Soldering Technology and Product Assurance (7th) Proceedings of Annual Seminar Held in China Lake, California on 23, 24, 25 February 1983.

DTIC Science & Technology

1983-02-01

product. For commercial . - iJ% .--.-. - • .. - .. .. - - -- . .-. . . . . : . : : , ’. , .- ,. . j-,,_. . , ,_= . -42- electronics used in consumer ...and is variable according to the environment of the end use. For consumer products used indoors or in benign environments, the cost should not be...assaults have been leveled against consumer products industries and the steel industry, mainly from foreign competitors, the defense and aerospace

Microbial Electrosynthesis: Feeding Microbes Electricity To Convert Carbon Dioxide and Water to Multicarbon Extracellular Organic Compounds

PubMed Central

Nevin, Kelly P.; Woodard, Trevor L.; Franks, Ashley E.; Summers, Zarath M.; Lovley, Derek R.

2010-01-01

The possibility of providing the acetogenic microorganism Sporomusa ovata with electrons delivered directly to the cells with a graphite electrode for the reduction of carbon dioxide to organic compounds was investigated. Biofilms of S. ovata growing on graphite cathode surfaces consumed electrons with the reduction of carbon dioxide to acetate and small amounts of 2-oxobutyrate. Electrons appearing in these products accounted for over 85% of the electrons consumed. These results demonstrate that microbial production of multicarbon organic compounds from carbon dioxide and water with electricity as the energy source is feasible. PMID:20714445

78 FR 9667 - Foreign-Trade Zone 50-Long Beach, California; Notification of Proposed Production Activity...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-11

... Consumer Electronics); Anaheim, CA The Board of Harbor Commissioners of the Port of Long Beach, grantee of... located within Site 31 of FTZ 50. The facility is used for the kitting of consumer electronics parts into...

Electronic manufacturing and packaging in Japan

NASA Technical Reports Server (NTRS)

Kelly, Michael J.; Boulton, William R. (Editor); Kukowski, John A.; Meieran, Eugene S.; Pecht, Michael; Peeples, John W.; Tummala, Rao R.

1995-01-01

This report summarizes the status of electronic manufacturing and packaging technology in Japan in comparison to that in the United States, and its impact on competition in electronic manufacturing in general. In addition to electronic manufacturing technologies, the report covers technology and manufacturing infrastructure, electronics manufacturing and assembly, quality assurance and reliability in the Japanese electronics industry, and successful product realization strategies. The panel found that Japan leads the United States in almost every electronics packaging technology. Japan clearly has achieved a strategic advantage in electronics production and process technologies. Panel members believe that Japanese competitors could be leading U.S. firms by as much as a decade in some electronics process technologies. Japan has established this marked competitive advantage in electronics as a consequence of developing low-cost, high-volume consumer products. Japan's infrastructure, and the remarkable cohesiveness of vision and purpose in government and industry, are key factors in the success of Japan's electronics industry. Although Japan will continue to dominate consumer electronics in the foreseeable future, opportunities exist for the United States and other industrial countries to capture an increasingly large part of the market. The JTEC panel has identified no insurmountable barriers that would prevent the United States from regaining a significant share of the consumer electronics market; in fact, there is ample evidence that the United States needs to aggressively pursue high-volume, low-cost electronic assembly, because it is a critical path leading to high-performance electronic systems.

From electronic consumer products to e-wastes: Global outlook, waste quantities, recycling challenges.

PubMed

Tansel, Berrin

2017-01-01

Advancements in technology, materials development, and manufacturing processes have changed the consumer products and composition of municipal solid waste (MSW) since 1960s. Increasing quantities of discarded consumer products remain a major challenge for recycling efforts, especially for discarded electronic products (also referred as e-waste). The growing demand for high tech products has increased the e-waste quantities and its cross boundary transport globally. This paper reviews the challenges associated with increasing e-waste quantities. The increasing need for raw materials (especially for rare earth and minor elements) and unregulated e-waste recycling operations in developing and underdeveloped counties contribute to the growing concerns for e-waste management. Although the markets for recycled materials are increasing; there are major challenges for development of the necessary infrastructure for e-waste management and accountability as well as development of effective materials recovery technologies and product design. Copyright © 2016 Elsevier Ltd. All rights reserved.

Consumer protection act for digital products

NASA Astrophysics Data System (ADS)

Hampel, Viktor E.

1996-03-01

This report proposes a `Consumer Protection Act for Digital Products' to support electronic commerce and to control the increasing abuse and lack of security on the national information highways. Patterned after the `Food and Drug Act of 1906 (21 USC)' and subsequent legislation, a new agency similar to that of the FDA would have the authority `to develop administrative policy with regard to the safety, effectiveness, and labeling of digital products and their communications for human use, and to review and evaluate new applications of such products.' Specifically, it is proposed that standards, originally developed by the defense industry for the labeling, enveloping, and authentication of digital products delivered to the Government, be extended to promote global electronic commerce by protecting the intellectual property rights of producers, establishing their liability for the end-use of digital products, and give consumers means for informed decision making and purchase.

Production and Consumption of Hydrogen in Hot Spring Microbial Mats Dominated by a Filamentous Anoxygenic Photosynthetic Bacterium

PubMed Central

Otaki, Hiroyo; Everroad, R. Craig; Matsuura, Katsumi; Haruta, Shin

2012-01-01

Microbial mats containing the filamentous anoxygenic photosynthetic bacterium Chloroflexus aggregans develop at Nakabusa hot spring in Japan. Under anaerobic conditions in these mats, interspecies interaction between sulfate-reducing bacteria as sulfide producers and C. aggregans as a sulfide consumer has been proposed to constitute a sulfur cycle; however, the electron donor utilized for microbial sulfide production at Nakabusa remains to be identified. In order to determine this electron donor and its source, ex situ experimental incubation of mats was explored. In the presence of molybdate, which inhibits biological sulfate reduction, hydrogen gas was released from mat samples, indicating that this hydrogen is normally consumed as an electron donor by sulfate-reducing bacteria. Hydrogen production decreased under illumination, indicating that C. aggregans also functions as a hydrogen consumer. Small amounts of hydrogen may have also been consumed for sulfur reduction. Clone library analysis of 16S rRNA genes amplified from the mats indicated the existence of several species of hydrogen-producing fermentative bacteria. Among them, the most dominant fermenter, Fervidobacterium sp., was successfully isolated. This isolate produced hydrogen through the fermentation of organic carbon. Dispersion of microbial cells in the mats resulted in hydrogen production without the addition of molybdate, suggesting that simultaneous production and consumption of hydrogen in the mats requires dense packing of cells. We propose a cyclic electron flow within the microbial mats, i.e., electron flow occurs through three elements: S (elemental sulfur, sulfide, sulfate), C (carbon dioxide, organic carbon) and H (di-hydrogen, protons). PMID:22446313

Sensors As Tools for Quantitation, Nanotoxicity and Nanomonitoring Assessment of Engineered Nanomaterials

EPA Science Inventory

The discovery of fullerenes in 1985 has ushered in an explosive growth in the applications of engineered nanomaterials and consumer products. Nanotechnology and engineered nanomaterials (ENMs) are being incorporated into a range of commercial products such as consumer electronic...

Research strategies for safety evaluation of nanomaterials, part VII: evaluating consumer exposure to nanoscale materials.

PubMed

Thomas, Treye; Thomas, Karluss; Sadrieh, Nakissa; Savage, Nora; Adair, Patricia; Bronaugh, Robert

2006-05-01

Considerable media attention has recently been given to novel applications for products that contain nanoscale materials. These products could have utility in several industries that market consumer products, including textiles, sporting equipment, cosmetics, consumer electronics, and household cleaners. Some of the purported benefits of these products include improved performance, convenience, lower cost, as well as other desirable features, when compared to the conventional products that do not contain nanoscale materials. Although there are numerous likely consumer advantages from products containing nanoscale materials, there is very little information available regarding consumer exposure to the nanoscale materials in these products or any associated risks from these exposures. This paper seeks to review a limited subset of products that contain nanoscale materials, assess the available data for evaluating the consumer exposures and potential hazards associated with these products, and discuss the capacity of U.S. regulatory agencies to address the potential risks associated with these products.

16 CFR 1110.5 - Acceptable certificates.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Acceptable certificates. 1110.5 Section 1110.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CERTIFICATES OF COMPLIANCE § 1110.5 Acceptable certificates. A certificate that is in hard copy or electronic...

16 CFR 1110.5 - Acceptable certificates.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Acceptable certificates. 1110.5 Section 1110.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CERTIFICATES OF COMPLIANCE § 1110.5 Acceptable certificates. A certificate that is in hard copy or electronic...

16 CFR 1110.5 - Acceptable certificates.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Acceptable certificates. 1110.5 Section 1110.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CERTIFICATES OF COMPLIANCE § 1110.5 Acceptable certificates. A certificate that is in hard copy or electronic...

16 CFR 1110.5 - Acceptable certificates.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Acceptable certificates. 1110.5 Section 1110.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CERTIFICATES OF COMPLIANCE § 1110.5 Acceptable certificates. A certificate that is in hard copy or electronic...

Analyzing the Environmental Impacts of Laptop Enclosures Using Screening-Level Life Cycle Assessment to Support Sustainable Consumer Electronics

EPA Science Inventory

With the ever-increasing amount of consumer electronics in service, it is essential industries and policy-makers work together to develop ways to manufacture more environmentally sustainable IT products which meet the needs of society. The objective of this study was to better un...

Electronics

DTIC Science & Technology

2001-01-01

International Acer Incorporated, Hsin Chu, Taiwan Aerospace Industrial Development Corporation, Taichung, Taiwan American Institute of Taiwan, Taipei, Taiwan...Singapore and Malaysia .5 - 4 - The largest market for semiconductor products is the high technology consumer electronics industry that consumes up...Singapore, and Malaysia . A new semiconductor facility costs around $3 billion to build and takes about two years to become operational

78 FR 76297 - Social Media: Consumer Compliance Risk Management Guidance

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-17

... controls should apply to all customers, products and services, including customers engaging in electronic banking (e-banking) through the use of social media, and e- banking products and services offered in the...., Washington DC 20219, (202) 649-7181. Board: Lanette Meister, Senior Supervisory Consumer Financial Services...

16 CFR § 1110.5 - Acceptable certificates.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Acceptable certificates. § 1110.5 Section § 1110.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CERTIFICATES OF COMPLIANCE § 1110.5 Acceptable certificates. A certificate that is in hard copy or electronic...

Electricity-driven metabolic shift through direct electron uptake by electroactive heterotroph Clostridium pasteurianum

PubMed Central

Choi, Okkyoung; Kim, Taeyeon; Woo, Han Min; Um, Youngsoon

2014-01-01

Although microbes directly accepting electrons from a cathode have been applied for CO2 reduction to produce multicarbon-compounds, a high electron demand and low product concentration are critical limitations. Alternatively, the utilization of electrons as a co-reducing power during fermentation has been attempted, but there must be exogenous mediators due to the lack of an electroactive heterotroph. Here, we show that Clostridium pasteurianum DSM 525 simultaneously utilizes both cathode and substrate as electron donors through direct electron transfer. In a cathode compartment poised at +0.045 V vs. SHE, a metabolic shift in C. pasteurianum occurs toward NADH-consuming metabolite production such as butanol from glucose (20% shift in terms of NADH consumption) and 1,3-propandiol from glycerol (21% shift in terms of NADH consumption). Notably, a small amount of electron uptake significantly induces NADH-consuming pathways over the stoichiometric contribution of the electrons as reducing equivalents. Our results demonstrate a previously unknown electroactivity and metabolic shift in the biochemical-producing heterotroph, opening up the possibility of efficient and enhanced production of electron-dense metabolites using electricity. PMID:25376371

A methodology for evaluating the usability of audiovisual consumer electronic products.

PubMed

Kwahk, Jiyoung; Han, Sung H

2002-09-01

Usability evaluation is now considered an essential procedure in consumer product development. Many studies have been conducted to develop various techniques and methods of usability evaluation hoping to help the evaluators choose appropriate methods. However, planning and conducting usability evaluation requires considerations of a number of factors surrounding the evaluation process including the product, user, activity, and environmental characteristics. In this perspective, this study suggested a new methodology of usability evaluation through a simple, structured framework. The framework was outlined by three major components: the interface features of a product as design variables, the evaluation context consisting of user, product, activity, and environment as context variables, and the usability measures as dependent variables. Based on this framework, this study established methods to specify the product interface features, to define evaluation context, and to measure usability. The effectiveness of this methodology was demonstrated through case studies in which the usability of audiovisual products was evaluated by using the methods developed in this study. This study is expected to help the usability practitioners in consumer electronics industry in various ways. Most directly, it supports the evaluators' plan and conduct usability evaluation sessions in a systematic and structured manner. In addition, it can be applied to other categories of consumer products (such as appliances, automobiles, communication devices, etc.) with minor modifications as necessary.

12 CFR 222.24 - Reasonable opportunity to opt out.

Code of Federal Regulations, 2010 CFR

2010-01-01

... at an Internet Web site at which the consumer has obtained a product or service. The consumer... consumer at the time of an electronic transaction, such as a transaction conducted on an Internet Web site... one that allows consumers to indicate that they do not want to opt out. (5) By including in a privacy...

77 FR 30923 - Electronic Fund Transfers (Regulation E)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-24

.... The Bureau seeks public input on the costs, and benefits, and consumer protection issues related to... interested in learning more about this product, including its costs, benefits, and risks to consumers. The... their costs, benefits, and risks to consumers. These comments, in conjunction with other outreach and...

17 CFR 160.7 - Form of opt out notice to consumers; opt out methods.

Code of Federal Regulations, 2010 CFR

2010-04-01

... consumer agrees, electronically. (2) When a customer relationship terminates, the customer's opt out... that relationship. If the individual subsequently establishes a new customer relationship with you, the... relationships. (1) If two or more consumers jointly obtain a financial product or service from you, you may...

Warning Statements and Safety Practices among Manufacturers and Distributors of Electronic Cigarette Liquids in the United States.

PubMed

Fagan, Pebbles; Pokhrel, Pallav; Herzog, Thaddeus A; Guy, Mignonne C; Sakuma, Kari-Lyn K; Trinidad, Dennis R; Cassel, Kevin; Jorgensen, Dorothy; Lynch, Tania; Felicitas-Perkins, Jamie Q; Palafox, Sherilyn; Hamamura, Faith; Maloney, Sarah; Degree, Kaylah; Sterling, Kymberle; Moolchan, Eric; Clanton, Mark S; Eissenberg, Thomas

2017-05-18

Prior to the Food and Drug Administration's (FDA) regulation of electronic cigarettes and warning statements related to nicotine addiction, there was no critical examination of manufacturer/distributor voluntary practices that could potentially inform FDA actions aimed to protect consumers. This study examined the content of warning statements and safety characteristics of electronic cigarette liquid bottles using a national sample. Research staff randomly selected four electronic cigarette liquid manufacturers/distributors from four U.S. geographic regions. Staff documented the characteristics of product packaging and content of warning statements on 147 electronic cigarette liquids (0-30 mg/ml of nicotine) purchased online from 16 manufacturers/distributors in April of 2016. Data showed that 97.9% of the electronic cigarette liquid bottles included a warning statement, most of which focused on nicotine exposure rather than health. Only 22.4% of bottles used a warning statement that indicated the product "contained nicotine". Of bottles that advertised a nicotine-based concentration of 12 mg/ml, 26% had a warning statements stated that the product "contains nicotine". None of the statements that indicated that the product "contained nicotine" stated that nicotine was "addictive". All bottles had a safety cap and 12% were in plastic shrink-wrap. Fifty-six percent of the websites had a minimum age requirement barrier that prevented under-aged persons from entering. Most manufacturers/distributors printed a warning statement on electronic cigarette liquid bottles, but avoided warning consumers about the presence and the addictiveness of nicotine. Studies are needed to examine manufacturer/distributor modifications to product packaging and how packaging affects consumer behaviors. These data can inform future FDA requirements related to the packaging and advertising of e-cigarette liquids; regulation related to the content of warning statements, including exposure warning statements, which are not currently mandated; and requirements on websites or language on packaging to help manufacturers adhere to the minimum age of purchase regulation. The data can also be used to help FDA develop additional guidance on the framing of statements on packaging that helps consumers make informed decisions about purchasing the product or protecting young people from use or unintentional exposure to the product. © The Author 2017. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

The relevance of netnography to the harness of Romanian health care electronic word-of-mouth.

PubMed

Bratucu, R; Gheorghe, I R; Radu, A; Purcarea, V L

2014-09-15

Nowadays, consumers use the computer mediated communication to make purchase decisions on a large variety of products and services. Since health care services are archetypal by nature, consumers in this field are one of the most encountered users of electronic word-of-mouth. The objective of this paper is to explain and support the necessity of adopting a different qualitative method when electronic word of mouth is harnessed on health care dedicated forums, that is, netnography.

The relevance of netnography to the harness of Romanian health care electronic word-of-mouth

PubMed Central

Bratucu, R; Gheorghe, IR; Radu, A; Purcarea, VL

2014-01-01

Abstract Nowadays, consumers use the computer mediated communication to make purchase decisions on a large variety of products and services. Since health care services are archetypal by nature, consumers in this field are one of the most encountered users of electronic word-of-mouth. The objective of this paper is to explain and support the necessity of adopting a different qualitative method when electronic word of mouth is harnessed on health care dedicated forums, that is, netnography. PMID:25408755

Distress and Other Situational Factors that Influence Consumer Willingness to Provide Personal Information in an Online Buyer-Seller Exchange: An Equity Theory Perspective

ERIC Educational Resources Information Center

Barto, Thomas Peter

2011-01-01

Global electronic markets will profoundly impact commerce in the 21 st century. Brick-and-mortar retailers are using technology for electronic marketing purposes where the familiar layout of the physical store becomes a maze of pulldown menus, product indices, and search features creating a new unknown for consumers and concerns for information…

Disassembly factories for electrical and electronic products to recover resources in product and material cycles.

PubMed

Basdere, Bahadir; Seliger, Guenther

2003-12-01

Cycle economy as a paradigm for industry in the 21st century depends on the economical and ecological treatment of limited resources. The objective is to achieve more use with fewer resources to increase the use-productivity of these resources. The European Union, aware of the adverse environmental impacts associated with electrical and electronic consumer goods in particular, has passed legislation regulating their appropriate end-of-life treatment. Adaptation processes, including essential disassembly and re-assembly operations, contribute significantly toward the economical fulfillment of these new legal requirements. Typically, the disassembly of used products is characterized by a high rate of manual operations, wide variety of product types, and unknown product properties. To cope with such demands, life cycle units or product accompanying information systems, are being developed and used for acquiring data about a specific product throughout its life cycle to aid in determining the level of product deterioration. Modular disassembly processes and tools have been developed and realized to enable the handling of multiple productvariants. They are being implemented in prototypical hybrid disassembly systemsfor large- and small-size electrical and electronic consumer goods.

Questionnaire survey of customer satisfaction for product categories towards certification of ergonomic quality in design.

PubMed

Mochimaru, Masaaki; Takahashi, Miwako; Hatakenaka, Nobuko; Horiuchi, Hitoshi

2012-01-01

Customer satisfaction was surveyed for 6 product categories (consumer electronics, daily commodities, home equipment, information systems, cars, and health appliances) by questionnaires based on the Analytic Hierarchy Process. Analyzing weight of evaluation factors, the 6 product categories were reorganized into 4 categories, those were related to 4 aspects in daily living that formed by two axes: home living - mobility life and healthy life - active communication. It was found that consumers were attracted by the actual user test by public institutes for all product categories. The certification based on the design process standard established by authorities, such as EQUID was the second best attractor for consumers.

Sweetener blend optimization by using mixture design methodology and the electronic tongue.

PubMed

Waldrop, Megan E; Ross, Carolyn F

2014-09-01

Utilizing more than one sweetener has been shown to be an effective way to substitute sucrose in food products. The objective of this study was to apply the augmented simplex-centroid mixture design for the optimization of acceptable sweetener blends using coconut sugar, agave, and stevia. Sweetener blends were evaluated in aqueous solutions and gluten-free granola bars by a trained panel and consumers (n = 60). Significant differences were found between sweetener mixtures in solutions by both panelists and consumers (P < 0.05). Taste profiles for the sweetener solutions were also generated using the electronic tongue. Most consumer and trained intensity ratings were highly correlated (R(2) ≥ 0.79) with the electronic tongue taste profile analysis. Granola bars were also found to be significantly different (P < 0.05), with consumers preferring coconut sugar mixtures. Using contour plots and desirability function analysis, an optimal sweetener combination was found for a granola bar formulation of 89.9% coconut sugar, 6.1% agave, and 4% stevia. These results indicate that a mixture design can be a reliable way to develop new sweetener blends for product development. © 2014 Institute of Food Technologists®

Epidemiology of infant ocular and periocular injuries from consumer products in the United States, 2001-2008.

PubMed

Chen, Allison J; Linakis, James G; Mello, Michael J; Greenberg, Paul B

2013-06-01

To quantify and characterize eye injuries related to consumer products in the infant population (0-12 months) treated in United States hospital emergency departments during the period from 2001 to 2008. This study is a descriptive analysis of consumer-product related eye injury data derived from the National Electronic Injury Surveillance System, a probability sample of 100 hospitals nationwide with 24-hour emergency departments. Narrative data were used to assign each case with the consumer products (CPs) causing the eye injury. The proportions of eye injury visits were calculated by age, sex, diagnosis, disposition, locale of incident, and CP categories. We examined the US Consumer Product Safety Commission National Electronic Injury Surveillance System data for all nonfatal eye injuries (853 cases) in the infant population (0-12 months) treated in US emergency departments from 2001 to 2008. These data can be used to project national, annual, weighted estimates of nonfatal injury treated in US emergency departments. There were an estimated 21,271 visits to US emergency departments by patients aged 0-12 months for CP-related eye injuries during the study period. Of these, 63% involved infants aged 9-12 months and 54% involved male patients; 78% of all injuries occurred at home. The CPs causing the most eye injuries belonged to the categories of chemical (46%) and household items (24%). Contusions and abrasions were the leading eye injuries diagnoses (37%). This study suggests that most CP-related infant eye injuries in the United States occur at home and are predominantly caused by chemicals and household products. Published by Mosby, Inc.

76 FR 59394 - Energy Conservation Program for Consumer Products: Publication of the Extension of Interim Waiver...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-26

... Electronics America, Inc. From the Department of Energy Residential Refrigerator and Refrigerator-Freezer Test... Electronics America, Inc. (Samsung) from energy efficiency test procedure requirements that are applicable to...

National Skills Standards Development Program: Organization and Operation of Technical Committees To Develop National Skill Standards for Competency in the Electronics Industry. The Third Party Summative Evaluation of the Electronic Industries Foundation Project. Phase I & II. Final Report.

ERIC Educational Resources Information Center

Losh, Charles

The Electronics Industries Foundation was awarded a project to develop national entry-level standards and a certification system. Ten specialties were included: automotive electronics, avionics, biomedical electronics, business machines, consumer products electronics, general electronics, industrial electronics, instrumentation, microcomputer, and…

Japan's technology and manufacturing infrastructure

NASA Astrophysics Data System (ADS)

Boulton, William R.; Meieran, Eugene S.; Tummala, Rao R.

1995-02-01

The JTEC panel found that, after four decades of development in electronics and manufacturing technologies, Japanese electronics companies are leaders in the development, support, and management of complex, low-cost packaging and assembly technologies used in the production of a broad range of consumer electronics products. The electronics industry's suppliers provide basic materials and equipment required for electronic packaging applications. Panelists concluded that some Japanese firms could be leading U.S. competitors by as much as a decade in these areas. Japan's technology and manufacturing infrastructure is an integral part of its microelectronics industry's success.

Japan's technology and manufacturing infrastructure

NASA Technical Reports Server (NTRS)

Boulton, William R.; Meieran, Eugene S.; Tummala, Rao R.

1995-01-01

The JTEC panel found that, after four decades of development in electronics and manufacturing technologies, Japanese electronics companies are leaders in the development, support, and management of complex, low-cost packaging and assembly technologies used in the production of a broad range of consumer electronics products. The electronics industry's suppliers provide basic materials and equipment required for electronic packaging applications. Panelists concluded that some Japanese firms could be leading U.S. competitors by as much as a decade in these areas. Japan's technology and manufacturing infrastructure is an integral part of its microelectronics industry's success.

Cost-benefit study of consumer product take-back programs using IBM's WIT reverse logistics optimization tool

NASA Astrophysics Data System (ADS)

Veerakamolmal, Pitipong; Lee, Yung-Joon; Fasano, J. P.; Hale, Rhea; Jacques, Mary

2002-02-01

In recent years, there has been increased focus by regulators, manufacturers, and consumers on the issue of product end of life management for electronics. This paper presents an overview of a conceptual study designed to examine the costs and benefits of several different Product Take Back (PTB) scenarios for used electronics equipment. The study utilized a reverse logistics supply chain model to examine the effects of several different factors in PTB programs. The model was done using the IBM supply chain optimization tool known as WIT (Watson Implosion Technology). Using the WIT tool, we were able to determine a theoretical optimal cost scenario for PTB programs. The study was designed to assist IBM internally in determining theoretical optimal Product Take Back program models and determining potential incentives for increasing participation rates.

77 FR 28604 - Agency Information Collection Activities; Proposed Collection; Comment Request; Guidance for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-15

... Approved Application as Required by the Dietary Supplement and Nonprescription Drug Consumer Protection Act... Dietary Supplement and Nonprescription Drug Consumer Protection Act.'' DATES: Submit either electronic or... Nonprescription Human Drug Products Marketed Without an Approved Application as Required by the Dietary Supplement...

Is there any legal and scientific basis for classifying electronic cigarettes as medications?

PubMed

Farsalinos, Konstantinos E; Stimson, Gerry V

2014-05-01

The rapid growth in the use of electronic cigarettes has been accompanied by substantial discussions by governments, international organisations, consumers and public health experts about how they might be regulated. In the European Union they are currently regulated under consumer legislation but new legislation will regulate them under the Tobacco Products Directive. However, several countries have sought to regulate them under medicines regulations. These claims have been successfully challenged in 6 court cases in European states. Under European legislation a product may be deemed to be a medicine by function if it is used in or administered to human beings either with a view to restoring, correcting or modifying physiological functions by exerting a pharmacological, immunological or metabolic action, or to making a medical diagnosis. It is a medicine by presentation if it is presented (e.g. by a manufacturer or distributor) as having properties for treating or preventing disease in human beings. We assess the legal and scientific basis for the claim that electronic cigarettes should be regulated as medicines. We conclude that they are neither medicine by function nor necessarily by presentation The main reason for their existence is as a harm reduction product in which the liking for and/or dependence on nicotine is maintained, and adoption of use is as a substitute for smoking and not as a smoking cessation product. In reality, they are used as consumer products providing pleasure to the user. They are not used to treat nicotine addiction or other disease, but to enable continued use of nicotine. Their use is adjusted individually by each consumer according to his or her perceived pleasure and satisfaction. Gaps in current regulation regarding safety and quality can be met by tailored regulations. Copyright © 2014 Elsevier B.V. All rights reserved.

Employment Lessons from the Electronics Industry.

ERIC Educational Resources Information Center

Alic, John A.; Harris, Martha Caldwell

1986-01-01

Semiskilled and "unskilled" workers in semiconductors, computer manufacturing, and consumer electronics industries are more likely than other workers to lose jobs because of technology, imports, and offshore production. However, advances in technology do tend to create jobs for skilled workers. (CT)

Migration of Organophorus Flame Retardants From Closed cell form to Settled Dust

EPA Science Inventory

Many industrial and consumer products, such as electrical and electronic products, furniture, plastics, textile, and building materials are manufactured with organophosphorus flame retardants (OPFRs). OPFRs can leach or diffuse out of the products and are released to the surround...

Migration of Organophosphate Flame Retardants from Closed Cell Foam to Settled Dust

EPA Science Inventory

Many industrial and consumer products, such as electrical and electronic products, furniture, plastics, textile, and building materials are manufactured with organophosphorus flame retardants (OPFRs). OPFRs can leach or diffuse out of the products and are released to the surround...

78 FR 5773 - Foreign-Trade Zone 22-Chicago, IL, Notification of Proposed Production Activity, Panasonic...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-28

... Electronics), Aurora, IL The Illinois International Port District, grantee of FTZ 22, submitted a notification... facility is used for the kitting of consumer electronics parts into retail packages. Pursuant to 15 CFR 400...

Sorption of Organophosphorus Flame Retardants on Settled Dust

EPA Science Inventory

Organophosphorus flame retardants (OPFRs) are widely used as additives in industrial and consumer products such as electrical and electronic products, furniture, plastics, textiles, and building/construction materials. Due to human exposure and potential health effects, OPFRs inc...

Sorption of Organophosphorus Flame-Retardants on Settled Dust

EPA Science Inventory

Dust is an important sink for indoor air pollutants, such as organophosphorus flame-retardants (OPFRs) that are used as additives in industrial and consumer products including electrical and electronic products, furniture, plastics, textile, and building/construction materials. T...

Sorption of Organophosphorus Flame Retardants (OPFRs) on Settled Dust

EPA Science Inventory

Organophosphorus flame retardants (OPFRs) are widely used as additives in industrial and consumer products such as electrical and electronic products, furniture, plastics, textiles, and building/construction materials. Due to human exposure and potential health effects, OPFRs inc...

Contributions to Industrial Development of Science and Technology Institutions in Malaysia, Nigeria, and Colombia and Opportunities for Bilateral Cooperation (A Cross-Country Comparative Analysis).

DTIC Science & Technology

1979-09-01

inexpensive labor, and to modify products to meet the tastes of local consumers . Indeed, technology development for most industrial operations in these...of oil spills (Exxon) Local flavors added to toothpaste and cosmetics ( Colgate -Palmolive) Development of specialized electronic circuitry (Motorola...conditions, and to adjusting products to local consumer tastes. An exception is the Motorola laboratory in Penang. Using the highly skilled Chinese

12 CFR 571.26 - Delivery of opt-out notices.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Affiliate Marketing § 571.26 Delivery of opt-out notices. (a) In general. The opt-out notice must be... the notice on the Internet Web site at which the consumer obtained a product or service electronically... on an Internet Web site without requiring the consumer to acknowledge receipt of the notice. ...

12 CFR 41.26 - Delivery of opt-out notices.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Affiliate Marketing § 41.26 Delivery of opt-out notices. (a) In general. The opt-out notice must be provided... the notice on the Internet Web site at which the consumer obtained a product or service electronically... on an Internet Web site without requiring the consumer to acknowledge receipt of the notice. ...

12 CFR 334.24 - Reasonable opportunity to opt out.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Internet Web site at which the consumer has obtained a product or service. The consumer acknowledges... the time of an electronic transaction, such as a transaction conducted on an Internet Web site. The... indicate that they do not want to opt out. (5) By including in a privacy notice. The opt-out notice is...

Measuring and Modeling Surface Sorption Dynamics of OPFRs in Stainless Steel Empty Chambers

EPA Science Inventory

Organophosphorus flame retardants (OPFRs) are produced and used widely as alternative additives in building materials and consumer products such as spray polyurethane foam (SPF), polyvinyl chloride flooring, electrical and electronic products, furniture, textile coatings, and pla...

Boosting beauty in an economic decline: mating, spending, and the lipstick effect.

PubMed

Hill, Sarah E; Rodeheffer, Christopher D; Griskevicius, Vladas; Durante, Kristina; White, Andrew Edward

2012-08-01

Although consumer spending typically declines in economic recessions, some observers have noted that recessions appear to increase women's spending on beauty products--the so-called lipstick effect. Using both historical spending data and rigorous experiments, the authors examine how and why economic recessions influence women's consumer behavior. Findings revealed that recessionary cues--whether naturally occurring or experimentally primed--decreased desire for most products (e.g., electronics, household items). However, these cues consistently increased women's desire for products that increase attractiveness to mates--the first experimental demonstration of the lipstick effect. Additional studies show that this effect is driven by women's desire to attract mates with resources and depends on the perceived mate attraction function served by these products. In addition to showing how and why economic recessions influence women's desire for beauty products, this research provides novel insights into women's mating psychology, consumer behavior, and the relationship between the two.

Policy options to reduce consumer waste to zero: comparing product stewardship and extended producer responsibility for refrigerator waste.

PubMed

Nicol, Scott; Thompson, Shirley

2007-06-01

Today, over-consumption, pollution and resource depletion threaten sustainability. Waste management policies frequently fail to reduce consumption, prevent pollution, conserve resources and foster sustainable products. However, waste policies are changing to focus on lifecycle impacts of products from the cradle to the grave by extending the responsibilities of stakeholders to post-consumer management. Product stewardship and extended producer responsibility are two policies in use, with radically different results when compared for one consumer product, refrigerators. North America has enacted product stewardship policies that fail to require producers to take physical or financial responsibility for recycling or for environmentally sound disposal, so that releases of ozone depleting substances routinely occur, which contribute to the expanding the ozone hole. Conversely, Europe's Waste Electrical and Electronic Equipment (WEEE) Directive requires extended producer responsibility, whereby producers collect and manage their own post-consumer waste products. WEEE has resulted in high recycling rates of greater than 85%, reduced emissions of ozone-depleting substances and other toxins, greener production methods, such as replacing greenhouse gas refrigerants with environmentally friendly hydrocarbons and more reuse of refrigerators in the EU in comparison with North America.

Radial Head Subluxation Among Young Children in the United States Associated With Consumer Products and Recreational Activities.

PubMed

Welch, Rachel; Chounthirath, Thiphalak; Smith, Gary A

2017-07-01

This study investigated the epidemiology of children treated in US emergency departments for radial head subluxation (RHS) associated with consumer products and recreational activities using data from the National Electronic Injury Surveillance System. An estimated 430 766 (95% confidence interval: 341 194-520 339) children ≤5 years of age were treated for RHS in US emergency departments from 1990 to 2011. The mean patient age was 2.1 years, and 56.5% of patients were girls. The most common mechanism of injury was a fall (43.2%), followed by arm pull (39.4%). The annual rate of RHS increased significantly by 190.1% during the 22-year study period. This is the largest study of RHS to date and the first to use a nationally representative sample to investigate secular trends and mechanisms of injury for RHS associated with consumer products and recreational activities. Events associated with consumer products and recreational activities are an important increasing source of RHS.

The Influence of Typeface on Students' Perceptions of Online Instructors

ERIC Educational Resources Information Center

Louch, Michelle O'Brien; Stork, Elizabeth

2014-01-01

At its base, advertising is the process of using visual images and words to attract and convince consumers that a certain product has certain attributes. The same effect exists in electronic communication, strongly so in online courses where most if not all interaction between instructor and student is in writing. Arguably, if consumers make…

Dual use application of killer app FHE products for Mil/Aero

NASA Astrophysics Data System (ADS)

Hackler, R. Douglas

2016-05-01

The flexible electronics industry has adopted flexible hybrid electronic (FHE) systems as a go to market strategy. High volume products are emerging for body worn bio patches, conformal structural appliques and smart labels. These products were principally developed for volume consumer and industrial market solutions but are directly applicable to advanced defense systems. This article highlights the state of the art for bio patch, conformal and smart FHE products and identifies their dual use capability for defense systems. A discussion of the manufacturing base for FHE products is presented and current experimental prototype results and performance are shared.

Recent progress in OLED and flexible displays and their potential for application to aerospace and military display systems

NASA Astrophysics Data System (ADS)

Sarma, Kalluri

2015-05-01

Organic light emitting diode (OLED) display technology has advanced significantly in recent years and it is increasingly being adapted in consumer electronics products with premium performance, such as high resolution smart phones, Tablet PCs and TVs. Even flexible OLED displays are beginning to be commercialized in consumer electronic devices such as smart phones and smart watches. In addition to the advances in OLED emitters, successful development and adoption of OLED displays for premium performance applications relies on the advances in several enabling technologies including TFT backplanes, pixel drive electronics, pixel patterning technologies, encapsulation technologies and system level engineering. In this paper we will discuss the impact of the recent advances in LTPS and AOS TFTs, R, G, B and White OLED with color filter pixel architectures, and encapsulation, on the success of the OLEDs in consumer electronic devices. We will then discuss potential of these advances in addressing the requirements of OLED and flexible displays for the military and avionics applications.

Parameterizing A Surface Water Model for Multiwalled Carbon Nanotubes

EPA Science Inventory

The unique electronic, mechanical, and structural properties of carbon nanotubes (CNTs) has lead to increasing production of these versatile materials; currently, the use of carbon-based nanomaterials in consumer products is second only to that of nano-scale silver. Although ther...

Promotion of prescription drugs to consumers.

PubMed

Rosenthal, Meredith B; Berndt, Ernst R; Donohue, Julie M; Frank, Richard G; Epstein, Arnold M

2002-02-14

Spending on prescription drugs is the fastest growing component of the health care budget. There is public concern about the possibility that direct-to-consumer advertising of prescription drugs will result in inappropriate prescribing and higher costs of care. Guidelines issued in 1997 by the Food and Drug Administration (FDA) regarding advertising to consumers through electronic media are considered by some to be responsible for unleashing a flood of direct-to-consumer advertising. Using data on spending for promotional purposes and sales of prescription drugs, we examined industrywide trends for various types of promotion. We also tracked the relation between promotional efforts and sales over time. Finally, we documented the variation in direct-to-consumer advertising among and within five therapeutic classes of drugs and compared the variation in the intensity of such advertising with variation in the intensity of promotion to health care professionals. Annual spending on direct-to-consumer advertising for prescription drugs tripled between 1996 and 2000, when it reached nearly $2.5 billion. Despite this increase, such advertising accounts for only 15 percent of the money spent on drug promotion and is highly concentrated on a subgroup of products. Within a therapeutic class, there is marked variation in the intensity of direct-to-consumer advertising, and the amount of such advertising for specific products fluctuates over time. The initial surge in direct-to-consumer advertising preceded the 1997 FDA guidelines that clarified the rules for electronic direct-to-consumer advertising, and thus the 1997 guidelines may not have been the most important reason for the overall increase. Although the use of direct-to-consumer advertising has grown disproportionately to other forms of promotion, it continues to account for a small proportion of total promotional efforts. Nevertheless, physicians must assist patients in evaluating health-related information obtained through direct advertising.

An analysis of preferences for hazardous substances free products: manufacturing, use and end of life of mobile phones.

PubMed

Kaushal, Rajendra Kumar; Nema, Arvind K

2012-11-01

Electronic communication devices such as mobile phones pose significant environmental risks when disposed of after the end of their useful life. Mobile communication devices are one of the fastest growing contributors to the electronic waste (e-waste) stream. Recent legislative pressure and increasing awareness about the environmental risk associated with the hazardous components of the electronic products warrants the manufacturers to reduce or replace the hazardous materials with alternatives. The present study analyses the economic consequences of reducing or replacing these hazardous materials and the possible response of the consumers. A strategic game theory model has been applied in this paper for manufacturer and consumers considering the cost difference between hazardous substances free (HSF) and hazardous substance (HS) mobile. Results suggest that the HSF mobiles can be a preferred choice of the manufacturers as well as consumers if the cost of disposal of HS mobiles can be internalized and a marginal incentive (e.g. 0.9% for a cost difference to 5%, and 5.3% for a cost difference to 10%) is given. The study further highlights the need for realizing the fact that passing on the incentives to the consumers in order to promote schemes for return back to manufacturer at its end of life for effective reuse and recycling gives higher returns.

Consumer products and activities associated with dental injuries to children treated in United States emergency departments, 1990-2003.

PubMed

Stewart, Gregory B; Shields, Brenda J; Fields, Sarah; Comstock, R Dawn; Smith, Gary A

2009-08-01

Describe the association of consumer products and activities with dental injuries among children 0-17 years of age treated in United States emergency departments. A retrospective analysis of data from the National Electronic Injury Surveillance System, 1990-2003. There was an average of 22 000 dental injuries annually among children <18 years of age during the study period, representing an average annual rate of 31.6 dental injuries per 100 000 population. Children with primary dentition (<7 years) sustained over half of the dental injuries recorded, and products/activities associated with home structures/furniture were the leading contributors. Floors, steps, tables, and beds were the consumer products within the home most associated with dental injuries. Outdoor recreational products/activities were associated with the largest number of dental injuries among children with mixed dentition (7-12 years); almost half of these were associated with the bicycle, which was the consumer product associated with the largest number of dental injuries. Among children with permanent teeth (13- to 17-year olds), sports-related products/activities were associated with the highest number of dental injuries. Of all sports, baseball and basketball were associated with the largest number of dental injuries. To our knowledge, this is the first study to evaluate dental injuries among children using a national sample. We identified the leading consumer products/activities associated with dental injuries to children with primary, mixed, and permanent dentition. Knowledge of these consumer products/activities allows for more focused and effective prevention strategies.

Characterization of silver nanoparticles in selected consumer products and its relevance for predicting children's potential exposures.

PubMed

Tulve, Nicolle S; Stefaniak, Aleksandr B; Vance, Marina E; Rogers, Kim; Mwilu, Samuel; LeBouf, Ryan F; Schwegler-Berry, Diane; Willis, Robert; Thomas, Treye A; Marr, Linsey C

2015-05-01

Due to their antifungal, antibacterial, antiviral, and antimicrobial properties, silver nanoparticles (AgNPs) are used in consumer products intended for use by children or in the home. Children may be especially affected by the normal use of consumer products because of their physiological functions, developmental stage, and activities and behaviors. Despite much research to date, children's potential exposures to AgNPs are not well characterized. Our objectives were to characterize selected consumer products containing AgNPs and to use the data to estimate a child's potential non-dietary ingestion exposure. We identified and cataloged 165 consumer products claiming to contain AgNPs that may be used by or near children or found in the home. Nineteen products (textile, liquid, plastic) were selected for further analysis. We developed a tiered analytical approach to determine silver content, form (particulate or ionic), size, morphology, agglomeration state, and composition. Silver was detected in all products except one sippy cup body. Among products in a given category, silver mass contributions were highly variable and not always uniformly distributed within products, highlighting the need to sample multiple areas of a product. Electron microscopy confirmed the presence of AgNPs. Using this data, a child's potential non-dietary ingestion exposure to AgNPs when drinking milk formula from a sippy cup is 1.53 μg Ag/kg. Additional research is needed to understand the number and types of consumer products containing silver and the concentrations of silver in these products in order to more accurately predict children's potential aggregate and cumulative exposures to AgNPs. Published by Elsevier GmbH.

Characterization of silver nanoparticles in selected consumer products and its relevance for predicting children’s potential exposures

PubMed Central

Tulve, Nicolle S.; Stefaniak, Aleksandr B.; Vance, Marina E.; Rogers, Kim; Mwilu, Samuel; LeBouf, Ryan F.; Schwegler-Berry, Diane; Willis, Robert; Thomas, Treye A.; Marr, Linsey C.

2015-01-01

Due to their antifungal, antibacterial, antiviral, and antimicrobial properties, silver nanoparticles (AgNPs) are used in consumer products intended for use by children or in the home. Children may be especially affected by the normal use of consumer products because of their physiological functions, developmental stage, and activities and behaviors. Despite much research to date, children’s potential exposures to AgNPs are not well characterized. Our objectives were to characterize selected consumer products containing AgNPs and to use the data to estimate a child’s potential non-dietary ingestion exposure. We identified and cataloged 165 consumer products claiming to contain AgNPs that may be used by or near children or found in the home. Nineteen products (textile, liquid, plastic) were selected for further analysis. We developed a tiered analytical approach to determine silver content, form (particulate or ionic), size, morphology, agglomeration state, and composition. Silver was detected in all products except one sippy cup body. Among products in a given category, silver mass contributions were highly variable and not always uniformly distributed within products, highlighting the need to sample multiple areas of a product. Electron microscopy confirmed the presence of AgNPs. Using this data, a child’s potential non-dietary ingestion exposure to AgNPs when drinking milk formula from a sippy cup is 1.53 μg Ag/kg. Additional research is needed to understand the number and types of consumer products containing silver and the concentrations of silver in these products in order to more accurately predict children’s potential aggregate and cumulative exposures to AgNPs. PMID:25747543

E-commerce application study and complementary services in the sector of laboratory diagnostics based on consumers' opinion.

PubMed

Kontis, Alexios-Patapios; Siassiakos, Konstantinos; Kaimakamis, Georgios; Lazakidou, Athina

2010-01-01

The field of the Laboratory Diagnostics (in vitro), a sector of the field of health services, constitutes an industrial market that includes activities of research, development, production and products distribution that are designated for laboratory use. These products are defined as techno-medical products including various categories of products such as simple medicines, advanced technological systems, etc. Despite the high performance, the enlargement and the increasing trends of the field, it is not recorded the expected progress in the methods and the ways of promotion, trading and supporting of these products in the market. The present paper aims at the investigation of the consumers' opinion and the specification of those services that are possible to be implemented in electronic services and commerce for a strongly competitive advantage for the enterprises of the sector. The analysis of the findings from the Consumer Purchase Decision Centres (CPDC) shows how important it is to implement web-based applications in the proposed services.

Requirement analysis to promote small-sized E-waste collection from consumers.

PubMed

Mishima, Kuniko; Nishimura, Hidekazu

2016-02-01

The collection and recycling of small-sized waste electrical and electronic equipment is an emerging problem, since these products contain certain amounts of critical metals and rare earths. Even if the amount is not large, having a few supply routes for such recycled resources could be a good strategy to be competitive in a world of finite resources. The small-sized e-waste sometimes contains personal information, therefore, consumers are often reluctant to put them into recycling bins. In order to promote the recycling of E-waste, collection of used products from the consumer becomes important. Effective methods involving incentives for consumers might be necessary. Without such methods, it will be difficult to achieve the critical amounts necessary for an efficient recycling system. This article focused on used mobile phones among information appliances as the first case study, since it contains relatively large amounts of valuable metals compared with other small-sized waste electrical and electronic equipment and there are a large number of products existing in the market. The article carried out surveys to determine what kind of recycled material collection services are preferred by consumers. The results clarify that incentive or reward money alone is not a driving force for recycling behaviour. The article discusses the types of effective services required to promote recycling behaviour. The article concludes that securing information, transferring data and providing proper information about resources and environment can be an effective tool to encourage a recycling behaviour strategy to promote recycling, plus the potential discount service on purchasing new products associated with the return of recycled mobile phones. © The Author(s) 2015.

Basic Business and Economics: Understanding the Uses of the Universal Product Code

ERIC Educational Resources Information Center

Blockhus, Wanda

1977-01-01

Describes the Universal Product Code (UPC), the two-part food labeling and packaging code which is both human- and electronic scanner-readable. Discusses how it affects both consumer and business, and suggests how to teach the UPC code to business education students. (HD)

Three Essays on the Economic Impact of Online Word-of-Mouth in Online Software Market

ERIC Educational Resources Information Center

Zhou, Wenqi

2013-01-01

The advances in information technologies and the Internet significantly promote the prosperous growth of electronic commerce in recent years. Simply surfing the Internet allows consumers to conveniently explore endless product choices and a flood of related product information. As one of the most important sources of product information,…

Injuries Associated With Hazards Involving Motor Vehicle Batteries

DOT National Transportation Integrated Search

1997-07-01

National Highway Traffic Safety Administration's (NHTSA) National Center for : Statistics recently examined data from the Consumer Product Safety Commission's : (CPSC) National Electronic Injury Surveillance (NEISS) on cases involving : injuries burn...

78 FR 28801 - Foreign-Trade Zone 22-Chicago, Illinois; Authorization of Production Activity Panasonic...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-16

... DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B-6-2013] Foreign-Trade Zone 22--Chicago, Illinois; Authorization of Production Activity Panasonic Corporation of North America (Kitting of Consumer Electronics) Aurora, Illinois On January 11, 2013, the Illinois International Port District, grantee of FTZ 22...

Consumer acceptance of and willingness to pay for food nanotechnology: a systematic review

NASA Astrophysics Data System (ADS)

Giles, Emma L.; Kuznesof, Sharron; Clark, Beth; Hubbard, Carmen; Frewer, Lynn J.

2015-12-01

Consumer's attitudes to, and acceptance of, emerging technologies and their applications, are important determinants of their successful implementation and commercialisation. Understanding the range of socio-psychological, cultural and affective factors which may influence consumer responses to applications of nanotechnology will help "fine-tune" the development of consumer products in line with their expectations and preferences. This is particularly true of applications in the food area, where consumer concerns about technologies applied to food production may be elevated. This research applied systematic review methodology to synthesise current knowledge regarding societal acceptance or rejection of nanotechnology applied to agri-food production. The objective was to aggregate knowledge derived from different research areas to gain an overall picture of consumer responses to nanotechnology applied to food production. Relevant electronic databases of peer-reviewed literature were searched from the earliest date available, for peer-reviewed papers which reported primary empirical data on consumer and expert acceptance of agri-food nanotechnology, using a formal systematic review protocol. Inclusion criteria for papers to be included in the review were: empirical peer-reviewed papers written in English; a population sample of adults aged 18 years and over used in the research; a research focus on consumer and expert acceptance of agri-food nanotechnology; and research on attitudes towards, and willingness to pay for, different applications of agri-food nanotechnology. Two researchers independently appraised the papers using NVivo 10 QSR software. Studies examining consumer and expert acceptance were thematically analysed, and key information was collated. The results were synthesised in order to identify trends in information relevant to consumer acceptance of nanotechnology applied to food production. Eight key themes were identified from the 32 papers which were extracted from the literature. These themes were applied to understand the determinants of consumer acceptance of agri-food nanotechnology. Nanotechnology is more likely to be accepted by consumers when applied to development of novel packaging with distinct benefits rather than when integrated directly into agri-food products. Trust and confidence in agri-food nanotechnology and its governance need to be fostered through transparent regulation and development of societally beneficial impacts to increase consumer acceptance.

Consumer acceptance of and willingness to pay for food nanotechnology: a systematic review.

PubMed

Giles, Emma L; Kuznesof, Sharron; Clark, Beth; Hubbard, Carmen; Frewer, Lynn J

Consumer's attitudes to, and acceptance of, emerging technologies and their applications, are important determinants of their successful implementation and commercialisation. Understanding the range of socio-psychological, cultural and affective factors which may influence consumer responses to applications of nanotechnology will help "fine-tune" the development of consumer products in line with their expectations and preferences. This is particularly true of applications in the food area, where consumer concerns about technologies applied to food production may be elevated. This research applied systematic review methodology to synthesise current knowledge regarding societal acceptance or rejection of nanotechnology applied to agri-food production. The objective was to aggregate knowledge derived from different research areas to gain an overall picture of consumer responses to nanotechnology applied to food production. Relevant electronic databases of peer-reviewed literature were searched from the earliest date available, for peer-reviewed papers which reported primary empirical data on consumer and expert acceptance of agri-food nanotechnology, using a formal systematic review protocol. Inclusion criteria for papers to be included in the review were: empirical peer-reviewed papers written in English; a population sample of adults aged 18 years and over used in the research; a research focus on consumer and expert acceptance of agri-food nanotechnology; and research on attitudes towards, and willingness to pay for, different applications of agri-food nanotechnology. Two researchers independently appraised the papers using NVivo 10 QSR software. Studies examining consumer and expert acceptance were thematically analysed, and key information was collated. The results were synthesised in order to identify trends in information relevant to consumer acceptance of nanotechnology applied to food production. Eight key themes were identified from the 32 papers which were extracted from the literature. These themes were applied to understand the determinants of consumer acceptance of agri-food nanotechnology. Nanotechnology is more likely to be accepted by consumers when applied to development of novel packaging with distinct benefits rather than when integrated directly into agri-food products. Trust and confidence in agri-food nanotechnology and its governance need to be fostered through transparent regulation and development of societally beneficial impacts to increase consumer acceptance.

The Release of Nanosilver from Consumer Products Used in the Home

PubMed Central

Benn, Troy; Cavanagh, Bridget; Hristovski, Kiril; Posner, Jonathan D.; Westerhoff, Paul

2016-01-01

Nanosilver has become one of the most widely used nanomaterials in consumer products because of its antimicrobial properties. Public concern over the potential adverse effects of nanosilver's environmental release has prompted discussion of federal regulation. In this paper, we assess several classes of consumer products for their silver content and potential to release nanosilver into water, air, or soil. Silver was quantified in a shirt, a medical mask and cloth, toothpaste, shampoo, detergent, a towel, a toy teddy bear, and two humidifiers. Silver concentrations ranged from 1.4 to 270,000 μg Ag g product−1. Products were washed in 500 mL of tap water to assess the potential release of silver into aqueous environmental matrices (wastewater, surface water, saliva, etc.). Silver was released in quantities up to 45 μg Ag g product−1, and size fractions were both larger and smaller than 100 nm. Scanning electron microscopy confirmed the presence of nanoparticle silver in most products as well as in the wash water samples. Four products were subjected to a toxicity characterization leaching procedure to assess the release of silver in a landfill. The medical cloth released an amount of silver comparable to the toxicity characterization limit. This paper presents methodologies that can be used to quantify and characterize silver and other nanomaterials in consumer products. The quantities of silver in consumer products can in turn be used to estimate real-world human and environmental exposure levels. PMID:21284285

47 CFR 15.118 - Cable ready consumer electronics equipment.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Cable ready consumer electronics equipment. 15... Unintentional Radiators § 15.118 Cable ready consumer electronics equipment. (a) All consumer electronics TV... provisions of this section. Consumer electronics TV receiving equipment that includes features intended for...

47 CFR 15.118 - Cable ready consumer electronics equipment.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 1 2012-10-01 2012-10-01 false Cable ready consumer electronics equipment. 15... Unintentional Radiators § 15.118 Cable ready consumer electronics equipment. (a) All consumer electronics TV... provisions of this section. Consumer electronics TV receiving equipment that includes features intended for...

47 CFR 15.118 - Cable ready consumer electronics equipment.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 1 2011-10-01 2011-10-01 false Cable ready consumer electronics equipment. 15... Unintentional Radiators § 15.118 Cable ready consumer electronics equipment. (a) All consumer electronics TV... provisions of this section. Consumer electronics TV receiving equipment that includes features intended for...

47 CFR 15.118 - Cable ready consumer electronics equipment.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 1 2014-10-01 2014-10-01 false Cable ready consumer electronics equipment. 15... Unintentional Radiators § 15.118 Cable ready consumer electronics equipment. (a) All consumer electronics TV... provisions of this section. Consumer electronics TV receiving equipment that includes features intended for...

47 CFR 15.118 - Cable ready consumer electronics equipment.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 1 2013-10-01 2013-10-01 false Cable ready consumer electronics equipment. 15... Unintentional Radiators § 15.118 Cable ready consumer electronics equipment. (a) All consumer electronics TV... provisions of this section. Consumer electronics TV receiving equipment that includes features intended for...

Ranking product aspects through sentiment analysis of online reviews

NASA Astrophysics Data System (ADS)

Wang, Wei; Wang, Hongwei; Song, Yuan

2017-03-01

The electronic word-of-mouth (e-WOM) is one of the most important among all the factors affecting consumers' behaviours. Opinions towards a product through online reviews will influence purchase decisions of other online consumers by changing their perceptions on the product quality. Furthermore, each product aspect may impact consumers' intentions differently. Thus, sentiment analysis and econometric models are incorporated to examine the relationship between purchase intentions and aspect-opinion pairs, which enable the weight estimation for each product aspect. We first identify product aspects and reduce dimensions to extract aspect-opinion pairs. Next the information gain is calculated for each aspect through entropy theory. Based on sentiment polarity and sentiment strength, we formulate an econometric model by integrating the information gain to measure the aspect's weight. In the experiment, we track 386 digital cameras on Amazon for 39 months, and results show that the aspect weight for digital cameras is detected more precisely than TF-ID and HAC algorithms. The results will bridge product aspects and consumption intention to facilitate e-WOM-based marketing.

Injuries Associated With Hazards Involving Motor Vehicle Power Windows

DOT National Transportation Integrated Search

1997-05-01

National Highway Traffic Safety Administration's (NHTSA) National Center for : Statistics and Analysis (NCSA) recently completed a study of data from the : Consumer Product Safety Commission's (CPSC) National Electronic Injury : Surveillance System (...

A novel brominated triazine-based flame retardant (TTBP-TAZ) in plastic consumer products and indoor dust.

PubMed

Ballesteros-Gómez, Ana; de Boer, Jacob; Leonards, Pim E G

2014-04-15

The presence of a novel brominated flame retardant named 2,4,6-tris(2,4,6-tribromophenoxy)-1,3,5-triazine (TTBP-TAZ) is reported for the first time in plastic parts of consumer products and indoor dust samples. TTBP-TAZ was identified by untargeted screening and can be a replacement of the banned polybrominated diphenyl ethers. Analysis techniques based on ambient mass spectrometry and on liquid chromatography with atmospheric pressure chemical ionization combined with high resolution time-of-flight mass spectrometry were developed for the screening, detection and quantification of this low volatility and high molecular weight compound. TTBP-TAZ was present in 8 of 13 plastic parts of consumer products (from mainly electric and electronic equipment acquired in 2012) at estimated concentrations of 0.01-1.9% by weight of the product (%, w/w). It was not present in any of the older 13 plastic samples that were collected in a recycling park (manufacture date before 2006), this suggests a recent use of TTBP-TAZ. It was also found in 9 of 17 house dust samples in the range of 160-22150 ng g(-1), with the highest levels being found in samples collected on electronic and electrical equipment. These preliminary results highlight the need for further research on TTBP-TAZ and the potential of using alternative analysis methods for the identification of new flame retardants.

78 FR 33808 - Foreign-Trade Zone 50-Long Beach, California; Authorization of Production Activity; Panasonic...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-05

... DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B-13-2013] Foreign-Trade Zone 50--Long Beach, California; Authorization of Production Activity; Panasonic Corporation of North America (Kitting of Consumer Electronics); Anaheim, California On January 29, 2013, the Board of Harbor Commissioners of the Port of Long...

77 FR 4363 - Certain Dimmable Compact Fluorescent Lamps and Products Containing Same; Receipt of Complaint...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-27

.... of China; Feit Electric Company, Inc. of CA; General Electric Company of CT; Xiamen Topstar Lighting Co. Ltd. of China; Technical Consumer Products, Inc. of OH; TCP China of China; TCP (Shanghai) Tiancanbao Lighting of China; Shanghai Jensing Electron Electrical Equipment Co., Ltd. of China; Shanghai...

77 FR 3559 - Energy Conservation Program for Consumer Products: Test Procedures for Refrigerators...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-25

..., which is typical of an approach enabled by more sophisticated electronic controls. Id. The interim final... and long- time automatic defrost or variable defrost control and adjust the default values of maximum... accurate measurement of the energy use of products with variable defrost control. DATES: The amendments are...

Critical Review of Commercial Secondary Lithium-Ion Battery Safety Standards

NASA Astrophysics Data System (ADS)

Jones, Harry P.; Chapin, Thomas, J.; Tabaddor, Mahmod

2010-09-01

The development of Li-ion cells with greater energy density has lead to safety concerns that must be carefully assessed as Li-ion cells power a wide range of products from consumer electronics to electric vehicles to space applications. Documented field failures and product recalls for Li-ion cells, mostly for consumer electronic products, highlight the risk of fire, smoke, and even explosion. These failures have been attributed to the occurrence of internal short circuits and the subsequent thermal runaway that can lead to fire and explosion. As packaging for some applications include a large number of cells, the risk of failure is likely to be magnified. To address concerns about the safety of battery powered products, safety standards have been developed. This paper provides a review of various international safety standards specific to lithium-ion cells. This paper shows that though the standards are harmonized on a host of abuse conditions, most lack a test simulating internal short circuits. This paper describes some efforts to introduce internal short circuit tests into safety standards.

Wheelchair User Injuries and Deaths Associated with Motor Vehicle Related Incidents

DOT National Transportation Integrated Search

1997-09-01

National Highway Traffic Safety Administration's National Center for Statistics : and Analysis (NCSA) recently completed a study of data from the Consumer Product : Safety Commission's (CPSC) National Electronic Injury Surveillance System : (NEISS) o...

Case study on risk evaluation of printed electronics using nanosilver ink.

PubMed

Kim, Ellen; Lee, Ji Hyun; Kim, Jin Kwon; Lee, Gun Ho; Ahn, Kangho; Park, Jung Duck; Yu, Il Je

2016-01-01

With the ever-increasing development of nanotechnology, our society is being surrounded by possible risks related to exposure to manufactured nanomaterials. The consumer market already includes many products that contain silver nanoparticles (AgNPs), including various household products, such as yoga mats, cutting boards, running shirts, and socks. There is a growing concern over the release of AgNPs in workplaces related to the manufacture and application of nanomaterials. This study investigated the release of AgNPs during the operation of a printed electronics printer. Using an exposure simulation chamber, a nanoparticle collector, scanning mobility particle sizer (SMPS), condensation particle counter (CPC), dust monitor, and mixed cellulose ester (MCE) filters are all connected to measure the AgNP exposure levels when operating a printed electronics printer. A very small amount of AgNPs was released during the operation of the printed electronics printer, and the number of AgNPs inside the exposure simulation chamber was lower than that outside background. In addition, when evaluating the potential risks for consumers and workers using a margin of exposure (MOE) approach and target MOE of 1000, the operational results far exceeded the target MOE in this simulation study and in a previous workplace exposure study. The overall results indicate a no-risk concern level in the case of printed electronics using nanosilver ink.

Release of airborne particles and Ag and Zn compounds from nanotechnology-enabled consumer sprays: Implications for inhalation exposure

NASA Astrophysics Data System (ADS)

Calderón, Leonardo; Han, Taewon T.; McGilvery, Catriona M.; Yang, Letao; Subramaniam, Prasad; Lee, Ki-Bum; Schwander, Stephan; Tetley, Teresa D.; Georgopoulos, Panos G.; Ryan, Mary; Porter, Alexandra E.; Smith, Rachel; Chung, Kian Fan; Lioy, Paul J.; Zhang, Junfeng; Mainelis, Gediminas

2017-04-01

The increasing prevalence and use of nanotechnology-enabled consumer products have increased potential consumer exposures to nanoparticles; however, there is still a lack of data characterizing such consumer exposure. The research reported here investigated near-field airborne exposures due to the use of 13 silver (Ag)-based and 5 zinc (Zn)-based consumer sprays. The products were sprayed into a specially designed glove box, and all products were applied with equal spraying duration and frequency. Size distribution and concentration of the released particles were assessed using a Scanning Mobility Particle Sizer and an Aerodynamic Particle Sizer. Inductively coupled plasma mass spectrometry (ICP-MS) was used to investigate the presence of metals in all investigated products. Spray liquids and airborne particles from select products were examined using transmission electron microscopy (TEM) and Energy Dispersive X-ray Spectroscopy (EDS). We found that all sprays produced airborne particles ranging in size from nano-sized particles (<100 nm) to coarse particles (>2.5 μm); however, there was a substantial variation in the released particle concentration depending on a product. The total aerosol mass concentration was dominated by the presence of coarse particles, and it ranged from ∼30 μg/m3 to ∼30,000 μg/m3. The TEM verified the presence of nanoparticles and their agglomerates in liquid and airborne states. The products were found to contain not only Ag and Zn compounds - as advertised on the product labeling - but also a variety of other metals including lithium, strontium, barium, lead, manganese and others. The results presented here can be used as input to model population exposures as well as form a basis for human health effects studies due to the use nanotechnology-enabled products.

Assessment of end-of-life design in solid-state lighting

NASA Astrophysics Data System (ADS)

Dzombak, Rachel; Padon, Jack; Salsbury, Josh; Dillon, Heather

2017-08-01

Consumers in the US market and across the globe are beginning to widely adopt light emitting diode (LED) lighting products while the technology continues to undergo significant changes. While LED products are evolving to consume less energy, they are also more complex than traditional lighting products with a higher number of parts and a larger number of electronic components. Enthusiasm around the efficiency and long expected life span of LED lighting products is valid, but research to optimize product characteristics and design is needed. This study seeks to address that gap by characterizing LED lighting products' suitability for end of life (EOL) recycling and disposal. The authors disassembled and assessed 17 different lighting products to understand how designs differ between brands and manufacture year. Products were evaluated based on six parameters to quantify the design. The analysis indicates that while the efficiency of LED products has improved dramatically in the recent past, product designers and manufacturers could incorporate design strategies to improve environmental performance of lighting products at end-of-life.

Consumers with an intellectual disability and carers: perceptions of interactions with banks.

PubMed

Hayes, Susan C; Martin, Fiona B

2007-03-01

As more people with an intellectual disability reside independently in the community, there is both the need and the opportunity for them to use financial services, including banks and credit unions, and products such as cash machine cards, credit cards and loans. There is a dearth of information about interactions between consumers with intellectual disabilities and their carers, and financial service providers. This study investigated the perceptions of 94 consumers with an intellectual disability and 53 carers regarding interactions with financial service providers. Consumers and carers mentioned a number of problems with banks, and reported a low rate of successful resolution of these difficulties. Carers mentioned more problems than consumers, and more frequently reported intangible problems such as discrimination. The 'digital divide' was evident, with few consumers having access to Internet or telephone banking. People with intellectual disabilities need education programmes about electronic banking, their rights as consumers and their access to problem resolution strategies.

The Design of a Portable and Deployable Solar Energy System for Deployed Military Applications

DTIC Science & Technology

2011-04-01

Abstract- Global Positioning Systems, thermal imaging scopes, satellite phones, and other electronic devices are critical to the warfighter in... imaging scopes, satellite phones, and other electronic devices are critical to the warfighter in Forward Operating Environments. Many are battery operated...Technology & Engineering 24. Kumar, Shrawan, Mital, Anil, Electromyography in ergonomics 25. Stanton, Neville Human factors in consumer products, CRC

78 FR 30934 - Certain Consumer Electronics With Display and Processing Capabilities; Notice of Receipt of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-23

... INTERNATIONAL TRADE COMMISSION [Docket No 2956] Certain Consumer Electronics With Display and... the U.S. International Trade Commission has received a complaint entitled Certain Consumer Electronics... consumer electronics with display and processing capabilities. The complaint names as respondents Panasonic...

77 FR 44671 - Certain Wireless Consumer Electronics Devices and Components Thereof; Notice of Receipt of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-30

... INTERNATIONAL TRADE COMMISSION [Docket No. 2904] Certain Wireless Consumer Electronics Devices and.... International Trade Commission has received a complaint entitled Certain Wireless Consumer Electronics Devices... importation, and the sale within the United States after importation of certain wireless consumer electronics...

76 FR 66666 - Basic Service Tier Encryption Compatibility Between Cable Systems and Consumer Electronics Equipment

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-27

... 11-153] Basic Service Tier Encryption Compatibility Between Cable Systems and Consumer Electronics... substantially affect compatibility between cable service and consumer electronics equipment for most subscribers... problems between cable service and consumer electronics equipment were limiting and/or precluding the...

77 FR 67290 - Basic Service Tier Encryption Compatibility Between Cable Systems and Consumer Electronics Equipment

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-09

...-126] Basic Service Tier Encryption Compatibility Between Cable Systems and Consumer Electronics... between consumer electronics equipment (such as digital television sets) and newly encrypted cable service... Act''), Congress sought to make sure that consumer electronics equipment could receive cable...

Energy services in the information age: The convergence of energy, communications, and information technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Centolella, P.A.

1998-07-01

Most of the economic efficiency benefits of electric restructuring--consumer choice based on price and risk preferences, efficient capacity utilization, capacity expansion that reflects marketability, and innovative products--depend upon consumer access to information and opportunities to respond to time- and location-specific prices and customized products. Information and communications technologies from back-room data management centers to intelligent consumer gateways will play an essential role in marketing energy services in a retail access environment. This paper describes the role of information and communications technology in electric industry restructuring and retailing of energy services. It includes a survey of economic analyses on the likelymore » variability in competitive generation prices and consumer responses if such prices are effectively communicated. The paper describes the potential benefits and cost savings associated with flexible consumer responses to price variability. It identifies consumer loads and preferences. Finally, the paper describes the building blocks of information systems being developed to facilitate price-responsive energy management and provide a range of other energy services. Intelligent gateways, analytical tools for facility load prediction and optimizing energy management responses, and electronic commerce applications are discussed.« less

What do we know about the effects of exposure to 'Low alcohol' and equivalent product labelling on the amounts of alcohol, food and tobacco people select and consume? A systematic review.

PubMed

Shemilt, Ian; Hendry, Vivien; Marteau, Theresa M

2017-01-12

Explicit labelling of lower strength alcohol products could reduce alcohol consumption by attracting more people to buy and drink such products instead of higher strength ones. Alternatively, it may lead to more consumption due to a 'self-licensing' mechanism. Equivalent labelling of food or tobacco (for example "Low fat" or "Low tar") could influence consumption of those products by similar mechanisms. This systematic review examined the effects of 'Low alcohol' and equivalent labelling of alcohol, food and tobacco products on selection, consumption, and perceptions of products among adults. A systematic review was conducted based on Cochrane methods. Electronic and snowball searches identified 26 eligible studies. Evidence from 12 randomised controlled trials (all on food) was assessed for risk of bias, synthesised using random effects meta-analysis, and interpreted in conjunction with evidence from 14 non-randomised studies (one on alcohol, seven on food and six on tobacco). Outcomes assessed were: quantities of the product (i) selected or (ii) consumed (primary outcomes - behaviours), (iii) intentions to select or consume the product, (iv) beliefs associated with it consumption, (v) product appeal, and (vi) understanding of the label (secondary outcomes - cognitions). Evidence for impacts on the primary outcomes (i.e. amounts selected or consumed) was overall of very low quality, showing mixed effects, likely to vary by specific label descriptors, products and population characteristics. Overall very low quality evidence suggested that exposure to 'Low alcohol' and equivalent labelling on alcohol, food and tobacco products can shift consumer perceptions of products, with the potential to 'self-licence' excess consumption. Considerable uncertainty remains about the effects of labels denoting low alcohol, and equivalent labels, on alcohol, food and tobacco selection and consumption. Independent, high-quality studies are urgently needed to inform policies on labelling regulations.

Consumers' views on generic medicines: a review of the literature.

PubMed

Hassali, Mohamed A A; Shafie, Asrul A; Jamshed, Shazia; Ibrahim, Mohamed I M; Awaisu, Ahmed

2009-04-01

To review the literature on consumers' knowledge, attitudes and opinions of the use of generic medicines. A narrative review of studies conducted from 1970 to 2008 on consumers perceptions and views towards generic medicines was performed. An extensive literature search was undertaken using indexing services available at the authors' institution library. The following keywords were used for the search: brand, generic, multisource, medications, medicines, drugs, pharmaceuticals and consumers, customers, and patients. Electronic databases searched were Medline, Inside Web, ISI Web of Knowledge, Science Direct, Springer Link, JSTOR, Proquest, Ebsco Host and Google Scholar. These electronic databases were searched for full text papers published in English from 1970 to October 2008. Twenty studies were identified. Eleven were from the USA, four were from Europe, two were from Canada and one each was from Australia, Brazil and Malaysia. In general, consumers showed mixed reactions towards the use of generic medicines. This was evident from the divergence of views observed by country development level, consumers' socioeconomic characteristics, drug product characteristics, pharmaceutical reimbursement system, policy environment, contact with health care professionals, past experience with medications, and knowledge of the seriousness of a medical condition. Patient confidence and knowledge pertaining to generic medicines use have increased over the past four decades, especially in developed countries. Mass educational efforts, financial incentives, and greater communication among patients and health care professionals were seen as major drivers to the uptake of generic medicines among consumers.

Production of Methane During Anaerobic Degradation of Ethanol in Gasoline

EPA Science Inventory

Field and laboratory studies show that the natural biodegradation of benzene may be inhibited by the presence of ethanol. Preferential biodegradation of ethanol can consume electron acceptors such as sulfate, nitrate, or oxygen that are needed for BTEX biodegradation. An additi...

Magnetic Thin Films for Perpendicular Magnetic Recording Systems

NASA Astrophysics Data System (ADS)

Sugiyama, Atsushi; Hachisu, Takuma; Osaka, Tetsuya

In the advanced information society of today, information storage technology, which helps to store a mass of electronic data and offers high-speed random access to the data, is indispensable. Against this background, hard disk drives (HDD), which are magnetic recording devices, have gained in importance because of their advantages in capacity, speed, reliability, and production cost. These days, the uses of HDD extend not only to personal computers and network servers but also to consumer electronics products such as personal video recorders, portable music players, car navigation systems, video games, video cameras, and personal digital assistances.

E-WOM Review Adoption: Consumers’ Demographic Profile Influence on Green Purchase Intention

NASA Astrophysics Data System (ADS)

Rahim, Roslin Abdul; Sulaiman, Zuraidah; Chin, Thoo Ai; Arif, Mohd Shoki Mohd; Hamid, Mohd Hakim Abdul

2017-06-01

Nowadays, green products are getting popular in their acceptance by the Malaysian consumers. Due to the advancement of the Internet technologies and the wide spread of electronic word of mouth (E-WOM), consumers seem to be more influenced in purchasing the green products. In this study, consumers’ demographic profiles, such as age, gender, income, education background, and occupation are being explored to investigate their influences on consumers’ green product purchase intention. The purpose of this paper is to showcase the results of the differences between several demographic profile groups on green product purchase intention using descriptive analysis, ANOVA and independent sample T-Test. T-test results showed that there is a statistically significant difference between gender on consumers’ green product purchase intention. Meanwhile, the results generated by ANOVA indicated that there are no significant differences between age, income, education background and occupation on consumers’ green product purchase intention. These results shed light on the potential market segment that should be targeted by marketers and producers of green products in Malaysia.

How consumers evaluate eWOM (electronic word-of-mouth) messages.

PubMed

Doh, Sun-Jae; Hwang, Jang-Sun

2009-04-01

This experiment explored how consumers evaluate electronic word-of-mouth (eWOM) messages about products. Each participant was exposed a 10-message set in a single board. Five groups were manipulated in terms of their ratios of positive and negative messages. The result showed significant differences across various sets of eWOM messages. Although more positive sets showed higher scores in many cases, this was not true in all situations, especially for the case of credibility. Involvement and prior knowledge partially moderated the relationship between the ratio of messages and the eWOM effect. The credibility of Web sites and eWOM messages can be damaged in the long run if all of the eWOM messages are positive.

Reducing chemical exposures at home: opportunities for action

PubMed Central

Zota, Ami R; Singla, Veena; Adamkiewicz, Gary; Mitro, Susanna D; Dodson, Robin E

2017-01-01

Indoor environments can influence human environmental chemical exposures and, ultimately, public health. Furniture, electronics, personal care and cleaning products, floor coverings and other consumer products contain chemicals that can end up in the indoor air and settled dust. Consumer product chemicals such as phthalates, phenols, flame retardants and per- and polyfluorinated alkyl substances are widely detected in the US general population, including vulnerable populations, and are associated with adverse health effects such as reproductive and endocrine toxicity. We discuss the implications of our recent meta-analysis describing the patterns of chemical exposures and the ubiquity of multiple chemicals in indoor environments. To reduce the likelihood of exposures to these toxic chemicals, we then discuss approaches for exposure mitigation: targeting individual behaviour change, household maintenance and purchasing decisions, consumer advocacy and corporate responsibility in consumer markets, and regulatory action via state/federal policies. There is a need to further develop evidence-based strategies for chemical exposure reduction in each of these areas, given the multi-factorial nature of the problem. Further identifying those at greatest risk; understanding the individual, household and community factors that influence indoor chemical exposures; and developing options for mitigation may substantially improve individuals’ exposures and health. PMID:28756396

Search and Pursuit with Unmanned Aerial Vehicles in Road Networks

DTIC Science & Technology

2013-11-01

production volume in each area for use in consumer electronics. Simultaneously, a shift in defense strategy towards unmanned vehicles, particularly...Vöcking. Randomized pursuit-evasion in graphs. Combinatorics, Probability and Computing, 12:225–244, May 2003. [3] AeroVironment Inc. Raven Product Data...Ali and Mubarak Shah. COCOA - tracking in aerial imagery. In SPIE Airborne Intelligence, Surveillance, Reconnaissance Systems and Applications, 2006

16 CFR § 1500.88 - Exemptions from lead limits under section 101 of the Consumer Product Safety Improvement Act for...

Code of Federal Regulations, 2013 CFR

2013-01-01

.... (9) Lead oxide in the glass envelope of Black Light Blue (BLB) lamps. (e) Components of electronic devices that are removable or replaceable, such as battery packs and light bulbs that are inaccessible...

16 CFR 1500.88 - Exemptions from lead limits under section 101 of the Consumer Product Safety Improvement Act for...

Code of Federal Regulations, 2012 CFR

2012-01-01

.... (9) Lead oxide in the glass envelope of Black Light Blue (BLB) lamps. (e) Components of electronic devices that are removable or replaceable, such as battery packs and light bulbs that are inaccessible...

16 CFR 1500.88 - Exemptions from lead limits under section 101 of the Consumer Product Safety Improvement Act for...

Code of Federal Regulations, 2011 CFR

2011-01-01

.... (9) Lead oxide in the glass envelope of Black Light Blue (BLB) lamps. (e) Components of electronic devices that are removable or replaceable, such as battery packs and light bulbs that are inaccessible...

16 CFR 1500.88 - Exemptions from lead limits under section 101 of the Consumer Product Safety Improvement Act for...

Code of Federal Regulations, 2014 CFR

2014-01-01

.... (9) Lead oxide in the glass envelope of Black Light Blue (BLB) lamps. (e) Components of electronic devices that are removable or replaceable, such as battery packs and light bulbs that are inaccessible...

Acute and Developmental Behavioral Effects of Flame Retardants and Related Chemicals in Zebrafish

EPA Science Inventory

As polybrominated diphenyl ethers are phased out, numerous compounds are emerging as potential replacement flame retardants for use in consumer and electronic products. Little is known, however, about the neurobehavioral toxicity of these replacements. This study evaluated the ne...

78 FR 4848 - Social Media: Consumer Compliance Risk Management Guidance

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-23

... third- party service provider relationships in connection with social media; An employee training... managing compliance, and training for appropriate personnel. These controls should apply to all customers, products and services, including customers engaging in electronic banking (e-banking) through the use of...

Microelectronics in Japan

NASA Astrophysics Data System (ADS)

Boulton, William R.

1995-02-01

The purpose of this JTEC study is to evaluate Japan's electronic manufacturing and packaging capabilities within the context of global economic competition. To carry out this study, the JTEC panel evaluated the framework of the Japanese consumer electronics industry and various technological and organizational factors that are likely to determine who will win and lose in the marketplace. This study begins with a brief overview of the electronics industry, especially as it operates in Japan today. Succeeding chapters examine the electronics infrastructure in Japan and take an in-depth look at the central issues of product development in order to identify those parameters that will determine future directions for electronic packaging technologies.

Microelectronics in Japan

NASA Technical Reports Server (NTRS)

Boulton, William R.

1995-01-01

The purpose of this JTEC study is to evaluate Japan's electronic manufacturing and packaging capabilities within the context of global economic competition. To carry out this study, the JTEC panel evaluated the framework of the Japanese consumer electronics industry and various technological and organizational factors that are likely to determine who will win and lose in the marketplace. This study begins with a brief overview of the electronics industry, especially as it operates in Japan today. Succeeding chapters examine the electronics infrastructure in Japan and take an in-depth look at the central issues of product development in order to identify those parameters that will determine future directions for electronic packaging technologies.

Variations in Label Information and Nicotine Levels in Electronic Cigarette Refill Liquids in South Korea: Regulation Challenges

PubMed Central

Kim, Sungroul; Goniewicz, Maciej L.; Yu, Sol; Kim, Bokyeong; Gupta, Ribhav

2015-01-01

Background: In South Korea, the consumption of liquid nicotine used in electronic cigarettes has dramatically increased from 4310 L in 2012 to 7220 L in 2013. This study aimed to examine the level of heterogeneity of contents of the labels and discrepancy of the nicotine content between that indicated on the label and the actual values for electronic cigarette liquid refill products in South Korea. Methods: We purchased 32 electronic cigarette liquid refill products (17 Korean domestic, 15 imported ones) and one pure nicotine product at six different electronic cigarette retail stores in Seoul between May and June 2014. The actual nicotine concentrations of each product were measured by a blinded analyst at Roswell Park Cancer Institute, Buffalo, NY, USA. Results: Three out of 15 imported liquid refill products provided manufacturing dates, while expiration dates were available on eight products. The range of nicotine concentration was from “not detected” to 17.5 mg/mL. Labeling discrepancies of the concentrations ranged from −32.2% to 3.3% among electronic cigarette liquid refill products. The highest concentration (150.3 ± 7.9 mg/mL) was found in a sample labeled as “pure nicotine”. Conclusions: There is no standardization of labelling among electronic cigarette liquids sampled from retail stores and the labels did not accurately reflect the content. One product labeled “pure nicotine” raises concerns, since it may be poisonous to consumers, especially to children. This study revealed the urgent need for the development of product regulations in South Korea. PMID:25950652

Silver nanoparticle ink technology: state of the art

PubMed Central

Rajan, Krishna; Roppolo, Ignazio; Chiappone, Annalisa; Bocchini, Sergio; Perrone, Denis; Chiolerio, Alessandro

2016-01-01

Printed electronics will bring to the consumer level great breakthroughs and unique products in the near future, shifting the usual paradigm of electronic devices and circuit boards from hard boxes and rigid sheets into flexible thin layers and bringing disposable electronics, smart tags, and so on. The most promising tool to achieve the target depends upon the availability of nanotechnology-based functional inks. A certain delay in the innovation-transfer process to the market is now being observed. Nevertheless, the most widely diffused product, settled technology, and the highest sales volumes are related to the silver nanoparticle-based ink market, representing the best example of commercial nanotechnology today. This is a compact review on synthesis routes, main properties, and practical applications. PMID:26811673

Silver nanoparticle ink technology: state of the art.

PubMed

Rajan, Krishna; Roppolo, Ignazio; Chiappone, Annalisa; Bocchini, Sergio; Perrone, Denis; Chiolerio, Alessandro

2016-01-01

Printed electronics will bring to the consumer level great breakthroughs and unique products in the near future, shifting the usual paradigm of electronic devices and circuit boards from hard boxes and rigid sheets into flexible thin layers and bringing disposable electronics, smart tags, and so on. The most promising tool to achieve the target depends upon the availability of nanotechnology-based functional inks. A certain delay in the innovation-transfer process to the market is now being observed. Nevertheless, the most widely diffused product, settled technology, and the highest sales volumes are related to the silver nanoparticle-based ink market, representing the best example of commercial nanotechnology today. This is a compact review on synthesis routes, main properties, and practical applications.

Consumer preferences for electronic cigarettes: results from a discrete choice experiment.

PubMed

Czoli, Christine D; Goniewicz, Maciej; Islam, Towhidul; Kotnowski, Kathy; Hammond, David

2016-04-01

E-cigarettes present a formidable challenge to regulators given their variety and the rapidly evolving nicotine market. The current study sought to examine the influence of e-cigarette product characteristics on consumer perceptions and trial intentions among Canadians. An online discrete choice experiment was conducted with 915 Canadians aged 16 years and older in November 2013. An online commercial panel was used to sample 3 distinct subpopulations: (1) non-smoking youth and young adults (n=279); (2) smoking youth and young adults (n=264) and (3) smoking adults (n=372). Participants completed a series of stated-preference tasks, in which they viewed choice sets with e-cigarette product images that featured different combinations of attributes: flavour, nicotine content, health warnings and price. For each choice set, participants were asked to select one of the products or indicate 'none of the above' with respect to the following outcomes: interest in trying, less harm and usefulness in quitting smoking. The attributes' impact on consumer choice for each outcome was analysed using multinomial logit regression. Health warning was the most important attribute influencing participants' intentions to try e-cigarettes (42%) and perceived efficacy as a quit aid (39%). Both flavour (36%) and health warnings (35%) significantly predicted perceptions of product harm. The findings indicate that consumers make trade-offs with respect to e-cigarette product characteristics, and that these trade-offs vary across different subpopulations. Given that health warnings and flavour were weighted most important by consumers in this study, these may represent good targets for e-cigarette regulatory frameworks. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Consumers' Use of Personal Electronic Devices in the Kitchen.

PubMed

Lando, Amy M; Bazaco, Michael C; Chen, Yi

2018-02-23

Smartphones, tablets, and other personal electronic devices have become ubiquitous in Americans' daily lives. These devices are used by people throughout the day, including while preparing food. For example, a device may be used to look at recipes and therefore be touched multiple times during food preparation. Previous research has indicated that cell phones can harbor bacteria, including opportunistic human pathogens such as Staphylococcus and Klebsiella spp. This investigation was conducted with data from the 2016 Food Safety Survey (FSS) and from subsequent focus groups to determine the frequency with which consumers use personal electronic devices in the kitchen while preparing food, the types of devices used, and hand washing behaviors after handling these devices. The 2016 FSS is the seventh wave of a repeated cross-sectional survey conducted by the U.S. Food and Drug Administration in collaboration with the U.S. Department of Agriculture. The goal of the FSS is to evaluate U.S. adult consumer attitudes, behaviors, and knowledge about food safety. The FSS included 4,169 adults that were contacted using a dual-frame (land line and cell phone interviews) random-digit-dial sampling process. The personal electronics module was the first of three food safety topics discussed by each of eight consumer focus groups, which were convened in four U.S. cities in fall 2016. Results from the 2016 FSS revealed that of those individuals who use personal electronic devices while cooking, only about one third reported washing hands after touching the device and before continuing cooking. This proportion is significantly lower than that for self-reported hand washing behaviors after touching risky food products such as raw eggs, meat, chicken, or fish. Results from the focus groups highlight the varied usage of these devices during food preparation and the related strategies consumers are using to incorporate personal electric devices into their cooking routines.

Consumers' Preferences for Electronic Nicotine Delivery System Product Features: A Structured Content Analysis.

PubMed

Kistler, Christine E; Crutchfield, Trisha M; Sutfin, Erin L; Ranney, Leah M; Berman, Micah L; Zarkin, Gary A; Goldstein, Adam O

2017-06-07

To inform potential governmental regulations, we aimed to develop a list of electronic nicotine delivery system (ENDS) product features important to U.S. consumers by age and gender. We employed qualitative data methods. Participants were eligible if they had used an ENDS at least once. Groups were selected by age and gender (young adult group aged 18-25, n = 11; middle-age group aged 26-64, n = 9; and women's group aged 26-64, n = 9). We conducted five individual older adult interviews (aged 68-80). Participants discussed important ENDS features. We conducted a structured content analysis of the group and interview responses. Of 34 participants, 68% were white and 56% were female. Participants mentioned 12 important ENDS features, including: (1) user experience; (2) social acceptability; (3) cost; (4) health risks/benefits; (5) ease of use; (6) flavors; (7) smoking cessation aid; (8) nicotine content; (9) modifiability; (10) ENDS regulation; (11) bridge between tobacco cigarettes; (12) collectability. The most frequently mentioned ENDS feature was modifiability for young adults, user experience for middle-age and older adults, and flavor for the women's group. This study identified multiple features important to ENDS consumers. Groups differed in how they viewed various features by age and gender. These results can inform ongoing regulatory efforts.

Gold Nanomaterials in Consumer Cosmetics Nanoproducts: Analyses, Characterization, and Dermal Safety Assessment.

PubMed

Cao, Mingjing; Li, Jiayang; Tang, Jinglong; Chen, Chunying; Zhao, Yuliang

2016-10-01

Establishment of analytical methods of engineered nanomaterials in consumer products for their human and environmental risk assessment becomes urgent for both academic and industrial needs. Owing to the difficulties and challenges around nanomaterials in complex media, proper chemical separation and biological assays of nanomaterials from nanoproducts needs to be firstly developed. Herein, a facile and rapid method to separate and analyze gold nanomaterials in cosmetics is reported. Gold nanomaterials are successfully separated from different facial or eye creams and their physiochemical properties are analyzed by quantitative and qualitative state-of-the art techniques with high sensitivity or high spatial resolution. In turn, a protocol including quantification of gold by inductively coupled plasma mass spectrometry and thorough characterization of morphology, size distribution, and surface property by electron microscopes, atomic force microscope, and X-ray photoelectron spectroscope is developed. Subsequently, the preliminary toxicity assessment indicates that gold nanomaterials in cosmetic creams have no observable toxicity to human keratinocytes even after 24 h exposure up to a concentration of 200 μg mL -1 . The environmental scanning electron microscope reveals that gold nanomaterials are mostly attached on the cell membrane. Thus, the present study provides a full analysis protocol for toxicity assessment of gold nanomaterials in consumer products (cosmetic creams). © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

What to consider when regulating electronic cigarettes: Pros, cons and unintended consequences.

PubMed

Caponnetto, Pasquale; Saitta, Daniela; Sweanor, David; Polosa, Riccardo

2015-06-01

Many public health experts, medical research societies, large health organizations and policy makers have expressed concerns about the increased popularity of electronic cigarettes and have pushed for more restrictive measures ranging from complete bans to tight regulations of these products either as medicines or as tobacco products. But these concerns have never been adequately qualified nor quantified. Without judicious assessment and thorough evaluation, regulations may have unintended consequences that can do more damage than good in public health terms. In this article, we will appraise the existing prominent regulatory frameworks for e-cigarettes, namely, general consumer product, medicinal product and tobacco product regulation, to highlight their pros and cons. Moreover, we provide concrete examples of the unintended consequences which may arise from inappropriate regulatory action. Copyright © 2015 Elsevier B.V. All rights reserved.

Bromine in plastic consumer products - Evidence for the widespread recycling of electronic waste.

PubMed

Turner, Andrew; Filella, Montserrat

2017-12-01

A range of plastic consumer products and components thereof have been analysed by x-ray fluorescence (XRF) spectrometry in a low density mode for Br as a surrogate for brominated flame retardant (BFR) content. Bromine was detected in about 42% of 267 analyses performed on electronic (and electrical) samples and 18% of 789 analyses performed on non-electronic samples, with respective concentrations ranging from 1.8 to 171,000μgg -1 and 2.6 to 28,500μgg -1 . Amongst the electronic items, the highest concentrations of Br were encountered in relatively small appliances, many of which predated 2005 (e.g. a fan heater, boiler thermostat and smoke detector, and various rechargers, light bulb collars and printed circuit boards), and usually in association with Sb, a component of antimony oxide flame retardant synergists, and Pb, a heavy metal additive and contaminant. Amongst the non-electronic samples, Br concentrations were highest in items of jewellery, a coffee stirrer, a child's puzzle, a picture frame, and various clothes hangers, Christmas decorations and thermos cup lids, and were often associated with the presence of Sb and Pb. These observations, coupled with the presence of Br at concentrations below those required for flame-retardancy in a wider range of electronic and non-electronic items, are consistent with the widespread recycling of electronic plastic waste. That most Br-contaminated items were black suggests the current and recent demand for black plastics in particular is met, at least partially, through this route. Given many Br-contaminated items would evade the attention of the end-user and recycler, their disposal by conventional municipal means affords a course of BFR entry into the environment and, for food-contact items, a means of exposure to humans. Copyright © 2017 Elsevier B.V. All rights reserved.

77 FR 18860 - Certain Consumer Electronics, Including Mobile Phones and Tablets; Notice of Receipt of Complaint...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-28

... INTERNATIONAL TRADE COMMISSION [DN 2885] Certain Consumer Electronics, Including Mobile Phones and.... International Trade Commission has received a complaint entitled Certain Consumer Electronics, Including Mobile... electronics, including mobile phones and tablets. The complaint names as respondents ASUSTeK Computer, Inc. of...

78 FR 38072 - Certain Consumer Electronics With Display and Processing Capabilities; Institution of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-25

... INTERNATIONAL TRADE COMMISSION [Inv. No. 337-TA-884] Certain Consumer Electronics With Display and... electronics with display and processing capabilities by reason of infringement of U.S. Patent No. 6,650,327... after importation of certain consumer electronics with display and processing capabilities by reason of...

Bioavailability of HBCD/TBB/TBPH from dust and oil vehicles in Sprague-Dawley rats

USDA-ARS?s Scientific Manuscript database

Recent data have revealed that homes, offices and cars are often more polluted with environmental contaminants than the outdoors due to high use of textiles, electronics, and insulation that are treated with brominated flame retardants (BFRs). BFRs volatilize and/or weather from consumer products a...

Evaluating Thyroxine Metabolism and Transport in Primary Rat and Human Hepatocytes Following BDE 47 Exposure

EPA Science Inventory

Polybrominated diphenyl ethers (PBDEs) are a class of flame retardants used in various consumer products including polyurethane foam, electronics, and textile coating. 2,2’,4,4’-Tetrabromodiphenyl ether (BDE 47) is the predominant PBDE congener accounting for half of...

77 FR 4544 - CPSC Symposium on Phthalates Screening and Testing Methods

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-30

... Screening and Testing Methods AGENCY: Consumer Product Safety Commission. ACTION: Notice. SUMMARY: The... symposium on phthalates screening and testing methods. The symposium will be held at the CPSC's National... submit comments, identified by Docket No. CPSC-2012-0008, by any of the following methods: Electronic...

17 CFR 248.126 - Delivery of opt out notices.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 17 Commodity and Securities Exchanges 4 2014-04-01 2014-04-01 false Delivery of opt out notices. 248.126 Section 248.126 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION... Internet Web site at which the consumer obtained a product or service electronically and requires the...

17 CFR 248.126 - Delivery of opt out notices.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 17 Commodity and Securities Exchanges 3 2012-04-01 2012-04-01 false Delivery of opt out notices. 248.126 Section 248.126 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION... Internet Web site at which the consumer obtained a product or service electronically and requires the...

17 CFR 248.126 - Delivery of opt out notices.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 17 Commodity and Securities Exchanges 3 2013-04-01 2013-04-01 false Delivery of opt out notices. 248.126 Section 248.126 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION... Internet Web site at which the consumer obtained a product or service electronically and requires the...

17 CFR 248.126 - Delivery of opt out notices.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 17 Commodity and Securities Exchanges 3 2011-04-01 2011-04-01 false Delivery of opt out notices. 248.126 Section 248.126 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION... Internet Web site at which the consumer obtained a product or service electronically and requires the...

The Electronic Portfolio: Ethical Considerations

ERIC Educational Resources Information Center

McFadden, Joan R.; Saiki, Diana

2005-01-01

Computer technology has become important in Family and Consumer Science (FCS) because it offers improved communication with capabilities such as the Internet that allows for a "more productive workplace" (Jones, 2003, p. 38). Kittross and Gordon (2003) alerted users that as computer technology evolves, there is a need for colleges and universities…

Remix and Reuse of Source Code in Software Production

ERIC Educational Resources Information Center

Jones, M. Cameron

2010-01-01

The means of producing information and the infrastructure for disseminating it are constantly changing. The web mobilizes information in electronic formats, making it easier to copy, modify, remix, and redistribute. This has changed how information is produced, distributed, and used. People are not just consuming information; they are actively…

Optical gesture sensing and depth mapping technologies for head-mounted displays: an overview

NASA Astrophysics Data System (ADS)

Kress, Bernard; Lee, Johnny

2013-05-01

Head Mounted Displays (HMDs), and especially see-through HMDs have gained renewed interest in recent time, and for the first time outside the traditional military and defense realm, due to several high profile consumer electronics companies presenting their products to hit market. Consumer electronics HMDs have quite different requirements and constrains as their military counterparts. Voice comments are the de-facto interface for such devices, but when the voice recognition does not work (not connection to the cloud for example), trackpad and gesture sensing technologies have to be used to communicate information to the device. We review in this paper the various technologies developed today integrating optical gesture sensing in a small footprint, as well as the various related 3d depth mapping sensors.

Nanosized aerosols from consumer sprays: experimental analysis and exposure modeling for four commercial products

NASA Astrophysics Data System (ADS)

Lorenz, Christiane; Hagendorfer, Harald; von Goetz, Natalie; Kaegi, Ralf; Gehrig, Robert; Ulrich, Andrea; Scheringer, Martin; Hungerbühler, Konrad

2011-08-01

Consumer spray products are already on the market in the cosmetics and household sector, which suggest by their label that they contain engineered nanoparticles (ENP). Sprays are considered critical for human health, because the lungs represent a major route for the uptake of ENP into the human body. To contribute to the exposure assessment of ENP in consumer spray products, we analyzed ENP in four commercially available sprays: one antiperspirant, two shoe impregnation sprays, and one plant-strengthening agent. The spray dispersions were analyzed by inductively coupled plasma mass spectrometry (ICPMS) and (scanning-) transmission electron microscopy ((S)TEM). Aerosols were generated by using the original vessels, and analyzed by scanning mobility particle sizer (SMPS) and (S)TEM. On the basis of SMPS results, the nanosized aerosol depositing in the respiratory tract was modeled for female and male consumers. The derived exposure levels reflect a single spray application. We identified ENP in the dispersions of two products (shoe impregnation and plant spray). Nanosized aerosols were observed in three products that contained propellant gas. The aerosol number concentration increased linearly with the sprayed amount, with the highest concentration resulting from the antiperspirant. Modeled aerosol exposure levels were in the range of 1010 nanosized aerosol components per person and application event for the antiperspirant and the impregnation sprays, with the largest fraction of nanosized aerosol depositing in the alveolar region. Negligible exposure from the application of the plant spray (pump spray) was observed.

Factors associated with the hospital admission of consumer product-related injuries treated in U.S. hospital emergency departments.

PubMed

Schroeder, Thomas J; Rodgers, Gregory B

2013-10-01

While unintentional injuries and hazard patterns involving consumer products have been studied extensively in recent years, little attention has focused on the characteristics of those who are hospitalized after treatment in emergency departments, as opposed to those treated and released. This study quantifies the impact of the age and sex of the injury victims, and other factors, on the likelihood of hospitalization. The analysis focuses on consumer product injuries, and was based on approximately 400,000 injury cases reported through the U.S. Consumer Product Safety Commission's National Electronic Injury Surveillance System, a national probability sample of U.S. hospital emergency departments. Logistic regression was used to quantify the factors associated with the likelihood of hospitalization. The analysis suggests a smooth U-shaped relationship between the age of the victim and the likelihood of hospitalization, declining from about 3.4% for children under age 5 years to 1.9% for 15-24 year-olds, but then rising to more than 25% for those ages 75 years and older. The likelihood of hospitalization was also significantly affected by the victim's sex, as well as by the types of products involved, fire involvement, and the size and type of hospital at which the injury was treated. This study shows that the probability of hospitalization is strongly correlated with the characteristics of those who are injured, as well as other factors. Published by Elsevier Ltd.

77 FR 51572 - Certain Wireless Consumer Electronics Devices and Components Thereof; Institution of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-24

... Electronics Devices and Components Thereof; Institution of Investigation Pursuant to 19 U.S.C. 1337 AGENCY: U... importation of certain wireless consumer electronics devices and components thereof by reason of infringement... wireless consumer electronics devices and components thereof that infringe one or more of claims 1, 6, 7, 9...

47 CFR 76.630 - Compatibility with consumer electronics equipment.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false Compatibility with consumer electronics equipment. 76.630 Section 76.630 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST... Compatibility with consumer electronics equipment. (a) Cable system operators shall not scramble or otherwise...

47 CFR 76.630 - Compatibility with consumer electronics equipment.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 4 2011-10-01 2011-10-01 false Compatibility with consumer electronics equipment. 76.630 Section 76.630 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST... Compatibility with consumer electronics equipment. (a) Cable system operators shall not scramble or otherwise...

47 CFR 76.630 - Compatibility with consumer electronics equipment.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 4 2014-10-01 2014-10-01 false Compatibility with consumer electronics equipment. 76.630 Section 76.630 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST... Compatibility with consumer electronics equipment. (a) Cable system operators shall not scramble or otherwise...

47 CFR 76.630 - Compatibility with consumer electronics equipment.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 4 2013-10-01 2013-10-01 false Compatibility with consumer electronics equipment. 76.630 Section 76.630 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST... Compatibility with consumer electronics equipment. (a) Cable system operators shall not scramble or otherwise...

47 CFR 76.630 - Compatibility with consumer electronics equipment.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 4 2012-10-01 2012-10-01 false Compatibility with consumer electronics equipment. 76.630 Section 76.630 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST... Compatibility with consumer electronics equipment. (a) Cable system operators shall not scramble or otherwise...

Microbial Electrochemistry and its Application to Energy and Environmental Issues

NASA Astrophysics Data System (ADS)

Hastings, Jason Thomas

Microbial electrochemistry forms the basis of a wide range of topics from microbial fuel cells to fermentation of carbon food sources. The ability to harness microbial electron transfer processes can lead to a greener and cleaner future. This study focuses on microbial electron transfer for liquid fuel production, novel electrode materials, subsurface environments and removal of unwanted byproducts. In the first chapter, exocellular electron transfer through direct contact utilizing passive electrodes for the enhancement of bio-fuel production was tested. Through the application of microbial growth in a 2-cell apparatus on an electrode surface ethanol production was enhanced by 22.7% over traditional fermentation. Ethanol production efficiencies of close to 95% were achieved in a fraction of the time required by traditional fermentation. Also, in this chapter, the effect of exogenous electron shuttles, electrode material selection and resistance was investigated. Power generation was observed using the 2-cell passive electrode system. An encapsulation method, which would also utilize exocellular transfer of electrons through direct contact, was hypothesized for the suspension of viable cells in a conductive polymer substrate. This conductive polymer substrate could have applications in bio-fuel production. Carbon black was added to a polymer solution to test electrospun polymer conductivity and cell viability. Polymer morphology and cell viability were imaged using electron and optical microscopy. Through proper encapsulation, higher fuel production efficiencies would be achievable. Electron transfer through endogenous exocellular protein shuttles was observed in this study. Secretion of a soluble redox active exocellular protein by Clostridium sp. have been shown utilizing a 2-cell apparatus. Cyclic voltammetry and gel electrophoresis were used to show the presence of the protein. The exocellular protein is capable of reducing ferrous iron in a membrane separated chamber. In experiments where the redox active protein was allowed to pass through the permeable membrane, iron dissolution was 14-fold greater than experiments where the protein was held to one chamber by a non-permeable membrane. Confirmation of a redox active protein could reshape or understanding of subsurface redox processes. The final topic in this study discusses electron transfer within the cell for production of fermentation products. Glycerol, which is an unwanted side-product of biodiesel transesterfication, is utilized as a carbon source for fermentation. Bacterial samples harvested from Galena Creek soil (NGC) are shown in this study to be efficient consumers of glycerol. NGC microbe was characterized through 16s rDNA genetic sequencing and determined to belong to genus Clostridium. Clostridium NGC was able to consume glycerol at 29.7gpl within 72hrs grown in a media containing 50gpl glycerol. All observed fermentation metabolites were characterized and quantified through an HPLC. Glycerol consumption rates and metabolite production rates were observed using varying media recipes. This study has found that NGC has higher selectivity for low weight acids at lower yeast extract concentration and higher selectivity for larger acids and alcohols at higher yeast extract concentrations.

12 CFR 1005.7 - Initial disclosures.

Code of Federal Regulations, 2012 CFR

2012-01-01

... disclosures required by this section at the time a consumer contracts for an electronic fund transfer service or before the first electronic fund transfer is made involving the consumer's account. (b) Content of... Banks and Banking BUREAU OF CONSUMER FINANCIAL PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E...

Materials and applications of bioresorbable electronics

NASA Astrophysics Data System (ADS)

Huang, Xian

2018-01-01

Bioresorbable electronics is a new type of electronics technology that can potentially lead to biodegradable and dissolvable electronic devices to replace current built-to-last circuits predominantly used in implantable devices and consumer electronics. Such devices dissolve in an aqueous environment in time periods from seconds to months, and generate biological safe products. This paper reviews materials, fabrication techniques, and applications of bioresorbable electronics, and aims to inspire more revolutionary bioresorbable systems that can generate broader social and economic impact. Existing challenges and potential solutions in developing bioresorbable electronics have also been presented to arouse more joint research efforts in this field to build systematic technology framework. Project supported by the National Natural Science Foundation of China (No. 61604108) and the Natural Science Foundation of Tianjin (No. 16JCYBJC40600).

Correlated Raman micro-spectroscopy and scanning electron microscopy analyses of flame retardants in environmental samples: a micro-analytical tool for probing chemical composition, origin and spatial distribution.

PubMed

Ghosal, Sutapa; Wagner, Jeff

2013-07-07

We present correlated application of two micro-analytical techniques: scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS) and Raman micro-spectroscopy (RMS) for the non-invasive characterization and molecular identification of flame retardants (FRs) in environmental dusts and consumer products. The SEM/EDS-RMS technique offers correlated, morphological, molecular, spatial distribution and semi-quantitative elemental concentration information at the individual particle level with micrometer spatial resolution and minimal sample preparation. The presented methodology uses SEM/EDS analyses for rapid detection of particles containing FR specific elements as potential indicators of FR presence in a sample followed by correlated RMS analyses of the same particles for characterization of the FR sub-regions and surrounding matrices. The spatially resolved characterization enabled by this approach provides insights into the distributional heterogeneity as well as potential transfer and exposure mechanisms for FRs in the environment that is typically not available through traditional FR analysis. We have used this methodology to reveal a heterogeneous distribution of highly concentrated deca-BDE particles in environmental dust, sometimes in association with identifiable consumer materials. The observed coexistence of deca-BDE with consumer material in dust is strongly indicative of its release into the environment via weathering/abrasion of consumer products. Ingestion of such enriched FR particles in dust represents a potential for instantaneous exposure to high FR concentrations. Therefore, correlated SEM/RMS analysis offers a novel investigative tool for addressing an area of important environmental concern.

Microbial production of hydrogen and ethanol from glycerol-containing wastes discharged from a biodiesel fuel production plant in a bioelectrochemical reactor with thionine.

PubMed

Sakai, Shinsuke; Yagishita, Tatsuo

2007-10-01

H(2) and ethanol production from glycerol-containing wastes discharged from a biodiesel fuel production plant by Enterobacter aerogenes NBRC 12010 was demonstrated in bioelectrochemical cells. Thionine as an exogenous electron transfer mediator was reduced by E. aerogenes, and was re-oxidized by a working electrode applied at +0.2 V against a Ag/AgCl reference electrode by a potentiostat (electrode system). At the initial glycerol concentration of 110 mM, 92.9 mM glycerol was consumed in the electrode system with 2 mM thionine after 48 h. On the other hand, the concentration of glycerol consumed was only 50.3 mM under the control conditions without thionine and the electrodes (normal fermentation). There are no differences in the yields of H(2) and ethanol against glycerol consumed between the control conditions and the conditions with the electrode system. A pH of 6.0 was suitable for the H(2) production in the range between pH 6 and pH 7.5 in the electrode system. At pH values of 7.0 and 7.5, H(2) production decreased and formate was remarkably produced in the reaction solution. The rates of both glycerol consumption and the H(2) and ethanol production increased as the thionine concentration and the surface area of the working electrode increased. After 60 h, 154 mM of the initial 161 mM glycerol concentration in the wastes was consumed in the electrode system, which is a 2.6-fold increase compared to the control experiment. Biotechnol. Bioeng. 2007;98: 340-348. (c) 2007 Wiley Periodicals, Inc.

Reusable Energy and Power Sources: Rechargeable Batteries

ERIC Educational Resources Information Center

Hsiung, Steve C.; Ritz, John M.

2007-01-01

Rechargeable batteries are very popular within consumer electronics. If one uses a cell phone or portable electric tool, she/he understands the need to have a reliable product and the need to remember to use the recharging systems that follow a cycle of charge/discharge. Rechargeable batteries are being called "green" energy sources. They are a…

75 FR 51264 - Energy Conservation Program for Consumer Products: Decision and Order Granting a Waiver to LG...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-19

... Electronics, Inc. (LG) a waiver from the DOE electric refrigerator and refrigerator- freezer test procedure... takes this technology into account when measuring energy consumption. DATES: This Decision and Order is... Energy, Building Technologies Program, Mailstop EE-2J, 1000 Independence Avenue, SW., Washington, DC...

Effects on 2,2’,4,4’-Tetrabromodiphenyl ether (BDE 47) on Thyroxine Metabolism and Transport in Primary Rat and Human Hepatocytes

EPA Science Inventory

Polybrominated diphenyl ethers (PBDEs), a major class of brominated flame retardants, are used in consumer products including furniture, electronics, textiles, and plastics. PBDEs bioaccumulate in wildlife and humans; BDE 47 is the predominant PBDE congener detected and typicall...

17 CFR 248.126 - Delivery of opt out notices.

Code of Federal Regulations, 2010 CFR

2010-04-01

... (CONTINUED) REGULATIONS S-P AND S-AM Regulation S-AM: Limitations on Affiliate Marketing § 248.126 Delivery... Internet Web site at which the consumer obtained a product or service electronically and requires the... by e-mail from the affiliate providing the notice; or (3) Posts the notice on an Internet Web site...

75 FR 27256 - Implementation of Section 304 of the Telecommunications Act of 1996: Commercial Availability of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-14

... Availability of Navigation Devices; Compatibility Between Cable Systems and Consumer Electronics Equipment... cable operators and the consumer electronics industry to establish the technical details of the... Cable and Telecommunications Association and the Consumer Electronics Association had agreed in a...

12 CFR 226.5 - General disclosure requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... conspicuously in writing, 7 in a form that the consumer may keep. 8 The disclosures required by this subpart may be provided to the consumer in electronic form, subject to compliance with the consumer consent and... to the consumer in electronic form without regard to the consumer consent or other provisions of the...

12 CFR 1005.3 - Coverage.

Code of Federal Regulations, 2014 CFR

2014-01-01

...-time electronic fund transfer from a consumer's account. The consumer must authorize the transfer. (ii... one-time electronic fund transfer (in providing a check to a merchant or other payee for the MICR... transfer. A consumer authorizes a one-time electronic fund transfer from his or her account to pay the fee...

Dynamic Pricing in Electronic Commerce Using Neural Network

NASA Astrophysics Data System (ADS)

Ghose, Tapu Kumar; Tran, Thomas T.

In this paper, we propose an approach where feed-forward neural network is used for dynamically calculating a competitive price of a product in order to maximize sellers’ revenue. In the approach we considered that along with product price other attributes such as product quality, delivery time, after sales service and seller’s reputation contribute in consumers purchase decision. We showed that once the sellers, by using their limited prior knowledge, set an initial price of a product our model adjusts the price automatically with the help of neural network so that sellers’ revenue is maximized.

A weight-of-evidence approach to identify nanomaterials in consumer products: a case study of nanoparticles in commercial sunscreens.

PubMed

Cuddy, Michael F; Poda, Aimee R; Moser, Robert D; Weiss, Charles A; Cairns, Carolyn; Steevens, Jeffery A

2016-01-01

Nanoscale ingredients in commercial products represent a point of emerging environmental concern due to recent findings that correlate toxicity with small particle size. A weight-of-evidence (WOE) approach based upon multiple lines of evidence (LOE) is developed here to assess nanomaterials as they exist in consumer product formulations, providing a qualitative assessment regarding the presence of nanomaterials, along with a baseline estimate of nanoparticle concentration if nanomaterials do exist. Electron microscopy, analytical separations, and X-ray detection methods were used to identify and characterize nanomaterials in sunscreen formulations. The WOE/LOE approach as applied to four commercial sunscreen products indicated that all four contained at least 10% dispersed primary particles having at least one dimension <100 nm in size. Analytical analyses confirmed that these constituents were comprised of zinc oxide (ZnO) or titanium dioxide (TiO2). The screening approaches developed herein offer a streamlined, facile means to identify potentially hazardous nanomaterial constituents with minimal abrasive processing of the raw material.

Consumers' Kansei Needs Clustering Method for Product Emotional Design Based on Numerical Design Structure Matrix and Genetic Algorithms.

PubMed

Yang, Yan-Pu; Chen, Deng-Kai; Gu, Rong; Gu, Yu-Feng; Yu, Sui-Huai

2016-01-01

Consumers' Kansei needs reflect their perception about a product and always consist of a large number of adjectives. Reducing the dimension complexity of these needs to extract primary words not only enables the target product to be explicitly positioned, but also provides a convenient design basis for designers engaging in design work. Accordingly, this study employs a numerical design structure matrix (NDSM) by parameterizing a conventional DSM and integrating genetic algorithms to find optimum Kansei clusters. A four-point scale method is applied to assign link weights of every two Kansei adjectives as values of cells when constructing an NDSM. Genetic algorithms are used to cluster the Kansei NDSM and find optimum clusters. Furthermore, the process of the proposed method is presented. The details of the proposed approach are illustrated using an example of electronic scooter for Kansei needs clustering. The case study reveals that the proposed method is promising for clustering Kansei needs adjectives in product emotional design.

Consumers' Kansei Needs Clustering Method for Product Emotional Design Based on Numerical Design Structure Matrix and Genetic Algorithms

PubMed Central

Chen, Deng-kai; Gu, Rong; Gu, Yu-feng; Yu, Sui-huai

2016-01-01

Consumers' Kansei needs reflect their perception about a product and always consist of a large number of adjectives. Reducing the dimension complexity of these needs to extract primary words not only enables the target product to be explicitly positioned, but also provides a convenient design basis for designers engaging in design work. Accordingly, this study employs a numerical design structure matrix (NDSM) by parameterizing a conventional DSM and integrating genetic algorithms to find optimum Kansei clusters. A four-point scale method is applied to assign link weights of every two Kansei adjectives as values of cells when constructing an NDSM. Genetic algorithms are used to cluster the Kansei NDSM and find optimum clusters. Furthermore, the process of the proposed method is presented. The details of the proposed approach are illustrated using an example of electronic scooter for Kansei needs clustering. The case study reveals that the proposed method is promising for clustering Kansei needs adjectives in product emotional design. PMID:27630709

The application of similar image retrieval in electronic commerce.

PubMed

Hu, YuPing; Yin, Hua; Han, Dezhi; Yu, Fei

2014-01-01

Traditional online shopping platform (OSP), which searches product information by keywords, faces three problems: indirect search mode, large search space, and inaccuracy in search results. For solving these problems, we discuss and research the application of similar image retrieval in electronic commerce. Aiming at improving the network customers' experience and providing merchants with the accuracy of advertising, we design a reasonable and extensive electronic commerce application system, which includes three subsystems: image search display subsystem, image search subsystem, and product information collecting subsystem. This system can provide seamless connection between information platform and OSP, on which consumers can automatically and directly search similar images according to the pictures from information platform. At the same time, it can be used to provide accuracy of internet marketing for enterprises. The experiment shows the efficiency of constructing the system.

The Application of Similar Image Retrieval in Electronic Commerce

PubMed Central

Hu, YuPing; Yin, Hua; Han, Dezhi; Yu, Fei

2014-01-01

Traditional online shopping platform (OSP), which searches product information by keywords, faces three problems: indirect search mode, large search space, and inaccuracy in search results. For solving these problems, we discuss and research the application of similar image retrieval in electronic commerce. Aiming at improving the network customers' experience and providing merchants with the accuracy of advertising, we design a reasonable and extensive electronic commerce application system, which includes three subsystems: image search display subsystem, image search subsystem, and product information collecting subsystem. This system can provide seamless connection between information platform and OSP, on which consumers can automatically and directly search similar images according to the pictures from information platform. At the same time, it can be used to provide accuracy of internet marketing for enterprises. The experiment shows the efficiency of constructing the system. PMID:24883411

Analyzing Residential End-Use Energy Consumption Data to Inform Residential Consumer Decisions and Enable Energy Efficiency Improvements

NASA Astrophysics Data System (ADS)

Carlson, Derrick R.

While renewable energy is in the process of maturing, energy efficiency improvements may provide an opportunity to reduce energy consumption and consequent greenhouse gas emissions to bridge the gap between current emissions and the reductions necessary to prevent serious effects of climate change and will continue to be an integral part of greenhouse gas emissions policy moving forward. Residential energy is a largely untapped source of energy reductions as consumers, who wish to reduce energy consumption for monetary, environmental, and other reasons, face barriers. One such barrier is a lack of knowledge or understanding of how energy is consumed in a home and how to reduce this consumption effectively through behavioral and technological changes. One way to improve understanding of residential energy consumption is through the creation of a model to predict which appliances and electronics will be present and significantly contribute to the electricity consumption of a home on the basis of various characteristics of that home. The basis of this model is publically available survey data from the Residential Energy Consumption Survey (RECS). By predicting how households are likely to consume energy, homeowners, policy makers, and other stakeholders have access to valuable data that enables reductions in energy consumption in the residential sector. This model can be used to select homes that may be ripe for energy reductions and to predict the appliances that are the basis of these potential reductions. This work suggests that most homes in the U.S. have about eight appliances that are responsible for about 80% of the electricity consumption in that home. Characteristics such as census region, floor space, income, and total electricity consumption affect which appliances are likely to be in a home, however the number of appliances is generally around 8. Generally it takes around 4 appliances to reach the 50% threshold and 12 appliances to reach 90% of electricity consumption, which suggests significant diminishing returns for parties interested in monitoring appliance level electricity consumption. Another way to improve understanding of residential energy consumption is through the development of residential use phase energy vectors for use in the Economic Input-Output Life Cycle Assessment (EIO-LCA) model. The EIO-LCA model is a valuable scoping tool to predict the environmental impacts of economic activity. This tool has a gap in its capabilities as residential use phase energy is outside the scope of the model. Adding use phase energy vectors to the EIO-LCA model will improve the modeling, provide a more complete estimation of energy impacts and allow for embedded energy to be compared to use phase energy for the purchase of goods and services in the residential sector. This work adds 21 quads of energy to the residential energy sector for the model and 15 quads of energy for personal transportation. These additions represent one third of the total energy consumption of the United States and a third of the total energy in the EIO-LCA model. This work also demonstrates that for many products such as electronics and household appliances use phase energy demands are much greater than manufacturing energy demands and dominate the life cycles for these products. A final way in which this thesis improves upon the understanding of how use phase energy is consumed in a home is through the exploration of potential energy reductions in a home. This analysis selects products that are used or consumed in a home, and explores the potential for reductions in the embedded manufacturing and use phase energy of that product using EIO-LCA and the energy vectors created in Chapter 3. The results give consumers an understanding of where energy is consumed in the lifecycle of products that they purchase and provide policy makers with valuable information on how to focus or refocus policies that are aimed and reducing energy in the residential sector. This work finds that a majority of the energy consumed by retail products is consumed in the use phase of electronics and appliances. Consequently the largest potential reductions in residential energy use can be found in the same area. The work also shows that targeting reductions in the manufacturing energy for many products is likely to be an ineffective strategy for energy reductions with the exception of a select few products. Supply chain energy reductions may be more promising than manufacturing energy reductions, though neither is likely to be as effective as strategies that target use phase energy reductions.

The Application of Wearable Technology in Surgery: Ensuring the Positive Impact of the Wearable Revolution on Surgical Patients

PubMed Central

Slade Shantz, Jesse Alan; Veillette, Christian J. H.

2014-01-01

Wearable technology has become an important trend in consumer electronics in the past year. The miniaturization and mass production of myriad sensors have made possible the integration of sensors and output devices in wearable platforms. Despite the consumer focus of the wearable revolution some surgical applications are being developed. These fall into augmentative, assistive, and assessment functions and primarily layer onto current surgical workflows. Some challenges to the adoption of wearable technologies are discussed and a conceptual framework for understanding the potential of wearable technology to revolutionize surgical practice are presented. PMID:25593963

12 CFR 1005.6 - Liability of consumer for unauthorized transfers.

Code of Federal Regulations, 2012 CFR

2012-01-01

... transfers. 1005.6 Section 1005.6 Banks and Banking BUREAU OF CONSUMER FINANCIAL PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E) § 1005.6 Liability of consumer for unauthorized transfers. (a) Conditions for..., for an unauthorized electronic fund transfer involving the consumer's account only if the financial...

High-performance green flexible electronics based on biodegradable cellulose nanofibril paper

PubMed Central

Jung, Yei Hwan; Chang, Tzu-Hsuan; Zhang, Huilong; Yao, Chunhua; Zheng, Qifeng; Yang, Vina W.; Mi, Hongyi; Kim, Munho; Cho, Sang June; Park, Dong-Wook; Jiang, Hao; Lee, Juhwan; Qiu, Yijie; Zhou, Weidong; Cai, Zhiyong; Gong, Shaoqin; Ma, Zhenqiang

2015-01-01

Today's consumer electronics, such as cell phones, tablets and other portable electronic devices, are typically made of non-renewable, non-biodegradable, and sometimes potentially toxic (for example, gallium arsenide) materials. These consumer electronics are frequently upgraded or discarded, leading to serious environmental contamination. Thus, electronic systems consisting of renewable and biodegradable materials and minimal amount of potentially toxic materials are desirable. Here we report high-performance flexible microwave and digital electronics that consume the smallest amount of potentially toxic materials on biobased, biodegradable and flexible cellulose nanofibril papers. Furthermore, we demonstrate gallium arsenide microwave devices, the consumer wireless workhorse, in a transferrable thin-film form. Successful fabrication of key electrical components on the flexible cellulose nanofibril paper with comparable performance to their rigid counterparts and clear demonstration of fungal biodegradation of the cellulose-nanofibril-based electronics suggest that it is feasible to fabricate high-performance flexible electronics using ecofriendly materials. PMID:26006731

High-performance green flexible electronics based on biodegradable cellulose nanofibril paper.

PubMed

Jung, Yei Hwan; Chang, Tzu-Hsuan; Zhang, Huilong; Yao, Chunhua; Zheng, Qifeng; Yang, Vina W; Mi, Hongyi; Kim, Munho; Cho, Sang June; Park, Dong-Wook; Jiang, Hao; Lee, Juhwan; Qiu, Yijie; Zhou, Weidong; Cai, Zhiyong; Gong, Shaoqin; Ma, Zhenqiang

2015-05-26

Today's consumer electronics, such as cell phones, tablets and other portable electronic devices, are typically made of non-renewable, non-biodegradable, and sometimes potentially toxic (for example, gallium arsenide) materials. These consumer electronics are frequently upgraded or discarded, leading to serious environmental contamination. Thus, electronic systems consisting of renewable and biodegradable materials and minimal amount of potentially toxic materials are desirable. Here we report high-performance flexible microwave and digital electronics that consume the smallest amount of potentially toxic materials on biobased, biodegradable and flexible cellulose nanofibril papers. Furthermore, we demonstrate gallium arsenide microwave devices, the consumer wireless workhorse, in a transferrable thin-film form. Successful fabrication of key electrical components on the flexible cellulose nanofibril paper with comparable performance to their rigid counterparts and clear demonstration of fungal biodegradation of the cellulose-nanofibril-based electronics suggest that it is feasible to fabricate high-performance flexible electronics using ecofriendly materials.

High-performance green flexible electronics based on biodegradable cellulose nanofibril paper

NASA Astrophysics Data System (ADS)

Jung, Yei Hwan; Chang, Tzu-Hsuan; Zhang, Huilong; Yao, Chunhua; Zheng, Qifeng; Yang, Vina W.; Mi, Hongyi; Kim, Munho; Cho, Sang June; Park, Dong-Wook; Jiang, Hao; Lee, Juhwan; Qiu, Yijie; Zhou, Weidong; Cai, Zhiyong; Gong, Shaoqin; Ma, Zhenqiang

2015-05-01

Today's consumer electronics, such as cell phones, tablets and other portable electronic devices, are typically made of non-renewable, non-biodegradable, and sometimes potentially toxic (for example, gallium arsenide) materials. These consumer electronics are frequently upgraded or discarded, leading to serious environmental contamination. Thus, electronic systems consisting of renewable and biodegradable materials and minimal amount of potentially toxic materials are desirable. Here we report high-performance flexible microwave and digital electronics that consume the smallest amount of potentially toxic materials on biobased, biodegradable and flexible cellulose nanofibril papers. Furthermore, we demonstrate gallium arsenide microwave devices, the consumer wireless workhorse, in a transferrable thin-film form. Successful fabrication of key electrical components on the flexible cellulose nanofibril paper with comparable performance to their rigid counterparts and clear demonstration of fungal biodegradation of the cellulose-nanofibril-based electronics suggest that it is feasible to fabricate high-performance flexible electronics using ecofriendly materials.

The Next Technology Revolution - Nano Electronic Technology

NASA Astrophysics Data System (ADS)

Turlik, Iwona

2004-03-01

Nanotechnology is a revolutionary engine that will engender enormous changes in a vast majority of today's industries and markets, while potentially creating whole new industries. The impact of nanotechnology is particularly significant in the electronics industry, which is constantly driven by the need for higher performance, increased functionality, smaller size and lower cost. Nanotechnology can influence many of the hundreds of components that are typically assembled to manufacture modern electronic devices. Motorola manufactures electronics for a wide range of industries and communication products. In this presentation, the typical components of a cellular phone are outlined and technology requirements for future products, the customer benefits, and the potential impact of nanotechnology on many of the components are discussed. Technology needs include reliable materials supply, processes for high volume production, experimental and simulation tools, etc. For example, even routine procedures such as failure characterization may require the development of new tools for investigating nano-scale phenomena. Business needs include the development of an effective, high volume supply chain for nano-materials and devices, disruptive product platforms, and visible performance impact on the end consumer. An equally significant long-term industry need is the availability of science and engineering graduates with a multidisciplinary focus and a deep understanding of the fundamentals of nano-technology, that can harness the technology to create revolutionary products.

12 CFR 1005.6 - Liability of consumer for unauthorized transfers.

Code of Federal Regulations, 2014 CFR

2014-01-01

... transfers. 1005.6 Section 1005.6 Banks and Banking BUREAU OF CONSUMER FINANCIAL PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E) General § 1005.6 Liability of consumer for unauthorized transfers. (a) Conditions... this section, for an unauthorized electronic fund transfer involving the consumer's account only if the...

12 CFR 1005.6 - Liability of consumer for unauthorized transfers.

Code of Federal Regulations, 2013 CFR

2013-01-01

... transfers. 1005.6 Section 1005.6 Banks and Banking BUREAU OF CONSUMER FINANCIAL PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E) General § 1005.6 Liability of consumer for unauthorized transfers. (a) Conditions... this section, for an unauthorized electronic fund transfer involving the consumer's account only if the...

CES 2011: Tablet Crazy

ERIC Educational Resources Information Center

Rapp, David

2011-01-01

Ereaders are so last year. Tablets were the watchword at this year's annual Consumer Electronics Show (CES) in Las Vegas, January 6-9. This year, the show set new records, with some 2700 companies from around the world exhibiting at the multiple exhibition halls and 30,000 attendees gawking at the products. What did they see? There were still some…

77 FR 17364 - Inadmissibility of Consumer Products and Industrial Equipment Noncompliant With Applicable Energy...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-26

... upon written or electronic notice by DOE or FTC, CBP may conditionally release under bond to the... furnishing of a bond) that ensure that the merchandise will not violate 42 U.S.C. 6302. Proposed Regulation... importer under a CBP basic importation and entry bond for purposes of bringing the merchandise into...

Touch and Gesture-Based Language Learning: Some Possible Avenues for Research and Classroom Practice

ERIC Educational Resources Information Center

Reinders, Hayo

2014-01-01

Our interaction with digital resources is becoming increasingly based on touch, gestures, and now also eye movement. Many everyday consumer electronics products already include touch-based interfaces, from e-book readers to tablets, and from the last personal computers to the GPS system in your car. What implications do these new forms of…

78 FR 71643 - Certain Wireless Consumer Electronics Devices and Components Thereof; Commission Determination To...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-29

... Electronics Devices and Components Thereof; Commission Determination To Review in Part A Final Initial... sale within the United States after importation of certain wireless consumer electronics devices and... Electronics, Inc. of Seoul, Korea and LG Electronics U.S.A., Inc. of Englewood Cliffs, New Jersey...

12 CFR 205.9 - Receipts at electronic terminals; periodic statements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.9 Receipts at electronic terminals; periodic..., a financial institution shall make a receipt available to a consumer at the time the consumer initiates an electronic fund transfer at an electronic terminal. The receipt shall set forth the following...

12 CFR 205.9 - Receipts at electronic terminals; periodic statements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.9 Receipts at electronic terminals; periodic..., a financial institution shall make a receipt available to a consumer at the time the consumer initiates an electronic fund transfer at an electronic terminal. The receipt shall set forth the following...

12 CFR 205.9 - Receipts at electronic terminals; periodic statements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.9 Receipts at electronic terminals; periodic..., a financial institution shall make a receipt available to a consumer at the time the consumer initiates an electronic fund transfer at an electronic terminal. The receipt shall set forth the following...

12 CFR 205.9 - Receipts at electronic terminals; periodic statements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.9 Receipts at electronic terminals; periodic..., a financial institution shall make a receipt available to a consumer at the time the consumer initiates an electronic fund transfer at an electronic terminal. The receipt shall set forth the following...

12 CFR 205.9 - Receipts at electronic terminals; periodic statements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.9 Receipts at electronic terminals; periodic..., a financial institution shall make a receipt available to a consumer at the time the consumer initiates an electronic fund transfer at an electronic terminal. The receipt shall set forth the following...

What is included with your online e-cigarette order? An analysis of e-cigarette shipping, product and packaging features.

PubMed

Kong, Amanda Y; Derrick, Jason C; Abrantes, Anthony S; Williams, Rebecca S

2016-06-29

The electronic cigarette industry is growing, with youth using e-cigarettes at higher rates than they are using cigarettes, and retail and online sales projected to reach $10 billion in 2017. Minimal regulation of the production and marketing of e-cigarettes exists to date, which has allowed companies to promote unsupported claims. We assessed the shipping, product features and packaging of a wide variety of e-cigarettes purchased online by adults and youth. The most popular internet e-cigarette vendors were identified from a larger study of internet tobacco vendors. Between August 2013 and June 2014, adults made 56 purchase attempts from online vendors, and youth made 98 attempts. Packages received were assessed for exterior and internal packaging features, including product information, health warnings and additional materials. We analysed a total of 125 orders featuring 86 unique brands of e-cigarettes. The contents were rarely indicated on package exteriors. Product information came with just 60% of orders and just 38.4% included an instruction manual. Only 44.6% of products included a health warning, and some had unsupported claims, such as lack of secondhand smoke exposure. Additionally, some products were leaking e-liquid and battery fluid on arrival. A large variety of e-cigarette products are manufactured and marketed to consumers. Many products do not include instructions for use, and unsupported claims are being presented to consumers. Effective federal regulation of the manufacturing, packaging, product information and health claims surrounding e-cigarettes is necessary to ensure consumers are presented with accurate e-cigarette use information. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Overview of Electronic Nicotine Delivery Systems: A Systematic Review

PubMed Central

Glasser, Allison M.; Katz, Lauren; Pearson, Jennifer L.; Abudayyeh, Haneen; Niaura, Raymond S.; Abrams, David B.; Villanti, Andrea C.

2016-01-01

Context Rapid developments in e-cigarettes, or electronic nicotine delivery systems (ENDS), and the evolution of the overall tobacco product marketplace warrant frequent evaluation of the published literature. The purpose of this article is to report updated findings from a comprehensive review of the published scientific literature on ENDS. Evidence acquisition The authors conducted a systematic review of published empirical research literature on ENDS through May 31, 2016, using a detailed search strategy in the PubMed electronic database, expert review, and additional targeted searches. Included studies presented empirical findings and were coded to at least one of nine topics: (1) Product Features; (2) Health Effects; (3) Consumer Perceptions; (4) Patterns of Use; (5) Potential to Induce Dependence; (6) Smoking Cessation; (7) Marketing and Communication; (8) Sales; and (9) Policies; reviews and commentaries were excluded. Data from included studies were extracted by multiple coders (October 2015 to August 2016) into a standardized form and synthesized qualitatively by topic. Evidence synthesis There were 686 articles included in this systematic review. The majority of studies assessed patterns of ENDS use and consumer perceptions of ENDS, followed by studies examining health effects of vaping and product features. Conclusions Studies indicate that ENDS are increasing in use, particularly among current smokers, pose substantially less harm to smokers than cigarettes, are being used to reduce/quit smoking, and are widely available. More longitudinal studies and controlled trials are needed to evaluate the impact of ENDS on population-level tobacco use and determine the health effects of longer-term vaping. PMID:27914771

Overview of Electronic Nicotine Delivery Systems: A Systematic Review.

PubMed

Glasser, Allison M; Collins, Lauren; Pearson, Jennifer L; Abudayyeh, Haneen; Niaura, Raymond S; Abrams, David B; Villanti, Andrea C

2017-02-01

Rapid developments in e-cigarettes, or electronic nicotine delivery systems (ENDS), and the evolution of the overall tobacco product marketplace warrant frequent evaluation of the published literature. The purpose of this article is to report updated findings from a comprehensive review of the published scientific literature on ENDS. The authors conducted a systematic review of published empirical research literature on ENDS through May 31, 2016, using a detailed search strategy in the PubMed electronic database, expert review, and additional targeted searches. Included studies presented empirical findings and were coded to at least one of nine topics: (1) Product Features; (2) Health Effects; (3) Consumer Perceptions; (4) Patterns of Use; (5) Potential to Induce Dependence; (6) Smoking Cessation; (7) Marketing and Communication; (8) Sales; and (9) Policies; reviews and commentaries were excluded. Data from included studies were extracted by multiple coders (October 2015 to August 2016) into a standardized form and synthesized qualitatively by topic. There were 687 articles included in this systematic review. The majority of studies assessed patterns of ENDS use and consumer perceptions of ENDS, followed by studies examining health effects of vaping and product features. Studies indicate that ENDS are increasing in use, particularly among current smokers, pose substantially less harm to smokers than cigarettes, are being used to reduce/quit smoking, and are widely available. More longitudinal studies and controlled trials are needed to evaluate the impact of ENDS on population-level tobacco use and determine the health effects of longer-term vaping. Copyright © 2016 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

77 FR 9522 - Requirements for Consumer Registration of Durable Infant or Toddler Products

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-17

... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Part 1130 Requirements for Consumer Registration of Durable Infant or Toddler Products AGENCY: Consumer Product Safety Commission. ACTION: Final rule. SUMMARY: In accordance with the Consumer Product Safety Improvement Act of 2008 (``CPSIA''), the Consumer...

Morphology, Spatial Distribution, and Concentration of Flame Retardants in Consumer Products and Environmental Dusts using Scanning Electron Microscopy and Raman Micro-spectroscopy

PubMed Central

WAGNER, JEFF; GHOSAL, SUTAPA; WHITEHEAD, TODD; METAYER, CATHERINE

2013-01-01

We characterized flame retardant (FR) morphologies and spatial distributions in 7 consumer products and 7 environmental dusts to determine their implications for transfer mechanisms, human exposure, and the reproducibility of gas chromatography-mass spectrometry (GC-MS) dust measurements. We characterized individual particles using scanning electron microscopy / energy dispersive x-ray spectroscopy (SEM/EDS) and Raman micro-spectroscopy (RMS). Samples were screened for the presence of 3 FR constituents (bromine, phosphorous, non-salt chlorine) and 2 metal synergists (antimony and bismuth). Subsequent analyses of select samples by RMS enabled molecular identification of the FR compounds and matrix materials. The consumer products and dust samples possessed FR elemental weight percents of up to 36% and 31%, respectively. We identified 24 FR-containing particles in the dust samples and classified them into 9 types based on morphology and composition. We observed a broad range of morphologies for these FR-containing particles, suggesting FR transfer to dust via multiple mechanisms. We developed an equation to describe the heterogeneity of FR-containing particles in environmental dust samples. The number of individual FR-containing particles expected in a 1-mg dust sample with a FR concentration of 100 ppm ranged from <1 to >1000 particles. The presence of rare, high-concentration bromine particles was correlated with decabromodiphenyl ether concentrations obtained via GC-MS. When FRs are distributed heterogeneously in highly concentrated dust particles, human exposure to FRs may be characterized by high transient exposures interspersed by periods of low exposure, and GC-MS FR concentrations may exhibit large variability in replicate subsamples. Current limitations of this SEM/EDS technique include potential false negatives for volatile and chlorinated FRs and greater quantitation uncertainty for brominated FR in aluminum-rich matrices. PMID:23739093

Materials flow analysis of neodymium, status of rare earth metal in the Republic of Korea.

PubMed

Swain, Basudev; Kang, Leeseung; Mishra, Chinmayee; Ahn, JoongWoo; Hong, Hyun Seon

2015-11-01

Materials flow analysis of neodymium, status of rare earth elements (REEs) in the Republic of Korea has been investigated. Information from various resources like the Korean Ministry of Environment, Korea international trade association, United Nations Commodity Trade Statistics Database and from individual industry were collected and analyzed for materials flow analysis of neodymium. Demand of neodymium in the Republic of Korea for the year 2010 was 409.5 tons out of which the majority of neodymium, i.e., 68.41% was consumed by domestic electronics industry followed by medical appliances manufacturing (13.36%). The Republic Korea is one of the biggest consumer and leading exporter of these industrial products, absolutely depends on import of neodymium, as the country is lacking natural resources. The Republic of Korea has imported 325.9 tons of neodymium permanent magnet and 79.5 tons of neodymium containing equipment parts mainly for electronics, medical appliances, and heavy/light vehicles manufacturing industry. Out of which 95.4 tons of neodymium permanent magnet get exported as an intermediate product and 140.6 tons of neodymium in the form of consumable products get exported. Worldwide the neodymium is at the high end of supply chain critical metal because of increasing demand, scarcity and irreplaceable for technological application. To bring back the neodymium to supply stream the recycling of end of life neodymium-bearing waste can be a feasible option. Out of total domestic consumption, only 21.9 tons of neodymium have been collected and subsequently recycled. From material flow analysis, the requirement for an efficient recycling system and element-wise material flow management for these REEs in the Republic of Korea were realized and recommended. Copyright © 2015 Elsevier Ltd. All rights reserved.

[Electronic cigarettes - effects on health. Previous reports].

PubMed

Napierała, Marta; Kulza, Maksymilian; Wachowiak, Anna; Jabłecka, Katarzyna; Florek, Ewa

2014-01-01

Currently very popular in the market of tobacco products have gained electronic cigarettes (ang. E-cigarettes). These products are considered to be potentially less harmful in compared to traditional tobacco products. However, current reports indicate that the statements of the producers regarding to the composition of the e- liquids not always are sufficient, and consumers often do not have reliable information on the quality of the product used by them. This paper contain a review of previous reports on the composition of e-cigarettes and their impact on health. Most of the observed health effects was related to symptoms of the respiratory tract, mouth, throat, neurological complications and sensory organs. Particularly hazardous effects of the e-cigarettes were: pneumonia, congestive heart failure, confusion, convulsions, hypotension, aspiration pneumonia, face second-degree burns, blindness, chest pain and rapid heartbeat. In the literature there is no information relating to passive exposure by the aerosols released during e-cigarette smoking. Furthermore, the information regarding to the use of these products in the long term are not also available.

12 CFR 1005.14 - Electronic fund transfer service provider not holding consumer's account.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 8 2012-01-01 2012-01-01 false Electronic fund transfer service provider not... PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E) § 1005.14 Electronic fund transfer service provider not holding consumer's account. (a) Provider of electronic fund transfer service. A person that provides an...

12 CFR 1005.14 - Electronic fund transfer service provider not holding consumer's account.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 8 2013-01-01 2013-01-01 false Electronic fund transfer service provider not... PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E) General § 1005.14 Electronic fund transfer service provider not holding consumer's account. (a) Provider of electronic fund transfer service. A person that...

12 CFR 1005.14 - Electronic fund transfer service provider not holding consumer's account.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 8 2014-01-01 2014-01-01 false Electronic fund transfer service provider not... PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E) General § 1005.14 Electronic fund transfer service provider not holding consumer's account. (a) Provider of electronic fund transfer service. A person that...

78 FR 56245 - Certain Wireless Consumer Electronics Devices and Components Thereof; Notice of Request for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-12

... Electronics Devices and Components Thereof; Notice of Request for Statements on the Public Interest AGENCY: U... wireless consumer electronics devices and components thereof imported by respondents Acer, Inc. of Taipei... Communications, Inc. of San Diego, California; LG Electronics, Inc. of Seoul, Korea; LG Electronics U.S.A., Inc...

High-performance green flexible electronics based on biodegradable cellulose nanofibril paper

Treesearch

Yei Hwan Jung; Tzu-Hsuan Chang; Huilong Zhang; Chunhua Yao; Qifeng Zheng; Vina W. Yang; Hongyi Mi; Munho Kim; Sang June Cho; Dong-Wook Park; Hao Jiang; Juhwan Lee; Yijie Qiu; Weidong Zhou; Zhiyong Cai; Shaoqin Gong; Zhenqiang Ma

2015-01-01

Today’s consumer electronics, such as cell phones, tablets and other portable electronic devices, are typically made of non-renewable, non-biodegradable, and sometimes potentially toxic (for example, gallium arsenide) materials. These consumer electronics are frequently upgraded or discarded, leading to serious environmental contamination. Thus, electronic systems...

Life cycle assessment of post-consumer plastics production from waste electrical and electronic equipment (WEEE) treatment residues in a Central European plastics recycling plant.

PubMed

Wäger, Patrick A; Hischier, Roland

2015-10-01

Plastics play an increasingly important role in reaching the recovery and recycling rates defined in the European WEEE Directive. In a recent study we have determined the life cycle environmental impacts of post-consumer plastics production from mixed, plastics-rich WEEE treatment residues in the Central European plant of a market-leading plastics recycler, both from the perspective of the customers delivering the residues and the customers buying the obtained post-consumer recycled plastics. The results of our life cycle assessments, which were extensively tested with sensitivity analyses, show that from both perspectives plastics recycling is clearly superior to the alternatives considered in this study (i.e. municipal solid waste incineration (MSWI) and virgin plastics production). For the three ReCiPe endpoint damage categories, incineration in an MSWI plant results in an impact exceeding that of the examined plastics recycling facility each by about a factor of 4, and the production of virgin plastics has an impact exceeding that of the post-consumer recycled (PCR) plastics production each by a factor of 6-10. On a midpoint indicator level the picture is more differentiated, showing that the environmental impacts of the recycling options are lower by 50% and more for almost all impact factors. While this provides the necessary evidence for the environmental benefits of plastics recycling compared to existing alternatives, it can, however, not be taken as conclusive evidence. To be conclusive, future research will have to address the fate of hazardous substances in the outputs of such recycling systems in more detail. Copyright © 2015 Elsevier B.V. All rights reserved.

Automated discovery of safety and efficacy concerns for joint & muscle pain relief treatments from online reviews.

PubMed

Adams, David Z; Gruss, Richard; Abrahams, Alan S

2017-04-01

Product issues can cost companies millions in lawsuits and have devastating effects on a firm's sales, image and goodwill, especially in the era of social media. The ability for a system to detect the presence of safety and efficacy (S&E) concerns early on could not only protect consumers from injuries due to safety hazards, but could also mitigate financial damage to the manufacturer. Prior studies in the field of automated defect discovery have found industry-specific techniques appropriate to the automotive, consumer electronics, home appliance, and toy industries, but have not investigated pain relief medicines and medical devices. In this study, we focus specifically on automated discovery of S&E concerns in over-the-counter (OTC) joint and muscle pain relief remedies and devices. We select a dataset of over 32,000 records for three categories of Joint & Muscle Pain Relief treatments from Amazon's online product reviews, and train "smoke word" dictionaries which we use to score holdout reviews, for the presence of safety and efficacy issues. We also score using conventional sentiment analysis techniques. Compared to traditional sentiment analysis techniques, we found that smoke term dictionaries were better suited to detect product concerns from online consumer reviews, and significantly outperformed the sentiment analysis techniques in uncovering both efficacy and safety concerns, across all product subcategories. Our research can be applied to the healthcare and pharmaceutical industry in order to detect safety and efficacy concerns, reducing risks that consumers face using these products. These findings can be highly beneficial to improving quality assurance and management in joint and muscle pain relief. Copyright © 2017 Elsevier B.V. All rights reserved.

US consumer interest in non-cigarette tobacco products spikes around the 2009 federal tobacco tax increase.

PubMed

Jo, Catherine L; Ayers, John W; Althouse, Benjamin M; Emery, Sherry; Huang, Jidong; Ribisl, Kurt M

2015-07-01

This quasi-experimental longitudinal study monitored aggregate Google search queries as a proxy for consumer interest in non-cigarette tobacco products (NTP) around the time of the 2009 US federal tobacco tax increase. Query trends for searches mentioning common NTP were downloaded from Google's public archives. The mean relative increase was estimated by comparing the observed with expected query volume for the 16 weeks around the tax. After the tax was announced, queries spiked for chewing tobacco, cigarillos, electronic cigarettes ('e-cigarettes'), roll-your-own (RYO) tobacco, snuff, and snus. E-cigarette queries were 75% (95% CI 70% to 80%) higher than expected 8 weeks before and after the tax, followed by RYO 59% (95% CI 53% to 65%), snus 34% (95% CI 31% to 37%), chewing tobacco 17% (95% CI 15% to 20%), cigarillos 14% (95% CI 11% to 17%), and snuff 13% (95% CI 10% to 14%). Unique queries increasing the most were 'ryo cigarettes' 427% (95% CI 308% to 534%), 'ryo tobacco' 348% (95% CI 300% to 391%), 'best electronic cigarette' 221% (95% CI 185% to 257%), and 'e-cigarette' 205% (95% CI 163% to 245%). The 2009 tobacco tax increase triggered large increases in consumer interest for some NTP, particularly e-cigarettes and RYO tobacco. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

What is included with your online e-cigarette order? An analysis of e-cigarette shipping, product and packaging features

PubMed Central

Kong, Amanda Y; Derrick, Jason C; Abrantes, Anthony S

2016-01-01

Background The electronic cigarette industry is growing, with youth using e-cigarettes at higher rates than they are using cigarettes, and retail and online sales projected to reach $10 billion in 2017. Minimal regulation of the production and marketing of e-cigarettes exists to date, which has allowed companies to promote unsupported claims. We assessed the shipping, product features and packaging of a wide variety of e-cigarettes purchased online by adults and youth. Methods The most popular internet e-cigarette vendors were identified from a larger study of internet tobacco vendors. Between August 2013 and June 2014, adults made 56 purchase attempts from online vendors, and youth made 98 attempts. Packages received were assessed for exterior and internal packaging features, including product information, health warnings and additional materials. Results We analysed a total of 125 orders featuring 86 unique brands of e-cigarettes. The contents were rarely indicated on package exteriors. Product information came with just 60% of orders and just 38.4% included an instruction manual. Only 44.6% of products included a health warning, and some had unsupported claims, such as lack of secondhand smoke exposure. Additionally, some products were leaking e-liquid and battery fluid on arrival. Conclusions A large variety of e-cigarette products are manufactured and marketed to consumers. Many products do not include instructions for use, and unsupported claims are being presented to consumers. Effective federal regulation of the manufacturing, packaging, product information and health claims surrounding e-cigarettes is necessary to ensure consumers are presented with accurate e-cigarette use information. PMID:27357936

Determining Synthetic Routes to Consumer Product Ingredients through the Use of Electronic Resources

ERIC Educational Resources Information Center

Love, Brian E.; Bennett, Lisa J.

2016-01-01

An activity is described in which students in the first semester of a two semester organic chemistry laboratory class are introduced to the use of SciFinder. Students are required to determine the structures of three compounds as well as additional information regarding the synthesis of one of them using some of the features available in SciFinder.

Commentary: Tablet PCs--Lightweights with a Teaching Punch

ERIC Educational Resources Information Center

Parslow, Graham R.

2010-01-01

Tablet (or slate) computers are a group of small portable computers that have two features in common, a touch screen and wireless connectivity to the web. At the 2010 Consumer Electronics show held in January in Las Vegas, this category of product caused the greatest interest ahead of the release of the Apple iPad (www.cesweb.org). The tablet PC…

Consumers' perceptions of vape shops in Southern California: an analysis of online Yelp reviews.

PubMed

Sussman, Steve; Garcia, Robert; Cruz, Tess Boley; Baezconde-Garbanati, Lourdes; Pentz, Mary Ann; Unger, Jennifer B

2014-01-01

E-cigarettes are sold at many different types of retail establishments. A new type of shop has emerged, the vape shop, which specializes in sales of varied types of e-cigarettes. Vape shops allow users to sample several types. There are no empirical research articles on vape shops. Information is needed on consumers' beliefs and behaviors about these shops, the range of products sold, marketing practices, and variation in shop characteristics by ethnic community and potential counter-marketing messages. This study is the first to investigate marketing characteristics of vape shops located in different ethnic neighborhoods in Los Angeles, by conducting a Yelp electronic search and content analysis of consumer reports on vape shops they have visited. The primary measure was Yelp reviews (N = 103 vape shops in the Los Angeles, California area), which were retrieved and content coded. We compared the attributes of vape shops representing four ethnic communities: African American, Hispanic/Latino, Korean, and White. Vape shop attributes listed as most important were the selection of flavors or hardware (95%), fair prices (92%), and unique flavors or hardware (89%). Important staff marketing attributes included being friendly (99%), helpful/patient/respectful (97%), and knowledgeable/professional (95%). Over one-half of the shops were rated as clean (52%) and relaxed (61%). Relatively few of the reviews mentioned quitting smoking (32%) or safety of e-cigarettes (15%). The selection of flavors and hardware appeared relatively important in Korean ethnic location vape shops. Yelp reviews may influence potential consumers. As such, the present study's focus on Yelp reviews addressed at least eight of the FDA's Center for Tobacco Products' priorities pertaining to marketing influences on consumer beliefs and behaviors. The findings suggest that there were several vape shop and product attributes that consumers considered important to disseminate to others through postings on Yelp. Lack of health warnings about these products may misrepresent their potential risk. The main influence variables were product variety and price. There was only a little evidence of influence of ethnic neighborhood; for example, regarding importance of flavors and hardware. Shop observational studies are recommended to discern safety factors across different ethnic neighborhoods.

The significance of microbial processes in hydrogeology and geochemistry

USGS Publications Warehouse

Chapelle, F.H.

2000-01-01

Microbial processes affect the chemical composition of groundwater and the hydraulic properties of aquifers in both contaminated and pristine groundwater systems. The patterns of water-chemistry changes that occur depend upon the relative abundance of electron donors and electron acceptors. In many pristine aquifers, where microbial metabolism is limited by the availability of electron donors (usually organic matter), dissolved inorganic carbon (DIC) accumulates slowly along aquifer flow paths and available electron acceptors are consumed sequentially in the order dissolved oxygen > nitrate > Fe(III) > sulfate > CO2 (methanogenesis). In aquifers contaminated by anthropogenic contaminants, an excess of available organic carbon often exists, and microbial metabolism is limited by the availability of electron acceptors. In addition to changes in groundwater chemistry, the solid matrix of the aquifer is affected by microbial processes. The production of carbon dioxide and organic acids can lead to increased mineral solubility, which can lead to the development of secondary porosity and permeability. Conversely, microbial production of carbonate, ferrous iron, and sulfide can result in the precipitation of secondary calcite or pyrite cements that reduce primary porosity and permeability in groundwater systems.

Sectorial analysis of nanotechnology companies in Argentina

NASA Astrophysics Data System (ADS)

Foladori, Guillermo; Lau, Edgar Záyago; Carroza, Tomás; Appelbaum, Richard P.; Villa, Liliana; Robles-Belmont, Eduardo

2017-06-01

In this paper, we identify 37 companies that produce nano-enabled products in Argentina. We locate the products of these firms in terms of both their economic sector and position in a value chain. The research was done through a four-step methodology. Firstly, an inventory of firms was created. Secondly, the firms were classified by their economic sector, following the United Nations economic classification. Thirdly, the firms were located within a simple nanotechnology value chain. Finally, the products were classified according to their final destination, being either means of production or final consumer products. The results show that healthcare, cosmetics, and medicine is the most represented sector along the value chain, followed by electronics.

Field-portable-XRF reveals the ubiquity of antimony in plastic consumer products.

PubMed

Turner, Andrew; Filella, Montserrat

2017-04-15

Very little systematic information exists on the occurrence and concentrations of antimony (Sb) in consumer products. In this study, a Niton XL3t field-portable-X-ray fluorescence (FP-XRF) spectrometer was deployed in situ and in the laboratory to provide quantitative information on Sb dissipated in plastic items and fixtures (including rubber, textile and foamed materials) from the domestic, school, vehicular and office settings. The metalloid was detected in 18% of over 800 measurements performed, with concentrations ranging from about 60 to 60,000μgg -1 . The highest concentrations were encountered in white, electronic casings and in association with similar concentrations of Br, consistent with the use of antimony oxides (e.g. Sb 2 O 3 ) as synergistic flame retardants. Concentrations above 1000μgg -1 , and with or without Br, were also encountered in paints, piping and hosing, adhesives, whiteboards, Christmas decorations, Lego blocks, document carriers, garden furniture, upholstered products and interior panels of private motor vehicles. Lower concentrations of Sb were encountered in a wide variety of items but its presence (without Br) in food tray packaging, single-use drinks bottles, straws and small toys were of greatest concern from a human health perspective. While the latter observations are consistent with the use of antimony compounds as catalysts in the production of polyethylene terephthalate, co-association of Sb and Br in many products not requiring flame retardancy suggests that electronic casings are widely recycled. Further research is required into the mobility of Sb when dissipated in new, recycled and aged polymeric materials. Copyright © 2017 Elsevier B.V. All rights reserved.

Benefits and Risks of Electronic Medical Record (EMR): An Interpretive Analysis of Healthcare Consumers' Perceptions of an Evolving Health Information Systems Technology

ERIC Educational Resources Information Center

Thompson, Chester D.

2013-01-01

The purpose of this study is to explore healthcare consumers' perceptions of their Electronic Medical Records (EMRs). Although there have been numerous studies regarding EMRs, there have been minimal, if any, research that explores healthcare consumers' awareness of this technology and the social implications that result. As consumers' health…

12 CFR 1005.9 - Receipts at electronic terminals; periodic statements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... TRANSFERS (REGULATION E) General § 1005.9 Receipts at electronic terminals; periodic statements. (a... institution shall make a receipt available to a consumer at the time the consumer initiates an electronic fund transfer at an electronic terminal. The receipt shall set forth the following information, as applicable...

12 CFR 1005.9 - Receipts at electronic terminals; periodic statements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... TRANSFERS (REGULATION E) General § 1005.9 Receipts at electronic terminals; periodic statements. (a... institution shall make a receipt available to a consumer at the time the consumer initiates an electronic fund transfer at an electronic terminal. The receipt shall set forth the following information, as applicable...

12 CFR 1005.9 - Receipts at electronic terminals; periodic statements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... TRANSFERS (REGULATION E) § 1005.9 Receipts at electronic terminals; periodic statements. (a) Receipts at... shall make a receipt available to a consumer at the time the consumer initiates an electronic fund transfer at an electronic terminal. The receipt shall set forth the following information, as applicable...

Building a Terabyte Memory Bandwidth Compute Node with Four Consumer Electronics GPUs

NASA Astrophysics Data System (ADS)

Omlin, Samuel; Räss, Ludovic; Podladchikov, Yuri

2014-05-01

GPUs released for consumer electronics are generally built with the same chip architectures as the GPUs released for professional usage. With regards to scientific computing, there are no obvious important differences in functionality or performance between the two types of releases, yet the price can differ up to one order of magnitude. For example, the consumer electronics release of the most recent NVIDIA Kepler architecture (GK110), named GeForce GTX TITAN, performed equally well in conducted memory bandwidth tests as the professional release, named Tesla K20; the consumer electronics release costs about one third of the professional release. We explain how to design and assemble a well adjusted computer with four high-end consumer electronics GPUs (GeForce GTX TITAN) combining more than 1 terabyte/s memory bandwidth. We compare the system's performance and precision with the one of hardware released for professional usage. The system can be used as a powerful workstation for scientific computing or as a compute node in a home-built GPU cluster.

16 CFR 1031.3 - Consumer Product Safety Act amendments.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Consumer Product Safety Act amendments. 1031.3 Section 1031.3 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL COMMISSION... Consumer Product Safety Act amendments. The Consumer Product Safety Act, as amended, contains several...

16 CFR 1031.3 - Consumer Product Safety Act amendments.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Consumer Product Safety Act amendments. 1031.3 Section 1031.3 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL COMMISSION... Consumer Product Safety Act amendments. The Consumer Product Safety Act, as amended, contains several...

Internet-based Advertising Claims and Consumer Reasons for Using Electronic Cigarettes by Device Type in the US.

PubMed

Pulvers, Kim; Sun, Jessica Y; Zhuang, Yue-Lin; Holguin, Gabriel; Zhu, Shu-Hong

2017-10-01

Important differences exist between closed-system and open-system e-cigarettes, but it is unknown whether online companies are marketing these devices differently and whether consumer reasons for using e-cigarettes vary by device type. This paper compares Internet-based advertising claims of closed- versus open-system products, and evaluates US consumers' reasons for using closed- versus open-system e-cigarettes. Internet sites selling exclusively closed (N = 130) or open (N = 129) e-cigarettes in December 2013-January 2014 were coded for advertising claims. Current users (≥18 years old) of exclusively closed or open e-cigarettes (N = 860) in a nationally representative online survey in February-March 2014 provided their main reason for using e-cigarettes. Internet sites that exclusively sold closed-system e-cigarettes were more likely to make cigarette-related claims such as e-cigarettes being healthier and cheaper than cigarettes (ps < .0001) compared to sites selling open systems. Many sites implied their products could help smokers quit. Exclusive users of both systems endorsed cessation as their top reason. Closed-system users were more likely to report their reason as "use where smoking is banned." Although promotion of e-cigarettes as cessation aids is prohibited, consumers of both systems endorsed smoking cessation as their top reason for using e-cigarettes.

12 CFR 1005.3 - Coverage.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Banking BUREAU OF CONSUMER FINANCIAL PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E) General § 1005.3... Consumer Financial Protection Act of 2010, Title X of the Dodd-Frank Wall Street Reform and Consumer Protection Act, Public Law 111-203, 124 Stat. 1376. (b) Electronic fund transfer. (1) Definition. The term...

12 CFR 1005.3 - Coverage.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Banking BUREAU OF CONSUMER FINANCIAL PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E) § 1005.3 Coverage... Consumer Financial Protection Act of 2010, Title X of the Dodd-Frank Wall Street Reform and Consumer Protection Act, Public Law 111-203, 124 Stat. 1376. (b) Electronic fund transfer—(1) Definition. The term...

12 CFR 205.11 - Procedures for resolving errors.

Code of Federal Regulations, 2010 CFR

2010-01-01

... institution's findings and shall note the consumer's right to request the documents that the institution... transfer; (ii) An incorrect electronic fund transfer to or from the consumer's account; (iii) The omission... made by the financial institution relating to an electronic fund transfer; (v) The consumer's receipt...

The market of electrical and electronic equipment waste in Portugal: Analysis of take-back consumers' decisions.

PubMed

Botelho, Anabela; Ferreira Dias, Marta; Ferreira, Carla; Pinto, Lígia M Costa

2016-10-01

This paper aims to ascertain the efficacy and acceptability of five incentive schemes for the take-back of waste electrical and electronic equipment in Portugal, focusing in consumers' perspectives. It assesses users' perception of these items, evaluating the motivations and interests they have concerning the market of waste electrical and electronic equipment. Results indicate, on one hand, a lack of awareness by consumers about the process of take-back of their equipment. On the other hand, results show that information conditions and socio-demographic factors affect consumers' motivations for returning the electrical and electronic equipment at the end of life. In this context, it can be concluded that, in Portugal, the market for the recovery of waste electrical and electronic equipment is still in its infancy. © The Author(s) 2016.

16 CFR 1116.8 - Determination of particular model.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Section 1116.8 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS REPORTS SUBMITTED PURSUANT TO SECTION 37 OF THE CONSUMER PRODUCT SAFETY ACT § 1116.8 Determination...) Information on how consumers use the products and on consumer need or demand for different products, such as...

75 FR 7550 - Requirements for Consumer Registration of Durable Infant or Toddler Products; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-22

... a final rule under section 104(d) of the Consumer Product Safety Improvement Act of 2008 (``CPSIA... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Part 1130 Requirements for Consumer Registration of Durable Infant or Toddler Products; Correction AGENCY: Consumer Product Safety Commission. ACTION: Final...

Assessing consumer responses to potential reduced-exposure tobacco products: a review of tobacco industry and independent research methods.

PubMed

Rees, Vaughan W; Kreslake, Jennifer M; Cummings, K Michael; O'Connor, Richard J; Hatsukami, Dorothy K; Parascandola, Mark; Shields, Peter G; Connolly, Gregory N

2009-12-01

Internal tobacco industry documents and the mainstream literature are reviewed to identify methods and measures for evaluating tobacco consumer response. The review aims to outline areas in which established methods exist, identify gaps in current methods for assessing consumer response, and consider how these methods might be applied to evaluate potentially reduced exposure tobacco products and new products. Internal industry research reviewed included published articles, manuscript drafts, presentations, protocols, and instruments relating to consumer response measures were identified and analyzed. Peer-reviewed research was identified using PubMed and Scopus. Industry research on consumer response focuses on product development and marketing. To develop and refine new products, the tobacco industry has developed notable strategies for assessing consumers' sensory and subjective responses to product design characteristics. Independent research is often conducted to gauge the likelihood of future product adoption by measuring consumers' risk perceptions, responses to product, and product acceptability. A model that conceptualizes consumer response as comprising the separate, but interacting, domains of product perceptions and response to product is outlined. Industry and independent research supports the dual domain model and provides a wide range of methods for assessment of the construct components of consumer response. Further research is needed to validate consumer response constructs, determine the relationship between consumer response and tobacco user behavior, and improve reliability of consumer response measures. Scientifically rigorous consumer response assessment methods will provide a needed empirical basis for future regulation of potentially reduced-exposure tobacco products and new products, to counteract tobacco industry influence on consumers, and enhance the public health.

The search for consumer content in energy marketing and retailing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dar, V.K.

1996-09-15

The gas and electric industries in the United STates control about $900 billion in assets (production, logistical, merchant). They employ these assets to serve about 150 million customers (counted separately for gas and electric), but they manage to offer only two rudimentary products-molecules and electrons-and at only two levels of service: firm and interruptible. Such a poverty of consumer content stands without precedent in the history of U.S. business. That this game is coming to an end should elicit no surprise. True retail competition in the gas and electric industries will become a transforming and quotidian reality within five years,more » creating great shifts in revenue and capital: (1) a $50-billion drip in annual consumer energy spending; (2) from $200 to $300 billion extinguished over seven to 10 years in noncash book value in the pipes and wires and energy production industries; (3) tens of billions of dollars in new investments, particularly gas-fired merchant and distributed generation plants, and computing and communications systems; and (4) many more billions in new enterprise value for efficient and innovative firms. The old business model emphasized industrial technology and quantitative increases in consumption of energy commodities. The new model, supplanting the old, will accentuate information technology and qualitative increases in consumption of energy services.« less

12 CFR 40.7 - Form of opt out notice to consumers; opt out methods.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., if the consumer agrees, electronically. (2) When a customer relationship terminates, the customer's... during or related to that relationship. If the individual subsequently establishes a new customer... opt out notice in writing or, if the consumer agrees, electronically. (d) Joint relationships. (1) If...

16 CFR 313.7 - Form of opt out notice to consumers; opt out methods.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., electronically. (2) When a customer relationship terminates, the customer's opt out direction continues to apply... the individual subsequently establishes a new customer relationship with you, the opt out direction... writing or, if the consumer agrees, electronically. (d) Joint relationships—(1) If two or more consumers...

12 CFR 332.7 - Form of opt out notice to consumers; opt out methods.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., electronically. (2) When a customer relationship terminates, the customer's opt out direction continues to apply... the individual subsequently establishes a new customer relationship with you, the opt out direction... writing or, if the consumer agrees, electronically. (d) Joint relationships—(1) If two or more consumers...

12 CFR 216.7 - Form of opt out notice to consumers; opt out methods.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., electronically. (2) When a customer relationship terminates, the customer's opt out direction continues to apply... the individual subsequently establishes a new customer relationship with you, the opt out direction... writing or, if the consumer agrees, electronically. (d) Joint relationships—(1) If two or more consumers...

12 CFR 205.3 - Coverage.

Code of Federal Regulations, 2014 CFR

2014-01-01

... to initiate a one-time electronic fund transfer from a consumer's account. The consumer must...-time electronic fund transfer (in providing a check to a merchant or other payee for the MICR encoding... information for the transfer shall also provide a notice to the consumer at the same time it provides the...

12 CFR 205.3 - Coverage.

Code of Federal Regulations, 2011 CFR

2011-01-01

... to initiate a one-time electronic fund transfer from a consumer's account. The consumer must...-time electronic fund transfer (in providing a check to a merchant or other payee for the MICR encoding... information for the transfer shall also provide a notice to the consumer at the same time it provides the...

12 CFR 205.3 - Coverage.

Code of Federal Regulations, 2013 CFR

2013-01-01

... to initiate a one-time electronic fund transfer from a consumer's account. The consumer must...-time electronic fund transfer (in providing a check to a merchant or other payee for the MICR encoding... information for the transfer shall also provide a notice to the consumer at the same time it provides the...

Consumers' perception of organic product characteristics. A review.

PubMed

Schleenbecker, Rosa; Hamm, Ulrich

2013-12-01

Consumer interest in organic products is growing alongside a diversification of the supply. In order to serve consumers actual needs and wants regarding organic products, those involved in the market need to be informed about consumers' perception of organic products. Therefore, the state of research as regards consumers' perception of organic product characteristics, including basic and additional characteristics, product labelling, product innovations and the range of products on the market is displayed in this contribution. A comprehensive literature analysis was performed uncovering not only the state of the art in the field including employed methodology, but also research needs. Most studies are published on consumers' perception of organic products' design and labelling. A trend towards the so called 'organic-plus' positioning can be perceived, with many consumers expecting an extensive orientation towards sustainability. The diversity of product labels features prominently in related studies. The demand for reliable information, as well as the low degree of awareness of many labels amongst consumers becomes clear in these studies. To date, few results are available on consumers' perception of packaging and design of organic products, and even fewer for consumers' perception of range design. Both consumers' perception of organic product innovation and valued added services are untouched so far. Copyright © 2013 Elsevier Ltd. All rights reserved.

16 CFR 1500.230 - Guidance for lead (Pb) in consumer products.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Guidance for lead (Pb) in consumer products. 1500.230 Section 1500.230 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS... § 1500.230 Guidance for lead (Pb) in consumer products. (a) Summary. (1) The U.S. Consumer Product Safety...

Microbial utilization of electrically reduced neutral red as the sole electron donor for growth and metabolite production

DOE Office of Scientific and Technical Information (OSTI.GOV)

Park, D.H.; Laivenieks, M.; Guettler, M.V.

1999-07-01

Electrically reduced neutral red (NR) served as the sole source of reducing power for growth and metabolism of pure and mixed cultures of H[sub 2]-consuming bacteria in a novel electrochemical bioreactor system. NR was continuously reduced by the cathodic potential ([minus]1.5 V) generated from an electric current (0.3 to 1.0 mA), and it was subsequently oxidized by Actinobacillus succinogenes or by mixed methanogenic cultures. The A. succinogenes mutant strain FZ-6 did not grow on fumarate alone unless electrically reduced NR or hydrogen was present as the electron donor for succinate production. The mutant strain, unlike the wild type, lacked pyruvatemore » formate lyase and formate dehydrogenase. Electrically reduced NR also replaced hydrogen as the sole electron donor source for growth and production of methane from CO[sub 2]. These results show that both pure and mixed cultures can function as electrochemical devices when electrically generated reducing power can be used to drive metabolism. The potential utility of utilizing electrical reducing power in enhancing industrial fermentations or biotransformation processes is discussed.« less

Audit Report on "The Department's Management of the ENERGY STAR Program"

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2009-10-01

The American Recovery and Reinvestment Act (Recovery Act) authorized about $300 million in consumer rebate incentives for purchases of products rated under the 'ENERGY STAR' Program. ENERGY STAR, a voluntary labeling program established in 1992, provides consumers with energy efficiency data for a range of products so that they can make informed purchase judgments. The overall goal of the program is to encourage consumers to choose energy efficient products, advancing the nationwide goal of reducing energy consumption. The U.S. Environmental Protection Agency (EPA) managed the ENERGY STAR Program on a stand-alone basis until 1996 when it joined forces with themore » Department of Energy (Department). A Memorandum of Cooperation expanded the ENERGY STAR product categories, giving the Department responsibility for overseeing eight product categories such as windows, dishwashers, clothes washers, and refrigerators, while EPA retained responsibility for electronic product categories and heating, ventilating, and cooling equipment. Each agency is responsible for setting product efficiency specifications for those items under its control and for ensuring the proper use of the ENERGY STAR label in the marketplace. In August 2007, the EPA Office of Inspector General issued an audit report identifying significant control weaknesses in EPA's management of ENERGY STAR. The Department, concerned by the findings at EPA and eager to improve its own program, developed an approach to verify adherence to product specifications, ensure proper use of the ENERGY STAR label in the marketplace, and improve the establishment of product specifications. As evidenced by the commitment of $300 million in Recovery Act funds, the ENERGY STAR Program plays an important role in the U.S. efforts to reduce energy consumption. We initiated this audit to determine whether the Department had implemented the actions it announced in 2007 to strengthen the Program. The Department had not implemented planned improvements in the ENERGY STAR Program. Our audit revealed that officials had not: (1) Developed a formal quality assurance program to help ensure that product specifications were adhered to; (2) Effectively monitored the use of the ENERGY STAR label to ensure that only qualifying products were labeled as compliant; and (3) Formalized procedures for establishing and revising product specifications and for documenting decisions regarding those specifications. In our judgment, the delay in the Department's planned improvements in its management of the ENERGY STAR Program could reduce consumer confidence in the integrity of the ENERGY STAR label. Such loss of credibility could reduce energy savings, increase consumer risk, and diminish the value of the recent infusion of $300 million for ENERGY STAR rebates under the Recovery Act.« less

High-Intensity Sweeteners in Alternative Tobacco Products.

PubMed

Miao, Shida; Beach, Evan S; Sommer, Toby J; Zimmerman, Julie B; Jordt, Sven-Eric

2016-11-01

Sweeteners in tobacco products may influence use initiation and reinforcement, with special appeal to adolescents. Recent analytical studies of smokeless tobacco products (snuff, snus, dissolvables) detected flavorants identical to those added to confectionary products such as hard candy and chewing gum. However, these studies did not determine the levels of sweeteners. The objective of the present study was to quantify added sweeteners in smokeless tobacco products, a dissolvable product, electronic cigarette liquids and to compare with sweetener levels in confectionary products. Sweetener content of US-sourced smokeless tobacco, electronic cigarette liquid, and confectionary product samples was analyzed by liquid chromatography-electrospray ionization-mass spectrometry (LC-ESI-MS). All smokeless products contained synthetic high intensity sweeteners, with snus and dissolvables exceeding levels in confectionary products (as much as 25-fold). All snus samples contained sucralose and most also aspartame, but no saccharin. In contrast, all moist snuff samples contained saccharin. The dissolvable sample contained sucralose and sorbitol. Ethyl maltol was the most common sweet-associated component in electronic cigarette liquids. Sweetener content was dependent on product category, with saccharin in moist snuff, an older category, sucralose added at high levels to more recently introduced products (snus, dissolvable) and ethyl maltol in electronic cigarette liquid. The very high sweetener concentrations may be necessary for the consumer to tolerate the otherwise aversive flavors of tobacco ingredients. Regulation of sweetener levels in smokeless tobacco products may be an effective measure to modify product attractiveness, initiation and use patterns. Dissolvables, snus and electronic cigarettes have been promoted as risk-mitigation products due to their relatively low content of nitrosamines and other tobacco toxicants. This study is the first to quantify high intensity sweeteners in snus and dissolvable products. Snus and dissolvables contain the high intensity sweetener, sucralose, at levels higher than in confectionary products. The high sweetness of alternative tobacco products makes these products attractive to adolescents. Regulation of sweetener content in non-cigarette products is suggested as an efficient means to control product palatability and to reduce initiation in adolescents. © The Author 2016. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco.

High-Intensity Sweeteners in Alternative Tobacco Products

PubMed Central

Miao, Shida; Beach, Evan S.; Sommer, Toby J.; Zimmerman, Julie B.

2016-01-01

Introduction: Sweeteners in tobacco products may influence use initiation and reinforcement, with special appeal to adolescents. Recent analytical studies of smokeless tobacco products (snuff, snus, dissolvables) detected flavorants identical to those added to confectionary products such as hard candy and chewing gum. However, these studies did not determine the levels of sweeteners. The objective of the present study was to quantify added sweeteners in smokeless tobacco products, a dissolvable product, electronic cigarette liquids and to compare with sweetener levels in confectionary products. Methods: Sweetener content of US-sourced smokeless tobacco, electronic cigarette liquid, and confectionary product samples was analyzed by liquid chromatography-electrospray ionization–mass spectrometry (LC-ESI-MS). Results: All smokeless products contained synthetic high intensity sweeteners, with snus and dissolvables exceeding levels in confectionary products (as much as 25-fold). All snus samples contained sucralose and most also aspartame, but no saccharin. In contrast, all moist snuff samples contained saccharin. The dissolvable sample contained sucralose and sorbitol. Ethyl maltol was the most common sweet-associated component in electronic cigarette liquids. Discussion: Sweetener content was dependent on product category, with saccharin in moist snuff, an older category, sucralose added at high levels to more recently introduced products (snus, dissolvable) and ethyl maltol in electronic cigarette liquid. The very high sweetener concentrations may be necessary for the consumer to tolerate the otherwise aversive flavors of tobacco ingredients. Regulation of sweetener levels in smokeless tobacco products may be an effective measure to modify product attractiveness, initiation and use patterns. Implications: Dissolvables, snus and electronic cigarettes have been promoted as risk-mitigation products due to their relatively low content of nitrosamines and other tobacco toxicants. This study is the first to quantify high intensity sweeteners in snus and dissolvable products. Snus and dissolvables contain the high intensity sweetener, sucralose, at levels higher than in confectionary products. The high sweetness of alternative tobacco products makes these products attractive to adolescents. Regulation of sweetener content in non-cigarette products is suggested as an efficient means to control product palatability and to reduce initiation in adolescents. PMID:27217475

Consumer-orientated development of hybrid beef burger and sausage analogues.

PubMed

Neville, Michelle; Tarrega, Amparo; Hewson, Louise; Foster, Tim

2017-07-01

Hybrid meat analogues, whereby a proportion of meat has been partially replaced by more sustainable protein sources, have been proposed to provide a means for more sustainable diets in the future. Consumer testing was conducted to determine consumer acceptability of different formulations of Hybrid beef burgers and pork sausages in comparison with both meat and meat-free commercial products. Acceptability data were generated using the 9-point hedonic scale. Check-all-that-apply (CATA) questioning was used to determine the sensory attributes perceived in each product as well as information on the attributes of consumers' ideal products. It was identified that Hybrid products were generally well liked among consumers and no significant differences in consumer acceptability (p > .05) were identified between Hybrid and full meat products, whereas meat-free products were found to be less accepted. However, Hybrid sausages received higher acceptability scores (6.00-6.51) than Hybrid burgers (5.84-5.92) suggesting that format may have a large impact on consumer acceptability of Hybrid products. Correspondence Analysis (CA) indicated that Hybrid products were grouped with meat products in their sensory attributes. Penalty analysis found that a "meaty flavor" was the largest factor driving consumer acceptability in both burgers and sausages. Cluster analysis of consumer acceptability data identified key differences in overall acceptability between different consumer groups (consumers who only eat meat products and consumers who eat both meat and meat-free products). The Hybrid concept was found to bridge the acceptability gap between meat and meat-free products; however, further product reformulation is required to optimize consumer acceptability.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harwood, Caroline S.

This project is to develop and apply techniques in metabolic engineering to improve the biocatalytic potential of the bacterium Rhodopseudomonas palustris for nitrogenase-catalyzed hydrogen gas production. R. palustris, is an ideal platform to develop as a biocatalyst for hydrogen gas production because it is an extremely versatile microbe that produces copious amounts of hydrogen by drawing on abundant natural resources of sunlight and biomass. Anoxygenic photosynthetic bacteria, such as R. palustris, generate hydrogen and ammonia during a process known as biological nitrogen fixation. This reaction is catalyzed by the enzyme nitrogenase and normally consumes nitrogen gas, ATP and electrons. Themore » applied use of nitrogenase for hydrogen production is attractive because hydrogen is an obligatory product of this enzyme and is formed as the only product when nitrogen gas is not supplied. Our challenge is to understand the systems biology of R. palustris sufficiently well to be able to engineer cells to produce hydrogen continuously, as fast as possible and with as high a conversion efficiency as possible of light and electron donating substrates. For many experiments we started with a strain of R. palustris that produces hydrogen constitutively under all growth conditions. We then identified metabolic pathways and enzymes important for removal of electrons from electron-donating organic compounds and for their delivery to nitrogenase in whole R. palustris cells. For this we developed and applied improved techniques in 13C metabolic flux analysis. We identified reactions that are important for generating electrons for nitrogenase and that are yield-limiting for hydrogen production. We then increased hydrogen production by blocking alternative electron-utilizing metabolic pathways by mutagenesis. In addition we found that use of non-growing cells as biocatalysts for hydrogen gas production is an attractive option, because cells divert all resources away from growth and to hydrogen. Also R. palustris cells remain viable in a non-growing state for long periods of time.« less

Design for Usability; practice-oriented research for user-centered product design.

PubMed

van Eijk, Daan; van Kuijk, Jasper; Hoolhorst, Frederik; Kim, Chajoong; Harkema, Christelle; Dorrestijn, Steven

2012-01-01

The Design for Usability project aims at improving the usability of electronic professional and consumer products by creating new methodology and methods for user-centred product development, which are feasible to apply in practice. The project was focused on 5 key areas: (i) design methodology, expanding the existing approach of scenario-based design to incorporate the interaction between product design, user characteristics, and user behaviour; (ii) company processes, barriers and enablers for usability in practice; (iii) user characteristics in relation to types of products and use-situations; (iv) usability decision-making; and (v) product impact on user behaviour. The project team developed methods and techniques in each of these areas to support the design of products with a high level of usability. This paper brings together and summarizes the findings.

Electronic nicotine delivery systems: adult use and awareness of the 'e-cigarette' in the USA.

PubMed

Regan, Annette K; Promoff, Gabbi; Dube, Shanta R; Arrazola, Rene

2013-01-01

Electronic nicotine delivery systems (ENDS), also referred to as electronic cigarettes or e-cigarettes, were introduced into the US market in 2007. Despite concerns regarding the long-term health impact of this product, there is little known about awareness and use of ENDS among adults in the USA. A consumer-based mail-in survey (ConsumerStyles) was completed by 10,587 adults (≥ 18 years) in 2009 and 10,328 adults in 2010. Data from these surveys were used to monitor awareness, ever use and past month use of ENDS from 2009 to 2010 and to assess demographic characteristics and tobacco use of ENDS users. In this US sample, awareness of ENDS doubled from 16.4% in 2009 to 32.2% in 2010 and ever use more than quadrupled from 2009 (0.6%) to 2010 (2.7%). Ever use of ENDS was most common among women and those with lower education, although these were not the groups who had heard of ENDS most often. Current smokers and tobacco users were most likely to try ENDS. However, current smokers who had tried ENDS did not say they planned to quit smoking more often than smokers who had never tried them. Given the large increase in awareness and ever use of ENDS during this 1-year period and the unknown impact of ENDS use on cigarette smoking behaviours and long-term health, continued monitoring of these products is needed.

12 CFR 205.14 - Electronic fund transfer service provider not holding consumer's account.

Code of Federal Regulations, 2010 CFR

2010-01-01

... consumer learns of the loss or theft; and extends the time periods for reporting unauthorized transfers or... 12 Banks and Banking 2 2010-01-01 2010-01-01 false Electronic fund transfer service provider not... GOVERNORS OF THE FEDERAL RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.14 Electronic fund...

12 CFR 205.14 - Electronic fund transfer service provider not holding consumer's account.

Code of Federal Regulations, 2013 CFR

2013-01-01

... consumer learns of the loss or theft; and extends the time periods for reporting unauthorized transfers or... 12 Banks and Banking 2 2013-01-01 2013-01-01 false Electronic fund transfer service provider not... GOVERNORS OF THE FEDERAL RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.14 Electronic fund...

12 CFR 205.14 - Electronic fund transfer service provider not holding consumer's account.

Code of Federal Regulations, 2014 CFR

2014-01-01

... consumer learns of the loss or theft; and extends the time periods for reporting unauthorized transfers or... 12 Banks and Banking 2 2014-01-01 2014-01-01 false Electronic fund transfer service provider not... GOVERNORS OF THE FEDERAL RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.14 Electronic fund...

12 CFR 205.14 - Electronic fund transfer service provider not holding consumer's account.

Code of Federal Regulations, 2011 CFR

2011-01-01

... consumer learns of the loss or theft; and extends the time periods for reporting unauthorized transfers or... 12 Banks and Banking 2 2011-01-01 2011-01-01 false Electronic fund transfer service provider not... GOVERNORS OF THE FEDERAL RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.14 Electronic fund...

12 CFR 205.14 - Electronic fund transfer service provider not holding consumer's account.

Code of Federal Regulations, 2012 CFR

2012-01-01

... consumer learns of the loss or theft; and extends the time periods for reporting unauthorized transfers or... 12 Banks and Banking 2 2012-01-01 2012-01-01 false Electronic fund transfer service provider not... GOVERNORS OF THE FEDERAL RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.14 Electronic fund...

16 CFR 1304.4 - Consumer patching compounds as banned hazardous products.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Consumer patching compounds as banned hazardous products. 1304.4 Section 1304.4 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS BAN OF CONSUMER PATCHING COMPOUNDS CONTAINING RESPIRABLE FREE-FORM ASBESTOS...

16 CFR 1304.4 - Consumer patching compounds as banned hazardous products.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Consumer patching compounds as banned hazardous products. 1304.4 Section 1304.4 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS BAN OF CONSUMER PATCHING COMPOUNDS CONTAINING RESPIRABLE FREE-FORM ASBESTOS...

Consumer Information in the Electronic Media: Neutral Information, Advertising, Selling. Working Paper No. 4.

ERIC Educational Resources Information Center

Sepstrup, Preben; Olander, Folke

This paper presents a self-contained summary in English of the results of a research project conducted for the Nordic Council of Ministers to define problems, advantages, and disadvantages of the electronic dissemination of information for consumers, and to determine whether consumer organizations should adapt their information activities and…

Consumer preferences and willingness to pay for value-added chicken product attributes.

PubMed

Martínez Michel, Lorelei; Anders, Sven; Wismer, Wendy V

2011-10-01

A growing demand for convenient and ready-to-eat products has increased poultry processors' interest in developing consumer-oriented value-added chicken products. In this study, a conjoint analysis survey of 276 chicken consumers in Edmonton was conducted during the summer of 2009 to assess the importance of the chicken part, production method, processing method, storage method, the presence of added flavor, and cooking method on consumer preferences for different value-added chicken product attributes. Estimates of consumer willingness to pay (WTP) premium prices for different combinations of value-added chicken attributes were also determined. Participants'"ideal" chicken product was a refrigerated product made with free-range chicken breast, produced with no additives or preservatives and no added flavor, which could be oven heated or pan heated. Half of all participants on average were willing to pay 30% more for a value-added chicken product over the price of a conventional product. Overall, young consumers, individuals who shop at Farmers' Markets and those who prefer free-range or organic products were more likely to pay a premium for value-added chicken products. As expected, consumers' WTP was affected negatively by product price. Combined knowledge of consumer product attribute preferences and consumer WTP for value-added chicken products can help the poultry industry design innovative value-added chicken products. Practical Application:  An optimum combination of product attributes desired by consumers for the development of a new value-added chicken product, as well as the WTP for this product, have been identified in this study. This information is relevant to the poultry industry to enhance consumer satisfaction of future value-added chicken products and provide the tools for future profit growth. © 2011 Institute of Food Technologists®

The Green Synthesis and Evaluation of Silver Nanoparticles and Zinc Oxide Nanoparticles

NASA Astrophysics Data System (ADS)

Gebear-Eigzabher, Bellsabel

Nanoparticle (NP) research has received exceptional attention as the field of study that contributes to transforming the world of materials science. When implementing NPs in consumer and industrial products, their unique properties improve technologies to the extent of significant game-changing breakthroughs. Conversely, the increased production of NPs, their use, their disposal or inadvertent release in the environment drove the need for processes and policies that ensures consumer and environmental safety. Mitigation of any harmful effects that NPs could potentially have combines methods of safe preparation, safe handling and safe disposal as well as containment of any inadvertent release. Our focus is in safe preparation of nanomaterials and we report green and energy efficient synthesis methods for metal NPs and metal oxide NPs of two popular materials: silver (Ag) and zinc oxide (ZnO). The thesis explained: 1) The impact of NPs in nowadays' world; 2) Synthesis methods that were designed to include environmentally-friendly staring materials and energy-saving fabrication processes, with emphasis on maintaining NPs final size and morphology when compared with existing methods; and 3) Nanoparticles characterization and data collection which allowed us to determine and/or validate their properties. Nanoparticles were studied using transmission electron microscope (TEM), X-Ray powder diffraction (XRD), low-voltage (5 keV) transmission electron microscopy (LV EM 5), Fourier-Transform Infrared Spectroscopy (FT-IR), and Ultraviolet-Visible (UV-Vis) spectroscopy. We developed an aqueous-based preparation of zinc oxide nanoparticles (ZnO NPs) using microwave-assisted chemistry to render a well-controlled particle size distribution within each set of reaction conditions in the range of 15 nm to 75 nm. We developed a scalable silver nanoparticles synthesis by chemical reduction methods. The NPs could be used in consumer products. The measurement tools for consumer products were also used on in-house synthesized Ag NPs. Commercially available silver nanoparticles have been compared with the in-house synthesized ones and characterized by Photothermal Lens (PTL) Spectroscopy. In respect to particle size and morphology, the Ag NPs synthesized by chemical reduction methods are similar to Ag nanoparticle solution available in the market. However, the synthesized nanoparticles are high in concentration and do not show signs of aggregation or agglomeration. It was concluded that our Ag NPs are superior to the commercially available ones by exhibiting large concentrations in ultra-stable dispersions.

16 CFR § 1302.1 - Scope and application.

Code of Federal Regulations, 2013 CFR

2013-01-01

...§ 1302.1 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS... Consumer Product Safety Commission (Commission) declares extremely flammable contact adhesives and similar liquid or semiliquid consumer products to be banned hazardous products under sections 8 and 9 of the...

16 CFR 1210.11 - General.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR CIGARETTE LIGHTERS Certification Requirements § 1210.11 General. Section 14(a) of the Consumer Product... product that is subject to a consumer product safety standard and that is distributed in commerce to issue...

No sisyphean task: how the FDA can regulate electronic cigarettes.

PubMed

Paradise, Jordan

2013-01-01

The adverse effects of smoking have fostered a natural market for smoking cessation and smoking reduction products. Smokers attempting to quit or reduce consumption have tried everything: "low" or "light" cigarettes; nicotine-infused chewing gum, lozenges, and lollipops; dermal patches; and even hypnosis. The latest craze in the quest to find a safer source of nicotine is the electronic cigarette. Electronic cigarettes (e-cigarettes) have swept the market, reaching a rapidly expanding international consumer base. Boasting nicotine delivery and the tactile feel of a traditional cigarette without the dozens of other chemical constituents that contribute to carcinogenicity, e-cigarettes are often portrayed as less risky, as a smoking reduction or even a complete smoking cessation product, and perhaps most troubling for its appeal to youth, as a flavorful, trendy, and convenient accessory. The sensationalism associated with e-cigarettes has spurred outcry from health and medical professional groups, as well as the Food and Drug Administration (FDA), because of the unknown effects on public health. Inhabiting a realm of products deemed "tobacco products" under recent 2009 legislation, e-cigarettes pose new challenges to FDA regulation because of their novel method of nicotine delivery, various mechanical and electrical parts, and nearly nonexistent safety data. Consumer use, marketing and promotional claims, and technological characteristics of e-cigarettes have also raised decades old questions of when the FDA can assert authority over products as drugs or medical devices. Recent case law restricting FDA enforcement efforts against e-cigarettes further confounds the distinction among drugs and medical devices, emerging e-cigarette products, and traditional tobacco products such as cigarettes, cigars, and smokeless tobacco. This Article investigates the e-cigarette phenomenon in the wake of the recently enacted Family Smoking Prevention and Tobacco Control Act of 2009 (TCA). It examines the tumultuous history of attempts at tobacco regulation by reflecting on the history of Congressional activity to regulate tobacco sales and promotion. Furthermore, this Article suggests a feasible approach to strengthening regulation of e-cigarettes under the existing statutory framework. This approach includes increased scrutiny of manufacturer and distributor claims that trigger drug and medical device provisions, utilization of new tobacco product and modified risk tobacco product provisions, and promulgation of new FDA regulations and guidance specifically directed at e-cigarettes.

Interaction between photosynthetic electron transport and chloroplast sinks triggers protection and signalling important for plant productivity

PubMed Central

Gollan, Peter J.; Lima-Melo, Yugo; Tiwari, Arjun; Tikkanen, Mikko

2017-01-01

The photosynthetic light reactions provide energy that is consumed and stored in electron sinks, the products of photosynthesis. A balance between light reactions and electron consumption in the chloroplast is vital for plants, and is protected by several photosynthetic regulation mechanisms. Photosystem I (PSI) is particularly susceptible to photoinhibition when these factors become unbalanced, which can occur in low temperatures or in high light. In this study we used the pgr5 Arabidopsis mutant that lacks ΔpH-dependent regulation of photosynthetic electron transport as a model to study the consequences of PSI photoinhibition under high light. We found that PSI damage severely inhibits carbon fixation and starch accumulation, and attenuates enzymatic oxylipin synthesis and chloroplast regulation of nuclear gene expression after high light stress. This work shows that modifications to regulation of photosynthetic light reactions, which may be designed to improve yield in crop plants, can negatively impact metabolism and signalling, and thereby threaten plant growth and stress tolerance. This article is part of the themed issue ‘Enhancing photosynthesis in crop plants: targets for improvement’. PMID:28808104

Short pulse free electron laser amplifier

DOEpatents

Schlitt, Leland G.; Szoke, Abraham

1985-01-01

Method and apparatus for amplification of a laser pulse in a free electron laser amplifier where the laser pulse duration may be a small fraction of the electron beam pulse duration used for amplification. An electron beam pulse is passed through a first wiggler magnet and a short laser pulse to be amplified is passed through the same wiggler so that only the energy of the last fraction, f, (f<1) of the electron beam pulse is consumed in amplifying the laser pulse. After suitable delay of the electron beam, the process is repeated in a second wiggler magnet, a third, . . . , where substantially the same fraction f of the remainder of the electron beam pulse is consumed in amplification of the given short laser pulse in each wiggler magnet region until the useful electron beam energy is substantially completely consumed by amplification of the laser pulse.

Assessment of Electronic Government Information Products

DTIC Science & Technology

1999-03-30

Center for Environmental Info. & Statistics CM Consumer Handbook for Reducing Solid Waste CM Envirofacts Warehouse CM EPA Online Library System (OLS) CP...Hazardous Waste Site Query (CERCLIS Data) CM Surf Your Watershed CM Test Methods for Evaluating Solid Waste : Physical/Chemical Methods (SW-846) CM...SGML because they consider it "intelligent data" that can automatically generate other formats (e.g., web, BBS, Fax on Demand) through templates and

78 FR 49365 - Electronic Fund Transfers (Regulation E); Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-14

... BUREAU OF CONSUMER FINANCIAL PROTECTION 12 CFR Part 1005 [Docket No. CFPB-2012-0050] RIN 3170-AA33 Electronic Fund Transfers (Regulation E); Correction AGENCY: Bureau of Consumer Financial Protection. ACTION... 2013 Final Rule, which along with three other final rules \\1\\ implements the Electronic Fund Transfer...

Consumer Cost Differences for Traditional and Internet Markets.

ERIC Educational Resources Information Center

Shaw, Michael J.; Strader, Troy J.

1999-01-01

Addresses research issues related to the economics of electronic, Internet-based markets. Discusses consumer cost-based differences for traditional and electronic markets; revenue implications for sellers and transaction intermediaries; and results of an empirical, survey-based study of an electronic market in the sports trading-card industry.…

Consumers’ Preferences for Electronic Nicotine Delivery System Product Features: A Structured Content Analysis

PubMed Central

Kistler, Christine E.; Crutchfield, Trisha M.; Sutfin, Erin L.; Ranney, Leah M.; Berman, Micah L.; Zarkin, Gary A.; Goldstein, Adam O.

2017-01-01

To inform potential governmental regulations, we aimed to develop a list of electronic nicotine delivery system (ENDS) product features important to U.S. consumers by age and gender. We employed qualitative data methods. Participants were eligible if they had used an ENDS at least once. Groups were selected by age and gender (young adult group aged 18–25, n = 11; middle-age group aged 26–64, n = 9; and women’s group aged 26–64, n = 9). We conducted five individual older adult interviews (aged 68–80). Participants discussed important ENDS features. We conducted a structured content analysis of the group and interview responses. Of 34 participants, 68% were white and 56% were female. Participants mentioned 12 important ENDS features, including: (1) user experience; (2) social acceptability; (3) cost; (4) health risks/benefits; (5) ease of use; (6) flavors; (7) smoking cessation aid; (8) nicotine content; (9) modifiability; (10) ENDS regulation; (11) bridge between tobacco cigarettes; (12) collectability. The most frequently mentioned ENDS feature was modifiability for young adults, user experience for middle-age and older adults, and flavor for the women’s group. This study identified multiple features important to ENDS consumers. Groups differed in how they viewed various features by age and gender. These results can inform ongoing regulatory efforts. PMID:28590444

Analyzing the environmental impacts of laptop enclosures ...

EPA Pesticide Factsheets

The market growth of consumer electronics makes it essential for industries and policy-makers to work together to develop sustainable products. The objective of this study is to better understand how to promote environmentally sustainable consumer electronics by examining the use of various materials in laptop enclosures (excluding mounting hardware, internal components, and insulation) using screening-level life cycle assessment. The baseline material, is a fossil plastic blend of polycarbonate-acrylonitrile butadiene styrene. Alternative materials include polylactic acid, bamboo, aluminum, and various combinations of these materials known to be currently used or being considered for use in laptops. The flame retardants considered in this study are bisphenol A bis(diphenyl phosphate), triphenyl phosphate, 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide, and borax-boric acid-phosphorous acid. The Tool for the Reduction and Assessment of Chemical and other environmental Impacts v2.1 was used for the assessment of impacts related to climate change, human and ecological health, and resource use. The assessment demonstrates that plastics, relative to the other materials, are currently some of the better performing materials in terms of having the lowest potential environmental impact for a greater number of impact categories based on product life cycle models developed in this study. For fossil plastics, the material performance increases with increasing post-con

Pediatric Genital Injury: An Analysis of the National Electronic Injury Surveillance System

PubMed Central

Casey, Jessica T.; Bjurlin, Marc A.; Cheng, Earl Y.

2013-01-01

Objective To describe the characteristics of pediatric genital injuries presenting to United States emergency departments (EDs). Methods A retrospective cohort study utilizing the U.S. Consumer Product Safety Commission (CPSC) National Electronic Injury Surveillance System (NEISS) from 1991-2010 to evaluate pediatric genital injuries was performed. Results Pediatric genital injuries represented 0.6% of all pediatric injuries with the incidence of injuries rising through the period studied, 1991-2010. The mean age at injury was 7.1 years old and was distributed 56.6% girls and 43.4% boys. A total of 43.3% had lacerations and 42.2% had contusions/abrasions. The majority of injuries occurred at home (65.9%), and the majority of patients (94.7%) were treated and released from the hospital. The most common consumer products associated with pediatric genital trauma were: bicycles (14.7% of all pediatric genital injuries), bathtubs (5.8%), daywear (5.6%), monkey bars (5.4%), and toilets (4.0%). Conclusion Although pediatric genital injuries represent a small proportion of overall injuries presenting to the ED, genital injuries continue to rise despite public health measures targeted to decrease childhood injury. Our results can be used to guide further prevention strategies for pediatric genital injury. PMID:23953603

EPA ENERGY STAR: Tackling Growth in Home Electronics and Small Appliances

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sanchez, Marla Christine; Brown, Richard; Homan, Gregory

2008-11-17

Over a decade ago, the electricity consumption associated with home electronics and other small appliances emerged onto the global energy policy landscape as one of the fastest growing residential end uses with the opportunity to deliver significant energy savings. As our knowledge of this end use matures, it is essential to step back and evaluate the degree to which energy efficiency programs have successfully realized energy savings and where savings opportunities have been missed.For the past fifteen years, we have quantified energy, utility bill, and carbon savings for US EPA?s ENERGY STAR voluntary product labeling program. In this paper, wemore » present a unique look into the US residential program savings claimed to date for EPA?s ENERGY STAR office equipment, consumer electronics, and other small household appliances as well as EPA?s projected program savings over the next five years. We present a top-level discussion identifying program areas where EPA?s ENERGY STAR efforts have succeeded and program areas where ENERGY STAR efforts did not successfully address underlying market factors, technology issues and/or consumer behavior. We end by presenting the magnitude of ?overlooked? savings.« less

16 CFR 1304.1 - Scope and application.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS BAN OF... this part 1304 the Consumer Product Safety Commission declares that consumer patching compounds... become airborne under reasonably foreseeable conditions of use, are banned hazardous products under...

16 CFR 1304.1 - Scope and application.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS BAN OF... this part 1304 the Consumer Product Safety Commission declares that consumer patching compounds... become airborne under reasonably foreseeable conditions of use, are banned hazardous products under...

The identification of polar organic compounds found in consumer products and their toxicological properties.

PubMed

Cooper, S D; Raymer, J H; Pellizzari, E D; Thomas, K W

1995-01-01

Exposure to volatile organic compounds (VOCs) in the indoor environment has received substantial research attention in the past several years, with the goal of better understanding the impact of such exposures on human health and well-being. Many VOCs can arise from consumer products used within the indoor environment. The VOCs emitted from five representative consumer products were collected onto Tenax-GC and subjected to thermal desorption and analysis by gas chromatography, in combination with low-resolution mass spectrometry (MS), high-resolution MS, and matrix-isolation Fourier transform infrared spectroscopy for structural characterization. An emphasis was placed on the polar organic compounds often used to provide fragrance in these products. The structures of a number of these compounds were confirmed, and an electronic literature search was carried out on them to determine any known toxic properties. The search revealed that many of the VOCs possess toxic properties when studied at acute, relatively high-level exposures. In addition, toxic effects were reported for a few of the chemicals, such as benzaldehyde, alpha-terpineol, benzyl acetate, and ethanol, at relatively low dose levels of 9-14 mg/kg. In general, the data were unclear as to the effect of chronic, low-level exposures. The widespread use of such chemicals suggests that the health effects of chronic exposures need to be determined. Validated analytical methods for the quantitative characterization of polar organic compounds at low concentrations will be required to make such work possible.

Impact of a targeted direct marketing price promotion intervention (Buywell) on food-purchasing behaviour by low income consumers: a randomised controlled trial.

PubMed

Stead, M; MacKintosh, A M; Findlay, A; Sparks, L; Anderson, A S; Barton, K; Eadie, D

2017-08-01

Price promotions are a promising intervention for encouraging healthier food purchasing. We aimed to assess the impact of a targeted direct marketing price promotion combined with healthy eating advice and recipe suggestions on the purchase of selected healthier foods by low income consumers. We conducted a randomised controlled trial (n = 53 367) of a direct marketing price promotion (Buywell) combined with healthy eating advice and recipe suggestions for low income consumers identified as 'less healthy' shoppers. Impact was assessed using electronic point of sale data for UK low income shoppers before, during and after the promotion. The proportion of customers buying promoted products in the intervention month increased by between 1.4% and 2.8% for four of the five products. There was significantly higher uptake in the promotion month (P < 0.001) for the intervention group than would have been expected on the basis of average uptake in the other months. When product switching was examined for semi-skimmed/skimmed milk, a modest increase (1%) was found in the intervention month of customers switching from full-fat to low-fat milk. This represented 8% of customers who previously bought only full-fat milk. The effects were generally not sustained after the promotion period. Short-term direct marketing price promotions combined with healthy eating advice and recipe suggestions targeted at low income consumers are feasible and can have a modest impact on short-term food-purchasing behaviour, although further approaches are needed to help sustain these changes. © 2017 The British Dietetic Association Ltd.

Assessing Consumer Responses to PREPs: A Review of Tobacco Industry and Independent Research Methods

PubMed Central

Rees, Vaughan W.; Kreslake, Jennifer M.; Cummings, K. Michael; O'Connor, Richard J.; Hatsukami, Dorothy K.; Parascandola, Mark; Shields, Peter G.; Connolly, Gregory N.

2009-01-01

Objective Internal tobacco industry documents and the mainstream literature are reviewed to identify methods and measures for evaluating tobacco consumer response. The review aims to outline areas in which established methods exist, identify gaps in current methods for assessing CR, and consider how these methods might be applied to evaluate PREPs and new products. Methods Internal industry research reviewed included published papers, manuscript drafts, presentations, protocols, and instruments relating to consumer response measures were identified and analyzed. Peer-reviewed research was identified using PubMed and Scopus. Results Industry research on consumer response focuses on product development and marketing. To develop and refine new products, the tobacco industry has developed notable strategies for assessing consumers' sensory and subjective responses to product design characteristics. Independent research is often conducted to gauge the likelihood of future product adoption by measuring consumers' risk perceptions, responses to product, and product acceptability. Conclusions A model which conceptualizes consumer response as comprising the separate, but interacting domains of product perceptions and response to product is outlined. Industry and independent research supports the dual domain model, and provides a wide range of methods for assessment of the construct components of consumer response. Further research is needed to validate consumer response constructs, determine the relationship between consumer response and tobacco user behavior, and improve reliability of consumer response measures. Scientifically rigorous consumer response assessment methods will provide a needed empirical basis for future regulation of PREPs and new products, to counteract tobacco industry influence on consumers, and enhance the public health. PMID:19959675

16 CFR 1209.1 - Scope and application.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS INTERIM... part 1209, an interim consumer product safety standard, prescribes flame resistance and corrosiveness requirements for cellulose insulation that is a consumer product. These requirements are intended to reduce or...

16 CFR § 1209.1 - Scope and application.

Code of Federal Regulations, 2013 CFR

2013-01-01

...§ 1209.1 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS.... This part 1209, an interim consumer product safety standard, prescribes flame resistance and corrosiveness requirements for cellulose insulation that is a consumer product. These requirements are intended...

16 CFR 1209.1 - Scope and application.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS INTERIM... part 1209, an interim consumer product safety standard, prescribes flame resistance and corrosiveness requirements for cellulose insulation that is a consumer product. These requirements are intended to reduce or...

16 CFR 1209.1 - Scope and application.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS INTERIM... part 1209, an interim consumer product safety standard, prescribes flame resistance and corrosiveness requirements for cellulose insulation that is a consumer product. These requirements are intended to reduce or...

16 CFR 1102.6 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE Background and Definitions § 1102.6 Definitions. (a... Database. (2) Commission or CPSC means the Consumer Product Safety Commission. (3) Consumer product means a... private labeler. (7) Publicly Available Consumer Product Safety Information Database, also referred to as...

16 CFR 1102.6 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE Background and Definitions § 1102.6 Definitions. (a... Database. (2) Commission or CPSC means the Consumer Product Safety Commission. (3) Consumer product means a... private labeler. (7) Publicly Available Consumer Product Safety Information Database, also referred to as...

Nudging to prevent the purchase of incompatible digital products online: An experimental study.

PubMed

Esposito, Gabriele; Hernández, Penélope; van Bavel, René; Vila, José

2017-01-01

Ensuring safe and satisfactory online shopping activity, especially among vulnerable consumers such as elderly and less educated citizens, is part of a larger set of consumer policy objectives seeking to strengthen trust in the electronic marketplace. This article contributes to that goal by testing the effectiveness of nudges intended to prevent the purchase of 'incompatible' digital products (i.e., those which cannot be used with the devices owned by consumers or the systems they operate). We ran a computerised lab experiment (n = 626) examining three types of nudges, the effects of age and education, and interaction effects between these variables and the nudges. Results show that emotive warning messages and placing incompatibility information at the checkout page rather than earlier in the purchasing process were effective in reducing the purchase of incompatible goods. Age was also a relevant factor: older participants were more likely to purchase incompatible goods. In addition, there was an interaction effect between all nudges and age: two nudges exacerbated the effect of age, while another mitigated it. These results suggest nudges can be an effective policy tool, confirm a generational gap in online behaviour, and highlight how nudges can moderate the effect of socio-demographic variables.

Nudging to prevent the purchase of incompatible digital products online: An experimental study

PubMed Central

Esposito, Gabriele; Hernández, Penélope; van Bavel, René; Vila, José

2017-01-01

Ensuring safe and satisfactory online shopping activity, especially among vulnerable consumers such as elderly and less educated citizens, is part of a larger set of consumer policy objectives seeking to strengthen trust in the electronic marketplace. This article contributes to that goal by testing the effectiveness of nudges intended to prevent the purchase of 'incompatible' digital products (i.e., those which cannot be used with the devices owned by consumers or the systems they operate). We ran a computerised lab experiment (n = 626) examining three types of nudges, the effects of age and education, and interaction effects between these variables and the nudges. Results show that emotive warning messages and placing incompatibility information at the checkout page rather than earlier in the purchasing process were effective in reducing the purchase of incompatible goods. Age was also a relevant factor: older participants were more likely to purchase incompatible goods. In addition, there was an interaction effect between all nudges and age: two nudges exacerbated the effect of age, while another mitigated it. These results suggest nudges can be an effective policy tool, confirm a generational gap in online behaviour, and highlight how nudges can moderate the effect of socio-demographic variables. PMID:28282401

16 CFR § 1304.1 - Scope and application.

Code of Federal Regulations, 2013 CFR

2013-01-01

...§ 1304.1 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS... application. (a) In this part 1304 the Consumer Product Safety Commission declares that consumer patching... fibers can become airborne under reasonably foreseeable conditions of use, are banned hazardous products...

16 CFR § 1102.6 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE Background and Definitions § 1102.6 Definitions. (a... Database. (2) Commission or CPSC means the Consumer Product Safety Commission. (3) Consumer product means a... private labeler. (7) Publicly Available Consumer Product Safety Information Database, also referred to as...

The pursuit of optimal distinctiveness and consumer preferences.

PubMed

He, Lingnan; Cong, Feng; Liu, Yanping; Zhou, Xinyue

2010-10-01

This article investigates the effect of optimal distinctiveness on consumer product consumption. The authors argue that consumers acquire and display material possessions to restore their optimal levels of distinctiveness. Results showed that placing consumers in a state of low distinctiveness increased desire to acquire distinctive products, whereas perceptions of high distinctiveness reduced desire to acquire such products. Consumers' desire for distinctiveness-related products held true for various consumer choices, including willingness to pay more for limited-edition products and preference for unpopular gifts. This finding has implications for understanding consumer choice in expressing identity. © 2010 The Authors. Scandinavian Journal of Psychology © 2010 The Scandinavian Psychological Associations.

Polybrominated diphenyl ethers in articles: a review of its applications and legislation.

PubMed

Jinhui, Li; Yuan, Chen; Wenjing, Xiao

2017-02-01

Polybrominated diphenyl ethers (PBDEs), especially commercial decabrominated diphenyl ethers (c-decaBDE), have been widely produced and applied to numerous materials because of their highly effective flame-retardant capabilities. The production of commercial pentaBDE (c-pentaBDE) and commercial octaBDE (c-octaBDE) ended in 2004 because they are persistent, bioaccumulative, and toxic to both humans and the environment, but decaBDE production and use continue. Furthermore, many congeners of PBDEs are still prevalent in consumer products and articles that they pose enormous threat to both the environment and human health. PBDEs have been detected in the casing of electrical and electronic equipment, textile materials, automotive interiors, polyurethane foam (PUF) in seat cushions, children's toys, kitchenware, and other products. With increasing evidence about PBDE pollution and the adoption of international conventions, many developed countries have drawn more public attention to PBDEs and developed sound strategies for their management. This review summaries the utilization and management of PBDEs in a number of countries and reaches the conclusion that PBDEs are still prevalent in consumer articles, while specific regulations or policies for articles containing PBDEs are rare. Public awareness should be raised on the importance of sound management of articles containing PBDEs.

Dealing with consumer differences in liking during repeated exposure to food; typical dynamics in rating behavior.

PubMed

Dalenberg, Jelle R; Nanetti, Luca; Renken, Remco J; de Wijk, René A; Ter Horst, Gert J

2014-01-01

Consumers show high interindividual variability in food liking during repeated exposure. To investigate consumer liking during repeated exposure, data is often interpreted on a product level by averaging results over all consumers. However, a single product may elicit inconsistent behaviors in consumers; averaging will mix and hide possible subgroups of consumer behaviors, leading to a misinterpretation of the results. To deal with the variability in consumer liking, we propose to use clustering on data from consumer-product combinations to investigate the nature of the behavioral differences within the complete dataset. The resulting behavioral clusters can then be used to describe product acceptance. To test this approach we used two independent data sets in which young adults were repeatedly exposed to drinks and snacks, respectively. We found that five typical consumer behaviors existed in both datasets. These behaviors differed both in the average level of liking as well as its temporal dynamics. By investigating the distribution of a single product across typical consumer behaviors, we provide more precise insight in how consumers divide in subgroups based on their product liking (i.e. product modality). This work shows that taking into account and using interindividual differences can unveil information about product acceptance that would otherwise be ignored.

Dealing with Consumer Differences in Liking during Repeated Exposure to Food; Typical Dynamics in Rating Behavior

PubMed Central

Dalenberg, Jelle R.; Nanetti, Luca; Renken, Remco J.; de Wijk, René A.; ter Horst, Gert J.

2014-01-01

Consumers show high interindividual variability in food liking during repeated exposure. To investigate consumer liking during repeated exposure, data is often interpreted on a product level by averaging results over all consumers. However, a single product may elicit inconsistent behaviors in consumers; averaging will mix and hide possible subgroups of consumer behaviors, leading to a misinterpretation of the results. To deal with the variability in consumer liking, we propose to use clustering on data from consumer-product combinations to investigate the nature of the behavioral differences within the complete dataset. The resulting behavioral clusters can then be used to describe product acceptance. To test this approach we used two independent data sets in which young adults were repeatedly exposed to drinks and snacks, respectively. We found that five typical consumer behaviors existed in both datasets. These behaviors differed both in the average level of liking as well as its temporal dynamics. By investigating the distribution of a single product across typical consumer behaviors, we provide more precise insight in how consumers divide in subgroups based on their product liking (i.e. product modality). This work shows that taking into account and using interindividual differences can unveil information about product acceptance that would otherwise be ignored. PMID:24667832

16 CFR 1303.1 - Scope and application.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS BAN OF LEAD-CONTAINING PAINT AND CERTAIN CONSUMER PRODUCTS BEARING LEAD-CONTAINING PAINT § 1303.1 Scope and application. (a) In this part 1303, the Consumer Product Safety Commission declares that paint and similar surface...

16 CFR 1303.1 - Scope and application.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS BAN OF LEAD-CONTAINING PAINT AND CERTAIN CONSUMER PRODUCTS BEARING LEAD-CONTAINING PAINT § 1303.1 Scope and application. (a) In this part 1303, the Consumer Product Safety Commission declares that paint and similar surface...

16 CFR 1303.1 - Scope and application.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS BAN OF LEAD-CONTAINING PAINT AND CERTAIN CONSUMER PRODUCTS BEARING LEAD-CONTAINING PAINT § 1303.1 Scope and application. (a) In this part 1303, the Consumer Product Safety Commission declares that paint and similar surface...

The Influence of Purchasing Context and Reversibility of Choice on Consumer Responses Toward Personalized Products and Standardized Products.

PubMed

Choi, Jieun; Lee, Doo-Hee; Taylor, Charles R

2016-04-01

Existing research on personalization has found that consumers generally prefer personalized products over standardized ones. This study argued that consumer preference for personalized products is dependent on purchasing context and reversibility of choice. Results of an experiment conducted in this study found that consumers preferred personalized products when purchasing an item for personal use but preferred standardized products when purchasing an item as a gift. However, the effects of purchasing context were negated when consumers were given the assurance that personalized products could be returned (reversibility of choice); when presented with reversibility of choice, consumers preferred personalized products over standardized products regardless of purchasing context. Theoretical and managerial implications of these results were discussed. © The Author(s) 2016.

Emissions of brominated flame retardants in Asia: consideration of its potential risk form the view point of the Norwegian regulation

NASA Astrophysics Data System (ADS)

Kikuchi, Ryunosuke; Gerardo, Romeu; Gorbacheva, Tamara

2010-05-01

Flame retardants can be divided into two broad categories: additive or reactive, which can be further more divided into brominated or non-brominated sub-categories. These retardants are found in many commercial products such as computers, television sets, furniture, carpets, etc. They are of environmental concern due to their persistence, potential for bioaccumulation and widespread distribution via atmospheric transport, and possible adverse effects in wildlife and humans. Tetrabromobisphenol-A (TBBPA) is mainly used in electrical and electronic appliances (circuit board in particular), and the application of TBBPA accounts for about two thirds of the global production of brominated flame retardant (BFR). The European Union Risk Assessment does not support the restriction of TBBPA: i.e. no risk is identified for the reactive use of TBBPA such as in epoxy resin used in circuit boards. By contrast, in 2007 Norway notified the World Trade Organization of its intention to prohibit 18 substances from consumer goods (Notification No. 2007/9016/N), called the Prohibition on Certain Hazardous Substances in Consumer Products (PoHS). TBBPA is listed in this prohibition list. Marine conservation is recognized as a key issue in Norwegian fishery management e.g. wastewater management in the framework of the North Sea Declarations. TBBPA is very water-soluble, and dimethyl-TBBPA is lipophilic and may accumulate in fat. TBBPA is not readily biodegradable and can have long-term effects in the aquatic environment. Norwegian examples are summarized: TBBPA was found in marine sediment samples from Tromsø harbor (northern Norway) and in Atlantic cod from Lofoten and Varanger; TBBPA has been detected in Norwegian peregrine falcon and golden eagle eggs; and TBBPA has been detected in the blood in the general population of Norway. From these viewpoints, it can be considered that Norway needs to strictly control TBBPA emissions. In recent times, Asia has emerged as one of the leading centers for electronics production worldwide. China, Thailand, Malaysia and the Philippines are now in the forefront of electronics production worldwide, responsible for producing 50% of electrical and electronic equipment intended for developed country consumers. About 120 thousand tons/year of TBBPA are consumed worldwide, of which 75% is used in Asia, 15% in the USA and 9% in Europe. The great consumption of TBBPA in Asia indicates possible negative effects on the regional environment (aquatic environment in particular). A comparative study of sediments in rivers and costal zones shows 49.3 ng/g of polybrominated diphenyl ethers (PBDE) (one type of BFR) in Pearl River Delta (China), 94.7 ng/g in Dongjiang River (China), 0.5 ng/g in Portugal, 0.53 ng/g in Denmark, 0.6-17.6 ng/g in Netherlands. Nearly one billion people predominantly in Asia rely on fish for at least 30% of animal protein supply, so marine conservation is an important regional. In the Asia Pacific region, most data have been acquired from Japan, but there are few data in the other Asian regions. Although knowledge concerning the environmental effects of TBBPA in Asia is limited, the following remarks can be given: (i) considering TBBPA solubility and its bioaccumulation, the Norwegian regulation (PoHS) strictly controls TBBPA in order to conserve the marine environment and protect the human health; (ii) Asia is the greatest consumer of TBBPA (75% of the global consumption); The concentration of TBBPA-like substance (PBDE) is very high in China's river and delta; (iii) animal protein supply to Asian people mainly depends upon fish. It is concluded that the Asian consumption of TBBPA has the greatest potential for bioaccumulation in food webs. It is reported that less is known about the environmental behavior of TBBPA than for the other BFRs. A wide and detail survey is urgent in the Asian risk assessment.

Propelling plastics into the circular economy - weeding out the toxics first.

PubMed

Leslie, H A; Leonards, P E G; Brandsma, S H; de Boer, J; Jonkers, N

2016-09-01

The Stockholm Convention bans toxic chemicals on its persistent organic pollutants (POPs) list in order to promote cleaner production and prevent POPs accumulation in the global environment. The original 'dirty dozen' set of POPs has been expanded to include some of the brominated diphenyl ether flame retardants (POP-BDEs). In addition to cleaner production, there is an urgent need for increased resource efficiency to address the finite amount of raw materials on Earth. Recycling plastic enhances resource efficiency and is part of the circular economy approach, but how clean are the materials we are recycling? With the help of a new screening method and detailed analyses, we set out to investigate where these largely obsolete BDEs were showing up in Dutch automotive and electronics waste streams, calculate mass flows and determine to what extent they are entering the new product chains. Our study revealed that banned BDEs and other toxic flame retardants are found at high concentrations in certain plastic materials destined for recycling markets. They were also found in a variety of new consumer products, including children's toys. A mass flow analysis showed that 22% of all the POP-BDE in waste electrical and electronic equipment (WEEE) is expected to end up in recycled plastics because these toxic, bioaccumulative and persistent substances are currently not effectively separated out of plastic waste streams. In the automotive sector, this is 14%, while an additional 19% is expected to end up in second-hand parts (reuse). These results raise the issue of delicate trade-offs between consumer safety/cleaner production and resource efficiency. As petroleum intensive materials, plastic products ought to be repaired, reused, remanufactured and recycled, making good use of the 'inner circles' of the circular economy. Keeping hazardous substances - whether they are well known POPs or emerging contaminants - out of products and plastic waste streams could make these cycles work better for businesses, people and nature. Copyright © 2016 Elsevier Ltd. All rights reserved.

Consumer Electronics Testing to Fast-Rise EMP (Electromagnetic Pulse) (VEMPS (Vertical Electromagnetic Pulse Simulator) 2 Development)

DTIC Science & Technology

1989-06-01

Fast-Rise EMP ( VEMPS 11 Development) 12. PERSONAL AUTHOR(S) Vincent J. Ellis 13a. TYPE OF REPORT 13b. TIME COVERED 14. DATE OF REPORT (Year Mot.Dy...SUBJECT TERMS (Continue on reverse if necessary andJ identity by block nwitib") 09EL 03U SBGR EMP, VEMPS 11, consumer electronics, FEMPS, EMP simulation... VEMPS 11), Because of the unique petrr! ance characteristics of VEMPS 11 and the technological changes In consumer electronics over the past 10 years

Consumer behaviour survey for assessing exposure from consumer products: a feasibility study.

PubMed

Schneider, Klaus; Recke, Selina; Kaiser, Eva; Götte, Sebastian; Berkefeld, Henrike; Lässig, Juliane; Rüdiger, Thomas; Lindtner, Oliver; Oltmanns, Jan

2018-05-23

Evaluating chemical exposures from consumer products is an essential part of chemical safety assessments under REACH and may also be important to demonstrate compliance with consumer product legislation. Modelling of consumer exposure needs input information on the substance (e.g. vapour pressure), the product(s) containing the substance (e.g. concentration) and on consumer behaviour (e.g. use frequency and amount of product used). This feasibility study in Germany investigated methods for conducting a consumer survey in order to identify and retrieve information on frequency, duration, use amounts and use conditions for six example product types (four mixtures, two articles): hand dishwashing liquid, cockpit spray, fillers, paints and lacquers, shoes made of rubber or plastic, and ball-pens/pencils. Retrospective questionnaire methods (Consumer Product Questionnaire (CPQ), and Recall-Foresight Questionnaire (RFQ)) as well as protocol methods (written reporting by participants and video documentation) were used. A combination of retrospective questionnaire and written protocol methods was identified to provide valid information in a resource-efficient way. Relevant information, which can readily be used in exposure modelling, was obtained for all parameters and product types investigated. Based on the observations in this feasibility study, recommendations are given for designing a large consumer survey.

Morphology, spatial distribution, and concentration of flame retardants in consumer products and environmental dusts using scanning electron microscopy and Raman micro-spectroscopy.

PubMed

Wagner, Jeff; Ghosal, Sutapa; Whitehead, Todd; Metayer, Catherine

2013-09-01

We characterized flame retardant (FR) morphologies and spatial distributions in 7 consumer products and 7 environmental dusts to determine their implications for transfer mechanisms, human exposure, and the reproducibility of gas chromatography-mass spectrometry (GC-MS) dust measurements. We characterized individual particles using scanning electron microscopy/energy dispersive x-ray spectroscopy (SEM/EDS) and Raman micro-spectroscopy (RMS). Samples were screened for the presence of 3 FR constituents (bromine, phosphorous, non-salt chlorine) and 2 metal synergists (antimony and bismuth). Subsequent analyses of select samples by RMS enabled molecular identification of the FR compounds and matrix materials. The consumer products and dust samples possessed FR elemental weight percents of up to 36% and 31%, respectively. We identified 24 FR-containing particles in the dust samples and classified them into 9 types based on morphology and composition. We observed a broad range of morphologies for these FR-containing particles, suggesting FR transfer to dust via multiple mechanisms. We developed an equation to describe the heterogeneity of FR-containing particles in environmental dust samples. The number of individual FR-containing particles expected in a 1-mg dust sample with a FR concentration of 100ppm ranged from <1 to >1000 particles. The presence of rare, high-concentration bromine particles was correlated with decabromodiphenyl ether concentrations obtained via GC-MS. When FRs are distributed heterogeneously in highly concentrated dust particles, human exposure to FRs may be characterized by high transient exposures interspersed by periods of low exposure, and GC-MS FR concentrations may exhibit large variability in replicate subsamples. Current limitations of this SEM/EDS technique include potential false negatives for volatile and chlorinated FRs and greater quantitation uncertainty for brominated FR in aluminum-rich matrices. Copyright © 2013 Elsevier Ltd. All rights reserved.

77 FR 32951 - Commission Agenda and Priorities; Notice of Hearing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-04

... CONSUMER PRODUCT SAFETY COMMISSION Commission Agenda and Priorities; Notice of Hearing AGENCY: U.S. Consumer Product Safety Commission. ACTION: Notice of public hearing. SUMMARY: The U.S. Consumer Product... Secretary, U.S. Consumer Product Safety Commission, 4330 East West Highway, Bethesda, MD 20814, no later...

16 CFR 1115.5 - Reporting of failures to comply with a voluntary consumer product safety standard relied upon by...

Code of Federal Regulations, 2010 CFR

2010-01-01

... voluntary consumer product safety standard relied upon by the Commission under section 9 of the CPSA. 1115.5 Section 1115.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SUBSTANTIAL PRODUCT HAZARD REPORTS General Interpretation § 1115.5 Reporting of failures to comply...

77 FR 27230 - Agency Information Collection Activities; Submission for Office of Management and Budget Review...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-09

...) Consumers Union (see Attachment 2 of the Consumers Union comments), which publishes Consumer Reports and (2) The Personal Care Products Council (PCPC) jointly with The Consumer Healthcare Products Association... care products industry and the cosmetics industry in the United States, respectively. The Consumers...

Stretchable, Twisted Conductive Microtubules for Wearable Computing, Robotics, Electronics, and Healthcare.

PubMed

Do, Thanh Nho; Visell, Yon

2017-05-11

Stretchable and flexible multifunctional electronic components, including sensors and actuators, have received increasing attention in robotics, electronics, wearable, and healthcare applications. Despite advances, it has remained challenging to design analogs of many electronic components to be highly stretchable, to be efficient to fabricate, and to provide control over electronic performance. Here, we describe highly elastic sensors and interconnects formed from thin, twisted conductive microtubules. These devices consist of twisted assemblies of thin, highly stretchable (>400%) elastomer tubules filled with liquid conductor (eutectic gallium indium, EGaIn), and fabricated using a simple roller coating process. As we demonstrate, these devices can operate as multimodal sensors for strain, rotation, contact force, or contact location. We also show that, through twisting, it is possible to control their mechanical performance and electronic sensitivity. In extensive experiments, we have evaluated the capabilities of these devices, and have prototyped an array of applications in several domains of stretchable and wearable electronics. These devices provide a novel, low cost solution for high performance stretchable electronics with broad applications in industry, healthcare, and consumer electronics, to emerging product categories of high potential economic and societal significance.

Practical Use Of It In Traceability In Food Value Chains

NASA Astrophysics Data System (ADS)

Ratcliff, Jon; Boddington, Michael

Traceability is today considered an essential requirement for the food value chain due to the need to provide consumers with accurate information in the event of food safety recalls, to provide assurance with regard the source and production systems for food products and in certain countries to comply with government legislation. Within an individual business traceability can be quite simple to implement, however, in a global trading market, traceability of the entire supply chain, including logistics is extremely complex. For this reason IT solutions such as TraceTracker have been developed which not only provide electronic solutions for complete traceability but also allow products to be tracked at any point in the supply chain.

77 FR 11156 - Notice of Receipt of Complaint; Solicitation of Comments Relating to the Public Interest

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-24

... Certain Consumer Electronics, Including Mobile Phones and Tablets, DN 2878; the Commission is soliciting... importation of certain consumer electronics, including mobile phones and tablets. The complaint names as...

Is the linear modeling technique good enough for optimal form design? A comparison of quantitative analysis models.

PubMed

Lin, Yang-Cheng; Yeh, Chung-Hsing; Wang, Chen-Cheng; Wei, Chun-Chun

2012-01-01

How to design highly reputable and hot-selling products is an essential issue in product design. Whether consumers choose a product depends largely on their perception of the product image. A consumer-oriented design approach presented in this paper helps product designers incorporate consumers' perceptions of product forms in the design process. The consumer-oriented design approach uses quantification theory type I, grey prediction (the linear modeling technique), and neural networks (the nonlinear modeling technique) to determine the optimal form combination of product design for matching a given product image. An experimental study based on the concept of Kansei Engineering is conducted to collect numerical data for examining the relationship between consumers' perception of product image and product form elements of personal digital assistants (PDAs). The result of performance comparison shows that the QTTI model is good enough to help product designers determine the optimal form combination of product design. Although the PDA form design is used as a case study, the approach is applicable to other consumer products with various design elements and product images. The approach provides an effective mechanism for facilitating the consumer-oriented product design process.

Is the Linear Modeling Technique Good Enough for Optimal Form Design? A Comparison of Quantitative Analysis Models

PubMed Central

Lin, Yang-Cheng; Yeh, Chung-Hsing; Wang, Chen-Cheng; Wei, Chun-Chun

2012-01-01

How to design highly reputable and hot-selling products is an essential issue in product design. Whether consumers choose a product depends largely on their perception of the product image. A consumer-oriented design approach presented in this paper helps product designers incorporate consumers' perceptions of product forms in the design process. The consumer-oriented design approach uses quantification theory type I, grey prediction (the linear modeling technique), and neural networks (the nonlinear modeling technique) to determine the optimal form combination of product design for matching a given product image. An experimental study based on the concept of Kansei Engineering is conducted to collect numerical data for examining the relationship between consumers' perception of product image and product form elements of personal digital assistants (PDAs). The result of performance comparison shows that the QTTI model is good enough to help product designers determine the optimal form combination of product design. Although the PDA form design is used as a case study, the approach is applicable to other consumer products with various design elements and product images. The approach provides an effective mechanism for facilitating the consumer-oriented product design process. PMID:23258961

Products Claiming to "Cure" Cancer Are a Cruel Deception

MedlinePlus

... Products For Consumers Home For Consumers Consumer Updates Products Claiming to "Cure" Cancer Are a Cruel Deception ... About FDA Contact FDA Browse by Product Area Product Areas back Food Drugs Medical Devices Radiation-Emitting ...

Early detection of fungal contamination on green coffee by a MOX sensors based Electronic Nose

NASA Astrophysics Data System (ADS)

Sberveglieri, V.; Concina, I.; Falasconi, M.; Gobbi, E.; Pulvirenti, A.; Fava, P.

2011-09-01

Fungal growth can occur on green coffee beans along all the distribution chain, eventually bringing on health hazards to consumers, because of the production of toxic metabolites (mycotoxins) [1]. Besides, the sensorial contamination due to volatiles by-products of fungal metabolism could cause defects on coffee also after roasting. Therefore, it is necessary to devise strategies to detect and quantify fungal infection and toxin production at early stages of the food chain. One of the most promising techniques is the analysis of volatile compounds in the headspace gas surrounding the samples. The aim of this work was to verify the ability of the Electronic Nose (EN EOS835) to early detect the microbial contamination of Arabica green coffee. This EN is equipped with Metal Oxide Semiconductor sensor array. Gas chromatography coupled to mass spectrometry (GC-MS) analysis of the static headspace of non-contaminated Arabica green coffee samples was carried out to confirm the EN ability to provide satisfactory indications about the presence of contamination.

JPRS Report, East Europe.

DTIC Science & Technology

1990-01-29

especially those involving consumer would not solve the problem. Only the combined effect electronics and tourism . If today we are selling roughly of...were obtained in most of the No 10, 1989pp 20-29 important industries and branches, as well as in key products of a classic industrial character such as...year it was on the industrial output during the first three postwar decades agenda of the CC CPCZ economic commission, subse- was about 2.5-3 times

Physiological function of hydrogen metabolism during growth of sulfidogenic bacteria on organic substrates.

PubMed Central

Lupton, F S; Conrad, R; Zeikus, J G

1984-01-01

Desulfovibrio vulgaris Madison and Thermodesulfobacterium commune contained functionally distinct hydrogenase activities, one which exchanged 3H2 into 3H2O and was inhibited by carbon monoxide and a second activity which produced H2 in the presence of CO. Cell suspensions of D. vulgaris used either lactate, pyruvate, or CO as the electron donor for H2 production in the absence of sulfate. Both sulfidogenic species produced and consumed hydrogen as a trace gas during growth on lactate or pyruvate as electron donors and on thiosulfate or sulfate as electron acceptors. Higher initial levels of hydrogen were detected during growth on lactate-sulfate than on pyruvate-sulfate. D. vulgaris but not T. commune also produced and then consumed CO during growth on organic electron donors and sulfate or thiosulfate. High partial pressures of exogenous H2 inhibited growth and substrate consumption when D. vulgaris was cultured on pyruvate alone but not when it was metabolizing pyruvate plus sulfate or lactate plus sulfate. The data are discussed in relation to supporting two different models for the physiological function of H2 metabolism during growth of sulfidogenic bacteria on organic electron donors plus sulfate. A trace H2 transformation model is proposed for control of redox processes during growth on either pyruvate or lactate plus sulfate, and an obligate H2 cycling model is proposed for chemiosmotic energy coupling during growth on CO plus sulfate. PMID:6480553

78 FR 37797 - Commission Agenda and Priorities; Notice of Hearing

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-24

... CONSUMER PRODUCT SAFETY COMMISSION Commission Agenda and Priorities; Notice of Hearing AGENCY: U.S. Consumer Product Safety Commission. ACTION: Notice of public hearing. SUMMARY: The U.S. Consumer Product... mailed or delivered to the Office of the Secretary, U.S. Consumer Product Safety Commission, 4330 East...

75 FR 27504 - Substantial Product Hazard List: Hand-Held Hair Dryers

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-17

...The Consumer Product Safety Improvement Act of 2008 (``CPSIA''), authorizes the United States Consumer Product Safety Commission (``Commission'') to specify, by rule, for any consumer product or class of consumer products, characteristics whose existence or absence shall be deemed a substantial product hazard under certain circumstances. In this document, the Commission is proposing a rule to determine that any hand-held hair dryer without integral immersion protection presents a substantial product hazard.

Materialism, status consumption, and consumer independence.

PubMed

Goldsmith, Ronald Earl; Clark, Ronald A

2012-01-01

Materialism influences many people. We focus on two aspects of this influence: reactions to prestige products and to the influence of others. A study of 187 U.S. student consumers shows that materialism is positively related to buying products that confer status. In contrast, materialism is negatively related to consumer independence, an enduring tendency to pay minimal attention to the prescribed norms of other consumers and to make product and brand decisions according to personal preferences. Consuming products for status is also negatively related to consumer independence. Moreover, the association between materialism and consumer independence is completely mediated by consuming for status. Materialism urges consumers to be status conscious so that they follow social norms in purchasing, but seeking status through goods is avoided by less materialistic, independent consumers. A second study (n = 258) also using student consumers confirmed these results.

Screen printed passive components for flexible power electronics

NASA Astrophysics Data System (ADS)

Ostfeld, Aminy E.; Deckman, Igal; Gaikwad, Abhinav M.; Lochner, Claire M.; Arias, Ana C.

2015-10-01

Additive and low-temperature printing processes enable the integration of diverse electronic devices, both power-supplying and power-consuming, on flexible substrates at low cost. Production of a complete electronic system from these devices, however, often requires power electronics to convert between the various operating voltages of the devices. Passive components—inductors, capacitors, and resistors—perform functions such as filtering, short-term energy storage, and voltage measurement, which are vital in power electronics and many other applications. In this paper, we present screen-printed inductors, capacitors, resistors and an RLC circuit on flexible plastic substrates, and report on the design process for minimization of inductor series resistance that enables their use in power electronics. Printed inductors and resistors are then incorporated into a step-up voltage regulator circuit. Organic light-emitting diodes and a flexible lithium ion battery are fabricated and the voltage regulator is used to power the diodes from the battery, demonstrating the potential of printed passive components to replace conventional surface-mount components in a DC-DC converter application.

Screen printed passive components for flexible power electronics

PubMed Central

Ostfeld, Aminy E.; Deckman, Igal; Gaikwad, Abhinav M.; Lochner, Claire M.; Arias, Ana C.

2015-01-01

Additive and low-temperature printing processes enable the integration of diverse electronic devices, both power-supplying and power-consuming, on flexible substrates at low cost. Production of a complete electronic system from these devices, however, often requires power electronics to convert between the various operating voltages of the devices. Passive components—inductors, capacitors, and resistors—perform functions such as filtering, short-term energy storage, and voltage measurement, which are vital in power electronics and many other applications. In this paper, we present screen-printed inductors, capacitors, resistors and an RLC circuit on flexible plastic substrates, and report on the design process for minimization of inductor series resistance that enables their use in power electronics. Printed inductors and resistors are then incorporated into a step-up voltage regulator circuit. Organic light-emitting diodes and a flexible lithium ion battery are fabricated and the voltage regulator is used to power the diodes from the battery, demonstrating the potential of printed passive components to replace conventional surface-mount components in a DC-DC converter application. PMID:26514331

Screen printed passive components for flexible power electronics.

PubMed

Ostfeld, Aminy E; Deckman, Igal; Gaikwad, Abhinav M; Lochner, Claire M; Arias, Ana C

2015-10-30

Additive and low-temperature printing processes enable the integration of diverse electronic devices, both power-supplying and power-consuming, on flexible substrates at low cost. Production of a complete electronic system from these devices, however, often requires power electronics to convert between the various operating voltages of the devices. Passive components-inductors, capacitors, and resistors-perform functions such as filtering, short-term energy storage, and voltage measurement, which are vital in power electronics and many other applications. In this paper, we present screen-printed inductors, capacitors, resistors and an RLC circuit on flexible plastic substrates, and report on the design process for minimization of inductor series resistance that enables their use in power electronics. Printed inductors and resistors are then incorporated into a step-up voltage regulator circuit. Organic light-emitting diodes and a flexible lithium ion battery are fabricated and the voltage regulator is used to power the diodes from the battery, demonstrating the potential of printed passive components to replace conventional surface-mount components in a DC-DC converter application.

Chyawanprash: A review of therapeutic benefits as in authoritative texts and documented clinical literature.

PubMed

Narayana, D B Anantha; Durg, Sharanbasappa; Manohar, P Ram; Mahapatra, Anita; Aramya, A R

2017-02-02

Chyawanprash (CP), a traditional immune booster recipe, has a long history of ethnic origin, development, household preparation and usage. There are even mythological stories about the origin of this recipe including its nomenclature. In the last six decades, CP, because of entrepreneurial actions of some research Vaidyas (traditional doctors) has grown to industrial production and marketing in packed forms to a large number of consumers/patients like any food or health care product. Currently, CP has acquired a large accepted user base in India and in a few countries out-side India. Authoritative texts, recognized by the Drugs and Cosmetics Act of India, describe CP as an immunity enhancer and strength giver meant for improving lung functions in diseases with compromised immunity. This review focuses on published clinical efficacy and safety studies of CP for correlation with health benefits as documented in the authoritative texts, and also briefs on its recipes and processes. Authoritative texts were searched for recipes, processes, and other technical details of CP. Labels of marketing CP products (Indian) were studied for the health claims. Electronic search for studies of CP on efficacy and safety data were performed in PubMed/MEDLINE and DHARA (Digital Helpline for Ayurveda Research Articles), and Ayurvedic books were also searched for clinical studies. The documented clinical studies from electronic databases and Ayurvedic books evidenced that individuals who consume CP regularly for a definite period of time showed improvement in overall health status and immunity. However, most of the clinical studies in this review are of smaller sample size and short duration. Further, limitation to access and review significant data on traditional products like CP in electronic databases was noted. Randomized controlled trials of high quality with larger sample size and longer follow-up are needed to have significant evidence on the clinical use of CP as immunity booster. Additional studies involving measurement of current biomarkers of immunity pre- and post-consumption of the product as well as benefits accruing with the use of CP as an adjuvant are suggested. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Regulating the disposal of cigarette butts as toxic hazardous waste.

PubMed

Barnes, Richard L

2011-05-01

The trillions of cigarette butts generated each year throughout the world pose a significant challenge for disposal regulations, primarily because there are millions of points of disposal, along with the necessity to segregate, collect and dispose of the butts in a safe manner, and cigarette butts are toxic, hazardous waste. There are some hazardous waste laws, such as those covering used tyres and automobile batteries, in which the retailer is responsible for the proper disposal of the waste, but most post-consumer waste disposal is the responsibility of the consumer. Concepts such as extended producer responsibility (EPR) are being used for some post-consumer waste to pass the responsibility and cost for recycling or disposal to the manufacturer of the product. In total, 32 states in the US have passed EPR laws covering auto switches, batteries, carpet, cell phones, electronics, fluorescent lighting, mercury thermostats, paint and pesticide containers, and these could be models for cigarette waste legislation. A broader concept of producer stewardship includes EPR, but adds the consumer and the retailer into the regulation. The State of Maine considered a comprehensive product stewardship law in 2010 that is a much better model than EPR. By using either EPR or the Maine model, the tobacco industry will be required to cover the cost of collecting and disposing of cigarette butt waste. Additional requirements included in the Maine model are needed for consumers and businesses to complete the network that will be necessary to maximise the segregation and collection of cigarette butts to protect the environment.

Regulating the disposal of cigarette butts as toxic hazardous waste

PubMed Central

2011-01-01

The trillions of cigarette butts generated each year throughout the world pose a significant challenge for disposal regulations, primarily because there are millions of points of disposal, along with the necessity to segregate, collect and dispose of the butts in a safe manner, and cigarette butts are toxic, hazardous waste. There are some hazardous waste laws, such as those covering used tyres and automobile batteries, in which the retailer is responsible for the proper disposal of the waste, but most post-consumer waste disposal is the responsibility of the consumer. Concepts such as extended producer responsibility (EPR) are being used for some post-consumer waste to pass the responsibility and cost for recycling or disposal to the manufacturer of the product. In total, 32 states in the US have passed EPR laws covering auto switches, batteries, carpet, cell phones, electronics, fluorescent lighting, mercury thermostats, paint and pesticide containers, and these could be models for cigarette waste legislation. A broader concept of producer stewardship includes EPR, but adds the consumer and the retailer into the regulation. The State of Maine considered a comprehensive product stewardship law in 2010 that is a much better model than EPR. By using either EPR or the Maine model, the tobacco industry will be required to cover the cost of collecting and disposing of cigarette butt waste. Additional requirements included in the Maine model are needed for consumers and businesses to complete the network that will be necessary to maximise the segregation and collection of cigarette butts to protect the environment. PMID:21504925

Variables influencing food perception reviewed for consumer-oriented product development.

PubMed

Sijtsema, Siet; Linnemann, Anita; van Gaasbeek, Ton; Dagevos, Hans; Jongen, Wim

2002-01-01

Consumer wishes have to be translated into product characteristics to implement consumer-oriented product development. Before this step can be made, insight in food-related behavior and perception of consumers is necessary to make the right, useful, and successful translation. Food choice behavior and consumers' perception are studied in many disciplines. Models of food behavior and preferences therefore were studied from a multidisciplinary perspective. Nearly all models structure the determinants related to the person, the food, and the environment. Consequently, the overview of models was used as a basis to structure the variables influencing food perception into a model for consumer-oriented product development. To this new model, referred to as food perception model, other variables like time and place as part of consumption moment were added. These are important variables influencing consumers' perception, and therefore of increasing importance to consumer-oriented product development nowadays. In further research, the presented food perception model is used as a tool to implement successful consumer-oriented product development.

The Use of E-Cigarettes.

PubMed

Eichler, Martin; Blettner, Maria; Singer, Susanne

2016-12-16

Electronic cigarettes (e-cigarettes) are a consumer product whose benefits and risks are currently debated. Advocates of the "tobacco harm reduction" strategy emphasize their potential as an aid to smoking cessation, while advocates of the precautionary principle emphasize their risks instead. There have been only a few studies to date on the prevalence of e-cigarette use in Germany. In May 2016, in collaboration with Forsa, an opinion research firm, we carried out a survey among 4002 randomly chosen persons aged 14 and older, asking them about their consumption of e-cigarettes with and without nicotine, reasons for using e-cigarettes, plans for future use, estimation of danger compared to that of tobacco products, smoking behavior, and sociodemographic features. 1.4% of the respondents used e-cigarettes regularly, and a further 2.2% had used them regularly in the past. 11.8% had at least tried them, including 32.7% of smokers and 2.3% of persons who had never smoked. 24.5% of ex-smokers who had quit smoking after 2010 had used e-cigarettes at least once. 20.7% of the respondents considered electronic cigarettes less dangerous than conventional cigarettes, 46.3% equally dangerous, and 16.1% more dangerous. An extrapolation of these data to the general population suggests that about one million persons in Germany use e-cigarettes regularly and another 1.55 million have done so in the past. The consumption of electronic cigarettes in Germany is not very widespread, but it is not negligible either. Nearly 1 in 8 Germans has tried e-cigarettes at least once. Regular consumers of e-cigarettes are almost exclusively smokers and ex-smokers.

Development of the Internet-Based Customer-Oriented Ordering System Framework for Complicated Mechanical Product

NASA Astrophysics Data System (ADS)

Ong, Mingwei; Watanuki, Keiichi

Recently, as consumers gradually prefer buying products that reflect their own personality, there exist some consumers who wish to involve in the product design process. Parallel with the popularization of e-business, many manufacturers have utilized the Internet to promote their products, and some have even built websites that enable consumers to select their desirable product specifications. Nevertheless, this method has not been applied on complicated mechanical product due to the facts that complicated mechanical product has a large number of specifications that inter-relate among one another. In such a case, ordinary consumers who are lacking of design knowledge, are not capable of determining these specifications. In this paper, a prototype framework called Internet-based consumer-oriented product ordering system has been developed in which it enables ordinary consumers to have large freedom in determining complicated mechanical product specifications, and meanwhile ensures that the manufacturing of the determined product is feasible.

Development of a consumer product ingredient database for chemical exposure screening and prioritization.

PubMed

Goldsmith, M-R; Grulke, C M; Brooks, R D; Transue, T R; Tan, Y M; Frame, A; Egeghy, P P; Edwards, R; Chang, D T; Tornero-Velez, R; Isaacs, K; Wang, A; Johnson, J; Holm, K; Reich, M; Mitchell, J; Vallero, D A; Phillips, L; Phillips, M; Wambaugh, J F; Judson, R S; Buckley, T J; Dary, C C

2014-03-01

Consumer products are a primary source of chemical exposures, yet little structured information is available on the chemical ingredients of these products and the concentrations at which ingredients are present. To address this data gap, we created a database of chemicals in consumer products using product Material Safety Data Sheets (MSDSs) publicly provided by a large retailer. The resulting database represents 1797 unique chemicals mapped to 8921 consumer products and a hierarchy of 353 consumer product "use categories" within a total of 15 top-level categories. We examine the utility of this database and discuss ways in which it will support (i) exposure screening and prioritization, (ii) generic or framework formulations for several indoor/consumer product exposure modeling initiatives, (iii) candidate chemical selection for monitoring near field exposure from proximal sources, and (iv) as activity tracers or ubiquitous exposure sources using "chemical space" map analyses. Chemicals present at high concentrations and across multiple consumer products and use categories that hold high exposure potential are identified. Our database is publicly available to serve regulators, retailers, manufacturers, and the public for predictive screening of chemicals in new and existing consumer products on the basis of exposure and risk. Published by Elsevier Ltd.

[Evolution of the audio-visual technologies of production and diffusion and the conditions of their application in the Third World].

PubMed

Lefebvre, M

1979-01-01

The present information production techniques are so inefficient that it is out of the question to generalize them. On the other hand audio-visual communication raises a major political problem, especially for developing countries. Audio-visual equipment has gone through adjustment phases; the example of the tape and cassette recorder is given: 2 technological improvements have completely modified its use; the transistors have allowed considerable reduction in volume and weight as well as the energy necessary; the invention of the cassette has simplified its use. Technological research is following 3 major directions: the production of equipment which consumes little energy; the improvement of electronic component production techniques (towards cheaper electronic components); finally, the designing of systems allowing to stock large quantities of information. The communication systems will probably make so much progress in the areas of technology and programming, that they will soon have very different uses than the present ones. The question is whether our civilizations will let themselves be dominated by these new systems, or whether they will succeed to turn them into progress tools.

Nitric oxide induces the alternative oxidase pathway in Arabidopsis seedlings deprived of inorganic phosphate.

PubMed

Royo, Beatriz; Moran, Jose F; Ratcliffe, R George; Gupta, Kapuganti J

2015-10-01

Phosphate starvation compromises electron flow through the cytochrome pathway of the mitochondrial electron transport chain, and plants commonly respond to phosphate deprivation by increasing flow through the alternative oxidase (AOX). To test whether this response is linked to the increase in nitric oxide (NO) production that also increases under phosphate starvation, Arabidopsis thaliana seedlings were grown for 15 d on media containing either 0 or 1mM inorganic phosphate. The effects of the phosphate supply on growth, the production of NO, respiration, the AOX level and the production of superoxide were compared for wild-type (WT) seedlings and the nitrate reductase double mutant nia. Phosphate deprivation increased NO production in WT roots, and the AOX level and the capacity of the alternative pathway to consume electrons in WT seedlings; whereas the same treatment failed to stimulate NO production and AOX expression in the nia mutant, and the plants had an altered growth phenotype. The NO donor S-nitrosoglutathione rescued the growth phenotype of the nia mutants under phosphate deprivation to some extent, and it also increased the respiratory capacity of AOX. It is concluded that NO is required for the induction of the AOX pathway when seedlings are grown under phosphate-limiting conditions. © The Author 2015. Published by Oxford University Press on behalf of the Society for Experimental Biology.

16 CFR 1115.8 - Compliance with product safety standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... applicable mandatory consumer product safety standards and to report to the Commission any products which do.... 1115.8 Section 1115.8 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SUBSTANTIAL PRODUCT HAZARD REPORTS General Interpretation § 1115.8 Compliance with...

16 CFR 682.1 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Practices FEDERAL TRADE COMMISSION THE FAIR CREDIT REPORTING ACT DISPOSAL OF CONSUMER REPORT INFORMATION AND..., whether in paper, electronic, or other form, that is a consumer report or is derived from a consumer report. Consumer information also means a compilation of such records. Consumer information does not...

16 CFR 1000.21 - Office of Compliance and Field Operations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... enforces the Consumer Product Safety Act reporting requirements. It reviews consumer complaints, conducts.... 1000.21 Section 1000.21 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL COMMISSION... identifying and addressing safety hazards in consumer products already in distribution, promoting industry...

16 CFR 1000.21 - Office of Compliance and Field Operations.

Code of Federal Regulations, 2011 CFR

2011-01-01

... enforces the Consumer Product Safety Act reporting requirements. It reviews consumer complaints, conducts.... 1000.21 Section 1000.21 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL COMMISSION... identifying and addressing safety hazards in consumer products already in distribution, promoting industry...

16 CFR 1000.21 - Office of Compliance and Field Operations.

Code of Federal Regulations, 2014 CFR

2014-01-01

... enforces the Consumer Product Safety Act reporting requirements. It reviews consumer complaints, conducts.... 1000.21 Section 1000.21 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL COMMISSION... identifying and addressing safety hazards in consumer products already in distribution, promoting industry...

16 CFR 1000.21 - Office of Compliance and Field Operations.

Code of Federal Regulations, 2012 CFR

2012-01-01

... enforces the Consumer Product Safety Act reporting requirements. It reviews consumer complaints, conducts.... 1000.21 Section 1000.21 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL COMMISSION... identifying and addressing safety hazards in consumer products already in distribution, promoting industry...

New Tobacco and Tobacco-Related Products: Early Detection of Product Development, Marketing Strategies, and Consumer Interest.

PubMed

Staal, Yvonne Cm; van de Nobelen, Suzanne; Havermans, Anne; Talhout, Reinskje

2018-05-28

A wide variety of new tobacco and tobacco-related products have emerged on the market in recent years. To understand their potential implications for public health and to guide tobacco control efforts, we have used an infoveillance approach to identify new tobacco and tobacco-related products. Our search for tobacco(-related) products consists of several tailored search profiles using combinations of keywords such as "e-cigarette" and "new" to extract information from almost 9000 preselected sources such as websites of online shops, tobacco manufacturers, and news sites. Developments in e-cigarette design characteristics show a trend toward customization by possibilities to adjust temperature and airflow, and by the large variety of flavors of e-liquids. Additionally, more e-cigarettes are equipped with personalized accessories, such as mobile phones, applications, and Bluetooth. Waterpipe products follow the trend toward electronic vaping. Various heat-not-burn products were reintroduced to the market. Our search for tobacco(-related) products was specific and timely, though advances in product development require ongoing optimization of the search strategy. Our results show a trend toward products resembling tobacco cigarettes vaporizers that can be adapted to the consumers' needs. Our search for tobacco(-related) products could aid in the assessment of the likelihood of new products to gain market share, as a possible health risk or as an indicator for the need on independent and reliable information of the product to the general public. ©Yvonne CM Staal, Suzanne van de Nobelen, Anne Havermans, Reinskje Talhout. Originally published in JMIR Public Health and Surveillance (http://publichealth.jmir.org), 28.05.2018.

75 FR 29155 - Publicly Available Consumer Product Safety Information Database

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-24

...The Consumer Product Safety Commission (``Commission,'' ``CPSC,'' or ``we'') is issuing a notice of proposed rulemaking that would establish a publicly available consumer product safety information database (``database''). Section 212 of the Consumer Product Safety Improvement Act of 2008 (``CPSIA'') amended the Consumer Product Safety Act (``CPSA'') to require the Commission to establish and maintain a publicly available, searchable database on the safety of consumer products, and other products or substances regulated by the Commission. The proposed rule would interpret various statutory requirements pertaining to the information to be included in the database and also would establish provisions regarding submitting reports of harm; providing notice of reports of harm to manufacturers; publishing reports of harm and manufacturer comments in the database; and dealing with confidential and materially inaccurate information.

16 CFR 1302.1 - Scope and application.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS BAN OF... Product Safety Commission (Commission) declares extremely flammable contact adhesives and similar liquid or semiliquid consumer products to be banned hazardous products under sections 8 and 9 of the...

16 CFR 1302.1 - Scope and application.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS BAN OF... Product Safety Commission (Commission) declares extremely flammable contact adhesives and similar liquid or semiliquid consumer products to be banned hazardous products under sections 8 and 9 of the...

16 CFR 1302.1 - Scope and application.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS BAN OF... Product Safety Commission (Commission) declares extremely flammable contact adhesives and similar liquid or semiliquid consumer products to be banned hazardous products under sections 8 and 9 of the...

The Effect Of Atributes Product’s Analysis, Halal Certification, And Product Innovation To The Interest Of Consumer Buying-Back Through The Advantage Competitive Of Micro Small And Medium Business (MSMB) In Medan

NASA Astrophysics Data System (ADS)

Aditi, Bunga

2017-12-01

This research is done to know and analyzing the effect of attribute, halal certification product, and product innovation on the competitiveness of Micro Small and Medium Business in Medan, knowing and analyzing the effect of product attribute, halal certification, and product innovation to consumer buying surge. The type of research used is explanatory research with quantitative approach. The population in this study is the community as consumers who are in the area of Medan province of North Sumatera. Total sample of 150 people. Sampling method which use an accidental sampling is the technique of determining samples by chance, example: consumers whomeets with researcher coincidentally can be sampled if the consumer is appropriate or suitable as a source of data. This research uses the method of Structural Equation Modeling analysis. The mainting of this research is showed that product attributes, halal certification, and product innovation had a positive and significant impact on competitive advantage which impact on consumer buy-back (surge) interest. The advantage competitive has affects consumer buying surge interest positively. Keywords: Product attributes, halal certification, product innovation, competitive advantage, consumer buying interest

Consumer brand choice: individual and group analyses of demand elasticity.

PubMed

Oliveira-Castro, Jorge M; Foxall, Gordon R; Schrezenmaier, Teresa C

2006-03-01

Following the behavior-analytic tradition of analyzing individual behavior, the present research investigated demand elasticity of individual consumers purchasing supermarket products, and compared individual and group analyses of elasticity. Panel data from 80 UK consumers purchasing 9 product categories (i.e., baked beans, biscuits, breakfast cereals, butter, cheese, fruit juice, instant coffee, margarine and tea) during a 16-week period were used. Elasticity coefficients were calculated for individual consumers with data from all or only 1 product category (intra-consumer elasticities), and for each product category using all data points from all consumers (overall product elasticity) or 1 average data point per consumer (interconsumer elasticity). In addition to this, split-sample elasticity coefficients were obtained for each individual with data from all product categories purchased during weeks 1 to 8 and 9 to 16. The results suggest that: 1) demand elasticity coefficients calculated for individual consumers purchasing supermarket food products are compatible with predictions from economic theory and behavioral economics; 2) overall product elasticities, typically employed in marketing and econometric research, include effects of interconsumer and intraconsumer elasticities; 3) when comparing demand elasticities of different product categories, group and individual analyses yield similar trends; and 4) individual differences in demand elasticity are relatively consistent across time, but do not seem to be consistent across products. These results demonstrate the theoretical, methodological, and managerial relevance of investigating the behavior of individual consumers.

Consumer Brand Choice: Individual and Group Analyses of Demand Elasticity

PubMed Central

Oliveira-Castro, Jorge M; Foxall, Gordon R; Schrezenmaier, Teresa C

2006-01-01

Following the behavior-analytic tradition of analyzing individual behavior, the present research investigated demand elasticity of individual consumers purchasing supermarket products, and compared individual and group analyses of elasticity. Panel data from 80 UK consumers purchasing 9 product categories (i.e., baked beans, biscuits, breakfast cereals, butter, cheese, fruit juice, instant coffee, margarine and tea) during a 16-week period were used. Elasticity coefficients were calculated for individual consumers with data from all or only 1 product category (intra-consumer elasticities), and for each product category using all data points from all consumers (overall product elasticity) or 1 average data point per consumer (interconsumer elasticity). In addition to this, split-sample elasticity coefficients were obtained for each individual with data from all product categories purchased during weeks 1 to 8 and 9 to 16. The results suggest that: 1) demand elasticity coefficients calculated for individual consumers purchasing supermarket food products are compatible with predictions from economic theory and behavioral economics; 2) overall product elasticities, typically employed in marketing and econometric research, include effects of interconsumer and intraconsumer elasticities; 3) when comparing demand elasticities of different product categories, group and individual analyses yield similar trends; and 4) individual differences in demand elasticity are relatively consistent across time, but do not seem to be consistent across products. These results demonstrate the theoretical, methodological, and managerial relevance of investigating the behavior of individual consumers. PMID:16673823

76 FR 22019 - Safety Standard for Toddler Beds

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-20

... warnings should increase consumers' understanding of the connection between the relevant behaviors and... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Part 1217 RIN 3041-AC79 Safety Standard for Toddler Beds AGENCY: Consumer Product Safety Commission. ACTION: Final rule. SUMMARY: The Consumer Product Safety...

16 CFR 303.30 - Textile fiber products in form for consumer.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Textile fiber products in form for consumer... products in form for consumer. A textile fiber product shall be considered to be in the form intended for sale or delivery to, or for use by, the ultimate consumer when the manufacturing or processing of the...

16 CFR 303.30 - Textile fiber products in form for consumer.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Textile fiber products in form for consumer... products in form for consumer. A textile fiber product shall be considered to be in the form intended for sale or delivery to, or for use by, the ultimate consumer when the manufacturing or processing of the...

16 CFR 1302.4 - Banned hazardous products.

Code of Federal Regulations, 2012 CFR

2012-01-01

... flammable contact adhesive and similar liquid or semiliquid consumer product as defined in § 1302.3 (b... hazardous product. In addition, any other extremely flammable contact adhesive and similar liquid or... 1302.4 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS...

16 CFR 1302.4 - Banned hazardous products.

Code of Federal Regulations, 2011 CFR

2011-01-01

... flammable contact adhesive and similar liquid or semiliquid consumer product as defined in § 1302.3 (b... hazardous product. In addition, any other extremely flammable contact adhesive and similar liquid or... 1302.4 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS...

16 CFR 1302.4 - Banned hazardous products.

Code of Federal Regulations, 2014 CFR

2014-01-01

... flammable contact adhesive and similar liquid or semiliquid consumer product as defined in § 1302.3 (b... hazardous product. In addition, any other extremely flammable contact adhesive and similar liquid or... 1302.4 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS...

16 CFR 1401.1 - Scope.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SELF PRESSURIZED... Product Safety Act (15 U.S.C. 2076(e)) for marketers and importers of self-pressurized consumer products... product stating that it contains a chlorofluorocarbon that may harm the public health and environment by...

16 CFR 1401.1 - Scope.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SELF PRESSURIZED... Product Safety Act (15 U.S.C. 2076(e)) for marketers and importers of self-pressurized consumer products... product stating that it contains a chlorofluorocarbon that may harm the public health and environment by...

16 CFR 1401.1 - Scope.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SELF PRESSURIZED... Product Safety Act (15 U.S.C. 2076(e)) for marketers and importers of self-pressurized consumer products... product stating that it contains a chlorofluorocarbon that may harm the public health and environment by...

Endocrine disrupting chemicals in indoor and outdoor air

NASA Astrophysics Data System (ADS)

Rudel, Ruthann A.; Perovich, Laura J.

The past 50 years have seen rapid development of new building materials, furnishings, and consumer products and a corresponding explosion in new chemicals in the built environment. While exposure levels are largely undocumented, they are likely to have increased as a wider variety of chemicals came into use, people began spending more time indoors, and air exchange rates decreased to improve energy efficiency. As a result of weak regulatory requirements for chemical safety testing, only limited toxicity data are available for these chemicals. Over the past 15 years, some chemical classes commonly used in building materials, furnishings, and consumer products have been shown to be endocrine disrupting chemicals - that is they interfere with the action of endogenous hormones. These include PCBs, used in electrical equipment, caulking, paints and surface coatings; chlorinated and brominated flame retardants, used in electronics, furniture, and textiles; pesticides, used to control insects, weeds, and other pests in agriculture, lawn maintenance, and the built environment; phthalates, used in vinyl, plastics, fragrances, and other products; alkylphenols, used in detergents, pesticide formulations, and polystyrene plastics; and parabens, used to preserve products like lotions and sunscreens. This paper summarizes reported indoor and outdoor air concentrations, chemical use and sources, and toxicity data for each of these chemical classes. While industrial and transportation-related pollutants have been shown to migrate indoors from outdoor sources, it is expected that indoor sources predominate for these consumer product chemicals; and some studies have identified indoor sources as the predominant factor influencing outdoor ambient air concentrations in densely populated areas. Mechanisms of action, adverse effects, and dose-response relationships for many of these chemicals are poorly understood and no systematic screening of common chemicals for endocrine disrupting effects is currently underway, so questions remain as to the health impacts of these exposures.

Endocrine disrupting chemicals in indoor and outdoor air

PubMed Central

Rudel, Ruthann A.; Perovich, Laura J.

2009-01-01

The past 50 years have seen rapid development of new building materials, furnishings, and consumer products and a corresponding explosion in new chemicals in the built environment. While exposure levels are largely undocumented, they are likely to have increased as a wider variety of chemicals came into use, people began spending more time indoors, and air exchange rates decreased to improve energy efficiency. As a result of weak regulatory requirements for chemical safety testing, only limited toxicity data are available for these chemicals. Over the past 15 years, some chemical classes commonly used in building materials, furnishings, and consumer products have been shown to be endocrine disrupting chemicals—that is they interfere with the action of endogenous hormones. These include PCBs, used in electrical equipment, caulking, paints and surface coatings; chlorinated and brominated flame retardants, used in electronics, furniture, and textiles; pesticides, used to control insects, weeds, and other pests in agriculture, lawn maintenance, and the built environment; phthalates, used in vinyl, plastics, fragrances, and other products; alkylphenols, used in detergents, pesticide formulations, and polystyrene plastics; and parabens, used to preserve products like lotions and sunscreens. This paper summarizes reported indoor and outdoor air concentrations, chemical use and sources, and toxicity data for each of these chemical classes. While industrial and transportation-related pollutants have been shown to migrate indoors from outdoor sources, it is expected that indoor sources predominate for these consumer product chemicals; and some studies have identified indoor sources as the predominant factor influencing outdoor ambient air concentrations in densely populated areas. Mechanisms of action, adverse effects, and dose-response relationships for many of these chemicals are poorly understood and no systematic screening of common chemicals for endocrine disrupting effects is currently underway, so questions remain as to the health impacts of these exposures. PMID:20047015

Product Related Adult Genitourinary Injuries Treated at Emergency Departments in the United States from 2002 to 2010

PubMed Central

Bagga, Herman S.; Tasian, Gregory E.; Fisher, Patrick B.; McCulloch, Charles E.; McAninch, Jack W.; Breyer, Benjamin N.

2013-01-01

Purpose We describe the epidemiological features of adult genitourinary injuries related to consumer products and determined the patient cohorts, products and situations associated with increased genitourinary injury risk. Materials and Methods The National Electronic Injury Surveillance System, a data set validated to provide a probability sample of injury related emergency department presentations in the United States, was analyzed to characterize genitourinary injuries from 2002 to 2010. We analyzed 3,545 observations to derive national estimates. Results An estimated 142,144 adults (95% CI 115,324–168,964) presented to American emergency departments with genitourinary injuries from 2002 to 2010. Of the injuries 69% occurred in men. A large majority of injuries involved the external genitalia. The most common categories of products involved were sporting items in 30.2% of cases, clothing articles in 9.4% and furniture in 9.2%. The highest prevalence of injury was at ages 18 to 28 years (37.5%), which was most often related to sports equipment, such as bicycles. Older cohorts (age greater than 65 years) more commonly sustained injuries during falls and often in the bathroom during use of a shower or tub. Of all patients 88% were evaluated and treated in the emergency department without inpatient admission, although the admission rate increased with increasing patient age. Conclusions Acute genitourinary injury is often associated with common consumer items and with identifiable high risk cohorts, products and situations. Consumers, practitioners and safety champions can use our epidemiological data to prioritize and develop strategies aimed at the prevention, limitation and informed treatment of such injuries. PMID:23127766

Product related adult genitourinary injuries treated at emergency departments in the United States from 2002 to 2010.

PubMed

Bagga, Herman S; Tasian, Gregory E; Fisher, Patrick B; McCulloch, Charles E; McAninch, Jack W; Breyer, Benjamin N

2013-04-01

We describe the epidemiological features of adult genitourinary injuries related to consumer products and determined the patient cohorts, products and situations associated with increased genitourinary injury risk. The National Electronic Injury Surveillance System, a data set validated to provide a probability sample of injury related emergency department presentations in the United States, was analyzed to characterize genitourinary injuries from 2002 to 2010. We analyzed 3,545 observations to derive national estimates. An estimated 142,144 adults (95% CI 115,324-168,964) presented to American emergency departments with genitourinary injuries from 2002 to 2010. Of the injuries 69% occurred in men. A large majority of injuries involved the external genitalia. The most common categories of products involved were sporting items in 30.2% of cases, clothing articles in 9.4% and furniture in 9.2%. The highest prevalence of injury was at ages 18 to 28 years (37.5%), which was most often related to sports equipment, such as bicycles. Older cohorts (age greater than 65 years) more commonly sustained injuries during falls and often in the bathroom during use of a shower or tub. Of all patients 88% were evaluated and treated in the emergency department without inpatient admission, although the admission rate increased with increasing patient age. Acute genitourinary injury is often associated with common consumer items and with identifiable high risk cohorts, products and situations. Consumers, practitioners and safety champions can use our epidemiological data to prioritize and develop strategies aimed at the prevention, limitation and informed treatment of such injuries. Copyright © 2013 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

Critical product features' identification using an opinion analyzer.

PubMed

Shamim, Azra; Balakrishnan, Vimala; Tahir, Muhammad; Shiraz, Muhammad

2014-01-01

The increasing use and ubiquity of the Internet facilitate dissemination of word-of-mouth through blogs, online forums, newsgroups, and consumer's reviews. Online consumer's reviews present tremendous opportunities and challenges for consumers and marketers. One of the challenges is to develop interactive marketing practices for making connections with target consumers that capitalize consumer-to-consumer communications for generating product adoption. Opinion mining is employed in marketing to help consumers and enterprises in the analysis of online consumers' reviews by highlighting the strengths and weaknesses of the products. This paper describes an opinion mining system based on novel review and feature ranking methods to empower consumers and enterprises for identifying critical product features from enormous consumers' reviews. Consumers and business analysts are the main target group for the proposed system who want to explore consumers' feedback for determining purchase decisions and enterprise strategies. We evaluate the proposed system on real dataset. Results show that integration of review and feature-ranking methods improves the decision making processes significantly.

Critical Product Features' Identification Using an Opinion Analyzer

PubMed Central

Shamim, Azra; Balakrishnan, Vimala

2014-01-01

The increasing use and ubiquity of the Internet facilitate dissemination of word-of-mouth through blogs, online forums, newsgroups, and consumer's reviews. Online consumer's reviews present tremendous opportunities and challenges for consumers and marketers. One of the challenges is to develop interactive marketing practices for making connections with target consumers that capitalize consumer-to-consumer communications for generating product adoption. Opinion mining is employed in marketing to help consumers and enterprises in the analysis of online consumers' reviews by highlighting the strengths and weaknesses of the products. This paper describes an opinion mining system based on novel review and feature ranking methods to empower consumers and enterprises for identifying critical product features from enormous consumers' reviews. Consumers and business analysts are the main target group for the proposed system who want to explore consumers' feedback for determining purchase decisions and enterprise strategies. We evaluate the proposed system on real dataset. Results show that integration of review and feature-ranking methods improves the decision making processes significantly. PMID:25506612

Electronic nicotine delivery systems: a research agenda.

PubMed

Etter, Jean-François; Bullen, Chris; Flouris, Andreas D; Laugesen, Murray; Eissenberg, Thomas

2011-05-01

Electronic nicotine delivery systems (ENDS, also called electronic cigarettes or e-cigarettes) are marketed to deliver nicotine and sometimes other substances by inhalation. Some tobacco smokers report that they used ENDS as a smoking cessation aid. Whether sold as tobacco products or drug delivery devices, these products need to be regulated, and thus far, across countries and states, there has been a wide range of regulatory responses ranging from no regulation to complete bans. The empirical basis for these regulatory decisions is uncertain, and more research on ENDS must be conducted in order to ensure that the decisions of regulators, health care providers and consumers are based on science. However, there is a dearth of scientific research on these products, including safety, abuse liability and efficacy for smoking cessation. The authors, who cover a broad range of scientific expertise, from basic science to public health, suggest research priorities for non-clinical, clinical and public health studies. They conclude that the first priority is to characterize the safety profile of these products, including in long-term users. If these products are demonstrated to be safe, their efficacy as smoking cessation aids should then be tested in appropriately designed trials. Until these studies are conducted, continued marketing constitutes an uncontrolled experiment and the primary outcome measure, poorly assessed, is user health. Potentially, this research effort, contributing to the safety and efficacy of new smoking cessation devices and to the withdrawal of dangerous products, could save many lives.

Electronic nicotine delivery systems: a research agenda

PubMed Central

Etter, Jean-François; Bullen, Chris; Flouris, Andreas D; Laugesen, Murray; Eissenberg, Thomas

2011-01-01

Electronic nicotine delivery systems (ENDS, also called electronic cigarettes or e-cigarettes) are marketed to deliver nicotine and sometimes other substances by inhalation. Some tobacco smokers report that they used ENDS as a smoking cessation aid. Whether sold as tobacco products or drug delivery devices, these products need to be regulated, and thus far, across countries and states, there has been a wide range of regulatory responses ranging from no regulation to complete bans. The empirical basis for these regulatory decisions is uncertain, and more research on ENDS must be conducted in order to ensure that the decisions of regulators, health care providers and consumers are based on science. However, there is a dearth of scientific research on these products, including safety, abuse liability and efficacy for smoking cessation. The authors, who cover a broad range of scientific expertise, from basic science to public health, suggest research priorities for non-clinical, clinical and public health studies. They conclude that the first priority is to characterize the safety profile of these products, including in long-term users. If these products are demonstrated to be safe, their efficacy as smoking cessation aids should then be tested in appropriately designed trials. Until these studies are conducted, continued marketing constitutes an uncontrolled experiment and the primary outcome measure, poorly assessed, is user health. Potentially, this research effort, contributing to the safety and efficacy of new smoking cessation devices and to the withdrawal of dangerous products, could save many lives. PMID:21415064

Economic and Environmental Consequences of Widespread Expansion of Solar energy

NASA Astrophysics Data System (ADS)

Satija, Gaurav

The purpose of the thesis is to examine the sustainability of an expansion in solar energy subject to resource constraints of Indium. Coal and natural gas are taken as competitors for solar in the energy market. The consumer electronics market also competes with solar PV production because of Indium's use in the manufacturing of LCD screens. A partial equilibrium model is made which determines the rate of extraction of indium, coal and natural gas endogenously. Consumer demand is modeled by the use of cost shares. Generation of electricity and production of LCDs are modeled using Constant Elasticity of Substitution functions. Initial production capacity for both electricity and LCD is considered in the model. The model then endogenously determines the level of investment required. Model simulations are performed to predict the extraction paths and production levels for a timeline of 100 years. A sensitivity analysis is performed to see the reaction of the model to changes in consumer demand and learning rates in solar energy. The response of the model to imposition of various emission caps is also shown. Results of the model show that indium scarcity prevents solar from expanding significantly to a level where it can take over from non-renewable sources of energy. Increased research in solar technologies would not be of much help unless more Indium is available, either by recycling of solar PVs and LCDs or searching for alternate technologies to manufacture LCD screes. Emission caps are able to control excessive usage of fossil fuels and preserve them for a longer time.

Development of a Consumer Product Ingredient Database for ...

EPA Pesticide Factsheets

Consumer products are a primary source of chemical exposures, yet little structured information is available on the chemical ingredients of these products and the concentrations at which ingredients are present. To address this data gap, we created a database of chemicals in consumer products using product Material Safety Data Sheets (MSDSs) publicly provided by a large retailer. The resulting database represents 1797 unique chemicals mapped to 8921 consumer products and a hierarchy of 353 consumer product “use categories” within a total of 15 top-level categories. We examine the utility of this database and discuss ways in which it will support (i) exposure screening and prioritization, (ii) generic or framework formulations for several indoor/consumer product exposure modeling initiatives, (iii) candidate chemical selection for monitoring near field exposure from proximal sources, and (iv) as activity tracers or ubiquitous exposure sources using “chemical space” map analyses. Chemicals present at high concentrations and across multiple consumer products and use categories that hold high exposure potential are identified. Our database is publicly available to serve regulators, retailers, manufacturers, and the public for predictive screening of chemicals in new and existing consumer products on the basis of exposure and risk. The National Exposure Research Laboratory’s (NERL’s) Human Exposure and Atmospheric Sciences Division (HEASD) conducts resear

16 CFR § 1000.21 - Office of Compliance and Field Operations.

Code of Federal Regulations, 2013 CFR

2013-01-01

... enforces the Consumer Product Safety Act reporting requirements. It reviews consumer complaints, conducts...§ 1000.21 Section § 1000.21 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL COMMISSION... identifying and addressing safety hazards in consumer products already in distribution, promoting industry...

Diamond Coatings

NASA Technical Reports Server (NTRS)

1990-01-01

Advances in materials technology have demonstrated that it is possible to get the advantages of diamond in a number of applications without the cost penalty, by coating and chemically bonding an inexpensive substrate with a thin film of diamond-like carbon (DLC). Diamond films offer tremendous technical and economic potential in such advances as chemically inert protective coatings; machine tools and parts capable of resisting wear 10 times longer; ball bearings and metal cutting tools; a broad variety of optical instruments and systems; and consumer products. Among the American companies engaged in DLC commercialization is Diamonex, Inc., a diamond coating spinoff of Air Products and Chemicals, Inc. Along with its own proprietary technology for both polycrystalline diamond and DLC coatings, Diamonex is using, under an exclusive license, NASA technology for depositing DLC on a substrate. Diamonex is developing, and offering commercially, under the trade name Diamond Aegis, a line of polycrystalline diamond-coated products that can be custom tailored for optical, electronic and engineering applications. Diamonex's initial focus is on optical products and the first commercial product is expected in late 1990. Other target applications include electronic heat sink substrates, x-ray lithography masks, metal cutting tools and bearings.

To Prescribe or Not to Prescribe? Consumer Access to Life-Enhancing Products

PubMed Central

Marinova, Detelina; Kozlenkova, Irina V; Cuttler, Leona; Silvers, J B

2017-01-01

Abstract With rapid biotechnological advances in specialty drugs and direct-to-consumer advertising, consumers are under tremendous pressure to look, perform, feel, and live better. This is often accomplished through the use of life-enhancing products, sometimes referred to as performance-enhancing products, which can be accessed only through a gatekeeper, such as a physician. Integrating consumer and medical research, this article investigates how physicians make trade-offs between objective medical and nonmedical factors to determine consumers’ access to life-enhancing products by examining US pediatric endocrinologists’ prescription decisions for growth hormone (GH) for healthy but short children. The results of a conjoint study indicate that consumer medical criteria have less impact on a physician’s decision to prescribe GH if the consumer requests a prescription or the physician believes in the intangible product benefits, and more impact when the product is more expensive. A physician’s length of experience increases the impact of consumer medical criteria and decreases the influence of a consumer’s preference for a prescription on the decision to prescribe. Overall, this research shows that not all consumers have equal access to life-enhancing products; their access depends on a complex combination of medical and nonmedical factors related to the consumer, product, and the physician. PMID:29928069

Consumer product chemical weight fractions from ingredient lists

EPA Science Inventory

Assessing human exposures to chemicals in consumer products requires composition information. However, comprehensive composition data for products in commerce are not generally available. Many consumer products have reported ingredient lists that are constructed using specific gu...

78 FR 12354 - Certain Wireless Consumer Electronics Devices and Components Thereof; Commission Determination...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-22

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-853] Certain Wireless Consumer Electronics Devices and Components Thereof; Commission Determination Concerning an Initial Determination Granting a Motion To Amend Complaint and Notice of Investigation AGENCY: U.S. International Trade...

Age and gender differences in the influence of extrinsic product information on acceptability for RTD green tea beverages.

PubMed

Bae, Ye-Won; Lee, Soh Min; Kim, Kwang-Ok

2016-03-15

The introduction of ready-to-drink (RTD) green tea beverage has allowed diverse consumers to consume green teas and related products. Green tea that has been traditionally consumed for its delicate flavor characteristics is also widely consumed for its recognition as a healthy product. Because it is reported that age difference exists in consideration of health-related information, the objective of the study was to investigate how sensory and non-sensory factors, in particular health-related information, price and packaging, would affect the flavor acceptability of green tea beverages, depending on consumers' age and gender. Regardless of the product information, old consumers preferred products that provided an indication of health beneficial effect. On the other hand, young consumers tended to be influenced by extrinsic product information such as packaging, brand/manufacturer and/or price, though these consumers were not so much influenced by health beneficial information as were the old consumers. The findings of the study implied that the influence of non-sensory information such as health beneficial information in flavor liking differed depending mostly on consumers' age, and little on gender, for RTD green tea beverages. © 2015 Society of Chemical Industry.

Fuzzy logic controllers: A knowledge-based system perspective

NASA Technical Reports Server (NTRS)

Bonissone, Piero P.

1993-01-01

Over the last few years we have seen an increasing number of applications of Fuzzy Logic Controllers. These applications range from the development of auto-focus cameras, to the control of subway trains, cranes, automobile subsystems (automatic transmissions), domestic appliances, and various consumer electronic products. In summary, we consider a Fuzzy Logic Controller to be a high level language with its local semantics, interpreter, and compiler, which enables us to quickly synthesize non-linear controllers for dynamic systems.

16 CFR § 1401.1 - Scope.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SELF... Product Safety Act (15 U.S.C. 2076(e)) for marketers and importers of self-pressurized consumer products... product stating that it contains a chlorofluorocarbon that may harm the public health and environment by...

Proton gradient regulation 5 supports linear electron flow to oxidize photosystem I.

PubMed

Takagi, Daisuke; Miyake, Chikahiro

2018-03-31

In higher plants, light drives the linear photosynthetic electron transport reaction from H 2 O to electron sinks, which is called as linear electron flow (LEF). LEF activity should be regulated depending on electron sinks; otherwise excess electrons accumulate in the thylakoid membranes and stimulate reactive oxygen species (ROS) production in photosystem I (PSI), which causes oxidative damage to PSI. To prevent ROS production in PSI, PSI should be oxidized during photosynthesis, and PROTON GRADIENT REGULATION 5 (PGR5) and PGR like 1 (PGRL1) are important to oxidized PSI. PGR5 and PGRL1 are recognized as a component of ferredoxin-dependent cyclic electron flow around PSI (Fd-CEF-PSI), however there is no direct evidence for the significant operation of Fd-CEF-PSI during photosynthesis in wild-type (WT) plants. Thus, electron distribution by PGR5 and PGRL1 between Fd-CEF-PSI and LEF is still elusive. Here, we show direct evidence that Fd-CEF-PSI activity is minor during steady state photosynthesis by measuring the Fd redox state in vivo in Arabidopsis thaliana. We found that Fd oxidation rate is determined by LEF activity during steady state photosynthesis in WT. On the other hand, pgr5 and pgrl1 showed lower electron transport efficiency from PSI to electron sinks through Fd during steady state photosynthesis. These results demonstrate that electrons are exclusively consumed in electron sinks through Fd, and the phenotypes of pgr5 and pgrl1 are likely caused by the disturbance of the LEF between PSI and electron sinks. We suggest that PGR5 and PGRL1 modulate the LEF according to electron sink activities around PSI. This article is protected by copyright. All rights reserved.

Intervention Model for Contaminated Consumer Products: A Multifaceted Tool for Protecting Public Health

PubMed Central

Ahmed, Munerah; Nagin, Deborah; Clark, Nancy

2014-01-01

Lead-based paint and occupational lead hazards remain the primary exposure sources of lead in New York City (NYC) children and men, respectively. Lead poisoning has also been associated with the use of certain consumer products in NYC. The NYC Department of Health and Mental Hygiene developed the Intervention Model for Contaminated Consumer Products, a comprehensive approach to identify and reduce exposure to lead and other hazards in consumer products. The model identifies hazardous consumer products, determines their availability in NYC, enforces on these products, and provides risk communication and public education. Implementation of the model has resulted in removal of thousands of contaminated products from local businesses and continues to raise awareness of these hazardous products. PMID:24922141

Consumer Acceptance of Dry Dog Food Variations

PubMed Central

Donfrancesco, Brizio Di; Koppel, Kadri; Swaney-Stueve, Marianne; Chambers, Edgar

2014-01-01

Simple Summary The objectives of this study were to compare the acceptance of different dry dog food products by consumers, determine consumer clusters for acceptance, and identify the characteristics of dog food that drive consumer acceptance. Pet owners evaluated dry dog food samples available in the US market. The results indicated that appearance of the sample, especially the color, influenced pet owner’s overall liking more than the aroma of the product. Abstract The objectives of this study were to compare the acceptance of different dry dog food products by consumers, determine consumer clusters for acceptance, and identify the characteristics of dog food that drive consumer acceptance. Eight dry dog food samples available in the US market were evaluated by pet owners. In this study, consumers evaluated overall liking, aroma, and appearance liking of the products. Consumers were also asked to predict their purchase intent, their dog’s liking, and cost of the samples. The results indicated that appearance of the sample, especially the color, influenced pet owner’s overall liking more than the aroma of the product. Overall liking clusters were not related to income, age, gender, or education, indicating that general consumer demographics do not appear to play a main role in individual consumer acceptance of dog food products. PMID:26480043

77 FR 10358 - Acceptance of ASTM F963-11 as a Mandatory Consumer Product Safety Standard

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-22

... Safety. Pursuant to section 106 of the Consumer Product Safety Improvement Act of 2008, ASTM F963-11 will... INFORMATION: On February 10, 2009, section 106(a) of the Consumer Product Safety Improvement Act of 2008... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Chapter II Acceptance of ASTM F963-11 as a Mandatory...

On the ability of consumer electronics microphones for environmental noise monitoring.

PubMed

Van Renterghem, Timothy; Thomas, Pieter; Dominguez, Frederico; Dauwe, Samuel; Touhafi, Abdellah; Dhoedt, Bart; Botteldooren, Dick

2011-03-01

The massive production of microphones for consumer electronics, and the shift from dedicated processing hardware to PC-based systems, opens the way to build affordable, extensive noise measurement networks. Applications include e.g. noise limit and urban soundscape monitoring, and validation of calculated noise maps. Microphones are the critical components of such a network. Therefore, in a first step, some basic characteristics of 8 microphones, distributed over a wide range of price classes, were measured in a standardized way in an anechoic chamber. In a next step, a thorough evaluation was made of the ability of these microphones to be used for environmental noise monitoring. This was done during a continuous, half-year lasting outdoor experiment, characterized by a wide variety of meteorological conditions. While some microphones failed during the course of this test, it was shown that it is possible to identify cheap microphones that highly correlate to the reference microphone during the full test period. When the deviations are expressed in total A-weighted (road traffic) noise levels, values of less than 1 dBA are obtained, in excess to the deviation amongst reference microphones themselves.

15 CFR 16.3 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... term consumer product means any article produced or distributed for sale to a consumer for the use... performance characteristic means a performance characteristic of a consumer product that can be measured in an objective manner with respect to a given consumer product. (g) The term Specification means a Performance...

16 CFR 1205.1 - Scope of the standard.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY... subpart A of part 1205 is a consumer product safety standard which prescribes safety requirements for... the standard are subject to the requirements of this standard if they are “consumer products”. “Walk...

16 CFR 1205.1 - Scope of the standard.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY... subpart A of part 1205 is a consumer product safety standard which prescribes safety requirements for... the standard are subject to the requirements of this standard if they are “consumer products”. “Walk...

16 CFR 1205.1 - Scope of the standard.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY... subpart A of part 1205 is a consumer product safety standard which prescribes safety requirements for... the standard are subject to the requirements of this standard if they are “consumer products”. “Walk...

16 CFR 1212.5 - Findings.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR... rule, the Consumer Product Safety Act (CPSA), 15 U.S.C. 2058(f)(1), requires the Commission to consider... the risk of injury the rule is designed to eliminate or reduce; (2) The approximate number of consumer...

78 FR 49480 - Agency Information Collection Activities; Submission for Office of Management and Budget Review...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-14

... behavior among a broad range of consumers with differing needs. Reaching all target audiences requires... CONSUMER PRODUCT SAFETY COMMISSION [Docket No. CPSC-2013-0020] Agency Information Collection... Survey AGENCY: Consumer Product Safety Commission. ACTION: Notice. SUMMARY: The Consumer Product Safety...

16 CFR 1303.1 - Scope and application.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS BAN OF LEAD-CONTAINING PAINT AND CERTAIN CONSUMER PRODUCTS BEARING LEAD-CONTAINING PAINT § 1303.1 Scope and application...-coating materials for consumer use that contain lead or lead compounds and in which the lead content...

Human mitochondrial haplogroup H: the highest VO2max consumer--is it a paradox?

PubMed

Martínez-Redondo, Diana; Marcuello, Ana; Casajús, José A; Ara, Ignacio; Dahmani, Yahya; Montoya, Julio; Ruiz-Pesini, Eduardo; López-Pérez, Manuel J; Díez-Sánchez, Carmen

2010-03-01

Mitochondrial background has been demonstrated to influence maximal oxygen uptake (VO(2max), in mLkg(-1)min(-1)), but this genetic influence can be compensated for by regular exercise. A positive correlation among electron transport chain (ETC) coupling, ATP and reactive oxygen species (ROS) production has been established, and mitochondrial variants have been reported to show differences in their ETC performance. In this study, we examined in detail the VO(2max) differences found among mitochondrial haplogroups. We recruited 81 healthy male Spanish Caucasian individuals and determined their mitochondrial haplogroup. Their VO(2max) was determined using incremental cycling exercise (ICE). VO(2max) was lower in J than in non-J haplogroup individuals (P=0.04). The H haplogroup was responsible for this difference (VO(2max); J vs. H; P=0.008) and this group also had significantly higher mitochondrial oxidative damage (mtOD) than the J haplogroup (P=0.04). In agreement with these results, VO(2max) and mtOD were positively correlated (P=0.01). Given that ROS production is the major contributor to mtOD and consumes four times more oxygen per electron than the ETC, our results strongly suggest that ROS production is responsible for the higher VO(2max) found in the H variant. These findings not only contribute to a better understanding of the mechanisms underneath VO(2max), but also help to explain some reported associations between mitochondrial haplogroups and mtOD with longevity, sperm motility, premature aging and susceptibility to different pathologies.

Mass spectrometry in grape and wine chemistry. Part II: The consumer protection.

PubMed

Flamini, Riccardo; Panighel, Annarita

2006-01-01

Controls in food industry are fundamental to protect the consumer health. For products of high quality, warranty of origin and identity is required and analytical control is very important to prevent frauds. In this article, the "state of art" of mass spectrometry in enological chemistry as a consumer safety contribute is reported. Gas chromatography-mass spectrometry (GC/MS) and liquid-chromatography-mass spectrometry (LC/MS) methods have been developed to determine pesticides, ethyl carbamate, and compounds from the yeast and bacterial metabolism in wine. The presence of pesticides in wine is mainly linked to the use of dicarboxyimide fungicides on vineyard shortly before the harvest to prevent the Botrytis cinerea attack of grape. Pesticide residues are regulated at maximum residue limits in grape of low ppm levels, but significantly lower levels in wine have to be detected, and mass spectrometry offers effective and sensitive methods. Moreover, mass spectrometry represent an advantageous alternative to the radioactive-source-containing electron capture detector commonly used in GC analysis of pesticides. Analysis of ochratoxin A (OTA) in wine by LC/MS and multiple mass spectrometry (MS/MS) permits to confirm the toxin presence without the use of expensive immunoaffinity columns, or time and solvent consuming sample derivatization procedures. Inductively coupled plasma-mass spectrometry (ICP/MS) is used to control heavy metals contamination in wine, and to verify the wine origin and authenticity. Isotopic ratio-mass spectrometry (IRMS) is applied to reveal wine watering and sugar additions, and to determine the product origin and traceability.

16 CFR § 1302.4 - Banned hazardous products.

Code of Federal Regulations, 2013 CFR

2013-01-01

... flammable contact adhesive and similar liquid or semiliquid consumer product as defined in § 1302.3 (b... hazardous product. In addition, any other extremely flammable contact adhesive and similar liquid or... § 1302.4 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT...

16 CFR 1500.89 - Procedures and requirements for determinations regarding lead content of materials or products...

Code of Federal Regulations, 2010 CFR

2010-01-01

... Safety Improvement Act. 1500.89 Section 1500.89 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION... materials or products under section 101(a) of the Consumer Product Safety Improvement Act. (a) The Consumer Product Safety Improvement Act provides for specific lead limits in children's products. Section 101(a) of...

Preliminary research concerning the use of electron accelerators to improve the conservability and to extend the shelf-life of fruits and vegetables

NASA Astrophysics Data System (ADS)

Minea, R.; Oproiu, C.; Pascanu, S.; Matei, C.; Ferdes, O.

1996-06-01

The potential of ionizing radiation treatment for food preservation, shelf-life extension, control of microbial load and reduction of pathogenic microorganism was demonstrated. The irradiations were performed under normal conditions on the Institute of Physics and Technology for Radiation Device's linear electron accelerator, which has the following parameters: 5 μA mean beam current, 6 MeV electron mean energy, pulse period 3.5 μs and dose rates between 100-1500 Gy/min. This research project was aimed at assuring the consumer's acceptance for radiation-treated food and to obtain a significant reduction of food losses. We also propose a promising solution for the radiation processing of some bulk food products at the place of storage, consisting of a mobile electron accelerator. The main characteristics of the mobile electron accelerator are: electron energy 3 to 5 MeV, maximum beam power 5 kW, vertical electron beam; irradiation is possible both with electron beams and with bremsstrahlung. The results of our preliminary research lead to the conclusion that electron-beam irradiation and the use of electron accelerators is a promising solution for food preservation and food safety. Interesting future applications are outlined.

12 CFR 205.7 - Initial disclosures.

Code of Federal Regulations, 2014 CFR

2014-01-01

... TRANSFERS (REGULATION E) § 205.7 Initial disclosures. (a) Timing of disclosures. A financial institution shall make the disclosures required by this section at the time a consumer contracts for an electronic fund transfer service or before the first electronic fund transfer is made involving the consumer's...

12 CFR 205.7 - Initial disclosures.

Code of Federal Regulations, 2010 CFR

2010-01-01

... TRANSFERS (REGULATION E) § 205.7 Initial disclosures. (a) Timing of disclosures. A financial institution shall make the disclosures required by this section at the time a consumer contracts for an electronic fund transfer service or before the first electronic fund transfer is made involving the consumer's...

Detection of counterfeit electronic components through ambient mass spectrometry and chemometrics.

PubMed

Pfeuffer, Kevin P; Caldwell, Jack; Shelley, Jake T; Ray, Steven J; Hieftje, Gary M

2014-09-21

In the last several years, illicit electronic components have been discovered in the inventories of several distributors and even installed in commercial and military products. Illicit or counterfeit electronic components include a broad category of devices that can range from the correct unit with a more recent date code to lower-specification or non-working systems with altered names, manufacturers and date codes. Current methodologies for identification of counterfeit electronics rely on visual microscopy by expert users and, while effective, are very time-consuming. Here, a plasma-based ambient desorption/ionization source, the flowing atmospheric pressure afterglow (FAPA) is used to generate a mass-spectral fingerprint from the surface of a variety of discrete electronic integrated circuits (ICs). Chemometric methods, specifically principal component analysis (PCA) and the bootstrapped error-adjusted single-sample technique (BEAST), are used successfully to differentiate between genuine and counterfeit ICs. In addition, chemical and physical surface-removal techniques are explored and suggest which surface-altering techniques were utilized by counterfeiters.

Social Media and eBusiness: Cultural Impacts on the Influence Process in Consumer Communities

NASA Astrophysics Data System (ADS)

Chen, Yong; Chen, Hong; Xu, Li

2016-08-01

Social media has been used as an important tool by firms to influence consumers’ attitude and behavior. Influence occurs in consumer communities in social media because community members have the control of discovering, producing, sharing, and distributing information and because the spread out of their experiences and opinions in the format of electronic word-of-mouth forms emerging conformance. Prior research has explored how the influence occurring in online social media communities impacts consumers’ attitude and behavior (e.g., product attitude and purchase decision, effectual thinking and behavior, brand trust and brand loyalty). But because social media has the ability of global reach, cross-border factors should not be neglected in studying the influence process. As such, this paper adopts national cultural dimensions identified by Hofstede (1984), individualism/collectivism and power distance particularly, the index of cultural distance, and the social influence theory to explore how culture impacts the influence occurring in consumer communities in social media.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chung, Donald; Elgqvist, Emma; Santhanagopalan, Shriram

Manufacturing capacity for lithium-ion batteries (LIBs) — which power many consumer electronics and are increasingly used to power electric vehicles — is heavily concentrated in East Asia. To illuminate the factors that drive regional competitiveness in automotive LIB cell production, this study models cell manufacturing cost and minimum sustainable price, and examines development of LIB supply chains and current LIB market conditions. The study shows that factors driving the cost competitiveness of LIB manufacturing locations are mostly built—supply chain developments and competition, access to materials, and production expertise. Some regional costs — including cost of capital, labor, and materials —more » are significant and should be considered.« less

75 FR 18165 - Notice of Meeting of Chronic Hazard Advisory Panel on Phthalates

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-09

... to section 108 of the Consumer Product Safety Improvement Act of 2008 (CPSIA) (Pub. L. 110-314... CONSUMER PRODUCT SAFETY COMMISSION Notice of Meeting of Chronic Hazard Advisory Panel on Phthalates AGENCY: Consumer Product Safety Commission. ACTION: Notice of meeting. SUMMARY: The Consumer...

Consumer Acceptance of Dry Dog Food Variations.

PubMed

Di Donfrancesco, Brizio; Koppel, Kadri; Swaney-Stueve, Marianne; Chambers, Edgar

2014-06-16

The objectives of this study were to compare the acceptance of different dry dog food products by consumers, determine consumer clusters for acceptance, and identify the characteristics of dog food that drive consumer acceptance. Eight dry dog food samples available in the US market were evaluated by pet owners. In this study, consumers evaluated overall liking, aroma, and appearance liking of the products. Consumers were also asked to predict their purchase intent, their dog's liking, and cost of the samples. The results indicated that appearance of the sample, especially the color, influenced pet owner's overall liking more than the aroma of the product. Overall liking clusters were not related to income, age, gender, or education, indicating that general consumer demographics do not appear to play a main role in individual consumer acceptance of dog food products.

16 CFR 1102.6 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE (Eff. Jan. 10, 2011) Background and Definitions... Product Safety Information Database. (2) Commission or CPSC means the Consumer Product Safety Commission... Information Database, also referred to as the Database, means the database on the safety of consumer products...

16 CFR 1115.1 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SUBSTANTIAL PRODUCT HAZARD REPORTS General Interpretation § 1115.1 Purpose. The purpose of this part 1115 is to set forth the Consumer Product Safety Commission's (Commission's) interpretation of the reporting requirements imposed on...

Investigating electronic word-of-mouth effects on online discussion forums: the role of perceived positive electronic word-of-mouth review credibility.

PubMed

Chih, Wen-Hai; Wang, Kai-Yu; Hsu, Li-Chun; Huang, Su-Chen

2013-09-01

Electronic word of mouth (eWOM) has been an important factor influencing consumer purchase decisions. Using the ABC model of attitude, this study proposes a model to explain how eWOM affects online discussion forums. Specifically, we propose that platform (Web site reputation and source credibility) and customer (obtaining buying-related information and social orientation through information) factors influence purchase intentions via perceived positive eWOM review credibility, as well as product and Web site attitudes in an online community context. A total of 353 online discussion forum users in an online community (Fashion Guide) in Taiwan were recruited, and structural equation modeling (SEM) was used to test the research hypotheses. The results indicate that Web site reputation, source credibility, obtaining buying-related information, and social orientation through information positively influence perceived positive eWOM review credibility. In turn, perceived positive eWOM review credibility directly influences purchase intentions and also indirectly influences purchase intentions via product and Web site attitudes. Finally, we discuss the theoretical and managerial implications of the findings.

78 FR 42935 - Submission for OMB Review; Comment Request- Follow-Up Activities for Product-Related Injuries

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-18

... CONSUMER PRODUCT SAFETY COMMISSION [Docket No. CPSC-2009-0102] Submission for OMB Review; Comment Request-- Follow-Up Activities for Product-Related Injuries AGENCY: Consumer Product Safety Commission... Consumer Product Safety Commission (Commission or CPSC) announces that it has submitted to the Office of...

Liquid hydrogen production and commercial demand in the United States

NASA Technical Reports Server (NTRS)

Heydorn, Barbara

1990-01-01

Kennedy Space Center, the single largest purchaser of liquid hydrogen (LH2) in the United States, evaluated current and anticipated hydrogen production and consumption in the government and commercial sectors. Specific objectives of the study are as follows: (1) identify LH2 producers in the United States and Canada during 1980-1989 period; (2) compile information in expected changes in LH2 production capabilities over the 1990-2000 period; (3) describe how hydrogen is used in each consuming industry and estimate U.S. LH2 consumption for the chemicals, metals, electronics, fats and oil, and glass industries, and report data on a regional basis; (4) estimate historical and future consumption; and (5) assess the influence of international demands on U.S. plants.

Consumers' acceptance and preferences for nutrition-modified and functional dairy products: A systematic review.

PubMed

Bimbo, Francesco; Bonanno, Alessandro; Nocella, Giuseppe; Viscecchia, Rosaria; Nardone, Gianluca; De Devitiis, Biagia; Carlucci, Domenico

2017-06-01

This systematic literature review collects and summarizes research on consumer acceptance and preferences for nutrition-modified and functional dairy products, to reconcile, and expand upon, the findings of previous studies. We find that female consumers show high acceptance for some functional dairy products, such as yogurt enriched with calcium, fiber and probiotics. Acceptance for functional dairy products increases among consumers with higher diet/health related knowledge, as well as with aging. General interest in health, food-neophobia and perceived self-efficacy seem also to contribute shaping the acceptance for functional dairy products. Furthermore, products with "natural" matches between carriers and ingredients have the highest level of acceptance among consumers. Last, we find that brand familiarity drives consumers with low interest in health to increase their acceptance and preference for health-enhanced dairy products, such as probiotic yogurts, or those with a general function claim. Copyright © 2017 Elsevier Ltd. All rights reserved.

Continuous use of social commerce: Its conceptual relation with E-WOM, commitment and trust

NASA Astrophysics Data System (ADS)

Sami, Atyaf; Hashim, Kamarul Faizal; Yusof, Shafiz Affendi Mohd

2016-08-01

The popularity of social media has changed the way of doing business and introduces a new type of commerce known later as social commerce (s-commerce). Within s-commerce, consumer's loyalty and returning to use have reduced mainly because it is a high competitive environment, which is simply presented by products that proposed and announced rapidly to the market. S-commerce has a magic power called Electronic Word-of-Mouth (E-WOM). E-WOM enables consumers to make a collaboration decision as well as it enable business to reach up their consumers and their network in low cost and short time. Yet, to date, there is limited research that conducted the effect of E-WOM on consumer's continuous use behavior. Therefore, this study is an attempt to propose a value conceptual model that explains the relationship between e-WOM and continuous use behavior. This study serves not only to clarify the relationship between e-WOM and continuous use, but also to explain the mediating role of trust and commitment in this relationship; a theory known as Commitment-Trust theory is adopted. Additionally, drawing upon flow theory, this study examines flow experience determinants as predictors for promoting e-WOM among s-commerce consumers.

78 FR 13857 - Foreign-Trade Zone 93-Raleigh-Durham, NC; Authorization of Production Activity; Revlon Consumer...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-01

... DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B-77-2012] Foreign-Trade Zone 93--Raleigh-Durham, NC; Authorization of Production Activity; Revlon Consumer Products Corporation (Hair Coloring Products); Oxford, NC On October 10, 2012, Revlon Consumer Products Corporation, the operator of FTZ 93G, submitted a notification of proposed production...

75 FR 32161 - Agency Information Collection Activities; Proposed Collection; Comment Request; Consumer Focus...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-07

... staff relies on its expert judgment about consumer behavior, perceptions, and similar information... CONSUMER PRODUCT SAFETY COMMISSION [Docket No. CPSC-2010-0046] Agency Information Collection Activities; Proposed Collection; Comment Request; Consumer Focus Groups AGENCY: Consumer Product Safety...

16 CFR § 1102.2 - Purpose.

Code of Federal Regulations, 2013 CFR

2013-01-01

... AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE Background and Definitions § 1102.2 Purpose. This... establishment and maintenance of a Publicly Available Consumer Product Safety Information Database (also referred to as the “Database”) on the safety of consumer products and other products or substances...

16 CFR 1102.2 - Purpose.

Code of Federal Regulations, 2011 CFR

2011-01-01

... CONSUMER PRODUCT SAFETY INFORMATION DATABASE (Eff. Jan. 10, 2011) Background and Definitions § 1102.2... establishment and maintenance of a Publicly Available Consumer Product Safety Information Database (also referred to as the “Database”) on the safety of consumer products and other products or substances...

16 CFR 1115.3 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SUBSTANTIAL PRODUCT HAZARD REPORTS General Interpretation § 1115.3 Definitions. In addition to the definitions given... Sunshine Act, 16 CFR part 1012. (c) Noncompliance means the failure of a consumer product to comply with an...

16 CFR 1118.20 - Procedures for consent order agreements.

Code of Federal Regulations, 2010 CFR

2010-01-01

.... 1118.20 Section 1118.20 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS INVESTIGATIONS, INSPECTIONS AND INQUIRIES UNDER THE CONSUMER PRODUCT SAFETY ACT... Commission's regulations relating to substantial product hazards (16 CFR part 1115). For all other consent...

Consumer Perception of Retail Pork Bacon Attributes Using Adaptive Choice-based Conjoint Analysis and Maximum Differential Scaling.

PubMed

McLean, K G; Hanson, D J; Jervis, S M; Drake, M A

2017-11-01

Bacon is one of the most recognizable consumer pork products and is differentiated by appearance, flavor, thickness, and several possible product claims. The objective of this study was to explore the attributes of retail bacon that influence consumers to purchase and consume bacon. An Adaptive Choice-Based Conjoint (ACBC) survey was designed for attributes of raw American-style bacon. An ACBC survey (N = 1410 consumers) and Kano questioning were applied to determine the key attributes that influenced consumer purchase. Attributes included package size, brand, thickness, label claims, flavor, price, and images of the bacon package displaying fat:lean ratio. Maximum Difference Scaling (MaxDiff) was used to rank appeal of 20 different bacon images with variable fat:lean ration and slice shape. The most important attribute for bacon purchase was price followed by fat:lean appearance and then flavor. Three consumer clusters were identified with distinct preferences. For 2 clusters, price was not the primary attribute. Understanding preferences of distinct consumer clusters will enable manufacturers to target consumers and make more appealing bacon. Adaptive Choice-Based Conjoint (ACBC) is a research technique that allows consumers to react to assembled products and identify product attributes that they prefer. Kano questions allow researchers to look at the individual aspects of a product and understand consumer sentiment and expectations towards those product qualities while Maximum Difference scaling allows consumers to directly rank single attributes of a product relative to one another. A combination of these 3 approaches can provide key understandings on consumer perception of retail bacon allowing companies to optimize and maximize their development and advertising resources. © 2017 Institute of Food Technologists®.

Helping E-Commerce Consumers Make Good Purchase Decisions: A User Reviews-Based Approach

NASA Astrophysics Data System (ADS)

Zhang, Richong; Tran, Thomas T.

Online product reviews provided by the consumers, who have previously purchased and used some particular products, form a rich source of information for other consumers who would like to study about these products in order to make their purchase decisions. Realizing this great need of consumers, several e-commerce web sites such as Amazon.com offer facilities for consumers to review products and exchange their purchase opinions. Unfortunately, reading through the massive amounts of product reviews available online from many e-communities, forums and newsgroups is not only a tedious task but also an impossible one. Indeed, nowadays consumers need an effective and reliable method to search through those huge sources of information and sort out the most appropriate and helpful product reviews. This paper proposes a model to discover the helpfulness of online product reviews. Product reviews can be analyzed and ranked by our scoring system and those reviews that may help consumers better than others will be found. In addition, we compare our model with a number of machine learning techniques. Our experimental results confirm that our approach is effective in ranking and classifying online product reviews.

48 CFR 552.238-72 - Identification of Products That Have Environmental Attributes.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., and low volatile organic compounds (VOCs). Post-consumer material means a material or finished product... life as a consumer item. Post-consumer material is part of the broader category of “recovered material... and post-consumer material content levels for the specific products designated by EPA (40 CFR part 247...

48 CFR 552.238-72 - Identification of Products That Have Environmental Attributes.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., and low volatile organic compounds (VOCs). Post-consumer material means a material or finished product... life as a consumer item. Post-consumer material is part of the broader category of “recovered material... and post-consumer material content levels for the specific products designated by EPA (40 CFR part 247...

48 CFR 552.238-72 - Identification of Products That Have Environmental Attributes.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., and low volatile organic compounds (VOCs). Post-consumer material means a material or finished product... life as a consumer item. Post-consumer material is part of the broader category of “recovered material... and post-consumer material content levels for the specific products designated by EPA (40 CFR part 247...

48 CFR 552.238-72 - Identification of Products That Have Environmental Attributes.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., and low volatile organic compounds (VOCs). Post-consumer material means a material or finished product... life as a consumer item. Post-consumer material is part of the broader category of “recovered material... and post-consumer material content levels for the specific products designated by EPA (40 CFR part 247...

Ocular Tolerance of Contemporary Electronic Display Devices.

PubMed

Clark, Andrew J; Yang, Paul; Khaderi, Khizer R; Moshfeghi, Andrew A

2018-05-01

Electronic displays have become an integral part of life in the developed world since the revolution of mobile computing a decade ago. With the release of multiple consumer-grade virtual reality (VR) and augmented reality (AR) products in the past 2 years utilizing head-mounted displays (HMDs), as well as the development of low-cost, smartphone-based HMDs, the ability to intimately interact with electronic screens is greater than ever. VR/AR HMDs also place the display at much closer ocular proximity than traditional electronic devices while also isolating the user from the ambient environment to create a "closed" system between the user's eyes and the display. Whether the increased interaction with these devices places the user's retina at higher risk of damage is currently unclear. Herein, the authors review the discovery of photochemical damage of the retina from visible light as well as summarize relevant clinical and preclinical data regarding the influence of modern display devices on retinal health. Multiple preclinical studies have been performed with modern light-emitting diode technology demonstrating damage to the retina at modest exposure levels, particularly from blue-light wavelengths. Unfortunately, high-quality in-human studies are lacking, and the small clinical investigations performed to date have failed to keep pace with the rapid evolutions in display technology. Clinical investigations assessing the effect of HMDs on human retinal function are also yet to be performed. From the available data, modern consumer electronic displays do not appear to pose any acute risk to vision with average use; however, future studies with well-defined clinical outcomes and illuminance metrics are needed to better understand the long-term risks of cumulative exposure to electronic displays in general and with "closed" VR/AR HMDs in particular. [Ophthalmic Surg Lasers Imaging Retina. 2018;49:346-354.]. Copyright 2018, SLACK Incorporated.

Which perceived characteristics make product innovations appealing to the consumer? A study on the acceptance of fruit innovations using cross-cultural consumer segmentation.

PubMed

Onwezen, Marleen C; Bartels, Jos

2011-08-01

In general, fruit consumption in the EU does not meet governments' recommended levels, and innovations in the fruit industry are thought to be useful for increasing fruit consumption. Despite the enormous number of product innovations, the majority of new products in the market fail within the first two years, due to a lack of consumer acceptance. Consumer segmentation may be a useful research tool to increase the success rates of new fruit products. The current study aims to identify consumer segments based on individual importance rankings of fruit choice motives. We conducted a cross-national, online panel survey on fresh fruit innovations in four European countries: the Netherlands (n=251), Greece (n=246), Poland (n=250), and Spain (n=250). Our cluster analysis revealed three homogeneous consumer segments: Average Joe, the Naturally conscious consumer, and the Health-oriented consumer. These consumer segments differed with respect to their importance ratings for fruit choice motives. Furthermore, the willingness to buy specific fruit innovations (i.e., genetically modified, functional food and convenience innovation) and the perceived product characteristics that influence this willingness differed across the segments. Our study could lead to more tailored marketing strategies aimed at increasing consumer acceptance of fruit product innovations based on consumer segmentation. Copyright © 2011 Elsevier Ltd. All rights reserved.

Hazardous waste status of discarded electronic cigarettes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krause, Max J.; Townsend, Timothy G., E-mail: ttown@ufl.edu

Highlights: • Electronic cigarettes were tested using TCLP and WET. • Several electronic cigarette products leached lead at hazardous waste levels. • Lead was the only element that exceeded hazardous waste concentration thresholds. • Nicotine solution may cause hazardous waste classification when discarded unused. - Abstract: The potential for disposable electronic cigarettes (e-cigarettes) to be classified as hazardous waste was investigated. The Toxicity Characteristic Leaching Procedure (TCLP) was performed on 23 disposable e-cigarettes in a preliminary survey of metal leaching. Based on these results, four e-cigarette products were selected for replicate analysis by TCLP and the California Waste Extraction Testmore » (WET). Lead was measured in leachate as high as 50 mg/L by WET and 40 mg/L by TCLP. Regulatory thresholds were exceeded by two of 15 products tested in total. Therefore, some e-cigarettes would be toxicity characteristic (TC) hazardous waste but a majority would not. When disposed in the unused form, e-cigarettes containing nicotine juice would be commercial chemical products (CCP) and would, in the United States (US), be considered a listed hazardous waste (P075). While household waste is exempt from hazardous waste regulation, there are many instances in which such waste would be subject to regulation. Manufactures and retailers with unused or expired e-cigarettes or nicotine juice solution would be required to manage these as hazardous waste upon disposal. Current regulations and policies regarding the availability of nicotine-containing e-cigarettes worldwide were reviewed. Despite their small size, disposable e-cigarettes are consumed and discarded much more quickly than typical electronics, which may become a growing concern for waste managers.« less

16 CFR 1500.91 - Determinations regarding lead content for certain materials or products under section 101 of the...

Code of Federal Regulations, 2010 CFR

2010-01-01

... certain materials or products under section 101 of the Consumer Product Safety Improvement Act. 1500.91 Section 1500.91 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT... Safety Improvement Act. (a) The Consumer Product Safety Improvement Act provides for specific lead limits...

Exposure-Relevant Consumer Product Usage Information Derived from Longitudinal Purchasing Data

EPA Science Inventory

Consumer products that are used in and around the home are a dominant source for anthropogenic chemical exposure. Prediction of the population distribution of chemical exposures encountered due to the residential use of consumer products (such as personal care products, cleaning ...

16 CFR 1102.2 - Purpose.

Code of Federal Regulations, 2014 CFR

2014-01-01

... CONSUMER PRODUCT SAFETY INFORMATION DATABASE Background and Definitions § 1102.2 Purpose. This part sets... maintenance of a Publicly Available Consumer Product Safety Information Database (also referred to as the “Database”) on the safety of consumer products and other products or substances regulated by the Commission. ...

16 CFR 1102.2 - Purpose.

Code of Federal Regulations, 2012 CFR

2012-01-01

... CONSUMER PRODUCT SAFETY INFORMATION DATABASE Background and Definitions § 1102.2 Purpose. This part sets... maintenance of a Publicly Available Consumer Product Safety Information Database (also referred to as the “Database”) on the safety of consumer products and other products or substances regulated by the Commission. ...

Insights on Alterations to the Rumen Ecosystem by Nitrate and Nitrocompounds

PubMed Central

Latham, Elizabeth A.; Anderson, Robin C.; Pinchak, William E.; Nisbet, David J.

2016-01-01

Nitrate and certain short chain nitrocompounds and nitro-oxy compounds are being investigated as dietary supplements to reduce economic and environmental costs associated with ruminal methane emissions. Thermodynamically, nitrate is a preferred electron acceptor in the rumen that consumes electrons at the expense of methanogenesis during dissimilatory reduction to an intermediate, nitrite, which is primarily reduced to ammonia although small quantities of nitrous oxide may also be produced. Short chain nitrocompounds act as direct inhibitors of methanogenic bacteria although certain of these compounds may also consume electrons at the expense of methanogenesis and are effective inhibitors of important foodborne pathogens. Microbial and nutritional consequences of incorporating nitrate into ruminant diets typically results in increased acetate production. Unlike most other methane-inhibiting supplements, nitrate decreases or has no effect on propionate production. The type of nitrate salt added influences rates of nitrate reduction, rates of nitrite accumulation and efficacy of methane reduction, with sodium and potassium salts being more potent than calcium nitrate salts. Digestive consequences of adding nitrocompounds to ruminant diets are more variable and may in some cases increase propionate production. Concerns about the toxicity of nitrate's intermediate product, nitrite, to ruminants necessitate management, as animal poisoning may occur via methemoglobinemia. Certain of the naturally occurring nitrocompounds, such as 3-nitro-1-propionate or 3-nitro-1-propanol also cause poisoning but via inhibition of succinate dehydrogenase. Typical risk management procedures to avoid nitrite toxicity involve gradually adapting the animals to higher concentrations of nitrate and nitrite, which could possibly be used with the nitrocompounds as well. A number of organisms responsible for nitrate metabolism in the rumen have been characterized. To date a single rumen bacterium is identified as contributing appreciably to nitrocompound metabolism. Appropriate doses of the nitrocompounds and nitrate, singly or in combination with probiotic bacteria selected for nitrite and nitrocompound detoxification activity promise to alleviate risks of toxicity. Further studies are needed to more clearly define benefits and risk of these technologies to make them saleable for livestock producers. PMID:26973609

Buying higher welfare poultry products? Profiling Flemish consumers who do and do not.

PubMed

Vanhonacker, F; Verbeke, W

2009-12-01

A substantial number of studies has already investigated differences within the consumer market with regard to attitudes and perceptions in relation to farm animal welfare. Likewise, several studies focused on the gap that exists between positive attitudes and reported consumption or purchase intentions for sustainable food products in general and higher welfare products more specific, and on the factors influencing this attitude-behavior gap. Little or no studies, however, have started from reported pro-welfare behavior to distinguish between consumer groups and to explore the motivations of the respective behavior. With this study, we aim to group consumers according to their reported buying frequency of higher welfare eggs and higher welfare chicken meat. Similarities and dissimilarities between these groups are mapped in terms of individual characteristics, product attribute importance, perceived consumer effectiveness, perception of higher welfare products, and attitude toward a welfare label. The research methodology applied was a quantitative study with cross-sectional consumer survey data collected in Flanders in spring 2007 (n = 469). Pro-welfare behavior was unevenly distributed across different consumer segments, despite a general interest and concern for bird welfare. A consistent choice for standard (no welfare premium) poultry products was related to strong perceived price and availability barriers, to a low importance attached to ethical issues as product attributes, and to a low perceived consumer effectiveness. A consistent choice for products with higher welfare standards to the contrast associated with a high importance attached to ethical issues; a low effect of price and availability perception; a strong association of higher welfare products with product attributes like health, taste, and quality; and a high perceived consumer effectiveness. The identification of market segments with common characteristics is essential for positioning higher welfare products and developing effective communication strategies. Finally, a welfare label emerged as an appropriate communication vehicle for consumers who engage in pro-welfare behavior and who experienced the label as a solution to lower the search costs for higher welfare products.

12 CFR 205.15 - Electronic fund transfer of government benefits.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) Account balance. The means by which the consumer may obtain information concerning the account balance... history or other account information, under paragraph (c) of this section, in which the error is first... consumer for use in initiating an electronic fund transfer of government benefits from an account, other...

Cholesteric Liquid Crystal Based Reflex Color Reflective Displays

NASA Astrophysics Data System (ADS)

Khan, Asad

2012-02-01

Bistable color cholesteric liquid crystal displays are unique LCDs that exhibit high reflectivity, good contrast, extremely low power operation, and are amenable to versatile roll-to-roll manufacturing. The display technology, now branded as Reflex has been in commercialized products since 1996. It has been the subject of extensive research and development globally by a variety of parties in both academic and industrial settings. Today, the display technology is in volume production for applications such as dedicated eWriters (Boogie Board), full color electronic skins (eSkin), and displays for smart cards. The flexibility comes from polymerization induced phase separation using unique materials unparalleled in any other display technology. The blend of monomers, polymers, cross linkers, and other components along with nematic liquid crystals and chiral dopants is created and processed in such ways so as to enable highly efficient manufactrable displays using ultra thin plastic substrates -- often as thin as 50μm. Other significant aspects include full color by stacking or spatial separation, night vision capability, ultra high resolution, as well as active matrix capabilities. Of particular note is the stacking approach of Reflex based displays to show full color. This approach for reflective color displays is unique to this technology. Owing to high transparency in wavelength bands outside the selective reflection band, three primarily color layers can be stacked on top of each other and reflect without interfering with other layers. This highly surprising architecture enables the highest reflectivity of any other reflective electronic color display technology. The optics, architecture, electro-topics, and process techniques will be discussed. This presentation will focus on the physics of the core technology and color, it's evolution from rigid glass based displays to flexible displays, development of products from the paradigm shifting concepts to consumer products and related markets. This is a development that spans a wide space of highly technical development and fundamental science to products and commercialization to enable the entry of the technology into consumer markets.

How important is local food to organic-minded consumers?

PubMed

Hempel, Corinna; Hamm, Ulrich

2016-01-01

The study deals with German consumers' attitudes towards organic food and local food, their food purchase behaviour and their personal characteristics. The purpose is to investigate the differences in attitudes and willingness-to-pay values between consumers who consider the organic production of food (very) important and those who consider it less important. This study combines a consumer survey with an in-store, discrete choice experiment. In the analysis, findings from the consumer survey were related to the choices made by consumers in the experiment. Consumers' preferences and willingness-to-pay values were estimated through random parameter logit modelling. Organic-minded consumers (i.e. those who regarded organic food production as (very) important in the survey) have stronger preferences and estimated willingness-to-pay values for organic as well as local products. Locally produced food, as opposed to food from neighbouring countries or non-EU countries, is preferred over organically produced food by both consumer groups which demonstrates that organic-minded consumers do not only consider organic food production as important, but also value local food production in a purchase situation. Hence, it can be assumed that local food production complements organic food production for the group of organic-minded consumers. This contribution is the first study dealing with local and organic food purchase behaviour in Germany that examines four different products and is carried out in rural as well as urban locations in four different regions. Due to the application of a choice experiment including no-choice options and binding purchase decisions, the results are expected to be closer to real purchase situations than results of direct questioning and choice experiments in online applications. Copyright © 2015 Elsevier Ltd. All rights reserved.

Leveraging Publicly-Available Consumer Product and Chemical Data in Support of Exposure Modeling

EPA Science Inventory

Near-field contact with chemicals in consumer products has been identified as a significant source of human exposure. To predict such exposures, information about chemical occurrence in consumer products is required, but is often not available. The Chemicals and Products Database...

16 CFR 1115.6 - Reporting of unreasonable risk of serious injury or death.

Code of Federal Regulations, 2010 CFR

2010-01-01

... injury or death. 1115.6 Section 1115.6 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SUBSTANTIAL PRODUCT HAZARD REPORTS General Interpretation § 1115.6..., distributor, and retailer of a consumer product distributed in commerce who obtains information which...

16 CFR 1115.2 - Scope and finding.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SUBSTANTIAL PRODUCT HAZARD REPORTS General Interpretation § 1115.2 Scope and finding. (a) Section 15(a) of the CPSA... applicable consumer product safety rule, which failure creates a substantial risk of injury to the public, or...

Dietary habits of Serbian preschool and schoolchildren with regard to food of animal origin

NASA Astrophysics Data System (ADS)

Đorđević, V.; Šarčević, D.; Glišić, M.

2017-09-01

The goal of this study was to explore attitudes and habits of Serbian preschool and school children in consumption of meat products, milk and milk products, eggs and egg products and honey and bee products. The survey was conducted on a sample of 227 children, divided into three different age groups: preschool (ages 4-6), primary school I-IV grade (ages 7-11) and primary school V-VIII grade (ages 12-15). The results showed that all examined groups of children consumed meat products, milk and milk products, eggs and egg products, and honey and bee products. In all groups of children, the most frequently consumed food (among our food category choices) was dried ham (consumed by 19.64% of preschool children; 23.75% of schoolchildren from I-IV grade; 19.74% of schoolchildren from V-VIII grade). Fewer preschool children consumed sterilized milk compared to children of school age. The results showed that in all three groups of children, the most commonly consumed milk products were yoghurt (from 12.20 to 15.29% of children consumed these) and sour cream (from 11.57 to 12.74% of children consumed this), while kefir was the least-consumed product. In addition, there was no difference in consumption of boiled or fried eggs in the examined groups of children, while the consumption of egg products (mayonnaise) was higher in the group of preschool children than in the group of schoolchildren from V-VIII grade. Preschool children consumed honey 14.99% more often than schoolchildren from I-IV grade, and 14.49% more often than did schoolchildren from grade V-VIII.

Marketing Animal-Friendly Products: Addressing the Consumer Social Dilemma with Reinforcement Positioning Strategies

PubMed Central

Ingenbleek, Paul T.M.; van Trijp, Hans C.M.; van der Veen, Gerrita

2017-01-01

Simple Summary Modern production systems aimed at improving animal welfare are more costly than traditional systems. Animal-friendly products are therefore typically more expensive than mainstream products, which presents one of the main barriers to consumer animal-friendly product choice. To overcome this barrier, marketing strategies that associate animal welfare with different types of value, such as taste, healthiness or good feeling, may be useful. This article presents a theoretical framework with marketing strategies using various types of value, suitable for animal-friendly products to encourage consumers to buy animal-friendly instead of mainstream products. We also explain why some consumers, such as those with a rational or an intuitive thinking style, may be more sensitive to some strategies over others, giving directions to marketing managers on how to approach different types of consumers. Because the credibility of animal welfare claims is a critical issue in marketing animal-friendly products, we address this issue as well. Specifically, we propose that, to gain consumer trust, companies selling animal-friendly products need to take into account the impact of their overall strategy on the effectiveness of marketing strategies for individual products and that they may need to collaborate with relevant stakeholders, such as media or animal-interest organizations. Abstract This article presents a conceptual framework that aims to encourage consumer animal-friendly product choice by introducing positioning strategies for animal-friendly products. These strategies reinforce the animal welfare with different types of consumption values and can therefore reduce consumers’ social dilemma, which is a major barrier to animal-friendly consumer choices. The article suggests how animal-friendly products can use various types of consumption values (functional, sensory, emotional, social, epistemic and situational) to create an attractive position relative to their competitors. It also explains why some consumer segments, such as those with a specific thinking style, may experience a stronger effect of some strategies, giving directions on how to approach different types of consumers. Finally, building on research asserting that animal welfare is a credence product attribute, the article proposes moderating effects of two factors that help consumers to evaluate the credibility of animal welfare claims, namely corporate social responsibility strategy and the role of stakeholders. Here it concludes that companies selling animal-friendly products need to be aware of the impact of their overall strategy on the effectiveness of positioning strategies for individual products and that, to gain consumer trust, they may need to collaborate with relevant stakeholders, such as media or animal-interest organizations. PMID:29240686

Product Safety: "An Ounce of Prevention". Health and the Consumer.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Elementary and Secondary Education.

Secondary level students learn about product safety in this consumer education learning activity package, which is one of a series. While the majority of products are safe, there remains a small percentage of consumer goods which reach the market place containing a real or potential hazard to the consumer's safety. This module is designed to make…

16 CFR 700.11 - Written warranty, service contract, and insurance distinguished for purposes of compliance under...

Code of Federal Regulations, 2010 CFR

2010-01-01

... the consumer product and the consumer must not give any consideration beyond the purchase price of the consumer product in order to benefit from the agreement. It is not a requirement of the Act that an... agreements which may provide similar coverage of consumer products, the written warranty, and the service...

78 FR 65629 - Energy Conservation Program for Consumer Products: Decision and Order Granting a Waiver to...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-01

... representative of consumer behavior. For example, if the number of annual cycles results in greater than a 3-day... Conservation Program for Consumer Products: Decision and Order Granting a Waiver to Whirlpool Corporation From... Conservation Program for Consumer Products Other Than Automobiles, a program covering most major household...

Validation of an aggregate exposure model for substances in consumer products: a case study of diethyl phthalate in personal care products

PubMed Central

Delmaar, Christiaan; Bokkers, Bas; ter Burg, Wouter; Schuur, Gerlienke

2015-01-01

As personal care products (PCPs) are used in close contact with a person, they are a major source of consumer exposure to chemical substances contained in these products. The estimation of realistic consumer exposure to substances in PCPs is currently hampered by the lack of appropriate data and methods. To estimate aggregate exposure of consumers to substances contained in PCPs, a person-oriented consumer exposure model has been developed (the Probabilistic Aggregate Consumer Exposure Model, PACEM). The model simulates daily exposure in a population based on product use data collected from a survey among the Dutch population. The model is validated by comparing diethyl phthalate (DEP) dose estimates to dose estimates based on biomonitoring data. It was found that the model's estimates compared well with the estimates based on biomonitoring data. This suggests that the person-oriented PACEM model is a practical tool for assessing realistic aggregate exposures to substances in PCPs. In the future, PACEM will be extended with use pattern data on other product groups. This will allow for assessing aggregate exposure to substances in consumer products across different product groups. PMID:25352161

A statistical study on consumer's perception of sustainable products

NASA Astrophysics Data System (ADS)

Pater, Liana; Izvercian, Monica; Ivaşcu, Larisa

2017-07-01

Sustainability and sustainable concepts are quite often but not always used correctly. The statistical research on consumer's perception of sustainable products has tried to identify the level of knowledge regarding the concept of sustainability and sustainable products, the selected criteria concerning the buying decision, the intention of purchasing a sustainable product, main sustainable products preferred by consumers.

Economic and environmental benefits of reducing standby power lossin DVD/VCD players and copiers in China

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lin, Jiang; Li, Tienan; Li, Aizhen

With the popularization of household electrical appliances and the rapid development of office automation and networking, a huge number of consumer electronic devices, computers, copiers, and fax machines have been put into use in China over the last two decades. These products almost all use a certain amount of standby power--the power that is consumed when a device is connected but not performing its primary function. The rapid growth of standby energy consumption due to these products--and the consequent environmental problems--has attracted more and more attentions from researchers and from many government and international agencies. Numerous countries have developed policiesmore » and measures to restrict and reduce standby energy consumption (US EPA, 2004, IEA, 2001, and GEEA, 2004). However, standby energy consumption is still a new concept for Chinese consumers and the phenomenon of ''unconscious waste of energy'' is still very common in the people's daily life and work. With the goal of reducing China's standby energy consumption, China Certification Center for Energy Conservation Products (CECP) and the Lawrence Berkeley National Laboratory (LBNL) have, under the sponsorship of the Energy Foundation (EF), entered into a collaboration to develop technical requirements for CECP's labeling program for consumer electronics and office equipment. These technical requirements will be used to qualify products for CECP's energy efficiency endorsement label in China. In the phase I of this collaborative project, CECP and LBNL conducted technical and economic research on televisions and printers in China. Based on the results of this research, CECP developed specifications for, and carried out corresponding energy conservation certifications for these two products. CECP's standby power certification program has made impressive gains in China. Leading manufacturers, such as Haier, Hesons, TCL, Chuangwei, Lenovo, EPSON, Fujitsu, and Brother have participated in CECP's certification activities. Media events organized by CECP have greatly improved the country's awareness of standby power loss. Reducing standby power loss has been formally incorporated into China's energy efficiency policy portfolio and in China's collaboration with the international community on the subject of energy efficiency (IEA, 2001). In phase II of the program, CECP's main task was to assess the market for DVD/VCD (Digital Versatile/Video Disc and Video Compact Disc) players and copiers to analyze the economic and technical benefits of energy conservation potential, and to develop technical specifications for DVD/VCD players and copiers, with technical assistance from LBNL. Having built on the success of Phase I, CECP paid great attention to the appraisal of market conditions and the economic and environmental benefits of reducing standby power loss in DVD/VCD players and copiers, and solicited inputs from stakeholders before finalizing the product certification requirements. This paper summarizes the expected energy conservation and environmental benefits due to the implementation of certification programs for DVD/VCD players and copiers in China.« less

76 FR 38059 - Defining Larger Participants in Certain Consumer Financial Products and Services Markets

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-29

... and Services Markets AGENCY: Bureau of Consumer Financial Protection. ACTION: Notice and Request for... other markets for consumer financial products or services, the supervision program generally will apply... consumers and to the consumer financial markets.\\5\\ In implementing this supervision program, the CFPB may...

Consumer awareness and interest toward sodium reduction trends in Korea.

PubMed

Kim, Mina K; Lee, Kwang-Geun

2014-07-01

Reduction of dietary sodium intake by lowering amount of sodium in foods is a global industry target. Quantitative information on current consumer knowledge of sodium reduction trends in Korea is unknown. The objective of this study was to quantify the consumer knowledge and awareness of sodium and salt reduction in foods and to characterize consumer interest in health labeling on the food package. Additionally, comparison of consumer knowledge status between Korea and United States was followed. Consumers (n = 289) participated in an internet survey designed to gauge consumer knowledge and attitudes toward dietary sodium, the sodium content in representative food products (n = 27), and their interest toward specific health claims, including sodium labeling. Questions regarding demographics as well as consumption characteristics were asked. Sodium knowledge index and saltiness belief index were calculated based on the number of correct responses regarding the salt level and sodium content in given food products. Kano analysis was conducted to determine the role of nutrition labels in consumer satisfaction with products. Current consumer knowledge on the sodium content in food products was high, and consumers were adept at matching the sodium content with the salty taste intensity of food products. Consumers' knowledge of the relationship between diets high in sodium and an increased risk of developing previously reported sodium-related diseases, such as hypertension, coronary heart disease, kidney disease, and stomach cancer, were also high. Information on the nutrition panel that influences the consumer satisfaction (trans-fat, sodium, ingredient list, and country of origin) as well as adjective-nutrition claim pairs that appeal positively to purchase intent of the product were identified. This work provided the current status of Korean consumer knowledge on the amount of sodium in food and that sodium can be a risk factor of developing chronic diseases. It also provided practical information to food marketers on what consumers like and what they want to see on product labels in Korea. © 2014 Institute of Food Technologists®

16 CFR § 1205.1 - Scope of the standard.

Code of Federal Regulations, 2013 CFR

2013-01-01

... household or residence, a school, in recreation, or otherwise.” The term does not include products that are...§ 1205.1 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS...) General. This subpart A of part 1205 is a consumer product safety standard which prescribes safety...

Consumer Health: Products and Services.

ERIC Educational Resources Information Center

Haag, Jessie Helen

This book presents a general overview of consumer health, its products and services. Consumer health is defined as those topics dealing with a wise selection of health products and services, agencies concerned with the control of these products and services, evaluation of quackery and health misconceptions, health careers, and health insurance.…

16 CFR 1304.3 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS BAN OF... definitions in section 3 of the Consumer Product Safety Act (15 U.S.C. 2052) apply to this part 1304. (b... that which is not bound, or otherwise “locked-in” to a product by resins or other bonding agents, or...

Agribusiness Group Paper

DTIC Science & Technology

2002-11-21

services, markets, and consumers. A Consumer-Driven Market Increasingly, consumers define the food market. Changes in consumer preferences have resulted...ownership and production becomes more concentrated to better meet consumer preferences and the demand for food. 8 CHALLENGES While the United States is...vie for market share. In order to obtain competitive advantage, agribusinesses must focus on price and value- added products that meet consumer

Design of agricultural product quality safety retrospective supervision system of Jiangsu province

NASA Astrophysics Data System (ADS)

Wang, Kun

2017-08-01

In store and supermarkets to consumers can trace back agricultural products through the electronic province card to query their origin, planting, processing, packaging, testing and other important information and found that the problems. Quality and safety issues can identify the responsibility of the problem. This paper designs a retroactive supervision system for the quality and safety of agricultural products in Jiangsu Province. Based on the analysis of agricultural production and business process, the goal of Jiangsu agricultural product quality safety traceability system construction is established, and the specific functional requirements and non-functioning requirements of the retroactive system are analyzed, and the target is specified for the specific construction of the retroactive system. The design of the quality and safety traceability system in Jiangsu province contains the design of the overall design, the trace code design and the system function module.

Suspect Screening of Chemicals in Consumer Products

EPA Science Inventory

This presentation details a pilot suspect screening analysis (SSA) of common consumer products done under the Rapid Exposure and Dosimetry project of CSS. This work presents methods which can rapidly characterize chemicals identified in consumer products including formulations (s...

Marketing Animal-Friendly Products: Addressing the Consumer Social Dilemma with Reinforcement Positioning Strategies.

PubMed

van Riemsdijk, Lenka; Ingenbleek, Paul T M; van Trijp, Hans C M; van der Veen, Gerrita

2017-12-14

This article presents a conceptual framework that aims to encourage consumer animal-friendly product choice by introducing positioning strategies for animal-friendly products. These strategies reinforce the animal welfare with different types of consumption values and can therefore reduce consumers' social dilemma, which is a major barrier to animal-friendly consumer choices. The article suggests how animal-friendly products can use various types of consumption values (functional, sensory, emotional, social, epistemic and situational) to create an attractive position relative to their competitors. It also explains why some consumer segments, such as those with a specific thinking style, may experience a stronger effect of some strategies, giving directions on how to approach different types of consumers. Finally, building on research asserting that animal welfare is a credence product attribute, the article proposes moderating effects of two factors that help consumers to evaluate the credibility of animal welfare claims, namely corporate social responsibility strategy and the role of stakeholders. Here it concludes that companies selling animal-friendly products need to be aware of the impact of their overall strategy on the effectiveness of positioning strategies for individual products and that, to gain consumer trust, they may need to collaborate with relevant stakeholders, such as media or animal-interest organizations.

12 CFR 205.17 - Requirements for overdraft services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... consumer agrees, electronically, which includes a statement informing the consumer of the right to revoke... explanation of the consumer's right to affirmatively consent to the financial institution's payment of... that the consumer has the right to opt into, or opt out of, the payment of overdrafts under the...

Correlation of in vitro challenge testing with consumer use testing for cosmetic products.

PubMed Central

Brannan, D K; Dille, J C; Kaufman, D J

1987-01-01

An in vitro microbial challenge test has been developed to predict the likelihood of consumer contamination of cosmetic products. The challenge test involved inoculating product at four concentrations (30, 50, 70, and 100%) with microorganisms known to contaminate cosmetics. Elimination of these microorganisms at each concentration was followed over a 28-day period. The test was used to classify products as poorly preserved, marginally preserved, or well preserved. Consumer use testing was then used to determine whether the test predicted the risk of actual consumer contamination. Products classified by the challenge test as poorly preserved returned 46 to 90% contaminated after use. Products classified by the challenge test as well preserved returned with no contamination. Marginally preserved products returned with 0 to 21% of the used units contaminated. As a result, the challenge test described can be accurately used to predict the risk of consumer contamination of cosmetic products. PMID:3662517

European citizen and consumer attitudes and preferences regarding beef and pork.

PubMed

Verbeke, Wim; Pérez-Cueto, Federico J A; Barcellos, Marcia D de; Krystallis, Athanasios; Grunert, Klaus G

2010-02-01

This paper presents the combined mid-term findings of the consumer research components of two EU Sixth Framework Programme integrated projects concerning meat, ProSafeBeef and Q-PorkChains. The consumer pillar of ProSafeBeef carried out eight focus group discussions in May 2008, in France, Germany, Spain and the UK. Q-PorkChains conducted a large-scale, web-based, consumer survey in January 2008 in Belgium, Denmark, Germany, Greece and Poland. The first project provides a set of qualitative data from a small cohort of focus groups and the second a set of quantitative data from a larger consumer sample. This paper draws together the main findings of both projects and provides a comprehensive overview of European citizens' and consumers' attitudes towards and preferences regarding beef and pork. In general, consumers consider meat to be a healthy and important component of the diet. Consumers support the development of technologies that can improve the health attributes of meat products and guarantee eating quality, but they have a negative view of what they see to be excessive manipulation and lack of naturalness in the production and processing of beef products. In the Q-PorkChains study consumer and citizen segments are identified and profiled. Consumer segments were built upon the frequency and variety of pork consumption. The citizen segments were built upon their attitudes towards pig production systems. Overall, the relationship between individuals' views as citizens and their behaviour as consumers was found to be quite weak and did not appear to greatly or systematically influence meat-buying habits. Future studies in both projects will concentrate on consumers' acceptance of innovative meat product concepts and products, with the aim of boosting consumer trust and invigorating the European beef and pork industries.

Interested consumers' awareness of harmful chemicals in everyday products.

PubMed

Hartmann, Sabrina; Klaschka, Ursula

2017-01-01

Everyday products can contain a multitude of harmful substances unnoticed by most consumers, because established risk communication channels reach only part of the society. The question is, whether at least interested and informed consumers are able to use risk communication tools and assess harmful chemicals in products. An online survey investigated the awareness of 1030 consumers on harmful substances in everyday items. Participating consumers' education level, knowledge in chemistry, and motivation were above society's average. Although a large number of responses showed that survey participants were familiar with several aspects of the issue, the results revealed that knowledge in chemistry helped, but was not enough. Many participants assumed that products with an eco-label, natural personal care products, products without hazard pictograms or products produced in the European Union would not contain harmful substances. Most participants indicated to use hazard pictograms, information on the packaging, reports in the media, and environmental and consumer organizations as information sources, while information by authorities and manufacturers were not named frequently and did not receive high confidence. Smartphone applications were not indicated by many participants as information sources. The information sources most trusted were environmental and consumer organizations, hazard pictograms, and lists of ingredients on the containers. The declared confidence in certain risk communication instruments did not always correspond to the use frequencies indicated. Nearly all participants considered legislators as responsible for the reduction of harmful substances in consumer products. Misconceptions about harmful substances in products can be dangerous for the personal health and the environment. The survey indicates that motivation, educational level, and chemical expertise do not automatically provide an appropriate understanding of harmful substances in products. If well-informed consumers are not sufficiently capable to use risk information elements as revealed in this study, then this will be even more the case for the general public. Consumer awareness should be stipulated by an improved information strategy about chemical risks in consumer products with an extensive participation of the target groups and by more efforts by authorities and manufactures to build trust and to provide easily understandable information.

76 FR 22103 - The Consumer and Governmental Affairs Bureau Seeks Comment on “Need for Speed” Information for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-20

... to make informed choices among competing broadband Internet access services. According to the most... speed and performance required for the range of Internet applications consumers intend to use, and how... electronically using the Internet by accessing the Commission's Electronic Comment Filing System (ECFS): http...

American Gadgets: Cybernetics, Consumer Electronics, and Twentieth-Century US Fiction

ERIC Educational Resources Information Center

Simeone, Michael

2011-01-01

Challenging the argument that liberal humanism faces extinction in the face of ubiquitous digital technologies, my dissertation analyzes the ways in which consumer electronics reinscribe the human subject as a privileged category in the information age. Through spaces like the Matrix, Windows 7, or even the single row of play controls on a…

Perceptions of chronically ill and healthy consumers about electronic personal health records: a comparative empirical investigation.

PubMed

Cocosila, Mihail; Archer, Norm

2014-07-23

To develop a model of consumer perceptions of electronic personal health records (PHRs) and validate it in a comparative study between consumers who report having a chronic illness and those who report being well. A model of PHR use motivators and barriers was built and tested through a national survey across Canada. Data were collected from 800 individuals, 18 years or older. Half reported having a chronic illness or disability and half reported being well. Analyses were performed with structural equation modelling techniques. A total of 389 answers from chronically ill and 383 from well participants were collected. Perceived usefulness was the key explanation of the intention to use PHRs for both ill and well people (total effect of 0.601 and 0.565, respectively) followed by security, privacy and trust in PHRs (total effect of 0.377 and 0.479, respectively). Conversely, computer anxiety was perceived as a significant barrier (total effect of -0.327 for ill individuals and -0.212 for well individuals). The model proposed was appropriate in explaining key consumer positive and negative perceptions on electronic PHR use. We found little difference in perceptions of electronic PHRs between chronically ill and well individuals, although self-reporting their health status might have influenced the results. To increase the adoption rate of electronic PHRs among both chronically ill and well consumers it is necessary to reinforce consumer perceptions of the usefulness of and trust in these eHealth technologies while mitigating their anxieties about computer use in general. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

29 CFR 1983.101 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) PROCEDURES FOR THE HANDLING OF RETALIATION COMPLAINTS UNDER SECTION 219 OF THE CONSUMER PRODUCT SAFETY... other than Saturdays, Sundays, and Federal holidays. (c) Commission means the Consumer Product Safety... filed. (e) (1) Consumer product means any article, or component part thereof, produced or distributed...

29 CFR 1983.101 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) PROCEDURES FOR THE HANDLING OF RETALIATION COMPLAINTS UNDER SECTION 219 OF THE CONSUMER PRODUCT SAFETY... other than Saturdays, Sundays, and Federal holidays. (c) Commission means the Consumer Product Safety... filed. (e) (1) Consumer product means any article, or component part thereof, produced or distributed...

16 CFR 1000.29 - Directorate for Engineering Sciences.

Code of Federal Regulations, 2010 CFR

2010-01-01

... standards, product safety tests and test methods, performance criteria, design specifications, and quality control standards for consumer products, based on engineering and scientific methods. It conducts... consumer interest groups. The Directorate conducts human factors studies and research of consumer product...

16 CFR 1000.29 - Directorate for Engineering Sciences.

Code of Federal Regulations, 2012 CFR

2012-01-01

... standards, product safety tests and test methods, performance criteria, design specifications, and quality control standards for consumer products, based on engineering and scientific methods. It conducts... consumer interest groups. The Directorate conducts human factors studies and research of consumer product...

16 CFR 1025.18 - Class actions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL RULES OF PRACTICE FOR ADJUDICATIVE..., regulation, or consumer product safety rule, or (3) Manufacturers, distributors, or retailers, or a... consumer product safety rule. When appropriate, a class may be divided into subclasses and each subclass...

16 CFR § 1025.18 - Class actions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL RULES OF PRACTICE FOR ADJUDICATIVE..., regulation, or consumer product safety rule, or (3) Manufacturers, distributors, or retailers, or a... consumer product safety rule. When appropriate, a class may be divided into subclasses and each subclass...

16 CFR 1025.18 - Class actions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL RULES OF PRACTICE FOR ADJUDICATIVE..., regulation, or consumer product safety rule, or (3) Manufacturers, distributors, or retailers, or a... consumer product safety rule. When appropriate, a class may be divided into subclasses and each subclass...

Environmental Assessment of Packaging: The Consumer Point of View

PubMed

Van Dam YK

1996-09-01

When marketing environmentally responsible packaged products, the producer is confronted with consumer beliefs concerning the environmental friendliness of packaging materials. When making environmentally conscious packaging decisions, these consumer beliefs should be taken into account alongside the technical guidelines. Dutch consumer perceptions of the environmental friendliness of packaged products are reported and compared with the results of a life-cycle analysis assessment. It is shown that consumers judge environmental friendliness mainly from material and returnability. Furthermore, the consumer perception of the environmental friendliness of packaging material is based on the postconsumption waste, whereas the environmental effects of production are ignored. From the consumer beliefs concerning environmental friendliness implications are deduced for packaging policy and for environmental policy.KEY WORDS: Consumer behavior; Environment; Food; Packaging; Perception; Waste

7 CFR 70.52 - Prerequisites to packaging ready-to-cook poultry or rabbits identified with consumer grademarks.

Code of Federal Regulations, 2011 CFR

2011-01-01

... rabbits identified with consumer grademarks. 70.52 Section 70.52 Agriculture Regulations of the Department... RABBIT PRODUCTS Grading of Poultry Products and Rabbit Products Identifying and Marking Products § 70.52 Prerequisites to packaging ready-to-cook poultry or rabbits identified with consumer grademarks. The official...

76 FR 6765 - Consumer Product Safety Act: Notice of Commission Action on the Stay of Enforcement of Testing...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-08

... Stay of Enforcement of Testing and Certification Requirements AGENCY: Consumer Product Safety... enforcement of certain testing and certification provisions of section 14 of the Consumer Product Safety Act..., standard, or regulation. For nonchildren's products, the certification must be based on a test of each...

Consumer appeal of nutrition and health claims in three existing product concepts.

PubMed

Verbeke, Wim; Scholderer, Joachim; Lähteenmäki, Liisa

2009-06-01

This paper reports on consumers' reactions towards calcium-enriched fruit juice, omega-3 enriched spread and fibre-enriched cereals, each with a nutrition claim, health claim and reduction of disease risk claim. Cross-sectional data were collected in April 2006 from a sample of 341 consumers in Belgium. Consumers' reactions to the carrier product, functional ingredient and claim combinations were assessed as perceived convincingness of the claim, credibility of the product, attractiveness of the product, and intention to buy the product, while accounting for differences in product familiarity, attitudinal and demographic characteristics. Generally, health claims outperformed nutrition claims, and both of these claim types outperformed reduction of disease risk claims. Comparing consumer reactions across product concepts revealed clear preferences for fibre-enriched cereals as compared to the other two concepts. The interaction effects between claim type and product concept indicated that reduction of disease risk claims are perceived very well in omega-3 enriched spreads, particularly in terms of perceived convincingness of the claim, while not appealing to consumers in the other product concepts. Positive attitudes towards functional foods and familiarity with the concrete functional product category boosted the claim type and product ratings, whereas perceived control over own health and perceiving functional foods as a marketing scam decreased all product concept's appeal.

Expert Panels, Consumers, and Chemistry.

ERIC Educational Resources Information Center

Rehfeldt, Thomas K.

2000-01-01

Studied the attributes, properties, and consumer acceptance of antiperspirant products through responses of 400 consumers (consumer data), expert panel data, and analytical data about the products. Results show how the Rasch model can provide the tool necessary to combine data from several sources. (SLD)

The Effects of Consumer Education on Consumer Search.

ERIC Educational Resources Information Center

Fast, Janet; And Others

1989-01-01

A study investigated the relationship between selected consumer and marketplace characteristics and consumers' prepurchase allocation of search time among information sources (product test reports; dealer sales representatives; advertisements; family and friends). The household production model proved useful; written educational materials appeared…

Diode Lasers used in Plastic Welding and Selective Laser Soldering - Applications and Products

NASA Astrophysics Data System (ADS)

Reinl, S.

Aside from conventional welding methods, laser welding of plastics has established itself as a proven bonding method. The component-conserving and clean process offers numerous advantages and enables welding of sensitive assemblies in automotive, electronic, medical, human care, food packaging and consumer electronics markets. Diode lasers are established since years within plastic welding applications. Also, soft soldering using laser radiation is becoming more and more significant in the field of direct diode laser applications. Fast power controllability combined with a contactless temperature measurement to minimize thermal damage make the diode laser an ideal tool for this application. These advantages come in to full effect when soldering of increasingly small parts in temperature sensitive environments is necessary.

Functional and taxonomic dynamics of an electricity-consuming methane-producing microbial community.

PubMed

Bretschger, Orianna; Carpenter, Kayla; Phan, Tony; Suzuki, Shino; Ishii, Shun'ichi; Grossi-Soyster, Elysse; Flynn, Michael; Hogan, John

2015-11-01

The functional and taxonomic microbial dynamics of duplicate electricity-consuming methanogenic communities were observed over a 6 months period to characterize the reproducibility, stability and recovery of electromethanogenic consortia. The highest rate of methanogenesis was 0.72 mg-CH4/L/day, which occurred during the third month of enrichment when multiple methanogenic phylotypes and associated Desulfovibrionaceae phylotypes were present in the electrode-associated microbial community. Results also suggest that electromethanogenic microbial communities are very sensitive to electron donor-limiting open-circuit conditions. A 45 min exposure to open-circuit conditions induced an 87% drop in volumetric methane production rates. Methanogenic performance recovered after 4 months to a maximum value of 0.30 mg-CH4/L/day under set potential operation (-700 mV vs Ag/AgCl); however, current consumption and biomass production was variable over time. Long-term functional and taxonomic analyses from experimental replicates provide new knowledge toward understanding how to enrich electromethanogenic communities and operate bioelectrochemical systems for stable and reproducible performance. Copyright © 2015 Elsevier Ltd. All rights reserved.

Challenges and opportunities of biodegradable plastics: A mini review.

PubMed

Rujnić-Sokele, Maja; Pilipović, Ana

2017-02-01

The concept of materials coming from nature with environmental advantages of being biodegradable and/or biobased (often referred to as bioplastics) is very attractive to the industry and to the consumers. Bioplastics already play an important role in the fields of packaging, agriculture, gastronomy, consumer electronics and automotive, but still they have a very low share in the total production of plastics (currently about 1% of the about 300 million tonnes of plastic produced annually). Biodegradable plastics are often perceived as the possible solution for the waste problem, but biodegradability is just an additional feature of the material to be exploited at the end of its life in specific terms, in the specific disposal environment and in a specific time, which is often forgotten. They should be used as a favoured choice for the applications that demand a cheap way to dispose of the item after it has fulfilled its job (e.g. for food packaging, agriculture or medical products). The mini-review presents the opportunities and future challenges of biodegradable plastics, regarding processing, properties and waste management options.

77 FR 58983 - Notice of Telephonic Prehearing Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-25

... CONSUMER PRODUCT SAFETY COMMISSION [CPSC Docket No. 12-1] Notice of Telephonic Prehearing Conference AGENCY: U.S. Consumer Product Safety Commission. ACTION: Notice. SUMMARY: Notice of telephonic... standards, regulations, and consumer product safety rules; (11) Disclosure of the names of witnesses and of...

16 CFR 1105.2 - Factors.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Factors. 1105.2 Section 1105.2 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CONTRIBUTIONS TO COSTS OF PARTICIPANTS IN DEVELOPMENT OF CONSUMER PRODUCT SAFETY STANDARDS § 1105.2 Factors. The Commission...

16 CFR 1213.7 - Findings.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR ENTRAPMENT HAZARDS IN BUNK BEDS § 1213.7 Findings. The Consumer Product Safety Act requires that the... there will be substantial compliance with such voluntary standard. (d) The benefits expected from the...

16 CFR 1204.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY... addition to the definitions given in section 3 of the Consumer Product Safety Act (15 U.S.C. 2052), the..., ground plane elements, matching networks, element-connecting hardware, mounting hardware, feed cable, and...

16 CFR 1101.61 - Generally.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS INFORMATION DISCLOSURE UNDER SECTION 6(b) OF THE CONSUMER PRODUCT SAFETY ACT Information Submitted Pursuant to Section 15... initial report to assist the Commission in its evaluation of the section 15 report. However, the...

16 CFR 1406.2 - Background.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Background. 1406.2 Section 1406.2 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS COAL AND WOOD BURNING... Consumer Product Safety Commission disclose a number of incidents involving coal and wood burning...

16 CFR 1406.2 - Background.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Background. 1406.2 Section 1406.2 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS COAL AND WOOD BURNING... Consumer Product Safety Commission disclose a number of incidents involving coal and wood burning...

16 CFR 1406.2 - Background.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Background. 1406.2 Section 1406.2 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS COAL AND WOOD BURNING... Consumer Product Safety Commission disclose a number of incidents involving coal and wood burning...

16 CFR 1406.2 - Background.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Background. 1406.2 Section 1406.2 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS COAL AND WOOD BURNING... Consumer Product Safety Commission disclose a number of incidents involving coal and wood burning...

75 FR 15993 - Civil Penalty Factors

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-31

... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Part 1119 Civil Penalty Factors AGENCY: Consumer Product... final rule providing its interpretation of the civil penalty factors found in the Consumer Product... consider certain factors in determining the amount of any civil penalty to seek. The Commission published...

Using electronic data interchange to report product quality

NASA Astrophysics Data System (ADS)

Egan, Donald F.; Frank, Donald T.

1993-03-01

The Product Quality Deficiency Report (PQDR) is a Department of Defense form that identifies deficiencies in the manufacture, repair, or procurement of materiel. It may be used by DoD employees or contractors to identify defects at any point in the item's life. DoD generates nearly 75,000 such deficiency reports each year. In most cases, when a defect is identified, Standard Form (SF) 368 is completed and sent to the activity managing the contract under which the materiel was procured. That activity, usually in conjunction with the contractor, investigates the complaint, attempts to determine a cause and a corrective action, and must make some disposition of the defective materiel. The process is labor- and paper-intensive and time-consuming. Technology can reduce the costs of the process and at the same time improve timeliness by electronically exchanging discrepancy data between activities. Electronic data interchange (EDI) is one technology for electronically passing PQDR data. It is widely used in industry and increasingly within DoD. DMRD 941 defines DoD's commitment to use EDI and cites the PQDR and other discrepancy reports as early candidates for EDI. In this report, we describe how EDI can be linked to changes in PQDR processing practices to provide further improvements.

Cross-cultural acceptance of a traditional yoghurt-like product made from fermented cereal.

PubMed

Akissoé, Noël H; Sacca, Carole; Declemy, Anne-Laure; Bechoff, Aurelie; Anihouvi, Victor B; Dalodé, Générose; Pallet, Dominique; Fliedel, Géneviève; Mestres, Christian; Hounhouigan, Joseph D; Tomlins, Keith I

2015-07-01

Akpan is a traditional ready-to-drink fermented yoghurt-like cereal beverage consumed in urban and rural areas in Benin. With the aim of adapting the product to new local and export markets, this work maps African and European consumer preferences for different types of Akpan. A sensory profile of Akpan was created and consumer tests were conducted with 103 consumers of African origin and 74 consumers of European origin. Consumer acceptance was significantly correlated with fermented odour (r = -0.94) and milky taste (r = 0.92-0.97) attributes. Cluster analysis revealed different behaviour by African and European consumers with respect to acceptability of Akpan; European consumers did not like the sour taste and African consumers liked an intense sweet milky taste. This study provides information on how Akpan, and other fermented yoghurt-type cereal products, could be adapted to African and European consumer preferences. © 2014 Society of Chemical Industry.

[The system of control over the use of dyes in the manufacture of food products in Russia. The order of selecting objects of research].

PubMed

Bessonov, V V

2010-01-01

This review is carried out information in order to assess food dyes, used in the manufacture of food products in Russia. Based on electronic registries, an analysis of the major sources of dyes in food. The author carried out a frequency analysis of various types of dyes. Based on the research, concluded that the relevance of studying the content of carotenoids in the consumer basket of Russia population, as well as create recommendations for the principles of food fortification in the substance. The author identified the most relevant factors control the safe use of food dyes in the study of food.

Towards a service bus for distributed manufacturing

NASA Astrophysics Data System (ADS)

Delgado-Gomes, Vasco; Oliveira-Lima, José A.; Martins, João F.; Jardim-Gonçalves, Ricardo

2013-10-01

The electronic exchange of data between industrial equipment, manufacturing and information systems of companies is becoming increasingly important with the current trend of reducing products' life cycle, wide range of diversified products, and the need to answer the specific needs of each consumer. In this context, quality, time, costs involved in integrating information over the company's internal processes, and in the interaction of these processes with their customers, suppliers and other business partners are in many sectors, far beyond what the current technology and communications solutions enable. This paper presents a communication infrastructure to integrate several companies from different sectors of the supply chain, to exchange their heterogeneous information using a data model which is composed by different standards.

The effect of gender, age and product type on the origin induced food product experience among young consumers in Finland.

PubMed

Kumpulainen, Tommi; Vainio, Annukka; Sandell, Mari; Hopia, Anu

2018-04-01

Locally produced and sourced food products are gaining popularity among consumers. The effect of the expectations induced by the origin of the food was studied with 1491 consumers in two separate studies among different age groups. In order to test the consumer response to the product origin neutral, domestic, and local conditions were used. Consumers evaluated the product's pleasantness, their probability to choose it, the overall quality, and their willingness to pay. To gather information on whether the phenomenon was consistent, independent from the product category, three different types of products were tested (meat, bread, and vegetables). Our results show that a closer origin does not necessarily produce a positive response, but that there are several moderating factors such as gender, age, and product type. Female university students responded equally to domestic and local origins in the case of bread, but for meat products, only those of local origin induced a positive reaction. In this study population, the male respondents only reacted to a local origin in the case of bread, while domestic meat products provided similar results to local origins. Among young men consumers in the 7th-9th grades responded to the local origin of vegetables positively, while others among the youngest consumers, the origin did not induce a significant effect. The results indicate that even when the product is not appealing itself, locality can still increase the perceived quality. Copyright © 2017 Elsevier Ltd. All rights reserved.

Spray printing of organic semiconducting single crystals

NASA Astrophysics Data System (ADS)

Rigas, Grigorios-Panagiotis; Payne, Marcia M.; Anthony, John E.; Horton, Peter N.; Castro, Fernando A.; Shkunov, Maxim

2016-11-01

Single-crystal semiconductors have been at the forefront of scientific interest for more than 70 years, serving as the backbone of electronic devices. Inorganic single crystals are typically grown from a melt using time-consuming and energy-intensive processes. Organic semiconductor single crystals, however, can be grown using solution-based methods at room temperature in air, opening up the possibility of large-scale production of inexpensive electronics targeting applications ranging from field-effect transistors and light-emitting diodes to medical X-ray detectors. Here we demonstrate a low-cost, scalable spray-printing process to fabricate high-quality organic single crystals, based on various semiconducting small molecules on virtually any substrate by combining the advantages of antisolvent crystallization and solution shearing. The crystals' size, shape and orientation are controlled by the sheer force generated by the spray droplets' impact onto the antisolvent's surface. This method demonstrates the feasibility of a spray-on single-crystal organic electronics.

Elimination of hydrogenase active site assembly blocks H2 production and increases ethanol yield in Clostridium thermocellum

DOE PAGES

Biswas, Ranjita; Zheng, Tianyong; Olson, Daniel G.; ...

2015-02-12

The native ability of Clostridium thermocellum to rapidly consume cellulose and produce ethanol makes it a leading candidate for a consolidated bioprocessing (CBP) biofuel production strategy. C. thermocellum also synthesizes lactate, formate, acetate, H2, and amino acids that compete with ethanol production for carbon and electrons. Elimination of H2 production could redirect carbon flux towards ethanol production by making more electrons available for acetyl-CoA reduction to ethanol. C. thermocellum encodes four hydrogenases and rather than delete each individually, we targeted a hydrogenase maturase gene (hydG), involved in converting the three [FeFe] hydrogenase apoenzymes into holoenzymes. Further deletion of the [NiFe]more » hydrogenase (ech) resulted in a mutant that functionally lacks all four hydrogenases. H2 production in hydG ech was undetectable and ethanol yield increased nearly 2-fold compared to wild type. Interestingly, mutant growth improved upon the addition of acetate, which led to increased expression of genes related to sulfate metabolism, suggesting these mutants may use sulfate as a terminal electron acceptor to balance redox reactions. Genomic analysis of hydG revealed a mutation in adhE, resulting in a strain with both NADH- and NADPH-dependent alcohol dehydrogenase activities. While this same adhE mutation is found in ethanol tolerant C. thermocellum strain E50C, hydG and hydG ech are not more ethanol tolerant than wild type, illustrating the complicated interactions between redox balancing and ethanol tolerance in C. thermocellum. The dramatic increase in ethanol production here suggests that targeting protein post-translational modification is a promising new approach for inactivation of multiple enzymes simultaneously for metabolic engineering.« less

77 FR 55833 - Announcement of Public Meeting on the Consumer Confidence Report (CCR) Rule Retrospective Review...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-11

... on the Consumer Confidence Report (CCR) Rule Retrospective Review and Request for Public Comment on... potential approaches for providing Consumer Confidence Reports (CCR) via electronic delivery. EPA plans to... meeting to give EPA time to process your request. Background Consumer Confidence Reports are a key part of...

The role of usability in the evaluation of accidents: human error or design flaw?

PubMed

Correia, Walter; Soares, Marcelo; Barros, Marina; Campos, Fábio

2012-01-01

This article aims to highlight the role of consumer products companies in the heart and the extent of accidents involving these types of products, and as such undesired events take part as an agent in influencing decision making for the purchase of a product that nature on the part of consumers and users. The article demonstrates, by reference, interviews and case studies such as the development of poorly designed products and design errors of design can influence the usage behavior of users, thus leading to accidents, and also negatively affect the next image of a company. The full explanation of these types of questions aims to raise awareness, plan on a reliable usability, users and consumers in general about the safe use of consumer products, and also safeguard their rights before a legal system of consumer protection, even far away by the CDC--Code of Consumer Protection.

. Cheminformatic exploration of the chemical landscape of consumer products

EPA Science Inventory

Although Consumer products are a primary source of chemical exposures, little information is available on the chemical ingredients of these products and the concentrations at which they are present. To address this data gap, we have created a database of chemicals in consumer pro...

29 CFR 1983.101 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) PROCEDURES FOR THE HANDLING OF RETALIATION COMPLAINTS UNDER SECTION 219 OF THE CONSUMER PRODUCT SAFETY... Consumer Product Safety Commission. (d) Complainant means the employee who filed a CPSIA complaint or on whose behalf a complaint was filed. (e)(1) Consumer product means any article, or component part thereof...

29 CFR 1983.101 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) PROCEDURES FOR THE HANDLING OF RETALIATION COMPLAINTS UNDER SECTION 219 OF THE CONSUMER PRODUCT SAFETY... Consumer Product Safety Commission. (d) Complainant means the employee who filed a CPSIA complaint or on whose behalf a complaint was filed. (e)(1) Consumer product means any article, or component part thereof...

78 FR 2258 - Notice of Telephonic Prehearing Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-10

... CONSUMER PRODUCT SAFETY COMMISSION [CPSC Docket No. 13-1] Notice of Telephonic Prehearing Conference AGENCY: U.S. Consumer Product Safety Commission. ACTION: Notice. SUMMARY: Notice of telephonic..., regulations, and consumer product safety rules; (11) Disclosure of the names of witnesses and of documents or...

Evaluation of Consumer Product Co-occurrence to Inform Chemical Exposure

EPA Science Inventory

Consumer products are an important target of chemical innovation. Used daily for personal hygiene, home care, disinfection and cleaning, consumer products provide a host of benefits, and also an efficient delivery vehicle for a variety of chemicals into our homes and bodies. Al...

16 CFR 1101.61 - Generally.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS INFORMATION DISCLOSURE UNDER SECTION 6(b) OF THE CONSUMER PRODUCT SAFETY ACT Information Submitted Pursuant to Section 15...) if: (1) The Commission has issued a complaint under section 15 (c) or (d) of the CPSA alleging that...

16 CFR 1101.61 - Generally.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS INFORMATION DISCLOSURE UNDER SECTION 6(b) OF THE CONSUMER PRODUCT SAFETY ACT Information Submitted Pursuant to Section 15...) if: (1) The Commission has issued a complaint under section 15 (c) or (d) of the CPSA alleging that...

16 CFR 1101.61 - Generally.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS INFORMATION DISCLOSURE UNDER SECTION 6(b) OF THE CONSUMER PRODUCT SAFETY ACT Information Submitted Pursuant to Section 15...) if: (1) The Commission has issued a complaint under section 15 (c) or (d) of the CPSA alleging that...

16 CFR 1101.24 - Scope of comments Commission seeks.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Section 1101.24 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS INFORMATION DISCLOSURE UNDER SECTION 6(b) OF THE CONSUMER PRODUCT SAFETY ACT Procedure for... its evaluation of the accuracy of the information. A firm's submission, therefore, must be specific...

16 CFR 1209.33 - Reasonable testing program.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 1209.33 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS INTERIM SAFETY STANDARD FOR CELLULOSE INSULATION Certification § 1209.33 Reasonable testing program. (a) General. Section 14(a) of the Consumer Product Safety Act (15 U.S.C. 2063(a)) requires each manufacturer...

77 FR 37836 - Petition Requesting Commission Action Regarding Crib Bumpers

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-25

... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Chapter II [Docket No. CPSC-2012-0034] Petition Requesting Commission Action Regarding Crib Bumpers AGENCY: U.S. Consumer Product Safety Commission. ACTION: Petition for rulemaking. SUMMARY: The U.S. Consumer Product Safety Commission (``Commission'') has received...

76 FR 19926 - Portable Bed Rails: Withdrawal of Advance Notice of Proposed Rulemaking

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-11

... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Part 1500 Portable Bed Rails: Withdrawal of Advance Notice of Proposed Rulemaking AGENCY: Consumer Product Safety Commission. ACTION: Withdrawal of advance notice of proposed rulemaking. SUMMARY: The U.S. Consumer Product Safety Commission (``Commission...

Risk management measures for chemicals in consumer products: documentation, assessment, and communication across the supply chain.

PubMed

Bruinen de Bruin, Yuri; Hakkinen, Pertti Bert; Lahaniatis, Majlinda; Papameletiou, Demosthenes; Del Pozo, Carlos; Reina, Vittorio; Van Engelen, Jacqueline; Heinemeyer, Gerhard; Viso, Anne Catherine; Rodriguez, Carlos; Jantunen, Matti

2007-12-01

This paper analyzes the way risk management measures (RMMs) for consumer products have been used to date in authority and industry risk assessments. A working concept for consumer product RMMs is developed, aimed at controlling, limiting or avoiding exposures, and helping to insure the safe use (or handling) of a substance as part of a consumer product. Particular focus is placed on new requirements introduced by REACH (registration, evaluation, and authorization of chemicals). A RMMs categorization approach is also developed, dividing consumer product RMMs into those that are product integrated and those that are communicated to consumers. For each of these categories, RMMs for normal use, accidental use or misuse need to be distinguished. The level of detail for documenting, assessing and communicating RMMs across supply chains can vary, depending on the type of the assessment (tiered approach). Information on RMMs was collected from published sources to demonstrate that a taxonomical approach using standard descriptors for RMMs libraries is needed for effective information exchange across supply chains.

Identification of Drivers of Liking for Bar-Type Snacks Based on Individual Consumer Preference.

PubMed

Kim, Mina K; Greve, Patrick; Lee, Youngseung

2016-01-01

Understanding consumer hedonic responses on food products are of greatest interests in global food industry. A global partial least square regression (GPLSR) had been well accepted method for understanding consumer preferences. Recently, individual partial least square regression (IPLSR) was accepted as an alternative method of predicting consumer preferences on given food product, because it utilizes the individual differences on product acceptability. To improve the understanding of what constitutes bar-type snack preference, the relationship between sensory attributes and consumer overall liking for 12 bar-type snacks was determined. Sensory attributes that drive consumer product likings were analyzed using averaged-consumer data by GPLSR. To facilitate the interpretation of individual consumer liking, a dummy matrix for the significant weighted regression coefficients of each consumer derived from IPLSR was created. From the application of GPLSR and IPLSR, current study revealed that chocolate and cereal-flavored bars were preferred over fruit-flavored bars. Attributes connected to chocolate flavor positively influenced consumer overall likings on the global and individual consumer levels. Textural attributes affected liking only on the individual level. To fully capture the importance of sensory attributes on consumer preference, the use of GPLSR in conjunction with IPLSR is recommended. © 2015 Institute of Food Technologists®

17 CFR 248.125 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2014 CFR

2014-04-01

... electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing..., such as by calling a single toll-free telephone number. (2) Opt out methods that are not reasonable and...

17 CFR 248.125 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2013 CFR

2013-04-01

... electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing..., such as by calling a single toll-free telephone number. (2) Opt out methods that are not reasonable and...