Factors Influencing Implementation of OHSAS 18001 in Indian Construction Organizations: Interpretive Structural Modeling Approach

PubMed Central

Rajaprasad, Sunku Venkata Siva; Chalapathi, Pasupulati Venkata

2015-01-01

Background Construction activity has made considerable breakthroughs in the past two decades on the back of increases in development activities, government policies, and public demand. At the same time, occupational health and safety issues have become a major concern to construction organizations. The unsatisfactory safety performance of the construction industry has always been highlighted since the safety management system is neglected area and not implemented systematically in Indian construction organizations. Due to a lack of enforcement of the applicable legislation, most of the construction organizations are forced to opt for the implementation of Occupational Health Safety Assessment Series (OHSAS) 18001 to improve safety performance. Methods In order to better understand factors influencing the implementation of OHSAS 18001, an interpretive structural modeling approach has been applied and the factors have been classified using matrice d'impacts croises-multiplication appliqué a un classement (MICMAC) analysis. The study proposes the underlying theoretical framework to identify factors and to help management of Indian construction organizations to understand the interaction among factors influencing in implementation of OHSAS 18001. Results Safety culture, continual improvement, morale of employees, and safety training have been identified as dependent variables. Safety performance, sustainable construction, and conducive working environment have been identified as linkage variables. Management commitment and safety policy have been identified as the driver variables. Conclusion Management commitment has the maximum driving power and the most influential factor is safety policy, which states clearly the commitment of top management towards occupational safety and health. PMID:26929828

Group Chaos Theory: A Metaphor and Model for Group Work

ERIC Educational Resources Information Center

Rivera, Edil Torres; Wilbur, Michael; Frank-Saraceni, James; Roberts-Wilbur, Janice; Phan, Loan T.; Garrett, Michael T.

2005-01-01

Group phenomena and interactions are described through the use of the chaos theory constructs and characteristics of sensitive dependence on initial conditions, phase space, turbulence, emergence, self-organization, dissipation, iteration, bifurcation, and attractors and fractals. These constructs and theoretical tenets are presented as applicable…

Beyond Family-Friendly: The Construct and Measurement of Singles-Friendly Work Culture

ERIC Educational Resources Information Center

Casper, Wendy J.; Weltman, David; Kwesiga, Eileen

2007-01-01

Although research has examined work-family issues and organizational support for employees' family responsibilities, few studies have explored the work-life issues of single employees without children. The current study examines single employees' perceptions of how their organizations support their work-life balance in comparison to employees with…

The Industrial Perspective

DTIC Science & Technology

1989-09-01

projections of planned construction, overhaul and repair work from both the public and commercial sectors can never sustain the industry at a level which...and other government organizations to support the Shipyard Recovery Plan and the revitalization of commercial shipbuilding in America. Expanding...engineer sitting next to the organization that does work package planning on ships and from the fleet. It won’t be, at least in these competitive firms

Video Storytelling in a Transient, Volunteer Organization

ERIC Educational Resources Information Center

Katzeff, Cecilia; Ware, Vanessa

2007-01-01

To make sense of and learn about work environments, people actively construct their own knowledge and share stories of their experience. Telling stories is particularly challenging in a transient organization where people are hired on a voluntary, temporary basis. Such is the case of a nonprofit music festival organization in Sweden, which is…

Participatory Training to Improve Safety and Health in Small Construction Sites in Some Countries in Asia: Development and Application of the WISCON Training Program.

PubMed

Kawakami, Tsuyoshi

2016-08-01

A participatory training program, Work Improvement in Small Construction Sites, was developed to provide practical support measures to the small construction sector. Managers and workers from selected small sites were interviewed about their occupational safety and health risks. The Work Improvement in Small Construction Sites training program comprised a 45-item action checklist, photos, and illustrations showing local examples and group work methods. Pilot training workshops were carried out with workers and employers in Cambodia, Laos, Mongolia, Thailand, and Vietnam. Participants subsequently planned, and using locally available low-cost materials, implemented their own improvements such as hand-made hand trucks to carry heavy materials, removal of projecting nails from timber materials, and fences to protect roof workers from falling. Local Work Improvement in Small Construction Sites trainers consisting of government officials, workers, employers, and nongovernment organization representatives were then trained to implement the Work Improvement in Small Construction Sites training widely. Keys to success were easy-to-apply training tools aiming at immediate, low-cost improvements, and collaboration with various local people's networks. © The Author(s) 2016.

The "Goldilocks model" of overtime in construction: not too much, not too little, but just right.

PubMed

Goldenhar, Linda M; Hecker, Steven; Moir, Susan; Rosecrance, John

2003-01-01

Little research exists on the relationship between working overtime and possible adverse health and safety outcomes for construction workers. Five focus-group discussions were conducted with construction workers from around the United States. From the analyzed transcripts, a model of overtime was developed. The model includes three dominant themes: (1) work organization issues [(a) definitions of overtime, (b) scheduling, and (c) economic conditions], (2) why workers choose to work overtime [(a) management expectations, (b) career, and (c) money], and (3) the effects of working overtime [(a) health and safety, including sleep deprivation, injury, fatigue, and stress, and (b) productivity]. Health and safety is only one of the adverse outcomes related to working too much overtime. A list of worker-inspired recommendations for addressing overtime issues is provided. Both employers and workers need to better understand the potential adverse effects of working too much overtime.

Organizations Working to Reduce the Disposal of Construction and Demolition (C&D) Materials

EPA Pesticide Factsheets

Organizations with available resources and services related to reducing, reducing, and recycling C&D Materials? This table is a great place to start! Use the three tabs below to easily sort the data and best meet your needs.

Prevalence, source and severity of work-related injuries among "foreign" construction workers in a large Malaysian organisation: a cross-sectional study.

PubMed

Zerguine, Haroun; Tamrin, Shamsul Bahri Mohd; Jalaludin, Juliana

2018-06-01

Malaysian construction sector is regarded as critical in the field of health because of the high rates of accidents and fatalities. This research aimed to determine the prevalence, sources and severity of injuries and its association with commitment to safety among foreign construction workers. A cross-sectional study was conducted among 323 foreign construction workers from six construction projects of a large organization in Malaysia, using a simple random sampling method. Data was collected using a structured questionnaire to assess work-related injuries and safety commitment. The collected data was analysed by SPSS 22.0 using descriptive statistics and χ 2 test. The prevalence of work-related injuries in a one year period was 22.6%, where most of the injuries were of moderate severity (39.7%) and falls from heights represented the main source (31.5%). The majority of the foreign construction workers had perceived between moderate and high safety commitment, which was significantly associated with work-related injuries. The results also showed a significant association of work-related injuries with the company's interest in Safety and Health, Safety and Health training, and safety equipment. Thus, the implementation of new procedures and providing relevant trainings and safety equipment; will lead to a decrease in injury rates in construction sites.

A physiological exploration on operational stance and occupational musculoskeletal problem manifestations amongst construction labourers of West Bengal, India.

PubMed

Chatterjee, Arijit; Sahu, Subhashis

2018-03-29

A huge number of labourers engaged in construction industry in India both in organized and unorganized sectors. The construction labourers most often work for an extended period of time and they are compelled to uphold altered static and dynamic operational stance in awkward positions during the complete period of work which raises the demand on the musculoskeletal system and may lead to work related musculoskeletal disorders (WRMSDs). This study is intended to explore the operational stance and occupation related musculoskeletal manifestations amongst the construction labourers. One sixty four male labourers from different construction sites of West Bengal was randomly taken for this study. A modified Nordic questionnaire on MSD and the 12 item General Health Questionnaire (GHQ12) were administered on the construction labourers. Rapid Entire Body Assessment [REBA] and Ovako Work Analysis System [OWAS] methods were applied to analyze the operational stance. Finally, discomfort levels of the specific operational stance were calculated by the use of risk level and BPD scale. From the study it was revealed that most of the construction labourers habitually in awkward operational stance and were affected by altering musculoskeletal manifestations like pain in low back, neck, and wrist. It has been also found that there is a significant (p< 0.05) association between the intensity of pain feeling, age, year of working experience and risk level of the individual working postures of the labourers. Appropriate work-rest schedule, amendments of some working techniques and use of some ergonomically designed equipment may lessen the WRMSDs and improve the health eminence of construction labourers in unorganized sectors.

Constructing service-oriented architecture adoption maturity matrix using Kano model

NASA Astrophysics Data System (ADS)

Hamzah, Mohd Hamdi Irwan; Baharom, Fauziah; Mohd, Haslina

2017-10-01

Commonly, organizations adopted Service-Oriented Architecture (SOA) because it can provide a flexible reconfiguration and can reduce the development time and cost. In order to guide the SOA adoption, previous industry and academia have constructed SOA maturity model. However, there is a limited number of works on how to construct the matrix in the previous SOA maturity model. Therefore, this study is going to provide a method that can be used in order to construct the matrix in the SOA maturity model. This study adapts Kano Model to construct the cross evaluation matrix focused on SOA adoption IT and business benefits. This study found that Kano Model can provide a suitable and appropriate method for constructing the cross evaluation matrix in SOA maturity model. Kano model also can be used to plot, organize and better represent the evaluation dimension for evaluating the SOA adoption.

Moving Women from School to Work in Science: Curriculum Demands/adult Identities. And Life Transitions

NASA Astrophysics Data System (ADS)

Eisenhart, Margaret

This article proposes that the organization of some college curriculum programs as well as some workplaces presents special and perhaps unnecessary obstacles to women who might pursue science or engineering. The article begins with a framework for thinking about connections between school and work in various fields. This section reveals important differences in the way college degree programs are organized and in their implications for the transition to work. Some programs, such as in physics, construct a "tight" link between school and work; others, such as in sociology, construct much looser links. The article proceeds by reviewing results of previous ethnographic research about women's actual experiences in college and work. This section suggests that during the period of transition from college to work, women face special cultural demands that interfere with their pursuit of degrees in tight programs. Joining the lessons from the two preceding sections, the argument is made that the tight organization of some college and workplace environments asks more of women than they can give and helps explain why women continue to be under represented in some fields. The argument has testable Implications for the design of curricularprogramsana'workplace environments that might attract more women (and perhaps more minorities and men) to science and engineering.

Investigating risk factors for slips, trips and falls in New Zealand residential construction using incident-centred and incident-independent methods.

PubMed

Bentley, Tim A; Hide, Sophie; Tappin, David; Moore, Dave; Legg, Stephen; Ashby, Liz; Parker, Richard

2006-01-15

Slip, trip and fall (STF) incidents, particularly falls from a height, are a leading cause of injury in the New Zealand residential construction industry. The most common origins of falls from a height in this sector are ladders, scaffolding and roofs, while slipping is the most frequent fall initiating event category. The study aimed to provide detailed information on construction industry STF risk factors for high-risk tasks, work equipment and environments, as identified from an earlier analysis of STF claims data, together with information to be used in the development of interventions to reduce STF risk in New Zealand residential construction. The study involved the use of both incident-centred and incident-independent methods of investigation, including detailed follow-up investigations of incidents and observations and interviews with workers on construction sites, to provide data on a wide range of risk factors. A large number of risk factors for residential construction STFs were identified, including factors related to the work environment, tasks and the use and availability of appropriate height work equipment. The different methods of investigation produced complementary information on factors related to equipment design and work organization, which underlie some of the site conditions and work practices identified as key risk factors for residential construction STFs. A conceptual systems model of residential construction STF risk is presented.

The City and the Self: The Case of Girls' Protection in the Netherlands around 1900.

ERIC Educational Resources Information Center

van Drenth, Annemieke

2002-01-01

Examines educational activities organized by local committees and women's organizations in 19th-century Netherlands to protect working girls from prostitution. Places these activities in the context of the social construction of gender identity. (Contains 27 references.) (SK)

Mycoplasma pneumoniae, an Underutilized Model for Bacterial Cell Biology

PubMed Central

2014-01-01

In recent decades, bacterial cell biology has seen great advances, and numerous model systems have been developed to study a wide variety of cellular processes, including cell division, motility, assembly of macromolecular structures, and biogenesis of cell polarity. Considerable attention has been given to these model organisms, which include Escherichia coli, Bacillus subtilis, Caulobacter crescentus, and Myxococcus xanthus. Studies of these processes in the pathogenic bacterium Mycoplasma pneumoniae and its close relatives have also been carried out on a smaller scale, but this work is often overlooked, in part due to this organism's reputation as minimalistic and simple. In this minireview, I discuss recent work on the role of the M. pneumoniae attachment organelle (AO), a structure required for adherence to host cells, in these processes. The AO is constructed from proteins that generally lack homology to those found in other organisms, and this construction occurs in coordination with cell cycle events. The proteins of the M. pneumoniae AO share compositional features with proteins with related roles in model organisms. Once constructed, the AO becomes activated for its role in a form of gliding motility whose underlying mechanism appears to be distinct from that of other gliding bacteria, including Mycoplasma mobile. Together with the FtsZ cytoskeletal protein, motility participates in the cell division process. My intention is to bring this deceptively complex organism into alignment with the better-known model systems. PMID:25157081

Airfield construction (3rd revised and enlarged edition)

NASA Astrophysics Data System (ADS)

Goretskii, Leonid I.; Boguslavskii, Adol'f. M.; Serebrenikov, Vadim A.; Barzdo, V. I.; Leshchitskaia, T. P.; Polosin-Nikitin, S. M.

The principal engineering aspects of airfield construction are discussed. In particular, attention is given to the fundamental principles and organizational aspects of airfield construction; excavation work and airfield layout; construction of drainage systems; foundations and pavements; and quality control and safety engineering. The discussion also covers the operation of various support plants, including concrete production and mixing, production of asphalt-concrete mixtures and organic binders, production of structural steel and reinforced concrete components, and operation of stone quarries and gravel pits.

A multi-agent safety response model in the construction industry.

PubMed

Meliá, José L

2015-01-01

The construction industry is one of the sectors with the highest accident rates and the most serious accidents. A multi-agent safety response approach allows a useful diagnostic tool in order to understand factors affecting risk and accidents. The special features of the construction sector can influence the relationships among safety responses along the model of safety influences. The purpose of this paper is to test a model explaining risk and work-related accidents in the construction industry as a result of the safety responses of the organization, the supervisors, the co-workers and the worker. 374 construction employees belonging to 64 small Spanish construction companies working for two main companies participated in the study. Safety responses were measured using a 45-item Likert-type questionnaire. The structure of the measure was analyzed using factor analysis and the model of effects was tested using a structural equation model. Factor analysis clearly identifies the multi-agent safety dimensions hypothesized. The proposed safety response model of work-related accidents, involving construction specific results, showed a good fit. The multi-agent safety response approach to safety climate is a useful framework for the assessment of organizational and behavioral risks in construction.

4D modeling in high-rise construction

NASA Astrophysics Data System (ADS)

Balakina, Anastasiya; Simankina, Tatyana; Lukinov, Vitaly

2018-03-01

High-rise construction is a complex construction process, requiring the use of more perfected and sophisticated tools for design, planning and construction management. The use of BIM-technologies allows minimizing the risks associated with design errors and errors that occur during construction. This article discusses a visual planning method using the 4D model, which allows the project team to create an accurate and complete construction plan, which is much more difficult to achieve with the help of traditional planning methods. The use of the 4D model in the construction of a 70-story building allowed to detect spatial and temporal errors before the start of construction work. In addition to identifying design errors, 4D modeling has allowed to optimize the construction, as follows: to optimize the operation of cranes, the placement of building structures and materials at various stages of construction, to optimize the organization of work performance, as well as to monitor the activities related to the preparation of the construction site for compliance with labor protection and safety requirements, which resulted in saving money and time.

[Intervention methodology for training and information for workers of the building sector].

PubMed

Pedron, F; Zanin, T; Ferrante, D; Fania, E

2006-01-01

Regarding the seriousness of work-accident in Gorizia district, various organizations as ASL 2 "Isontina" (local health agency), INAIL of Friuli Venezia Giulia (National Institute for occupational accident insurance), trade unions and trade associations created a organization called "Observatory for Working-accidents and Professional Illness Prevention". The aim of this association is the promotion of safety in working environment. Diffusing importance of safety in building trade was the first projects of Observatory. So, Observatory carried an initiative to make more aware the workers. Than, it organized training courses for building workers. Moreover, the construction of an informative pamphlet on risks in building trade was made. For some experimental investigation, Observatory works with Department of Psychology, University of Trieste.

Inorganic-Organic Molecules and Solids with Nanometer-Sized Pores

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maverick, Andrew W

2011-12-17

We are constructing porous inorganic-organic hybrid molecules and solids, many of which contain coordinatively unsaturated metal centers. In this work, we use multifunctional ²-diketone ligands as building blocks to prepare extended-solid and molecular porous materials that are capable of reacting with a variety of guest molecules.

Empirical research on the influencing factors of the occupational stress for construction workers

NASA Astrophysics Data System (ADS)

LV, Xing; WU, Xiang; CI, Huipeng; LIU, Qing; YAO, Yongzheng

2017-04-01

Employee’s occupational stress and safety performance are highly related, which has been generally recognized by the researchers. We did this research to understand the status of the stress for construction workers, and explore the influence factors of pressure source with characteristics of construction industry. Based on the results of previous studies, we designed questionnaire to collect the influence factors on occupational stressors. The study selected workers from certain construction units at the grass-roots level as sample source. According to the results of the questionnaire, we redesigned the interview outline, and did the semi-structured interviews on workers randomly selected. Finally, we developed a scale which combined the characteristics of construction projects in China. Using SPSS software for factor analysis, reliability analysis, and descriptive statistical analysis, the results show that there are six factors affecting the workers’ occupational stress, including The Work Itself, Family-Work, Career Development, Organization Style, Interpersonal Relationship and Role Management Style. The work itself is the main sources of occupational stress. The results can be used by the construction company to provide guidance for workers to control and manage occupational stress.

Functionalized coronenes: synthesis, solid structure, and properties.

PubMed

Wu, Di; Zhang, Hua; Liang, Jinhua; Ge, Haojie; Chi, Chunyan; Wu, Jishan; Liu, Sheng Hua; Yin, Jun

2012-12-21

The construction of coronenes using simple building blocks is a challenging task. In this work, triphenylene was used as a building block to construct functionalized coronenes, and their solid structures and optoelectronic properties were investigated. The single crystal structures showed that coronenes have different packing motifs. Their good solubility and photostability make them potential solution-processable candidates for organic devices.

Women in the Construction Industry in the U.K.: a Cultural Discord?

NASA Astrophysics Data System (ADS)

Bagilhole, Barbara M.; Dainty, Andrew R. J.; Neale, Richard H.

The construction industry is the most male dominated of all industrial sectors in the United Kingdom. This article reports on a study that explored women's and men's experiences of working in the industry, focusing on how the cultural aspects of the workplace environment impinged upon women's career development. We interviewed more than 80 male and female construction professionals from large construction organizations, and compared their career accounts in order to establish the aspects of the workplace culture that had a gender-differentiated impact on progression. We found that construction organizations formed competitive "power" cultures where women's contributions were marginalized and their careers impeded through a combination of inflexible work practices and discriminatory behavior. These barriers to women's careers were maintained in small project teams by autonomous male operational managers. Their locus of control embraced recruitment, promotion, and staff development, which allowed them to sustain a workplace culture intolerant of nontraditional entrants. We conclude that this cultural environment is likely to remain problematic for women unless it can be changed in a way that values their contribution. This requires a radical shift in middle management attitudes, a departure from current organizational human resource management systems, and a wider acceptance of the need for cultural change within the industry.

Organizational wisdom.

PubMed

Limas, Michael J; Hansson, Robert O

2004-01-01

In recent years, much theoretical and empirical attention has focused on wisdom as a psychological construct. The development of wisdom is viewed as a positive aspect of aging, but also has a complement to more traditionally-studied domains of intelligence. Two studies, involving a total of 327 adults, examined how our understanding of the construct might be furthered by its application into specific, problematic contexts, and by having its utility assessed. This involved: 1) development of an instrument that related the elements of wisdom to the context of work organizations; 2) identification of the primary ways in which wisdom contributes to well-being in work organizations; and 3) identification of types of organizations (organizational cultures) most likely to need and value wise persons of influence in their midst. Results suggest that wisdom is of greatest consequence when it fills an important gap in what is offered by the organization's (or society's) formal structure. Where the culture has developed more formal institutions, structure, and principles to guide its activities and ensure fairness in how people are treated, there may be less need for informal sources of organizational wisdom.

Constructive Convergence: Imagery and Humanitarian Assistance

DTIC Science & Technology

2012-02-01

PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES...a dataset different projection , a transformation must be performed on the data that warps the original data into the new projection . Every time data...i Constructive Convergence: Imagery and Humanitarian Assistance Doug Hanchard Center for Technology and National

Constructing a Counternarrative: Students Informing Now (S.I.N.) Reframes Immigration and Education in the United States

ERIC Educational Resources Information Center

Dominguez, Neidi; Duarte, Yazmin; Espinosa, Pedro Joel; Martinez, Luis; Nygreen, Kysa; Perez, Renato; Ramirez, Izel; Saba, Mariella

2009-01-01

The work of Students Informing Now (S.I.N.), an immigrant student organization at the University of California, Santa Cruz, is described in this column. The authors argue that S.I.N.'s diverse activities and textual products construct a counternarrative that challenges and reframes the debate on undocumented students and immigration. Focusing on…

Auditing of suppliers as the requirement of quality management systems in construction

NASA Astrophysics Data System (ADS)

Harasymiuk, Jolanta; Barski, Janusz

2017-07-01

The choice of a supplier of construction materials can be important factor of increase or reduction of building works costs. Construction materials present from 40 for 70% of investment task depending on kind of works being provided for realization. There is necessity of estimate of suppliers from the point of view of effectiveness of construction undertaking and necessity from the point of view of conformity of taken operation by executives of construction job and objects within the confines of systems of managements quality being initiated in their organizations. The estimate of suppliers of construction materials and subexecutives of special works is formal requirement in quality management systems, which meets the requirements of the ISO 9001 standard. The aim of this paper is to show possibilities of making use of anaudit for estimate of credibility and reliability of the supplier of construction materials. The article describes kinds of audits, that were carried in quality management systems, with particular taking into consideration audits called as second-site. One characterizes the estimate criterions of qualitative ability and method of choice of the supplier of construction materials. The paper shows also propositions of exemplary questions, that would be estimated in audit process, the way of conducting of this estimate and conditionality of estimate.

Tubular Tissues and Organs of Human Body--Challenges in Regenerative Medicine.

PubMed

Góra, Aleksander; Pliszka, Damian; Mukherjee, Shayanti; Ramakrishna, Seeram

2016-01-01

Tissue engineering of tubular organs such as the blood vessel, trachea gastrointestinal tract, urinary tract are of the great interest due to the high amount of surgeries performed annually on those organs. Development in tissue engineering in recent years and promising results, showed need to investigate more complex constructs that need to be designed in special manner. Stent technology remain the most widely used procedure to restore functions of tubular tissues after cancer treatment, or after organ removal due to traumatic accidents. Tubular structures like blood vessels, intestines, and trachea have to work in specific environment at the boundary of the liquids, solids or air and surrounding tissues and ensure suitable separation between them. This brings additional challenges in tissue engineering science in order to construct complete organs by using combinations of various cells along with the support material systems. Here we give a comprehensive review of the tubular structures of the human body, in perspective of the current methods of treatment and progress in regenerative medicine that aims to develop fully functioning organs of tubular shape. Extensive analysis of the available literature has been done focusing on materials and methods of creations of such organs. This work describes the attempts to incorporate growth factors and drugs within the scaffolds to ensure localized drug release and enhance vascularization of the organ by attracting blood vessels to the site of implantation.

Bootstrapping of Life through Holonomy and Self-modification

NASA Astrophysics Data System (ADS)

Kazansky, Alexander B.

2010-11-01

Life on the Earth demonstrate not only adaptive, cognitive, particularly, anticipatory properties, but also active, transformative function to its local and global environment. As V. Vernadsky stated, life is a powerful geological force. Charles Darwin realized that too. In his last work [1] he proved, that earthworms through their vital activity in geological time scale are able to form and support contemporary structure of soil on the whole planet. Locally, through so-called process of niche construction [2] organisms virtually modifies abiotic and biotic factors of natural selection and thereby insert feedback loop in evolutionary process. Stigmergy [3] is one more form of indirect interaction of organisms via the environment by signs, left in local environment or just by performing working activity in swarms, leading to self-organization and coordination of actions in the process of refuges construction. In organization of life we can separate active, rigid, organism-like, autopoietic-like systems or less rigid, sympoietic, socio-biological type systems [4]. Nevertheless, all forms of life systems demonstrate so-called bootstrapping, or spontaneous process of self-organizing emergence. This process is feasible thanks to self-modification, and holonomy in their organization, or total reflexivity. Analysis of the role of indirect interactions in bootstrapping, made in this paper, is aimed at revealing relationships between concepts and making step to forming new systemic model of organization and evolution of special dual pair, biota and biosphere.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maurer, D.

In January 1986, the Becon Construction Company - an open-shop contractor based in Houston, Texas - mobilized a work force to a construction project location at the Belridge Oil Field, near Bakersfield, California. The construction craftsmen and helpers in Becon's work force were expected to improve their level of productivity as the work proceeded because of the knowledge and skills that they would acquire as a result of the repetitive nature of the work. As it was originally organized, the Becon HOTS project represented almost a pure laboratory environment in which to collect data concerning the learning effect on workermore » productivity as well as to statistically isolate the impact on productivity of such external factors as weather, absenteeism, turnover, and especially work methods improvement techniques and pay incentives. From the outset of the HOTS project, the project manager had established an accurate system to quantitatively measure and compare the total manhours that each crew - civil, mechanical, electrical, and prefabrication -- performed at individual HOTS construction locations. Additionally, it was initially assumed that the project manager would be relatively free to implement changes to the job site conditions involving incentive pay and work methods improvement. The subsequent effect of these changes on the productivity of separate work crews could then be evaluated in terms of measured manhours per crew per HOTS.« less

Guidelines for designing a digestive disease endoscopy unit: report of the World Endoscopy Organization.

PubMed

Mulder, Chris J J; Jacobs, Maarten A J M; Leicester, Roger J; Nageshwar Reddy, D; Shepherd, Libby E A; Axon, Anthony T; Waye, Jerome D

2013-07-01

A dedicated digestive disease endoscopy unit is structurally and functionally differentiating rapidly as a result of increasing diagnostic and therapeutic possibilities in the last 10-20 years. Publications with practical details are scarce, imposing a challenge in the construction of such a unit. The lack of authoritative information about endoscopy unit design means that architects produce their own design with or without consulting endoscopists working in such a unit. A working group of the World Endoscopy Organization discussed and outlined a practical approach fordesign and construction of a modern endoscopy unit. Designing the layout is extremely important, necessitating thoughtful planning to provide comfort to the endoscopy staff and patients, and efficient data archiving and transmission during endoscopic services. © 2013 The Authors. Digestive Endoscopy © 2013 Japan Gastroenterological Endoscopy Society.

Laying the Foundations for Scientometric Research: A Data Science Approach

ERIC Educational Resources Information Center

Perron, Brian E.; Victor, Bryan G.; Hodge, David R.; Salas-Wright, Christopher P.; Vaughn, Michael G.; Taylor, Robert Joseph

2017-01-01

Objective: Scientometric studies of social work have stagnated due to problems with the organization and structure of the disciplinary literature. This study utilized data science to produce a set of research tools to overcome these methodological challenges. Method: We constructed a comprehensive list of social work journals for a 25-year time…

Investigating Relationships between Sense of Belonging and Organizational Citizenship Behavior among Adjunct Faculty

ERIC Educational Resources Information Center

Edgren, Gerald R., Jr.

2012-01-01

Organizational citizenship behavior (OCB) is a social science construct defined by Organ (1988) as employee actions that are discretionary, not formally recognized or rewarded, and that are helpful to the effectiveness of the organization. This study explored part-time work as a base of OCB by investigating the relationship between this construct…

The Changing Nature of Organizational Leadership and Culture in Academic Work

ERIC Educational Resources Information Center

Tierney, William G.

2006-01-01

The author argues that leadership is a cultural construct embedded in symbolic processes. By culture, the author refers to the informal codes and shared assumptions of individuals who participate in an organization. An organization's members shape and are shaped by the symbols and rituals of the institution as well as the unique history from which…

Discursive construction of polyphony in healthcare management.

PubMed

Hujala, Anneli; Rissanen, Sari

2012-01-01

The aim of the paper is to understand and define how the polyphony of management is constructed in interaction and to describe this through concrete management meeting cases. Polyphony refers to the diverse voices of various organization members, and how these voices are present, disclosed and utilized in management. The study is based on the social constructionist and discursive perspectives of management, which question the traditional, individualistic approaches of management. The issue was examined through a qualitative case study by analysing the micro-level management discourse in three healthcare organizations. Discursive practices that enhance or inhibit polyphony are often unnoticed and unconscious. Key moments of management discourse are an example of unconscious mundane practices through which members of organizations construct the reality of management. The empirical results are locally contextual. In the future, research will be able to apply the approach to diverse contexts as well as link micro-level discourses to the construction of broader health and social management discourses. The paper increases the understanding of how to enhance participation and staff contribution, and how to utilize the knowledge of all members of the organization. Both managers and other staff members are fully involved in the social construction of management. Micro-level discourse should be paid attention to in management work as well as in the education of managers and staff. The study increases the understanding of micro-level issues of management and challenges the conventional, taken-for-granted assumptions behind organization and management theories.

Construction of Metal-Organic Framework/Conductive Polymer Hybrid for All-Solid-State Fabric Supercapacitor.

PubMed

Qi, Kai; Hou, Ruizuo; Zaman, Shahid; Qiu, Yubing; Xia, Bao Yu; Duan, Hongwei

2018-05-30

Metal-organic frameworks (MOFs) hold promising potential in energy storage but are limited by poor conductivity. In this work, a metal-organic framework/polypyrrole hybrid is constructed by a facile one-pot electrodeposition method in the presence of dopamine. An all-solid-state fabric supercapacitor based on this hybrid demonstrates excellent electrochemical energy-storage performance, which achieves a specific capacitance of 10 mF cm -1 (206 mF cm -2 ), a power density of 132 μW cm -1 (2102 μW cm -2 ), and an energy density of 0.8 μWh cm -1 (12.8 μWh cm -2 ). The stable cycling life and excellent mechanical flexibility over a wide range of working temperature are also achieved, which maintains a capacitance retention of 89% over 10 000 charging/discharging cycles, a capacitance decrease of only 4% after 1000 frizzy (360° bending) cycles, and no obvious capacitance loss under 100 repeated heating (100 °C)/cooling (-15 °C) cycles. This fibrous supercapacitor displays promising potential in wearable textile electronics as it can be easily woven into common cotton cloth. Our strategy may shed some valuable light on the construction of MOF-based hybrids for flexible energy-storage electronics.

Hong Kong - The Hong Kong Alliance of Patients' Organizations: Working constructively to increase hospital openness and accountability.

PubMed

2014-01-01

The Hong Kong Alliance of Patients' Organizations (HI(APO) comprises 44 affiliated patient groups who advocate across the region, improving patient experiences and increasing advocacy and awareness. Initially established to increase accountability to patients and representation in a changing health system, the Alliance has worked to expand patient input on local and territorial decision-making by partnering with individual hospitals and increasing links with the Hospital Authority Board. Patients are now represented on most committees affecting patient care and the delivery of health services, and more widely in health care policy decision-making. The Alliance advocates for patients as active and constructive consumers rather than passive recipients of services and lobbies for better representation and involvement in treatment decisions. It has also increased media exposure which has helped to grow representation so that patients are now present on all 11 Authority Committees and are asked for their views. The patient ambassadors programme offers training for patients to be representatives at ward level and within the local hospital committee; and by building constructive relationships over time with hospital partners, HKAPO affiliate organizations have been able to start making improvements in the training of professionals in hospitals and informing staff about patient engagement, advocating for new clinical interventions and a more patient-centred approach.

The NIOSH Construction Program: research to practice, impact, and developing a National Construction Agenda.

PubMed

Gillen, Matt

2010-06-01

The U.S. National Institute for Occupational Safety and Health (NIOSH) conducts research to improve and protect the health and safety of workers. This paper describes the experience of the NIOSH Construction Program with two recent program planning initiatives intended to improve the program: (a) an independent external review of work over the past decade and (b) the development of strategic goals organized into a "National Construction Agenda" to guide a decade of future work. These goals, developed with input from construction industry stakeholders and researchers, are a part of the NIOSH National Occupational Research Agenda (NORA) initiative. The NORA goals are intended to provide an ambitious set of goals for all construction stakeholders to work together on. Both efforts relate to insuring the relevance and impact of research, reflecting an emerging policy perspective that research programs should be judged not just by the quality and quantity of science produced, but by the industry impact and tangible benefit resulting from the research. This paper describes how views on research planning have evolved to incorporate lessons learned about how research leads to improved safety and health for workers. It also describes the process used to develop the goals and the resulting strategic and intermediate goals that comprise the National Construction Agenda. (c) 2010 Elsevier Ltd. All rights reserved.

Breast Cancer Research at NASA

NASA Technical Reports Server (NTRS)

1998-01-01

Epithelial and fibroblast cell coculture: Long-term growth human mammary epithelial cells (HMEC) admixed in coculture with fibroblast from the same initial breast tissue grown as 3-dimenstional constructions in the presence of attachment beads in the NASA Bioreactor. A: A typical constrct about 2.0 mm in diameter without beads on the surface. The center of these constrcts is hollow, and beads are organized about the irner surface. Although the coculture provides smaller constructs than the monoculture, the metabolic of the organized cells is about the same. B, C, D: Closer views of cells showing that the shape of cells and cell-to-cell interactions apprear different in the coculture than in the monoculture constructs. NASA's Marshall Space Flight Center (MSFC) is sponsoring research with Bioreactors, rotating wall vessels designed to grow tissue samples in space, to understand how breast cancer works. This ground-based work studies the growth and assembly of human mammary epithelial cell (HMEC) from breast cancer susceptible tissue. Radiation can make the cells cancerous, thus allowing better comparisons of healthy vs. tunorous tissue. Credit: Dr. Robert Richmond, NASA/Marshall Space Flight Center (MSFC).

Microgravity

NASA Image and Video Library

1998-10-10

Epithelial and fibroblast cell coculture: Long-term growth human mammary epithelial cells (HMEC) admixed in coculture with fibroblast from the same initial breast tissue grown as 3-dimenstional constructions in the presence of attachment beads in the NASA Bioreactor. A: A typical constrct about 2.0 mm in diameter without beads on the surface. The center of these constrcts is hollow, and beads are organized about the irner surface. Although the coculture provides smaller constructs than the monoculture, the metabolic of the organized cells is about the same. B, C, D: Closer views of cells showing that the shape of cells and cell-to-cell interactions apprear different in the coculture than in the monoculture constructs. NASA's Marshall Space Flight Center (MSFC) is sponsoring research with Bioreactors, rotating wall vessels designed to grow tissue samples in space, to understand how breast cancer works. This ground-based work studies the growth and assembly of human mammary epithelial cell (HMEC) from breast cancer susceptible tissue. Radiation can make the cells cancerous, thus allowing better comparisons of healthy vs. tunorous tissue. Credit: Dr. Robert Richmond, NASA/Marshall Space Flight Center (MSFC).

Multidimensional relationships between paternalistic leadership and perceptions of organizational ethical climates.

PubMed

Wu, Yu-Chi; Tsai, Ping Ju

2012-10-01

This study investigated how paternalistic leadership is linked to ethical climates based on a multidimensional construct perspective. This experimental study utilized the partial least squares (PLS) techniques to analyze the data. Participants were 258 civil servants working in various public sectors in Taiwan, who were asked to rate their leaders' paternalistic leadership behaviors and their perception of the ethical climates in their organizations using the Paternalistic Leadership Scale and the Ethical Climate Questionnaire. Using the unidimensional constructs of paternalistic leadership and ethical climates, prior research showed vidence of a positive relationship; however, in the current study, multidimensional relations among these constructs may be positive or negative. The findings of this study suggested that leaders may implement specific types of paternalistic leadership to enhance the intended ethical climate in their organizations.

The Emergence of Family-specific Support Constructs: Cross-level Effects of Family-supportive Supervision and Family-Supportive Organization Perceptions on Individual Outcomes.

PubMed

Hill, Rachel T; Matthews, Russell A; Walsh, Benjamin M

2016-12-01

Implicit to the definitions of both family-supportive supervision (FSS) and family-supportive organization perceptions (FSOP) is the argument that these constructs may manifest at a higher (e.g. group or organizational) level. In line with these conceptualizations, grounded in tenants of conservation of resources theory, we argue that FSS and FSOP, as universal resources, are emergent constructs at the organizational level, which have cross-level effects on work-family conflict and turnover intentions. To test our theoretically derived hypotheses, a multilevel model was examined in which FSS and FSOP at the unit level predict individual work-to-family conflict, which in turn predicts turnover intentions. Our hypothesized model was generally supported. Collectively, our results point to FSOP serving as an explanatory mechanism of the effects that mutual perceptions of FSS have on individual experiences of work-to-family conflict and turnover intentions. Lagged (i.e. overtime) cross-level effects of the model were also confirmed in supplementary analyses. Our results extend our theoretical understanding of FSS and FSOP by demonstrating the utility of conceptualizing them as universal resources, opening up a variety of avenues for future research. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

An Organizational Perspective to the Creation of the Research Field.

PubMed

Talamo, Alessandra; Mellini, Barbara; Camilli, Marco; Ventura, Stefano; Di Lucchio, Loredana

2016-09-01

The aim of the paper is to contribute to the definition and analysis of the "access to the field" (Feldman et al. 2003) through an inter-organizational perspective. The paper discusses a case study on the access of a researcher to a hospital department where both organizations and actors are shown as actively constructing the research site. Both researcher and participants are described in terms of work organizations originally engaged in parallel systems of activity. Dynamics of negotiation "tied" the different actors' activities in a new activity system where researcher and participants concur to the effectiveness of both organizations (i.e., the research and the hospital ward). An Activity Theory perspective (Leont'ev 1978) is used with the aim of focusing the analysis on the activities in charge to the different actors. The approach adopted introduces the idea that, from the outset, research is made possible by a process of co-construction that works through the development of a completely new and shared work space arising around the encounter between researchers and participants. It is the balance between improvised actions and the co-creation of "boundary objects" (Star and Griesemer 1989), which makes interlacement possible between the two activity systems. The concept of "knotworking" (Engeström 2007a) is adopted to interpret specific actions by both organizations and actors intended to build a knot of activities whereby the new research system takes place.

Safety in construction--a comprehensive description of the characteristics of high safety standards in construction work, from the combined perspective of supervisors and experienced workers.

PubMed

Törner, Marianne; Pousette, Anders

2009-01-01

The often applied engineering approach to safety management in the construction industry needs to be supplemented by organizational measures and measures based on how people conceive and react to their social environment. This requires in-depth knowledge of the broad preconditions for high safety standards in construction. The aim of the study was to comprehensively describe the preconditions and components of high safety standards in the construction industry from the perspective of both experienced construction workers and first-line managers. Five worker safety representatives and 19 first-line managers were interviewed, all strategically selected from within a large Swedish construction project. Phenomenographic methodology was used for data acquisition and analysis and to categorize the information. Nine informants verified the results. The study identified four main categories of work safety preconditions and components: (1) Project characteristics and nature of the work, which set the limits of safety management; (2) Organization and structures, with the subcategories planning, work roles, procedures, and resources; (3) Collective values, norms, and behaviors, with the subcategories climate and culture, and interaction and cooperation; and (4) Individual competence and attitudes, with the subcategories knowledge, ability and experience, and individual attitudes. The results comprehensively describe high safety standards in construction, incorporating organizational, group, individual, and technical aspects. High-quality interaction between different organizational functions and hierarchical levels stood out as important aspects of safety. The results are discussed in relation to previous research into safety and into the social-psychological preconditions for other desired outcomes in occupational settings. The results can guide construction companies in planning and executing construction projects to a high safety standard.

Geography and Orienteering

ERIC Educational Resources Information Center

Adams, W. P.

1972-01-01

Orienteering is a rapidly growing sport, developed in Sweden, which has great possibilities for education in geography. It can be conceived as an organizing device for outdoor work and as a basis for developing map skills and for map construction. (Author)

Agent based model of effects of task allocation strategies in flat organizations

NASA Astrophysics Data System (ADS)

Sobkowicz, Pawel

2016-09-01

A common practice in many organizations is to pile the work on the best performers. It is easy to implement by the management and, despite the apparent injustice, appears to be working in many situations. In our work we present a simple agent based model, constructed to simulate this practice and to analyze conditions under which the overall efficiency of the organization (for example measured by the backlog of unresolved issues) breaks down, due to the cumulative effect of the individual overloads. The model confirms that the strategy mentioned above is, indeed, rational: it leads to better global results than an alternative one, using equal workload distribution among all workers. The presented analyses focus on the behavior of the organizations close to the limit of the maximum total throughput and provide results for the growth of the unprocessed backlog in several situations, as well as suggestions related to avoiding such buildup.

Occupational Safety and Health and Healthy Housing: A Review of Opportunities and Challenges.

PubMed

Jacobs, David E; Forst, Linda

Occupational safety and health (OSH) risks in construction of healthy housing (HH) have not been examined and collaboration between HH and OSH professionals is inadequate. The World Health Organization is developing international HH guidelines and the International Labour Organization is working to improve OSH in construction globally. We searched for exemplary reports (including gray literature) on construction hazards; preventive measures for occupants and workers; OSH frameworks, laws, and regulations; definitions; and HH. Healthy housing construction typically improves ventilation, moisture and mold, pest control, injury hazards, cleanability, maintenance, accessibility, thermal conditioning, and avoidance of toxic building materials. To date, this work is done without explicit requirements for worker health. Construction is among the most hazardous sectors around the globe, although protective measures are well known, including engineering and administrative controls and provision of personal protective equipment. Residential construction, renovation, repair, and maintenance are fragmented, consisting mostly of small companies without proper OSH training, equipment, and knowledge of HH principles. Residential construction is often undertaken by informal or unauthorized workers, putting them at high risk. Reduced exposure to toxic building materials is an example of a benefit for both workers and occupants if OSH and HH collaboration can be improved. By recognizing that homes under new construction or renovation are both a workplace and a residence, HH and OSH initiatives can apply public health principles to occupants and workers simultaneously. This article publishes key definitions, hazards and interventions common to both fields. A global increase in residential construction and renewed global interest in HH poses both risks and opportunities for primary prevention. Policy and practice interventions can benefit the health of occupants and those who work on their homes. Improvements in legislation, regulation, and international frameworks are needed to maximize OSH and HH collaboration and realize significant cobenefits. Occupational safety and health and HH standards should include requirements to protect both workers and occupants. Because homes can also be workplaces, both workers and housing occupants will receive important cobenefits when OSH and HH standards use proven interventions to protect workers and occupants.

Thinking and working relationally: interviewing and constructing hypotheses to create compassionate understanding.

PubMed

Sheinberg, Marcia; Brewster, Mary Kim

2014-12-01

In the initial interviews of family therapy sessions, the therapist faces the challenge of obtaining and organizing the information that is most relevant toward understanding the essential concerns that families and couples bring to therapy. This article describes the process of clinical interviewing and case conceptualization used in training family therapists at the Ackerman Institute for the Family. This approach helps the therapist bring forward, and organize, specific information into relational hypotheses, or systemic-relational conceptualizations, that allow both family members and the therapist to understand presenting problems within their relational contexts. While always provisional, relational hypotheses help anchor the therapist in a systemic-relational frame and provide a conceptual through-line to guide the ongoing work of the therapy. The process of interviewing and the construction of clear and complex conceptualizations of presenting problems are illustrated through case examples. © 2014 Family Process Institute.

Creating healthy work environments: a strategic perspective.

PubMed

Adamson, Bonnie J

2010-01-01

Although I find Graham Lowe and Ben Chan's logic model and work environment metrics thought provoking, a healthy work environment framework must be more comprehensive and consider the addition of recommended diagnostic tools, vehicles to deliver the necessary change and a sustainability strategy that allows for the tweaking and refinement of ideas. Basic structure is required to frame and initiate an effective process, while allowing creativity and enhancements to be made by organizations as they learn. I support the construction of a suggested Canadian health sector framework for measuring the health of an organization, but I feel that organizations need to have some freedom in that design and the ability to incorporate their own indicators within the established proven drivers. Reflecting on my organization's experience with large-scale transformation efforts, I find that emotional intelligence along with formal leadership development and front-line engagement in Lean process improvement activities are essential for creating healthy work environments that produce the balanced set of outcomes listed in my hospital's Balanced Scorecard.

What Is an Activity? Appropriating an Activity-Centric System

NASA Astrophysics Data System (ADS)

Yarosh, Svetlana; Matthews, Tara; Moran, Thomas P.; Smith, Barton

Activity-Centric Computing (ACC) systems seek to address the fragmentation of office work across tools and documents by allowing users to organize work around the computational construct of an Activity. Defining and structuring appropriate Activities within a system poses a challenge for users that must be overcome in order to benefit from ACC support. We know little about how knowledge workers appropriate the Activity construct. To address this, we studied users’ appropriation of a production-quality ACC system, Lotus Activities, for everyday work by employees in a large corporation. We contribute to a better understanding of how users articulate their individual and collaborative work in the system by providing empirical evidence of their patterns of appropriation. We conclude by discussing how our findings can inform the design of other ACC systems for the workplace.

London 2012: occupational health in the construction programme.

PubMed

Waterman, Lawrence

2007-05-01

This article explores the approach to occupational health in the UK construction industry in both broad and narrow contexts. The construction programme for the 2012 Olympic Games and Paralympic Games includes the creation of a large urban park in east London containing many sports venues and served by enhanced infrastructure. The Olympic Delivery Authority (ODA), responsible for the construction programme, is developing plans that seek to assure the health of the thousands of workers who will be engaged in this work. Such plans are not being drafted in a vacuum. In addition to considerable consultation with stakeholders the ODA is also drawing on some of the exciting work that has been undertaken in occupational health in recent years. In particular, the move from a focus on technical health services provided by 'experts' to an acceptance that health issues should be managed within employing organizations. Understanding this broad context provides a solid basis for analysing the specific proposals for occupational support during the Olympic Park construction.

Assessing Barriers to the Use of Fall Protection in Small Residential Construction Companies in New Jersey.

PubMed

Borjan, Marija; Patel, Toral; Lefkowitz, Daniel; Campbell, Carla; Lumia, Margaret

2016-05-01

Three focus groups were conducted with residential construction workers from local New Jersey labor organizations to characterize barriers to fall protection use among residential construction contractors who work for companies with fewer than ten employees. Thirty-six residential construction workers volunteered to participate, the average age was thirty-nine years, and twenty-four (67%) were of Hispanic origin. Twelve (33%) of the participants reported having fallen from greater than 6 ft at work and twenty (56%) of the participants had known someone who has fallen from greater than 6 ft. Sixteen (44%) had not been provided with fall protection equipment by their employer and eighteen (50%) reported their current employer had not provided workplace safety training. Factors that created barriers to use of fall protection equipment such as equipment availability, employee/employer relationships, cultural differences, and company size were identified. Results from this study confirm that falls remain a concern among residential construction workers in small companies. © The Author(s) 2015.

Construction industry accidents in Spain.

PubMed

Camino López, Miguel A; Ritzel, Dale O; Fontaneda, Ignacio; González Alcantara, Oscar J

2008-01-01

This paper analyzed industrial accidents that take place on construction sites and their severity. Eighteen variables were studied. We analyzed the influence of each of these with respect to the severity and fatality of the accident. This descriptive analysis was grounded in 1,630,452 accidents, representing the total number of accidents suffered by workers in the construction sector in Spain over the period 1990-2000. It was shown that age, type of contract, time of accident, length of service in the company, company size, day of the week, and the remainder of the variables under analysis influenced the seriousness of the accident. IMPACT ON INJURY PREVENTION: The results obtained show that different training was needed, depending on the severity of accidents, for different age, length of service in the company, organization of work, and time when workers work. The research provides an insight to the likely causes of construction injuries in Spain. As a result of the analysis, industries and governmental agencies in Spain can start to provide appropriate strategies and training to the construction workers.

Final Environmental Assessment for Constructing and Operating Remoted Target Systems at Avon Park Air Force Range, Florida

DTIC Science & Technology

2003-12-01

NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Air Combat Command,Environmental Flight,Avon Park Air Force Range...FL,33825 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10. SPONSOR/MONITOR’S ACRONYM(S) 11...Oscar Range are either Spodosols or Alfisols. Spodosols soils are characterized by a subsurface zone called a spodic ( organic ) horizon layer, whereas

The healthy organization construct: A review and research agenda.

PubMed

Raya, Rampalli Prabhakara; Panneerselvam, Sivapragasam

2013-09-01

Work plays an important role in one's life for many reasons. It provides us with economic, social, and personal satisfaction and accounts for a substantial percentage of our waking hours. But in today's knowledge-driven economy, organization of work has been changing at a warp speed as a consequence of economic, social and technological aspects of changes brought down by globalization and liberalization worldwide. While this situation has eliminated some risks of the earlier industrial era, it is introducing others. In such a dynamic business environment, where can business leaders and managers find competitive advantage? It lies in balancing people and performance goals. This is the line of approach for healthy organization research that examines organizational context with regard to: People, work organization, management practices, employee wellbeing and performance. The healthy organization concept proposes that along with the profits, employee's well being should also be an important goal for organizations. In this paper, the researcher undertakes an extensive review of literature in the mainstream business literature and establishes the agenda for healthy organization research among other research paradigms.

The healthy organization construct: A review and research agenda

PubMed Central

Raya, Rampalli Prabhakara; Panneerselvam, Sivapragasam

2013-01-01

Work plays an important role in one's life for many reasons. It provides us with economic, social, and personal satisfaction and accounts for a substantial percentage of our waking hours. But in today's knowledge-driven economy, organization of work has been changing at a warp speed as a consequence of economic, social and technological aspects of changes brought down by globalization and liberalization worldwide. While this situation has eliminated some risks of the earlier industrial era, it is introducing others. In such a dynamic business environment, where can business leaders and managers find competitive advantage? It lies in balancing people and performance goals. This is the line of approach for healthy organization research that examines organizational context with regard to: People, work organization, management practices, employee wellbeing and performance. The healthy organization concept proposes that along with the profits, employee's well being should also be an important goal for organizations. In this paper, the researcher undertakes an extensive review of literature in the mainstream business literature and establishes the agenda for healthy organization research among other research paradigms. PMID:24872666

Building up explanations in physics teaching

NASA Astrophysics Data System (ADS)

Pessoa de Carvalho, Anna Maria; Paulo, Sao

2004-02-01

The purpose of this research project was to study how students in the first years of elementary school (children from 7 to 10 years of age) are initiated into the construction of explanations of physical phenomena in the teaching of science. With this purpose in mind, we organized classes based on the proposition of investigative problems, where children, working in groups, could solve problems by raising and testing their own hypotheses. They would then attempt, by means of general discussion organized by the teacher, to discuss how each problem was solved and why it worked. We videotaped a series of classes in which the students solved 15 different investigative problems. We also analysed the teacher/student interactions that took place (in this paper, we present data on two of these classes). Based on our data we found that students construct their own causal explanations by following a sequence of stages that includes the appearance of novelties. We also discuss how our data relate to the teacher's role in the classroom and to the organization of science teaching at this level.

48 CFR 1827.304-3 - Contracts for construction work or architect-engineer services. (NASA supplements paragraph (a))

Code of Federal Regulations, 2014 CFR

2014-10-01

... architect-engineer services contracts with other than a small business or nonprofit organization, see 1827... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Patent Rights Under Government Contracts 1827.304-3 Contracts for...

48 CFR 1827.304-3 - Contracts for construction work or architect-engineer services. (NASA supplements paragraph (a))

Code of Federal Regulations, 2013 CFR

2013-10-01

... architect-engineer services contracts with other than a small business or nonprofit organization, see 1827... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Patent Rights Under Government Contracts 1827.304-3 Contracts for...

48 CFR 1827.304-3 - Contracts for construction work or architect-engineer services. (NASA supplements paragraph (a))

Code of Federal Regulations, 2011 CFR

2011-10-01

... architect-engineer services contracts with other than a small business or nonprofit organization, see 1827... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Patent Rights Under Government Contracts 1827.304-3 Contracts for...

48 CFR 1827.304-3 - Contracts for construction work or architect-engineer services. (NASA supplements paragraph (a))

Code of Federal Regulations, 2012 CFR

2012-10-01

... architect-engineer services contracts with other than a small business or nonprofit organization, see 1827... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Patent Rights Under Government Contracts 1827.304-3 Contracts for...

What Does It Take to Search Organized? The Cognitive Correlates of Search Organization During Cancellation After Stroke.

PubMed

Ten Brink, Antonia F; Visser-Meily, Johanna M A; Nijboer, Tanja C W

2018-05-01

Stroke could lead to deficits in organization of visual search. Cancellation tests are frequently used in standard neuropsychological assessment and appear suitable to measure search organization. The current aim was to evaluate which cognitive functions are associated with cancellation organization measures after stroke. Stroke patients admitted to inpatient rehabilitation were included in this retrospective study. We performed exploratory factor analyses to explore cognitive domains. A digital shape cancellation test (SC) was administered, and measures of search organization (intersections rate and best r) were computed. The following cognitive functions were measured by neuropsychological testing: neglect (SC, line bisection; LB, Catherine Bergego Scale; CBS, and Balloons Test), visuospatial perception and construction (Rey Complex Figure Test, RCFT), psychomotor speed (Trail Making Test; TMT-A), executive functioning/working memory (TMT-B), spatial planning (Tower Test), rule learning (Brixton Test), short-term auditory memory (Digit Span Forward; DSF), and verbal working memory (Digit Span Backward; DSB). In total, 439 stroke patients were included in our analyses. Four clusters were separated: "Executive functioning" (TMT-A, TMT-B, Brixton Test, and Tower Test), "Verbal memory" (DSF and DSB), "Search organization" (intersections rate and best r), and "Neglect" (CBS, RCFT copy, Balloons Test, SC, and LB). Search organization during cancellation, as measured with intersections rate and best r, seems a distinct cognitive construct compared to existing cognitive domains that are tested during neuropsychological assessment. Administering cancellation tests and analyzing measures of search organization could provide useful additional insights into the visuospatial processes of stroke patients. (JINS, 2018, 24, 424-436).

The Guardian. Volume 13, Issue 1, Spring 2011

DTIC Science & Technology

2011-01-01

PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES...Furthermore, there were no AT standards pertaining to design, material, or construction of new and existing buildings ; building standoff requirements; or...installations or forward-deployed areas; DOD-wide anti¬terrorism building standards for construction , standoff, and so forth; and regular FP exercises held at

Environmental Assessment for the Construction of the United States Air Force Technical Application Center (AFTAC) on Patrick Air Force Base, Florida

DTIC Science & Technology

2009-12-01

GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S...AND ADDRESS(ES) 45 Civil Engineer Squadron (45 CES/CEVP),1224 Jupiter Street,Patrick AFB,FL,32925 8. PERFORMING ORGANIZATION REPORT NUMBER 9...Quality Requirements Law or Rule Permit/Action(s) Requirement Agency or Organization AFI 32-7086, Chapter 4 Minimize loss and conduct recovery

The communication in industrialised building system (IBS) construction project: Virtual environment

NASA Astrophysics Data System (ADS)

Pozin, Mohd Affendi Ahmad; Nawi, Mohd Nasrun Mohd

2017-10-01

Large portion of numbers team organization in the IBS construction sector is known are being fragmented. That is contributed from a segregation of construction activity thus create team working in virtually. Virtual team are the nature when teams are working in distributed area, across culture and time. Therefore, teams can be respond to the task without relocating to the site project and settle down a problem through information and communication technology (ICT). The emergence of virtual team are carry out by advancements in communication technologies as a medium to improve project team communication in project delivery process on IBS construction. Based on literature review from previous study and data collected from interviewing, this paper aim to identified communication challenges among project team members according to current project development practices in IBS construction project. Hence, in attempt to develop effective communication through the advantages of virtual team approach for IBS construction project. In order to ensure the data is gathered comprehensively and accurately, the data was collected from project managers by using semi structured interview method. It was found that virtual team approach could be enable competitive challenges on complexity in the construction project management process.

Chaos as a psychological construct: historical roots, principal findings, and current growth directions.

PubMed

Guastello, Stephen J

2009-07-01

The landmarks in the use of chaos and related constructs in psychology were entwined with the growing use of other nonlinear dynamical constructs, especially catastrophes and self-organization. The growth in substantive applications of chaos in psychology is partially related to the development of methodologies that work within the constraints of psychological data. The psychological literature includes rigorous theory with testable propositions, lighter-weight metaphorical uses of the construct, and colloquial uses of "chaos" with no particular theoretical intent. The current state of the chaos construct and supporting empirical research in psychological theory is summarized in neuroscience, psychophysics, psychomotor skill and other learning phenomena, clinical and abnormal psychology, and group dynamics and organizational behavior. Trends indicate that human systems do not remain chaotic indefinitely; they eventually self-organize, and the concept of the complex adaptive system has become prominent. Chaotic turbulence is generally higher in healthy systems compared to unhealthy systems, although opposite appears true in mood disorders. Group dynamics research shows trends consistent with the complex adaptive system, whereas organizational behavior lags behind in empirical studies relative to the quantity of its theory. Future directions for research involving the chaos construct and other nonlinear dynamics are outlined.

Work-family conflict, emotional exhaustion and performance-based self-esteem: reciprocal relationships.

PubMed

Richter, Anne; Schraml, Karin; Leineweber, Constanze

2015-01-01

The three constructs of work-family conflict, emotional exhaustion and performance-based self-esteem are all related to tremendous negative consequences for the individual, the organization as well as for society. Even though there are studies that connect two of those constructs, the prospective relations between all three of them have not been studied yet. We explored the prospective relations between the three constructs in a large Swedish data set representative of the Swedish workforce. Gender differences in the relations were investigated. Longitudinal data with a 2-year time lag were gathered from 3,387 working men and women who responded to the 2006 and 2008 waves of the Swedish Longitudinal Occupational Survey of Health. Four different cross-lagged models were analysed. In the best fitting model, higher levels of work-family conflict at time 1 were associated with an increased level of performance-based self-esteem at time 2, but not with emotional exhaustion, after controlling for having children, gender, education and age. Also, relationships between emotional exhaustion at time 1 and work-family conflict and performance-based self-esteem at time 2 could be established. Furthermore, relationships between performance-based self-esteem time 1 and work-family conflict and emotional exhaustion time 2 were found. Multiple-group analysis did not show any differences in the relations of the tested constructs over time for either men or women. We conclude that the three constructs are interrelated and best understood through a reciprocal model. No differences were found between men and women.

Use of formwork systems in high-rise construction

NASA Astrophysics Data System (ADS)

Kurakova, Oksana

2018-03-01

Erection of high quality buildings and structures within a reasonable time frame is the crucial factor for the competitiveness of any construction organization. The main material used in high-rise construction is insitu reinforced concrete. The technology of its use is directly related to the use of formwork systems. Formwork systems and formwork technologies basically determine the speed of construction and labor intensity of concreting operations. Therefore, it is also possible to achieve the goal of reducing the construction time and labor intensity of works performed by improving the technology of formwork systems use. Currently there are unresolved issues in the area of implementation of monolithic technology projects, and problems related to the selection of a formwork technology, high labor intensity of works, poor quality of materials and structures, etc. are the main ones. The article presents organizational and technological measures, by means of which introduction it is possible to shorten the duration of construction. A comparison of operations performed during formwork installation according to the conventional technology and taking into account the implemented organizational and technological measures is presented. The results of a comparative analysis of economic efficiency assessments are also presented on the example of a specific construction project before and after the implementation of the above mentioned measures. The study showed that introduction of the proposed organizational and technological model taking into account optimization of reinforcing and concreting works significantly improves the efficiency of a high-rise construction project. And further improvement of technologies for the use of insitu reinforced concrete is a promising direction in the construction of high-rise buildings.

Leadership outside the Box: The Power of Nurturing the Human Spirit at Work in an Era of Globalization

ERIC Educational Resources Information Center

Rutigliano, Nancy Kymn Harvin; Frye, Alexandria S.

2015-01-01

The human spirit is an untapped resource that can fuel organizations in this era of globalization. While workplace spirituality is often seen as an abstract philosophical construct that may be defined differently by each individual who studies it, fulfillment at work, shared values and sense of meaning along with a sense of belonging or…

Occupational accidents in the Netherlands: incidence, mental harm, and their relationship with psychosocial factors at work.

PubMed

van der Klauw, Marloes; Hengel, Karen Oude; Roozeboom, Maartje Bakhuys; Koppes, Lando L; Venema, Anita

2016-01-01

This study investigated the incidence of mental harm due to occupational accidents and the relation between psychosocial factors at work and the occurrence of occupational accidents in the Netherlands for the construction industry and health and welfare sector. Analyses revealed that occupational accidents in the construction industry more often involved physical harm, whereas accidents in the health and welfare sector relatively more often resulted in mental harm, in comparison to other sectors. Results showed that psychosocial factors were associated with occupational accidents in both sectors. For the construction industry, high time pressure and exposure to violence and harassment by colleagues or supervisors were associated with occupational accidents. For the health and welfare sector, low autonomy and exposure to violence and harassment by colleagues or supervisors or by people outside the organization were associated with occupational accidents. The present paper stresses the importance of also taking psychological consequences and psychosocial factors at work into account in assessing the occurrence of occupational accidents.

Innovative Organization of Project Activity of Construction Students

NASA Astrophysics Data System (ADS)

Stolbova, I. D.; Aleksandrova, E. P.; Krainova, M. N.

2017-11-01

The construction industry competitiveness depends on its equipping with information modeling technologies. This requires training and development of human resources. The advantages of BIM-technologies are considered. The requirements for the specialists capable of promoting information modeling technologies in the construction industry are discussed. For a wide application of BIM-technologies, the problem of training personnel with a new thinking must be solved. When preparing graduates of the major “Construction”, it is necessary to introduce innovative educational technologies aimed at building the students’ ability for team work, competences in the field of modern information and communication technologies, as well as design skills basing on spatial modeling. Graphic training is the first discipline of the professional orientation for construction students. In the context of training it is important to create such learning environment that is close to a professional one. The paper provides the examples of practice-oriented assignments based on the project method in the course of students’ independent work.

Data Policy Construction Set - Building Blocks from Childhood Constructions

NASA Astrophysics Data System (ADS)

Fleischer, Dirk; Paul-Stueve, Thilo; Jobmann, Alexandra; Farrenkopf, Stefan

2016-04-01

A complete construction set of building blocks usually comes with instructions and these instruction include building stages. The products of these building stages usually build from very general parts become highly specialized building parts for very unique features of the whole construction model. This sounds very much like the construction or organization of an interdisciplinary research project, institution or association, doesn't it! The creation process of an overarching data policy for a project group or institution is exactly the combination of individual interests with the common goal of a collaborative data policy and can be compared with the building stages of a construction set of building blocks and the building instructions. Keeping this in mind we created the data policy construction set of textual building blocks. This construction set is subdivided into several building stages or parts each containing multiple building blocks as text blocks. By combining building blocks of all subdivisions it is supposed to create a cascading data policy document. Cascading from the top level as a construction set provider for all further down existing levels such as project, themes, work packages or Universities, faculties, institutes down to the working level of working groups. The working groups are picking from the remaining building blocks in the provided construction set the suitable blocks for its working procedures to create a very specific policy from the available construction set provided by the top level community. Nevertheless, if a working group realized that there are missing building blocks or worse that there are missing building parts, then they have the chance to add the missing pieces to the construction set of direct an future use. This cascading approach enables project or institution wide application of the encoded rules from the textual level on access to data storage infrastructure. This structured approach is flexible enough to allow for the fact that interdisciplinary research projects always bring together very diverse amount of working habits, methods and requirements. All these need to be considered for the creation of the general document on data sharing and research data management. This approach focused on the recommendation of the RDA practical policy working group to implement practical policies derived from the textual level. Therefore it aims to move the data policy creation procedure and implementation towards the consortium or institutional formation with all the benefits of an existing data policy construction set already during the proposal creation and proposal review. Picking up the metaphor of real building blocks in context of data policies provides also the insight that existing building blocks and building parts can be reused as they are, but also can be redesigned with very little changes or a full overhaul.

Working Papers in Art Education, 1981.

ERIC Educational Resources Information Center

Zurmuehlen, Marilyn, Ed.

1981-01-01

Papers by graduate students, and occasionally papers from their mentors which establish a context for the student papers, are organized into four sections. Section 1, "Observation," includes two papers, "Observation Children at a Puppet Theater Performance" (Grace Johnson), and "Manipulations: Clay Construction" (Kim Spradling). Section 2,…

Self-efficacy as a unifying construct in nursing-social work collaboration with vulnerable populations.

PubMed

Washington, Olivia G M; Moxley, David P

2013-03-01

The authors consider self-efficacy practice as an organizing construct guiding nursing-social work action research in partnership with older homeless and formerly homeless African-American women. The authors, both academics who together have worked with members of this vulnerable population for a decade and a half, report on their unifying action research perspective immersed in self-efficacy theory. We examine how our adaptations of Bandura's classic four sources of self-efficacy form a distinctive intervention practice designed to help older African-American women emerge from homelessness. We amplify the incorporation of the four sources (vicarious experience and exposure to powerful role models, emotional arousal and accompanying catharsis, verbal persuasion, and role performance) into a grand strategy useful in working collaboratively with members of vulnerable populations, so they can achieve outcomes that improve their functional health, well-being and ultimately their quality of life. © 2012 Blackwell Publishing Ltd.

Communities’ Strategic Opportunities Through Broken Window Repair and Global Commons Improvements

DTIC Science & Technology

2014-06-01

5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Program Executive Office (Integrated...Warfare Systems),16107 Benedict Court,Woodbridge,VA,22191-4302 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING AGENCY NAME(S) AND...identified six priorities, areas of focus: continue to focus on institutional reform; re-evaluate our military’s force planning construct ; preparing for a

Defense Small Business Innovation Research Program (SBIR). Program Solicitation Number 89.1. FY-1989

DTIC Science & Technology

1989-01-06

scale testing, such as plasma-arc and oxyacetylene torch test are performed. However, correlations to relate ablation rate from these test data to...helicopter rotor. In phase II, the contractor should construct and demonstrate a working model. 36 A89-010 TITLE: Smooth, Erosion Resistant Coatings ...for Organic Matrix Composites OBJECTIVE: Erosion Resistant Coatings for Organic Matrix Composites for use in Compressor Section of Future Gas Turbine

WORKPLACE SOCIAL SUPPORT AND WORK-FAMILY CONFLICT: A META-ANALYSIS CLARIFYING THE INFLUENCE OF GENERAL AND WORK-FAMILY-SPECIFIC SUPERVISOR AND ORGANIZATIONAL SUPPORT.

PubMed

Kossek, Ellen Ernst; Pichler, Shaun; Bodner, Todd; Hammer, Leslie B

2011-01-01

This article uses meta-analysis to develop a model integrating research on relationships between employee perceptions of general and work-family-specific supervisor and organizational support and work-family conflict. Drawing on 115 samples from 85 studies comprising 72,507 employees, we compared the relative influence of 4 types of workplace social support to work-family conflict: perceived organizational support (POS); supervisor support; perceived organizational work-family support, also known as family-supportive organizational perceptions (FSOP); and supervisor work-family support. Results show work-family-specific constructs of supervisor support and organization support are more strongly related to work-family conflict than general supervisor support and organization support, respectively. We then test a mediation model assessing the effects of all measures at once and show positive perceptions of general and work-family-specific supervisor indirectly relate to work-family conflict via organizational work-family support. These results demonstrate that work-family-specific support plays a central role in individuals' work-family conflict experiences.

Navy Medicine. Volume 102, No. 4, Fall 2010

DTIC Science & Technology

2010-01-01

5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS...dental assistance to more than 4,000 Panama- nian citizens, immunized more than 800 animals and continued work on construction projects in local...patients, performed 859 surger- ies, issued 60,883 glasses, completed 22 engineering projects , participated in 86 community service projects (COM

["Risk factors for childhood depression"--research design, implementation, proceedings: history of 13 years: experience in grant preparation, writing, organization in connection with an American NIMH Grant].

PubMed

Vetró, Agnes; Baji, Ildikó; Benák, István; Besnyo, Márta; Csorba, János; Daróczy, Gabriella; Dombóvári, Edit; Kiss, Eniko; Gádoros, Jmúlia; Kaczvinszky, Emília; Kapornai, Krisztina; Mayer, László; Rimay, Tímea; Skultéty, Dóra; Szabó, Krisztina; Tamás, Zsuzsanna; Székely, Judit; Kovács, Mária

2009-01-01

The authors summarize their experiences in research organization accumulated during 13 years. At first they outline preliminary studies which are prerequisites of high prestige international grants. Then they describe the huge administrative apparatus dedicated - besides skilled professionals - for the construction and organization of the research, the management, continuous checking and evaluation of data in such a multisite study. Finally, they report on the scientific results obtained after 13 years of hard work.

The Effects of Work-Related Values on Communication Between R and D Groups. Part 2

NASA Technical Reports Server (NTRS)

Douds, Charles Fowler

1970-01-01

The methods are presented by which the scales and indicators are combined to provide measures of the variables used in the similarity propositions. These variables are constructs employed to describe the relationships among various phenomena occurring in R and D organizations. The character of these constructs as revealed by the characteristics of the measures derived from response patterns is presented. The reliability and validity of the measures are considered, and test procedures are discussed.

America’s Post-9/11 Grand Strategy: Matching the Response to the Threat, and Implications for U.S. National Power

DTIC Science & Technology

2012-05-17

CONTRACT NUMBER Sb. GRANT NUMBER Sc. PROGRAM ELEMENT NUMBER Sd. PROJECT NUMBER Se. TASK NUMBER Sf. WORK UNIT NUMBER 8. PERFORMING ORGANIZATION...construction projects in Afghanistan. In 1984, while continuing his construction support, he turned his focus to funding Afghan training camps, and more...of terrorism, pursuit of weapons of mass destruction, and the notion of using action against Iraq as an example to other regimes. President Bush

Twenty natural organic pigments for application in dye sensitized solar cells

NASA Astrophysics Data System (ADS)

Castillo, D.; Sánchez Juárez, A.; Espinosa Tapia, S.; Guaman, A.; Obregón Calderón, D.

2016-09-01

In this work we present the results of a study of twenty natural pigments obtained from plants and insects from southern Ecuador. Many of them will be considered as a potential natural sensitizer for the construction of DSSCs. The results indicate that these pigments have a good performance in the absorbance and wavelength spectra. Were selected four best pigments for the construction of DSSCs, Rumex tolimensis Wedd, Raphanus sativus, Hibiscus sabdariffa, and Prunus serótina, however the conversion efficiency is lower than 1%.

EXTENSION METHODS IDEAS FOR RURAL CIVIL DEFENSE.

ERIC Educational Resources Information Center

Department of Agriculture, Washington, DC.

TECHNIQUES FOR INVOLVING THE RURAL POPULATION IN CIVIL DEFENSE PLANNING IS THE SUBJECT OF THIS DOCUMENT. AN INITIAL STEP INVOLVES DETERMINING THE VARIOUS COMMUNICATION SKILLS TO BE USED. METHODS OF WORKING WITH COMMUNITY ORGANIZATIONS, MASS MEDIA TECHNIQUES, AND CONSTRUCTION OF EXHIBITS ARE DESCRIBED. SMALL GROUP DISCUSSION TECHNIQUES EXPLAINED…

Engagement of nurses in their profession. Qualitative study on engagement.

PubMed

García-Sierra, Rosa; Fernández-Castro, Jordi; Martínez-Zaragoza, Fermín

To identify common issues of nurses with high engagement to enable us to develop the construct as it applies to nursing in more depth. Based on the constructivist paradigm and with a phenomenological approach, a qualitative content analysis was conducted using an inductive approach. Participants were nurses working in direct care in different healthcare areas. The sample size was determined by data saturation and 15 participants were interviewed. The units of meaning were grouped into 11 subcategories, and then into 7 categories termed vigour, dedication, reward, autonomy, social support, conciliation and attributes of nurses. Then these categories were grouped into 3 major themes: job characteristics, characteristics of organizations, and individual characteristics. Having high engagement does not mean ignoring the negative aspects of work and organizations. Nurses who maintain high engagement are also affected by the negative aspects, however the assessment of positive aspects such as enjoying the work, the meaning of being a nurse, reward and autonomy enable the process of depletion of engagement to be overcome. In view of the findings, we propose reconceptualising the construct, taking the features of nursing into account. Copyright © 2017 Elsevier España, S.L.U. All rights reserved.

Validating a work group climate assessment tool for improving the performance of public health organizations

PubMed Central

Perry, Cary; LeMay, Nancy; Rodway, Greg; Tracy, Allison; Galer, Joan

2005-01-01

Background This article describes the validation of an instrument to measure work group climate in public health organizations in developing countries. The instrument, the Work Group Climate Assessment Tool (WCA), was applied in Brazil, Mozambique, and Guinea to assess the intermediate outcomes of a program to develop leadership for performance improvement. Data were collected from 305 individuals in 42 work groups, who completed a self-administered questionnaire. Methods The WCA was initially validated using Cronbach's alpha reliability coefficient and exploratory factor analysis. This article presents the results of a second validation study to refine the initial analyses to account for nested data, to provide item-level psychometrics, and to establish construct validity. Analyses included eigenvalue decomposition analysis, confirmatory factor analysis, and validity and reliability analyses. Results This study confirmed the validity and reliability of the WCA across work groups with different demographic characteristics (gender, education, management level, and geographical location). The study showed that there is agreement between the theoretical construct of work climate and the items in the WCA tool across different populations. The WCA captures a single perception of climate rather than individual sub-scales of clarity, support, and challenge. Conclusion The WCA is useful for comparing the climates of different work groups, tracking the changes in climate in a single work group over time, or examining differences among individuals' perceptions of their work group climate. Application of the WCA before and after a leadership development process can help work groups hold a discussion about current climate and select a target for improvement. The WCA provides work groups with a tool to take ownership of their own group climate through a process that is simple and objective and that protects individual confidentiality. PMID:16223447

Organization specific predictors of job satisfaction: findings from a Canadian multi-site quality of work life cross-sectional survey.

PubMed

Krueger, Paul; Brazil, Kevin; Lohfeld, Lynne; Edward, H Gayle; Lewis, David; Tjam, Erin

2002-03-25

Organizational features can affect how staff view their quality of work life. Determining staff perceptions about quality of work life is an important consideration for employers interested in improving employee job satisfaction. The purpose of this study was to identify organization specific predictors of job satisfaction within a health care system that consisted of six independent health care organizations. 5,486 full, part and causal time (non-physician) staff on active payroll within six organizations (2 community hospitals, 1 community hospital/long-term care facility, 1 long-term care facility, 1 tertiary care/community health centre, and 1 visiting nursing agency) located in five communities in Central West Ontario, Canada were asked to complete a 65-item quality of work life survey. The self-administered questionnaires collected staff perceptions of: co-worker and supervisor support; teamwork and communication; job demands and decision authority; organization characteristics; patient/resident care; compensation and benefits; staff training and development; and impressions of the organization. Socio-demographic data were also collected. Depending on the organization, between 15 and 30 (of the 40 potential predictor) variables were found to be statistically associated with job satisfaction (univariate analyses). Logistic regression analyses identified the best predictors of job satisfaction and these are presented for each of the six organizations and for all organizations combined. The findings indicate that job satisfaction is a multidimensional construct and although there appear to be some commonalities across organizations, some predictors of job satisfaction appear to be organization and context specific.

Organization specific predictors of job satisfaction: findings from a Canadian multi-site quality of work life cross-sectional survey

PubMed Central

Krueger, Paul; Brazil, Kevin; Lohfeld, Lynne; Edward, H Gayle; Lewis, David; Tjam, Erin

2002-01-01

Background Organizational features can affect how staff view their quality of work life. Determining staff perceptions about quality of work life is an important consideration for employers interested in improving employee job satisfaction. The purpose of this study was to identify organization specific predictors of job satisfaction within a health care system that consisted of six independent health care organizations. Methods 5,486 full, part and causal time (non-physician) staff on active payroll within six organizations (2 community hospitals, 1 community hospital/long-term care facility, 1 long-term care facility, 1 tertiary care/community health centre, and 1 visiting nursing agency) located in five communities in Central West Ontario, Canada were asked to complete a 65-item quality of work life survey. The self-administered questionnaires collected staff perceptions of: co-worker and supervisor support; teamwork and communication; job demands and decision authority; organization characteristics; patient/resident care; compensation and benefits; staff training and development; and impressions of the organization. Socio-demographic data were also collected. Results Depending on the organization, between 15 and 30 (of the 40 potential predictor) variables were found to be statistically associated with job satisfaction (univariate analyses). Logistic regression analyses identified the best predictors of job satisfaction and these are presented for each of the six organizations and for all organizations combined. Conclusions The findings indicate that job satisfaction is a multidimensional construct and although there appear to be some commonalities across organizations, some predictors of job satisfaction appear to be organization and context specific. PMID:11914162

Recent Progress on Systems and Synthetic Biology Approaches to Engineer Fungi As Microbial Cell Factories.

PubMed

Amores, Gerardo Ruiz; Guazzaroni, María-Eugenia; Arruda, Letícia Magalhães; Silva-Rocha, Rafael

2016-04-01

Filamentous fungi are remarkable organisms naturally specialized in deconstructing plant biomass and this feature has a tremendous potential for biofuel production from renewable sources. The past decades have been marked by a remarkable progress in the genetic engineering of fungi to generate industry-compatible strains needed for some biotech applications. In this sense, progress in this field has been marked by the utilization of high-throughput techniques to gain deep understanding of the molecular machinery controlling the physiology of these organisms, starting thus the Systems Biology era of fungi. Additionally, genetic engineering has been extensively applied to modify wellcharacterized promoters in order to construct new expression systems with enhanced performance under the conditions of interest. In this review, we discuss some aspects related to significant progress in the understating and engineering of fungi for biotechnological applications, with special focus on the construction of synthetic promoters and circuits in organisms relevant for industry. Different engineering approaches are shown, and their potential and limitations for the construction of complex synthetic circuits in these organisms are examined. Finally, we discuss the impact of engineered promoter architecture in the single-cell behavior of the system, an often-neglected relationship with a tremendous impact in the final performance of the process of interest. We expect to provide here some new directions to drive future research directed to the construction of high-performance, engineered fungal strains working as microbial cell factories.

Self-defeating behaviors in organizations: the relationship between thwarted belonging and interpersonal work behaviors.

PubMed

Thau, Stefan; Aquino, Karl; Poortvliet, P Marijn

2007-05-01

This multisource field study applied belongingness theory to examine whether thwarted belonging, defined as the perceived discrepancy between one's desired and actual levels of belonging with respect to one's coworkers, predicts interpersonal work behaviors that are self-defeating. Controlling for demographic variables, job type, justice constructs, and trust in organization in a multilevel regression analysis using data from 130 employees of a clinical chemical laboratory and their supervisors, the authors found that employees who perceive greater levels of desired coworker belonging than actual levels of coworker belonging were more likely to engage in interpersonally harmful and less likely to engage in interpersonally helpful behaviors. Implications for the application of belongingness theory to explain self-defeating behaviors in organizations are discussed. 2007 APA, all rights reserved

Evaluation of environmental management resources (ISO 14001) at civil engineering construction worksites: a case study of the community of Madrid.

PubMed

Rodríguez, Gracia; Alegre, Francisco Javier; Martínez, Germán

2011-07-01

In recent years, significant advances have been made in business organization and management. The growing demands of clients as well as the globalization of world markets are among the many factors that have led to the establishment of systems of quality control and environmental management as a competitive strategy for businesses. When compared to other professional sectors, the construction sector has been slower to respond to environmental problems and to adopt Environmental Management Systems (EMS). In the world today the ISO 14001 standard is currently the main frame of reference used by construction companies to implement this type of management system. This article presents the results of a general study regarding the evaluation of the application of the ISO 14001 standard at civil engineering construction worksites in the Community of Madrid (Spain), specifically pertaining to requirement 4.4.1, Resources, roles, responsibilities, and authority. According to requirement 4.4.1, company executives should appoint people responsible for implementing the EMS and also specify their responsibilities and functions. The personnel designated for supervising environmental work should also have sufficient authority to establish and maintain the EMS. The results obtained were the following: - EMS supervisors did not generally possess adequate training and solid experience in construction work and in the environment. Furthermore, supervisors were usually forced to combine their environmental work with other tasks, which made their job even more difficult. - Generally speaking, supervisors were not given sufficient authority and autonomy because productivity at the construction site had priority over environmental management. This was due to the fact that the company management did not have a respectful attitude toward the environment, nor was the management actively involved in the establishment of the EMS. - Insufficient resources were allocated to the Environmental Management Unit. As a result, the application of EMSs in construction projects often appeared to be more of a formality, which was merely a way of maintaining the certification of the Environmental Management System. It was more a means of meeting the requirements for submitting a tender to contracting organisms rather than an indicator of any real commitment to improving the environmental performance of construction companies. Copyright © 2011 Elsevier Ltd. All rights reserved.

Factors influencing unsafe behaviors and accidents on construction sites: a review.

PubMed

Khosravi, Yahya; Asilian-Mahabadi, Hassan; Hajizadeh, Ebrahim; Hassanzadeh-Rangi, Narmin; Bastani, Hamid; Behzadan, Amir H

2014-01-01

Construction is a hazardous occupation due to the unique nature of activities involved and the repetitiveness of several field behaviors. The aim of this methodological and theoretical review is to explore the empirical factors influencing unsafe behaviors and accidents on construction sites. In this work, results and findings from 56 related previous studies were investigated. These studies were categorized based on their design, type, methods of data collection, analytical methods, variables, and key findings. A qualitative content analysis procedure was used to extract variables, themes, and factors. In addition, all studies were reviewed to determine the quality rating and to evaluate the strength of provided evidence. The content analysis identified 8 main categories: (a) society, (b) organization, (c) project management, (d) supervision, (e) contractor, (f) site condition, (g) work group, and (h) individual characteristics. The review highlighted the importance of more distal factors, e.g., society and organization, and project management, that may contribute to reducing the likelihood of unsafe behaviors and accidents through the promotion of site condition and individual features (as proximal factors). Further research is necessary to provide a better understanding of the links between unsafe behavior theories and empirical findings, challenge theoretical assumptions, develop new applied theories, and make stronger recommendations.

Service-Learning from the Perspective of Community Organizations

ERIC Educational Resources Information Center

Petri, Alexis

2015-01-01

As a central construct in the theory of service-learning, reciprocity for community partners is not often the subject of scholarship, especially scholarship that seeks to understand the benefits and opportunity costs of service-learning. This article explores how reciprocity works in higher education service-learning from the perspective of…

General Physics as a Major

ERIC Educational Resources Information Center

Peckham, Donald C.; Romer, Alfred

1976-01-01

A three-year general physics program which uses a single text from which a sequence of one-year courses have been constructed is described. It is organized on a modified spiral approach and requires laboratory work culminating in an experimental project during the sixth semester. Discussion includes implementation and administration of the…

Demographic Analysis and Planning for the Future. No. 13.

ERIC Educational Resources Information Center

Efird, Cathy M.

The basic sources and types of demographic data available for future planning for the developmentally disabled are reviewed and a frame work for data organization is suggested. It is explained that future forecasts may be undertaken by the following principles: trend forecasting or extrapolation; scenario construction; models, games, and…

By Our Own Bootstraps: Making Document Delivery Work in Oregon.

ERIC Educational Resources Information Center

Burkholder, Sue A.

1992-01-01

Describes the development of a courier service in Oregon for document delivery between libraries to support coordinated collection development activities. Organization of the service by individual libraries without dependence on the Library Services and Construction Act is discussed, and costs and response time are considered. (two references)…

Water for the World: The Scope of the Challenge.

ERIC Educational Resources Information Center

Kalbermatten, John M.; Montanari, Francis W.

1980-01-01

Assistance from professional organizations such as the American Water Works Association is essential if the goals of the International Drinking Water and Sanitation decade are to be fulfilled. This assistance will help design and construct adequate facilities and train personnel to provide water supply and sanitation facilities in developing…

A Cross-Cultural Comparison of Managerial Practices and Their Relationship to Organizational Outcome Variables.

ERIC Educational Resources Information Center

Young, Leanne E.; And Others

The rapid growth of multinational corporations has necessitated theoretical and practical concerns for operating and managing organizations in varying cultural environments. The Navy Public Works Centers (PWCs) provide engineering, maintenance, rehabilitation construction, transportation and housing to U.S. Navy customers around the world.…

The Moderating Effect of Network Centrality on the Relationship Between Work Experience Variables and Organizational Commitment

DTIC Science & Technology

2013-03-01

for the decision to continue or discontinue membership in the organization” (J. P. Meyer & Allen, 1991). The varying definitions of commitment all...attachment to the organization. Noting these commonalities, Meyer and Allen (1991) developed a construct to measure commitment comprising of three

Directivity: The Cultural and Educational Construction of Morality and Agency. Some Questions Arising From the Legacy of Vygotsky.

ERIC Educational Resources Information Center

del Rio, Pablo; Alvarez, Amelia

1995-01-01

Reviews mainstream psychology's reductionisms and presents working concepts for a cultural-historical perspective on directivity. Discusses research on the organization of emotions for directing human behavior in Castile from an interdisciplinary approach of psychology, anthropology, and education. (MMU)

Activity Theory as a Theoretical Framework for Health Self-Quantification: A Systematic Review of Empirical Studies.

PubMed

Almalki, Manal; Gray, Kathleen; Martin-Sanchez, Fernando

2016-05-27

Self-quantification (SQ) is a way of working in which, by using tracking tools, people aim to collect, manage, and reflect on personal health data to gain a better understanding of their own body, health behavior, and interaction with the world around them. However, health SQ lacks a formal framework for describing the self-quantifiers' activities and their contextual components or constructs to pursue these health related goals. Establishing such framework is important because it is the first step to operationalize health SQ fully. This may in turn help to achieve the aims of health professionals and researchers who seek to make or study changes in the self-quantifiers' health systematically. The aim of this study was to review studies on health SQ in order to answer the following questions: What are the general features of the work and the particular activities that self-quantifiers perform to achieve their health objectives? What constructs of health SQ have been identified in the scientific literature? How have these studies described such constructs? How would it be possible to model these constructs theoretically to characterize the work of health SQ? A systematic review of peer-reviewed literature was conducted. A total of 26 empirical studies were included. The content of these studies was thematically analyzed using Activity Theory as an organizing framework. The literature provided varying descriptions of health SQ as data-driven and objective-oriented work mediated by SQ tools. From the literature, we identified two types of SQ work: work on data (ie, data management activities) and work with data (ie, health management activities). Using Activity Theory, these activities could be characterized into 6 constructs: users, tracking tools, health objectives, division of work, community or group setting, and SQ plan and rules. We could not find a reference to any single study that accounted for all these activities and constructs of health SQ activity. A Health Self-Quantification Activity Framework is presented, which shows SQ tool use in context, in relation to the goals, plans, and competence of the user. This makes it easier to analyze issues affecting SQ activity, and thereby makes it more feasible to address them. This review makes two significant contributions to research in this field: it explores health SQ work and its constructs thoroughly and it adapts Activity Theory to describe health SQ activity systematically.

On-Site Construction Productivity Improvement Through Total Quality Management

DTIC Science & Technology

1991-12-01

morale of the work force. i Kaoru Ishikawa , Guide to Ouality Control, (2d ed; New York: Asian Productivity Organization, 1982), p. 45. ’"Ibid. 34...Curve Kaoru Ishikawa , Guide to Quality Control, (2d ed; New York: Asian Productivity Organization, 1982), p. 62. 54 For any normal distribution, 99.73...KAIZEN The Key to Japan’s Comoetitive Success. New York: Random House Business Division, 1986. Ishikawa , Kaoru , Guide to Ouality Control. 2d ed; New

Environmental Assessment: Construct Munitions Maintenance Facility Building 543, Project ZQEL 05 - 0007, Youngstown Air Reserve Station

DTIC Science & Technology

2006-06-01

SPONSOR/MONITOR’S ACRONYM( S ) 11. SPONSOR/MONITOR’S REPORT NUMBER( S ) 12. DISTRIBUTION /AVAILABILITY STATEMENT Approved for public release; distribution ...NUMBER 6. AUTHOR( S ) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME( S ) AND ADDRESS(ES) Weston Solutions...Inc,711 E. Monument Avenue,Dayton,OH,45402 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING AGENCY NAME( S ) AND ADDRESS(ES) 10

Global Trends and Future Warfare (Strategic Insights. Special Issue, October 2011)

DTIC Science & Technology

2011-10-01

CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ...cyberspace are constructed .33 In the early 1970s Daniel Bell in The Coming of Post- Industrial Society predicted something like this when he wrote of...ORGANIZATION NAME(S) AND ADDRESS(ES) Naval Postgraduate School,Center on Contemporary Conflict,Monterey,CA,93943 8. PERFORMING ORGANIZATION REPORT

Environmental Assessment for the Construction of Eielson AFB Youth Center Eielson Air Force Base, Alaska

DTIC Science & Technology

2010-09-01

5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S...AND ADDRESS(ES) Bestech,1040 Lorne Street unit 3,Sudbury, Ontario P3C 4R9, 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING...athletic activities, including soccer, baseball, softball , t-ball, football, cheerleading, junior wrestling, and basketball. Instructional programs

Biologically inspired information theory: Adaptation through construction of external reality models by living systems.

PubMed

Nakajima, Toshiyuki

2015-12-01

Higher animals act in the world using their external reality models to cope with the uncertain environment. Organisms that have not developed such information-processing organs may also have external reality models built in the form of their biochemical, physiological, and behavioral structures, acquired by natural selection through successful models constructed internally. Organisms subject to illusions would fail to survive in the material universe. How can organisms, or living systems in general, determine the external reality from within? This paper starts with a phenomenological model, in which the self constitutes a reality model developed through the mental processing of phenomena. Then, the it-from-bit concept is formalized using a simple mathematical model. For this formalization, my previous work on an algorithmic process is employed to constitute symbols referring to the external reality, called the inverse causality, with additional improvements to the previous work. Finally, as an extension of this model, the cognizers system model is employed to describe the self as one of many material entities in a world, each of which acts as a subject by responding to the surrounding entities. This model is used to propose a conceptual framework of information theory that can deal with both the qualitative (semantic) and quantitative aspects of the information involved in biological processes. Copyright © 2015 Elsevier Ltd. All rights reserved.

[Influence of Nurses' Self-leadership on Individual and Team Members' Work Role Performance].

PubMed

Kim, Se Young; Kim, Eun Kyung; Kim, Byungsoo; Lee, Eunpyo

2016-06-01

The purpose of this study was to examine correlations between nurses' self-leadership and individual work role performance and correlations between self-leadership in nursing units and team members' work role performance. Participants were 202 conveniently selected general nurses from 5 general hospitals in Korea. The study was carried out on 35 nursing units. Data were collected during February 2015 with self-report questionnaires. For factors affecting individual work role performance, self-expectation, self-goal setting, constructive thought, clinical career in the present nursing unit and marital status accounted for 44.0% of proficiency, while self-expectation, self-goal setting, constructive thought, and marital status accounted for 42.3% of adaptivity. Self-expectation, self-goal setting, constructive thought, self-reward, clinical career in the present nursing unit and position accounted for 26.4% of proactivity. In terms of team members' work role performance, self-reward and self-expectation in nursing units explained 29.0% of team members' proficiency. Self-reward and self-expectation in nursing units explained 31.6% of team members' adaptivity, and self-reward in nursing units explained 16.8% of team members' proactivity. The results confirm that nurses' self-leadership affects not only individual self-leadership but also team members' work role performance. Accordingly, to improve nurses' work role performance in nursing units of nursing organizations, improvement in nursing environment based on self-leadership education is necessary and nurses' tasks rearranged so they can appreciate work-autonomy and challenges of work.

Elementary Introduction to the Green Management of the Construction in Whole Process

NASA Astrophysics Data System (ADS)

Na), Wu Y. N.(Yun; Yu), Yan H. Y.(Hong; Jun), Huang Z. J.(Zhi

Construction industries consume more energy resources than necessary. it is essential to establish a management system with all pollution problems resolved to construct green buildings. By applying the theory of whole life cycle, this paper divides the whole process of construction into four sub-phases, which will also be subdivided into more concrete working procedures. Based on this, a systematic framework is promoted for the green management of the construction, especially and creatively, considering the green aims as important as the traditional three aims-"quality aim, schedule aim and cost aim". This framework, adhering to the integration idea-"customers first, whole optimal", regards the green control and workflow as an organic whole in order to build green, sustainable and healthy architecture, and then provide a perfect guide and reference to the green management.

Defining and Measuring Safety Climate: A Review of the Construction Industry Literature.

PubMed

Schwatka, Natalie V; Hecker, Steven; Goldenhar, Linda M

2016-06-01

Safety climate measurements can be used to proactively assess an organization's effectiveness in identifying and remediating work-related hazards, thereby reducing or preventing work-related ill health and injury. This review article focuses on construction-specific articles that developed and/or measured safety climate, assessed safety climate's relationship with other safety and health performance indicators, and/or used safety climate measures to evaluate interventions targeting one or more indicators of safety climate. Fifty-six articles met our inclusion criteria, 80% of which were published after 2008. Our findings demonstrate that researchers commonly defined safety climate as perception based, but the object of those perceptions varies widely. Within the wide range of indicators used to measure safety climate, safety policies, procedures, and practices were the most common, followed by general management commitment to safety. The most frequently used indicators should and do reflect that the prevention of work-related ill health and injury depends on both organizational and employee actions. Safety climate scores were commonly compared between groups (e.g. management and workers, different trades), and often correlated with subjective measures of safety behavior rather than measures of ill health or objective safety and health outcomes. Despite the observed limitations of current research, safety climate has been promised as a useful feature of research and practice activities to prevent work-related ill health and injury. Safety climate survey data can reveal gaps between management and employee perceptions, or between espoused and enacted policies, and trigger communication and action to narrow those gaps. The validation of safety climate with safety and health performance data offers the potential for using safety climate measures as a leading indicator of performance. We discuss these findings in relation to the related concept of safety culture and offer suggestions for future research and practice including (i) deriving a common definition of safety climate, (ii) developing and testing construction-specific indicators of safety climate, and (iii) focusing on construction-specific issues such as the transient workforce, subcontracting, work organization, and induction/acculturation processes. © The Author 2016. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Custom microarray construction and analysis for determining potential biomarkers of subchronic androgen exposure in the Eastern Mosquitofish (Gambusia holbrooki)

USGS Publications Warehouse

Brockmeier, Erica K.; Yu, Fahong; Amador, David Moraga; Bargar, Timothy A.; Denslow, Nancy D.

2013-01-01

Coupling microarray data with phenotypic changes driven by androgen exposure in mosquitofish is key for developing this organism into a bioindicator for EDCs. Future studies using this array will enhance knowledge of the biology and toxicological response of this species. This work provides a foundation of molecular knowledge and tools that can be used to delve further into understanding the biology of G. holbrooki and how this organism can be used as a bioindicator organism for endocrine disrupting pollutants in the environment.

Towards Characterization, Modeling, and Uncertainty Quantification in Multi-scale Mechanics of Oragnic-rich Shales

NASA Astrophysics Data System (ADS)

Abedi, S.; Mashhadian, M.; Noshadravan, A.

2015-12-01

Increasing the efficiency and sustainability in operation of hydrocarbon recovery from organic-rich shales requires a fundamental understanding of chemomechanical properties of organic-rich shales. This understanding is manifested in form of physics-bases predictive models capable of capturing highly heterogeneous and multi-scale structure of organic-rich shale materials. In this work we present a framework of experimental characterization, micromechanical modeling, and uncertainty quantification that spans from nanoscale to macroscale. Application of experiments such as coupled grid nano-indentation and energy dispersive x-ray spectroscopy and micromechanical modeling attributing the role of organic maturity to the texture of the material, allow us to identify unique clay mechanical properties among different samples that are independent of maturity of shale formations and total organic content. The results can then be used to inform the physically-based multiscale model for organic rich shales consisting of three levels that spans from the scale of elementary building blocks (e.g. clay minerals in clay-dominated formations) of organic rich shales to the scale of the macroscopic inorganic/organic hard/soft inclusion composite. Although this approach is powerful in capturing the effective properties of organic-rich shale in an average sense, it does not account for the uncertainty in compositional and mechanical model parameters. Thus, we take this model one step forward by systematically incorporating the main sources of uncertainty in modeling multiscale behavior of organic-rich shales. In particular we account for the uncertainty in main model parameters at different scales such as porosity, elastic properties and mineralogy mass percent. To that end, we use Maximum Entropy Principle and random matrix theory to construct probabilistic descriptions of model inputs based on available information. The Monte Carlo simulation is then carried out to propagate the uncertainty and consequently construct probabilistic descriptions of properties at multiple length-scales. The combination of experimental characterization and stochastic multi-scale modeling presented in this work improves the robustness in the prediction of essential subsurface parameters in engineering scale.

Technology of surface wastewater purification, including high-rise construction areas

NASA Astrophysics Data System (ADS)

Tsyba, Anna; Skolubovich, Yury

2018-03-01

Despite on the improvements in the quality of high-rise construction areas and industrial wastewater treatment, the pollution of water bodies continues to increase. This is due to the organized and unorganized surface untreated sewage entry into the reservoirs. The qualitative analysis of some cities' surface sewage composition is carried out in the work. Based on the published literature review, the characteristic contamination present in surface wastewater was identified. The paper proposes a new technology for the treatment of surface sewage and presents the results of preliminary studies.

Reducing Physical Risk Factors in Construction Work Through a Participatory Intervention: Protocol for a Mixed-Methods Process Evaluation.

PubMed

Ajslev, Jeppe; Brandt, Mikkel; Møller, Jeppe Lykke; Skals, Sebastian; Vinstrup, Jonas; Jakobsen, Markus Due; Sundstrup, Emil; Madeleine, Pascal; Andersen, Lars Louis

2016-05-26

Previous research has shown that reducing physical workload among workers in the construction industry is complicated. In order to address this issue, we developed a process evaluation in a formative mixed-methods design, drawing on existing knowledge of the potential barriers for implementation. We present the design of a mixed-methods process evaluation of the organizational, social, and subjective practices that play roles in the intervention study, integrating technical measurements to detect excessive physical exertion measured with electromyography and accelerometers, video documentation of working tasks, and a 3-phased workshop program. The evaluation is designed in an adapted process evaluation framework, addressing recruitment, reach, fidelity, satisfaction, intervention delivery, intervention received, and context of the intervention companies. Observational studies, interviews, and questionnaires among 80 construction workers organized in 20 work gangs, as well as health and safety staff, contribute to the creation of knowledge about these phenomena. At the time of publication, the process of participant recruitment is underway. Intervention studies are challenging to conduct and evaluate in the construction industry, often because of narrow time frames and ever-changing contexts. The mixed-methods design presents opportunities for obtaining detailed knowledge of the practices intra-acting with the intervention, while offering the opportunity to customize parts of the intervention.

Environmental Assessment: Construction of Firing Range and Security Forces Squadron Headquarters Building, Projects ZQEL 10-9001 and ZQEL 98-9001

DTIC Science & Technology

2009-11-01

MONITORING AGENCY NAME( S ) AND ADDRESS(ES) 10. SPONSOR/MONITOR’S ACRONYM( S ) 11. SPONSOR/MONITOR’S REPORT NUMBER( S ) 12. DISTRIBUTION /AVAILABILITY...CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR( S ) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING...ORGANIZATION NAME( S ) AND ADDRESS(ES) Weston Solutions Inc,711 E. Monument Avenue,Dayton,OH,45402 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING

Duffer’s Shoal: A Strategic Dream of the Pacific Command Area of Responsibility

DTIC Science & Technology

2015-08-01

CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ...capability vacuum between the neighborhood and national level. Unregulated construction resulted in a large proportion of the multistory buildings in the...ORGANIZATION NAME(S) AND ADDRESS(ES) U.S. Army War College,Strategic Studies Institute,47 Ashburn Drive,Carlisle,PA,17013-5010 8. PERFORMING ORGANIZATION

Finding of No Significant Impact (FONSI) for Construction of a Base Civil Engineer Complex at Travis Air Force Base, California

DTIC Science & Technology

2002-01-26

than the target species and have permeable skins. Use of pesticides, such as methoprene , in mosquito abatement may have an indirect adverse effect on...antiterrorism/force protection requirements and provide operational flexibility for the various organizations that would use the complex. Decision After...NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND

Photothermal Deflection Spectroscopy of materials for energy applications

NASA Astrophysics Data System (ADS)

Johnson, Stephen; Day, James; Couch, Brandon; Heller, Brandon; Hart, Blake; Transylvania University Team

A new photothermal deflection spectroscopy (PDS) setup has been constructed at Transylvania University. This poster will focus on the photothermal behavior of nanomaterials such as quantum dots as well as organic photovoltaic materials. With respect to organic photovoltaic materials, this work aims to understand differences in photothermal behavior between the solution and solid-film phases, where changes in photothermal spectra give insight into changes in electronic structure. A general overview of the PDS capabilities at Transylvania will also be given.

Psychological Model of a Person Dedicated to His Profession

ERIC Educational Resources Information Center

Sadovaya, Victoriya V.; Korchagina, Galina I.

2016-01-01

The heterogeneity of the social structure of modern society changes the image of a "working man." Well-established images prevailing in the XX century (an economic man, a functional man, a psychological man) are replaced by a new image--"a self-organizing man." This construct describes a "smart" class. According to…

A Case Study of Employee Engagement: Distributed Leadership Constructs within Higher Education

ERIC Educational Resources Information Center

Garti, Richard

2017-01-01

Distributed leadership for learning and teaching is an approach in which collaborative working is undertaken between individuals who trust and respect each other's contribution. During the past 10 years, the idea of distributed leadership has emerged through the theory and practice within organizations. The specific problem this study addressed is…

Understanding How Teachers Guide Evidence Construction Conversations

ERIC Educational Resources Information Center

Manz, Eve; Renga, Ian Parker

2017-01-01

Many classroom units and lessons are now organized around engaging students in developing claims and evidence. An aspect of teachers' work that is understudied is how teachers manage the complexity inherent in navigating between claims and empirical data. In other words, what do teachers do when students do not see what they are "supposed…

Mathematical Practices in a Technological Workplace: The Role of Tools

ERIC Educational Resources Information Center

Triantafillou, Chrissavgi; Potari, Despina

2010-01-01

This paper investigates the role of tools in the formation of mathematical practices and the construction of mathematical meanings in the setting of a telecommunication organization through the actions undertaken by a group of technicians in their working activity. The theoretical and analytical framework is guided by the first-generation activity…

A Model for Talent Management and Career Planning

ERIC Educational Resources Information Center

Waheed, Sajjad; Zaim, A. Halim

2015-01-01

This paper discusses a talent management and career planning system designed based on the performance and qualifications of a group of interns working for an emerging social media company located in Istanbul. The proposed model is dynamic, comparative, and perceptional in constructing a talent pool for an organization. This system was developed…

Identifying and Working through Teachable Moments

ERIC Educational Resources Information Center

Liddell, Debora L.

2012-01-01

This article explores three dimensions in moral development: (1) morality as an individual construct; (2) facilitated by powerful relationships; and (3) in the context of the organization. The goal in this article is to orient the educator to the mind of the learner and suggest strategies and approaches that facilitate learning. (Contains 1…

A working memory account of the interaction between numbers and spatial attention.

PubMed

van Dijck, Jean-Philippe; Abrahamse, Elger L; Acar, Freya; Ketels, Boris; Fias, Wim

2014-01-01

Rather than reflecting the long-term memory construct of a mental number line, it has been proposed that the relation between numbers and space is of a more temporary nature and constructed in working memory during task execution. In three experiments we further explored the viability of this working memory account. Participants performed a speeded dot detection task with dots appearing left or right, while maintaining digits or letters in working memory. Just before presentation of the dot, these digits or letters were used as central cues. These experiments show that the "attentional SNARC-effect" (where SNARC is the spatial-numerical association of response codes) is not observed when only the lastly perceived number cue--and no serially ordered sequence of cues--is maintained in working memory (Experiment 1). It is only when multiple items (numbers in Experiment 2; letters in Experiment 3) are stored in working memory in a serially organized way that the attentional cueing effect is observed as a function of serial working memory position. These observations suggest that the "attentional SNARC-effect" is strongly working memory based. Implications for theories on the mental representation of numbers are discussed.

Analysis of the organization of nursing care provided for disabled children in special education institutions in northwest Poland.

PubMed

Gawłowska-Lichota, Katarzyna; Wróbel, Agnieszka; Brodowski, Jacek; Karakiewicz, Beata

2009-06-01

It often happens that handicapped children and teenagers need to be taught in special educational centres. One of the specialists working in a special school should be a nurse having appropriate professional and methodical skills. The research involved nurses employed in 36 special education institutions in 2006/2007 in the area of North-West Poland. The organization of work was analysed on the basis of specially constructed questionnaires. The average working time of nurses employed in special education institutions was 16 hours and 12 minutes per week. In the group of nurses examined, 69% persons have completed qualifications and 5% specialty courses. Nurses cooperate mainly with speech therapists, educationalists, psychologists, rehabilitators, specialists in surdo-pedagogy and oligophreno-pedagogy. However, they attended meetings with parents very occasionally (8%) and rarely participated in staff meetings (8%). Besides, 29% of participants met with parents exclusively in case of emergency. Nurses' working time in special education institutions according to the norms or work organization. Not all nurses working with disabled pupils have the required qualifications such as the completed specialty or qualification courses. Nurses working in special education do not fully use the possibility of cooperation with the families of disabled pupils and specialists in the therapeutic team.

The impact of a peer-led participatory health and safety training program for Latino day laborers in construction.

PubMed

Williams, Quintin; Ochsner, Michele; Marshall, Elizabeth; Kimmel, Louis; Martino, Carmen

2010-06-01

Immigrant Latino day laborers working in residential construction are at particularly high risk of fatal and non-fatal traumatic injury and benefit from targeted training. To understand the impact of a participatory, peer-facilitated health and safety awareness training customized to the needs of Latino day laborers. Baseline surveys exploring exposures, PPE use, attitudes, work practices and work-related injuries were collected from more than 300 New Jersey Latino day laborers in construction prior to their participation in a one day (minimum of six hour) Spanish language health and safety training class. The classes, led by trained worker trainers, engaged participants in a series of tasks requiring teamwork and active problem solving focused on applying safe practices to situations they encounter at their worksites. Follow-up surveys were difficult to obtain among mobile day laborers, and were collected from 70 men (22% response rate) 2-6 months following training. Chi-square analysis was used to compare pre- and post-intervention PPE use, self protective actions, and self-reported injury rates. Focus groups and in-depth interviews addressing similar issues provided a context for discussing the survey findings. At baseline, the majority of day laborers who participated in this study reported great concern about the hazards of their work and were receptive to learning about health and safety despite limited influence over employers. Changes from baseline to follow-up revealed statistically significant differences in the use of certain types of PPE (hard hats, work boots with steel toes, safety harnesses, and visible safety vests), and in the frequency of self-protective work practices (e.g., trying to find out more about job hazards on your own). There was also a suggestive decrease in self-reported injuries (receiving an injury at work serious enough that you had to stop working for the rest of the day) post-training based on small numbers. Sixty-six percent of workers surveyed post-training reported sharing information from their safety workbook with friends and co-workers. Focus groups and interview results generally confirmed the quantitative findings. Participatory, peer led training tailored to the needs of construction day laborers may have a positive effect on Latino immigrant workers' attitudes, work practices, and self reported injury rates, but major changes would require employer engagement. Health and safety researchers have identified reducing the number of traumatic injuries among the immigrant construction workforce as an increasingly important priority. This project provides one model for collaboration between university-based researchers, a union, and a community-based organization. The specific elements of this project-participatory curriculum customized to the needs of day laborers in residential construction, training day laborers to facilitate training classes, and involving peer leaders in outreach and research-could be adapted by other organizations. The findings of this study suggest that the Latino day laborers have a strong interest in and some ability to act on health and safety information. Widespread implementation of this type of training, especially if supported with cooperation from residential contractors, could lead to reduced rates of traumatic injury in the residential construction industry. (c) 2010 National Safety Council. Published by Elsevier Ltd. All rights reserved.

Automated liver segmentation using a normalized probabilistic atlas

NASA Astrophysics Data System (ADS)

Linguraru, Marius George; Li, Zhixi; Shah, Furhawn; Chin, See; Summers, Ronald M.

2009-02-01

Probabilistic atlases of anatomical organs, especially the brain and the heart, have become popular in medical image analysis. We propose the construction of probabilistic atlases which retain structural variability by using a size-preserving modified affine registration. The organ positions are modeled in the physical space by normalizing the physical organ locations to an anatomical landmark. In this paper, a liver probabilistic atlas is constructed and exploited to automatically segment liver volumes from abdominal CT data. The atlas is aligned with the patient data through a succession of affine and non-linear registrations. The overlap and correlation with manual segmentations are 0.91 (0.93 DICE coefficient) and 0.99 respectively. Little work has taken place on the integration of volumetric measures of liver abnormality to clinical evaluations, which rely on linear estimates of liver height. Our application measures the liver height at the mid-hepatic line (0.94 correlation with manual measurements) and indicates that its combination with volumetric estimates could assist the development of a noninvasive tool to assess hepatomegaly.

Bioprinting of a mechanically enhanced three-dimensional dual cell-laden construct for osteochondral tissue engineering using a multi-head tissue/organ building system

NASA Astrophysics Data System (ADS)

Shim, Jin-Hyung; Lee, Jung-Seob; Kim, Jong Young; Cho, Dong-Woo

2012-08-01

The aim of this study was to build a mechanically enhanced three-dimensional (3D) bioprinted construct containing two different cell types for osteochondral tissue regeneration. Recently, the production of 3D cell-laden structures using various scaffold-free cell printing technologies has opened up new possibilities. However, ideal 3D complex tissues or organs have not yet been printed because gel-state hydrogels have been used as the principal material and are unable to maintain the desired 3D structure due to their poor mechanical strength. In this study, thermoplastic biomaterial polycaprolactone (PCL), which shows relatively high mechanical properties as compared with hydrogel, was used as a framework for enhancing the mechanical stability of the bioprinted construct. Two different alginate solutions were then infused into the previously prepared framework consisting of PCL to create the 3D construct for osteochondral printing. For this work, a multi-head tissue/organ building system (MtoBS), which was particularly designed to dispense thermoplastic biomaterial and hydrogel having completely different rheology properties, was newly developed and used to bioprint osteochondral tissue. It was confirmed that the line width, position and volume control of PCL and alginate solutions were adjustable in the MtoBS. Most importantly, dual cell-laden 3D constructs consisting of osteoblasts and chondrocytes were successfully fabricated. Further, the separately dispensed osteoblasts and chondrocytes not only retained their initial position and viability, but also proliferated up to 7 days after being dispensed.

Encoding strategies in self-initiated visual working memory.

PubMed

Magen, Hagit; Berger-Mandelbaum, Anat

2018-06-11

During a typical day, visual working memory (VWM) is recruited to temporarily maintain visual information. Although individuals often memorize external visual information provided to them, on many other occasions they memorize information they have constructed themselves. The latter aspect of memory, which we term self-initiated WM, is prevalent in everyday behavior but has largely been overlooked in the research literature. In the present study we employed a modified change detection task in which participants constructed the displays they memorized, by selecting three or four abstract shapes or real-world objects and placing them at three or four locations in a circular display of eight locations. Half of the trials included identical targets that participants could select. The results demonstrated consistent strategies across participants. To enhance memory performance, participants reported selecting abstract shapes they could verbalize, but they preferred real-world objects with distinct visual features. Furthermore, participants constructed structured memory displays, most frequently based on the Gestalt organization cue of symmetry, and to a lesser extent on cues of proximity and similarity. When identical items were selected, participants mostly placed them in close proximity, demonstrating the construction of configurations based on the interaction between several Gestalt cues. The present results are consistent with recent findings in VWM, showing that memory for visual displays based on Gestalt organization cues can benefit VWM, suggesting that individuals have access to metacognitive knowledge on the benefit of structure in VWM. More generally, this study demonstrates how individuals interact with the world by actively structuring their surroundings to enhance performance.

Safety Climate Among Nontraditional Workers in Construction: Arguing for a Focus on Construed External Safety Image.

PubMed

Stiehl, Emily; Forst, Linda

2018-05-01

Safety climate, employees' perceptions of work-related safety, 1 has been promoted as a leading indicator of workplace safety in construction. 2 , 3 While research has primarily examined internal organizational sources (e.g., manager attitudes, formal organizational policies) on these perceptions, external sources of information might be more relevant to construction workers in nontraditional jobs who work for a limited time and/or have limited interaction with other employees. This paper argues for the future development of a construed external safety image scale to measure employees' perceptions about how external groups view their organization's safety. 4 The construed external safety image would capture the external sources that nontraditional workers use to assess safety climate and will allow public health researchers to identify and change dangerous workplaces while more effectively communicating information about safe workplaces to workers. The public health relevance of safety climate and construed external safety image for monitoring and communicating safety to nontraditional workers require examination.

Organic compounds in concrete from demolition works.

PubMed

Van Praagh, M; Modin, H; Trygg, J

2015-11-01

This study aims to verify the effect of physically removing the outer surface of contaminated concrete on total contents and on potential mobility of pollutants by means of leaching tests. Reclaimed concrete from 3 industrial sites in Sweden were included: A tar impregnated military storage, a military tar track-depot, as well as concrete constructions used for disposing of pesticide production surplus and residues. Solid materials and leachates from batch and column leaching tests were analysed for metals, Cl, F, SO4, DOC and contents of suspected organic compounds (polycyclic aromatic hydrocarbons, PAH, and pesticides/substances for pesticide production such as phenoxy acids, chlorophenols and chlorocresols, respectively). In case of PAH contaminated concrete, results indicate that removing 1 or 5 mm of the surface lead to total concentrations below the Swedish guidelines for recycling of aggregates and soil in groundwork constructions. 3 out of 4 concrete samples contaminated with pesticides fulfilled Swedish guidelines for contaminated soil. Results from batch and column leaching tests indicated, however, that concentrations above environmental quality standards for certain PAH and phenoxy acids, respectively, might occur at site when the crushed concrete is recycled in groundwork constructions. As leaching tests engaged in the study deviated from leaching test standards with a limited number of samples, the potential impact of the leaching tests' equipment on measured PAH and pesticide leachate concentrations has to be evaluated in future work. Copyright © 2015. Published by Elsevier Ltd.

Construction of artificial cilia from microtubules and kinesins through a well-designed bottom-up approach.

PubMed

Sasaki, Ren; Kabir, Arif Md Rashedul; Inoue, Daisuke; Anan, Shizuka; Kimura, Atsushi P; Konagaya, Akihiko; Sada, Kazuki; Kakugo, Akira

2018-04-05

Self-organized structures of biomolecular motor systems, such as cilia and flagella, play key roles in the dynamic processes of living organisms, like locomotion or the transportation of materials. Although fabrication of such self-organized structures from reconstructed biomolecular motor systems has attracted much attention in recent years, a systematic construction methodology is still lacking. In this work, through a bottom-up approach, we fabricated artificial cilia from a reconstructed biomolecular motor system, microtubule/kinesin. The artificial cilia exhibited a beating motion upon the consumption, by the kinesins, of the chemical energy obtained from the hydrolysis of adenosine triphosphate (ATP). Several design parameters, such as the length of the microtubules, the density of the kinesins along the microtubules, the depletion force among the microtubules, etc., have been identified, which permit tuning of the beating frequency of the artificial cilia. The beating frequency of the artificial cilia increases upon increasing the length of the microtubules, but declines for the much longer microtubules. A high density of the kinesins along the microtubules is favorable for the beating motion of the cilia. The depletion force induced bundling of the microtubules accelerated the beating motion of the artificial cilia and increased the beating frequency. This work helps understand the role of self-assembled structures of the biomolecular motor systems in the dynamics of living organisms and is expected to expedite the development of artificial nanomachines, in which the biomolecular motors may serve as actuators.

TH-CD-206-08: An Anthropopathic Deformable Phantom for Geometric and Dose Accumulation Accuracy Validation of Deformable Image Registration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liao, Y; Chen, H; Chen, J

2016-06-15

Purpose: To design and construct a three-dimensional (3D) anthropopathic abdominal phantom for evaluating deformable image registration (DIR) accuracy on images and dose deformation in adaptive radiation therapy (ART). Method: Organ moulds, including liver, kidney, spleen, stomach, vertebra and two metastasis tumors, are 3D printed using the contours from an ovarian cancer patient. The organ moulds are molded with deformable gels that made of different mixtures of polyvinyl chloride (PVC) and the softener dioctyl terephthalate. Gels with different densities are obtained by a polynomial fitting curve which describes the relation between the CT number and PVC-softener blending ratio. The rigid vertebrasmore » are constructed by moulding with white cement. The final abdominal phantom is assembled by arranging all the fabricated organs inside a hollow dummy according to their anatomies and sealed with deformable gel with averaged CT number of muscle and fat. Geometric and dosimetric landmarks are embedded inside the phantom for spatial accuracy and dose accumulation accuracy studies. Three DIR algorithms available in the open source DIR toolkit-DIRART, including the Demons, the Horn-Schunck and Lucas-Kanade method and the Level-Set Motion method, are tested using the constructed phantom. Results: Viscoelastic behavior is observed in the constructed deformable gel, which serves as an ideal material for the deformable phantom. The constructed abdominal phantom consists of highly realistic anatomy and the fabricated organs inside have close CT number to its reference patient. DIR accuracy studies conducted on the constructed phantom using three DIR approaches indicate that geometric accuracy of a DIR algorithm has achieved does not guarantee accuracy in dose accumulation. Conclusions: We have designed and constructed an anthropopathic abdominal deformable phantom with satisfactory elastic property, realistic organ density and anatomy. This physical phantom is recyclable and can be used for routine validations of DIR geometric accuracy and dose accumulation accuracy in ART. This work is supported in part by grant from VARIAN MEDICAL SYSTEMS INC, the National Natural Science Foundation of China (no 81428019 and no 81301940), the Guangdong Natural Science Foundation (2015A030313302) and the 2015 Pearl River S&T Nova Program of Guangzhou (201506010096).« less

Examining the Challenging Hindrances facing in the Construction Projects: South India’s Perspective

NASA Astrophysics Data System (ADS)

Subramanyam, K.; Haridharan, M. K.

2017-07-01

Developing countries like India require a huge infrastructure to facilitate needs of the people. Construction industry provides several opportunities to the individuals. Construction manager work is to supervise and organize the construction activities in construction projects. Now a day construction manager facing challenges. This paper aimed to study the challenges facing by the construction manager in the perception of construction professionals. 39 variables were taken from the literature review which found to be severe impact on construction managers’ performance. Construction manager, project manager and site engineers are the respondents for this survey. Using SPSS, regression analysis was done and recognized significant challenges. These challenges were classified into 5 domains. In management challenges, resource availability and allocation, risks and uncertainties existing in the project onsite, top management support and cost constraints are the most significant variables. In skills requirement of a construction manager challenges, technical skills required to learn and adapt new technology in the project, decision making and planning according to the situation in site are the most significant variables. In performance challenges, implementation of tasks according to the plan is the important variable whereas in onsite challenges, manage project risks, develop project policies and procedures are the most important.

Activity Theory as a Theoretical Framework for Health Self-Quantification: A Systematic Review of Empirical Studies

PubMed Central

2016-01-01

Background Self-quantification (SQ) is a way of working in which, by using tracking tools, people aim to collect, manage, and reflect on personal health data to gain a better understanding of their own body, health behavior, and interaction with the world around them. However, health SQ lacks a formal framework for describing the self-quantifiers’ activities and their contextual components or constructs to pursue these health related goals. Establishing such framework is important because it is the first step to operationalize health SQ fully. This may in turn help to achieve the aims of health professionals and researchers who seek to make or study changes in the self-quantifiers’ health systematically. Objective The aim of this study was to review studies on health SQ in order to answer the following questions: What are the general features of the work and the particular activities that self-quantifiers perform to achieve their health objectives? What constructs of health SQ have been identified in the scientific literature? How have these studies described such constructs? How would it be possible to model these constructs theoretically to characterize the work of health SQ? Methods A systematic review of peer-reviewed literature was conducted. A total of 26 empirical studies were included. The content of these studies was thematically analyzed using Activity Theory as an organizing framework. Results The literature provided varying descriptions of health SQ as data-driven and objective-oriented work mediated by SQ tools. From the literature, we identified two types of SQ work: work on data (ie, data management activities) and work with data (ie, health management activities). Using Activity Theory, these activities could be characterized into 6 constructs: users, tracking tools, health objectives, division of work, community or group setting, and SQ plan and rules. We could not find a reference to any single study that accounted for all these activities and constructs of health SQ activity. Conclusions A Health Self-Quantification Activity Framework is presented, which shows SQ tool use in context, in relation to the goals, plans, and competence of the user. This makes it easier to analyze issues affecting SQ activity, and thereby makes it more feasible to address them. This review makes two significant contributions to research in this field: it explores health SQ work and its constructs thoroughly and it adapts Activity Theory to describe health SQ activity systematically. PMID:27234343

Final Environmental Impact Statement Permit Application by United States Steel Corp. Proposed Lake Front Steel Mill, Conneaut, Ohio. Volume 1,

DTIC Science & Technology

1979-04-01

FRONT STEEL MILL CONNEAUT, OHIO 6. PERFORMING ORG. REPORT NUMBER 7. AUTHOR(a) S. CONTRACT OR GRANT NUMBERS) Paul G. Leuchner and Gregory P. Keppel... PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT. PROJECT, TASK AREA & WORK UNIT NUMBERS U.S. Army Engineer District, Buffalo 1776 Niagara...the Army permit to perform certain work in Lake Erie and its tributaries. Activities proposed by the applicant include the construction of a water

Artificial organisms as tools for the development of psychological theory: Tolman's lesson.

PubMed

Miglino, Orazio; Gigliotta, Onofrio; Cardaci, Maurizio; Ponticorvo, Michela

2007-12-01

In the 1930s and 1940s, Edward Tolman developed a psychological theory of spatial orientation in rats and humans. He expressed his theory as an automaton (the "schematic sowbug") or what today we would call an "artificial organism." With the technology of the day, he could not implement his model. Nonetheless, he used it to develop empirical predictions which tested with animals in the laboratory. This way of proceeding was in line with scientific practice dating back to Galileo. The way psychologists use artificial organisms in their work today breaks with this tradition. Modern "artificial organisms" are constructed a posteriori, working from experimental or ethological observations. As a result, researchers can use them to confirm a theoretical model or to simulate its operation. But they make no contribution to the actual building of models. In this paper, we try to return to Tolman's original strategy: implementing his theory of "vicarious trial and error" in a simulated robot, forecasting the robot's behavior and conducting experiments that verify or falsify these predictions.

Recommendations to Minimize Timely Payment Problems of Subcontractors Involved in Private and Public Building Construction in Pennsylvania.

DTIC Science & Technology

1982-05-01

Thomas P. Kuchar 9. PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT. PROJECT, TASK Stddent,HDQA, MILPERCEN (DAPC-OPP-E) AREA 6 WORK UNIT...of Financing ................................... 50 Business Practice Information Interchange .................. 50 Program Description...51 Other Types of Credit Exchange Programs .................... 52 Chapter Summary ............................................ 53 IV REM-EDY OPTIONS

Academic English in Fifth-Grade Mathematics, Science, and Social Studies Textbooks. CSE Report 642

ERIC Educational Resources Information Center

Butler, Frances A.; Bailey, Alison L.; Stevens, Robin; Huang, Becky; Lord, Carol

2004-01-01

This study expands on previous National Center for Research on Evaluation, Standards, and Student Testing (CRESST) work that has undertaken the articulation of the academic language construct for broad educational purposes. The primary goal was to describe the language of textbook selections in terms of vocabulary, grammar, and organization of…

Experience, Reflection, Learning. Suggestions for Organisers of Schemes of Unified Vocational Preparation.

ERIC Educational Resources Information Center

Stanton, Geoff

United Vocational Preparation (UVP) is a scheme or strategy organized in England to assist young people to make successful progress during the transition from school to work. It consists of courses and assistance to young workers on an individualized basis. This guide is intended to help educators to construct and conduct schemes of UVP. The…

7 CFR Exhibit A to Subpart I of... - Self-Help Technical Assistance Grant Agreement

Code of Federal Regulations, 2014 CFR

2014-01-01

... (“Grantee”), organized and operating under (authorizing State statute) and the United States of America...” Grantee will be supervised to the extent necessary to protect the Government's interest and to help... to work together in groups by the mutual self-help method in the case of new construction. (G...

7 CFR Exhibit A to Subpart I of... - Self-Help Technical Assistance Grant Agreement

Code of Federal Regulations, 2012 CFR

2012-01-01

... (“Grantee”), organized and operating under (authorizing State statute) and the United States of America...” Grantee will be supervised to the extent necessary to protect the Government's interest and to help... to work together in groups by the mutual self-help method in the case of new construction. (G...

7 CFR Exhibit A to Subpart I of... - Self-Help Technical Assistance Grant Agreement

Code of Federal Regulations, 2013 CFR

2013-01-01

... (“Grantee”), organized and operating under (authorizing State statute) and the United States of America...” Grantee will be supervised to the extent necessary to protect the Government's interest and to help... to work together in groups by the mutual self-help method in the case of new construction. (G...

Course Outline for Lesson Plans for Pre-Employment Laboratory Training in CVAE-VEH Farm and Ranch Mechanical Repair.

ERIC Educational Resources Information Center

Texas A and M Univ., College Station. Vocational Instructional Services.

This packet contains 88 lesson plans for a laboratory course in farm and ranch mechanical repair. The lesson plans are organized into six units covering the following topics: occupational information, construction and maintenance (safety, farm carpentry, farm water supply and sanitation, farm electricity, concrete), hot metal work (oxyacetylene…

Ideas and Approaches on “Construction of High Level Simulation Experimental Teaching Center of Virtual Chemical Laboratory”

NASA Astrophysics Data System (ADS)

Zhang, Yunshen

2017-11-01

With the spiritual guidance of the Circular on the Construction of National Virtual Simulation Experimental Teaching Center by the National Department of Education, according to the requirements of construction task and work content, and based on the reality of the simulation experimental teaching center of virtual chemical laboratory at Tianjin University, this paper mainly strengthens the understanding of virtual simulation experimental teaching center from three aspects, and on this basis, this article puts forward specific construction ideas, which refer to the “four combinations, five in one, the optimization of the resources and school-enterprise cooperation”, and on this basis, this article has made effective explorations. It also shows the powerful functions of the virtual simulation experimental teaching platform in all aspects by taking the synthesis and analysis of organic compounds as an example.

Organs and organisations: Situating ethics in organ donation after circulatory death in the UK.

PubMed

Cooper, Jessie

2018-05-25

Controlled organ donation after circulatory death (DCD) has recently been revived in the UK, as part of attempts to increase organ donation rates. The re-introduction of DCD has subsequently become the focus of bioethical controversy, since it necessitates intervening in the care of dying patients to obtain quality donor organs. Transplant policy responses to these concerns have generated new legal and ethical guidelines to address uncertainties around DCD, producing claims that the UK has overcome' the ethical challenge of DCD. In contrast, by drawing on Lynch's call to 'respecify' ethics, this paper argues that ethics in DCD cannot be reduced to abstract directives for practice, but, instead, are composed and dealt with as an organisational problem. To do this, I utilise data from an ethnographic study examining the production of the 'minority ethnic organ donor' within UK organ donation settings; in particular, the data pertains to a case hospital which was in the process of developing a DCD programme during the period of fieldwork. Findings show that the ethics of DCD are encountered as practical sets of problems, constructed in relation to particular institutional locales. I describe how these issues are worked-around by creating conditions to make DCD organisationally possible, and through the animation of standard procedures into acceptable forms of practice. I argue that ethics in DCD go far beyond normative bioethical principles, to encompass concerns around: the reputation of hospital Trusts, public perceptions of organ donation, the welfare of potential donor families, and challenges to the work of health professionals caring for dying patients. The paper enriches understanding of ethics in science and medicine by showing how ethics are assembled and negotiated as a practical-organisational concern, and calls for further examination of how DCD gets constructed as a potential problem and is made to happen in practice. Crown Copyright © 2018. Published by Elsevier Ltd. All rights reserved.

Addressing dysfunctional relations among healthcare teams: improving team cooperation through applied organizational theories.

PubMed

Horwitz, Sujin K; Horwitz, Irwin B; Barshes, Neal R

2011-01-01

Previous research has demonstrated that communication failure and interpersonal conflicts are significant impediments among health-care teams to assess complex information and engage in the meaningful collaboration necessary for optimizing patient care. Despite the prolific research on the role of effective teamwork in accomplishing complex tasks, such findings have been traditionally applied to business organizations and not medical contexts. This chapter, therefore, reviews and applies four theories from the fields of organizational behavior (OB) and organization development (OD) as potential means for improving team interaction in health-care contexts. This study is unique in its approach as it addresses the long-standing problems that exist in team communication and cooperation in health-care teams by applying well-established theories from the organizational literature. The utilization and application of the theoretical constructs discussed in this work offer valuable means by which the efficacy of team work can be greatly improved in health-care organizations.

Efficient Organic/Inorganic Hybrid Solar Cell Integrating Polymer Nanowires and Inorganic Nanotetrapods.

PubMed

Xu, Weizhe; Tan, Furui; Liu, Xiansheng; Zhang, Weifeng; Qu, Shengchun; Wang, Zhijie; Wang, Zhanguo

2017-12-01

Constructing a highly efficient bulk-heterojunction is of critical importance to the hybrid organic/inorganic solar cells. Here in this work, we introduce a novel hybrid architecture containing P3HT nanowire and CdSe nanotetrapod as bicontinuous charge channels for holes and electrons, respectively. Compared to the traditionally applied P3HT molecules, the well crystallized P3HT nanowires qualify an enhanced light absorption at the long wavelength as well as strengthened charge carrier transport in the hybrid active layer. Accordingly, based on efficient dissociation of photogenerated excitons, the interpercolation of these two nano-building blocks allows a photovoltaic conversion efficiency of 1.7% in the hybrid solar cell, up to 42% enhancement compared to the reference solar cell with traditional P3HT molecules as electron donor. Our work provides a promising hybrid structure for efficient organic/inorganic bulk-heterojunction solar cells.

Planning and managing future space facility projects. [management by objectives and group dynamics

NASA Technical Reports Server (NTRS)

Sieber, J. E.; Wilhelm, J. A.; Tanner, T. A.; Helmreich, R. L.; Burgenbauch, S. F.

1979-01-01

To learn how ground-based personnel of a space project plan and organize their work and how such planning and organizing relate to work outcomes, longitudinal study of the management and execution of the Space Lab Mission Development Test 3 (SMD 3) was performed at NASA Ames Research Center. A view of the problems likely to arise in organizations and some methods of coping with these problems are presented as well as the conclusions and recommendations that pertain strictly to SMD 3 management. Emphasis is placed on the broader context of future space facility projects and additional problems that may be anticipated. A model of management that may be used to facilitate problem solving and communication - management by objectives (MBO) is presented. Some problems of communication and emotion management that MBO does not address directly are considered. Models for promoting mature, constructive and satisfying emotional relationships among group members are discussed.

Georgia Institute of Technology chilled water system evaluation and master plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-05-15

As the host of the Olympic Village for the 1996 Atlanta Olympics, Georgia Tech has experienced a surge in construction activities over the last three years. Over 1.3 million square feet of new buildings have been constructed on the Georgia Tech campus. This growth has placed a strain on the Georgia Tech community and challenged the facilities support staff charged with planning and organizing utility services. In concert with Olympic construction, utility planners have worked to ensure long term benefits for Georgia Tech facilities while meeting the short term requirements of the Olympic Games. The concentration of building construction inmore » the northwest quadrant of the campus allowed planners to construct a satellite chilled water plant to serve the needs of this area and provide the opportunity to integrate this section of the campus with the main campus chilled water system. This assessment and master plan, funded in part by the US Department of Energy, has evaluated the chilled water infrastructure at Georgia Tech, identified ongoing problems and made recommendations for long term chilled water infrastructure development and efficiency improvements. The Georgia Tech office of Facilities and RDA Engineering, Inc. have worked together to assemble relevant information and prepare the recommendations contained in this document.« less

Construction of BAC Libraries from Flow-Sorted Chromosomes.

PubMed

Šafář, Jan; Šimková, Hana; Doležel, Jaroslav

2016-01-01

Cloned DNA libraries in bacterial artificial chromosome (BAC) are the most widely used form of large-insert DNA libraries. BAC libraries are typically represented by ordered clones derived from genomic DNA of a particular organism. In the case of large eukaryotic genomes, whole-genome libraries consist of a hundred thousand to a million clones, which make their handling and screening a daunting task. The labor and cost of working with whole-genome libraries can be greatly reduced by constructing a library derived from a smaller part of the genome. Here we describe construction of BAC libraries from mitotic chromosomes purified by flow cytometric sorting. Chromosome-specific BAC libraries facilitate positional gene cloning, physical mapping, and sequencing in complex plant genomes.

Intelligent Agent Architectures: Reactive Planning Testbed

NASA Technical Reports Server (NTRS)

Rosenschein, Stanley J.; Kahn, Philip

1993-01-01

An Integrated Agent Architecture (IAA) is a framework or paradigm for constructing intelligent agents. Intelligent agents are collections of sensors, computers, and effectors that interact with their environments in real time in goal-directed ways. Because of the complexity involved in designing intelligent agents, it has been found useful to approach the construction of agents with some organizing principle, theory, or paradigm that gives shape to the agent's components and structures their relationships. Given the wide variety of approaches being taken in the field, the question naturally arises: Is there a way to compare and evaluate these approaches? The purpose of the present work is to develop common benchmark tasks and evaluation metrics to which intelligent agents, including complex robotic agents, constructed using various architectural approaches can be subjected.

Identification of Mutations in a Candidate Dengue 4 Vaccine Strain 341750 PDK20 and Construction of a Full-Length eDNA Clone of the PDK20 Vaccine Candidate

DTIC Science & Technology

2010-01-01

comply with a collection of information if it does not display a currently valid OMB control number . 1. REPORT DATE OCT 2009 2. REPORT TYPE 3. DATES...construction of a full-length eDNA clone of the PDK20 vaccine candidate 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d...PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Naval Medical Research Center,Infectious

Constructing the health care system in Greece: responsibility and powerlessness.

PubMed

Lentza, Vassiliki; Montgomery, Anthony J; Georganta, Katerina; Panagopoulou, Efharis

2014-02-01

Based on health care professionals' (HPs) and patients' interviews about work demands and quality of care in hospitals, the study explores the way that patients and HPs constructed their identities to describe and construct the health care system in Greece. This is a qualitative study using a focus group (FG) design. Seven FGs discussions were conducted: three FGs discussions were conducted for the assessment of job stressors (1 for doctors, 1 for nurses and 1 for residents) and four FGs discussions for the assessment of quality of care (1 for doctors, 1 for nurses, 1 for residents and 1 for patients). The sample consisted of health care professionals working in a teaching hospital in the region of Thessaloniki, Greece, and patients who had at least one experience of any kind in the same hospital. Transcripts of the FGs discussions underwent discourse analysis. The results showed that both HPs and patients construct the health care system based on bipolar constructions of responsibility and powerlessness. In particular, participants use these constructions to allocate the responsibility to different levels of the health care system hierarchy or to the system per se constructing, at the same time, themselves as the 'viewers' of this system. The study allowed a deeper understanding of issues related to quality of care in hospitals providing context-specific information. Identity in health care organizations was inextricably linked to power and responsibility. The need to deconstruct this responsibility/powerlessness ideology is discussed. © 2013 The British Psychological Society.

Predictors of health-related quality of life among industrial workers: A descriptive correlational study.

PubMed

Malak, Malakeh Z

2017-06-01

Assessment and evaluation of the health-related quality of life of industrial workers is an important research focus. This descriptive correlational study identifies the predictors of health-related quality of life using a random sampling of industrial workers (n = 640) from construction factories in Amman Governorate in Jordan using demographic characteristics, a health and work-related factors questionnaire, and the World Health Organization Quality of Life-Brief scale. Results showed that industrial workers had good physical health but a poor working environment. There was a statistically significant relationship between educational level, conflict between work and individual life and work and social life, working hours, and workload, and all domains of health-related quality of life. Overall, educational level was the main predictor for all domains of health-related quality of life. Such results confirm the need to develop appropriate interventions and strategies to improve workers' health-related quality of life. Furthermore, developing an integrated approach among policymakers, employers, and work organizations to enhance industrial workers' occupational health programs could be effective. © 2017 John Wiley & Sons Australia, Ltd.

Five rules for the evolution of cooperation.

PubMed

Nowak, Martin A

2006-12-08

Cooperation is needed for evolution to construct new levels of organization. Genomes, cells, multicellular organisms, social insects, and human society are all based on cooperation. Cooperation means that selfish replicators forgo some of their reproductive potential to help one another. But natural selection implies competition and therefore opposes cooperation unless a specific mechanism is at work. Here I discuss five mechanisms for the evolution of cooperation: kin selection, direct reciprocity, indirect reciprocity, network reciprocity, and group selection. For each mechanism, a simple rule is derived that specifies whether natural selection can lead to cooperation.

Five Rules for the Evolution of Cooperation

NASA Astrophysics Data System (ADS)

Nowak, Martin A.

2006-12-01

Cooperation is needed for evolution to construct new levels of organization. Genomes, cells, multicellular organisms, social insects, and human society are all based on cooperation. Cooperation means that selfish replicators forgo some of their reproductive potential to help one another. But natural selection implies competition and therefore opposes cooperation unless a specific mechanism is at work. Here I discuss five mechanisms for the evolution of cooperation: kin selection, direct reciprocity, indirect reciprocity, network reciprocity, and group selection. For each mechanism, a simple rule is derived that specifies whether natural selection can lead to cooperation.

Content-Related Interactions in Self-initiated Study Groups

NASA Astrophysics Data System (ADS)

Christian, Karen; Talanquer, Vicente

2012-09-01

The central goal of the present exploratory study was to investigate the nature of the content-related interactions in study groups independently organized by college organic chemistry students. We were particularly interested in the identification of the different factors that affected the emergence of opportunities for students to co-construct understanding and engage in higher levels of cognitive processing. Our results are based on the analysis of in situ observations of 34 self-initiated study sessions involving over a 100 students in three academic semesters. The investigation revealed three major types of social regulation processes, teaching, tutoring, and co-construction in the observed study sessions. However, the extent to which students engaged in each of them varied widely from one session to another. This variability was mostly determined by the specific composition of the study groups and the nature of the study tasks in which they were engaged. Decisions about how to organize the study session, the relative content knowledge and conceptual understanding expressed by the participants, as well as the cognitive level of the problems that guided group work had a strong impact on the nature of student interactions. Nevertheless, group talk in the observed study groups was mostly focused on low-level cognitive processes. The results of our work provide insights on how to better support students' productive engagement in study groups.

Disorganized behavior on Link's cube test is sensitive to right hemispheric frontal lobe damage in stroke patients

PubMed Central

Kopp, Bruno; Rösser, Nina; Tabeling, Sandra; Stürenburg, Hans Jörg; de Haan, Bianca; Karnath, Hans-Otto; Wessel, Karl

2014-01-01

One of Luria's favorite neuropsychological tasks for challenging frontal lobe functions was Link's cube test (LCT). The LCT is a cube construction task in which the subject must assemble 27 small cubes into one large cube in such a manner that only the painted surfaces of the small cubes are visible. We computed two new LCT composite scores, the constructive plan composite score, reflecting the capability to envisage a cubical-shaped volume, and the behavioral (dis-) organization composite score, reflecting the goal-directedness of cube construction. Voxel-based lesion-behavior mapping (VLBM) was used to test the relationship between performance on the LCT and brain injury in a sample of stroke patients with right hemisphere damage (N = 32), concentrated in the frontal lobe. We observed a relationship between the measure of behavioral (dis-) organization on the LCT and right frontal lesions. Further work in a larger sample, including left frontal lobe damage and with more power to detect effects of right posterior brain injury, is necessary to determine whether this observation is specific for right frontal lesions. PMID:24596552

Low Hysteresis Carbon Nanotube Transistors Constructed via a General Dry-Laminating Encapsulation Method on Diverse Surfaces.

PubMed

Yang, Yi; Wang, Zhongwu; Xu, Zeyang; Wu, Kunjie; Yu, Xiaoqin; Chen, Xiaosong; Meng, Yancheng; Li, Hongwei; Qiu, Song; Jin, Hehua; Li, Liqiang; Li, Qingwen

2017-04-26

Electrical hysteresis in carbon nanotube thin-film transistor (CNTTFT) due to surface adsorption of H 2 O/O 2 is a severe obstacle for practical applications. The conventional encapsulation methods based on vacuum-deposited inorganic materials or wet-coated organic materials have some limitations. In this work, we develop a general and highly efficient dry-laminating encapsulation method to reduce the hysteresis of CNTTFTs, which may simultaneously realize the construction and encapsulation of CNTTFT. Furthermore, by virtue of dry procedure and wide compatibility of PMMA, this method is suitable for the construction of CNTTFT on diverse surface including both inorganic and organic dielectric materials. Significantly, the dry-encapsulated CNTTFT exhibits very low or even negligible hysteresis with good repeatability and air stability, which is greatly superior to the nonencapsulated and wet-encapsulated CNTTFT with spin-coated PMMA. The dry-laminating encapsulation strategy, a kind of technological innovation, resolves a significant problem of CNTTFT and therefore will be promising in facile transferring and packaging the CNT films for high-performance optoelectronic devices.

Toward validation of a structural approach to conceptualizing psychopathology: A special section of the Journal of Abnormal Psychology.

PubMed

Krueger, Robert F; Tackett, Jennifer L; MacDonald, Angus

2016-11-01

Traditionally, psychopathology has been conceptualized in terms of polythetic categories derived from committee deliberations and enshrined in authoritative psychiatric nosologies-most notably the Diagnostic and Statistical Manual of Mental Disorders (DSM; American Psychiatric Association [APA], 2013). As the limitations of this form of classification have become evident, empirical data have been increasingly relied upon to investigate the structure of psychopathology. These efforts have borne fruit in terms of an increasingly consistent set of psychopathological constructs closely connected with similar personality constructs. However, the work of validating these constructs using convergent sources of data is an ongoing enterprise. This special section collects several new efforts to use structural approaches to study the validity of this empirically based organizational scheme for psychopathology. Inasmuch as a structural approach reflects the natural organization of psychopathology, it has great potential to facilitate comprehensive organization of information on the correlates of psychopathology, providing evidence for the convergent and discriminant validity of an empirical approach to classification. Here, we highlight several themes that emerge from this burgeoning literature. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Constructing a nurse appraisal form: A Delphi technique study

PubMed Central

Zaghloul, Ashraf Ahmad Zaher; AlSokair, May Kosay

2008-01-01

Objective The study was conducted with the aim to construct a unified nurse appraisal format to be used at hospitals performing under different healthcare organizations in the Eastern Province in the Kingdom of Saudi Arabia. Methodology The study included hospitals representing different healthcare organizations within the Eastern Province. The target population included Hospital head nurses and nurse supervisors and the snowball sampling technique was employed to select the panel subjects. Results The final draft resulted into the agreed upon performance dimensions which included namely; quality standards, work habits, supervision/leadership, staff relations and interpersonal skills, attendance and punctuality, problem solving, oral communication, productivity results, coordination, innovation, record keeping. Conclusion Nurse managers have to continuously assess competence of practicing nurses to assure qualified and safe patient care. A nurse appraisal form was constructed concurrently with this study results and was proposed to be used at all Eastern Region hospitals. This study is considered an initial step for further efforts and studies to be conducted to reach both national and international nursing appraisal dimensions and unify them for the sake of best health promotion. PMID:21197327

The effects of work engagement and self-efficacy on personal initiative and performance.

PubMed

Lisbona, Ana; Palaci, Francisco; Salanova, Marisa; Frese, Michael

2018-02-01

Two popular concepts, work engagement and personal initiative, are different but related constructs. This study is based on and extends the Frese and Fay (2001) model of personal initiative (PI) by including work engagement (WE) and self-efficacy as antecedents of PI, and performance as a consequence. Two studies (study 1, with a cross-sectional design using N = 396 participants from 22 organizations, and study 2, with a longitudinal design conducted in two waves with N = 118 participants from 15 organizations) test the hypotheses. Structural equation modeling and the PROCESS SPSS Macro were used to test the hypothesized mediating role of personal initiative in work engagement and performance, and the results show the indirect effect of WE on performance through PI. The results of these two studies confirmed our hypotheses: WE and self-efficacy lead to higher PI, which, in turn, leads to higher performance. In addition to considering WE as an antecedent of PI, the results lead to considering PI as an antecedent of performance.

Construct Maps: A Tool to Organize Validity Evidence

ERIC Educational Resources Information Center

McClarty, Katie Larsen

2013-01-01

The construct map is a promising tool for organizing the data standard-setting panelists interpret. The challenge in applying construct maps to standard-setting procedures will be the judicious selection of data to include within this organizing framework. Therefore, this commentary focuses on decisions about what to include in the construct map.…

Micrometer scale guidance of mesenchymal stem cells to form structurally oriented large-scale tissue engineered cartilage.

PubMed

Chou, Chih-Ling; Rivera, Alexander L; Williams, Valencia; Welter, Jean F; Mansour, Joseph M; Drazba, Judith A; Sakai, Takao; Baskaran, Harihara

2017-09-15

Current clinical methods to treat articular cartilage lesions provide temporary relief of the symptoms but fail to permanently restore the damaged tissue. Tissue engineering, using mesenchymal stem cells (MSCs) combined with scaffolds and bioactive factors, is viewed as a promising method for repairing cartilage injuries. However, current tissue engineered constructs display inferior mechanical properties compared to native articular cartilage, which could be attributed to the lack of structural organization of the extracellular matrix (ECM) of these engineered constructs in comparison to the highly oriented structure of articular cartilage ECM. We previously showed that we can guide MSCs undergoing chondrogenesis to align using microscale guidance channels on the surface of a two-dimensional (2-D) collagen scaffold, which resulted in the deposition of aligned ECM within the channels and enhanced mechanical properties of the constructs. In this study, we developed a technique to roll 2-D collagen scaffolds containing MSCs within guidance channels in order to produce a large-scale, three-dimensional (3-D) tissue engineered cartilage constructs with enhanced mechanical properties compared to current constructs. After rolling the MSC-scaffold constructs into a 3-D cylindrical structure, the constructs were cultured for 21days under chondrogenic culture conditions. The microstructure architecture and mechanical properties of the constructs were evaluated using imaging and compressive testing. Histology and immunohistochemistry of the constructs showed extensive glycosaminoglycan (GAG) and collagen type II deposition. Second harmonic generation imaging and Picrosirius red staining indicated alignment of neo-collagen fibers within the guidance channels of the constructs. Mechanical testing indicated that constructs containing the guidance channels displayed enhanced compressive properties compared to control constructs without these channels. In conclusion, using a novel roll-up method, we have developed large scale MSC based tissue-engineered cartilage that shows microscale structural organization and enhanced compressive properties compared to current tissue engineered constructs. Tissue engineered cartilage constructs made with human mesenchymal stem cells (hMSCs), scaffolds and bioactive factors are a promising solution to treat cartilage defects. A major disadvantage of these constructs is their inferior mechanical properties compared to the native tissue, which is likely due to the lack of structural organization of the extracellular matrix of the engineered constructs. In this study, we developed three-dimensional (3-D) cartilage constructs from rectangular scaffold sheets containing hMSCs in micro-guidance channels and characterized their mechanical properties and metabolic requirements. The work led to a novel roll-up method to embed 2-D microscale structures in 3-D constructs. Further, micro-guidance channels incorporated within the 3-D cartilage constructs led to the production of aligned cell-produced matrix and enhanced mechanical function. Copyright © 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Learning to Teach as Acculturation: A Case Study of Constructing a Professional Teaching Culture of Learner-Centered Pedagogy

ERIC Educational Resources Information Center

Aponte Martinez, Gerardo Joel

2017-01-01

This study explores how a group of Dominican teachers build a professional teaching culture of learner-centered pedagogies by working with a U.S.-Dominican education non-profit organization, CREAR. First, this study uncovers the CREAR cultural logics--the knowledge and know how's characteristic of teaching--that shape CREAR teaching to define…

Information Storage and Retrieval...Reports on Text Analysis, Dynamic Indexing, Feedback Searches, Dictionary Construction and File Organization.

ERIC Educational Resources Information Center

Salton, Gerald; And Others

The present report is the twenty-first in a series describing research in information storage and retrieval conducted by the Department of Computer Science at Cornell University. The report covering work carried out by the SMART project for approximately two years (summer 1970 to summer 1972) is separated into five parts: automatic content…

Knowledge at Work: Learning and Transferring Expert Reasoning through Storytelling

ERIC Educational Resources Information Center

Hernandez-Serrano, Julian; Stefanou, Spiro E.

2009-01-01

There is plenty of evidence in many fields of knowledge that storytelling is a bona fide human activity for problem-solving. We believe that a storytelling model for problem-solving can be constructed to organize this discourse. To that end, we carried out a qualitative study using the Grounded Theory tradition to build such a model always mindful…

Smart Schools, Smart Growth: Investing in Education Facilities and Stronger Communities. California Builds Better Schools. Working Paper 09-1

ERIC Educational Resources Information Center

Fuller, Bruce; Vincent, Jeff; Bierbaum, Ariel H.; Kirschenbaum, Greta; McCoy, Deborah; Rigby, Jessica

2009-01-01

This report examines how California's massive and ongoing investment in school construction could better advance the shared goals of school improvement, sustainable urban growth, and equal opportunity. This brief is organized in five parts. First, the authors sketch a "framework" for how smart growth principles could help guide school…

Retaining Army Engineer Officers

DTIC Science & Technology

2010-04-01

withdrawal behavior: organization-wide factors (e.g. pay and promotion), immediate work environment factors (e.g. supervisory style), job -content... embeddedness construct. It is a departure from the traditional model focus on employee attitudes and alternatives. Job embeddedness is a web of influence...more embedded than one who perceives less links. Job embeddedness is highly individualized and classified as links, fit, and sacrifice. Links are formal

Order, Organization, and Beauty in the Classroom: A Prerequisite, Not an Option

ERIC Educational Resources Information Center

Haskins, Cathleen

2012-01-01

Montessori education, at its best, is a combination of art and science, an exquisite balance of subjectivity and objectivity. When done well, a Montessori environment resembles a carefully crafted piece of art, a skillfully constructed laboratory for the study of life. The work of creating such a masterpiece is a labor of love and a commitment of…

[Validity and reliability of the Culture of Quality Health Services questionnaire in Mexico].

PubMed

Herrera-Kiengelher, L; Zepeda-Zaragoza, J; Austria-Corrales, F; Vázquez-Zarate, V M

2013-01-01

Patient Safety is a major public health problem worldwide and is responsibility of all those involved in health care. Establishing a Safety Culture has proved to be a factor that favors the integration of work teams, communication and construction of clear procedures in various organizations. Promote a culture of safety depends on several factors, such as organization, work unit and staff. Objective assessment of these factors will help to identify areas for improvement and establish strategic lines of action. [corrected] To adapt, validate and calibrate the questionnaire Culture of Quality in Health Services (CQHS) in Mexican population. A cross with a stratified representative sample of 522 health workers. The questionnaire was translated and adapted from Singer's. Content was validated by experts, internal consistency, confirmatory factorial validity and item calibration with Samejima's Graded Response Model. Convergent and divergent construct validity was confirmed from the CQHS, item calibration showed that the questionnaire is able to discriminate between patients and represent different levels of the hypothesized dimensions with greater accuracy and lower standard error. The CQHS is a valid and reliable instrument to assess patient safety culture in hospitals in Mexico. Copyright © 2013 SECA. Published by Elsevier Espana. All rights reserved.

Communication as a mechanism for cultural integration.

PubMed

Backstrom, Tomas; Hagstrom, Tom; Goransson, Susanna

2013-01-01

Providing autonomy for employees ensures innovation competence if balanced by integration into the organization. The aim of this article is to study processes leading to the integration of employees into the company culture. The two research questions are: What makes the culture of a work group similar to the company culture? How is a work group culture constructed? Theories that are employed concern culture as an organizing structure emerging in the interaction, company culture as a way to exert control, and social networks as a way to describe the interaction. Empirical data come from a merchant bank from which 105 respondents from ten work groups answered questions about their communication and their integration into the company culture. The results show that the sub-culture of the group emerges in communication between members of the group. There seems to be a self-reinforcing spiral between collegial talk, especially about goals, plans and changes at the work place, and cultural integration. All members of a group should be included in this communication to create a strong culture. The value system of the supervisor strongly influences the sub-culture of the work group. Appointing supervisors with values that correspond to the company culture and provide for employee communications is thus central for organizations using culture as a tool for control.

Arrays of microscopic organic LEDs for high-resolution optogenetics

PubMed Central

Steude, Anja; Witts, Emily C.; Miles, Gareth B.; Gather, Malte C.

2016-01-01

Optogenetics is a paradigm-changing new method to study and manipulate the behavior of cells with light. Following major advances of the used genetic constructs over the last decade, the light sources required for optogenetic control are now receiving increased attention. We report a novel optogenetic illumination platform based on high-density arrays of microscopic organic light-emitting diodes (OLEDs). Because of the small dimensions of each array element (6 × 9 μm2) and the use of ultrathin device encapsulation, these arrays enable illumination of cells with unprecedented spatiotemporal resolution. We show that adherent eukaryotic cells readily proliferate on these arrays, and we demonstrate specific light-induced control of the ionic current across the membrane of individual live cells expressing different optogenetic constructs. Our work paves the way for the use of OLEDs for cell-specific optogenetic control in cultured neuronal networks and for acute brain slices, or as implants in vivo. PMID:27386540

CuI as Hole-Transport Channel for Enhancing Photoelectrocatalytic Activity by Constructing CuI/BiOI Heterojunction.

PubMed

Sun, Mingjuan; Hu, Jiayue; Zhai, Chunyang; Zhu, Mingshan; Pan, Jianguo

2017-04-19

In this paper, CuI, as a typical hole-transport channel, was used to construct a high-performance visible-light-driven CuI/BiOI heterostructure for photoelectrocatalytic applications. The heterostructure combines the broad visible absorption of BiOI and high hole mobility of CuI. Compared to pure BiOI, the CuI/BiOI heterostructure exhibited distinctly enhanced photoelectrocatalytic performance for the oxidation of methanol and organic pollutants under visible-light irradiation. The photogenerated electron-hole pairs of the excited BiOI can be separated efficiently through CuI, in which the CuI acts as a superior hole-transport channel to improve photoelectrocatalytic oxidization of methanol and organic pollutants. The outstanding photoelectrocatalytic activity shows that the p-type CuI works as a promising hole-transport channel to improve the photocatalytic performance of traditional semiconductors.

Women's collective constructions of embodied practices through memory work: Cartesian dualism in memories of sweating and pain.

PubMed

Gillies, Val; Harden, Angela; Johnson, Katherine; Reavey, Paula; Strange, Vicki; Willig, Carla

2004-03-01

The research presented in this paper uses memory work as a method to explore six women's collective constructions of two embodied practices, sweating and pain. The paper identifies limitations in the ways in which social constructionist research has theorized the relationship between discourse and materiality, and it proposes an approach to the study of embodiment which enjoins, rather than bridges, the discursive and the non-discursive. The paper presents an analysis of 25 memories of sweating and pain which suggests that Cartesian dualism is central to the women's accounts of their experiences. However, such dualism does not operate as a stable organizing principle. Rather, it offers two strategies for the performance of a split between mind and body. The paper traces the ways in which dualism can be both functional and restrictive, and explores the tensions between these two forms. The paper concludes by identifiying opportunities and limitations associated with memory work as a method for studying embodiment.

The NIMH Research Domain Criteria Initiative: Background, Issues, and Pragmatics.

PubMed

Kozak, Michael J; Cuthbert, Bruce N

2016-03-01

This article describes the National Institute of Mental Health's Research Domain Criteria (RDoC) initiative. The description includes background, rationale, goals, and the way the initiative has been developed and organized. The central RDoC concepts are summarized and the current matrix of constructs that have been vetted by workshops of extramural scientists is depicted. A number of theoretical and methodological issues that can arise in connection with the nature of RDoC constructs are highlighted: subjectivism and heterophenomenology, desynchrony and theoretical neutrality among units of analysis, theoretical reductionism, endophenotypes, biomarkers, neural circuits, construct "grain size," and analytic challenges. The importance of linking RDoC constructs to psychiatric clinical problems is discussed. Some pragmatics of incorporating RDoC concepts into applications for NIMH research funding are considered, including sampling design. Published 2016. This article is a U.S. Government work and is in the public domain in the USA.

Definition and automatic anatomy recognition of lymph node zones in the pelvis on CT images

NASA Astrophysics Data System (ADS)

Liu, Yu; Udupa, Jayaram K.; Odhner, Dewey; Tong, Yubing; Guo, Shuxu; Attor, Rosemary; Reinicke, Danica; Torigian, Drew A.

2016-03-01

Currently, unlike IALSC-defined thoracic lymph node zones, no explicitly provided definitions for lymph nodes in other body regions are available. Yet, definitions are critical for standardizing the recognition, delineation, quantification, and reporting of lymphadenopathy in other body regions. Continuing from our previous work in the thorax, this paper proposes a standardized definition of the grouping of pelvic lymph nodes into 10 zones. We subsequently employ our earlier Automatic Anatomy Recognition (AAR) framework designed for body-wide organ modeling, recognition, and delineation to actually implement these zonal definitions where the zones are treated as anatomic objects. First, all 10 zones and key anatomic organs used as anchors are manually delineated under expert supervision for constructing fuzzy anatomy models of the assembly of organs together with the zones. Then, optimal hierarchical arrangement of these objects is constructed for the purpose of achieving the best zonal recognition. For actual localization of the objects, two strategies are used -- optimal thresholded search for organs and one-shot method for the zones where the known relationship of the zones to key organs is exploited. Based on 50 computed tomography (CT) image data sets for the pelvic body region and an equal division into training and test subsets, automatic zonal localization within 1-3 voxels is achieved.

Decreased Charge Transport Barrier and Recombination of Organic Solar Cells by Constructing Interfacial Nanojunction with Annealing-Free ZnO and Al Layers.

PubMed

Liu, Chunyu; Zhang, Dezhong; Li, Zhiqi; Zhang, Xinyuan; Guo, Wenbin; Zhang, Liu; Ruan, Shengping; Long, Yongbing

2017-07-05

To overcome drawbacks of the electron transport layer, such as complex surface defects and unmatched energy levels, we successfully employed a smart semiconductor-metal interfacial nanojunciton in organic solar cells by evaporating an ultrathin Al interlayer onto annealing-free ZnO electron transport layer, resulting in a high fill factor of 73.68% and power conversion efficiency of 9.81%. The construction of ZnO-Al nanojunction could effectively fill the surface defects of ZnO and reduce its work function because of the electron transfer from Al to ZnO by Fermi level equilibrium. The filling of surface defects decreased the interfacial carrier recombination in midgap trap states. The reduced surface work function of ZnO-Al remodulated the interfacial characteristics between ZnO and [6,6]-phenyl C71-butyric acid methyl ester (PC 71 BM), decreasing or even eliminating the interfacial barrier against the electron transport, which is beneficial to improve the electron extraction capacity. The filled surface defects and reduced interfacial barrier were realistically observed by photoluminescence measurements of ZnO film and the performance of electron injection devices, respectively. This work provides a simple and effective method to simultaneously solve the problems of surface defects and unmatched energy level for the annealing-free ZnO or other metal oxide semiconductors, paving a way for the future popularization in photovoltaic devices.

Implementation of building information modeling in Malaysian construction industry

NASA Astrophysics Data System (ADS)

Memon, Aftab Hameed; Rahman, Ismail Abdul; Harman, Nur Melly Edora

2014-10-01

This study has assessed the implementation level of Building Information Modeling (BIM) in the construction industry of Malaysia. It also investigated several computer software packages facilitating BIM and challenges affecting its implementation. Data collection for this study was carried out using questionnaire survey among the construction practitioners. 95 completed forms of questionnaire received against 150 distributed questionnaire sets from consultant, contractor and client organizations were analyzed statistically. Analysis findings indicated that the level of implementation of BIM in the construction industry of Malaysia is very low. Average index method employed to assess the effectiveness of various software packages of BIM highlighted that Bentley construction, AutoCAD and ArchiCAD are three most popular and effective software packages. Major challenges to BIM implementation are it requires enhanced collaboration, add work to a designer, interoperability and needs enhanced collaboration. For improving the level of implementing BIM in Malaysian industry, it is recommended that a flexible training program of BIM for all practitioners must be created.

A meta-analysis of the relationship between organizational citizenship behavior and counterproductive work behavior.

PubMed

Dalal, Reeshad S

2005-11-01

Job performance is increasingly being seen to encompass constructs such as organizational citizenship behavior (OCB) and counterproductive work behavior (CWB). To clarify the OCB-CWB relationship, a meta-analysis was conducted. Results indicate a modest negative relationship (p = -0.32). The relationship strength did not increase appreciably when the target of the behavior (the organization vs. other employees) was the same. Moreover, OCB and CWB exhibited somewhat distinct patterns of relationships with antecedents. The OCB-CWB relationship was moderated by the source of the ratings, the presence of antithetical items, and the type of response options. An employee-centric perspective is proposed whereby both OCB and CWB are perceived as adaptive behavior. Implications for organizations are discussed. ((c) 2005 APA, all rights reserved).

Controlled Growth of Ultrathin Film of Organic Semiconductors by Balancing the Competitive Processes in Dip-Coating for Organic Transistors.

PubMed

Wu, Kunjie; Li, Hongwei; Li, Liqiang; Zhang, Suna; Chen, Xiaosong; Xu, Zeyang; Zhang, Xi; Hu, Wenping; Chi, Lifeng; Gao, Xike; Meng, Yancheng

2016-06-28

Ultrathin film with thickness below 15 nm of organic semiconductors provides excellent platform for some fundamental research and practical applications in the field of organic electronics. However, it is quite challenging to develop a general principle for the growth of uniform and continuous ultrathin film over large area. Dip-coating is a useful technique to prepare diverse structures of organic semiconductors, but the assembly of organic semiconductors in dip-coating is quite complicated, and there are no reports about the core rules for the growth of ultrathin film via dip-coating until now. In this work, we develop a general strategy for the growth of ultrathin film of organic semiconductor via dip-coating, which provides a relatively facile model to analyze the growth behavior. The balance between the three direct factors (nucleation rate, assembly rate, and recession rate) is the key to determine the growth of ultrathin film. Under the direction of this rule, ultrathin films of four organic semiconductors are obtained. The field-effect transistors constructed on the ultrathin film show good field-effect property. This work provides a general principle and systematic guideline to prepare ultrathin film of organic semiconductors via dip-coating, which would be highly meaningful for organic electronics as well as for the assembly of other materials via solution processes.

[Stress and work-related injuries].

PubMed

Tomei, G; Capozzella, A; Rosati, M V; Tomei, F; Rinaldi, G; Chighine, A; di Marzio, A; Sacco, C; Pimpinella, B; Suppi, A; Scala, B; Casale, T; Sancini, A

2015-01-01

The aim of this study was to evaluate in scientific literature the more frequent work injuries among the occupational categories examined (construction workers, healthcare workers, night workers and shift work, drivers) and to identify occupational stressors that increase the risk of injury. The research was conducted through review of the scientific literature between 1990 and 2014. Two hundred articles were found of which 42 selected in the following categories: construction workers, healthcare workers, shift workers, lorry drivers. The movement of machinery and working at height are due to injury for building sector and they were positively correlated with physical (r = 0,206) and mental (r = 0,254) stress. In health workers the injuries are more frequently bruises and sprains (50%). Studies showed a higher rate of injury in a group of shift workers compared to a control group on a rota basis (p <0.0001). Road accidents for drivers represent the most frequent cause of injury of which 13% comes from falling asleep, while 31% from distractions (OR = 3.16; CI = 1:22 to 8:24). Nurses have frequent injuries due to bruises, lumbago, punctures with needles and surgical wounds. Construction workers often suffer serious injury derived from falls at height, handling machinery. For workers on a rota basis, injuries are often related to lack of sleep. Road accidents in drivers are the most common injuries. A synergistic action finalized to promote health and safety organization, to ensure a work environment more secure, is advisable.

Semiconducting Organic-Inorganic Nanodots Heterojunctions: Platforms for General Photoelectrochemical Bioanalysis Application.

PubMed

Wang, Qian; Ruan, Yi-Fan; Zhao, Wei-Wei; Lin, Peng; Xu, Jing-Juan; Chen, Hong-Yuan

2018-03-20

In this study, semiconducting organic polymer dots (Pdots) and inorganic quantum dots (Qdots) were first utilized to construct the organic-inorganic nanodots heterojunction for the photoelectrochemical (PEC) bioanalysis application. Specifically, n-type CdS Qdots, p-type CdTe Qdots, and tetraphenylporphyrin (TPP)-doped poly[(9,9-dioctylfluorenyl-2,7-diyl)- co-(1,4-benzo-{2,1',3}-thiadazole)] (PFBT) Pdots were fabricated, and their energy levels, that is, their valence band (VB)/conduction band (CB) or lowest unoccupied molecular orbital (LUMO)/highest occupied molecular orbital (HOMO) values, were also determined. Then, these nanodots were integrated to construct four types of p-n and p-p organic-inorganic nanodots heterojunctions, that is, CdS Qdots/TPP-doped PFBT Pdots, TPP-doped PFBT Pdots/CdS Qdots, CdTe Qdots/TPP-doped PFBT Pdots, and TPP-doped PFBT Pdots/CdTe Qdots, on the transparent glass electrode. Upon light irradiation, four heterojunctions exhibited different PEC behaviors with some having prominent photocurrent enhancement. With the model molecule l-cysteine (l-cys) as target, the proposed PEC sensor exhibited good performances. In brief, this work presents the first semiconducting organic-inorganic nanodots heterojunction for PEC bioanalysis application, which could be easily used as a general platform for future PEC bioanalysis building. Besides, it is expected to inspire more interest in the design, development, and implementation of various organic-inorganic heterojunctions for advanced PEC bioanalysis in the future.

Geotransects in the Taiwan region

NASA Astrophysics Data System (ADS)

Yen, T. P.; Yeh, Yih-Hsing

The Republic of China National Committee for the Inter-Union Commission on the Lithosphere organized an ad hoc working group in 1988 for compilation and construction of geotransects in the Taiwan region, a region considered by the scientific world as a classic example of collision and subduction of plates.Three geotransects have been constructed, with insufficient data: geotransect N along latitude 24°30‧N, geotransect M along latitude 23°30‧, and geotransect S along latitude 22°30‧N. The data used in the constructions are mainly scattered in publications on the geology and geophysics of Taiwan. The purpose of the study is to promote further investigation of the mechanism of plate motion in terms of geology and geophysics, to improve interpretation of the geotectonics of the region.

A Semantics-Based Approach to Construction Cost Estimating

ERIC Educational Resources Information Center

Niknam, Mehrdad

2015-01-01

A construction project requires collaboration of different organizations such as owner, designer, contractor, and resource suppliers. These organizations need to exchange information to improve their teamwork. Understanding the information created in other organizations requires specialized human resources. Construction cost estimating is one of…

Methods of erection of high-rise buildings

NASA Astrophysics Data System (ADS)

Cherednichenko, Nadezhda; Oleinik, Pavel

2018-03-01

The article contains the factors determining the choice of methods for organizing the construction and production of construction and installation work for the construction of high-rise buildings. There are also indicated specific features of their underground parts, characterized by powerful slab-pile foundations, large volumes of earthworks, reinforced bases and foundations for assembly cranes. The work cycle is considered when using reinforced concrete, steel and combined skeletons of high-rise buildings; the areas of application of flow, separate and complex methods are being disclosed. The main conditions for the erection of high-rise buildings and their components are singled out: the choice of formwork systems, delivery and lifting of concrete mixes, installation of reinforcement, the formation of lifting and transporting and auxiliary equipment. The article prescribes the reserves of reduction in the duration of construction due to the creation of: complex mechanized technologies for the efficient construction of foundations in various soil conditions, including in the heaving, swelling, hindered, subsidence, bulk, water-saturated forms; complex mechanized technologies for the erection of monolithic reinforced concrete structures, taking into account the winter conditions of production and the use of mobile concrete-laying complexes and new generation machines; modular formwork systems, distinguished by their versatility, ease, simplicity in operation suitable for complex high-rise construction; more perfect methodology and the development of a set of progressive organizational and technological solutions that ensure a rational relationship between the processes of production and their maximum overlap in time and space.

Communications among elements of a space construction ensemble

NASA Technical Reports Server (NTRS)

Davis, Randal L.; Grasso, Christopher A.

1989-01-01

Space construction projects will require careful coordination between managers, designers, manufacturers, operators, astronauts, and robots with large volumes of information of varying resolution, timeliness, and accuracy flowing between the distributed participants over computer communications networks. Within the CSC Operations Branch, we are researching the requirements and options for such communications. Based on our work to date, we feel that communications standards being developed by the International Standards Organization, the CCITT, and other groups can be applied to space construction. We are currently studying in depth how such standards can be used to communicate with robots and automated construction equipment used in a space project. Specifically, we are looking at how the Manufacturing Automation Protocol (MAP) and the Manufacturing Message Specification (MMS), which tie together computers and machines in automated factories, might be applied to space construction projects. Together with our CSC industrial partner Computer Technology Associates, we are developing a MAP/MMS companion standard for space construction and we will produce software to allow the MAP/MMS protocol to be used in our CSC operations testbed.

ITER Construction—Plant System Integration

NASA Astrophysics Data System (ADS)

Tada, E.; Matsuda, S.

2009-02-01

This brief paper introduces how the ITER will be built in the international collaboration. The ITER Organization plays a central role in constructing ITER and leading it into operation. Since most of the ITER components are to be provided in-kind from the member countries, integral project management should be scoped in advance of real work. Those include design, procurement, system assembly, testing, licensing and commissioning of ITER.

Five rules for the evolution of cooperation

PubMed Central

Nowak, Martin A.

2011-01-01

Cooperation is needed for evolution to construct new levels of organization. The emergence of genomes, cells, multi-cellular organisms, social insects and human society are all based on cooperation. Cooperation means that selfish replicators forgo some of their reproductive potential to help one another. But natural selection implies competition and therefore opposes cooperation unless a specific mechanism is at work. Here I discuss five mechanisms for the evolution of cooperation: kin selection, direct reciprocity, indirect reciprocity, network reciprocity and group selection. For each mechanism, a simple rule is derived which specifies whether natural selection can lead to cooperation. PMID:17158317

Peculiarities of organizing the construction of nuclear medicine facilities and the transportation of radionuclide

NASA Astrophysics Data System (ADS)

Telichenko, Valeriy; Malykha, Galina; Dorogan, Igor

2017-10-01

The article is devoted to the organization of construction of nuclear medicine facilities in Russia. The article describes the main methods of nuclear medical diagnostics, as well as the peculiarities of nuclear medicine facilities that determine the need for application of specific methods for organizing and managing the construction, methods of requirements management in the organization of construction of nuclear medicine facilities. Sustainable development of the transport of radioactive isotopes from the place of production to places of consumption is very important for the safety of the population. The requirements management system is an important and necessary component in organizing the construction of complex facilities, such as nuclear medicine facilities. The author developed and proposed a requirements management system for the design, construction and operation of a nuclear medicine facility, which provides for a cyclic sequence of actions. This system allows reducing the consumption of resources including material and energy during construction and operation of complex objects.

Identity as "knowing your place": the narrative construction of space in a healthcare profession.

PubMed

van Vuuren, Mark; Westerhof, Gerben J

2015-03-01

The construction of space in which a story takes place can have important consequences for the evaluation of health interventions. In this article, we explore the ways professionals narratively position themselves in a situation, treating identity literally as "knowing one's place." More specifically, we explore the spatial language health professionals use to describe their work. Using descriptions of professionals in a drug habilitation organization, we illustrate how they use route (i.e., an active tour through the space), survey (i.e., a stationary viewpoint from above), and gaze perspectives (i.e. a stable viewpoint onto a place) to explain the work situations they encounter. Each of these perspectives facilitates a different mode of evaluation in terms of distance, emotion, and identity. We propose opportunities for research and implications of the ways in which spaces and spatial perspectives set the scene in the narratives of healthcare professionals. © The Author(s) 2015.

Semiotic diversity in utterance production and the concept of ‘language’

PubMed Central

Kendon, Adam

2014-01-01

Sign language descriptions that use an analytic model borrowed from spoken language structural linguistics have proved to be not fully appropriate. Pictorial and action-like modes of expression are integral to how signed utterances are constructed and to how they work. However, observation shows that speakers likewise use kinesic and vocal expressions that are not accommodated by spoken language structural linguistic models, including pictorial and action-like modes of expression. These, also, are integral to how speaker utterances in face-to-face interaction are constructed and to how they work. Accordingly, the object of linguistic inquiry should be revised, so that it comprises not only an account of the formal abstract systems that utterances make use of, but also an account of how the semiotically diverse resources that all languaging individuals use are organized in relation to one another. Both language as an abstract system and languaging should be the concern of linguistics. PMID:25092661

Stimulated emission within the exciplex band by plasmonic-nanostructured polymeric heterojunctions

NASA Astrophysics Data System (ADS)

Zhang, Xinping; Li, Hongwei; Wang, Yimeng; Liu, Feifei

2015-03-01

Organic heterojunctions have been extensively employed in the design of light-emitting diodes, photovoltaic devices, and thin-film field-effect transistors, which can be achieved by constructing a bilayer or a multi-layered thin-film deposition, or by blending two or more organic semiconductors with different charge-transport performances. Charge transfer excited states or exciplex may form on the heterointerfaces. Efficient light-emitting diodes have been demonstrated using exciplex emission. However, lasing or stimulated emission processes have not been observed with exciplex formation at organic heterojunctions. In this work, we demonstrate strong coherent interaction between photons and exciplex formation in the blends of poly-9,9'-dioctylfluorene-co-bis-N,N'-(4-butylphenyl)-bis-N,N'-phenyl-l,4-phenylenediamine (PFB) and poly-9,9'-dioctylfluorene-co-benzothiadiazole (F8BT), leading to transient stimulated exciplex emission. The responsible mechanisms involve plasmonic local-field enhancement and plasmonic feedback in a three-dimensional gold-nanoparticle matrix.Organic heterojunctions have been extensively employed in the design of light-emitting diodes, photovoltaic devices, and thin-film field-effect transistors, which can be achieved by constructing a bilayer or a multi-layered thin-film deposition, or by blending two or more organic semiconductors with different charge-transport performances. Charge transfer excited states or exciplex may form on the heterointerfaces. Efficient light-emitting diodes have been demonstrated using exciplex emission. However, lasing or stimulated emission processes have not been observed with exciplex formation at organic heterojunctions. In this work, we demonstrate strong coherent interaction between photons and exciplex formation in the blends of poly-9,9'-dioctylfluorene-co-bis-N,N'-(4-butylphenyl)-bis-N,N'-phenyl-l,4-phenylenediamine (PFB) and poly-9,9'-dioctylfluorene-co-benzothiadiazole (F8BT), leading to transient stimulated exciplex emission. The responsible mechanisms involve plasmonic local-field enhancement and plasmonic feedback in a three-dimensional gold-nanoparticle matrix. Electronic supplementary information (ESI) available. See DOI: 10.1039/c5nr00140d

Epidemiology of work-related injuries among insured construction workers in Iran

PubMed Central

Hatami, Seyed Esmaeil; Ravandi, Mohammad Reza Ghotbi; Hatami, Seyedeh Tayebeh; Khanjani, Narges

2017-01-01

Background and aim Work-related injuries are among the most important health problems in developing countries, such as Iran. The purpose of this study was to determine the epidemiology of work-related injuries among construction workers who had been insured by the Iranian Social Security Organization (ISSO). Methods This is a cross-sectional study. The population included all construction workers who had a work- related accident during 2012 in Iran, which were recorded in the ISSO database after inspection. The effects of independent variables on injuries were estimated by logistic regression. SPSS software version 18 was used for analyzing the data. Results Overall, 5352 work-related injuries were investigated. The incidence rate of fatal and nonfatal injuries was 0.07 in 1000 and 11.18 in 1000 workers, respectively. More than half of these accidents were due to careless activities. A younger age at the time of the accident (OR=0.98, CI: 0.97–0.99, p=0.001), being married (OR=1.37, CI: 1.04–1.79, p=0.02), place of accident (OR=1.86, CI: 1.18–2.92, p=0.007), lack of information (OR=5.28, CI: 1.57–17.75, p=0.007), disrespect of safety regulations (OR=3.11, CI: 1.87–5.17, p=0.001), non-use of protective equipment (OR=2.98, CI: 1.62–5.50, p=0.001), and defective equipment (OR=2.22, CI: 1.18–4.20, p=0.01) had a significant effect on the incidence of work-related injury. Conclusions The pattern of work-related injury in Iran was almost similar in regard to age, gender, cause and type of the accident, with other parts of the world. PMID:29403628

Epidemiology of work-related injuries among insured construction workers in Iran.

PubMed

Hatami, Seyed Esmaeil; Ravandi, Mohammad Reza Ghotbi; Hatami, Seyedeh Tayebeh; Khanjani, Narges

2017-11-01

Work-related injuries are among the most important health problems in developing countries, such as Iran. The purpose of this study was to determine the epidemiology of work-related injuries among construction workers who had been insured by the Iranian Social Security Organization (ISSO). This is a cross-sectional study. The population included all construction workers who had a work- related accident during 2012 in Iran, which were recorded in the ISSO database after inspection. The effects of independent variables on injuries were estimated by logistic regression. SPSS software version 18 was used for analyzing the data. Overall, 5352 work-related injuries were investigated. The incidence rate of fatal and nonfatal injuries was 0.07 in 1000 and 11.18 in 1000 workers, respectively. More than half of these accidents were due to careless activities. A younger age at the time of the accident (OR=0.98, CI: 0.97-0.99, p=0.001), being married (OR=1.37, CI: 1.04-1.79, p=0.02), place of accident (OR=1.86, CI: 1.18-2.92, p=0.007), lack of information (OR=5.28, CI: 1.57-17.75, p=0.007), disrespect of safety regulations (OR=3.11, CI: 1.87-5.17, p=0.001), non-use of protective equipment (OR=2.98, CI: 1.62-5.50, p=0.001), and defective equipment (OR=2.22, CI: 1.18-4.20, p=0.01) had a significant effect on the incidence of work-related injury. The pattern of work-related injury in Iran was almost similar in regard to age, gender, cause and type of the accident, with other parts of the world.

A review of best work-absence management and return-to-work practices for workers with musculoskeletal or common mental disorders.

PubMed

Durand, Marie-José; Corbière, Marc; Coutu, Marie-France; Reinharz, Daniel; Albert, Valérie

2014-01-01

Workplace absenteeism is still a curse for developed countries, and more systematic practices need to be adopted to address this issue. To review the literature on best practices for managing work absences related to musculoskeletal or common mental disorders. A review was conducted by performing a search in bibliographic databases and on work-disability research institute websites. Recommendations regarding work-absence management and return-to-work practices were extracted from all the retained documents and organized within a chronological framework. In total, 17 documents were analyzed, leading to identification of common work-absence management and return-to-work practices, the importance of a worker support approach, and recommended roles and responsibilities for stakeholders. These practices were then integrated into a six-step process: (1) time off and recovery period; (2) initial contact with the worker; (3) evaluation of the worker and his job tasks; (4) development of a return-to-work plan with accommodations; (5) work resumption, and (6) follow-up of the return-to-work process. Based on this review, we constructed a comprehensive work-absence management and return-to-work process designed to assist organizations. Our results indicate that such a process must be included within a broader policy of health promotion and job retention. Adaptations will be required for implementation in the workplace.

Promoting and developing a trail network across suburban, rural, and urban communities.

PubMed

Schasberger, Michele G; Hussa, Carol S; Polgar, Michael F; McMonagle, Julie A; Burke, Sharon J; Gegaris, Andrew J

2009-12-01

The Wyoming Valley Wellness Trails Partnership received an Active Living by Design grant late in 2003 for a project centered on a growing trail network linking urban, suburban, and rural communities in northeast Pennsylvania, a former coal region, in order to increase physical activity among residents. The partnership conducted research, collected information, created promotional documents, worked with partners on events and programs, and participated in trail planning. Local trail organizations continued planning and construction toward developing a trail network. Other partners spearheaded policy change in schools and worksites and worked toward downtown revitalization. The partnership assisted these efforts by providing a forum in which organizations could meet. The partnership became a central resource for information about local parks, trails, and outdoor recreational activities. The partnership increased awareness and use of recreational facilities. Trail partners constructed 22 miles of walking and biking trails. The partnership took advantage of an allied effort that created organizational capacity for wellness in schools and worksites. Messages promoting social and entertainment benefits of physical activity were more successful than those promoting health benefits. The existence of multiple small, independent trail organizations can help advance trail development through concurrent development efforts. Urban, suburban, and rural residents' conceptions of walkability may differ. Trails provide options for recreational and transportation-related physical activity across urban, suburban, and rural landscapes that are supported by all constituents. Trail builders can be strong allies in bringing active living to suburban and rural places.

The Work Ability of Hong Kong Construction Workers in Relation to Individual and Work-Related Factors.

PubMed

Ng, Jacky Y K; Chan, Alan H S

2018-05-14

The shortage in Hong Kong of construction workers is expected to worsen in future due to the aging population and increasing construction activity. Construction work is dangerous and to help reduce the premature loss of construction workers due to work-related disabilities, this study measured the work ability of 420 Hong Kong construction workers with a Work Ability Index (WAI) which can be used to predict present and future work performance. Given the importance of WAI, in this study the effects of individual and work-related factors on WAI were examined to develop and validate a WAI model to predict how individual and work-related factors affect work ability. The findings will be useful for formulating a pragmatic intervention program to improve the work ability of construction workers and keep them in the work force.

The relationship between work climate and nurse educators' use of information technology.

PubMed

Gonen, Ayala; Lev-Ari, Lilac

2016-04-01

Understanding organizational behavior and the attitudes of individuals in organizations is crucial for policymakers and managers. Work climate is a major part of these constructs. The main goal of this study was to examine the perceptions of academic nurse educators about their work climate, concerning the use of information technology (IT), including examining a number of variables such as self-efficacy, innovativeness, attitudes, intention to use, and actual use of information technology. This study used a quantitative research design, using written and online surveys submitted to 109 academic nurse educators working at ten different academic nursing schools in Israel. The relationship between work climate and actual use of IT was mediated by personality characteristics such as attitude toward using IT, self-efficacy, and innovativeness. Work climate positively predicted both self-efficacy and attitudes toward IT, but did not directly predict innovativeness and did not predict actual use. Policymakers and managers should consider work climate and personality characteristics as important factors in their efforts to promote IT use in nursing. As a result, nurse educators would become better acquainted with new technologies, and their acceptance of IT would improve. The organization would benefit from a better work environment and from enhanced performance. Copyright © 2016 Elsevier Ltd. All rights reserved.

Psychosocial safety climate, emotional demands, burnout, and depression: a longitudinal multilevel study in the Malaysian private sector.

PubMed

Idris, Mohd Awang; Dollard, Maureen F; Yulita

2014-07-01

This multilevel longitudinal study investigates a newly identified climate construct, psychosocial safety climate (PSC), as a precursor to job characteristics (e.g., emotional demands), and psychological outcomes (i.e., emotional exhaustion and depression). We argued that PSC, as an organizational climate construct, has cross-level effects on individually perceived job design and psychological outcomes. We hypothesized a mediation process between PSC and emotional exhaustion particularly through emotional demands. In sequence, we predicted that emotional exhaustion would predict depression. At Time 1, data were collected from employees in 36 Malaysian private sector organizations (80% responses rate), n = 253 (56%), and at Time 2 from 27 organizations (60%) and n = 117 (46%). Using hierarchical linear modeling (HLM), we found that there were cross-level effects of PSC Time 1 on emotional demands Time 2 and emotional exhaustion Time 2, but not on depression Time 2, across a 3-month time lag. We found evidence for a lagged mediated effect; emotional demands mediated the relationship between PSC and emotional exhaustion. Emotional exhaustion did not predict depression. Finally, our results suggest that PSC is an important organizational climate construct, and acts to reduce employee psychological problems in the workplace, via working conditions.

The Work Ability of Hong Kong Construction Workers in Relation to Individual and Work-Related Factors

PubMed Central

Ng, Jacky Y. K.

2018-01-01

The shortage in Hong Kong of construction workers is expected to worsen in future due to the aging population and increasing construction activity. Construction work is dangerous and to help reduce the premature loss of construction workers due to work-related disabilities, this study measured the work ability of 420 Hong Kong construction workers with a Work Ability Index (WAI) which can be used to predict present and future work performance. Given the importance of WAI, in this study the effects of individual and work-related factors on WAI were examined to develop and validate a WAI model to predict how individual and work-related factors affect work ability. The findings will be useful for formulating a pragmatic intervention program to improve the work ability of construction workers and keep them in the work force. PMID:29758018

Gender, aging, and work: aging workers' strategies to confront the demands of production in maquiladora plants in nogales, Mexico.

PubMed

Adarga, Mireya Scarone; Becerril, Leonor Cedillo; Champion, Catalina Denman

2010-01-01

This work is part of a qualitative socio-cultural investigation with a group of men and women 40 years and older in the maquila export industry in Nogales, Sonora, Mexico. In 1994, as a result of the North American Free Trade Agreement, maquila plants combined traditional intensive work methods with new "just in time" production norms that impacted work and health conditions, particularly in older, or aging, workers. The workers that were interviewed for this study show a reduction in their functional ability to work starting at 40 years of age. Work organization demands, general health conditions, and a decrease in physical abilities brings these 40-year-old workers to prematurely construct an image of themselves as aging workers and to develop coping strategies that vary by gender.

Liquid crystal-based Mueller matrix spectral imaging polarimetry for parameterizing mineral structural organization.

PubMed

Gladish, James C; Duncan, Donald D

2017-01-20

Herein, we discuss the remote assessment of the subwavelength organizational structure of a medium. Specifically, we use spectral imaging polarimetry, as the vector nature of polarized light enables it to interact with optical anisotropies within a medium, while the spectral aspect of polarization is sensitive to small-scale structure. The ability to image these effects allows for inference of spatial structural organization parameters. This work describes a methodology for revealing structural organization by exploiting the Stokes/Mueller formalism and by utilizing measurements from a spectral imaging polarimeter constructed from liquid crystal variable retarders and a liquid crystal tunable filter. We provide results to validate the system and then show results from measurements on a mineral sample.

Paradoxical Change and Construction of Identity in an Educational Organization

ERIC Educational Resources Information Center

Puusa, Anu; Kuittinen, Matti; Kuusela, Pekka

2013-01-01

This article focuses on the construction of organizational identity and the strategic change in an educational organization. The aim of this empirical study is to examine how the members of an educational organization construct the meaning of "who we are" during an ongoing change. In addition, we examine whether it is reasonable to…

The methodic of calculation for the need of basic construction machines on construction site when developing organizational and technological documentation

NASA Astrophysics Data System (ADS)

Zhadanovsky, Boris; Sinenko, Sergey

2018-03-01

Economic indicators of construction work, particularly in high-rise construction, are directly related to the choice of optimal number of machines. The shortage of machinery makes it impossible to complete the construction & installation work on scheduled time. Rates of performance of construction & installation works and labor productivity during high-rise construction largely depend on the degree of provision of construction project with machines (level of work mechanization). During calculation of the need for machines in construction projects, it is necessary to ensure that work is completed on scheduled time, increased level of complex mechanization, increased productivity and reduction of manual work, and improved usage and maintenance of machine fleet. The selection of machines and determination of their numbers should be carried out by using formulas presented in this work.

Mechanisation and automation technologies development in work at construction sites

NASA Astrophysics Data System (ADS)

Sobotka, A.; Pacewicz, K.

2017-10-01

Implementing construction work that creates buildings is a very complicated and laborious task and requires the use of various types of machines and equipment. For years there has been a desire for designers and technologists to introduce devices that replace people’s work on machine construction, automation and even robots. Technologies for building construction are still being developed and implemented to limit people’s hard work and improve work efficiency and quality in innovative architectonical and construction solutions. New opportunities for improving work on the construction site include computerisation of technological processes and construction management for projects and processes. The aim of the paper was to analyse the development of mechanisation, automation and computerisation of construction processes and selected building technologies, with special attention paid to 3D printing technology. The state of mechanisation of construction works in Poland and trends in its development in construction technologies are presented. These studies were conducted on the basis of the available literature and a survey of Polish construction companies.

Additive Manufacturing of Biomedical Constructs with Biomimetic Structural Organizations.

PubMed

Li, Xiao; He, Jiankang; Zhang, Weijie; Jiang, Nan; Li, Dichen

2016-11-09

Additive manufacturing (AM), sometimes called three-dimensional (3D) printing, has attracted a lot of research interest and is presenting unprecedented opportunities in biomedical fields, because this technology enables the fabrication of biomedical constructs with great freedom and in high precision. An important strategy in AM of biomedical constructs is to mimic the structural organizations of natural biological organisms. This can be done by directly depositing cells and biomaterials, depositing biomaterial structures before seeding cells, or fabricating molds before casting biomaterials and cells. This review organizes the research advances of AM-based biomimetic biomedical constructs into three major directions: 3D constructs that mimic tubular and branched networks of vasculatures; 3D constructs that contains gradient interfaces between different tissues; and 3D constructs that have different cells positioned to create multicellular systems. Other recent advances are also highlighted, regarding the applications of AM for organs-on-chips, AM-based micro/nanostructures, and functional nanomaterials. Under this theme, multiple aspects of AM including imaging/characterization, material selection, design, and printing techniques are discussed. The outlook at the end of this review points out several possible research directions for the future.

Proceedings of a conference on sustainability of wetlands and water resources: how well can riverine wetlands continue to support society into the 21st century?

Treesearch

Marjorie M. Holland; Melvin L. Warren; John A. Stanturf; [Editors

2002-01-01

The conference focused on recent work in freshwater wetlands [both natural and constructed] with a view toward understanding wetland processes in a watershed context. Since humans have played important roles in watershed dynamics for years, attention was given to the human dimensions of wetland and watershed uses. Contributed sessions were organized on: biogeochemical...

How the Army Runs: A Senior Leader Reference Handbook, 2011-2012

DTIC Science & Technology

2011-01-01

5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES...objectives, carrying out engineer construction projects , by emphasizing the uniqueness of the function and providing associated specialty career...Bringing about change, whether evolutionary or revolutionary, in cases where performance does not meet present requirements, or the projected security

How The Army Runs. A Senior Leader Reference Handbook 2009-2010

DTIC Science & Technology

2010-01-01

PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES...recruiting objectives, carrying out engineer construction projects , by emphasizing the uniqueness of the function and providing associated specialty career...change, whether evolutionary or revolutionary, in cases where performance does not meet present requirements, or the projected security needs of the

Translations on USSR Resources, Number 820

DTIC Science & Technology

1978-08-02

enterprises utilizing their own building organization, the census taker shall enter "In construction on a sawmill," "In repairs on a confectionery ...Jlrifonov;. they dealt with current problems of activating the party’s influence oh the work of production and supply- marketing organiza- tions. They...etc. The demand for lumber also is great on the world market . How- ever, its value will increase still more in the future. Therefore the

Measuring the emotional climate of an organization.

PubMed

Yurtsever, Gülçimen; De Rivera, Joseph

2010-04-01

The importance of emotional climate in the organizational climate literature has gained interest. However, few studies have concentrated on adequately measuring the emotional climate of organizations. In this study, a reliable and valid scale was developed to measure the most important aspects of emotional climate in different organizations. This study presents evidence of reliability and validity for 28 items constructed to measure emotional climate in an organization in four separate studies. The data were obtained from working people from four different organizations by self-administered questionnaires. The findings indicate that three factors--Trust, Hope, and Security--were factors of the 28-item scale. Validation data also included correlations with duration of employment. The other method of assessing criterion validity was by comparing mean scores in organizations with differing productivity; results indicated that the organization with more productive members had a significantly higher mean score on emotional climate and its subscales. The generalizability of the results to private businesses also was assessed.

Thinking about "culture": some programme pointers.

PubMed

Dawit, S; Busia, A

1995-02-01

This article exhorts development workers to develop an understanding of their own cultural heritage in order to understand how cultural subjectivity influences their work. While not endorsing "cultural relativism," the authors stress that women must work within their own cultures to develop empowerment and combat culturally legitimized practices which are harmful to women. Cultural constructs must be examined in order to understand such issues as the Northern tendency to encourage personal individualism and the Southern tendency to organize along communal lines. Gender identity is also a social construction which calls for a consideration of each situation (or harmful practice) as uniquely based in a given cultural context. General agreement exists, however, that in order to tackle gender oppression, women must be empowered and their status must be improved. Thus development initiatives should support longterm investment in research and programs, illiteracy rates must be decreased, and educational opportunities must be sought in every program. Women's groups must link up to share resources with each other and with traditional nongovernmental organizations. Governments should 1) integrate a gender component into every Ministry; 2) emphasize literacy for girls and women; 3) support local women's initiatives; 4) provide gender-sensitive training for professionals in critical fields; 5) increase attention to the needs of young women; and 6) offer more women visible official posts in public service.

The Construction of the Siam Photon Laboratory and Its Ripple Effects

NASA Astrophysics Data System (ADS)

Ishii, Takehiko

2004-03-01

The Siam Photon Laboratory of the National Synchrotron Research Center(NSRC) is a synchrotron radiation research facility built for promoting the scientific and technological research activity of the country and enhancing the human resources development. The accelerator complex was originally owned by the SORTEC Laboratory in Tsukuba and transferred to NSRC gratis. The storage ring design was renewed and the construction of the whole accelerator complex with the reformed storage ring was completed two years ago. In the course of the construction, we found many problems distinctive of second hand machines. The maximum stored current and the beam lifetime at present are 210mA and 6hr at 100mA, respectively. One beam line for photoemission experiments has been opened to outside users. First experimental studies made on Ni(111) by our staff members has been completed. Since the project started from scratch, NSRC was asked to carry out all work necessary for opening the facility to outside users, The work includes collecting users and setting up the users organization. In industrial applications, for instance, we have to find either some government or private sectors who are interested in the fundamantal technological research using synchrotorn radiation. Then, the training of users from the relevant organizations will start. After the establishment of the Siam Photon Laboratory, the trend of the promotion of pertinent research has increased. More fundamental human resources development including the graduate school education is underway around the Siam Photon Laboratory. The growth of enterprises as a part of the infrastructure is slow but steady.

The problems and perspectives for the introduction of high-rise construction in Russian cities

NASA Astrophysics Data System (ADS)

Pershina, Anna; Radzhabov, Mehman; Dormidontova, Tatyana

2018-03-01

The propose of academic affairs is discovery the principal areas of concern high-rise construction in Russia. Examples of modern Russian and foreign high-rise construction are considered in the work. The most important problems and their solutions for Russia are identified on their basis. The everyone area of concern is considered separately. Ecology problems and influence of high-rise construction for the healthy and psychological effect of people are considered special. High-rise constructions influence negative and positive for urban environment in Moscow and Samara cities. The experience lack, defects in requirements document, which don't include all high-rise constructions specific, system problem of construction and often non-availability of proper control at the existing requirements document result for complexity of designing, construction and operation. At this moment, high-rise constructions temp is increasing in Moscow. Feasibility of high-rise buildings come up in regions of Russia. The reasons include high material inputs, irregularities of requirements network and utility lines and maintenance problems. The researching follow up of conclusions and recommendations for high-rise constructions development in Russia. The reasons of high-rise buildings are urbanization of people and necessary of concentration labor supply. The important tasks for organization are creating compact urban environment, decrease urban area for development, using an innovative technology for construction and properly maintenance. The balance between the preference of high-rise construction, inputs for construction and influence for ecology are resolve for this task.

Technique for Determination of Rational Boundaries in Combining Construction and Installation Processes Based on Quantitative Estimation of Technological Connections

NASA Astrophysics Data System (ADS)

Gusev, E. V.; Mukhametzyanov, Z. R.; Razyapov, R. V.

2017-11-01

The problems of the existing methods for the determination of combining and technologically interlinked construction processes and activities are considered under the modern construction conditions of various facilities. The necessity to identify common parameters that characterize the interaction nature of all the technology-related construction and installation processes and activities is shown. The research of the technologies of construction and installation processes for buildings and structures with the goal of determining a common parameter for evaluating the relationship between technologically interconnected processes and construction works are conducted. The result of this research was to identify the quantitative evaluation of interaction construction and installation processes and activities in a minimum technologically necessary volume of the previous process allowing one to plan and organize the execution of a subsequent technologically interconnected process. The quantitative evaluation is used as the basis for the calculation of the optimum range of the combination of processes and activities. The calculation method is based on the use of the graph theory. The authors applied a generic characterization parameter to reveal the technological links between construction and installation processes, and the proposed technique has adaptive properties which are key for wide use in organizational decisions forming. The article provides a written practical significance of the developed technique.

Risk-based Analysis of Construction Accidents in Iran During 2007-2011-Meta Analyze Study.

PubMed

Amiri, Mehran; Ardeshir, Abdollah; Fazel Zarandi, Mohammad Hossein

2014-04-01

The present study aimed to investigate the characteristics of occupational accidents and frequency and severity of work related accidents in the construction industry among Iranian insured workers during the years 20072011. The Iranian Social Security Organization (ISSO) accident database containing 21,864 cases between the years 2007-2011 was applied in this study. In the next step, Total Accident Rate (TRA), Total Severity Index (TSI), and Risk Factor (RF) were defined. The core of this work is devoted to analyzing the data from different perspectives such as age of workers, occupation and construction phase, day of the week, time of the day, seasonal analysis, regional considerations, type of accident, and body parts affected. Workers between 15-19 years old (TAR=13.4%) are almost six times more exposed to risk of accident than the average of all ages (TAR=2.51%). Laborers and structural workers (TAR=66.6%) and those working at heights (TAR=47.2%) experience more accidents than other groups of workers. Moreover, older workers over 65 years old (TSI=1.97%> average TSI=1.60%), work supervisors (TSI=12.20% >average TSI=9.09%), and night shift workers (TSI=1.89% >average TSI=1.47%) are more prone to severe accidents. It is recommended that laborers, young workers, weekend and night shift workers be supervised more carefully in the workplace. Use of Personal Protective Equipment (PPE) should be compulsory in working environments, and special attention should be undertaken to people working outdoors and at heights. It is also suggested that policymakers pay more attention to the improvement of safety conditions in deprived and cold western regions.

Risk-based Analysis of Construction Accidents in Iran During 2007-2011-Meta Analyze Study

PubMed Central

AMIRI, Mehran; ARDESHIR, Abdollah; FAZEL ZARANDI, Mohammad Hossein

2014-01-01

Abstract Background The present study aimed to investigate the characteristics of occupational accidents and frequency and severity of work related accidents in the construction industry among Iranian insured workers during the years 20072011. Methods The Iranian Social Security Organization (ISSO) accident database containing 21,864 cases between the years 2007-2011 was applied in this study. In the next step, Total Accident Rate (TRA), Total Severity Index (TSI), and Risk Factor (RF) were defined. The core of this work is devoted to analyzing the data from different perspectives such as age of workers, occupation and construction phase, day of the week, time of the day, seasonal analysis, regional considerations, type of accident, and body parts affected. Results Workers between 15-19 years old (TAR=13.4%) are almost six times more exposed to risk of accident than the average of all ages (TAR=2.51%). Laborers and structural workers (TAR=66.6%) and those working at heights (TAR=47.2%) experience more accidents than other groups of workers. Moreover, older workers over 65 years old (TSI=1.97%> average TSI=1.60%), work supervisors (TSI=12.20% >average TSI=9.09%), and night shift workers (TSI=1.89% >average TSI=1.47%) are more prone to severe accidents. Conclusion It is recommended that laborers, young workers, weekend and night shift workers be supervised more carefully in the workplace. Use of Personal Protective Equipment (PPE) should be compulsory in working environments, and special attention should be undertaken to people working outdoors and at heights. It is also suggested that policymakers pay more attention to the improvement of safety conditions in deprived and cold western regions. PMID:26005662

Determination of sustainable values for the parameters of the construction of residential buildings

NASA Astrophysics Data System (ADS)

Grigoreva, Larisa; Grigoryev, Vladimir

2018-03-01

For the formation of programs for housing construction and planning of capital investments, when developing the strategic planning companies by construction companies, the norms or calculated indicators of the duration of the construction of high-rise residential buildings and multifunctional complexes are mandatory. Determination of stable values of the parameters for the high-rise construction residential buildings provides an opportunity to establish a reasonable duration of construction at the planning and design stages of residential complexes, taking into account the influence of market conditions factors. The concept of the formation of enlarged models for the high-rise construction residential buildings is based on a real mapping in time and space of the most significant redistribution with their organizational and technological interconnection - the preparatory period, the underground part, the above-ground part, external engineering networks, landscaping. The total duration of the construction of a residential building, depending on the duration of each redistribution and the degree of their overlapping, can be determined by one of the proposed four options. At the same time, a unified approach to determining the overall duration of construction on the basis of the provisions of a streamlined construction organization with the testing of results on the example of high-rise residential buildings of the typical I-155B series was developed, and the coefficients for combining the work and the main redevelopment of the building were determined.

26 CFR 1.528-2 - Organized and operated to provide for the acquisition, construction, management, maintenance and...

Code of Federal Regulations, 2011 CFR

2011-04-01

... acquisition, construction, management, maintenance and care of association property. 1.528-2 Section 1.528-2... acquisition, construction, management, maintenance and care of association property. (a) Organized and... association are the acquisition, construction, management, maintenance, and care of association property. In...

26 CFR 1.528-2 - Organized and operated to provide for the acquisition, construction, management, maintenance and...

Code of Federal Regulations, 2013 CFR

2013-04-01

... acquisition, construction, management, maintenance and care of association property. 1.528-2 Section 1.528-2... acquisition, construction, management, maintenance and care of association property. (a) Organized and... association are the acquisition, construction, management, maintenance, and care of association property. In...

26 CFR 1.528-2 - Organized and operated to provide for the acquisition, construction, management, maintenance and...

Code of Federal Regulations, 2012 CFR

2012-04-01

... acquisition, construction, management, maintenance and care of association property. 1.528-2 Section 1.528-2... acquisition, construction, management, maintenance and care of association property. (a) Organized and... association are the acquisition, construction, management, maintenance, and care of association property. In...

26 CFR 1.528-2 - Organized and operated to provide for the acquisition, construction, management, maintenance and...

Code of Federal Regulations, 2014 CFR

2014-04-01

... acquisition, construction, management, maintenance and care of association property. 1.528-2 Section 1.528-2... acquisition, construction, management, maintenance and care of association property. (a) Organized and... association are the acquisition, construction, management, maintenance, and care of association property. In...

26 CFR 1.528-2 - Organized and operated to provide for the acquisition, construction, management, maintenance and...

Code of Federal Regulations, 2010 CFR

2010-04-01

... acquisition, construction, management, maintenance and care of association property. 1.528-2 Section 1.528-2... acquisition, construction, management, maintenance and care of association property. (a) Organized and... association are the acquisition, construction, management, maintenance, and care of association property. In...

Path forward: emerging issues and challenges.

PubMed

Gillen, Matt; Gittleman, Janie L

2010-06-01

The NIOSH Construction Program worked with industry stakeholders to develop a National Occupational Safety and Health Construction Agenda to target future research and activities. The Program and its partners are also cognizant that new developments can emerge over time and that research can play an important role in helping to understand and address these emerging issues. Examples of emerging issues relevant to construction safety and health are described. These include: (a) climate change and energy considerations; (b) green construction developments and opportunities; (c) new materials; (d) changes in industry structure and practice; (e) workforce developments and disparities; (f) injury underreporting and cost and risk shifting; and (g) increased interest in addressing root causes. Responding to emerging issues while maintaining a focus on fundamental longstanding issues represents an ongoing challenge for researchers and industry organizations. Additional research to understand the diffusion and adoption of research by the industry is also needed. Research accomplished to date provides a strong foundation for addressing future industry needs and trends. (c) 2010 Elsevier Ltd. All rights reserved.

B2B collaboration method through trust values for e-supply chain integrator: a case study of Malaysian construction industry

NASA Astrophysics Data System (ADS)

Ab. Aziz, Norshakirah; Ahmad, Rohiza; Dhanapal Durai, Dominic

2011-12-01

Limited trust, cooperation and communication have been identified as some of the issues that hinder collaboration among business partners. These one also true in the acceptance of e-supply chain integrator among organizations that involve in the same industry. On top of that, the huge number of components in supply chain industry also makes it impossible to include entire supply chain components in the integrator. Hence, this study intends to propose a method for identifying "trusted" collaborators for inclusion into an e-supply chain integrator. For the purpose of constructing and validating the method, the Malaysian construction industry is chosen as the case study due to its size and importance to the economy. This paper puts forward the background of the research, some relevant literatures which lead to trust values elements formulation, data collection from Malaysian Construction Supply Chain and a glimpse of the proposed method for trusted partner selection. Future work is also presented to highlight the next step of this research.

First steps towards a constructal Microbial Fuel Cell.

PubMed

Lepage, Guillaume; Perrier, Gérard; Ramousse, Julien; Merlin, Gérard

2014-06-01

In order to reach real operating conditions with consequent organic charge flow, a multi-channel reactor for Microbial Fuel Cells is designed. The feed-through double chamber reactor is a two-dimensional system with four parallel channels and Reticulated Vitreous Carbon as electrodes. Based on thermodynamical calculations, the constructal-inspired distributor is optimized with the aim to reduce entropy generation along the distributing path. In the case of negligible singular pressure drops, the Hess-Murray law links the lengths and the hydraulic diameters of the successive reducing ducts leading to one given working channel. The determination of generated entropy in the channels of our constructal MFC is based on the global hydraulic resistance caused by both regular and singular pressure drops. Polarization, power and Electrochemical Impedance Spectroscopy show the robustness and the efficiency of the cell, and therefore the potential of the constructal approach. Routes towards improvements are suggested in terms of design evolutions. Copyright © 2014 Elsevier Ltd. All rights reserved.

The Employer Perspective on Sustainable Employability in the Construction Industry.

PubMed

Tonnon, Susanne C; van der Veen, Rozan; Westerman, Marjan J; Robroek, Suzan J W; van der Ploeg, Hidde P; van der Beek, Allard J; Proper, Karin I

2017-01-01

To determine the measures employers in the construction industry take to promote sustainable employability, the barriers and facilitators that influence implementation and employer needs. Questionnaire among 499 employers and interviews with 17 employers. Employers expressed a need for alternative jobs for workers who can no longer perform physically demanding tasks, as well as means to stimulate proactive employee behavior. Measures frequently targeted the work environment (95%) and employee health (79%), less frequently personal development (63%) and organization (65%). Implementation was influenced by economic factors, rules and regulations, client demands, employee demands, company vision, company culture, and time/manpower/expertise. Implementation of measures aimed at reducing physical load and the promotion of personal development are needed.

Future Research Directions in the Positive Valence Systems: Measurement, Development, and Implications for Youth Unipolar Depression.

PubMed

Olino, Thomas M

2016-01-01

The Positive Valence Systems (PVS) have been introduced by the National Institute of Mental Health as a domain to help organize multiple constructs focusing on reward-seeking behaviors. However, the initial working model for this domain is strongly influenced by adult constructs and measures. Thus, the present review focuses on extending the PVS into a developmental context. Specifically, the review provides some hypotheses about the structure of the PVS, how PVS components may change throughout development, how family history of depression may influence PVS development, and potential means of intervening on PVS function to reduce onsets of depression. Future research needs in each of these areas are highlighted.

Raman Spectrometer for Surface Identification of Minerals and Organic Compounds on Silicate Planets and Small Solar-System Bodies

NASA Technical Reports Server (NTRS)

Haskin, Larry A.

2000-01-01

This summary is the final report of work on two-year grant. Our objectives for this project were (1) to demonstrate that Raman spectroscopy is an excellent method for determining mineralogy on the surface of the Moon, Mars, and other planetary bodies; (2) to construct a prototype of a small Raman spectrometer of the kind we suggest could be used on a lander or rover; and (3) to test the ability of that spectrometer to identify minerals and quantify mineral proportions in lunar materials and complex Martian analog materials, and to identify organic matter in planetary surface materials, all under roughly simulated field conditions. These goals have been met. The principal accomplishments of this PIDDP project have been the following: selection for flight; construction of a breadboard Raman probe; throughput confirmation of the breadboard Raman probe; selection of a laser; a breadboard spectrograph based on our PIDDP design; and overall result.

Fatal occupational injuries in the Malaysian construction sector–causes and accidental agents

NASA Astrophysics Data System (ADS)

Ayob, A.; Shaari, A. A.; Zaki, M. F. M.; Munaaim, M. A. C.

2018-04-01

The construction sector is associated with various accidents and fatal injuries. These occupational accidents are caused by numerous factors, such as lack of supervision; lack of adherence to safe work technique; failure to wear personal protective equipment; and failure to comply with the safe use of tools, vehicles, and machines. Using 2013–2016 secondary data from the Department of Occupational Safety and Health and Social Security Organization, this study conducted a descriptive exploration survey to identify common fatal occupational injuries associated with the Malaysian construction sector, as well as their causes and accidental agents. Results indicated that construction, followed by manufacturing, agriculture, forestry, logging, and fishery, are the riskiest job sectors in Malaysia. The highest incidences of occupational casualties were reported in Sarawak, Johor, and Selangor. These states accounted for approximately 13.33% to 18.18% of all cases of fatal occupational accidents. In these states, the lack of safety and health regulations and poor execution of risk management increased the risk of occupational accidents. Falls from heights accounted for 46.28% of fatal occupational injuries. Furthermore, being crushed by objects, materials, or vehicles accounted for 9.09% to 17.36% of fatal occupational injuries. Substandard work environment and transportation and lifting equipment, such as scaffolds, are primary accidental agents. Results of this study could enhance the knowledge and awareness of construction workers and management of job-related injuries to decrease the incidence of fatal occupational accidents.

A review on the occupational health and social security of unorganized workers in the construction industry.

PubMed

Tiwary, Guddi; Gangopadhyay, P K

2011-01-01

Construction is one of the important industries employing a large number of people on its workforce. A wide range of activities are involved in it. Due to the advent of industrialization and recent developments, this industry is taking a pivotal role for construction of buildings, roads, bridges, and so forth. The workers engaged in this industry are victims of different occupational disorders and psychosocial stresses. In India, they belong to the organized and unorganized sectors. However, data in respect to occupational health and psychosocial stress are scanty in our country. It is true that a sizable number of the workforce is from the unorganized sectors - the working hours are more than the stipulated hours of work - the work place is not proper - the working conditions are non-congenial in most of the cases and involve risk factors. Their wages are also not adequate, making it difficult for them to run their families. The hazards include handling of different materials required for construction, and exposure to harsh environmental conditions like sun, rain, and so on. On account of this, in adverse conditions, it results in accidents and adverse health conditions cause psychosocial strain and the like. They are victims of headache, backache, joint pains, skin diseases, lung disorders like silicosis, other muscular skeletal disorders, and so on. The repetitive nature of the work causes boredom and the disproportionate earning compared to the requirements puts them under psychological stress and strain and other abnormal behavioral disorders. The Government of India has realized the importance of this industry and has promulgated an Act in 1996. The state government are being asked to adhere to this, although only a few states have partially enforced it. In this article, attempts have been made to review some of the important available articles for giving a broad idea of the problem and for furtherance of research in this field.

A review on the occupational health and social security of unorganized workers in the construction industry

PubMed Central

Tiwary, Guddi; Gangopadhyay, P. K.

2011-01-01

Construction is one of the important industries employing a large number of people on its workforce. A wide range of activities are involved in it. Due to the advent of industrialization and recent developments, this industry is taking a pivotal role for construction of buildings, roads, bridges, and so forth. The workers engaged in this industry are victims of different occupational disorders and psychosocial stresses. In India, they belong to the organized and unorganized sectors. However, data in respect to occupational health and psychosocial stress are scanty in our country. It is true that a sizable number of the workforce is from the unorganized sectors — the working hours are more than the stipulated hours of work — the work place is not proper — the working conditions are non-congenial in most of the cases and involve risk factors. Their wages are also not adequate, making it difficult for them to run their families. The hazards include handling of different materials required for construction, and exposure to harsh environmental conditions like sun, rain, and so on. On account of this, in adverse conditions, it results in accidents and adverse health conditions cause psychosocial strain and the like. They are victims of headache, backache, joint pains, skin diseases, lung disorders like silicosis, other muscular skeletal disorders, and so on. The repetitive nature of the work causes boredom and the disproportionate earning compared to the requirements puts them under psychological stress and strain and other abnormal behavioral disorders. The Government of India has realized the importance of this industry and has promulgated an Act in 1996. The state government are being asked to adhere to this, although only a few states have partially enforced it. In this article, attempts have been made to review some of the important available articles for giving a broad idea of the problem and for furtherance of research in this field. PMID:21808496

Organizational injury rate underreporting: the moderating effect of organizational safety climate.

PubMed

Probst, Tahira M; Brubaker, Ty L; Barsotti, Anthony

2008-09-01

The goals of this study were (a) to assess the extent to which construction industry workplace injuries and illness are underreported, and (b) to determine whether safety climate predicts the extent of such underreporting. Data from 1,390 employees of 38 companies contracted to work at a large construction site in the northwestern United States were collected to assess the safety climate of the companies. Data from the Occupational Safety and Health Administration (OSHA) logs kept by the contractors allowed for calculation of each company's OSHA recordable injury rate (i.e., the reported injury rate), whereas medical claims data from an Owner-Controlled Insurance Program provided the actual experienced rate of injuries for those same companies. While the annual injury rate reported to OSHA was 3.11 injuries per 100 workers, the rate of eligible injuries that were not reported to OSHA was 10.90 injuries per 100 employees. Further, organizations with a poor safety climate had significantly higher rates of underreporting (81% of eligible injuries unreported) compared with organizations with a positive safety climate (47% of eligible injuries unreported). Implications for organizations and the accuracy of the Bureau of Labor Statistics's national occupational injury and illness surveillance system are discussed.

System Dynamics Model and Simulation of Employee Work-Family Conflict in the Construction Industry

PubMed Central

Wu, Guangdong; Duan, Kaifeng; Zuo, Jian; Yang, Jianlin; Wen, Shiping

2016-01-01

The construction industry is a demanding work environment where employees’ work-family conflict is particularly prominent. This conflict has a significant impact on job and family satisfaction and performance of employees. In order to analyze the dynamic evolution of construction industry employee’s work-family conflict between work and family domains, this paper constructs a bi-directional dynamic model framework of work-family conflict by referring to the relevant literature. Consequently, a system dynamics model of employee’s work-family conflict in the construction industry is established, and a simulation is conducted. The simulation results indicate that construction industry employees experience work interference with family conflict (WIFC) levels which are significantly greater than the family interference with work conflict (FIWC) levels. This study also revealed that improving work flexibility and organizational support can have a positive impact on the satisfaction and performance of construction industry employees from a work and family perspective. Furthermore, improving family support can only significantly improve employee job satisfaction. PMID:27801857

System Dynamics Model and Simulation of Employee Work-Family Conflict in the Construction Industry.

PubMed

Wu, Guangdong; Duan, Kaifeng; Zuo, Jian; Yang, Jianlin; Wen, Shiping

2016-10-28

The construction industry is a demanding work environment where employees' work-family conflict is particularly prominent. This conflict has a significant impact on job and family satisfaction and performance of employees. In order to analyze the dynamic evolution of construction industry employee's work-family conflict between work and family domains, this paper constructs a bi-directional dynamic model framework of work-family conflict by referring to the relevant literature. Consequently, a system dynamics model of employee's work-family conflict in the construction industry is established, and a simulation is conducted. The simulation results indicate that construction industry employees experience work interference with family conflict (WIFC) levels which are significantly greater than the family interference with work conflict (FIWC) levels. This study also revealed that improving work flexibility and organizational support can have a positive impact on the satisfaction and performance of construction industry employees from a work and family perspective. Furthermore, improving family support can only significantly improve employee job satisfaction.

25 CFR 900.122 - What does an Indian tribe or tribal organization do if it wants to secure a construction contract?

Code of Federal Regulations, 2010 CFR

2010-04-01

... UNDER THE INDIAN SELF-DETERMINATION AND EDUCATION ASSISTANCE ACT Construction § 900.122 What does an... information available about the construction project, including construction drawings, maps, engineering... tribal organization to review all plans, specifications, engineering reports, cost estimates, and other...

Experience in operating earth dams of the NIVA cascade of the Kola Regional Power administration constructed in 1930-1960

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nosova, O.N.; Margolina, O.G.; Sergeeva, N.S.

1995-08-01

This article discusses Russian experiences in monitoring earth-filled dams of the Niva region. These are low and medium head facilities in operation from 30 to 60 years. As shown by the experiences of long-term operation of earth structures in this area and on embankments being constructed by the method of dumping soil into water, it is necessary to impose more stringent requirements with respect to determining the steepness of these slopes to increase their stability, as is done when the structures are constructed dry. To organize successful monitoring of seepage processes in the investigated structures having substantial anisotropy of themore » soil, special recommendations of the disposition of piezometers under such specific conditions should be worked out. Recommendations on the disposition of piezometers under conditions of a noticeable effect of the groundwater regime of the surrounding territory on the seepage regime of the hydro development should be worked out accordingly. Since the calculations made in the work, as a result of which instability of many slopes was detected, are not always confirmed by practice, it is advisable to correct the method of such calculations with consideration of the characteristics of the formation of the seepage flow in the downstream shoulder of dams with pronounced anisotropy of the soil.« less

17 CFR 256.107 - Construction work in progress.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Construction work in progress... Construction work in progress. This account shall include the total of the balances of work orders for service company property in process of construction. Work orders shall be cleared from this account as soon as...

14 CFR 151.45 - Performance of construction work: General requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Performance of construction work: General... § 151.45 Performance of construction work: General requirements. (a) All construction work under a... work under a project until— (1) The sponsor has furnished three conformed copies of the contract to the...

A longitudinal study of aspects of a hospital's family-centred nursing: changing practice through data translation.

PubMed

White, Chris; Wilson, Valerie

2015-01-01

To examine how results and data from multiple Family Centred Nursing Index surveys help the development of family-centred nursing at organizational and ward levels. A critical analysis of survey data. The Family Centred Nursing Index provides a valid and reliable assessment of aspects of nursing, through a comprehensive survey of traditional indicators of practice development and a broader range of aspects of practice. A survey with 113 questions, each to be answered on 7-point Likert scale conducted six times in the last 7 years. Surveys have been in 2006, 2008, 2009, 2010, 2011/2012 and 2012/2013. All nurses employed by the organization can participate. These are reported as means across 19 constructs linked to five key domains and their significance is examined by year and (in the clinical settings) and compared against the organizational (whole population) averages. Ongoing survey and analysis of nurses' views of their work is providing a valuable source of developmental data. The results show unexpected associations between constructs e.g. - a high level of work stress does not correlate with a lower level of job satisfaction (and vice versa). A clear historical picture of many elements of developing family-centred care is emerging at both the organizational and individual-ward levels. This study provides insights into aspects of organizational and wards working environment for nurses and how these aspects of nurses' work interact in unexpected ways. It is appropriate for providing information to organizations and ward teams in relation to their development towards family-centred cultures. © 2014 Commonwealth of Australia. Journal of Advanced Nursing © 2014 John Wiley & Sons Ltd.

Additive Manufacturing of Biomedical Constructs with Biomimetic Structural Organizations

PubMed Central

Li, Xiao; He, Jiankang; Zhang, Weijie; Jiang, Nan; Li, Dichen

2016-01-01

Additive manufacturing (AM), sometimes called three-dimensional (3D) printing, has attracted a lot of research interest and is presenting unprecedented opportunities in biomedical fields, because this technology enables the fabrication of biomedical constructs with great freedom and in high precision. An important strategy in AM of biomedical constructs is to mimic the structural organizations of natural biological organisms. This can be done by directly depositing cells and biomaterials, depositing biomaterial structures before seeding cells, or fabricating molds before casting biomaterials and cells. This review organizes the research advances of AM-based biomimetic biomedical constructs into three major directions: 3D constructs that mimic tubular and branched networks of vasculatures; 3D constructs that contains gradient interfaces between different tissues; and 3D constructs that have different cells positioned to create multicellular systems. Other recent advances are also highlighted, regarding the applications of AM for organs-on-chips, AM-based micro/nanostructures, and functional nanomaterials. Under this theme, multiple aspects of AM including imaging/characterization, material selection, design, and printing techniques are discussed. The outlook at the end of this review points out several possible research directions for the future. PMID:28774030

Ghosts in the machine: publication planning in the medical sciences.

PubMed

Sismondo, Sergio

2009-04-01

Publication of pharmaceutical company-sponsored research in medical journals, and its presentation at conferences and meetings, is mostly governed by 'publication plans' that extract the maximum amount of scientific and commercial value out of data and analyses through carefully constructed and placed papers. Clinical research is typically performed by contract research organizations, analyzed by company statisticians, written up by independent medical writers, approved and edited by academic researchers who then serve as authors, and the whole process organized and shepherded through to journal publication by publication planners. This paper reports on a conference of an international association of publication planners. It describes and analyzes their work in an ecological framework that relates it to marketing departments of pharmaceutical companies, medical journals and publishers, academic authors, and potential audiences. The medical research described here forms a new kind of corporate science, designed to look like traditional academic work, but performed largely to market products.

The networked student: A design-based research case study of student constructed personal learning environments in a middle school science course

NASA Astrophysics Data System (ADS)

Drexler, Wendy

This design-based research case study applied a networked learning approach to a seventh grade science class at a public school in the southeastern United States. Students adapted emerging Web applications to construct personal learning environments for in-depth scientific inquiry of poisonous and venomous life forms. The personal learning environments constructed used Application Programming Interface (API) widgets to access, organize, and synthesize content from a number of educational Internet resources and social network connections. This study examined the nature of personal learning environments; the processes students go through during construction, and patterns that emerged. The project was documented from both an instructional and student-design perspective. Findings revealed that students applied the processes of: practicing digital responsibility; practicing digital literacy; organizing content; collaborating and socializing; and synthesizing and creating. These processes informed a model of the networked student that will serve as a framework for future instructional designs. A networked learning approach that incorporates these processes into future designs has implications for student learning, teacher roles, professional development, administrative policies, and delivery. This work is significant in that it shifts the focus from technology innovations based on tools to student empowerment based on the processes required to support learning. It affirms the need for greater attention to digital literacy and responsibility in K12 schools as well as consideration for those skills students will need to achieve success in the 21st century. The design-based research case study provides a set of design principles for teachers to follow when facilitating student construction of personal learning environments.

National Security Reform 2010: A Mid-Term Assessment

DTIC Science & Technology

2011-08-01

5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) U.S. Army War College,Strategic...Minuteman Me- morial Building in Washington, DC. In addition, our Bush School staff performed nu- merous tasks in planning and executing the confer...more clearly. Carafano conclud- ed by stating that the government should build an ef- fective construct for the whole of government, and the nation’s

USSR Report Military Affairs

DTIC Science & Technology

1986-03-13

affairs of the country at the conference was closely associated with an analysis of the work of the political body and party organizations and with a...informed the editors), the construction of a joint " giving the sewer the necessary operating features." And it be- came unserviceable not because of...is closely tied to periodic combat training of the troops and naval forces. The first stage commences with an Ail-Union lesson on the history of the

TRANSCOM-DLA: Roles and Responsibilities

DTIC Science & Technology

2017-11-01

Aviation Industrial Hardware Construction &  Equipment   36 Note: For the plot on the right, the underlying number of orders is likewise based on a...services to be provided by the fund, its management structure and how it will meet the following five criteria: 1. Defined organizational “outputs that... structure is working. o There would not be any efficiencies gained from reorganizing or consolidating the two organizations. o There are no functions

National Strategy of Defense: Peace and Security for Brazil

DTIC Science & Technology

2008-12-19

deployed in Southeast and South Brazil. The Navy fleet concentrates in the Rio de Janeiro city. Almost all of the Air Force technological premises are...expansion of the institutions that may democratize the market economy and deepen democracy, organizing a socially inclusive process of economic growth...in terms of scope and density of its means, to the Naval Base of Rio de Janeiro. 10. The Navy will speed up the construction work of its

Beyond the classroom: a case study of immigrant safety liaisons in residential construction.

PubMed

Ochsner, Michele; Marshall, Elizabeth G; Martino, Carmen; Pabelón, Marién Casillas; Kimmel, Louis; Rostran, Damaris

2012-01-01

Latino day laborers often work at dangerous construction sites with little power to change conditions. We describe the development, implementation, and early-stage results of a program to train immigrant day laborers as safety liaisons. These are construction workers prepared to recognize and respond to health and safety hazards. Based in Newark, NJ, the project involves collaboration between New Labor, a membership-based worker center, and university researchers and labor educators. Safety liaisons undergo training and receive ongoing support for their roles. Both qualitative and quantitative data are collected to monitor progress. Although lacking in formal authority, safety liaisons have prompted improvements at specific sites, filed OSHA complaints, and developed a local worker council. Participatory training methods, opportunities for leadership outside the classroom, and participation in project planning have strengthened liaisons' effectiveness, leadership skills, and commitment. The safety liaison approach could be adapted by worker centers and their partner organizations.

Team Leader Structuring for Team Effectiveness and Team Learning in Command-and-Control Teams.

PubMed

van der Haar, Selma; Koeslag-Kreunen, Mieke; Euwe, Eline; Segers, Mien

2017-04-01

Due to their crucial and highly consequential task, it is of utmost importance to understand the levers leading to effectiveness of multidisciplinary emergency management command-and-control (EMCC) teams. We argue that the formal EMCC team leader needs to initiate structure in the team meetings to support organizing the work as well as facilitate team learning, especially the team learning process of constructive conflict. In a sample of 17 EMCC teams performing a realistic EMCC exercise, including one or two team meetings (28 in sum), we coded the team leader's verbal structuring behaviors (1,704 events), rated constructive conflict by external experts, and rated team effectiveness by field experts. Results show that leaders of effective teams use structuring behaviors more often (except asking procedural questions) but decreasingly over time. They support constructive conflict by clarifying and by making summaries that conclude in a command or decision in a decreasing frequency over time.

LMX, Breach Perceptions, Work-Family Conflict, and Well-Being: A Mediational Model.

PubMed

Hill, Rachel T; Morganson, Valerie J; Matthews, Russell A; Atkinson, Theresa P

2016-01-01

Despite research advances, work-family scholars still lack an understanding of how leadership constructs relate to an employee's ability to effectively manage the work-family interface. In addition, there remains a need to examine the process through which leadership and work-family conflict influence well-being outcomes. Using a sample of 312 workers, a mediated process model grounded in social exchange theory is tested wherein the authors seek to explain how leaders shape employee perceptions, which, in turn, impact organizational fulfillment of expectations (i.e., psychological contract breach), work-family conflict, and well-being. A fully latent structural equation model was used to test study hypotheses, all of which were supported. Building on existing theory, findings suggest that the supervisor plays a critical role as a frontline representative for the organization and that work-family conflict is reduced and well-being enhanced through a process of social exchange between the supervisor and worker.

Employees' perception of organizational support: a qualitative investigation in the Indian information technology (IT) industry.

PubMed

Dhar, Rajib Lochan

2012-01-01

Organizational support relates to an organization's readiness to reward increased work effort and to meet socio-emotional needs. This study investigated the various constructs of employees' perceptions of organizational support in the Indian context, with specific reference to the information technology (IT) industry. Thirty six semi-structured interviews were conducted from three different organizations over a period of four months. The participants were employed as Project Managers, Team Leaders and Executives in these organizations operating in Pune and were selected via randomized quota sampling to reflect a mix of age, positions, genders and experience with organization. Qualitative methods were used in order to collect the data, through phenomenological principles. Discussion with the participants led to the emergence of five different themes which influence employees' perception of organizational support. These were: materialistic support, supervisor support, building reciprocal relationships, Organizational justice and intentions to leave. This study provided a tentative starting point towards the greater understanding of the employee's perceived notion of organizational support. Based on the study findings, there is an imperative that the human resource department and organizational forerunners continue to use research findings to support IT professionals in various ways in order to improve their quality of work life.

Interdisciplinary Interactions During R&D and Early Design of Large Engineered Systems

NASA Technical Reports Server (NTRS)

McGowan, Anna-Maria Rivas

2014-01-01

Designing Large-Scale Complex Engineered Systems (LaCES) such as aircraft and submarines requires the input of thousands of engineers and scientists whose work is proximate in neither time nor space. Comprehensive knowledge of the system is dispersed among specialists whose expertise is in typically one system component or discipline. This study examined the interactive work practices among such specialists seeking to improve engineering practice through a rigorous and theoretical understanding of current practice. This research explored current interdisciplinary practices and perspectives during R&D and early LaCES design and identified why these practices and perspectives prevail and persist. The research design consisted of a three-fold, integrative approach that combined an open-ended survey, semi-structured interviews, and ethnography. Significant empirical data from experienced engineers and scientists in a large engineering organization were obtained and integrated with theories from organization science and engineering. Qualitative analysis was used to obtain a holistic, contextualized understanding. The over-arching finding is that issues related to cognition, organization, and social interrelations mostly dominate interactions across disciplines. Engineering issues, such as the integration of hardware or physics-based models, are not as significant. For example, organization culture is an important underlying factor that guided researchers more toward individual sovereignty over cross-disciplinarity. The organization structure and the engineered system architecture also serve as constraints to the engineering work. Many differences in work practices were observed, including frequency and depth of interactions, definition or co-construction of requirements, clarity or creation of the system architecture, work group proximity, and cognitive challenges. Practitioners are often unaware of these differences resulting in confusion and incorrect assumptions regarding work expectations. Cognitively, the enactment and coconstruction of knowledge are the fundamental tasks of the interdisciplinary interactions. Distributed and collective cognition represent most of the efforts. Argument, ignorance, learning, and creativity are interrelated aspects of the interactions that cause discomfort but yield benefits such as problem mitigation, broader understanding, and improved system design and performance. The quality and quantity of social interrelations are central to all work across disciplines with reciprocity, respectful engagement, and heedful interrelations being significant to the effectiveness of the engineering and scientific work.

Distribution of Organic Carbon in the Sediments of Xinxue River and the Xinxue River Constructed Wetland, China.

PubMed

Cao, Qingqing; Wang, Renqing; Zhang, Haijie; Ge, Xiuli; Liu, Jian

2015-01-01

Wetland ecosystems are represented as a significant reservoir of organic carbon and play an important role in mitigating the greenhouse effect. In order to compare the compositions and distribution of organic carbon in constructed and natural river wetlands, sediments from the Xinxue River Constructed Wetland and the Xinxue River, China, were sampled at two depths (0-15 cm and 15-25 cm) in both upstream and downstream locations. Three types of organic carbon were determined: light fraction organic carbon, heavy fraction organic carbon, and dissolved organic carbon. The results show that variations in light fraction organic carbon are significantly larger between upstream and downstream locations than they are between the two wetland types; however, the opposite trend is observed for the dissolved organic carbon. There are no significant differences in the distribution of heavy fraction organic carbon between the discrete variables (e.g., between the two depths, the two locations, or the two wetland types). However, there are significant cross-variable differences; for example, the distribution patterns of heavy fraction organic carbon between wetland types and depths, and between wetland types and locations. Correlation analysis reveals that light fraction organic carbon is positively associated with light fraction nitrogen in both wetlands, while heavy fraction organic carbon is associated with both heavy fraction nitrogen and the moisture content in the constructed wetland. The results of this study demonstrate that the constructed wetland, which has a relatively low background value of heavy fraction organic carbon, is gradually accumulating organic carbon of different types, with the level of accumulation dependent on the balance between carbon accumulation and carbon decomposition. In contrast, the river wetland has relatively stable levels of organic carbon.

Distribution of Organic Carbon in the Sediments of Xinxue River and the Xinxue River Constructed Wetland, China

PubMed Central

Cao, Qingqing; Wang, Renqing; Zhang, Haijie; Ge, Xiuli; Liu, Jian

2015-01-01

Wetland ecosystems are represented as a significant reservoir of organic carbon and play an important role in mitigating the greenhouse effect. In order to compare the compositions and distribution of organic carbon in constructed and natural river wetlands, sediments from the Xinxue River Constructed Wetland and the Xinxue River, China, were sampled at two depths (0–15 cm and 15–25 cm) in both upstream and downstream locations. Three types of organic carbon were determined: light fraction organic carbon, heavy fraction organic carbon, and dissolved organic carbon. The results show that variations in light fraction organic carbon are significantly larger between upstream and downstream locations than they are between the two wetland types; however, the opposite trend is observed for the dissolved organic carbon. There are no significant differences in the distribution of heavy fraction organic carbon between the discrete variables (e.g., between the two depths, the two locations, or the two wetland types). However, there are significant cross-variable differences; for example, the distribution patterns of heavy fraction organic carbon between wetland types and depths, and between wetland types and locations. Correlation analysis reveals that light fraction organic carbon is positively associated with light fraction nitrogen in both wetlands, while heavy fraction organic carbon is associated with both heavy fraction nitrogen and the moisture content in the constructed wetland. The results of this study demonstrate that the constructed wetland, which has a relatively low background value of heavy fraction organic carbon, is gradually accumulating organic carbon of different types, with the level of accumulation dependent on the balance between carbon accumulation and carbon decomposition. In contrast, the river wetland has relatively stable levels of organic carbon. PMID:26230255

Practising family history: 'identity' as a category of social practice.

PubMed

Bottero, Wendy

2015-09-01

Research on family history argues it performs the task of anchoring a sense of 'self' through tracing ancestral connection and cultural belonging, seeing it as a form of storied 'identity-work'. This paper draws on a small-scale qualitative study to think further on the identity-work of family history. Using practice theory, and a disaggregated notion of 'identity', it explores how the storying of family histories relates to genealogy as a leisure hobby, a form of historical research, and an information-processing activity; and examines the social organization of that narrativity, where various practical engagements render certain kinds of genealogical information more, or less, 'storyable'. Key features of 'identity-work' in family history, such as the construction of genealogy as a personal journey of discovery and identification with particular ancestors, emerge as a consequence of the procedures of family history, organized as a set of practical tasks. The paper explores 'identity-work' as a consequence of people's engagement in specific social practices which provide an internal logic to their actions, with various components of 'identity' emerging as categories of practice shaped within, and for, use. Focusing on 'identity' as something produced when we are engaged in doing other things, the paper examines how the practical organization of 'doing other things' helps produce 'identity' in particular ways. © London School of Economics and Political Science 2015.

Solar discrepancies: Mars exploration and the curious problem of inter-planetary time

NASA Astrophysics Data System (ADS)

Mirmalek, Zara Lenora

The inter-planetary work system for the NASA's Mars Exploration Rovers (MER) mission entailed coordinating work between two corporally diverse workgroups, human beings and solar-powered robots, and between two planets with asynchronous axial rotations. The rotation of Mars takes approximately 24 hours and 40 minutes while for Earth the duration is 24 hours, a differential that was synchronized on Earth by setting a clock forward forty minutes every day. The hours of the day during which the solar-powered rovers were operational constituted the central consideration in the relationship between time and work around which the schedule of MER science operations were organized. And, the operational hours for the rovers were precarious for at least two reasons: on the one hand, the possibility of a sudden and inexplicable malfunction was always present; on the other, the rovers were powered by solar-charged batteries that could simply (and would eventually) fail. Thus, the timetable for the inter-planetary work system was scheduled according to the daily cycle of the sun on Mars and a version of clock time called Mars time was used to keep track of the movement of the sun on Mars. While the MER mission was a success, it does not necessarily follow that all aspects of mission operations were successful. One of the central problems that plagued the organization of mission operations was precisely this construct called "Mars time" even while it appeared that the use of Mars time was unproblematic and central to the success of the mission. In this dissertation, Zara Mirmalek looks at the construction of Mars time as a tool and as a social process. Of particular interest are the consequences of certain (ostensibly foundational) assumptions about the relationship between clock time and the conduct of work that contributed to making the relationship between Mars time and work on Earth appear operational. Drawing on specific examples of breakdowns of Mars time as a support technology and of the technologies supporting Mars time, Mirmalek explores some of the effects that follow from failing to recognize time as a socio-cultural construction that emerges, fundamentally, in and through a physical relationship between the environment and the human body. In this investigation of Mars time as a phenomenon comprised of several contradictory logics, Mirmalek takes into account several aspects of the social, technical, and cultural processes constituting the relationship between time and work at NASA and specifically on the MER mission.

Self-organized Anonymous Authentication in Mobile Ad Hoc Networks

NASA Astrophysics Data System (ADS)

Freudiger, Julien; Raya, Maxim; Hubaux, Jean-Pierre

Pervasive communications bring along new privacy challenges, fueled by the capability of mobile devices to communicate with, and thus “sniff on”, each other directly. We design a new mechanism that aims at achieving location privacy in these forthcoming mobile networks, whereby mobile nodes collect the pseudonyms of the nodes they encounter to generate their own privacy cloaks. Thus, privacy emerges from the mobile network and users gain control over the disclosure of their locations. We call this new paradigm self-organized location privacy. In this work, we focus on the problem of self-organized anonymous authentication that is a necessary prerequisite for location privacy. We investigate, using graph theory, the optimality of different cloak constructions and evaluate with simulations the achievable anonymity in various network topologies. We show that peer-to-peer wireless communications and mobility help in the establishment of self-organized anonymous authentication in mobile networks.

Elucidation of the structure-property relationship of p-type organic semiconductors through rapid library construction via a one-pot, Suzuki-Miyaura coupling reaction.

PubMed

Fuse, Shinichiro; Matsumura, Keisuke; Wakamiya, Atsushi; Masui, Hisashi; Tanaka, Hiroshi; Yoshikawa, Susumu; Takahashi, Takashi

2014-09-08

The elucidation of the structure-property relationship is an important issue in the development of organic electronics. Combinatorial synthesis and the evaluation of systematically modified compounds is a powerful tool in the work of elucidating structure-property relationships. In this manuscript, D-π-A structure, 32 p-type organic semiconductors were rapidly synthesized via a one-pot, Suzuki-Miyaura coupling with subsequent Knoevenagel condensation. Evaluation of the solubility and photovoltaic properties of the prepared compounds revealed that the measured solubility was strongly correlated with the solubility parameter (SP), as reported by Fedors. In addition, the SPs were correlated with the Jsc of thin-film organic solar cells prepared using synthesized compounds. Among the evaluated photovoltaic properties of the solar cells, Jsc and Voc had strong correlations with the photoconversion efficiency (PCE).

Reconstruction of structure and function in tissue engineering of solid organs: Toward simulation of natural development based on decellularization.

PubMed

Zheng, Chen-Xi; Sui, Bing-Dong; Hu, Cheng-Hu; Qiu, Xin-Yu; Zhao, Pan; Jin, Yan

2018-04-27

Failure of solid organs, such as the heart, liver, and kidney, remains a major cause of the world's mortality due to critical shortage of donor organs. Tissue engineering, which uses elements including cells, scaffolds, and growth factors to fabricate functional organs in vitro, is a promising strategy to mitigate the scarcity of transplantable organs. Within recent years, different construction strategies that guide the combination of tissue engineering elements have been applied in solid organ tissue engineering and have achieved much progress. Most attractively, construction strategy based on whole-organ decellularization has become a popular and promising approach, because the overall structure of extracellular matrix can be well preserved. However, despite the preservation of whole structure, the current constructs derived from decellularization-based strategy still perform partial functions of solid organs, due to several challenges, including preservation of functional extracellular matrix structure, implementation of functional recellularization, formation of functional vascular network, and realization of long-term functional integration. This review overviews the status quo of solid organ tissue engineering, including both advances and challenges. We have also put forward a few techniques with potential to solve the challenges, mainly focusing on decellularization-based construction strategy. We propose that the primary concept for constructing tissue-engineered solid organs is fabricating functional organs based on intact structure via simulating the natural development and regeneration processes. Copyright © 2018 John Wiley & Sons, Ltd.

Relationship of safety climate perceptions and job satisfaction among employees in the construction industry: the moderating role of age.

PubMed

Stoilkovska, Biljana Blaževska; Žileska Pančovska, Valentina; Mijoski, Goran

2015-01-01

This study examines the degree to which construction sector employees perceive that safety is important in their organizations/sites and how job satisfaction affects these perceptions when age is introduced as a moderator variable. Two-way analysis of variance demonstrated that job satisfaction has a strong effect on perceived management commitment to work safety and that this relationship was moderated by respondents' age. Job satisfaction was associated with perceived accident rate and safety inspection frequency, but the proposed role of age in this linkage was not confirmed. Consequently, the findings indicated that by increasing the level of job satisfaction, perceptions of these safety climate aspects proved to be more positive. The conclusion is that these relationships could further lead to a lower percentage of accidents and injuries in the workplace and better health among employees. A significant relationship between job satisfaction, age and perceived co-workers' commitment to work safety was not found.

Semiotic diversity in utterance production and the concept of 'language'.

PubMed

Kendon, Adam

2014-09-19

Sign language descriptions that use an analytic model borrowed from spoken language structural linguistics have proved to be not fully appropriate. Pictorial and action-like modes of expression are integral to how signed utterances are constructed and to how they work. However, observation shows that speakers likewise use kinesic and vocal expressions that are not accommodated by spoken language structural linguistic models, including pictorial and action-like modes of expression. These, also, are integral to how speaker utterances in face-to-face interaction are constructed and to how they work. Accordingly, the object of linguistic inquiry should be revised, so that it comprises not only an account of the formal abstract systems that utterances make use of, but also an account of how the semiotically diverse resources that all languaging individuals use are organized in relation to one another. Both language as an abstract system and languaging should be the concern of linguistics. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

Retaining nurses through conflict resolution. Training staff to confront problems and communicate openly can improve the work climate.

PubMed

Fowler, A R; Bushardt, S C; Jones, M A

1993-06-01

The way nurses resolve conflict may be leading them to quit their jobs or leave the profession altogether. Conflict is inevitable in a dynamic organization. What is important is not to avoid conflict but to seek its resolution in a constructive manner. Organizational conflict is typically resolved through one of five strategies: withdrawal, force, conciliation, compromise, or confrontation. A recent study of nurses in three different hospitals showed that the approach they use most is withdrawal. This might manifest itself in a request to change shifts or assignments and may lead to a job change and, eventually, abandonment of the field altogether. Given this scenario, changing nurses' conflict resolution style may help administrators combat the nursing shortage. Healthcare organizations must examine themselves to determine why nurses so frequently use withdrawal; then they must restructure work relationships as needed. Next, organizations need to increase nurses' awareness of the problem and train them to use a resolution style more conducive to building stable relationships: confrontation. Staff should also be trained in effective communications skills to develop trust and openness in their relationships.

Building health behavior models to guide the development of just-in-time adaptive interventions: A pragmatic framework

PubMed Central

Nahum-Shani, Inbal; Hekler, Eric B.; Spruijt-Metz, Donna

2016-01-01

Advances in wireless devices and mobile technology offer many opportunities for delivering just-in-time adaptive interventions (JITAIs)--suites of interventions that adapt over time to an individual’s changing status and circumstances with the goal to address the individual’s need for support, whenever this need arises. A major challenge confronting behavioral scientists aiming to develop a JITAI concerns the selection and integration of existing empirical, theoretical and practical evidence into a scientific model that can inform the construction of a JITAI and help identify scientific gaps. The purpose of this paper is to establish a pragmatic framework that can be used to organize existing evidence into a useful model for JITAI construction. This framework involves clarifying the conceptual purpose of a JITAI, namely the provision of just-in-time support via adaptation, as well as describing the components of a JITAI and articulating a list of concrete questions to guide the establishment of a useful model for JITAI construction. The proposed framework includes an organizing scheme for translating the relatively static scientific models underlying many health behavior interventions into a more dynamic model that better incorporates the element of time. This framework will help to guide the next generation of empirical work to support the creation of effective JITAIs. PMID:26651462

A Paradigm Shift in the Implementation of Ethics Codes in Construction Organizations in Hong Kong: Towards an Ethical Behaviour.

PubMed

Ho, Christabel Man-Fong; Oladinrin, Olugbenga Timo

2018-01-30

Due to the economic globalization which is characterized with business scandals, scholars and practitioners are increasingly engaged with the implementation of codes of ethics as a regulatory mechanism for stimulating ethical behaviours within an organization. The aim of this study is to examine various organizational practices regarding the effective implementation of codes of ethics within construction contracting companies. Views on ethics management in construction organizations together with the recommendations for improvement were gleaned through 19 semi-structured interviews, involving construction practitioners from various construction companies in Hong Kong. The findings suggested some practices for effective implementation of codes of ethics in order to diffuse ethical behaviours in an organizational setting which include; introduction of effective reward schemes, arrangement of ethics training for employees, and leadership responsiveness to reported wrongdoings. Since most of the construction companies in Hong Kong have codes of ethics, emphasis is made on the practical implementation of codes within the organizations. Hence, implications were drawn from the recommended measures to guide construction companies and policy makers.

Apollo Program Management, Kennedy Space Center, Florida. Volume 4

NASA Technical Reports Server (NTRS)

1968-01-01

The evolution of the Kennedy Space Center as the launch organization for Apollo/ Saturn V involved the concurrent solution of numerous complex problems. A significant increase in manpower was involved. Large and complex checkout and launch facilities were to be designed and constructed. Expansion of operational capabilities required the establishment and integration of a Government-Contractor operational team. From an initial cadre of approximately 200 civil service personnel of the Army Ballistic Missile Agency, transferred to NASA in 1960 following its establishment, expansion to the present civil service level of 2,900 occurred in the last seven years. Established within NASA as a directorate of the Marshall Space Flight Center, KSC achieved center status in 1962. With its designation as a Center, KSC accomplished the development and staffing of an organization that could perform procurement, resources, financial, and other management requirements formerly provided by the parent organization. In addition to continuing launch operations for established programs, KSC undertook the design and construction of large, new, and unique launch facilities for Apollo/Saturn V. With the expansion of the civil service work force, KSC integrated contractor organizations employing 23,000 personnel at the Center to perform specific operational and support missions under the technical supervision and observation of the Government team. The management techniques, organizational concepts, and continuing efforts utilized to meet the Apollo goals and challenges are discussed in this document.

Soil mixing design methods and construction techniques for use in high organic soils : [summary].

DOT National Transportation Integrated Search

2015-10-01

The soils which serve as foundations for construction projects may be roughly classified as : inorganic or organic. Inorganic soils vary in firmness and suitability for construction. Soft : or loose inorganic soils may be stabilized using cement or s...

14 CFR 151.47 - Performance of construction work: Letting of contracts.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Performance of construction work: Letting... Development Projects § 151.47 Performance of construction work: Letting of contracts. (a) Advertising required... project, each contract for construction work on a project in the amount of more than $2,000 must be...

14 CFR 151.47 - Performance of construction work: Letting of contracts.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Performance of construction work: Letting... Development Projects § 151.47 Performance of construction work: Letting of contracts. (a) Advertising required... project, each contract for construction work on a project in the amount of more than $2,000 must be...

14 CFR 151.47 - Performance of construction work: Letting of contracts.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Performance of construction work: Letting... Development Projects § 151.47 Performance of construction work: Letting of contracts. (a) Advertising required... project, each contract for construction work on a project in the amount of more than $2,000 must be...

14 CFR 151.47 - Performance of construction work: Letting of contracts.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Performance of construction work: Letting... Development Projects § 151.47 Performance of construction work: Letting of contracts. (a) Advertising required... project, each contract for construction work on a project in the amount of more than $2,000 must be...

Reversible logic gates based on enzyme-biocatalyzed reactions and realized in flow cells: a modular approach.

PubMed

Fratto, Brian E; Katz, Evgeny

2015-05-18

Reversible logic gates, such as the double Feynman gate, Toffoli gate and Peres gate, with 3-input/3-output channels are realized using reactions biocatalyzed with enzymes and performed in flow systems. The flow devices are constructed using a modular approach, where each flow cell is modified with one enzyme that biocatalyzes one chemical reaction. The multi-step processes mimicking the reversible logic gates are organized by combining the biocatalytic cells in different networks. This work emphasizes logical but not physical reversibility of the constructed systems. Their advantages and disadvantages are discussed and potential use in biosensing systems, rather than in computing devices, is suggested. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

From Coordination Cages to a Stable Crystalline Porous Hydrogen-Bonded Framework

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ju, Zhanfeng; Liu, Guoliang; Chen, Yu-Sheng

2017-03-20

A stable framework has been constructed through multiple charge-assisted H-bonds between cationic coordination cages and chloride ions. The framework maintained its original structure upon desolvation, which has been established by single-crystal structure analysis. This is the first fully characterized stable porous framework based on coordination cages after desolvation, with a moderately high Brunauer–Emmett–Teller (BET) surface area of 1201 m2 g-1. This work will not only give a light to construct stable porous frameworks based on coordination cages and thus broaden their applications, but will also provide a new avenue to the assembly of other porous materials such as porous organicmore » cages and hydrogen-bonded organic frameworks (HOFs) through non covalent bonds.« less

Investigating why and for whom management ethnic representativeness influences interpersonal mistreatment in the workplace.

PubMed

Lindsey, Alex P; Avery, Derek R; Dawson, Jeremy F; King, Eden B

2017-11-01

Preliminary research suggests that employees use the demographic makeup of their organization to make sense of diversity-related incidents at work. The authors build on this work by examining the impact of management ethnic representativeness-the degree to which the ethnic composition of managers in an organization mirrors or is misaligned with the ethnic composition of employees in that organization. To do so, they integrate signaling theory and a sense-making perspective into a relational demography framework to investigate why and for whom management ethnic representativeness may have an impact on interpersonal mistreatment at work. Specifically, in three complementary studies, the authors examine the relationship between management ethnic representativeness and interpersonal mistreatment. First, they analyze the relationship between management ethnic representativeness and perceptions of harassment, bullying, and abuse the next year, as moderated by individuals' ethnic similarity to others in their organizations in a sample of 60,602 employees of Britain's National Health Service. Second, a constructive replication investigates perceived behavioral integrity as an explanatory mechanism that can account for the effects of representativeness using data from a nationally representative survey of working adults in the United States. Third and finally, online survey data collected at two time points replicated these patterns and further integrated the effects of representativeness and dissimilarity when they are measured using both objective and subjective strategies. Results support the authors' proposed moderated mediation model in which management ethnic representation is negatively related to interpersonal mistreatment through the mediator of perceived behavioral integrity, with effects being stronger for ethnically dissimilar employees. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Volatile organic compounds concentrations during the construction process in newly-built timber-frame houses: source identification and emission kinetics.

PubMed

Plaisance, H; Vignau-Laulhere, J; Mocho, P; Sauvat, N; Raulin, K; Desauziers, V

2017-05-24

Building and furniture materials are known to be major sources of volatile organic compounds (VOCs) indoors. During the construction process, an introduced material can have a more or less long-term impact on the indoor air quality according to the building characteristics. In this study, field measurements were carried out at six construction stages in three energy-efficient timber-frame houses. Data analysis focused on the ten most abundant compounds found among an initial list of fifteen target VOCs, namely formaldehyde, acetaldehyde, hexanal, toluene, m/p-xylenes, ethylbenzene, styrene, α-pinene, 3-carene and d-limonene. The chemical compositions and concentration variation patterns were recorded. The results showed a high pollution count, with m/p-xylenes and ethylbenzene concentrations ranging from 1900 to 5100 μg m -3 occurring at the time of the structural work (representing more than 88% of the sum of the target VOCs). Emission tests done on a large number of materials used in the construction revealed that this pollution is due to the emissions from the polyurethane adhesive mastic used as a sealing material. The emission kinetics of polyurethane adhesive mastic was assessed alone and also within a material assembly reconstituting a room wall. The results showed that the superposition of materials led to a slowing down of the VOC emission process from polyurethane adhesive mastic, which explains the concentration decays recorded in houses during the construction process. At the final construction stage, the concentration levels were low for all compounds (the sums of the target VOCs were between 18 and 32 μg m -3 ), with the aldehydes (formaldehyde, acetaldehyde and hexanal) now becoming the major fraction in the chemical composition in the last stages of construction (representing 50-70% of the sum of the target VOCs). This is in agreement with the fact that the sources of aldehydes are the most numerous among the materials and have rather slow emission kinetics.

Development of an algorithm for controlling a multilevel three-phase converter

NASA Astrophysics Data System (ADS)

Taissariyeva, Kyrmyzy; Ilipbaeva, Lyazzat

2017-08-01

This work is devoted to the development of an algorithm for controlling transistors in a three-phase multilevel conversion system. The developed algorithm allows to organize a correct operation and describes the state of transistors at each moment of time when constructing a computer model of a three-phase multilevel converter. The developed algorithm of operation of transistors provides in-phase of a three-phase converter and obtaining a sinusoidal voltage curve at the converter output.

Monopoly of Force: The Nexus of DDR and SSR

DTIC Science & Technology

2011-01-01

PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES...subsectors form a matrix of the security sector, as seen in the accompanying table. Building subsector capacity and professionalizing actors can span...restriction of 18–28 naturally dis- qualified many. In building a new army from the ground up, the United States sought to construct a new culture for the

Corrosion and Coatings Review of Specifications and Drawings of Facilities for the Oman Military Construction Program at Masirah Island, Oman.

DTIC Science & Technology

1984-12-01

5 Background Objective Approach Scope of Work Organization 2 SUMMARY OF ENVIRONMENTAL CONDITIONS AT MASIRAH ISLAND ................. 7 Soil ...CONDITIONS AT MASIRAH ISLAND Soil Resistivity Values for the soil resistivity at this location are not readily avail- able. It is, however, considered...to be a very aggressive soil with high amounts of chlorides and sulfates, which can be converted to corrosive sul- -. fides. Soil samples will be

Robust Sensitivity Analysis for the Joint Improvised Explosive Device Defeat Organization (JIEDDO) Proposal Selection Model

DTIC Science & Technology

2009-03-01

making process (Skinner, 2001, 9). According to Clemen , before we can begin to apply any methodology to a specific decision problem, the analyst...it is possible to work with them to determine the values and objectives that relate to the decision in question ( Clemen , 2001, 21). Clemen ...value hierarchy is constructed, Clemen and Reilly suggest that a trade off is made between varying objectives. They introduce weights to determine

Health promoting leadership practices in four Norwegian industries.

PubMed

Skarholt, Kari; Blix, Elisabeth H; Sandsund, Mariann; Andersen, Thale K

2016-12-01

The aim of this article is to address health promoting leadership; what do leaders actually do to promote health at work? Leadership practice plays a crucial role in the workplace and greatly affects the working environment and working conditions. Through a theoretical and empirical approach, we seek to find characteristics/patterns of health promoting leadership. The definition of health promoting leadership is a democratic and supportive leadership style, where leaders seek to motivate and inspire their employees. The study in this article is based on qualitative research methods. We have investigated and compared leadership practice in four different organizations/industries in Norway: construction, oil and gas, health care and cleaning. These organizations and professions are quite different, and thus leadership must be understood and developed within its context. However, we found some generic characteristics of health promoting leadership: hands-on, accessible, supportive, inclusive and democratic. Current literature only rarely addresses how leadership affects health promotion at work. Consequently, more knowledge is needed about how leaders really succeed in creating healthy workplaces and healthy employees. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

A method to assess how interactive water simulation tools influence transdisciplinary decision-making processes in water management

NASA Astrophysics Data System (ADS)

Leskens, Johannes

2015-04-01

In modern water management, often transdisciplinary work sessions are organized in which various stakeholders participate to jointly define problems, choose measures and divide responsibilities to take actions. Involved stakeholders are for example policy analysts or decision-makers from municipalities, water boards or provinces, representatives of pressure groups and researchers from knowledge institutes. Parallel to this increasing attention for transdisciplinary work sessions, we see a growing availability of interactive IT-tools that can be applied during these sessions. For example, dynamic flood risk maps have become recently available that allow users during a work sessions to instantaneously assess the impact of storm surges or dam breaches, displayed on digital maps. Other examples are serious games, realistic visualizations and participatory simulations. However, the question is if and how these interactive IT-tools contribute to better decision-making. To assess this, we take the process of knowledge construction during a work session as a measure for the quality of decision-making. Knowledge construction can be defined as the process in which ideas, perspectives and opinions of different stakeholders, all having their own expertise and experience, are confronted with each other and new shared meanings towards water management issues are created. We present an assessment method to monitor the process of knowledge construction during work sessions in water management in which interactive IT tools are being used. The assessment method is based on a literature review, focusing on studies in which knowledge construction was monitored in other contexts that water management. To test the applicability of the assessment method, we applied it during a multi-stakeholder work session in Westland, located in the southwest of the Netherlands. The discussions during the work session were observed by camera. All statements, expressed by the various members of a stakeholder session, were classified according to our assessment method. We can draw the following preliminary conclusions. First, the case study showed that the method was useful to show the knowledge construction process over time, in terms of content and cognitive level of statements and interaction, attention and response between stakeholders. It was observed that the various aspects of knowledge construction all were influenced by the use of the 3Di model. The model focused discussions on technical issues of flood risk management, non-flood specialists were able to participate in discussions and in suggesting solutions and more topics could be evaluated in respect to non-interactive flood maps. Second, the method is considered useful as a benchmark for different interactive IT tools. The method is also considered useful to gain insight in how to optimally set-up multi-stakeholder meetings in which interactive IT-tools are being used. Further, the method can provide model developers insight in how to better meet the technical requirements of interactive IT tools to support the knowledge construction process during multi-stakeholder meeting

Production practices affecting worker task demands in concrete operations: A case study.

PubMed

Memarian, Babak; Mitropoulos, Panagiotis

2015-01-01

Construction work involves significant physical, mental, and temporal task demands. Excessive task demands can have negative consequences for safety, errors and production. This exploratory study investigates the magnitude and sources of task demands on a concrete operation, and examines the effect of the production practices on the workers' task demands. The NASA Task Load Index was used to measure the perceived task demands of two work crews. The operation involved the construction of a cast-in-place concrete building under high schedule pressures. Interviews with each crew member were used to identify the main sources of the perceived demands. Extensive field observations and interviews with the supervisors and crews identified the production practices. The workers perceived different level of task demands depending on their role. The production practices influenced the task demands in two ways: (1) practices related to work organization, task design, resource management, and crew management mitigated the task demands; and (2) other practices related to work planning and crew management increased the crew's ability to cope with and adapt to high task demands. The findings identify production practices that regulate the workers' task demands. The effect of task demands on performance is mitigated by the ability to cope with high demands.

Hybrid computational phantoms of the male and female newborn patient: NURBS-based whole-body models

NASA Astrophysics Data System (ADS)

Lee, Choonsik; Lodwick, Daniel; Hasenauer, Deanna; Williams, Jonathan L.; Lee, Choonik; Bolch, Wesley E.

2007-07-01

Anthropomorphic computational phantoms are computer models of the human body for use in the evaluation of dose distributions resulting from either internal or external radiation sources. Currently, two classes of computational phantoms have been developed and widely utilized for organ dose assessment: (1) stylized phantoms and (2) voxel phantoms which describe the human anatomy via mathematical surface equations or 3D voxel matrices, respectively. Although stylized phantoms based on mathematical equations can be very flexible in regard to making changes in organ position and geometrical shape, they are limited in their ability to fully capture the anatomic complexities of human internal anatomy. In turn, voxel phantoms have been developed through image-based segmentation and correspondingly provide much better anatomical realism in comparison to simpler stylized phantoms. However, they themselves are limited in defining organs presented in low contrast within either magnetic resonance or computed tomography images—the two major sources in voxel phantom construction. By definition, voxel phantoms are typically constructed via segmentation of transaxial images, and thus while fine anatomic features are seen in this viewing plane, slice-to-slice discontinuities become apparent in viewing the anatomy of voxel phantoms in the sagittal or coronal planes. This study introduces the concept of a hybrid computational newborn phantom that takes full advantage of the best features of both its stylized and voxel counterparts: flexibility in phantom alterations and anatomic realism. Non-uniform rational B-spline (NURBS) surfaces, a mathematical modeling tool traditionally applied to graphical animation studies, was adopted to replace the limited mathematical surface equations of stylized phantoms. A previously developed whole-body voxel phantom of the newborn female was utilized as a realistic anatomical framework for hybrid phantom construction. The construction of a hybrid phantom is performed in three steps: polygonization of the voxel phantom, organ modeling via NURBS surfaces and phantom voxelization. Two 3D graphic tools, 3D-DOCTOR™ and Rhinoceros™, were utilized to polygonize the newborn voxel phantom and generate NURBS surfaces, while an in-house MATLAB™ code was used to voxelize the resulting NURBS model into a final computational phantom ready for use in Monte Carlo radiation transport calculations. A total of 126 anatomical organ and tissue models, including 38 skeletal sites and 31 cartilage sites, were described within the hybrid phantom using either NURBS or polygon surfaces. A male hybrid newborn phantom was constructed following the development of the female phantom through the replacement of female-specific organs with male-specific organs. The outer body contour and internal anatomy of the NURBS-based phantoms were adjusted to match anthropometric and reference newborn data reported by the International Commission on Radiological Protection in their Publication 89. The voxelization process was designed to accurately convert NURBS models to a voxel phantom with minimum volumetric change. A sensitivity study was additionally performed to better understand how the meshing tolerance and voxel resolution would affect volumetric changes between the hybrid-NURBS and hybrid-voxel phantoms. The male and female hybrid-NURBS phantoms were constructed in a manner so that all internal organs approached their ICRP reference masses to within 1%, with the exception of the skin (-6.5% relative error) and brain (-15.4% relative error). Both hybrid-voxel phantoms were constructed with an isotropic voxel resolution of 0.663 mm—equivalent to the ICRP 89 reference thickness of the newborn skin (dermis and epidermis). Hybrid-NURBS phantoms used to create their voxel counterpart retain the non-uniform scalability of stylized phantoms, while maintaining the anatomic realism of segmented voxel phantoms with respect to organ shape, depth and inter-organ positioning. This work was supported by the National Cancer Institute.

Constructed Wetlands for Treatment of Organic and Engineered Nanomaterial Contaminants of Emerging Concerns (WaterRF Report 4334)

EPA Science Inventory

The goal of this project was to determine hydraulic and carbon loading rates for constructed wetlands required for achieving different levels of organic and nanomaterial contaminants of emerging concern (CECs) removal in constructed wetlands. Specific research objectives included...

Self-organized topology of recurrence-based complex networks

NASA Astrophysics Data System (ADS)

Yang, Hui; Liu, Gang

2013-12-01

With the rapid technological advancement, network is almost everywhere in our daily life. Network theory leads to a new way to investigate the dynamics of complex systems. As a result, many methods are proposed to construct a network from nonlinear time series, including the partition of state space, visibility graph, nearest neighbors, and recurrence approaches. However, most previous works focus on deriving the adjacency matrix to represent the complex network and extract new network-theoretic measures. Although the adjacency matrix provides connectivity information of nodes and edges, the network geometry can take variable forms. The research objective of this article is to develop a self-organizing approach to derive the steady geometric structure of a network from the adjacency matrix. We simulate the recurrence network as a physical system by treating the edges as springs and the nodes as electrically charged particles. Then, force-directed algorithms are developed to automatically organize the network geometry by minimizing the system energy. Further, a set of experiments were designed to investigate important factors (i.e., dynamical systems, network construction methods, force-model parameter, nonhomogeneous distribution) affecting this self-organizing process. Interestingly, experimental results show that the self-organized geometry recovers the attractor of a dynamical system that produced the adjacency matrix. This research addresses a question, i.e., "what is the self-organizing geometry of a recurrence network?" and provides a new way to reproduce the attractor or time series from the recurrence plot. As a result, novel network-theoretic measures (e.g., average path length and proximity ratio) can be achieved based on actual node-to-node distances in the self-organized network topology. The paper brings the physical models into the recurrence analysis and discloses the spatial geometry of recurrence networks.

Self-organized topology of recurrence-based complex networks.

PubMed

Yang, Hui; Liu, Gang

2013-12-01

With the rapid technological advancement, network is almost everywhere in our daily life. Network theory leads to a new way to investigate the dynamics of complex systems. As a result, many methods are proposed to construct a network from nonlinear time series, including the partition of state space, visibility graph, nearest neighbors, and recurrence approaches. However, most previous works focus on deriving the adjacency matrix to represent the complex network and extract new network-theoretic measures. Although the adjacency matrix provides connectivity information of nodes and edges, the network geometry can take variable forms. The research objective of this article is to develop a self-organizing approach to derive the steady geometric structure of a network from the adjacency matrix. We simulate the recurrence network as a physical system by treating the edges as springs and the nodes as electrically charged particles. Then, force-directed algorithms are developed to automatically organize the network geometry by minimizing the system energy. Further, a set of experiments were designed to investigate important factors (i.e., dynamical systems, network construction methods, force-model parameter, nonhomogeneous distribution) affecting this self-organizing process. Interestingly, experimental results show that the self-organized geometry recovers the attractor of a dynamical system that produced the adjacency matrix. This research addresses a question, i.e., "what is the self-organizing geometry of a recurrence network?" and provides a new way to reproduce the attractor or time series from the recurrence plot. As a result, novel network-theoretic measures (e.g., average path length and proximity ratio) can be achieved based on actual node-to-node distances in the self-organized network topology. The paper brings the physical models into the recurrence analysis and discloses the spatial geometry of recurrence networks.

Self-organized topology of recurrence-based complex networks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yang, Hui, E-mail: huiyang@usf.edu; Liu, Gang

With the rapid technological advancement, network is almost everywhere in our daily life. Network theory leads to a new way to investigate the dynamics of complex systems. As a result, many methods are proposed to construct a network from nonlinear time series, including the partition of state space, visibility graph, nearest neighbors, and recurrence approaches. However, most previous works focus on deriving the adjacency matrix to represent the complex network and extract new network-theoretic measures. Although the adjacency matrix provides connectivity information of nodes and edges, the network geometry can take variable forms. The research objective of this article ismore » to develop a self-organizing approach to derive the steady geometric structure of a network from the adjacency matrix. We simulate the recurrence network as a physical system by treating the edges as springs and the nodes as electrically charged particles. Then, force-directed algorithms are developed to automatically organize the network geometry by minimizing the system energy. Further, a set of experiments were designed to investigate important factors (i.e., dynamical systems, network construction methods, force-model parameter, nonhomogeneous distribution) affecting this self-organizing process. Interestingly, experimental results show that the self-organized geometry recovers the attractor of a dynamical system that produced the adjacency matrix. This research addresses a question, i.e., “what is the self-organizing geometry of a recurrence network?” and provides a new way to reproduce the attractor or time series from the recurrence plot. As a result, novel network-theoretic measures (e.g., average path length and proximity ratio) can be achieved based on actual node-to-node distances in the self-organized network topology. The paper brings the physical models into the recurrence analysis and discloses the spatial geometry of recurrence networks.« less

Niche construction drives social dependence in hermit crabs.

PubMed

Laidre, Mark E

2012-10-23

Organisms can receive not only a genetic inheritance from their ancestors but also an ecological inheritance, involving modifications their ancestors made to the environment through niche construction. Ecological inheritances may persist as a legacy, potentially generating selection pressures that favor sociality. Yet, most proposed cases of sociality being impacted by an ecological inheritance come from organisms that live among close kin and were highly social before their niche construction began. Here, I show that in terrestrial hermit crabs (Coenobita compressus)--organisms that do not live with kin and reside alone, each in its own shell--niche-construction drives social dependence, such that individuals can only survive in remodeled shells handed down from conspecifics. These results suggest that niche construction can be an important initiator of evolutionary pressures to socialize, even among unrelated and otherwise asocial organisms. Copyright © 2012 Elsevier Ltd. All rights reserved.

Final Report: Modifications and Optimization of the Organic Rankine Cycle to Improve the Recovery of Waste Heat

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guillen, Donna Post; Zia, Jalal

2013-09-01

This research and development (R&D) project exemplifies a shared public private commitment to advance the development of energy efficient industrial technologies that will reduce the U.S. dependence upon foreign oil, provide energy savings and reduce greenhouse gas emissions. The purpose of this project was to develop and demonstrate a Direct Evaporator for the Organic Rankine Cycle (ORC) for the conversion of waste heat from gas turbine exhaust to electricity. In conventional ORCs, the heat from the exhaust stream is transferred indirectly to a hydrocarbon based working fluid by means of an intermediate thermal oil loop. The Direct Evaporator accomplishes preheating,more » evaporation and superheating of the working fluid by a heat exchanger placed within the exhaust gas stream. Direct Evaporation is simpler and up to 15% less expensive than conventional ORCs, since the secondary oil loop and associated equipment can be eliminated. However, in the past, Direct Evaporation has been avoided due to technical challenges imposed by decomposition and flammability of the working fluid. The purpose of this project was to retire key risks and overcome the technical barriers to implementing an ORC with Direct Evaporation. R&D was conducted through a partnership between the Idaho National Laboratory (INL) and General Electric (GE) Global Research Center (GRC). The project consisted of four research tasks: (1) Detailed Design & Modeling of the ORC Direct Evaporator, (2) Design and Construction of Partial Prototype Direct Evaporator Test Facility, (3) Working Fluid Decomposition Chemical Analyses, and (4) Prototype Evaluation. Issues pertinent to the selection of an ORC working fluid, along with thermodynamic and design considerations of the direct evaporator, were identified. The FMEA (Failure modes and effects analysis) and HAZOP (Hazards and operability analysis) safety studies performed to mitigate risks are described, followed by a discussion of the flammability analysis of the direct evaporator. A testbed was constructed and the prototype demonstrated at the GE GRC Niskayuna facility.« less

Social workers and workplace bullying: perceptions, responses and implications.

PubMed

Whitaker, Tracy

2012-01-01

This non-experimental, cross-sectional study examined social workers' perceptions of bullying work relationships and their ability to construct effective coping responses to perceived workplace bullying. Quantitative data were gathered through the use of a mailed questionnaire, and qualitative data resulted from semi-structured individual interviews. The quantitative sample consisted of 111 social workers from the metropolitan, Washington, DC area, who were employed in organizations. Two self-identified targets of bullying participated in the interviews. Nearly three of five social workers (58%) in the sample reported being the targets of demeaning, rude, and hostile workplace interactions more than once in the previous year. Targets were more likely to work in government agencies/military and mental health outpatient organizations (19% and 18% respectively). More than a third of targets (35%) held a direct service role (clinical/direct practice), whereas almost a third (29%) identified their role as administration or management. The findings from this study suggest that workplace bullying may be a problem for social workers and that the social work profession may need to develop tools and guidelines to help practitioners identify, confront and extinguish these behaviors.

Epithelial Patterning, Morphogenesis, and Evolution: Drosophila Eggshell as a Model.

PubMed

Osterfield, Miriam; Berg, Celeste A; Shvartsman, Stanislav Y

2017-05-22

Understanding the mechanisms driving tissue and organ formation requires knowledge across scales. How do signaling pathways specify distinct tissue types? How does the patterning system control morphogenesis? How do these processes evolve? The Drosophila egg chamber, where EGF and BMP signaling intersect to specify unique cell types that construct epithelial tubes for specialized eggshell structures, has provided a tractable system to ask these questions. Work there has elucidated connections between scales of development, including across evolutionary scales, and fostered the development of quantitative modeling tools. These tools and general principles can be applied to the understanding of other developmental processes across organisms. Copyright © 2017 Elsevier Inc. All rights reserved.

Astronaut Exposures to Ionizing Radiation in a Lightly-Shielded Spacesuit

NASA Technical Reports Server (NTRS)

Wilson, J. W.; Simonsen, L. C.; Shinn, J. L.; Kim, M.-H. Y.; Cucinotta, F. A.; Badavi, F. F.; Atwell, W.

1999-01-01

The normal working and living areas of the astronauts are designed to provide an acceptable level of protection against the hazards of ionizing radiation of the space environment. Still there are occasions when they must don a spacesuit designed mainly for environmental control and mobility and leave the confines of their better-protected domain. This is especially true for deep space exploration. The impact of spacesuit construction on the exposure of critical astronaut organs will be examined in the ionizing radiation environments of free space, the lunar surface and the Martian surface. The computerized anatomical male model is used to evaluate astronaut self-shielding factors and to determine space radiation exposures to critical radiosensitive human organs.

Photorealistic virtual anatomy based on Chinese Visible Human data.

PubMed

Heng, P A; Zhang, S X; Xie, Y M; Wong, T T; Chui, Y P; Cheng, C Y

2006-04-01

Virtual reality based learning of human anatomy is feasible when a database of 3D organ models is available for the learner to explore, visualize, and dissect in virtual space interactively. In this article, we present our latest work on photorealistic virtual anatomy applications based on the Chinese Visible Human (CVH) data. We have focused on the development of state-of-the-art virtual environments that feature interactive photo-realistic visualization and dissection of virtual anatomical models constructed from ultra-high resolution CVH datasets. We also outline our latest progress in applying these highly accurate virtual and functional organ models to generate realistic look and feel to advanced surgical simulators. (c) 2006 Wiley-Liss, Inc.

Governing the quality and safety of healthcare: A conceptual framework.

PubMed

Brown, Alison; Dickinson, Helen; Kelaher, Margaret

2018-04-01

Recent research has advanced understanding of corporate governance of healthcare quality, highlighting the need for future empirical work to develop beyond a focus on board composition to a more detailed exploration of the internal workings of governance that influence board engagement and activities. This paper proposes a conceptual framework to guide empirical research examining the work of board and senior management in governing healthcare quality. To generate this framework, existing conceptual approaches and key constructs influencing effectiveness are identified in the governance literature. Commonalities between governance and team effectiveness literature are mapped and suggest a number of key constructs in the team effectiveness literature are applicable to, but not yet fully explored, within the governance literature. From these we develop a healthcare governance conceptual framework encompassing both literatures, that outlines input and mediating factors influencing governance. The mapping process highlights gaps in research related to board dynamics and external influences that require further investigation. Organizing the multiple complex factors that influence governance of healthcare quality in a conceptual framework brings a new perspective to structuring theory-led research and informing future policy initiatives. Copyright © 2018 Elsevier Ltd. All rights reserved.

The constructal law and the evolution of design in nature.

PubMed

Bejan, Adrian; Lorente, Sylvie

2011-10-01

The constructal law accounts for the universal phenomenon of generation and evolution of design (configuration, shape, structure, pattern, rhythm). This phenomenon is observed across the board, in animate, inanimate and human systems. The constructal law states the time direction of the evolutionary design phenomenon. It defines the concept of design evolution in physics. Along with the first and second law, the constructal law elevates thermodynamics to a science of systems with configuration. In this article we review the more recent work of our group, with emphasis on the advances made with the constructal law in the natural sciences. Highlighted are the oneness of animate and inanimate designs, the origin of finite-size organs on animals and vehicles, the flow of stresses as the generator of design in solid structures (skeletons, vegetation), the universality and rigidity of hierarchy in all flow systems, and the global design of human flows. Noteworthy is the tapestry of distributed energy systems, which balances nodes of production with networks of distribution on the landscape, and serves as key to energy sustainability and empowerment. At the global level, the constructal law accounts for the geography and design of human movement, wealth and communications. Copyright © 2011 Elsevier B.V. All rights reserved.

48 CFR 36.518 - Work oversight in cost-reimbursement construction contracts.

Code of Federal Regulations, 2010 CFR

2010-10-01

...-reimbursement construction contracts. 36.518 Section 36.518 Federal Acquisition Regulations System FEDERAL... Contract Clauses 36.518 Work oversight in cost-reimbursement construction contracts. The contracting officer shall insert the clause at 52.236-18, Work Oversight in Cost-Reimbursement Construction Contracts...

Fatal accidents in nighttime vs. daytime highway construction work zones.

PubMed

Arditi, David; Lee, Dong-Eun; Polat, Gul

2007-01-01

Awareness about worker safety in nighttime construction has been a major concern because it is believed that nighttime construction creates hazardous work conditions. However, only a few studies provide valuable comparative information about accident characteristics of nighttime and daytime highway construction activities. This study investigates fatal accidents that occurred in Illinois highway work zones in the period 1996-2001 in order to determine the safety differences between nighttime and daytime highway construction. The lighting and weather conditions were included into the study as control parameters to see their effects on the frequency of fatal accidents occurring in work zones. According to this study, there is evidence that nighttime construction is more hazardous than daytime construction. The inclusion of a weather parameter into the analysis has limited effect on this finding. The study justifies establishing an efficient work zone accident reporting system and taking all necessary measures to enhance safety in nighttime work zones.

Fibrin gels exhibit improved biological, structural, and mechanical properties compared with collagen gels in cell-based tendon tissue-engineered constructs.

PubMed

Breidenbach, Andrew P; Dyment, Nathaniel A; Lu, Yinhui; Rao, Marepalli; Shearn, Jason T; Rowe, David W; Kadler, Karl E; Butler, David L

2015-02-01

The prevalence of tendon and ligament injuries and inadequacies of current treatments is driving the need for alternative strategies such as tissue engineering. Fibrin and collagen biopolymers have been popular materials for creating tissue-engineered constructs (TECs), as they exhibit advantages of biocompatibility and flexibility in construct design. Unfortunately, a few studies have directly compared these materials for tendon and ligament applications. Therefore, this study aims at determining how collagen versus fibrin hydrogels affect the biological, structural, and mechanical properties of TECs during formation in vitro. Our findings show that tendon and ligament progenitor cells seeded in fibrin constructs exhibit improved tenogenic gene expression patterns compared with their collagen-based counterparts for approximately 14 days in culture. Fibrin-based constructs also exhibit improved cell-derived collagen alignment, increased linear modulus (2.2-fold greater) compared with collagen-based constructs. Cyclic tensile loading, which promotes the maturation of tendon constructs in a previous work, exhibits a material-dependent effect in this study. Fibrin constructs show trending reductions in mechanical, biological, and structural properties, whereas collagen constructs only show improved tenogenic expression in the presence of mechanical stimulation. These findings highlight that components of the mechanical stimulus (e.g., strain amplitude or time of initiation) need to be tailored to the material and cell type. Given the improvements in tenogenic expression, extracellular matrix organization, and material properties during static culture, in vitro findings presented here suggest that fibrin-based constructs may be a more suitable alternative to collagen-based constructs for tissue-engineered tendon/ligament repair.

Fibrin Gels Exhibit Improved Biological, Structural, and Mechanical Properties Compared with Collagen Gels in Cell-Based Tendon Tissue-Engineered Constructs

PubMed Central

Dyment, Nathaniel A.; Lu, Yinhui; Rao, Marepalli; Shearn, Jason T.; Rowe, David W.; Kadler, Karl E.; Butler, David L.

2015-01-01

The prevalence of tendon and ligament injuries and inadequacies of current treatments is driving the need for alternative strategies such as tissue engineering. Fibrin and collagen biopolymers have been popular materials for creating tissue-engineered constructs (TECs), as they exhibit advantages of biocompatibility and flexibility in construct design. Unfortunately, a few studies have directly compared these materials for tendon and ligament applications. Therefore, this study aims at determining how collagen versus fibrin hydrogels affect the biological, structural, and mechanical properties of TECs during formation in vitro. Our findings show that tendon and ligament progenitor cells seeded in fibrin constructs exhibit improved tenogenic gene expression patterns compared with their collagen-based counterparts for approximately 14 days in culture. Fibrin-based constructs also exhibit improved cell-derived collagen alignment, increased linear modulus (2.2-fold greater) compared with collagen-based constructs. Cyclic tensile loading, which promotes the maturation of tendon constructs in a previous work, exhibits a material-dependent effect in this study. Fibrin constructs show trending reductions in mechanical, biological, and structural properties, whereas collagen constructs only show improved tenogenic expression in the presence of mechanical stimulation. These findings highlight that components of the mechanical stimulus (e.g., strain amplitude or time of initiation) need to be tailored to the material and cell type. Given the improvements in tenogenic expression, extracellular matrix organization, and material properties during static culture, in vitro findings presented here suggest that fibrin-based constructs may be a more suitable alternative to collagen-based constructs for tissue-engineered tendon/ligament repair. PMID:25266738

Intention to purchase organic food among young consumers: Evidences from a developing nation.

PubMed

Yadav, Rambalak; Pathak, Govind Swaroop

2016-01-01

The present study attempts to investigate the consumer's intention to purchase organic food in the context of a developing nation (India) using the Theory of Planned Behavior (TPB). Further, the study has incorporated additional constructs (moral attitude, health consciousness and environmental concern) in the TPB and measured its appropriateness. Responses were collected from 220 young consumers adopting convenience sampling approach. Data were analyzed using Structural Equation Modeling (SEM) to evaluate the strength of relationship between the constructs. The findings reported that the TPB partially supported the organic food purchase intention. Among the additional constructs incorporated, moral attitude and health consciousness positively influenced the consumer's intention to purchase organic food. The study has supported the inclusion of new constructs in the TPB as it has improved the predictive power of the proposed framework in determining consumer's intention to purchase organic food. Copyright © 2015 Elsevier Ltd. All rights reserved.

Organization of Synthetic Alphoid DNA Array in Human Artificial Chromosome (HAC) with a Conditional Centromere

PubMed Central

Kouprina, Natalay; Samoshkin, Alexander; Erliandri, Indri; Nakano, Megumi; Lee, Hee-Sheung; Fu, Haiging; Iida, Yuichi; Aladjem, Mirit; Oshimura, Mitsuo; Masumoto, Hiroshi; Earnshaw, William C.; Larionov, Vladimir

2012-01-01

Human artificial chromosomes (HACs) represent a novel promising episomal system for functional genomics, gene therapy and synthetic biology. HACs are engineered from natural and synthetic alphoid DNA arrays upon transfection into human cells. The use of HACs for gene expression studies requires the knowledge of their structural organization. However, none of de novo HACs constructed so far has been physically mapped in detail. Recently we constructed a synthetic alphoidtetO-HAC that was successfully used for expression of full-length genes to correct genetic deficiencies in human cells. The HAC can be easily eliminated from cell populations by inactivation of its conditional kinetochore. This unique feature provides a control for phenotypic changes attributed to expression of HAC-encoded genes. This work describes organization of a megabase-size synthetic alphoid DNA array in the alphoidtetO-HAC that has been formed from a ~50 kb synthetic alphoidtetO-construct. Our analysis showed that this array represents a 1.1 Mb continuous sequence assembled from multiple copies of input DNA, a significant part of which was rearranged before assembling. The tandem and inverted alphoid DNA repeats in the HAC range in size from 25 to 150 kb. In addition, we demonstrated that the structure and functional domains of the HAC remains unchanged after several rounds of its transfer into different host cells. The knowledge of the alphoidtetO-HAC structure provides a tool to control HAC integrity during different manipulations. Our results also shed light on a mechanism for de novo HAC formation in human cells. PMID:23411994

[Work-related accidents in traditional fishermen from the Medium Araguaia River region, Tocantins, Brazil].

PubMed

Garrone Neto, Domingos; Cordeiro, Ricardo Carlos; Haddad, Vidal

2005-01-01

This is a cross-sectional study of work-related accidents among traditional fishermen in the Medium Araguaia River region of Tocantins, Brazil. From June to August 2002, fishermen from the Municipality of Araguacema were interviewed about the organization of their work activities and work-related accidents during the previous six months. Of the 92 participating fishermen, 56 reported having suffered a work-related accident (annual incidence was 82.6%). Some 95.7% of those interviewed did not regularly pay social security insurance as self-employed workers and were not aware of their social rights and duties. For fishermen reporting accidents, this proportion was 98.2%. Approximately 23.0% had another work activity, mainly as construction workers (47.6%) or sport-fishing guides (23.9%). Injuries inflicted by aquatic animals were the main form of accidents (about 86.0%). From these results, it is apparent that accidents from aquatic animals are an important health hazard, in some cases causing temporary work incapacity.

A development framework for distributed artificial intelligence

NASA Technical Reports Server (NTRS)

Adler, Richard M.; Cottman, Bruce H.

1989-01-01

The authors describe distributed artificial intelligence (DAI) applications in which multiple organizations of agents solve multiple domain problems. They then describe work in progress on a DAI system development environment, called SOCIAL, which consists of three primary language-based components. The Knowledge Object Language defines models of knowledge representation and reasoning. The metaCourier language supplies the underlying functionality for interprocess communication and control access across heterogeneous computing environments. The metaAgents language defines models for agent organization coordination, control, and resource management. Application agents and agent organizations will be constructed by combining metaAgents and metaCourier building blocks with task-specific functionality such as diagnostic or planning reasoning. This architecture hides implementation details of communications, control, and integration in distributed processing environments, enabling application developers to concentrate on the design and functionality of the intelligent agents and agent networks themselves.

Tunable chiral metal organic frameworks toward visible light–driven asymmetric catalysis

PubMed Central

Zhang, Yin; Guo, Jun; Shi, Lin; Zhu, Yanfei; Hou, Ke; Zheng, Yonglong; Tang, Zhiyong

2017-01-01

A simple and effective strategy is developed to realize visible light–driven heterogeneous asymmetric catalysis. A chiral organic molecule, which only has very weak catalytic activity in asymmetric α-alkylation of aldehydes under visible light, is utilized as the ligand to coordinate with different types of metal ions, including Zn2+, Zr4+, and Ti4+, for construction of crystalline metal organic frameworks (MOFs). Impressively, when used as heterogeneous catalysts, all of the synthesized MOFs exhibit markedly enhanced activity. Furthermore, the asymmetric catalytic performance of these MOFs could be easily altered by selecting different metal ions, owing to the tunable electron transfer property between metal ions and chiral ligands. This work will provide a new approach for fabrication of heterogeneous catalysts and trigger more enthusiasm to conduct the asymmetric catalysis driven by visible light. PMID:28835929

Characteristics of worker accidents on NYSDOT construction projects.

PubMed

Mohan, Satish; Zech, Wesley C

2005-01-01

This paper aims at providing cost-effective safety measures to protect construction workers in highway work zones, based on real data. Two types of accidents that occur in work zones were: (a) construction work area accidents, and (b) traffic accidents involving construction worker(s). A detailed analysis of work zone accidents involving 36 fatalities and 3,055 severe injuries to construction workers on New York State Department of Transportation (NYSDOT) construction projects from 1990 to 2001 established that five accident types: (a) Struck/Pinned by Large Equipment, (b) Trip or Fall (elevated), (c) Contact w/Electrical or Gas Utility, (d) Struck-by Moving/Falling Load, and (e) Crane/Lift Device Failure accounted for nearly 96% of the fatal accidents, nearly 63% of the hospital-level injury accidents, and nearly 91% of the total costs. These construction work area accidents had a total cost of $133.8 million. Traffic accidents that involve contractors' employees were also examined. Statistical analyses of the traffic accidents established that five traffic accident types: (a) Work Space Intrusion, (b) Worker Struck-by Vehicle Inside Work Space, (c) Flagger Struck-by Vehicle, (d) Worker Struck-by Vehicle Entering/Exiting Work Space, and (e) Construction Equipment Struck-by Vehicle Inside Work Space accounted for nearly 86% of the fatal, nearly 70% of the hospital-level injury and minor injury traffic accidents, and $45.4 million (79.4%) of the total traffic accident costs. The results of this paper provide real statistics on construction worker related accidents reported on construction work zones. Potential preventions based on real statistics have also been suggested. The ranking of accident types, both within the work area as well as in traffic, will guide the heavy highway contractor and owner agencies in identifying the most cost effective safety preventions.

Insights into nurses' work: Exploring relationships among work attitudes and work-related behaviors.

PubMed

Perreira, Tyrone; Berta, Whitney; Ginsburg, Liane; Barnsley, Jan; Herbert, Monique

2017-01-25

Work attitudes have been associated with work productivity. In health care, poor work attitudes have been linked to poor performance, decreased patient safety, and quality care. Hence, the importance, ascribed in the literature, of work that clearly identifies the relationships between and among work attitudes and work behaviors linked to performance. The purpose of this study is to better understand the relationships between work attitudes-perceived organizational justice, perceived organizational support (POS), affective commitment-consistently associated with a key type of performance outcome among nurses' organizational citizenship behaviors (OCBs). A survey was developed and administered to frontline nurses working in the province of Ontario, Canada. Data analysis used path analytic techniques. Direct associations were identified between interpersonal justice and POS, procedural justice and POS, and POS and affective commitment to both one's supervisor and one's co-workers. Affective commitment to patients and career was directly associated with OCBs. Affective commitment to one's co-worker was directly associated with OCBs directed toward individuals, as affective commitment to one's organization was with OCBs directed toward the organization. Finally, OCBIs and OCBs were directly associated. Examining the relationships of these constructs in a single model is novel and provides new information regarding their complexity. Findings suggest that prior approaches to studying these relationships may have been undernuanced, and conceptualizations may have led to somewhat inaccurate conclusions regarding their associations. With limited resources, knowledge of nurse work attitudes can inform human resource practices and operational policies involving training programs in employee communication, transparency, interaction, support, and performance evaluation.

7 CFR 1753.77 - Methods of minor construction.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., DEPARTMENT OF AGRICULTURE TELECOMMUNICATIONS SYSTEM CONSTRUCTION POLICIES AND PROCEDURES Minor Construction... Contract Form 773, “Miscellaneous Construction Work and Maintenance Services”, by RUS Contract Form 515, or by work order construction. The rules for using Form 515 for minor construction are contained in...

29 CFR 1910.12 - Construction work.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 5 2014-07-01 2014-07-01 false Construction work. 1910.12 Section 1910.12 Labor... Construction work. (a) Standards. The standards prescribed in part 1926 of this chapter are adopted as... provisions thereof, to every employment and place of employment of every employee engaged in construction...

The organizational context of children's mental health services.

PubMed

Glisson, Charles

2002-12-01

This paper reviews what is known about the organizational context of children's mental health services and describes organizational constructs, conceptual models, research methods, and intervention strategies that can be used to link organizational context to service quality and outcomes. Using evidence from studies of business and industrial organizations as well as studies of children's service organizations, the paper presents a model of organizational effectiveness that depends on several contextual characteristics that include organizational culture, structure, climate, and work attitudes. These characteristics are believed to affect the adoption of efficacious treatments (EBPs [evidence-based practices]), adherence to treatment protocols, therapeutic alliance, and the availability, responsiveness, and continuity of services. Finally, 10 components of the ARC(Availability Responsiveness and Continuity) organizational intervention are described as examples of strategies that can be used to develop organizational contexts with the prescribed characteristics. Mental health researchers are encouraged to consider including these constructs, conceptual models, research methods, and intervention strategies in dissemination, effectiveness, and implementation studies that address the gap between research-based knowledge about mental health treatment and what is actually offered in the community.

Fuel-Air Mixing and Combustion in Scramjets

NASA Technical Reports Server (NTRS)

Drummond, J. P.; Diskin, Glenn S.; Cutler, A. D.

2002-01-01

Activities in the area of scramjet fuel-air mixing and combustion associated with the Research and Technology Organization Working Group on Technologies for Propelled Hypersonic Flight are described. Work discussed in this paper has centered on the design of two basic experiments for studying the mixing and combustion of fuel and air in a scramjet. Simulations were conducted to aid in the design of these experiments. The experimental models were then constructed, and data were collected in the laboratory. Comparison of the data from a coaxial jet mixing experiment and a supersonic combustor experiment with a combustor code were then made and described. This work was conducted by NATO to validate combustion codes currently employed in scramjet design and to aid in the development of improved turbulence and combustion models employed by the codes.

48 CFR 22.402 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Construction 22.402 Applicability. (a) Contracts for construction work. (1) The requirements of this subpart apply— (i) Only if the construction work is, or reasonably can be foreseen to be, performed at a particular site so that wage rates can be determined for the locality, and only to construction work that is...

29 CFR 1910.12 - Construction work.

Code of Federal Regulations, 2010 CFR

2010-07-01

... already be included in paragraph (b) of this section, “construction work” includes the erection of new... 29 Labor 5 2010-07-01 2010-07-01 false Construction work. 1910.12 Section 1910.12 Labor... Construction work. (a) Standards. The standards prescribed in part 1926 of this chapter are adopted as...

U.S. Navy Capstone Strategies & Concepts (1970-2009) With Context & Insights for the U.S. Navy of 2009 & Beyond

DTIC Science & Technology

2009-02-01

AUTHOR(S) Swartz, Peter, M. 5d. PROJECT NUMBER R0148 5e. TASK NUMBER 4223 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND...government inter-agency partners • US industrial base & shipbuilding • Little on USMC • Just distribution list & USMC CV TACAIR bid 104 Project ...Administration: • USN build -up, including MSC fleet • Distrusted commercial shipbuilding subsidies • Ended construction -differential policy • Allowed

A History of the Mobile District: 1815 to 1971

DTIC Science & Technology

1975-01-01

Maria , Rachae l , and Thing . The s laves were to work on the construction of the fort at the directi on of the commanding offi cer of engi- nee rs...newspapers in Georgia and Alabama. FOREWORD The Mobile District is one of the oldest and also one of the most active districts in the Corps of...Sciences and Professor of History at Mobile College, to do the job on a contract basis. His diligence in searching out and organizing informa- tion

Navy LPD-17 Amphibious Ship Procurement: Background, Issues, and Options for Congress

DTIC Science & Technology

2008-11-21

PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e . TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES...optimal construction sequence and application of lessons learned for follow-on vessels in these programs. In the LPD 17 program, the Navy’s reliance on an...I am deeply concerned about Northrop Grumman Ship Systems’ ( NGSS ) ability to recover in the aftermath of Hurricane Katrina, particularly in regard to

Navy DD(X) and LCS Ship Acquisition Programs: Oversight Issues and Options for Congress

DTIC Science & Technology

2004-10-28

NUMBER 5e . TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Defense Acquisition University David D. Acker Library...program, it had decided to award the contract for the next phase on a sole-source basis to NGSS . The Navy has also stated that “The ship construction...contracts will be allocated equally between NGSS and BIW for the first six ships... and will be Cost Plus Incentive Fee (CPIF) type contracts.... The

Navy DD(X) and LCS Ship Acquisition Programs: Oversight Issues and Options for Congress

DTIC Science & Technology

2005-01-25

PROJECT NUMBER 5e . TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Congressional Research Service,The...the contract for the next phase on a sole-source basis to NGSS . The first DD(X) would be built by Northrop/Ingalls, while the second would be built...by GD/BIW. The Navy has also stated that “The ship construction contracts will be allocated equally between NGSS and BIW for the first six ships

[Alcoholism and the aesthetics of existence: Jack London and the white logic of John Barleycorn].

PubMed

Arantes, Marco Antonio

2015-12-01

Employing this theme as a guideline, this article examines how his prose amounts to self-practice in the construction of subjectivity and the organization of existence. It investigates how this work is related to the theme of self-care, analyzed by Michel Foucault in volumes 2 and 3 of the History of sexuality, as regards the aesthetics of existence and the art of living which existed in the Greco-Roman and Hellenistic worlds.

Application of DFT Filter Banks and Cosine Modulated Filter Banks in Filtering

NASA Technical Reports Server (NTRS)

Lin, Yuan-Pei; Vaidyanathan, P. P.

1994-01-01

None given. This is a proposal for a paper to be presented at APCCAS '94 in Taipei, Taiwan. (From outline): This work is organized as follows: Sec. II is devoted to the construction of the new 2m channel under-decimated DFT filter bank. Implementation and complexity of this DFT filter bank are discussed therein. IN a similar manner, the new 2m channel cosine modulated filter bank is discussed in Sec. III. Design examples are given in Sec. IV.

Court Depositions of Three Red Brigadists

DTIC Science & Technology

1986-02-01

decided on this meaning. He told us also that he had worked on chis plan for a long time; thus, Q , ýIIý Iý I W1 the embryo of the organization had...was the embryo of the future Prison Front. Naturally it was not indicated who these three were: Certainly as I understood later, there was Guagliardo...and the eventual network of support still had to be to constructed. This would provide that embryo of the Prison Front of which I have spoken and

Standardized Computer-based Organized Reporting of EEG: SCORE

PubMed Central

Beniczky, Sándor; Aurlien, Harald; Brøgger, Jan C; Fuglsang-Frederiksen, Anders; Martins-da-Silva, António; Trinka, Eugen; Visser, Gerhard; Rubboli, Guido; Hjalgrim, Helle; Stefan, Hermann; Rosén, Ingmar; Zarubova, Jana; Dobesberger, Judith; Alving, Jørgen; Andersen, Kjeld V; Fabricius, Martin; Atkins, Mary D; Neufeld, Miri; Plouin, Perrine; Marusic, Petr; Pressler, Ronit; Mameniskiene, Ruta; Hopfengärtner, Rüdiger; Emde Boas, Walter; Wolf, Peter

2013-01-01

The electroencephalography (EEG) signal has a high complexity, and the process of extracting clinically relevant features is achieved by visual analysis of the recordings. The interobserver agreement in EEG interpretation is only moderate. This is partly due to the method of reporting the findings in free-text format. The purpose of our endeavor was to create a computer-based system for EEG assessment and reporting, where the physicians would construct the reports by choosing from predefined elements for each relevant EEG feature, as well as the clinical phenomena (for video-EEG recordings). A working group of EEG experts took part in consensus workshops in Dianalund, Denmark, in 2010 and 2011. The faculty was approved by the Commission on European Affairs of the International League Against Epilepsy (ILAE). The working group produced a consensus proposal that went through a pan-European review process, organized by the European Chapter of the International Federation of Clinical Neurophysiology. The Standardised Computer-based Organised Reporting of EEG (SCORE) software was constructed based on the terms and features of the consensus statement and it was tested in the clinical practice. The main elements of SCORE are the following: personal data of the patient, referral data, recording conditions, modulators, background activity, drowsiness and sleep, interictal findings, “episodes” (clinical or subclinical events), physiologic patterns, patterns of uncertain significance, artifacts, polygraphic channels, and diagnostic significance. The following specific aspects of the neonatal EEGs are scored: alertness, temporal organization, and spatial organization. For each EEG finding, relevant features are scored using predefined terms. Definitions are provided for all EEG terms and features. SCORE can potentially improve the quality of EEG assessment and reporting; it will help incorporate the results of computer-assisted analysis into the report, it will make possible the build-up of a multinational database, and it will help in training young neurophysiologists. PMID:23506075

Developing nurse and physician questionnaires to assess primary work areas in intensive care units.

PubMed

Rashid, Mahbub; Boyle, Diane K; Crosser, Michael

2014-01-01

The objective of the study was to develop instruments for describing and assessing some aspects of design of the primary work areas of nurses and physicians in intensive care units (ICUs). Separate questionnaires for ICU physicians and nurses were developed. Items related to individual- and unit-level design features of the primary work areas of nurses and physicians were organized using constructs found in the literature. Items related to staff satisfaction and staff use of time in relation to primary work area design were also included. All items and constructs were reviewed by experts for content validity and were modified as needed before use. The final questionnaires were administered to a convenience sample of 4 ICUs in 2 large urban hospitals. A total of 55 nurses and 29 physicians completed the survey. The Cronbach α was used to measure internal consistency, and factor analysis was used to provide construct-related validity. Convergent and discriminant validity were assessed through examining bivariate correlations between relevant scales/items. Analysis of variance was used to identify whether the between-group member responses were significant among the 4 units. The Cronbach α values for all except 3 preliminary scales indicated acceptable reliability. Factor analysis indicated that some preliminary scales could be partitioned into subscales for finer descriptions of the primary work areas. Correlational analysis provided strong evidence of convergent and discriminant validity of all the scales and subscales. The significance level of F-statistics showed that the units were significantly different from each other, providing evidence of more between-unit variance than within-unit variance. Therefore, the questionnaires developed in the study offer a promising departure point for rigorous description and evaluation of the primary work areas in relation to staff satisfaction and use of time in ICUs at a time when the importance of such studies is growing.

Evolution of the Lunar Receiving Laboratory to the Astromaterial Sample Curation Facility: Technical Tensions Between Containment and Cleanliness, Between Particulate and Organic Cleanliness

NASA Technical Reports Server (NTRS)

Allton, J. H.; Zeigler, R. A.; Calaway, M. J.

2016-01-01

The Lunar Receiving Laboratory (LRL) was planned and constructed in the 1960s to support the Apollo program in the context of landing on the Moon and safely returning humans. The enduring science return from that effort is a result of careful curation of planetary materials. Technical decisions for the first facility included sample handling environment (vacuum vs inert gas), and instruments for making basic sample assessment, but the most difficult decision, and most visible, was stringent biosafety vs ultra-clean sample handling. Biosafety required handling of samples in negative pressure gloveboxes and rooms for containment and use of sterilizing protocols and animal/plant models for hazard assessment. Ultra-clean sample handling worked best in positive pressure nitrogen environment gloveboxes in positive pressure rooms, using cleanable tools of tightly controlled composition. The requirements for these two objectives were so different, that the solution was to design and build a new facility for specific purpose of preserving the scientific integrity of the samples. The resulting Lunar Curatorial Facility was designed and constructed, from 1972-1979, with advice and oversight by a very active committee comprised of lunar sample scientists. The high precision analyses required for planetary science are enabled by stringent contamination control of trace elements in the materials and protocols of construction (e.g., trace element screening for paint and flooring materials) and the equipment used in sample handling and storage. As other astromaterials, especially small particles and atoms, were added to the collections curated, the technical tension between particulate cleanliness and organic cleanliness was addressed in more detail. Techniques for minimizing particulate contamination in sample handling environments use high efficiency air filtering techniques typically requiring organic sealants which offgas. Protocols for reducing adventitious carbon on sample handling surfaces often generate particles. Further work is needed to achieve both minimal particulate and adventitious carbon contamination. This paper will discuss these facility topics and others in the historical context of nearly 50 years' curation experience for lunar rocks and regolith, meteorites, cosmic dust, comet particles, solar wind atoms, and asteroid particles at Johnson Space Center.

Learning organizations, internal marketing, and organizational commitment in hospitals.

PubMed

Tsai, Yafang

2014-04-04

Knowledge capital is becoming more important to healthcare establishments, especially for hospitals that are facing changing societal and industrial patterns. Hospital staff must engage in a process of continual learning to improve their healthcare skills and provide a superior service to their patients. Internal marketing helps hospital administrators to improve the quality of service provided by nursing staff to their patients and allows hospitals to build a learning culture and enhance the organizational commitment of its nursing staff. Our empirical study provides nursing managers with a tool to allow them to initiate a change in the attitudes of nurses towards work, by constructing a new 'learning organization' and using effective internal marketing. A cross-sectional design was employed. Two hundred questionnaires were distributed to nurses working in either a medical centre or a regional hospital in Taichung City, Taiwan, and 114 valid questionnaires were returned (response rate: 57%). The entire process of distribution and returns was completed between 1 October and 31 October 2009. Hypothesis testing was conducted using structural equation modelling. A significant positive correlation was found between the existence of a 'learning organization', internal marketing, and organizational commitment. Internal marketing was a mediator between creating a learning organization and organizational commitment. Nursing managers may be able to apply the creation of a learning organization to strategies that can strengthen employee organizational commitment. Further, when promoting the creation of a learning organization, managers can coordinate their internal marketing practices to enhance the organizational commitment of nurses.

Informational Closed-Loop Coding-Decoding Control Concept as the Base of the Living or Organized Systems Theory

NASA Astrophysics Data System (ADS)

Kirvelis, Dobilas; Beitas, Kastytis

2008-10-01

The aim of this work is to show that the essence of life and living systems is their organization as bioinformational technology on the base of informational anticipatory control. Principal paradigmatic and structural schemes of functional organization of life (organisms and their systems) are constructed on the basis of systemic analysis and synthesis of main phenomenological features of living world. Life is based on functional elements that implement engineering procedures of closed-loop coding-decoding control (CL-CDC). Phenomenon of natural bioinformational control appeared and developed on the Earth 3-4 bln years ago, when the life originated as a result of chemical and later biological evolution. Informatics paradigm considers the physical and chemical transformations of energy and matter in organized systems as flows that are controlled and the signals as means for purposive informational control programs. The social and technical technological systems as informational control systems are a latter phenomenon engineered by man. The information emerges in organized systems as a necessary component of control technology. Generalized schemes of functional organization on levels of cell, organism and brain neocortex, as the highest biosystem with CL-CDC, are presented. CL-CDC concept expands the understanding of bioinformatics.

Evaluating the Impacts of Health, Social Network and Capital on Craft Efficiency and Productivity: A Case Study of Construction Workers in China

PubMed Central

Yi, Wen; Miao, Mengyi; Zhang, Lei

2018-01-01

The construction industry has been recognized, for many years, as among those having a high likelihood of accidents, injuries and occupational illnesses. Such risks of construction workers can lead to low productivity and social problems. As a result, construction workers’ well-being should be highly addressed to improve construction workers’ efficiency and productivity. Meanwhile, the social support from a social network and capital (SNC) of construction workers has been considered as an effective approach to promote construction workers’ physical and mental health (P&M health), as well as their work efficiency and productivity. Based on a comprehensive literature review, a conceptual model, which aims to improve construction workers’ efficiency and productivity from the perspective of health and SNC, was proposed. A questionnaire survey was conducted to investigate the construction workers’ health, SNC and work efficiency and productivity in Nanjing, China. A structural equation model (SEM) was employed to test the three hypothetical relationships among construction workers’ P&M health, SNC and work efficiency and productivity. The results indicated that the direct impacts from construction workers’ P&M health on work efficiency and productivity were more significant than that from the SNC. In addition, the construction workers’ social capital and the network can indirectly influence the work efficiency and productivity by affecting the construction workers’ P&M health. Therefore, strategies for enhancing construction workers’ efficiency and productivity were proposed. Furthermore, many useable suggestions can be drawn from the research findings from the perspective of a government. The identified indicators and relationships would contribute to the construction work efficiency and productivity assessment and health management from the perspective of the construction workers. PMID:29462861

Evaluating the Impacts of Health, Social Network and Capital on Craft Efficiency and Productivity: A Case Study of Construction Workers in China.

PubMed

Yuan, Jingfeng; Yi, Wen; Miao, Mengyi; Zhang, Lei

2018-02-15

The construction industry has been recognized, for many years, as among those having a high likelihood of accidents, injuries and occupational illnesses. Such risks of construction workers can lead to low productivity and social problems. As a result, construction workers' well-being should be highly addressed to improve construction workers' efficiency and productivity. Meanwhile, the social support from a social network and capital (SNC) of construction workers has been considered as an effective approach to promote construction workers' physical and mental health (P&M health), as well as their work efficiency and productivity. Based on a comprehensive literature review, a conceptual model, which aims to improve construction workers' efficiency and productivity from the perspective of health and SNC, was proposed. A questionnaire survey was conducted to investigate the construction workers' health, SNC and work efficiency and productivity in Nanjing, China. A structural equation model (SEM) was employed to test the three hypothetical relationships among construction workers' P&M health, SNC and work efficiency and productivity. The results indicated that the direct impacts from construction workers' P&M health on work efficiency and productivity were more significant than that from the SNC. In addition, the construction workers' social capital and the network can indirectly influence the work efficiency and productivity by affecting the construction workers' P&M health. Therefore, strategies for enhancing construction workers' efficiency and productivity were proposed. Furthermore, many useable suggestions can be drawn from the research findings from the perspective of a government. The identified indicators and relationships would contribute to the construction work efficiency and productivity assessment and health management from the perspective of the construction workers.

Reliability of the AMA Guides to the Evaluation of Permanent Impairment.

PubMed

Forst, Linda; Friedman, Lee; Chukwu, Abraham

2010-12-01

AMA's Guides to the Evaluation of Permanent Impairment is used to rate loss of function and determine compensation and ability to work after injury or illness; however, there are few studies that evaluate reliability or construct validity. To evaluate the reliability of the fifth and sixth editions for back injury; to determine best methods for further study. Intra-class correlation coefficients within and between raters were relatively high. There was wider variability for individual cases. Impairment ratings were lower and correlated less well for the sixth edition, though confidence intervals overlapped. The sixth edition may not be an improvement over the fifth. A research agenda should include investigations of reliability and construct validity for different body sites and organ systems along the entire rating scale and among different categories of raters.

High-definition polymeric membranes: construction of 3D lithographed channel arrays through control of natural building blocks dynamics.

PubMed

Speranza, Valentina; Trotta, Francesco; Drioli, Enrico; Gugliuzza, Annarosa

2010-02-01

The fabrication of well-defined interfaces is in high demand in many fields of biotechnologies. Here, high-definition membrane-like arrays are developed through the self-assembly of water droplets, which work as natural building blocks for the construction of ordered channels. Solution viscosity together with the dynamics of the water droplets can decide the final formation of three-dimensional well-ordered patterns resembling anodic structures, especially because solvents denser than water are used. Particularly, the polymer solution viscosity is demonstrated to be a powerful tool for control of the mobility of submerged droplets during the microfabrication process. The polymeric patterns are structured at very high levels of organization and exhibit well-established transport-surface property relationships, considered basics for any types of advanced biotechnologies.

Measuring Work Functioning: Validity of a Weighted Composite Work Functioning Approach.

PubMed

Boezeman, Edwin J; Sluiter, Judith K; Nieuwenhuijsen, Karen

2015-09-01

To examine the construct validity of a weighted composite work functioning measurement approach. Workers (health-impaired/healthy) (n = 117) completed a composite measure survey that recorded four central work functioning aspects with existing scales: capacity to work, quality of work performance, quantity of work, and recovery from work. Previous derived weights reflecting the relative importance of these aspects of work functioning were used to calculate the composite weighted work functioning score of the workers. Work role functioning, productivity, and quality of life were used for validation. Correlations were calculated and norms applied to examine convergent and divergent construct validity. A t test was conducted and a norm applied to examine discriminative construct validity. Overall the weighted composite work functioning measure demonstrated construct validity. As predicted, the weighted composite score correlated (p < .001) strongly (r > .60) with work role functioning and productivity (convergent construct validity), and moderately (.30 < r < .60) with physical quality of life and less strongly than work role functioning and productivity with mental quality of life (divergent validity). Further, the weighted composite measure detected that health-impaired workers show with a large effect size (Cohen's d > .80) significantly worse work functioning than healthy workers (discriminative validity). The weighted composite work functioning measurement approach takes into account the relative importance of the different work functioning aspects and demonstrated good convergent, fair divergent, and good discriminative construct validity.

Management and integration of engineering and construction activities: Lessons learned from the AP1000{sup R} nuclear power plant China project

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCullough, M. C.; Ebeling-Koning, D.; Evans, M. C.

2012-07-01

The lessons learned during the early phase of design engineering and construction activities for the AP1000 China Project can be applied to any project involving multiple disciplines and multiple organizations. Implementation of a first-of-a-kind design to directly support construction activities utilizing resources assigned to design development and design delivery creates challenges with prioritization of activities, successful closure of issues, and communication between site organizations and the home office. To ensure successful implementation, teams were assigned and developed to directly support construction activities including prioritization of activities, site communication and ensuring closure of site emergent issues. By developing these teams, themore » organization is better suited to meet the demands of the construction schedule while continuing with design evolution of a standard plant and engineering delivery for multiple projects. For a successful project, proper resource utilization and prioritization are key for overcoming obstacles and ensuring success of the engineering organization. (authors)« less

Relationships among employees' working conditions, mental health, and intention to leave in nursing homes.

PubMed

Zhang, Yuan; Punnett, Laura; Gore, Rebecca

2014-02-01

Employee turnover is a large and expensive problem in the long-term care environment. Stated intention to leave is a reliable indicator of likely turnover, but actual predictors, especially for nursing assistants, have been incompletely investigated. This quantitative study identifies the relationships among employees' working conditions, mental health, and intention to leave. Self-administered questionnaires were collected with 1,589 employees in 18 for-profit nursing homes. A working condition index for the number of beneficial job features was constructed. Poisson regression modeling found that employees who reported four positive features were 77% less likely to state strong intention to leave (PR = 0.23, p < .001). The strength of relationship between working conditions and intention to leave was slightly mediated by employee mental health. Effective workplace intervention programs must address work organization features to reduce employee intention to leave. Healthy workplaces should build better interpersonal relationships, show respect for employee work, and involve employees in decision-making processes.

Resilience and work-life balance in first-line nurse manager.

PubMed

Kim, Miyoung; Windsor, Carol

2015-03-01

The aim of this study was to explore how first-line nurse managers constructed the meaning of resilience and its relationship to work-life balance for nurses in Korea. Participants were 20 first-line nurse managers working in six university hospitals. Data were collected through in-depth interviews from December 2011 to August 2012, and analyzed using Strauss and Corbin's grounded theory method. Analysis revealed that participants perceived work-life balance and resilience to be shaped by dynamic, reflective processes. The features consisting resilience included "positive thinking", "flexibility", "assuming responsibility", and "separating work and life". This perception of resilience has the potential to facilitate a shift in focus from negative to positive experiences, from rigidity to flexibility, from task-centered to person-centered thinking, and from the organization to life. Recognizing the importance of work-life balance in producing and sustaining resilience in first-line nurse managers could increase retention in the Korean nursing workforce. Copyright © 2015. Published by Elsevier B.V.

A framework and a measurement instrument for sustainability of work practices in long-term care

PubMed Central

2011-01-01

Background In health care, many organizations are working on quality improvement and/or innovation of their care practices. Although the effectiveness of improvement processes has been studied extensively, little attention has been given to sustainability of the changed work practices after implementation. The objective of this study is to develop a theoretical framework and measurement instrument for sustainability. To this end sustainability is conceptualized with two dimensions: routinization and institutionalization. Methods The exploratory methodological design consisted of three phases: a) framework development; b) instrument development; and c) field testing in former improvement teams in a quality improvement program for health care (N teams = 63, N individual = 112). Data were collected not until at least one year had passed after implementation. Underlying constructs and their interrelations were explored using Structural Equation Modeling and Principal Component Analyses. Internal consistency was computed with Cronbach's alpha coefficient. A long and a short version of the instrument are proposed. Results The χ2- difference test of the -2 Log Likelihood estimates demonstrated that the hierarchical two factor model with routinization and institutionalization as separate constructs showed a better fit than the one factor model (p < .01). Secondly, construct validity of the instrument was strong as indicated by the high factor loadings of the items. Finally, the internal consistency of the subscales was good. Conclusions The theoretical framework offers a valuable starting point for the analysis of sustainability on the level of actual changed work practices. Even though the two dimensions routinization and institutionalization are related, they are clearly distinguishable and each has distinct value in the discussion of sustainability. Finally, the subscales conformed to psychometric properties defined in literature. The instrument can be used in the evaluation of improvement projects. PMID:22087884

Extravehicular Crewman Work System (ECWS) study program. Volume 2: Construction

NASA Technical Reports Server (NTRS)

Wilde, R. C.

1980-01-01

The construction portion of the Extravehicular Crewman Work System Study defines the requirements and selects the concepts for the crewman work system required to support the construction of large structures in space.

25 CFR 900.127 - What can be included in the Indian tribe or tribal organization's contract budget?

Code of Federal Regulations, 2010 CFR

2010-04-01

... which phase (see § 900.112) of the construction process the Indian tribe or tribal organization is... associated with the management of the construction contract; and (4) In cases where the Indian tribe or... construction contract to make a reasonable profit, taking into consideration the risks associated with carrying...

A Phenomenological Study of the Work Environment in Long-Term Care Facilities for the Older Adults.

PubMed

Choi, Sandy Pin Pin; Yeung, Cheryl Chi Yan; Lee, Joseph Kok Long

2018-05-01

Attempts to meet the increasing demand for long-term care (LTC) services have been hindered by acute staff shortages and high turnover. Distinct from previous studies, a descriptive phenomenological approach with van Kaam's controlled explication method was adopted in this study, to delineate how attributes of the LTC work environment shape the workforce crisis. Individual interviews were conducted with 40 LTC workers from 10 facilities in Hong Kong. The results suggest that the work environment in LTC facilities is not only characterized by organization- and job-related attributes that influence staff outcomes but also is a socially constructed concept with derogatory connotations that can influence staff recruitment and retention. Concerted efforts from facility administrators and policy makers are needed to improve the quality of the work environment. Future initiatives should focus on developing a vision and strategic plan to facilitate the rise of the LTC sector as a profession.

Psychological contracts: a new strategy for retaining reduced-hour physicians.

PubMed

Hartwell, Jennifer K

2010-01-01

As a retention strategy, healthcare organizations offer reduced-hour schedules to physicians seeking better work-family balance. However, this quantitative study of 94 full-time and reduced-hour female physicians in the Boston area found that working fewer hours helps physicians achieve better balance but does not improve their burnout or career satisfaction, or impact their intention to quit or leave the field of medicine. Instead, the findings demonstrate that psychological contract fulfillment, which reflects the subjective nature of the employment relationship, is more important than work hours, an objective job condition, in predicting intention to quit and these other outcomes. A fine-grained analysis is initiated uncovering the multidimensionality of the psychological contract construct. To integrate successful reduced-hour arrangements for physicians, medical managers are directed to the importance of understanding the composition of reduced-hour physicians' psychological contracts, specifically, their need to do challenging work, receive high levels of supervisor support, and promotion opportunities.

Organizational factors related to occupational accidents in construction.

PubMed

Filho, J M Jackson; Fonseca, E D; Lima, F P A; Duarte, F J C M

2012-01-01

The purpose of this paper is to understand the influence of organizational factors on occupational accident causation. A field study was undertaken and focused on the phase of concreting the floors of a residential block in a building project in Brazil. The methodological approach was based on the analysis of carpenters' work practices and of the workers' accounts of minor falls. Observations were noted on work practices over this stage. Furthermore, interviews were conducted with the workers hired by the subcontractors and with professionals working for the main contractor. The results show that falls were related to the introduction of new building technology and its use by the workforce. The production planning and organization of activities by the subcontracted firms also led to temporary demands that were additional determining factors for falls on site. The work analysis reveals the need to consider organizational factors in prevention practices.

Team Leader Structuring for Team Effectiveness and Team Learning in Command-and-Control Teams

PubMed Central

van der Haar, Selma; Koeslag-Kreunen, Mieke; Euwe, Eline; Segers, Mien

2017-01-01

Due to their crucial and highly consequential task, it is of utmost importance to understand the levers leading to effectiveness of multidisciplinary emergency management command-and-control (EMCC) teams. We argue that the formal EMCC team leader needs to initiate structure in the team meetings to support organizing the work as well as facilitate team learning, especially the team learning process of constructive conflict. In a sample of 17 EMCC teams performing a realistic EMCC exercise, including one or two team meetings (28 in sum), we coded the team leader’s verbal structuring behaviors (1,704 events), rated constructive conflict by external experts, and rated team effectiveness by field experts. Results show that leaders of effective teams use structuring behaviors more often (except asking procedural questions) but decreasingly over time. They support constructive conflict by clarifying and by making summaries that conclude in a command or decision in a decreasing frequency over time. PMID:28490856

Towards organ printing: engineering an intra-organ branched vascular tree.

PubMed

Visconti, Richard P; Kasyanov, Vladimir; Gentile, Carmine; Zhang, Jing; Markwald, Roger R; Mironov, Vladimir

2010-03-01

Effective vascularization of thick three-dimensional engineered tissue constructs is a problem in tissue engineering. As in native organs, a tissue-engineered intra-organ vascular tree must be comprised of a network of hierarchically branched vascular segments. Despite this requirement, current tissue-engineering efforts are still focused predominantly on engineering either large-diameter macrovessels or microvascular networks. We present the emerging concept of organ printing or robotic additive biofabrication of an intra-organ branched vascular tree, based on the ability of vascular tissue spheroids to undergo self-assembly. The feasibility and challenges of this robotic biofabrication approach to intra-organ vascularization for tissue engineering based on organ-printing technology using self-assembling vascular tissue spheroids including clinically relevantly vascular cell sources are analyzed. It is not possible to engineer 3D thick tissue or organ constructs without effective vascularization. An effective intra-organ vascular system cannot be built by the simple connection of large-diameter vessels and microvessels. Successful engineering of functional human organs suitable for surgical implantation will require concomitant engineering of a 'built in' intra-organ branched vascular system. Organ printing enables biofabrication of human organ constructs with a 'built in' intra-organ branched vascular tree.

Network of likes and dislikes: Conflict and membership

NASA Astrophysics Data System (ADS)

Park, Hye Jin; Yi, Su Do; Kim, Dae Joong; Kim, Beom Jun

2016-11-01

We all have friends and foes. In the study of complex networks, such a pairwise interaction is described by a directed link since the relation is not necessarily symmetric. We study a real network constructed from a survey in which each individual chooses five members (s)he wants to work with, and other five (s)he does not like to work together. Although everyone's outdegrees for such like and dislike links are fixed to five, respectively, it is found that indegree sequence for each type of links exhibits very different behaviors. We also pursue to answer the question of proper divisions of the organization based on the concept of happiness defined for each directed relation. For example, two individuals connected by like (dislike) links in both directions are happy if they belong to the same (different) group(s). We then adopt the framework of the q-state Potts model with long-ranged ferromagnetic and antiferromagnetic interactions and discuss the group structure in the organization that minimizes a suitably defined unhappiness.

Much ado about mice: Standard-setting in model organism research.

PubMed

Hardesty, Rebecca A

2018-04-11

Recently there has been a practice turn in the philosophy of science that has called for analyses to be grounded in the actual doings of everyday science. This paper is in furtherance of this call and it does so by employing participant-observation ethnographic methods as a tool for discovering epistemological features of scientific practice in a neuroscience lab. The case I present focuses on a group of neurobiologists researching the genetic underpinnings of cognition in Down syndrome (DS) and how they have developed a new mouse model which they argue should be regarded as the "gold standard" for all DS mouse research. Through use of ethnographic methods, interviews, and analyses of publications, I uncover how the lab constructed their new mouse model. Additionally, I describe how model organisms can serve as abstract standards for scientific work that impact the epistemic value of scientific claims, regulate practice, and constrain future work. Copyright © 2018 Elsevier Ltd. All rights reserved.

Exploring Applications of Covalent Organic Frameworks: Homogeneous Reticulation of Radicals for Dynamic Nuclear Polarization.

PubMed

Cao, Wei; Wang, Wei David; Xu, Hai-Sen; Sergeyev, Ivan V; Struppe, Jochem; Wang, Xiaoling; Mentink-Vigier, Frederic; Gan, Zhehong; Xiao, Ming-Xing; Wang, Lu-Yao; Chen, Guo-Peng; Ding, San-Yuan; Bai, Shi; Wang, Wei

2018-06-06

Rapid progress has been witnessed in the past decade in the fields of covalent organic frameworks (COFs) and dynamic nuclear polarization (DNP). In this contribution, we bridge these two fields by constructing radical-embedded COFs as promising DNP agents. Via polarization transfer from unpaired electrons to nuclei, DNP realizes significant enhancement of NMR signal intensities. One of the crucial issues in DNP is to screen for suitable radicals to act as efficient polarizing agents, the basic criteria for which are homogeneous distribution and fixed orientation of unpaired electrons. We therefore envisioned that the crystalline and porous structures of COFs, if evenly embedded with radicals, may work as a new "crystalline sponge" for DNP experiments. As a proof of concept, we constructed a series of proxyl-radical-embedded COFs (denoted as PR( x)-COFs) and successfully applied them to achieve substantial DNP enhancement. Benefiting from the bottom-up and multivariate synthetic strategies, proxyl radicals have been covalently reticulated, homogeneously distributed, and rigidly embedded into the crystalline and mesoporous frameworks with adjustable concentration ( x%). Excellent performance of PR( x)-COFs has been observed for DNP 1 H, 13 C, and 15 N solid-state NMR enhancements. This contribution not only realizes the direct construction of radical COFs from radical monomers, but also explores the new application of COFs as DNP polarizing agents. Given that many radical COFs can therefore be rationally designed and facilely constructed with well-defined composition, distribution, and pore size, we expect that our effort will pave the way for utilizing radical COFs as standard polarizing agents in DNP NMR experiments.

Defining the external implementation context: an integrative systematic literature review.

PubMed

Watson, Dennis P; Adams, Erin L; Shue, Sarah; Coates, Heather; McGuire, Alan; Chesher, Jeremy; Jackson, Joanna; Omenka, Ogbonnaya I

2018-03-27

Proper implementation of evidence-based interventions is necessary for their full impact to be realized. However, the majority of research to date has overlooked facilitators and barriers existing outside the boundaries of the implementing organization(s). Better understanding and measurement of the external implementation context would be particularly beneficial in light of complex health interventions that extend into and interact with the larger environment they are embedded within. We conducted a integrative systematic literature review to identify external context constructs likely to impact implementation of complex evidence-based interventions. The review process was iterative due to our goal to inductively develop the identified constructs. Data collection occurred in four primary stages: (1) an initial set of key literature across disciplines was identified and used to inform (2) journal and (3) author searches that, in turn, informed the design of the final (4) database search. Additionally, (5) we conducted citation searches of relevant literature reviews identified in each stage. We carried out an inductive thematic content analysis with the goal of developing homogenous, well-defined, and mutually exclusive categories. We identified eight external context constructs: (1) professional influences, (2) political support, (3) social climate, (4) local infrastructure, (5) policy and legal climate, (6) relational climate, (7) target population, and (8) funding and economic climate. This is the first study to our knowledge to use a systematic review process to identify empirically observed external context factors documented to impact implementation. Comparison with four widely-utilized implementation frameworks supports the exhaustiveness of our review process. Future work should focus on the development of more stringent operationalization and measurement of these external constructs.

29 CFR 1910.12 - Construction work.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 5 2011-07-01 2011-07-01 false Construction work. 1910.12 Section 1910.12 Labor... Construction work. (a) Standards. The standards prescribed in part 1926 of this chapter are adopted as... work. Each employer shall protect the employment and places of employment of each of his employees...

14 CFR 151.49 - Performance of construction work: Contract requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Performance of construction work: Contract... § 151.49 Performance of construction work: Contract requirements. (a) Contract provisions. In addition to any other provisions necessary to ensure completion of the work in accordance with the grant...

Mental models of safety: do managers and employees see eye to eye?

PubMed

Prussia, Gregory E; Brown, Karen A; Willis, P Geoff

2003-01-01

Disagreements between managers and employees about the causes of accidents and unsafe work behaviors can lead to serious workplace conflicts and distract organizations from the important work of establishing positive safety climate and reducing the incidence of accidents. In this study, the authors examine a model for predicting safe work behaviors and establish the model's consistency across managers and employees in a steel plant setting. Using the model previously described by Brown, Willis, and Prussia (2000), the authors found that when variables influencing safety are considered within a framework of safe work behaviors, managers and employees share a similar mental model. The study then contrasts employees' and managers' specific attributional perceptions. Findings from these more fine-grained analyses suggest the two groups differ in several respects about individual constructs. Most notable were contrasts in attributions based on their perceptions of safety climate. When perceived climate is poor, managers believe employees are responsible and employees believe managers are responsible for workplace safety. However, as perceived safety climate improves, managers and employees converge in their perceptions of who is responsible for safety. It can be concluded from this study that in a highly interdependent work environment, such as a steel mill, where high system reliability is essential and members possess substantial experience working together, managers and employees will share general mental models about the factors that contribute to unsafe behaviors, and, ultimately, to workplace accidents. It is possible that organizations not as tightly coupled as steel mills can use such organizations as benchmarks, seeking ways to create a shared understanding of factors that contribute to a safe work environment. Part of this improvement effort should focus on advancing organizational safety climate. As climate improves, managers and employees are likely to agree more about the causes of safe/unsafe behaviors and workplace accidents, ultimately increasing their ability to work in unison to prevent accidents and to respond appropriately when they do occur. Finally, the survey items included in this study may be useful to organizations wishing to conduct self-assessments.

Work-related to musculoskeletal disorder amongst Malaysian construction trade workers: Bricklayers

NASA Astrophysics Data System (ADS)

Lop, Nor Suzila; Kamar, Izatul Farrita Mohd; Aziz, Mohd Nasiruddin Abdul; Abdullah, Lizawati; Akhir, Norizan Mt

2017-10-01

Construction sector is one of the highest risk industries contributing to the development of work-related musculoskeletal disorders. In general construction activities involve the composition of various construction trades, such as painting, plastering, concreting, paving and bricklaying. Different construction trades workers are exposed to risk factors depending their job and task. There are risk factors associated with the construction trade workers activities such as concrete work, brickwork, piling work excavation works and etc. Thus, the aim of this research is to document the critical activities that affect the musculoskeletal disorders amongst Malaysian construction trade workers, in particular to the bricklayers. The objective of this research is to identify the critical activities that affect to the musculoskeletal disorder among the bricklayers. The data for this research was collected via observation to the construction workers for the specific trades which are bricklayers in Perak. Finding of this research is by identifying the critical activities involved that affect the musculoskeletal disorder suffering among bricklayers.

Building health behavior models to guide the development of just-in-time adaptive interventions: A pragmatic framework.

PubMed

Nahum-Shani, Inbal; Hekler, Eric B; Spruijt-Metz, Donna

2015-12-01

Advances in wireless devices and mobile technology offer many opportunities for delivering just-in-time adaptive interventions (JITAIs)-suites of interventions that adapt over time to an individual's changing status and circumstances with the goal to address the individual's need for support, whenever this need arises. A major challenge confronting behavioral scientists aiming to develop a JITAI concerns the selection and integration of existing empirical, theoretical and practical evidence into a scientific model that can inform the construction of a JITAI and help identify scientific gaps. The purpose of this paper is to establish a pragmatic framework that can be used to organize existing evidence into a useful model for JITAI construction. This framework involves clarifying the conceptual purpose of a JITAI, namely, the provision of just-in-time support via adaptation, as well as describing the components of a JITAI and articulating a list of concrete questions to guide the establishment of a useful model for JITAI construction. The proposed framework includes an organizing scheme for translating the relatively static scientific models underlying many health behavior interventions into a more dynamic model that better incorporates the element of time. This framework will help to guide the next generation of empirical work to support the creation of effective JITAIs. (PsycINFO Database Record (c) 2015 APA, all rights reserved).

Improving client-centred care and services: the role of front/back-office configurations.

PubMed

Broekhuis, Manda; de Blok, Carolien; Meijboom, Bert

2009-05-01

This paper is a report of a study conducted to explore the application of designing front- and back-office work resulting in efficient client-centred care in healthcare organizations that supply home care, welfare and domestic services. Front/back-office configurations reflect a neglected domain of design decisions in the development of more client-centred processes and structures without incurring major cost increases. Based on a literature search, a framework of four front/back-office configurations was constructed. To illustrate the usefulness of this framework, a single, longitudinal case study was performed in a large organization, which provides home care, welfare and domestic services for a sustained period (2005-2006). The case study illustrates how front/back-office design decisions are related to the complexity of the clients' demands and the strategic objectives of an organization. The constructed framework guides the practical development of front/back-office designs, and shows how each design contributes differently to such performance objectives as quality, speed and efficiency. The front/back-office configurations presented comprise an important first step in elaborating client-centred care and service provision to the operational level. It helps healthcare organizations to become more responsive and to provide efficient client-centred care and services when approaching demand in a well-tuned manner. In addition to its applicability in home care, we believe that a deliberate front/back-office configuration also has potential in other fields of health care.

Design and construction of a 2D metal organic framework with multiple cavities: a nonregular net with a paracyclophane that codes for multiply fused nodes.

PubMed

Papaefstathiou, Giannis S; Friscić, Tomislav; MacGillivray, Leonard R

2005-10-19

A metal organic framework with two different nodes (circle and square) and a structure related to one of the 20 known 2-uniform nets has been constructed using an organic building unit that codes for multiply fused nodes.

The concept of value stream mapping to reduce of work-time waste as applied the smart construction management

NASA Astrophysics Data System (ADS)

Elizar, Suripin, Wibowo, Mochamad Agung

2017-11-01

Delays in construction sites occur due to systematic additions of time waste in various activities that are part of the construction process. Work-time waste is non-adding value activity which used to differentiate between physical construction waste found on site and other waste which occurs during the construction process. The aim of this study is identification using the concept of Value Stream Mapping (VSM) to reduce of work-time waste as applied the smart construction management.VSM analysis is a method of business process improvement. The application of VSM began in the manufacturing community. The research method base on theoretically informed case study and literature review. The data have collected using questionnaire through personal interviews from 383 respondents on construction project in Indonesia. The results show that concept of VSM can identify causes of work-time waste. Base on result of questioners and quantitative approach analysis was obtained 29 variables that influence of work-time waste or non-value-adding activities. Base on three cases of construction project founded that average 14.88% of working time was classified as waste. Finally, the concept of VSM can recommend to identification of systematic for reveal current practices and opportunities for improvement towards global challenges. The concept of value stream mapping can help optimize to reduce work-time waste and improve quality standard of construction management. The concept is also can help manager to make a decision to reduce work-time waste so as to obtain of result in more efficient for performance and sustainable construction project.

Identification of ergonomics interventions used to reduce musculoskeletal loading for building installation tasks.

PubMed

Albers, Jim; Estill, Cherie; MacDonald, Leslie

2005-07-01

Skilled workers in the mechanical and electrical installation (M/EI) building and construction trades experience high rates of disabling work-related musculoskeletal disorders (WMSDs). The M/EI trades involve installing piping; heating, ventilation and air conditioning (HVAC), and electrical systems in residential, commercial, and industrial buildings. In the absence of an ergonomics standard in the United States, some building and construction contractors, including M/EI sector contractors, have implemented various ergonomics interventions on their worksites on a voluntary basis. However, no data were available to determine the type of voluntary control measures being implemented, the task-specific hazards for which control measures needed to be developed or refined, and perceived barriers to improving hazard control. As part of a larger effort to obtain this data, the National Institute for Occupational Safety and Health (NIOSH) organized a stakeholder meeting to gather information regarding ergonomics interventions or "best practices" by M/EI contractors and tradespeople. The attendees included 39 industry representatives, 17 construction ergonomics researchers from government and academia, and four ergonomics consultants with experience in the construction industry. Participants spent more than 50% of time meeting in small trade-specific breakout sessions. According to the participants, tasks common to the three trades included (1) drill holes and shoot fasteners; (2) place and install systems, and (3) lift and carry materials and equipment. Engineering interventions described in the stakeholder meeting included tools, equipment, and engineered building materials; administrative controls largely consisted of training and education programs and modifications of work and management practice. Most participants believed that there were significant limits to the impact individual contractors and tradespeople could have in leading ergonomics improvement in the building and construction industry.

Interpersonal mistreatment in the workplace: the interface and impact of general incivility and sexual harassment.

PubMed

Lim, Sandy; Cortina, Lilia M

2005-05-01

This article examined the relationships and outcomes of behaviors falling at the interface of general and sexual forms of interpersonal mistreatment in the workplace. Data were collected with surveys of two different female populations (Ns = 833 and 1,425) working within a large public-sector organization. Findings revealed that general incivility and sexual harassment were related constructs, with gender harassment bridging the two. Moreover, these behaviors tended to co-occur in organizations, and employee well-being declined with the addition of each type of mistreatment to the workplace experience. This behavior type (or behavior combination) effect remained significant even after controlling for behavior frequency. The findings are interpreted from perspectives on sexual aggression, social power, and multiple victimization.

The Self-Assembly of DNA Nanostructures for use as Organizing Templates

NASA Astrophysics Data System (ADS)

Samec, Timothy; Cholewinski, Mitchell; Reamer, Nickalas; Reardon, Michael; Ford, Arlene

There is growing interest in the self-assembling capabilities of DNA to create functional nanodevices for use in cancer detection and treatment. One important reason for this interest is that DNA nanostructures are highly programmable molecules. This means that these structures allow for increased stability and control when designing biomacromolecules via adhesion of plasmonic nanoparticles and other similar materials. Our current work reports on the procedure and construction of hexagonal two-dimensional DNA lattice structures using three specific DNA single strands. We also reflect on several barriers that were presented during fabrication as well as the adaptations made to overcome the aforementioned barriers by improving the quality, reproducibility, and yield of the hexagonal two-dimensional DNA lattice as organizing templates.

A Tissue Engineered Model of Aging: Interdependence and Cooperative Effects in Failing Tissues.

PubMed

Acun, A; Vural, D C; Zorlutuna, P

2017-07-11

Aging remains a fundamental open problem in modern biology. Although there exist a number of theories on aging on the cellular scale, nearly nothing is known about how microscopic failures cascade to macroscopic failures of tissues, organs and ultimately the organism. The goal of this work is to bridge microscopic cell failure to macroscopic manifestations of aging. We use tissue engineered constructs to control the cellular-level damage and cell-cell distance in individual tissues to establish the role of complex interdependence and interactions between cells in aging tissues. We found that while microscopic mechanisms drive aging, the interdependency between cells plays a major role in tissue death, providing evidence on how cellular aging is connected to its higher systemic consequences.

Child, parent, and parent-child emotion narratives: implications for developmental psychopathology.

PubMed

Oppenheim, David

2006-01-01

Studies using narratives with children and parents offer ways to study affective meaning-making processes that are central in many theories of developmental psychopathology. This paper reviews theory regarding affective meaning making, and argues that narratives are particularly suited to examine such processes. The review of narrative studies and methods is organized into three sections according to the focus on child, parent, and parent-child narratives. Within each focus three levels of analysis are considered: (a) narrative organization and coherence, (b) narrative content, and (c) the behavior/interactions of the narrator(s). The implications of this research for developmental psychopathology and clinical work are discussed with an emphasis on parent-child jointly constructed narratives as the meeting point of individual child and parent narratives.

Organization aesthetics in nursing homes.

PubMed

Hujala, Anneli; Rissanen, Sari

2011-05-01

The aim of this study was to make visible the material dimensions of nursing management.   Management theories have mainly ignored the material dimensions, namely the physical spaces in which management actually takes place as well as the physical bodies of organization members. The perspective of organization aesthetics enhances our understanding of the role of materiality in nursing management. The data were collected in 2009 using observation and interviews in eight nursing homes. Qualitative content analysis with critical interpretations was used. Three main issues of organizational aesthetics related to nursing management were identified: (1) the functionality of working spaces and equipment; (2) the relevance of 'organizational' space; and (3) the emotional-aesthetic dimension of daily work. Materiality is closely related to management topics, such as decision-making, values and identity formation of organizational members. Aesthetic dimensions of care are constructed by management practices which, in their turn, influence the nature of management. Implications for nursing management  Nurse managers need to be aware of the unintended and unnoticed consequences of materiality and aesthetics. Space and body issues may have considerable effects, for example, on the identity of care workers and on the attractiveness of the care branch. © 2011 The Authors. Journal compilation © 2011 Blackwell Publishing Ltd.

Building more powerful less expensive supercomputers using Processing-In-Memory (PIM) LDRD final report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Murphy, Richard C.

2009-09-01

This report details the accomplishments of the 'Building More Powerful Less Expensive Supercomputers Using Processing-In-Memory (PIM)' LDRD ('PIM LDRD', number 105809) for FY07-FY09. Latency dominates all levels of supercomputer design. Within a node, increasing memory latency, relative to processor cycle time, limits CPU performance. Between nodes, the same increase in relative latency impacts scalability. Processing-In-Memory (PIM) is an architecture that directly addresses this problem using enhanced chip fabrication technology and machine organization. PIMs combine high-speed logic and dense, low-latency, high-bandwidth DRAM, and lightweight threads that tolerate latency by performing useful work during memory transactions. This work examines the potential ofmore » PIM-based architectures to support mission critical Sandia applications and an emerging class of more data intensive informatics applications. This work has resulted in a stronger architecture/implementation collaboration between 1400 and 1700. Additionally, key technology components have impacted vendor roadmaps, and we are in the process of pursuing these new collaborations. This work has the potential to impact future supercomputer design and construction, reducing power and increasing performance. This final report is organized as follow: this summary chapter discusses the impact of the project (Section 1), provides an enumeration of publications and other public discussion of the work (Section 1), and concludes with a discussion of future work and impact from the project (Section 1). The appendix contains reprints of the refereed publications resulting from this work.« less

Risky business. Organizations tackle infection control during construction.

PubMed

Burmhal, Beth

2003-06-01

Construction projects, no matter how minor, can be dangerous for patients who are especially sensitive to infection. Guidelines from three prominent organizations are finally helping hospitals understand how to prevent infections during those projects.

Tetraphenylethylene-Interweaving Conjugated Macrocycle Polymer Materials as Two-Photon Fluorescence Sensors for Metal Ions and Organic Molecules.

PubMed

Li, Xi; Li, Zheng; Yang, Ying-Wei

2018-05-01

A luminescent conjugated macrocycle polymer (CMP) with strong two-photon fluorescence property, namely, P[5]-TPE-CMP, is constructed from ditriflate-functionalized pillar[5]arene and a 1,1,2,2-tetrakis(4-ethynylphenyl)ethylene (TPE) linker through a Sonogashira-Hagihara cross-coupling reaction. Significantly, in sharp contrast with the corresponding conjugated microporous polymer without synthetic macrocycles, P[5]-TPE-CMP shows an outstanding stability against photobleaching and exhibits highly selective cation sensing capability toward Fe 3+ at different excitation wavelengths (both UV and red-near-infrared regions). Meanwhile, its fluorescence could also be sufficiently quenched by 4-amino azobenzene, a frequently used organic dye that is certified to be carcinogenic, as compared with a group of common organic compounds. This work paves a new way for enhancing the properties of porous organic polymers through the introduction of supramolecular macrocycles like macrocyclic arenes. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Bimetallic Metal-Organic Frameworks for Controlled Catalytic Graphitization of Nanoporous Carbons

PubMed Central

Tang, Jing; Salunkhe, Rahul R.; Zhang, Huabin; Malgras, Victor; Ahamad, Tansir; Alshehri, Saad M.; Kobayashi, Naoya; Tominaka, Satoshi; Ide, Yusuke; Kim, Jung Ho; Yamauchi, Yusuke

2016-01-01

Single metal-organic frameworks (MOFs), constructed from the coordination between one-fold metal ions and organic linkers, show limited functionalities when used as precursors for nanoporous carbon materials. Herein, we propose to merge the advantages of zinc and cobalt metals ions into one single MOF crystal (i.e., bimetallic MOFs). The organic linkers that coordinate with cobalt ions tend to yield graphitic carbons after carbonization, unlike those bridging with zinc ions, due to the controlled catalytic graphitization by the cobalt nanoparticles. In this work, we demonstrate a feasible method to achieve nanoporous carbon materials with tailored properties, including specific surface area, pore size distribution, degree of graphitization, and content of heteroatoms. The bimetallic-MOF-derived nanoporous carbon are systematically characterized, highlighting the importance of precisely controlling the properties of the carbon materials. This can be done by finely tuning the components in the bimetallic MOF precursors, and thus designing optimal carbon materials for specific applications. PMID:27471193

Stimulated emission within the exciplex band by plasmonic-nanostructured polymeric heterojunctions.

PubMed

Zhang, Xinping; Li, Hongwei; Wang, Yimeng; Liu, Feifei

2015-03-19

Organic heterojunctions have been extensively employed in the design of light-emitting diodes, photovoltaic devices, and thin-film field-effect transistors, which can be achieved by constructing a bilayer or a multi-layered thin-film deposition, or by blending two or more organic semiconductors with different charge-transport performances. Charge transfer excited states or exciplex may form on the heterointerfaces. Efficient light-emitting diodes have been demonstrated using exciplex emission. However, lasing or stimulated emission processes have not been observed with exciplex formation at organic heterojunctions. In this work, we demonstrate strong coherent interaction between photons and exciplex formation in the blends of poly-9,9'-dioctylfluorene-co-bis-N,N'-(4-butylphenyl)-bis-N,N'-phenyl-l,4-phenylenediamine (PFB) and poly-9,9'-dioctylfluorene-co-benzothiadiazole (F8BT), leading to transient stimulated exciplex emission. The responsible mechanisms involve plasmonic local-field enhancement and plasmonic feedback in a three-dimensional gold-nanoparticle matrix.

Flexible organic tandem solar modules: a story of up-scaling

NASA Astrophysics Data System (ADS)

Spyropoulos, George D.; Kubis, Peter; Li, Ning; Lucera, Luca; Salvador, Michael; Baran, Derya; Machui, Florian; Ameri, Tayebeh; Voigt, Monika M.; Brabec, Christoph J.

2014-10-01

The competition in the field of solar energy between Organic Photovoltaics (OPVs) and several Inorganic Photovoltaic technologies is continuously increasing to reach the ultimate purpose of energy supply from inexpensive and easily manufactured solar cell units. Solution-processed printing techniques on flexible substrates attach a tremendous opportunity to the OPVs for the accomplishment of low-cost and large area applications. Furthermore, tandem architectures came to boost up even more OPVs by increasing the photon-harvesting properties of the device. In this work, we demonstrate the road of realizing flexible organic tandem solar modules constructed by a fully roll-to-roll compatible processing. The modules exhibit an efficiency of 5.4% with geometrical fill factors beyond 80% and minimized interconnection-resistance losses. The processing involves low temperature (<70 °C), coating methods compatible with slot die coating and high speed and precision laser patterning.

An Integrative, Multi-Scale Computational Model of a Swimming Lamprey Fully Coupled to Its Fluid Environment and Incorporating Proprioceptive Feedback

NASA Astrophysics Data System (ADS)

Hamlet, C. L.; Hoffman, K.; Fauci, L.; Tytell, E.

2016-02-01

The lamprey is a model organism for both neurophysiology and locomotion studies. To study the role of sensory feedback as an organism moves through its environment, a 2D, integrative, multi-scale model of an anguilliform swimmer driven by neural activation from a central pattern generator (CPG) is constructed. The CPG in turn drives muscle kinematics and is fully coupled to the surrounding fluid. The system is numerically evolved in time using an immersed boundary framework producing an emergent swimming mode. Proprioceptive feedback to the CPG based on experimental observations adjust the activation signal as the organism interacts with its environment. Effects on the speed, stability and cost (metabolic work) of swimming due to nonlinear dependencies associated with muscle force development combined with proprioceptive feedback to neural activation are estimated and examined.

The developmental dynamics of behavioral growth processes in rodent egocentric and allocentric space.

PubMed

Golani, Ilan

2012-06-01

In this review I focus on how three methodological principles advocated by Philip Teitelbaum influenced my work to this day: that similar principles of organization should be looked for in ontogeny and recovery of function; that the order of emergence of behavioral components provides a view on the organization of that behavior; and that the components of behavior should be exhibited by the animal itself in relatively pure form. I start by showing how these principles influenced our common work on the developmental dynamics of rodent egocentric space, and then proceed to describe how these principles affected my work with Yoav Benjamini and others on the developmental dynamics of rodent allocentric space. We analyze issues traditionally addressed by physiological psychologists with methods borrowed from ethology, EW (Eshkol-Wachman) movement notation, dynamical systems and exploratory data analysis. Then we show how the natural origins of axes embodied by the behavior of the organism itself, are used by us as the origins of axes for the measurement of the developmental moment-by-moment dynamics of behavior. Using this methodology we expose similar principles of organization across situations, species and preparations, provide a developmental view on the organization of behavior, expose the natural components of behavior in relatively pure form, and reveal how low level primitives generate higher level constructs. Advances in tracking technology should allow us to study how movements in egocentric and allocentric spaces interlace. Tracking of multi-limb coordination, progress in online recording of neural activity in freely moving animals, and the unprecedented accumulation of genetically engineered mouse preparations makes the behavioral ground plan exposed in this review essential for a systematic study of the brain/behavior interface. Copyright © 2012 Elsevier B.V. All rights reserved.

Modeling Fusion of Cellular Aggregates in Biofabrication Using Phase Field Theories (Preprint)

DTIC Science & Technology

2011-01-01

biofabrication process known as bioprinting [25], live multicellular aggregates/clusters are used to make tissue or organ constructs via the layer-by-layer...recipient organism , where the maturation of the new organ takes place [17, 24]. In a novel biomimetic biofabrication process, called “ bioprinting ...fundamental biophysical process in emerging organ bioprinting technology. The bio-constructs ranging from the ones comprised of tissue spheroids to

Creating a Learning Culture for Medical Consortia in China.

PubMed

He, Guozhong; Chen, Zimin

In China's recent health care reforms, both individuals and organizations have shown an ever-growing desire and demand for new knowledge and skills. A health care delivery system (HCDS) should explore new ways for creating a learning organization (LO) and should organically combine HCDS culture construction with the LO construction to build a cultural atmosphere that is conducive to the development of the LO. This article describes the implementation phase, characteristics, and realization strategy of an HCDS construction for the ultimate purpose of enhancing HCDS cohesion, solidarity, and sustainable development.

14 CFR 151.53 - Performance of construction work: Labor requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Performance of construction work: Labor... § 151.53 Performance of construction work: Labor requirements. A sponsor who is required to include in a... during the performance of work under the contract, to the extent necessary to determine whether the...

Class Construction: White Working-Class Student Identity in the New Millennium

ERIC Educational Resources Information Center

Freie, Carrie

2007-01-01

"Class Construction" explores class, racial, and gender identity construction among white, working-class students. Delving into River City High School, Freie asks what happens to the adolescent children of working-class families when economic changes such as globalization and technological advancements have altered the face of working-class jobs.…

Integrated risk management for improving internal traffic control, work-zone safety, and mobility during major construction : tech transfer summary.

DOT National Transportation Integrated Search

2012-10-01

Construction work zones are among the most dangerous places to work in any industry in the world. This is because many factors in construction, such as constant change in working environments and driver errors, contribute to a workplace with a higher...

Falling out: authoritative knowledge and women's experiences with pelvic organ prolapse.

PubMed

Low, Lisa Kane; Tumbarello, Julie A

2012-01-01

Despite the high prevalence of pelvic organ prolapse, many women suffer in silence, lacking the language and opportunity to describe their condition. There are limited descriptions of women's experiences with pelvic organ prolapse in the literature. This qualitative study addressed the knowledge and experience of women with pelvic organ prolapse. Semistructured interviews were conducted with 13 women who had been previously diagnosed with pelvic organ prolapse. Transcripts of the interviews were reviewed and coded using a process of content analysis compared against the framework of authoritative knowledge, developed by Brigitte Jordan. By applying the concept of authoritative knowledge, we identified 3 themes of how women construct understanding about pelvic organ prolapse and how they demonstrate deference to the authoritative knowledge of medical providers. First, we found through women's narratives that authoritative knowledge was held by the health care provider and is considered consequential and legitimate by all participants. Second, women reported that the health care provider's authoritative knowledge was valued over personal, experiential knowledge. Finally, women described how they work with their health care providers to create a system of authoritative knowledge as they seek treatment for or discuss their condition. Throughout the narratives, women's experiences are not legitimized by the women or the medical community, perpetuating the "hidden" nature of these conditions. This analysis provides qualitative evidence of Jordan's authoritative knowledge: women and health care providers contribute to dimensions of authoritative knowledge surrounding pelvic organ prolapse. Despite what women experience, the health care provider's definition and understanding of pelvic organ prolapse is seen as legitimate and consequential. Because of their construction of their condition, and the power dynamic at play, women are silenced, and their expertise about their bodies is delegitimized, limiting their active participation in seeking care for this condition. © 2012 by the American College of Nurse-Midwives.

Falling Out: Authoritative Knowledge and Women’s Experience with Pelvic Organ Prolapse

PubMed Central

Low, Lisa Kane; Tumbarello, Julie A.

2014-01-01

Introduction Despite the high prevalence of pelvic organ prolapse many women suffer in silence, lacking the language and opportunity to describe their condition. There are limited descriptions of women’s experiences with pelvic organ prolapse in the literature. This qualitative study addressed the knowledge and experience of women with pelvic organ prolapse. Methods Semi-structured interviews were conducted with 13 women who had been previously diagnosed with pelvic organ prolapse. Transcripts of the interviews were reviewed and coded using a process of content analysis compared against the framework of authoritative knowledge, developed by Bridgitte Jordan. Results By applying the concept of “authoritative knowledge,” we identified three themes of how women construct understanding about their pelvic organ prolapse and how they demonstrate deference to the authoritative knowledge of medical providers. First, we found through women’s narratives that authoritative knowledge was held by the health care provider and is considered consequential and legitimate by all participants. Second, women reported that the health care provider’s authoritative knowledge was valued over personal, experiential knowledge. Finally, women describe how they work with their health care providers to create a system of authoritative knowledge as they seek treatment for or discuss their condition. Throughout the narratives, women’s experiences are not well acknowledged by themselves or the medical community, perpetuating the “hidden” nature of these conditions. Discussion This analysis provides qualitative evidence of Jordan’s authoritative knowledge: women and health care providers contribute to dimensions of authoritative knowledge surrounding pelvic organ prolapse. Despite what women experience, the health care provider’s definition and understanding of pelvic organ prolapse is seen as legitimate and consequential. Because of their construction of their condition, and the power dynamic at play, women are silenced and their expertise about their body is delegitimized, limiting their active participation in seeking care for this condition. PMID:22954080

Why developmental niche construction is not selective niche construction: and why it matters.

PubMed

Stotz, Karola

2017-10-06

In the last decade, niche construction has been heralded as the neglected process in evolution. But niche construction is just one way in which the organism's interaction with and construction of the environment can have potential evolutionary significance. The constructed environment does not just select for , it also produces new variation. Nearly 3 decades ago, and in parallel with Odling-Smee's article 'Niche-constructing phenotypes', West and King introduced the 'ontogenetic niche' to give the phenomena of exo genetic inheritance a formal name. Since then, a range of fields in the life sciences and medicine has amassed evidence that parents influence their offspring by means other than DNA (parental effects), and proposed mechanisms for how heritable variation can be environmentally induced and developmentally regulated. The concept of 'developmental niche construction' (DNC) elucidates how a diverse range of mechanisms contributes to the transgenerational transfer of developmental resources. My most central of claims is that whereas the selective niche of niche construction theory is primarily used to explain the active role of the organism in its selective environment, DNC is meant to indicate the active role of the organism in its developmental environment. The paper highlights the differences between the construction of the selective and the developmental niche, and explores the overall significance of DNC for evolutionary theory.

Monitoring of the effect of biological activity on the pedogenesis of a constructed Technosol

NASA Astrophysics Data System (ADS)

Salifou Jangorzo, Nouhou; Watteau, Françoise; Schwartz, Christophe

2014-05-01

Pedogenesis is the set of steps, which lead to the formation and evolution of soils under pedogenetic factors and processes. They may be described quantitatively for a modeling end. For this purpose, constructed Technosols are candidates to be studied, because their initial composition is well described. Furthermore, among pedogenetic factors, living organisms are known to play a major role in soil formation. The most challenging objective of our work is then to monitor in situ the effect of biological agents on soil evolution. However, soil pedogenesis is known to be dynamic, therefore visualizing in situ plant roots or soil fauna in contact with soil, will help understand better how pedogenesis occurs realistically. The aim of this work is to study in situ, visually and quantitatively, the evolution of a constructed Technosol pedogenesis using an innovative dispositive of observation on cosmes. The Technosol is constructed in three horizons, from bottom to top we have: gravels, treated industrial soil and paper mill sludge (2/3, 1/3 masse ratio) and green waste compost. The soil is put into a cosme equipped with image acquisition devices. Factors are organized into two modalities each repeated three times. "Plant", where five seeds of white lupin are sown in each cosme. "Plant and Fauna" where six epigeic adult earthworms and five seeds of white lupin are inoculated, and a "control". A moisture of 60 - 80 % field capacity is maintained in all modalities. Results show that roots grow at 10 mm.day-1 speed during the first three weeks. Roots increase porosity and aggregation with time. Earthworms explore the soil randomly by creating and filling burrows. At a second time, they create their burrows preferentially along plant roots. Roots and earthworms contribute to the rapid increase of porosity (9.81 times control at 268 days) and aggregation (10.15 times control at 268 days) during time, in the early stages of pedogenesis. In situ and non-destructive observation of soil profiles is therefore an innovative way of monitoring and quantifying the impact of pedogenetic factors on the evolution of Technosols.

Organic Light-Emitting Transistors: Materials, Device Configurations, and Operations.

PubMed

Zhang, Congcong; Chen, Penglei; Hu, Wenping

2016-03-09

Organic light-emitting transistors (OLETs) represent an emerging class of organic optoelectronic devices, wherein the electrical switching capability of organic field-effect transistors (OFETs) and the light-generation capability of organic light-emitting diodes (OLEDs) are inherently incorporated in a single device. In contrast to conventional OFETs and OLEDs, the planar device geometry and the versatile multifunctional nature of OLETs not only endow them with numerous technological opportunities in the frontier fields of highly integrated organic electronics, but also render them ideal scientific scaffolds to address the fundamental physical events of organic semiconductors and devices. This review article summarizes the recent advancements on OLETs in light of materials, device configurations, operation conditions, etc. Diverse state-of-the-art protocols, including bulk heterojunction, layered heterojunction and laterally arranged heterojunction structures, as well as asymmetric source-drain electrodes, and innovative dielectric layers, which have been developed for the construction of qualified OLETs and for shedding new and deep light on the working principles of OLETs, are highlighted by addressing representative paradigms. This review intends to provide readers with a deeper understanding of the design of future OLETs. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The Abstraction Ability in Constructing Relation Within Triangles by The Seventh Grade Students of Junior High School

NASA Astrophysics Data System (ADS)

Annas, Suwardi; Djadir; Mutmainna Hasma, Sitti

2018-01-01

on is an activity to organize a mathematical concept that has been previously owned into a new mathematical structure. Activites in abstraction are recognizing, organizing and constructing. Recognizing is a process of identifying a mathematical structure that had existed before. Organizing is a process of using structural knowledge to be assembled into a solution of a problem and constructing is a process of organizing the characteristics of the object into a new structure that does not exist. In abstraction process, the students use attributes to address the object, including routine attribute, nonroutine attributes, and meaningless attributes. This research applied descriptive qualitative research which aimed to describe the abstraction ability of students from high, moderate, and low groups to construct a relation within triangle. In collecting the data, this research used students’ pre-ability math test, abstraction test, and guided interview. The sampling technique in this research was based on the students’ scores in pre-ability math test, which were divided into three groups. Two students from each group were opted as the subjects of this research. Questions of the test are based on the indicators of steps in abstraction activity. Thus, based on the data gained in this research, researcher determined the tendency of attributes used in each abstraction activity. The result of this research revealed that students from high, moderate and low groups were prone to use routine attributes in recognizing triangles. In organizing the characteristics within triangles, high group tended to organize the triangle correctly, while the moderate and low groups tended to organize the triangle incorrectly. In constructing relation within triangles, students in high, moderate and low groups construct it incompletely.

Composition-property relationships in multifunctional hollow mesoporous carbon nanosystems for PH-responsive magnetic resonance imaging and on-demand drug release

NASA Astrophysics Data System (ADS)

Zhang, Shengjian; Qian, Xiaoqing; Zhang, Linlin; Peng, Weijun; Chen, Yu

2015-04-01

The construction of intelligent stimuli-responsive nanosystems can substantially improve the sensitivity/resolution/specificity of diagnostic imaging and enhance the therapeutic efficiency of chemotherapy for cancer treatment. This work reports on a generic construction strategy to achieve a multiple stimuli-responsive theranostic system for cancer simply by optimizing the chemical compositions of inorganic nanoplatforms to avoid the tedious and complicated synthetic procedure for traditional organic or organic/inorganic nanosystems. Based on the ``breaking up'' nature of manganese oxides and specific features of the carbonaceous framework to interact with aromatic drug molecules, manganese oxide nanoparticles were elaborately integrated into hollow mesoporous carbon nanocapsules by a simple in situ framework redox strategy to realize concurrent pH-sensitive T1-weighted magnetic resonance imaging (MRI) and pH-/HIFU-responsive on-demand drug release. The ultrasensitive disease-triggered MRI performance has been successfully demonstrated by a 52.5-fold increase of longitudinal relaxivity (r1 = 10.5 mM-1 s-1) and on nude mice 4T1 xenograft. The pH- and HIFU-triggered doxorubicin release and enhanced therapeutic outcome against multidrug resistance of cancer cells were systematically confirmed. In particular, the fabricated inorganic composite nanocapsules were found to feature unique biological behaviours, such as antimetastasis effect, extremely low hemolysis against red blood cells and high in vivo histocompatibility. This report on the successful construction of a pure inorganic nanosystem with multiple stimuli-responsivenesses may pave the way to new methods for the development of intelligent nanofamilies for cancer therapy.The construction of intelligent stimuli-responsive nanosystems can substantially improve the sensitivity/resolution/specificity of diagnostic imaging and enhance the therapeutic efficiency of chemotherapy for cancer treatment. This work reports on a generic construction strategy to achieve a multiple stimuli-responsive theranostic system for cancer simply by optimizing the chemical compositions of inorganic nanoplatforms to avoid the tedious and complicated synthetic procedure for traditional organic or organic/inorganic nanosystems. Based on the ``breaking up'' nature of manganese oxides and specific features of the carbonaceous framework to interact with aromatic drug molecules, manganese oxide nanoparticles were elaborately integrated into hollow mesoporous carbon nanocapsules by a simple in situ framework redox strategy to realize concurrent pH-sensitive T1-weighted magnetic resonance imaging (MRI) and pH-/HIFU-responsive on-demand drug release. The ultrasensitive disease-triggered MRI performance has been successfully demonstrated by a 52.5-fold increase of longitudinal relaxivity (r1 = 10.5 mM-1 s-1) and on nude mice 4T1 xenograft. The pH- and HIFU-triggered doxorubicin release and enhanced therapeutic outcome against multidrug resistance of cancer cells were systematically confirmed. In particular, the fabricated inorganic composite nanocapsules were found to feature unique biological behaviours, such as antimetastasis effect, extremely low hemolysis against red blood cells and high in vivo histocompatibility. This report on the successful construction of a pure inorganic nanosystem with multiple stimuli-responsivenesses may pave the way to new methods for the development of intelligent nanofamilies for cancer therapy. Electronic supplementary information (ESI) available: In vitro/in vivo ultrasound imaging, CLSM image and H&E results. See DOI: 10.1039/c5nr00451a

Analysis of construction injury burden by type of work.

PubMed

Lowery, J T; Glazner, J; Borgerding, J A; Bondy, J; Lezotte, D C; Kreiss, K

2000-04-01

To lay groundwork for identifying patterns of injury etiology, we sought to describe injury experience associated with types of work performed at construction sites by examining workers' compensation (WC) claims for the 32,081 construction workers who built Denver International Airport (DIA). Injury rates and WC payment rates were calculated for 25 types of work based on claims and payroll data reported to DIA's owner-controlled insurance program according to National Council on Compensation Insurance job classifications. By linking DIA claims with corresponding lost-work-time (LWT) claims filed with Colorado's Workers' Compensation Division, we were also able to obtain and examine both total and median lost days for each type of work. Injury experience varied widely among the types of construction work. Workers building elevators and conduits and installing glass, metal, or steel were at particularly high risk of both LWT and non-LWT injury. Median days lost by injured workers was highest (202 days) for driving/trucking. Median days lost for most types of work was much greater than previously reported for construction: 40 days or more for 18 of the 25 types of work analyzed. WC payment rates reflect both number and severity of injuries and were generally not significantly different from expected losses. They were, however, significantly higher than expected for driving/trucking, metal/steel installation, inspection/analysis, and elevator construction. Analysis of injury data by type of work allows targeting of safety resources to high risk construction work and would be useful in prospective surveillance at large construction sites with centrally administered workers' compensation plans. Copyright 2000 Wiley-Liss, Inc.

Testing Software Development Project Productivity Model

NASA Astrophysics Data System (ADS)

Lipkin, Ilya

Software development is an increasingly influential factor in today's business environment, and a major issue affecting software development is how an organization estimates projects. If the organization underestimates cost, schedule, and quality requirements, the end results will not meet customer needs. On the other hand, if the organization overestimates these criteria, resources that could have been used more profitably will be wasted. There is no accurate model or measure available that can guide an organization in a quest for software development, with existing estimation models often underestimating software development efforts as much as 500 to 600 percent. To address this issue, existing models usually are calibrated using local data with a small sample size, with resulting estimates not offering improved cost analysis. This study presents a conceptual model for accurately estimating software development, based on an extensive literature review and theoretical analysis based on Sociotechnical Systems (STS) theory. The conceptual model serves as a solution to bridge organizational and technological factors and is validated using an empirical dataset provided by the DoD. Practical implications of this study allow for practitioners to concentrate on specific constructs of interest that provide the best value for the least amount of time. This study outlines key contributing constructs that are unique for Software Size E-SLOC, Man-hours Spent, and Quality of the Product, those constructs having the largest contribution to project productivity. This study discusses customer characteristics and provides a framework for a simplified project analysis for source selection evaluation and audit task reviews for the customers and suppliers. Theoretical contributions of this study provide an initial theory-based hypothesized project productivity model that can be used as a generic overall model across several application domains such as IT, Command and Control, Simulation and etc... This research validates findings from previous work concerning software project productivity and leverages said results in this study. The hypothesized project productivity model provides statistical support and validation of expert opinions used by practitioners in the field of software project estimation.

Evaluating knowledge transfer practices among construction organization in Malaysia

NASA Astrophysics Data System (ADS)

Zaidi, Mohd Azian; Baharuddin, Mohd Nurfaisal; Bahardin, Nur Fadhilah; Yasin, Mohd Fadzil Mat; Nawi, Mohd Nasrun Mohd; Deraman, Rafikullah

2016-08-01

The aims of this paper is to identify a key dimension of knowledge transfer component to improve construction organization performance. It investigates the effectiveness of present knowledge transfer practices currently adopted by the Malaysian construction organizations and examines the relationship between knowledge transfer factors and organizational factors. A survey among 151 respondents including a different contractor registration grade was employed for the study. The survey shows that a seven-teen (17) factors known as creating shared awareness for information sharing, communication, personal skills,individual attitude,training, organizational culture, information technology,motivation, monitoring and supervision, service quality,information accessibility, information supply, socialization process,knowledge tools, coaching and monitoring, staff briefing and information sharing were identify as a key dimension for knowledge transfer success. This finding suggest that through improvement of each factor, the recognition of the whole strategic knowledge transfer process can be increase thus helping to strengthen the Malaysian construction organization for competitive advantages.

The Construction and Development of Indicators of Learning Organization at Higher Educational Institutions Emphasizing Graduate Production and Social Development

ERIC Educational Resources Information Center

Hanrin, Chanwit; Sri-Amphai, Pissamai; Ruangmontri, Karn; Namwan, Tharinthorn

2011-01-01

The Purposes of this research were to construct and develop indicators of learning organization at higher educational institutions emphasize graduate production and social development, and to test the congruence of the structural model of the indicators of learning organization at higher educational institutions emphasizing graduate production and…

Chassis organism from Corynebacterium glutamicum--a top-down approach to identify and delete irrelevant gene clusters.

PubMed

Unthan, Simon; Baumgart, Meike; Radek, Andreas; Herbst, Marius; Siebert, Daniel; Brühl, Natalie; Bartsch, Anna; Bott, Michael; Wiechert, Wolfgang; Marin, Kay; Hans, Stephan; Krämer, Reinhard; Seibold, Gerd; Frunzke, Julia; Kalinowski, Jörn; Rückert, Christian; Wendisch, Volker F; Noack, Stephan

2015-02-01

For synthetic biology applications, a robust structural basis is required, which can be constructed either from scratch or in a top-down approach starting from any existing organism. In this study, we initiated the top-down construction of a chassis organism from Corynebacterium glutamicum ATCC 13032, aiming for the relevant gene set to maintain its fast growth on defined medium. We evaluated each native gene for its essentiality considering expression levels, phylogenetic conservation, and knockout data. Based on this classification, we determined 41 gene clusters ranging from 3.7 to 49.7 kbp as target sites for deletion. 36 deletions were successful and 10 genome-reduced strains showed impaired growth rates, indicating that genes were hit, which are relevant to maintain biological fitness at wild-type level. In contrast, 26 deleted clusters were found to include exclusively irrelevant genes for growth on defined medium. A combinatory deletion of all irrelevant gene clusters would, in a prophage-free strain, decrease the size of the native genome by about 722 kbp (22%) to 2561 kbp. Finally, five combinatory deletions of irrelevant gene clusters were investigated. The study introduces the novel concept of relevant genes and demonstrates general strategies to construct a chassis suitable for biotechnological application. © 2014 The Authors. Biotechnology Journal published by Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim. This is an open access article under the terms of the Creative Commons Attribution-Non-Commercial-NoDerivs Licence, which permits use and distribution in any medium, provided the original work is properly cited, the use is non- commercial and no modifications or adaptations are made.

View-Based Organization and Interplay of Spatial Working and Long-Term Memories

PubMed Central

Röhrich, Wolfgang G.; Hardiess, Gregor; Mallot, Hanspeter A.

2014-01-01

Space perception provides egocentric, oriented views of the environment from which working and long-term memories are constructed. “Allocentric” (i.e. position-independent) long-term memories may be organized as graphs of recognized places or views but the interaction of such cognitive graphs with egocentric working memories is unclear. Here we present a simple coherent model of view-based working and long-term memories, together with supporting evidence from behavioral experiments. The model predicts that within a given place, memories for some views may be more salient than others, that imagery of a target square should depend on the location where the recall takes place, and that recall favors views of the target square that would be obtained when approaching it from the current recall location. In two separate experiments in an outdoor urban environment, pedestrians were approached at various interview locations and asked to draw sketch maps of one of two well-known squares. Orientations of the sketch map productions depended significantly on distance and direction of the interview location from the target square, i.e. different views were recalled at different locations. Further analysis showed that location-dependent recall is related to the respective approach direction when imagining a walk from the interview location to the target square. The results are consistent with a view-based model of spatial long-term and working memories and their interplay. PMID:25409437

DE-EE0006714 Final Report-Project Icebreaker™

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wagner, Lorry; Karpinski, David; Nagusky, Beth

Project Icebreaker, a 20 Megawatt offshore wind project 8 miles north of Cleveland, OH in Lake Erie, has been under development by the Lake Erie Energy Development Corporation since 2009. Significant development efforts were completed prior to the award of DE-EE0006714 (December 2014). This report describes the status of the work performed under award DE-EE0006714. The work was organized into several categories or tasks. The report presents the status of that work in each of eleven (11) main tasks: 1) State and Federal Permits; 2) Mono Bucket Foundation Engineering; 3) Construction and Installation Engineering; 4) Cable Route Survey; 5) Electricalmore » System Design; 6) Power Off-take; 7) Project Costs and Risk Management; 8) Operations and Maintenance Planning; 9) Domestic Supply Chain Development; 10) Instrumentation Planning; and 11) Department of Energy Review.« less

10 CFR 2.104 - Notice of hearing.

Code of Federal Regulations, 2012 CFR

2012-01-01

... work authorization, construction permit, early site permit, or combined license for a facility of the... work authorization, construction permit, early site permit, or combined license for a facility of the... hearing concerning an application for a limited work authorization, construction permit, early site permit...

Oriented Covalent Organic Framework Film on Graphene for Robust Ambipolar Vertical Organic Field-Effect Transistor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sun, Bing; Zhu, Chen-Hui; Liu, Yi

Periodically eclipsed π-stacking columns in two-dimensional covalent organic frameworks (2D COFs) could function as direct channel paths for charge carrier transport. Incorporating a welldefined 2D COF into organic electronic devices, however, is still a challenge. Herein, we reported the solvothermal synthesis of a COF TFPy-PPDA film on single layer graphene (SLG), which was constructed via covalent imine-type linkage by employing 1,3,6,8-tetrakis(p-formylphenyl)pyrene (TFPy) and p-phenylenediamine (PPDA) as building blocks. A vertical field-effect transistor (VFET) based on the heterostructure of COF TFPy-PPDA film and SLG shows ambipolar charge carrier behavior under lower modulating voltages. Work-function-tunable contact between SLG and COFTFPy-PPDA film andmore » suitable injection barriers of charge carriers lead to the ambipolar transport with high current density on/off ratio (>10 5) and high on-current density (>4.1 Acm -2). Interfacing 2D COF with graphene for VFET could shed the promising application prospect of 2D COFs in organic electronics and optoelectronics.« less

Oriented Covalent Organic Framework Film on Graphene for Robust Ambipolar Vertical Organic Field-Effect Transistor

DOE PAGES

Sun, Bing; Zhu, Chen-Hui; Liu, Yi; ...

2017-04-13

Periodically eclipsed π-stacking columns in two-dimensional covalent organic frameworks (2D COFs) could function as direct channel paths for charge carrier transport. Incorporating a welldefined 2D COF into organic electronic devices, however, is still a challenge. Herein, we reported the solvothermal synthesis of a COF TFPy-PPDA film on single layer graphene (SLG), which was constructed via covalent imine-type linkage by employing 1,3,6,8-tetrakis(p-formylphenyl)pyrene (TFPy) and p-phenylenediamine (PPDA) as building blocks. A vertical field-effect transistor (VFET) based on the heterostructure of COF TFPy-PPDA film and SLG shows ambipolar charge carrier behavior under lower modulating voltages. Work-function-tunable contact between SLG and COFTFPy-PPDA film andmore » suitable injection barriers of charge carriers lead to the ambipolar transport with high current density on/off ratio (>10 5) and high on-current density (>4.1 Acm -2). Interfacing 2D COF with graphene for VFET could shed the promising application prospect of 2D COFs in organic electronics and optoelectronics.« less

[Organizational recommendations for day surgery].

PubMed

Bontemps, Gilles

2014-03-01

In France, the delayed development of day surgery compared to other countries led the ANAP and the HAS in 2011 to enter into a joint work program to provide some reference guide for hospitals to change their practices to outpatient. In this context, organizational guidelines and operational tools were published in May 2013. The method of construction of the recommendations resulting from an original work that combined a three-fold approach: field vision by identifying the highlights of 15 hospitals selected for their representative performance and analyzing the risks of five voluntary hospitals, mobilization organizational theories from the social sciences, using 53 professional experts. The work concluded on 16 organizational recommendations under four forms (basic principles, strategic elements, operational elements and perspectives). These recommendations are accompanied by tools and guides diagnosis and implementation, as well as productions for further reflection. These organizational recommendations confirmed the specificity of day surgery, which is not related to the act, but to the organization, management and optimization of different flows of a hospital (patient flow, professional flows, logistical, informational…). The performance of a day surgery organization is linked to its ability to control its flow and anticipation. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

[ORGANIZATIONAL COMMITMENT AND WORK ENGAGEMENT - THEORETICAL CONCEPTIONS AND TERMINOLOGICAL PROBLEMS].

PubMed

Łaguna, Mariola; Mielniczuk, Emilia; Żaliński, Adam; Wałachowska, Karolina

2015-01-01

Engagement in professional activities and positive attitudes towards an organization are of significant importance to functioning and health of employees. Studies analysing the phenomena of employees' engagement and their relations with an organization undergo a dynamic development in both international and Polish research. Two theoretical conceptions: organizational commitment (by Meyer and Allen) and work engagement (by Schaufeli and Bakker) have become prominent in the field. They capture 2 similar, albeit distinct constructs. In English-language journals academics concentrate on theoretical and empirical analyses of similarities and differences between the 2 concepts, while in Polish publications scholars also have to deal with the issue of the original term translation. The problem lies mostly in Polish nomenclature of the dimensions proposed in both of these conceptions. Lack of common translations for different studies may cause confusion in this area of research. In the paper authors present a review of Polish translations of terms used in the discussed conceptions and a linguistic analysis of terms, both in English and in Polish. Authors provide solutions which could help to clarify terminology in Polish-language publications concerning organizational commitment and work engagement. This allows for further development of research in this field.

Outbreak of legionnaires' disease from a cooling water system in a power station.

PubMed

Morton, S; Bartlett, C L; Bibby, L F; Hutchinson, D N; Dyer, J V; Dennis, P J

1986-09-01

In September and October 1981 six cases of pneumonia occurred among men working in a power station under construction. Three were identified as cases of legionella pneumonia and two others had serology suggestive of legionella infection. In a sample of 92 men from the site 10 had low levels of antibodies to legionella; a similar sample of men working on an adjacent site showed none with positive serology. In a case control study it was found that cases of pneumonia were more likely than controls to have worked on a part of the site where four small capacity cooling towers were located. Legionella pneumophila serogroup 1 was isolated from the water systems of these four towers but was not found in samples from any other cooling towers or hot or cold water outlets on the site. It would appear that there was airborne spread of the organism from these cooling water systems which had not received conventional treatment to inhibit corrosion and organic growth. This is the first outbreak of legionnaires' disease to be recorded in an industrial setting in the United Kingdom. No cases of legionella infection have occurred on the site since the introduction of control measures.

Making Work: Demonstrating Thermodynamic Concepts with Solar-Powered Wax and Rubber Heat Engines

ERIC Educational Resources Information Center

Appleyard, S. J.

2007-01-01

Construction details are provided for simple heat engines that use candle wax and elastomers as working substances. The engines are constructed using common household materials and can be easily constructed in a school classroom or at home. They work reliably and are useful tools for demonstrating the conversion of heat to mechanical work. They…

Trade associations and labor organizations as intermediaries for disseminating workplace safety and health information.

PubMed

Okun, Andrea H; Watkins, Janice P; Schulte, Paul A

2017-09-01

There has not been a systematic study of the nature and extent to which business and professional trade associations and labor organizations obtain and communicate workplace safety and health information to their members. These organizations can serve as important intermediaries and play a central role in transferring this information to their members. A sample of 2294 business and professional trade associations and labor organizations in eight industrial sectors identified by the National Occupational Research Agenda was surveyed via telephone. A small percent of these organizations (40.9% of labor organizations, 15.6% of business associations, and 9.6% of professional associations) were shown to distribute workplace safety and health information to their members. Large differences were also observed between industrial sectors with construction having the highest total percent of organizations disseminating workplace safety and health information. There appears to be significant potential to utilize trade and labor organizations as intermediaries for transferring workplace safety and health information to their members. Government agencies have a unique opportunity to partner with these organizations and to utilize their existing communication channels to address high risk workplace safety and health concerns. Published 2017. This article is a U.S. Government work and is in the public domain in the USA.

Understanding Care Integration from the Ground Up: Five Organizing Constructs that Shape Integrated Practices.

PubMed

Cohen, Deborah J; Balasubramanian, Bijal A; Davis, Melinda; Hall, Jennifer; Gunn, Rose; Stange, Kurt C; Green, Larry A; Miller, William L; Crabtree, Benjamin F; England, Mary Jane; Clark, Khaya; Miller, Benjamin F

2015-01-01

To provide empirical evidence on key organizing constructs shaping practical, real-world integration of behavior health and primary care to comprehensively address patients' medical, emotional, and behavioral health needs. In a comparative case study using an immersion-crystallization approach, a multidisciplinary team analyzed data from observations of practice operations, interviews, and surveys of practice members, and implementation diaries. Practices were drawn from 2 studies of practices attempting to integrate behavioral health and primary care: Advancing Care Together, a demonstration project of 11 practices located in Colorado, and the Integration Workforce Study, a study of 8 practices across the United States. We identified 5 key organizing constructs influencing integration of primary care and behavioral health: 1) Integration REACH (the extent to which the integration program was delivered to the identified target population), 2) establishment of continuum of care pathways addressing the location of care across the range of patient's severity of illness, 3) approach to patient transitions: referrals or warm handoffs, 4) location of the integration workforce, and 5) participants' mental model for integration. These constructs intertwine within an organization's historic and social context to produce locally adapted approaches to integrating care. Contextual factors, particularly practice type, influenced whether specialty mental health and substance use services were colocated within an organization. Interaction among 5 organizing constructs and practice context produces diverse expressions of integrated care. These constructs provide a framework for understanding how primary care and behavioral health services can be integrated in routine practice. © Copyright 2015 by the American Board of Family Medicine.

Towards organ printing: engineering an intra-organ branched vascular tree

PubMed Central

Visconti, Richard P; Kasyanov, Vladimir; Gentile, Carmine; Zhang, Jing; Markwald, Roger R; Mironov, Vladimir

2013-01-01

Importance of the field Effective vascularization of thick three-dimensional engineered tissue constructs is a problem in tissue engineering. As in native organs, a tissue-engineered intra-organ vascular tree must be comprised of a network of hierarchically branched vascular segments. Despite this requirement, current tissue-engineering efforts are still focused predominantly on engineering either large-diameter macrovessels or microvascular networks. Areas covered in this review We present the emerging concept of organ printing or robotic additive biofabrication of an intra-organ branched vascular tree, based on the ability of vascular tissue spheroids to undergo self-assembly. What the reader will gain The feasibility and challenges of this robotic biofabrication approach to intra-organ vascularization for tissue engineering based on organ-printing technology using self-assembling vascular tissue spheroids including clinically relevantly vascular cell sources are analyzed. Take home message It is not possible to engineer 3D thick tissue or organ constructs without effective vascularization. An effective intra-organ vascular system cannot be built by the simple connection of large-diameter vessels and microvessels. Successful engineering of functional human organs suitable for surgical implantation will require concomitant engineering of a ‘built in’ intra-organ branched vascular system. Organ printing enables biofabrication of human organ constructs with a ‘built in’ intra-organ branched vascular tree. PMID:20132061

Inspection of Construction Works According to Polish Construction Law

NASA Astrophysics Data System (ADS)

Czemplik, A.

2015-11-01

Construction regulations are still different in many European countries, even though the European Union directives have unified many acts for construction works and construction products in the member countries. The scheme of the construction process presented in the paper could be valid for most countries, despite of detailed regulations of legal systems. The number of construction regulations to be followed in order to get the Construction Permit in Poland is rather big, so the time between the start of the investment process and the day when the Construction Permit is issued could be several months. Only licensed professional engineers can play the role of site managers, site inspectors and designers, registered for the given construction project. Duties and responsibilities (civil liability) of these engineers are strictly defined by regulations. The obligatory inspection of construction works should be executed by the licensed site inspectors. Moreover, the works can be incidentally inspected by Authority, banks, insurance companies or designers. Foreign designers and foreign site engineers in order to be allowed by respective Authority to play official roles on Polish construction sites should present documents proving that they can do the same jobs in their countries as per regulations obligatory there.

Work Related Psychosocial and Organizational Factors for Neck Pain in Workers in the United States

PubMed Central

Yang, Haiou; Hitchcock, Edward; Haldeman, Scott; Swanson, Naomi; Lu, Ming-Lun; Choi, BongKyoo; Nakata, Akinori; Baker, Dean

2016-01-01

Background Neck pain is a prevalent musculoskeletal condition among workers in the United States. This study explores a set of workplace psychosocial and organization-related factors for neck pain. Methods Data used for this study comes from the 2010 National Health interview Survey which provides a representative sample of the US population. To account for the complex sampling design, the Taylor linearized variance estimation method was used. Logistic regression models were constructed to measure the associations. Results This study demonstrated significant associations between neck pain and a set of workplace risk factors including work-family imbalance, exposure to a hostile work environment and job insecurity, non-standard work arrangements, multiple jobs and long work hours. Conclusion Workers with neck pain may benefit from intervention programs that address issues related to these workplace risk factors. Future studies exploring both psychosocial risk factors and physical risk factors with a longitudinal design will be important. PMID:27184340

Reconstruction of gas distribution pipelines in MOZG in Poland using PE and PA pipes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Borowicz, W.; Podziemski, T.; Kramek, E.

1996-12-31

MOZG--Warsaw Regional Gas Distribution Company was established in 1856. Now it is one of six gas distribution companies in Poland. Due to steadily increasing safety demands, some of the pipelines will need reconstruction. The majority of the substandard piping is located in urban areas. The company wanted to gain experiences in applying reconstruction technologies using two different plastic materials polyethylene and polyamide. They also wanted to assess the technical and economic practicalities of performing relining processes. A PE project--large diameter polyethylene relining (450 mm) conducted in Warsaw in 1994/95 and PA projects--relining using polyamide pipes, projects conducted in Radom andmore » in Warsaw during 1993 and 1994 are the most interesting and representative for this kind of works. Thanks to the experience obtained whilst carrying out these projects, reconstruction of old gas pipelines has become routine. Now they often use polyethylene relining of smaller diameters and they continue both construction and reconstruction of gas network using PA pipes. This paper presents the accumulated knowledge showing the advantages and disadvantages of applied methods. It describes project design and implementation with details and reports on the necessary preparation work, on site job organization and the most common problems arising during the construction works.« less

HDU Pressurized Excursion Module (PEM) Prototype Systems Integration

NASA Technical Reports Server (NTRS)

Gill, Tracy R.; Kennedy, Kriss; Tri, Terry; Toups, Larry; Howe, A. Scott

2010-01-01

The Habitat Demonstration Unit (HDU) project team constructed an analog prototype lunar surface laboratory called the Pressurized Excursion Module (PEM). The prototype unit subsystems were integrated in a short amount of time, utilizing a skunk-works approach that brought together over 20 habitation-related technologies from a variety of NASA centers. This paper describes the system integration strategies and lessons learned, that allowed the PEM to be brought from paper design to working field prototype using a multi-center team. The system integration process included establishment of design standards, negotiation of interfaces between subsystems, and scheduling fit checks and installation activities. A major tool used in integration was a coordinated effort to accurately model all the subsystems using CAD, so that conflicts were identified before physical components came together. Some of the major conclusions showed that up-front modularity that emerged as an artifact of construction, such as the eight 45 degree "pie slices" making up the module whose steel rib edges defined structural mounting and loading points, dictated much of the configurational interfaces between the major subsystems and workstations. Therefore, 'one of the lessons learned included the need to use modularity as a tool for organization in advance, and to work harder to prevent non-critical aspects of the platform from dictating the modularity that may eventually inform the fight system.

Modern Methods of Reconstruction of the Sacral Objects - Example of the Jasna Gora Monastery in Czestochowa, Poland

NASA Astrophysics Data System (ADS)

Kazhar, Nina

2017-10-01

This publication is devoted to the problem of preservation and restoration of the architectural monument as an element of the historical environment. The notion of “immovable monument of history and culture” is specified. Modern methods of restoration and repair-conservatory works are analyzed. The main principles of complex studies of monument buildings are considered taking into account their interactions with the environment. The necessity of assessing the physical state of structures and materials of the architectural monument for selecting the optimal technology for repair work, preserving the historical and cultural landscape is shown. A brief history of the construction and repair of the monastery at Jasna Gora in Czestochowa (Poland) is presented. The restoration of the Jasna Gora ensemble was a complex kind of construction work: repair, conservation, consolidation and renovation of architectural monuments. The ground and underground structures of the main buildings and structures have been restored and strengthened. The program of restoration work on the task “Complex restoration of the building of the monastery of the Paulin Fathers on Jasna Gora” (2004-2013) included three stages: 1. “Reconstruction and restoration of the buildings of the monastery of the Paulin Fathers on Jasna Gora” (2007-2010), 2. “Conservation and renovation of the building of the Basilica of the Holy Cross and the Nativity of the Virgin” (2007-2012), 3. “Renovation of the North curtain - the entrance to the territory of the monastery of the Paulin Fathers on Jasna Gora” (2013). Restoration was based on a thorough examination of the monument and aimed to maximally preserve the historical, constructive and artistic features of the monastery complex, ensure its long existence. In addition to preserving the historical, technical and artistic qualities of the ensemble of the monastery, the tasks of organizing the environmental monument were resolved. Completed comprehensive repair and restoration works contribute to strengthening the structures of the restored buildings, provide harmonization of the historic and new landscapes of Jasna Gora.

48 CFR 922.804-2 - Construction.

Code of Federal Regulations, 2011 CFR

2011-10-01

... subcontractors for work to be performed in the specified geographical areas. (b) Other nonexempt construction... affirmative action steps to be taken by the offeror in connection with all work under the contract. Such... each craft involved in the performance of the contract work. All solicitations for construction...

46 CFR 160.053-3 - Materials, construction and workmanship.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Work Vests, Unicellular Plastic... workmanship of unicellular plastic foam work vests specified by this subpart shall conform to the requirements.... All components used in the construction of work vests must meet the applicable requirements of subpart...

46 CFR 160.053-3 - Materials, construction and workmanship.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Work Vests, Unicellular Plastic... workmanship of unicellular plastic foam work vests specified by this subpart shall conform to the requirements.... All components used in the construction of work vests must meet the applicable requirements of subpart...

46 CFR 160.053-3 - Materials, construction and workmanship.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Work Vests, Unicellular Plastic... workmanship of unicellular plastic foam work vests specified by this subpart shall conform to the requirements.... All components used in the construction of work vests must meet the applicable requirements of subpart...

Development of a group work assessment pedagogy using constructive alignment theory.

PubMed

Croy, Suzanne R

2018-02-01

The purpose of this paper is to explore group work assessment underpinned by constructive alignment theory to develop a new assessment pedagogy. A review was undertaken of an existing module 'Mental Health Nursing 1', with student nurses participating in the BSc (Hons) Nursing Programme. Constructive alignment theory requires teachers to adopt a deep approach to learning where module learning outcomes are aligned with the teaching environment and modes of assessment. As the module progressed, reviewing the Mental Health Nursing 1 module became an excellent opportunity to begin to understand how constructive alignment theory can inform a group work assessment pedagogy. Working using a constructively aligned assessment process became a valuable learning experience for the module leader whilst at the same time revealed a gap in the research around the impact of constructively aligned teaching and group work assessment. Copyright © 2017 Elsevier Ltd. All rights reserved.

Comparative study of graphene and its derivative materials as an electrode in OLEDs

NASA Astrophysics Data System (ADS)

Srivastava, Anshika; Kumar, Brijesh

2018-04-01

In current scenario, the organic materials have given a revolutionary evolution in the electronics industry. As, the organic light emitting diodes (OLEDs) have almost replaced the conventional technologies due to the use of organic based materials. However, the next generations OLEDs are intensively desired nowadays for high definition display technology. There are various concern involved in the successful design of OLEDs. Electrodes are one of the electrical conductors, which play a vital role in the construction of OLEDs. The performance of OLED is majorly affected by the material used for electrodes. Due to the requirement of transparent, flexible and inexpensive anodes in bottom emissive OLEDs, ITO was replaced by graphene material. Graphene is a single layer 2-dimensional transparent carbon allotrope which showed prodigious potential to escalate the device performance. Although graphene demonstrated impressive characteristics in various applications, it showed unfavorable work function for many other devices. Thus, derivative materials of graphene such as graphene oxide, graphane and β - graphdiyne were synthesized by several researchers. By comparing graphene and its derivatives as an anode of OLEDs, it has been found that graphene oxide showed the preeminent performance among all. In this paper, all the comparisons are investigated by using a standard device constructed by piling layers of anode/ m_MTDATA/ NPB/ Alq3: QAD/ Alq3/ cathode in TCAD ATLAS device simulator.

Synthetic biology of cyanobacteria: unique challenges and opportunities

PubMed Central

Berla, Bertram M.; Saha, Rajib; Immethun, Cheryl M.; Maranas, Costas D.; Moon, Tae Seok; Pakrasi, Himadri B.

2013-01-01

Photosynthetic organisms, and especially cyanobacteria, hold great promise as sources of renewably-produced fuels, bulk and specialty chemicals, and nutritional products. Synthetic biology tools can help unlock cyanobacteria's potential for these functions, but unfortunately tool development for these organisms has lagged behind that for S. cerevisiae and E. coli. While these organisms may in many cases be more difficult to work with as “chassis” strains for synthetic biology than certain heterotrophs, the unique advantages of autotrophs in biotechnology applications as well as the scientific importance of improved understanding of photosynthesis warrant the development of these systems into something akin to a “green E. coli.” In this review, we highlight unique challenges and opportunities for development of synthetic biology approaches in cyanobacteria. We review classical and recently developed methods for constructing targeted mutants in various cyanobacterial strains, and offer perspective on what genetic tools might most greatly expand the ability to engineer new functions in such strains. Similarly, we review what genetic parts are most needed for the development of cyanobacterial synthetic biology. Finally, we highlight recent methods to construct genome-scale models of cyanobacterial metabolism and to use those models to measure properties of autotrophic metabolism. Throughout this paper, we discuss some of the unique challenges of a diurnal, autotrophic lifestyle along with how the development of synthetic biology and biotechnology in cyanobacteria must fit within those constraints. PMID:24009604

Rapid recognition of volatile organic compounds with colorimetric sensor arrays for lung cancer screening.

PubMed

Zhong, Xianhua; Li, Dan; Du, Wei; Yan, Mengqiu; Wang, You; Huo, Danqun; Hou, Changjun

2018-06-01

Volatile organic compounds (VOCs) in breath can be used as biomarkers to identify early stages of lung cancer. Herein, we report a disposable colorimetric array that has been constructed from diverse chemo-responsive colorants. Distinguishable difference maps were plotted within 4 min for specifically targeted VOCs. Through the consideration of various chemical interactions with VOCs, the arrays successfully discriminate between 20 different volatile organic compounds in breath that are related to lung cancer. VOCs were identified either with the visualized difference maps or through pattern recognition with an accuracy of at least 90%. No uncertainties or errors were observed in the hierarchical cluster analysis (HCA). Finally, good reproducibility and stability of the array was achieved against changes in humidity. Generally, this work provides fundamental support for construction of simple and rapid VOC sensors. More importantly, this approach provides a hypothesis-free array method for breath testing via VOC profiling. Therefore, this small, rapid, non-invasive, inexpensive, and visualized sensor array is a powerful and promising tool for early screening of lung cancer. Graphical abstract A disposable colorimetric array has been developed with broadly chemo-responsive dyes to incorporate various chemical interactions, through which the arrays successfully discriminate 20 VOCs that are related to lung cancer via difference maps alone or chemometrics within 4 min. The hydrophobic porous matrix provides good stability against changes in humidity.

Geometric Modeling of Construction Communications with Specified Dynamic Properties

NASA Astrophysics Data System (ADS)

Korotkiy, V. A.; Usmanova, E. A.; Khmarova, L. I.

2017-11-01

Among many construction communications the pipelines designed for the organized supply or removal of liquid or loose working bodies are distinguished for their functional purpose. Such communications should have dynamic properties which allow one to reduce losses on friction and vortex formation. From the point of view of geometric modeling, the given dynamic properties of the projected communication mean the required degree of smoothness of its center line. To model the axial line (flat or spatial), it is proposed to use composite curve lines consisting of the curve arcs of the second order or from their quadratic images. The advantage of the proposed method is that the designer gets the model of a given curve not as a set of coordinates of its points but in the form of a matrix of coefficients of the canonical equations for each arc.

How organizational context affects bioethical decision-making: pharmacists' management of gatekeeping processes in retail and hospital settings.

PubMed

Chiarello, Elizabeth

2013-12-01

Social science studies of bioethics demonstrate that ethics are highly contextual, functioning differently across local settings as actors make daily decisions "on the ground." Sociological studies that demonstrate the key role organizations play in shaping ethical decision-making have disproportionately focused on physicians and nurses working in hospital settings where they contend with life and death issues. This study broadens our understanding of the contexts of ethical decision-making by empirically examining understudied healthcare professionals - pharmacists - working in two organizational settings, retail and hospital, where they act as gatekeepers to regulated goods and services as they contend with ethical issues ranging from the serious to the mundane. This study asks: How do organizations shape pharmacists' identification, negotiation, and resolution of ethical challenges; in other words, how do organizations shape pharmacists' gatekeeping processes? Based on 95 semi-structured interviews with U.S. pharmacists practicing in retail and hospital pharmacies conducted between September 2009 and May 2011, this research finds that organizations influence ethical decision-making by shaping how pharmacists construct four gatekeeping processes: medical, legal, fiscal, and moral. Each gatekeeping process manifests differently across organizations due to how these settings structure inter-professional power dynamics, proximity to patients, and means of accessing information. Findings suggest new directions for theorizing about ethical decision-making in medical contexts by drawing attention to new ethical actors, new organizational settings, an expanded definition of ethical challenges, and a broader conceptualization of gatekeeping. Copyright © 2012 Elsevier Ltd. All rights reserved.

Construction of In Vivo Fluorescent Imaging of Echinococcus granulosus in a Mouse Model.

PubMed

Wang, Sibo; Yang, Tao; Zhang, Xuyong; Xia, Jie; Guo, Jun; Wang, Xiaoyi; Hou, Jixue; Zhang, Hongwei; Chen, Xueling; Wu, Xiangwei

2016-06-01

Human hydatid disease (cystic echinococcosis, CE) is a chronic parasitic infection caused by the larval stage of the cestode Echinococcus granulosus. As the disease mainly affects the liver, approximately 70% of all identified CE cases are detected in this organ. Optical molecular imaging (OMI), a noninvasive imaging technique, has never been used in vivo with the specific molecular markers of CE. Thus, we aimed to construct an in vivo fluorescent imaging mouse model of CE to locate and quantify the presence of the parasites within the liver noninvasively. Drug-treated protoscolices were monitored after marking by JC-1 dye in in vitro and in vivo studies. This work describes for the first time the successful construction of an in vivo model of E. granulosus in a small living experimental animal to achieve dynamic monitoring and observation of multiple time points of the infection course. Using this model, we quantified and analyzed labeled protoscolices based on the intensities of their red and green fluorescence. Interestingly, the ratio of red to green fluorescence intensity not only revealed the location of protoscolices but also determined the viability of the parasites in vivo and in vivo tests. The noninvasive imaging model proposed in this work will be further studied for long-term detection and observation and may potentially be widely utilized in susceptibility testing and therapeutic effect evaluation.

A Body of Work Standard-Setting Method with Construct Maps

ERIC Educational Resources Information Center

Wyse, Adam E.; Bunch, Michael B.; Deville, Craig; Viger, Steven G.

2014-01-01

This article describes a novel variation of the Body of Work method that uses construct maps to overcome problems of transparency, rater inconsistency, and scores gaps commonly occurring with the Body of Work method. The Body of Work method with construct maps was implemented to set cut-scores for two separate K-12 assessment programs in a large…

The new Intragroup Conflict Scale: testing and psychometric properties.

PubMed

Cox, Kathleen B

2014-01-01

The importance of healthy work environments has received attention. Health care organizations are plagued with conflict which is detrimental to work environments. Thus, conflict must be studied. The purpose of this article is to describe the testing of a measure of conflict. A survey was used to evaluate the psychometric properties. The sample consisted of 430 nurses at an academic medical center. Using principal component analysis (PCA) with varimax rotation, a six-factor solution (30 items) that explained 74.3% of variance emerged. Coefficient alpha ranged from .95 to .81. Correlations with existing scales supported construct validity (r = -.32(-)-.58). The results are encouraging. Use of the scale may provide insight into the impact of conflict on patient, staff, and organizational outcomes.

[Mercosur's regional health agenda: architecture and themes].

PubMed

Queiroz, Luisa Guimaraes; Giovanella, Ligia

2011-08-01

This article describes the shaping of institutional health spaces in the Mercosur, with analysis of themes and results and considerations on the construction of the regional agenda and on the effects of regional economic integration processes on health policies and systems. We discuss the organization, operation, focus topics, and results achieved in specific health forums (Meeting of Ministers of Health and Sub-Working Group 11), seeking to analyze the architecture and issues addressed by the regional agenda and drawing parallels with the European experience. The aim of this reflection is to identify how the work done by Mercosur structures contributes to building a regional agenda, with the expectation that the integration can contribute to reducing inequalities in access to health care in the region.

Psychometric properties of a Chinese translation of the political skill inventory.

PubMed

Shi, Junqi; Chen, Zhuo

2012-02-01

Ferris and colleagues defined political skill in organizations as "the ability to effectively understand others at work and to use such knowledge to influence others to act in ways that enhance one's personal and/or organizational objectives." In this study, the psychometric properties of a Chinese translation of the Political Skill Inventory were investigated, supporting construct, convergent, discriminant, and criterion validities. The results suggested that the Chinese translation retained a four-factor structure. Political skill was positively correlated with self-monitoring, conscientiousness, political savvy, emotional intelligence, extraversion, agreeableness, and proactive personality, and was negatively correlated with trait anxiety and external locus of control. After controlling for age, sex, and job tenure, political skill was predictive of task performance, work contribution, and interpersonal help.

Ohio Construction Technologies Competency Profile.

ERIC Educational Resources Information Center

Miller, Lavonna; Bowermeister, Bob

This document, which lists construction technologies competencies as identified by representatives from government agencies and labor organizations as well as secondary and postsecondary educators throughout Ohio, is intended to assist individuals and organizations in developing both college tech prep programs and apprenticeship training/education…

Healthcare workplace conversations on race and the perspectives of physicians of African descent.

PubMed

Nunez-Smith, Marcella; Curry, Leslie A; Berg, David; Krumholz, Harlan M; Bradley, Elizabeth H

2008-09-01

Although experts recommend that healthcare organizations create forums for honest dialogue about race, there is little insight into the physician perspectives that may influence these conversations across the healthcare workforce. To identify the range of perspectives that might contribute to workplace silence on race and affect participation in race-related conversations within healthcare settings. In-person, in-depth, racially concordant qualitative interviews. Twenty-five physicians of African descent practicing in the 6 New England states. Line-by-line independent coding and group negotiated consensus to develop codes structure using constant comparative method. Five themes characterize perspectives of participating physicians of African descent that potentially influence race-related conversations at work: 1) Perceived race-related healthcare experiences shape how participating physicians view healthcare organizations and their professional identities prior to any formal medical training; 2) Protecting racial/ethnic minority patients from healthcare discrimination is a top priority for participating physicians; 3) Participating physicians often rely on external support systems for race-related issues, rather than support systems inside the organization; 4) Participating physicians perceive differences between their interpretations of potentially offensive race-related work experiences and their non-minority colleagues' interpretations of the same experiences; and 5) Participating physicians are uncomfortable voicing race-related concerns at work. Creating a healthcare work environment that successfully supports diversity is as important as recruiting diversity across the workforce. Developing constructive ways to discuss race and race relations among colleagues in the workplace is a key step towards creating a supportive environment for employees and patients from all backgrounds.

Healthcare Workplace Conversations on Race and the Perspectives of Physicians of African Descent

PubMed Central

Curry, Leslie A.; Berg, David; Krumholz, Harlan M.; Bradley, Elizabeth H.

2008-01-01

Background Although experts recommend that healthcare organizations create forums for honest dialogue about race, there is little insight into the physician perspectives that may influence these conversations across the healthcare workforce. Objective To identify the range of perspectives that might contribute to workplace silence on race and affect participation in race-related conversations within healthcare settings. Design In-person, in-depth, racially concordant qualitative interviews. Participants Twenty-five physicians of African descent practicing in the 6 New England states. Approach Line-by-line independent coding and group negotiated consensus to develop codes structure using constant comparative method. Main Results Five themes characterize perspectives of participating physicians of African descent that potentially influence race-related conversations at work: 1) Perceived race-related healthcare experiences shape how participating physicians view healthcare organizations and their professional identities prior to any formal medical training; 2) Protecting racial/ethnic minority patients from healthcare discrimination is a top priority for participating physicians; 3) Participating physicians often rely on external support systems for race-related issues, rather than support systems inside the organization; 4) Participating physicians perceive differences between their interpretations of potentially offensive race-related work experiences and their non-minority colleagues’ interpretations of the same experiences; and 5) Participating physicians are uncomfortable voicing race-related concerns at work. Conclusions Creating a healthcare work environment that successfully supports diversity is as important as recruiting diversity across the workforce. Developing constructive ways to discuss race and race relations among colleagues in the workplace is a key step towards creating a supportive environment for employees and patients from all backgrounds. PMID:18618190

Geometric modeling of controlled third-class hinged mechanisms with a stand in one extreme position for cyclic automatic machines

NASA Astrophysics Data System (ADS)

Khomchenko, V. G.; Varepo, L. G.; Glukhov, V. I.; Krivokhatko, E. A.

2017-06-01

The geometric model for the synthesis of third-class lever mechanisms is proposed, which allows, by changing the length of the auxiliary link and the position of its fixed hinge, to rearrange the movement of the working organ onto the cyclograms with different predetermined dwell times. It is noted that with the help of the proposed model, at the expense of the corresponding geometric constructions, the best uniform Chebyshev approximation can be achieved at the interval of the standstill.

Stop, Collaborate, and Listen: Lessons Learned from Collaborating with a Houston Environmental Justice Organization

NASA Astrophysics Data System (ADS)

Johnson, C.; Arellano, Y.; Phartiyal, P.

2016-12-01

Scientists are increasingly showing interest in conducting research at the community level, yet community groups often struggle with lack of access to scientific information. Collaborations between the two are mutually beneficial: scientists can include assessment of societal implications in their research, and community-specific scientific evidence can be used by local groups to inform public decisions that benefit community interests. Recognizing the need for and utility of such partnerships, the Center for Science and Democracy at the Union of Concerned Scientists, a science-based policy and advocacy organization, partnered with Texas Environmental Justice Advocacy Services (TEJAS), an environmental justice organization based in Manchester in Houston, to provide the technical support and resources needed to strengthen TEJAS' advocacy work. Working closely with TEJAS, we connected community members with local experts, developed educational products to inform community members about environmental health risks in their neighborhoods, published a report highlighting chemical safety issues in the community, and assisted in constructing a community survey to assess residents' health concerns. The products were created with the intention of raising the profile of these issues with local government and regional EPA officials. This talk will discuss the projects done in collaboration with TEJAS, as well as important lessons learned that offer insight into best practices for other organizations and technical experts to partner with community groups on local projects.

The organizational transformative power of nurse residency programs.

PubMed

Kramer, Marlene; Maguire, Pat; Halfer, Diana; Budin, Wendy C; Hall, Debra S; Goodloe, Lauren; Klaristenfeld, Jessica; Teasley, Susan; Forsey, Lynn; Lemke, Johanna

2012-01-01

Residency programs for newly licensed registered nurses (NLRNs) have been strongly advocated by the Institute of Medicine, American Organization of Nurse Executives, and other professional organizations. Their cost-effectiveness as well as their impact on NLRN retention, job and practice satisfaction, improved performance, and reduction in environmental reality shock has been demonstrated. This qualitative study sought answers to the question: what people, components, processes and activities of Nurse Residency Programs (NRPs), and the work environment are instrumental in the transition and integration of NLRNs into the professional practice role and into professional communities? In the course of interviewing 907 nurses-NLRNs, experienced nurses, managers, and educators-practicing on clinical units with confirmed "very healthy work environments" in 20 Magnet hospitals, it became evident that not only did NRPs positively impact the professional socialization of NLRNs, they led to transformative changes in the organization and in the practice of other health care professionals. The organizational transformative changes described by the interviewees are presented for each of the 7 major challenges identified by NLRNs-delegation, prioritization, managing patient care delivery, autonomous decision-making, collaboration with other disciplines, constructive conflict resolution, and utilizing feedback to restore self-confidence. If it can be demonstrated that these transformative changes stimulated by NRPs also lead to improved patient outcomes, NRPs may be the most significant organization transformation instituted by nurse leaders in recent years.

[Current situation of human resources of parasitic disease control and prevention organizations in Henan Province].

PubMed

Ya-Lan, Zhang; Yan-Kun, Zhu; Wei-Qi, Chen; Yan, Deng; Peng, Li

2018-01-10

To understand the current status of human resources of parasitic disease control and prevention organizations in Henan Province, so as to provide the reference for promoting the integrative ability of the prevention and control of parasitic diseases in Henan Province. The questionnaires were designed and the method of census was adopted. The information, such as the amounts, majors, education background, technical titles, working years, and turnover in each parasitic disease control and prevention organization was collected by the centers for disease control and prevention (CDCs) at all levels. The data were descriptively analyzed. Totally 179 CDCs were investigated, in which only 19.0% (34/179) had the independent parasitic diseases control institution (department) . There were only 258 full-time staffs working on parasitic disease control and prevention in the whole province, in which only 61.9% (159/258) were health professionals. Those with junior college degree or below in the health professionals accounted for 60.3% (96/159) . Most of them (42.1%) had over 20 years of experience, but 57.9% (92/159) of their technical post titles were at primary level or below. The proportion of the health professionals is low in the parasitic disease control and prevention organizations in Henan Province. The human resource construction for parasitic disease control and prevention at all levels should be strengthened.

One of the criteria for selecting a contractor for high-rise construction

NASA Astrophysics Data System (ADS)

Tuskaeva, Zalina; Tagirov, Timur

2018-03-01

The mechanisms for management of the building complex used and proposed to date do not always provide the required result in the assessment of the construction organization facilities. Therefore, the development of new effective methods for such an assessment is an urgent task especially in questions related to high-rise construction. The article formally sets the task of assessing the technical facilities of a construction organization. Due to the use of expert methods, the weighted values of the coefficients of local indicators for technical facilities are identified

14 CFR 151.51 - Performance of construction work: Sponsor force account.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Performance of construction work: Sponsor force account. 151.51 Section 151.51 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT... Development Projects § 151.51 Performance of construction work: Sponsor force account. (a) Before undertaking...

14 CFR 151.51 - Performance of construction work: Sponsor force account.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Performance of construction work: Sponsor force account. 151.51 Section 151.51 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT... Development Projects § 151.51 Performance of construction work: Sponsor force account. (a) Before undertaking...

14 CFR 151.51 - Performance of construction work: Sponsor force account.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Performance of construction work: Sponsor force account. 151.51 Section 151.51 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT... Development Projects § 151.51 Performance of construction work: Sponsor force account. (a) Before undertaking...

14 CFR 151.51 - Performance of construction work: Sponsor force account.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Performance of construction work: Sponsor force account. 151.51 Section 151.51 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT... Development Projects § 151.51 Performance of construction work: Sponsor force account. (a) Before undertaking...

14 CFR 151.51 - Performance of construction work: Sponsor force account.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Performance of construction work: Sponsor force account. 151.51 Section 151.51 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT... Development Projects § 151.51 Performance of construction work: Sponsor force account. (a) Before undertaking...

Anticipated Work-Family Conflict: A Construct Investigation

ERIC Educational Resources Information Center

Westring, Alyssa Friede; Ryan, Ann Marie

2011-01-01

To date, little is known about how work-family issues impact the career development process. In the current paper, we explore this issue by investigating a relatively unstudied construct: anticipated work-family conflict. We found that this construct can be represented by the same six-dimensional factor structure used to assess concurrent…

41 CFR 60-4.2 - Solicitations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... trade on all construction work in the covered area, are as follows: Time- tables Goals for minority... goals for each year. These goals are applicable to all the Contractor's construction work (whether or... construction work in a geographical area located outside of the covered area, it shall apply the goals...

75 FR 57532 - In the Matter of: Stone & Webster Construction, Inc.; Confirmatory Order (Effective Immediately)

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-21

... to working in the nuclear industry for workers coming in without nuclear experience; New Hire... employees in its Nuclear Services (i.e., construction) and Nuclear Maintenance Divisions working at nuclear... (i.e., construction) and Nuclear Maintenance Divisions working at nuclear facilities addressing: (a...

[Risk factors associated with work-related accidents in the construction industry in the Valley of Mexico].

PubMed

Sarmiento-Salinas, Rodrigo; López-Rojas, Pablo; Marín-Cotoñieto, Irma Araceli; Godínez-Rocha, Arturo; Haro-García, Luis; Salinas-Tovar, Santiago

2004-01-01

Our aim was to describe construction-industry, work-related accident prevalence in, associated factors in, and potential impact on affiliated workers of the Mexican Institute of Social Security (Instituto Mexicano del Seguro Social, IMSS) in the Valley of Mexico. Prevalent cases in a retrospective case-control design. These include 385 construction-industry workers who were found to have construction work-related accidents in 2001. Controls comprised 385 active construction-industry workers without work-related accident background paired by gender, workplace, and worksite. Work-related accident prevalence in construction workers was 5.5%; most important risk factors and etiology fraction (Ef) included the following: age 16-20 years odds ratio, OR = 1.58, 95% confidence interval (95% CI) 1.40-10.7, p = 0.001, Ef 0.36; eventual insurance, OR = 3.7, 95% CI, 2.16-26.45, p = 0.001), Ef, 0.72, and no training for job, OR = 5.3, 95% CI, 4.9-69.2, p = 0.01), Ef: 0.81. Variables not showing significance were included salary, work shift, and workday. Work-related accident prevalence maintains its preponderance in the Valley of Mexico construction industry; identified risk factors are potentially modifiable, among which job training acquires unquestionable relevance.

An investigation of matched index of refraction technique and its application in optical measurements of fluid flow

NASA Astrophysics Data System (ADS)

Amini, Noushin; Hassan, Yassin A.

2012-12-01

Optical distortions caused by non-uniformities of the refractive index within the measurement volume is a major impediment for all laser diagnostic imaging techniques applied in experimental fluid dynamic studies. Matching the refractive indices of the working fluid and the test section walls and interfaces provides an effective solution to this problem. The experimental set-ups designed to be used along with laser imaging techniques are typically constructed of transparent solid materials. In this investigation, different types of aqueous salt solutions and various organic fluids are studied for refractive index matching with acrylic and fused quartz, which are commonly used in construction of the test sections. One aqueous CaCl2·2H2O solution (63 % by weight) and two organic fluids, Dibutyl Phthalate and P-Cymene, are suggested for refractive index matching with fused quartz and acrylic, respectively. Moreover, the temperature dependence of the refractive indices of these fluids is investigated, and the Thermooptic Constant is calculated for each fluid. Finally, the fluid viscosity for different shear rates is measured as a function of temperature and is applied to characterize the physical behavior of the proposed fluids.

Measurement profiles of nano-scale ion beam for optimized radiation energy losses

NASA Astrophysics Data System (ADS)

Woo, T. H.; Cho, H. S.

2011-10-01

The behavior of charged particles is investigated for nano-scale ion beam therapy using a medical accelerator. Computational work is performed for the Bragg-peak simulation, which is focused on human organ material of pancreas and thyroid. The Results show that the trends of the dose have several different kinds of distributions. Before constructing a heavy ion collider, this study can give us the reliability of the therapeutic effect. Realistic treatment using human organs is calculated in a simple and cost effective manner using the computational code, the Stopping and Range of Ions in Matter 2008 (SRIM 2008). Considering the safety of the therapy, it is suggested to give a patient orient planning of the cancer therapy. The energy losses in ionization and phonon are analyzed, which are the behaviors in the molecular level nano-scopic investigation. The different fluctuations are shown at 150 MeV, where the lowest temperature is found in proton and pancreas case. Finally, the protocol for the radiation therapy is constructed by the simulation in which the procedure for a better therapy is selected. An experimental measurement incorporated with the simulations could be programmed by this protocol.

Location priority for non-formal early childhood education school based on promethee method and map visualization

NASA Astrophysics Data System (ADS)

Ayu Nurul Handayani, Hemas; Waspada, Indra

2018-05-01

Non-formal Early Childhood Education (non-formal ECE) is an education that is held for children under 4 years old. The implementation in District of Banyumas, Non-formal ECE is monitored by The District Government of Banyumas and helped by Sanggar Kegiatan Belajar (SKB) Purwokerto as one of the organizer of Non-formal Education. The government itself has a program for distributing ECE to all villages in Indonesia. However, The location to construct the ECE school in several years ahead is not arranged yet. Therefore, for supporting that program, a decision support system is made to give some recommendation villages for constructing The ECE building. The data are projected based on Brown’s Double Exponential Smoothing Method and utilizing Preference Ranking Organization Method for Enrichment Evaluation (Promethee) to generate priority order. As the recommendations system, it generates map visualization which is colored according to the priority level of sub-district and village area. The system was tested with black box testing, Promethee testing, and usability testing. The results showed that the system functionality and Promethee algorithm were working properly, and the user was satisfied.

Perspectives of construction robots

NASA Astrophysics Data System (ADS)

Stepanov, M. A.; Gridchin, A. M.

2018-03-01

This article is an overview of construction robots features, based on formulating the list of requirements for different types of construction robots in relation to different types of construction works.. It describes a variety of construction works and ways to construct new or to adapt existing robot designs for a construction process. Also, it shows the prospects of AI-controlled machines, implementation of automated control systems and networks on construction sites. In the end, different ways to develop and improve, including ecological aspect, the construction process through the wide robotization, creating of data communication networks and, in perspective, establishing of fully AI-controlled construction complex are formulated.

Mixed-linker strategy for the construction of multifunctional metal–organic frameworks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Qin, Jun-Sheng; Yuan, Shuai; Wang, Qi

2017-01-01

Mixed-linker strategy is a promising way to construct multifunctional metal–organic frameworks (MOFs). In this review, we demonstrate the recent developments, discussions and challenges related to the preparation and applications of four types of mixed-linker MOF materials.

Soil mixing design methods and construction techniques for use in high organic soils.

DOT National Transportation Integrated Search

2015-06-01

Organic soils present a difficult challenge for roadway designers and construction due to the high : compressibility of the soil structure and the often associated high water table and moisture content. For : other soft or loose inorganic soils, stab...

The effects of organizational commitment and structural empowerment on patient safety culture.

PubMed

Horwitz, Sujin K; Horwitz, Irwin B

2017-03-20

Purpose The purpose of this paper is to investigate the relationship between patient safety culture and two attitudinal constructs: affective organizational commitment and structural empowerment. In doing so, the main and interaction effects of the two constructs on the perception of patient safety culture were assessed using a cohort of physicians. Design/methodology/approach Affective commitment was measured with the Organizational Commitment Questionnaire, whereas structural empowerment was assessed with the Conditions of Work Effectiveness Questionnaire-II. The abbreviated versions of these surveys were administered to a cohort of 71 post-doctoral medical residents. For the data analysis, hierarchical regression analyses were performed for the main and interaction effects of affective commitment and structural empowerment on the perception of patient safety culture. Findings A total of 63 surveys were analyzed. The results revealed that both affective commitment and structural empowerment were positively related to patient safety culture. A potential interaction effect of the two attitudinal constructs on patient safety culture was tested but no such effect was detected. Research limitations/implications This study suggests that there are potential benefits of promoting affective commitment and structural empowerment for patient safety culture in health care organizations. By identifying the positive associations between the two constructs and patient safety culture, this study provides additional empirical support for Kanter's theoretical tenet that structural and organizational support together helps to shape the perceptions of patient safety culture. Originality/value Despite the wide recognition of employee empowerment and commitment in organizational research, there has still been a paucity of empirical studies specifically assessing their effects on patient safety culture in health care organizations. To the authors' knowledge, this study is the first empirical study to examine the relationship between structural empowerment as proposed by Kanter and the culture of patient safety using physicians.

Revegetation of Acid Rock Drainage (ARD) Producing Slope Surface Using Phosphate Microencapsulation and Artificial Soil

NASA Astrophysics Data System (ADS)

Kim, Jae Gon

2017-04-01

Oxidation of sulfides produces acid rock drainage (ARD) upon their exposure to oxidation environment by construction and mining activities. The ARD causes the acidification and metal contamination of soil, surface water and groundwater, the damage of plant, the deterioration of landscape and the reduction of slope stability. The revegetation of slope surface is one of commonly adopted strategies to reduce erosion and to increase slope stability. However, the revegetation of the ARD producing slope surface is frequently failed due to its high acidity and toxic metal content. We developed a revegetation method consisting of microencapsualtion and artificial soil in the laboratory. The revegetation method was applied on the ARD producing slope on which the revegetation using soil coverage and seeding was failed and monitored the plant growth for one year. The phosphate solution was applied on sulfide containing rock to form stable Fe-phosphate mineral on the surface of sulfide, which worked as a physical barrier to prevent contacting oxidants such as oxygen and Fe3+ ion to the sulfide surface. After the microencapsulation, two artificial soil layers were constructed. The first layer containing organic matter, dolomite powder and soil was constructed at 2 cm thickness to neutralize the rising acidic capillary water from the subsurface and to remove the dissolved oxygen from the percolating rain water. Finally, the second layer containing seeds, organic matter, nutrients and soil was constructed at 3 cm thickness on the top. After application of the method, the pH of the soil below the artificial soil layer increased and the ARD production from the rock fragments reduced. The plant growth showed an ordinary state while the plant died two month after germination for the previous revegetation trial. No soil erosion occurred from the slope during the one year field test.

Solvent-induced controllable synthesis, single-crystal to single-crystal transformation and encapsulation of Alq3 for modulated luminescence in (4,8)-connected metal-organic frameworks.

PubMed

Lan, Ya-Qian; Jiang, Hai-Long; Li, Shun-Li; Xu, Qiang

2012-07-16

In this work, for the first time, we have systematically demonstrated that solvent plays crucial roles in both controllable synthesis of metal-organic frameworks (MOFs) and their structural transformation process. With solvent as the only variable, five new MOFs with different structures have been constructed, in which one MOF undergoes solvent-induced single-crystal to single-crystal (SCSC) transformation that involves not only solvent exchange but also the cleavage and formation of coordination bonds. Particularly, a significant crystallographic change has been realized through an unprecedented three-step SCSC transformation process. Furthermore, we have demonstrated that the obtained MOF could be an excellent host for chromophores such as Alq3 for modulated luminescent properties.

Basic Sciences Fertilizing Clinical Microbiology and Infection Management

PubMed Central

2017-01-01

Abstract Basic sciences constitute the most abundant sources of creativity and innovation, as they are based on the passion of knowing. Basic knowledge, in close and fertile contact with medical and public health needs, produces distinct advancements in applied sciences. Basic sciences play the role of stem cells, providing material and semantics to construct differentiated tissues and organisms and enabling specialized functions and applications. However, eventually processes of “practice deconstruction” might reveal basic questions, as in de-differentiation of tissue cells. Basic sciences, microbiology, infectious diseases, and public health constitute an epistemological gradient that should also be an investigational continuum. The coexistence of all these interests and their cross-fertilization should be favored by interdisciplinary, integrative research organizations working simultaneously in the analytical and synthetic dimensions of scientific knowledge. PMID:28859345

Enhanced nutrient transport improves the depth-dependent properties of tri-layered engineered cartilage constructs with zonal co-culture of chondrocytes and MSCs.

PubMed

Kim, Minwook; Farrell, Megan J; Steinberg, David R; Burdick, Jason A; Mauck, Robert L

2017-08-01

Biomimetic design in cartilage tissue engineering is a challenge given the complexity of the native tissue. While numerous studies have generated constructs with near-native bulk properties, recapitulating the depth-dependent features of native tissue remains a challenge. Furthermore, limitations in nutrient transport and matrix accumulation in engineered constructs hinders maturation within the central core of large constructs. To overcome these limitations, we fabricated tri-layered constructs that recapitulate the depth-dependent cellular organization and functional properties of native tissue using zonally derived chondrocytes co-cultured with MSCs. We also introduced porous hollow fibers (HFs) and HFs/cotton threads to enhance nutrient transport. Our results showed that tri-layered constructs with depth-dependent organization and properties could be fabricated. The addition of HFs or HFs/threads improved matrix accumulation in the central core region. With HF/threads, the local modulus in the deep region of tri-layered constructs nearly matched that of native tissue, though the properties in the central regions remained lower. These constructs reproduced the zonal organization and depth-dependent properties of native tissue, and demonstrate that a layer-by-layer fabrication scheme holds promise for the biomimetic repair of focal cartilage defects. Articular cartilage is a highly organized tissue driven by zonal heterogeneity of cells, extracellular matrix proteins and fibril orientations, resulting in depth-dependent mechanical properties. Therefore, the recapitulation of the functional properties of native cartilage in a tissue engineered construct requires such a biomimetic design of the morphological organization, and this has remained a challenge in cartilage tissue engineering. This study demonstrates that a layer-by-layer fabrication scheme, including co-cultures of zone-specific articular CHs and MSCs, can reproduce the depth-dependent characteristics and mechanical properties of native cartilage while minimizing the need for large numbers of chondrocytes. In addition, introduction of a porous hollow fiber (combined with a cotton thread) enhanced nutrient transport and depth-dependent properties of the tri-layered construct. Such a tri-layered construct may provide critical advantages for focal cartilage repair. These constructs hold promise for restoring native tissue structure and function, and may be beneficial in terms of zone-to-zone integration with adjacent host tissue and providing more appropriate strain transfer after implantation. Copyright © 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Global trade, public health, and health services: stakeholders' constructions of the key issues.

PubMed

Waitzkin, Howard; Jasso-Aguilar, Rebeca; Landwehr, Angela; Mountain, Carolyn

2005-09-01

Focusing mainly on the United States and Latin America, we aimed to identify the constructions of social reality held by the major stakeholders participating in policy debates about global trade, public health, and health services. In a multi-method, qualitative design, we used three sources of data: research and archival literature, 1980-2004; interviews with key informants who represented major organizations participating in these debates, 2002-2004; and organizational reports, 1980-2004. We targeted several types of organizations: government agencies, international financial institutions (IFIs) and trade organizations, international health organizations, multinational corporations, and advocacy groups. Many governments in Latin America define health as a right and health services as a public good. Thus, the government bears responsibility for that right. In contrast, the US government's philosophy of free trade and promoting a market economy assumes that by expanding the private sector, improved economic conditions will improve overall health with a minimum government provision of health care. US government agencies also view promotion of global health as a means to serve US interests. IFIs have emphasized reforms that include reduction and privatization of public sector services. International health organizations have tended to adopt the policy perspectives of IFIs and trade organizations. Advocacy groups have emphasized the deleterious effects of international trade agreements on public health and health services. Organizational stakeholders hold widely divergent constructions of reality regarding trade, public health, and health services. Social constructions concerning trade and health reflect broad ideologies concerning the impacts of market processes. Such constructions manifest features of "creed," regarding the role of the market in advancing human purposes and meeting human needs. Differences in constructions of trade and health constrain policies to address the profound changes generated by global trade.

Construction of anthropomorphic hybrid, dual-lattice voxel models for optimizing image quality and dose in radiography

NASA Astrophysics Data System (ADS)

Petoussi-Henss, Nina; Becker, Janine; Greiter, Matthias; Schlattl, Helmut; Zankl, Maria; Hoeschen, Christoph

2014-03-01

In radiography there is generally a conflict between the best image quality and the lowest possible patient dose. A proven method of dosimetry is the simulation of radiation transport in virtual human models (i.e. phantoms). However, while the resolution of these voxel models is adequate for most dosimetric purposes, they cannot provide the required organ fine structures necessary for the assessment of the imaging quality. The aim of this work is to develop hybrid/dual-lattice voxel models (called also phantoms) as well as simulation methods by which patient dose and image quality for typical radiographic procedures can be determined. The results will provide a basis to investigate by means of simulations the relationships between patient dose and image quality for various imaging parameters and develop methods for their optimization. A hybrid model, based on NURBS (Non Linear Uniform Rational B-Spline) and PM (Polygon Mesh) surfaces, was constructed from an existing voxel model of a female patient. The organs of the hybrid model can be then scaled and deformed in a non-uniform way i.e. organ by organ; they can be, thus, adapted to patient characteristics without losing their anatomical realism. Furthermore, the left lobe of the lung was substituted by a high resolution lung voxel model, resulting in a dual-lattice geometry model. "Dual lattice" means in this context the combination of voxel models with different resolution. Monte Carlo simulations of radiographic imaging were performed with the code EGS4nrc, modified such as to perform dual lattice transport. Results are presented for a thorax examination.

Team knowledge research: emerging trends and critical needs.

PubMed

Wildman, Jessica L; Thayer, Amanda L; Pavlas, Davin; Salas, Eduardo; Stewart, John E; Howse, William R

2012-02-01

This article provides a systematic review of the team knowledge literature and guidance for further research. Recent research has called attention to the need for the improved study and understanding of team knowledge. Team knowledge refers to the higher level knowledge structures that emerge from the interactions of individual team members. We conducted a systematic review of the team knowledge literature, focusing on empirical work that involves the measurement of team knowledge constructs. For each study, we extracted author degree area, study design type, study setting, participant type, task type, construct type, elicitation method, aggregation method, measurement timeline, and criterion domain. Our analyses demonstrate that many of the methodological characteristics of team knowledge research can be linked back to the academic training of the primary author and that there are considerable gaps in our knowledge with regard to the relationships between team knowledge constructs, the mediating mechanisms between team knowledge and performance, and relationships with criteria outside of team performance, among others. We also identify categories of team knowledge not yet examined based on an organizing framework derived from a synthesis of the literature. There are clear opportunities for expansion in the study of team knowledge; the science of team knowledge would benefit from a more holistic theoretical approach. Human factors researchers are increasingly involved in the study of teams. This review and the resulting organizing framework provide researchers with a summary of team knowledge research over the past 10 years and directions for improving further research.

Dye@bio-MOF-1 Composite as a Dual-Emitting Platform for Enhanced Detection of a Wide Range of Explosive Molecules.

PubMed

Wang, Chen; Tian, Li; Zhu, Wei; Wang, Shiqiang; Wang, Peng; Liang, Yun; Zhang, Wanlin; Zhao, Hongwei; Li, Guangtao

2017-06-14

By incorporating a cationic dye within a metal-organic framework (MOF) through an ion-exchange process, a responsive dye@bio-MOF-1 composite has been synthesized, serving as a dual-emitting platform for enhanced detection of different kinds of nitro-explosives, especially nitroalkanes, nitramines, and nitrate esters. The dye@bio-MOF-1 composite was constructed with free amines on their well-defined cavities, which is essential for the capture of explosives into their confined nanospace. It was observed that the encapsulation of explosives into the constructed dye@bio-MOF-1 composite could dramatically alter the luminescent properties of the dyes as well as the MOF skeletons owing to the size exclusivity and confinement-induced effect. For nitroaromatics, the dye@bio-MOF-1 composite exhibits turn-off responses via fluorescence quenching. Unexpectedly, the composite shows unique turn-on responses for aliphatic nitro-organics via confinement-induced enhancement, demonstrating enhanced ability to detecting different kinds of explosives selectively in aqueous solution. Furthermore, the dye@bio-MOF-1 film was facilely fabricated, making the chemical sensing more convenient and easier to realize the discrimination of the targeted explosives. The dual tunable responses indicate that dye@bio-MOF-1 composites are favorable materials for molecular sensing. On the basis of the host-guest properties of the constructed dye@bio-MOF-1 composite, our work can be further extended to sensing specific analytes with remarkable turn-on sensing properties, in particular those difficult to recognize with conventional methods.

7 CFR 1717.604 - Long-range engineering plans and construction work plans.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 11 2010-01-01 2010-01-01 false Long-range engineering plans and construction work... AND GUARANTEED ELECTRIC LOANS Operational Controls § 1717.604 Long-range engineering plans and construction work plans. (a) All borrowers are required to maintain up-to-date long-range engineering plans and...

7 CFR 1717.604 - Long-range engineering plans and construction work plans.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 11 2013-01-01 2013-01-01 false Long-range engineering plans and construction work... AND GUARANTEED ELECTRIC LOANS Operational Controls § 1717.604 Long-range engineering plans and construction work plans. (a) All borrowers are required to maintain up-to-date long-range engineering plans and...

7 CFR 1717.604 - Long-range engineering plans and construction work plans.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 11 2014-01-01 2014-01-01 false Long-range engineering plans and construction work... AND GUARANTEED ELECTRIC LOANS Operational Controls § 1717.604 Long-range engineering plans and construction work plans. (a) All borrowers are required to maintain up-to-date long-range engineering plans and...

7 CFR 1717.604 - Long-range engineering plans and construction work plans.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 11 2012-01-01 2012-01-01 false Long-range engineering plans and construction work... AND GUARANTEED ELECTRIC LOANS Operational Controls § 1717.604 Long-range engineering plans and construction work plans. (a) All borrowers are required to maintain up-to-date long-range engineering plans and...

7 CFR 1717.604 - Long-range engineering plans and construction work plans.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 11 2011-01-01 2011-01-01 false Long-range engineering plans and construction work... AND GUARANTEED ELECTRIC LOANS Operational Controls § 1717.604 Long-range engineering plans and construction work plans. (a) All borrowers are required to maintain up-to-date long-range engineering plans and...

48 CFR 1827.304-3 - Contracts for construction work or architect-engineer services. (NASA supplements paragraph (a))

Code of Federal Regulations, 2010 CFR

2010-10-01

... work or architect-engineer services. (NASA supplements paragraph (a)) 1827.304-3 Section 1827.304-3... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Patent Rights Under Government Contracts 1827.304-3 Contracts for construction work or architect-engineer services. (NASA supplements paragraph (a)) (a) For construction or...

A polyhedron-based metal-organic framework with a reo-e net.

PubMed

Ren, Guojian; Liu, Shuxia; Wei, Feng; Ma, Fengji; Tang, Qun; Li, Shujun

2012-10-14

A polyhedron-based metal-organic framework has been designed and constructed with a reo-e net, which is constructed from trinuclear nickel clusters and mixed ligands (copolymerization pattern). It comprises three kinds of polyhedra, which are the hexahedron, cuboctahedron and rhombicuboctahedron.

Active Work Zone Safety Using Emerging Technologies 2017.

DOT National Transportation Integrated Search

2017-07-01

Highway construction work zones are hazardous environments characterized by a dynamic and limited work space. A host of interactions between workers, passing commuter vehicles, and moving construction equipment occurs in highway work zones fostering ...

34 CFR 75.605 - Beginning the construction.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 34 Education 1 2014-07-01 2014-07-01 false Beginning the construction. 75.605 Section 75.605... by a Grantee? Construction § 75.605 Beginning the construction. (a) A grantee shall begin work on... working drawings and specifications. (Authority: 20 U.S.C. 1221e-3 and 3474) ...

Mapping between the OBO and OWL ontology languages.

PubMed

Tirmizi, Syed Hamid; Aitken, Stuart; Moreira, Dilvan A; Mungall, Chris; Sequeda, Juan; Shah, Nigam H; Miranker, Daniel P

2011-03-07

Ontologies are commonly used in biomedicine to organize concepts to describe domains such as anatomies, environments, experiment, taxonomies etc. NCBO BioPortal currently hosts about 180 different biomedical ontologies. These ontologies have been mainly expressed in either the Open Biomedical Ontology (OBO) format or the Web Ontology Language (OWL). OBO emerged from the Gene Ontology, and supports most of the biomedical ontology content. In comparison, OWL is a Semantic Web language, and is supported by the World Wide Web consortium together with integral query languages, rule languages and distributed infrastructure for information interchange. These features are highly desirable for the OBO content as well. A convenient method for leveraging these features for OBO ontologies is by transforming OBO ontologies to OWL. We have developed a methodology for translating OBO ontologies to OWL using the organization of the Semantic Web itself to guide the work. The approach reveals that the constructs of OBO can be grouped together to form a similar layer cake. Thus we were able to decompose the problem into two parts. Most OBO constructs have easy and obvious equivalence to a construct in OWL. A small subset of OBO constructs requires deeper consideration. We have defined transformations for all constructs in an effort to foster a standard common mapping between OBO and OWL. Our mapping produces OWL-DL, a Description Logics based subset of OWL with desirable computational properties for efficiency and correctness. Our Java implementation of the mapping is part of the official Gene Ontology project source. Our transformation system provides a lossless roundtrip mapping for OBO ontologies, i.e. an OBO ontology may be translated to OWL and back without loss of knowledge. In addition, it provides a roadmap for bridging the gap between the two ontology languages in order to enable the use of ontology content in a language independent manner.

Mapping between the OBO and OWL ontology languages

PubMed Central

2011-01-01

Background Ontologies are commonly used in biomedicine to organize concepts to describe domains such as anatomies, environments, experiment, taxonomies etc. NCBO BioPortal currently hosts about 180 different biomedical ontologies. These ontologies have been mainly expressed in either the Open Biomedical Ontology (OBO) format or the Web Ontology Language (OWL). OBO emerged from the Gene Ontology, and supports most of the biomedical ontology content. In comparison, OWL is a Semantic Web language, and is supported by the World Wide Web consortium together with integral query languages, rule languages and distributed infrastructure for information interchange. These features are highly desirable for the OBO content as well. A convenient method for leveraging these features for OBO ontologies is by transforming OBO ontologies to OWL. Results We have developed a methodology for translating OBO ontologies to OWL using the organization of the Semantic Web itself to guide the work. The approach reveals that the constructs of OBO can be grouped together to form a similar layer cake. Thus we were able to decompose the problem into two parts. Most OBO constructs have easy and obvious equivalence to a construct in OWL. A small subset of OBO constructs requires deeper consideration. We have defined transformations for all constructs in an effort to foster a standard common mapping between OBO and OWL. Our mapping produces OWL-DL, a Description Logics based subset of OWL with desirable computational properties for efficiency and correctness. Our Java implementation of the mapping is part of the official Gene Ontology project source. Conclusions Our transformation system provides a lossless roundtrip mapping for OBO ontologies, i.e. an OBO ontology may be translated to OWL and back without loss of knowledge. In addition, it provides a roadmap for bridging the gap between the two ontology languages in order to enable the use of ontology content in a language independent manner. PMID:21388572

The co-construction of medical humanitarianism: analysis of personal, organizationally condoned narratives from an agency website.

PubMed

Ager, Alastair; Iacovou, Melina

2014-11-01

Recent years have seen significant growth in both the size and profile of the humanitarian sector. However, little research has focused upon the constructions of humanitarian practice negotiated by agencies and their workers that serve to sustain engagement in the face personal challenges and critique of the humanitarian enterprise. This study used the public narrative of 129 website postings by humanitarian workers deployed with the health-focused international humanitarian organization Médecins Sans Frontières (MSF) to identify recurrent themes in personal, organizationally-condoned, public discourse regarding humanitarian practice. Data represented all eligible postings from a feature on the agency's UK website from May 2002 to April 2012. The text of postings was analysed with respect to emergent themes on an iterative basis. Comprehensive coding of material was achieved through a thematic structure that reflected the core domains of project details, the working environment, characteristics of beneficiaries and recurrent motivational sub-texts. Features of the co-construction of narratives include language serving to neutralize complex political contexts; the specification of barriers as substantive but surmountable; the dominance of the construct of national-international in understanding the operation of teams; intense personal identification with organization values; and the use of resilience as a framing of beneficiary adaptation and perseverance in conditions that--from an external perspective--warrant despair and withdrawal. Recurrent motivational sub-texts include 'making a difference' and contrasts with 'past professional constraints' and 'ordinary life back home.' The prominence of these sub-texts not only highlights key personal agendas but also suggests--notwithstanding policy initiatives regarding stronger contextual rooting and professionalism--continuing organizational emphasis on externality and volunteerism. Overall, postings illustrate a complex co-construction of medical humanitarianism that reflects a negotiated script of personal and organizational understandings adapted to evolving demands of humanitarian engagement. Copyright © 2014 Elsevier Ltd. All rights reserved.

TANK OPERATIONS CONTRACT CONSTRUCTION MANAGEMENT METHODOLOGY UTILIZING THE AGENCY METHOD OF CONSTRUCTION MANAGEMENT TO SAFELY AND EFFECTIVELY COMPLETE NUCLEAR CONSTRUCTION WORK

DOE Office of Scientific and Technical Information (OSTI.GOV)

LESO KF; HAMILTON HM; FARNER M

Washington River Protection Solutions, LLC (WRPS) has faced significant project management challenges in managing Davis-Bacon construction work that meets contractually required small business goals. The unique challenge is to provide contracting opportunities to multiple small business construction subcontractors while performing high hazard work in a safe and productive manner. Previous to the Washington River Protection Solutions, LLC contract, Construction work at the Hanford Tank Farms was contracted to large companies, while current Department of Energy (DOE) Contracts typically emphasize small business awards. As an integral part of Nuclear Project Management at Hanford Tank Farms, construction involves removal of old equipmentmore » and structures and installation of new infrastructure to support waste retrieval and waste feed delivery to the Waste Treatment Plant. Utilizing the optimum construction approach ensures that the contractors responsible for this work are successful in meeting safety, quality, cost and schedule objectives while working in a very hazardous environment. This paper describes the successful transition from a traditional project delivery method that utilized a large business general contractor and subcontractors to a new project construction management model that is more oriented to small businesses. Construction has selected the Agency Construction Management Method. This method was implemented in the first quarter of Fiscal Year (FY) 2009, where Construction Management is performed by substantially home office resources from the URS Northwest Office in Richland, Washington. The Agency Method has allowed WRPS to provide proven Construction Managers and Field Leads to mentor and direct small business contractors, thus providing expertise and assurance of a successful project. Construction execution contracts are subcontracted directly by WRPS to small or disadvantaged contractors that are mentored and supported by DRS personnel. Each small contractor is mentored and supported utilizing the principles of the Construction Industry Institute (CII) Partnering process. Some of the key mentoring and partnering areas that are explored in this paper are, internal and external safety professional support, subcontractor safety teams and the interface with project and site safety teams, quality assurance program support to facilitate compliance with NQA-1, construction, team roles and responsibilities, work definition for successful fixed price contracts, scheduling and interface with project schedules and cost projection/accruals. The practical application of the CII Partnering principles, with the Construction Management expertise of URS, has led to a highly successful construction model that also meets small business contracting goals.« less

Emerging issues in occupational safety and health.

PubMed

Schulte, Paul A

2006-01-01

In developed countries, changes in the nature of work and the workforce may necessitate recalibrating the vision of occupational safety and health (OSH) researchers, practitioners, and policymakers to increase the focus on the most important issues. New methods of organizing the workplace, extensive labor contracting, expansion of service and knowledge sectors, increase in small business, aging and immigrant workers, and the continued existence of traditional hazards in high-risk sectors such as construction, mining, agriculture, health care, and transportation support the need to address: 1) broader consideration of the role and impact of work, 2) relationship between work and psychological dysfunction, 3) increased surveillance basis for research and intervention, 4) overcoming barriers to the conduct and use of epidemiologic research, 5) information and knowledge transfer and application, 6) economic issues in prevention, and 7) the global interconnectedness of OSH. These issues are offered to spur thinking as new national research agendas for OSH are considered for developed countries.

Scheduling IT Staff at a Bank: A Mathematical Programming Approach

PubMed Central

Labidi, M.; Mrad, M.; Gharbi, A.; Louly, M. A.

2014-01-01

We address a real-world optimization problem: the scheduling of a Bank Information Technologies (IT) staff. This problem can be defined as the process of constructing optimized work schedules for staff. In a general sense, it requires the allocation of suitably qualified staff to specific shifts to meet the demands for services of an organization while observing workplace regulations and attempting to satisfy individual work preferences. A monthly shift schedule is prepared to determine the shift duties of each staff considering shift coverage requirements, seniority-based workload rules, and staff work preferences. Due to the large number of conflicting constraints, a multiobjective programming model has been proposed to automate the schedule generation process. The suggested mathematical model has been implemented using Lingo software. The results indicate that high quality solutions can be obtained within a few seconds compared to the manually prepared schedules. PMID:24772032

Scheduling IT staff at a bank: a mathematical programming approach.

PubMed

Labidi, M; Mrad, M; Gharbi, A; Louly, M A

2014-01-01

We address a real-world optimization problem: the scheduling of a Bank Information Technologies (IT) staff. This problem can be defined as the process of constructing optimized work schedules for staff. In a general sense, it requires the allocation of suitably qualified staff to specific shifts to meet the demands for services of an organization while observing workplace regulations and attempting to satisfy individual work preferences. A monthly shift schedule is prepared to determine the shift duties of each staff considering shift coverage requirements, seniority-based workload rules, and staff work preferences. Due to the large number of conflicting constraints, a multiobjective programming model has been proposed to automate the schedule generation process. The suggested mathematical model has been implemented using Lingo software. The results indicate that high quality solutions can be obtained within a few seconds compared to the manually prepared schedules.

Ubiquitous Mobile Knowledge Construction in Collaborative Learning Environments

PubMed Central

Baloian, Nelson; Zurita, Gustavo

2012-01-01

Knowledge management is a critical activity for any organization. It has been said to be a differentiating factor and an important source of competitiveness if this knowledge is constructed and shared among its members, thus creating a learning organization. Knowledge construction is critical for any collaborative organizational learning environment. Nowadays workers must perform knowledge creation tasks while in motion, not just in static physical locations; therefore it is also required that knowledge construction activities be performed in ubiquitous scenarios, and supported by mobile and pervasive computational systems. These knowledge creation systems should help people in or outside organizations convert their tacit knowledge into explicit knowledge, thus supporting the knowledge construction process. Therefore in our understanding, we consider highly relevant that undergraduate university students learn about the knowledge construction process supported by mobile and ubiquitous computing. This has been a little explored issue in this field. This paper presents the design, implementation, and an evaluation of a system called MCKC for Mobile Collaborative Knowledge Construction, supporting collaborative face-to-face tacit knowledge construction and sharing in ubiquitous scenarios. The MCKC system can be used by undergraduate students to learn how to construct knowledge, allowing them anytime and anywhere to create, make explicit and share their knowledge with their co-learners, using visual metaphors, gestures and sketches to implement the human-computer interface of mobile devices (PDAs). PMID:22969333

Ubiquitous mobile knowledge construction in collaborative learning environments.

PubMed

Baloian, Nelson; Zurita, Gustavo

2012-01-01

Knowledge management is a critical activity for any organization. It has been said to be a differentiating factor and an important source of competitiveness if this knowledge is constructed and shared among its members, thus creating a learning organization. Knowledge construction is critical for any collaborative organizational learning environment. Nowadays workers must perform knowledge creation tasks while in motion, not just in static physical locations; therefore it is also required that knowledge construction activities be performed in ubiquitous scenarios, and supported by mobile and pervasive computational systems. These knowledge creation systems should help people in or outside organizations convert their tacit knowledge into explicit knowledge, thus supporting the knowledge construction process. Therefore in our understanding, we consider highly relevant that undergraduate university students learn about the knowledge construction process supported by mobile and ubiquitous computing. This has been a little explored issue in this field. This paper presents the design, implementation, and an evaluation of a system called MCKC for Mobile Collaborative Knowledge Construction, supporting collaborative face-to-face tacit knowledge construction and sharing in ubiquitous scenarios. The MCKC system can be used by undergraduate students to learn how to construct knowledge, allowing them anytime and anywhere to create, make explicit and share their knowledge with their co-learners, using visual metaphors, gestures and sketches to implement the human-computer interface of mobile devices (PDAs).

Why developmental niche construction is not selective niche construction: and why it matters

PubMed Central

2017-01-01

In the last decade, niche construction has been heralded as the neglected process in evolution. But niche construction is just one way in which the organism's interaction with and construction of the environment can have potential evolutionary significance. The constructed environment does not just select for, it also produces new variation. Nearly 3 decades ago, and in parallel with Odling-Smee's article ‘Niche-constructing phenotypes', West and King introduced the ‘ontogenetic niche’ to give the phenomena of exogenetic inheritance a formal name. Since then, a range of fields in the life sciences and medicine has amassed evidence that parents influence their offspring by means other than DNA (parental effects), and proposed mechanisms for how heritable variation can be environmentally induced and developmentally regulated. The concept of ‘developmental niche construction’ (DNC) elucidates how a diverse range of mechanisms contributes to the transgenerational transfer of developmental resources. My most central of claims is that whereas the selective niche of niche construction theory is primarily used to explain the active role of the organism in its selective environment, DNC is meant to indicate the active role of the organism in its developmental environment. The paper highlights the differences between the construction of the selective and the developmental niche, and explores the overall significance of DNC for evolutionary theory. PMID:28839923

Earthworks logistics in the high density urban development conditions - case study

NASA Astrophysics Data System (ADS)

Sobotka, A.; Blajer, M.

2017-10-01

Realisation of the construction projects on highly urbanised areas carries many difficulties and logistic problems. Earthworks conducted in such conditions constitute a good example of how important it is to properly plan the works and use the technical means of the logistics infrastructure. The construction processes on the observed construction site, in combination with their external logistics service are a complex system, difficult for mathematical modelling and achievement of appropriate data for planning the works. The paper shows describe and analysis of earthworks during construction of the Centre of Power Engineering of AGH in Krakow for two stages of a construction project. At the planning stage in the preparatory phase (before realization) and in the implementation phase of construction works (foundation). In the first case, an example of the use of queuing theory for prediction of excavation time under random work conditions of the excavator and the associated trucks is provided. In the second case there is a change of foundation works technology resulting as a consequence of changes in logistics earthworks. Observation of the construction has confirmed that the use of appropriate methods of construction works management, and in this case agile management, the time and cost of the project have not been exceeded. The success of a project depends on the ability of the contractor to react quickly when changes occur in the design, technology, environment, etc.

Linear programming model to construct phylogenetic network for 16S rRNA sequences of photosynthetic organisms and influenza viruses.

PubMed

Mathur, Rinku; Adlakha, Neeru

2014-06-01

Phylogenetic trees give the information about the vertical relationships of ancestors and descendants but phylogenetic networks are used to visualize the horizontal relationships among the different organisms. In order to predict reticulate events there is a need to construct phylogenetic networks. Here, a Linear Programming (LP) model has been developed for the construction of phylogenetic network. The model is validated by using data sets of chloroplast of 16S rRNA sequences of photosynthetic organisms and Influenza A/H5N1 viruses. Results obtained are in agreement with those obtained by earlier researchers.

Formal and Legal Aspects of Buying and Commissioning Flats

NASA Astrophysics Data System (ADS)

Dubas, Sebastian; Nowotarski, Piotr; Milwicz, Roman

2017-10-01

Formal and legal aspects of buying flats and their reception is very current topic and touches wide group of buyers. Annually in Poland great amount of flats is being sold and put to use. However, the case of housing purchase requires knowledge of both the construction and the legal aspects each buyer has to encounter. The paper faces the subject of formal and legal aspects, and analyses accompanying procedure of purchase and reception of housing in Poland. The article presents principles associated with the acquisition of a dwelling, process of works reception, removal of detected faults, fault-free reception, transfer of ownership, warranties, guarantees and possibilities of their enforcement. Contracting parties of the developer agreement were revealed. In addition, the entities present in the course of works such as general contractor were mentioned, due to the fact of his direct influence on the results of a contract terms between developer and buyer. Logical connection between three parties (buyer-developer-general contractor) were shown and direct and indirect dependencies were revealed. Existing laws and regulations that govern the relationship between the developer and the buyer of a dwelling were determined showing basic rights and responsibilities of each. The article also presents problems resulting from delaying the completion of works by developer’s fault and indicates possible legal paths to follow in order claim their rights. Due to the fact, that many of discussed formal and legal aspects in this subject have their origin connected to construction works and design issues, author suggests increased quality control and efficient work organization in order to solve problems before appearance.

Construction of RGO/CdIn2S4/g-C3N4 ternary hybrid with enhanced photocatalytic activity for the degradation of tetracycline hydrochloride

NASA Astrophysics Data System (ADS)

Xiao, Peng; Jiang, Deli; Ju, Lixin; Jing, Junjie; Chen, Min

2018-03-01

Although RGO shows great advantage in promoting charge separation and transfer of semiconductor, construction of an efficient RGO-incorporated photocatalyst is still challenging. Herein, RGO was employed to construct novel RGO/CdIn2S4/g-C3N4 (donated as RGO/CIS/CN) ternary photocatalyst by a facile hydrothermal method for the degradation of tetracycline hydrochloride (TC). The RGO/CIS/CN ternary photocatalyst showed significantly enhanced photocatalytic activity towards the degradation of TC as compared to the binary CIS/CN, CIS/CN, and CN/RGO. The photoluminescence and photocurrent response results indicate that this enhanced photocatalytic activity can be mainly ascribed to the improved charge separation and transfer efficiency. Based on the radical trapping and electron spin resonance results, the superoxide radicals and holes are proposed to play an important role in the degradation of TC over RGO/CIS/CN ternary photocatalyst. This work paves new opportunities for the synthesis of RGO-incorporated ternary photocatalyst as an efficient photocatalyst for the degradation of organic contaminant.

Integrated Cr(VI) removal using constructed wetlands and composting.

PubMed

Sultana, Mar-Yam; Chowdhury, Abu Khayer Md Muktadirul Bari; Michailides, Michail K; Akratos, Christos S; Tekerlekopoulou, Athanasia G; Vayenas, Dimitrios V

2015-01-08

The present work was conducted to study integrated chromium removal from aqueous solutions in horizontal subsurface (HSF) constructed wetlands. Two pilot-scale HSF constructed wetlands (CWs) units were built and operated. One unit was planted with common reeds (Phragmites australis) and one was kept unplanted. Influent concentrations of Cr(VI) ranged from 0.5 to 10mg/L. The effect of temperature and hydraulic residence time (8-0.5 days) on Cr(VI) removal were studied. Temperature was proved to affect Cr(VI) removal in both units. In the planted unit maximum Cr(VI) removal efficiencies of 100% were recorded at HRT's of 1 day with Cr(VI) concentrations of 5, 2.5 and 1mg/L, while a significantly lower removal rate was recorded in the unplanted unit. Harvested reed biomass from the CWs was co-composted with olive mill wastes. The final product had excellent physicochemical characteristics (C/N: 14.1-14.7, germination index (GI): 145-157%, Cr: 8-10mg/kg dry mass), fulfills EU requirements and can be used as a fertilizer in organic farming. Copyright © 2014 Elsevier B.V. All rights reserved.

Project safety as a sustainable competitive advantage.

PubMed

Rechenthin, David

2004-01-01

To be consistently profitable, a construction company must complete projects in scope, on schedule, and on budget. At the same time, the nature of the often high-risk work performed by construction companies can result in high accident rates. Clients and other stakeholders are placing increasing pressure on companies to decrease those accident rates. Clients routinely demand copies of safety plans and evidence of past results at the "pre-qualification" or "request for proposal" stages of the procurement process. Are high accident rates and the associated costs just a part of business? Companies that deliver on scope, schedule, and budget have a competitive advantage. Is it possible for projects with low accident rates to use it as a competitive advantage? Is the value added by safety just a temporary or parity issue, or does a successful safety program offer significant advantage to the company and the client? This article concludes that in the case of a high-risk industry, such as the construction industry, an organization with a successful safety program can promote safety performance as a sustainable competitive advantage. It is a choice the company can make.

Structural and Functional Mechanisms of Adaptations of WrbA in Extremophilic Organisms

DTIC Science & Technology

2010-05-11

organisms adapt to high temperature. A model of the thermophilic enzyme was constructed based on the crystal Structure of the mesophilie counterpart to...binding for the thermophilic enzyme was independent of ligand concentration. Comparison of enzyme activities between the two proteins with a variety of...extremophilic organisms adapt to high temperature. A model of the thermophilic enzyme was constructed based on the crystal structure of the mesophilic

To the problem of ensuring stability of activities of construction companies engaged in high-rise building construction

NASA Astrophysics Data System (ADS)

Ivanov, Nikolay; Safe Aldeen, Ahmed

2018-03-01

Recently, more and more attention in scientific literature has been drawn to improving the sustainability of organization. The growth in the volume of high-rise construction in Russia makes the task of assessing and ensuring the sustainability of organizations and enterprises leading this type of construction very relevant. The article considers the approach to assessing the sustainability of the organization's activities in the context of functioning of quality management system (QMS). It puts forward the hypothesis that assessment of sustainability of an organization that has a real and efficient functioning quality management system can be based on the results of assessing the effectiveness of the QMS. The article describes in sufficient detail the sequence of actions to form a list of criteria for assessing the effectiveness of the QMS and sustainability of the organization, and to evaluate both characteristics on the basis of these criteria. For a clear interpretation of the results obtained, the authors use so-called petal diagrams. It suggests an original approach to their creation and analysis. Based on the results of the study, the authors conclude that in order to assess the sustainability of enterprises and organizations analysis of the dynamics of changes in the basic sustainability factors is mandatory.

Determination of VOCs in the Indoor Air of a New and a Renovated Apartment

NASA Astrophysics Data System (ADS)

Meciarova, Ludmila; Vilcekova, Silvia

2016-06-01

This study deals with the occurrence of volatile organic compounds (VOCs) in the indoor environment of a new and a renovated apartment. Qualitative determination of VOCs was carried out with a gas chromatograph with surface acoustic wave detector (GC/SAW). Concentrations of total volatile organic compounds (TVOC) were determined by a photoionization detector with UV lamp. Simultaneously, temperature and relative humidity were monitored with a data logger. The aim of this study was to determine of TVOC concentrations, to use of GC/SAW for determination of individual VOCs in indoor air as well as to predict possible sources of VOCs in these apartments. Measurements were performed after each construction work for better resolution of the contributions of individual materials to the levels of VOC. Mean concentrations of TVOC were 624 μg/m3 in the renovated apartment and 1,686 μg/m3 in the new apartment after completion of all works. The results from the renovated apartment showed that the use of new materials can lead to lower levels of organic compounds in indoor air compared to old materials that were less environmentally friendly. Many types of VOCs were found in both apartments. After reviewing the possible sources, it seems that the main sources of these substances were applied coatings and flooring materials.

Government and voluntary sector differences in organizational capacity to do and use evaluation.

PubMed

Cousins, J Bradley; Goh, Swee C; Elliott, Catherine; Aubry, Tim; Gilbert, Nathalie

2014-06-01

Research on evaluation capacity is limited although a recent survey article on integrating evaluation into the organizational culture (Cousins, Goh, Clark, & Lee, 2004) revealed that interest in the topic is increasing. While knowledge about building the capacity to do evaluation has developed considerably, less is understood about building the organizational capacity to use evaluation. This article reports on the results of a pan-Canadian survey of evaluators working in organizations (internal evaluators or organization members with evaluation responsibility) conducted in 2007. Reliability across all constructs was high. Responses from government evaluators (N=160) were compared to responses from evaluators who work in the voluntary sector (N=89). The former were found to self-identify more highly as 'evaluators' (specialists) whereas the latter tended to identify as 'managers' (non-specialists). As a result, government evaluators had significantly higher self-reported levels of evaluation knowledge (both theory and practice); and they spent more time performing evaluation functions. However, irrespective of role, voluntary sector respondents rated their organizations more favorably than did their government sector counterparts with respect to the antecedents or conditions supporting evaluation capacity, and the capacity to use evaluation. Results are discussed in terms of their implications for evaluation practice and ongoing research. Copyright © 2013 Elsevier Ltd. All rights reserved.

Association between perceived present working conditions and demands versus attitude to early retirement among construction workers.

PubMed

Jebens, Einar; Medbø, Jon I; Knutsen, Oddvar; Mamen, Asgeir; Veiersted, Kaj Bo

2014-01-01

Early retirement is an increasing problem in the construction industry. There is limited information about causes leading employees to leave working life early. We have compared construction workers present situation with their perception of future demands at work to avoid early retirement. All 87 employees in a medium-sized Norwegian construction company participated in the study. All were men and answered questionnaires on health and pain, work ability, mechanical exposure, psychosocial conditions, and demands regarding future working conditions. Most workers showed good work ability, irrespective of age. Many reported high levels of mechanical exposure at work. The level of musculoskeletal pain was higher in the middle-aged (30-50 year old) age groups and seniors aged over 50 years than among the youngest workers less than 30 years of age. All workers reported that good health was important for continued working. Most workers stated that future work must not be too physically demanding. Many workers reported relatively low job satisfaction; consequently an interesting job was rated as important for continuing work. Good social conditions were a high priority. According to the examined construction workers, good health and reduced levels of mechanical exposure at work are essential to avoid early retirement.

Measurement of a model of implementation for health care: toward a testable theory

PubMed Central

2012-01-01

Background Greenhalgh et al. used a considerable evidence-base to develop a comprehensive model of implementation of innovations in healthcare organizations [1]. However, these authors did not fully operationalize their model, making it difficult to test formally. The present paper represents a first step in operationalizing Greenhalgh et al.’s model by providing background, rationale, working definitions, and measurement of key constructs. Methods A systematic review of the literature was conducted for key words representing 53 separate sub-constructs from six of the model’s broad constructs. Using an iterative process, we reviewed existing measures and utilized or adapted items. Where no one measure was deemed appropriate, we developed other items to measure the constructs through consensus. Results The review and iterative process of team consensus identified three types of data that can been used to operationalize the constructs in the model: survey items, interview questions, and administrative data. Specific examples of each of these are reported. Conclusion Despite limitations, the mixed-methods approach to measurement using the survey, interview measure, and administrative data can facilitate research on implementation by providing investigators with a measurement tool that captures most of the constructs identified by the Greenhalgh model. These measures are currently being used to collect data concerning the implementation of two evidence-based psychotherapies disseminated nationally within Department of Veterans Affairs. Testing of psychometric properties and subsequent refinement should enhance the utility of the measures. PMID:22759451

48 CFR 52.222-23 - Notice of Requirement for Affirmative Action To Ensure Equal Employment Opportunity for...

Code of Federal Regulations, 2011 CFR

2011-10-01

... aggregate workforce in each trade on all construction work in the covered area, are as follows: Goals for... all the Contractor's construction work performed in the covered area. If the Contractor performs construction work in a geographical area located outside of the covered area, the Contractor shall apply the...