42 CFR 84.256 - Quality control requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 1 2011-10-01 2011-10-01 false Quality control requirements. 84.256 Section 84.256... § 84.256 Quality control requirements. (a) In addition to the construction and performance requirements specified in §§ 84.251, 84.252, 84.253, 84.254, and 84.255, the quality control requirements in paragraphs...

42 CFR 84.256 - Quality control requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 1 2014-10-01 2014-10-01 false Quality control requirements. 84.256 Section 84.256... § 84.256 Quality control requirements. (a) In addition to the construction and performance requirements specified in §§ 84.251, 84.252, 84.253, 84.254, and 84.255, the quality control requirements in paragraphs...

Effects of highway construction on stream water quality and macroinvertebrate condition in a Mid-Atlantic Highlands watershed, USA

USGS Publications Warehouse

Chen, Y.; Viadero, R.C.; Wei, X.; Fortney, Ronald H.; Hedrick, Lara B.; Welsh, S.A.; Anderson, James T.; Lin, L.-S.

2009-01-01

Refining best management practices (BMPs) for future highway construction depends on a comprehensive understanding of environmental impacts from current construction methods. Based on a before-after-control impact (BACI) experimental design, long-term stream monitoring (1997-2006) was conducted at upstream (as control, n = 3) and downstream (as impact, n = 6) sites in the Lost River watershed of the Mid-Atlantic Highlands region, West Virginia. Monitoring data were analyzed to assess impacts of during and after highway construction on 15 water quality parameters and macroinvertebrate condition using the West Virginia stream condition index (WVSCI). Principal components analysis (PCA) identified regional primary water quality variances, and paired t tests and time series analysis detected seven highway construction-impacted water quality parameters which were mainly associated with the second principal component. In particular, impacts on turbidity, total suspended solids, and total iron during construction, impacts on chloride and sulfate during and after construction, and impacts on acidity and nitrate after construction were observed at the downstream sites. The construction had statistically significant impacts on macroinvertebrate index scores (i.e., WVSCI) after construction, but did not change the overall good biological condition. Implementing BMPs that address those construction-impacted water quality parameters can be an effective mitigation strategy for future highway construction in this highlands region. Copyright ?? 2009 by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America. All rights reserved.

Quality control and quality assurance of hot mix asphalt construction in Delaware.

DOT National Transportation Integrated Search

2006-07-01

Since the mid 60s the Federal Highway Administration began to encourage : Departments of Transportation and Contractors toward the use of quality control and : quality assurance (QA/QC) specifications, which are statistically based. : For example,...

A Validity-Based Approach to Quality Control and Assurance of Automated Scoring

ERIC Educational Resources Information Center

Bejar, Isaac I.

2011-01-01

Automated scoring of constructed responses is already operational in several testing programmes. However, as the methodology matures and the demand for the utilisation of constructed responses increases, the volume of automated scoring is likely to increase at a fast pace. Quality assurance and control of the scoring process will likely be more…

Study on the Quality Management of Building Electricity Engineering Construction in the Whole Process

NASA Astrophysics Data System (ADS)

Qin, Minwu

2018-05-01

With the progress of science and technology, people use more and more types of electrical equipment and the functions are more and more complicated, which put forward higher requirements on the construction quality of electrical construction. If you ignore some of the necessary quality requirements and violate the specification of operation in the process of building electrical construction, that will bring great security risks and resulting in huge economic losses, even endanger personal safety. Manage and control construction quality of building electrical construction must be carried out throughout the whole process of construction. According to the construction characteristics of building electrical construction, this article analyze the construction details that are easy to be ignored but very important in the construction, based on management theory and put forward the methods of quality management in the whole process of building electrical construction. This template explains and demonstrates how to prepare your camera-ready paper for Trans Tech Publications. The best is to read these instructions and follow the outline of this text.

18 CFR 12.40 - Quality control programs.

Code of Federal Regulations, 2014 CFR

2014-04-01

... PROJECT WORKS Other Responsibilities of Applicant or Licensee § 12.40 Quality control programs. (a) General rule. During any construction, repair, or modification of project works, including any corrective... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Quality control...

18 CFR 12.40 - Quality control programs.

Code of Federal Regulations, 2013 CFR

2013-04-01

... PROJECT WORKS Other Responsibilities of Applicant or Licensee § 12.40 Quality control programs. (a) General rule. During any construction, repair, or modification of project works, including any corrective... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Quality control...

18 CFR 12.40 - Quality control programs.

Code of Federal Regulations, 2012 CFR

2012-04-01

... PROJECT WORKS Other Responsibilities of Applicant or Licensee § 12.40 Quality control programs. (a) General rule. During any construction, repair, or modification of project works, including any corrective... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Quality control...

QUALITY ASSURANCE AND QUALITY CONTROL FOR WASTE CONTAINMENT FACILITIES. Project Summary

EPA Science Inventory

It is generally agreed that both quality assurance (QA) and quality control (QC) are essential to the proper installation and eventual performance of environmentally safe and secure waste containment systems. Even further, there are both manufacturing and construction aspects to...

Use of ground penetrating radar for construction quality assurance of concrete pavement.

DOT National Transportation Integrated Search

2009-11-01

Extracting concrete cores is the most common method for measuring the thickness of concrete pavement for construction : quality control. Although this method provides a relatively accurate thickness measurement, it is destructive, labor : intensive, ...

Study on the quality of FRP fishing vessel based on improved Fishbone Chart

NASA Astrophysics Data System (ADS)

Sui, J. H.; Yu, Y. F.; Du, Q. F.; Jiang, D. W.

2018-01-01

The construction quality of FRP fishing vessels influences their production, use and industry development. In order to explore the factors that affect the construction quality of FRP fishing vessels, key factors affecting the construction quality of FRP fishing vessels are determined based on the quality problems of FRP fishing vessels constructed. The improved Fishbone Chart is used to analyze the eight factors of “human, machine, material, process, environment, inspection, design and information”. Taking the factors that affect the construction quality of FRP fishing vessels as the central target, the eight influencing factors were condensed into five aspects and a composite Fishbone Chart is drawn. The Fishbone Chart is used as the basic model, the influencing factors are sorted, screened and discriminated, and the system model convenient for construction site management and control is established. Finally, the causes of poor construction of FRP fishing vessels are analyzed and discussed, and relevant suggestions are put forward.

Effect on asphalt quality due to nighttime construction : final report.

DOT National Transportation Integrated Search

2017-06-01

The objectives of this project were to identify and analyze the nighttime paving traffic control standards in other states and compare the effects of daytime vs. nighttime paving on quality, safety, costs, and construction time. Surveys of various De...

Educational Auditing and Quality Assurance. Occasional Paper No. 4.

ERIC Educational Resources Information Center

Conner, James E.; Lessinger, Leon M.

This paper considers how to respond to new requirements for adequate disclosure of the schools' performance to the public. It proposes the use of three powerful constructs--quality control, quality assurance, and an independent educational accomplishment audit (IEAA). The essential elements of quality control are agreeing on and specifying desired…

Quality control of recycled asphaltic concrete : final report.

DOT National Transportation Integrated Search

1982-07-01

This study examined the variations found in recycled asphaltic concrete mix based upon plant quality control data and verification testing. The data was collected from four recycled hot-mix projects constructed in 1981. All plant control and acceptan...

Evaluation of non-destructive technologies for construction quality control of HMA and PCC pavements in Louisiana.

DOT National Transportation Integrated Search

2013-11-01

Current roadway quality control and quality acceptance (QC/QA) procedures for the Louisiana Department of Transportation and : Development (LADOTD) include coring for thickness, density, and air voids in hot mix asphalt (HMA) pavements and thickness ...

Statistical quality control and quality assurance evaluation of structural & paving concrete : phase I final report.

DOT National Transportation Integrated Search

2001-08-01

This report discusses the variability associated with the production, construction, and testing of structural and paving concrete. The study evaluated data from over 900 projects constructed between 1992 and 1999, representing over 25,000 lots. The d...

Oregon Department of Transportation research leader : fall 2008.

DOT National Transportation Integrated Search

2008-01-01

The newsletter includes: : 1) To ensure safe travel through construction work zones, Traffic Control Plans (TCPs) are developed to communicate required traffic control measures to the construction team. The quality of the design and implementation of...

Evaluation of Safety, Quality and Productivity in Construction

NASA Astrophysics Data System (ADS)

Usmen, M. A.; Vilnitis, M.

2015-11-01

This paper examines the success indicators of construction projects, safety, quality and productivity, in terms of their implications and impacts during and after construction. First safety is considered during construction with a focus on hazard identification and the prevention of occupational accidents and injuries on worksites. The legislation mandating safety programs, training and compliance with safety standards is presented and discussed. Consideration of safety at the design stage is emphasized. Building safety and the roles of building codes in prevention of structural failures are also covered in the paper together with factors affecting building failures and methods for their prevention. Quality is introduced in the paper from the perspective of modern total quality management. Concepts of quality management, quality control, quality assurance and Six Sigma and how they relate to building quality and structural integrity are discussed with examples. Finally, productivity concepts are presented with emphasis on effective project management to minimize loss of productivity, complimented by lean construction and lean Six Sigma principles. The paper concludes by synthesizing the relationships between safety, quality and productivity.

Evaluation of non-destructive technologies for construction quality control of HMA and PCC pavements in Louisiana : [tech summary].

DOT National Transportation Integrated Search

2013-11-01

Current roadway quality control and quality acceptance (QC/QA) procedures for the Louisiana Department of Transportation and Development : (LADOTD) include coring for thickness, density, and air voids in hot mix asphalt (HMA) pavements and thickness ...

Evaluation of non-destructive technologies for construction quality control of HMA and PCC pavements in Louisiana : [research project capsule].

DOT National Transportation Integrated Search

2009-07-01

Current roadway quality control and quality acceptance (QC/QA) procedures : for Louisiana include coring for thickness, density, and air void checks in hot : mix asphalt (HMA) pavements and thickness and compressive strength for : Portland cement con...

Numerical simulation of intelligent compaction technology for construction quality control.

DOT National Transportation Integrated Search

2014-12-01

Intelligent compaction (IC) technique is a fast-developing technology for compaction quality control and acceptance. Proof rolling using the intelligent compaction rollers after completing compaction can eectively identify : the weak spots and sig...

Development of a quality control test procedure for characterizing fracture properties of asphalt mixtures.

DOT National Transportation Integrated Search

2011-06-01

The main objective of this study is to investigate the use of the semi-circular bend (SCB) : test as a quality assurance/quality control (QA/QC) measure for field construction. : Comparison of fracture properties from the SCB test and fatigue beam te...

Rocky Mountain Arsenal, Sanitary Sewer Interim Response Action, Construction Documents for New Sanitary Sewer Construction. Volume 2

DTIC Science & Technology

1990-05-01

curves ; test reports; test cylinders: samples, O&M manuals including parts lists; certifications; warranties and other such required submittals...purpose. 14.4.3. Authority and responsibilities of all quality control personnel. 14.4.4. Schedule of Use of inspection personnel by types and phase of...quality control program shall include four phases of inspection and tests. The Contracting Officer’s representative shall be notified at least 24

Testing and analysis of LWT and SCB properties of asphalt concrete mixtures.

DOT National Transportation Integrated Search

2016-04-01

Currently, Louisianas Quality Control and Quality Assurance (QC/QA) practice for asphalt mixtures in : pavement construction is mainly based on controlling properties of plant produced mixtures that include : gradation and asphalt content, voids f...

Embankment quality and assessment of moisture control implementation.

DOT National Transportation Integrated Search

2016-02-01

A specification for contractor moisture quality control (QC) in roadway embankment construction has been in use for approximately 10 : years in Iowa on about 190 projects. The use of this QC specification and the development of the soils certificatio...

Quality control and in-service inspection technology for hybrid-composite girder bridges.

DOT National Transportation Integrated Search

2014-08-01

This report describes efforts to develop quality control tools and in-service inspection technologies for the fabrication and construction of Hybrid Composite Beams (HCBs). HCBs are a new bridge technology currently being evaluated by the Missouri De...

Design and Establishment of Quality Model of Fundamental Geographic Information Database

NASA Astrophysics Data System (ADS)

Ma, W.; Zhang, J.; Zhao, Y.; Zhang, P.; Dang, Y.; Zhao, T.

2018-04-01

In order to make the quality evaluation for the Fundamental Geographic Information Databases(FGIDB) more comprehensive, objective and accurate, this paper studies and establishes a quality model of FGIDB, which formed by the standardization of database construction and quality control, the conformity of data set quality and the functionality of database management system, and also designs the overall principles, contents and methods of the quality evaluation for FGIDB, providing the basis and reference for carry out quality control and quality evaluation for FGIDB. This paper designs the quality elements, evaluation items and properties of the Fundamental Geographic Information Database gradually based on the quality model framework. Connected organically, these quality elements and evaluation items constitute the quality model of the Fundamental Geographic Information Database. This model is the foundation for the quality demand stipulation and quality evaluation of the Fundamental Geographic Information Database, and is of great significance on the quality assurance in the design and development stage, the demand formulation in the testing evaluation stage, and the standard system construction for quality evaluation technology of the Fundamental Geographic Information Database.

Cairo consensus on the IVF laboratory environment and air quality: report of an expert meeting.

PubMed

Mortimer, D; Cohen, J; Mortimer, S T; Fawzy, M; McCulloh, D H; Morbeck, D E; Pollet-Villard, X; Mansour, R T; Brison, D R; Doshi, A; Harper, J C; Swain, J E; Gilligan, A V

2018-03-02

This proceedings report presents the outcomes from an international Expert Meeting to establish a consensus on the recommended technical and operational requirements for air quality within modern assisted reproduction technology (ART) laboratories. Topics considered included design and construction of the facility, as well as its heating, ventilation and air conditioning system; control of particulates, micro-organisms (bacteria, fungi and viruses) and volatile organic compounds (VOCs) within critical areas; safe cleaning practices; operational practices to optimize air quality while minimizing physicochemical risks to gametes and embryos (temperature control versus air flow); and appropriate infection-control practices that minimize exposure to VOC. More than 50 consensus points were established under the general headings of assessing site suitability, basic design criteria for new construction, and laboratory commissioning and ongoing VOC management. These consensus points should be considered as aspirational benchmarks for existing ART laboratories, and as guidelines for the construction of new ART laboratories. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Are globals for health, well-being and quality of life interchangeable? A mixed methods study in ankylosing spondylitis patients and controls.

PubMed

van Tubergen, Astrid; Gulpen, Anouk; Landewé, Robert; Boonen, Annelies

2018-05-19

Patients' experience of overall health is often assessed through a single-item global question. Here, we evaluated among patients with AS and population controls whether single-item questions on the constructs health, well-being and quality of life (QoL) are interchangeable. In a mixed quantitative and qualitative approach, all subjects scored the three single-item globals on a numeric rating scale (0-10, best). Next, they indicated for each of the questions which aspects they had been considering when scoring. After forced reflection, globals were scored again. Dissimilarities in scores among constructs, between patients and controls, and before or after reflection were tested using mixed linear models. Themes identified per construct in the qualitative part were linked to the International Classification of Functioning, Disability and Health. The type of themes per construct was compared between patients and controls. Sixty-eight AS patients and 84 controls completed the questionnaire. Patients scored significantly worse on each global than controls (mean 6.1-6.3 vs 7.2-7.6, all P < 0.01). Within groups, however, no significant differences in scores on each construct, or in scores before or after forced reflection were found. Health-related themes were relevant to each construct for patients, but were less relevant for controls when considering well-being and QoL. Emotional functions were relevant to well-being in all participants. Social roles and financial situation were more frequently related to well-being and QoL in controls. While patients and controls identified content-related dissimilarities between the three constructs studied, this was not reflected in different scores of the globals.

Assessment of in-situ test technology for construction control of base courses and embankments.

DOT National Transportation Integrated Search

2004-05-01

With the coming move from an empirical to mechanistic-empirical pavement design, it is essential to improve the quality control/quality assurance (QC/QA) procedures of compacted materials from a density-based criterion to a stiffness/strength-based c...

Quality Control in construction.

DTIC Science & Technology

1984-01-01

behavioral scientists. In 1962, Dr. Kaoru Ishikawa gave shape to the form of training which featured intradepartmental groups of ten or so workers seated...and Japanese circles bears closer scrutiny. 4.3.1 Japanese Ingredients of Quality The founder of quality circles, Dr. Kaoru Ishikawa , gives six...around 51 a table; hence the name Quality Control Circle. 4 Dr. 0 Ishikawa was an engineering professor at Tokyo University, and the circles were

40 CFR 35.400 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Pollution Control), 205(j)(2) (Water Quality Management Planning), and 104(b)(3) (Water Quality Cooperative... quality management activities are provided in 40 CFR part 130. ... program. EPA awards these grants for the following two purposes: (1) Construction management grants. A...

Using Basic Quality Management Concepts to Produce Total Quality School Buildings.

ERIC Educational Resources Information Center

Herman, Jerry J.

1994-01-01

Quality control in designing and building school buildings depends on customer feedback. Outlines and graphically demonstrates the interrelationships among the input sources; the information acquired; and the three phases of predesign, construction, and completion. (MLF)

Comparisons of mosquito populations before and after construction of a wetland for water quality improvement in Pitt County, North Carolina, and data-reliant vectorborne disease management.

PubMed

Anderson, Alice L; O'Brien, Kevin; Hartwell, Megan

2007-04-01

Wetlands serve an important purpose in flood control and water quality, but constructed-wetland sites also provide habitats for mosquito breeding. Communities near constructed-wetland sites often raise a "mosquito" objection when constructed wetlands are proposed. Wildlife and wetland advocates can confuse the public by making unsubstantiated claims about natural predators eliminating or controlling mosquito problems in a constructed wetland. Management of constructed-wetland mosquito habitat, with adequate mosquito surveillance and data analysis, can help lead to a successful project and satisfied citizens. The cooperative project described in this paper, was conducted in the town of Simpson, North Carolina, and was designed to determine the mosquito population impact of wetland construction at Mill Branch Stream, a small tributary of the Tar River in Eastern North Carolina. In the authors' analysis of three years of mosquito surveillance data, month (time of year standing in for temperature and day length) was a significant factor in regression analysis for mosquito numbers, but rainfall was not. Numbers of mosquitoes were not found to be significantly higher after construction than before construction.

Training and certification for construction inspectors : final report.

DOT National Transportation Integrated Search

2016-11-01

Construction inspectors are an important asset to the success of a Department of Transportation; they provide quality control for state- and federally funded transportation infrastructure projects. A majority of departments of transportation in the U...

TECHNICAL GUIDANCE DOCUMENT: THE FABRICATION OF POLYETHYLENE FML FIELD SEAMS

EPA Science Inventory

This technical guidance document is meant to augment the numerous construction quality control and construction assurance (CQC and CQA) guidelines that are presently available for high density polyethylene (HDPE) liner installation and inspection.

Feasibility analysis of base compaction specification : [project brief].

DOT National Transportation Integrated Search

2013-02-01

Appropriate design and construction of the aggregate base layer has significant influence on : structural stability and performance of pavements. Controlling the construction quality of : the granular base layer is important to achieve long-lasting p...

Bel Marin Keys Unit V Expansion of the Hamilton Wetland Restoration Project. Volume 3. Responses to Comments, Final Supplemental Environmental Impact Report/Environmental Impact Statement

DTIC Science & Technology

2003-04-01

include a program for implementing new development and construction site storm water quality controls. The objective of this component is to ensure...impacts (see Storm Water Quality Control, below). The Regional Board has adopted U.S. EPA’s Clean Water Act Section 404(b)(1) "Guidelines for...other Waters of the State. Storm Water Quality Control Storm water is the major source of fresh water to creeks and waterways. Storm water quality is

Quality control of fireproof coatings for reinforced concrete structures

NASA Astrophysics Data System (ADS)

Gravit, Marina; Dmitriev, Ivan; Ishkov, Alexander

2017-10-01

The article analyzes methods of quality inspection of fireproof coatings (work flow, measuring, laboratory, etc.). In modern construction there is a problem of lack of distinct monitoring for the fire protection testing. There is a description of this testing for reinforced concrete structures. The article shows the results of calculation quality control of hatches as an example of fireproof coating for reinforced concrete structures.

A Novel Hybrid Error Criterion-Based Active Control Method for on-Line Milling Vibration Suppression with Piezoelectric Actuators and Sensors

PubMed Central

Zhang, Xingwu; Wang, Chenxi; Gao, Robert X.; Yan, Ruqiang; Chen, Xuefeng; Wang, Shibin

2016-01-01

Milling vibration is one of the most serious factors affecting machining quality and precision. In this paper a novel hybrid error criterion-based frequency-domain LMS active control method is constructed and used for vibration suppression of milling processes by piezoelectric actuators and sensors, in which only one Fast Fourier Transform (FFT) is used and no Inverse Fast Fourier Transform (IFFT) is involved. The correction formulas are derived by a steepest descent procedure and the control parameters are analyzed and optimized. Then, a novel hybrid error criterion is constructed to improve the adaptability, reliability and anti-interference ability of the constructed control algorithm. Finally, based on piezoelectric actuators and acceleration sensors, a simulation of a spindle and a milling process experiment are presented to verify the proposed method. Besides, a protection program is added in the control flow to enhance the reliability of the control method in applications. The simulation and experiment results indicate that the proposed method is an effective and reliable way for on-line vibration suppression, and the machining quality can be obviously improved. PMID:26751448

The construction of control chart for PM10 functional data

NASA Astrophysics Data System (ADS)

Shaadan, Norshahida; Jemain, Abdul Aziz; Deni, Sayang Mohd

2014-06-01

In this paper, a statistical procedure to construct a control chart for monitoring air quality (PM10) using functional data is proposed. A set of daily indices that represent the daily PM10 curves were obtained using Functional Principal Component Analysis (FPCA). By means of an iterative charting procedure, a reference data set that represented a stable PM10 process was obtained. The data were then used as a reference for monitoring future data. The application of the procedure was conducted using seven-year (2004-2010) period of recorded data from the Klang air quality monitoring station located in the Klang Valley region of Peninsular Malaysia. The study showed that the control chart provided a useful visualization tool for monitoring air quality and was capable in detecting abnormality in the process system. As in the case of Klang station, the results showed that with reference to 2004-2008, the air quality (PM10) in 2010 was better than that in 2009.

75 FR 6597 - Determination to Approve Alternative Final Cover Request for the Lake County, MT Landfill...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-10

... layer, a 24-inch native sand layer, an 18-inch imported silt evapotranspiration layer, and a 6-inch... Quality Assurance & Control Plan'' for the closure project that specifies that testing will be performed... described in detail in the ``Construction Quality Assurance & Control Plan.'' II. EPA's Action A...

Napa River Salt Marsh Restoration Project. Volume 2: Environmental Impact Statement Comments Letters and Response

DTIC Science & Technology

2004-06-01

The SWMPs must include a program for implementing new development and construction site storm water quality controls. The objective of this...mitigate those impacts (see Storm Water Quality Control, below). The Regional Board has adopted U.S. EPA’s Clean Water Act Section 404(b)(1...impacts to wetlands or other Waters of the State. Storm Water Quality Control Storm water is the major source of fresh water to creeks and waterways. Storm

Field evaluation of hydromulches for water quality and vegetation establishment.

DOT National Transportation Integrated Search

2013-03-01

Soil erosion and sediment pollution can be major problems in and around construction sites due to land disturbing activities that leave areas of : unprotected soil during active construction. Establishing vegetation to control erosion can be difficul...

State-of-the-art in asphalt pavement specifications

DOT National Transportation Integrated Search

1984-07-01

The great increase in highway construction beginning in the 1950's made evident the need for better control of materials .and construction. A comprehensive research and development program was begun to use statistical methods for quality assurance in...

Testing guide for implementing concrete paving quality control procedures.

DOT National Transportation Integrated Search

2008-03-01

Construction of portland cement concrete pavements is a complex process. A small fraction of the concrete pavements constructed in the : United States over the last few decades have either failed prematurely or exhibited moderate to severe distress. ...

3D laser scanning for quality control and assurance in bridge deck construction.

DOT National Transportation Integrated Search

2014-08-01

The inspection of installations of rebar and other embedded components in bridge deck construction is a tedious : task for eld inspectors, requiring considerable eld time for measurement and verication against code requirement. The verica...

Improved latrine cleanliness through behaviour change and changes in quality of latrine construction: a longitudinal intervention study in rural Burundi.

PubMed

Mosler, Hans-Joachim; Sonego, Ina Lucia

2017-10-01

Latrine cleanliness increased in the intervention group compared to the control group (increase from 21 to 31 % of latrines classified as clean in intervention [N = 198] and decrease from 37 to 27 % in control [N = 91]). Improved habitual latrine cleaning lead to latrines being 3.5 times more likely to improve in observed latrine cleanliness (χ 2  = 16.36, p < .001) and so did improvements in quality of latrine construction, eg households that had installed a lid were 7.39 times more likely to have a cleaner latrine (χ 2  = 4.46, p < .05). Changes in psychosocial factors, namely forgetting, personal norm, satisfaction with cleanliness, explained much of the change in habitual latrine cleaning (adj. r 2  = .46). Behaviour change interventions targeting psychosocial factors and quality of latrine construction seem promising to ensure clean and hygienic latrines.

23 CFR 650.207 - Plans, specifications and estimates.

Code of Federal Regulations, 2010 CFR

2010-04-01

... OPERATIONS BRIDGES, STRUCTURES, AND HYDRAULICS Erosion and Sediment Control on Highway Construction Projects... highway project designs for the control of erosion and sedimentation and the protection of water quality...

23 CFR 650.207 - Plans, specifications and estimates.

Code of Federal Regulations, 2014 CFR

2014-04-01

... OPERATIONS BRIDGES, STRUCTURES, AND HYDRAULICS Erosion and Sediment Control on Highway Construction Projects... highway project designs for the control of erosion and sedimentation and the protection of water quality...

23 CFR 650.207 - Plans, specifications and estimates.

Code of Federal Regulations, 2013 CFR

2013-04-01

... OPERATIONS BRIDGES, STRUCTURES, AND HYDRAULICS Erosion and Sediment Control on Highway Construction Projects... highway project designs for the control of erosion and sedimentation and the protection of water quality...

23 CFR 650.207 - Plans, specifications and estimates.

Code of Federal Regulations, 2011 CFR

2011-04-01

... OPERATIONS BRIDGES, STRUCTURES, AND HYDRAULICS Erosion and Sediment Control on Highway Construction Projects... highway project designs for the control of erosion and sedimentation and the protection of water quality...

23 CFR 650.207 - Plans, specifications and estimates.

Code of Federal Regulations, 2012 CFR

2012-04-01

... OPERATIONS BRIDGES, STRUCTURES, AND HYDRAULICS Erosion and Sediment Control on Highway Construction Projects... highway project designs for the control of erosion and sedimentation and the protection of water quality...

Exploring constructs of well-being, happiness and quality of life.

PubMed

Medvedev, Oleg N; Landhuis, C Erik

2018-01-01

Existing definitions of happiness, subjective well-being, and quality of life suggest conceptual overlap between these constructs. This study explored the relationship between these well-being constructs by applying widely used measures with satisfactory psychometric properties. University students ( n = 180) completed widely used well-being measures including the Oxford Happiness Questionnaire (OHQ), the World Health Organization Quality of Life Questionnaire, the Satisfaction with Life Scale, and the Positive and Negative Affect Scale. We analyzed the data using correlation, regression, and exploratory factor analysis. All included well-being measures demonstrated high loadings on the global well-being construct that explains about 80% of the variance in the OHQ, the psychological domain of Quality of Life and subjective well-being. The results show high positive correlations between happiness, psychological and health domains of quality of life, life satisfaction, and positive affect. Social and environmental domains of quality of life were poor predictors of happiness and subjective well-being after controlling for psychological quality of life. Together, these data provide support for a global well-being dimension and interchangeable use of terms happiness, subjective well-being, and psychological quality of life with the current sample and measures. Further investigation with larger heterogeneous samples and other well-being measures is warranted.

Exploring constructs of well-being, happiness and quality of life

PubMed Central

Landhuis, C. Erik

2018-01-01

Background Existing definitions of happiness, subjective well-being, and quality of life suggest conceptual overlap between these constructs. This study explored the relationship between these well-being constructs by applying widely used measures with satisfactory psychometric properties. Materials and Methods University students (n = 180) completed widely used well-being measures including the Oxford Happiness Questionnaire (OHQ), the World Health Organization Quality of Life Questionnaire, the Satisfaction with Life Scale, and the Positive and Negative Affect Scale. We analyzed the data using correlation, regression, and exploratory factor analysis. Results All included well-being measures demonstrated high loadings on the global well-being construct that explains about 80% of the variance in the OHQ, the psychological domain of Quality of Life and subjective well-being. The results show high positive correlations between happiness, psychological and health domains of quality of life, life satisfaction, and positive affect. Social and environmental domains of quality of life were poor predictors of happiness and subjective well-being after controlling for psychological quality of life. Conclusion Together, these data provide support for a global well-being dimension and interchangeable use of terms happiness, subjective well-being, and psychological quality of life with the current sample and measures. Further investigation with larger heterogeneous samples and other well-being measures is warranted. PMID:29876148

Long-term pavement performance indicators for failed materials.

DOT National Transportation Integrated Search

2016-04-01

State Transportation Agencies (STAs) use quality control/quality assurance (QC/QA) specifications to guide the testing and inspection of : road pavement construction. Although failed materials of pavement rarely occur in practice, it is critical to h...

Establishing the effectiveness of patient decision aids: key constructs and measurement instruments

PubMed Central

2013-01-01

Background Establishing the effectiveness of patient decision aids (PtDA) requires evidence that PtDAs improve the quality of the decision-making process and the quality of the choice made, or decision quality. The aim of this paper is to review the theoretical and empirical evidence for PtDA effectiveness and discuss emerging practical and research issues in the measurement of effectiveness. Methods This updated overview incorporates: a) an examination of the instruments used to measure five key decision-making process constructs (i.e., recognize decision, feel informed about options and outcomes, feel clear about goals and preferences, discuss goals and preferences with health care provider, and be involved in decisions) and decision quality constructs (i.e., knowledge, realistic expectations, values-choice agreement) within the 86 trials in the Cochrane review; and b) a summary of the 2011 Cochrane Collaboration’s review of PtDAs for these key constructs. Data on the constructs and instruments used were extracted independently by two authors from the 86 trials and any disagreements were resolved by discussion, with adjudication by a third party where required. Results The 86 studies provide considerable evidence that PtDAs improve the decision-making process and decision quality. A majority of the studies (76/86; 88%) measured at least one of the key decision-making process or decision quality constructs. Seventeen different measurement instruments were used to measure decision-making process constructs, but no single instrument covered all five constructs. The Decisional Conflict Scale was most commonly used (n = 47), followed by the Control Preference Scale (n = 9). Many studies reported one or more constructs of decision quality, including knowledge (n = 59), realistic expectation of risks and benefits (n = 21), and values-choice agreement (n = 13). There was considerable variability in how values-choice agreement was defined and determined. No study reported on all key decision-making process and decision quality constructs. Conclusions Evidence of PtDA effectiveness in improving the quality of the decision-making process and decision quality is strong and growing. There is not, however, consensus or standardization of measurement for either the decision-making process or decision quality. Additional work is needed to develop and evaluate measurement instruments and further explore theoretical issues to advance future research on PtDA effectiveness. PMID:24625035

Establishing the effectiveness of patient decision aids: key constructs and measurement instruments.

PubMed

Sepucha, Karen R; Borkhoff, Cornelia M; Lally, Joanne; Levin, Carrie A; Matlock, Daniel D; Ng, Chirk Jenn; Ropka, Mary E; Stacey, Dawn; Joseph-Williams, Natalie; Wills, Celia E; Thomson, Richard

2013-01-01

Establishing the effectiveness of patient decision aids (PtDA) requires evidence that PtDAs improve the quality of the decision-making process and the quality of the choice made, or decision quality. The aim of this paper is to review the theoretical and empirical evidence for PtDA effectiveness and discuss emerging practical and research issues in the measurement of effectiveness. This updated overview incorporates: a) an examination of the instruments used to measure five key decision-making process constructs (i.e., recognize decision, feel informed about options and outcomes, feel clear about goals and preferences, discuss goals and preferences with health care provider, and be involved in decisions) and decision quality constructs (i.e., knowledge, realistic expectations, values-choice agreement) within the 86 trials in the Cochrane review; and b) a summary of the 2011 Cochrane Collaboration's review of PtDAs for these key constructs. Data on the constructs and instruments used were extracted independently by two authors from the 86 trials and any disagreements were resolved by discussion, with adjudication by a third party where required. The 86 studies provide considerable evidence that PtDAs improve the decision-making process and decision quality. A majority of the studies (76/86; 88%) measured at least one of the key decision-making process or decision quality constructs. Seventeen different measurement instruments were used to measure decision-making process constructs, but no single instrument covered all five constructs. The Decisional Conflict Scale was most commonly used (n = 47), followed by the Control Preference Scale (n = 9). Many studies reported one or more constructs of decision quality, including knowledge (n = 59), realistic expectation of risks and benefits (n = 21), and values-choice agreement (n = 13). There was considerable variability in how values-choice agreement was defined and determined. No study reported on all key decision-making process and decision quality constructs. Evidence of PtDA effectiveness in improving the quality of the decision-making process and decision quality is strong and growing. There is not, however, consensus or standardization of measurement for either the decision-making process or decision quality. Additional work is needed to develop and evaluate measurement instruments and further explore theoretical issues to advance future research on PtDA effectiveness.

30 CFR 75.335 - Seal strengths, design applications, and installation.

Code of Federal Regulations, 2013 CFR

2013-07-01

... properties, construction specifications, quality control, design references, and other information related to... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Seal strengths, design applications, and... Seal strengths, design applications, and installation. (a) Seal strengths. Seals constructed on or...

30 CFR 75.335 - Seal strengths, design applications, and installation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... properties, construction specifications, quality control, design references, and other information related to... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Seal strengths, design applications, and... Seal strengths, design applications, and installation. (a) Seal strengths. Seals constructed on or...

30 CFR 75.335 - Seal strengths, design applications, and installation.

Code of Federal Regulations, 2014 CFR

2014-07-01

... properties, construction specifications, quality control, design references, and other information related to... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Seal strengths, design applications, and... Seal strengths, design applications, and installation. (a) Seal strengths. Seals constructed on or...

30 CFR 75.335 - Seal strengths, design applications, and installation.

Code of Federal Regulations, 2012 CFR

2012-07-01

... properties, construction specifications, quality control, design references, and other information related to... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Seal strengths, design applications, and... Seal strengths, design applications, and installation. (a) Seal strengths. Seals constructed on or...

30 CFR 75.335 - Seal strengths, design applications, and installation.

Code of Federal Regulations, 2011 CFR

2011-07-01

... properties, construction specifications, quality control, design references, and other information related to... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Seal strengths, design applications, and... Seal strengths, design applications, and installation. (a) Seal strengths. Seals constructed on or...

Event-based design tool for construction site erosion and sediment controls

NASA Astrophysics Data System (ADS)

Trenouth, William R.; Gharabaghi, Bahram

2015-09-01

This paper provides additional discussion surrounding the novel event-based soil loss models developed by Trenouth and Gharabaghi (2015) for the design of erosion and sediment controls (ESCs) for various phases of construction - from pre-development to post-development conditions. The datasets for the study were obtained from three Ontario sites - Greensborough, Cookstown, and Alcona - in addition to datasets mined from the literature for three additional sites - Treynor, Iowa, Coshocton, Ohio and Cordoba, Spain. Model performances were evaluated for each of the study sites, and quantified using commonly-reported statistics. This work is nested within a broader conceptual framework, which includes the estimation of ambient receiving water quality, the prediction of event mean runoff quality for a given design storm, and the calculation of the required level of protection using adequate ESCs to meet receiving water quality guidelines. These models allow design engineers and regulatory agencies to assess the potential risk of ecological damage to receiving waters due to inadequate soil erosion and sediment control practices using dynamic scenario forecasting when considering rapidly changing land use conditions during various phases of construction, typically for a 2- or 5-year design storm return period.

Quality Control of the Print with the Application of Statistical Methods

NASA Astrophysics Data System (ADS)

Simonenko, K. V.; Bulatova, G. S.; Antropova, L. B.; Varepo, L. G.

2018-04-01

The basis for standardizing the process of offset printing is the control of print quality indicators. The solution of this problem has various approaches, among which the most important are statistical methods. Practical implementation of them for managing the quality of the printing process is very relevant and is reflected in this paper. The possibility of using the method of constructing a Control Card to identify the reasons for the deviation of the optical density for a triad of inks in offset printing is shown.

Utilization of building information modeling in infrastructure’s design and construction

NASA Astrophysics Data System (ADS)

Zak, Josef; Macadam, Helen

2017-09-01

Building Information Modeling (BIM) is a concept that has gained its place in the design, construction and maintenance of buildings in Czech Republic during recent years. This paper deals with description of usage, applications and potential benefits and disadvantages connected with implementation of BIM principles in the preparation and construction of infrastructure projects. Part of the paper describes the status of BIM implementation in Czech Republic, and there is a review of several virtual design and construction practices in Czech Republic. Examples of best practice are presented from current infrastructure projects. The paper further summarizes experiences with new technologies gained from the application of BIM related workflows. The focus is on the BIM model utilization for the machine control systems on site, quality assurance, quality management and construction management.

Controlled dehydration improves the diffraction quality of two RNA crystals.

PubMed

Park, HaJeung; Tran, Tuan; Lee, Jun Hyuck; Park, Hyun; Disney, Matthew D

2016-11-03

Post-crystallization dehydration methods, applying either vapor diffusion or humidity control devices, have been widely used to improve the diffraction quality of protein crystals. Despite the fact that RNA crystals tend to diffract poorly, there is a dearth of reports on the application of dehydration methods to improve the diffraction quality of RNA crystals. We use dehydration techniques with a Free Mounting System (FMS, a humidity control device) to recover the poor diffraction quality of RNA crystals. These approaches were applied to RNA constructs that model various RNA-mediated repeat expansion disorders. The method we describe herein could serve as a general tool to improve diffraction quality of RNA crystals to facilitate structure determinations.

Quality of mass-reared codling moth (Lepidoptera: Tortricidae) after long distance transportation 1. Logistics of shipping procedures and quality parameters as measured in the laboratory.

USDA-ARS?s Scientific Manuscript database

The sterile insect technique is a proven effective control tactic against lepidopteran pests when applied in an area-wide integrated pest management programme. The construction of insect mass-rearing facilities requires considerable investment and moth control strategies that include the use of ster...

The Empirical Testing of a Musical Performance Assessment Paradigm

ERIC Educational Resources Information Center

Russell, Brian E.

2010-01-01

The purpose of this study was to test a hypothesized model of aurally perceived performer-controlled musical factors that influence assessments of performance quality. Previous research studies on musical performance constructs, musical achievement, musical expression, and scale construction were examined to identify the factors that influence…

Improvement of Base and Soil Construction Quality by Using Intelligent Compaction Technology : Final Report.

DOT National Transportation Integrated Search

2017-08-01

Intelligent Compaction (IC) technique is a fast-developing technology for base and soil compaction quality control. Proof-rolling subgrades and bases using IC rollers upon completion of compaction can identify the less stiff spots and significantly i...

Develop nondestructive rapid pavement quality assurance/quality control evaluation test methods and supporting technology : project summary.

DOT National Transportation Integrated Search

2017-01-01

The findings from the proof of concept with mechanics-based models for flexible base suggest additional validation work should be performed, draft construction specification frameworks should be developed, and work extending the technology to stabili...

Utilization of Light Detection and Ranging for Quality Control and Quality Assurance of Pavement Grades

DOT National Transportation Integrated Search

2018-02-01

Light Detection and Ranging (Lidar) technology is a useful tool that can assist transportation agencies during the design, construction, and maintenance phases of transportation projects. To demonstrate the utility of Lidar, this report discusses how...

Develop nondestructive rapid pavement quality Assurance/quality control evaluation test methods and supporting technology : project summary.

DOT National Transportation Integrated Search

2017-01-01

The findings from the proof of concept with mechanics-based models for flexible base suggest additional validation work should be performed, draft construction specification frameworks should be developed, and work extending the technology to stabili...

Qualifying Items of Work for End-Result Specifications: Phases I and II

DOT National Transportation Integrated Search

1998-12-01

The Texas Department of Transportation (TxDOT) is presently using a quality control/quality assurance specification for hot-mix asphalt concrete pavement. There is a strong interest in determining if other construction items can be converted to this ...

Construction of quality-assured infant feeding process of care data repositories: definition and design (Part 1).

PubMed

Garcí A-de-León-Chocano, Ricardo; Sáez, Carlos; Muñoz-Soler, Verónica; Garcí A-de-León-González, Ricardo; García-Gómez, Juan M

2015-12-01

This is the first paper of a series of two regarding the construction of data quality (DQ) assured repositories for the reuse of information on infant feeding from birth until two years old. This first paper justifies the need for such repositories and describes the design of a process to construct them from Electronic Health Records (EHR). As a result, Part 1 proposes a computational process to obtain quality-assured datasets represented by a canonical structure extracted from raw data from multiple EHR. For this, 13 steps were defined to ensure the harmonization, standardization, completion, de-duplication, and consistency of the dataset content. Moreover, the quality of the input and output data for each of these steps is controlled according to eight DQ dimensions: predictive value, correctness, duplication, consistency, completeness, contextualization, temporal-stability and spatial-stability. The second paper of the series will describe the application of this computational process to construct the first quality-assured repository for the reuse of information on infant feeding in the perinatal period aimed at the monitoring of clinical activities and research. Copyright © 2015 Elsevier Ltd. All rights reserved.

[Construction of NIRS-based total quality control system for compound Ejiao oral liquid and relative thinking].

PubMed

Zhang, Yan; Zhang, Lu; Tian, Shou-Sheng; Zhou, Xiang-Shan; Li, Wen-Long; Qu, Hai-Bin

2016-10-01

In this paper, near infrared spectroscopy (NIRS)-based total quality control system of compound Ejiao oral liquid is introduced briefly, including the quality control of raw traditional Chinese medicine (TCM) materials, monitoring and control of the extract and the alkaline precipitation technics, and also the inspection of finished products in both open bottle and non-opening modes. By analyzing and summing up the significance and difficulties, several important problems in the practical applications of NIRS technology are proposed, which will provide references for the similar studies of other TCM products. Copyright© by the Chinese Pharmaceutical Association.

Psychosocial constructs were not mediators of intervention effects for dietary and physical activity outcomes in a church-based lifestyle intervention: Delta Body and Soul III.

PubMed

Thomson, Jessica L; Tussing-Humphreys, Lisa M; Zoellner, Jamie M; Goodman, Melissa H

2016-08-01

Evaluating an intervention's theoretical basis can inform design modifications to produce more effective interventions. Hence the present study's purpose was to determine if effects from a multicomponent lifestyle intervention were mediated by changes in the psychosocial constructs decisional balance, self-efficacy and social support. Delta Body and Soul III, conducted from August 2011 to May 2012, was a 6-month, church-based, lifestyle intervention designed to improve diet quality and increase physical activity. Primary outcomes, diet quality and aerobic and strength/flexibility physical activity, as well as psychosocial constructs, were assessed via self-report, interviewer-administered surveys at baseline and post intervention. Mediation analyses were conducted using ordinary least squares (continuous outcomes) and maximum likelihood logistic (dichotomous outcomes) regression path analysis. Churches (five intervention and three control) were recruited from four counties in the Lower Mississippi Delta region of the USA. Rural, Southern, primarily African-American adults (n 321). Based upon results from the multiple mediation models, there was no evidence that treatment (intervention v. control) indirectly influenced changes in diet quality or physical activity through its effects on decisional balance, self-efficacy and social support. However, there was evidence for direct effects of social support for exercise on physical activity and of self-efficacy for sugar-sweetened beverages on diet quality. Results do not support the hypothesis that the psychosocial constructs decisional balance, self-efficacy and social support were the theoretical mechanisms by which the Delta Body and Soul III intervention influenced changes in diet quality and physical activity.

New types of dwellings for prospective construction after 1981. [in the Soviet Union

NASA Technical Reports Server (NTRS)

Butuzov, V.; Kapustyan, Y.

1977-01-01

Architectural considerations for the next stage of mass housing construction in the U.S.S.R. are explored. The architects are concerned with both the aesthetic and functional quality of the constructions, in terms of the prospective inhabitants as well as the environments in which they will be located. Experimental building designs emphasize: variety of appearance, environmental control, and the communal life.

Study on strength estimation of soil cement used in the embedded pile method by electrical resistivity measurement

NASA Astrophysics Data System (ADS)

Mochida, Y.; Sakurai, Y.; Indra, H.; Karimi, A. L.

2017-11-01

Problems caused by poor quality control and quality assurance of the pre-boring embedded pile construction, such as on domestic apartment house is still occurring nowadays. An adequate consideration for invisible risks inside or below the ground is important in pile foundation construction therefore the demand for advanced and reliable quality assurance is increase in the future. In this research, to understand the quality of the construction at early stage, the compressive strength of cement-soil mixture of pile construction after 28 days is estimated using electrical resistivity value of the mixture. More accurate measurement for electrical resistivity value is conducted by inserting the electrodes without using potassium chloride solution as a catalyst. The result showed that there is a certain tendency in the electric resistivity value at the early age regarding to the type of soil (sand, clay) mixed in. The most accurate estimation was achieved from the electric resistivity value at the first day and several days onwards, and from the compressive strength after 3 days.

Design, analysis, and interpretation of field quality-control data for water-sampling projects

USGS Publications Warehouse

Mueller, David K.; Schertz, Terry L.; Martin, Jeffrey D.; Sandstrom, Mark W.

2015-01-01

The report provides extensive information about statistical methods used to analyze quality-control data in order to estimate potential bias and variability in environmental data. These methods include construction of confidence intervals on various statistical measures, such as the mean, percentiles and percentages, and standard deviation. The methods are used to compare quality-control results with the larger set of environmental data in order to determine whether the effects of bias and variability might interfere with interpretation of these data. Examples from published reports are presented to illustrate how the methods are applied, how bias and variability are reported, and how the interpretation of environmental data can be qualified based on the quality-control analysis.

The raft foundation reinforcement construction technology of Hongyun Building B tower

NASA Astrophysics Data System (ADS)

Liu, Yu; Yin, Suhua; Wu, Yanli; Zhao, Ying

2017-08-01

The foundation of Hongyun building B tower is made of raft board foundation which is 3300mm in the thickness include four kinds of reinforcement Φ32, Φ28, Φ12 and 12 steel grade two, in respective. It is researched that the raft foundation mass concrete construction technology is expatiated from temperature and cracks of the raft foundation and the temperature control and monitoring of the concrete base slab construction and concrete curing. According to the characteristics with large volume and thickness of the engineering of raft foundation, the construction of the reinforced force was calculated and the quality control measures were used to the reinforcement binding and connection, so it is success that Hongyun Building B tower raft foundation reinforced construction.

On-Site Construction Productivity Improvement Through Total Quality Management

DTIC Science & Technology

1991-12-01

morale of the work force. i Kaoru Ishikawa , Guide to Ouality Control, (2d ed; New York: Asian Productivity Organization, 1982), p. 45. ’"Ibid. 34...Curve Kaoru Ishikawa , Guide to Quality Control, (2d ed; New York: Asian Productivity Organization, 1982), p. 62. 54 For any normal distribution, 99.73...KAIZEN The Key to Japan’s Comoetitive Success. New York: Random House Business Division, 1986. Ishikawa , Kaoru , Guide to Ouality Control. 2d ed; New

Portable and wide-range solid-state transmission densitometer for quality control in film radiography

PubMed Central

Aramburo, Javier Morales; Gonzalez, Sigifredo Solano; Toledo, Jorge Toledo

2010-01-01

In biology, materials science, radiography quality control or film dosimetry in radiotherapy, a transmission densitometer is useful for measurements of optical density. The design proposed here is oriented to quality control in radiographic films. The instrument described here utilizes low-cost solid-state devices and is easy to construct. The use of 1-watt white light-emitting diode in this densitometer enables low power consumption and a cold light source. Moreover, the instrument does not need a reference light, which results in decreasing the number of parts and reducing the overall size of the apparatus. PMID:20927222

User's guide: estimation of key PCC, base, subbase, and pavement engineering properties from routine tests and physical characteristics

DOT National Transportation Integrated Search

2012-08-01

Material characterization is a critical component of modern day pavement analysis, design, construction, quality : control/quality assurance, management, and rehabilitation. At each stage during the life of a project, the influence of : several funda...

Embankment quality and assessment of moisture control implementation : tech transfer summary.

DOT National Transportation Integrated Search

2016-02-01

The motivation for this project was based on work by : Iowa State University (ISU) researchers at a few recent : grading projects that demonstrated embankments were : being constructed outside moisture control limits, even : though the contractor QC ...

Airfield construction (3rd revised and enlarged edition)

NASA Astrophysics Data System (ADS)

Goretskii, Leonid I.; Boguslavskii, Adol'f. M.; Serebrenikov, Vadim A.; Barzdo, V. I.; Leshchitskaia, T. P.; Polosin-Nikitin, S. M.

The principal engineering aspects of airfield construction are discussed. In particular, attention is given to the fundamental principles and organizational aspects of airfield construction; excavation work and airfield layout; construction of drainage systems; foundations and pavements; and quality control and safety engineering. The discussion also covers the operation of various support plants, including concrete production and mixing, production of asphalt-concrete mixtures and organic binders, production of structural steel and reinforced concrete components, and operation of stone quarries and gravel pits.

Environmental Assessment for Clean and Stabilize Ditches at the Golf Course and C Street

DTIC Science & Technology

2003-08-01

proposed action would require the disturbance of installation property, minimal decrease in storm water quality during the cleaning and a temporary...increase in noise levels during construction. Storm water quality would improve following the cleaning and stabilization. Erosion and sediment controls

Use of NDT equipment for construction quality control of hot mix asphalt pavements

DOT National Transportation Integrated Search

2006-08-01

The focus of the study has been to evaluate the utility of seismic methods in the quality management of the hot mix asphalt layers. Procedures are presented to measure the target field moduli of hot mix asphalt (HMA) with laboratory seismic methods, ...

Performance-based quality assurance/quality control (QA/QC) acceptance procedures for in-place soil testing phase 3 : [summary].

DOT National Transportation Integrated Search

2015-01-01

Acceptance of earthwork construction by the Florida Department of Transportation (FDOT) : requires in-place testing conducted with a nuclear density gauge (NDG) to determine : dry density, which must obtain a required percent compaction based upon a ...

Quality control/quality assurance testing for joint density and segregation of asphalt mixtures : tech transfer summary.

DOT National Transportation Integrated Search

2013-04-01

A longitudinal joint is the interface between two adjacent and parallel hot-mix asphalt (HMA) mats. Inadequate joint construction can lead to a location where water can penetrate the pavement layers and reduce the structural support of the underlying...

Construction of Genetically Engineered Streptococcus gordonii Strains to Provide Control in QPCR Assays for Assessing Microbiological Quality in Recreational Water.

EPA Science Inventory

Quantitative PCR (QPCR) methods for beach monitoring by estimating abundance of Enterococcus spp. in recreational waters use internal, positive controls which address only the amplification of target DNA. In this study two internal, positive controls were developed to control for...

Quality Dashboards: Technical and Architectural Considerations of an Actionable Reporting Tool for Population Management

PubMed Central

Olsha-Yehiav, Maya; Einbinder, Jonathan S.; Jung, Eunice; Linder, Jeffrey A.; Greim, Julie; Li, Qi; Schnipper, Jeffrey L.; Middleton, Blackford

2006-01-01

Quality Dashboards (QD) is a condition-specific, actionable web-based application for quality reporting and population management that is integrated into the Electronic Health Record (EHR). Using server-based graphic web controls in a .Net environment to construct Quality Dashboards allows customization of the reporting tool without the need to rely on commercial business intelligence tool. Quality Dashboards will improve patient care and quality outcomes as clinicians utilize the reporting tool for population management. PMID:17238671

Response of benthic macroinvertebrate communities to highway construction in an Appalachian watershed

USGS Publications Warehouse

Hedrick, Lara B.; Welsh, S.A.; Anderson, James T.; Lin, L.-S.; Chen, Y.; Wei, X.

2010-01-01

Highway construction in mountainous areas can result in sedimentation of streams, negatively impacting stream habitat, water quality, and biotic communities. We assessed the impacts of construction of a segment of Corridor H, a four-lane highway, in the Lost River watershed, West Virginia, by monitoring benthic macroinvertebrate communities and water quality, before, during, and after highway construction and prior to highway use at upstream and downstream sites from 1997 through 2007. Data analysis of temporal impacts of highway construction followed a Before-After-Control-Impact (BACI) study design. Highway construction impacts included an increase in stream sedimentation during the construction phase. This was indicated by an increase in turbidity and total suspended solids. Benthic macroinvertebrate metrics indicated a community more tolerant during and after construction than in the period before construction. The percent of Chironomidae and the Hilsenhoff Biotic Index (HBI) increased, while percent of Ephemeroptera, Plecoptera, and Trichoptera (EPT) decreased. Our 10-year study addressed short-term impacts of highway construction and found that impacts were relatively minimal. A recovery of the number of EPT taxa collected after construction indicated that the benthic macroinvertebrate community may be recovering from impacts of highway construction. However, this study only addressed a period of 3 years before, 3 years during, and 4 years post construction. Inferences cannot be made concerning the long-term impacts of the highway, highway traffic, runoff, and other factors associated with highway use. Continual monitoring of the watershed is necessary to determine if the highway has a continual impact on stream habitat, water quality, and biotic integrity. ?? 2010 Springer Science+Business Media B.V.

Recommendations for constructing forest stream crossings to control soil losses

Treesearch

Pamela J. Edwards; Jingxin Wang; Joshua T. Stedman

2009-01-01

Stream water samples were collected once daily and throughout storms from a small forested watershed in north central West Virginia for approximately 8 years. The turbidities of the samples were measured to determine how water quality changed in response to the construction of three associated stream crossings. The influence of the...

Classification Trees for Quality Control Processes in Automated Constructed Response Scoring.

ERIC Educational Resources Information Center

Williamson, David M.; Hone, Anne S.; Miller, Susan; Bejar, Isaac I.

As the automated scoring of constructed responses reaches operational status, the issue of monitoring the scoring process becomes a primary concern, particularly when the goal is to have automated scoring operate completely unassisted by humans. Using a vignette from the Architectural Registration Examination and data for 326 cases with both human…

Process-based quality for thermal spray via feedback control

NASA Astrophysics Data System (ADS)

Dykhuizen, R. C.; Neiser, R. A.

2006-09-01

Quality control of a thermal spray system manufacturing process is difficult due to the many input variables that need to be controlled. Great care must be taken to ensure that the process remains constant to obtain a consistent quality of the parts. Control is greatly complicated by the fact that measurement of particle velocities and temperatures is a noisy stochastic process. This article illustrates the application of quality control concepts to a wire flame spray process. A central feature of the real-time control system is an automatic feedback control scheme that provides fine adjustments to ensure that uncontrolled variations are accommodated. It is shown how the control vectors can be constructed from simple process maps to independently control particle velocity and temperature. This control scheme is shown to perform well in a real production environment. We also demonstrate that slight variations in the feed wire curvature can greatly influence the process. Finally, the geometry of the spray system and sensor must remain constant for the best reproducibility.

Proceedings of the Acquisition Research Symposium: Imagnination, Innovation, and Implementation, 1991. Volume 1.

DTIC Science & Technology

1991-01-01

Construction Industry Institute, Austin, Texas, April 1990. 6. Ishikawa , Kaoru , What is Total Quality Control? The Japanese Way, Prentice-Hall, N.J., 1985. 7...customer. Ishikawa , a leading Japanese management and line personnel, and where authority on quality management, claims that appropriate, the customer

40 CFR 130.0 - Program summary and purpose.

Code of Federal Regulations, 2011 CFR

2011-07-01

... management decisions which are necessary to control specific sources of pollution. The plans recommend..., 205(j), non-construction management 205(g), 208, 303 and 305 of the Clean Water Act. The Water Quality... the chemical, physical and biological data needed to determine the present quality of a State's waters...

Quality transitivity and traceability system of herbal medicine products based on quality markers.

PubMed

Liu, Changxiao; Guo, De-An; Liu, Liang

2018-05-15

Due to a variety of factors to affect the herb quality, the existing quality management model is unable to evaluate the process control. The development of the concept of "quality marker" (Q-marker) lays basis for establishing an independent process quality control system for herbal products. To ensure the highest degree of safety, effectiveness and quality process control of herbal products, it is aimed to establish a quality transitivity and traceability system of quality and process control from raw materials to finished herbal products. Based on the key issues and challenges of quality assessment, the current status of quality and process controls from raw materials to herbal medicinal products listed in Pharmacopoeia were analyzed and the research models including discovery and identification of Q-markers, analysis and quality management of risk evaluation were designed. Authors introduced a few new technologies and methodologies, such as DNA barcoding, chromatographic technologies, fingerprint analysis, chemical markers, bio-responses, risk management and solution for quality process control. The quality and process control models for herbal medicinal products were proposed and the transitivity and traceability system from raw materials to the finished products was constructed to improve the herbal quality from the entire supply and production chain. The transitivity and traceability system has been established based on quality markers, especially on how to control the production process under Good Engineering Practices, as well as to implement the risk management for quality and process control in herbal medicine production. Copyright © 2018 Elsevier GmbH. All rights reserved.

[Application of bioassay in quality control of Chinese materia medica-taking Radix Isatidis as an example].

PubMed

Yan, Dan; Ren, Yongshen; Luo, Jiaoyang; Li, Hanbing; Feng, Xue; Xiao, Xiaohe

2010-10-01

Bioassay, which construct the characteristics consistents with Chinese medical science, is the core mode and methods for the quality control of Chinese materia medica. Taking the bioassay of Radix Isatidis as an example, the contribution, status and application of bioassay in the quality control of Chinese materia medica were introduced in this article, and two key issue (the selection of reference and measurement methods) in the process of establishing bioassay were also explained. This article expects to provide a reference for the development and improvement of the bioassay of Chinese materia medica in a practical manipulation level.

Identification of Ways to Improve Military Construction for Energy-Efficient Facilities.

DTIC Science & Technology

1987-12-01

inservice . Thus, it is necessary to control techniques, materials, and equip- S ment as part of the Military Construction, Army (MCA) process to ensure...Moreover, USACE often lacks proper test equipment and trained personnel at many construction sites. The 0 result is that acceptance testing often is...on a few diagnostic procedures. USACE quality assurance inspectors would be trained to do the tests. .-. Objectives 0 The overall objective of this

Anthropometric standardisation and quality control protocols for the construction of new, international, fetal and newborn growth standards: the INTERGROWTH-21st Project.

PubMed

Cheikh Ismail, L; Knight, H E; Ohuma, E O; Hoch, L; Chumlea, W C

2013-09-01

The primary aim of the INTERGROWTH-21(st) Project is to construct new, prescriptive standards describing optimal fetal and preterm postnatal growth. The anthropometric measurements include the head circumference, recumbent length and weight of the infants, and the stature and weight of the parents. In such a large, international, multicentre project, it is critical that all study sites follow standardised protocols to ensure maximal validity of the growth and nutrition indicators used. This paper describes in detail the anthropometric training, standardisation and quality control procedures used to collect data for these new standards. The initial standardisation session was in Nairobi, Kenya, using newborns, which was followed by similar sessions in the eight participating study sites in Brazil, China, India, Italy, Kenya, Oman, UK and USA. The intraobserver and inter-observer technical error of measurement values for head circumference range from 0.3 to 0.4 cm, and for recumbent length from 0.3 to 0.5 cm. These standardisation protocols implemented at each study site worldwide ensure that the anthropometric data collected are of the highest quality to construct international growth standards. © 2013 Royal College of Obstetricians and Gynaecologists.

Dynamic Simulation on the Installation Process of HGIS in Transformer Substation

NASA Astrophysics Data System (ADS)

Lin, Tao; Li, Shaohua; Wang, Hu; Che, Deyong; Qi, Guangcai; Yao, Jianfeng; Zhang, Qingzhe

The technological requirements of Hypid Gas Insulated Switchgear (HGIS) installation in transformer substation is high and the control points of quality is excessive. Most of the engineers and technicians in the construction enterprises are not familiar with equipments of HGIS. In order to solve these problem, equipments of HGIS is modeled on the computer by SolidWorks software. Installation process of civil foundation and closed-type equipments is optimized dynamically with virtual assemble technology. Announcements and application work are composited into animation file. Skills of modeling and simulation is tidied classify as well. The result of the visual dynamic simulation can instruct the actual construction process of HGIS to a certain degree and can promote reasonable construction planning and management. It can also improve the method and quality of staff training for electric power construction enterprises.

Design of Road Pavement Using Recycled Aggregate

NASA Astrophysics Data System (ADS)

Remišová, Eva; Decký, Martin; Mikolaš, Milan; Hájek, Matej; Kovalčík, Luboš; Mečár, Martin

2016-10-01

The presented article gives special attention to codified clauses of the road construction law, the relevant clauses of the standards and technical regulations to design and control the quality of recycled aggregate constructions. The article also presents the authors’ suggestions to design of earth constructions and pavements of roads according to the Slovak technical standards, technical regulations and objectively determined results of research and development of road infrastructure. The article presents a comparison of the mechanical characteristics measurements of the structural layers of road pavements built from the recycled and natural aggregate. It also presents correlation functions of results obtained from in situ and in laboratory CBR (Californian Bearing Ratio) measuring, representing the world's most widely used control method of bearing capacity of mentioned construction layers.

[A strategy of constructing the technological system for quality control of Chinese medicine based on process control and management].

PubMed

Cheng, Yi-Yu; Qian, Zhong-Zhi; Zhang, Bo-Li

2017-01-01

The current situation, bottleneck problems and severe challenges in quality control technology of Chinese Medicine (CM) are briefly described. It is presented to change the phenomenon related to the post-test as the main means and contempt for process control in drug regulation, reverse the situation of neglecting the development of process control and management technology for pharmaceutical manufacture and reconstruct the technological system for quality control of CM products. The regulation and technology system based on process control and management for controlling CM quality should be established to solve weighty realistic problems of CM industry from the root causes, including backwardness of quality control technology, weakness of quality risk control measures, poor reputation of product quality and so on. By this way, the obstacles from poor controllability of CM product quality could be broken. Concentrating on those difficult problems and weak links in the technical field of CM quality control, it is proposed to build CMC (Chemistry, Manufacturing and Controls) regulation for CM products with Chinese characteristics and promote the regulation international recognition as soon as possible. The CMC technical framework, which is clinical efficacy-oriented, manufacturing manner-centered and process control-focused, was designed. To address the clinical characteristics of traditional Chinese medicine (TCM) and the production feature of CM manufacture, it is suggested to establish quality control engineering for CM manufacturing by integrating pharmaceutical analysis, TCM chemistry, TCM pharmacology, pharmaceutical engineering, control engineering, management engineering and other disciplines. Further, a theoretical model of quality control engineering for CM manufacturing and the methodology of digital pharmaceutical engineering are proposed. A technology pathway for promoting CM standard and realizing the strategic goal of CM internationalization is elaborated. Copyright© by the Chinese Pharmaceutical Association.

[Construction and operation status of management system of laboratories of schistosomiasis control institutions in Hubei Province].

PubMed

Zhao-Hui, Zheng; Jun, Qin; Li, Chen; Hong, Zhu; Li, Tang; Zu-Wu, Tu; Ming-Xing, Zeng; Qian, Sun; Shun-Xiang, Cai

2016-10-09

To analyze the construction and operation status of management system of laboratories of schistosomiasis control institutions in Hubei Province, so as to provide the reference for the standardized detection and management of schistosomiasis laboratories. According to the laboratory standard of schistosomiasis at provincial, municipal and county levels, the management system construction and operation status of 60 schistosomiasis control institutions was assessed by the acceptance examination method from 2013 to 2015. The management system was already occupied over all the laboratories of schistosomiasis control institutions and was officially running. There were 588 non-conformities and the inconsistency rate was 19.60%. The non-conformity rate of the management system of laboratory quality control was 38.10% (224 cases) and the non-conformity rate of requirements of instrument and equipment was 23.81% (140 cases). The management system has played an important role in the standardized management of schistosomiasis laboratories.

76 FR 54730 - Rubicon Trail Easement, Eldorado National Forest, Pacific Ranger District

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-02

... erosion control feature as described in the Rubicon Trail Saturated Soil Water Quality Protection Plan (El..., OHV users also drive the trail when it is covered by snow and at times when saturated soil conditions... the Saturated Soil Water Quality Protection Plan would be constructed from Little Sluice to the County...

40 CFR 63.43 - Maximum achievable control technology (MACT) determinations for constructed and reconstructed...

Code of Federal Regulations, 2012 CFR

2012-07-01

... achieving such emission reduction and any non-air quality health and environmental impacts and energy..., and analysis of cost and non-air quality health environmental impacts or energy requirements for the...-day period for submittal of public comment; and (iii) A notice by prominent advertisement in the area...

40 CFR 63.43 - Maximum achievable control technology (MACT) determinations for constructed and reconstructed...

Code of Federal Regulations, 2014 CFR

2014-07-01

... achieving such emission reduction and any non-air quality health and environmental impacts and energy..., and analysis of cost and non-air quality health environmental impacts or energy requirements for the...-day period for submittal of public comment; and (iii) A notice by prominent advertisement in the area...

40 CFR 63.43 - Maximum achievable control technology (MACT) determinations for constructed and reconstructed...

Code of Federal Regulations, 2013 CFR

2013-07-01

... achieving such emission reduction and any non-air quality health and environmental impacts and energy..., and analysis of cost and non-air quality health environmental impacts or energy requirements for the...-day period for submittal of public comment; and (iii) A notice by prominent advertisement in the area...

Solidarity-conflict and ambivalence: testing two conceptual frameworks and their impact on quality of life for older family members.

PubMed

Lowenstein, Ariela

2007-03-01

The purpose of this study was to test empirically two major conceptualizations of parent-child relations in later adulthood-intergenerational solidarity-conflict and ambivalence paradigms-and their predictive validity on elders' quality of life using comparative cross-national data. Data were from a sample of 2,064 elders (aged 75 and older) from the five-country OASIS study (Old Age and Autonomy: The Role of Service Systems and Intergenerational Family Solidarity; Norway, England, Germany, Spain, and Israel). Multivariate and block-recursive regression models estimated the predictivity of the two conceptualizations of family dynamics on quality of life controlling for country, personal characteristics, and activity of daily living functioning. Descriptive analyses indicated that family solidarity, especially the affective/cognitive component (called Solidarity A), was high in all five countries, whereas conflict and ambivalence were low. When I entered all three constructs into the regression Solidarity A, reciprocal intergenerational support and ambivalence predicted quality of life. Controlling for activity of daily living functioning, socioeconomics status, and country, intergenerational relations had only a weak explanatory power, and personal resources explained most of the variance. The data suggest that the three constructs exist simultaneously but in varying combinations, confirming that in cross-cultural contexts family cohesion predominates, albeit with low degrees of conflict and ambivalence. The solidarity construct evidenced relatively robust measurement. More work is required to enhance the ambivalence measurement.

Problems and solutions in the field of improving control and supervision activities in the construction sector

NASA Astrophysics Data System (ADS)

Dikareva, Varvara; Mostovaya, Anna

2018-03-01

The improvement of control and supervision activities in high-rise construction is an important goal of the state. In the paper, the author considered the initiatives of the state in terms of improving the control activity. He shows the main approaches that will be applied by the state. The application of information and communication technologies in control activities is described in detail. It was noted that the quality of the regulation of various procedures remains a serious issue. At the same time, modern innovations in the field of control should take into account the increasing volumes of data and information about various economic processes.

Paper 5643 - Role of Maintenance in the Performance of Stormwater Control Measures

NASA Astrophysics Data System (ADS)

Hunt, W. F., III; Merriman, L.; Winston, R.; Brown, R. A.

2014-12-01

Stormwater Control Measures are required by jurisdictions across the USA and internationally to treat runoff quantity and quality. Like any anthropogenic device, these systems must be maintained. However, often times once a system has been constructed, it is neglected, either assumed it will work in perpetuity or (more likely) just forgotten. Recent research on multiple stormwater practices illustrates the pitfalls of neglecting certain practices, while highlighting other SCMs that are resilient despite lack of care. The focus of this presentation will be to highlight three often-used SCMs, constructed stormwater wetlands, bioretention, and permeable pavement, describing each SCM's failure modes. The degree to which water quality and hydrologic mitigation function is lost will be presented for each practice. Moreover, design and construction guidance will be provided so that the exposure to failure mechanisms is limited for each practice. Of the three practices, it appears that their resilience to failure is (in descending order): constructed stormwater wetlands, bioretention, and permeable pavement. One key to the former two practices robustness seems to be the important role in vegetation, which helps heal "wounds" of neglect. Because constructed stormwater wetlands do not rely upon filtration, they tend to be slighly less prone to failure than bioretention (which is a filtration-based SCM).

[Investigation on production process quality control of traditional Chinese medicine--Banlangen granule as an example].

PubMed

Tan, Manrong; Yan, Dan; Qiu, Lingling; Chen, Longhu; Yan, Yan; Jin, Cheng; Li, Hanbing; Xiao, Xiaohe

2012-04-01

For the quality management system of herbal medicines, intermediate and finished products it exists the " short board" effect of methodologies. Based on the concept of process control, new strategies and new methods of the production process quality control had been established with the consideration of the actual production of traditional Chinese medicine an the characteristics of Chinese medicine. Taking Banlangen granule as a practice example, which was effective and widespread application, character identification, determination of index components, chemical fingerprint and biometrics technology were sequentially used respectively to assess the quality of Banlangen herbal medicines, intermediate (water extraction and alcohol precipitation) and finished product. With the transfer rate of chemical information and biological potency as indicators, the effectiveness and transmission of the above different assessments and control methods had been researched. And ultimately, the process quality control methods of Banlangen granule, which were based on chemical composition analysis-biometric analysis, had been set up. It can not only validly solute the current status that there were many manufacturers varying quality of Banlangen granule, but also ensure and enhance its clinical efficacy. Furthermore it provided a foundation for the construction of the quality control of traditional Chinese medicine production process.

Total Quality Management in Construction

DTIC Science & Technology

1993-08-01

1989. I Ishikawa , Kaoru . Guide to Quality Control. White Plains, New York: Asian Productivity Organization, 1982. 5 Kelso, Frank B. II, Admiral...category are explored to determine the most significant causes which produce the effect. Figure 24 shows a typical cause-and effect diagram. Kaoru ... Ishikawa describes cause-and-effect diagrams as I an effective tool "to clearly illustrate the various causes I affecting quality by sorting out and relating

Flow Control and Design Assessment for Drainage System at McMurdo Station, Antarctica

DTIC Science & Technology

2014-11-24

Council BMP Best Management Practice CASQUA California Storm Water Quality Task Force CRREL Cold Regions Research and Engineering Laboratory DS...ponds The California Storm Water Quality Task Force (CASQUA 1993) defines a sediment basin as “a pond created by excavation or constructing an em...British Standards Institution. California Storm Water Quality Task Force (CASQUA). 1993. ESC41: Check Dams. In Stormwater Best Management Practices

Research on construction technology for orthotropic steel deck pavement of Haihe River Chunyi Bridge

NASA Astrophysics Data System (ADS)

Xue, Y. C.; Qian, Z. D.; Zhang, M.

2017-01-01

In order to ensure the good service quality of orthotropic steel deck pavement of Haihe River Chunyi Bridge in Tianjin, and to reduce the occurrence of pavement diseases like lateral and longitudinal cracks, the key working procedures such as steel deck cleaning, anticorrosive coating, bonding layer spraying, seam cutting, epoxy asphalt concrete’s mixing, transportation, paving and compaction were studied. The study was based on the main features of epoxy asphalt concrete which is the pavement materials of Haihe River Chunyi Bridge, and combined with the basic characteristics and construction conditions of Haihe River Chunyi Bridge. Furthermore, some processing measures like controlling time and temperature, continuous paving with two pavers, lateral feeding, and improving the compaction method were proposed. The project example shows that the processing measures can effectively solve the technical difficulties in the construction of orthotropic steel deck pavement of Haihe River Chunyi Bridge, can greatly improve the construction speed and quality, and can provide reference for the same kinds of orthotropic steel deck pavement construction.

[Quality by design approaches for pharmaceutical development and manufacturing of Chinese medicine].

PubMed

Xu, Bing; Shi, Xin-Yuan; Wu, Zhi-Sheng; Zhang, Yan-Ling; Wang, Yun; Qiao, Yan-Jiang

2017-03-01

The pharmaceutical quality was built by design, formed in the manufacturing process and improved during the product's lifecycle. Based on the comprehensive literature review of pharmaceutical quality by design (QbD), the essential ideas and implementation strategies of pharmaceutical QbD were interpreted. Considering the complex nature of Chinese medicine, the "4H" model was innovated and proposed for implementing QbD in pharmaceutical development and industrial manufacture of Chinese medicine product. "4H" corresponds to the acronym of holistic design, holistic information analysis, holistic quality control, and holistic process optimization, which is consistent with the holistic concept of Chinese medicine theory. The holistic design aims at constructing both the quality problem space from the patient requirement and the quality solution space from multidisciplinary knowledge. Holistic information analysis emphasizes understanding the quality pattern of Chinese medicine by integrating and mining multisource data and information at a relatively high level. The batch-to-batch quality consistence and manufacturing system reliability can be realized by comprehensive application of inspective quality control, statistical quality control, predictive quality control and intelligent quality control strategies. Holistic process optimization is to improve the product quality and process capability during the product lifecycle management. The implementation of QbD is useful to eliminate the ecosystem contradictions lying in the pharmaceutical development and manufacturing process of Chinese medicine product, and helps guarantee the cost effectiveness. Copyright© by the Chinese Pharmaceutical Association.

76 FR 42161 - Notice of Final Federal Agency Actions on Proposed Highway in California

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-18

... Gilman Drive; installation of new ramp meters; and, construction of a bicycle path along I-5. The project... at http://www.dot.ca.gov/dist11/envir.htm . Pending Federal actions include: 1. Section 401 Water Quality Certification from the San Diego Regional Water Quality Control Board (RWQCB), under Section 401...

Dahuk Rehabilitation Center. Dahuk, Iraq

DTIC Science & Technology

2007-01-08

this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services , Directorate for Information...construction services . As a result, it was very likely that the project would be successfully completed without major issues related to inadequate design...visit. Specifically, Quality Control and Quality Assurance personnel were well informed about the history and progression of the project and its

Active tuning of high-Q dielectric metasurfaces

DOE PAGES

Parry, Matthew; Komar, Andrei; Hopkins, Ben; ...

2017-08-02

Here, we demonstrate the active tuning of all-dielectric metasurfaces exhibiting high-quality factor (high-Q) resonances. The active control is provided by embedding the asymmetric silicon meta-atoms with liquid crystals, which allows the relative index of refraction to be controlled through heating. It is found that high quality factor resonances (Q = 270 ± 30) can be tuned over more than three resonance widths. Our results demonstrate the feasibility of using all-dielectric metasurfaces to construct tunable narrow-band filters.

Healthy Building Design for the Commercial, Industrial, and Institutional Marketplace.

ERIC Educational Resources Information Center

Turner, William A.

Building design and construction that helps deliver both superior air quality and occupant thermal comfort, while minimizing energy consumption, are examined. The paper explores an integrated building systems approach that combines the principles of "directed air flow control" and "demand controlled ventilation" where ventilation is effectively…

The key quality control technology of main cable erection in long-span suspension bridge construction

NASA Astrophysics Data System (ADS)

Chen, Yongrui; Wei, Wei; Dai, Jie

2017-04-01

Main cable is one of the most important structure of suspension Bridges, which bear all the dead and live load from upper structure. Cable erection is one of the most critical process in suspension bridge construction. Key points about strand erection are studied in this paper, including strand traction, lateral movement, section adjustment, placing into saddle, anchoring, line shape adjustment and keeping, and tension control. The technology has helped a long-span suspension bridge in Yunnan Province, China get a ideal finished state.

[The continuous graphic presentation of interdepartmental results (author's transl)].

PubMed

Berger, J; Hirsch, H

1976-10-01

The results of interdepartmental determinations can be clearly presented in the laboratory in two ways: 1. Entry on a test card, according to Shewhart, as used in internal quality control. 2. Entry on a test card, constructed on the principle of the Cusum test. By the latter procedure, systematic errors are detected sooner than with the usual test card. A graphic variant of the Cusum test is described; a V-mask is not required; the card superficially resembles the usual control card, and the calculation time is minimal. This method may also be used to advantage in internal quality control.

Application Research of Quality Control Technology of Asphalt Pavement based on GPS Intelligent

NASA Astrophysics Data System (ADS)

Wang, Min; Gao, Bo; Shang, Fei; Wang, Tao

2017-10-01

Due to the difficulty of steel deck pavement asphalt layer compaction caused by the effect of the flexible supporting system (orthotropic steel deck plate), it is usually hard and difficult to control for the site compactness to reach the design goal. The intelligent compaction technology is based on GPS control technology and real-time acquisition of actual compaction tracks, and then forms a cloud maps of compaction times, which guide the roller operator to do the compaction in accordance with the design requirement to ensure the deck compaction technology and compaction quality. From the actual construction situation of actual bridge and checked data, the intelligent compaction technology is significant in guaranteeing the steel deck asphalt pavement compactness and quality stability.

Sap flow sensors: construction, quality control and comparison.

PubMed

Davis, Tyler W; Kuo, Chen-Min; Liang, Xu; Yu, Pao-Shan

2012-01-01

This work provides a design for two types of sensors, based on the thermal dissipation and heat ratio methods of sap flow calculation, for moderate to large scale deployments for the purpose of monitoring tree transpiration. These designs include a procedure for making these sensors, a quality control method for the final products, and a complete list of components with vendors and pricing information. Both sensor designs were field tested alongside a commercial sap flow sensor to assess their performance and show the importance for quality controlling the sensor outputs. Results show that for roughly 2% of the cost of commercial sensors, self-made sap flow sensors can provide acceptable estimates of the sap flow measurements compared to the commercial sensors.

Guidelines for establishing and maintaining construction quality databases : tech brief.

DOT National Transportation Integrated Search

2006-12-01

Construction quality databases contain a variety of construction-related data that characterize the quality of materials and workmanship. The primary purpose of construction quality databases is to help State highway agencies (SHAs) assess the qualit...

Quality assurance and control in the production and static tests of the solid rocket boosters for the Space Shuttle

NASA Technical Reports Server (NTRS)

Cerny, O. F.

1979-01-01

The paper surveys the various aspects of design and overhaul of the solid rocket boosters. It is noted that quality control is an integral part of the design specifications. Attention is given to the production process which is optimized towards highest quality. Also discussed is the role of the DCA (Defense Contract Administration) in inspecting the products of subcontractors, noting that the USAF performs this role for prime contractors. Fabrication and construction of the booster is detailed with attention given to the lining of the booster cylinder and the mixing of the propellant and the subsequent X-ray inspection.

An analytic-numerical method for the construction of the reference law of operation for a class of mechanical controlled systems

NASA Astrophysics Data System (ADS)

Mizhidon, A. D.; Mizhidon, K. A.

2017-04-01

An analytic-numerical method for the construction of a reference law of operation for a class of dynamic systems describing vibrations in controlled mechanical systems is proposed. By the reference law of operation of a system, we mean a law of the system motion that satisfies all the requirements for the quality and design features of the system under permanent external disturbances. As disturbances, we consider polyharmonic functions with known amplitudes and frequencies of the harmonics but unknown initial phases. For constructing the reference law of motion, an auxiliary optimal control problem is solved in which the cost function depends on a weighting coefficient. The choice of the weighting coefficient ensures the design of the reference law. Theoretical foundations of the proposed method are given.

Albuquerque constructed wetlands pilot project: Summary and status of City of Albuquerque project, September 1995

Treesearch

Steven Glass; Joan Thullen; Jim Sartoris; Rick Roline

1996-01-01

The Pueblo of Isleta, located five miles downstream from Albuquerque, and the NM Water Quality Control Commission has established strict water quality standards for the Rio Grande, and it has become necessary for the Albuquerque Public Works Department to pursue methods to enhance the purity of treated municipal wastewater effluent produced at the Southside Water...

Characterizing air quality data from complex network perspective.

PubMed

Fan, Xinghua; Wang, Li; Xu, Huihui; Li, Shasha; Tian, Lixin

2016-02-01

Air quality depends mainly on changes in emission of pollutants and their precursors. Understanding its characteristics is the key to predicting and controlling air quality. In this study, complex networks were built to analyze topological characteristics of air quality data by correlation coefficient method. Firstly, PM2.5 (particulate matter with aerodynamic diameter less than 2.5 μm) indexes of eight monitoring sites in Beijing were selected as samples from January 2013 to December 2014. Secondly, the C-C method was applied to determine the structure of phase space. Points in the reconstructed phase space were considered to be nodes of the network mapped. Then, edges were determined by nodes having the correlation greater than a critical threshold. Three properties of the constructed networks, degree distribution, clustering coefficient, and modularity, were used to determine the optimal value of the critical threshold. Finally, by analyzing and comparing topological properties, we pointed out that similarities and difference in the constructed complex networks revealed influence factors and their different roles on real air quality system.

Research on the application of BIM technology in the whole life cycle of construction projects

NASA Astrophysics Data System (ADS)

Chang-liu, CHEN; Wei-wei, KOU; Shuai-hua, YE

2018-05-01

BIM technology can realize information sharing, and good BIM application will reduce the whole life cycle cost of construction projects. The popularization of BIM technology challenges the application of BIM technology at all stages of the whole life cycle of the construction project. It will give full play to the value of BIM, if developing a reasonable BIM project execution plan, defining BIM requirements, specifying Level of Development, determining the BIM quality control plan and clearing BIM application content of each stage, and will provide a unified method for project stakeholders, realize the whole life cycle of construction projects, and achieve the desired information sharing in construction project.

Validation of a proposal for evaluating hospital infection control programs.

PubMed

Silva, Cristiane Pavanello Rodrigues; Lacerda, Rúbia Aparecida

2011-02-01

To validate the construct and discriminant properties of a hospital infection prevention and control program. The program consisted of four indicators: technical-operational structure; operational prevention and control guidelines; epidemiological surveillance system; and prevention and control activities. These indicators, with previously validated content, were applied to 50 healthcare institutions in the city of São Paulo, Southeastern Brazil, in 2009. Descriptive statistics were used to characterize the hospitals and indicator scores, and Cronbach's α coefficient was used to evaluate the internal consistency. The discriminant validity was analyzed by comparing indicator scores between groups of hospitals: with versus without quality certification. The construct validity analysis was based on exploratory factor analysis with a tetrachoric correlation matrix. The indicators for the technical-operational structure and epidemiological surveillance presented almost 100% conformity in the whole sample. The indicators for the operational prevention and control guidelines and the prevention and control activities presented internal consistency ranging from 0.67 to 0.80. The discriminant validity of these indicators indicated higher and statistically significant mean conformity scores among the group of institutions with healthcare certification or accreditation processes. In the construct validation, two dimensions were identified for the operational prevention and control guidelines: recommendations for preventing hospital infection and recommendations for standardizing prophylaxis procedures, with good correlation between the analysis units that formed the guidelines. The same was found for the prevention and control activities: interfaces with treatment units and support units were identified. Validation of the measurement properties of the hospital infection prevention and control program indicators made it possible to develop a tool for evaluating these programs in an ethical and scientific manner in order to obtain a quality diagnosis in this field.

30 CFR 75.337 - Construction and repair of seals.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 days of completion of quality control tests. (f) Welding, cutting, and soldering. Welding, cutting, and soldering with an arc or flame are prohibited within 150 feet of a seal. An operator may request a...

30 CFR 75.337 - Construction and repair of seals.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 days of completion of quality control tests. (f) Welding, cutting, and soldering. Welding, cutting, and soldering with an arc or flame are prohibited within 150 feet of a seal. An operator may request a...

30 CFR 75.337 - Construction and repair of seals.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 days of completion of quality control tests. (f) Welding, cutting, and soldering. Welding, cutting, and soldering with an arc or flame are prohibited within 150 feet of a seal. An operator may request a...

Computerization of material test data reporting system : interim report.

DOT National Transportation Integrated Search

1973-09-01

This study was initiated to provide an integrated system of reporting, storing, and retrieving of construction and material test data using computerized (storage-retrieval) and quality control techniques. The findings reported in this interim report ...

Optimizing construction quality management of pavements using mechanistic performance analysis.

DOT National Transportation Integrated Search

2004-08-01

This report presents a statistical-based algorithm that was developed to reconcile the results from several pavement performance models used in the state of practice with systematic process control techniques. These algorithms identify project-specif...

Risk management in technovigilance: construction and validation of a medical-hospital product evaluation instrument.

PubMed

Kuwabara, Cleuza Catsue Takeda; Evora, Yolanda Dora Martinez; de Oliveira, Márcio Mattos Borges

2010-01-01

With the continuous incorporation of health technologies, hospital risk management should be implemented to systemize the monitoring of adverse effects, performing actions to control and eliminate their damage. As part of these actions, Technovigilance is active in the procedures of acquisition, use and quality control of health products and equipment. This study aimed to construct and validate an instrument to evaluate medical-hospital products. This is a quantitative, exploratory, longitudinal and methodological development study, based on the Six Sigma quality management model, which has as its principle basis the component stages of the DMAIC Cycle. For data collection and content validation, the Delphi technique was used with professionals from the Brazilian Sentinel Hospital Network. It was concluded that the instrument developed permitted the evaluation of the product, differentiating between the results of the tested brands, in line with the initial study goal of qualifying the evaluations performed.

An innovative time-cost-quality tradeoff modeling of building construction project based on resource allocation.

PubMed

Hu, Wenfa; He, Xinhua

2014-01-01

The time, quality, and cost are three important but contradictive objectives in a building construction project. It is a tough challenge for project managers to optimize them since they are different parameters. This paper presents a time-cost-quality optimization model that enables managers to optimize multiobjectives. The model is from the project breakdown structure method where task resources in a construction project are divided into a series of activities and further into construction labors, materials, equipment, and administration. The resources utilized in a construction activity would eventually determine its construction time, cost, and quality, and a complex time-cost-quality trade-off model is finally generated based on correlations between construction activities. A genetic algorithm tool is applied in the model to solve the comprehensive nonlinear time-cost-quality problems. Building of a three-storey house is an example to illustrate the implementation of the model, demonstrate its advantages in optimizing trade-off of construction time, cost, and quality, and help make a winning decision in construction practices. The computational time-cost-quality curves in visual graphics from the case study prove traditional cost-time assumptions reasonable and also prove this time-cost-quality trade-off model sophisticated.

Spatio-temporal variation of stream-aquifer interaction: Effect of a weir construction in Korea

NASA Astrophysics Data System (ADS)

Lee, Hyeonju; Koo, Min-Ho; Kim, Kisu; Kim, Yongcheol

2015-04-01

The Four Major Rivers Restoration Project was conducted to secure sufficient water resources, introduce comprehensive flood control measures, and improve water quality while restore the river ecosystem in Korea. The dredging of river bed and the installation of 16 weirs were done in Han, Geum, Yeongsan, and Nakdong rivers from late 2010 to early 2012 as a part of the project. Groundwater data obtained from 213 groundwater monitoring wells near the four major rivers were used to analyze the impacts of weir construction on the nearby groundwater flow system. The groundwater level and chemical characteristics were analyzed to investigate how the groundwater flow system and water quality changed after the weir construction. The results showed that groundwater level rose immediately following the rise of stream stage after the weir construction. Also, the hydrologic condition of the stream in some upland of the weirs was changed from a gaining to a losing stream. Consequently, the direction of groundwater flow was changed from perpendicular to parallel to the stream, and it swapped the groundwater in the downstream of the weir for the water recharged from the stream. Considering the results, some groundwater quality is expected to be changed and become similar to that of the stream, although the change has been not observed yet. Therefore, both further monitoring of the groundwater quality and hydrogeochemical analysis are required for quantitatively evaluating the effect of the weir.

Controllability of Complex Dynamic Objects

NASA Astrophysics Data System (ADS)

Kalach, G. G.; Kazachek, N. A.; Morozov, A. A.

2017-01-01

Quality requirements for mobile robots intended for both specialized and everyday use are increasing in step with the complexity of the technological tasks assigned to the robots. Whether a mobile robot is for ground, aerial, or underwater use, the relevant quality characteristics can be summarized under the common concept of agility. This term denotes the object’s (the robot)’s ability to react quickly to control actions (change speed and direction), turn in a limited area, etc. When using this approach in integrated assessment of the quality characteristics of an object with the control system, it seems more constructive to use the term “degree of control”. This paper assesses the degree of control by an example of a mobile robot with the variable-geometry drive wheel axle. We show changes in the degree of control depending on the robot’s configuration, and results illustrated by calculation data, computer and practical experiments. We describe the prospects of using intelligent technology for efficient control of objects with a high degree of controllability.

About the features of the design of X-ray systems for nondestructive control in industry

NASA Astrophysics Data System (ADS)

Bessonov, V. B.; Obodovskiy, A. V.; Potrakhov, Y. N.

2018-02-01

X-ray methods for nondestructive control take the priority place if necessary to exercise quality control of a product, to define presence of defects and to execute expert researches. In the present work, an attempt is made to systematize some features in the design and construction of installations for X-ray non-destructive control using the example of developments conducted at St. Petersburg State Electrotechnical University “LETI”.

[Discussion on research thinking of traditional Chinese medicine standardization system based on whole process quality control].

PubMed

Dong, Ling; Sun, Yu; Pei, Wen-Xuan; Dai, Jun-Dong; Wang, Zi-Yu; Pan, Meng; Chen, Jiang-Peng; Wang, Yun

2017-12-01

The concept of "Quality by design" indicates that good design for the whole life cycle of pharmaceutical production enables the drug to meet the expected quality requirements. Aiming at the existing problems of the traditional Chinese medicine (TCM) industry, the TCM standardization system was put forward in this paper from the national strategic level, under the guidance by the idea of quality control in international manufacturing industry and with considerations of TCM industry's own characteristics and development status. The connotation of this strategy was to establish five interrelated systems: multi-indicators system based on tri-indicators system, quality standard and specification system of TCM herbal materials and decoction pieces, quality traceability system, data monitoring system based on whole-process quality control, and whole-process quality management system of TCM, and achieve the whole process systematic and scientific study in TCM industry through "top-level design-implement in steps-system integration" workflow. This article analyzed the correlation between the quality standards of all links, established standard operating procedures of each link and whole process, and constructed a high standard overall quality management system for TCM industry chains, in order to provide a demonstration for the establishment of TCM whole-process quality control system and provide systematic reference and basis for standardization strategy in TCM industry. Copyright© by the Chinese Pharmaceutical Association.

Development of rational pay factors based on concrete compressive strength data

DOT National Transportation Integrated Search

2008-06-01

This research project addresses the opportunity to contain the escalating costs of concrete materials in construction projects. Both statistical process control and rational acceptance criteria show that quality improvement and cost savings can be ac...

Acoustic Directivity Patterns for Army Weapons

DTIC Science & Technology

1979-01-01

work was performed by the Environmental Division (EN), u.S. Army Construction Engineering Research Laboratory (CERL). Dr. R. K. Jain is Chief of EN...V) P.0. Schomer,,, L. M./Little I rTPRFORMING ORGANI ZATION NAME AND ADDRESS 0.PROG3RAM ELEMENT. PPOJECT, TAWF U.S. ARMY AREA & WORK UNIT NUMBERS...34Environmental Quality for Construction and Operation of Military Facilities" Task 03, "Pollution Control Technology" and Work Unit 001, "Prediction of

Research on construction quality and improvement of assembly construction

NASA Astrophysics Data System (ADS)

Cheng, Fei

2017-11-01

Based on the acceleration of the urbanization process and the improvement of the quality of life of our residents, the demand for building construction has been increasing. In this context, the construction industry in order to promote the construction efficiency, quality improvement, to meet the needs of the development of the times to strengthen the new technology, the use of new technologies. At present, China’s engineering construction units in the process of carrying out the project to strengthen the use of assembly-type construction technology, which thus achieved for the traditional construction work low-level, high time-consuming issues, and promote the steady improvement of production efficiency. Based on this, this paper focuses on the analysis of the connotation of the assembly structure and analyzes the quality problems in the construction process of the construction projects and puts forward the improvement measures to promote the improvement of the building quality and the construction of the building Construction speed. Based on this, this paper analyzes the structural system and design of prefabricated building.

An Innovative Time-Cost-Quality Tradeoff Modeling of Building Construction Project Based on Resource Allocation

PubMed Central

2014-01-01

The time, quality, and cost are three important but contradictive objectives in a building construction project. It is a tough challenge for project managers to optimize them since they are different parameters. This paper presents a time-cost-quality optimization model that enables managers to optimize multiobjectives. The model is from the project breakdown structure method where task resources in a construction project are divided into a series of activities and further into construction labors, materials, equipment, and administration. The resources utilized in a construction activity would eventually determine its construction time, cost, and quality, and a complex time-cost-quality trade-off model is finally generated based on correlations between construction activities. A genetic algorithm tool is applied in the model to solve the comprehensive nonlinear time-cost-quality problems. Building of a three-storey house is an example to illustrate the implementation of the model, demonstrate its advantages in optimizing trade-off of construction time, cost, and quality, and help make a winning decision in construction practices. The computational time-cost-quality curves in visual graphics from the case study prove traditional cost-time assumptions reasonable and also prove this time-cost-quality trade-off model sophisticated. PMID:24672351

Human responses to augmented virtual scaffolding models.

PubMed

Hsiao, Hongwei; Simeonov, Peter; Dotson, Brian; Ammons, Douglas; Kau, Tsui-Ying; Chiou, Sharon

2005-08-15

This study investigated the effect of adding real planks, in virtual scaffolding models of elevation, on human performance in a surround-screen virtual reality (SSVR) system. Twenty-four construction workers and 24 inexperienced controls performed walking tasks on real and virtual planks at three virtual heights (0, 6 m, 12 m) and two scaffolding-platform-width conditions (30, 60 cm). Gait patterns, walking instability measurements and cardiovascular reactivity were assessed. The results showed differences in human responses to real vs. virtual planks in walking patterns, instability score and heart-rate inter-beat intervals; it appeared that adding real planks in the SSVR virtual scaffolding model enhanced the quality of SSVR as a human - environment interface research tool. In addition, there were significant differences in performance between construction workers and the control group. The inexperienced participants were more unstable as compared to construction workers. Both groups increased their stride length with repetitions of the task, indicating a possibly confidence- or habit-related learning effect. The practical implications of this study are in the adoption of augmented virtual models of elevated construction environments for injury prevention research, and the development of programme for balance-control training to reduce the risk of falls at elevation before workers enter a construction job.

ACHP | Working Together to Build a More Inclusive Preservation Program

Science.gov Websites

and economic ramifications of physical structures that were not going to stand the test of time or lead the pre-construction survey team and also served as Quality Control Manager for the last four

Numerical simulation of intelligent compaction technology for construction quality control.

DOT National Transportation Integrated Search

2015-02-01

For eciently updating models of large-scale structures, the response surface (RS) method based on radial basis : functions (RBFs) is proposed to model the input-output relationship of structures. The key issues for applying : the proposed method a...

Performance of pervious pavement parking bays storing rainwater in the north of Spain.

PubMed

Gomez-Ullate, E; Bayon, J R; Coupe, S; Castro-Fresno, D

2010-01-01

Pervious pavements are drainage techniques that improve urban water management in a sustainable manner. An experimental pervious pavement parking area has been constructed in the north of Spain (Santander), with the aim of harvesting good quality rainwater. Forty-five pervious pavement structures have been designed and constructed to measure stored water quantity and quality simultaneously. Ten of these structures are specifically constructed with different geotextile layers for improving water storage within the pavements. Following the confirmation in previous laboratory experiments that the geotextile influenced on water storage, two different geosynthetics (Inbitex and a One Way evaporation control membrane) and control pervious pavements with no geotextile layers were tested in the field. Weather conditions were monitored in order to find correlations with the water storage within the pervious pavement models tested. During one year of monitoring the three different pervious pavement types tested remained at their maximum storage capacity. The heavy rain events which occurred during the experimental period caused evaporation rates within the pervious pavements to be not significant, but allowed the researchers to observe certain trends in the water storage. Temperature was the most closely correlated weather factor with the level of the water stored within the pervious pavements tested.

The OGCleaner: filtering false-positive homology clusters.

PubMed

Fujimoto, M Stanley; Suvorov, Anton; Jensen, Nicholas O; Clement, Mark J; Snell, Quinn; Bybee, Seth M

2017-01-01

Detecting homologous sequences in organisms is an essential step in protein structure and function prediction, gene annotation and phylogenetic tree construction. Heuristic methods are often employed for quality control of putative homology clusters. These heuristics, however, usually only apply to pairwise sequence comparison and do not examine clusters as a whole. We present the Orthology Group Cleaner (the OGCleaner), a tool designed for filtering putative orthology groups as homology or non-homology clusters by considering all sequences in a cluster. The OGCleaner relies on high-quality orthologous groups identified in OrthoDB to train machine learning algorithms that are able to distinguish between true-positive and false-positive homology groups. This package aims to improve the quality of phylogenetic tree construction especially in instances of lower-quality transcriptome assemblies. https://github.com/byucsl/ogcleaner CONTACT: sfujimoto@gmail.comSupplementary information: Supplementary data are available at Bioinformatics online. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Improving transcriptome construction in non-model organisms: integrating manual and automated gene definition in Emiliania huxleyi.

PubMed

Feldmesser, Ester; Rosenwasser, Shilo; Vardi, Assaf; Ben-Dor, Shifra

2014-02-22

The advent of Next Generation Sequencing technologies and corresponding bioinformatics tools allows the definition of transcriptomes in non-model organisms. Non-model organisms are of great ecological and biotechnological significance, and consequently the understanding of their unique metabolic pathways is essential. Several methods that integrate de novo assembly with genome-based assembly have been proposed. Yet, there are many open challenges in defining genes, particularly where genomes are not available or incomplete. Despite the large numbers of transcriptome assemblies that have been performed, quality control of the transcript building process, particularly on the protein level, is rarely performed if ever. To test and improve the quality of the automated transcriptome reconstruction, we used manually defined and curated genes, several of them experimentally validated. Several approaches to transcript construction were utilized, based on the available data: a draft genome, high quality RNAseq reads, and ESTs. In order to maximize the contribution of the various data, we integrated methods including de novo and genome based assembly, as well as EST clustering. After each step a set of manually curated genes was used for quality assessment of the transcripts. The interplay between the automated pipeline and the quality control indicated which additional processes were required to improve the transcriptome reconstruction. We discovered that E. huxleyi has a very high percentage of non-canonical splice junctions, and relatively high rates of intron retention, which caused unique issues with the currently available tools. While individual tools missed genes and artificially joined overlapping transcripts, combining the results of several tools improved the completeness and quality considerably. The final collection, created from the integration of several quality control and improvement rounds, was compared to the manually defined set both on the DNA and protein levels, and resulted in an improvement of 20% versus any of the read-based approaches alone. To the best of our knowledge, this is the first time that an automated transcript definition is subjected to quality control using manually defined and curated genes and thereafter the process is improved. We recommend using a set of manually curated genes to troubleshoot transcriptome reconstruction.

Marital relationship, parenting practices, and social skills development in preschool children.

PubMed

Hosokawa, Rikuya; Katsura, Toshiki

2017-01-01

This study examined the pathways by which destructive and constructive marital conflict leading to social skills development in preschool children, are mediated through negative and positive parenting practices. Mothers of 2931 Japanese children, aged 5-6 years, completed self-report questionnaires regarding their marital relationship (the Quality of co-parental communication scale) and parental practices (the Alabama parenting questionnaire). The children's teachers evaluated their social skills using the Social skills scale. Path analyses revealed significant direct paths from destructive marital conflict to negative parenting practices and lower scores on the self-control component of social skills. In addition, negative parenting practices mediated the relationship between destructive marital conflict and lower scores on cooperation, self-control, and assertion. Our analyses also revealed significant direct paths from constructive marital conflict to positive parenting practices, and higher scores on cooperation and assertion. Positive parenting practices mediated the relationship between constructive marital conflict and higher scores on self-control and assertion. These findings suggest that destructive and constructive marital conflict may directly and indirectly influence children's social skills development through the mediation of parenting practices.

Automation of testing modules of controller ELSY-ТМК

NASA Astrophysics Data System (ADS)

Dolotov, A. E.; Dolotova, R. G.; Petuhov, D. V.; Potapova, A. P.

2017-01-01

In modern life, there are means for automation of various processes which allow one to provide high quality standards of released products and to raise labour efficiency. In the given paper, the data on the automation of the test process of the ELSY-TMK controller [1] is presented. The ELSY-TMK programmed logic controller is an effective modular platform for construction of automation systems for small and average branches of industrial production. The modern and functional standard of communication and open environment of the logic controller give a powerful tool of wide spectrum applications for industrial automation. The algorithm allows one to test controller modules by operating the switching system and external devices faster and at a higher level of quality than a human without such means does.

Measuring Authoritative Teaching

ERIC Educational Resources Information Center

Ertesvag, Sigrun K.

2011-01-01

High quality measurements are important to evaluate interventions. The study reports on the development of a measurement to investigate authoritative teaching understood as a two-dimensional construct of warmth and control. Through the application of confirmatory factor analysis (CFA) and structural equation modelling (SEM) the factor structure…

Improved rice method for determining theoretical maximum density of asphalt paving mixtures

DOT National Transportation Integrated Search

1992-05-01

Rice method (ASTM D2041 ) is used for determining the theoretical maximum specific gravity of asphalt paving mixtures which is one of the main test parameters used for mix design and construction quality control. The repeatability and reproducibility...

Enhancing Technology Education Students' Understanding of ISO 9000.

ERIC Educational Resources Information Center

Harding, Kerry A.; Tesolowski, Dennis G.; Simmons, J. Bryan

2000-01-01

Defines ISO 9000, the quality control standard of the International Organization for Standardization (ISO), and looks at the benefits of ISO certification. Looks at the four levels of ISO 9000 and discusses the construction of training courses to prepare ISO documentation. (JOW)

Quality control of highway concrete containing fly ash.

DOT National Transportation Integrated Search

1981-01-01

This report is essentially a synthesis of pertinent information concerning the use of fly ash as an ingredient in concrete for highway construction. It has been prepared to provide a basis for an adequate response by the Department of Highways and Tr...

Urban Stormwater Characterization, Control, and Treatment.

PubMed

Moore, Trisha L; Rodak, Carolyn M; Vogel, Jason R

2017-10-01

A summary of 246 studies published in 2016 on topics related to the characterization and management of urban stormwater runoff is presented in the following review. The review is structured along three major topical areas: (1) general characterization of stormwater quantity and quality; (2) engineered systems for stormwater control and treatment, including erosion and sediment control practices, constructed stormwater ponds and wetlands, bioretention, permeable pavement, greenroofs, and rainwater harvesting and (3) watershedscale application of stormwater treatment and control practices. Common research themes and needs highlighted throughout this review include efforts to better understand stormwater transport and treatment mechanisms and their representation in models, advancements to optimize the design of stormwater control measures to meet specific hydrologic and/or water quality targets, and increasing understanding of the biophysical and social factors that influence watershed-scale implementation of low impact development and other stormwater control measures.

The influence of wind farm development on the hydrochemistry and ecology of an upland stream.

PubMed

Millidine, K J; Malcolm, I A; McCartney, A; Laughton, R; Gibbins, C N; Fryer, R J

2015-08-01

Despite perceptions of pristine condition, upland environments are increasingly subject to a range of anthropogenic pressures including air pollution, climate change, land-use change and evolving land management strategies. Although they have received little attention to date, the large-scale development of upland wind farms also has the potential to disturb vegetation and soils, alter hydrology and water quality and, thus, impact freshwater ecosystems. This paper presents the findings of a 5-year study of the impacts of wind farm construction on the freshwater environment. Data on water quality, invertebrate and fish populations were collected for 2 years before construction and for the following 3 years covering the construction period and the initial period of the farm's operation. In contrast to previous studies, the impacts of the wind farm development were assessed for a suite of potentially affected hydrochemical variables using a before-after-control-impact (BACI) analysis that allowed separation of construction effects from spatial and temporal variability in hydroclimatological conditions, thereby providing an improved, more robust evidence base. There was a small but significant negative effect of construction on pH, alkalinity (Alk) and acid neutralising capacity (ANC) in the upper part of the treatment catchment, which was where the wind farm was situated. The effects were more marked under higher flow conditions. It is hypothesised that this reflects changes in hydrological processes with increased near-surface runoff or organic acid mobilisation. There was no indication that either invertebrate community structure or fish densities were impacted by construction and the resulting effects on water quality.

Writing standard operating procedures (SOPs) for cryostorage protocols: using shoot meristem cryopreservation as an example.

PubMed

Harding, Keith; Benson, Erica E

2015-01-01

Standard operating procedures are a systematic way of making sure that biopreservation processes, tasks, protocols, and operations are correctly and consistently performed. They are the basic documents of biorepository quality management systems and are used in quality assurance, control, and improvement. Methodologies for constructing workflows and writing standard operating procedures and work instructions are described using a plant cryopreservation protocol as an example. This chapter is pertinent to other biopreservation sectors because how methods are written, interpreted, and implemented can affect the quality of storage outcomes.

Ecological Health and Water Quality Assessments in Big Creek Lake, AL

NASA Astrophysics Data System (ADS)

Childs, L. M.; Frey, J. W.; Jones, J. B.; Maki, A. E.; Brozen, M. W.; Malik, S.; Allain, M.; Mitchell, B.; Batina, M.; Brooks, A. O.

2008-12-01

Big Creek Lake (aka J.B. Converse Reservoir) serves as the water supply for the majority of residents in Mobile County, Alabama. The area surrounding the reservoir serves as a gopher tortoise mitigation bank and is protected from further development, however, impacts from previous disasters and construction have greatly impacted the Big Creek Lake area. The Escatawpa Watershed drains into the lake, and of the seven drainage streams, three have received a 303 (d) (impaired water bodies) designation in the past. In the adjacent ecosystem, the forest is experiencing major stress from drought and pine bark beetle infestations. Various agencies are using control methods such as pesticide treatment to eradicate the beetles. There are many concerns about these control methods and the run-off into the ecosystem. In addition to pesticide control methods, the Highway 98 construction projects cross the north area of the lake. The community has expressed concern about both direct and indirect impacts of these construction projects on the lake. This project addresses concerns about water quality, increasing drought in the Southeastern U.S., forest health as it relates to vegetation stress, and state and federal needs for improved assessment methods supported by remotely sensed data to determine coastal forest susceptibility to pine bark beetles. Landsat TM, ASTER, MODIS, and EO-1/ALI imagery was employed in Normalized Difference Vegetation Index (NDVI) and Normalized Difference Moisture Index (NDMI), as well as to detect concentration of suspended solids, chlorophyll and water turbidity. This study utilizes NASA Earth Observation Systems to determine how environmental conditions and human activity relate to pine tree stress and the onset of pine beetle invasion, as well as relate current water quality data to community concerns and gain a better understanding of human impacts upon water resources.

Quality assurance program requirements, Amendment 5 (9-26-79) to August 1973 issue

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This standard sets forth general requirements for planning, managing, conducting, and evaluating quality assurance programs for reactor development and test facility projects and associated processes, structures, components, and systems. These quality assurance requirements are based on proven practices and provide the means of control and verification whereby those responsible fo poject management can assure that the quality required for safe, reliable, and economical operation will be achieved. The objective of the program of the programs covered by this standard is to assure that structures, components, systems, and facilities are designed, developed, manufactured, constructed, operated, and maintained in compliance with establishedmore » engineering criteria. To achieve this objective, controls are to be established and implemented at predetermined points, and necessary action taken to prevent, detect, and correct any deficiencies.« less

The Transforming Maternity Care Project: Goals, Methods, and Outcomes of a National Maternity Care Policy Initiative, With Construction of a Theoretical Model to Explain the Process

DTIC Science & Technology

2011-03-21

to and receive comprehensive high-quality, high-value reproductive health and maternity care. • Comprehensive health care reform strategies...and its implementation, ensure that access to comprehensive, high-quality reproductive health and maternity care services are essential benefits for... Reproductive Health, Centers for Disease Control and Prevention Stakeholder Workgroup Consumers and their Advocates Chair: Judy Norsigian

Contract management techniques for improving construction quality

DOT National Transportation Integrated Search

1997-07-01

Efforts to improve quality in highway construction embrace many aspects of the construction process. Quality goals include enhanced efficiency and productivity, optimal cost and delivery time, improved performance, and changes in attitude-promoting a...

Development of terminology for mammographic techniques for radiological technologists.

PubMed

Yagahara, Ayako; Yokooka, Yuki; Tsuji, Shintaro; Nishimoto, Naoki; Uesugi, Masahito; Muto, Hiroshi; Ohba, Hisateru; Kurowarabi, Kunio; Ogasawara, Katsuhiko

2011-07-01

We are developing a mammographic ontology to share knowledge of the mammographic domain for radiologic technologists, with the aim of improving mammographic techniques. As a first step in constructing the ontology, we used mammography reference books to establish mammographic terminology for identifying currently available knowledge. This study proceeded in three steps: (1) determination of the domain and scope of the terminology, (2) lexical extraction, and (3) construction of hierarchical structures. We extracted terms mainly from three reference books and constructed the hierarchical structures manually. We compared features of the terms extracted from the three reference books. We constructed a terminology consisting of 440 subclasses grouped into 19 top-level classes: anatomic entity, image quality factor, findings, material, risk, breast, histological classification of breast tumors, role, foreign body, mammographic technique, physics, purpose of mammography examination, explanation of mammography examination, image development, abbreviation, quality control, equipment, interpretation, and evaluation of clinical imaging. The number of terms that occurred in the subclasses varied depending on which reference book was used. We developed a terminology of mammographic techniques for radiologic technologists consisting of 440 terms.

Quadratic trigonometric B-spline for image interpolation using GA

PubMed Central

Abbas, Samreen; Irshad, Misbah

2017-01-01

In this article, a new quadratic trigonometric B-spline with control parameters is constructed to address the problems related to two dimensional digital image interpolation. The newly constructed spline is then used to design an image interpolation scheme together with one of the soft computing techniques named as Genetic Algorithm (GA). The idea of GA has been formed to optimize the control parameters in the description of newly constructed spline. The Feature SIMilarity (FSIM), Structure SIMilarity (SSIM) and Multi-Scale Structure SIMilarity (MS-SSIM) indices along with traditional Peak Signal-to-Noise Ratio (PSNR) are employed as image quality metrics to analyze and compare the outcomes of approach offered in this work, with three of the present digital image interpolation schemes. The upshots show that the proposed scheme is better choice to deal with the problems associated to image interpolation. PMID:28640906

Quadratic trigonometric B-spline for image interpolation using GA.

PubMed

Hussain, Malik Zawwar; Abbas, Samreen; Irshad, Misbah

2017-01-01

In this article, a new quadratic trigonometric B-spline with control parameters is constructed to address the problems related to two dimensional digital image interpolation. The newly constructed spline is then used to design an image interpolation scheme together with one of the soft computing techniques named as Genetic Algorithm (GA). The idea of GA has been formed to optimize the control parameters in the description of newly constructed spline. The Feature SIMilarity (FSIM), Structure SIMilarity (SSIM) and Multi-Scale Structure SIMilarity (MS-SSIM) indices along with traditional Peak Signal-to-Noise Ratio (PSNR) are employed as image quality metrics to analyze and compare the outcomes of approach offered in this work, with three of the present digital image interpolation schemes. The upshots show that the proposed scheme is better choice to deal with the problems associated to image interpolation.

Energy Savings Analysis for Energy Monitoring and Control Systems

DTIC Science & Technology

1995-01-01

for evaluating design and construction a:-0 quality, and for studying the effectiveness of air - tightening AC retrofits. No simple relationship...Energy These models of residential infiltration are based on statistical "Resource Center (1983) include information on air tightening in fits of

Pre-Engineered Buildings and School Construction.

ERIC Educational Resources Information Center

Jurney, Douglas M.

1979-01-01

A preengineered building has the advantages of factory production and computerized quality control. Insulation efficiency and a roofing system that enables the entire roof membrane to react a full two inches to any temperature-induced movement are two of the innovations of preengineered building research. (Author/MLF)

40 CFR 130.11 - Program management.

Code of Federal Regulations, 2011 CFR

2011-07-01

... quality standards (WQS), development of alternative approaches to control pollution, implementation and... primarily to manage the wastewater treatment works construction grants program pursuant to the provisions of 40 CFR part 35, subpart J. A State may also use part of the 205(g) funds to administer approved...

Petaluma Revisited

ERIC Educational Resources Information Center

Wolff, Anthony

1975-01-01

If economic recovery occurs, land development and construction will revive simultaneously with land-use controls. Already the Federal government has affected land use by passing the Coastal Zone Management Act and the Clean Air Act. The states have also initiated land-use regulations concerning community planning and environmental quality. (MR)

Low-Cost, High-Throughput Sequencing of DNA Assemblies Using a Highly Multiplexed Nextera Process.

PubMed

Shapland, Elaine B; Holmes, Victor; Reeves, Christopher D; Sorokin, Elena; Durot, Maxime; Platt, Darren; Allen, Christopher; Dean, Jed; Serber, Zach; Newman, Jack; Chandran, Sunil

2015-07-17

In recent years, next-generation sequencing (NGS) technology has greatly reduced the cost of sequencing whole genomes, whereas the cost of sequence verification of plasmids via Sanger sequencing has remained high. Consequently, industrial-scale strain engineers either limit the number of designs or take short cuts in quality control. Here, we show that over 4000 plasmids can be completely sequenced in one Illumina MiSeq run for less than $3 each (15× coverage), which is a 20-fold reduction over using Sanger sequencing (2× coverage). We reduced the volume of the Nextera tagmentation reaction by 100-fold and developed an automated workflow to prepare thousands of samples for sequencing. We also developed software to track the samples and associated sequence data and to rapidly identify correctly assembled constructs having the fewest defects. As DNA synthesis and assembly become a centralized commodity, this NGS quality control (QC) process will be essential to groups operating high-throughput pipelines for DNA construction.

Overview of the ATLAS Insertable B-Layer (IBL) Project

NASA Astrophysics Data System (ADS)

Kagan, M. A.

2014-06-01

The first upgrade for the Pixel Detector will be a new pixel layer which is currently under construction and will be installed during the first shutdown of the LHC machine, in 2013-14. The new detector, called the Insertable B-layer (IBL), will be installed between the existing Pixel Detector and a new, smaller radius beam-pipe. Two different silicon sensor technologies, planar n-in-n and 3D, will be used, connected with the new generation 130nm IBM CMOS FE-I4 readout chip via solder bump-bonds. A production quality control test bench was set up in the ATLAS inner detector assembly clean room to verify and rate the performance of the detector elements before integration around the beam-pipe. An overview of the IBL project, of the module design, the qualification for these sensor technologies, the integration quality control setups and recent results in the construction of this full scale new concept detector is discussed.

Projection pursuit water quality evaluation model based on chicken swam algorithm

NASA Astrophysics Data System (ADS)

Hu, Zhe

2018-03-01

In view of the uncertainty and ambiguity of each index in water quality evaluation, in order to solve the incompatibility of evaluation results of individual water quality indexes, a projection pursuit model based on chicken swam algorithm is proposed. The projection index function which can reflect the water quality condition is constructed, the chicken group algorithm (CSA) is introduced, the projection index function is optimized, the best projection direction of the projection index function is sought, and the best projection value is obtained to realize the water quality evaluation. The comparison between this method and other methods shows that it is reasonable and feasible to provide decision-making basis for water pollution control in the basin.

Quality Control of Wind Data from 50-MHz Doppler Radar Wind Profiler

NASA Technical Reports Server (NTRS)

Vacek, Austin

2016-01-01

Upper-level wind profiles obtained from a 50-MHz Doppler Radar Wind Profiler (DRWP) instrument at Kennedy Space Center are incorporated in space launch vehicle design and day-of-launch operations to assess wind effects on the vehicle during ascent. Automated and manual quality control (QC) techniques are implemented to remove spurious data in the upper-level wind profiles caused from atmospheric and non-atmospheric artifacts over the 2010-2012 period of record (POR). By adding the new quality controlled profiles with older profiles from 1997-2009, a robust database will be constructed of upper-level wind characteristics. Statistical analysis will determine the maximum, minimum, and 95th percentile of the wind components from the DRWP profiles over recent POR and compare against the older database. Additionally, this study identifies specific QC flags triggered during the QC process to understand how much data is retained and removed from the profiles.

Quality Control of Wind Data from 50-MHz Doppler Radar Wind Profiler

NASA Technical Reports Server (NTRS)

Vacek, Austin

2015-01-01

Upper-level wind profiles obtained from a 50-MHz Doppler Radar Wind Profiler (DRWP) instrument at Kennedy Space Center are incorporated in space launch vehicle design and day-of-launch operations to assess wind effects on the vehicle during ascent. Automated and manual quality control (QC) techniques are implemented to remove spurious data in the upper-level wind profiles caused from atmospheric and non-atmospheric artifacts over the 2010-2012 period of record (POR). By adding the new quality controlled profiles with older profiles from 1997-2009, a robust database will be constructed of upper-level wind characteristics. Statistical analysis will determine the maximum, minimum, and 95th percentile of the wind components from the DRWP profiles over recent POR and compare against the older database. Additionally, this study identifies specific QC flags triggered during the QC process to understand how much data is retained and removed from the profiles.

Autonomy and control in dyads: effects on interaction quality and joint creative performance.

PubMed

Weinstein, Netta; Hodgins, Holley S; Ryan, Richard M

2010-12-01

Two studies examined interaction quality and joint performance on two creative tasks in unacquainted dyads primed for autonomy or control orientations. It was hypothesized that autonomy-primed dyads would interact more constructively, experience more positive mood, and engage the task more readily, and as a result these dyads would perform better. To test this, Study 1 primed orientation and explored verbal creative performance on the Remote Associates Task (RAT). In Study 2, dyads were primed with autonomy and control orientation and videotaped during two joint creative tasks, one verbal (RAT) and one nonverbal (charades). Videotapes were coded for behavioral indicators of closeness and task engagement. Results showed that autonomy-primed dyads felt closer, were more emotionally and cognitively attuned, provided empathy and encouragement to partners, and performed more effectively. The effects of primed autonomy on creative performance were mediated by interpersonal quality, mood, and joint engagement.

A New Quality Control Method base on IRMCD for Wind Profiler Observation towards Future Assimilation Application

NASA Astrophysics Data System (ADS)

Chen, Min; Zhang, Yu

2017-04-01

A wind profiler network with a total of 65 profiling radars was operated by the MOC/CMA in China until July 2015. In this study, a quality control procedure is constructed to incorporate the profiler data from the wind-profiling network into the local data assimilation and forecasting system (BJRUC). The procedure applies a blacklisting check that removes stations with gross errors and an outlier check that rejects data with large deviations from the background. Instead of the bi-weighting method, which has been commonly implemented in outlier elimination for one-dimensional scalar observations, an outlier elimination method is developed based on the iterated reweighted minimum covariance determinant (IRMCD) for multi-variate observations such as wind profiler data. A quality control experiment is separately performed for subsets containing profiler data tagged in parallel with/without rain flags at every 00UTC/12UTC from 20 June to 30 Sep 2015. From the results, we find that with the quality control, the frequency distributions of the differences between the observations and model background become more Gaussian-like and meet the requirements of a Gaussian distribution for data assimilation. Further intensive assessment for each quality control step reveals that the stations rejected by blacklisting contain poor data quality, and the IRMCD rejects outliers in a robust and physically reasonable manner.

46 CFR 164.013-6 - Production tests, inspections, and marking.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL MATERIALS Foam, Unicellular Polyethylene (Buoyant... shall provide in-plant quality control of polyethylene foam in accordance with the requirements of § 164.019-13 and any requirements of the recognized laboratory. The manufacturer of the foam has primary...

46 CFR 164.013-6 - Production tests, inspections, and marking.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL MATERIALS Foam, Unicellular Polyethylene (Buoyant... shall provide in-plant quality control of polyethylene foam in accordance with the requirements of § 164.019-13 and any requirements of the recognized laboratory. The manufacturer of the foam has primary...

FILTER FENCE DESIGN AID FOR SEDIMENT CONTROL AT CONSTRUCTION SITES

EPA Science Inventory

The focus of environmental policy and regulation is increasing on water quality issues. Particularly, there is a more widespread awareness that sediment is one of the most prevalent pollutants and that the impacts of excess sediment released into lakes and rivers can be as damag...

40 CFR 204.57-3 - Test compressor preparation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... PROGRAMS NOISE EMISSION STANDARDS FOR CONSTRUCTION EQUIPMENT Portable Air Compressors § 204.57-3 Test... measurement methodology. (c) In the event of compressor manfunction (i.e., failure to start, misfiring... in a normal manner. (d) No quality control, testing, assembly, or selection procedures shall be used...

Decision Support Tool for Nighttime Construction and Air Quality - User’s Guide

DOT National Transportation Integrated Search

2017-11-01

The Texas Department of Transportation (TxDOT) Research Project 0-6864 Investigate the Air Quality Benefits of Nighttime Construction in Non-attainment Counties investigated the potential air quality benefits of shifting construction/maintenance acti...

Near infrared spectroscopy based monitoring of extraction processes of raw material with the help of dynamic predictive modeling

NASA Astrophysics Data System (ADS)

Wang, Haixia; Suo, Tongchuan; Wu, Xiaolin; Zhang, Yue; Wang, Chunhua; Yu, Heshui; Li, Zheng

2018-03-01

The control of batch-to-batch quality variations remains a challenging task for pharmaceutical industries, e.g., traditional Chinese medicine (TCM) manufacturing. One difficult problem is to produce pharmaceutical products with consistent quality from raw material of large quality variations. In this paper, an integrated methodology combining the near infrared spectroscopy (NIRS) and dynamic predictive modeling is developed for the monitoring and control of the batch extraction process of licorice. With the spectra data in hand, the initial state of the process is firstly estimated with a state-space model to construct a process monitoring strategy for the early detection of variations induced by the initial process inputs such as raw materials. Secondly, the quality property of the end product is predicted at the mid-course during the extraction process with a partial least squares (PLS) model. The batch-end-time (BET) is then adjusted accordingly to minimize the quality variations. In conclusion, our study shows that with the help of the dynamic predictive modeling, NIRS can offer the past and future information of the process, which enables more accurate monitoring and control of process performance and product quality.

Engineered Hyporheic Zones as Novel Water Quality Best Management Practice: Flow and Contaminant Attenuation in Constructed Stream Experiments

NASA Astrophysics Data System (ADS)

Herzog, S.; McCray, J. E.; Higgins, C. P.

2015-12-01

The hyporheic zone is a hotspot for biogeochemical processing that can attenuate a variety of nonpoint source contaminants in streamwater. However, hyporheic zones in urban and agricultural streams are often degraded and poorly connected with surface water. In order to increase hyporheic exchange and improve water quality, we introduced engineered streambeds as a stormwater and restoration best management practice. Modifications to streambed hydraulic conductivity and reactivity are termed Biohydrochemical Enhancement structures for Streamwater Treatment (BEST). BEST are subsurface modules that utilize low- and high-permeability sediments to drive efficient hyporheic exchange, and reactive geomedia to increase reaction rates within the hyporheic zone. This work presents the first physical performance data of BEST modules at the pilot scale. BEST modules were installed in a constructed stream facility at the Colorado School of Mines in Golden, CO. This facility features two 15m artificial streams, which included an all sand control condition alongside the BEST test condition. Streams were continuously operated at a discharge of 1 L/s using recycled water. Time-lapse electrical resistivity surveys demonstrated that BEST modules provided substantially greater hyporheic exchange than the control condition. Water quality samples at the hyporheic and reach scales also revealed greater attenuation of nitrogen, coliforms, and select metals and trace organics by BEST modules relative to the control condition. These experimental results were also compared to previous numerical model simulations to evaluate model accuracy. Together, these results show that BEST may be an effective best management practice for improving streamwater quality in urban and agricultural settings.

Production and engineering methods for CARB: TEK (trade name) batteries in fork lift trucks

NASA Astrophysics Data System (ADS)

Schaefer, J. C.

1975-03-01

The purpose of this program is to develop the manufacturing technology of the Carb Tek molten salt Li/Cl battery to the prototype level. This purpose is being accomplished by actually constructing cells on a pilot line, optimizing process steps, establishing quality control procedures, and engineering appropriate changes. The majority of the cell work is performed in a controlled argon atmosphere. Results show that the carbon selected for the cell cathode can develop the required 5 Whr/cubic inch even when damaged by stress cracks. Anode contamination and fabrication problems have been reduced by a new alloying technique. Cell yields are dependent on weld quality.

Value function in economic growth model

NASA Astrophysics Data System (ADS)

Bagno, Alexander; Tarasyev, Alexandr A.; Tarasyev, Alexander M.

2017-11-01

Properties of the value function are examined in an infinite horizon optimal control problem with an unlimited integrand index appearing in the quality functional with a discount factor. Optimal control problems of such type describe solutions in models of economic growth. Necessary and sufficient conditions are derived to ensure that the value function satisfies the infinitesimal stability properties. It is proved that value function coincides with the minimax solution of the Hamilton-Jacobi equation. Description of the growth asymptotic behavior for the value function is provided for the logarithmic, power and exponential quality functionals and an example is given to illustrate construction of the value function in economic growth models.

The natural history of children with joint hypermobility syndrome and Ehlers-Danlos hypermobility type: a longitudinal cohort study.

PubMed

Scheper, Mark C; Nicholson, Lesley L; Adams, Roger D; Tofts, Louise; Pacey, Verity

2017-12-01

The objective of the manuscript was to describe the natural history of complaints and disability in children diagnosed with joint hypermobility syndrome (JHS)/Ehlers-Danlos-hypermobility type (EDS-HT) and to identify the constructs that underlie functional decline. One hundred and one JHS/EDS-HT children were observed over 3 years and assessed at three time points on the following: functional impairments, quality of life, connective tissue laxity, muscle function, postural control and musculoskeletal and multi-systemic complaints. Cluster analysis was performed to identify subgroups in severity. Clinical profiles were determined for these subgroups, and differences were assessed by multivariate analysis of covariance. Mixed linear regression models were used to determine the subsequent trajectories. Finally, an exploratory factor analysis was used to uncover the underlying constructs of functional impairment. Three clusters of children were identified in terms of functional impairment: mild, moderately and severely affected. Functional impairment at baseline was predictive of worsening trajectories in terms of reduced walking distance and decreased quality of life (P ⩽ 0.05) over 3 years. Multiple interactions between the secondary outcomes were observed, with four underlying constructs identified. All four constructs (multi-systemic effects, pain, fatigue and loss of postural control) contributed significantly to disability (P ⩽ 0.046). Children diagnosed with JHS/EDS-HT who have a high incidence of multi-systemic complaints (particularly, orthostatic intolerance, urinary incontinence and diarrhoea) and poor postural control in addition to high levels of pain and fatigue at baseline are most likely to have a deteriorating trajectory of functional impairment and, accordingly, warrant clinical prioritization. © The Author 2017. Published by Oxford University Press on behalf of the British Society for Rheumatology. All rights reserved. For Permissions, please email: journals.permissions@oup.com

Indoor air quality and the law in Singapore.

PubMed

Chan, P

1999-12-01

With the greater use of air-conditioned offices in Singapore, achieving good indoor air quality has become an important issue. The laws that impose duties upon designers and contractors with respect to the design and construction of air-conditioning and mechanical ventilation (ACMV) systems are set out in the Building Control Regulations and the Singapore Standard Code of Practice for Mechanical Ventilation and Air-conditioning in Buildings (hereinafter "SS CP 13:1980"). ACMV maintenance is governed by the Environmental Public Health Act, the Building and Common Property (Maintenance and Management) Act, and the Land Titles (Strata) Act, as well as by lease or tenancy agreements. Designers, contractors, developers, building owners and management corporations may also be liable to the workers, occupants and other premises users for indoor air quality (IAQ)-related injuries under the general principles of contract and tort. Recently, the Guidelines for Good Indoor Air Quality in Office Premises was issued by the Ministry of Environment to complement SS CP 13:1980 toward improving the indoor air quality of air-conditioned office premises. Although the Guidelines have no statutory effect, they may be adopted as contractual requirements in construction, lease and maintenance contracts. They may also be used to determine the relevant standard of duty of care required to discharge tortious liability. This paper looks at the existing laws and rules affecting the design, construction and maintenance of air-conditioned offices in light of Part III of the Ministry's Guidelines.

Elementary Introduction to the Green Management of the Construction in Whole Process

NASA Astrophysics Data System (ADS)

Na), Wu Y. N.(Yun; Yu), Yan H. Y.(Hong; Jun), Huang Z. J.(Zhi

Construction industries consume more energy resources than necessary. it is essential to establish a management system with all pollution problems resolved to construct green buildings. By applying the theory of whole life cycle, this paper divides the whole process of construction into four sub-phases, which will also be subdivided into more concrete working procedures. Based on this, a systematic framework is promoted for the green management of the construction, especially and creatively, considering the green aims as important as the traditional three aims-"quality aim, schedule aim and cost aim". This framework, adhering to the integration idea-"customers first, whole optimal", regards the green control and workflow as an organic whole in order to build green, sustainable and healthy architecture, and then provide a perfect guide and reference to the green management.

Analysis of quality raw data of second generation sequencers with Quality Assessment Software.

PubMed

Ramos, Rommel Tj; Carneiro, Adriana R; Baumbach, Jan; Azevedo, Vasco; Schneider, Maria Pc; Silva, Artur

2011-04-18

Second generation technologies have advantages over Sanger; however, they have resulted in new challenges for the genome construction process, especially because of the small size of the reads, despite the high degree of coverage. Independent of the program chosen for the construction process, DNA sequences are superimposed, based on identity, to extend the reads, generating contigs; mismatches indicate a lack of homology and are not included. This process improves our confidence in the sequences that are generated. We developed Quality Assessment Software, with which one can review graphs showing the distribution of quality values from the sequencing reads. This software allow us to adopt more stringent quality standards for sequence data, based on quality-graph analysis and estimated coverage after applying the quality filter, providing acceptable sequence coverage for genome construction from short reads. Quality filtering is a fundamental step in the process of constructing genomes, as it reduces the frequency of incorrect alignments that are caused by measuring errors, which can occur during the construction process due to the size of the reads, provoking misassemblies. Application of quality filters to sequence data, using the software Quality Assessment, along with graphing analyses, provided greater precision in the definition of cutoff parameters, which increased the accuracy of genome construction.

Robust control charts in industrial production of olive oil

NASA Astrophysics Data System (ADS)

Grilo, Luís M.; Mateus, Dina M. R.; Alves, Ana C.; Grilo, Helena L.

2014-10-01

Acidity is one of the most important variables in the quality analysis and characterization of olive oil. During the industrial production we use individuals and moving range charts to monitor this variable, which is not always normal distributed. After a brief exploratory data analysis, where we use the bootstrap method, we construct control charts, before and after a Box-Cox transformation, and compare their robustness and performance.

The effects of elevated highway construction on water quality in Louisiana wetlands : final report.

DOT National Transportation Integrated Search

1981-02-02

This study is to determined by physical, chemical, and biological means, the effects of bridged highway construction techniques on water quality in wetlands. Water quality was monitored before, during, and after construction. The data shows the incre...

Evidencing Learning Outcomes: A Multi-Level, Multi-Dimensional Course Alignment Model

ERIC Educational Resources Information Center

Sridharan, Bhavani; Leitch, Shona; Watty, Kim

2015-01-01

This conceptual framework proposes a multi-level, multi-dimensional course alignment model to implement a contextualised constructive alignment of rubric design that authentically evidences and assesses learning outcomes. By embedding quality control mechanisms at each level for each dimension, this model facilitates the development of an aligned…

40 CFR 35.937-3 - Evaluation of qualifications.

Code of Federal Regulations, 2012 CFR

2012-07-01

... bodies, and with private industry, including such factors as control of costs, quality of work, and ability to meet schedules; (3) The candidate's capacity to perform the work (including any specialized... ASSISTANCE STATE AND LOCAL ASSISTANCE Grants for Construction of Treatment Works-Clean Water Act § 35.937-3...

40 CFR 35.937-3 - Evaluation of qualifications.

Code of Federal Regulations, 2011 CFR

2011-07-01

... bodies, and with private industry, including such factors as control of costs, quality of work, and ability to meet schedules; (3) The candidate's capacity to perform the work (including any specialized... ASSISTANCE STATE AND LOCAL ASSISTANCE Grants for Construction of Treatment Works-Clean Water Act § 35.937-3...

40 CFR 35.937-3 - Evaluation of qualifications.

Code of Federal Regulations, 2013 CFR

2013-07-01

... bodies, and with private industry, including such factors as control of costs, quality of work, and ability to meet schedules; (3) The candidate's capacity to perform the work (including any specialized... ASSISTANCE STATE AND LOCAL ASSISTANCE Grants for Construction of Treatment Works-Clean Water Act § 35.937-3...

Civil (French/US) certification of the Coast Guard's HH-65A Dauphin

NASA Technical Reports Server (NTRS)

Hart, J. C.; Besse, J. M.; Mcelreath, K. W.

1982-01-01

Certification programs with particular emphasis on handling qualities requirements are described. A dynamic simulator was designed and constructed to support and verify the dynamic aspects of the avionics system, particularly the Automatic Flight Control System (AFCS). The role of the Dynamic Simulator is discussed.

Corpus-Based Optimization of Language Models Derived from Unification Grammars

NASA Technical Reports Server (NTRS)

Rayner, Manny; Hockey, Beth Ann; James, Frankie; Bratt, Harry; Bratt, Elizabeth O.; Gawron, Mark; Goldwater, Sharon; Dowding, John; Bhagat, Amrita

2000-01-01

We describe a technique which makes it feasible to improve the performance of a language model derived from a manually constructed unification grammar, using low-quality untranscribed speech data and a minimum of human annotation. The method is on a medium-vocabulary spoken language command and control task.

Construction of high-quality recombination maps with low-coverage genomic sequencing for joint linkage analysis in maize

USDA-ARS?s Scientific Manuscript database

A genome-wide association study (GWAS) is the foremost strategy used for finding genes that control human diseases and agriculturally important traits, but it often reports false positives. In contrast, its complementary method, linkage analysis, provides direct genetic confirmation, but with limite...

Assessment of in situ test technology for construction control of base courses and embankments.

DOT National Transportation Integrated Search

2008-04-01

The main objective of this research is to assess the use of three nondestructive testing devices, the GeoGauge, the LFWD, and the DCP, in order to evaluate the in situ elastic modulus of highway materials for application in the quality assurance/qual...

30 CFR 75.337 - Construction and repair of seals.

Code of Federal Regulations, 2010 CFR

2010-07-01

... record shall be countersigned by the mine foreman or equivalent mine official by the end of the mine foreman's or equivalent mine official's next regularly scheduled working shift. The record shall be kept... quality control results to the District Manager for seal material properties specified by § 75.335 within...

30 CFR 75.337 - Construction and repair of seals.

Code of Federal Regulations, 2011 CFR

2011-07-01

... record shall be countersigned by the mine foreman or equivalent mine official by the end of the mine foreman's or equivalent mine official's next regularly scheduled working shift. The record shall be kept... quality control results to the District Manager for seal material properties specified by § 75.335 within...

Bibliographic Control of Large Quantities of Research Material.

ERIC Educational Resources Information Center

Evans, Martha M.

1983-01-01

Guidelines for individual researcher describe bibliographic methods for achieving high standards of quality while maintaining maximum efficiency in each step of all necessary procedures involved in the construction of a bibliography ranging from several hundred to several thousand items. Ways to minimize waste motion and duplication of effort are…

21 CFR 820.130 - Device packaging.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Device packaging. 820.130 Section 820.130 Food and... QUALITY SYSTEM REGULATION Labeling and Packaging Control § 820.130 Device packaging. Each manufacturer shall ensure that device packaging and shipping containers are designed and constructed to protect the...

40 CFR 35.937-3 - Evaluation of qualifications.

Code of Federal Regulations, 2014 CFR

2014-07-01

... bodies, and with private industry, including such factors as control of costs, quality of work, and ability to meet schedules; (3) The candidate's capacity to perform the work (including any specialized... ASSISTANCE STATE AND LOCAL ASSISTANCE Grants for Construction of Treatment Works-Clean Water Act § 35.937-3...

Reliability and quality assurance on the MOD 2 wind system

NASA Technical Reports Server (NTRS)

Mason, W. E. B.; Jones, B. G.

1981-01-01

The Safety, Reliability, and Quality Assurance (R&QA) approach developed for the largest wind turbine generator, the Mod 2, is described. The R&QA approach assures that the machine is not hazardous to the public or to the operating personnel, is operated unattended on a utility grid, demonstrates reliable operation, and helps establish the quality assurance and maintainability requirements for future wind turbine projects. The significant guideline consisted of a failure modes and effects analysis (FMEA) during the design phase, hardware inspections during parts fabrication, and three simple documents to control activities during machine construction and operation.

A worksite prevention program for construction workers: design of a randomized controlled trial.

PubMed

Oude Hengel, Karen M; Joling, Catelijne I; Proper, Karin I; Blatter, Birgitte M; Bongers, Paulien M

2010-06-14

A worksite prevention program was developed to promote the work ability of construction workers and thereby prolong a healthy working life. The objective of this paper is to present the design of a randomized controlled trial evaluating the effectiveness of that intervention program compared with usual care for construction workers. The study is designed as a randomized controlled trial with a follow-up of one year. Employees eligible for this study are construction workers performing actual construction work. The worksite intervention will be compared with usual care. This intervention was developed by using the Intervention Mapping approach and consists of the following components: (1) two individual training sessions of a physical therapist to lower the physical workload, (2) a Rest-Break tool to improve the balance between work and recovery, and (3) two empowerment training sessions to increase the influence of the construction workers at the worksite. Outcome measures are assessed at baseline, 3, 6, and 12 months. The primary outcome measures of this study are work ability and health-related quality of life. Secondary outcome measures include need for recovery, musculoskeletal complaints, work engagement and self efficacy. Cost-effectiveness will be evaluated from the company perspective. Moreover, a process evaluation will be conducted. The feasibility of the intervention and the study has been enhanced by creating an intervention program that explicitly appeals to construction workers and will not interfere too much with the ongoing construction. The feasibility and effectiveness of this worksite prevention program will be investigated by means of an effect- and a process evaluation. If proven effective, this worksite prevention program can be implemented on a larger scale within the construction industry. NTR1278.

A worksite prevention program for construction workers: design of a randomized controlled trial

PubMed Central

2010-01-01

Background A worksite prevention program was developed to promote the work ability of construction workers and thereby prolong a healthy working life. The objective of this paper is to present the design of a randomized controlled trial evaluating the effectiveness of that intervention program compared with usual care for construction workers. Methods The study is designed as a randomized controlled trial with a follow-up of one year. Employees eligible for this study are construction workers performing actual construction work. The worksite intervention will be compared with usual care. This intervention was developed by using the Intervention Mapping approach and consists of the following components: (1) two individual training sessions of a physical therapist to lower the physical workload, (2) a Rest-Break tool to improve the balance between work and recovery, and (3) two empowerment training sessions to increase the influence of the construction workers at the worksite. Outcome measures are assessed at baseline, 3, 6, and 12 months. The primary outcome measures of this study are work ability and health-related quality of life. Secondary outcome measures include need for recovery, musculoskeletal complaints, work engagement and self efficacy. Cost-effectiveness will be evaluated from the company perspective. Moreover, a process evaluation will be conducted. Discussion The feasibility of the intervention and the study has been enhanced by creating an intervention program that explicitly appeals to construction workers and will not interfere too much with the ongoing construction. The feasibility and effectiveness of this worksite prevention program will be investigated by means of an effect- and a process evaluation. If proven effective, this worksite prevention program can be implemented on a larger scale within the construction industry. Trial Registration NTR1278 PMID:20546568

The effects of elevated highway construction on water quality in Louisiana wetlands : interim report No. 1.

DOT National Transportation Integrated Search

1979-07-01

This study is to determined by physical, chemical, and biological means, the effects of bridged highway construction techniques on water quality in wetlands. Water quality was monitored before, during, and after construction. The data shows the incre...

Development of a validation process for parameters utilized in optimizing construction quality management of pavements.

DOT National Transportation Integrated Search

2006-01-01

The implementation of an effective performance-based construction quality management requires a tool for determining impacts of construction quality on the life-cycle performance of pavements. This report presents an update on the efforts in the deve...

The derivation of water quality criteria of copper in Biliu River

NASA Astrophysics Data System (ADS)

Zheng, Hongbo; Jia, Xinru

2018-03-01

Excessive copper in water can be detrimental to the health of human and aquatic life. China has promulgated Environmental Quality Standards for Surface Water to control water pollution, but uniform standard values may cause under-protection or over-protection. Therefore, the basic research work on water quality criteria of water source or reservoir is urgently needed. This study deduces the acute and chronic Water Quality Criteria (WQC) of copper in Biliu River by Species Sensitivity Distribution method (SSD). The result shows that BiDoseResp is the most suitable model and the acute and chronic water quality benchmark of copper are 10.72 µg•L-1 and 5.86 µg•L-1. This study provides basis for the construction of water quality standard of Liaoning and the environmental management of Biliu River.

Micronucleus Assay in Exfoliated Buccal Epithelial Cells Using Liquid Based Cytology Preparations in Building Construction Workers.

PubMed

Arul, P; Smitha, Shetty; Masilamani, Suresh; Akshatha, C

2018-01-01

Cytogenetic damage in exfoliated buccal epithelial cells due to environmental and occupational exposure is often monitored by micronucleus (MN) assay using liquid based cytology (LBC) preparations. This study was performed to evaluate MN in exfoliated buccal epithelial cells of building construction workers using LBC preparations. LBC preparations of exfoliated buccal epithelial cells from 100 subjects [50 building construction workers (cases) and 50 administrative staffs (controls)] was evaluated by May-Grunwald Giemsa, Hematoxylin and Eosin and Papanicolaou stains. Student's t test was used for statistical analysis and a P value of <0.05 was considered as statistically significant. The mean frequencies of MN for cases were significantly higher than controls regardless of staining methods used. There were statistically significant differences between smokers and non-smokers of the controls as well as duration of working exposure (<5 and >5 years) and smokers and non-smokers of cases (P=0.001). However, there were meaningful differences regarding mean frequencies of MN between smokers, non-smokers, those with alcohol consumption or not in cases and controls using various stains (P=0.001). There was an increased risk of cytogenetic damage in building construction workers. However, evaluation of MN of exfoliated buccal epithelial cells in building construction workers serve as a minimally invasive biomarker for cytogenetic damage. LBC preparations can be applied for MN assay as it improves the quality of smears and cell morphology, decreases the confounding factors and reduces false positive results.

Quality and productivity drive innovation and improvement at United Technologies Aerospace Operations, Inc.

NASA Technical Reports Server (NTRS)

Jamar, L. G.

1986-01-01

Quality and innovation are the hallmarks of the national space program. In programs that preceded the Shuttle Program the emphasis was on meeting the risks and technical challenges of space with safety, quality, reliability, and success. At United Technologies Aerospace Operations, Inc. (UTAO), the battle has developed along four primary fronts. These fronts include programs to motivate and reward people, development and construction of optimized processes and facilities, implementation of specifically tailored management systems, and the application of appropriate measurement and control systems. Each of these initiatives is described. However, to put this quality and productivity program in perspective, UTAO and its role in the Shuttle Program are described first.

Design and validation of a comprehensive fecal incontinence questionnaire.

PubMed

Macmillan, Alexandra K; Merrie, Arend E H; Marshall, Roger J; Parry, Bryan R

2008-10-01

Fecal incontinence can have a profound effect on quality of life. Its prevalence remains uncertain because of stigma, lack of consistent definition, and dearth of validated measures. This study was designed to develop a valid clinical and epidemiologic questionnaire, building on current literature and expertise. Patients and experts undertook face validity testing. Construct validity, criterion validity, and test-retest reliability was undertaken. Construct validity comprised factor analysis and internal consistency of the quality of life scale. The validity of known groups was tested against 77 control subjects by using regression models. Questionnaire results were compared with a stool diary for criterion validity. Test-retest reliability was calculated from repeated questionnaire completion. The questionnaire achieved good face validity. It was completed by 104 patients. The quality of life scale had four underlying traits (factor analysis) and high internal consistency (overall Cronbach alpha = 0.97). Patients and control subjects answered the questionnaire significantly differently (P < 0.01) in known-groups validity testing. Criterion validity assessment found mean differences close to zero. Median reliability for the whole questionnaire was 0.79 (range, 0.35-1). This questionnaire compares favorably with other available instruments, although the interpretation of stool consistency requires further research. Its sensitivity to treatment still needs to be investigated.

Evaluation of green roof as green technology for urban stormwater quantity and quality controls

NASA Astrophysics Data System (ADS)

Kok, K. H.; Sidek, L. M.; Abidin, M. R. Z.; Basri, H.; Muda, Z. C.; Beddu, S.

2013-06-01

Promoting green design, construction, reconstruction and operation of buildings has never been more critical than now due to the ever increasing greenhouse gas emissions and rapid urbanizations that are fuelling climate change more quickly. Driven by environmental needs, Green Building Index (GBI) was founded in Malaysia to drive initiative to lead the property industry towards becoming more environment-friendly. Green roof system is one of the assessment criteria of this rating system which is under category of sustainable site planning and management. An extensive green roof was constructed in Humid Tropics Center (HTC) Kuala Lumpur as one of the components for Stormwater Management Ecohydrology (SME) in order to obtain scientific data of the system. This paper evaluates the performance of extensive green roof at Humid Tropics Center with respect to urban heat island mitigation and stormwater quantity and quality controls. Findings indicate that there was a reduction of around 1.5°C for indoor temperature of the building after installation of green roof. Simulations showed that the peak discharge was reduced up to 24% relative to impervious brown roof. The results show an increment of pH and high concentration of phosphate for the runoff generated from the green roof and the runoff water quality ranged between class I and II under INWQS.

Managment and construction of the Large Binocular Telescope enclosure: Meeting unusual challenges with a competitive discipline

NASA Astrophysics Data System (ADS)

Slagle, James H.; Hill, John M.; Davison, Warren B.; Hart, Wood; Teran, Jose U.

1998-08-01

Planning, estimating, and building a telescope and its enclosure within a budget is a challenge to any project staff. The Large Binocular Telescope (LBT) project office goal has been to break every phase of the project into small packages and competitively bid the packages. In this way the project office can minimize costs and keep the project budget from escalating out of control. This paper will discuss both the unique and common problems associated with the building of telescopes into the next millennium. The discussion is centered on the planning and execution phases of construction for the LBT, located on Mt. Graham in Arizona. The paper will discuss the effects of delays on the actual start of the telescope due to environmental issues and the impact the delays had on design and budget. The paper will provide the solutions that have been incorporated by the LBT project office to maximize the quality of construction while holding costs to a minimum. The use of a team approach by the contractors, engineers, and the project office has been successful in maintaining quality construction at a reasonable cost.

Safe haven laws as crime control theater.

PubMed

Hammond, Michelle; Miller, Monica K; Griffin, Timothy

2010-07-01

This article examines safe haven laws, which allow parents to legally abandon their infants. The main objective is to determine whether safe haven laws fit the criteria of crime control theater, a term used to describe public policies that produce the appearance, but not the effect, of crime control, and as such are essentially socially constructed "solutions" to socially constructed crime "problems." The analysis will apply the principles of crime control theater to safe haven laws. Specifically, the term crime control theater applies to laws that are reactionary responses to perceived criminal threats and are often widely supported as a way to address the crime in question. Such laws are attractive because they appeal to mythic narratives (i.e., saving an innocent child from a predator); however they are likely ineffective due to the complexity of the crime. These laws can have deleterious effects when policymakers make false claims of success and stunt public discourse (e.g., drawing attention away from more frequent and preventable crimes). This analysis applies these criteria to safe haven laws to determine whether such laws can be classified as crime control theater. Many qualities inherent to crime control theater are present in safe haven laws. For example, the laws are highly publicized, their intentions lack moral ambiguity, rare cases of success legitimize law enforcement and other agencies, and they appeal to the public sense of responsibility in preventing crime. Yet the goal of saving infant lives may be unattainable. These qualities make the effectiveness of the laws questionable and suggest they may be counterproductive. This analysis determined that safe haven laws are socially constructed solutions to the socially constructed problem of child abandonment. Safe haven laws are appropriately classified as crime control theater. It is imperative that further research be conducted to examine the effectiveness and collateral effects of safe haven laws. Longitudinal studies and a nationwide database to better determine the effectiveness of safe haven laws are suggested. It is also crucial that agencies implementing SHLs closely monitor the reasons parents abandon their children, and adopt policies that re-focus the attention safe haven laws receive to address more frequent causes of harm to infants. Copyright © 2010 Elsevier Ltd. All rights reserved.

Statistical process control based chart for information systems security

NASA Astrophysics Data System (ADS)

Khan, Mansoor S.; Cui, Lirong

2015-07-01

Intrusion detection systems have a highly significant role in securing computer networks and information systems. To assure the reliability and quality of computer networks and information systems, it is highly desirable to develop techniques that detect intrusions into information systems. We put forward the concept of statistical process control (SPC) in computer networks and information systems intrusions. In this article we propose exponentially weighted moving average (EWMA) type quality monitoring scheme. Our proposed scheme has only one parameter which differentiates it from the past versions. We construct the control limits for the proposed scheme and investigate their effectiveness. We provide an industrial example for the sake of clarity for practitioner. We give comparison of the proposed scheme with EWMA schemes and p chart; finally we provide some recommendations for the future work.

Nuclear gauge application in road industry

NASA Astrophysics Data System (ADS)

Azmi Ismail, Mohd

2017-11-01

Soil compaction is essential in road construction. The evaluation of the degree of compaction relies on the knowledge of density and moisture of the compacted layers is very important to the performance of the pavement structure. Among the various tests used for making these determinations, the sand replacement density test and the moisture content determination by oven drying are perhaps the most widely used. However, these methods are not only time consuming and need wearisome procedures to obtain the results but also destructive and the number of measurements that can be taken at any time is limited. The test can on be fed back to the construction site the next day. To solve these problems, a nuclear technique has been introduced as a quicker and easier way of measuring the density and moisture of construction materials. Nuclear moisture density gauges have been used for many years in pavement construction as a method of non-destructive density testing The technique which can determine both wet density and moisture content offers an in situ method for construction control at the work site. The simplicity, the speed, and non-destructive nature offer a great advantage for quality control. This paper provides an overview of nuclear gauge application in road construction and presents a case study of monitoring compaction status of in Sedenak - Skudai, Johor rehabilitation projects.

Infrared Thermography As Quality Control For Foamed In-Place Insulation

NASA Astrophysics Data System (ADS)

Schwartz, Joel A.

1989-03-01

Since November of 1985, FOAM-TECH, INC. has been utilizing an I.S.I. Model 91 Videotherm Camera to quality control the installation of foamed in-place polyurethane and polyisocyanurate insulation. Monitoring the injection of foam into the walls and roofs of new construction and during the the retrofitting of older buildings has become an integral and routine step in daily operations. The Videotherm is also used to monitor the injection of foam into hot water tanks, trailer bodies for refrigeration trucks, and pontoons and buoys for flotation. The camera is also used for the detection of heat loss and air infiltration for conventionally insulated buildings. Appendix A are thermograms of foamed in-place insulation.

Energy Auditor and Quality Control Inspector Competency Model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Head, Heather R.; Kurnik, Charles W.; Schroeder, Derek

The Energy Auditor (EA) and Quality Control Inspector (QCI) Competency model was developed to identify the soft skills, foundational competencies and define the levels of Knowledge, Skills, and Abilities (KSAs) required to successfully perform the tasks defined in the EA and QCI Job Task Analysis (JTAs), the U.S. Department of Energy (DOE) used the U.S. Department of Labor's (DOL) Competency Model Clearinghouse resources to develop a QCI and EA Competency Model. To keep the QCI and EA competency model consistent with other construction and energy management competency models, DOE and the National Renewable Energy Laboratory used the existing 'Residential Constructionmore » Competency Model' and the 'Advanced Commercial Building Competency Model' where appropriate.« less

[Investigation on pattern and methods of quality control for Chinese materia medica based on dao-di herbs and bioassay - bioassay for Coptis chinensis].

PubMed

Yan, Dan; Xiao, Xiao-he

2011-05-01

Establishment of bioassay methods is the technical issues to be faced with in the bioassay of Chinese materia medica. Taking the bioassay of Coptis chinensis Franch. as an example, the establishment process and application of the bioassay methods (including bio-potency and bio-activity fingerprint) were explained from the aspects of methodology, principle of selection, experimental design, method confirmation and data analysis. The common technologies were extracted and formed with the above aspects, so as to provide technical support for constructing pattern and method of the quality control for Chinese materia medica based on the dao-di herbs and bioassay.

Liquid Rocket Booster (LRB) for the Space Transportation System (STS) systems study. Appendix G: LRB for the STS system study level 2 requirements, revision 1

NASA Technical Reports Server (NTRS)

1989-01-01

Requirements are presented for shuttle system definition; performance and design characteristics; shuttle vehicle end item performance and design characteristics; ground operations complex performance and design characteristics; operability and system design and construction standards; and quality control.

40 CFR 52.681 - Permits to construct and tier II operating permits.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Idaho § 52.681 Permits... Permits issued by the Idaho Department of Environmental Quality in accordance with the Federally-approved State of Idaho Rules for Control of Air Pollution in Idaho, incorporated by reference in section 52.670...

Record of Decision for the First Air National Guard F-35A Operational Base

DTIC Science & Technology

2013-12-02

Air Quality • Employ fugitive dust control and soil retention practices including: - Water trucks or sprinkler systems to keep all areas of vehicle...with local fire departments on F-35A crash response procedures. Soils and Water • Sequence construction activities to limit the soil exposure for

Outlet works energy dissipators - best practices for design, construction, problem identification and evaluation, inspection, maintenance, renovation, and repair

USDA-ARS?s Scientific Manuscript database

An outlet works is a combination of structures and equipment required for the safe operation and control of water released from a reservoir to serve various purposes like regulating stream flow and water quality; releasing floodwater; and/or providing irrigation, municipal, or industrial water. Out...

Multifactorial Optimization of Contrast-Enhanced Nanofocus Computed Tomography for Quantitative Analysis of Neo-Tissue Formation in Tissue Engineering Constructs.

PubMed

Sonnaert, Maarten; Kerckhofs, Greet; Papantoniou, Ioannis; Van Vlierberghe, Sandra; Boterberg, Veerle; Dubruel, Peter; Luyten, Frank P; Schrooten, Jan; Geris, Liesbet

2015-01-01

To progress the fields of tissue engineering (TE) and regenerative medicine, development of quantitative methods for non-invasive three dimensional characterization of engineered constructs (i.e. cells/tissue combined with scaffolds) becomes essential. In this study, we have defined the most optimal staining conditions for contrast-enhanced nanofocus computed tomography for three dimensional visualization and quantitative analysis of in vitro engineered neo-tissue (i.e. extracellular matrix containing cells) in perfusion bioreactor-developed Ti6Al4V constructs. A fractional factorial 'design of experiments' approach was used to elucidate the influence of the staining time and concentration of two contrast agents (Hexabrix and phosphotungstic acid) and the neo-tissue volume on the image contrast and dataset quality. Additionally, the neo-tissue shrinkage that was induced by phosphotungstic acid staining was quantified to determine the operating window within which this contrast agent can be accurately applied. For Hexabrix the staining concentration was the main parameter influencing image contrast and dataset quality. Using phosphotungstic acid the staining concentration had a significant influence on the image contrast while both staining concentration and neo-tissue volume had an influence on the dataset quality. The use of high concentrations of phosphotungstic acid did however introduce significant shrinkage of the neo-tissue indicating that, despite sub-optimal image contrast, low concentrations of this staining agent should be used to enable quantitative analysis. To conclude, design of experiments allowed us to define the most optimal staining conditions for contrast-enhanced nanofocus computed tomography to be used as a routine screening tool of neo-tissue formation in Ti6Al4V constructs, transforming it into a robust three dimensional quality control methodology.

Structured background grids for generation of unstructured grids by advancing front method

NASA Technical Reports Server (NTRS)

Pirzadeh, Shahyar

1991-01-01

A new method of background grid construction is introduced for generation of unstructured tetrahedral grids using the advancing-front technique. Unlike the conventional triangular/tetrahedral background grids which are difficult to construct and usually inadequate in performance, the new method exploits the simplicity of uniform Cartesian meshes and provides grids of better quality. The approach is analogous to solving a steady-state heat conduction problem with discrete heat sources. The spacing parameters of grid points are distributed over the nodes of a Cartesian background grid by interpolating from a few prescribed sources and solving a Poisson equation. To increase the control over the grid point distribution, a directional clustering approach is used. The new method is convenient to use and provides better grid quality and flexibility. Sample results are presented to demonstrate the power of the method.

23 CFR 637.207 - Quality assurance program.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Quality assurance program. 637.207 Section 637.207... CONSTRUCTION INSPECTION AND APPROVAL Quality Assurance Procedures for Construction § 637.207 Quality assurance program. (a) Each STD's quality assurance program shall provide for an acceptance program and an...

Quality control for the first large areas of triple-GEM chambers for the CMS endcaps

NASA Astrophysics Data System (ADS)

Abbaneo, D.; Abbas, M.; Abbrescia, M.; Abi Akl, M.; Aboamer, O.; Acosta, D.; Ahmad, A.; Ahmed, W.; Aleksandrov, A.; Altieri, P.; Asawatangtrakuldee, C.; Aspell, P.; Assran, Y.; Awan, I.; Bally, S.; Ban, Y.; Banerjee, S.; Barashko, V.; Barria, P.; Bencze, G.; Beni, N.; Benussi, L.; Bhopatkar, V.; Bianco, S.; Bos, J.; Bouhali, O.; Braghieri, A.; Braibant, S.; Buontempo, S.; Calabria, C.; Caponero, M.; Caputo, C.; Cassese, F.; Castaneda, A.; Cauwenbergh, S.; Cavallo, F. R.; Celik, A.; Choi, M.; Choi, S.; Christiansen, J.; Cimmino, A.; Colafranceschi, S.; Colaleo, A.; Conde Garcia, A.; Czellar, S.; Dabrowski, M. M.; De Lentdecker, G.; De Oliveira, R.; de Robertis, G.; Dildick, S.; Dorney, B.; Endroczi, G.; Errico, F.; Fenyvesi, A.; Ferry, S.; Furic, I.; Giacomelli, P.; Gilmore, J.; Golovtsov, V.; Guiducci, L.; Guilloux, F.; Gutierrez, A.; Hadjiiska, R. M.; Hauser, J.; Hoepfner, K.; Hohlmann, M.; Hoorani, H.; Iaydjiev, P.; Jeng, Y. G.; Kamon, T.; Karchin, P.; Korytov, A.; Krutelyov, S.; Kumar, A.; Kim, H.; Lee, J.; Lenzi, T.; Litov, L.; Loddo, F.; Madorsky, A.; Maerschalk, T.; Maggi, M.; Magnani, A.; Mal, P. K.; Mandal, K.; Marchioro, A.; Marinov, A.; Majumdar, N.; Merlin, J. A.; Mitselmakher, G.; Mohanty, A. K.; Mohapatra, A.; Molnar, J.; Muhammad, S.; Mukhopadhyay, S.; Naimuddin, M.; Nuzzo, S.; Oliveri, E.; Pant, L. M.; Paolucci, P.; Park, I.; Passeggio, G.; Pavlov, B.; Philipps, B.; Piccolo, D.; Postema, H.; Puig Baranac, A.; Radi, A.; Radogna, R.; Raffone, G.; Ranieri, A.; Rashevski, G.; Riccardi, C.; Rodozov, M.; Rodrigues, A.; Ropelewski, L.; RoyChowdhury, S.; Ryu, G.; Ryu, M. S.; Safonov, A.; Salva, S.; Saviano, G.; Sharma, A.; Sharma, A.; Sharma, R.; Shah, A. H.; Shopova, M.; Sturdy, J.; Sultanov, G.; Swain, S. K.; Szillasi, Z.; Talvitie, J.; Tatarinov, A.; Tuuva, T.; Tytgat, M.; Vai, I.; Van Stenis, M.; Venditti, R.; Verhagen, E.; Verwilligen, P.; Vitulo, P.; Volkov, S.; Vorobyev, A.; Wang, D.; Wang, M.; Yang, U.; Yang, Y.; Yonamine, R.; Zaganidis, N.; Zenoni, F.; Zhang, A.

2018-02-01

The CMS Collaboration plans to equip the very forward muon system with triple-GEM detectors that can withstand the environment of the High-Luminosity LHC. This project is at the final stages of R&D and moving to production. An unprecedented large area of several 100 m2 are to be instrumented with GEM detectors which will be produced in six different sites around the world. A common construction and quality control procedure is required to ensure the performance of each detector. The quality control steps will include optical inspection, cleaning and baking of all materials and parts used to build the detector, leakage current tests of the GEM foils, high voltage tests, gas leak tests of the chambers and monitoring pressure drop vs. time, gain calibration to know the optimal operation region of the detector, gain uniformity tests, and studying the efficiency, noise and tracking performance of the detectors in a cosmic stand using scintillators.

78 FR 54813 - Approval and Promulgation of Air Quality Implementation Plans; Colorado; Construction Permit...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-06

...] Approval and Promulgation of Air Quality Implementation Plans; Colorado; Construction Permit Program Fee Increases; Construction Permit Regulation of PM 2.5 ; Regulation 3 AGENCY: Environmental Protection Agency... construction permit processing fees. EPA proposes approval of Colorado's May 25, 2011 submittal, which...

Flight test results for several light, canard-configured airplanes

NASA Technical Reports Server (NTRS)

Brown, Philip W.

1987-01-01

Brief flight evaluations of two different, light, composite constructed, canard and winglet configured airplanes were performed to assess their handling qualities; one airplane was a single engine, pusher design and the other a twin engine, push-pull configuration. An emphasis was placed on the slow speed/high angle of attack region for both airplanes and on the engine-out regime for the twin. Mission suitability assessment included cockpit and control layout, ground and airborne handling qualities, and turbulence response. Very limited performance data was taken. Stall/spin tests and the effects of laminar flow loss on performance and handling qualities were assessed on an extended range, single engine pusher design.

Application of machine learning and expert systems to Statistical Process Control (SPC) chart interpretation

NASA Technical Reports Server (NTRS)

Shewhart, Mark

1991-01-01

Statistical Process Control (SPC) charts are one of several tools used in quality control. Other tools include flow charts, histograms, cause and effect diagrams, check sheets, Pareto diagrams, graphs, and scatter diagrams. A control chart is simply a graph which indicates process variation over time. The purpose of drawing a control chart is to detect any changes in the process signalled by abnormal points or patterns on the graph. The Artificial Intelligence Support Center (AISC) of the Acquisition Logistics Division has developed a hybrid machine learning expert system prototype which automates the process of constructing and interpreting control charts.

Is housing quality associated with malaria incidence among young children and mosquito vector numbers? Evidence from Korogwe, Tanzania.

PubMed

Liu, Jenny X; Bousema, Teun; Zelman, Brittany; Gesase, Samwel; Hashim, Ramadhan; Maxwell, Caroline; Chandramohan, Daniel; Gosling, Roly

2014-01-01

Several studies conducted in Northeast Tanzania have documented declines in malaria transmission even before interventions were scaled up. One explanation for these reductions may be the changes in socio-environmental conditions associated with economic development, and in particular improvements in housing construction. This analysis seeks to identify (1) risk factors for malaria incidence among young children and (2) household and environmental factors associated with mosquito vector numbers collected in the child's sleeping area. Both analyses focus on housing construction quality as a key determinant. For 435 children enrolled in a larger trial of intermittent preventive treatment for malaria in infants in the Korogwe District in Tanga, Northeastern Tanzania, detailed information on their dwelling characteristics were collected in the last year of the trial. Principal components analysis was used to construct an index of housing structure quality and converted to quintile units for regression analysis. Univariate and multivariate random effects negative binomial regressions were used to predict risk factors for child malaria incidence and the mean total number of indoor female Anopheles gambiae and funestus mosquitoes collected per household across three occasions. Building materials have substantially improved in Korogwe over time. Multivariate regressions showed that residing in rural areas (versus urban) increased malaria incidence rates by over three-fold and mean indoor female A. gambiae and funestus numbers by nearly two-fold. Compared to those residing in the lowest quality houses, children residing in the highest quality houses had one-third lower malaria incidence rates, even when wealth and rural residence were controlled for. Living in the highest quality houses reduced vector numbers while having cattle near the house significantly increased them. Results corroborate findings from other studies that show associations between malaria incidence and housing quality; associations were concentrated amongst the highest quality houses.

Features and perspectives of automatized construction crane-manipulators

NASA Astrophysics Data System (ADS)

Stepanov, Mikhail A.; Ilukhin, Peter A.

2018-03-01

Modern construction industry still has a high percentage of manual labor, and the greatest prospects of improving the construction process are lying in the field of automatization. In this article automatized construction manipulator-cranes are being studied in order to achieve the most rational design scheme. This is done through formulating a list of general conditions necessary for such cranes and a set of specialized kinematical conditions. A variety of kinematical schemes is evaluated via these conditions, and some are taken for further dynamical analisys. The comparative dynamical analisys of taken schemes was made and the most rational scheme was defined. Therefore a basis for a more complex and practical research of manipulator-cranes design is given and ways to implement them on practical level can now be calculated properly. Also, the perspectives of implementation of automated control systems and informational networks on construction sites in order to boost the quality of construction works, safety of labour and ecological safety are shown.

Spacecraft Cabin Air Quality Control and Its Application to Tight Buildings

NASA Technical Reports Server (NTRS)

Perry, J. L.; Graf, J. C.

1995-01-01

Air quality is an important consideration not only for the external environment, but also for the indoor environment. Most people spend a majority of their lives indoors and the air that they breathe is important to their physical and emotional well being. Since most modern building designs have focused on energy efficiency, less fresh air is brought from the outside. As a result, pollutants from building materials, furniture, cleaning, and cooking have no place to go. To make matters worse, most ventilation systems do not include any means for removing pollutants from the recycled air. Unfortunately, pollution at even a small level can result in eye, throat, and lung irritation in addition to chronic headaches, nausea, and fatigue. A spacecraft cabin, which represents the worst case in tight building design, requires special consideration of air quality since any effects pollutants may have on a crewmember can potentially place a mission or other crewmembers at risk. A detailed approach has been developed by the National Aeronautics and Space Administration (NASA) to minimize cabin atmosphere pollution and provide the crew with an environment which is as free of pollutants as possible. This approach is a combination of passive and active contamination control concepts involving the evaluation and selection of materials to be used onboard the spacecraft, the establishment of air quality standards to ensure crew health, and the use of active control means onboard the spacecraft to further ensure an acceptable atmosphere. This approach has allowed NASA to prevent illness by providing crewmembers with a cabin atmosphere which contains pollutant concentrations up to 100 times lower than those specified for terrestrial indoor environments. Standard building construction, however, does not take into account the potentially harmful effects of materials used in the construction process on the health of future occupants and relies primarily on remedial rather than preventive techniques when addressing contamination. This approach results in a building that theoretically has low operating costs, but may actually have high costs associated with lost work days, increased medical claims, decreased productivity, and problem remediation. A similar approach to NASA's may be adopted by the building construction community which can tap the extensive database of material offgassing properties that has been collected to support the space program. Many materials used by NASA are commercially available and are frequently used in building construction. In addition, computer models which have been developed for assessing various methods of active contamination control can be applied to building ventilation system design and the analysis of their economics. Through using NASA' s experience, the expense associated with the current remedial approach can be avoided.

Environmental Assessment: Construct Mass/Mobility Parking Lot at Grand Forks AFB, North Dakota

DTIC Science & Technology

2004-02-13

Water: Surface water quality could be degraded, both in the short-term, during actual construction, and over the long-term due to reduced storm water quality caused...term, during actual construction, and over the long-term due to reduced storm water quality caused by the increase of exposed soil. The short-term

Use Of Infrared Thermography For The Identification Of Design And Construction Faults In Buildings

NASA Astrophysics Data System (ADS)

Seeber, Stephen A.

1984-03-01

Many design and construction details can affect building energy consumption in unex-pected ways. Further, design and construction errors can increase building energy consumption, result in discomfort to building occupants and cause structural damage to the building. Infrared inspections can easily evaluate the energy efficiency of various aspects of a building's design and identify flaws that might otherwise be detected as a result of occupants' complaints or damage to the building's mechanical or structural systems. Infrared thermography can be used by the architect to evaluate his designs and by the contractor to control the quality of construction. This paper discusses a number of issues that can help determine the effectiveness of infrared building surveys. Following this, three case stud-ies will be presented to illustrate design flaws that were detected through infrared build-ing surveys.

Risk Allocation in Construction Contracting

DTIC Science & Technology

1992-01-01

contractor’s control, contingency amounts will be at a minimum. For risks that are beyond the con - tractor’s control, contingency amounts can...ficing the quality of work in a concerted effort to recoup his or her losses. 2.3 Owner’s Risk A complete shift of all risk from the owner to a con ...circumstances, a shortsighted attempt to shift certain risks to the contractor can have disastrous conse - quences. An owner’s erroneous reliance on the

Cabin Air Quality On Board Mir and the International Space Station: A Comparison

NASA Technical Reports Server (NTRS)

Macatangay, Ariel; Perry, Jay L.

2007-01-01

The maintenance of the cabin atmosphere aboard spacecraft is critical not only to its habitability but also to its function. Ideally, air quality can be maintained by striking a proper balance between the generation and removal of contaminants. Both very dynamic processes, the balance between generation and removal can be difficult to maintain and control because the state of the cabin atmosphere is in constant evolution responding to different perturbations. Typically, maintaining a clean cabin environment on board crewed spacecraft and space habitats is the central function of the environmental control and life support (ECLS) system. While active air quality control equipment is deployed on board every vehicle to remove carbon dioxide, water vapor, and trace chemical components from the cabin atmosphere, perturbations associated with logistics, vehicle construction and maintenance, and ECLS system configuration influence the resulting cabin atmospheric quality. The air-quality data obtained from the International Space Station (ISS) and NASA-Mir programs provides a wealth of information regarding the maintenance of the cabin atmosphere aboard long-lived space habitats. A comparison of the composition of the trace chemical contaminant load is presented. Correlations between ground-based and in-flight operations that influence cabin atmospheric quality are identified and discussed, and observations on cabin atmospheric quality during the NASA-Mir expeditions and the International Space Station are explored.

A Review of International Space Station Habitable Element Equipment Offgassing Characteristics

NASA Technical Reports Server (NTRS)

Perry, Jay L.

2010-01-01

Crewed spacecraft trace contaminant control employs both passive and active methods to achieve acceptable cabin atmospheric quality. Passive methods include carefully selecting materials of construction, employing clean manufacturing practices, and minimizing systems and payload operational impacts to the cabin environment. Materials selection and manufacturing processes constitute the first level of equipment offgassing control. An element-level equipment offgassing test provides preflight verification that passive controls have been successful. Offgassing test results from multiple International Space Station (ISS) habitable elements and cargo vehicles are summarized and implications for active contamination control equipment design are discussed

Quality planning in Construction Project

NASA Astrophysics Data System (ADS)

Othman, I.; Shafiq, Nasir; Nuruddin, M. F.

2017-12-01

The purpose of this paper is to investigate deeper on the factors that contribute to the effectiveness of quality planning, identifying the common problems encountered in quality planning, practices and ways for improvements in quality planning for construction projects. This paper involves data collected from construction company representatives across Malaysia that are obtained through semi-structured interviews as well as questionnaire distributions. Results shows that design of experiments (average index: 4.61), inspection (average index: 4.45) and quality audit as well as other methods (average index: 4.26) rank first, second and third most important factors respectively.

Evaluation on island ecological vulnerability and its spatial heterogeneity.

PubMed

Chi, Yuan; Shi, Honghua; Wang, Yuanyuan; Guo, Zhen; Wang, Enkang

2017-12-15

The evaluation on island ecological vulnerability (IEV) can help reveal the comprehensive characteristics of the island ecosystem and provide reference for controlling human activities on islands. An IEV evaluation model which reflects the land-sea dual features, natural and anthropogenic attributes, and spatial heterogeneity of the island ecosystem was established, and the southern islands of Miaodao Archipelago in North China were taken as the study area. The IEV, its spatial heterogeneity, and its sensitivities to the evaluation elements were analyzed. Results indicated that the IEV was in status of mild vulnerability in the archipelago scale, and population pressure, ecosystem productivity, environmental quality, landscape pattern, and economic development were the sensitive elements. The IEV showed significant spatial heterogeneities both in land and surrounding waters sub-ecosystems. Construction scale control, optimization of development allocation, improvement of exploitation methods, and reasonable ecological construction are important measures to control the IEV. Copyright © 2017 Elsevier Ltd. All rights reserved.

Importance of Macrophyte Quality in Determining Life-History Traits of the Apple Snails Pomacea canaliculata: Implications for Bottom-Up Management of an Invasive Herbivorous Pest in Constructed Wetlands

PubMed Central

Yam, Rita S. W.; Fan, Yen-Tzu; Wang, Tzu-Ting

2016-01-01

Pomacea canaliculata (Ampullariidae) has extensively invaded most Asian constructed wetlands and its massive herbivory of macrophytes has become a major cause of ecosystem dysfunctioning of these restored habitats. We conducted non-choice laboratory feeding experiments of P. canaliculata using five common macrophyte species in constructed wetlands including Ipomoea aquatica, Commelina communis, Nymphoides coreana, Acorus calamus and Phragmites australis. Effects of macrophytes on snail feeding, growth and fecundity responses were evaluated. Results indicated that P. canaliculata reared on Ipomoea had the highest feeding and growth rates with highest reproductive output, but all individuals fed with Phragmites showed lowest feeding rates and little growth with poorest reproductive output. Plant N and P contents were important for enhancing palatability, supporting growth and offspring quantity of P. canaliculata, whilst toughness, cellulose and phenolics had critically deterrent effects on various life-history traits. Although snail offspring quality was generally consistent regardless of maternal feeding conditions, the reduced growth and offspring quantity of the poorly-fed snails in constructed wetlands dominated by the less-palatable macrophytes could limit the invasive success of P. canaliculata. Effective bottom-up control of P. canaliculata in constructed wetlands should involve selective planting strategy using macrophytes with low nutrient and high toughness, cellulose and phenolic contents. PMID:26927135

Importance of Macrophyte Quality in Determining Life-History Traits of the Apple Snails Pomacea canaliculata: Implications for Bottom-Up Management of an Invasive Herbivorous Pest in Constructed Wetlands.

PubMed

Yam, Rita S W; Fan, Yen-Tzu; Wang, Tzu-Ting

2016-02-24

Pomacea canaliculata (Ampullariidae) has extensively invaded most Asian constructed wetlands and its massive herbivory of macrophytes has become a major cause of ecosystem dysfunctioning of these restored habitats. We conducted non-choice laboratory feeding experiments of P. canaliculata using five common macrophyte species in constructed wetlands including Ipomoea aquatica, Commelina communis, Nymphoides coreana, Acorus calamus and Phragmites australis. Effects of macrophytes on snail feeding, growth and fecundity responses were evaluated. Results indicated that P. canaliculata reared on Ipomoea had the highest feeding and growth rates with highest reproductive output, but all individuals fed with Phragmites showed lowest feeding rates and little growth with poorest reproductive output. Plant N and P contents were important for enhancing palatability, supporting growth and offspring quantity of P. canaliculata, whilst toughness, cellulose and phenolics had critically deterrent effects on various life-history traits. Although snail offspring quality was generally consistent regardless of maternal feeding conditions, the reduced growth and offspring quantity of the poorly-fed snails in constructed wetlands dominated by the less-palatable macrophytes could limit the invasive success of P. canaliculata. Effective bottom-up control of P. canaliculata in constructed wetlands should involve selective planting strategy using macrophytes with low nutrient and high toughness, cellulose and phenolic contents.

Introduction of Transplant Registry Unified Management Program 2 (TRUMP2): scripts for TRUMP data analyses, part I (variables other than HLA-related data).

PubMed

Atsuta, Yoshiko

2016-01-01

Collection and analysis of information on diseases and post-transplant courses of allogeneic hematopoietic stem cell transplant recipients have played important roles in improving therapeutic outcomes in hematopoietic stem cell transplantation. Efficient, high-quality data collection systems are essential. The introduction of the Second-Generation Transplant Registry Unified Management Program (TRUMP2) is intended to improve data quality and more efficient data management. The TRUMP2 system will also expand possible uses of data, as it is capable of building a more complex relational database. The construction of an accessible data utilization system for adequate data utilization by researchers would promote greater research activity. Study approval and management processes and authorship guidelines also need to be organized within this context. Quality control of processes for data manipulation and analysis will also affect study outcomes. Shared scripts have been introduced to define variables according to standard definitions for quality control and improving efficiency of registry studies using TRUMP data.

Developing a more useful surface quality metric for laser optics

NASA Astrophysics Data System (ADS)

Turchette, Quentin; Turner, Trey

2011-02-01

Light scatter due to surface defects on laser resonator optics produces losses which lower system efficiency and output power. The traditional methodology for surface quality inspection involves visual comparison of a component to scratch and dig (SAD) standards under controlled lighting and viewing conditions. Unfortunately, this process is subjective and operator dependent. Also, there is no clear correlation between inspection results and the actual performance impact of the optic in a laser resonator. As a result, laser manufacturers often overspecify surface quality in order to ensure that optics will not degrade laser performance due to scatter. This can drive up component costs and lengthen lead times. Alternatively, an objective test system for measuring optical scatter from defects can be constructed with a microscope, calibrated lighting, a CCD detector and image processing software. This approach is quantitative, highly repeatable and totally operator independent. Furthermore, it is flexible, allowing the user to set threshold levels as to what will or will not constitute a defect. This paper details how this automated, quantitative type of surface quality measurement can be constructed, and shows how its results correlate against conventional loss measurement techniques such as cavity ringdown times.

The concrete technology of post pouring zone of raft foundation of Hongyun Building B tower

NASA Astrophysics Data System (ADS)

Yin, Suhua; Yu, Liu; Wu, Yanli; Zhao, Ying

2017-08-01

The foundation of Hongyun building B tower is made of raft board foundation which is 3300mm in the thickness concreted pouring amount of large and the late poured band in the pouring settlement formed. The temperature of the pouring settlement was controlled in order to prevent the crack of the construction of the late poured band. The steel of post pouring band was designed and monitorred. The quality of post pouring band quality is guaranteed in the raft concrete foundation of Hongyun Building B tower.

Overview of Field Experience - Degradation Rates & Lifetimes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jordan, Dirk; Kurtz, Sarah

2015-09-14

The way a PV module fails may depend not only on its design and the materials used in its construction, but also on the weather it experiences, the way it is mounted, and the quality control during its manufacture. This presentation gives an overview of Field Experience - what degradation rates and what lifetimes are being observed in various regions.

10 CFR 32.26 - Gas and aerosol detectors containing byproduct material: Requirements for license to manufacture...

Code of Federal Regulations, 2010 CFR

2010-01-01

... byproduct material and designed to protect life or property from fires and airborne hazards, or to initially... submits sufficient information relating to the design, manufacture, prototype testing, quality control... paragraphs (b) (3) and (12) of this section; (5) Details of construction and design of the product as related...

10 CFR 32.26 - Gas and aerosol detectors containing byproduct material: Requirements for license to manufacture...

Code of Federal Regulations, 2012 CFR

2012-01-01

... byproduct material and designed to protect life or property from fires and airborne hazards, or to initially... submits sufficient information relating to the design, manufacture, prototype testing, quality control... paragraphs (b) (3) and (12) of this section; (5) Details of construction and design of the product as related...

RNA-SeQC: RNA-seq metrics for quality control and process optimization.

PubMed

DeLuca, David S; Levin, Joshua Z; Sivachenko, Andrey; Fennell, Timothy; Nazaire, Marc-Danie; Williams, Chris; Reich, Michael; Winckler, Wendy; Getz, Gad

2012-06-01

RNA-seq, the application of next-generation sequencing to RNA, provides transcriptome-wide characterization of cellular activity. Assessment of sequencing performance and library quality is critical to the interpretation of RNA-seq data, yet few tools exist to address this issue. We introduce RNA-SeQC, a program which provides key measures of data quality. These metrics include yield, alignment and duplication rates; GC bias, rRNA content, regions of alignment (exon, intron and intragenic), continuity of coverage, 3'/5' bias and count of detectable transcripts, among others. The software provides multi-sample evaluation of library construction protocols, input materials and other experimental parameters. The modularity of the software enables pipeline integration and the routine monitoring of key measures of data quality such as the number of alignable reads, duplication rates and rRNA contamination. RNA-SeQC allows investigators to make informed decisions about sample inclusion in downstream analysis. In summary, RNA-SeQC provides quality control measures critical to experiment design, process optimization and downstream computational analysis. See www.genepattern.org to run online, or www.broadinstitute.org/rna-seqc/ for a command line tool.

Preliminary study of ultrasonic structural quality control of Swiss-type cheese.

PubMed

Eskelinen, J J; Alavuotunki, A P; Haeggström, E; Alatossava, T

2007-09-01

There is demand for a new nondestructive cheese-structure analysis method for Swiss-type cheese. Such a method would provide the cheese-making industry the means to enhance process control and quality assurance. This paper presents a feasibility study on ultrasonic monitoring of the structural quality of Swiss cheese by using a single-transducer 2-MHz longitudinal mode pulse-echo setup. A volumetric ultrasonic image of a cheese sample featuring gas holes (cheese-eyes) and defects (cracks) in the scan area is presented. The image is compared with an optical reference image constructed from dissection images of the same sample. The results show that the ultrasonic method is capable of monitoring the gas-solid structure of the cheese during the ripening process. Moreover, the method can be used to detect and to characterize cheese-eyes and cracks in ripened cheese. Industrial application demands were taken into account when conducting the measurements.

Assessment of aggregate quality and petrographic properties' influence on rock quality: A case study from Nordland county, Norway

NASA Astrophysics Data System (ADS)

Kløve Keiding, Jakob; Erichsen, Eyolf; Heldal, Tom; Aslaksen Aasly, Kari

2017-04-01

Good access to construction materials is crucial for future infrastructure development and continued economic growth. In Norway >80 % of construction materials come from crushed aggregates and represent an growing share of the consumption. Although recycling to some extend can cover the need for construction materials, economic growth, increasing population and urbanization necessitates exploitation of new rock resources in Norway as well as many other parts of the world. Aggregates must fulfill a number of technical requirements to ensure high quality and long life expectancy of new roads, buildings and structures. Aggregates also have to be extracted near the consumer market. Particularly for road construction strict criteria are in place for wearing course for roads with high traffic density. Thus knowledge of mechanical rock quality is paramount for both exploitation as well as future resource and land-use planning but is often not assessed or mapped beyond the quarry scale. The Geological survey of Norway runs a database with information about crushed aggregate deposits from >1500 Norwegian quarries and sample sites. Here we use mechanical test analyses from the database to assess the aggregate quality in the Nordland county, Norway. Maps have been produced linking bed rock geology with rock quality parameters. The survey documents that the county is challenged in meeting the requirements for roads with high traffic density and especially in the middle parts of the county many samples have weak mechanical properties. This to some degree reflect that weak Cambro-Silurian rocks like phyllite, schist, carbonate and greenstone are abundant in Nordland. Typically mechanically stronger rock types such as gabbro, monzonite and granite are also exposed in large parts of the county, but are also characterized by relative poor or very variable mechanical test quality. Preliminary results indicate that many intrinsic parameters influence the mechanical rock strength, but variable degrees of deformation in the different tectonostratigraphic units exposed in Nordland affects the rock mechanical properties and is a prominent feature of our mapping. Unsurprisingly rock type, mineralogy, grain size and rock texture are all important factors that have a major control on the mechanical behaviour of the rocks. However, this assessment shows that there is an intricate interaction between these parameters and the resulting mechanical properties at present making it difficult to assess mechanical quality accurately only based on petrographic examination.

Introduction to fiber optics: Sensors for biomedical applications.

PubMed

Shah, R Y; Agrawal, Y K

2011-01-01

The paper focuses on the introduction of fiber optics, a fusion of science and engineering and describes the materials generally used for its construction along with the procedure used to design the fibers. It gives an idea of the materials used for the construction along with the pros and cons associated with them and various factors governing the emission of ultraviolet, infrared or visible radiations. The central core revolves around the applications of optical fibers in the medical and biomedical field and extending the use of the same in pharmaceutical industry as probes in quality control and dosage form analysis.

Research on the technologies of cracking-resistance of mass concrete in subway station

NASA Astrophysics Data System (ADS)

Sheng, Yanmin; Li, Shujin; Jiang, Guoquan; Shi, Xiaoqing; Yang, Zhu; Zhu, Zhihang

2018-03-01

This paper takes the theory of multi-field coupling and the model of hydration-temperature-humidity-constraint to assess the effect of cracking-resistance on structural concrete and optimize the controlling index of crack resistance. The effect is caused by structure, material and construction, etc. The preparation technology of high cracking-resistance concrete is formed through the researching on the temperature rising and deformation over the controlling influence of new anti-cracking materials and technologies. A series of technologies on anti-cracking and waterproof in underground structural concrete of urban rail transit are formed based on the above study. The technologies include design, construction, materials and monitoring. Those technologies are used in actual engineering to improve the quality of urban rail transit and this brings significant economic and social benefits.

Evaluating the Good Ontology Design Guideline (GoodOD) with the Ontology Quality Requirements and Evaluation Method and Metrics (OQuaRE)

PubMed Central

Duque-Ramos, Astrid; Boeker, Martin; Jansen, Ludger; Schulz, Stefan; Iniesta, Miguela; Fernández-Breis, Jesualdo Tomás

2014-01-01

Objective To (1) evaluate the GoodOD guideline for ontology development by applying the OQuaRE evaluation method and metrics to the ontology artefacts that were produced by students in a randomized controlled trial, and (2) informally compare the OQuaRE evaluation method with gold standard and competency questions based evaluation methods, respectively. Background In the last decades many methods for ontology construction and ontology evaluation have been proposed. However, none of them has become a standard and there is no empirical evidence of comparative evaluation of such methods. This paper brings together GoodOD and OQuaRE. GoodOD is a guideline for developing robust ontologies. It was previously evaluated in a randomized controlled trial employing metrics based on gold standard ontologies and competency questions as outcome parameters. OQuaRE is a method for ontology quality evaluation which adapts the SQuaRE standard for software product quality to ontologies and has been successfully used for evaluating the quality of ontologies. Methods In this paper, we evaluate the effect of training in ontology construction based on the GoodOD guideline within the OQuaRE quality evaluation framework and compare the results with those obtained for the previous studies based on the same data. Results Our results show a significant effect of the GoodOD training over developed ontologies by topics: (a) a highly significant effect was detected in three topics from the analysis of the ontologies of untrained and trained students; (b) both positive and negative training effects with respect to the gold standard were found for five topics. Conclusion The GoodOD guideline had a significant effect over the quality of the ontologies developed. Our results show that GoodOD ontologies can be effectively evaluated using OQuaRE and that OQuaRE is able to provide additional useful information about the quality of the GoodOD ontologies. PMID:25148262

Evaluating the Good Ontology Design Guideline (GoodOD) with the ontology quality requirements and evaluation method and metrics (OQuaRE).

PubMed

Duque-Ramos, Astrid; Boeker, Martin; Jansen, Ludger; Schulz, Stefan; Iniesta, Miguela; Fernández-Breis, Jesualdo Tomás

2014-01-01

To (1) evaluate the GoodOD guideline for ontology development by applying the OQuaRE evaluation method and metrics to the ontology artefacts that were produced by students in a randomized controlled trial, and (2) informally compare the OQuaRE evaluation method with gold standard and competency questions based evaluation methods, respectively. In the last decades many methods for ontology construction and ontology evaluation have been proposed. However, none of them has become a standard and there is no empirical evidence of comparative evaluation of such methods. This paper brings together GoodOD and OQuaRE. GoodOD is a guideline for developing robust ontologies. It was previously evaluated in a randomized controlled trial employing metrics based on gold standard ontologies and competency questions as outcome parameters. OQuaRE is a method for ontology quality evaluation which adapts the SQuaRE standard for software product quality to ontologies and has been successfully used for evaluating the quality of ontologies. In this paper, we evaluate the effect of training in ontology construction based on the GoodOD guideline within the OQuaRE quality evaluation framework and compare the results with those obtained for the previous studies based on the same data. Our results show a significant effect of the GoodOD training over developed ontologies by topics: (a) a highly significant effect was detected in three topics from the analysis of the ontologies of untrained and trained students; (b) both positive and negative training effects with respect to the gold standard were found for five topics. The GoodOD guideline had a significant effect over the quality of the ontologies developed. Our results show that GoodOD ontologies can be effectively evaluated using OQuaRE and that OQuaRE is able to provide additional useful information about the quality of the GoodOD ontologies.

Liver phantom for quality control and training in nuclear medicine

NASA Astrophysics Data System (ADS)

Lima Ferreira, Fernanda Carla; Souza, Divanizia do Nascimento

2011-10-01

In nuclear medicine, liver scintigraphy aims to verify organ function based on the radionuclide concentration in the liver and bile flow and is also used to detect tumors. Therefore it is necessary to perform quality control tests in the gamma camera before running the exam to prevent false results. Quality control tests of the gamma camera should thus be performed before running the exam to prevent false results. Such tests generally use radioactive material inside phantoms for evaluation of gamma camera parameters in quality control procedures. Phantoms can also be useful for training doctors and technicians in nuclear medicine procedures. The phantom proposed here has artifacts that simulate nodules; it may take on different quantities, locations and sizes and it may also be mounted without the introduction of nodules. Thus, its images may show hot or cold nodules or no nodules. The phantom consists of acrylic plates hollowed out in the centre, with the geometry of an adult liver. Images for analyses of simulated liver scintigraphy were obtained with the detector device at 5 cm from the anterior surface of the phantom. These simulations showed that this object is suitable for quality control in nuclear medicine because it was possible to visualize artifacts larger than 7.9 mm using a 256×256 matrix and 1000 kcpm. The phantom constructed in this work will also be useful for training practitioners and technicians in order to prevent patients from repeat testing caused by error during examinations.

Environmental Assessment: Construct POV Parking Lot Main Gate-Separated at Grand Forks AFB, North Dakota

DTIC Science & Technology

2004-09-01

water quality could be degraded, both in the short-term, during actual construction, and over the long-term due to reduced storm water quality caused by...due to reduced storm water quality caused by the increase of 37 paved area. The short-term effects come from possible erosion contributing to...construction, and over the long-term due to reduced storm water quality caused by the increase of paved area. The short-term effects come from

[Investigation on pattern of quality control for Chinese materia medica based on famous-region drug and bioassay--the work reference].

PubMed

Yan, Dan; Xiao, Xiaohe

2011-05-01

Selection and standardization of the work reference are the technical issues to be faced with in the bioassay of Chinese materia medica. Taking the bioassay of Coptis chinensis. as an example, the manufacture process of the famous-region drugs extraction was explained from the aspects of original identification, routine examination, component analysis and bioassay. The common technologies were extracted, and the selection and standardization procedures of the work reference for the bioassay of Chinese materia medica were drawn up, so as to provide technical support for constructing a new mode and method of the quality control of Chinese materia medica based on the famous-region drugs and bioassay.

Printing quality control automation

NASA Astrophysics Data System (ADS)

Trapeznikova, O. V.

2018-04-01

One of the most important problems in the concept of standardizing the process of offset printing is the control the quality rating of printing and its automation. To solve the problem, a software has been developed taking into account the specifics of printing system components and the behavior in printing process. In order to characterize the distribution of ink layer on the printed substrate the so-called deviation of the ink layer thickness on the sheet from nominal surface is suggested. The geometric data construction the surface projections of the color gamut bodies allows to visualize the color reproduction gamut of printing systems in brightness ranges and specific color sectors, that provides a qualitative comparison of the system by the reproduction of individual colors in a varying ranges of brightness.

Diagnosis of the Computer-Controlled Milling Machine, Definition of the Working Errors and Input Corrections on the Basis of Mathematical Model

NASA Astrophysics Data System (ADS)

Starikov, A. I.; Nekrasov, R. Yu; Teploukhov, O. J.; Soloviev, I. V.; Narikov, K. A.

2016-10-01

Manufactures, machinery and equipment improve of constructively as science advances and technology, and requirements are improving of quality and longevity. That is, the requirements for surface quality and precision manufacturing, oil and gas equipment parts are constantly increasing. Production of oil and gas engineering products on modern machine tools with computer numerical control - is a complex synthesis of technical and electrical equipment parts, as well as the processing procedure. Technical machine part wears during operation and in the electrical part are accumulated mathematical errors. Thus, the above-mentioned disadvantages of any of the following parts of metalworking equipment affect the manufacturing process of products in general, and as a result lead to the flaw.

Gender Differences in the Structure of Marital Quality.

PubMed

Beam, Christopher R; Marcus, Katherine; Turkheimer, Eric; Emery, Robert E

2018-05-01

Marriages consist of shared experiences and interactions between husbands and wives that may lead to different impressions of the quality of the relationship. Few studies, unfortunately, have tested gender differences in the structure of marital quality, and even fewer studies have evaluated whether genetic and environmental influences on marital quality differ across gender. In this study, we evaluated gender differences in the structure of marital quality using independent samples of married male (n = 2406) and married female (n = 2215) participants from the National Survey of Midlife Development in the United States who provided ratings on twenty-eight marital quality items encompassing six marital quality constructs. We further explored gender differences in genetic and environmental influences on marital quality constructs in a subsample of 491 pairs of twins. Results suggest partial metric invariance across gender but structural variability in marital quality constructs. Notably, correlations between constructs were stronger in women than men. Results also support gender differences in the genetic and environmental influences on different aspects of marital quality. We discuss that men and women may approach and react to marriage differently as the primary reason why we observed differences in the structure of marital quality.

Data collected to support monitoring of constructed emergent sandbar habitat on the Missouri River downstream from Gavins Point Dam, South Dakota and Nebraska, 2004-06

USGS Publications Warehouse

Thompson, Ryan F.; Johnson, Michaela R.; Andersen, Michael J.

2007-01-01

The U.S. Army Corps of Engineers has constructed emergent sandbar habitat on sections of the Missouri River bordering South Dakota and Nebraska downstream from Gavins Point Dam to create and enhance habitat for threatened and endangered bird species. Two areas near river miles 761.3 and 769.8 were selected for construction of emergent sandbar habitat. Pre- and postconstruction data were collected by the U.S. Geological Survey, in cooperation with the U.S. Army Corps of Engineers, to evaluate the success of the habitat management techniques. Data collected include pre- and postconstruction channel-geometry data (bathymetric and topographic) for areas upstream from, downstream from, and within each construction site. Water-velocity data were collected for selected parts of the site near river mile 769.8. Instruments and methods used in data collection, as well as quality-assurance and quality-control measures, are described. Geospatial channel-geometry data are presented for transects of the river channel as cross sections and as geographical information system shapefiles. Geospatial land-surface elevation data are provided for part of each site in the form of a color-shaded relief map. Geospatial water-velocity data also are provided as color-shaded maps and geographical information system shapefiles.

An engineering approach to controlling indoor air quality.

PubMed

Woods, J E

1991-11-01

Evidence is accumulating that indicates air quality problems in residential and commercial buildings are nearly always associated with inadequacies in building design and methods of operation. Thus, the very systems depended on to control the indoor environment can become indirect sources of contamination if diligence is not exercised at each stage of a building's life: a) planning and design, b) construction and commissioning, c) operation, and d) demolition or renovation. In this paper, an engineering perspective is presented in which the existing building stock is characterized in terms of its environmental performance. Preliminary data indicate that 20 to 30% of the existing buildings have sufficient problems to manifest as sick-building syndrome or building-related illness, while another 10 to 20% may have undetected problems. Thus, only about 50 to 70% of the existing buildings qualify as healthy buildings. Two methods and three mechanisms of control are described to achieve "acceptable" indoor air quality: source control and exposure control. If sources cannot be removed, some level of occupant exposure will result. To control exposures with acceptable values, the primary sensory receptors of the occupants (i.e., thermal, ocular, auditory, and olfactory) cannot be excessively stimulated. The three exposure control mechanisms are conduction, radiation, and convection. To achieve acceptable occupant responses, it is often practical to integrate the mechanisms of radiation and convection in heating, ventilating, and air conditioning systems that are designed to provide acceptable thermal, acoustic, and air quality conditions within occupied spaces.(ABSTRACT TRUNCATED AT 250 WORDS)

An engineering approach to controlling indoor air quality.

PubMed Central

Woods, J E

1991-01-01

Evidence is accumulating that indicates air quality problems in residential and commercial buildings are nearly always associated with inadequacies in building design and methods of operation. Thus, the very systems depended on to control the indoor environment can become indirect sources of contamination if diligence is not exercised at each stage of a building's life: a) planning and design, b) construction and commissioning, c) operation, and d) demolition or renovation. In this paper, an engineering perspective is presented in which the existing building stock is characterized in terms of its environmental performance. Preliminary data indicate that 20 to 30% of the existing buildings have sufficient problems to manifest as sick-building syndrome or building-related illness, while another 10 to 20% may have undetected problems. Thus, only about 50 to 70% of the existing buildings qualify as healthy buildings. Two methods and three mechanisms of control are described to achieve "acceptable" indoor air quality: source control and exposure control. If sources cannot be removed, some level of occupant exposure will result. To control exposures with acceptable values, the primary sensory receptors of the occupants (i.e., thermal, ocular, auditory, and olfactory) cannot be excessively stimulated. The three exposure control mechanisms are conduction, radiation, and convection. To achieve acceptable occupant responses, it is often practical to integrate the mechanisms of radiation and convection in heating, ventilating, and air conditioning systems that are designed to provide acceptable thermal, acoustic, and air quality conditions within occupied spaces.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:1821369

Promoting Quality in NAVFAC (Naval Facilities Engineering Command) Construction.

DTIC Science & Technology

1986-01-01

experience. Inspector Checklists To assist their field construction engineers, Owens - Corning Fiberglas Corporation, in conjunction with Texas A&M...that developed by Owens - Corning Fiberglas A I Corporation to assist government inspectors to maintain high - quality standards in their construction...105, No. C03 (September 1979), 187-199. Information in a letter to the author from D.R. Eberts, Quality Assurance Engineer, Owens - Corning Fiberglas

Environmental Impact Analysis Process. Preliminary Draft Environmental Impact Statement. Construction and Operation of Space Launch Complex 7. Volume 2. Appendices.

DTIC Science & Technology

1989-03-15

non -point source pollution managementprograms, and implement controls to improve water quality. Controls should be implemented for any project...Businesses or other for- Vandenberg AFB, and the launching of on the proposed information collection profit, non -profit institutions Ithe Titan Centaur. In...communications. The Titan Centaur launch vehicle is a modified Titan 34D designed to deliver a payload of up to U 32,000 pounds directly into polar orbit from VAFB

Ecological studies related to the construction of the Defense Waste Processing Facility on the Savannah River Site. Annual report, FY-1991 and FY-1992

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scott, D.E.; Chazel, A.C.; Pechmann, J.H.K.

1993-06-01

The Defense Waste Processing Facility (DWPF) was built on the Savannah River Site (SRS) during the mid-1980`s. The Savannah River Ecology Laboratory (SREL) has completed 14 years of ecological studies related to the construction of the DWPF complex. Prior to construction, the 600-acre site (S-Area) contained a Carolina bay and the headwaters of a stream. Research conducted by the SREL has focused primarily on four questions related to these wetlands: (1) Prior to construction, what fauna and flora were present at the DWPF site and at similar, yet undisturbed, alternative sites? (2) By comparing the Carolina bay at the DWPFmore » site (Sun Bay) with an undisturbed control Carolina bay (Rainbow Bay), what effect is construction having on the organisms that inhabited the DWPF site? (3) By comparing control streams with streams on the periphery of the DWPF site, what effect is construction having on the peripheral streams? (4) How effective have efforts been to lessen the impacts of construction, both with respect to erosion control measures and the construction of ``refuge ponds`` as alternative breeding sites for amphibians that formerly bred at Sun Bay? Through the long-term census-taking of biota at the DWPF site and Rainbow Bay, SREL has begun to evaluate the impact of construction on the biota and the effectiveness of mitigation efforts. Similarly, the effects of erosion from the DWPF site on the water quality of S-Area peripheral streams are being assessed. This research provides supporting data relevant to the National Environmental Policy Act (NEPA) of 1969, the Endangered Species Act of 1973, Executive Orders 11988 (Floodplain Management) and 11990 (Protection of Wetlands), and United States Department of Energy (DOE) Guidelines for Compliance with Floodplain/Wetland Environmental Review Requirements (10 CFR 1022).« less

78 FR 25482 - Notice of Revised Determination on Reconsideration

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-01

...-PROGRESSIVE SOFTWARE COMPUTING, QUALITY TESTING SERVICES, INC., RAILROAD CONSTRUCTION CO. OF SOUTH JERSEY, INC..., LP, PSCI- Progressive Software Computing, Quality Testing Services, Inc., Railroad Construction Co..., ANDERSON CONSTRUCTION SERVICES, BAKER PETROLITE, BAKERCORP, BELL-FAST FIRE PROTECTION INC., BOLTTECH INC...

The use of a non-nuclear density gauge for monitoring the compaction process of asphalt pavement

NASA Astrophysics Data System (ADS)

Van den bergh, Wim; Vuye, Cedric; Kara, Patricia; Couscheir, Karolien; Blom, Johan; Van Bouwel, Philippe

2017-09-01

The mechanical performance of an asphalt pavement affects its durability - thus carbon footprint. Many parameters contribute to the success of a durable asphalt mix, e.g. material selection, an accurate mix and even the road design in which the asphalt mix quality is quantified. The quality of the asphalt mix, by its mechanical properties, is also related to the compaction degree. However, and specifically for high volume rates, the laying process at the construction site needs an effective method to monitor and adjust immediately the compaction quality before cooling and without damaging the layer, which is now absent. In this paper the use of a non-nuclear density gauge (PQI - Pavement Quality Indicator) is evaluated, based on a site at Brussels Airport. Considering the outcome of the present research, this PQI is advised as a unique tool for continuous density measurements and allow immediate adjustments during compaction, and decreases the number of core drilling for quality control, and as a posteriori asphalt pavement density test where cores are prohibited. The use of PQI could be recommended to be a part of the standard quality control process in the Flemish region.

HadISD: a quality-controlled global synoptic report database for selected variables at long-term stations from 1973-2011

NASA Astrophysics Data System (ADS)

Dunn, R. J. H.; Willett, K. M.; Thorne, P. W.; Woolley, E. V.; Durre, I.; Dai, A.; Parker, D. E.; Vose, R. S.

2012-10-01

This paper describes the creation of HadISD: an automatically quality-controlled synoptic resolution dataset of temperature, dewpoint temperature, sea-level pressure, wind speed, wind direction and cloud cover from global weather stations for 1973-2011. The full dataset consists of over 6000 stations, with 3427 long-term stations deemed to have sufficient sampling and quality for climate applications requiring sub-daily resolution. As with other surface datasets, coverage is heavily skewed towards Northern Hemisphere mid-latitudes. The dataset is constructed from a large pre-existing ASCII flatfile data bank that represents over a decade of substantial effort at data retrieval, reformatting and provision. These raw data have had varying levels of quality control applied to them by individual data providers. The work proceeded in several steps: merging stations with multiple reporting identifiers; reformatting to netCDF; quality control; and then filtering to form a final dataset. Particular attention has been paid to maintaining true extreme values where possible within an automated, objective process. Detailed validation has been performed on a subset of global stations and also on UK data using known extreme events to help finalise the QC tests. Further validation was performed on a selection of extreme events world-wide (Hurricane Katrina in 2005, the cold snap in Alaska in 1989 and heat waves in SE Australia in 2009). Some very initial analyses are performed to illustrate some of the types of problems to which the final data could be applied. Although the filtering has removed the poorest station records, no attempt has been made to homogenise the data thus far, due to the complexity of retaining the true distribution of high-resolution data when applying adjustments. Hence non-climatic, time-varying errors may still exist in many of the individual station records and care is needed in inferring long-term trends from these data. This dataset will allow the study of high frequency variations of temperature, pressure and humidity on a global basis over the last four decades. Both individual extremes and the overall population of extreme events could be investigated in detail to allow for comparison with past and projected climate. A version-control system has been constructed for this dataset to allow for the clear documentation of any updates and corrections in the future.

A modern approach to the authentication and quality assessment of thyme using UV spectroscopy and chemometric analysis.

PubMed

Gad, Haidy A; El-Ahmady, Sherweit H; Abou-Shoer, Mohamed I; Al-Azizi, Mohamed M

2013-01-01

Recently, the fields of chemometrics and multivariate analysis have been widely implemented in the quality control of herbal drugs to produce precise results, which is crucial in the field of medicine. Thyme represents an essential medicinal herb that is constantly adulterated due to its resemblance to many other plants with similar organoleptic properties. To establish a simple model for the quality assessment of Thymus species using UV spectroscopy together with known chemometric techniques. The success of this model may also serve as a technique for the quality control of other herbal drugs. The model was constructed using 30 samples of authenticated Thymus vulgaris and challenged with 20 samples of different botanical origins. The methanolic extracts of all samples were assessed using UV spectroscopy together with chemometric techniques: principal component analysis (PCA), soft independent modeling of class analogy (SIMCA) and hierarchical cluster analysis (HCA). The model was able to discriminate T. vulgaris from other Thymus, Satureja, Origanum, Plectranthus and Eriocephalus species, all traded in the Egyptian market as different types of thyme. The model was also able to classify closely related species in clusters using PCA and HCA. The model was finally used to classify 12 commercial thyme varieties into clusters of species incorporated in the model as thyme or non-thyme. The model constructed is highly recommended as a simple and efficient method for distinguishing T. vulgaris from other related species as well as the classification of marketed herbs as thyme or non-thyme. Copyright © 2013 John Wiley & Sons, Ltd.

Quality control in diagnostic immunohistochemistry: integrated on-slide positive controls.

PubMed

Bragoni, A; Gambella, A; Pigozzi, S; Grigolini, M; Fiocca, R; Mastracci, L; Grillo, F

2017-11-01

Standardization in immunohistochemistry is a priority in modern pathology and requires strict quality control. Cost containment has also become fundamental and auditing of all procedures must take into account both these principles. Positive controls must be routinely performed so that their positivity guarantees the appropriateness of the immunohistochemical procedure. The aim of this study is to develop a low cost (utilizing a punch biopsy-PB-tool) procedure to construct positive controls which can be integrated in the patient's tissue slide. Sixteen frequently used control blocks were selected and multiple cylindrical samples were obtained using a 5-mm diameter punch biopsy tool, separately re-embedding them in single blocks. For each diagnostic immunoreaction requiring a positive control, an integrated PB-control section (cut from the appropriate PB-control block) was added to the top right corner of the diagnostic slide before immunostaining. This integrated control technique permitted a saving of 4.75% in total direct lab costs and proved to be technically feasible and reliable. Our proposal is easy to perform and within the reach of all pathology labs, requires easily available tools, its application costs is less than using external paired controls and ensures that a specific control for each slide is always available.

Innovation and construction management in Brazil: Challenges of companies in times of quality and productivity

NASA Astrophysics Data System (ADS)

Barbosa, A. A. R.; Vilnītis, M.

2017-10-01

Considering the efforts to optimize productivity and quality in the construction through the potential existing in the respective companies, this study presents an approach for identification, management and priorities of improvements actions at construction sites focusing status on productivity, added value and innovation in the socioeconomic context and scenario of construction industry in Brazil. Technological advances in recent years have made the Brazilian construction industry gradually incorporate technologies and forms of management, despite its traditionally conservative character. In current days, the innovations are pursued with the quest for greater quality, productivity, safety and customer satisfaction, which have been increasingly competitive and global. Construction in Brazil occupies an important role in the economy, directly contributing to GDP and acting on an extensive productive chain of suppliers, commercialization services and maintenance. The Brazilian construction sector has undergone major changes in recent years, facilitated by factors such as the resumption of public investments, the creation of laws that facilitate real estate, investments and funding of external resources, and the efforts of the Brazilian Quality and Productivity Program - PBQP H. However, the sector faces problems of a lack of skilled labour to meet the growth needs of the sector. There are still problems and challenges of quality and productivity that prevent full sector development. The aspects of nonconformity, low quality, high tax burden, outsourcing and informality of the workforce have not been adequately addressed and resolved. Through the use of indicators of productivity and growth, the challenges of the Brazilian construction industry are discussed and the possible paths for the sector that allow its full development and to reduce the distance between the Brazilian construction industry and that of the developed countries.

Relationships between undergraduates' argumentation skills, conceptual quality of problem solutions, and problem solving strategies in introductory physics

NASA Astrophysics Data System (ADS)

Rebello, Carina M.

This study explored the effects of alternative forms of argumentation on undergraduates' physics solutions in introductory calculus-based physics. A two-phase concurrent mixed methods design was employed to investigate relationships between undergraduates' written argumentation abilities, conceptual quality of problem solutions, as well as approaches and strategies for solving argumentative physics problems across multiple physics topics. Participants were assigned via stratified sampling to one of three conditions (control, guided construct, or guided evaluate) based on gender and pre-test scores on a conceptual instrument. The guided construct and guided evaluate groups received tasks and prompts drawn from literature to facilitate argument construction or evaluation. Using a multiple case study design, with each condition serving as a case, interviews were conducted consisting of a think-aloud problem solving session paired with a semi-structured interview. The analysis of problem solving strategies was guided by the theoretical framework on epistemic games adapted by Tuminaro and Redish (2007). This study provides empirical evidence that integration of written argumentation into physics problems can potentially improve the conceptual quality of solutions, expand their repertoire of problem solving strategies and show promise for addressing the gender gap in physics. The study suggests further avenues for research in this area and implications for designing and implementing argumentation tasks in introductory college physics.

Enhancing the competitiveness of skilled construction workers through collaborative education and training

NASA Astrophysics Data System (ADS)

Dardiri, Ahmad; Sutrisno, Kuncoro, Tri; Ichwanto, Muhamad Aris; Suparji

2017-09-01

Professionalism of construction workers is one of the keys to the success of infrastructure development projects. The professionalism of the workforce is demonstrated through the possession of expertise competence certificate (SKA) and/or certificates of skills (SKT) issued formally through competency tests by the National Construction Cervices Development Agency (LPJKN). The magnitude of the national skilled manpower needs has not been able to meet the availability of professional workforce. Strategies to develop the quality of resources require sufficient information on the characteristics of the resources themselves, facilities, constraints, stakeholder support, regulations, and socioeconomic as well as cultural conditions. The problems faced by Indonesia in improving the competitiveness of skilled construction workers are (1) how the level of professionalism of skill workers in construction field, (2) what the constrains on improving the quality of skilled construction workers,and(3) how the appropriate model of education and training skillfull construction work. The study was designed with quantitative and qualitative approaches. Quantitative methods were used to describe the profile of sklill constructions worker. Qualitative methods were used toidentify constraintsin improving the qualityof skilled labor, as well as formulate a viable collaborative education and training model for improving the quality of skill labor. Data were collected by documentation, observation, and interview. The result of the study indicate theat (1) the professionalism knowledge of skilled constructions worker are in still low condition, (2) the constrain faced in developing the quality of skilled construction labor cover economic and structural constrains, and (3) collaborative eduction and training model can improve the quality ods skilld labor contructions.

Patients with haematological malignancies show a restricted body image focusing on function and emotion.

PubMed

Weber, C S; Fliege, H; Arck, P C; Kreuzer, K-A; Rose, M; Klapp, B F

2005-05-01

The diagnosis of cancer threatens the psychological and bodily integrity. Based on this assumption, we aimed to explore how newly diagnosed patients cope with special regard to the body image (BI). In total, 40 patients (32 haematological malignancies) were assessed by questionnaires on mood, complaints, self-regulation and quality of life (QOL). The BI was assessed by the 'Body Grid' which reveals the constructs patients choose to characterize the body. The constructs were categorized using a model of six predefined categories comprising: emotion, control, activity, strength, function and appearance. Tinnitus sufferers and medical students served as comparison groups. Cancer patients showed significantly more anxious depression and a significantly lower QOL than controls. Their BI was restricted, focusing the functional status of body organs (e.g. opposing healthy vs. ill organs) as well as emotional aspects (e.g. trust vs. fear). The data convey fundamental psychological distress in newly diagnosed cancer patients. Restriction of BI and use of functional constructs may help to buffer the threat to body integrity. The emotional constructs reflect the existential impact. The data give a clear indication for the need for early psychosocial support which should aim at stabilizing the psychological and bodily integrity of the patient.

Status of nanofabrication at King's College, London

NASA Astrophysics Data System (ADS)

Charalambous, P.

2003-03-01

Since the last X-ray microscopy conference (Berkeley, 1999) we have made considerable progress in all aspects of nanofabrication and more specifically on further optimisation of various aspects of Zone Plate construction and quality control. Here we report on some of these areas of improvement, as well as some of the more interesting ZPs fabricated recently and deployed at various beam lines world wide.

Biogeochemical cycling and chemical fluxes in a managed northern forested wetland, Michigan, USA

Treesearch

James McLaughlin; Emily Calhoon; Margaret Gale; Martin Jurgensen; Carl Trettin

2011-01-01

Forest harvesting and subsequent regeneration treatments may cause changes in soil and solution chemistry that adversely affect forest productivity and environmental quality. The objective of this study was to assess soil carbon (C), nitrogen (N), and base cation pools and fluxes, and to construct a hydrogen ion (H+) mass balance to identify major processes controlling...

No improvements in postnatal dietary outcomes were apparent in a two-arm, randomized, controlled, comparative impact trial targeting rural, Southern, African American women

USDA-ARS?s Scientific Manuscript database

Objective: The primary objective was to determine if postnatal diet quality scores of participants in the two treatment arms differed or changed over time. The secondary objectives were to determine if postnatal psychosocial constructs related to diet differed in the two treatment arms, changed ov...

Value Engineering. "A Working Tool for Cost Control in the Design of Educational Facilities."

ERIC Educational Resources Information Center

Lawrence, Jerry

Value Engineering (VE) is a cost optimizing technique used to analyze design quality and cost-effectiveness. The application of VE procedures to the design and construction of school facilities has been adopted by the state of Washington. By using VE, the optimum value for every life cycle dollar spent on a facility is obtained by identifying not…

Low-Quality Housing Is Associated With Increased Risk of Malaria Infection: A National Population-Based Study From the Low Transmission Setting of Swaziland

PubMed Central

Dlamini, Nomcebo; Ntshalintshali, Nyasatu; Pindolia, Deepa; Allen, Regan; Nhlabathi, Nomcebo; Novotny, Joseph; Kang Dufour, Mi-Suk; Midekisa, Alemayehu; Gosling, Roly; LeMenach, Arnaud; Cohen, Justin; Dorsey, Grant; Greenhouse, Bryan; Kunene, Simon

2017-01-01

Abstract Background. Low-quality housing may confer risk of malaria infection, but evidence in low transmission settings is limited. Methods. To examine the relationship between individual level housing quality and locally acquired infection in children and adults, a population-based cross-sectional analysis was performed using existing surveillance data from the low transmission setting of Swaziland. From 2012 to 2015, cases were identified through standard diagnostics in health facilities and by loop-mediated isothermal amplification in active surveillance, with uninfected subjects being household members and neighbors. Housing was visually assessed in a home visit and then classified as low, high, or medium quality, based on housing components being traditional, modern, or both, respectively. Results. Overall, 11426 individuals were included in the study: 10960 uninfected and 466 infected (301 symptomatic and 165 asymptomatic). Six percent resided in low-quality houses, 26% in medium-quality houses, and 68% in high-quality houses. In adjusted models, low- and medium-quality construction was associated with increased risk of malaria compared with high-quality construction (adjusted odds ratio [AOR], 2.11 and 95% confidence interval [CI], 1.26–3.53 for low vs high; AOR, 1.56 and 95% CI, 1.15–2.11 for medium vs high). The relationship was independent of vector control, which also conferred a protective effect (AOR, 0.67; 95% CI, .50–.90) for sleeping under an insecticide-treated bed net or a sprayed structure compared with neither. Conclusions. Our study adds to the limited literature on housing quality and malaria risk from low transmission settings. Housing improvements may offer an attractive and sustainable additional strategy to support countries in malaria elimination. PMID:28580365

Low-Quality Housing Is Associated With Increased Risk of Malaria Infection: A National Population-Based Study From the Low Transmission Setting of Swaziland.

PubMed

Dlamini, Nomcebo; Hsiang, Michelle S; Ntshalintshali, Nyasatu; Pindolia, Deepa; Allen, Regan; Nhlabathi, Nomcebo; Novotny, Joseph; Kang Dufour, Mi-Suk; Midekisa, Alemayehu; Gosling, Roly; LeMenach, Arnaud; Cohen, Justin; Dorsey, Grant; Greenhouse, Bryan; Kunene, Simon

2017-01-01

Low-quality housing may confer risk of malaria infection, but evidence in low transmission settings is limited. To examine the relationship between individual level housing quality and locally acquired infection in children and adults, a population-based cross-sectional analysis was performed using existing surveillance data from the low transmission setting of Swaziland. From 2012 to 2015, cases were identified through standard diagnostics in health facilities and by loop-mediated isothermal amplification in active surveillance, with uninfected subjects being household members and neighbors. Housing was visually assessed in a home visit and then classified as low, high, or medium quality, based on housing components being traditional, modern, or both, respectively. Overall, 11426 individuals were included in the study: 10960 uninfected and 466 infected (301 symptomatic and 165 asymptomatic). Six percent resided in low-quality houses, 26% in medium-quality houses, and 68% in high-quality houses. In adjusted models, low- and medium-quality construction was associated with increased risk of malaria compared with high-quality construction (adjusted odds ratio [AOR], 2.11 and 95% confidence interval [CI], 1.26-3.53 for low vs high; AOR, 1.56 and 95% CI, 1.15-2.11 for medium vs high). The relationship was independent of vector control, which also conferred a protective effect (AOR, 0.67; 95% CI, .50-.90) for sleeping under an insecticide-treated bed net or a sprayed structure compared with neither. Our study adds to the limited literature on housing quality and malaria risk from low transmission settings. Housing improvements may offer an attractive and sustainable additional strategy to support countries in malaria elimination. © The Author 2017. Published by Oxford University Press on behalf of Infectious Diseases Society of America.

Recommendations for Constructing Roadside Vegetation Barriers to Improve Near-Road Air Quality

EPA Pesticide Factsheets

The EPA report, Recommendations for Constructing Roadside Vegetation Barriers to Improve Near-Road Air Quality, summarizes the research findings on the best practices for building roadside vegetative barriers to improve air quality. This fact sheet describ

Establishing quality control ranges for antimicrobial susceptibility testing of Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus: a cornerstone to develop reference strains for Korean clinical microbiology laboratories.

PubMed

Hong, Sung Kuk; Choi, Seung Jun; Shin, Saeam; Lee, Wonmok; Pinto, Naina; Shin, Nari; Lee, Kwangjun; Hong, Seong Geun; Kim, Young Ah; Lee, Hyukmin; Kim, Heejung; Song, Wonkeun; Lee, Sun Hwa; Yong, Dongeun; Lee, Kyungwon; Chong, Yunsop

2015-11-01

Quality control (QC) processes are being performed in the majority of clinical microbiology laboratories to ensure the performance of microbial identification and antimicrobial susceptibility testing by using ATCC strains. To obtain these ATCC strains, some inconveniences are encountered concerning the purchase cost of the strains and the shipping time required. This study was focused on constructing a database of reference strains for QC processes using domestic bacterial strains, concentrating primarily on antimicrobial susceptibility testing. Three strains (Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus) that showed legible results in preliminary testing were selected. The minimal inhibitory concentrations (MICs) and zone diameters (ZDs) of eight antimicrobials for each strain were determined according to the CLSI M23. All resulting MIC and ZD ranges included at least 95% of the data. The ZD QC ranges obtained by using the CLSI method were less than 12 mm, and the MIC QC ranges extended no more than five dilutions. This study is a preliminary attempt to construct a bank of Korean QC strains. With further studies, a positive outcome toward cost and time reduction can be anticipated.

Accounting for quality in the measurement of hospital performance: evidence from Costa Rica.

PubMed

Arocena, Pablo; García-Prado, Ariadna

2007-07-01

This paper provides insights into how Costa Rican public hospitals responded to the pressure for increased efficiency and quality introduced by the reforms carried out over the period 1997-2001. To that purpose we compute a generalized output distance function by means of non-parametric mathematical programming to construct a productivity index, which accounts for productivity changes while controlling for quality of care. Our results show an improvement in hospital performance mainly driven by quality increases. The adoption of management contracts seems to have contributed to such enhancement, more notably for small hospitals. Further, productivity growth is primarily due to technical and scale efficiency change rather than technological change. A number of policy implications are drawn from these results. Copyright (c) 2006 John Wiley & Sons, Ltd.

Does integrated care lead to both improved service quality and lower care cost

PubMed Central

Waldeyer, Regina; Siegel, Achim; Daul, Gisela; Gaiser, Karin; Hildebrandt, Helmut; Köster, Ingrid; Schubert, Ingrid; Stunder, Brigitte; Stützle, Yvonne

2010-01-01

Purpose and context ‘Gesundes Kinzigtal’ is one of the few population-based integrated care approaches in Germany, organising care across all health service sectors and indications. The management company and its contracting partners (the physicians’ network in the region and two statutory health insurers) strive to reach a higher quality of care at a lower overall cost as compared with the German standard. During its first two years of operation (2006–2007), the Kinzigtal project achieved surprisingly positive financial results compared with its reference value. To gain independent evidence on the quality aspects of the system, the management company and its partners provided a remarkable budget for its evaluation by independent scientific institutions. Case description and data sources We will present interim results of a population-based controlled cohort study. In this study, quality of care is checked by relying on health and service quality indicators that have been constructed from health insurers’ administrative data (claims data). Interim results are presented for the intervention region (Kinzigtal area) and the control region (the rest of Baden-Württemberg, i.e., Southwest Germany). Preliminary conclusions and discussion The evaluation of ‘Gesundes Kinzigtal’ is in full progress. Until now, there is no evidence that the surprisingly positive financial results of the Kinzigtal system have been achieved at the expense of care quality. Rather, Gesundes Kinzigtal Integrated Care seems to be about to increasingly realize comparative advantages regarding health service quality (in comparison to the control region).

Construct Validity and Responsiveness of the Pediatric Quality of Life Inventory 4.0 Generic Core Scales and Infant Scales in the PICU.

PubMed

Aspesberro, François; Fesinmeyer, Megan D; Zhou, Chuan; Zimmerman, Jerry J; Mangione-Smith, Rita

2016-06-01

To assess the construct validity and the responsiveness of the Pediatric Quality of Life Inventory 4.0 Generic Core Scales and Infant Scales in the medical-surgical (PICU) and cardiac PICU. Prospective cohort study of 367 inpatients admitted either to the PICU or the cardiac ICU at Seattle Children's Hospital from January 2012 to June 2013. Parent/caregiver and child (≥ 8 yr old, developmentally appropriate, and critical illness resolved) Pediatric Quality of Life Inventory scores were obtained within 24 hours of PICU/cardiac ICU discharge and subsequently at 4-12 weeks following hospital discharge. Of the 491 eligible participants invited to participate, 367 (74.7% response rate) completed the Pediatric Quality of Life Inventory survey at ICU discharge, and of these, 263 (71.7% follow-up response rate) completed the follow-up survey 4-12 weeks after hospital discharge. Responsiveness was assessed by calculating improvement scores (difference between follow-up and ICU discharge scores, Δ Pediatric Quality of Life Inventory). Construct validity was examined by comparing mean improvement scores for known groups differing by medical complexity. At follow-up, [INCREMENT] Pediatric Quality of Life Inventory scores were as follows (mean ± SD): physical domain, 34.8 ± 32.0; and psychosocial domain, 23.1 ± 23.5. Patients with complex chronic or noncomplex chronic disease had physical functioning improvement scores that were 17.4 points (95% CI, -28.3 to -6.5; p < 0.001) and 19.5 points (95% CI, -30.4 to -8.5; p < 0.002) lower than children with no chronic illness, respectively. Patients with complex chronic disease exhibited psychosocial improvement scores that were 9.6 points (95% CI, -18.4 to -0.8; p < 0.033) lower than patients without chronic disease. Patients with noncomplex chronic disease had similar psychosocial improvement scores when compared with patients without chronic disease. As a measure of health-related quality of live, Pediatric Quality of Life Inventory demonstrated responsiveness and construct validity in a broad population of critically ill children. This measure represents a patient-centered clinically meaningful patient-or-parent-reported outcome measure for pediatric research assessing the clinical effectiveness of PICU/cardiac ICU interventions. When using health-related quality of life recovery as an outcome measure to assess clinical effectiveness in the PICU/cardiac ICU setting, measuring and controlling for the level of medical complexity is important in order to understand the true impact of clinical interventions.

A method for evaluating treatment quality using in vivo EPID dosimetry and statistical process control in radiation therapy.

PubMed

Fuangrod, Todsaporn; Greer, Peter B; Simpson, John; Zwan, Benjamin J; Middleton, Richard H

2017-03-13

Purpose Due to increasing complexity, modern radiotherapy techniques require comprehensive quality assurance (QA) programmes, that to date generally focus on the pre-treatment stage. The purpose of this paper is to provide a method for an individual patient treatment QA evaluation and identification of a "quality gap" for continuous quality improvement. Design/methodology/approach A statistical process control (SPC) was applied to evaluate treatment delivery using in vivo electronic portal imaging device (EPID) dosimetry. A moving range control chart was constructed to monitor the individual patient treatment performance based on a control limit generated from initial data of 90 intensity-modulated radiotherapy (IMRT) and ten volumetric-modulated arc therapy (VMAT) patient deliveries. A process capability index was used to evaluate the continuing treatment quality based on three quality classes: treatment type-specific, treatment linac-specific, and body site-specific. Findings The determined control limits were 62.5 and 70.0 per cent of the χ pass-rate for IMRT and VMAT deliveries, respectively. In total, 14 patients were selected for a pilot study the results of which showed that about 1 per cent of all treatments contained errors relating to unexpected anatomical changes between treatment fractions. Both rectum and pelvis cancer treatments demonstrated process capability indices were less than 1, indicating the potential for quality improvement and hence may benefit from further assessment. Research limitations/implications The study relied on the application of in vivo EPID dosimetry for patients treated at the specific centre. Sampling patients for generating the control limits were limited to 100 patients. Whilst the quantitative results are specific to the clinical techniques and equipment used, the described method is generally applicable to IMRT and VMAT treatment QA. Whilst more work is required to determine the level of clinical significance, the authors have demonstrated the capability of the method for both treatment specific QA and continuing quality improvement. Practical implications The proposed method is a valuable tool for assessing the accuracy of treatment delivery whilst also improving treatment quality and patient safety. Originality/value Assessing in vivo EPID dosimetry with SPC can be used to improve the quality of radiation treatment for cancer patients.

Statistical process control: separating signal from noise in emergency department operations.

PubMed

Pimentel, Laura; Barrueto, Fermin

2015-05-01

Statistical process control (SPC) is a visually appealing and statistically rigorous methodology very suitable to the analysis of emergency department (ED) operations. We demonstrate that the control chart is the primary tool of SPC; it is constructed by plotting data measuring the key quality indicators of operational processes in rationally ordered subgroups such as units of time. Control limits are calculated using formulas reflecting the variation in the data points from one another and from the mean. SPC allows managers to determine whether operational processes are controlled and predictable. We review why the moving range chart is most appropriate for use in the complex ED milieu, how to apply SPC to ED operations, and how to determine when performance improvement is needed. SPC is an excellent tool for operational analysis and quality improvement for these reasons: 1) control charts make large data sets intuitively coherent by integrating statistical and visual descriptions; 2) SPC provides analysis of process stability and capability rather than simple comparison with a benchmark; 3) SPC allows distinction between special cause variation (signal), indicating an unstable process requiring action, and common cause variation (noise), reflecting a stable process; and 4) SPC keeps the focus of quality improvement on process rather than individual performance. Because data have no meaning apart from their context, and every process generates information that can be used to improve it, we contend that SPC should be seriously considered for driving quality improvement in emergency medicine. Copyright © 2015 Elsevier Inc. All rights reserved.

Managing for Successful Control of Naturally Occurring Asbestos During Large Scale Grading

NASA Astrophysics Data System (ADS)

Saur, R.; Harnish, D.; Cavanaugh, J.; Kendall, K.; Virdee, A.; Ludlam, D.

2012-12-01

Pacific Gas and Electric Company recently completed environmental remediation and civil grading of a 35-acre site in San Francisco Bay Area, and the project became recognized with local agencies as having excellent controls systems for naturally-occurring asbestos (NOA). The project began in 2010 and was completed in 2012, and involved excavating and grading over 100,000 tons of soil containing NOA. The work was subject to requirements by state, local and regional agencies, including an asbestos dust mitigation plan for the Bay Area Air Quality Management District. Effective control of NOA is attributed to management approaches combined with effective monitoring and state-of-the-art controls. Management Planning. The contract for construction specified NOA compliance management and controls, including having a NOA-control "czar" ultimately responsible for effective mitigation. An important element was daily pre-planning for excavation/grading that involved both the NOA mitigation experts and construction staff. Personnel Planning and Training. All construction personnel were trained before work regarding NOA hazards and mitigations. Daily tailboards with all construction personnel included discussions of the NOA controls integral to the daily work. Supervision. A NOA mitigation compliance leader was assigned to each excavation operation, responsible for continuously monitoring wind direction and work to ensure mitigation met requirements, and that disturbed areas were hydrosealed or covered. Adaptive Management - Daily and weekly debriefs occurred with those responsible for NOA controls to evaluate effectiveness, and identify improvements needed. If a monitoring result exceeded the project trigger level, work shut down and a root-cause analysis was performed to determine appropriate corrective actions. Deviations of results from background were researched as to cause, and any adjustments identified. Nearby non-project activities were monitored, as they occasionally caused trigger level exceedences in perimeter monitors, including from off-site vehicles, nearby construction, and mechanical vegetation management (e.g. weed whacking). Regulatory and Owner Oversight. Monitoring results were reported daily to agencies, agencies made frequent inspections, and owner's independent compliance representatives observed the NOA mitigation and provided real-time feedback to the construction team. NOA Controls. NOA emissions were controlled site-wide and for each work activity. Site systems included misting, water trucks on roads, temporary covers and soil sealants. Work activity controls for excavation/grading included both source and perimeter controls. Water application technologies specially designed for NOA fiber mitigation, and not just dust mitigation, were effective without adding excessive water to work areas. These activities collectively created a management structure that facilitated successful implementation of NOA control technologies.

Quality and quantity of construction and demolition waste in Tehran.

PubMed

Asgari, Alireza; Ghorbanian, Tahereh; Yousefi, Nader; Dadashzadeh, Dariush; Khalili, Fatemeh; Bagheri, Amin; Raei, Mehdi; Mahvi, Amir Hossein

2017-01-01

In recent years the generation rate of construction and demolition waste (C&D) has significantly augmented. The aim of this study was to assessed the quality and quantity of construction and demolition waste in Tehran (capital of Iran). Questionnaire methods were used for estimating the amount of generated C&D wastes national statistical data and typical waste generation data. In order to defining the composition of C&D waste, trucks were randomly selected and their wastes were separated and weighted. According to obtained results, about 82,646,051 m 3 of C&D waste (average 16,529,210 m 3 per year) were generated during 2011 to 2016 which only about 26% of them has been recycled. Mixing sand and cement, concrete, broken bricks and soil have the highest amount of the composition of C&D waste in Tehran that was 30, 19, 18 and 11%, respectively. Based on the results, about 2,784,158 t of the waste will generate in 2025 and this is approximately 122% higher than wastes generate in 2016. Based on MAPSA's data, 360 teams of personnel cruise and control the illegal disposals, but due to the expansion of Tehran this number of teams is inadequate and can't be effective in controlling the situation. In general, the overall condition of C&D waste management in Tehran seems undesirable and needs to be updated based on the experience of successful countries in this field.

Diabetes Risk and Disease Management in Later Life: A National Longitudinal Study of the Role of Marital Quality

PubMed Central

Waite, Linda; Shen, Shannon

2016-01-01

Objectives: We assess the association between marital quality and both the risk of developing diabetes and the management of diabetes after its onset in later life. Method: We use data from the first two waves of the National Social Life, Health, and Aging Project to estimate regression models with lagged dependent variables. The sample includes 1,228 married respondents, among whom 389 were diabetic. Those with either a reported diagnosis or with HbA1c ≥ 6.5% are identified diabetic. We categorize diabetic respondents into three groups: controlled, undiagnosed, and uncontrolled diabetes. We conduct factor analysis to construct positive and negative marital quality scales. Results: For women, an increase in positive marital quality between Waves 1 and 2 is related to a lower risk of being diabetic at Wave 2, net of diabetes status at Wave 1; surprisingly, for men, an increase in negative marital quality between Waves 1 and 2 is related to both a lower risk of being diabetic at Wave 2 and a higher chance of controlling diabetes at Wave 2 after its onset. Discussion: Our results challenge the traditional assumption that negative marital quality is always detrimental to health and encourage family scholars to distinguish different sources and types of negative marital quality. PMID:27216861

A tool for estimating impact of construction quality on life cycle performance of pavements.

DOT National Transportation Integrated Search

2005-11-01

Almost every constructed road develops distresses randomly in different subsections of the pavement. One reason for the random development of distress is the variability in construction quality. As such the goal in this project is to devise a tool th...

Building America

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brad Oberg

2010-12-31

Builders generally use a 'spec and purchase' business management system (BMS) when implementing energy efficiency. A BMS is the overall operational and organizational systems and strategies that a builder uses to set up and run its company. This type of BMS treats building performance as a simple technology swap (e.g. a tank water heater to a tankless water heater) and typically compartmentalizes energy efficiency within one or two groups in the organization (e.g. purchasing and construction). While certain tools, such as details, checklists, and scopes of work, can assist builders in managing the quality of the construction of higher performancemore » homes, they do nothing to address the underlying operational strategies and issues related to change management that builders face when they make high performance homes a core part of their mission. To achieve the systems integration necessary for attaining 40% + levels of energy efficiency, while capturing the cost tradeoffs, builders must use a 'systems approach' BMS, rather than a 'spec and purchase' BMS. The following attributes are inherent in a systems approach BMS; they are also generally seen in quality management systems (QMS), such as the National Housing Quality Certification program: Cultural and corporate alignment, Clear intent for quality and performance, Increased collaboration across internal and external teams, Better communication practices and systems, Disciplined approach to quality control, Measurement and verification of performance, Continuous feedback and improvement, and Whole house integrated design and specification.« less

The Influence of Parental Control and Parent-Child Relational Qualities on Adolescent Internet Addiction: A 3-Year Longitudinal Study in Hong Kong

PubMed Central

Shek, Daniel T. L.; Zhu, Xiaoqin; Ma, Cecilia M. S.

2018-01-01

This study investigated how parental behavioral control, parental psychological control, and parent-child relational qualities predicted the initial level and rate of change in adolescent internet addiction (IA) across the junior high school years. The study also investigated the concurrent and longitudinal effects of different parenting factors on adolescent IA. Starting from the 2009/2010 academic year, 3,328 Grade 7 students (Mage = 12.59 ± 0.74 years) from 28 randomly selected secondary schools in Hong Kong responded on a yearly basis to a questionnaire measuring multiple constructs including socio-demographic characteristics, perceived parenting characteristics, and IA. Individual growth curve (IGC) analyses showed that adolescent IA slightly decreased during junior high school years. While behavioral control of both parents was negatively related to the initial level of adolescent IA, only paternal behavioral control showed a significant positive relationship with the rate of linear change in IA, suggesting that higher paternal behavioral control predicted a slower decrease in IA. In addition, fathers' and mothers' psychological control was positively associated with the initial level of adolescent IA, but increase in maternal psychological control predicted a faster drop in IA. Finally, parent-child relational qualities negatively and positively predicted the initial level and the rate of change in IA, respectively. When all parenting factors were considered simultaneously, multiple regression analyses revealed that paternal behavioral control and psychological control as well as maternal psychological control and mother-child relational quality were significant concurrent predictors of adolescent IA at Wave 2 and Wave 3. Regarding the longitudinal predicting effects, paternal psychological control and mother-child relational quality at Wave 1 were the two most robust predictors of later adolescent IA at Wave 2 and Wave 3. The above findings underscore the importance of the parent-child subsystem qualities in influencing adolescent IA in the junior high school years. In particular, these findings shed light on the different impacts of fathering and mothering which are neglected in the scientific literature. While the findings based on the levels of IA are consistent with the existing theoretical models, findings on the rate of change are novel. PMID:29765349

The Influence of Parental Control and Parent-Child Relational Qualities on Adolescent Internet Addiction: A 3-Year Longitudinal Study in Hong Kong.

PubMed

Shek, Daniel T L; Zhu, Xiaoqin; Ma, Cecilia M S

2018-01-01

This study investigated how parental behavioral control, parental psychological control, and parent-child relational qualities predicted the initial level and rate of change in adolescent internet addiction (IA) across the junior high school years. The study also investigated the concurrent and longitudinal effects of different parenting factors on adolescent IA. Starting from the 2009/2010 academic year, 3,328 Grade 7 students ( M age = 12.59 ± 0.74 years) from 28 randomly selected secondary schools in Hong Kong responded on a yearly basis to a questionnaire measuring multiple constructs including socio-demographic characteristics, perceived parenting characteristics, and IA. Individual growth curve (IGC) analyses showed that adolescent IA slightly decreased during junior high school years. While behavioral control of both parents was negatively related to the initial level of adolescent IA, only paternal behavioral control showed a significant positive relationship with the rate of linear change in IA, suggesting that higher paternal behavioral control predicted a slower decrease in IA. In addition, fathers' and mothers' psychological control was positively associated with the initial level of adolescent IA, but increase in maternal psychological control predicted a faster drop in IA. Finally, parent-child relational qualities negatively and positively predicted the initial level and the rate of change in IA, respectively. When all parenting factors were considered simultaneously, multiple regression analyses revealed that paternal behavioral control and psychological control as well as maternal psychological control and mother-child relational quality were significant concurrent predictors of adolescent IA at Wave 2 and Wave 3. Regarding the longitudinal predicting effects, paternal psychological control and mother-child relational quality at Wave 1 were the two most robust predictors of later adolescent IA at Wave 2 and Wave 3. The above findings underscore the importance of the parent-child subsystem qualities in influencing adolescent IA in the junior high school years. In particular, these findings shed light on the different impacts of fathering and mothering which are neglected in the scientific literature. While the findings based on the levels of IA are consistent with the existing theoretical models, findings on the rate of change are novel.

Experience with modified aerospace reliability and quality assurance method for wind turbines

NASA Technical Reports Server (NTRS)

Klein, W. E.

1982-01-01

The SR&QA approach assures that the machine is not hazardous to the public or operating personnel, can operate unattended on a utility grid, demonstrates reliability operation, and helps establish the quality assurance and maintainability requirements for future wind turbine projects. The approach consisted of modified failure modes and effects analysis (FMEA) during the design phase, minimal hardware inspection during parts fabrication, and three simple documents to control activities during machine construction and operation. Five years experience shows that this low cost approach works well enough that it should be considered by others for similar projects.

Development of Methodology and Technology for Identifying and Quantifying Emission Products from Open Burning and Open Detonation Thermal Treatment Methods. Field Test Series A, B, and C. Volume 2, Part A. Quality Assurance and Quality Control

DTIC Science & Technology

1992-01-01

instrument logbook was maintained, but all calibration printouts for the SFC/MS were put in a dedicated loose- leaf notebook. The temperature of the...to-date temperature - monitoring sheets were located at the freezer. Each worker maintained a project-specific personal logbook to enter data...driven 10-cm-diameter gate valve into a 1.5-m3 carbon-impregnated polyethylene ( Velostat 7") sampling bag. The bag, constructed of electrically

Recent water quality trends in a typical semi-arid river with a sharp decrease in streamflow and construction of sewage treatment plants

NASA Astrophysics Data System (ADS)

Cheng, Peng; Li, Xuyong; Su, Jingjun; Hao, Shaonan

2018-01-01

Identification of the interactive responses of water quantity and quality to changes in nature and human stressors is important for the effective management of water resources. Many studies have been conducted to determine the influence of these stressors on river discharge and water quality. However, there is little information about whether sewage treatment plants can improve water quality in a region where river streamflow has decreased sharply. In this study, a seasonal trend decomposition method was used to analyze long-term (1996-2015) and seasonal trends in the streamflow and water quality of the Guanting Reservoir Basin, which is located in a semi-arid region of China. The results showed that the streamflow in the Guanting Reservoir Basin decreased sharply from 1996-2000 due to precipitation change and human activities (human use and reservoir regulation), while the streamflow decline over the longer period of time (1996-2015) could be attributed to human activities. During the same time, the river water quality improved significantly, having a positive relationship with the capacity of wastewater treatment facilities. The water quality in the Guanting Reservoir showed a deferred response to the reduced external loading, due to internal loading from sediments. These results implied that for rivers in which streamflow has declined sharply, the water quality could be improved significantly by actions to control water pollution control. This study not only provides useful information for water resource management in the Guanting Reservoir Basin, but also supports the implementation of water pollution control measures in other rivers with a sharp decline in streamflow.

The role of laser technology in materials processing and nondestructive testing in the 21st century

NASA Astrophysics Data System (ADS)

Sheinberg, B. M.

Some of the potential applications of laser technology in the 21st century are explored, and the proposed role of this technology in relation to materials processing, nondestructive testing, and quality control are discussed. Examples illustrating the implementation of this techology include the proposed construction of vehicles and platforms in near and deep space, and construction of underwater platforms. The direction in which today's technology should evolve to pursue the achievement of such goals is indicated. Included in the discussion is an evaluation of laser, robotics, and fiber optics technologies with respect to their ability to achieve a synergistic level of operation.

An improved plating process

NASA Technical Reports Server (NTRS)

Askew, John C.

1994-01-01

An alternative to the immersion process for the electrodeposition of chromium from aqueous solutions on the inside diameter (ID) of long tubes is described. The Vessel Plating Process eliminates the need for deep processing tanks, large volumes of solutions, and associated safety and environmental concerns. Vessel Plating allows the process to be monitored and controlled by computer thus increasing reliability, flexibility and quality. Elimination of the trivalent chromium accumulation normally associated with ID plating is intrinsic to the Vessel Plating Process. The construction and operation of a prototype Vessel Plating Facility with emphasis on materials of construction, engineered and operational safety and a unique system for rinse water recovery are described.

CF60 Concrete Composition Design and Application on Fudiankou Xijiang Super Large Bridge

NASA Astrophysics Data System (ADS)

Qiu, Yi Mei; Wen, Sen Yuan; Chen, Jun Xiang

2018-06-01

Guangxi Wuzhou City Ring Road Fudiankou Xijiang super large bridge CF60 concrete is a new multi-phase composite high-performance concrete, this paper for the Fudiankou Xijiang bridge structure and characteristics of the project, in accordance with the principle of local materials and technical specification requirements, combined with the site conditions of CF60 engineering high performance concrete component materials, proportion and the technical performance, quantify the main physical and mechanical performance index. Analysis main influencing factors of the technical indicators, reasonable adjustment of concrete mix design parameters, and the use of technical means of admixture and multi-function composite admixture of concrete, obtain the optimal proportion of good work, process, mechanical properties stability and durability of engineering properties, recommend and verification of concrete mix; to explore the CF60 high performance concrete Soil in the Fudiankou Xijiang bridge application technology, detection and tracking the quality of concrete construction, concrete structure during the construction of the key technology and control points is proposed, evaluation of CF60 high performance concrete in the actual engineering application effect and benefit to ensure engineering quality of bridge structure and service life, and super long span bridge engineering construction to provide basis and reference.

Leishmaniasis sand fly vector density reduction is less marked in destitute housing after insecticide thermal fogging.

PubMed

Chaves, Luis Fernando; Calzada, Jose E; Rigg, Chystrie; Valderrama, Anayansi; Gottdenker, Nicole L; Saldaña, Azael

2013-06-06

Insecticide thermal fogging (ITF) is a tool to control vector borne diseases. Insecticide application success for vector control has been associated with housing materials and architecture. Vector abundance is correlated with weather changes. Nevertheless, housing quality and weather impacts on vector abundance have been unaccounted for in most New World insecticide control trials for leishmaniasis vectors. We conducted a 15 month insecticide control trial that included two deltamethrin [6 mg a.i.m-2] based ITF interventions in 12 of 24 monitored houses at Trinidad de Las Minas, a hyperendemic cutaneous leishmaniasis transmission village in western Panamá. During the study we followed sand fly (SF) abundance, keeping track of rainfall and quantified housing quality using an index based on architecture and construction materials. We found a 50 to 80% reduction in SF density in the fogged houses when compared with control houses, while controlling for seasonal changes in SF abundance associated with rainfall. We found heterogeneities in the reductions, as abundance changed according to SF species: Lutzomyia gomezi, Lu. panamensis, Lu. dysponeta and Lu. triramula reduced in density between 40% and 90% after ITF. In contrast, Lu. trapidoi density increased 5% after ITF. Differences in the impact of ITF were associated with housing quality, the most destitute houses, i.e., those with features that ease insect entrance, had a disproportionally larger SF abundance, in some cases with increased domiciliary SF density following the ITF. Our results suggest the potential of insecticide application to control SF density and leishmaniasis transmission could depend on housing quality beyond insecticide efficiency.

Inverse simulation system for evaluating handling qualities during rendezvous and docking

NASA Astrophysics Data System (ADS)

Zhou, Wanmeng; Wang, Hua; Thomson, Douglas; Tang, Guojin; Zhang, Fan

2017-08-01

The traditional method used for handling qualities assessment of manned space vehicles is too time-consuming to meet the requirements of an increasingly fast design process. In this study, a rendezvous and docking inverse simulation system to assess the handling qualities of spacecraft is proposed using a previously developed model-predictive-control architecture. By considering the fixed discrete force of the thrusters of the system, the inverse model is constructed using the least squares estimation method with a hyper-ellipsoidal restriction, the continuous control outputs of which are subsequently dispersed by pulse width modulation with sensitivity factors introduced. The inputs in every step are deemed constant parameters, and the method could be considered as a general method for solving nominal, redundant, and insufficient inverse problems. The rendezvous and docking inverse simulation is applied to a nine-degrees-of-freedom platform, and a novel handling qualities evaluation scheme is established according to the operation precision and astronauts' workload. Finally, different nominal trajectories are scored by the inverse simulation and an established evaluation scheme. The scores can offer theoretical guidance for astronaut training and more complex operation missions.

Exploration of the Mechanisms of Change in Constructs From Self-Determination Theory and Quality of Life During a Multidisciplinary Family-Based Intervention for Overweight Adolescents.

PubMed

Fenner, Ashley A; Howie, Erin K; Straker, Leon M; Hagger, Martin S

2016-02-01

The current study explored whether a multidisciplinary family-based intervention underpinned by self-determination theory could enhance perceptions of parent need support, autonomous motivation, and quality of life in overweight and obese adolescents. Using a staggered-entry waitlist-period control design, adolescents (n = 56) were assessed at baseline and preintervention (within-participant control), immediately following intervention, and at 3, 6, and 12 month follow-ups. Parents were trained in need-supportive behaviors within the broader context of an 8-week multidisciplinary intervention attended jointly with adolescents. Following intervention, significant improvements were demonstrated in adolescent perceptions of parent need support, autonomous motivation, and quality of life, and changes were maintained at the 1-year follow-up. Mediation analyses revealed changes in perceptions of parent need support predicted changes in quality of life indirectly via changes in autonomous motivation. Findings suggest overweight and obese adolescents are likely to benefit from multidisciplinary family-based interventions that aim to train parents in need-supportive behaviors.

Measuring Air Quality in a Construction Site Biotope Using the AQM-65 Analyser

NASA Astrophysics Data System (ADS)

Ioana-Alina, Creţan; Nicoleta, Nemeș

2017-10-01

Activities related to the execution of construction works often exert pressure on the quality of environmental factors in adjacent habitat. In various stages of realization of the works if is the opening of the building site and access roads, borrow pits and the storage, or the construction itself, all the related activities will cause harm in various degrees of vegetation on the construction site and its surroundings. Large areas are rendered non-productive and, although they should be restored for use in the same place or elsewhere, sometimes they can lose their natural habitat baseline. The paper is presenting a case study of air quality monitoring using the AQM 65 analyser for a construction site located near Timisoara locality, Timis County, Romania.

Examining the Factor Structure and Hierarchical Nature of the Quality of Life Construct

ERIC Educational Resources Information Center

Wang, Mian; Schalock, Robert L.; Verdugo, Miguel A.; Jenaro, Christina

2010-01-01

There is considerable debate in the area of individual quality of life research regarding the factor structure and hierarchical nature of the quality of life construct. Our purpose in this study was to test via structural equation modeling an a priori quality of life model consisting of eight first-order factors and one second-order factor. Data…

A STUDY ON THE HIERARCHY OF MANAGEMENT ELEMENTS

NASA Astrophysics Data System (ADS)

Suzuki, Nobuyuki; Watanabe, Tadashi

Compared to the late 20th century, the Japanese construction industry has drastically changed its business methodology, outlook and approach in response to global issues and the incredible advances in technology. Such influences, non-exhaustively include the; WTO Government procurement agreement, updating conditions of tendering and contracting, client demands for cost reduction and the rapid penetration of ICT (Information and Communication Technology) into modern society. These days, the significance of controlling Quality, Cost and Time (the so-called QCT) has been recognized as an eternal-triangle by almost all countries, Government organizations and the private sector. However, as the construction industry is exposed to , and influenced by, more and more internal and external dynamic factors, continued reliance on managing and controlling QCT elements on their own is no longer adequate in meeting the growing demands and expectations, and as such control of additional management elements is now essential to avoid problems, or minimize their potential impacts should they occur. This paper utilizes the results of a survey carried out amongst construction managers and consultants in Japan and overseas to develop a spatial network that defines the interaction of management factors as a weighted graphical model. The calculated closeness centrality index of the developed management network model is adopted to identify the initialelement hierarchy, which is then further analyzed using the minimum distance of independent relationships of management elements (Warshall-Floyd algorism methodology), to identify the optimum potential hierarchy for effective construction management. A key result of the analysis is the significance of "Human Resource" in the construction industry management element hierarchy alongside the traditional QCT elements.

Auditing of suppliers as the requirement of quality management systems in construction

NASA Astrophysics Data System (ADS)

Harasymiuk, Jolanta; Barski, Janusz

2017-07-01

The choice of a supplier of construction materials can be important factor of increase or reduction of building works costs. Construction materials present from 40 for 70% of investment task depending on kind of works being provided for realization. There is necessity of estimate of suppliers from the point of view of effectiveness of construction undertaking and necessity from the point of view of conformity of taken operation by executives of construction job and objects within the confines of systems of managements quality being initiated in their organizations. The estimate of suppliers of construction materials and subexecutives of special works is formal requirement in quality management systems, which meets the requirements of the ISO 9001 standard. The aim of this paper is to show possibilities of making use of anaudit for estimate of credibility and reliability of the supplier of construction materials. The article describes kinds of audits, that were carried in quality management systems, with particular taking into consideration audits called as second-site. One characterizes the estimate criterions of qualitative ability and method of choice of the supplier of construction materials. The paper shows also propositions of exemplary questions, that would be estimated in audit process, the way of conducting of this estimate and conditionality of estimate.

The genetic control of milling yield, dough rheology and baking quality of wheat.

PubMed

Kuchel, H; Langridge, P; Mosionek, L; Williams, K; Jefferies, S P

2006-05-01

Improving the end-use quality of wheat is a key target for many breeding programmes. With the exception of the relationship between glutenin alleles and some dough rheological characters, knowledge concerning the genetic control of wheat quality traits is somewhat limited. A doubled haploid population produced from a cross between two Australian cultivars 'Trident' and 'Molineux' has been used to construct a linkage map based largely on microsatellite molecular makers. 'Molineux' is superior to 'Trident' for a number of milling, dough rheology and baking quality characteristics, although by international standards 'Trident' would still be regarded as possessing moderately good end-use quality. This population was therefore deemed useful for investigation of wheat end-use quality. A number of significant QTL identified for dough rheological traits mapped to HMW and LMW glutenin loci on chromosomes 1A and 1B. However, QTL associated with dough strength and loaf volume were also identified on chromosome 2A and a significant QTL associated with loaf volume and crumb quality was identified on chromosome 3A. A QTL for flour protein content and milling yield was identified on chromosome 6A and a QTL associated with flour colour reported previously on chromosome 7B was confirmed in this population. The detection of loci affecting dough strength, loaf volume and flour protein content may provide fresh opportunities for the application of marker-assisted selection to improve bread-making quality.

Environmental Assessment (EA): Proposed Missile Storage Improvements, Utah Test and Training Range

DTIC Science & Technology

2013-06-11

Implementation Plan SOC Species of Concern SOx Oxides of Sulfur SO2 Sulfur Dioxide START Strategic Arms Reduction Treaty SWPPP Stormwater Pollution ...Discussions related to preventing soil erosion ( stormwater pollution prevention) are addressed under water quality effects (Section 4 of this...construction activities, this permit must be obtained and erosion and sediment controls must be installed according to a stormwater pollution

Educational Innovation between Freedom and Fixation: The Cultural-Political Construction of Innovations in Early Childhood Education in the Netherlands

ERIC Educational Resources Information Center

van Oers, Bert

2013-01-01

As in many countries, in the Netherlands, governmental policy regulates the decisions of schools and care providers that concern and the control of the quality of education and care. Article 23 of the Dutch Constitution defines a fundamental right of freedom in matters of education within the context of institutions such as schools and other…

Simulation of Constructed Wetland in treating Wastewater using Fuzzy Logic Technique

NASA Astrophysics Data System (ADS)

Sudarsan, J. S.; Subramani, Sheekha; Rajan, Rajitha J.; Shah, Isha; Nithiyanantham, S.

2018-04-01

Constructed wetlands act as a natural alternative to conventional methods of wastewater treatment. CW are found effective in wastewater containing inorganic matter, organic matter, toxic compounds, metals, nitrogen, phosphorous, heavy metals, organic chemicals, and pathogens. The treatment efficiency by the adaptation of CWs in treatment process is achieved by a complex interaction between plants, microorganisms, soil matrix and substances in the wastewater. Constructed wetland treatment systems are engineered systems designed in such a manner that it could take advantages of those processes occurring in natural wetlands in treating the wastewater concerned, but in a more controlled environment. Petrochemical wastewater was the type of wastewater taken for the study. Characteristics of petrochemical wastewater mainly oil, Biological Oxygen Demand (BOD) and Chemical oxygen demand (COD) were selected for treatment in constructed wetland as they are predominant in petrochemical wastewater. The conventional methods followed in the treatment are chemical and biological treatment. In this study, a fuzzy model for water quality assessment has been developed and water quality index value was obtained. The experiment conducted and further analysis using fuzzy logic indicated that interpretation of certain imprecise data can be improved within fuzzy inference system (FIS). Based on the analysis, we could observe that Typha sp contained wetland cell showed greater efficiency in removal of parameters such as COD and BOD than Phragmites sp. wetland cell.

A Survey of the Current Situation of Clinical Biobanks in China.

PubMed

Li, Haiyan; Ni, Mingyu; Wang, Peng; Wang, Xiaomin

2017-06-01

The development of biomedical research urgently needs the support of a large number of high-quality clinical biospecimens. Therefore, human biobanks at different levels have been established successively in China and other countries at a significantly increasing pace in recent years. To better understand the general current state of clinical biobanks in China, we surveyed 42 clinical biobanks based in hospitals and collected information involving their management systems, sharing mechanisms, quality control systems, and informational management systems using closed questionnaire methods. Based on our current information, there has not been such a large-scale survey in China. An understanding of the status and challenges current clinical biobanks face will provide valuable insights for the construction and sustainable development of higher quality clinical biobanks.

Improving NAVFAC's total quality management of construction drawings with CLIPS

NASA Technical Reports Server (NTRS)

Antelman, Albert

1991-01-01

A diagnostic expert system to improve the quality of Naval Facilities Engineering Command (NAVFAC) construction drawings and specification is described. C Language Integrated Production System (CLIPS) and computer aided design layering standards are used in an expert system to check and coordinate construction drawings and specifications to eliminate errors and omissions.

Improving the Quality of Constructive Peer Feedback

ERIC Educational Resources Information Center

Waggoner Denton, Ashley

2018-01-01

This article presents some simple strategies that instructors can use to improve the quality of the feedback students provide each other during a peer review activity. Briefly, I recommend that emphasis be placed solely on the provision of constructive comments, and that in order to qualify as constructive, a comment must: (1) identify a specific…

Observations and Student Perceptions of the Quality of Preservice Teachers' Teaching Behaviour: Construct Representation and Predictive Quality

ERIC Educational Resources Information Center

Maulana, Ridwan; Helms-Lorenz, Michelle

2016-01-01

Observations and student perceptions are recognised as important tools for examining teaching behaviour, but little is known about whether both perspectives share similar construct representations and how both perspectives link with student academic outcomes. The present study compared the construct representation of preservice teachers' teaching…

High Performance Building Mockup in FLEXLAB

DOE Office of Scientific and Technical Information (OSTI.GOV)

McNeil, Andrew; Kohler, Christian; Lee, Eleanor S.

Genentech has ambitious energy and indoor environmental quality performance goals for Building 35 (B35) being constructed by Webcor at the South San Francisco campus. Genentech and Webcor contracted with the Lawrence Berkeley National Laboratory (LBNL) to test building systems including lighting, lighting controls, shade fabric, and automated shading controls in LBNL’s new FLEXLAB facility. The goal of the testing is to ensure that the systems installed in the new office building will function in a way that reduces energy consumption and provides a comfortable work environment for employees.

Acidity control in the North Branch Potomac

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sheer, D.P.; Harris, D.C.

1982-11-01

The North Branch of the Potomac River is polluted by acid drainage from abandoned coal mines. Recent studies have shown an improvement in water quality since the construction of a large dam near Bloomington, MD; the reservoir formed by the dam intercepts and dilutes slugs of acid. In addition, secondary treatment of pulp and paper industry waste waters at Westernport, MD, results in the production of bicarbonate which also helps to neutralise the acid. The authors propose a method for determining the optimal operation of the reservoir to control acidity.

Thermo-optic locking of a semiconductor laser to a microcavity resonance.

PubMed

McRae, T G; Lee, Kwan H; McGovern, M; Gwyther, D; Bowen, W P

2009-11-23

We experimentally demonstrate thermo-optic locking of a semiconductor laser to an integrated toroidal optical microcavity. The lock is maintained for time periods exceeding twelve hours, without requiring any electronic control systems. Fast control is achieved by optical feedback induced by scattering centers within the microcavity, with thermal locking due to optical heating maintaining constructive interference between the cavity and the laser. Furthermore, the optical feedback acts to narrow the laser linewidth, with ultra high quality microtoroid resonances offering the potential for ultralow linewidth on-chip lasers.

Use of a control chart to monitor diarrhoea admissions: a quality improvement exercise in West Kalimantan Provincial Hospital, Pontianak, Indonesia.

PubMed

Purba, M

1999-09-01

Data on the number of admissions for diarrhoea each week to the West Kalimantan Provincial Hospital, Pontianak, Indonesia over a 5 year period, 1992-1996, were collected. After cleaning and exclusion of extreme values, transformation was then performed to ensure that the data were free of special cause variation and normally distributed. A control chart was then constructed to provide an 'early warning' system for hospital authorities in order to facilitate the management of the epidemic and to improve patient care.

Impact of air pollution control costs on the cost and spatial arrangement of cellulosic biofuel production in the U.S.

PubMed

Murphy, Colin W; Parker, Nathan C

2014-02-18

Air pollution emissions regulation can affect the location, size, and technology choice of potential biofuel production facilities. Difficulty in obtaining air pollutant emission permits and the cost of air pollution control devices have been cited by some fuel producers as barriers to development. This paper expands on the Geospatial Bioenergy Systems Model (GBSM) to evaluate the effect of air pollution control costs on the availability, cost, and distribution of U.S. biofuel production by subjecting potential facility locations within U.S. Clean Air Act nonattainment areas, which exceed thresholds for healthy air quality, to additional costs. This paper compares three scenarios: one with air quality costs included, one without air quality costs, and one in which conversion facilities were prohibited in Clean Air Act nonattainment areas. While air quality regulation may substantially affect local decisions regarding siting or technology choices, their effect on the system as a whole is small. Most biofuel facilities are expected to be sited near to feedstock supplies, which are seldom in nonattainment areas. The average cost per unit of produced energy is less than 1% higher in the scenarios with air quality compliance costs than in scenarios without such costs. When facility construction is prohibited in nonattainment areas, the costs increase by slightly over 1%, due to increases in the distance feedstock is transported to facilities in attainment areas.

Quality control in the recycling stream of PVC from window frames by hyperspectral imaging

NASA Astrophysics Data System (ADS)

Luciani, Valentina; Serranti, Silvia; Bonifazi, Giuseppe; Di Maio, Francesco; Rem, Peter

2013-05-01

Polyvinyl chloride (PVC) is one of the most commonly used thermoplastic materials in respect to the worldwide polymer consumption. PVC is mainly used in the building and construction sector, products such as pipes, window frames, cable insulation, floors, coverings, roofing sheets, etc. are realised utilising this material. In recent years, the problem of PVC waste disposal gained increasing importance in the public discussion. The quantity of used PVC items entering the waste stream is gradually increased as progressively greater numbers of PVC products approach to the end of their useful economic lives. The quality of the recycled PVC depends on the characteristics of the recycling process and the quality of the input waste. Not all PVC-containing waste streams have the same economic value. A transparent relation between value and composition is required to decide if the recycling process is cost effective for a particular waste stream. An objective and reliable quality control technique is needed in the recycling industry for the monitoring of both recycled flow streams and final products in the plant. In this work hyperspectral imaging technique in the near infrared (NIR) range (1000-1700 nm) was applied to identify unwanted plastic contaminants and rubber present in PVC coming from windows frame waste in order to assess a quality control procedure during its recycling process. Results showed as PVC, PE and rubber can be identified adopting the NIR-HSI approach.

A New Model for Solving Time-Cost-Quality Trade-Off Problems in Construction

PubMed Central

Fu, Fang; Zhang, Tao

2016-01-01

A poor quality affects project makespan and its total costs negatively, but it can be recovered by repair works during construction. We construct a new non-linear programming model based on the classic multi-mode resource constrained project scheduling problem considering repair works. In order to obtain satisfactory quality without a high increase of project cost, the objective is to minimize total quality cost which consists of the prevention cost and failure cost according to Quality-Cost Analysis. A binary dependent normal distribution function is adopted to describe the activity quality; Cumulative quality is defined to determine whether to initiate repair works, according to the different relationships among activity qualities, namely, the coordinative and precedence relationship. Furthermore, a shuffled frog-leaping algorithm is developed to solve this discrete trade-off problem based on an adaptive serial schedule generation scheme and adjusted activity list. In the program of the algorithm, the frog-leaping progress combines the crossover operator of genetic algorithm and a permutation-based local search. Finally, an example of a construction project for a framed railway overpass is provided to examine the algorithm performance, and it assist in decision making to search for the appropriate makespan and quality threshold with minimal cost. PMID:27911939

Association of Lower Spiritual Well-Being, Social Support, Self-Esteem, Subjective Well-Being, Optimism and Hope Scores With Mild Cognitive Impairment and Mild Dementia.

PubMed

Dos Santos, Sabrina B; Rocha, Gabrielli P; Fernandez, Liana L; de Padua, Analuiza C; Reppold, Caroline T

2018-01-01

Introduction: Positive psychology (PP) constructs contribute significantly to a better quality of life for people with various diseases. There are still few studies that have evaluated the evolution of these aspects during the progression of dementia. Objective: To compare the scores for self-esteem, life satisfaction, affect, spirituality, hope, optimism and perceived support network between elderly people with mild cognitive impairment (MCI), mild dementia and moderate dementia and control group. Methods: Cross-sectional study. The sample consisted of 66 healthy controls, 15 elderly people with MCI, 25 with mild dementia and 22 with moderate dementia matched by age, gender, and schooling. The instruments used were: Spirituality Self Rating Scale (SSRS), Rosenberg Self-Esteem Scale, Medical Outcomes Study's Social Support Scale, Life Satisfaction Scale (LSS), Positive and Negative Affect Schedule (PANAS), Revised Life Orientation Test (LOT-R), and Adult Dispositional Hope Scale (ADHS). Results: The scores for spiritual well-being, social support, self-esteem, life satisfaction, positive affect, optimism, negative affect, and hope differed significantly between the groups ( p < 0.05). The individuals with MCI and mild dementia had lower spiritual well-being, social support, self-esteem, life satisfaction, positive affect, optimism and hope scores, and higher negative affect scores compared with the controls. The scores for PP constructs did not differ between the group of people with moderate dementia and the control group. Conclusion: Dementia was found to impact several PP constructs in the early stages of the disease. For individuals with greater cognitive impairment, anosognosia appears to suppress the disease's impact on these constructs.

Quality Improvement of Ground Works Process with the Use of Chosen Lean Management Tools - Case Study

NASA Astrophysics Data System (ADS)

Nowotarski, Piotr; Paslawski, Jerzy; Wysocki, Bartosz

2017-12-01

Ground works are one of the first processes connected with erecting structures. Based on ground conditions like the type of soil or level of underground water different types and solutions for foundations are designed. Foundations are the base for the buildings, and their proper design and execution is the key for the long and faultless use of the whole construction and might influence on the future costs of the eventual repairs (especially when ground water level is high, and there is no proper water insulation made). Article presents the introduction of chosen Lean Management tools for quality improvement of the process of ground works based on the analysis made on the construction site of vehicle control station located in Poznan, Poland. Processes assessment is made from different perspectives taking into account that 3 main groups of workers were directly involved in the process: blue collar-workers, site manager and site engineers. What is more comparison is made on the 3 points of view to the problems that might occur during this type of works, with details analysis on the causes of such situation? Authors presents also the change of approach of workers directly involved in the mentioned processes regarding introduction of Lean Management methodology, which illustrates the problem of scepticism for new ideas of the people used to perform works and actions in traditional way. Using Lean Management philosophy in construction is a good idea to streamline processes in company, get rid of constantly recurring problems, and in this way improve the productivity and quality of executed activities. Performed analysis showed that different groups of people have very different idea and opinion on the problems connected with executing the same process - ground works and only having full picture of the situation (especially in construction processes) management can take proper problems-preventing actions that consequently can influence on the amount of waste generated on the construction cite which positively influence on the external environment.

Traceability and Quality Control in Traditional Chinese Medicine: From Chemical Fingerprint to Two-Dimensional Barcode.

PubMed

Cai, Yong; Li, Xiwen; Li, Mei; Chen, Xiaojia; Hu, Hao; Ni, Jingyun; Wang, Yitao

2015-01-01

Chemical fingerprinting is currently a widely used tool that enables rapid and accurate quality evaluation of Traditional Chinese Medicine (TCM). However, chemical fingerprints are not amenable to information storage, recognition, and retrieval, which limit their use in Chinese medicine traceability. In this study, samples of three kinds of Chinese medicines were randomly selected and chemical fingerprints were then constructed by using high performance liquid chromatography. Based on chemical data, the process of converting the TCM chemical fingerprint into two-dimensional code is presented; preprocess and filtering algorithm are also proposed aiming at standardizing the large amount of original raw data. In order to know which type of two-dimensional code (2D) is suitable for storing data of chemical fingerprints, current popular types of 2D codes are analyzed and compared. Results show that QR Code is suitable for recording the TCM chemical fingerprint. The fingerprint information of TCM can be converted into data format that can be stored as 2D code for traceability and quality control.

Achievement of cholesterol targets and prescribing of higher-cost statins: a cross-sectional study in general practice.

PubMed

Fleetcroft, Robert; Schofield, Peter; Duerden, Martin; Ashworth, Mark

2012-12-01

There is conflicting evidence as to whether achievement of cholesterol targets at the population level is dependent on the choice and cost of statin. To investigate the practice-level relationship between cholesterol quality indicators in patients with heart disease, stroke, and diabetes and prescribing of low-cost statins. Correlations and linear regression modelling of retrospective cross-sectional practice-level data with potential explanatory variables in 7909 (96.4%) general practices in England in 2008-2009. Quality indicator data were obtained from the Information Centre and prescribing data from the NHS Business Authority. A 'cholesterol quality indicator' score was constructed by dividing the numbers of patients achieving the target for cholesterol control of ≤5 mmol/l in stroke, diabetes, and heart disease by the numbers on each register. A 'low-cost statin' ratio score was constructed by dividing the numbers of defined daily doses of simvastatin and pravastatin by the total numbers of defined daily doses of statins. Simvastatin accounted for 83.3% (standard deviation [SD] = 15.7%) of low-cost statins prescribed and atorvastatin accounted for 85.7% (SD = 14.8%) of high-cost statins prescribed. The mean cholesterol score was 73.7% (SD = 6.0%). Practices using a higher proportion of the low-cost statins were less successful in achieving cholesterol targets. An increase of 10% in the prescribing of low-cost statins was associated with a decrease of 0.46% in the cholesterol quality indicator score (95% confidence interval = -0.54% to -0.38%, P<0.001). Greater use of low-cost statins was associated with a small reduction in cholesterol control.

Constructing Assessment Model of Primary and Secondary Educational Quality with Talent Quality as the Core Standard

ERIC Educational Resources Information Center

Chen, Benyou

2014-01-01

Quality is the core of education and it is important to standardization construction of primary and secondary education in urban (U) and rural (R) areas. The ultimate goal of the integration of urban and rural education is to pursuit quality urban and rural education. Based on analysing the related policy basis and the existing assessment models…

Vitality and mental health in disability: Associations with social relationships in persons with spinal cord injury and their partners.

PubMed

Tough, Hannah; Fekete, Christine; Brinkhof, Martin W G; Siegrist, Johannes

2017-04-01

Various social relationship constructs have been proposed to affect mental health. However, these constructs have rarely been studied in a comprehensive way in persons with chronic disabilities and their partners, inhibiting researchers from evaluating their relative importance. To investigate 1) the variation in the quantity and quality of social relationships in persons with spinal cord injury (SCI) and their partners; 2) dyadic coherence within social relationship constructs; 3) the interrelationships between social relationship constructs; and 4) the associations of social relationship constructs with vitality and mental health. Cross-sectional survey data from 133 couples of persons with SCI and their partners was used. Quantitative (social networks) and qualitative aspects (social support, relationship quality, loneliness, and reciprocity in partnerships) of social relationships were assessed. Correlations were performed to analyse dyadic coherence and interrelationships of social relationship constructs and multivariable regressions were applied to examine associations with vitality and mental health. Loneliness, larger social networks and higher relationship quality were more prevalent in SCI. All social relationship constructs, apart from loneliness, were more similar within couples than between couples and the interrelationships between different constructs were small. Qualitative aspects of relationships were more important than the quantitative aspects in their associations to vitality and mental health. These associations were most consistent for loneliness, reciprocity and relationship quality in both groups. In the long-term management of community functioning in persons with SCI and their partners, the fostering of high quality intimate relationships should take priority. Copyright © 2016 Elsevier Inc. All rights reserved.

Study of Geochemical System in Constructed Wetland Using Multivariate Statistical Analysis

NASA Astrophysics Data System (ADS)

Chen, V.

2015-12-01

People have recognized that the human activities lead to the degradation of the environment, and constructed wetland is one of the well-known technologies for water treatment. In constructed wetland, complicated processes should be considered such as redox reactions, acid-base reactions, adsorption-desorption between water and sediment and biochemical reactions associated with plant and microorganism. In this study, most of inorganic components were analyzed and principal component analysis (PCA) was followed for depicting the controlling biochemical reaction in the constructed wetland. The results could be a guide to operate the constructed wetland. The constructed wetland in this study is located in Taoyuan County, north Taiwan. It's a horizontal subsurface flow constructed wetland composed of ten cells. The water in wetland was pumped from Nankan River, which collects wastewater from Hwaya technology park, Linkou, Guishan and Nankan industrial zone. The water of inflow and outflow from each cell were collected for analyzing inorganic components with ICP-MS and IC. In general, the results show that water quality had dramatically changed in the first three cells and became stable in the following seven cells. In this study, PCA extracted two major factors (PCs), which can respectively explain 52.76%（PC1）and 28.32%（PC2）of variance of water quality data. PC1 separates samples of the first three cells from those of the other following cells. It is believed that there was another pollution source involved in the 4th cell because PC1 is characterized by high loadings of most of trace heavy metals. On the other hand, the hydrochemistry of water mainly evolve along PC2 axis. PC2 is composed of Fe, Mn, NH4, dissolved oxygen, pH, etc with high loadings. These chemical components are predominately controlled by redox reactions. Moreover, the deep water from the 4th cell contains high concentrations of many heavy metals, especially Cu and Ga. This confirms the previous derivation based on PCA. The rare earth elements (REEs) were also measured in this study. After normalized to North American shale, the REEs shows an uncommon pattern with Eu and Gd positive anomalies and Tm negative anomaly, which probably result from industrial contamination. However, more studies would be needed to prove it.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Del Bianco, M.; Wiehagen, J.; Wood, A.

Residential quality management systems have most often been designed for new home construction. To address quality in existing homes in the form of Scopes of Work (SOW), the NAHB Research Center began with a new construction scope of work and applied it to an existing home project. This document is intended to outline the steps of translating a new home construction SOW to SOW for retrofit.

Preventing Indoor Air Quality Problems in Educational Facilities: Guidelines for Hot, Humid Climates. Revised.

ERIC Educational Resources Information Center

Odom, J. David; DuBose, George

This manual addresses the errors that occur during new construction that subsequently contribute to indoor air quality (IAQ) problems in newly constructed buildings in hot and humid climates, and offers guidelines for preventing them during the design and construction phases. It defines the roles and responsibilities of the design team, the…

The Cerebral Palsy Quality of Life for Children (CP QOL-Child): Evidence of Construct Validity

ERIC Educational Resources Information Center

Chen, Kuan-Lin; Wang, Hui-Yi; Tseng, Mei-Hui; Shieh, Jeng-Yi; Lu, Lu; Yao, Kai-Ping Grace; Huang, Chien-Yu

2013-01-01

The Cerebral Palsy Quality of Life for Children (CP QOL-Child) is the first health condition-specific questionnaire designed for measuring QOL in children with cerebral palsy (CP). However, its construct validity has not yet been confirmed by confirmatory factor analysis (CFA). Hence, this study assessed the construct validity of the caregiver…

Effects of a constructed wetland and pond system upon shallow groundwater quality

Treesearch

Ying Ouyang

2013-01-01

Constructed wetland (CW) and constructed pond (CP) are commonly utilized for removal of excess nutrients and certain pollutants from stormwater. This study characterized shallow groundwater quality for pre- and post-CW and CP system conditions using data from monitoring wells. Results showed that the average concentrations of groundwater phosphorus (P) decreased from...

Self-regulation and the problem of human autonomy: does psychology need choice, self-determination, and will?

PubMed

Ryan, Richard M; Deci, Edward L

2006-12-01

The term autonomy literally refers to regulation by the self. Its opposite, heteronomy, refers to controlled regulation, or regulation that occurs without self-endorsement. At a time when philosophers and economists are increasingly detailing the nature of autonomy and recognizing its social and practical significance, many psychologists are questioning the reality and import of autonomy and closely related phenomena such as will, choice, and freedom. Using the framework of self-determination theory (Ryan & Deci, 2000), we review research concerning the benefits of autonomous versus controlled regulation for goal performance, persistence, affective experience, quality of relationships, and well-being across domains and cultures. We also address some of the controversies and terminological issues surrounding the construct of autonomy, including critiques of autonomy by biological reductionists, cultural relativists, and behaviorists. We conclude that there is a universal and cross-developmental value to autonomous regulation when the construct is understood in an exacting way.

Manufacture of fiber-epoxy test specimens: Including associated jigs and instrumentation

NASA Technical Reports Server (NTRS)

Mathur, S. B.; Felbeck, D. K.

1980-01-01

Experimental work on the manufacture and strength of graphite-epoxy composites is considered. The correct data and thus a true assessment of the strength properties based on a proper and scientifically modeled test specimen with engineered design, construction, and manufacture has led to claims of a very broad spread in optimized values. Such behavior is in the main due to inadequate control during manufacture of test specimen, improper curing, and uneven scatter in the fiber orientation. The graphite fibers are strong but brittle. Even with various epoxy matrices and volume fraction, the fracture toughness is still relatively low. Graphite-epoxy prepreg tape was investigated as a sandwich construction with intermittent interlaminar bonding between the laminates in order to produce high strength, high fracture toughness composites. The quality and control of manufacture of the multilaminate test specimen blanks was emphasized. The dimensions, orientation and cure must be meticulous in order to produce the desired mix.

Tensions in Constructions of Quality in Australian Early Childhood Education and Care Policy History

ERIC Educational Resources Information Center

Logan, Helen

2017-01-01

In pronouncements of early childhood education and care (ECEC) policy the importance of quality appears as a seemingly irrefutable concept. Yet, attention to ECEC policy history reveals tensions between discourses that construct quality in ways that endure whereas other ways are ostensibly forgotten. Drawing on a Foucauldian-influenced…

A Review of Surface Water Quality Models

PubMed Central

Li, Shibei; Jia, Peng; Qi, Changjun; Ding, Feng

2013-01-01

Surface water quality models can be useful tools to simulate and predict the levels, distributions, and risks of chemical pollutants in a given water body. The modeling results from these models under different pollution scenarios are very important components of environmental impact assessment and can provide a basis and technique support for environmental management agencies to make right decisions. Whether the model results are right or not can impact the reasonability and scientificity of the authorized construct projects and the availability of pollution control measures. We reviewed the development of surface water quality models at three stages and analyzed the suitability, precisions, and methods among different models. Standardization of water quality models can help environmental management agencies guarantee the consistency in application of water quality models for regulatory purposes. We concluded the status of standardization of these models in developed countries and put forward available measures for the standardization of these surface water quality models, especially in developing countries. PMID:23853533

Streamline integration as a method for two-dimensional elliptic grid generation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wiesenberger, M., E-mail: Matthias.Wiesenberger@uibk.ac.at; Held, M.; Einkemmer, L.

We propose a new numerical algorithm to construct a structured numerical elliptic grid of a doubly connected domain. Our method is applicable to domains with boundaries defined by two contour lines of a two-dimensional function. Furthermore, we can adapt any analytically given boundary aligned structured grid, which specifically includes polar and Cartesian grids. The resulting coordinate lines are orthogonal to the boundary. Grid points as well as the elements of the Jacobian matrix can be computed efficiently and up to machine precision. In the simplest case we construct conformal grids, yet with the help of weight functions and monitor metricsmore » we can control the distribution of cells across the domain. Our algorithm is parallelizable and easy to implement with elementary numerical methods. We assess the quality of grids by considering both the distribution of cell sizes and the accuracy of the solution to elliptic problems. Among the tested grids these key properties are best fulfilled by the grid constructed with the monitor metric approach. - Graphical abstract: - Highlights: • Construct structured, elliptic numerical grids with elementary numerical methods. • Align coordinate lines with or make them orthogonal to the domain boundary. • Compute grid points and metric elements up to machine precision. • Control cell distribution by adaption functions or monitor metrics.« less

Removal efficiency and enzymatic mechanism of dibutyl phthalate (DBP) by constructed wetlands.

PubMed

Qi, Xin; Li, Tiancui; Wang, Feihua; Dai, Yanran; Liang, Wei

2018-06-01

Four vertical-flow constructed wetland systems were set up in the field in order to study the removal efficiency and possible enzymatic mechanism of the constructed wetlands in treating sewage containing different concentrations of dibutyl phthalate (DBP). Under DBP spiked concentrations of 0.5, 1.0, and 2.0 mg/L, good DBP removal rates of 62.08, 82.17, and 84.17% were achieved, respectively. Meanwhile, certain removal effects of general water quality parameters were observed in all four constructed wetlands: with high average removal rates of nitrate nitrogen (NO 3 - -N) and chemical oxygen demand (COD) of 91.10~93.89 and 82.83~89.17%, respectively, with moderate removal efficiencies of total nitrogen (TN), total phosphorus (TP), ammonia nitrogen (NH 4 + -N) of 44.59~49.67, 30.58~37.18, and 28.52~37.45%, respectively. Compared to the control, an increase of enzyme activities of urease, phosphatase, dehydrogenase, and nitrate reductase was observed in the treatments with DBP addition. In the presence of 0.5 mg/L of DBP concentration, the urease, phosphatase, and dehydrogenase activities reached the highest levels, with an increase of 350.02, 36.57, and 417.88% compared with the control, respectively. It appeared that the low concentration of DBP might better stimulate the release of enzymes.

Environmental Assessment for Toxecon Retrofit for Mercury and Multi-Pollutant Control, Presque Isle Power Plant, Marquette, Michigan

DOE Office of Scientific and Technical Information (OSTI.GOV)

N /A

This Environmental Assessment (EA) evaluates environmental issues associated with constructing and operating an integrated emissions control system proposed by We Energies and its project partners with cost-shared funding support by DOE. The proposed project would be demonstrated at the existing 90-MW Units 7, 8, and 9 of We Energies' coal-fired Presque Isle Power Plant in Marquette, Michigan. The commercial-scale demonstrate would allow utilities to make decisions regarding the integrated emissions control system as a viable commercial option. DOE's share of the funding for the 5-year demonstration project would be about $25 million, while $25 million would also be provided bymore » We Energies and its project partners. This project was selected by DOE under the Clean Coal Power Initiative (CCPI) for negotiation of a cooperative agreement to demonstrate the integration of technologies to reduce emissions of mercury (Hg) and particulate matter, as well as potentially control sulfur dioxide (SO{sub 2}), oxides of nitrogen (NO{sub x}) and hydrochloric acid (HCl) emissions. DOE's decision is whether or not to fund the project. The EA evaluates the principal environmental issues, including air quality, waste management, and traffic, that could result from construction and operation of the proposed project. The EA also considers two reasonably foreseeable scenarios that could result from the no-action alternative in which DOE would not provide cost-shared funding for the proposed project. Key findings include that potential air quality impacts resulting from the proposed project would generally be beneficial because plantwide air emissions would decrease or continue at the same level. The decrease in stack exit temperature would decrease the plume rise, which could result in increased downwind ground-level concentrations of those air pollutants experience little or no decrease in stack emissions. However, results of air dispersion modeling indicated that no major impacts would be expected relative to Prevention of Significant Deterioration increments and National Ambient Air Quality Standards.« less

Phase I of the Kissimmee River restoration project, Florida, USA: impacts of construction on water quality.

PubMed

Colangelo, David J; Jones, Bradley L

2005-03-01

Phase I of the Kissimmee River restoration project included backfilling of 12 km of canal and restoring flow through 24 km of continuous river channel. We quantified the effects of construction activities on four water quality parameters (turbidity, total phosphorus flow-weighted concentration, total phosphorus load and dissolved oxygen concentration). Data were collected at stations upstream and downstream of the construction and at four stations within the construction zone to determine if canal backfilling and construction of 2.4 km of new river channel would negatively impact local and downstream water quality. Turbidity levels at the downstream station were elevated for approximately 2 weeks during the one and a half year construction period, but never exceeded the Florida Department of Environmental Protection construction permit criteria. Turbidity levels at stations within the construction zone were high at certain times. Flow-weighted concentration of total phosphorus at the downstream station was slightly higher than the upstream station during construction, but low discharge limited downstream transport of phosphorus. Total phosphorus loads at the upstream and downstream stations were similar and loading to Lake Okeechobee was not significantly affected by construction. Mean water column dissolved oxygen concentrations at all sampling stations were similar during construction.

Controlled low strength materials (CLSM), reported by ACI Committee 229

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rajendran, N.

1997-07-01

Controlled low-strength material (CLSM) is a self-compacted, cementitious material used primarily as a backfill in lieu of compacted fill. Many terms are currently used to describe this material including flowable fill, unshrinkable fill, controlled density fill, flowable mortar, flowable fly ash, fly ash slurry, plastic soil-cement, soil-cement slurry, K-Krete and other various names. This report contains information on applications, material properties, mix proportioning, construction and quality-control procedures. This report`s intent is to provide basic information on CLSM technology, with emphasis on CLSM material characteristics and advantages over conventional compacted fill. Applications include backfills, structural fills, insulating and isolation fills, pavementmore » bases, conduit bedding, erosion control, void filling, and radioactive waste management.« less

The near optimality of the stabilizing control in a weakly nonlinear system with state-dependent coefficients

NASA Astrophysics Data System (ADS)

Dmitriev, Mikhail G.; Makarov, Dmitry A.

2016-08-01

We carried out analysis of near optimality of one computationally effective nonlinear stabilizing control built for weakly nonlinear systems with coefficients depending on the state and the formal small parameter. First investigation of that problem was made in [M. G. Dmitriev, and D. A. Makarov, "The suboptimality of stabilizing regulator in a quasi-linear system with state-depended coefficients," in 2016 International Siberian Conference on Control and Communications (SIBCON) Proceedings, National Research University, Moscow, 2016]. In this paper, another optimal control and gain matrix representations were used and theoretical results analogous to cited work above were obtained. Also as in the cited work above the form of quality criterion on which this close-loop control is optimal was constructed.

Supervision of tunnelling constructions and software used for their evaluation

NASA Astrophysics Data System (ADS)

Caravanas, Aristotelis; Hilar, Matous

2017-09-01

Supervision is a common instrument for controlling constructions of tunnels. In order to suit relevant project’s purposes a supervision procedure is modified by local conditions, habits, codes and ways of allocating of a particular tunnelling project. The duties of tunnel supervision are specified in an agreement with the client and they can include a wide range of activities. On large scale tunnelling projects the supervision tasks are performed by a high number of people of different professions. Teamwork, smooth communication and coordination are required in order to successfully fulfil supervision tasks. The efficiency and quality of tunnel supervision work are enhanced when specialized software applications are used. Such applications should allow on-line data management and the prompt evaluation, reporting and sharing of relevant construction information and other aspects. The client is provided with an as-built database that contains all the relevant information related to a construction process, which is a valuable tool for the claim management as well as for the evaluation of structure defects that can occur in the future. As a result, the level of risks related to tunnel constructions is decreased.

Construction and performance of the sTGC and MicroMegas chambers for ATLAS NSW upgrade

NASA Astrophysics Data System (ADS)

Sekhniaidze, G.

2017-03-01

The innermost stations of the current ATLAS muon end-cap system, the Small Wheels, must be upgraded in 2019 to retain their good precision tracking and trigger capabilities in the high background environment expected with the upcoming luminosity increase of the LHC. The New Small Wheels (NSW) will employ two chamber technologies: eight layers of MicroMegas (MM) arranged in two quadruplets, sandwiched between two quadruplets of small-strip Thin Gap Chambers (sTGC) for a total of about 2400 m2 of detection planes. All quadruplets have trapezoidal shapes with surface areas between 1 and 3 m2. Both MM and sTGC systems will independently provide trigger and tracking capabilities. The readout boards are industrially produced for both technologies and an accurate quality control is needed. In order to achieve a 15% transverse momentum resolution for 1 TeV muons, in addition to an excellent intrinsic resolution (010 μm), the mechanical precision of each plane of the assembled modules must be as good as 30 μm along the precision coordinate and 80 μm perpendicular to the chamber. In 2016 the milestone to build the first module-0 prototypes for both technologies has been reached. The construction procedure of the module-0 detectors will be reviewed, along with the results of the quality control checks performed during construction. The module-0 have been measured and subjected to a thorough validation. Results obtained with high-energy particle beams, with cosmic rays and with X-rays will be presented.

Infrared survey of 50 buildings constructed during 100 years: thermal performances and damage conditions

NASA Astrophysics Data System (ADS)

Ljungberg, Sven-Ake

1995-03-01

Different building constructions and craftsmanship give rise to different thermal performance and damage conditions. The building stock of most industrial countries consists of buildings of various age, and constructions, from old historic buildings with heavy stone or wooden construction, to new buildings with heavy or light concrete construction, or modern steel or wooden construction. In this paper the result from a detailed infrared survey of 50 buildings from six Swedish military camps is presented. The presentation is limited to a comparison of thermal performance and damage conditions of buildings of various ages, functions, and constructions, of a building period of more than 100 years. The result is expected to be relevant even to civilian buildings. Infrared surveys were performed during 1992-1993, with airborne, and mobile short- and longwave infrared systems, out- and indoor thermography. Interpretation and analysis of infrared data was performed with interactive image and analyzing systems. Field inspections were carried out with fiber optics system, and by ocular inspections. Air-exchange rate was measured in order to quantify air leakages through the building envelope, indicated in thermograms. The objects studied were single-family houses, barracks, office-, service-, school- and exercise buildings, military hotels and restaurants, aircraft hangars, and ship factory buildings. The main conclusions from this study are that most buildings from 1880 - 1940 have a solid construction with a high quality of craftsmanship, relatively good thermal performance, due to extremely thick walls, and adding insulation at the attic floor. From about 1940 - 1960 the quality of construction, thermal performance and craftsmanship seem to vary a lot. Buildings constructed during the period of 1960 - 1990 have in general the best thermal performance due to a better insulation capacity, however, also one finds here the greatest variety of problems. The result from this study is to be incorporated in planning of short- and long term maintenance programs of the Swedish Defence. In general the military buildings are expected to have better status than civilian buildings, due to the more rigorous control during the building process, performed by military building authorities.

Garnet Ring Measurements for the Fermilab Booster 2nd Harmonic Cavity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuharik, J.; Dey, J.; Duel, K.

A perpendicularly biased tuneable 2nd harmonic cavity is being constructed for use in the Fermilab Booster. The cavity's tuner uses National Magnetics AL800 garnet as the tuning media. For quality control, the magnetic properties of the material and the uniformity of the properties within the tuner must be assessed. We describe two tests which are performed on the rings and on their corresponding witness samples.

Human-robot interaction modeling and simulation of supervisory control and situational awareness during field experimentation with military manned and unmanned ground vehicles

NASA Astrophysics Data System (ADS)

Johnson, Tony; Metcalfe, Jason; Brewster, Benjamin; Manteuffel, Christopher; Jaswa, Matthew; Tierney, Terrance

2010-04-01

The proliferation of intelligent systems in today's military demands increased focus on the optimization of human-robot interactions. Traditional studies in this domain involve large-scale field tests that require humans to operate semiautomated systems under varying conditions within military-relevant scenarios. However, provided that adequate constraints are employed, modeling and simulation can be a cost-effective alternative and supplement. The current presentation discusses a simulation effort that was executed in parallel with a field test with Soldiers operating military vehicles in an environment that represented key elements of the true operational context. In this study, "constructive" human operators were designed to represent average Soldiers executing supervisory control over an intelligent ground system. The constructive Soldiers were simulated performing the same tasks as those performed by real Soldiers during a directly analogous field test. Exercising the models in a high-fidelity virtual environment provided predictive results that represented actual performance in certain aspects, such as situational awareness, but diverged in others. These findings largely reflected the quality of modeling assumptions used to design behaviors and the quality of information available on which to articulate principles of operation. Ultimately, predictive analyses partially supported expectations, with deficiencies explicable via Soldier surveys, experimenter observations, and previously-identified knowledge gaps.

Degradation Signals for Ubiquitin-Proteasome Dependent Cytosolic Protein Quality Control (CytoQC) in Yeast

PubMed Central

Maurer, Matthew J.; Spear, Eric D.; Yu, Allen T.; Lee, Evan J.; Shahzad, Saba; Michaelis, Susan

2016-01-01

Cellular protein quality control (PQC) systems selectively target misfolded or otherwise aberrant proteins for degradation by the ubiquitin-proteasome system (UPS). How cells discern abnormal from normal proteins remains incompletely understood, but involves in part the recognition between ubiquitin E3 ligases and degradation signals (degrons) that are exposed in misfolded proteins. PQC is compartmentalized in the cell, and a great deal has been learned in recent years about ER-associated degradation (ERAD) and nuclear quality control. In contrast, a comprehensive view of cytosolic quality control (CytoQC) has yet to emerge, and will benefit from the development of a well-defined set of model substrates. In this study, we generated an isogenic “degron library” in Saccharomyces cerevisiae consisting of short sequences appended to the C-terminus of a reporter protein, Ura3. About half of these degron-containing proteins are substrates of the integral membrane E3 ligase Doa10, which also plays a pivotal role in ERAD and some nuclear protein degradation. Notably, some of our degron fusion proteins exhibit dependence on the E3 ligase Ltn1/Rkr1 for degradation, apparently by a mechanism distinct from its known role in ribosomal quality control of translationally paused proteins. Ubr1 and San1, E3 ligases involved in the recognition of some misfolded CytoQC substrates, are largely dispensable for the degradation of our degron-containing proteins. Interestingly, the Hsp70/Hsp40 chaperone/cochaperones Ssa1,2 and Ydj1, are required for the degradation of all constructs tested. Taken together, the comprehensive degron library presented here provides an important resource of isogenic substrates for testing candidate PQC components and identifying new ones. PMID:27172186

Intermediate quality control tests in the development of a superconducting RF cryomodule for CW operation

NASA Astrophysics Data System (ADS)

Pattalwar, Shrikant; Jones, Thomas; Strachan, John; Bate, Robert; Davies, Phil; McIntosh, Peter

2012-06-01

Through an international cryomodule collaboration, ASTeC at Daresbury Laboratory has taken the primary responsibility in leading the development of an optimised Superconducting RF (SRF) cryomodule, operating in CW mode for energy recovery facilities and other high duty cycle accelerators. For high beam current operation, Higher Order Mode (HOM) absorbers are critical components of the SRF Cryomodule, ensuring excessive heating of the accelerating structures and beam instabilities are effectively managed. This paper describes some of the cold tests conducted on the HOM absorbers and other critical components during the construction phase, to ensure that the quality and reliable cryomodule performance is maintained.

Subminiature eddy-current transducers designed to study welded joints of titanium alloys

NASA Astrophysics Data System (ADS)

Malikov, V. N.; Dmitriev, S. F.; Katasonov, A. O.; Sagalakov, A. M.; Ishkov, A. V.

2017-12-01

Eddy current transducers (ECT) are used to construct a sensor for investigating titanium sheets connected by a welded joint. The paper provides key technical information about the eddy current transducer used and describes the procedure of measurements that makes it possible to control defects in welded joints of titanium alloys. It is capable of automatically changing the filtering cutoff frequency and operating frequency of the device. Experiments were conducted on welded VT1-0 titanium plates. The paper contains the results of these measurements. The dependence data facilitates the assessment of the quality of the welded joints and helps make an educated conclusion about welding quality.

Off-axis spectral beam combining of Bragg reflection waveguide photonic crystal diode lasers

NASA Astrophysics Data System (ADS)

Sun, Fangyuan; Wang, Lijie; Zhao, Yufei; Hou, Guanyu; Shu, Shili; Zhang, Jun; Peng, Hangyu; Tian, Sicong; Tong, Cunzhu; Wang, Lijun

2018-06-01

The spectral beam combining (SBC) of Bragg reflection waveguide photonic crystal (BRW-PC) diode lasers was studied for the first time. An off-axis feedback system was constructed using a stripe mirror and a spatial filter to control beam quality in the external cavity. It was found that the BRW-PC diode lasers with a low divergence and a circular beam provided a simplified and cost-effective SBC. The off-axis feedback broke the beam quality limit of a single element, and an M 2 factor of 3.8 times lower than that of a single emitter in the slow axis was demonstrated.

The comparative effect of individually-generated vs. collaboratively-generated computer-based concept mapping on science concept learning

NASA Astrophysics Data System (ADS)

Kwon, So Young

Using a quasi-experimental design, the researcher investigated the comparative effects of individually-generated and collaboratively-generated computer-based concept mapping on middle school science concept learning. Qualitative data were analyzed to explain quantitative findings. One hundred sixty-one students (74 boys and 87 girls) in eight, seventh grade science classes at a middle school in Southeast Texas completed the entire study. Using prior science performance scores to assure equivalence of student achievement across groups, the researcher assigned the teacher's classes to one of the three experimental groups. The independent variable, group, consisted of three levels: 40 students in a control group, 59 students trained to individually generate concept maps on computers, and 62 students trained to collaboratively generate concept maps on computers. The dependent variables were science concept learning as demonstrated by comprehension test scores, and quality of concept maps created by students in experimental groups as demonstrated by rubric scores. Students in the experimental groups received concept mapping training and used their newly acquired concept mapping skills to individually or collaboratively construct computer-based concept maps during study time. The control group, the individually-generated concept mapping group, and the collaboratively-generated concept mapping group had equivalent learning experiences for 50 minutes during five days, excepting that students in a control group worked independently without concept mapping activities, students in the individual group worked individually to construct concept maps, and students in the collaborative group worked collaboratively to construct concept maps during their study time. Both collaboratively and individually generated computer-based concept mapping had a positive effect on seventh grade middle school science concept learning but neither strategy was more effective than the other. However, the students who collaboratively generated concept maps created significantly higher quality concept maps than those who individually generated concept maps. The researcher concluded that the concept mapping software, Inspiration(TM), fostered construction of students' concept maps individually or collaboratively for science learning and helped students capture their evolving creative ideas and organize them for meaningful learning. Students in both the individual and the collaborative concept mapping groups had positive attitudes toward concept mapping using Inspiration(TM) software.

Seasonal Variation in Drinking and Domestic Water Sources and Quality in Port Harcourt, Nigeria

PubMed Central

Kumpel, Emily; Cock-Esteb, Alicea; Duret, Michel; de Waal, Dominick; Khush, Ranjiv

2017-01-01

We compared dry and rainy season water sources and their quality in the urban region of Port Harcourt, Nigeria. Representative sampling indicated that municipal water supplies represent < 1% of the water sources. Residents rely on privately constructed and maintained boreholes that are supplemented by commercially packaged bottled and sachet drinking water. Contamination by thermotolerant coliforms increased from 21% of drinking water sources in the dry season to 42% of drinking water sources in the rainy season (N = 356 and N = 397). The most significant increase was in sachet water, which showed the lowest frequencies of contamination in the dry season compared with other sources (15%, N = 186) but the highest frequencies during the rainy season (59%, N = 76). Only half as many respondents reported drinking sachet water in the rainy season as in the dry season. Respondents primarily used flush or pour-flush toilets connected to septic tanks (85%, N = 399). The remainder relied on pit latrines and hanging (pier) latrines that drained into surface waters. We found significant associations between fecal contamination in boreholes and the nearby presence of hanging latrines. Sanitary surveys of boreholes showed that more than half were well-constructed, and we did not identify associations between structural or site deficiencies and microbial water quality. The deterioration of drinking water quality during the rainy season is a serious public health risk for both untreated groundwater and commercially packaged water, highlighting a need to address gaps in monitoring and quality control. PMID:27821689

Water-quality assessment of the Smith River drainage basin, California and Oregon

USGS Publications Warehouse

Iwatsubo, Rick T.; Washabaugh, Donna S.

1982-01-01

A water-quality assessment of the Smith River drainage basin was made to provide a summary of the water-quality conditions including known or potential water-quality problems. Results of the study showed that the water quality of the Smith River is excellent and generally meets the water-quality objectives for the beneficial uses identified by the California Regional Water Quality Control Board, North Coast Region. Known and potential problems related to water quality include: Sedimentation resulting from both natural erosional processes and land-use activities such as timber harvest, road construction, and mining that accelerate the erosional processes; bacterial contamination of surface and ground waters from inundated septic tanks and drainfields, and grazing activities; industrial spills which have resulted in fish kills and oil residues; high concetrations of iron in ground water; log and debris jams creating fish migration barriers; and pesticide and trace-element contamination from timber-harvest and mining activities, respectively. Future studies are needed to establish: (1) a sustained long-term monitoring program to provide a broad coverage of water-quality conditions in order to define long-term water-quality trends; and (2) interpretive studies to determine the source of known and potential water-quality problems. (USGS)

Constructing STR multiplex assays.

PubMed

Butler, John M

2005-01-01

Multiplex polymerase chain reaction (PCR) refers to the simultaneous amplification of multiple regions of deoxyribonucleic acid (DNA) using PCR. Commercial short tandem repeat (STR) assays that can coamplify as many as 16 different loci have become widely used in forensic DNA typing. This chapter will focus on some of the aspects of constructing robust STR multiplex assays, including careful design and quality control of PCR primers. Examples from the development of a cat STR 12plex and a human Y chromosome STR 20plex are used to illustrate the importance of various parts of the protocol. Primer design parameters and Internet-accessible resources are discussed, as are solutions to problems with residual dye artifacts that result from impure primers.

The accuracy of the ATLAS muon X-ray tomograph

NASA Astrophysics Data System (ADS)

Avramidou, R.; Berbiers, J.; Boudineau, C.; Dechelette, C.; Drakoulakos, D.; Fabjan, C.; Grau, S.; Gschwendtner, E.; Maugain, J.-M.; Rieder, H.; Rangod, S.; Rohrbach, F.; Sbrissa, E.; Sedykh, E.; Sedykh, I.; Smirnov, Y.; Vertogradov, L.; Vichou, I.

2003-01-01

A gigantic detector, the ATLAS project, is under construction at CERN for particle physics research at the Large Hadron Collider which is to be ready by 2006. An X-ray tomograph has been developed, designed and constructed at CERN in order to control the mechanical quality of the ATLAS muon chambers. We reached a measurement accuracy of 2 μm systematic and 2 μm statistical uncertainties in the horizontal and vertical directions in the working area 220 cm (horizontal)×60 cm (vertical). Here we describe in detail the fundamental approach of the basic principle chosen to achieve such good accuracy. In order to crosscheck our precision, key results of measurements are presented.

Nonlinear Multiobjective MPC-Based Optimal Operation of a High Consistency Refining System in Papermaking

DOE PAGES

Li, Mingjie; Zhou, Ping; Wang, Hong; ...

2017-09-19

As one of the most important unit in the papermaking industry, the high consistency (HC) refining system is confronted with challenges such as improving pulp quality, energy saving, and emissions reduction in its operation processes. Here in this correspondence, an optimal operation of HC refining system is presented using nonlinear multiobjective model predictive control strategies that aim at set-point tracking objective of pulp quality, economic objective, and specific energy (SE) consumption objective, respectively. First, a set of input and output data at different times are employed to construct the subprocess model of the state process model for the HC refiningmore » system, and then the Wiener-type model can be obtained through combining the mechanism model of Canadian Standard Freeness and the state process model that determines their structures based on Akaike information criterion. Second, the multiobjective optimization strategy that optimizes both the set-point tracking objective of pulp quality and SE consumption is proposed simultaneously, which uses NSGA-II approach to obtain the Pareto optimal set. Furthermore, targeting at the set-point tracking objective of pulp quality, economic objective, and SE consumption objective, the sequential quadratic programming method is utilized to produce the optimal predictive controllers. In conclusion, the simulation results demonstrate that the proposed methods can make the HC refining system provide a better performance of set-point tracking of pulp quality when these predictive controllers are employed. In addition, while the optimal predictive controllers orienting with comprehensive economic objective and SE consumption objective, it has been shown that they have significantly reduced the energy consumption.« less

Nonlinear Multiobjective MPC-Based Optimal Operation of a High Consistency Refining System in Papermaking

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Mingjie; Zhou, Ping; Wang, Hong

As one of the most important unit in the papermaking industry, the high consistency (HC) refining system is confronted with challenges such as improving pulp quality, energy saving, and emissions reduction in its operation processes. Here in this correspondence, an optimal operation of HC refining system is presented using nonlinear multiobjective model predictive control strategies that aim at set-point tracking objective of pulp quality, economic objective, and specific energy (SE) consumption objective, respectively. First, a set of input and output data at different times are employed to construct the subprocess model of the state process model for the HC refiningmore » system, and then the Wiener-type model can be obtained through combining the mechanism model of Canadian Standard Freeness and the state process model that determines their structures based on Akaike information criterion. Second, the multiobjective optimization strategy that optimizes both the set-point tracking objective of pulp quality and SE consumption is proposed simultaneously, which uses NSGA-II approach to obtain the Pareto optimal set. Furthermore, targeting at the set-point tracking objective of pulp quality, economic objective, and SE consumption objective, the sequential quadratic programming method is utilized to produce the optimal predictive controllers. In conclusion, the simulation results demonstrate that the proposed methods can make the HC refining system provide a better performance of set-point tracking of pulp quality when these predictive controllers are employed. In addition, while the optimal predictive controllers orienting with comprehensive economic objective and SE consumption objective, it has been shown that they have significantly reduced the energy consumption.« less

Asthma Outcomes: Quality of Life

PubMed Central

Wilson, Sandra R.; Rand, Cynthia S.; Cabana, Michael D.; Foggs, Michael B.; Halterman, Jill S.; Olson, Lynn; Vollmer, William M.; Wright, Rosalind J.; Taggart, Virginia

2014-01-01

Background “Asthma-related quality of life” refers to the perceived impact that asthma has on the patient’s quality of life. Objective National Institutes of Health (NIH) institutes and other federal agencies convened an expert group to recommend standardized measures of the impact of asthma on quality of life for use in future asthma clinical research. Methods We reviewed published documentation regarding the development and psychometric evaluation; clinical research use since 2000; and extent to which the content of each existing quality of life instrument provides a unique, reliable, and valid assessment of the intended construct. We classified instruments as core (required in future studies), supplemental (used according to the study’s aims and standardized), or emerging (requiring validation and standardization). This work was discussed at an NIH-organized workshop convened in March 2010 and finalized in September 2011. Results Eleven instruments for adults and 6 for children were identified for review. None qualified as core instruments because they predominantly measured indicators of asthma control (symptoms and/or functional status); failed to provide a distinct, reliable score measuring all key dimensions of the intended construct; and/or lacked adequate psychometric data. Conclusions In the absence of existing instruments that meet the stated criteria, currently available instruments are classified as either supplemental or emerging. Research is strongly recommended to develop and evaluate instruments that provide a distinct, reliable measure of the patient’s perception of the impact of asthma on all of the key dimensions of quality of life, an important outcome that is not captured in other outcome measures. PMID:22386511

Quality Inspection and Analysis of Three-Dimensional Geographic Information Model Based on Oblique Photogrammetry

NASA Astrophysics Data System (ADS)

Dong, S.; Yan, Q.; Xu, Y.; Bai, J.

2018-04-01

In order to promote the construction of digital geo-spatial framework in China and accelerate the construction of informatization mapping system, three-dimensional geographic information model emerged. The three-dimensional geographic information model based on oblique photogrammetry technology has higher accuracy, shorter period and lower cost than traditional methods, and can more directly reflect the elevation, position and appearance of the features. At this stage, the technology of producing three-dimensional geographic information models based on oblique photogrammetry technology is rapidly developing. The market demand and model results have been emerged in a large amount, and the related quality inspection needs are also getting larger and larger. Through the study of relevant literature, it is found that there are a lot of researches on the basic principles and technical characteristics of this technology, and relatively few studies on quality inspection and analysis. On the basis of summarizing the basic principle and technical characteristics of oblique photogrammetry technology, this paper introduces the inspection contents and inspection methods of three-dimensional geographic information model based on oblique photogrammetry technology. Combined with the actual inspection work, this paper summarizes the quality problems of three-dimensional geographic information model based on oblique photogrammetry technology, analyzes the causes of the problems and puts forward the quality control measures. It provides technical guidance for the quality inspection of three-dimensional geographic information model data products based on oblique photogrammetry technology in China and provides technical support for the vigorous development of three-dimensional geographic information model based on oblique photogrammetry technology.

Finding Silver Linings: A Preliminary Examination of Benefit Finding in Youth With Chronic Pain.

PubMed

Soltani, Sabine; Neville, Alex; Hurtubise, Karen; Hildenbrand, Aimee; Noel, Melanie

2018-04-01

Chronic pain is a pervasive condition in adolescence and is associated with significant psychological distress, functional disability, social isolation, and decreased quality of life for a subset of affected youth. There is a paucity of research examining potential resilience factors and adaptive processes in pediatric chronic pain. Benefit finding refers to the process of perceiving positive consequences in the face of adversity. Previous research on benefit finding in pediatric samples (e.g., oncology; acute injury) has yielded inconsistent results. This is the first study to examine this construct in youth with chronic pain. The objective of the current investigation was to extend previous research on benefit finding to adolescents with chronic pain and to assess relationships between benefit finding, internalizing mental health symptoms (i.e., anxiety, depression, and posttraumatic stress disorder [PTSD]), pain outcomes (pain intensity and interference), and quality of life. Psychometrically sound self-report measures of benefit finding, anxiety, depressive, and PTSD symptoms, pain intensity, pain interference, and quality of life were completed by 145 youth (67.4% female, Mage = 13.3 years, SD = 2.6), referred to a tertiary-level chronic pain program. Benefit finding was significantly correlated with internalizing mental health symptoms, pain outcomes, and quality of life. Further, benefit finding significantly predicted children's self-reported pain intensity, pain interference, and quality of life when controlling for age and sex. Findings suggest that benefit finding is associated with internalizing mental health symptoms, pain outcomes, and quality of life in youth with chronic pain. Future research examining this construct is warranted.

Leishmaniasis sand fly vector density reduction is less marked in destitute housing after insecticide thermal fogging

PubMed Central

2013-01-01

Background Insecticide thermal fogging (ITF) is a tool to control vector borne diseases. Insecticide application success for vector control has been associated with housing materials and architecture. Vector abundance is correlated with weather changes. Nevertheless, housing quality and weather impacts on vector abundance have been unaccounted for in most New World insecticide control trials for leishmaniasis vectors. Methods We conducted a 15 month insecticide control trial that included two deltamethrin [6 mg a.i.m-2] based ITF interventions in 12 of 24 monitored houses at Trinidad de Las Minas, a hyperendemic cutaneous leishmaniasis transmission village in western Panamá. During the study we followed sand fly (SF) abundance, keeping track of rainfall and quantified housing quality using an index based on architecture and construction materials. Results We found a 50 to 80% reduction in SF density in the fogged houses when compared with control houses, while controlling for seasonal changes in SF abundance associated with rainfall. We found heterogeneities in the reductions, as abundance changed according to SF species: Lutzomyia gomezi, Lu. panamensis, Lu. dysponeta and Lu. triramula reduced in density between 40% and 90% after ITF. In contrast, Lu. trapidoi density increased 5% after ITF. Differences in the impact of ITF were associated with housing quality, the most destitute houses, i.e., those with features that ease insect entrance, had a disproportionally larger SF abundance, in some cases with increased domiciliary SF density following the ITF. Conclusion Our results suggest the potential of insecticide application to control SF density and leishmaniasis transmission could depend on housing quality beyond insecticide efficiency. PMID:23742709

Guidelines for establishing and maintaining construction quality databases.

DOT National Transportation Integrated Search

2006-11-01

The main objective of this study was to develop and present guidelines for State highway agencies (SHAs) in establishing and maintaining database systems geared towards construction quality issues for asphalt and concrete paving projects. To accompli...

Environmental Assessment: 49th Materiel Maintenance Group BEAR Base Improvements Holloman Air Force Base, New Mexico

DTIC Science & Technology

2004-08-01

land clearing action will be an irreversible commitment of resources. 4.3.2 Water Quality Construction project impacts to storm water quality can...nearby monitored outfalls for the MSGP. High turbidity, suspended solids, and decreased cross section due to deposition can violate storm water quality benchmarks...and result in a Notice of Violation for storm water quality permits. Beside erosive impacts, construction period activities can cause

Narcissism and relational representations among psychiatric outpatients.

PubMed

Kealy, David; Ogrodniczuk, John S; Joyce, Anthony S; Steinberg, Paul I; Piper, William E

2015-06-01

Pathological narcissism is associated with maladaptive interpersonal behavior, although less is known regarding the internal relational representations of narcissistic patients. The authors examined the relationship between pathological narcissism and two constructs that reflect internal representations of relational patterns: quality of object relations and attachment style. Patients attending a psychiatric day treatment program (N = 218) completed measures of narcissism, general psychiatric distress, and attachment style in terms of attachment avoidance and anxiety. A semistructured interview was used to assess quality of object relations. Multiple regression analysis was conducted, controlling for general psychiatric distress. Pathological narcissism was associated with anxious attachment, but not with avoidant attachment. Narcissism was also associated with lower levels of quality of object relations. The implications of these results are discussed in terms of internal representations of self-other relations.

Quality control and assurance in hematopoietic stem cell transplantation data registries in Japan and other countries.

PubMed

Kuwatsuka, Yachiyo

2016-01-01

Observational studies from national and international registries with large volumes of patients are commonly performed to identify superior strategies for hematopoietic stem cell transplantation. Major international and national stem cell transplant registries collect outcome data using electronic data capture systems, and a systematic study support process has been developed. Statistical support for studies is available from some major international registries, and international and national registries also mutually collaborate to promote stem cell transplant outcome studies and transplant-related activities. Transplant registries additionally take measures to improve data quality to further improve the quality of outcome studies by utilizing data capture systems and manual data management. Data auditing can potentially even further improve data quality; however, human and budgetary resources can be limiting factors in system construction and audits of the Japanese transplant registry are not currently performed.

Indicators for the automated analysis of drug prescribing quality.

PubMed

Coste, J; Séné, B; Milstein, C; Bouée, S; Venot, A

1998-01-01

Irrational and inconsistent drug prescription has considerable impact on morbidity, mortality, health service utilization, and community burden. However, few studies have addressed the methodology of processing the information contained in these drug orders used to study the quality of drug prescriptions and prescriber behavior. We present a comprehensive set of quantitative indicators for the quality of drug prescriptions which can be derived from a drug order. These indicators were constructed using explicit a priori criteria which were previously validated on the basis of scientific data. Automatic computation is straightforward, using a relational database system, such that large sets of prescriptions can be processed with minimal human effort. We illustrate the feasibility and value of this approach by using a large set of 23,000 prescriptions for several diseases, selected from a nationally representative prescriptions database. Our study may result in direct and wide applications in the epidemiology of medical practice and in quality control procedures.

Quality assessment of urban environment

NASA Astrophysics Data System (ADS)

Ovsiannikova, T. Y.; Nikolaenko, M. N.

2015-01-01

This paper is dedicated to the research applicability of quality management problems of construction products. It is offered to expand quality management borders in construction, transferring its principles to urban systems as economic systems of higher level, which qualitative characteristics are substantially defined by quality of construction product. Buildings and structures form spatial-material basis of cities and the most important component of life sphere - urban environment. Authors justify the need for the assessment of urban environment quality as an important factor of social welfare and life quality in urban areas. The authors suggest definition of a term "urban environment". The methodology of quality assessment of urban environment is based on integrated approach which includes the system analysis of all factors and application of both quantitative methods of assessment (calculation of particular and integrated indicators) and qualitative methods (expert estimates and surveys). The authors propose the system of indicators, characterizing quality of the urban environment. This indicators fall into four classes. The authors show the methodology of their definition. The paper presents results of quality assessment of urban environment for several Siberian regions and comparative analysis of these results.

Nature of air pollution, emission sources, and management in the Indian cities

NASA Astrophysics Data System (ADS)

Guttikunda, Sarath K.; Goel, Rahul; Pant, Pallavi

2014-10-01

The global burden of disease study estimated 695,000 premature deaths in 2010 due to continued exposure to outdoor particulate matter and ozone pollution for India. By 2030, the expected growth in many of the sectors (industries, residential, transportation, power generation, and construction) will result in an increase in pollution related health impacts for most cities. The available information on urban air pollution, their sources, and the potential of various interventions to control pollution, should help us propose a cleaner path to 2030. In this paper, we present an overview of the emission sources and control options for better air quality in Indian cities, with a particular focus on interventions like urban public transportation facilities; travel demand management; emission regulations for power plants; clean technology for brick kilns; management of road dust; and waste management to control open waste burning. Also included is a broader discussion on key institutional measures, like public awareness and scientific studies, necessary for building an effective air quality management plan in Indian cities.

Control of Suspect/Counterfeit and Defective Items

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sheriff, Marnelle L.

2013-09-03

This procedure implements portions of the requirements of MSC-MP-599, Quality Assurance Program Description. It establishes the Mission Support Alliance (MSA) practices for minimizing the introduction of and identifying, documenting, dispositioning, reporting, controlling, and disposing of suspect/counterfeit and defective items (S/CIs). employees whose work scope relates to Safety Systems (i.e., Safety Class [SC] or Safety Significant [SS] items), non-safety systems and other applications (i.e., General Service [GS]) where engineering has determined that their use could result in a potential safety hazard. MSA implements an effective Quality Assurance (QA) Program providing a comprehensive network of controls and verification providing defense-in-depth by preventingmore » the introduction of S/CIs through the design, procurement, construction, operation, maintenance, and modification of processes. This procedure focuses on those safety systems, and other systems, including critical load paths of lifting equipment, where the introduction of S/CIs would have the greatest potential for creating unsafe conditions.« less

Continuous real time measurement of pavement quality during construction.

DOT National Transportation Integrated Search

2010-12-01

Intelligent Compaction has been investigated as a means of improving the quality of asphalt pavements during their : construction. The long term performance of an asphalt pavement is directly related to its load bearing capability and : is determined...

48 CFR 846.471 - Determination authority.

Code of Federal Regulations, 2010 CFR

2010-10-01

... MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 846.471 Determination authority. The... Construction and Facilities Management, for those items and services for which purchase authority has been assigned to the Office of Construction and Facilities Management. (b) The Director, Veterans Canteen...

Disambiguating authenticity: Interpretations of value and appeal.

PubMed

O'Connor, Kieran; Carroll, Glenn R; Kovács, Balázs

2017-01-01

While shaping aesthetic judgment and choice, socially constructed authenticity takes on some very different meanings among observers, consumers, producers and critics. Using a theoretical framework positing four distinct meanings of socially constructed authenticity-type, moral, craft, and idiosyncratic-we aim to document empirically the unique appeal of each type. We develop predictions about the relationships between attributed authenticity and corresponding increases in the value ascribed to it through: (1) consumer value ratings, (2) willingness to pay, and (3) behavioral choice. We report empirical analyses from a research program of three multi-method studies using (1) archival data from voluntary consumer evaluations of restaurants in an online review system, (2) a university-based behavioral lab experiment, and (3) an online survey-based experiment. Evidence is consistent across the studies and suggests that perceptions of four distinct subtypes of socially constructed authenticity generate increased appeal and value even after controlling for option quality. Findings suggest additional directions for research on authenticity.

Impacts: NIST Building and Fire Research Laboratory (technical and societal)

NASA Astrophysics Data System (ADS)

Raufaste, N. J.

1993-08-01

The Building and Fire Research Laboratory (BFRL) of the National Institute of Standards and Technology (NIST) is dedicated to the life cycle quality of constructed facilities. The report describes major effects of BFRL's program on building and fire research. Contents of the document include: structural reliability; nondestructive testing of concrete; structural failure investigations; seismic design and construction standards; rehabilitation codes and standards; alternative refrigerants research; HVAC simulation models; thermal insulation; residential equipment energy efficiency; residential plumbing standards; computer image evaluation of building materials; corrosion-protection for reinforcing steel; prediction of the service lives of building materials; quality of construction materials laboratory testing; roofing standards; simulating fires with computers; fire safety evaluation system; fire investigations; soot formation and evolution; cone calorimeter development; smoke detector standards; standard for the flammability of children's sleepwear; smoldering insulation fires; wood heating safety research; in-place testing of concrete; communication protocols for building automation and control systems; computer simulation of the properties of concrete and other porous materials; cigarette-induced furniture fires; carbon monoxide formation in enclosure fires; halon alternative fire extinguishing agents; turbulent mixing research; materials fire research; furniture flammability testing; standard for the cigarette ignition resistance of mattresses; support of navy firefighter trainer program; and using fire to clean up oil spills.

Association of Lower Spiritual Well-Being, Social Support, Self-Esteem, Subjective Well-Being, Optimism and Hope Scores With Mild Cognitive Impairment and Mild Dementia

PubMed Central

dos Santos, Sabrina B.; Rocha, Gabrielli P.; Fernandez, Liana L.; de Padua, Analuiza C.; Reppold, Caroline T.

2018-01-01

Introduction: Positive psychology (PP) constructs contribute significantly to a better quality of life for people with various diseases. There are still few studies that have evaluated the evolution of these aspects during the progression of dementia. Objective: To compare the scores for self-esteem, life satisfaction, affect, spirituality, hope, optimism and perceived support network between elderly people with mild cognitive impairment (MCI), mild dementia and moderate dementia and control group. Methods: Cross-sectional study. The sample consisted of 66 healthy controls, 15 elderly people with MCI, 25 with mild dementia and 22 with moderate dementia matched by age, gender, and schooling. The instruments used were: Spirituality Self Rating Scale (SSRS), Rosenberg Self-Esteem Scale, Medical Outcomes Study’s Social Support Scale, Life Satisfaction Scale (LSS), Positive and Negative Affect Schedule (PANAS), Revised Life Orientation Test (LOT-R), and Adult Dispositional Hope Scale (ADHS). Results: The scores for spiritual well-being, social support, self-esteem, life satisfaction, positive affect, optimism, negative affect, and hope differed significantly between the groups (p < 0.05). The individuals with MCI and mild dementia had lower spiritual well-being, social support, self-esteem, life satisfaction, positive affect, optimism and hope scores, and higher negative affect scores compared with the controls. The scores for PP constructs did not differ between the group of people with moderate dementia and the control group. Conclusion: Dementia was found to impact several PP constructs in the early stages of the disease. For individuals with greater cognitive impairment, anosognosia appears to suppress the disease’s impact on these constructs. PMID:29666594

Constructing Educational Quality in the Arab Region: A Bottom-Up Critique of Regional Educational Governance

ERIC Educational Resources Information Center

Morgan, Clara

2017-01-01

The article challenges the deficit view in which education in the Arab region is portrayed by examining the process of educational regionalisation. It takes as its case study the Arab Regional Agenda for Improving Educational Quality in order to explore the construction of an educational quality space that uses data as a governance model. Drawing…

Body experience and mental representation of body image in patients with haematological malignancies and cancer as assessed with the Body Grid.

PubMed

Weber, C; Bronner, E; Thier, P; Schoeneich, F; Walter, O; Klapp, B F; Kingreen, D

2001-12-01

The domain of body image plays a central role in the quality of life of patients with haematological malignancies and metastasized cancer, since the disease itself as well as the enrolled therapies interfere with psychological and bodily well-being. We approached this highly subjective field by using the repertory grid technique and hypothesized that patients would display a restricted body image, focusing on functional aspects of the body. In all, 55 in-patients (27 men, 28 women, M age = 45.7 yrs, N = 46 with haematological malignancies, N = 9 with metastasized cancer), at the time of initial diagnosis, were included in the study and assessed with the Body Grid, an instrument specifically designed by us for the exploration of body image. The data were analysed by principal component analysis (PCA) and construct categorization. Further, 42 chronic tinnitus sufferers (20 male, 22 female, M age = 46.5 yrs) served as a comparison group. Based on the constructs elicited, six construct categories were formulated in the sense of a first attempt of a hierarchical model (emotion, control, activity, strength, function, appearance). The central constructs (373 construct pairs) were assigned to these categories by three inter-raters. The categories appeared in the following order of frequency: function (27.1%), emotion (20.4%), strength (20.1%), activity (15%), control (10.2%) and appearance (7.2%). PCA indicated that the patients mainly demonstrated a restricted view of their body. In the tinnitus group, the most frequent category proved to be activity (21.3%), closely followed by function (21.1%) and control (20.9%). The body image was also restricted (PCA). The restriction of body image, together with the specific construct choice, seen in the haematology and cancer patients reflects the existential threat of the disease and may serve as a coping strategy. The high percentage of emotional constructs may mirror the patients' need for further support. The distinct distribution of construct categories in the two different patient samples supports the applicability of the proposed preliminary model.

Constructed Wetlands

EPA Pesticide Factsheets

these systems can improve water quality, engineers and scientists construct systems that replicate the functions of natural wetlands. Constructed wetlands are treatment systems that use natural processes

Large Area Silicon Sheet by EFG. [quality control and productivity of edge-defined film-fed growth of ribbons

NASA Technical Reports Server (NTRS)

1979-01-01

Influences on ribbon quality which might be caused by various materials of construction which are used in the growth furnace were assessed. At the present level of ribbon quality, which has produced 8.5% to 9.5% efficient solar cells, no particular influence of any furnace part was detected. The experiments led to the suspicion that the general environment and the somewhat unoptimized materials handling procedures might be responsible for the current variations in ribbon quality and that, therefore, continuous work with this furnace under rather more stringent environmental conditions and operating procedures could perhaps improve materials quality to some extent. The work on the multiple furnace was continued with two multiple growth runs being performed. In these runs, the melt replenishment system performed poorly and extensive modifications to it were designed to make reliable melt feeding for five ribbon growth possible. Additional characterization techniques for wide ribbons, stress measurements, and growth dynamics experiments are reported.

The Cost of Education Index: Measurement of Price Differences of Education Personnel Among New York State School Districts. Working Paper in Education Finance No. 26.

ERIC Educational Resources Information Center

Wendling, Wayne

This report is divided into four sections. Section 1 is a short discussion of the economic theory underlying the construction of the cost of education index and an example of how the index is calculated. Also presented are descriptions of the factors included in the statistical analysis to control for quality, quantity, and cost differences and…

High-Fidelity Geometric Modeling and Mesh Generation for Mechanics Characterization of Polycrystalline Materials

DTIC Science & Technology

2015-01-07

and anisotropic quadrilateral meshes, which can be used as the control mesh for high-order T- spline surface modeling. Archival publications (published...anisotropic T-meshes for the further T- spline surface construction. Finally, a gradient flow-based method is developed to improve the T-mesh quality...shade-off. Halos are bright or dark thin regions around the boundary of the sample. These false edges around the object make many segmentation

Long life assurance study for manned spacecraft long life hardware. Volume 2: Long life assurance studies of EEE parts and packaging

NASA Technical Reports Server (NTRS)

1972-01-01

Guidelines for the design, development, and fabrication of electronic components and circuits for use in spacecraft construction are presented. The subjects discussed involve quality control procedures and test methodology for the following subjects: (1) monolithic integrated circuits, (2) hybrid integrated circuits, (3) transistors, (4) diodes, (5) tantalum capacitors, (6) electromechanical relays, (7) switches and circuit breakers, and (8) electronic packaging.

Runaway Rubber Removal

DTIC Science & Technology

1989-01-01

measured in these investigations <in the field> is apparently the factor the engineer must deal with in problems of design " E7]. With the proliferation of...normal quality control methods are used; there is not much that can be done during construction to improve AC surface friction E81. In design , soft...chevron-type cuts and chipping in tires [23]. Adjustments in aircraft tire design were made to eliminate this type of tire distress. In fact, now it

Temperature Control and Numerical Analysis for Mass Concrete Pile Cap of Hai-huang Bridge

NASA Astrophysics Data System (ADS)

Shi, Han; Hao, Yang; Yong-liang, Wang

2018-05-01

In order to study the heat of hydration in massive concrete, this paper takes Hai-huang bridge for engineering background and uses the finite element analysis software of FEA to analyze the heat of hydration effect of the cushion cap. Comparing the measured data with the theory data, the results showed that the concrete crack was controlled effectively and ensure the construction quality by adopted reasonable temperature control measures. The results of the research prove that the measured data was consistent with calculation data, and it proves the accuracy of the finite element analysis. Finally, the study provides certain reference and guiding significance for similar project.

Study on Coagulant Dosing Control System of Micro Vortex Water Treatment

NASA Astrophysics Data System (ADS)

Fengping, Hu; Qi, Fan; Wenjie, Hu; Xizhen, He; Hongling, Dai

2018-03-01

In view of the characteristics of nonlinearity, large time delay and multi disturbance in the process of coagulant dosing in water treatment, it is difficult to control the dosage of coagulant. According to the four indexes of raw water quality parameters (raw water flow, turbidity, pH value) and turbidity of sedimentation tank, the micro vortex coagulation dosing control model is constructed based on BP neural network and GA. The forecast results of BP neural network model are ideal, and after the optimization of GA, the prediction accuracy of the model is partly improved. The prediction error of the optimized network is ±0.5 mg/L, and has a better performance than non-optimized network.

A real-time control framework for urban water reservoirs operation

NASA Astrophysics Data System (ADS)

Galelli, S.; Goedbloed, A.; Schwanenberg, D.

2012-04-01

Drinking water demand in urban areas is growing parallel to the worldwide urban population, and it is acquiring an increasing part of the total water consumption. Since the delivery of sufficient water volumes in urban areas represents a difficult logistic and economical problem, different metropolitan areas are evaluating the opportunity of constructing relatively small reservoirs within urban areas. Singapore, for example, is developing the so-called 'Four National Taps Strategies', which detects the maximization of water yields from local, urban catchments as one of the most important water sources. However, the peculiar location of these reservoirs can provide a certain advantage from the logistical point of view, but it can pose serious difficulties in their daily management. Urban catchments are indeed characterized by large impervious areas: this results in a change of the hydrological cycle, with decreased infiltration and groundwater recharge, and increased patterns of surface and river discharges, with higher peak flows, volumes and concentration time. Moreover, the high concentrations of nutrients and sediments characterizing urban discharges can cause further water quality problems. In this critical hydrological context, the effective operation of urban water reservoirs must rely on real-time control techniques, which can exploit hydro-meteorological information available in real-time from hydrological and nowcasting models. This work proposes a novel framework for the real-time control of combined water quality and quantity objectives in urban reservoirs. The core of this framework is a non-linear Model Predictive Control (MPC) scheme, which employs the current state of the system, the future discharges furnished by a predictive model and a further model describing the internal dynamics of the controlled sub-system to determine an optimal control sequence over a finite prediction horizon. The main advantage of this scheme stands in its reduced computational requests and the capability of exploiting real-time hydro-meteorological information, which are crucial for an effective operation of these fast-varying hydrological systems. The framework is here demonstrated on the operation of Marina Reservoir (Singapore), whose recent construction in late 2008 increased the effective catchment area to about 50% of the total available. Its operation, which accounts for drinking water supply, flash floods control and water quality standards, is here designed by combining the MPC scheme with the process-based hydrological model SOBEK. Extensive simulation experiments show the validity of the proposed framework.

Comparative study of modified bitumen binder properties collected from mixing plant and quarry.

NASA Astrophysics Data System (ADS)

Mustafa Kamal, M.; Abu Bakar, R.; Hadithon, K. A.

2017-11-01

Quality control and assurance are essential in pavement construction. In general, the properties of bitumen change as it ages in bulk storage, transport, and storage on site. The minimization of bituminous hardening during storing, transportation and mixing depends on careful control of binder temperature. Hence therefore, bitumen should always be stored and handled at the lowest temperature possible, consistent with efficient use. The objective of the work is to monitor the quality of bitumen samples collected from mixing plant and quarry. Results showed that, samples modified bitumen which collected from quarry showed some adverse effects on rheological properties and physical properties after subjecting to high temperature storage within a period of time. The dynamic stiffness, elastic properties and other common binder properties were deteriorated too. The chemical changes that occurred during storage were analysed using Fourier transform infra-red spectroscopy (FTIR). Thus studies developed an understanding of bitumen ageing in storage.

Security Policies for Mitigating the Risk of Load Altering Attacks on Smart Grid Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ryutov, Tatyana; AlMajali, Anas; Neuman, Clifford

2015-04-01

While demand response programs implement energy efficiency and power quality objectives, they bring potential security threats to the Smart Grid. The ability to influence load in a system enables attackers to cause system failures and impacts the quality and integrity of power delivered to customers. This paper presents a security mechanism to monitor and control load according to a set of security policies during normal system operation. The mechanism monitors, detects, and responds to load altering attacks. We examined the security requirements of Smart Grid stakeholders and constructed a set of load control policies enforced by the mechanism. We implementedmore » a proof of concept prototype and tested it using the simulation environment. By enforcing the proposed policies in this prototype, the system is maintained in a safe state in the presence of load drop attacks.« less

Health-Mining: a Disease Management Support Service based on Data Mining and Rule Extraction.

PubMed

Bei, Andrea; De Luca, Stefano; Ruscitti, Giancarlo; Salamon, Diego

2005-01-01

The disease management is the collection of the processes aimed to control the health care and improving the quality at same time reducing the overall cost of the procedures. Our system, Health-Mining, is a Decision Support System with the objective of controlling the adequacy of hospitalization and therapies, determining the effective use of standard guidelines and eventually identifying better ones emerged from the medical practice (Evidence Based Medicine). In realizing the system, we have the aim of creation of a path to admissions- appropriateness criteria construction, valid at an international level. A main goal of the project is rule extraction and the identification of the rules adequate in term of efficacy, quality and cost reduction, especially in the view of fast changing technologies and medicines. We tested Health-Mining in a real test case for an Italian Region, Regione Veneto, on the installation of pacemaker and ICD.

78 FR 58460 - Revision of Air Quality Implementation Plan; California; Placer County Air Pollution Control...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-24

...EPA is finalizing a limited approval and limited disapproval of two permitting rules submitted by California as a revision to the Placer County Air Pollution Control District (PCAPCD) and Feather River Air Quality Management District (FRAQMD) portion of the California State Implementation Plan (SIP). These revisions were proposed in the Federal Register on February 22, 2013 and concern construction and modification of stationary sources of air pollution within each District. We are approving local rules that regulate these emission sources under the Clean Air Act as amended in 1990 (CAA). Final approval of these rules makes the rules federally enforceable and corrects program deficiencies identified in a previous EPA rulemaking (76 FR 44809, July 27, 2011). EPA is also making a technical amendment to the Code of Federal Regulations (CFR) to reflect this previous rulemaking, which removed an obsolete provision from the California SIP.

Sleep deprivation reduces perceived emotional intelligence and constructive thinking skills.

PubMed

Killgore, William D S; Kahn-Greene, Ellen T; Lipizzi, Erica L; Newman, Rachel A; Kamimori, Gary H; Balkin, Thomas J

2008-07-01

Insufficient sleep can adversely affect a variety of cognitive abilities, ranging from simple alertness to higher-order executive functions. Although the effects of sleep loss on mood and cognition are well documented, there have been no controlled studies examining its effects on perceived emotional intelligence (EQ) and constructive thinking, abilities that require the integration of affect and cognition and are central to adaptive functioning. Twenty-six healthy volunteers completed the Bar-On Emotional Quotient Inventory (EQi) and the Constructive Thinking Inventory (CTI) at rested baseline and again after 55.5 and 58 h of continuous wakefulness, respectively. Relative to baseline, sleep deprivation was associated with lower scores on Total EQ (decreased global emotional intelligence), Intrapersonal functioning (reduced self-regard, assertiveness, sense of independence, and self-actualization), Interpersonal functioning (reduced empathy toward others and quality of interpersonal relationships), Stress Management skills (reduced impulse control and difficulty with delay of gratification), and Behavioral Coping (reduced positive thinking and action orientation). Esoteric Thinking (greater reliance on formal superstitions and magical thinking processes) was increased. These findings are consistent with the neurobehavioral model suggesting that sleep loss produces temporary changes in cerebral metabolism, cognition, emotion, and behavior consistent with mild prefrontal lobe dysfunction.

Iowa SIP: Chapter 33 - Special Regulations and Construction Permit Requirements for Major Stationary Sources - Prevention of Significant Deterioration (PSD) of Air Quality

EPA Pesticide Factsheets

EPA Approved Iowa Regulations - 40 CFR 52.820(c) Chapter 33 - Special Regulations and Construction Permit Requirements for Major Stationary Sources - Prevention of Significant Deterioration (PSD) of Air Quality

Monitoring the effects of highway construction in the Sedgefield Lakes watershed.

DOT National Transportation Integrated Search

2007-09-04

This report summarizes the results of a water quality monitoring project to document the effects of the : construction of the I40 bypass around Greensboro on the water quality of residential lakes in the Sedgefield and : Kings Mill communities. Th...

Training Programme for Supervisors. An Element in Quality Assurance of the Construction Industry.

ERIC Educational Resources Information Center

Lo, Tommy Y.

1998-01-01

A customized program on concrete technology for the construction industry in Hong Kong is based on the ISO 9000 quality management system. More than 269 students have been trained; 48.7% of enrollment comes from concrete suppliers. (SK)

The association between improved quality diabetes indicators, health outcomes and costs: towards constructing a "business case" for quality of diabetes care--a time series study.

PubMed

Wilf-Miron, Rachel; Bolotin, Arkadi; Gordon, Nesia; Porath, Avi; Peled, Ronit

2014-12-01

In primary health care systems where member's turnover is relatively low, the question, whether investment in quality of care improvement can make a business case, or is cost effective, has not been fully answered.The objectives of this study were: (1) to investigate the relationship between improvement in selected measures of diabetes (type 2) care and patients' health outcomes; and (2) to estimate the association between improvement in performance and direct medical costs. A time series study with three quality indicators - Hemoglobin A1c (HbA1c) testing, HbA1C and LDL- cholesterol (LDL-C) control - which were analyzed in patients with diabetes, insured by a large health fund. Health outcomes measures used: hospitalization days, Emergency Department (ED) visits and mortality. Poisson, GEE and Cox regression models were employed. Covariates: age, gender and socio-economic rank. 96,553 adult (age >18) patients with diabetes were analyzed. The performance of the study indicators, significantly and steadily improved during the study period (2003-2009). Poor HbA1C (>9%) and inappropriate LDL-C control (>100 mg/dl) were significantly associated with number of hospitalization days. ED visits did not achieve statistical significance. Improvement in HbA1C control was associated with an annual average of 2% reduction in hospitalization days, leading to substantial reduction in tertiary costs. The Hazard ratio for mortality, associated with poor HbA1C and LDL-C, control was 1.78 and 1.17, respectively. Our study demonstrates the effect of continuous improvement in quality care indicators, on health outcomes and resource utilization, among patients with diabetes. These findings support the business case for quality, especially in healthcare systems with relatively low enrollee turnover, where providers, in the long term, could "harvest" their investments in improving quality.

Final Independent External Peer Review Report Supplemental Major Rehabilitation Evaluation Report for Center Hill Dam, Caney Fork River, DeKalb County, Tennessee

DTIC Science & Technology

2013-09-25

level will not overtop the main embankment dam but will encroach into the 3.6-feet of freeboard allotted for wind and wave run-up. This encroachment...In particular, short-term impacts on noise, air quality, water quality, migratory birds , fisheries, and traffic during construction have not been...term effects of project construction, specifically the short-term, temporary impacts on noise, air quality, water quality, migratory birds , fisheries

Evaluating and Refining the Construct of Sexual Quality With Item Response Theory: Development of the Quality of Sex Inventory.

PubMed

Shaw, Amanda M; Rogge, Ronald D

2016-02-01

This study took a critical look at the construct of sexual quality. The 65 items of four well-validated self-report measures of sexual satisfaction (the Index of Sexual Satisfaction [ISS], Hudson, Harrison, & Crosscup, 1981; the Global Measure of Sexual Satisfaction [GMSEX], Lawrance & Byers, 1995; the Pinney Sexual Satisfaction Inventory [PSSI], Pinney, Gerrard, & Denney, 1987; the Young Sexual Satisfaction Scale [YSSS], Young, Denny, Luquis, & Young, 1998) and an additional 74 potential sexual quality items were given to 3060 online participants. Using Item Response Theory (IRT), we demonstrated that the ISS, YSSS, and PSSI scales provided suboptimal levels of precision in assessing sexual quality, particularly given the length of those scales. Exploratory factor analyses, IRT, differential item functioning analyses, and longitudinal responsiveness analyses were used to develop and evaluate the Quality of Sex Inventory. Results suggested that, in comparison to existing scales, the QSI (1) offers investigators and clinicians more theoretically focused scales, (2) distinguishes sexual satisfaction from sexual dissatisfaction, and (3) offers greater precision and power for detecting differences with (4) comparably high levels of responsiveness for detecting change over time despite being notably shorter than most of the existing scales. The QSI-satisfaction subscales demonstrated strong convergent validity with other measures of sexual satisfaction and excellent construct validity with anchor scales from the nomological net surrounding that construct, suggesting that they continue to assess the same theoretical construct as prior scales. Implications for research are discussed.

Diabetes Risk and Disease Management in Later Life: A National Longitudinal Study of the Role of Marital Quality.

PubMed

Liu, Hui; Waite, Linda; Shen, Shannon

2016-11-01

We assess the association between marital quality and both the risk of developing diabetes and the management of diabetes after its onset in later life. We use data from the first two waves of the National Social Life, Health, and Aging Project to estimate regression models with lagged dependent variables. The sample includes 1,228 married respondents, among whom 389 were diabetic. Those with either a reported diagnosis or with HbA1c ≥ 6.5% are identified diabetic. We categorize diabetic respondents into three groups: controlled, undiagnosed, and uncontrolled diabetes. We conduct factor analysis to construct positive and negative marital quality scales. For women, an increase in positive marital quality between Waves 1 and 2 is related to a lower risk of being diabetic at Wave 2, net of diabetes status at Wave 1; surprisingly, for men, an increase in negative marital quality between Waves 1 and 2 is related to both a lower risk of being diabetic at Wave 2 and a higher chance of controlling diabetes at Wave 2 after its onset. Our results challenge the traditional assumption that negative marital quality is always detrimental to health and encourage family scholars to distinguish different sources and types of negative marital quality. © The Author 2016. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Traceability and Quality Control in Traditional Chinese Medicine: From Chemical Fingerprint to Two-Dimensional Barcode

PubMed Central

Cai, Yong; Li, Xiwen; Li, Mei; Chen, Xiaojia; Ni, Jingyun; Wang, Yitao

2015-01-01

Chemical fingerprinting is currently a widely used tool that enables rapid and accurate quality evaluation of Traditional Chinese Medicine (TCM). However, chemical fingerprints are not amenable to information storage, recognition, and retrieval, which limit their use in Chinese medicine traceability. In this study, samples of three kinds of Chinese medicines were randomly selected and chemical fingerprints were then constructed by using high performance liquid chromatography. Based on chemical data, the process of converting the TCM chemical fingerprint into two-dimensional code is presented; preprocess and filtering algorithm are also proposed aiming at standardizing the large amount of original raw data. In order to know which type of two-dimensional code (2D) is suitable for storing data of chemical fingerprints, current popular types of 2D codes are analyzed and compared. Results show that QR Code is suitable for recording the TCM chemical fingerprint. The fingerprint information of TCM can be converted into data format that can be stored as 2D code for traceability and quality control. PMID:26089936

Monitoring the effects of highway construction over the Little River and Crane Creek.

DOT National Transportation Integrated Search

2005-09-08

This report summarizes the results of a two-year water quality monitoring project to document the effects of : the construction of the Highway 1 bypass on the water quality of Crane (Crains) Creek and the Little River. : Automated monitoring equipmen...

Construction activity, emissions, and air quality impacts : real-world observations from an Arizona road-widening case study.

DOT National Transportation Integrated Search

2010-10-22

The Arizona Department of Transportation (ADOT) sponsored this investigation, a field : study of emissions and air quality impacts generated from a road widening project, to gain : insight into construction-related emissions of particulate matter (PM...

Real-time robot deliberation by compilation and monitoring of anytime algorithms

NASA Technical Reports Server (NTRS)

Zilberstein, Shlomo

1994-01-01

Anytime algorithms are algorithms whose quality of results improves gradually as computation time increases. Certainty, accuracy, and specificity are metrics useful in anytime algorighm construction. It is widely accepted that a successful robotic system must trade off between decision quality and the computational resources used to produce it. Anytime algorithms were designed to offer such a trade off. A model of compilation and monitoring mechanisms needed to build robots that can efficiently control their deliberation time is presented. This approach simplifies the design and implementation of complex intelligent robots, mechanizes the composition and monitoring processes, and provides independent real time robotic systems that automatically adjust resource allocation to yield optimum performance.

MTF measurement of LCDs by a linear CCD imager: I. Monochrome case

NASA Astrophysics Data System (ADS)

Kim, Tae-hee; Choe, O. S.; Lee, Yun Woo; Cho, Hyun-Mo; Lee, In Won

1997-11-01

We construct the modulation transfer function (MTF) measurement system of a LCD using a linear charge-coupled device (CCD) imager. The MTF used in optical system can not describe in the effect of both resolution and contrast on the image quality of display. Thus we present the new measurement method based on the transmission property of a LCD. While controlling contrast and brightness levels, the MTF is measured. From the result, we show that the method is useful for describing of the image quality. A ne measurement method and its condition are described. To demonstrate validity, the method is applied for comparison of the performance of two different LCDs.

Assessing Sedimentation Issues Within Aging Flood Control Reservoirs in Oklahoma

NASA Astrophysics Data System (ADS)

Bennet, Sean J.; Cooper, Charles M.; Ritchie, Jerry C.; Dunbar, John A.; Allen, Peter M.; Caldwell, Larry W.; McGee, Thomas M.

2002-10-01

Since 1948, the USDA-NRCS has constructed nearly 11,000 flood control dams across the United States, and many of the reservoirs are rapidly filling with sediment. To rehabilitate these structures, the impounded sediment must be assessed to determine the volume of accumulated sediment and the potential hazard this sediment may pose if reintroduced to the environment. An assessment of sedimentation issues within two reservoirs, Sugar Creek No. 12, Hinton, Oklahoma, and Sergeant Major No. 4, Cheyenne, Oklahoma, is presented. Sediment cores obtained using a vibracoring system were composed of alternating layers of gravel, sand, silt, and clay. Stratigraphic analysis coupled with 137Cs dating techniques enabled the discrimination of pre-construction sediment from post-construction deposition. An acoustic profiling system was unencumbered by the relatively shallow water depth at Sugar Creek No. 12 and the seismic horizons agreed well with the sediment core data. Total sediment volume determined from the acoustic survey and the sediment core data for comparable areas differed by only 1.4 percent. The seismic profiling system worked well in the relatively deeper lake of Sergeant Major No. 4 and showed good correspondence to the collected core data. Detailed chemical analyses showed that overall sediment quality was good at both locations and that chemical composition was spatially invariant. Implementation of these techniques will aid action agencies such as the USDA-NRCS in their assessment and effective management of aging flood control reservoirs.

Injectable gellan gum hydrogels with autologous cells for the treatment of rabbit articular cartilage defects.

PubMed

Oliveira, João T; Gardel, Leandro S; Rada, Tommaso; Martins, Luís; Gomes, Manuela E; Reis, Rui L

2010-09-01

In this work, the ability of gellan gum hydrogels coupled with autologous cells to regenerate rabbit full-thickness articular cartilage defects was tested. Five study groups were defined: (a) gellan gum with encapsulated chondrogenic predifferentiated rabbit adipose stem cells (ASC + GF); (b) gellan gum with encapsulated nonchondrogenic predifferentiated rabbit adipose stem cells (ASC); (c) gellan gum with encapsulated rabbit articular chondrocytes (AC) (standard control); (d) gellan gum alone (control); (e) empty defect (control). Full-thickness articular cartilage defects were created and the gellan gum constructs were injected and left for 8 weeks. The macroscopic aspect of the explants showed a progressive increase of similarity with the lateral native cartilage, stable integration at the defect site, more pronouncedly in the cell-loaded constructs. Tissue scoring showed that ASC + GF exhibited the best results regarding tissue quality progression. Alcian blue retrieved similar results with a better outcome for the cell-loaded constructs. Regarding real-time PCR analyses, ASC + GF had the best progression with an upregulation of collagen type II and aggrecan, and a downregulation of collagen type I. Gellan gum hydrogels combined with autologous cells constitute a promising approach for the treatment of articular cartilage defects, and adipose derived cells may constitute a valid alternative to currently used articular chondrocytes. (c) 2010 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

Monitoring water quality from LANDSAT. [satellite observation of Virginia

NASA Technical Reports Server (NTRS)

Barker, J. L.

1975-01-01

Water quality monitoring possibilities from LANDSAT were demonstrated both for direct readings of reflectances from the water and indirect monitoring of changes in use of land surrounding Swift Creek Reservoir in a joint project with the Virginia State Water Control Board and NASA. Film products were shown to have insufficient resolution and all work was done by digitally processing computer compatible tapes. Land cover maps of the 18,000 hectare Swift Creek Reservoir watershed, prepared for two dates in 1974, are shown. A significant decrease in the pine cover was observed in a 740 hectare construction site within the watershed. A measure of the accuracy of classification was obtained by comparing the LANDSAT results with visual classification at five sites on a U-2 photograph. Such changes in land cover can alert personnel to watch for potential changes in water quality.

Seasonal Variation in Drinking and Domestic Water Sources and Quality in Port Harcourt, Nigeria.

PubMed

Kumpel, Emily; Cock-Esteb, Alicea; Duret, Michel; de Waal, Dominick; Khush, Ranjiv

2017-02-08

We compared dry and rainy season water sources and their quality in the urban region of Port Harcourt, Nigeria. Representative sampling indicated that municipal water supplies represent < 1% of the water sources. Residents rely on privately constructed and maintained boreholes that are supplemented by commercially packaged bottled and sachet drinking water. Contamination by thermotolerant coliforms increased from 21% of drinking water sources in the dry season to 42% of drinking water sources in the rainy season ( N = 356 and N = 397). The most significant increase was in sachet water, which showed the lowest frequencies of contamination in the dry season compared with other sources (15%, N = 186) but the highest frequencies during the rainy season (59%, N = 76). Only half as many respondents reported drinking sachet water in the rainy season as in the dry season. Respondents primarily used flush or pour-flush toilets connected to septic tanks (85%, N = 399). The remainder relied on pit latrines and hanging (pier) latrines that drained into surface waters. We found significant associations between fecal contamination in boreholes and the nearby presence of hanging latrines. Sanitary surveys of boreholes showed that more than half were well-constructed, and we did not identify associations between structural or site deficiencies and microbial water quality. The deterioration of drinking water quality during the rainy season is a serious public health risk for both untreated groundwater and commercially packaged water, highlighting a need to address gaps in monitoring and quality control. © The American Society of Tropical Medicine and Hygiene.

Energy Efficient Crawlspace Foundation Retrofit: Mixed Humid Climate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Del Bianco, M.; Wiehagen, J.

2013-01-01

Residential quality management systems have most often been designed for new home construction. To address quality in existing homes in the form of Scopes of Work (SOW), the NAHB Research Center began with a new construction scope of work and applied it to an existing home project. This document is intended to outline the steps of translating a new home construction SOW to SOW for retrofit and addressed crawlspace foundations in a mixed-humid climate.

Informal worker phenomenon in housing construction project

NASA Astrophysics Data System (ADS)

Wijayaningtyas, Maranatha; Sipan, Ibrahim; Lukiyanto, Kukuh

2017-11-01

The informal workers phenomenon on housing construction projects in Indonesia is different from workers in other sectors who would always request as permanent employees. Substantively, the informal workers are disinclined to be bound as permanent employees which different from the general labor paradigm. Hence, the objective of this study is to find out how the labour selection process, the factors that affected their performance, and the suitable wage system to achieve the target completion of housing construction project. The qualitative method is used to uncover and understand the meaning behind the phenomena (numina) of informal workers action and their influence on housing construction project which called phenomenological approach. Five informal workers and two project managers were selected as informants based on predetermined criteria with in-depth interviews. The results showed that the informal worker were more satisfied with the wage based on unit price while working in the housing construction project for the flexibility in working hours. In addition, the developer was also relieved because they only control the quality and the achievement of the project completion time which supported by informal worker leader. Therefore, these findings are beneficial for both of developer and government as policy maker to succeed the housing program in Indonesia.

A cluster-randomised quality improvement study to improve two inpatient stroke quality indicators.

PubMed

Williams, Linda; Daggett, Virginia; Slaven, James E; Yu, Zhangsheng; Sager, Danielle; Myers, Jennifer; Plue, Laurie; Woodward-Hagg, Heather; Damush, Teresa M

2016-04-01

Quality indicator collection and feedback improves stroke care. We sought to determine whether quality improvement training plus indicator feedback was more effective than indicator feedback alone in improving inpatient stroke indicators. We conducted a cluster-randomised quality improvement trial, randomising hospitals to quality improvement training plus indicator feedback versus indicator feedback alone to improve deep vein thrombosis (DVT) prophylaxis and dysphagia screening. Intervention sites received collaborative-based quality improvement training, external facilitation and indicator feedback. Control sites received only indicator feedback. We compared indicators pre-implementation (pre-I) to active implementation (active-I) and post-implementation (post-I) periods. We constructed mixed-effect logistic models of the two indicators with a random intercept for hospital effect, adjusting for patient, time, intervention and hospital variables. Patients at intervention sites (1147 admissions), had similar race, gender and National Institutes of Health Stroke Scale scores to control sites (1017 admissions). DVT prophylaxis improved more in intervention sites during active-I period (ratio of ORs 4.90, p<0.001), but did not differ in post-I period. Dysphagia screening improved similarly in both groups during active-I, but control sites improved more in post-I period (ratio of ORs 0.67, p=0.04). In logistic models, the intervention was independently positively associated with DVT performance during active-I period, and negatively associated with dysphagia performance post-I period. Quality improvement training was associated with early DVT improvement, but the effect was not sustained over time and was not seen with dysphagia screening. External quality improvement programmes may quickly boost performance but their effect may vary by indicator and may not sustain over time. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Accelerated construction

DOT National Transportation Integrated Search

2004-01-01

Accelerated Construction Technology Transfer (ACTT) is a strategic process that uses various innovative techniques, strategies, and technologies to minimize actual construction time, while enhancing quality and safety on today's large, complex multip...

Construction Management: Building Schools Faster in the International Marketplace

ERIC Educational Resources Information Center

Scarano, Joseph J.

1976-01-01

Construction management accelerates school construction, increases quality and labor productivity, lowers costs, and offers developing nations an opportunity to improve their own management capabilities. (MLF)

Determining the market value of high-rise residential buildings based on evaluation of consumer properties

NASA Astrophysics Data System (ADS)

Kolobova, Svetlana

2018-03-01

As you know, high-rise construction is an indicator of the practical implementation of advanced innovative technologies in the construction industry of the country. High-rise building inevitably comes to the big cities, in connection with the shortage and value of land. The life cycle of any construction project, including high-rise buildings consists of chains: of engineering survey - design-construction-operation. In the process of operation of a tall building, decisions about major repairs or reconstruction of a building are made for decision-making on further use. This article describes methods of assessing the consumer quality of high-rise residential buildings and the establishment of prices based on consumer characteristics of a tall residential building. It is proposed to assess the premises under their quality characteristics. The study was conducted to establish the influence of individual, comprehensive and integral indicators of comparable quality for effective quality living spaces. Simultaneously, there was established a relationship of quality with the consumer cost of housing, ultimately with the potential needs of owners, tenants of the home, lessor dwelling, or buyers of residential properties and other participants in the residential real estate market. This relationship further creates consumer requirements to quality standard of premises at a certain stage of socio-economic development.

Comparative analysis of structural concrete quality assurance practices on nine nuclear power plant construction projects. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Willenbrock, J.H.; Thomas, H.R. Jr.; Burati, J.L. Jr.

1978-06-01

The basic objective of this research effort was to perform a comparative analysis of the Quality Assurance practices related to the structural concrete phase on nine nuclear power plant projects which are (or have been) under construction in the United States in the past ten years. This analysis identified the response of each Quality Assurance program to the applicable criteria of 10 CFR Part 50, Appendix B as well as to the pertinent regulatory requirements and industry standards. The major emphasis was placed on the construction aspects of the structural concrete phase of each project. The engineering and design aspectsmore » were examined whenever they interfaced with the construction aspects. For those aspects of the Quality Assurance system which can be considered managerial in nature (i.e., organizational relationships, types of Quality Assurance programs, corrective action procedures, etc.) an attempt has been made to present the alternative approaches that were identified. For those aspects of the Quality Assurance system which are technical in nature (i.e., the frequency of testing for slump, compressive strength, etc.) an attempt has been made to present a comparative analysis between projects and in relation to the recommended or mandated practices presented in the appropriate industry codes and standards.« less

DCSC (Defense Construction Supply Center) Total Quality Management Master Plan

DTIC Science & Technology

1989-07-01

job while allowing them to establish a better balance between work and personal needs. 29 TQM SHORT-MID-LONG RANGE INITIATIVES MID RANGE (3 YEARS...all performance standards. IMPROVE THE QUALITY OF WORKLIFE - Projects requiring engineering support throughout FY 90 and beyond are: Construction of

75 FR 59081 - Approval and Promulgation of Air Quality Implementation Plans; Michigan; PSD Regulations

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-27

... Promulgation of Air Quality Implementation Plans; Michigan; PSD Regulations AGENCY: Environmental Protection... the prevention of significant deterioration (PSD) construction permit program under the Federal Clean... potentially subject to the PSD construction permit program. On July 16, 2010, Michigan submitted revisions...

An inventory of aeronautical ground research facilities. Volume 4: Engineering flight simulation facilities

NASA Technical Reports Server (NTRS)

Pirrello, C. J.; Hardin, R. D.; Capelluro, L. P.; Harrison, W. D.

1971-01-01

The general purpose capabilities of government and industry in the area of real time engineering flight simulation are discussed. The information covers computer equipment, visual systems, crew stations, and motion systems, along with brief statements of facility capabilities. Facility construction and typical operational costs are included where available. The facilities provide for economical and safe solutions to vehicle design, performance, control, and flying qualities problems of manned and unmanned flight systems.

Strategy for design NIR calibration sets based on process spectrum and model space: An innovative approach for process analytical technology.

PubMed

Cárdenas, V; Cordobés, M; Blanco, M; Alcalà, M

2015-10-10

The pharmaceutical industry is under stringent regulations on quality control of their products because is critical for both, productive process and consumer safety. According to the framework of "process analytical technology" (PAT), a complete understanding of the process and a stepwise monitoring of manufacturing are required. Near infrared spectroscopy (NIRS) combined with chemometrics have lately performed efficient, useful and robust for pharmaceutical analysis. One crucial step in developing effective NIRS-based methodologies is selecting an appropriate calibration set to construct models affording accurate predictions. In this work, we developed calibration models for a pharmaceutical formulation during its three manufacturing stages: blending, compaction and coating. A novel methodology is proposed for selecting the calibration set -"process spectrum"-, into which physical changes in the samples at each stage are algebraically incorporated. Also, we established a "model space" defined by Hotelling's T(2) and Q-residuals statistics for outlier identification - inside/outside the defined space - in order to select objectively the factors to be used in calibration set construction. The results obtained confirm the efficacy of the proposed methodology for stepwise pharmaceutical quality control, and the relevance of the study as a guideline for the implementation of this easy and fast methodology in the pharma industry. Copyright © 2015 Elsevier B.V. All rights reserved.

Effects of a leisure programme on quality of life and stress of individuals with ASD.

PubMed

García-Villamisar, D A; Dattilo, J

2010-07-01

Even though there is research demonstrating a positive relationship between leisure participation and the two constructs of quality of life and stress reduction, current conceptualisation of leisure as a contributor to quality of life is limited. In addition, in spite of improvements in accurate diagnosis of autism spectrum disorder (ASD) at increasingly earlier ages and proliferation of interventions, research associated with leisure and quality of life for people with ASD is lacking. Therefore, a study using a repeated measures design was used to measure effects of a 1-year group leisure programme intended to facilitate interaction with media, engagement in exercise, playing games and doing crafts, attending events, and participating in other recreation activities on quality of life and stress of 37 participants (22 male, 15 female), ages 17-39 (M = 31.49) years at the beginning of the programme) diagnosed with an ASD and a group of 34 adults with ASD as control group (waiting list) (19 male, 15 female), ages 24-38 (M = 30 at programme initiation) years. There was a significant decrease in overall scores of stress levels for participants over the course of the study and there was a significant increase in the four factors of quality of life that were measured (satisfaction, independence, competence and social interaction) as well as the total score for quality of life from baseline to the end of the intervention 12 months later. In contrast, the control group demonstrated no significant improvements related to stress or quality of life. Implications of these findings to leisure services and the quality of life of individuals with ASD are discussed. Findings support the contention that participation in recreation activities positively influenced the stress and quality of life of adults with ASD.

Complex network structure of musical compositions: Algorithmic generation of appealing music

NASA Astrophysics Data System (ADS)

Liu, Xiao Fan; Tse, Chi K.; Small, Michael

2010-01-01

In this paper we construct networks for music and attempt to compose music artificially. Networks are constructed with nodes and edges corresponding to musical notes and their co-occurring connections. We analyze classical music from Bach, Mozart, Chopin, as well as other types of music such as Chinese pop music. We observe remarkably similar properties in all networks constructed from the selected compositions. We conjecture that preserving the universal network properties is a necessary step in artificial composition of music. Power-law exponents of node degree, node strength and/or edge weight distributions, mean degrees, clustering coefficients, mean geodesic distances, etc. are reported. With the network constructed, music can be composed artificially using a controlled random walk algorithm, which begins with a randomly chosen note and selects the subsequent notes according to a simple set of rules that compares the weights of the edges, weights of the nodes, and/or the degrees of nodes. By generating a large number of compositions, we find that this algorithm generates music which has the necessary qualities to be subjectively judged as appealing.

Review of the effects of in-stream pipeline crossing construction on aquatic ecosystems and examination of Canadian methodologies for impact assessment.

PubMed

Lévesque, Lucie M; Dubé, Monique G

2007-09-01

Pipeline crossing construction alters river and stream channels, hence may have detrimental effects on aquatic ecosystems. This review examines the effects of crossing construction on fish and fish habitat in rivers and streams, and recommends an approach to monitoring and assessment of impacts associated with these activities. Pipeline crossing construction is shown to not only compromise the integrity of the physical and chemical nature of fish habitat, but also to affect biological habitat (e.g., benthic invertebrates and invertebrate drift), and fish behavior and physiology. Indicators of effect include: water quality (total suspended solids TSS), physical habitat (substrate particle size, channel morphology), benthic invertebrate community structure and drift (abundance, species composition, diversity, standing crop), and fish behavior and physiology (hierarchy, feeding, respiration rate, loss of equilibrium, blood hematocrit and leukocrit levels, heart rate and stroke volume). The Before-After-Control-Impact (BACI) approach, which is often applied in Environmental Effects Monitoring (EEM), is recommended as a basis for impact assessment, as is consideration of site-specific sensitivities, assessment of significance, and cumulative effects.

Preliminary construction of integral analysis for characteristic components in complex matrices by in-house fabricated solid-phase microextraction fibers combined with gas chromatography-mass spectrometry.

PubMed

Tang, Zhentao; Hou, Wenqian; Liu, Xiuming; Wang, Mingfeng; Duan, Yixiang

2016-08-26

Integral analysis plays an important role in study and quality control of substances with complex matrices in our daily life. As the preliminary construction of integral analysis of substances with complex matrices, developing a relatively comprehensive and sensitive methodology might offer more informative and reliable characteristic components. Flavoring mixtures belonging to the representatives of substances with complex matrices have now been widely used in various fields. To better study and control the quality of flavoring mixtures as additives in food industry, an in-house fabricated solid-phase microextraction (SPME) fiber was prepared based on sol-gel technology in this work. The active organic component of the fiber coating was multi-walled carbon nanotubes (MWCNTs) functionalized with hydroxyl-terminated polydimethyldiphenylsiloxane, which integrate the non-polar and polar chains of both materials. In this way, more sensitive extraction capability for a wider range of compounds can be obtained in comparison with commercial SPME fibers. Preliminarily integral analysis of three similar types of samples were realized by the optimized SPME-GC-MS method. With the obtained GC-MS data, a valid and well-fit model was established by partial least square discriminant analysis (PLS-DA) for classification of these samples (R2X=0.661, R2Y=0.996, Q2=0.986). The validity of the model (R2=0.266, Q2=-0.465) has also approved the potential to predict the "belongingness" of new samples. With the PLS-DA and SPSS method, further screening out the markers among three similar batches of samples may be helpful for monitoring and controlling the quality of the flavoring mixtures as additives in food industry. Conversely, the reliability and effectiveness of the GC-MS data has verified the comprehensive and efficient extraction performance of the in-house fabricated fiber. Copyright © 2016 Elsevier B.V. All rights reserved.

The EQ-5D-5L is a valid approach to measure health related quality of life in patients undergoing bariatric surgery.

PubMed

Fermont, Jilles M; Blazeby, Jane M; Rogers, Chris A; Wordsworth, Sarah

2017-01-01

Bariatric surgery is considered an effective treatment for individuals with severe and complex obesity. Besides reducing weight and improving obesity related comorbidities such as diabetes, bariatric surgery could improve patients' health-related quality of life. However, the frequently used instrument to measure quality of life, the EQ-5D has not been validated for use in bariatric surgery, which is a major limitation to its use in this clinical context. Our study undertook a psychometric validation of the 5 level EQ-5D (EQ-5D-5L) using clinical trial data to measure health-related quality of life in patients with severe and complex obesity undergoing bariatric surgery. Health-related quality of life was assessed at baseline (before randomisation) and six months later in 189 patients in a randomised controlled trial of bariatric surgery. Patients completed two generic health-related quality of life instruments, the EQ-5D-5L and SF-12, which were used together for the validation using data from all patients in the trial as the trial is ongoing. Psychometric analyses included construct and criterion validity and responsiveness to change. Of the 189 validation patients, 141 (75%) were female, the median age was 49 years old (range 23-70 years) and body mass index ranged from 33-70 kg/m2. For construct validity, there were significant improvements in the distribution of responses in all EQ-5D dimensions between baseline and 6 months after randomisation. For criterion validity, the highest degree of correlation was between the EQ-5D pain/discomfort and SF-12 bodily pain domain. For responsiveness the EQ-5D and SF-12 showed statistically significant improvements in health-related quality of life between baseline and 6 months after randomisation. The EQ-5D-5L is a valid generic measure for measuring health-related quality of life in bariatric surgery patients.

Principles of control automation of soil compacting machine operating mechanism

NASA Astrophysics Data System (ADS)

Anatoly Fedorovich, Tikhonov; Drozdov, Anatoly

2018-03-01

The relevance of the qualitative compaction of soil bases in the erection of embankment and foundations in building and structure construction is given.The quality of the compactible gravel and sandy soils provides the bearing capability and, accordingly, the strength and durability of constructed buildings.It has been established that the compaction quality depends on many external actions, such as surface roughness and soil moisture; granulometry, chemical composition and degree of elasticity of originalfilled soil for compaction.The analysis of technological processes of soil bases compaction of foreign and domestic information sources showed that the solution of such important problem as a continuous monitoring of soil compaction actual degree in the process of machine operation carry out only with the use of modern means of automation. An effective vibrodynamic method of gravel and sand material sealing for the building structure foundations for various applications was justified and suggested.The method of continuous monitoring the soil compaction by measurement of the amplitudes and frequencies of harmonic oscillations on the compactible surface was determined, which allowed to determine the basic elements of facilities of soil compacting machine monitoring system of operating, etc. mechanisms: an accelerometer, a bandpass filter, a vibro-harmonics, an on-board microcontroller. Adjustable parameters have been established to improve the soil compaction degree and the soil compacting machine performance, and the adjustable parameter dependences on the overall indexhave been experimentally determined, which is the soil compaction degree.A structural scheme of automatic control of the soil compacting machine control mechanism and theoperation algorithm has been developed.

Extreme anthropogenic erosion: Topsoil Selling in the Mekong Delta and consequences for soil quality

NASA Astrophysics Data System (ADS)

Weigand, Susanne; Sebesvari, Zita; Vien, Duong Minh; Kruse, Jens; Guong, Vo Thi; Amelung, Wulf

2017-04-01

Increasing urbanization and industrialization leads to increasing demands for construction material, especially in low income countries. For this purpose topsoil is sometimes removed and used as construction material. Topsoil Selling is practiced around the world from America, Europe and Africa to Asia. In the Mekong Delta, Vietnam farmers physically remove the upper 10-40 cm of their paddy fields and sell it to contractors (= Topsoil Selling, TSS). The excavated material is used for road construction or brick production and therefore the most fertile part of the paddy soil is irrecoverably lost. The temporal effects of topsoil removal on soil quality are not yet fully understood. We hypothesized that after soil removal, soil quality and yield potential are significantly lower compared to the original topsoil. To test this hypothesis, we sampled two chronosequences in two different provinces of the Mekong Delta. The provinces are Sóc Trăng (Control, 1, 2, 3, 8 years after TSS) and Trà Vinh (Control, 3, 5, 8 years after TSS). The sampling areas differ in texture and cultivation practice: clayey-loamy vs. sandy-loamy and double vs. triple rice cropping. For each year of the chronosequence, 4 field sites were investigated. We sampled the Ap, Bg1, and Bg2 horizon up to 40 cm depth as composite samples from 6 to 8 cores per field. Soil organic carbon (Corg) stocks at TSS sites were up to 20 t/ha lower than at Control sites (Control: 50 t/ha) in Sóc Trăng and up to 15 t/ha lower in Tra Vinh (Control: 30 t/ha). Especially the Bg horizons revealed a continuous decline in Corg with time after soil removal. Analysis of available nutrients (Na, K, Ca, Mg, S, Fe, Al, Mn, Zn, Cu) determined by the Mehlich3-Method are still ongoing. Preliminary results, however, suggest that there is not sustainable loss of these elements after selling, but that initial risk of losses are reverted under prolonged management. Phosphorus fractionation according to the Hedley method indicate, however, that easily and moderately plant available P forms are depleted, which has to be accounted for in land-restoration measures. Overall, the current data we received so far revealed that TSS induces mainly a dramatic loss of soil organic matter. It was ongoing up to the 8th year of our chronosequence; yet, it was not necessarily accompanied by losses in inorganic nutrients. As a result, there is a chance also for the farmers to overcome risks in yield decline because the former subsoils overtake the role of the former topsoils in maintaining rice production.

Child Reactivity Moderates the Over-Time Association between Mother-Child Conflict Quality and Externalizing Problems

ERIC Educational Resources Information Center

Nelson, Jackie A.

2015-01-01

Constructive parent-child conflict interactions that teach children to problem-solve and negotiate can enhance children's social adjustment. This paper identifies constructive and destructive qualities of mother-child conflict and explores whether child temperament moderated associations with changes in externalizing problems over time. One…

Modular Building Supplement: A Quick, Quality Solution for Schools.

ERIC Educational Resources Information Center

Goodmiller, Brian D.; Schendell, Derek G.

2003-01-01

This supplement presents three articles on modular construction that look at: "Fast Track Expansion for a New Jersey School" (involving a modular addition); "Precast Construction Helps Schools Meet Attendance Boom" (precast concrete components are quick, durable, and flexible); and "Airing HVAC Concerns" (poor indoor air quality in prefabricated…

Environmental Assessment for EOD Stand-Up at NAS Fort Worth JRB

DTIC Science & Technology

2012-03-01

Range: Implementation of the Proposed Action would result in a negligible or minor effect on storm water quality and volume. All construction...negligible or minor effect on storm water quality and volume at this site. All construction activities would comply with appropriate local, state, and

Evaluating radiographers' diagnostic accuracy in screen-reading mammograms: what constitutes a quality study?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Debono, Josephine C, E-mail: josephine.debono@bci.org.au; Poulos, Ann E; Westmead Breast Cancer Institute, Westmead, New South Wales

The aim of this study was to first evaluate the quality of studies investigating the diagnostic accuracy of radiographers as mammogram screen-readers and then to develop an adapted tool for determining the quality of screen-reading studies. A literature search was used to identify relevant studies and a quality evaluation tool constructed by combining the criteria for quality of Whiting, Rutjes, Dinnes et al. and Brealey and Westwood. This constructed tool was then applied to the studies and subsequently adapted specifically for use in evaluating quality in studies investigating diagnostic accuracy of screen-readers. Eleven studies were identified and the constructed toolmore » applied to evaluate quality. This evaluation resulted in the identification of quality issues with the studies such as potential for bias, applicability of results, study conduct, reporting of the study and observer characteristics. An assessment of the applicability and relevance of the tool for this area of research resulted in adaptations to the criteria and the development of a tool specifically for evaluating diagnostic accuracy in screen-reading. This tool, with further refinement and rigorous validation can make a significant contribution to promoting well-designed studies in this important area of research and practice.« less

Risk Analysis of Underestimate Cost Offer to The Project Quality in Aceh Province

NASA Astrophysics Data System (ADS)

Rani, Hafnidar A.

2016-11-01

The possibility of errors in the process of offer price determination could be enormous, so it can affect the possibility of project underestimate cost which can impact and reduce the profit if being implementing. Government Equipment/Service Procurement Policy Institution (LKPP) assesses that the practices of cheaper price in the government equipment/service procurement are still highly found and can be potential to decrease the project quality. This study aimed to analyze the most dominant factors happened in underestimate cost offer practice, to analyze the relationship of underestimate cost offer risk factors to road construction project quality in Aceh Province and to analyze the most potential factors of underestimate cost offer risk affecting road construction project quality in Aceh Province. Road construction projects observed the projects which have been implemented in Aceh Province since 2013 - 2015. This study conducted by interviewing Government Budget Authority (KPA), and distributing the questionnaire to the road construction contractors with the qualification of K1, K2, K3, M1, M2 and B1. Based on the data from Construction Service Development Institution (LPJK) of Aceh Province on 2016, the populations obtained are 2,717 constructors. By using Slovin Equation, the research samples obtained are 97 contractors. The most dominant factors in underestimate cost offer risk of the road construction projects in Aceh Province is Contingency Cost Factor which the mean is 4.374.

Measuring Work Functioning: Validity of a Weighted Composite Work Functioning Approach.

PubMed

Boezeman, Edwin J; Sluiter, Judith K; Nieuwenhuijsen, Karen

2015-09-01

To examine the construct validity of a weighted composite work functioning measurement approach. Workers (health-impaired/healthy) (n = 117) completed a composite measure survey that recorded four central work functioning aspects with existing scales: capacity to work, quality of work performance, quantity of work, and recovery from work. Previous derived weights reflecting the relative importance of these aspects of work functioning were used to calculate the composite weighted work functioning score of the workers. Work role functioning, productivity, and quality of life were used for validation. Correlations were calculated and norms applied to examine convergent and divergent construct validity. A t test was conducted and a norm applied to examine discriminative construct validity. Overall the weighted composite work functioning measure demonstrated construct validity. As predicted, the weighted composite score correlated (p < .001) strongly (r > .60) with work role functioning and productivity (convergent construct validity), and moderately (.30 < r < .60) with physical quality of life and less strongly than work role functioning and productivity with mental quality of life (divergent validity). Further, the weighted composite measure detected that health-impaired workers show with a large effect size (Cohen's d > .80) significantly worse work functioning than healthy workers (discriminative validity). The weighted composite work functioning measurement approach takes into account the relative importance of the different work functioning aspects and demonstrated good convergent, fair divergent, and good discriminative construct validity.

Exploring household income as a predictor of psychological well-being among long-term colorectal cancer survivors.

PubMed

Lundy, J Jason; Coons, Stephen Joel; Wendel, Christopher; Hornbrook, Mark C; Herrinton, Lisa; Grant, Marcia; Krouse, Robert S

2009-03-01

The purpose of this analysis was to determine the unique contribution of household income to the variance explained in psychological well-being (PWB) among a sample of colorectal cancer (CRC) survivors. This study is a secondary analysis of data collected as part of the Health-Related Quality of Life in Long-Term Colorectal Cancer Survivors Study, which included CRC survivors with (cases) and without (controls) ostomies. The dataset included socio-demographic, health status, and health-related quality of life (HRQOL) information. HRQOL was assessed with the modified City of Hope Quality of Life (mCOH-QOL)-Ostomy questionnaire and SF-36v2. To assess the relationship between income and PWB, a hierarchical linear regression model was constructed combining data from both cases and controls. After accounting for the proportion of variance in PWB explained by the other independent variables in the model, the additional variance explained by income was significant (R (2) increased from 0.228 to 0.250; P = 0.006). Although the study design does not allow causal inference, these results demonstrate a significant relationship between income and PWB in CRC survivors. The findings suggest that for non-randomized group comparisons of HRQOL, income should, at the very least, be included as a control variable in the analysis.

Multifractal Properties of Process Control Variables

NASA Astrophysics Data System (ADS)

Domański, Paweł D.

2017-06-01

Control system is an inevitable element of any industrial installation. Its quality affects overall process performance significantly. The assessment, whether control system needs any improvement or not, requires relevant and constructive measures. There are various methods, like time domain based, Minimum Variance, Gaussian and non-Gaussian statistical factors, fractal and entropy indexes. Majority of approaches use time series of control variables. They are able to cover many phenomena. But process complexities and human interventions cause effects that are hardly visible for standard measures. It is shown that the signals originating from industrial installations have multifractal properties and such an analysis may extend standard approach to further observations. The work is based on industrial and simulation data. The analysis delivers additional insight into the properties of control system and the process. It helps to discover internal dependencies and human factors, which are hardly detectable.

An RFID-Based Manufacturing Control Framework for Loosely Coupled Distributed Manufacturing System Supporting Mass Customization

NASA Astrophysics Data System (ADS)

Chen, Ruey-Shun; Tsai, Yung-Shun; Tu, Arthur

In this study we propose a manufacturing control framework based on radio-frequency identification (RFID) technology and a distributed information system to construct a mass-customization production process in a loosely coupled shop-floor control environment. On the basis of this framework, we developed RFID middleware and an integrated information system for tracking and controlling the manufacturing process flow. A bicycle manufacturer was used to demonstrate the prototype system. The findings of this study were that the proposed framework can improve the visibility and traceability of the manufacturing process as well as enhance process quality control and real-time production pedigree access. Using this framework, an enterprise can easily integrate an RFID-based system into its manufacturing environment to facilitate mass customization and a just-in-time production model.

Testing and checkout experiences in the National Transonic Facility since becoming operational

NASA Technical Reports Server (NTRS)

Bruce, W. E., Jr.; Gloss, B. B.; Mckinney, L. W.

1988-01-01

The U.S. National Transonic Facility, constructed by NASA to meet the national needs for High Reynolds Number Testing, has been operational in a checkout and test mode since the operational readiness review (ORR) in late 1984. During this time, there have been problems centered around the effect of large temperature excursions on the mechanical movement of large components, the reliable performance of instrumentation systems, and an unexpected moisture problem with dry insulation. The more significant efforts since the ORR are reviewed and NTF status concerning hardware, instrumentation and process controls systems, operating constraints imposed by the cryogenic environment, and data quality and process controls is summarized.

A modern depleted uranium manufacturing facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zagula, T.A.

1995-07-01

The Specific Manufacturing Capabilities (SMC) Project located at the Idaho National Engineering Laboratory (INEL) and operated by Lockheed Martin Idaho Technologies Co. (LMIT) for the Department of Energy (DOE) manufactures depleted uranium for use in the U.S. Army MIA2 Abrams Heavy Tank Armor Program. Since 1986, SMC has fabricated more than 12 million pounds of depleted uranium (DU) products in a multitude of shapes and sizes with varying metallurgical properties while maintaining security, environmental, health and safety requirements. During initial facility design in the early 1980`s, emphasis on employee safety, radiation control and environmental consciousness was gaining momentum throughout themore » DOE complex. This fact coupled with security and production requirements forced design efforts to focus on incorporating automation, local containment and computerized material accountability at all work stations. The result was a fully automated production facility engineered to manufacture DU armor packages with virtually no human contact while maintaining security, traceability and quality requirements. This hands off approach to handling depleted uranium resulted in minimal radiation exposures and employee injuries. Construction of the manufacturing facility was complete in early 1986 with the first armor package certified in October 1986. Rolling facility construction was completed in 1987 with the first certified plate produced in the fall of 1988. Since 1988 the rolling and manufacturing facilities have delivered more than 2600 armor packages on schedule with 100% final product quality acceptance. During this period there was an annual average of only 2.2 lost time incidents and a single individual maximum radiation exposure of 150 mrem. SMC is an example of designing and operating a facility that meets regulatory requirements with respect to national security, radiation control and personnel safety while achieving production schedules and product quality.« less

Lowbury Lecture 2013. Cultural determinants of infection control behaviour: understanding drivers and implementing effective change.

PubMed

Borg, M A

2014-03-01

Despite dealing with biomedical practices, infection prevention and control (IPC) is essentially a behavioural science. Human behaviour is influenced by various factors, including culture. Hofstede's model of cultural dimensions proposes that national cultures vary along consistent dimensions which can be grouped and scored as specific constructs. Studies have reported that three Hofstede constructs--power distance, uncertainty avoidance, and masculinity--show significant association with several key performance indicators relevant to IPC and antibiotic stewardship. In addition, national meticillin-resistant Staphylococcus aureus (MRSA) levels within Europe correlate well with general quality-of-care indices, including preventive strategies and patient rights. This suggests that IPC may be simply a microcosm of overall quality and safety standards within hospitals and countries. Effective improvement would therefore need to address underlying and embedded core cultural values relevant to patient safety and quality of care. Successful IPC strategies are likely to be those that are compatible with the cultural background where they are implemented. To this end, content analysis of many current IPC improvement tools identifies elements of strong compatibility with cultures that are low in uncertainty avoidance and power distance, and high in individualism and masculinity. However, this cultural combination is largely restricted to Anglo-Saxon countries, where most of the recent improvements in healthcare-associated infection (HCAI) incidence have taken place. There is a paucity of research on IPC behaviour change in different cultural backgrounds, especially countries that score high for power distance and/or uncertainty avoidance. This information is vital to inform IPC campaigns in these countries, which often show high HCAI prevalence. Copyright © 2014 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

Transportation and utilization of aggregates for road construction

NASA Astrophysics Data System (ADS)

Fladvad, Marit; Wigum, Børge Johannes; Aurstad, Joralf

2017-04-01

Road construction relies on non-renewable aggregate resources as the main construction material. Sources for high-quality aggregate resources are scattered, and requirements for aggregate quality can cause long transport distances between quarry and road construction site. In European countries, the average aggregate consumption per capita is 5 tonnes per year (European Aggregates Association, 2016), while the corresponding figure for Norway is 11 tonnes (Neeb, 2015). Half the Norwegian aggregate production (sand, gravel and crushed rock) is used for road construction. In Norway, aggregate resources have been considered abundant. However, stricter requirement for aggregate quality, and increased concern for sustainability and environmental issues have spurred focus on reduction of transport lengths through better utilization of local aggregate materials. In this research project, information about pavement design and aggregate quality requirements were gathered from a questionnaire sent to selected experts from the World Road Organization (PIARC), European Committee for Standardization (CEN), and Nordic Road Association (NVF). The gathered data was compared to identify differences and similarities for aggregate use in the participating countries. Further, the data was compared to known data from Norway regarding: - amount of aggregates required for a road structure - aggregate transport lengths and related costs A total of 18 countries participated in the survey, represented by either road authorities, research institutions, or contractors. There are large variations in practice for aggregate use among the represented countries, and the selection of countries is sufficient to illustrate a variety in pavement designs, aggregate sizes, and quality requirements for road construction. There are considerable differences in both pavement thickness and aggregate sizes used in the studied countries. Total thicknesses for pavement structures varies from 220 mm to 2400 mm, and aggregate sizes for unbound materials varies from 19 mm to 600 mm. These results imply great differences in the amount of aggregate transport to road construction sites. Another important factor is the distances between the construction sites and the aggregate sources. For many projects, especially in countries in need of importing aggregates, aggregate transport will have considerable impact on sustainability assessment of the construction projects. If pavement design can be altered with the goal of achieving better utilization of local aggregates through adaption to the quality of local aggregates, aggregate transportation can be reduced. Reduced transport will alter the economical balance of a project, allowing reallocation of costs from transport to e.g. improved aggregate production. The overall result can be more profitable construction projects and a more sustainable development of road structures.

Diet quality of breast cancer survivors after a six-month weight management intervention: Improvements and association with weight loss

PubMed Central

Christifano, Danielle N.; Fazzino, Tera L.; Sullivan, Debra A.; Befort, Christie A.

2016-01-01

Purpose Obesity and diet quality are two distinct lifestyle factors associated with morbidity and mortality among breast cancer survivors. The purpose of this study was to examine diet quality changes during a weight loss intervention among breast cancer survivors, and whether diet quality change was an important factor related to weight loss. Methods Participants were overweight/obese breast cancer survivors (n=180) participating in a weight loss intervention. Diet quality scores were calculated using the Healthy Eating Index-2010. Paired sample t-tests were run to examine change in diet quality, and a latent difference model was constructed to examine whether change in diet quality was associated with weight change. Results Participants significantly improved diet quality (p=.001) and lost 13.2%± 5.8% (mean± SD) of their weight (p=.001). Six month HEI score was significantly associated with weight loss, controlling for baseline BMI (p=.003). Improvement in diet quality was also significantly associated with weight loss (p=.01). Conclusion Our findings indicate that a weight loss intervention can result in both clinically significant weight loss and improvement in diet quality, and that improved diet quality is predictive of weight loss. Both weight loss and diet quality are implicated in longevity and quality of life for breast cancer survivors. PMID:27635676

The PEDro scale had acceptably high convergent validity, construct validity, and interrater reliability in evaluating methodological quality of pharmaceutical trials.

PubMed

Yamato, Tie Parma; Maher, Chris; Koes, Bart; Moseley, Anne

2017-06-01

The Physiotherapy Evidence Database (PEDro) scale has been widely used to investigate methodological quality in physiotherapy randomized controlled trials; however, its validity has not been tested for pharmaceutical trials. The aim of this study was to investigate the validity and interrater reliability of the PEDro scale for pharmaceutical trials. The reliability was also examined for the Cochrane Back and Neck (CBN) Group risk of bias tool. This is a secondary analysis of data from a previous study. We considered randomized placebo controlled trials evaluating any pain medication for chronic spinal pain or osteoarthritis. Convergent validity was evaluated by correlating the PEDro score with the summary score of the CBN risk of bias tool. The construct validity was tested using a linear regression analysis to determine the degree to which the total PEDro score is associated with treatment effect sizes, journal impact factor, and the summary score for the CBN risk of bias tool. The interrater reliability was estimated using the Prevalence and Bias Adjusted Kappa coefficient and 95% confidence interval (CI) for the PEDro scale and CBN risk of bias tool. Fifty-three trials were included, with 91 treatment effect sizes included in the analyses. The correlation between PEDro scale and CBN risk of bias tool was 0.83 (95% CI 0.76-0.88) after adjusting for reliability, indicating strong convergence. The PEDro score was inversely associated with effect sizes, significantly associated with the summary score for the CBN risk of bias tool, and not associated with the journal impact factor. The interrater reliability for each item of the PEDro scale and CBN risk of bias tool was at least substantial for most items (>0.60). The intraclass correlation coefficient for the PEDro score was 0.80 (95% CI 0.68-0.88), and for the CBN, risk of bias tool was 0.81 (95% CI 0.69-0.88). There was evidence for the convergent and construct validity for the PEDro scale when used to evaluate methodological quality of pharmacological trials. Both risk of bias tools have acceptably high interrater reliability. Copyright © 2017 Elsevier Inc. All rights reserved.

Significance of biological resource collection and tumor tissue bank creation.

PubMed

Yu, Ying-Yan; Zhu, Zheng-Gang

2010-01-15

Progress in the molecular oncology of gastrointestinal carcinomas depends on high quality cancer tissues for research. Recent acceleration on new technological platforms as well as the "omics" revolution increases the demands on tissues and peripheral blood for research at the DNA, mRNA and protein levels. Tissue bank creation emerges as a priority. Tumor tissue banks are facilities that are organized to collect, store and distribute samples of tumor and normal tissue for further use in basic and translational cancer research. The samples are generally obtained immediately after excision, prior to fixation, to ensure optimal preservation of proteins and nucleic acids. It is possible for surgeons or pathologists to collect fresh tissue prospectively during their routine dissection procedures. Most tissue banks are "project-driven" tumor banks, which are specialized collections of tumor samples on which their research is based. Systematic collection of all available tumor tissue is much rarer. High quality tissue banks need the collaboration of clinicians and basic scientists, but also the informed consent of patients and ethical approval. Through the standard operation procedure, snap frozen fresh tissue collection, storage and quality control for cryopreserved tissues are the pivotal factors on tissue bank construction and maintaining. The purpose of the tissue bank creation is enhancing the quality and speed on both the basic and translational research on gastrointestinal cancer. The quality assurance and quality control are handled based on reviewing HE staining slides or touch imprint cytology by pathologists.

48 CFR 46.312 - Construction contracts.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 1 2013-10-01 2013-10-01 false Construction contracts. 46... MANAGEMENT QUALITY ASSURANCE Contract Clauses 46.312 Construction contracts. The contracting officer shall insert the clause at 52.246-12, Inspection of Construction, in solicitations and contracts for...

48 CFR 46.312 - Construction contracts.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Construction contracts. 46... MANAGEMENT QUALITY ASSURANCE Contract Clauses 46.312 Construction contracts. The contracting officer shall insert the clause at 52.246-12, Inspection of Construction, in solicitations and contracts for...

48 CFR 546.312 - Construction contracts.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 4 2014-10-01 2014-10-01 false Construction contracts... CONTRACT MANAGEMENT QUALITY ASSURANCE Contract Clauses 546.312 Construction contracts. Insert the clause at 552.246-72, Final Inspection and Tests, in solicitations and contracts for construction that include...

48 CFR 546.312 - Construction contracts.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 4 2013-10-01 2013-10-01 false Construction contracts... CONTRACT MANAGEMENT QUALITY ASSURANCE Contract Clauses 546.312 Construction contracts. Insert the clause at 552.246-72, Final Inspection and Tests, in solicitations and contracts for construction that include...

48 CFR 46.312 - Construction contracts.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Construction contracts. 46... MANAGEMENT QUALITY ASSURANCE Contract Clauses 46.312 Construction contracts. The contracting officer shall insert the clause at 52.246-12, Inspection of Construction, in solicitations and contracts for...

48 CFR 546.312 - Construction contracts.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false Construction contracts... CONTRACT MANAGEMENT QUALITY ASSURANCE Contract Clauses 546.312 Construction contracts. Insert the clause at 552.246-72, Final Inspection and Tests, in solicitations and contracts for construction that include...

48 CFR 46.312 - Construction contracts.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 1 2014-10-01 2014-10-01 false Construction contracts. 46... MANAGEMENT QUALITY ASSURANCE Contract Clauses 46.312 Construction contracts. The contracting officer shall insert the clause at 52.246-12, Inspection of Construction, in solicitations and contracts for...

48 CFR 546.312 - Construction contracts.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 4 2012-10-01 2012-10-01 false Construction contracts... CONTRACT MANAGEMENT QUALITY ASSURANCE Contract Clauses 546.312 Construction contracts. Insert the clause at 552.246-72, Final Inspection and Tests, in solicitations and contracts for construction that include...

SELF-STIGMA AND COMING OUT ABOUT ONE’S MENTAL ILLNESS

PubMed Central

Corrigan, Patrick W.; Morris, Scott; Larson, Jon; Rafacz, Jennifer; Wassel, Abigail; Michaels, Patrick; Wilkniss, Sandra; Batia, Karen; Rüsch, Nicolas

2013-01-01

Self-stigma can undermine self-esteem and self-efficacy of people with serious mental illness. Coming out may be one way of handling self-stigma and it was expected that coming out would mediate the effects of self-stigma on quality of life. This study compares coming out to other approaches of controlling self-stigma. Eighty-five people with serious mental illness completed measures of coming out (called the Coming Out with Mental Illness Scale, COMIS), self-stigma, quality of life, and strategies for managing self-stigma. An exploratory factor analysis of the COMIS uncovered two constructs: benefits of being out (BBO) and reasons for staying in. A mediational analysis showed BBO diminished self-stigma effects on quality of life. A factor analysis of measures of managing self-stigma yielded three factors. Benefits of being out was associated with two of these: affirming strategies and becoming aloof, not with strategies of shame. Implications for how coming out enhances the person’s quality of life are discussed. PMID:23970807

SELF-STIGMA AND COMING OUT ABOUT ONE'S MENTAL ILLNESS.

PubMed

Corrigan, Patrick W; Morris, Scott; Larson, Jon; Rafacz, Jennifer; Wassel, Abigail; Michaels, Patrick; Wilkniss, Sandra; Batia, Karen; Rüsch, Nicolas

2010-04-01

Self-stigma can undermine self-esteem and self-efficacy of people with serious mental illness. Coming out may be one way of handling self-stigma and it was expected that coming out would mediate the effects of self-stigma on quality of life. This study compares coming out to other approaches of controlling self-stigma. Eighty-five people with serious mental illness completed measures of coming out (called the Coming Out with Mental Illness Scale, COMIS), self-stigma, quality of life, and strategies for managing self-stigma. An exploratory factor analysis of the COMIS uncovered two constructs: benefits of being out (BBO) and reasons for staying in. A mediational analysis showed BBO diminished self-stigma effects on quality of life. A factor analysis of measures of managing self-stigma yielded three factors. Benefits of being out was associated with two of these: affirming strategies and becoming aloof, not with strategies of shame. Implications for how coming out enhances the person's quality of life are discussed.

Development and system identification of a light unmanned aircraft for flying qualities research

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peters, M.E.; Andrisani, D. II

This paper describes the design, construction, flight testing and system identification of a light weight remotely piloted aircraft and its use in studying flying qualities in the longitudinal axis. The short period approximation to the longitudinal dynamics of the aircraft was used. Parameters in this model were determined a priori using various empirical estimators. These parameters were then estimated from flight data using a maximum likelihood parameter identification method. A comparison of the parameter values revealed that the stability derivatives obtained from the empirical estimators were reasonably close to the flight test results. However, the control derivatives determined by themore » empirical estimators were too large by a factor of two. The aircraft was also flown to determine how the longitudinal flying qualities of light weight remotely piloted aircraft compared to full size manned aircraft. It was shown that light weight remotely piloted aircraft require much faster short period dynamics to achieve level I flying qualities in an up-and-away flight task.« less

[Research on controlling iron release of desalted water transmitted in existing water distribution system].

PubMed

Tian, Yi-Mei; Liu, Yang; Zhao, Peng; Shan, Jin-Lin; Yang, Suo-Yin; Liu, Wei

2012-04-01

Desalted water, with strong corrosion characteristics, would possibly lead to serious "red water" when transmitted and distributed in existing municipal water distribution network. The main reason for red water phenomenon is iron release in water pipes. In order to study the methods of controlling iron release in existing drinking water distribution pipe, tubercle analysis of steel pipe and cast iron pipe, which have served the distribution system for 30-40 years, was carried out, the main construction materials were Fe3O4 and FeOOH; and immersion experiments were carried in more corrosive pipes. Through changing mixing volume of tap water and desalted water, pH, alkalinity, chloride and sulfate, the influence of different water quality indexes on iron release were mainly analyzed. Meanwhile, based on controlling iron content, water quality conditions were established to meet with the safety distribution of desalted water: volume ratio of potable water and desalted water should be higher than or equal to 2, pH was higher than 7.6, alkalinity was higher than 200 mg x L(-1).

Development and evaluation of an instantaneous atmospheric corrosion rate monitor

NASA Astrophysics Data System (ADS)

Mansfeld, F.; Jeanjaquet, S. L.; Kendig, M. W.; Roe, D. K.

1985-06-01

A research program was carried out in which a new instantaneous atmospheric corrosion rate monitor (ACRM) was developed and evaluated, and equipment was constructed which will allow the use of many sensors in an economical way in outdoor exposures. In the first task, the ACRM was developed and tested in flow chambers in which relative humidity and gaseous and particulate pollutant levels can be controlled. Diurnal cycles and periods of rain were simulated. The effects of aerosols were studied. A computerized system was used for collection, storage, and analysis of the electrochemical data. In the second task, a relatively inexpensive electronics system for control of the ACRM and measurement of atmospheric corrosion rates was designed and built. In the third task, calibration of deterioration rates of various metallic and nonmetallic materials with the response of the ACRMs attached to these materials was carried out under controlled environmental conditions using the system developed in the second task. A Quality Assurance project plan was prepared with inputs from the Rockwell International Environmental Monitoring and Service Center and Quality Assurance System audits were performed.

Stormwater Infrastructure in the Los Angeles Region: Are Regulatory Drivers and Opportunism the Best Approach to Clean Water?

NASA Astrophysics Data System (ADS)

Mika, K.; Gold, M.

2016-12-01

The Los Angeles region has invested nearly a billion dollars in stormwater infrastructure projects over the last 15 years. The primary drivers for these projects have been regulatory requirements under the Los Angeles County MS4 permit and Total Maximum Daily Loads (TMDLs) for over 150 impaired water bodies in the region. In addition, voters in the state of California have approved five separate water bonds over the last 15 years totaling nearly 21 billion. The City of Los Angeles approved a 500 million stormwater bond in 2004 to construct best management practices (BMPs) to help the city comply with water quality standards. There have also been numerous comprehensive Low Impact Development (LID) ordinances approved in the region that are designed to ensure that new and redevelopment capture for reuse or infiltrate 100% of the runoff generated from the 85th percentile storm. This presentation will overview an assessment of decision-making related to the funding of stormwater BMPs in the region. Specific examples of constructed BMPs, including their performance for meeting water quality standards, will be provided. Among the shortcomings of relying on a bond funding approach to new stormwater infrastructure is a California statutory prohibition on using bond funds for BMP operations and maintenance. The advantages of a systematic structural BMP sizing, designing and siting approach based on optimizing multiple beneficial uses (water quality, flood control, water supply, habitat and recreation) across watersheds or subwatersheds will also be discussed. Integration of stormwater infrastructure construction with transportation improvement projects, as well as building retrofit upon sale requirements, will greatly expedite regional transformation to green stormwater infrastructure.

76 FR 62894 - Agency Information Collection Activities: Notice of Request for Renewal of a Previously Approved...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-11

... innovative technologies that will improve safety, reduce congestion due to construction, and improve quality... project, the innovative technologies to be used and a description of how these technologies will improve safety, reduce construction congestion, and improve quality. The collected information will be used by...

Bees Algorithm for Construction of Multiple Test Forms in E-Testing

ERIC Educational Resources Information Center

Songmuang, Pokpong; Ueno, Maomi

2011-01-01

The purpose of this research is to automatically construct multiple equivalent test forms that have equivalent qualities indicated by test information functions based on item response theory. There has been a trade-off in previous studies between the computational costs and the equivalent qualities of test forms. To alleviate this problem, we…

Evaluation and use of the Materials and Test (MATT) Data System for quality of construction and management review : final report.

DOT National Transportation Integrated Search

1985-12-01

This report documents the review of the MATerials and Test (MATT) Data System to check the validity of data within the system. A computer program to generate the quality level of a construction material was developed. Programs were also developed to ...

FNF Construction, Inc. Coverage under General Air Quality Permit for New or Modified Minor Source Hot Mix Asphalt Plants in Indian Country

EPA Pesticide Factsheets

Documents related to the FNF Construction, Inc. Request for Coverage under the General Air Quality Permit for New or Modified Minor Source Hot Mix Asphalt Plants in Indian Country to be Located near Ganado, Arizona on the Navajo Nation.

Elementary Teachers' Learning to Construct High-Quality Mathematics Lesson Plans: A Use of the IES Recommendations

ERIC Educational Resources Information Center

Ding, Meixia; Carlson, Mary Alice

2013-01-01

This study explored a group of elementary teachers' ("n" = 35) learning to construct high-quality lesson plans that foster student understanding of fundamental mathematical ideas. The conceptual framework for this study was gleaned from the recently released Institute of Education Sciences (IES) recommendations, including (a)…

Environmental Assessment All-Terrain Vehicle Training Area at Grand Forks AFB, North Dakota

DTIC Science & Technology

2004-03-17

during actual construction, and over the long-term due to reduced storm water quality caused by the increase of exposed soil. The short-term effects...actual construction, and over the long-term due to reduced storm water quality caused by the increase of exposed soil. The short-term effects come

Lyophilization process design space.

PubMed

Patel, Sajal Manubhai; Pikal, Michael J

2013-11-01

The application of key elements of quality by design (QbD), such as risk assessment, process analytical technology, and design space, is discussed widely as it relates to freeze-drying process design and development. However, this commentary focuses on constructing the Design and Control Space, particularly for the primary drying step of the freeze-drying process. Also, practical applications and considerations of claiming a process Design Space under the QbD paradigm have been discussed. © 2013 Wiley Periodicals, Inc. and the American Pharmacists Association.

Reconstruction Error and Principal Component Based Anomaly Detection in Hyperspectral Imagery

DTIC Science & Technology

2014-03-27

2003), and (Jackson D. A., 1993). In 1933, Hotelling ( Hotelling , 1933), who coined the term ‘principal components,’ surmised that there was a...goodness of fit and multivariate quality control with the statistic Qi = (Xi(1×p) − X̂i(1×p) )(Xi(1×p) − X̂i(1×p) ) T (20) where, under the...sparsely targeted scenes through SNR or other methods. 5) Customize sorting and histogram construction methods in Multiple PCA to avoid redundancy

The National Shipbuilding Research Program. Survey of Air and Water Quality Pollution Prevention and Control Technology Used in Shipyards and Similar Industries

DTIC Science & Technology

1998-01-09

vehicle washing 3. TSP and citric acid for bilge cleaning 1. no capture and filtration of weld fumes 8 1. black beauty abrasives 2...treatment 1. not treated N/A 12 N/A 1. treated on-site. with gravity oil water separator, acid cracking of the emulsion layer and parallel...less energy-intensive treatment technologies such as constructed wetlands for sewage treatment and anoxic limestone drains for acid mine drainage

A scalable, fully automated process for construction of sequence-ready human exome targeted capture libraries

PubMed Central

2011-01-01

Genome targeting methods enable cost-effective capture of specific subsets of the genome for sequencing. We present here an automated, highly scalable method for carrying out the Solution Hybrid Selection capture approach that provides a dramatic increase in scale and throughput of sequence-ready libraries produced. Significant process improvements and a series of in-process quality control checkpoints are also added. These process improvements can also be used in a manual version of the protocol. PMID:21205303

Characterizations of a quality certified athletic trainer.

PubMed

Raab, Scot; Wolfe, Brent D; Gould, Trenton E; Piland, Scott G

2011-01-01

Didactic proficiency does not ensure clinical aptitude. Quality athletic health care requires clinical knowledge and affective traits. To develop a grounded theory explaining the constructs of a quality certified athletic trainer (AT). Delphi study. Interviews in conference rooms or business offices and by telephone. Thirteen ATs (men = 8, women = 5) stratified across the largest employment settings (high school, college, clinical) in the 4 largest districts of the National Athletic Trainers? Association (2, 3, 4, 9). Open-ended interview questions were audio recorded, transcribed, and reviewed before condensing. Two member checks ensured trustworthiness. Open coding reduced text to descriptive adjectives. We grouped adjectives into 5 constructs (care, communication, commitment, integrity, knowledge) and grouped these constructs into 2 higher-order constructs (affective traits, effective traits). According to participants, ATs who demonstrate the ability to care, show commitment and integrity, value professional knowledge, and communicate effectively with others can be identified as quality ATs. These abilities facilitate the creation of positive relationships. These relationships allow the quality AT to interact with patients and other health care professionals on a knowledgeable basis that ultimately improves health care delivery. Our resulting theory supported the examination of characteristics not traditionally assessed in an athletic training education program. If researchers can show that these characteristics develop ATs into quality ATs (eg, those who work better with others, relate meaningfully with patients, and improve the standard of health care), they must be cultivated in the educational setting.

Does price reveal poor-quality drugs? Evidence from 17 countries.

PubMed

Bate, Roger; Jin, Ginger Zhe; Mathur, Aparna

2011-12-01

Focusing on 8 drug types on the WHO-approved medicine list, we constructed an original dataset of 899 drug samples from 17 low- and median-income countries and tested them for visual appearance, disintegration, and analyzed their ingredients by chromatography and spectrometry. Fifteen percent of the samples fail at least one test and can be considered substandard. After controlling for local factors, we find that failing drugs are priced 13.6-18.7% lower than non-failing drugs but the signaling effect of price is far from complete, especially for non-innovator brands. The look of the pharmacy, as assessed by our covert shoppers, is weakly correlated with the results of quality tests. These findings suggest that consumers are likely to suspect low quality from market price, non-innovator brand and the look of the pharmacy, but none of these signals can perfectly identify substandard and counterfeit drugs. Copyright © 2011 Elsevier B.V. All rights reserved.

Quality of life in children with epilepsy.

PubMed

Nadkarni, Jayashree; Jain, Arti; Dwivedi, Rashmi

2011-10-01

Epilepsy is a chronic medical condition with many co-morbid features. It has been observed that children with epilepsy (CWE) have a compromised quality of life (QOL). To assess the QOL in CWE and to study the various factors affecting QOL among CWE. The sample consisted of 102 CWE aged 5-15 years of either sex. QOL was measured by Quality of Life in Childhood Epilepsy (QOLCE) questionnaire, a 76-item, parent-reported questionnaire. Cronbach alpha was used to determine the internal consistency of the subscales and Pearson correlation to determine construct validity. The t-test and analysis of variance were used to compare mean QOLCE scores. Factors affecting QOL included age, place of residence, socioeconomic condition, maternal education, seizure type and frequency and number of antiepileptic drugs. CWE have a relatively compromised QOL and comprehensive care needs to go beyond the attempt of controlling seizures.

Quality of life in children with epilepsy

PubMed Central

Nadkarni, Jayashree; Jain, Arti; Dwivedi, Rashmi

2011-01-01

Background: Epilepsy is a chronic medical condition with many co-morbid features. It has been observed that children with epilepsy (CWE) have a compromised quality of life (QOL). Objective: To assess the QOL in CWE and to study the various factors affecting QOL among CWE. Materials and Methods: The sample consisted of 102 CWE aged 5–15 years of either sex. QOL was measured by Quality of Life in Childhood Epilepsy (QOLCE) questionnaire, a 76-item, parent-reported questionnaire. Cronbach alpha was used to determine the internal consistency of the subscales and Pearson correlation to determine construct validity. The t-test and analysis of variance were used to compare mean QOLCE scores. Results: Factors affecting QOL included age, place of residence, socioeconomic condition, maternal education, seizure type and frequency and number of antiepileptic drugs. Conclusion: CWE have a relatively compromised QOL and comprehensive care needs to go beyond the attempt of controlling seizures. PMID:22346017