How consumers evaluate eWOM (electronic word-of-mouth) messages.

PubMed

Doh, Sun-Jae; Hwang, Jang-Sun

2009-04-01

This experiment explored how consumers evaluate electronic word-of-mouth (eWOM) messages about products. Each participant was exposed a 10-message set in a single board. Five groups were manipulated in terms of their ratios of positive and negative messages. The result showed significant differences across various sets of eWOM messages. Although more positive sets showed higher scores in many cases, this was not true in all situations, especially for the case of credibility. Involvement and prior knowledge partially moderated the relationship between the ratio of messages and the eWOM effect. The credibility of Web sites and eWOM messages can be damaged in the long run if all of the eWOM messages are positive.

77 FR 51572 - Certain Wireless Consumer Electronics Devices and Components Thereof; Institution of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-24

... Electronics Devices and Components Thereof; Institution of Investigation Pursuant to 19 U.S.C. 1337 AGENCY: U... importation of certain wireless consumer electronics devices and components thereof by reason of infringement... wireless consumer electronics devices and components thereof that infringe one or more of claims 1, 6, 7, 9...

77 FR 21584 - Certain Consumer Electronics and Display Devices and Products Containing Same; Institution of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-10

... INTERNATIONAL TRADE COMMISSION [Inv. No. 337-TA-836] Certain Consumer Electronics and Display... electronics and display devices and products containing same by reason of infringement of certain claims of U... importation, or the sale within the United States after importation of certain consumer electronics and...

47 CFR 76.630 - Compatibility with consumer electronics equipment.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false Compatibility with consumer electronics equipment. 76.630 Section 76.630 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST... Compatibility with consumer electronics equipment. (a) Cable system operators shall not scramble or otherwise...

47 CFR 76.630 - Compatibility with consumer electronics equipment.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 4 2011-10-01 2011-10-01 false Compatibility with consumer electronics equipment. 76.630 Section 76.630 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST... Compatibility with consumer electronics equipment. (a) Cable system operators shall not scramble or otherwise...

47 CFR 76.630 - Compatibility with consumer electronics equipment.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 4 2014-10-01 2014-10-01 false Compatibility with consumer electronics equipment. 76.630 Section 76.630 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST... Compatibility with consumer electronics equipment. (a) Cable system operators shall not scramble or otherwise...

47 CFR 76.630 - Compatibility with consumer electronics equipment.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 4 2013-10-01 2013-10-01 false Compatibility with consumer electronics equipment. 76.630 Section 76.630 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST... Compatibility with consumer electronics equipment. (a) Cable system operators shall not scramble or otherwise...

47 CFR 76.630 - Compatibility with consumer electronics equipment.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 4 2012-10-01 2012-10-01 false Compatibility with consumer electronics equipment. 76.630 Section 76.630 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST... Compatibility with consumer electronics equipment. (a) Cable system operators shall not scramble or otherwise...

Electricity-driven metabolic shift through direct electron uptake by electroactive heterotroph Clostridium pasteurianum

PubMed Central

Choi, Okkyoung; Kim, Taeyeon; Woo, Han Min; Um, Youngsoon

2014-01-01

Although microbes directly accepting electrons from a cathode have been applied for CO2 reduction to produce multicarbon-compounds, a high electron demand and low product concentration are critical limitations. Alternatively, the utilization of electrons as a co-reducing power during fermentation has been attempted, but there must be exogenous mediators due to the lack of an electroactive heterotroph. Here, we show that Clostridium pasteurianum DSM 525 simultaneously utilizes both cathode and substrate as electron donors through direct electron transfer. In a cathode compartment poised at +0.045 V vs. SHE, a metabolic shift in C. pasteurianum occurs toward NADH-consuming metabolite production such as butanol from glucose (20% shift in terms of NADH consumption) and 1,3-propandiol from glycerol (21% shift in terms of NADH consumption). Notably, a small amount of electron uptake significantly induces NADH-consuming pathways over the stoichiometric contribution of the electrons as reducing equivalents. Our results demonstrate a previously unknown electroactivity and metabolic shift in the biochemical-producing heterotroph, opening up the possibility of efficient and enhanced production of electron-dense metabolites using electricity. PMID:25376371

12 CFR 1005.7 - Initial disclosures.

Code of Federal Regulations, 2012 CFR

2012-01-01

... disclosures required by this section at the time a consumer contracts for an electronic fund transfer service or before the first electronic fund transfer is made involving the consumer's account. (b) Content of... Banks and Banking BUREAU OF CONSUMER FINANCIAL PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E...

75 FR 27256 - Implementation of Section 304 of the Telecommunications Act of 1996: Commercial Availability of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-14

... Availability of Navigation Devices; Compatibility Between Cable Systems and Consumer Electronics Equipment... cable operators and the consumer electronics industry to establish the technical details of the... Cable and Telecommunications Association and the Consumer Electronics Association had agreed in a...

12 CFR 226.5 - General disclosure requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... conspicuously in writing, 7 in a form that the consumer may keep. 8 The disclosures required by this subpart may be provided to the consumer in electronic form, subject to compliance with the consumer consent and... to the consumer in electronic form without regard to the consumer consent or other provisions of the...

12 CFR 1005.3 - Coverage.

Code of Federal Regulations, 2014 CFR

2014-01-01

...-time electronic fund transfer from a consumer's account. The consumer must authorize the transfer. (ii... one-time electronic fund transfer (in providing a check to a merchant or other payee for the MICR... transfer. A consumer authorizes a one-time electronic fund transfer from his or her account to pay the fee...

12 CFR 1005.6 - Liability of consumer for unauthorized transfers.

Code of Federal Regulations, 2012 CFR

2012-01-01

... transfers. 1005.6 Section 1005.6 Banks and Banking BUREAU OF CONSUMER FINANCIAL PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E) § 1005.6 Liability of consumer for unauthorized transfers. (a) Conditions for..., for an unauthorized electronic fund transfer involving the consumer's account only if the financial...

Analyzing the environmental impacts of laptop enclosures using screening-level life cycle assessment to support sustainable consumer electronics (j/a)

EPA Science Inventory

The market growth of consumer electronics makes it essential for industries and policy-makers to work together to develop sustainable products. The objective of this study is to better understand how to promote environmentally sustainable consumer electronics by examining the use...

High-performance green flexible electronics based on biodegradable cellulose nanofibril paper

PubMed Central

Jung, Yei Hwan; Chang, Tzu-Hsuan; Zhang, Huilong; Yao, Chunhua; Zheng, Qifeng; Yang, Vina W.; Mi, Hongyi; Kim, Munho; Cho, Sang June; Park, Dong-Wook; Jiang, Hao; Lee, Juhwan; Qiu, Yijie; Zhou, Weidong; Cai, Zhiyong; Gong, Shaoqin; Ma, Zhenqiang

2015-01-01

Today's consumer electronics, such as cell phones, tablets and other portable electronic devices, are typically made of non-renewable, non-biodegradable, and sometimes potentially toxic (for example, gallium arsenide) materials. These consumer electronics are frequently upgraded or discarded, leading to serious environmental contamination. Thus, electronic systems consisting of renewable and biodegradable materials and minimal amount of potentially toxic materials are desirable. Here we report high-performance flexible microwave and digital electronics that consume the smallest amount of potentially toxic materials on biobased, biodegradable and flexible cellulose nanofibril papers. Furthermore, we demonstrate gallium arsenide microwave devices, the consumer wireless workhorse, in a transferrable thin-film form. Successful fabrication of key electrical components on the flexible cellulose nanofibril paper with comparable performance to their rigid counterparts and clear demonstration of fungal biodegradation of the cellulose-nanofibril-based electronics suggest that it is feasible to fabricate high-performance flexible electronics using ecofriendly materials. PMID:26006731

High-performance green flexible electronics based on biodegradable cellulose nanofibril paper.

PubMed

Jung, Yei Hwan; Chang, Tzu-Hsuan; Zhang, Huilong; Yao, Chunhua; Zheng, Qifeng; Yang, Vina W; Mi, Hongyi; Kim, Munho; Cho, Sang June; Park, Dong-Wook; Jiang, Hao; Lee, Juhwan; Qiu, Yijie; Zhou, Weidong; Cai, Zhiyong; Gong, Shaoqin; Ma, Zhenqiang

2015-05-26

Today's consumer electronics, such as cell phones, tablets and other portable electronic devices, are typically made of non-renewable, non-biodegradable, and sometimes potentially toxic (for example, gallium arsenide) materials. These consumer electronics are frequently upgraded or discarded, leading to serious environmental contamination. Thus, electronic systems consisting of renewable and biodegradable materials and minimal amount of potentially toxic materials are desirable. Here we report high-performance flexible microwave and digital electronics that consume the smallest amount of potentially toxic materials on biobased, biodegradable and flexible cellulose nanofibril papers. Furthermore, we demonstrate gallium arsenide microwave devices, the consumer wireless workhorse, in a transferrable thin-film form. Successful fabrication of key electrical components on the flexible cellulose nanofibril paper with comparable performance to their rigid counterparts and clear demonstration of fungal biodegradation of the cellulose-nanofibril-based electronics suggest that it is feasible to fabricate high-performance flexible electronics using ecofriendly materials.

High-performance green flexible electronics based on biodegradable cellulose nanofibril paper

NASA Astrophysics Data System (ADS)

Jung, Yei Hwan; Chang, Tzu-Hsuan; Zhang, Huilong; Yao, Chunhua; Zheng, Qifeng; Yang, Vina W.; Mi, Hongyi; Kim, Munho; Cho, Sang June; Park, Dong-Wook; Jiang, Hao; Lee, Juhwan; Qiu, Yijie; Zhou, Weidong; Cai, Zhiyong; Gong, Shaoqin; Ma, Zhenqiang

2015-05-01

Today's consumer electronics, such as cell phones, tablets and other portable electronic devices, are typically made of non-renewable, non-biodegradable, and sometimes potentially toxic (for example, gallium arsenide) materials. These consumer electronics are frequently upgraded or discarded, leading to serious environmental contamination. Thus, electronic systems consisting of renewable and biodegradable materials and minimal amount of potentially toxic materials are desirable. Here we report high-performance flexible microwave and digital electronics that consume the smallest amount of potentially toxic materials on biobased, biodegradable and flexible cellulose nanofibril papers. Furthermore, we demonstrate gallium arsenide microwave devices, the consumer wireless workhorse, in a transferrable thin-film form. Successful fabrication of key electrical components on the flexible cellulose nanofibril paper with comparable performance to their rigid counterparts and clear demonstration of fungal biodegradation of the cellulose-nanofibril-based electronics suggest that it is feasible to fabricate high-performance flexible electronics using ecofriendly materials.

12 CFR 1005.6 - Liability of consumer for unauthorized transfers.

Code of Federal Regulations, 2014 CFR

2014-01-01

... transfers. 1005.6 Section 1005.6 Banks and Banking BUREAU OF CONSUMER FINANCIAL PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E) General § 1005.6 Liability of consumer for unauthorized transfers. (a) Conditions... this section, for an unauthorized electronic fund transfer involving the consumer's account only if the...

12 CFR 1005.6 - Liability of consumer for unauthorized transfers.

Code of Federal Regulations, 2013 CFR

2013-01-01

... transfers. 1005.6 Section 1005.6 Banks and Banking BUREAU OF CONSUMER FINANCIAL PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E) General § 1005.6 Liability of consumer for unauthorized transfers. (a) Conditions... this section, for an unauthorized electronic fund transfer involving the consumer's account only if the...

Japan's electronic packaging technologies

NASA Technical Reports Server (NTRS)

Tummala, Rao R.; Pecht, Michael

1995-01-01

The JTEC panel found Japan to have significant leadership over the United States in the strategic area of electronic packaging. Many technologies and products once considered the 'heart and soul' of U.S. industry have been lost over the past decades to Japan and other Asian countries. The loss of consumer electronics technologies and products is the most notable of these losses, because electronics is the United States' largest employment sector and is critical for growth businesses in consumer products, computers, automobiles, aerospace, and telecommunications. In the past there was a distinction between consumer and industrial product technologies. While Japan concentrated on the consumer market, the United States dominated the industrial sector. No such distinction is anticipated in the future; the consumer-oriented technologies Japan has dominated are expected to characterize both domains. The future of U.S. competitiveness will, therefore, depend on the ability of the United States to rebuild its technological capabilities in the area of portable electronic packaging.

78 FR 71643 - Certain Wireless Consumer Electronics Devices and Components Thereof; Commission Determination To...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-29

... Electronics Devices and Components Thereof; Commission Determination To Review in Part A Final Initial... sale within the United States after importation of certain wireless consumer electronics devices and... Electronics, Inc. of Seoul, Korea and LG Electronics U.S.A., Inc. of Englewood Cliffs, New Jersey...

12 CFR 205.9 - Receipts at electronic terminals; periodic statements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.9 Receipts at electronic terminals; periodic..., a financial institution shall make a receipt available to a consumer at the time the consumer initiates an electronic fund transfer at an electronic terminal. The receipt shall set forth the following...

12 CFR 205.9 - Receipts at electronic terminals; periodic statements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.9 Receipts at electronic terminals; periodic..., a financial institution shall make a receipt available to a consumer at the time the consumer initiates an electronic fund transfer at an electronic terminal. The receipt shall set forth the following...

12 CFR 205.9 - Receipts at electronic terminals; periodic statements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.9 Receipts at electronic terminals; periodic..., a financial institution shall make a receipt available to a consumer at the time the consumer initiates an electronic fund transfer at an electronic terminal. The receipt shall set forth the following...

12 CFR 205.9 - Receipts at electronic terminals; periodic statements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.9 Receipts at electronic terminals; periodic..., a financial institution shall make a receipt available to a consumer at the time the consumer initiates an electronic fund transfer at an electronic terminal. The receipt shall set forth the following...

12 CFR 205.9 - Receipts at electronic terminals; periodic statements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.9 Receipts at electronic terminals; periodic..., a financial institution shall make a receipt available to a consumer at the time the consumer initiates an electronic fund transfer at an electronic terminal. The receipt shall set forth the following...

Consumers' views on generic medicines: a review of the literature.

PubMed

Hassali, Mohamed A A; Shafie, Asrul A; Jamshed, Shazia; Ibrahim, Mohamed I M; Awaisu, Ahmed

2009-04-01

To review the literature on consumers' knowledge, attitudes and opinions of the use of generic medicines. A narrative review of studies conducted from 1970 to 2008 on consumers perceptions and views towards generic medicines was performed. An extensive literature search was undertaken using indexing services available at the authors' institution library. The following keywords were used for the search: brand, generic, multisource, medications, medicines, drugs, pharmaceuticals and consumers, customers, and patients. Electronic databases searched were Medline, Inside Web, ISI Web of Knowledge, Science Direct, Springer Link, JSTOR, Proquest, Ebsco Host and Google Scholar. These electronic databases were searched for full text papers published in English from 1970 to October 2008. Twenty studies were identified. Eleven were from the USA, four were from Europe, two were from Canada and one each was from Australia, Brazil and Malaysia. In general, consumers showed mixed reactions towards the use of generic medicines. This was evident from the divergence of views observed by country development level, consumers' socioeconomic characteristics, drug product characteristics, pharmaceutical reimbursement system, policy environment, contact with health care professionals, past experience with medications, and knowledge of the seriousness of a medical condition. Patient confidence and knowledge pertaining to generic medicines use have increased over the past four decades, especially in developed countries. Mass educational efforts, financial incentives, and greater communication among patients and health care professionals were seen as major drivers to the uptake of generic medicines among consumers.

16 CFR 1500.88 - Exemptions from lead limits under section 101 of the Consumer Product Safety Improvement Act for...

Code of Federal Regulations, 2010 CFR

2010-01-01

... 101 of the Consumer Product Safety Improvement Act for certain electronic devices. 1500.88 Section... from lead limits under section 101 of the Consumer Product Safety Improvement Act for certain electronic devices. (a) The Consumer Product Safety Improvement Act (CPSIA) provides for specific lead limits...

12 CFR 1005.14 - Electronic fund transfer service provider not holding consumer's account.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 8 2012-01-01 2012-01-01 false Electronic fund transfer service provider not... PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E) § 1005.14 Electronic fund transfer service provider not holding consumer's account. (a) Provider of electronic fund transfer service. A person that provides an...

12 CFR 1005.14 - Electronic fund transfer service provider not holding consumer's account.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 8 2013-01-01 2013-01-01 false Electronic fund transfer service provider not... PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E) General § 1005.14 Electronic fund transfer service provider not holding consumer's account. (a) Provider of electronic fund transfer service. A person that...

12 CFR 1005.14 - Electronic fund transfer service provider not holding consumer's account.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 8 2014-01-01 2014-01-01 false Electronic fund transfer service provider not... PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E) General § 1005.14 Electronic fund transfer service provider not holding consumer's account. (a) Provider of electronic fund transfer service. A person that...

78 FR 56245 - Certain Wireless Consumer Electronics Devices and Components Thereof; Notice of Request for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-12

... Electronics Devices and Components Thereof; Notice of Request for Statements on the Public Interest AGENCY: U... wireless consumer electronics devices and components thereof imported by respondents Acer, Inc. of Taipei... Communications, Inc. of San Diego, California; LG Electronics, Inc. of Seoul, Korea; LG Electronics U.S.A., Inc...

High-performance green flexible electronics based on biodegradable cellulose nanofibril paper

Treesearch

Yei Hwan Jung; Tzu-Hsuan Chang; Huilong Zhang; Chunhua Yao; Qifeng Zheng; Vina W. Yang; Hongyi Mi; Munho Kim; Sang June Cho; Dong-Wook Park; Hao Jiang; Juhwan Lee; Yijie Qiu; Weidong Zhou; Zhiyong Cai; Shaoqin Gong; Zhenqiang Ma

2015-01-01

Today’s consumer electronics, such as cell phones, tablets and other portable electronic devices, are typically made of non-renewable, non-biodegradable, and sometimes potentially toxic (for example, gallium arsenide) materials. These consumer electronics are frequently upgraded or discarded, leading to serious environmental contamination. Thus, electronic systems...

Consumers Are Ready to Accept the Transition to Online and Electronic Records If They Can Be Assured of the Security Measures

PubMed Central

Chhanabhai, Prajesh; Holt, Alec

2007-01-01

Background Healthcare has entered the electronic domain. This domain has improved data collection and storage abilities while allowing almost instantaneous access and results to data queries. Furthermore, it allows direct communication between healthcare providers and health consumers. The development of privacy, confidentiality, and security principles are necessary to protect consumers' interests against inappropriate access. Studies have shown that the health consumer is the important stakeholder in this process. With the international push toward electronic health records (EHRs), this article presents the importance of secure EHR systems from the public's perspective. Objective To examine the public's perception of the security of electronic systems and report on how their perceptions can shape the building of stronger systems. Methods A cross-sectional survey (September-November 2005) of people attending healthcare providers (n = 400) was conducted in the 4 major cities in New Zealand. Participants were surveyed on computer use, knowledge of EHR-proposed benefits and issues, security issues, and demographics. Results A total of 300 surveys were completed and returned (a 75% response rate), with 180 (60%) being women. One hundred eighty-eight (62.6%) had not heard of EHRs, with those who had heard of them indicating that they were a positive innovation in the health sector. However, 202 (73.3%) participants were highly concerned about the security and privacy of their health records. This feeling was further accentuated when participants were asked about security of electronic systems. Participants were worried about hackers (79.4%), vendor access (72.7%), and malicious software (68%). Participants were also introduced to various security systems, and in each case, over 80% of participants believed that these would make EHR systems more secure. A number of chi-square tests were carried out with each variable, and it was found that there were strong relationships between age, location, computer use, EHR knowledge, and the concern for privacy and the security of medical records (P < .05). The survey also showed that there was a very small difference (9.8%) between health consumers who believed that paper records are more secure than EHRs and those who believed otherwise. Conclusions The findings showed that for the EHR to be fully integrating in the health sector, there are 2 main issues that need to be addressed: The security of the EHR system has to be of the highest level, and needs to be constantly monitored and updated.The involvement of the health consumer in the ownership and maintenance of their health record needs to be more proactive. The EHR aims to collect information to allow for “cradle to the grave” treatment; thus, the health consumer has to be seen as a major player in ensuring that this can happen correctly. The results from this study indicated that the consumer is ready to accept the transition, as long as one can be assured of the security of the system. PMID:17435617

Consumers are ready to accept the transition to online and electronic records if they can be assured of the security measures.

PubMed

Chhanabhai, Prajesh; Holt, Alec

2007-01-11

Healthcare has entered the electronic domain. This domain has improved data collection and storage abilities while allowing almost instantaneous access and results to data queries. Furthermore, it allows direct communication between healthcare providers and health consumers. The development of privacy, confidentiality, and security principles are necessary to protect consumers' interests against inappropriate access. Studies have shown that the health consumer is the important stakeholder in this process. With the international push toward electronic health records (EHRs), this article presents the importance of secure EHR systems from the public's perspective. To examine the public's perception of the security of electronic systems and report on how their perceptions can shape the building of stronger systems. A cross-sectional survey (September-November 2005) of people attending healthcare providers (n = 400) was conducted in the 4 major cities in New Zealand. Participants were surveyed on computer use, knowledge of EHR-proposed benefits and issues, security issues, and demographics. A total of 300 surveys were completed and returned (a 75% response rate), with 180 (60%) being women. One hundred eighty-eight (62.6%) had not heard of EHRs, with those who had heard of them indicating that they were a positive innovation in the health sector. However, 202 (73.3%) participants were highly concerned about the security and privacy of their health records. This feeling was further accentuated when participants were asked about security of electronic systems. Participants were worried about hackers (79.4%), vendor access (72.7%), and malicious software (68%). Participants were also introduced to various security systems, and in each case, over 80% of participants believed that these would make EHR systems more secure. A number of chi-square tests were carried out with each variable, and it was found that there were strong relationships between age, location, computer use, EHR knowledge, and the concern for privacy and the security of medical records (P < .05). The survey also showed that there was a very small difference (9.8%) between health consumers who believed that paper records are more secure than EHRs and those who believed otherwise. The findings showed that for the EHR to be fully integrating in the health sector, there are 2 main issues that need to be addressed: The security of the EHR system has to be of the highest level, and needs to be constantly monitored and updated. The involvement of the health consumer in the ownership and maintenance of their health record needs to be more proactive. The EHR aims to collect information to allow for "cradle to the grave" treatment; thus, the health consumer has to be seen as a major player in ensuring that this can happen correctly. The results from this study indicated that the consumer is ready to accept the transition, as long as one can be assured of the security of the system.

Benefits and Risks of Electronic Medical Record (EMR): An Interpretive Analysis of Healthcare Consumers' Perceptions of an Evolving Health Information Systems Technology

ERIC Educational Resources Information Center

Thompson, Chester D.

2013-01-01

The purpose of this study is to explore healthcare consumers' perceptions of their Electronic Medical Records (EMRs). Although there have been numerous studies regarding EMRs, there have been minimal, if any, research that explores healthcare consumers' awareness of this technology and the social implications that result. As consumers' health…

12 CFR 1005.9 - Receipts at electronic terminals; periodic statements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... TRANSFERS (REGULATION E) General § 1005.9 Receipts at electronic terminals; periodic statements. (a... institution shall make a receipt available to a consumer at the time the consumer initiates an electronic fund transfer at an electronic terminal. The receipt shall set forth the following information, as applicable...

12 CFR 1005.9 - Receipts at electronic terminals; periodic statements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... TRANSFERS (REGULATION E) General § 1005.9 Receipts at electronic terminals; periodic statements. (a... institution shall make a receipt available to a consumer at the time the consumer initiates an electronic fund transfer at an electronic terminal. The receipt shall set forth the following information, as applicable...

12 CFR 1005.9 - Receipts at electronic terminals; periodic statements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... TRANSFERS (REGULATION E) § 1005.9 Receipts at electronic terminals; periodic statements. (a) Receipts at... shall make a receipt available to a consumer at the time the consumer initiates an electronic fund transfer at an electronic terminal. The receipt shall set forth the following information, as applicable...

Building a Terabyte Memory Bandwidth Compute Node with Four Consumer Electronics GPUs

NASA Astrophysics Data System (ADS)

Omlin, Samuel; Räss, Ludovic; Podladchikov, Yuri

2014-05-01

GPUs released for consumer electronics are generally built with the same chip architectures as the GPUs released for professional usage. With regards to scientific computing, there are no obvious important differences in functionality or performance between the two types of releases, yet the price can differ up to one order of magnitude. For example, the consumer electronics release of the most recent NVIDIA Kepler architecture (GK110), named GeForce GTX TITAN, performed equally well in conducted memory bandwidth tests as the professional release, named Tesla K20; the consumer electronics release costs about one third of the professional release. We explain how to design and assemble a well adjusted computer with four high-end consumer electronics GPUs (GeForce GTX TITAN) combining more than 1 terabyte/s memory bandwidth. We compare the system's performance and precision with the one of hardware released for professional usage. The system can be used as a powerful workstation for scientific computing or as a compute node in a home-built GPU cluster.

12 CFR 1005.3 - Coverage.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Banking BUREAU OF CONSUMER FINANCIAL PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E) General § 1005.3... Consumer Financial Protection Act of 2010, Title X of the Dodd-Frank Wall Street Reform and Consumer Protection Act, Public Law 111-203, 124 Stat. 1376. (b) Electronic fund transfer. (1) Definition. The term...

12 CFR 1005.3 - Coverage.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Banking BUREAU OF CONSUMER FINANCIAL PROTECTION ELECTRONIC FUND TRANSFERS (REGULATION E) § 1005.3 Coverage... Consumer Financial Protection Act of 2010, Title X of the Dodd-Frank Wall Street Reform and Consumer Protection Act, Public Law 111-203, 124 Stat. 1376. (b) Electronic fund transfer—(1) Definition. The term...

12 CFR 205.11 - Procedures for resolving errors.

Code of Federal Regulations, 2010 CFR

2010-01-01

... institution's findings and shall note the consumer's right to request the documents that the institution... transfer; (ii) An incorrect electronic fund transfer to or from the consumer's account; (iii) The omission... made by the financial institution relating to an electronic fund transfer; (v) The consumer's receipt...

Frugal Droplet Microfluidics Using Consumer Opto-Electronics.

PubMed

Frot, Caroline; Taccoen, Nicolas; Baroud, Charles N

2016-01-01

The maker movement has shown how off-the-shelf devices can be combined to perform operations that, until recently, required expensive specialized equipment. Applying this philosophy to microfluidic devices can play a fundamental role in disseminating these technologies outside specialist labs and into industrial use. Here we show how nanoliter droplets can be manipulated using a commercial DVD writer, interfaced with an Arduino electronic controller. We couple the optical setup with a droplet generation and manipulation device based on the "confinement gradients" approach. This device uses regions of different depths to generate and transport the droplets, which further simplifies the operation and reduces the need for precise flow control. The use of robust consumer electronics, combined with open source hardware, leads to a great reduction in the price of the device, as well as its footprint, without reducing its performance compared with the laboratory setup.

Frugal Droplet Microfluidics Using Consumer Opto-Electronics

PubMed Central

Frot, Caroline; Taccoen, Nicolas; Baroud, Charles N.

2016-01-01

The maker movement has shown how off-the-shelf devices can be combined to perform operations that, until recently, required expensive specialized equipment. Applying this philosophy to microfluidic devices can play a fundamental role in disseminating these technologies outside specialist labs and into industrial use. Here we show how nanoliter droplets can be manipulated using a commercial DVD writer, interfaced with an Arduino electronic controller. We couple the optical setup with a droplet generation and manipulation device based on the “confinement gradients” approach. This device uses regions of different depths to generate and transport the droplets, which further simplifies the operation and reduces the need for precise flow control. The use of robust consumer electronics, combined with open source hardware, leads to a great reduction in the price of the device, as well as its footprint, without reducing its performance compared with the laboratory setup. PMID:27560139

In Front of (e)Readers

ERIC Educational Resources Information Center

Hadro, Josh

2010-01-01

To quote "Will & Grace," the Consumer Electronics Show (CES) in Las Vegas, Nevada, January 7-10, was "a nightmare/delightful!" Five times larger than even the largest library conference, the show's 35 football field-long bazaar of technology marvels and gimmicks--along with thousands of reps hawking them--was almost enough to put a person off…

12 CFR 40.7 - Form of opt out notice to consumers; opt out methods.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., if the consumer agrees, electronically. (2) When a customer relationship terminates, the customer's... during or related to that relationship. If the individual subsequently establishes a new customer... opt out notice in writing or, if the consumer agrees, electronically. (d) Joint relationships. (1) If...

16 CFR 313.7 - Form of opt out notice to consumers; opt out methods.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., electronically. (2) When a customer relationship terminates, the customer's opt out direction continues to apply... the individual subsequently establishes a new customer relationship with you, the opt out direction... writing or, if the consumer agrees, electronically. (d) Joint relationships—(1) If two or more consumers...

12 CFR 332.7 - Form of opt out notice to consumers; opt out methods.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., electronically. (2) When a customer relationship terminates, the customer's opt out direction continues to apply... the individual subsequently establishes a new customer relationship with you, the opt out direction... writing or, if the consumer agrees, electronically. (d) Joint relationships—(1) If two or more consumers...

12 CFR 216.7 - Form of opt out notice to consumers; opt out methods.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., electronically. (2) When a customer relationship terminates, the customer's opt out direction continues to apply... the individual subsequently establishes a new customer relationship with you, the opt out direction... writing or, if the consumer agrees, electronically. (d) Joint relationships—(1) If two or more consumers...

12 CFR 205.3 - Coverage.

Code of Federal Regulations, 2014 CFR

2014-01-01

... to initiate a one-time electronic fund transfer from a consumer's account. The consumer must...-time electronic fund transfer (in providing a check to a merchant or other payee for the MICR encoding... information for the transfer shall also provide a notice to the consumer at the same time it provides the...

12 CFR 205.3 - Coverage.

Code of Federal Regulations, 2011 CFR

2011-01-01

... to initiate a one-time electronic fund transfer from a consumer's account. The consumer must...-time electronic fund transfer (in providing a check to a merchant or other payee for the MICR encoding... information for the transfer shall also provide a notice to the consumer at the same time it provides the...

12 CFR 205.3 - Coverage.

Code of Federal Regulations, 2013 CFR

2013-01-01

... to initiate a one-time electronic fund transfer from a consumer's account. The consumer must...-time electronic fund transfer (in providing a check to a merchant or other payee for the MICR encoding... information for the transfer shall also provide a notice to the consumer at the same time it provides the...

12 CFR 205.14 - Electronic fund transfer service provider not holding consumer's account.

Code of Federal Regulations, 2010 CFR

2010-01-01

... consumer learns of the loss or theft; and extends the time periods for reporting unauthorized transfers or... 12 Banks and Banking 2 2010-01-01 2010-01-01 false Electronic fund transfer service provider not... GOVERNORS OF THE FEDERAL RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.14 Electronic fund...

12 CFR 205.14 - Electronic fund transfer service provider not holding consumer's account.

Code of Federal Regulations, 2013 CFR

2013-01-01

... consumer learns of the loss or theft; and extends the time periods for reporting unauthorized transfers or... 12 Banks and Banking 2 2013-01-01 2013-01-01 false Electronic fund transfer service provider not... GOVERNORS OF THE FEDERAL RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.14 Electronic fund...

12 CFR 205.14 - Electronic fund transfer service provider not holding consumer's account.

Code of Federal Regulations, 2014 CFR

2014-01-01

... consumer learns of the loss or theft; and extends the time periods for reporting unauthorized transfers or... 12 Banks and Banking 2 2014-01-01 2014-01-01 false Electronic fund transfer service provider not... GOVERNORS OF THE FEDERAL RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.14 Electronic fund...

12 CFR 205.14 - Electronic fund transfer service provider not holding consumer's account.

Code of Federal Regulations, 2011 CFR

2011-01-01

... consumer learns of the loss or theft; and extends the time periods for reporting unauthorized transfers or... 12 Banks and Banking 2 2011-01-01 2011-01-01 false Electronic fund transfer service provider not... GOVERNORS OF THE FEDERAL RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.14 Electronic fund...

12 CFR 205.14 - Electronic fund transfer service provider not holding consumer's account.

Code of Federal Regulations, 2012 CFR

2012-01-01

... consumer learns of the loss or theft; and extends the time periods for reporting unauthorized transfers or... 12 Banks and Banking 2 2012-01-01 2012-01-01 false Electronic fund transfer service provider not... GOVERNORS OF THE FEDERAL RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.14 Electronic fund...

Consumer Information in the Electronic Media: Neutral Information, Advertising, Selling. Working Paper No. 4.

ERIC Educational Resources Information Center

Sepstrup, Preben; Olander, Folke

This paper presents a self-contained summary in English of the results of a research project conducted for the Nordic Council of Ministers to define problems, advantages, and disadvantages of the electronic dissemination of information for consumers, and to determine whether consumer organizations should adapt their information activities and…

CES 2011: Tablet Crazy

ERIC Educational Resources Information Center

Rapp, David

2011-01-01

Ereaders are so last year. Tablets were the watchword at this year's annual Consumer Electronics Show (CES) in Las Vegas, January 6-9. This year, the show set new records, with some 2700 companies from around the world exhibiting at the multiple exhibition halls and 30,000 attendees gawking at the products. What did they see? There were still some…

Short pulse free electron laser amplifier

DOEpatents

Schlitt, Leland G.; Szoke, Abraham

1985-01-01

Method and apparatus for amplification of a laser pulse in a free electron laser amplifier where the laser pulse duration may be a small fraction of the electron beam pulse duration used for amplification. An electron beam pulse is passed through a first wiggler magnet and a short laser pulse to be amplified is passed through the same wiggler so that only the energy of the last fraction, f, (f<1) of the electron beam pulse is consumed in amplifying the laser pulse. After suitable delay of the electron beam, the process is repeated in a second wiggler magnet, a third, . . . , where substantially the same fraction f of the remainder of the electron beam pulse is consumed in amplification of the given short laser pulse in each wiggler magnet region until the useful electron beam energy is substantially completely consumed by amplification of the laser pulse.

Production of Methane During Anaerobic Degradation of Ethanol in Gasoline

EPA Science Inventory

Field and laboratory studies show that the natural biodegradation of benzene may be inhibited by the presence of ethanol. Preferential biodegradation of ethanol can consume electron acceptors such as sulfate, nitrate, or oxygen that are needed for BTEX biodegradation. An additi...

77 FR 31876 - Certain Consumer Electronics and Display Devices and Products Containing Same Determination Not...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-30

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-836] Certain Consumer Electronics and Display Devices and Products Containing Same Determination Not To Review Initial Determination To Amend... electronics and display devices and products containing the same by reason of infringement of U.S. Patent Nos...

78 FR 49365 - Electronic Fund Transfers (Regulation E); Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-14

... BUREAU OF CONSUMER FINANCIAL PROTECTION 12 CFR Part 1005 [Docket No. CFPB-2012-0050] RIN 3170-AA33 Electronic Fund Transfers (Regulation E); Correction AGENCY: Bureau of Consumer Financial Protection. ACTION... 2013 Final Rule, which along with three other final rules \\1\\ implements the Electronic Fund Transfer...

Consumer Cost Differences for Traditional and Internet Markets.

ERIC Educational Resources Information Center

Shaw, Michael J.; Strader, Troy J.

1999-01-01

Addresses research issues related to the economics of electronic, Internet-based markets. Discusses consumer cost-based differences for traditional and electronic markets; revenue implications for sellers and transaction intermediaries; and results of an empirical, survey-based study of an electronic market in the sports trading-card industry.…

75 FR 19959 - Energy Conservation Program for Consumer Products: Notice of Petition for Waiver of Samsung...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-16

... Conservation Program for Consumer Products: Notice of Petition for Waiver of Samsung Electronics America, Inc.... SUMMARY: This notice announces receipt of and publishes the Samsung Electronics America, Inc. (Samsung... information for the petitioner is: Mr. Michael Moss, Samsung Electronics America, Inc., 18600 Broadwick St...

76 FR 21881 - Energy Conservation Program for Consumer Products: Notice of Petition for Waiver of Samsung...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-19

... Conservation Program for Consumer Products: Notice of Petition for Waiver of Samsung Electronics America, Inc... comments. SUMMARY: This notice announces receipt of and publishes the Samsung Electronics America, Inc..., Samsung Electronics America, Inc., 18600 Broadwick Street, Rancho Dominguez, CA 90220. According to 10 CFR...

76 FR 11228 - Energy Conservation Program for Consumer Products: Notice of Petition for Waiver of LG...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-01

... Conservation Program for Consumer Products: Notice of Petition for Waiver of LG Electronics USA, Inc. From the... notice announces receipt of and publishes the LG Electronics USA, Inc. (LG) petition for waiver and... is: John I. Taylor, Vice President, Government Relations and Communications, LG Electronics USA, Inc...

75 FR 45623 - Energy Conservation Program for Consumer Products: Decision and Order Granting a Waiver to...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-03

... Conservation Program for Consumer Products: Decision and Order Granting a Waiver to Samsung Electronics America...-014) that grants to Samsung Electronics America, Inc. (Samsung) a waiver from the DOE electric... Energy. Decision and Order In the Matter of: Samsung Electronics America, Inc. (Case No. RF- 014...

Consumer Electronics Testing to Fast-Rise EMP (Electromagnetic Pulse) (VEMPS (Vertical Electromagnetic Pulse Simulator) 2 Development)

DTIC Science & Technology

1989-06-01

Fast-Rise EMP ( VEMPS 11 Development) 12. PERSONAL AUTHOR(S) Vincent J. Ellis 13a. TYPE OF REPORT 13b. TIME COVERED 14. DATE OF REPORT (Year Mot.Dy...SUBJECT TERMS (Continue on reverse if necessary andJ identity by block nwitib") 09EL 03U SBGR EMP, VEMPS 11, consumer electronics, FEMPS, EMP simulation... VEMPS 11), Because of the unique petrr! ance characteristics of VEMPS 11 and the technological changes In consumer electronics over the past 10 years

NASA Technology Transfer - Human Robot Teaming

NASA Image and Video Library

2016-12-23

Produced for Intelligent Robotics Group to show at January 2017 Consumer Electronics Show (CES). Highlights development of VERVE (Visual Environment for Remote Virtual Exploration) software used on K-10, K-REX, SPHERES and AstroBee projects for 3D awareness. Also mentions transfer of software to Nissan for their development in their Autonomous Vehicle project. Video includes Nissan's self-driving car around NASA Ames.

Boosting beauty in an economic decline: mating, spending, and the lipstick effect.

PubMed

Hill, Sarah E; Rodeheffer, Christopher D; Griskevicius, Vladas; Durante, Kristina; White, Andrew Edward

2012-08-01

Although consumer spending typically declines in economic recessions, some observers have noted that recessions appear to increase women's spending on beauty products--the so-called lipstick effect. Using both historical spending data and rigorous experiments, the authors examine how and why economic recessions influence women's consumer behavior. Findings revealed that recessionary cues--whether naturally occurring or experimentally primed--decreased desire for most products (e.g., electronics, household items). However, these cues consistently increased women's desire for products that increase attractiveness to mates--the first experimental demonstration of the lipstick effect. Additional studies show that this effect is driven by women's desire to attract mates with resources and depends on the perceived mate attraction function served by these products. In addition to showing how and why economic recessions influence women's desire for beauty products, this research provides novel insights into women's mating psychology, consumer behavior, and the relationship between the two.

Trampoline Safety in Childhood and Adolescence

MedlinePlus

... ABBREVIATIONS AAP — American Academy of Pediatrics NEISS — National Electronic Injury Surveillance System USCPSC — US Consumer Product Safety ... US Consumer Product Safety Com- mission ’ s (USCPSC) National Electronic Injury Surveillance System (NEISS). 6 Trampoline injuries increased ...

77 FR 11156 - Notice of Receipt of Complaint; Solicitation of Comments Relating to the Public Interest

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-24

... Certain Consumer Electronics, Including Mobile Phones and Tablets, DN 2878; the Commission is soliciting... importation of certain consumer electronics, including mobile phones and tablets. The complaint names as...

76 FR 13169 - Energy Conservation Program for Consumer Products: Decision and Order Granting a Waiver to...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-10

... Conservation Program for Consumer Products: Decision and Order Granting a Waiver to Samsung Electronics America... Electronics America, Inc. (Samsung) a waiver from the DOE clothes washer test procedure for determining the.... Decision and Order In the Matter of: Samsung Electronics America, Inc. (Case No. CW- 014) I. Background and...

75 FR 13120 - Energy Conservation Program for Consumer Products: Decision and Order Granting a Waiver to...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-18

... Conservation Program for Consumer Products: Decision and Order Granting a Waiver to Samsung Electronics America... (Case No. RF-011) that grants to Samsung Electronics America, Inc. (Samsung) a waiver from the DOE... and Order In the Matter of: Samsung Electronics America, Inc. (Case No. RF- 011). Background Title III...

75 FR 71680 - Energy Conservation Program for Consumer Products: Notice of Petition for Waiver of LG...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-24

... Conservation Program for Consumer Products: Notice of Petition for Waiver of LG Electronics USA, Inc. from the... and publishes the LG Electronics USA, Inc. (LG) petition for waiver (hereafter, ``petition'') from... Communications, LG Electronics USA, Inc., 1776 K Street, NW., Washington, DC 20006; (202) 719-3490; E-mail: john...

Discriminating aging and protein-to-fat ratio in Cheddar cheese using sensory analysis and a potentiometric electronic tongue.

PubMed

Lipkowitz, Jackie B; Ross, Carolyn F; Diako, Charles; Smith, Denise M

2018-03-01

The objectives of this study were to evaluate the flavor and taste attributes of full-fat Cheddar cheeses with different protein-to-fat ratios (PFR) over aging time using a descriptive sensory analysis panel and a consumer panel, and to correlate these attributes with instrumental parameters obtained by the potentiometric electronic tongue. Three Cheddar cheese formulations (PFR of 0.74, 0.85, and 1.01) were produced in triplicate and composition was verified. Cheese was aged at 7.2°C and evaluated at 2, 5, 8, 10, 11, and 12 mo by a trained panel (n = 10) for 8 flavor and 5 taste attributes and using an electronic tongue for 7 nonvolatile taste attributes. Cheese aged for 12 mo was also evaluated by a consumer sensory panel for liking and intensity attributes. Principal component analysis was performed to discriminate cheese based on aging time and PFR, whereas correlation between sensory and instrumental attributes was assessed using partial least squares regression. Descriptive sensory analysis of flavor and taste attributes differentiated Cheddar cheeses over aging time, but not among PFR formulations. The electronic tongue distinguished changes among cheese samples due to PFR formulation and aging time. The electronic tongue proved successful in characterizing the nonvolatile flavor components in Cheddar cheese and correlated with taste perceptions measured by descriptive sensory analysis. Consumer evaluations showed distinctive attribute profiles for the 3 PFR Cheddar cheese formulations. Overall, higher fat content was associated with increased flavor intensities in Cheddar cheese and drove consumer acceptability and purchase intent ratings. The electronic tongue detected smaller changes in tastes (bitter, metallic, salty, sour, spicy, sweet, and umami) of the 3 PFR formulations over time when compared with the trained panelists, who detected no differences, suggesting that the electronic tongue may be more sensitive to tastants than humans and may have the capability for early detection or identification of problems in a batch of cheese during aging. Results suggest taste quality of cheese may be monitored using the electronic tongue with greater sensitivity than a trained panel, and may be more objective, rapid, and cost effective than human panelists. Copyright © 2018 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Electronics manufacturing and assembly in Japan

NASA Technical Reports Server (NTRS)

Kukowski, John A.; Boulton, William R.

1995-01-01

In the consumer electronics industry, precision processing technology is the basis for enhancing product functions and for minimizing components and end products. Throughout Japan, manufacturing technology is seen as critical to the production and assembly of advanced products. While its population has increased less than 30 percent over twenty-five years, Japan's gross national product has increase thirtyfold; this growth has resulted in large part from rapid replacement of manual operations with innovative, high-speed, large-scale, continuously running, complex machines that process a growing number of miniaturized components. The JTEC panel found that introduction of next-generation electronics products in Japan goes hand-in-hand with introduction of new and improved production equipment. In the panel's judgment, Japan's advanced process technologies and equipment development and its highly automated factories are crucial elements of its domination of the consumer electronics marketplace - and Japan's expertise in manufacturing consumer electronics products gives it potentially unapproachable process expertise in all electronics markets.

16 CFR 682.1 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Practices FEDERAL TRADE COMMISSION THE FAIR CREDIT REPORTING ACT DISPOSAL OF CONSUMER REPORT INFORMATION AND..., whether in paper, electronic, or other form, that is a consumer report or is derived from a consumer report. Consumer information also means a compilation of such records. Consumer information does not...

78 FR 9667 - Foreign-Trade Zone 50-Long Beach, California; Notification of Proposed Production Activity...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-11

... Consumer Electronics); Anaheim, CA The Board of Harbor Commissioners of the Port of Long Beach, grantee of... located within Site 31 of FTZ 50. The facility is used for the kitting of consumer electronics parts into...

78 FR 12354 - Certain Wireless Consumer Electronics Devices and Components Thereof; Commission Determination...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-22

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-853] Certain Wireless Consumer Electronics Devices and Components Thereof; Commission Determination Concerning an Initial Determination Granting a Motion To Amend Complaint and Notice of Investigation AGENCY: U.S. International Trade...

Beneficial Effects of Two Types of Personal Health Record Services Connected With Electronic Medical Records Within the Hospital Setting.

PubMed

Lee, Jisan; Kim, James G Boram; Jin, Meiling; Ahn, Kiwhan; Kim, Byungjun; Kim, Sukwha; Kim, Jeongeun

2017-11-01

Healthcare consumers must be able to make decisions based on accurate health information. To assist with this, we designed and developed an integrated system connected with electronic medical records in hospitals to ensure delivery of accurate health information. The system-called the Consumer-centered Open Personal Health Record platform-is composed of two services: a portal for users with any disease and a mobile application for users with cleft lip/palate. To assess the benefits of these services, we used a quasi-experimental, pretest-posttest design, assigning participants to the portal (n = 50) and application (n = 52) groups. Both groups showed significantly increased knowledge, both objective (actual knowledge of health information) and subjective (perceived knowledge of health information), after the intervention. Furthermore, while both groups showed higher information needs satisfaction after the intervention, the application group was significantly more satisfied. Knowledge changes were more affected by participant characteristics in the application group. Our results may be due to the application's provision of specific disease information and a personalized treatment plan based on the participant and other users' data. We recommend that services connected with electronic medical records target specific diseases to provide personalized health management to patients in a hospital setting.

Consumer behaviour and environmental education in the field of waste electrical and electronic toys: a Spanish case study.

PubMed

Pérez-Belis, V; Bovea, M D; Simó, A

2015-02-01

This paper reports on a project focused on obtaining the current consumption and disposal habits of electrical and electronic toys from a survey aimed at parents of children of nine pre- and primary schools. In addition, it is also focused on identifying the most effective way of transmitting environmental information to parents and children to promote the collection of electrical and electronic toys at their end-of-life. The study was implemented in a Spanish municipality. With regard to the consumption habits, aspects related to the amount of toys that children receive annually and percentage of those which are electrical and electronic toys have been obtained and classified according to the family size. Results from Chi-squared analysis and Ordinal Logistic Regression show that there is a statistically significance relationship among these variables. Regarding disposal habits, aspects related to the reasons and way for discarding electrical and electronic toys, time that toys are kept at home or the willingness to rent or buy second hand e-toys have been obtained. What really attracts attention is that, apart from consumers who donate the toy to family or social associations, 67.1% of consumers discard them along with other waste fractions in domestic bins, whereas only 32.9% do so at recycling points, as Directive 2012/19/EU requires. To increase this percentage, three environmental education actions (distinguishing from each other by the way used to transmit the environmental information: paper, audiovisual or personal communication) have been designed, applied and evaluated their efficiency according to the amount of waste toys collected. Copyright © 2014 Elsevier Ltd. All rights reserved.

12 CFR 205.7 - Initial disclosures.

Code of Federal Regulations, 2014 CFR

2014-01-01

... TRANSFERS (REGULATION E) § 205.7 Initial disclosures. (a) Timing of disclosures. A financial institution shall make the disclosures required by this section at the time a consumer contracts for an electronic fund transfer service or before the first electronic fund transfer is made involving the consumer's...

12 CFR 205.7 - Initial disclosures.

Code of Federal Regulations, 2010 CFR

2010-01-01

... TRANSFERS (REGULATION E) § 205.7 Initial disclosures. (a) Timing of disclosures. A financial institution shall make the disclosures required by this section at the time a consumer contracts for an electronic fund transfer service or before the first electronic fund transfer is made involving the consumer's...

Warning Statements and Safety Practices among Manufacturers and Distributors of Electronic Cigarette Liquids in the United States.

PubMed

Fagan, Pebbles; Pokhrel, Pallav; Herzog, Thaddeus A; Guy, Mignonne C; Sakuma, Kari-Lyn K; Trinidad, Dennis R; Cassel, Kevin; Jorgensen, Dorothy; Lynch, Tania; Felicitas-Perkins, Jamie Q; Palafox, Sherilyn; Hamamura, Faith; Maloney, Sarah; Degree, Kaylah; Sterling, Kymberle; Moolchan, Eric; Clanton, Mark S; Eissenberg, Thomas

2017-05-18

Prior to the Food and Drug Administration's (FDA) regulation of electronic cigarettes and warning statements related to nicotine addiction, there was no critical examination of manufacturer/distributor voluntary practices that could potentially inform FDA actions aimed to protect consumers. This study examined the content of warning statements and safety characteristics of electronic cigarette liquid bottles using a national sample. Research staff randomly selected four electronic cigarette liquid manufacturers/distributors from four U.S. geographic regions. Staff documented the characteristics of product packaging and content of warning statements on 147 electronic cigarette liquids (0-30 mg/ml of nicotine) purchased online from 16 manufacturers/distributors in April of 2016. Data showed that 97.9% of the electronic cigarette liquid bottles included a warning statement, most of which focused on nicotine exposure rather than health. Only 22.4% of bottles used a warning statement that indicated the product "contained nicotine". Of bottles that advertised a nicotine-based concentration of 12 mg/ml, 26% had a warning statements stated that the product "contains nicotine". None of the statements that indicated that the product "contained nicotine" stated that nicotine was "addictive". All bottles had a safety cap and 12% were in plastic shrink-wrap. Fifty-six percent of the websites had a minimum age requirement barrier that prevented under-aged persons from entering. Most manufacturers/distributors printed a warning statement on electronic cigarette liquid bottles, but avoided warning consumers about the presence and the addictiveness of nicotine. Studies are needed to examine manufacturer/distributor modifications to product packaging and how packaging affects consumer behaviors. These data can inform future FDA requirements related to the packaging and advertising of e-cigarette liquids; regulation related to the content of warning statements, including exposure warning statements, which are not currently mandated; and requirements on websites or language on packaging to help manufacturers adhere to the minimum age of purchase regulation. The data can also be used to help FDA develop additional guidance on the framing of statements on packaging that helps consumers make informed decisions about purchasing the product or protecting young people from use or unintentional exposure to the product. © The Author 2017. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Development of the consumption behavior that promotes sustainable society: Focusing on recycling of small waste home appliances

NASA Astrophysics Data System (ADS)

Ichinose, Takae

2015-04-01

Hiroshima University High School (HUHS) became the first UNESCO Associated School in Japan in 1953, and since then it has practiced ESD in various educational activities in all ranges of education. As a teacher of home economics, I have focused on consumer affairs and encouraged my students to consider what each of them can do as an individual consumer in order to create a sustainable society. In Japan, several acts related to consumer affairs have been enforced in recent years. "Act on Promotion of Consumer Education" was enforced in December 2012, and construction of the "Consumer Citizen Society" was proposed. It places emphasis not only on environmental concerns but also on the initiative of consumers and its influence on social and economic trends. In addition, "Act on Promotion of Recycling of Small Waste Electrical and Electronic Equipment" was enforced in April, 2013. It aims at protecting living environment and healthy development of the national economy by appropriate treatment of waste materials and effective use of resources. For my lessons on "food, clothing and shelter in relation to consumption behavior and environmental problems", I took up "the recycling of small waste home appliances" as the teaching materials to raise awareness on resources recycling. The purpose of the lessons is three-fold: (1) to make students aware of environmental load; (2) to deepen the understanding of the influence which excessive consumption has on developing countries; (3) to encourage the students to think positively toward the solution of the problems. I am currently practicing the lessons, and I have shown below the summary of the instruction. Lesson 1: Give a quiz based on the database on environmental label from Ministry of the Environment website. Then show a film on whereabouts of the hi-tech industrial waste (e-waste). After the film, show some everyday products for which mineral resources are used in order to impress the idea of "urban mine". Lesson 2: Show a video site on "Act on Promotion of Recycling of Small Waste Electrical and Electronic Equipment" uploaded by the Ministry of the Environment. The video site is shown with reference to "Basel Convention" and "Waste Electrical and Electronic Equipment Directive", which have been already taught in social study class. After the video, tell the students what DOWA Holdings Co., Ltd. group has accomplished with its DOWA ecosystem as a frontrunner of the recycling of small waste home appliances, and make the students think about the responsibilities of consumers. Through these lessons, I expect my students to be aware of the influence of their consumption behavior and think over eco-friendly lifestyles and support for developing countries. Consideration for others, not only for people at present but for future generations, will surely cultivate willingness to contribute to sustainable development.

Liquid lens based on electrowetting: a new adaptive component for imaging applications in consumer electronics

NASA Astrophysics Data System (ADS)

Crassous, Jerome; Gabay, Claude; Liogier, Gaetan; Berge, Bruno

2004-12-01

A new technology for focus variation with direct electric control without moving part will be presented. The technology relies on an interface between two non-miscible transparent liquids, which can be deformed by electrowetting. This technology has been developed since 10 years in the lab and starts to be available commercially, with the following characteristics: large amplitude of dioptric correction (20 dioptries for a 5mm pupil size), fast response, small power consumption and good transmission in the visible range, clear pupil 1-10mm diameter. This paper will show the basic principle, as well as the physical limitations and optical aberrations due to differential thermal expansion of the two liquids in the cell. Experimental measurements made with a Schack Hartmann wave front analyzer will be presented, as well as numerical simulations of the liquid-liquid interface. Applications will be discussed, mainly in consumer electronics.

12 CFR 205.15 - Electronic fund transfer of government benefits.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) Account balance. The means by which the consumer may obtain information concerning the account balance... history or other account information, under paragraph (c) of this section, in which the error is first... consumer for use in initiating an electronic fund transfer of government benefits from an account, other...

Consumer Electronic Product Servicing. Florida Vocational Program Guide.

ERIC Educational Resources Information Center

University of South Florida, Tampa. Dept. of Adult and Vocational Education.

This packet contains a program guide and Career Merit Achievement Plan (Career MAP) for the implementation of a consumer electronic product servicing program in Florida secondary and postsecondary schools. The program guide describes the program content and structure, provides a program description, lists job titles under the program, and includes…

Consumer behaviour and environmental education in the field of waste electrical and electronic toys: A Spanish case study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pérez-Belis, V.; Bovea, M.D., E-mail: bovea@uji.es; Simó, A.

Highlights: • Consumption/disposal habits of waste electrical and electronic toys. • Environmental education as a key factor to improve WEEE management. • Three environmental education actions to increase the collection of waste toys. - Abstract: This paper reports on a project focused on obtaining the current consumption and disposal habits of electrical and electronic toys from a survey aimed at parents of children of nine pre- and primary schools. In addition, it is also focused on identifying the most effective way of transmitting environmental information to parents and children to promote the collection of electrical and electronic toys at theirmore » end-of-life. The study was implemented in a Spanish municipality. With regard to the consumption habits, aspects related to the amount of toys that children receive annually and percentage of those which are electrical and electronic toys have been obtained and classified according to the family size. Results from Chi-squared analysis and Ordinal Logistic Regression show that there is a statistically significance relationship among these variables. Regarding disposal habits, aspects related to the reasons and way for discarding electrical and electronic toys, time that toys are kept at home or the willingness to rent or buy second hand e-toys have been obtained. What really attracts attention is that, apart from consumers who donate the toy to family or social associations, 67.1% of consumers discard them along with other waste fractions in domestic bins, whereas only 32.9% do so at recycling points, as Directive 2012/19/EU requires. To increase this percentage, three environmental education actions (distinguishing from each other by the way used to transmit the environmental information: paper, audiovisual or personal communication) have been designed, applied and evaluated their efficiency according to the amount of waste toys collected.« less

Chapter 14: Electron Microscopy on Thin Films for Solar Cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Romero, Manuel; Abou-Ras, Daniel; Nichterwitz, Melanie

2016-07-22

This chapter overviews the various techniques applied in scanning electron microscopy (SEM) and transmission electron microscopy (TEM), and highlights their possibilities and also limitations. It gives the various imaging and analysis techniques applied on a scanning electron microscope. The chapter shows that imaging is divided into that making use of secondary electrons (SEs) and of backscattered electrons (BSEs), resulting in different contrasts in the images and thus providing information on compositions, microstructures, and surface potentials. Whenever aiming for imaging and analyses at scales of down to the angstroms range, TEM and its related techniques are appropriate tools. In many cases,more » also SEM techniques provide the access to various material properties of the individual layers, not requiring specimen preparation as time consuming as TEM techniques. Finally, the chapter dedicates to cross-sectional specimen preparation for electron microscopy. The preparation decides indeed on the quality of imaging and analyses.« less

12 CFR 205.17 - Requirements for overdraft services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... consumer agrees, electronically, which includes a statement informing the consumer of the right to revoke... explanation of the consumer's right to affirmatively consent to the financial institution's payment of... that the consumer has the right to opt into, or opt out of, the payment of overdrafts under the...

Analyzing the Environmental Impacts of Laptop Enclosures Using Screening-Level Life Cycle Assessment to Support Sustainable Consumer Electronics

EPA Science Inventory

With the ever-increasing amount of consumer electronics in service, it is essential industries and policy-makers work together to develop ways to manufacture more environmentally sustainable IT products which meet the needs of society. The objective of this study was to better un...

Electronics

DTIC Science & Technology

2001-01-01

International Acer Incorporated, Hsin Chu, Taiwan Aerospace Industrial Development Corporation, Taichung, Taiwan American Institute of Taiwan, Taipei, Taiwan...Singapore and Malaysia .5 - 4 - The largest market for semiconductor products is the high technology consumer electronics industry that consumes up...Singapore, and Malaysia . A new semiconductor facility costs around $3 billion to build and takes about two years to become operational

76 FR 22103 - The Consumer and Governmental Affairs Bureau Seeks Comment on “Need for Speed” Information for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-20

... to make informed choices among competing broadband Internet access services. According to the most... speed and performance required for the range of Internet applications consumers intend to use, and how... electronically using the Internet by accessing the Commission's Electronic Comment Filing System (ECFS): http...

American Gadgets: Cybernetics, Consumer Electronics, and Twentieth-Century US Fiction

ERIC Educational Resources Information Center

Simeone, Michael

2011-01-01

Challenging the argument that liberal humanism faces extinction in the face of ubiquitous digital technologies, my dissertation analyzes the ways in which consumer electronics reinscribe the human subject as a privileged category in the information age. Through spaces like the Matrix, Windows 7, or even the single row of play controls on a…

Extracellular enzymes facilitate electron uptake in biocorrosion and bioelectrosynthesis.

PubMed

Deutzmann, Jörg S; Sahin, Merve; Spormann, Alfred M

2015-04-21

Direct, mediator-free transfer of electrons between a microbial cell and a solid phase in its surrounding environment has been suggested to be a widespread and ecologically significant process. The high rates of microbial electron uptake observed during microbially influenced corrosion of iron [Fe(0)] and during microbial electrosynthesis have been considered support for a direct electron uptake in these microbial processes. However, the underlying molecular mechanisms of direct electron uptake are unknown. We investigated the electron uptake characteristics of the Fe(0)-corroding and electromethanogenic archaeon Methanococcus maripaludis and discovered that free, surface-associated redox enzymes, such as hydrogenases and presumably formate dehydrogenases, are sufficient to mediate an apparent direct electron uptake. In genetic and biochemical experiments, we showed that these enzymes, which are released from cells during routine culturing, catalyze the formation of H2 or formate when sorbed to an appropriate redox-active surface. These low-molecular-weight products are rapidly consumed by M. maripaludis cells when present, thereby preventing their accumulation to any appreciable or even detectable level. Rates of H2 and formate formation by cell-free spent culture medium were sufficient to explain the observed rates of methane formation from Fe(0) and cathode-derived electrons by wild-type M. maripaludis as well as by a mutant strain carrying deletions in all catabolic hydrogenases. Our data collectively show that cell-derived free enzymes can mimic direct extracellular electron transfer during Fe(0) corrosion and microbial electrosynthesis and may represent an ecologically important but so far overlooked mechanism in biological electron transfer. The intriguing trait of some microbial organisms to engage in direct electron transfer is thought to be widespread in nature. Consequently, direct uptake of electrons into microbial cells from solid surfaces is assumed to have a significant impact not only on fundamental microbial and biogeochemical processes but also on applied bioelectrochemical systems, such as microbial electrosynthesis and biocorrosion. This study provides a simple mechanistic explanation for frequently observed fast electron uptake kinetics in microbiological systems without a direct transfer: free, cell-derived enzymes can interact with cathodic surfaces and catalyze the formation of intermediates that are rapidly consumed by microbial cells. This electron transfer mechanism likely plays a significant role in various microbial electron transfer reactions in the environment. Copyright © 2015 Deutzmann et al.

Perceptions of chronically ill and healthy consumers about electronic personal health records: a comparative empirical investigation.

PubMed

Cocosila, Mihail; Archer, Norm

2014-07-23

To develop a model of consumer perceptions of electronic personal health records (PHRs) and validate it in a comparative study between consumers who report having a chronic illness and those who report being well. A model of PHR use motivators and barriers was built and tested through a national survey across Canada. Data were collected from 800 individuals, 18 years or older. Half reported having a chronic illness or disability and half reported being well. Analyses were performed with structural equation modelling techniques. A total of 389 answers from chronically ill and 383 from well participants were collected. Perceived usefulness was the key explanation of the intention to use PHRs for both ill and well people (total effect of 0.601 and 0.565, respectively) followed by security, privacy and trust in PHRs (total effect of 0.377 and 0.479, respectively). Conversely, computer anxiety was perceived as a significant barrier (total effect of -0.327 for ill individuals and -0.212 for well individuals). The model proposed was appropriate in explaining key consumer positive and negative perceptions on electronic PHR use. We found little difference in perceptions of electronic PHRs between chronically ill and well individuals, although self-reporting their health status might have influenced the results. To increase the adoption rate of electronic PHRs among both chronically ill and well consumers it is necessary to reinforce consumer perceptions of the usefulness of and trust in these eHealth technologies while mitigating their anxieties about computer use in general. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Electronic manufacturing and packaging in Japan

NASA Technical Reports Server (NTRS)

Kelly, Michael J.; Boulton, William R. (Editor); Kukowski, John A.; Meieran, Eugene S.; Pecht, Michael; Peeples, John W.; Tummala, Rao R.

1995-01-01

This report summarizes the status of electronic manufacturing and packaging technology in Japan in comparison to that in the United States, and its impact on competition in electronic manufacturing in general. In addition to electronic manufacturing technologies, the report covers technology and manufacturing infrastructure, electronics manufacturing and assembly, quality assurance and reliability in the Japanese electronics industry, and successful product realization strategies. The panel found that Japan leads the United States in almost every electronics packaging technology. Japan clearly has achieved a strategic advantage in electronics production and process technologies. Panel members believe that Japanese competitors could be leading U.S. firms by as much as a decade in some electronics process technologies. Japan has established this marked competitive advantage in electronics as a consequence of developing low-cost, high-volume consumer products. Japan's infrastructure, and the remarkable cohesiveness of vision and purpose in government and industry, are key factors in the success of Japan's electronics industry. Although Japan will continue to dominate consumer electronics in the foreseeable future, opportunities exist for the United States and other industrial countries to capture an increasingly large part of the market. The JTEC panel has identified no insurmountable barriers that would prevent the United States from regaining a significant share of the consumer electronics market; in fact, there is ample evidence that the United States needs to aggressively pursue high-volume, low-cost electronic assembly, because it is a critical path leading to high-performance electronic systems.

An Examination of the Influences on "Green" Mobile Phone Purchases among Young Business Students: An Empirical Analysis

ERIC Educational Resources Information Center

Paladino, Angela; Ng, Serena

2013-01-01

This article examines the determinants of eco-friendly electronic good consumption among students at a large Australian university who have been exposed to a marketing campaign, Mobile Muster. Empirical research generally shows younger consumers to be less concerned about the environment. Similar studies demonstrate that peer pressure has a large…

Rapid contrast evaluation method based on affinity beads and backscattered electron imaging for the screening of electron stains.

PubMed

Kaku, Hiroki; Inoue, Kanako; Muranaka, Yoshinori; Park, Pyoyun; Ikeda, Kenichi

2015-10-01

Uranyl salts are toxic and radioactive; therefore, several studies have been conducted to screen for substitutes of electron stains. In this regard, the contrast evaluation process is time consuming and the results obtained are inconsistent. In this study, we developed a novel contrast evaluation method using affinity beads and a backscattered electron image (BSEI), obtained using scanning electron microscopy. The contrast ratios of BSEI in each electron stain treatment were correlated with those of transmission electron microscopic images. The affinity beads bound to cell components independently. Protein and DNA samples were enhanced by image contrast treated with electron stains; however, this was not observed for sugars. Protein-conjugated beads showed an additive effect of image contrast when double-stained with lead. However, additive effect of double staining was not observed in DNA-conjugated beads. The varying chemical properties of oligopeptides showed differences in image contrast when treated with each electron stain. This BSEI-based evaluation method not only enables screening for alternate electron stains, but also helps analyze the underlying mechanisms of electron staining of cellular structures. © The Author 2015. Published by Oxford University Press on behalf of The Japanese Society of Microscopy. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Application of Multipurpose Cadastre to Evaluate Energy Security of Land Parcel (Case Study: Gedung A and Gedung B, Institut Teknologi Sumatra)

NASA Astrophysics Data System (ADS)

Alif, S. M.; Nugroho, A. P.; Leksono, B. E.

2018-03-01

Energy security has one of its dimensions: Short-term energy security which focuses on the ability of the energy system to react promptly to sudden changes within the supply-demand balance. Non-energy components (such as land parcel) that comprise an energy system are analysed comprehensively with other component to measure energy security related to energy supply. Multipurpose cadastre which is an integrated land information system containing legal, physical, and cultural is used to evaluate energy (electrical energy) security of land parcel. The fundamental component of multipurpose cadastre used to evaluate energy security is attribute data which is the value of land parcel facilities. Other fundamental components (geographic control data, base map data, cadastral data) are used as position information and provide weight in room (part of land parcel) valuation. High value-room means the room is comfortable and/or used productively by its occupant. The method of valuation is by comparing one facility to other facilities. Facilities included in room valuation are relatively static items (such as chair, desk, and cabinet) except lamps and other electronic devices. The room value and number of electronic devices which consume electrical energy are correlated with each other. Consumption of electrical energy of electronic devices in the room with average value remains constant while consumption in other room needs to be evaluated to save the energy. The result of this research shows that room value correlate weakly with number of electronic device in corresponding room. It shows excess energy consumed in low-value room. Although numbers of electronic devices do not always mean the consumption of electrical energy and there are plenty electronic devices, it is recommended for occupant to be careful in utilizing electronic devices in low-value room to minimize energy consumption.

77 FR 55833 - Announcement of Public Meeting on the Consumer Confidence Report (CCR) Rule Retrospective Review...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-11

... on the Consumer Confidence Report (CCR) Rule Retrospective Review and Request for Public Comment on... potential approaches for providing Consumer Confidence Reports (CCR) via electronic delivery. EPA plans to... meeting to give EPA time to process your request. Background Consumer Confidence Reports are a key part of...

Far from the Lonely Crowd: The Trenchant Techno-Cynicism of Mr. Robot.

PubMed

Volmar, Daniel

2017-12-01

Mr. Robot is a television drama with an unusually techno-cynical premise, tying cybersecurity to the contemporary malaise of social alienation and political disengagement. Weary of consumer capitalism, the show's youthful protagonists seek a more authentic sense of belonging by exploiting the vulnerability of a global economic system that depends critically on creaking technological infrastructures. A remarkable display of iconoclasm for commercial entertainment, Mr. Robot suggests rising discontentment with the commodification of friendship through consumer electronics, but it may also offer media enterprises a model for how to profit from that discontentment in the future. Copyright © 2017 Elsevier Ltd. All rights reserved.

17 CFR 248.125 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2014 CFR

2014-04-01

... electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing..., such as by calling a single toll-free telephone number. (2) Opt out methods that are not reasonable and...

17 CFR 248.125 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2013 CFR

2013-04-01

... electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing..., such as by calling a single toll-free telephone number. (2) Opt out methods that are not reasonable and...

17 CFR 248.125 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2012 CFR

2012-04-01

... electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing..., such as by calling a single toll-free telephone number. (2) Opt out methods that are not reasonable and...

17 CFR 248.125 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2010 CFR

2010-04-01

... electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing..., such as by calling a single toll-free telephone number. (2) Opt out methods that are not reasonable and...

17 CFR 248.125 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2011 CFR

2011-04-01

... electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing..., such as by calling a single toll-free telephone number. (2) Opt out methods that are not reasonable and...

12 CFR 222.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2010 CFR

2010-01-01

... electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing... by calling a single toll-free telephone number. (2) Opt-out methods that are not reasonable and...

12 CFR 222.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2014 CFR

2014-01-01

... electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing... by calling a single toll-free telephone number. (2) Opt-out methods that are not reasonable and...

12 CFR 222.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2012 CFR

2012-01-01

... electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing... by calling a single toll-free telephone number. (2) Opt-out methods that are not reasonable and...

12 CFR 222.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2013 CFR

2013-01-01

... electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing... by calling a single toll-free telephone number. (2) Opt-out methods that are not reasonable and...

12 CFR 222.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2011 CFR

2011-01-01

... electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing... by calling a single toll-free telephone number. (2) Opt-out methods that are not reasonable and...

A Study of the Intent to Fully Utilize Electronic Personal Health Records in the Context of Privacy and Trust

ERIC Educational Resources Information Center

Richards, Rhonda J.

2012-01-01

Government initiatives called for electronic health records for each individual healthcare consumer by 2014. The purpose of the initiatives is to provide for the common exchange of clinical information between healthcare consumers, healthcare providers, third-party payers and public healthcare officials. This exchange of healthcare information…

Brightness analysis of an electron beam with a complex profile

NASA Astrophysics Data System (ADS)

Maesaka, Hirokazu; Hara, Toru; Togawa, Kazuaki; Inagaki, Takahiro; Tanaka, Hitoshi

2018-05-01

We propose a novel analysis method to obtain the core bright part of an electron beam with a complex phase-space profile. This method is beneficial to evaluate the performance of simulation data of a linear accelerator (linac), such as an x-ray free electron laser (XFEL) machine, since the phase-space distribution of a linac electron beam is not simple, compared to a Gaussian beam in a synchrotron. In this analysis, the brightness of undulator radiation is calculated and the core of an electron beam is determined by maximizing the brightness. We successfully extracted core electrons from a complex beam profile of XFEL simulation data, which was not expressed by a set of slice parameters. FEL simulations showed that the FEL intensity was well remained even after extracting the core part. Consequently, the FEL performance can be estimated by this analysis without time-consuming FEL simulations.

Classification of human pathogen bacteria for early screening using electronic nose

NASA Astrophysics Data System (ADS)

Zulkifli, Syahida Amani; Mohamad, Che Wan Syarifah Robiah; Abdullah, Abu Hassan

2017-10-01

This paper present human pathogen bacteria for early screening using electronic nose. Electronic nose (E-nose) known as gas sensor array is a device that analyze the odor measurement give the fast response and less time consuming for clinical diagnosis. Many bacterial pathogens could lead to life threatening infections. Accurate and rapid diagnosis is crucial for the successful management of these infections disease. The conventional method need more time to detect the growth of bacterial. Alternatively, the bacteria are Pseudomonas aeruginosa and Shigella cultured on different media agar can be detected and classifies according to the volatile compound in shorter time using electronic nose (E-nose). Then, the data from electronic nose (E-nose) is processed using statistical method which is principal component analysis (PCA). The study shows the capability of electronic nose (E-nose) for early screening for bacterial infection in human stomach.

Microbial Electrosynthesis: Feeding Microbes Electricity To Convert Carbon Dioxide and Water to Multicarbon Extracellular Organic Compounds

PubMed Central

Nevin, Kelly P.; Woodard, Trevor L.; Franks, Ashley E.; Summers, Zarath M.; Lovley, Derek R.

2010-01-01

The possibility of providing the acetogenic microorganism Sporomusa ovata with electrons delivered directly to the cells with a graphite electrode for the reduction of carbon dioxide to organic compounds was investigated. Biofilms of S. ovata growing on graphite cathode surfaces consumed electrons with the reduction of carbon dioxide to acetate and small amounts of 2-oxobutyrate. Electrons appearing in these products accounted for over 85% of the electrons consumed. These results demonstrate that microbial production of multicarbon organic compounds from carbon dioxide and water with electricity as the energy source is feasible. PMID:20714445

The relevance of netnography to the harness of Romanian health care electronic word-of-mouth.

PubMed

Bratucu, R; Gheorghe, I R; Radu, A; Purcarea, V L

2014-09-15

Nowadays, consumers use the computer mediated communication to make purchase decisions on a large variety of products and services. Since health care services are archetypal by nature, consumers in this field are one of the most encountered users of electronic word-of-mouth. The objective of this paper is to explain and support the necessity of adopting a different qualitative method when electronic word of mouth is harnessed on health care dedicated forums, that is, netnography.

The relevance of netnography to the harness of Romanian health care electronic word-of-mouth

PubMed Central

Bratucu, R; Gheorghe, IR; Radu, A; Purcarea, VL

2014-01-01

Abstract Nowadays, consumers use the computer mediated communication to make purchase decisions on a large variety of products and services. Since health care services are archetypal by nature, consumers in this field are one of the most encountered users of electronic word-of-mouth. The objective of this paper is to explain and support the necessity of adopting a different qualitative method when electronic word of mouth is harnessed on health care dedicated forums, that is, netnography. PMID:25408755

12 CFR 222.24 - Reasonable opportunity to opt out.

Code of Federal Regulations, 2010 CFR

2010-01-01

... at an Internet Web site at which the consumer has obtained a product or service. The consumer... consumer at the time of an electronic transaction, such as a transaction conducted on an Internet Web site... one that allows consumers to indicate that they do not want to opt out. (5) By including in a privacy...

Ereaders, the iPad--Is That All There Is?

ERIC Educational Resources Information Center

Lankes, R. David

2010-01-01

The device industry is blowing a great opportunity to revolutionize reading. At the Consumer Electronics Show in January, a dozen or more ebook readers and tablets were trotted out as the wave of the future. Since then, Apple has revealed the iPad, Sony has started shipping a touchscreen version of its eBook, and Spring Design has started shipping…

Commentary: Tablet PCs--Lightweights with a Teaching Punch

ERIC Educational Resources Information Center

Parslow, Graham R.

2010-01-01

Tablet (or slate) computers are a group of small portable computers that have two features in common, a touch screen and wireless connectivity to the web. At the 2010 Consumer Electronics show held in January in Las Vegas, this category of product caused the greatest interest ahead of the release of the Apple iPad (www.cesweb.org). The tablet PC…

The influence of residents' behaviour on waste electrical and electronic equipment collection effectiveness.

PubMed

Nowakowski, Piotr

2016-11-01

Government agencies have implemented regulations to reduce the volume of waste electrical and electronic equipment to protect the environment and encourage recycling. The effectiveness of systems through which waste electrical and electronic equipment is collected and recycled depends on (a) the development and operation of new programmes to process this material and (b) on information dissemination programmes aimed at manufacturers, retail sellers, and the consuming public. This study analyses these two elements. The main focus is to better understand household residents' behaviour in regards to the proper methods of handling waste electrical and electronic equipment and possible storage of the obsolete equipment that brings disturbances with collection of the waste equipment. The study explores these issues depending on size of municipality and the household residents' knowledge about legal methods of post-consumer management of waste electrical and electronic equipment in Poland, where the collection rate of that type of waste is about 40% of the total mass of waste electrical and electronic equipment appearing in the market.The research was informed by various sources of information, including non-government organisations, Inspectorate of Environmental Protection and Central Statistics Office in Poland, questionnaires, and interviews with the household residents. The questionnaires were distributed to daytime and vocational students from different universities and the customers of an electronic equipment superstore. The results show that a resident's behaviour in regards to the handling of obsolete waste electrical and electronic equipment can significantly reduce the collection rate, especially when the waste is discarded improperly - mixed with municipal waste or sold in scrapyards. It is possible to identify points that are necessary to be improved to achieve a higher collection rate. © The Author(s) 2016.

Cobalt release from inexpensive jewellery: has the use of cobalt replaced nickel following regulatory intervention?

PubMed

Thyssen, Jacob Pontoppidan; Jellesen, Morten S; Menné, Torkil; Lidén, Carola; Julander, Anneli; Møller, Per; Johansen, Jeanne Duus

2010-08-01

Before the introduction of the EU Nickel Directive, concern was raised that manufacturers of jewellery might turn from the use of nickel to cobalt following the regulatory intervention on nickel exposure. The aim was to study 354 consumer items using the cobalt spot test. Cobalt release was assessed to obtain a risk estimate of cobalt allergy and dermatitis in consumers who would wear the jewellery. The cobalt spot test was used to assess cobalt release from all items. Microstructural characterization was made using scanning electron microscope (SEM) and energy-dispersive spectroscopy (EDS). Cobalt release was found in 4 (1.1%) of 354 items. All these had a dark appearance. SEM/EDS was performed on the four dark appearing items which showed tin-cobalt plating on these. This study showed that only a minority of inexpensive jewellery purchased in Denmark released cobalt when analysed with the cobalt spot test. As fashion trends fluctuate and we found cobalt release from dark appearing jewellery, cobalt release from consumer items should be monitored in the future. Industries may not be fully aware of the potential cobalt allergy problem.

A Literature Review of Word of Mouth and Electronic Word of Mouth: Implications for Consumer Behavior.

PubMed

Huete-Alcocer, Nuria

2017-01-01

The rise and spread of the Internet has led to the emergence of a new form of word of mouth (WOM): electronic word of mouth (eWOM), considered one of the most influential informal media among consumers, businesses, and the population at large. Drawing on these ideas, this paper reviews the relevant literature, analyzing the impact of traditional WOM and eWOM in the field of consumer behavior and highlighting the main differences between the two types of recommendations, with a view to contributing to a better understanding of the potential of both.

A Literature Review of Word of Mouth and Electronic Word of Mouth: Implications for Consumer Behavior

PubMed Central

Huete-Alcocer, Nuria

2017-01-01

The rise and spread of the Internet has led to the emergence of a new form of word of mouth (WOM): electronic word of mouth (eWOM), considered one of the most influential informal media among consumers, businesses, and the population at large. Drawing on these ideas, this paper reviews the relevant literature, analyzing the impact of traditional WOM and eWOM in the field of consumer behavior and highlighting the main differences between the two types of recommendations, with a view to contributing to a better understanding of the potential of both. PMID:28790950

77 FR 30923 - Electronic Fund Transfers (Regulation E)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-24

.... The Bureau seeks public input on the costs, and benefits, and consumer protection issues related to... interested in learning more about this product, including its costs, benefits, and risks to consumers. The... their costs, benefits, and risks to consumers. These comments, in conjunction with other outreach and...

Distress and Other Situational Factors that Influence Consumer Willingness to Provide Personal Information in an Online Buyer-Seller Exchange: An Equity Theory Perspective

ERIC Educational Resources Information Center

Barto, Thomas Peter

2011-01-01

Global electronic markets will profoundly impact commerce in the 21 st century. Brick-and-mortar retailers are using technology for electronic marketing purposes where the familiar layout of the physical store becomes a maze of pulldown menus, product indices, and search features creating a new unknown for consumers and concerns for information…

Extreme temperature packaging: challenges and opportunities

NASA Astrophysics Data System (ADS)

Johnson, R. Wayne

2016-05-01

Consumer electronics account for the majority of electronics manufactured today. Given the temperature limits of humans, consumer electronics are typically rated for operation from -40°C to +85°C. Military applications extend the range to -65°C to +125°C while underhood automotive electronics may see +150°C. With the proliferation of the Internet of Things (IoT), the goal of instrumenting (sensing, computation, transmission) to improve safety and performance in high temperature environments such as geothermal wells, nuclear reactors, combustion chambers, industrial processes, etc. requires sensors, electronics and packaging compatible with these environments. Advances in wide bandgap semiconductors (SiC and GaN) allow the fabrication of high temperature compatible sensors and electronics. Integration and packaging of these devices is required for implementation into actual applications. The basic elements of packaging are die attach, electrical interconnection and the package or housing. Consumer electronics typically use conductive adhesives or low melting point solders for die attach, wire bonds or low melting solder for electrical interconnection and epoxy for the package. These materials melt or decompose in high temperature environments. This paper examines materials and processes for high temperature packaging including liquid transient phase and sintered nanoparticle die attach, high melting point wires for wire bonding and metal and ceramic packages. The limitations of currently available solutions will also be discussed.

Recent progress in OLED and flexible displays and their potential for application to aerospace and military display systems

NASA Astrophysics Data System (ADS)

Sarma, Kalluri

2015-05-01

Organic light emitting diode (OLED) display technology has advanced significantly in recent years and it is increasingly being adapted in consumer electronics products with premium performance, such as high resolution smart phones, Tablet PCs and TVs. Even flexible OLED displays are beginning to be commercialized in consumer electronic devices such as smart phones and smart watches. In addition to the advances in OLED emitters, successful development and adoption of OLED displays for premium performance applications relies on the advances in several enabling technologies including TFT backplanes, pixel drive electronics, pixel patterning technologies, encapsulation technologies and system level engineering. In this paper we will discuss the impact of the recent advances in LTPS and AOS TFTs, R, G, B and White OLED with color filter pixel architectures, and encapsulation, on the success of the OLEDs in consumer electronic devices. We will then discuss potential of these advances in addressing the requirements of OLED and flexible displays for the military and avionics applications.

12 CFR 205.6 - Liability of consumer for unauthorized transfers.

Code of Federal Regulations, 2011 CFR

2011-01-01

... transfers. 205.6 Section 205.6 Banks and Banking FEDERAL RESERVE SYSTEM BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.6 Liability of consumer for unauthorized transfers. (a) Conditions for liability. A consumer may be held liable, within the limitations described in...

12 CFR 205.6 - Liability of consumer for unauthorized transfers.

Code of Federal Regulations, 2012 CFR

2012-01-01

... transfers. 205.6 Section 205.6 Banks and Banking FEDERAL RESERVE SYSTEM BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.6 Liability of consumer for unauthorized transfers. (a) Conditions for liability. A consumer may be held liable, within the limitations described in...

12 CFR 205.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... device means a card, code, or other means of access to a consumer's account, or any combination thereof... of the consumer's wages, salary, or other employee compensation (such as commissions), are made on a... agreement. (c) Act means the Electronic Fund Transfer Act (title IX of the Consumer Credit Protection Act...

17 CFR 160.7 - Form of opt out notice to consumers; opt out methods.

Code of Federal Regulations, 2010 CFR

2010-04-01

... consumer agrees, electronically. (2) When a customer relationship terminates, the customer's opt out... that relationship. If the individual subsequently establishes a new customer relationship with you, the... relationships. (1) If two or more consumers jointly obtain a financial product or service from you, you may...

Consumer Understanding of Nutrition Marketing Terms: A Pilot Study

ERIC Educational Resources Information Center

Haroldson, Amber; Yen, Chih-Lun

2016-01-01

The purpose of this pilot study was to examine the validity of a questionnaire developed to assess adult consumer understanding of nutrition marketing terms and the resulting impact on consumer behavior. Participants (n = 40) completed an electronic questionnaire. Efforts to establish validity and reliability suggest that the questionnaire is a…

12 CFR 205.6 - Liability of consumer for unauthorized transfers.

Code of Federal Regulations, 2014 CFR

2014-01-01

... transfers. 205.6 Section 205.6 Banks and Banking FEDERAL RESERVE SYSTEM BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.6 Liability of consumer for unauthorized transfers. (a) Conditions for liability. A consumer may be held liable, within the limitations described in...

12 CFR 205.6 - Liability of consumer for unauthorized transfers.

Code of Federal Regulations, 2010 CFR

2010-01-01

... transfers. 205.6 Section 205.6 Banks and Banking FEDERAL RESERVE SYSTEM BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.6 Liability of consumer for unauthorized transfers. (a) Conditions for liability. A consumer may be held liable, within the limitations described in...

12 CFR 205.6 - Liability of consumer for unauthorized transfers.

Code of Federal Regulations, 2013 CFR

2013-01-01

... transfers. 205.6 Section 205.6 Banks and Banking FEDERAL RESERVE SYSTEM BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM ELECTRONIC FUND TRANSFERS (REGULATION E) § 205.6 Liability of consumer for unauthorized transfers. (a) Conditions for liability. A consumer may be held liable, within the limitations described in...

Attitude of the stakeholders involved in the repair and second-hand sale of small household electrical and electronic equipment: Case study in Spain.

PubMed

Bovea, María D; Pérez-Belis, Victoria; Quemades-Beltrán, Pilar

2017-07-01

The European legal framework for Electrical and Electronic Equipment (EEE) and Waste Electrical and Electronic Equipment (WEEE) (Directive 2012/19/EU) prioritises reuse strategies against other valorisation options. Along these lines, this paper examines the awareness and perceptions of reusing small household EEE from the viewpoint of the different stakeholders involved in its end-of-life: repair centres, second-hand shops and consumers. Direct interviews were conducted in which an intended survey, designed specifically for each stakeholder, was answered by a representative sample of each one. The results obtained from repair centres show that small household EEE are rarely repaired, except for minor repairs such as replacing cables, and that heaters, toasters and vacuum cleaners were those most frequently repaired. The difficulty of accessing cheap spare parts or difficulties during the disassembly process are the commonest problems observed by repair technicians. The results obtained from second-hand shops show that irons, vacuum cleaners and heaters are the small household EEE that are mainly received and sold. The results according to consumers indicate that 9.6% of them take their small household EEE to be repaired, while less than 1% has ever bought a second-hand small household EEE. The main arguments for this attitude are they thought that the repair cost would be similar to the price of a new one (for repairs), and hygiene and cleaning reasons (for second-hand sales). Copyright © 2017 Elsevier Ltd. All rights reserved.

Study of Electron Swarm in High Pressure Hydrogen Gas Filled RF Cavities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yonehara, K.; Chung, M.; Jansson, A.

2010-05-01

A high pressure hydrogen gas filled RF cavity has been proposed for use in the muon collection system for a muon collider. It allows for high electric field gradients in RF cavities located in strong magnetic fields, a condition frequently encountered in a muon cooling channel. In addition, an intense muon beam will generate an electron swarm via the ionization process in the cavity. A large amount of RF power will be consumed into the swarm. We show the results from our studies of the HV RF breakdown in a cavity without a beam and present some results on themore » resulting electron swarm dynamics. This is preliminary to actual beam tests which will take place late in 2010.« less

Fraction of Electrons Consumed in Electron Acceptor Reduction and Hydrogen Thresholds as Indicators of Halorespiratory Physiology

PubMed Central

Löffler, Frank E.; Tiedje, James M.; Sanford, Robert A.

1999-01-01

Measurements of the hydrogen consumption threshold and the tracking of electrons transferred to the chlorinated electron acceptor (fe) reliably detected chlororespiratory physiology in both mixed cultures and pure cultures capable of using tetrachloroethene, cis-1,2-dichloroethene, vinyl chloride, 2-chlorophenol, 3-chlorobenzoate, 3-chloro-4-hydroxybenzoate, or 1,2-dichloropropane as an electron acceptor. Hydrogen was consumed to significantly lower threshold concentrations of less than 0.4 ppmv compared with the values obtained for the same cultures without a chlorinated compound as an electron acceptor. The fe values ranged from 0.63 to 0.7, values which are in good agreement with theoretical calculations based on the thermodynamics of reductive dechlorination as the terminal electron-accepting process. In contrast, a mixed methanogenic culture that cometabolized 3-chlorophenol exhibited a significantly lower fe value, 0.012. PMID:10473415

Stretchable, Twisted Conductive Microtubules for Wearable Computing, Robotics, Electronics, and Healthcare.

PubMed

Do, Thanh Nho; Visell, Yon

2017-05-11

Stretchable and flexible multifunctional electronic components, including sensors and actuators, have received increasing attention in robotics, electronics, wearable, and healthcare applications. Despite advances, it has remained challenging to design analogs of many electronic components to be highly stretchable, to be efficient to fabricate, and to provide control over electronic performance. Here, we describe highly elastic sensors and interconnects formed from thin, twisted conductive microtubules. These devices consist of twisted assemblies of thin, highly stretchable (>400%) elastomer tubules filled with liquid conductor (eutectic gallium indium, EGaIn), and fabricated using a simple roller coating process. As we demonstrate, these devices can operate as multimodal sensors for strain, rotation, contact force, or contact location. We also show that, through twisting, it is possible to control their mechanical performance and electronic sensitivity. In extensive experiments, we have evaluated the capabilities of these devices, and have prototyped an array of applications in several domains of stretchable and wearable electronics. These devices provide a novel, low cost solution for high performance stretchable electronics with broad applications in industry, healthcare, and consumer electronics, to emerging product categories of high potential economic and societal significance.

12 CFR 717.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2011 CFR

2011-01-01

... an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing consumers to... single toll-free telephone number. (2) Opt-out methods that are not reasonable and simple. Reasonable and...

12 CFR 717.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2012 CFR

2012-01-01

... an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing consumers to... single toll-free telephone number. (2) Opt-out methods that are not reasonable and simple. Reasonable and...

12 CFR 717.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2013 CFR

2013-01-01

... an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing consumers to... single toll-free telephone number. (2) Opt-out methods that are not reasonable and simple. Reasonable and...

12 CFR 717.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2014 CFR

2014-01-01

... an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing consumers to... single toll-free telephone number. (2) Opt-out methods that are not reasonable and simple. Reasonable and...

12 CFR 717.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2010 CFR

2010-01-01

... an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing consumers to... single toll-free telephone number. (2) Opt-out methods that are not reasonable and simple. Reasonable and...

Consumers' Perceptions of Patient-Accessible Electronic Medical Records

PubMed Central

Vaughon, Wendy L; Czaja, Sara J; Levy, Joslyn; Rockoff, Maxine L

2013-01-01

Background Electronic health information (eHealth) tools for patients, including patient-accessible electronic medical records (patient portals), are proliferating in health care delivery systems nationally. However, there has been very limited study of the perceived utility and functionality of portals, as well as limited assessment of these systems by vulnerable (low education level, racial/ethnic minority) consumers. Objective The objective of the study was to identify vulnerable consumers’ response to patient portals, their perceived utility and value, as well as their reactions to specific portal functions. Methods This qualitative study used 4 focus groups with 28 low education level, English-speaking consumers in June and July 2010, in New York City. Results Participants included 10 males and 18 females, ranging in age from 21-63 years; 19 non-Hispanic black, 7 Hispanic, 1 non-Hispanic White and 1 Other. None of the participants had higher than a high school level education, and 13 had less than a high school education. All participants had experience with computers and 26 used the Internet. Major themes were enhanced consumer engagement/patient empowerment, extending the doctor’s visit/enhancing communication with health care providers, literacy and health literacy factors, improved prevention and health maintenance, and privacy and security concerns. Consumers were also asked to comment on a number of key portal features. Consumers were most positive about features that increased convenience, such as making appointments and refilling prescriptions. Consumers raised concerns about a number of potential barriers to usage, such as complex language, complex visual layouts, and poor usability features. Conclusions Most consumers were enthusiastic about patient portals and perceived that they had great utility and value. Study findings suggest that for patient portals to be effective for all consumers, portals must be designed to be easy to read, visually engaging, and have user-friendly navigation. PMID:23978618

Electronic waste recovery in Finland: Consumers' perceptions towards recycling and re-use of mobile phones.

PubMed

Ylä-Mella, Jenni; Keiski, Riitta L; Pongrácz, Eva

2015-11-01

This paper examines consumers' awareness and perceptions towards mobile phone recycling and re-use. The results are based on a survey conducted in the city of Oulu, Finland, and analysed in the theoretical framework based on the theories of planned behaviour (TPB) and value-belief-norm (VBN). The findings indicate that consumers' awareness of the importance and existence of waste recovery system is high; however, awareness has not translated to recycling behaviour. The survey reveals that 55% of respondents have two or more unused mobile phones at homes. The more phones stored at homes, the more often reasons 'I don't know where to return' and/or 'have not got to do it yet' were mentioned. This indicates that proximity and the convenience of current waste management system are inadequate in promoting the return of small waste electrical and electronic equipment (WEEE). To facilitate re-use, and the highest level of recovery, consumers will need to be committed to return end-of-use electronics to WEEE collection centres without delays. Further, the supply and demand of refurbished mobile phones do not meet at this moment in Finland due to consumer's storing habits versus expectations of recent features under guarantee and unrealistic low prizes. The study also points out that, in order to change current storing habits of consumers, there is an explicit need for more information and awareness on mobile phone collection in Finland, especially on regarding retailers' take-back. Copyright © 2015 Elsevier Ltd. All rights reserved.

Microtechnology management considering test and cost aspects for stacked 3D ICs with MEMS

NASA Astrophysics Data System (ADS)

Hahn, K.; Wahl, M.; Busch, R.; Grünewald, A.; Brück, R.

2018-01-01

Innovative automotive systems require complex semiconductor devices currently only available in consumer grade quality. The European project TRACE will develop and demonstrate methods, processes, and tools to facilitate usage of Consumer Electronics (CE) components to be deployable more rapidly in the life-critical automotive domain. Consumer electronics increasingly use heterogeneous system integration methods and "More than Moore" technologies, which are capable to combine different circuit domains (Analog, Digital, RF, MEMS) and which are integrated within SiP or 3D stacks. Making these technologies or at least some of the process steps available under automotive electronics requirements is an important goal to keep pace with the growing demand for information processing within cars. The approach presented in this paper aims at a technology management and recommendation system that covers technology data, functional and non-functional constraints, and application scenarios, and that will comprehend test planning and cost consideration capabilities.

[The stakes of online gambling in Canada: a public health analysis].

PubMed

Papineau, Elisabeth; Leblond, Jean

2011-01-01

Available data show that online gamblers spend more money and dedicate more time to playing compared to gamblers who do not play online, and are more likely to experience gambling problems. Among online players, young people and poker players show higher rates of gambling problems. These observations can be explained in part by such dangerous aspects of online gambling (and also electronic gaming machines) as: immediate and convenient accessibility; ability to pay electronically and to play on credit; anonymity; and the possibility for players to consume alcohol or other drugs while playing. These are elements that could facilitate the development or the intensification of problem gambling. This being said, the public discourse about the inevitability of legalized online gambling is quite unanimous and built upon such arguments as: the imperative duty of the state to protect the population against the dangers of the online gambling black market; and the fact that the medium in itself provides excellent consumer safeguards. A growing number of legislators are following the trend and choosing to establish state control over online gambling. We present some epidemiological and analytical data that challenge some of these assertions and decisions. We recommend a better integration of public health arguments into the commercialization and marketing of online gambling.

12 CFR 41.24 - Reasonable opportunity to opt out.

Code of Federal Regulations, 2010 CFR

2010-01-01

... electronically to the consumer, such as by posting the notice at an Internet Web site at which the consumer has... a transaction conducted on an Internet Web site. The consumer is required to decide, as a necessary.... (5) By including in a privacy notice. The opt-out notice is included in a Gramm-Leach-Bliley Act...

12 CFR 571.24 - Reasonable opportunity to opt out.

Code of Federal Regulations, 2010 CFR

2010-01-01

... electronically to the consumer, such as by posting the notice at an Internet Web site at which the consumer has... a transaction conducted on an Internet Web site. The consumer is required to decide, as a necessary.... (5) By including in a privacy notice. The opt-out notice is included in a Gramm-Leach-Bliley Act...

12 CFR 717.24 - Reasonable opportunity to opt out.

Code of Federal Regulations, 2010 CFR

2010-01-01

... electronically to the consumer, such as by posting the notice at an Internet Web site at which the consumer has... a transaction conducted on an Internet Web site. The consumer is required to decide, as a necessary.... (5) By including in a privacy notice. The opt-out notice is included in a Gramm-Leach-Bliley Act...

77 FR 40459 - Electronic Fund Transfers (Regulation E); Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-10

... Electronic Fund Transfers (Regulation E); Correction AGENCY: Bureau of Consumer Financial Protection. ACTION... published the Final Rule (77 FR 6194), which implements the Electronic Fund Transfer Act, and the official... Sec. 1005.3(a) in the interim final rule, Electronic Fund Transfers (Regulation E), published on...

Assessing consumption of bioactive micro-particles by filter-feeding Asian carp

USGS Publications Warehouse

Jensen, Nathan R.; Amberg, Jon J.; Luoma, James A.; Walleser, Liza R.; Gaikowski, Mark P.

2012-01-01

Silver carp Hypophthalmichthys molitrix (SVC) and bighead carp H. nobilis (BHC) have impacted waters in the US since their escape. Current chemical controls for aquatic nuisance species are non-selective. Development of a bioactive micro-particle that exploits filter-feeding habits of SVC or BHC could result in a new control tool. It is not fully understood if SVC or BHC will consume bioactive micro-particles. Two discrete trials were performed to: 1) evaluate if SVC and BHC consume the candidate micro-particle formulation; 2) determine what size they consume; 3) establish methods to evaluate consumption of filter-feeders for future experiments. Both SVC and BHC were exposed to small (50-100 μm) and large (150-200 μm) micro-particles in two 24-h trials. Particles in water were counted electronically and manually (microscopy). Particles on gill rakers were counted manually and intestinal tracts inspected for the presence of micro-particles. In Trial 1, both manual and electronic count data confirmed reductions of both size particles; SVC appeared to remove more small particles than large; more BHC consumed particles; SVC had fewer overall particles in their gill rakers than BHC. In Trial 2, electronic counts confirmed reductions of both size particles; both SVC and BHC consumed particles, yet more SVC consumed micro-particles compared to BHC. Of the fish that ate micro-particles, SVC consumed more than BHC. It is recommended to use multiple metrics to assess consumption of candidate micro-particles by filter-feeders when attempting to distinguish differential particle consumption. This study has implications for developing micro-particles for species-specific delivery of bioactive controls to help fisheries, provides some methods for further experiments with bioactive micro-particles, and may also have applications in aquaculture.

12 CFR 609.950 - Electronic communications.

Code of Federal Regulations, 2012 CFR

2012-01-01

... with E-SIGN, System institutions may communicate electronically in business, consumer, or commercial transactions. E-commerce transactions require the agreement of all parties when you do business. (b....950 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM ELECTRONIC COMMERCE General...

12 CFR 609.950 - Electronic communications.

Code of Federal Regulations, 2014 CFR

2014-01-01

... with E-SIGN, System institutions may communicate electronically in business, consumer, or commercial transactions. E-commerce transactions require the agreement of all parties when you do business. (b....950 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM ELECTRONIC COMMERCE General...

12 CFR 609.950 - Electronic communications.

Code of Federal Regulations, 2011 CFR

2011-01-01

... with E-SIGN, System institutions may communicate electronically in business, consumer, or commercial transactions. E-commerce transactions require the agreement of all parties when you do business. (b....950 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM ELECTRONIC COMMERCE General...

12 CFR 609.950 - Electronic communications.

Code of Federal Regulations, 2010 CFR

2010-01-01

... with E-SIGN, System institutions may communicate electronically in business, consumer, or commercial transactions. E-commerce transactions require the agreement of all parties when you do business. (b....950 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM ELECTRONIC COMMERCE General...

12 CFR 609.950 - Electronic communications.

Code of Federal Regulations, 2013 CFR

2013-01-01

... with E-SIGN, System institutions may communicate electronically in business, consumer, or commercial transactions. E-commerce transactions require the agreement of all parties when you do business. (b....950 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM ELECTRONIC COMMERCE General...

Gunshot identification system by integration of open source consumer electronics

NASA Astrophysics Data System (ADS)

López R., Juan Manuel; Marulanda B., Jose Ignacio

2014-05-01

This work presents a prototype of low-cost gunshots identification system that uses consumer electronics in order to ensure the existence of gunshots and then classify it according to a previously established database. The implementation of this tool in the urban areas is to set records that support the forensics, hence improving law enforcement also on developing countries. An analysis of its effectiveness is presented in comparison with theoretical results obtained with numerical simulations.

Critical Review of Commercial Secondary Lithium-Ion Battery Safety Standards

NASA Astrophysics Data System (ADS)

Jones, Harry P.; Chapin, Thomas, J.; Tabaddor, Mahmod

2010-09-01

The development of Li-ion cells with greater energy density has lead to safety concerns that must be carefully assessed as Li-ion cells power a wide range of products from consumer electronics to electric vehicles to space applications. Documented field failures and product recalls for Li-ion cells, mostly for consumer electronic products, highlight the risk of fire, smoke, and even explosion. These failures have been attributed to the occurrence of internal short circuits and the subsequent thermal runaway that can lead to fire and explosion. As packaging for some applications include a large number of cells, the risk of failure is likely to be magnified. To address concerns about the safety of battery powered products, safety standards have been developed. This paper provides a review of various international safety standards specific to lithium-ion cells. This paper shows that though the standards are harmonized on a host of abuse conditions, most lack a test simulating internal short circuits. This paper describes some efforts to introduce internal short circuit tests into safety standards.

Recycling Pricing and Coordination of WEEE Dual-Channel Closed-Loop Supply Chain Considering Consumers' Bargaining.

PubMed

Zhu, Xiaodong; Wang, Jing; Tang, Juan

2017-12-15

Environmentally friendly handling and efficient recycling of waste electrical on Waste Electrical and Electronic Equipment (WEEE) have grown to be a global social problem. As holders of WEEE, consumers have a significant effect on the recycling process. A consideration of and attention to the influence of consumer behavior in the recycling process can help achieve more effective recycling of WEEE. In this paper, we built a dual-channel closed-loop supply chain model composed of manufacturers, retailers, and network recycling platforms. Based on the influence of customer bargaining behavior, we studied several different scenarios of centralized decision-making, decentralized decision-making, and contract coordination, using the Stackelberg game theory. The results show that retailers and network recycling platforms will reduce the direct recovery prices to maintain their own profit when considering the impact of consumer bargaining behavior, while remanufacturers will improve the transfer payment price for surrendering part of the profit under revenue and the expense sharing contract. Using this contract, we can achieve supply chain coordination and eliminate the effect of consumer bargaining behavior on supply chain performance. It can be viewed from the parameter sensitivity analysis that when we select the appropriate sharing coefficient, the closed-loop supply chain can achieve the same system performance under a centralized decision.

National Skills Standards Development Program: Organization and Operation of Technical Committees To Develop National Skill Standards for Competency in the Electronics Industry. The Third Party Summative Evaluation of the Electronic Industries Foundation Project. Phase I & II. Final Report.

ERIC Educational Resources Information Center

Losh, Charles

The Electronics Industries Foundation was awarded a project to develop national entry-level standards and a certification system. Ten specialties were included: automotive electronics, avionics, biomedical electronics, business machines, consumer products electronics, general electronics, industrial electronics, instrumentation, microcomputer, and…

Production and Consumption of Hydrogen in Hot Spring Microbial Mats Dominated by a Filamentous Anoxygenic Photosynthetic Bacterium

PubMed Central

Otaki, Hiroyo; Everroad, R. Craig; Matsuura, Katsumi; Haruta, Shin

2012-01-01

Microbial mats containing the filamentous anoxygenic photosynthetic bacterium Chloroflexus aggregans develop at Nakabusa hot spring in Japan. Under anaerobic conditions in these mats, interspecies interaction between sulfate-reducing bacteria as sulfide producers and C. aggregans as a sulfide consumer has been proposed to constitute a sulfur cycle; however, the electron donor utilized for microbial sulfide production at Nakabusa remains to be identified. In order to determine this electron donor and its source, ex situ experimental incubation of mats was explored. In the presence of molybdate, which inhibits biological sulfate reduction, hydrogen gas was released from mat samples, indicating that this hydrogen is normally consumed as an electron donor by sulfate-reducing bacteria. Hydrogen production decreased under illumination, indicating that C. aggregans also functions as a hydrogen consumer. Small amounts of hydrogen may have also been consumed for sulfur reduction. Clone library analysis of 16S rRNA genes amplified from the mats indicated the existence of several species of hydrogen-producing fermentative bacteria. Among them, the most dominant fermenter, Fervidobacterium sp., was successfully isolated. This isolate produced hydrogen through the fermentation of organic carbon. Dispersion of microbial cells in the mats resulted in hydrogen production without the addition of molybdate, suggesting that simultaneous production and consumption of hydrogen in the mats requires dense packing of cells. We propose a cyclic electron flow within the microbial mats, i.e., electron flow occurs through three elements: S (elemental sulfur, sulfide, sulfate), C (carbon dioxide, organic carbon) and H (di-hydrogen, protons). PMID:22446313

Climate change (elevated CO₂, elevated temperature and moderate drought) triggers the antioxidant enzymes' response of grapevine cv. Tempranillo, avoiding oxidative damage.

PubMed

Salazar-Parra, Carolina; Aguirreolea, Jone; Sánchez-Díaz, Manuel; Irigoyen, Juan José; Morales, Fermín

2012-02-01

Photosynthetic carbon fixation (A(N) ) and photosynthetic electron transport rate (ETR) are affected by different environmental stress factors, such as those associated with climate change. Under stress conditions, it can be generated an electron excess that cannot be consumed, which can react with O₂, producing reactive oxygen species. This work was aimed to evaluate the influence of climate change (elevated CO₂, elevated temperature and moderate drought) on the antioxidant status of grapevine (Vitis vinifera) cv. Tempranillo leaves, from veraison to ripeness. The lowest ratios between electrons generated (ETR) and consumed (A(N) + respiration + photorespiration) were observed in plants treated with elevated CO₂ and elevated temperature. In partially irrigated plants under current ambient conditions, electrons not consumed seemed to be diverted to alternative ways. Oxidative damage to chlorophylls and carotenoids was not observed. However, these plants had increases in thiobarbituric acid reacting substances, an indication of lipid peroxidation. These increases matched well with an early rise of H₂O₂ and antioxidant enzyme activities, superoxide dismutase (EC 1.15.1.1), ascorbate peroxidase (EC 1.11.1.11) and catalase (EC 1.11.1.6). Enzymatic activities were maintained high until ripeness. In conclusion, plants grown under current ambient conditions and moderate drought were less efficient to cope with oxidative damage than well-irrigated plants, and more interestingly, plants grown under moderate drought but treated with elevated CO₂ and elevated temperature were not affected by oxidative damage, mainly because of higher rates of electrons consumed in photosynthetic carbon fixation. Copyright © Physiologia Plantarum 2011.

Sweetener blend optimization by using mixture design methodology and the electronic tongue.

PubMed

Waldrop, Megan E; Ross, Carolyn F

2014-09-01

Utilizing more than one sweetener has been shown to be an effective way to substitute sucrose in food products. The objective of this study was to apply the augmented simplex-centroid mixture design for the optimization of acceptable sweetener blends using coconut sugar, agave, and stevia. Sweetener blends were evaluated in aqueous solutions and gluten-free granola bars by a trained panel and consumers (n = 60). Significant differences were found between sweetener mixtures in solutions by both panelists and consumers (P < 0.05). Taste profiles for the sweetener solutions were also generated using the electronic tongue. Most consumer and trained intensity ratings were highly correlated (R(2) ≥ 0.79) with the electronic tongue taste profile analysis. Granola bars were also found to be significantly different (P < 0.05), with consumers preferring coconut sugar mixtures. Using contour plots and desirability function analysis, an optimal sweetener combination was found for a granola bar formulation of 89.9% coconut sugar, 6.1% agave, and 4% stevia. These results indicate that a mixture design can be a reliable way to develop new sweetener blends for product development. © 2014 Institute of Food Technologists®

Consumers' Use of Personal Electronic Devices in the Kitchen.

PubMed

Lando, Amy M; Bazaco, Michael C; Chen, Yi

2018-02-23

Smartphones, tablets, and other personal electronic devices have become ubiquitous in Americans' daily lives. These devices are used by people throughout the day, including while preparing food. For example, a device may be used to look at recipes and therefore be touched multiple times during food preparation. Previous research has indicated that cell phones can harbor bacteria, including opportunistic human pathogens such as Staphylococcus and Klebsiella spp. This investigation was conducted with data from the 2016 Food Safety Survey (FSS) and from subsequent focus groups to determine the frequency with which consumers use personal electronic devices in the kitchen while preparing food, the types of devices used, and hand washing behaviors after handling these devices. The 2016 FSS is the seventh wave of a repeated cross-sectional survey conducted by the U.S. Food and Drug Administration in collaboration with the U.S. Department of Agriculture. The goal of the FSS is to evaluate U.S. adult consumer attitudes, behaviors, and knowledge about food safety. The FSS included 4,169 adults that were contacted using a dual-frame (land line and cell phone interviews) random-digit-dial sampling process. The personal electronics module was the first of three food safety topics discussed by each of eight consumer focus groups, which were convened in four U.S. cities in fall 2016. Results from the 2016 FSS revealed that of those individuals who use personal electronic devices while cooking, only about one third reported washing hands after touching the device and before continuing cooking. This proportion is significantly lower than that for self-reported hand washing behaviors after touching risky food products such as raw eggs, meat, chicken, or fish. Results from the focus groups highlight the varied usage of these devices during food preparation and the related strategies consumers are using to incorporate personal electric devices into their cooking routines.

E-commerce application study and complementary services in the sector of laboratory diagnostics based on consumers' opinion.

PubMed

Kontis, Alexios-Patapios; Siassiakos, Konstantinos; Kaimakamis, Georgios; Lazakidou, Athina

2010-01-01

The field of the Laboratory Diagnostics (in vitro), a sector of the field of health services, constitutes an industrial market that includes activities of research, development, production and products distribution that are designated for laboratory use. These products are defined as techno-medical products including various categories of products such as simple medicines, advanced technological systems, etc. Despite the high performance, the enlargement and the increasing trends of the field, it is not recorded the expected progress in the methods and the ways of promotion, trading and supporting of these products in the market. The present paper aims at the investigation of the consumers' opinion and the specification of those services that are possible to be implemented in electronic services and commerce for a strongly competitive advantage for the enterprises of the sector. The analysis of the findings from the Consumer Purchase Decision Centres (CPDC) shows how important it is to implement web-based applications in the proposed services.

Health Data Sharing Preferences of Consumers: Public Policy and Legal Implications of Consumer-Mediated Data Management

ERIC Educational Resources Information Center

Moon, Lisa A.

2017-01-01

An individual's choice to share or have control of the sharing or withholding of their personal health information is one of the most significant public policy challenges associated with electronic information exchange. There were four aims of this study. First, to describe predictors of health data sharing preferences of consumers. Second, to…

Decomposed multidimensional control grid interpolation for common consumer electronic image processing applications

NASA Astrophysics Data System (ADS)

Zwart, Christine M.; Venkatesan, Ragav; Frakes, David H.

2012-10-01

Interpolation is an essential and broadly employed function of signal processing. Accordingly, considerable development has focused on advancing interpolation algorithms toward optimal accuracy. Such development has motivated a clear shift in the state-of-the art from classical interpolation to more intelligent and resourceful approaches, registration-based interpolation for example. As a natural result, many of the most accurate current algorithms are highly complex, specific, and computationally demanding. However, the diverse hardware destinations for interpolation algorithms present unique constraints that often preclude use of the most accurate available options. For example, while computationally demanding interpolators may be suitable for highly equipped image processing platforms (e.g., computer workstations and clusters), only more efficient interpolators may be practical for less well equipped platforms (e.g., smartphones and tablet computers). The latter examples of consumer electronics present a design tradeoff in this regard: high accuracy interpolation benefits the consumer experience but computing capabilities are limited. It follows that interpolators with favorable combinations of accuracy and efficiency are of great practical value to the consumer electronics industry. We address multidimensional interpolation-based image processing problems that are common to consumer electronic devices through a decomposition approach. The multidimensional problems are first broken down into multiple, independent, one-dimensional (1-D) interpolation steps that are then executed with a newly modified registration-based one-dimensional control grid interpolator. The proposed approach, decomposed multidimensional control grid interpolation (DMCGI), combines the accuracy of registration-based interpolation with the simplicity, flexibility, and computational efficiency of a 1-D interpolation framework. Results demonstrate that DMCGI provides improved interpolation accuracy (and other benefits) in image resizing, color sample demosaicing, and video deinterlacing applications, at a computational cost that is manageable or reduced in comparison to popular alternatives.

12 CFR 343.20 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND STATEMENTS OF GENERAL POLICY CONSUMER...)(10)). (d) Consumer means an individual who purchases, applies to purchase, or is solicited to... attempt to control the behavior of another person. (g) Electronic media includes any means for...

77 FR 18795 - Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-28

... collected through qualitative evaluation methods will increase the Bureau's understanding of consumers... following methods: Electronic: http://www.regulations.gov . Follow the instructions for submitting comments... directs the Bureau to research, analyze, and report on consumer awareness and understanding of, and...

A qualitative study of Australians' opinions about personally controlled electronic health records.

PubMed

Lehnbom, Elin C; McLachlan, Andrew; Brien, Jo-Anne E

2012-01-01

A personally controlled electronic health record (PCEHR) system is being implemented in Australia. Every Australian that wants a PCEHR will be able to opt-in from July 2012. To explore the opinions of Australian consumers and healthcare providers about the PCEHR. In this qualitative study, consumers and healthcare providers were interviewed using a semi-structured interview guide. Perceived benefits identified by participants regarding the PCEHR included instant access to clinical information, and safer and more efficient healthcare delivery. The risk of unauthorised access and breaches of privacy were some of the perceived drawbacks. Although consumers seemed unwilling to opt-in to have a PCEHR, the vast majority of healthcare providers were positive towards this development and predicted better and safer healthcare as a result. Consumers and healthcare providers appeared uniformed about the imminent PCEHR. The wide-spread unwillingness among participants to opt-in to have a PCEHR could potentially jeopardise successful implementation and uptake of this system. A well-designed system without security glitches and with individualised information from trusted healthcare providers regarding the benefits of having a PCEHR appears critical in engaging consumer opt-in.

Proton gradient regulation 5 supports linear electron flow to oxidize photosystem I.

PubMed

Takagi, Daisuke; Miyake, Chikahiro

2018-03-31

In higher plants, light drives the linear photosynthetic electron transport reaction from H 2 O to electron sinks, which is called as linear electron flow (LEF). LEF activity should be regulated depending on electron sinks; otherwise excess electrons accumulate in the thylakoid membranes and stimulate reactive oxygen species (ROS) production in photosystem I (PSI), which causes oxidative damage to PSI. To prevent ROS production in PSI, PSI should be oxidized during photosynthesis, and PROTON GRADIENT REGULATION 5 (PGR5) and PGR like 1 (PGRL1) are important to oxidized PSI. PGR5 and PGRL1 are recognized as a component of ferredoxin-dependent cyclic electron flow around PSI (Fd-CEF-PSI), however there is no direct evidence for the significant operation of Fd-CEF-PSI during photosynthesis in wild-type (WT) plants. Thus, electron distribution by PGR5 and PGRL1 between Fd-CEF-PSI and LEF is still elusive. Here, we show direct evidence that Fd-CEF-PSI activity is minor during steady state photosynthesis by measuring the Fd redox state in vivo in Arabidopsis thaliana. We found that Fd oxidation rate is determined by LEF activity during steady state photosynthesis in WT. On the other hand, pgr5 and pgrl1 showed lower electron transport efficiency from PSI to electron sinks through Fd during steady state photosynthesis. These results demonstrate that electrons are exclusively consumed in electron sinks through Fd, and the phenotypes of pgr5 and pgrl1 are likely caused by the disturbance of the LEF between PSI and electron sinks. We suggest that PGR5 and PGRL1 modulate the LEF according to electron sink activities around PSI. This article is protected by copyright. All rights reserved.

Degradation of edible oil during food processing by ultrasound: electron paramagnetic resonance, physicochemical, and sensory appreciation.

PubMed

Pingret, Daniella; Durand, Grégory; Fabiano-Tixier, Anne-Sylvie; Rockenbauer, Antal; Ginies, Christian; Chemat, Farid

2012-08-08

During ultrasound processing of lipid-containing food, some off-flavors can be detected, which can incite depreciation by consumers. The impacts of ultrasound treatment on sunflower oil using two different ultrasound horns (titanium and pyrex) were evaluated. An electron paramagnetic resonance study was performed to identify and quantify the formed radicals, along with the assessment of classical physicochemical parameters such as peroxide value, acid value, anisidine value, conjugated dienes, polar compounds, water content, polymer quantification, fatty acid composition, and volatiles profile. The study shows an increase of formed radicals in sonicated oils, as well as the modification of physicochemical parameters evidencing an oxidation of treated oils.

Nanoscale amorphization of GeTe nanowire with conductive atomic force microscope.

PubMed

Kim, JunHo

2014-10-01

We fabricated GeTe nanowires by using Au catalysis mediated vapor-liquid-solid method. The fabricated nanowires were confirmed by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. For a nanowire with - 150 nm diameter, we performed amorphization experiment with conductive atomic force microscope. We examined the structural change of the nanowire with several bias voltages from 0 V to 10 V. Above bias voltage of 6-7 V, some points of the nanowire showed transition to amorphous phase. The consumed energy for the amorphization was estimated to be 4-5 nJ, which was close to the other result of nanowire tested with a four probe device.

The application of similar image retrieval in electronic commerce.

PubMed

Hu, YuPing; Yin, Hua; Han, Dezhi; Yu, Fei

2014-01-01

Traditional online shopping platform (OSP), which searches product information by keywords, faces three problems: indirect search mode, large search space, and inaccuracy in search results. For solving these problems, we discuss and research the application of similar image retrieval in electronic commerce. Aiming at improving the network customers' experience and providing merchants with the accuracy of advertising, we design a reasonable and extensive electronic commerce application system, which includes three subsystems: image search display subsystem, image search subsystem, and product information collecting subsystem. This system can provide seamless connection between information platform and OSP, on which consumers can automatically and directly search similar images according to the pictures from information platform. At the same time, it can be used to provide accuracy of internet marketing for enterprises. The experiment shows the efficiency of constructing the system.

The Application of Similar Image Retrieval in Electronic Commerce

PubMed Central

Hu, YuPing; Yin, Hua; Han, Dezhi; Yu, Fei

2014-01-01

Traditional online shopping platform (OSP), which searches product information by keywords, faces three problems: indirect search mode, large search space, and inaccuracy in search results. For solving these problems, we discuss and research the application of similar image retrieval in electronic commerce. Aiming at improving the network customers' experience and providing merchants with the accuracy of advertising, we design a reasonable and extensive electronic commerce application system, which includes three subsystems: image search display subsystem, image search subsystem, and product information collecting subsystem. This system can provide seamless connection between information platform and OSP, on which consumers can automatically and directly search similar images according to the pictures from information platform. At the same time, it can be used to provide accuracy of internet marketing for enterprises. The experiment shows the efficiency of constructing the system. PMID:24883411

Comparison of consumers’ views on electronic data sharing for healthcare and research

PubMed Central

Joseph, Jill G; Ohno-Machado, Lucila

2015-01-01

New models of healthcare delivery such as accountable care organizations and patient-centered medical homes seek to improve quality, access, and cost. They rely on a robust, secure technology infrastructure provided by health information exchanges (HIEs) and distributed research networks and the willingness of patients to share their data. There are few large, in-depth studies of US consumers’ views on privacy, security, and consent in electronic data sharing for healthcare and research together. Objective This paper addresses this gap, reporting on a survey which asks about California consumers’ views of data sharing for healthcare and research together. Materials and Methods The survey conducted was a representative, random-digit dial telephone survey of 800 Californians, performed in Spanish and English. Results There is a great deal of concern that HIEs will worsen privacy (40.3%) and security (42.5%). Consumers are in favor of electronic data sharing but elements of transparency are important: individual control, who has access, and the purpose for use of data. Respondents were more likely to agree to share deidentified information for research than to share identified information for healthcare (76.2% vs 57.3%, p < .001). Discussion While consumers show willingness to share health information electronically, they value individual control and privacy. Responsiveness to these needs, rather than mere reliance on Health Insurance Portability and Accountability Act (HIPAA), may improve support of data networks. Conclusion Responsiveness to the public’s concerns regarding their health information is a pre-requisite for patient-centeredness. This is one of the first in-depth studies of attitudes about electronic data sharing that compares attitudes of the same individual towards healthcare and research. PMID:25829461

Sensors As Tools for Quantitation, Nanotoxicity and Nanomonitoring Assessment of Engineered Nanomaterials

EPA Science Inventory

The discovery of fullerenes in 1985 has ushered in an explosive growth in the applications of engineered nanomaterials and consumer products. Nanotechnology and engineered nanomaterials (ENMs) are being incorporated into a range of commercial products such as consumer electronic...

12 CFR 536.20 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY CONSUMER PROTECTION IN SALES OF INSURANCE...)(10)). Consumer means an individual who purchases, applies to purchase, or is solicited to purchase... attempt to control the behavior of another person. Electronic media includes any means for transmitting...

Extracellular Enzymes Facilitate Electron Uptake in Biocorrosion and Bioelectrosynthesis

PubMed Central

Deutzmann, Jörg S.; Sahin, Merve

2015-01-01

ABSTRACT Direct, mediator-free transfer of electrons between a microbial cell and a solid phase in its surrounding environment has been suggested to be a widespread and ecologically significant process. The high rates of microbial electron uptake observed during microbially influenced corrosion of iron [Fe(0)] and during microbial electrosynthesis have been considered support for a direct electron uptake in these microbial processes. However, the underlying molecular mechanisms of direct electron uptake are unknown. We investigated the electron uptake characteristics of the Fe(0)-corroding and electromethanogenic archaeon Methanococcus maripaludis and discovered that free, surface-associated redox enzymes, such as hydrogenases and presumably formate dehydrogenases, are sufficient to mediate an apparent direct electron uptake. In genetic and biochemical experiments, we showed that these enzymes, which are released from cells during routine culturing, catalyze the formation of H2 or formate when sorbed to an appropriate redox-active surface. These low-molecular-weight products are rapidly consumed by M. maripaludis cells when present, thereby preventing their accumulation to any appreciable or even detectable level. Rates of H2 and formate formation by cell-free spent culture medium were sufficient to explain the observed rates of methane formation from Fe(0) and cathode-derived electrons by wild-type M. maripaludis as well as by a mutant strain carrying deletions in all catabolic hydrogenases. Our data collectively show that cell-derived free enzymes can mimic direct extracellular electron transfer during Fe(0) corrosion and microbial electrosynthesis and may represent an ecologically important but so far overlooked mechanism in biological electron transfer. PMID:25900658

Promotion of prescription drugs to consumers.

PubMed

Rosenthal, Meredith B; Berndt, Ernst R; Donohue, Julie M; Frank, Richard G; Epstein, Arnold M

2002-02-14

Spending on prescription drugs is the fastest growing component of the health care budget. There is public concern about the possibility that direct-to-consumer advertising of prescription drugs will result in inappropriate prescribing and higher costs of care. Guidelines issued in 1997 by the Food and Drug Administration (FDA) regarding advertising to consumers through electronic media are considered by some to be responsible for unleashing a flood of direct-to-consumer advertising. Using data on spending for promotional purposes and sales of prescription drugs, we examined industrywide trends for various types of promotion. We also tracked the relation between promotional efforts and sales over time. Finally, we documented the variation in direct-to-consumer advertising among and within five therapeutic classes of drugs and compared the variation in the intensity of such advertising with variation in the intensity of promotion to health care professionals. Annual spending on direct-to-consumer advertising for prescription drugs tripled between 1996 and 2000, when it reached nearly $2.5 billion. Despite this increase, such advertising accounts for only 15 percent of the money spent on drug promotion and is highly concentrated on a subgroup of products. Within a therapeutic class, there is marked variation in the intensity of direct-to-consumer advertising, and the amount of such advertising for specific products fluctuates over time. The initial surge in direct-to-consumer advertising preceded the 1997 FDA guidelines that clarified the rules for electronic direct-to-consumer advertising, and thus the 1997 guidelines may not have been the most important reason for the overall increase. Although the use of direct-to-consumer advertising has grown disproportionately to other forms of promotion, it continues to account for a small proportion of total promotional efforts. Nevertheless, physicians must assist patients in evaluating health-related information obtained through direct advertising.

Effect of electron beam irradiation on bacterial and Ascaris ova loads and volatile organic compounds in municipal sewage sludge

NASA Astrophysics Data System (ADS)

Engohang-Ndong, Jean; Uribe, R. M.; Gregory, Roger; Gangoda, Mahinda; Nickelsen, Mike G.; Loar, Philip

2015-07-01

Wastewater treatment plants produce large amounts of biosolids that can be utilized for land applications. However, prior to their use, these biosolids must be treated to eliminate risks of infections and to reduce upsetting odors. In this study, microbiological and chemical analyzes were performed before and after treatment of sewage sludge with 3 MeV of an electron beam accelerator in a pilot processing plant. Thus, we determined that dose 4.5 kGy was required to reduce fecal coliform counts to safe levels for land applications of sludge while, 14.5 kGy was necessary to decrease Ascaris ova counts to safe levels. Furthermore, at low doses, electron beam irradiation showed little effect on the concentrations of volatile organic compounds, while some increase were recorded at high doses. The concentration of dimethyl sulfide was reduced by 50-70% at irradiation doses of 25.7 kGy and 30.7 kGy respectively. By contrast, electron beam irradiation increased dimethyl disulfide concentrations. We also showed that electron beam treatment was less energy-consuming with shorter processing times than conventional techniques used to decontaminate sludge. Hence opening new avenues for large urban agglomerations to save money and time when treating biosolids for land application.

Wide Bandgap Technology Enhances Performance of Electric-Drive Vehicles |

Science.gov Websites

, WBG materials/devices enable lighter, more compact, and more efficient power electronics for vehicles, and increased electric vehicle adoption by consumers. Wide bandgap power electronics devices power electronics component size and potentially reduce system or component-level cost, while improving

40 CFR 272.951 - Louisiana state-administered program: Final authorization.

Code of Federal Regulations, 2012 CFR

2012-07-01

... changes conforming to the addition of Consumer Electronics as a state universal waste. These changes were... Electronics as part of the State's approved program. (iii) The following authorized provisions of the...

40 CFR 272.951 - Louisiana state-administered program: Final authorization.

Code of Federal Regulations, 2011 CFR

2011-07-01

... changes conforming to the addition of Consumer Electronics as a state universal waste. These changes were... Electronics as part of the State's approved program. (iii) The following authorized provisions of the...

Factors affecting willingness to share electronic health data among California consumers.

PubMed

Kim, Katherine K; Sankar, Pamela; Wilson, Machelle D; Haynes, Sarah C

2017-04-04

Robust technology infrastructure is needed to enable learning health care systems to improve quality, access, and cost. Such infrastructure relies on the trust and confidence of individuals to share their health data for healthcare and research. Few studies have addressed consumers' views on electronic data sharing and fewer still have explored the dual purposes of healthcare and research together. The objective of the study is to explore factors that affect consumers' willingness to share electronic health information for healthcare and research. This study involved a random-digit dial telephone survey of 800 adult Californians conducted in English and Spanish. Logistic regression was performed using backward selection to test for significant (p-value ≤ 0.05) associations of each explanatory variable with the outcome variable. The odds of consent for electronic data sharing for healthcare decreased as Likert scale ratings for EHR impact on privacy worsened, odds ratio (OR) = 0.74, 95% CI [0.60, 0.90]; security, OR = 0.80, 95% CI [0.66, 0.98]; and quality, OR = 0.59, 95% CI [0.46-0.75]. The odds of consent for sharing for research was greater for those who think EHR will improve research quality, OR = 11.26, 95% CI [4.13, 30.73]; those who value research benefit over privacy OR = 2.72, 95% CI [1.55, 4.78]; and those who value control over research benefit OR = 0.49, 95% CI [0.26, 0.94]. Consumers' choices about electronically sharing health information are affected by their attitudes toward EHRs as well as beliefs about research benefit and individual control. Design of person-centered interventions utilizing electronically collected health information, and policies regarding data sharing should address these values of importance to people. Understanding of these perspectives is critical for leveraging health data to support learning health care systems.

Automated integration of continuous glucose monitor data in the electronic health record using consumer technology

PubMed Central

Kumar, Rajiv B; Goren, Nira D; Stark, David E; Wall, Dennis P; Longhurst, Christopher A

2016-01-01

The diabetes healthcare provider plays a key role in interpreting blood glucose trends, but few institutions have successfully integrated patient home glucose data in the electronic health record (EHR). Published implementations to date have required custom interfaces, which limit wide-scale replication. We piloted automated integration of continuous glucose monitor data in the EHR using widely available consumer technology for 10 pediatric patients with insulin-dependent diabetes. Establishment of a passive data communication bridge via a patient’s/parent’s smartphone enabled automated integration and analytics of patient device data within the EHR between scheduled clinic visits. It is feasible to utilize available consumer technology to assess and triage home diabetes device data within the EHR, and to engage patients/parents and improve healthcare provider workflow. PMID:27018263

16 CFR 1110.5 - Acceptable certificates.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Acceptable certificates. 1110.5 Section 1110.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CERTIFICATES OF COMPLIANCE § 1110.5 Acceptable certificates. A certificate that is in hard copy or electronic...

16 CFR 1110.5 - Acceptable certificates.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Acceptable certificates. 1110.5 Section 1110.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CERTIFICATES OF COMPLIANCE § 1110.5 Acceptable certificates. A certificate that is in hard copy or electronic...

16 CFR 1110.5 - Acceptable certificates.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Acceptable certificates. 1110.5 Section 1110.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CERTIFICATES OF COMPLIANCE § 1110.5 Acceptable certificates. A certificate that is in hard copy or electronic...

16 CFR 1110.5 - Acceptable certificates.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Acceptable certificates. 1110.5 Section 1110.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CERTIFICATES OF COMPLIANCE § 1110.5 Acceptable certificates. A certificate that is in hard copy or electronic...

47 CFR 301.6 - Retailer participation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... responsible for checking consumer or household eligibility but shall report to NTIA suspicious patterns of customer behavior. (4) Use commercially reasonable methods to order and manage inventory to meet customer... requires the retailers to self certify that they: (A) Have been engaged in the consumer electronics retail...

78 FR 4418 - Electronic Submission Process for Requesting Export Certificates From the Center for Devices and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-22

... (CDRH). The electronic process will help fulfill both the legislative and application time processing... Devices and Radiological Health (CDRH), Division of Small Manufacturers, International and Consumer... regulated by CDRH as a voluntary alternative to paper submissions. With electronic submissions, CDRH can...

Polyhydroxybutyrate accumulation by a Serratia sp.

PubMed

Lugg, Harriet; Sammons, Rachel L; Marquis, Peter M; Hewitt, Christopher J; Yong, Ping; Paterson-Beedle, Marion; Redwood, Mark D; Stamboulis, Artemis; Kashani, Mitra; Jenkins, Mike; Macaskie, Lynne E

2008-03-01

A strain of Serratia sp. showed intracellular electron-transparent inclusion bodies when incubated in the presence of citrate and glycerol 2-phosphate without nitrogen source following pre-growth under carbon-limitation in continuous culture. About 1.3 mmol citrate were consumed per 450 mg biomass, giving a calculated yield of maximally 55% of stored material per g of biomass dry wt. The inclusion bodies were stained with Sudan Black and Nile Red (NR), suggesting a lipid material, which was confirmed as polyhydroxybutyrate (PHB) by analysis of molecular fragments by GC and by FTIR spectroscopy of isolated bio-PHB in comparison with reference material. Multi-parameter flow cytometry in conjunction with NR fluorescence, and electron microscopy, showed that not all cells contained heavy PHB bodies, suggesting the potential for increasing the overall yield. The economic attractiveness is enhanced by the co-production of nanoscale hydroxyapatite (HA), a possible high-value precursor for bone replacement materials.

Agent-Based Framework for Personalized Service Provisioning in Converged IP Networks

NASA Astrophysics Data System (ADS)

Podobnik, Vedran; Matijasevic, Maja; Lovrek, Ignac; Skorin-Kapov, Lea; Desic, Sasa

In a global multi-service and multi-provider market, the Internet Service Providers will increasingly need to differentiate in the service quality they offer and base their operation on new, consumer-centric business models. In this paper, we propose an agent-based framework for the Business-to-Consumer (B2C) electronic market, comprising the Consumer Agents, Broker Agents and Content Agents, which enable Internet consumers to select a content provider in an automated manner. We also discuss how to dynamically allocate network resources to provide end-to-end Quality of Service (QoS) for a given consumer and content provider.

Nano-graphene induced positive effects on methanogenesis in anaerobic digestion.

PubMed

Tian, Tian; Qiao, Sen; Li, Xue; Zhang, Meijiao; Zhou, Jiti

2017-01-01

The effects of nano-graphene on methanogenesis in anaerobic digestion was investigated. Short-term results showed that graphene (30 and 120mg/L) had significantly positive effects on methane production rate, which increased by 17.0% and 51.4%. Further investigation indicated that acetate-consuming methanogenesis was enhanced. The failure of quinones to replicate graphene stimulation effects on methanogenesis suggested that graphene did not function as electron shuttles. After 55 day's operation at room temperature (from 20 to 10°C, the methane production rate with 30mg/L graphene was 14.3% higher than that of the control, while 120mg/L graphene showed a slight inhibition on methane yield. Illumina sequencing data showed that the archaeal community structure remained fairly constant as the incubated sludge with graphene at low temperature, in which Methanoregula, Methanosaeta and Methanospirillum were the dominant species. Besides, Geobacter enrichment was observed with graphene, suggesting that the direct interspecies electron transfer might be promoted. Copyright © 2016 Elsevier Ltd. All rights reserved.

75 FR 27264 - Video Device Competition; Implementation of Section 304 of the Telecommunications Act of 1996...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-14

... and Consumer Electronics Equipment AGENCY: Federal Communications Commission. ACTION: Notice of... explore the potential for allowing any electronics manufacturer to offer smart video devices at retail...

Obsolescence of electronics at the VLT

NASA Astrophysics Data System (ADS)

Hüdepohl, Gerhard; Haddad, Juan-Pablo; Lucuix, Christian

2016-07-01

The ESO Very Large Telescope Observatory (VLT) at Cerro Paranal in Chile had its first light in 1998. Most of the telescopes' electronics components were chosen and designed in the mid 1990s and are now around 20 years old. As a consequence we are confronted with increasing failure rates due to aging and lack of spare parts, since many of the components are no longer available on the market. The lifetime of large telescopes is generally much beyond 25 years. Therefore the obsolescence of electronics components and modules becomes an issue sooner or later and forces the operations teams to upgrade the systems to new technology in order to avoid that the telescope becomes inoperable. Technology upgrade is a time and money consuming process, which in many cases is not straightforward and has various types of complications. This paper shows the strategy, analysis, approach, timeline, complications and progress in obsolescence driven electronics upgrades at the ESO Very Large Telescope (VLT) at the Paranal Observatory.

Electronic Commerce "in the dark"

NASA Astrophysics Data System (ADS)

Buzzi, Maria Claudia; Buzzi, Marina; Leporini, Barbara; Senette, Caterina

The widespread diffusion of electronic commerce offers a great opportunity for blind people. We describe the results of an electronic survey carried out with 22 blind and 22 sighted users in order to understand the difficulties and obstacles they experience shopping on-line, and solicit their expectations and suggestions for making the interaction simpler and more satisfying. Results show that blind users shop on-line much less than their sighted counterparts, since they encounter more difficulties not only when making a purchase, but even in the navigation phase preceding the commercial transaction. Complex layouts and unstructured content can prevent an e-transaction from being successfully completed. Furthermore, security, privacy and trustiness, common concerns for all consumers, also impact on the fear of buying via Internet for the visually impaired. Poor usability leads to a potential loss of revenue for on-line companies and a lost opportunity to increase a blind person's independence. Providing simpler, more understandable UIs would benefit all users and fuel the expansion of electronic commerce.

77 FR 28604 - Agency Information Collection Activities; Proposed Collection; Comment Request; Guidance for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-15

... Approved Application as Required by the Dietary Supplement and Nonprescription Drug Consumer Protection Act... Dietary Supplement and Nonprescription Drug Consumer Protection Act.'' DATES: Submit either electronic or... Nonprescription Human Drug Products Marketed Without an Approved Application as Required by the Dietary Supplement...

77 FR 77187 - Electronic Fund Transfers (Regulation E)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-31

... section 1073 of the Dodd-Frank Wall Street Reform and Consumer Protection Act regarding remittance.... SUPPLEMENTARY INFORMATION: I. Overview Section 1073 of the Dodd-Frank Wall Street Reform and Consumer Protection... providers, section 1073 creates a new EFTA section 919, and generally requires: (i) The provision of...

12 CFR 208.82 - Definitions for purposes of this subpart.

Code of Federal Regulations, 2010 CFR

2010-01-01

... SYSTEM MEMBERSHIP OF STATE BANKING INSTITUTIONS IN THE FEDERAL RESERVE SYSTEM (REGULATION H) Consumer...)(10)). (d) Consumer means an individual who purchases, applies to purchase, or is solicited to... attempt to control the behavior of another person. (g) Electronic media includes any means for...

Consumer Sleep Technologies: A Review of the Landscape.

PubMed

Ko, Ping-Ru T; Kientz, Julie A; Choe, Eun Kyoung; Kay, Matthew; Landis, Carol A; Watson, Nathaniel F

2015-12-15

To review sleep related consumer technologies, including mobile electronic device "apps," wearable devices, and other technologies. Validation and methodological transparency, the effect on clinical sleep medicine, and various social, legal, and ethical issues are discussed. We reviewed publications from the digital libraries of the Association for Computing Machinery, Institute of Electrical and Electronics Engineers, and PubMed; publications from consumer technology websites; and mobile device app marketplaces. Search terms included "sleep technology," "sleep app," and "sleep monitoring." Consumer sleep technologies are categorized by delivery platform including mobile device apps (integrated with a mobile operating system and utilizing mobile device functions such as the camera or microphone), wearable devices (on the body or attached to clothing), embedded devices (integrated into furniture or other fixtures in the native sleep environment), accessory appliances, and conventional desktop/website resources. Their primary goals include facilitation of sleep induction or wakening, self-guided sleep assessment, entertainment, social connection, information sharing, and sleep education. Consumer sleep technologies are changing the landscape of sleep health and clinical sleep medicine. These technologies have the potential to both improve and impair collective and individual sleep health depending on method of implementation. © 2015 American Academy of Sleep Medicine.

Effects of humidity on the magnetic and woody characteristics of powder-type magnetic wood

NASA Astrophysics Data System (ADS)

Oka, H.; Tokuta, H.; Namizaki, Y.; Sekino, N.

2004-05-01

Among three types of proposed magnetic wood, powder-type magnetic wood can be made of recycled magnetic materials from IT devices, consumer electronics and waste wood. Because of its wood powder content, powder-type magnetic wood shows special characteristics different from those of typical magnetic materials. We focused on the relationship between humidity and magnetic characteristics of powder-type magnetic wood. The magnetic powder ratio, wood powder density and magnetic binder density were all examined as parameters for AC permeability.

Soldering Technology and Product Assurance (7th) Proceedings of Annual Seminar Held in China Lake, California on 23, 24, 25 February 1983.

DTIC Science & Technology

1983-02-01

product. For commercial . - iJ% .--.-. - • .. - .. .. - - -- . .-. . . . . : . : : , ’. , .- ,. . j-,,_. . , ,_= . -42- electronics used in consumer ...and is variable according to the environment of the end use. For consumer products used indoors or in benign environments, the cost should not be...assaults have been leveled against consumer products industries and the steel industry, mainly from foreign competitors, the defense and aerospace

High Voltage Li-Ion Battery Using Exfoliated Graphite/Graphene Nanosheets Anode.

PubMed

Agostini, Marco; Brutti, Sergio; Hassoun, Jusef

2016-05-04

The achievement of a new generation of lithium-ion battery, suitable for a continuously growing consumer electronic and sustainable electric vehicle markets, requires the development of new, low-cost, and highly performing materials. Herein, we propose a new and efficient lithium-ion battery obtained by coupling exfoliated graphite/graphene nanosheets (EGNs) anode and high-voltage, spinel-structure cathode. The anode shows a capacity exceeding by 40% that ascribed to commercial graphite in lithium half-cell, at very high C-rate, due to its particular structure and morphology as demonstrated by X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The Li-ion battery reveals excellent efficiency and cycle life, extending up to 150 cycles, as well as an estimated practical energy density of about 260 Wh kg(-1), that is, a value well exceeding the one associated with the present-state Li-ion battery.

Lindane residues in cultivated cucumber and in the most consumed fish in Caspian Sea (Iran).

PubMed

Shokrzadeh, M; Saeedi Saravi, S S; Zehtab Yazdi, Y

2009-09-01

In this study, the concentrations of lindane residues (organochlorine pesticides) were analyzed in samples of cultivated cucumbers (Cucumis sativus L.) and four species of most consumed fish (Sefid, Koli, Kilca and Kafal fish). Samples of cucumber were collected from five sites in Sari city (north, south, east, west and central areas) and samples of fish were caught using electric fishing from four major fishing centers (Chalous and Babolsar cities, Khazar Abad and Miankaleh regions) in Mazandaran province of Iran. Quantitative determination of the lindane content was performed by gas chromatography electron-capture detection (GC-ECD). The results showed that the concentration of lindane in cucumber samples and in the dorsal muscle of the selected fish were less than the Food and Agriculture Organization/World Health Organization (FAO/WHO) recommended intake.

Biocompatible and totally disintegrable semiconducting polymer for ultrathin and ultralightweight transient electronics

PubMed Central

Lei, Ting; Guan, Ming; Liu, Jia; Lin, Hung-Cheng; Pfattner, Raphael; McGuire, Allister F.; Huang, Tsung-Ching; Shao, Leilai; Cheng, Kwang-Ting; Tok, Jeffrey B.-H.; Bao, Zhenan

2017-01-01

Increasing performance demands and shorter use lifetimes of consumer electronics have resulted in the rapid growth of electronic waste. Currently, consumer electronics are typically made with nondecomposable, nonbiocompatible, and sometimes even toxic materials, leading to serious ecological challenges worldwide. Here, we report an example of totally disintegrable and biocompatible semiconducting polymers for thin-film transistors. The polymer consists of reversible imine bonds and building blocks that can be easily decomposed under mild acidic conditions. In addition, an ultrathin (800-nm) biodegradable cellulose substrate with high chemical and thermal stability is developed. Coupled with iron electrodes, we have successfully fabricated fully disintegrable and biocompatible polymer transistors. Furthermore, disintegrable and biocompatible pseudo-complementary metal–oxide–semiconductor (CMOS) flexible circuits are demonstrated. These flexible circuits are ultrathin (<1 μm) and ultralightweight (∼2 g/m2) with low operating voltage (4 V), yielding potential applications of these disintegrable semiconducting polymers in low-cost, biocompatible, and ultralightweight transient electronics. PMID:28461459

Biocompatible and totally disintegrable semiconducting polymer for ultrathin and ultralightweight transient electronics.

PubMed

Lei, Ting; Guan, Ming; Liu, Jia; Lin, Hung-Cheng; Pfattner, Raphael; Shaw, Leo; McGuire, Allister F; Huang, Tsung-Ching; Shao, Leilai; Cheng, Kwang-Ting; Tok, Jeffrey B-H; Bao, Zhenan

2017-05-16

Increasing performance demands and shorter use lifetimes of consumer electronics have resulted in the rapid growth of electronic waste. Currently, consumer electronics are typically made with nondecomposable, nonbiocompatible, and sometimes even toxic materials, leading to serious ecological challenges worldwide. Here, we report an example of totally disintegrable and biocompatible semiconducting polymers for thin-film transistors. The polymer consists of reversible imine bonds and building blocks that can be easily decomposed under mild acidic conditions. In addition, an ultrathin (800-nm) biodegradable cellulose substrate with high chemical and thermal stability is developed. Coupled with iron electrodes, we have successfully fabricated fully disintegrable and biocompatible polymer transistors. Furthermore, disintegrable and biocompatible pseudo-complementary metal-oxide-semiconductor (CMOS) flexible circuits are demonstrated. These flexible circuits are ultrathin (<1 μm) and ultralightweight (∼2 g/m 2 ) with low operating voltage (4 V), yielding potential applications of these disintegrable semiconducting polymers in low-cost, biocompatible, and ultralightweight transient electronics.

Shielding small-field high-energy electron beams in cancer treatment

NASA Astrophysics Data System (ADS)

Farahani, M.; Eichmiller, F. C.; McLaughlin, W. L.

1994-04-01

The purpose of this study was to find an effective material that can be prepared quickly and easily prior to small-field electron-beam treatments so that lesions of the head and neck can be treated with minimal irradiation of the surrounding healthy tissue. Conventional preparation of custom anatomical prosthetic radiation shields, which are usually metal alloy masks, has been time-consuming and uncomfortable for the patients. New materials, made from light-body Reprosil TM (L. L. Caulk) filled with fine metal powder consisting of 70% Ag-30% Cu alloy, can be made by blending 90% (w/w) metal powder with 10% polysiloxane base and adding the polymerization catalyst separately. These combinations were mixed to form comfortably fitted shielding composites of different thicknesses. The electron-beam attenuation properties of slabs of this material were studied by irradiating calibrated radiochromic film (GafChromic TM) dosimeters behind different thicknesses of composite samples with small-field 13-, 15- and 18-MeV electron beams from a therapeutic linear accelerator. The results showed that this material can suitably attenuate high-energy electron beams when used in reasonable thicknesses.

76 FR 59394 - Energy Conservation Program for Consumer Products: Publication of the Extension of Interim Waiver...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-26

... Electronics America, Inc. From the Department of Energy Residential Refrigerator and Refrigerator-Freezer Test... Electronics America, Inc. (Samsung) from energy efficiency test procedure requirements that are applicable to...

Telecommunicating in Tomorrow's World.

ERIC Educational Resources Information Center

Harkins, Judy

1983-01-01

Examples of new electronic devices used by deaf persons include electronic mail capabilities, teleprompters that can caption television live, and speech synthesis equipment. Consumers can establish and use assistive device centers to become familiar with the latest in technology. (CL)

Distance Education: A Consumer's Guide. What Distance Learners Need To Know.

ERIC Educational Resources Information Center

Western Interstate Commission for Higher Education, Boulder, CO. Western Cooperative for Educational Communications.

This pamphlet is intended to assist the consumer in making informed decisions when choosing between distance learning programs. Distance education and distance learners are defined. Included is advice on beginning a program search; choosing a school; accreditation; evaluating quality of electronically offered programs; evaluate non-accredited…

Resources for Family and Consumer Science Teachers, 1995.

ERIC Educational Resources Information Center

Scholl, Jan

This annotated bibliography of resources for family and consumer science teachers lists 59 items developed for "Teacher Pages" (an electronic information service) by Penn State Cooperative Extension Service between December 1, 1993 and December 1, 1994. Each listing includes a short description, source, address, price if appropriate, and ordering…

78 FR 76297 - Social Media: Consumer Compliance Risk Management Guidance

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-17

... controls should apply to all customers, products and services, including customers engaging in electronic banking (e-banking) through the use of social media, and e- banking products and services offered in the...., Washington DC 20219, (202) 649-7181. Board: Lanette Meister, Senior Supervisory Consumer Financial Services...

16 CFR § 1110.5 - Acceptable certificates.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Acceptable certificates. § 1110.5 Section § 1110.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CERTIFICATES OF COMPLIANCE § 1110.5 Acceptable certificates. A certificate that is in hard copy or electronic...

77 FR 57566 - Announcement of Public Meeting on the Consumer Confidence Report (CCR) Rule Retrospective Review...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-18

... ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OW-2012-0035; FRL-9730-7] Announcement of Public Meeting on the Consumer Confidence Report (CCR) Rule Retrospective Review and Request for Public Comment on Potential Approaches to Electronic Delivery of the CCR; Correction AGENCY: Environmental Protection Agency...

Ranking product aspects through sentiment analysis of online reviews

NASA Astrophysics Data System (ADS)

Wang, Wei; Wang, Hongwei; Song, Yuan

2017-03-01

The electronic word-of-mouth (e-WOM) is one of the most important among all the factors affecting consumers' behaviours. Opinions towards a product through online reviews will influence purchase decisions of other online consumers by changing their perceptions on the product quality. Furthermore, each product aspect may impact consumers' intentions differently. Thus, sentiment analysis and econometric models are incorporated to examine the relationship between purchase intentions and aspect-opinion pairs, which enable the weight estimation for each product aspect. We first identify product aspects and reduce dimensions to extract aspect-opinion pairs. Next the information gain is calculated for each aspect through entropy theory. Based on sentiment polarity and sentiment strength, we formulate an econometric model by integrating the information gain to measure the aspect's weight. In the experiment, we track 386 digital cameras on Amazon for 39 months, and results show that the aspect weight for digital cameras is detected more precisely than TF-ID and HAC algorithms. The results will bridge product aspects and consumption intention to facilitate e-WOM-based marketing.

NOAA Weather Radio - Receiver Consumer Information

Science.gov Websites

retail outlets such as electronics, department, sporting goods, and boat and marine accessory stores and stores with an electronics department. NWR broadcasts are in the Public Service VHF frequencies, just Electronics, Inc 5185 Cliffwood Drive Montclair CA 91763 Customer Support: 866-KAITO76 (866-524-8676) Fax:(909

Security Implications of Electronic Commerce: A Survey of Consumers and Businesses.

ERIC Educational Resources Information Center

Furnell, S. M.; Karweni, T.

1999-01-01

Examines general requirement for security technologies that provide a basis for trust in the electronic commerce environment. Discusses the results of two surveys that included general Internet users who are potential customers as well as commercial businesses, that considered attitudes to electronic commerce in general and options relating to…

Recycling Pricing and Coordination of WEEE Dual-Channel Closed-Loop Supply Chain Considering Consumers’ Bargaining

PubMed Central

Zhu, Xiaodong; Wang, Jing; Tang, Juan

2017-01-01

Environmentally friendly handling and efficient recycling of waste electrical on Waste Electrical and Electronic Equipment (WEEE) have grown to be a global social problem. As holders of WEEE, consumers have a significant effect on the recycling process. A consideration of and attention to the influence of consumer behavior in the recycling process can help achieve more effective recycling of WEEE. In this paper, we built a dual-channel closed-loop supply chain model composed of manufacturers, retailers, and network recycling platforms. Based on the influence of customer bargaining behavior, we studied several different scenarios of centralized decision-making, decentralized decision-making, and contract coordination, using the Stackelberg game theory. The results show that retailers and network recycling platforms will reduce the direct recovery prices to maintain their own profit when considering the impact of consumer bargaining behavior, while remanufacturers will improve the transfer payment price for surrendering part of the profit under revenue and the expense sharing contract. Using this contract, we can achieve supply chain coordination and eliminate the effect of consumer bargaining behavior on supply chain performance. It can be viewed from the parameter sensitivity analysis that when we select the appropriate sharing coefficient, the closed-loop supply chain can achieve the same system performance under a centralized decision. PMID:29244778

The Consumer Juggernaut: Web-Based and Mobile Applications as Innovation Pioneer

NASA Astrophysics Data System (ADS)

Messerschmitt, David G.

As happened previously in electronics, software targeted at consumers is increasingly the focus of investment and innovation. Some of the areas where it is leading is animated interfaces, treating users as a community, audio and video information, software as a service, agile software development, and the integration of business models with software design. As a risk-taking and experimental market, and as a source of ideas, consumer software can benefit other areas of applications software. The influence of consumer software can be magnified by research into the internal organizations and processes of the innovative firms at its foundation.

Employment Lessons from the Electronics Industry.

ERIC Educational Resources Information Center

Alic, John A.; Harris, Martha Caldwell

1986-01-01

Semiskilled and "unskilled" workers in semiconductors, computer manufacturing, and consumer electronics industries are more likely than other workers to lose jobs because of technology, imports, and offshore production. However, advances in technology do tend to create jobs for skilled workers. (CT)

Evaluation of Miscellaneous and Electronic Device Energy Use in Hospitals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Black, Douglas R.; Lanzisera, Steven M.; Lai, Judy

2012-09-01

Miscellaneous and electronic loads (MELs) consume about one-thirdof the primary energy used in US buildings, and their energy use is increasing faster than other end-uses. In healthcare facilities, 30percent of the annual electricity was used by MELs in 2008. This paper presents methods and challenges for estimating medical MELs energy consumption along with estimates of energy use in a hospital by combining device-level metered data with inventories and usage information. An important finding is that common, small devices consume large amounts of energy in aggregate and should not be ignored when trying to address hospital energy use.

Making texts in electronic health records comprehensible to consumers: a prototype translator.

PubMed

Zeng-Treitler, Qing; Goryachev, Sergey; Kim, Hyeoneui; Keselman, Alla; Rosendale, Douglas

2007-10-11

Narrative reports from electronic health records are a major source of content for personal health records. We designed and implemented a prototype text translator to make these reports more comprehensible to consumers. The translator identifies difficult terms, replaces them with easier synonyms, and generates and inserts explanatory texts for them. In feasibility testing, the application was used to translate 9 clinical reports. Majority (68.8%) of text replacements and insertions were deemed correct and helpful by expert review. User evaluation demonstrated a non-statistically significant trend toward better comprehension when translation is provided (p=0.15).

Making Texts in Electronic Health Records Comprehensible to Consumers: A Prototype Translator

PubMed Central

Zeng-Treitler, Qing; Goryachev, Sergey; Kim, Hyeoneui; Keselman, Alla; Rosendale, Douglas

2007-01-01

Narrative reports from electronic health records are a major source of content for personal health records. We designed and implemented a prototype text translator to make these reports more comprehensible to consumers. The translator identifies difficult terms, replaces them with easier synonyms, and generates and inserts explanatory texts for them. In feasibility testing, the application was used to translate 9 clinical reports. Majority (68.8%) of text replacements and insertions were deemed correct and helpful by expert review. User evaluation demonstrated a non-statistically significant trend toward better comprehension when translation is provided (p=0.15). PMID:18693956

Personal electronics printing via tapping mode composite liquid metal ink delivery and adhesion mechanism

NASA Astrophysics Data System (ADS)

Zheng, Yi; He, Zhi-Zhu; Yang, Jun; Liu, Jing

2014-04-01

Printed electronics is becoming increasingly important in a variety of newly emerging areas. However, restricted to the rather limited conductive inks and available printing strategies, the current electronics manufacture is usually confined to industry level. Here, we show a highly cost-effective and entirely automatic printing way towards personal electronics making, through introducing a tapping-mode composite fluid delivery system. Fundamental mechanisms regarding the reliable printing, transfer and adhesion of the liquid metal inks on the substrate were disclosed through systematic theoretical interpretation and experimental measurements. With this liquid metal printer, a series of representative electronic patterns spanning from single wires to desired complex configurations such as integrated circuit (IC), printed-circuits-on-board (PCB), electronic paintings, or more do-it-yourself (DIY) devices, were demonstrated to be printed out with high precision in a moment. And the total machine cost already reached personally affordable price. This is hard to achieve by a conventional PCB technology which generally takes long time and is material, water and energy consuming, while the existing printed electronics is still far away from the real direct printing goal. The present work opens the way for large scale personal electronics manufacture and is expected to generate important value for the coming society.

Personal electronics printing via tapping mode composite liquid metal ink delivery and adhesion mechanism.

PubMed

Zheng, Yi; He, Zhi-Zhu; Yang, Jun; Liu, Jing

2014-04-04

Printed electronics is becoming increasingly important in a variety of newly emerging areas. However, restricted to the rather limited conductive inks and available printing strategies, the current electronics manufacture is usually confined to industry level. Here, we show a highly cost-effective and entirely automatic printing way towards personal electronics making, through introducing a tapping-mode composite fluid delivery system. Fundamental mechanisms regarding the reliable printing, transfer and adhesion of the liquid metal inks on the substrate were disclosed through systematic theoretical interpretation and experimental measurements. With this liquid metal printer, a series of representative electronic patterns spanning from single wires to desired complex configurations such as integrated circuit (IC), printed-circuits-on-board (PCB), electronic paintings, or more do-it-yourself (DIY) devices, were demonstrated to be printed out with high precision in a moment. And the total machine cost already reached personally affordable price. This is hard to achieve by a conventional PCB technology which generally takes long time and is material, water and energy consuming, while the existing printed electronics is still far away from the real direct printing goal. The present work opens the way for large scale personal electronics manufacture and is expected to generate important value for the coming society.

Personal electronics printing via tapping mode composite liquid metal ink delivery and adhesion mechanism

PubMed Central

Zheng, Yi; He, Zhi-Zhu; Yang, Jun; Liu, Jing

2014-01-01

Printed electronics is becoming increasingly important in a variety of newly emerging areas. However, restricted to the rather limited conductive inks and available printing strategies, the current electronics manufacture is usually confined to industry level. Here, we show a highly cost-effective and entirely automatic printing way towards personal electronics making, through introducing a tapping-mode composite fluid delivery system. Fundamental mechanisms regarding the reliable printing, transfer and adhesion of the liquid metal inks on the substrate were disclosed through systematic theoretical interpretation and experimental measurements. With this liquid metal printer, a series of representative electronic patterns spanning from single wires to desired complex configurations such as integrated circuit (IC), printed-circuits-on-board (PCB), electronic paintings, or more do-it-yourself (DIY) devices, were demonstrated to be printed out with high precision in a moment. And the total machine cost already reached personally affordable price. This is hard to achieve by a conventional PCB technology which generally takes long time and is material, water and energy consuming, while the existing printed electronics is still far away from the real direct printing goal. The present work opens the way for large scale personal electronics manufacture and is expected to generate important value for the coming society. PMID:24699375

Consumer Sleep Technologies: A Review of the Landscape

PubMed Central

Ko, Ping-Ru T.; Kientz, Julie A.; Choe, Eun Kyoung; Kay, Matthew; Landis, Carol A.; Watson, Nathaniel F.

2015-01-01

Objective: To review sleep related consumer technologies, including mobile electronic device “apps,” wearable devices, and other technologies. Validation and methodological transparency, the effect on clinical sleep medicine, and various social, legal, and ethical issues are discussed. Methods: We reviewed publications from the digital libraries of the Association for Computing Machinery, Institute of Electrical and Electronics Engineers, and PubMed; publications from consumer technology websites; and mobile device app marketplaces. Search terms included “sleep technology,” “sleep app,” and “sleep monitoring.” Results: Consumer sleep technologies are categorized by delivery platform including mobile device apps (integrated with a mobile operating system and utilizing mobile device functions such as the camera or microphone), wearable devices (on the body or attached to clothing), embedded devices (integrated into furniture or other fixtures in the native sleep environment), accessory appliances, and conventional desktop/website resources. Their primary goals include facilitation of sleep induction or wakening, self-guided sleep assessment, entertainment, social connection, information sharing, and sleep education. Conclusions: Consumer sleep technologies are changing the landscape of sleep health and clinical sleep medicine. These technologies have the potential to both improve and impair collective and individual sleep health depending on method of implementation. Citation: Ko PR, Kientz JA, Choe EK, Kay M, Landis CA, Watson NF. Consumer sleep technologies: a review of the landscape. J Clin Sleep Med 2015;11(12):1455–1461. PMID:26156958

An analysis of preferences for hazardous substances free products: manufacturing, use and end of life of mobile phones.

PubMed

Kaushal, Rajendra Kumar; Nema, Arvind K

2012-11-01

Electronic communication devices such as mobile phones pose significant environmental risks when disposed of after the end of their useful life. Mobile communication devices are one of the fastest growing contributors to the electronic waste (e-waste) stream. Recent legislative pressure and increasing awareness about the environmental risk associated with the hazardous components of the electronic products warrants the manufacturers to reduce or replace the hazardous materials with alternatives. The present study analyses the economic consequences of reducing or replacing these hazardous materials and the possible response of the consumers. A strategic game theory model has been applied in this paper for manufacturer and consumers considering the cost difference between hazardous substances free (HSF) and hazardous substance (HS) mobile. Results suggest that the HSF mobiles can be a preferred choice of the manufacturers as well as consumers if the cost of disposal of HS mobiles can be internalized and a marginal incentive (e.g. 0.9% for a cost difference to 5%, and 5.3% for a cost difference to 10%) is given. The study further highlights the need for realizing the fact that passing on the incentives to the consumers in order to promote schemes for return back to manufacturer at its end of life for effective reuse and recycling gives higher returns.

12 CFR 334.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2011 CFR

2011-01-01

... or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing... by calling a single toll-free telephone number. (2) Opt-out methods that are not reasonable and...

12 CFR 334.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2012 CFR

2012-01-01

... or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing... by calling a single toll-free telephone number. (2) Opt-out methods that are not reasonable and...

12 CFR 334.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2013 CFR

2013-01-01

... or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing... by calling a single toll-free telephone number. (2) Opt-out methods that are not reasonable and...

12 CFR 334.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2014 CFR

2014-01-01

... or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing... by calling a single toll-free telephone number. (2) Opt-out methods that are not reasonable and...

12 CFR 334.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2010 CFR

2010-01-01

... or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing... by calling a single toll-free telephone number. (2) Opt-out methods that are not reasonable and...

12 CFR 571.26 - Delivery of opt-out notices.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Affiliate Marketing § 571.26 Delivery of opt-out notices. (a) In general. The opt-out notice must be... the notice on the Internet Web site at which the consumer obtained a product or service electronically... on an Internet Web site without requiring the consumer to acknowledge receipt of the notice. ...

12 CFR 41.26 - Delivery of opt-out notices.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Affiliate Marketing § 41.26 Delivery of opt-out notices. (a) In general. The opt-out notice must be provided... the notice on the Internet Web site at which the consumer obtained a product or service electronically... on an Internet Web site without requiring the consumer to acknowledge receipt of the notice. ...

The Economics of Notebook Universities

ERIC Educational Resources Information Center

Bryan, John M. S.

2007-01-01

In the fall of 2006, students could purchase an entry-level notebook computer with a 15-inch LCD for $500. This price crossed an important threshold, moving notebooks into the range of consumer electronics--the category of phenomena that fuels mass consumer trends such as cell phones, digital cameras, and iPods. Most colleges and universities…

77 FR 6310 - Electronic Fund Transfers (Regulation E)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-07

... a one-time transfer or the first in a series of preauthorized transfers to occur more than 10 days... disclosures and receipts where a consumer schedules a one-time transfer or the first in a series of... where a consumer schedules a one-time transfer or the first in a series of preauthorized transfers to...

17 CFR 248.7 - Form of opt out notice to consumers; opt out methods.

Code of Federal Regulations, 2010 CFR

2010-04-01

... relationship terminates, the customer's opt out direction continues to apply to the nonpublic personal... establishes a new customer relationship with you, the opt out direction that applied to the former... notice in writing or, if the consumer agrees, electronically. (d) Joint relationships. (1) If two or more...

12 CFR 717.26 - Delivery of opt-out notices.

Code of Federal Regulations, 2012 CFR

2012-01-01

... CREDIT REPORTING Affiliate Marketing § 717.26 Delivery of opt-out notices. (a) In general. The opt-out... of actual notice. A consumer may reasonably be expected to receive actual notice if the affiliate... to a consumer who has agreed to receive electronic disclosures by e-mail from the affiliate providing...

12 CFR 334.26 - Delivery of opt-out notices.

Code of Federal Regulations, 2013 CFR

2013-01-01

... POLICY FAIR CREDIT REPORTING Affiliate Marketing § 334.26 Delivery of opt-out notices. (a) In general... expectation of actual notice. A consumer may reasonably be expected to receive actual notice if the affiliate... to a consumer who has agreed to receive electronic disclosures by e-mail from the affiliate providing...

12 CFR 334.26 - Delivery of opt-out notices.

Code of Federal Regulations, 2014 CFR

2014-01-01

... POLICY FAIR CREDIT REPORTING Affiliate Marketing § 334.26 Delivery of opt-out notices. (a) In general... expectation of actual notice. A consumer may reasonably be expected to receive actual notice if the affiliate... to a consumer who has agreed to receive electronic disclosures by e-mail from the affiliate providing...

12 CFR 717.26 - Delivery of opt-out notices.

Code of Federal Regulations, 2014 CFR

2014-01-01

... CREDIT REPORTING Affiliate Marketing § 717.26 Delivery of opt-out notices. (a) In general. The opt-out... of actual notice. A consumer may reasonably be expected to receive actual notice if the affiliate... to a consumer who has agreed to receive electronic disclosures by e-mail from the affiliate providing...

12 CFR 334.26 - Delivery of opt-out notices.

Code of Federal Regulations, 2012 CFR

2012-01-01

... POLICY FAIR CREDIT REPORTING Affiliate Marketing § 334.26 Delivery of opt-out notices. (a) In general... expectation of actual notice. A consumer may reasonably be expected to receive actual notice if the affiliate... to a consumer who has agreed to receive electronic disclosures by e-mail from the affiliate providing...

12 CFR 717.26 - Delivery of opt-out notices.

Code of Federal Regulations, 2013 CFR

2013-01-01

... CREDIT REPORTING Affiliate Marketing § 717.26 Delivery of opt-out notices. (a) In general. The opt-out... of actual notice. A consumer may reasonably be expected to receive actual notice if the affiliate... to a consumer who has agreed to receive electronic disclosures by e-mail from the affiliate providing...

76 FR 81019 - Electronic Fund Transfers (Regulation E)

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-27

... public comment. SUMMARY: Title X of the Dodd-Frank Wall Street Reform and Consumer Protection Act (Dodd... CFR Part 205. The Dodd-Frank Wall Street Reform and Consumer Protection Act (Dodd-Frank Act) \\1...,'' because it was designed to be informational only and is unnecessary for the implementation of the EFTA, as...

12 CFR 222.21 - Affiliate marketing opt-out and exceptions.

Code of Federal Regulations, 2014 CFR

2014-01-01

....21 Section 222.21 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE... Affiliate marketing opt-out and exceptions. (a) Initial notice and opt-out requirement—(1) In general. You... the consumer in writing or, if the consumer agrees, electronically, in a concise notice that you may...

12 CFR 334.24 - Reasonable opportunity to opt out.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Internet Web site at which the consumer has obtained a product or service. The consumer acknowledges... the time of an electronic transaction, such as a transaction conducted on an Internet Web site. The... indicate that they do not want to opt out. (5) By including in a privacy notice. The opt-out notice is...

Audiotex Information Systems: Answering Consumer Queries Electronically. TDC Research Report No. 5.

ERIC Educational Resources Information Center

Conlan, Sharon; And Others

A 14-month pilot of INFO-U, a fully automated telephone information service, assessed the feasibility of the technology in Minnesota Extension Service (MES) county offices to respond to consumer telephone queries. The project was designed to: (1) explore the potential of regional Extension cooperation and resource sharing; (2) increase recognition…

78 FR 5773 - Foreign-Trade Zone 22-Chicago, IL, Notification of Proposed Production Activity, Panasonic...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-28

... Electronics), Aurora, IL The Illinois International Port District, grantee of FTZ 22, submitted a notification... facility is used for the kitting of consumer electronics parts into retail packages. Pursuant to 15 CFR 400...

Feasibility of Bluetooth Data as a Surrogate Measure of Vehicle Operations : Technical Summary

DOT National Transportation Integrated Search

2012-10-01

The widespread use of portable electronic devices among consumers has allowed new opportunities for traffic data collection. Many of these devices contain short-range Bluetooth radios in addition to other electronic equipment. The included Bluetooth ...

PILOT-SCALE STUDIES ON THE INCINERATION OF ELECTRONICS INDUSTRY WASTE

EPA Science Inventory

The paper describes experiments performed on a pilot-scale rotary kiln incinerator to investigate the emissions and operational behavior during the incineration of consumer electronics waste. These experiments were targeted at destroying the organic components of printed circuit ...

Anaerobic oxidation of ethene coupled to sulfate reduction in microcosms and enrichment cultures.

PubMed

Fullerton, Heather; Crawford, Michael; Bakenne, Ademola; Freedman, David L; Zinder, Stephen H

2013-01-01

Ethene is considered recalcitrant under anaerobic conditions, but biological reduction to ethane and oxidation to CO2 have been reported; however, little is known about these processes or the organisms carrying them out. In this report we describe sulfate dependent ethene consumption in microcosms prepared with sediments from a freshwater canal. A first dose of 0.6 mmol/L ethene was consumed within 77 days, and a second dose was largely consumed twelve days later. Material from this microcosm was transferred into growth medium with ethene as the only electron donor (except for trace amounts of vitamins) and sulfate as the electron acceptor. Four doses of ethene were consumed at increasing rates, and the cultures have been transferred at least eight times in this medium. Conversion of [(14)C]ethene primarily to (14)CO2 was demonstrated in fifth and sixth generation cultures, as well as production of sulfide in other cultures, confirming the ethene/sulfate couple. Ovoid cells 1-2 μm in diameter were found in cultures containing ethene and sulfate, and quantitative PCR showed large increases in bacterial 16S rRNA gene copy number. Over half of a 16S rRNA gene clone library from a sixth-generation culture was a phylotype with a sequence ca. 90% identical with a clade of Deltaproteobacteria that includes Desulfovirga adipica and several Syntrophobacter spp. These studies have solidified the concept that deficits in mass balances for chloroethene fate in sulfate reducing zones of contaminated groundwater sites may be due to ethene oxidation, and suggest a unique phylotype is involved in this process.

Stretchable electronics for wearable and high-current applications

NASA Astrophysics Data System (ADS)

Hilbich, Daniel; Shannon, Lesley; Gray, Bonnie L.

2016-04-01

Advances in the development of novel materials and fabrication processes are resulting in an increased number of flexible and stretchable electronics applications. This evolving technology enables new devices that are not readily fabricated using traditional silicon processes, and has the potential to transform many industries, including personalized healthcare, consumer electronics, and communication. Fabrication of stretchable devices is typically achieved through the use of stretchable polymer-based conductors, or more rigid conductors, such as metals, with patterned geometries that can accommodate stretching. Although the application space for stretchable electronics is extensive, the practicality of these devices can be severely limited by power consumption and cost. Moreover, strict process flows can impede innovation that would otherwise enable new applications. In an effort to overcome these impediments, we present two modified approaches and applications based on a newly developed process for stretchable and flexible electronics fabrication. This includes the development of a metallization pattern stamping process allowing for 1) stretchable interconnects to be directly integrated with stretchable/wearable fabrics, and 2) a process variation enabling aligned multi-layer devices with integrated ferromagnetic nanocomposite polymer components enabling a fully-flexible electromagnetic microactuator for large-magnitude magnetic field generation. The wearable interconnects are measured, showing high conductivity, and can accommodate over 20% strain before experiencing conductive failure. The electromagnetic actuators have been fabricated and initial measurements show well-aligned, highly conductive, isolated metal layers. These two applications demonstrate the versatility of the newly developed process and suggest potential for its furthered use in stretchable electronics and MEMS applications.

Green synthesis of gold nanoparticles using Stevia rebaudiana leaf extracts: Characterization and their stability.

PubMed

Sadeghi, Babak; Mohammadzadeh, M; Babakhani, B

2015-07-01

Various methods invented and developed for the synthesis of gold nanoparticles that increases daily consumed. According to this method, including potential environmental pollution problems and the complexity of the synthesis, in this study, the feasibility of using the leaves extract of Stevia rebaudiana (SR) for the reduction of gold ions to nanoparticles form have been studied. Stevia leaves were used to prepare the aqueous extract for this study. Gold nanoparticles were characterized with different techniques such as UV-vis spectroscopy, FT-IR spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Transmission electron microscopy experiments showed that these nanoparticles are spherical and uniformly distributed and its size is from 5 to 20 nm. FT-IR spectroscopy revealed that gold nanoparticles were functionalized with biomolecules that have primary amine group (NH2), carbonyl group, OH groups and other stabilizing functional groups. X-ray diffraction pattern showed high purity and face centered cubic structure of gold nanoparticles with size of 17 nm. The scanning electron microscopy (SEM) implies the right of forming gold nanoparticles. The results, confirm that gold nanoparticles have synthesized by the leaves extract of S. rebaudiana (SR). Copyright © 2015 Elsevier B.V. All rights reserved.

Consumers with an intellectual disability and carers: perceptions of interactions with banks.

PubMed

Hayes, Susan C; Martin, Fiona B

2007-03-01

As more people with an intellectual disability reside independently in the community, there is both the need and the opportunity for them to use financial services, including banks and credit unions, and products such as cash machine cards, credit cards and loans. There is a dearth of information about interactions between consumers with intellectual disabilities and their carers, and financial service providers. This study investigated the perceptions of 94 consumers with an intellectual disability and 53 carers regarding interactions with financial service providers. Consumers and carers mentioned a number of problems with banks, and reported a low rate of successful resolution of these difficulties. Carers mentioned more problems than consumers, and more frequently reported intangible problems such as discrimination. The 'digital divide' was evident, with few consumers having access to Internet or telephone banking. People with intellectual disabilities need education programmes about electronic banking, their rights as consumers and their access to problem resolution strategies.

Satisfying patient-consumer principles for health information exchange: evidence from California case studies.

PubMed

Miller, Robert H

2012-03-01

In June 2010 sixteen organizations representing California patients and consumers adopted nine principles for electronically exchanging health information among and within provider organizations. The principles were formulated with the goal of improving patient and population health care by increasing the availability and use of patient data while protecting patients' privacy. This study assesses to what extent five health care organizations-all in different stages of increasing their capacity for health information exchange-conformed to the principles in early 2011. Although an increasing amount of electronic data has been exchanged among organizations and with patients, progress has been modest, and patients still have little control over their data. For organizations to comply with all nine patient and consumer principles, clear "rules of the road" for information sharing must be defined, and patient education in health information exchange and control over personal data must be increased.

Automated integration of continuous glucose monitor data in the electronic health record using consumer technology.

PubMed

Kumar, Rajiv B; Goren, Nira D; Stark, David E; Wall, Dennis P; Longhurst, Christopher A

2016-05-01

The diabetes healthcare provider plays a key role in interpreting blood glucose trends, but few institutions have successfully integrated patient home glucose data in the electronic health record (EHR). Published implementations to date have required custom interfaces, which limit wide-scale replication. We piloted automated integration of continuous glucose monitor data in the EHR using widely available consumer technology for 10 pediatric patients with insulin-dependent diabetes. Establishment of a passive data communication bridge via a patient's/parent's smartphone enabled automated integration and analytics of patient device data within the EHR between scheduled clinic visits. It is feasible to utilize available consumer technology to assess and triage home diabetes device data within the EHR, and to engage patients/parents and improve healthcare provider workflow. © The Author 2016. Published by Oxford University Press on behalf of the American Medical Informatics Association.

Using Consumer Electronics and Apps in Industrial Environments - Development of a Framework for Dynamic Feature Deployment and Extension by Using Apps on Field Devices

NASA Astrophysics Data System (ADS)

Schmitt, Mathias

2014-12-01

The aim of this paper is to give a preliminary insight regarding the current work in the field of mobile interaction in industrial environments by using established interaction technologies and metaphors from the consumer goods industry. The major objective is the development and implementation of a holistic app-framework, which enables dynamic feature deployment and extension by using mobile apps on industrial field devices. As a result, field device functionalities can be updated and adapted effectively in accordance with well-known appconcepts from consumer electronics to comply with the urgent requirements of more flexible and changeable factory systems of the future. In addition, a much more user-friendly and utilizable interaction with field devices can be realized. Proprietary software solutions and device-stationary user interfaces can be overcome and replaced by uniform, cross-vendor solutions

From electronic consumer products to e-wastes: Global outlook, waste quantities, recycling challenges.

PubMed

Tansel, Berrin

2017-01-01

Advancements in technology, materials development, and manufacturing processes have changed the consumer products and composition of municipal solid waste (MSW) since 1960s. Increasing quantities of discarded consumer products remain a major challenge for recycling efforts, especially for discarded electronic products (also referred as e-waste). The growing demand for high tech products has increased the e-waste quantities and its cross boundary transport globally. This paper reviews the challenges associated with increasing e-waste quantities. The increasing need for raw materials (especially for rare earth and minor elements) and unregulated e-waste recycling operations in developing and underdeveloped counties contribute to the growing concerns for e-waste management. Although the markets for recycled materials are increasing; there are major challenges for development of the necessary infrastructure for e-waste management and accountability as well as development of effective materials recovery technologies and product design. Copyright © 2016 Elsevier Ltd. All rights reserved.

Consumer protection act for digital products

NASA Astrophysics Data System (ADS)

Hampel, Viktor E.

1996-03-01

This report proposes a `Consumer Protection Act for Digital Products' to support electronic commerce and to control the increasing abuse and lack of security on the national information highways. Patterned after the `Food and Drug Act of 1906 (21 USC)' and subsequent legislation, a new agency similar to that of the FDA would have the authority `to develop administrative policy with regard to the safety, effectiveness, and labeling of digital products and their communications for human use, and to review and evaluate new applications of such products.' Specifically, it is proposed that standards, originally developed by the defense industry for the labeling, enveloping, and authentication of digital products delivered to the Government, be extended to promote global electronic commerce by protecting the intellectual property rights of producers, establishing their liability for the end-use of digital products, and give consumers means for informed decision making and purchase.

A randomised controlled trial of a consumer-focused e-health strategy for cardiovascular risk management in primary care: the Consumer Navigation of Electronic Cardiovascular Tools (CONNECT) study protocol.

PubMed

Redfern, Julie; Usherwood, T; Harris, M F; Rodgers, A; Hayman, N; Panaretto, K; Chow, C; Lau, A Y S; Neubeck, L; Coorey, G; Hersch, F; Heeley, E; Patel, A; Jan, S; Zwar, N; Peiris, D

2014-01-31

Fewer than half of all people at highest risk of a cardiovascular event are receiving and adhering to best practice recommendations to lower their risk. In this project, we examine the role of an e-health-assisted consumer-focused strategy as a means of overcoming these gaps between evidence and practice. Consumer Navigation of Electronic Cardiovascular Tools (CONNECT) aims to test whether a consumer-focused e-health strategy provided to Aboriginal and Torres Strait Islander and non-indigenous adults, recruited through primary care, at moderate-to-high risk of a cardiovascular disease event will improve risk factor control when compared with usual care. Randomised controlled trial of 2000 participants with an average of 18 months of follow-up to evaluate the effectiveness of an integrated consumer-directed e-health portal on cardiovascular risk compared with usual care in patients with cardiovascular disease or who are at moderate-to-high cardiovascular disease risk. The trial will be augmented by formal economic and process evaluations to assess acceptability, equity and cost-effectiveness of the intervention. The intervention group will participate in a consumer-directed e-health strategy for cardiovascular risk management. The programme is electronically integrated with the primary care provider's software and will include interactive smart phone and Internet platforms. The primary outcome is a composite endpoint of the proportion of people meeting the Australian guideline-recommended blood pressure (BP) and cholesterol targets. Secondary outcomes include change in mean BP and fasting cholesterol levels, proportion meeting BP and cholesterol targets separately, self-efficacy, health literacy, self-reported point prevalence abstinence in smoking, body mass index and waist circumference, self-reported physical activity and self-reported medication adherence. Primary ethics approval was received from the University of Sydney Human Research Ethics Committee and the Aboriginal Health and Medical Research Council. Results will be disseminated via the usual scientific forums including peer-reviewed publications and presentations at international conferences ACTRN12613000715774.

76 FR 44279 - Implementation of Section 304 of the Telecommunications Act of 1996: Commercial Availability of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-25

... Availability of Navigation Devices; Compatibility Between Cable Systems and Consumer Electronics Equipment... electronics equipment. DATES: The amendments to 47 CFR 76.1205(b)(1), 76.1205(b)(1)(i), 76.1205(b)(2), 76.1205...

Remodelling Marketing Communications in an Internet Environment.

ERIC Educational Resources Information Center

Rowley, Jennifer

2001-01-01

Argues that the Internet demands a significant review of approaches to marketing communications, or promotion, as both the strategic and tactical levels. Highlights include electronic business and electronic commerce; comparing organizational and consumer markets; service development; objectives of marketing communications; and questions for…

Respiration Strategies Utilized by the Gill Endosymbiont from the Host Lucinid Codakia orbicularis (Bivalvia: Lucinidae)

PubMed Central

Duplessis, Melinda R.; Ziebis, Wiebke; Gros, Olivier; Caro, Audrey; Robidart, Julie; Felbeck, Horst

2004-01-01

The large tropical lucinid clam Codakia orbicularis has a symbiotic relationship with intracellular, sulfide-oxidizing chemoautotrophic bacteria. The respiration strategies utilized by the symbiont were explored using integrative techniques on mechanically purified symbionts and intact clam-symbiont associations along with habitat analysis. Previous work on a related symbiont species found in the host lucinid Lucinoma aequizonata showed that the symbionts obligately used nitrate as an electron acceptor, even under oxygenated conditions. In contrast, the symbionts of C. orbicularis use oxygen as the primary electron acceptor while evidence for nitrate respiration was lacking. Direct measurements obtained by using microelectrodes in purified symbiont suspensions showed that the symbionts consumed oxygen; this intracellular respiration was confirmed by using the redox dye CTC (5-cyano-2,3-ditolyl tetrazolium chloride). In the few intact chemosymbioses tested in previous studies, hydrogen sulfide production was shown to occur when the animal-symbiont association was exposed to anoxia and elemental sulfur stored in the thioautotrophic symbionts was proposed to serve as an electron sink in the absence of oxygen and nitrate. However, this is the first study to show by direct measurements using sulfide microelectrodes in enriched symbiont suspensions that the symbionts are the actual source of sulfide under anoxic conditions. PMID:15240294

Thermal imaging diagnostics of high-current electron beams.

PubMed

Pushkarev, A; Kholodnaya, G; Sazonov, R; Ponomarev, D

2012-10-01

The thermal imaging diagnostics of measuring pulsed electron beam energy density is presented. It provides control of the electron energy spectrum and a measure of the density distribution of the electron beam cross section, the spatial distribution of electrons with energies in the selected range, and the total energy of the electron beam. The diagnostics is based on the thermal imager registration of the imaging electron beam thermal print in a material with low bulk density and low thermal conductivity. Testing of the thermal imaging diagnostics has been conducted on a pulsed electron accelerator TEU-500. The energy of the electrons was 300-500 keV, the density of the electron current was 0.1-0.4 kA/cm(2), the duration of the pulse (at half-height) was 60 ns, and the energy in the pulse was up to 100 J. To register the thermal print, a thermal imager Fluke-Ti10 was used. Testing showed that the sensitivity of a typical thermal imager provides the registration of a pulsed electron beam heat pattern within one pulse with energy density over 0.1 J/cm(2) (or with current density over 10 A/cm(2), pulse duration of 60 ns and electron energy of 400 keV) with the spatial resolution of 0.9-1 mm. In contrast to the method of using radiosensitive (dosimetric) materials, thermal imaging diagnostics does not require either expensive consumables, or plenty of processing time.

Gm-Realization of Controlled-Gain Current Follower Transconductance Amplifier

PubMed Central

Tangsrirat, Worapong

2013-01-01

This paper describes the conception of the current follower transconductance amplifier (CFTA) with electronically and linearly current tunable. The newly modified element is realized based on the use of transconductance cells (G m s) as core circuits. The advantage of this element is that the current transfer ratios (i z/i p and i x/i z) can be tuned electronically and linearly by adjusting external DC bias currents. The circuit is designed and analyzed in 0.35 μm TSMC CMOS technology. Simulation results for the circuit with ±1.25 V supply voltages show that it consumes only 0.43 mw quiescent power with 70 MHz bandwidth. As an application example, a current-mode KHN biquad filter is designed and simulated. PMID:24381513

Developing Online Trust in Electronic Commerce: A Generational Cohort Study in Puerto Rico

ERIC Educational Resources Information Center

Lopez Rivera, Ibrahim

2016-01-01

Developing online trust is crucial for e-commerce vendors in order to attract consumers and develop long-term relationships with existing ones. We intended to investigate if consumers from different generational cohorts differ on how they develop online trust when utilizing e-commerce websites. Through the analysis of empirical data collected from…

12 CFR Supplement I to Part 205 - Official Staff Interpretations

Code of Federal Regulations, 2013 CFR

2013-01-01

...) encoding to initiate a one-time ACH debit. For example, if a consumer authorizes a one-time ACH debit from... electronic terminal is involved at the time of the transaction, if the consumer's asset account is... receive a notice that the transaction will be processed as an EFT for each transaction at POS or each time...

12 CFR Supplement I to Part 205 - Official Staff Interpretations

Code of Federal Regulations, 2014 CFR

2014-01-01

...) encoding to initiate a one-time ACH debit. For example, if a consumer authorizes a one-time ACH debit from... electronic terminal is involved at the time of the transaction, if the consumer's asset account is... receive a notice that the transaction will be processed as an EFT for each transaction at POS or each time...

12 CFR Appendix B to Part 30 - Interagency Guidelines Establishing Information Security Standards

Code of Federal Regulations, 2014 CFR

2014-01-01

... any record about an individual, whether in paper, electronic, or other form, that is a consumer report... term does not include any record that does not identify an individual. i. Examples. (1) Consumer... individual who applies for but does not receive a loan, including any loan sought by an individual for a...

12 CFR Appendix B to Part 30 - Interagency Guidelines Establishing Information Security Standards

Code of Federal Regulations, 2013 CFR

2013-01-01

... any record about an individual, whether in paper, electronic, or other form, that is a consumer report... term does not include any record that does not identify an individual. i. Examples. (1) Consumer... individual who applies for but does not receive a loan, including any loan sought by an individual for a...

The Influence of Typeface on Students' Perceptions of Online Instructors

ERIC Educational Resources Information Center

Louch, Michelle O'Brien; Stork, Elizabeth

2014-01-01

At its base, advertising is the process of using visual images and words to attract and convince consumers that a certain product has certain attributes. The same effect exists in electronic communication, strongly so in online courses where most if not all interaction between instructor and student is in writing. Arguably, if consumers make…

Experimental demonstration of distributed feedback semiconductor lasers based on reconstruction-equivalent-chirp technology.

PubMed

Li, Jingsi; Wang, Huan; Chen, Xiangfei; Yin, Zuowei; Shi, Yuechun; Lu, Yanqing; Dai, Yitang; Zhu, Hongliang

2009-03-30

In this paper we report, to the best of our knowledge, the first experimental realization of distributed feedback (DFB) semiconductor lasers based on reconstruction-equivalent-chirp (REC) technology. Lasers with different lasing wavelengths are achieved simultaneously on one chip, which shows a potential for the REC technology in combination with the photonic integrated circuits (PIC) technology to be a possible method for monolithic integration, in that its fabrication is as powerful as electron beam technology and the cost and time-consuming are almost the same as standard holographic technology.

Insights on alterations to the rumen ecosystem by nitrate and nitrocompounds

USDA-ARS?s Scientific Manuscript database

Nitrate and certain short chain nitrocompounds are being investigated as dietary supplements to reduce economic and environmental costs associated with ruminal methane emissions. Thermodynamically, nitrate is a preferred electron acceptor in the rumen that consumes electrons at the expense of metha...

Patient Perceptions of Electronic Health Records

ERIC Educational Resources Information Center

Lulejian, Armine

2011-01-01

Research objective. Electronic Health Records (EHR) are expected to transform the way medicine is delivered with patients/consumers being the intended beneficiaries. However, little is known regarding patient knowledge and attitudes about EHRs. This study examined patient perceptions about EHR. Study design. Surveys were administered following…

What Do Digital Books Mean for Libraries?

ERIC Educational Resources Information Center

Lynch, Clifford

2001-01-01

Discusses digital books, or electronic books, and their relationship to libraries and communication between authors and readers. Topics include the scholarly market, for academic libraries, versus the consumer market; textbooks versus novels; digitization of older books; marketing; costs; and electronic books versus printed books. (LRW)

Practical procedure for discriminating monofloral honey with a broad pollen profile variability using an electronic tongue.

PubMed

Sousa, Mara E B C; Dias, Luís G; Veloso, Ana C A; Estevinho, Letícia; Peres, António M; Machado, Adélio A S C

2014-10-01

Colour and floral origin are key parameters that may influence the honey market. Monofloral light honey are more demanded by consumers, mainly due to their flavour, being more valuable for producers due to their higher price when compared to darker honey. The latter usually have a high anti-oxidant content that increases their healthy potential. This work showed that it is possible to correctly classify monofloral honey with a high variability in floral origin with a potentiometric electronic tongue after making a preliminary selection of honey according their colours: white, amber and dark honey. The results showed that the device had a very satisfactory sensitivity towards floral origin (Castanea sp., Echium sp., Erica sp., Lavandula sp., Prunus sp. and Rubus sp.), allowing a leave-one-out cross validation correct classification of 100%. Therefore, the E-tongue shows potential to be used at analytical laboratory level for honey samples classification according to market and quality parameters, as a practical tool for ensuring monofloral honey authenticity. Copyright © 2014 Elsevier B.V. All rights reserved.

Interaction between photosynthetic electron transport and chloroplast sinks triggers protection and signalling important for plant productivity

PubMed Central

Gollan, Peter J.; Lima-Melo, Yugo; Tiwari, Arjun; Tikkanen, Mikko

2017-01-01

The photosynthetic light reactions provide energy that is consumed and stored in electron sinks, the products of photosynthesis. A balance between light reactions and electron consumption in the chloroplast is vital for plants, and is protected by several photosynthetic regulation mechanisms. Photosystem I (PSI) is particularly susceptible to photoinhibition when these factors become unbalanced, which can occur in low temperatures or in high light. In this study we used the pgr5 Arabidopsis mutant that lacks ΔpH-dependent regulation of photosynthetic electron transport as a model to study the consequences of PSI photoinhibition under high light. We found that PSI damage severely inhibits carbon fixation and starch accumulation, and attenuates enzymatic oxylipin synthesis and chloroplast regulation of nuclear gene expression after high light stress. This work shows that modifications to regulation of photosynthetic light reactions, which may be designed to improve yield in crop plants, can negatively impact metabolism and signalling, and thereby threaten plant growth and stress tolerance. This article is part of the themed issue ‘Enhancing photosynthesis in crop plants: targets for improvement’. PMID:28808104

Life cycle assessment of post-consumer plastics production from waste electrical and electronic equipment (WEEE) treatment residues in a Central European plastics recycling plant.

PubMed

Wäger, Patrick A; Hischier, Roland

2015-10-01

Plastics play an increasingly important role in reaching the recovery and recycling rates defined in the European WEEE Directive. In a recent study we have determined the life cycle environmental impacts of post-consumer plastics production from mixed, plastics-rich WEEE treatment residues in the Central European plant of a market-leading plastics recycler, both from the perspective of the customers delivering the residues and the customers buying the obtained post-consumer recycled plastics. The results of our life cycle assessments, which were extensively tested with sensitivity analyses, show that from both perspectives plastics recycling is clearly superior to the alternatives considered in this study (i.e. municipal solid waste incineration (MSWI) and virgin plastics production). For the three ReCiPe endpoint damage categories, incineration in an MSWI plant results in an impact exceeding that of the examined plastics recycling facility each by about a factor of 4, and the production of virgin plastics has an impact exceeding that of the post-consumer recycled (PCR) plastics production each by a factor of 6-10. On a midpoint indicator level the picture is more differentiated, showing that the environmental impacts of the recycling options are lower by 50% and more for almost all impact factors. While this provides the necessary evidence for the environmental benefits of plastics recycling compared to existing alternatives, it can, however, not be taken as conclusive evidence. To be conclusive, future research will have to address the fate of hazardous substances in the outputs of such recycling systems in more detail. Copyright © 2015 Elsevier B.V. All rights reserved.

Alice in Debitland.

ERIC Educational Resources Information Center

Board of Governors of the Federal Reserve System, Washington, DC.

Designed for the general public and possibly suitable also for high school economics students, this booklet examines the Electronic Fund Transfer Act (EFT), which protects consumers who use debit cards for the electronic transfer of funds. This commercially adapted version of the character in "Alice in Wonderland," uses a story-teller…

Nudging to prevent the purchase of incompatible digital products online: An experimental study.

PubMed

Esposito, Gabriele; Hernández, Penélope; van Bavel, René; Vila, José

2017-01-01

Ensuring safe and satisfactory online shopping activity, especially among vulnerable consumers such as elderly and less educated citizens, is part of a larger set of consumer policy objectives seeking to strengthen trust in the electronic marketplace. This article contributes to that goal by testing the effectiveness of nudges intended to prevent the purchase of 'incompatible' digital products (i.e., those which cannot be used with the devices owned by consumers or the systems they operate). We ran a computerised lab experiment (n = 626) examining three types of nudges, the effects of age and education, and interaction effects between these variables and the nudges. Results show that emotive warning messages and placing incompatibility information at the checkout page rather than earlier in the purchasing process were effective in reducing the purchase of incompatible goods. Age was also a relevant factor: older participants were more likely to purchase incompatible goods. In addition, there was an interaction effect between all nudges and age: two nudges exacerbated the effect of age, while another mitigated it. These results suggest nudges can be an effective policy tool, confirm a generational gap in online behaviour, and highlight how nudges can moderate the effect of socio-demographic variables.

Electronic neural network for dynamic resource allocation

NASA Technical Reports Server (NTRS)

Thakoor, A. P.; Eberhardt, S. P.; Daud, T.

1991-01-01

A VLSI implementable neural network architecture for dynamic assignment is presented. The resource allocation problems involve assigning members of one set (e.g. resources) to those of another (e.g. consumers) such that the global 'cost' of the associations is minimized. The network consists of a matrix of sigmoidal processing elements (neurons), where the rows of the matrix represent resources and columns represent consumers. Unlike previous neural implementations, however, association costs are applied directly to the neurons, reducing connectivity of the network to VLSI-compatible 0 (number of neurons). Each row (and column) has an additional neuron associated with it to independently oversee activations of all the neurons in each row (and each column), providing a programmable 'k-winner-take-all' function. This function simultaneously enforces blocking (excitatory/inhibitory) constraints during convergence to control the number of active elements in each row and column within desired boundary conditions. Simulations show that the network, when implemented in fully parallel VLSI hardware, offers optimal (or near-optimal) solutions within only a fraction of a millisecond, for problems up to 128 resources and 128 consumers, orders of magnitude faster than conventional computing or heuristic search methods.

Nudging to prevent the purchase of incompatible digital products online: An experimental study

PubMed Central

Esposito, Gabriele; Hernández, Penélope; van Bavel, René; Vila, José

2017-01-01

Ensuring safe and satisfactory online shopping activity, especially among vulnerable consumers such as elderly and less educated citizens, is part of a larger set of consumer policy objectives seeking to strengthen trust in the electronic marketplace. This article contributes to that goal by testing the effectiveness of nudges intended to prevent the purchase of 'incompatible' digital products (i.e., those which cannot be used with the devices owned by consumers or the systems they operate). We ran a computerised lab experiment (n = 626) examining three types of nudges, the effects of age and education, and interaction effects between these variables and the nudges. Results show that emotive warning messages and placing incompatibility information at the checkout page rather than earlier in the purchasing process were effective in reducing the purchase of incompatible goods. Age was also a relevant factor: older participants were more likely to purchase incompatible goods. In addition, there was an interaction effect between all nudges and age: two nudges exacerbated the effect of age, while another mitigated it. These results suggest nudges can be an effective policy tool, confirm a generational gap in online behaviour, and highlight how nudges can moderate the effect of socio-demographic variables. PMID:28282401

Determinants affecting consumer adoption of contactless credit card: an empirical study.

PubMed

Wang, Yu-Min

2008-12-01

The contactless credit card is one of the most promising technological innovations in the field of electronic payments. It provides consumers with greater control of payments, convenience, and transaction speed. However, contactless credit cards have yet to gain significant rates of adoption in the marketplace. Thus, effort must be made to identify factors affecting consumer adoption of contactless credit cards. Based on the technology acceptance model, innovation diffusion theory, and the relevant literature, seven variables (perceived usefulness, perceived ease of use, compatibility, perceived risk, trust, consumer involvement, availability of infrastructure) are proposed to help predict consumer adoption of contactless credit cards. Data collected from 312 respondents in Taiwan is tested against the proposed prediction model using the logistic regression approach. The results and implications of our study contribute to an expanded understanding of the factors that affect consumer adoption of contactless credit cards.

Electronic neuroprocessors

NASA Technical Reports Server (NTRS)

Thakoor, Anil

1991-01-01

The JPL Center for Space Microelectronics Technology (CSMT) is actively pursuing research in the neural network theory, algorithms, and electronics as well as optoelectronic neural net hardware implementations, to explore the strengths and application potential for a variety of NASA, DoD, as well as commercial application problems, where conventional computing techniques are extremely time-consuming, cumbersome, or simply non-existent. An overview of the JPL electronic neural network hardware development activities and some of the striking applications of the JPL electronic neuroprocessors are presented.

Electronic Resource Management 2.0: Using Web 2.0 Technologies as Cost-Effective Alternatives to an Electronic Resource Management System

ERIC Educational Resources Information Center

Murray, Adam

2008-01-01

Designed to assist with the management of e-resources, electronic resource management (ERM) systems are time- and fund-consuming to purchase and maintain. Questions of system compatibility, data population, and workflow design/redesign can be difficult to answer; sometimes those answers are not what we'd prefer to hear. The two primary functions…

The Involvement of Hydrogen-producing and ATP-dependent NADPH-consuming Pathways in Setting the Redox Poise in the Chloroplast of Chlamydomonas reinhardtii in Anoxia

PubMed Central

Clowez, Sophie; Godaux, Damien; Cardol, Pierre; Wollman, Francis-André; Rappaport, Fabrice

2015-01-01

Photosynthetic microalgae are exposed to changing environmental conditions. In particular, microbes found in ponds or soils often face hypoxia or even anoxia, and this severely impacts their physiology. Chlamydomonas reinhardtii is one among such photosynthetic microorganisms recognized for its unusual wealth of fermentative pathways and the extensive remodeling of its metabolism upon the switch to anaerobic conditions. As regards the photosynthetic electron transfer, this remodeling encompasses a strong limitation of the electron flow downstream of photosystem I. Here, we further characterize the origin of this limitation. We show that it stems from the strong reducing pressure that builds up upon the onset of anoxia, and this pressure can be relieved either by the light-induced synthesis of ATP, which promotes the consumption of reducing equivalents, or by the progressive activation of the hydrogenase pathway, which provides an electron transfer pathway alternative to the CO2 fixation cycle. PMID:25691575

Development of a flexible and bendable vibrotactile actuator based on wave-shaped poly(vinyl chloride)/acetyl tributyl citrate gels for wearable electronic devices

NASA Astrophysics Data System (ADS)

Park, Won-Hyeong; Bae, Jin Woo; Shin, Eun-Jae; Kim, Sang-Youn

2016-11-01

The paradigm of consumer electronic devices is being shifted from rigid hand-held devices to flexible/wearable devices in search of benefits such as enhanced usability and portability, excellent wear characteristics, and more functions in less space. However, the fundamental incompatibility of flexible/wearable devices and a rigid actuator brought forth a new issue obstructing commercialization of flexible/wearable devices. In this paper, we propose a new wave-shaped eco-friendly PVC gel, and a new flexible and bendable vibrotactile actuator that could easily be applied to wearable electronic devices. We explain the vibration mechanism of the proposed vibrotactile actuator and investigate its influence on the content of plasticizer for the performance of the proposed actuator. An experiment for measuring vibrational amplitude was conducted over a wide frequency range. The experiment clearly showed that the proposed vibrotactile actuator could create a variety of haptic sensations in wearable devices.

Fabrication, characterization, and modeling of a biodegradable battery for transient electronics

NASA Astrophysics Data System (ADS)

Edupuganti, Vineet; Solanki, Raj

2016-12-01

Traditionally, emphasis has been placed on durable, long-lasting electronics. However, electronics that are meant to intentionally degrade over time can actually have significant practical applications. Biodegradable, or transient, electronics would open up opportunities in the field of medical implants, where the need for surgical removal of devices could be eliminated. Environmental sensors and, eventually, consumer electronics would also greatly benefit from this technology. An essential component of transient electronics is the battery, which serves as a biodegradable power source. This work involves the fabrication, characterization, and modeling of a magnesium-based biodegradable battery. Galvanostatic discharge tests show that an anode material of magnesium alloy AZ31 extends battery lifetime by over six times, as compared to pure magnesium. With AZ31, the maximum power and capacity of the fabricated device are 67 μW and 5.2 mAh, respectively, though the anode area is just 0.8 cm2. The development of an equivalent circuit model provided insight into the battery's behavior by extracting fitting parameters from experimental data. The model can accurately simulate device behavior, taking into account its intentional degradation. The size of the device and the power it produces are in accordance with typical levels for low-power transient systems.

The personal health record: consumers banking on their health.

PubMed

Ball, Marion J; Costin, Melinda Y; Lehmann, Christoph

2008-01-01

With personal health records (PHRs) acting much like ATM cards, increasingly wired consumers can "bank on health", accessing their own personal health information and a wide array of services. Consumer-owned, the PHR is dependent upon the existence of the legal electronic medical record (EMR) and interoperability. Working PHRs are in place in Veterans Health Administration, private health care institutions, and in the commercial sector. By allowing consumers to become involved in their own care, the PHR creates new roles and relationships. New tools change the clinician's workflow and thought flow, and pose new challenges for consumers. Key components of the PHR include the EMR and regional health information organizations (RHIOs); key strategies focus on human factors in successful project management. Online resources provided by the National Library of Medicine and Health On the Net help address consumer needs for information that is reliable and understandable. The growth of self-management tools adds to the challenge and the promise of PHRs for clinicians and consumers alike.

Fungicide residue identification and discrimination using a conducting polymer electronic-nose

Treesearch

Alphus D. Wilson

2013-01-01

The identification of fungicide residues on crop foliage is necessary to make periodic pest management decisions. The determination of fungicide residue identities currently is difficult and time consuming using conventional chemical analysis methods such as gas chromatography-mass spectroscopy. Different fungicide types produce unique electronic aroma signature...

Predicting Stored Grain Insect Population Densities Using an Electronic Probe Trap

USDA-ARS?s Scientific Manuscript database

Manual sampling of insects in stored grain is a laborious and time consuming process. Automation of grain sampling should help to increase the adoption of stored-grain integrated pest management. A new commercial electronic grain probe trap (OPI Insector™) has recently been marketed. We field tested...

Electronic Money.

ERIC Educational Resources Information Center

Schilling, Tim

Thirty years ago a cashless society was predicted for the near future; paper currency and checks would be an antiquated symbol of the past. Consumers would embrace a new alternative for making payments: electronic money. But currency is still used for 87% of payments, mainly for "nickel and dime" purchases. And checks are the payment…

Making Technology Work for Scholarship: Investing in the Data.

ERIC Educational Resources Information Center

Hockey, Susan

This paper examines issues related to how providers and consumers can make the best use of electronic information, focusing on the humanities. Topics include: new technology or old; electronic text and data formats; Standard Generalized Markup Language (SGML); text encoding initiative; encoded archival description (EAD); other applications of…

A Model for Web-based Information Systems in E-Retailing.

ERIC Educational Resources Information Center

Wang, Fang; Head, Milena M.

2001-01-01

Discusses the use of Web-based information systems (WIS) by electronic retailers to attract and retain consumers and deliver business functions and strategy. Presents an abstract model for WIS design in electronic retailing; discusses customers, business determinants, and business interface; and suggests future research. (Author/LRW)

Exploding the Black Box: Personal Computing, the Notebook Battery Crisis, and Postindustrial Systems Thinking.

PubMed

Eisler, Matthew N

Historians of science and technology have generally ignored the role of power sources in the development of consumer electronics. In this they have followed the predilections of historical actors. Research, development, and manufacturing of batteries has historically occurred at a social and intellectual distance from the research, development, and manufacturing of the devices they power. Nevertheless, power source technoscience should properly be understood as an allied yet estranged field of electronics. The separation between the fields has had important consequences for the design and manufacturing of mobile consumer electronics. This paper explores these dynamics in the co-construction of notebook batteries and computers. In so doing, it challenges assumptions of historians and industrial engineers and planners about the nature of computer systems in particular and the development of technological systems. The co-construction of notebook computers and batteries, and the occasional catastrophic failure of their compatibility, challenges systems thinking more generally.

Japan's technology and manufacturing infrastructure

NASA Astrophysics Data System (ADS)

Boulton, William R.; Meieran, Eugene S.; Tummala, Rao R.

1995-02-01

The JTEC panel found that, after four decades of development in electronics and manufacturing technologies, Japanese electronics companies are leaders in the development, support, and management of complex, low-cost packaging and assembly technologies used in the production of a broad range of consumer electronics products. The electronics industry's suppliers provide basic materials and equipment required for electronic packaging applications. Panelists concluded that some Japanese firms could be leading U.S. competitors by as much as a decade in these areas. Japan's technology and manufacturing infrastructure is an integral part of its microelectronics industry's success.

Japan's technology and manufacturing infrastructure

NASA Technical Reports Server (NTRS)

Boulton, William R.; Meieran, Eugene S.; Tummala, Rao R.

1995-01-01

The JTEC panel found that, after four decades of development in electronics and manufacturing technologies, Japanese electronics companies are leaders in the development, support, and management of complex, low-cost packaging and assembly technologies used in the production of a broad range of consumer electronics products. The electronics industry's suppliers provide basic materials and equipment required for electronic packaging applications. Panelists concluded that some Japanese firms could be leading U.S. competitors by as much as a decade in these areas. Japan's technology and manufacturing infrastructure is an integral part of its microelectronics industry's success.

Consumer input into health care: Time for a new active and comprehensive model of consumer involvement.

PubMed

Hall, Alix E; Bryant, Jamie; Sanson-Fisher, Rob W; Fradgley, Elizabeth A; Proietto, Anthony M; Roos, Ian

2018-03-07

To ensure the provision of patient-centred health care, it is essential that consumers are actively involved in the process of determining and implementing health-care quality improvements. However, common strategies used to involve consumers in quality improvements, such as consumer membership on committees and collection of patient feedback via surveys, are ineffective and have a number of limitations, including: limited representativeness; tokenism; a lack of reliable and valid patient feedback data; infrequent assessment of patient feedback; delays in acquiring feedback; and how collected feedback is used to drive health-care improvements. We propose a new active model of consumer engagement that aims to overcome these limitations. This model involves the following: (i) the development of a new measure of consumer perceptions; (ii) low cost and frequent electronic data collection of patient views of quality improvements; (iii) efficient feedback to the health-care decision makers; and (iv) active involvement of consumers that fosters power to influence health system changes. © 2018 The Authors Health Expectations published by John Wiley & Sons Ltd.

Toward Enhancing the Social Benefits of Electronic Publishing. Report of an Aspen Institute Planning Meeting (Queenstown, Maryland, February 25-26, 1987). Communications and Society Forum Report #1.

ERIC Educational Resources Information Center

Rice, Michael

Intended to investigate ways in which electronic publishing might be further developed to serve important consumer needs and social interests that have yet to become a focus for the industry, this two-day planning meeting consisted of roundtable discussions with 16 electronic publishing experts and practitioners. Following a presentation of the…

Mechanically Milled Irregular Zinc Nanoparticles for Printable Bioresorbable Electronics.

PubMed

Mahajan, Bikram K; Yu, Xiaowei; Shou, Wan; Pan, Heng; Huang, Xian

2017-05-01

Bioresorbable electronics is predominantly realized by complex and time-consuming anhydrous fabrication processes. New technology explores printable methods using inks containing micro- or nano-bioresorbable particles (e.g., Zn and Mg). However, these particles have seldom been obtained in the context of bioresorbable electronics using cheap, reliable, and effective approaches with limited study on properties essential to printable electronics. Here, irregular nanocrystalline Zn with controllable sizes and optimized electrical performance is obtained through ball milling approach using polyvinylpyrrolidone (PVP) as a process control agent to stabilize Zn particles and prevent cold welding. Time and PVP dependence of the ball milled particles are studied with systematic characterizations of morphology and composition of the nanoparticles. The results reveal crystallized Zn nanoparticles with a size of ≈34.834 ± 1.76 nm and low surface oxidation. The resulting Zn nanoparticles can be readily printed onto bioresorbable substrates and sintered at room temperature using a photonic sintering approach, leading to a high conductivity of 44 643 S m -1 for printable zinc nanoparticles. The techniques to obtain Zn nanoparticles through ball milling and processing them through photonic sintering may potentially lead to a mass fabrication method for bioresorbable electronics and promote its applications in healthcare, environmental protection, and consumer electronics. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The Electronic Dilemma of TV Advertising: Documentation, The Reactions of Business, Cultural Consequences and Consumer Implications. Working Paper No. 2.

ERIC Educational Resources Information Center

Sepstrup, Preben

This discussion of the influence of advertising on the development of new media covers ways in which advertising uses the media and the implications of new information technologies for consumers and marketing activities. The first of four sections describes how television advertising has been altered by the development of new technologies--cable,…

16 CFR 680.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2011 CFR

2011-01-01

... a form that can be electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that...-out under the Act, by a single method, such as by calling a single toll-free telephone number. (2) Opt...

16 CFR 680.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2012 CFR

2012-01-01

... a form that can be electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that...-out under the Act, by a single method, such as by calling a single toll-free telephone number. (2) Opt...

16 CFR 680.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2013 CFR

2013-01-01

... a form that can be electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that...-out under the Act, by a single method, such as by calling a single toll-free telephone number. (2) Opt...

16 CFR 680.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2010 CFR

2010-01-01

... a form that can be electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that...-out under the Act, by a single method, such as by calling a single toll-free telephone number. (2) Opt...

16 CFR 680.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2014 CFR

2014-01-01

... a form that can be electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that...-out under the Act, by a single method, such as by calling a single toll-free telephone number. (2) Opt...

The Future of Research Publishing: The eReport and eJournal.

ERIC Educational Resources Information Center

Krantz, Murray

2003-01-01

Considers the future of online publication of scientific journals and how electronic research reports (eReports) and electronic research journals (eJournals) will change the way research is reported, disseminated, consumed, and conducted by the scientific community. Suggests there will be a more interactive dynamic discourse between authors and…

77 FR 26674 - Enhancement of Electricity Market Surveillance and Analysis Through Ongoing Electronic Delivery...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-07

...; Order No. 760] Enhancement of Electricity Market Surveillance and Analysis Through Ongoing Electronic... ensure just and reasonable rates. \\1\\ 16 U.S.C. 825(b), 825f(a). II. Background 2. Wholesale electricity... consumers.\\4\\ \\2\\ A more in-depth discussion of developments in wholesale electricity markets--which no...

Consumer Health Informatics--integrating patients, providers, and professionals online.

PubMed

Klein-Fedyshin, Michele S

2002-01-01

Consumer Health Informatics (CHI) means different things to patients, health professionals, and health care systems. A broader perspective on this new and rapidly developing field will enable us to understand and better apply its advances. This article provides an overview of CHI discussing its evolution and driving forces, along with advanced applications such as Personal Health Records, Internet transmission of personal health data, clinical e-mail, online pharmacies, and shared decision-making tools. Consumer Health Informatics will become integrated with medical care, electronic medical records, and patient education to impact the whole process and business of health care.

Electric Energy Management in the Smart Home: Perspectives on Enabling Technologies and Consumer Behavior

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zipperer, Adam; Aloise-Young, Patricia A.; Suryanarayanan, Siddharth

2013-11-01

Smart homes hold the potential for increasing energy efficiency, decreasing costs of energy use, decreasing the carbon footprint by including renewable resources, and transforming the role of the occupant. At the crux of the smart home is an efficient electric energy management system that is enabled by emerging technologies in the electric grid and consumer electronics. This article presents a discussion of the state-of-the-art in electricity management in smart homes, the various enabling technologies that will accelerate this concept, and topics around consumer behavior with respect to energy usage.

Electric Energy Management in the Smart Home: Perspectives on Enabling Technologies and Consumer Behavior

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zipperer, A.; Aloise-Young, P. A.; Suryanarayanan, S.

2013-08-01

Smart homes hold the potential for increasing energy efficiency, decreasing costs of energy use, decreasing the carbon footprint by including renewable resources, and trans-forming the role of the occupant. At the crux of the smart home is an efficient electric energy management system that is enabled by emerging technologies in the electricity grid and consumer electronics. This article presents a discussion of the state-of-the-art in electricity management in smart homes, the various enabling technologies that will accelerate this concept, and topics around consumer behavior with respect to energy usage.

Dynamic Pricing in Electronic Commerce Using Neural Network

NASA Astrophysics Data System (ADS)

Ghose, Tapu Kumar; Tran, Thomas T.

In this paper, we propose an approach where feed-forward neural network is used for dynamically calculating a competitive price of a product in order to maximize sellers’ revenue. In the approach we considered that along with product price other attributes such as product quality, delivery time, after sales service and seller’s reputation contribute in consumers purchase decision. We showed that once the sellers, by using their limited prior knowledge, set an initial price of a product our model adjusts the price automatically with the help of neural network so that sellers’ revenue is maximized.

The continuous reinvention of diffractive optics

NASA Astrophysics Data System (ADS)

Kress, Bernard C.

2004-02-01

We show in this paper how the field of diffractive optics has moved during these past twenty years from academic research to main stream industry and consumer electronics. We analyze the main driving forces, the various enabling technologies and techniques for both design, fabrication and mass production of diffractive optics, and the successive markets in which this technology has been able to provide economically viable solutions to specific industrials needs. More specifically, we will see how niche applications making use of special features of diffractive optics seem to survive the applications involving the same diffractives, issued from the successive main technology driven investment bubbles.

CMOS-Compatible SOI MESFETS for Radiation-Hardened DC-to-DC Converters

NASA Technical Reports Server (NTRS)

Thornton, Trevor; Lepkowski, William; Wilk, Seth

2013-01-01

A radiation-tolerant transistor switch has been developed that can operate between 196 and +150 C for DC-to-DC power conversion applications. A prototype buck regulator component was demonstrated to be performing well after a total ionizing dose of 300 krad(Si). The prototype buck converters showed good efficiencies at ultra-high switching speeds in the range of 1 to 10 MHz. Such high switching frequency will enable smaller, lighter buck converters to be developed as part of the next project. Switching regulators are widely used in commercial applications including portable consumer electronics.

E-WOM Review Adoption: Consumers’ Demographic Profile Influence on Green Purchase Intention

NASA Astrophysics Data System (ADS)

Rahim, Roslin Abdul; Sulaiman, Zuraidah; Chin, Thoo Ai; Arif, Mohd Shoki Mohd; Hamid, Mohd Hakim Abdul

2017-06-01

Nowadays, green products are getting popular in their acceptance by the Malaysian consumers. Due to the advancement of the Internet technologies and the wide spread of electronic word of mouth (E-WOM), consumers seem to be more influenced in purchasing the green products. In this study, consumers’ demographic profiles, such as age, gender, income, education background, and occupation are being explored to investigate their influences on consumers’ green product purchase intention. The purpose of this paper is to showcase the results of the differences between several demographic profile groups on green product purchase intention using descriptive analysis, ANOVA and independent sample T-Test. T-test results showed that there is a statistically significant difference between gender on consumers’ green product purchase intention. Meanwhile, the results generated by ANOVA indicated that there are no significant differences between age, income, education background and occupation on consumers’ green product purchase intention. These results shed light on the potential market segment that should be targeted by marketers and producers of green products in Malaysia.

Research strategies for safety evaluation of nanomaterials, part VII: evaluating consumer exposure to nanoscale materials.

PubMed

Thomas, Treye; Thomas, Karluss; Sadrieh, Nakissa; Savage, Nora; Adair, Patricia; Bronaugh, Robert

2006-05-01

Considerable media attention has recently been given to novel applications for products that contain nanoscale materials. These products could have utility in several industries that market consumer products, including textiles, sporting equipment, cosmetics, consumer electronics, and household cleaners. Some of the purported benefits of these products include improved performance, convenience, lower cost, as well as other desirable features, when compared to the conventional products that do not contain nanoscale materials. Although there are numerous likely consumer advantages from products containing nanoscale materials, there is very little information available regarding consumer exposure to the nanoscale materials in these products or any associated risks from these exposures. This paper seeks to review a limited subset of products that contain nanoscale materials, assess the available data for evaluating the consumer exposures and potential hazards associated with these products, and discuss the capacity of U.S. regulatory agencies to address the potential risks associated with these products.

Research on the Influence of Perceived Risk in Consumer On-line Purchasing Decision

NASA Astrophysics Data System (ADS)

Hong, Zhao; Yi, Li

Perceived risk is an important factor that affects consumer's on-line shopping purchasing decision, through the perceived theories the consumer can know clearly which step owns higher risk in the whole shopping process, then learn how to prevent it, this process also strengthen the consumer confidence, thus lowering to know that the risk adjudicate to the feeling, so the essay has important and realistic meaning for further expand the electronic commerce. At first, investigate, collect, tidy up, analyze the questionnaire information, and thus get the primary data. Finally try to find out the influence of perceived risk to each stage of purchasing decision during consumer on-line shopping process with data and personal analytical. The paper is a complement to the local and existing perceived theories. The result of the study manifests that, the order of main perceived risks which felt by consumer during on-line shopping process are as follow: financial risk, the performance risk and service risk.

Perceived Compatibility and the Adoption of B2C E-Commerce by Non-buyers

NASA Astrophysics Data System (ADS)

Hernández-García, Ángel; Iglesias-Pradas, Santiago; Chaparro-Peláez, Julián; Pascual-Miguel, Félix

The purpose of this article is to study the factors which affect the intention to buy online for users who have never made any prior purchase using the electronic channel, with special focus to the role of perceived compatibility. To do so, an adoption model for e-commerce was proposed on the basis of the Technology Adoption Model (TAM) and the Innovations Diffusion Theory (IDT). In order to validate the model, data gathered amongst Spanish consumers who had no experience using e-commerce, were analyzed using the partial least squares (PLS) method. The results have demonstrated the importance of perceived compatibility as a significant factor to foster non-buyers' adoption of electronic business-to-consumer e-commerce (eB2C).

Factors associated with the hospital admission of consumer product-related injuries treated in U.S. hospital emergency departments.

PubMed

Schroeder, Thomas J; Rodgers, Gregory B

2013-10-01

While unintentional injuries and hazard patterns involving consumer products have been studied extensively in recent years, little attention has focused on the characteristics of those who are hospitalized after treatment in emergency departments, as opposed to those treated and released. This study quantifies the impact of the age and sex of the injury victims, and other factors, on the likelihood of hospitalization. The analysis focuses on consumer product injuries, and was based on approximately 400,000 injury cases reported through the U.S. Consumer Product Safety Commission's National Electronic Injury Surveillance System, a national probability sample of U.S. hospital emergency departments. Logistic regression was used to quantify the factors associated with the likelihood of hospitalization. The analysis suggests a smooth U-shaped relationship between the age of the victim and the likelihood of hospitalization, declining from about 3.4% for children under age 5 years to 1.9% for 15-24 year-olds, but then rising to more than 25% for those ages 75 years and older. The likelihood of hospitalization was also significantly affected by the victim's sex, as well as by the types of products involved, fire involvement, and the size and type of hospital at which the injury was treated. This study shows that the probability of hospitalization is strongly correlated with the characteristics of those who are injured, as well as other factors. Published by Elsevier Ltd.

A methodology for evaluating the usability of audiovisual consumer electronic products.

PubMed

Kwahk, Jiyoung; Han, Sung H

2002-09-01

Usability evaluation is now considered an essential procedure in consumer product development. Many studies have been conducted to develop various techniques and methods of usability evaluation hoping to help the evaluators choose appropriate methods. However, planning and conducting usability evaluation requires considerations of a number of factors surrounding the evaluation process including the product, user, activity, and environmental characteristics. In this perspective, this study suggested a new methodology of usability evaluation through a simple, structured framework. The framework was outlined by three major components: the interface features of a product as design variables, the evaluation context consisting of user, product, activity, and environment as context variables, and the usability measures as dependent variables. Based on this framework, this study established methods to specify the product interface features, to define evaluation context, and to measure usability. The effectiveness of this methodology was demonstrated through case studies in which the usability of audiovisual products was evaluated by using the methods developed in this study. This study is expected to help the usability practitioners in consumer electronics industry in various ways. Most directly, it supports the evaluators' plan and conduct usability evaluation sessions in a systematic and structured manner. In addition, it can be applied to other categories of consumer products (such as appliances, automobiles, communication devices, etc.) with minor modifications as necessary.

12 CFR 41.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2012 CFR

2012-01-01

... means to opt out, such as a form that can be electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free... affiliate marketing opt-out under the Act, by a single method, such as by calling a single toll-free...

12 CFR 571.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2014 CFR

2014-01-01

... out, such as a form that can be electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that...-out under the Act, by a single method, such as by calling a single toll-free telephone number. (2) Opt...

12 CFR 571.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2013 CFR

2013-01-01

... out, such as a form that can be electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that...-out under the Act, by a single method, such as by calling a single toll-free telephone number. (2) Opt...

12 CFR 41.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2013 CFR

2013-01-01

... means to opt out, such as a form that can be electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free... affiliate marketing opt-out under the Act, by a single method, such as by calling a single toll-free...

12 CFR 571.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2011 CFR

2011-01-01

... out, such as a form that can be electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that...-out under the Act, by a single method, such as by calling a single toll-free telephone number. (2) Opt...

12 CFR 41.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2014 CFR

2014-01-01

... means to opt out, such as a form that can be electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free... affiliate marketing opt-out under the Act, by a single method, such as by calling a single toll-free...

12 CFR 41.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2010 CFR

2010-01-01

... means to opt out, such as a form that can be electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free... affiliate marketing opt-out under the Act, by a single method, such as by calling a single toll-free...

12 CFR 571.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2010 CFR

2010-01-01

... out, such as a form that can be electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that...-out under the Act, by a single method, such as by calling a single toll-free telephone number. (2) Opt...

12 CFR 571.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2012 CFR

2012-01-01

... out, such as a form that can be electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that...-out under the Act, by a single method, such as by calling a single toll-free telephone number. (2) Opt...

12 CFR 41.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2011 CFR

2011-01-01

... means to opt out, such as a form that can be electronically mailed or processed at an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free... affiliate marketing opt-out under the Act, by a single method, such as by calling a single toll-free...

12 CFR 205.16 - Disclosures at automated teller machines.

Code of Federal Regulations, 2010 CFR

2010-01-01

... which a consumer initiates an electronic fund transfer or a balance inquiry and that does not hold the account to or from which the transfer is made, or about which an inquiry is made. (b) General. An... transfer or a balance inquiry shall: (1) Provide notice that a fee will be imposed for providing electronic...

Validity of electronic diet recording nutrient estimates compared to dietitian analysis of diet records: A randomized controlled trial

USDA-ARS?s Scientific Manuscript database

Background: Dietary intake assessment with diet records (DR) is a standard research and practice tool in nutrition. Manual entry and analysis of DR is time-consuming and expensive. New electronic tools for diet entry by clients and research participants may reduce the cost and effort of nutrient int...

Electronic Payment System in Nigeria: Its Economic Benefits and Challenges

ERIC Educational Resources Information Center

Okifo, Joseph; Igbunu, Richard

2015-01-01

The crux of this study is on the adoption of E-payment system in Nigeria: Its economic benefits and challenges. The arrival of the internet has taken electronic payments and transactions to an exponential growth level. Consumers could purchase goods and services from the internet and send unencrypted credit card numbers across the network, which…

Face classification using electronic synapses

NASA Astrophysics Data System (ADS)

Yao, Peng; Wu, Huaqiang; Gao, Bin; Eryilmaz, Sukru Burc; Huang, Xueyao; Zhang, Wenqiang; Zhang, Qingtian; Deng, Ning; Shi, Luping; Wong, H.-S. Philip; Qian, He

2017-05-01

Conventional hardware platforms consume huge amount of energy for cognitive learning due to the data movement between the processor and the off-chip memory. Brain-inspired device technologies using analogue weight storage allow to complete cognitive tasks more efficiently. Here we present an analogue non-volatile resistive memory (an electronic synapse) with foundry friendly materials. The device shows bidirectional continuous weight modulation behaviour. Grey-scale face classification is experimentally demonstrated using an integrated 1024-cell array with parallel online training. The energy consumption within the analogue synapses for each iteration is 1,000 × (20 ×) lower compared to an implementation using Intel Xeon Phi processor with off-chip memory (with hypothetical on-chip digital resistive random access memory). The accuracy on test sets is close to the result using a central processing unit. These experimental results consolidate the feasibility of analogue synaptic array and pave the way toward building an energy efficient and large-scale neuromorphic system.

The application of quasi-steady approximation in atomic kinetics in simulation of hohlraum radiation drive

NASA Astrophysics Data System (ADS)

Ren, Guoli; Pei, Wenbing; Lan, Ke; Gu, Peijun; Li, Xin; Institute of Applied Physics; Computional Mathematics Team

2011-10-01

In current routine 2D simulation of hohlraum physics, we adopt the principal-quantum- number(n-level) average atom model(AAM). However, the experimental frequency-dependant radiative drive differs from our n-level simulated drive, which reminds us the need of a more detailed atomic kinetics description. The orbital-quantum-number(nl-level) AAM is a natural consideration but the in-line calculation consumes much more resources. We use a new method to built up a nl-level bound electron distribution using in-line n-level calculated plasma condition (such as temperature, density, average ionization degree). We name this method ``quasi-steady approximation.'' Using the re-built nl-level bound electron distribution (Pnl) , we acquire a new hohlraum radiative drive by post-processing. Comparison with the n-level post-processed hohlraum drive shows that we get an almost identical radiation flux but with more-detailed frequency-dependant structures.

Face classification using electronic synapses.

PubMed

Yao, Peng; Wu, Huaqiang; Gao, Bin; Eryilmaz, Sukru Burc; Huang, Xueyao; Zhang, Wenqiang; Zhang, Qingtian; Deng, Ning; Shi, Luping; Wong, H-S Philip; Qian, He

2017-05-12

Conventional hardware platforms consume huge amount of energy for cognitive learning due to the data movement between the processor and the off-chip memory. Brain-inspired device technologies using analogue weight storage allow to complete cognitive tasks more efficiently. Here we present an analogue non-volatile resistive memory (an electronic synapse) with foundry friendly materials. The device shows bidirectional continuous weight modulation behaviour. Grey-scale face classification is experimentally demonstrated using an integrated 1024-cell array with parallel online training. The energy consumption within the analogue synapses for each iteration is 1,000 × (20 ×) lower compared to an implementation using Intel Xeon Phi processor with off-chip memory (with hypothetical on-chip digital resistive random access memory). The accuracy on test sets is close to the result using a central processing unit. These experimental results consolidate the feasibility of analogue synaptic array and pave the way toward building an energy efficient and large-scale neuromorphic system.

An area and power-efficient analog li-ion battery charger circuit.

PubMed

Do Valle, Bruno; Wentz, Christian T; Sarpeshkar, Rahul

2011-04-01

The demand for greater battery life in low-power consumer electronics and implantable medical devices presents a need for improved energy efficiency in the management of small rechargeable cells. This paper describes an ultra-compact analog lithium-ion (Li-ion) battery charger with high energy efficiency. The charger presented here utilizes the tanh basis function of a subthreshold operational transconductance amplifier to smoothly transition between constant-current and constant-voltage charging regimes without the need for additional area- and power-consuming control circuitry. Current-domain circuitry for end-of-charge detection negates the need for precision-sense resistors in either the charging path or control loop. We show theoretically and experimentally that the low-frequency pole-zero nature of most battery impedances leads to inherent stability of the analog control loop. The circuit was fabricated in an AMI 0.5-μm complementary metal-oxide semiconductor process, and achieves 89.7% average power efficiency and an end voltage accuracy of 99.9% relative to the desired target 4.2 V, while consuming 0.16 mm(2) of chip area. To date and to the best of our knowledge, this design represents the most area-efficient and most energy-efficient battery charger circuit reported in the literature.

Is there any legal and scientific basis for classifying electronic cigarettes as medications?

PubMed

Farsalinos, Konstantinos E; Stimson, Gerry V

2014-05-01

The rapid growth in the use of electronic cigarettes has been accompanied by substantial discussions by governments, international organisations, consumers and public health experts about how they might be regulated. In the European Union they are currently regulated under consumer legislation but new legislation will regulate them under the Tobacco Products Directive. However, several countries have sought to regulate them under medicines regulations. These claims have been successfully challenged in 6 court cases in European states. Under European legislation a product may be deemed to be a medicine by function if it is used in or administered to human beings either with a view to restoring, correcting or modifying physiological functions by exerting a pharmacological, immunological or metabolic action, or to making a medical diagnosis. It is a medicine by presentation if it is presented (e.g. by a manufacturer or distributor) as having properties for treating or preventing disease in human beings. We assess the legal and scientific basis for the claim that electronic cigarettes should be regulated as medicines. We conclude that they are neither medicine by function nor necessarily by presentation The main reason for their existence is as a harm reduction product in which the liking for and/or dependence on nicotine is maintained, and adoption of use is as a substitute for smoking and not as a smoking cessation product. In reality, they are used as consumer products providing pleasure to the user. They are not used to treat nicotine addiction or other disease, but to enable continued use of nicotine. Their use is adjusted individually by each consumer according to his or her perceived pleasure and satisfaction. Gaps in current regulation regarding safety and quality can be met by tailored regulations. Copyright © 2014 Elsevier B.V. All rights reserved.

A repeatedly refuelable mediated biofuel cell based on a hierarchical porous carbon electrode

NASA Astrophysics Data System (ADS)

Fujita, Shuji; Yamanoi, Shun; Murata, Kenichi; Mita, Hiroki; Samukawa, Tsunetoshi; Nakagawa, Takaaki; Sakai, Hideki; Tokita, Yuichi

2014-05-01

Biofuel cells that generate electricity from renewable fuels, such as carbohydrates, must be reusable through repeated refuelling, should these devices be used in consumer electronics. We demonstrate the stable generation of electricity from a glucose-powered mediated biofuel cell through multiple refuelling cycles. This refuelability is achieved by immobilizing nicotinamide adenine dinucleotide (NAD), an electron-transfer mediator, and redox enzymes in high concentrations on porous carbon particles constituting an anode while maintaining their electrochemical and enzymatic activities after the immobilization. This bioanode can be refuelled continuously for more than 60 cycles at 1.5 mA cm-2 without significant potential drop. Cells assembled with these bioanodes and bilirubin-oxidase-based biocathodes can be repeatedly used to power a portable music player at 1 mW cm-3 through 10 refuelling cycles. This study suggests that the refuelability within consumer electronics should facilitate the development of long and repeated use of the mediated biofuel cells as well as of NAD-based biosensors, bioreactors, and clinical applications.

A repeatedly refuelable mediated biofuel cell based on a hierarchical porous carbon electrode.

PubMed

Fujita, Shuji; Yamanoi, Shun; Murata, Kenichi; Mita, Hiroki; Samukawa, Tsunetoshi; Nakagawa, Takaaki; Sakai, Hideki; Tokita, Yuichi

2014-05-13

Biofuel cells that generate electricity from renewable fuels, such as carbohydrates, must be reusable through repeated refuelling, should these devices be used in consumer electronics. We demonstrate the stable generation of electricity from a glucose-powered mediated biofuel cell through multiple refuelling cycles. This refuelability is achieved by immobilizing nicotinamide adenine dinucleotide (NAD), an electron-transfer mediator, and redox enzymes in high concentrations on porous carbon particles constituting an anode while maintaining their electrochemical and enzymatic activities after the immobilization. This bioanode can be refuelled continuously for more than 60 cycles at 1.5 mA cm(-2) without significant potential drop. Cells assembled with these bioanodes and bilirubin-oxidase-based biocathodes can be repeatedly used to power a portable music player at 1 mW cm(-3) through 10 refuelling cycles. This study suggests that the refuelability within consumer electronics should facilitate the development of long and repeated use of the mediated biofuel cells as well as of NAD-based biosensors, bioreactors, and clinical applications.

A repeatedly refuelable mediated biofuel cell based on a hierarchical porous carbon electrode

PubMed Central

Fujita, Shuji; Yamanoi, Shun; Murata, Kenichi; Mita, Hiroki; Samukawa, Tsunetoshi; Nakagawa, Takaaki; Sakai, Hideki; Tokita, Yuichi

2014-01-01

Biofuel cells that generate electricity from renewable fuels, such as carbohydrates, must be reusable through repeated refuelling, should these devices be used in consumer electronics. We demonstrate the stable generation of electricity from a glucose-powered mediated biofuel cell through multiple refuelling cycles. This refuelability is achieved by immobilizing nicotinamide adenine dinucleotide (NAD), an electron-transfer mediator, and redox enzymes in high concentrations on porous carbon particles constituting an anode while maintaining their electrochemical and enzymatic activities after the immobilization. This bioanode can be refuelled continuously for more than 60 cycles at 1.5 mA cm−2 without significant potential drop. Cells assembled with these bioanodes and bilirubin-oxidase-based biocathodes can be repeatedly used to power a portable music player at 1 mW cm−3 through 10 refuelling cycles. This study suggests that the refuelability within consumer electronics should facilitate the development of long and repeated use of the mediated biofuel cells as well as of NAD-based biosensors, bioreactors, and clinical applications. PMID:24820210

Case study on risk evaluation of printed electronics using nanosilver ink.

PubMed

Kim, Ellen; Lee, Ji Hyun; Kim, Jin Kwon; Lee, Gun Ho; Ahn, Kangho; Park, Jung Duck; Yu, Il Je

2016-01-01

With the ever-increasing development of nanotechnology, our society is being surrounded by possible risks related to exposure to manufactured nanomaterials. The consumer market already includes many products that contain silver nanoparticles (AgNPs), including various household products, such as yoga mats, cutting boards, running shirts, and socks. There is a growing concern over the release of AgNPs in workplaces related to the manufacture and application of nanomaterials. This study investigated the release of AgNPs during the operation of a printed electronics printer. Using an exposure simulation chamber, a nanoparticle collector, scanning mobility particle sizer (SMPS), condensation particle counter (CPC), dust monitor, and mixed cellulose ester (MCE) filters are all connected to measure the AgNP exposure levels when operating a printed electronics printer. A very small amount of AgNPs was released during the operation of the printed electronics printer, and the number of AgNPs inside the exposure simulation chamber was lower than that outside background. In addition, when evaluating the potential risks for consumers and workers using a margin of exposure (MOE) approach and target MOE of 1000, the operational results far exceeded the target MOE in this simulation study and in a previous workplace exposure study. The overall results indicate a no-risk concern level in the case of printed electronics using nanosilver ink.

Hematite Reduction Buffers Acid Generation and Enhances Nutrient Uptake by a Fermentative Iron Reducing Bacterium, Orenia metallireducens Strain Z6.

PubMed

Dong, Yiran; Sanford, Robert A; Chang, Yun-Juan; McInerney, Michael J; Fouke, Bruce W

2017-01-03

Fermentative iron-reducing organisms have been identified in a variety of environments. Instead of coupling iron reduction to respiration, they have been consistently observed to use ferric iron minerals as an electron sink for fermentation. In the present study, a fermentative iron reducer, Orenia metallireducens strain Z6, was shown to use iron reduction to enhance fermentation not only by consuming electron equivalents, but also by generating alkalinity that effectively buffers the pH. Fermentation of glucose by this organism in the presence of a ferric oxide mineral, hematite (Fe 2 O 3 ), resulted in enhanced glucose decomposition compared with fermentation in the absence of an iron source. Parallel evidence (i.e., genomic reconstruction, metabolomics, thermodynamic analyses, and calculation of electron transfer) suggested hematite reduction as a proton-consuming reaction effectively consumed acid produced by fermentation. The buffering effect of hematite was further supported by a greater extent of glucose utilization by strain Z6 in media with increasing buffer capacity. Such maintenance of a stable pH through hematite reduction for enhanced glucose fermentation complements the thermodynamic interpretation of interactions between microbial iron reduction and other biogeochemical processes. This newly discovered feature of iron reducer metabolism also has significant implications for groundwater management and contaminant remediation by providing microbially mediated buffering systems for the associated microbial and/or chemical reactions.

The iPod Experiments: Michael Stephens Investigates Ways that Librarians Are Using This Popular Consumer Device

ERIC Educational Resources Information Center

Stephens, Michael

2005-01-01

No other consumer electronic device has created such an impact on popular culture in recent years as the Apple iPod. Since iPod's release in November 2001, music fans have been able to carry upwards of 15,000 song files on those sleek devices with their trendy white headphones. Over ten million iPods have been sold--nearly half of them in the last…

Defining Data Access Pathways for Atmosphere to Electrons Wind Energy Data

NASA Astrophysics Data System (ADS)

Macduff, M.; Sivaraman, C.

2016-12-01

Atmosphere to Electrons (A2e), is a U.S. Department of Energy (DOE) Wind Program research initiative designed to optimize the performance of wind power plants by lowering the levelized cost of energy (LCOE). The Data Archive and Portal (DAP), managed by PNNL and hosted on Amazon Web Services, is a key capability of the A2e initiative. The DAP is used to collect, store, catalog, preserve and disseminate results from the experimental and computational studies representing a diverse user community requiring both open and proprietary data archival solutions(http://a2e.pnnl.gov). To enable consumer access to the data in DAP it is being built on a set of API's that are publically accessible. This includes persistent references for key meta-data objects as well as authenticated access to the data itself. The goal is to make the DAP catalog visible through a variety of data access paths bringing the data and metadata closer to the consumer. By providing persistent metadata records we hope to be able to build services that capture consumer utility and make referencing datasets easier.

Nickel electrodes as a cheap and versatile platform for studying structure and function of immobilized redox proteins.

PubMed

Han, Xiao Xia; Li, Junbo; Öner, Ibrahim Halil; Zhao, Bing; Leimkühler, Silke; Hildebrandt, Peter; Weidinger, Inez M

2016-10-19

Practical use of many bioelectronic and bioanalytical devices is limited by the need of expensive materials and time consuming fabrication. Here we demonstrate the use of nickel electrodes as a simple and cheap solid support material for bioelectronic applications. The naturally nanostructured electrodes showed a surprisingly high electromagnetic surface enhancement upon light illumination such that immobilization and electron transfer reactions of the model redox proteins cytochrome b 5 (Cyt b 5 ) and cytochrome c (Cyt c) could be followed via surface enhanced resonance Raman spectroscopy. It could be shown that the nickel surface, when used as received, promotes a very efficient binding of the proteins upon preservation of their native structure. The immobilized redox proteins could efficiently exchange electrons with the electrode and could even act as an electron relay between the electrode and solubilized myoglobin. Our results open up new possibility for nickel electrodes as an exceptional good support for bioelectronic devices and biosensors on the one hand and for surface enhanced spectroscopic investigations on the other hand. Copyright © 2016 Elsevier B.V. All rights reserved.

Spin orbit torque based electronic neuron

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sengupta, Abhronil, E-mail: asengup@purdue.edu; Choday, Sri Harsha; Kim, Yusung

2015-04-06

A device based on current-induced spin-orbit torque (SOT) that functions as an electronic neuron is proposed in this work. The SOT device implements an artificial neuron's thresholding (transfer) function. In the first step of a two-step switching scheme, a charge current places the magnetization of a nano-magnet along the hard-axis, i.e., an unstable point for the magnet. In the second step, the SOT device (neuron) receives a current (from the synapses) which moves the magnetization from the unstable point to one of the two stable states. The polarity of the synaptic current encodes the excitatory and inhibitory nature of themore » neuron input and determines the final orientation of the magnetization. A resistive crossbar array, functioning as synapses, generates a bipolar current that is a weighted sum of the inputs. The simulation of a two layer feed-forward artificial neural network based on the SOT electronic neuron shows that it consumes ∼3× lower power than a 45 nm digital CMOS implementation, while reaching ∼80% accuracy in the classification of 100 images of handwritten digits from the MNIST dataset.« less

Microbial utilization of electrically reduced neutral red as the sole electron donor for growth and metabolite production

DOE Office of Scientific and Technical Information (OSTI.GOV)

Park, D.H.; Laivenieks, M.; Guettler, M.V.

1999-07-01

Electrically reduced neutral red (NR) served as the sole source of reducing power for growth and metabolism of pure and mixed cultures of H[sub 2]-consuming bacteria in a novel electrochemical bioreactor system. NR was continuously reduced by the cathodic potential ([minus]1.5 V) generated from an electric current (0.3 to 1.0 mA), and it was subsequently oxidized by Actinobacillus succinogenes or by mixed methanogenic cultures. The A. succinogenes mutant strain FZ-6 did not grow on fumarate alone unless electrically reduced NR or hydrogen was present as the electron donor for succinate production. The mutant strain, unlike the wild type, lacked pyruvatemore » formate lyase and formate dehydrogenase. Electrically reduced NR also replaced hydrogen as the sole electron donor source for growth and production of methane from CO[sub 2]. These results show that both pure and mixed cultures can function as electrochemical devices when electrically generated reducing power can be used to drive metabolism. The potential utility of utilizing electrical reducing power in enhancing industrial fermentations or biotransformation processes is discussed.« less

One-electron oxidation of individual DNA bases and DNA base stacks.

PubMed

Close, David M

2010-02-04

In calculations performed with DFT there is a tendency of the purine cation to be delocalized over several bases in the stack. Attempts have been made to see if methods other than DFT can be used to calculate localized cations in stacks of purines, and to relate the calculated hyperfine couplings with known experimental results. To calculate reliable hyperfine couplings it is necessary to have an adequate description of spin polarization which means that electron correlation must be treated properly. UMP2 theory has been shown to be unreliable in estimating spin densities due to overestimates of the doubles correction. Therefore attempts have been made to use quadratic configuration interaction (UQCISD) methods to treat electron correlation. Calculations on the individual DNA bases are presented to show that with UQCISD methods it is possible to calculate hyperfine couplings in good agreement with the experimental results. However these UQCISD calculations are far more time-consuming than DFT calculations. Calculations are then extended to two stacked guanine bases. Preliminary calculations with UMP2 or UQCISD theory on two stacked guanines lead to a cation localized on a single guanine base.

Chemoelectronic circuits based on metal nanoparticles

NASA Astrophysics Data System (ADS)

Yan, Yong; Warren, Scott C.; Fuller, Patrick; Grzybowski, Bartosz A.

2016-07-01

To develop electronic devices with novel functionalities and applications, various non-silicon-based materials are currently being explored. Nanoparticles have unique characteristics due to their small size, which can impart functions that are distinct from those of their bulk counterparts. The use of semiconductor nanoparticles has already led to improvements in the efficiency of solar cells, the processability of transistors and the sensitivity of photodetectors, and the optical and catalytic properties of metal nanoparticles have led to similar advances in plasmonics and energy conversion. However, metals screen electric fields and this has, so far, prevented their use in the design of all-metal nanoparticle circuitry. Here, we show that simple electronic circuits can be made exclusively from metal nanoparticles functionalized with charged organic ligands. In these materials, electronic currents are controlled by the ionic gradients of mobile counterions surrounding the ‘jammed’ nanoparticles. The nanoparticle-based electronic elements of the circuitry can be interfaced with metal nanoparticles capable of sensing various environmental changes (humidity, gas, the presence of various cations), creating electronic devices in which metal nanoparticles sense, process and ultimately report chemical signals. Because the constituent nanoparticles combine electronic and chemical sensing functions, we term these systems ‘chemoelectronic’. The circuits have switching times comparable to those of polymer electronics, selectively transduce parts-per-trillion chemical changes into electrical signals, perform logic operations, consume little power (on the scale of microwatts), and are mechanically flexible. They are also ‘green’, in the sense that they comprise non-toxic nanoparticles cast at room temperature from alcohol solutions.

Chemoelectronic circuits based on metal nanoparticles.

PubMed

Yan, Yong; Warren, Scott C; Fuller, Patrick; Grzybowski, Bartosz A

2016-07-01

To develop electronic devices with novel functionalities and applications, various non-silicon-based materials are currently being explored. Nanoparticles have unique characteristics due to their small size, which can impart functions that are distinct from those of their bulk counterparts. The use of semiconductor nanoparticles has already led to improvements in the efficiency of solar cells, the processability of transistors and the sensitivity of photodetectors, and the optical and catalytic properties of metal nanoparticles have led to similar advances in plasmonics and energy conversion. However, metals screen electric fields and this has, so far, prevented their use in the design of all-metal nanoparticle circuitry. Here, we show that simple electronic circuits can be made exclusively from metal nanoparticles functionalized with charged organic ligands. In these materials, electronic currents are controlled by the ionic gradients of mobile counterions surrounding the 'jammed' nanoparticles. The nanoparticle-based electronic elements of the circuitry can be interfaced with metal nanoparticles capable of sensing various environmental changes (humidity, gas, the presence of various cations), creating electronic devices in which metal nanoparticles sense, process and ultimately report chemical signals. Because the constituent nanoparticles combine electronic and chemical sensing functions, we term these systems 'chemoelectronic'. The circuits have switching times comparable to those of polymer electronics, selectively transduce parts-per-trillion chemical changes into electrical signals, perform logic operations, consume little power (on the scale of microwatts), and are mechanically flexible. They are also 'green', in the sense that they comprise non-toxic nanoparticles cast at room temperature from alcohol solutions.

Meet EPA Scientist Diana Bless

EPA Pesticide Factsheets

EPA chemical engineer Diana Bless works on sustainable materials management research for rare earth elements in consumer electronics and approaches related to characterization, source control and treatment of mining-influenced waters.

Process analysis of recycled thermoplasts from consumer electronics by laser-induced plasma spectroscopy.

PubMed

Fink, Herbert; Panne, Ulrich; Niessner, Reinhard

2002-09-01

An experimental setup for direct elemental analysis of recycled thermoplasts from consumer electronics by laser-induced plasma spectroscopy (LIPS, or laser-induced breakdown spectroscopy, LIBS) was realized. The combination of a echelle spectrograph, featuring a high resolution with a broad spectral coverage, with multivariate methods, such as PLS, PCR, and variable subset selection via a genetic algorithm, resulted in considerable improvements in selectivity and sensitivity for this complex matrix. With a normalization to carbon as internal standard, the limits of detection were in the ppm range. A preliminary pattern recognition study points to the possibility of polymer recognition via the line-rich echelle spectra. Several experiments at an extruder within a recycling plant demonstrated successfully the capability of LIPS for different kinds of routine on-line process analysis.

Optical gesture sensing and depth mapping technologies for head-mounted displays: an overview

NASA Astrophysics Data System (ADS)

Kress, Bernard; Lee, Johnny

2013-05-01

Head Mounted Displays (HMDs), and especially see-through HMDs have gained renewed interest in recent time, and for the first time outside the traditional military and defense realm, due to several high profile consumer electronics companies presenting their products to hit market. Consumer electronics HMDs have quite different requirements and constrains as their military counterparts. Voice comments are the de-facto interface for such devices, but when the voice recognition does not work (not connection to the cloud for example), trackpad and gesture sensing technologies have to be used to communicate information to the device. We review in this paper the various technologies developed today integrating optical gesture sensing in a small footprint, as well as the various related 3d depth mapping sensors.

Microelectronics in Japan

NASA Astrophysics Data System (ADS)

Boulton, William R.

1995-02-01

The purpose of this JTEC study is to evaluate Japan's electronic manufacturing and packaging capabilities within the context of global economic competition. To carry out this study, the JTEC panel evaluated the framework of the Japanese consumer electronics industry and various technological and organizational factors that are likely to determine who will win and lose in the marketplace. This study begins with a brief overview of the electronics industry, especially as it operates in Japan today. Succeeding chapters examine the electronics infrastructure in Japan and take an in-depth look at the central issues of product development in order to identify those parameters that will determine future directions for electronic packaging technologies.

Microelectronics in Japan

NASA Technical Reports Server (NTRS)

Boulton, William R.

1995-01-01

The purpose of this JTEC study is to evaluate Japan's electronic manufacturing and packaging capabilities within the context of global economic competition. To carry out this study, the JTEC panel evaluated the framework of the Japanese consumer electronics industry and various technological and organizational factors that are likely to determine who will win and lose in the marketplace. This study begins with a brief overview of the electronics industry, especially as it operates in Japan today. Succeeding chapters examine the electronics infrastructure in Japan and take an in-depth look at the central issues of product development in order to identify those parameters that will determine future directions for electronic packaging technologies.

Transient, biocompatible electronics and energy harvesters based on ZnO.

PubMed

Dagdeviren, Canan; Hwang, Suk-Won; Su, Yewang; Kim, Stanley; Cheng, Huanyu; Gur, Onur; Haney, Ryan; Omenetto, Fiorenzo G; Huang, Yonggang; Rogers, John A

2013-10-25

The combined use of ZnO, Mg, MgO, and silk provides routes to classes of thin-film transistors and mechanical energy harvesters that are soluble in water and biofluids. Experimental and theoretical studies of the operational aspects and dissolution properties of this type of transient electronics technology illustrate its various capabilities. Application opportunities range from resorbable biomedical implants, to environmentally dissolvable sensors, and degradable consumer electronics. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Epidemiology of infant ocular and periocular injuries from consumer products in the United States, 2001-2008.

PubMed

Chen, Allison J; Linakis, James G; Mello, Michael J; Greenberg, Paul B

2013-06-01

To quantify and characterize eye injuries related to consumer products in the infant population (0-12 months) treated in United States hospital emergency departments during the period from 2001 to 2008. This study is a descriptive analysis of consumer-product related eye injury data derived from the National Electronic Injury Surveillance System, a probability sample of 100 hospitals nationwide with 24-hour emergency departments. Narrative data were used to assign each case with the consumer products (CPs) causing the eye injury. The proportions of eye injury visits were calculated by age, sex, diagnosis, disposition, locale of incident, and CP categories. We examined the US Consumer Product Safety Commission National Electronic Injury Surveillance System data for all nonfatal eye injuries (853 cases) in the infant population (0-12 months) treated in US emergency departments from 2001 to 2008. These data can be used to project national, annual, weighted estimates of nonfatal injury treated in US emergency departments. There were an estimated 21,271 visits to US emergency departments by patients aged 0-12 months for CP-related eye injuries during the study period. Of these, 63% involved infants aged 9-12 months and 54% involved male patients; 78% of all injuries occurred at home. The CPs causing the most eye injuries belonged to the categories of chemical (46%) and household items (24%). Contusions and abrasions were the leading eye injuries diagnoses (37%). This study suggests that most CP-related infant eye injuries in the United States occur at home and are predominantly caused by chemicals and household products. Published by Mosby, Inc.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chung, Donald; Elgqvist, Emma; Santhanagopalan, Shriram

Manufacturing capacity for lithium-ion batteries (LIBs) — which power many consumer electronics and are increasingly used to power electric vehicles — is heavily concentrated in East Asia. To illuminate the factors that drive regional competitiveness in automotive LIB cell production, this study models cell manufacturing cost and minimum sustainable price, and examines development of LIB supply chains and current LIB market conditions. The study shows that factors driving the cost competitiveness of LIB manufacturing locations are mostly built—supply chain developments and competition, access to materials, and production expertise. Some regional costs — including cost of capital, labor, and materials —more » are significant and should be considered.« less

Health consumer-oriented information retrieval.

PubMed

Claveau, Vincent; Hamon, Thierry; Le Maguer, Sébastien; Grabar, Natalia

2015-01-01

While patients can freely access their Electronic Health Records or online health information, they may not be able to correctly understand the content of these documents. One of the challenges is related to the difference between expert and non-expert languages. We propose to investigate this issue within the Information Retrieval field. The patient queries have to be associated with the corresponding expert documents, that provide trustworthy information. Our approach relies on a state-of-the-art IR system called Indri and on semantic resources. Different query expansion strategies are explored. Our system shows up to 0.6740 P@10, up to 0.7610 R@10, and up to 0.6793 NDCG@10.

Organophosphorus Flame Retardants Inhibit Specific Liver Carboxylesterases and Cause Serum Hypertriglyceridemia

PubMed Central

2015-01-01

Humans are prevalently exposed to organophosphorus flame retardants (OPFRs) contained in consumer products and electronics, though their toxicological effects and mechanisms remain poorly understood. We show here that OPFRs inhibit specific liver carboxylesterases (Ces) and cause altered hepatic lipid metabolism. Ablation of the OPFR target Ces1g has been previously linked to dyslipidemia in mice. Consistent with OPFR inhibition of Ces1g, we also observe OPFR-induced serum hypertriglyceridemia in mice. Our findings suggest novel toxicities that may arise from OPFR exposure and highlight the utility of chemoproteomic and metabolomic platforms in the toxicological characterization of environmental chemicals. PMID:24597639

Asian Consumer Education Study: Korea. Summary of Findings.

ERIC Educational Resources Information Center

Bannister, Rosella; Green, Hayden

The Asian Consumer Education Study was designed to gather information about the current status of consumer education in Korea. Conversations and informal interviews with 27 consumer leaders showed that, with the exception of academic specialists and consumer professionals in government, business, and community organizations, consumers gave little…

Contributions to Industrial Development of Science and Technology Institutions in Malaysia, Nigeria, and Colombia and Opportunities for Bilateral Cooperation (A Cross-Country Comparative Analysis).

DTIC Science & Technology

1979-09-01

inexpensive labor, and to modify products to meet the tastes of local consumers . Indeed, technology development for most industrial operations in these...of oil spills (Exxon) Local flavors added to toothpaste and cosmetics ( Colgate -Palmolive) Development of specialized electronic circuitry (Motorola...conditions, and to adjusting products to local consumer tastes. An exception is the Motorola laboratory in Penang. Using the highly skilled Chinese

A personally controlled electronic health record for Australia

PubMed Central

Pearce, Christopher; Bainbridge, Michael

2014-01-01

Objective On July 1, 2012 Australia launched a personally controlled electronic health record (PCEHR) designed around the needs of consumers. Using a distributed model and leveraging key component national eHealth infrastructure, the PCEHR is designed to enable sharing of any health information about a patient with them and any other health practitioner involved in their care to whom the patient allows access. This paper discusses the consumer-facing part of the program. Method Design of the system was through stakeholder consultation and the development of detailed requirements, followed by clinical design assurance. Results Patients are able to access any posted information through a web-accessible ‘consumer portal.’ Within the portal they are able to assert access controls on all or part of their record. The portal includes areas for consumers to record their own personal information. Discussion The PCEHR has the potential to transform the ability of patients to actively engage in their own healthcare, and to enable the emerging partnership model of health and healthcare in medicine. The ability to access health information traditionally kept within the closed walls of institutions also raises challenges for the profession, both in the language clinicians choose and the ethical issues raised by the changed roles and responsibilities. Conclusions The PCEHR is aimed at connecting all participants and their interventions, and is intended to become a system-wide activity. PMID:24650635

Injuries Associated With Hazards Involving Motor Vehicle Batteries

DOT National Transportation Integrated Search

1997-07-01

National Highway Traffic Safety Administration's (NHTSA) National Center for : Statistics recently examined data from the Consumer Product Safety Commission's : (CPSC) National Electronic Injury Surveillance (NEISS) on cases involving : injuries burn...

Biologic Medications for Psoriasis

MedlinePlus

... Student Debt Special Report All Money More on Money Best & Worst Banks According to Consumer Reports Members ... Appliances Babies & Kids Cars Electronics Health Home & Garden Money A-Z Index Magazine & Books Current Issue Magazine ...

Radiation characteristics of input power from surface wave sustained plasma antenna

DOE Office of Scientific and Technical Information (OSTI.GOV)

Naito, T., E-mail: Naito.Teruki@bc.MitsubishiElectric.co.jp; Yamaura, S.; Fukuma, Y.

This paper reports radiation characteristics of input power from a surface wave sustained plasma antenna investigated theoretically and experimentally, especially focusing on the power consumption balance between the plasma generation and the radiation. The plasma antenna is a dielectric tube filled with argon and small amount of mercury, and the structure is a basic quarter wavelength monopole antenna at 2.45 GHz. Microwave power at 2.45 GHz is supplied to the plasma antenna. The input power is partially consumed to sustain the plasma, and the remaining part is radiated as a signal. The relationship between the antenna gain and the input powermore » is obtained by an analytical derivation and numerical simulations. As a result, the antenna gain is kept at low values, and most of the input power is consumed to increase the plasma volume until the tube is filled with the plasma whose electron density is higher than the critical electron density required for sustaining the surface wave. On the other hand, the input power is consumed to increase the electron density after the tube is fully filled with the plasma, and the antenna gain increases with increasing the electron density. The dependence of the antenna gain on the electron density is the same as that of a plasma antenna sustained by a DC glow discharge. These results are confirmed by experimental results of the antenna gain and radiation patterns. The antenna gain of the plasma is a few dB smaller than that of the identical metal antenna. The antenna gain of the plasma antenna is sufficient for the wireless communication, although it is difficult to substitute the plasma antenna for metal antennas completely. The plasma antenna is suitable for applications having high affinity with the plasma characteristics such as low interference and dynamic controllability.« less

Best Medications to Treat Fibromyalgia

MedlinePlus

... Student Debt Special Report All Money More on Money Best & Worst Banks According to Consumer Reports Members ... Appliances Babies & Kids Cars Electronics Health Home & Garden Money A-Z Index Magazine & Books Current Issue Magazine ...

7 CFR 1710.205 - Minimum approval requirements for all load forecasts.

Code of Federal Regulations, 2013 CFR

2013-01-01

... electronically to RUS computer software applications. RUS will evaluate borrower load forecasts for readability...'s engineering planning documents, such as the construction work plan, incorporate consumer and usage...

7 CFR 1710.205 - Minimum approval requirements for all load forecasts.

Code of Federal Regulations, 2011 CFR

2011-01-01

... electronically to RUS computer software applications. RUS will evaluate borrower load forecasts for readability...'s engineering planning documents, such as the construction work plan, incorporate consumer and usage...

7 CFR 1710.205 - Minimum approval requirements for all load forecasts.

Code of Federal Regulations, 2012 CFR

2012-01-01

... electronically to RUS computer software applications. RUS will evaluate borrower load forecasts for readability...'s engineering planning documents, such as the construction work plan, incorporate consumer and usage...

Questionnaire survey of customer satisfaction for product categories towards certification of ergonomic quality in design.

PubMed

Mochimaru, Masaaki; Takahashi, Miwako; Hatakenaka, Nobuko; Horiuchi, Hitoshi

2012-01-01

Customer satisfaction was surveyed for 6 product categories (consumer electronics, daily commodities, home equipment, information systems, cars, and health appliances) by questionnaires based on the Analytic Hierarchy Process. Analyzing weight of evaluation factors, the 6 product categories were reorganized into 4 categories, those were related to 4 aspects in daily living that formed by two axes: home living - mobility life and healthy life - active communication. It was found that consumers were attracted by the actual user test by public institutes for all product categories. The certification based on the design process standard established by authorities, such as EQUID was the second best attractor for consumers.

Lighnting detection and tracking with consumer electronics

NASA Astrophysics Data System (ADS)

Kamau, Gilbert; van de Giesen, Nick

2015-04-01

Lightning data is not only important for environment and weather monitoring but also for safety purposes. The AS3935 Franklin Lightning Sensor (AMS, Unterpremstaetten, Austria) is a lightning sensor developed for inclusion in consumer electronics such as watches and mobile phones. The AS3935 is small (4mmx4mm) and relatively cost effective (Eu 5). The downside is that only rough distance estimates are provided, as average power is assumed for every lightning strike. To be able to track lightning, a network of devices that monitor and keep track of occurrences of lightning strikes was developed. A communication interface was established between the sensors, a data logging circuit and a microcontroller. The digital outputs of the lightning sensor and data from a GPS are processed by the microcontroller and logged onto an SD card. The interface program enables sampling parameters such as distance from the lightning strike, time of strike occurrence and geographical location of the device. For archiving and analysis purposes, the data can be transferred from the SD card to a PC and results displayed using a graphical user interface program. Data gathered shows that the device can track the frequency and movement of lightning strikes in an area. The device has many advantages as compared to other lightning sensor stations in terms of huge memory, lower power consumption, small size, greater portability and lower cost. The devices were used in a network around Nairobi, Kenya. Through multi-lateration, lightning strikes could be located with a RMSE of 2 km or better.

In situ electrical and thermal monitoring of printed electronics by two-photon mapping.

PubMed

Pastorelli, Francesco; Accanto, Nicolò; Jørgensen, Mikkel; van Hulst, Niek F; Krebs, Frederik C

2017-06-19

Printed electronics is emerging as a new, large scale and cost effective technology that will be disruptive in fields such as energy harvesting, consumer electronics and medical sensors. The performance of printed electronic devices relies principally on the carrier mobility and molecular packing of the polymer semiconductor material. Unfortunately, the analysis of such materials is generally performed with destructive techniques, which are hard to make compatible with in situ measurements, and pose a great obstacle for the mass production of printed electronics devices. A rapid, in situ, non-destructive and low-cost testing method is needed. In this study, we demonstrate that nonlinear optical microscopy is a promising technique to achieve this goal. Using ultrashort laser pulses we stimulate two-photon absorption in a roll coated polymer semiconductor and map the resulting two-photon induced photoluminescence and second harmonic response. We show that, in our experimental conditions, it is possible to relate the total amount of photoluminescence detected to important material properties such as the charge carrier density and the molecular packing of the printed polymer material, all with a spatial resolution of 400 nm. Importantly, this technique can be extended to the real time mapping of the polymer semiconductor film, even during the printing process, in which the high printing speed poses the need for equally high acquisition rates.

The Design of a Portable and Deployable Solar Energy System for Deployed Military Applications

DTIC Science & Technology

2011-04-01

Abstract- Global Positioning Systems, thermal imaging scopes, satellite phones, and other electronic devices are critical to the warfighter in... imaging scopes, satellite phones, and other electronic devices are critical to the warfighter in Forward Operating Environments. Many are battery operated...Technology & Engineering 24. Kumar, Shrawan, Mital, Anil, Electromyography in ergonomics 25. Stanton, Neville Human factors in consumer products, CRC

Consumer choice of pork chops in Taiwan.

PubMed

Chen, M T; Guo, H L; Tseng, T F; Roan, S W; Ngapo, T M

2010-07-01

Digital photographs of pork chops varying systematically in appearance were presented to 716 Taiwanese consumers in a study that aimed to identify the most important characteristics of fresh pork which determine consumer choice in Taiwan. Relationships between consumer segmentation in choice and socio-demographic and cultural differences were also investigated. Colour and fat cover were the most frequently chosen of the four characteristics studied. Dark red colour was preferred by 64% of consumers and lean fat cover by 44%. Marbling and drip were less important in the decision making process being used by less than a half of consumers. The four preference-based clusters of consumers showed no correlation with socio-demographic-based consumer clusters, but did show significant links with possession of a refrigerator, age at which schooling was completed, liking pork for its price and gender of consumer. Crown Copyright 2010. Published by Elsevier Ltd. All rights reserved.

The use of electronic games in therapy: a review with clinical implications.

PubMed

Horne-Moyer, H Lynn; Moyer, Brian H; Messer, Drew C; Messer, Elizabeth S

2014-12-01

Therapists and patients enjoy and benefit from interventions that use electronic games (EG) in health care and mental health settings, with a variety of diagnoses and therapeutic goals. We reviewed the use of electronic games designed specifically for a therapeutic purpose, electronic games for psychotherapy (EGP), also called serious games, and commercially produced games used as an adjunct to psychotherapy, electronic games for entertainment (EGE). Recent research on the benefits of EG in rehabilitation settings, EGP, and EGE indicates that electronic methods are often equivalent to more traditional treatments and may be more enjoyable or acceptable, at least to some consumers. Methodological concerns include the lack of randomized controlled trials (RCT) for many applications. Suggestions are offered for using EG in therapeutic practice.

Fabrication Approaches to Interconnect Based Devices for Stretchable Electronics: A Review.

PubMed

Nagels, Steven; Deferme, Wim

2018-03-03

Stretchable electronics promise to naturalize the way that we are surrounded by and interact with our devices. Sensors that can stretch and bend furthermore have become increasingly relevant as the technology behind them matures rapidly from lab-based workflows to industrially applicable production principles. Regardless of the specific materials used, creating stretchable conductors involves either the implementation of strain reliefs through insightful geometric patterning, the dispersion of stiff conductive filler in an elastomeric matrix, or the employment of intrinsically stretchable conductive materials. These basic principles however have spawned a myriad of materials systems wherein future application engineers need to find their way. This paper reports a literature study on the spectrum of different approaches towards stretchable electronics, discusses standardization of characteristic tests together with their reports and estimates matureness for industry. Patterned copper foils that are embedded in elastomeric sheets, which are closest to conventional electronic circuits processing, make up one end of the spectrum. Furthest from industry are the more recent circuits based on intrinsically stretchable liquid metals. These show extremely promising results, however, as a technology, liquid metal is not mature enough to be adapted. Printing makes up the transition between both ends, and is also well established on an industrial level, but traditionally not linked to creating electronics. Even though a certain level of maturity was found amongst the approaches that are reviewed herein, industrial adaptation for consumer electronics remains unpredictable without a designated break-through commercial application.

Multiple scattering theory for total skin electron beam design.

PubMed

Antolak, J A; Hogstrom, K R

1998-06-01

The purpose of this manuscript is to describe a method for designing a broad beam of electrons suitable for total skin electron irradiation (TSEI). A theoretical model of a TSEI beam from a linear accelerator with a dual scattering system has been developed. The model uses Fermi-Eyges theory to predict the planar fluence of the electron beam after it has passed through various materials between the source and the treatment plane, which includes scattering foils, monitor chamber, air, and a plastic diffusing plate. Unique to this model is its accounting for removal of the tails of the electron beam profile as it passes through the primary x-ray jaws. A method for calculating the planar fluence profile for an obliquely incident beam is also described. Off-axis beam profiles and percentage depth doses are measured with ion chambers, film, and thermoluminescent dosimeters (TLD). The measured data show that the theoretical model can accurately predict beam energy and planar fluence of the electron beam at normal and oblique incidence. The agreement at oblique angles is not quite as good but is sufficiently accurate to be of predictive value when deciding on the optimal angles for the clinical TSEI beams. The advantage of our calculational approach for designing a TSEI beam is that many different beam configurations can be tested without having to perform time-consuming measurements. Suboptimal configurations can be quickly dismissed, and the predicted optimal solution should be very close to satisfying the clinical specifications.

Fabrication Approaches to Interconnect Based Devices for Stretchable Electronics: A Review

PubMed Central

Nagels, Steven

2018-01-01

Stretchable electronics promise to naturalize the way that we are surrounded by and interact with our devices. Sensors that can stretch and bend furthermore have become increasingly relevant as the technology behind them matures rapidly from lab-based workflows to industrially applicable production principles. Regardless of the specific materials used, creating stretchable conductors involves either the implementation of strain reliefs through insightful geometric patterning, the dispersion of stiff conductive filler in an elastomeric matrix, or the employment of intrinsically stretchable conductive materials. These basic principles however have spawned a myriad of materials systems wherein future application engineers need to find their way. This paper reports a literature study on the spectrum of different approaches towards stretchable electronics, discusses standardization of characteristic tests together with their reports and estimates matureness for industry. Patterned copper foils that are embedded in elastomeric sheets, which are closest to conventional electronic circuits processing, make up one end of the spectrum. Furthest from industry are the more recent circuits based on intrinsically stretchable liquid metals. These show extremely promising results, however, as a technology, liquid metal is not mature enough to be adapted. Printing makes up the transition between both ends, and is also well established on an industrial level, but traditionally not linked to creating electronics. Even though a certain level of maturity was found amongst the approaches that are reviewed herein, industrial adaptation for consumer electronics remains unpredictable without a designated break-through commercial application. PMID:29510497

Shapeable magnetoelectronics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Makarov, Denys, E-mail: d.makarov@hzdr.de, E-mail: m.melzer@ifw-dresden.de; Helmholtz-Zentrum Dresden-Rossendorf e.V., Institute of Ion Beam Physics and Materials Research, 01328 Dresden; Melzer, Michael, E-mail: d.makarov@hzdr.de, E-mail: m.melzer@ifw-dresden.de

Inorganic nanomembranes are shapeable (flexible, printable, and even stretchable) and transferrable to virtually any substrate. These properties build the core concept for new technologies, which transform otherwise rigid high-speed devices into their shapeable counterparts. This research is motivated by the eagerness of consumer electronics towards being thin, lightweight, flexible, and even wearable. The realization of this concept requires all building blocks as we know them from rigid electronics (e.g., active elements, optoelectronics, magnetoelectronics, and energy storage) to be replicated in the form of (multi)functional nanomembranes, which can be reshaped on demand after fabrication. There are already a variety of shapeablemore » devices commercially available, i.e., electronic displays, energy storage elements, and integrated circuitry, to name a few. From the beginning, the main focus was on the fabrication of shapeable high-speed electronics and optoelectronics. Only very recently, a new member featuring magnetic functionalities was added to the family of shapeable electronics. With their unique mechanical properties, the shapeable magnetic field sensor elements readily conform to ubiquitous objects of arbitrary shapes including the human skin. This feature leads electronic skin systems beyond imitating the characteristics of its natural archetype and extends their cognition to static and dynamic magnetic fields that by no means can be perceived by human beings naturally. Various application fields of shapeable magnetoelectronics are proposed. The developed sensor platform can equip soft electronic systems with navigation, orientation, motion tracking, and touchless control capabilities. A variety of novel technologies, such as smart textiles, soft robotics and actuators, active medical implants, and soft consumer electronics, will benefit from these new magnetic functionalities. This review reflects the establishment of shapeable magnetic sensorics, describing the entire development from the first attempts to verify the functional concept to the realization of ready-to-use highly compliant and strain invariant sensor devices with remarkable robustness.« less

Bromine in plastic consumer products - Evidence for the widespread recycling of electronic waste.

PubMed

Turner, Andrew; Filella, Montserrat

2017-12-01

A range of plastic consumer products and components thereof have been analysed by x-ray fluorescence (XRF) spectrometry in a low density mode for Br as a surrogate for brominated flame retardant (BFR) content. Bromine was detected in about 42% of 267 analyses performed on electronic (and electrical) samples and 18% of 789 analyses performed on non-electronic samples, with respective concentrations ranging from 1.8 to 171,000μgg -1 and 2.6 to 28,500μgg -1 . Amongst the electronic items, the highest concentrations of Br were encountered in relatively small appliances, many of which predated 2005 (e.g. a fan heater, boiler thermostat and smoke detector, and various rechargers, light bulb collars and printed circuit boards), and usually in association with Sb, a component of antimony oxide flame retardant synergists, and Pb, a heavy metal additive and contaminant. Amongst the non-electronic samples, Br concentrations were highest in items of jewellery, a coffee stirrer, a child's puzzle, a picture frame, and various clothes hangers, Christmas decorations and thermos cup lids, and were often associated with the presence of Sb and Pb. These observations, coupled with the presence of Br at concentrations below those required for flame-retardancy in a wider range of electronic and non-electronic items, are consistent with the widespread recycling of electronic plastic waste. That most Br-contaminated items were black suggests the current and recent demand for black plastics in particular is met, at least partially, through this route. Given many Br-contaminated items would evade the attention of the end-user and recycler, their disposal by conventional municipal means affords a course of BFR entry into the environment and, for food-contact items, a means of exposure to humans. Copyright © 2017 Elsevier B.V. All rights reserved.

Shapeable magnetoelectronics

NASA Astrophysics Data System (ADS)

Makarov, Denys; Melzer, Michael; Karnaushenko, Daniil; Schmidt, Oliver G.

2016-03-01

Inorganic nanomembranes are shapeable (flexible, printable, and even stretchable) and transferrable to virtually any substrate. These properties build the core concept for new technologies, which transform otherwise rigid high-speed devices into their shapeable counterparts. This research is motivated by the eagerness of consumer electronics towards being thin, lightweight, flexible, and even wearable. The realization of this concept requires all building blocks as we know them from rigid electronics (e.g., active elements, optoelectronics, magnetoelectronics, and energy storage) to be replicated in the form of (multi)functional nanomembranes, which can be reshaped on demand after fabrication. There are already a variety of shapeable devices commercially available, i.e., electronic displays, energy storage elements, and integrated circuitry, to name a few. From the beginning, the main focus was on the fabrication of shapeable high-speed electronics and optoelectronics. Only very recently, a new member featuring magnetic functionalities was added to the family of shapeable electronics. With their unique mechanical properties, the shapeable magnetic field sensor elements readily conform to ubiquitous objects of arbitrary shapes including the human skin. This feature leads electronic skin systems beyond imitating the characteristics of its natural archetype and extends their cognition to static and dynamic magnetic fields that by no means can be perceived by human beings naturally. Various application fields of shapeable magnetoelectronics are proposed. The developed sensor platform can equip soft electronic systems with navigation, orientation, motion tracking, and touchless control capabilities. A variety of novel technologies, such as smart textiles, soft robotics and actuators, active medical implants, and soft consumer electronics, will benefit from these new magnetic functionalities. This review reflects the establishment of shapeable magnetic sensorics, describing the entire development from the first attempts to verify the functional concept to the realization of ready-to-use highly compliant and strain invariant sensor devices with remarkable robustness.

Fabrication of enzyme-based coatings on intact multi-walled carbon nanotubes as highly effective electrodes in biofuel cells

NASA Astrophysics Data System (ADS)

Kim, Byoung Chan; Lee, Inseon; Kwon, Seok-Joon; Wee, Youngho; Kwon, Ki Young; Jeon, Chulmin; An, Hyo Jin; Jung, Hee-Tae; Ha, Su; Dordick, Jonathan S.; Kim, Jungbae

2017-01-01

CNTs need to be dispersed in aqueous solution for their successful use, and most methods to disperse CNTs rely on tedious and time-consuming acid-based oxidation. Here, we report the simple dispersion of intact multi-walled carbon nanotubes (CNTs) by adding them directly into an aqueous solution of glucose oxidase (GOx), resulting in simultaneous CNT dispersion and facile enzyme immobilization through sequential enzyme adsorption, precipitation, and crosslinking (EAPC). The EAPC achieved high enzyme loading and stability because of crosslinked enzyme coatings on intact CNTs, while obviating the chemical pretreatment that can seriously damage the electron conductivity of CNTs. EAPC-driven GOx activity was 4.5- and 11-times higher than those of covalently-attached GOx (CA) on acid-treated CNTs and simply-adsorbed GOx (ADS) on intact CNTs, respectively. EAPC showed no decrease of GOx activity for 270 days. EAPC was employed to prepare the enzyme anodes for biofuel cells, and the EAPC anode produced 7.5-times higher power output than the CA anode. Even with a higher amount of bound non-conductive enzymes, the EAPC anode showed 1.7-fold higher electron transfer rate than the CA anode. The EAPC on intact CNTs can improve enzyme loading and stability with key routes of improved electron transfer in various biosensing and bioelectronics devices.

In vivo effects of two acidic soft drinks on shear bond strength of metal orthodontic brackets with and without resin infiltration treatment.

PubMed

Hammad, Shaza M; Enan, Enas T

2013-07-01

To evaluate the in vivo effects of two acidic soft drinks (Coca-Cola and Sprite) on the shear bond strength of metal orthodontic brackets with and without resin infiltration treatment. In addition, the enamel surface was evaluated, after debonding, using a scanning electron microscope. Sixty noncarious maxillary premolars, scheduled for extraction in 30 orthodontic patients, were used. Patients were randomly divided into two groups according to the soft drink tested (Coca-Cola or Sprite). In each group, application of resin infiltration (Icon. DMG, Hamburg, Germany) was done on one side only before bonding of brackets. Patients were told to rinse their mouth with their respective soft drink at room temperature for 5 minutes, three times a day for 3 months. Shear bond strength was tested with a universal testing machine. After shearing test, a scanning electron microscope was used to evaluate enamel erosion. Statistical analysis was performed by twoway analysis of variance followed by the least significant difference test. The Coca-Cola group without resin infiltration showed the lowest resistance to shearing forces. Scanning electron micrographs of both groups after resin application showed a significant improvement compared with results without resin use, as the enamel appeared smoother and less erosive. Pretreatment with the infiltrating resin has proved to result in a significant improvement in shear bond strength, regardless of the type of soft drink consumed.

Best Drugs to Treat Inflammatory Bowel Disease

MedlinePlus

... Student Debt Special Report All Money More on Money Best & Worst Banks According to Consumer Reports Members ... Appliances Babies & Kids Cars Electronics Health Home & Garden Money A-Z Index Magazine & Books Current Issue Magazine ...

6 Tips to Avoid Medication Mistakes

MedlinePlus

... marketing the Electronic Medication Management Assistant (EMMA), a programmable device that stores and dispenses prescription medication for ... Of Your Health Care Team (article) Consumer Educational Materials: What You Need to Know to Use Medicine ...

Injuries Associated With Hazards Involving Motor Vehicle Power Windows

DOT National Transportation Integrated Search

1997-05-01

National Highway Traffic Safety Administration's (NHTSA) National Center for : Statistics and Analysis (NCSA) recently completed a study of data from the : Consumer Product Safety Commission's (CPSC) National Electronic Injury : Surveillance System (...

Materials and applications of bioresorbable electronics

NASA Astrophysics Data System (ADS)

Huang, Xian

2018-01-01

Bioresorbable electronics is a new type of electronics technology that can potentially lead to biodegradable and dissolvable electronic devices to replace current built-to-last circuits predominantly used in implantable devices and consumer electronics. Such devices dissolve in an aqueous environment in time periods from seconds to months, and generate biological safe products. This paper reviews materials, fabrication techniques, and applications of bioresorbable electronics, and aims to inspire more revolutionary bioresorbable systems that can generate broader social and economic impact. Existing challenges and potential solutions in developing bioresorbable electronics have also been presented to arouse more joint research efforts in this field to build systematic technology framework. Project supported by the National Natural Science Foundation of China (No. 61604108) and the Natural Science Foundation of Tianjin (No. 16JCYBJC40600).

Cost-benefit study of consumer product take-back programs using IBM's WIT reverse logistics optimization tool

NASA Astrophysics Data System (ADS)

Veerakamolmal, Pitipong; Lee, Yung-Joon; Fasano, J. P.; Hale, Rhea; Jacques, Mary

2002-02-01

In recent years, there has been increased focus by regulators, manufacturers, and consumers on the issue of product end of life management for electronics. This paper presents an overview of a conceptual study designed to examine the costs and benefits of several different Product Take Back (PTB) scenarios for used electronics equipment. The study utilized a reverse logistics supply chain model to examine the effects of several different factors in PTB programs. The model was done using the IBM supply chain optimization tool known as WIT (Watson Implosion Technology). Using the WIT tool, we were able to determine a theoretical optimal cost scenario for PTB programs. The study was designed to assist IBM internally in determining theoretical optimal Product Take Back program models and determining potential incentives for increasing participation rates.

Electronic evaluation for video commercials by impression index.

PubMed

Kong, Wanzeng; Zhao, Xinxin; Hu, Sanqing; Vecchiato, Giovanni; Babiloni, Fabio

2013-12-01

How to evaluate the effect of commercials is significantly important in neuromarketing. In this paper, we proposed an electronic way to evaluate the influence of video commercials on consumers by impression index. The impression index combines both the memorization and attention index during consumers observing video commercials by tracking the EEG activity. It extracts features from scalp EEG to evaluate the effectiveness of video commercials in terms of time-frequency-space domain. And, the general global field power was used as an impression index for evaluation of video commercial scenes as time series. Results of experiment demonstrate that the proposed approach is able to track variations of the cerebral activity related to cognitive task such as observing video commercials, and help to judge whether the scene in video commercials is impressive or not by EEG signals.

Religious Media Use Among African Americans, Black Caribbeans, and Non-Hispanic Whites

PubMed Central

Chatters, Linda M.

2014-01-01

The purpose of this study was to examine the correlates of watching religious television programs and listening to religious radio programs. Data are taken from the National Survey of American Life, a nationally representative study of African Americans, Black Caribbeans, and non-Hispanic Whites. Several significant findings were noted. Both African Americans and Black Caribbeans watched religious television programs and listened to religious radio programs significantly more frequently than non-Hispanic whites. These differences in electronic religious media consumption were particularly large, especially listening to religious radio programming. Among African Americans and Black Caribbeans, several significant demographic differences in frequency of consuming religious programming (e.g., age, gender, region, marital status, immigration status) emerged. Lastly, our analysis found that consuming electronic religious programming did not substitute for attending church service but, instead, complemented weekly service attendance. PMID:26045698

Espina: A Tool for the Automated Segmentation and Counting of Synapses in Large Stacks of Electron Microscopy Images

PubMed Central

Morales, Juan; Alonso-Nanclares, Lidia; Rodríguez, José-Rodrigo; DeFelipe, Javier; Rodríguez, Ángel; Merchán-Pérez, Ángel

2011-01-01

The synapses in the cerebral cortex can be classified into two main types, Gray's type I and type II, which correspond to asymmetric (mostly glutamatergic excitatory) and symmetric (inhibitory GABAergic) synapses, respectively. Hence, the quantification and identification of their different types and the proportions in which they are found, is extraordinarily important in terms of brain function. The ideal approach to calculate the number of synapses per unit volume is to analyze 3D samples reconstructed from serial sections. However, obtaining serial sections by transmission electron microscopy is an extremely time consuming and technically demanding task. Using focused ion beam/scanning electron microscope microscopy, we recently showed that virtually all synapses can be accurately identified as asymmetric or symmetric synapses when they are visualized, reconstructed, and quantified from large 3D tissue samples obtained in an automated manner. Nevertheless, the analysis, segmentation, and quantification of synapses is still a labor intensive procedure. Thus, novel solutions are currently necessary to deal with the large volume of data that is being generated by automated 3D electron microscopy. Accordingly, we have developed ESPINA, a software tool that performs the automated segmentation and counting of synapses in a reconstructed 3D volume of the cerebral cortex, and that greatly facilitates and accelerates these processes. PMID:21633491

NREL: News - Expo to Show Consumers How to Cut Energy Use

Science.gov Websites

Expo to Show Consumers How to Cut Energy Use Golden, Colo., June 6, 2002 Consumers can learn how to save energy and money at home from experts who specialize in energy efficient and renewable energy products and services at the Consumer Energy Expo June 21 - 22. The Expo is hosted by the U.S. Department

Composition and Elution Behavior of Various Elements from Printed Circuit Boards, Cathode-ray Tube Glass, and Liquid-crystal Displays in Waste Consumer Electronics.

PubMed

Inaba, Kazuho; Murata, Tomoyoshi; Yamamura, Shigeki; Nagano, Masaaki; Iwasaki, Kazuhiro; Nakajima, Daisuke; Takigami, Hidetaka

2018-01-01

The contents and elution behavior of metals in consumer electronics parts were determined so as to understand their maximum environmental risk. Elements contained most in printed-circuit boards were Cu, Si, Br, Ca, Al, Sn, Pb, Sb, Ba, Fe, Ni, Ti, and Zn; in cathode-ray tube glass were Si, Pb, Ba, Sr, Zn, Zr, Ca, and Sb; in arsenic contained liquid-crystal displays were Si, Ca, Sr, Ba, As, and Fe; and in antimony contained liquid-crystal displays were Si, Ba, Ca, Sb, Sr, Fe, and Sn. The elements eluted most from printed-circuit boards were Zn, Pb, and Cu; from cathode-ray tube glass were Pb, Zn, B, Ba, and Si; and from liquid-crystal displays were B and Si, and the toxic As and Sb. The amount eluted was greatest at acidic pH. It was revealed that officially recommended 6-h-shaking with a pure water test was insufficient to understand the real environmental risk of waste electronics.

Applications of energy harvesting for ultralow power technology

NASA Astrophysics Data System (ADS)

Pop-Vadean, A.; Pop, P. P.; Barz, C.; Chiver, O.

2015-06-01

Ultra-low-power (ULP) technology is enabling a wide range of new applications that harvest ambient energy in very small amounts and need little or no maintenance - self-sustaining devices that are capable of perpetual or nearly perpetual operation. These new systems, which are now appearing in industrial and consumer electronics, also promise great changes in medicine and health. Until recently, the idea of micro-scale energy harvesting, and collecting miniscule amounts of ambient energy to power electronic systems, was still limited to research proposals and laboratory experiments.Today an increasing number of systems are appearing that take advantage of light, vibrations and other forms of previously wasted environmental energy for applications where providing line power or maintaining batteries is inconvenient. In the industrial world, where sensors gather information from remote equipment and hazardous processes; in consumer electronics, where mobility and convenience are served; and in medical systems, with unique requirements for prosthetics and non-invasive monitoring, energy harvesting is rapidly expanding into new applications.This paper serves as a survey for applications of energy harvesting for ultra low power technology based on various technical papers available in the public domain.

Trial of an electronic decision support system to facilitate shared decision making in community mental health.

PubMed

Woltmann, Emily M; Wilkniss, Sandra M; Teachout, Alexandra; McHugo, Gregory J; Drake, Robert E

2011-01-01

Involvement of community mental health consumers in mental health decision making has been consistently associated with improvements in health outcomes. Electronic decision support systems (EDSSs) that support both consumer and provider decision making may be a sustainable way to improve dyadic communication in a field with approximately 50% workforce turnover per year. This study examined the feasibility of such a system and investigated proximal outcomes of the system's performance. A cluster randomized design was used to evaluate an EDSS at three urban community mental health sites. Case managers (N=20) were randomly assigned to the EDSS-supported planning group or to the usual care planning group. Consumers (N=80) were assigned to the same group as their case managers. User satisfaction with the care planning process was assessed for consumers and case managers (possible scores range from 1 to 5, with higher summary scores indicating more satisfaction). Recall of the care plan was assessed for consumers. Linear regression with adjustment for grouping by worker was used to assess satisfaction scores. A Wilcoxon rank-sum test was used to examine knowledge of the care plan. Compared with case managers in the control group, those in the intervention group were significantly more satisfied with the care planning process (mean ± SD score=4.0 ± .5 versus 3.3 ± .5; adjusted p=.01). Compared with consumers in the control group, those in the intervention group had significantly greater recall of their care plans three days after the planning session (mean proportion of plan goals recalled=75% ± 28% versus 57% ± 32%; p=.02). There were no differences between the clients in the intervention and control groups regarding satisfaction. This study demonstrated that clients can build their own care plans and negotiate and revise them with their case managers using an EDSS.

Requirement analysis to promote small-sized E-waste collection from consumers.

PubMed

Mishima, Kuniko; Nishimura, Hidekazu

2016-02-01

The collection and recycling of small-sized waste electrical and electronic equipment is an emerging problem, since these products contain certain amounts of critical metals and rare earths. Even if the amount is not large, having a few supply routes for such recycled resources could be a good strategy to be competitive in a world of finite resources. The small-sized e-waste sometimes contains personal information, therefore, consumers are often reluctant to put them into recycling bins. In order to promote the recycling of E-waste, collection of used products from the consumer becomes important. Effective methods involving incentives for consumers might be necessary. Without such methods, it will be difficult to achieve the critical amounts necessary for an efficient recycling system. This article focused on used mobile phones among information appliances as the first case study, since it contains relatively large amounts of valuable metals compared with other small-sized waste electrical and electronic equipment and there are a large number of products existing in the market. The article carried out surveys to determine what kind of recycled material collection services are preferred by consumers. The results clarify that incentive or reward money alone is not a driving force for recycling behaviour. The article discusses the types of effective services required to promote recycling behaviour. The article concludes that securing information, transferring data and providing proper information about resources and environment can be an effective tool to encourage a recycling behaviour strategy to promote recycling, plus the potential discount service on purchasing new products associated with the return of recycled mobile phones. © The Author(s) 2015.

12 CFR 1030.11 - Additional disclosure requirements for overdraft services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... telephone response machine, ATM, or an institution's Internet site, is not a response to a consumer... electronic media, such as television or radio; (iv) An advertisement made on outdoor media, such as...

12 CFR 1030.11 - Additional disclosure requirements for overdraft services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... telephone response machine, ATM, or an institution's Internet site, is not a response to a consumer... electronic media, such as television or radio; (iv) An advertisement made on outdoor media, such as...

12 CFR 1030.11 - Additional disclosure requirements for overdraft services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... telephone response machine, ATM, or an institution's Internet site, is not a response to a consumer... electronic media, such as television or radio; (iv) An advertisement made on outdoor media, such as...

Wheelchair User Injuries and Deaths Associated with Motor Vehicle Related Incidents

DOT National Transportation Integrated Search

1997-09-01

National Highway Traffic Safety Administration's National Center for Statistics : and Analysis (NCSA) recently completed a study of data from the Consumer Product : Safety Commission's (CPSC) National Electronic Injury Surveillance System : (NEISS) o...

77 FR 13127 - Agency Information Collection Activities; Proposed Collection; Comment Request; Extension

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-05

... electronics, small appliances, furniture, and other transactions. (Only consumer leases for more than four... transactions reflect a net decrease from prior FTC estimates, given current market conditions and the new PRA...

A Delphi Study Assessing Long-Term Access to Electronic Medical Records (EMR)

DTIC Science & Technology

2008-03-01

Americans surveyed would prefer physicians and insurance companies that use electronic medical records to those that do not (Swartz, 2007). Based on...procedures performed or medication(s) issued for health history and insurance purposes. A large portion of a physician’s workday is consumed with...disconnect existed between the Social Uses Life/Health Insurance Employment/Licensing Public Health Medical Research Social/Welfare Programs Law

The Magnesium Industry Today…The Global Perspective

NASA Astrophysics Data System (ADS)

Patzer, Greg

World demand for magnesium will show a decline in 2009. The outlook for 2010, which is guardedly optimistic, will be for a resumption of slow growth. The industry has seen marked changes in the sources of supply for primary and alloyed magnesium in recent years. Technological advances in magnesium continue at a strong pace as does interest in the material as a substitute for other light metals. The automotive segment remains the end-use area with the largest growth potential, if for no other reason than the size and quantity of the potential materials substitution applications. However, the shrinkage of that market, particularly in North America will have a definite impact on expectations for magnesium. The 3C market (computers, communications & consumer electronics) will continue to show above average growth. Other niche markets related to medical and construction industries also offer potential.

Consumer attitude towards sodium reduction in meat products and acceptability of fermented sausages with reduced sodium content.

PubMed

Guàrdia, M D; Guerrero, L; Gelabert, J; Gou, P; Arnau, J

2006-07-01

Lowering salt content in meat products is possible from a technological and sensorial point of view, although little information is available about the consumers' attitude and acceptance of these products. Attitude towards low salt meat products, following the Theory of Planned Behaviour (TPB) proposed by Ajzen, was evaluated by 392 consumers. Acceptability of small calibre fermented sausages with 50% molar substitution of NaCl by six different mixtures of KCl (0-50%) and K-lactate (0-50%) and the control (22g NaCl/kg) was determined by 98 consumers. The preference of the previous best two treatments was compared to the batch control by 279 consumers. In general consumers had a positive attitude towards low salt meat products, being higher for women than for men. Women showed stronger ideas and higher Perceived Control on the Behaviour towards reduced sodium meat products than men. Smokers showed lower intense beliefs than non-smokers. Consumers with a basic level of education were more affected by what other people important for them thought they should do. The final model obtained using the Theory of Planned Behaviour showed a good predictive capacity (R(2)=0.60) and a good internal consistency. Regarding the acceptability study, batches with substitution levels of 50% and 40% by K-lactate, showed lower overall acceptance than the control batch. Significant differences in acceptability were found regarding the gender and place of residence of the consumers. The preference study showed no differences between the batch control and batches with 50% KCl and 40% KCl + 10% of K-lactate substitution levels. According to these results and from a sensorial point of view, it is possible to reduce NaCl content in small calibre fermented sausages by 50% and obtain a product acceptable for consumers.

Public attitudes toward health information exchange: perceived benefits and concerns.

PubMed

Dimitropoulos, Linda; Patel, Vaishali; Scheffler, Scott A; Posnack, Steve

2011-12-01

To characterize consumers' attitudes regarding the perceived benefits of electronic health information exchange (HIE), potential HIE privacy and security concerns, and to analyze the intersection of these concerns with perceived benefits. A cross-sectional study. A random-digit-dial telephone survey of English-speaking adults was conducted in 2010. Multivariate logistic regression models examined the association between consumer characteristics and concerns related to the security of electronic health records (EHRs) and HIE. A majority of the 1847 respondents reported they were either "very" or "somewhat" concerned about privacy of HIE (70%), security of HIE (75%), or security of EHRs (82%). Concerns were significantly higher (P <.05) among employed individuals 40 to 64 years old and minorities. Many believed that HIE would confer benefits such as improved coordination of care (89%). Overall, 75% agreed that the benefits of EHRs outweighed risks to privacy and security, and 60% would permit HIE for treatment purposes even if the physician might not be able to protect their privacy all of the time. Over half (52%) wanted to choose which providers access and share their data. Greater participation by consumers in determining how HIE takes place could engender a higher degree of trust among all demographic groups, regardless of their varying levels of privacy and security concerns. Addressing the specific privacy and security concerns of minorities, individuals 40 to 64 years old, and employed individuals will be critical to ensuring widespread consumer participation in HIE.

Energy services in the information age: The convergence of energy, communications, and information technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Centolella, P.A.

1998-07-01

Most of the economic efficiency benefits of electric restructuring--consumer choice based on price and risk preferences, efficient capacity utilization, capacity expansion that reflects marketability, and innovative products--depend upon consumer access to information and opportunities to respond to time- and location-specific prices and customized products. Information and communications technologies from back-room data management centers to intelligent consumer gateways will play an essential role in marketing energy services in a retail access environment. This paper describes the role of information and communications technology in electric industry restructuring and retailing of energy services. It includes a survey of economic analyses on the likelymore » variability in competitive generation prices and consumer responses if such prices are effectively communicated. The paper describes the potential benefits and cost savings associated with flexible consumer responses to price variability. It identifies consumer loads and preferences. Finally, the paper describes the building blocks of information systems being developed to facilitate price-responsive energy management and provide a range of other energy services. Intelligent gateways, analytical tools for facility load prediction and optimizing energy management responses, and electronic commerce applications are discussed.« less

The Green Synthesis and Evaluation of Silver Nanoparticles and Zinc Oxide Nanoparticles

NASA Astrophysics Data System (ADS)

Gebear-Eigzabher, Bellsabel

Nanoparticle (NP) research has received exceptional attention as the field of study that contributes to transforming the world of materials science. When implementing NPs in consumer and industrial products, their unique properties improve technologies to the extent of significant game-changing breakthroughs. Conversely, the increased production of NPs, their use, their disposal or inadvertent release in the environment drove the need for processes and policies that ensures consumer and environmental safety. Mitigation of any harmful effects that NPs could potentially have combines methods of safe preparation, safe handling and safe disposal as well as containment of any inadvertent release. Our focus is in safe preparation of nanomaterials and we report green and energy efficient synthesis methods for metal NPs and metal oxide NPs of two popular materials: silver (Ag) and zinc oxide (ZnO). The thesis explained: 1) The impact of NPs in nowadays' world; 2) Synthesis methods that were designed to include environmentally-friendly staring materials and energy-saving fabrication processes, with emphasis on maintaining NPs final size and morphology when compared with existing methods; and 3) Nanoparticles characterization and data collection which allowed us to determine and/or validate their properties. Nanoparticles were studied using transmission electron microscope (TEM), X-Ray powder diffraction (XRD), low-voltage (5 keV) transmission electron microscopy (LV EM 5), Fourier-Transform Infrared Spectroscopy (FT-IR), and Ultraviolet-Visible (UV-Vis) spectroscopy. We developed an aqueous-based preparation of zinc oxide nanoparticles (ZnO NPs) using microwave-assisted chemistry to render a well-controlled particle size distribution within each set of reaction conditions in the range of 15 nm to 75 nm. We developed a scalable silver nanoparticles synthesis by chemical reduction methods. The NPs could be used in consumer products. The measurement tools for consumer products were also used on in-house synthesized Ag NPs. Commercially available silver nanoparticles have been compared with the in-house synthesized ones and characterized by Photothermal Lens (PTL) Spectroscopy. In respect to particle size and morphology, the Ag NPs synthesized by chemical reduction methods are similar to Ag nanoparticle solution available in the market. However, the synthesized nanoparticles are high in concentration and do not show signs of aggregation or agglomeration. It was concluded that our Ag NPs are superior to the commercially available ones by exhibiting large concentrations in ultra-stable dispersions.

Effect of meat appearance on consumer preferences for pork chops in Greece and Cyprus.

PubMed

Fortomaris, P; Arsenos, G; Georgiadis, M; Banos, G; Stamataris, C; Zygoyiannis, D

2006-04-01

The effect of meat appearance on consumers' preferences for pork chops was assessed using images manipulated for appearance characteristics. Data were collected from 412 consumers in Greece and Cyprus. Consumers were asked for their preference for pork chops from a book of computer-modified images and then completed a questionnaire of socio-demographic information, including eating and purchasing behaviour. Consumers under the age of 35 years showed preferences for dark red, lean pork, while consumers aged 35 years and older preferred either dark or light red pork. Gender appeared to be an important selection factor as men showed an increased preference for dark red pork while women preferred the light red. Consumers who stated that they like pork for its taste (91%) preferred either dark or light red pork chops while those who like pork for reasons other than taste preferred dark red, lean pork. Urban consumers preferred light red, fatty pork chops while the rural consumers preferred the dark red pork chops.

Electricity generation in microbial fuel cells using neutral red as an electronophore

DOE Office of Scientific and Technical Information (OSTI.GOV)

Park, D.H.; Zeikus, J.G.

2000-04-01

Neutral red (NR) was utilized as an electron mediator in microbial fuel cells consuming glucose to study both its efficiency during electricity generation and its role in altering anaerobic growth and metabolism of Escherichia coli and Actinobacillus succinogenes. A study of chemical fuel cells in which NADH, NR, and ferricyanide were the electron donor, the electronophore, and the electron acceptor, respectively, showed that electrical current produced from NADH was proportional to the concentration of NADH. Fourfold more current was produced from NADH in chemical fuel cells when NR was the electron mediator than when thionin was the electron mediator. Inmore » microbial fuel cells in which E. coli resting cells were used the amount of current produced from glucose when NR was the electron mediator was 10-fold more than the amount produced when thionin was the electron mediator. The amount of electrical energy generated and the amount of current produced from glucose in NR-mediated microbial fuel cells containing either E. coli or A. succinogenes were about 10- and 2-fold greater, respectively, when resting cells were used than when growing cells were used. Cell growth was inhibited substantially when these microbial fuel cells were making current, and more oxidized end products were formed under these conditions. When sewage sludge was used in the fuel cell, stable and equivalent levels of current were obtained with glucose, as observed in the pure-culture experiments. These results suggest that NR is better than other electron mediators used in microbial fuel cells and that sludge production can be decreased while electricity is produced in fuel cells. Their results are discussed in relation to factors that may improve the relatively low electrical efficiencies obtained with microbial fuel cells.« less

Multilayered Electromagnetic Interference Shielding Structures for Suppressing Magnetic Field Coupling

NASA Astrophysics Data System (ADS)

Watanabe, Atom O.; Raj, Pulugurtha Markondeya; Wong, Denny; Mullapudi, Ravi; Tummala, Rao

2018-05-01

Control of electromagnetic interference (EMI) represents a major challenge for emerging consumer electronics, the Internet of Things, automotive electronics, and wireless communication systems. This paper discusses innovative EMI shielding materials and structures that offer higher shielding effectiveness compared with copper. To create high shielding effectiveness in the frequency range of 1 MHz to 100 MHz, multilayered shielding topologies with electrically conductive and nanomagnetic materials were modeled, designed, fabricated, and characterized. In addition, suppression of out-of-plane and in-plane magnetic-field coupling noise with these structures is compared with that of traditional single-layer copper or nickel-iron films. Compared with single-layered copper shields, multilayered structures consisting of copper, nickel-iron, and titanium showed a 3.9 times increase in shielding effectiveness in suppressing out-of-plane or vertically coupled noise and 1.3 times increase in lateral coupling. The superiority of multilayered thin-film shields over conventional shielding enables greater design flexibility, higher shielding effectiveness, and further miniaturization of emerging radiofrequency (RF) and power modules.

Ultrawideband Electromagnetic Interference to Aircraft Radios

NASA Technical Reports Server (NTRS)

Ely, Jay J.; Fuller, Gerald L.; Shaver, Timothy W.

2002-01-01

A very recent FCC Final Rule now permits marketing and operation of new products that incorporate Ultrawideband (UWB) technology into handheld devices. Wireless product developers are working to rapidly bring this versatile, powerful and expectedly inexpensive technology into numerous consumer wireless devices. Past studies addressing the potential for passenger-carried portable electronic devices (PEDs) to interfere with aircraft electronic systems suggest that UWB transmitters may pose a significant threat to aircraft communication and navigation radio receivers. NASA, United Airlines and Eagles Wings Incorporated have performed preliminary testing that clearly shows the potential for handheld UWB transmitters to cause cockpit failure indications for the air traffic control radio beacon system (ATCRBS), blanking of aircraft on the traffic alert and collision avoidance system (TCAS) displays, and cause erratic motion and failure of instrument landing system (ILS) localizer and glideslope pointers on the pilot horizontal situation and attitude director displays. This paper provides details of the preliminary testing and recommends further assessment of aircraft systems for susceptibility to UWB electromagnetic interference.

1-dimension nano-material-based flexible device

NASA Astrophysics Data System (ADS)

Yang, Xing; Zhou, Zhaoying; Zheng, Fuzhong

2009-11-01

1D nano-material-based flexible devices has attracted considerable attention owing to the growing need of the high-sensitivity flexible sensor, portable consumer electronics etc.. In this paper, the 1D nano-materials-based flexible device on polyimide substrate was proposed. The bottom-up and top-down combined process were used for constructing the ZnO nanowire and the CNT-based flexible devices. Their electrical characteristics were also investigated. The measurement results demonstrate that the flexible device covered with a layer of Al2O3 has good ohm electrical contact behavior between the nano-material and micro-electrodes. The proposed 1D nano-material-based flexible device shows the application potential in the sensing fields.

Sectorial analysis of nanotechnology companies in Argentina

NASA Astrophysics Data System (ADS)

Foladori, Guillermo; Lau, Edgar Záyago; Carroza, Tomás; Appelbaum, Richard P.; Villa, Liliana; Robles-Belmont, Eduardo

2017-06-01

In this paper, we identify 37 companies that produce nano-enabled products in Argentina. We locate the products of these firms in terms of both their economic sector and position in a value chain. The research was done through a four-step methodology. Firstly, an inventory of firms was created. Secondly, the firms were classified by their economic sector, following the United Nations economic classification. Thirdly, the firms were located within a simple nanotechnology value chain. Finally, the products were classified according to their final destination, being either means of production or final consumer products. The results show that healthcare, cosmetics, and medicine is the most represented sector along the value chain, followed by electronics.

Nanometer-scale sizing accuracy of particle suspensions on an unmodified cell phone using elastic light scattering.

PubMed

Smith, Zachary J; Chu, Kaiqin; Wachsmann-Hogiu, Sebastian

2012-01-01

We report on the construction of a Fourier plane imaging system attached to a cell phone. By illuminating particle suspensions with a collimated beam from an inexpensive diode laser, angularly resolved scattering patterns are imaged by the phone's camera. Analyzing these patterns with Mie theory results in predictions of size distributions of the particles in suspension. Despite using consumer grade electronics, we extracted size distributions of sphere suspensions with better than 20 nm accuracy in determining the mean size. We also show results from milk, yeast, and blood cells. Performing these measurements on a portable device presents opportunities for field-testing of food quality, process monitoring, and medical diagnosis.

GPAW - massively parallel electronic structure calculations with Python-based software.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Enkovaara, J.; Romero, N.; Shende, S.

2011-01-01

Electronic structure calculations are a widely used tool in materials science and large consumer of supercomputing resources. Traditionally, the software packages for these kind of simulations have been implemented in compiled languages, where Fortran in its different versions has been the most popular choice. While dynamic, interpreted languages, such as Python, can increase the effciency of programmer, they cannot compete directly with the raw performance of compiled languages. However, by using an interpreted language together with a compiled language, it is possible to have most of the productivity enhancing features together with a good numerical performance. We have used thismore » approach in implementing an electronic structure simulation software GPAW using the combination of Python and C programming languages. While the chosen approach works well in standard workstations and Unix environments, massively parallel supercomputing systems can present some challenges in porting, debugging and profiling the software. In this paper we describe some details of the implementation and discuss the advantages and challenges of the combined Python/C approach. We show that despite the challenges it is possible to obtain good numerical performance and good parallel scalability with Python based software.« less

Femtosecond laser ablation of gold interdigitated electrodes for electronic tongues

NASA Astrophysics Data System (ADS)

Manzoli, Alexandra; de Almeida, Gustavo F. B.; Filho, José A.; Mattoso, Luiz H. C.; Riul, Antonio; Mendonca, Cleber R.; Correa, Daniel S.

2015-06-01

Electronic tongue (e-tongue) sensors based on impedance spectroscopy have emerged as a potential technology to evaluate the quality and chemical composition of food, beverages, and pharmaceuticals. E-tongues usually employ transducers based on metal interdigitated electrodes (IDEs) coated with a thin layer of an active material, which is capable of interacting chemically with several types of analytes. IDEs are usually produced by photolithographic methods, which are time-consuming and costly, therefore, new fabrication technologies are required to make it more affordable. Here, we employed femtosecond laser ablation with pulse duration of 50 fs to microfabricate gold IDEs having finger width from 2.3 μm up to 3.2 μm. The parameters used in the laser ablation technique, such as light intensity, scan speed and beam spot size have been optimized to achieve uniform IDEs, which were characterized by optical and scanning electron microscopy. The electrical properties of gold IDEs fabricated by laser ablation were evaluated by impedance spectroscopy, and compared to those produced by conventional photolithography. The results show that femtosecond laser ablation is a promising alternative to conventional photolithography for fabricating metal IDEs for e-tongue systems.

What do we know about the effects of exposure to 'Low alcohol' and equivalent product labelling on the amounts of alcohol, food and tobacco people select and consume? A systematic review.

PubMed

Shemilt, Ian; Hendry, Vivien; Marteau, Theresa M

2017-01-12

Explicit labelling of lower strength alcohol products could reduce alcohol consumption by attracting more people to buy and drink such products instead of higher strength ones. Alternatively, it may lead to more consumption due to a 'self-licensing' mechanism. Equivalent labelling of food or tobacco (for example "Low fat" or "Low tar") could influence consumption of those products by similar mechanisms. This systematic review examined the effects of 'Low alcohol' and equivalent labelling of alcohol, food and tobacco products on selection, consumption, and perceptions of products among adults. A systematic review was conducted based on Cochrane methods. Electronic and snowball searches identified 26 eligible studies. Evidence from 12 randomised controlled trials (all on food) was assessed for risk of bias, synthesised using random effects meta-analysis, and interpreted in conjunction with evidence from 14 non-randomised studies (one on alcohol, seven on food and six on tobacco). Outcomes assessed were: quantities of the product (i) selected or (ii) consumed (primary outcomes - behaviours), (iii) intentions to select or consume the product, (iv) beliefs associated with it consumption, (v) product appeal, and (vi) understanding of the label (secondary outcomes - cognitions). Evidence for impacts on the primary outcomes (i.e. amounts selected or consumed) was overall of very low quality, showing mixed effects, likely to vary by specific label descriptors, products and population characteristics. Overall very low quality evidence suggested that exposure to 'Low alcohol' and equivalent labelling on alcohol, food and tobacco products can shift consumer perceptions of products, with the potential to 'self-licence' excess consumption. Considerable uncertainty remains about the effects of labels denoting low alcohol, and equivalent labels, on alcohol, food and tobacco selection and consumption. Independent, high-quality studies are urgently needed to inform policies on labelling regulations.

Organic electronics: Battery-like artificial synapses

NASA Astrophysics Data System (ADS)

Yang, J. Joshua; Xia, Qiangfei

2017-04-01

Borrowing the operating principles of a battery, a three-terminal organic switch has been developed on a flexible plastic substrate. The device consumes very little power and can be used as an artificial synapse for brain-inspired computing.

Sorption of Organophosphorus Flame Retardants on Settled Dust

EPA Science Inventory

Organophosphorus flame retardants (OPFRs) are widely used as additives in industrial and consumer products such as electrical and electronic products, furniture, plastics, textiles, and building/construction materials. Due to human exposure and potential health effects, OPFRs inc...

Are You Taking the Right Treatment for Your High Cholesterol?

MedlinePlus

... Student Debt Special Report All Money More on Money Best & Worst Banks According to Consumer Reports Members ... Appliances Babies & Kids Cars Electronics Health Home & Garden Money A-Z Index Magazine & Books Current Issue Magazine ...

Health Informatics.

ERIC Educational Resources Information Center

Russell, Marie; Brittain, J. Michael

2002-01-01

Identifies current trends and issues in health informatics with examples of applications, particularly in English-speaking countries. Topics include health systems, professionals, and patients; consumer health information; electronic medical records; nursing; privacy and confidentiality; finding and using information; the Internet; e-mail;…

Can an iPod Touch be used to assess whole-body vibration associated with mining equipment?

PubMed

Wolfgang, Rebecca; Di Corleto, Luke; Burgess-Limerick, Robin

2014-11-01

The cost and complexity of commercially available whole-body vibration measurement devices is a barrier to the systematic collection of the information required to manage this hazard. The potential for a consumer electronic device to be used to estimate whole-body vibration was assessed by collecting 58 simultaneous pairs of acceleration measurements in three dimensions from a fifth-generation iPod Touch and gold standard whole-body vibration measurement devices, while a range of heavy mining equipment was operated at three surface coal mines. The results suggest that accelerometer data gathered from a consumer electronic device are able to be used to measure whole-body vibration amplitude with 95% confidence of ±0.06 m s(-2) root mean square for the vertical direction (1.96 × standard deviation of the constant error). © The Author 2014. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Organic core-sheath nanowire artificial synapses with femtojoule energy consumption.

PubMed

Xu, Wentao; Min, Sung-Yong; Hwang, Hyunsang; Lee, Tae-Woo

2016-06-01

Emulation of biological synapses is an important step toward construction of large-scale brain-inspired electronics. Despite remarkable progress in emulating synaptic functions, current synaptic devices still consume energy that is orders of magnitude greater than do biological synapses (~10 fJ per synaptic event). Reduction of energy consumption of artificial synapses remains a difficult challenge. We report organic nanowire (ONW) synaptic transistors (STs) that emulate the important working principles of a biological synapse. The ONWs emulate the morphology of nerve fibers. With a core-sheath-structured ONW active channel and a well-confined 300-nm channel length obtained using ONW lithography, ~1.23 fJ per synaptic event for individual ONW was attained, which rivals that of biological synapses. The ONW STs provide a significant step toward realizing low-energy-consuming artificial intelligent electronics and open new approaches to assembling soft neuromorphic systems with nanometer feature size.

An electronic consumer health library: NetWellness.

PubMed Central

Guard, R; Haag, D; Kaya, B; Marine, S; Morris, T; Schick, L; Shoemaker, S

1996-01-01

NetWellness is a community-based, consumer-defined grant program supporting the delivery of electronic health information to rural residents of southern Ohio and urban and suburban communities in the Greater Cincinnati tri-state region. NetWellness is a collaboratively developed and publicly and privately funded demonstration project. Information is delivered via ISDN, standard dial, dedicated network connections, and the Internet. TriState Online (Greater Cincinnati's Free-Net) and other southern Ohio Free-Nets are key access points in the larger project communities. The other access points are more than forty workstations distributed at public sites throughout the project's primary geographical area. Design strengths and limitations, training initiatives, technical issues, and the project's impact on medical librarianship are examined in this paper. Also discussed are ways of determining community needs and interest, building political alliances, finding and developing funding sources, and overcoming technical obstacles. NetWellness's Internet address is: http:@www.netwellness.org. PMID:8913548

Expert Panels, Consumers, and Chemistry.

ERIC Educational Resources Information Center

Rehfeldt, Thomas K.

2000-01-01

Studied the attributes, properties, and consumer acceptance of antiperspirant products through responses of 400 consumers (consumer data), expert panel data, and analytical data about the products. Results show how the Rasch model can provide the tool necessary to combine data from several sources. (SLD)

Consumer Health Information Needs and Question Classification: Analysis of Hypertension Related Questions Asked by Consumers on a Chinese Health Website.

PubMed

Guo, Haihong; Li, Jiao; Dai, Tao

2015-01-01

This study built up a classification schema of consumer health questions which consisted of 48 quaternary categories and 35 annotation rules. Using such a schema, we manually classified 2,000 questions randomly selected from nearly 100 thousand hypertension-related messages posted by consumers on a Chinese health website to analyze the information needs of health consumers. The results showed questions in the categories of treatment, diagnosis, healthy lifestyle, management, epidemiology, and health provider choosing were 48.1%, 23.8%, 11.9%, 5.2%, 9.0%, and 1.9% respectively. The comparison of the questions asked by consumers and physicians showed that their health information needs were significantly different (P<0.0001).

A qualitative study of Swedes' opinions about shared electronic health records.

PubMed

Lehnbom, Elin C; McLachlan, Andrew J; Brien, Jo-anne E

2013-01-01

European countries are world-leading in the development and implementation of e-Health. In Sweden, all primary healthcare centres and most hospitals use digital records. Some regions use the same software which allows for clinical information to be shared (regionally shared EHRs), but there is a movement towards making all EHRs inter-operable to allow for a National Patient Summary (NPS). The aim of this study was to explore the opinions of Swedish consumers and health professionals about shared EHRs and the NPS. Semi-structered phone interviews were conducted with consumers and health professionals. The majority of interviewed health professionals were currently using regionally shared EHRs. In their experience, having access to regionally shared EHRs facilitated a holistic patient approach, assisted in patient follow-up, and reduced inappropriate (over)prescribing. Consumers had a poor level of knowledge about shared EHRs and the NPS. Unlike health professionals, consumers perceived a NPS to be of great value. The findings indicate that there was a discrepancy between health professionals and consumers' knowledge of, and the perceived need for, a NPS.

Insinuating electronics in the brain.

PubMed

Hughes, Mark A

2016-08-01

There is an expanding interface between electronic engineering and neurosurgery. Rapid advances in microelectronics and materials science, driven largely by consumer demand, are inspiring and accelerating development of a new generation of diagnostic, therapeutic, and prosthetic devices for implantation in the nervous system. This paper reviews some of the basic science underpinning their development and outlines some opportunities and challenges for their use in neurosurgery. Copyright © 2016 The Author. Published by Elsevier Ltd.. All rights reserved.

Biodegradation of Polychlorinated Methanes in Methanogenic Systems

DTIC Science & Technology

1991-01-01

occurring toxicant and C-1 growth substrate. J. General Microbiol. 132:1139-1142. 18. Hoover, S. R. and N. Porges. 1952. Assimilation of dairy wastes by...carbon and electron donor source; (3) to examine the level of micronutrients - provided as yeast extract (YE) - needed in the system feed; (4) to...provided the electron donor needed to consume oxygen and lower the redox potential in the precolumn; YE provided micronutrients . No reductant (Na2S

Membranes in Lithium Ion Batteries

PubMed Central

Yang, Min; Hou, Junbo

2012-01-01

Lithium ion batteries have proven themselves the main choice of power sources for portable electronics. Besides consumer electronics, lithium ion batteries are also growing in popularity for military, electric vehicle, and aerospace applications. The present review attempts to summarize the knowledge about some selected membranes in lithium ion batteries. Based on the type of electrolyte used, literature concerning ceramic-glass and polymer solid ion conductors, microporous filter type separators and polymer gel based membranes is reviewed. PMID:24958286

Physiological function of hydrogen metabolism during growth of sulfidogenic bacteria on organic substrates.

PubMed Central

Lupton, F S; Conrad, R; Zeikus, J G

1984-01-01

Desulfovibrio vulgaris Madison and Thermodesulfobacterium commune contained functionally distinct hydrogenase activities, one which exchanged 3H2 into 3H2O and was inhibited by carbon monoxide and a second activity which produced H2 in the presence of CO. Cell suspensions of D. vulgaris used either lactate, pyruvate, or CO as the electron donor for H2 production in the absence of sulfate. Both sulfidogenic species produced and consumed hydrogen as a trace gas during growth on lactate or pyruvate as electron donors and on thiosulfate or sulfate as electron acceptors. Higher initial levels of hydrogen were detected during growth on lactate-sulfate than on pyruvate-sulfate. D. vulgaris but not T. commune also produced and then consumed CO during growth on organic electron donors and sulfate or thiosulfate. High partial pressures of exogenous H2 inhibited growth and substrate consumption when D. vulgaris was cultured on pyruvate alone but not when it was metabolizing pyruvate plus sulfate or lactate plus sulfate. The data are discussed in relation to supporting two different models for the physiological function of H2 metabolism during growth of sulfidogenic bacteria on organic electron donors plus sulfate. A trace H2 transformation model is proposed for control of redox processes during growth on either pyruvate or lactate plus sulfate, and an obligate H2 cycling model is proposed for chemiosmotic energy coupling during growth on CO plus sulfate. PMID:6480553

Sale of prescription drugs over the Internet.

PubMed

Armstrong, K; Bloom, B S

1999-01-01

Online drugstores represent one of the hottest categories in electronic commerce. The Internet offers great promise in expanding access to prescription drugs for the disabled, the elderly, and people living in rural areas. But with this promise comes the danger of eliminating the safeguards that protect consumers from inappropriate use of medications and adverse drug events. This Issue Brief highlights two studies that investigate the availability of prescription drugs over the Internet, and focuses on the alarming ease with which consumers can obtain drugs without seeing a physician or a pharmacist.

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Energy storage, which has revolutionized consumer electronics, is poised to change the way we drive our cars and the way we generate and use electricity. Leveraging four decades of numerous path-breaking innovations in energy storage, Argonne is leading the way in ushering in this change.

HEALTH RISK ASSESSMENT OF ENGINEERED-MANUFACTURED NANOMATERIALS: RESEARCH CHALLENGES AND PRELIMINARY FINDINGS

EPA Science Inventory

Nanotechnology continues to produce a diversity of engineered nanomaterials (NMs), displaying novel physicochemical properties with applications in commercial, consumer, electronic, biomedical, energy, and environmental sectors. Nanotechnology has been referred to as the next in...

Sorption of Organophosphorus Flame-Retardants on Settled Dust

EPA Science Inventory

Dust is an important sink for indoor air pollutants, such as organophosphorus flame-retardants (OPFRs) that are used as additives in industrial and consumer products including electrical and electronic products, furniture, plastics, textile, and building/construction materials. T...

NANOMATERIAL HEALTH EFFECTS RESEARCH CONTRIBUTES TO RISK MANAGEMENT STRATEGIES THROUGH THE RISK ASSESSMENT PARADIGM

EPA Science Inventory

Nanotechnology continues to produce a diversity of engineered nanomaterials displaying novel physicochemical properties with applications in commercial, consumer, electronic, biomedical, energy, and environmental sectors. Nanotechnology has been referred to as the next industrial...

Sorption of Organophosphorus Flame Retardants (OPFRs) on Settled Dust

EPA Science Inventory

Organophosphorus flame retardants (OPFRs) are widely used as additives in industrial and consumer products such as electrical and electronic products, furniture, plastics, textiles, and building/construction materials. Due to human exposure and potential health effects, OPFRs inc...

A questions-based investigation of consumer mental-health information.

PubMed

Crangle, Colleen E; Kart, Joyce Brothers

2015-01-01

Despite the wealth of mental-health information available online to consumers, research has shown that the mental-health information needs of consumers are not being met. This study contributes to that research by soliciting consumer questions directly, categorizing them, analyzing their form, and assessing the extent to which they can be answered from a trusted and vetted source of online information, namely the website of the US National Institute of Mental Health (NIMH). As an alternative to surveys and analyses of online activity, this study shows how consumer questions provide new insight into what consumers do not know and how they express their information needs. The study crowdsourced 100 consumer questions through Amazon Inc.'s Mechanical Turk. Categorization of the questions shows broad agreement with earlier studies in terms of the content of consumer questions. It also suggests that consumers' grasp of mental health issues may be low compared to other health topics. The majority of the questions (74%) were simple in form, with the remainder being multi-part, multifaceted or narrative. Even simple-form questions could, however, have complex interpretations. Fifty four questions were submitted to the search box at the NIMH website. For 32 questions, no answer could be found in the top one to three documents returned. Inadequacies in the search and retrieval technology deployed at websites account for some of the failure to find answers. The nature of consumer questions in mental health also plays a role. A question that has a false presupposition is less likely to have an answer in trusted and vetted sources of information. Consumer questions are also expressed with a degree of specificity that makes the retrieval of relevant information difficult. The significance of this study is that it shows what an analysis of consumer mental-health questions can tell us about consumer information needs and it provides new insight into the difficulties facing consumers looking for answers to their questions in online resources.

Analyzing Residential End-Use Energy Consumption Data to Inform Residential Consumer Decisions and Enable Energy Efficiency Improvements

NASA Astrophysics Data System (ADS)

Carlson, Derrick R.

While renewable energy is in the process of maturing, energy efficiency improvements may provide an opportunity to reduce energy consumption and consequent greenhouse gas emissions to bridge the gap between current emissions and the reductions necessary to prevent serious effects of climate change and will continue to be an integral part of greenhouse gas emissions policy moving forward. Residential energy is a largely untapped source of energy reductions as consumers, who wish to reduce energy consumption for monetary, environmental, and other reasons, face barriers. One such barrier is a lack of knowledge or understanding of how energy is consumed in a home and how to reduce this consumption effectively through behavioral and technological changes. One way to improve understanding of residential energy consumption is through the creation of a model to predict which appliances and electronics will be present and significantly contribute to the electricity consumption of a home on the basis of various characteristics of that home. The basis of this model is publically available survey data from the Residential Energy Consumption Survey (RECS). By predicting how households are likely to consume energy, homeowners, policy makers, and other stakeholders have access to valuable data that enables reductions in energy consumption in the residential sector. This model can be used to select homes that may be ripe for energy reductions and to predict the appliances that are the basis of these potential reductions. This work suggests that most homes in the U.S. have about eight appliances that are responsible for about 80% of the electricity consumption in that home. Characteristics such as census region, floor space, income, and total electricity consumption affect which appliances are likely to be in a home, however the number of appliances is generally around 8. Generally it takes around 4 appliances to reach the 50% threshold and 12 appliances to reach 90% of electricity consumption, which suggests significant diminishing returns for parties interested in monitoring appliance level electricity consumption. Another way to improve understanding of residential energy consumption is through the development of residential use phase energy vectors for use in the Economic Input-Output Life Cycle Assessment (EIO-LCA) model. The EIO-LCA model is a valuable scoping tool to predict the environmental impacts of economic activity. This tool has a gap in its capabilities as residential use phase energy is outside the scope of the model. Adding use phase energy vectors to the EIO-LCA model will improve the modeling, provide a more complete estimation of energy impacts and allow for embedded energy to be compared to use phase energy for the purchase of goods and services in the residential sector. This work adds 21 quads of energy to the residential energy sector for the model and 15 quads of energy for personal transportation. These additions represent one third of the total energy consumption of the United States and a third of the total energy in the EIO-LCA model. This work also demonstrates that for many products such as electronics and household appliances use phase energy demands are much greater than manufacturing energy demands and dominate the life cycles for these products. A final way in which this thesis improves upon the understanding of how use phase energy is consumed in a home is through the exploration of potential energy reductions in a home. This analysis selects products that are used or consumed in a home, and explores the potential for reductions in the embedded manufacturing and use phase energy of that product using EIO-LCA and the energy vectors created in Chapter 3. The results give consumers an understanding of where energy is consumed in the lifecycle of products that they purchase and provide policy makers with valuable information on how to focus or refocus policies that are aimed and reducing energy in the residential sector. This work finds that a majority of the energy consumed by retail products is consumed in the use phase of electronics and appliances. Consequently the largest potential reductions in residential energy use can be found in the same area. The work also shows that targeting reductions in the manufacturing energy for many products is likely to be an ineffective strategy for energy reductions with the exception of a select few products. Supply chain energy reductions may be more promising than manufacturing energy reductions, though neither is likely to be as effective as strategies that target use phase energy reductions.

Human mitochondrial haplogroup H: the highest VO2max consumer--is it a paradox?

PubMed

Martínez-Redondo, Diana; Marcuello, Ana; Casajús, José A; Ara, Ignacio; Dahmani, Yahya; Montoya, Julio; Ruiz-Pesini, Eduardo; López-Pérez, Manuel J; Díez-Sánchez, Carmen

2010-03-01

Mitochondrial background has been demonstrated to influence maximal oxygen uptake (VO(2max), in mLkg(-1)min(-1)), but this genetic influence can be compensated for by regular exercise. A positive correlation among electron transport chain (ETC) coupling, ATP and reactive oxygen species (ROS) production has been established, and mitochondrial variants have been reported to show differences in their ETC performance. In this study, we examined in detail the VO(2max) differences found among mitochondrial haplogroups. We recruited 81 healthy male Spanish Caucasian individuals and determined their mitochondrial haplogroup. Their VO(2max) was determined using incremental cycling exercise (ICE). VO(2max) was lower in J than in non-J haplogroup individuals (P=0.04). The H haplogroup was responsible for this difference (VO(2max); J vs. H; P=0.008) and this group also had significantly higher mitochondrial oxidative damage (mtOD) than the J haplogroup (P=0.04). In agreement with these results, VO(2max) and mtOD were positively correlated (P=0.01). Given that ROS production is the major contributor to mtOD and consumes four times more oxygen per electron than the ETC, our results strongly suggest that ROS production is responsible for the higher VO(2max) found in the H variant. These findings not only contribute to a better understanding of the mechanisms underneath VO(2max), but also help to explain some reported associations between mitochondrial haplogroups and mtOD with longevity, sperm motility, premature aging and susceptibility to different pathologies.

Consumer Outcomes After Implementing CommonGround as an Approach to Shared Decision Making.

PubMed

Salyers, Michelle P; Fukui, Sadaaki; Bonfils, Kelsey A; Firmin, Ruth L; Luther, Lauren; Goscha, Rick; Rapp, Charles A; Holter, Mark C

2017-03-01

The authors examined consumer outcomes before and after implementing CommonGround, a computer-based shared decision-making program. Consumers with severe mental illness (N=167) were interviewed prior to implementation and 12 and 18 months later to assess changes in active treatment involvement, symptoms, and recovery-related attitudes. Providers also rated consumers on level of treatment involvement. Most consumers used CommonGround at least once (67%), but few used the program regularly. Mixed-effects regression analyses showed improvement in self-reported symptoms and recovery attitudes. Self-reported treatment involvement did not change; however, for a subset of consumers with the same providers over time (N=83), the providers rated consumers as more active in treatment. This study adds to the growing literature on tools to support shared decision making, showing the potential benefits of CommonGround for improving recovery outcomes. More work is needed to better engage consumers in CommonGround and to test the approach with more rigorous methods.

Modern Electronic Devices: An Increasingly Common Cause of Skin Disorders in Consumers.

PubMed

Corazza, Monica; Minghetti, Sara; Bertoldi, Alberto Maria; Martina, Emanuela; Virgili, Annarosa; Borghi, Alessandro

2016-01-01

: The modern conveniences and enjoyment brought about by electronic devices bring with them some health concerns. In particular, personal electronic devices are responsible for rising cases of several skin disorders, including pressure, friction, contact dermatitis, and other physical dermatitis. The universal use of such devices, either for work or recreational purposes, will probably increase the occurrence of polymorphous skin manifestations over time. It is important for clinicians to consider electronics as potential sources of dermatological ailments, for proper patient management. We performed a literature review on skin disorders associated with the personal use of modern technology, including personal computers and laptops, personal computer accessories, mobile phones, tablets, video games, and consoles.

Propelling plastics into the circular economy - weeding out the toxics first.

PubMed

Leslie, H A; Leonards, P E G; Brandsma, S H; de Boer, J; Jonkers, N

2016-09-01

The Stockholm Convention bans toxic chemicals on its persistent organic pollutants (POPs) list in order to promote cleaner production and prevent POPs accumulation in the global environment. The original 'dirty dozen' set of POPs has been expanded to include some of the brominated diphenyl ether flame retardants (POP-BDEs). In addition to cleaner production, there is an urgent need for increased resource efficiency to address the finite amount of raw materials on Earth. Recycling plastic enhances resource efficiency and is part of the circular economy approach, but how clean are the materials we are recycling? With the help of a new screening method and detailed analyses, we set out to investigate where these largely obsolete BDEs were showing up in Dutch automotive and electronics waste streams, calculate mass flows and determine to what extent they are entering the new product chains. Our study revealed that banned BDEs and other toxic flame retardants are found at high concentrations in certain plastic materials destined for recycling markets. They were also found in a variety of new consumer products, including children's toys. A mass flow analysis showed that 22% of all the POP-BDE in waste electrical and electronic equipment (WEEE) is expected to end up in recycled plastics because these toxic, bioaccumulative and persistent substances are currently not effectively separated out of plastic waste streams. In the automotive sector, this is 14%, while an additional 19% is expected to end up in second-hand parts (reuse). These results raise the issue of delicate trade-offs between consumer safety/cleaner production and resource efficiency. As petroleum intensive materials, plastic products ought to be repaired, reused, remanufactured and recycled, making good use of the 'inner circles' of the circular economy. Keeping hazardous substances - whether they are well known POPs or emerging contaminants - out of products and plastic waste streams could make these cycles work better for businesses, people and nature. Copyright © 2016 Elsevier Ltd. All rights reserved.

Window-assisted nanosphere lithography for vacuum micro-nano-electronics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Nannan; Institute of Electronic Engineering, Chinese Academy of Engineering Physics, Mianyang, 621900; Pang, Shucai

2015-04-15

Development of vacuum micro-nano-electronics is quite important for combining the advantages of vacuum tubes and solid-state devices but limited by the prevailing fabricating techniques which are expensive, time consuming and low-throughput. In this work, window-assisted nanosphere lithography (NSL) technique was proposed and enabled the low-cost and high-efficiency fabrication of nanostructures for vacuum micro-nano-electronic devices, thus allowing potential applications in many areas. As a demonstration, we fabricated high-density field emitter arrays which can be used as cold cathodes in vacuum micro-nano-electronic devices by using the window-assisted NSL technique. The details of the fabricating process have been investigated. This work provided amore » new and feasible idea for fabricating nanostructure arrays for vacuum micro-nano-electronic devices, which would spawn the development of vacuum micro-nano-electronics.« less

Sources of product information used by consumers when purchasing kitchen cabinets.

Treesearch

Geoffrey H. Donovan; David L. Nicholls; Joseph Roos

2004-01-01

Survey data from home shows in Seattle, Washington and Anchorage, Alaska were used to determine the sources of product information used by consumers when buying kitchen cabinets. Results show that in-store sales staff are the most common source of product information, and that consumers' favorite wood species, age, and gender can influence the source of product...

Invitation to Consumer Behavior Analysis

ERIC Educational Resources Information Center

Foxall, Gordon R.

2010-01-01

This article presents an introduction to consumer behavior analysis by describing the Behavioral Perspective Model of consumer choice and showing how research has, first, confirmed this framework and, second, opened up behavior analysis and behavioral economics to the study of consumer behavior in natural settings. It concludes with a discussion…

Consumers' Preferences for Electronic Nicotine Delivery System Product Features: A Structured Content Analysis.

PubMed

Kistler, Christine E; Crutchfield, Trisha M; Sutfin, Erin L; Ranney, Leah M; Berman, Micah L; Zarkin, Gary A; Goldstein, Adam O

2017-06-07

To inform potential governmental regulations, we aimed to develop a list of electronic nicotine delivery system (ENDS) product features important to U.S. consumers by age and gender. We employed qualitative data methods. Participants were eligible if they had used an ENDS at least once. Groups were selected by age and gender (young adult group aged 18-25, n = 11; middle-age group aged 26-64, n = 9; and women's group aged 26-64, n = 9). We conducted five individual older adult interviews (aged 68-80). Participants discussed important ENDS features. We conducted a structured content analysis of the group and interview responses. Of 34 participants, 68% were white and 56% were female. Participants mentioned 12 important ENDS features, including: (1) user experience; (2) social acceptability; (3) cost; (4) health risks/benefits; (5) ease of use; (6) flavors; (7) smoking cessation aid; (8) nicotine content; (9) modifiability; (10) ENDS regulation; (11) bridge between tobacco cigarettes; (12) collectability. The most frequently mentioned ENDS feature was modifiability for young adults, user experience for middle-age and older adults, and flavor for the women's group. This study identified multiple features important to ENDS consumers. Groups differed in how they viewed various features by age and gender. These results can inform ongoing regulatory efforts.

Gold Nanomaterials in Consumer Cosmetics Nanoproducts: Analyses, Characterization, and Dermal Safety Assessment.

PubMed

Cao, Mingjing; Li, Jiayang; Tang, Jinglong; Chen, Chunying; Zhao, Yuliang

2016-10-01

Establishment of analytical methods of engineered nanomaterials in consumer products for their human and environmental risk assessment becomes urgent for both academic and industrial needs. Owing to the difficulties and challenges around nanomaterials in complex media, proper chemical separation and biological assays of nanomaterials from nanoproducts needs to be firstly developed. Herein, a facile and rapid method to separate and analyze gold nanomaterials in cosmetics is reported. Gold nanomaterials are successfully separated from different facial or eye creams and their physiochemical properties are analyzed by quantitative and qualitative state-of-the art techniques with high sensitivity or high spatial resolution. In turn, a protocol including quantification of gold by inductively coupled plasma mass spectrometry and thorough characterization of morphology, size distribution, and surface property by electron microscopes, atomic force microscope, and X-ray photoelectron spectroscope is developed. Subsequently, the preliminary toxicity assessment indicates that gold nanomaterials in cosmetic creams have no observable toxicity to human keratinocytes even after 24 h exposure up to a concentration of 200 μg mL -1 . The environmental scanning electron microscope reveals that gold nanomaterials are mostly attached on the cell membrane. Thus, the present study provides a full analysis protocol for toxicity assessment of gold nanomaterials in consumer products (cosmetic creams). © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Consumer Mobile Health Apps: Current State, Barriers, and Future Directions.

PubMed

Kao, Cheng-Kai; Liebovitz, David M

2017-05-01

This paper discusses the current state, barriers, and future directions of consumer-facing applications (apps). There are currently more than 165,000 mobile health apps publicly available in major app stores, the vast majority of which are designed for patients. The top 2 categories are wellness management and disease management apps, whereas other categories include self-diagnosis, medication reminder, and electronic patient portal apps. Apps specific to physical medicine and rehabilitation also are reviewed. These apps have the potential to provide low-cost, around-the-clock access to high-quality, evidence-based health information to end users on a global scale. However, they have not yet lived up to their potential due to multiple barriers, including lack of regulatory oversight, limited evidence-based literature, and concerns of privacy and security. The future directions may consist of improving data integration into the health care system, an interoperable app platform allowing access to electronic health record data, cloud-based personal health record across health care networks, and increasing app prescription by health care providers. For consumer mobile health apps to fully contribute value to health care delivery and chronic disease management, all stakeholders within the ecosystem must collaborate to overcome the significant barriers. Copyright © 2017 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.

EPA ENERGY STAR: Tackling Growth in Home Electronics and Small Appliances

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sanchez, Marla Christine; Brown, Richard; Homan, Gregory

2008-11-17

Over a decade ago, the electricity consumption associated with home electronics and other small appliances emerged onto the global energy policy landscape as one of the fastest growing residential end uses with the opportunity to deliver significant energy savings. As our knowledge of this end use matures, it is essential to step back and evaluate the degree to which energy efficiency programs have successfully realized energy savings and where savings opportunities have been missed.For the past fifteen years, we have quantified energy, utility bill, and carbon savings for US EPA?s ENERGY STAR voluntary product labeling program. In this paper, wemore » present a unique look into the US residential program savings claimed to date for EPA?s ENERGY STAR office equipment, consumer electronics, and other small household appliances as well as EPA?s projected program savings over the next five years. We present a top-level discussion identifying program areas where EPA?s ENERGY STAR efforts have succeeded and program areas where ENERGY STAR efforts did not successfully address underlying market factors, technology issues and/or consumer behavior. We end by presenting the magnitude of ?overlooked? savings.« less

E-waste management and sustainability: a case study in Brazil.

PubMed

Azevedo, Luís Peres; da Silva Araújo, Fernando Gabriel; Lagarinhos, Carlos Alberto Ferreira; Tenório, Jorge Alberto Soares; Espinosa, Denise Crocce Romano

2017-11-01

The advancement of technology and development of new electronic and electrical equipment with a reduced life cycle has increased the need for the disposal of them (called Waste of Electric and Electronic Equipment or simply e-waste) due to defects presented during use, replacement of obsolete equipment, and ease of acquisition of new equipment. There is a lack of consumer awareness regarding the use, handling storage, and disposal of this equipment. In Brazil, the disposal of post-consumer waste is regulated by the National Solid Waste Policy, established by Law No. 12305 and regulated on the 23rd December 2010. Under this legislation, manufacturers and importers are required to perform a project for the Reverse Logistics of e-waste, though its implementation is not well defined. This work focuses on the verification of the sustainability of reverse logistics suggested by the legislation and the mandatory points, evaluating its costs and the possible financial gain with recycling of the waste. The management of reverse logistics and recycling of waste electrical and electronic equipment, or simply recycling of e-waste, as suggested by the government, will be the responsibility of the managing organization to be formed by the manufacturers/importers in Brazil.

Disassembly factories for electrical and electronic products to recover resources in product and material cycles.

PubMed

Basdere, Bahadir; Seliger, Guenther

2003-12-01

Cycle economy as a paradigm for industry in the 21st century depends on the economical and ecological treatment of limited resources. The objective is to achieve more use with fewer resources to increase the use-productivity of these resources. The European Union, aware of the adverse environmental impacts associated with electrical and electronic consumer goods in particular, has passed legislation regulating their appropriate end-of-life treatment. Adaptation processes, including essential disassembly and re-assembly operations, contribute significantly toward the economical fulfillment of these new legal requirements. Typically, the disassembly of used products is characterized by a high rate of manual operations, wide variety of product types, and unknown product properties. To cope with such demands, life cycle units or product accompanying information systems, are being developed and used for acquiring data about a specific product throughout its life cycle to aid in determining the level of product deterioration. Modular disassembly processes and tools have been developed and realized to enable the handling of multiple productvariants. They are being implemented in prototypical hybrid disassembly systemsfor large- and small-size electrical and electronic consumer goods.

Dealing with consumer differences in liking during repeated exposure to food; typical dynamics in rating behavior.

PubMed

Dalenberg, Jelle R; Nanetti, Luca; Renken, Remco J; de Wijk, René A; Ter Horst, Gert J

2014-01-01

Consumers show high interindividual variability in food liking during repeated exposure. To investigate consumer liking during repeated exposure, data is often interpreted on a product level by averaging results over all consumers. However, a single product may elicit inconsistent behaviors in consumers; averaging will mix and hide possible subgroups of consumer behaviors, leading to a misinterpretation of the results. To deal with the variability in consumer liking, we propose to use clustering on data from consumer-product combinations to investigate the nature of the behavioral differences within the complete dataset. The resulting behavioral clusters can then be used to describe product acceptance. To test this approach we used two independent data sets in which young adults were repeatedly exposed to drinks and snacks, respectively. We found that five typical consumer behaviors existed in both datasets. These behaviors differed both in the average level of liking as well as its temporal dynamics. By investigating the distribution of a single product across typical consumer behaviors, we provide more precise insight in how consumers divide in subgroups based on their product liking (i.e. product modality). This work shows that taking into account and using interindividual differences can unveil information about product acceptance that would otherwise be ignored.

Dealing with Consumer Differences in Liking during Repeated Exposure to Food; Typical Dynamics in Rating Behavior

PubMed Central

Dalenberg, Jelle R.; Nanetti, Luca; Renken, Remco J.; de Wijk, René A.; ter Horst, Gert J.

2014-01-01

Consumers show high interindividual variability in food liking during repeated exposure. To investigate consumer liking during repeated exposure, data is often interpreted on a product level by averaging results over all consumers. However, a single product may elicit inconsistent behaviors in consumers; averaging will mix and hide possible subgroups of consumer behaviors, leading to a misinterpretation of the results. To deal with the variability in consumer liking, we propose to use clustering on data from consumer-product combinations to investigate the nature of the behavioral differences within the complete dataset. The resulting behavioral clusters can then be used to describe product acceptance. To test this approach we used two independent data sets in which young adults were repeatedly exposed to drinks and snacks, respectively. We found that five typical consumer behaviors existed in both datasets. These behaviors differed both in the average level of liking as well as its temporal dynamics. By investigating the distribution of a single product across typical consumer behaviors, we provide more precise insight in how consumers divide in subgroups based on their product liking (i.e. product modality). This work shows that taking into account and using interindividual differences can unveil information about product acceptance that would otherwise be ignored. PMID:24667832

PHOTOCROSSLINKED IMMOBILIZATION OF POLYELECTROLYTES FOR TEMPLATE ASSISTED ENZYMATIC POLYMERIZATION OF CONJUGATED POLYMERS

EPA Science Inventory

Growing demand in consumer electronics raises need for efficient, affordable, environmentally benign and biodegradable substitutes for current technologies. Printed circuit boards contain heavy metals such as antimony, silver, chromium, zinc, lead, tin and copper. According t...

Fool U.

ERIC Educational Resources Information Center

Finn, Chester E., Jr.

2002-01-01

Cautions that there are many potential problems related to higher education via the information superhighway, noting that while distance learning is a fast-growing and promising educational technology, consumers need to use common sense and be prepared to deal with new electronic scams and rip-offs. (SM)

Measuring and Modeling Surface Sorption Dynamics of OPFRs in Stainless Steel Empty Chambers

EPA Science Inventory

Organophosphorus flame retardants (OPFRs) are produced and used widely as alternative additives in building materials and consumer products such as spray polyurethane foam (SPF), polyvinyl chloride flooring, electrical and electronic products, furniture, textile coatings, and pla...

No Small Change: E-Commerce in Distance Education.

ERIC Educational Resources Information Center

Robinson, Evan T.

2002-01-01

Explains how electronic commerce (e-commerce) principles can be useful for distance education in higher education. Topics include business-to-business and business-to-consumer models; entering the marketplace; understanding the institution's capabilities; knowing the competition; and sound financial models. (LRW)

Privacy Perspectives for Online Searchers: Confidentiality with Confidence?

ERIC Educational Resources Information Center

Duberman, Josh; Beaudet, Michael

2000-01-01

Presents issues and questions involved in online privacy from the information professional's perspective. Topics include consumer concerns; query confidentiality; securing computers from intrusion; electronic mail; search engines; patents and intellectual property searches; government's role; Internet service providers; database mining; user…

Share of Energy Used by Appliances and Consumer Electronics Increases in U.S. Homes

EIA Publications

2011-01-01

Over the past three decades, the share of residential electricity used by appliances and electronics in U.S. homes has nearly doubled from 17% to 3% , growing from 1.77 quadrillion Btu (quads) to 3.25 quads. This rise has occurred while federal energy efficiency standards were enacted on every major appliance, overall household energy consumption actually decreased from 10.58 quads to 10.55 quads, and energy use per household fell 31%.

Correlated Raman micro-spectroscopy and scanning electron microscopy analyses of flame retardants in environmental samples: a micro-analytical tool for probing chemical composition, origin and spatial distribution.

PubMed

Ghosal, Sutapa; Wagner, Jeff

2013-07-07

We present correlated application of two micro-analytical techniques: scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS) and Raman micro-spectroscopy (RMS) for the non-invasive characterization and molecular identification of flame retardants (FRs) in environmental dusts and consumer products. The SEM/EDS-RMS technique offers correlated, morphological, molecular, spatial distribution and semi-quantitative elemental concentration information at the individual particle level with micrometer spatial resolution and minimal sample preparation. The presented methodology uses SEM/EDS analyses for rapid detection of particles containing FR specific elements as potential indicators of FR presence in a sample followed by correlated RMS analyses of the same particles for characterization of the FR sub-regions and surrounding matrices. The spatially resolved characterization enabled by this approach provides insights into the distributional heterogeneity as well as potential transfer and exposure mechanisms for FRs in the environment that is typically not available through traditional FR analysis. We have used this methodology to reveal a heterogeneous distribution of highly concentrated deca-BDE particles in environmental dust, sometimes in association with identifiable consumer materials. The observed coexistence of deca-BDE with consumer material in dust is strongly indicative of its release into the environment via weathering/abrasion of consumer products. Ingestion of such enriched FR particles in dust represents a potential for instantaneous exposure to high FR concentrations. Therefore, correlated SEM/RMS analysis offers a novel investigative tool for addressing an area of important environmental concern.

Dynamics of NAD-metabolism: everything but constant.

PubMed

Opitz, Christiane A; Heiland, Ines

2015-12-01

NAD, as well as its phosphorylated form, NADP, are best known as electron carriers and co-substrates of various redox reactions. As such they participate in approximately one quarter of all reactions listed in the reaction database KEGG. In metabolic pathway analysis, the total amount of NAD is usually assumed to be constant. That means that changes in the redox state might be considered, but concentration changes of the NAD moiety are usually neglected. However, a growing number of NAD-consuming reactions have been identified, showing that this assumption does not hold true in general. NAD-consuming reactions are common characteristics of NAD(+)-dependent signalling pathways and include mono- and poly-ADP-ribosylation of proteins, NAD(+)-dependent deacetylation by sirtuins and the formation of messenger molecules such as cyclic ADP-ribose (cADPR) and nicotinic acid (NA)-ADP (NAADP). NAD-consuming reactions are thus involved in major signalling and gene regulation pathways such as DNA-repair or regulation of enzymes central in metabolism. All known NAD(+)-dependent signalling processes include the release of nicotinamide (Nam). Thus cellular NAD pools need to be constantly replenished, mostly by recycling Nam to NAD(+). This process is, among others, regulated by the circadian clock, causing complex dynamic changes in NAD concentration. As disturbances in NAD homoeostasis are associated with a large number of diseases ranging from cancer to diabetes, it is important to better understand the dynamics of NAD metabolism to develop efficient pharmacological invention strategies to target this pathway. © 2015 Authors; published by Portland Press Limited.

Radial Head Subluxation Among Young Children in the United States Associated With Consumer Products and Recreational Activities.

PubMed

Welch, Rachel; Chounthirath, Thiphalak; Smith, Gary A

2017-07-01

This study investigated the epidemiology of children treated in US emergency departments for radial head subluxation (RHS) associated with consumer products and recreational activities using data from the National Electronic Injury Surveillance System. An estimated 430 766 (95% confidence interval: 341 194-520 339) children ≤5 years of age were treated for RHS in US emergency departments from 1990 to 2011. The mean patient age was 2.1 years, and 56.5% of patients were girls. The most common mechanism of injury was a fall (43.2%), followed by arm pull (39.4%). The annual rate of RHS increased significantly by 190.1% during the 22-year study period. This is the largest study of RHS to date and the first to use a nationally representative sample to investigate secular trends and mechanisms of injury for RHS associated with consumer products and recreational activities. Events associated with consumer products and recreational activities are an important increasing source of RHS.

Degradation of raw corn stover powder (RCSP) by an enriched microbial consortium and its community structure.

PubMed

Feng, Yujie; Yu, Yanling; Wang, Xin; Qu, Youpeng; Li, Dongmei; He, Weihua; Kim, Byung Hong

2011-01-01

A microbial consortium with a high cellulolytic activity was enriched to degrade raw corn stover powder (RCSP). This consortium degraded more than 51% of non-sterilized RCSP or 81% of non-sterilized filter paper within 8 days at 40°C under facultative anoxic conditions. Cellulosome-like structures were observed in scanning electron micrographs (SEM) of RCSP degradation residue. The high cellulolytic activity was maintained during 40 subcultures in a medium containing cellulosic substrate. Small ribosomal gene sequence analyses showed the consortium contains uncultured and cultured bacteria with or without cellulolytic activities. Among these bacteria, some are anaerobic others aerobic. Analyses of the culture filtrate showed a typical anoxic polysaccharide fermentation during the culturing process. Reducing sugar concentration increased at early stage followed by various fermentation products that were consumed at the late stage. Copyright © 2010 Elsevier Ltd. All rights reserved.

Growth of single crystals of BaFe12O19 by solid state crystal growth

NASA Astrophysics Data System (ADS)

Fisher, John G.; Sun, Hengyang; Kook, Young-Geun; Kim, Joon-Seong; Le, Phan Gia

2016-10-01

Single crystals of BaFe12O19 are grown for the first time by solid state crystal growth. Seed crystals of BaFe12O19 are buried in BaFe12O19+1 wt% BaCO3 powder, which are then pressed into pellets containing the seed crystals. During sintering, single crystals of BaFe12O19 up to ∼130 μm thick in the c-axis direction grow on the seed crystals by consuming grains from the surrounding polycrystalline matrix. Scanning electron microscopy-energy dispersive spectroscopy analysis shows that the single crystal and the surrounding polycrystalline matrix have the same chemical composition. Micro-Raman scattering shows the single crystal to have the BaFe12O19 structure. The optimum growth temperature is found to be 1200 °C. The single crystal growth behavior is explained using the mixed control theory of grain growth.

Life cycle assessment of mobile phone housing.

PubMed

Yang, Jian-xin; Wang, Ru-song; Fu, Hao; Liu, Jing-ru

2004-01-01

The life cycle assessment of the mobile phone housing in Motorola(China) Electronics Ltd. was carried out, in which materials flows and environmental emissions based on a basic production scheme were analyzed and assessed. In the manufacturing stage, such primary processes as polycarbonate molding and surface painting are included, whereas different surface finishing technologies like normal painting, electroplate, IMD and VDM etc. were assessed. The results showed that housing decoration plays a significant role within the housing life cycle. The most significant environmental impact from housing production is the photochemical ozone formation potential. Environmental impacts of different decoration techniques varied widely, for example, the electroplating technique is more environmentally friendly than VDM. VDM consumes much more energy and raw material. In addition, the results of two alternative scenarios of dematerialization showed that material flow analysis and assessment is very important and valuable in selecting an environmentally friendly process.