7 CFR 1710.112 - Loan feasibility.

Code of Federal Regulations, 2014 CFR

2014-01-01

... other energy sources to prevent substantial load loss while providing satisfactory service to its consumers. (4) Risks of possible loss of substantial loads from large consumers or from load concentrations in particular industries will not substantially impair loan feasibility. (5) Risks of loss of...

Development of guidelines to assist organisations to support employees returning to work after an episode of anxiety, depression or a related disorder: a Delphi consensus study with Australian professionals and consumers

PubMed Central

2012-01-01

Background Mental disorders are a significant cause of disability and loss of workplace productivity. The scientific evidence for how organisations should best support those returning to work after common mental disorders is relatively limited. Therefore a Delphi expert consensus study was carried out with professional and consumer experts. Methods A systematic review of websites, books and journal articles was conducted to develop a 387 item survey containing strategies that organisations might use to support those returning to work after common mental disorders. Three panels of Australian experts (66 health professionals, 30 employers and 80 consumers) were recruited and independently rated the items over three rounds, with strategies reaching consensus on importance written into the guidelines. Results The participation rate across all three rounds was 60.2% (57.6% health professionals, 76.7% employers, 56.3% consumers). 308 strategies were endorsed as essential or important by at least 80% of all three panels. The endorsed strategies provided information on policy and procedures, the roles of supervisors, employees and colleagues in managing absence and return to work, and provision of mental health information and training. Conclusions The guidelines outline strategies for organisations supporting those returning to work after common mental disorders. It is hoped that they may be used to inform policy and practice in a variety of workplaces. PMID:22943604

ENERGY SYSTEM DEVELOPMENT AND LOAD MANAGEMENT THROUGH THE REHABILITATION AND RETURN TO PLAY PROCESS.

PubMed

Morrison, Scot; Ward, Patrick; duManoir, Gregory R

2017-08-01

Return-to-play from injury is a complex process involving many factors including the balancing of tissue healing rates with the development of biomotor abilities. This process requires interprofessional cooperation to ensure success. An often-overlooked aspect of return-to-play is the development and maintenance of sports specific conditioning while monitoring training load to ensure that the athlete's training stimulus over the rehabilitation period is appropriate to facilitate a successful return to play. The purpose of this clinical commentary is to address the role of energy systems training as part of the return-to-play process. Additionally the aim is to provide practitioners with an overview of practical sports conditioning training methods and monitoring strategies to allow them to direct and quantify the return-to-play process. 5.

Nutrition labels in bar graph format deemed most useful for consumer purchase decisions using adaptive conjoint analysis.

PubMed

Geiger, C J; Wyse, B W; Parent, C R; Hansen, R G

1991-07-01

This study estimated the effects of changing multiple levels and combinations of nutrition information format, load, expression, and order on consumers' perceptions of label usefulness in purchase decisions using adaptive conjoint analysis. A shopping mall intercept survey, which was administered by a marketing research firm, assessed consumer preferences for 12 label alternatives produced on Campbell's soup cans to portray nutrition information realistically; 252 of 258 respondents completed the computer interactive interview. Consumers significantly preferred the bar graph format to the bar graph/nutrient density and traditional label formats. Consumers considered the bar graph/nutrient density format to be as useful as the traditional label format. There was a highly significant difference among the three levels of information load; the most information load was preferred regardless of nutrient importance. Consumers significantly preferred nutrition information stated in absolute numbers and percentages vs in absolute numbers only in traditional, or in percentages only expressions. There was a significant difference between consumer preferences for the two types of information order. The findings indicate that consumers clearly preferred the nutrition label that displayed all nutrient values using a bar graph format, offered the most information load, and expressed nutrient values using both absolute numbers and percentages. Consumers also preferred nutrition information rearranged in an order that grouped nutrients that should be consumed in adequate amounts on the top, calories in the middle, and nutrients that should be consumed in lesser amounts on the bottom of the label.

Optimizing Industrial Consumer Demand Response Through Disaggregation, Hour-Ahead Pricing, and Momentary Autonomous Control

NASA Astrophysics Data System (ADS)

Abdulaal, Ahmed

The work in this study addresses the current limitations of the price-driven demand response (DR) approach. Mainly, the dependability on consumers to respond in an energy aware conduct, the response timeliness, the difficulty of applying DR in a busy industrial environment, and the problem of load synchronization are of utmost concern. In order to conduct a simulation study, realistic price simulation model and consumers' building load models are created using real data. DR action is optimized using an autonomous control method, which eliminates the dependency on frequent consumer engagement. Since load scheduling and long-term planning approaches are infeasible in the industrial environment, the proposed method utilizes instantaneous DR in response to hour-ahead price signals (RTP-HA). Preliminary simulation results concluded savings at the consumer-side at the cost of increased supplier-side burden due to the aggregate effect of the universal DR policies. Therefore, a consumer disaggregation strategy is briefly discussed. Finally, a refined discrete-continuous control system is presented, which utilizes multi-objective Pareto optimization, evolutionary programming, utility functions, and bidirectional loads. Demonstrated through a virtual testbed fit with real data, the new system achieves momentary optimized DR in real-time while maximizing the consumer's wellbeing.

Photodiode Preamplifier for Laser Ranging With Weak Signals

NASA Technical Reports Server (NTRS)

Abramovici, Alexander; Chapsky, Jacob

2007-01-01

An improved preamplifier circuit has been designed for processing the output of an avalanche photodiode (APD) that is used in a high-resolution laser ranging system to detect laser pulses returning from a target. The improved circuit stands in contrast to prior such circuits in which the APD output current pulses are made to pass, variously, through wide-band or narrow-band load networks before preamplification. A major disadvantage of the prior wide-band load networks is that they are highly susceptible to noise, which degrades timing resolution. A major disadvantage of the prior narrow-band load networks is that they make it difficult to sample the amplitudes of the narrow laser pulses ordinarily used in ranging. In the improved circuit, a load resistor is connected to the APD output and its value is chosen so that the time constant defined by this resistance and the APD capacitance is large, relative to the duration of a laser pulse. The APD capacitance becomes initially charged by the pulse of current generated by a return laser pulse, so that the rise time of the load-network output is comparable to the duration of the return pulse. Thus, the load-network output is characterized by a fast-rising leading edge, which is necessary for accurate pulse timing. On the other hand, the resistance-capacitance combination constitutes a lowpass filter, which helps to suppress noise. The long time constant causes the load network output pulse to have a long shallow-sloping trailing edge, which makes it easy to sample the amplitude of the return pulse. The output of the load network is fed to a low-noise, wide-band amplifier. The amplifier must be a wide-band one in order to preserve the sharp pulse rise for timing. The suppression of noise and the use of a low-noise amplifier enable the ranging system to detect relatively weak return pulses.

An investigation of used electronics return flows: a data-driven approach to capture and predict consumers storage and utilization behavior.

PubMed

Sabbaghi, Mostafa; Esmaeilian, Behzad; Raihanian Mashhadi, Ardeshir; Behdad, Sara; Cade, Willie

2015-02-01

Consumers often have a tendency to store their used, old or un-functional electronics for a period of time before they discard them and return them back to the waste stream. This behavior increases the obsolescence rate of used still-functional products leading to lower profitability that could be resulted out of End-of-Use (EOU) treatments such as reuse, upgrade, and refurbishment. These types of behaviors are influenced by several product and consumer-related factors such as consumers' traits and lifestyles, technology evolution, product design features, product market value, and pro-environmental stimuli. Better understanding of different groups of consumers, their utilization and storage behavior and the connection of these behaviors with product design features helps Original Equipment Manufacturers (OEMs) and recycling and recovery industry to better overcome the challenges resulting from the undesirable storage of used products. This paper aims at providing insightful statistical analysis of Electronic Waste (e-waste) dynamic nature by studying the effects of design characteristics, brand and consumer type on the electronics usage time and end of use time-in-storage. A database consisting of 10,063 Hard Disk Drives (HDD) of used personal computers returned back to a remanufacturing facility located in Chicago, IL, USA during 2011-2013 has been selected as the base for this study. The results show that commercial consumers have stored computers more than household consumers regardless of brand and capacity factors. Moreover, a heterogeneous storage behavior is observed for different brands of HDDs regardless of capacity and consumer type factors. Finally, the storage behavior trends are projected for short-time forecasting and the storage times are precisely predicted by applying machine learning methods. Copyright © 2014 Elsevier Ltd. All rights reserved.

Logistics resupply and emergency crew return system for Space Station Freedom

NASA Technical Reports Server (NTRS)

Ahne, D.; Caldwell, D.; Davis, K.; Delmedico, S.; Heinen, E.; Ismail, S.; Sumner, C.; Bock, J.; Buente, B.; Gliane, R.

1989-01-01

Sometime in the late 1990's, if all goes according to plan, Space Station Freedom will allow the United States and its cooperating partners to maintain a permanent presence in space. Acting as a scientific base of operations, it will also serve as a way station for future explorations of the Moon and perhaps even Mars. Systems onboard the station will have longer lifetimes, higher reliability, and lower maintenance requirements than seen on any previous space flight vehicle. Accordingly, the station will have to be resupplied with consumables (air, water, food, etc.) and other equipment changeouts (experiments, etc.) on a periodic basis. Waste materials and other products will also be removed from the station for return to Earth. The availability of a Logistics Resupply Module (LRM), akin to the Soviet's Progress vehicle, would help to accomplish these tasks. Riding into orbit on an expendable launch vehicle, the LRM would be configured to rendezvous autonomously and dock with the space station. After the module is emptied of its cargo, waste material from the space station would be loaded back into it. The module would then begin its descent to a recovery point on Earth. Logistics Resupply Modules could be configured in a variety of forms depending on the type of cargo being transferred. If the LRM's were cycled to the space station in such a way that at least one vehicle remained parked at the station at all times, the modules could serve double duty as crew emergency return capsules. A pressurized LRM could then bring two or more crew-persons requiring immediate return (because of health problems, system failure, or unavoidable catastrophes) back to Earth. Large cost savings would be accrued by combining the crew return function with a logistics resupply system.

Identify Your Brand, Before You Market.

ERIC Educational Resources Information Center

Claggett, Laura

2002-01-01

Discusses marketing in special libraries and suggests that librarians need to identify library services that set them apart from others. Highlights include the competitive environment and alternatives for the consumer; value that the library offers; targeting consumers; return on investment; and determining why consumers choose your services. (LRW)

Crop load and harvest maturity effects on consumer preferences for apricots.

PubMed

Stanley, Jill; Feng, Jinquan; Olsson, Shane

2015-03-15

Improving apricot fruit quality delivered to consumers is key to ensuring a successful apricot industry. Previous studies have focused on effects of either soluble solids content (SSC) or fruit firmness on consumer preferences, and results have been equivocal. This study evaluated the effects of crop load and harvest maturity how they affected on fruit SSC and firmness, and on subsequent consumer preferences. SSC of apricots was an important factor only when fruit were firmer than 15 N and not immature. When fruit were softer than 15 N, SSC had little influence on consumer liking. In general, consumers preferred fruit that were grown on trees thinned to approximately 10-20% less than typical commercial crop loads and were harvested in a more mature condition. Consumers also preferred fruit that had a higher sugar/acid ratio or BrimA value, which is the °Brix - k × titratable acidity, where k is a constant that varies between species and cultivars depending on the specific acids and sugars present. High apricot flavour and juiciness were associated with greater sweetness. Management practices that increase fruit SSC and sugar/acid ratio, such as reducing crop load, will improve consumer satisfaction as long as fruit are harvested at an adequate maturity stage and are maintained in storage so that they do not soften too quickly. © 2014 Society of Chemical Industry.

The Impact of Consumer Credentialism on Employee and Entrepreneur Returns to Higher Education.

ERIC Educational Resources Information Center

Tucker, Irvin B., III

1987-01-01

Examines the relative importance of education credentials in consumer perceptions of self-employed business people. Using 1980 national cross-sectional data on goods- and service-producing occupations, the regression analysis shows that highly educated entrepreneurs are not influenced by consumer credentialism. Includes 17 references. (MLH)

12 CFR Supplement I to Part 205 - Official Staff Interpretations

Code of Federal Regulations, 2011 CFR

2011-01-01

... about when funds may be debited from a consumer's account and the non-return of consumer checks by the... certain events. ii. Debits to consumer accounts for group insurance available only through the financial.... Making an additional account accessible through an existing access device is equivalent to issuing an...

Electronic waste recovery in Finland: Consumers' perceptions towards recycling and re-use of mobile phones.

PubMed

Ylä-Mella, Jenni; Keiski, Riitta L; Pongrácz, Eva

2015-11-01

This paper examines consumers' awareness and perceptions towards mobile phone recycling and re-use. The results are based on a survey conducted in the city of Oulu, Finland, and analysed in the theoretical framework based on the theories of planned behaviour (TPB) and value-belief-norm (VBN). The findings indicate that consumers' awareness of the importance and existence of waste recovery system is high; however, awareness has not translated to recycling behaviour. The survey reveals that 55% of respondents have two or more unused mobile phones at homes. The more phones stored at homes, the more often reasons 'I don't know where to return' and/or 'have not got to do it yet' were mentioned. This indicates that proximity and the convenience of current waste management system are inadequate in promoting the return of small waste electrical and electronic equipment (WEEE). To facilitate re-use, and the highest level of recovery, consumers will need to be committed to return end-of-use electronics to WEEE collection centres without delays. Further, the supply and demand of refurbished mobile phones do not meet at this moment in Finland due to consumer's storing habits versus expectations of recent features under guarantee and unrealistic low prizes. The study also points out that, in order to change current storing habits of consumers, there is an explicit need for more information and awareness on mobile phone collection in Finland, especially on regarding retailers' take-back. Copyright © 2015 Elsevier Ltd. All rights reserved.

Energy Return on Investment (EROI) for Forty Global Oilfields Using a Detailed Engineering-Based Model of Oil Production.

PubMed

Brandt, Adam R; Sun, Yuchi; Bharadwaj, Sharad; Livingston, David; Tan, Eugene; Gordon, Deborah

2015-01-01

Studies of the energy return on investment (EROI) for oil production generally rely on aggregated statistics for large regions or countries. In order to better understand the drivers of the energy productivity of oil production, we use a novel approach that applies a detailed field-level engineering model of oil and gas production to estimate energy requirements of drilling, producing, processing, and transporting crude oil. We examine 40 global oilfields, utilizing detailed data for each field from hundreds of technical and scientific data sources. Resulting net energy return (NER) ratios for studied oil fields range from ≈2 to ≈100 MJ crude oil produced per MJ of total fuels consumed. External energy return (EER) ratios, which compare energy produced to energy consumed from external sources, exceed 1000:1 for fields that are largely self-sufficient. The lowest energy returns are found to come from thermally-enhanced oil recovery technologies. Results are generally insensitive to reasonable ranges of assumptions explored in sensitivity analysis. Fields with very large associated gas production are sensitive to assumptions about surface fluids processing due to the shifts in energy consumed under different gas treatment configurations. This model does not currently include energy invested in building oilfield capital equipment (e.g., drilling rigs), nor does it include other indirect energy uses such as labor or services.

Energy Return on Investment (EROI) for Forty Global Oilfields Using a Detailed Engineering-Based Model of Oil Production

PubMed Central

Brandt, Adam R.; Sun, Yuchi; Bharadwaj, Sharad; Livingston, David; Tan, Eugene; Gordon, Deborah

2015-01-01

Studies of the energy return on investment (EROI) for oil production generally rely on aggregated statistics for large regions or countries. In order to better understand the drivers of the energy productivity of oil production, we use a novel approach that applies a detailed field-level engineering model of oil and gas production to estimate energy requirements of drilling, producing, processing, and transporting crude oil. We examine 40 global oilfields, utilizing detailed data for each field from hundreds of technical and scientific data sources. Resulting net energy return (NER) ratios for studied oil fields range from ≈2 to ≈100 MJ crude oil produced per MJ of total fuels consumed. External energy return (EER) ratios, which compare energy produced to energy consumed from external sources, exceed 1000:1 for fields that are largely self-sufficient. The lowest energy returns are found to come from thermally-enhanced oil recovery technologies. Results are generally insensitive to reasonable ranges of assumptions explored in sensitivity analysis. Fields with very large associated gas production are sensitive to assumptions about surface fluids processing due to the shifts in energy consumed under different gas treatment configurations. This model does not currently include energy invested in building oilfield capital equipment (e.g., drilling rigs), nor does it include other indirect energy uses such as labor or services. PMID:26695068

Has the athlete trained enough to return to play safely? The acute:chronic workload ratio permits clinicians to quantify a player's risk of subsequent injury.

PubMed

Blanch, Peter; Gabbett, Tim J

2016-04-01

The return to sport from injury is a difficult multifactorial decision, and risk of reinjury is an important component. Most protocols for ascertaining the return to play status involve assessment of the healing status of the original injury and functional tests which have little proven predictive ability. Little attention has been paid to ascertaining whether an athlete has completed sufficient training to be prepared for competition. Recently, we have completed a series of studies in cricket, rugby league and Australian rules football that have shown that when an athlete's training and playing load for a given week (acute load) spikes above what they have been doing on average over the past 4 weeks (chronic load), they are more likely to be injured. This spike in the acute:chronic workload ratio may be from an unusual week or an ebbing of the athlete's training load over a period of time as in recuperation from injury. Our findings demonstrate a strong predictive (R(2)=0.53) polynomial relationship between acute:chronic workload ratio and injury likelihood. In the elite team setting, it is possible to quantify the loads we are expecting athletes to endure when returning to sport, so assessment of the acute:chronic workload ratio should be included in the return to play decision-making process. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Risk-Informed Mean Recurrence Intervals for Updated Wind Maps in ASCE 7-16.

PubMed

McAllister, Therese P; Wang, Naiyu; Ellingwood, Bruce R

2018-05-01

ASCE 7 is moving toward adopting load requirements that are consistent with risk-informed design goals characteristic of performance-based engineering (PBE). ASCE 7-10 provided wind maps that correspond to return periods of 300, 700, and 1,700 years for Risk Categories I, II, and combined III/IV, respectively. The risk targets for Risk Categories III and IV buildings and other structures (designated as essential facilities) are different in PBE. The reliability analyses reported in this paper were conducted using updated wind load data to (1) confirm that the return periods already in ASCE 7-10 were also appropriate for risk-informed PBE, and (2) to determine a new risk-based return period for Risk Category IV. The use of data for wind directionality factor, K d , which has become available from recent wind tunnel tests, revealed that reliabilities associated with wind load combinations for Risk Category II structures are, in fact, consistent with the reliabilities associated with the ASCE 7 gravity load combinations. This paper shows that the new wind maps in ASCE 7-16, which are based on return periods of 300, 700, 1,700, and 3,000 years for Risk Categories I, II, III, and IV, respectively), achieve the reliability targets in Section 1.3.1.3 of ASCE 7-16 for nonhurricane wind loads.

Mathematical Approach to Identification of Load Structure at the Nodes of the Distribution Grids 6-10 kV and 0.4 kV

NASA Astrophysics Data System (ADS)

Nizamutdinova, T.; Mukhlynin, N.

2017-06-01

A significant increasing energy efficiency of the full cycle of production, transmission and distribution of electricity in grids should be based on the management of separate consumers of electricity. The existing energy supply systems based on the concept of «smart things» do not allow to identify the technical structure of the electricity consumption in the load nodes from the grid side. It makes solving the tasks of energy efficiency more difficult. To solve this problem, the use of Wavelet transform to create a mathematical tool for monitoring the load composition in the nodes of the distribution grids of 6-10 kV, 0.4 kV is proposed in this paper. The authors have created a unique wavelet based functions for some consumers, based on their current consumption graphs of these power consumers. Possibility of determination of the characteristics of individual consumers of electricity in total nodal charts of load is shown in the test case. In future, creation of a unified technical and informational model of load control will allow to solve the problem of increasing the economic efficiency of not only certain consumers, but also the entire power supply system as a whole.

Allocation of Load-Loss Cost Caused by Voltage Sag

NASA Astrophysics Data System (ADS)

Gao, X.

2017-10-01

This paper focuses on the allocation of load-loss cost caused by voltage sag in the environment of electricity market. To compensate the loss of loads due to voltage sags, the load-loss cost is allocated to both sources and power consumers. On the basis of Load Drop Cost (LDC), a quantitative evaluation index of load-loss cost caused by voltage sag is identified. The load-loss cost to be allocated to power consumers themselves is calculated according to load classification. Based on the theory of power component the quantitative relation between sources and loads is established, thereby a quantitative calculation method for load-loss cost allocated to each source is deduced and the quantitative compensation from individual source to load is proposed. A simple five-bus system illustrates the main features of the proposed method.

Water withdrawals, wastewater discharge, and water consumption in the Apalachicola-Chattahoochee-Flint River Basin, 2005, and water-use trends, 1970-2005

USGS Publications Warehouse

Marella, Richard L.; Fanning, Julia L.

2011-01-01

In 2000, an estimated 49 percent of the water withdrawn for public supply in the basin was consumed, and the remaining 51 percent was returned to the hydrologic system through wastewater treatment systems. In 2005, an estimated 38 percent was consumed and 62 percent was returned to the hydrologic system. This contrast between water withdrawals and wastewater discharges for these years was caused primarily by below-average rainfall during 2000 (a dry year) and above-average rainfall during 2005 (a wet year).

Distribution Free Approach for Coordination of a Supply Chain with Consumer Return

NASA Astrophysics Data System (ADS)

Hu, Jinsong; Xu, Yuanji

Consumer return is considered in a coordination of a supply chain consisting of one manufacturer and one retailer. A distribution free approach is employed to deal with a centralized decision model and a decentralized model which are constructed under the situation with only knowing the demand function's mean and variance, respectively. A markdown money contract is designed to coordinate the supply chain, and it is also proved that the contract can make the supply chain perfectly coordinated. Several numerical examples are given at the end of this paper.

The enteroinsular axis and endocrine pancreatic function in chronic alcohol consumers: evidence for early beta-cell hypofunction.

PubMed

Patto, R J; Russo, E K; Borges, D R; Neves, M M

1993-09-01

Chronic alcohol consumers may have, as judged by functional criteria, exocrine as well as endocrine pancreatic dysfunction, the latter represented by a decreased insulin response to an oral glucose load. To investigate whether this decreased insulin response was due to an ethanol-induced beta-cell dysfunction or to an ethanol-induced dysfunction of the enteroinsular axis, we determined glucose, insulin, and C-peptide plasma concentrations following an oral and an intravenous glucose load in 16 healthy volunteer nonalcohol consumers and in 10 chronic alcohol consumers. In each group, total integrated response for glucose did not significantly change whether glucose was given orally or intravenously, indicating isoglycemic glucose loads. The total integrated response values for insulin in the alcoholic group following both glucose loads as well as C-peptide plasma concentrations were significantly lower than in the control group. Moreover, in both groups the insulin TIR values following the oral glucose load were significantly greater than the values obtained following the intravenous glucose load, indicating an incretin effect. These results indicate that the decreased insulin response observed in alcoholics was not caused by a dysfunction of the enteroinsular axis because it also occurred following an intravenous glucose load, but by an ethanol-induced beta-cell dysfunction because C-peptide and insulin were proportionally decreased in this group.

Exponential increase in postprandial blood-glucose exposure with increasing carbohydrate loads using a linear carbohydrate-to-insulin ratio.

PubMed

Marran, K J; Davey, B; Lang, A; Segal, D G

2013-04-10

Postprandial glucose excursions contribute significantly to average blood glucose, glycaemic variability and cardiovascular risk. Carbohydrate counting is a method of insulin dosing that balances carbohydrate load to insulin dose using a fixed ratio. Many patients and current insulin pumps calculate insulin delivery for meals based on a linear carbohydrate-to-insulin relationship. It is our hypothesis that a non-linear relationship exists between the amounts of carbohydrate consumed and the insulin required to cover it. To document blood glucose exposure in response to increasing carbohydrate loads on fixed carbohydrate-to-insulin ratios. Five type 1 diabetic subjects receiving insulin pump therapy with good control were recruited. Morning basal rates and carbohydrate- to-insulin ratios were optimised. A Medtronic glucose sensor was used for 5 days to collect data for area-under-the-curve (AUC) analysis, during which standardised meals of increasing carbohydrate loads were consumed. Increasing carbohydrate loads using a fixed carbohydrate-to-insulin ratio resulted in increasing glucose AUC. The relationship was found to be exponential rather than linear. Late postprandial hypoglycaemia followed carbohydrate loads of >60 g and this was often followed by rebound hyperglycaemia that lasted >6 hours. A non-linear relationship exists between carbohydrates consumed and the insulin required to cover them. This has implications for control of postprandial blood sugars, especially when consuming large carbohydrate loads. Further studies are required to look at the optimal ratios, duration and type of insulin boluses required to cover increasing carbohydrate loads.

Cognitive load, stress, and disinhibited eating.

PubMed

Lattimore, Paul; Maxwell, Linda

2004-11-01

The impact of cognitive distraction on eating behaviour was examined in restrained and unrestrained eaters. It was predicted that restrained eaters would eat more than unrestrained eaters following high cognitive load when it involves processing of ego-threat information independent of self-reported anxiety. There were 119 female participants randomly allocated to one of four experimental conditions whereby cognitive load and ego threat were manipulated using modified colour-naming Stroop (CNS) tasks. Anxiety ratings were made prior to and following experimental tasks. After performing Stroop tasks, participants consumed snack foods ad libitum. Restrained eaters consumed significantly more food when high cognitive load was ego threatening than when it involved processing and memorisation of colour nouns and consumed significantly more than unrestrained eaters in a high cognitive load ego-threat condition. Posttask anxiety was greater than baseline across all conditions. Task difficulty was greater under high cognitive load than low cognitive load as indicated by Stroop response times. These results indicated that the escape theory of disinhibited eating is conceptually subsumed by a more generalisable limited cognitive capacity model.

River water quality management considering agricultural return flows: application of a nonlinear two-stage stochastic fuzzy programming.

PubMed

Tavakoli, Ali; Nikoo, Mohammad Reza; Kerachian, Reza; Soltani, Maryam

2015-04-01

In this paper, a new fuzzy methodology is developed to optimize water and waste load allocation (WWLA) in rivers under uncertainty. An interactive two-stage stochastic fuzzy programming (ITSFP) method is utilized to handle parameter uncertainties, which are expressed as fuzzy boundary intervals. An iterative linear programming (ILP) is also used for solving the nonlinear optimization model. To accurately consider the impacts of the water and waste load allocation strategies on the river water quality, a calibrated QUAL2Kw model is linked with the WWLA optimization model. The soil, water, atmosphere, and plant (SWAP) simulation model is utilized to determine the quantity and quality of each agricultural return flow. To control pollution loads of agricultural networks, it is assumed that a part of each agricultural return flow can be diverted to an evaporation pond and also another part of it can be stored in a detention pond. In detention ponds, contaminated water is exposed to solar radiation for disinfecting pathogens. Results of applying the proposed methodology to the Dez River system in the southwestern region of Iran illustrate its effectiveness and applicability for water and waste load allocation in rivers. In the planning phase, this methodology can be used for estimating the capacities of return flow diversion system and evaporation and detention ponds.

New consumer load prototype for electricity theft monitoring

NASA Astrophysics Data System (ADS)

Abdullateef, A. I.; Salami, M. J. E.; Musse, M. A.; Onasanya, M. A.; Alebiosu, M. I.

2013-12-01

Illegal connection which is direct connection to the distribution feeder and tampering of energy meter has been identified as a major process through which nefarious consumers steal electricity on low voltage distribution system. This has contributed enormously to the revenue losses incurred by the power and energy providers. A Consumer Load Prototype (CLP) is constructed and proposed in this study in order to understand the best possible pattern through which the stealing process is effected in real life power consumption. The construction of consumer load prototype will facilitate real time simulation and data collection for the monitoring and detection of electricity theft on low voltage distribution system. The prototype involves electrical design and construction of consumer loads with application of various standard regulations from Institution of Engineering and Technology (IET), formerly known as Institution of Electrical Engineers (IEE). LABVIEW platform was used for data acquisition and the data shows a good representation of the connected loads. The prototype will assist researchers and power utilities, currently facing challenges in getting real time data for the study and monitoring of electricity theft. The simulation of electricity theft in real time is one of the contributions of this prototype. Similarly, the power and energy community including students will appreciate the practical approach which the prototype provides for real time information rather than software simulation which has hitherto been used in the study of electricity theft.

Biochemical Effects on the Liver of 1 Month of Alcohol Abstinence in Moderate Alcohol Consumers.

PubMed

Munsterman, I D; Groefsema, M M; Weijers, G; Klein, W M; Swinkels, D W; Drenth, J P H; Schellekens, A F A; Tjwa, E T T L

2018-05-03

In this study in healthy moderate alcohol consumers, we observe that one month of alcohol abstinence results in decreased gamma-glutamyl transferase levels, which return to baseline levels after resumption of alcohol consumption.

Nutrient loading and consumers: Agents of change in open-coast macrophyte assemblages

PubMed Central

Nielsen, Karina J.

2003-01-01

Human activities are significantly altering nutrient regimes and the abundance of consumers in coastal ecosystems. A field experiment in an open-coast, upwelling ecosystem showed that small increases in nutrients increased the biomass and evenness of tide pool macrophytes where consumer abundance and nutrient loading rates were low. Consumers, when abundant, had negative effects on the diversity and biomass of macrophytes. Nutrient loading increases and consumers are less abundant and efficient as wave exposure increases along open coastlines. Experimentally reversing the natural state of nutrient supply and consumer pressure at a wave-protected site to match wave-exposed sites caused the structure of the macrophyte assemblage to converge on that found naturally in wave-exposed pools. The increases in evenness and abundance were driven by increases in structurally complex functional groups. In contrast, increased nutrient loading in semienclosed marine or estuarine ecosystems is typically associated with declines in macrophyte diversity because of increases in structurally simple and opportunistic functional groups. If nutrient concentration of upwelled waters changes with climatic warming or increasing frequency of El Niños, as predicted by some climate models, these results suggest that macrophyte abundance and evenness along wave-swept open-coasts will also change. Macrophytes represent a significant fraction of continental shelf production and provide important habitat for many marine species. The combined effects of shifting nutrient regimes and overexploitation of consumers may have unexpected consequences for the structure and functioning of open-coast communities. PMID:12796509

Nutrient loading and consumers: agents of change in open-coast macrophyte assemblages.

PubMed

Nielsen, Karina J

2003-06-24

Human activities are significantly altering nutrient regimes and the abundance of consumers in coastal ecosystems. A field experiment in an open-coast, upwelling ecosystem showed that small increases in nutrients increased the biomass and evenness of tide pool macrophytes where consumer abundance and nutrient loading rates were low. Consumers, when abundant, had negative effects on the diversity and biomass of macrophytes. Nutrient loading increases and consumers are less abundant and efficient as wave exposure increases along open coastlines. Experimentally reversing the natural state of nutrient supply and consumer pressure at a wave-protected site to match wave-exposed sites caused the structure of the macrophyte assemblage to converge on that found naturally in wave-exposed pools. The increases in evenness and abundance were driven by increases in structurally complex functional groups. In contrast, increased nutrient loading in semienclosed marine or estuarine ecosystems is typically associated with declines in macrophyte diversity because of increases in structurally simple and opportunistic functional groups. If nutrient concentration of upwelled waters changes with climatic warming or increasing frequency of El Niños, as predicted by some climate models, these results suggest that macrophyte abundance and evenness along wave-swept open-coasts will also change. Macrophytes represent a significant fraction of continental shelf production and provide important habitat for many marine species. The combined effects of shifting nutrient regimes and overexploitation of consumers may have unexpected consequences for the structure and functioning of open-coast communities.

Integral low-energy thermite igniter

DOEpatents

Gibson, A.; Haws, L.D.; Mohler, J.H.

1983-05-13

In a thermite igniter/heat source comprising a container holding an internal igniter load, there is provided the improvement wherein the container consists essentially of consumable consolidated thermite having a low gas output upon combustion, whereby upon ignition, substantially all of the container and said load is consumed with low gas production.

Integral low-energy thermite igniter

DOEpatents

Gibson, Albert; Haws, Lowell D.; Mohler, Jonathan H.

1984-08-14

In a thermite igniter/heat source comprising a container holding an internal igniter load, there is provided the improvement wherein the container consists essentially of consumable consolidated thermite having a low gas output upon combustion, whereby upon ignition, substantially all of the container and said load is consumed with low gas production.

Online Searching: An Analysis of Marketing Issues.

ERIC Educational Resources Information Center

Dunn, Ronald G.; Boyle, Harry F.

1984-01-01

This essay addresses factors that influence a customer's perception of the value of online information delivery services: evident costs, uncertain return, long-term return, not directly productive, overhead expense, and differential use. Roles assumed in acquiring and using information services (purchasers, searchers, consumers), price, and…

An interval kicking progression for return to soccer following lower extremity injury.

PubMed

Arundale, Amelia; Silvers, Holly; Logerstedt, David; Rojas, Jaime; Snyder-Mackler, Lynn

2015-02-01

The majority of all soccer injuries affect the lower extremities. Regardless of whether the injured limb is an athlete's preferred kicking or stance leg, a lower extremity injury may affect their ability to impact the ball. Sport-specific biomechanical progressions to augment loading and gradually reintroduce a player to the demands of sport have been developed for upper extremity sports such as baseball, softball, tennis, and golf. Generalized return to soccer progressions have also been published in order to assist clinicians in safely returning athletes to sport; however, there are no specific progressions for the early stages of kicking designed to introduce stance leg loading and kicking leg impact. Thus, the purpose of this clinical commentary was to review the existing literature elucidating the biomechanics of kicking a soccer ball and propose a progressive kicking program to support clinicians in safely returning their soccer athletes to the demands of sport. The interval kicking program (IKP) describes clinical guidelines for readiness to begin a kicking program as well as possible readiness to return to sport measures. The program is performed on alternate days integrating therapeutic exercise and cardiovascular fitness. The IKP gradually introduces a player to the loading and impact of kicking. The progression increases kicking distance (using the markings of a soccer field as a guide), volume, and intensity and uses proposed soreness rules, effusion guidelines, and player feedback in order to assist clinicians in determining readiness for advancement though the stages. The IKP also recommends utility of specific tests and measures to determine readiness for return to sport. Gradual reintroduction to sport specific demands is essential for a safe return to soccer. This return to sport progression provides a framework integrating injury specific therapeutic exercise, cardiovascular fitness, and the return to kicking progression, to assist clinicians in initiating an athletes' return to soccer. Level 5.

Applying Aerodynamics Inspired Organizational Dynamic Fit Model Disaster Relief Endeavors

DTIC Science & Technology

2010-12-01

gusts, and a dynamically stable organization returns quickly to its intended profit level, for instance, after deviation by changed consumer preferences . Hence...dynamic stability limits the level, for instance, by changed consumer preferences . Hence static stability limits initial performance... consumer preferences Maneuverability Quickness of a controlled system’s planned change from one trajectory to another Quickness of planned

Rivermouth alteration of agricultural impacts on consumer tissue δ15N

USGS Publications Warehouse

Larson, James H.; Richardson, William B.; Vallazza, Jonathan M.; Nelson, J. C.

2013-01-01

Terrestrial agricultural activities strongly influence riverine nitrogen (N) dynamics, which is reflected in the δ15N of riverine consumer tissues. However, processes within aquatic ecosystems also influence consumer tissue δ15N. As aquatic processes become more important terrestrial inputs may become a weaker predictor of consumer tissue δ15N. In a previous study, this terrestrial-consumer tissue δ15N connection was very strong at river sites, but was disrupted by processes occurring in rivermouths (the ‘rivermouth effect’). This suggested that watershed indicators of N loading might be accurate in riverine settings, but could be inaccurate when considering N loading to the nearshore of large lakes and oceans. In this study, the rivermouth effect was examined on twenty-five sites spread across the Laurentian Great Lakes. Relationships between agriculture and consumer tissue δ15N occurred in both upstream rivers and at the outlets where rivermouths connect to the nearshore zone, but agriculture explained less variation and had a weaker effect at the outlet. These results suggest that rivermouths may sometimes be significant sources or sinks of N, which would cause N loading estimates to the nearshore zone that are typically made at discharge gages further upstream to be inaccurate. Identifying definitively the controls over the rivermouth effect on N loading (and other nutrients) will require integration of biogeochemical and hydrologic models.

Developing a methodology for real-time trading of water withdrawal and waste load discharge permits in rivers.

PubMed

Soltani, Maryam; Kerachian, Reza

2018-04-15

In this paper, a new methodology is proposed for the real-time trading of water withdrawal and waste load discharge permits in agricultural areas along the rivers. Total Dissolved Solids (TDS) is chosen as an indicator of river water quality and the TDS load that agricultural water users discharge to the river are controlled by storing a part of return flows in some evaporation ponds. Available surface water withdrawal and waste load discharge permits are determined using a non-linear multi-objective optimization model. Total available permits are then fairly reallocated among agricultural water users, proportional to their arable lands. Water users can trade their water withdrawal and waste load discharge permits simultaneously, in a bilateral, step by step framework, which takes advantage of differences in their water use efficiencies and agricultural return flow rates. A trade that would take place at each time step results in either more benefit or less diverted return flow. The Nucleolus cooperative game is used to redistribute the benefits generated through trades in different time steps. The proposed methodology is applied to PayePol region in the Karkheh River catchment, southwest Iran. Predicting that 1922.7 Million Cubic Meters (MCM) of annual flow is available to agricultural lands at the beginning of the cultivation year, the real-time optimization model estimates the total annual benefit to reach 46.07 million US Dollars (USD), which requires 6.31 MCM of return flow to be diverted to the evaporation ponds. Fair reallocation of the permits, changes these values to 35.38 million USD and 13.69 MCM, respectively. Results illustrate the effectiveness of the proposed methodology in the real-time water and waste load allocation and simultaneous trading of permits. Copyright © 2018 Elsevier Ltd. All rights reserved.

A Kind of Optimization Method of Loading Documents in OpenOffice.org

NASA Astrophysics Data System (ADS)

Lan, Yuqing; Li, Li; Zhou, Wenbin

As a giant in open source community, OpenOffice.org has become the most popular office suite within Linux community. But OpenOffice.org is relatively slow while loading documents. Research shows that the most time consuming part is importing one page of whole document. If there are many pages in a document, the accumulation of time consumed can be astonishing. Therefore, this paper proposes a solution, which has improved the speed of loading documents through asynchronous importing mechanism: a document is not imported as a whole, but only part of the document is imported at first for display, then mechanism in the background is started to asynchronously import the remaining parts, and insert it into the drawing queue of OpenOffice.org for display. In this way, the problem can be solved and users don't have to wait for a long time. Application start-up time testing tool has been used to test the time consumed in loading different pages of documents before and after optimization of OpenOffice.org, then, we adopt the regression theory to analyse the correlation between the page number of documents and the loading time. In addition, visual modeling of the experimental data are acquired with the aid of matlab. An obvious increase in loading speed can be seen after a comparison of the time consumed to load a document before and after the solution is adopted. And then, using Microsoft Office compared with the optimized OpenOffice.org, their loading speeds are almost same. The results of the experiments show the effectiveness of this solution.

Simulation of short-term electric load using an artificial neural network

NASA Astrophysics Data System (ADS)

Ivanin, O. A.

2018-01-01

While solving the task of optimizing operation modes and equipment composition of small energy complexes or other tasks connected with energy planning, it is necessary to have data on energy loads of a consumer. Usually, there is a problem with obtaining real load charts and detailed information about the consumer, because a method of load-charts simulation on the basis of minimal information should be developed. The analysis of work devoted to short-term loads prediction allows choosing artificial neural networks as a most suitable mathematical instrument for solving this problem. The article provides an overview of applied short-term load simulation methods; it describes the advantages of artificial neural networks and offers a neural network structure for electric loads of residential buildings simulation. The results of modeling loads with proposed method and the estimation of its error are presented.

Operational and Medical Procedures for a Declared Contingency Shuttle (CSCS) Shuttle Mission Due to a Failure that Precludes a Safe Return

NASA Technical Reports Server (NTRS)

Adams, Adrien; Patlach, Bob; Duchense, Ted; Chandler, Mike; Stepaniak, Philip C.

2011-01-01

This poster paper outlines the operational and medical procedures for a shuttle mission that has a failure that precludes a safe return to Earth. Information about the assumptions, procedures and limiting consumables is included.

Altair Lunar Lander Consumables Management

NASA Technical Reports Server (NTRS)

Polsgrove, Tara; Button, Robert; Linne, Diane

2009-01-01

The Altair lunar lander is scheduled to return humans to the moon in the year 2020. Keeping the crew of 4 and the vehicle functioning at their best while minimizing lander mass requires careful budgeting and management of consumables and cooperation with other constellation elements. Consumables discussed here include fluids, gasses, and energy. This paper presents the lander's missions and constraints as they relate to consumables and the design solutions that have been employed in recent Altair conceptual designs.

Estimating returns to scale and scale efficiency for energy consuming appliances

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blum, Helcio; Okwelum, Edson O.

Energy consuming appliances accounted for over 40% of the energy use and $17 billion in sales in the U.S. in 2014. Whether such amounts of money and energy were optimally combined to produce household energy services is not straightforwardly determined. The efficient allocation of capital and energy to provide an energy service has been previously approached, and solved with Data Envelopment Analysis (DEA) under constant returns to scale. That approach, however, lacks the scale dimension of the problem and may restrict the economic efficient models of an appliance available in the market when constant returns to scale does not hold.more » We expand on that approach to estimate returns to scale for energy using appliances. We further calculate DEA scale efficiency scores for the technically efficient models that comprise the economic efficient frontier of the energy service delivered, under different assumptions of returns to scale. We then apply this approach to evaluate dishwashers available in the market in the U.S. Our results show that (a) for the case of dishwashers scale matters, and (b) the dishwashing energy service is delivered under non-decreasing returns to scale. The results further demonstrate that this method contributes to increase consumers’ choice of appliances.« less

Voltage Based Detection Method for High Impedance Fault in a Distribution System

NASA Astrophysics Data System (ADS)

Thomas, Mini Shaji; Bhaskar, Namrata; Prakash, Anupama

2016-09-01

High-impedance faults (HIFs) on distribution feeders cannot be detected by conventional protection schemes, as HIFs are characterized by their low fault current level and waveform distortion due to the nonlinearity of the ground return path. This paper proposes a method to identify the HIFs in distribution system and isolate the faulty section, to reduce downtime. This method is based on voltage measurements along the distribution feeder and utilizes the sequence components of the voltages. Three models of high impedance faults have been considered and source side and load side breaking of the conductor have been studied in this work to capture a wide range of scenarios. The effect of neutral grounding of the source side transformer is also accounted in this study. The results show that the algorithm detects the HIFs accurately and rapidly. Thus, the faulty section can be isolated and service can be restored to the rest of the consumers.

Fish oil feeding delays influenza virus clearance and impairs production of interferon-gamma and virus-specific immunoglobulin A in the lungs of mice.

PubMed

Byleveld, P M; Pang, G T; Clancy, R L; Roberts, D C

1999-02-01

Ingestion of fish oil can suppress the inflammatory response to injury and may impair host resistance to infection. To investigate the effect of a diet containing fish oil on immunity to viral infection, 148 BALB/c mice were fed diets containing 3 g/100 g of sunflower oil with either 17 g/100 g of fish oil or beef tallow for 14 d before intranasal challenge with live influenza virus. At d 1 and d 5 after infection, the mice fed fish oil had higher lung viral load and lower body weight (P < 0.05). In addition to the greater viral load and weight loss at d 5 after infection, the fish oil group consumed less food (P < 0.05) while the beef tallow group was clearing the virus, had regained their preinfection weights and was returning to their preinfection food consumption. The fish oil group had impaired production of lung interferon-gamma (IFN-gamma), serum immunoglobulin (Ig) G and lung IgA-specific antibodies (all P < 0. 05) although lung IFN-alpha/beta and the relative proportions of bronchial lymph node CD4+ and CD8+ T lymphocytes did not differ between groups after infection. The present study demonstrates a delay in virus clearance in mice fed fish oil associated with reduced IFN-gamma and antibody production and a greater weight loss and suppression of appetite following influenza virus infection. However, differences observed during the course of infection did not affect the ultimate outcome as both groups cleared the virus and returned to preinfection food consumption and body weight by d 7.

Return on research investments: personal good versus public good

NASA Astrophysics Data System (ADS)

Fox, P. A.

2017-12-01

For some time the outputs, i.e. what's produced, of publicly and privately funded research while necessary, are far from sufficient, when considering an overall return on (research) investment. At the present time products such as peer-reviewed papers, websites, data, and software are recognized by funders on timescales related to research awards and reporting. However, from a consumer perspective impact and value are determined at the time a product is discovered, accessed, assessed and used. As is often the case, the perspectives of producer and consumer communities can be distinct and not intersect at all. We contrast personal good, i.e. credit, reputation, with that of public good, e.g. interest, leverage, exploitation, and more. This presentation will elaborate on both the metaphorical and idealogical aspects of applying a "return on investment" frame for the topic of assessing "good".

Impact of atmospheric uncertainties and viscous interaction effects on the performance of aeroassisted orbital transfer vehicles

NASA Technical Reports Server (NTRS)

Talay, T. A.; White, N. H.; Naftel, J. C.

1984-01-01

Simulations of aerobraking trajectories of aeroassisted orbital transfer vehicles (AOTV's) returning from geosynchronous orbit were analyzed to examine the effects of high-altitude viscous interactions and off-nominal atmospheres on AOTV return weight, heating, and loads performance. Viscous interaction effects encountered at high altitudes had little detrimental effect on the return weight capabilities for AOTV's representing a range of lift/drag ratios. Most of the AOTV return weight increase over an all-propulsive OTV occurred for a low lift/drag ratio. Smaller increases in return weight were observed for higher lift/drag ratios, at the expense of significantly higher heating and aerodynamic loads. Off-nominal atmospheres based on Shuttle-derived data and multipliers on a U.S. Standard Atmosphere were considered. AOTV's intended for entry under standard atmospheric conditions either deorbited during the pass through the off-nominal atmospheres or missed the target phasing orbit by wide margins. The AOTV's could successfully negotiate these atmospheres when new bank-angle histories were implemented with little loss and sometimes with a gain in return weight.

Engineering analysis of lightweight high-opacity newsprint production by fiber loading

Treesearch

John H. Klungness; Matthew L. Stroika; Marguerite S. Sykes; Said M. Abubakr; Werner Witek; Oliver U. Heise

1999-01-01

We estimated the capital effectiveness of fiber loading in regard to producing lightweight high-opacity newsprint. Fiber loading enhances fiber bonding at increased precipitated calcium carbonate levels without significant loss in Canadian standard freeness or additional use of energy. We investigated the return on investment (ROI) for fiber loading precipitated...

Recovery from exercise at varying work loads - Time course of responses of heart rate and systolic intervals

NASA Technical Reports Server (NTRS)

Nandi, P. S.; Spodick, D. H.

1977-01-01

The time course of the recovery period was characterized by noninvasive measurements after 4 minute bicycle exercise at 3 separate work loads in volunteers with normal peak responses. Most responses started immediately to return toward resting control values. Left ventricular ejection time and stroke volume change are discussed. Changes in pre-ejection period were determined by changes in isovolume contraction time, and factors affecting the degree and rate of return are considered. The rates of change in the ejection time index and in the ratio pre-ejection period/left ventricular ejection time were virtually independent of load throughout most of recovery.

Return on Investment Analysis for the Almond Board of California

DTIC Science & Technology

2004-06-01

general approach for the analysis is first to identify relevant factors concerning consumer behavior using exploratory factor analysis (EFA) and...That completed the intermediate stage of the conceptual model below, referring to the latent drivers of consumer behavior that affect the almond... consumer behavior remains a challenge that will have to be continuously addressed by the ABC management. Finally, to improve the methodology for

Electrical energy consumption control apparatuses and electrical energy consumption control methods

DOEpatents

Hammerstrom, Donald J.

2012-09-04

Electrical energy consumption control apparatuses and electrical energy consumption control methods are described. According to one aspect, an electrical energy consumption control apparatus includes processing circuitry configured to receive a signal which is indicative of current of electrical energy which is consumed by a plurality of loads at a site, to compare the signal which is indicative of current of electrical energy which is consumed by the plurality of loads at the site with a desired substantially sinusoidal waveform of current of electrical energy which is received at the site from an electrical power system, and to use the comparison to control an amount of the electrical energy which is consumed by at least one of the loads of the site.

Reentry Issues upon Returning from Study Abroad Programs

ERIC Educational Resources Information Center

Wielkiewicz, Richard M.; Turkowski, Laura W.

2010-01-01

The impact of returning from studying abroad was surveyed in 669 college students. Students who studied abroad scored significantly higher on a Reentry Shock scale, reflecting skepticism toward U.S. culture, than those who did not. They were also more likely to consume alcohol. Study abroad had no detectable influence on students' romantic…

Tips for longwall conveyor chain

DOE Office of Scientific and Technical Information (OSTI.GOV)

Courtney, J.C.; Fortune, J.

1977-03-01

Mining chain must be capable of sustaining imposed loads of 80 or 90 percent of its minimum breaking strength, and still return to its original dimensions. This means that the chain should behave like an extremely sophisticated spring up to very high load levels, and return to its unloaded state without any plastic stretch or permanent dimensional deformation having taken place. This feature is absolutely essential, not only to enable repeat loadings to be made, but to ensure that constant, precise engagement of the drive and idler sprockets takes place. The mining chain production process, therefore, is carefully designed somore » that the last stage of manufacture introduces these necessary features.« less

Environmental Assessment of Packaging: The Consumer Point of View

PubMed

Van Dam YK

1996-09-01

When marketing environmentally responsible packaged products, the producer is confronted with consumer beliefs concerning the environmental friendliness of packaging materials. When making environmentally conscious packaging decisions, these consumer beliefs should be taken into account alongside the technical guidelines. Dutch consumer perceptions of the environmental friendliness of packaged products are reported and compared with the results of a life-cycle analysis assessment. It is shown that consumers judge environmental friendliness mainly from material and returnability. Furthermore, the consumer perception of the environmental friendliness of packaging material is based on the postconsumption waste, whereas the environmental effects of production are ignored. From the consumer beliefs concerning environmental friendliness implications are deduced for packaging policy and for environmental policy.KEY WORDS: Consumer behavior; Environment; Food; Packaging; Perception; Waste

10 CFR Appendix J1 to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Automatic and Semi-Automatic Clothes...

Code of Federal Regulations, 2010 CFR

2010-01-01

... characteristics of the clothes load placed in the clothes container, without allowing or requiring consumer... weight of the clothes load placed in the clothes container, without allowing or requiring consumer....4Clothes container means the compartment within the clothes washer that holds the clothes during the...

26 CFR 301.7216-1 - Penalty for disclosure or use of tax return information.

Code of Federal Regulations, 2011 CFR

2011-04-01

..., including a person who develops software that is used to prepare or file a tax return and any Authorized IRS... purchases computer software designed to assist with the preparation and filing of her income tax return. When A loads the software onto her computer, it prompts her to register her purchase of the software...

26 CFR 301.7216-1 - Penalty for disclosure or use of tax return information.

Code of Federal Regulations, 2012 CFR

2012-04-01

..., including a person who develops software that is used to prepare or file a tax return and any Authorized IRS... purchases computer software designed to assist with the preparation and filing of her income tax return. When A loads the software onto her computer, it prompts her to register her purchase of the software...

The Marketing of Education in a Coordinated Decentralised Context: Alfred P. Sloan Revisited.

ERIC Educational Resources Information Center

Watkins, Peter E.

This paper argues that a useful way of analyzing the current moves to locate education within a decentralized framework of schools competing for educational consumers is to return to the founders of managerialism. In particular, this paper suggests that by returning to the point of production, the "mutilated rationality" (Habermas) of…

Losing Chlordimeform Use in Cotton Production. Its Effects on the Economy and Pest Resistance. Agricultural Economic Report Number 587.

ERIC Educational Resources Information Center

Osteen, Craig; Suguiyama, Luis

This report examines the economic implications of losing chlordimeform use on cotton and considers chlordimeform's role in managing the resistance of bollworms and tobacco budworms to synthetic pyrethroids. It estimates changes in prices, production, acreage, consumer expenditures, aggregate producer returns, regional crop effects, and returns to…

Impacts of demand response and renewable generation in electricity power market

NASA Astrophysics Data System (ADS)

Zhao, Zhechong

This thesis presents the objective of the research which is to analyze the impacts of uncertain wind power and demand response on power systems operation and power market clearing. First, in order to effectively utilize available wind generation, it is usually given the highest priority by assigning zero or negative energy bidding prices when clearing the day-ahead electric power market. However, when congestion occurs, negative wind bidding prices would aggravate locational marginal prices (LMPs) to be negative in certain locations. A load shifting model is explored to alleviate possible congestions and enhance the utilization of wind generation, by shifting proper amount of load from peak hours to off peaks. The problem is to determine proper amount of load to be shifted, for enhancing the utilization of wind generation, alleviating transmission congestions, and making LMPs to be non-negative values. The second piece of work considered the price-based demand response (DR) program which is a mechanism for electricity consumers to dynamically manage their energy consumption in response to time-varying electricity prices. It encourages consumers to reduce their energy consumption when electricity prices are high, and thereby reduce the peak electricity demand and alleviate the pressure to power systems. However, it brings additional dynamics and new challenges on the real-time supply and demand balance. Specifically, price-sensitive DR load levels are constantly changing in response to dynamic real-time electricity prices, which will impact the economic dispatch (ED) schedule and in turn affect electricity market clearing prices. This thesis adopts two methods for examining the impacts of different DR price elasticity characteristics on the stability performance: a closed-loop iterative simulation method and a non-iterative method based on the contraction mapping theorem. This thesis also analyzes the financial stability of DR load consumers, by incorporating explicit LMP formulations and consumer payment requirements into the network-constrained unit commitment (NCUC) problem. The proposed model determines the proper amount of DR loads to be shifted from peak hours to off-peaks under ISO's direct load control, for reducing the operation cost and ensuring that consumer payments of DR loads will not deteriorate significantly after load shifting. Both MINLP and MILP models are discussed, and improved formulation strategies are presented.

Load and Academic Attainment in Two Business Schools

ERIC Educational Resources Information Center

Donnelly, Mike; Mccormack, Darcy; Rimmer, Russell

2007-01-01

In this paper the relationship between academic load (the number of modules attempted) and academic performance is investigated in a Scottish and an Australian university. An engagement approach to academic integration is employed, in which there is feedback between load and performance, and in which there is scope for diminishing returns to the…

Supplier Short Term Load Forecasting Using Support Vector Regression and Exogenous Input

NASA Astrophysics Data System (ADS)

Matijaš, Marin; Vukićcević, Milan; Krajcar, Slavko

2011-09-01

In power systems, task of load forecasting is important for keeping equilibrium between production and consumption. With liberalization of electricity markets, task of load forecasting changed because each market participant has to forecast their own load. Consumption of end-consumers is stochastic in nature. Due to competition, suppliers are not in a position to transfer their costs to end-consumers; therefore it is essential to keep forecasting error as low as possible. Numerous papers are investigating load forecasting from the perspective of the grid or production planning. We research forecasting models from the perspective of a supplier. In this paper, we investigate different combinations of exogenous input on the simulated supplier loads and show that using points of delivery as a feature for Support Vector Regression leads to lower forecasting error, while adding customer number in different datasets does the opposite.

Could we do better? Behavioural tracking on recommended consumer health websites.

PubMed

Burkell, Jacquelyn; Fortier, Alexandre

2015-09-01

This study examines behavioural tracking practices on consumer health websites, contrasting tracking on sites recommended by information professionals with tracking on sites returned by Google. Two lists of consumer health websites were constructed: sites recommended by information professionals and sites returned by Google searches. Sites were divided into three groups according to source (Recommended-Only, Google-Only or both) and type (Government, Not-for-Profit or Commercial). Behavioural tracking practices on each website were documented using a protocol that detected cookies, Web beacons and Flash cookies. The presence and the number of trackers that collect personal information were contrasted across source and type of site; a second set of analyses specifically examined Advertising trackers. Recommended-Only sites show lower levels of tracking - especially tracking by advertisers - than do Google-Only sites or sites found through both sources. Government and Not-for-Profit sites have fewer trackers, particularly from advertisers, than do Commercial sites. Recommended sites, especially those from Government or Not-for-Profit organisations, present a lower privacy threat than sites returned by Google searches. Nonetheless, most recommended websites include some trackers, and half include at least one Advertising tracker. To protect patron privacy, information professionals should examine the tracking practices of the websites they recommend. © 2015 Health Libraries Group.

Energy Return On Investment of Engineered Geothermal Systems Data

DOE Data Explorer

Mansure, Chip

2012-01-01

The project provides an updated Energy Return on Investment (EROI) for Enhanced Geothermal Systems (EGS). Results incorporate Argonne National Laboratory's Life Cycle Assessment and base case assumptions consistent with other projects in the Analysis subprogram. EROI is a ratio of the energy delivered to the consumer to the energy consumed to build, operate, and decommission the facility. EROI is important in assessing the viability of energy alternatives. Currently EROI analyses of geothermal energy are either out-of-date, of uncertain methodology, or presented online with little supporting documentation. This data set is a collection of files documenting data used to calculate the Energy Return On Investment (EROI) of Engineered Geothermal Systems (EGS) and erratum to publications prior to the final report. Final report is available from the OSTI web site (http://www.osti.gov/geothermal/). Data in this collections includes the well designs used, input parameters for GETEM, a discussion of the energy needed to haul materials to the drill site, the baseline mud program, and a summary of the energy needed to drill each of the well designs. EROI is the ratio of the energy delivered to the customer to the energy consumed to construct, operate, and decommission the facility. Whereas efficiency is the ratio of the energy delivered to the customer to the energy extracted from the reservoir.

Assured crew return vehicle

NASA Technical Reports Server (NTRS)

Cerimele, Christopher J. (Inventor); Ried, Robert C. (Inventor); Peterson, Wayne L. (Inventor); Zupp, George A., Jr. (Inventor); Stagnaro, Michael J. (Inventor); Ross, Brian P. (Inventor)

1991-01-01

A return vehicle is disclosed for use in returning a crew to Earth from low earth orbit in a safe and relatively cost effective manner. The return vehicle comprises a cylindrically-shaped crew compartment attached to the large diameter of a conical heat shield having a spherically rounded nose. On-board inertial navigation and cold gas control systems are used together with a de-orbit propulsion system to effect a landing near a preferred site on the surface of the Earth. State vectors and attitude data are loaded from the attached orbiting craft just prior to separation of the return vehicle.

Incentive-compatible demand-side management for smart grids based on review strategies

NASA Astrophysics Data System (ADS)

Xu, Jie; van der Schaar, Mihaela

2015-12-01

Demand-side load management is able to significantly improve the energy efficiency of smart grids. Since the electricity production cost depends on the aggregate energy usage of multiple consumers, an important incentive problem emerges: self-interested consumers want to increase their own utilities by consuming more than the socially optimal amount of energy during peak hours since the increased cost is shared among the entire set of consumers. To incentivize self-interested consumers to take the socially optimal scheduling actions, we design a new class of protocols based on review strategies. These strategies work as follows: first, a review stage takes place in which a statistical test is performed based on the daily prices of the previous billing cycle to determine whether or not the other consumers schedule their electricity loads in a socially optimal way. If the test fails, the consumers trigger a punishment phase in which, for a certain time, they adjust their energy scheduling in such a way that everybody in the consumer set is punished due to an increased price. Using a carefully designed protocol based on such review strategies, consumers then have incentives to take the socially optimal load scheduling to avoid entering this punishment phase. We rigorously characterize the impact of deploying protocols based on review strategies on the system's as well as the users' performance and determine the optimal design (optimal billing cycle, punishment length, etc.) for various smart grid deployment scenarios. Even though this paper considers a simplified smart grid model, our analysis provides important and useful insights for designing incentive-compatible demand-side management schemes based on aggregate energy usage information in a variety of practical scenarios.

Further Sensitivity Analysis of Hypothetical Policies to Limit Energy-Related Carbon Dioxide Emissions

EIA Publications

2013-01-01

This analysis supplements the Annual Energy Outlook 2013 alternative cases which imposed hypothetical carbon dioxide emission fees on fossil fuel consumers. It offers further cases that examine the impacts of fees placed only on the emissions from electric power facilities, impacts of returning potential revenues to consumers, and two cap-and-trade policies.

Racial and Gender Differences in Weight Status and Dietary Practices among College Students.

ERIC Educational Resources Information Center

DeBate, Rita DiGioacchino; Sargent, Roger G.; Topping, Marvette

2001-01-01

The nutritional intake, weight status, and dietary practices of college (N=630) students were assessed. The majority did not consume recommended servings of foods each day. Findings that African Americans skip meals and consume fast foods may contribute to the greater amount of weight gain for females since returning to school. Presents…

Transactive control of fast-acting demand response based on thermostatic loads in real-time retail electricity markets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Behboodi, Sahand; Chassin, David P.; Djilali, Ned

Coordinated operation of distributed thermostatic loads such as heat pumps and air conditioners can reduce energy costs and prevents grid congestion, while maintaining room temperatures in the comfort range set by consumers. This paper furthers efforts towards enabling thermostatically controlled loads (TCLs) to participate in real-time retail electricity markets under a transactive control paradigm. An agent-based approach is used to develop an effective and low complexity demand response control scheme for TCLs. The proposed scheme adjusts aggregated thermostatic loads according to real-time grid conditions under both heating and cooling modes. Here, a case study is presented showing the method reducesmore » consumer electricity costs by over 10% compared to uncoordinated operation.« less

Transactive control of fast-acting demand response based on thermostatic loads in real-time retail electricity markets

DOE PAGES

Behboodi, Sahand; Chassin, David P.; Djilali, Ned; ...

2017-07-29

Coordinated operation of distributed thermostatic loads such as heat pumps and air conditioners can reduce energy costs and prevents grid congestion, while maintaining room temperatures in the comfort range set by consumers. This paper furthers efforts towards enabling thermostatically controlled loads (TCLs) to participate in real-time retail electricity markets under a transactive control paradigm. An agent-based approach is used to develop an effective and low complexity demand response control scheme for TCLs. The proposed scheme adjusts aggregated thermostatic loads according to real-time grid conditions under both heating and cooling modes. Here, a case study is presented showing the method reducesmore » consumer electricity costs by over 10% compared to uncoordinated operation.« less

Caffeinated-beverage consumption and its association with socio-demographic characteristics and self-perceived academic stress in first and second year students at the University of Puerto Rico Medical Sciences Campus (UPR-MSC).

PubMed

Ríos, Josué L; Betancourt, Jesmari; Pagán, Ideliz; Fabián, Carla; Cruz, Sonia Y; González, Anaisa M; González, Michael J; Rivera-Soto, Winna T; Palacios, Cristina

2013-06-01

To determine the association between caffeinated-beverage consumption, self-perceived academic load, and self-perceived stress levels in first and second year students at UPR-MSC. A descriptive epidemiological study was performed using a self-administered anonymous questionnaire given to a representative stratified sample of 275 students. Questions included information regarding socio-demographic characteristics, academic load and stress indicators, and caffeinated-beverage consumption. Chi2 was used to assess the associations between these variables. Most participants were women (68%), aged 21-30 years (88%), with low annual household incomes (43%). Most perceived their academic loads as being heavy (68%), and most perceived their academic stress levels as being moderate (37%). Academic load was significantly correlated with stress level (p<0.001). About 88% of the participants reported consuming caffeinated beverages; of those, 87% drank soft drinks, 83% drank coffee, 56% drank hot chocolate, 40% drank tea, and 29% drank energy drinks, all of which were--according to the participants (54%)--used mainly to stay awake. Soft drinks and coffee intake increased in periods of high stress, and many (49%) reported that these beverages were useful for coping with stress. Energy drinks, in particular, were consumed more often by men compared to women (p<0.05). None of these beverages were significantly associated with academic stress or load. Consuming caffeinated beverages is a popular practice among participants in this sample, with soft drinks and coffee being the ones that are the most frequently consumed. No associations were found between the consumption of caffeinated beverages and academic stress or load.

Cognitive Load Theory: An Empirical Study of Anxiety and Task Performance in Language Learning

ERIC Educational Resources Information Center

Chen, I-Jung; Chang, Chi-Cheng

2009-01-01

Introduction: This study explores the relationship among three variables--cognitive load, foreign language anxiety, and task performance. Cognitive load refers to the load imposed on working memory while performing a particular task. The authors hypothesized that anxiety consumes the resources of working memory, leaving less capacity for cognitive…

Particle loading rates for HVAC filters, heat exchangers, and ducts.

PubMed

Waring, M S; Siegel, J A

2008-06-01

The rate at which airborne particulate matter deposits onto heating, ventilation, and air-conditioning (HVAC) components is important from both indoor air quality (IAQ) and energy perspectives. This modeling study predicts size-resolved particle mass loading rates for residential and commercial filters, heat exchangers (i.e. coils), and supply and return ducts. A parametric analysis evaluated the impact of different outdoor particle distributions, indoor emission sources, HVAC airflows, filtration efficiencies, coils, and duct system complexities. The median predicted residential and commercial loading rates were 2.97 and 130 g/m(2) month for the filter loading rates, 0.756 and 4.35 g/m(2) month for the coil loading rates, 0.0051 and 1.00 g/month for the supply duct loading rates, and 0.262 g/month for the commercial return duct loading rates. Loading rates are more dependent on outdoor particle distributions, indoor sources, HVAC operation strategy, and filtration than other considered parameters. The results presented herein, once validated, can be used to estimate filter changing and coil cleaning schedules, energy implications of filter and coil loading, and IAQ impacts associated with deposited particles. The results in this paper suggest important factors that lead to particle deposition on HVAC components in residential and commercial buildings. This knowledge informs the development and comparison of control strategies to limit particle deposition. The predicted mass loading rates allow for the assessment of pressure drop and indoor air quality consequences that result from particle mass loading onto HVAC system components.

Enrolment Choices in Portuguese Higher Education: Do Students Behave as Rational Consumers?

ERIC Educational Resources Information Center

Tavares, Orlanda; Cardoso, Sónia

2013-01-01

As part of a progressive change occurring in the way public sector beneficiaries are conceived, higher education students started to be more and more perceived as clients or consumers. This implies assuming them as rational and conscious actors aware of what to expect from higher education attendance and of its returns. Framed by the metaphor of…

Optimal RTP Based Power Scheduling for Residential Load in Smart Grid

NASA Astrophysics Data System (ADS)

Joshi, Hemant I.; Pandya, Vivek J.

2015-12-01

To match supply and demand, shifting of load from peak period to off-peak period is one of the effective solutions. Presently flat rate tariff is used in major part of the world. This type of tariff doesn't give incentives to the customers if they use electrical energy during off-peak period. If real time pricing (RTP) tariff is used, consumers can be encouraged to use energy during off-peak period. Due to advancement in information and communication technology, two-way communications is possible between consumers and utility. To implement this technique in smart grid, home energy controller (HEC), smart meters, home area network (HAN) and communication link between consumers and utility are required. HEC interacts automatically by running an algorithm to find optimal energy consumption schedule for each consumer. However, all the consumers are not allowed to shift their load simultaneously during off-peak period to avoid rebound peak condition. Peak to average ratio (PAR) is considered while carrying out minimization problem. Linear programming problem (LPP) method is used for minimization. The simulation results of this work show the effectiveness of the minimization method adopted. The hardware work is in progress and the program based on the method described here will be made to solve real problem.

Design of mechanically stabilized earth wall connections and end of walls subjected to seismic loads.

DOT National Transportation Integrated Search

2014-01-01

The 4th Edition of the AASHTO LRFD Bridge Design Specifications requires all states to design for a 1,000- : year return period earthquake, as opposed to earlier editions 500-year return period. In response to this : requirement, the Colorado Depa...

Determination of the boundary conditions of the grinding load in ball mills

NASA Astrophysics Data System (ADS)

Sharapov, Rashid R.

2018-02-01

The prospects of application in ball mills for grinding cement clinker with inclined partitions are shown. It is noted that ball mills with inclined partitions are more effective. An algorithm is proposed for calculating the power consumed by a ball mill with inclined inter-chamber partitions in which an axial movement of the ball load takes place. The boundary conditions in which the ball load is located are determined. The equations of bounding the grinding load are determined. The behavior of a grinding load is considered in view of the characteristic cross sections. The coordinates of the centers of gravity of the grinding load with a definite step and the shape of the cross sections are determined. It is theoretically shown that grinding load in some parts of the ball mill not only consumes, but also helps to rotate the ball mill. Methods for calculating complex analytical expressions for determining the coordinates of the centers of gravity of the grinding load under the conditions of its longitudinal motion have developed. The carried out researches allow to approach from the general positions to research of behavior of a grinding load in the ball mills equipped with various in-mill devices.

The Influence of Purchasing Context and Reversibility of Choice on Consumer Responses Toward Personalized Products and Standardized Products.

PubMed

Choi, Jieun; Lee, Doo-Hee; Taylor, Charles R

2016-04-01

Existing research on personalization has found that consumers generally prefer personalized products over standardized ones. This study argued that consumer preference for personalized products is dependent on purchasing context and reversibility of choice. Results of an experiment conducted in this study found that consumers preferred personalized products when purchasing an item for personal use but preferred standardized products when purchasing an item as a gift. However, the effects of purchasing context were negated when consumers were given the assurance that personalized products could be returned (reversibility of choice); when presented with reversibility of choice, consumers preferred personalized products over standardized products regardless of purchasing context. Theoretical and managerial implications of these results were discussed. © The Author(s) 2016.

Assessing the system value of optimal load shifting

DOE PAGES

Merrick, James; Ye, Yinyu; Entriken, Bob

2017-04-30

We analyze a competitive electricity market, where consumers exhibit optimal load shifting behavior to maximize utility and producers/suppliers maximize their profit under supply capacity constraints. The associated computationally tractable formulation can be used to inform market design or policy analysis in the context of increasing availability of the smart grid technologies that enable optimal load shifting. Through analytic and numeric assessment of the model, we assess the equilibrium value of optimal electricity load shifting, including how the value changes as more electricity consumers adopt associated technologies. For our illustrative numerical case, derived from the Current Trends scenario of the ERCOTmore » Long Term System Assessment, the average energy arbitrage value per ERCOT customer of optimal load shifting technologies is estimated to be $3 for the 2031 scenario year. We assess the sensitivity of this result to the flexibility of load, along with its relationship to the deployment of renewables. Finally, the model presented can also be a starting point for designing system operation infrastructure that communicates with the devices that schedule loads in response to price signals.« less

Assessing the system value of optimal load shifting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Merrick, James; Ye, Yinyu; Entriken, Bob

We analyze a competitive electricity market, where consumers exhibit optimal load shifting behavior to maximize utility and producers/suppliers maximize their profit under supply capacity constraints. The associated computationally tractable formulation can be used to inform market design or policy analysis in the context of increasing availability of the smart grid technologies that enable optimal load shifting. Through analytic and numeric assessment of the model, we assess the equilibrium value of optimal electricity load shifting, including how the value changes as more electricity consumers adopt associated technologies. For our illustrative numerical case, derived from the Current Trends scenario of the ERCOTmore » Long Term System Assessment, the average energy arbitrage value per ERCOT customer of optimal load shifting technologies is estimated to be $3 for the 2031 scenario year. We assess the sensitivity of this result to the flexibility of load, along with its relationship to the deployment of renewables. Finally, the model presented can also be a starting point for designing system operation infrastructure that communicates with the devices that schedule loads in response to price signals.« less

The pricing effect of the common pattern in firm-level idiosyncratic volatility: Evidence from A-Share stocks of China

NASA Astrophysics Data System (ADS)

Su, Zhi; Shu, Tengjia; Yin, Libo

2018-05-01

Inspired by Herskovic et al. (2016), we investigate the pricing effect of the firm-level common idiosyncratic volatility (CIV) in China's A-Share market. Return tests indicate that lower CIV risk loadings bring higher returns significantly, while the pricing function of market volatility (MV) is inconsistent. Strategy that goes long the highest CIV-beta quintile and short the lowest CIV-beta quintile brings an annualized average return of 5%-7%. Our findings supplement Herskovic et al. (2016) by confirming a significantly negative relationship between CIV and stock returns in a developing market.

Subject Load-Harness Interaction During Zero-Gravity Treadmill Exercise

NASA Technical Reports Server (NTRS)

McCrory, Jean L.; Baron, Heidi A.; Derr, Janice A.; Davis, Brian L.; Cavanagh, Peter R.

1996-01-01

When astronauts exercise on orbit, a subject load device (SLD) must be used to return the subject back to the supporting surface. The load in the SLD needs to be transferred the body by a harness which typically distributes this load between the pelvis and We shoulders. Through the use of a zero-gravity simulator, this research compared subject comfort and ground reaction forces during treadmill running at three levels of subject load (60%,80%, and 100% of body weight) in two harness designs ("shoulder only" and "waist "and shoulder ").

Variation of Time Domain Failure Probabilities of Jack-up with Wave Return Periods

NASA Astrophysics Data System (ADS)

Idris, Ahmad; Harahap, Indra S. H.; Ali, Montassir Osman Ahmed

2018-04-01

This study evaluated failure probabilities of jack up units on the framework of time dependent reliability analysis using uncertainty from different sea states representing different return period of the design wave. Surface elevation for each sea state was represented by Karhunen-Loeve expansion method using the eigenfunctions of prolate spheroidal wave functions in order to obtain the wave load. The stochastic wave load was propagated on a simplified jack up model developed in commercial software to obtain the structural response due to the wave loading. Analysis of the stochastic response to determine the failure probability in excessive deck displacement in the framework of time dependent reliability analysis was performed by developing Matlab codes in a personal computer. Results from the study indicated that the failure probability increases with increase in the severity of the sea state representing a longer return period. Although the results obtained are in agreement with the results of a study of similar jack up model using time independent method at higher values of maximum allowable deck displacement, it is in contrast at lower values of the criteria where the study reported that failure probability decreases with increase in the severity of the sea state.

7 CFR 1710.205 - Minimum approval requirements for all load forecasts.

Code of Federal Regulations, 2013 CFR

2013-01-01

... electronically to RUS computer software applications. RUS will evaluate borrower load forecasts for readability...'s engineering planning documents, such as the construction work plan, incorporate consumer and usage...

7 CFR 1710.205 - Minimum approval requirements for all load forecasts.

Code of Federal Regulations, 2011 CFR

2011-01-01

... electronically to RUS computer software applications. RUS will evaluate borrower load forecasts for readability...'s engineering planning documents, such as the construction work plan, incorporate consumer and usage...

7 CFR 1710.205 - Minimum approval requirements for all load forecasts.

Code of Federal Regulations, 2012 CFR

2012-01-01

... electronically to RUS computer software applications. RUS will evaluate borrower load forecasts for readability...'s engineering planning documents, such as the construction work plan, incorporate consumer and usage...

Lunar Return Reentry Thermal Analysis of a Generic Crew Exploration Vehicle Wall Structures

NASA Technical Reports Server (NTRS)

Ko, William L.; Tran, Van T.; Bowles, Jeff

2007-01-01

Thermostructural analysis was performed on generic crew exploration vehicle (GCEV) heat shielded wall structures subjected to reentry heating rates based on five potential lunar return reentry trajectories. The GCEV windward outer wall is fabricated with a graphite/epoxy composite honeycomb sandwich panel and the inner wall with an aluminum honeycomb sandwich panel. The outer wall is protected with an ablative Avcoat-5026-39H/CG thermal protection system (TPS). A virtual ablation method (a graphical approximation) developed earlier was further extended, and was used to estimate the ablation periods, ablation heat loads, and the TPS recession layer depths. It was found that up to 83 95 percent of the total reentry heat load was dissipated in the TPS ablation process, leaving a small amount (3-15 percent) of the remaining total reentry heat load to heat the virgin TPS and maintain the TPS surface at the ablation temperature, 1,200 F. The GCEV stagnation point TPS recession layer depths were estimated to be in the range of 0.280-0.910 in, and the allowable minimum stagnation point TPS thicknesses that could maintain the substructural composite sandwich wall at the limit temperature of 300 F were found to be in the range of 0.767-1.538 in. Based on results from the present analyses, the lunar return abort ballistic reentry was found to be quite attractive because it required less TPS weight than the lunar return direct, the lunar return skipping, or the low Earth orbit guided reentry, and only 11.6 percent more TPS weight than the low Earth orbit ballistic reentry that will encounter a considerable weight penalty to obtain the Earth orbit. The analysis also showed that the TPS weight required for the lunar return skipping reentry was much more than the TPS weight necessary for any of the other reentry trajectories considered.

The effect of nitrogen loading on a brackish estuarine faunal community: A stable isotope approach

USGS Publications Warehouse

Keats, R.A.; Osher, L.J.; Neckles, H.A.

2004-01-01

Coastal ecosystems worldwide face increased nutrient enrichment from shoreline and watershed development and atmospheric pollution. We investigated the response of the faunal community of a small microtidal estuary dominated by Ruppia maritima (widgeon grass) in Maine, United States, to increased nitrogen loading using an in situ mesocosm enrichment experiment. Community response was characterized by assessing quantitative shifts in macroin-vertebrate community composition and identifying changes in food web structure using stable carbon and nitrogen isotope ratios of producers and consumers. The community was dominated by brackish water invertebrates including midge larvae, oligochaetes, damselfly larvae, amphipods, and ostracods. Experimental nutrient additions resulted in significantly lower densities of herbivorous chironomids and predatory damselflies and greater densities of deposit feeding oligochaetes. Grazing midge larvae (Chironomidae: Dicrotendipes, Cricotopus) consumed epiphytic algae under both natural and enriched conditions. Deposit feeding Chironomus was dependent on allochthonous sources of detritus under natural conditions and exhibited a shift to autochthonous sources of detritus under enriched conditions. Predatory Enallagma primarily consumed grazing chironomids under all but the highest loading conditions. Experimental nutrient loading resulted in an increase in generalist deposit feeders dependent on autochthonous sources of detritus.

Digital Load Control Applied to Full-Scale Airframe Fatigue Tests

DTIC Science & Technology

1979-05-01

CONTINUED) WAIT 1 TICK 1/60 SECOND 152 AFFDL-TR-79-3011 FUNCTION ICHECK START DECLARE COMMON AREAS DEFINE SWITCH PATTERNS FOR KILL & MOLD OPTIONAL...TRACE FEATURE RESET ICHECK 0 YES ET IHECKES- KILL OR HOLD ? " ANYBAKRUDRQET? ISYES RETURNAR 5PROGRAMNO RUNNABLE ? 53 AFFDL-TR-79-3011 SUBROUTINE IAIR (I...RETURN C C ERROR RETURNS 998 IDRTR=-i RETURN END C C FUNCTION ICHECK C PURPOSE IS TO CHECK FOR C KILL, STOP, GO REQUESTS FROM CONSOLE OR BUTTONS C AND

Small helicopter could find niche in remote heavy lift operations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-02-21

A new helicopter specifically designed for external vertical lift operations, such as moving transportable rig components or seismic equipment in remote locations, operates more efficiently than most other medium or heavy-lift helicopters, according to manufacturer Kaman Aerospace. The single-pilot helicopter was designed as an aerial truck for efficient lifting of heavy loads but with the operating costs of a light-lift craft. The K-Max helicopter can lift more pounds of cargo per gallon of fuel consumed than other similar helicopters, according to Kaman. For example, to transport a 5,000-lb load at an elevation of 8,000 ft, the K-Max helicopter consumes 85more » gal of fuel/hr. Under the same load conditions, the next most efficient commercially available helicopter consumes 160 gal of fuel/hr and requires two pilots. The 4,500-lb helicopter can lift 5,000 lb to an altitude of 8,000 ft or about 6,000 lb at low altitudes.« less

Residential Consumer-Centric Demand-Side Management Based on Energy Disaggregation-Piloting Constrained Swarm Intelligence: Towards Edge Computing

PubMed Central

Hu, Yu-Chen

2018-01-01

The emergence of smart Internet of Things (IoT) devices has highly favored the realization of smart homes in a down-stream sector of a smart grid. The underlying objective of Demand Response (DR) schemes is to actively engage customers to modify their energy consumption on domestic appliances in response to pricing signals. Domestic appliance scheduling is widely accepted as an effective mechanism to manage domestic energy consumption intelligently. Besides, to residential customers for DR implementation, maintaining a balance between energy consumption cost and users’ comfort satisfaction is a challenge. Hence, in this paper, a constrained Particle Swarm Optimization (PSO)-based residential consumer-centric load-scheduling method is proposed. The method can be further featured with edge computing. In contrast with cloud computing, edge computing—a method of optimizing cloud computing technologies by driving computing capabilities at the IoT edge of the Internet as one of the emerging trends in engineering technology—addresses bandwidth-intensive contents and latency-sensitive applications required among sensors and central data centers through data analytics at or near the source of data. A non-intrusive load-monitoring technique proposed previously is utilized to automatic determination of physical characteristics of power-intensive home appliances from users’ life patterns. The swarm intelligence, constrained PSO, is used to minimize the energy consumption cost while considering users’ comfort satisfaction for DR implementation. The residential consumer-centric load-scheduling method proposed in this paper is evaluated under real-time pricing with inclining block rates and is demonstrated in a case study. The experimentation reported in this paper shows the proposed residential consumer-centric load-scheduling method can re-shape loads by home appliances in response to DR signals. Moreover, a phenomenal reduction in peak power consumption is achieved by 13.97%. PMID:29702607

A sustainable development of a city electrical grid via a non-contractual Demand-Side Management

NASA Astrophysics Data System (ADS)

Samoylenko, Vladislav O.; Pazderin, Andrew V.

2017-06-01

An increasing energy consumption of large cities as well as an extreme high density of city electrical loads leads to the necessity to search for an alternative approaches to city grid development. The ongoing implementation of the energy accounting tariffs with differentiated rates depending upon the market conditions and changing in a short-term perspective, provide the possibility to use it as a financial incentive base of a Demand-Side Management (DSM). Modern hi-technology energy metering and accounting systems with a large number of functions and consumer feedback are supposed to be the good means of DSM. Existing systems of Smart Metering (SM) billing usually provide general information about consumption curve, bills and compared data, but not the advanced statistics about the correspondence of financial and electric parameters. Also, consumer feedback is usually not fully used. So, the efforts to combine the market principle, Smart Metering and a consumer feedback for an active non-contractual load control are essential. The paper presents the rating-based multi-purpose system of mathematical statistics and algorithms of DSM efficiency estimation useful for both the consumers and the energy companies. The estimation is performed by SM Data processing systems. The system is aimed for load peak shaving and load curve smoothing. It is focused primarily on a retail market support. The system contributes to the energy efficiency and a distribution process improvement by the manual management or by the automated Smart Appliances interaction.

Reconciling Consumer and Utility Objectives in the Residential Solar PV Market

NASA Astrophysics Data System (ADS)

Arnold, Michael R.

Today's energy market is facing large-scale changes that will affect all market players. Near the top of that list is the rapid deployment of residential solar photovoltaic (PV) systems. Yet that growing trend will be influenced multiple competing interests between various stakeholders, namely the utility, consumers and technology provides. This study provides a series of analyses---utility-side, consumer-side, and combined analyses---to understand and evaluate the effect of increases in residential solar PV market penetration. Three urban regions have been selected as study locations---Chicago, Phoenix, Seattle---with simulated load data and solar insolation data at each locality. Various time-of-use pricing schedules are investigated, and the effect of net metering is evaluated to determine the optimal capacity of solar PV and battery storage in a typical residential home. The net residential load profile is scaled to assess system-wide technical and economic figures of merit for the utility with an emphasis on intraday load profiles, ramp rates and electricity sales with increasing solar PV penetration. The combined analysis evaluates the least-cost solar PV system for the consumer and models the associated system-wide effects on the electric grid. Utility revenue was found to drop by 1.2% for every percent PV penetration increase, net metering on a monthly or annual basis improved the cost-effectiveness of solar PV but not battery storage, the removal of net metering policy and usage of an improved the cost-effectiveness of battery storage and increases in solar PV penetration reduced the system load factor. As expected, Phoenix had the most favorable economic scenario for residential solar PV, primarily due to high solar insolation. The study location---solar insolation and load profile---was also found to affect the time of year at which the largest net negative system load was realized.

Phase change based cooling for high burst mode heat loads with temperature regulation above the phase change temperature

DOEpatents

The United States of America as represented by the United States Department of Energy

2009-12-15

An apparatus and method for transferring thermal energy from a heat load is disclosed. In particular, use of a phase change material and specific flow designs enables cooling with temperature regulation well above the fusion temperature of the phase change material for medium and high heat loads from devices operated intermittently (in burst mode). Exemplary heat loads include burst mode lasers and laser diodes, flight avionics, and high power space instruments. Thermal energy is transferred from the heat load to liquid phase change material from a phase change material reservoir. The liquid phase change material is split into two flows. Thermal energy is transferred from the first flow via a phase change material heat sink. The second flow bypasses the phase change material heat sink and joins with liquid phase change material exiting from the phase change material heat sink. The combined liquid phase change material is returned to the liquid phase change material reservoir. The ratio of bypass flow to flow into the phase change material heat sink can be varied to adjust the temperature of the liquid phase change material returned to the liquid phase change material reservoir. Varying the flowrate and temperature of the liquid phase change material presented to the heat load determines the magnitude of thermal energy transferred from the heat load.

The Automated Logistics Element Planning System (ALEPS)

NASA Technical Reports Server (NTRS)

Schwaab, Douglas G.

1992-01-01

ALEPS, which is being developed to provide the SSF program with a computer system to automate logistics resupply/return cargo load planning and verification, is presented. ALEPS will make it possible to simultaneously optimize both the resupply flight load plan and the return flight reload plan for any of the logistics carriers. In the verification mode ALEPS will support the carrier's flight readiness reviews and control proper execution of the approved plans. It will also support the SSF inventory management system by providing electronic block updates to the inventory database on the cargo arriving at or departing the station aboard a logistics carrier. A prototype drawer packing algorithm is described which is capable of generating solutions for 3D packing of cargo items into a logistics carrier storage accommodation. It is concluded that ALEPS will provide the capability to generate and modify optimized loading plans for the logistics elements fleet.

Discussion on back-to-back two-stage centrifugal compressor compact design techniques

NASA Astrophysics Data System (ADS)

Huo, Lei; Liu, Huoxing

2013-12-01

Design a small flow back-to-back two-stage centrifugal compressor in the aviation turbocharger, the compressor is compact structure, small axial length, light weighted. Stationary parts have a great influence on their overall performance decline. Therefore, the stationary part of the back-to-back two-stage centrifugal compressor should pay full attention to the diffuser, bend, return vane and volute design. Volute also impact downstream return vane, making the flow in circumferential direction is not uniformed, and several blade angle of attack is drastically changed in downstream of the volute with the airflow can not be rotated to required angle. Loading of high-pressure rotor blades change due to non-uniformed of flow in circumferential direction, which makes individual blade load distribution changed, and affected blade passage load decreased to reduce the capability of work, the tip low speed range increases.

REopt Lite Training Video - Text Version | State, Local, and Tribal

Science.gov Websites

information about your electric load profile. So, if you have hourly interval data from your utility, you can input that by selecting custom load profile. If you don't have that, you can simulate your electric load Palmdale, California. And we're going to simulate this load profile based on a medium office that consumes

16 CFR Figure 1 to Part 1508 - Crib Slat Loading Wedge

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Crib Slat Loading Wedge 1 Figure 1 to Part 1508 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR FULL-SIZE BABY CRIBS Pt. 1508, Fig. 1 Figure 1 to Part 1508—Crib Slat Loading...

The rudiments of an Internet-based health plan for consumers: an interview with John Danaher, MD, MBA. Interview by Richard L. Reece.

PubMed

Danaher, J

2000-01-01

Richard L. Reece, MD, interviewed John Danaher, MD, MBA, on August 16, 2000, to discuss how his new company is preparing for the perfect storm--the looming convergence of demanding consumers, defined contributions, and Internet-based health plans. He describes how his firm is putting financial and clinical tools in the hands of consumers and physicians, so consumers can be more enlightened in their health care choices. Danaher says, "We're not about buying goods and services online. We are transforming the way consumers buy health care and seek insurance. We're trying to be a 401 k where people get on, knowing their risk profile and return horizons. We aim to motivate consumers to be proactive in making health care choices. How do we make consumers responsible and motivated enough to take control of managing their health care costs? How well we articulate this call to consumer action will be the key to our success."

Testing Dose-Dependent Effects of the Nectar Alkaloid Anabasine on Trypanosome Parasite Loads in Adult Bumble Bees.

PubMed

Anthony, Winston E; Palmer-Young, Evan C; Leonard, Anne S; Irwin, Rebecca E; Adler, Lynn S

2015-01-01

The impact of consuming biologically active compounds is often dose-dependent, where small quantities can be medicinal while larger doses are toxic. The consumption of plant secondary compounds can be toxic to herbivores in large doses, but can also improve survival in parasitized herbivores. In addition, recent studies have found that consuming nectar secondary compounds may decrease parasite loads in pollinators. However, the effect of compound dose on bee survival and parasite loads has not been assessed. To determine how secondary compound consumption affects survival and pathogen load in Bombus impatiens, we manipulated the presence of a common gut parasite, Crithidia bombi, and dietary concentration of anabasine, a nectar alkaloid produced by Nicotiana spp. using four concentrations naturally observed in floral nectar. We hypothesized that increased consumption of secondary compounds at concentrations found in nature would decrease survival of uninfected bees, but improve survival and ameliorate parasite loads in infected bees. We found medicinal effects of anabasine in infected bees; the high-anabasine diet decreased parasite loads and increased the probability of clearing the infection entirely. However, survival time was not affected by any level of anabasine concentration, or by interactive effects of anabasine concentration and infection. Crithidia infection reduced survival time by more than two days, but this effect was not significant. Our results support a medicinal role for anabasine at the highest concentration; moreover, we found no evidence for a survival-related cost of anabasine consumption across the concentration range found in nectar. Our results suggest that consuming anabasine at the higher levels of the natural range could reduce or clear pathogen loads without incurring costs for healthy bees.

Energy services in the information age: The convergence of energy, communications, and information technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Centolella, P.A.

1998-07-01

Most of the economic efficiency benefits of electric restructuring--consumer choice based on price and risk preferences, efficient capacity utilization, capacity expansion that reflects marketability, and innovative products--depend upon consumer access to information and opportunities to respond to time- and location-specific prices and customized products. Information and communications technologies from back-room data management centers to intelligent consumer gateways will play an essential role in marketing energy services in a retail access environment. This paper describes the role of information and communications technology in electric industry restructuring and retailing of energy services. It includes a survey of economic analyses on the likelymore » variability in competitive generation prices and consumer responses if such prices are effectively communicated. The paper describes the potential benefits and cost savings associated with flexible consumer responses to price variability. It identifies consumer loads and preferences. Finally, the paper describes the building blocks of information systems being developed to facilitate price-responsive energy management and provide a range of other energy services. Intelligent gateways, analytical tools for facility load prediction and optimizing energy management responses, and electronic commerce applications are discussed.« less

Supporting self-efficacy through interactive discussion in online communities of weight loss.

PubMed

Wang, Ye; Willis, Erin

2016-06-01

By conducting a content analysis of online communities connected by the Weight Watchers' online message boards, this study examined the relationship between conversational interactivity and consumer-generated content about consumer health information, self-efficacious content, and experiences with dieting and physical activities. The results showed that discussion about successful experiences with weight loss tended to be more interactive. Discussion about consumer health information tended to be non-interactive. The findings suggest that online communities generate social support through interactive discussion about successful experiences, and the interactive discussion, in return, sustains active participation in the community.

Tensile Deformation and Adiabatic Heating in Post-Yield Response of Polycarbonate

DTIC Science & Technology

2015-11-01

display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (DD-MM-YYYY) November 2015 2...to investigate the rate-dependent mechanical response from quasi-static to intermediate (~5/s) strain rates using a traditional servo -hydraulic load...less than 7-mm thickness) These specimens were loaded in tension using an Instron servo -hydraulic test frame. Far-field load and stress measurements

PIV measurements in a compact return diffuser under multi-conditions

NASA Astrophysics Data System (ADS)

Zhou, L.; Lu, W. G.; Shi, W. D.

2013-12-01

Due to the complex three-dimensional geometries of impellers and diffusers, their design is a delicate and difficult task. Slight change could lead to significant changes in hydraulic performance and internal flow structure. Conversely, the grasp of the pump's internal flow pattern could benefit from pump design improvement. The internal flow fields in a compact return diffuser have been investigated experimentally under multi-conditions. A special Particle Image Velocimetry (PIV) test rig is designed, and the two-dimensional PIV measurements are successfully conducted in the diffuser mid-plane to capture the complex flow patterns. The analysis of the obtained results has been focused on the flow structure in diffuser, especially under part-load conditions. The vortex and recirculation flow patterns in diffuser are captured and analysed accordingly. Strong flow separation and back flow appeared at the part-load flow rates. Under the design and over-load conditions, the flow fields in diffuser are uniform, and the flow separation and back flow appear at the part-load flow rates, strong back flow is captured at one diffuser passage under 0.2Qdes.

Inflation Accounting Methods and their Effectiveness

DTIC Science & Technology

1992-06-01

security is measured by the standard deviation of its returns in the past periods and is reflected in the security’ s market price . The Capital Asset Pricing ...purchasing power should be limited to items which are used by an average consumer. Economists tend to perceive the general price level as the cost of living...accounting. Two common measures of business performance are income and rate of return on capital . Since depreciation charges for long-lived assets do

36 CFR 1254.42 - What are the rules that apply to using self-service microfilm?

Code of Federal Regulations, 2011 CFR

2011-07-01

... finished, remove it from the reader, and return it to the proper microfilm box. You must carefully remove from and return to the proper microfilm boxes rewound microfilm. You must take care when loading and... you discover it. (c) Unless we make an exception, you may use only one roll of microfilm at a time. (d...

36 CFR 1254.42 - What are the rules that apply to using self-service microfilm?

Code of Federal Regulations, 2010 CFR

2010-07-01

... finished, remove it from the reader, and return it to the proper microfilm box. You must carefully remove from and return to the proper microfilm boxes rewound microfilm. You must take care when loading and... you discover it. (c) Unless we make an exception, you may use only one roll of microfilm at a time. (d...

36 CFR 1254.42 - What are the rules that apply to using self-service microfilm?

Code of Federal Regulations, 2012 CFR

2012-07-01

... finished, remove it from the reader, and return it to the proper microfilm box. You must carefully remove from and return to the proper microfilm boxes rewound microfilm. You must take care when loading and... you discover it. (c) Unless we make an exception, you may use only one roll of microfilm at a time. (d...

36 CFR 1254.42 - What are the rules that apply to using self-service microfilm?

Code of Federal Regulations, 2014 CFR

2014-07-01

... finished, remove it from the reader, and return it to the proper microfilm box. You must carefully remove from and return to the proper microfilm boxes rewound microfilm. You must take care when loading and... you discover it. (c) Unless we make an exception, you may use only one roll of microfilm at a time. (d...

Magellan Project: Evolving enhanced operations efficiency to maximize science value

NASA Technical Reports Server (NTRS)

Cheuvront, Allan R.; Neuman, James C.; Mckinney, J. Franklin

1994-01-01

Magellan has been one of NASA's most successful spacecraft, returning more science data than all planetary spacecraft combined. The Magellan Spacecraft Team (SCT) has maximized the science return with innovative operational techniques to overcome anomalies and to perform activities for which the spacecraft was not designed. Commanding the spacecraft was originally time consuming because the standard development process was envisioned as manual tasks. The Program understood that reducing mission operations costs were essential for an extended mission. Management created an environment which encouraged automation of routine tasks, allowing staff reduction while maximizing the science data returned. Data analysis and trending, command preparation, and command reviews are some of the tasks that were automated. The SCT has accommodated personnel reductions by improving operations efficiency while returning the maximum science data possible.

Managing the Night Off-Peak Power Demand in the Central Region UPS with Newly Commissioned NPP Capacities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aminov, R. Z.; Pron’, D. M.

2014-01-15

The use of hydrogen technologies as a controlled-load consumer based on the newly commissioned base-load nuclear power plants to level out the daily load profile is justified for the Unified Power System (UPS) of the Central Region of Russia, as an example, for the period till 2020.

Influence of load type on power factor and harmonic composition of three-phase rectifier current

NASA Astrophysics Data System (ADS)

Nikolayzin, N. V.; Vstavskaya, E. V.; Konstantinov, V. I.; Konstantinova, O. V.

2018-05-01

This article is devoted to research of the harmonic composition of the three-phase rectifier current consumed when it operates with different types of load. The results are compared with Standard requirements.

Meteorology Assessment of Historic Rainfall for Los Alamos During September 2013

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bruggeman, David Alan; Dewart, Jean Marie

2016-02-12

DOE Order 420.1, Facility Safety, requires that site natural phenomena hazards be evaluated every 10 years to support the design of nuclear facilities. The evaluation requires calculating return period rainfall to determine roof loading requirements and flooding potential based on our on-site rainfall measurements. The return period rainfall calculations are done based on statistical techniques and not site-specific meteorology. This and future studies analyze the meteorological factors that produce the significant rainfall events. These studies provide the meteorology context of the return period rainfall events.

Concierge Medicine: A Viable Business Model for (Some) Physicians of the Future?

PubMed

Paul, David P; Skiba, Michaeline

Concierge medicine is a medical management structure that has been in existence since the 1990s. Essentially, a typical concierge medical practice limits its number of patients and provides highly personalized attention that includes comprehensive annual physicals, same-day appointments, preventive and wellness care, and fast, 24/7 response time. Concierge medicine has become popular among both physicians and patients/consumers who are frustrated by the limitations imposed by managed care organizations. From many physicians' perspectives, concierge medicine offers greater autonomy, the opportunity to return to a more manageable patient load, and the chance to improve their incomes that have declined because of increasingly lowered reimbursements for their services. From many patients'/consumers' perspectives, concierge medicine provides more immediate, convenient, and caring access to their primary care physicians and, regardless of their physician's annual retainer fee, the elimination of third-party insurance coverage costs and hassles. The major criticisms of the concierge medicine model come from some health care policy makers and experts, who believe that concierge medicine is elitist and its widespread implementation will increase the shortage of primary care physicians, which is already projected to become worse because of the Affordable Care Act's individual mandate, which requires everyone to have health insurance.Utilizing these topics as its framework, this article explains why concierge medicine's form of medical management is gaining ground, cites its advantages and disadvantages for stakeholders, and examines some of the issues that will affect its growth.

A Coupled Model for Simulating Future Wildfire Regimes in the Western U.S.

NASA Astrophysics Data System (ADS)

Bart, R. R.; Kennedy, M. C.; Tague, C.; Hanan, E. J.

2017-12-01

Higher temperatures and larger fuel loads in the western U.S. have increased the size and intensity of wildfires over the past decades. However, it is unclear if this trend will continue over the long-term since increased wildfire activity has the countering effect of reducing landscape fuel loads, while higher temperatures alter the rate of vegetation recovery following fire. In this study, we introduce a coupled ecohydrologic-fire model for investigating how changes in vegetation, forest management, climate, and hydrology may affect future fire regimes. The spatially-distributed ecohydrologic model, RHESSys, simulates hydrologic, carbon and nutrient fluxes at watershed scales; the fire-spread model, WMFire, stochastically propagates fire on a landscape based on conditions in the ecohydrologic model. We use the coupled model to replicate fire return intervals in multiple ecoregions within the western U.S., including the southern Sierra Nevada and southern California. We also examine the sensitivity of fire return intervals to various model processes, including litter production, fire severity, and post-fire vegetation recovery rates. Results indicate that the coupled model is able to replicate expected fire return intervals in the selected locations. Fire return intervals were highly sensitive to the rate of vegetation growth, with longer fire return intervals associated with slower growing vegetation. Application of the model is expected to aid in our understanding of how fuel treatments, climate change and droughts may affect future fire regimes.

Molecular Detection of Leptospira in Two Returned Travelers: Higher Bacterial Load in Cerebrospinal Fluid versus Serum or Plasma

PubMed Central

Waggoner, Jesse J.; Soda, Elizabeth A.; Seibert, Ryan; Grant, Philip; Pinsky, Benjamin A.

2015-01-01

Leptospirosis is a potentially severe illness in returned travelers. Patients often present with fever, headache, and neck pain, which may lead to a workup for meningitis including the acquisition of cerebrospinal fluid (CSF). Although Leptospira DNA has been detected in CSF by polymerase chain reaction (PCR), little data exist regarding the utility of testing CSF in addition to serum or plasma obtained on presentation. In this report, we present two cases of leptospirosis in returned travelers presenting with fever and headache. Our first patient had neutrophilic meningitis, and Leptospira was detectable only in CSF obtained on admission. The second patient had a normal CSF profile, but Leptospira was detected in CSF at a bacterial load 5- to 10-fold higher than that in plasma. CSF is an important specimen for the diagnosis of Leptospira by molecular methods and may yield an actionable diagnosis in the absence of leptospiremia. PMID:26033024

Appetitive and Dietary Effects of Consuming an Energy-Dense Food (Peanuts) with or between Meals by Snackers and Nonsnackers.

PubMed

Devitt, A A; Kuevi, A; Coelho, S B; Lartey, A; Lokko, P; Costa, N; Bressan, J; Mattes, R D

2011-01-01

Background. Energy-dense foods are inconsistently implicated in elevated energy intake (EI). This may stem from other food properties and/or differences in dietary incorporation, that is, as snacks or with meals. Objective. Assess intake pattern and food properties on acute appetitive ratings (AR) and EI. Design. 201 normal and overweight adults consuming a standard lunch. Test loads of 1255.2 kJ (300 kcal) were added to the lunch or provided as snack. Loads (peanuts, snack mix, and snack mix with peanuts) were energy, macronutrient, and volumetrically matched with a lunch portion as control. Participants completed meal and snack sessions of their randomly assigned load. Results. No differences were observed in daily EI or AR for meal versus snack or treatment versus control. Consumption of peanuts as a snack tended to strengthen dietary compensation compared to peanuts or other loads with a meal. Conclusions. Inclusion of an energy-dense food as a snack or meal component had comparable influence on AR and EI. Peanuts tended to elicit stronger dietary compensation when consumed as a snack versus with a meal. If substantiated, this latter observation suggests that properties other than those controlled here (energy, macronutrient content, and volume) modify AR and EI.

Phosphorus losses from an irrigated watershed in the northwestern United States: case study of the upper snake rock watershed.

PubMed

Bjorneberg, David L; Leytem, April B; Ippolito, James A; Koehn, Anita C

2015-03-01

Watersheds using surface water for irrigation often return a portion of the water to a water body. This irrigation return flow often includes sediment and nutrients that reduce the quality of the receiving water body. Research in the 82,000-ha Upper Snake Rock (USR) watershed from 2005 to 2008 showed that, on average, water diverted from the Snake River annually supplied 547 kg ha of total suspended solids (TSS), 1.1 kg ha of total P (TP), and 0.50 kg ha of dissolved P (DP) to the irrigation tract. Irrigation return flow from the USR watershed contributed 414 kg ha of TSS, 0.71 kg ha of TP, and 0.32 kg ha of DP back to the Snake River. Significantly more TP flowed into the watershed than returned to the Snake River, whereas there was no significant difference between inflow and return flow loads for TSS and DP. Average TSS and TP concentrations in return flow were 71 and 0.12 mg L, respectively, which exceeded the TMDL limits of 52 mg L TSS and 0.075 mg L TP set for this section of the Snake River. Monitoring inflow and outflow for five water quality ponds constructed to reduce sediment and P losses from the watershed showed that TSS concentrations were reduced 36 to 75%, but DP concentrations were reduced only 7 to 16%. This research showed that continued implementation of conservation practices should result in irrigation return flow from the USR watershed meeting the total maximum daily load limits for the Snake River. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

Meniscus repair: the role of accelerated rehabilitation in return to sport.

PubMed

Kozlowski, Erick J; Barcia, Anthony M; Tokish, John M

2012-06-01

With increasing understanding of the detrimental effects of the meniscectomized knee on outcomes and long-term durability, there is an ever increasing emphasis on meniscal preservation through repair. Repair in the young athlete is particularly challenging given the goals of returning to high-level sports. A healed meniscus is only the beginning of successful return to activity, and the understanding of "protection with progression" must be emphasized to ensure optimal return to performance. The principles of progression from low to high loads, single to multiplane activity, slow to high speeds, and stable to unstable platforms are cornerstones to this process. Emphasis on the kinetic chain environment that the knee will function within cannot be overemphasized. Communication between the operating surgeon and rehabilitation specialist is critical to optimizing effective return to sports.

Dynamic Response of Reinforced Soil Systems. Volume 2. Appendices

DTIC Science & Technology

1993-03-01

by a burster slab. These protection measures are costly, time consuming to construct, and sensitive to multiple strikes. Soil has been used to...load--deflection behavior of the reinforced soi I Dynamic puilout tests were then performed using the same parameters as the static tests. A standard...system was capable cf loading the sample in just a few micro-seconds to simulate a blast load. Dynamic load-deflection behavior was characterized and

The value of supply chain coordination under moral hazard: A case study of the consumer product supply chain.

PubMed

Lee, Yumi; Song, Sang Hwa; Cheong, Taesu

2018-01-01

In this paper, we examine a real-world case related to the consumer product supply chain to analyze the value of supply chain coordination under the condition of moral hazard. Because of the characteristics of a buyback contract scheme employed in the supply chain, the supplier company's sales department encourages retailers to order more inventory to meet their sales target, whereas retailers pay less attention to their inventory level and leftovers at the end of the season. This condition induces moral hazard problems in the operation of the supply chain, as suppliers suffer from huge returns of leftover inventory. This, in turn, is related to the obsolescence of returned inventory, even with penalty terms in the contract for the return of any leftovers. In this study, we show under the current buyback-based supply chain operation, the inventory levels of both the supplier and retailers exceed customer demand and develop vendor-managed inventory (VMI) system with base stock policy to remove any mismatch of supply and demand. A comparison of both systems shows that through the proper coordination of supply chain operations, both suppliers and retailers can gain additional benefits while providing proper services to end customers.

An analysis of preferences for hazardous substances free products: manufacturing, use and end of life of mobile phones.

PubMed

Kaushal, Rajendra Kumar; Nema, Arvind K

2012-11-01

Electronic communication devices such as mobile phones pose significant environmental risks when disposed of after the end of their useful life. Mobile communication devices are one of the fastest growing contributors to the electronic waste (e-waste) stream. Recent legislative pressure and increasing awareness about the environmental risk associated with the hazardous components of the electronic products warrants the manufacturers to reduce or replace the hazardous materials with alternatives. The present study analyses the economic consequences of reducing or replacing these hazardous materials and the possible response of the consumers. A strategic game theory model has been applied in this paper for manufacturer and consumers considering the cost difference between hazardous substances free (HSF) and hazardous substance (HS) mobile. Results suggest that the HSF mobiles can be a preferred choice of the manufacturers as well as consumers if the cost of disposal of HS mobiles can be internalized and a marginal incentive (e.g. 0.9% for a cost difference to 5%, and 5.3% for a cost difference to 10%) is given. The study further highlights the need for realizing the fact that passing on the incentives to the consumers in order to promote schemes for return back to manufacturer at its end of life for effective reuse and recycling gives higher returns.

Identification of chemicals, possibly originating from misuse of refillable PET bottles, responsible for consumer complaints about off-odours in water and soft drinks.

PubMed

Widén, H; Leufvén, A; Nielsen, T

2005-07-01

Mineral water and soft drinks with a perceptible off-odour were analysed to identify contaminants originating from previous misuse of the refillable polyethylene terephthalate (PET) bottle. Consumers detected the off-odour after opening the bottle and duly returned it with the remaining content to the producers. The contaminants in question had thus been undetected by the in-line detection devices (so-called 'sniffers') that are supposed to reject misused bottles. GC-MS analysis was carried out on the headspace of 31 returned products and their corresponding reference products, and chromatograms were compared to find the possible off-odour compounds. Substances believed to be responsible for the organoleptic change were 2-methoxynaphthalene (10 bottles), dimethyl disulfide (4), anethole (3), petroleum products (4), ethanol with isoamyl alcohol (1) and a series of ethers (1). The mouldy/musty odour (5 bottles) was caused by trichloroanisole in one instance. In some cases, the origins of the off-odours are believed to be previous consumer misuse of food products (liquorice-flavoured alcohol, home-made alcohol containing fusel oil) or non-food products (cleaning products, petroleum products, oral moist snuff and others). The results also apply to 1.5-litre recyclable PET bottles, since the nature and extent of consumer misuse can be expected to be similar for the two bottle types.

36 CFR § 1254.42 - What are the rules that apply to using self-service microfilm?

Code of Federal Regulations, 2013 CFR

2013-07-01

... finished, remove it from the reader, and return it to the proper microfilm box. You must carefully remove from and return to the proper microfilm boxes rewound microfilm. You must take care when loading and... you discover it. (c) Unless we make an exception, you may use only one roll of microfilm at a time. (d...

Common In-Situ Consumable Production Plant for Robotic Mars Exploration

NASA Technical Reports Server (NTRS)

Sanders, G. B.; Trevathan, J. R.; Peters, T. A.; Baird, R. S.

2000-01-01

Utilization of extraterrestrial resources, or In-Situ Resource Utilization (ISRU), is viewed by the Human Exploration and Development of Space (HEDS) Enterprise as an enabling technology for the exploration and commercial development of space. A key subset of ISRU which has significant cost, mass, and risk reduction benefits for robotic and human exploration, and which requires a minimum of infrastructure, is In-Situ Consumable Production (ISCP). ISCP involves acquiring, manufacturing, and storing mission consumables from in situ resources, such as propellants, fuel cell reagents, and gases for crew and life support, inflation, science and pneumatic equipment. One of the four long-term goals for the Space Science Enterprise (SSE) is to 'pursue space science programs that enable and are enabled by future human exploration beyond low-Earth orbit - a goal exploiting the synergy with the human exploration of space'. Adequate power and propulsion capabilities are critical for both robotic and human exploration missions. Minimizing the mass and volume of these systems can reduce mission cost or enhance the mission by enabling the incorporation of new science or mission-relevant equipment. Studies have shown that in-situ production of oxygen and methane propellants can enhance sample return missions by enabling larger samples to be returned to Earth or by performing Direct Earth Return (DER) sample return missions instead of requiring a Mars Orbit Rendezvous (MOR). Recent NASA and Department of Energy (DOE) work on oxygen and hydrocarbon-based fuel cell power systems shows the potential of using fuel cell power systems instead of solar arrays and batteries for future rovers and science equipment. The development and use of a common oxygen/methane ISCP plant for propulsion and power generation can extend and enhance the scientific exploration of Mars while supporting the development and demonstration of critical technologies and systems for the human exploration of Mars.

Common In-Situ Consumable Production Plant for Robotic Mars Exploration

NASA Astrophysics Data System (ADS)

Sanders, G. B.; Trevathan, J. R.; Peters, T. A.; Baird, R. S.

2000-07-01

Utilization of extraterrestrial resources, or In-Situ Resource Utilization (ISRU), is viewed by the Human Exploration and Development of Space (HEDS) Enterprise as an enabling technology for the exploration and commercial development of space. A key subset of ISRU which has significant cost, mass, and risk reduction benefits for robotic and human exploration, and which requires a minimum of infrastructure, is In-Situ Consumable Production (ISCP). ISCP involves acquiring, manufacturing, and storing mission consumables from in situ resources, such as propellants, fuel cell reagents, and gases for crew and life support, inflation, science and pneumatic equipment. One of the four long-term goals for the Space Science Enterprise (SSE) is to 'pursue space science programs that enable and are enabled by future human exploration beyond low-Earth orbit - a goal exploiting the synergy with the human exploration of space'. Adequate power and propulsion capabilities are critical for both robotic and human exploration missions. Minimizing the mass and volume of these systems can reduce mission cost or enhance the mission by enabling the incorporation of new science or mission-relevant equipment. Studies have shown that in-situ production of oxygen and methane propellants can enhance sample return missions by enabling larger samples to be returned to Earth or by performing Direct Earth Return (DER) sample return missions instead of requiring a Mars Orbit Rendezvous (MOR). Recent NASA and Department of Energy (DOE) work on oxygen and hydrocarbon-based fuel cell power systems shows the potential of using fuel cell power systems instead of solar arrays and batteries for future rovers and science equipment. The development and use of a common oxygen/methane ISCP plant for propulsion and power generation can extend and enhance the scientific exploration of Mars while supporting the development and demonstration of critical technologies and systems for the human exploration of Mars.

16 CFR Figures 2 and 3 to Part 1512 - Handlebar Stem Loading and Entrance 8 Observation Angles

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Handlebar Stem Loading and Entrance 8 Observation Angles 2 Figures 2 and 3 to Part 1512 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION... and 3 to Part 1512—Handlebar Stem Loading and Entrance 8 Observation Angles EC03OC91.071 ...

16 CFR Figures 2 and 3 to Part 1512 - Handlebar Stem Loading and Entrance 8 Observation Angles

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Handlebar Stem Loading and Entrance 8 Observation Angles 2 Figures 2 and 3 to Part 1512 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION... and 3 to Part 1512—Handlebar Stem Loading and Entrance 8 Observation Angles EC03OC91.071 ...

16 CFR Figures 2 and 3 to Part 1512 - Handlebar Stem Loading and Entrance 8 Observation Angles

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Handlebar Stem Loading and Entrance 8 Observation Angles 2 Figures 2 and 3 to Part 1512 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION... and 3 to Part 1512—Handlebar Stem Loading and Entrance 8 Observation Angles EC03OC91.071 ...

A mathematical method for quantifying in vivo mechanical behaviour of heel pad under dynamic load.

PubMed

Naemi, Roozbeh; Chatzistergos, Panagiotis E; Chockalingam, Nachiappan

2016-03-01

Mechanical behaviour of the heel pad, as a shock attenuating interface during a foot strike, determines the loading on the musculoskeletal system during walking. The mathematical models that describe the force deformation relationship of the heel pad structure can determine the mechanical behaviour of heel pad under load. Hence, the purpose of this study was to propose a method of quantifying the heel pad stress-strain relationship using force-deformation data from an indentation test. The energy input and energy returned densities were calculated by numerically integrating the area below the stress-strain curve during loading and unloading, respectively. Elastic energy and energy absorbed densities were calculated as the sum of and the difference between energy input and energy returned densities, respectively. By fitting the energy function, derived from a nonlinear viscoelastic model, to the energy density-strain data, the elastic and viscous model parameters were quantified. The viscous and elastic exponent model parameters were significantly correlated with maximum strain, indicating the need to perform indentation tests at realistic maximum strains relevant to walking. The proposed method showed to be able to differentiate between the elastic and viscous components of the heel pad response to loading and to allow quantifying the corresponding stress-strain model parameters.

Lie construction affects information storage under high memory load condition.

PubMed

Liu, Yuqiu; Wang, Chunjie; Jiang, Haibo; He, Hongjian; Chen, Feiyan

2017-01-01

Previous studies indicate that lying consumes cognitive resources, especially working memory (WM) resources. Considering the dual functions that WM might play in lying: holding the truth-related information and turning the truth into lies, the present study examined the relationship between the information storage and processing in the lie construction. To achieve that goal, a deception task based on the old/new recognition paradigm was designed, which could manipulate two levels of WM load (low-load task using 4 items and high-load task using 6 items) during the deception process. The analyses based on the amplitude of the contralateral delay activity (CDA), a proved index of the number of representations being held in WM, showed that the CDA amplitude was lower in the deception process than that in the truth telling process under the high-load condition. In contrast, under the low-load condition, no CDA difference was found between the deception and truth telling processes. Therefore, we deduced that the lie construction and information storage compete for WM resources; when the available WM resources cannot meet this cognitive demand, the WM resources occupied by the information storage would be consumed by the lie construction.

Lie construction affects information storage under high memory load condition

PubMed Central

Liu, Yuqiu; Wang, Chunjie; Jiang, Haibo; He, Hongjian; Chen, Feiyan

2017-01-01

Previous studies indicate that lying consumes cognitive resources, especially working memory (WM) resources. Considering the dual functions that WM might play in lying: holding the truth-related information and turning the truth into lies, the present study examined the relationship between the information storage and processing in the lie construction. To achieve that goal, a deception task based on the old/new recognition paradigm was designed, which could manipulate two levels of WM load (low-load task using 4 items and high-load task using 6 items) during the deception process. The analyses based on the amplitude of the contralateral delay activity (CDA), a proved index of the number of representations being held in WM, showed that the CDA amplitude was lower in the deception process than that in the truth telling process under the high-load condition. In contrast, under the low-load condition, no CDA difference was found between the deception and truth telling processes. Therefore, we deduced that the lie construction and information storage compete for WM resources; when the available WM resources cannot meet this cognitive demand, the WM resources occupied by the information storage would be consumed by the lie construction. PMID:28727794

Notes from the field: campylobacteriosis outbreak associated with consuming undercooked chicken liver pâté - Ohio and Oregon, December 2013-January 2014.

PubMed

Scott, Magdalena Kendall; Geissler, Aimee; Poissant, Tasha; DeBess, Emilio; Melius, Beth; Eckmann, Kaye; Salehi, Ellen; Cieslak, Paul R

2015-04-17

On January 8, 2014, the Ohio Department of Health notified the Oregon Public Health Division (OPHD) of campylobacteriosis in two Ohio residents recently returned from Oregon. The travelers reported consuming chicken liver pâté* at an Oregon restaurant. On January 10, OPHD received additional reports of campylobacteriosis in two persons who had consumed chicken liver pâté at another Oregon restaurant. Campylobacter jejuni was isolated in cultures of fecal specimens from three patients. OPHD investigated to determine the sources of the illnesses and to institute preventive measures.

Convergence and dissonance: evolution in private-sector approaches to disease management and care coordination.

PubMed

Mays, Glen P; Au, Melanie; Claxton, Gary

2007-01-01

Disease management (DM) approaches survived the 1990s backlash against managed care because of their potential for consumer-friendly cost containment, but purchasers have been cautious about investing heavily in them because of uncertainty about return on investment. This study examines how private-sector approaches to DM have evolved over the past two years in the midst of the movement toward consumer-driven health care. Findings indicate that these programs have become standard features of health plan design, despite a thin evidence base concerning their effectiveness. Uncertainties remain regarding how well these programs will function within benefit designs that require higher consumer cost sharing.

Postprandial glucose and insulin levels in type 2 diabetes mellitus patients after consumption of ready-to-eat mixed meals.

PubMed

Manios, Yannis; Moschonis, George; Mavrogianni, Christina; Tsoutsoulopoulou, Konstantina; Kogkas, Stergios; Lambrinou, Christina-Paulina; Efstathopoulou, Eirini

2017-04-01

To compare the effects of three ready-to-eat mixed meals, with a high fiber content and low glycemic index, on postprandial glycemic and insulinemic response in patients with Type 2 diabetes mellitus (T2DM). The current study followed a prospective, three-way, cross-over design. Twenty-four patients with T2DM consumed three ready-to-eat mixed meals, i.e., "wild greens pie" (meal 1), "chicken burgers with boiled vegetables" (meal 2) and "vegetable moussaka" (meal 3) and an oral glucose load, all providing 50 g of carbohydrates. Venous blood was collected at 0, 30, 60, 90 and 120 min postprandial. Statistical analyses included repeated measures analysis of variance and calculations of the area under the glucose and insulin curves (AUC) for each one of the test meals and the oral glucose load. Patients consuming each one of the three mixed meals showed better postprandial glycemic responses compared to the oral glucose load (P < 0.001). Furthermore, patients consuming meal 3 showed a better insulinemic response compared to the oral glucose load and meal 1, after 60 and 120 min postprandial, respectively (P < 0.05). In addition, the increase observed in HOMA-IR values from T0 to T120 was significantly lower for meal 3, compared to the oral glucose load (P < 0.001). The three ready-to-eat mixed meals examined in the present study were found to elicit significantly lower glycemic responses compared to the oral glucose load in diabetic patients. The mixed meals examined in the present study could be proposed as effective, palatable and practical solutions for diabetics for glucose control.

Pupillary Responses as a Biomarker of Diminished Effort Associated With Defeatist Attitudes and Negative Symptoms in Schizophrenia.

PubMed

Granholm, Eric; Ruiz, Ivan; Gallegos-Rodriguez, Yuliana; Holden, Jason; Link, Peter C

2016-10-15

The hypothesis that defeatist performance attitudes are associated with decreased goal-directed task effort and negative symptoms in consumers with schizophrenia was investigated by using pupillary responses as a biomarker of task effort. Pupillary dilation during cognitive tasks provides a biomarker of effort devoted to the task, with greater dilation indicating greater effort. Defeatist attitudes were assessed in 149 consumers with schizophrenia or schizoaffective disorder and 50 healthy control subjects, and consumers were divided into three groups (tertile split) with respect to severity of defeatist attitudes. Pupillary dilation responses were recorded during a digit-span task with three-, six-, and nine-digit spans. Effort allocation (pupillary responses) to the task increased as the processing load increased from low (three-digit) to moderate (six-digit) demands in healthy control subjects and consumers with schizophrenia with mild and moderate severity of defeatist attitudes. In contrast, consumers with severe defeatist attitudes did not increase their effort when processing demands increased from low to moderate loads. These consumers showed significantly less effort in the six-digit condition relative to consumers with mild defeatist attitudes. Moreover, consumers with severe defeatist attitudes showed significantly greater severity of negative symptoms relative to consumers with mild defeatist attitudes and negative symptoms were significantly correlated with defeatist attitudes. These results suggest a relationship between defeatist performance attitudes, goal-directed task effort indexed by pupillary responses, and negative symptoms in schizophrenia. The findings have implications for using cognitive therapy to reduce defeatist attitudes that may contribute to diminished effort and negative symptoms in schizophrenia. Published by Elsevier Inc.

Residential Consumer-Centric Demand-Side Management Based on Energy Disaggregation-Piloting Constrained Swarm Intelligence: Towards Edge Computing.

PubMed

Lin, Yu-Hsiu; Hu, Yu-Chen

2018-04-27

The emergence of smart Internet of Things (IoT) devices has highly favored the realization of smart homes in a down-stream sector of a smart grid. The underlying objective of Demand Response (DR) schemes is to actively engage customers to modify their energy consumption on domestic appliances in response to pricing signals. Domestic appliance scheduling is widely accepted as an effective mechanism to manage domestic energy consumption intelligently. Besides, to residential customers for DR implementation, maintaining a balance between energy consumption cost and users’ comfort satisfaction is a challenge. Hence, in this paper, a constrained Particle Swarm Optimization (PSO)-based residential consumer-centric load-scheduling method is proposed. The method can be further featured with edge computing. In contrast with cloud computing, edge computing—a method of optimizing cloud computing technologies by driving computing capabilities at the IoT edge of the Internet as one of the emerging trends in engineering technology—addresses bandwidth-intensive contents and latency-sensitive applications required among sensors and central data centers through data analytics at or near the source of data. A non-intrusive load-monitoring technique proposed previously is utilized to automatic determination of physical characteristics of power-intensive home appliances from users’ life patterns. The swarm intelligence, constrained PSO, is used to minimize the energy consumption cost while considering users’ comfort satisfaction for DR implementation. The residential consumer-centric load-scheduling method proposed in this paper is evaluated under real-time pricing with inclining block rates and is demonstrated in a case study. The experimentation reported in this paper shows the proposed residential consumer-centric load-scheduling method can re-shape loads by home appliances in response to DR signals. Moreover, a phenomenal reduction in peak power consumption is achieved by 13.97%.

Modeling and Analysis of Commercial Building Electrical Loads for Demand Side Management

NASA Astrophysics Data System (ADS)

Berardino, Jonathan

In recent years there has been a push in the electric power industry for more customer involvement in the electricity markets. Traditionally the end user has played a passive role in the planning and operation of the power grid. However, many energy markets have begun opening up opportunities to consumers who wish to commit a certain amount of their electrical load under various demand side management programs. The potential benefits of more demand participation include reduced operating costs and new revenue opportunities for the consumer, as well as more reliable and secure operations for the utilities. The management of these load resources creates challenges and opportunities to the end user that were not present in previous market structures. This work examines the behavior of commercial-type building electrical loads and their capacity for supporting demand side management actions. This work is motivated by the need for accurate and dynamic tools to aid in the advancement of demand side operations. A dynamic load model is proposed for capturing the response of controllable building loads. Building-specific load forecasting techniques are developed, with particular focus paid to the integration of building management system (BMS) information. These approaches are tested using Drexel University building data. The application of building-specific load forecasts and dynamic load modeling to the optimal scheduling of multi-building systems in the energy market is proposed. Sources of potential load uncertainty are introduced in the proposed energy management problem formulation in order to investigate the impact on the resulting load schedule.

Conditions inside fisher dens during prescribed fires; what is the risk posed by spring underburns?

Treesearch

Craig M. Thompson; Kathryn L. Purcell

2016-01-01

The use of spring prescribed fires to reduce accumulated fuel loads in western forests and facilitate the return of natural fire regimes is a controversial topic. While spring burns can be effective at reducing fuel loads and restoring heterogeneous landscapes, concerns exist over the potential impacts of unnaturally-timed fires to native species. To protect native...

The Economics of Applying Suppressive Shielding to the M483A1 Improved Conventional Munition Loading, Assembling, and Packing Facility

DTIC Science & Technology

1977-01-01

trays are placed on a cart (206-pound net explosive). These carts are moved by driverless tractor to an 8-hour hold in a nearby building while quality...by driverless tractor to a 40-hour hold for quality assurance inspection. After inspection, the grenades are returned to the loading, assembling, and

Variable-frequency inverter controls torque, speed, and braking in ac induction motors

NASA Technical Reports Server (NTRS)

Nola, F. J.

1974-01-01

Dc to ac inverter provides optimum frequency and voltage to ac induction motor, in response to different motor-load and speed requirements. Inverter varies slip frequency of motor in proportion to required torque. Inverter protects motor from high current surges, controls negative slip to apply braking, and returns energy stored in momentum of load to dc power source.

Beef quality attributes: A systematic review of consumer perspectives.

PubMed

Henchion, Maeve M; McCarthy, Mary; Resconi, Virginia C

2017-06-01

Informed by quality theory, this systematic literature review seeks to determine the relative importance of beef quality attributes from a consumer perspective, considering search, experience and credence quality attributes. While little change is anticipated in consumer ranking of search and experience attributes in the future, movement is expected in terms of ranking within the credence category and also in terms of the ranking of credence attributes overall. This highlights an opportunity for quality assurance schemes (QAS) to become more consumer focused through including a wider range of credence attributes. To capitalise on this opportunity, the meat industry should actively anticipate new relevant credence attributes and researchers need to develop new or better methods to measure them. This review attempts to identify the most relevant quality attributes in beef that may be considered in future iterations of QAS, to increase consumer satisfaction and, potentially, to increase returns to industry. Copyright © 2017 Elsevier Ltd. All rights reserved.

A new framing approach in guideline development to manage different sources of knowledge.

PubMed

Lukersmith, Sue; Hopman, Katherine; Vine, Kristina; Krahe, Lee; McColl, Alexander

2017-02-01

Contemporary guideline methodology struggles to consider context and information from different sources of knowledge besides quantitative research. Return to work programmes involve multiple components and stakeholders. If the guideline is to be relevant and practical for a complex intervention such as return to work, it is essential to use broad sources of knowledge. This paper reports on a new method in guideline development to manage different sources of knowledge. The method used framing for the return-to-work guidance within the Clinical Practice Guidelines for the Management of Rotator Cuff Syndrome in the Workplace. The development involved was a multi-disciplinary working party of experts including consumers. The researchers considered a broad range of research, expert (practice and experience) knowledge, the individual's and workplace contexts, and used framing with the International Classification of Functioning, Disability and Health. Following a systematic database search on four clinical questions, there were seven stages of knowledge management to extract, unpack, map and pack information to the ICF domains framework. Companion graded recommendations were developed. The results include practical examples, user and consumer guides, flow charts and six graded or consensus recommendations on best practice for return to work intervention. Our findings suggest using framing in guideline methodology with internationally accepted frames such as the ICF is a reliable and transparent framework to manage different sources of knowledge. Future research might examine other examples and methods for managing complexity and using different sources of knowledge in guideline development. © 2016 John Wiley & Sons, Ltd.

Full-scale phosphorus recovery from digested waste water sludge in Belgium - part I: technical achievements and challenges.

PubMed

Marchi, A; Geerts, S; Weemaes, M; Schiettecatte, W; Wim, S; Vanhoof, C; Christine, V

2015-01-01

To date, phosphorus recovery as struvite in wastewater treatment plants has been mainly implemented on water phases resulting from dewatering processes of the sludge line. However, it is possible to recover struvite directly from sludge phases. Besides minimising the return loads of phosphorus from the sludge line to the water line, placing such a process within the sludge line is claimed to offer advantages such as a higher recovery potential, enhanced dewaterability of the treated sludge, and reduced speed of scaling in pipes and dewatering devices. In the wastewater treatment plant at Leuven (Belgium), a full-scale struvite recovery process from digested sludge has been tested for 1 year. Several monitoring campaigns and experiments provided indications of the efficiency of the process for recovery. The load of phosphorus from the sludge line returning to the water line as centrate accounted for 15% of the P-load of the plant in the reference situation. Data indicated that the process divides this phosphorus load by two. An improved dewaterability of 1.5% of dry solids content was achieved, provided a proper tuning of the installation. Quality analyses showed that the formed struvite was quite pure.

Demand response-enabled model predictive HVAC load control in buildings using real-time electricity pricing

NASA Astrophysics Data System (ADS)

Avci, Mesut

A practical cost and energy efficient model predictive control (MPC) strategy is proposed for HVAC load control under dynamic real-time electricity pricing. The MPC strategy is built based on a proposed model that jointly minimizes the total energy consumption and hence, cost of electricity for the user, and the deviation of the inside temperature from the consumer's preference. An algorithm that assigns temperature set-points (reference temperatures) to price ranges based on the consumer's discomfort tolerance index is developed. A practical parameter prediction model is also designed for mapping between the HVAC load and the inside temperature. The prediction model and the produced temperature set-points are integrated as inputs into the MPC controller, which is then used to generate signal actions for the AC unit. To investigate and demonstrate the effectiveness of the proposed approach, a simulation based experimental analysis is presented using real-life pricing data. An actual prototype for the proposed HVAC load control strategy is then built and a series of prototype experiments are conducted similar to the simulation studies. The experiments reveal that the MPC strategy can lead to significant reductions in overall energy consumption and cost savings for the consumer. Results suggest that by providing an efficient response strategy for the consumers, the proposed MPC strategy can enable the utility providers to adopt efficient demand management policies using real-time pricing. Finally, a cost-benefit analysis is performed to display the economic feasibility of implementing such a controller as part of a building energy management system, and the payback period is identified considering cost of prototype build and cost savings to help the adoption of this controller in the building HVAC control industry.

Risk management considerations and the pregnancy handheld record. An audit of the return rate of the pregnancy handheld record.

PubMed

Toohill, Jocelyn; Soong, Barbara; Meldrum, Melissa

2006-12-01

Risk management is integral to the provision of contemporary health care. As maternity practices change and with a commitment on women being at the centre of care, one strategy has been for women to retain their records during the antenatal period. This paper explores the return rate of the pregnancy handheld record in a major tertiary facility and discusses the risk management implications when the record is not available upon presentation to the treating practitioner. Four audits were conducted over a 2 year period to determine the return rate of the pregnancy handheld record at time of admission for labour and birth. A total of 1096 records were returned out of a possible 1256 during the study. A 6.6% increase in the return rate was achieved over the 4 audit periods (82-88.5%) with an overall return rate of 85%. Our audit highlights the need for consumers, clinicians and heath care facilities to consider the advantages and disadvantages of the pregnancy handheld record, as well as the medico-legal responsibilities that ultimately fall back on the health facility.

Design and Certification of the Extravehicular Activity Mobility Unit (EMU) Water Processing Jumper

NASA Technical Reports Server (NTRS)

Peterson, Laurie J.; Neumeyer, Derek J.; Lewis, John F.

2006-01-01

The Extravehicular Mobility Units (EMUs) onboard the International Space Station (ISS) experienced a failure due to cooling water contamination from biomass and corrosion byproducts forming solids around the EMU pump rotor. The coolant had no biocide and a low pH which induced biofilm growth and corrosion precipitates, respectively. NASA JSC was tasked with building hardware to clean the ionic, organic, and particulate load from the EMU coolant loop before and after Extravehicular Activity (EVAs). Based on a return sample of the EMU coolant loop, the chemical load was well understood, but there was not sufficient volume of the returned sample to analyze particulates. Through work with EMU specialists, chemists, (EVA) Mission Operations Directorate (MOD) representation, safety and mission assurance, astronaut crew, and team engineers, requirements were developed for the EMU Water Processing hardware (sometimes referred to as the Airlock Coolant Loop Recovery [A/L CLR] system). Those requirements ranged from the operable level of ionic, organic, and particulate load, interfaces to the EMU, maximum cycle time, operating pressure drop, flow rate, and temperature, leakage rates, and biocide levels for storage. Design work began in February 2005 and certification was completed in April 2005 to support a return to flight launch date of May 12, 2005. This paper will discuss the details of the design and certification of the EMU Water Processing hardware and its components

Return to competition after an Achilles tendon rupture using both on and off the field load monitoring as guidance: A case report of a top-level soccer player.

PubMed

Fanchini, Maurizio; Impellizzeri, Franco M; Silbernagel, Karin Grävare; Combi, Franco; Benazzo, Franco; Bizzini, Mario

2018-01-01

To describe the Return to competition after Achilles Tendon rupture (ATR) in an elite soccer player. Case report. Return to sport (RTS) of a professional soccer player who suffered an ATR during a match. The RTS phase started 15 weeks after surgery and specific on-field activities were gradually introduced. Criteria used to monitor the transition through the different phases were strength and endurance of the calf muscle and ability to sustain specific on-field training loads (TL) monitored with Global Positioning System and heart-rate system. TLs were weekly compared to pre-injury values to evaluate recovery and to prescribe future sessions. A 39-year-old (height 178 cm, weight 75 kg) elite soccer defender player, playing in Italian Serie-A league. Days of absence were lower compared to a cohort presented in UEFA study (119 versus 161 ± 65 days, respectively). External-TL and Internal-TL were organized to gradually increase during RTS and resulted in higher values prior to return to competition compared to pre-injury values. Concentric plantar flexion peak torque increased till 9th months after surgery. Monitoring of the field activities allowed comparison with pre-injury values and provided a useful and functional criteria to pass return to team activity and competition. Copyright © 2017 Elsevier Ltd. All rights reserved.

16 CFR 424.2 - Defenses.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., common sense tells us that in the highly competitive grocery store business, where consumers return week... Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES RETAIL FOOD STORE ADVERTISING AND MARKETING... decision today to amend the Retail Food Store Advertising and Marketing Practices Trade Regulation Rule...

16 CFR 424.2 - Defenses.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., common sense tells us that in the highly competitive grocery store business, where consumers return week... Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES RETAIL FOOD STORE ADVERTISING AND MARKETING... decision today to amend the Retail Food Store Advertising and Marketing Practices Trade Regulation Rule...

16 CFR 424.2 - Defenses.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., common sense tells us that in the highly competitive grocery store business, where consumers return week... Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES RETAIL FOOD STORE ADVERTISING AND MARKETING... decision today to amend the Retail Food Store Advertising and Marketing Practices Trade Regulation Rule...

16 CFR 424.2 - Defenses.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., common sense tells us that in the highly competitive grocery store business, where consumers return week... Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES RETAIL FOOD STORE ADVERTISING AND MARKETING... decision today to amend the Retail Food Store Advertising and Marketing Practices Trade Regulation Rule...

Systems and methods for providing power to a load based upon a control strategy

DOEpatents

Perisic, Milun; Lawrence, Christopher P; Ransom, Ray M; Kajouke, Lateef A

2014-11-04

Systems and methods are provided for an electrical system. The electrical system, for example, includes a first load, an interface configured to receive a voltage from a voltage source, and a controller configured to receive the voltage through the interface and to provide a voltage and current to the first load. The controller may be further configured to, receive information on a second load electrically connected to the voltage source, determine an amount of reactive current to return to the voltage source such that a current drawn by the electrical system and the second load from the voltage source is substantially real, and provide the determined reactive current to the voltage source.

Interpreting the g loadings of intelligence test composite scores in light of Spearman's law of diminishing returns.

PubMed

Reynolds, Matthew R

2013-03-01

The linear loadings of intelligence test composite scores on a general factor (g) have been investigated recently in factor analytic studies. Spearman's law of diminishing returns (SLODR), however, implies that the g loadings of test scores likely decrease in magnitude as g increases, or they are nonlinear. The purpose of this study was to (a) investigate whether the g loadings of composite scores from the Differential Ability Scales (2nd ed.) (DAS-II, C. D. Elliott, 2007a, Differential Ability Scales (2nd ed.). San Antonio, TX: Pearson) were nonlinear and (b) if they were nonlinear, to compare them with linear g loadings to demonstrate how SLODR alters the interpretation of these loadings. Linear and nonlinear confirmatory factor analysis (CFA) models were used to model Nonverbal Reasoning, Verbal Ability, Visual Spatial Ability, Working Memory, and Processing Speed composite scores in four age groups (5-6, 7-8, 9-13, and 14-17) from the DAS-II norming sample. The nonlinear CFA models provided better fit to the data than did the linear models. In support of SLODR, estimates obtained from the nonlinear CFAs indicated that g loadings decreased as g level increased. The nonlinear portion for the nonverbal reasoning loading, however, was not statistically significant across the age groups. Knowledge of general ability level informs composite score interpretation because g is less likely to produce differences, or is measured less, in those scores at higher g levels. One implication is that it may be more important to examine the pattern of specific abilities at higher general ability levels. PsycINFO Database Record (c) 2013 APA, all rights reserved.

Effects of a pre-workout supplement on hyperemia following leg extension resistance exercise to failure with different resistance loads.

PubMed

Martin, Jeffrey S; Mumford, Petey W; Haun, Cody T; Luera, Micheal J; Muddle, Tyler W D; Colquhoun, Ryan J; Feeney, Mary P; Mackey, Cameron S; Roberson, Paul A; Young, Kaelin C; Pascoe, David D; DeFreitas, Jason M; Jenkins, Nathaniel D M; Roberts, Michael D

2017-01-01

We sought to determine if a pre-workout supplement (PWS), containing multiple ingredients thought to enhance blood flow, increases hyperemia associated with resistance training compared to placebo (PBO). Given the potential interaction with training loads/time-under-tension, we evaluated the hyperemic response at two different loads to failure. Thirty males participated in this double-blinded study. At visit 1, participants were randomly assigned to consume PWS (Reckless™) or PBO (maltodextrin and glycine) and performed four sets of leg extensions to failure at 30% or 80% of their 1-RM 45-min thereafter. 1-wk. later (visit 2), participants consumed the same supplement as before, but exercised at the alternate load. Heart rate (HR), blood pressure (BP), femoral artery blood flow, and plasma nitrate/nitrite (NOx) were assessed at baseline (BL), 45-min post-PWS/PBO consumption (PRE), and 5-min following the last set of leg extensions (POST). Vastus lateralis near infrared spectroscopy (NIRS) was employed during leg extension exercise. Repeated measures ANOVAs were performed with time, supplement, and load as independent variables and Bonferroni correction applied for multiple post-hoc comparisons. Data are reported as mean ± SD. With the 30% training load compared to 80%, significantly more repetitions were performed ( p  < 0.05), but there was no difference in total volume load ( p  > 0.05). NIRS derived minimum oxygenated hemoglobin (O 2 Hb) was lower in the 80% load condition compared to 30% for all rest intervals between sets of exercise ( p  < 0.0167). HR and BP did not vary as a function of supplement or load. Femoral artery blood flow at POST was higher independent of exercise load and treatment. However, a time*supplement*load interaction was observed revealing greater femoral artery blood flow with PWS compared to PBO at POST in the 80% (+56.8%; p  = 0.006) but not 30% load condition (+12.7%; p  = 0.476). Plasma NOx was ~3-fold higher with PWS compared to PBO at PRE and POST ( p  < 0.001). Compared to PBO, the PWS consumed herein augmented hyperemia following multiple sets to failure at 80% of 1-RM, but not 30%. This specificity may be a product of interaction with local perturbations (e.g., reduced tissue oxygenation levels [minimum O 2 Hb] in the 80% load condition) and/or muscle fiber recruitment.

An application of extreme value theory to the management of a hydroelectric dam.

PubMed

Minkah, Richard

2016-01-01

Assessing the probability of very low or high water levels is an important issue in the management of hydroelectric dams. In the case of the Akosombo dam, very low and high water levels result in load shedding of electrical power and flooding in communities downstream respectively. In this paper, we use extreme value theory to estimate the probability and return period of very low water levels that can result in load shedding or a complete shutdown of the dam's operations. In addition, we assess the probability and return period of high water levels near the height of the dam and beyond. This provides a framework for a possible extension of the dam to sustain the generation of electrical power and reduce the frequency of spillage that causes flooding in communities downstream. The results show that an extension of the dam can reduce the probability and prolong the return period of a flood. In addition, we found a negligible probability of a complete shutdown of the dam due to inadequate water level.

Consumer satisfaction with the Child and Adolescent Mental Health Service and its association with treatment outcome: a 3-4-year follow-up study.

PubMed

Solberg, Cathrine; Larsson, Bo; Jozefiak, Thomas

2015-04-01

Consumer satisfaction studies with the Child and Adolescent Mental Health Service (CAMHS) have mainly assessed evaluations in a short-term follow-up perspective. Adolescent reports with CAMHS have not been included nationally. The purposes of this study were to explore adolescent and parental satisfaction with the CAMHS in a 3-4-year follow-up perspective, and to examine the relationships between reported consumer satisfaction and clinical parameters such as reason for adolescent referral, emotional/behavioral symptoms and treatment outcome. Of 190 adolescent-parent pairs in a sample of CAMHS outpatients, 120 completed a Consumer Satisfaction Questionnaire. Parents assessed adolescent emotional/behavior problems both at baseline and at follow-up by completing the Child Behavior Checklist (CBCL). Correlations were examined between adolescent and parental evaluations. The relationships between service satisfaction and symptom load at baseline and follow-up and treatment outcome at follow-up were explored. Overall, adolescents and parents were satisfied with the services received from the CAMHS. The correlations between adolescent and parent consumer satisfaction ratings were low to moderate. Consumer satisfaction was significantly and negatively correlated with symptom load on the CBCL Total Problems scores at baseline, but not at follow-up. There was no difference in satisfaction levels between those who improved after treatment and those who did not. Given the differences in informant ratings of consumer satisfaction, it is important to include both adolescent and parental perceptions in evaluations of CAMHS services and treatment outcomes. Consumer satisfaction should serve as a supplement to established standardized outcome measures.

Real-time volume rendering of 4D image using 3D texture mapping

NASA Astrophysics Data System (ADS)

Hwang, Jinwoo; Kim, June-Sic; Kim, Jae Seok; Kim, In Young; Kim, Sun Il

2001-05-01

Four dimensional image is 3D volume data that varies with time. It is used to express deforming or moving object in virtual surgery of 4D ultrasound. It is difficult to render 4D image by conventional ray-casting or shear-warp factorization methods because of their time-consuming rendering time or pre-processing stage whenever the volume data are changed. Even 3D texture mapping is used, repeated volume loading is also time-consuming in 4D image rendering. In this study, we propose a method to reduce data loading time using coherence between currently loaded volume and previously loaded volume in order to achieve real time rendering based on 3D texture mapping. Volume data are divided into small bricks and each brick being loaded is tested for similarity to one which was already loaded in memory. If the brick passed the test, it is defined as 3D texture by OpenGL functions. Later, the texture slices of the brick are mapped into polygons and blended by OpenGL blending functions. All bricks undergo this test. Continuously deforming fifty volumes are rendered in interactive time with SGI ONYX. Real-time volume rendering based on 3D texture mapping is currently available on PC.

Simplified Load-Following Control for a Fuel Cell System

NASA Technical Reports Server (NTRS)

Vasquez, Arturo

2010-01-01

A simplified load-following control scheme has been proposed for a fuel cell power system. The scheme could be used to control devices that are important parts of a fuel cell system but are sometimes characterized as parasitic because they consume some of the power generated by the fuel cells.

40 CFR 92.107 - Fuel flow measurement.

Code of Federal Regulations, 2014 CFR

2014-07-01

.... (iii) If the mass of fuel consumed is measured electronically (load cell, load beam, etc.), the error... 40 Protection of Environment 20 2014-07-01 2013-07-01 true Fuel flow measurement. 92.107 Section...) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Test Procedures § 92.107 Fuel flow...

40 CFR 92.107 - Fuel flow measurement.

Code of Federal Regulations, 2013 CFR

2013-07-01

.... (iii) If the mass of fuel consumed is measured electronically (load cell, load beam, etc.), the error... 40 Protection of Environment 21 2013-07-01 2013-07-01 false Fuel flow measurement. 92.107 Section...) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Test Procedures § 92.107 Fuel flow...

40 CFR 92.107 - Fuel flow measurement.

Code of Federal Regulations, 2010 CFR

2010-07-01

.... (iii) If the mass of fuel consumed is measured electronically (load cell, load beam, etc.), the error... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Fuel flow measurement. 92.107 Section...) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Test Procedures § 92.107 Fuel flow...

40 CFR 92.107 - Fuel flow measurement.

Code of Federal Regulations, 2011 CFR

2011-07-01

.... (iii) If the mass of fuel consumed is measured electronically (load cell, load beam, etc.), the error... 40 Protection of Environment 20 2011-07-01 2011-07-01 false Fuel flow measurement. 92.107 Section...) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Test Procedures § 92.107 Fuel flow...

40 CFR 92.107 - Fuel flow measurement.

Code of Federal Regulations, 2012 CFR

2012-07-01

.... (iii) If the mass of fuel consumed is measured electronically (load cell, load beam, etc.), the error... 40 Protection of Environment 21 2012-07-01 2012-07-01 false Fuel flow measurement. 92.107 Section...) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Test Procedures § 92.107 Fuel flow...

Carbohydrate Loading.

ERIC Educational Resources Information Center

Csernus, Marilyn

Carbohydrate loading is a frequently used technique to improve performance by altering an athlete's diet. The objective is to increase glycogen stored in muscles for use in prolonged strenuous exercise. For two to three days, the athlete consumes a diet that is low in carbohydrates and high in fat and protein while continuing to exercise and…

Connecting cognition and consumer choice.

PubMed

Bartels, Daniel M; Johnson, Eric J

2015-02-01

We describe what can be gained from connecting cognition and consumer choice by discussing two contexts ripe for interaction between the two fields. The first-context effects on choice-has already been addressed by cognitive science yielding insights about cognitive process but there is promise for more interaction. The second is learning and representation in choice where relevant theories in cognitive science could be informed by consumer choice, and in return, could pose and answer new questions. We conclude by discussing how these two fields of research stand to benefit from more interaction, citing examples of how interfaces of cognitive science with other fields have been illuminating for theories of cognition. Copyright © 2014 Elsevier B.V. All rights reserved.

77 FR 33106 - Energy Conservation Program: Test Procedure for Microwave Ovens

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-05

... due to the different masses and shapes of the potatoes. DOE observed, similar to the tests for... consumer use, (2) the repeatability of energy use measurements using different food loads, and (3) consumer... ``normal usage'' and the water temperature rise of 50 degrees Celsius ([deg]C) achieves eating temperature...

Novel Musculoskeletal Loading and Assessment System

NASA Technical Reports Server (NTRS)

Downs, Meghan E.

2017-01-01

Ground based and ISS (International Space Station) exercise research have shown that axial loading via two-point loading at the shoulders and load quality (i.e. consistent load and at least 1:1 concentric to eccentric ratio) are extremely important to optimize musculoskeletal adaptations to resistance exercise. The Advanced Resistance Exercise Device (ARED) is on ISS now and is the "state of the art" for resistance exercise capabilities in microgravity; however, the ARED is far too large and power consuming for exploration vehicles. The single cable exercise device design selected for MPCV (Multi-Purpose Crew Vehicle), does not readily allow for the two-point loading at the shoulders.

The value of supply chain coordination under moral hazard: A case study of the consumer product supply chain

PubMed Central

Lee, Yumi; Song, Sang Hwa

2018-01-01

In this paper, we examine a real-world case related to the consumer product supply chain to analyze the value of supply chain coordination under the condition of moral hazard. Because of the characteristics of a buyback contract scheme employed in the supply chain, the supplier company’s sales department encourages retailers to order more inventory to meet their sales target, whereas retailers pay less attention to their inventory level and leftovers at the end of the season. This condition induces moral hazard problems in the operation of the supply chain, as suppliers suffer from huge returns of leftover inventory. This, in turn, is related to the obsolescence of returned inventory, even with penalty terms in the contract for the return of any leftovers. In this study, we show under the current buyback-based supply chain operation, the inventory levels of both the supplier and retailers exceed customer demand and develop vendor-managed inventory (VMI) system with base stock policy to remove any mismatch of supply and demand. A comparison of both systems shows that through the proper coordination of supply chain operations, both suppliers and retailers can gain additional benefits while providing proper services to end customers. PMID:29547625

Consumer Response to Gastrointestinal Illness Perceived To Originate from Food Service Facilities.

PubMed

Garnett, Erin S; Gretsch, Stephanie R; Null, Clair; Moe, Christine L

2016-10-01

Consumer responses to food product recalls have been documented, but there is little information on how consumers respond to illnesses or outbreaks associated with food service facilities. This study uses an on-line survey of 885 adults conducted in 2012 to determine how respondents changed their dining behavior following personal experiences with and secondhand reports of gastrointestinal illness believed to be associated with food service facilities. In response to personally experiencing gastrointestinal illness that they attributed to a food service facility, 90% of survey participants reported that they avoided the implicated facility for a time following the incident; almost one-half decided to never return to the facility they believed had made them ill. In response to a secondhand report of gastrointestinal illness, 86% of respondents reported they would avoid the implicated facility for a time, and 22% said they would never return to the facility. After both personal experiences of illness and secondhand reports of illness, consumer responses were significantly more severe toward the implicated facility than toward all other food service facilities. Frequent diners avoided facilities for shorter periods of time and were less likely to never go back to a facility than were infrequent diners. The survey results indicate that 24 to 97 fewer meals were purchased per respondent, or a 11 to 20% reduction in meals purchased outside the home, in the year following respondents' illness. Future estimates of the economic burden of foodborne illnesses, including those caused by noroviruses, should consider the impacts on the food service industry attributable to changes in consumer behavior, in addition to health care costs and loss of productivity.

Demand side management in recycling and electricity retail pricing

NASA Astrophysics Data System (ADS)

Kazan, Osman

This dissertation addresses several problems from the recycling industry and electricity retail market. The first paper addresses a real-life scheduling problem faced by a national industrial recycling company. Based on their practices, a scheduling problem is defined, modeled, analyzed, and a solution is approximated efficiently. The recommended application is tested on the real-life data and randomly generated data. The scheduling improvements and the financial benefits are presented. The second problem is from electricity retail market. There are well-known patterns in daily usage in hours. These patterns change in shape and magnitude by seasons and days of the week. Generation costs are multiple times higher during the peak hours of the day. Yet most consumers purchase electricity at flat rates. This work explores analytic pricing tools to reduce peak load electricity demand for retailers. For that purpose, a nonlinear model that determines optimal hourly prices is established based on two major components: unit generation costs and consumers' utility. Both are analyzed and estimated empirically in the third paper. A pricing model is introduced to maximize the electric retailer's profit. As a result, a closed-form expression for the optimal price vector is obtained. Possible scenarios are evaluated for consumers' utility distribution. For the general case, we provide a numerical solution methodology to obtain the optimal pricing scheme. The models recommended are tested under various scenarios that consider consumer segmentation and multiple pricing policies. The recommended model reduces the peak load significantly in most cases. Several utility companies offer hourly pricing to their customers. They determine prices using historical data of unit electricity cost over time. In this dissertation we develop a nonlinear model that determines optimal hourly prices with parameter estimation. The last paper includes a regression analysis of the unit generation cost function obtained from Independent Service Operators. A consumer experiment is established to replicate the peak load behavior. As a result, consumers' utility function is estimated and optimal retail electricity prices are computed.

Consumer health information seeking in social media: a literature review.

PubMed

Zhao, Yuehua; Zhang, Jin

2017-12-01

The objective of this literature review was to summarise current research regarding how consumers seek health-related information from social media. Primarily, we hope to reveal characteristics of existing studies investigating the health topics that consumers have discussed in social media, ascertaining the roles social media have played in consumers' information-seeking processes and discussing the potential benefits and concerns of accessing consumer health information in social media. The Web of Science Core Collection database was searched for existing literature on consumer health information seeking in social media. The search returned 214 articles, of which 21 met the eligibility criteria following review of full-text documents. Between 2011 and 2016, twenty-one studies published explored various topics related to consumer information seeking in social media. These ranged from online discussions on specific diseases (e.g. diabetes) to public health concerns (e.g. pesticide residues). Consumers' information needs vary depending on the health issues of interest. Benefits of health seeking on social media, in addition to filling a need for health information, include the social and emotional support health consumers gain from peer-to-peer interactions. These benefits, however, are tempered by concerns of information quality and authority and lead to decreased consumer engagement. © 2017 Health Libraries Group.

The market of electrical and electronic equipment waste in Portugal: Analysis of take-back consumers' decisions.

PubMed

Botelho, Anabela; Ferreira Dias, Marta; Ferreira, Carla; Pinto, Lígia M Costa

2016-10-01

This paper aims to ascertain the efficacy and acceptability of five incentive schemes for the take-back of waste electrical and electronic equipment in Portugal, focusing in consumers' perspectives. It assesses users' perception of these items, evaluating the motivations and interests they have concerning the market of waste electrical and electronic equipment. Results indicate, on one hand, a lack of awareness by consumers about the process of take-back of their equipment. On the other hand, results show that information conditions and socio-demographic factors affect consumers' motivations for returning the electrical and electronic equipment at the end of life. In this context, it can be concluded that, in Portugal, the market for the recovery of waste electrical and electronic equipment is still in its infancy. © The Author(s) 2016.

ADESSA: A Real-Time Decision Support Service for Delivery of Semantically Coded Adverse Drug Event Data

PubMed Central

Duke, Jon D.; Friedlin, Jeff

2010-01-01

Evaluating medications for potential adverse events is a time-consuming process, typically involving manual lookup of information by physicians. This process can be expedited by CDS systems that support dynamic retrieval and filtering of adverse drug events (ADE’s), but such systems require a source of semantically-coded ADE data. We created a two-component system that addresses this need. First we created a natural language processing application which extracts adverse events from Structured Product Labels and generates a standardized ADE knowledge base. We then built a decision support service that consumes a Continuity of Care Document and returns a list of patient-specific ADE’s. Our database currently contains 534,125 ADE’s from 5602 product labels. An NLP evaluation of 9529 ADE’s showed recall of 93% and precision of 95%. On a trial set of 30 CCD’s, the system provided adverse event data for 88% of drugs and returned these results in an average of 620ms. PMID:21346964

46 CFR 42.20-9 - Initial conditions of loading.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) Fifty percent of the total capacity of all tanks and spaces fitted to contain consumable liquids or stores must be assumed to be distributed to accomplish the following: (i) Each tank and space fitted to... only partially filled. In the case of liquid cargoes, fully loaded means 98 percent full. (3) If the...

46 CFR 42.20-9 - Initial conditions of loading.

Code of Federal Regulations, 2012 CFR

2012-10-01

...) Fifty percent of the total capacity of all tanks and spaces fitted to contain consumable liquids or stores must be assumed to be distributed to accomplish the following: (i) Each tank and space fitted to... only partially filled. In the case of liquid cargoes, fully loaded means 98 percent full. (3) If the...

46 CFR 42.20-9 - Initial conditions of loading.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) Fifty percent of the total capacity of all tanks and spaces fitted to contain consumable liquids or stores must be assumed to be distributed to accomplish the following: (i) Each tank and space fitted to... only partially filled. In the case of liquid cargoes, fully loaded means 98 percent full. (3) If the...

46 CFR 42.20-9 - Initial conditions of loading.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) Fifty percent of the total capacity of all tanks and spaces fitted to contain consumable liquids or stores must be assumed to be distributed to accomplish the following: (i) Each tank and space fitted to... only partially filled. In the case of liquid cargoes, fully loaded means 98 percent full. (3) If the...

46 CFR 42.20-9 - Initial conditions of loading.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) Fifty percent of the total capacity of all tanks and spaces fitted to contain consumable liquids or stores must be assumed to be distributed to accomplish the following: (i) Each tank and space fitted to... only partially filled. In the case of liquid cargoes, fully loaded means 98 percent full. (3) If the...

The substorm loading-unloading cycle as reproduced by community-available global MHD magnetospheric models

NASA Astrophysics Data System (ADS)

Gordeev, Evgeny; Sergeev, Victor; Tsyganenko, Nikolay; Kuznetsova, Maria; Rastaetter, Lutz; Raeder, Joachim; Toth, Gabor; Lyon, John; Merkin, Vyacheslav; Wiltberger, Michael

2017-04-01

In this study we investigate how well the three community-available global MHD models, supported by the Community Coordinated Modeling Center (CCMC NASA), reproduce the global magnetospheric dynamics, including the loading-unloading substorm cycle. We found that in terms of global magnetic flux transport CCMC models display systematically different response to idealized 2-hour north then 2-hour south IMF Bz variation. The LFM model shows a depressed return convection in the tail plasma sheet and high rate of magnetic flux loading into the lobes during the growth phase, as well as enhanced return convection and high unloading rate during the expansion phase, with the amount of loaded/unloaded magnetotail flux and the growth phase duration being the closest to their observed empirical values during isolated substorms. BATSRUS and Open GGCM models exhibit drastically different behavior. In the BATS-R-US model the plasma sheet convection shows a smooth transition to the steady convection regime after the IMF southward turning. In the Open GGCM a weak plasma sheet convection has comparable intensities during both the growth phase and the following slow unloading phase. Our study shows that different CCMC models under the same solar wind conditions (north to south IMF variation) produce essentially different solutions in terms of global magnetospheric convection.

Consumer-mediated recycling and cascading trophic interactions.

PubMed

Leroux, Shawn J; Loreau, Michel

2010-07-01

Cascading trophic interactions mediated by consumers are complex phenomena, which encompass many direct and indirect effects. Nonetheless, most experiments and theory on the topic focus uniquely on the indirect, positive effects of predators on producers via regulation of herbivores. Empirical research in aquatic ecosystems, however, demonstrate that the indirect, positive effects of consumer-mediated recycling on primary producer stocks may be larger than the effects of herbivore regulation, particularly when predators have access to alternative prey. We derive an ecosystem model with both recipient- and donor-controlled trophic relationships to test the conditions of four hypotheses generated from recent empirical work on the role of consumer-mediated recycling in cascading trophic interactions. Our model predicts that predator regulation of herbivores will have larger, positive effects on producers than consumer-mediated recycling in most cases but that consumer-mediated recycling does generally have a positive effect on producer stocks. We demonstrate that herbivore recycling will have larger effects on producer biomass than predator recycling when turnover rates and recycling efficiencies are high and predators prefer local prey. In addition, predictions suggest that consumer-mediated recycling has the largest effects on primary producers when predators prefer allochthonous prey and predator attack rates are high. Finally, our model predicts that consumer-mediated recycling effects may not be largest when external nutrient loading is low. Our model predictions highlight predator and prey feeding relationships, turnover rates, and external nutrient loading rates as key determinants of the strength of cascading trophic interactions. We show that existing hypotheses from specific empirical systems do not occur under all conditions, which further exacerbates the need to consider a broad suite of mechanisms when investigating trophic cascades.

Can online consumers contribute to drug knowledge? A mixed-methods comparison of consumer-generated and professionally controlled psychotropic medication information on the internet.

PubMed

Hughes, Shannon; Cohen, David

2011-07-29

Ongoing initiatives to filter online health searches exclude consumer-generated content from search returns, though its inferiority compared with professionally controlled content is not demonstrated. The antidepressant escitalopram and the antipsychotic quetiapine have ranked over the last 5 years as top-selling agents in their respective drug classes. Both drugs have various off-label mental health and non-mental health uses, ranging from the relief of insomnia and migraines to the treatment of severe developmental disorders. Our objective was to describe the most frequently reported effects of escitalopram and quetiapine in online consumer reviews, to compare them with effects described in professionally controlled commercial health websites, and to gauge the usability of online consumer medication reviews. A stratified simple random sample of 960 consumer reviews was selected from all 6998 consumer reviews of the two drugs in 2 consumer-generated (www.askapatient.com and www.crazymeds.us) and 2 professionally controlled (www.webmd.com and www.revolutionhealth.com) health websites. Professional medication descriptions included all standard information on the medications from the latter 2 websites. All textual data were inductively coded for medication effects, and intercoder agreement was assessed. Chi-square was used to test for associations between consumer-reported effects and website origination. Consumers taking either escitalopram (n = 480) or quetiapine (n = 480) most frequently reported symptom improvement (30.4% or 146/480, 24.8% or 119/480) or symptom worsening (15.8% or 76/480, 10.2% or 49/480), changes in sleep (36% or 173/480, 60.6% or 291/480) and changes in weight and appetite (22.5% or 108/480, 30.8% or 148/480). More consumers posting reviews on consumer-generated rather than professionally controlled websites reported symptom worsening on quetiapine (17.3% or 38/220 versus 5% or 11/220, P < .001), while more consumers posting on professionally controlled websites reported symptom improvement (32.7% or 72/220 versus 21.4% or 47/220, P = .008). Professional descriptions more frequently listed physical adverse effects and warnings about suicidal ideation while consumer reviews emphasized effects disrupting daily routines and provided richer descriptions of effects in context. The most recent 20 consumer reviews on each drug from each website (n = 80) were comparable to the full sample of reviews in the frequency of commonly reported effects. Consumer reviews and professional medication descriptions generally reported similar effects of two psychotropic medications but differed in their descriptions and in frequency of reporting. Professional medication descriptions offer the advantage of a concise yet comprehensive listing of drug effects, while consumer reviews offer greater context and situational examples of how effects may manifest in various combinations and to varying degrees. The dispersion of consumer reviews across websites limits their integration, but a brief browsing strategy on the two target medications nonetheless retrieved representative consumer content. Current strategies for filtering online health searches to return only trusted or approved websites may inappropriately address the challenge to identify quality health sources on the Internet because such strategies unduly limit access to an entire complementary source for health information.

The effect of real-time pricing on load shifting in a highly renewable power system dominated by generation from the renewable sources of wind and photovoltaics

NASA Astrophysics Data System (ADS)

Kies, Alexander; Brown, Tom; Schlachtberger, David; Schramm, Stefan

2017-04-01

The supply-demand imbalance is a major concern in the presence of large shares of highly variable renewable generation from sources like wind and photovoltaics (PV) in power systems. Other than the measures on the generation side, such as flexible backup generation or energy storage, sector coupling or demand side management are the most likely option to counter imbalances, therefore to ease the integration of renewable generation. Demand side management usually refers to load shifting, which comprises the reaction of electricity consumers to price fluctuations. In this work, we derive a novel methodology to model the interplay of load shifting and provided incentives via real-time pricing in highly renewable power systems. We use weather data to simulate generation from the renewable sources of wind and photovoltaics, as well as historical load data, split into different consumption categories, such as, heating, cooling, domestic, etc., to model a simplified power system. Together with renewable power forecast data, a simple market model and approaches to incorporate sector coupling [1] and load shifting [2,3], we model the interplay of incentives and load shifting for different scenarios (e.g., in dependency of the risk-aversion of consumers or the forecast horizon) and demonstrate the practical benefits of load shifting. First, we introduce the novel methodology and compare it with existing approaches. Secondly, we show results of numerical simulations on the effects of load shifting: It supports the integration of PV power by providing a storage, which characteristics can be described as "daily" and provides a significant amount of balancing potential. Lastly, we propose an experimental setup to obtain empirical data on end-consumer load-shifting behaviour in response to price incentives. References [1] Brown, T., Schlachtberger, D., Kies. A., Greiner, M., Sector coupling in a highly renewable European energy system, Proc. of the 15th International Workshop on Large-Scale Integration of Wind Power into Power Systems as well as on Transmission Networks for Offshore Wind Power Plants, Vienna, Austria, 15.-17. November 2016 [2] Kleinhans, D.: Towards a systematic characterization of the potential of demand side management, arXiv preprint arXiv:1401.4121, 2014 [3] Kies, A., Schyska, B. U., von Bremen, L., The Demand Side Management Potential to Balance a Highly Renewable European Power System. Energies, 9(11), 955, 2016

Prompting a consumer behavior for pollution control1

PubMed Central

Geller, E. Scott; Farris, John C.; Post, David S.

1973-01-01

A field application of behavior modification studied the relative effectiveness of different prompting procedures for increasing the probability that customers entering a grocery store would select their soft drinks in returnable rather than nonreturnable containers. Six different 2-hr experimental conditions during which bottle purchases were recorded were (1) No Prompt (i.e., control), (2) one student gave incoming customers a handbill urging the purchase of soft drinks in returnable bottles, (3) distribution of the handbill by one student and public charting of each customer's bottle purchases by another student, (4) handbill distribution and charting by a five-member group, (5) handbills distributed and purchases charted by three females. The variant prompting techniques were equally effective, and in general increased the percentage of returnable-bottle customers by an average of 25%. PMID:16795418

Prompting a consumer behavior for pollution control.

PubMed

Geller, E S; Farris, J C; Post, D S

1973-01-01

A field application of behavior modification studied the relative effectiveness of different prompting procedures for increasing the probability that customers entering a grocery store would select their soft drinks in returnable rather than nonreturnable containers. Six different 2-hr experimental conditions during which bottle purchases were recorded were (1) No Prompt (i.e., control), (2) one student gave incoming customers a handbill urging the purchase of soft drinks in returnable bottles, (3) distribution of the handbill by one student and public charting of each customer's bottle purchases by another student, (4) handbill distribution and charting by a five-member group, (5) handbills distributed and purchases charted by three females. The variant prompting techniques were equally effective, and in general increased the percentage of returnable-bottle customers by an average of 25%.

Effective Presentation of Metabolic Rate Information for Lunar Extravehicular Activity (EVA)

NASA Technical Reports Server (NTRS)

Mackin, Michael A.; Gonia, Philip; Lombay-Gonzalez, Jose

2010-01-01

During human exploration of the lunar surface, a suited crewmember needs effective and accurate information about consumable levels remaining in their life support system. The information must be presented in a manner that supports real-time consumable monitoring and route planning. Since consumable usage is closely tied to metabolic rate, the lunar suit must estimate metabolic rate from life support sensors, such as oxygen tank pressures, carbon dioxide partial pressure, and cooling water inlet and outlet temperatures. To provide adequate warnings that account for traverse time for a crewmember to return to a safe haven, accurate forecasts of consumable depletion rates are required. The forecasts must be presented to the crewmember in a straightforward, effective manner. In order to evaluate methods for displaying consumable forecasts, a desktop-based simulation of a lunar Extravehicular Activity (EVA) has been developed for the Constellation lunar suite s life-support system. The program was used to compare the effectiveness of several different data presentation methods.

Electrically Small Folded Slot Antenna Utilizing Capacitive Loaded Slot Lines

NASA Technical Reports Server (NTRS)

Scardelletti, Maximilian C.; Ponchak, George E.; Merritt, Shane; Minor, John S.; Zorman, Christian A.

2007-01-01

This paper presents an electrically small, coplanar waveguide fed, folded slot antenna that uses capacitive loading. Several antennas are fabricated with and without capacitive loading to demonstrate the ability of this design approach to reduce the resonant frequency of the antenna, which is analogous to reducing the antenna size. The antennas are fabricated on Cu-clad Rogers Duriod(TM) 6006 with multilayer chip capacitors to load the antennas. Simulated and measured results show close agreement, thus, validating the approach. The electrically small antennas have a measured return loss greater than 15 dB and a gain of 5.4, 5.6, and 2.7 dBi at 4.3, 3.95, and 3.65 GHz, respectively.

Consumables and wastes estimations for the First Lunar Outpost

NASA Technical Reports Server (NTRS)

Theis, Ronald L. A.; Ballin, Mark G.; Evert, Martha F.

1992-01-01

The First Lunar Outpost mission is a design reference mission for the first human return to the moon. This paper describes a set of consumables and waste material estimations made on the basis of the First Lunar Outpost mission scenario developed by the NASA Exploration Programs Office. The study includes the definition of a functional interface framework and a top-level set of consumables and waste materials to be evaluated, the compilation of mass flow information from mission developers supplemented with information from the literature, and the analysis of the resulting mass flow information to gain insight about the possibility of material flow integration between the moon outpost elements. The results of the study of the details of the piloted mission and the habitat are used to identify areas where integration of consumables and wastes across different mission elements could provide possible launch mass savings.

Radiation preservation and test marketing of fruits and vegetables

NASA Astrophysics Data System (ADS)

Zhicheng, Xu; Dong, Cai; Fuying, He; Deyao, Zhao

1993-07-01

To develop the technology for radiation preservation of fruits and vegetables, many varieties of fruits and vegetables had been researched. Results showed that the low dose irradiation is useful to preservation of fruits and vegetables. On the besis of research, 1900 tons garlic, 950 tons onion, 500 tons potatoes, 710 tons apples and 1000 kg litchi had been irradiated in commercial scale. The quality control standards of irradiated garlic, onion and potato had been established and used for commercial scale irradiation. In order to collect consumers in store response to irradiated foods, a special counter was set up for selling irradiated apples in Nan Jing Road (W), Shanghai. 634 sheets of consumer in-store respense investigation forms have been returned and analysed. These results showed that when consumer understands the benefit of irradiation preservation such as higher quality, greater safety, longer shelf-live, wide product availability, or good prices for value, consumer would willingly buy irradiated food.

Quantifying learning in biotracer studies.

PubMed

Brown, Christopher J; Brett, Michael T; Adame, Maria Fernanda; Stewart-Koster, Ben; Bunn, Stuart E

2018-04-12

Mixing models have become requisite tools for analyzing biotracer data, most commonly stable isotope ratios, to infer dietary contributions of multiple sources to a consumer. However, Bayesian mixing models will always return a result that defaults to their priors if the data poorly resolve the source contributions, and thus, their interpretation requires caution. We describe an application of information theory to quantify how much has been learned about a consumer's diet from new biotracer data. We apply the approach to two example data sets. We find that variation in the isotope ratios of sources limits the precision of estimates for the consumer's diet, even with a large number of consumer samples. Thus, the approach which we describe is a type of power analysis that uses a priori simulations to find an optimal sample size. Biotracer data are fundamentally limited in their ability to discriminate consumer diets. We suggest that other types of data, such as gut content analysis, must be used as prior information in model fitting, to improve model learning about the consumer's diet. Information theory may also be used to identify optimal sampling protocols in situations where sampling of consumers is limited due to expense or ethical concerns.

Bone Density Following Three Years of Recovery from Long-Duration Space Flight

NASA Technical Reports Server (NTRS)

Amin, Shreyasee; Achenbach, Sara J.; Atkinson, Elizabeth J.; Sibonga, Jean

2011-01-01

It is well recognized that bone mineral density [BMD] at load-bearing sites of the hip and spine sustain significant loss during space flight, estimated at approximately 0.5-1.0% per month. However, the long-term effects on bone health following return from long-duration space flight remain unclear. It is unknown whether BMD for men recovers beyond 1 year following return from space to what would be predicted or if deficits persist. Using our previously created prediction models, we compared the observed BMD of male US crew following 3 years since returning from longduration space flight with what would be predicted if they had not been exposed to microgravity.

16 CFR Figures 2 and 3 to Part 1512 - Handlebar Stem Loading and Entrance 8 Observation Angles

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Handlebar Stem Loading and Entrance 8 Observation Angles 2 Figures 2 and 3 to Part 1512 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR BICYCLES Pt. 1512, Figs. 2 and 3 Figures 2...

16 CFR Figures 2 and 3 to Part 1512 - Handlebar Stem Loading and Entrance 8 Observation Angles

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Handlebar Stem Loading and Entrance 8 Observation Angles 2 Figures 2 and 3 to Part 1512 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR BICYCLES Pt. 1512, Figs. 2 and 3 Figures 2...

Consumer Guide New Job Opportunities for Women.

ERIC Educational Resources Information Center

Lederer, Muriel; And Others

Combining actual interviews with job information, the author explores current job opportunities for women without college degrees who are entering the job market for the first time, returning to work, or changing positions. The book supplies the reader with guidelines on locating job openings, obtaining inexpensive job training, and advancing up…

Measuring the Quality of the Website User Experience

ERIC Educational Resources Information Center

Sauro, Jeff

2016-01-01

Consumers spend an increasing amount of time and money online finding information, completing tasks, or making purchases. The quality of the website experience has become a key differentiator for organizations--affecting whether they purchase and their likelihood to return and recommend a website to friends. Two instruments were created to more…

Helicopter Colleges: A Return to in Loco Parentis?

ERIC Educational Resources Information Center

Couture, Rene; Schwehm, Jeremy; Couture, Valerie

2017-01-01

The purpose of this study was to examine trends in college/university support services brought about in response to over-involved parental styles. A review of literature reveals five primary types of over-involved parent: consumer advocate, fairness, vicarious college student, toxic, and safety patrol. The researchers surveyed student services…

Effects of Gin Machinery on Cotton Quality

USDA-ARS?s Scientific Manuscript database

Ginning practices affect both the economic returns to cotton producers and the quality of fiber produced for textile mills and, ultimately, consumers. Because of the recent shift from a primarily domestic to an export market for U.S. cotton and the loss of textile market share to synthetic fibers, p...

Societal Incentives for Work: Lessons from Tanzania.

ERIC Educational Resources Information Center

Bjorkquist, David C.

1993-01-01

A study of work and economics, technology, and culture in Tanzania reveals that (1) material returns to rural workers were barely life sustaining; (2) people live dignified lives without consuming much; (3) simpler technological solutions were better; (4) tension exists between competitiveness and humaneness; and (5) tribal traditions contribute…

The Importance of Marketing Segmentation

ERIC Educational Resources Information Center

Martin, Gillian

2011-01-01

The rationale behind marketing segmentation is to allow businesses to focus on their consumers' behaviors and purchasing patterns. If done effectively, marketing segmentation allows an organization to achieve its highest return on investment (ROI) in turn for its marketing and sales expenses. If an organization markets its products or services to…

An Evaluation of the HVAC Load Potential for Providing Load Balancing Service

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lu, Ning

This paper investigates the potential of providing aggregated intra-hour load balancing services using heating, ventilating, and air-conditioning (HVAC) systems. A direct-load control algorithm is presented. A temperature-priority-list method is used to dispatch the HVAC loads optimally to maintain consumer-desired indoor temperatures and load diversity. Realistic intra-hour load balancing signals were used to evaluate the operational characteristics of the HVAC load under different outdoor temperature profiles and different indoor temperature settings. The number of HVAC units needed is also investigated. Modeling results suggest that the number of HVACs needed to provide a {+-}1-MW load balancing service 24 hours a day variesmore » significantly with baseline settings, high and low temperature settings, and the outdoor temperatures. The results demonstrate that the intra-hour load balancing service provided by HVAC loads meet the performance requirements and can become a major source of revenue for load-serving entities where the smart grid infrastructure enables direct load control over the HAVC loads.« less

Quantifying Damage at Multiple Loading Rates to Kevlar KM2 Fibers Due to Weaving and Finishing

DTIC Science & Technology

2013-06-01

ARL-TR-6465 June 2013 Approved for public release; distribution is unlimited. NOTICES...ARL-TR-6465 June 2013 Quantifying Damage at Multiple Loading Rates to Kevlar KM2 Fibers Due to Weaving and Finishing Brett D. Sanborn...OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (DD-MM-YYYY) June 2013 2. REPORT TYPE Final 3. DATES

Water Impact Prediction Tool for Recoverable Rockets

NASA Technical Reports Server (NTRS)

Rooker, William; Glaese, John; Clayton, Joe

2011-01-01

Reusing components from a rocket launch can be cost saving. NASA's space shuttle system has reusable components that return to the Earth and impact the ocean. A primary example is the Space Shuttle Solid Rocket Booster (SRB) that descends on parachutes to the Earth after separation and impacts the ocean. Water impact generates significant structural loads that can damage the booster, so it is important to study this event in detail in the design of the recovery system. Some recent examples of damage due to water impact include the Ares I-X First Stage deformation as seen in Figure 1 and the loss of the SpaceX Falcon 9 First Stage.To ensure that a component can be recovered or that the design of the recovery system is adequate, an adequate set of structural loads is necessary for use in failure assessments. However, this task is difficult since there are many conditions that affect how a component impacts the water and the resulting structural loading that a component sees. These conditions include the angle of impact with respect to the water, the horizontal and vertical velocities, the rotation rate, the wave height and speed, and many others. There have been attempts to simulate water impact. One approach is to analyze water impact using explicit finite element techniques such as those employed by the LS-Dyna tool [1]. Though very detailed, this approach is time consuming and would not be suitable for running Monte Carlo or optimization analyses. The purpose of this paper is to describe a multi-body simulation tool that runs quickly and that captures the environments a component might see. The simulation incorporates the air and water interaction with the component, the component dynamics (i.e. modes and mode shapes), any applicable parachutes and lines, the interaction of winds and gusts, and the wave height and speed. It is capable of quickly conducting Monte Carlo studies to better capture the environments and genetic algorithm optimizations to reproduce a flight.

Optimum load distribution between heat sources based on the Cournot model

NASA Astrophysics Data System (ADS)

Penkovskii, A. V.; Stennikov, V. A.; Khamisov, O. V.

2015-08-01

One of the widespread models of the heat supply of consumers, which is represented in the "Single buyer" format, is considered. The methodological base proposed for its description and investigation presents the use of principles of the theory of games, basic propositions of microeconomics, and models and methods of the theory of hydraulic circuits. The original mathematical model of the heat supply system operating under conditions of the "Single buyer" organizational structure provides the derivation of a solution satisfying the market Nash equilibrium. The distinctive feature of the developed mathematical model is that, along with problems solved traditionally within the bounds of bilateral relations of heat energy sources-heat consumer, it considers a network component with its inherent physicotechnical properties of the heat network and business factors connected with costs of the production and transportation of heat energy. This approach gives the possibility to determine optimum levels of load of heat energy sources. These levels provide the given heat energy demand of consumers subject to the maximum profit earning of heat energy sources and the fulfillment of conditions for formation of minimum heat network costs for a specified time. The practical realization of the search of market equilibrium is considered by the example of a heat supply system with two heat energy sources operating on integrated heat networks. The mathematical approach to the solution search is represented in the graphical form and illustrates computations based on the stepwise iteration procedure for optimization of levels of loading of heat energy sources (groping procedure by Cournot) with the corresponding computation of the heat energy price for consumers.

The Return of Magnetic Flux to the Inner Saturnian Magnetosphere

NASA Astrophysics Data System (ADS)

Lai, Hairong; Russell, Christopher T.; Jia, Yingdong; Masters, Adam; Dougherty, Michele K.

2017-04-01

The addition of plasma to the rotating inner Saturnian magnetosphere drives the circulation of the magnetic flux. The magnetic flux is loaded with cold plasma originating from Enceladus and its plasma torus. It then convects outward to the tail region, is emptied of plasma during reconnection events, and returns buoyantly to the inner magnetosphere. Returning flux tubes carry hot and tenuous plasma that serves as a marker of this type of flux tube. The plasma inside the tubes drifts at different rates depending on energy in the curved and inhomogeneous magnetosphere when the tubes convect inward. This energy dispersion can be used to track the flux tube. With data from MAG and CAPS, we model the energy dispersion of the electrons to determine the age and the point of return of the 'empty' flux tubes. The results show that even the 'fresh' flux tubes are several hours old when seen and they start to return at 19 Saturn radii, near Titan's orbit. This supports the hypothesis that returning flux tubes generated by reconnection in the far-tail region are injected directly into the inner magnetosphere.

Recovery of lower limb function following 6 weeks of non-weight bearing

NASA Astrophysics Data System (ADS)

MacIntyre, Donna L.; Eng, Janice J.; Allen, Trevor J.

2005-05-01

Skeletal muscle weakness and atrophy occur following an extended period of decreased use, including space flight and limb unloading. It is also likely that affected muscles will be susceptible to a re-loading injury when they begin return to earth or weight bearing. However, there is a paucity of literature evaluating the response of human unloaded muscle to exercise and return to activity. The purpose of this pilot study was to evaluate the soreness, function and strength response of muscle to re-loading in seven patients who were non-weight bearing for 6 weeks, compared to five healthy subjects. Function improved significantly over time for the patients but was still less than the healthy subjects over 12 weeks of physiotherapy. Concentric quadriceps muscle strength increased significantly over time for the patients. There was considerable variability in the patients' reports of muscle soreness but there were no significant changes over time or between groups.

The CRAF/Cassini power subsystem - Preliminary design update

NASA Technical Reports Server (NTRS)

Atkins, Kenneth L.; Brisendine, Philip; Clark, Karla; Klein, John; Smith, Richard

1991-01-01

A chronology is provided of the rationale leading from the early Mariner spacecraft to the CRAF/Cassini Mariner Mark II power subsystem architecture. The display pathway began with a hybrid including a solar photovoltaic array, a radioisotope thermoelectric generator (RTG), and a battery supplying a power profile with a peak loading of about 300 W. The initial concept was to distribute power through a new solid-state, programmable switch controlled by an embedded microprocessor. As the overall mission, science, and project design matured, the power requirements increased. The design evolved from the hybrid to two RTG plus batteries to meet peak loadings of near 500 W in 1989. Later that year, circumstances led to abandonment of the distributed computer concept and a return to centralized control. Finally, as power requirements continued to grow, a third RTG was added to the design and the battery removed, with the return to the discharge-controller for transients during fault recovery procedures.

Spacecraft Radiator Freeze Protection Using a Regenerative Heat Exchanger

NASA Technical Reports Server (NTRS)

Ungar, Eugene K.; Schunk, Richard G.

2011-01-01

An active thermal control system architecture has been modified to include a regenerative heat exchanger (regenerator) inboard of the radiator. Rather than using a radiator bypass valve a regenerative heat exchanger is placed inboard of the radiators. A regenerator cold side bypass valve is used to set the return temperature. During operation, the regenerator bypass flow is varied, mixing cold radiator return fluid and warm regenerator outlet fluid to maintain the system setpoint. At the lowest heat load for stable operation, the bypass flow is closed off, sending all of the flow through the regenerator. This lowers the radiator inlet temperature well below the system set-point while maintaining full flow through the radiators. By using a regenerator bypass flow control to maintain system setpoint, the required minimum heat load to avoid radiator freezing can be reduced by more than half compared to a radiator bypass system.

Returning HIV-1 viral load results to participant-selected health facilities in national Population-based HIV Impact Assessment (PHIA) household surveys in three sub-Saharan African Countries, 2015 to 2016.

PubMed

Saito, Suzue; Duong, Yen T; Metz, Melissa; Lee, Kiwon; Patel, Hetal; Sleeman, Katrina; Manjengwa, Julius; Ogollah, Francis M; Kasongo, Webster; Mitchell, Rick; Mugurungi, Owen; Chimbwandira, Frank; Moyo, Crispin; Maliwa, Vusumuzi; Mtengo, Helecks; Nkumbula, Tepa; Ndongmo, Clement B; Vere, Nora Skutayi; Chipungu, Geoffrey; Parekh, Bharat S; Justman, Jessica; Voetsch, Andrew C

2017-11-01

Logistical complexities of returning laboratory test results to participants have precluded most population-based HIV surveys conducted in sub-Saharan Africa from doing so. For HIV positive participants, this presents a missed opportunity for engagement into clinical care and improvement in health outcomes. The Population-based HIV Impact Assessment (PHIA) surveys, which measure HIV incidence and the prevalence of viral load (VL) suppression in selected African countries, are returning VL results to health facilities specified by each HIV positive participant within eight weeks of collection. We describe the performance of the specimen and data management systems used to return VL results to PHIA participants in Zimbabwe, Malawi and Zambia. Consenting participants underwent home-based counseling and HIV rapid testing as per national testing guidelines; all confirmed HIV positive participants had VL measured at a central laboratory on either the Roche CAP/CTM or Abbott m2000 platform. On a bi-weekly basis, a dedicated data management team produced logs linking the VL test result with the participants' contact information and preferred health facility; project staff sent test results confidentially via project drivers, national courier systems, or electronically through an adapted short message service (SMS). Participants who provided cell phone numbers received SMS or phone call alerts regarding availability of VL results. From 29,634 households across the three countries, 78,090 total participants 0 to 64 years in Zimbabwe and Malawi and 0 to 59 years in Zambia underwent blood draw and HIV testing. Of the 8391 total HIV positive participants identified, 8313 (99%) had VL tests performed and 8245 (99%) of these were returned to the selected health facilities. Of the 5979 VL results returned in Zimbabwe and Zambia, 85% were returned within the eight-week goal with a median turnaround time of 48 days (IQR: 33 to 61). In Malawi, where exact return dates were unavailable all 2266 returnable results reached the health facilities by 11 weeks. The first three PHIA surveys returned the vast majority of VL results to each HIV positive participant's preferred health facility within the eight-week target. Even in the absence of national VL monitoring systems, a system to return VL results from a population-based survey is feasible, but it requires developing laboratory and data management systems and dedicated staff. These are likely important requirements to strengthen return of results systems in routine clinical care. © 2017 The Authors. Journal of the International AIDS Society published by John Wiley & sons Ltd on behalf of the International AIDS Society.

Empirical Investigations of the Opportunity Limits of Automatic Residential Electric Load Shaping

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cruickshank, Robert F.; Henze, Gregor P.; Balaji, Rajagopalan

Residential electric load shaping is often modeled as infrequent, utility-initiated, short-duration deferral of peak demand through direct load control. In contrast, modeled herein is the potential for frequent, transactive, intraday, consumer-configurable load shaping for storage-capable thermostatically controlled electric loads (TCLs), including refrigerators, freezers, and hot water heaters. Unique to this study are 28 months of 15-minute-interval observations of usage in 101 homes in the Pacific Northwest United States that specify exact start, duration, and usage patterns of approximately 25 submetered loads per home. The magnitudes of the load shift from voluntarily-participating TCL appliances are aggregated to form hourly upper andmore » lower load-shaping limits for the coordination of electrical generation, transmission, distribution, storage, and demand. Empirical data are statistically analyzed to define metrics that help quantify load-shaping opportunities.« less

Empirical Investigations of the Opportunity Limits of Automatic Residential Electric Load Shaping: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cruickshank, Robert F.; Henze, Gregor P.; Balaji, Rajagopalan

Residential electric load shaping is often modeled as infrequent, utility-initiated, short-duration deferral of peak demand through direct load control. In contrast, modeled herein is the potential for frequent, transactive, intraday, consumer-configurable load shaping for storage-capable thermostatically controlled electric loads (TCLs), including refrigerators, freezers, and hot water heaters. Unique to this study are 28 months of 15-minute-interval observations of usage in 101 homes in the Pacific Northwest United States that specify exact start, duration, and usage patterns of approximately 25 submetered loads per home. The magnitudes of the load shift from voluntarily-participating TCL appliances are aggregated to form hourly upper andmore » lower load-shaping limits for the coordination of electrical generation, transmission, distribution, storage, and demand. Empirical data are statistically analyzed to define metrics that help quantify load-shaping opportunities.« less

Comparison of Deterministic and Probabilistic Radial Distribution Systems Load Flow

NASA Astrophysics Data System (ADS)

Gupta, Atma Ram; Kumar, Ashwani

2017-12-01

Distribution system network today is facing the challenge of meeting increased load demands from the industrial, commercial and residential sectors. The pattern of load is highly dependent on consumer behavior and temporal factors such as season of the year, day of the week or time of the day. For deterministic radial distribution load flow studies load is taken as constant. But, load varies continually with a high degree of uncertainty. So, there is a need to model probable realistic load. Monte-Carlo Simulation is used to model the probable realistic load by generating random values of active and reactive power load from the mean and standard deviation of the load and for solving a Deterministic Radial Load Flow with these values. The probabilistic solution is reconstructed from deterministic data obtained for each simulation. The main contribution of the work is: Finding impact of probable realistic ZIP load modeling on balanced radial distribution load flow. Finding impact of probable realistic ZIP load modeling on unbalanced radial distribution load flow. Compare the voltage profile and losses with probable realistic ZIP load modeling for balanced and unbalanced radial distribution load flow.

Flight Investigation on a Fighter-type Airplane of Factors which Affect the Loads and Load Distributions on the Vertical Tail Surfaces During Rudder Kicks and Fishtails

NASA Technical Reports Server (NTRS)

Boshar, John

1947-01-01

Results are presented of a flight investigation conducted on a fighter-type airplane to determine the factors which affect the loads and load distributions on the vertical tail surfaces in maneuvers. An analysis is made of the data obtained in steady flight, rudder kicks, and fishtail maneuvers. For the rudder kicks, the significant loads were the "deflection load" resulting from an abrupt control deflection and the "dynamic load" consisting of a load corresponding to the new static equilibrium condition for the rudder deflected plus a load due to a transient overshoot. The minimum time to reach the maximum control deflection attainable by the pilot in any flight condition was found to be a constant. In the fishtail maneuvers, it was found that the pilot tends to deflect the rudder in phase with the natural frequency of the airplane. The maximum loads measured in fishtails were of the same order of magnitude as those from a rudder kick in which the rudder is returned to zero at the time of maximum sideslip.

Incentive-compatible guaranteed renewable health insurance premiums.

PubMed

Herring, Bradley; Pauly, Mark V

2006-05-01

Theoretical models of guaranteed renewable insurance display front-loaded premium schedules. Such schedules both cover lifetime total claims of low-risk and high-risk individuals and provide an incentive for those who remain low-risk to continue to purchase the policy. Questions have been raised of whether actual individual insurance markets in the US approximate the behavior predicted by these models, both because young consumers may not be able to "afford" front-loading and because insurers may behave strategically in ways that erode the value of protection against risk reclassification. In this paper, the optimal competitive age-based premium schedule for a benchmark guaranteed renewable health insurance policy is estimated using medical expenditure data. Several factors are shown to reduce the amount of front-loading necessary. Indeed, the resulting optimal premium path increases with age. Actual premium paths exhibited by purchasers of individual insurance are close to the optimal renewable schedule we estimate. Finally, consumer utility associated with the feature is examined.

Exploring the impact of network tariffs on household electricity expenditures using load profiles and socio-economic characteristics

NASA Astrophysics Data System (ADS)

Azarova, Valeriya; Engel, Dominik; Ferner, Cornelia; Kollmann, Andrea; Reichl, Johannes

2018-04-01

Growing self-generation and storage are expected to cause significant changes in residential electricity utilization patterns. Commonly applied volumetric network tariffs may induce imbalance between different groups of households and their respective contribution to recovering the operating costs of the grid. Understanding consumer behaviour and appliance usage together with socio-economic factors can help regulatory authorities to adapt network tariffs to new circumstances in a fair way. Here, we assess the effects of 11 network tariff scenarios on household budgets using real load profiles from 765 households. Thus we explore the possibly disruptive impact of applying peak-load-based tariffs on the budgets of households when they have been mainly charged for consumed volumes before. Our analysis estimates the change in household network expenditure for different combinations of energy, peak and fixed charges, and can help to design tariffs that recover the costs needed for the sustainable operation of the grid.

Rhabdomyolysis in a Patient Taking Both Oxandrolone for Bodybuilding and Methamphetamine.

PubMed

Krzyzak, Michael; Elangovan, Natarajan

2017-11-13

Nonprescription drug use is increasingly prevalent in the United States. We report a case of a 31-year-old male who presented with hallucinations and was found to have rhabdomyolysis. He was consuming oxandrolone for six weeks and ingested methamphetamine the night prior to presentation. With supportive treatment, including intravenous hydration, the patient's mental status returned to baseline and rhabdomyolysis resolved. Our case illustrates the need to understand the interaction between different illicit substances. More research needs to be done to further understand the reactions between different medications as patients consume different combinations of substances.

Rhabdomyolysis in a Patient Taking Both Oxandrolone for Bodybuilding and Methamphetamine

PubMed Central

Elangovan, Natarajan

2017-01-01

Nonprescription drug use is increasingly prevalent in the United States. We report a case of a 31-year-old male who presented with hallucinations and was found to have rhabdomyolysis. He was consuming oxandrolone for six weeks and ingested methamphetamine the night prior to presentation. With supportive treatment, including intravenous hydration, the patient’s mental status returned to baseline and rhabdomyolysis resolved. Our case illustrates the need to understand the interaction between different illicit substances. More research needs to be done to further understand the reactions between different medications as patients consume different combinations of substances. PMID:29344437

Perfluoroalkyl and polyfluoroalkyl substances in consumer products.

PubMed

Kotthoff, Matthias; Müller, Josef; Jürling, Heinrich; Schlummer, Martin; Fiedler, Dominik

2015-10-01

Perfluoroalkyl and polyfluoroalkyl substances (PFAS) are used in a wide range of products of all day life. Due to their toxicological potential, an emerging focus is directed towards their exposure to humans. This study investigated the PFAS load of consumer products in a broad perspective. Perfluoroalkyl sulfonic acids (C4, C6-C8, C10-PFSA), carboxylic acids (C4-C14-PFCA) and fluorotelomer alcohols (4:2, 6:2; 8:2 and 10:2 FTOH) were analysed in 115 random samples of consumer products including textiles (outdoor materials), carpets, cleaning and impregnating agents, leather samples, baking and sandwich papers, paper baking forms and ski waxes. PFCA and PFSA were analysed by HPLC-MS/MS, whereas FTOH were detected by GC/CI-MS. Consumer products such as cleaning agents or some baking and sandwich papers show low or negligible PFSA and PFCA contents. On the other hand, high PFAS levels were identified in ski waxes (up to about 2000 μg/kg PFOA), leather samples (up to about 200 μg/kg PFBA and 120 μg/kg PFBS), outdoor textiles (up to 19 μg/m(2) PFOA) and some other baking papers (up to 15 μg/m(2) PFOA). Moreover, some test samples like carpet and leather samples and outdoor materials exceeded the EU regulatory threshold value for PFOS (1 μg/m(2)). A diverse mixture of PFASs can be found in consumer products for all fields of daily use in varying concentrations. This study proves the importance of screening and monitoring of consumer products for PFAS loads and the necessity for an action to regulate the use of PFASs, especially PFOA, in consumer products.

Synthesis of resistive tapers to control scattering patterns of strips

NASA Astrophysics Data System (ADS)

Haupt, Randy L.

Scattering occurs when an electromagnetic wave impinges on an object and creates currents in that object which reradiate other electromagnetic waves. Three primary methods exist to reduce microwave scattering from an object: covering it with absorber, changing its shape, and detuning it through impedance loading. Absorbers convert unwanted electromagnetic energy into heat. An example is lining an anechoic chamber with absorbers. Changing its shape channels energy from one direction to another, changes dominant scattering centers, or causes returns from one direction to another, changes dominant scattering centers, or causes returns from various parts to coherently add and cancel the total return. Impedance loading alters the resonant frequency of an object. Absorbers have the most attractive features. They have a broad bandwidth, attenuate the return in many directions, and may be used to reduce scattering from an object after the object is designed. Before trying to control scattering from complex shapes, such as an antenna or airplane, one should try to develop methods to control scattering from simple objects. A very simple object is two dimensional strip. It is infinitely thin, has a finite width, and an infinite length. The scattering pattern of the strip depends upon its width and material composition. Varying these two factors provides a means for controlling the radar cross-section (RCS) of the strip. The goal of this thesis is to synthesize resistive tapers for the strip that produce desired bistatic scattering and backscattering patterns.

Can Online Consumers Contribute to Drug Knowledge? A Mixed-Methods Comparison of Consumer-Generated and Professionally Controlled Psychotropic Medication Information on the Internet

PubMed Central

Cohen, David

2011-01-01

Background Ongoing initiatives to filter online health searches exclude consumer-generated content from search returns, though its inferiority compared with professionally controlled content is not demonstrated. The antidepressant escitalopram and the antipsychotic quetiapine have ranked over the last 5 years as top-selling agents in their respective drug classes. Both drugs have various off-label mental health and non–mental health uses, ranging from the relief of insomnia and migraines to the treatment of severe developmental disorders. Objective Our objective was to describe the most frequently reported effects of escitalopram and quetiapine in online consumer reviews, to compare them with effects described in professionally controlled commercial health websites, and to gauge the usability of online consumer medication reviews. Methods A stratified simple random sample of 960 consumer reviews was selected from all 6998 consumer reviews of the two drugs in 2 consumer-generated (www.askapatient.com and www.crazymeds.us) and 2 professionally controlled (www.webmd.com and www.revolutionhealth.com) health websites. Professional medication descriptions included all standard information on the medications from the latter 2 websites. All textual data were inductively coded for medication effects, and intercoder agreement was assessed. Chi-square was used to test for associations between consumer-reported effects and website origination. Results Consumers taking either escitalopram (n = 480) or quetiapine (n = 480) most frequently reported symptom improvement (30.4% or 146/480, 24.8% or 119/480) or symptom worsening (15.8% or 76/480, 10.2% or 49/480), changes in sleep (36% or 173/480, 60.6% or 291/480) and changes in weight and appetite (22.5% or 108/480, 30.8% or 148/480). More consumers posting reviews on consumer-generated rather than professionally controlled websites reported symptom worsening on quetiapine (17.3% or 38/220 versus 5% or 11/220, P < .001), while more consumers posting on professionally controlled websites reported symptom improvement (32.7% or 72/220 versus 21.4% or 47/220, P = .008). Professional descriptions more frequently listed physical adverse effects and warnings about suicidal ideation while consumer reviews emphasized effects disrupting daily routines and provided richer descriptions of effects in context. The most recent 20 consumer reviews on each drug from each website (n = 80) were comparable to the full sample of reviews in the frequency of commonly reported effects. Conclusion Consumer reviews and professional medication descriptions generally reported similar effects of two psychotropic medications but differed in their descriptions and in frequency of reporting. Professional medication descriptions offer the advantage of a concise yet comprehensive listing of drug effects, while consumer reviews offer greater context and situational examples of how effects may manifest in various combinations and to varying degrees. The dispersion of consumer reviews across websites limits their integration, but a brief browsing strategy on the two target medications nonetheless retrieved representative consumer content. Current strategies for filtering online health searches to return only trusted or approved websites may inappropriately address the challenge to identify quality health sources on the Internet because such strategies unduly limit access to an entire complementary source for health information. PMID:21807607

Evaluation of the US Army Research Laboratory Squeeze 5 Magnetic Flux Compression Generator

DTIC Science & Technology

2016-09-01

Another potential loss in the system is the load itself. Arcing between connecting parts of the load can result in a large increase in resistance. This...the use thereof. Destroy this report when it is no longer needed. Do not return it to the originator. ARL-TR-7795 ● SEP 2016...unlimited. FOR OFFICIAL USE ONLY (delete if not FOUO) ii REPORT DOCUMENTATION PAGE Form Approved OMB No . 0704-0188 Public reporting burden

Influence of sludge properties and hydraulic loading on the performance of secondary settling tanks--full-scale operational results.

PubMed

Vestner, R J; Günthert, F Wolfgang

2004-01-01

Full-scale investigations at a WWTP with a two-stage secondary settling tank process revealed relationships between significant operating parameters and performance in terms of effluent suspended solids concentration. Besides common parameters (e.g. surface overflow rate and sludge volume loading rate) feed SS concentration and flocculation time must be considered. Concentration of the return activated sludge may help to estimate the performance of existing secondary settling tanks.

Ongoing Capabilities and Developments of Re-Entry Plasma Ground Tests at EADS-ASTRIUM

NASA Technical Reports Server (NTRS)

Jullien, Pierre

2008-01-01

During re-entry, spacecrafts are subjected to extreme thermal loads. On mars, they may go through dust storms. These external heat loads are leading the design of re-entry vehicles or are affecting it for spacecraft facing solid propellant jet stream. Sizing the Thermal Protection System require a good knowledge of such solicitations and means to model and reproduce them on earth. Through its work on European projects, ASTRIUM has developed the full range of competences to deal with such issues. For instance, we have designed and tested the heat-shield of the Huygens probe which landed on Titan. In particular, our plasma generators aim to reproduce a wide variety of re-entry conditions. Heat loads are generated by the huge speed of the probes. Such conditions cannot be fully reproduced. Ground tests focus on reproducing local aerothermal loads by using slower but hotter flows. Our inductive plasma torch enables to test little samples at low TRL. Amongst the arc-jets, one was design to test architecture design of ISS crew return system and others fit more severe re-entry such as sample returns or Venus re-entry. The last developments aimed in testing samples in seeded flows. First step was to design and test the seeding device. Special diagnostics characterizing the resulting flow enabled us to fit it to the requirements.

Understanding Coordination of Care from the Consumer's Perspective in a Regional Health System

PubMed Central

Harrison, Alexandra; Verhoef, Marja

2002-01-01

Objective To understand and develop a model about the meaning of coordination to consumers who experienced a transition from acute care to home care. Study Design A qualitative, exploratory study using Grounded Theory. Data Sources/Analysis Thirty-three consumers in the Calgary Regional Health Authority who had experienced the transition from an acute care hospital back into the community with home care support were interviewed. They were asked to describe their transition experience and what aspects of coordination were important to them. Interviews were recorded, transcribed, and analyzed using constant comparison. The coding and retrieval of information was facilitated by the computer software program Nud*ist. Principal Findings The resulting model has four components: (1) the meaning of coordination to consumers; (2) aspects of health care system support that are important for coordination; (3) elements that prepared consumers to return home; and (4) the components of a successful transition experience. Consumers appeared to play a crucial role in spanning organizational boundaries by participating in the coordination of their own care. Conclusions Consumers must be included in health care decisions as recipients of services and major players in the transition processes related to their care. Health care providers need to ensure that consumers are prepared to carry out their coordination role and managers need to foster a culture that values the consumer “voice” in organizational processes. PMID:12236382

Field Test of Boiler Primary Loop Temperature Controller

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glanville, P.; Rowley, P.; Schroeder, D.

Beyond these initial system efficiency upgrades are an emerging class of Advanced Load Monitoring (ALM) aftermarket controllers that dynamically respond to the boiler load, with claims of 10% to 30% of fuel savings over a heating season. For hydronic boilers specifically, these devices perform load monitoring, with continuous measurement of supply and, in some cases, return water temperatures. Energy savings from these ALM controllers are derived from dynamic management of the boiler differential, where a microprocessor with memory of past boiler cycles prevents the boiler from firing for a period of time, to limit cycling losses and inefficient operation duringmore » perceived low load conditions. These differ from OTR controllers, which vary boiler setpoint temperatures with ambient conditions while maintaining a fixed differential.« less

Simulated Reentry Heating by Torching

NASA Technical Reports Server (NTRS)

Harvey, Gale A.

2008-01-01

The two first order reentry heating parameters are peak heating flux (W/cm2) and peak heat load (kJ/cm2). Peak heating flux (and deceleration, gs) is higher for a ballistic reentry and peak heat load is higher for a lifting reentry. Manned vehicle reentries are generally lifting reentries at nominal 1-5 gs so that personnel will not be crushed by high deceleration force. A few off-nominal manned reentries have experienced 8 or more gs with corresponding high heating flux (but below nominal heat load). The Shuttle Orbiter reentries provide about an order of magnitude difference in peak heating flux at mid-bottom (TPS tiles, approximately 6 W/cm2 or 5 BTU/ft2- sec) and leading edge (RCC, approximately 60 W/cm2 or 50 BTU/ft2- sec). Orion lunar return and Mars sample lander are of the same order of magnitude as orbiter leading edge peak heat loads. Flight temperature measurements are available for some orbiter TPS tile and RCC locations. Return-to-Flight on-orbit tile-repair-candidate-material-heating performance was evaluated by matching propane torch heating of candidate-materials temperatures at several depths to orbiter TPS tile flight-temperatures. Char and ash characteristics, heat expansion, and temperature histories at several depths of the cure-in-place ablator were some of the TPS repair material performance characteristics measured. The final char surface was above the initial surface for the primary candidate (silicone based) material, in contrast to a receded surface for the Apollo-type ablative heat shield material. Candidate TPS materials for Orion CEV (LEO and lunar return), and for Mars sample lander are now being evaluated. Torching of a candidate ablator material, PICA, was performed to match the ablation experienced by the STARDUST PICA heat shield. Torching showed that the carbon fiberform skeleton in a sample of PICA was inhomogeneous in that sample, and allowed measurements (of the clumps and voids) of the inhomogeneity. Additional reentry heating-performance characterizations of high temperature insulation materials were performed.

A Flexible Method for Producing F.E.M. Analysis of Bone Using Open-Source Software

NASA Technical Reports Server (NTRS)

Boppana, Abhishektha; Sefcik, Ryan; Myers, Jerry G.; Lewandowski, Beth

2016-01-01

Individuals who experience decreases in load-bearing bone densities can be subject to a higher risk of bone fracture during daily activity. Astronauts may lose up to nine percent of their load-bearing bone density for every month they spend in space [1]. Because of this, specialized countermeasures reduce percent loss in bone density and reduce fracture risk upon returning to Earth. Astronauts will typically not be at risk for fracture during spaceflight, because of the lesser loads experienced in microgravity conditions. However, once back on Earth, astronauts have an increased risk for bone fracture as a result of weakened bone and return to 1G conditions [2]. It is therefore important to understand the significance of any bone density loss in addition to developing exercises in an attempt to limit losses in bone strength. NASA seeks to develop a deeper understanding of fracture risk through the development of a computational bone strength model to assess the bone fracture risk of astronauts pre-flight and post-flight. This study addresses the several key processes needed to develop such strength analyses using medical image processing and finite element modeling.

Technology in the College Classroom: Crisis and Opportunity

ERIC Educational Resources Information Center

Conefrey, Theresa

2016-01-01

The 21st century classroom is large, diverse, underfunded, and populated by students weaned on digital devices espousing a consumer mentality looking for a good return on investment (ROI) on their education. These students, the so-called "millennials," and the coming Generation Z, who have grown up in the digital age, are more pragmatic…

Using Online Games to Teach Personal Finance Concepts

ERIC Educational Resources Information Center

Huang, Chin-Wen; Hsu, Chun-Pin

2011-01-01

This case study explores the use of online games to teach personal finance concepts at the college level. A number of free online games targeting such topics as budgeting and saving, risk and return, consumer credit, financial services, and investments were introduced to the experimental group as homework assignments. Statistical results indicate…

An Indirect Test of Children's Influence on Efficiencies in Parental Consumer Behavior.

ERIC Educational Resources Information Center

Polachek, Dora E.; Polachek, Solomon W.

1989-01-01

Results of a statistical test show that not only do children have an influence on parental consumption, but also that the influence is beneficial. Not accounting for this benefit could cause underestimation of the rate of return to education or benefits of governmental programs such as Head Start. (JOW)

Discretionary salt use in airline meal service.

PubMed

Wallace, S; Wellman, N S; Dierkes, K E; Johnson, P M

1987-02-01

Salt use in airline meal service was studied through observation of returned meal trays of 932 passengers. Observation and weighing of salt packets on returned trays revealed that 64% of passengers did not salt their airline dinner, while 6% used the entire salt packet, 0.92 gm NaCl (362 mg Na). Average discretionary salt use among the 234 passengers (25%) who added salt was 0.57 gm NaCl (232 mg Na). Estimates of total sodium in the four airline dinners averaged 2.0 gm NaCl (786 mg Na). Laboratory assays of menu items produced by the airline foodservice differed 3% to 19% from estimated values. Sodium content of the four airline dinner menus was similar and did not affect salt use. Discretionary salt use was related to the total amount of entrée consumed but was not affected by the amount of salad consumed. It is postulated that salt use in the "captive" airline situation is predicated on consistent, habitual practices. Lowering sodium consumption in this setting may require alteration in both food preparation methods and quantity of salt presented in the packets.

Earth Entry Vehicle Design for Sample Return Missions Using M-SAPE

NASA Technical Reports Server (NTRS)

Samareh, Jamshid

2015-01-01

Most mission concepts that return sample material to Earth share one common element: an Earth entry vehicle (EEV). The primary focus of this paper is the examination of EEV design space for relevant sample return missions. Mission requirements for EEV concepts can be divided into three major groups: entry conditions (e.g., velocity and flight path angle), payload (e.g., mass, volume, and g-load limit), and vehicle characteristics (e.g., thermal protection system, structural topology, and landing concepts). The impacts of these requirements on the EEV design have been studied with an integrated system analysis tool, and the results will be discussed in details. In addition, through sensitivities analyses, critical design drivers that have been identified will be reviewed.

Tendon Contraction After Cyclic Elongation Is an Age-Dependent Phenomenon: In Vitro and In Vivo Comparisons.

PubMed

Lavagnino, Michael; Bedi, Asheesh; Walsh, Christopher P; Sibilsky Enselman, Elizabeth R; Sheibani-Rad, Shahin; Arnoczky, Steven P

2014-06-01

Tendons are viscoelastic tissues that deform (elongate) in response to cyclic loading. However, the ability of a tendon to recover this elongation is unknown. Tendon length significantly increases after in vivo or in vitro cyclic loading, and the ability to return to its original length through a cell-mediated contraction mechanism is an age-dependent phenomenon. Controlled laboratory study. In vitro, rat tail tendon fascicles (RTTfs) from Sprague-Dawley rats of 3 age groups (1, 3, and 12 months) underwent 2% cyclic strain at 0.17 Hz for 2 hours, and the percentages of elongation were determined. After loading, the RTTfs were suspended for 3 days under tissue culture conditions and photographed daily to determine the amount of length contraction. In vivo, healthy male participants (n = 29; age, 19-49 years) had lateral, single-legged weightbearing radiographs taken of the knee at 60° of flexion immediately before, immediately after, and 24 hours after completing eccentric quadriceps loading exercises on the dominant leg to fatigue. Measurements of patellar tendon length were taken from the radiographs, and the percentages of tendon elongation and subsequent contraction were calculated. In vitro, cyclic loading increased the length of all RTTfs, with specimens from younger (1 and 3 months) rats demonstrating significantly greater elongation than those from older (12 months) rats (P = .009). The RTTfs contracted to their original length significantly faster (P < .001) and in an age-dependent fashion, with younger animals contracting faster. In vivo, repetitive eccentric loading exercises significantly increased patellar tendon length (P < .001). Patellar tendon length decreased 24 hours after exercises (P < .001) but did not recover completely (P < .001). There was a weak but significant (R (2) = 0.203, P = .014) linear correlation between the amount of tendon contraction and age, with younger participants (<30 years) demonstrating significantly more contraction (P = .014) at 24 hours than older participants (>30 years). Cyclic tendon loading results in a significant increase in tendon elongation under both in vitro and in vivo conditions. Tendons in both conditions demonstrated an incomplete return to their original length after 24 hours, and the extent of this return was age dependent. The age- and time-dependent contraction of tendons, elongated after repetitive loading, could result in transient alterations in the mechanobiological environment of tendon cells. This, in turn, could induce the onset of catabolic changes associated with the pathogenesis of tendinopathy. These results suggest the importance of allowing time for contraction between bouts of repetitive exercise and may explain why age is a predisposing factor in tendinopathy. © 2014 The Author(s).

Fruit load induces changes in global gene expression and in abscisic acid (ABA) and indole acetic acid (IAA) homeostasis in citrus buds

PubMed Central

Shalom, Liron; Samuels, Sivan; Zur, Naftali; Shlizerman, Lyudmila; Doron-Faigenboim, Adi; Blumwald, Eduardo; Sadka, Avi

2014-01-01

Many fruit trees undergo cycles of heavy fruit load (ON-Crop) in one year, followed by low fruit load (OFF-Crop) the following year, a phenomenon known as alternate bearing (AB). The mechanism by which fruit load affects flowering induction during the following year (return bloom) is still unclear. Although not proven, it is commonly accepted that the fruit or an organ which senses fruit presence generates an inhibitory signal that moves into the bud and inhibits apical meristem transition. Indeed, fruit removal from ON-Crop trees (de-fruiting) induces return bloom. Identification of regulatory or metabolic processes modified in the bud in association with altered fruit load might shed light on the nature of the AB signalling process. The bud transcriptome of de-fruited citrus trees was compared with those of ON- and OFF-Crop trees. Fruit removal resulted in relatively rapid changes in global gene expression, including induction of photosynthetic genes and proteins. Altered regulatory mechanisms included abscisic acid (ABA) metabolism and auxin polar transport. Genes of ABA biosynthesis were induced; however, hormone analyses showed that the ABA level was reduced in OFF-Crop buds and in buds shortly following fruit removal. Additionally, genes associated with Ca2+-dependent auxin polar transport were remarkably induced in buds of OFF-Crop and de-fruited trees. Hormone analyses showed that auxin levels were reduced in these buds as compared with ON-Crop buds. In view of the auxin transport autoinhibition theory, the possibility that auxin distribution plays a role in determining bud fate is discussed. PMID:24706719

An analytics of electricity consumption characteristics based on principal component analysis

NASA Astrophysics Data System (ADS)

Feng, Junshu

2018-02-01

Abstract . More detailed analysis of the electricity consumption characteristics can make demand side management (DSM) much more targeted. In this paper, an analytics of electricity consumption characteristics based on principal component analysis (PCA) is given, which the PCA method can be used in to extract the main typical characteristics of electricity consumers. Then, electricity consumption characteristics matrix is designed, which can make a comparison of different typical electricity consumption characteristics between different types of consumers, such as industrial consumers, commercial consumers and residents. In our case study, the electricity consumption has been mainly divided into four characteristics: extreme peak using, peak using, peak-shifting using and others. Moreover, it has been found that industrial consumers shift their peak load often, meanwhile commercial and residential consumers have more peak-time consumption. The conclusions can provide decision support of DSM for the government and power providers.

Solar powered actuator with continuously variable auxiliary power control

NASA Technical Reports Server (NTRS)

Nola, F. J. (Inventor)

1984-01-01

A solar powered system is disclosed in which a load such as a compressor is driven by a main induction motor powered by a solar array. An auxiliary motor shares the load with the solar powered motor in proportion to the amount of sunlight available, is provided with a power factor controller for controlling voltage applied to the auxiliary motor in accordance with the loading on that motor. In one embodiment, when sufficient power is available from the solar cell, the auxiliary motor is driven as a generator by excess power from the main motor so as to return electrical energy to the power company utility lines.

Milk marketing policy options for the dairy industry in New England.

PubMed

Doyon, M; Criner, G; Bragg, L A

2008-03-01

New England dairy farmers are under intense price pressure resulting from important growth in milk production from lower cost of production Southwest states as well as by retailers' market power. Agricultural officials and legislative bodies in New England and in other Northeast US states are aware of these pressures and have been reacting with emergency dairy farm aid, following a very low 2006 milk price, and with state legislations in an attempt to address perceived excess retailing margins for fluid milk. In this paper, we suggest that a sigmoid demand relationship exists for fluid milk. This demand relationship would explain fluid milk asymmetric price transmission, high-low pricing, and the creation of a large retailing margin (chain surplus) often observed for fluid milk. It is also argued that a sigmoid demand relationship offers an opportunity for state legislators to help Northeast dairy farmers capturing a larger share of the dollar of the consumers through various policy options. Therefore, 5 milk market channel regulatory mechanisms (status quo, price gouging, supply control, fair share policy, and chain surplus return) are discussed and compared. The supply control mechanism was found the most effective at redistributing the chain surplus, associated with the sigmoid demand relationship for fluid milk, to dairy farmers. However, this option is unlikely to be politically acceptable in the United States. Second-best options for increasing dairy farmers' share of the consumers' dollar are the fair price policy and the chain surplus return. The former mechanism would distribute the chain surplus between retailers, processors, and farmers, whereas the latter would distribute it between consumers, retailers, and farmers. Remaining mechanisms would either transfer the chain surplus to retailers (status quo) or to consumers (price gouging).

The effect of passenger load on unstable vehicles in fatal, untripped rollover crashes.

PubMed Central

Whitfield, R A; Jones, I S

1995-01-01

Consumers may be unaware of the risk of rollover crashes posed by passenger loads in vehicles with poor roll stability. This analysis demonstrates that certain sports utility vehicles and small pickup trucks have designs that are so unstable that the weight of the passengers in the vehicle affects its propensity to roll over. This effect occurs even though the weight of the loaded vehicle is less than the manufacturer's gross vehicle weight rating. The risk of a fatal, "untripped" rollover crash in vehicles with low roll stability is increased as each passenger is added to the vehicle load. PMID:7661237

A Study of the Failure of Joints in Composite Material Fuel Cells Due to Hydraulic Ram Loading

DTIC Science & Technology

1976-06-01

H co PSw Z QW <H W CO 33 PS4 o CO O CM \\ Q> 00 vO m CO CM N ra Figure VI.B.l THICKNESS MODEL 55 it acts upon on the membrane, gives the force to be...ability of the joint to carry the loads created by hydraulic ram loading. It would also make the manufacturing procedure easier, less time consuming , and...70 less expensive. Cutting holes and channels in a composite plate not only alters the behavior and load carrying capa- bility of the plate, but it is

Commercial equipment loads: End-Use Load and Consumer Assessment Program (ELCAP)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pratt, R.G.; Williamson, M.A.; Richman, E.E.

1990-07-01

The Office of Energy Resources of the Bonneville Power Administration is generally responsible for the agency's power and conservation resource planning. As associated responsibility which supports a variety of office functions is the analysis of historical trends in and determinants of energy consumption. The Office of Energy Resources' End-Use Research Section operates a comprehensive data collection program to provide pertinent information to support demand-side planning, load forecasting, and demand-side program development and delivery. Part of this on-going program is known as the End-Use Load and Consumer Assessment Program (ELCAP), an effort designed to collect electricity usage data through direct monitoringmore » of end-use loads in buildings. This program is conducted for Bonneville by the Pacific Northwest Laboratory. This report provides detailed information on electricity consumption of miscellaneous equipment from the commercial portion of ELCAP. Miscellaneous equipment includes all commercial end-uses except heating, ventilating, air conditioning, and central lighting systems. Some examples of end-uses covered in this report are office equipment, computers, task lighting, refrigeration, and food preparation. Electricity consumption estimates, in kilowatt-hours per square food per year, are provided for each end-use by building type. The following types of buildings are covered: office, retail, restaurant, grocery, warehouse, school, university, and hotel/motel. 6 refs., 35 figs., 12 tabs.« less

The impact of capacity growth in national telecommunications networks.

PubMed

Lord, Andrew; Soppera, Andrea; Jacquet, Arnaud

2016-03-06

This paper discusses both UK-based and global Internet data bandwidth growth, beginning with historical data for the BT network. We examine the time variations in consumer behaviour and how this is statistically aggregated into larger traffic loads on national core fibre communications networks. The random nature of consumer Internet behaviour, where very few consumers require maximum bandwidth simultaneously, provides the opportunity for a significant statistical gain. The paper looks at predictions for how this growth might continue over the next 10-20 years, giving estimates for the amount of bandwidth that networks should support in the future. The paper then explains how national networks are designed to accommodate these traffic levels, and the various network roles, including access, metro and core, are described. The physical layer network is put into the context of how the packet and service layers are designed and the applications and location of content are also included in an overall network overview. The specific role of content servers in alleviating core network traffic loads is highlighted. The status of the relevant transmission technologies in the access, metro and core is given, showing that these technologies, with adequate research, should be sufficient to provide bandwidth for consumers in the next 10-20 years. © 2016 The Author(s).

A Randomized Trial about Glycemic Index and Glycemic Load Improves Outcomes among Adults with Type 2 Diabetes

ERIC Educational Resources Information Center

Miller, Carla K.; Gutschall, Melissa

2009-01-01

Glycemic index (GI) represents the postprandial glucose response of carbohydrate foods, and glycemic load (GL) represents the quantity and quality of carbohydrate consumed. A diet lower in GI and GL may improve diabetes management. A 9-week intervention regarding GI and GL was evaluated among adults in the age range of 40-70 years who had had type…

Optimal contrast elastic lidar sensing of clear and aerosol-loaded atmosphere

NASA Astrophysics Data System (ADS)

Evgenieva, Tsvetina T.; Gurdev, Ljuan L.

2016-01-01

The sensing laser radiation wavelength is one of the most significant factors conditioning the elastic lidar efficiency. Nevertheless, its role in the process of lidar sensing has not been investigated systematically so far. Therefore, the main purpose of the present work is to develop and perform an initial examination of an approach to solve this problem based on modeling the profile of the lidar return signal (the lidar profile) and evaluating, in a specific way, the corresponding profile of the measurement signal-to-noise ratio (SNR). The measurement fluctuations are considered as mainly due to the Poisson shot noise that is intrinsic to the dark current and the photocurrent induced by the useful signal itself and the atmospheric background. The initial results obtained show for instance that for ground-based lidar facilities the maximum Rayleigh return signal is obtainable at wavelengths about 350nm. The roles are changed when sensing clouds using wavelength from 400nm to 1000-2000nm. Then, the longer wavelengths provide higher return power from clouds, and the effect is magnified in aerosol-loaded (and especially hazy) atmosphere. The results of such investigations are useful when selecting optimal lidar-design characteristics ensuring maximum brightness and contrast of the lidar-acquired images of specific aerosol strata and objects in the atmosphere.

Factors Associated With Civilian Employment, Work Satisfaction, and Performance Among National Guard Members.

PubMed

Nelson, C Beau; Zivin, Kara; Walters, Heather; Ganoczy, Dara; MacDermid Wadsworth, Shelley; Valenstein, Marcia

2015-12-01

Employment is a vital part of the postdeployment return to civilian life. This study investigated factors associated with employment-related outcomes (employment status, self-reported work performance, and self-reported work satisfaction) among National Guard members returning from Operation Enduring Freedom, Operation Iraqi Freedom, or Operation New Dawn deployments. The sample consisted of 1,151 National Guard service members who had returned from overseas deployments approximately six months earlier. Bivariate and multivariable analyses were performed to examine associations between predictors and employment-related outcome variables. Higher-risk alcohol use was associated with reduced odds of being employed as well as with lower ratings of work satisfaction, whereas psychiatric symptom load was associated with lower self-reported work performance and work satisfaction ratings. Perceived social resources were associated with higher self-reported work performance and work satisfaction, whereas better physical functioning was associated with better self-reported work performance. Policy makers and clinicians may need to consider and assess alcohol use among unemployed National Guard members. They may also need to consider psychiatric symptom load and physical functioning among employed service members who perceive poor work performance and have low work satisfaction. Further research is needed on causal links between these predictors and employment outcomes.

Mars rover sample return mission utilizing in situ production of the return propellants

NASA Technical Reports Server (NTRS)

Bruckner, A. P.; Nill, L.; Schubert, H.; Thill, B.; Warwick, R.

1993-01-01

This paper presents an unmanned Mars sample return mission that utilizes propellants manufactured in situ from the Martian atmosphere for the return trip. A key goal of the mission is to demonstrate the considerable benefits that can be realized through the use of indigenous resources and to test the viability of this approach as a precursor to manned missions to Mars. Two in situ propellant combinations, methane/oxygen and carbon monoxide/oxygen, are compared to imported terrestrial hydrogen/oxygen within a single mission architecture, using a single Earth launch vehicle. The mission is assumed to be launched from Earth in 2003. Upon reaching Mars, the landing vehicle aerobrakes, deploys a small satellite, and lands on the Martian surface. Once on the ground, the propellant production unit is activated, and the product gases are liquefied and stored in the empty tanks of the Earth Return Vehicle (ERV). Power for these activities is provided by a dynamic isotope power system. A semiautonomous rover, powered by the indigenous propellants, gathers between 25 and 30 kg of soil and rock samples which are loaded aboard the ERV for return to Earth. After a surface stay time of approximately 1.5 years, the ERV leaves Mars for the return voyage to Earth. When the vehicle reaches the vicinity of Earth, the sample return capsule detaches, and is captured and circularized in LEO via aerobraking maneuvers.

Using and understanding consumer satisfaction to effect an improvement in mental health service delivery.

PubMed

Brunero, S; Lamont, S; Fairbrother, G

2009-04-01

Consumer satisfaction is today, widely accepted as a measure of the level and quality of service received by consumers. The aim of this survey-based study is to explore consumer satisfaction with quality of care, staff, environment and discharge in a south eastern Sydney adult acute inpatient mental health unit. A cross-sectional analysis is pursued in order to identify aspects of the patient stay, which form an associative relationship with an overall rating of consumer satisfaction on a 10-point scale. During the survey period, there were 182 discharges. Seventy questionnaires (38.5%) were returned from this group. The survey results highlight a number of areas of identified need, enabling the service to prioritize organizational systems around meeting these needs. Multiple regression analysis identified three items in the survey, which were independently significant associates of overall consumer satisfaction. They included being happy with the service provided by the consumer support worker, having support for services on discharge and feeling safe and secure on the ward. The model containing these three items accounted for 50% of the variation in overall satisfaction. Two primary interventions have been developed because survey administration which, it is hoped, will address issues raised in the survey. The interventions were the development of an admission and discharge pathway and a ward-based psychosocial intervention programme, which includes the involvement of consumer support workers.

'BEST MANAGEMENT PRACTICES' FOR SALINITY CONTROL IN GRAND VALLEY

EPA Science Inventory

A nontechnical summary of several research activities in the Grand Valley is given. Analyses of alternative measures of reducing the salt load originating from the Valley as a result of irrigation return flows are presented. These alternatives include conveyance channel linings, ...

Australian consumer perspectives, attitudes and behaviours on antibiotic use and antibiotic resistance: a qualitative study with implications for public health policy and practice.

PubMed

Lum, Elaine P M; Page, Katie; Nissen, Lisa; Doust, Jenny; Graves, Nicholas

2017-10-10

Consumers receive over 27 million antibiotic prescriptions annually in Australian primary healthcare. Hence, consumers are a key group to engage in the fight against antibiotic resistance. There is a paucity of research pertaining to consumers in the Australian healthcare environment. This study aimed to investigate the perspectives, attitudes and behaviours of Australian consumers on antibiotic use and antibiotic resistance, to inform national programs for reducing inappropriate antibiotic consumption. Semi-structured interviews with 32 consumers recruited via convenience and snowball sampling from a university population in South East Queensland. Interview transcripts were deductively and inductively coded. Main themes were identified using iterative thematic analysis. Three themes emerged from the analysis, to elucidate factors affecting antibiotic use: (a) prescription type; (b) consumer attitudes, behaviours, skills and knowledge; and (c) consumer engagement with antibiotic resistance. Consumers held mixed views regarding the use of delayed antibiotic prescriptions, and were often not made aware of the use of repeat antibiotic prescriptions. Consumers with regular general practitioners were more likely to have shared expectations regarding minimising the use of antibiotics. Even so, advice or information mediated by general practitioners was influential with all consumers; and helped to prevent inappropriate antibiotic use behaviours. Consumers were not aware of the free Return of Unwanted Medicines service offered by pharmacies and disposed of leftover antibiotics through household waste. To engage with mitigating antibiotic resistance, consumers required specific information. Previous public health campaigns raising awareness of antibiotics were largely not seen by this sample of consumers. Australian consumers have specific information needs regarding prescribed antibiotics to enable appropriate antibiotic use behaviours. Consumers also have expectations for high quality general practice consults conducted in a manner that increases consumer confidence in the treatment decision, regardless of whether an antibiotic is prescribed. To reduce inappropriate consumption of antibiotics and to more fully engage Australian consumers in mitigating antibiotic resistance, changes in health policy and practice are required.

Determination of Appropriate Content for a Clothing and Textiles Specialized Course. Final Report.

ERIC Educational Resources Information Center

Texas Tech Univ., Lubbock. Home Economics Instructional Materials Center.

A study was undertaken to obtain and analyze input from consumer and homemaking education teachers, students, and parents regarding desired content for a clothing and textiles semester course. Of the 1,200 questionnaires mailed to parents, teachers, and students throughout Texas, 327 were returned. Of these, 178 were teacher questionnaires, 84…

Income Tax Organizer. The CIRcular: Consumer Information Report 9.

ERIC Educational Resources Information Center

Bank of America NT & SA, San Francisco, CA.

Designed as an aid in preparing federal income tax returns, this report explains terms, provides a worksheet, and describes sources of tax help. The importance of keeping tax records is discussed along with strategies for recordkeeping, types of records to keep, and how long to keep them. Explanations of the following terms are provided along with…

Salmon returns and consumer fitness: growth and energy storage in stream-dwelling salmonids increases with spawning salmon abundance

USDA-ARS?s Scientific Manuscript database

We examined how biomass of marine-derived nutrients (MDN), in the form of spawning Pacific salmon, influenced the nutritional status and nitrogen stable isotope ratios (d15N) of stream-dwelling fishes. We sampled coho salmon (Oncorhynchus kisutch) parr and juvenile Dolly Varden (Salvelinus malma) d...

The effects of acute stress and perceptual load on distractor interference.

PubMed

Sato, Hirotsune; Takenaka, Ippei; Kawahara, Jun I

2012-01-01

Selective attention can be improved under conditions in which a high perceptual load is assumed to exhaust cognitive resources, leaving scarce resources for distractor processing. The present study examined whether perceptual load and acute stress share common attentional resources by manipulating perceptual and stress loads. Participants identified a target within an array of nontargets that were flanked by compatible or incompatible distractors. Attentional selectivity was measured by longer reaction times in response to the incompatible than to the compatible distractors. Participants in the stress group participated in a speech test that increased anxiety and threatened self-esteem. The effect of perceptual load interacted with the stress manipulation in that participants in the control group demonstrated an interference effect under the low perceptual load condition, whereas such interference disappeared under the high perceptual load condition. Importantly, the stress group showed virtually no interference under the low perceptual load condition, whereas substantial interference occurred under the high perceptual load condition. These results suggest that perceptual and stress related demands consume the same attentional resources.

Short term load forecasting of anomalous load using hybrid soft computing methods

NASA Astrophysics Data System (ADS)

Rasyid, S. A.; Abdullah, A. G.; Mulyadi, Y.

2016-04-01

Load forecast accuracy will have an impact on the generation cost is more economical. The use of electrical energy by consumers on holiday, show the tendency of the load patterns are not identical, it is different from the pattern of the load on a normal day. It is then defined as a anomalous load. In this paper, the method of hybrid ANN-Particle Swarm proposed to improve the accuracy of anomalous load forecasting that often occur on holidays. The proposed methodology has been used to forecast the half-hourly electricity demand for power systems in the Indonesia National Electricity Market in West Java region. Experiments were conducted by testing various of learning rate and learning data input. Performance of this methodology will be validated with real data from the national of electricity company. The result of observations show that the proposed formula is very effective to short-term load forecasting in the case of anomalous load. Hybrid ANN-Swarm Particle relatively simple and easy as a analysis tool by engineers.

Field programmable gate array processing of eye-safe all-fiber coherent wind Doppler lidar return signals

NASA Astrophysics Data System (ADS)

Abdelazim, S.; Santoro, D.; Arend, M.; Moshary, F.; Ahmed, S.

2011-11-01

A field deployable all-fiber eye-safe Coherent Doppler LIDAR is being developed at the Optical Remote Sensing Lab at the City College of New York (CCNY) and is designed to monitor wind fields autonomously and continuously in urban settings. Data acquisition is accomplished by sampling lidar return signals at 400 MHz and performing onboard processing using field programmable gate arrays (FPGAs). The FPGA is programmed to accumulate signal information that is used to calculate the power spectrum of the atmospherically back scattered signal. The advantage of using FPGA is that signal processing will be performed at the hardware level, reducing the load on the host computer and allowing for 100% return signal processing. An experimental setup measured wind speeds at ranges of up to 3 km.

Lessons Learned from Stakeholder-Driven Modeling in the Western Lake Erie Basin

NASA Astrophysics Data System (ADS)

Muenich, R. L.; Read, J.; Vaccaro, L.; Kalcic, M. M.; Scavia, D.

2017-12-01

Lake Erie's history includes a great environmental success story. Recognizing the impact of high phosphorus loads from point sources, the United States and Canada 1972 Great Lakes Water Quality Agreement set load reduction targets to reduce algae blooms and hypoxia. The Lake responded quickly to those reductions and it was declared a success. However, since the mid-1990s, Lake Erie's algal blooms and hypoxia have returned, and this time with a dominant algae species that produces toxins. Return of the algal blooms and hypoxia is again driven by phosphorus loads, but this time a major source is the agriculturally-dominated Maumee River watershed that covers NW Ohio, NE Indiana, and SE Michigan, and the hypoxic extent has been shown to be driven by Maumee River loads plus those from the bi-national and multiple land-use St. Clair - Detroit River system. Stakeholders in the Lake Erie watershed have a long history of engagement with environmental policy, including modeling and monitoring efforts. This talk will focus on the application of interdisciplinary, stakeholder-driven modeling efforts aimed at understanding the primary phosphorus sources and potential pathways to reduce these sources and the resulting algal blooms and hypoxia in Lake Erie. We will discuss the challenges, such as engaging users with different goals, benefits to modeling, such as improvements in modeling data, and new research questions emerging from these modeling efforts that are driven by end-user needs.

Wide-Area Traffic Management for Cloud Services

DTIC Science & Technology

2012-04-01

performance prediction tools [11], which are usually load oblivious. Therefore, without information about link loads and capacities, a CDN may direct...powerful tool . DONAR allows its customers to dictate a replica’s (i) split weight, wi, the desired proportion of requests that a particular replica i...Diagnostic Tool (NDT) [100], which is used for the Federal Communication Commission’s Consumer Broadband Test, and NPAD [101]—are more closely integrated with

Simulating Turbulent Wind Fields for Offshore Turbines in Hurricane-Prone Regions (Poster)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guo, Y.; Damiani, R.; Musial, W.

Extreme wind load cases are one of the most important external conditions in the design of offshore wind turbines in hurricane prone regions. Furthermore, in these areas, the increase in load with storm return-period is higher than in extra-tropical regions. However, current standards have limited information on the appropriate models to simulate wind loads from hurricanes. This study investigates turbulent wind models for load analysis of offshore wind turbines subjected to hurricane conditions. Suggested extreme wind models in IEC 61400-3 and API/ABS (a widely-used standard in oil and gas industry) are investigated. The present study further examines the wind turbinemore » response subjected to Hurricane wind loads. Three-dimensional wind simulator, TurbSim, is modified to include the API wind model. Wind fields simulated using IEC and API wind models are used for an offshore wind turbine model established in FAST to calculate turbine loads and response.« less

The role of education in explaining racial/ethnic allostatic load differentials in the United States.

PubMed

Howard, Jeffrey T; Sparks, P Johnelle

2015-01-01

This study expands on earlier findings of racial/ethnic and education-allostatic load associations by assessing whether racial/ethnic differences in allostatic load persist across all levels of educational attainment. This study used data from four recent waves of the National Health and Nutrition Survey (NHANES). Results from this study suggest that allostatic load differs significantly by race/ethnicity and educational attainment overall, but that the race/ethnicity association is not consistent across education level. Analysis of interactions and education-stratified models suggest that allostatic load levels do not differ by race/ethnicity for individuals with low education; rather, the largest allostatic load differentials for Mexican Americans (p < .01) and non-Hispanic blacks (p < .001) are observed for individuals with a college degree or more. These findings add to the growing evidence that differences in socioeconomic opportunities by race/ethnicity are likely a consequence of differential returns to education, which contribute to higher stress burdens among minorities compared to non-Hispanic whites.

A Method for Modeling Household Occupant Behavior to Simulate Residential Energy Consumption

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Brandon J; Starke, Michael R; Abdelaziz, Omar

2014-01-01

This paper presents a statistical method for modeling the behavior of household occupants to estimate residential energy consumption. Using data gathered by the U.S. Census Bureau in the American Time Use Survey (ATUS), actions carried out by survey respondents are categorized into ten distinct activities. These activities are defined to correspond to the major energy consuming loads commonly found within the residential sector. Next, time varying minute resolution Markov chain based statistical models of different occupant types are developed. Using these behavioral models, individual occupants are simulated to show how an occupant interacts with the major residential energy consuming loadsmore » throughout the day. From these simulations, the minimum number of occupants, and consequently the minimum number of multiple occupant households, needing to be simulated to produce a statistically accurate representation of aggregate residential behavior can be determined. Finally, future work will involve the use of these occupant models along side residential load models to produce a high-resolution energy consumption profile and estimate the potential for demand response from residential loads.« less

Space Shuttle Crawler Transporter Truck Shoe Qualification Tests and Analyses for Return-to-Flight

NASA Technical Reports Server (NTRS)

Margasahayam, Ravi N.; Meyer, Karl A.; Burton, Roy C.; Gosselin, Armand M.

2005-01-01

A vital element to Launch Complex 39 (LC39) and NASA's Kennedy Space Center (KSC) mobile launch transfer operation is a 3 million kilogram behemoth known as the Crawler Transporter (CT). Built in the 1960's, two CT's have accumulated over 1700+ miles each and have been used for the Apollo and the Space Shuttle programs. Recent observation of fatigue cracks on the CT shoes led to a comprehensive engineering, structural and metallurgical evaluation to assess the root cause that necessitated procurement of over 1000 new shoes. This paper documents the completed dynamic and compression tests on the old and new shoes respectively, so as to certify them for Space Shuttle's return-to-flight (RTF). Measured strain data from the rollout tests was used to develop stress/loading spectra and static equivalent load for qualification testing of the new shoes. Additionally, finite element analysis (FEA) was used to conduct sensitivity analyses of various contact parameters and structural characteristics for acceptance of new shoes.

Three essays on the incentive structure of energy conservation programs

NASA Astrophysics Data System (ADS)

Okwelum, Edson Ogochukwu

This dissertation is comprised of three related essays examining the potential effectiveness of government energy efficiency programs from both the producer and consumer perspectives. The first chapter is based on a paper I coauthored with Corey Lang. In this manuscript, I address the question of whether strategic behavior by consumers could result in the erosion of energy savings in a demand response program. Understanding how the strategic behavior of consumers affects the net benefits from a demand response program has policy implications because of the increasing importance that demand response has come to play in utility load and reliability management during peak times. Using data from a large field experiment in California in 2007, we test the hypothesis that under a technology program, consumers' strategic behavior results in outcomes that are opposite what is obtainable under a program with price incentive or based of behavior. Chapter II is also an empirical study which explores how the preferences of consumers for large and heavy vehicles imposes costs on society in the form of external costs of accident. This chapter looks at how fleet changes in weight distribution due to corporate average fuel economy and consumer demand for heavier vehicles results in fatalities. It is important to understand how consumer behavior affects the accident rates so that one can obtain unbiased estimates of accident costs that go into benefit-cost analysis of the impact of regulations in automobiles. Chapter three addresses how unobserved heterogeneity and sorting affect the estimates of the consumer willingness to pay for reduction in future gasoline costs. This tradeoff is important to policy makers and manufactures because it could help explain why manufacturers fail to adopt technologies for which the fuel savings far outweigh the costs. The remainder of the abstract provides a more detailed outlines of the three essays. Chapter 1 explores strategic behavior by consumers in demand response programs. The chapter looks at how the confluences of consumer strategic behavior, technology and price incentives in demand response lead to conflicting outcomes. Demand response has become an important tool for utilities to manage load during peak periods. While the effects of demand response programs on peak load reductions are well studied and intuitive, assessments typically fail to recognize the potential for off-peak behavioral responses that may mitigate the total benefits of the program. Using smart meter consumption data on residential air conditioning units enrolled in a direct load control program, this paper examines changes in consumption prior to and after curtailment events. The manuscript rigorously estimates both peak and off peak changes in consumption to better understand net benefits of DR programs. We examine Pacific Gas and Electric's (PG&E) SmartAC program, which is designed to reduce peak cooling load by directly controlling air conditioning units of participants. Usually, program evaluation uses the availability of a control group to obtain unbiased estimates of program impacts. However, we do not have the luxury of a control group in our data. Instead we estimate unit-specific non-linear consumption models and then compare load on event days to predicted load. Importantly, we use data from the summer 2007 training period from a stratified random sample of 294 participating AC units. In contrast to subsequent summers and normal DR designs, during the training period curtailment days were called for many different temperature levels, not just the hottest days. This aspect means we are not predicting out of sample, and we can have greater confidence in our econometric evidence. Our methodology is validated by a falsification test in which we find no changes in consumption during peak or off-peak times on non-curtailment days that match the temperature and timing profile of actual curtailment days. Several key results emerge from this analysis. First, we confirm that the SmartAC program, like other DR and DLC programs, reduces peak load during event days. In this case, peak consumption was reduced 19% on average. However, we also find substantial increases in consumption in the hours preceding and the hours following an event by 8% and 7% respectively. Essentially, load is being displaced from peak to off-peak times. These behavioral changes mitigate the monetary benefits of the program by 41%. Chapter II addresses the question of how much accident risks would change if consumers who purchase larger, heavier vehicles of the existing fleet where to behave strategically given regulatory constraints imposed by corporate average fuel economy. The paper estimates both the risk of dying given a crash and the crash frequencies of different vehicles in the fleet. We use a unique data set that combines data from fatality analysis reporting system (FARS) and NASS General Estimates Systems. The estimation strategy used corrects for selection bias due to moral hazard problems. The two equations are estimated simultaneously using simulated maximum likelihood without the need for exclusion restrictions (Green 2003, 2007). This approach allows us to obtain estimates that are causal. One of the main issues that have been left unanswered in earlier works is the existence of Peltzman-type moral hazard problems and endogeneity of vehicle choice. In the presence of Peltzman-type moral hazard problems, drivers in heavier vehicles will find it advantageous to change their behavior in ways that have opposite effect to regulations. From a public policy perspective if increasing the weight of a vehicle increases the probability of its being involved in collisions, then we might be interested in more than the impact of heavier vehicles conditional on a crash occurring. We find that increasing the weight of any vehicle increases the probability of it being the heavier vehicle in a collision and the probability of it being involved in a fatal accident. The external costs translate to about 38 cents/gallon of gasoline. Chapter III explores how individual unobserved heterogeneity in tastes could lead to different customers sorting into different classes of fuel efficient vehicles and therefore affect estimates of consumer's ability to tradeoff vehicle costs and discounted future gasoline costs. The research question is important for several reasons. First, it is interesting from a theoretical basis if consumers make this trade off optimally. Many theoretical models in economics make the fundamental assumption that consumers equally weigh current and future events when making decisions today. However, plenty empirical and laboratory evidence conclude the contrary. Second, Regulatory Impact Analyses (RIA) of regulations on energy efficiency standards usually find that the benefits of these programs are in many times larger than the costs, with the fuel savings over the life of the vehicle accounting for the majority of the benefits. However, if fuel savings are large relative to costs, then the question is why are manufacturers not incorporating these technologies in their product offerings? Therefore understanding energy paradox is critical for evaluating the standards and regulations so that policy makers can identify baseline for assessment in cost-benefit analyses. In this paper, we contribute to the literature on Energy Paradox in Fuel Economy by providing empirical evidence that unobserved consumer heterogeneity could result in different consumers sorting into different classes of fuel efficient cars which results in consumers undervaluing fuel economy. Unlike existing literature in this topic, this paper accounts for sorting bias due unobserved heterogeneity by using a random coefficient logit with error components (Train and Winston 2007). We pair the random coefficient discrete choice model with a supply side model in which firms compete in Bertrand Nash fashion where price depends on elasticity of demand and marginal costs. With the random utility model, we can allow taste to vary across consumers. We treat the discounted operating costs and vehicle costs as random variables. We find that a substantial portion of upper the 95% of households in our sample correctly value fuel economy (61%) as they are willing to pay 0.99 to reduce obtain a 1.00 discounted future gasoline costs over the lifetime of the vehicle. And 29% of the upper 95% overvalue fuel economy as they are willing to pay $1.57. These results are in contrast to those reported elsewhere by Alcott and Wozny (2009) but support results from the simulation study by Bento et al 2012 who find that not accounting for sorting bias and consumer heterogeneity could lead to a conclusion that consumers undervalue fuel economy.

Concept Study For A Near-term Mars Surface Sample Return Mission

NASA Astrophysics Data System (ADS)

Smith, M. F.; Thatcher, J.; Sallaberger, C.; Reedman, T.; Pillinger, C. T.; Sims, M. R.

The return of samples from the surface of Mars is a challenging problem. Present mission planning is for complex missions to return large, focused samples sometime in the next decade. There is, however, much scientific merit in returning a small sample of Martian regolith before the end of this decade at a fraction of the cost of the more ambitious missions. This paper sets out the key elements of this concept that builds on the work of the Beagle 2 project and space robotics work in Canada. The paper will expand the science case for returning a regolith sample that is only in the range of 50-250g but would nevertheless include plenty of interesting mate- rial as the regolith comprises soil grains from a wide variety of locations i.e. nearby rocks, sedimentary formations and materials moved by fluids, winds and impacts. It is possible that a fine core sample could also be extracted and returned. The mission concept is to send a lander sized at around 130kg on the 2007 or 2009 opportunity, immediately collect the sample from the surface, launch it to Mars orbit, collect it by the lander parent craft and make an immediate Earth return. Return to Earth orbit is envisaged rather than direct Earth re-entry. The lander concept is essen- tially a twice-size Beagle 2 carrying the sample collection and return capsule loading equipment plus the ascent vehicle. The return capsule is envisaged as no more than 1kg. An overall description of the mission along with methods for sample acquisition, or- bital rendezvous and capsule return will be outlined and the overall systems budgets presented. To demonstrate the near term feasibility of the mission, the use of existing Canadian and European technologies will be highlighted.

A piezoelectric shock-loading response simulator for piezoelectric-based device developers

NASA Astrophysics Data System (ADS)

Rastegar, J.; Feng, Z.

2017-04-01

Pulsed loading of piezoelectric transducers occurs in many applications, such as those in munitions firing, or when a mechanical system is subjected to impact type loading. In this paper, an electronic simulator that can be programmed to generate electrical charges that a piezoelectric transducer generates as it is subjected to various shock loading profiles is presented. The piezoelectric output simulator can provide close to realistic outputs so that the circuit designer can use it to test the developed system under close to realistic conditions without the need for the costly and time consuming process of performing actual tests. The design of the electronic simulator and results of its testing are presented.

Fruit load induces changes in global gene expression and in abscisic acid (ABA) and indole acetic acid (IAA) homeostasis in citrus buds.

PubMed

Shalom, Liron; Samuels, Sivan; Zur, Naftali; Shlizerman, Lyudmila; Doron-Faigenboim, Adi; Blumwald, Eduardo; Sadka, Avi

2014-07-01

Many fruit trees undergo cycles of heavy fruit load (ON-Crop) in one year, followed by low fruit load (OFF-Crop) the following year, a phenomenon known as alternate bearing (AB). The mechanism by which fruit load affects flowering induction during the following year (return bloom) is still unclear. Although not proven, it is commonly accepted that the fruit or an organ which senses fruit presence generates an inhibitory signal that moves into the bud and inhibits apical meristem transition. Indeed, fruit removal from ON-Crop trees (de-fruiting) induces return bloom. Identification of regulatory or metabolic processes modified in the bud in association with altered fruit load might shed light on the nature of the AB signalling process. The bud transcriptome of de-fruited citrus trees was compared with those of ON- and OFF-Crop trees. Fruit removal resulted in relatively rapid changes in global gene expression, including induction of photosynthetic genes and proteins. Altered regulatory mechanisms included abscisic acid (ABA) metabolism and auxin polar transport. Genes of ABA biosynthesis were induced; however, hormone analyses showed that the ABA level was reduced in OFF-Crop buds and in buds shortly following fruit removal. Additionally, genes associated with Ca(2+)-dependent auxin polar transport were remarkably induced in buds of OFF-Crop and de-fruited trees. Hormone analyses showed that auxin levels were reduced in these buds as compared with ON-Crop buds. In view of the auxin transport autoinhibition theory, the possibility that auxin distribution plays a role in determining bud fate is discussed. © The Author 2014. Published by Oxford University Press on behalf of the Society for Experimental Biology.

Expression Profiling of FLOWERING LOCUS T-Like Gene in Alternate Bearing ‘Hass' Avocado Trees Suggests a Role for PaFT in Avocado Flower Induction

PubMed Central

Ziv, Dafna; Zviran, Tali; Zezak, Oshrat; Samach, Alon; Irihimovitch, Vered

2014-01-01

In many perennials, heavy fruit load on a shoot decreases the ability of the plant to undergo floral induction in the following spring, resulting in a pattern of crop production known as alternate bearing. Here, we studied the effects of fruit load on floral determination in ‘Hass' avocado (Persea americana). De-fruiting experiments initially confirmed the negative effects of fruit load on return to flowering. Next, we isolated a FLOWERING LOCUS T-like gene, PaFT, hypothesized to act as a phloem-mobile florigen signal and examined its expression profile in shoot tissues of on (fully loaded) and off (fruit-lacking) trees. Expression analyses revealed a strong peak in PaFT transcript levels in leaves of off trees from the end of October through November, followed by a return to starting levels. Moreover and concomitant with inflorescence development, only off buds displayed up-regulation of the floral identity transcripts PaAP1 and PaLFY, with significant variation being detected from October and November, respectively. Furthermore, a parallel microscopic study of off apical buds revealed the presence of secondary inflorescence axis structures that only appeared towards the end of November. Finally, ectopic expression of PaFT in Arabidopsis resulted in early flowering transition. Together, our data suggests a link between increased PaFT expression observed during late autumn and avocado flower induction. Furthermore, our results also imply that, as in the case of other crop trees, fruit-load might affect flowering by repressing the expression of PaFT in the leaves. Possible mechanism(s) by which fruit crop might repress PaFT expression, are discussed. PMID:25330324

Expression profiling of FLOWERING LOCUS T-like gene in alternate bearing 'Hass' avocado trees suggests a role for PaFT in avocado flower induction.

PubMed

Ziv, Dafna; Zviran, Tali; Zezak, Oshrat; Samach, Alon; Irihimovitch, Vered

2014-01-01

In many perennials, heavy fruit load on a shoot decreases the ability of the plant to undergo floral induction in the following spring, resulting in a pattern of crop production known as alternate bearing. Here, we studied the effects of fruit load on floral determination in 'Hass' avocado (Persea americana). De-fruiting experiments initially confirmed the negative effects of fruit load on return to flowering. Next, we isolated a FLOWERING LOCUS T-like gene, PaFT, hypothesized to act as a phloem-mobile florigen signal and examined its expression profile in shoot tissues of on (fully loaded) and off (fruit-lacking) trees. Expression analyses revealed a strong peak in PaFT transcript levels in leaves of off trees from the end of October through November, followed by a return to starting levels. Moreover and concomitant with inflorescence development, only off buds displayed up-regulation of the floral identity transcripts PaAP1 and PaLFY, with significant variation being detected from October and November, respectively. Furthermore, a parallel microscopic study of off apical buds revealed the presence of secondary inflorescence axis structures that only appeared towards the end of November. Finally, ectopic expression of PaFT in Arabidopsis resulted in early flowering transition. Together, our data suggests a link between increased PaFT expression observed during late autumn and avocado flower induction. Furthermore, our results also imply that, as in the case of other crop trees, fruit-load might affect flowering by repressing the expression of PaFT in the leaves. Possible mechanism(s) by which fruit crop might repress PaFT expression, are discussed.

Three-dimensional effects for radio frequency antenna modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carter, M.D.; Batchelor, D.B.; Stallings, D.C.

1993-09-01

Electromagnetic field calculations for radio frequency (rf) antennas in two dimensions (2-D) neglect finite antenna length effects as well as the feeders leading to the main current strap. Comparisons with experiments indicate that these 2-D calculations can overestimate the loading of the antenna and fail to give the correct reactive behavior. To study the validity of the 2-D approximation, the Multiple Antenna Implementation System (MAntIS) has been used to perform 3-D modeling of the power spectrum, plasma loading, and inductance for a relevant loop antenna design. Effects on antenna performance caused by feeders to the main current strap, conducting sidewalls,more » and finite phase velocity are considered. The plasma impedance matrix for the loading calculation is generated by use of the ORION-1D code. The 3-D model is benchmarked with the 2-D model in the 2-D limit. For finite-length antennas, inductance calculations are found to be in much more reasonable agreement with experiments for 3-D modeling than for the 2-D estimates. The modeling shows that the feeders affect the launched power spectrum in an indirect way by forcing the driven rf current to return in the antenna sidewalls rather than in the plasma as in the 2-D model. Thus, the feeders have much more influence than the plasma on the currents that return in the sidewall. It has also been found that poloidal dependencies in the plasma impedance matrix can reduce the loading from that predicted in the 2-D model. For some plasma parameters, the combined 3-D effects can lead to a reduction in the predicted loading by as much as a factor of 2 from that given by the 2-D model.« less

Measuring Return on Investment for Professional Development Activities: Implications for Practice.

PubMed

Opperman, Cathleen; Liebig, Debra; Bowling, Judith; Johnson, Carol Susan; Harper, Mary

2016-01-01

What is the return on investment (ROI) for the time and resources spent for professional development activities? This is Part 2 of a two-part series to report findings and demonstrate how financial analysis of educational activities can drive decision-making. The resources consumed for professional development activities need to be identified and quantified to be able to determine the worth of such activities. This article defines terms and formulas for financial analysis for nursing professional development practitioners to use in analysis of their own programs. Three fictitious examples of common nursing professional development learning activities are provided with financial analysis. This article presents the "how to" for the busy practitioner.

Water-use information for California

USGS Publications Warehouse

Templin, W.E.

1986-01-01

This pamphlet reports on the availability of water use information to and for the state of California, through the development of the State Water-Use Data System (SWUDS). SWUDS is currently organized into 12 water use categories: Agricultural non-irrigation; Commercial; Domestic; Industrial; Irrigation; Mining; Power generation--fossil fuel, geothermal, hydroelectric , nuclear; Sewage treatment; and Water supply. The information needs of this system include type of water use (by category); name of water user; location of water use (latitude/longitude, county, and hydrologic unit--drainage basin); sources of water supply and return (fresh, saline, or reclaimed surface or groundwater); volume of water withdrawn, delivered, consumed, released, and returned; and period of water use (month, year). (Lantz-PTT)

A Bivariate return period for levee failure monitoring

NASA Astrophysics Data System (ADS)

Isola, M.; Caporali, E.

2017-12-01

Levee breaches are strongly linked with the interaction processes among water, soil and structure, thus many are the factors that affect the breach development. One of the main is the hydraulic load, characterized by intensity and duration, i.e. by the flood event hydrograph. On the magnitude of the hydraulic load is based the levee design, generally without considering the fatigue failure due to the load duration. Moreover, many are the cases in which the levee breach are characterized by flood of magnitude lower than the design one. In order to implement the strategies of flood risk management, we built here a procedure based on a multivariate statistical analysis of flood peak and volume together with the analysis of the past levee failure events. Particularly, in order to define the probability of occurrence of the hydraulic load on a levee, a bivariate copula model is used to obtain the bivariate joint distribution of flood peak and volume. Flood peak is the expression of the load magnitude, while the volume is the expression of the stress over time. We consider the annual flood peak and the relative volume. The volume is given by the hydrograph area between the beginning and the end of event. The beginning of the event is identified as an abrupt rise of the discharge by more than 20%. The end is identified as the point from which the receding limb is characterized by the baseflow, using a nonlinear reservoir algorithm as baseflow separation technique. By this, with the aim to define warning thresholds we consider the past levee failure events and the relative bivariate return period (BTr) compared with the estimation of a traditional univariate model. The discharge data of 30 hydrometric stations of Arno River in Tuscany, Italy, in the period 1995-2016 are analysed. The database of levee failure events, considering for each event the location as well as the failure mode, is also created. The events were registered in the period 2000-2014 by EEA-Europe Environment Agency, the Italian Civil Protection and ISPRA (the Italian National Institute for Environmental Protection and Research). Only two levee failures events occurred in the sub-basin of Era River have been detected and analysed. The estimated return period with the univariate model of flood peak is greater than 2 and 5 years while the BTr is greater of 25 and 30 years respectively.

Managing time-substitutable electricity usage using dynamic controls

DOEpatents

Ghosh, Soumyadip; Hosking, Jonathan R.; Natarajan, Ramesh; Subramaniam, Shivaram; Zhang, Xiaoxuan

2017-02-07

A predictive-control approach allows an electricity provider to monitor and proactively manage peak and off-peak residential intra-day electricity usage in an emerging smart energy grid using time-dependent dynamic pricing incentives. The daily load is modeled as time-shifted, but cost-differentiated and substitutable, copies of the continuously-consumed electricity resource, and a consumer-choice prediction model is constructed to forecast the corresponding intra-day shares of total daily load according to this model. This is embedded within an optimization framework for managing the daily electricity usage. A series of transformations are employed, including the reformulation-linearization technique (RLT) to obtain a Mixed-Integer Programming (MIP) model representation of the resulting nonlinear optimization problem. In addition, various regulatory and pricing constraints are incorporated in conjunction with the specified profit and capacity utilization objectives.

Managing time-substitutable electricity usage using dynamic controls

DOEpatents

Ghosh, Soumyadip; Hosking, Jonathan R.; Natarajan, Ramesh; Subramaniam, Shivaram; Zhang, Xiaoxuan

2017-02-21

A predictive-control approach allows an electricity provider to monitor and proactively manage peak and off-peak residential intra-day electricity usage in an emerging smart energy grid using time-dependent dynamic pricing incentives. The daily load is modeled as time-shifted, but cost-differentiated and substitutable, copies of the continuously-consumed electricity resource, and a consumer-choice prediction model is constructed to forecast the corresponding intra-day shares of total daily load according to this model. This is embedded within an optimization framework for managing the daily electricity usage. A series of transformations are employed, including the reformulation-linearization technique (RLT) to obtain a Mixed-Integer Programming (MIP) model representation of the resulting nonlinear optimization problem. In addition, various regulatory and pricing constraints are incorporated in conjunction with the specified profit and capacity utilization objectives.

Degradable polyphosphoester-based silver-loaded nanoparticles as therapeutics for bacterial lung infections

NASA Astrophysics Data System (ADS)

Zhang, Fuwu; Smolen, Justin A.; Zhang, Shiyi; Li, Richen; Shah, Parth N.; Cho, Sangho; Wang, Hai; Raymond, Jeffery E.; Cannon, Carolyn L.; Wooley, Karen L.

2015-01-01

In this study, a new type of degradable polyphosphoester-based polymeric nanoparticle, capable of carrying silver cations via interactions with alkyne groups, has been developed as a potentially effective and safe treatment for lung infections. It was found that up to 15% (w/w) silver loading into the nanoparticles could be achieved, consuming most of the pendant alkyne groups along the backbone, as revealed by Raman spectroscopy. The well-defined Ag-loaded nanoparticles released silver in a controlled and sustained manner over 5 days, and displayed enhanced in vitro antibacterial activities against cystic fibrosis-associated pathogens and decreased cytotoxicity to human bronchial epithelial cells, in comparison to silver acetate.In this study, a new type of degradable polyphosphoester-based polymeric nanoparticle, capable of carrying silver cations via interactions with alkyne groups, has been developed as a potentially effective and safe treatment for lung infections. It was found that up to 15% (w/w) silver loading into the nanoparticles could be achieved, consuming most of the pendant alkyne groups along the backbone, as revealed by Raman spectroscopy. The well-defined Ag-loaded nanoparticles released silver in a controlled and sustained manner over 5 days, and displayed enhanced in vitro antibacterial activities against cystic fibrosis-associated pathogens and decreased cytotoxicity to human bronchial epithelial cells, in comparison to silver acetate. Electronic supplementary information (ESI) available: Materials, experimental details, and characterization. See DOI: 10.1039/c4nr07103d

A Sample Return Container with Hermetic Seal

NASA Technical Reports Server (NTRS)

Kong, Kin Yuen; Rafeek, Shaheed; Sadick, Shazad; Porter, Christopher C.

2000-01-01

A sample return container is being developed by Honeybee Robotics to receive samples from a derivative of the Champollion/ST4 Sample Acquisition and Transfer Mechanism or other samplers and then hermetically seal samples for a sample return mission. The container is enclosed in a phase change material (PCM) chamber to prevent phase change during return and re-entry to earth. This container is designed to operate passively with no motors and actuators. Using the sampler's featured drill tip for interfacing, transfer-ring and sealing samples, the container consumes no electrical power and therefore minimizes sample temperature change. The circular container houses a few isolated canisters, which will be sealed individually for samples acquired from different sites or depths. The drill based sampler indexes each canister to the sample transfer position, below the index interface for sample transfer. After sample transfer is completed, the sampler indexes a seal carrier, which lines up seals with the openings of the canisters. The sampler moves to the sealing interface and seals the sample canisters one by one. The sealing interface can be designed to work with C-seals, knife edge seals and cup seals. Again, the sampler provides all sealing actuation. This sample return container and co-engineered sample acquisition system are being developed by Honeybee Robotics in collaboration with the JPL Exploration Technology program.

Population age structure and asset returns: an empirical investigation.

PubMed

Poterba, J M

1998-10-01

"This paper investigates the association between population age structure, particularly the share of the population in the 'prime saving years' 45-60, and the returns on stocks and bonds. The paper is motivated by the claim that the aging of the 'Baby Boom' cohort in the United States is a key factor in explaining the recent rise in asset values. It also addresses the associated claim that asset prices will decline when this large cohort reaches retirement age and begins to reduce its asset holdings. This paper begins by considering household age-asset accumulation profiles. Data from the Survey of Consumer Finances suggest that while cross-sectional age-wealth profiles peak for households in their early 60s, cohort data on the asset ownership of the same households show a much less pronounced peak.... The paper then considers the historical relationship between demographic structure and real returns on Treasury bills, long-term government bonds, and corporate stock. The results do not suggest any robust relationship between demographic structure and asset returns.... The paper concludes by discussing factors such as international capital flows and forward-looking behavior on the part of market participants that could weaken the relationship between age structure and asset returns in a single nation." excerpt

Fracture Behavior of Zr-BASED Bulk Metallic Glass Under Impact Loading

NASA Astrophysics Data System (ADS)

Shin, Hyung-Seop; Kim, Ki-Hyun; Oh, Sang-Yeob

The fracture behavior of a Zr-based bulk amorphous metal under impact loading using subsize V-shaped Charpy specimens was investigated. Influences of loading rate on the fracture behavior of amorphous Zr-Al-Ni-Cu alloy were examined. As a result, the maximum load and absorbed fracture energy under impact loading were lower than those under quasi-static loading. A large part of the absorbed fracture energy in the Zr-based BMG was consumed in the process for crack initiation and not for crack propagation. In addition, fractographic characteristics of BMGs, especially the initiation and development of shear bands at the notch tip were investigated. Fractured surfaces under impact loading are smoother than those under quasi-static loading. The absorbed fracture energy appeared differently depending on the appearance of the shear bands developed. It can be found that the fracture energy and fracture toughness of Zr-based BMG are closely related with the extent of shear bands developed during fracture.

Effects of state recovery on creep buckling under variable loading

NASA Technical Reports Server (NTRS)

Robinson, D. N.; Arnold, S. M.

1986-01-01

Structural alloys embody internal mechanisms that allow recovery of state with varying stress and elevated temperature, i.e., they can return to a softer state following periods of hardening. Such material behavior is known to strongly influence structural response under some important thermomechanical loadings, for example, that involving thermal ratchetting. The influence of dynamic and thermal recovery on the creep buckling of a column under variable loading is investigated. The column is taken as the idealized (Shanley) sandwich column. The constitutive model, unlike the commonly employed Norton creep model, incorporates a representation of both dynamic and thermal (state) recovery. The material parameters of the constitutive model are chosen to characterize Narloy Z, a representative copper alloy used in thrust nozzle liners of reusable rocket engines. Variable loading histories include rapid cyclic unloading/reloading sequences and intermittent reductions of load for extended periods of time; these are superimposed on a constant load. The calculated results show that state recovery significantly affects creep buckling under variable loading. Structural alloys embody internal mechanisms that allow recovery of state with varying stress and time.

Adaptive Management of Return Flows: Lessons from a Case Study in Environmental Water Delivery to a Floodplain River

NASA Astrophysics Data System (ADS)

Wolfenden, Benjamin J.; Wassens, Skye M.; Jenkins, Kim M.; Baldwin, Darren S.; Kobayashi, Tsuyoshi; Maguire, James

2018-03-01

For many floodplain rivers, reinstating wetland connectivity is necessary for ecosystems to recover from decades of regulation. Environmental return flows (the managed delivery of wetland water to an adjacent river) can be used strategically to facilitate natural ecosystem connectivity, enabling the transfer of nutrients, energy, and biota from wetland habitats to the river. Using an informal adaptive management framework, we delivered return flows from a forested wetland complex into a large lowland river in south-eastern Australia. We hypothesized that return flows would (a) increase river nutrient concentrations; (b) reduce wetland nutrient concentrations; (c) increase rates of ecosystem metabolism through the addition of potentially limiting nutrients, causing related increases in the concentration of water column chlorophyll-a; and (d) increase the density and species richness of microinvertebrates in riverine benthic habitats. Our monitoring results demonstrated a small increase in the concentrations of several key nutrients but no evidence for significant ecological responses was found. Although return flows can be delivered from forested floodplain areas without risking hypoxic blackwater events, returning nutrient and carbon-rich water to increase riverine productivity is limited by the achievable scale of return flows. Nevertheless, using return flows to flush carbon from floodplains may be a useful management tool to reduce carbon loads, preparing floodplains for subsequent releases (e.g., mitigating the risk of hypoxic blackwater events). In this example, adaptive management benefited from a semi-formal collaboration between science and management that allowed for prompt decision-making.

JPRS Report, China

DTIC Science & Technology

1989-04-06

relationship of all trades in the countryside. He said: the problem related to agriculture is in essence one of distribution of interests among all...of making use of foreign funds, and to curtail those home-oriented enterprises that consume and waste large amounts of resources and are poorly...in enterprises having greater decision making authority, and established a relationship between profits and losses and enterprises’ own returns

Brief Report: Consistency of Search Engine Rankings for Autism Websites

ERIC Educational Resources Information Center

Reichow, Brian; Naples, Adam; Steinhoff, Timothy; Halpern, Jason; Volkmar, Fred R.

2012-01-01

The World Wide Web is one of the most common methods used by parents to find information on autism spectrum disorders and most consumers find information through search engines such as Google or Bing. However, little is known about how the search engines operate or the consistency of the results that are returned over time. This study presents the…

VEG-03 Consmption Harvest no. 1

NASA Image and Video Library

2018-03-11

iss055e001536 (March 8, 2018) --- Expedition 55 Commander Anton Shkaplerov eats a piece of lettuce harvested as part of the ongoing space crop study VEG-03. The botany experiment uses the Veggie plant growth facility to cultivate a type of cabbage, lettuce and mizuna which are harvested on-orbit with some samples consumed by astronauts and others returned to Earth for testing.

VEG-03 Consumption Harvest no. 1

NASA Image and Video Library

2018-03-08

iss055e001193 (March 8, 2018) --- NASA astronaut Scott Tingle eats a piece of lettuce harvested as part of the ongoing space crop study VEG-03. The botany experiment uses the Veggie plant growth facility to cultivate a type of cabbage, lettuce and mizuna which are harvested on-orbit with some samples consumed by astronauts and others returned to Earth for testing.

Measuring Permeability of Composite Cryotank Laminants

NASA Technical Reports Server (NTRS)

Oliver, Stanley T.; Selvidge, Shawn; Watwood, Michael C.

2004-01-01

This paper describes a test method developed to identify whether certain materials and material systems are suitable candidates for large pressurized reusable cryogenic tanks intended for use in current and future manned launch systems. It provides a quick way to screen numerous candidate materials for permeability under anticipated loading environments consistent with flight conditions, as well as addressing reusability issues. cryogenic tank, where the major design issue was hydrogen permeability. It was successfully used to evaluate samples subjected to biaxial loading while maintaining test temperatures near liquid hydrogen. After each sample was thermally preconditioned, a cyclic pressure load was applied to simulate the in-plane strain. First permeability was measured while a sample was under load. Then the sample was unloaded and allowed to return to ambient temperature. The test was repeated to simulate reusability, in order to evaluate its effects on material permeability.

Structure and Properties of High Symmetry Composites

DTIC Science & Technology

1990-07-27

acceleration in the y-direction 21-30 GRAVI(3) Gravitational acceleration in the z-direction 31-40 ANVEL Angular velocity (referred to the z axis) (i... ANVEL WIE(6,913) GRAVI(1),GRAVI(2).GRAVI(3), ANVEL 71 ORMAT(//41H X-GRAVITY V-GRAVITY Z-GRAVITY ANG VEL 1 W1 FRIAT5IO) Page 17 CALL CHECK 1(NDtJFNq, ELEM...BLARG DO 30 IEVAB =1,NEVAS DO 30 I=1,3 BMATX(I, IEVAB) = BMATX(I. IEVAB)+BLARQ(I, IEVAB) RETURN END SUBROUTINE LOADS SUBROUTINE LOADS( ANVEL , COORD

Return to Learn: A review of cognitive rest versus rehabilitation after sports concussion.

PubMed

Eastman, Amelia; Chang, Douglas G

2015-01-01

Cognitive rest is the recommendation for all patients with acute sports concussion. A comprehensive literature search was conducted for the research question "What is the optimal cognitive load for patients with a sports concussion?" Seven studies met the inclusion criteria. The optimal cognitive load for patients after sports concussion is yet to be determined. Additional controlled trials of cognitive rehabilitation are needed to establish best clinical practice. The authors suggest memory training, cognitive behavioral therapy, and environmental interventions as areas of future research for sports concussion injuries.

Handling of induced hypercalcaemia in hyperthyroidism

PubMed Central

Lim, P.; Jacob, E.; Khoo, O. T.

1969-01-01

The mean serum calcium of 13 hyperthyroid patients was found to be significantly higher than that of controls matched for sex and age, though none of the patients' values were outside the normal range. Nevertheless, these patients responded very promptly to hypercalcaemia (induced by an intravenous calcium load), and their serum calcium returned to normal much more rapidly compared with the matched controls. There was also increased retention of intravenous calcium load, possibly owing to increased calcitonin production. Calcium infusion may be useful in treating bone diseases in which increased bone resorption exceeds bone accretion. PMID:5354875

The Baetylus Theorem—the central disconnect driving consumer behavior and investment returns in Wearable Technologies

PubMed Central

Levine, James A.

2016-01-01

The Wearable Technology market may increase fivefold by the end of the decade. There is almost no academic investigation as to what drives the investment hypothesis in wearable technologies. This paper seeks to examine this issue from an evidence-based perspective. There is a fundamental disconnect in how consumers view wearable sensors and how companies market them; this is called The Baetylus Theorem where people believe (falsely) that by buying a wearable sensor they will receive health benefit; data suggest that this is not the case. This idea is grounded social constructs, psychological theories and marketing approaches. A marketing proposal that fails to recognize The Baetylus Theorem and how it can be integrated into a business offering has not optimized its competitive advantage. More importantly, consumers should not falsely believe that purchasing a wearable technology, improves health. PMID:27617162

The Baetylus Theorem-the central disconnect driving consumer behavior and investment returns in Wearable Technologies.

PubMed

Levine, James A

2016-08-01

The Wearable Technology market may increase fivefold by the end of the decade. There is almost no academic investigation as to what drives the investment hypothesis in wearable technologies. This paper seeks to examine this issue from an evidence-based perspective. There is a fundamental disconnect in how consumers view wearable sensors and how companies market them; this is called The Baetylus Theorem where people believe (falsely) that by buying a wearable sensor they will receive health benefit; data suggest that this is not the case. This idea is grounded social constructs, psychological theories and marketing approaches. A marketing proposal that fails to recognize The Baetylus Theorem and how it can be integrated into a business offering has not optimized its competitive advantage. More importantly, consumers should not falsely believe that purchasing a wearable technology, improves health.

Stochastic and Statistical Analysis of Utility Revenues and Weather Data Analysis for Consumer Demand Estimation in Smart Grids

PubMed Central

Ali, S. M.; Mehmood, C. A; Khan, B.; Jawad, M.; Farid, U; Jadoon, J. K.; Ali, M.; Tareen, N. K.; Usman, S.; Majid, M.; Anwar, S. M.

2016-01-01

In smart grid paradigm, the consumer demands are random and time-dependent, owning towards stochastic probabilities. The stochastically varying consumer demands have put the policy makers and supplying agencies in a demanding position for optimal generation management. The utility revenue functions are highly dependent on the consumer deterministic stochastic demand models. The sudden drifts in weather parameters effects the living standards of the consumers that in turn influence the power demands. Considering above, we analyzed stochastically and statistically the effect of random consumer demands on the fixed and variable revenues of the electrical utilities. Our work presented the Multi-Variate Gaussian Distribution Function (MVGDF) probabilistic model of the utility revenues with time-dependent consumer random demands. Moreover, the Gaussian probabilities outcome of the utility revenues is based on the varying consumer n demands data-pattern. Furthermore, Standard Monte Carlo (SMC) simulations are performed that validated the factor of accuracy in the aforesaid probabilistic demand-revenue model. We critically analyzed the effect of weather data parameters on consumer demands using correlation and multi-linear regression schemes. The statistical analysis of consumer demands provided a relationship between dependent (demand) and independent variables (weather data) for utility load management, generation control, and network expansion. PMID:27314229

Stochastic and Statistical Analysis of Utility Revenues and Weather Data Analysis for Consumer Demand Estimation in Smart Grids.

PubMed

Ali, S M; Mehmood, C A; Khan, B; Jawad, M; Farid, U; Jadoon, J K; Ali, M; Tareen, N K; Usman, S; Majid, M; Anwar, S M

2016-01-01

In smart grid paradigm, the consumer demands are random and time-dependent, owning towards stochastic probabilities. The stochastically varying consumer demands have put the policy makers and supplying agencies in a demanding position for optimal generation management. The utility revenue functions are highly dependent on the consumer deterministic stochastic demand models. The sudden drifts in weather parameters effects the living standards of the consumers that in turn influence the power demands. Considering above, we analyzed stochastically and statistically the effect of random consumer demands on the fixed and variable revenues of the electrical utilities. Our work presented the Multi-Variate Gaussian Distribution Function (MVGDF) probabilistic model of the utility revenues with time-dependent consumer random demands. Moreover, the Gaussian probabilities outcome of the utility revenues is based on the varying consumer n demands data-pattern. Furthermore, Standard Monte Carlo (SMC) simulations are performed that validated the factor of accuracy in the aforesaid probabilistic demand-revenue model. We critically analyzed the effect of weather data parameters on consumer demands using correlation and multi-linear regression schemes. The statistical analysis of consumer demands provided a relationship between dependent (demand) and independent variables (weather data) for utility load management, generation control, and network expansion.

The Effects of Money on Fake Rating Behavior in E-Commerce: Electrophysiological Time Course Evidence From Consumers.

PubMed

Wang, Cuicui; Li, Yun; Luo, Xuan; Ma, Qingguo; Fu, Weizhong; Fu, Huijian

2018-01-01

Online ratings impose significant effects on the behaviors of potential customers. Thus, online merchants try to adopt strategies that affect this rating behavior, and most of these strategies are connected to money, such as the strategies of returning cash coupons if a consumer gives a five-star rating (RI strategy, an acronym for "returning" and "if") or returning cash coupons directly with no additional requirements (RN strategy, an acronym for "returning" and "no"). The current study explored whether a certain strategy (RN or RI) was more likely to give rise to false rating behaviors, as assessed by event-related potentials. A two-stimulus paradigm was used in this experiment. The first stimulus (S1) was the picture of a product with four Chinese characters that reflected the product quality (slightly defective vs. seriously defective vs. not defective), and the second stimulus (S2) displayed the coupon strategy (RN or RI). The participants were asked to decide whether or not to give a five-star rating. The behavioral results showed that the RI strategy led to a higher rate of five-star ratings than the RN strategy. For the electrophysiological time courses, the N1, N2, and LPP components were evaluated. The slightly defective products elicited a larger amplitude of the N1 component than the seriously defective and not-defective products, reflecting that perceptual difficulty was associated with the processing of the slightly defective products. The RI strategy evoked a less negative N2 and a more positive LPP than the RN strategy, indicating that the subjects perceived less conflict and experienced stronger incentives when processing the RI strategy. These findings will benefit future studies of fake online comments and provide evidence supporting the policy of forbidding the use of the RI strategy in e-commerce.

Differences in cardiovascular risk profile based on relationship between post-load plasma glucose and fasting plasma levels.

PubMed

Succurro, Elena; Marini, Maria Adelaide; Grembiale, Alessandro; Lugarà, Marina; Andreozzi, Francesco; Sciacqua, Angela; Hribal, Marta Letizia; Lauro, Renato; Perticone, Francesco; Sesti, Giorgio

2009-05-01

It has been shown that subjects with normal glucose tolerance (NGT), whose plasma glucose (PG) levels do not return to their fasting PG level within 2 h during an oral glucose tolerance test (OGTT) (Group I), have a significantly higher risk to develop type 2 diabetes than NGT subjects whose 2-h glucose returns to, or drops below, the fasting level (Group I). However, it is still unsettled whether individuals in Group II have a more atherogenic profile than Group I subjects. To address this issue, we examined 266 non-diabetic offspring of type 2 diabetic patients, recruited in the context of EUGENE2 cross-sectional study. All subjects underwent an euglycaemic-hyperinsulinemic clamp to assess glucose tolerance and insulin sensitivity. Furthermore, cardiovascular risk factors and ultrasound measurement of carotid intima-media thickness (IMT) were evaluated. Individuals in Group II exhibited significantly higher waist circumference, blood pressure, triglycerides, 2-h post-load PG, hsC-reactive protein, interleukin-6, insulin-like growth factor-1 (IGF-1), IMT, and lower insulin sensitivity than subjects in Group I. Subjects with NGT, whose PG concentration does not return to their fasting PG level within 2 h during OGTT, have an atherogenic profile, suggesting that performing OGTT with measurement of PG every 30 min may be useful to assess the risk for cardiovascular disease in glucose-tolerant subjects.

A questions-based investigation of consumer mental-health information.

PubMed

Crangle, Colleen E; Kart, Joyce Brothers

2015-01-01

Despite the wealth of mental-health information available online to consumers, research has shown that the mental-health information needs of consumers are not being met. This study contributes to that research by soliciting consumer questions directly, categorizing them, analyzing their form, and assessing the extent to which they can be answered from a trusted and vetted source of online information, namely the website of the US National Institute of Mental Health (NIMH). As an alternative to surveys and analyses of online activity, this study shows how consumer questions provide new insight into what consumers do not know and how they express their information needs. The study crowdsourced 100 consumer questions through Amazon Inc.'s Mechanical Turk. Categorization of the questions shows broad agreement with earlier studies in terms of the content of consumer questions. It also suggests that consumers' grasp of mental health issues may be low compared to other health topics. The majority of the questions (74%) were simple in form, with the remainder being multi-part, multifaceted or narrative. Even simple-form questions could, however, have complex interpretations. Fifty four questions were submitted to the search box at the NIMH website. For 32 questions, no answer could be found in the top one to three documents returned. Inadequacies in the search and retrieval technology deployed at websites account for some of the failure to find answers. The nature of consumer questions in mental health also plays a role. A question that has a false presupposition is less likely to have an answer in trusted and vetted sources of information. Consumer questions are also expressed with a degree of specificity that makes the retrieval of relevant information difficult. The significance of this study is that it shows what an analysis of consumer mental-health questions can tell us about consumer information needs and it provides new insight into the difficulties facing consumers looking for answers to their questions in online resources.

The case for Mars: Concept development for a Mars research station

NASA Technical Reports Server (NTRS)

Welch, S. M. (Editor); Stoker, C. R. (Editor)

1986-01-01

A program to establish a permanent scientific research base on Mars is described. A Mars base as the much needed long-term focus for the space program is presented. A permanent base was chosen rather than the more conventional concept of a series of individual missions to different sites because the permanent base offers much greater scientific return plus greater crew safety and the potential for eventual growth into a settlement. The Mars base will strive for self-sufficiency and autonomy from Earth. Martian resources will be used to provide life support materials and consumables. The Martian atmosphere will provide a convenient source of volatiles: CO2, N2, and water. Rocket propellant (for returning vehicles), fuels, breathable air, and fertilizers will be manufactured from Mars air. Food will be grown on Mars using Martian materials as plant nutrients. A permanent human presence will be maintained on Mars beginning with the first manned landing via a strategy of crew overlap. This permanent presence will ensure safety and reliability of systems through continuous tending, maintenance, and expansion of the base's equipment and systems. A permanent base will allow the development of a substantial facility on Mars for the same cost (in terms of Earth departure mass) as a series of temporary camps. A base equipped with surface rovers, airplanes, and the ability to manufacture consumables and return propellant will allow far more extensive planetary exploration over a given period of years than would approaches featuring a series of short exploration missions such as the Apollo Moon program.

The case for Mars: Concept development for a Mars research station

NASA Astrophysics Data System (ADS)

Welch, S. M.; Stoker, C. R.

1986-04-01

A program to establish a permanent scientific research base on Mars is described. A Mars base as the much needed long-term focus for the space program is presented. A permanent base was chosen rather than the more conventional concept of a series of individual missions to different sites because the permanent base offers much greater scientific return plus greater crew safety and the potential for eventual growth into a settlement. The Mars base will strive for self-sufficiency and autonomy from Earth. Martian resources will be used to provide life support materials and consumables. The Martian atmosphere will provide a convenient source of volatiles: CO2, N2, and water. Rocket propellant (for returning vehicles), fuels, breathable air, and fertilizers will be manufactured from Mars air. Food will be grown on Mars using Martian materials as plant nutrients. A permanent human presence will be maintained on Mars beginning with the first manned landing via a strategy of crew overlap. This permanent presence will ensure safety and reliability of systems through continuous tending, maintenance, and expansion of the base's equipment and systems. A permanent base will allow the development of a substantial facility on Mars for the same cost (in terms of Earth departure mass) as a series of temporary camps. A base equipped with surface rovers, airplanes, and the ability to manufacture consumables and return propellant will allow far more extensive planetary exploration over a given period of years than would approaches featuring a series of short exploration missions such as the Apollo Moon program.

29 CFR 551.8 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... as picking up and returning the delivery vehicle at the beginning and end of the workday, cleaning... in loading or unloading the goods, and picking up empty containers or other goods from customers for... local deliveries. (f) A plan of compensation on the basis of trip rates or other delivery payment plan...

Problems of Excess Capacity

NASA Technical Reports Server (NTRS)

Douglas, G.

1972-01-01

The problems of excess capacity in the airline industry are discussed with focus on the following topics: load factors; fair rate of return on investment; service-quality rivalry among airlines; pricing (fare) policies; aircraft production; and the impacts of excess capacity on operating costs. Also included is a discussion of the interrelationships among these topics.

Financial Planning Strategies for Senior Military Officers.

DTIC Science & Technology

1986-05-15

being offered has declined significantly. In that preferred shares are a sort of hybrid of common stocks and bonds. they offer a middle of the road...2. Total return no-load mutual funds should be your first consideraticn in selectirg an investment veiclE . Avoid speculative, non-liquid investments

Serving through Disaster

ERIC Educational Resources Information Center

Kuzyk, Raya

2007-01-01

Disaster planning focuses on future function and recovery, on helping libraries expeditiously return to their original states of operation. It all but ignores the concept of continuous function throughout a disaster. This is not true in the private and government sectors, however, which have managed to cover a wider load of disaster response…

Formulation of consumables management models. Volume 2: Mission planning processor user guide

NASA Technical Reports Server (NTRS)

Daly, J. K.; Torian, J. G.

1978-01-01

A user guide for the MPP (Mission Planning Processor) is presented. The MPP is used in the evaluation of particular missions, with appropriate display and storage of related consumables data. Design goals are accomplished by the use of an on-line/demand mode computer terminal Cathode Ray Tube Display. The process is such that the user merely adds specific mission/flight functions to a skeleton flight and/or alters the skeleton. The skeleton flight includes operational aspects from prelaunch through ground support equipment connect after rollout as required to place the STS (Space Transportation System) in a parking orbit, maintain the spacecraft and crew for the stated on-orbit period and return.

Deformations of temporary wooden supports used to reduce building deflections in mining areas

NASA Astrophysics Data System (ADS)

Gromysz, Krzysztof

2018-04-01

Temporary supports, consisting of a stack of wooden elements and a hydraulic jack, are used in the process of removing deflections in buildings with one to three aboveground floors in mining areas. During uneven raising, the supports are loaded monotonically, unloaded and loaded cyclically. Laboratory tests were designed for the supports. For the investigated range of loads of 0 to 400 kN, under a growing load, a linear relationship exists between a load and the change in the stack length, which signifies that the deformations of wooden elements and displacements related to their mutual interactions increase proportionally. A seemingly higher stack stiffness is seen at the beginning of the unloading process and for cyclical loads, meaning that in this phase of loading, the material deformation of the wooden elements and the jack is responsible for changing the jack length in this load phase, with a negligible presence of mutual displacements of wooden elements. The support, after being unloaded, returns to the initial position and its permanent deformations are not observed. The stiffness of a temporary support decreases as the height of the stack of wooden elements increases.

Identification of critical equipment and determination of operational limits in helium refrigerators under pulsed heat load

NASA Astrophysics Data System (ADS)

Dutta, Rohan; Ghosh, Parthasarathi; Chowdhury, Kanchan

2014-01-01

Large-scale helium refrigerators are subjected to pulsed heat load from tokamaks. As these plants are designed for constant heat loads, operation under such varying load may lead to instability in plants thereby tripping the operation of different equipment. To understand the behavior of the plant subjected to pulsed heat load, an existing plant of 120 W at 4.2 K and another large-scale plant of 18 kW at 4.2 K have been analyzed using a commercial process simulator Aspen Hysys®. A similar heat load characteristic has been applied in both quasi steady state and dynamic analysis to determine critical stages and equipment of these plants from operational point of view. It has been found that the coldest part of both the cycles consisting JT-stage and its preceding reverse Brayton stage are the most affected stages of the cycles. Further analysis of the above stages and constituting equipment revealed limits of operation with respect to variation of return stream flow rate resulted from such heat load variations. The observations on the outcome of the analysis can be used for devising techniques for steady operation of the plants subjected to pulsed heat load.

Acquiring Research-grade ALSM Data in the Commercial Marketplace

NASA Astrophysics Data System (ADS)

Haugerud, R. A.; Harding, D. J.; Latypov, D.; Martinez, D.; Routh, S.; Ziegler, J.

2003-12-01

The Puget Sound Lidar Consortium, working with TerraPoint, LLC, has procured a large volume of ALSM (topographic lidar) data for scientific research. Research-grade ALSM data can be characterized by their completeness, density, and accuracy. Complete data include-at a minimum-X, Y, Z, time, and classification (ground, vegetation, structure, blunder) for each laser reflection. Off-nadir angle and return number for multiple returns are also useful. We began with a pulse density of 1/sq m, and after limited experiments still find this density satisfactory in the dense second-growth forests of western Washington. Lower pulse densities would have produced unacceptably limited sampling in forested areas and aliased some topographic features. Higher pulse densities do not produce markedly better topographic models, in part because of limitations of reproducibility between the overlapping survey swaths used to achieve higher density. Our experience in a variety of forest types demonstrates that the fraction of pulses that produce ground returns varies with vegetation cover, laser beam divergence, laser power, and detector sensitivity, but have not quantified this relationship. The most significant operational limits on vertical accuracy of ALSM appear to be instrument calibration and the accuracy with which returns are classified as ground or vegetation. TerraPoint has recently implemented in-situ calibration using overlapping swaths (Latypov and Zosse, 2002, see http://www.terrapoint.com/News_damirACSM_ASPRS2002.html). On the consumer side, we routinely perform a similar overlap analysis to produce maps of relative Z error between swaths; we find that in bare, low-slope regions the in-situ calibration has reduced this internal Z error to 6-10 cm RMSE. Comparison with independent ground control points commonly illuminates inconsistencies in how GPS heights have been reduced to orthometric heights. Once these inconsistencies are resolved, it appears that the internal errors are the bulk of the error of the survey. The error maps suggest that with in-situ calibration, minor time-varying errors with a period of circa 1 sec are the largest remaining source of survey error. For forested terrain, limited ground penetration and errors in return classification can severely limit the accuracy of resulting topographic models. Initial work by Haugerud and Harding demonstrated the feasibility of fully-automatic return classification; however, TerraPoint has found that better results can be obtained more effectively with 3rd-party classification software that allows a mix of automated routines and human intervention. Our relationship has been evolving since early 2000. Important aspects of this relationship include close communication between data producer and consumer, a willingness to learn from each other, significant technical expertise and resources on the consumer side, and continued refinement of achievable, quantitative performance and accuracy specifications. Most recently we have instituted a slope-dependent Z accuracy specification that TerraPoint first developed as a heuristic for surveying mountainous terrain in Switzerland. We are now working on quantifying the internal consistency of topographic models in forested areas, using a variant of overlap analysis, and standards for the spatial distribution of internal errors.

Aerothermodynamic optimization of Earth entry blunt body heat shields for Lunar and Mars return

NASA Astrophysics Data System (ADS)

Johnson, Joshua E.

A differential evolutionary algorithm has been executed to optimize the hypersonic aerodynamic and stagnation-point heat transfer performance of Earth entry heat shields for Lunar and Mars return manned missions with entry velocities of 11 and 12.5 km/s respectively. The aerothermodynamic performance of heat shield geometries with lift-to-drag ratios up to 1.0 is studied. Each considered heat shield geometry is composed of an axial profile tailored to fit a base cross section. Axial profiles consist of spherical segments, spherically blunted cones, and power laws. Heat shield cross sections include oblate and prolate ellipses, rounded-edge parallelograms, and blendings of the two. Aerothermodynamic models are based on modified Newtonian impact theory with semi-empirical correlations for convection and radiation. Multi-objective function optimization is performed to determine optimal trade-offs between performance parameters. Objective functions consist of minimizing heat load and heat flux and maximizing down range and cross range. Results indicate that skipping trajectories allow for vehicles with L/D = 0.3, 0.5, and 1.0 at lunar return flight conditions to produce maximum cross ranges of 950, 1500, and 3000 km respectively before Qs,tot increases dramatically. Maximum cross range increases by ˜20% with an increase in entry velocity from 11 to 12.5 km/s. Optimal configurations for all three lift-to-drag ratios produce down ranges up to approximately 26,000 km for both lunar and Mars return. Assuming a 10,000 kg mass and L/D = 0.27, the current Orion configuration is projected to experience a heat load of approximately 68 kJ/cm2 for Mars return flight conditions. For both L/D = 0.3 and 0.5, a 30% increase in entry vehicle mass from 10,000 kg produces a 20-30% increase in Qs,tot. For a given L/D, highly-eccentric heat shields do not produce greater cross range or down range. With a 5 g deceleration limit and L/D = 0.3, a highly oblate cross section with an eccentricity of 0.968 produces a 35% reduction in heat load over designs with zero eccentricity due to the eccentric heat shield's greater drag area that allows the vehicle to decelerate higher in the atmosphere. In this case, the heat shield's drag area is traded off with volumetric efficiency while fulfilling the given set of mission requirements. Additionally, the high radius-of-curvature of the spherical segment axial profile provides the best combination of heat transfer and aerodynamic performance for both entry velocities and a 5 g deceleration limit.

Energy Savings in Cellular Networks Based on Space-Time Structure of Traffic Loads

NASA Astrophysics Data System (ADS)

Sun, Jingbo; Wang, Yue; Yuan, Jian; Shan, Xiuming

Since most of energy consumed by the telecommunication infrastructure is due to the Base Transceiver Station (BTS), switching off BTSs when traffic load is low has been recognized as an effective way of saving energy. In this letter, an energy saving scheme is proposed to minimize the number of active BTSs based on the space-time structure of traffic loads as determined by principal component analysis. Compared to existing methods, our approach models traffic loads more accurately, and has a much smaller input size. As it is implemented in an off-line manner, our scheme also avoids excessive communications and computing overheads. Simulation results show that the proposed method has a comparable performance in energy savings.

Lunar Portable Life Support System Heat Rejection Study

NASA Technical Reports Server (NTRS)

Conger, Bruce; Sompayrac,Robert G.; Trevino, Luis A.; Bue, Grant C.

2009-01-01

Performing extravehicular activity (EVA) at various locations of the lunar surface presents thermal challenges that exceed those experienced in space flight to date. The lunar Portable Life Support System (PLSS) cooling unit must maintain thermal conditions within the space suit and reject heat loads generated by the crewmember and the PLSS equipment. The amount of cooling required varies based on the lunar location and terrain due to the heat transferred between the suit and its surroundings. A study has been completed which investigated the resources required to provide cooling under various lunar conditions, assuming three different thermal technology categories: 1. Spacesuit Water Membrane Evaporator (SWME) 2. Subcooled Phase Change Material (SPCM) 3. Radiators with and without heat pumps Results from the study are presented that show mass and power impacts on the cooling system as a function of the location and terrain on the lunar surface. Resources (cooling equipment mass and consumables) are greater at the equator and inside sunlit craters due to the additional heat loads on the cooling system. While radiator and SPCM technologies require minimal consumables, they come with carry-weight penalties and have limitations. A wider investigation is recommended to determine if these penalties and limitations are offset by the savings in consumables.

Tropical field performance of dual-pass PV tray dryer

NASA Astrophysics Data System (ADS)

Iskandar, A. Noor; Ya'acob, M. E.; Anuar, M. S.

2017-09-01

Solar Photovoltaic technology has become the preferable solution in many countries around the globe to solve the ever increasing energy demand of the consumers. In line with the consumer need, food processing technology has huge potentials of integration with the renewable energy resources especially in drying process which consumes the highest electricity loads. Traditionally, the solar dryer technology was applied in agriculture and food industries utilizing the sun's energy for drying process, but this is highly dependable on the weather condition and surrounding factors. This work shares some field performance of the new design of portable dual-pass PV tray dryer for drying crops in an enclosed system. The dual-pass PV tray dryer encompass a lightweight aluminium box structure with dimensions of 1.1m (L) x 0.6m (W) x 0.2m (H) and can hold a load capacity of 300g - 3kg of crop depending on the types of the crops. Experiments of field performance monitoring were conducted in October -November 2016 which justifies a considerable reduction in time and crops quality improvement when using the dual-pass PV tray dryer as compared to direct-sun drying.

NEA Multi-Chamber Sample Return Container with Hermetic Sealing

NASA Technical Reports Server (NTRS)

Rafeek, Shaheed; Kong, Kin Yuen; Sadick, Shazad; Porter, Christopher C.

2000-01-01

A sample return container is being developed by Honeybee Robotics to receive samples from a derivative of the Champollion/ST4 Sample Acquisition and Transfer Mechanism or other samplers such as the 'Touch and Go' Surface Sampler (TGSS), and then hermetically seal the samples for a sample return mission. The container is enclosed in a phase change material (PCM) chamber to prevent phase change during return and re-entry to earth. This container is designed to operate passively with no motors and actuators. Using the rotation axis of the TGSS sampler for interfacing, transferring and sealing samples, the container consumes no electrical power and therefore minimizes sample temperature change. The circular container houses multiple isolated canisters, which will be sealed individually for samples acquired from different sites or depths. The TGSS based sampler indexes each canister to the sample transfer position, below the index interface for sample transfer. After sample transfer is completed, the sampler indexes a seal carrier, which lines up seals with the openings of the canisters. The sampler moves to the sealing interface and seals the sample canisters one by one. The sealing interface can be designed to work with C-seals, knife edge seals and cup seals. This sample return container is being developed by Honeybee Robotics in collaboration with the JPL Exploration Technology program. A breadboard system of the sample return container has been recently completed and tested. Additional information is contained in the original extended abstract.

MSC/NASTRAN Stress Analysis of Complete Models Subjected to Random and Quasi-Static Loads

NASA Technical Reports Server (NTRS)

Hampton, Roy W.

2000-01-01

Space payloads, such as those which fly on the Space Shuttle in Spacelab, are designed to withstand dynamic loads which consist of combined acoustic random loads and quasi-static acceleration loads. Methods for computing the payload stresses due to these loads are well known and appear in texts and NASA documents, but typically involve approximations such as the Miles' equation, as well as possible adjustments based on "modal participation factors." Alternatively, an existing capability in MSC/NASTRAN may be used to output exact root mean square [rms] stresses due to the random loads for any specified elements in the Finite Element Model. However, it is time consuming to use this methodology to obtain the rms stresses for the complete structural model and then combine them with the quasi-static loading induced stresses. Special processing was developed as described here to perform the stress analysis of all elements in the model using existing MSC/NASTRAN and MSC/PATRAN and UNIX utilities. Fail-safe and buckling analyses applications are also described.

Mathematical Model and Artificial Intelligent Techniques Applied to a Milk Industry through DSM

NASA Astrophysics Data System (ADS)

Babu, P. Ravi; Divya, V. P. Sree

2011-08-01

The resources for electrical energy are depleting and hence the gap between the supply and the demand is continuously increasing. Under such circumstances, the option left is optimal utilization of available energy resources. The main objective of this chapter is to discuss about the Peak load management and overcome the problems associated with it in processing industries such as Milk industry with the help of DSM techniques. The chapter presents a generalized mathematical model for minimizing the total operating cost of the industry subject to the constraints. The work presented in this chapter also deals with the results of application of Neural Network, Fuzzy Logic and Demand Side Management (DSM) techniques applied to a medium scale milk industrial consumer in India to achieve the improvement in load factor, reduction in Maximum Demand (MD) and also the consumer gets saving in the energy bill.

Closed-form Static Analysis with Inertia Relief and Displacement-Dependent Loads Using a MSC/NASTRAN DMAP Alter

NASA Technical Reports Server (NTRS)

Barnett, Alan R.; Widrick, Timothy W.; Ludwiczak, Damian R.

1995-01-01

Solving for the displacements of free-free coupled systems acted upon by static loads is commonly performed throughout the aerospace industry. Many times, these problems are solved using static analysis with inertia relief. This solution technique allows for a free-free static analysis by balancing the applied loads with inertia loads generated by the applied loads. For some engineering applications, the displacements of the free-free coupled system induce additional static loads. Hence, the applied loads are equal to the original loads plus displacement-dependent loads. Solving for the final displacements of such systems is commonly performed using iterative solution techniques. Unfortunately, these techniques can be time-consuming and labor-intensive. Since the coupled system equations for free-free systems with displacement-dependent loads can be written in closed-form, it is advantageous to solve for the displacements in this manner. Implementing closed-form equations in static analysis with inertia relief is analogous to implementing transfer functions in dynamic analysis. Using a MSC/NASTRAN DMAP Alter, displacement-dependent loads have been included in static analysis with inertia relief. Such an Alter has been used successfully to solve efficiently a common aerospace problem typically solved using an iterative technique.

Further Studies of Aerodynamic Loads at Spin Entry

DTIC Science & Technology

1977-06-30

the model and the loads on the model for a research coafiguration having certain essential features of a modern fighter-bomber aircraft, since no such...percent at the tip. The model is geometrically similar to that described in reference 3 but approximately 2.4 times larger. The NASA model is designed to...measurements turned out to be extremely time consuming. Even though the V/STOL tunnel staff granted three additional days over the 10 originally scheduled for

Residential Energy Efficiency Demonstration: Hawaii and Guam Energy Improvement Technology Demonstration Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Earle, L.; Sparn, B.; Rutter, A.

2014-03-01

In order to meet its energy goals, the Department of Defense (DOD) has partnered with the Department of Energy (DOE) to rapidly demonstrate and deploy cost-effective renewable energy and energy-efficiency technologies. The scope of this project was to demonstrate tools and technologies to reduce energy use in military housing, with particular emphasis on measuring and reducing loads related to consumer electronics (commonly referred to as 'plug loads'), hot water, and whole-house cooling.

Load Lugging Locomotion: Lessons from Indigenous People, Rhino Beetles, and Wallabies

DTIC Science & Technology

2001-05-01

they consume metabolic energy at the same rate! Even hopping at a 4-minute mile pace, kangaroos are only at about a third of their aerobic capacity...carried for free. However, there is not a clear link between the mechanical work performed in walking and the metabolic cost. Rhinoceros beetles are...more cheaply. But kangaroos and wallabies can use internal springs to save energy during their hopping gait and to carry loads in their pouches. These

A questions-based investigation of consumer mental-health information

PubMed Central

Kart, Joyce Brothers

2015-01-01

Despite the wealth of mental-health information available online to consumers, research has shown that the mental-health information needs of consumers are not being met. This study contributes to that research by soliciting consumer questions directly, categorizing them, analyzing their form, and assessing the extent to which they can be answered from a trusted and vetted source of online information, namely the website of the US National Institute of Mental Health (NIMH). As an alternative to surveys and analyses of online activity, this study shows how consumer questions provide new insight into what consumers do not know and how they express their information needs. The study crowdsourced 100 consumer questions through Amazon Inc.’s Mechanical Turk. Categorization of the questions shows broad agreement with earlier studies in terms of the content of consumer questions. It also suggests that consumers’ grasp of mental health issues may be low compared to other health topics. The majority of the questions (74%) were simple in form, with the remainder being multi-part, multifaceted or narrative. Even simple-form questions could, however, have complex interpretations. Fifty four questions were submitted to the search box at the NIMH website. For 32 questions, no answer could be found in the top one to three documents returned. Inadequacies in the search and retrieval technology deployed at websites account for some of the failure to find answers. The nature of consumer questions in mental health also plays a role. A question that has a false presupposition is less likely to have an answer in trusted and vetted sources of information. Consumer questions are also expressed with a degree of specificity that makes the retrieval of relevant information difficult. The significance of this study is that it shows what an analysis of consumer mental-health questions can tell us about consumer information needs and it provides new insight into the difficulties facing consumers looking for answers to their questions in online resources. PMID:25870768

Persuasion and types of enticements offered by pharmaceutical companies to Gold Coast general practitioners in an attempt to encourage a health website recommendation.

PubMed

Usher, Wayne; Skinner, James

2010-01-01

This study was undertaken to determine if pharmaceutical companies persuade and offer enticements to Gold Coast (Queensland, Australia) general practitioners (GPs), in an attempt to encourage them to recommend health websites to the health consumer. A survey instrument consisting of seven single response questions was mailed to 250 (61%) out of 410 GPs. Questions were designed to measure the percentages (%) and proportions associated with levels of persuasion and types of enticements pharmaceutical companies are offering GPs, in an attempt to encourage them to recommend health websites to the health consumer. The survey instrument allowed participants to indicate their (1) gender, (2) age and (3) years of experience (less experienced or= 10 years). One hundred and eight (43%) of the 250 GPs returned a completed survey. The return rate for male GPs was 72 (40%) and for female GPs, it was 36 (33%). Sixty-eight (63%) GPs indicated that they actively recommend health websites to their patients [male GPs--48 (71%), female GPs--20 (29%)]. This study highlights that female GPs (80%), those aged between 31 and 40 (77%) and GPs with < 10 years experience (72%) were more frequently targeted by pharmaceutical companies. This study reports that pharmaceutical companies are offering various types of enticements in an attempt to persuade Gold Coast GPs to recommend specific health websites to the health consumer. Further research should explore if similar levels of persuasion and types of enticements are being offered to GPs across Australia.

Social costs of packaging competition in the beer and soft drink industries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fraundorf, K.C.

One-way containers have enabled consumers to shift some costs on to society by forcing society to carry the burden of waste disposal. Principal costs include urban garbage collection and disposal and litter collection. The effects of non-price competition, particularly the introduction of non-returnable cans and bottles, on the competitive structure of the beer and soft drink industries are traced. Eventually the non-returnable packaging tactic was successful for national brewers; their profits increased as did their share of the industry's market. In the soft drink industry, the introduction of cans and non-returnable bottles by small companies challenged Coca-Cola's long-held dominant position.more » Social costs based on extra containers and municipal refuse expenditures understate the true costs, because they exclude ecological and health damage and the effect of litter on psychological well being. The costs, though understated, represent from 2 to 8% of sales, indicating a substantial degree of private-to-social cost shifting. (DCK)« less

Orbiter Gap Filler Bending Model for Re-entry

NASA Technical Reports Server (NTRS)

Campbell, Charles H.

2007-01-01

Pressure loads on a protruding gap filler during an Orbiter reentry are investigated to evaluate the likelihood of extraction due to pressure loads, and to ascertain how much bending will be induced by re-entry pressure loads. Oblique shock wave theory is utilized to develop a representation of the pressure loads induced on a gap filler for the ISSHVFW trajectory, representative of a heavy weight ISS return. A free body diagram is utilized to react the forces induced by the pressure forces. Preliminary results developed using these methods demonstrate that pressure loads, alone, are not likely causes of gap filler extraction during reentry. Assessment of the amount a gap filler will bend over is presented. Implications of gap filler bending during re-entry include possible mitigation of early boundary layer transition concerns, uncertainty in ground based measurement of protruding gap fillers from historical Orbiter flight history, and uncertainty in the use of Orbiter gap fillers for boundary layer prediction calibration. Authors will be added to the author list as appropriate.

Potential Effects of Wood Chip Mill Harvests on Economic Returns and Forest Management Practices of Nonindustrial Private Forest Landowners in North Carolina

Treesearch

Anthony Snider; Frederick Cubbage; Robert Moulton

2001-01-01

Four approaches were used to estimate the market effects of wood chip mills for nonindustrial private forest (NIPF) landowners. First, we used economic welfare analyses to estimate potential changes in consumer and producer surplus that might be attributed to increased stumpage demand created by wood chip mills. Better markets would consistently increase economic...

Being "Stresslessly Invisible": The Rise and Fall of Videophony in David Foster Wallace's "Infinite Jest"

ERIC Educational Resources Information Center

Ribbat, Christoph

2010-01-01

In a satiric chapter of David Foster Wallace's novel "Infinite Jest," a mock media expert reports how American consumers of the near future recoil from a new communication device known as "videophony" and return to the voice-only telephone of the Bell Era. This article explores the said chapter in the framework of media theories reading the…

Key Residential Building Equipment Technologies for Control and Grid Support PART I (Residential)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Starke, Michael R; Onar, Omer C; DeVault, Robert C

2011-09-01

Electrical energy consumption of the residential sector is a crucial area of research that has in the past primarily focused on increasing the efficiency of household devices such as water heaters, dishwashers, air conditioners, and clothes washer and dryer units. However, the focus of this research is shifting as objectives such as developing the smart grid and ensuring that the power system remains reliable come to the fore, along with the increasing need to reduce energy use and costs. Load research has started to focus on mechanisms to support the power system through demand reduction and/or reliability services. The powermore » system relies on matching generation and load, and day-ahead and real-time energy markets capture most of this need. However, a separate set of grid services exist to address the discrepancies in load and generation arising from contingencies and operational mismatches, and to ensure that the transmission system is available for delivery of power from generation to load. Currently, these grid services are mostly provided by generation resources. The addition of renewable resources with their inherent variability can complicate the issue of power system reliability and lead to the increased need for grid services. Using load as a resource, through demand response programs, can fill the additional need for flexible resources and even reduce costly energy peaks. Loads have been shown to have response that is equal to or better than generation in some cases. Furthermore, price-incentivized demand response programs have been shown to reduce the peak energy requirements, thereby affecting the wholesale market efficiency and overall energy prices. The residential sector is not only the largest consumer of electrical energy in the United States, but also has the highest potential to provide demand reduction and power system support, as technological advancements in load control, sensor technologies, and communication are made. The prevailing loads based on the largest electrical energy consumers in the residential sector are space heating and cooling, washer and dryer, water heating, lighting, computers and electronics, dishwasher and range, and refrigeration. As the largest loads, these loads provide the highest potential for delivering demand response and reliability services. Many residential loads have inherent flexibility that is related to the purpose of the load. Depending on the load type, electric power consumption levels can either be ramped, changed in a step-change fashion, or completely removed. Loads with only on-off capability (such as clothes washers and dryers) provide less flexibility than resources that can be ramped or step-changed. Add-on devices may be able to provide extra demand response capabilities. Still, operating residential loads effectively requires awareness of the delicate balance of occupants health and comfort and electrical energy consumption. This report is Phase I of a series of reports aimed at identifying gaps in automated home energy management systems for incorporation of building appliances, vehicles, and renewable adoption into a smart grid, specifically with the intent of examining demand response and load factor control for power system support. The objective is to capture existing gaps in load control, energy management systems, and sensor technology with consideration of PHEV and renewable technologies to establish areas of research for the Department of Energy. In this report, (1) data is collected and examined from state of the art homes to characterize the primary residential loads as well as PHEVs and photovoltaic for potential adoption into energy management control strategies; and (2) demand response rules and requirements across the various demand response programs are examined for potential participation of residential loads. This report will be followed by a Phase II report aimed at identifying the current state of technology of energy management systems, sensors, and communication technologies for demand response and load factor control applications for the residential sector. The purpose is to cover the gaps that exist in the information captured by the sensors for energy management system to be able to provide demand response and load factor control. The vision is the development of an energy management system or other controlling enterprise hardware and software that is not only able to control loads, PHEVs, and renewable generation for demand response and load factor control, but also to do so with consumer comforts in mind and in an optimal fashion.« less

The Potential of Combined Heat and Power Generation, Wind Power Generation and Load Management Techniques for Cost Reduction in Small Electricity Supply Systems.

NASA Astrophysics Data System (ADS)

Bass, Jeremy Hugh

Available from UMI in association with The British Library. Requires signed TDF. An evaluation is made of the potential fuel and financial savings possible when a small, autonomous diesel system sized to meet the demands of an individual, domestic consumer is adapted to include: (1) combined heat and power (CHP) generation, (2) wind turbine generation, (3) direct load control. The potential of these three areas is investigated by means of time-step simulation modelling on a microcomputer. Models are used to evaluate performance and a Net Present Value analysis used to assess costs. A cost/benefit analysis then enables those areas, or combination of areas, that facilitate and greatest savings to be identified. The modelling work is supported by experience gained from the following: (1) field study of the Lundy Island wind/diesel system, (2) laboratory testing of a small diesel generator set, (3) study of a diesel based CHP unit, (4) study of a diesel based direct load control system, (5) statistical analysis of data obtained from the long-term monitoring of a large number of individual household's electricity consumption. Rather than consider the consumer's electrical demand in isolation, a more flexible approach is adopted, with consumer demand being regarded as the sum of primarily two components: a small, electricity demand for essential services and a large, reschedulable demand for heating/cooling. The results of the study indicate that: (1) operating a diesel set in a CHP mode is the best strategy for both financial and fuel savings. A simple retrofit enables overall conversion efficiencies to be increased from 25% to 60%, or greater, at little cost. (2) wind turbine generation in association with direct load control is a most effective combination. (3) a combination of both the above areas enables greatest overall financial savings, in favourable winds resulting in unit energy costs around 20% of those of diesel only operation.

Three-dimensional effects for radio frequency antenna modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carter, M.D.; Batchelor, D.B.; Stallings, D.C.

1994-10-15

Electromagnetic field calculations for radio frequency (rf) antennas in two dimensions (2-D) neglect finite antenna length effects as well as the feeders leading to the main current strap. The 2-D calculations predict that the return currents in the sidewalls of the antenna structure depend strongly on the plasma parameters, but this prediction is suspect because of experimental evidence. To study the validity of the 2-D approximation, the Multiple Antenna Implementation System (MAntIS) has been used to perform three-dimensional (3-D) modeling of the power spectrum, plasma loading, and inductance for a relevant loop antenna design. Effects on antenna performance caused bymore » feeders to the main current strap and conducting sidewalls are considered. The modeling shows that the feeders affect the launched power spectrum in an indirect way by forcing the driven rf current to return in the antenna structure rather than the plasma, as in the 2-D model. It has also been found that poloidal dependencies in the plasma impedance matrix can reduce the loading predicted from that predicted in the 2-D model. For some plasma parameters, the combined 3-D effects can lead to a reduction in the predicted loading by as much as a factor of 2 from that given by the 2-D model, even with end-effect corrections for the 2-D model.« less

Three-dimensional effects for radio frequency antenna modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carter, M.D.; Batchelor, D.B.; Stallings, D.C.

1993-12-31

Electromagnetic field calculations for radio frequency (rf) antennas in two dimensions (2-D) neglect finite antenna length effects as well as the feeders leading to the main current strap. The 2-D calculations predict that the return currents in the sidewalls of the antenna structure depend strongly on the plasma parameters, but this prediction is suspect because of experimental evidence. To study the validity of the 2-D approximation, the Multiple Antenna Implementation System (MAntIS) has been used to perform three-dimensional (3-D) modeling of the power spectrum, plasma loading, and inductance for a relevant loop antenna design. Effects on antenna performance caused bymore » feeders to the main current strap and conducting sidewalls are considered. The modeling shows that the feeders affect the launched power spectrum in an indirect way by forcing the driven rf current to return in the antenna structure rather than the plasma, as in the 2-D model. It has also been found that poloidal dependencies in the plasma impedance matrix can reduce the loading predicted from that predicted in the 2-D model. For some plasma parameters, the combined 3-D effects can lead to a reduction in the predicted loading by as much as a factor of 2 from that given by the 2-D model, even with end-effect corrections for the 2-D model.« less

Glycaemic index and glycaemic load of selected popular foods consumed in Southeast Asia.

PubMed

Sun, Lijuan; Lee, Davina Elizabeth Mei; Tan, Wei Jie Kevin; Ranawana, Dinesh Viren; Quek, Yu Chin Rina; Goh, Hui Jen; Henry, Christiani Jeyakumar

2015-03-14

The objective of the present study was to determine the glycaemic index (GI) and glycaemic load (GL) values of standard portion sizes of Southeast Asian traditional foods. A total of fifteen popular Southeast Asian foods were evaluated. Of these foods, three were soft drinks, while the other twelve were solid foods commonly consumed in this region. In total, forty-seven healthy participants (eighteen males and twenty-nine females) volunteered to consume either glucose at least twice or one of the fifteen test foods after a 10-12 h overnight fast. Blood glucose concentrations were analysed before consumption of the test food, and 15, 30, 45, 60, 90 and 120 min after food consumption, using capillary blood samples. The GI value of each test food was calculated by expressing the incremental area under the blood glucose response curve (IAUC) value of the test food as a percentage of each participant's average IAUC value, with glucose as the reference food. Among the fifteen foods tested, six belonged to low-GI foods (Ice Green Tea, Beehoon, Pandan Waffle, Curry Puff, Youtiao and Kaya Butter Toast), three belonged to medium-GI foods (Barley Drink, Char Siew Pau and Nasi Lemak), and the other six belonged to high-GI foods (Ice Lemon Tea, Chinese Carrot Cake, Chinese Yam Cake, Chee Cheong Fun, Lo Mai Gai and Pink Rice Cake). The GI and GL values of these traditional foods provide valuable information to consumers, researchers and dietitians on the optimal food choice for glycaemic control. Moreover, our dataset provides GI values of fifteen foods that were not previously tested extensively, and it presents values of foods commonly consumed in Southeast Asia.

Calculation of reinforced-concrete frame strength under a simultaneous static cross section load and a column lateral impact

NASA Astrophysics Data System (ADS)

Belov, Nikolay; Yugov, Nikolay; Kopanitsa, Dmitry; Kopanitsa, Georgy; Yugov, Alexey; Kaparulin, Sergey; Plyaskin, Andrey; Kalichkina, Anna; Ustinov, Artyom

2016-01-01

When designing buildings with reinforced concrete that are planned to resist dynamic loads it is necessary to calculate this structural behavior under operational static and emergency impact and blast loads. Calculations of the structures under shock-wave loads can be performed by solving dynamic equations that do not consider static loads. Due to this fact the calculation of reinforced concrete frame under a simultaneous static and dynamic load in full 3d settings becomes a very non trivial and resource consuming problem. This problem can be split into two tasks. The first one is a shock-wave problem that can be solved using software package RANET-3, which allows solving the problem using finite elements method adapted for dynamic task. This method calculates strain-stress state of the material and its dynamic destruction, which is considered as growth and consolidation of micro defects under loading. On the second step the results of the first step are taken as input parameters for quasi static calculation of simultaneous static and dynamic load using finite elements method in AMP Civil Engineering-11.

KSC-04PD-1270

NASA Technical Reports Server (NTRS)

2004-01-01

KENNEDY SPACE CENTER, FLA. After leaving the Vehicle Assembly Building, the external tank seen here points its way toward the Turn Basin and the Banana River. The tank will be loaded onto the waiting barge and transferred to the Michoud Space Systems Assembly Facility near New Orleans where redesign of the external tank is underway for Return to Flight.

Hydrologic response and recovery to prescribed fire and vegetation removal in a small rangeland catchment

USDA-ARS?s Scientific Manuscript database

Prescribed fire can be used to return wild lands to their natural fire cycle, control invasive weeds, and reduce fuel loads, but there are gaps in the understanding of post-disturbance responses of vegetation and hydrology. The impact of a prescribed fire and subsequent aspen cutting on evapotransp...

76 FR 36870 - Special Conditions: Gulfstream Model GVI Airplane; Design Roll Maneuver Requirement for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-23

... airplane will have a novel or unusual design feature associated with an electronic flight control system... load condition at design maneuvering speed (V A ), in which the cockpit roll control is returned to... positive maneuvering factor used in design. In determining the resulting control surface deflections, the...

Targeted, On-Demand Charge Conversional Nanotherapeutics for Advanced Prostate Cancer

DTIC Science & Technology

2015-09-01

Figure 3 . The fluorescent activated cell sorting (FACS) analysis of cellular uptake of Cy5.5 loaded Pep -PEG-PTMC nanoparticles after incubation with...PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE September 2015 2. REPORT TYPE Annual 3 . DATES COVERED 29 Aug 2014 – 28 Aug...

Operating instructions, Diborane shipping container DOT special permit no. 6522, volume 3

NASA Technical Reports Server (NTRS)

1972-01-01

A manual is presented to provide instructions and information for safe and efficient use of the 200-pound diborane shipping container. The scope of the manual includes: shipping, receiving, storage, unloading, return, cleanout, and loading. Backup information on container design and performance, diborane information, etc., are also included.

Analysis of payload bay magnetic fields due to dc power multipoint and single point ground configurations

NASA Technical Reports Server (NTRS)

Lawton, R. M.

1976-01-01

An analysis of magnetic fields in the Orbiter Payload Bay resulting from the present grounding configuration (structure return) was presented and the amount of improvement that would result from installing wire returns for the three dc power buses was determined. Ac and dc magnetic fields at five points in a cross-section of the bay are calculated for both grounding configurations. Y and Z components of the field at each point are derived in terms of a constant coefficient and the current amplitude of each bus. The dc loads assumed are 100 Amperes for each bus. The ac noise current used is a spectrum 6 db higher than the Orbiter equipment limit for narrowband conducted emissions. It was concluded that installing return wiring to provide a single point ground for the dc Buses in the Payload Bay would reduce the ac and dc magnetic field intensity by approximately 30 db.

The role of respiratory measures to assess mental load in pilot selection.

PubMed

Grassmann, Mariel; Vlemincx, Elke; von Leupoldt, Andreas; Van den Bergh, Omer

2016-06-01

While cardiovascular measures have a long tradition of being used to determine operator load, responsiveness of the respiratory system to mental load has rarely been investigated. In this study, we assessed basic and variability measures of respiration rate (RR), partial pressure of end-tidal carbon dioxide (petCO2) as well as performance measures in 63 male pilot candidates during completion of a complex cognitive task and subsequent recovery. Mental load was associated with an increase in RR and a decrease in respiratory variability. A significant decrease was also found for petCO2. RR and respiratory variability showed partial and complete effects of recovery, respectively, whereas petCO2 did not return to baseline level. Overall, a good performance was related to a stronger reactivity in RR. Our findings suggest that respiratory parameters would be a useful supplement to common measures for the assessment of mental load in pilot selection. Practitioner Summary: Respiratory measures are a promising yet poorly investigated approach to monitor operator load. For pilot selection, we assessed respiration in response to multitasking in 63 candidates. Task-related changes as well as covariation with performance strongly support the consideration of respiratory parameters when evaluating reactivity to mental load.

Utilizing CFD for Prediction of HD1.3 Pressure Loads in a Cell with Venting

DTIC Science & Technology

2010-07-01

room. The gas load is a result of the heat released during the explosion and afterburning of explosives that was not consumed by the initial...Structural Systems Design Guide HNDED-CS-93-72 specifies that all HD 1.3 in a room will be summed and converted to an equivalent TNT mass (based on...the H2 and CO are shown in Table 5. The Pre- Afterburning quantities are based on the chemical equilibrium calculations performed in the AFCESI code

Maintaining Balance: The Increasing Role of Energy Storage for Renewable Integration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stenclik, Derek; Denholm, Paul; Chalamala, Babu

For nearly a century, global power systems have focused on three key functions: generating, transmitting, and distributing electricity as a real-time commodity. Physics requires that electricity generation always be in real-time balance with load-despite variability in load on time scales ranging from subsecond disturbances to multiyear trends. With the increasing role of variable generation from wind and solar, the retirement of fossil-fuel-based generation, and a changing consumer demand profile, grid operators are using new methods to maintain this balance.

Data processing of high-rate low-voltage distribution grid recordings for smart grid monitoring and analysis

NASA Astrophysics Data System (ADS)

Maaß, Heiko; Cakmak, Hüseyin Kemal; Bach, Felix; Mikut, Ralf; Harrabi, Aymen; Süß, Wolfgang; Jakob, Wilfried; Stucky, Karl-Uwe; Kühnapfel, Uwe G.; Hagenmeyer, Veit

2015-12-01

Power networks will change from a rigid hierarchic architecture to dynamic interconnected smart grids. In traditional power grids, the frequency is the controlled quantity to maintain supply and load power balance. Thereby, high rotating mass inertia ensures for stability. In the future, system stability will have to rely more on real-time measurements and sophisticated control, especially when integrating fluctuating renewable power sources or high-load consumers like electrical vehicles to the low-voltage distribution grid.

Measuring bed load discharge in rivers: bedload-surrogate monitoring workshop Minneapolis, Minnesota, 11-14 April 2007

USGS Publications Warehouse

Gray, John R.; Laronne, Jonathan B.; Marr, Jeffrey D.G.

2007-01-01

The International Bedload-Surrogate Monitoring Workshop (http://www.nced.umn.edu/BRIC_2007.html), organized by the Bedload Research International Cooperative (BRIC; www.bedloadresearch.org), was held to assess and abet progress in continuous, semiautomated, or fully automated (surrogate) technologies for monitoring bed load discharge in gravel-, sand-, and mixed gravel-sand-bedded rivers. Direct bed load measurements, particularly at medium and high flows, during which most bed load occurs, tend to be time-consuming, expensive, and potentially hazardous. Surrogate technologies developed largely over the past decade and used at a number of research sites around the world show considerable promise toward providing relatively dense, robust, and quantifiably reliable bed load data sets. However, information on the efficacy of selected technologies for use in monitoring programs is needed, as is identification of the ways and means for bringing the most promising and practical of the technologies to fruition.

Extended Aging Theories for Predictions of Safe Operational Life of Critical Airborne Structural Components

NASA Technical Reports Server (NTRS)

Ko, William L.; Chen, Tony

2006-01-01

The previously developed Ko closed-form aging theory has been reformulated into a more compact mathematical form for easier application. A new equivalent loading theory and empirical loading theories have also been developed and incorporated into the revised Ko aging theory for the prediction of a safe operational life of airborne failure-critical structural components. The new set of aging and loading theories were applied to predict the safe number of flights for the B-52B aircraft to carry a launch vehicle, the structural life of critical components consumed by load excursion to proof load value, and the ground-sitting life of B-52B pylon failure-critical structural components. A special life prediction method was developed for the preflight predictions of operational life of failure-critical structural components of the B-52H pylon system, for which no flight data are available.

Barriers to vocational effectiveness in ACT: staff perspectives.

PubMed

Waynor, William R; Pratt, Carlos W

2011-01-01

Assertive community treatment (ACT), for persons with serious mental illness, includes a vocational focus as an important aspect of community integration. Nevertheless, research suggests that ACT does not assist significant numbers of consumers in achieving employment goals. A two-step survey of New Jersey ACT team members was designed to identify the key issues that hinder ACT staff members in assisting consumers with obtaining employment. Survey items were categorized into three sections: (a) staff attitudes, (b) consumer barriers, and (c) staff barriers to working on employment. The initial survey asked staff members to rate items in each of these categories. Highly rated items were used in a subsequent paired comparison survey to determine the relative importance of each. This method highlighted the following issues: four staff attitude items-(a) returning to work is positive, (b) employment is key to recovery, (c) abstinence from substance abuse is needed to work, and (d) consumers are too ill to work; four consumer barrier items-(a) fear of loss of Social Security Administration benefits, (b) symptoms related to the illness, (c) lack of motivation, and (d) poor social skills; and three barriers to working on employment issues items-(a) clinical issues take priority, (b) other case management issues takes priority, and (c) too many emergencies. The implications for staff training are discussed.

Continuous use of social commerce: Its conceptual relation with E-WOM, commitment and trust

NASA Astrophysics Data System (ADS)

Sami, Atyaf; Hashim, Kamarul Faizal; Yusof, Shafiz Affendi Mohd

2016-08-01

The popularity of social media has changed the way of doing business and introduces a new type of commerce known later as social commerce (s-commerce). Within s-commerce, consumer's loyalty and returning to use have reduced mainly because it is a high competitive environment, which is simply presented by products that proposed and announced rapidly to the market. S-commerce has a magic power called Electronic Word-of-Mouth (E-WOM). E-WOM enables consumers to make a collaboration decision as well as it enable business to reach up their consumers and their network in low cost and short time. Yet, to date, there is limited research that conducted the effect of E-WOM on consumer's continuous use behavior. Therefore, this study is an attempt to propose a value conceptual model that explains the relationship between e-WOM and continuous use behavior. This study serves not only to clarify the relationship between e-WOM and continuous use, but also to explain the mediating role of trust and commitment in this relationship; a theory known as Commitment-Trust theory is adopted. Additionally, drawing upon flow theory, this study examines flow experience determinants as predictors for promoting e-WOM among s-commerce consumers.

Is the Drugstore Safe? Counterfeit Diabetes Products on the Shelves

PubMed Central

Cheng, May M.

2009-01-01

It is no longer possible to identify counterfeit medical products, including medications and devices, by simply checking packaging and labeling. Improvements in technology have made it cheaper and easier to produce fake packaging and labels, making it nearly impossible for consumers and authorities to detect counterfeits without conducting tests on the products themselves, as illustrated by the sale of over one million counterfeit blood glucose test strips sold to unsuspecting U.S. consumers at drugstores in more than 35 states and in other countries around the world in the fall of 2006. The pricier the drugs, the more counterfeiters seek to mimic them to maximize returns, victimizing those patients at highest risk who rely on life-saving medications. PMID:20144408

Quantity discounts on a virtual good: The results of a massive pricing experiment at King Digital Entertainment

PubMed Central

Levitt, Steven D.; List, John A.; Neckermann, Susanne; Nelson, David

2016-01-01

We report on a natural field experiment on quantity discounts involving more than 14 million consumers. Implementing price reductions ranging from 9–70% for large purchases, we found remarkably little impact on revenue, either positively or negatively. There was virtually no increase in the quantity of customers making a purchase; all the observed changes occurred for customers who already were buyers. We found evidence that infrequent purchasers are more responsive to discounts than frequent purchasers. There was some evidence of habit formation when prices returned to pre-experiment levels. There also was some evidence that consumers contemplating small purchases are discouraged by the presence of extreme quantity discounts for large purchases. PMID:27382146

Effects of nutrient load on microbial activities within a seagrass-dominated ecosystem: Implications of changes in seagrass blue carbon.

PubMed

Liu, Songlin; Jiang, Zhijian; Wu, Yunchao; Zhang, Jingping; Arbi, Iman; Ye, Feng; Huang, Xiaoping; Macreadie, Peter Ian

2017-04-15

Nutrient loading is a leading cause of global seagrass decline, triggering shifts from seagrass- to macroalgal-dominance. Within seagrass meadows of Xincun Bay (South China Sea), we found that nutrient loading (due to fish farming) increased sediment microbial biomass and extracellular enzyme activity associated with carbon cycling (polyphenol oxidase, invertase and cellulase), with a corresponding decrease in percent sediment organic carbon (SOC), suggesting that nutrients primed microorganism and stimulated SOC remineralization. Surpisingly, however, the relative contribution of seagrass-derived carbon to bacteria (δ 13 C bacteria ) increased with nutrient loading, despite popular theory being that microbes switch to consuming macroalgae which are assumed to provide a more labile carbon source. Organic carbon sources of fungi were unaffected by nutrient loading. Overall, this study suggests that nutrient loading changes the relative contribution of seagrass and algal sources to SOC pools, boosting sediment microbial biomass and extracellular enzyme activity, thereby possibly changing seagrass blue carbon. Copyright © 2017 Elsevier Ltd. All rights reserved.

An exploratory investigation of the landscape-lake interface: Land cover controls over consumer N and C isotopic composition in Lake Michigan rivermouths

USGS Publications Warehouse

Larson, James H.; Richardson, William B.; Vallazza, Jonathan M.; Nelson, J. C.

2012-01-01

Rivermouth ecosystems are areas where tributary waters mix with lentic near-shore waters and provide habitat for many Laurentian Great Lakes fish and wildlife species. Rivermouths are the interface between terrestrial activities that influence rivers and the ecologically important nearshore. Stable isotopes of nitrogen (N) and carbon (C) in consumers were measured from a range of rivermouths systems to address two questions: 1) What is the effect of rivermouth ecosystems and land cover on the isotopic composition of N available to rivermouth consumers? 2) Are rivermouth consumers composed of lake-like or river-like C? For question 1, data suggest that strong relationships between watershed agriculture and consumer N are weakened or eliminated at the rivermouth, in favor of stronger relationships between consumer N and depositional areas that may favor denitrification. For question 2, despite apparently large riverine inputs, consumers only occasionally appear river-like. More often consumers seem to incorporate large amounts of C from either the nearshore or primary production within the rivermouth itself. Rivermouths appear to be active C and N processing environments, thus necessitating their explicit incorporation into models estimating nearshore loading and possibly contributing to their importance to Great Lakes biota.

Response of the Magnetosphere and Atmosphere to the Solar Wind

DTIC Science & Technology

1975-12-01

currents and the earth’s main field. However, this Is a very time consuming process. For the model to be useful It must be capable of returning the...8217^’:: aaüteamsatiaämaiim jaMajay» ^^^^•^^^- iaaaaa jmn&> aüät^■-■:^- Kfc ^*a^^~-w^^^.^^ .--v.^^ M.x -^^j^^^^i^ TT1-’^ilil-lt.^r,f .^^^..^^^s-^»^.^^^^^afeMiai^^a

Calcium chloride: A new solution for frozen coal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boley, D.G.

Few situations can strike more terror into the hearts of utility and industrial powerplant managers than the arrival of hopper cars loaded with solidly frozen coal. If the cars aren't emptied and returned to the railroad, usually within about 48 hours, demurrage (the equipment-detention charge) begins and can quickly rise to $50 or more per day per car. All to frequently, the hasty solution is to assign $16/hr workers the task of manually breaking up the frozen coal, using techniques that the mining industry considered obsolete 50 years ago. A CaCl/sub 2/ system represents a small investment. Either in drymore » or liquid form, the chemical is inexpensive and is consumed only when it is needed. The essential equipment, which is easy to operate and maintain, consists primarily of a storage tank, a pump, the necessary piping or hose, and either a fixed or portable spray applicator. A flowmeter will monitor the application rate, and the tank may be optionally heated. Application cost, including labor, for CaCl/sub 2/ is usually between $2.65 and $3.25 per treated ton. This is approximately half the cost of energy, per ton of coal, consumed by a thaw shed. In an emergency, when railcar demurrage costs are building at $50 or more per day per car, CaCl/sub 2/ is not only an inexpensive solution; it is possibly the only practical answer to the frozen-coal problem (see box, below). When used by itself, CaCl/sub 2/ minimizes the cost and frustration of unloading frozen coal because labor, equipment, chemical, energy, and maintenance costs are all held in tight control. When used to complement mechanical and/or thermal techniques, it increases unloading capacity, thereby improving productivity and helping to control all costs of cold-weather coal handling.« less

Aeroelastic Ground Wind Loads Analysis Tool for Launch Vehicles

NASA Technical Reports Server (NTRS)

Ivanco, Thomas G.

2016-01-01

Launch vehicles are exposed to ground winds during rollout and on the launch pad that can induce static and dynamic loads. Of particular concern are the dynamic loads caused by vortex shedding from nearly-cylindrical structures. When the frequency of vortex shedding nears that of a lowly-damped structural mode, the dynamic loads can be more than an order of magnitude greater than mean drag loads. Accurately predicting vehicle response to vortex shedding during the design and analysis cycles is difficult and typically exceeds the practical capabilities of modern computational fluid dynamics codes. Therefore, mitigating the ground wind loads risk typically requires wind-tunnel tests of dynamically-scaled models that are time consuming and expensive to conduct. In recent years, NASA has developed a ground wind loads analysis tool for launch vehicles to fill this analytical capability gap in order to provide predictions for prelaunch static and dynamic loads. This paper includes a background of the ground wind loads problem and the current state-of-the-art. It then discusses the history and significance of the analysis tool and the methodology used to develop it. Finally, results of the analysis tool are compared to wind-tunnel and full-scale data of various geometries and Reynolds numbers.

Speciation and fate of copper in sewage treatment works with and without tertiary treatment: the effect of return flows.

PubMed

Innaa, D; Lester, J N; Scrimshawb, M D; Cartmell, E

2014-01-01

The removal of metals from wastewaters is becoming an important issue, with new environmental quality standards putting increased regulatory pressure on operators of sewage treatment works. The use of additional processes (tertiary treatment) following two-stage biological treatment is frequently seen as a way of improving effluent quality for nutrients and suspended solids, and this study investigates the impact of how back washes from these tertiary processes may impact the removal of copper during primary sedimentation. Seven sites were studied, three conventional two-stage biological treatment, and four with tertiary processes. It was apparent that fluxes of copper in traditional return flows made a significant contribution to the load to the primary treatment tanks, and that <1% of this was in the dissolved phase. Where tertiary processes were used, back wash liquors were also returned to the primary tanks. These return flows had an impact on copper removal in the primary tanks, probably due to their aerobic nature. Returning such aerobic back wash flows to the main process stream after primary treatment may therefore be worth consideration. The opportunity to treat consolidated liquor and sludge.flows in side-stream processes to remove toxic elements, as they are relatively concentrated, low volume flow streams, should also be evaluated.

Approaches to Enable Demand Response by Industrial Loads for Ancillary Services Provision

NASA Astrophysics Data System (ADS)

Zhang, Xiao

Demand response has gained significant attention in recent years as it demonstrates potentials to enhance the power system's operational flexibility in a cost-effective way. Industrial loads such as aluminum smelters, steel manufacturers, and cement plants demonstrate advantages in supporting power system operation through demand response programs, because of their intensive power consumption, already existing advanced monitoring and control infrastructure, and the strong economic incentive due to the high energy costs. In this thesis, we study approaches to efficiently integrate each of these types of manufacturing processes as demand response resources. The aluminum smelting process is able to change its power consumption both accurately and quickly by controlling the pots' DC voltage, without affecting the production quality. Hence, an aluminum smelter has both the motivation and the ability to participate in demand response. First, we focus on determining the optimal regulation capacity that such a manufacturing plant should provide. Next, we focus on determining its optimal bidding strategy in the day-ahead energy and ancillary services markets. Electric arc furnaces (EAFs) in steel manufacturing consume a large amount of electric energy. However, a steel plant can take advantage of time-based electricity prices by optimally arranging energy-consuming activities to avoid peak hours. We first propose scheduling methods that incorporate the EAFs' flexibilities to reduce the electricity cost. We then propose methods to make the computations more tractable. Finally, we extend the scheduling formulations to enable the provision of spinning reserve. Cement plants are able to quickly adjust their power consumption rate by switching on/off the crushers. However, switching on/off the loading units only achieves discrete power changes, which restricts the load from offering valuable ancillary services such as regulation and load following, as continuous power changes are required for these services. We propose methods that enable these services with the support of an on-site energy storage device. As demonstrated by the case studies, the proposed approaches are effective and can generate practical production instructions for the industrial loads. This thesis not only provides methods to enable demand response by industrial loads but also potentially encourages industrial loads to be active in electricity markets.

Australian football players' Achilles tendons respond to game loads within 2 days: an ultrasound tissue characterisation (UTC) study.

PubMed

Rosengarten, Samuel D; Cook, Jill L; Bryant, Adam L; Cordy, Justin T; Daffy, John; Docking, Sean I

2015-02-01

The Achilles tendon is a tissue that responds to mechanical loads at a molecular and cellular level. In vitro and in vivo studies have shown that the expression of anabolic and/or catabolic proteins can change within hours of loading and return to baseline levels within 72 h. These biochemical changes have not been correlated with changes in whole tendon structure on imaging. We examined the nature and temporal sequence of changes in Achilles tendon structure in response to competitive game loads in elite Australian football players. Elite male Australian football players with no history of Achilles tendinopathy were recruited. Achilles tendon structure was quantified using ultrasound tissue characterisation (UTC) imaging, a valid and reliable measure of intratendinous structure, the day prior to the match (day 0), and then reimaged on days 1, 2 and 4 postgame. Of the 18 participants eligible for this study, 12 had no history of tendinopathy (NORM) and 6 had a history of patellar or hamstring tendinopathy (TEN). Differences in baseline UTC echopattern were observed between the NORM and TEN groups, with the Achilles of the TEN group exhibiting altered UTC echopattern, consistent with a slightly disorganised tendon structure. In the NORM group, a significant reduction in echo-type I (normal tendon structure) was seen on day 2 (p=0.012) that returned to baseline on day 4. There was a transient change in UTC echopattern in the Achilles tendon as a result of an Australian football game in individuals without a history of lower limb tendinopathy. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Simulation of groundwater flow in the shallow aquifer system of the Delmarva Peninsula, Maryland and Delaware

USGS Publications Warehouse

Sanford, Ward E.; Pope, Jason P.; Selnick, David L.; Stumvoll, Ryan F.

2012-01-01

Estimating future loadings of nitrogen to the Chesapeake Bay requires knowledge about the groundwater flow system and the traveltime of water and chemicals between recharge at the water table and the discharge to streams and directly to the bay. The Delmarva Peninsula has a relatively large proportion of its land devoted to agriculture and a large associated nitrogen load in groundwater that has the potential to enter the bay in discharging groundwater. To better understand the shallow aquifer system with respect to this loading and the traveltime to the bay, the U.S. Geological Survey constructed a steady-state groundwater flow model for the region. The model is based on estimates of recharge calculated using recently developed regression equations for evapotranspiration and surface runoff. The hydrogeologic framework incorporated into the model includes unconfined surficial aquifer sediments, as well as subcropping confined aquifers and confining beds down to 300 feet below land surface. The model was calibrated using 48 water-level measurements and 24 tracer-based ages from wells located across the peninsula. The resulting steady-state flow solution was used to estimate ages of water in the shallow aquifer system through the peninsula and the distribution and magnitude of groundwater traveltime from recharge at the water table to discharge in surface-water bodies (referred to as return time). Return times vary but are typically less than 10 years near local streams and greater than 100 years near the stream divides. The model can be used to calculate nitrate transport parameters in various local watersheds and predict future trends in nitrate loadings to Chesapeake Bay for different future nitrogen application scenarios.

Technology Solutions for New and Existing Homes Case Study: Addressing Multifamily Piping Losses with Solar Hot Water

DOE Office of Scientific and Technical Information (OSTI.GOV)

D. Springer, M. Seitzler, and C. Backman

2016-12-01

Sun Light & Power, a San Francisco Bay Area solar design-build contractor, teamed with the U.S. Department of Energy’s Building America partner the Alliance for Residential Building Innovation (ARBI) to study this heat-loss issue. The team added three-way valves to the solar water heating systems for two 40-unit multifamily buildings. In these systems, when the stored solar hot water is warmer than the recirculated hot water returning from the buildings, the valves divert the returning water to the solar storage tank instead of the water heater. This strategy allows solar-generated heat to be applied to recirculation heat loss in additionmore » to heating water that is consumed by fixtures and appliances.« less

Strategic exploration of battery waste management: A game-theoretic approach.

PubMed

Kaushal, Rajendra Kumar; Nema, Arvind K; Chaudhary, Jyoti

2015-07-01

Electronic waste or e-waste is the fastest growing stream of solid waste today. It contains both toxic substances as well as valuable resources. The present study uses a non-cooperative game-theoretic approach for efficient management of e-waste, particularly batteries that contribute a major portion of any e-waste stream and further analyses the economic consequences of recycling of these obsolete, discarded batteries. Results suggest that the recycler would prefer to collect the obsolete batteries directly from the consumer rather than from the manufacturer, only if, the incentive return to the consumer is less than 33.92% of the price of the battery, the recycling fee is less than 6.46% of the price of the battery, and the price of the recycled material is more than 31.08% of the price of the battery. The manufacturer's preferred choice of charging a green tax from the consumer can be fruitful for the battery recycling chain. © The Author(s) 2015.

Interfacing with Legacy using Remote Method Invocation

NASA Technical Reports Server (NTRS)

Howard, Scott M.

1998-01-01

The assignment described was enough to make a neophyte Java developer bolt for the door: provide a remote method for use by an applet which invokes a native method that wraps a function in an existing legacy library. The purpose of the remote method is to return an instance of a class object whose contents reflect the data structure returned by the legacy function. While embroiled in implementation, I would have spent the time wading through their JNI use group archive as well, but I couldn't seem to locate one. Subsequently, I made the decision to try to document my findings in order to assist others. Before we start on the class design, let's look at what the existing legacy code does. The C function to be called, Get-Legacy-Data, consists of two steps: an ASII file is read from the local disk and its contents are parsed into a Legacy_Type structure whose address is passed as an argument by the caller. The legacy code was compiled into a shared object library, legacy. so, using the IRIX 6.2 compiler and then loaded onto the Web server, a Silicon Graphics Indy station loaded with the IRIX 6.4 operating system. As far as the class design is concerned, the first thing required is a class to act as a template for the data structure returned by the legacy function. This class, JLegacy, declares a series of public instance variables which correspond to the members of Legacy_Type and provides a parameterless constructor. This constructor is never called, not even by the native method which allocates the object for return to the remote method. Next, the remote interface declaration for the remote object must be defined. In order for JLegacyRO to implement getJLegacy, JLegacyRO must interface with the existing legacy code through a native method, getn. getn is declared in the JLegacyRO class but implemented in C, just like the legacy code. getn returns a JLegacy instance and is declared static since its implementation is the same for all instances of the JLegacyRO class.

Simulation of Propellant Loading System Senior Design Implement in Computer Algorithm

NASA Technical Reports Server (NTRS)

Bandyopadhyay, Alak

2010-01-01

Propellant loading from the Storage Tank to the External Tank is one of the very important and time consuming pre-launch ground operations for the launch vehicle. The propellant loading system is a complex integrated system involving many physical components such as the storage tank filled with cryogenic fluid at a very low temperature, the long pipe line connecting the storage tank with the external tank, the external tank along with the flare stack, and vent systems for releasing the excess fuel. Some of the very important parameters useful for design purpose are the prediction of pre-chill time, loading time, amount of fuel lost, the maximum pressure rise etc. The physics involved for mathematical modeling is quite complex due to the fact the process is unsteady, there is phase change as some of the fuel changes from liquid to gas state, then conjugate heat transfer in the pipe walls as well as between solid-to-fluid region. The simulation is very tedious and time consuming too. So overall, this is a complex system and the objective of the work is student's involvement and work in the parametric study and optimization of numerical modeling towards the design of such system. The students have to first become familiar and understand the physical process, the related mathematics and the numerical algorithm. The work involves exploring (i) improved algorithm to make the transient simulation computationally effective (reduced CPU time) and (ii) Parametric study to evaluate design parameters by changing the operational conditions

Termites utilise clay to build structural supports and so increase foraging resources.

PubMed

Oberst, Sebastian; Lai, Joseph C S; Evans, Theodore A

2016-02-08

Many termite species use clay to build foraging galleries and mound-nests. In some cases clay is placed within excavations of their wooden food, such as living trees or timber in buildings; however the purpose for this clay is unclear. We tested the hypotheses that termites can identify load bearing wood, and that they use clay to provide mechanical support of the load and thus allow them to eat the wood. In field and laboratory experiments, we show that the lower termite Coptotermes acinaciformis, the most basal species to build a mound-nest, can distinguish unloaded from loaded wood, and use clay differently when eating each type. The termites target unloaded wood preferentially, and use thin clay sheeting to camouflage themselves while eating the unloaded wood. The termites attack loaded wood secondarily, and build thick, load-bearing clay walls when they do. The termites add clay and build thicker walls as the load-bearing wood is consumed. The use of clay to support wood under load unlocks otherwise unavailable food resources. This behaviour may represent an evolutionary step from foraging behaviour to nest building in lower termites.

Returning vacationers face heavy reading loads. [Reports, surveys and projections on the national energy supply

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berg, T.F.

1991-10-01

This article reviews the various reports, surveys and projections on the national energy supply of the summer of 1991. Discussed are the natural gas supplies, competitive electric power production, reliability of independent power, public attitudes toward natural gas, the market share of natural gas, and projection of US energy supply and demand.

KSC-04pd1269

NASA Image and Video Library

2004-04-28

KENNEDY SPACE CENTER, FLA. - With employees walking alongside, the external tank atop its transporter turns the corner from the Vehicle Assembly Building toward the Turn Basin and the Banana River. The tank will be loaded onto the waiting barge and transferred to the Michoud Space Systems Assembly Facility near New Orleans where redesign of the external tank is underway for Return to Flight.

KSC-04pd1268

NASA Image and Video Library

2004-04-28

KENNEDY SPACE CENTER, FLA. - Atop a transporter, the external tank seen here turns the corner from the Vehicle Assembly Building toward the Turn Basin and the Banana River. The tank will be loaded onto the waiting barge and transferred to the Michoud Space Systems Assembly Facility near New Orleans where redesign of the external tank is underway for Return to Flight.

KSC-04PD-1269

NASA Technical Reports Server (NTRS)

2004-01-01

KENNEDY SPACE CENTER, FLA. With employees walking alongside, the external tank atop its transporter turns the corner from the Vehicle Assembly Building toward the Turn Basin and the Banana River. The tank will be loaded onto the waiting barge and transferred to the Michoud Space Systems Assembly Facility near New Orleans where redesign of the external tank is underway for Return to Flight.

KSC-04PD-1268

NASA Technical Reports Server (NTRS)

2004-01-01

KENNEDY SPACE CENTER, FLA. Atop a transporter, the external tank seen here turns the corner from the Vehicle Assembly Building toward the Turn Basin and the Banana River. The tank will be loaded onto the waiting barge and transferred to the Michoud Space Systems Assembly Facility near New Orleans where redesign of the external tank is underway for Return to Flight.

Commission on Undergraduate Education in the Biological Sciences News, Volume 7, Number 1.

ERIC Educational Resources Information Center

Kormondy, Edward J.

Included is a preliminary report of the analysis of questionnaires returned by biologists teaching in two-year colleges. Data are provided on areas of training, type of previous employment, types of courses taught, measures of teaching load, journals used, and salaries and grants received. The reported information includes the following: two-year…

46 CFR 160.151-57 - Servicing procedure.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) It has no expiration date; or (iii) It is to return to service in an item of survival equipment, but... its weight loss exceeds five percent of the weight of the charge, it must be recharged. (c) When an... servicing of a davit-launched liferaft, the launching-load test in paragraph 2/5.2 of IMO Resolution A.689...

Elucidating the Role of Joint Disuse in the Development of Osteoarthritis following Return to High-Impact Loading

DTIC Science & Technology

2017-04-01

20 week old age point revealed a lack of response to joint unloading of the articular cartilage tidemark (interface of uncalcified and calcified...hallmark of disuse within this study. With this lack of response evident in our joint disuse model for 2 weeks of joint unloading for slightly older

Effects of prescribed fire on wildlife and wildlife habitat in selected ecosystems of North America

Treesearch

William M. Block; L. Mike Conner; Paul A. Brewer; Paulette Ford; Jonathan Haufler; Andrea Litt; Ronald E. Masters; Laura R. Mitchell; Jane Park

2016-01-01

Prescribed fire is applied widely as a management tool in North America to meet various objectives such as reducing fuel loads and fuel continuity, returning fire to an ecosystem, enhancing wildlife habitats, improving forage, preparing seedbeds, improving watershed conditions, enhancing nutrient cycling, controlling exotic weeds, and enhancing resilience from...

76 FR 41045 - Special Conditions; Gulfstream Aerospace LP (GALP) Model G250 Airplane, Design Roll-Maneuver...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-13

... with electronic flight controls as they relate to design roll-maneuver requirements. The applicable... load condition at design maneuvering speed V A , in which the cockpit roll control is returned to... neutral position. 3. At design cruising speed V C , the cockpit roll control must be moved suddenly and...

77 FR 70384 - Special Conditions: Embraer S.A., Model EMB-550 Airplane; Design Roll Maneuver for Electronic...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-26

... design roll maneuver for electronic flight controls, specifically an electronic flight control system... load condition at design maneuvering speed (V A ), in which the cockpit roll control is returned to...-550 airplanes. 1. Design Roll Maneuver for Electronic Flight Controls. In lieu of compliance to 14 CFR...

Nurse Refresher Students Get a Hand from Handhelds

ERIC Educational Resources Information Center

Colevins, Helen; Bond, Diana; Clark, Kathy

2006-01-01

Returning registered nurses face an uphill challenge when re-entering their field. To help ease the technology shock for nurses who have been out of the field for more than 5 years, info pros in one medical library collaborated with administrators of a nursing education program to purchase Personal Digital Assistants (PDAs) and load them with…

The Automated Logistics Element Planning System (ALEPS)

NASA Technical Reports Server (NTRS)

Schwaab, Douglas G.

1991-01-01

The design and functions of ALEPS (Automated Logistics Element Planning System) is a computer system that will automate planning and decision support for Space Station Freedom Logistical Elements (LEs) resupply and return operations. ALEPS provides data management, planning, analysis, monitoring, interfacing, and flight certification for support of LE flight load planning activities. The prototype ALEPS algorithm development is described.

MSC/NASTRAN DMAP Alter Used for Closed-Form Static Analysis With Inertia Relief and Displacement-Dependent Loads

NASA Technical Reports Server (NTRS)

1996-01-01

Solving for the displacements of free-free coupled systems acted upon by static loads is a common task in the aerospace industry. Often, these problems are solved by static analysis with inertia relief. This technique allows for a free-free static analysis by balancing the applied loads with the inertia loads generated by the applied loads. For some engineering applications, the displacements of the free-free coupled system induce additional static loads. Hence, the applied loads are equal to the original loads plus the displacement-dependent loads. A launch vehicle being acted upon by an aerodynamic loading can have such applied loads. The final displacements of such systems are commonly determined with iterative solution techniques. Unfortunately, these techniques can be time consuming and labor intensive. Because the coupled system equations for free-free systems with displacement-dependent loads can be written in closed form, it is advantageous to solve for the displacements in this manner. Implementing closed-form equations in static analysis with inertia relief is analogous to implementing transfer functions in dynamic analysis. An MSC/NASTRAN (MacNeal-Schwendler Corporation/NASA Structural Analysis) DMAP (Direct Matrix Abstraction Program) Alter was used to include displacement-dependent loads in static analysis with inertia relief. It efficiently solved a common aerospace problem that typically has been solved with an iterative technique.

Consumer views on a new holistic screening tool for supportive and palliative-care needs: Sheffield Profile for Assessment and Referral for Care (SPARC): a survey of self-help support groups in health care.

PubMed

Hughes, Philippa; Ahmed, Nisar; Winslow, Michelle; Walters, Stephen J; Collins, Karen; Noble, Bill

2015-08-01

Sheffield Profile for Assessment and Referral for Care (SPARC) was developed in response to concerns that palliative care may not be reaching all people who could benefit from it. Acceptability of the tool is an important step in developing its future use. To elicit the views of a wide variety of members of consumer and self-help support groups concerned with health care on the relevance, acceptability and the overall perception of using SPARC as an early holistic needs assessment tool in supportive and palliative care. This study was conducted in South Yorkshire and North Derbyshire (UK). Ninety-nine consumer and self-help groups were identified from information in the public domain. Thirty-eight groups participated. Packs containing study information and self-complete postal questionnaires were distributed to groups, and they were asked to circulate these to their members. Completed questionnaires were returned in pre-paid envelopes to the research team. 135 questionnaires and feedback forms were returned. The majority of respondents found SPARC easy to understand (93% (120/129; 95% Confidence Interval 87% to 96%) and complete (94% (125/133; 95% CI: 88% to 97%). A minority, 12.2% (16/131), of respondents found questions on SPARC 'too sensitive'. Overall, respondents considered SPARC an acceptable and relevant tool for clinical assessment of supportive and palliative-care needs. Whilst a small minority of people found SPARC difficult to understand (i.e. patients with cognitive impairments), most categories of service user found it relevant. Clinical studies are necessary to establish the clinical utility of SPARC. © 2013 John Wiley & Sons Ltd.

High dietary fat intake increases fat oxidation and reduces skeletal muscle mitochondrial respiration in trained humans.

PubMed

Leckey, Jill J; Hoffman, Nolan J; Parr, Evelyn B; Devlin, Brooke L; Trewin, Adam J; Stepto, Nigel K; Morton, James P; Burke, Louise M; Hawley, John A

2018-06-01

High-fat, low-carbohydrate (CHO) diets increase whole-body rates of fat oxidation and down-regulate CHO metabolism. We measured substrate utilization and skeletal muscle mitochondrial respiration to determine whether these adaptations are driven by high fat or low CHO availability. In a randomized crossover design, 8 male cyclists consumed 5 d of a high-CHO diet [>70% energy intake (EI)], followed by 5 d of either an isoenergetic high-fat (HFAT; >65% EI) or high-protein diet (HPRO; >65% EI) with CHO intake clamped at <20% EI. During the intervention, participants undertook daily exercise training. On d 6, participants consumed a high-CHO diet before performing 100 min of submaximal steady-state cycling plus an ∼30-min time trial. After 5 d of HFAT, skeletal muscle mitochondrial respiration supported by octanoylcarnitine and pyruvate, as well as uncoupled respiration, was decreased at rest, and rates of whole-body fat oxidation were higher during exercise compared with HPRO. After 1 d of high-CHO diet intake, mitochondrial respiration returned to baseline values in HFAT, whereas rates of substrate oxidation returned toward baseline in both conditions. These findings demonstrate that high dietary fat intake, rather than low-CHO intake, contributes to reductions in mitochondrial respiration and increases in whole-body rates of fat oxidation after a consuming a high-fat, low-CHO diet.-Leckey, J. J., Hoffman, N. J., Parr, E. B., Devlin, B. L., Trewin, A. J., Stepto, N. K., Morton, J. P., Burke, L. M., Hawley, J. A. High dietary fat intake increases fat oxidation and reduces skeletal muscle mitochondrial respiration in trained humans.

Trends in phosphorus loading to the western basin of Lake ...

EPA Pesticide Factsheets

Dave Dolan spent much of his career computing and compiling phosphorus loads to the Great Lakes. None of his work in this area has been more valuable than his continued load estimates to Lake Erie, which has allowed us to unambiguously interpret the cyanobacteria blooms and hypoxia development in the lake. To help understand the re-occurrence of cyanobacteria blooms in the Western Basin of Lake Erie, we have examined the phosphorus loading to the Western Basin over the past 15 years. Furthermore, we have examined the relative contributions from various tributaries and the Detroit River. On an annual basis the total phosphorus load has not exhibited a trend, other than being well correlated with flow from major tributaries. However, the dissolved reactive phosphorus (DRP) load has trended upward, returning to levels observed in the mid-1970s. This increase has largely been attributed to the increase in flow-weighted DRP concentration in the Maumee River. Over the period, about half of the phosphorus load comes from the Maumee River with the other half coming from the Detroit River; other tributaries contribute much small amounts to the load. Seasonal analysis shows the highest percentage of the load occurs in the spring during high flow events. We are very grateful to our friend Dave for making this type of analysis possible not applicable

Common drive to the upper airway muscle genioglossus during inspiratory loading

PubMed Central

Woods, Michael J.; Nicholas, Christian L.; Semmler, John G.; Chan, Julia K. M.; Jordan, Amy S.

2015-01-01

Common drive is thought to constitute a central mechanism by which the efficiency of a motor neuron pool is increased. This study tested the hypothesis that common drive to the upper airway muscle genioglossus (GG) would increase with increased respiratory drive in response to an inspiratory load. Respiration, GG electromyographic (EMG) activity, single-motor unit activity, and coherence in the 0–5 Hz range between pairs of GG motor units were assessed for the 30 s before an inspiratory load, the first and second 30 s of the load, and the 30 s after the load. Twelve of twenty young, healthy male subjects provided usable data, yielding 77 pairs of motor units: 2 Inspiratory Phasic, 39 Inspiratory Tonic, 15 Expiratory Tonic, and 21 Tonic. Respiratory and GG inspiratory activity significantly increased during the loads and returned to preload levels during the postload periods (all showed significant quadratic functions over load trials, P < 0.05). As hypothesized, common drive increased during the load in inspiratory modulated motor units to a greater extent than in expiratory/tonic motor units (significant load × discharge pattern interaction, P < 0.05). Furthermore, this effect persisted during the postload period. In conclusion, common drive to inspiratory modulated motor units was elevated in response to increased respiratory drive. The postload elevation in common drive was suggestive of a poststimulus activation effect. PMID:26378207

Soyuz 22 Return Samples: Assessment of Air Quality Aboard the International Space Station

NASA Technical Reports Server (NTRS)

Jams, John T.

2010-01-01

Three mini-grab sample containers (m-GSCs) were returned aboard Soyuz 22 because of concerns that new air pollutants were present in the air and these were getting into the water recovery system. The Total Organic Carbon Analyzer had been giving increasing readings of total organic carbon (TOC) in the potable water, and it was postulated that an increased load into the system was responsible. The toxicological assessment of 3 m-GSCs from the ISS is shown in Table 1. The recoveries of the 3 standards (as listed above) from the GSCs averaged 103, 95 and 76%, respectively. Recovery from formaldehyde control badges were 90 and 91%.

Assessment of an alternative postdeployment reintegration strategy with soldiers returning from Iraq.

PubMed

Sipos, Maurice L; Foran, Heather M; Wood, Michael D; Wright, Kathleen M; Barnhart, Vincent J; Riviere, Lyndon A; Adler, Amy B

2014-05-01

The present study examined behavioral health outcomes, risk behaviors, aggression, alcohol misuse, marital satisfaction, and attitudes toward reintegration associated with an alternative, front-loaded reintegration strategy compared with a more standardized reintegration process in soldiers returning from combat deployments. The type of reintegration strategy used did not predict differences in posttraumatic stress disorder (PTSD) symptoms, alcohol misuse, aggression, and marital satisfaction, although slightly higher reports of risk behaviors were found in the unit using the standard reintegration approach even after controlling for demographic covariates and combat exposure. These findings may help guide leadership when making decisions regarding reintegration approaches in the future. PsycINFO Database Record (c) 2014 APA, all rights reserved.

Mechanical energy absorber

NASA Technical Reports Server (NTRS)

Wesselski, Clarence J. (Inventor)

1993-01-01

An energy absorbing system for controlling the force where a moving object engages a stationary stop and where the system utilized telescopic tubular members, energy absorbing diaphragm elements, force regulating disc springs, and a return spring to return the telescoping member to its start position after stroking is presented. The energy absorbing system has frusto-conical diaphragm elements frictionally engaging the shaft and are opposed by a force regulating set of disc springs. In principle, this force feedback mechanism serves to keep the stroking load at a reasonable level even if the friction coefficient increases greatly. This force feedback device also serves to desensitize the singular and combined effects of manufacturing tolerances, sliding surface wear, temperature changes, dynamic effects, and lubricity.

Fiber-reinforced dielectric elastomer laminates with integrated function of actuating and sensing

NASA Astrophysics Data System (ADS)

Li, Tiefeng; Xie, Yuhan; Li, Chi; Yang, Xuxu; Jin, Yongbin; Liu, Junjie; Huang, Xiaoqiang

2015-04-01

The natural limbs of animals and insects integrate muscles, skins and neurons, providing both the actuating and sensing functions simultaneously. Inspired by the natural structure, we present a novel structure with integrated function of actuating and sensing with dielectric elastomer (DE) laminates. The structure can deform when subjected to high voltage loading and generate corresponding output signal in return. We investigate the basic physical phenomenon of dielectric elastomer experimentally. It is noted that when applying high voltage, the actuating dielectric elastomer membrane deforms and the sensing dielectric elastomer membrane changes the capacitance in return. Based on the concept, finite element method (FEM) simulation has been conducted to further investigate the electromechanical behavior of the structure.

Implications of deregulation in natural gas industry on utility risks and returns

NASA Astrophysics Data System (ADS)

Addepalli, Rajendra P.

This thesis examines the changes in risk and required return on capital for local distribution utility companies in the increasingly competitive natural gas industry. The deregulation in the industry impacts the LDCs in several ways. First, with the introduction of competition consumers have been given choices among suppliers besides the traditional monopoly, the local utility, for purchasing their natural gas supply needs. Second, with the introduction of competition, some of the interstate pipelines were stuck with 'Take Or Pay' contracts and other costs that resulted in 'stranded costs', which have been passed on to customers of the pipeline including the LDCs. Third, the new obligation for the LDCs to purchase gas from the market, as opposed to buying it from pipelines and passing on the costs to its customers, brought opportunities and risks as well. Finally, with the introduction of competition, in some states LDCs have been allowed to enter into unregulated ventures to increase their profits. In the thesis we first develop a multifactor model (MFM) to explain historical common stock returns of individual utilities and of utility portfolios. We use 'rolling regression' analysis to analyze how different variables explain the variation in stock returns over time. Second, we conduct event studies to analyze the events in the deregulation process that had significant impacts on the LDC returns. Finally we assess the changes in risk and required return on capital for the LDCs over a 15 year time frame, covering the deregulation period. We employ four aspects in the examination of risk and return profile of the utilities: measuring (a) changes in required return on common equity and Weighted Average Cost of Capital, (b) changes in risk premium (WACC less an interest rate proxy), (c) changes in utility bond ratings, and (d) changes in dividend payments, new debt and equity issuances. We perform regression analysis to explain the changes in the required WACC using new security issuances, dividend payments and revenues of the companies.

Media advertising effects on consumer perception of orthodontic treatment quality.

PubMed

Edwards, Daenya T; Shroff, Bhavna; Lindauer, Steven J; Fowler, Chad E; Tufekci, Eser

2008-09-01

To determine the effect of media advertising on consumer perception of orthodontic treatment quality. A survey instrument was designed to evaluate factors influencing consumer selection of an orthodontist and consumer perception of different forms of media advertising (radio, television, newspaper, magazine, direct mail, and billboard) by orthodontic practices. The surveys were distributed by eight orthodontic offices in and around the Richmond, Virginia area. The survey return rate was 97%. Respondents most often cited dentist and patient referrals as how they learned of the orthodontic practices they visited (50% to 57%). A caring attitude and good practitioner reputation were the top reasons influencing actual selection of an orthodontist (53% and 49%, respectively). Of respondents, 14% to 24% felt that advertising orthodontists would offer a lower quality of care than nonadvertising orthodontists. Newspaper, magazine, and direct mail advertisements were viewed more favorably than radio, television, and billboard advertisements. Chi-square analyses revealed few statistically significant differences in perception between different income and education groups. The majority of patients do not perceive advertising to reflect poorly on the quality of orthodontic care. However, patients with different income and education levels perceive media advertising differently.

Consumer Perceived Risk, Attitude and Online Shopping Behaviour; Empirical Evidence from Malaysia

NASA Astrophysics Data System (ADS)

Ariff, Mohd Shoki Md; Sylvester, Michele; Zakuan, Norhayati; Ismail, Khalid; Mat Ali, Kamarudin

2014-06-01

The development of e-commerce has increased the popularity of online shopping worldwide. In Malaysia, it was reported that online shopping market size was RM1.8 billion in 2013 and it is estimated to reach RM5 billion by 2015. However, online shopping was rated 11th out of 15 purposes of using internet in 2012. Consumers' perceived risks of online shopping becomes a hot topic to research as it will directly influence users' attitude towards online purchasing, and their attitude will have significant impact to the online purchasing behaviour. The conceptualization of consumers' perceived risk, attitude and online shopping behaviour of this study provides empirical evidence in the study of consumer online behaviour. Four types of risks - product risk, financial, convenience and non-delivery risks - were examined in term of their effect on consumers' online attitude. A web-based survey was employed, and a total of 300 online shoppers of a Malaysia largest online marketplace participated in this study. The findings indicated that product risk, financial and non-delivery risks are hazardous and negatively affect the attitude of online shoppers. Convenience risk was found to have positive effect on consumers' attitude, denoting that online buyers of this site trusted the online seller and they encountered less troublesome with the site. It also implies that consumers did not really concern on non-convenience aspect of online shopping, such as handling of returned products and examine the quality of products featured in the online seller website. The online buyers' attitude was significantly and positively affects their online purchasing behaviour. The findings provide useful model for measuring and managing consumers' perceived risk in internet-based transaction to increase their involvement in online shopping and to reduce their cognitive dissonance in the e-commerce setting.

Research advisory board members' contributions and expectations in the USA.

PubMed

Pinto, R M; Spector, Anya Y; Rahman, R; Gastolomendo, J D

2015-06-01

This study focuses on the Implementation Community Collaborative Board (I-CCB) to identify members' anticipated contributions to and returns from the I-CCB; examine whether or not members achieved these contributions and returns over time; and explore barriers and facilitators that influenced accomplishments. Longitudinal study with repeated semi-structured in-depth interviews; baseline captured anticipated contributions and returns; 6- and 18-month follow-ups short- and longer-term achievements. We used content analysis to code/reduce text into variables, describe, count and compare categories. Participants anticipated involvement in I-CCB dynamics/governance and in research tasks/procedures. Anticipated returns included social support. Participants exerting influence on I-CCB's research agenda stayed the same over time. Participants conducting research doubled between follow-ups; those writing grant proposals increased by 50%. Participants receiving emotional support remained the same. Challenges: meetings steered by researchers; lack of time; use of jargon. Facilitators: outreaching to community; being affected by HIV; having overlapping identities/roles as researcher, service consumer and/or practitioner. Research partners can maximize facilitators, redress barriers and improve advisory board members' retention. Findings may help optimize the functioning of advisory boards worldwide. © The Author (2013). Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Development of an efficient procedure for calculating the aerodynamic effects of planform variation

NASA Technical Reports Server (NTRS)

Mercer, J. E.; Geller, E. W.

1981-01-01

Numerical procedures to compute gradients in aerodynamic loading due to planform shape changes using panel method codes were studied. Two procedures were investigated: one computed the aerodynamic perturbation directly; the other computed the aerodynamic loading on the perturbed planform and on the base planform and then differenced these values to obtain the perturbation in loading. It is indicated that computing the perturbed values directly can not be done satisfactorily without proper aerodynamic representation of the pressure singularity at the leading edge of a thin wing. For the alternative procedure, a technique was developed which saves most of the time-consuming computations from a panel method calculation for the base planform. Using this procedure the perturbed loading can be calculated in about one-tenth the time of that for the base solution.

Suspended-sediment loads in the lower Stillaguamish River, Snohomish County, Washington, 2014–15

USGS Publications Warehouse

Anderson, Scott A.; Curran, Christopher A.; Grossman, Eric E.

2017-08-03

Continuous records of discharge and turbidity at a U.S. Geological Survey (USGS) streamgage in the lower Stillaguamish River were paired with discrete measurements of suspended-sediment concentration (SSC) in order to estimate suspended-sediment loads over the water years 2014 and 2015. First, relations between turbidity and SSC were developed and used to translate the continuous turbidity record into a continuous estimate of SSC. Those concentrations were then used to predict suspended-sediment loads based on the current discharge record, reported at daily intervals. Alternative methods were used to in-fill a small number of days with either missing periods of turbidity or discharge records. Uncertainties in our predictions at daily and annual time scales were estimated based on the parameter uncertainties in our turbidity-SSC regressions. Daily loads ranged from as high as 121,000 tons during a large autumn storm to as low as –56 tons, when tidal return flow moved more sediment upstream than river discharge did downstream. Annual suspended-sediment loads for both water years were close to 1.4 ± 0.2 million tons.

On-Orbit Evaluation of a New Treadmill Harness for Improved Crewmember Comfort and Load Distribution

NASA Technical Reports Server (NTRS)

Perusek, G. P.; Sheehan, C. C.; Savina, M. C.; Owings, T. M.; Davis, B. L.; Ryder, J. W.

2011-01-01

The current design of the International Space Station (ISS) Treadmill Harness has been reported to cause pain and discomfort to crewmembers during exercise. The Harness Station Development Test Objective (SDTO) provided participating crewmembers (n = 6) with a new harness design, the "Glenn Harness," to evaluate for comfort and loading as compared to the current Treadmill Harness. A novel suite of load-sensing instrumentation was developed to noninvasively measure load distribution and provided a first-ever quantification of actual dynamic loads during treadmill exercise. In addition, crew debriefs provided feedback on harness preference and overall impressions. Conclusions: Post-flight analysis in returned Glenn Harnesses (n = 3) showed minimal wear and tear. Four of the six subjects found the Glenn Harness to be more comfortable in this on-orbit, side-by-side comparison as measured by the crew comfort questionnaire and crew debriefs. Specific areas for improvement have been identified, and forward recommendations will be provided to the Human Research Program. The protocol developed for the SDTO provided valuable insight into crew comfort issues, design improvements, and loading preferences for exercise harnessing, which lays the groundwork for better harnessing systems and training protocols.

Control of ventilation during intravenous CO2 loading in the awake dog.

PubMed

Stremel, R W; Huntsman, D J; Casaburi, R; Whipp, B J; Wasserman, K

1978-02-01

The ventilatory response to venous CO2 loading and its effect on arterial CO2 tension was determined in five awake dogs. Blood, 200-500 ml/min, was diverted from a catheter in the right common carotid artery through a membrane gas exchanger and returned to the right jugular vein. CO2 loading was accomplished by changing the gas ventilating the gas exchanger from a mixture of 5% CO2 in air to 100% CO2. The ventilatory responses to this procedure were compared with those resulting from increased inspired CO2 concentrations (during which ventilation of the gas exchanger with the air and 5% CO2 mixture continued). The ventilatory response to each form of CO2 loading was computed as deltaVE/deltaPaco9. The mean ventilatory response to airway CO2 loading was 1.61 1/min per Torr PaCO2. The mean response for the venous CO2 loading was significantly higher and not significantly different from "infinite" CO2 sensitivity (i.e., isocapnic response). The results provide further evidence for a CO2-linked hyperpnea, not mediated by significant changes in mean arterial PCO2.

Faulty gene screen.

PubMed

Allen, Daniel

2007-05-01

'Designer baby' is a loaded phrase. It seems to put children on a par with consumer goods and brings to mind parents who appear more interested in fashion accessories than families. But a story in The Sunday Times (April 1) generated more compassion than scorn for the parents concerned.

Cournot games with network effects for electric power markets

NASA Astrophysics Data System (ADS)

Spezia, Carl John

The electric utility industry is moving from regulated monopolies with protected service areas to an open market with many wholesale suppliers competing for consumer load. This market is typically modeled by a Cournot game oligopoly where suppliers compete by selecting profit maximizing quantities. The classical Cournot model can produce multiple solutions when the problem includes typical power system constraints. This work presents a mathematical programming formulation of oligopoly that produces unique solutions when constraints limit the supplier outputs. The formulation casts the game as a supply maximization problem with power system physical limits and supplier incremental profit functions as constraints. The formulation gives Cournot solutions identical to other commonly used algorithms when suppliers operate within the constraints. Numerical examples demonstrate the feasibility of the theory. The results show that the maximization formulation will give system operators more transmission capacity when compared to the actions of suppliers in a classical constrained Cournot game. The results also show that the profitability of suppliers in constrained networks depends on their location relative to the consumers' load concentration.

Marketing of menthol cigarettes and consumer perceptions: a review of tobacco industry documents.

PubMed

Anderson, Stacey J

2011-05-01

To examine tobacco industry marketing of menthol cigarettes and to determine what the tobacco industry knew about consumer perceptions of menthol. A snowball sampling design was used to systematically search the Legacy Tobacco Documents Library (LTDL) (http://legacy.library.ucsf.edu) between 28 February and 27 April 2010. Of the approximately 11 million documents available in the LTDL, the iterative searches returned tens of thousands of results from the major US tobacco companies and affiliated organisations. A collection of 953 documents from the 1930s to the first decade of the 21st century relevant to 1 or more of the research questions were qualitatively analysed, as follows: (1) are/were menthol cigarettes marketed with health reassurance messages? (2) What other messages come from menthol cigarette advertising? (3) How do smokers view menthol cigarettes? (4) Were menthol cigarettes marketed to specific populations? Menthol cigarettes were marketed as, and are perceived by consumers to be, healthier than non-menthol cigarettes. Menthol cigarettes are also marketed to specific social and demographic groups, including African-Americans, young people and women, and are perceived by consumers to signal social group belonging. The tobacco industry knew consumers perceived menthol as healthier than non-menthol cigarettes, and this was the intent behind marketing. Marketing emphasising menthol attracts consumers who may not otherwise progress to regular smoking, including young, inexperienced users and those who find 'regular' cigarettes undesirable. Such marketing may also appeal to health-concerned smokers who might otherwise quit.

Toxicity potentials from waste cellular phones, and a waste management policy integrating consumer, corporate, and government responsibilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lim, Seong-Rin; Schoenung, Julie M., E-mail: jmschoenung@ucdavis.ed

Cellular phones have high environmental impact potentials because of their heavy metal content and current consumer attitudes toward purchasing new phones with higher functionality and neglecting to return waste phones into proper take-back systems. This study evaluates human health and ecological toxicity potentials from waste cellular phones; highlights consumer, corporate, and government responsibilities for effective waste management; and identifies key elements needed for an effective waste management strategy. The toxicity potentials are evaluated by using heavy metal content, respective characterization factors, and a pathway and impact model for heavy metals that considers end-of-life disposal in landfills or by incineration. Cancermore » potentials derive primarily from Pb and As; non-cancer potentials primarily from Cu and Pb; and ecotoxicity potentials primarily from Cu and Hg. These results are not completely in agreement with previous work in which leachability thresholds were the metric used to establish priority, thereby indicating the need for multiple or revised metrics. The triple bottom line of consumer, corporate, and government responsibilities is emphasized in terms of consumer attitudes, design for environment (DfE), and establishment and implementation of waste management systems including recycling streams, respectively. The key strategic elements for effective waste management include environmental taxation and a deposit-refund system to motivate consumer responsibility, which is linked and integrated with corporate and government responsibilities. The results of this study can contribute to DfE and waste management policy for cellular phones.« less

Toxicity potentials from waste cellular phones, and a waste management policy integrating consumer, corporate, and government responsibilities.

PubMed

Lim, Seong-Rin; Schoenung, Julie M

2010-01-01

Cellular phones have high environmental impact potentials because of their heavy metal content and current consumer attitudes toward purchasing new phones with higher functionality and neglecting to return waste phones into proper take-back systems. This study evaluates human health and ecological toxicity potentials from waste cellular phones; highlights consumer, corporate, and government responsibilities for effective waste management; and identifies key elements needed for an effective waste management strategy. The toxicity potentials are evaluated by using heavy metal content, respective characterization factors, and a pathway and impact model for heavy metals that considers end-of-life disposal in landfills or by incineration. Cancer potentials derive primarily from Pb and As; non-cancer potentials primarily from Cu and Pb; and ecotoxicity potentials primarily from Cu and Hg. These results are not completely in agreement with previous work in which leachability thresholds were the metric used to establish priority, thereby indicating the need for multiple or revised metrics. The triple bottom line of consumer, corporate, and government responsibilities is emphasized in terms of consumer attitudes, design for environment (DfE), and establishment and implementation of waste management systems including recycling streams, respectively. The key strategic elements for effective waste management include environmental taxation and a deposit-refund system to motivate consumer responsibility, which is linked and integrated with corporate and government responsibilities. The results of this study can contribute to DfE and waste management policy for cellular phones. 2010 Elsevier Ltd. All rights reserved.

A longitudinal study of work load and variations in psychological well-being, cortisol, smoking, and alcohol consumption.

PubMed

Steptoe, A; Wardle, J; Lipsey, Z; Mills, R; Oliver, G; Jarvis, M; Kirschbaum, C

1998-01-01

The effects of variations in work load (indexed by paid work hours) on psychological well-being, cortisol, smoking, and alcohol consumption were examined in a sample of 71 workers (44 women, 27 men) in the retail industry. Measures were obtained on four occasions over a six-month period, and assessments were ranked individually according to hours of work over the past seven days. Job strain (demand/control) and job social support were evaluated as potential moderators of responses. Paid work hours ranged from a mean of 32.6 to 48.0 hours per week, and ratings of work-home conflict and perceived stress varied across assessments. Salivary cortisol was inversely associated with job strain and did not vary across sessions. Female but not male smokers consumed more cigarettes during periods of long work hours, and self-reported smoking and cotinine concentrations were greater among smokers with higher nicotine dependency scores. Men but not women with poor social supports consumed more alcohol as work hours lengthened. These data indicate that health behaviors are affected only to a limited extent by variations in work load. Results are discussed in the context of adaptation to work and the pathways linking stressful experience with health risk.

Marketing and semiotic approach on communication. Consequences on knowledge of target-audiences.

PubMed

Borţun, D; Purcarea, V L

2013-03-15

Modern marketing puts the consumer and not the manufacturer in the center, the essence of the marketing approach being the conception, the projection and the making of the product, starting from the consumer towards the manufacturer; this resulting in the fact that the product's marketing approach seems strikingly similar to the semiotic approach of the message. In the semiotic approach, the message is a construction of signs, which, by interacting with the receiver, produces the meaning. The transmitter (the message transmitter) becomes less important. The focus is centered to the "text" and the way this is "read", the sense being born when the "reader" negotiates the "text". The negotiation takes place when the "reader" filtrates the message through the sieve of his cultural loading. A "target public" is a group which is specific to a certain Cultural Loading, a loading which deals with linguistic, logical, psychological and symbolic structures, which get out to meet the message and "negotiates" with the structures similar to it. When we are thinking in terms of the semiotic approach, we are handling the cultural determinism of communication, using the concepts of Kuhn and Gonseth (paradigm and referential). They open a new path in the market research, in the market segmentation and knowledge of the "target audiences".

Application of an impedance matching transformer to a plasma focus.

PubMed

Bures, B L; James, C; Krishnan, M; Adler, R

2011-10-01

A plasma focus was constructed using an impedance matching transformer to improve power transfer between the pulse power and the dynamic plasma load. The system relied on two switches and twelve transformer cores to produce a 100 kA pulse in short circuit on the secondary at 27 kV on the primary with 110 J stored. With the two transformer systems in parallel, the Thevenin equivalent circuit parameters on the secondary side of the driver are: C = 10.9 μF, V(0) = 4.5 kV, L = 17 nH, and R = 5 mΩ. An equivalent direct drive circuit would require a large number of switches in parallel, to achieve the same Thevenin equivalent. The benefits of this approach are replacement of consumable switches with non-consumable transformer cores, reduction of the driver inductance and resistance as viewed by the dynamic load, and reduction of the stored energy to produce a given peak current. The system is designed to operate at 100 Hz, so minimizing the stored energy results in less load on the thermal management system. When operated at 1 Hz, the neutron yield from the transformer matched plasma focus was similar to the neutron yield from a conventional (directly driven) plasma focus at the same peak current.

Calculation of reinforced-concrete frame strength under a simultaneous static cross section load and a column lateral impact

DOE Office of Scientific and Technical Information (OSTI.GOV)

Belov, Nikolay, E-mail: n.n.belov@mail.ru; Kopanitsa, Dmitry, E-mail: kopanitsa@mail.ru; Yugov, Alexey, E-mail: yugalex@mail.ru

When designing buildings with reinforced concrete that are planned to resist dynamic loads it is necessary to calculate this structural behavior under operational static and emergency impact and blast loads. Calculations of the structures under shock-wave loads can be performed by solving dynamic equations that do not consider static loads. Due to this fact the calculation of reinforced concrete frame under a simultaneous static and dynamic load in full 3d settings becomes a very non trivial and resource consuming problem. This problem can be split into two tasks. The first one is a shock-wave problem that can be solved usingmore » software package RANET-3, which allows solving the problem using finite elements method adapted for dynamic task. This method calculates strain-stress state of the material and its dynamic destruction, which is considered as growth and consolidation of micro defects under loading. On the second step the results of the first step are taken as input parameters for quasi static calculation of simultaneous static and dynamic load using finite elements method in AMP Civil Engineering-11.« less

Development of a Consumable Inventory Management Strategy for the Supply Management Unit

DTIC Science & Technology

2007-12-01

should be either returned to the supplier for partial credit or sent to disposal. This means that based 52 upon current and projected consumption ...economical to maintain based upon current and projected consumption rates. The magnitude of the feasible excess is driven by the base stock level prescribed...Days of Supply model to establish Requisitioning Objectives (RO) and Reorder Points (ROP), which are based upon historical usage, lead time, and supply

Method to Select Technical Terms for Glossaries in Support of Joint Task Force Operations

DTIC Science & Technology

2012-01-01

have been prohibitively time-consuming. Instead, we identified two publicly available terminology extractor tools: TerMine (NaCTEM, 2011) and Alchemy ...and that from the latter, by high recall. The Alchemy approach contrasts with that used in TerMine in that Alchemy will process the text with...information categories, such as person, location, and organization, in addition to returning topic keywords. Output from both TerMine and Alchemy

Department of Defense Strategic Sustainability Performance Plan

DTIC Science & Technology

2010-08-26

Evaluating and Prioritizing the Use of Resources A. Evaluating Return on Investment B. Factors in Acquisition and Procurement Decisions C... capacity . Convoy of Fuel and Other Supplies,  Afghanistan • A final challenge is grid vulnerability. DoD’s reliance on a fragile commercial grid to...10 percent of the energy consumed by the Department came from renewable sources when thermal sources were included, such as cogeneration and

MLP-1 on Crawler Transporter 2 (CT-2)

NASA Image and Video Library

2017-03-22

NASA's upgraded crawler-transporter 2 (CT-2), carrying mobile launcher platform 1, moves slowly along the crawlerway toward the Vehicle Assembly Building at the agency's Kennedy Space Center in Florida. The crawler's upgrades and modifications were monitored and tested during a loaded test to the crawlerway Pad A/B split. CT-2 will return to the crawler yard. The crawler is being tested to confirm it is ready to support the load of the mobile launcher carrying the Space Launch System with Orion atop for the first test flight, Exploration Mission 1. The Ground Systems Development and Operations Program at Kennedy is managing upgrades to the crawler.

Variable frequency inverter for ac induction motors with torque, speed and braking control

NASA Technical Reports Server (NTRS)

Nola, F. J. (Inventor)

1975-01-01

A variable frequency inverter was designed for driving an ac induction motor which varies the frequency and voltage to the motor windings in response to varying torque requirements for the motor so that the applied voltage amplitude and frequency are of optimal value for any motor load and speed requirement. The slip frequency of the motor is caused to vary proportionally to the torque and feedback is provided so that the most efficient operating voltage is applied to the motor. Winding current surge is limited and a controlled negative slip causes motor braking and return of load energy to a dc power source.

The role of personal values in Chinese consumers' food consumption decisions. A case study of healthy drinks.

PubMed

Lee, Pui Yee; Lusk, Karen; Mirosa, Miranda; Oey, Indrawati

2014-02-01

Differences in culture, language, and behavior between Chinese and Western consumers make entering the Chinese market a challenge. Chinese consumers may desire similar product features (e.g. brand name, quality, and flavor) to Western consumers but the value that consumers attach to the same product may differ cross-nationally. Besides values, an understanding of desired product attributes and the consequences linking to these values is also important. To the authors' knowledge, there is no published scientific research that investigates how personal values influence Chinese consumers' food consumption decisions. The aim of this research was to identify the links among product attributes, consequences of these attributes, and personal values associated with healthy drink consumption decisions within the Chinese market. Specifically, this research employed means-end chain theory and used association pattern technique (APT) as the main data collection technique to identify these links. Focus groups (n=6) were held in Hangzhou, China to identify the important attributes and consequences involved in the consumption decisions of healthy drinks. These attributes and consequences along with Schwartz's 10 basic values were used to construct the matrices included in the APT survey. A total of 600 APT surveys were administered in six different companies in Hangzhou, with 570 returned. Construction of the hierarchical value map (HVM) identified four of Schwartz's personal values influencing Chinese consumers' healthy drink consumption decisions: security, hedonism, benevolence, and self-direction. Food safety was the foremost concern for Chinese consumers when choosing healthy drinks. Chinese consumers also sought a good tasting and nutritious drink that was good value for money. Results from this study provide food marketers with an in-depth understanding of Chinese consumers' healthy drink consumption decisions. Implications and recommendations are provided that will assist food marketers to effectively enact marketing strategies in China. Copyright © 2013 Elsevier Ltd. All rights reserved.

Involvement of consumers in studies run by the Medical Research Council Clinical Trials Unit: Results of a survey

PubMed Central

2012-01-01

Background We aimed to establish levels of consumer involvement in randomised controlled trials (RCTs), meta-analyses and other studies carried out by the UK Medical Research Council (MRC) Clinical Trials Unit across the range of research programs, predominantly in cancer and HIV. Methods Staff responsible for studies that were included in a Unit Progress Report (MRC CTU, April 2009) were asked to complete a semi-structured questionnaire survey regarding consumer involvement. This was defined as active involvement of consumers as partners in the research process and not as subjects of that research. The electronic questionnaires combined open and closed questions, intended to capture quantitative and qualitative information on whether studies had involved consumers; types of activities undertaken; recruitment and support; advantages and disadvantages of involvement and its perceived impact on aspects of the research. Results Between October 2009 and April 2010, 138 completed questionnaires (86%) were returned. Studies had been conducted over a 20 year period from 1989, and around half were in cancer; 30% in HIV and 20% were in other disease areas including arthritis, tuberculosis and blood transfusion medicine. Forty-three studies (31%) had some consumer involvement, most commonly as members of trial management groups (TMG) [88%]. A number of positive impacts on both the research and the researcher were identified. Researchers generally felt involvement was worthwhile and some felt that consumer involvement had improved the credibility of the research. Benefits in design and quality, trial recruitment, dissemination and decision making were also perceived. Researchers felt they learned from consumer involvement, albeit that there were some barriers. Conclusions Whilst most researchers identified benefits of involving consumers, most of studies included in the survey had no involvement. Information from this survey will inform the development of a unit policy on consumer involvement, to guide future research conducted within the MRC Clinical Trials Unit and beyond. PMID:22243649

Involvement of consumers in studies run by the Medical Research Council Clinical Trials Unit: results of a survey.

PubMed

Vale, Claire L; Thompson, Lindsay C; Murphy, Claire; Forcat, Silvia; Hanley, Bec

2012-01-13

We aimed to establish levels of consumer involvement in randomised controlled trials (RCTs), meta-analyses and other studies carried out by the UK Medical Research Council (MRC) Clinical Trials Unit across the range of research programs, predominantly in cancer and HIV. Staff responsible for studies that were included in a Unit Progress Report (MRC CTU, April 2009) were asked to complete a semi-structured questionnaire survey regarding consumer involvement. This was defined as active involvement of consumers as partners in the research process and not as subjects of that research. The electronic questionnaires combined open and closed questions, intended to capture quantitative and qualitative information on whether studies had involved consumers; types of activities undertaken; recruitment and support; advantages and disadvantages of involvement and its perceived impact on aspects of the research. Between October 2009 and April 2010, 138 completed questionnaires (86%) were returned. Studies had been conducted over a 20 year period from 1989, and around half were in cancer; 30% in HIV and 20% were in other disease areas including arthritis, tuberculosis and blood transfusion medicine. Forty-three studies (31%) had some consumer involvement, most commonly as members of trial management groups (TMG) [88%]. A number of positive impacts on both the research and the researcher were identified. Researchers generally felt involvement was worthwhile and some felt that consumer involvement had improved the credibility of the research. Benefits in design and quality, trial recruitment, dissemination and decision making were also perceived. Researchers felt they learned from consumer involvement, albeit that there were some barriers. Whilst most researchers identified benefits of involving consumers, most of studies included in the survey had no involvement. Information from this survey will inform the development of a unit policy on consumer involvement, to guide future research conducted within the MRC Clinical Trials Unit and beyond.

Irrigation efficiency and quality of irrigation return flows in the Ebro River Basin: an overview.

PubMed

Causapé, J; Quílez, D; Aragüés, R

2006-06-01

The review analysis of twenty two irrigation efficiency (IE) studies carried out in the Ebro River Basin shows that IE is low (average IE)(avg)(= 53%) in surface-irrigated areas with high-permeable and shallow soils inadequate for this irrigation system, high (IE)(avg)(= 79%) in surface-irrigated areas with appropriate soils for this system, and very high (IE)(avg)(= 94%) in modern, automated and well managed sprinkler-irrigated areas. The unitary salt (total dissolved solids) and nitrate loads exported in the irrigation return flows (IRF) of seven districts vary, depending on soil salinity and on irrigation and N fertilization management, between 3-16 Mg salt/ha x year and 23-195 kg NO)(3) (-)-N/ha x year, respectively. The lower nitrate loads exported from high IE districts show that a proper irrigation design and management is a key factor to reduce off-site nitrogen pollution. Although high IE's also reduce off-site salt pollution, the presence of salts in the soil or subsoil may induce relatively high salt loads (>or=14 Mg/ha x year) even in high IE districts. Two important constrains identified in our revision were the short duration of most surveys and the lack of standards for conducting irrigation efficiency and mass balance studies at the irrigation district level. These limitations {emphasize the need for the establishment of a permanent and standardized network of drainage monitoring stations for the appropriate off-site pollution diagnosis and control of irrigated agriculture.

Maintaining Balance: The Increasing Role of Energy Storage for Renewable Integration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stenclik, Derek; Denholm, Paul; Chalamala, Babu

For nearly a century, global power systems have focused on three key functions: to generate, transmit, and distribute electricity as a real-time commodity. Physics requires that electricity generation always be in real-time balance with load, despite variability in load on timescales ranging from sub-second disturbances to multi-year trends. With the increasing role of variable generation from wind and solar, retirements of fossil fuel-based generation, and a changing consumer demand profile, grid operators are using new methods to maintain this balance.

Maintaining Balance: The Increasing Role of Energy Storage for Renewable Integration

DOE PAGES

Stenclik, Derek; Denholm, Paul; Chalamala, Babu

2017-10-17

For nearly a century, global power systems have focused on three key functions: to generate, transmit, and distribute electricity as a real-time commodity. Physics requires that electricity generation always be in real-time balance with load, despite variability in load on timescales ranging from sub-second disturbances to multi-year trends. With the increasing role of variable generation from wind and solar, retirements of fossil fuel-based generation, and a changing consumer demand profile, grid operators are using new methods to maintain this balance.

Static Buckling Model Tests and Elasto-plastic Finite Element Analysis of a Pile in Layers with Various Thicknesses

NASA Astrophysics Data System (ADS)

Okajima, Kenji; Imai, Junichi; Tanaka, Tadatsugu; Iida, Toshiaki

Damage to piles in the liquefied ground is frequently reported. Buckling by the excess vertical load could be one of the causes of the pile damage, as well as the lateral flow of the ground and the lateral load at the pile head. The buckling mechanism is described as a complicated interaction between the pile deformation by the vertical load and the earth pressure change cased by the pile deformation. In this study, series of static buckling model tests of a pile were carried out in dried sand ground with various thickness of the layer. Finite element analysis was applied to the test results to verify the effectiveness of the elasto-plastic finite element analysis combining the implicit-explicit mixed type dynamic relaxation method with the return mapping method to the pile buckling problems. The test results and the analysis indicated the possibility that the buckling load of a pile decreases greatly where the thickness of the layer increases.

A piloted simulation investigation of the normal load factor and longitudinal thrust required for air-to-air acquisition and tracking

NASA Technical Reports Server (NTRS)

Whalley, Matthew S.

1993-01-01

A piloted simulation study was performed by the U.S. Army Aeroflighydynamics Directorate to develop insight into the maneuverability requirements for aggressive helicopter maneuvering tasks such as air-to-air combat. Both a conventional helicopter and a helicopter with auxiliary thrust were examined. The aircraft parameters of interest were the normal and longitudinal load factor envelopes. Of particular interest were the mission performance and handling qualities tradeoffs with the parameters of interest. Two air-to-air acquisition and tracking tasks and a return-to-cover task were performed to assess mission performance. Results indicate that without auxiliary thrust, the ownship normal load factor capability needs to match that of the adversary in order to provide satisfactory handling qualities. Auxiliary thrust provides significant handling qualities advantages and can be substituted to some extent for normal load factor capability. Auxiliary thrust levels as low as 0.2 thrust/weight can provide significant handling qualities advantages.

Innovations and pitfalls in the use of wearable devices in the prevention and rehabilitation of running related injuries.

PubMed

Willy, Richard W

2018-01-01

Running-related injuries are common and are associated with a high rate of reoccurrence. Biomechanics and errors in applied training loads are often cited as causes of running-related injuries. Clinicians and runners are beginning to utilize wearable technologies to quantify biomechanics and training loads with the hope of reducing the incidence of running-related injuries. Wearable devices can objectively assess biomechanics and training loads in runners, yet guidelines for their use by clinicians and runners are not currently available. This article outlines several applications for the use of wearable devices in the prevention and rehabilitation of running-related injuries. Applications for monitoring of training loads, running biomechanics, running epidemiology, return to running programs and gait retraining are discussed. Best-practices for choosing and use of wearables are described to provide guidelines for clinicians and runners. Finally, future applications are outlined for this rapidly developing field. Copyright © 2017 Elsevier Ltd. All rights reserved.

Increasing the marketability and recognition of provider network joint ventures.

PubMed

Sjobeck, S J

1998-08-01

Physicians have been developing provider network joint ventures to market their services jointly to managed care plans, employers, and other purchasers. Over the past few years, external market factors have produced a growing impact on these joint ventures. These external market factors include the Federal government's revised antitrust guidelines, National Committee for Quality Assurance activities, and state and Federal consumer protection laws. Simply responding to these forces may not increase a provider network's marketability unless the network can demonstrate its value in the terms and measurements accepted by the consumer, managed care plans, and provider networks. By doing so, a provider network can not only increase its marketability, but also increase its recognition in the market, improve its competitive advantage, and enhance its return on investment.

Spatial competition and price formation

NASA Astrophysics Data System (ADS)

Nagel, Kai; Shubik, Martin; Paczuski, Maya; Bak, Per

2000-12-01

We look at price formation in a retail setting, that is, companies set prices, and consumers either accept prices or go someplace else. In contrast to most other models in this context, we use a two-dimensional spatial structure for information transmission, that is, consumers can only learn from nearest neighbors. Many aspects of this can be understood in terms of generalized evolutionary dynamics. In consequence, we first look at spatial competition and cluster formation without price. This leads to establishement size distributions, which we compare to reality. After some theoretical considerations, which at least heuristically explain our simulation results, we finally return to price formation, where we demonstrate that our simple model with nearly no organized planning or rationality on the part of any of the agents indeed leads to an economically plausible price.

Microbial Source Module (MSM): Documenting the Science and Software for Discovery, Evaluation, and Integration

EPA Science Inventory

The Microbial Source Module (MSM) estimates microbial loading rates to land surfaces from non-point sources, and to streams from point sources for each subwatershed within a watershed. A subwatershed, the smallest modeling unit, represents the common basis for information consume...

16 CFR 1509.5 - Component-spacing test apparatus.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Component-spacing test apparatus. 1509.5 Section 1509.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR NON-FULL-SIZE BABY CRIBS § 1509.5 Component-spacing test apparatus. (a) Loading...

16 CFR 1509.5 - Component-spacing test apparatus.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Component-spacing test apparatus. 1509.5 Section 1509.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR NON-FULL-SIZE BABY CRIBS § 1509.5 Component-spacing test apparatus. (a) Loading...

Aerothermodynamic Environment Definition for the Genesis Sample Return Capsule

NASA Technical Reports Server (NTRS)

Cheatwood, F. McNeil; Merski, N. Ronald, Jr.; Riley, Christopher J.; Mitcheltree, Robert A.

2001-01-01

NASA's Genesis sample return mission will be the first to return material from beyond the Earth-Moon system. NASA Langley Research Center supported this mission with aerothermodynamic analyses of the sample return capsule. This paper provides an overview of that effort. The capsule is attached through its forebody to the spacecraft bus. When the attachment is severed prior to Earth entry, forebody cavities remain. The presence of these cavities could dramatically increase the heating environment in their vicinity and downstream. A combination of computational fluid dynamics calculations and wind tunnel phosphor thermography tests were employed to address this issue. These results quantify the heating environment in and around the cavities, and were a factor in the decision to switch forebody heat shield materials. A transition map is developed which predicts that the flow aft of the penetrations will still be laminar at the peak heating point of the trajectory. As the vehicle continues along the trajectory to the peak dynamic pressure point, fully turbulent flow aft of the penetrations could occur. The integrated heat load calculations show that a heat shield sized to the stagnation point levels will be adequate for the predicted environment aft of the penetrations.

Remotely sensed measurements of forest structure and fuel loads in the Pinelands of New Jersey

Treesearch

Nicholas Skowronski; Kenneth Clark; Ross Nelson; John Hom; Matt Patterson

2007-01-01

We used a single-beam, first return profiling LIDAR (Light Detection and Ranging) measurements of canopy height, intensive biometric measurements in plots, and Forest Inventory and Analysis (FIA) data to quantify forest structure and ladder fuels (defined as vertical fuel continuity between the understory and canopy) in the New Jersey Pinelands. The LIDAR data were...

Biochemical Assessment of Stress in Cardiac Tissue in Response to Weightless Space Travel

NASA Technical Reports Server (NTRS)

Brunton, Laurence L.; Meszaros, J. Gary; Lio, Francisco M.

1997-01-01

The absence of unit gravity may cause physiological changes in the cardiovascular system. For instance, in the absence of Earth's gravity, venous return to the heart may increase due, in pan, to decreased pooling of the blood in the extremities. We hypothesize that this would produce an increase in the heart's work load ultimately resulting in hypertrophy.

Flaw Growth in Complex Structure. Volume 1. Technical Discussion

DTIC Science & Technology

1977-12-01

I, " RESIDUAL STRENGTH LOAD REQUIREMENT PXX LT PXX DM Pxx ESV PXX PWV PXX G([E "XX IfI FOR SAID PERIOD I I I STRUCTURE COMPLEES IN SERVICE DFPOT OX...INSPECTABILITY T THROUGH PERIOD XTX FE In-Flight Evident Return to Base PFE 2GE Ground Evident 1 Flight P GE 2WV Walkaround 50 Flights PWV SV Special

Orion URT EFT-1 load capsule onto ship

NASA Image and Video Library

2014-02-15

SAN DIEGO, Calif. – The Orion boilerplate test vehicle arrived at the U.S. Naval Base San Diego in California, and is loaded aboard the USS San Diego. Orion was transported in the ship’s well deck about 100 miles offshore for an underway recovery test. NASA and the U.S. Navy are conducting tests to prepare for recovery of the Orion crew module, forward bay cover and parachutes on its return from a deep space mission. The underway recovery test will allow the teams to demonstrate and evaluate the recovery processes, procedures, hardware and personnel in open waters. The Ground Systems Development and Operations Program Orion is the exploration spacecraft designed to carry astronauts to destinations not yet explored by humans, including an asteroid and Mars. It will have emergency abort capability, sustain the crew during space travel and provide safe re-entry from deep space return velocities. The first unpiloted test flight of the Orion is scheduled to launch in 2014 atop a Delta IV rocket and in 2017 on NASA’s Space Launch System rocket. For more information, visit http://www.nasa.gov/orion. Photo credit: NASA/Cory Huston

Orion URT EFT-1 load capsule onto ship

NASA Image and Video Library

2014-02-15

SAN DIEGO, Calif. – The Orion boilerplate test vehicle arrived at the U.S. Naval Base San Diego in California, and was loaded aboard the USS San Diego. Orion was transported in the ship’s well deck about 100 miles offshore for an underway recovery test. NASA and the U.S. Navy are conducting tests to prepare for recovery of the Orion crew module, forward bay cover and parachutes on its return from a deep space mission. The underway recovery test will allow the teams to demonstrate and evaluate the recovery processes, procedures, hardware and personnel in open waters. The Ground Systems Development and Operations Program Orion is the exploration spacecraft designed to carry astronauts to destinations not yet explored by humans, including an asteroid and Mars. It will have emergency abort capability, sustain the crew during space travel and provide safe re-entry from deep space return velocities. The first unpiloted test flight of the Orion is scheduled to launch in 2014 atop a Delta IV rocket and in 2017 on NASA’s Space Launch System rocket. For more information, visit http://www.nasa.gov/orion. Photo credit: NASA/Cory Huston

Orion URT EFT-1 load capsule onto ship

NASA Image and Video Library

2014-02-15

SAN DIEGO, Calif. – The Orion boilerplate test vehicle arrived at the U.S. Naval Base San Diego in California, and is being loaded aboard the USS San Diego. Orion was transported in the ship’s well deck about 100 miles offshore for an underway recovery test. NASA and the U.S. Navy are conducting tests to prepare for recovery of the Orion crew module, forward bay cover and parachutes on its return from a deep space mission. The underway recovery test will allow the teams to demonstrate and evaluate the recovery processes, procedures, hardware and personnel in open waters. The Ground Systems Development and Operations Program Orion is the exploration spacecraft designed to carry astronauts to destinations not yet explored by humans, including an asteroid and Mars. It will have emergency abort capability, sustain the crew during space travel and provide safe re-entry from deep space return velocities. The first unpiloted test flight of the Orion is scheduled to launch in 2014 atop a Delta IV rocket and in 2017 on NASA’s Space Launch System rocket. For more information, visit http://www.nasa.gov/orion. Photo credit: NASA/Cory Huston

Major Quantitative Trait Loci Affecting Honey Bee Foraging Behavior

PubMed Central

Hunt, G. J.; Page-Jr., R. E.; Fondrk, M. K.; Dullum, C. J.

1995-01-01

We identified two genomic regions that affect the amount of pollen stored in honey bee colonies and influence whether foragers will collect pollen or nectar. We selected for the amount of pollen stored in combs of honey bee colonies, a colony-level trait, and then used random amplified polymorphic DNA (RAPD) markers and interval mapping procedures with data from backcross colonies to identify two quantitative trait loci (pln1 and pln2, LOD 3.1 and 2.3, respectively). Quantitative trait loci effects were confirmed in a separate cross by demonstrating the cosegregation of marker alleles with the foraging behavior of individual workers. Both pln1 and pln2 had an effect on the amount of pollen carried by foragers returning to the colony, as inferred by the association between linked RAPD marker alleles, D8-.3f and 301-.55, and the individual pollen load weights of returning foragers. The alleles of the two marker loci were nonrandomly distributed with respect to foraging task. The two loci appeared to have different effects on foraging behavior. Individuals with alternative alleles for the marker linked to pln2 (but not pln1) differed with respect to the nectar sugar concentration of their nectar loads. PMID:8601492

Acute Stress and Perceptual Load Consume the Same Attentional Resources: A Behavioral-ERP Study

PubMed Central

Tiferet-Dweck, Chen; Hensel, Michael; Kirschbaum, Clemens; Tzelgov, Joseph; Friedman, Alon; Salti, Moti

2016-01-01

Stress and perceptual load affect selective attention in a paradoxical manner. They can facilitate selectivity or disrupt it. This EEG study was designed to examine the reciprocal relations between stress, load and attention. Two groups of subjects, one that performed the Trier Social Stress Test (TSST), and a control group, were asked to respond to a target letter under low and high perceptual load in the absence or presence of a distractor. In the control group, the distractor increased response times (RTs) for high and low load. In the TSST group, distractor increased RTs under low load only. ERPs showed that distractor’s presentation attenuated early visual P1 component and shortened its latency. In the TSST group, distractor reduced P1 component under high load but did not affect its latency. Source localization demonstrated reduced activation in V1 in response to distractors presence in the P1 time window for the TSST group compared to the control group. A behavioral replication revealed that in the TSST group distractors were less perceived under high load. Taken together, our results show that stress and perceptual load affect selectivity through the early stages of visual processing and might increase selectivity in a manner that would block conscious perception of irrelevant stimuli. PMID:27196027

Exposure, health information and flavour-masking strategies for improving the sensory quality of probiotic juice.

PubMed

Luckow, T; Sheehan, V; Fitzgerald, G; Delahunty, C

2006-11-01

Probiotics are live microbial food supplements, which have been shown to exert numerous health benefits. Research has identified that probiotics cause perceptible off-flavours that often contribute to consumer dissatisfaction. This research consisted of three objectives. Firstly, to confirm whether probiotics have a significant effect on the sensory quality and the consumer acceptance of juices. Secondly, to evaluate whether the addition of tropical juices masks probiotic off-flavours, thereby increasing consumer liking. Thirdly, to determine whether non-sensory factors (i.e., repeated exposure, and health information) have an impact on consumer liking. Three orange juice products were manufactured for analysis; Control juice, juice containing probiotics, and juice containing probiotics and tropical fruit juices (10% v/v). Descriptive sensory analysis using a trained panel (n=8) determined that probiotic juices possessed unique 'medicinal' characteristics. Using labelled affective magnitude scales, consumers (n=116) evaluated their 'overall liking' of the three juices in a randomised order in the laboratory. Once assigned into one of three balanced exposure groups, each consumer took home seven, 100mL bottles of one of the juices, and consumed one bottle each day for 7 days. After each in-home consumption, consumers evaluated their 'overall liking' to familiarize themselves with the juice. Furthermore, half of the consumers were provided with information about the presence and the health benefits of probiotics, while the other half of consumers received no information. After 7 days of in-home usage, consumers returned to the laboratory for post-exposure sensory testing, where they re-evaluated their 'overall liking' of the three juices in a randomised order. Results showed that tropical juices were effective in masking the off-flavours associated with probiotic ingredients, and that consumer liking for the probiotic juice containing tropical juice flavours was maintained over the 7-day exposure period. Exposure and information had significant effects on the 'overall liking' of juices containing probiotic cultures. A significant interaction between exposure and information was observed. Therefore, exposure, health information and flavour-masking techniques can have a positive effect on the hedonic qualities of probiotic juices.

Advances in Developing HIV-1 Viral Load Assays for Resource-Limited Settings

PubMed Central

Wang, ShuQi; Xu, Feng; Demirci, Utkan

2010-01-01

Commercial HIV-1 RNA viral load assays have been routinely used in developed countries to monitor antiretroviral treatment (ART). However, these assays require expensive equipment and reagents, well-trained operators, and established laboratory infrastructure. These requirements restrict their use in resource-limited settings where people are most afflicted with the HIV-1 epidemic. Inexpensive alternatives such as the Ultrasensitive p24 assay, the Reverse Transcriptase (RT) assay and in-house reverse transcription quantitative polymerase chain reaction (RT-qPCR) have been developed. However, they are still time-consuming, technologically complex and inappropriate for decentralized laboratories as point-of-care (POC) tests. Recent advances in microfluidics and nanotechnology offer new strategies to develop low-cost, rapid, robust and simple HIV-1 viral load monitoring systems. We review state-of-the-art technologies used for HIV-1 viral load monitoring in both developed and developing settings. Emerging approaches based on microfluidics and nanotechnology, which have potential to be integrated into POC HIV-1 viral load assays, are also discussed. PMID:20600784

Catalytic hydrogen sensing using microheated platinum nanoparticle-loaded graphene aerogel

DOE PAGES

Harley-Trochimczyk, Anna; Chang, Jiyoung; Zhou, Qin; ...

2014-10-02

We present that low power catalytic hydrogen sensors are fabricated by functionalizing low power polysilicon microheaters with platinum nanoparticle catalyst loaded in a high surface area graphene aerogel support. Fabrication and characterization of the polysilicon microheaters are described. The platinum nanoparticle-loaded graphene aerogel is characterized by transmission electron microscopy, scanning electron microscopy, and energy dispersive X-ray spectroscopy. Finally, the catalytic hydrogen sensors consume as little as 2.2 mW of power, have sensitivity of 1.6%/10,000 ppm hydrogen, a t90 response and recovery time of 0.97 s and 0.72 s, respectively, a lower detection limit of approximately 65 ppm, and negligible crossmore » sensitivity to methane, n-pentane, and diethylether.« less

Reliability of biologic indicators in a mail-return sterilization-monitoring service: a review of 3 years.

PubMed

Andrés, M T; Tejerina, J M; Fierro, J F

1995-12-01

Most mail-return sterilization-monitoring services use spore strips to test sterilizers in dental clinics, but factors such as delay caused by mailing to the laboratory could cause false negatives. The aims of this study were to determine the influence of poststerilization time and temperature on the biologic indicator recovery system and to evaluate sterilization failure and its possible causes in dental clinics subscribing to a mail-return sterilization-monitoring service. Spore strips used in independent tests revealed the poststerilization time and temperature after a 7-day delay to have no significant influence. Sixty-six dental clinics that received quarterly biologic indicators to evaluate the effectiveness of their sterilizers had sterilization failure rates of 28.7% in 1992, 18.1% in 1993, and 9.1% in 1994, a statistically significant decrease in sterilization failure during the 3-year period. The usual causes of failure were operator error in wrapping of instruments, loading, operating temperature, or exposure time.

Financial effects of pharmaceutical price regulation on R&D spending by EU versus US firms.

PubMed

Golec, Joseph; Vernon, John A

2010-01-01

EU countries closely regulate pharmaceutical prices, whereas the US does not. This paper shows how price constraints affect the profitability, stock returns and R&D spending of EU and US firms. Compared with EU firms, US firms are more profitable, earn higher stock returns and spend more on R&D. We tested the relationship between price regulation and R&D spending, and estimated the costs of tight EU price regulation. Although results show that EU consumers enjoyed much lower pharmaceutical price inflation, we estimated that price controls cost EU firms 46 fewer new medicines and 1680 fewer research jobs during our 19-year sample period. Had the US used controls similar to those used in the EU, we estimate it would have led to 117 fewer new medicines and 4368 fewer research jobs in the US.

Design and Implementation of Improved Electronic Load Controller for Self-Excited Induction Generator for Rural Electrification

PubMed Central

Kathirvel, C.; Porkumaran, K.; Jaganathan, S.

2015-01-01

This paper offers an alternative technique, namely, Improved Electronic Load Controller (IELC), which is proposal to improve power quality, maintaining voltage at frequency desired level for rural electrification. The design and development of IELC are considered as microhydroenergy system. The proposed work aims to concentrate on the new schemes for rural electrification with the help of different kinds of hybrid energy systems. The objective of the proposed scheme is to maintain the speed of generation against fluctuating rural demand. The Electronic Load Controller (ELC) is used to connect and disconnect the dump load during the operation of the system, and which absorbs the load when consumer are not in active will enhance the lifestyle of the rural population and improve the living standards. Hydroelectricity is a promising option for electrification of remote villages in India. The conventional methods are not suitable to act as standalone system. Hence, the designing of a proper ELC is essential. The improved electronic load control performance tested with simulation at validated through hardware setup. PMID:26783553

Design and Implementation of Improved Electronic Load Controller for Self-Excited Induction Generator for Rural Electrification.

PubMed

Kathirvel, C; Porkumaran, K; Jaganathan, S

2015-01-01

This paper offers an alternative technique, namely, Improved Electronic Load Controller (IELC), which is proposal to improve power quality, maintaining voltage at frequency desired level for rural electrification. The design and development of IELC are considered as microhydroenergy system. The proposed work aims to concentrate on the new schemes for rural electrification with the help of different kinds of hybrid energy systems. The objective of the proposed scheme is to maintain the speed of generation against fluctuating rural demand. The Electronic Load Controller (ELC) is used to connect and disconnect the dump load during the operation of the system, and which absorbs the load when consumer are not in active will enhance the lifestyle of the rural population and improve the living standards. Hydroelectricity is a promising option for electrification of remote villages in India. The conventional methods are not suitable to act as standalone system. Hence, the designing of a proper ELC is essential. The improved electronic load control performance tested with simulation at validated through hardware setup.

Evaluation of Miscellaneous and Electronic Device Energy Use in Hospitals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Black, Douglas R.; Lanzisera, Steven M.; Lai, Judy

2012-09-01

Miscellaneous and electronic loads (MELs) consume about one-thirdof the primary energy used in US buildings, and their energy use is increasing faster than other end-uses. In healthcare facilities, 30percent of the annual electricity was used by MELs in 2008. This paper presents methods and challenges for estimating medical MELs energy consumption along with estimates of energy use in a hospital by combining device-level metered data with inventories and usage information. An important finding is that common, small devices consume large amounts of energy in aggregate and should not be ignored when trying to address hospital energy use.

A Systems Approach to Stress, Stressors and Resilience in Humans

PubMed Central

Oken, Barry S.; Chamine, Irina; Wakeland, Wayne

2014-01-01

The paper focuses on the biology of stress and resilience and their biomarkers in humans from the system science perspective. A stressor pushes the physiological system away from its baseline state towards a lower utility state. The physiological system may return towards the original state in one attractor basin but may be shifted to a state in another, lower utility attractor basin. While some physiological changes induced by stressors may benefit health, there is often a chronic wear and tear cost due to implementing changes to enable the return of the system to its baseline state and maintain itself in the high utility baseline attractor basin following repeated perturbations. This cost, also called allostatic load, is the utility reduction associated with both a change in state and with alterations in the attractor basin that affect system responses following future perturbations. This added cost can increase the time course of the return to baseline or the likelihood of moving into a different attractor basin following a perturbation. Opposite to this is the system’s resilience which influences its ability to return to the high utility attractor basin following a perturbation by increasing the likelihood and/or speed of returning to the baseline state following a stressor. This review paper is a qualitative systematic review; it covers areas most relevant for moving the stress and resilience field forward from a more quantitative and neuroscientific perspective. PMID:25549855

Principle and Basic Characteristics of Variable-Magnetic-Force Memory Motors

NASA Astrophysics Data System (ADS)

Sakai, Kazuto; Yuki, Kazuaki; Hashiba, Yutaka; Takahashi, Norio; Yasui, Kazuya; Kovudhikulrungsri, Lilit

A reduction in the power consumed by motors is required for energy saving in the case of electrical appliances and electric vehicles (EV). The motors used for operating these apparatus operate at variable speeds. Further, the motors operate with small load in stationary mode and with large load in start-up mode. A permanent magnet motor can operate at the rated power with a high efficiency. However, the efficiency is lower at small load or high speed because the large constant magnetic force results in substantial core loss. Furthermore, the flux-weakening current that depresses voltage at high speed leads to significant copper loss. Therefore, we have developed a new technique for controlling the magnetic force of permanent magnet on the basis of the load or speed of the motor. In this paper, we propose the novel motor that can vary magnetic flux and we clarify the principle.

A tool for simulating parallel branch-and-bound methods

NASA Astrophysics Data System (ADS)

Golubeva, Yana; Orlov, Yury; Posypkin, Mikhail

2016-01-01

The Branch-and-Bound method is known as one of the most powerful but very resource consuming global optimization methods. Parallel and distributed computing can efficiently cope with this issue. The major difficulty in parallel B&B method is the need for dynamic load redistribution. Therefore design and study of load balancing algorithms is a separate and very important research topic. This paper presents a tool for simulating parallel Branchand-Bound method. The simulator allows one to run load balancing algorithms with various numbers of processors, sizes of the search tree, the characteristics of the supercomputer's interconnect thereby fostering deep study of load distribution strategies. The process of resolution of the optimization problem by B&B method is replaced by a stochastic branching process. Data exchanges are modeled using the concept of logical time. The user friendly graphical interface to the simulator provides efficient visualization and convenient performance analysis.

Peak load demand forecasting using two-level discrete wavelet decomposition and neural network algorithm

NASA Astrophysics Data System (ADS)

Bunnoon, Pituk; Chalermyanont, Kusumal; Limsakul, Chusak

2010-02-01

This paper proposed the discrete transform and neural network algorithms to obtain the monthly peak load demand in mid term load forecasting. The mother wavelet daubechies2 (db2) is employed to decomposed, high pass filter and low pass filter signals from the original signal before using feed forward back propagation neural network to determine the forecasting results. The historical data records in 1997-2007 of Electricity Generating Authority of Thailand (EGAT) is used as reference. In this study, historical information of peak load demand(MW), mean temperature(Tmean), consumer price index (CPI), and industrial index (economic:IDI) are used as feature inputs of the network. The experimental results show that the Mean Absolute Percentage Error (MAPE) is approximately 4.32%. This forecasting results can be used for fuel planning and unit commitment of the power system in the future.

Plug-Load Control and Behavioral Change Research in GSA Office Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Metzger, I.; Cutler, D.; Sheppy, M.

2012-10-01

The U.S. General Services Administration (GSA) owns and leases over 354 million square feet (ft2) of space in over 9,600 buildings [1]. GSA is a leader among federal agencies in aggressively pursuing energy efficiency (EE) opportunities for its facilities and installing renewable energy (RE) systems to provide heating, cooling, and power to these facilities. According to several energy assessments of GSA's buildings conducted by the National Renewable Energy Laboratory (NREL), plug-loads account for approximately 21% of the total electricity consumed within a standard GSA Region 3 office building. This study aims to provide insight on how to effectively manage plug-loadmore » energy consumption and attain higher energy and cost savings for plug-loads. As GSA improves the efficiency of its building stock, plug-loads will become an even greater portion of its energy footprint.« less

US Army Medical Bioengineering Research and Development Laboratory Annual Progress Report for FY 83.

DTIC Science & Technology

1983-10-01

Army consumes is chlorinated. Also, the water from Army wastewater treatment plants is chlorinated before it is returned to the environment.I Because...12K; CY - K; BY - OK PROBLEM DEFINITION: Chlorination of drinking water and of effluents from wastewater treatment plants is standard practice employed...FY81 indicated no research - activity on this type of photocell. Materials and chemicals have been ordered and assembled. A preliminary cell has been

The Consequences of Interdependence: A Policy Point of View

DTIC Science & Technology

1975-10-01

surplunos to world food shortages of serious proportions, This occured at a time when the US and most of the world faeed a most serious influtionary...Amer:ican taxpayer and consumer and to the efficiency of the American producer; in the US the practice has proliferated seriously into acts of states...bill (S. 613) designed to reduce litter (and to save enercy) by pro- . hibitinG the introduction into interstate commerce of non-returnable beverage

Translations on USSR Military Affairs No. 1266

DTIC Science & Technology

1977-03-03

At present it is impossible to ascertain on precisely what day the group of soldiers was sent during training time to a nearby winery . But soon the...district. And the subunit began to receive telephone calls and visits from the repre- sentatives of the winery , consumer goods factories and other...group of 10-12 persons headed by a warrant officer left for the winery or. another enterprise instead of going to exercises. And they returned to the

Range Commanders Council Meteorology Group 88th Meeting: NASA Marshall Space Flight Center Task Report, 2004

NASA Technical Reports Server (NTRS)

Roberts, Barry C.

2004-01-01

Supported Return-to-Flight activities by providing surface climate data from Kennedy Space Center used primarily for ice and dew formation studies, and upper air wind analysis primarily used for ascent loads analyses. The MSFC Environments Group's Terrestrial and Planetary Environments Team documented Space Shuttle day-of-launch support activities by publishing a document in support of SSP Return-to-Flight activities entitled "Space Shuttle Program Flight Operations Support". The team also formalized the Shuttle Natural Environments Technical Panel and chaired the first special session of the SSP Natural Environments Panel meeting at KSC, November 4-7,2003.58 participants from NASA, DOD and other government agencies from across the country attended the meeting.

Soyuz 23 Return Samples: Assessment of Air Quality Aboard the International Space Station

NASA Technical Reports Server (NTRS)

James, John T.

2011-01-01

Six mini-grab sample containers (m-GSCs) were returned aboard Soyuz 23 because of concerns that new air pollutants had been present in the air and these were getting into the water recovery system. The Total Organic Carbon Analyzer had been giving increasing readings of total organic carbon (TOC) in the potable water, and it was postulated that an increased load into the system was responsible. The TOC began to decline in late October, 2010. The toxicological assessment of 6 m-GSCs from the ISS is shown in Table 1. The recoveries of 13C-acetone, fluorobenzene, and chlorobenzene from the GSCs averaged 73, 82, and 59%, respectively. We are working to understand the sub-optimal recovery of chlorobenzene.

Unsteady flow phenomena in industrial centrifugal compressor stage

NASA Technical Reports Server (NTRS)

Bonciani, L.; Terrinoni, L.; Tesei, A.

1982-01-01

The results of an experimental investigation on a typical centrifugal compressor stage running on an atmospheric pressure test rig are shown. Unsteady flow was invariably observed at low flow well before surge. In order to determine the influence of the statoric components, the same impeller was repeatedly tested with the same vaneless diffuser, but varying return channel geometry. Experimental results show the strong effect exerted by the return channel, both on onset and on the behavior of unsteady flow. Observed phenomena have been found to confirm well the observed dynamic behavior of full load tested machines when gas density is high enough to cause appreciable mechanical vibrations. Therefore, testing of single stages at atmospheric pressure may provide a fairly accurate prediction of this kind of aerodynamic excitation.

Apparatus for sequentially transporting containers

NASA Technical Reports Server (NTRS)

Hudgins, J. L. (Inventor)

1982-01-01

Apparatus for transferring and manipulating a plurality of containers in a sequence is disclosed including a mechanical manipulator arm having a gripping device which automatically picks up a container at a fixed pickup position P and transfers it to a processing station. At a processing station X, the container is loaded with silicon wafers and thereafter returned by the arm to the fixed position P at the pickup and return station Y. A plurality of the containers may be processed in sequence from the fixed pickup position by providing a movable carriage upon which container pedestal platforms are supported, at least one of which is an elevator platform. The platforms include abutments for properly positioning the containers for accurate pickup by the manipulator arm.

EPAct 2005: A Roadmap for Open Access

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morrison, Jay A.

After nine years of negotiation characterized by significant philosophical swings, Congress came together in the middle to support a moderate vision of open access intended primarily to enable load-serving entities to obtain the transmission service they need to meet the long-term needs of their consumers reliably and economically.

40 CFR 86.314-79 - Fuel flow measurement specifications.

Code of Federal Regulations, 2010 CFR

2010-07-01

... percent of the measuring weight. (3) If the mass of fuel consumed is measured electronically (load cell... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Fuel flow measurement specifications....314-79 Fuel flow measurement specifications. (a) The fuel flow rate measurement instrument must have a...

40 CFR 86.314-79 - Fuel flow measurement specifications.

Code of Federal Regulations, 2013 CFR

2013-07-01

... percent of the measuring weight. (3) If the mass of fuel consumed is measured electronically (load cell... 40 Protection of Environment 19 2013-07-01 2013-07-01 false Fuel flow measurement specifications....314-79 Fuel flow measurement specifications. (a) The fuel flow rate measurement instrument must have a...

40 CFR 86.314-79 - Fuel flow measurement specifications.

Code of Federal Regulations, 2012 CFR

2012-07-01

... percent of the measuring weight. (3) If the mass of fuel consumed is measured electronically (load cell... 40 Protection of Environment 19 2012-07-01 2012-07-01 false Fuel flow measurement specifications....314-79 Fuel flow measurement specifications. (a) The fuel flow rate measurement instrument must have a...

40 CFR 86.314-79 - Fuel flow measurement specifications.

Code of Federal Regulations, 2011 CFR

2011-07-01

... percent of the measuring weight. (3) If the mass of fuel consumed is measured electronically (load cell... 40 Protection of Environment 18 2011-07-01 2011-07-01 false Fuel flow measurement specifications....314-79 Fuel flow measurement specifications. (a) The fuel flow rate measurement instrument must have a...

The Impact of Persistent Pain on Working Memory and Learning

ERIC Educational Resources Information Center

Smith, Alexander; Ayres, Paul

2014-01-01

The study reviewed the evidence that persistent pain has the capacity to interrupt and consume working memory resources. It was argued that individuals with persistent pain essentially operate within a compromised neurocognitive paradigm of limited working memory resources that impairs task performance. Using cognitive load theory as a theoretical…

Influence of catchment land cover on stoichiometry and stable isotope compositions of basal resources and macroinvertebrate consumers in headwater streams

EPA Science Inventory

Anthropogenic land use affects aquatic landscapes. For example, landscape-level conversion to urban or agricultural land can heavily influence nutrient cycles in headwater streams via increased nutrient loading and altered hydrologic patterns. Recent studies in headwater streams ...

Critical Branches and Lucky Loads in Control-Independence Architectures

ERIC Educational Resources Information Center

Malik, Kshitiz

2009-01-01

Branch mispredicts have a first-order impact on the performance of integer applications. Control Independence (CI) architectures aim to overlap the penalties of mispredicted branches with useful execution by spawning control-independent work as separate threads. Although control independent, such threads may consume register and memory values…

Vulnerability to predation and physiological stress responses of experimentally descaled juvenile Chinook salmon, Oncorhynchus tshawytscha

USGS Publications Warehouse

Gadomski, Dena M.; Mesa, Matthew G.; Olson, Todd M.

1994-01-01

Juvenile salmonids,Oncorhynchus spp., commonly encounter conditions (e.g., during hatchery release and dam passage) that result in damage to the skin, scale, and slime complex. We conducted laboratory experiments to determine if descaling of juvenile chinook salmon,O. tshawytscha, increased their vulnerability to predation, and to assess the physiological stress responses elicited by descaling. Salmon were experimentally descaled on either 10% or 20% of their total body area. When offered equal numbers of control and descaled juvenile chinook salmon, northern squawfish,Ptychocheilus oregonensis, did not consume significantly more of either prey type (48–60% of consumed prey were descaled). Juvenile chinook salmon descaled on 10% of their body area did show significant physiological stress responses, however. Mean concentrations of plasma cortisol peaked 1 h after descaling, and returned to control levels by 12 h. Plasma glucose peaked 3 h post-treatment and remained elevated for 24 h. Plasma lactate increased immediately following treatment and returned to undisturbed control levels by 3 h. The osmoregulatory response of plasma potassium was highly variable, but plasma sodium decreased immediately and remained low for 24 h. The observed physiological responses suggest that descaling of juvenile chinook salmon could result in decreased resistance to disease and other stressors encountered in the field, possibly leading to reduced performance capacity and lowered survival.

Termites utilise clay to build structural supports and so increase foraging resources

PubMed Central

Oberst, Sebastian; Lai, Joseph C. S.; Evans, Theodore A.

2016-01-01

Many termite species use clay to build foraging galleries and mound-nests. In some cases clay is placed within excavations of their wooden food, such as living trees or timber in buildings; however the purpose for this clay is unclear. We tested the hypotheses that termites can identify load bearing wood, and that they use clay to provide mechanical support of the load and thus allow them to eat the wood. In field and laboratory experiments, we show that the lower termite Coptotermes acinaciformis, the most basal species to build a mound-nest, can distinguish unloaded from loaded wood, and use clay differently when eating each type. The termites target unloaded wood preferentially, and use thin clay sheeting to camouflage themselves while eating the unloaded wood. The termites attack loaded wood secondarily, and build thick, load-bearing clay walls when they do. The termites add clay and build thicker walls as the load-bearing wood is consumed. The use of clay to support wood under load unlocks otherwise unavailable food resources. This behaviour may represent an evolutionary step from foraging behaviour to nest building in lower termites. PMID:26854187

Message passing for integrating and assessing renewable generation in a redundant power grid

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zdeborova, Lenka; Backhaus, Scott; Chertkov, Michael

2009-01-01

A simplified model of a redundant power grid is used to study integration of fluctuating renewable generation. The grid consists of large number of generator and consumer nodes. The net power consumption is determined by the difference between the gross consumption and the level of renewable generation. The gross consumption is drawn from a narrow distribution representing the predictability of aggregated loads, and we consider two different distributions representing wind and solar resources. Each generator is connected to D consumers, and redundancy is built in by connecting R {le} D of these consumers to other generators. The lines are switchablemore » so that at any instance each consumer is connected to a single generator. We explore the capacity of the renewable generation by determining the level of 'firm' generation capacity that can be displaced for different levels of redundancy R. We also develop message-passing control algorithm for finding switch sellings where no generator is overloaded.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lampert, David J.; Cai, Hao; Wang, Zhichao

The production of all forms of energy consumes water. To meet increased energy demands, it is essential to quantify the amount of water consumed in the production of different forms of energy. By analyzing the water consumed in different technologies, it is possible to identify areas for improvement in water conservation and reduce water stress in energy-producing regions. The transportation sector is a major consumer of energy in the United States. Because of the relationships between water and energy, the sustainability of transportation is tied to management of water resources. Assessment of water consumption throughout the life cycle of amore » fuel is necessary to understand its water resource implications. To perform a comparative life cycle assessment of transportation fuels, it is necessary first to develop an inventory of the water consumed in each process in each production supply chain. The Greenhouse Gases, Regulated Emissions, and Energy Use in Transportation (GREET) model is an analytical tool that can used to estimate the full life-cycle environmental impacts of various transportation fuel pathways from wells to wheels. GREET is currently being expanded to include water consumption as a sustainability metric. The purpose of this report was to document data sources and methodologies to estimate water consumption factors (WCF) for the various transportation fuel pathways in GREET. WCFs reflect the quantity of freshwater directly consumed per unit production for various production processes in GREET. These factors do not include consumption of precipitation or low-quality water (e.g., seawater) and reflect only water that is consumed (i.e., not returned to the source from which it was withdrawn). The data in the report can be combined with GREET to compare the life cycle water consumption for different transportation fuels.« less

Context-dependency in the effects of nutrient loading and consumers on the availability of space in marine rocky environments.

PubMed

Bulleri, Fabio; Russell, Bayden D; Connell, Sean D

2012-01-01

Enhanced nutrient loading and depletion of consumer populations interact to alter the structure of aquatic plant communities. Nonetheless, variation between adjacent habitats in the relative strength of bottom-up (i.e. nutrients) versus top-down (i.e. grazing) forces as determinants of community structure across broad spatial scales remains unexplored. We experimentally assessed the importance of grazing pressure and nutrient availability on the development of macroalgal assemblages and the maintenance of unoccupied space in habitats differing in physical conditions (i.e. intertidal versus subtidal), across regions of contrasting productivity (oligotrophic coasts of South Australia versus the more productive coasts of Eastern Australia). In Eastern Australia, grazers were effective in maintaining space free of macroalgae in both intertidal and subtidal habitats, irrespective of nutrient levels. Conversely, in South Australia, grazers could not prevent colonization of space by turf-forming macroalgae in subtidal habitats regardless of nutrients levels, yet in intertidal habitats removal of grazers reduced unoccupied space when nutrients were elevated. Assessing the effects of eutrophication in coastal waters requires balancing our understanding between local consumer pressure and background oceanographic conditions that affect productivity. This broader-based understanding may assist in reconciling disproportionately large local-scale variation, a characteristic of ecology, with regional scale processes that are often of greater relevance to policy making and tractability to management.

The effect of switchgrass loadings on feedstock solubilization and biofuel production by Clostridium thermocellum

DOE Office of Scientific and Technical Information (OSTI.GOV)

Verbeke, Tobin J.; Garcia, Gabriela M.; Elkins, James G.

High solids loading fermentations are necessary for the industrialization of lignocellulosic ethanol. To date, only a few studies have investigated the effect of solids loadings on microorganisms of interest for consolidated bioprocessing (CBP). Here, the effect that various switchgrass loadings have on Clostridium thermocellum solubilization and bioconversion are investigated. C. thermocellum was grown for ten days on 10, 25 or 50 g/L switchgrass or Avicel at equivalent glucan loadings. Avicel was completely consumed at all loadings, but total cellulose solubilization decreased from 63% to 37% as switchgrass loadings increased from 10 g/L to 50 g/L. Washed, spent switchgrass could bemore » additionally hydrolyzed and fermented in second-round fermentations suggesting access to fermentable substrates was not the limiting factor at higher feedstock loadings. Fermentations of Avicel or cellobiose using culture medium supplemented with 50% spent fermentation broth identified that compounds present in the samples collected from the 25 or 50 g/L switchgrass loadings were the most inhibitory to continued fermentation. Finally, recalcitrance alone cannot fully account for differences in solubilization and end-production formation between switchgrass and Avicel at increased substrate loadings. Effort to decouple metabolic inhibition from inhibition of hydrolysis suggest that C. thermocellum’s hydrolytic machinery is more vulnerable to inhibition from switchgrass-derived inhibitors than is the bacterium’s metabolism.« less

The effect of switchgrass loadings on feedstock solubilization and biofuel production by Clostridium thermocellum

DOE PAGES

Verbeke, Tobin J.; Garcia, Gabriela M.; Elkins, James G.

2017-11-30

High solids loading fermentations are necessary for the industrialization of lignocellulosic ethanol. To date, only a few studies have investigated the effect of solids loadings on microorganisms of interest for consolidated bioprocessing (CBP). Here, the effect that various switchgrass loadings have on Clostridium thermocellum solubilization and bioconversion are investigated. C. thermocellum was grown for ten days on 10, 25 or 50 g/L switchgrass or Avicel at equivalent glucan loadings. Avicel was completely consumed at all loadings, but total cellulose solubilization decreased from 63% to 37% as switchgrass loadings increased from 10 g/L to 50 g/L. Washed, spent switchgrass could bemore » additionally hydrolyzed and fermented in second-round fermentations suggesting access to fermentable substrates was not the limiting factor at higher feedstock loadings. Fermentations of Avicel or cellobiose using culture medium supplemented with 50% spent fermentation broth identified that compounds present in the samples collected from the 25 or 50 g/L switchgrass loadings were the most inhibitory to continued fermentation. Finally, recalcitrance alone cannot fully account for differences in solubilization and end-production formation between switchgrass and Avicel at increased substrate loadings. Effort to decouple metabolic inhibition from inhibition of hydrolysis suggest that C. thermocellum’s hydrolytic machinery is more vulnerable to inhibition from switchgrass-derived inhibitors than is the bacterium’s metabolism.« less

A distributed algorithm for demand-side management: Selling back to the grid.

PubMed

Latifi, Milad; Khalili, Azam; Rastegarnia, Amir; Zandi, Sajad; Bazzi, Wael M

2017-11-01

Demand side energy consumption scheduling is a well-known issue in the smart grid research area. However, there is lack of a comprehensive method to manage the demand side and consumer behavior in order to obtain an optimum solution. The method needs to address several aspects, including the scale-free requirement and distributed nature of the problem, consideration of renewable resources, allowing consumers to sell electricity back to the main grid, and adaptivity to a local change in the solution point. In addition, the model should allow compensation to consumers and ensurance of certain satisfaction levels. To tackle these issues, this paper proposes a novel autonomous demand side management technique which minimizes consumer utility costs and maximizes consumer comfort levels in a fully distributed manner. The technique uses a new logarithmic cost function and allows consumers to sell excess electricity (e.g. from renewable resources) back to the grid in order to reduce their electric utility bill. To develop the proposed scheme, we first formulate the problem as a constrained convex minimization problem. Then, it is converted to an unconstrained version using the segmentation-based penalty method. At each consumer location, we deploy an adaptive diffusion approach to obtain the solution in a distributed fashion. The use of adaptive diffusion makes it possible for consumers to find the optimum energy consumption schedule with a small number of information exchanges. Moreover, the proposed method is able to track drifts resulting from changes in the price parameters and consumer preferences. Simulations and numerical results show that our framework can reduce the total load demand peaks, lower the consumer utility bill, and improve the consumer comfort level.

Shunt regulation electric power system

NASA Technical Reports Server (NTRS)

Wright, W. H.; Bless, J. J. (Inventor)

1971-01-01

A regulated electric power system having load and return bus lines is described. A plurality of solar cells interconnected in a power supplying relationship and having a power shunt tap point electrically spaced from the bus lines is provided. A power dissipator is connected to the shunt tap point and provides for a controllable dissipation of excess energy supplied by the solar cells. A dissipation driver is coupled to the power dissipator and controls its conductance and dissipation and is also connected to the solar cells in a power taping relationship to derive operating power therefrom. An error signal generator is coupled to the load bus and to a reference signal generator to provide an error output signal which is representative of the difference between the electric parameters existing at the load bus and the reference signal generator. An error amplifier is coupled to the error signal generator and the dissipation driver to provide the driver with controlling signals.

Response spectrum method for extreme wave loading with higher order components of drag force

NASA Astrophysics Data System (ADS)

Reza, Tabeshpour Mohammad; Mani, Fatemi Dezfouli; Ali, Dastan Diznab Mohammad; Saied, Mohajernasab; Saied, Seif Mohammad

2017-03-01

Response spectra of fixed offshore structures impacted by extreme waves are investigated based on the higher order components of the nonlinear drag force. In this way, steel jacket platforms are simplified as a mass attached to a light cantilever cylinder and their corresponding deformation response spectra are estimated by utilizing a generalized single degree of freedom system. Based on the wave data recorded in the Persian Gulf region, extreme wave loading conditions corresponding to different return periods are exerted on the offshore structures. Accordingly, the effect of the higher order components of the drag force is considered and compared to the linearized state for different sea surface levels. When the fundamental period of the offshore structure is about one third of the main period of wave loading, the results indicate the linearized drag term is not capable of achieving a reliable deformation response spectrum.

Spacecraft solid state power distribution switch

NASA Technical Reports Server (NTRS)

Praver, G. A.; Theisinger, P. C.

1986-01-01

As a spacecraft performs its mission, various loads are connected to the spacecraft power bus in response to commands from an on board computer, a function called power distribution. For the Mariner Mark II set of planetary missions, the power bus is 30 volts dc and when loads are connected or disconnected, both the bus and power return side must be switched. In addition, the power distribution function must be immune to single point failures and, when power is first applied, all switches must be in a known state. Traditionally, these requirements have been met by electromechanical latching relays. This paper describes a solid state switch which not only satisfies the requirements but incorporates several additional features including soft turn on, programmable current trip point with noise immunity, instantaneous current limiting, and direct telemetry of load currents and switch status. A breadboard of the design has been constructed and some initial test results are included.

An economic interpretation of the distribution and organization of abortion services.

PubMed

Kay, B J; Whitted, N A; Hardin, S S

1981-01-01

Compared with other medical services, elective abortion is a special case where economic factors affecting delivery remain essentially constant. The consumer purchases it infrequently and the provider provides relatively frequently; the patient is not seeking information or interpretation of symptoms, only therapeutic service for which the technique is almost universal. In this area of medicine the consumer assesses the symptoms and decides on treatment before selecting a provider. U.S. women are not using abortion as a means of contraception in general and if they do, it is only once or twice. Prices charged for 1st trimester abortions are relatively stable ($171 in 1978, $174 in 1980). Since the liberalization of abortion legislation in 1973 there has been a yearly increase in elective 1st trimester abortions (85%), but a decreasing rate for each subsequent year (21% for 1973-74, 4% for 1977-78). Unmet need decreased from 58% in 1973 to 26% in 1978, concentrated in rural areas. The supply of abortions is subjected to constraints such as the aura of illegality, negative professional peer pressure, and distribution of providers. In 1977 13% of all providers performed 71% of all abortions, freestanding clinics had an average case load of more than 1600 year, hospitals provided 3% of abortions and office-based physicians performed 4%. In contrast to other medical services, abortion is a cash-on-delivery transaction with only 10% of patients submitting insurance forms. Information is provided to consumers regarding cost and quality of services through advertising and professional referral and is relatively widely available due to efforts of women's organizations, evaluative information is also disseminated. In Atlanta, 7 clinics performed 20,337 procedures in 1977, an increase of 1859 from 1976, prices ranging from $125-$165 in 1978 with a coefficient of variation of 0.09, the same since 1972-73. In a survey of 75 university students who had had abortions (16.8% of those who returned a questionnaire distributed at the university), it was found that newspaper and word of mouth are initial information sources about providers. Most important factors in choosing a provider were medical reputation, time required, absence of need for parental consent, and staff attitude. If present trends in delivery of services continue as demand levels off, large freestanding clinics will grow and choices will decrease. Statewide dissemination of information about facilities, particularly to people with access problems, would assist the consumer to increase competition between large and small clinics. 1 option for further research is the comparison of abortion services in different locations with varying market structure and degree of unmet need.

Marketing of menthol cigarettes and consumer perceptions: a review of tobacco industry documents

PubMed Central

2011-01-01

Objective To examine tobacco industry marketing of menthol cigarettes and to determine what the tobacco industry knew about consumer perceptions of menthol. Methods A snowball sampling design was used to systematically search the Legacy Tobacco Documents Library (LTDL) (http://legacy.library.ucsf.edu) between 28 February and 27 April 2010. Of the approximately 11 million documents available in the LTDL, the iterative searches returned tens of thousands of results from the major US tobacco companies and affiliated organisations. A collection of 953 documents from the 1930s to the first decade of the 21st century relevant to 1 or more of the research questions were qualitatively analysed, as follows: (1) are/were menthol cigarettes marketed with health reassurance messages? (2) What other messages come from menthol cigarette advertising? (3) How do smokers view menthol cigarettes? (4) Were menthol cigarettes marketed to specific populations? Results Menthol cigarettes were marketed as, and are perceived by consumers to be, healthier than non-menthol cigarettes. Menthol cigarettes are also marketed to specific social and demographic groups, including African–Americans, young people and women, and are perceived by consumers to signal social group belonging. Conclusions The tobacco industry knew consumers perceived menthol as healthier than non-menthol cigarettes, and this was the intent behind marketing. Marketing emphasising menthol attracts consumers who may not otherwise progress to regular smoking, including young, inexperienced users and those who find ‘regular’ cigarettes undesirable. Such marketing may also appeal to health-concerned smokers who might otherwise quit. PMID:21504928

The role of marketing in pharmaceutical research and development.

PubMed

Calfee, John E

2002-01-01

Pharmaceutical marketing, which is primarily targeted at physicians, has been criticised because it may distort physician prescribing and thus potentially raise costs and/or worsen health. An alternative view, presented in this paper, is that successful marketing of pharmaceuticals can improve consumer welfare by increasing incentives for research and development (R&D) investment and by providing guidance to R&D to make it more consistent with consumer preferences. There are a number of arguments that support this view, despite impediments to pharmaceutical marketing such as the prohibited dissemination of off-label information in the US, difficulties in estimating potential pharmaceutical demand, and the long time lag between demand assessment and the introduction of new drugs. For example, physicians are often slow to modify their prescribing practices, even when new evidence-based practice guidelines are issued by prestigious organisations. Pharmaceutical promotion is likely to be particularly valuable because information plays a key role, is highly technical, and can change rapidly. Even consumer advertising can potentially improve health, for example, by improving patient compliance with drug therapy. In addition to disseminating information about the benefits of new therapies, an essential (and perhaps unique) role for pharmaceutical promotion is to encourage physicians and payers to pay closer attention to consumer needs (i.e. willingness to pay) for new medical technology. Moreover, successful marketing of pharmaceuticals increases the returns from R&D, thus increasing incentives to explore consumer demand and to contribute to basic research on the role of drug therapy. Consumer benefits from this process may be very large.

Optimal load scheduling in commercial and residential microgrids

NASA Astrophysics Data System (ADS)

Ganji Tanha, Mohammad Mahdi

Residential and commercial electricity customers use more than two third of the total energy consumed in the United States, representing a significant resource of demand response. Price-based demand response, which is in response to changes in electricity prices, represents the adjustments in load through optimal load scheduling (OLS). In this study, an efficient model for OLS is developed for residential and commercial microgrids which include aggregated loads in single-units and communal loads. Single unit loads which include fixed, adjustable and shiftable loads are controllable by the unit occupants. Communal loads which include pool pumps, elevators and central heating/cooling systems are shared among the units. In order to optimally schedule residential and commercial loads, a community-based optimal load scheduling (CBOLS) is proposed in this thesis. The CBOLS schedule considers hourly market prices, occupants' comfort level, and microgrid operation constraints. The CBOLS' objective in residential and commercial microgrids is the constrained minimization of the total cost of supplying the aggregator load, defined as the microgrid load minus the microgrid generation. This problem is represented by a large-scale mixed-integer optimization for supplying single-unit and communal loads. The Lagrangian relaxation methodology is used to relax the linking communal load constraint and decompose the independent single-unit functions into subproblems which can be solved in parallel. The optimal solution is acceptable if the aggregator load limit and the duality gap are within the bounds. If any of the proposed criteria is not satisfied, the Lagrangian multiplier will be updated and a new optimal load schedule will be regenerated until both constraints are satisfied. The proposed method is applied to several case studies and the results are presented for the Galvin Center load on the 16th floor of the IIT Tower in Chicago.

Study of Flexible Load Dispatch to Improve the Capacity of Wind Power Absorption

NASA Astrophysics Data System (ADS)

Yunlei, Yang; Shifeng, Zhang; Xiao, Chang; Da, Lei; Min, Zhang; Jinhao, Wang; Shengwen, Li; Huipeng, Li

2017-05-01

The dispatch method which track the trend of load demand by arranging the generation scheme of controllable hydro or thermal units faces great difficulties and challenges. With the increase of renewable energy sources such as wind power and photovoltaic power introduced to grid, system has to arrange much more spinning reserve units to compensate the unbalanced power. How to exploit the peak-shaving potential of flexible load which can be shifted with time or storage energy has become many scholars’ research direction. However, the modelling of different kinds of load and control strategy is considerably difficult, this paper choose the Air Conditioner with compressor which can storage energy in fact to study. The equivalent thermal parameters of Air Conditioner has been established. And with the use of “loop control” strategies, we can predict the regulated power of Air Conditioner. Then we established the Gen-Load optimal scheduling model including flexible load based on traditional optimal scheduling model. At last, an improved IEEE-30 case is used to verify. The result of simulation shows that flexible load can fast-track renewable power changes. More than that, with flexible load and reasonable incentive method to consumers, the operating cost of the system can be greatly cut down.

Face and object encoding under perceptual load: ERP evidence.

PubMed

Neumann, Markus F; Mohamed, Tarik N; Schweinberger, Stefan R

2011-02-14

According to the perceptual load theory, processing of a task-irrelevant distractor is abolished when attentional resources are fully consumed by task-relevant material. As an exception, however, famous faces have been shown to elicit repetition modulations in event-related potentials - an N250r - despite high load at initial presentation, suggesting preserved face-encoding. Here, we recorded N250r repetition modulations by unfamiliar faces, hands, and houses, and tested face specificity of preserved encoding under high load. In an immediate (S1-S2) repetition priming paradigm, participants performed a letter identification task on S1 by indicating whether an "X" vs. "N" was among 6 different (high load condition) or 6 identical (low load condition) letters. Letter strings were superimposed on distractor faces, hands, or houses. Subsequent S2 probes were either identical repetitions of S1 distractors, non-repeated exemplars from the same category, or infrequent butterflies, to which participants responded. Independent of attentional load at S1, an occipito-temporal N250r was found for unfamiliar faces. In contrast, no repetition-related neural modulation emerged for houses or hands. This strongly suggests that a putative face-selective attention module supports encoding under high load, and that similar mechanisms are unavailable for other natural or artificial objects. Copyright © 2010 Elsevier Inc. All rights reserved.

Strategy Guideline. Compact Air Distribution Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burdick, Arlan

2013-06-01

This guideline discusses the benefits and challenges of using a compact air distribution system to handle the reduced loads and reduced air volume needed to condition the space within an energy efficient home. The decision criteria for a compact air distribution system must be determined early in the whole-house design process, considering both supply and return air design. However, careful installation of a compact air distribution system can result in lower material costs from smaller equipment, shorter duct runs, and fewer outlets; increased installation efficiencies, including ease of fitting the system into conditioned space; lower loads on a better balancedmore » HVAC system, and overall improved energy efficiency of the home.« less

Maglev crude oil pipeline

NASA Technical Reports Server (NTRS)

Knolle, Ernst G.

1994-01-01

This maglev crude oil pipeline consists of two conduits guiding an endless stream of long containers. One conduit carries loaded containers and the other empty returns. The containers are levitated by permanent magnets in repulsion and propelled by stationary linear induction motors. The containers are linked to each other in a manner that allows them, while in continuous motion, to be folded into side by side position at loading and unloading points. This folding causes a speed reduction in proportion to the ratio of container diameter to container length. While in side by side position, containers are opened at their ends to be filled or emptied. Container size and speed are elected to produce a desired carrying capacity.

Influence of the glycemic index and glycemic load of the diet in the glycemic control of diabetic children and teenagers.

PubMed

Queiroz, K C; Novato Silva, I; de Cássia Gonçalves Alfenas, R

2012-01-01

Evaluate the influence of the glycemic index (GI) and glycemic load (GL) of the diet in the glycemic control of children and teenagers with type 1 diabetes mellitus (DM1). A total of 146 subjects, aged 7-19 years, monitored at the Division of Pediatric Endocrinology at the HC/UFMG participated in the study. The consumed diet was evaluated using a quantitative food frequency questionnaire previously validated and tested in a pilotproject. The GI of the participant's diet was estimated according to the equation described by Wolever and Jenkins (1986). The GL was estimated using the equation proposed by Foster-Powell et al. (2002). The glycemic control was classified as good, intermediate or poor according to the average of two HbA1c values obtained six months prior to the dietary evaluation date. Subjects that had good glycemic control consumed diets with significantly (Tukey test, p = 0.000) lower GI/GL (54.8 ± 2.7/118.3 ± 29.8) than the ones with intermediate (60.1 ± 3.8/142.5 ± 27.3) and poor (60.3 ± 4.1/153.7 ± 40.7) glycemic control. The diet consumed by 75.5% of diabetics with good glycemic control was classified as medium GL, suggesting that the consumption of medium GL diet may favor an adequate glycemic control. The low GI diet consumed by these participants also presented higher protein content, which might have contributed to the attenuation of the postprandial glycemic response and better glycemic control of these patients. The intake of a reduced GI/GL diet favors the glycemic control of the studied population.

Influence of Altered Mass Loading on Testosterone Levels and Testicular Mass

NASA Technical Reports Server (NTRS)

Wang, Tommy J.; Ortiz, R. M.; Wade, C. E.; Hargens, Alan R. (Technical Monitor)

1996-01-01

Effects of altered load on testosterone levels and testicular mass in mammals are not well defined. Two separate studies (loading;centrifuged; +2G(sub z) and unloading;hindlimb suspension;HLS) were conducted to provide a better understanding of the effects of mass loading on testosterone levels and testicular mass. Daily urine samples were collected, and testicular mass measured at the end of the study. +2G(sub z): Sprague-Dawley rats (230-250 g) were centrifuged for 12 days at +2G(sub z): 8 centrifuged (EC) and 8 off centrifuge controls (OCC). EC had lower body mass, however relative testicular mass was greater. EC exhibited an increase in excreted testosterone levels between days 2 (T2) and 6 (T6), and returned to baseline at T9. HLS: To assess the effects of unloading Sprague-Dawley rats (125-150 g) were studied for 12 days: 10 suspended (Exp) and 10 ambulatory (Ctl). Exp had lower body mass during the study, with reduced absolute and relative testicular mass. Exp demonstrated lower excreted testosterone levels from T5-T12. Conclusions: Loading appears to stimulate anabolism, as opposed to unloading, as indicated by greater relative testicular mass and excreted testosterone levels. Reported changes in muscle mass during loading and unloading coincide with similar changes in excreted testosterone levels.

Effects of varying material properties on the load deformation characteristics of heel cushions.

PubMed

Sun, Pi-Chang; Wei, Hung-Wen; Chen, Chien-Hua; Wu, Chun-Hao; Kao, Hung-Chan; Cheng, Cheng-Kung

2008-07-01

Various insole materials were used in attenuation of heel-strike impact. This study presented a compression test to investigate the deformation characteristics of common heel cushions. There were two materials (thermoplastic elastomer "TPE" and silicone) with three hardness and six thickness being analyzed. They underwent consecutive loading-unloading cycles with a load control mode. The displacement of material thickness was recorded during cyclic compression being applied and released from 0 to 1050 N. The energy input, return and dissipation were evaluated based on the load deformation curves when new and after repeated compression. The TPE recovered more deformed energy and thickness than the silicone after the first loading cycle. The silicone would preserve more strain energy with increasing its hardness for the elastic recovery in the unloading process. The deformed energy was decreased as the original thickness did not completely recover under cyclic tests. The reduction in hysteresis area was gradually converged within 20 cycles. The silicone attenuated more impact energy in the initial cycles, but its energy dissipation was reduced after repeated loading. To increase hardness or thickness should be considered to improve resilience or accommodate persistent compression without flattening. The careful selection of cushion materials is imperative to meet individual functional demands.

Stand structure, fuelloads, and fire behavior in riparian and upland forests, Sierra Nevada Mountains, USA; a comparison of current and reconstructed conditions

Treesearch

Kip Van de Water; Malcolm North

2011-01-01

Fire plays an important role in shaping many Sierran coniferous forests, but longer fire return intervals and reductions in area burned have altered forest conditions. Productive, mesic riparian forests can accumulate high stem densities and fuel loads, making them susceptible to high-severity fire. Fuels treatments applied to upland forests, however, are...

Detoxification of blood using injectable magnetic nanospheres: A conceptual technology description

NASA Astrophysics Data System (ADS)

Kaminski, Michael D.; Rosengart, Axel J.

2005-05-01

We describe injectable magnetic nanospheres as a vehicle for selective detoxification of blood borne toxins. Surface receptors on the freely circulating nanospheres bind to toxins. A hand-held extracorporeal magnetic filter separates the toxin-loaded nanospheres from the clean blood, which is returned to the patient. Details of the technology concept are given and include a state-of-knowledge and research needs.

When Grief Visits School: Organizing a Successful Response. A Resource for Administrators, Counselors, and Other Staff.

ERIC Educational Resources Information Center

Dudley, John

Each week the equivalent of fifty 48-passenger bus loads of students do not return to school because they have died. Created to foster successful responses to crisis situations, this book serves as a step by step reference guide for school administrators, counselors, and other faculty. Techniques are presented for dealing with: (1) murders; (2)…

A 250-Mbit/s ring local computer network using 1.3-microns single-mode optical fibers

NASA Technical Reports Server (NTRS)

Eng, S. T.; Tell, R.; Andersson, T.; Eng, B.

1985-01-01

A 250-Mbit/s three-station fiber-optic ring local computer network was built and successfully demonstrated. A conventional token protocol was employed for bus arbitration to maximize the bus efficiency under high loading conditions, and a non-return-to-zero (NRS) data encoding format was selected for simplicity and maximum utilization of the ECL-circuit bandwidth.

30. HULETT NO. 2 IN MOTION; OPERATOR HAS JUST DUMPED ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

30. HULETT NO. 2 IN MOTION; OPERATOR HAS JUST DUMPED A GRAB BUCKET OF ORE INTO THE RECEIVING HOPPER AND IS READY TO RETURN FOR ANOTHER LOAD. A ROUND TRIP FROM THE BOAT TO THE HOPPER AND BACK CAN BE MADE IN 50 SECONDS. - Pennsylvania Railway Ore Dock, Lake Erie at Whiskey Island, approximately 1.5 miles west of Public Square, Cleveland, Cuyahoga County, OH

Sensitizing Black Adult and Youth Consumers to Targeted Food Marketing Tactics in Their Environments.

PubMed

Isselmann DiSantis, Katherine; Kumanyika, Shiriki; Carter-Edwards, Lori; Rohm Young, Deborah; Grier, Sonya A; Lassiter, Vikki

2017-10-29

Food marketing environments of Black American consumers are heavily affected by ethnically-targeted marketing of sugar sweetened beverages, fast foods, and other products that may contribute to caloric overconsumption. This qualitative study assessed Black consumers' responses to targeted marketing. Black adults (2 mixed gender groups; total n = 30) and youth (2 gender specific groups; total n = 35) from two U.S. communities participated before and after a sensitization procedure-a critical practice used to understand social justice concerns. Pre-sensitization focus groups elicited responses to scenarios about various targeted marketing tactics. Participants were then given an informational booklet about targeted marketing to Black Americans, and all returned for the second (post-sensitization) focus group one week later. Conventional qualitative content analysis of transcripts identified several salient themes: seeing the marketer's perspective ("it's about demand"; "consumers choose"), respect for community ("marketers are setting us up for failure"; "making wrong assumptions"), and food environments as a social justice issue ("no one is watching the door"; "I didn't realize"). Effects of sensitization were reflected in participants' stated reactions to the information in the booklet, and also in the relative occurrence of marketer-oriented themes and social justice-oriented themes, respectively, less and more after sensitization.

"The Google of Healthcare": enabling the privatization of genetic bio/databanking.

PubMed

Spector-Bagdady, Kayte

2016-07-01

23andMe is back on the market as the first direct-to-consumer genetic testing company that "includes reports that meet Food and Drug Administration (FDA) standards…." But, whereas its front-end product is selling individual genetic tests online, its back-end business model is amassing one of the largest privately owned genetic databases in the world. What is the effect, however, of the private control of bio/databases on genetic epidemiology and public health research? The recent federal government notices of proposed rulemaking for: (1) revisions to regulations governing human subjects research and (2) whether certain direct-to-consumer genetic tests should require premarket FDA review, were reviewed and related to the 23andMe product, business model, and consumer agreements. FDA regulatory action so far has focused on the return of consumer test reports but it should also consider the broader misuse of data and information not otherwise protected by human subjects research regulations. As the federal government revises its decades-old human subjects research structure, the Executive Office of the President (EOP) should consider a cohesive approach to regulating private genetic bio/databanks. This strategy should allow the FDA and other agencies to play a role in expanding current regulatory coverage. Copyright © 2016 Elsevier Inc. All rights reserved.

Studies of transformational leadership in consumer service: market orientation behavior and alternative roles for the mediators and moderators of change commitment.

PubMed

Yang, Yi-Feng

2013-12-01

The present paper evaluates the relation between transformational leadership and market orientation along with the mediating and moderating effects of change commitment for employees in customer centers in Taiwan. 327 questionnaires were returned by personnel at several customer centers in four different insurance companies. Inter-rater agreement was acceptable based on the multiple raters (i.e., the consumer-related employees from the division groups) of one individual (i.e., a manager)--indicating the aggregated measures were acceptable. The multi-source sample comprised data taken from the four division centers: phone services, customer representatives, financial specialists, and front-line salespeople. The relations were assessed using a multiple mediation procedure incorporating bootstrap techniques and PRODCLIN2 with structural equation modeling analysis. The results reflect a mediating role for change commitment.

Characterization of Multilayer Piezoelectric Actuators for Use in Active Isolation Mounts

NASA Technical Reports Server (NTRS)

Wise, Stephanie A.; Hooker, Matthew W.

1997-01-01

Active mounts are desirable for isolating spacecraft science instruments from on-board vibrational sources such as motors and release mechanisms. Such active isolation mounts typically employ multilayer piezoelectric actuators to cancel these vibrational disturbances. The actuators selected for spacecraft systems must consume minimal power while exhibiting displacements of 5 to 10 micron under load. This report describes a study that compares the power consumption, displacement, and load characteristics of four commercially available multilayer piezoelectric actuators. The results of this study indicate that commercially available actuators exist that meet or exceed the design requirements used in spacecraft isolation mounts.

Fatigue failure of pb-free electronic packages under random vibration loads

NASA Astrophysics Data System (ADS)

Saravanan, S.; Prabhu, S.; Muthukumar, R.; Gowtham Raj, S.; Arun Veerabagu, S.

2018-03-01

The electronic equipment are used in several fields like, automotive, aerospace, consumer goods where they are subjected to vibration loads leading to failure of solder joints used in these equipment. This paper presents a methodology to predict the fatigue life of Pb-free surface mounted BGA packages subjected to random vibrations. The dynamic characteristics of the PCB, such as the natural frequencies, mode shapes and damping ratios were determined. Spectrum analysis was used to determine the stress response of the critical solder joint and the cumulative fatigue damage accumulated by the solder joint for a specific duration was determined.