Sample records for consumer electronics

  1. 47 CFR 15.118 - Cable ready consumer electronics equipment.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Cable ready consumer electronics equipment. 15... Unintentional Radiators § 15.118 Cable ready consumer electronics equipment. (a) All consumer electronics TV... provisions of this section. Consumer electronics TV receiving equipment that includes features intended for...

  2. 47 CFR 15.118 - Cable ready consumer electronics equipment.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 1 2012-10-01 2012-10-01 false Cable ready consumer electronics equipment. 15... Unintentional Radiators § 15.118 Cable ready consumer electronics equipment. (a) All consumer electronics TV... provisions of this section. Consumer electronics TV receiving equipment that includes features intended for...

  3. 47 CFR 15.118 - Cable ready consumer electronics equipment.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 1 2011-10-01 2011-10-01 false Cable ready consumer electronics equipment. 15... Unintentional Radiators § 15.118 Cable ready consumer electronics equipment. (a) All consumer electronics TV... provisions of this section. Consumer electronics TV receiving equipment that includes features intended for...

  4. 47 CFR 15.118 - Cable ready consumer electronics equipment.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 1 2014-10-01 2014-10-01 false Cable ready consumer electronics equipment. 15... Unintentional Radiators § 15.118 Cable ready consumer electronics equipment. (a) All consumer electronics TV... provisions of this section. Consumer electronics TV receiving equipment that includes features intended for...

  5. 47 CFR 15.118 - Cable ready consumer electronics equipment.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 1 2013-10-01 2013-10-01 false Cable ready consumer electronics equipment. 15... Unintentional Radiators § 15.118 Cable ready consumer electronics equipment. (a) All consumer electronics TV... provisions of this section. Consumer electronics TV receiving equipment that includes features intended for...

  6. 78 FR 30934 - Certain Consumer Electronics With Display and Processing Capabilities; Notice of Receipt of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-23

    ... INTERNATIONAL TRADE COMMISSION [Docket No 2956] Certain Consumer Electronics With Display and... the U.S. International Trade Commission has received a complaint entitled Certain Consumer Electronics... consumer electronics with display and processing capabilities. The complaint names as respondents Panasonic...

  7. 77 FR 44671 - Certain Wireless Consumer Electronics Devices and Components Thereof; Notice of Receipt of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-30

    ... INTERNATIONAL TRADE COMMISSION [Docket No. 2904] Certain Wireless Consumer Electronics Devices and.... International Trade Commission has received a complaint entitled Certain Wireless Consumer Electronics Devices... importation, and the sale within the United States after importation of certain wireless consumer electronics...

  8. 76 FR 66666 - Basic Service Tier Encryption Compatibility Between Cable Systems and Consumer Electronics Equipment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-27

    ... 11-153] Basic Service Tier Encryption Compatibility Between Cable Systems and Consumer Electronics... substantially affect compatibility between cable service and consumer electronics equipment for most subscribers... problems between cable service and consumer electronics equipment were limiting and/or precluding the...

  9. 77 FR 67290 - Basic Service Tier Encryption Compatibility Between Cable Systems and Consumer Electronics Equipment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-09

    ...-126] Basic Service Tier Encryption Compatibility Between Cable Systems and Consumer Electronics... between consumer electronics equipment (such as digital television sets) and newly encrypted cable service... Act''), Congress sought to make sure that consumer electronics equipment could receive cable...

  10. 77 FR 14422 - Certain Consumer Electronics and Display Devices and Products Containing Same; Notice of Receipt...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-09

    ... INTERNATIONAL TRADE COMMISSION [DN 2882] Certain Consumer Electronics and Display Devices and... the U.S. International Trade Commission has received a complaint entitled Certain Consumer Electronics... importation of certain consumer electronics and display devices and products containing same. The complaint...

  11. 76 FR 72439 - Certain Consumer Electronics and Display Devices and Products Containing Same; Receipt of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-23

    ... INTERNATIONAL TRADE COMMISSION [DN 2858] Certain Consumer Electronics and Display Devices and.... International Trade Commission has received a complaint entitled In Re Certain Consumer Electronics and Display... importation of certain consumer electronics and display devices and products containing same. The complaint...

  12. 78 FR 14835 - Investigations: Terminations, Modifications and Rulings: Certain Consumer Electronics and Display...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-07

    ..., Modifications and Rulings: Certain Consumer Electronics and Display Devices and Products Containing Same AGENCY... the sale within the United States after importation of certain consumer electronics devices and..., Washington; LG Electronics, Inc. of Seoul, South Korea; LG Electronics, Mobilecomm U.S.A., Inc. of San Diego...

  13. 77 FR 18860 - Certain Consumer Electronics, Including Mobile Phones and Tablets; Notice of Receipt of Complaint...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-28

    ... INTERNATIONAL TRADE COMMISSION [DN 2885] Certain Consumer Electronics, Including Mobile Phones and.... International Trade Commission has received a complaint entitled Certain Consumer Electronics, Including Mobile... electronics, including mobile phones and tablets. The complaint names as respondents ASUSTeK Computer, Inc. of...

  14. 78 FR 38072 - Certain Consumer Electronics With Display and Processing Capabilities; Institution of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-25

    ... INTERNATIONAL TRADE COMMISSION [Inv. No. 337-TA-884] Certain Consumer Electronics With Display and... electronics with display and processing capabilities by reason of infringement of U.S. Patent No. 6,650,327... after importation of certain consumer electronics with display and processing capabilities by reason of...

  15. 77 FR 51572 - Certain Wireless Consumer Electronics Devices and Components Thereof; Institution of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-24

    ... Electronics Devices and Components Thereof; Institution of Investigation Pursuant to 19 U.S.C. 1337 AGENCY: U... importation of certain wireless consumer electronics devices and components thereof by reason of infringement... wireless consumer electronics devices and components thereof that infringe one or more of claims 1, 6, 7, 9...

  16. 77 FR 21584 - Certain Consumer Electronics and Display Devices and Products Containing Same; Institution of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-10

    ... INTERNATIONAL TRADE COMMISSION [Inv. No. 337-TA-836] Certain Consumer Electronics and Display... electronics and display devices and products containing same by reason of infringement of certain claims of U... importation, or the sale within the United States after importation of certain consumer electronics and...

  17. 47 CFR 76.630 - Compatibility with consumer electronics equipment.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Compatibility with consumer electronics equipment. 76.630 Section 76.630 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST... Compatibility with consumer electronics equipment. (a) Cable system operators shall not scramble or otherwise...

  18. 47 CFR 76.630 - Compatibility with consumer electronics equipment.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 4 2011-10-01 2011-10-01 false Compatibility with consumer electronics equipment. 76.630 Section 76.630 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST... Compatibility with consumer electronics equipment. (a) Cable system operators shall not scramble or otherwise...

  19. 47 CFR 76.630 - Compatibility with consumer electronics equipment.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 4 2014-10-01 2014-10-01 false Compatibility with consumer electronics equipment. 76.630 Section 76.630 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST... Compatibility with consumer electronics equipment. (a) Cable system operators shall not scramble or otherwise...

  20. 47 CFR 76.630 - Compatibility with consumer electronics equipment.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 4 2013-10-01 2013-10-01 false Compatibility with consumer electronics equipment. 76.630 Section 76.630 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST... Compatibility with consumer electronics equipment. (a) Cable system operators shall not scramble or otherwise...

  1. 47 CFR 76.630 - Compatibility with consumer electronics equipment.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 4 2012-10-01 2012-10-01 false Compatibility with consumer electronics equipment. 76.630 Section 76.630 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST... Compatibility with consumer electronics equipment. (a) Cable system operators shall not scramble or otherwise...

  2. 12 CFR 1005.7 - Initial disclosures.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... disclosures required by this section at the time a consumer contracts for an electronic fund transfer service or before the first electronic fund transfer is made involving the consumer's account. (b) Content of... Banks and Banking BUREAU OF CONSUMER FINANCIAL PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E...

  3. 75 FR 27256 - Implementation of Section 304 of the Telecommunications Act of 1996: Commercial Availability of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-14

    ... Availability of Navigation Devices; Compatibility Between Cable Systems and Consumer Electronics Equipment... cable operators and the consumer electronics industry to establish the technical details of the... Cable and Telecommunications Association and the Consumer Electronics Association had agreed in a...

  4. 12 CFR 226.5 - General disclosure requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... conspicuously in writing, 7 in a form that the consumer may keep. 8 The disclosures required by this subpart may be provided to the consumer in electronic form, subject to compliance with the consumer consent and... to the consumer in electronic form without regard to the consumer consent or other provisions of the...

  5. 12 CFR 1005.3 - Coverage.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ...-time electronic fund transfer from a consumer's account. The consumer must authorize the transfer. (ii... one-time electronic fund transfer (in providing a check to a merchant or other payee for the MICR... transfer. A consumer authorizes a one-time electronic fund transfer from his or her account to pay the fee...

  6. 12 CFR 1005.6 - Liability of consumer for unauthorized transfers.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... transfers. 1005.6 Section 1005.6 Banks and Banking BUREAU OF CONSUMER FINANCIAL PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E) § 1005.6 Liability of consumer for unauthorized transfers. (a) Conditions for..., for an unauthorized electronic fund transfer involving the consumer's account only if the financial...

  7. Analyzing the environmental impacts of laptop enclosures using screening-level life cycle assessment to support sustainable consumer electronics (j/a)

    EPA Science Inventory

    The market growth of consumer electronics makes it essential for industries and policy-makers to work together to develop sustainable products. The objective of this study is to better understand how to promote environmentally sustainable consumer electronics by examining the use...

  8. High-performance green flexible electronics based on biodegradable cellulose nanofibril paper

    PubMed Central

    Jung, Yei Hwan; Chang, Tzu-Hsuan; Zhang, Huilong; Yao, Chunhua; Zheng, Qifeng; Yang, Vina W.; Mi, Hongyi; Kim, Munho; Cho, Sang June; Park, Dong-Wook; Jiang, Hao; Lee, Juhwan; Qiu, Yijie; Zhou, Weidong; Cai, Zhiyong; Gong, Shaoqin; Ma, Zhenqiang

    2015-01-01

    Today's consumer electronics, such as cell phones, tablets and other portable electronic devices, are typically made of non-renewable, non-biodegradable, and sometimes potentially toxic (for example, gallium arsenide) materials. These consumer electronics are frequently upgraded or discarded, leading to serious environmental contamination. Thus, electronic systems consisting of renewable and biodegradable materials and minimal amount of potentially toxic materials are desirable. Here we report high-performance flexible microwave and digital electronics that consume the smallest amount of potentially toxic materials on biobased, biodegradable and flexible cellulose nanofibril papers. Furthermore, we demonstrate gallium arsenide microwave devices, the consumer wireless workhorse, in a transferrable thin-film form. Successful fabrication of key electrical components on the flexible cellulose nanofibril paper with comparable performance to their rigid counterparts and clear demonstration of fungal biodegradation of the cellulose-nanofibril-based electronics suggest that it is feasible to fabricate high-performance flexible electronics using ecofriendly materials. PMID:26006731

  9. High-performance green flexible electronics based on biodegradable cellulose nanofibril paper.

    PubMed

    Jung, Yei Hwan; Chang, Tzu-Hsuan; Zhang, Huilong; Yao, Chunhua; Zheng, Qifeng; Yang, Vina W; Mi, Hongyi; Kim, Munho; Cho, Sang June; Park, Dong-Wook; Jiang, Hao; Lee, Juhwan; Qiu, Yijie; Zhou, Weidong; Cai, Zhiyong; Gong, Shaoqin; Ma, Zhenqiang

    2015-05-26

    Today's consumer electronics, such as cell phones, tablets and other portable electronic devices, are typically made of non-renewable, non-biodegradable, and sometimes potentially toxic (for example, gallium arsenide) materials. These consumer electronics are frequently upgraded or discarded, leading to serious environmental contamination. Thus, electronic systems consisting of renewable and biodegradable materials and minimal amount of potentially toxic materials are desirable. Here we report high-performance flexible microwave and digital electronics that consume the smallest amount of potentially toxic materials on biobased, biodegradable and flexible cellulose nanofibril papers. Furthermore, we demonstrate gallium arsenide microwave devices, the consumer wireless workhorse, in a transferrable thin-film form. Successful fabrication of key electrical components on the flexible cellulose nanofibril paper with comparable performance to their rigid counterparts and clear demonstration of fungal biodegradation of the cellulose-nanofibril-based electronics suggest that it is feasible to fabricate high-performance flexible electronics using ecofriendly materials.

  10. High-performance green flexible electronics based on biodegradable cellulose nanofibril paper

    NASA Astrophysics Data System (ADS)

    Jung, Yei Hwan; Chang, Tzu-Hsuan; Zhang, Huilong; Yao, Chunhua; Zheng, Qifeng; Yang, Vina W.; Mi, Hongyi; Kim, Munho; Cho, Sang June; Park, Dong-Wook; Jiang, Hao; Lee, Juhwan; Qiu, Yijie; Zhou, Weidong; Cai, Zhiyong; Gong, Shaoqin; Ma, Zhenqiang

    2015-05-01

    Today's consumer electronics, such as cell phones, tablets and other portable electronic devices, are typically made of non-renewable, non-biodegradable, and sometimes potentially toxic (for example, gallium arsenide) materials. These consumer electronics are frequently upgraded or discarded, leading to serious environmental contamination. Thus, electronic systems consisting of renewable and biodegradable materials and minimal amount of potentially toxic materials are desirable. Here we report high-performance flexible microwave and digital electronics that consume the smallest amount of potentially toxic materials on biobased, biodegradable and flexible cellulose nanofibril papers. Furthermore, we demonstrate gallium arsenide microwave devices, the consumer wireless workhorse, in a transferrable thin-film form. Successful fabrication of key electrical components on the flexible cellulose nanofibril paper with comparable performance to their rigid counterparts and clear demonstration of fungal biodegradation of the cellulose-nanofibril-based electronics suggest that it is feasible to fabricate high-performance flexible electronics using ecofriendly materials.

  11. 12 CFR 1005.6 - Liability of consumer for unauthorized transfers.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... transfers. 1005.6 Section 1005.6 Banks and Banking BUREAU OF CONSUMER FINANCIAL PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E) General § 1005.6 Liability of consumer for unauthorized transfers. (a) Conditions... this section, for an unauthorized electronic fund transfer involving the consumer's account only if the...

  12. 12 CFR 1005.6 - Liability of consumer for unauthorized transfers.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... transfers. 1005.6 Section 1005.6 Banks and Banking BUREAU OF CONSUMER FINANCIAL PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E) General § 1005.6 Liability of consumer for unauthorized transfers. (a) Conditions... this section, for an unauthorized electronic fund transfer involving the consumer's account only if the...

  13. Japan's electronic packaging technologies

    NASA Technical Reports Server (NTRS)

    Tummala, Rao R.; Pecht, Michael

    1995-01-01

    The JTEC panel found Japan to have significant leadership over the United States in the strategic area of electronic packaging. Many technologies and products once considered the 'heart and soul' of U.S. industry have been lost over the past decades to Japan and other Asian countries. The loss of consumer electronics technologies and products is the most notable of these losses, because electronics is the United States' largest employment sector and is critical for growth businesses in consumer products, computers, automobiles, aerospace, and telecommunications. In the past there was a distinction between consumer and industrial product technologies. While Japan concentrated on the consumer market, the United States dominated the industrial sector. No such distinction is anticipated in the future; the consumer-oriented technologies Japan has dominated are expected to characterize both domains. The future of U.S. competitiveness will, therefore, depend on the ability of the United States to rebuild its technological capabilities in the area of portable electronic packaging.

  14. 78 FR 71643 - Certain Wireless Consumer Electronics Devices and Components Thereof; Commission Determination To...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-29

    ... Electronics Devices and Components Thereof; Commission Determination To Review in Part A Final Initial... sale within the United States after importation of certain wireless consumer electronics devices and... Electronics, Inc. of Seoul, Korea and LG Electronics U.S.A., Inc. of Englewood Cliffs, New Jersey...

  15. 12 CFR 205.9 - Receipts at electronic terminals; periodic statements.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.9 Receipts at electronic terminals; periodic..., a financial institution shall make a receipt available to a consumer at the time the consumer initiates an electronic fund transfer at an electronic terminal. The receipt shall set forth the following...

  16. 12 CFR 205.9 - Receipts at electronic terminals; periodic statements.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.9 Receipts at electronic terminals; periodic..., a financial institution shall make a receipt available to a consumer at the time the consumer initiates an electronic fund transfer at an electronic terminal. The receipt shall set forth the following...

  17. 12 CFR 205.9 - Receipts at electronic terminals; periodic statements.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.9 Receipts at electronic terminals; periodic..., a financial institution shall make a receipt available to a consumer at the time the consumer initiates an electronic fund transfer at an electronic terminal. The receipt shall set forth the following...

  18. 12 CFR 205.9 - Receipts at electronic terminals; periodic statements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.9 Receipts at electronic terminals; periodic..., a financial institution shall make a receipt available to a consumer at the time the consumer initiates an electronic fund transfer at an electronic terminal. The receipt shall set forth the following...

  19. 12 CFR 205.9 - Receipts at electronic terminals; periodic statements.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.9 Receipts at electronic terminals; periodic..., a financial institution shall make a receipt available to a consumer at the time the consumer initiates an electronic fund transfer at an electronic terminal. The receipt shall set forth the following...

  20. 16 CFR 1500.88 - Exemptions from lead limits under section 101 of the Consumer Product Safety Improvement Act for...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 101 of the Consumer Product Safety Improvement Act for certain electronic devices. 1500.88 Section... from lead limits under section 101 of the Consumer Product Safety Improvement Act for certain electronic devices. (a) The Consumer Product Safety Improvement Act (CPSIA) provides for specific lead limits...

  1. 12 CFR 1005.14 - Electronic fund transfer service provider not holding consumer's account.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 12 Banks and Banking 8 2012-01-01 2012-01-01 false Electronic fund transfer service provider not... PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E) § 1005.14 Electronic fund transfer service provider not holding consumer's account. (a) Provider of electronic fund transfer service. A person that provides an...

  2. 12 CFR 1005.14 - Electronic fund transfer service provider not holding consumer's account.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 8 2013-01-01 2013-01-01 false Electronic fund transfer service provider not... PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E) General § 1005.14 Electronic fund transfer service provider not holding consumer's account. (a) Provider of electronic fund transfer service. A person that...

  3. 12 CFR 1005.14 - Electronic fund transfer service provider not holding consumer's account.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 8 2014-01-01 2014-01-01 false Electronic fund transfer service provider not... PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E) General § 1005.14 Electronic fund transfer service provider not holding consumer's account. (a) Provider of electronic fund transfer service. A person that...

  4. 78 FR 56245 - Certain Wireless Consumer Electronics Devices and Components Thereof; Notice of Request for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-12

    ... Electronics Devices and Components Thereof; Notice of Request for Statements on the Public Interest AGENCY: U... wireless consumer electronics devices and components thereof imported by respondents Acer, Inc. of Taipei... Communications, Inc. of San Diego, California; LG Electronics, Inc. of Seoul, Korea; LG Electronics U.S.A., Inc...

  5. High-performance green flexible electronics based on biodegradable cellulose nanofibril paper

    Treesearch

    Yei Hwan Jung; Tzu-Hsuan Chang; Huilong Zhang; Chunhua Yao; Qifeng Zheng; Vina W. Yang; Hongyi Mi; Munho Kim; Sang June Cho; Dong-Wook Park; Hao Jiang; Juhwan Lee; Yijie Qiu; Weidong Zhou; Zhiyong Cai; Shaoqin Gong; Zhenqiang Ma

    2015-01-01

    Today’s consumer electronics, such as cell phones, tablets and other portable electronic devices, are typically made of non-renewable, non-biodegradable, and sometimes potentially toxic (for example, gallium arsenide) materials. These consumer electronics are frequently upgraded or discarded, leading to serious environmental contamination. Thus, electronic systems...

  6. Benefits and Risks of Electronic Medical Record (EMR): An Interpretive Analysis of Healthcare Consumers' Perceptions of an Evolving Health Information Systems Technology

    ERIC Educational Resources Information Center

    Thompson, Chester D.

    2013-01-01

    The purpose of this study is to explore healthcare consumers' perceptions of their Electronic Medical Records (EMRs). Although there have been numerous studies regarding EMRs, there have been minimal, if any, research that explores healthcare consumers' awareness of this technology and the social implications that result. As consumers' health…

  7. 12 CFR 1005.9 - Receipts at electronic terminals; periodic statements.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... TRANSFERS (REGULATION E) General § 1005.9 Receipts at electronic terminals; periodic statements. (a... institution shall make a receipt available to a consumer at the time the consumer initiates an electronic fund transfer at an electronic terminal. The receipt shall set forth the following information, as applicable...

  8. 12 CFR 1005.9 - Receipts at electronic terminals; periodic statements.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... TRANSFERS (REGULATION E) General § 1005.9 Receipts at electronic terminals; periodic statements. (a... institution shall make a receipt available to a consumer at the time the consumer initiates an electronic fund transfer at an electronic terminal. The receipt shall set forth the following information, as applicable...

  9. 12 CFR 1005.9 - Receipts at electronic terminals; periodic statements.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... TRANSFERS (REGULATION E) § 1005.9 Receipts at electronic terminals; periodic statements. (a) Receipts at... shall make a receipt available to a consumer at the time the consumer initiates an electronic fund transfer at an electronic terminal. The receipt shall set forth the following information, as applicable...

  10. Building a Terabyte Memory Bandwidth Compute Node with Four Consumer Electronics GPUs

    NASA Astrophysics Data System (ADS)

    Omlin, Samuel; Räss, Ludovic; Podladchikov, Yuri

    2014-05-01

    GPUs released for consumer electronics are generally built with the same chip architectures as the GPUs released for professional usage. With regards to scientific computing, there are no obvious important differences in functionality or performance between the two types of releases, yet the price can differ up to one order of magnitude. For example, the consumer electronics release of the most recent NVIDIA Kepler architecture (GK110), named GeForce GTX TITAN, performed equally well in conducted memory bandwidth tests as the professional release, named Tesla K20; the consumer electronics release costs about one third of the professional release. We explain how to design and assemble a well adjusted computer with four high-end consumer electronics GPUs (GeForce GTX TITAN) combining more than 1 terabyte/s memory bandwidth. We compare the system's performance and precision with the one of hardware released for professional usage. The system can be used as a powerful workstation for scientific computing or as a compute node in a home-built GPU cluster.

  11. 12 CFR 1005.3 - Coverage.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Banking BUREAU OF CONSUMER FINANCIAL PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E) General § 1005.3... Consumer Financial Protection Act of 2010, Title X of the Dodd-Frank Wall Street Reform and Consumer Protection Act, Public Law 111-203, 124 Stat. 1376. (b) Electronic fund transfer. (1) Definition. The term...

  12. 12 CFR 1005.3 - Coverage.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Banking BUREAU OF CONSUMER FINANCIAL PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E) § 1005.3 Coverage... Consumer Financial Protection Act of 2010, Title X of the Dodd-Frank Wall Street Reform and Consumer Protection Act, Public Law 111-203, 124 Stat. 1376. (b) Electronic fund transfer—(1) Definition. The term...

  13. 12 CFR 205.11 - Procedures for resolving errors.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... institution's findings and shall note the consumer's right to request the documents that the institution... transfer; (ii) An incorrect electronic fund transfer to or from the consumer's account; (iii) The omission... made by the financial institution relating to an electronic fund transfer; (v) The consumer's receipt...

  14. The market of electrical and electronic equipment waste in Portugal: Analysis of take-back consumers' decisions.

    PubMed

    Botelho, Anabela; Ferreira Dias, Marta; Ferreira, Carla; Pinto, Lígia M Costa

    2016-10-01

    This paper aims to ascertain the efficacy and acceptability of five incentive schemes for the take-back of waste electrical and electronic equipment in Portugal, focusing in consumers' perspectives. It assesses users' perception of these items, evaluating the motivations and interests they have concerning the market of waste electrical and electronic equipment. Results indicate, on one hand, a lack of awareness by consumers about the process of take-back of their equipment. On the other hand, results show that information conditions and socio-demographic factors affect consumers' motivations for returning the electrical and electronic equipment at the end of life. In this context, it can be concluded that, in Portugal, the market for the recovery of waste electrical and electronic equipment is still in its infancy. © The Author(s) 2016.

  15. 12 CFR 40.7 - Form of opt out notice to consumers; opt out methods.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., if the consumer agrees, electronically. (2) When a customer relationship terminates, the customer's... during or related to that relationship. If the individual subsequently establishes a new customer... opt out notice in writing or, if the consumer agrees, electronically. (d) Joint relationships. (1) If...

  16. 16 CFR 313.7 - Form of opt out notice to consumers; opt out methods.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., electronically. (2) When a customer relationship terminates, the customer's opt out direction continues to apply... the individual subsequently establishes a new customer relationship with you, the opt out direction... writing or, if the consumer agrees, electronically. (d) Joint relationships—(1) If two or more consumers...

  17. 12 CFR 332.7 - Form of opt out notice to consumers; opt out methods.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., electronically. (2) When a customer relationship terminates, the customer's opt out direction continues to apply... the individual subsequently establishes a new customer relationship with you, the opt out direction... writing or, if the consumer agrees, electronically. (d) Joint relationships—(1) If two or more consumers...

  18. 12 CFR 216.7 - Form of opt out notice to consumers; opt out methods.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., electronically. (2) When a customer relationship terminates, the customer's opt out direction continues to apply... the individual subsequently establishes a new customer relationship with you, the opt out direction... writing or, if the consumer agrees, electronically. (d) Joint relationships—(1) If two or more consumers...

  19. 12 CFR 205.3 - Coverage.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... to initiate a one-time electronic fund transfer from a consumer's account. The consumer must...-time electronic fund transfer (in providing a check to a merchant or other payee for the MICR encoding... information for the transfer shall also provide a notice to the consumer at the same time it provides the...

  20. 12 CFR 205.3 - Coverage.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... to initiate a one-time electronic fund transfer from a consumer's account. The consumer must...-time electronic fund transfer (in providing a check to a merchant or other payee for the MICR encoding... information for the transfer shall also provide a notice to the consumer at the same time it provides the...

  1. 12 CFR 205.3 - Coverage.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... to initiate a one-time electronic fund transfer from a consumer's account. The consumer must...-time electronic fund transfer (in providing a check to a merchant or other payee for the MICR encoding... information for the transfer shall also provide a notice to the consumer at the same time it provides the...

  2. 12 CFR 205.14 - Electronic fund transfer service provider not holding consumer's account.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... consumer learns of the loss or theft; and extends the time periods for reporting unauthorized transfers or... 12 Banks and Banking 2 2010-01-01 2010-01-01 false Electronic fund transfer service provider not... GOVERNORS OF THE FEDERAL RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.14 Electronic fund...

  3. 12 CFR 205.14 - Electronic fund transfer service provider not holding consumer's account.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... consumer learns of the loss or theft; and extends the time periods for reporting unauthorized transfers or... 12 Banks and Banking 2 2013-01-01 2013-01-01 false Electronic fund transfer service provider not... GOVERNORS OF THE FEDERAL RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.14 Electronic fund...

  4. 12 CFR 205.14 - Electronic fund transfer service provider not holding consumer's account.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... consumer learns of the loss or theft; and extends the time periods for reporting unauthorized transfers or... 12 Banks and Banking 2 2014-01-01 2014-01-01 false Electronic fund transfer service provider not... GOVERNORS OF THE FEDERAL RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.14 Electronic fund...

  5. 12 CFR 205.14 - Electronic fund transfer service provider not holding consumer's account.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... consumer learns of the loss or theft; and extends the time periods for reporting unauthorized transfers or... 12 Banks and Banking 2 2011-01-01 2011-01-01 false Electronic fund transfer service provider not... GOVERNORS OF THE FEDERAL RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.14 Electronic fund...

  6. 12 CFR 205.14 - Electronic fund transfer service provider not holding consumer's account.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... consumer learns of the loss or theft; and extends the time periods for reporting unauthorized transfers or... 12 Banks and Banking 2 2012-01-01 2012-01-01 false Electronic fund transfer service provider not... GOVERNORS OF THE FEDERAL RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.14 Electronic fund...

  7. Consumer Information in the Electronic Media: Neutral Information, Advertising, Selling. Working Paper No. 4.

    ERIC Educational Resources Information Center

    Sepstrup, Preben; Olander, Folke

    This paper presents a self-contained summary in English of the results of a research project conducted for the Nordic Council of Ministers to define problems, advantages, and disadvantages of the electronic dissemination of information for consumers, and to determine whether consumer organizations should adapt their information activities and…

  8. Short pulse free electron laser amplifier

    DOEpatents

    Schlitt, Leland G.; Szoke, Abraham

    1985-01-01

    Method and apparatus for amplification of a laser pulse in a free electron laser amplifier where the laser pulse duration may be a small fraction of the electron beam pulse duration used for amplification. An electron beam pulse is passed through a first wiggler magnet and a short laser pulse to be amplified is passed through the same wiggler so that only the energy of the last fraction, f, (f<1) of the electron beam pulse is consumed in amplifying the laser pulse. After suitable delay of the electron beam, the process is repeated in a second wiggler magnet, a third, . . . , where substantially the same fraction f of the remainder of the electron beam pulse is consumed in amplification of the given short laser pulse in each wiggler magnet region until the useful electron beam energy is substantially completely consumed by amplification of the laser pulse.

  9. 77 FR 31876 - Certain Consumer Electronics and Display Devices and Products Containing Same Determination Not...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-30

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-836] Certain Consumer Electronics and Display Devices and Products Containing Same Determination Not To Review Initial Determination To Amend... electronics and display devices and products containing the same by reason of infringement of U.S. Patent Nos...

  10. 78 FR 49365 - Electronic Fund Transfers (Regulation E); Correction

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-14

    ... BUREAU OF CONSUMER FINANCIAL PROTECTION 12 CFR Part 1005 [Docket No. CFPB-2012-0050] RIN 3170-AA33 Electronic Fund Transfers (Regulation E); Correction AGENCY: Bureau of Consumer Financial Protection. ACTION... 2013 Final Rule, which along with three other final rules \\1\\ implements the Electronic Fund Transfer...

  11. Consumer Cost Differences for Traditional and Internet Markets.

    ERIC Educational Resources Information Center

    Shaw, Michael J.; Strader, Troy J.

    1999-01-01

    Addresses research issues related to the economics of electronic, Internet-based markets. Discusses consumer cost-based differences for traditional and electronic markets; revenue implications for sellers and transaction intermediaries; and results of an empirical, survey-based study of an electronic market in the sports trading-card industry.…

  12. 75 FR 19959 - Energy Conservation Program for Consumer Products: Notice of Petition for Waiver of Samsung...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-16

    ... Conservation Program for Consumer Products: Notice of Petition for Waiver of Samsung Electronics America, Inc.... SUMMARY: This notice announces receipt of and publishes the Samsung Electronics America, Inc. (Samsung... information for the petitioner is: Mr. Michael Moss, Samsung Electronics America, Inc., 18600 Broadwick St...

  13. 76 FR 21881 - Energy Conservation Program for Consumer Products: Notice of Petition for Waiver of Samsung...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-19

    ... Conservation Program for Consumer Products: Notice of Petition for Waiver of Samsung Electronics America, Inc... comments. SUMMARY: This notice announces receipt of and publishes the Samsung Electronics America, Inc..., Samsung Electronics America, Inc., 18600 Broadwick Street, Rancho Dominguez, CA 90220. According to 10 CFR...

  14. 76 FR 11228 - Energy Conservation Program for Consumer Products: Notice of Petition for Waiver of LG...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-01

    ... Conservation Program for Consumer Products: Notice of Petition for Waiver of LG Electronics USA, Inc. From the... notice announces receipt of and publishes the LG Electronics USA, Inc. (LG) petition for waiver and... is: John I. Taylor, Vice President, Government Relations and Communications, LG Electronics USA, Inc...

  15. 75 FR 45623 - Energy Conservation Program for Consumer Products: Decision and Order Granting a Waiver to...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-03

    ... Conservation Program for Consumer Products: Decision and Order Granting a Waiver to Samsung Electronics America...-014) that grants to Samsung Electronics America, Inc. (Samsung) a waiver from the DOE electric... Energy. Decision and Order In the Matter of: Samsung Electronics America, Inc. (Case No. RF- 014...

  16. Consumer Electronics Testing to Fast-Rise EMP (Electromagnetic Pulse) (VEMPS (Vertical Electromagnetic Pulse Simulator) 2 Development)

    DTIC Science & Technology

    1989-06-01

    Fast-Rise EMP ( VEMPS 11 Development) 12. PERSONAL AUTHOR(S) Vincent J. Ellis 13a. TYPE OF REPORT 13b. TIME COVERED 14. DATE OF REPORT (Year Mot.Dy...SUBJECT TERMS (Continue on reverse if necessary andJ identity by block nwitib") 09EL 03U SBGR EMP, VEMPS 11, consumer electronics, FEMPS, EMP simulation... VEMPS 11), Because of the unique petrr! ance characteristics of VEMPS 11 and the technological changes In consumer electronics over the past 10 years

  17. Trampoline Safety in Childhood and Adolescence

    MedlinePlus

    ... ABBREVIATIONS AAP — American Academy of Pediatrics NEISS — National Electronic Injury Surveillance System USCPSC — US Consumer Product Safety ... US Consumer Product Safety Com- mission ’ s (USCPSC) National Electronic Injury Surveillance System (NEISS). 6 Trampoline injuries increased ...

  18. 77 FR 11156 - Notice of Receipt of Complaint; Solicitation of Comments Relating to the Public Interest

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-24

    ... Certain Consumer Electronics, Including Mobile Phones and Tablets, DN 2878; the Commission is soliciting... importation of certain consumer electronics, including mobile phones and tablets. The complaint names as...

  19. 76 FR 13169 - Energy Conservation Program for Consumer Products: Decision and Order Granting a Waiver to...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-10

    ... Conservation Program for Consumer Products: Decision and Order Granting a Waiver to Samsung Electronics America... Electronics America, Inc. (Samsung) a waiver from the DOE clothes washer test procedure for determining the.... Decision and Order In the Matter of: Samsung Electronics America, Inc. (Case No. CW- 014) I. Background and...

  20. 75 FR 13120 - Energy Conservation Program for Consumer Products: Decision and Order Granting a Waiver to...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-18

    ... Conservation Program for Consumer Products: Decision and Order Granting a Waiver to Samsung Electronics America... (Case No. RF-011) that grants to Samsung Electronics America, Inc. (Samsung) a waiver from the DOE... and Order In the Matter of: Samsung Electronics America, Inc. (Case No. RF- 011). Background Title III...

  1. 75 FR 71680 - Energy Conservation Program for Consumer Products: Notice of Petition for Waiver of LG...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-24

    ... Conservation Program for Consumer Products: Notice of Petition for Waiver of LG Electronics USA, Inc. from the... and publishes the LG Electronics USA, Inc. (LG) petition for waiver (hereafter, ``petition'') from... Communications, LG Electronics USA, Inc., 1776 K Street, NW., Washington, DC 20006; (202) 719-3490; E-mail: john...

  2. Electronics manufacturing and assembly in Japan

    NASA Technical Reports Server (NTRS)

    Kukowski, John A.; Boulton, William R.

    1995-01-01

    In the consumer electronics industry, precision processing technology is the basis for enhancing product functions and for minimizing components and end products. Throughout Japan, manufacturing technology is seen as critical to the production and assembly of advanced products. While its population has increased less than 30 percent over twenty-five years, Japan's gross national product has increase thirtyfold; this growth has resulted in large part from rapid replacement of manual operations with innovative, high-speed, large-scale, continuously running, complex machines that process a growing number of miniaturized components. The JTEC panel found that introduction of next-generation electronics products in Japan goes hand-in-hand with introduction of new and improved production equipment. In the panel's judgment, Japan's advanced process technologies and equipment development and its highly automated factories are crucial elements of its domination of the consumer electronics marketplace - and Japan's expertise in manufacturing consumer electronics products gives it potentially unapproachable process expertise in all electronics markets.

  3. 16 CFR 682.1 - Definitions.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Practices FEDERAL TRADE COMMISSION THE FAIR CREDIT REPORTING ACT DISPOSAL OF CONSUMER REPORT INFORMATION AND..., whether in paper, electronic, or other form, that is a consumer report or is derived from a consumer report. Consumer information also means a compilation of such records. Consumer information does not...

  4. An investigation of used electronics return flows: a data-driven approach to capture and predict consumers storage and utilization behavior.

    PubMed

    Sabbaghi, Mostafa; Esmaeilian, Behzad; Raihanian Mashhadi, Ardeshir; Behdad, Sara; Cade, Willie

    2015-02-01

    Consumers often have a tendency to store their used, old or un-functional electronics for a period of time before they discard them and return them back to the waste stream. This behavior increases the obsolescence rate of used still-functional products leading to lower profitability that could be resulted out of End-of-Use (EOU) treatments such as reuse, upgrade, and refurbishment. These types of behaviors are influenced by several product and consumer-related factors such as consumers' traits and lifestyles, technology evolution, product design features, product market value, and pro-environmental stimuli. Better understanding of different groups of consumers, their utilization and storage behavior and the connection of these behaviors with product design features helps Original Equipment Manufacturers (OEMs) and recycling and recovery industry to better overcome the challenges resulting from the undesirable storage of used products. This paper aims at providing insightful statistical analysis of Electronic Waste (e-waste) dynamic nature by studying the effects of design characteristics, brand and consumer type on the electronics usage time and end of use time-in-storage. A database consisting of 10,063 Hard Disk Drives (HDD) of used personal computers returned back to a remanufacturing facility located in Chicago, IL, USA during 2011-2013 has been selected as the base for this study. The results show that commercial consumers have stored computers more than household consumers regardless of brand and capacity factors. Moreover, a heterogeneous storage behavior is observed for different brands of HDDs regardless of capacity and consumer type factors. Finally, the storage behavior trends are projected for short-time forecasting and the storage times are precisely predicted by applying machine learning methods. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. 78 FR 9667 - Foreign-Trade Zone 50-Long Beach, California; Notification of Proposed Production Activity...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-11

    ... Consumer Electronics); Anaheim, CA The Board of Harbor Commissioners of the Port of Long Beach, grantee of... located within Site 31 of FTZ 50. The facility is used for the kitting of consumer electronics parts into...

  6. 78 FR 12354 - Certain Wireless Consumer Electronics Devices and Components Thereof; Commission Determination...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-22

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-853] Certain Wireless Consumer Electronics Devices and Components Thereof; Commission Determination Concerning an Initial Determination Granting a Motion To Amend Complaint and Notice of Investigation AGENCY: U.S. International Trade...

  7. 12 CFR 205.7 - Initial disclosures.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... TRANSFERS (REGULATION E) § 205.7 Initial disclosures. (a) Timing of disclosures. A financial institution shall make the disclosures required by this section at the time a consumer contracts for an electronic fund transfer service or before the first electronic fund transfer is made involving the consumer's...

  8. 12 CFR 205.7 - Initial disclosures.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... TRANSFERS (REGULATION E) § 205.7 Initial disclosures. (a) Timing of disclosures. A financial institution shall make the disclosures required by this section at the time a consumer contracts for an electronic fund transfer service or before the first electronic fund transfer is made involving the consumer's...

  9. 12 CFR 205.15 - Electronic fund transfer of government benefits.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ...) Account balance. The means by which the consumer may obtain information concerning the account balance... history or other account information, under paragraph (c) of this section, in which the error is first... consumer for use in initiating an electronic fund transfer of government benefits from an account, other...

  10. Consumer Electronic Product Servicing. Florida Vocational Program Guide.

    ERIC Educational Resources Information Center

    University of South Florida, Tampa. Dept. of Adult and Vocational Education.

    This packet contains a program guide and Career Merit Achievement Plan (Career MAP) for the implementation of a consumer electronic product servicing program in Florida secondary and postsecondary schools. The program guide describes the program content and structure, provides a program description, lists job titles under the program, and includes…

  11. An investigation of used electronics return flows: A data-driven approach to capture and predict consumers storage and utilization behavior

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sabbaghi, Mostafa, E-mail: mostafas@buffalo.edu; Esmaeilian, Behzad, E-mail: b.esmaeilian@neu.edu; Raihanian Mashhadi, Ardeshir, E-mail: ardeshir@buffalo.edu

    Highlights: • We analyzed a data set of HDDs returned back to an e-waste collection site. • We studied factors that affect the storage behavior. • Consumer type, brand and size are among factors which affect the storage behavior. • Commercial consumers have stored computers more than household consumers. • Machine learning models were used to predict the storage behavior. - Abstract: Consumers often have a tendency to store their used, old or un-functional electronics for a period of time before they discard them and return them back to the waste stream. This behavior increases the obsolescence rate of usedmore » still-functional products leading to lower profitability that could be resulted out of End-of-Use (EOU) treatments such as reuse, upgrade, and refurbishment. These types of behaviors are influenced by several product and consumer-related factors such as consumers’ traits and lifestyles, technology evolution, product design features, product market value, and pro-environmental stimuli. Better understanding of different groups of consumers, their utilization and storage behavior and the connection of these behaviors with product design features helps Original Equipment Manufacturers (OEMs) and recycling and recovery industry to better overcome the challenges resulting from the undesirable storage of used products. This paper aims at providing insightful statistical analysis of Electronic Waste (e-waste) dynamic nature by studying the effects of design characteristics, brand and consumer type on the electronics usage time and end of use time-in-storage. A database consisting of 10,063 Hard Disk Drives (HDD) of used personal computers returned back to a remanufacturing facility located in Chicago, IL, USA during 2011–2013 has been selected as the base for this study. The results show that commercial consumers have stored computers more than household consumers regardless of brand and capacity factors. Moreover, a heterogeneous storage behavior is observed for different brands of HDDs regardless of capacity and consumer type factors. Finally, the storage behavior trends are projected for short-time forecasting and the storage times are precisely predicted by applying machine learning methods.« less

  12. 12 CFR 205.17 - Requirements for overdraft services.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... consumer agrees, electronically, which includes a statement informing the consumer of the right to revoke... explanation of the consumer's right to affirmatively consent to the financial institution's payment of... that the consumer has the right to opt into, or opt out of, the payment of overdrafts under the...

  13. Analyzing the Environmental Impacts of Laptop Enclosures Using Screening-Level Life Cycle Assessment to Support Sustainable Consumer Electronics

    EPA Science Inventory

    With the ever-increasing amount of consumer electronics in service, it is essential industries and policy-makers work together to develop ways to manufacture more environmentally sustainable IT products which meet the needs of society. The objective of this study was to better un...

  14. Electronics

    DTIC Science & Technology

    2001-01-01

    International Acer Incorporated, Hsin Chu, Taiwan Aerospace Industrial Development Corporation, Taichung, Taiwan American Institute of Taiwan, Taipei, Taiwan...Singapore and Malaysia .5 - 4 - The largest market for semiconductor products is the high technology consumer electronics industry that consumes up...Singapore, and Malaysia . A new semiconductor facility costs around $3 billion to build and takes about two years to become operational

  15. 76 FR 22103 - The Consumer and Governmental Affairs Bureau Seeks Comment on “Need for Speed” Information for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-20

    ... to make informed choices among competing broadband Internet access services. According to the most... speed and performance required for the range of Internet applications consumers intend to use, and how... electronically using the Internet by accessing the Commission's Electronic Comment Filing System (ECFS): http...

  16. American Gadgets: Cybernetics, Consumer Electronics, and Twentieth-Century US Fiction

    ERIC Educational Resources Information Center

    Simeone, Michael

    2011-01-01

    Challenging the argument that liberal humanism faces extinction in the face of ubiquitous digital technologies, my dissertation analyzes the ways in which consumer electronics reinscribe the human subject as a privileged category in the information age. Through spaces like the Matrix, Windows 7, or even the single row of play controls on a…

  17. Perceptions of chronically ill and healthy consumers about electronic personal health records: a comparative empirical investigation.

    PubMed

    Cocosila, Mihail; Archer, Norm

    2014-07-23

    To develop a model of consumer perceptions of electronic personal health records (PHRs) and validate it in a comparative study between consumers who report having a chronic illness and those who report being well. A model of PHR use motivators and barriers was built and tested through a national survey across Canada. Data were collected from 800 individuals, 18 years or older. Half reported having a chronic illness or disability and half reported being well. Analyses were performed with structural equation modelling techniques. A total of 389 answers from chronically ill and 383 from well participants were collected. Perceived usefulness was the key explanation of the intention to use PHRs for both ill and well people (total effect of 0.601 and 0.565, respectively) followed by security, privacy and trust in PHRs (total effect of 0.377 and 0.479, respectively). Conversely, computer anxiety was perceived as a significant barrier (total effect of -0.327 for ill individuals and -0.212 for well individuals). The model proposed was appropriate in explaining key consumer positive and negative perceptions on electronic PHR use. We found little difference in perceptions of electronic PHRs between chronically ill and well individuals, although self-reporting their health status might have influenced the results. To increase the adoption rate of electronic PHRs among both chronically ill and well consumers it is necessary to reinforce consumer perceptions of the usefulness of and trust in these eHealth technologies while mitigating their anxieties about computer use in general. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  18. Electronic manufacturing and packaging in Japan

    NASA Technical Reports Server (NTRS)

    Kelly, Michael J.; Boulton, William R. (Editor); Kukowski, John A.; Meieran, Eugene S.; Pecht, Michael; Peeples, John W.; Tummala, Rao R.

    1995-01-01

    This report summarizes the status of electronic manufacturing and packaging technology in Japan in comparison to that in the United States, and its impact on competition in electronic manufacturing in general. In addition to electronic manufacturing technologies, the report covers technology and manufacturing infrastructure, electronics manufacturing and assembly, quality assurance and reliability in the Japanese electronics industry, and successful product realization strategies. The panel found that Japan leads the United States in almost every electronics packaging technology. Japan clearly has achieved a strategic advantage in electronics production and process technologies. Panel members believe that Japanese competitors could be leading U.S. firms by as much as a decade in some electronics process technologies. Japan has established this marked competitive advantage in electronics as a consequence of developing low-cost, high-volume consumer products. Japan's infrastructure, and the remarkable cohesiveness of vision and purpose in government and industry, are key factors in the success of Japan's electronics industry. Although Japan will continue to dominate consumer electronics in the foreseeable future, opportunities exist for the United States and other industrial countries to capture an increasingly large part of the market. The JTEC panel has identified no insurmountable barriers that would prevent the United States from regaining a significant share of the consumer electronics market; in fact, there is ample evidence that the United States needs to aggressively pursue high-volume, low-cost electronic assembly, because it is a critical path leading to high-performance electronic systems.

  19. 77 FR 55833 - Announcement of Public Meeting on the Consumer Confidence Report (CCR) Rule Retrospective Review...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-11

    ... on the Consumer Confidence Report (CCR) Rule Retrospective Review and Request for Public Comment on... potential approaches for providing Consumer Confidence Reports (CCR) via electronic delivery. EPA plans to... meeting to give EPA time to process your request. Background Consumer Confidence Reports are a key part of...

  20. 17 CFR 248.125 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing..., such as by calling a single toll-free telephone number. (2) Opt out methods that are not reasonable and...

  1. 17 CFR 248.125 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing..., such as by calling a single toll-free telephone number. (2) Opt out methods that are not reasonable and...

  2. 17 CFR 248.125 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing..., such as by calling a single toll-free telephone number. (2) Opt out methods that are not reasonable and...

  3. 17 CFR 248.125 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing..., such as by calling a single toll-free telephone number. (2) Opt out methods that are not reasonable and...

  4. 17 CFR 248.125 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing..., such as by calling a single toll-free telephone number. (2) Opt out methods that are not reasonable and...

  5. 12 CFR 222.25 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing... by calling a single toll-free telephone number. (2) Opt-out methods that are not reasonable and...

  6. 12 CFR 222.25 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing... by calling a single toll-free telephone number. (2) Opt-out methods that are not reasonable and...

  7. 12 CFR 222.25 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing... by calling a single toll-free telephone number. (2) Opt-out methods that are not reasonable and...

  8. 12 CFR 222.25 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing... by calling a single toll-free telephone number. (2) Opt-out methods that are not reasonable and...

  9. 12 CFR 222.25 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing... by calling a single toll-free telephone number. (2) Opt-out methods that are not reasonable and...

  10. A Study of the Intent to Fully Utilize Electronic Personal Health Records in the Context of Privacy and Trust

    ERIC Educational Resources Information Center

    Richards, Rhonda J.

    2012-01-01

    Government initiatives called for electronic health records for each individual healthcare consumer by 2014. The purpose of the initiatives is to provide for the common exchange of clinical information between healthcare consumers, healthcare providers, third-party payers and public healthcare officials. This exchange of healthcare information…

  11. Microbial Electrosynthesis: Feeding Microbes Electricity To Convert Carbon Dioxide and Water to Multicarbon Extracellular Organic Compounds

    PubMed Central

    Nevin, Kelly P.; Woodard, Trevor L.; Franks, Ashley E.; Summers, Zarath M.; Lovley, Derek R.

    2010-01-01

    The possibility of providing the acetogenic microorganism Sporomusa ovata with electrons delivered directly to the cells with a graphite electrode for the reduction of carbon dioxide to organic compounds was investigated. Biofilms of S. ovata growing on graphite cathode surfaces consumed electrons with the reduction of carbon dioxide to acetate and small amounts of 2-oxobutyrate. Electrons appearing in these products accounted for over 85% of the electrons consumed. These results demonstrate that microbial production of multicarbon organic compounds from carbon dioxide and water with electricity as the energy source is feasible. PMID:20714445

  12. The relevance of netnography to the harness of Romanian health care electronic word-of-mouth.

    PubMed

    Bratucu, R; Gheorghe, I R; Radu, A; Purcarea, V L

    2014-09-15

    Nowadays, consumers use the computer mediated communication to make purchase decisions on a large variety of products and services. Since health care services are archetypal by nature, consumers in this field are one of the most encountered users of electronic word-of-mouth. The objective of this paper is to explain and support the necessity of adopting a different qualitative method when electronic word of mouth is harnessed on health care dedicated forums, that is, netnography.

  13. The relevance of netnography to the harness of Romanian health care electronic word-of-mouth

    PubMed Central

    Bratucu, R; Gheorghe, IR; Radu, A; Purcarea, VL

    2014-01-01

    Abstract Nowadays, consumers use the computer mediated communication to make purchase decisions on a large variety of products and services. Since health care services are archetypal by nature, consumers in this field are one of the most encountered users of electronic word-of-mouth. The objective of this paper is to explain and support the necessity of adopting a different qualitative method when electronic word of mouth is harnessed on health care dedicated forums, that is, netnography. PMID:25408755

  14. 12 CFR 222.24 - Reasonable opportunity to opt out.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... at an Internet Web site at which the consumer has obtained a product or service. The consumer... consumer at the time of an electronic transaction, such as a transaction conducted on an Internet Web site... one that allows consumers to indicate that they do not want to opt out. (5) By including in a privacy...

  15. A Literature Review of Word of Mouth and Electronic Word of Mouth: Implications for Consumer Behavior.

    PubMed

    Huete-Alcocer, Nuria

    2017-01-01

    The rise and spread of the Internet has led to the emergence of a new form of word of mouth (WOM): electronic word of mouth (eWOM), considered one of the most influential informal media among consumers, businesses, and the population at large. Drawing on these ideas, this paper reviews the relevant literature, analyzing the impact of traditional WOM and eWOM in the field of consumer behavior and highlighting the main differences between the two types of recommendations, with a view to contributing to a better understanding of the potential of both.

  16. A Literature Review of Word of Mouth and Electronic Word of Mouth: Implications for Consumer Behavior

    PubMed Central

    Huete-Alcocer, Nuria

    2017-01-01

    The rise and spread of the Internet has led to the emergence of a new form of word of mouth (WOM): electronic word of mouth (eWOM), considered one of the most influential informal media among consumers, businesses, and the population at large. Drawing on these ideas, this paper reviews the relevant literature, analyzing the impact of traditional WOM and eWOM in the field of consumer behavior and highlighting the main differences between the two types of recommendations, with a view to contributing to a better understanding of the potential of both. PMID:28790950

  17. 77 FR 30923 - Electronic Fund Transfers (Regulation E)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-24

    .... The Bureau seeks public input on the costs, and benefits, and consumer protection issues related to... interested in learning more about this product, including its costs, benefits, and risks to consumers. The... their costs, benefits, and risks to consumers. These comments, in conjunction with other outreach and...

  18. Distress and Other Situational Factors that Influence Consumer Willingness to Provide Personal Information in an Online Buyer-Seller Exchange: An Equity Theory Perspective

    ERIC Educational Resources Information Center

    Barto, Thomas Peter

    2011-01-01

    Global electronic markets will profoundly impact commerce in the 21 st century. Brick-and-mortar retailers are using technology for electronic marketing purposes where the familiar layout of the physical store becomes a maze of pulldown menus, product indices, and search features creating a new unknown for consumers and concerns for information…

  19. Extreme temperature packaging: challenges and opportunities

    NASA Astrophysics Data System (ADS)

    Johnson, R. Wayne

    2016-05-01

    Consumer electronics account for the majority of electronics manufactured today. Given the temperature limits of humans, consumer electronics are typically rated for operation from -40°C to +85°C. Military applications extend the range to -65°C to +125°C while underhood automotive electronics may see +150°C. With the proliferation of the Internet of Things (IoT), the goal of instrumenting (sensing, computation, transmission) to improve safety and performance in high temperature environments such as geothermal wells, nuclear reactors, combustion chambers, industrial processes, etc. requires sensors, electronics and packaging compatible with these environments. Advances in wide bandgap semiconductors (SiC and GaN) allow the fabrication of high temperature compatible sensors and electronics. Integration and packaging of these devices is required for implementation into actual applications. The basic elements of packaging are die attach, electrical interconnection and the package or housing. Consumer electronics typically use conductive adhesives or low melting point solders for die attach, wire bonds or low melting solder for electrical interconnection and epoxy for the package. These materials melt or decompose in high temperature environments. This paper examines materials and processes for high temperature packaging including liquid transient phase and sintered nanoparticle die attach, high melting point wires for wire bonding and metal and ceramic packages. The limitations of currently available solutions will also be discussed.

  20. Recent progress in OLED and flexible displays and their potential for application to aerospace and military display systems

    NASA Astrophysics Data System (ADS)

    Sarma, Kalluri

    2015-05-01

    Organic light emitting diode (OLED) display technology has advanced significantly in recent years and it is increasingly being adapted in consumer electronics products with premium performance, such as high resolution smart phones, Tablet PCs and TVs. Even flexible OLED displays are beginning to be commercialized in consumer electronic devices such as smart phones and smart watches. In addition to the advances in OLED emitters, successful development and adoption of OLED displays for premium performance applications relies on the advances in several enabling technologies including TFT backplanes, pixel drive electronics, pixel patterning technologies, encapsulation technologies and system level engineering. In this paper we will discuss the impact of the recent advances in LTPS and AOS TFTs, R, G, B and White OLED with color filter pixel architectures, and encapsulation, on the success of the OLEDs in consumer electronic devices. We will then discuss potential of these advances in addressing the requirements of OLED and flexible displays for the military and avionics applications.

  1. 12 CFR 205.6 - Liability of consumer for unauthorized transfers.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... transfers. 205.6 Section 205.6 Banks and Banking FEDERAL RESERVE SYSTEM BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.6 Liability of consumer for unauthorized transfers. (a) Conditions for liability. A consumer may be held liable, within the limitations described in...

  2. 12 CFR 205.6 - Liability of consumer for unauthorized transfers.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... transfers. 205.6 Section 205.6 Banks and Banking FEDERAL RESERVE SYSTEM BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.6 Liability of consumer for unauthorized transfers. (a) Conditions for liability. A consumer may be held liable, within the limitations described in...

  3. 12 CFR 205.2 - Definitions.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... device means a card, code, or other means of access to a consumer's account, or any combination thereof... of the consumer's wages, salary, or other employee compensation (such as commissions), are made on a... agreement. (c) Act means the Electronic Fund Transfer Act (title IX of the Consumer Credit Protection Act...

  4. 17 CFR 160.7 - Form of opt out notice to consumers; opt out methods.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... consumer agrees, electronically. (2) When a customer relationship terminates, the customer's opt out... that relationship. If the individual subsequently establishes a new customer relationship with you, the... relationships. (1) If two or more consumers jointly obtain a financial product or service from you, you may...

  5. Consumer Understanding of Nutrition Marketing Terms: A Pilot Study

    ERIC Educational Resources Information Center

    Haroldson, Amber; Yen, Chih-Lun

    2016-01-01

    The purpose of this pilot study was to examine the validity of a questionnaire developed to assess adult consumer understanding of nutrition marketing terms and the resulting impact on consumer behavior. Participants (n = 40) completed an electronic questionnaire. Efforts to establish validity and reliability suggest that the questionnaire is a…

  6. 12 CFR 205.6 - Liability of consumer for unauthorized transfers.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... transfers. 205.6 Section 205.6 Banks and Banking FEDERAL RESERVE SYSTEM BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.6 Liability of consumer for unauthorized transfers. (a) Conditions for liability. A consumer may be held liable, within the limitations described in...

  7. 12 CFR 205.6 - Liability of consumer for unauthorized transfers.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... transfers. 205.6 Section 205.6 Banks and Banking FEDERAL RESERVE SYSTEM BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.6 Liability of consumer for unauthorized transfers. (a) Conditions for liability. A consumer may be held liable, within the limitations described in...

  8. 12 CFR 205.6 - Liability of consumer for unauthorized transfers.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... transfers. 205.6 Section 205.6 Banks and Banking FEDERAL RESERVE SYSTEM BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.6 Liability of consumer for unauthorized transfers. (a) Conditions for liability. A consumer may be held liable, within the limitations described in...

  9. Fraction of Electrons Consumed in Electron Acceptor Reduction and Hydrogen Thresholds as Indicators of Halorespiratory Physiology

    PubMed Central

    Löffler, Frank E.; Tiedje, James M.; Sanford, Robert A.

    1999-01-01

    Measurements of the hydrogen consumption threshold and the tracking of electrons transferred to the chlorinated electron acceptor (fe) reliably detected chlororespiratory physiology in both mixed cultures and pure cultures capable of using tetrachloroethene, cis-1,2-dichloroethene, vinyl chloride, 2-chlorophenol, 3-chlorobenzoate, 3-chloro-4-hydroxybenzoate, or 1,2-dichloropropane as an electron acceptor. Hydrogen was consumed to significantly lower threshold concentrations of less than 0.4 ppmv compared with the values obtained for the same cultures without a chlorinated compound as an electron acceptor. The fe values ranged from 0.63 to 0.7, values which are in good agreement with theoretical calculations based on the thermodynamics of reductive dechlorination as the terminal electron-accepting process. In contrast, a mixed methanogenic culture that cometabolized 3-chlorophenol exhibited a significantly lower fe value, 0.012. PMID:10473415

  10. 12 CFR 717.25 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing consumers to... single toll-free telephone number. (2) Opt-out methods that are not reasonable and simple. Reasonable and...

  11. 12 CFR 717.25 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing consumers to... single toll-free telephone number. (2) Opt-out methods that are not reasonable and simple. Reasonable and...

  12. 12 CFR 717.25 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing consumers to... single toll-free telephone number. (2) Opt-out methods that are not reasonable and simple. Reasonable and...

  13. 12 CFR 717.25 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing consumers to... single toll-free telephone number. (2) Opt-out methods that are not reasonable and simple. Reasonable and...

  14. 12 CFR 717.25 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing consumers to... single toll-free telephone number. (2) Opt-out methods that are not reasonable and simple. Reasonable and...

  15. Consumers' Perceptions of Patient-Accessible Electronic Medical Records

    PubMed Central

    Vaughon, Wendy L; Czaja, Sara J; Levy, Joslyn; Rockoff, Maxine L

    2013-01-01

    Background Electronic health information (eHealth) tools for patients, including patient-accessible electronic medical records (patient portals), are proliferating in health care delivery systems nationally. However, there has been very limited study of the perceived utility and functionality of portals, as well as limited assessment of these systems by vulnerable (low education level, racial/ethnic minority) consumers. Objective The objective of the study was to identify vulnerable consumers’ response to patient portals, their perceived utility and value, as well as their reactions to specific portal functions. Methods This qualitative study used 4 focus groups with 28 low education level, English-speaking consumers in June and July 2010, in New York City. Results Participants included 10 males and 18 females, ranging in age from 21-63 years; 19 non-Hispanic black, 7 Hispanic, 1 non-Hispanic White and 1 Other. None of the participants had higher than a high school level education, and 13 had less than a high school education. All participants had experience with computers and 26 used the Internet. Major themes were enhanced consumer engagement/patient empowerment, extending the doctor’s visit/enhancing communication with health care providers, literacy and health literacy factors, improved prevention and health maintenance, and privacy and security concerns. Consumers were also asked to comment on a number of key portal features. Consumers were most positive about features that increased convenience, such as making appointments and refilling prescriptions. Consumers raised concerns about a number of potential barriers to usage, such as complex language, complex visual layouts, and poor usability features. Conclusions Most consumers were enthusiastic about patient portals and perceived that they had great utility and value. Study findings suggest that for patient portals to be effective for all consumers, portals must be designed to be easy to read, visually engaging, and have user-friendly navigation. PMID:23978618

  16. Electronic waste recovery in Finland: Consumers' perceptions towards recycling and re-use of mobile phones.

    PubMed

    Ylä-Mella, Jenni; Keiski, Riitta L; Pongrácz, Eva

    2015-11-01

    This paper examines consumers' awareness and perceptions towards mobile phone recycling and re-use. The results are based on a survey conducted in the city of Oulu, Finland, and analysed in the theoretical framework based on the theories of planned behaviour (TPB) and value-belief-norm (VBN). The findings indicate that consumers' awareness of the importance and existence of waste recovery system is high; however, awareness has not translated to recycling behaviour. The survey reveals that 55% of respondents have two or more unused mobile phones at homes. The more phones stored at homes, the more often reasons 'I don't know where to return' and/or 'have not got to do it yet' were mentioned. This indicates that proximity and the convenience of current waste management system are inadequate in promoting the return of small waste electrical and electronic equipment (WEEE). To facilitate re-use, and the highest level of recovery, consumers will need to be committed to return end-of-use electronics to WEEE collection centres without delays. Further, the supply and demand of refurbished mobile phones do not meet at this moment in Finland due to consumer's storing habits versus expectations of recent features under guarantee and unrealistic low prizes. The study also points out that, in order to change current storing habits of consumers, there is an explicit need for more information and awareness on mobile phone collection in Finland, especially on regarding retailers' take-back. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. Microtechnology management considering test and cost aspects for stacked 3D ICs with MEMS

    NASA Astrophysics Data System (ADS)

    Hahn, K.; Wahl, M.; Busch, R.; Grünewald, A.; Brück, R.

    2018-01-01

    Innovative automotive systems require complex semiconductor devices currently only available in consumer grade quality. The European project TRACE will develop and demonstrate methods, processes, and tools to facilitate usage of Consumer Electronics (CE) components to be deployable more rapidly in the life-critical automotive domain. Consumer electronics increasingly use heterogeneous system integration methods and "More than Moore" technologies, which are capable to combine different circuit domains (Analog, Digital, RF, MEMS) and which are integrated within SiP or 3D stacks. Making these technologies or at least some of the process steps available under automotive electronics requirements is an important goal to keep pace with the growing demand for information processing within cars. The approach presented in this paper aims at a technology management and recommendation system that covers technology data, functional and non-functional constraints, and application scenarios, and that will comprehend test planning and cost consideration capabilities.

  18. 12 CFR 41.24 - Reasonable opportunity to opt out.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... electronically to the consumer, such as by posting the notice at an Internet Web site at which the consumer has... a transaction conducted on an Internet Web site. The consumer is required to decide, as a necessary.... (5) By including in a privacy notice. The opt-out notice is included in a Gramm-Leach-Bliley Act...

  19. 12 CFR 571.24 - Reasonable opportunity to opt out.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... electronically to the consumer, such as by posting the notice at an Internet Web site at which the consumer has... a transaction conducted on an Internet Web site. The consumer is required to decide, as a necessary.... (5) By including in a privacy notice. The opt-out notice is included in a Gramm-Leach-Bliley Act...

  20. 12 CFR 717.24 - Reasonable opportunity to opt out.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... electronically to the consumer, such as by posting the notice at an Internet Web site at which the consumer has... a transaction conducted on an Internet Web site. The consumer is required to decide, as a necessary.... (5) By including in a privacy notice. The opt-out notice is included in a Gramm-Leach-Bliley Act...

  1. 77 FR 40459 - Electronic Fund Transfers (Regulation E); Correction

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-10

    ... Electronic Fund Transfers (Regulation E); Correction AGENCY: Bureau of Consumer Financial Protection. ACTION... published the Final Rule (77 FR 6194), which implements the Electronic Fund Transfer Act, and the official... Sec. 1005.3(a) in the interim final rule, Electronic Fund Transfers (Regulation E), published on...

  2. Assessing consumption of bioactive micro-particles by filter-feeding Asian carp

    USGS Publications Warehouse

    Jensen, Nathan R.; Amberg, Jon J.; Luoma, James A.; Walleser, Liza R.; Gaikowski, Mark P.

    2012-01-01

    Silver carp Hypophthalmichthys molitrix (SVC) and bighead carp H. nobilis (BHC) have impacted waters in the US since their escape. Current chemical controls for aquatic nuisance species are non-selective. Development of a bioactive micro-particle that exploits filter-feeding habits of SVC or BHC could result in a new control tool. It is not fully understood if SVC or BHC will consume bioactive micro-particles. Two discrete trials were performed to: 1) evaluate if SVC and BHC consume the candidate micro-particle formulation; 2) determine what size they consume; 3) establish methods to evaluate consumption of filter-feeders for future experiments. Both SVC and BHC were exposed to small (50-100 μm) and large (150-200 μm) micro-particles in two 24-h trials. Particles in water were counted electronically and manually (microscopy). Particles on gill rakers were counted manually and intestinal tracts inspected for the presence of micro-particles. In Trial 1, both manual and electronic count data confirmed reductions of both size particles; SVC appeared to remove more small particles than large; more BHC consumed particles; SVC had fewer overall particles in their gill rakers than BHC. In Trial 2, electronic counts confirmed reductions of both size particles; both SVC and BHC consumed particles, yet more SVC consumed micro-particles compared to BHC. Of the fish that ate micro-particles, SVC consumed more than BHC. It is recommended to use multiple metrics to assess consumption of candidate micro-particles by filter-feeders when attempting to distinguish differential particle consumption. This study has implications for developing micro-particles for species-specific delivery of bioactive controls to help fisheries, provides some methods for further experiments with bioactive micro-particles, and may also have applications in aquaculture.

  3. 12 CFR 609.950 - Electronic communications.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... with E-SIGN, System institutions may communicate electronically in business, consumer, or commercial transactions. E-commerce transactions require the agreement of all parties when you do business. (b....950 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM ELECTRONIC COMMERCE General...

  4. 12 CFR 609.950 - Electronic communications.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... with E-SIGN, System institutions may communicate electronically in business, consumer, or commercial transactions. E-commerce transactions require the agreement of all parties when you do business. (b....950 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM ELECTRONIC COMMERCE General...

  5. 12 CFR 609.950 - Electronic communications.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... with E-SIGN, System institutions may communicate electronically in business, consumer, or commercial transactions. E-commerce transactions require the agreement of all parties when you do business. (b....950 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM ELECTRONIC COMMERCE General...

  6. 12 CFR 609.950 - Electronic communications.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... with E-SIGN, System institutions may communicate electronically in business, consumer, or commercial transactions. E-commerce transactions require the agreement of all parties when you do business. (b....950 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM ELECTRONIC COMMERCE General...

  7. 12 CFR 609.950 - Electronic communications.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... with E-SIGN, System institutions may communicate electronically in business, consumer, or commercial transactions. E-commerce transactions require the agreement of all parties when you do business. (b....950 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM ELECTRONIC COMMERCE General...

  8. Gunshot identification system by integration of open source consumer electronics

    NASA Astrophysics Data System (ADS)

    López R., Juan Manuel; Marulanda B., Jose Ignacio

    2014-05-01

    This work presents a prototype of low-cost gunshots identification system that uses consumer electronics in order to ensure the existence of gunshots and then classify it according to a previously established database. The implementation of this tool in the urban areas is to set records that support the forensics, hence improving law enforcement also on developing countries. An analysis of its effectiveness is presented in comparison with theoretical results obtained with numerical simulations.

  9. National Skills Standards Development Program: Organization and Operation of Technical Committees To Develop National Skill Standards for Competency in the Electronics Industry. The Third Party Summative Evaluation of the Electronic Industries Foundation Project. Phase I & II. Final Report.

    ERIC Educational Resources Information Center

    Losh, Charles

    The Electronics Industries Foundation was awarded a project to develop national entry-level standards and a certification system. Ten specialties were included: automotive electronics, avionics, biomedical electronics, business machines, consumer products electronics, general electronics, industrial electronics, instrumentation, microcomputer, and…

  10. Electricity-driven metabolic shift through direct electron uptake by electroactive heterotroph Clostridium pasteurianum

    PubMed Central

    Choi, Okkyoung; Kim, Taeyeon; Woo, Han Min; Um, Youngsoon

    2014-01-01

    Although microbes directly accepting electrons from a cathode have been applied for CO2 reduction to produce multicarbon-compounds, a high electron demand and low product concentration are critical limitations. Alternatively, the utilization of electrons as a co-reducing power during fermentation has been attempted, but there must be exogenous mediators due to the lack of an electroactive heterotroph. Here, we show that Clostridium pasteurianum DSM 525 simultaneously utilizes both cathode and substrate as electron donors through direct electron transfer. In a cathode compartment poised at +0.045 V vs. SHE, a metabolic shift in C. pasteurianum occurs toward NADH-consuming metabolite production such as butanol from glucose (20% shift in terms of NADH consumption) and 1,3-propandiol from glycerol (21% shift in terms of NADH consumption). Notably, a small amount of electron uptake significantly induces NADH-consuming pathways over the stoichiometric contribution of the electrons as reducing equivalents. Our results demonstrate a previously unknown electroactivity and metabolic shift in the biochemical-producing heterotroph, opening up the possibility of efficient and enhanced production of electron-dense metabolites using electricity. PMID:25376371

  11. Production and Consumption of Hydrogen in Hot Spring Microbial Mats Dominated by a Filamentous Anoxygenic Photosynthetic Bacterium

    PubMed Central

    Otaki, Hiroyo; Everroad, R. Craig; Matsuura, Katsumi; Haruta, Shin

    2012-01-01

    Microbial mats containing the filamentous anoxygenic photosynthetic bacterium Chloroflexus aggregans develop at Nakabusa hot spring in Japan. Under anaerobic conditions in these mats, interspecies interaction between sulfate-reducing bacteria as sulfide producers and C. aggregans as a sulfide consumer has been proposed to constitute a sulfur cycle; however, the electron donor utilized for microbial sulfide production at Nakabusa remains to be identified. In order to determine this electron donor and its source, ex situ experimental incubation of mats was explored. In the presence of molybdate, which inhibits biological sulfate reduction, hydrogen gas was released from mat samples, indicating that this hydrogen is normally consumed as an electron donor by sulfate-reducing bacteria. Hydrogen production decreased under illumination, indicating that C. aggregans also functions as a hydrogen consumer. Small amounts of hydrogen may have also been consumed for sulfur reduction. Clone library analysis of 16S rRNA genes amplified from the mats indicated the existence of several species of hydrogen-producing fermentative bacteria. Among them, the most dominant fermenter, Fervidobacterium sp., was successfully isolated. This isolate produced hydrogen through the fermentation of organic carbon. Dispersion of microbial cells in the mats resulted in hydrogen production without the addition of molybdate, suggesting that simultaneous production and consumption of hydrogen in the mats requires dense packing of cells. We propose a cyclic electron flow within the microbial mats, i.e., electron flow occurs through three elements: S (elemental sulfur, sulfide, sulfate), C (carbon dioxide, organic carbon) and H (di-hydrogen, protons). PMID:22446313

  12. Climate change (elevated CO₂, elevated temperature and moderate drought) triggers the antioxidant enzymes' response of grapevine cv. Tempranillo, avoiding oxidative damage.

    PubMed

    Salazar-Parra, Carolina; Aguirreolea, Jone; Sánchez-Díaz, Manuel; Irigoyen, Juan José; Morales, Fermín

    2012-02-01

    Photosynthetic carbon fixation (A(N) ) and photosynthetic electron transport rate (ETR) are affected by different environmental stress factors, such as those associated with climate change. Under stress conditions, it can be generated an electron excess that cannot be consumed, which can react with O₂, producing reactive oxygen species. This work was aimed to evaluate the influence of climate change (elevated CO₂, elevated temperature and moderate drought) on the antioxidant status of grapevine (Vitis vinifera) cv. Tempranillo leaves, from veraison to ripeness. The lowest ratios between electrons generated (ETR) and consumed (A(N) + respiration + photorespiration) were observed in plants treated with elevated CO₂ and elevated temperature. In partially irrigated plants under current ambient conditions, electrons not consumed seemed to be diverted to alternative ways. Oxidative damage to chlorophylls and carotenoids was not observed. However, these plants had increases in thiobarbituric acid reacting substances, an indication of lipid peroxidation. These increases matched well with an early rise of H₂O₂ and antioxidant enzyme activities, superoxide dismutase (EC 1.15.1.1), ascorbate peroxidase (EC 1.11.1.11) and catalase (EC 1.11.1.6). Enzymatic activities were maintained high until ripeness. In conclusion, plants grown under current ambient conditions and moderate drought were less efficient to cope with oxidative damage than well-irrigated plants, and more interestingly, plants grown under moderate drought but treated with elevated CO₂ and elevated temperature were not affected by oxidative damage, mainly because of higher rates of electrons consumed in photosynthetic carbon fixation. Copyright © Physiologia Plantarum 2011.

  13. Sweetener blend optimization by using mixture design methodology and the electronic tongue.

    PubMed

    Waldrop, Megan E; Ross, Carolyn F

    2014-09-01

    Utilizing more than one sweetener has been shown to be an effective way to substitute sucrose in food products. The objective of this study was to apply the augmented simplex-centroid mixture design for the optimization of acceptable sweetener blends using coconut sugar, agave, and stevia. Sweetener blends were evaluated in aqueous solutions and gluten-free granola bars by a trained panel and consumers (n = 60). Significant differences were found between sweetener mixtures in solutions by both panelists and consumers (P < 0.05). Taste profiles for the sweetener solutions were also generated using the electronic tongue. Most consumer and trained intensity ratings were highly correlated (R(2) ≥ 0.79) with the electronic tongue taste profile analysis. Granola bars were also found to be significantly different (P < 0.05), with consumers preferring coconut sugar mixtures. Using contour plots and desirability function analysis, an optimal sweetener combination was found for a granola bar formulation of 89.9% coconut sugar, 6.1% agave, and 4% stevia. These results indicate that a mixture design can be a reliable way to develop new sweetener blends for product development. © 2014 Institute of Food Technologists®

  14. Consumers' Use of Personal Electronic Devices in the Kitchen.

    PubMed

    Lando, Amy M; Bazaco, Michael C; Chen, Yi

    2018-02-23

    Smartphones, tablets, and other personal electronic devices have become ubiquitous in Americans' daily lives. These devices are used by people throughout the day, including while preparing food. For example, a device may be used to look at recipes and therefore be touched multiple times during food preparation. Previous research has indicated that cell phones can harbor bacteria, including opportunistic human pathogens such as Staphylococcus and Klebsiella spp. This investigation was conducted with data from the 2016 Food Safety Survey (FSS) and from subsequent focus groups to determine the frequency with which consumers use personal electronic devices in the kitchen while preparing food, the types of devices used, and hand washing behaviors after handling these devices. The 2016 FSS is the seventh wave of a repeated cross-sectional survey conducted by the U.S. Food and Drug Administration in collaboration with the U.S. Department of Agriculture. The goal of the FSS is to evaluate U.S. adult consumer attitudes, behaviors, and knowledge about food safety. The FSS included 4,169 adults that were contacted using a dual-frame (land line and cell phone interviews) random-digit-dial sampling process. The personal electronics module was the first of three food safety topics discussed by each of eight consumer focus groups, which were convened in four U.S. cities in fall 2016. Results from the 2016 FSS revealed that of those individuals who use personal electronic devices while cooking, only about one third reported washing hands after touching the device and before continuing cooking. This proportion is significantly lower than that for self-reported hand washing behaviors after touching risky food products such as raw eggs, meat, chicken, or fish. Results from the focus groups highlight the varied usage of these devices during food preparation and the related strategies consumers are using to incorporate personal electric devices into their cooking routines.

  15. Health Data Sharing Preferences of Consumers: Public Policy and Legal Implications of Consumer-Mediated Data Management

    ERIC Educational Resources Information Center

    Moon, Lisa A.

    2017-01-01

    An individual's choice to share or have control of the sharing or withholding of their personal health information is one of the most significant public policy challenges associated with electronic information exchange. There were four aims of this study. First, to describe predictors of health data sharing preferences of consumers. Second, to…

  16. Decomposed multidimensional control grid interpolation for common consumer electronic image processing applications

    NASA Astrophysics Data System (ADS)

    Zwart, Christine M.; Venkatesan, Ragav; Frakes, David H.

    2012-10-01

    Interpolation is an essential and broadly employed function of signal processing. Accordingly, considerable development has focused on advancing interpolation algorithms toward optimal accuracy. Such development has motivated a clear shift in the state-of-the art from classical interpolation to more intelligent and resourceful approaches, registration-based interpolation for example. As a natural result, many of the most accurate current algorithms are highly complex, specific, and computationally demanding. However, the diverse hardware destinations for interpolation algorithms present unique constraints that often preclude use of the most accurate available options. For example, while computationally demanding interpolators may be suitable for highly equipped image processing platforms (e.g., computer workstations and clusters), only more efficient interpolators may be practical for less well equipped platforms (e.g., smartphones and tablet computers). The latter examples of consumer electronics present a design tradeoff in this regard: high accuracy interpolation benefits the consumer experience but computing capabilities are limited. It follows that interpolators with favorable combinations of accuracy and efficiency are of great practical value to the consumer electronics industry. We address multidimensional interpolation-based image processing problems that are common to consumer electronic devices through a decomposition approach. The multidimensional problems are first broken down into multiple, independent, one-dimensional (1-D) interpolation steps that are then executed with a newly modified registration-based one-dimensional control grid interpolator. The proposed approach, decomposed multidimensional control grid interpolation (DMCGI), combines the accuracy of registration-based interpolation with the simplicity, flexibility, and computational efficiency of a 1-D interpolation framework. Results demonstrate that DMCGI provides improved interpolation accuracy (and other benefits) in image resizing, color sample demosaicing, and video deinterlacing applications, at a computational cost that is manageable or reduced in comparison to popular alternatives.

  17. 12 CFR 343.20 - Definitions.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND STATEMENTS OF GENERAL POLICY CONSUMER...)(10)). (d) Consumer means an individual who purchases, applies to purchase, or is solicited to... attempt to control the behavior of another person. (g) Electronic media includes any means for...

  18. 77 FR 18795 - Proposed Collection; Comment Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-28

    ... collected through qualitative evaluation methods will increase the Bureau's understanding of consumers... following methods: Electronic: http://www.regulations.gov . Follow the instructions for submitting comments... directs the Bureau to research, analyze, and report on consumer awareness and understanding of, and...

  19. A qualitative study of Australians' opinions about personally controlled electronic health records.

    PubMed

    Lehnbom, Elin C; McLachlan, Andrew; Brien, Jo-Anne E

    2012-01-01

    A personally controlled electronic health record (PCEHR) system is being implemented in Australia. Every Australian that wants a PCEHR will be able to opt-in from July 2012. To explore the opinions of Australian consumers and healthcare providers about the PCEHR. In this qualitative study, consumers and healthcare providers were interviewed using a semi-structured interview guide. Perceived benefits identified by participants regarding the PCEHR included instant access to clinical information, and safer and more efficient healthcare delivery. The risk of unauthorised access and breaches of privacy were some of the perceived drawbacks. Although consumers seemed unwilling to opt-in to have a PCEHR, the vast majority of healthcare providers were positive towards this development and predicted better and safer healthcare as a result. Consumers and healthcare providers appeared uniformed about the imminent PCEHR. The wide-spread unwillingness among participants to opt-in to have a PCEHR could potentially jeopardise successful implementation and uptake of this system. A well-designed system without security glitches and with individualised information from trusted healthcare providers regarding the benefits of having a PCEHR appears critical in engaging consumer opt-in.

  20. Sensors As Tools for Quantitation, Nanotoxicity and Nanomonitoring Assessment of Engineered Nanomaterials

    EPA Science Inventory

    The discovery of fullerenes in 1985 has ushered in an explosive growth in the applications of engineered nanomaterials and consumer products. Nanotechnology and engineered nanomaterials (ENMs) are being incorporated into a range of commercial products such as consumer electronic...

  1. 12 CFR 536.20 - Definitions.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY CONSUMER PROTECTION IN SALES OF INSURANCE...)(10)). Consumer means an individual who purchases, applies to purchase, or is solicited to purchase... attempt to control the behavior of another person. Electronic media includes any means for transmitting...

  2. Consumers' views on generic medicines: a review of the literature.

    PubMed

    Hassali, Mohamed A A; Shafie, Asrul A; Jamshed, Shazia; Ibrahim, Mohamed I M; Awaisu, Ahmed

    2009-04-01

    To review the literature on consumers' knowledge, attitudes and opinions of the use of generic medicines. A narrative review of studies conducted from 1970 to 2008 on consumers perceptions and views towards generic medicines was performed. An extensive literature search was undertaken using indexing services available at the authors' institution library. The following keywords were used for the search: brand, generic, multisource, medications, medicines, drugs, pharmaceuticals and consumers, customers, and patients. Electronic databases searched were Medline, Inside Web, ISI Web of Knowledge, Science Direct, Springer Link, JSTOR, Proquest, Ebsco Host and Google Scholar. These electronic databases were searched for full text papers published in English from 1970 to October 2008. Twenty studies were identified. Eleven were from the USA, four were from Europe, two were from Canada and one each was from Australia, Brazil and Malaysia. In general, consumers showed mixed reactions towards the use of generic medicines. This was evident from the divergence of views observed by country development level, consumers' socioeconomic characteristics, drug product characteristics, pharmaceutical reimbursement system, policy environment, contact with health care professionals, past experience with medications, and knowledge of the seriousness of a medical condition. Patient confidence and knowledge pertaining to generic medicines use have increased over the past four decades, especially in developed countries. Mass educational efforts, financial incentives, and greater communication among patients and health care professionals were seen as major drivers to the uptake of generic medicines among consumers.

  3. Promotion of prescription drugs to consumers.

    PubMed

    Rosenthal, Meredith B; Berndt, Ernst R; Donohue, Julie M; Frank, Richard G; Epstein, Arnold M

    2002-02-14

    Spending on prescription drugs is the fastest growing component of the health care budget. There is public concern about the possibility that direct-to-consumer advertising of prescription drugs will result in inappropriate prescribing and higher costs of care. Guidelines issued in 1997 by the Food and Drug Administration (FDA) regarding advertising to consumers through electronic media are considered by some to be responsible for unleashing a flood of direct-to-consumer advertising. Using data on spending for promotional purposes and sales of prescription drugs, we examined industrywide trends for various types of promotion. We also tracked the relation between promotional efforts and sales over time. Finally, we documented the variation in direct-to-consumer advertising among and within five therapeutic classes of drugs and compared the variation in the intensity of such advertising with variation in the intensity of promotion to health care professionals. Annual spending on direct-to-consumer advertising for prescription drugs tripled between 1996 and 2000, when it reached nearly $2.5 billion. Despite this increase, such advertising accounts for only 15 percent of the money spent on drug promotion and is highly concentrated on a subgroup of products. Within a therapeutic class, there is marked variation in the intensity of direct-to-consumer advertising, and the amount of such advertising for specific products fluctuates over time. The initial surge in direct-to-consumer advertising preceded the 1997 FDA guidelines that clarified the rules for electronic direct-to-consumer advertising, and thus the 1997 guidelines may not have been the most important reason for the overall increase. Although the use of direct-to-consumer advertising has grown disproportionately to other forms of promotion, it continues to account for a small proportion of total promotional efforts. Nevertheless, physicians must assist patients in evaluating health-related information obtained through direct advertising.

  4. Wide Bandgap Technology Enhances Performance of Electric-Drive Vehicles |

    Science.gov Websites

    , WBG materials/devices enable lighter, more compact, and more efficient power electronics for vehicles, and increased electric vehicle adoption by consumers. Wide bandgap power electronics devices power electronics component size and potentially reduce system or component-level cost, while improving

  5. 40 CFR 272.951 - Louisiana state-administered program: Final authorization.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... changes conforming to the addition of Consumer Electronics as a state universal waste. These changes were... Electronics as part of the State's approved program. (iii) The following authorized provisions of the...

  6. 40 CFR 272.951 - Louisiana state-administered program: Final authorization.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... changes conforming to the addition of Consumer Electronics as a state universal waste. These changes were... Electronics as part of the State's approved program. (iii) The following authorized provisions of the...

  7. Factors affecting willingness to share electronic health data among California consumers.

    PubMed

    Kim, Katherine K; Sankar, Pamela; Wilson, Machelle D; Haynes, Sarah C

    2017-04-04

    Robust technology infrastructure is needed to enable learning health care systems to improve quality, access, and cost. Such infrastructure relies on the trust and confidence of individuals to share their health data for healthcare and research. Few studies have addressed consumers' views on electronic data sharing and fewer still have explored the dual purposes of healthcare and research together. The objective of the study is to explore factors that affect consumers' willingness to share electronic health information for healthcare and research. This study involved a random-digit dial telephone survey of 800 adult Californians conducted in English and Spanish. Logistic regression was performed using backward selection to test for significant (p-value ≤ 0.05) associations of each explanatory variable with the outcome variable. The odds of consent for electronic data sharing for healthcare decreased as Likert scale ratings for EHR impact on privacy worsened, odds ratio (OR) = 0.74, 95% CI [0.60, 0.90]; security, OR = 0.80, 95% CI [0.66, 0.98]; and quality, OR = 0.59, 95% CI [0.46-0.75]. The odds of consent for sharing for research was greater for those who think EHR will improve research quality, OR = 11.26, 95% CI [4.13, 30.73]; those who value research benefit over privacy OR = 2.72, 95% CI [1.55, 4.78]; and those who value control over research benefit OR = 0.49, 95% CI [0.26, 0.94]. Consumers' choices about electronically sharing health information are affected by their attitudes toward EHRs as well as beliefs about research benefit and individual control. Design of person-centered interventions utilizing electronically collected health information, and policies regarding data sharing should address these values of importance to people. Understanding of these perspectives is critical for leveraging health data to support learning health care systems.

  8. Automated integration of continuous glucose monitor data in the electronic health record using consumer technology

    PubMed Central

    Kumar, Rajiv B; Goren, Nira D; Stark, David E; Wall, Dennis P; Longhurst, Christopher A

    2016-01-01

    The diabetes healthcare provider plays a key role in interpreting blood glucose trends, but few institutions have successfully integrated patient home glucose data in the electronic health record (EHR). Published implementations to date have required custom interfaces, which limit wide-scale replication. We piloted automated integration of continuous glucose monitor data in the EHR using widely available consumer technology for 10 pediatric patients with insulin-dependent diabetes. Establishment of a passive data communication bridge via a patient’s/parent’s smartphone enabled automated integration and analytics of patient device data within the EHR between scheduled clinic visits. It is feasible to utilize available consumer technology to assess and triage home diabetes device data within the EHR, and to engage patients/parents and improve healthcare provider workflow. PMID:27018263

  9. 16 CFR 1110.5 - Acceptable certificates.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Acceptable certificates. 1110.5 Section 1110.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CERTIFICATES OF COMPLIANCE § 1110.5 Acceptable certificates. A certificate that is in hard copy or electronic...

  10. 16 CFR 1110.5 - Acceptable certificates.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Acceptable certificates. 1110.5 Section 1110.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CERTIFICATES OF COMPLIANCE § 1110.5 Acceptable certificates. A certificate that is in hard copy or electronic...

  11. 16 CFR 1110.5 - Acceptable certificates.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Acceptable certificates. 1110.5 Section 1110.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CERTIFICATES OF COMPLIANCE § 1110.5 Acceptable certificates. A certificate that is in hard copy or electronic...

  12. 16 CFR 1110.5 - Acceptable certificates.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Acceptable certificates. 1110.5 Section 1110.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CERTIFICATES OF COMPLIANCE § 1110.5 Acceptable certificates. A certificate that is in hard copy or electronic...

  13. 47 CFR 301.6 - Retailer participation.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... responsible for checking consumer or household eligibility but shall report to NTIA suspicious patterns of customer behavior. (4) Use commercially reasonable methods to order and manage inventory to meet customer... requires the retailers to self certify that they: (A) Have been engaged in the consumer electronics retail...

  14. 78 FR 4418 - Electronic Submission Process for Requesting Export Certificates From the Center for Devices and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-22

    ... (CDRH). The electronic process will help fulfill both the legislative and application time processing... Devices and Radiological Health (CDRH), Division of Small Manufacturers, International and Consumer... regulated by CDRH as a voluntary alternative to paper submissions. With electronic submissions, CDRH can...

  15. Agent-Based Framework for Personalized Service Provisioning in Converged IP Networks

    NASA Astrophysics Data System (ADS)

    Podobnik, Vedran; Matijasevic, Maja; Lovrek, Ignac; Skorin-Kapov, Lea; Desic, Sasa

    In a global multi-service and multi-provider market, the Internet Service Providers will increasingly need to differentiate in the service quality they offer and base their operation on new, consumer-centric business models. In this paper, we propose an agent-based framework for the Business-to-Consumer (B2C) electronic market, comprising the Consumer Agents, Broker Agents and Content Agents, which enable Internet consumers to select a content provider in an automated manner. We also discuss how to dynamically allocate network resources to provide end-to-end Quality of Service (QoS) for a given consumer and content provider.

  16. 75 FR 27264 - Video Device Competition; Implementation of Section 304 of the Telecommunications Act of 1996...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-14

    ... and Consumer Electronics Equipment AGENCY: Federal Communications Commission. ACTION: Notice of... explore the potential for allowing any electronics manufacturer to offer smart video devices at retail...

  17. 77 FR 28604 - Agency Information Collection Activities; Proposed Collection; Comment Request; Guidance for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-15

    ... Approved Application as Required by the Dietary Supplement and Nonprescription Drug Consumer Protection Act... Dietary Supplement and Nonprescription Drug Consumer Protection Act.'' DATES: Submit either electronic or... Nonprescription Human Drug Products Marketed Without an Approved Application as Required by the Dietary Supplement...

  18. 77 FR 77187 - Electronic Fund Transfers (Regulation E)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-31

    ... section 1073 of the Dodd-Frank Wall Street Reform and Consumer Protection Act regarding remittance.... SUPPLEMENTARY INFORMATION: I. Overview Section 1073 of the Dodd-Frank Wall Street Reform and Consumer Protection... providers, section 1073 creates a new EFTA section 919, and generally requires: (i) The provision of...

  19. 12 CFR 208.82 - Definitions for purposes of this subpart.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... SYSTEM MEMBERSHIP OF STATE BANKING INSTITUTIONS IN THE FEDERAL RESERVE SYSTEM (REGULATION H) Consumer...)(10)). (d) Consumer means an individual who purchases, applies to purchase, or is solicited to... attempt to control the behavior of another person. (g) Electronic media includes any means for...

  20. Consumer Sleep Technologies: A Review of the Landscape.

    PubMed

    Ko, Ping-Ru T; Kientz, Julie A; Choe, Eun Kyoung; Kay, Matthew; Landis, Carol A; Watson, Nathaniel F

    2015-12-15

    To review sleep related consumer technologies, including mobile electronic device "apps," wearable devices, and other technologies. Validation and methodological transparency, the effect on clinical sleep medicine, and various social, legal, and ethical issues are discussed. We reviewed publications from the digital libraries of the Association for Computing Machinery, Institute of Electrical and Electronics Engineers, and PubMed; publications from consumer technology websites; and mobile device app marketplaces. Search terms included "sleep technology," "sleep app," and "sleep monitoring." Consumer sleep technologies are categorized by delivery platform including mobile device apps (integrated with a mobile operating system and utilizing mobile device functions such as the camera or microphone), wearable devices (on the body or attached to clothing), embedded devices (integrated into furniture or other fixtures in the native sleep environment), accessory appliances, and conventional desktop/website resources. Their primary goals include facilitation of sleep induction or wakening, self-guided sleep assessment, entertainment, social connection, information sharing, and sleep education. Consumer sleep technologies are changing the landscape of sleep health and clinical sleep medicine. These technologies have the potential to both improve and impair collective and individual sleep health depending on method of implementation. © 2015 American Academy of Sleep Medicine.

  1. Soldering Technology and Product Assurance (7th) Proceedings of Annual Seminar Held in China Lake, California on 23, 24, 25 February 1983.

    DTIC Science & Technology

    1983-02-01

    product. For commercial . - iJ% .--.-. - • .. - .. .. - - -- . .-. . . . . : . : : , ’. , .- ,. . j-,,_. . , ,_= . -42- electronics used in consumer ...and is variable according to the environment of the end use. For consumer products used indoors or in benign environments, the cost should not be...assaults have been leveled against consumer products industries and the steel industry, mainly from foreign competitors, the defense and aerospace

  2. Biocompatible and totally disintegrable semiconducting polymer for ultrathin and ultralightweight transient electronics

    PubMed Central

    Lei, Ting; Guan, Ming; Liu, Jia; Lin, Hung-Cheng; Pfattner, Raphael; McGuire, Allister F.; Huang, Tsung-Ching; Shao, Leilai; Cheng, Kwang-Ting; Tok, Jeffrey B.-H.; Bao, Zhenan

    2017-01-01

    Increasing performance demands and shorter use lifetimes of consumer electronics have resulted in the rapid growth of electronic waste. Currently, consumer electronics are typically made with nondecomposable, nonbiocompatible, and sometimes even toxic materials, leading to serious ecological challenges worldwide. Here, we report an example of totally disintegrable and biocompatible semiconducting polymers for thin-film transistors. The polymer consists of reversible imine bonds and building blocks that can be easily decomposed under mild acidic conditions. In addition, an ultrathin (800-nm) biodegradable cellulose substrate with high chemical and thermal stability is developed. Coupled with iron electrodes, we have successfully fabricated fully disintegrable and biocompatible polymer transistors. Furthermore, disintegrable and biocompatible pseudo-complementary metal–oxide–semiconductor (CMOS) flexible circuits are demonstrated. These flexible circuits are ultrathin (<1 μm) and ultralightweight (∼2 g/m2) with low operating voltage (4 V), yielding potential applications of these disintegrable semiconducting polymers in low-cost, biocompatible, and ultralightweight transient electronics. PMID:28461459

  3. Biocompatible and totally disintegrable semiconducting polymer for ultrathin and ultralightweight transient electronics.

    PubMed

    Lei, Ting; Guan, Ming; Liu, Jia; Lin, Hung-Cheng; Pfattner, Raphael; Shaw, Leo; McGuire, Allister F; Huang, Tsung-Ching; Shao, Leilai; Cheng, Kwang-Ting; Tok, Jeffrey B-H; Bao, Zhenan

    2017-05-16

    Increasing performance demands and shorter use lifetimes of consumer electronics have resulted in the rapid growth of electronic waste. Currently, consumer electronics are typically made with nondecomposable, nonbiocompatible, and sometimes even toxic materials, leading to serious ecological challenges worldwide. Here, we report an example of totally disintegrable and biocompatible semiconducting polymers for thin-film transistors. The polymer consists of reversible imine bonds and building blocks that can be easily decomposed under mild acidic conditions. In addition, an ultrathin (800-nm) biodegradable cellulose substrate with high chemical and thermal stability is developed. Coupled with iron electrodes, we have successfully fabricated fully disintegrable and biocompatible polymer transistors. Furthermore, disintegrable and biocompatible pseudo-complementary metal-oxide-semiconductor (CMOS) flexible circuits are demonstrated. These flexible circuits are ultrathin (<1 μm) and ultralightweight (∼2 g/m 2 ) with low operating voltage (4 V), yielding potential applications of these disintegrable semiconducting polymers in low-cost, biocompatible, and ultralightweight transient electronics.

  4. 76 FR 59394 - Energy Conservation Program for Consumer Products: Publication of the Extension of Interim Waiver...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-26

    ... Electronics America, Inc. From the Department of Energy Residential Refrigerator and Refrigerator-Freezer Test... Electronics America, Inc. (Samsung) from energy efficiency test procedure requirements that are applicable to...

  5. Telecommunicating in Tomorrow's World.

    ERIC Educational Resources Information Center

    Harkins, Judy

    1983-01-01

    Examples of new electronic devices used by deaf persons include electronic mail capabilities, teleprompters that can caption television live, and speech synthesis equipment. Consumers can establish and use assistive device centers to become familiar with the latest in technology. (CL)

  6. Net Neutrality: The Great Debate

    ERIC Educational Resources Information Center

    Connolly, Mary

    2015-01-01

    FCC Chairman Tom Wheeler, speaking at the International Consumer Electronics Show in January, called for an open Internet which would make sure that ISPs had economic incentives to build better networks while still protecting consumers and innovators. His specific recommendations were shared with the other members of the FCC in February. One of…

  7. Distance Education: A Consumer's Guide. What Distance Learners Need To Know.

    ERIC Educational Resources Information Center

    Western Interstate Commission for Higher Education, Boulder, CO. Western Cooperative for Educational Communications.

    This pamphlet is intended to assist the consumer in making informed decisions when choosing between distance learning programs. Distance education and distance learners are defined. Included is advice on beginning a program search; choosing a school; accreditation; evaluating quality of electronically offered programs; evaluate non-accredited…

  8. Resources for Family and Consumer Science Teachers, 1995.

    ERIC Educational Resources Information Center

    Scholl, Jan

    This annotated bibliography of resources for family and consumer science teachers lists 59 items developed for "Teacher Pages" (an electronic information service) by Penn State Cooperative Extension Service between December 1, 1993 and December 1, 1994. Each listing includes a short description, source, address, price if appropriate, and ordering…

  9. 78 FR 76297 - Social Media: Consumer Compliance Risk Management Guidance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-17

    ... controls should apply to all customers, products and services, including customers engaging in electronic banking (e-banking) through the use of social media, and e- banking products and services offered in the...., Washington DC 20219, (202) 649-7181. Board: Lanette Meister, Senior Supervisory Consumer Financial Services...

  10. 16 CFR § 1110.5 - Acceptable certificates.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Acceptable certificates. § 1110.5 Section § 1110.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CERTIFICATES OF COMPLIANCE § 1110.5 Acceptable certificates. A certificate that is in hard copy or electronic...

  11. 77 FR 57566 - Announcement of Public Meeting on the Consumer Confidence Report (CCR) Rule Retrospective Review...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-18

    ... ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OW-2012-0035; FRL-9730-7] Announcement of Public Meeting on the Consumer Confidence Report (CCR) Rule Retrospective Review and Request for Public Comment on Potential Approaches to Electronic Delivery of the CCR; Correction AGENCY: Environmental Protection Agency...

  12. Consumers Are Ready to Accept the Transition to Online and Electronic Records If They Can Be Assured of the Security Measures

    PubMed Central

    Chhanabhai, Prajesh; Holt, Alec

    2007-01-01

    Background Healthcare has entered the electronic domain. This domain has improved data collection and storage abilities while allowing almost instantaneous access and results to data queries. Furthermore, it allows direct communication between healthcare providers and health consumers. The development of privacy, confidentiality, and security principles are necessary to protect consumers' interests against inappropriate access. Studies have shown that the health consumer is the important stakeholder in this process. With the international push toward electronic health records (EHRs), this article presents the importance of secure EHR systems from the public's perspective. Objective To examine the public's perception of the security of electronic systems and report on how their perceptions can shape the building of stronger systems. Methods A cross-sectional survey (September-November 2005) of people attending healthcare providers (n = 400) was conducted in the 4 major cities in New Zealand. Participants were surveyed on computer use, knowledge of EHR-proposed benefits and issues, security issues, and demographics. Results A total of 300 surveys were completed and returned (a 75% response rate), with 180 (60%) being women. One hundred eighty-eight (62.6%) had not heard of EHRs, with those who had heard of them indicating that they were a positive innovation in the health sector. However, 202 (73.3%) participants were highly concerned about the security and privacy of their health records. This feeling was further accentuated when participants were asked about security of electronic systems. Participants were worried about hackers (79.4%), vendor access (72.7%), and malicious software (68%). Participants were also introduced to various security systems, and in each case, over 80% of participants believed that these would make EHR systems more secure. A number of chi-square tests were carried out with each variable, and it was found that there were strong relationships between age, location, computer use, EHR knowledge, and the concern for privacy and the security of medical records (P < .05). The survey also showed that there was a very small difference (9.8%) between health consumers who believed that paper records are more secure than EHRs and those who believed otherwise. Conclusions The findings showed that for the EHR to be fully integrating in the health sector, there are 2 main issues that need to be addressed: The security of the EHR system has to be of the highest level, and needs to be constantly monitored and updated.The involvement of the health consumer in the ownership and maintenance of their health record needs to be more proactive. The EHR aims to collect information to allow for “cradle to the grave” treatment; thus, the health consumer has to be seen as a major player in ensuring that this can happen correctly. The results from this study indicated that the consumer is ready to accept the transition, as long as one can be assured of the security of the system. PMID:17435617

  13. Consumers are ready to accept the transition to online and electronic records if they can be assured of the security measures.

    PubMed

    Chhanabhai, Prajesh; Holt, Alec

    2007-01-11

    Healthcare has entered the electronic domain. This domain has improved data collection and storage abilities while allowing almost instantaneous access and results to data queries. Furthermore, it allows direct communication between healthcare providers and health consumers. The development of privacy, confidentiality, and security principles are necessary to protect consumers' interests against inappropriate access. Studies have shown that the health consumer is the important stakeholder in this process. With the international push toward electronic health records (EHRs), this article presents the importance of secure EHR systems from the public's perspective. To examine the public's perception of the security of electronic systems and report on how their perceptions can shape the building of stronger systems. A cross-sectional survey (September-November 2005) of people attending healthcare providers (n = 400) was conducted in the 4 major cities in New Zealand. Participants were surveyed on computer use, knowledge of EHR-proposed benefits and issues, security issues, and demographics. A total of 300 surveys were completed and returned (a 75% response rate), with 180 (60%) being women. One hundred eighty-eight (62.6%) had not heard of EHRs, with those who had heard of them indicating that they were a positive innovation in the health sector. However, 202 (73.3%) participants were highly concerned about the security and privacy of their health records. This feeling was further accentuated when participants were asked about security of electronic systems. Participants were worried about hackers (79.4%), vendor access (72.7%), and malicious software (68%). Participants were also introduced to various security systems, and in each case, over 80% of participants believed that these would make EHR systems more secure. A number of chi-square tests were carried out with each variable, and it was found that there were strong relationships between age, location, computer use, EHR knowledge, and the concern for privacy and the security of medical records (P < .05). The survey also showed that there was a very small difference (9.8%) between health consumers who believed that paper records are more secure than EHRs and those who believed otherwise. The findings showed that for the EHR to be fully integrating in the health sector, there are 2 main issues that need to be addressed: The security of the EHR system has to be of the highest level, and needs to be constantly monitored and updated. The involvement of the health consumer in the ownership and maintenance of their health record needs to be more proactive. The EHR aims to collect information to allow for "cradle to the grave" treatment; thus, the health consumer has to be seen as a major player in ensuring that this can happen correctly. The results from this study indicated that the consumer is ready to accept the transition, as long as one can be assured of the security of the system.

  14. NOAA Weather Radio - Receiver Consumer Information

    Science.gov Websites

    retail outlets such as electronics, department, sporting goods, and boat and marine accessory stores and stores with an electronics department. NWR broadcasts are in the Public Service VHF frequencies, just Electronics, Inc 5185 Cliffwood Drive Montclair CA 91763 Customer Support: 866-KAITO76 (866-524-8676) Fax:(909

  15. Security Implications of Electronic Commerce: A Survey of Consumers and Businesses.

    ERIC Educational Resources Information Center

    Furnell, S. M.; Karweni, T.

    1999-01-01

    Examines general requirement for security technologies that provide a basis for trust in the electronic commerce environment. Discusses the results of two surveys that included general Internet users who are potential customers as well as commercial businesses, that considered attitudes to electronic commerce in general and options relating to…

  16. The Consumer Juggernaut: Web-Based and Mobile Applications as Innovation Pioneer

    NASA Astrophysics Data System (ADS)

    Messerschmitt, David G.

    As happened previously in electronics, software targeted at consumers is increasingly the focus of investment and innovation. Some of the areas where it is leading is animated interfaces, treating users as a community, audio and video information, software as a service, agile software development, and the integration of business models with software design. As a risk-taking and experimental market, and as a source of ideas, consumer software can benefit other areas of applications software. The influence of consumer software can be magnified by research into the internal organizations and processes of the innovative firms at its foundation.

  17. Employment Lessons from the Electronics Industry.

    ERIC Educational Resources Information Center

    Alic, John A.; Harris, Martha Caldwell

    1986-01-01

    Semiskilled and "unskilled" workers in semiconductors, computer manufacturing, and consumer electronics industries are more likely than other workers to lose jobs because of technology, imports, and offshore production. However, advances in technology do tend to create jobs for skilled workers. (CT)

  18. Evaluation of Miscellaneous and Electronic Device Energy Use in Hospitals

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Black, Douglas R.; Lanzisera, Steven M.; Lai, Judy

    2012-09-01

    Miscellaneous and electronic loads (MELs) consume about one-thirdof the primary energy used in US buildings, and their energy use is increasing faster than other end-uses. In healthcare facilities, 30percent of the annual electricity was used by MELs in 2008. This paper presents methods and challenges for estimating medical MELs energy consumption along with estimates of energy use in a hospital by combining device-level metered data with inventories and usage information. An important finding is that common, small devices consume large amounts of energy in aggregate and should not be ignored when trying to address hospital energy use.

  19. Making texts in electronic health records comprehensible to consumers: a prototype translator.

    PubMed

    Zeng-Treitler, Qing; Goryachev, Sergey; Kim, Hyeoneui; Keselman, Alla; Rosendale, Douglas

    2007-10-11

    Narrative reports from electronic health records are a major source of content for personal health records. We designed and implemented a prototype text translator to make these reports more comprehensible to consumers. The translator identifies difficult terms, replaces them with easier synonyms, and generates and inserts explanatory texts for them. In feasibility testing, the application was used to translate 9 clinical reports. Majority (68.8%) of text replacements and insertions were deemed correct and helpful by expert review. User evaluation demonstrated a non-statistically significant trend toward better comprehension when translation is provided (p=0.15).

  20. Making Texts in Electronic Health Records Comprehensible to Consumers: A Prototype Translator

    PubMed Central

    Zeng-Treitler, Qing; Goryachev, Sergey; Kim, Hyeoneui; Keselman, Alla; Rosendale, Douglas

    2007-01-01

    Narrative reports from electronic health records are a major source of content for personal health records. We designed and implemented a prototype text translator to make these reports more comprehensible to consumers. The translator identifies difficult terms, replaces them with easier synonyms, and generates and inserts explanatory texts for them. In feasibility testing, the application was used to translate 9 clinical reports. Majority (68.8%) of text replacements and insertions were deemed correct and helpful by expert review. User evaluation demonstrated a non-statistically significant trend toward better comprehension when translation is provided (p=0.15). PMID:18693956

  1. Consumer Sleep Technologies: A Review of the Landscape

    PubMed Central

    Ko, Ping-Ru T.; Kientz, Julie A.; Choe, Eun Kyoung; Kay, Matthew; Landis, Carol A.; Watson, Nathaniel F.

    2015-01-01

    Objective: To review sleep related consumer technologies, including mobile electronic device “apps,” wearable devices, and other technologies. Validation and methodological transparency, the effect on clinical sleep medicine, and various social, legal, and ethical issues are discussed. Methods: We reviewed publications from the digital libraries of the Association for Computing Machinery, Institute of Electrical and Electronics Engineers, and PubMed; publications from consumer technology websites; and mobile device app marketplaces. Search terms included “sleep technology,” “sleep app,” and “sleep monitoring.” Results: Consumer sleep technologies are categorized by delivery platform including mobile device apps (integrated with a mobile operating system and utilizing mobile device functions such as the camera or microphone), wearable devices (on the body or attached to clothing), embedded devices (integrated into furniture or other fixtures in the native sleep environment), accessory appliances, and conventional desktop/website resources. Their primary goals include facilitation of sleep induction or wakening, self-guided sleep assessment, entertainment, social connection, information sharing, and sleep education. Conclusions: Consumer sleep technologies are changing the landscape of sleep health and clinical sleep medicine. These technologies have the potential to both improve and impair collective and individual sleep health depending on method of implementation. Citation: Ko PR, Kientz JA, Choe EK, Kay M, Landis CA, Watson NF. Consumer sleep technologies: a review of the landscape. J Clin Sleep Med 2015;11(12):1455–1461. PMID:26156958

  2. Discriminating aging and protein-to-fat ratio in Cheddar cheese using sensory analysis and a potentiometric electronic tongue.

    PubMed

    Lipkowitz, Jackie B; Ross, Carolyn F; Diako, Charles; Smith, Denise M

    2018-03-01

    The objectives of this study were to evaluate the flavor and taste attributes of full-fat Cheddar cheeses with different protein-to-fat ratios (PFR) over aging time using a descriptive sensory analysis panel and a consumer panel, and to correlate these attributes with instrumental parameters obtained by the potentiometric electronic tongue. Three Cheddar cheese formulations (PFR of 0.74, 0.85, and 1.01) were produced in triplicate and composition was verified. Cheese was aged at 7.2°C and evaluated at 2, 5, 8, 10, 11, and 12 mo by a trained panel (n = 10) for 8 flavor and 5 taste attributes and using an electronic tongue for 7 nonvolatile taste attributes. Cheese aged for 12 mo was also evaluated by a consumer sensory panel for liking and intensity attributes. Principal component analysis was performed to discriminate cheese based on aging time and PFR, whereas correlation between sensory and instrumental attributes was assessed using partial least squares regression. Descriptive sensory analysis of flavor and taste attributes differentiated Cheddar cheeses over aging time, but not among PFR formulations. The electronic tongue distinguished changes among cheese samples due to PFR formulation and aging time. The electronic tongue proved successful in characterizing the nonvolatile flavor components in Cheddar cheese and correlated with taste perceptions measured by descriptive sensory analysis. Consumer evaluations showed distinctive attribute profiles for the 3 PFR Cheddar cheese formulations. Overall, higher fat content was associated with increased flavor intensities in Cheddar cheese and drove consumer acceptability and purchase intent ratings. The electronic tongue detected smaller changes in tastes (bitter, metallic, salty, sour, spicy, sweet, and umami) of the 3 PFR formulations over time when compared with the trained panelists, who detected no differences, suggesting that the electronic tongue may be more sensitive to tastants than humans and may have the capability for early detection or identification of problems in a batch of cheese during aging. Results suggest taste quality of cheese may be monitored using the electronic tongue with greater sensitivity than a trained panel, and may be more objective, rapid, and cost effective than human panelists. Copyright © 2018 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  3. An analysis of preferences for hazardous substances free products: manufacturing, use and end of life of mobile phones.

    PubMed

    Kaushal, Rajendra Kumar; Nema, Arvind K

    2012-11-01

    Electronic communication devices such as mobile phones pose significant environmental risks when disposed of after the end of their useful life. Mobile communication devices are one of the fastest growing contributors to the electronic waste (e-waste) stream. Recent legislative pressure and increasing awareness about the environmental risk associated with the hazardous components of the electronic products warrants the manufacturers to reduce or replace the hazardous materials with alternatives. The present study analyses the economic consequences of reducing or replacing these hazardous materials and the possible response of the consumers. A strategic game theory model has been applied in this paper for manufacturer and consumers considering the cost difference between hazardous substances free (HSF) and hazardous substance (HS) mobile. Results suggest that the HSF mobiles can be a preferred choice of the manufacturers as well as consumers if the cost of disposal of HS mobiles can be internalized and a marginal incentive (e.g. 0.9% for a cost difference to 5%, and 5.3% for a cost difference to 10%) is given. The study further highlights the need for realizing the fact that passing on the incentives to the consumers in order to promote schemes for return back to manufacturer at its end of life for effective reuse and recycling gives higher returns.

  4. 12 CFR 334.25 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing... by calling a single toll-free telephone number. (2) Opt-out methods that are not reasonable and...

  5. 12 CFR 334.25 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing... by calling a single toll-free telephone number. (2) Opt-out methods that are not reasonable and...

  6. 12 CFR 334.25 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing... by calling a single toll-free telephone number. (2) Opt-out methods that are not reasonable and...

  7. 12 CFR 334.25 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing... by calling a single toll-free telephone number. (2) Opt-out methods that are not reasonable and...

  8. 12 CFR 334.25 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing... by calling a single toll-free telephone number. (2) Opt-out methods that are not reasonable and...

  9. 12 CFR 571.26 - Delivery of opt-out notices.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Affiliate Marketing § 571.26 Delivery of opt-out notices. (a) In general. The opt-out notice must be... the notice on the Internet Web site at which the consumer obtained a product or service electronically... on an Internet Web site without requiring the consumer to acknowledge receipt of the notice. ...

  10. 12 CFR 41.26 - Delivery of opt-out notices.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Affiliate Marketing § 41.26 Delivery of opt-out notices. (a) In general. The opt-out notice must be provided... the notice on the Internet Web site at which the consumer obtained a product or service electronically... on an Internet Web site without requiring the consumer to acknowledge receipt of the notice. ...

  11. The Economics of Notebook Universities

    ERIC Educational Resources Information Center

    Bryan, John M. S.

    2007-01-01

    In the fall of 2006, students could purchase an entry-level notebook computer with a 15-inch LCD for $500. This price crossed an important threshold, moving notebooks into the range of consumer electronics--the category of phenomena that fuels mass consumer trends such as cell phones, digital cameras, and iPods. Most colleges and universities…

  12. 77 FR 6310 - Electronic Fund Transfers (Regulation E)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-07

    ... a one-time transfer or the first in a series of preauthorized transfers to occur more than 10 days... disclosures and receipts where a consumer schedules a one-time transfer or the first in a series of... where a consumer schedules a one-time transfer or the first in a series of preauthorized transfers to...

  13. 17 CFR 248.7 - Form of opt out notice to consumers; opt out methods.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... relationship terminates, the customer's opt out direction continues to apply to the nonpublic personal... establishes a new customer relationship with you, the opt out direction that applied to the former... notice in writing or, if the consumer agrees, electronically. (d) Joint relationships. (1) If two or more...

  14. 12 CFR 717.26 - Delivery of opt-out notices.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... CREDIT REPORTING Affiliate Marketing § 717.26 Delivery of opt-out notices. (a) In general. The opt-out... of actual notice. A consumer may reasonably be expected to receive actual notice if the affiliate... to a consumer who has agreed to receive electronic disclosures by e-mail from the affiliate providing...

  15. 12 CFR 334.26 - Delivery of opt-out notices.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... POLICY FAIR CREDIT REPORTING Affiliate Marketing § 334.26 Delivery of opt-out notices. (a) In general... expectation of actual notice. A consumer may reasonably be expected to receive actual notice if the affiliate... to a consumer who has agreed to receive electronic disclosures by e-mail from the affiliate providing...

  16. 12 CFR 334.26 - Delivery of opt-out notices.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... POLICY FAIR CREDIT REPORTING Affiliate Marketing § 334.26 Delivery of opt-out notices. (a) In general... expectation of actual notice. A consumer may reasonably be expected to receive actual notice if the affiliate... to a consumer who has agreed to receive electronic disclosures by e-mail from the affiliate providing...

  17. 12 CFR 717.26 - Delivery of opt-out notices.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... CREDIT REPORTING Affiliate Marketing § 717.26 Delivery of opt-out notices. (a) In general. The opt-out... of actual notice. A consumer may reasonably be expected to receive actual notice if the affiliate... to a consumer who has agreed to receive electronic disclosures by e-mail from the affiliate providing...

  18. 12 CFR 334.26 - Delivery of opt-out notices.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... POLICY FAIR CREDIT REPORTING Affiliate Marketing § 334.26 Delivery of opt-out notices. (a) In general... expectation of actual notice. A consumer may reasonably be expected to receive actual notice if the affiliate... to a consumer who has agreed to receive electronic disclosures by e-mail from the affiliate providing...

  19. 12 CFR 717.26 - Delivery of opt-out notices.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... CREDIT REPORTING Affiliate Marketing § 717.26 Delivery of opt-out notices. (a) In general. The opt-out... of actual notice. A consumer may reasonably be expected to receive actual notice if the affiliate... to a consumer who has agreed to receive electronic disclosures by e-mail from the affiliate providing...

  20. 76 FR 81019 - Electronic Fund Transfers (Regulation E)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-27

    ... public comment. SUMMARY: Title X of the Dodd-Frank Wall Street Reform and Consumer Protection Act (Dodd... CFR Part 205. The Dodd-Frank Wall Street Reform and Consumer Protection Act (Dodd-Frank Act) \\1...,'' because it was designed to be informational only and is unnecessary for the implementation of the EFTA, as...

  1. 12 CFR 222.21 - Affiliate marketing opt-out and exceptions.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ....21 Section 222.21 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE... Affiliate marketing opt-out and exceptions. (a) Initial notice and opt-out requirement—(1) In general. You... the consumer in writing or, if the consumer agrees, electronically, in a concise notice that you may...

  2. 12 CFR 334.24 - Reasonable opportunity to opt out.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Internet Web site at which the consumer has obtained a product or service. The consumer acknowledges... the time of an electronic transaction, such as a transaction conducted on an Internet Web site. The... indicate that they do not want to opt out. (5) By including in a privacy notice. The opt-out notice is...

  3. Audiotex Information Systems: Answering Consumer Queries Electronically. TDC Research Report No. 5.

    ERIC Educational Resources Information Center

    Conlan, Sharon; And Others

    A 14-month pilot of INFO-U, a fully automated telephone information service, assessed the feasibility of the technology in Minnesota Extension Service (MES) county offices to respond to consumer telephone queries. The project was designed to: (1) explore the potential of regional Extension cooperation and resource sharing; (2) increase recognition…

  4. 78 FR 5773 - Foreign-Trade Zone 22-Chicago, IL, Notification of Proposed Production Activity, Panasonic...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-28

    ... Electronics), Aurora, IL The Illinois International Port District, grantee of FTZ 22, submitted a notification... facility is used for the kitting of consumer electronics parts into retail packages. Pursuant to 15 CFR 400...

  5. Feasibility of Bluetooth Data as a Surrogate Measure of Vehicle Operations : Technical Summary

    DOT National Transportation Integrated Search

    2012-10-01

    The widespread use of portable electronic devices among consumers has allowed new opportunities for traffic data collection. Many of these devices contain short-range Bluetooth radios in addition to other electronic equipment. The included Bluetooth ...

  6. PILOT-SCALE STUDIES ON THE INCINERATION OF ELECTRONICS INDUSTRY WASTE

    EPA Science Inventory

    The paper describes experiments performed on a pilot-scale rotary kiln incinerator to investigate the emissions and operational behavior during the incineration of consumer electronics waste. These experiments were targeted at destroying the organic components of printed circuit ...

  7. Consumers with an intellectual disability and carers: perceptions of interactions with banks.

    PubMed

    Hayes, Susan C; Martin, Fiona B

    2007-03-01

    As more people with an intellectual disability reside independently in the community, there is both the need and the opportunity for them to use financial services, including banks and credit unions, and products such as cash machine cards, credit cards and loans. There is a dearth of information about interactions between consumers with intellectual disabilities and their carers, and financial service providers. This study investigated the perceptions of 94 consumers with an intellectual disability and 53 carers regarding interactions with financial service providers. Consumers and carers mentioned a number of problems with banks, and reported a low rate of successful resolution of these difficulties. Carers mentioned more problems than consumers, and more frequently reported intangible problems such as discrimination. The 'digital divide' was evident, with few consumers having access to Internet or telephone banking. People with intellectual disabilities need education programmes about electronic banking, their rights as consumers and their access to problem resolution strategies.

  8. Consumer Engagement in Health IT: Distinguishing Rhetoric from Reality.

    PubMed

    Gold, Marsha; Hossain, Mynti; Mangum, Amy

    2015-01-01

    Policymakers want health information technology (health IT) to support consumer engagement to help achieve national health goals. In this paper, we review the evidence to compare the rhetoric with the reality of current practice. Our environmental scan shows that consumer demand exists for electronic access to personal health information, but that technical and system or political barriers still limit the value of the available information and its potential benefits. There is a gap between current reality and the goals for consumer engagement. Actions that may help bridge this gap include: (1) resolving technical barriers to health information exchange (HIE); (2) developing more consumer-centric design and functionality; (3) reinforcing incentives that attract provider support by showing that consumer engagement is in their interest; and (4) building a stronger empirical case to convince decision makers that consumer engagement will lead to better care, improved health outcomes, and lower costs.

  9. Satisfying patient-consumer principles for health information exchange: evidence from California case studies.

    PubMed

    Miller, Robert H

    2012-03-01

    In June 2010 sixteen organizations representing California patients and consumers adopted nine principles for electronically exchanging health information among and within provider organizations. The principles were formulated with the goal of improving patient and population health care by increasing the availability and use of patient data while protecting patients' privacy. This study assesses to what extent five health care organizations-all in different stages of increasing their capacity for health information exchange-conformed to the principles in early 2011. Although an increasing amount of electronic data has been exchanged among organizations and with patients, progress has been modest, and patients still have little control over their data. For organizations to comply with all nine patient and consumer principles, clear "rules of the road" for information sharing must be defined, and patient education in health information exchange and control over personal data must be increased.

  10. Automated integration of continuous glucose monitor data in the electronic health record using consumer technology.

    PubMed

    Kumar, Rajiv B; Goren, Nira D; Stark, David E; Wall, Dennis P; Longhurst, Christopher A

    2016-05-01

    The diabetes healthcare provider plays a key role in interpreting blood glucose trends, but few institutions have successfully integrated patient home glucose data in the electronic health record (EHR). Published implementations to date have required custom interfaces, which limit wide-scale replication. We piloted automated integration of continuous glucose monitor data in the EHR using widely available consumer technology for 10 pediatric patients with insulin-dependent diabetes. Establishment of a passive data communication bridge via a patient's/parent's smartphone enabled automated integration and analytics of patient device data within the EHR between scheduled clinic visits. It is feasible to utilize available consumer technology to assess and triage home diabetes device data within the EHR, and to engage patients/parents and improve healthcare provider workflow. © The Author 2016. Published by Oxford University Press on behalf of the American Medical Informatics Association.

  11. Using Consumer Electronics and Apps in Industrial Environments - Development of a Framework for Dynamic Feature Deployment and Extension by Using Apps on Field Devices

    NASA Astrophysics Data System (ADS)

    Schmitt, Mathias

    2014-12-01

    The aim of this paper is to give a preliminary insight regarding the current work in the field of mobile interaction in industrial environments by using established interaction technologies and metaphors from the consumer goods industry. The major objective is the development and implementation of a holistic app-framework, which enables dynamic feature deployment and extension by using mobile apps on industrial field devices. As a result, field device functionalities can be updated and adapted effectively in accordance with well-known appconcepts from consumer electronics to comply with the urgent requirements of more flexible and changeable factory systems of the future. In addition, a much more user-friendly and utilizable interaction with field devices can be realized. Proprietary software solutions and device-stationary user interfaces can be overcome and replaced by uniform, cross-vendor solutions

  12. From electronic consumer products to e-wastes: Global outlook, waste quantities, recycling challenges.

    PubMed

    Tansel, Berrin

    2017-01-01

    Advancements in technology, materials development, and manufacturing processes have changed the consumer products and composition of municipal solid waste (MSW) since 1960s. Increasing quantities of discarded consumer products remain a major challenge for recycling efforts, especially for discarded electronic products (also referred as e-waste). The growing demand for high tech products has increased the e-waste quantities and its cross boundary transport globally. This paper reviews the challenges associated with increasing e-waste quantities. The increasing need for raw materials (especially for rare earth and minor elements) and unregulated e-waste recycling operations in developing and underdeveloped counties contribute to the growing concerns for e-waste management. Although the markets for recycled materials are increasing; there are major challenges for development of the necessary infrastructure for e-waste management and accountability as well as development of effective materials recovery technologies and product design. Copyright © 2016 Elsevier Ltd. All rights reserved.

  13. Consumer protection act for digital products

    NASA Astrophysics Data System (ADS)

    Hampel, Viktor E.

    1996-03-01

    This report proposes a `Consumer Protection Act for Digital Products' to support electronic commerce and to control the increasing abuse and lack of security on the national information highways. Patterned after the `Food and Drug Act of 1906 (21 USC)' and subsequent legislation, a new agency similar to that of the FDA would have the authority `to develop administrative policy with regard to the safety, effectiveness, and labeling of digital products and their communications for human use, and to review and evaluate new applications of such products.' Specifically, it is proposed that standards, originally developed by the defense industry for the labeling, enveloping, and authentication of digital products delivered to the Government, be extended to promote global electronic commerce by protecting the intellectual property rights of producers, establishing their liability for the end-use of digital products, and give consumers means for informed decision making and purchase.

  14. A randomised controlled trial of a consumer-focused e-health strategy for cardiovascular risk management in primary care: the Consumer Navigation of Electronic Cardiovascular Tools (CONNECT) study protocol.

    PubMed

    Redfern, Julie; Usherwood, T; Harris, M F; Rodgers, A; Hayman, N; Panaretto, K; Chow, C; Lau, A Y S; Neubeck, L; Coorey, G; Hersch, F; Heeley, E; Patel, A; Jan, S; Zwar, N; Peiris, D

    2014-01-31

    Fewer than half of all people at highest risk of a cardiovascular event are receiving and adhering to best practice recommendations to lower their risk. In this project, we examine the role of an e-health-assisted consumer-focused strategy as a means of overcoming these gaps between evidence and practice. Consumer Navigation of Electronic Cardiovascular Tools (CONNECT) aims to test whether a consumer-focused e-health strategy provided to Aboriginal and Torres Strait Islander and non-indigenous adults, recruited through primary care, at moderate-to-high risk of a cardiovascular disease event will improve risk factor control when compared with usual care. Randomised controlled trial of 2000 participants with an average of 18 months of follow-up to evaluate the effectiveness of an integrated consumer-directed e-health portal on cardiovascular risk compared with usual care in patients with cardiovascular disease or who are at moderate-to-high cardiovascular disease risk. The trial will be augmented by formal economic and process evaluations to assess acceptability, equity and cost-effectiveness of the intervention. The intervention group will participate in a consumer-directed e-health strategy for cardiovascular risk management. The programme is electronically integrated with the primary care provider's software and will include interactive smart phone and Internet platforms. The primary outcome is a composite endpoint of the proportion of people meeting the Australian guideline-recommended blood pressure (BP) and cholesterol targets. Secondary outcomes include change in mean BP and fasting cholesterol levels, proportion meeting BP and cholesterol targets separately, self-efficacy, health literacy, self-reported point prevalence abstinence in smoking, body mass index and waist circumference, self-reported physical activity and self-reported medication adherence. Primary ethics approval was received from the University of Sydney Human Research Ethics Committee and the Aboriginal Health and Medical Research Council. Results will be disseminated via the usual scientific forums including peer-reviewed publications and presentations at international conferences ACTRN12613000715774.

  15. 76 FR 44279 - Implementation of Section 304 of the Telecommunications Act of 1996: Commercial Availability of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-25

    ... Availability of Navigation Devices; Compatibility Between Cable Systems and Consumer Electronics Equipment... electronics equipment. DATES: The amendments to 47 CFR 76.1205(b)(1), 76.1205(b)(1)(i), 76.1205(b)(2), 76.1205...

  16. Remodelling Marketing Communications in an Internet Environment.

    ERIC Educational Resources Information Center

    Rowley, Jennifer

    2001-01-01

    Argues that the Internet demands a significant review of approaches to marketing communications, or promotion, as both the strategic and tactical levels. Highlights include electronic business and electronic commerce; comparing organizational and consumer markets; service development; objectives of marketing communications; and questions for…

  17. Warning Statements and Safety Practices among Manufacturers and Distributors of Electronic Cigarette Liquids in the United States.

    PubMed

    Fagan, Pebbles; Pokhrel, Pallav; Herzog, Thaddeus A; Guy, Mignonne C; Sakuma, Kari-Lyn K; Trinidad, Dennis R; Cassel, Kevin; Jorgensen, Dorothy; Lynch, Tania; Felicitas-Perkins, Jamie Q; Palafox, Sherilyn; Hamamura, Faith; Maloney, Sarah; Degree, Kaylah; Sterling, Kymberle; Moolchan, Eric; Clanton, Mark S; Eissenberg, Thomas

    2017-05-18

    Prior to the Food and Drug Administration's (FDA) regulation of electronic cigarettes and warning statements related to nicotine addiction, there was no critical examination of manufacturer/distributor voluntary practices that could potentially inform FDA actions aimed to protect consumers. This study examined the content of warning statements and safety characteristics of electronic cigarette liquid bottles using a national sample. Research staff randomly selected four electronic cigarette liquid manufacturers/distributors from four U.S. geographic regions. Staff documented the characteristics of product packaging and content of warning statements on 147 electronic cigarette liquids (0-30 mg/ml of nicotine) purchased online from 16 manufacturers/distributors in April of 2016. Data showed that 97.9% of the electronic cigarette liquid bottles included a warning statement, most of which focused on nicotine exposure rather than health. Only 22.4% of bottles used a warning statement that indicated the product "contained nicotine". Of bottles that advertised a nicotine-based concentration of 12 mg/ml, 26% had a warning statements stated that the product "contains nicotine". None of the statements that indicated that the product "contained nicotine" stated that nicotine was "addictive". All bottles had a safety cap and 12% were in plastic shrink-wrap. Fifty-six percent of the websites had a minimum age requirement barrier that prevented under-aged persons from entering. Most manufacturers/distributors printed a warning statement on electronic cigarette liquid bottles, but avoided warning consumers about the presence and the addictiveness of nicotine. Studies are needed to examine manufacturer/distributor modifications to product packaging and how packaging affects consumer behaviors. These data can inform future FDA requirements related to the packaging and advertising of e-cigarette liquids; regulation related to the content of warning statements, including exposure warning statements, which are not currently mandated; and requirements on websites or language on packaging to help manufacturers adhere to the minimum age of purchase regulation. The data can also be used to help FDA develop additional guidance on the framing of statements on packaging that helps consumers make informed decisions about purchasing the product or protecting young people from use or unintentional exposure to the product. © The Author 2017. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  18. Developing Online Trust in Electronic Commerce: A Generational Cohort Study in Puerto Rico

    ERIC Educational Resources Information Center

    Lopez Rivera, Ibrahim

    2016-01-01

    Developing online trust is crucial for e-commerce vendors in order to attract consumers and develop long-term relationships with existing ones. We intended to investigate if consumers from different generational cohorts differ on how they develop online trust when utilizing e-commerce websites. Through the analysis of empirical data collected from…

  19. 12 CFR Supplement I to Part 205 - Official Staff Interpretations

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ...) encoding to initiate a one-time ACH debit. For example, if a consumer authorizes a one-time ACH debit from... electronic terminal is involved at the time of the transaction, if the consumer's asset account is... receive a notice that the transaction will be processed as an EFT for each transaction at POS or each time...

  20. 12 CFR Supplement I to Part 205 - Official Staff Interpretations

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ...) encoding to initiate a one-time ACH debit. For example, if a consumer authorizes a one-time ACH debit from... electronic terminal is involved at the time of the transaction, if the consumer's asset account is... receive a notice that the transaction will be processed as an EFT for each transaction at POS or each time...

  1. 12 CFR Appendix B to Part 30 - Interagency Guidelines Establishing Information Security Standards

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... any record about an individual, whether in paper, electronic, or other form, that is a consumer report... term does not include any record that does not identify an individual. i. Examples. (1) Consumer... individual who applies for but does not receive a loan, including any loan sought by an individual for a...

  2. 12 CFR Appendix B to Part 30 - Interagency Guidelines Establishing Information Security Standards

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... any record about an individual, whether in paper, electronic, or other form, that is a consumer report... term does not include any record that does not identify an individual. i. Examples. (1) Consumer... individual who applies for but does not receive a loan, including any loan sought by an individual for a...

  3. The Influence of Typeface on Students' Perceptions of Online Instructors

    ERIC Educational Resources Information Center

    Louch, Michelle O'Brien; Stork, Elizabeth

    2014-01-01

    At its base, advertising is the process of using visual images and words to attract and convince consumers that a certain product has certain attributes. The same effect exists in electronic communication, strongly so in online courses where most if not all interaction between instructor and student is in writing. Arguably, if consumers make…

  4. Insights on alterations to the rumen ecosystem by nitrate and nitrocompounds

    USDA-ARS?s Scientific Manuscript database

    Nitrate and certain short chain nitrocompounds are being investigated as dietary supplements to reduce economic and environmental costs associated with ruminal methane emissions. Thermodynamically, nitrate is a preferred electron acceptor in the rumen that consumes electrons at the expense of metha...

  5. Patient Perceptions of Electronic Health Records

    ERIC Educational Resources Information Center

    Lulejian, Armine

    2011-01-01

    Research objective. Electronic Health Records (EHR) are expected to transform the way medicine is delivered with patients/consumers being the intended beneficiaries. However, little is known regarding patient knowledge and attitudes about EHRs. This study examined patient perceptions about EHR. Study design. Surveys were administered following…

  6. What Do Digital Books Mean for Libraries?

    ERIC Educational Resources Information Center

    Lynch, Clifford

    2001-01-01

    Discusses digital books, or electronic books, and their relationship to libraries and communication between authors and readers. Topics include the scholarly market, for academic libraries, versus the consumer market; textbooks versus novels; digitization of older books; marketing; costs; and electronic books versus printed books. (LRW)

  7. Alice in Debitland.

    ERIC Educational Resources Information Center

    Board of Governors of the Federal Reserve System, Washington, DC.

    Designed for the general public and possibly suitable also for high school economics students, this booklet examines the Electronic Fund Transfer Act (EFT), which protects consumers who use debit cards for the electronic transfer of funds. This commercially adapted version of the character in "Alice in Wonderland," uses a story-teller…

  8. Determinants affecting consumer adoption of contactless credit card: an empirical study.

    PubMed

    Wang, Yu-Min

    2008-12-01

    The contactless credit card is one of the most promising technological innovations in the field of electronic payments. It provides consumers with greater control of payments, convenience, and transaction speed. However, contactless credit cards have yet to gain significant rates of adoption in the marketplace. Thus, effort must be made to identify factors affecting consumer adoption of contactless credit cards. Based on the technology acceptance model, innovation diffusion theory, and the relevant literature, seven variables (perceived usefulness, perceived ease of use, compatibility, perceived risk, trust, consumer involvement, availability of infrastructure) are proposed to help predict consumer adoption of contactless credit cards. Data collected from 312 respondents in Taiwan is tested against the proposed prediction model using the logistic regression approach. The results and implications of our study contribute to an expanded understanding of the factors that affect consumer adoption of contactless credit cards.

  9. Electronic neuroprocessors

    NASA Technical Reports Server (NTRS)

    Thakoor, Anil

    1991-01-01

    The JPL Center for Space Microelectronics Technology (CSMT) is actively pursuing research in the neural network theory, algorithms, and electronics as well as optoelectronic neural net hardware implementations, to explore the strengths and application potential for a variety of NASA, DoD, as well as commercial application problems, where conventional computing techniques are extremely time-consuming, cumbersome, or simply non-existent. An overview of the JPL electronic neural network hardware development activities and some of the striking applications of the JPL electronic neuroprocessors are presented.

  10. Electronic Resource Management 2.0: Using Web 2.0 Technologies as Cost-Effective Alternatives to an Electronic Resource Management System

    ERIC Educational Resources Information Center

    Murray, Adam

    2008-01-01

    Designed to assist with the management of e-resources, electronic resource management (ERM) systems are time- and fund-consuming to purchase and maintain. Questions of system compatibility, data population, and workflow design/redesign can be difficult to answer; sometimes those answers are not what we'd prefer to hear. The two primary functions…

  11. The personal health record: consumers banking on their health.

    PubMed

    Ball, Marion J; Costin, Melinda Y; Lehmann, Christoph

    2008-01-01

    With personal health records (PHRs) acting much like ATM cards, increasingly wired consumers can "bank on health", accessing their own personal health information and a wide array of services. Consumer-owned, the PHR is dependent upon the existence of the legal electronic medical record (EMR) and interoperability. Working PHRs are in place in Veterans Health Administration, private health care institutions, and in the commercial sector. By allowing consumers to become involved in their own care, the PHR creates new roles and relationships. New tools change the clinician's workflow and thought flow, and pose new challenges for consumers. Key components of the PHR include the EMR and regional health information organizations (RHIOs); key strategies focus on human factors in successful project management. Online resources provided by the National Library of Medicine and Health On the Net help address consumer needs for information that is reliable and understandable. The growth of self-management tools adds to the challenge and the promise of PHRs for clinicians and consumers alike.

  12. Consumer Engagement in Health IT: Distinguishing Rhetoric from Reality

    PubMed Central

    Gold, Marsha; Hossain, Mynti; Mangum, Amy

    2015-01-01

    Rationale: Policymakers want health information technology (health IT) to support consumer engagement to help achieve national health goals. In this paper, we review the evidence to compare the rhetoric with the reality of current practice. Current Reality and Barriers: Our environmental scan shows that consumer demand exists for electronic access to personal health information, but that technical and system or political barriers still limit the value of the available information and its potential benefits. Conclusions and Policy Implications: There is a gap between current reality and the goals for consumer engagement. Actions that may help bridge this gap include: (1) resolving technical barriers to health information exchange (HIE); (2) developing more consumer-centric design and functionality; (3) reinforcing incentives that attract provider support by showing that consumer engagement is in their interest; and (4) building a stronger empirical case to convince decision makers that consumer engagement will lead to better care, improved health outcomes, and lower costs. PMID:26665120

  13. Fungicide residue identification and discrimination using a conducting polymer electronic-nose

    Treesearch

    Alphus D. Wilson

    2013-01-01

    The identification of fungicide residues on crop foliage is necessary to make periodic pest management decisions. The determination of fungicide residue identities currently is difficult and time consuming using conventional chemical analysis methods such as gas chromatography-mass spectroscopy. Different fungicide types produce unique electronic aroma signature...

  14. Predicting Stored Grain Insect Population Densities Using an Electronic Probe Trap

    USDA-ARS?s Scientific Manuscript database

    Manual sampling of insects in stored grain is a laborious and time consuming process. Automation of grain sampling should help to increase the adoption of stored-grain integrated pest management. A new commercial electronic grain probe trap (OPI Insector™) has recently been marketed. We field tested...

  15. Electronic Money.

    ERIC Educational Resources Information Center

    Schilling, Tim

    Thirty years ago a cashless society was predicted for the near future; paper currency and checks would be an antiquated symbol of the past. Consumers would embrace a new alternative for making payments: electronic money. But currency is still used for 87% of payments, mainly for "nickel and dime" purchases. And checks are the payment…

  16. Making Technology Work for Scholarship: Investing in the Data.

    ERIC Educational Resources Information Center

    Hockey, Susan

    This paper examines issues related to how providers and consumers can make the best use of electronic information, focusing on the humanities. Topics include: new technology or old; electronic text and data formats; Standard Generalized Markup Language (SGML); text encoding initiative; encoded archival description (EAD); other applications of…

  17. A Model for Web-based Information Systems in E-Retailing.

    ERIC Educational Resources Information Center

    Wang, Fang; Head, Milena M.

    2001-01-01

    Discusses the use of Web-based information systems (WIS) by electronic retailers to attract and retain consumers and deliver business functions and strategy. Presents an abstract model for WIS design in electronic retailing; discusses customers, business determinants, and business interface; and suggests future research. (Author/LRW)

  18. Frugal Droplet Microfluidics Using Consumer Opto-Electronics.

    PubMed

    Frot, Caroline; Taccoen, Nicolas; Baroud, Charles N

    2016-01-01

    The maker movement has shown how off-the-shelf devices can be combined to perform operations that, until recently, required expensive specialized equipment. Applying this philosophy to microfluidic devices can play a fundamental role in disseminating these technologies outside specialist labs and into industrial use. Here we show how nanoliter droplets can be manipulated using a commercial DVD writer, interfaced with an Arduino electronic controller. We couple the optical setup with a droplet generation and manipulation device based on the "confinement gradients" approach. This device uses regions of different depths to generate and transport the droplets, which further simplifies the operation and reduces the need for precise flow control. The use of robust consumer electronics, combined with open source hardware, leads to a great reduction in the price of the device, as well as its footprint, without reducing its performance compared with the laboratory setup.

  19. Frugal Droplet Microfluidics Using Consumer Opto-Electronics

    PubMed Central

    Frot, Caroline; Taccoen, Nicolas; Baroud, Charles N.

    2016-01-01

    The maker movement has shown how off-the-shelf devices can be combined to perform operations that, until recently, required expensive specialized equipment. Applying this philosophy to microfluidic devices can play a fundamental role in disseminating these technologies outside specialist labs and into industrial use. Here we show how nanoliter droplets can be manipulated using a commercial DVD writer, interfaced with an Arduino electronic controller. We couple the optical setup with a droplet generation and manipulation device based on the “confinement gradients” approach. This device uses regions of different depths to generate and transport the droplets, which further simplifies the operation and reduces the need for precise flow control. The use of robust consumer electronics, combined with open source hardware, leads to a great reduction in the price of the device, as well as its footprint, without reducing its performance compared with the laboratory setup. PMID:27560139

  20. Exploding the Black Box: Personal Computing, the Notebook Battery Crisis, and Postindustrial Systems Thinking.

    PubMed

    Eisler, Matthew N

    Historians of science and technology have generally ignored the role of power sources in the development of consumer electronics. In this they have followed the predilections of historical actors. Research, development, and manufacturing of batteries has historically occurred at a social and intellectual distance from the research, development, and manufacturing of the devices they power. Nevertheless, power source technoscience should properly be understood as an allied yet estranged field of electronics. The separation between the fields has had important consequences for the design and manufacturing of mobile consumer electronics. This paper explores these dynamics in the co-construction of notebook batteries and computers. In so doing, it challenges assumptions of historians and industrial engineers and planners about the nature of computer systems in particular and the development of technological systems. The co-construction of notebook computers and batteries, and the occasional catastrophic failure of their compatibility, challenges systems thinking more generally.

  1. Japan's technology and manufacturing infrastructure

    NASA Astrophysics Data System (ADS)

    Boulton, William R.; Meieran, Eugene S.; Tummala, Rao R.

    1995-02-01

    The JTEC panel found that, after four decades of development in electronics and manufacturing technologies, Japanese electronics companies are leaders in the development, support, and management of complex, low-cost packaging and assembly technologies used in the production of a broad range of consumer electronics products. The electronics industry's suppliers provide basic materials and equipment required for electronic packaging applications. Panelists concluded that some Japanese firms could be leading U.S. competitors by as much as a decade in these areas. Japan's technology and manufacturing infrastructure is an integral part of its microelectronics industry's success.

  2. Japan's technology and manufacturing infrastructure

    NASA Technical Reports Server (NTRS)

    Boulton, William R.; Meieran, Eugene S.; Tummala, Rao R.

    1995-01-01

    The JTEC panel found that, after four decades of development in electronics and manufacturing technologies, Japanese electronics companies are leaders in the development, support, and management of complex, low-cost packaging and assembly technologies used in the production of a broad range of consumer electronics products. The electronics industry's suppliers provide basic materials and equipment required for electronic packaging applications. Panelists concluded that some Japanese firms could be leading U.S. competitors by as much as a decade in these areas. Japan's technology and manufacturing infrastructure is an integral part of its microelectronics industry's success.

  3. Consumer input into health care: Time for a new active and comprehensive model of consumer involvement.

    PubMed

    Hall, Alix E; Bryant, Jamie; Sanson-Fisher, Rob W; Fradgley, Elizabeth A; Proietto, Anthony M; Roos, Ian

    2018-03-07

    To ensure the provision of patient-centred health care, it is essential that consumers are actively involved in the process of determining and implementing health-care quality improvements. However, common strategies used to involve consumers in quality improvements, such as consumer membership on committees and collection of patient feedback via surveys, are ineffective and have a number of limitations, including: limited representativeness; tokenism; a lack of reliable and valid patient feedback data; infrequent assessment of patient feedback; delays in acquiring feedback; and how collected feedback is used to drive health-care improvements. We propose a new active model of consumer engagement that aims to overcome these limitations. This model involves the following: (i) the development of a new measure of consumer perceptions; (ii) low cost and frequent electronic data collection of patient views of quality improvements; (iii) efficient feedback to the health-care decision makers; and (iv) active involvement of consumers that fosters power to influence health system changes. © 2018 The Authors Health Expectations published by John Wiley & Sons Ltd.

  4. Toward Enhancing the Social Benefits of Electronic Publishing. Report of an Aspen Institute Planning Meeting (Queenstown, Maryland, February 25-26, 1987). Communications and Society Forum Report #1.

    ERIC Educational Resources Information Center

    Rice, Michael

    Intended to investigate ways in which electronic publishing might be further developed to serve important consumer needs and social interests that have yet to become a focus for the industry, this two-day planning meeting consisted of roundtable discussions with 16 electronic publishing experts and practitioners. Following a presentation of the…

  5. Mechanically Milled Irregular Zinc Nanoparticles for Printable Bioresorbable Electronics.

    PubMed

    Mahajan, Bikram K; Yu, Xiaowei; Shou, Wan; Pan, Heng; Huang, Xian

    2017-05-01

    Bioresorbable electronics is predominantly realized by complex and time-consuming anhydrous fabrication processes. New technology explores printable methods using inks containing micro- or nano-bioresorbable particles (e.g., Zn and Mg). However, these particles have seldom been obtained in the context of bioresorbable electronics using cheap, reliable, and effective approaches with limited study on properties essential to printable electronics. Here, irregular nanocrystalline Zn with controllable sizes and optimized electrical performance is obtained through ball milling approach using polyvinylpyrrolidone (PVP) as a process control agent to stabilize Zn particles and prevent cold welding. Time and PVP dependence of the ball milled particles are studied with systematic characterizations of morphology and composition of the nanoparticles. The results reveal crystallized Zn nanoparticles with a size of ≈34.834 ± 1.76 nm and low surface oxidation. The resulting Zn nanoparticles can be readily printed onto bioresorbable substrates and sintered at room temperature using a photonic sintering approach, leading to a high conductivity of 44 643 S m -1 for printable zinc nanoparticles. The techniques to obtain Zn nanoparticles through ball milling and processing them through photonic sintering may potentially lead to a mass fabrication method for bioresorbable electronics and promote its applications in healthcare, environmental protection, and consumer electronics. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Consumer behaviour and environmental education in the field of waste electrical and electronic toys: a Spanish case study.

    PubMed

    Pérez-Belis, V; Bovea, M D; Simó, A

    2015-02-01

    This paper reports on a project focused on obtaining the current consumption and disposal habits of electrical and electronic toys from a survey aimed at parents of children of nine pre- and primary schools. In addition, it is also focused on identifying the most effective way of transmitting environmental information to parents and children to promote the collection of electrical and electronic toys at their end-of-life. The study was implemented in a Spanish municipality. With regard to the consumption habits, aspects related to the amount of toys that children receive annually and percentage of those which are electrical and electronic toys have been obtained and classified according to the family size. Results from Chi-squared analysis and Ordinal Logistic Regression show that there is a statistically significance relationship among these variables. Regarding disposal habits, aspects related to the reasons and way for discarding electrical and electronic toys, time that toys are kept at home or the willingness to rent or buy second hand e-toys have been obtained. What really attracts attention is that, apart from consumers who donate the toy to family or social associations, 67.1% of consumers discard them along with other waste fractions in domestic bins, whereas only 32.9% do so at recycling points, as Directive 2012/19/EU requires. To increase this percentage, three environmental education actions (distinguishing from each other by the way used to transmit the environmental information: paper, audiovisual or personal communication) have been designed, applied and evaluated their efficiency according to the amount of waste toys collected. Copyright © 2014 Elsevier Ltd. All rights reserved.

  7. The Electronic Dilemma of TV Advertising: Documentation, The Reactions of Business, Cultural Consequences and Consumer Implications. Working Paper No. 2.

    ERIC Educational Resources Information Center

    Sepstrup, Preben

    This discussion of the influence of advertising on the development of new media covers ways in which advertising uses the media and the implications of new information technologies for consumers and marketing activities. The first of four sections describes how television advertising has been altered by the development of new technologies--cable,…

  8. 16 CFR 680.25 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... a form that can be electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that...-out under the Act, by a single method, such as by calling a single toll-free telephone number. (2) Opt...

  9. 16 CFR 680.25 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... a form that can be electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that...-out under the Act, by a single method, such as by calling a single toll-free telephone number. (2) Opt...

  10. 16 CFR 680.25 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... a form that can be electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that...-out under the Act, by a single method, such as by calling a single toll-free telephone number. (2) Opt...

  11. 16 CFR 680.25 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... a form that can be electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that...-out under the Act, by a single method, such as by calling a single toll-free telephone number. (2) Opt...

  12. 16 CFR 680.25 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... a form that can be electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that...-out under the Act, by a single method, such as by calling a single toll-free telephone number. (2) Opt...

  13. The Future of Research Publishing: The eReport and eJournal.

    ERIC Educational Resources Information Center

    Krantz, Murray

    2003-01-01

    Considers the future of online publication of scientific journals and how electronic research reports (eReports) and electronic research journals (eJournals) will change the way research is reported, disseminated, consumed, and conducted by the scientific community. Suggests there will be a more interactive dynamic discourse between authors and…

  14. 77 FR 26674 - Enhancement of Electricity Market Surveillance and Analysis Through Ongoing Electronic Delivery...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-07

    ...; Order No. 760] Enhancement of Electricity Market Surveillance and Analysis Through Ongoing Electronic... ensure just and reasonable rates. \\1\\ 16 U.S.C. 825(b), 825f(a). II. Background 2. Wholesale electricity... consumers.\\4\\ \\2\\ A more in-depth discussion of developments in wholesale electricity markets--which no...

  15. Consumer Health Informatics--integrating patients, providers, and professionals online.

    PubMed

    Klein-Fedyshin, Michele S

    2002-01-01

    Consumer Health Informatics (CHI) means different things to patients, health professionals, and health care systems. A broader perspective on this new and rapidly developing field will enable us to understand and better apply its advances. This article provides an overview of CHI discussing its evolution and driving forces, along with advanced applications such as Personal Health Records, Internet transmission of personal health data, clinical e-mail, online pharmacies, and shared decision-making tools. Consumer Health Informatics will become integrated with medical care, electronic medical records, and patient education to impact the whole process and business of health care.

  16. Electric Energy Management in the Smart Home: Perspectives on Enabling Technologies and Consumer Behavior

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zipperer, Adam; Aloise-Young, Patricia A.; Suryanarayanan, Siddharth

    2013-11-01

    Smart homes hold the potential for increasing energy efficiency, decreasing costs of energy use, decreasing the carbon footprint by including renewable resources, and transforming the role of the occupant. At the crux of the smart home is an efficient electric energy management system that is enabled by emerging technologies in the electric grid and consumer electronics. This article presents a discussion of the state-of-the-art in electricity management in smart homes, the various enabling technologies that will accelerate this concept, and topics around consumer behavior with respect to energy usage.

  17. Electric Energy Management in the Smart Home: Perspectives on Enabling Technologies and Consumer Behavior

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zipperer, A.; Aloise-Young, P. A.; Suryanarayanan, S.

    2013-08-01

    Smart homes hold the potential for increasing energy efficiency, decreasing costs of energy use, decreasing the carbon footprint by including renewable resources, and trans-forming the role of the occupant. At the crux of the smart home is an efficient electric energy management system that is enabled by emerging technologies in the electricity grid and consumer electronics. This article presents a discussion of the state-of-the-art in electricity management in smart homes, the various enabling technologies that will accelerate this concept, and topics around consumer behavior with respect to energy usage.

  18. Consumer behaviour and environmental education in the field of waste electrical and electronic toys: A Spanish case study

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Pérez-Belis, V.; Bovea, M.D., E-mail: bovea@uji.es; Simó, A.

    Highlights: • Consumption/disposal habits of waste electrical and electronic toys. • Environmental education as a key factor to improve WEEE management. • Three environmental education actions to increase the collection of waste toys. - Abstract: This paper reports on a project focused on obtaining the current consumption and disposal habits of electrical and electronic toys from a survey aimed at parents of children of nine pre- and primary schools. In addition, it is also focused on identifying the most effective way of transmitting environmental information to parents and children to promote the collection of electrical and electronic toys at theirmore » end-of-life. The study was implemented in a Spanish municipality. With regard to the consumption habits, aspects related to the amount of toys that children receive annually and percentage of those which are electrical and electronic toys have been obtained and classified according to the family size. Results from Chi-squared analysis and Ordinal Logistic Regression show that there is a statistically significance relationship among these variables. Regarding disposal habits, aspects related to the reasons and way for discarding electrical and electronic toys, time that toys are kept at home or the willingness to rent or buy second hand e-toys have been obtained. What really attracts attention is that, apart from consumers who donate the toy to family or social associations, 67.1% of consumers discard them along with other waste fractions in domestic bins, whereas only 32.9% do so at recycling points, as Directive 2012/19/EU requires. To increase this percentage, three environmental education actions (distinguishing from each other by the way used to transmit the environmental information: paper, audiovisual or personal communication) have been designed, applied and evaluated their efficiency according to the amount of waste toys collected.« less

  19. Research strategies for safety evaluation of nanomaterials, part VII: evaluating consumer exposure to nanoscale materials.

    PubMed

    Thomas, Treye; Thomas, Karluss; Sadrieh, Nakissa; Savage, Nora; Adair, Patricia; Bronaugh, Robert

    2006-05-01

    Considerable media attention has recently been given to novel applications for products that contain nanoscale materials. These products could have utility in several industries that market consumer products, including textiles, sporting equipment, cosmetics, consumer electronics, and household cleaners. Some of the purported benefits of these products include improved performance, convenience, lower cost, as well as other desirable features, when compared to the conventional products that do not contain nanoscale materials. Although there are numerous likely consumer advantages from products containing nanoscale materials, there is very little information available regarding consumer exposure to the nanoscale materials in these products or any associated risks from these exposures. This paper seeks to review a limited subset of products that contain nanoscale materials, assess the available data for evaluating the consumer exposures and potential hazards associated with these products, and discuss the capacity of U.S. regulatory agencies to address the potential risks associated with these products.

  20. Research on the Influence of Perceived Risk in Consumer On-line Purchasing Decision

    NASA Astrophysics Data System (ADS)

    Hong, Zhao; Yi, Li

    Perceived risk is an important factor that affects consumer's on-line shopping purchasing decision, through the perceived theories the consumer can know clearly which step owns higher risk in the whole shopping process, then learn how to prevent it, this process also strengthen the consumer confidence, thus lowering to know that the risk adjudicate to the feeling, so the essay has important and realistic meaning for further expand the electronic commerce. At first, investigate, collect, tidy up, analyze the questionnaire information, and thus get the primary data. Finally try to find out the influence of perceived risk to each stage of purchasing decision during consumer on-line shopping process with data and personal analytical. The paper is a complement to the local and existing perceived theories. The result of the study manifests that, the order of main perceived risks which felt by consumer during on-line shopping process are as follow: financial risk, the performance risk and service risk.

  1. How consumers evaluate eWOM (electronic word-of-mouth) messages.

    PubMed

    Doh, Sun-Jae; Hwang, Jang-Sun

    2009-04-01

    This experiment explored how consumers evaluate electronic word-of-mouth (eWOM) messages about products. Each participant was exposed a 10-message set in a single board. Five groups were manipulated in terms of their ratios of positive and negative messages. The result showed significant differences across various sets of eWOM messages. Although more positive sets showed higher scores in many cases, this was not true in all situations, especially for the case of credibility. Involvement and prior knowledge partially moderated the relationship between the ratio of messages and the eWOM effect. The credibility of Web sites and eWOM messages can be damaged in the long run if all of the eWOM messages are positive.

  2. Perceived Compatibility and the Adoption of B2C E-Commerce by Non-buyers

    NASA Astrophysics Data System (ADS)

    Hernández-García, Ángel; Iglesias-Pradas, Santiago; Chaparro-Peláez, Julián; Pascual-Miguel, Félix

    The purpose of this article is to study the factors which affect the intention to buy online for users who have never made any prior purchase using the electronic channel, with special focus to the role of perceived compatibility. To do so, an adoption model for e-commerce was proposed on the basis of the Technology Adoption Model (TAM) and the Innovations Diffusion Theory (IDT). In order to validate the model, data gathered amongst Spanish consumers who had no experience using e-commerce, were analyzed using the partial least squares (PLS) method. The results have demonstrated the importance of perceived compatibility as a significant factor to foster non-buyers' adoption of electronic business-to-consumer e-commerce (eB2C).

  3. A methodology for evaluating the usability of audiovisual consumer electronic products.

    PubMed

    Kwahk, Jiyoung; Han, Sung H

    2002-09-01

    Usability evaluation is now considered an essential procedure in consumer product development. Many studies have been conducted to develop various techniques and methods of usability evaluation hoping to help the evaluators choose appropriate methods. However, planning and conducting usability evaluation requires considerations of a number of factors surrounding the evaluation process including the product, user, activity, and environmental characteristics. In this perspective, this study suggested a new methodology of usability evaluation through a simple, structured framework. The framework was outlined by three major components: the interface features of a product as design variables, the evaluation context consisting of user, product, activity, and environment as context variables, and the usability measures as dependent variables. Based on this framework, this study established methods to specify the product interface features, to define evaluation context, and to measure usability. The effectiveness of this methodology was demonstrated through case studies in which the usability of audiovisual products was evaluated by using the methods developed in this study. This study is expected to help the usability practitioners in consumer electronics industry in various ways. Most directly, it supports the evaluators' plan and conduct usability evaluation sessions in a systematic and structured manner. In addition, it can be applied to other categories of consumer products (such as appliances, automobiles, communication devices, etc.) with minor modifications as necessary.

  4. 12 CFR 41.25 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... means to opt out, such as a form that can be electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free... affiliate marketing opt-out under the Act, by a single method, such as by calling a single toll-free...

  5. 12 CFR 571.25 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... out, such as a form that can be electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that...-out under the Act, by a single method, such as by calling a single toll-free telephone number. (2) Opt...

  6. 12 CFR 571.25 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... out, such as a form that can be electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that...-out under the Act, by a single method, such as by calling a single toll-free telephone number. (2) Opt...

  7. 12 CFR 41.25 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... means to opt out, such as a form that can be electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free... affiliate marketing opt-out under the Act, by a single method, such as by calling a single toll-free...

  8. 12 CFR 571.25 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... out, such as a form that can be electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that...-out under the Act, by a single method, such as by calling a single toll-free telephone number. (2) Opt...

  9. 12 CFR 41.25 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... means to opt out, such as a form that can be electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free... affiliate marketing opt-out under the Act, by a single method, such as by calling a single toll-free...

  10. 12 CFR 41.25 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... means to opt out, such as a form that can be electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free... affiliate marketing opt-out under the Act, by a single method, such as by calling a single toll-free...

  11. 12 CFR 571.25 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... out, such as a form that can be electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that...-out under the Act, by a single method, such as by calling a single toll-free telephone number. (2) Opt...

  12. 12 CFR 571.25 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... out, such as a form that can be electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that...-out under the Act, by a single method, such as by calling a single toll-free telephone number. (2) Opt...

  13. 12 CFR 41.25 - Reasonable and simple methods of opting out.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... means to opt out, such as a form that can be electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free... affiliate marketing opt-out under the Act, by a single method, such as by calling a single toll-free...

  14. 12 CFR 205.16 - Disclosures at automated teller machines.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... which a consumer initiates an electronic fund transfer or a balance inquiry and that does not hold the account to or from which the transfer is made, or about which an inquiry is made. (b) General. An... transfer or a balance inquiry shall: (1) Provide notice that a fee will be imposed for providing electronic...

  15. Validity of electronic diet recording nutrient estimates compared to dietitian analysis of diet records: A randomized controlled trial

    USDA-ARS?s Scientific Manuscript database

    Background: Dietary intake assessment with diet records (DR) is a standard research and practice tool in nutrition. Manual entry and analysis of DR is time-consuming and expensive. New electronic tools for diet entry by clients and research participants may reduce the cost and effort of nutrient int...

  16. Electronic Payment System in Nigeria: Its Economic Benefits and Challenges

    ERIC Educational Resources Information Center

    Okifo, Joseph; Igbunu, Richard

    2015-01-01

    The crux of this study is on the adoption of E-payment system in Nigeria: Its economic benefits and challenges. The arrival of the internet has taken electronic payments and transactions to an exponential growth level. Consumers could purchase goods and services from the internet and send unencrypted credit card numbers across the network, which…

  17. Is there any legal and scientific basis for classifying electronic cigarettes as medications?

    PubMed

    Farsalinos, Konstantinos E; Stimson, Gerry V

    2014-05-01

    The rapid growth in the use of electronic cigarettes has been accompanied by substantial discussions by governments, international organisations, consumers and public health experts about how they might be regulated. In the European Union they are currently regulated under consumer legislation but new legislation will regulate them under the Tobacco Products Directive. However, several countries have sought to regulate them under medicines regulations. These claims have been successfully challenged in 6 court cases in European states. Under European legislation a product may be deemed to be a medicine by function if it is used in or administered to human beings either with a view to restoring, correcting or modifying physiological functions by exerting a pharmacological, immunological or metabolic action, or to making a medical diagnosis. It is a medicine by presentation if it is presented (e.g. by a manufacturer or distributor) as having properties for treating or preventing disease in human beings. We assess the legal and scientific basis for the claim that electronic cigarettes should be regulated as medicines. We conclude that they are neither medicine by function nor necessarily by presentation The main reason for their existence is as a harm reduction product in which the liking for and/or dependence on nicotine is maintained, and adoption of use is as a substitute for smoking and not as a smoking cessation product. In reality, they are used as consumer products providing pleasure to the user. They are not used to treat nicotine addiction or other disease, but to enable continued use of nicotine. Their use is adjusted individually by each consumer according to his or her perceived pleasure and satisfaction. Gaps in current regulation regarding safety and quality can be met by tailored regulations. Copyright © 2014 Elsevier B.V. All rights reserved.

  18. A repeatedly refuelable mediated biofuel cell based on a hierarchical porous carbon electrode

    NASA Astrophysics Data System (ADS)

    Fujita, Shuji; Yamanoi, Shun; Murata, Kenichi; Mita, Hiroki; Samukawa, Tsunetoshi; Nakagawa, Takaaki; Sakai, Hideki; Tokita, Yuichi

    2014-05-01

    Biofuel cells that generate electricity from renewable fuels, such as carbohydrates, must be reusable through repeated refuelling, should these devices be used in consumer electronics. We demonstrate the stable generation of electricity from a glucose-powered mediated biofuel cell through multiple refuelling cycles. This refuelability is achieved by immobilizing nicotinamide adenine dinucleotide (NAD), an electron-transfer mediator, and redox enzymes in high concentrations on porous carbon particles constituting an anode while maintaining their electrochemical and enzymatic activities after the immobilization. This bioanode can be refuelled continuously for more than 60 cycles at 1.5 mA cm-2 without significant potential drop. Cells assembled with these bioanodes and bilirubin-oxidase-based biocathodes can be repeatedly used to power a portable music player at 1 mW cm-3 through 10 refuelling cycles. This study suggests that the refuelability within consumer electronics should facilitate the development of long and repeated use of the mediated biofuel cells as well as of NAD-based biosensors, bioreactors, and clinical applications.

  19. A repeatedly refuelable mediated biofuel cell based on a hierarchical porous carbon electrode.

    PubMed

    Fujita, Shuji; Yamanoi, Shun; Murata, Kenichi; Mita, Hiroki; Samukawa, Tsunetoshi; Nakagawa, Takaaki; Sakai, Hideki; Tokita, Yuichi

    2014-05-13

    Biofuel cells that generate electricity from renewable fuels, such as carbohydrates, must be reusable through repeated refuelling, should these devices be used in consumer electronics. We demonstrate the stable generation of electricity from a glucose-powered mediated biofuel cell through multiple refuelling cycles. This refuelability is achieved by immobilizing nicotinamide adenine dinucleotide (NAD), an electron-transfer mediator, and redox enzymes in high concentrations on porous carbon particles constituting an anode while maintaining their electrochemical and enzymatic activities after the immobilization. This bioanode can be refuelled continuously for more than 60 cycles at 1.5 mA cm(-2) without significant potential drop. Cells assembled with these bioanodes and bilirubin-oxidase-based biocathodes can be repeatedly used to power a portable music player at 1 mW cm(-3) through 10 refuelling cycles. This study suggests that the refuelability within consumer electronics should facilitate the development of long and repeated use of the mediated biofuel cells as well as of NAD-based biosensors, bioreactors, and clinical applications.

  20. A repeatedly refuelable mediated biofuel cell based on a hierarchical porous carbon electrode

    PubMed Central

    Fujita, Shuji; Yamanoi, Shun; Murata, Kenichi; Mita, Hiroki; Samukawa, Tsunetoshi; Nakagawa, Takaaki; Sakai, Hideki; Tokita, Yuichi

    2014-01-01

    Biofuel cells that generate electricity from renewable fuels, such as carbohydrates, must be reusable through repeated refuelling, should these devices be used in consumer electronics. We demonstrate the stable generation of electricity from a glucose-powered mediated biofuel cell through multiple refuelling cycles. This refuelability is achieved by immobilizing nicotinamide adenine dinucleotide (NAD), an electron-transfer mediator, and redox enzymes in high concentrations on porous carbon particles constituting an anode while maintaining their electrochemical and enzymatic activities after the immobilization. This bioanode can be refuelled continuously for more than 60 cycles at 1.5 mA cm−2 without significant potential drop. Cells assembled with these bioanodes and bilirubin-oxidase-based biocathodes can be repeatedly used to power a portable music player at 1 mW cm−3 through 10 refuelling cycles. This study suggests that the refuelability within consumer electronics should facilitate the development of long and repeated use of the mediated biofuel cells as well as of NAD-based biosensors, bioreactors, and clinical applications. PMID:24820210

  1. Case study on risk evaluation of printed electronics using nanosilver ink.

    PubMed

    Kim, Ellen; Lee, Ji Hyun; Kim, Jin Kwon; Lee, Gun Ho; Ahn, Kangho; Park, Jung Duck; Yu, Il Je

    2016-01-01

    With the ever-increasing development of nanotechnology, our society is being surrounded by possible risks related to exposure to manufactured nanomaterials. The consumer market already includes many products that contain silver nanoparticles (AgNPs), including various household products, such as yoga mats, cutting boards, running shirts, and socks. There is a growing concern over the release of AgNPs in workplaces related to the manufacture and application of nanomaterials. This study investigated the release of AgNPs during the operation of a printed electronics printer. Using an exposure simulation chamber, a nanoparticle collector, scanning mobility particle sizer (SMPS), condensation particle counter (CPC), dust monitor, and mixed cellulose ester (MCE) filters are all connected to measure the AgNP exposure levels when operating a printed electronics printer. A very small amount of AgNPs was released during the operation of the printed electronics printer, and the number of AgNPs inside the exposure simulation chamber was lower than that outside background. In addition, when evaluating the potential risks for consumers and workers using a margin of exposure (MOE) approach and target MOE of 1000, the operational results far exceeded the target MOE in this simulation study and in a previous workplace exposure study. The overall results indicate a no-risk concern level in the case of printed electronics using nanosilver ink.

  2. Hematite Reduction Buffers Acid Generation and Enhances Nutrient Uptake by a Fermentative Iron Reducing Bacterium, Orenia metallireducens Strain Z6.

    PubMed

    Dong, Yiran; Sanford, Robert A; Chang, Yun-Juan; McInerney, Michael J; Fouke, Bruce W

    2017-01-03

    Fermentative iron-reducing organisms have been identified in a variety of environments. Instead of coupling iron reduction to respiration, they have been consistently observed to use ferric iron minerals as an electron sink for fermentation. In the present study, a fermentative iron reducer, Orenia metallireducens strain Z6, was shown to use iron reduction to enhance fermentation not only by consuming electron equivalents, but also by generating alkalinity that effectively buffers the pH. Fermentation of glucose by this organism in the presence of a ferric oxide mineral, hematite (Fe 2 O 3 ), resulted in enhanced glucose decomposition compared with fermentation in the absence of an iron source. Parallel evidence (i.e., genomic reconstruction, metabolomics, thermodynamic analyses, and calculation of electron transfer) suggested hematite reduction as a proton-consuming reaction effectively consumed acid produced by fermentation. The buffering effect of hematite was further supported by a greater extent of glucose utilization by strain Z6 in media with increasing buffer capacity. Such maintenance of a stable pH through hematite reduction for enhanced glucose fermentation complements the thermodynamic interpretation of interactions between microbial iron reduction and other biogeochemical processes. This newly discovered feature of iron reducer metabolism also has significant implications for groundwater management and contaminant remediation by providing microbially mediated buffering systems for the associated microbial and/or chemical reactions.

  3. The iPod Experiments: Michael Stephens Investigates Ways that Librarians Are Using This Popular Consumer Device

    ERIC Educational Resources Information Center

    Stephens, Michael

    2005-01-01

    No other consumer electronic device has created such an impact on popular culture in recent years as the Apple iPod. Since iPod's release in November 2001, music fans have been able to carry upwards of 15,000 song files on those sleek devices with their trendy white headphones. Over ten million iPods have been sold--nearly half of them in the last…

  4. Defining Data Access Pathways for Atmosphere to Electrons Wind Energy Data

    NASA Astrophysics Data System (ADS)

    Macduff, M.; Sivaraman, C.

    2016-12-01

    Atmosphere to Electrons (A2e), is a U.S. Department of Energy (DOE) Wind Program research initiative designed to optimize the performance of wind power plants by lowering the levelized cost of energy (LCOE). The Data Archive and Portal (DAP), managed by PNNL and hosted on Amazon Web Services, is a key capability of the A2e initiative. The DAP is used to collect, store, catalog, preserve and disseminate results from the experimental and computational studies representing a diverse user community requiring both open and proprietary data archival solutions(http://a2e.pnnl.gov). To enable consumer access to the data in DAP it is being built on a set of API's that are publically accessible. This includes persistent references for key meta-data objects as well as authenticated access to the data itself. The goal is to make the DAP catalog visible through a variety of data access paths bringing the data and metadata closer to the consumer. By providing persistent metadata records we hope to be able to build services that capture consumer utility and make referencing datasets easier.

  5. Meet EPA Scientist Diana Bless

    EPA Pesticide Factsheets

    EPA chemical engineer Diana Bless works on sustainable materials management research for rare earth elements in consumer electronics and approaches related to characterization, source control and treatment of mining-influenced waters.

  6. Process analysis of recycled thermoplasts from consumer electronics by laser-induced plasma spectroscopy.

    PubMed

    Fink, Herbert; Panne, Ulrich; Niessner, Reinhard

    2002-09-01

    An experimental setup for direct elemental analysis of recycled thermoplasts from consumer electronics by laser-induced plasma spectroscopy (LIPS, or laser-induced breakdown spectroscopy, LIBS) was realized. The combination of a echelle spectrograph, featuring a high resolution with a broad spectral coverage, with multivariate methods, such as PLS, PCR, and variable subset selection via a genetic algorithm, resulted in considerable improvements in selectivity and sensitivity for this complex matrix. With a normalization to carbon as internal standard, the limits of detection were in the ppm range. A preliminary pattern recognition study points to the possibility of polymer recognition via the line-rich echelle spectra. Several experiments at an extruder within a recycling plant demonstrated successfully the capability of LIPS for different kinds of routine on-line process analysis.

  7. Optical gesture sensing and depth mapping technologies for head-mounted displays: an overview

    NASA Astrophysics Data System (ADS)

    Kress, Bernard; Lee, Johnny

    2013-05-01

    Head Mounted Displays (HMDs), and especially see-through HMDs have gained renewed interest in recent time, and for the first time outside the traditional military and defense realm, due to several high profile consumer electronics companies presenting their products to hit market. Consumer electronics HMDs have quite different requirements and constrains as their military counterparts. Voice comments are the de-facto interface for such devices, but when the voice recognition does not work (not connection to the cloud for example), trackpad and gesture sensing technologies have to be used to communicate information to the device. We review in this paper the various technologies developed today integrating optical gesture sensing in a small footprint, as well as the various related 3d depth mapping sensors.

  8. Microelectronics in Japan

    NASA Astrophysics Data System (ADS)

    Boulton, William R.

    1995-02-01

    The purpose of this JTEC study is to evaluate Japan's electronic manufacturing and packaging capabilities within the context of global economic competition. To carry out this study, the JTEC panel evaluated the framework of the Japanese consumer electronics industry and various technological and organizational factors that are likely to determine who will win and lose in the marketplace. This study begins with a brief overview of the electronics industry, especially as it operates in Japan today. Succeeding chapters examine the electronics infrastructure in Japan and take an in-depth look at the central issues of product development in order to identify those parameters that will determine future directions for electronic packaging technologies.

  9. Microelectronics in Japan

    NASA Technical Reports Server (NTRS)

    Boulton, William R.

    1995-01-01

    The purpose of this JTEC study is to evaluate Japan's electronic manufacturing and packaging capabilities within the context of global economic competition. To carry out this study, the JTEC panel evaluated the framework of the Japanese consumer electronics industry and various technological and organizational factors that are likely to determine who will win and lose in the marketplace. This study begins with a brief overview of the electronics industry, especially as it operates in Japan today. Succeeding chapters examine the electronics infrastructure in Japan and take an in-depth look at the central issues of product development in order to identify those parameters that will determine future directions for electronic packaging technologies.

  10. Transient, biocompatible electronics and energy harvesters based on ZnO.

    PubMed

    Dagdeviren, Canan; Hwang, Suk-Won; Su, Yewang; Kim, Stanley; Cheng, Huanyu; Gur, Onur; Haney, Ryan; Omenetto, Fiorenzo G; Huang, Yonggang; Rogers, John A

    2013-10-25

    The combined use of ZnO, Mg, MgO, and silk provides routes to classes of thin-film transistors and mechanical energy harvesters that are soluble in water and biofluids. Experimental and theoretical studies of the operational aspects and dissolution properties of this type of transient electronics technology illustrate its various capabilities. Application opportunities range from resorbable biomedical implants, to environmentally dissolvable sensors, and degradable consumer electronics. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Epidemiology of infant ocular and periocular injuries from consumer products in the United States, 2001-2008.

    PubMed

    Chen, Allison J; Linakis, James G; Mello, Michael J; Greenberg, Paul B

    2013-06-01

    To quantify and characterize eye injuries related to consumer products in the infant population (0-12 months) treated in United States hospital emergency departments during the period from 2001 to 2008. This study is a descriptive analysis of consumer-product related eye injury data derived from the National Electronic Injury Surveillance System, a probability sample of 100 hospitals nationwide with 24-hour emergency departments. Narrative data were used to assign each case with the consumer products (CPs) causing the eye injury. The proportions of eye injury visits were calculated by age, sex, diagnosis, disposition, locale of incident, and CP categories. We examined the US Consumer Product Safety Commission National Electronic Injury Surveillance System data for all nonfatal eye injuries (853 cases) in the infant population (0-12 months) treated in US emergency departments from 2001 to 2008. These data can be used to project national, annual, weighted estimates of nonfatal injury treated in US emergency departments. There were an estimated 21,271 visits to US emergency departments by patients aged 0-12 months for CP-related eye injuries during the study period. Of these, 63% involved infants aged 9-12 months and 54% involved male patients; 78% of all injuries occurred at home. The CPs causing the most eye injuries belonged to the categories of chemical (46%) and household items (24%). Contusions and abrasions were the leading eye injuries diagnoses (37%). This study suggests that most CP-related infant eye injuries in the United States occur at home and are predominantly caused by chemicals and household products. Published by Mosby, Inc.

  12. Contributions to Industrial Development of Science and Technology Institutions in Malaysia, Nigeria, and Colombia and Opportunities for Bilateral Cooperation (A Cross-Country Comparative Analysis).

    DTIC Science & Technology

    1979-09-01

    inexpensive labor, and to modify products to meet the tastes of local consumers . Indeed, technology development for most industrial operations in these...of oil spills (Exxon) Local flavors added to toothpaste and cosmetics ( Colgate -Palmolive) Development of specialized electronic circuitry (Motorola...conditions, and to adjusting products to local consumer tastes. An exception is the Motorola laboratory in Penang. Using the highly skilled Chinese

  13. A personally controlled electronic health record for Australia

    PubMed Central

    Pearce, Christopher; Bainbridge, Michael

    2014-01-01

    Objective On July 1, 2012 Australia launched a personally controlled electronic health record (PCEHR) designed around the needs of consumers. Using a distributed model and leveraging key component national eHealth infrastructure, the PCEHR is designed to enable sharing of any health information about a patient with them and any other health practitioner involved in their care to whom the patient allows access. This paper discusses the consumer-facing part of the program. Method Design of the system was through stakeholder consultation and the development of detailed requirements, followed by clinical design assurance. Results Patients are able to access any posted information through a web-accessible ‘consumer portal.’ Within the portal they are able to assert access controls on all or part of their record. The portal includes areas for consumers to record their own personal information. Discussion The PCEHR has the potential to transform the ability of patients to actively engage in their own healthcare, and to enable the emerging partnership model of health and healthcare in medicine. The ability to access health information traditionally kept within the closed walls of institutions also raises challenges for the profession, both in the language clinicians choose and the ethical issues raised by the changed roles and responsibilities. Conclusions The PCEHR is aimed at connecting all participants and their interventions, and is intended to become a system-wide activity. PMID:24650635

  14. Injuries Associated With Hazards Involving Motor Vehicle Batteries

    DOT National Transportation Integrated Search

    1997-07-01

    National Highway Traffic Safety Administration's (NHTSA) National Center for : Statistics recently examined data from the Consumer Product Safety Commission's : (CPSC) National Electronic Injury Surveillance (NEISS) on cases involving : injuries burn...

  15. Biologic Medications for Psoriasis

    MedlinePlus

    ... Student Debt Special Report All Money More on Money Best & Worst Banks According to Consumer Reports Members ... Appliances Babies & Kids Cars Electronics Health Home & Garden Money A-Z Index Magazine & Books Current Issue Magazine ...

  16. Radiation characteristics of input power from surface wave sustained plasma antenna

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Naito, T., E-mail: Naito.Teruki@bc.MitsubishiElectric.co.jp; Yamaura, S.; Fukuma, Y.

    This paper reports radiation characteristics of input power from a surface wave sustained plasma antenna investigated theoretically and experimentally, especially focusing on the power consumption balance between the plasma generation and the radiation. The plasma antenna is a dielectric tube filled with argon and small amount of mercury, and the structure is a basic quarter wavelength monopole antenna at 2.45 GHz. Microwave power at 2.45 GHz is supplied to the plasma antenna. The input power is partially consumed to sustain the plasma, and the remaining part is radiated as a signal. The relationship between the antenna gain and the input powermore » is obtained by an analytical derivation and numerical simulations. As a result, the antenna gain is kept at low values, and most of the input power is consumed to increase the plasma volume until the tube is filled with the plasma whose electron density is higher than the critical electron density required for sustaining the surface wave. On the other hand, the input power is consumed to increase the electron density after the tube is fully filled with the plasma, and the antenna gain increases with increasing the electron density. The dependence of the antenna gain on the electron density is the same as that of a plasma antenna sustained by a DC glow discharge. These results are confirmed by experimental results of the antenna gain and radiation patterns. The antenna gain of the plasma is a few dB smaller than that of the identical metal antenna. The antenna gain of the plasma antenna is sufficient for the wireless communication, although it is difficult to substitute the plasma antenna for metal antennas completely. The plasma antenna is suitable for applications having high affinity with the plasma characteristics such as low interference and dynamic controllability.« less

  17. Best Medications to Treat Fibromyalgia

    MedlinePlus

    ... Student Debt Special Report All Money More on Money Best & Worst Banks According to Consumer Reports Members ... Appliances Babies & Kids Cars Electronics Health Home & Garden Money A-Z Index Magazine & Books Current Issue Magazine ...

  18. 7 CFR 1710.205 - Minimum approval requirements for all load forecasts.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... electronically to RUS computer software applications. RUS will evaluate borrower load forecasts for readability...'s engineering planning documents, such as the construction work plan, incorporate consumer and usage...

  19. 7 CFR 1710.205 - Minimum approval requirements for all load forecasts.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... electronically to RUS computer software applications. RUS will evaluate borrower load forecasts for readability...'s engineering planning documents, such as the construction work plan, incorporate consumer and usage...

  20. 7 CFR 1710.205 - Minimum approval requirements for all load forecasts.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... electronically to RUS computer software applications. RUS will evaluate borrower load forecasts for readability...'s engineering planning documents, such as the construction work plan, incorporate consumer and usage...

  1. Questionnaire survey of customer satisfaction for product categories towards certification of ergonomic quality in design.

    PubMed

    Mochimaru, Masaaki; Takahashi, Miwako; Hatakenaka, Nobuko; Horiuchi, Hitoshi

    2012-01-01

    Customer satisfaction was surveyed for 6 product categories (consumer electronics, daily commodities, home equipment, information systems, cars, and health appliances) by questionnaires based on the Analytic Hierarchy Process. Analyzing weight of evaluation factors, the 6 product categories were reorganized into 4 categories, those were related to 4 aspects in daily living that formed by two axes: home living - mobility life and healthy life - active communication. It was found that consumers were attracted by the actual user test by public institutes for all product categories. The certification based on the design process standard established by authorities, such as EQUID was the second best attractor for consumers.

  2. The Design of a Portable and Deployable Solar Energy System for Deployed Military Applications

    DTIC Science & Technology

    2011-04-01

    Abstract- Global Positioning Systems, thermal imaging scopes, satellite phones, and other electronic devices are critical to the warfighter in... imaging scopes, satellite phones, and other electronic devices are critical to the warfighter in Forward Operating Environments. Many are battery operated...Technology & Engineering 24. Kumar, Shrawan, Mital, Anil, Electromyography in ergonomics 25. Stanton, Neville Human factors in consumer products, CRC

  3. The use of electronic games in therapy: a review with clinical implications.

    PubMed

    Horne-Moyer, H Lynn; Moyer, Brian H; Messer, Drew C; Messer, Elizabeth S

    2014-12-01

    Therapists and patients enjoy and benefit from interventions that use electronic games (EG) in health care and mental health settings, with a variety of diagnoses and therapeutic goals. We reviewed the use of electronic games designed specifically for a therapeutic purpose, electronic games for psychotherapy (EGP), also called serious games, and commercially produced games used as an adjunct to psychotherapy, electronic games for entertainment (EGE). Recent research on the benefits of EG in rehabilitation settings, EGP, and EGE indicates that electronic methods are often equivalent to more traditional treatments and may be more enjoyable or acceptable, at least to some consumers. Methodological concerns include the lack of randomized controlled trials (RCT) for many applications. Suggestions are offered for using EG in therapeutic practice.

  4. The influence of residents' behaviour on waste electrical and electronic equipment collection effectiveness.

    PubMed

    Nowakowski, Piotr

    2016-11-01

    Government agencies have implemented regulations to reduce the volume of waste electrical and electronic equipment to protect the environment and encourage recycling. The effectiveness of systems through which waste electrical and electronic equipment is collected and recycled depends on (a) the development and operation of new programmes to process this material and (b) on information dissemination programmes aimed at manufacturers, retail sellers, and the consuming public. This study analyses these two elements. The main focus is to better understand household residents' behaviour in regards to the proper methods of handling waste electrical and electronic equipment and possible storage of the obsolete equipment that brings disturbances with collection of the waste equipment. The study explores these issues depending on size of municipality and the household residents' knowledge about legal methods of post-consumer management of waste electrical and electronic equipment in Poland, where the collection rate of that type of waste is about 40% of the total mass of waste electrical and electronic equipment appearing in the market.The research was informed by various sources of information, including non-government organisations, Inspectorate of Environmental Protection and Central Statistics Office in Poland, questionnaires, and interviews with the household residents. The questionnaires were distributed to daytime and vocational students from different universities and the customers of an electronic equipment superstore. The results show that a resident's behaviour in regards to the handling of obsolete waste electrical and electronic equipment can significantly reduce the collection rate, especially when the waste is discarded improperly - mixed with municipal waste or sold in scrapyards. It is possible to identify points that are necessary to be improved to achieve a higher collection rate. © The Author(s) 2016.

  5. Shapeable magnetoelectronics

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Makarov, Denys, E-mail: d.makarov@hzdr.de, E-mail: m.melzer@ifw-dresden.de; Helmholtz-Zentrum Dresden-Rossendorf e.V., Institute of Ion Beam Physics and Materials Research, 01328 Dresden; Melzer, Michael, E-mail: d.makarov@hzdr.de, E-mail: m.melzer@ifw-dresden.de

    Inorganic nanomembranes are shapeable (flexible, printable, and even stretchable) and transferrable to virtually any substrate. These properties build the core concept for new technologies, which transform otherwise rigid high-speed devices into their shapeable counterparts. This research is motivated by the eagerness of consumer electronics towards being thin, lightweight, flexible, and even wearable. The realization of this concept requires all building blocks as we know them from rigid electronics (e.g., active elements, optoelectronics, magnetoelectronics, and energy storage) to be replicated in the form of (multi)functional nanomembranes, which can be reshaped on demand after fabrication. There are already a variety of shapeablemore » devices commercially available, i.e., electronic displays, energy storage elements, and integrated circuitry, to name a few. From the beginning, the main focus was on the fabrication of shapeable high-speed electronics and optoelectronics. Only very recently, a new member featuring magnetic functionalities was added to the family of shapeable electronics. With their unique mechanical properties, the shapeable magnetic field sensor elements readily conform to ubiquitous objects of arbitrary shapes including the human skin. This feature leads electronic skin systems beyond imitating the characteristics of its natural archetype and extends their cognition to static and dynamic magnetic fields that by no means can be perceived by human beings naturally. Various application fields of shapeable magnetoelectronics are proposed. The developed sensor platform can equip soft electronic systems with navigation, orientation, motion tracking, and touchless control capabilities. A variety of novel technologies, such as smart textiles, soft robotics and actuators, active medical implants, and soft consumer electronics, will benefit from these new magnetic functionalities. This review reflects the establishment of shapeable magnetic sensorics, describing the entire development from the first attempts to verify the functional concept to the realization of ready-to-use highly compliant and strain invariant sensor devices with remarkable robustness.« less

  6. Bromine in plastic consumer products - Evidence for the widespread recycling of electronic waste.

    PubMed

    Turner, Andrew; Filella, Montserrat

    2017-12-01

    A range of plastic consumer products and components thereof have been analysed by x-ray fluorescence (XRF) spectrometry in a low density mode for Br as a surrogate for brominated flame retardant (BFR) content. Bromine was detected in about 42% of 267 analyses performed on electronic (and electrical) samples and 18% of 789 analyses performed on non-electronic samples, with respective concentrations ranging from 1.8 to 171,000μgg -1 and 2.6 to 28,500μgg -1 . Amongst the electronic items, the highest concentrations of Br were encountered in relatively small appliances, many of which predated 2005 (e.g. a fan heater, boiler thermostat and smoke detector, and various rechargers, light bulb collars and printed circuit boards), and usually in association with Sb, a component of antimony oxide flame retardant synergists, and Pb, a heavy metal additive and contaminant. Amongst the non-electronic samples, Br concentrations were highest in items of jewellery, a coffee stirrer, a child's puzzle, a picture frame, and various clothes hangers, Christmas decorations and thermos cup lids, and were often associated with the presence of Sb and Pb. These observations, coupled with the presence of Br at concentrations below those required for flame-retardancy in a wider range of electronic and non-electronic items, are consistent with the widespread recycling of electronic plastic waste. That most Br-contaminated items were black suggests the current and recent demand for black plastics in particular is met, at least partially, through this route. Given many Br-contaminated items would evade the attention of the end-user and recycler, their disposal by conventional municipal means affords a course of BFR entry into the environment and, for food-contact items, a means of exposure to humans. Copyright © 2017 Elsevier B.V. All rights reserved.

  7. Shapeable magnetoelectronics

    NASA Astrophysics Data System (ADS)

    Makarov, Denys; Melzer, Michael; Karnaushenko, Daniil; Schmidt, Oliver G.

    2016-03-01

    Inorganic nanomembranes are shapeable (flexible, printable, and even stretchable) and transferrable to virtually any substrate. These properties build the core concept for new technologies, which transform otherwise rigid high-speed devices into their shapeable counterparts. This research is motivated by the eagerness of consumer electronics towards being thin, lightweight, flexible, and even wearable. The realization of this concept requires all building blocks as we know them from rigid electronics (e.g., active elements, optoelectronics, magnetoelectronics, and energy storage) to be replicated in the form of (multi)functional nanomembranes, which can be reshaped on demand after fabrication. There are already a variety of shapeable devices commercially available, i.e., electronic displays, energy storage elements, and integrated circuitry, to name a few. From the beginning, the main focus was on the fabrication of shapeable high-speed electronics and optoelectronics. Only very recently, a new member featuring magnetic functionalities was added to the family of shapeable electronics. With their unique mechanical properties, the shapeable magnetic field sensor elements readily conform to ubiquitous objects of arbitrary shapes including the human skin. This feature leads electronic skin systems beyond imitating the characteristics of its natural archetype and extends their cognition to static and dynamic magnetic fields that by no means can be perceived by human beings naturally. Various application fields of shapeable magnetoelectronics are proposed. The developed sensor platform can equip soft electronic systems with navigation, orientation, motion tracking, and touchless control capabilities. A variety of novel technologies, such as smart textiles, soft robotics and actuators, active medical implants, and soft consumer electronics, will benefit from these new magnetic functionalities. This review reflects the establishment of shapeable magnetic sensorics, describing the entire development from the first attempts to verify the functional concept to the realization of ready-to-use highly compliant and strain invariant sensor devices with remarkable robustness.

  8. Best Drugs to Treat Inflammatory Bowel Disease

    MedlinePlus

    ... Student Debt Special Report All Money More on Money Best & Worst Banks According to Consumer Reports Members ... Appliances Babies & Kids Cars Electronics Health Home & Garden Money A-Z Index Magazine & Books Current Issue Magazine ...

  9. 6 Tips to Avoid Medication Mistakes

    MedlinePlus

    ... marketing the Electronic Medication Management Assistant (EMMA), a programmable device that stores and dispenses prescription medication for ... Of Your Health Care Team (article) Consumer Educational Materials: What You Need to Know to Use Medicine ...

  10. Injuries Associated With Hazards Involving Motor Vehicle Power Windows

    DOT National Transportation Integrated Search

    1997-05-01

    National Highway Traffic Safety Administration's (NHTSA) National Center for : Statistics and Analysis (NCSA) recently completed a study of data from the : Consumer Product Safety Commission's (CPSC) National Electronic Injury : Surveillance System (...

  11. Materials and applications of bioresorbable electronics

    NASA Astrophysics Data System (ADS)

    Huang, Xian

    2018-01-01

    Bioresorbable electronics is a new type of electronics technology that can potentially lead to biodegradable and dissolvable electronic devices to replace current built-to-last circuits predominantly used in implantable devices and consumer electronics. Such devices dissolve in an aqueous environment in time periods from seconds to months, and generate biological safe products. This paper reviews materials, fabrication techniques, and applications of bioresorbable electronics, and aims to inspire more revolutionary bioresorbable systems that can generate broader social and economic impact. Existing challenges and potential solutions in developing bioresorbable electronics have also been presented to arouse more joint research efforts in this field to build systematic technology framework. Project supported by the National Natural Science Foundation of China (No. 61604108) and the Natural Science Foundation of Tianjin (No. 16JCYBJC40600).

  12. Cost-benefit study of consumer product take-back programs using IBM's WIT reverse logistics optimization tool

    NASA Astrophysics Data System (ADS)

    Veerakamolmal, Pitipong; Lee, Yung-Joon; Fasano, J. P.; Hale, Rhea; Jacques, Mary

    2002-02-01

    In recent years, there has been increased focus by regulators, manufacturers, and consumers on the issue of product end of life management for electronics. This paper presents an overview of a conceptual study designed to examine the costs and benefits of several different Product Take Back (PTB) scenarios for used electronics equipment. The study utilized a reverse logistics supply chain model to examine the effects of several different factors in PTB programs. The model was done using the IBM supply chain optimization tool known as WIT (Watson Implosion Technology). Using the WIT tool, we were able to determine a theoretical optimal cost scenario for PTB programs. The study was designed to assist IBM internally in determining theoretical optimal Product Take Back program models and determining potential incentives for increasing participation rates.

  13. Electronic evaluation for video commercials by impression index.

    PubMed

    Kong, Wanzeng; Zhao, Xinxin; Hu, Sanqing; Vecchiato, Giovanni; Babiloni, Fabio

    2013-12-01

    How to evaluate the effect of commercials is significantly important in neuromarketing. In this paper, we proposed an electronic way to evaluate the influence of video commercials on consumers by impression index. The impression index combines both the memorization and attention index during consumers observing video commercials by tracking the EEG activity. It extracts features from scalp EEG to evaluate the effectiveness of video commercials in terms of time-frequency-space domain. And, the general global field power was used as an impression index for evaluation of video commercial scenes as time series. Results of experiment demonstrate that the proposed approach is able to track variations of the cerebral activity related to cognitive task such as observing video commercials, and help to judge whether the scene in video commercials is impressive or not by EEG signals.

  14. Religious Media Use Among African Americans, Black Caribbeans, and Non-Hispanic Whites

    PubMed Central

    Chatters, Linda M.

    2014-01-01

    The purpose of this study was to examine the correlates of watching religious television programs and listening to religious radio programs. Data are taken from the National Survey of American Life, a nationally representative study of African Americans, Black Caribbeans, and non-Hispanic Whites. Several significant findings were noted. Both African Americans and Black Caribbeans watched religious television programs and listened to religious radio programs significantly more frequently than non-Hispanic whites. These differences in electronic religious media consumption were particularly large, especially listening to religious radio programming. Among African Americans and Black Caribbeans, several significant demographic differences in frequency of consuming religious programming (e.g., age, gender, region, marital status, immigration status) emerged. Lastly, our analysis found that consuming electronic religious programming did not substitute for attending church service but, instead, complemented weekly service attendance. PMID:26045698

  15. Composition and Elution Behavior of Various Elements from Printed Circuit Boards, Cathode-ray Tube Glass, and Liquid-crystal Displays in Waste Consumer Electronics.

    PubMed

    Inaba, Kazuho; Murata, Tomoyoshi; Yamamura, Shigeki; Nagano, Masaaki; Iwasaki, Kazuhiro; Nakajima, Daisuke; Takigami, Hidetaka

    2018-01-01

    The contents and elution behavior of metals in consumer electronics parts were determined so as to understand their maximum environmental risk. Elements contained most in printed-circuit boards were Cu, Si, Br, Ca, Al, Sn, Pb, Sb, Ba, Fe, Ni, Ti, and Zn; in cathode-ray tube glass were Si, Pb, Ba, Sr, Zn, Zr, Ca, and Sb; in arsenic contained liquid-crystal displays were Si, Ca, Sr, Ba, As, and Fe; and in antimony contained liquid-crystal displays were Si, Ba, Ca, Sb, Sr, Fe, and Sn. The elements eluted most from printed-circuit boards were Zn, Pb, and Cu; from cathode-ray tube glass were Pb, Zn, B, Ba, and Si; and from liquid-crystal displays were B and Si, and the toxic As and Sb. The amount eluted was greatest at acidic pH. It was revealed that officially recommended 6-h-shaking with a pure water test was insufficient to understand the real environmental risk of waste electronics.

  16. Applications of energy harvesting for ultralow power technology

    NASA Astrophysics Data System (ADS)

    Pop-Vadean, A.; Pop, P. P.; Barz, C.; Chiver, O.

    2015-06-01

    Ultra-low-power (ULP) technology is enabling a wide range of new applications that harvest ambient energy in very small amounts and need little or no maintenance - self-sustaining devices that are capable of perpetual or nearly perpetual operation. These new systems, which are now appearing in industrial and consumer electronics, also promise great changes in medicine and health. Until recently, the idea of micro-scale energy harvesting, and collecting miniscule amounts of ambient energy to power electronic systems, was still limited to research proposals and laboratory experiments.Today an increasing number of systems are appearing that take advantage of light, vibrations and other forms of previously wasted environmental energy for applications where providing line power or maintaining batteries is inconvenient. In the industrial world, where sensors gather information from remote equipment and hazardous processes; in consumer electronics, where mobility and convenience are served; and in medical systems, with unique requirements for prosthetics and non-invasive monitoring, energy harvesting is rapidly expanding into new applications.This paper serves as a survey for applications of energy harvesting for ultra low power technology based on various technical papers available in the public domain.

  17. Trial of an electronic decision support system to facilitate shared decision making in community mental health.

    PubMed

    Woltmann, Emily M; Wilkniss, Sandra M; Teachout, Alexandra; McHugo, Gregory J; Drake, Robert E

    2011-01-01

    Involvement of community mental health consumers in mental health decision making has been consistently associated with improvements in health outcomes. Electronic decision support systems (EDSSs) that support both consumer and provider decision making may be a sustainable way to improve dyadic communication in a field with approximately 50% workforce turnover per year. This study examined the feasibility of such a system and investigated proximal outcomes of the system's performance. A cluster randomized design was used to evaluate an EDSS at three urban community mental health sites. Case managers (N=20) were randomly assigned to the EDSS-supported planning group or to the usual care planning group. Consumers (N=80) were assigned to the same group as their case managers. User satisfaction with the care planning process was assessed for consumers and case managers (possible scores range from 1 to 5, with higher summary scores indicating more satisfaction). Recall of the care plan was assessed for consumers. Linear regression with adjustment for grouping by worker was used to assess satisfaction scores. A Wilcoxon rank-sum test was used to examine knowledge of the care plan. Compared with case managers in the control group, those in the intervention group were significantly more satisfied with the care planning process (mean ± SD score=4.0 ± .5 versus 3.3 ± .5; adjusted p=.01). Compared with consumers in the control group, those in the intervention group had significantly greater recall of their care plans three days after the planning session (mean proportion of plan goals recalled=75% ± 28% versus 57% ± 32%; p=.02). There were no differences between the clients in the intervention and control groups regarding satisfaction. This study demonstrated that clients can build their own care plans and negotiate and revise them with their case managers using an EDSS.

  18. Requirement analysis to promote small-sized E-waste collection from consumers.

    PubMed

    Mishima, Kuniko; Nishimura, Hidekazu

    2016-02-01

    The collection and recycling of small-sized waste electrical and electronic equipment is an emerging problem, since these products contain certain amounts of critical metals and rare earths. Even if the amount is not large, having a few supply routes for such recycled resources could be a good strategy to be competitive in a world of finite resources. The small-sized e-waste sometimes contains personal information, therefore, consumers are often reluctant to put them into recycling bins. In order to promote the recycling of E-waste, collection of used products from the consumer becomes important. Effective methods involving incentives for consumers might be necessary. Without such methods, it will be difficult to achieve the critical amounts necessary for an efficient recycling system. This article focused on used mobile phones among information appliances as the first case study, since it contains relatively large amounts of valuable metals compared with other small-sized waste electrical and electronic equipment and there are a large number of products existing in the market. The article carried out surveys to determine what kind of recycled material collection services are preferred by consumers. The results clarify that incentive or reward money alone is not a driving force for recycling behaviour. The article discusses the types of effective services required to promote recycling behaviour. The article concludes that securing information, transferring data and providing proper information about resources and environment can be an effective tool to encourage a recycling behaviour strategy to promote recycling, plus the potential discount service on purchasing new products associated with the return of recycled mobile phones. © The Author(s) 2015.

  19. 12 CFR 1030.11 - Additional disclosure requirements for overdraft services.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... telephone response machine, ATM, or an institution's Internet site, is not a response to a consumer... electronic media, such as television or radio; (iv) An advertisement made on outdoor media, such as...

  20. 12 CFR 1030.11 - Additional disclosure requirements for overdraft services.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... telephone response machine, ATM, or an institution's Internet site, is not a response to a consumer... electronic media, such as television or radio; (iv) An advertisement made on outdoor media, such as...

  1. 12 CFR 1030.11 - Additional disclosure requirements for overdraft services.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... telephone response machine, ATM, or an institution's Internet site, is not a response to a consumer... electronic media, such as television or radio; (iv) An advertisement made on outdoor media, such as...

  2. Wheelchair User Injuries and Deaths Associated with Motor Vehicle Related Incidents

    DOT National Transportation Integrated Search

    1997-09-01

    National Highway Traffic Safety Administration's National Center for Statistics : and Analysis (NCSA) recently completed a study of data from the Consumer Product : Safety Commission's (CPSC) National Electronic Injury Surveillance System : (NEISS) o...

  3. 77 FR 13127 - Agency Information Collection Activities; Proposed Collection; Comment Request; Extension

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-05

    ... electronics, small appliances, furniture, and other transactions. (Only consumer leases for more than four... transactions reflect a net decrease from prior FTC estimates, given current market conditions and the new PRA...

  4. A Delphi Study Assessing Long-Term Access to Electronic Medical Records (EMR)

    DTIC Science & Technology

    2008-03-01

    Americans surveyed would prefer physicians and insurance companies that use electronic medical records to those that do not (Swartz, 2007). Based on...procedures performed or medication(s) issued for health history and insurance purposes. A large portion of a physician’s workday is consumed with...disconnect existed between the Social Uses Life/Health Insurance Employment/Licensing Public Health Medical Research Social/Welfare Programs Law

  5. Public attitudes toward health information exchange: perceived benefits and concerns.

    PubMed

    Dimitropoulos, Linda; Patel, Vaishali; Scheffler, Scott A; Posnack, Steve

    2011-12-01

    To characterize consumers' attitudes regarding the perceived benefits of electronic health information exchange (HIE), potential HIE privacy and security concerns, and to analyze the intersection of these concerns with perceived benefits. A cross-sectional study. A random-digit-dial telephone survey of English-speaking adults was conducted in 2010. Multivariate logistic regression models examined the association between consumer characteristics and concerns related to the security of electronic health records (EHRs) and HIE. A majority of the 1847 respondents reported they were either "very" or "somewhat" concerned about privacy of HIE (70%), security of HIE (75%), or security of EHRs (82%). Concerns were significantly higher (P <.05) among employed individuals 40 to 64 years old and minorities. Many believed that HIE would confer benefits such as improved coordination of care (89%). Overall, 75% agreed that the benefits of EHRs outweighed risks to privacy and security, and 60% would permit HIE for treatment purposes even if the physician might not be able to protect their privacy all of the time. Over half (52%) wanted to choose which providers access and share their data. Greater participation by consumers in determining how HIE takes place could engender a higher degree of trust among all demographic groups, regardless of their varying levels of privacy and security concerns. Addressing the specific privacy and security concerns of minorities, individuals 40 to 64 years old, and employed individuals will be critical to ensuring widespread consumer participation in HIE.

  6. Energy services in the information age: The convergence of energy, communications, and information technologies

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Centolella, P.A.

    1998-07-01

    Most of the economic efficiency benefits of electric restructuring--consumer choice based on price and risk preferences, efficient capacity utilization, capacity expansion that reflects marketability, and innovative products--depend upon consumer access to information and opportunities to respond to time- and location-specific prices and customized products. Information and communications technologies from back-room data management centers to intelligent consumer gateways will play an essential role in marketing energy services in a retail access environment. This paper describes the role of information and communications technology in electric industry restructuring and retailing of energy services. It includes a survey of economic analyses on the likelymore » variability in competitive generation prices and consumer responses if such prices are effectively communicated. The paper describes the potential benefits and cost savings associated with flexible consumer responses to price variability. It identifies consumer loads and preferences. Finally, the paper describes the building blocks of information systems being developed to facilitate price-responsive energy management and provide a range of other energy services. Intelligent gateways, analytical tools for facility load prediction and optimizing energy management responses, and electronic commerce applications are discussed.« less

  7. Organic electronics: Battery-like artificial synapses

    NASA Astrophysics Data System (ADS)

    Yang, J. Joshua; Xia, Qiangfei

    2017-04-01

    Borrowing the operating principles of a battery, a three-terminal organic switch has been developed on a flexible plastic substrate. The device consumes very little power and can be used as an artificial synapse for brain-inspired computing.

  8. Sorption of Organophosphorus Flame Retardants on Settled Dust

    EPA Science Inventory

    Organophosphorus flame retardants (OPFRs) are widely used as additives in industrial and consumer products such as electrical and electronic products, furniture, plastics, textiles, and building/construction materials. Due to human exposure and potential health effects, OPFRs inc...

  9. Are You Taking the Right Treatment for Your High Cholesterol?

    MedlinePlus

    ... Student Debt Special Report All Money More on Money Best & Worst Banks According to Consumer Reports Members ... Appliances Babies & Kids Cars Electronics Health Home & Garden Money A-Z Index Magazine & Books Current Issue Magazine ...

  10. Health Informatics.

    ERIC Educational Resources Information Center

    Russell, Marie; Brittain, J. Michael

    2002-01-01

    Identifies current trends and issues in health informatics with examples of applications, particularly in English-speaking countries. Topics include health systems, professionals, and patients; consumer health information; electronic medical records; nursing; privacy and confidentiality; finding and using information; the Internet; e-mail;…

  11. Can an iPod Touch be used to assess whole-body vibration associated with mining equipment?

    PubMed

    Wolfgang, Rebecca; Di Corleto, Luke; Burgess-Limerick, Robin

    2014-11-01

    The cost and complexity of commercially available whole-body vibration measurement devices is a barrier to the systematic collection of the information required to manage this hazard. The potential for a consumer electronic device to be used to estimate whole-body vibration was assessed by collecting 58 simultaneous pairs of acceleration measurements in three dimensions from a fifth-generation iPod Touch and gold standard whole-body vibration measurement devices, while a range of heavy mining equipment was operated at three surface coal mines. The results suggest that accelerometer data gathered from a consumer electronic device are able to be used to measure whole-body vibration amplitude with 95% confidence of ±0.06 m s(-2) root mean square for the vertical direction (1.96 × standard deviation of the constant error). © The Author 2014. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

  12. Organic core-sheath nanowire artificial synapses with femtojoule energy consumption.

    PubMed

    Xu, Wentao; Min, Sung-Yong; Hwang, Hyunsang; Lee, Tae-Woo

    2016-06-01

    Emulation of biological synapses is an important step toward construction of large-scale brain-inspired electronics. Despite remarkable progress in emulating synaptic functions, current synaptic devices still consume energy that is orders of magnitude greater than do biological synapses (~10 fJ per synaptic event). Reduction of energy consumption of artificial synapses remains a difficult challenge. We report organic nanowire (ONW) synaptic transistors (STs) that emulate the important working principles of a biological synapse. The ONWs emulate the morphology of nerve fibers. With a core-sheath-structured ONW active channel and a well-confined 300-nm channel length obtained using ONW lithography, ~1.23 fJ per synaptic event for individual ONW was attained, which rivals that of biological synapses. The ONW STs provide a significant step toward realizing low-energy-consuming artificial intelligent electronics and open new approaches to assembling soft neuromorphic systems with nanometer feature size.

  13. Liquid lens based on electrowetting: a new adaptive component for imaging applications in consumer electronics

    NASA Astrophysics Data System (ADS)

    Crassous, Jerome; Gabay, Claude; Liogier, Gaetan; Berge, Bruno

    2004-12-01

    A new technology for focus variation with direct electric control without moving part will be presented. The technology relies on an interface between two non-miscible transparent liquids, which can be deformed by electrowetting. This technology has been developed since 10 years in the lab and starts to be available commercially, with the following characteristics: large amplitude of dioptric correction (20 dioptries for a 5mm pupil size), fast response, small power consumption and good transmission in the visible range, clear pupil 1-10mm diameter. This paper will show the basic principle, as well as the physical limitations and optical aberrations due to differential thermal expansion of the two liquids in the cell. Experimental measurements made with a Schack Hartmann wave front analyzer will be presented, as well as numerical simulations of the liquid-liquid interface. Applications will be discussed, mainly in consumer electronics.

  14. An electronic consumer health library: NetWellness.

    PubMed Central

    Guard, R; Haag, D; Kaya, B; Marine, S; Morris, T; Schick, L; Shoemaker, S

    1996-01-01

    NetWellness is a community-based, consumer-defined grant program supporting the delivery of electronic health information to rural residents of southern Ohio and urban and suburban communities in the Greater Cincinnati tri-state region. NetWellness is a collaboratively developed and publicly and privately funded demonstration project. Information is delivered via ISDN, standard dial, dedicated network connections, and the Internet. TriState Online (Greater Cincinnati's Free-Net) and other southern Ohio Free-Nets are key access points in the larger project communities. The other access points are more than forty workstations distributed at public sites throughout the project's primary geographical area. Design strengths and limitations, training initiatives, technical issues, and the project's impact on medical librarianship are examined in this paper. Also discussed are ways of determining community needs and interest, building political alliances, finding and developing funding sources, and overcoming technical obstacles. NetWellness's Internet address is: http:@www.netwellness.org. PMID:8913548

  15. A qualitative study of Swedes' opinions about shared electronic health records.

    PubMed

    Lehnbom, Elin C; McLachlan, Andrew J; Brien, Jo-anne E

    2013-01-01

    European countries are world-leading in the development and implementation of e-Health. In Sweden, all primary healthcare centres and most hospitals use digital records. Some regions use the same software which allows for clinical information to be shared (regionally shared EHRs), but there is a movement towards making all EHRs inter-operable to allow for a National Patient Summary (NPS). The aim of this study was to explore the opinions of Swedish consumers and health professionals about shared EHRs and the NPS. Semi-structered phone interviews were conducted with consumers and health professionals. The majority of interviewed health professionals were currently using regionally shared EHRs. In their experience, having access to regionally shared EHRs facilitated a holistic patient approach, assisted in patient follow-up, and reduced inappropriate (over)prescribing. Consumers had a poor level of knowledge about shared EHRs and the NPS. Unlike health professionals, consumers perceived a NPS to be of great value. The findings indicate that there was a discrepancy between health professionals and consumers' knowledge of, and the perceived need for, a NPS.

  16. Insinuating electronics in the brain.

    PubMed

    Hughes, Mark A

    2016-08-01

    There is an expanding interface between electronic engineering and neurosurgery. Rapid advances in microelectronics and materials science, driven largely by consumer demand, are inspiring and accelerating development of a new generation of diagnostic, therapeutic, and prosthetic devices for implantation in the nervous system. This paper reviews some of the basic science underpinning their development and outlines some opportunities and challenges for their use in neurosurgery. Copyright © 2016 The Author. Published by Elsevier Ltd.. All rights reserved.

  17. Biodegradation of Polychlorinated Methanes in Methanogenic Systems

    DTIC Science & Technology

    1991-01-01

    occurring toxicant and C-1 growth substrate. J. General Microbiol. 132:1139-1142. 18. Hoover, S. R. and N. Porges. 1952. Assimilation of dairy wastes by...carbon and electron donor source; (3) to examine the level of micronutrients - provided as yeast extract (YE) - needed in the system feed; (4) to...provided the electron donor needed to consume oxygen and lower the redox potential in the precolumn; YE provided micronutrients . No reductant (Na2S

  18. Membranes in Lithium Ion Batteries

    PubMed Central

    Yang, Min; Hou, Junbo

    2012-01-01

    Lithium ion batteries have proven themselves the main choice of power sources for portable electronics. Besides consumer electronics, lithium ion batteries are also growing in popularity for military, electric vehicle, and aerospace applications. The present review attempts to summarize the knowledge about some selected membranes in lithium ion batteries. Based on the type of electrolyte used, literature concerning ceramic-glass and polymer solid ion conductors, microporous filter type separators and polymer gel based membranes is reviewed. PMID:24958286

  19. Physiological function of hydrogen metabolism during growth of sulfidogenic bacteria on organic substrates.

    PubMed Central

    Lupton, F S; Conrad, R; Zeikus, J G

    1984-01-01

    Desulfovibrio vulgaris Madison and Thermodesulfobacterium commune contained functionally distinct hydrogenase activities, one which exchanged 3H2 into 3H2O and was inhibited by carbon monoxide and a second activity which produced H2 in the presence of CO. Cell suspensions of D. vulgaris used either lactate, pyruvate, or CO as the electron donor for H2 production in the absence of sulfate. Both sulfidogenic species produced and consumed hydrogen as a trace gas during growth on lactate or pyruvate as electron donors and on thiosulfate or sulfate as electron acceptors. Higher initial levels of hydrogen were detected during growth on lactate-sulfate than on pyruvate-sulfate. D. vulgaris but not T. commune also produced and then consumed CO during growth on organic electron donors and sulfate or thiosulfate. High partial pressures of exogenous H2 inhibited growth and substrate consumption when D. vulgaris was cultured on pyruvate alone but not when it was metabolizing pyruvate plus sulfate or lactate plus sulfate. The data are discussed in relation to supporting two different models for the physiological function of H2 metabolism during growth of sulfidogenic bacteria on organic electron donors plus sulfate. A trace H2 transformation model is proposed for control of redox processes during growth on either pyruvate or lactate plus sulfate, and an obligate H2 cycling model is proposed for chemiosmotic energy coupling during growth on CO plus sulfate. PMID:6480553

  20. Sale of prescription drugs over the Internet.

    PubMed

    Armstrong, K; Bloom, B S

    1999-01-01

    Online drugstores represent one of the hottest categories in electronic commerce. The Internet offers great promise in expanding access to prescription drugs for the disabled, the elderly, and people living in rural areas. But with this promise comes the danger of eliminating the safeguards that protect consumers from inappropriate use of medications and adverse drug events. This Issue Brief highlights two studies that investigate the availability of prescription drugs over the Internet, and focuses on the alarming ease with which consumers can obtain drugs without seeing a physician or a pharmacist.

  1. DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    Energy storage, which has revolutionized consumer electronics, is poised to change the way we drive our cars and the way we generate and use electricity. Leveraging four decades of numerous path-breaking innovations in energy storage, Argonne is leading the way in ushering in this change.

  2. HEALTH RISK ASSESSMENT OF ENGINEERED-MANUFACTURED NANOMATERIALS: RESEARCH CHALLENGES AND PRELIMINARY FINDINGS

    EPA Science Inventory

    Nanotechnology continues to produce a diversity of engineered nanomaterials (NMs), displaying novel physicochemical properties with applications in commercial, consumer, electronic, biomedical, energy, and environmental sectors. Nanotechnology has been referred to as the next in...

  3. Sorption of Organophosphorus Flame-Retardants on Settled Dust

    EPA Science Inventory

    Dust is an important sink for indoor air pollutants, such as organophosphorus flame-retardants (OPFRs) that are used as additives in industrial and consumer products including electrical and electronic products, furniture, plastics, textile, and building/construction materials. T...

  4. NANOMATERIAL HEALTH EFFECTS RESEARCH CONTRIBUTES TO RISK MANAGEMENT STRATEGIES THROUGH THE RISK ASSESSMENT PARADIGM

    EPA Science Inventory

    Nanotechnology continues to produce a diversity of engineered nanomaterials displaying novel physicochemical properties with applications in commercial, consumer, electronic, biomedical, energy, and environmental sectors. Nanotechnology has been referred to as the next industrial...

  5. Sorption of Organophosphorus Flame Retardants (OPFRs) on Settled Dust

    EPA Science Inventory

    Organophosphorus flame retardants (OPFRs) are widely used as additives in industrial and consumer products such as electrical and electronic products, furniture, plastics, textiles, and building/construction materials. Due to human exposure and potential health effects, OPFRs inc...

  6. Modern Electronic Devices: An Increasingly Common Cause of Skin Disorders in Consumers.

    PubMed

    Corazza, Monica; Minghetti, Sara; Bertoldi, Alberto Maria; Martina, Emanuela; Virgili, Annarosa; Borghi, Alessandro

    2016-01-01

    : The modern conveniences and enjoyment brought about by electronic devices bring with them some health concerns. In particular, personal electronic devices are responsible for rising cases of several skin disorders, including pressure, friction, contact dermatitis, and other physical dermatitis. The universal use of such devices, either for work or recreational purposes, will probably increase the occurrence of polymorphous skin manifestations over time. It is important for clinicians to consider electronics as potential sources of dermatological ailments, for proper patient management. We performed a literature review on skin disorders associated with the personal use of modern technology, including personal computers and laptops, personal computer accessories, mobile phones, tablets, video games, and consoles.

  7. Chapter 14: Electron Microscopy on Thin Films for Solar Cells

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Romero, Manuel; Abou-Ras, Daniel; Nichterwitz, Melanie

    2016-07-22

    This chapter overviews the various techniques applied in scanning electron microscopy (SEM) and transmission electron microscopy (TEM), and highlights their possibilities and also limitations. It gives the various imaging and analysis techniques applied on a scanning electron microscope. The chapter shows that imaging is divided into that making use of secondary electrons (SEs) and of backscattered electrons (BSEs), resulting in different contrasts in the images and thus providing information on compositions, microstructures, and surface potentials. Whenever aiming for imaging and analyses at scales of down to the angstroms range, TEM and its related techniques are appropriate tools. In many cases,more » also SEM techniques provide the access to various material properties of the individual layers, not requiring specimen preparation as time consuming as TEM techniques. Finally, the chapter dedicates to cross-sectional specimen preparation for electron microscopy. The preparation decides indeed on the quality of imaging and analyses.« less

  8. Window-assisted nanosphere lithography for vacuum micro-nano-electronics

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Li, Nannan; Institute of Electronic Engineering, Chinese Academy of Engineering Physics, Mianyang, 621900; Pang, Shucai

    2015-04-15

    Development of vacuum micro-nano-electronics is quite important for combining the advantages of vacuum tubes and solid-state devices but limited by the prevailing fabricating techniques which are expensive, time consuming and low-throughput. In this work, window-assisted nanosphere lithography (NSL) technique was proposed and enabled the low-cost and high-efficiency fabrication of nanostructures for vacuum micro-nano-electronic devices, thus allowing potential applications in many areas. As a demonstration, we fabricated high-density field emitter arrays which can be used as cold cathodes in vacuum micro-nano-electronic devices by using the window-assisted NSL technique. The details of the fabricating process have been investigated. This work provided amore » new and feasible idea for fabricating nanostructure arrays for vacuum micro-nano-electronic devices, which would spawn the development of vacuum micro-nano-electronics.« less

  9. Extracellular enzymes facilitate electron uptake in biocorrosion and bioelectrosynthesis.

    PubMed

    Deutzmann, Jörg S; Sahin, Merve; Spormann, Alfred M

    2015-04-21

    Direct, mediator-free transfer of electrons between a microbial cell and a solid phase in its surrounding environment has been suggested to be a widespread and ecologically significant process. The high rates of microbial electron uptake observed during microbially influenced corrosion of iron [Fe(0)] and during microbial electrosynthesis have been considered support for a direct electron uptake in these microbial processes. However, the underlying molecular mechanisms of direct electron uptake are unknown. We investigated the electron uptake characteristics of the Fe(0)-corroding and electromethanogenic archaeon Methanococcus maripaludis and discovered that free, surface-associated redox enzymes, such as hydrogenases and presumably formate dehydrogenases, are sufficient to mediate an apparent direct electron uptake. In genetic and biochemical experiments, we showed that these enzymes, which are released from cells during routine culturing, catalyze the formation of H2 or formate when sorbed to an appropriate redox-active surface. These low-molecular-weight products are rapidly consumed by M. maripaludis cells when present, thereby preventing their accumulation to any appreciable or even detectable level. Rates of H2 and formate formation by cell-free spent culture medium were sufficient to explain the observed rates of methane formation from Fe(0) and cathode-derived electrons by wild-type M. maripaludis as well as by a mutant strain carrying deletions in all catabolic hydrogenases. Our data collectively show that cell-derived free enzymes can mimic direct extracellular electron transfer during Fe(0) corrosion and microbial electrosynthesis and may represent an ecologically important but so far overlooked mechanism in biological electron transfer. The intriguing trait of some microbial organisms to engage in direct electron transfer is thought to be widespread in nature. Consequently, direct uptake of electrons into microbial cells from solid surfaces is assumed to have a significant impact not only on fundamental microbial and biogeochemical processes but also on applied bioelectrochemical systems, such as microbial electrosynthesis and biocorrosion. This study provides a simple mechanistic explanation for frequently observed fast electron uptake kinetics in microbiological systems without a direct transfer: free, cell-derived enzymes can interact with cathodic surfaces and catalyze the formation of intermediates that are rapidly consumed by microbial cells. This electron transfer mechanism likely plays a significant role in various microbial electron transfer reactions in the environment. Copyright © 2015 Deutzmann et al.

  10. Consumers' Preferences for Electronic Nicotine Delivery System Product Features: A Structured Content Analysis.

    PubMed

    Kistler, Christine E; Crutchfield, Trisha M; Sutfin, Erin L; Ranney, Leah M; Berman, Micah L; Zarkin, Gary A; Goldstein, Adam O

    2017-06-07

    To inform potential governmental regulations, we aimed to develop a list of electronic nicotine delivery system (ENDS) product features important to U.S. consumers by age and gender. We employed qualitative data methods. Participants were eligible if they had used an ENDS at least once. Groups were selected by age and gender (young adult group aged 18-25, n = 11; middle-age group aged 26-64, n = 9; and women's group aged 26-64, n = 9). We conducted five individual older adult interviews (aged 68-80). Participants discussed important ENDS features. We conducted a structured content analysis of the group and interview responses. Of 34 participants, 68% were white and 56% were female. Participants mentioned 12 important ENDS features, including: (1) user experience; (2) social acceptability; (3) cost; (4) health risks/benefits; (5) ease of use; (6) flavors; (7) smoking cessation aid; (8) nicotine content; (9) modifiability; (10) ENDS regulation; (11) bridge between tobacco cigarettes; (12) collectability. The most frequently mentioned ENDS feature was modifiability for young adults, user experience for middle-age and older adults, and flavor for the women's group. This study identified multiple features important to ENDS consumers. Groups differed in how they viewed various features by age and gender. These results can inform ongoing regulatory efforts.

  11. Gold Nanomaterials in Consumer Cosmetics Nanoproducts: Analyses, Characterization, and Dermal Safety Assessment.

    PubMed

    Cao, Mingjing; Li, Jiayang; Tang, Jinglong; Chen, Chunying; Zhao, Yuliang

    2016-10-01

    Establishment of analytical methods of engineered nanomaterials in consumer products for their human and environmental risk assessment becomes urgent for both academic and industrial needs. Owing to the difficulties and challenges around nanomaterials in complex media, proper chemical separation and biological assays of nanomaterials from nanoproducts needs to be firstly developed. Herein, a facile and rapid method to separate and analyze gold nanomaterials in cosmetics is reported. Gold nanomaterials are successfully separated from different facial or eye creams and their physiochemical properties are analyzed by quantitative and qualitative state-of-the art techniques with high sensitivity or high spatial resolution. In turn, a protocol including quantification of gold by inductively coupled plasma mass spectrometry and thorough characterization of morphology, size distribution, and surface property by electron microscopes, atomic force microscope, and X-ray photoelectron spectroscope is developed. Subsequently, the preliminary toxicity assessment indicates that gold nanomaterials in cosmetic creams have no observable toxicity to human keratinocytes even after 24 h exposure up to a concentration of 200 μg mL -1 . The environmental scanning electron microscope reveals that gold nanomaterials are mostly attached on the cell membrane. Thus, the present study provides a full analysis protocol for toxicity assessment of gold nanomaterials in consumer products (cosmetic creams). © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Consumer Mobile Health Apps: Current State, Barriers, and Future Directions.

    PubMed

    Kao, Cheng-Kai; Liebovitz, David M

    2017-05-01

    This paper discusses the current state, barriers, and future directions of consumer-facing applications (apps). There are currently more than 165,000 mobile health apps publicly available in major app stores, the vast majority of which are designed for patients. The top 2 categories are wellness management and disease management apps, whereas other categories include self-diagnosis, medication reminder, and electronic patient portal apps. Apps specific to physical medicine and rehabilitation also are reviewed. These apps have the potential to provide low-cost, around-the-clock access to high-quality, evidence-based health information to end users on a global scale. However, they have not yet lived up to their potential due to multiple barriers, including lack of regulatory oversight, limited evidence-based literature, and concerns of privacy and security. The future directions may consist of improving data integration into the health care system, an interoperable app platform allowing access to electronic health record data, cloud-based personal health record across health care networks, and increasing app prescription by health care providers. For consumer mobile health apps to fully contribute value to health care delivery and chronic disease management, all stakeholders within the ecosystem must collaborate to overcome the significant barriers. Copyright © 2017 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.

  13. EPA ENERGY STAR: Tackling Growth in Home Electronics and Small Appliances

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sanchez, Marla Christine; Brown, Richard; Homan, Gregory

    2008-11-17

    Over a decade ago, the electricity consumption associated with home electronics and other small appliances emerged onto the global energy policy landscape as one of the fastest growing residential end uses with the opportunity to deliver significant energy savings. As our knowledge of this end use matures, it is essential to step back and evaluate the degree to which energy efficiency programs have successfully realized energy savings and where savings opportunities have been missed.For the past fifteen years, we have quantified energy, utility bill, and carbon savings for US EPA?s ENERGY STAR voluntary product labeling program. In this paper, wemore » present a unique look into the US residential program savings claimed to date for EPA?s ENERGY STAR office equipment, consumer electronics, and other small household appliances as well as EPA?s projected program savings over the next five years. We present a top-level discussion identifying program areas where EPA?s ENERGY STAR efforts have succeeded and program areas where ENERGY STAR efforts did not successfully address underlying market factors, technology issues and/or consumer behavior. We end by presenting the magnitude of ?overlooked? savings.« less

  14. E-waste management and sustainability: a case study in Brazil.

    PubMed

    Azevedo, Luís Peres; da Silva Araújo, Fernando Gabriel; Lagarinhos, Carlos Alberto Ferreira; Tenório, Jorge Alberto Soares; Espinosa, Denise Crocce Romano

    2017-11-01

    The advancement of technology and development of new electronic and electrical equipment with a reduced life cycle has increased the need for the disposal of them (called Waste of Electric and Electronic Equipment or simply e-waste) due to defects presented during use, replacement of obsolete equipment, and ease of acquisition of new equipment. There is a lack of consumer awareness regarding the use, handling storage, and disposal of this equipment. In Brazil, the disposal of post-consumer waste is regulated by the National Solid Waste Policy, established by Law No. 12305 and regulated on the 23rd December 2010. Under this legislation, manufacturers and importers are required to perform a project for the Reverse Logistics of e-waste, though its implementation is not well defined. This work focuses on the verification of the sustainability of reverse logistics suggested by the legislation and the mandatory points, evaluating its costs and the possible financial gain with recycling of the waste. The management of reverse logistics and recycling of waste electrical and electronic equipment, or simply recycling of e-waste, as suggested by the government, will be the responsibility of the managing organization to be formed by the manufacturers/importers in Brazil.

  15. Disassembly factories for electrical and electronic products to recover resources in product and material cycles.

    PubMed

    Basdere, Bahadir; Seliger, Guenther

    2003-12-01

    Cycle economy as a paradigm for industry in the 21st century depends on the economical and ecological treatment of limited resources. The objective is to achieve more use with fewer resources to increase the use-productivity of these resources. The European Union, aware of the adverse environmental impacts associated with electrical and electronic consumer goods in particular, has passed legislation regulating their appropriate end-of-life treatment. Adaptation processes, including essential disassembly and re-assembly operations, contribute significantly toward the economical fulfillment of these new legal requirements. Typically, the disassembly of used products is characterized by a high rate of manual operations, wide variety of product types, and unknown product properties. To cope with such demands, life cycle units or product accompanying information systems, are being developed and used for acquiring data about a specific product throughout its life cycle to aid in determining the level of product deterioration. Modular disassembly processes and tools have been developed and realized to enable the handling of multiple productvariants. They are being implemented in prototypical hybrid disassembly systemsfor large- and small-size electrical and electronic consumer goods.

  16. PHOTOCROSSLINKED IMMOBILIZATION OF POLYELECTROLYTES FOR TEMPLATE ASSISTED ENZYMATIC POLYMERIZATION OF CONJUGATED POLYMERS

    EPA Science Inventory

    Growing demand in consumer electronics raises need for efficient, affordable, environmentally benign and biodegradable substitutes for current technologies. Printed circuit boards contain heavy metals such as antimony, silver, chromium, zinc, lead, tin and copper. According t...

  17. Fool U.

    ERIC Educational Resources Information Center

    Finn, Chester E., Jr.

    2002-01-01

    Cautions that there are many potential problems related to higher education via the information superhighway, noting that while distance learning is a fast-growing and promising educational technology, consumers need to use common sense and be prepared to deal with new electronic scams and rip-offs. (SM)

  18. Measuring and Modeling Surface Sorption Dynamics of OPFRs in Stainless Steel Empty Chambers

    EPA Science Inventory

    Organophosphorus flame retardants (OPFRs) are produced and used widely as alternative additives in building materials and consumer products such as spray polyurethane foam (SPF), polyvinyl chloride flooring, electrical and electronic products, furniture, textile coatings, and pla...

  19. No Small Change: E-Commerce in Distance Education.

    ERIC Educational Resources Information Center

    Robinson, Evan T.

    2002-01-01

    Explains how electronic commerce (e-commerce) principles can be useful for distance education in higher education. Topics include business-to-business and business-to-consumer models; entering the marketplace; understanding the institution's capabilities; knowing the competition; and sound financial models. (LRW)

  20. Privacy Perspectives for Online Searchers: Confidentiality with Confidence?

    ERIC Educational Resources Information Center

    Duberman, Josh; Beaudet, Michael

    2000-01-01

    Presents issues and questions involved in online privacy from the information professional's perspective. Topics include consumer concerns; query confidentiality; securing computers from intrusion; electronic mail; search engines; patents and intellectual property searches; government's role; Internet service providers; database mining; user…

  1. Share of Energy Used by Appliances and Consumer Electronics Increases in U.S. Homes

    EIA Publications

    2011-01-01

    Over the past three decades, the share of residential electricity used by appliances and electronics in U.S. homes has nearly doubled from 17% to 3% , growing from 1.77 quadrillion Btu (quads) to 3.25 quads. This rise has occurred while federal energy efficiency standards were enacted on every major appliance, overall household energy consumption actually decreased from 10.58 quads to 10.55 quads, and energy use per household fell 31%.

  2. Correlated Raman micro-spectroscopy and scanning electron microscopy analyses of flame retardants in environmental samples: a micro-analytical tool for probing chemical composition, origin and spatial distribution.

    PubMed

    Ghosal, Sutapa; Wagner, Jeff

    2013-07-07

    We present correlated application of two micro-analytical techniques: scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS) and Raman micro-spectroscopy (RMS) for the non-invasive characterization and molecular identification of flame retardants (FRs) in environmental dusts and consumer products. The SEM/EDS-RMS technique offers correlated, morphological, molecular, spatial distribution and semi-quantitative elemental concentration information at the individual particle level with micrometer spatial resolution and minimal sample preparation. The presented methodology uses SEM/EDS analyses for rapid detection of particles containing FR specific elements as potential indicators of FR presence in a sample followed by correlated RMS analyses of the same particles for characterization of the FR sub-regions and surrounding matrices. The spatially resolved characterization enabled by this approach provides insights into the distributional heterogeneity as well as potential transfer and exposure mechanisms for FRs in the environment that is typically not available through traditional FR analysis. We have used this methodology to reveal a heterogeneous distribution of highly concentrated deca-BDE particles in environmental dust, sometimes in association with identifiable consumer materials. The observed coexistence of deca-BDE with consumer material in dust is strongly indicative of its release into the environment via weathering/abrasion of consumer products. Ingestion of such enriched FR particles in dust represents a potential for instantaneous exposure to high FR concentrations. Therefore, correlated SEM/RMS analysis offers a novel investigative tool for addressing an area of important environmental concern.

  3. Radial Head Subluxation Among Young Children in the United States Associated With Consumer Products and Recreational Activities.

    PubMed

    Welch, Rachel; Chounthirath, Thiphalak; Smith, Gary A

    2017-07-01

    This study investigated the epidemiology of children treated in US emergency departments for radial head subluxation (RHS) associated with consumer products and recreational activities using data from the National Electronic Injury Surveillance System. An estimated 430 766 (95% confidence interval: 341 194-520 339) children ≤5 years of age were treated for RHS in US emergency departments from 1990 to 2011. The mean patient age was 2.1 years, and 56.5% of patients were girls. The most common mechanism of injury was a fall (43.2%), followed by arm pull (39.4%). The annual rate of RHS increased significantly by 190.1% during the 22-year study period. This is the largest study of RHS to date and the first to use a nationally representative sample to investigate secular trends and mechanisms of injury for RHS associated with consumer products and recreational activities. Events associated with consumer products and recreational activities are an important increasing source of RHS.

  4. Development of the consumption behavior that promotes sustainable society: Focusing on recycling of small waste home appliances

    NASA Astrophysics Data System (ADS)

    Ichinose, Takae

    2015-04-01

    Hiroshima University High School (HUHS) became the first UNESCO Associated School in Japan in 1953, and since then it has practiced ESD in various educational activities in all ranges of education. As a teacher of home economics, I have focused on consumer affairs and encouraged my students to consider what each of them can do as an individual consumer in order to create a sustainable society. In Japan, several acts related to consumer affairs have been enforced in recent years. "Act on Promotion of Consumer Education" was enforced in December 2012, and construction of the "Consumer Citizen Society" was proposed. It places emphasis not only on environmental concerns but also on the initiative of consumers and its influence on social and economic trends. In addition, "Act on Promotion of Recycling of Small Waste Electrical and Electronic Equipment" was enforced in April, 2013. It aims at protecting living environment and healthy development of the national economy by appropriate treatment of waste materials and effective use of resources. For my lessons on "food, clothing and shelter in relation to consumption behavior and environmental problems", I took up "the recycling of small waste home appliances" as the teaching materials to raise awareness on resources recycling. The purpose of the lessons is three-fold: (1) to make students aware of environmental load; (2) to deepen the understanding of the influence which excessive consumption has on developing countries; (3) to encourage the students to think positively toward the solution of the problems. I am currently practicing the lessons, and I have shown below the summary of the instruction. Lesson 1: Give a quiz based on the database on environmental label from Ministry of the Environment website. Then show a film on whereabouts of the hi-tech industrial waste (e-waste). After the film, show some everyday products for which mineral resources are used in order to impress the idea of "urban mine". Lesson 2: Show a video site on "Act on Promotion of Recycling of Small Waste Electrical and Electronic Equipment" uploaded by the Ministry of the Environment. The video site is shown with reference to "Basel Convention" and "Waste Electrical and Electronic Equipment Directive", which have been already taught in social study class. After the video, tell the students what DOWA Holdings Co., Ltd. group has accomplished with its DOWA ecosystem as a frontrunner of the recycling of small waste home appliances, and make the students think about the responsibilities of consumers. Through these lessons, I expect my students to be aware of the influence of their consumption behavior and think over eco-friendly lifestyles and support for developing countries. Consideration for others, not only for people at present but for future generations, will surely cultivate willingness to contribute to sustainable development.

  5. Ocular Tolerance of Contemporary Electronic Display Devices.

    PubMed

    Clark, Andrew J; Yang, Paul; Khaderi, Khizer R; Moshfeghi, Andrew A

    2018-05-01

    Electronic displays have become an integral part of life in the developed world since the revolution of mobile computing a decade ago. With the release of multiple consumer-grade virtual reality (VR) and augmented reality (AR) products in the past 2 years utilizing head-mounted displays (HMDs), as well as the development of low-cost, smartphone-based HMDs, the ability to intimately interact with electronic screens is greater than ever. VR/AR HMDs also place the display at much closer ocular proximity than traditional electronic devices while also isolating the user from the ambient environment to create a "closed" system between the user's eyes and the display. Whether the increased interaction with these devices places the user's retina at higher risk of damage is currently unclear. Herein, the authors review the discovery of photochemical damage of the retina from visible light as well as summarize relevant clinical and preclinical data regarding the influence of modern display devices on retinal health. Multiple preclinical studies have been performed with modern light-emitting diode technology demonstrating damage to the retina at modest exposure levels, particularly from blue-light wavelengths. Unfortunately, high-quality in-human studies are lacking, and the small clinical investigations performed to date have failed to keep pace with the rapid evolutions in display technology. Clinical investigations assessing the effect of HMDs on human retinal function are also yet to be performed. From the available data, modern consumer electronic displays do not appear to pose any acute risk to vision with average use; however, future studies with well-defined clinical outcomes and illuminance metrics are needed to better understand the long-term risks of cumulative exposure to electronic displays in general and with "closed" VR/AR HMDs in particular. [Ophthalmic Surg Lasers Imaging Retina. 2018;49:346-354.]. Copyright 2018, SLACK Incorporated.

  6. Production of Methane During Anaerobic Degradation of Ethanol in Gasoline

    EPA Science Inventory

    Field and laboratory studies show that the natural biodegradation of benzene may be inhibited by the presence of ethanol. Preferential biodegradation of ethanol can consume electron acceptors such as sulfate, nitrate, or oxygen that are needed for BTEX biodegradation. An additi...

  7. Parameterizing A Surface Water Model for Multiwalled Carbon Nanotubes

    EPA Science Inventory

    The unique electronic, mechanical, and structural properties of carbon nanotubes (CNTs) has lead to increasing production of these versatile materials; currently, the use of carbon-based nanomaterials in consumer products is second only to that of nano-scale silver. Although ther...

  8. Migration of Organophorus Flame Retardants From Closed cell form to Settled Dust

    EPA Science Inventory

    Many industrial and consumer products, such as electrical and electronic products, furniture, plastics, textile, and building materials are manufactured with organophosphorus flame retardants (OPFRs). OPFRs can leach or diffuse out of the products and are released to the surround...

  9. The Information Superhighway: A Review of Some Determining Factors.

    ERIC Educational Resources Information Center

    Cawkell, Tony

    1997-01-01

    Examines consumer services delivered via the Internet. Discusses social and political factors (regulation, commercial alliances, copyright), specific applications (home banking and shopping, distance education, electronic mail, games, telecommuting), and constraints of data transmission. Since many applications are based on videoconferencing,…

  10. Migration of Organophosphate Flame Retardants from Closed Cell Foam to Settled Dust

    EPA Science Inventory

    Many industrial and consumer products, such as electrical and electronic products, furniture, plastics, textile, and building materials are manufactured with organophosphorus flame retardants (OPFRs). OPFRs can leach or diffuse out of the products and are released to the surround...

  11. 16 CFR 314.2 - Definitions.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Commission's rule governing the Privacy of Consumer Financial Information, 16 CFR part 313. (b) Customer... customer of a financial institution, whether in paper, electronic, or other form, that is handled or... administrative, technical, or physical safeguards you use to access, collect, distribute, process, protect, store...

  12. Metabolomic Analysis of Liver Cells Exposed to Carbon Nanotubes and Graphene Oxide

    EPA Science Inventory

    Carbon nanotubes (CNTs) and other graphenic nanomaterials are being used extensively in industrial, consumer, and mechanical applications based in part on their unique structural, optical and electronic properties. Due to the widespread use of these nanoparticles (NPs), human and...

  13. Whole Foods Market Group, Inc. Nationwide RCRA Administrative Settlement

    EPA Pesticide Factsheets

    The U.S. Environmental Protection Agency (EPA) today announced an agreement with the grocery chain Whole Foods Market Group, Inc., to implement a state-of-the-art electronic system at its stores throughout the U.S. for identifying and classifying consumer

  14. Two-Year Operational Evaluation Of A Consumer Electronics-Based Data Acquisition System For Equipment Monitoring

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Van Hoy, Blake W.; Phillips, Larry D.; Wetherington Jr, G Randall

    Oak Ridge National Laboratory (ORNL) has performed a two-year evaluation of the performance of an in-house developed consumer electronics-based data acquisition system (DAS). The main advantage of this approach compared to conventional instrumentation grade systems is cost; instrument grade data acquisition systems average costs range from $800 to $2,000 per channel compared to a range of $200 - $400 per channel for a consumer electronics-based system. The DAS is operated as a full-time in-situ vibration monitor. The resulting data stream is streamed over the ORNL network, at an aggregate rate of approximately 2 megabytes/s, to a Linux server. The servermore » includes the capability to implement event-triggered data stores, as well as real-time files for the implementation of continuous display monitoring of the spectra. Detailed spectral analysis is performed post event. The DAS is installed on a large industrial chiller and cooling water pump associated with ORNL’s Titan supercomputer. These mechanical systems include rotating components that operate at fundamental frequencies within the range of 30 Hz to over 3 KHz. Evaluation of the DAS data over a two-year operating period leads to the conclusion that for many industrial processes this system could form the basis for a cost effective means of obtaining operating health data in real time from rotating machinery. The deployment has also shown that the DAS technology is reliable. Furthermore, because the cost of the DAS is low, the other significant advantage of this approach is that the DAS can be deployed in a dedicated manner and operated on a full-time basis.« less

  15. Projection display technologies for the new millennium

    NASA Astrophysics Data System (ADS)

    Kahn, Frederic J.

    2000-04-01

    Although analog CRTs continue to enable most of the world's electronic projection displays such as US consumer rear projection televisions, discrete pixel (digital) active matrix LCD and DLP reflective mirror array projectors have rapidly created large nonconsumer markets--primarily for business. Recent advances in image quality, compactness and cost effectiveness of digital projectors have the potential to revolutionize major consumer and entertainment markets as well. Digital penetration of the mainstream consumer projection TV market will begin in the hear 2000. By 2005 digital projection HDTVs could take the major share of the consumer HDTV projection market. Digital projection is expected to dominate both the consumer HDTV and the cinema market by 2010, resulting in potential shipments for all projection markets exceeding 10 M units per year. Digital projection is improving at a rate 10X faster than analog CRT projectors and 5X faster than PDP flat panels. Continued rapid improvement of digital projection is expected due to its relative immaturity and due to the wide diversity of technological improvements being pursued. Key technology enablers are the imaging panels, light sources and micro-optics. Market shares of single panel projectors, MEMs panels, LCOS panels and low T p-Si TFT LCD panel variants are expected to increase.

  16. Consumer-mediated health information exchanges: the 2012 ACMI debate.

    PubMed

    Cimino, James J; Frisse, Mark E; Halamka, John; Sweeney, Latanya; Yasnoff, William

    2014-04-01

    The American College of Medical Informatics (ACMI) sponsors periodic debates during the American Medical Informatics Fall Symposium to highlight important informatics issues of broad interest. In 2012, a panel debated the following topic: "Resolved: Health Information Exchange Organizations Should Shift Their Principal Focus to Consumer-Mediated Exchange in Order to Facilitate the Rapid Development of Effective, Scalable, and Sustainable Health Information Infrastructure." Those supporting the proposition emphasized the need for consumer-controlled community repositories of electronic health records (health record banks) to address privacy, stakeholder cooperation, scalability, and sustainability. Those opposing the proposition emphasized that the current healthcare environment is so complex that development of consumer control will take time and that even then, consumers may not be able to mediate their information effectively. While privately each discussant recognizes that there are many sides to this complex issue, each followed the debater's tradition of taking an extreme position in order emphasize some of the polarizing aspects in the short time allotted them. In preparing this summary, we sought to convey the substance and spirit of the debate in printed form. Transcripts of the actual debate were edited for clarity, and appropriate supporting citations were added for the further edification of the reader. Published by Elsevier Inc.

  17. e-Biologics: Fabrication of Sustainable Electronics with "Green" Biological Materials.

    PubMed

    Lovley, Derek R

    2017-06-27

    The growing ubiquity of electronic devices is increasingly consuming substantial energy and rare resources for materials fabrication, as well as creating expansive volumes of toxic waste. This is not sustainable. Electronic biological materials (e-biologics) that are produced with microbes, or designed with microbial components as the guide for synthesis, are a potential green solution. Some e-biologics can be fabricated from renewable feedstocks with relatively low energy inputs, often while avoiding the harsh chemicals used for synthesizing more traditional electronic materials. Several are completely free of toxic components, can be readily recycled, and offer unique features not found in traditional electronic materials in terms of size, performance, and opportunities for diverse functionalization. An appropriate investment in the concerted multidisciplinary collaborative research required to identify and characterize e-biologics and to engineer materials and devices based on e-biologics could be rewarded with a new "green age" of sustainable electronic materials and devices. Copyright © 2017 Lovley.

  18. Brightness analysis of an electron beam with a complex profile

    NASA Astrophysics Data System (ADS)

    Maesaka, Hirokazu; Hara, Toru; Togawa, Kazuaki; Inagaki, Takahiro; Tanaka, Hitoshi

    2018-05-01

    We propose a novel analysis method to obtain the core bright part of an electron beam with a complex phase-space profile. This method is beneficial to evaluate the performance of simulation data of a linear accelerator (linac), such as an x-ray free electron laser (XFEL) machine, since the phase-space distribution of a linac electron beam is not simple, compared to a Gaussian beam in a synchrotron. In this analysis, the brightness of undulator radiation is calculated and the core of an electron beam is determined by maximizing the brightness. We successfully extracted core electrons from a complex beam profile of XFEL simulation data, which was not expressed by a set of slice parameters. FEL simulations showed that the FEL intensity was well remained even after extracting the core part. Consequently, the FEL performance can be estimated by this analysis without time-consuming FEL simulations.

  19. Classification of human pathogen bacteria for early screening using electronic nose

    NASA Astrophysics Data System (ADS)

    Zulkifli, Syahida Amani; Mohamad, Che Wan Syarifah Robiah; Abdullah, Abu Hassan

    2017-10-01

    This paper present human pathogen bacteria for early screening using electronic nose. Electronic nose (E-nose) known as gas sensor array is a device that analyze the odor measurement give the fast response and less time consuming for clinical diagnosis. Many bacterial pathogens could lead to life threatening infections. Accurate and rapid diagnosis is crucial for the successful management of these infections disease. The conventional method need more time to detect the growth of bacterial. Alternatively, the bacteria are Pseudomonas aeruginosa and Shigella cultured on different media agar can be detected and classifies according to the volatile compound in shorter time using electronic nose (E-nose). Then, the data from electronic nose (E-nose) is processed using statistical method which is principal component analysis (PCA). The study shows the capability of electronic nose (E-nose) for early screening for bacterial infection in human stomach.

  20. The Application of Wearable Technology in Surgery: Ensuring the Positive Impact of the Wearable Revolution on Surgical Patients

    PubMed Central

    Slade Shantz, Jesse Alan; Veillette, Christian J. H.

    2014-01-01

    Wearable technology has become an important trend in consumer electronics in the past year. The miniaturization and mass production of myriad sensors have made possible the integration of sensors and output devices in wearable platforms. Despite the consumer focus of the wearable revolution some surgical applications are being developed. These fall into augmentative, assistive, and assessment functions and primarily layer onto current surgical workflows. Some challenges to the adoption of wearable technologies are discussed and a conceptual framework for understanding the potential of wearable technology to revolutionize surgical practice are presented. PMID:25593963

  1. Case study: a health check-up for the corporate IT department.

    PubMed

    Clark, Frank; Kimmerly, William

    2004-01-01

    As advances such as the electronic charting, closed-loop medication safety, physician order entry, consumer portals, electronic collaboration, and wireless access become the norm, central IS organizations are finding it difficult to keep pace. This challenge is exacerbated by declining margins, severe cost pressures, increased regulation, and added public scrutiny. Is your centralized IS organization healthy enough to meet the challenges presented by today's complex, demanding, dynamic healthcare delivery environments? How do you know? What factors do you consider?

  2. The hospital library online--a point of service for consumers and hospital staff: a case study.

    PubMed Central

    Cain, N J; Fuller, H J

    1999-01-01

    The Health Library at Stanford University is described in the context of electronic information services provided to Stanford University Medical Center, the local community, and Internet users in general. The evolution from CD-ROM-based services to Web-based services and in-library services to networked resources are described. Electronic services have expanded the mission of The Health Library to include national and international users and the provision of unique services and collections. PMID:10427424

  3. Fixation methods for electron microscopy of human and other liver

    PubMed Central

    Wisse, Eddie; Braet, Filip; Duimel, Hans; Vreuls, Celien; Koek, Ger; Olde Damink, Steven WM; van den Broek, Maartje AJ; De Geest, Bart; Dejong, Cees HC; Tateno, Chise; Frederik, Peter

    2010-01-01

    For an electron microscopic study of the liver, expertise and complicated, time-consuming processing of hepatic tissues and cells is needed. The interpretation of electron microscopy (EM) images requires knowledge of the liver fine structure and experience with the numerous artifacts in fixation, embedding, sectioning, contrast staining and microscopic imaging. Hence, the aim of this paper is to present a detailed summary of different methods for the preparation of hepatic cells and tissue, for the purpose of preserving long-standing expertise and to encourage new investigators and clinicians to include EM studies of liver cells and tissue in their projects. PMID:20556830

  4. How Consumers and Physicians View New Medical Technology: Comparative Survey

    PubMed Central

    Boeldt, Debra L; Wineinger, Nathan E; Waalen, Jill; Gollamudi, Shreya; Grossberg, Adam; Steinhubl, Steven R; McCollister-Slipp, Anna; Rogers, Marc A; Silvers, Carey

    2015-01-01

    Background As a result of the digital revolution coming to medicine, a number of new tools are becoming available and are starting to be introduced in clinical practice. Objective We aim to assess health care professional and consumer attitudes toward new medical technology including smartphones, genetic testing, privacy, and patient-accessible electronic health records. Methods We performed a survey with 1406 health care providers and 1102 consumer responders. Results Consumers who completed the survey were more likely to prefer new technologies for a medical diagnosis (437/1102, 39.66%) compared with providers (194/1406, 13.80%; P<.001), with more providers (393/1406, 27.95%) than consumers (175/1102, 15.88%) reporting feeling uneasy about using technology for a diagnosis. Both providers and consumers supported genetic testing for various purposes, with providers (1234/1406, 87.77%) being significantly more likely than consumers (806/1102, 73.14%) to support genetic testing when planning to have a baby (P<.001). Similarly, 91.68% (1289/1406) of providers and 81.22% (895/1102) of consumers supported diagnosing problems in a fetus (P<.001). Among providers, 90.33% (1270/1406) were concerned that patients would experience anxiety after accessing health records, and 81.95% (1149/1406) felt it would lead to requests for unnecessary medical evaluations, but only 34.30% (378/1102; P<.001) and 24.59% (271/1102; P<.001) of consumers expressed the same concerns, respectively. Physicians (137/827, 16.6%) reported less concern about the use of technology for diagnosis compared to medical students (21/235, 8.9%; P=.03) and also more frequently felt that patients owned their medical record (323/827, 39.1%; and 30/235, 12.8%, respectively; P<.001). Conclusions Consumers and health professionals differ significantly and broadly in their views of emerging medical technology, with more enthusiasm and support expressed by consumers. PMID:26369254

  5. Revisiting the Fully Automated Double-Ring Infiltrometer Using Open-Source Electronics

    EPA Science Inventory

    The double-ring infiltrometer (DRI) is commonly used for measuring soil hydraulic conductivity. However, constant-head DRI tests typically involve the use of Mariotte tubes, which can be problematic to set-up, and time-consuming to maintain and monitor during infiltration tests....

  6. 16 CFR § 1500.88 - Exemptions from lead limits under section 101 of the Consumer Product Safety Improvement Act for...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    .... (9) Lead oxide in the glass envelope of Black Light Blue (BLB) lamps. (e) Components of electronic devices that are removable or replaceable, such as battery packs and light bulbs that are inaccessible...

  7. 16 CFR 1500.88 - Exemptions from lead limits under section 101 of the Consumer Product Safety Improvement Act for...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    .... (9) Lead oxide in the glass envelope of Black Light Blue (BLB) lamps. (e) Components of electronic devices that are removable or replaceable, such as battery packs and light bulbs that are inaccessible...

  8. 16 CFR 1500.88 - Exemptions from lead limits under section 101 of the Consumer Product Safety Improvement Act for...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    .... (9) Lead oxide in the glass envelope of Black Light Blue (BLB) lamps. (e) Components of electronic devices that are removable or replaceable, such as battery packs and light bulbs that are inaccessible...

  9. 16 CFR 1500.88 - Exemptions from lead limits under section 101 of the Consumer Product Safety Improvement Act for...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    .... (9) Lead oxide in the glass envelope of Black Light Blue (BLB) lamps. (e) Components of electronic devices that are removable or replaceable, such as battery packs and light bulbs that are inaccessible...

  10. The Internet in the Workplace: Issues of Implementation and Impact.

    ERIC Educational Resources Information Center

    Anderson, Byron

    1996-01-01

    As the Internet (with pluses and minuses) creeps forward, many work environments, business practices, and consumer processes will change significantly. Manufacturing, electronic commerce, health care, education, environmental monitoring, libraries, and government services will be profoundly affected. Fully implementing the Internet will take…

  11. Acute and Developmental Behavioral Effects of Flame Retardants and Related Chemicals in Zebrafish

    EPA Science Inventory

    As polybrominated diphenyl ethers are phased out, numerous compounds are emerging as potential replacement flame retardants for use in consumer and electronic products. Little is known, however, about the neurobehavioral toxicity of these replacements. This study evaluated the ne...

  12. Argonne Collaborative Center for Energy Storage Science (ACCESS)

    Science.gov Websites

    Analysis and Diagnostics Laboratory (EADL) Post- Test Facility Access Proven Capabilities Argonne has Analysis, Modeling and Prototyping (CAMP) Electrochemical Analysis and Diagnostics Laboratory (EADL) Post -Test Facility Argonne User Facilities Industries Transportation Consumer Electronics Defense Electric

  13. Business Applications of WAP.

    ERIC Educational Resources Information Center

    van Steenderen, Margaret

    2002-01-01

    Explains the development of WAP (wireless application protocol), how it works, and what the major advantages and disadvantages are, especially when applied to the use of information. Topics include standardization; mobile communications; the effect of WAP on business tools, electronic commerce, and information services; consumers; corporate users;…

  14. An inexpensive open-source ultrasonic sensing system for monitoring fluid levels

    USDA-ARS?s Scientific Manuscript database

    Fluid levels are measured in a variety of agricultural applications, and are often measured manually, which can be time-consuming and labor-intensive. Rapid advances in electronic technologies have made a variety of inexpensive sensing, monitoring, and control capabilities available. A monitoring ...

  15. 78 FR 4848 - Social Media: Consumer Compliance Risk Management Guidance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-23

    ... third- party service provider relationships in connection with social media; An employee training... managing compliance, and training for appropriate personnel. These controls should apply to all customers, products and services, including customers engaging in electronic banking (e-banking) through the use of...

  16. Biomarker analysis of liver cells exposed to surfactant-wrapped and oxidized multi-walled carbon nanotubes (MWCNTs)

    EPA Science Inventory

    Carbon nanotubes (CNTs) have great potential in industrial, consumer, and mechanical applications, based partly on their unique structural, optical and electronic properties. CNTs are commonly oxidized or treated with surfactants to facilitate aqueous solution processing, and the...

  17. 12 CFR 1005.30 - Remittance transfer definitions.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 8 2014-01-01 2014-01-01 false Remittance transfer definitions. 1005.30 Section 1005.30 Banks and Banking BUREAU OF CONSUMER FINANCIAL PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E) Requirements for Remittance Transfers § 1005.30 Remittance transfer definitions. Except as...

  18. 12 CFR 1005.30 - Remittance transfer definitions.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 8 2013-01-01 2013-01-01 false Remittance transfer definitions. 1005.30 Section 1005.30 Banks and Banking BUREAU OF CONSUMER FINANCIAL PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E) Requirements for Remittance Transfers § 1005.30 Remittance transfer definitions. For purposes...

  19. Protecting the Voc Ed Consumer.

    ERIC Educational Resources Information Center

    Wilms, Wellford W.

    To test the differences in effect of postsecondary vocational training offered by public schools and by proprietary schools, a study based on a sample of 4,8000 students and graduates in the accounting, programing, electronic technician training, dental assisting, secretarial, and cosmetology occupations was designed. Even though vocational…

  20. "Control-alt-delete": rebooting solutions for the E-waste problem.

    PubMed

    Li, Jinhui; Zeng, Xianlai; Chen, Mengjun; Ogunseitan, Oladele A; Stevels, Ab

    2015-06-16

    A number of efforts have been launched to solve the global electronic waste (e-waste) problem. The efficiency of e-waste recycling is subject to variable national legislation, technical capacity, consumer participation, and even detoxification. E-waste management activities result in procedural irregularities and risk disparities across national boundaries. We review these variables to reveal opportunities for research and policy to reduce the risks from accumulating e-waste and ineffective recycling. Full regulation and consumer participation should be controlled and reinforced to improve local e-waste system. Aiming at standardizing best practice, we alter and identify modular recycling process and infrastructure in eco-industrial parks that will be expectantly effective in countries and regions to handle the similar e-waste stream. Toxicity can be deleted through material substitution and detoxification during the life cycle of electronics. Based on the idea of "Control-Alt-Delete", four patterns of the way forward for global e-waste recycling are proposed to meet a variety of local situations.

  1. Addressing the vulnerabilities of pass-thoughts

    NASA Astrophysics Data System (ADS)

    Fernandez, Gabriel C.; Danko, Amanda S.

    2016-05-01

    As biometrics become increasingly pervasive, consumer electronics are reaping the benefits of improved authentication methods. Leveraging the physical characteristics of a user reduces the burden of setting and remembering complex passwords, while enabling stronger security. Multi-factor systems lend further credence to this model, increasing security via multiple passive data points. In recent years, brainwaves have been shown to be another feasible source for biometric authentication. Physically unique to an individual in certain circumstances, the signals can also be changed by the user at will, making them more robust than static physical characteristics. No paradigm is impervious however, and even well-established medical technologies have deficiencies. In this work, a system for biometric authentication via brainwaves is constructed with electroencephalography (EEG). The efficacy of EEG biometrics via existing consumer electronics is evaluated, and vulnerabilities of such a system are enumerated. Impersonation attacks are performed to expose the extent to which the system is vulnerable. Finally, a multimodal system combining EEG with additional factors is recommended and outlined.

  2. Adaptive sigmoid function bihistogram equalization for image contrast enhancement

    NASA Astrophysics Data System (ADS)

    Arriaga-Garcia, Edgar F.; Sanchez-Yanez, Raul E.; Ruiz-Pinales, Jose; Garcia-Hernandez, Ma. de Guadalupe

    2015-09-01

    Contrast enhancement plays a key role in a wide range of applications including consumer electronic applications, such as video surveillance, digital cameras, and televisions. The main goal of contrast enhancement is to increase the quality of images. However, most state-of-the-art methods induce different types of distortion such as intensity shift, wash-out, noise, intensity burn-out, and intensity saturation. In addition, in consumer electronics, simple and fast methods are required in order to be implemented in real time. A bihistogram equalization method based on adaptive sigmoid functions is proposed. It consists of splitting the image histogram into two parts that are equalized independently by using adaptive sigmoid functions. In order to preserve the mean brightness of the input image, the parameter of the sigmoid functions is chosen to minimize the absolute mean brightness metric. Experiments on the Berkeley database have shown that the proposed method improves the quality of images and preserves their mean brightness. An application to improve the colorfulness of images is also presented.

  3. Consumer acceptance of and willingness to pay for food nanotechnology: a systematic review

    NASA Astrophysics Data System (ADS)

    Giles, Emma L.; Kuznesof, Sharron; Clark, Beth; Hubbard, Carmen; Frewer, Lynn J.

    2015-12-01

    Consumer's attitudes to, and acceptance of, emerging technologies and their applications, are important determinants of their successful implementation and commercialisation. Understanding the range of socio-psychological, cultural and affective factors which may influence consumer responses to applications of nanotechnology will help "fine-tune" the development of consumer products in line with their expectations and preferences. This is particularly true of applications in the food area, where consumer concerns about technologies applied to food production may be elevated. This research applied systematic review methodology to synthesise current knowledge regarding societal acceptance or rejection of nanotechnology applied to agri-food production. The objective was to aggregate knowledge derived from different research areas to gain an overall picture of consumer responses to nanotechnology applied to food production. Relevant electronic databases of peer-reviewed literature were searched from the earliest date available, for peer-reviewed papers which reported primary empirical data on consumer and expert acceptance of agri-food nanotechnology, using a formal systematic review protocol. Inclusion criteria for papers to be included in the review were: empirical peer-reviewed papers written in English; a population sample of adults aged 18 years and over used in the research; a research focus on consumer and expert acceptance of agri-food nanotechnology; and research on attitudes towards, and willingness to pay for, different applications of agri-food nanotechnology. Two researchers independently appraised the papers using NVivo 10 QSR software. Studies examining consumer and expert acceptance were thematically analysed, and key information was collated. The results were synthesised in order to identify trends in information relevant to consumer acceptance of nanotechnology applied to food production. Eight key themes were identified from the 32 papers which were extracted from the literature. These themes were applied to understand the determinants of consumer acceptance of agri-food nanotechnology. Nanotechnology is more likely to be accepted by consumers when applied to development of novel packaging with distinct benefits rather than when integrated directly into agri-food products. Trust and confidence in agri-food nanotechnology and its governance need to be fostered through transparent regulation and development of societally beneficial impacts to increase consumer acceptance.

  4. Consumer acceptance of and willingness to pay for food nanotechnology: a systematic review.

    PubMed

    Giles, Emma L; Kuznesof, Sharron; Clark, Beth; Hubbard, Carmen; Frewer, Lynn J

    Consumer's attitudes to, and acceptance of, emerging technologies and their applications, are important determinants of their successful implementation and commercialisation. Understanding the range of socio-psychological, cultural and affective factors which may influence consumer responses to applications of nanotechnology will help "fine-tune" the development of consumer products in line with their expectations and preferences. This is particularly true of applications in the food area, where consumer concerns about technologies applied to food production may be elevated. This research applied systematic review methodology to synthesise current knowledge regarding societal acceptance or rejection of nanotechnology applied to agri-food production. The objective was to aggregate knowledge derived from different research areas to gain an overall picture of consumer responses to nanotechnology applied to food production. Relevant electronic databases of peer-reviewed literature were searched from the earliest date available, for peer-reviewed papers which reported primary empirical data on consumer and expert acceptance of agri-food nanotechnology, using a formal systematic review protocol. Inclusion criteria for papers to be included in the review were: empirical peer-reviewed papers written in English; a population sample of adults aged 18 years and over used in the research; a research focus on consumer and expert acceptance of agri-food nanotechnology; and research on attitudes towards, and willingness to pay for, different applications of agri-food nanotechnology. Two researchers independently appraised the papers using NVivo 10 QSR software. Studies examining consumer and expert acceptance were thematically analysed, and key information was collated. The results were synthesised in order to identify trends in information relevant to consumer acceptance of nanotechnology applied to food production. Eight key themes were identified from the 32 papers which were extracted from the literature. These themes were applied to understand the determinants of consumer acceptance of agri-food nanotechnology. Nanotechnology is more likely to be accepted by consumers when applied to development of novel packaging with distinct benefits rather than when integrated directly into agri-food products. Trust and confidence in agri-food nanotechnology and its governance need to be fostered through transparent regulation and development of societally beneficial impacts to increase consumer acceptance.

  5. Application of Multipurpose Cadastre to Evaluate Energy Security of Land Parcel (Case Study: Gedung A and Gedung B, Institut Teknologi Sumatra)

    NASA Astrophysics Data System (ADS)

    Alif, S. M.; Nugroho, A. P.; Leksono, B. E.

    2018-03-01

    Energy security has one of its dimensions: Short-term energy security which focuses on the ability of the energy system to react promptly to sudden changes within the supply-demand balance. Non-energy components (such as land parcel) that comprise an energy system are analysed comprehensively with other component to measure energy security related to energy supply. Multipurpose cadastre which is an integrated land information system containing legal, physical, and cultural is used to evaluate energy (electrical energy) security of land parcel. The fundamental component of multipurpose cadastre used to evaluate energy security is attribute data which is the value of land parcel facilities. Other fundamental components (geographic control data, base map data, cadastral data) are used as position information and provide weight in room (part of land parcel) valuation. High value-room means the room is comfortable and/or used productively by its occupant. The method of valuation is by comparing one facility to other facilities. Facilities included in room valuation are relatively static items (such as chair, desk, and cabinet) except lamps and other electronic devices. The room value and number of electronic devices which consume electrical energy are correlated with each other. Consumption of electrical energy of electronic devices in the room with average value remains constant while consumption in other room needs to be evaluated to save the energy. The result of this research shows that room value correlate weakly with number of electronic device in corresponding room. It shows excess energy consumed in low-value room. Although numbers of electronic devices do not always mean the consumption of electrical energy and there are plenty electronic devices, it is recommended for occupant to be careful in utilizing electronic devices in low-value room to minimize energy consumption.

  6. A Peer-Led Electronic Mental Health Recovery App in an Adult Mental Health Service: Study Protocol for a Pilot Trial.

    PubMed

    Gulliver, Amelia; Banfield, Michelle; Reynolds, Julia; Miller, Sarah; Galati, Connie; Morse, Alyssa R

    2017-12-07

    There is growing demand for peer workers (people who use their own lived experience to support others in their recovery) to work alongside consumers to improve outcomes and recovery. Augmenting the workforce with peer workers has strong capacity to enhance mental health and recovery outcomes and make a positive contribution to the workforce within mental health systems and to the peer workers themselves. Technology-based applications are highly engaging and desirable methods of service delivery. This project is an exploratory proof-of-concept study, which aims to determine if a peer worker-led electronic mental (e-mental) health recovery program is a feasible, acceptable, and effective adjunct to usual treatment for people with moderate to severe mental illness. The study design comprises a recovery app intervention delivered by a peer worker to individual consumers at an adult mental health service. Evaluation measures will be conducted at post-intervention. To further inform the acceptability and feasibility of the model, consumers will be invited to participate in a focus group to discuss the program. The peer worker, peer supervisor, and key staff at the mental health service will also be individually interviewed to further evaluate the feasibility of the program within the health service and further inform its future development. The program will be delivered over a period of approximately 4 months, commencing June 2017. If the peer worker-led recovery app is found to be feasible, acceptable, and effective, it could be used to improve recovery in mental health service consumers. ©Amelia Gulliver, Michelle Banfield, Julia Reynolds, Sarah Miller, Connie Galati, Alyssa R Morse. Originally published in JMIR Research Protocols (http://www.researchprotocols.org), 07.12.2017.

  7. Generalist health professional's interactions with consumers who have a mental illness in nonmental health settings: A systematic review of the qualitative research.

    PubMed

    Brunero, Scott; Ramjan, Lucie M; Salamonson, Yenna; Nicholls, Daniel

    2018-05-10

    Generalist health professionals (GHPs) or those healthcare professionals working in nonmental health facilities are increasingly being required to provide care to consumers with a mental illness. The review aimed to synthesize the qualitative research evidence on the meanings and interpretations made by GHPs (nonmental health professional) who interact with consumers with mental illness in nonmental health settings. A systematic review of the qualitative literature was undertaken for the years 1994-2016. The following electronic databases were searched: CINAHL, MEDLINE, PsycINFO, and Sociological Abstracts. Using narrative synthesis methods, the following themes were identified: mental health knowledge (the GHPs' knowledge level about mental illness and how this impacts their experiences and perceptions); GHPs perceive mental illness as a safety risk (GHPs concern over harm to the consumer and themselves); organizational support (the system response from the environmental design, and expert support and care); and emotional consequences of care (the feelings expressed by GHPs based on their experiences and perceptions of consumers). The results suggest that GHPs provide care in a setting which consists of multiple understandings of what care means. Efforts beyond educational initiatives such as organizational and system-level changes will need to be implemented if we are to progress care for this consumer group. © 2018 Australian College of Mental Health Nurses Inc.

  8. Electronic health record use among cancer patients: Insights from the Health Information National Trends Survey.

    PubMed

    Strekalova, Yulia A

    2017-04-01

    Over 90% of US hospitals provide patients with access to e-copy of their health records, but the utilization of electronic health records by the US consumers remains low. Guided by the comprehensive information-seeking model, this study used data from the National Cancer Institute's Health Information National Trends Survey 4 (Cycle 4) and examined the factors that explain the level of electronic health record use by cancer patients. Consistent with the model, individual information-seeking factors and perceptions of security and utility were associated with the frequency of electronic health record access. Specifically, higher income, prior online information seeking, interest in accessing health information online, and normative beliefs were predictive of electronic health record access. Conversely, poorer general health status and lack of health care provider encouragement to use electronic health records were associated with lower utilization rates. The current findings provide theory-based evidence that contributes to the understanding of the explanatory factors of electronic health record use and suggest future directions for research and practice.

  9. Enriching the Catalog

    ERIC Educational Resources Information Center

    Tennant, Roy

    2004-01-01

    After decades of costly and time-consuming effort, nearly all libraries have completed the retrospective conversion of their card catalogs to electronic form. However, bibliographic systems still are really not much more than card catalogs on wheels. Enriched content that Amazon.com takes for granted--such as digitized tables of contents, cover…

  10. Basic Business and Economics: Understanding the Uses of the Universal Product Code

    ERIC Educational Resources Information Center

    Blockhus, Wanda

    1977-01-01

    Describes the Universal Product Code (UPC), the two-part food labeling and packaging code which is both human- and electronic scanner-readable. Discusses how it affects both consumer and business, and suggests how to teach the UPC code to business education students. (HD)

  11. Buy Me! Buy Me! Fourth Annual Report on Commercialism in Schools.

    ERIC Educational Resources Information Center

    Molnar, Alex; Reaves, Joseph A.

    2001-01-01

    The two students who won commercial sponsorship for their college education embody entrepreneurialism's darker side-the growing commercialism of schools and conscious targeting of students as lifelong consumers. This update discusses developments in program, activity, and materials sponsorships; exclusive agreements; electronic marketing;…

  12. Smart Fabrics Technology Development

    NASA Technical Reports Server (NTRS)

    Simon, Cory; Potter, Elliott; Potter, Elliott; McCabe, Mary; Baggerman, Clint

    2010-01-01

    Advances in Smart Fabrics technology are enabling an exciting array of new applications for NASA exploration missions, the biomedical community, and consumer electronics. This report summarizes the findings of a brief investigation into the state of the art and potential applications of smart fabrics to address challenges in human spaceflight.

  13. The National Information Infrastructure: Agenda for Action.

    ERIC Educational Resources Information Center

    Department of Commerce, Washington, DC. Information Infrastructure Task Force.

    The National Information Infrastructure (NII) is planned as a web of communications networks, computers, databases, and consumer electronics that will put vast amounts of information at the users' fingertips. Private sector firms are beginning to develop this infrastructure, but essential roles remain for the Federal Government. The National…

  14. 75 FR 31665 - Electronic Fund Transfers

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-04

    ...-In Requirement 17(b)(1), 17(b)(4)--General Rule and Scope of Opt-In; Notice and Opt-In Requirements... consumers should retain the responsibility to balance their checking accounts. For example, an institution....17(b)(1) contains a general prohibition on charging overdraft fees unless certain requirements are...

  15. ALA Guide to Medical & Health Sciences Reference

    ERIC Educational Resources Information Center

    ALA Editions, 2011

    2011-01-01

    This resource provides an annotated list of print and electronic biomedical and health-related reference sources, including Internet resources and digital image collections. Readers will find relevant research, clinical, and consumer health information resources. The emphasis is on resources within the United States, with a few representative…

  16. Voice Enabled Framework to Support Post-Surgical Discharge Monitoring

    PubMed Central

    Blansit, Kevin; Marmor, Rebecca; Zhao, Beiqun; Tien, Dan

    2017-01-01

    Unplanned surgical readmissions pose a challenging problem for the American healthcare system. We propose to combine consumer electronic voice recognition technology with the FHIR standard to create a post-surgical discharge monitoring app to identify and alert physicians to a patient’s deteriorating status. PMID:29854267

  17. 77 FR 18794 - Proposed Collection; Comment Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-28

    ... number CFPB- 2012-0011, by any of the following methods: Electronic: http://www.regulations.gov . Follow... consumers to make better informed decisions.'' The Dodd-Frank Act also directs the Bureau to research... services available to them. The Bureau will also use this information collection to test methods for...

  18. The E-business Revolution and Human Performance.

    ERIC Educational Resources Information Center

    Harmon, Paul

    2001-01-01

    Provides an overview of the electronic business (e-business) revolution and suggests ways it will affect human performance improvement professionals. Highlights include customer reliance on the Web; use of the Internet and associated software to link employees, applications, and companies; information access and sharing; business-to-consumer and…

  19. Reversing Sports-Related Iron and Zinc Deficiencies.

    ERIC Educational Resources Information Center

    Loosli, Alvin R.

    1993-01-01

    Many active athletes do not consume enough zinc or iron, which are important for oxygen activation, electron transport, and injury healing. Subclinical deficiencies may impair performance and impair healing times. People who exercise regularly need counseling about the importance of adequate dietary intake of iron and zinc. (SM)

  20. A novel brominated triazine-based flame retardant (TTBP-TAZ) in plastic consumer products and indoor dust.

    PubMed

    Ballesteros-Gómez, Ana; de Boer, Jacob; Leonards, Pim E G

    2014-04-15

    The presence of a novel brominated flame retardant named 2,4,6-tris(2,4,6-tribromophenoxy)-1,3,5-triazine (TTBP-TAZ) is reported for the first time in plastic parts of consumer products and indoor dust samples. TTBP-TAZ was identified by untargeted screening and can be a replacement of the banned polybrominated diphenyl ethers. Analysis techniques based on ambient mass spectrometry and on liquid chromatography with atmospheric pressure chemical ionization combined with high resolution time-of-flight mass spectrometry were developed for the screening, detection and quantification of this low volatility and high molecular weight compound. TTBP-TAZ was present in 8 of 13 plastic parts of consumer products (from mainly electric and electronic equipment acquired in 2012) at estimated concentrations of 0.01-1.9% by weight of the product (%, w/w). It was not present in any of the older 13 plastic samples that were collected in a recycling park (manufacture date before 2006), this suggests a recent use of TTBP-TAZ. It was also found in 9 of 17 house dust samples in the range of 160-22150 ng g(-1), with the highest levels being found in samples collected on electronic and electrical equipment. These preliminary results highlight the need for further research on TTBP-TAZ and the potential of using alternative analysis methods for the identification of new flame retardants.

  1. Assessment of recall error in self-reported food consumption histories among adults-Particularly delay of interviews decrease completeness of food histories-Germany, 2013.

    PubMed

    Gertler, Maximilian; Czogiel, Irina; Stark, Klaus; Wilking, Hendrik

    2017-01-01

    Poor recall during investigations of foodborne outbreaks may lead to misclassifications in exposure ascertainment. We conducted a simulation study to assess the frequency and determinants of recall errors. Lunch visitors in a cafeteria using exclusively cashless payment reported their consumption of 13 food servings available daily in the three preceding weeks using a self-administered paper-questionnaire. We validated this information using electronic payment information. We calculated associated factors on misclassification of recall according to time, age, sex, education level, dietary habits and type of servings. We included 145/226 (64%) respondents who reported 27,095 consumed food items. Sensitivity of recall was 73%, specificity 96%. In multivariable analysis, for each additional day of recall period, the adjusted chance for false-negative recall increased by 8% (OR: 1.1;95%-CI: 1.06, 1.1), for false-positive recall by 3% (OR: 1.03;95%-CI: 1.02, 1.05), for indecisive recall by 12% (OR: 1.1;95%-CI: 1.08, 1.15). Sex and education-level had minor effects. Forgetting to report consumed foods is more frequent than reporting food-items actually not consumed. Bad recall is strongly enhanced by delay of interviews and may make hypothesis generation and testing very challenging. Side dishes are more easily missed than main courses. If available, electronic payment data can improve food-history information.

  2. WWREX: A case study in the development of Internet E-Commerce in the energy industry

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Yeich, K.; Horner, D.; Dunn, A.

    Even more so than the World Wide Web, the utility industry is undergoing a massive deregulation that is turning it into a Wild West environment that has fostered fierce competition, new technology and new services in the energy marketplace. It has become increasingly complex for consumers, suppliers and utilities to buy and sell energy at the best prices. With the help of the Internet, Per-Se Technologies and North American Power have developed the World Wide Retail Energy eXchange (WWREX): a real-time, Web-based electronic commerce application that matches suppliers of electricity and natural gas with potential customers online. This service ismore » the first online application to facilitate the buying and selling of energy via the Internet. Designed to take advantage of the deregulated utilities marketplace, REX benefits multiple market players. With REX, business energy consumers can buy energy at the best price, from multiple suppliers and with significant time and cost reductions. Suppliers can instantly access new customer bases and close efficient, bulk transactions without the traditional sales and marketing costs associated with selling to a diverse set of consumers. The challenges and solutions of this project illustrate the technologies and techniques in creating a viable E-Commerce application. The resulting system provides effective electronic commerce and solves a critical business need at a relatively low cost.« less

  3. The electron transfer system of syntrophically grown Desulfovibrio vulgaris

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Walker, C.B.; He, Z.; Yang, Z.K.

    2009-05-01

    Interspecies hydrogen transfer between organisms producing and consuming hydrogen promotes the decomposition of organic matter in most anoxic environments. Although syntrophic couplings between hydrogen producers and consumers are a major feature of the carbon cycle, mechanisms for energy recovery at the extremely low free energies of reactions typical of these anaerobic communities have not been established. In this study, comparative transcriptional analysis of a model sulfate-reducing microbe, Desulfovibrio vulgaris Hildenborough, suggested the use of alternative electron transfer systems dependent upon growth modality. During syntrophic growth on lactate with a hydrogenotrophic methanogen, D. vulgaris up-regulated numerous genes involved in electron transfermore » and energy generation when compared with sulfate-limited monocultures. In particular, genes coding for the putative membrane-bound Coo hydrogenase, two periplasmic hydrogenases (Hyd and Hyn) and the well-characterized high-molecular weight cytochrome (Hmc) were among the most highly expressed and up-regulated. Additionally, a predicted operon coding for genes involved in lactate transport and oxidation exhibited up-regulation, further suggesting an alternative pathway for electrons derived from lactate oxidation during syntrophic growth. Mutations in a subset of genes coding for Coo, Hmc, Hyd and Hyn impaired or severely limited syntrophic growth but had little affect on growth via sulfate-respiration. These results demonstrate that syntrophic growth and sulfate-respiration use largely independent energy generation pathways and imply that understanding of microbial processes sustaining nutrient cycling must consider lifestyles not captured in pure culture.« less

  4. The Electron Transfer System of Syntrophically Grown Desulfovibrio vulgaris

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    PBD; ENIGMA; GTL

    2009-06-22

    Interspecies hydrogen transfer between organisms producing and consuming hydrogen promotes the decomposition of organic matter in most anoxic environments. Although syntrophic couplings between hydrogen producers and consumers are a major feature of the carbon cycle, mechanisms for energy recovery at the extremely low free energies of reactions typical of these anaerobic communities have not been established. In this study, comparative transcriptional analysis of a model sulfate-reducing microbe, Desulfovibrio vulgaris Hildenborough, suggested the use of alternative electron transfer systems dependent upon growth modality. During syntrophic growth on lactate with a hydrogenotrophic methanogen, D. vulgaris up-regulated numerous genes involved in electron transfermore » and energy generation when compared with sulfate-limited monocultures. In particular, genes coding for the putative membrane-bound Coo hydrogenase, two periplasmic hydrogenases (Hyd and Hyn) and the well-characterized high-molecular weight cytochrome (Hmc) were among the most highly expressed and up-regulated. Additionally, a predicted operon coding for genes involved in lactate transport and oxidation exhibited up-regulation, further suggesting an alternative pathway for electrons derived from lactate oxidation during syntrophic growth. Mutations in a subset of genes coding for Coo, Hmc, Hyd and Hyn impaired or severely limited syntrophic growth but had little affect on growth via sulfate-respiration. These results demonstrate that syntrophic growth and sulfate-respiration use largely independent energy generation pathways and imply that understanding of microbial processes sustaining nutrient cycling must consider lifestyles not captured in pure culture.« less

  5. Stretchable, Twisted Conductive Microtubules for Wearable Computing, Robotics, Electronics, and Healthcare.

    PubMed

    Do, Thanh Nho; Visell, Yon

    2017-05-11

    Stretchable and flexible multifunctional electronic components, including sensors and actuators, have received increasing attention in robotics, electronics, wearable, and healthcare applications. Despite advances, it has remained challenging to design analogs of many electronic components to be highly stretchable, to be efficient to fabricate, and to provide control over electronic performance. Here, we describe highly elastic sensors and interconnects formed from thin, twisted conductive microtubules. These devices consist of twisted assemblies of thin, highly stretchable (>400%) elastomer tubules filled with liquid conductor (eutectic gallium indium, EGaIn), and fabricated using a simple roller coating process. As we demonstrate, these devices can operate as multimodal sensors for strain, rotation, contact force, or contact location. We also show that, through twisting, it is possible to control their mechanical performance and electronic sensitivity. In extensive experiments, we have evaluated the capabilities of these devices, and have prototyped an array of applications in several domains of stretchable and wearable electronics. These devices provide a novel, low cost solution for high performance stretchable electronics with broad applications in industry, healthcare, and consumer electronics, to emerging product categories of high potential economic and societal significance.

  6. Beneficial Effects of Two Types of Personal Health Record Services Connected With Electronic Medical Records Within the Hospital Setting.

    PubMed

    Lee, Jisan; Kim, James G Boram; Jin, Meiling; Ahn, Kiwhan; Kim, Byungjun; Kim, Sukwha; Kim, Jeongeun

    2017-11-01

    Healthcare consumers must be able to make decisions based on accurate health information. To assist with this, we designed and developed an integrated system connected with electronic medical records in hospitals to ensure delivery of accurate health information. The system-called the Consumer-centered Open Personal Health Record platform-is composed of two services: a portal for users with any disease and a mobile application for users with cleft lip/palate. To assess the benefits of these services, we used a quasi-experimental, pretest-posttest design, assigning participants to the portal (n = 50) and application (n = 52) groups. Both groups showed significantly increased knowledge, both objective (actual knowledge of health information) and subjective (perceived knowledge of health information), after the intervention. Furthermore, while both groups showed higher information needs satisfaction after the intervention, the application group was significantly more satisfied. Knowledge changes were more affected by participant characteristics in the application group. Our results may be due to the application's provision of specific disease information and a personalized treatment plan based on the participant and other users' data. We recommend that services connected with electronic medical records target specific diseases to provide personalized health management to patients in a hospital setting.

  7. Who uses running apps and sports watches? Determinants and consumer profiles of event runners' usage of running-related smartphone applications and sports watches.

    PubMed

    Janssen, Mark; Scheerder, Jeroen; Thibaut, Erik; Brombacher, Aarnout; Vos, Steven

    2017-01-01

    Individual and unorganized sports with a health-related focus, such as recreational running, have grown extensively in the last decade. Consistent with this development, there has been an exponential increase in the availability and use of electronic monitoring devices such as smartphone applications (apps) and sports watches. These electronic devices could provide support and monitoring for unorganized runners, who have no access to professional trainers and coaches. The purpose of this paper is to gain insight into the characteristics of event runners who use running-related apps and sports watches. This knowledge is useful from research, design, and marketing perspectives to adequately address unorganized runners' needs, and to support them in healthy and sustainable running through personalized technology. Data used in this study are drawn from the standardized online Eindhoven Running Survey 2014 (ERS14). In total, 2,172 participants in the Half Marathon Eindhoven 2014 completed the questionnaire (a response rate of 40.0%). Binary logistic regressions were used to analyze the impact of socio-demographic variables, running-related variables, and psychographic characteristics on the use of running-related apps and sports watches. Next, consumer profiles were identified. The results indicate that the use of monitoring devices is affected by socio-demographics as well as sports-related and psychographic variables, and this relationship depends on the type of monitoring device. Therefore, distinctive consumer profiles have been developed to provide a tool for designers and manufacturers of electronic running-related devices to better target (unorganized) runners' needs through personalized and differentiated approaches. Apps are more likely to be used by younger, less experienced and involved runners. Hence, apps have the potential to target this group of novice, less trained, and unorganized runners. In contrast, sports watches are more likely to be used by a different group of runners, older and more experienced runners with higher involvement. Although apps and sports watches may potentially promote and stimulate sports participation, these electronic devices do require a more differentiated approach to target specific needs of runners. Considerable efforts in terms of personalization and tailoring have to be made to develop the full potential of these electronic devices as drivers for healthy and sustainable sports participation.

  8. Who uses running apps and sports watches? Determinants and consumer profiles of event runners’ usage of running-related smartphone applications and sports watches

    PubMed Central

    Scheerder, Jeroen; Thibaut, Erik; Brombacher, Aarnout

    2017-01-01

    Individual and unorganized sports with a health-related focus, such as recreational running, have grown extensively in the last decade. Consistent with this development, there has been an exponential increase in the availability and use of electronic monitoring devices such as smartphone applications (apps) and sports watches. These electronic devices could provide support and monitoring for unorganized runners, who have no access to professional trainers and coaches. The purpose of this paper is to gain insight into the characteristics of event runners who use running-related apps and sports watches. This knowledge is useful from research, design, and marketing perspectives to adequately address unorganized runners’ needs, and to support them in healthy and sustainable running through personalized technology. Data used in this study are drawn from the standardized online Eindhoven Running Survey 2014 (ERS14). In total, 2,172 participants in the Half Marathon Eindhoven 2014 completed the questionnaire (a response rate of 40.0%). Binary logistic regressions were used to analyze the impact of socio-demographic variables, running-related variables, and psychographic characteristics on the use of running-related apps and sports watches. Next, consumer profiles were identified. The results indicate that the use of monitoring devices is affected by socio-demographics as well as sports-related and psychographic variables, and this relationship depends on the type of monitoring device. Therefore, distinctive consumer profiles have been developed to provide a tool for designers and manufacturers of electronic running-related devices to better target (unorganized) runners’ needs through personalized and differentiated approaches. Apps are more likely to be used by younger, less experienced and involved runners. Hence, apps have the potential to target this group of novice, less trained, and unorganized runners. In contrast, sports watches are more likely to be used by a different group of runners, older and more experienced runners with higher involvement. Although apps and sports watches may potentially promote and stimulate sports participation, these electronic devices do require a more differentiated approach to target specific needs of runners. Considerable efforts in terms of personalization and tailoring have to be made to develop the full potential of these electronic devices as drivers for healthy and sustainable sports participation. PMID:28732074

  9. Involvement of consumers in studies run by the Medical Research Council Clinical Trials Unit: Results of a survey

    PubMed Central

    2012-01-01

    Background We aimed to establish levels of consumer involvement in randomised controlled trials (RCTs), meta-analyses and other studies carried out by the UK Medical Research Council (MRC) Clinical Trials Unit across the range of research programs, predominantly in cancer and HIV. Methods Staff responsible for studies that were included in a Unit Progress Report (MRC CTU, April 2009) were asked to complete a semi-structured questionnaire survey regarding consumer involvement. This was defined as active involvement of consumers as partners in the research process and not as subjects of that research. The electronic questionnaires combined open and closed questions, intended to capture quantitative and qualitative information on whether studies had involved consumers; types of activities undertaken; recruitment and support; advantages and disadvantages of involvement and its perceived impact on aspects of the research. Results Between October 2009 and April 2010, 138 completed questionnaires (86%) were returned. Studies had been conducted over a 20 year period from 1989, and around half were in cancer; 30% in HIV and 20% were in other disease areas including arthritis, tuberculosis and blood transfusion medicine. Forty-three studies (31%) had some consumer involvement, most commonly as members of trial management groups (TMG) [88%]. A number of positive impacts on both the research and the researcher were identified. Researchers generally felt involvement was worthwhile and some felt that consumer involvement had improved the credibility of the research. Benefits in design and quality, trial recruitment, dissemination and decision making were also perceived. Researchers felt they learned from consumer involvement, albeit that there were some barriers. Conclusions Whilst most researchers identified benefits of involving consumers, most of studies included in the survey had no involvement. Information from this survey will inform the development of a unit policy on consumer involvement, to guide future research conducted within the MRC Clinical Trials Unit and beyond. PMID:22243649

  10. Involvement of consumers in studies run by the Medical Research Council Clinical Trials Unit: results of a survey.

    PubMed

    Vale, Claire L; Thompson, Lindsay C; Murphy, Claire; Forcat, Silvia; Hanley, Bec

    2012-01-13

    We aimed to establish levels of consumer involvement in randomised controlled trials (RCTs), meta-analyses and other studies carried out by the UK Medical Research Council (MRC) Clinical Trials Unit across the range of research programs, predominantly in cancer and HIV. Staff responsible for studies that were included in a Unit Progress Report (MRC CTU, April 2009) were asked to complete a semi-structured questionnaire survey regarding consumer involvement. This was defined as active involvement of consumers as partners in the research process and not as subjects of that research. The electronic questionnaires combined open and closed questions, intended to capture quantitative and qualitative information on whether studies had involved consumers; types of activities undertaken; recruitment and support; advantages and disadvantages of involvement and its perceived impact on aspects of the research. Between October 2009 and April 2010, 138 completed questionnaires (86%) were returned. Studies had been conducted over a 20 year period from 1989, and around half were in cancer; 30% in HIV and 20% were in other disease areas including arthritis, tuberculosis and blood transfusion medicine. Forty-three studies (31%) had some consumer involvement, most commonly as members of trial management groups (TMG) [88%]. A number of positive impacts on both the research and the researcher were identified. Researchers generally felt involvement was worthwhile and some felt that consumer involvement had improved the credibility of the research. Benefits in design and quality, trial recruitment, dissemination and decision making were also perceived. Researchers felt they learned from consumer involvement, albeit that there were some barriers. Whilst most researchers identified benefits of involving consumers, most of studies included in the survey had no involvement. Information from this survey will inform the development of a unit policy on consumer involvement, to guide future research conducted within the MRC Clinical Trials Unit and beyond.

  11. A critical analysis of the literature on the Internet and consumer health information.

    PubMed

    Powell, J A; Lowe, P; Griffiths, F E; Thorogood, M

    2005-01-01

    A critical review of the published literature investigating the Internet and consumer health information was undertaken in order to inform further research and policy. A qualitative, narrative method was used, consisting of a three-stage process of identification and collation, thematic coding, and critical analysis. This analysis identified five main themes in the research in this area: (1) the quality of online health information for consumers; (2) consumer use of the Internet for health information; (3) the effect of e-health on the practitioner-patient relationship; (4) virtual communities and online social support and (5) the electronic delivery of information-based interventions. Analysis of these themes revealed more about the concerns of health professionals than about the effect of the Internet on users. Much of the existing work has concentrated on quantifying characteristics of the Internet: for example, measuring the quality of online information, or describing the numbers of users in different health-care settings. There is a lack of qualitative research that explores how citizens are actually using the Internet for health care.

  12. Boosting beauty in an economic decline: mating, spending, and the lipstick effect.

    PubMed

    Hill, Sarah E; Rodeheffer, Christopher D; Griskevicius, Vladas; Durante, Kristina; White, Andrew Edward

    2012-08-01

    Although consumer spending typically declines in economic recessions, some observers have noted that recessions appear to increase women's spending on beauty products--the so-called lipstick effect. Using both historical spending data and rigorous experiments, the authors examine how and why economic recessions influence women's consumer behavior. Findings revealed that recessionary cues--whether naturally occurring or experimentally primed--decreased desire for most products (e.g., electronics, household items). However, these cues consistently increased women's desire for products that increase attractiveness to mates--the first experimental demonstration of the lipstick effect. Additional studies show that this effect is driven by women's desire to attract mates with resources and depends on the perceived mate attraction function served by these products. In addition to showing how and why economic recessions influence women's desire for beauty products, this research provides novel insights into women's mating psychology, consumer behavior, and the relationship between the two.

  13. Electronic Media and the Publishers, Part I: Teletext.

    ERIC Educational Resources Information Center

    Risher, Carol A.

    1981-01-01

    Describes teletext, a one-way broadcast transmission of text and graphics viewed on a television screen, and its use by publishers as one means of transferring textual and graphical information. Among the services described are news reports; weather forecasts; transportation, community, and consumer information; and advertising. (Author/JJD)

  14. Bioavailability of HBCD/TBB/TBPH from dust and oil vehicles in Sprague-Dawley rats

    USDA-ARS?s Scientific Manuscript database

    Recent data have revealed that homes, offices and cars are often more polluted with environmental contaminants than the outdoors due to high use of textiles, electronics, and insulation that are treated with brominated flame retardants (BFRs). BFRs volatilize and/or weather from consumer products a...

  15. 78 FR 28801 - Foreign-Trade Zone 22-Chicago, Illinois; Authorization of Production Activity Panasonic...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-16

    ... DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B-6-2013] Foreign-Trade Zone 22--Chicago, Illinois; Authorization of Production Activity Panasonic Corporation of North America (Kitting of Consumer Electronics) Aurora, Illinois On January 11, 2013, the Illinois International Port District, grantee of FTZ 22...

  16. Evaluating Thyroxine Metabolism and Transport in Primary Rat and Human Hepatocytes Following BDE 47 Exposure

    EPA Science Inventory

    Polybrominated diphenyl ethers (PBDEs) are a class of flame retardants used in various consumer products including polyurethane foam, electronics, and textile coating. 2,2’,4,4’-Tetrabromodiphenyl ether (BDE 47) is the predominant PBDE congener accounting for half of...

  17. 77 FR 4544 - CPSC Symposium on Phthalates Screening and Testing Methods

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-30

    ... Screening and Testing Methods AGENCY: Consumer Product Safety Commission. ACTION: Notice. SUMMARY: The... symposium on phthalates screening and testing methods. The symposium will be held at the CPSC's National... submit comments, identified by Docket No. CPSC-2012-0008, by any of the following methods: Electronic...

  18. Towards Real Information on Demand.

    ERIC Educational Resources Information Center

    Barker, Philip

    The phrase "information on demand" is often used to describe situations in which digital electronic information can be delivered to particular points of need at times and in ways that are determined by the specific requirements of individual consumers or client groups. The advent of "mobile" computing equipment now makes the…

  19. 40 CFR 86.314-79 - Fuel flow measurement specifications.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... percent of the measuring weight. (3) If the mass of fuel consumed is measured electronically (load cell... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Fuel flow measurement specifications....314-79 Fuel flow measurement specifications. (a) The fuel flow rate measurement instrument must have a...

  20. 40 CFR 92.107 - Fuel flow measurement.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    .... (iii) If the mass of fuel consumed is measured electronically (load cell, load beam, etc.), the error... 40 Protection of Environment 20 2014-07-01 2013-07-01 true Fuel flow measurement. 92.107 Section...) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Test Procedures § 92.107 Fuel flow...

  1. 40 CFR 86.314-79 - Fuel flow measurement specifications.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... percent of the measuring weight. (3) If the mass of fuel consumed is measured electronically (load cell... 40 Protection of Environment 19 2013-07-01 2013-07-01 false Fuel flow measurement specifications....314-79 Fuel flow measurement specifications. (a) The fuel flow rate measurement instrument must have a...

  2. 40 CFR 86.314-79 - Fuel flow measurement specifications.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... percent of the measuring weight. (3) If the mass of fuel consumed is measured electronically (load cell... 40 Protection of Environment 19 2012-07-01 2012-07-01 false Fuel flow measurement specifications....314-79 Fuel flow measurement specifications. (a) The fuel flow rate measurement instrument must have a...

  3. 40 CFR 92.107 - Fuel flow measurement.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    .... (iii) If the mass of fuel consumed is measured electronically (load cell, load beam, etc.), the error... 40 Protection of Environment 21 2013-07-01 2013-07-01 false Fuel flow measurement. 92.107 Section...) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Test Procedures § 92.107 Fuel flow...

  4. 40 CFR 92.107 - Fuel flow measurement.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    .... (iii) If the mass of fuel consumed is measured electronically (load cell, load beam, etc.), the error... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Fuel flow measurement. 92.107 Section...) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Test Procedures § 92.107 Fuel flow...

  5. 40 CFR 92.107 - Fuel flow measurement.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    .... (iii) If the mass of fuel consumed is measured electronically (load cell, load beam, etc.), the error... 40 Protection of Environment 20 2011-07-01 2011-07-01 false Fuel flow measurement. 92.107 Section...) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Test Procedures § 92.107 Fuel flow...

  6. 40 CFR 86.314-79 - Fuel flow measurement specifications.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... percent of the measuring weight. (3) If the mass of fuel consumed is measured electronically (load cell... 40 Protection of Environment 18 2011-07-01 2011-07-01 false Fuel flow measurement specifications....314-79 Fuel flow measurement specifications. (a) The fuel flow rate measurement instrument must have a...

  7. 40 CFR 92.107 - Fuel flow measurement.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    .... (iii) If the mass of fuel consumed is measured electronically (load cell, load beam, etc.), the error... 40 Protection of Environment 21 2012-07-01 2012-07-01 false Fuel flow measurement. 92.107 Section...) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Test Procedures § 92.107 Fuel flow...

  8. A Web-Based Course Assessment Tool with Direct Mapping to Student Outcomes

    ERIC Educational Resources Information Center

    Ibrahim, Walid; Atif, Yacine; Shuaib, Khaled; Sampson, Demetrios

    2015-01-01

    The assessment of curriculum outcomes is an essential element for continuous academic improvement. However, the collection, aggregation and analysis of assessment data are notoriously complex and time-consuming processes. At the same time, only few developments of supporting electronic processes and tools for continuous academic program assessment…

  9. 12 CFR 213.3 - General disclosure requirements.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... consumer consent and other applicable provisions of the Electronic Signatures in Global and National... model form in appendix A of this part. (3) Timing of disclosures. A lessor shall provide the disclosures... scheduled payments may be different because a scheduled date is not a business day; (3) That months have...

  10. 12 CFR 213.3 - General disclosure requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... consumer consent and other applicable provisions of the Electronic Signatures in Global and National... model form in appendix A of this part. (3) Timing of disclosures. A lessor shall provide the disclosures... scheduled payments may be different because a scheduled date is not a business day; (3) That months have...

  11. 17 CFR 248.126 - Delivery of opt out notices.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 17 Commodity and Securities Exchanges 4 2014-04-01 2014-04-01 false Delivery of opt out notices. 248.126 Section 248.126 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION... Internet Web site at which the consumer obtained a product or service electronically and requires the...

  12. 17 CFR 248.126 - Delivery of opt out notices.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 17 Commodity and Securities Exchanges 3 2012-04-01 2012-04-01 false Delivery of opt out notices. 248.126 Section 248.126 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION... Internet Web site at which the consumer obtained a product or service electronically and requires the...

  13. 17 CFR 248.126 - Delivery of opt out notices.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 17 Commodity and Securities Exchanges 3 2013-04-01 2013-04-01 false Delivery of opt out notices. 248.126 Section 248.126 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION... Internet Web site at which the consumer obtained a product or service electronically and requires the...

  14. 17 CFR 248.126 - Delivery of opt out notices.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 17 Commodity and Securities Exchanges 3 2011-04-01 2011-04-01 false Delivery of opt out notices. 248.126 Section 248.126 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION... Internet Web site at which the consumer obtained a product or service electronically and requires the...

  15. The Electronic Portfolio: Ethical Considerations

    ERIC Educational Resources Information Center

    McFadden, Joan R.; Saiki, Diana

    2005-01-01

    Computer technology has become important in Family and Consumer Science (FCS) because it offers improved communication with capabilities such as the Internet that allows for a "more productive workplace" (Jones, 2003, p. 38). Kittross and Gordon (2003) alerted users that as computer technology evolves, there is a need for colleges and universities…

  16. Transferable Skills for Online Peer Learning

    ERIC Educational Resources Information Center

    McLuckie, J.; Topping, K. J.

    2004-01-01

    Efforts to enhance learning through peer interaction in an electronic forum are now commonplace. However, facilitation and moderation of such a forum by academic staff can be of limited effectiveness and very time-consuming. The skills required by peer learners to effectively manage such distributed discourse for themselves have rarely been…

  17. An Introduction to the Internet. Consumer Guide, Number 14.

    ERIC Educational Resources Information Center

    Anderson, Judith

    This newsletter presents an introduction to the Internet. A definition of the Internet and its three principle uses--electronic mail, USENET newsgroups, and information files--are provided. A discussion on how to explore the Internet includes equipment needs, university Internet accounts, commercial vendors, navigating the Internet through the…

  18. A Model of Price Search Behavior in Electronic Marketplace.

    ERIC Educational Resources Information Center

    Jiang, Pingjun

    2002-01-01

    Discussion of online consumer behavior focuses on the development of a conceptual model and a set of propositions to explain the main factors influencing online price search. Integrates the psychological search literature into the context of online searching by incorporating ability and cost to search for information into perceived search…

  19. Inordinate Fondness: The Feds and the Internet.

    ERIC Educational Resources Information Center

    Morehead, Joe

    1997-01-01

    Examines the move to make U. S. government information available solely in an electronic format. Discusses inability of general purpose search engines to access the information; shift of cost to the consumer; the online version of the "Monthly Catalog of United States Government Publications"; federal statistics; Agency Web sites; and a…

  20. Remix and Reuse of Source Code in Software Production

    ERIC Educational Resources Information Center

    Jones, M. Cameron

    2010-01-01

    The means of producing information and the infrastructure for disseminating it are constantly changing. The web mobilizes information in electronic formats, making it easier to copy, modify, remix, and redistribute. This has changed how information is produced, distributed, and used. People are not just consuming information; they are actively…

  1. 47 CFR 15.38 - Incorporation by reference.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ..., 25 West 43rd Street, 4th Floor, New York, NY 10036 or at http://webstore.ansi.org/ansidocstore/default.asp; or Society of Cable Telecommunications Engineers at http://www.scte.org/standards/index.cfm...: Consumer Electronics Association, 2500 Wilson Blvd., Arlington, VA 22201 or at http://www.ce.org...

  2. A bill to amend the Electronic Fund Transfer Act to treat municipalities and school districts as consumers for certain purposes under that Act.

    THOMAS, 111th Congress

    Sen. Schumer, Charles E. [D-NY

    2010-09-29

    Senate - 09/29/2010 Read twice and referred to the Committee on Banking, Housing, and Urban Affairs. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

  3. The Impact of Computer Technology on the Family.

    ERIC Educational Resources Information Center

    Bailey, Anne Wiseman

    1982-01-01

    Computer technology as it affects home and family life is explored. Elements of this technology which are examined include electronic fund transfers (EFT), consumer rights and responsibilities relating to use of EFT, working at home via computer, housing design, costs of computerizing the home, and computerized aids for the handicapped. (CT)

  4. 12 CFR 1005.34 - Procedures for cancellation and refund of remittance transfers.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... recipient. (b) Time limits and refund requirements. A remittance transfer provider shall refund, at no... remittance transfers. 1005.34 Section 1005.34 Banks and Banking BUREAU OF CONSUMER FINANCIAL PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E) Requirements for Remittance Transfers § 1005.34 Procedures for...

  5. 12 CFR 1005.34 - Procedures for cancellation and refund of remittance transfers.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... recipient. (b) Time limits and refund requirements. A remittance transfer provider shall refund, at no... remittance transfers. 1005.34 Section 1005.34 Banks and Banking BUREAU OF CONSUMER FINANCIAL PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E) Requirements for Remittance Transfers § 1005.34 Procedures for...

  6. 12 CFR 706.1 - Definitions.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... organization. (b) Consumer. A natural person member who seeks or acquires goods, services, or money for... union. (d) Debt. Money that is due or alleged to be due from one to another. (e) Earnings. Compensation... are not included within the scope of the term “household goods”: (1) Works of art; (2) Electronic...

  7. 46 CFR 116.202 - Plans and information required.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Safety Center, 2100 2nd St. SW., Stop 7102, Washington, DC 20593-7102, in a written or electronic format... cables, bus-tie cables, feeders, and branch circuit cables; (vi) Power, lighting, and interior communication panelboards with number of circuits and rating of energy consuming devices; (vii) Type and...

  8. 46 CFR 116.202 - Plans and information required.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Safety Center, 2100 2nd St. SW., Stop 7102, Washington, DC 20593-7102, in a written or electronic format... cables, bus-tie cables, feeders, and branch circuit cables; (vi) Power, lighting, and interior communication panelboards with number of circuits and rating of energy consuming devices; (vii) Type and...

  9. 75 FR 16579 - Electronic Fund Transfers

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-01

    ... consumer as a gift. In addition, gift cards can be received through a loyalty, award, or promotional... visit the store or for customer retention purposes, such as through a frequent buyer program. Merchants... gift card or gift certificate and loyalty, award, and promotional gift cards. \\7\\ 74 FR 60986 (Nov. 20...

  10. Digital Audio Radio Broadcast Systems Laboratory Testing Nearly Complete

    NASA Technical Reports Server (NTRS)

    2005-01-01

    Radio history continues to be made at the NASA Lewis Research Center with the completion of phase one of the digital audio radio (DAR) testing conducted by the Consumer Electronics Group of the Electronic Industries Association. This satellite, satellite/terrestrial, and terrestrial digital technology will open up new audio broadcasting opportunities both domestically and worldwide. It will significantly improve the current quality of amplitude-modulated/frequency-modulated (AM/FM) radio with a new digitally modulated radio signal and will introduce true compact-disc-quality (CD-quality) sound for the first time. Lewis is hosting the laboratory testing of seven proposed digital audio radio systems and modes. Two of the proposed systems operate in two modes each, making a total of nine systems being tested. The nine systems are divided into the following types of transmission: in-band on-channel (IBOC), in-band adjacent-channel (IBAC), and new bands. The laboratory testing was conducted by the Consumer Electronics Group of the Electronic Industries Association. Subjective assessments of the audio recordings for each of the nine systems was conducted by the Communications Research Center in Ottawa, Canada, under contract to the Electronic Industries Association. The Communications Research Center has the only CCIR-qualified (Consultative Committee for International Radio) audio testing facility in North America. The main goals of the U.S. testing process are to (1) provide technical data to the Federal Communication Commission (FCC) so that it can establish a standard for digital audio receivers and transmitters and (2) provide the receiver and transmitter industries with the proper standards upon which to build their equipment. In addition, the data will be forwarded to the International Telecommunications Union to help in the establishment of international standards for digital audio receivers and transmitters, thus allowing U.S. manufacturers to compete in the world market.

  11. Comparison of consumers’ views on electronic data sharing for healthcare and research

    PubMed Central

    Joseph, Jill G; Ohno-Machado, Lucila

    2015-01-01

    New models of healthcare delivery such as accountable care organizations and patient-centered medical homes seek to improve quality, access, and cost. They rely on a robust, secure technology infrastructure provided by health information exchanges (HIEs) and distributed research networks and the willingness of patients to share their data. There are few large, in-depth studies of US consumers’ views on privacy, security, and consent in electronic data sharing for healthcare and research together. Objective This paper addresses this gap, reporting on a survey which asks about California consumers’ views of data sharing for healthcare and research together. Materials and Methods The survey conducted was a representative, random-digit dial telephone survey of 800 Californians, performed in Spanish and English. Results There is a great deal of concern that HIEs will worsen privacy (40.3%) and security (42.5%). Consumers are in favor of electronic data sharing but elements of transparency are important: individual control, who has access, and the purpose for use of data. Respondents were more likely to agree to share deidentified information for research than to share identified information for healthcare (76.2% vs 57.3%, p < .001). Discussion While consumers show willingness to share health information electronically, they value individual control and privacy. Responsiveness to these needs, rather than mere reliance on Health Insurance Portability and Accountability Act (HIPAA), may improve support of data networks. Conclusion Responsiveness to the public’s concerns regarding their health information is a pre-requisite for patient-centeredness. This is one of the first in-depth studies of attitudes about electronic data sharing that compares attitudes of the same individual towards healthcare and research. PMID:25829461

  12. Controlled cooling of an electronic system for reduced energy consumption

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    David, Milnes P.; Iyengar, Madhusudan K.; Schmidt, Roger R.

    Energy efficient control of a cooling system cooling an electronic system is provided. The control includes automatically determining at least one adjusted control setting for at least one adjustable cooling component of a cooling system cooling the electronic system. The automatically determining is based, at least in part, on power being consumed by the cooling system and temperature of a heat sink to which heat extracted by the cooling system is rejected. The automatically determining operates to reduce power consumption of the cooling system and/or the electronic system while ensuring that at least one targeted temperature associated with the coolingmore » system or the electronic system is within a desired range. The automatically determining may be based, at least in part, on one or more experimentally obtained models relating the targeted temperature and power consumption of the one or more adjustable cooling components of the cooling system.« less

  13. Controlled cooling of an electronic system based on projected conditions

    DOEpatents

    David, Milnes P.; Iyengar, Madhusudan K.; Schmidt, Roger R.

    2016-05-17

    Energy efficient control of a cooling system cooling an electronic system is provided based, in part, on projected conditions. The control includes automatically determining an adjusted control setting(s) for an adjustable cooling component(s) of the cooling system. The automatically determining is based, at least in part, on projected power consumed by the electronic system at a future time and projected temperature at the future time of a heat sink to which heat extracted is rejected. The automatically determining operates to reduce power consumption of the cooling system and/or the electronic system while ensuring that at least one targeted temperature associated with the cooling system or the electronic system is within a desired range. The automatically determining may be based, at least in part, on an experimentally obtained model(s) relating the targeted temperature and power consumption of the adjustable cooling component(s) of the cooling system.

  14. Controlled cooling of an electronic system based on projected conditions

    DOEpatents

    David, Milnes P.; Iyengar, Madhusudan K.; Schmidt, Roger R.

    2015-08-18

    Energy efficient control of a cooling system cooling an electronic system is provided based, in part, on projected conditions. The control includes automatically determining an adjusted control setting(s) for an adjustable cooling component(s) of the cooling system. The automatically determining is based, at least in part, on projected power consumed by the electronic system at a future time and projected temperature at the future time of a heat sink to which heat extracted is rejected. The automatically determining operates to reduce power consumption of the cooling system and/or the electronic system while ensuring that at least one targeted temperature associated with the cooling system or the electronic system is within a desired range. The automatically determining may be based, at least in part, on an experimentally obtained model(s) relating the targeted temperature and power consumption of the adjustable cooling component(s) of the cooling system.

  15. An examination of electronic health information privacy in older adults.

    PubMed

    Le, Thai; Thompson, Hilaire; Demiris, George

    2013-01-01

    Older adults are the quickest growing demographic group and are key consumers of health services. As the United States health system transitions to electronic health records, it is important to understand older adult perceptions of privacy and security. We performed a secondary analysis of the Health Information National Trends Survey (2012, Cycle 1), to examine differences in perceptions of electronic health information privacy between older adults and the general population. We found differences in the level of importance placed on access to electronic health information (older adults placed greater emphasis on provider as opposed to personal access) and tendency to withhold information out of concerns for privacy and security (older adults were less likely to withhold information). We provide recommendations to alleviate some of these privacy concerns. This may facilitate greater use of electronic health communication between patient and provider, while promoting shared decision making.

  16. Far from the Lonely Crowd: The Trenchant Techno-Cynicism of Mr. Robot.

    PubMed

    Volmar, Daniel

    2017-12-01

    Mr. Robot is a television drama with an unusually techno-cynical premise, tying cybersecurity to the contemporary malaise of social alienation and political disengagement. Weary of consumer capitalism, the show's youthful protagonists seek a more authentic sense of belonging by exploiting the vulnerability of a global economic system that depends critically on creaking technological infrastructures. A remarkable display of iconoclasm for commercial entertainment, Mr. Robot suggests rising discontentment with the commodification of friendship through consumer electronics, but it may also offer media enterprises a model for how to profit from that discontentment in the future. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Toward a patient-centric medical information model: issues and challenges for US adoption.

    PubMed

    Lorence, Daniel; Monatesti, Sabatini; Margenthaler, Robert; Hoadley, Ellen

    2005-01-01

    As the USA moves, incrementally, toward evidence-based medicine, there is growing awareness of the importance of innovation in information management. Mandates for change include improved use of resources, accelerated diffusion of knowledge and an advanced consumer role. Key among these requirements is the need for a fundamentally different patient information recording system. Within the challenges identified in the most recent national health information technology initiative, we propose a model for an electronic, patient-centric medical information infrastructure, highlighting a transportable, scalable and integrated resource. We identify resources available for technology transfer, promoting consumers as integral parts of the collaborative medical decision-making process.

  18. Immersion Cooling of Electronics in DoD Installations

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Coles, Henry; Herrlin, Magnus

    A considerable amount of energy is consumed to cool electronic equipment in data centers. A method for substantially reducing the energy needed for this cooling was demonstrated. The method involves immersing electronic equipment in a non-conductive liquid that changes phase from a liquid to a gas. The liquid used was 3M Novec 649. Two-phase immersion cooling using this liquid is not viable at this time. The primary obstacles are IT equipment failures and costs. However, the demonstrated technology met the performance objectives for energy efficiency and greenhouse gas reduction. Before commercialization of this technology can occur, a root cause analysismore » of the failures should be completed, and the design changes proven.« less

  19. CPOE: a clear purpose plus top-notch technical support equals high physician adoption.

    PubMed

    Birk, Susan

    2010-01-01

    As with any fundamental change, the transition to computerized physician order entry [CPOE] is not a risk-free endeavor, major questions hover around this facet of the arduous and controversial paper-to-electronic conversion currently preoccupying the healthcare industry: Could physician over-reliance on electronic prompts actually lead to an increase in some types of medical errors? Could automated workstations ultimately hinder safety and the delivery of quality care by diminishing face-to-face communication and nuanced discussions? In an ironic twist, could electronic solutions insidiously leach creativity, intuition and judgment from good medicine by keeping physicians tied to tools that consume their time but do not offer effective clinical decision support?

  20. Recycling Pricing and Coordination of WEEE Dual-Channel Closed-Loop Supply Chain Considering Consumers' Bargaining.

    PubMed

    Zhu, Xiaodong; Wang, Jing; Tang, Juan

    2017-12-15

    Environmentally friendly handling and efficient recycling of waste electrical on Waste Electrical and Electronic Equipment (WEEE) have grown to be a global social problem. As holders of WEEE, consumers have a significant effect on the recycling process. A consideration of and attention to the influence of consumer behavior in the recycling process can help achieve more effective recycling of WEEE. In this paper, we built a dual-channel closed-loop supply chain model composed of manufacturers, retailers, and network recycling platforms. Based on the influence of customer bargaining behavior, we studied several different scenarios of centralized decision-making, decentralized decision-making, and contract coordination, using the Stackelberg game theory. The results show that retailers and network recycling platforms will reduce the direct recovery prices to maintain their own profit when considering the impact of consumer bargaining behavior, while remanufacturers will improve the transfer payment price for surrendering part of the profit under revenue and the expense sharing contract. Using this contract, we can achieve supply chain coordination and eliminate the effect of consumer bargaining behavior on supply chain performance. It can be viewed from the parameter sensitivity analysis that when we select the appropriate sharing coefficient, the closed-loop supply chain can achieve the same system performance under a centralized decision.

Top