to 65%), especially for the solar cell production. Whereas transport into orbit accounts in the order of 20% and the receiving station on earth (rectenna) requires about 15% of the total energy investment. The energetic amortization time, i.e. the time the SPS has to be operational to give back the amount of energy which was needed for its production installation and operation, is about two years.

30 CFR 77.506-1 - Electric equipment and circuits; overload and short circuit protection; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... short circuit protection; minimum requirements. 77.506-1 Section 77.506-1 Mineral Resources MINE SAFETY...-1 Electric equipment and circuits; overload and short circuit protection; minimum requirements. Devices providing either short circuit protection or protection against overload shall conform to the...

13 CFR 107.210 - Minimum capital requirements for Licensees.

Code of Federal Regulations, 2010 CFR

2010-01-01

... except the minimum capital requirement, as determined solely by SBA; (ii) Has a viable business plan... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Minimum capital requirements for Licensees. 107.210 Section 107.210 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SMALL...

12 CFR 217.10 - Minimum capital requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 2 2014-01-01 2014-01-01 false Minimum capital requirements. 217.10 Section 217.10 Banks and Banking FEDERAL RESERVE SYSTEM BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM CAPITAL ADEQUACY OF BOARD-REGULATED INSTITUTIONS Capital Ratio Requirements and Buffers § 217.10 Minimum...

42 CFR 84.87 - Compressed gas filters; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Compressed gas filters; minimum requirements. 84.87...-Contained Breathing Apparatus § 84.87 Compressed gas filters; minimum requirements. All self-contained breathing apparatus using compressed gas shall have a filter downstream of the gas source to effectively...

42 CFR 84.87 - Compressed gas filters; minimum requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 1 2013-10-01 2013-10-01 false Compressed gas filters; minimum requirements. 84.87...-Contained Breathing Apparatus § 84.87 Compressed gas filters; minimum requirements. All self-contained breathing apparatus using compressed gas shall have a filter downstream of the gas source to effectively...

42 CFR 84.87 - Compressed gas filters; minimum requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 1 2011-10-01 2011-10-01 false Compressed gas filters; minimum requirements. 84.87...-Contained Breathing Apparatus § 84.87 Compressed gas filters; minimum requirements. All self-contained breathing apparatus using compressed gas shall have a filter downstream of the gas source to effectively...

42 CFR 84.87 - Compressed gas filters; minimum requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 1 2012-10-01 2012-10-01 false Compressed gas filters; minimum requirements. 84.87...-Contained Breathing Apparatus § 84.87 Compressed gas filters; minimum requirements. All self-contained breathing apparatus using compressed gas shall have a filter downstream of the gas source to effectively...

42 CFR 84.87 - Compressed gas filters; minimum requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 1 2014-10-01 2014-10-01 false Compressed gas filters; minimum requirements. 84.87...-Contained Breathing Apparatus § 84.87 Compressed gas filters; minimum requirements. All self-contained breathing apparatus using compressed gas shall have a filter downstream of the gas source to effectively...

9 CFR 2.130 - Minimum age requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Minimum age requirements. 2.130 Section 2.130 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL WELFARE REGULATIONS Miscellaneous § 2.130 Minimum age requirements. No dog or cat shall be...

32 CFR 552.73 - Minimum requirements for automobile insurance policies.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 3 2010-07-01 2010-07-01 true Minimum requirements for automobile insurance policies. 552.73 Section 552.73 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY... Military Reservations § 552.73 Minimum requirements for automobile insurance policies. Policies sold on...

32 CFR 552.73 - Minimum requirements for automobile insurance policies.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 3 2014-07-01 2014-07-01 false Minimum requirements for automobile insurance policies. 552.73 Section 552.73 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY... Military Reservations § 552.73 Minimum requirements for automobile insurance policies. Policies sold on...

32 CFR 552.73 - Minimum requirements for automobile insurance policies.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 3 2012-07-01 2009-07-01 true Minimum requirements for automobile insurance policies. 552.73 Section 552.73 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY... Military Reservations § 552.73 Minimum requirements for automobile insurance policies. Policies sold on...

32 CFR 552.73 - Minimum requirements for automobile insurance policies.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 3 2013-07-01 2013-07-01 false Minimum requirements for automobile insurance policies. 552.73 Section 552.73 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY... Military Reservations § 552.73 Minimum requirements for automobile insurance policies. Policies sold on...

32 CFR 552.73 - Minimum requirements for automobile insurance policies.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 3 2011-07-01 2009-07-01 true Minimum requirements for automobile insurance policies. 552.73 Section 552.73 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY... Military Reservations § 552.73 Minimum requirements for automobile insurance policies. Policies sold on...

48 CFR 852.219-9 - VA Small business subcontracting plan minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false VA Small business... Provisions and Clauses 852.219-9 VA Small business subcontracting plan minimum requirements. As prescribed in subpart 819.709, insert the following clause: VA Small Business Subcontracting Plan Minimum Requirements...

77 FR 14321 - Modifications to Minimum Present Value Requirements for Partial Annuity Distribution Options...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-09

... DEPARTMENT OF THE TREASURY Internal Revenue Service 26 CFR Part 1 [REG-110980-10] RIN 1545-BJ55 Modifications to Minimum Present Value Requirements for Partial Annuity Distribution Options Under Defined... FR 5454), providing guidance relating to the minimum present value requirements applicable to certain...

30 CFR 77.1706 - First aid training program; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false First aid training program; minimum... OF UNDERGROUND COAL MINES Miscellaneous § 77.1706 First aid training program; minimum requirements. (a) All first aid training programs required under the provisions of §§ 77.1703 and 77.1704 shall...

48 CFR 852.219-9 - VA Small business subcontracting plan minimum requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false VA Small business... Provisions and Clauses 852.219-9 VA Small business subcontracting plan minimum requirements. As prescribed in subpart 819.709, insert the following clause: VA Small Business Subcontracting Plan Minimum Requirements...

48 CFR 852.219-9 - VA Small business subcontracting plan minimum requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false VA Small business... Provisions and Clauses 852.219-9 VA Small business subcontracting plan minimum requirements. As prescribed in subpart 819.709, insert the following clause: VA Small Business Subcontracting Plan Minimum Requirements...

48 CFR 852.219-9 - VA Small business subcontracting plan minimum requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 5 2012-10-01 2012-10-01 false VA Small business... Provisions and Clauses 852.219-9 VA Small business subcontracting plan minimum requirements. As prescribed in subpart 819.709, insert the following clause: VA Small Business Subcontracting Plan Minimum Requirements...

48 CFR 852.219-9 - VA Small business subcontracting plan minimum requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false VA Small business... Provisions and Clauses 852.219-9 VA Small business subcontracting plan minimum requirements. As prescribed in subpart 819.709, insert the following clause: VA Small Business Subcontracting Plan Minimum Requirements...

26 CFR 1.6664-4 - Reasonable cause and good faith exception to section 6662 penalties.

Code of Federal Regulations, 2011 CFR

2011-04-01

... claimed. Example 3. E, an individual, worked for Company X doing odd jobs and filling in for other... legal justification. (3) Minimum requirements not dispositive. Satisfaction of the minimum requirements... example, depending on the circumstances, satisfaction of the minimum requirements may not be dispositive...

42 CFR 84.83 - Timers; elapsed time indicators; remaining service life indicators; minimum requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 1 2011-10-01 2011-10-01 false Timers; elapsed time indicators; remaining service life indicators; minimum requirements. 84.83 Section 84.83 Public Health PUBLIC HEALTH SERVICE... indicators; remaining service life indicators; minimum requirements. (a) Elapsed time indicators shall be...

42 CFR 84.83 - Timers; elapsed time indicators; remaining service life indicators; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Timers; elapsed time indicators; remaining service life indicators; minimum requirements. 84.83 Section 84.83 Public Health PUBLIC HEALTH SERVICE... indicators; remaining service life indicators; minimum requirements. (a) Elapsed time indicators shall be...

12 CFR 325.6 - Issuance of directives.

Code of Federal Regulations, 2010 CFR

2010-01-01

... is a final order issued to a bank that fails to maintain capital at or above the minimum leverage... operating with less than the minimum leverage capital requirement established by this regulation, the Board... directive requiring the bank to restore its capital to the minimum leverage capital requirement within a...

49 CFR 236.0 - Applicability, minimum requirements, and penalties.

Code of Federal Regulations, 2013 CFR

2013-10-01

... persons, or has caused death or injury, a penalty not to exceed $105,000 per violation may be assessed... 49 Transportation 4 2013-10-01 2013-10-01 false Applicability, minimum requirements, and penalties... § 236.0 Applicability, minimum requirements, and penalties. (a) Except as provided in paragraph (b) of...

49 CFR 236.0 - Applicability, minimum requirements, and penalties.

Code of Federal Regulations, 2014 CFR

2014-10-01

... persons, or has caused death or injury, a penalty not to exceed $105,000 per violation may be assessed... 49 Transportation 4 2014-10-01 2014-10-01 false Applicability, minimum requirements, and penalties... § 236.0 Applicability, minimum requirements, and penalties. (a) Except as provided in paragraph (b) of...

49 CFR 236.0 - Applicability, minimum requirements, and penalties.

Code of Federal Regulations, 2011 CFR

2011-10-01

... persons, or has caused death or injury, a penalty not to exceed $100,000 per violation may be assessed... 49 Transportation 4 2011-10-01 2011-10-01 false Applicability, minimum requirements, and penalties... § 236.0 Applicability, minimum requirements, and penalties. (a) Except as provided in paragraph (b) of...

49 CFR 236.0 - Applicability, minimum requirements, and penalties.

Code of Federal Regulations, 2012 CFR

2012-10-01

... persons, or has caused death or injury, a penalty not to exceed $105,000 per violation may be assessed... 49 Transportation 4 2012-10-01 2012-10-01 false Applicability, minimum requirements, and penalties... § 236.0 Applicability, minimum requirements, and penalties. (a) Except as provided in paragraph (b) of...

49 CFR 236.0 - Applicability, minimum requirements, and penalties.

Code of Federal Regulations, 2010 CFR

2010-10-01

... persons, or has caused death or injury, a penalty not to exceed $100,000 per violation may be assessed... 49 Transportation 4 2010-10-01 2010-10-01 false Applicability, minimum requirements, and penalties... § 236.0 Applicability, minimum requirements, and penalties. (a) Except as provided in paragraph (b) of...

Analyzing Quadratic Unconstrained Binary Optimization Problems Via Multicommodity Flows

PubMed Central

Wang, Di; Kleinberg, Robert D.

2009-01-01

Quadratic Unconstrained Binary Optimization (QUBO) problems concern the minimization of quadratic polynomials in n {0, 1}-valued variables. These problems are NP-complete, but prior work has identified a sequence of polynomial-time computable lower bounds on the minimum value, denoted by C2, C3, C4,…. It is known that C2 can be computed by solving a maximum-flow problem, whereas the only previously known algorithms for computing Ck (k > 2) require solving a linear program. In this paper we prove that C3 can be computed by solving a maximum multicommodity flow problem in a graph constructed from the quadratic function. In addition to providing a lower bound on the minimum value of the quadratic function on {0, 1}n, this multicommodity flow problem also provides some information about the coordinates of the point where this minimum is achieved. By looking at the edges that are never saturated in any maximum multicommodity flow, we can identify relational persistencies: pairs of variables that must have the same or different values in any minimizing assignment. We furthermore show that all of these persistencies can be detected by solving single-commodity flow problems in the same network. PMID:20161596

Analyzing Quadratic Unconstrained Binary Optimization Problems Via Multicommodity Flows.

PubMed

Wang, Di; Kleinberg, Robert D

2009-11-28

Quadratic Unconstrained Binary Optimization (QUBO) problems concern the minimization of quadratic polynomials in n {0, 1}-valued variables. These problems are NP-complete, but prior work has identified a sequence of polynomial-time computable lower bounds on the minimum value, denoted by C(2), C(3), C(4),…. It is known that C(2) can be computed by solving a maximum-flow problem, whereas the only previously known algorithms for computing C(k) (k > 2) require solving a linear program. In this paper we prove that C(3) can be computed by solving a maximum multicommodity flow problem in a graph constructed from the quadratic function. In addition to providing a lower bound on the minimum value of the quadratic function on {0, 1}(n), this multicommodity flow problem also provides some information about the coordinates of the point where this minimum is achieved. By looking at the edges that are never saturated in any maximum multicommodity flow, we can identify relational persistencies: pairs of variables that must have the same or different values in any minimizing assignment. We furthermore show that all of these persistencies can be detected by solving single-commodity flow problems in the same network.

23 CFR 635.127 - Agreement provisions regarding overruns in contract time.

Code of Federal Regulations, 2012 CFR

2012-04-01

... ENGINEERING AND TRAFFIC OPERATIONS CONSTRUCTION AND MAINTENANCE Contract Procedures § 635.127 Agreement... types. These rates shall, as a minimum, be established to cover the estimated average daily construction... proportional share, as used in this section, is the ratio of the final contract construction costs eligible for...

23 CFR 635.127 - Agreement provisions regarding overruns in contract time.

Code of Federal Regulations, 2013 CFR

2013-04-01

... ENGINEERING AND TRAFFIC OPERATIONS CONSTRUCTION AND MAINTENANCE Contract Procedures § 635.127 Agreement... types. These rates shall, as a minimum, be established to cover the estimated average daily construction... proportional share, as used in this section, is the ratio of the final contract construction costs eligible for...

23 CFR 635.127 - Agreement provisions regarding overruns in contract time.

Code of Federal Regulations, 2010 CFR

2010-04-01

... ENGINEERING AND TRAFFIC OPERATIONS CONSTRUCTION AND MAINTENANCE Contract Procedures § 635.127 Agreement... types. These rates shall, as a minimum, be established to cover the estimated average daily construction... proportional share, as used in this section, is the ratio of the final contract construction costs eligible for...

23 CFR 635.127 - Agreement provisions regarding overruns in contract time.

Code of Federal Regulations, 2014 CFR

2014-04-01

... ENGINEERING AND TRAFFIC OPERATIONS CONSTRUCTION AND MAINTENANCE Contract Procedures § 635.127 Agreement... types. These rates shall, as a minimum, be established to cover the estimated average daily construction... proportional share, as used in this section, is the ratio of the final contract construction costs eligible for...

23 CFR 635.127 - Agreement provisions regarding overruns in contract time.

Code of Federal Regulations, 2011 CFR

2011-04-01

... ENGINEERING AND TRAFFIC OPERATIONS CONSTRUCTION AND MAINTENANCE Contract Procedures § 635.127 Agreement... types. These rates shall, as a minimum, be established to cover the estimated average daily construction... proportional share, as used in this section, is the ratio of the final contract construction costs eligible for...

24 CFR 3286.505 - Minimum elements to be inspected.

Code of Federal Regulations, 2010 CFR

2010-04-01

... with respect to home design and construction; (b) Consideration of site-specific conditions; (c) Site... HOUSING AND URBAN DEVELOPMENT MANUFACTURED HOME INSTALLATION PROGRAM Inspection of Installations in HUD-Administered States § 3286.505 Minimum elements to be inspected. The installation of every manufactured home...

30 CFR 75.518-1 - Electric equipment and circuits; overload and short circuit protection; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Electric equipment and circuits; overload and short circuit protection; minimum requirements. 75.518-1 Section 75.518-1 Mineral Resources MINE SAFETY... short circuit protection; minimum requirements. A device to provide either short circuit protection or...

5 CFR 532.205 - The use of Federal, State, and local minimum wage requirements in determining prevailing rates.

Code of Federal Regulations, 2010 CFR

2010-01-01

... minimum wage requirements in determining prevailing rates. 532.205 Section 532.205 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PREVAILING RATE SYSTEMS Prevailing Rate Determinations § 532.205 The use of Federal, State, and local minimum wage requirements in determining prevailing...

26 CFR 1.410(b)-1 - Minimum coverage requirements (before 1994).

Code of Federal Regulations, 2011 CFR

2011-04-01

... (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Pension, Profit-Sharing, Stock Bonus Plans, Etc... the minimum age and service requirements (if any) prescribed by the plan, as of the date coverage is... employees (including employees who do not satisfy the minimum age or service requirements of the plan) are...

46 CFR 52.05-30 - Minimum requirements for attachment welds (modifies PW-16).

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Minimum requirements for attachment welds (modifies PW-16). 52.05-30 Section 52.05-30 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING POWER BOILERS Requirements for Boilers Fabricated by Welding § 52.05-30 Minimum...

42 CFR 84.156 - Airflow resistance test; Type C supplied-air respirator, demand class; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... C supplied-air respirator, demand class; minimum requirements. (a) Inhalation resistance shall not... 42 Public Health 1 2010-10-01 2010-10-01 false Airflow resistance test; Type C supplied-air respirator, demand class; minimum requirements. 84.156 Section 84.156 Public Health PUBLIC HEALTH SERVICE...

17 CFR 5.7 - Minimum financial requirements for retail foreign exchange dealers and futures commission...

Code of Federal Regulations, 2011 CFR

2011-04-01

... 17 Commodity and Securities Exchanges 1 2011-04-01 2011-04-01 false Minimum financial requirements... forex transactions. 5.7 Section 5.7 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION OFF-EXCHANGE FOREIGN CURRENCY TRANSACTIONS § 5.7 Minimum financial requirements for retail foreign...

40 CFR 131.6 - Minimum requirements for water quality standards submission.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 21 2010-07-01 2010-07-01 false Minimum requirements for water quality standards submission. 131.6 Section 131.6 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS WATER QUALITY STANDARDS General Provisions § 131.6 Minimum requirements for water quality standards submission. The...

40 CFR 131.6 - Minimum requirements for water quality standards submission.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 22 2011-07-01 2011-07-01 false Minimum requirements for water quality standards submission. 131.6 Section 131.6 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS WATER QUALITY STANDARDS General Provisions § 131.6 Minimum requirements for water quality standards submission. The...

46 CFR 52.05-30 - Minimum requirements for attachment welds (modifies PW-16).

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 2 2011-10-01 2011-10-01 false Minimum requirements for attachment welds (modifies PW-16). 52.05-30 Section 52.05-30 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING POWER BOILERS Requirements for Boilers Fabricated by Welding § 52.05-30 Minimum...

46 CFR 52.05-30 - Minimum requirements for attachment welds (modifies PW-16).

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 2 2012-10-01 2012-10-01 false Minimum requirements for attachment welds (modifies PW-16). 52.05-30 Section 52.05-30 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING POWER BOILERS Requirements for Boilers Fabricated by Welding § 52.05-30 Minimum...

46 CFR 52.05-30 - Minimum requirements for attachment welds (modifies PW-16).

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 2 2013-10-01 2013-10-01 false Minimum requirements for attachment welds (modifies PW-16). 52.05-30 Section 52.05-30 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING POWER BOILERS Requirements for Boilers Fabricated by Welding § 52.05-30 Minimum...

46 CFR 52.05-30 - Minimum requirements for attachment welds (modifies PW-16).

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 2 2014-10-01 2014-10-01 false Minimum requirements for attachment welds (modifies PW-16). 52.05-30 Section 52.05-30 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING POWER BOILERS Requirements for Boilers Fabricated by Welding § 52.05-30 Minimum...

Models and Methods of Aggregating Linguistic Information in Multi-criteria Hierarchical Quality Assessment Systems

NASA Astrophysics Data System (ADS)

Azarnova, T. V.; Titova, I. A.; Barkalov, S. A.

2018-03-01

The article presents an algorithm for obtaining an integral assessment of the quality of an organization from the perspective of customers, based on the method of aggregating linguistic information on a multilevel hierarchical system of quality assessment. The algorithm is of a constructive nature, it provides not only the possibility of obtaining an integral evaluation, but also the development of a quality improvement strategy based on the method of linguistic decomposition, which forms the minimum set of areas of work with clients whose quality change will allow obtaining the required level of integrated quality assessment.

Supplemental Environmental Assessment for the Proposed Construction of Personally Owned Vehicle (POV) Parking for 113th Wing, District of Columbia Air National Guard Joint Base Andrews-Naval Facility, Washington, Prince George’s County, MD

DTIC Science & Technology

2013-05-01

Environment ( MDE ) and the Army Corps of Engineers, shows that this specific site is not developed. At this time, the site is covered by a mature mixed... MDE . During the EA development process, other alternative locations, as noted in paragraph 2.2, were reviewed under the requirements of the...DOD 2012 Unified Facilities Criteria. DOD Minimum Antiterrorism Standards for Buildings. UFC 4- 010-01. February 2012. MDE 2011 Maryland Non

10 CFR 905.16 - What are the requirements for the minimum investment report alternative?

Code of Federal Regulations, 2010 CFR

2010-01-01

... number, email and Website if applicable, and contact person; (2) Authority or requirement to undertake a..., in writing, a minimum investment report every 5 years. (h) Maintaining minimum investment reports. (1...

Growing trees in child brains: graph theoretical analysis of electroencephalography-derived minimum spanning tree in 5- and 7-year-old children reflects brain maturation.

PubMed

Boersma, Maria; Smit, Dirk J A; Boomsma, Dorret I; De Geus, Eco J C; Delemarre-van de Waal, Henriette A; Stam, Cornelis J

2013-01-01

The child brain is a small-world network, which is hypothesized to change toward more ordered configurations with development. In graph theoretical studies, comparing network topologies under different conditions remains a critical point. Constructing a minimum spanning tree (MST) might present a solution, since it does not require setting a threshold and uses a fixed number of nodes and edges. In this study, the MST method is introduced to examine developmental changes in functional brain network topology in young children. Resting-state electroencephalography was recorded from 227 children twice at 5 and 7 years of age. Synchronization likelihood (SL) weighted matrices were calculated in three different frequency bands from which MSTs were constructed, which represent constructs of the most important routes for information flow in a network. From these trees, several parameters were calculated to characterize developmental change in network organization. The MST diameter and eccentricity significantly increased, while the leaf number and hierarchy significantly decreased in the alpha band with development. Boys showed significant higher leaf number, betweenness, degree and hierarchy and significant lower SL, diameter, and eccentricity than girls in the theta band. The developmental changes indicate a shift toward more decentralized line-like trees, which supports the previously hypothesized increase toward regularity of brain networks with development. Additionally, girls showed more line-like decentralized configurations, which is consistent with the view that girls are ahead of boys in brain development. MST provides an elegant method sensitive to capture subtle developmental changes in network organization without the bias of network comparison.

A Viable Scheme for Elemental Extraction and Purification Using In-Situ Planetary Resources

NASA Technical Reports Server (NTRS)

Sen, S.; Schofield, E.; ODell, S.; Ray, C. S.

2005-01-01

NASA's new strategic direction includes establishing a self-sufficient, affordable and safe human and robotic presence outside the low earth orbit. Some of the items required for a self-sufficient extra-terrestrial habitat will include materials for power generation (e.g. Si for solar cells) and habitat construction (e.g. Al, Fe, and Ti). In this paper we will present a viable elemental extraction and refining process from in-situ regolith which would be optimally continuous, robotically automated, and require a minimum amount of astronaut supervision and containment facilities, The approach is based on using a concentrated heat source and translating sample geometry to enable simultaneous oxide reduction and elemental refining. Preliminary results will be presented to demonstrate that the proposed zone refining process is capable of segregating or refining important elements such as Si (for solar cell fabrication) and Fe (for habitat construction). A conceptual scheme will be presented whereby such a process could be supported by use of solar energy and a precursor robotic mission on the surface of the moon.

Development Requirements for Spacesuit Elbow Joint

NASA Technical Reports Server (NTRS)

Peters, Benjamin

2017-01-01

Functional Requirements for spacesuit elbow joint:1) The system is a conformal, single-axis spacesuit pressurized joint that encloses the elbow joint of the suited user and uses a defined interface to connect to the suit systems on either side of the joint.2) The system shall be designed to bear the loads incurred from the internal pressure of the system, as well as the expected loads induced by the user while enabling the user move the joint through the required range of motion. The joint torque of the system experienced by the user shall remain at or below the required specification for the entire range of motion.3) The design shall be constructed, at a minimum, as a two-layer system. The internal, air-tight layer shall be referred to as the bladder, and the layer on the unpressurized side of the bladder shall be referred to as the restraint. The design of the system may include additional features or layers, such as axial webbing, to meet the overall requirements of the design.

A method for minimum risk portfolio optimization under hybrid uncertainty

NASA Astrophysics Data System (ADS)

Egorova, Yu E.; Yazenin, A. V.

2018-03-01

In this paper, we investigate a minimum risk portfolio model under hybrid uncertainty when the profitability of financial assets is described by fuzzy random variables. According to Feng, the variance of a portfolio is defined as a crisp value. To aggregate fuzzy information the weakest (drastic) t-norm is used. We construct an equivalent stochastic problem of the minimum risk portfolio model and specify the stochastic penalty method for solving it.

46 CFR 160.035-3 - Construction of steel oar-propelled lifeboats.

Code of Federal Regulations, 2010 CFR

2010-10-01

... apparatus shall have a minimum factor of safety of six. (2) For construction and capacity of disengaging... shall be galvanized by the hot dipped process. All fabricated pieces or sections are to be galvanized...

30 CFR 250.908 - What are the minimum structural fatigue design requirements?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What are the minimum structural fatigue design... Platform Approval Program § 250.908 What are the minimum structural fatigue design requirements? (a) API RP... (incorporated by reference as specified in 30 CFR 250.198), requires that the design fatigue life of each joint...

13 CFR 120.473 - Procedures for determining individual minimum capital requirement.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) Decision. After the close of the SBLC's response period, the AA/CA will decide, based on a review of SBA... requirement by the specified date, either the SBLC or the AA/CA may propose to the other a change in the... determining individual minimum capital requirement. (a) Notice. When SBA determines that an individual minimum...

26 CFR 1.412(c)(1)-3 - Applying the minimum funding requirements to restored plans.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 26 Internal Revenue 5 2013-04-01 2013-04-01 false Applying the minimum funding requirements to..., Stock Bonus Plans, Etc. § 1.412(c)(1)-3 Applying the minimum funding requirements to restored plans. (a) In general—(1) Restoration method. The restoration method is a funding method that adapts the...

[Impacts of forest and precipitation on runoff and sediment in Tianshui watershed and GM models].

PubMed

Ouyang, H

2000-12-01

This paper analyzed the impacts of foret stand volume and precipitation on annual erosion modulus, mean sediment, maximum sediment, mean runoff, maximum runoff, minimum runoff, mean water level, maximum water level and minimum water level in Tianshui watershed, and also analyzed the effect of the variation of forest stand volume on monthly mean runoff, minimum runoff and mean water level. The dynamic models of grey system GM(1, N) were constructed to simulate the changes of these hydrological elements. The dynamic GM models on the impact of stand volumes of different forest types(Chinese fir, masson pine and broad-leaved forests) with different age classes(young, middle-aged, mature and over-mature) and that of precipitation on the hydrological elements were also constructed, and their changes with time were analyzed.

Thermodynamic geometry of minimum-dissipation driven barrier crossing

NASA Astrophysics Data System (ADS)

Sivak, David A.; Crooks, Gavin E.

2016-11-01

We explore the thermodynamic geometry of a simple system that models the bistable dynamics of nucleic acid hairpins in single molecule force-extension experiments. Near equilibrium, optimal (minimum-dissipation) driving protocols are governed by a generalized linear response friction coefficient. Our analysis demonstrates that the friction coefficient of the driving protocols is sharply peaked at the interface between metastable regions, which leads to minimum-dissipation protocols that drive rapidly within a metastable basin, but then linger longest at the interface, giving thermal fluctuations maximal time to kick the system over the barrier. Intuitively, the same principle applies generically in free energy estimation (both in steered molecular dynamics simulations and in single-molecule experiments), provides a design principle for the construction of thermodynamically efficient coupling between stochastic objects, and makes a prediction regarding the construction of evolved biomolecular motors.

Thermodynamic geometry of minimum-dissipation driven barrier crossing

NASA Astrophysics Data System (ADS)

Sivak, David; Crooks, Gavin

We explore the thermodynamic geometry of a simple system that models the bistable dynamics of nucleic acid hairpins in single molecule force-extension experiments. Near equilibrium, optimal (minimum-dissipation) driving protocols are governed by a generalized linear response friction coefficient. Our analysis demonstrates that the friction coefficient of the driving protocols is sharply peaked at the interface between metastable regions, which leads to minimum-dissipation protocols that drive rapidly within a metastable basin, but then linger longest at the interface, giving thermal fluctuations maximal time to kick the system over the barrier. Intuitively, the same principle applies generically in free energy estimation (both in steered molecular dynamics simulations and in single-molecule experiments), provides a design principle for the construction of thermodynamically efficient coupling between stochastic objects, and makes a prediction regarding the construction of evolved biomolecular motors.

75 FR 77229 - Federal Requirements Under the Underground Injection Control (UIC) Program for Carbon Dioxide (CO2

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-10

...This action finalizes minimum Federal requirements under the Safe Drinking Water Act (SDWA) for underground injection of carbon dioxide (CO2) for the purpose of geologic sequestration (GS). GS is one of a portfolio of options that could be deployed to reduce CO2 emissions to the atmosphere and help to mitigate climate change. This final rule applies to owners or operators of wells that will be used to inject CO2 into the subsurface for the purpose of long-term storage. It establishes a new class of well, Class VI, and sets minimum technical criteria for the permitting, geologic site characterization, area of review (AoR) and corrective action, financial responsibility, well construction, operation, mechanical integrity testing (MIT), monitoring, well plugging, post-injection site care (PISC), and site closure of Class VI wells for the purposes of protecting underground sources of drinking water (USDWs). The elements of this rulemaking are based on the existing Underground Injection Control (UIC) regulatory framework, with modifications to address the unique nature of CO2 injection for GS. This rule will help ensure consistency in permitting underground injection of CO2 at GS operations across the United States and provide requirements to prevent endangerment of USDWs in anticipation of the eventual use of GS to reduce CO2 emissions to the atmosphere and to mitigate climate change.

Emergency Response Capability Baseline Needs Assessment - Compliance Assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sharry, John A.

This document was prepared by John A. Sharry, LLNL Fire Marshal and Division Leader for Fire Protection and was reviewed by LLNL Emergency Management Department Head, James Colson. This document is the second of a two-part analysis on Emergency Response Capabilities of Lawrence Livermore National Laboratory. The first part, 2016 Baseline Needs Assessment Requirements Document established the minimum performance criteria necessary to meet mandatory requirements. This second part analyses the performance of Lawrence Livermore Laboratory Emergency Management Department to the contents of the Requirements Document. The document was prepared based on an extensive review of information contained in the 2016more » BNA, a review of Emergency Planning Hazards Assessments, a review of building construction, occupancy, fire protection features, dispatch records, LLNL alarm system records, fire department training records, and fire department policies and procedures. The 2013 BNA was approved by NNSA’s Livermore Field Office on January 22, 2014.« less

Controlling hazardous energy sources (lockout/tagout)

NASA Technical Reports Server (NTRS)

Dominguez, Manuel B.

1991-01-01

The minimum requirements as established by the Occupational Safety and Health Administration (OSHA) standard 29 CFR 1910.147 are discussed for preventing the unexpected operation of equipment or release of energy which could cause injury to personnel, damage to equipment, harm to the environment, or loss or compromise of test data. Safety requirements both for government and contractor personnel are explained for potentially hazardous energy sources during work operations at LeRC (Cleveland and Plum Brook Stations). Basic rules are presented to ensure protection against harmful exposures, and baseline implementation requirements are discussed from which detailed lockout/tagout procedures can be developed for individual equipment items. Examples of energy sources covered by this document include electrical, pneumatic, mechanical, chemical, cryogenic, thermal, spring tension/compression suspended or moving loads, and other potentially hazardous sources. Activities covered by this standard include, but are not limited to, construction, maintenance, installation, calibration, inspection, cleaning, or repair.

Controlling hazardous energy sources (lockout/tagout)

NASA Astrophysics Data System (ADS)

Dominguez, Manuel B.

1991-10-01

The minimum requirements as established by the Occupational Safety and Health Administration (OSHA) standard 29 CFR 1910.147 are discussed for preventing the unexpected operation of equipment or release of energy which could cause injury to personnel, damage to equipment, harm to the environment, or loss or compromise of test data. Safety requirements both for government and contractor personnel are explained for potentially hazardous energy sources during work operations at LeRC (Cleveland and Plum Brook Stations). Basic rules are presented to ensure protection against harmful exposures, and baseline implementation requirements are discussed from which detailed lockout/tagout procedures can be developed for individual equipment items. Examples of energy sources covered by this document include electrical, pneumatic, mechanical, chemical, cryogenic, thermal, spring tension/compression suspended or moving loads, and other potentially hazardous sources. Activities covered by this standard include, but are not limited to, construction, maintenance, installation, calibration, inspection, cleaning, or repair.

Evaluation of Minimum Asphalt Concrete Thickness Criteria

DTIC Science & Technology

2008-10-01

9 Figure 6. Dry density versus moisture content for CH material... density measurements. ............................ 24 Figure 18. EPC installation in a crushed gravel base course layer...Construction Materials Materials Characterization Laboratory Testing Field Testing Test Section Construction Hydrometer, Modified Proctor , Specific

Occam’s Quantum Strop: Synchronizing and Compressing Classical Cryptic Processes via a Quantum Channel

NASA Astrophysics Data System (ADS)

Mahoney, John R.; Aghamohammadi, Cina; Crutchfield, James P.

2016-02-01

A stochastic process’ statistical complexity stands out as a fundamental property: the minimum information required to synchronize one process generator to another. How much information is required, though, when synchronizing over a quantum channel? Recent work demonstrated that representing causal similarity as quantum state-indistinguishability provides a quantum advantage. We generalize this to synchronization and offer a sequence of constructions that exploit extended causal structures, finding substantial increase of the quantum advantage. We demonstrate that maximum compression is determined by the process’ cryptic order-a classical, topological property closely allied to Markov order, itself a measure of historical dependence. We introduce an efficient algorithm that computes the quantum advantage and close noting that the advantage comes at a cost-one trades off prediction for generation complexity.

Occam's Quantum Strop: Synchronizing and Compressing Classical Cryptic Processes via a Quantum Channel.

PubMed

Mahoney, John R; Aghamohammadi, Cina; Crutchfield, James P

2016-02-15

A stochastic process' statistical complexity stands out as a fundamental property: the minimum information required to synchronize one process generator to another. How much information is required, though, when synchronizing over a quantum channel? Recent work demonstrated that representing causal similarity as quantum state-indistinguishability provides a quantum advantage. We generalize this to synchronization and offer a sequence of constructions that exploit extended causal structures, finding substantial increase of the quantum advantage. We demonstrate that maximum compression is determined by the process' cryptic order--a classical, topological property closely allied to Markov order, itself a measure of historical dependence. We introduce an efficient algorithm that computes the quantum advantage and close noting that the advantage comes at a cost-one trades off prediction for generation complexity.

26 CFR 1.412(c)(1)-3T - Applying the minimum funding requirements to restored plans (temporary).

Code of Federal Regulations, 2013 CFR

2013-04-01

... 26 Internal Revenue 5 2013-04-01 2013-04-01 false Applying the minimum funding requirements to...-Sharing, Stock Bonus Plans, Etc. § 1.412(c)(1)-3T Applying the minimum funding requirements to restored plans (temporary). (a) In general—(1) Restoration method. The restoration method is a funding method...

26 CFR 1.401(a)(9)-6 - Required minimum distributions for defined benefit plans and annuity contracts.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 5 2010-04-01 2010-04-01 false Required minimum distributions for defined...-Sharing, Stock Bonus Plans, Etc. § 1.401(a)(9)-6 Required minimum distributions for defined benefit plans and annuity contracts. Q-1. How must distributions under a defined benefit plan be paid in order to...

Scaling-up the minimum requirements analysis for big wilderness issues

Treesearch

David N. Cole

2007-01-01

The concept of applying a "minimum requirements" analysis to decisions about administrative actions in wilderness in the United States has been around for a long time. It comes from Section 4(c) of the Wilderness Act of 1964, which states that "except as necessary to meet minimum requirements for the administration of the area for the purposes of this...

Practical considerations for coil-wrapped Distributed Temperature Sensing setups

NASA Astrophysics Data System (ADS)

Solcerova, Anna; van Emmerik, Tim; Hilgersom, Koen; van de Giesen, Nick

2015-04-01

Fiber-optic Distributed Temperature Sensing (DTS) has been applied widely in hydrological and meteorological systems. For example, DTS has been used to measure streamflow, groundwater, soil moisture and temperature, air temperature, and lake energy fluxes. Many of these applications require a spatial monitoring resolution smaller than the minimum resolution of the DTS device. Therefore, measuring with these resolutions requires a custom made setup. To obtain both high temporal and high spatial resolution temperature measurements, fiber-optic cable is often wrapped around, and glued to, a coil, for example a PVC conduit. For these setups, it is often assumed that the construction characteristics (e.g., the coil material, shape, diameter) do not influence the DTS temperature measurements significantly. This study compares DTS datasets obtained during four measurement campaigns. The datasets were acquired using different setups, allowing to investigate the influence of the construction characteristics on the monitoring results. This comparative study suggests that the construction material, shape, diameter, and way of attachment can have a significant influence on the results. We present a qualitative and quantitative approximation of errors introduced through the selection of the construction, e.g., choice of coil material, influence of solar radiation, coil diameter, and cable attachment method. Our aim is to provide insight in factors that influence DTS measurements, which designers of future DTS measurements setups can take into account. Moreover, we present a number of solutions to minimize these errors for improved temperature retrieval using DTS.

Development of minimum state requirements for local growth management policies : phase 1.

DOT National Transportation Integrated Search

2015-01-01

This research entailed the development of minimum requirements for local growth management policies for use in Louisiana. The purpose of developing minimum statewide standards is to try to alleviate some of the stress placed on state and local govern...

Development of minimum state requirements for local growth management policies -- phase 1.

DOT National Transportation Integrated Search

2015-11-01

This research entailed the development of minimum requirements for local growth management policies for use : in Louisiana. The purpose of developing minimum statewide standards is to try to alleviate some of the stress : placed on state and local go...

Formulation design for optimal high-shear wet granulation using on-line torque measurements.

PubMed

Cavinato, Mauro; Bresciani, Massimo; Machin, Marianna; Bellazzi, Guido; Canu, Paolo; Santomaso, Andrea C

2010-03-15

An alternative procedure for achieving formulation design in a high-shear wet granulation process has been developed. Particularly, a new formulation map has been proposed which describes the onset of a significant granule growth as a function of the formulation variables (diluent, dry and liquid binder). Granule growth has been monitored using on-line impeller torque and evaluated as changes in granule particle size distribution with respect to the dry formulation. It is shown how the onset of granule growth is denoted by an abrupt increase in the torque value requires the amount of binder liquid added to be greater than a certain threshold that is identified here as 'minimum liquid volume'. This minimum liquid volume is determined as a function of dry binder type, amount, hygroscopicity and particle size distribution of diluent. It is also demonstrated how this formulation map can be constructed from independent measurements of binder glass transition temperatures using a static humidity conditioning system. 2009 Elsevier B.V. All rights reserved.

Wing planform geometry effects on large subsonic military transport airplanes. Final technical report March 1976-February 1977

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kulfan, R.M.; Vachal, J.D.

1978-02-01

A Preliminary Design Study of large turbulent flow military transport aircraft has been made. The study airplanes were designed to carry a heavy payload (350,000 lb) for a long range (10,000 nmi). The study tasks included: Wing geometry/cruise speed optimization of a large cantilever wing military transport airplane; Preliminary design and performance evaluation of a strut-braced wing transport airplane; and Structural analyses of large-span cantilever and strut-braced wings of graphite/epoxy sandwich construction (1985 technology). The best cantilever wing planform for minimum takeoff gross weight, and minimum fuel requirements, as determined using statistical weight evaluations, has a high aspect ratio, lowmore » sweep, low thickness/chord ratio, and a cruise Mach number of 0.76. A near optimum wing planform with greater speed capability (M = 0.78) has an aspect ratio = 12, quarter chord sweep = 20 deg, and thickness/chord ratio of 0.14/0.08 (inboard/outboard).« less

Comparative mapping and rapid karyotypic evolution in the genus helianthus.

PubMed Central

Burke, John M; Lai, Zhao; Salmaso, Marzia; Nakazato, Takuya; Tang, Shunxue; Heesacker, Adam; Knapp, Steven J; Rieseberg, Loren H

2004-01-01

Comparative genetic linkage maps provide a powerful tool for the study of karyotypic evolution. We constructed a joint SSR/RAPD genetic linkage map of the Helianthus petiolaris genome and used it, along with an integrated SSR genetic linkage map derived from four independent H. annuus mapping populations, to examine the evolution of genome structure between these two annual sunflower species. The results of this work indicate the presence of 27 colinear segments resulting from a minimum of eight translocations and three inversions. These 11 rearrangements are more than previously suspected on the basis of either cytological or genetic map-based analyses. Taken together, these rearrangements required a minimum of 20 chromosomal breakages/fusions. On the basis of estimates of the time since divergence of these two species (750,000-1,000,000 years), this translates into an estimated rate of 5.5-7.3 chromosomal rearrangements per million years of evolution, the highest rate reported for any taxonomic group to date. PMID:15166168

Cloning of genes involved in the biosynthesis of pseudobactin, a high-affinity iron transport agent of a plant growth-promoting Pseudomonas strain.

PubMed Central

Moores, J C; Magazin, M; Ditta, G S; Leong, J

1984-01-01

A gene bank of DNA from plant growth-promoting Pseudomonas sp. strain B10 was constructed using the broad host-range conjugative cosmid pLAFR1. The recombinant cosmids contained insert DNA averaging 21.5 kilobase pairs in length. Nonfluorescent mutants of Pseudomonas sp. strain B10 were obtained by mutagenesis with N-methyl-N'-nitro-N-nitrosoguanidine, ethyl methanesulfonate, or UV light and were defective in the biosynthesis of its yellow-green, fluorescent siderophore (microbial iron transport agent) pseudobactin. No yellow-green, fluorescent mutants defective in the production of pseudobactin were identified. Nonfluorescent mutants were individually complemented by mating the gene bank en masse and identifying fluorescent transconjugants. Eight recombinant cosmids were sufficient to complement 154 nonfluorescent mutants. The pattern of complementation suggests that a minimum of 12 genes arranged in four gene clusters is required for the biosynthesis of pseudobactin. This minimum number of genes seems reasonable considering the structural complexity of pseudobactin. Images PMID:6690426

Nonlinear Control Theory for Missile Autopilot Design.

DTIC Science & Technology

1987-04-24

minimum-time controller which includes constraints on both controls and angle-of-attack is developed and an example is given. -12- - - -~ *% PO PmCF E- A...constructed. In this case, some ideas from robotics on minimum-time trajectory planning under path constraints (see, e.g., Rajan (1985), Sahar and...Auto Cont., Vol. AC-29, No. 4, p. 361. Rajan, V.T. (1985), "Minimum-Time Trajectory Planning ", Proc IEEE Kobotics and Automation Conf., St. Louis. Reed

Minimum Disclosure Counting for the Alternative Vote

NASA Astrophysics Data System (ADS)

Wen, Roland; Buckland, Richard

Although there is a substantial body of work on preventing bribery and coercion of voters in cryptographic election schemes for plurality electoral systems, there are few attempts to construct such schemes for preferential electoral systems. The problem is preferential systems are prone to bribery and coercion via subtle signature attacks during the counting. We introduce a minimum disclosure counting scheme for the alternative vote preferential system. Minimum disclosure provides protection from signature attacks by revealing only the winning candidate.

Engineering geology studies in the National Petroleum Reserve, Alaska

USGS Publications Warehouse

Kachadoorian, Reuben; Crory, F.E.

1984-01-01

Engineering geology studies were conducted in direct support of the exploration program in the National Petroleum Reserve, Alaska. The studies included laboratory and field tests and observations to address design and construction problems of airfields, roads, drill pads and foundations, and to evaluate their actual performance. Permafrost containing large amounts of near surface ground ice as wedges, masses, and intergranular ice, required that all construction activity not disturb the thermal regime of the ground surface, which could lead to thaw of permafrost and ground subsidence. Summer activity, therefore was not allowable, yet the winter climate was so harsh that winter work was slow and inefficient. To allow summer operations at well sites planned for all year activity, it was necessary to adapt existing techniques for arctic construction and to devise new ones. The design and construction of facilities at the deep exploration wells at Inigok, Tunalik, and Lisburne posed the greatest challenge. These sites, requiring a year or more to drill, could only be attempted if continuous access to drilling and logistic supplies could be assured throughout the year, including the possibility of bringing in another drill rig, in the event of a blowout. Thus all-seasons airstrips were required at these wells. Sufficient quantities of local gravel were not readily available at the Inigok and Tunalik sites to construct the airstrips with the required 6 feet or more of gravel to prevent the underlying permafrost from thawing. Therefore, insulation was used to maintain the subbase of local sands in a continuously frozen state, which in turn was overlain by 15 inches of gravel or sandy gravel. Tests at the U.S. Army Waterways Experimental Station defined the minimum thickness of gravel required above the insulation to provide the desired bearing capacity for the C-130 type aircraft without crushing the insulation. Field testing also included the evaluation of another design option, using military landing mat underlain by insulation. Temperature recording devices were installed beneath the landing mat test sections, insulated runways, roads, drill pads, and reserve pits, to monitor the actual conditions and confirm the design assumptions. Investigations of thaw-settlement, erosion, and revegetation of all areas affected by construction were also conducted in anticipation of abandoning the sites, or, upgrading the facilities in the event the design life was extended.

Comparing Phylogenetic Trees by Matching Nodes Using the Transfer Distance Between Partitions

PubMed Central

Giaro, Krzysztof

2017-01-01

Abstract Ability to quantify dissimilarity of different phylogenetic trees describing the relationship between the same group of taxa is required in various types of phylogenetic studies. For example, such metrics are used to assess the quality of phylogeny construction methods, to define optimization criteria in supertree building algorithms, or to find horizontal gene transfer (HGT) events. Among the set of metrics described so far in the literature, the most commonly used seems to be the Robinson–Foulds distance. In this article, we define a new metric for rooted trees—the Matching Pair (MP) distance. The MP metric uses the concept of the minimum-weight perfect matching in a complete bipartite graph constructed from partitions of all pairs of leaves of the compared phylogenetic trees. We analyze the properties of the MP metric and present computational experiments showing its potential applicability in tasks related to finding the HGT events. PMID:28177699

Comparing Phylogenetic Trees by Matching Nodes Using the Transfer Distance Between Partitions.

PubMed

Bogdanowicz, Damian; Giaro, Krzysztof

2017-05-01

Ability to quantify dissimilarity of different phylogenetic trees describing the relationship between the same group of taxa is required in various types of phylogenetic studies. For example, such metrics are used to assess the quality of phylogeny construction methods, to define optimization criteria in supertree building algorithms, or to find horizontal gene transfer (HGT) events. Among the set of metrics described so far in the literature, the most commonly used seems to be the Robinson-Foulds distance. In this article, we define a new metric for rooted trees-the Matching Pair (MP) distance. The MP metric uses the concept of the minimum-weight perfect matching in a complete bipartite graph constructed from partitions of all pairs of leaves of the compared phylogenetic trees. We analyze the properties of the MP metric and present computational experiments showing its potential applicability in tasks related to finding the HGT events.

Development of high integrity, maximum durability concrete structures for LLW disposal facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taylor, W.P.

1992-05-01

A number of disposal facilities for Low-Level Radioactive Wastes have been planned for the Savannah River Site. Design has been completed for disposal vaults for several waste classifications and construction is nearly complete or well underway on some facilities. Specific design criteria varies somewhat for each waste classification. All disposal units have been designed as below-grade concrete vaults, although the majority will be above ground for many years before being encapsulated with earth at final closure. Some classes of vaults have a minimum required service life of 100 years. All vaults utilize a unique blend of cement, blast furnace slagmore » and pozzolan. The design synthesizes the properties of the concrete mix with carefully planned design details and construction methodologies to (1) eliminate uncontrolled cracking; (2) minimize leakage potential; and (3) maximize durability. The first of these vaults will become operational in 1992. 9 refs.« less

Development of high integrity, maximum durability concrete structures for LLW disposal facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taylor, W.P.

1992-01-01

A number of disposal facilities for Low-Level Radioactive Wastes have been planned for the Savannah River Site. Design has been completed for disposal vaults for several waste classifications and construction is nearly complete or well underway on some facilities. Specific design criteria varies somewhat for each waste classification. All disposal units have been designed as below-grade concrete vaults, although the majority will be above ground for many years before being encapsulated with earth at final closure. Some classes of vaults have a minimum required service life of 100 years. All vaults utilize a unique blend of cement, blast furnace slagmore » and pozzolan. The design synthesizes the properties of the concrete mix with carefully planned design details and construction methodologies to (1) eliminate uncontrolled cracking; (2) minimize leakage potential; and (3) maximize durability. The first of these vaults will become operational in 1992. 9 refs.« less

47 CFR 87.89 - Minimum operator requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

....89 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES AVIATION SERVICES Operating Requirements and Procedures Radio Operator Requirements § 87.89 Minimum operator requirements. (a) A station operator must hold a commercial radio operator license or permit...

47 CFR 87.89 - Minimum operator requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

....89 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES AVIATION SERVICES Operating Requirements and Procedures Radio Operator Requirements § 87.89 Minimum operator requirements. (a) A station operator must hold a commercial radio operator license or permit...

47 CFR 87.89 - Minimum operator requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

....89 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES AVIATION SERVICES Operating Requirements and Procedures Radio Operator Requirements § 87.89 Minimum operator requirements. (a) A station operator must hold a commercial radio operator license or permit...

47 CFR 87.89 - Minimum operator requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

....89 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES AVIATION SERVICES Operating Requirements and Procedures Radio Operator Requirements § 87.89 Minimum operator requirements. (a) A station operator must hold a commercial radio operator license or permit...

47 CFR 87.89 - Minimum operator requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

....89 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES AVIATION SERVICES Operating Requirements and Procedures Radio Operator Requirements § 87.89 Minimum operator requirements. (a) A station operator must hold a commercial radio operator license or permit...

Minimum Competency Testing: Guidelines for Policymakers and Citizens.

ERIC Educational Resources Information Center

Gray, Dennis

Intended to help the laity find their way through the confusion and controversy surrounding minimum competency testing (MCT), this paper explains what MCT is, acknowledges its limitations, weighs the criticisms, and shows how MCT may be used constructively for the benefit of students and for the improvement of schools. Highlights from the paper…

25 CFR 170.506 - What are the minimum qualifications for certified bridge inspectors?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false What are the minimum qualifications for certified bridge inspectors? 170.506 Section 170.506 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER INDIAN RESERVATION ROADS PROGRAM Planning, Design, and Construction of Indian Reservation Roads...

29 CFR 1926.752 - Site layout, site-specific erection plan and construction sequence.

Code of Federal Regulations, 2011 CFR

2011-07-01

... standard test method of field-cured samples, either 75 percent of the intended minimum compressive design... the basis of an appropriate ASTM standard test method of field-cured samples, either 75 percent of the intended minimum compressive design strength or sufficient strength to support the loads imposed during...

29 CFR 1926.752 - Site layout, site-specific erection plan and construction sequence.

Code of Federal Regulations, 2013 CFR

2013-07-01

... standard test method of field-cured samples, either 75 percent of the intended minimum compressive design... the basis of an appropriate ASTM standard test method of field-cured samples, either 75 percent of the intended minimum compressive design strength or sufficient strength to support the loads imposed during...

29 CFR 1926.752 - Site layout, site-specific erection plan and construction sequence.

Code of Federal Regulations, 2012 CFR

2012-07-01

... standard test method of field-cured samples, either 75 percent of the intended minimum compressive design... the basis of an appropriate ASTM standard test method of field-cured samples, either 75 percent of the intended minimum compressive design strength or sufficient strength to support the loads imposed during...

29 CFR 1926.752 - Site layout, site-specific erection plan and construction sequence.

Code of Federal Regulations, 2010 CFR

2010-07-01

... standard test method of field-cured samples, either 75 percent of the intended minimum compressive design... the basis of an appropriate ASTM standard test method of field-cured samples, either 75 percent of the intended minimum compressive design strength or sufficient strength to support the loads imposed during...

29 CFR 1926.752 - Site layout, site-specific erection plan and construction sequence.

Code of Federal Regulations, 2014 CFR

2014-07-01

... standard test method of field-cured samples, either 75 percent of the intended minimum compressive design... the basis of an appropriate ASTM standard test method of field-cured samples, either 75 percent of the intended minimum compressive design strength or sufficient strength to support the loads imposed during...

Adverse Climatic Conditions and Impact on Construction Scheduling and Cost

DTIC Science & Technology

1988-01-01

ABBREVIATIONS ABS MAX MAX TEMP ...... Absolute maximum maximum temperature ABS MIN MIN TEMP ...... Absolute minimum minimum temperature BTU...o Degrees Farenheit MEAN MAX TEMP o.................... Mean maximum temperature MEAN MIN TEMP...temperatures available, a determination had to be made as to whether forecasts were based on absolute , mean, or statistically derived temperatures

40 CFR 600.010-08 - Vehicle test requirements and minimum data requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... data requirements. 600.010-08 Section 600.010-08 Protection of Environment ENVIRONMENTAL PROTECTION... requirements and minimum data requirements. (a) Unless otherwise exempted from specific emission compliance... applicable): (1) The manufacturer shall generate FTP fuel economy data by testing according to the applicable...

Solar power satellite—Life-cycle energy recovery considerations

NASA Astrophysics Data System (ADS)

Weingartner, S.; Blumenberg, J.

1995-05-01

The construction, in-orbit installation and maintenance of a solar power satellite (SPS) will demand large amounts of energy. As a minimum requirement for an energy effective power satellite it is asked that this amount of energy be recovered. The energy effectiveness in this sense resulting in a positive net energy balance is a prerequisite for a cost-effective power satellite. This paper concentrates on life-cycle energy recovery instead of monetary aspects. The trade-offs between various power generation systems (different types of solar cells, solar dynamic), various construction and installation strategies (using terrestrial or extra-terrestrial resources) and the expected/required lifetime of the SPS are reviewed. The presented work is based on a 2-year study performed at the Technical University of Munich. The study showed that the main energy which is needed to make a solar power satellite a reality is required for the production of the solar power plant components (up to 65%), especially for the solar cell production. Whereas transport into orbit accounts in the order of 20% and the receiving station on Earth (rectenna) requires in the order of 15% of the total energy investment. The energetic amortization time, i.e. the time the SPS has to be operational to give back the amount of energy which was needed for its production, installation and operation, is in the order of two years.

A conceptual framework and monitoring strategy for movement of saltwater in the coastal plain aquifer system of Virginia

USGS Publications Warehouse

Mcfarland, E. Randolph

2015-09-04

The saltwater-movement monitoring strategy is limited and constrained. Relative monitoring needs among groundwater-production wells, and construction of observation wells, depend on the accuracy of previously mapped groundwater chloride iso-concentration surfaces. Production wells in similar proximity to saltwater can differ in aquifer hydraulic conductivity, rates of withdrawal, and screened-interval lengths. Only production wells making withdrawals reported to the Virginia Department of Environmental Quality have been accounted for; undocumented production wells can result in spurious changes in groundwater chloride concentration. Upconing observation wells should be as close as possible to corresponding production wells, so long as production wells are not damaged by borehole deviation. Projected locations of some lateral-intrusion observation wells may be precluded and require adjustment. Depths of upconing and lateral-intrusion observation wells may also require adjustment to be within the same aquifer as their corresponding production wells. Existing unused wells can be adapted as observation wells if differences from specified locations and construction are kept to a minimum and are accounted for. Where multiple production wells are in proximity, a modified monitoring approach may be needed to determine their net effect on changes in chloride concentration, and may require more than one lateral-intrusion observation well depending on the vertical positions of production-well screened intervals.

"PowerUp"!: A Tool for Calculating Minimum Detectable Effect Sizes and Minimum Required Sample Sizes for Experimental and Quasi-Experimental Design Studies

ERIC Educational Resources Information Center

Dong, Nianbo; Maynard, Rebecca

2013-01-01

This paper and the accompanying tool are intended to complement existing supports for conducting power analysis tools by offering a tool based on the framework of Minimum Detectable Effect Sizes (MDES) formulae that can be used in determining sample size requirements and in estimating minimum detectable effect sizes for a range of individual- and…

40 CFR 600.010-08 - Vehicle test requirements and minimum data requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., US06, SC03 and Cold temperature FTP data from each subconfiguration included within the model type. (2... data requirements. 600.010-08 Section 600.010-08 Protection of Environment ENVIRONMENTAL PROTECTION... Provisions § 600.010-08 Vehicle test requirements and minimum data requirements. (a) Unless otherwise...

40 CFR 600.010-86 - Vehicle test requirements and minimum data requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... additional model types established under § 600.207(a)(2), data from each subconfiguration included within the... data requirements. 600.010-86 Section 600.010-86 Protection of Environment ENVIRONMENTAL PROTECTION... requirements and minimum data requirements. (a) For each certification vehicle defined in this part, and for...

29 CFR 4043.25 - Failure to make required minimum funding payment.

Code of Federal Regulations, 2013 CFR

2013-07-01

... TERMINATIONS REPORTABLE EVENTS AND CERTAIN OTHER NOTIFICATION REQUIREMENTS Post-Event Notice of Reportable Events § 4043.25 Failure to make required minimum funding payment. (a) Reportable event. A reportable event occurs when a required installment or a payment required under section 302 of ERISA or section 412...

29 CFR 4043.25 - Failure to make required minimum funding payment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... TERMINATIONS REPORTABLE EVENTS AND CERTAIN OTHER NOTIFICATION REQUIREMENTS Post-Event Notice of Reportable Events § 4043.25 Failure to make required minimum funding payment. (a) Reportable event. A reportable event occurs when a required installment or a payment required under section 302 of ERISA or section 412...

29 CFR 4043.25 - Failure to make required minimum funding payment.

Code of Federal Regulations, 2012 CFR

2012-07-01

... TERMINATIONS REPORTABLE EVENTS AND CERTAIN OTHER NOTIFICATION REQUIREMENTS Post-Event Notice of Reportable Events § 4043.25 Failure to make required minimum funding payment. (a) Reportable event. A reportable event occurs when a required installment or a payment required under section 302 of ERISA or section 412...

29 CFR 4043.25 - Failure to make required minimum funding payment.

Code of Federal Regulations, 2011 CFR

2011-07-01

... TERMINATIONS REPORTABLE EVENTS AND CERTAIN OTHER NOTIFICATION REQUIREMENTS Post-Event Notice of Reportable Events § 4043.25 Failure to make required minimum funding payment. (a) Reportable event. A reportable event occurs when a required installment or a payment required under section 302 of ERISA or section 412...

30 CFR 77.804 - High-voltage trailing cables; minimum design requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false High-voltage trailing cables; minimum design... OF UNDERGROUND COAL MINES Surface High-Voltage Distribution § 77.804 High-voltage trailing cables; minimum design requirements. (a) High-voltage trailing cables used in resistance grounded systems shall be...

30 CFR 75.1107-9 - Dry chemical devices; capacity; minimum requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Dry chemical devices; capacity; minimum... Dry chemical devices; capacity; minimum requirements. (a) Dry chemical fire extinguishing systems used...; (3) Hose and pipe shall be as short as possible; the distance between the chemical container and...

30 CFR 75.1107-9 - Dry chemical devices; capacity; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Dry chemical devices; capacity; minimum... Dry chemical devices; capacity; minimum requirements. (a) Dry chemical fire extinguishing systems used...; (3) Hose and pipe shall be as short as possible; the distance between the chemical container and...

27 CFR 19.184 - Scale tank minimum graduations.

Code of Federal Regulations, 2012 CFR

2012-04-01

... graduations. 19.184 Section 19.184 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... Requirements Tank Requirements § 19.184 Scale tank minimum graduations. (a) The beams or dials on scale tanks used for tax determination must have minimum graduations not greater than the following: Quantity to be...

27 CFR 19.184 - Scale tank minimum graduations.

Code of Federal Regulations, 2013 CFR

2013-04-01

... graduations. 19.184 Section 19.184 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... Requirements Tank Requirements § 19.184 Scale tank minimum graduations. (a) The beams or dials on scale tanks used for tax determination must have minimum graduations not greater than the following: Quantity to be...

27 CFR 19.184 - Scale tank minimum graduations.

Code of Federal Regulations, 2011 CFR

2011-04-01

... graduations. 19.184 Section 19.184 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... Requirements Tank Requirements § 19.184 Scale tank minimum graduations. (a) The beams or dials on scale tanks used for tax determination must have minimum graduations not greater than the following: Quantity to be...

27 CFR 19.184 - Scale tank minimum graduations.

Code of Federal Regulations, 2014 CFR

2014-04-01

... graduations. 19.184 Section 19.184 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... Requirements Tank Requirements § 19.184 Scale tank minimum graduations. (a) The beams or dials on scale tanks used for tax determination must have minimum graduations not greater than the following: Quantity to be...

30 CFR 77.804 - High-voltage trailing cables; minimum design requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false High-voltage trailing cables; minimum design... OF UNDERGROUND COAL MINES Surface High-Voltage Distribution § 77.804 High-voltage trailing cables; minimum design requirements. (a) High-voltage trailing cables used in resistance grounded systems shall be...

30 CFR 77.804 - High-voltage trailing cables; minimum design requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false High-voltage trailing cables; minimum design... OF UNDERGROUND COAL MINES Surface High-Voltage Distribution § 77.804 High-voltage trailing cables; minimum design requirements. (a) High-voltage trailing cables used in resistance grounded systems shall be...

30 CFR 77.804 - High-voltage trailing cables; minimum design requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false High-voltage trailing cables; minimum design... OF UNDERGROUND COAL MINES Surface High-Voltage Distribution § 77.804 High-voltage trailing cables; minimum design requirements. (a) High-voltage trailing cables used in resistance grounded systems shall be...

30 CFR 75.1107-9 - Dry chemical devices; capacity; minimum requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Dry chemical devices; capacity; minimum... Dry chemical devices; capacity; minimum requirements. (a) Dry chemical fire extinguishing systems used...; (3) Hose and pipe shall be as short as possible; the distance between the chemical container and...

30 CFR 75.1107-9 - Dry chemical devices; capacity; minimum requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Dry chemical devices; capacity; minimum... Dry chemical devices; capacity; minimum requirements. (a) Dry chemical fire extinguishing systems used...; (3) Hose and pipe shall be as short as possible; the distance between the chemical container and...

17 CFR 1.52 - Self-regulatory organization adoption and surveillance of minimum financial requirements.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 17 Commodity and Securities Exchanges 1 2013-04-01 2013-04-01 false Self-regulatory organization... Miscellaneous § 1.52 Self-regulatory organization adoption and surveillance of minimum financial requirements. (a) Each self-regulatory organization must adopt rules prescribing minimum financial and related...

30 CFR 77.1707 - First aid equipment; location; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false First aid equipment; location; minimum... OF UNDERGROUND COAL MINES Miscellaneous § 77.1707 First aid equipment; location; minimum requirements. (a) Each operator of a surface coal mine shall maintain a supply of the first aid equipment set forth...

10 CFR 440.16 - Minimum program requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 3 2014-01-01 2014-01-01 false Minimum program requirements. 440.16 Section 440.16 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION WEATHERIZATION ASSISTANCE FOR LOW-INCOME PERSONS § 440.16 Minimum...) Families with children; (4) High residential energy users; and (5) Households with a high energy burden. (c...

10 CFR 440.16 - Minimum program requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 3 2012-01-01 2012-01-01 false Minimum program requirements. 440.16 Section 440.16 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION WEATHERIZATION ASSISTANCE FOR LOW-INCOME PERSONS § 440.16 Minimum...) Families with children; (4) High residential energy users; and (5) Households with a high energy burden. (c...

10 CFR 440.16 - Minimum program requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 3 2013-01-01 2013-01-01 false Minimum program requirements. 440.16 Section 440.16 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION WEATHERIZATION ASSISTANCE FOR LOW-INCOME PERSONS § 440.16 Minimum...) Families with children; (4) High residential energy users; and (5) Households with a high energy burden. (c...

The existence and concentration of positive solutions for a nonlinear Schrödinger-Poisson system with critical growth

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Jianjun

2014-03-15

We consider the Schrödinger-Poisson system: −ε{sup 2}Δu + V(x)u + ϕ(x)u = f(u),−Δϕ = u{sup 2} in R{sup 3}, where the nonlinear term f is of critical growth. In this paper, we construct a solution (u{sub ε}, ϕ{sub ε}) of the above elliptic system, which concentrates at an isolated component of positive locally minimum points of V as ε → 0 under certain conditions on f. In particular, the monotonicity of (f(s))/(s{sup 3}) and the so-called Ambrosetti-Rabinowitz condition are not required.

Modelling and performance of Nb SIS mixers in the 1.3 mm and 0.8 mm bands

NASA Technical Reports Server (NTRS)

Karpov, A.; Carter, M.; Lazareff, B.; Billon-Pierron, D.; Gundlach, K. H.

1992-01-01

We describe the modeling and subsequent improvements of SIS waveguide mixers for the 200-270 and 330-370 GHz bands (Blundell, Carter, and Gundlach 1988, Carter et al 1991). These mixers are constructed for use in receivers on IRAM radiotelescopes on Pico Veleta (Spain, Sierra Nevada) and Plateau de Bure (French Alps), and must meet specific requirements. The standard reduced height waveguide structure with suspended stripline is first analyzed and a model is validated through comparison with scale model and working scale measurements. In the first step, the intrinsic limitations of the standard mixer structure are identified, and the parameters are optimized bearing in mind the radioastronomical applications. In the second step, inductive tuning of the junctions is introduced and optimized for minimum noise and maximum bandwidth. In the 1.3 mm band, a DSB receiver temperature of less than 110 K (minimum 80 K) is measured from 180 through 260 GHz. In the 0.8 mm band, a DSB receiver temperature of less than 250 K (minimum 175 K) is obtained between 325 and 355 GHz. All these results are obtained with room-temperature optics and a 4 GHz IF chain having a 500 MHz bandwidth and a noise temperature of 14 K.

The Application of materials attractiveness in a graded approach to nuclear materials security

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ebbinghaus, B.; Bathke, C.; Dalton, D.

2013-07-01

The threat from terrorist groups has recently received greater attention. In this paper, material quantity and material attractiveness are addressed through the lens of a minimum security strategy needed to prevent the construction of a nuclear explosive device (NED) by an adversary. Nuclear materials are placed into specific security categories (3 or 4 categories) , which define a number of security requirements to protect the material. Materials attractiveness can be divided into four attractiveness levels, High, Medium, Low, and Very Low that correspond to the utility of the material to the adversary and to a minimum security strategy that ismore » necessary to adequately protect the nuclear material. We propose a graded approach to materials attractiveness that recognizes for instance substantial differences in attractiveness between pure reactor-grade Pu oxide (High attractiveness) and fresh MOX fuel (Low attractiveness). In either case, an adversary's acquisition of a Category I quantity of plutonium would be a major incident, but the acquisition of Pu oxide by the adversary would be substantially worse than the acquisition of fresh MOX fuel because of the substantial differences in the time and complexity required of the adversary to process the material and fashion it into a NED.« less

33 CFR 67.05-20 - Minimum lighting requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... for Lights § 67.05-20 Minimum lighting requirements. The obstruction lighting requirements prescribed... application for authorization to establish more lights, or lights of greater intensity than required to be visible at the distances prescribed: Provided, That the prescribed characteristics of color and flash...

33 CFR 67.05-20 - Minimum lighting requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... for Lights § 67.05-20 Minimum lighting requirements. The obstruction lighting requirements prescribed... application for authorization to establish more lights, or lights of greater intensity than required to be visible at the distances prescribed: Provided, That the prescribed characteristics of color and flash...

33 CFR 67.05-20 - Minimum lighting requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... for Lights § 67.05-20 Minimum lighting requirements. The obstruction lighting requirements prescribed... application for authorization to establish more lights, or lights of greater intensity than required to be visible at the distances prescribed: Provided, That the prescribed characteristics of color and flash...

33 CFR 67.05-20 - Minimum lighting requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... for Lights § 67.05-20 Minimum lighting requirements. The obstruction lighting requirements prescribed... application for authorization to establish more lights, or lights of greater intensity than required to be visible at the distances prescribed: Provided, That the prescribed characteristics of color and flash...

33 CFR 67.05-20 - Minimum lighting requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... for Lights § 67.05-20 Minimum lighting requirements. The obstruction lighting requirements prescribed... application for authorization to establish more lights, or lights of greater intensity than required to be visible at the distances prescribed: Provided, That the prescribed characteristics of color and flash...

The Evolution of the Cup-Cage Technique for Major Acetabular Defects: Full and Half Cup-Cage Reconstruction.

PubMed

Sculco, Peter K; Ledford, Cameron K; Hanssen, Arlen D; Abdel, Matthew P; Lewallen, David G

2017-07-05

Complex acetabular reconstruction for major bone loss can require advanced methods such as the use of a cup-cage construct. The purpose of this study was to review outcomes after the initial development of the cup-cage technique and the subsequent evolution to the use of a half cup-cage construct. We performed a retrospective, single-center review of 57 patients treated with cup-cage reconstruction for major acetabular bone loss. All patients had major acetabular defects graded as Paprosky Type 2B through 3B, with 34 (60%) having an associated pelvic discontinuity. Thirty patients received a full cup-cage construct and 27, a half cup-cage construct. The mean follow-up was 5 years. Both the full and half cup-cage cohorts demonstrated significantly improved Harris hip score (HHS) values, from 36 to 72 at a minimum of 2 years of follow-up (p < 0.05). Early construct migration occurred in 4 patients, with stabilization prior to 2-year follow-up in all but 1 patient. Incomplete, zone-3, nonprogressive acetabular radiolucencies were observed in 2 (7%) of the full cup-cage constructs and 6 (22%) of the half cup-cage constructs. One patient with a full cup-cage construct underwent re-revision of the acetabular component for progressive migration and aseptic loosening. Short-term survivorship free from re-revision for any cause or reoperation was 89% (83% and 96% for full and half cup-cage cohorts, respectively). Both full and half cup-cage constructs demonstrated successful clinical outcomes and survivorship in the treatment of major acetabular defects and pelvic discontinuity. Each method is utilized on the basis of individual intraoperative findings, including the extent and pattern of bone loss, the quality and location of host bone remaining after preparation, and the presence of pelvic discontinuity. Longer-term follow-up is required to understand the durability of these constructs in treating major acetabular defects and pelvic discontinuity. Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

Optimization of Cost of Building with Concrete Slabs Based on the Maturity Method

NASA Astrophysics Data System (ADS)

Skibicki, Szymon

2017-10-01

The maturity method is a well-known technique for determination of mechanical properties of the concrete (e.g. compressive strength) based on the development of temperature during hardening. The compressive strength of concrete can be used to determine necessary striking time of the formwork. Use of this method for this purpose is economically effective and provides necessary safety measures. This method is used in many construction sites. Time of formwork striking depends on many factors e. g. class of concrete, grade of cement, type of cement, temperature, size of the element and air humidity. The existing technical Standards and scientific research on the striking of formwork present different estimated for the striking time. Striking time for the main structural elements ranges from 14 to 21 days. For structura elements such as slabs or beams with a span of more than 6 m need to reach the minimum of 70-85% of their designed strength to remove the formwork depend on the Standards. During the construction of the buildings in summer concrete acquires the required strength for striking of the formwork faster due to the higher ambient temperature. Knowing the maturity method, we are able to estimate the compressive strength of concrete. If concrete have the required strength, the striking time can be shortened. This allows to reduce the overall costs of construction. The more concrete works are done during the construction phase the bigger the generated savings. In this article formwork striking time for concrete slabs in building based on maturity method was determined. The structure was subjected to 10 different simulated weather conditions typical for the Central and Western Europe that varied by localization of the construction. Based on simulated weather conditions the temperature in structural elements was established. The results allowed to determine the formwork striking time using the maturity method. Presented analysis shows that use of the maturity method on construction site can result in lower overall costs due to shorter time of constructing.

40 CFR 35.936 - Procurement.

Code of Federal Regulations, 2010 CFR

2010-07-01

... ASSISTANCE Grants for Construction of Treatment Works-Clean Water Act § 35.936 Procurement. (a) Sections 35.936 through 35.939 set forth policies and minimum standards for procurement of architectural or... under all steps of grants for construction of treatment works. Acquisition of real property shall be...

Reading Skill and the Minimum Distance Principle: A Comparison of Sentence Comprehension in Context and in Isolation.

ERIC Educational Resources Information Center

Goldman, Susan R.

The comprehension of the Minimum Distance Principle was examined in three experiments, using the "tell/promise" sentence construction. Experiment one compared the listening and reading comprehension of singly presented sentences, e.g. "John tells Bill to bake the cake" and "John promises Bill to bake the cake." The…

Scientific Terminology and Minimum Terms in Speech Communication: Some Philosophical Ramblings.

ERIC Educational Resources Information Center

Krivonos, Paul D.; Sussman, Lyle.

Philosophers of science have emphasized the need for primitive terms, or "givens," in the construction of theory for any discipline. While there are inherent dangers regarding the use of primitive terms, they can have great value in serving as the basis for minimum terms, which are primitive terms unique to a discipline. (Borrowed terms are those…

40 CFR 600.010-86 - Vehicle test requirements and minimum data requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... base level, and (iii) For additional model types established under § 600.207(a)(2), data from each... data requirements. 600.010-86 Section 600.010-86 Protection of Environment ENVIRONMENTAL PROTECTION... Provisions § 600.010-86 Vehicle test requirements and minimum data requirements. (a) For each certification...

17 CFR 31.7 - Maintenance of minimum financial, cover and segregation requirements by leverage transaction...

Code of Federal Regulations, 2010 CFR

2010-04-01

... financial, cover and segregation requirements by leverage transaction merchants. 31.7 Section 31.7 Commodity... of minimum financial, cover and segregation requirements by leverage transaction merchants. (a) Each... required by § 31.8, or that the amount of leverage customer funds in segregation is less than is required...

17 CFR 31.7 - Maintenance of minimum financial, cover and segregation requirements by leverage transaction...

Code of Federal Regulations, 2011 CFR

2011-04-01

... financial, cover and segregation requirements by leverage transaction merchants. 31.7 Section 31.7 Commodity... of minimum financial, cover and segregation requirements by leverage transaction merchants. (a) Each... required by § 31.8, or that the amount of leverage customer funds in segregation is less than is required...

25 CFR 1000.396 - Does a Tribe/Consortium have additional ongoing requirements to maintain minimum standards for...

Code of Federal Regulations, 2010 CFR

2010-04-01

... requirements to maintain minimum standards for Tribe/Consortium management systems? 1000.396 Section 1000.396... AGREEMENTS UNDER THE TRIBAL SELF-GOVERNMENT ACT AMENDMENTS TO THE INDIAN SELF-DETERMINATION AND EDUCATION ACT... minimum standards for Tribe/Consortium management systems? Yes, the Tribe/Consortium must maintain...

25 CFR 36.100 - Are there minimum requirements for student attendance checks?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Are there minimum requirements for student attendance checks? 36.100 Section 36.100 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY...

30 CFR 77.805 - Cable couplers and connection boxes; minimum design requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Cable couplers and connection boxes; minimum... connection boxes; minimum design requirements. (a)(1) Couplers that are used in medium- or high-voltage power... materials other than metal. (2) Cable couplers shall be adequate for the intended current and voltage. (3...

30 CFR 77.805 - Cable couplers and connection boxes; minimum design requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Cable couplers and connection boxes; minimum... connection boxes; minimum design requirements. (a)(1) Couplers that are used in medium- or high-voltage power... materials other than metal. (2) Cable couplers shall be adequate for the intended current and voltage. (3...

30 CFR 77.805 - Cable couplers and connection boxes; minimum design requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Cable couplers and connection boxes; minimum... WORK AREAS OF UNDERGROUND COAL MINES Surface High-Voltage Distribution § 77.805 Cable couplers and connection boxes; minimum design requirements. (a)(1) Couplers that are used in medium- or high-voltage power...

30 CFR 77.805 - Cable couplers and connection boxes; minimum design requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Cable couplers and connection boxes; minimum... WORK AREAS OF UNDERGROUND COAL MINES Surface High-Voltage Distribution § 77.805 Cable couplers and connection boxes; minimum design requirements. (a)(1) Couplers that are used in medium- or high-voltage power...

30 CFR 77.805 - Cable couplers and connection boxes; minimum design requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Cable couplers and connection boxes; minimum... WORK AREAS OF UNDERGROUND COAL MINES Surface High-Voltage Distribution § 77.805 Cable couplers and connection boxes; minimum design requirements. (a)(1) Couplers that are used in medium- or high-voltage power...

25 CFR 36.100 - Are there minimum requirements for student attendance checks?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 1 2012-04-01 2011-04-01 true Are there minimum requirements for student attendance checks? 36.100 Section 36.100 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY...

25 CFR 36.100 - Are there minimum requirements for student attendance checks?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 1 2011-04-01 2011-04-01 false Are there minimum requirements for student attendance checks? 36.100 Section 36.100 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY...

25 CFR 36.100 - Are there minimum requirements for student attendance checks?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 1 2013-04-01 2013-04-01 false Are there minimum requirements for student attendance checks? 36.100 Section 36.100 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY...

25 CFR 36.100 - Are there minimum requirements for student attendance checks?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 1 2014-04-01 2014-04-01 false Are there minimum requirements for student attendance checks? 36.100 Section 36.100 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY...

75 FR 62345 - Minimum Balance Requirement and Automatic Replenishment Option for Deposit Account Holders

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-08

... LIBRARY OF CONGRESS Copyright Office 37 CFR Part 201 [Docket No. RM 2009-4] Minimum Balance... transactions per year; require deposit account holders to maintain a minimum balance in that account; mandate... against the balance instead of sending separate payments with applications and other requests for services...

30 CFR 75.1713-7 - First-aid equipment; location; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false First-aid equipment; location; minimum... § 75.1713-7 First-aid equipment; location; minimum requirements. (a) Each operator of an underground coal mine shall maintain a supply of the first-aid equipment set forth in paragraph (b) of this § 75...

30 CFR 75.1713-6 - First-aid training program; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false First-aid training program; minimum... § 75.1713-6 First-aid training program; minimum requirements. (a) All first-aid training programs... course of instruction similar to that outlined in “First Aid, A Bureau of Mines Instruction Manual.” (b...

29 CFR 780.313 - Piece rate basis.

Code of Federal Regulations, 2010 CFR

2010-07-01

... That Is Exempted From the Minimum Wage and Overtime Pay Requirements Under Section 13(a)(6) Statutory... to the minimum wage provisions of the Act does not meet all the requirements set forth in this section he must be paid at least the minimum wage for each hour worked in a particular workweek...

42 CFR 84.157 - Airflow resistance test; Type C supplied-air respirator, pressure-demand class; minimum...

Code of Federal Regulations, 2012 CFR

2012-10-01

... test; Type C supplied-air respirator, pressure-demand class; minimum requirements. (a) The static... 42 Public Health 1 2012-10-01 2012-10-01 false Airflow resistance test; Type C supplied-air respirator, pressure-demand class; minimum requirements. 84.157 Section 84.157 Public Health PUBLIC HEALTH...

42 CFR 84.157 - Airflow resistance test; Type C supplied-air respirator, pressure-demand class; minimum...

Code of Federal Regulations, 2013 CFR

2013-10-01

... test; Type C supplied-air respirator, pressure-demand class; minimum requirements. (a) The static... 42 Public Health 1 2013-10-01 2013-10-01 false Airflow resistance test; Type C supplied-air respirator, pressure-demand class; minimum requirements. 84.157 Section 84.157 Public Health PUBLIC HEALTH...

42 CFR 84.157 - Airflow resistance test; Type C supplied-air respirator, pressure-demand class; minimum...

Code of Federal Regulations, 2014 CFR

2014-10-01

... test; Type C supplied-air respirator, pressure-demand class; minimum requirements. (a) The static... 42 Public Health 1 2014-10-01 2014-10-01 false Airflow resistance test; Type C supplied-air respirator, pressure-demand class; minimum requirements. 84.157 Section 84.157 Public Health PUBLIC HEALTH...

42 CFR 84.157 - Airflow resistance test; Type C supplied-air respirator, pressure-demand class; minimum...

Code of Federal Regulations, 2010 CFR

2010-10-01

... respirator, pressure-demand class; minimum requirements. 84.157 Section 84.157 Public Health PUBLIC HEALTH... test; Type C supplied-air respirator, pressure-demand class; minimum requirements. (a) The static... the facepiece shall not fall below atmospheric at inhalation airflows less than 115 liters (4 cubic...

42 CFR 84.157 - Airflow resistance test; Type C supplied-air respirator, pressure-demand class; minimum...

Code of Federal Regulations, 2011 CFR

2011-10-01

... respirator, pressure-demand class; minimum requirements. 84.157 Section 84.157 Public Health PUBLIC HEALTH... test; Type C supplied-air respirator, pressure-demand class; minimum requirements. (a) The static... the facepiece shall not fall below atmospheric at inhalation airflows less than 115 liters (4 cubic...

14 CFR 171.257 - Minimum requirements for approval.

Code of Federal Regulations, 2010 CFR

2010-01-01

... System (ISMLS) § 171.257 Minimum requirements for approval. (a) The following are the minimum... operate and maintain the ISMLS facility in accordance with § 171.273. (4) The owner must agree to furnish periodic reports as set forth in § 171.275 and agree to allow the FAA to inspect the facility and its...

40 CFR 600.010 - Vehicle test requirements and minimum data requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 31 2012-07-01 2012-07-01 false Vehicle test requirements and minimum data requirements. 600.010 Section 600.010 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND GREENHOUSE GAS EXHAUST EMISSIONS OF MOTOR VEHICLES General...

40 CFR 600.010 - Vehicle test requirements and minimum data requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 31 2013-07-01 2013-07-01 false Vehicle test requirements and minimum data requirements. 600.010 Section 600.010 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND GREENHOUSE GAS EXHAUST EMISSIONS OF MOTOR VEHICLES General...

40 CFR 600.010 - Vehicle test requirements and minimum data requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 30 2014-07-01 2014-07-01 false Vehicle test requirements and minimum data requirements. 600.010 Section 600.010 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND GREENHOUSE GAS EXHAUST EMISSIONS OF MOTOR VEHICLES General...

The Persian Version of the "Life Satisfaction Scale": Construct Validity and Test-Re-Test Reliability among Iranian Older Adults.

PubMed

Moghadam, Manije; Salavati, Mahyar; Sahaf, Robab; Rassouli, Maryam; Moghadam, Mojgan; Kamrani, Ahmad Ali Akbari

2018-03-01

After forward-backward translation, the LSS was administered to 334 Persian speaking, cognitively healthy elderly aged 60 years and over recruited through convenience sampling. To analyze the validity of the model's constructs and the relationships between the constructs, a confirmatory factor analysis followed by PLS analysis was performed. The Construct validity was further investigated by calculating the correlations between the LSS and the "Short Form Health Survey" (SF-36) subscales measuring similar and dissimilar constructs. The LSS was re-administered to 50 participants a month later to assess the reliability. For the eight-factor model of the life satisfaction construct, adequate goodness of fit between the hypothesized model and the model derived from the sample data was attained (positive and statistically significant beta coefficients, good R-squares and acceptable GoF). Construct validity was supported by convergent and discriminant validity, and correlations between the LSS and SF-36 subscales. Minimum Intraclass Correlation Coefficient level of 0.60 was exceeded by all subscales. Minimum level of reliability indices (Cronbach's α, composite reliability and indicator reliability) was exceeded by all subscales. The Persian-version of the Life Satisfaction Scale is a reliable and valid instrument, with psychometric properties which are consistent with the original version.

78 FR 2868 - Draft Environmental Assessment for Rulemaking To Establish Minimum Sound Requirements for Hybrid...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-14

... require hybrid and electric passenger cars, light trucks, medium and heavy duty trucks and buses, low... Sound Requirements for Hybrid and Electric Vehicles AGENCY: National Highway Traffic Safety... minimum sound requirements for hybrid and electric vehicles. DATES: Comments must be received on or before...

The minimal amount of starting DNA for Agilent’s hybrid capture-based targeted massively parallel sequencing

PubMed Central

Chung, Jongsuk; Son, Dae-Soon; Jeon, Hyo-Jeong; Kim, Kyoung-Mee; Park, Gahee; Ryu, Gyu Ha; Park, Woong-Yang; Park, Donghyun

2016-01-01

Targeted capture massively parallel sequencing is increasingly being used in clinical settings, and as costs continue to decline, use of this technology may become routine in health care. However, a limited amount of tissue has often been a challenge in meeting quality requirements. To offer a practical guideline for the minimum amount of input DNA for targeted sequencing, we optimized and evaluated the performance of targeted sequencing depending on the input DNA amount. First, using various amounts of input DNA, we compared commercially available library construction kits and selected Agilent’s SureSelect-XT and KAPA Biosystems’ Hyper Prep kits as the kits most compatible with targeted deep sequencing using Agilent’s SureSelect custom capture. Then, we optimized the adapter ligation conditions of the Hyper Prep kit to improve library construction efficiency and adapted multiplexed hybrid selection to reduce the cost of sequencing. In this study, we systematically evaluated the performance of the optimized protocol depending on the amount of input DNA, ranging from 6.25 to 200 ng, suggesting the minimal input DNA amounts based on coverage depths required for specific applications. PMID:27220682

An Analysis of Minimum System Requirements to Support Computerized Adaptive Testing.

DTIC Science & Technology

1986-09-01

adaptive test ( CAT ); adaptive test ing A;4SRAC:’ (Continue on reverie of necessary and ident4f by block number) % This pape-r discusses the minimum system...requirements needed to develop a computerized adaptive test ( CAT ). It lists some of the benefits of adaptive testing, establishes a set of...discusses the minimum system requirements needed to develop a computerized adaptive test ( CAT ). It lists some of the benefits of adaptive testing

Estimation of minimum ventilation requirement of dairy cattle barns for different outdoor temperature and its affects on indoor temperature: Bursa case.

PubMed

Yaslioglu, Erkan; Simsek, Ercan; Kilic, Ilker

2007-04-15

In the study, 10 different dairy cattle barns with natural ventilation system were investigated in terms of structural aspects. VENTGRAPH software package was used to estimate minimum ventilation requirements for three different outdoor design temperatures (-3, 0 and 1.7 degrees C). Variation in indoor temperatures was also determined according to the above-mentioned conditions. In the investigated dairy cattle barns, on condition that minimum ventilation requirement to be achieved for -3, 0 and 1.7 degrees C outdoor design temperature and 70, 80% Indoor Relative Humidity (IRH), estimated indoor temperature were ranged from 2.2 to 12.2 degrees C for 70% IRH, 4.3 to 15.0 degrees C for 80% IRH. Barn type, outdoor design temperature and indoor relative humidity significantly (p < 0.01) affect the indoor temperature. The highest ventilation requirement was calculated for straw yard (13879 m3 h(-1)) while the lowest was estimated for tie-stall (6169.20 m3 h(-1)). Estimated minimum ventilation requirements per animal were significantly (p < 0.01) different according to the barn types. Effect of outdoor esign temperatures on minimum ventilation requirements and minimum ventilation requirements per animal was found to be significant (p < 0.05, p < 0.01). Estimated indoor temperatures were in thermoneutral zone (-2 to 20 degrees C). Therefore, one can be said that use of naturally ventilated cold dairy barns in the region will not lead to problems associated with animal comfort in winter.

Commentary: legal minimum tread depth for passenger car tires in the U.S.A.--a survey.

PubMed

Blythe, William; Seguin, Debra E

2006-06-01

Available tire traction is a significant highway safety issue, particularly on wet roads. Tire-roadway friction on dry, clean roads is essentially independent of tread depth, and depends primarily on roadway surface texture. However, tire-wet-roadway friction, both for longitudinal braking and lateral cornering forces, depends on several variables, most importantly on water depth, speed and tire tread depth, and the roadway surface texture. The car owner-operator has control over speed and tire condition, but not on water depth or road surface texture. Minimum tire tread depth is legislated throughout most of the United States and Europe. Speed reduction for wet road conditions is not.A survey of state requirements for legal minimum tread depth for passenger vehicle tires in the United States is presented. Most states require a minimum of 2/32 of an inch (approximately 1.6 mm) of tread, but two require less, some have no requirements, and some defer to the federal criterion for commercial vehicle safety inspections. The requirement of 2/32 of an inch is consistent with the height of the tread-wear bars built in to passenger car tires sold in the United States, but the rationale for that requirement, or other existing requirements, is not clear. Recent research indicates that a minimum tread depth of 2/32 of an inch does not prevent significant loss of friction at highway speeds, even for minimally wet roadways. The research suggests that tires with less than 4/32 of an inch tread depth may lose approximately 50 percent of available friction in those circumstances, even before hydroplaning occurs. It is concluded that the present requirements for minimum passenger car tire tread depth are not based upon rational safety considerations, and that an increase in the minimum tread depth requirements would have a beneficial effect on highway safety.

77 FR 33607 - Horse Protection Act; Requiring Horse Industry Organizations To Assess and Enforce Minimum...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-07

... context of the proposed rule's minimum penalty requirements. Two commenters stated that the law is clear... appeal process without being able to appeal the decisions to the Secretary or a court of law. As... court of law, which is why, the commenters stated, the USDA has proposed the minimum penalties to be...

75 FR 18256 - Petition for Exemption; Summary of Petition Received

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-09

... an exemption from the specific dimensions of the passenger entry door of the Hawker Beechcraft Model 390-2. The door has basic dimensions greater than the minimum required by Sec. 23.783(f)(1). The total... than the minimum area required by Sec. 23.783(f)(1); however, the minimum width dimension cannot be met...

30 CFR 75.1103-3 - Automatic fire sensor and warning device systems; minimum requirements; general.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Automatic fire sensor and warning device systems; minimum requirements; general. 75.1103-3 Section 75.1103-3 Mineral Resources MINE SAFETY AND...-UNDERGROUND COAL MINES Fire Protection § 75.1103-3 Automatic fire sensor and warning device systems; minimum...

34 CFR 99.22 - What minimum requirements exist for the conduct of a hearing?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 1 2010-07-01 2010-07-01 false What minimum requirements exist for the conduct of a hearing? 99.22 Section 99.22 Education Office of the Secretary, Department of Education FAMILY EDUCATIONAL RIGHTS AND PRIVACY What Are the Procedures for Amending Education Records? § 99.22 What minimum...

42 CFR 84.174 - Respirator containers; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Air-Purifying Particulate Respirators § 84.174 Respirator containers; minimum requirements. (a) Except... contamination of respirators which are not removed, and to prevent damage to respirators during transit. ...

40 CFR 60.3041 - What is the minimum amount of monitoring data I must collect with my continuous emission...

Code of Federal Regulations, 2014 CFR

2014-07-01

... and Compliance Times for Other Solid Waste Incineration Units That Commenced Construction On or Before.... An operating day is any day the unit combusts any municipal or institutional solid waste. (d) If you... malfunction or when repairs, calibration checks, or zero and span checks keep you from collecting the minimum...

40 CFR 60.3041 - What is the minimum amount of monitoring data I must collect with my continuous emission...

Code of Federal Regulations, 2012 CFR

2012-07-01

... and Compliance Times for Other Solid Waste Incineration Units That Commenced Construction On or Before.... An operating day is any day the unit combusts any municipal or institutional solid waste. (d) If you... malfunction or when repairs, calibration checks, or zero and span checks keep you from collecting the minimum...

40 CFR 60.3041 - What is the minimum amount of monitoring data I must collect with my continuous emission...

Code of Federal Regulations, 2013 CFR

2013-07-01

... and Compliance Times for Other Solid Waste Incineration Units That Commenced Construction On or Before.... An operating day is any day the unit combusts any municipal or institutional solid waste. (d) If you... malfunction or when repairs, calibration checks, or zero and span checks keep you from collecting the minimum...

40 CFR Table 3 to Subpart Ec of... - Operating Parameters To Be Monitored and Minimum Measurement and Recording Frequencies

Code of Federal Regulations, 2010 CFR

2010-07-01

... Which Construction is Commenced After June 20, 1996 Pt. 60, Subpt. Ec, Table 3 Table 3 to Subpart Ec of... Operating parameters to be monitored Minimum frequency Data measurement Data recording Control system Dry scrubber followed by fabric filter Wet scrubber Dry scrubber followed by fabric filter and wet scrubber...

Treatment of District Energy CHP Outputs in LEED® for Building Design and Construction: New Construction and Major Renovations

EPA Pesticide Factsheets

This fact sheet summarizes how buildings connected to a CHP- equipped district energy system can earn more LEED® points than they could otherwise earn. It presents guidance for meeting the LEED® Minimum Energy Performance prerequisite and calculating point

48 CFR 652.242-72 - Shipping Instructions.

Code of Federal Regulations, 2012 CFR

2012-10-01

...) Each packing box shall be of solid construction in accordance with best commercial practices and.../3 of the width of the piece of lumber. Box shall be constructed with three-way corners and diagonal... the following table, dependent upon the weight of the contents: Weight of box and contents Minimum...

48 CFR 652.242-72 - Shipping Instructions.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) Each packing box shall be of solid construction in accordance with best commercial practices and.../3 of the width of the piece of lumber. Box shall be constructed with three-way corners and diagonal... the following table, dependent upon the weight of the contents: Weight of box and contents Minimum...

48 CFR 652.242-72 - Shipping Instructions.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) Each packing box shall be of solid construction in accordance with best commercial practices and.../3 of the width of the piece of lumber. Box shall be constructed with three-way corners and diagonal... the following table, dependent upon the weight of the contents: Weight of box and contents Minimum...

Developmental Differences in Motor Task Integration: A Test of Pascual-Leone's Theory of Constructive Operators.

ERIC Educational Resources Information Center

Todor, John I.

1979-01-01

Assesses the ability of Pascual-Leone's Theory of Constructive Operators to predict the minimum age or maturational level at which integration of a motor task could be achieved. Subjects were 114 elementary school children ranging in age from 5 to 12. (Author/MP)

30 CFR 715.18 - Dams constructed of or impounding waste material.

Code of Federal Regulations, 2012 CFR

2012-07-01

... overtopping by wind and wave action. (iii) Dams shall have minimum safety factors as follows: Case Loading... abutments shall be controlled to prevent excessive uplift pressures, internal erosion, sloughing, removal of... before construction begins. (8) All dams shall be removed and the disturbed areas regraded, revegetated...

30 CFR 715.18 - Dams constructed of or impounding waste material.

Code of Federal Regulations, 2014 CFR

2014-07-01

... overtopping by wind and wave action. (iii) Dams shall have minimum safety factors as follows: Case Loading... abutments shall be controlled to prevent excessive uplift pressures, internal erosion, sloughing, removal of... before construction begins. (8) All dams shall be removed and the disturbed areas regraded, revegetated...

30 CFR 715.18 - Dams constructed of or impounding waste material.

Code of Federal Regulations, 2013 CFR

2013-07-01

... overtopping by wind and wave action. (iii) Dams shall have minimum safety factors as follows: Case Loading... abutments shall be controlled to prevent excessive uplift pressures, internal erosion, sloughing, removal of... before construction begins. (8) All dams shall be removed and the disturbed areas regraded, revegetated...

30 CFR 933.784 - Underground mining permit applications-minimum requirements for reclamation and operation plan.

Code of Federal Regulations, 2010 CFR

2010-07-01

... requirements for reclamation and operation plan. 933.784 Section 933.784 Mineral Resources OFFICE OF SURFACE... requirements for reclamation and operation plan. Part 784 of this chapter, Underground Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes...

30 CFR 939.784 - Underground mining permit applications-minimum requirements for reclamation and operation plan.

Code of Federal Regulations, 2010 CFR

2010-07-01

... requirements for reclamation and operation plan. 939.784 Section 939.784 Mineral Resources OFFICE OF SURFACE... requirements for reclamation and operation plan. Part 784 of this chapter, Underground Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes...

30 CFR 941.784 - Underground mining permit applications-minimum requirements for reclamation and operation plan.

Code of Federal Regulations, 2010 CFR

2010-07-01

... requirements for reclamation and operation plan. 941.784 Section 941.784 Mineral Resources OFFICE OF SURFACE... requirements for reclamation and operation plan. Part 784 of this chapter, Underground Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes...

30 CFR 921.784 - Underground mining permit applications-minimum requirements for reclamation and operation plan.

Code of Federal Regulations, 2010 CFR

2010-07-01

... requirements for reclamation and operation plan. 921.784 Section 921.784 Mineral Resources OFFICE OF SURFACE... requirements for reclamation and operation plan. Part 784 of this chapter, Underground Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes...

Effects of cryptic mortality and the hidden costs of using length limits in fishery management

USGS Publications Warehouse

Coggins, L.G.; Catalano, M.J.; Allen, M.S.; Pine, William E.; Walters, C.J.

2007-01-01

Fishery collapses cause substantial economic and ecological harm, but common management actions often fail to prevent overfishing. Minimum length limits are perhaps the most common fishing regulation used in both commercial and recreational fisheries, but their conservation benefits can be influenced by discard mortality of fish caught and released below the legal length. We constructed a computer model to evaluate how discard mortality could influence the conservation utility of minimum length regulations. We evaluated policy performance across two disparate fish life-history types: short-lived high-productivity (SLHP) and long-lived low-productivity (LLLP) species. For the life-history types, fishing mortality rates and minimum length limits that we examined, length limits alone generally failed to achieve sustainability when discard mortality rate exceeded about 0.2 for SLHP species and 0.05 for LLLP species. At these levels of discard mortality, reductions in overall fishing mortality (e.g. lower fishing effort) were required to prevent recruitment overfishing if fishing mortality was high. Similarly, relatively low discard mortality rates (>0.05) rendered maximum yield unobtainable and caused a substantial shift in the shape of the yield response surfaces. An analysis of fishery efficiency showed that length limits caused the simulated fisheries to be much less efficient, potentially exposing the target species and ecosystem to increased negative effects of the fishing process. Our findings suggest that for overexploited fisheries with moderate-to-high discard mortality rates, reductions in fishing mortality will be required to meet management goals. Resource managers should carefully consider impacts of cryptic mortality sources (e.g. discard mortality) on fishery sustainability, especially in recreational fisheries where release rates are high and effort is increasing in many areas of the world. ?? 2007 Blackwell Publishing Ltd.

7 CFR 1788.11 - Minimum insurance requirements for contractors, engineers, and architects.

Code of Federal Regulations, 2014 CFR

2014-01-01

... REQUIREMENTS FOR ELECTRIC AND TELECOMMUNICATIONS BORROWERS Insurance for Contractors, Engineers, and Architects, Electric Borrowers § 1788.11 Minimum insurance requirements for contractors, engineers, and architects. (a..., engineers, and architects. 1788.11 Section 1788.11 Agriculture Regulations of the Department of Agriculture...

7 CFR 1788.11 - Minimum insurance requirements for contractors, engineers, and architects.

Code of Federal Regulations, 2010 CFR

2010-01-01

... REQUIREMENTS FOR ELECTRIC AND TELECOMMUNICATIONS BORROWERS Insurance for Contractors, Engineers, and Architects, Electric Borrowers § 1788.11 Minimum insurance requirements for contractors, engineers, and architects. (a..., engineers, and architects. 1788.11 Section 1788.11 Agriculture Regulations of the Department of Agriculture...

7 CFR 1788.11 - Minimum insurance requirements for contractors, engineers, and architects.

Code of Federal Regulations, 2012 CFR

2012-01-01

... REQUIREMENTS FOR ELECTRIC AND TELECOMMUNICATIONS BORROWERS Insurance for Contractors, Engineers, and Architects, Electric Borrowers § 1788.11 Minimum insurance requirements for contractors, engineers, and architects. (a..., engineers, and architects. 1788.11 Section 1788.11 Agriculture Regulations of the Department of Agriculture...

7 CFR 1788.11 - Minimum insurance requirements for contractors, engineers, and architects.

Code of Federal Regulations, 2013 CFR

2013-01-01

... REQUIREMENTS FOR ELECTRIC AND TELECOMMUNICATIONS BORROWERS Insurance for Contractors, Engineers, and Architects, Electric Borrowers § 1788.11 Minimum insurance requirements for contractors, engineers, and architects. (a..., engineers, and architects. 1788.11 Section 1788.11 Agriculture Regulations of the Department of Agriculture...

7 CFR 1788.11 - Minimum insurance requirements for contractors, engineers, and architects.

Code of Federal Regulations, 2011 CFR

2011-01-01

... REQUIREMENTS FOR ELECTRIC AND TELECOMMUNICATIONS BORROWERS Insurance for Contractors, Engineers, and Architects, Electric Borrowers § 1788.11 Minimum insurance requirements for contractors, engineers, and architects. (a..., engineers, and architects. 1788.11 Section 1788.11 Agriculture Regulations of the Department of Agriculture...

Query construction, entropy, and generalization in neural-network models

NASA Astrophysics Data System (ADS)

Sollich, Peter

1994-05-01

We study query construction algorithms, which aim at improving the generalization ability of systems that learn from examples by choosing optimal, nonredundant training sets. We set up a general probabilistic framework for deriving such algorithms from the requirement of optimizing a suitable objective function; specifically, we consider the objective functions entropy (or information gain) and generalization error. For two learning scenarios, the high-low game and the linear perceptron, we evaluate the generalization performance obtained by applying the corresponding query construction algorithms and compare it to training on random examples. We find qualitative differences between the two scenarios due to the different structure of the underlying rules (nonlinear and ``noninvertible'' versus linear); in particular, for the linear perceptron, random examples lead to the same generalization ability as a sequence of queries in the limit of an infinite number of examples. We also investigate learning algorithms which are ill matched to the learning environment and find that, in this case, minimum entropy queries can in fact yield a lower generalization ability than random examples. Finally, we study the efficiency of single queries and its dependence on the learning history, i.e., on whether the previous training examples were generated randomly or by querying, and the difference between globally and locally optimal query construction.

14 CFR 25.149 - Minimum control speed.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Minimum control speed. 25.149 Section 25... Minimum control speed. (a) In establishing the minimum control speeds required by this section, the method... prevent a heading change of more than 20 degrees. (e) VMCG, the minimum control speed on the ground, is...

14 CFR 25.149 - Minimum control speed.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Minimum control speed. 25.149 Section 25... Minimum control speed. (a) In establishing the minimum control speeds required by this section, the method... prevent a heading change of more than 20 degrees. (e) VMCG, the minimum control speed on the ground, is...

12 CFR 324.10 - Minimum capital requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 5 2014-01-01 2014-01-01 false Minimum capital requirements. 324.10 Section 324.10 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND STATEMENTS OF GENERAL POLICY CAPITAL ADEQUACY OF FDIC-SUPERVISED INSTITUTIONS Capital Ratio Requirements and Buffers § 324.10...

7 CFR 35.11 - Minimum requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... species table grapes unless such grapes meet the following quality and container marking requirements..., Europe, Greenland, Canada, or Mexico, shall meet each applicable minimum requirement of the U.S. No. 1... 5 pounds or less in master containers, to any destination other than in Canada or Mexico shall be...

47 CFR 101.143 - Minimum path length requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.143 Minimum path length requirements. (a) The... carrier fixed point-to-point microwave services must equal or exceed the value set forth in the table...

47 CFR 101.143 - Minimum path length requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.143 Minimum path length requirements. (a) The... carrier fixed point-to-point microwave services must equal or exceed the value set forth in the table...

47 CFR 101.143 - Minimum path length requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.143 Minimum path length requirements. (a) The... carrier fixed point-to-point microwave services must equal or exceed the value set forth in the table...

47 CFR 101.143 - Minimum path length requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.143 Minimum path length requirements. (a) The... carrier fixed point-to-point microwave services must equal or exceed the value set forth in the table...

47 CFR 101.143 - Minimum path length requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.143 Minimum path length requirements. (a) The... carrier fixed point-to-point microwave services must equal or exceed the value set forth in the table...

Effects of fish farming on phytoplankton community under the thermal stress caused by a power plant in a eutrophic, semi-enclosed bay: induce toxic dinoflagellate (Prorocentrum minimum) blooms in cold seasons.

PubMed

Jiang, Zhibing; Liao, Yibo; Liu, Jingjing; Shou, Lu; Chen, Quanzhen; Yan, Xiaojun; Zhu, Genhai; Zeng, Jiangning

2013-11-15

Six cruises were conducted in a fish farm adjacent to the Ninghai Power Plant in Xiangshan Bay, East China Sea. Fish farming significantly increased NH4(+), DIP, and TOC concentrations, while it significantly decreased the DO level. These increase/decrease trends were more pronounced in warmer seasons. Although culture practices did not significantly increase phytoplankton density, it drastically enhanced dinoflagellate abundance and domination. Significant differences in species diversity and community composition between the cages and the control area were also observed. Temperature elevation caused by thermal discharge associated with eutrophication resulted in a dominant species shift from diatoms alone to dinoflagellates and diatoms. This is the first report of stress-induced toxic dinoflagellate (Prorocentrum minimum) blooms in winter and the winter-spring transition in this bay. Therefore, the effects of aquaculture activity and power plant construction in such a eutrophic, semi-enclosed bay require further attention. Copyright © 2013 Elsevier Ltd. All rights reserved.

Balancing building and maintenance costs in growing transport networks

NASA Astrophysics Data System (ADS)

Bottinelli, Arianna; Louf, Rémi; Gherardi, Marco

2017-09-01

The costs associated to the length of links impose unavoidable constraints to the growth of natural and artificial transport networks. When future network developments cannot be predicted, the costs of building and maintaining connections cannot be minimized simultaneously, requiring competing optimization mechanisms. Here, we study a one-parameter nonequilibrium model driven by an optimization functional, defined as the convex combination of building cost and maintenance cost. By varying the coefficient of the combination, the model interpolates between global and local length minimization, i.e., between minimum spanning trees and a local version known as dynamical minimum spanning trees. We show that cost balance within this ensemble of dynamical networks is a sufficient ingredient for the emergence of tradeoffs between the network's total length and transport efficiency, and of optimal strategies of construction. At the transition between two qualitatively different regimes, the dynamics builds up power-law distributed waiting times between global rearrangements, indicating a point of nonoptimality. Finally, we use our model as a framework to analyze empirical ant trail networks, showing its relevance as a null model for cost-constrained network formation.

The discrete prolate spheroidal filter as a digital signal processing tool

NASA Technical Reports Server (NTRS)

Mathews, J. D.; Breakall, J. K.; Karawas, G. K.

1983-01-01

The discrete prolate spheriodall (DPS) filter is one of the glass of nonrecursive finite impulse response (FIR) filters. The DPS filter is superior to other filters in this class in that it has maximum energy concentration in the frequency passband and minimum ringing in the time domain. A mathematical development of the DPS filter properties is given, along with information required to construct the filter. The properties of this filter were compared with those of the more commonly used filters of the same class. Use of the DPS filter allows for particularly meaningful statements of data time/frequency resolution cell values. The filter forms an especially useful tool for digital signal processing.

77 FR 76979 - Pesticides; Revisions to Minimum Risk Exemption

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-31

...EPA is proposing to more clearly describe the active and inert ingredients permitted in products eligible for the exemption from regulation for minimum risk pesticides. EPA is proposing to reorganize these lists with a focus on clarity and transparency by adding specific chemical identifiers. The identifiers would make it clearer to manufacturers; the public; and Federal, state, and tribal inspectors which ingredients are permitted in minimum risk pesticide products. EPA is also proposing to modify the label requirements in the exemption to require the use of specific common chemical names in lists of ingredients on minimum risk pesticide product labels, and to require producer contact information on the label. Once final, these proposed changes would maintain the availability of minimum risk pesticide products while providing more consistent information for consumers, clearer regulations for producers, and easier identification by states, tribes and EPA as to whether a product is in compliance with the exemption.

Nearshore Pipeline Installation Methods.

DTIC Science & Technology

1981-08-01

inches b) Pipe, materials of construction: fully rigid, semi-rigid, flexible c) Pipeline length, maximum 2 miles d) Pipeline design life , minimum 15...common to their operations. Permanent facilities are specified in the Statement of Work. There- fore, a minimum design life of 15 years is chosen, which...makes the pipe leakproof and resists corrosion and abrasion. 5) Interlocked Z-shaped steel or stainless steel carcass - resists internal and external

77 FR 8896 - Notice of Proposed Information Collection for 1029-0036

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-15

... request for Surface Mining Permit Applications--Minimum Requirements for Reclamation and Operation Plan... Permit Applications-- Minimum Requirements for Reclamation and Operation Plan. OSM is requesting a 3-year... Requirements for Reclamation and Operation Plan. OMB Control Number: 1029-0036. SUMMARY: Sections 507(b), 508(a...

29 CFR 780.300 - Statutory exemptions in section 13(a)(6).

Code of Federal Regulations, 2010 CFR

2010-07-01

... Employment in Agriculture That Is Exempted From the Minimum Wage and Overtime Pay Requirements Under Section... the Act exempts from the minimum wage requirements of section 6 and from the overtime pay requirements... 780.300 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR...

30 CFR 717.18 - Dams constructed of or impounding waste material.

Code of Federal Regulations, 2012 CFR

2012-07-01

... at least 3 feet to avoid overtopping by wind and wave action. (iii) Dams shall have minimum safety... pressures, internal erosion, sloughing, removal of material by solution, or erosion of material by loss into... regulatory authority before construction begins. (8) All dams shall be removed and the disturbed areas...

30 CFR 717.18 - Dams constructed of or impounding waste material.

Code of Federal Regulations, 2014 CFR

2014-07-01

... at least 3 feet to avoid overtopping by wind and wave action. (iii) Dams shall have minimum safety... pressures, internal erosion, sloughing, removal of material by solution, or erosion of material by loss into... regulatory authority before construction begins. (8) All dams shall be removed and the disturbed areas...

30 CFR 717.18 - Dams constructed of or impounding waste material.

Code of Federal Regulations, 2013 CFR

2013-07-01

... at least 3 feet to avoid overtopping by wind and wave action. (iii) Dams shall have minimum safety... pressures, internal erosion, sloughing, removal of material by solution, or erosion of material by loss into... regulatory authority before construction begins. (8) All dams shall be removed and the disturbed areas...

Constructing a Covariance Matrix that Yields a Specified Minimizer and a Specified Minimum Discrepancy Function Value.

ERIC Educational Resources Information Center

Cudeck, Robert; Browne, Michael W.

1992-01-01

A method is proposed for constructing a population covariance matrix as the sum of a particular model plus a nonstochastic residual matrix, with the stipulation that the model holds with a prespecified lack of fit. The procedure is considered promising for Monte Carlo studies. (SLD)

77 FR 2082 - Notice of Inventory Completion: Minnesota Indian Affairs Council, Bemidji, MN

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-13

.... The remains were removed during construction of a building and subsequently transferred to Bemidji.... At an unknown date, human remains representing, at minimum, one individual were recovered from a road construction project on Hwy 197 in Beltrami County, MN, and transferred to the Minnesota Office of the State...

Green Energy in New Construction: Maximize Energy Savings and Minimize Cost

ERIC Educational Resources Information Center

Ventresca, Joseph

2010-01-01

People often use the term "green energy" to refer to alternative energy technologies. But green energy doesn't guarantee maximum energy savings at a minimum cost--a common misconception. For school business officials, green energy means getting the lowest energy bills for the lowest construction cost, which translates into maximizing green energy…

A comparison of different postures for scaffold end-frame disassembly.

PubMed

Cutlip, R; Hsiao, H; Garcia, R; Becker, E; Mayeux, B

2000-10-01

Overexertion and fall injuries comprise the largest category of nonfatal injuries among scaffold workers. This study was conducted to identify the most favourable scaffold end-frame disassembly techniques and evaluate the associated slip potential by measuring whole-body isometric strength capability and required coefficient of friction (RCOF) to reduce the incidence of injury. Forty-six male construction workers were used to study seven typical postures associated with scaffold end-frame disassembly. An analysis of variance (ANOVA) showed that the isometric forces (334.4-676.3 N) resulting from the seven postures were significantly different (p < 0.05). Three of the disassembly postures resulted in considerable biomechanical stress to workers. The symmetric front-lift method with hand locations at knuckle height would be the most favourable posture; at least 93% of the male construction worker population could handle the end frame with minimum overexertion risk. The static RCOF value resulting from this posture during the disassembly phase was less than 0.2, thus the likelihood of a slip should be low.

42 CFR 84.143 - Terminal fittings or chambers; Type B supplied-air respirators; minimum requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF... supplied-air respirators; minimum requirements. (a) Blowers or connections to air supplies providing...

Minimum essential coverage and other rules regarding the shared responsibility payment for individuals. Final regulations.

PubMed

2014-11-26

This document contains final regulations relating to the requirement to maintain minimum essential coverage enacted by the Patient Protection and Affordable Care Act and the Health Care and Education Reconciliation Act of 2010, as amended by the TRICARE Affirmation Act and Public Law 111-173 (collectively, the Affordable Care Act). These final regulations provide individual taxpayers with guidance under section 5000A of the Internal Revenue Code on the requirement to maintain minimum essential coverage and rules governing certain types of exemptions from that requirement.

Study of power management technology for orbital multi-100KWe applications. Volume 2: Study results

NASA Technical Reports Server (NTRS)

Mildice, J. W.

1980-01-01

The preliminary requirements and technology advances required for cost effective space power management systems for multi-100 kilowatt requirements were identified. System requirements were defined by establishing a baseline space platform in the 250 KE KWe range and examining typical user loads and interfaces. The most critical design parameters identified for detailed analysis include: increased distribution voltages and space plasma losses, the choice between ac and dc distribution systems, shuttle servicing effects on reliability, life cycle costs, and frequency impacts to power management system and payload systems for AC transmission. The first choice for a power management system for this kind of application and size range is a hybrid ac/dc combination with the following major features: modular design and construction-sized minimum weight/life cycle cost; high voltage transmission (100 Vac RMS); medium voltage array or = 440 Vdc); resonant inversion; transformer rotary joint; high frequency power transmission line or = 20 KHz); energy storage on array side or rotary joint; fully redundant; and 10 year life with minimal replacement and repair.

What Is College and Career Readiness? State Requirements for High School Graduation and State Public University Admissions. Bulletin, Issue 23

ERIC Educational Resources Information Center

Conforti, Peter A.

2013-01-01

This paper compares the minimum requirements for high school graduation in each state with admission requirements for the state's main (or "flagship") university campus. In 80% of the states, the high school graduation requirements do not meet the minimum standards necessary for admission to their own state universities.

Design features that affect the maneuverability of wheelchairs and scooters.

PubMed

Koontz, Alicia M; Brindle, Eric D; Kankipati, Padmaja; Feathers, David; Cooper, Rory A

2010-05-01

To determine the minimum space required for wheeled mobility device users to perform 4 maneuverability tasks and to investigate the impact of selected design attributes on space. Case series. University laboratory, Veterans Affairs research facility, vocational training center, and a national wheelchair sport event. The sample of convenience included manual wheelchair (MWC; n=109), power wheelchair (PWC; n=100), and scooter users (n=14). A mock environment was constructed to create passageways to form an L-turn, 360 degrees -turn in place, and a U-turn with and without a barrier. Passageway openings were increased in 5-cm increments until the user could successfully perform each task without hitting the walls. Structural dimensions of the device and user were collected using an electromechanical probe. Mobility devices were grouped into categories based on design features and compared using 1-way analysis of variance and post hoc pairwise Bonferroni-corrected tests. Minimum passageway widths for the 4 maneuverability tasks. Ultralight MWCs with rear axles posterior to the shoulder had the shortest lengths and required the least amount of space compared with all other types of MWCs (P<.05). Mid-wheel-drive PWCs required the least space for the 360 degrees -turn in place compared with front-wheel-drive and rear-wheel-drive PWCs (P<.01) but performed equally as well as front-wheel-drive models on all other turning tasks. PWCs with seat functions required more space to perform the tasks. Between 10% and 100% of users would not be able to maneuver in spaces that meet current Accessibility Guidelines for Buildings and Facilities specifications. This study provides data that can be used to support wheelchair prescription and home modifications and to update standards to improve the accessibility of public areas.

Minimum visual requirements in different occupations in Finland.

PubMed

Aine, E

1984-01-01

In Finland the employers can individually fix the minimum visual requirements for their personnel in almost every occupation. In transportation, in police and national defence proper eyesight is regarded so important that strict visual requirements for these have been fixed by the Government. The regulations are often more close when accepting the person to the occupation than later on when working. The minimum requirements are mostly stated for visual acuity, colour perception and visual fields. In some occupations the regulations concern also the refractive error of the eyes and possible eye diseases. In aviation the regulations have been stated by the International Civil Aviation Organization ( ICAO ). The minimum visual requirements for a driving license in highway traffic are classed according to the types of motor vehicles. In railways , maritime commerce and national defence the task of the worker determines the specified regulations. The policeman must have a distant visual acuity of 0.5 without eyeglasses in both eyes and nearly normal colour perception when starting the training course.

A Cross-sectional Analysis of Minimum USMLE Step 1 and 2 Criteria Used by Orthopaedic Surgery Residency Programs in Screening Residency Applications.

PubMed

Schrock, John B; Kraeutler, Matthew J; Dayton, Michael R; McCarty, Eric C

2017-06-01

The purpose of this study was to analyze how program directors (PDs) of orthopaedic surgery residency programs use United States Medical Licensing Examination (USMLE) Step 1 and 2 scores in screening residency applicants. A survey was sent to each allopathic orthopaedic surgery residency PD. PDs were asked if they currently use minimum Step 1 and/or 2 scores in screening residency applicants and if these criteria have changed in recent years. Responses were received from 113 of 151 PDs (75%). One program did not have the requested information and five declined participation, leaving 107 responses analyzed. Eighty-nine programs used a minimum USMLE Step 1 score (83%). Eighty-three programs (78%) required a Step 1 score ≥210, 80 (75%) required a score ≥220, 57 (53%) required a score ≥230, and 22 (21%) required a score ≥240. Multiple PDs mentioned the high volume of applications as a reason for using a minimum score and for increasing the minimum score in recent years. A large proportion of orthopaedic surgery residency PDs use a USMLE Step 1 minimum score when screening applications in an effort to reduce the number of applications to be reviewed.

Ultra-High-Performance Concrete And Advanced Manufacturing Methods For Modular Construction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sawab, Jamshaid; Lim, Ing; Mo, Yi-Lung

Small modular reactors (SMR) allow for less onsite construction, increase nuclear material security, and provide a flexible and cost-effective energy alternative. SMR can be factory-built as modular components, and shipped to desired locations for fast assembly. This project successfully developed a new class of ultra-high performance concrete (UHPC), which features a compressive strength greater than 22 ksi (150 MPa) without special treatment and self-consolidating characteristics desired for SMR modular construction. With an ultra-high strength and dense microstructure, it will facilitate rapid construction of steel plate-concrete (SC) beams and walls with thinner and lighter modules, and can withstand harsh environments andmore » mechanical loads anticipated during the service life of nuclear power plants. In addition, the self-consolidating characteristics are crucial for the fast construction and assembly of SC modules with reduced labor costs and improved quality. Following the UHPC material development, the capacity of producing self-consolidating UHPC in mass quantities was investigated and compared to accepted self-consolidating concrete standards. With slightly adjusted mixing procedure using large-scale gravity-based mixers (compared with small-scale force-based mixer), the self-consolidating UHPC has been successfully processed at six cubic yards; the product met both minimum compressive strength requirements and self-consolidating concrete standards. Steel plate-UHPC beams (15 ft. long, 12 in. wide and 16 in. deep) and wall panels (40 in. X 40 in. X 3 in.) were then constructed using the self-consolidating UHPC without any external vibration. Quality control guidelines for producing UHPC in large scale were developed. When the concrete is replaced by UHPC in a steel plate concrete (SC) beam, it is critical to evaluate its structural behavior with both flexure and shear-governed failure modes. In recent years, SC has been widely used for buildings and nuclear containment structures to resist lateral forces induced by severe earthquakes and heavy winds. SC modules have good potential for SMR because of their cost-effectiveness and reduced construction time. However, the minimum shear reinforcement (i.e. cross tie) ratio needs to be determined for the steel plate-UHPC (S-UHPC) beams to exhibit a ductile failure mode. In this project, S-UHPC beams were designed and constructed. The beams were tested to evaluate structural capacity and identify the minimum cross ties ratios. In addition, as the bond between UHPC and steel plate is essential for ensuring structural integrity under shear and flexure, it was measured and examined in this project through digital image correlation system and smart piezoelectric aggregate sensors. Large-scale testing and finite element simulation were also performed on S-UHPC wall panels. New bond slip-based constitutive models of steel plate were developed for S-UHPC, which were used in finite element analysis program to predict S-UHPC behavior under shear. The results were well validated through experimental data. The long-term durability of UHPC were established in this project. UHPC specimens were tested under free shrinkage, restrained shrinkage, elevated temperature, water permeation, chloride diffusion, corrosion, and alkali silica reaction. UHPC has demonstrated significantly improved durability compared with control concrete specimens. This research led to a new generation of steel plate-UHPC modules for SMR that can provide large benefits to the electric power industry. Taking advantage of the high strength and durability of UHPC, their modularity and ease of assembly can address the high cost barriers of typical nuclear power plants.« less

30 CFR 947.784 - Underground mining permit applications-minimum requirements for reclamation and operation plan.

Code of Federal Regulations, 2010 CFR

2010-07-01

... requirements for reclamation and operation plan. 947.784 Section 947.784 Mineral Resources OFFICE OF SURFACE... for reclamation and operation plan. (a) Part 784 of this chapter, Underground Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes...