Development of technique for air coating and nickel and copper metalization of solar cells

NASA Technical Reports Server (NTRS)

1982-01-01

Solar cells were made with a variety of base metal screen printing inks applied over silicon nitride AR coating and copper electroplated. Fritted and fritless nickel and fritless tin base printing inks were evaluated. Conversion efficiencies as high as 9% were observed with fritted nickel ink contacts, however, curve shapes were generally poor, reflecting high series resistance. Problems encountered in addition to high series reistance included loss of adhesion of the nickel contacts during plating and poor adhesion, oxidation and inferior curve shapes with the tin base contacts.

Analysis of Electrowetting Dynamics with Level Set Method

NASA Astrophysics Data System (ADS)

Park, Jun Kwon; Hong, Jiwoo; Kang, Kwan Hyoung

2009-11-01

Electrowetting is a versatile tool to handle tiny droplets and forms a backbone of digital microfluidics. Numerical analysis is necessary to fully understand the dynamics of electrowetting, especially in designing electrowetting-based liquid lenses and reflective displays. We developed a numerical method to analyze the general contact-line problems, incorporating dynamic contact angle models. The method was applied to the analysis of spreading process of a sessile droplet for step input voltages in electrowetting. The result was compared with experimental data and analytical result which is based on the spectral method. It is shown that contact line friction significantly affects the contact line motion and the oscillation amplitude. The pinning process of contact line was well represented by including the hysteresis effect in the contact angle models.

Simulation study on dynamics model of two kinds of on-orbit soft-contact mechanism

NASA Astrophysics Data System (ADS)

Ye, X.; Dong, Z. H.; Yang, F.

2018-05-01

Aiming at the problem that the operating conditions of the space manipulator is harsh and the space manipulator could not bear the large collision momentum, this paper presents a new concept and technical method, namely soft contact technology. Based on ADAMS dynamics software, this paper compares and simulates the mechanism model of on-orbit soft-contact mechanism based on the bionic model and the integrated double joint model. The main purpose is to verify the path planning ability and the momentum buffering ability based on the different design concept mechanism. The simulation results show that both the two mechanism models have the path planning function before the space target contact, and also has the momentum buffer and controllability during the space target contact process.

Nonlinear dynamics of contact interaction of a size-dependent plate supported by a size-dependent beam

NASA Astrophysics Data System (ADS)

Awrejcewicz, J.; Krysko, V. A.; Yakovleva, T. V.; Pavlov, S. P.; Krysko, V. A.

2018-05-01

A mathematical model of complex vibrations exhibited by contact dynamics of size-dependent beam-plate constructions was derived by taking the account of constraints between these structural members. The governing equations were yielded by variational principles based on the moment theory of elasticity. The centre of the investigated plate was supported by a beam. The plate and the beam satisfied the Kirchhoff/Euler-Bernoulli hypotheses. The derived partial differential equations (PDEs) were reduced to the Cauchy problems by the Faedo-Galerkin method in higher approximations, whereas the Cauchy problem was solved using a few Runge-Kutta methods. Reliability of results was validated by comparing the solutions obtained by qualitatively different methods. Complex vibrations were investigated with the help of methods of nonlinear dynamics such as vibration signals, phase portraits, Fourier power spectra, wavelet analysis, and estimation of the largest Lyapunov exponents based on the Rosenstein, Kantz, and Wolf methods. The effect of size-dependent parameters of the beam and plate on their contact interaction was investigated. It was detected and illustrated that the first contact between the size-dependent structural members implies chaotic vibrations. In addition, problems of chaotic synchronization between a nanoplate and a nanobeam were addressed.

On the the Contact Lens Problem: Modeling Rigid and Elastic Beams on Thin Films

NASA Astrophysics Data System (ADS)

Trinh, Philippe; Wilson, Stephen; Stone, Howard

2011-11-01

Generally, contact lenses are prescribed by the practitioner to fit each individual patient's eye, but these fitting-philosophies are based on empirical studies and a certain degree of trial-and-error. A badly fitted lens can cause a range of afflictions, which varies from mild dry-eye-discomfort, to more serious corneal diseases. Thus, at this heart of this problem, is the question of how a rigid or elastic plate interacts with the free-surface of a thin viscous film. In this talk, we present several mathematical models for the study of these plate-and-fluid problems. Asymptotic and numerical results are described, and we explain the role of elasticity, surface tension, viscosity, and pressure in determining the equilibrium solutions. Finally, we discuss the implications of our work on the contact lens problem, as well as on other coating processes which involve elastic substrates.

Local finite element enrichment strategies for 2D contact computations and a corresponding post-processing scheme

NASA Astrophysics Data System (ADS)

Sauer, Roger A.

2013-08-01

Recently an enriched contact finite element formulation has been developed that substantially increases the accuracy of contact computations while keeping the additional numerical effort at a minimum reported by Sauer (Int J Numer Meth Eng, 87: 593-616, 2011). Two enrich-ment strategies were proposed, one based on local p-refinement using Lagrange interpolation and one based on Hermite interpolation that produces C 1-smoothness on the contact surface. Both classes, which were initially considered for the frictionless Signorini problem, are extended here to friction and contact between deformable bodies. For this, a symmetric contact formulation is used that allows the unbiased treatment of both contact partners. This paper also proposes a post-processing scheme for contact quantities like the contact pressure. The scheme, which provides a more accurate representation than the raw data, is based on an averaging procedure that is inspired by mortar formulations. The properties of the enrichment strategies and the corresponding post-processing scheme are illustrated by several numerical examples considering sliding and peeling contact in the presence of large deformations.

Utilization of health services in relation to mental health problems in adolescents: A population based survey

PubMed Central

Zachrisson, Henrik D; Rödje, Kjetil; Mykletun, Arnstein

2006-01-01

Background Only a minority of adolescents reporting symptoms above case-levels on screenings for mental health seeks and receives help from specialist health services. The objective of this study was to a) examine help-seeking for symptoms of anxiety and depression in relation to symptom load dimensionally, b) identify the level of specialization in mental health among service-providers, and c) identify associations between mental health problems and contact with different types of health services. Methods This cross-sectional school-based study (response-rate 88%, n = 11154) is based on Norwegian health surveys among 15 and 16 year olds. Results We found a dose-response association between symptom-load and help seeking. Only 34% of individuals with mental symptom-load above 99th percentile reported help-seeking in the last 12 months. Forty percent of help seekers were in contact with specialists (psychiatrists or psychologists), the remaining were mainly in contact with GPs. Mental health problems increased help seeking to all twelve service providers examined. Conclusion It might not be reasonable to argue that all adolescents with case-level mental health problems are in need of treatment. However, concerning the 99th percentile, claiming treatment need is less controversial. Even in the Norwegian context where mental health services are relatively available and free of charge, help-seeking in individuals with the highest symptom-loads is still low. Most help seekers achieved contact with health care providers, half of them at a non specialized level. Our results suggest that adolescents' recognition of mental health problems or intention to seek help for these are the major "filters" restricting treatment. PMID:16480522

The steady-state tangential contact problem for a falling drop type of contact area on corrugated rail by simplified theory of rolling contact

NASA Astrophysics Data System (ADS)

Piotrowski, Jerzy

1991-10-01

Investigation of contact mechanical nonlinearities of a mathematical model of corrugation revealed that the typical shape of contact patch resembles a falling drop of water. A contact patch of that shape was approximated with a figure composed of two parts of ellipses with different eccentricities. The contact pressure distribution was assumed as a smoothing ensemble of two paraboloidal distributions. The description of a general case of double half elliptical contact area was given but a special case of double half elliptical contact is more interesting as it possesses some Hertzian properties. It was shown how three geometrical parameters of double half elliptical contact can be chosen when actual, non-Hertzian contact is known. A linear theory was written which indicates that the lateral vibrations of the rail may be excited only due to shape variation on corrugation even if any other cause for these vibrations does not exist. For nonlinear theory a computer program, based on FASTSIM algorithm by Kalker, was written. The aim is to calculate the creep forces and frictional power density distribution over the contact area. Also, a graphic program visualizing the solution was written. Numerical results are not provided; unattended and unsolved problems relevant for this type of contact are listed.

A Jacobian-free Newton Krylov method for mortar-discretized thermomechanical contact problems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hansen, Glen, E-mail: Glen.Hansen@inl.gov

2011-07-20

Multibody contact problems are common within the field of multiphysics simulation. Applications involving thermomechanical contact scenarios are also quite prevalent. Such problems can be challenging to solve due to the likelihood of thermal expansion affecting contact geometry which, in turn, can change the thermal behavior of the components being analyzed. This paper explores a simple model of a light water reactor nuclear fuel rod, which consists of cylindrical pellets of uranium dioxide (UO{sub 2}) fuel sealed within a Zircalloy cladding tube. The tube is initially filled with helium gas, which fills the gap between the pellets and cladding tube. Themore » accurate modeling of heat transfer across the gap between fuel pellets and the protective cladding is essential to understanding fuel performance, including cladding stress and behavior under irradiated conditions, which are factors that affect the lifetime of the fuel. The thermomechanical contact approach developed here is based on the mortar finite element method, where Lagrange multipliers are used to enforce weak continuity constraints at participating interfaces. In this formulation, the heat equation couples to linear mechanics through a thermal expansion term. Lagrange multipliers are used to formulate the continuity constraints for both heat flux and interface traction at contact interfaces. The resulting system of nonlinear algebraic equations are cast in residual form for solution of the transient problem. A Jacobian-free Newton Krylov method is used to provide for fully-coupled solution of the coupled thermal contact and heat equations.« less

A Jacobian-Free Newton Krylov Method for Mortar-Discretized Thermomechanical Contact Problems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glen Hansen

2011-07-01

Multibody contact problems are common within the field of multiphysics simulation. Applications involving thermomechanical contact scenarios are also quite prevalent. Such problems can be challenging to solve due to the likelihood of thermal expansion affecting contact geometry which, in turn, can change the thermal behavior of the components being analyzed. This paper explores a simple model of a light water reactor nuclear reactor fuel rod, which consists of cylindrical pellets of uranium dioxide (UO2) fuel sealed within a Zircalloy cladding tube. The tube is initially filled with helium gas, which fills the gap between the pellets and cladding tube. Themore » accurate modeling of heat transfer across the gap between fuel pellets and the protective cladding is essential to understanding fuel performance, including cladding stress and behavior under irradiated conditions, which are factors that affect the lifetime of the fuel. The thermomechanical contact approach developed here is based on the mortar finite element method, where Lagrange multipliers are used to enforce weak continuity constraints at participating interfaces. In this formulation, the heat equation couples to linear mechanics through a thermal expansion term. Lagrange multipliers are used to formulate the continuity constraints for both heat flux and interface traction at contact interfaces. The resulting system of nonlinear algebraic equations are cast in residual form for solution of the transient problem. A Jacobian-free Newton Krylov method is used to provide for fully-coupled solution of the coupled thermal contact and heat equations.« less

A parallel finite element procedure for contact-impact problems using edge-based smooth triangular element and GPU

NASA Astrophysics Data System (ADS)

Cai, Yong; Cui, Xiangyang; Li, Guangyao; Liu, Wenyang

2018-04-01

The edge-smooth finite element method (ES-FEM) can improve the computational accuracy of triangular shell elements and the mesh partition efficiency of complex models. In this paper, an approach is developed to perform explicit finite element simulations of contact-impact problems with a graphical processing unit (GPU) using a special edge-smooth triangular shell element based on ES-FEM. Of critical importance for this problem is achieving finer-grained parallelism to enable efficient data loading and to minimize communication between the device and host. Four kinds of parallel strategies are then developed to efficiently solve these ES-FEM based shell element formulas, and various optimization methods are adopted to ensure aligned memory access. Special focus is dedicated to developing an approach for the parallel construction of edge systems. A parallel hierarchy-territory contact-searching algorithm (HITA) and a parallel penalty function calculation method are embedded in this parallel explicit algorithm. Finally, the program flow is well designed, and a GPU-based simulation system is developed, using Nvidia's CUDA. Several numerical examples are presented to illustrate the high quality of the results obtained with the proposed methods. In addition, the GPU-based parallel computation is shown to significantly reduce the computing time.

Double and multiple contacts of similar elastic materials

NASA Astrophysics Data System (ADS)

Sundaram, Narayan K.

Ongoing fretting fatigue research has focussed on developing robust contact mechanics solutions for complicated load histories involving normal, shear, moment and bulk loads. For certain indenter profiles and applied loads, the contact patch separates into two disconnected regions. Existing Singular Integral Equation (SIE) techniques do not address these situations. A fast numerical tool is developed to solve such problems for similar elastic materials for a wide range of profiles and load paths including applied moments and remote bulk-stress effects. This tool is then used to investigate two problems in double contacts. The first, to determine the shear configuration space for a biquadratic punch for the generalized Cattaneo-Mindlin problem. The second, to obtain quantitative estimates of the interaction between neighboring cylindrical contacts for both the applied normal load and partial slip problems up to the limits of validity of the halfspace assumption. In double contact problems without symmetry, obtaining a unique solution requires the satisfaction of a condition relating the contact ends, rigid-body rotation and profile function. This condition has the interpretation that a rigid-rod connecting the inner contact ends of an equivalent frictionless double contact of a rigid indenter and halfspace may only undergo rigid body motions. It is also found that the ends of stick-zones, local slips and remote-applied strains in double contact problems are related by an equation expressing tangential surface-displacement continuity. This equation is essential to solve partial-slip problems without contact equivalents. Even when neighboring cylindrical contacts may be treated as non-interacting for the purpose of determining the pressure tractions, this is not generally true if a shear load is applied. The mutual influence of neighboring contacts in partial slip problems is largest at small shear load fractions. For both the pressure and partial slip problems, the interactions are stronger with increasing strength of loading and contact proximity. A new contact algorithm is developed and the SIE method extended to tackle contact problems with an arbitrary number of contact patches with no approximations made about contact interactions. In the case of multiple contact problems determining the correct contact configuration is significantly more complicated than in double contacts, necessitating a new approach. Both the normal contact and partial slip problems are solved. The tool is then used to study contacts of regular rough cylinders, a flat with rounded punch with superimposed sinusoidal roughness and is also applied to analyze the contact of an experimental rough surface with a halfspace. The partial slip results for multiple-contacts are generally consistent with Cattaneo-Mindlin continuum scale results, in that the outermost contacts tend to be in full sliding. Lastly, the influence of plasticity on frictionless multiple contact problems is studied using FEM for two common steel and aluminum alloys. The key findings are that the plasticity decreases the peak pressure and increases both real and apparent contact areas, thus 'blunting' the sharp pressures caused by the contact asperities in pure elasticity. Further, it is found that contact plasticity effects and load for onset of first yield are strongly dependent on roughness amplitude, with higher plasticity effects and lower yield-onset load at higher roughness amplitudes.

A finite element-based algorithm for rubbing induced vibration prediction in rotors

NASA Astrophysics Data System (ADS)

Behzad, Mehdi; Alvandi, Mehdi; Mba, David; Jamali, Jalil

2013-10-01

In this paper, an algorithm is developed for more realistic investigation of rotor-to-stator rubbing vibration, based on finite element theory with unilateral contact and friction conditions. To model the rotor, cross sections are assumed to be radially rigid. A finite element discretization based on traditional beam theories which sufficiently accounts for axial and transversal flexibility of the rotor is used. A general finite element discretization model considering inertial and viscoelastic characteristics of the stator is used for modeling the stator. Therefore, for contact analysis, only the boundary of the stator is discretized. The contact problem is defined as the contact between the circular rigid cross section of the rotor and “nodes” of the stator only. Next, Gap function and contact conditions are described for the contact problem. Two finite element models of the rotor and the stator are coupled via the Lagrange multipliers method in order to obtain the constrained equation of motion. A case study of the partial rubbing is simulated using the algorithm. The synchronous and subsynchronous responses of the partial rubbing are obtained for different rotational speeds. In addition, a sensitivity analysis is carried out with respect to the initial clearance, the stator stiffness, the damping parameter, and the coefficient of friction. There is a good agreement between the result of this research and the experimental result in the literature.

Dynamics of the Molten Contact Line

NASA Technical Reports Server (NTRS)

Sonin, Ain A.; Schiaffino, Stefano

1996-01-01

In contrast to the ordinary contact line problem, virtually no information is available on the similar problem associated with a molten material spreading on a solid which is below the melt's fusion point. The latter is a more complex problem which heat transfer and solidification take place simultaneously with spreading, and requires answers not only for the hot melt's advance speed over the cold solid as a function of contact angle, but also for how one is to predict the point of the molten contact line's arrest by freezing. This issues are of importance in evolving methods of materials processing. The purpose of our work is to develop, based on both experiments and theory, an understanding of the dynamic processes that occur when a molten droplet touches a subcooled solid, spreads partly over it by capillary action, and freezes. We seek answers to the following basic questions. First, what is the relationship between the melt's contact line speed and the apparent (dynamic) contact angle? Secondly, at what point will the contact line modon be arrested by freezing? The talk will describe three components of our work: (1) deposition experiments with small molten droplets; (2) investigation of the dynamics of the molten contact line by means of a novel forced spreading method; and (3) an attempt to provide a theoretical framework for answering the basic questions posed above.

FASTSIM2: a second-order accurate frictional rolling contact algorithm

NASA Astrophysics Data System (ADS)

Vollebregt, E. A. H.; Wilders, P.

2011-01-01

In this paper we consider the frictional (tangential) steady rolling contact problem. We confine ourselves to the simplified theory, instead of using full elastostatic theory, in order to be able to compute results fast, as needed for on-line application in vehicle system dynamics simulation packages. The FASTSIM algorithm is the leading technology in this field and is employed in all dominant railway vehicle system dynamics packages (VSD) in the world. The main contribution of this paper is a new version "FASTSIM2" of the FASTSIM algorithm, which is second-order accurate. This is relevant for VSD, because with the new algorithm 16 times less grid points are required for sufficiently accurate computations of the contact forces. The approach is based on new insights in the characteristics of the rolling contact problem when using the simplified theory, and on taking precise care of the contact conditions in the numerical integration scheme employed.

The non-contact biometric identified bio signal measurement sensor and algorithms.

PubMed

Kim, Chan-Il; Lee, Jong-Ha

2018-01-01

In these days, wearable devices have been developed for effectively measuring biological data. However, these devices have tissue allege and noise problem. To solve these problems, biometric measurement based on a non-contact method, such as face image sequencing is developed. This makes it possible to measure biometric data without any operation and side effects. However, it is impossible for a remote center to identify the person whose data are measured by the novel methods. In this paper, we propose the novel non-contact heart rate and blood pressure imaging system, Deep Health Eye. This system has authentication process at the same time as measuring bio signals, through non-contact method. In the future, this system can be convenient home bio signal monitoring system by combined with smart mirror.

Multigrid contact detection method

NASA Astrophysics Data System (ADS)

He, Kejing; Dong, Shoubin; Zhou, Zhaoyao

2007-03-01

Contact detection is a general problem of many physical simulations. This work presents a O(N) multigrid method for general contact detection problems (MGCD). The multigrid idea is integrated with contact detection problems. Both the time complexity and memory consumption of the MGCD are O(N) . Unlike other methods, whose efficiencies are influenced strongly by the object size distribution, the performance of MGCD is insensitive to the object size distribution. We compare the MGCD with the no binary search (NBS) method and the multilevel boxing method in three dimensions for both time complexity and memory consumption. For objects with similar size, the MGCD is as good as the NBS method, both of which outperform the multilevel boxing method regarding memory consumption. For objects with diverse size, the MGCD outperform both the NBS method and the multilevel boxing method. We use the MGCD to solve the contact detection problem for a granular simulation system based on the discrete element method. From this granular simulation, we get the density property of monosize packing and binary packing with size ratio equal to 10. The packing density for monosize particles is 0.636. For binary packing with size ratio equal to 10, when the number of small particles is 300 times as the number of big particles, the maximal packing density 0.824 is achieved.

A Novel Face-on-Face Contact Method for Nonlinear Solid Mechanics

NASA Astrophysics Data System (ADS)

Wopschall, Steven Robert

The implicit solution to contact problems in nonlinear solid mechanics poses many difficulties. Traditional node-to-segment methods may suffer from locking and experience contact force chatter in the presence of sliding. More recent developments include mortar based methods, which resolve local contact interactions over face-pairs and feature a kinematic constraint in integral form that smoothes contact behavior, especially in the presence of sliding. These methods have been shown to perform well in the presence of geometric nonlinearities and are demonstratively more robust than node-to-segment methods. These methods are typically biased, however, interpolating contact tractions and gap equations on a designated non-mortar face, which leads to an asymmetry in the formulation. Another challenge is constraint enforcement. The general selection of the active set of constraints is brought with difficulty, often leading to non-physical solutions and easily resulting in missed face-pair interactions. Details on reliable constraint enforcement methods are lacking in the greater contact literature. This work presents an unbiased contact formulation utilizing a median-plane methodology. Up to linear polynomials are used for the discrete pressure representation and integral gap constraints are enforced using a novel subcycling procedure. This procedure reliably determines the active set of contact constraints leading to physical and kinematically admissible solutions void of heuristics and user action. The contact method presented herein successfully solves difficult quasi-static contact problems in the implicit computational setting. These problems feature finite deformations, material nonlinearity, and complex interface geometries, all of which are challenging characteristics for contact implementations and constraint enforcement algorithms. The subcycling procedure is a key feature of this method, handling active constraint selection for complex interfaces and mesh geometries.

Rolling contact of a rigid sphere/sliding of a spherical indenter upon a viscoelastic half-space containing an ellipsoidal inhomogeneity

NASA Astrophysics Data System (ADS)

Koumi, Koffi Espoir; Chaise, Thibaut; Nelias, Daniel

2015-07-01

In this paper, the frictionless rolling contact problem between a rigid sphere and a viscoelastic half-space containing one elastic inhomogeneity is solved. The problem is equivalent to the frictionless sliding of a spherical tip over a viscoelastic body. The inhomogeneity may be of spherical or ellipsoidal shape, the later being of any orientation relatively to the contact surface. The model presented here is three dimensional and based on semi-analytical methods. In order to take into account the viscoelastic aspect of the problem, contact equations are discretized in the spatial and temporal dimensions. The frictionless rolling of the sphere, assumed rigid here for the sake of simplicity, is taken into account by translating the subsurface viscoelastic fields related to the contact problem. Eshelby's formalism is applied at each step of the temporal discretization to account for the effect of the inhomogeneity on the contact pressure distribution, subsurface stresses, rolling friction and the resulting torque. A Conjugate Gradient Method and the Fast Fourier Transforms are used to reduce the computation cost. The model is validated by a finite element model of a rigid sphere rolling upon a homogeneous vciscoelastic half-space, as well as through comparison with reference solutions from the literature. A parametric analysis of the effect of elastic properties and geometrical features of the inhomogeneity is performed. Transient and steady-state solutions are obtained. Numerical results about the contact pressure distribution, the deformed surface geometry, the apparent friction coefficient as well as subsurface stresses are presented, with or without heterogeneous inclusion.

Finite Element Modeling of a Cylindrical Contact Using Hertzian Assumptions

NASA Technical Reports Server (NTRS)

Knudsen, Erik

2003-01-01

The turbine blades in the high-pressure fuel turbopump/alternate turbopump (HPFTP/AT) are subjected to hot gases rapidly flowing around them. This flow excites vibrations in the blades. Naturally, one has to worry about resonance, so a damping device was added to dissipate some energy from the system. The foundation is now laid for a very complex problem. The damper is in contact with the blade, so now there are contact stresses (both normal and tangential) to contend with. Since these stresses can be very high, it is not all that difficult to yield the material. Friction is another non-linearity and the blade is made out of a Nickel-based single-crystal superalloy that is orthotropic. A few approaches exist to solve such a problem and computer models, using contact elements, have been built with friction, plasticity, etc. These models are quite cumbersome and require many hours to solve just one load case and material orientation. A simpler approach is required. Ideally, the model should be simplified so the analysis can be conducted faster. When working with contact problems determining the contact patch and the stresses in the material are the main concerns. Closed-form solutions for non-conforming bodies, developed by Hertz, made out of isotropic materials are readily available. More involved solutions for 3-D cases using different materials are also available. The question is this: can Hertzian1 solutions be applied, or superimposed, to more complicated problems-like those involving anisotropic materials? That is the point of the investigation here. If these results agree with the more complicated computer models, then the analytical solutions can be used in lieu of the numerical solutions that take a very long time to process. As time goes on, the analytical solution will eventually have to include things like friction and plasticity. The models in this report use no contact elements and are essentially an applied load problem using Hertzian assumptions to determine the contact patch dimensions.

Children Exposed to Intimate Partner Violence: Conduct Problems, Interventions, and Partner Contact With the Child.

PubMed

Jouriles, Ernest N; Rosenfield, David; McDonald, Renee; Vu, Nicole L; Rancher, Caitlin; Mueller, Victoria

2018-01-01

Children's contact with their mother's violent partner is a potentially important variable for understanding conduct problems among children exposed to intimate partner violence (IPV). Within the context of a treatment study evaluating a parenting intervention (Project Support) for families exiting a domestic violence shelter, this study tested four hypotheses regarding children's postshelter contact with their mother's violent partner: (1) participation in Project Support decreases the frequency of children's contact with their mother's violent partner; (2) postshelter contact is positively associated with children's conduct problems and is associated more strongly for girls than boys; (3) frequency of contact mediates Project Support's effects on children's conduct problems; and (4) frequency of contact is positively associated with IPV and partner-child aggression, and these latter associations help explain effects of contact on children's conduct problems. Participants were 66 women (26 White) with a child (32 girls) between 4 and 9 years. Families were assessed every 4 months for 20 months after departure from a domestic violence shelter. Project Support reduced the extent of partner-child contact. In addition, within-subject changes in contact over time were associated with girls', but not boys', conduct problems, and it partially mediated effects of Project Support on girls' conduct problems. Higher average levels of contact over time were also positively associated with further incidents of IPV and partner-child aggression, and partner-child aggression helped explain effects of contact on children's conduct problems. Children's postshelter contact with the mother's violent partner relates positively to several negative family outcomes.

Non-Residential Father-Child Involvement, Interparental Conflict and Mental Health of Children Following Divorce: A Person-Focused Approach.

PubMed

Elam, Kit K; Sandler, Irwin; Wolchik, Sharlene; Tein, Jenn-Yun

2016-03-01

Variable-centered research has found complex relationships between child well-being and two critical aspects of the post-divorce family environment: the level of non-residential father involvement (i.e., contact and supportive relationship) with their children and the level of conflict between the father and mother. However, these analyses fail to capture individual differences based on distinct patterns of interparental conflict, father support and father contact. Using a person-centered latent profile analysis, the present study examined (1) profiles of non-residential father contact, support, and interparental conflict in the 2 years following divorce (N = 240), when children (49 % female) were between 9 and 12 years of age and (2) differences across profiles in concurrent child adjustment outcomes as well as outcomes 6 years later. Four profiles of father involvement were identified: High Contact-Moderate Conflict-Moderate Support, Low Contact-Moderate Conflict-Low Support, High Conflict-Moderate Contact-Moderate Support, and Low Conflict-Moderate Contact-Moderate Support. Concurrently, children with fathers in the group with high conflict were found to have significantly greater internalizing and externalizing problems compared to all other groups. Six years later, children with fathers in the group with low contact and low support were found to have greater internalizing and externalizing problems compared to children with fathers in the high conflict group, and also greater internalizing problems compared to children with fathers in the low conflict group. These results provide insight into the complex relationship among non-residential fathers' conflict, contact, and support in child adjustment within divorcing families.

Low-Velocity Impact Response of Sandwich Beams with Functionally Graded Core

NASA Technical Reports Server (NTRS)

Apetre, N. A.; Sankar, B. V.; Ambur, D. R.

2006-01-01

The problem of low-speed impact of a one-dimensional sandwich panel by a rigid cylindrical projectile is considered. The core of the sandwich panel is functionally graded such that the density, and hence its stiffness, vary through the thickness. The problem is a combination of static contact problem and dynamic response of the sandwich panel obtained via a simple nonlinear spring-mass model (quasi-static approximation). The variation of core Young's modulus is represented by a polynomial in the thickness coordinate, but the Poisson's ratio is kept constant. The two-dimensional elasticity equations for the plane sandwich structure are solved using a combination of Fourier series and Galerkin method. The contact problem is solved using the assumed contact stress distribution method. For the impact problem we used a simple dynamic model based on quasi-static behavior of the panel - the sandwich beam was modeled as a combination of two springs, a linear spring to account for the global deflection and a nonlinear spring to represent the local indentation effects. Results indicate that the contact stiffness of thc beam with graded core Increases causing the contact stresses and other stress components in the vicinity of contact to increase. However, the values of maximum strains corresponding to the maximum impact load arc reduced considerably due to grading of thc core properties. For a better comparison, the thickness of the functionally graded cores was chosen such that the flexural stiffness was equal to that of a beam with homogeneous core. The results indicate that functionally graded cores can be used effectively to mitigate or completely prevent impact damage in sandwich composites.

Contact and Context: Sharing Education and Building Relationships in a Divided Society

ERIC Educational Resources Information Center

Hughes, Joanne

2014-01-01

One approach to tackling problems of division in society has been to promote collaboration and engagement between schools separated on ethno-religious lines. Based on some variant of contact theory, the received wisdom is that inter-group encounters can contribute to prejudice reduction and promote more harmonious relationships. Evidence to…

Finite element analysis of steady and transiently moving/rolling nonlinear viscoelastic structure. III - Impact/contact simulations

NASA Technical Reports Server (NTRS)

Nakajima, Yukio; Padovan, Joe

1987-01-01

In a three-part series of papers, a generalized finite element methodology is formulated to handle traveling load problems involving large deformation fields in structure composed of viscoelastic media. The main thrust of this paper is to develop an overall finite element methodology and associated solution algorithms to handle the transient aspects of moving problems involving contact impact type loading fields. Based on the methodology and algorithms formulated, several numerical experiments are considered. These include the rolling/sliding impact of tires with road obstructions.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Unseren, M.A.

A general framework for solving the dynamic load distribution when two manipulators hold a rigid object is proposed. The underspecified problem of solving for the contact forces and torques based on the object`s equations of motion is transformed into a well specified problem. This is accomplished by augmenting the object`s equations of motion with additional equations which relate a new vector variable quantifying the internal contact force and torque degrees of freedom (DOF) as a linear function of the contact forces and torques. The resulting augmented system yields a well specified solution for the contact forces and torques in whichmore » they are separated into their motion inducing and internal components. A particular solution is suggested which enables the designer to conveniently specify what portion of the payload`s mass each manipulator is to bear. It is also shown that the results of the previous work are just a special case of the general load distribution framework described here.« less

The Drug Problem in Black Communities. Working Paper 87-01-01.

ERIC Educational Resources Information Center

Ferguson, Ronald F.

The drug problem among blacks in the United States is analyzed, focusing on low-income communities and the involvement of children. Interviews with more than 30 community-based black professionals in Washington (District of Columbia), Cleveland (Ohio), and San Francisco (California), whose jobs place them in daily contact with the drug problem,…

Contact problem for an elastic reinforcement bonded to an elastic plate

NASA Technical Reports Server (NTRS)

Erdogan, F.; Civelek, M. B.

1973-01-01

The stiffening layer is treated as an elastic membrane and the base plate is assumed to be an elastic continuum. The bonding between the two materials is assumed to be either one of direct adhesion ro through a thin adhesive layer which is treated as a shear spring. The solution for the simple case in which both the stiffener and the base plate are treated as membranes is also given. The contact stress is obtained for a series of numerical examples. In the direct adhesion case the contact stress becomes infinite at the stiffener ends with a typical square root singularity for the continuum model, and behaving as a delta function for the membrane model. In the case of bonding through an adhesive layer the contact stress becomes finite and continuous along the entire contact area.

Non-Residential Father-Child Involvement, Interparental Conflict and Mental Health of Children Following Divorce: A Person-Focused Approach

PubMed Central

Elam, Kit K.; Sandler, Irwin; Wolchik, Sharlene; Tein, Jenn-Yun

2015-01-01

Variable-centered research has found complex relationships between child well-being and two critical aspects of the post-divorce family environment: the level of non-residential father involvement (i.e., contact and supportive relationship) with their children and the level of conflict between the father and mother. However, these analyses fail to capture individual differences based on distinct patterns of interparental conflict, father support and father contact. Using a person-centered latent profile analysis, the present study examined (1) profiles of non-residential father contact, support, and interparental conflict in the two years following divorce (N = 240), when children (49% female) were between 9 and 12 years of age and (2) differences across profiles in concurrent child adjustment outcomes as well as outcomes six years later. Four profiles of father involvement were identified: High Contact – Moderate Conflict – Moderate Support, Low Contact – Moderate Conflict – Low Support, High Conflict – Moderate Contact –Moderate Support, and Low Conflict – Moderate Contact – Moderate Support. Concurrently, children with fathers in the group with high conflict were found to have significantly greater internalizing and externalizing problems compared to all other groups. Six years later, children with fathers in the group with low contact and low support were found to have greater internalizing and externalizing problems compared to children with fathers in the high conflict group, and also greater internalizing problems compared to children with fathers in the low conflict group. These results provide insight into the complex relationship among non-residential fathers’ conflict, contact, and support in child adjustment within divorcing families. PMID:26692236

Crashworthiness simulations with DYNA3D

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schauer, D.A.; Hoover, C.G.; Kay, G.J.

1996-04-01

Current progress in parallel algorithm research and applications in vehicle crash simulation is described for the explicit, finite element algorithms in DYNA3D. Problem partitioning methods and parallel algorithms for contact at material interfaces are the two challenging algorithm research problems that are addressed. Two prototype parallel contact algorithms have been developed for treating the cases of local and arbitrary contact. Demonstration problems for local contact are crashworthiness simulations with 222 locally defined contact surfaces and a vehicle/barrier collision modeled with arbitrary contact. A simulation of crash tests conducted for a vehicle impacting a U-channel small sign post embedded in soilmore » has been run on both the serial and parallel versions of DYNA3D. A significant reduction in computational time has been observed when running these problems on the parallel version. However, to achieve maximum efficiency, complex problems must be appropriately partitioned, especially when contact dominates the computation.« less

An elastic-plastic contact model for line contact structures

NASA Astrophysics Data System (ADS)

Zhu, Haibin; Zhao, Yingtao; He, Zhifeng; Zhang, Ruinan; Ma, Shaopeng

2018-06-01

Although numerical simulation tools are now very powerful, the development of analytical models is very important for the prediction of the mechanical behaviour of line contact structures for deeply understanding contact problems and engineering applications. For the line contact structures widely used in the engineering field, few analytical models are available for predicting the mechanical behaviour when the structures deform plastically, as the classic Hertz's theory would be invalid. Thus, the present study proposed an elastic-plastic model for line contact structures based on the understanding of the yield mechanism. A mathematical expression describing the global relationship between load history and contact width evolution of line contact structures was obtained. The proposed model was verified through an actual line contact test and a corresponding numerical simulation. The results confirmed that this model can be used to accurately predict the elastic-plastic mechanical behaviour of a line contact structure.

Contact angle adjustment in equation-of-state-based pseudopotential model.

PubMed

Hu, Anjie; Li, Longjian; Uddin, Rizwan; Liu, Dong

2016-05-01

The single component pseudopotential lattice Boltzmann model has been widely applied in multiphase simulation due to its simplicity and stability. In many studies, it has been claimed that this model can be stable for density ratios larger than 1000. However, the application of the model is still limited to small density ratios when the contact angle is considered. The reason is that the original contact angle adjustment method influences the stability of the model. Moreover, simulation results in the present work show that, by applying the original contact angle adjustment method, the density distribution near the wall is artificially changed, and the contact angle is dependent on the surface tension. Hence, it is very inconvenient to apply this method with a fixed contact angle, and the accuracy of the model cannot be guaranteed. To solve these problems, a contact angle adjustment method based on the geometry analysis is proposed and numerically compared with the original method. Simulation results show that, with our contact angle adjustment method, the stability of the model is highly improved when the density ratio is relatively large, and it is independent of the surface tension.

Contact angle adjustment in equation-of-state-based pseudopotential model

NASA Astrophysics Data System (ADS)

Hu, Anjie; Li, Longjian; Uddin, Rizwan; Liu, Dong

2016-05-01

The single component pseudopotential lattice Boltzmann model has been widely applied in multiphase simulation due to its simplicity and stability. In many studies, it has been claimed that this model can be stable for density ratios larger than 1000. However, the application of the model is still limited to small density ratios when the contact angle is considered. The reason is that the original contact angle adjustment method influences the stability of the model. Moreover, simulation results in the present work show that, by applying the original contact angle adjustment method, the density distribution near the wall is artificially changed, and the contact angle is dependent on the surface tension. Hence, it is very inconvenient to apply this method with a fixed contact angle, and the accuracy of the model cannot be guaranteed. To solve these problems, a contact angle adjustment method based on the geometry analysis is proposed and numerically compared with the original method. Simulation results show that, with our contact angle adjustment method, the stability of the model is highly improved when the density ratio is relatively large, and it is independent of the surface tension.

Skin Problems: How to Protect Yourself from Job-Related Skin Problems

MedlinePlus

... You can get it from contact or allergies. Contact dermatitis occurs from frequent contact with substances, such as: ... Health: Haz-Map, Chemicals that Cause Occupational Allergic Contact Dermatitis Last Updated: June 2, 2017 This article was ...

On foundations of discrete element analysis of contact in diarthrodial joints.

PubMed

Volokh, K Y; Chao, E Y S; Armand, M

2007-06-01

Information about the stress distribution on contact surfaces of adjacent bones is indispensable for analysis of arthritis, bone fracture and remodeling. Numerical solution of the contact problem based on the classical approaches of solid mechanics is sophisticated and time-consuming. However, the solution can be essentially simplified on the following physical grounds. The bone contact surfaces are covered with a layer of articular cartilage, which is a soft tissue as compared to the hard bone. The latter allows ignoring the bone compliance in analysis of the contact problem, i.e. rigid bones are considered to interact through a compliant cartilage. Moreover, cartilage shear stresses and strains can be ignored because of the negligible friction between contacting cartilage layers. Thus, the cartilage can be approximated by a set of unilateral compressive springs normal to the bone surface. The forces in the springs can be computed from the equilibrium equations iteratively accounting for the changing contact area. This is the essence of the discrete element analysis (DEA). Despite the success in applications of DEA to various bone contact problems, its classical formulation required experimental validation because the springs approximating the cartilage were assumed linear while the real articular cartilage exhibited non-linear mechanical response in reported tests. Recent experimental results of Ateshian and his co-workers allow for revisiting the classical DEA formulation and establishing the limits of its applicability. In the present work, it is shown that the linear spring model is remarkably valid within a wide range of large deformations of the cartilage. It is also shown how to extend the classical DEA to the case of strong nonlinearity if necessary.

Contact Allergy: A Review of Current Problems from a Clinical Perspective.

PubMed

Uter, Wolfgang; Werfel, Thomas; White, Ian R; Johansen, Jeanne D

2018-05-29

Contact allergy is common, affecting 27% of the general population in Europe. Original publications, including case reports, published since 2016 (inclusive) were identified with the aim of collating a full review of current problems in the field. To this end, a literature search employing methods of systematic reviewing was performed in the Medline ® and Web of Science™ databases on 28 January 2018, using the search terms ("contact sensitization" or "contact allergy"). Of 446 non-duplicate publications identified by above search, 147 were excluded based on scrutiny of title, abstract and key words. Of the remaining 299 examined in full text, 291 were deemed appropriate for inclusion, and main findings were summarised in topic sections. In conclusion, diverse sources of exposures to chemicals of widely-differing types and structures, continue to induce sensitisation in man and may result in allergic contact dermatitis. Many of the chemicals are "evergreen" but others are "newcomers". Vigilance and proper investigation (patch testing) are required to detect and inform of the presence of these haptens to which our populations remain exposed.

Multigrid Methods for EHL Problems

NASA Technical Reports Server (NTRS)

Nurgat, Elyas; Berzins, Martin

1996-01-01

In many bearings and contacts, forces are transmitted through thin continuous fluid films which separate two contacting elements. Objects in contact are normally subjected to friction and wear which can be reduced effectively by using lubricants. If the lubricant film is sufficiently thin to prevent the opposing solids from coming into contact and carries the entire load, then we have hydrodynamic lubrication, where the lubricant film is determined by the motion and geometry of the solids. However, for loaded contacts of low geometrical conformity, such as gears, rolling contact bearings and cams, this is not the case due to high pressures and this is referred to as Elasto-Hydrodynamic Lubrication (EHL) In EHL, elastic deformation of the contacting elements and the increase in fluid viscosity with pressure are very significant and cannot be ignored. Since the deformation results in changing the geometry of the lubricating film, which in turn determines the pressure distribution, an EHL mathematical model must simultaneously satisfy the complex elasticity (integral) and the Reynolds lubrication (differential) equations. The nonlinear and coupled nature of the two equations makes numerical calculations computationally intensive. This is especially true for highly loaded problems found in practice. One novel feature of these problems is that the solution may exhibit sharp pressure spikes in the outlet region. To this date both finite element and finite difference methods have been used to solve EHL problems with perhaps greater emphasis on the use of the finite difference approach. In both cases, a major computational difficulty is ensuring convergence of the nonlinear equations solver to a steady state solution. Two successful methods for achieving this are direct iteration and multigrid methods. Direct iteration methods (e.g Gauss Seidel) have long been used in conjunction with finite difference discretizations on regular meshes. Perhaps one of the best examples of the application of such methods is the recent Effective Influence Method of Dowson and Wang. Multigrid methods have also been used with great success by Venner and Venner and Lubrecht with a good summary being given by Venner. As both these finite difference discretization based approaches appear to provide an efficient way of solving EHL problems, it is important to understand their relative merits. This paper is a first attempt at providing such an understanding in the context of EHL point contact problem, (contact of two spheres), in which the contact zone is a point and an ellipse or circle for unloaded and loaded dry contacts respectively. Since the film thickness and the contact width are generally small compared to the local radius of curvature of the two surfaces, the reduced geometry of the surfaces in the contact area can be accurately approximated to the contact between a paraboloid and a flat surface. The layout of the remainder of this paper is as follows. In section 2 we introduce the form of the equations to be solved. The Effective Influence Newton Method is described in Section 3 while Section 4 describes the Multigrid method to be used. Sections 5 and 6 describe the test problems to be used in the comparison between the two methods and compare the performance of the two methods. Section 7 concludes the paper with an argument of the two methods and suggests some future research directions.

Color-gradient lattice Boltzmann model for simulating droplet motion with contact-angle hysteresis.

PubMed

Ba, Yan; Liu, Haihu; Sun, Jinju; Zheng, Rongye

2013-10-01

Lattice Boltzmann method (LBM) is an effective tool for simulating the contact-line motion due to the nature of its microscopic dynamics. In contact-line motion, contact-angle hysteresis is an inherent phenomenon, but it is neglected in most existing color-gradient based LBMs. In this paper, a color-gradient based multiphase LBM is developed to simulate the contact-line motion, particularly with the hysteresis of contact angle involved. In this model, the perturbation operator based on the continuum surface force concept is introduced to model the interfacial tension, and the recoloring operator proposed by Latva-Kokko and Rothman is used to produce phase segregation and resolve the lattice pinning problem. At the solid surface, the color-conserving wetting boundary condition [Hollis et al., IMA J. Appl. Math. 76, 726 (2011)] is applied to improve the accuracy of simulations and suppress spurious currents at the contact line. In particular, we present a numerical algorithm to allow for the effect of the contact-angle hysteresis, in which an iterative procedure is used to determine the dynamic contact angle. Numerical simulations are conducted to verify the developed model, including the droplet partial wetting process and droplet dynamical behavior in a simple shear flow. The obtained results are compared with theoretical solutions and experimental data, indicating that the model is able to predict the equilibrium droplet shape as well as the dynamic process of partial wetting and thus permits accurate prediction of contact-line motion with the consideration of contact-angle hysteresis.

Partition method and experimental validation for impact dynamics of flexible multibody system

NASA Astrophysics Data System (ADS)

Wang, J. Y.; Liu, Z. Y.; Hong, J. Z.

2018-06-01

The impact problem of a flexible multibody system is a non-smooth, high-transient, and strong-nonlinear dynamic process with variable boundary. How to model the contact/impact process accurately and efficiently is one of the main difficulties in many engineering applications. The numerical approaches being used widely in impact analysis are mainly from two fields: multibody system dynamics (MBS) and computational solid mechanics (CSM). Approaches based on MBS provide a more efficient yet less accurate analysis of the contact/impact problems, while approaches based on CSM are well suited for particularly high accuracy needs, yet require very high computational effort. To bridge the gap between accuracy and efficiency in the dynamic simulation of a flexible multibody system with contacts/impacts, a partition method is presented considering that the contact body is divided into two parts, an impact region and a non-impact region. The impact region is modeled using the finite element method to guarantee the local accuracy, while the non-impact region is modeled using the modal reduction approach to raise the global efficiency. A three-dimensional rod-plate impact experiment is designed and performed to validate the numerical results. The principle for how to partition the contact bodies is proposed: the maximum radius of the impact region can be estimated by an analytical method, and the modal truncation orders of the non-impact region can be estimated by the highest frequency of the signal measured. The simulation results using the presented method are in good agreement with the experimental results. It shows that this method is an effective formulation considering both accuracy and efficiency. Moreover, a more complicated multibody impact problem of a crank slider mechanism is investigated to strengthen this conclusion.

The Value Range of Contact Stiffness Factor between Pile and Soil Based on Penalty Function

NASA Astrophysics Data System (ADS)

Chen, Sandy H. L.; Wu, Xinliu

2018-03-01

The value range of contact stiffness factor based on penalty function is studied when we use finite element software ANSYS to analyze contact problems, take single pile and soil of a certain project for example, the normal contact between pile and soil is analyzed with 2D simplified model in horizontal load. The study shows that when adopting linear elastic model to simulate soil, the maximum contact pressure and penetration approach steady value as the contact stiffness factor increases. The reasonable value range of contact stiffness factor reduces as the underlying element thickness decreases, but the rule reverses when refers to the soil stiffness. If choose DP model to simulate soil, the stiffness factor should be magnified 100 times compares to the elastic model regardless of the soil bears small force and still in elastic deformation stage or into the plastic deformation stage. When the soil bears big force and into plastic deformation stage, the value range of stiffness factor relates to the plastic strain range of the soil, and reduces as the horizontal load increases.

Development of economical improved thick film solar cell contact

NASA Technical Reports Server (NTRS)

Ross, B.

1979-01-01

Metal screened electrodes were investigated with base metal pastes and silver systems being focused upon. Contact resistance measurements were refined. A facility allowing fixing in hydrogen and other atmospheres was acquired. Several experiments were made applying screenable pastes to solar cells. Doping investigations emphasized eutectic alloys reduced to powders. Metal systems were reviewed and base metal experiments were done with nickel and copper using lead and tin as the frit metals. Severe adhesion problems were experienced with hydrogen atmospheres in all metal systems. A two step firing schedule was devised. Aluminum-silicon and aluminum-germanium eutectic doping additions to copper pastes were tried on 2 1/4 in diameter solar cell back contacts, both with good results.

Making a Back-Illuminated Imager with Back-Side Contact and Alignment Markers

NASA Technical Reports Server (NTRS)

Pain, Bedabrata

2008-01-01

A design modification and a fabrication process that implements the modification have been conceived to solve two problems encountered in the development of back-illuminated, back-sidethinned complementary metal oxide/ semiconductor (CMOS) image-detector integrated circuits. The two problems are (1) how to form metal electrical-contact pads on the back side that are electrically connected through the thickness in proper alignment with electrical contact points on the front side and (2) how to provide alignment keys on the back side to ensure proper registration of backside optical components (e.g., microlenses and/or color filters) with the front-side pixel pattern. The essence of the design modification is to add metal plugs that extend from the desired front-side locations through the thickness and protrude from the back side of the substrate. The plugs afford the required front-to-back electrical conduction, and the protrusions of the plugs serve as both the alignment keys and the bases upon which the back-side electrical-contact pads can be formed.

Single Parenting and Child Behavior Problems in Kindergarten.

PubMed

Jackson, Aurora P; Preston, Kathleen S J; Franke, Todd M

2010-03-01

Two waves of data from a sample of 89 poor and near-poor single black mothers and their preschool children were used to study the influences of parenting stress, physical discipline practices, and nonresident fathers' relations with their children on behavior problems in kindergarten. The results indicate that higher levels of parent stress, more frequent spanking, and less frequent father-child contact at time 1 were associated with increased teacher-reported behavior problems at time 2. In addition, more frequent contact between nonresident biological fathers and their children moderated the negative effect of harsh discipline by mothers on subsequent child behavior problems. Specifically, when contact with the father was low, maternal spanking resulted in elevated levels of behavior problems; with average contact, this negative effect of spanking was muted; and with high contact, spanking was not associated with increased behavior problems in kindergarten. The implications of these findings for future research and policy are discussed.

Hand hygiene practices in a neonatal intensive care unit: a multimodal intervention and impact on nosocomial infection.

PubMed

Lam, Barbara C C; Lee, Josephine; Lau, Y L

2004-11-01

Health care-associated infections persist as a major problem in most neonatal intensive care units. Hand hygiene has been singled out as the most important measure in preventing hospital-acquired infection. However, hand hygiene compliance among health care workers (HCWs) remains low. The objective of this study was to assess the frequency and nature of patient contacts in neonatal intensive care units and observe the compliance and technique of hand hygiene among HCWs before and after the implementation of a multimodal intervention program. The nature and frequency of patient contacts, the hand hygiene compliance, and hand-washing techniques of HCWs were observed unobtrusively to reflect the baseline compliance and to investigate factors for noncompliance. The intervention consisted of problem-based and task-orientated hand hygiene education, enhancement of minimal handling protocol and clustering of nursing care, liberal provision of alcohol-based hand antiseptic, improvement in hand hygiene facilities, ongoing regular hand hygiene audit, and implementation of health care-associated infection surveillance. The observational study was repeated 6 months after the completion of the intervention program, which extended over 1-year period. Overall hand hygiene compliance increased from 40% to 53% before patient contact and 39% to 59% after patient contact. More marked improvement was observed for high-risk procedures (35%-60%). The average number of patient contacts also decreased from 2.8 to 1.8 per patient per hour. There was improvement in most aspects of hand-washing technique in the postintervention stage. The health care-associated infection rate decreased from 11.3 to 6.2 per 1000 patient-days. A problem-based and task-orientated education program can improve hand hygiene compliance. Enhancement of minimal handling and clustering of nursing procedures reduced the total patient contact episodes, which could help to overcome the major barrier of time constraints. A concurrent decrease in health care-associated infection rate and increase in hand hygiene compliance was observed in this study. The observational study could form part of an ongoing audit to provide regular feedback to HCWs to sustain the compliance.

Understanding Adult Age Differences in the Frequency of Problems With Friends.

PubMed

Schlosnagle, Leo; Strough, JoNell

2017-01-01

We investigated characteristics of younger and older adults' friendships. Younger (N = 39) and older (N = 39) adults completed measures pertaining to a specific friend they had (i.e., contact frequency, positive friendship quality, and negative friendship quality) and their frequency of problems with friends in general. Older adults reported fewer problems with friends in general, and fewer negative friendship qualities, less frequent contact, and more positive friendship qualities with a specific friend than younger adults. Contact frequency, positive friendship quality, and negative friendship quality with a specific friend were related to frequency of problems with friends in general, but only contact frequency was a significant mediator of the relation between age and frequency of problems with friends in general. Results show that characteristics of a specific friendship relate to problems with friends in general, and that contact frequency with a specific friend mediates the relation between age and problems with friends in general. Implications are discussed. © The Author(s) 2016.

Toward patient-specific articular contact mechanics

PubMed Central

Ateshian, Gerard A.; Henak, Corinne R.; Weiss, Jeffrey A.

2015-01-01

The mechanics of contacting cartilage layers is fundamentally important to understanding the development, homeostasis and pathology of diarthrodial joints. Because of the highly nonlinear nature of both the materials and the contact problem itself, numerical methods such as the finite element method are typically incorporated to obtain solutions. Over the course of five decades, we have moved from an initial qualitative understanding of articular cartilage material behavior to the ability to perform complex, three-dimensional contact analysis, including multiphasic material representations. This history includes the development of analytical and computational contact analysis methods that now provide the ability to perform highly nonlinear analyses. Numerical implementations of contact analysis based on the finite element method are rapidly advancing and will soon enable patient-specific analysis of joint contact mechanics using models based on medical image data. In addition to contact stress on the articular surfaces, these techniques can predict variations in strain and strain through the cartilage layers, providing the basis to predict damage and failure. This opens up exciting areas for future research and application to patient-specific diagnosis and treatment planning applied to a variety of pathologies that affect joint function and cartilage homeostasis. PMID:25698236

A system-approach to the elastohydrodynamic lubrication point-contact problem

NASA Technical Reports Server (NTRS)

Lim, Sang Gyu; Brewe, David E.

1991-01-01

The classical EHL (elastohydrodynamic lubrication) point contact problem is solved using a new system-approach, similar to that introduced by Houpert and Hamrock for the line-contact problem. Introducing a body-fitted coordinate system, the troublesome free-boundary is transformed to a fixed domain. The Newton-Raphson method can then be used to determine the pressure distribution and the cavitation boundary subject to the Reynolds boundary condition. This method provides an efficient and rigorous way of solving the EHL point contact problem with the aid of a supercomputer and a promising method to deal with the transient EHL point contact problem. A typical pressure distribution and film thickness profile are presented and the minimum film thicknesses are compared with the solution of Hamrock and Dowson. The details of the cavitation boundaries for various operating parameters are discussed.

Several cases of work-related allergic contact dermatitis caused by isocyanates at a company manufacturing heat exchangers.

PubMed

Engfeldt, Malin; Isaksson, Marléne; Zimerson, Erik; Bruze, Magnus

2013-03-01

A 43-year-old woman was referred by her occupational health service with suspected occupational contact dermatitis. In connection with the investigation, a workplace visit was undertaken at her company, which used an adhesive based on pre-polymeric diphenylmethane diisocyanate in one of its units. During the visit, we became aware of six other employees with skin problems who were then referred to our department for investigation. To investigate the seven employees complaining about skin problems. Seven employees were patch tested with a baseline series, an isocyanate series, and a series with work material. Five of seven patients had occupational contact allergy. Four reacted to isocyanate-related test preparations, and one to a cleanser used at the workplace. Workplace visits constitute an important part of an occupational investigation, as they might give a broader picture of the problems at a company. In this case, it was found that 5 of 100 employees currently had or had previously had occupation-related skin problems. Owing to 'healthy worker selection', some of these patients might have been missed if we had not performed a full-scale workplace visit. © 2012 John Wiley & Sons A/S.

78 FR 10642 - Service Contracts Inventory

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-14

...'' and then select ``Begin Web- based ADAMS Search.'' For problems with ADAMS, please contact the NRC's... of performance; 5. Whether the contract is a personal services contract; and 6. Whether the contract...

Elastic layer under axisymmetric indentation and surface energy effects

NASA Astrophysics Data System (ADS)

Intarit, Pong-in; Senjuntichai, Teerapong; Rungamornrat, Jaroon

2018-04-01

In this paper, a continuum-based approach is adopted to investigate the contact problem of an elastic layer with finite thickness and rigid base subjected to axisymmetric indentation with the consideration of surface energy effects. A complete Gurtin-Murdoch surface elasticity is employed to consider the influence of surface stresses. The indentation problem of a rigid frictionless punch with arbitrary axisymmetric profiles is formulated by employing the displacement Green's functions, derived with the aid of Hankel integral transform technique. The problem is solved by assuming the contact pressure distribution in terms of a linear combination of admissible functions and undetermined coefficients. Those coefficients are then obtained by employing a collocation technique and an efficient numerical quadrature scheme. The accuracy of proposed solution technique is verified by comparing with existing solutions for rigid indentation on an elastic half-space. Selected numerical results for the indenters with flat-ended cylindrical and paraboloidal punch profiles are presented to portray the influence of surface energy effects on elastic fields of the finite layer. It is found that the presence of surface stresses renders the layer stiffer, and the size-dependent behavior of elastic fields is observed in the present solutions. In addition, the surface energy effects become more pronounced with smaller contact area; thus, the influence of surface energy cannot be ignored in the analysis of indentation problem especially when the indenter size is very small such as in the case of nanoindentation.

Use of various versions of Schwarz method for solving the problem of contact interaction of elastic bodies

NASA Astrophysics Data System (ADS)

Galanin, M. P.; Lukin, V. V.; Rodin, A. S.

2018-04-01

A definition of a sufficiently common problem of mechanical contact interaction in a system of elastic bodies is given. Various versions of realization of the Schwarz method for solving the contact problem numerically are described and the results of solution of a number of problems are presented. Special attention is paid to calculations where the grids in the bodies significantly differ in steps.

A majorized Newton-CG augmented Lagrangian-based finite element method for 3D restoration of geological models

NASA Astrophysics Data System (ADS)

Tang, Peipei; Wang, Chengjing; Dai, Xiaoxia

2016-04-01

In this paper, we propose a majorized Newton-CG augmented Lagrangian-based finite element method for 3D elastic frictionless contact problems. In this scheme, we discretize the restoration problem via the finite element method and reformulate it to a constrained optimization problem. Then we apply the majorized Newton-CG augmented Lagrangian method to solve the optimization problem, which is very suitable for the ill-conditioned case. Numerical results demonstrate that the proposed method is a very efficient algorithm for various large-scale 3D restorations of geological models, especially for the restoration of geological models with complicated faults.

Inverse problems and optimal experiment design in unsteady heat transfer processes identification

NASA Technical Reports Server (NTRS)

Artyukhin, Eugene A.

1991-01-01

Experimental-computational methods for estimating characteristics of unsteady heat transfer processes are analyzed. The methods are based on the principles of distributed parameter system identification. The theoretical basis of such methods is the numerical solution of nonlinear ill-posed inverse heat transfer problems and optimal experiment design problems. Numerical techniques for solving problems are briefly reviewed. The results of the practical application of identification methods are demonstrated when estimating effective thermophysical characteristics of composite materials and thermal contact resistance in two-layer systems.

Surrogate modeling of deformable joint contact using artificial neural networks.

PubMed

Eskinazi, Ilan; Fregly, Benjamin J

2015-09-01

Deformable joint contact models can be used to estimate loading conditions for cartilage-cartilage, implant-implant, human-orthotic, and foot-ground interactions. However, contact evaluations are often so expensive computationally that they can be prohibitive for simulations or optimizations requiring thousands or even millions of contact evaluations. To overcome this limitation, we developed a novel surrogate contact modeling method based on artificial neural networks (ANNs). The method uses special sampling techniques to gather input-output data points from an original (slow) contact model in multiple domains of input space, where each domain represents a different physical situation likely to be encountered. For each contact force and torque output by the original contact model, a multi-layer feed-forward ANN is defined, trained, and incorporated into a surrogate contact model. As an evaluation problem, we created an ANN-based surrogate contact model of an artificial tibiofemoral joint using over 75,000 evaluations of a fine-grid elastic foundation (EF) contact model. The surrogate contact model computed contact forces and torques about 1000 times faster than a less accurate coarse grid EF contact model. Furthermore, the surrogate contact model was seven times more accurate than the coarse grid EF contact model within the input domain of a walking motion. For larger input domains, the surrogate contact model showed the expected trend of increasing error with increasing domain size. In addition, the surrogate contact model was able to identify out-of-contact situations with high accuracy. Computational contact models created using our proposed ANN approach may remove an important computational bottleneck from musculoskeletal simulations or optimizations incorporating deformable joint contact models. Copyright © 2015 IPEM. Published by Elsevier Ltd. All rights reserved.

Surrogate Modeling of Deformable Joint Contact using Artificial Neural Networks

PubMed Central

Eskinazi, Ilan; Fregly, Benjamin J.

2016-01-01

Deformable joint contact models can be used to estimate loading conditions for cartilage-cartilage, implant-implant, human-orthotic, and foot-ground interactions. However, contact evaluations are often so expensive computationally that they can be prohibitive for simulations or optimizations requiring thousands or even millions of contact evaluations. To overcome this limitation, we developed a novel surrogate contact modeling method based on artificial neural networks (ANNs). The method uses special sampling techniques to gather input-output data points from an original (slow) contact model in multiple domains of input space, where each domain represents a different physical situation likely to be encountered. For each contact force and torque output by the original contact model, a multi-layer feed-forward ANN is defined, trained, and incorporated into a surrogate contact model. As an evaluation problem, we created an ANN-based surrogate contact model of an artificial tibiofemoral joint using over 75,000 evaluations of a fine-grid elastic foundation (EF) contact model. The surrogate contact model computed contact forces and torques about 1000 times faster than a less accurate coarse grid EF contact model. Furthermore, the surrogate contact model was seven times more accurate than the coarse grid EF contact model within the input domain of a walking motion. For larger input domains, the surrogate contact model showed the expected trend of increasing error with increasing domain size. In addition, the surrogate contact model was able to identify out-of-contact situations with high accuracy. Computational contact models created using our proposed ANN approach may remove an important computational bottleneck from musculoskeletal simulations or optimizations incorporating deformable joint contact models. PMID:26220591

Profiles of behavioral problems in children who witness domestic violence.

PubMed

Spilsbury, James C; Kahana, Shoshana; Drotar, Dennis; Creeden, Rosemary; Flannery, Daniel J; Friedman, Steve

2008-01-01

Unlike previous investigations of shelter-based samples, our study examined whether profiles of adjustment problems occurred in a community-program-based sample of 175 school-aged children exposed to domestic violence. Cluster analysis revealed three stable profiles/clusters. The largest cluster (69%) consisted of children below clinical thresholds for any internalizing or externalizing problem. Children in the next largest cluster (18%) were characterized as having externalizing problems with or without internalizing problems. The smallest cluster (13%) consisted of children with internalizing problems only. Comparison across demographic and violence characteristics revealed that the profiles differed by child gender, mother's education, child's lifetime exposure to violence, and aspects of the event precipitating contact with the community program. Clinical and future research implications of study findings are discussed.

Micro-Structural Study of Fretting Contact Caused by the Difference of the Tin Plating Thickness

NASA Astrophysics Data System (ADS)

Ito, Tetsuya; Sawada, Shigeru; Hattori, Yasuhiro; Saitoh, Yasushi; Tamai, Terutaka; Iida, Kazuo

In recent years, there has been increasing demand to miniaturize wiring harness connectors in automobiles due to the increasing volume of electronic equipment and the reduction of the installation space allocated for the electronic equipment in automobiles for the comfort of the passengers. With this demand, contact failure caused by the fretting corrosion is expected to become a serious problem. In this report, we examined micro-structural observations of fretting contacts of two different tin plating thicknesses using Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) and so on. Based on the results, we compared the microstructure difference of fretting contact caused by the difference of the tin plating thickness.

Mass social contact interventions and their effect on mental health related stigma and intended discrimination.

PubMed

Evans-Lacko, Sara; London, Jillian; Japhet, Sarah; Rüsch, Nicolas; Flach, Clare; Corker, Elizabeth; Henderson, Claire; Thornicroft, Graham

2012-06-28

Stigma and discrimination associated with mental health problems is an important public health issue, and interventions aimed at reducing exposure to stigma and discrimination can improve the lives of people with mental health problems. Social contact has long been considered to be one of the most effective strategies for improving inter-group relations. For this study, we assess the impact of a population level social contact intervention among people with and without mental health problems. This study investigated the impact of social contact and whether presence of specific facilitating factors (equal status, common goals, cooperation and friendship potential): (1) improves intended stigmatising behaviour; (2) increases future willingness to disclose a mental health problem; and (3) promotes behaviours associated with anti-stigma campaign engagement. Two mass participation social contact programmes within England's Time to Change campaign were evaluated via a 2-part questionnaire. 403 participants completed initial questionnaires (70% paper, 30% online) and 83 completed follow-up questionnaires online 4-6 weeks later. This study investigated the impact of social contact and whether presence of specific facilitating factors (equal status, common goals, cooperation and friendship potential): (1) improves intended stigmatising behaviour; (2) increases future willingness to disclose a mental health problem; and (3) promotes behaviours associated with anti-stigma campaign engagement. Two mass participation social contact programmes within England's Time to Change campaign were evaluated via a 2-part questionnaire. 403 participants completed initial questionnaires (70% paper, 30% online) and 83 completed follow-up questionnaires online 4-6 weeks later. Campaign events facilitated meaningful intergroup social contact between individuals with and without mental health problems. Presence of facilitating conditions predicted improved stigma-related behavioural intentions and subsequent campaign engagement 4-6 weeks following social contact. Contact, however, was not predictive of future willingness to disclose mental health problems. Findings emphasise the importance of facilitating conditions to promote positive social contact between individuals and also suggest that social contact interventions can work on a mass level. Future research should investigate this type of large scale intervention among broader and more representative populations.

Mass social contact interventions and their effect on mental health related stigma and intended discrimination

PubMed Central

2012-01-01

Background Stigma and discrimination associated with mental health problems is an important public health issue, and interventions aimed at reducing exposure to stigma and discrimination can improve the lives of people with mental health problems. Social contact has long been considered to be one of the most effective strategies for improving inter-group relations. For this study, we assess the impact of a population level social contact intervention among people with and without mental health problems. Methods This study investigated the impact of social contact and whether presence of specific facilitating factors (equal status, common goals, cooperation and friendship potential): (1) improves intended stigmatising behaviour; (2) increases future willingness to disclose a mental health problem; and (3) promotes behaviours associated with anti-stigma campaign engagement. Two mass participation social contact programmes within England’s Time to Change campaign were evaluated via a 2-part questionnaire. 403 participants completed initial questionnaires (70% paper, 30% online) and 83 completed follow-up questionnaires online 4–6 weeks later. Results This study investigated the impact of social contact and whether presence of specific facilitating factors (equal status, common goals, cooperation and friendship potential): (1) improves intended stigmatising behaviour; (2) increases future willingness to disclose a mental health problem; and (3) promotes behaviours associated with anti-stigma campaign engagement. Two mass participation social contact programmes within England’s Time to Change campaign were evaluated via a 2-part questionnaire. 403 participants completed initial questionnaires (70% paper, 30% online) and 83 completed follow-up questionnaires online 4–6 weeks later. Campaign events facilitated meaningful intergroup social contact between individuals with and without mental health problems. Presence of facilitating conditions predicted improved stigma-related behavioural intentions and subsequent campaign engagement 4–6 weeks following social contact. Contact, however, was not predictive of future willingness to disclose mental health problems. Conclusions Findings emphasise the importance of facilitating conditions to promote positive social contact between individuals and also suggest that social contact interventions can work on a mass level. Future research should investigate this type of large scale intervention among broader and more representative populations. PMID:22742085

Contacts with out-of-hours primary care for nonurgent problems: patients' beliefs or deficiencies in healthcare?

PubMed

Keizer, Ellen; Smits, Marleen; Peters, Yvonne; Huibers, Linda; Giesen, Paul; Wensing, Michel

2015-10-28

In the Netherlands, about half of the patient contacts with a general practitioner (GP) cooperative are nonurgent from a medical perspective. A part of these problems can wait until office hours or can be managed by the patient himself without further professional care. However, from the patient's perspective, there may be a need to contact a physician immediately. Our objective was to determine whether contacts with out-of-hours primary care made by patients with nonurgent problems are the result of patients' beliefs or of deficiencies in the healthcare system. We performed a survey among 2000 patients with nonurgent health problems in four GP cooperatives in the Netherlands. Two GPs independently judged the medical necessity of the contacts of all patients in this study. We examined characteristics, views and motives of patients with medically necessary contacts and those without medically necessary contacts. Descriptive statistics were used to describe the characteristics, views and reasons of the patients with medically unnecessary contacts and medically necessary contacts. Differences between these groups were tested with chi-square tests. The response rate was 32.3 % (N = 646). Of the nonurgent contacts 30.4 % were judged as medically necessary (95 % CI 27.0-34.2). Compared to patients with nonurgent but medically necessary contacts, patients with medically unnecessary contacts were younger and were more often frequent attenders. They had longer-existing problems, lower self-assessed urgency, and more often believed GP cooperatives are intended for all help requests. Worry was the most frequently mentioned motive for contacting a GP cooperative for patients with a medically unnecessary contact (45.3 %) and a perceived need to see a GP for patients with a medically necessary contact (44.2 %). Perceived availability (5.8 %) and accessibility (8.3 %) of a patient's own GP played a role for some patients. Motives for contacting a GP cooperative are mostly patient-related, but also deficiencies in access to general practice may partly explain medically unnecessary use. Efforts to change the use of GP cooperatives should focus on education of subgroups with an increased likelihood of contact for medically unnecessary problems. Improvement of access to daytime primary care may also decrease use of the GP cooperative.

An approximate JKR solution for a general contact, including rough contacts

NASA Astrophysics Data System (ADS)

Ciavarella, M.

2018-05-01

In the present note, we suggest a simple closed form approximate solution to the adhesive contact problem under the so-called JKR regime. The derivation is based on generalizing the original JKR energetic derivation assuming calculation of the strain energy in adhesiveless contact, and unloading at constant contact area. The underlying assumption is that the contact area distributions are the same as under adhesiveless conditions (for an appropriately increased normal load), so that in general the stress intensity factors will not be exactly equal at all contact edges. The solution is simply that the indentation is δ =δ1 -√{ 2 wA‧ /P″ } where w is surface energy, δ1 is the adhesiveless indentation, A‧ is the first derivative of contact area and P‧‧ the second derivative of the load with respect to δ1. The solution only requires macroscopic quantities, and not very elaborate local distributions, and is exact in many configurations like axisymmetric contacts, but also sinusoidal waves contact and correctly predicts some features of an ideal asperity model used as a test case and not as a real description of a rough contact problem. The solution permits therefore an estimate of the full solution for elastic rough solids with Gaussian multiple scales of roughness, which so far was lacking, using known adhesiveless simple results. The result turns out to depend only on rms amplitude and slopes of the surface, and as in the fractal limit, slopes would grow without limit, tends to the adhesiveless result - although in this limit the JKR model is inappropriate. The solution would also go to adhesiveless result for large rms amplitude of roughness hrms, irrespective of the small scale details, and in agreement with common sense, well known experiments and previous models by the author.

Droplets move over viscoelastic substrates by surfing a ridge

PubMed Central

Karpitschka, S.; Das, S.; van Gorcum, M.; Perrin, H.; Andreotti, B.; Snoeijer, J. H.

2015-01-01

Liquid drops on soft solids generate strong deformations below the contact line, resulting from a balance of capillary and elastic forces. The movement of these drops may cause strong, potentially singular dissipation in the soft solid. Here we show that a drop on a soft substrate moves by surfing a ridge: the initially flat solid surface is deformed into a sharp ridge whose orientation angle depends on the contact line velocity. We measure this angle for water on a silicone gel and develop a theory based on the substrate rheology. We quantitatively recover the dynamic contact angle and provide a mechanism for stick–slip motion when a drop is forced strongly: the contact line depins and slides down the wetting ridge, forming a new one after a transient. We anticipate that our theory will have implications in problems such as self-organization of cell tissues or the design of capillarity-based microrheometers. PMID:26238436

Contact dermatitis is an unrecognized problem in the construction industry: Comparison of four different assessment methods.

PubMed

Timmerman, Johan G; Heederik, Dick; Spee, Ton; van Rooy, Frits G; Krop, Esmeralda J M; Rustemeyer, Thomas; Smit, Lidwien A M

2017-10-01

A high contact dermatitis symptoms prevalence has been observed in Dutch construction workers. Contact dermatitis was diagnosed by an expert panel using questionnaire data and photographs of 751 subjects' hands. A subset was evaluated by two occupational physicians. Their diagnoses were compared to those of the expert panel. In addition, two self-reported questionnaire-based assessment methods were compared to the expert panel evaluation. Associations between contact dermatitis and determinants were assessed using log-binomial regression analysis. Contact dermatitis prevalence was high: 61.4% (expert panel's diagnosis) and 32.9% (self-reported). Agreement between occupational physicians and the expert panel was low but increased after training. Washing hands with solvents and performing job-related tasks at home were related to contact dermatitis. Contact dermatitis prevalence among construction workers is high. Recognition of contact dermatitis by occupational physicians is poor but can be improved by training. Awareness of skin disorders should be raised. © 2017 Wiley Periodicals, Inc.

Effect of different atmospheres on the electrical contact performance of electronic components under fretting wear

NASA Astrophysics Data System (ADS)

Liu, Xin-Long; Cai, Zhen-Bing; Cui, Ye; Liu, Shan-Bang; Xu, Xiao-Jun; Zhu, Min-Hao

2018-04-01

The effects of oxide etch on the surface morphology of metals for industrial application is a common cause of electrical contacts failure, and it has becomes a more severe problem with the miniaturization of modern electronic devices. This study investigated the effects of electrical contact resistance on the contactor under three different atmospheres (oxygen, air, and nitrogen) based on 99.9% copper/pogo pins contacts through fretting experiments. The results showed the minimum and stable electrical contact resistance value when shrouded in the nitrogen environment and with high friction coefficient. The rich oxygen environment promotes the formation of cuprous oxide, thereby the electrical contact resistance increases. Scanning electron microscope microscopy and electron probe microanalysis were used to analyze the morphology and distribution of elements of the wear area, respectively. The surface product between contacts was investigated by x-ray photoelectron spectroscopy analysis to explain the different electrical contact properties of the three tested samples during fretting.

Emotional/Behavioral difficulties and mental health service contacts of students in special education for non-mental health problems.

PubMed

Pastor, Patricia N; Reuben, Cynthia A

2009-02-01

Emotional/behavioral difficulties and mental health (MH) service contacts of 3 groups of youth were compared: students in special education for non-MH problems, students in special education for MH problems, and youth not in special education. Parents reported the characteristics, special education placement, emotional/behavioral difficulties, and MH service contacts of 25,122 youth aged 6-17 years in the National Health Interview Survey. Two thirds of students in special education received special education services for non-MH problems. Among students in special education for non-MH problems, 17% had serious emotional/behavioral difficulties compared with 51% of students in special education for MH problems and 4% of youth not in special education. MH service contacts were examined only for youth whose difficulties significantly interfered with their ability to function in or out of school. Among youth with serious difficulties, the percentage of youth without a recent MH service contact was greater for students in special education for non-MH problems (40%) and youth not in special education (47%) compared with students in special education for MH problems (13%). Compared with youth not in special education, students in special education for non-MH problems were 4 times more likely to have serious emotional/behavioral difficulties but were just as likely as youth not in special education to lack a recent MH service contact. Study findings provide a national context for considering the MH screening/evaluation needs of students receiving special education for non-MH problems.

Scalable Effective Approaches for Quadratic Assignment Problems Based on Conic Optimization and Applications

DTIC Science & Technology

2012-02-09

1nclud1ng suggestions for reduc1ng the burden. to the Department of Defense. ExecutiVe Serv1ce D>rectorate (0704-0188) Respondents should be aware...benchmark problem we contacted Bertrand LeCun who in their poject CHOC from 2005-2008 had applied their parallel B&B framework BOB++ to the RLT1

Direct Numerical Simulation of Fingering Instabilities in Coating Flows

NASA Astrophysics Data System (ADS)

Eres, Murat H.; Schwartz, Leonard W.

1998-11-01

We consider stability and finger formation in free surface flows. Gravity driven downhill drainage and temperature gradient driven climbing flows are two examples of such problems. The former situation occurs when a mound of viscous liquid on a vertical wall is allowed to flow. Constant surface shear stress due to temperature gradients (Marangoni stress) can initiate the latter problem. The evolution equations are derived using the lubrication approximation. We also include the effects of finite-contact angles in the evolution equations using a disjoining pressure model. Evolution equations for both problems are solved using an efficient alternating-direction-implicit method. For both problems a one-dimensional base state is established, that is steady in a moving reference frame. This base state is unstable to transverse perturbations. The transverse wavenumbers for the most rapidly growing modes are found through direct numerical solution of the nonlinear evolution equations, and are compared with published experimental results. For a range of finite equilibrium contact angles, the fingers can grow without limit leading to semi-finite steady fingers in a moving coordinate system. A computer generated movie of the nonlinear simulation results, for several sets of input parameters, will be shown.

Predicting protein β-sheet contacts using a maximum entropy-based correlated mutation measure.

PubMed

Burkoff, Nikolas S; Várnai, Csilla; Wild, David L

2013-03-01

The problem of ab initio protein folding is one of the most difficult in modern computational biology. The prediction of residue contacts within a protein provides a more tractable immediate step. Recently introduced maximum entropy-based correlated mutation measures (CMMs), such as direct information, have been successful in predicting residue contacts. However, most correlated mutation studies focus on proteins that have large good-quality multiple sequence alignments (MSA) because the power of correlated mutation analysis falls as the size of the MSA decreases. However, even with small autogenerated MSAs, maximum entropy-based CMMs contain information. To make use of this information, in this article, we focus not on general residue contacts but contacts between residues in β-sheets. The strong constraints and prior knowledge associated with β-contacts are ideally suited for prediction using a method that incorporates an often noisy CMM. Using contrastive divergence, a statistical machine learning technique, we have calculated a maximum entropy-based CMM. We have integrated this measure with a new probabilistic model for β-contact prediction, which is used to predict both residue- and strand-level contacts. Using our model on a standard non-redundant dataset, we significantly outperform a 2D recurrent neural network architecture, achieving a 5% improvement in true positives at the 5% false-positive rate at the residue level. At the strand level, our approach is competitive with the state-of-the-art single methods achieving precision of 61.0% and recall of 55.4%, while not requiring residue solvent accessibility as an input. http://www2.warwick.ac.uk/fac/sci/systemsbiology/research/software/

Modeling of fatigue crack induced nonlinear ultrasonics using a highly parallelized explicit local interaction simulation approach

NASA Astrophysics Data System (ADS)

Shen, Yanfeng; Cesnik, Carlos E. S.

2016-04-01

This paper presents a parallelized modeling technique for the efficient simulation of nonlinear ultrasonics introduced by the wave interaction with fatigue cracks. The elastodynamic wave equations with contact effects are formulated using an explicit Local Interaction Simulation Approach (LISA). The LISA formulation is extended to capture the contact-impact phenomena during the wave damage interaction based on the penalty method. A Coulomb friction model is integrated into the computation procedure to capture the stick-slip contact shear motion. The LISA procedure is coded using the Compute Unified Device Architecture (CUDA), which enables the highly parallelized supercomputing on powerful graphic cards. Both the explicit contact formulation and the parallel feature facilitates LISA's superb computational efficiency over the conventional finite element method (FEM). The theoretical formulations based on the penalty method is introduced and a guideline for the proper choice of the contact stiffness is given. The convergence behavior of the solution under various contact stiffness values is examined. A numerical benchmark problem is used to investigate the new LISA formulation and results are compared with a conventional contact finite element solution. Various nonlinear ultrasonic phenomena are successfully captured using this contact LISA formulation, including the generation of nonlinear higher harmonic responses. Nonlinear mode conversion of guided waves at fatigue cracks is also studied.

Glasses and Contact Lenses

MedlinePlus

... vision problems; this includes prescribing eyeglasses and contact lenses, but also doing eye surgery for other eye-related problems. An optometrist ... them clean. The most important thing about contact lenses is good hygiene to prevent infections in your eye. But the really fun part of new glasses ...

Joint Geophysical Inversion With Multi-Objective Global Optimization Methods

NASA Astrophysics Data System (ADS)

Lelievre, P. G.; Bijani, R.; Farquharson, C. G.

2015-12-01

Pareto multi-objective global optimization (PMOGO) methods generate a suite of solutions that minimize multiple objectives (e.g. data misfits and regularization terms) in a Pareto-optimal sense. Providing a suite of models, as opposed to a single model that minimizes a weighted sum of objectives, allows a more complete assessment of the possibilities and avoids the often difficult choice of how to weight each objective. We are applying PMOGO methods to three classes of inverse problems. The first class are standard mesh-based problems where the physical property values in each cell are treated as continuous variables. The second class of problems are also mesh-based but cells can only take discrete physical property values corresponding to known or assumed rock units. In the third class we consider a fundamentally different type of inversion in which a model comprises wireframe surfaces representing contacts between rock units; the physical properties of each rock unit remain fixed while the inversion controls the position of the contact surfaces via control nodes. This third class of problem is essentially a geometry inversion, which can be used to recover the unknown geometry of a target body or to investigate the viability of a proposed Earth model. Joint inversion is greatly simplified for the latter two problem classes because no additional mathematical coupling measure is required in the objective function. PMOGO methods can solve numerically complicated problems that could not be solved with standard descent-based local minimization methods. This includes the latter two classes of problems mentioned above. There are significant increases in the computational requirements when PMOGO methods are used but these can be ameliorated using parallelization and problem dimension reduction strategies.

Statistical potential-based amino acid similarity matrices for aligning distantly related protein sequences.

PubMed

Tan, Yen Hock; Huang, He; Kihara, Daisuke

2006-08-15

Aligning distantly related protein sequences is a long-standing problem in bioinformatics, and a key for successful protein structure prediction. Its importance is increasing recently in the context of structural genomics projects because more and more experimentally solved structures are available as templates for protein structure modeling. Toward this end, recent structure prediction methods employ profile-profile alignments, and various ways of aligning two profiles have been developed. More fundamentally, a better amino acid similarity matrix can improve a profile itself; thereby resulting in more accurate profile-profile alignments. Here we have developed novel amino acid similarity matrices from knowledge-based amino acid contact potentials. Contact potentials are used because the contact propensity to the other amino acids would be one of the most conserved features of each position of a protein structure. The derived amino acid similarity matrices are tested on benchmark alignments at three different levels, namely, the family, the superfamily, and the fold level. Compared to BLOSUM45 and the other existing matrices, the contact potential-based matrices perform comparably in the family level alignments, but clearly outperform in the fold level alignments. The contact potential-based matrices perform even better when suboptimal alignments are considered. Comparing the matrices themselves with each other revealed that the contact potential-based matrices are very different from BLOSUM45 and the other matrices, indicating that they are located in a different basin in the amino acid similarity matrix space.

Boundary element method for normal non-adhesive and adhesive contacts of power-law graded elastic materials

NASA Astrophysics Data System (ADS)

Li, Qiang; Popov, Valentin L.

2018-03-01

Recently proposed formulation of the boundary element method for adhesive contacts has been generalized for contacts of power-law graded materials with and without adhesion. Proceeding from the fundamental solution for single force acting on the surface of an elastic half space, first the influence matrix is obtained for a rectangular grid. The inverse problem for the calculation of required stress in the contact area from a known surface displacement is solved using the conjugate-gradient technique. For the transformation between the stresses and displacements, the Fast Fourier Transformation is used. For the adhesive contact of graded material, the detachment criterion based on the energy balance is proposed. The method is validated by comparison with known exact analytical solutions as well as by proving the independence of the mesh size and the grid orientation.

Model Development and Model-Based Control Design for High Performance Nonlinear Smart Systems

DTIC Science & Technology

2007-11-20

potentially impact a broad range of flow control problems of interest to the Air Force and Boeing. Point of contact: James Mabe , Boeing Phantom Works...rotorcraft blades. In both cases, models and control designs will be validated using data from Boeing experiments and flight tests. Point of contact: James ... Mabe , Boeing Phantom Works, Seattle, WA, 206-655-0091. 3. PZT Unimorphs – Boeing: Nonlinear structural models developed through AFOSR support are being

Fracture and contact problems for an elastic wedge

NASA Technical Reports Server (NTRS)

Erdogan, F.; Arin, K.

1974-01-01

The plane elastostatic contact problem for an infinite elastic wedge of arbitrary angle is discussed. The medium is loaded through a frictionless rigid wedge of a given symmetric profile. Using the Mellin transform formulation the mixed boundary value problem is reduced to a singular integral equation with the contact stress as the unknown function. With the application of the results to the fracture of the medium in mind, the main emphasis in the study has been on the investigation of the singular nature of the stress state around the apex of the wedge and on the determination of the contact pressure.

Fracture and contact problems for an elastic wedge

NASA Technical Reports Server (NTRS)

Erdogan, F.; Arin, K.

1976-01-01

The paper deals with the plane elastostatic contact problem for an infinite elastic wedge of arbitrary angle. The medium is loaded through a frictionless rigid wedge of a given symmetric profile. Using the Mellin transform formulation the mixed boundary value problem is reduced to a singular integral equation with the contact stress as the unknown function. With the application of the results to the fracture of the medium in mind, the main emphasis in the study has been on the investigation of the singular nature of the stress state around the apex of the wedge and on the determination of the contact pressure.

Comparison of optical and electrical measurements of the pantograph-catenary contact force

NASA Astrophysics Data System (ADS)

Bocciolone, Marco; Bucca, Giuseppe; Collina, Andrea; Comolli, Lorenzo

2010-09-01

In railway engineering the monitoring of contact force between pantograph and catenary gives information about the interaction between the two systems and it is useful to check the status of the overhead line. Indeed the failure of the catenary is one of the main causes of out of order problems. This study was conducted in a test campaign on an underground train instrumented with sensors able to monitor the line status. One of the more important measured quantities is the pantograph contact force, and two measurement systems were implemented: one optical and another electrical. The optical one was based on FBG sensors applied on the pantograph collector strip; the electrical one was based on two load cells positioned at the sides of the collector strip. The in-line measurements show that the optical solution is very promising, providing very reliable results that can be successfully used in the monitoring application, allowing the determination of the critical point in the line. The thermal compensation of any FBG sensors is a known problem and here is no exception: a thermal compensator was used to get also mean value measurements and the results are discussed.

Contact-free palm-vein recognition based on local invariant features.

PubMed

Kang, Wenxiong; Liu, Yang; Wu, Qiuxia; Yue, Xishun

2014-01-01

Contact-free palm-vein recognition is one of the most challenging and promising areas in hand biometrics. In view of the existing problems in contact-free palm-vein imaging, including projection transformation, uneven illumination and difficulty in extracting exact ROIs, this paper presents a novel recognition approach for contact-free palm-vein recognition that performs feature extraction and matching on all vein textures distributed over the palm surface, including finger veins and palm veins, to minimize the loss of feature information. First, a hierarchical enhancement algorithm, which combines a DOG filter and histogram equalization, is adopted to alleviate uneven illumination and to highlight vein textures. Second, RootSIFT, a more stable local invariant feature extraction method in comparison to SIFT, is adopted to overcome the projection transformation in contact-free mode. Subsequently, a novel hierarchical mismatching removal algorithm based on neighborhood searching and LBP histograms is adopted to improve the accuracy of feature matching. Finally, we rigorously evaluated the proposed approach using two different databases and obtained 0.996% and 3.112% Equal Error Rates (EERs), respectively, which demonstrate the effectiveness of the proposed approach.

Contact-Free Palm-Vein Recognition Based on Local Invariant Features

PubMed Central

Kang, Wenxiong; Liu, Yang; Wu, Qiuxia; Yue, Xishun

2014-01-01

Contact-free palm-vein recognition is one of the most challenging and promising areas in hand biometrics. In view of the existing problems in contact-free palm-vein imaging, including projection transformation, uneven illumination and difficulty in extracting exact ROIs, this paper presents a novel recognition approach for contact-free palm-vein recognition that performs feature extraction and matching on all vein textures distributed over the palm surface, including finger veins and palm veins, to minimize the loss of feature information. First, a hierarchical enhancement algorithm, which combines a DOG filter and histogram equalization, is adopted to alleviate uneven illumination and to highlight vein textures. Second, RootSIFT, a more stable local invariant feature extraction method in comparison to SIFT, is adopted to overcome the projection transformation in contact-free mode. Subsequently, a novel hierarchical mismatching removal algorithm based on neighborhood searching and LBP histograms is adopted to improve the accuracy of feature matching. Finally, we rigorously evaluated the proposed approach using two different databases and obtained 0.996% and 3.112% Equal Error Rates (EERs), respectively, which demonstrate the effectiveness of the proposed approach. PMID:24866176

Clustering biomolecular complexes by residue contacts similarity.

PubMed

Rodrigues, João P G L M; Trellet, Mikaël; Schmitz, Christophe; Kastritis, Panagiotis; Karaca, Ezgi; Melquiond, Adrien S J; Bonvin, Alexandre M J J

2012-07-01

Inaccuracies in computational molecular modeling methods are often counterweighed by brute-force generation of a plethora of putative solutions. These are then typically sieved via structural clustering based on similarity measures such as the root mean square deviation (RMSD) of atomic positions. Albeit widely used, these measures suffer from several theoretical and technical limitations (e.g., choice of regions for fitting) that impair their application in multicomponent systems (N > 2), large-scale studies (e.g., interactomes), and other time-critical scenarios. We present here a simple similarity measure for structural clustering based on atomic contacts--the fraction of common contacts--and compare it with the most used similarity measure of the protein docking community--interface backbone RMSD. We show that this method produces very compact clusters in remarkably short time when applied to a collection of binary and multicomponent protein-protein and protein-DNA complexes. Furthermore, it allows easy clustering of similar conformations of multicomponent symmetrical assemblies in which chain permutations can occur. Simple contact-based metrics should be applicable to other structural biology clustering problems, in particular for time-critical or large-scale endeavors. Copyright © 2012 Wiley Periodicals, Inc.

An interior-point method-based solver for simulation of aircraft parts riveting

NASA Astrophysics Data System (ADS)

Stefanova, Maria; Yakunin, Sergey; Petukhova, Margarita; Lupuleac, Sergey; Kokkolaras, Michael

2018-05-01

The particularities of the aircraft parts riveting process simulation necessitate the solution of a large amount of contact problems. A primal-dual interior-point method-based solver is proposed for solving such problems efficiently. The proposed method features a worst case polynomial complexity bound ? on the number of iterations, where n is the dimension of the problem and ε is a threshold related to desired accuracy. In practice, the convergence is often faster than this worst case bound, which makes the method applicable to large-scale problems. The computational challenge is solving the system of linear equations because the associated matrix is ill conditioned. To that end, the authors introduce a preconditioner and a strategy for determining effective initial guesses based on the physics of the problem. Numerical results are compared with ones obtained using the Goldfarb-Idnani algorithm. The results demonstrate the efficiency of the proposed method.

Employees with mental health problems: Survey of U.K. employers' knowledge, attitudes and workplace practices.

PubMed

Brohan, Elaine; Henderson, Claire; Little, Kirsty; Thornicroft, Graham

2010-01-01

To investigate whether employers who have experience of hiring people with mental health problems differ significantly from those without such experience in terms of knowledge, attitudes and behaviours regarding mental health in the workplace, and the concerns which they report about employing people with mental health problems. We also examine whether non-workplace social contact is associated with the above variables. A telephone survey was conducted with a randomly selected sample of British employers. The sample included a similar number of human resource managers and managers/executive employees in other roles. 502 employers took part. Having employed someone with a mental health problem was associated with closer non-workplace social contact. Those with experience of employing applicants with mental health problems had significant differences in knowledge (regarding the law), and behaviour (having a policy on hiring applicants with disabilities) but not in attitudes. Non-workplace social contact may be useful to consider in understanding hiring practices. The nature of social contact at work and possible lack of impact of this contact on employer attitudes and concerns warrants further study. Greater support is needed for employers to understand the law regarding mental health problems in the workplace.

[Disinfecting contact tonometers - a systematic review].

PubMed

Neubauer, A S; Heeg, P; Kampik, A; Hirneiss, C

2009-05-01

The aim of this study is to provide the best available evidence on how to disinfect contact Goldman tonometers. A systematic review of all articles on disinfection of contact tonometers was conducted. Articles published up to July 2008 were identified in Medline, Embase and references from included articles. Two observers participated in the data retrieval and assessment of the studies identified. A total of 89 articles was retrieved, of which 58 could be included. Of those, 18 were clinical studies, 17 experimental microbiological studies, 8 expert assessments or guidelines and 15 reviews, surveys, descriptions of new methods. The clinical studies illustrate the importance of the problem, possible side effects of some disinfection methods but yield inconclusive results regarding efficacy. Experimental studies investigated a variety of bacterial and virological questions as well as material damage by disinfection. Both chlorine-based and hydrogen peroxide-based liquid disinfection were shown to be effective if applied for 5 min. Inconsistent results exist for alcohol wipes and UV disinfection - material damage has been described for both. The US guidelines and most expert recommendations are supported by evidence of the existing data. Chlorine-based and hydrogen peroxide-based liquid disinfections for 5 minutes are effective and relatively safe for disinfecting contact tonometers.

Longer Eye Contact Improves ADHD Children's Compliance with Parents' Commands

ERIC Educational Resources Information Center

Kapalka, G. M.

2004-01-01

This study evaluated the effectiveness of eye contact in reducing ADHD children's problems with compliance. Seventy-six parents of ADHD boys between ages 5 and 10 were randomized into two treatment groups and a control group. Repeated-measures ANOVA revealed that, as hypothesized, eye contact was effective in reducing ADHD children's problems with…

Sexual Identity, Sex of Sexual Contacts, and Health-Risk Behaviors among Students in Grades 9-12--Youth Risk Behavior Surveillance, Selected Sites, United States, 2001-2009. Morbidity and Mortality Weekly Report. Early Release. Volume 60

ERIC Educational Resources Information Center

Kann, Laura; O'Malley Olsen, Emily; McManus, Tim; Kinchen, Steve; Chyen, David; Harris, William A.; Wechsler, Howell

2011-01-01

Problem: Sexual minority youths are youths who identify themselves as gay or lesbian, bisexual, or unsure of their sexual identity or youths who have only had sexual contact with persons of the same sex or with both sexes. Population-based data on the health-risk behaviors practiced by sexual minority youths are needed at the state and local…

From the Nano- to the Macroscale - Bridging Scales for the Moving Contact Line Problem

NASA Astrophysics Data System (ADS)

Nold, Andreas; Sibley, David; Goddard, Benjamin; Kalliadasis, Serafim; Complex Multiscale Systems Team

2016-11-01

The moving contact line problem remains an unsolved fundamental problem in fluid mechanics. At the heart of the problem is its multiscale nature: a nanoscale region close to the solid boundary where the continuum hypothesis breaks down, must be resolved before effective macroscale parameters such as contact line friction and slip can be obtained. To capture nanoscale properties very close to the contact line and to establish a link to the macroscale behaviour, we employ classical density-functional theory (DFT), in combination with extended Navier-Stokes-like equations. Using simple models for viscosity and slip at the wall, we compare our computations with the Molecular Kinetic Theory, by extracting the contact line friction, depending on the imposed temperature of the fluid. A key fluid property captured by DFT is the fluid layering at the wall-fluid interface, which has a large effect on the shearing properties of a fluid. To capture this crucial property, we propose an anisotropic model for the viscosity, which also allows us to scrutinize the effect of fluid layering on contact line friction.

Wetting boundary condition for the color-gradient lattice Boltzmann method: Validation with analytical and experimental data

NASA Astrophysics Data System (ADS)

Akai, Takashi; Bijeljic, Branko; Blunt, Martin J.

2018-06-01

In the color gradient lattice Boltzmann model (CG-LBM), a fictitious-density wetting boundary condition has been widely used because of its ease of implementation. However, as we show, this may lead to inaccurate results in some cases. In this paper, a new scheme for the wetting boundary condition is proposed which can handle complicated 3D geometries. The validity of our method for static problems is demonstrated by comparing the simulated results to analytical solutions in 2D and 3D geometries with curved boundaries. Then, capillary rise simulations are performed to study dynamic problems where the three-phase contact line moves. The results are compared to experimental results in the literature (Heshmati and Piri, 2014). If a constant contact angle is assumed, the simulations agree with the analytical solution based on the Lucas-Washburn equation. However, to match the experiments, we need to implement a dynamic contact angle that varies with the flow rate.

GIS diagnostics: thermal imaging systems used for poor contact detection

NASA Astrophysics Data System (ADS)

Avital, Doron; Brandenbursky, V.; Farber, A.

2004-04-01

The reliability of GIS is very high but any failure that occurs can cause extensive damage result and the repair times are considerably long. The consequential losses to system security and economically can be high, especially if the nominal GIS voltage is 420 kV and above. In view of these circumstances, increasing attention is being given to diagnostic techniques for in-service maintenance undertaken to improve the reliability and availability of GIS. Recently considerable progress has been made in diagnostic techniques and they are now used successfully during the service life of the equipment. These diagnostic techniques in general focus on the GIS insulation system and are based on partial discharge (PD) measurements in GIS. There are three main methods for in-service PD detection in GIS: - the chemical method that rely on the detection of cracked gas caused by PD, the acoustic method designed to detect the acoustic emission excited by PD, and, the electrical method which is based on detection of electrical resonance at ultra high frequencies (UHF) up to 1.5 GHz caused by PD excitation in GIS chambers (UHF method). These three dielectric diagnostic methods cannot be used for the detection of poor current carrying contacts in GIS. This problem does not always produce partial discharges and at early stages it does not cause gas cracking. An interesting solution to use two techniques - the current unbalance alarm scheme and partial discharge monitoring was advised by A. Salinas from South California Edison Co. Unfortunately this way is complicated and very expensive. The investigations performed in Japan on standing alone SF6 breaker showed that joule heating of the contact accompanied by released power of 1600 Watt produce temperature difference on the enclosure up to 7 degrees centigrade that could be detected by infra-red Thermal Imaging System. According to CIGRE Joint Working Group 33/23.12 Report, 11% of all GIS failures are due to poor current carrying contacts in GIS. The Israel Electric Company (IEC) in seeking a solution to this problem have undertaken experimental work to examine the possibility of in-service diagnostic of poor contact problem in GIS via direct local heating detection, using a Thermal Imaging System. The experiments were carried out on the part of the GIS with nominal SF6 pressure. The following aspects of the problem were examined: - the range of power released in the defective contact that could give the practical temperature rise on the surface of enclosure; - temperature distribution on the surface of enclosure; - the influence of spacer type (with holes or without) on the heat transfer process; - the influence of the length of SF6 tubes and there position (horizontal or vertical); - the temperature difference between upper and lower parts of the tubes in horizontal position; - practical use of the Thermal Imaging System for detecting poor contact problem in GIS.

Computing an upper bound on contact stress with surrogate duality

NASA Astrophysics Data System (ADS)

Xuan, Zhaocheng; Papadopoulos, Panayiotis

2016-07-01

We present a method for computing an upper bound on the contact stress of elastic bodies. The continuum model of elastic bodies with contact is first modeled as a constrained optimization problem by using finite elements. An explicit formulation of the total contact force, a fraction function with the numerator as a linear function and the denominator as a quadratic convex function, is derived with only the normalized nodal contact forces as the constrained variables in a standard simplex. Then two bounds are obtained for the sum of the nodal contact forces. The first is an explicit formulation of matrices of the finite element model, derived by maximizing the fraction function under the constraint that the sum of the normalized nodal contact forces is one. The second bound is solved by first maximizing the fraction function subject to the standard simplex and then using Dinkelbach's algorithm for fractional programming to find the maximum—since the fraction function is pseudo concave in a neighborhood of the solution. These two bounds are solved with the problem dimensions being only the number of contact nodes or node pairs, which are much smaller than the dimension for the original problem, namely, the number of degrees of freedom. Next, a scheme for constructing an upper bound on the contact stress is proposed that uses the bounds on the sum of the nodal contact forces obtained on a fine finite element mesh and the nodal contact forces obtained on a coarse finite element mesh, which are problems that can be solved at a lower computational cost. Finally, the proposed method is verified through some examples concerning both frictionless and frictional contact to demonstrate the method's feasibility, efficiency, and robustness.

Mitigation of epidemics in contact networks through optimal contact adaptation *

PubMed Central

Youssef, Mina; Scoglio, Caterina

2013-01-01

This paper presents an optimal control problem formulation to minimize the total number of infection cases during the spread of susceptible-infected-recovered SIR epidemics in contact networks. In the new approach, contact weighted are reduced among nodes and a global minimum contact level is preserved in the network. In addition, the infection cost and the cost associated with the contact reduction are linearly combined in a single objective function. Hence, the optimal control formulation addresses the tradeoff between minimization of total infection cases and minimization of contact weights reduction. Using Pontryagin theorem, the obtained solution is a unique candidate representing the dynamical weighted contact network. To find the near-optimal solution in a decentralized way, we propose two heuristics based on Bang-Bang control function and on a piecewise nonlinear control function, respectively. We perform extensive simulations to evaluate the two heuristics on different networks. Our results show that the piecewise nonlinear control function outperforms the well-known Bang-Bang control function in minimizing both the total number of infection cases and the reduction of contact weights. Finally, our results show awareness of the infection level at which the mitigation strategies are effectively applied to the contact weights. PMID:23906209

Mitigation of epidemics in contact networks through optimal contact adaptation.

PubMed

Youssef, Mina; Scoglio, Caterina

2013-08-01

This paper presents an optimal control problem formulation to minimize the total number of infection cases during the spread of susceptible-infected-recovered SIR epidemics in contact networks. In the new approach, contact weighted are reduced among nodes and a global minimum contact level is preserved in the network. In addition, the infection cost and the cost associated with the contact reduction are linearly combined in a single objective function. Hence, the optimal control formulation addresses the tradeoff between minimization of total infection cases and minimization of contact weights reduction. Using Pontryagin theorem, the obtained solution is a unique candidate representing the dynamical weighted contact network. To find the near-optimal solution in a decentralized way, we propose two heuristics based on Bang-Bang control function and on a piecewise nonlinear control function, respectively. We perform extensive simulations to evaluate the two heuristics on different networks. Our results show that the piecewise nonlinear control function outperforms the well-known Bang-Bang control function in minimizing both the total number of infection cases and the reduction of contact weights. Finally, our results show awareness of the infection level at which the mitigation strategies are effectively applied to the contact weights.

Telephone triage by GPs in out-of-hours primary care in Denmark: a prospective observational study of efficiency and relevance

PubMed Central

Huibers, Linda; Moth, Grete; Carlsen, Anders H; Christensen, Morten B; Vedsted, Peter

2016-01-01

Background In the UK, telephone triage in out-of-hours primary care is mostly managed by nurses, whereas GPs perform triage in Denmark. Aim To describe telephone contacts triaged to face-to-face contacts, GP-assessed relevance, and factors associated with triage to face-to-face contact. Design and setting A prospective observational study in Danish out-of-hours primary care, conducted from June 2010 to May 2011. Method Information on patients was collected from the electronic patient administration system and GPs completed electronic questionnaires about the contacts. The GPs conducting the face-to-face contacts assessed relevance of the triage to face-to-face contacts. The authors performed binomial regression analyses, calculating relative risk (RR) and 95% confidence intervals. Results In total, 59.2% of calls ended with a telephone consultation. Factors associated with triage to a face-to-face contact were: patient age >40 years (40–64: RR = 1.13; >64: RR = 1.34), persisting problem for 12–24 hours (RR = 1.15), severe problem (RR = 2.60), potentially severe problem (RR = 5.81), and non-severe problem (RR = 2.23). Face-to-face contacts were assessed as irrelevant for 12.7% of clinic consultations and 11.7% of home visits. A statistically significantly higher risk of irrelevant face-to-face contact was found for a persisting problem of >24 hours (RR = 1.25), contact on weekday nights (RR = 1.25), and contact <2 hours before the patient’s own GP’s opening time (RR = 1.80). Conclusion Around 12% of all face-to-face consultations in the study are assessed as irrelevant by GP colleagues, suggesting that GP triage is efficient. Knowledge of the factors influencing triage can provide better education for GPs, but future studies are needed to investigate other quality aspects of GP telephone triage. PMID:27432608

The contact sport of rough surfaces

NASA Astrophysics Data System (ADS)

Carpick, Robert W.

2018-01-01

Describing the way two surfaces touch and make contact may seem simple, but it is not. Fully describing the elastic deformation of ideally smooth contacting bodies, under even low applied pressure, involves second-order partial differential equations and fourth-rank elastic constant tensors. For more realistic rough surfaces, the problem becomes a multiscale exercise in surface-height statistics, even before including complex phenomena such as adhesion, plasticity, and fracture. A recent research competition, the “Contact Mechanics Challenge” (1), was designed to test various approximate methods for solving this problem. A hypothetical rough surface was generated, and the community was invited to model contact with this surface with competing theories for the calculation of properties, including contact area and pressure. A supercomputer-generated numerical solution was kept secret until competition entries were received. The comparison of results (2) provides insights into the relative merits of competing models and even experimental approaches to the problem.

Generalized contact and improved frictional heating in the material point method

NASA Astrophysics Data System (ADS)

Nairn, J. A.; Bardenhagen, S. G.; Smith, G. D.

2017-09-01

The material point method (MPM) has proved to be an effective particle method for computational mechanics modeling of problems involving contact, but all prior applications have been limited to Coulomb friction. This paper generalizes the MPM approach for contact to handle any friction law with examples given for friction with adhesion or with a velocity-dependent coefficient of friction. Accounting for adhesion requires an extra calculation to evaluate contact area. Implementation of velocity-dependent laws usually needs numerical methods to find contacting forces. The friction process involves work which can be converted into heat. This paper provides a new method for calculating frictional heating that accounts for interfacial acceleration during the time step. The acceleration terms is small for many problems, but temporal convergence of heating effects for problems involving vibrations and high contact forces is improved by the new method. Fortunately, the new method needs few extra calculations and therefore is recommended for all simulations.

Generalized contact and improved frictional heating in the material point method

NASA Astrophysics Data System (ADS)

Nairn, J. A.; Bardenhagen, S. G.; Smith, G. D.

2018-07-01

The material point method (MPM) has proved to be an effective particle method for computational mechanics modeling of problems involving contact, but all prior applications have been limited to Coulomb friction. This paper generalizes the MPM approach for contact to handle any friction law with examples given for friction with adhesion or with a velocity-dependent coefficient of friction. Accounting for adhesion requires an extra calculation to evaluate contact area. Implementation of velocity-dependent laws usually needs numerical methods to find contacting forces. The friction process involves work which can be converted into heat. This paper provides a new method for calculating frictional heating that accounts for interfacial acceleration during the time step. The acceleration terms is small for many problems, but temporal convergence of heating effects for problems involving vibrations and high contact forces is improved by the new method. Fortunately, the new method needs few extra calculations and therefore is recommended for all simulations.

Time domain contact model for tyre/road interaction including nonlinear contact stiffness due to small-scale roughness

NASA Astrophysics Data System (ADS)

Andersson, P. B. U.; Kropp, W.

2008-11-01

Rolling resistance, traction, wear, excitation of vibrations, and noise generation are all attributes to consider in optimisation of the interaction between automotive tyres and wearing courses of roads. The key to understand and describe the interaction is to include a wide range of length scales in the description of the contact geometry. This means including scales on the order of micrometres that have been neglected in previous tyre/road interaction models. A time domain contact model for the tyre/road interaction that includes interfacial details is presented. The contact geometry is discretised into multiple elements forming pairs of matching points. The dynamic response of the tyre is calculated by convolving the contact forces with pre-calculated Green's functions. The smaller-length scales are included by using constitutive interfacial relations, i.e. by using nonlinear contact springs, for each pair of contact elements. The method is presented for normal (out-of-plane) contact and a method for assessing the stiffness of the nonlinear springs based on detailed geometry and elastic data of the tread is suggested. The governing equations of the nonlinear contact problem are solved with the Newton-Raphson iterative scheme. Relations between force, indentation, and contact stiffness are calculated for a single tread block in contact with a road surface. The calculated results have the same character as results from measurements found in literature. Comparison to traditional contact formulations shows that the effect of the small-scale roughness is large; the contact stiffness is only up to half of the stiffness that would result if contact is made over the whole element directly to the bulk of the tread. It is concluded that the suggested contact formulation is a suitable model to include more details of the contact interface. Further, the presented result for the tread block in contact with the road is a suitable input for a global tyre/road interaction model that is also based on the presented contact formulation.

Multi-point contact of the high-speed vehicle-turnout system dynamics

NASA Astrophysics Data System (ADS)

Ren, Zunsong

2013-05-01

The wheel-rail contact problems, such as the number, location and the track of contact patches, are very important for optimizing the spatial structure of the rails and lowering the vehicle-turnout system dynamics. However, the above problems are not well solved currently because of having the difficulties in how to determine the multi-contact, to preciously present the changeable profiles of the rails and to establish an accurate spatial turnout system dynamics model. Based on a high-speed vehicle-turnout coupled model in which the track is modeled as flexible with rails and sleepers represented by beams, the line tracing extreme point method is introduced to investigate the wheel-rail multiple contact conditions and the key sections of the blade rail, longer nose rail, shorter rail in the switch and nose rail area are discretized to represent the varying profiles of rails in the turnout. The dynamic interaction between the vehicle and turnout is simulated for cases of the vehicle divergently passing the turnout and the multi-point contact is obtained. The tracks of the contact patches on the top of the rails are presented and the wheel-rail impact forces are offered in comparison with the contact patches transference on the rails. The numerical simulation results indicate that the length of two-point contact occurrence of a worn wheel profile and rails is longer than that of the new wheel profile and rails; The two-point contact definitely occurs in the switch and crossing area. Generally, three-point contact doesn't occur for the new rail profile, which is testified by the wheel-rails interpolation distance and the first order derivative function of the tracing line extreme points. The presented research is not only helpful to optimize the structure of the turnout, but also useful to lower the dynamics of the high speed vehicle-turnout system.

Slow Growth of a Crack with Contacting Faces in a Viscoelastic Body

NASA Astrophysics Data System (ADS)

Selivanov, M. F.

2017-11-01

An algorithm for solving the problem of slow growth of a mode I crack with a zone of partial contact of the faces is proposed. The algorithm is based on a crack model with a cohesive zone, an iterative method of finding a solution for the elastic opening displacement, and elasto-viscoelastic analogy, which makes it possible to describe the time-dependent opening displacement in Boltzmann-Volterra form. A deformation criterion with a constant critical opening displacement and cohesive strength during quasistatic crack growth is used. The algorithm was numerically illustrated for tensile loading at infinity and two concentrated forces symmetric about the crack line that cause the crack faces to contact. When the crack propagates, the contact zone disappears and its dynamic growth begins.

Dualism-Based Design of the Introductory Chinese MOOC "Kit de contact en langue chinoise"

ERIC Educational Resources Information Center

Wang-Szilas, Jue; Bellassen, Joël

2017-01-01

This article reviews the existing Chinese language Massive Open Online Courses (MOOCs) and points out three problems in their design: the monism-based teaching method, the non-integration of cultural elements, and the lack of learner-learner interactions. It then presents the design principles of the Introductory Chinese MOOC in an attempt to…

A theoretical study of optical contact of vitreous silica

NASA Technical Reports Server (NTRS)

Barber, T. D.

1972-01-01

Optical contact has been proposed as a method of bonding quartz parts of the Stanford relativity satellite. The theory of the van der Waals force is outlined and applied to the problem of optical contact. The effect of various contaminations is discussed and a program of experimentation for further study of the problem is presented.

Spacecraft Electrical Connector Selection and Application Processes

NASA Technical Reports Server (NTRS)

Iannello, Chris; Davis, Mitchell I; Kichak, Robert A.; Slenski, George

2009-01-01

This assessment was initiated by the NASA Engineering & Safety Center (NESC) after a number of recent "high profile" connector problems, the most visible and publicized of these being the problem with the Space Shuttle's Engine Cut-Off System cryogenic feed-thru connector. The NESC commissioned a review of NASA's connector selection and application processes for space flight applications, including how lessons learned and past problem records are fed back into the processes to avoid recurring issues. Team members were primarily from the various NASA Centers and included connector and electrical parts specialists. The commissioned study was conducted on spacecraft connector selection and application processes at NASA Centers. The team also compared the NASA spacecraft connector selection and application process to the military process, identified recent high profile connector failures, and analyzed problem report data looking for trends and common occurrences. The team characterized NASA's connector problem experience into a list of top connector issues based on anecdotal evidence of a system's impact and commonality between Centers. These top issues are as follows, in no particular rank order: electrically shorted, bent and/or recessed contact pins, contact pin/socket contamination leading to electrically open or intermittencies, connector plating corrosion or corrosion of connector components, low or inadequate contact pin retention forces, contact crimp failures, unmated connectors and mis-wiring due to workmanship errors during installation or maintenance, loose connectors due to manufacturing defects such as wavy washer and worn bayonet retention, damaged connector elastomeric seals and cryogenic connector failure. A survey was also conducted of SAE Connector AE-8C1 committee members regarding their experience relative to the NASA concerns on connectors. The most common responses in order of occurrence were contact retention, plating issues, worn-out or damaged coupling mechanisms, bent pins, contact crimp barrel cracking and torn seals. In addition to these common themes, responses included issues with markings, dimensional errors on the build, contact/socket damage (handling), manufacturing defects and customer misapplication and mishandling. The NESC team concluded that considering the large quantity and wide variety of connectors successfully flown on human and robotic space applications, the number of failures is quite low. However, "high profile" failures with significant cost, schedule, safety, and/or mission success impacts continue to occur. It was also concluded that connector failures occur throughout a system's life-cycle with the majority of connector issues application related. A number of recommendations were identified for improving NASA connector selection processes and overall space connector reliability and performance.

Optimal contact definition for reconstruction of contact maps.

PubMed

Duarte, Jose M; Sathyapriya, Rajagopal; Stehr, Henning; Filippis, Ioannis; Lappe, Michael

2010-05-27

Contact maps have been extensively used as a simplified representation of protein structures. They capture most important features of a protein's fold, being preferred by a number of researchers for the description and study of protein structures. Inspired by the model's simplicity many groups have dedicated a considerable amount of effort towards contact prediction as a proxy for protein structure prediction. However a contact map's biological interest is subject to the availability of reliable methods for the 3-dimensional reconstruction of the structure. We use an implementation of the well-known distance geometry protocol to build realistic protein 3-dimensional models from contact maps, performing an extensive exploration of many of the parameters involved in the reconstruction process. We try to address the questions: a) to what accuracy does a contact map represent its corresponding 3D structure, b) what is the best contact map representation with regard to reconstructability and c) what is the effect of partial or inaccurate contact information on the 3D structure recovery. Our results suggest that contact maps derived from the application of a distance cutoff of 9 to 11A around the Cbeta atoms constitute the most accurate representation of the 3D structure. The reconstruction process does not provide a single solution to the problem but rather an ensemble of conformations that are within 2A RMSD of the crystal structure and with lower values for the pairwise average ensemble RMSD. Interestingly it is still possible to recover a structure with partial contact information, although wrong contacts can lead to dramatic loss in reconstruction fidelity. Thus contact maps represent a valid approximation to the structures with an accuracy comparable to that of experimental methods. The optimal contact definitions constitute key guidelines for methods based on contact maps such as structure prediction through contacts and structural alignments based on maximum contact map overlap.

Optimal contact definition for reconstruction of Contact Maps

PubMed Central

2010-01-01

Background Contact maps have been extensively used as a simplified representation of protein structures. They capture most important features of a protein's fold, being preferred by a number of researchers for the description and study of protein structures. Inspired by the model's simplicity many groups have dedicated a considerable amount of effort towards contact prediction as a proxy for protein structure prediction. However a contact map's biological interest is subject to the availability of reliable methods for the 3-dimensional reconstruction of the structure. Results We use an implementation of the well-known distance geometry protocol to build realistic protein 3-dimensional models from contact maps, performing an extensive exploration of many of the parameters involved in the reconstruction process. We try to address the questions: a) to what accuracy does a contact map represent its corresponding 3D structure, b) what is the best contact map representation with regard to reconstructability and c) what is the effect of partial or inaccurate contact information on the 3D structure recovery. Our results suggest that contact maps derived from the application of a distance cutoff of 9 to 11Å around the Cβ atoms constitute the most accurate representation of the 3D structure. The reconstruction process does not provide a single solution to the problem but rather an ensemble of conformations that are within 2Å RMSD of the crystal structure and with lower values for the pairwise average ensemble RMSD. Interestingly it is still possible to recover a structure with partial contact information, although wrong contacts can lead to dramatic loss in reconstruction fidelity. Conclusions Thus contact maps represent a valid approximation to the structures with an accuracy comparable to that of experimental methods. The optimal contact definitions constitute key guidelines for methods based on contact maps such as structure prediction through contacts and structural alignments based on maximum contact map overlap. PMID:20507547

Finite Element Analysis for Turbine Blades with Contact Problems

NASA Astrophysics Data System (ADS)

Yang, Yuan-Jian; Yang, Liang; Wang, Hai-Kun; Zhu, Shun-Peng; Huang, Hong-Zhong

2016-12-01

Turbine blades are one of the key components in a typical turbofan engine, which plays an important role in flight safety. In this paper, we establish a establishes a three-dimensional finite element model of the turbine blades, then analyses the strength of the blade in complicated conditions under the joint function of temperature load, centrifugal load, and aerodynamic load. Furthermore, contact analysis of blade tenon and dovetail slot is also carried out to study the stress based on the contact elements. Finally, the Von Mises stress-strain distributions are obtained to acquire the several dangerous points and maximum Von Mises stress, which provide the basis for life prediction of turbine blade.

Determination of Principal Curvatures and Contact Ellipse for Profile Crowned Helical Gears

NASA Technical Reports Server (NTRS)

Feng, P.-H.; Litvin, F. L.; Townsend, D. P.; Handschuh, R. F.

1999-01-01

Helical gears with localized bearing contact of tooth surfaces achieved by profile crowning of tooth surfaces are considered. Profile crowning is provided by application of two imaginary rack-cutters with mismatched surfaces. The goal is to determine the dimensions and orientation of the instantaneous contact ellipse that requires the determination of principle curvatures of pinion-gear tooth surfaces. A simplified solution to this problem is proposed based on the approach development for correlation of principal curvatures and directions of generating and generated tooth surfaces. The obtained equations are applied for profile crowning where the normal profiles of the rack-cutters are either a circular arc or a straight line.

Investigation of transparent zinc oxide-based contacts for high performance III-nitride light emitting diodes

NASA Astrophysics Data System (ADS)

Jung, Sungpyo

In this dissertation, we investigate Al-doped ZnO(AZO) contact structure to a variety of GaN LED structures. Our results show that ZnO is a potentially viable transparent contact for GaN-based LEDs. We began our investigation by depositing AZO and Ni/AZO contacts to p-GaN. However, these contacts are highly resistive. Next, we deposited thin Ni/Au layer, oxidized the Ni/Au layer to form a good ohmic contact to p-GaN, and then followed by the deposition of thick AZO layer. However, the electrical resistance of oxidized Ni/Au-AZO contacts is higher than that of the conventional Ni/Au contacts. We solve the high contact resistance problem by using a two-step thermal annealing process. In this method, Ni/Au layer is deposited first followed by the AZO layer without any annealing step. After finishing the device fabrication, the samples are annealed in air first to achieve low contact resistance with Ni/Au/AZO and p-GaN and then annealed in nitrogen to achieve low sheet resistance for the AZO layer. The improved electrical and optical characteristics of this scheme compared to conventional Ni/Au contact scheme are demonstrated on a variety of GaN LEDs: blue, green, small area, large area and bottom emitting LEDs. The benefits of ZnO-based contacts are more significant in large area LEDs that include lower forward voltage, and higher optical emission, better emission uniformity and reliability. The advantages of ZnO-based contact in terms of lower contact resistance and higher optical emission on LED fabricated on roughened GaN wafers are also demonstrated. For bottom emitting LED structure intended for flip chip applications, our original oxidized Ni/Au layer over coated with either Al or Ag contacts have shown to simultaneously yield superior I-V characteristics and greatly enhanced optical performance compared to conventional LEDs using a thick Ni/Au contact in the flip-chip configuration. However, the contact is unstable at operating temperatures > 100°C due to close proximity of Ag and Al with p-GaN. Here, the ZnO layer probably can be interdiffusion barrier layer of Al into GaN. We have demonstrated low contact resistance and higher light emission by using ZnO as a barrier material between oxidize Ni/Au and Al reflecting layer. In summary, our investigation demonstrates the applicability of ZnO-based transparent contacts for high performance LEDs that will be larger in size and are expected to be operating at higher current for solid-state lighting of the future. (Abstract shortened by UMI.)

The patient-zero problem with noisy observations

NASA Astrophysics Data System (ADS)

Altarelli, Fabrizio; Braunstein, Alfredo; Dall'Asta, Luca; Ingrosso, Alessandro; Zecchina, Riccardo

2014-10-01

A belief propagation approach has been recently proposed for the patient-zero problem in SIR epidemics. The patient-zero problem consists of finding the initial source of an epidemic outbreak given observations at a later time. In this work, we study a more difficult but related inference problem, in which observations are noisy and there is confusion between observed states. In addition to studying the patient-zero problem, we also tackle the problem of completing and correcting the observations to possibly find undiscovered infected individuals and false test results. Moreover, we devise a set of equations, based on the variational expression of the Bethe free energy, to find the patient-zero along with maximum-likelihood epidemic parameters. We show, by means of simulated epidemics, that this method is able to infer details on the past history of an epidemic outbreak based solely on the topology of the contact network and a single snapshot of partial and noisy observations.

A Class of time-fractional hemivariational inequalities with application to frictional contact problem

NASA Astrophysics Data System (ADS)

Zeng, Shengda; Migórski, Stanisław

2018-03-01

In this paper a class of elliptic hemivariational inequalities involving the time-fractional order integral operator is investigated. Exploiting the Rothe method and using the surjectivity of multivalued pseudomonotone operators, a result on existence of solution to the problem is established. Then, this abstract result is applied to provide a theorem on the weak solvability of a fractional viscoelastic contact problem. The process is quasistatic and the constitutive relation is modeled with the fractional Kelvin-Voigt law. The friction and contact conditions are described by the Clarke generalized gradient of nonconvex and nonsmooth functionals. The variational formulation of this problem leads to a fractional hemivariational inequality.

Space plasma contractor research, 1988

NASA Technical Reports Server (NTRS)

Williams, John D.; Wilbur, Paul J.

1989-01-01

Results of experiments conducted on hollow cathode-based plasma contractors are reported. Specific tests in which attempts were made to vary plasma conditions in the simulated ionospheric plasma are described. Experimental results showing the effects of contractor flowrate and ion collecting surface size on contactor performance and contactor plasma plume geometry are presented. In addition to this work, one-dimensional solutions to spherical and cylindircal space-charge limited double-sheath problems are developed. A technique is proposed that can be used to apply these solutions to the problem of current flow through elongated double-sheaths that separate two cold plasmas. Two conference papers which describe the essential features of the plasma contacting process and present data that should facilitate calibration of comprehensive numerical models of the plasma contacting process are also included.

Strategies and future attempts to reduce stigmatization and increase awareness of mental health problems among young people: a narrative review of educational interventions.

PubMed

Yamaguchi, Sosei; Mino, Yoshio; Uddin, Shahir

2011-08-01

There is a need to reduce stigma and increase awareness in order to prevent social exclusion of people with mental illness and to facilitate the use of mental health services in young people. The purpose of this review was to examine the effects of educational interventions to reduce stigmatization and improve awareness of mental health problems among young people. An electronic search using MEDLINE, PsycINFO and Academic Search Complete was carried out for studies that evaluated the effectiveness of educational interventions. Forty eligible studies were identified. There were three types of educational interventions (Educational condition, Video-based Contact condition and Contact condition). Eighteen of 23 studies reported significant improvements in knowledge, 27 of 34 studies yielded significant changes in attitudes towards people with mental illness. Significant effects in social distance were found in 16 of 20 studies. Two of five studies significantly improved young people's awareness of mental illness. However, six studies reported difficulties in maintaining improved knowledge, attitudes and social distance in young people. Furthermore, the majority of studies did not measure the actual behavioral change. From the comparison of the three types of educational interventions, direct contact with people with mental illness (Contact condition) seems to be key in reducing stigmatization, while the components of Education and Video-based contact conditions are still arguable. Despite the demonstration of the positive effects of each educational intervention, their long-term effects are still unclear. Further research needs to involve measuring actual behavioral change and performing a long-term follow up. © 2011 The Authors. Psychiatry and Clinical Neurosciences © 2011 Japanese Society of Psychiatry and Neurology.

Geometric modelling of the contact point between the bushing and sprocket in chain drives

NASA Astrophysics Data System (ADS)

Saulescu, R.; Velicu, R.; Lates, M.

2017-02-01

An important problem of the bush chains dynamics is represented by the calculus of the normal and transversal forces on all the contacts; these forces are producing vibrations in the chain and due to this, the chain is affected by the wear. One aspect of that dynamics is referring directly on the sprockets geometry and on the bushing and sprocket contact. The paper presents a calculus method for the contact angle between the bushing and the sprocket; this angle is a variable one depending on the bushing’s number being in contact (i) and on the specific elongation of the chain (x) due to the functioning of it. Based on the presented calculus model, a comparative analysis is proposed for these factors by using sprockets with different teeth numbers and different specific elongations of the chain. The results of the numerical simulations allow the dissemination of recommendations regarding the contact angle’s evolution, from the beginning to the end of the contact and regarding the influence of the chain’s specific elongations on the out of use of it.

A sparse autoencoder-based deep neural network for protein solvent accessibility and contact number prediction.

PubMed

Deng, Lei; Fan, Chao; Zeng, Zhiwen

2017-12-28

Direct prediction of the three-dimensional (3D) structures of proteins from one-dimensional (1D) sequences is a challenging problem. Significant structural characteristics such as solvent accessibility and contact number are essential for deriving restrains in modeling protein folding and protein 3D structure. Thus, accurately predicting these features is a critical step for 3D protein structure building. In this study, we present DeepSacon, a computational method that can effectively predict protein solvent accessibility and contact number by using a deep neural network, which is built based on stacked autoencoder and a dropout method. The results demonstrate that our proposed DeepSacon achieves a significant improvement in the prediction quality compared with the state-of-the-art methods. We obtain 0.70 three-state accuracy for solvent accessibility, 0.33 15-state accuracy and 0.74 Pearson Correlation Coefficient (PCC) for the contact number on the 5729 monomeric soluble globular protein dataset. We also evaluate the performance on the CASP11 benchmark dataset, DeepSacon achieves 0.68 three-state accuracy and 0.69 PCC for solvent accessibility and contact number, respectively. We have shown that DeepSacon can reliably predict solvent accessibility and contact number with stacked sparse autoencoder and a dropout approach.

Variationally consistent discretization schemes and numerical algorithms for contact problems

NASA Astrophysics Data System (ADS)

Wohlmuth, Barbara

We consider variationally consistent discretization schemes for mechanical contact problems. Most of the results can also be applied to other variational inequalities, such as those for phase transition problems in porous media, for plasticity or for option pricing applications from finance. The starting point is to weakly incorporate the constraint into the setting and to reformulate the inequality in the displacement in terms of a saddle-point problem. Here, the Lagrange multiplier represents the surface forces, and the constraints are restricted to the boundary of the simulation domain. Having a uniform inf-sup bound, one can then establish optimal low-order a priori convergence rates for the discretization error in the primal and dual variables. In addition to the abstract framework of linear saddle-point theory, complementarity terms have to be taken into account. The resulting inequality system is solved by rewriting it equivalently by means of the non-linear complementarity function as a system of equations. Although it is not differentiable in the classical sense, semi-smooth Newton methods, yielding super-linear convergence rates, can be applied and easily implemented in terms of a primal-dual active set strategy. Quite often the solution of contact problems has a low regularity, and the efficiency of the approach can be improved by using adaptive refinement techniques. Different standard types, such as residual- and equilibrated-based a posteriori error estimators, can be designed based on the interpretation of the dual variable as Neumann boundary condition. For the fully dynamic setting it is of interest to apply energy-preserving time-integration schemes. However, the differential algebraic character of the system can result in high oscillations if standard methods are applied. A possible remedy is to modify the fully discretized system by a local redistribution of the mass. Numerical results in two and three dimensions illustrate the wide range of possible applications and show the performance of the space discretization scheme, non-linear solver, adaptive refinement process and time integration.

78 FR 69710 - Luminant Generation Company, LLC

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-20

... methods: Federal Rulemaking Web site: Go to http://www.regulations.gov and search for Docket ID NRC-2008... . To begin the search, select ``ADAMS Public Documents'' and then select ``Begin Web- based ADAMS Search.'' For problems with ADAMS, please contact the NRC's Public [[Page 69711

Student and faculty perceptions of problem-based learning on a family medicine clerkship.

PubMed

McGrew, M C; Skipper, B; Palley, T; Kaufman, A

1999-03-01

The value of problem-based learning (PBL) in the preclinical years of medical school has been described widely in the literature. This study evaluates student and faculty perceptions of PBL during the clinical years of medical school, on a family medicine clerkship. Students used a 4-point scale to rate clerkship educational components on how well learning was facilitated. Faculty narratives of their perceptions of PBL were reviewed. Educational components that involved active learning by students--clinical activity, independent learning, and PBL tutorials--were ranked highest by students. Faculty perceived that PBL on the clerkship simulated "real-life" learning, included more behavioral and population issues, and provided substantial blocks of student contact time for improved student evaluation. Students and faculty in a family medicine clerkship ranked PBL sessions higher than any other nonclinical component of the clerkship. In addition to providing students with opportunities for self-directed learning, the PBL sessions provide faculty with more contact time with students, thereby enhancing the assessment of students' learning and progress.

New problems and opportunities of oil spill monitoring systems

NASA Astrophysics Data System (ADS)

Barenboim, G. M.; Borisov, V. M.; Golosov, V. N.; Saveca, A. Yu.

2015-04-01

Emergency oil and oil products spills represent a great danger to the environment, including ecosystems, and to the population. New problems of such dangerous spills and methods of early detection are discussed in this paper. It is proposed to conduct assessment of biological hazards of such spills on the basis of data on the distribution of individual oil hydrocarbons within the column of the water body and computer predictions of their toxicity. Oil radioactivity, which is associated with uranium and thorium, is seen as the important aspect of the oil spill danger, especially in watercourses. The need for an automated monitoring system for the early detection of oil spills in water bodies is analysed. The proposed system consists of three subsystems. The first remote sensing subsystem is based on powerful fluorescent lidars; experimental results on lidar registration of oil pollution of water are reported. The second subsystem uses a network of automatic monitoring stations with contact detectors. The third subsystem is the combined sensor system based on remote and contact technologies.

[Trends of refractive correction in the Japanese Ground Self-Defense Forces: examination after the Great East Japan earthquake].

PubMed

Harimoto, Kouzo; Kato, Naoko; Shoji, Takuhei; Goto, Hiroya; Tokuno, Shinichi; Fujii, Manabu; Takeuchi, Masaru

2014-02-01

To investigate the trends in refractive correction in Japanese Ground Self-Defense Forces' (JGSDF) soldiers. A questionnaire was distributed to 519 soldiers of the Camp Funaoka in the northeastern region. Five hundred and sixteen subjects (99.4%) responded. In total, 246 soldiers (47.7%) wore spectacles or contact lenses. Among the contact lens wearers, 52 had experienced problems previously and 35 reported problems that occurred during military exercises. With regard to military exercises, 66.9% and 63.5% of the spectacle or disposable soft contact lens-users reported inconvenience. Among contact lens users, 33.1% reported that they changed to new sterilized contact lenses only occasionally and 61.9% did not change their contact lenses at all during exercises. During disaster-relief work, subjects worried 'very' (21.5%) or 'somewhat' (46.9%) about problems associated with their spectacles or contact lenses. Twenty-four had undergone refractive surgery (4.9%). About one-half of the JGSDF soldiers surveyed required refractive correction. Attention to convenient and safe refractive correction in the military is warranted.

Criminal Justice Contact, Stressors, and Obesity-Related Health Problems Among Black Adults in the USA.

PubMed

Archibald, Paul C; Parker, Lauren; Thorpe, Roland

2018-04-01

Criminal justice contact-defined as lifetime arrest, parole, or incarceration, seems to exacerbate chronic conditions, and those who are most likely to have had contact with the criminal justice system, such as Black adults, often already have pre-existing disproportionately high rates of stress and chronic conditions due to the social determinants of health that affect underrepresented minorities. Findings from this study suggest that there is a mechanism that links the stressors among Black adults manifested by such factors as family, financial, neighborhood, and personal problems with criminal justice contact to obesity-related health status. Using the National Survey of American Life (NSAL), modified Poisson regression analyses were used to determine the association between criminal justice contact, stressors, and obesity-related health problems among a national sample of Black adults (n = 5008). In the full model, the odds of experiencing obesity-related health problems for Black adults who had criminal justice contact was reduced (PR, 1.23 to 1.14) and not statistically significant. Black adults who reported experiencing family stressors (PR, 1.21; 95% CI, 1.08, 1.36), financial stressors (PR, 1.30; 95% CI, 1.16, 1.47), and personal stressors (PR, 1.16; 95% CI, 1.02, 1.31) were statistically significant and higher than those who reported not experiencing any of these stressors; neighborhood stressors was not statistically significant. The evidence suggests a relationship between the stressors associated with criminal justice contact and obesity-related health status. These findings emphasize the need to further explore the family, financial, and personal stressors for Black adults with criminal justice contact in order to further our understanding of their obesity-related health problems.ᅟ.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wołek, Karol; Cieplak, Marek, E-mail: mc@ifpan.edu.pl

In structure-based models of proteins, one often assumes that folding is accomplished when all contacts are established. This assumption may frequently lead to a conceptual problem that folding takes place in a temperature region of very low thermodynamic stability, especially when the contact map used is too sparse. We consider six different structure-based models and show that allowing for a small, but model-dependent, percentage of the native contacts not being established boosts the folding temperature substantially while affecting the time scales of folding only in a minor way. We also compare other properties of the six models. We show thatmore » the choice of the description of the backbone stiffness has a substantial effect on the values of characteristic temperatures that relate both to equilibrium and kinetic properties. Models without any backbone stiffness (like the self-organized polymer) are found to perform similar to those with the stiffness, including in the studies of stretching.« less

Finite element analysis of fretting contact for nonhomogenous materials

NASA Astrophysics Data System (ADS)

Korkmaz, Y. M.; Coker, D.

2018-01-01

Fretting problem arises in the case of relatively small sliding motion between contacting surfaces. Fatigue life of the components that are in contact with each other, especially in rotorcraft may be significantly reduced due to fretting. The purpose of this study is to investigate material inhomogeneity near the contact region on the fretting problem in a cylindrical on flat contact configuration. A finite element (FE) model was constructed by using commercial finite element package ABAQUSTMto study partial sliding and stress concentrations. In order to investigate the effect of material inhomogeneity, the fretting contact is analyzed by introducing voids near the contact region. The void size and an array of voids is introduced into the substrate. The results are compared in terms of pressure, shear traction, tangential stress magnitudes and relative slip between the contacting materials.

Numerical Simulation of Liquid Metal RF MEMS Switch Based on EWOD

NASA Astrophysics Data System (ADS)

Liu, Tingting; Gao, Yang; Yang, Tao; Guo, Huihui

2018-03-01

Conventional RF MEMS switches rely on metal-to-dielectric or metal-to-metal contacts. Some problems in the “solid-solid” contact, such as contact degradation, signal bounce and poor reliability, can be solved by using “liquid-solid” contact. The RF MEMS switch based on liquid metal is characterized by small contact resistance, no moving parts, high reliability and long life. Using electrowetting-on-dielectric (EWOD) way to control the movement of liquid metal in the RF MEMS switch, to achieve the “on” and “off” of the switch. In this paper, the electrical characteristics and RF characteristics of RF MEMS switches are simulated by fluid mechanics software FLUENT and electromagnetic simulation software HFSS. The effects of driving voltage, switching time, dielectric layer, hydrophobic layer material and thickness, switching channel height on the RF characteristics are studied. The results show that to increase the external voltage to the threshold voltage of 58V, the liquid metal began to move, and the switching time from “off” state to “on” state is 16ms. In the 0~20GHz frequency range, the switch insertion loss is less than 0.28dB, isolation is better than 23.32dB.

Transmission and Reproduction of Force Sensation by Bilateral Control

NASA Astrophysics Data System (ADS)

Katsura, Seiichiro; Ohnishi, Kouhei

Minimally invasive surgery (MIS) which thinks a great deal of patient’s quality of life (QOL) has attracted attention during about ten years. In this paper, it aims at development of the technology for transmitting force sensation required in medical treatment especially through surgical instruments, such as forceps. In bilateral control, it is a problem how master and slave robots realize the law of action and reaction to the environment. Mechanism of contact with environment and bilateral controller based on stiffness are shown. Master arm in contact with human and slave arm in contact with environment are given compliance, and stable contact with environment can be realized. The proposed method is applied to 3-link master-slave manipulators. As a result, transmission and reproduction of force sensation can be realized. The experimental results show viability of the proposed method.

Patient problems, advanced practice nurse (APN) interventions, time and contacts among five patient groups.

PubMed

Brooten, Dorothy; Youngblut, JoAnne M; Deatrick, Janet; Naylor, Mary; York, Ruth

2003-01-01

To describe patient problems and APN interventions in each of five clinical trials and to establish links among patient problems, APN interventions, APN time and number of contacts, patient outcomes, and health care costs. Analysis of 333 interaction logs created by APNs during five randomized controlled trials: (a) very low birthweight infants (n = 39); (b) women with unplanned cesarean birth (n = 61), (c) high-risk pregnancy (n = 44), and (d) hysterectomy (n = 53); and (e) elders with cardiac medical and surgical diagnoses (n = 139). Logs containing recordings of all APN interactions with participants, APN time and type of patient contact were content analyzed with the smallest phrase or sentence representing a "unit." These units were then classified using the Omaha Classification System to determine patient problems and APN interventions. Groups were compared concerning total amount of APN time, number of contacts per patient, and mean length of time per APN contact. All studies were conducted in the United States. Groups with greater mean APN time and contacts per patient had greater improvements in patients' outcomes and greater health care cost savings. Of the 150,131 APN interventions, surveillance was the predominant APN function in all five patient groups. Health teaching, guidance, and counseling was the second most frequent category of APN intervention in four of the five groups. In all five groups, treatments and procedures accounted for < 1% of total APN interventions. Distribution of patient problems (N = 150,131) differed across groups reflecting the health care problems common to the group. Dose of APN time and contacts makes a difference in improving patient outcomes and reducing health care costs. Skills needed by APNs in providing transitional care include well-developed skills in assessing, teaching, counseling, communicating, collaborating, knowing health behaviors, negotiating systems, and having condition-specific knowledge about different patient problems.

Unpacking the public stigma of problem gambling: The process of stigma creation and predictors of social distancing.

PubMed

Hing, Nerilee; Russell, Alex M T; Gainsbury, Sally M

2016-09-01

Background and aims Public stigma diminishes the health of stigmatized populations, so it is critical to understand how and why stigma occurs to inform stigma reduction measures. This study aimed to examine stigmatizing attitudes held toward people experiencing problem gambling, to examine whether specific elements co-occur to create this public stigma, and to model explanatory variables of this public stigma. Methods An online panel of adults from Victoria, Australia (N = 2,000) was surveyed. Measures were based on a vignette for problem gambling and included demographics, gambling behavior, perceived dimensions of problem gambling, stereotyping, social distancing, emotional reactions, and perceived devaluation and discrimination. A hierarchical linear regression was conducted. Results People with gambling problems attracted substantial negative stereotypes, social distancing, emotional reactions, and status loss/discrimination. These elements were associated with desired social distance, as was perceived that problem gambling is caused by bad character, and is perilous, non-recoverable, and disruptive. Level of contact with problem gambling, gambling involvement, and some demographic variables was significantly associated with social distance, but they explained little additional variance. Discussion and conclusions This study contributes to the understanding of how and why people experiencing gambling problems are stigmatized. Results suggest the need to increase public contact with such people, avoid perpetuation of stereotypes in media and public health communications, and reduce devaluing and discriminating attitudes and behaviors.

Unpacking the public stigma of problem gambling: The process of stigma creation and predictors of social distancing

PubMed Central

Hing, Nerilee; Russell, Alex M. T.; Gainsbury, Sally M.

2016-01-01

Background and aims Public stigma diminishes the health of stigmatized populations, so it is critical to understand how and why stigma occurs to inform stigma reduction measures. This study aimed to examine stigmatizing attitudes held toward people experiencing problem gambling, to examine whether specific elements co-occur to create this public stigma, and to model explanatory variables of this public stigma. Methods An online panel of adults from Victoria, Australia (N = 2,000) was surveyed. Measures were based on a vignette for problem gambling and included demographics, gambling behavior, perceived dimensions of problem gambling, stereotyping, social distancing, emotional reactions, and perceived devaluation and discrimination. A hierarchical linear regression was conducted. Results People with gambling problems attracted substantial negative stereotypes, social distancing, emotional reactions, and status loss/discrimination. These elements were associated with desired social distance, as was perceived that problem gambling is caused by bad character, and is perilous, non-recoverable, and disruptive. Level of contact with problem gambling, gambling involvement, and some demographic variables was significantly associated with social distance, but they explained little additional variance. Discussion and conclusions This study contributes to the understanding of how and why people experiencing gambling problems are stigmatized. Results suggest the need to increase public contact with such people, avoid perpetuation of stereotypes in media and public health communications, and reduce devaluing and discriminating attitudes and behaviors. PMID:27513611

Work Dissatisfaction and Sleep Problems among Canadians in the Latter Half of Life.

PubMed

Brown, Kyla; Bierman, Alex

2017-09-01

This study examined the relationship between work dissatisfaction and sleep problems among Canadian adults in the latter half of life, as well as how gender and social contact moderate this relationship. Data were obtained from the Canadian General Social Survey, Cycle 21 (2007), which sampled adults aged 45 and older in 2007. Analyses focused on individuals with employment as their main activity. Analyses show that work dissatisfaction positively predicts trouble sleeping. There are no significant gender differences in this relationship. Social contact with friends buffers this relationship, but social contact with family does not, and buffering does not vary significantly between men and women. This research contributes to knowledge on sleep problems by showing that work dissatisfaction is adversely associated with sleep problems among Canadians in the latter half of life, but social contact with friends can weaken this deleterious relationship.

Development of low cost contacts to silicon solar cells

NASA Technical Reports Server (NTRS)

Tanner, D. P.; Iles, P. A.

1980-01-01

A copper based contact system using plated Pd-Cr-Cu was developed. Good cells were made but cells degraded under low temperature (300 C) heat treatments. The degradation was identified as copper migration into the cells junction region. A paper study was conducted to find a proper barrier to the copper migration problem. Nickel was identified as the best candidate barrier and this was verified in a heat treatment study using evaporated metal layers. An electroless nickel solution was substituted for the electroless chromium solution in the original process.

A 3D model for rubber tyres contact, based on Kalker's methods through the STRIPES model

NASA Astrophysics Data System (ADS)

Chollet, Hugues

2012-01-01

A project on the pavement-rutting evolution under the effect of a tram on tyre, led the author to make a link between road and railway approaches to the problem of rolling contact. A simplified model is proposed with a fine description of the contact patch between a tyre and the road, and a more realistic pressure and shear stresses distribution than that available from basic models previously available. Experimental measurements are used to identify some characteristics of the force description, while the geometric shape of the tyre-road section are used, like in the traditional rail-wheel contact models, to build the 3D model. The last part validates a plausible contact pressure shape from self-aligning torque measurements and from Kalker's contact stresses gradient applied to the real tyre used in the project. The final result is a brush model extended from the wheel-rail STRIPES one, applicable to dynamics or contact studies of real tyres, with a physical coupling between longitudinal, lateral and spin effects, and a relatively fine description of the contact stresses along each strip of each tyre of the vehicle on an uneven road.

Evaluation of Contact Separation Force Testing as a Screening Methodology for Electrical Socket Contacts

NASA Technical Reports Server (NTRS)

Green, Chris; Greenwell, Chris; Brusse, jay; Krus, Dennis; Leidecker, Henning

2009-01-01

During system level testing intermittent and permanent open circuit failures of mated, crimp removable, electrical contact pairs were experienced. The root cause of the failures was determined to be low (but not zero) contact forces applied by the socket contact tines against the engaging pin. The low contact force reduces the effectiveness of the wiping action of the socket tines against the pin. The observed failure mode may be produced when insufficient wiping during mate, demate and small relative movement in use allows for the accumulation of debris or insulating films that electrically separate the contact pair. The investigation identified at least three manufacturing process control problems associated with the socket contacts that enabled shipment of contacts susceptible to developing low contact forces: (1) Improper heat treatment of the socket tines resulting in plastic rather than elastic behavior; (2) Overly thinned socket tines at their base resulting in reduced pin retention forces; (3) insufficient screening tests to identify parts susceptible to the aforementioned failure mechanisms. The results from an extensive screening program of socket contacts utilizing the industry standard contact separation force test procedures are described herein. The investigation shows this method to be capable of identifying initially weak sockets. However, sockets whose contact retention forces may degrade during use may not be screened out by pin retention testing alone. Further investigations are required to correlate low contact retention forces with increased electrical contact resistance in the presence of insulating films that may accumulate in the use environment.

78 FR 68100 - Luminant Generation Company, LLC

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-13

... following methods: Federal Rulemaking Web site: Go to http://www.regulations.gov and search for Docket ID.../adams.html . To begin the search, select ``ADAMS Public Documents'' and then select ``Begin Web- based ADAMS Search.'' For problems with ADAMS, please contact the NRC's Public Document Room (PDR) reference...

Numerical analysis of some problems related to the mechanics of pneumatic tires: Finite deformation/rolling contact of a viscoelastic cylinder and finite deformation of cord-reinforced rubber composites

NASA Technical Reports Server (NTRS)

Oden, J. T.; Becker, E. B.; Lin, T. L.; Hsieh, K. T.

1984-01-01

The formulation and numerical analysis of several problems related to the behavior of pneumatic tires are considered. These problems include the general rolling contact problem of a rubber-like viscoelastic cylinder undergoing finite deformations and the finite deformation of cord-reinforced rubber composites. New finite element models are developed for these problems. Numerical results obtained for several representative cases are presented.

Analysis of contact zones from whole field isochromatics using reflection photoelasticity

NASA Astrophysics Data System (ADS)

Hariprasad, M. P.; Ramesh, K.

2018-06-01

This paper discusses the method for evaluating the unknown contact parameters by post processing the whole field fringe order data obtained from reflection photoelasticity in a nonlinear least squares sense. Recent developments in Twelve Fringe Photoelasticity (TFP) for fringe order evaluation from single isochromatics is utilized for the whole field fringe order evaluation. One of the issues in using TFP for reflection photoelasticity is the smudging of isochromatic data at the contact zone. This leads to error in identifying the origin of contact, which is successfully addressed by implementing a semi-automatic contact point refinement algorithm. The methodologies are initially verified for benchmark problems and demonstrated for two application problems of turbine blade and sheet pile contacting interfaces.

Une formulation variationnelle du problème de contact avec frottement de Coulomb

NASA Astrophysics Data System (ADS)

Le van, Anh; Nguyen, Tai H. T.

2008-07-01

A variational relationship is proposed as the weak form of the large deformation contact problem with Coulomb friction. It is a mixed relationship involving both the displacements and the multipliers; the weighting functions are the virtual displacements and the virtual multipliers. It is shown that the proposed weak form is equivalent to the strong form of the initial/boundary value contact problem and the multipliers are equal to the contact tractions. To cite this article: A. Le van, T.H.T. Nguyen, C. R. Mecanique 336 (2008).

The method of segmentation of leukocytes in information-measuring systems on the basis of light microscopy

NASA Astrophysics Data System (ADS)

Nikitaev, V. G.; Pronichev, A. N.; Polyakov, E. V.; Zaharenko, Yu V.

2018-01-01

The paper considers the problem of leukocytes segmentation in microscopic images of bone marrow smears for automated diagnosis of the blood system diseases. The method was proposed to solve the problem of segmentation of contacting leukocytes in images of bone marrow smears. The method is based on the analysis of structure of objects of a separation and distances filter in combination with the watershed method and distance transformation method.

Recognition and treatment of psychological disorders during military service in the UK armed forces: a study of war pensioners.

PubMed

Brewin, Chris R; Andrews, Bernice; Hejdenberg, Jennie

2012-12-01

Little is known about the detection and treatment of psychological disorders arising during military service. We investigated whether personnel who developed disorders while serving in the UK armed forces came to the attention of medical services for these problems, received corresponding diagnoses, and were treated. For this retrospective record-based study 132 veterans in receipt of a war pension for psychological or physical problems received a lifetime diagnostic interview. Those with onsets of PTSD, depression, or alcohol abuse while in service were compared with those who never developed any condition or only developed it after discharge. Their medical records were inspected for contemporaneous contacts, diagnoses, and treatment. PTSD and depression, but not alcohol abuse, were independently associated with mental health contacts while in service. The median time from PTSD onset to first contact was 1 month. Under half of personnel meeting criteria for these disorders received a corresponding diagnosis, and alcohol abuse was more likely to be recognised in the context of comorbid PTSD. PTSD was as well recognised in earlier as in later years covered by the study. Most personnel with disorders received treatment, and those treated were more likely to be medically downgraded or discharged. War pensioners are more likely than not to have had their psychological problems acknowledged and treated while in service. The fact that these problems are still largely present 10 years later raises questions over the continuity of care associated with the transition to civilian life.

Effects of radiation, acid, and base on the extractant dihexyl-(diethylcarbamoyl)methyl) phosphonate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bahner, C.T.; Shoun, R.R.; McDowell, W.J.

1981-11-01

The effects of exposure to gamma radiation (/sup 60/Co) and of contact with acidic and basic aqueous solutions on dihexyl((diethylcarbamoyl)methyl)phosphonate (DHDECMP) were studied. Gamma radiation decomposes DHDECMP into a variety of products. The most troublesome of those are the acidic compounds that cause problems in stripping the actinides and lanthanides from the extractant at low acid concentrations. The rate of degradation of DHDECMP by radiation is about the same or only slightly higher than that of tri-n-butyl phosphate (TBP). It is relatively easy to remove the radiation-produced impurities by equilibration (scrubbing) with sodium carbonate or sodium hydroxide or by columnmore » chromatographic methods. The hydrolysis of DHDECMP in contact with aqueous solutions containing less than 3 M HNO/sub 3/ is not more severe than that of TBP under the same conditions but is significant above that acid concentration. Hydrolysis of DHDECMP in contact with aqueous sodium hydroxide solution does occur, but it should not pose an important problem with the short contact times such as those anticipated for the removal of the radiation-induced degradation products by caustic scrubbing. Results of various chromatographic tests to characterize the degradation products of DHDECMP are also given.« less

Traction behavior of two traction lubricants

NASA Technical Reports Server (NTRS)

Loewenthal, S. H.; Rohn, D. A.

1983-01-01

In the analysis of rolling-sliding concentrated contacts, such as gears, bearings and traction drives, the traction characteristics of the lubricant are of prime importance. The elastic shear modulus and limiting shear stress properties of the lubricant dictate the traction/slip characteristics and power loss associated with an EHD contact undergoing slip and/or spin. These properties can be deducted directly from the initial slope m and maximum traction coefficient micron of an experimental traction curve. In this investigation, correlation equations are presented to predict m and micron for two modern traction fluids based on the regression analysis of 334 separate traction disk machine experiments. The effects of contact pressure, temperature, surface velocity, ellipticity ratio are examined. Problems in deducing lubricant shear moduli from disk machine tests are discussed.

Multimaterial topology optimization of contact problems using phase field regularization

NASA Astrophysics Data System (ADS)

Myśliński, Andrzej

2018-01-01

The numerical method to solve multimaterial topology optimization problems for elastic bodies in unilateral contact with Tresca friction is developed in the paper. The displacement of the elastic body in contact is governed by elliptic equation with inequality boundary conditions. The body is assumed to consists from more than two distinct isotropic elastic materials. The materials distribution function is chosen as the design variable. Since high contact stress appears during the contact phenomenon the aim of the structural optimization problem is to find such topology of the domain occupied by the body that the normal contact stress along the boundary of the body is minimized. The original cost functional is regularized using the multiphase volume constrained Ginzburg-Landau energy functional rather than the perimeter functional. The first order necessary optimality condition is recalled and used to formulate the generalized gradient flow equations of Allen-Cahn type. The optimal topology is obtained as the steady state of the phase transition governed by the generalized Allen-Cahn equation. As the interface width parameter tends to zero the transition of the phase field model to the level set model is studied. The optimization problem is solved numerically using the operator splitting approach combined with the projection gradient method. Numerical examples confirming the applicability of the proposed method are provided and discussed.

Contact Lenses on Submarines

DTIC Science & Technology

1985-04-29

speculate why no medical eye problems occurred. There are two possible reasons. One is the degree of patient education and adherence to instructions...Management of this situation can only be accomplished through continuing patient education . Contact lens wearers should also be aware of the problem

A new solution method for wheel/rail rolling contact.

PubMed

Yang, Jian; Song, Hua; Fu, Lihua; Wang, Meng; Li, Wei

2016-01-01

To solve the problem of wheel/rail rolling contact of nonlinear steady-state curving, a three-dimensional transient finite element (FE) model is developed by the explicit software ANSYS/LS-DYNA. To improve the solving speed and efficiency, an explicit-explicit order solution method is put forward based on analysis of the features of implicit and explicit algorithm. The solution method was first applied to calculate the pre-loading of wheel/rail rolling contact with explicit algorithm, and then the results became the initial conditions in solving the dynamic process of wheel/rail rolling contact with explicit algorithm as well. Simultaneously, the common implicit-explicit order solution method is used to solve the FE model. Results show that the explicit-explicit order solution method has faster operation speed and higher efficiency than the implicit-explicit order solution method while the solution accuracy is almost the same. Hence, the explicit-explicit order solution method is more suitable for the wheel/rail rolling contact model with large scale and high nonlinearity.

An effective immunization strategy for airborne epidemics in modular and hierarchical social contact network

NASA Astrophysics Data System (ADS)

Song, Zhichao; Ge, Yuanzheng; Luo, Lei; Duan, Hong; Qiu, Xiaogang

2015-12-01

Social contact between individuals is the chief factor for airborne epidemic transmission among the crowd. Social contact networks, which describe the contact relationships among individuals, always exhibit overlapping qualities of communities, hierarchical structure and spatial-correlated. We find that traditional global targeted immunization strategy would lose its superiority in controlling the epidemic propagation in the social contact networks with modular and hierarchical structure. Therefore, we propose a hierarchical targeted immunization strategy to settle this problem. In this novel strategy, importance of the hierarchical structure is considered. Transmission control experiments of influenza H1N1 are carried out based on a modular and hierarchical network model. Results obtained indicate that hierarchical structure of the network is more critical than the degrees of the immunized targets and the modular network layer is the most important for the epidemic propagation control. Finally, the efficacy and stability of this novel immunization strategy have been validated as well.

Examining the role of Scotland's telephone advice service (NHS 24) for managing health in the community: analysis of routinely collected NHS 24 data

PubMed Central

Elliott, Alison M; McAteer, Anne; Heaney, David; Ritchie, Lewis D; Hannaford, Philip C

2015-01-01

Objectives To examine the type, duration and outcome of the symptoms and health problems Scotland's nurse-led telephone advice service (NHS 24) is contacted about and explore whether these vary by time of contact and patient characteristics. Design Analysis of routinely collected NHS 24 data. Setting Scotland, UK. Participants Users of NHS 24 during 2011. Main outcome measures Proportion of the type, duration and outcome of the symptoms and health problems NHS 24 is contacted about. Results 82.6% of the calls were made out-of-hours and 17.4% in-hours. Abdominal problems accounted for the largest proportion of calls (12.2%) followed by dental (6.8%) and rash/skin problems (6.0%). There were differences in the type of problems presented in-hours and out-of-hours. Most problems (62.9%) had lasted <24 h before people contacted NHS 24. Out-of-hours calls tended to be for problems of shorter duration. Problems reported out-of-hours most commonly resulted in advice to visit an out-of-hours centre and in-hours advice to contact a general practitioner. Most of the service users were female and from more affluent areas. Use of the service declined with age in those over 35 years. The characteristics of users varied according to when NHS 24 was contacted. The number of calls made by an individual in the year ranged from 1 to 866, although most users (69.2%) made only one call. The type of problem presented varied by age and deprivation, but was broadly similar by gender, rural/urban status and geographic area. Call outcomes also varied by user characteristics. Conclusions This is the first study to examine how the public uses NHS 24. It has identified the patterns of problems which the service must be equipped to deal with. It has also provided important information about who uses the service and when. This information will help future planning and development of the service. PMID:26310396

Prediction of protein long-range contacts using an ensemble of genetic algorithm classifiers with sequence profile centers.

PubMed

Chen, Peng; Li, Jinyan

2010-05-17

Prediction of long-range inter-residue contacts is an important topic in bioinformatics research. It is helpful for determining protein structures, understanding protein foldings, and therefore advancing the annotation of protein functions. In this paper, we propose a novel ensemble of genetic algorithm classifiers (GaCs) to address the long-range contact prediction problem. Our method is based on the key idea called sequence profile centers (SPCs). Each SPC is the average sequence profiles of residue pairs belonging to the same contact class or non-contact class. GaCs train on multiple but different pairs of long-range contact data (positive data) and long-range non-contact data (negative data). The negative data sets, having roughly the same sizes as the positive ones, are constructed by random sampling over the original imbalanced negative data. As a result, about 21.5% long-range contacts are correctly predicted. We also found that the ensemble of GaCs indeed makes an accuracy improvement by around 5.6% over the single GaC. Classifiers with the use of sequence profile centers may advance the long-range contact prediction. In line with this approach, key structural features in proteins would be determined with high efficiency and accuracy.

78 FR 70964 - Luminant Generation Company, LLC

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-27

... search for Docket ID NRC-2008-0594. Address questions about NRC dockets to Carol Gallagher; telephone... at http://www.nrc.gov/reading-rm/adams.html . To begin the search, select ``ADAMS Public Documents'' and then select ``Begin Web- based ADAMS Search.'' For problems with ADAMS, please contact the NRC's...

76 FR 38621 - New England Fishery Management Council; Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-01

... Street, Mill 2, Newburyport, MA 01950. FOR FURTHER INFORMATION CONTACT: Paul J. Howard, Executive... Monkfish Advisory Panel (AP) will meet to develop a detailed problem statement based on the list of issues... other auxiliary aids should be directed to Paul J. Howard, Executive Director, at (978) 465- 0492, at...

Eulerian Formulation of Spatially Constrained Elastic Rods

NASA Astrophysics Data System (ADS)

Huynen, Alexandre

Slender elastic rods are ubiquitous in nature and technology. For a vast majority of applications, the rod deflection is restricted by an external constraint and a significant part of the elastic body is in contact with a stiff constraining surface. The research work presented in this doctoral dissertation formulates a computational model for the solution of elastic rods constrained inside or around frictionless tube-like surfaces. The segmentation strategy adopted to cope with this complex class of problems consists in sequencing the global problem into, comparatively simpler, elementary problems either in continuous contact with the constraint or contact-free between their extremities. Within the conventional Lagrangian formulation of elastic rods, this approach is however associated with two major drawbacks. First, the boundary conditions specifying the locations of the rod centerline at both extremities of each elementary problem lead to the establishment of isoperimetric constraints, i.e., integral constraints on the unknown length of the rod. Second, the assessment of the unilateral contact condition requires, in principle, the comparison of two curves parametrized by distinct curvilinear coordinates, viz. the rod centerline and the constraint axis. Both conspire to burden the computations associated with the method. To streamline the solution along the elementary problems and rationalize the assessment of the unilateral contact condition, the rod governing equations are reformulated within the Eulerian framework of the constraint. The methodical exploration of both types of elementary problems leads to specific formulations of the rod governing equations that stress the profound connection between the mechanics of the rod and the geometry of the constraint surface. The proposed Eulerian reformulation, which restates the rod local equilibrium in terms of the curvilinear coordinate associated with the constraint axis, describes the rod deformed configuration by means of either its relative position with respect to the constraint axis (contact-free segments) or its angular position on the constraint surface (continuous contacts.) This formulation circumvents both drawbacks that afflict the conventional Lagrangian approach associated with the segmentation strategy. As the a priori unknown domain, viz. the rod length, is substituted for the known constraint axis, the free boundary problem and the associated isoperimetric constraints are converted into a classical two-point boundary value problem. Additionally, the description of the rod deflection by means of its eccentricity with respect to the constraint axis trivializes the assessment of the unilateral contact condition. Along continuous contacts, this formulation expresses the strain variables, measuring the rod change of shape, in terms of the geometric invariants of the constraint surface, and emphasizes the influence of the constraint local geometry on the reaction pressure. Formalizing the segmentation strategy, a computational model that exploits the Eulerian formulation of the rod governing equations is devised. To solve the quasi-static deflection of elastic rods constrained inside or around a tube-like surface, this computational model identifies the number of contacts, their nature (either discrete or continuous), and the rod configuration at the connections that satisfies the unilateral contact condition and preserves the rod integrity along the sequence of elementary problems.

Serious Emotional and Behavioral Problems and Mental Health Contacts in American and British Children and Adolescents

ERIC Educational Resources Information Center

Mojtabai, Ramin

2006-01-01

Objective: To compare prevalence of serious emotional and behavioral problems and mental health contacts for these problems among American and British children and adolescents. Method: Data on children and adolescents ages 5 to 16 years were drawn from the 2004 U.S. National Health Interview Survey (response rate = 79.4%) and the 2004 survey of…

Comparison of various contact algorithms for poroelastic tissues.

PubMed

Galbusera, Fabio; Bashkuev, Maxim; Wilke, Hans-Joachim; Shirazi-Adl, Aboulfazl; Schmidt, Hendrik

2014-01-01

Capabilities of the commercial finite element package ABAQUS in simulating frictionless contact between two saturated porous structures were evaluated and compared with those of an open source code, FEBio. In ABAQUS, both the default contact implementation and another algorithm based on an iterative approach requiring script programming were considered. Test simulations included a patch test of two cylindrical slabs in a gapless contact and confined compression conditions; a confined compression test of a porous cylindrical slab with a spherical porous indenter; and finally two unconfined compression tests of soft tissues mimicking diarthrodial joints. The patch test showed almost identical results for all algorithms. On the contrary, the confined and unconfined compression tests demonstrated large differences related to distinct physical and boundary conditions considered in each of the three contact algorithms investigated in this study. In general, contact with non-uniform gaps between fluid-filled porous structures could be effectively simulated with either ABAQUS or FEBio. The user should be aware of the parameter definitions, assumptions and limitations in each case, and take into consideration the physics and boundary conditions of the problem of interest when searching for the most appropriate model.

VoroMQA: Assessment of protein structure quality using interatomic contact areas.

PubMed

Olechnovič, Kliment; Venclovas, Česlovas

2017-06-01

In the absence of experimentally determined protein structure many biological questions can be addressed using computational structural models. However, the utility of protein structural models depends on their quality. Therefore, the estimation of the quality of predicted structures is an important problem. One of the approaches to this problem is the use of knowledge-based statistical potentials. Such methods typically rely on the statistics of distances and angles of residue-residue or atom-atom interactions collected from experimentally determined structures. Here, we present VoroMQA (Voronoi tessellation-based Model Quality Assessment), a new method for the estimation of protein structure quality. Our method combines the idea of statistical potentials with the use of interatomic contact areas instead of distances. Contact areas, derived using Voronoi tessellation of protein structure, are used to describe and seamlessly integrate both explicit interactions between protein atoms and implicit interactions of protein atoms with solvent. VoroMQA produces scores at atomic, residue, and global levels, all in the fixed range from 0 to 1. The method was tested on the CASP data and compared to several other single-model quality assessment methods. VoroMQA showed strong performance in the recognition of the native structure and in the structural model selection tests, thus demonstrating the efficacy of interatomic contact areas in estimating protein structure quality. The software implementation of VoroMQA is freely available as a standalone application and as a web server at http://bioinformatics.lt/software/voromqa. Proteins 2017; 85:1131-1145. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Contact solution algorithms

NASA Technical Reports Server (NTRS)

Tielking, John T.

1989-01-01

Two algorithms for obtaining static contact solutions are described in this presentation. Although they were derived for contact problems involving specific structures (a tire and a solid rubber cylinder), they are sufficiently general to be applied to other shell-of-revolution and solid-body contact problems. The shell-of-revolution contact algorithm is a method of obtaining a point load influence coefficient matrix for the portion of shell surface that is expected to carry a contact load. If the shell is sufficiently linear with respect to contact loading, a single influence coefficient matrix can be used to obtain a good approximation of the contact pressure distribution. Otherwise, the matrix will be updated to reflect nonlinear load-deflection behavior. The solid-body contact algorithm utilizes a Lagrange multiplier to include the contact constraint in a potential energy functional. The solution is found by applying the principle of minimum potential energy. The Lagrange multiplier is identified as the contact load resultant for a specific deflection. At present, only frictionless contact solutions have been obtained with these algorithms. A sliding tread element has been developed to calculate friction shear force in the contact region of the rolling shell-of-revolution tire model.

Patterns and predictors of help-seeking contacts with health services and general practitioner detection of suicidality prior to suicide: a cohort analysis of suicides occurring over a two-year period.

PubMed

Leavey, Gerard; Rosato, Michael; Galway, Karen; Hughes, Lynette; Mallon, Sharon; Rondon, Janeet

2016-04-30

Contact with primary care and psychiatric services prior to suicide may be considerable, presenting opportunities for intervention. However, there is scant knowledge on the frequency, nature and determinants of contact. Retrospective cohort study-an analysis of deaths recorded as suicide by the Northern Ireland Coroner's Office linked with data from General Practice patient records over a 2 year period Eighty-seven per cent of suicides were in contact with General Practice services in the 12 months before suicide. The frequency of contact with services was considerable, particularly among patients with a common mental disorder or substance misuse problems. A diagnosis of psychiatric problems was absent in 40% of suicides. Excluding suicide attempts, the main predictors of a noted general practitioner concern for patient suicidality are male gender, frequency of consultations, diagnosis of mental illness and substance misuse. Despite widespread and frequent contact, a substantial proportion of suicidal people were undiagnosed and untreated for mental health problems. General Practitioner alertness to suicidality may be too narrowly focused.

Dynamic history-dependent variational-hemivariational inequalities with applications to contact mechanics

NASA Astrophysics Data System (ADS)

Migórski, Stanislaw; Ogorzaly, Justyna

2017-02-01

In the paper we deliver a new existence and uniqueness result for a class of abstract nonlinear variational-hemivariational inequalities which are governed by two operators depending on the history of the solution, and include two nondifferentiable functionals, a convex and a nonconvex one. Then, we consider an initial boundary value problem which describes a model of evolution of a viscoelastic body in contact with a foundation. The contact process is assumed to be dynamic, and the friction is described by subdifferential boundary conditions. Both the constitutive law and the contact condition involve memory operators. As an application of the abstract theory, we provide a result on the unique weak solvability of the contact problem.

Weak imposition of frictionless contact constraints on automatically recovered high-order, embedded interfaces using the finite cell method

NASA Astrophysics Data System (ADS)

Bog, Tino; Zander, Nils; Kollmannsberger, Stefan; Rank, Ernst

2018-04-01

The finite cell method (FCM) is a fictitious domain approach that greatly simplifies simulations involving complex structures. Recently, the FCM has been applied to contact problems. The current study continues in this field by extending the concept of weakly enforced boundary conditions to inequality constraints for frictionless contact. Furthermore, it formalizes an approach that automatically recovers high-order contact surfaces of (implicitly defined) embedded geometries by means of an extended Marching Cubes algorithm. To further improve the accuracy of the discretization, irregularities at the boundary of contact zones are treated with multi-level hp-refinements. Numerical results and a systematic study of h-, p- and hp-refinements show that the FCM can efficiently provide accurate results for problems involving contact.

Characterizing and Discovering Spatiotemporal Social Contact Patterns for Healthcare.

PubMed

Yang, Bo; Pei, Hongbin; Chen, Hechang; Liu, Jiming; Xia, Shang

2017-08-01

During an epidemic, the spatial, temporal and demographic patterns of disease transmission are determined by multiple factors. In addition to the physiological properties of the pathogens and hosts, the social contact of the host population, which characterizes the reciprocal exposures of individuals to infection according to their demographic structure and various social activities, are also pivotal to understanding and predicting the prevalence of infectious diseases. How social contact is measured will affect the extent to which we can forecast the dynamics of infections in the real world. Most current work focuses on modeling the spatial patterns of static social contact. In this work, we use a novel perspective to address the problem of how to characterize and measure dynamic social contact during an epidemic. We propose an epidemic-model-based tensor deconvolution framework in which the spatiotemporal patterns of social contact are represented by the factors of the tensors. These factors can be discovered using a tensor deconvolution procedure with the integration of epidemic models based on rich types of data, mainly heterogeneous outbreak surveillance data, socio-demographic census data and physiological data from medical reports. Using reproduction models that include SIR/SIS/SEIR/SEIS models as case studies, the efficacy and applications of the proposed framework are theoretically analyzed, empirically validated and demonstrated through a set of rigorous experiments using both synthetic and real-world data.

On contact problems of elasticity theory

NASA Technical Reports Server (NTRS)

Kalandiya, A. I.

1986-01-01

Certain contact problems are reviewed in the two-dimensional theory of elasticity when round bodies touch without friction along most of the boundary and, therefore, Herz' hypothesis on the smallness of the contact area cannot be used. Fundamental equations were derived coinciding externally with the equation in the theory of a finite-span wing with unkown parameter. These equations are solved using Multhopp's well-known technique, and numerical calculations are performed in specific examples.

Field-gradient partitioning for fracture and frictional contact in the material point method: Field-gradient partitioning for fracture and frictional contact in the material point method [Fracture and frictional contact in material point method using damage-field gradients for velocity-field partitioning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Homel, Michael A.; Herbold, Eric B.

Contact and fracture in the material point method require grid-scale enrichment or partitioning of material into distinct velocity fields to allow for displacement or velocity discontinuities at a material interface. We present a new method which a kernel-based damage field is constructed from the particle data. The gradient of this field is used to dynamically repartition the material into contact pairs at each node. Our approach avoids the need to construct and evolve explicit cracks or contact surfaces and is therefore well suited to problems involving complex 3-D fracture with crack branching and coalescence. A straightforward extension of this approachmore » permits frictional ‘self-contact’ between surfaces that are initially part of a single velocity field, enabling more accurate simulation of granular flow, porous compaction, fragmentation, and comminution of brittle materials. Finally, numerical simulations of self contact and dynamic crack propagation are presented to demonstrate the accuracy of the approach.« less

On the physically based modeling of surface tension and moving contact lines with dynamic contact angles on the continuum scale

NASA Astrophysics Data System (ADS)

Huber, M.; Keller, F.; Säckel, W.; Hirschler, M.; Kunz, P.; Hassanizadeh, S. M.; Nieken, U.

2016-04-01

The description of wetting phenomena is a challenging problem on every considerable length-scale. The behavior of interfaces and contact lines on the continuum scale is caused by intermolecular interactions like the Van der Waals forces. Therefore, to describe surface tension and the resulting dynamics of interfaces and contact lines on the continuum scale, appropriate formulations must be developed. While the Continuum Surface Force (CSF) model is well-engineered for the description of interfaces, there is still a lack of treatment of contact lines, which are defined by the intersection of an ending fluid interface and a solid boundary surface. In our approach we use a balance equation for the contact line and extend the Navier-Stokes equations in analogy to the extension of a two-phase interface in the CSF model. Since this model depicts a physically motivated approach on the continuum scale, no fitting parameters are introduced and the deterministic description leads to a dynamical evolution of the system. As verification of our theory, we show a Smoothed Particle Hydrodynamics (SPH) model and simulate the evolution of droplet shapes and their corresponding contact angles.

Field-gradient partitioning for fracture and frictional contact in the material point method: Field-gradient partitioning for fracture and frictional contact in the material point method [Fracture and frictional contact in material point method using damage-field gradients for velocity-field partitioning

DOE PAGES

Homel, Michael A.; Herbold, Eric B.

2016-08-15

Contact and fracture in the material point method require grid-scale enrichment or partitioning of material into distinct velocity fields to allow for displacement or velocity discontinuities at a material interface. We present a new method which a kernel-based damage field is constructed from the particle data. The gradient of this field is used to dynamically repartition the material into contact pairs at each node. Our approach avoids the need to construct and evolve explicit cracks or contact surfaces and is therefore well suited to problems involving complex 3-D fracture with crack branching and coalescence. A straightforward extension of this approachmore » permits frictional ‘self-contact’ between surfaces that are initially part of a single velocity field, enabling more accurate simulation of granular flow, porous compaction, fragmentation, and comminution of brittle materials. Finally, numerical simulations of self contact and dynamic crack propagation are presented to demonstrate the accuracy of the approach.« less

Contact and crack problems for an elastic wedge. [stress concentration in elastic half spaces

NASA Technical Reports Server (NTRS)

Erdogan, F.; Gupta, G. D.

1974-01-01

The contact and the crack problems for an elastic wedge of arbitrary angle are considered. The problem is reduced to a singular integral equation which, in the general case, may have a generalized Cauchy kernel. The singularities under the stamp as well as at the wedge apex were studied, and the relevant stress intensity factors are defined. The problem was solved for various wedge geometries and loading conditions. The results may be applicable to certain foundation problems and to crack problems in symmetrically loaded wedges in which cracks initiate from the apex.

Subsurface Stress Fields in FCC Single Crystal Anisotropic Contacts

NASA Technical Reports Server (NTRS)

Arakere, Nagaraj K.; Knudsen, Erik; Swanson, Gregory R.; Duke, Gregory; Ham-Battista, Gilda

2004-01-01

Single crystal superalloy turbine blades used in high pressure turbomachinery are subject to conditions of high temperature, triaxial steady and alternating stresses, fretting stresses in the blade attachment and damper contact locations, and exposure to high-pressure hydrogen. The blades are also subjected to extreme variations in temperature during start-up and shutdown transients. The most prevalent high cycle fatigue (HCF) failure modes observed in these blades during operation include crystallographic crack initiation/propagation on octahedral planes, and non-crystallographic initiation with crystallographic growth. Numerous cases of crack initiation and crack propagation at the blade leading edge tip, blade attachment regions, and damper contact locations have been documented. Understanding crack initiation/propagation under mixed-mode loading conditions is critical for establishing a systematic procedure for evaluating HCF life of single crystal turbine blades. This paper presents analytical and numerical techniques for evaluating two and three dimensional subsurface stress fields in anisotropic contacts. The subsurface stress results are required for evaluating contact fatigue life at damper contacts and dovetail attachment regions in single crystal nickel-base superalloy turbine blades. An analytical procedure is presented for evaluating the subsurface stresses in the elastic half-space, based on the adaptation of a stress function method outlined by Lekhnitskii. Numerical results are presented for cylindrical and spherical anisotropic contacts, using finite element analysis (FEA). Effects of crystal orientation on stress response and fatigue life are examined. Obtaining accurate subsurface stress results for anisotropic single crystal contact problems require extremely refined three-dimensional (3-D) finite element grids, especially in the edge of contact region. Obtaining resolved shear stresses (RSS) on the principal slip planes also involves considerable post-processing work. For these reasons it is very advantageous to develop analytical solution schemes for subsurface stresses, whenever possible.

High-Throughput Non-Contact Vitrification of Cell-Laden Droplets Based on Cell Printing

NASA Astrophysics Data System (ADS)

Shi, Meng; Ling, Kai; Yong, Kar Wey; Li, Yuhui; Feng, Shangsheng; Zhang, Xiaohui; Pingguan-Murphy, Belinda; Lu, Tian Jian; Xu, Feng

2015-12-01

Cryopreservation is the most promising way for long-term storage of biological samples e.g., single cells and cellular structures. Among various cryopreservation methods, vitrification is advantageous by employing high cooling rate to avoid the formation of harmful ice crystals in cells. Most existing vitrification methods adopt direct contact of cells with liquid nitrogen to obtain high cooling rates, which however causes the potential contamination and difficult cell collection. To address these limitations, we developed a non-contact vitrification device based on an ultra-thin freezing film to achieve high cooling/warming rate and avoid direct contact between cells and liquid nitrogen. A high-throughput cell printer was employed to rapidly generate uniform cell-laden microdroplets into the device, where the microdroplets were hung on one side of the film and then vitrified by pouring the liquid nitrogen onto the other side via boiling heat transfer. Through theoretical and experimental studies on vitrification processes, we demonstrated that our device offers a high cooling/warming rate for vitrification of the NIH 3T3 cells and human adipose-derived stem cells (hASCs) with maintained cell viability and differentiation potential. This non-contact vitrification device provides a novel and effective way to cryopreserve cells at high throughput and avoid the contamination and collection problems.

High-Throughput Non-Contact Vitrification of Cell-Laden Droplets Based on Cell Printing

PubMed Central

Shi, Meng; Ling, Kai; Yong, Kar Wey; Li, Yuhui; Feng, Shangsheng; Zhang, Xiaohui; Pingguan-Murphy, Belinda; Lu, Tian Jian; Xu, Feng

2015-01-01

Cryopreservation is the most promising way for long-term storage of biological samples e.g., single cells and cellular structures. Among various cryopreservation methods, vitrification is advantageous by employing high cooling rate to avoid the formation of harmful ice crystals in cells. Most existing vitrification methods adopt direct contact of cells with liquid nitrogen to obtain high cooling rates, which however causes the potential contamination and difficult cell collection. To address these limitations, we developed a non-contact vitrification device based on an ultra-thin freezing film to achieve high cooling/warming rate and avoid direct contact between cells and liquid nitrogen. A high-throughput cell printer was employed to rapidly generate uniform cell-laden microdroplets into the device, where the microdroplets were hung on one side of the film and then vitrified by pouring the liquid nitrogen onto the other side via boiling heat transfer. Through theoretical and experimental studies on vitrification processes, we demonstrated that our device offers a high cooling/warming rate for vitrification of the NIH 3T3 cells and human adipose-derived stem cells (hASCs) with maintained cell viability and differentiation potential. This non-contact vitrification device provides a novel and effective way to cryopreserve cells at high throughput and avoid the contamination and collection problems. PMID:26655688

Challenges to be overcome using population-based sampling methods to recruit veterans for a study of post-traumatic stress disorder and traumatic brain injury.

PubMed

Bayley, Peter J; Kong, Jennifer Y; Helmer, Drew A; Schneiderman, Aaron; Roselli, Lauren A; Rosse, Stephanie M; Jackson, Jordan A; Baldwin, Janet; Isaac, Linda; Nolasco, Michael; Blackman, Marc R; Reinhard, Matthew J; Ashford, John Wesson; Chapman, Julie C

2014-04-08

Many investigators are interested in recruiting veterans from recent conflicts in Afghanistan and Iraq with Traumatic Brain Injury (TBI) and/or Post Traumatic Stress Disorder (PTSD). Researchers pursuing such studies may experience problems in recruiting sufficient numbers unless effective strategies are used. Currently, there is very little information on recruitment strategies for individuals with TBI and/or PTSD. It is known that groups of patients with medical conditions may be less likely to volunteer for clinical research. This study investigated the feasibility of recruiting veterans returning from recent military conflicts--Operation Enduring Freedom (OEF) and Operation Iraqi Freedom (OIF)--using a population-based sampling method. Individuals were sampled from a previous epidemiological study. Three study sites focused on recruiting survey respondents (n = 445) who lived within a 60 mile radius of one of the sites. Overall, the successful recruitment of veterans using a population-based sampling method was dependent on the ability to contact potential participants following mass mailing. Study enrollment of participants with probable TBI and/or PTSD had a recruitment yield (enrolled/total identified) of 5.4%. We were able to contact 146 individuals, representing a contact rate of 33%. Sixty-six of the individuals contacted were screened. The major reasons for not screening included a stated lack of interest in the study (n = 37), a failure to answer screening calls after initial contact (n = 30), and an unwillingness or inability to travel to a study site (n = 10). Based on the phone screening, 36 veterans were eligible for the study. Twenty-four veterans were enrolled, (recruitment yield = 5.4%) and twelve were not enrolled for a variety of reasons. Our experience with a population-based sampling method for recruitment of recent combat veterans illustrates the challenges encountered, particularly contacting and screening potential participants. The screening and enrollment data will help guide recruitment for future studies using population-based methods.

The inverse problem for definition of the shape of a molten contact bridge

NASA Astrophysics Data System (ADS)

Kharin, Stanislav N.; Sarsengeldin, Merey M.

2017-09-01

The paper presents the results of investigation of bridging phenomenon occurring at opening of electrical contacts. The mathematical model describing the dynamics of metal molten bridge takes into account the Thomson effect. It is based on the system of partial differential equations for temperature and electrical fields of the bridge in the domain containing two moving unknown boundaries. One of them is an interface between liquid and solid zones of the bridge and should be found by the solution of the corresponding Stefan problem. The second free boundary corresponds to the shape of the visible part of a bridge. Its definition is an inverse problem, for which solution it is necessary to find minimum of the energy consuming for the formation of the shape of a quasi-stationary bridge. Three components of this energy, namely surface tension, pinch effect and gravitation, are defined by the functional which minimum gives the required shape of the bridge. The solution of corresponding variation problem is found by the reduction of the problem to the solution of the system of ordinary differential equations. Calculated values of the voltage of the bridge rupture for various metals are in a good agreement with the experimental data. The criteria responsible for the mechanism of molten bridge rupture are introduced in the paper.

International Symposium on Numerical Methods in Engineering, 5th, Ecole Polytechnique Federale de Lausanne, Switzerland, Sept. 11-15, 1989, Proceedings. Volumes 1 & 2

NASA Astrophysics Data System (ADS)

Gruber, Ralph; Periaux, Jaques; Shaw, Richard Paul

Recent advances in computational mechanics are discussed in reviews and reports. Topics addressed include spectral superpositions on finite elements for shear banding problems, strain-based finite plasticity, numerical simulation of hypersonic viscous continuum flow, constitutive laws in solid mechanics, dynamics problems, fracture mechanics and damage tolerance, composite plates and shells, contact and friction, metal forming and solidification, coupling problems, and adaptive FEMs. Consideration is given to chemical flows, convection problems, free boundaries and artificial boundary conditions, domain-decomposition and multigrid methods, combustion and thermal analysis, wave propagation, mixed and hybrid FEMs, integral-equation methods, optimization, software engineering, and vector and parallel computing.

Teacher-Student Sexual Relations: Key Risks and Ethical Issues

ERIC Educational Resources Information Center

Sikes, Pat

2010-01-01

Researching actual or purported sexual contact between teachers and students raises many difficult ethical issues, questions and dilemmas, which may help to explain why few have ventured into the field. This experientially based paper addresses key problem areas under the headings of: the ethics of researching a sensitive taboo topic; the ethics…

Protecting residences from wildfires: a guide for homeowners, lawmakers, and planners

Treesearch

Howard E. Moore

1981-01-01

This guide, based on a literature review and personal contacts, offers recommendations and standards for procedures in reducing losses of residences from wildfires. Possible solutions to the problem of fire protection are discussed in the broad areas of land-use planning and zoning, property development, structural design and construction, landscaping, accessories,...

78 FR 7818 - Duane Arnold Energy Center; Application for Amendment to Facility Operating License

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-04

... methods: Federal Rulemaking Web site: Go to http://www.regulations.gov and search for Docket ID NRC-2013... search, select ``ADAMS Public Documents'' and then select ``Begin Web- based ADAMS Search.'' For problems... INFORMATION CONTACT: Karl D. Feintuch, Project Manager, Office of Nuclear Reactor Regulation, U.S. Nuclear...

77 FR 67837 - Callaway Plant, Unit 1; Application for Amendment to Facility Operating License

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-14

... methods: Federal Rulemaking Web site: Go to http://www.regulations.gov and search for Docket ID NRC-2012... search, select ``ADAMS Public Documents'' and then select ``Begin Web- based ADAMS Search.'' For problems... INFORMATION CONTACT: Carl F. Lyon, Project Manager, Office of Nuclear Reactor Regulation, U.S. Nuclear...

A New Remote Health-Care System Based on Moving Robot Intended for the Elderly at Home

PubMed Central

Zhou, Bing; Wu, Kaige; Wang, Jing; Chen, Gang; Ji, Bo; Liu, Siying

2018-01-01

Nowadays, due to the growing need for remote care and the constantly increasing popularity of mobile devices, a large amount of mobile applications for remote care support has been developed. Although mobile phones are very suitable for young people, there are still many problems related to remote health care of the elderly. Due to hearing loss or limited movements, it is difficult for the elderly to contact their families or doctors via real-time video call. In this paper, we introduce a new remote health-care system based on moving robots intended for the elderly at home. Since the proposed system is an online system, the elderly can contact their families and doctors quickly anytime and anywhere. Besides call, our system involves the accurate indoor object detection algorithms and automatic health data collection, which are not included in existing remote care systems. Therefore, the proposed system solves some challenging problems related to the elderly care. The experiment has shown that the proposed care system achieves excellent performance and provides good user experience. PMID:29599949

Laser speckle decorrelation for fingerprint acquisition

NASA Astrophysics Data System (ADS)

Schirripa Spagnolo, Giuseppe; Cozzella, Lorenzo

2012-09-01

Biometry is gaining popularity as a physical security approach in situations where a high level of security is necessary. Currently, biometric solutions are embedded in a very large and heterogeneous group of applications. One of the most sensible is for airport security access to boarding gates. More airports are introducing biometric solutions based on face, fingerprint or iris recognition for passenger identification. In particular, fingerprints are the most widely used biometric, and they are mandatorily included in electronic identification documents. One important issue, which is difficult to address in traditional fingerprint acquisition systems, is preventing contact between subsequent users; sebum, which can be a potential vector for contagious diseases. Currently, non-contact devices are used to overcome this problem. In this paper, a new contact device based on laser speckle decorrelation is presented. Our system has the advantage of being compact and low-cost compared with an actual contactless system, allowing enhancement of the sebum pattern imaging contrast in a simple and low-cost way. Furthermore, it avoids the spreading of contagious diseases.

Contact-assisted protein structure modeling by global optimization in CASP11.

PubMed

Joo, Keehyoung; Joung, InSuk; Cheng, Qianyi; Lee, Sung Jong; Lee, Jooyoung

2016-09-01

We have applied the conformational space annealing method to the contact-assisted protein structure modeling in CASP11. For Tp targets, where predicted residue-residue contact information was provided, the contact energy term in the form of the Lorentzian function was implemented together with the physical energy terms used in our template-free modeling of proteins. Although we observed some structural improvement of Tp models over the models predicted without the Tp information, the improvement was not substantial on average. This is partly due to the inaccuracy of the provided contact information, where only about 18% of it was correct. For Ts targets, where the information of ambiguous NOE (Nuclear Overhauser Effect) restraints was provided, we formulated the modeling in terms of the two-tier optimization problem, which covers: (1) the assignment of NOE peaks and (2) the three-dimensional (3D) model generation based on the assigned NOEs. Although solving the problem in a direct manner appears to be intractable at first glance, we demonstrate through CASP11 that remarkably accurate protein 3D modeling is possible by brute force optimization of a relevant energy function. For 19 Ts targets of the average size of 224 residues, generated protein models were of about 3.6 Å Cα atom accuracy. Even greater structural improvement was observed when additional Tc contact information was provided. For 20 out of the total 24 Tc targets, we were able to generate protein structures which were better than the best model from the rest of the CASP11 groups in terms of GDT-TS. Proteins 2016; 84(Suppl 1):189-199. © 2015 Wiley Periodicals, Inc. © 2015 Wiley Periodicals, Inc.

Evaluation of coupling approaches for thermomechanical simulations

DOE PAGES

Novascone, S. R.; Spencer, B. W.; Hales, J. D.; ...

2015-08-10

Many problems of interest, particularly in the nuclear engineering field, involve coupling between the thermal and mechanical response of an engineered system. The strength of the two-way feedback between the thermal and mechanical solution fields can vary significantly depending on the problem. Contact problems exhibit a particularly high degree of two-way feedback between those fields. This paper describes and demonstrates the application of a flexible simulation environment that permits the solution of coupled physics problems using either a tightly coupled approach or a loosely coupled approach. In the tight coupling approach, Newton iterations include the coupling effects between all physics,more » while in the loosely coupled approach, the individual physics models are solved independently, and fixed-point iterations are performed until the coupled system is converged. These approaches are applied to simple demonstration problems and to realistic nuclear engineering applications. The demonstration problems consist of single and multi-domain thermomechanics with and without thermal and mechanical contact. Simulations of a reactor pressure vessel under pressurized thermal shock conditions and a simulation of light water reactor fuel are also presented. Here, problems that include thermal and mechanical contact, such as the contact between the fuel and cladding in the fuel simulation, exhibit much stronger two-way feedback between the thermal and mechanical solutions, and as a result, are better solved using a tight coupling strategy.« less

Problem-solving in caregiver-counselling (PLiP Study): study protocol of a cluster randomized pragmatic trial.

PubMed

Pfeiffer, Klaus; Hautzinger, Martin; Patak, Margarete; Grünwald, Julia; Becker, Clemens; Albrecht, Diana

2017-03-06

Despite the positive evaluation of various caregiver interventions over the past 3 decades, only very few intervention protocols have been translated to delivery in service contexts. The purpose of this study is to train care counsellors of statutory long term care insurances in problem-solving and to evaluate this approach as an additional component in the statutory care counselling in Germany. A pragmatic cluster randomized controlled trial in which 38 sites with 58 care counsellors are randomly assigned to provide either routine counselling plus additional problem-solving for caregivers or routine counselling alone. The counsellor training comprises an initial 2-day training, a follow-up day after 4 months, and biweekly supervision contacts with a psychotherapist for 6 months over the phone. The agreed minimum counselling intensity is one initial face-to-face contact including a caregiver assessment and at least one telephone follow-up contact. Caregivers who are positively screened for significant strain in their role are followed up at 3 and 6 months after baseline assessment. Main outcome are caregivers' depressive symptoms. While it is unclear if the expected very low amount of additional counselling time is sufficient to yield any additional effects on caregiver depression, it is also unclear if the additional problem-solving component yields to synergies with routine counselling that is based on information and case management. There are different potential individual and organisational barriers to a consistent intervention delivery like gratification for participation, time for extra work or internal motivation to participate. ( ISRCTN23635523 ).

Investigation of transient temperature's influence on damage of high-speed sliding electrical contact rail surface

NASA Astrophysics Data System (ADS)

Zhang, Yuyan; Sun, Shasha; Guo, Quanli; Yang, Degong; Sun, Dongtao

2016-11-01

In the high speed sliding electrical contact with large current, the temperature of contact area rises quickly under the coupling action of the friction heating, the Joule heating and electric arc heating. The rising temperature seriously affects the conductivity of the components and the yield strength of materials, as well affects the contact state and lead to damage, so as to shorten the service life of the contact elements. Therefore, there is vital significance to measure the temperature accurately and investigate the temperature effect on damage of rail surface. Aiming at the problem of components damage in high speed sliding electrical contact, the transient heat effect on the contact surface was explored and its influence and regularity on the sliding components damage was obtained. A kind of real-time temperature measurement method on rail surface of high speed sliding electrical contact is proposed. Under the condition of 2.5 kA current load, based on the principle of infrared radiation non-contact temperature sensor was used to measure the rail temperature. The dynamic distribution of temperature field was obtained through the simulation analysis, further, the connection between temperature changes and the rail surface damage morphology, the damage volume was analyzed and established. Finally, the method to reduce rail damage and improve the life of components by changing the temperature field was discussed.

Pain in general practice. Pain as a cause of patient-doctor contact.

PubMed

Frølund, F; Frølund, C

1986-05-01

In 1983 26 general practitioners in a Danish provincial town made a week's survey of pain as the main cause of patient-doctor contact during the day time. The population served was 45 000-50 000 persons of all ages. Coexistent pain which was not the cause of actual contact was not recorded. Out of 2 886 contacts of all causes 641 were due to pain (22% or 222/1 000 contacts). Percentages for acute and chronic pain were 61 and 39 respectively. The commonest causes of pain were musculo-skeletal (50%), visceral including cardio-vascular (20%), infectious (15%), and headaches (8%). The overall female: male ratio was 1.5: 1, but with considerable variation within the different pain categories. The ratios for acute and chronic pain were 1.4: 1 and 1.8: 1 respectively. About one hundred contacts were recorded as "problem cases" whose predominant complaints were low back pain, headaches, and visceral pain. Pain--especially chronic pain with a non-malignant cause--is a major problem in general practice. Essentially, pain is a primary health care problem and research in this field should be encouraged.

Real-time simulation of contact and cutting of heterogeneous soft-tissues.

PubMed

Courtecuisse, Hadrien; Allard, Jérémie; Kerfriden, Pierre; Bordas, Stéphane P A; Cotin, Stéphane; Duriez, Christian

2014-02-01

This paper presents a numerical method for interactive (real-time) simulations, which considerably improves the accuracy of the response of heterogeneous soft-tissue models undergoing contact, cutting and other topological changes. We provide an integrated methodology able to deal both with the ill-conditioning issues associated with material heterogeneities, contact boundary conditions which are one of the main sources of inaccuracies, and cutting which is one of the most challenging issues in interactive simulations. Our approach is based on an implicit time integration of a non-linear finite element model. To enable real-time computations, we propose a new preconditioning technique, based on an asynchronous update at low frequency. The preconditioner is not only used to improve the computation of the deformation of the tissues, but also to simulate the contact response of homogeneous and heterogeneous bodies with the same accuracy. We also address the problem of cutting the heterogeneous structures and propose a method to update the preconditioner according to the topological modifications. Finally, we apply our approach to three challenging demonstrators: (i) a simulation of cataract surgery (ii) a simulation of laparoscopic hepatectomy (iii) a brain tumor surgery. Copyright © 2013 Elsevier B.V. All rights reserved.

The crack-contact and the free-end problem for a strip under residual stress

NASA Technical Reports Server (NTRS)

Bakioglu, M.; Erdogan, F.

1977-01-01

The plane problem for an infinite strip with two edge cracks under a given state of residual stress is considered. The residual stress is compressive near and at the surfaces and tensile in the interior of the strip. If the crack is deep enough to penetrate into the tensile zone, then the problem is one of crack-contact where the depth of the contact area is an unknown which depends on the crack depth and the residual stress profile. The problem has applications to the static fatigue of glass plates and is solved for three typical residual-stress profiles. In the limiting case of the crack's crossing the entire plate thickness, the problem becomes a stressfree end problem for a semiinfinite strip under a given residual-stress state away from the end. This is a typical stress diffusion problem in which decay behavior of the residual stress near and the nature of the normal displacement at the end of the semiinfinite strip are of special interest. For two typical residual-stress states the solution is obtained, and some numerical results are given.

Context and Opportunity: Multiple Perspectives on Parenting by Women With a Severe Mental Illness

PubMed Central

Barrow, Susan M.; Alexander, Mary Jane; McKinney, Jacki; Lawinski, Terese; Pratt, Christina

2014-01-01

Objective The capabilities framework and a community-based participatory research (CBPR) approach frame this study. We consider the real opportunities for parenting available for women with serious mental health diagnoses, despite complications posed by their own capacity, material constraints, social network disruptions, and, by law, custom and policy related to mental health conditions and child custody decisions. Method We convened focus groups with mothers currently living in shelters apart from their children, service providers in supported housing programs, grandmothers caring for children of mothers with mental health and substance use problems, and a policy discussion with mental health administrators. Qualitative analyses explored common and divergent perspectives on parenting experiences and aspirations of particularly marginalized mothers. Results Perspectives of mothers and other stakeholders converged in recognizing the parenting challenges facing mothers experiencing homelessness and mental health and substance use problems, but their views on the implications of this diverged sharply. Mothers’ current aspirations were limited by contextual obstacles to maintaining contact with children; other stakeholders saw contact as risky and reunification as improbable. All stakeholders described systemic barriers to supporting contact and ongoing mothering roles. Conclusions and Implications for Practice Evidence-based parenting interventions require facilitating policy contexts that do not foreclose parenting possibilities for mothers whose current challenges dictate modest immediate parenting goals. CBPR amplifies voices of lived experience to demonstrate what is possible over time for mothers with complex lives and histories. These become possibilities that a person can imagine for herself and are essential to inform the evidence base for practice and policy. PMID:24978622

Context and opportunity: multiple perspectives on parenting by women with a severe mental illness.

PubMed

Barrow, Susan M; Alexander, Mary Jane; McKinney, Jacki; Lawinski, Terese; Pratt, Christina

2014-09-01

The capabilities framework and a community-based participatory research (CBPR) approach frame this study. We consider the real opportunities for parenting available for women with serious mental health diagnoses, despite complications posed by their own capacity, material constraints, social network disruptions, and, by law, custom and policy related to mental health conditions and child custody decisions. We convened focus groups with mothers currently living in shelters apart from their children, service providers in supported housing programs, grandmothers caring for children of mothers with mental health and substance use problems, and a policy discussion with mental health administrators. Qualitative analyses explored common and divergent perspectives on parenting experiences and aspirations of particularly marginalized mothers. Perspectives of mothers and other stakeholders converged in recognizing the parenting challenges facing mothers experiencing homelessness and mental health and substance use problems, but their views on the implications of this diverged sharply. Mothers' current aspirations were limited by contextual obstacles to maintaining contact with children; other stakeholders saw contact as risky and reunification as improbable. All stakeholders described systemic barriers to supporting contact and ongoing mothering roles. Evidence-based parenting interventions require facilitating policy contexts that do not foreclose parenting possibilities for mothers whose current challenges dictate modest immediate parenting goals. CBPR amplifies voices of lived experience to demonstrate what is possible over time for mothers with complex lives and histories. These become possibilities that a person can imagine for herself and are essential to inform the evidence base for practice and policy. (PsycINFO Database Record (c) 2014 APA, all rights reserved).

History-Dependent Problems with Applications to Contact Models for Elastic Beams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartosz, Krzysztof; Kalita, Piotr; Migórski, Stanisław

We prove an existence and uniqueness result for a class of subdifferential inclusions which involve a history-dependent operator. Then we specialize this result in the study of a class of history-dependent hemivariational inequalities. Problems of such kind arise in a large number of mathematical models which describe quasistatic processes of contact. To provide an example we consider an elastic beam in contact with a reactive obstacle. The contact is modeled with a new and nonstandard condition which involves both the subdifferential of a nonconvex and nonsmooth function and a Volterra-type integral term. We derive a variational formulation of the problemmore » which is in the form of a history-dependent hemivariational inequality for the displacement field. Then, we use our abstract result to prove its unique weak solvability. Finally, we consider a numerical approximation of the model, solve effectively the approximate problems and provide numerical simulations.« less

Straightening of a wavy strip: An elastic-plastic contact problem including snap-through

NASA Technical Reports Server (NTRS)

Fischer, D. F.; Rammerstorfer, F. G.

1980-01-01

The nonlinear behavior of a wave like deformed metal strip during the levelling process were calculated. Elastic-plastic material behavior as well as nonlinearities due to large deformations were considered. The considered problem lead to a combined stability and contact problem. It is shown that, despite the initially concentrated loading, neglecting the change of loading conditions due to altered contact domains may lead to a significant error in the evaluation of the nonlinear behavior and particularly to an underestimation of the stability limit load. The stability was examined by considering the load deflection path and the behavior of a load-dependent current stiffness parameter in combination with the determinant of the current stiffness matrix.

Uzawa algorithm to solve elastic and elastic-plastic fretting wear problems within the bipotential framework

NASA Astrophysics Data System (ADS)

Ning, Po; Feng, Zhi-Qiang; Quintero, Juan Antonio Rojas; Zhou, Yang-Jing; Peng, Lei

2018-03-01

This paper deals with elastic and elastic-plastic fretting problems. The wear gap is taken into account along with the initial contact distance to obtain the Signorini conditions. Both the Signorini conditions and the Coulomb friction laws are written in a compact form. Within the bipotential framework, an augmented Lagrangian method is applied to calculate the contact forces. The Archard wear law is then used to calculate the wear gap at the contact surface. The local fretting problems are solved via the Uzawa algorithm. Numerical examples are performed to show the efficiency and accuracy of the proposed approach. The influence of plasticity has been discussed.

The mechanics of delamination in fiber-reinforced composite materials. Part 1: Stress singularities and solution structure

NASA Technical Reports Server (NTRS)

Wang, S. S.; Choi, I.

1983-01-01

The fundamental mechanics of delamination in fiber composite laminates is studied. Mathematical formulation of the problem is based on laminate anisotropic elasticity theory and interlaminar fracture mechanics concepts. Stress singularities and complete solution structures associated with general composite delaminations are determined. For a fully open delamination with traction-free surfaces, oscillatory stress singularities always appear, leading to physically inadmissible field solutions. A refined model is introduced by considering a partially closed delamination with crack surfaces in finite-length contact. Stress singularities associated with a partially closed delamination having frictional crack-surface contact are determined, and are found to be diferent from the inverse square-root one of the frictionless-contact case. In the case of a delamination with very small area of crack closure, a simplified model having a square-root stress singularity is employed by taking the limit of the partially closed delamination. The possible presence of logarithmic-type stress singularity is examined; no logarithmic singularity of any kind is found in the composite delamination problem. Numerical examples of dominant stress singularities are shown for delaminations having crack-tip closure with different frictional coefficients between general (1) and (2) graphite-epoxy composites.

A multi-institutional joint study of contact dermatitis related to hair colouring and perming agents in Japan.

PubMed

Ito, Akiko; Nishioka, Kazue; Kanto, Hiromi; Yagami, Akiko; Yamada, Shigeki; Sugiura, Mariko; Yasunaga, Chihiro; Yoshii, Keiko; Kobayashi, Hiromi; Adachi, Atsuko; Ikezawa, Yuko; Washizaki, Kumiko; Inui, Shigeki; Miyazawa, Hitoshi; Oiso, Naoki; Nakata, Tokio; Matsunaga, Kayoko

2017-07-01

In Japan, allergic contact dermatitis caused by hair colouring agents is a considerable problem for those occupationally exposed and also for consumers. Over the last 20 years, p-phenylenediamine (PPD) has been a common allergen, with ∼7% positive patch test reactions. To investigate which ingredients caused allergic contact dermatitis related to hair dye and perming solutions in Japan, to assess whether PPD is suitable for screening for hair dye allergy, and to propose allergens for a Japanese hairdresser series. We selected 19 hair cosmetic allergens, including PPD, Bandrowski's base, cysteamine HCl, and ammonium thioglycolate. Altogether 203 patients (26 males and 177 females) with suspected contact allergy to hair colouring or perming solutions at 14 hospitals in Japan were included. The highest prevalence of positive reactions (35.1%) was for PPD. p-Methylaminophenol and o-aminophenol were often positive, both in the PPD-positive and in the PPD-negative patients. Moreover, cysteamine HCl often yielded positive test reactions. PPD is insufficient to diagnose contact allergy caused by to hair dyes. We recommend 13 allergens to be included in a Japanese hairdresser series. © 2017 The Authors. Contact Dermatitis published by John Wiley & Sons Ltd.

Occupational allergic and irritant contact dermatitis in workers exposed to polyurethane foam.

PubMed

Kieć-Świerczyńska, Marta; Swierczyńska-Machura, Dominika; Chomiczewska-Skóra, Dorota; Nowakowska-Świrta, Ewa; Kręcisz, Beata

2014-04-01

To evaluate sensitization to chemicals present in work environment after an outbreak of contact dermatitis in workers of vehicle equipment factory, exposed to polyurethane foam, based on 4,4'-diphenylmethane diisocyanate (MDI). From among 300 employees, 21 individuals reporting work-related skin and/or respiratory tract symptoms underwent clinical examination, patch testing, skin prick tests, spirometry and MDI sIgE measurement in serum. Patch tests included isocyanates series, selected rubber additives, metals, fragrances, preservatives, and an antiadhesive agent. Clinical examination revealed current eczema in the area of hands and/or forearms in 10 workers. Positive patch test reactions were found in 10 individuals, the most frequent to diaminodiphenylmethane and 4-phenylenediamine (7 persons). Reactions to an antiadhesive agent were assessed as irritant (5 workers). Except for sensitization to common aeroallergens, no significant abnormalities were found in the remaining tests. Occupational allergic contact dermatitis was diagnosed in 7 workers, irritant contact dermatitis in 10 and coexisiting allergic and irritant contact dermatitis in 3 workers. In workers manufacturing products from polyurethane foam, attention should be paid to the risk of developing contact dermatitis. Skin problems in our study group were attributable probably to insufficient protection of the skin.

Wetting of flat gradient surfaces.

PubMed

Bormashenko, Edward

2018-04-01

Gradient, chemically modified, flat surfaces enable directed transport of droplets. Calculation of apparent contact angles inherent for gradient surfaces is challenging even for atomically flat ones. Wetting of gradient, flat solid surfaces is treated within the variational approach, under which the contact line is free to move along the substrate. Transversality conditions of the variational problem give rise to the generalized Young equation valid for gradient solid surfaces. The apparent (equilibrium) contact angle of a droplet, placed on a gradient surface depends on the radius of the contact line and the values of derivatives of interfacial tensions. The linear approximation of the problem is considered. It is demonstrated that the contact angle hysteresis is inevitable on gradient surfaces. Electrowetting of gradient surfaces is discussed. Copyright © 2018 Elsevier Inc. All rights reserved.

Ti-48Al-2Cr-2Nb Evaluated Under Fretting Conditions

NASA Technical Reports Server (NTRS)

Miyoshi, Kazuhisa; Lerch, Bradley A.; Draper, Susan L.; Raj, Sai V.

2002-01-01

Material parameters govern many of the design decisions in any engineering task. When two materials are in contact and microscopically small, relative motions (either vibratory or creeping) occur, and fretting fatigue can result. Fretting fatigue is a material response influenced by the materials in contact as well as by such variables as loading and vibratory conditions. Fretting produces fresh, clean interacting surfaces and induces adhesion, galling, and wear in the contact zone. Time, money, and materials are unnecessarily wasted when galling and wear result in excessive fretting fatigue that leads to poorly performing, unreliable mechanical systems. Fretting fatigue is a complex problem of significant interest to aircraft engine manufacturers. It can occur in a variety of engine components. Numerous approaches, depending on the component and the operating conditions, have been taken to address the fretting problems. The components of interest in this investigation were the low-pressure turbine blades and disks. The blades in this case were titanium aluminide, Ti-48Al-2Cr- 2Nb, and the disk was a nickel-base superalloy, Inconel 718 (IN 718). A concern for these airfoils is the fretting in fitted interfaces at the dovetail where the blade and disk are connected. Careful design can reduce fretting in most cases, but not completely eliminate it, because the airfoils frequently have a skewed (angled) blade-disk dovetail attachment, which leads to a complex stress state. Furthermore, the local stress state becomes more complex when the influence of the metal-metal contact and the edge of contact are considered.

Contact interaction of thin-walled elements with an elastic layer and an infinite circular cylinder under torsion

NASA Astrophysics Data System (ADS)

Kanetsyan, E. G.; Mkrtchyan, M. S.; Mkhitaryan, S. M.

2018-04-01

We consider a class of contact torsion problems on interaction of thin-walled elements shaped as an elastic thin washer – a flat circular plate of small height – with an elastic layer, in particular, with a half-space, and on interaction of thin cylindrical shells with a solid elastic cylinder, infinite in both directions. The governing equations of the physical models of elastic thin washers and thin circular cylindrical shells under torsion are derived from the exact equations of mathematical theory of elasticity using the Hankel and Fourier transforms. Within the framework of the accepted physical models, the solution of the contact problem between an elastic washer and an elastic layer is reduced to solving the Fredholm integral equation of the first kind with a kernel representable as a sum of the Weber–Sonin integral and some integral regular kernel, while solving the contact problem between a cylindrical shell and solid cylinder is reduced to a singular integral equation (SIE). An effective method for solving the governing integral equations of these problems are specified.

European Scientific Notes. Volume 38. Number 1.

DTIC Science & Technology

1984-01-01

posed a new set of ma; cause a simple pneumothorax, or may problems for developing countries. It result in arterial gas embolism with was felt that...basic knowledge-based mechan- ’ el Plan, ism to provide overall management of the fat -- rat execution of knowledge-based operations. 2. A parallel...from the liquid surface Fracture -toughness stress intensi- adjacent to the contact interface was ties derived for ZnS were shown to concluded to be

The Crack-contact and the Free End Problem for a Strip Under Residual Stress

NASA Technical Reports Server (NTRS)

Bakioglu, M.; Erdogan, F.

1976-01-01

The plane problem for an infinite strip with two edge cracks under a given state of residual stress is considered. The residual stress is compressive near and at the surfaces and tensile in the interior of the strip. If the crack is deep enough to penetrate into the tensile zone, then the problem is one of crack-contact problem in which the depth of the contact area is an unknown which depends on the crack depth and the residual stress profile. The problem has applications to the static fatigue of glass plates and is solved for three typical residual stress profiles. In the limiting case of the crack crossing the entire plate thickness, the problem becomes a stress-free end problem for a semi-infinite strip under a given residual stress state away from the end. This is a typical stress diffusion problem in which decay behavior of the residual stress near and the nature of the normal displacement at the end of the semi-infinite strip are of special interest. For two typical residual stress states the solution is obtained, and some numerical results are given.

Contact Disturbances, Self-Esteem and Life Satisfaction of University Students: A Structural Equation Modelling Study

ERIC Educational Resources Information Center

Tagay, Özlem

2015-01-01

Problem Statement: A literature analysis revealed that contact disturbances, self-esteem and life satisfaction have been examined in different studies separately. In particular, the researchers observed that the studies conducted on Gestalt contact disturbances are limited in number. In this study, the variables of contact disturbances,…

Contact Lens-related Complications: A Review

PubMed Central

Alipour, Fateme; Khaheshi, Saeed; Soleimanzadeh, Mahya; Heidarzadeh, Somayeh; Heydarzadeh, Sepideh

2017-01-01

Contact lens-related problems are common and can result in severe sight-threatening complications or contact lens drop out if not addressed properly. We systematically reviewed the most important and the most common contact lens-related complications and their diagnosis, epidemiology, and management according to the literature published in the last 20 years. PMID:28540012

The Cafeteria as Contact Zone: Developing a Multicultural Perspective through Multilingual and Multimodal Literacies

ERIC Educational Resources Information Center

Kelly, Courtney

2013-01-01

This article describes the inaugural year of a cross-cultural after-school program that used a problem-solving, project-based pedagogy to promote meaningful interactions between immigrant middle school students and their urban, low-income peers. The program relied on the students' local knowledge as they worked together to create social maps of…

77 FR 50541 - STP Nuclear Operating Company, South Texas Project, Units 1 and 2; Application for Amendment to...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-21

... any of the following methods: Federal Rulemaking Web Site: Go to http://www.regulations.gov and search.../reading-rm/adams.html . To begin the search, select ``ADAMS Public Documents'' and then select ``Begin Web- based ADAMS Search.'' For problems with ADAMS, please contact the NRC's Public Document Room (PDR...

77 FR 56238 - Wolf Creek Nuclear Operating Corporation, Wolf Creek Generating Station; Application for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-12

....regulations.gov and search for Docket ID NRC-2012-0212. Address questions about NRC dockets to Carol Gallagher....gov/reading-rm/adams.html . To begin the search, select ``ADAMS Public Documents'' and then select ``Begin Web- based ADAMS Search.'' For problems with ADAMS, please contact the NRC's Public Document Room...

78 FR 6142 - Vogtle Electric Generating Plant, Units 3 and 4; Application and Amendment to Combined Licenses...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-29

... NRC-2008- 0252. You may submit comments by any of the following methods: Federal Rulemaking Web site... publicly available, by any of the following methods: Federal Rulemaking Web site: Go to http://www... ``Begin Web- based ADAMS Search.'' For problems with ADAMS, please contact the NRC's Public Document Room...

Improved Turn-On and Operating Voltages in AlGaN-Based Deep-Ultraviolet Light-Emitting Diodes

NASA Astrophysics Data System (ADS)

Hao, Guo-Dong; Taniguchi, Manabu; Tamari, Naoki; Inoue, Shin-ichiro

2017-10-01

While good ohmic contact formation has been achieved on both p-GaN and n-AlGaN surfaces, the turn-on and operating voltages of AlGaN-based deep-ultraviolet light-emitting diodes (DUV-LEDs) remain very high. We find that this critical problem is mainly caused by the large difference between the annealing temperatures required for ohmic contact formation on the p-GaN and high Al-fraction n-AlGaN surfaces. We studied the effects of the high-temperature annealing treatments required for n-ohmic contact formation on the subsequent p-ohmic contact formation process in DUV-LEDs. The results show that post-annealing treatment at high temperature is necessary to form an ohmic contact on n-Al0.7Ga0.3N, but a treatment temperature of 900°C or more could cause severe degradation of the specific contact resistivity and the bulk resistivity of p-GaN. We conclude that 900°C is the optimum temperature to form an ohmic contact on n-Al0.7Ga0.3N in DUV-LEDs, where p-GaN and n-Al0.7Ga0.3N act as the p- and n-ohmic contact layers, respectively. We also found that the specific contact resistivity of p-GaN can be reduced by an additional low-temperature annealing treatment after the high-temperature annealing step; this effect can be attributed to the enhancement of the hole concentration in the p-GaN surface contact region. Finally, DUV-LEDs that emit at 280 nm were fabricated using four different annealing treatments during processing. A considerable reduction in the series resistance and thereby in the operating voltage was confirmed using the annealing process proposed above, consisting of a high-temperature anneal at 900°C followed by a low-temperature anneal at 500°C for 3 min.

Frictional Behavior of Micro/nanotextured Surfaces Investigated by Atomic Force Microscope: a Review

NASA Astrophysics Data System (ADS)

Zhang, Xiaoliang; Jia, Junhong

2015-08-01

Tribological issues between friction pair are fundamental problems for minimized devices because of their higher surface-to-volume ratio. Micro/nanotexturing is an effective technique to reduce actual contact area between contact pair at the nanoscale. Micro/nanotexture made a great impact on the frictional behavior of textured surfaces. This paper summarizes the recent advancements in the field of frictional behavior of micro/nanotextured surfaces, which are based on solid surface contact in atmosphere environment, especially focusing on the factors influencing the frictional behavior: Surface property, texturing density, texturing height, texturing structure and size of contact pair (atomic force microscope (AFM) tip) and texturing structures. Summarizing the effects of these factors on the frictional behavior is helpful for the understanding and designing of the surfaces in sliding micro/nanoelectromechanical systems (MEMS/NEMS). Controlling and reducing the friction force in moving mechanical systems is very important for the performance and reliability of nanosystems, which contribute to a sustainable future.

Metrology for the manufacturing of freeform optics

NASA Astrophysics Data System (ADS)

Blalock, Todd; Myer, Brian; Ferralli, Ian; Brunelle, Matt; Lynch, Tim

2017-10-01

Recently the use of freeform surfaces have become a realization for optical designers. These non-symmetrical optical surfaces have allowed unique solutions to optical design problems. The implementation of freeform optical surfaces has been limited by manufacturing capabilities and quality. However over the past several years freeform fabrication processes have improved in capability and precision. But as with any manufacturing, proper metrology is required to monitor and verify the process. Typical optics metrology such as interferometry has its challenges and limitations with the unique shapes of freeform optics. Two contact metrology methods for freeform metrology are presented; a Leitz coordinate measurement machine (CMM) with an uncertainty of +/- 0.5 μm and a high resolution profilometer (Panasonic UA3P) with a measurement uncertainty of +/- 0.05 μm. We are also developing a non-contact high resolution technique based on the fringe reflection technique known as deflectometry. This fast non-contact metrology has the potential to compete with accuracies of the contact methods but also can acquire data in seconds rather than minutes or hours.

Acoustic emission evolution during sliding friction of Hadfield steel single crystal

NASA Astrophysics Data System (ADS)

Lychagin, D. V.; Novitskaya, O. S.; Kolubaev, A. V.; Sizova, O. V.

2017-12-01

Friction is a complex dynamic process. Direct observation of processes occurring in the friction zone is impossible due to a small size of a real contact area and, as a consequence, requires various additional methods applicable to monitor a tribological contact state. One of such methods consists in the analysis of acoustic emission data of a tribological contact. The use of acoustic emission entails the problem of interpreting physical sources of signals. In this paper, we analyze the evolution of acoustic emission signal frames in friction of Hadfield steel single crystals. The chosen crystallographic orientation of single crystals enables to identify four stages related to friction development as well as acoustic emission signals inherent in these stages. Acoustic emission signal parameters are studied in more detail by the short-time Fourier transform used to determine the time variation of the median frequency and its power spectrum. The results obtained will facilitate the development of a more precise method to monitor the tribological contact based on the acoustic emission method.

Non-contact radio frequency shielding and wave guiding by multi-folded transformation optics method

PubMed Central

Madni, Hamza Ahmad; Zheng, Bin; Yang, Yihao; Wang, Huaping; Zhang, Xianmin; Yin, Wenyan; Li, Erping; Chen, Hongsheng

2016-01-01

Compared with conventional radio frequency (RF) shielding methods in which the conductive coating material encloses the circuits design and the leakage problem occurs due to the gap in such conductive material, non-contact RF shielding at a distance is very promising but still impossible to achieve so far. In this paper, a multi-folded transformation optics method is proposed to design a non-contact device for RF shielding. This “open-shielded” device can shield any object at a distance from the electromagnetic waves at the operating frequency, while the object is still physically open to the outer space. Based on this, an open-carpet cloak is proposed and the functionality of the open-carpet cloak is demonstrated. Furthermore, we investigate a scheme of non-contact wave guiding to remotely control the propagation of surface waves over any obstacles. The flexibilities of such multi-folded transformation optics method demonstrate the powerfulness of the method in the design of novel remote devices with impressive new functionalities. PMID:27841358

Elastic model of the traction behavior of two traction lubricants

NASA Technical Reports Server (NTRS)

Loewenthal, S. H.; Rohn, D. A.

1984-01-01

In the analysis of rolling-sliding concentrated contacts, such as gears, bearings and traction drives, the traction characteristics of the lubricant are of prime importance. The elastic shear modulus and limiting shear stress properties of the lubricant dictate the traction/slip characteristics and power loss associated with an EHD contact undergoing slip and/or spin. These properties can be deducted directly from the initial slope m and maximum traction coefficient micron of an experimental traction curve. In this investigation, correlation equations are presented to predict m and micron for two modern traction fluids based on the regression analysis of 334 separate traction disk machine experiments. The effects of contact pressure, temperature, surface velocity, ellipticity ratio are examined. Problems in deducing lubricant shear moduli from disk machine tests are discussed. Previously announced in STAR as N83-20116

Contact problem for a solid indenter and a viscoelastic half-space described by the spectrum of relaxation and retardation times

NASA Astrophysics Data System (ADS)

Stepanov, F. I.

2018-04-01

The mechanical properties of a material which is modeled by an exponential creep kernel characterized by a spectrum of relaxation and retardation times are studied. The research is carried out considering a contact problem for a solid indenter sliding over a viscoelastic half-space. The contact pressure, indentation depth of the indenter, and the deformation component of the friction coefficient are analyzed with respect to the case of half-space material modeled by single relaxation and retardation times.

Parallel Simulation of Three-Dimensional Free-Surface Fluid Flow Problems

DOE Office of Scientific and Technical Information (OSTI.GOV)

BAER,THOMAS A.; SUBIA,SAMUEL R.; SACKINGER,PHILIP A.

2000-01-18

We describe parallel simulations of viscous, incompressible, free surface, Newtonian fluid flow problems that include dynamic contact lines. The Galerlin finite element method was used to discretize the fully-coupled governing conservation equations and a ''pseudo-solid'' mesh mapping approach was used to determine the shape of the free surface. In this approach, the finite element mesh is allowed to deform to satisfy quasi-static solid mechanics equations subject to geometric or kinematic constraints on the boundaries. As a result, nodal displacements must be included in the set of problem unknowns. Issues concerning the proper constraints along the solid-fluid dynamic contact line inmore » three dimensions are discussed. Parallel computations are carried out for an example taken from the coating flow industry, flow in the vicinity of a slot coater edge. This is a three-dimensional free-surface problem possessing a contact line that advances at the web speed in one region but transitions to static behavior in another part of the flow domain. Discussion focuses on parallel speedups for fixed problem size, a class of problems of immediate practical importance.« less

School-based Screening to Identify Children At Risk for Attention-Deficit/Hyperactivity Disorder: Barriers and Implications

PubMed Central

Barry, Tammy D.; Sturner, Raymond A.; Seymour, Karen; Howard, Barbara H.; McGoron, Lucy; Bergmann, Paul; Kent, Ronald; Sullivan, Casey; Tomeny, Theodore S.; Pierce, Jessica S.; Coin, Kristen L.; Goodlad, James K.; Werle, Nichole

2014-01-01

This report describes a school-based screening project to improve early identification of children at risk for attention-deficit/hyperactivity disorder (ADHD) and communicate these concerns to parents, recommending that they contact their child’s primary care provider (PCP). Of 17,440 eligible children in first through fifth grades in five school districts, 47.0% of parents provided required written consent, and teachers completed 70.4% of the online screeners (using the Vanderbilt AD/HD Diagnostic Teacher Rating Scale). Of 5,772 screeners completed, 18.1% of children (n = 1,044) were identified as at risk. Parents of at-risk children were contacted to explain risk status and recommended to visit their child’s PCP for further evaluation. It was not possible to contact 39.1% of parents of at-risk children. Of the 636 parents of at-risk children who could be contacted, 53.1% (n = 338) verbally accepted the recommendation to follow-up with their PCP, which was not related to ADHD symptom severity. Parents of children with IEPs or related services were more likely to accept the recommendation to visit the PCP. Our exploration of the potential for school-based screening for ADHD identified a number of barriers to successful execution, but the data also indicated that this is an important problem to address. PMID:27642209

A constitutive law for finite element contact problems with unclassical friction

NASA Technical Reports Server (NTRS)

Plesha, M. E.; Steinetz, B. M.

1986-01-01

Techniques for modeling complex, unclassical contact-friction problems arising in solid and structural mechanics are discussed. A constitutive modeling concept is employed whereby analytic relations between increments of contact surface stress (i.e., traction) and contact surface deformation (i.e., relative displacement) are developed. Because of the incremental form of these relations, they are valid for arbitrary load-deformation histories. The motivation for the development of such a constitutive law is that more realistic friction idealizations can be implemented in finite element analysis software in a consistent, straightforward manner. Of particular interest is modeling of two-body (i.e., unlubricated) metal-metal, ceramic-ceramic, and metal-ceramic contact. Interfaces involving ceramics are of engineering importance and are being considered for advanced turbine engines in which higher temperature materials offer potential for higher engine fuel efficiency.

An algorithm for variational data assimilation of contact concentration measurements for atmospheric chemistry models

NASA Astrophysics Data System (ADS)

Penenko, Alexey; Penenko, Vladimir

2014-05-01

Contact concentration measurement data assimilation problem is considered for convection-diffusion-reaction models originating from the atmospheric chemistry study. High dimensionality of models imposes strict requirements on the computational efficiency of the algorithms. Data assimilation is carried out within the variation approach on a single time step of the approximated model. A control function is introduced into the source term of the model to provide flexibility for data assimilation. This function is evaluated as the minimum of the target functional that connects its norm to a misfit between measured and model-simulated data. In the case mathematical model acts as a natural Tikhonov regularizer for the ill-posed measurement data inversion problem. This provides flow-dependent and physically-plausible structure of the resulting analysis and reduces a need to calculate model error covariance matrices that are sought within conventional approach to data assimilation. The advantage comes at the cost of the adjoint problem solution. This issue is solved within the frameworks of splitting-based realization of the basic convection-diffusion-reaction model. The model is split with respect to physical processes and spatial variables. A contact measurement data is assimilated on each one-dimensional convection-diffusion splitting stage. In this case a computationally-efficient direct scheme for both direct and adjoint problem solution can be constructed based on the matrix sweep method. Data assimilation (or regularization) parameter that regulates ratio between model and data in the resulting analysis is obtained with Morozov discrepancy principle. For the proper performance the algorithm takes measurement noise estimation. In the case of Gaussian errors the probability that the used Chi-squared-based estimate is the upper one acts as the assimilation parameter. A solution obtained can be used as the initial guess for data assimilation algorithms that assimilate outside the splitting stages and involve iterations. Splitting method stage that is responsible for chemical transformation processes is realized with the explicit discrete-analytical scheme with respect to time. The scheme is based on analytical extraction of the exponential terms from the solution. This provides unconditional positive sign for the evaluated concentrations. Splitting-based structure of the algorithm provides means for efficient parallel realization. The work is partially supported by the Programs No 4 of Presidium RAS and No 3 of Mathematical Department of RAS, by RFBR project 11-01-00187 and Integrating projects of SD RAS No 8 and 35. Our studies are in the line with the goals of COST Action ES1004.

Improved protein model quality assessments by changing the target function.

PubMed

Uziela, Karolis; Menéndez Hurtado, David; Shu, Nanjiang; Wallner, Björn; Elofsson, Arne

2018-06-01

Protein modeling quality is an important part of protein structure prediction. We have for more than a decade developed a set of methods for this problem. We have used various types of description of the protein and different machine learning methodologies. However, common to all these methods has been the target function used for training. The target function in ProQ describes the local quality of a residue in a protein model. In all versions of ProQ the target function has been the S-score. However, other quality estimation functions also exist, which can be divided into superposition- and contact-based methods. The superposition-based methods, such as S-score, are based on a rigid body superposition of a protein model and the native structure, while the contact-based methods compare the local environment of each residue. Here, we examine the effects of retraining our latest predictor, ProQ3D, using identical inputs but different target functions. We find that the contact-based methods are easier to predict and that predictors trained on these measures provide some advantages when it comes to identifying the best model. One possible reason for this is that contact based methods are better at estimating the quality of multi-domain targets. However, training on the S-score gives the best correlation with the GDT_TS score, which is commonly used in CASP to score the global model quality. To take the advantage of both of these features we provide an updated version of ProQ3D that predicts local and global model quality estimates based on different quality estimates. © 2018 Wiley Periodicals, Inc.

Western herbal medicine consultations for common menstrual problems; practitioner experiences and perceptions of treatment.

PubMed

Fisher, Carole; Adams, Jon; Frawley, Jane; Hickman, Louise; Sibbritt, David

2018-03-01

To explore the prevalence with which Australian Western herbalists treat menstrual problems and their related treatment, experiences, perceptions, and interreferral practices with other health practitioners. Members of the Practitioner Research and Collaboration Initiative practice-based research network identifying as Western Herbalists (WHs) completed a specifically developed, online questionnaire. Western Herbalists regularly treat menstrual problems, perceiving high, though differential, levels of effectiveness. For menstrual problems, WHs predominantly prescribe individualised formulas including core herbs, such as Vitex agnus-castus, and problem-specific herbs. Estimated clients' weekly cost (median = $25.00) and treatment duration (median = 4-6 months) covering this Western herbal medicine treatment appears relatively low. Urban-based women are more likely than those rurally based to have used conventional treatment for their menstrual problems before consulting WHs (p = .001). Only 19% of WHs indicated direct contact by conventional medical practitioners regarding treatment of clients' menstrual problems despite 42% indicating clients' conventional practitioners recommended consultation with WH. Western herbal medicine may be a substantially prevalent, cost-effective treatment option amongst women with menstrual problems. A detailed examination of the behaviour of women with menstrual problems who seek and use Western herbal medicine warrants attention to ensure this healthcare option is safe, effective, and appropriately co-ordinated within women's wider healthcare use. Copyright © 2017 John Wiley & Sons, Ltd.

On the contact interaction of two identical stringers with an elastic semi-infinite continuous or vertically cracked plate

NASA Astrophysics Data System (ADS)

Grigoryan, M. S.

2018-04-01

This paper considers two connected contact problems on the interaction of stringers with an elastic semi-infinite plate. In the first problem, an elastic half-infinite continuous plate is reinforced on its boundary by two identical stringers exposed to a tensile external force. In the second problem, in the presence of the same stringers, the plate contains a collinear system of cracks on its vertical axis. The solution of both problems is reduced to the solution of singular integral equations (SIE) that are solved by a known numerical-analytical method.

Healthcare utilization in general practice before and after psychological treatment: a follow-up data linkage study in primary care.

PubMed

Prins, Marijn A; Verhaak, Peter F M; Smit, Dineke; Verheij, Robert A

2014-09-01

Literature suggests that serious mental health problems increase the use of health services and psychological interventions can reduce this effect. This study investigates whether this effect is also found in primary care patients with less serious mental health problems. Routine electronic health records (EHR) from a representative sample of 128 general practices were linked to patient files from 150 primary care psychologists participating in the NIVEL Primary Care Database, using a trusted third party. Data were linked using the date of birth, gender, and postcode. This yielded 503 unique data pairs that were listed in one of the participating GP practices in 2008-2010, for people who had psychological treatment from a psychologist that ended in 2009. The number of contacts, health problems presented, and prescribed medication in general practice were analysed before and after the psychological treatment. Nearly all 503 patients consulted their GP during the six months preceding the psychological treatment (90.9%) and also in the six months after this treatment had ended (83.7%). The frequency of contacts was significantly higher before than after the psychological treatment (6.1 vs. 4.8). Fewer patients contacted their GPs specifically for psychological or social problems (46.3% vs. 38.8%) and fewer patients had anxiolytic drug prescriptions (15.5% vs. 7.6%) after psychological treatment. After psychological treatment, patients contact their GPs less often and present fewer psychological or social problems. Although contact rates seem to decrease, clients of psychologists are still frequent GP attenders.

Accurate Prediction of Protein Contact Maps by Coupling Residual Two-Dimensional Bidirectional Long Short-Term Memory with Convolutional Neural Networks.

PubMed

Hanson, Jack; Paliwal, Kuldip; Litfin, Thomas; Yang, Yuedong; Zhou, Yaoqi

2018-06-19

Accurate prediction of a protein contact map depends greatly on capturing as much contextual information as possible from surrounding residues for a target residue pair. Recently, ultra-deep residual convolutional networks were found to be state-of-the-art in the latest Critical Assessment of Structure Prediction techniques (CASP12, (Schaarschmidt et al., 2018)) for protein contact map prediction by attempting to provide a protein-wide context at each residue pair. Recurrent neural networks have seen great success in recent protein residue classification problems due to their ability to propagate information through long protein sequences, especially Long Short-Term Memory (LSTM) cells. Here we propose a novel protein contact map prediction method by stacking residual convolutional networks with two-dimensional residual bidirectional recurrent LSTM networks, and using both one-dimensional sequence-based and two-dimensional evolutionary coupling-based information. We show that the proposed method achieves a robust performance over validation and independent test sets with the Area Under the receiver operating characteristic Curve (AUC)>0.95 in all tests. When compared to several state-of-the-art methods for independent testing of 228 proteins, the method yields an AUC value of 0.958, whereas the next-best method obtains an AUC of 0.909. More importantly, the improvement is over contacts at all sequence-position separations. Specifically, a 8.95%, 5.65% and 2.84% increase in precision were observed for the top L∕10 predictions over the next best for short, medium and long-range contacts, respectively. This confirms the usefulness of ResNets to congregate the short-range relations and 2D-BRLSTM to propagate the long-range dependencies throughout the entire protein contact map 'image'. SPOT-Contact server url: http://sparks-lab.org/jack/server/SPOT-Contact/. Supplementary data is available at Bioinformatics online.

A social activity and physical contact-based routing algorithm in mobile opportunistic networks for emergency response to sudden disasters

NASA Astrophysics Data System (ADS)

Wang, Xiaoming; Lin, Yaguang; Zhang, Shanshan; Cai, Zhipeng

2017-05-01

Sudden disasters such as earthquake, flood and hurricane necessitate the employment of communication networks to carry out emergency response activities. Routing has a significant impact on the functionality, performance and flexibility of communication networks. In this article, the routing problem is studied considering the delivery ratio of messages, the overhead ratio of messages and the average delay of messages in mobile opportunistic networks (MONs) for enterprise-level emergency response communications in sudden disaster scenarios. Unlike the traditional routing methods for MONS, this article presents a new two-stage spreading and forwarding dynamic routing algorithm based on the proposed social activity degree and physical contact factor for mobile customers. A new modelling method for describing a dynamic evolving process of the topology structure of a MON is first proposed. Then a multi-copy spreading strategy based on the social activity degree of nodes and a single-copy forwarding strategy based on the physical contact factor between nodes are designed. Compared with the most relevant routing algorithms such as Epidemic, Prophet, Labelled-sim, Dlife-comm and Distribute-sim, the proposed routing algorithm can significantly increase the delivery ratio of messages, and decrease the overhead ratio and average delay of messages.

78 FR 49305 - Luminant Generation Company LLC, Comanche Peak Nuclear Power Plant, Unit Nos. 1 and 2...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-13

... http://www.regulations.gov and search for Docket ID NRC-2013-0182. Address questions about NRC dockets... NRC Library at http://www.nrc.gov/reading-rm/adams.html . To begin the search, select ``ADAMS Public Documents'' and then select ``Begin Web- based ADAMS Search.'' For problems with ADAMS, please contact the...

To See Anew: New Technologies Are Moving Rapidly Toward Restoring or Enabling Vision in the Blind.

PubMed

Grifantini, Kristina

2017-01-01

Humans have been using technology to improve their vision for many decades. Eyeglasses, contact lenses, and, more recently, laser-based surgeries are commonly employed to remedy vision problems, both minor and major. But options are far fewer for those who have not seen since birth or who have reached stages of blindness in later life.

Information processing in an urban fire department communication system.

PubMed

Siegel, J; Weitzman, D O

1975-09-01

One of the most important functions of any fire department is to provide selective contact with fire fighting units and to dispatch these units based on information gathered from street alarm boxes and telephones. This paper is concerned with the problem of dispatching tactical response information to remote fire fighting units and with the effect of workload on the dispatch function.

Self Assembly and Pyroelectric Poling for Organics

DTIC Science & Technology

2015-07-06

ozone or nitrogen oxides) and energetic species from corona discharge . These problems can strongly inhibit the efficient poling and large-scale...poling techniques. Although contact and corona poling protocols are quite well established for decades, there do exist some challenging problems. In...contact poling, severe charge injection from metal electrodes often results in large current that causes dielectric breakdown of films. Corona poling

Challenges and Gaps in Understanding Substance Use Problems in Transitional Age Youth.

PubMed

Bukstein, Oscar G

2017-04-01

Transitional age youth (TAY), developing from adolescence to adulthood, exhibit the highest level of alcohol and other drug use of any other age group. Risk factors mirror those for the development of problems and disorders in adolescents. Early screening of both college students and noncollege high-risk TAY in the community is critical to early and effective intervention. Brief interventions using motivational techniques are effective for many TAY, particularly for those in early stages of problem use on college campuses. Professionals in contact with TAY should be aware of evidence-based interventions and providers for substance use disorders in the community. Copyright © 2016 Elsevier Inc. All rights reserved.

European Surveillance System on Contact Allergies (ESSCA): results with the European baseline series, 2013/14.

PubMed

Uter, W; Amario-Hita, J C; Balato, A; Ballmer-Weber, B; Bauer, A; Belloni Fortina, A; Bircher, A; Chowdhury, M M U; Cooper, S M; Czarnecka-Operacz, M; Dugonik, A; Gallo, R; Giménez-Arnau, A; Johansen, J D; John, S M; Kieć-Świerczyńska, M; Kmecl, T; Kręcisz, B; Larese Filon, F; Mahler, V; Pesonen, M; Rustemeyer, T; Sadowska-Przytocka, A; Sánchez-Pérez, J; Schliemann, S; Schuttelaar, M L; Simon, D; Spiewak, R; Valiukevičienė, S; Weisshaar, E; White, I R; Wilkinson, S M

2017-09-01

Contact allergy is a common condition and can severely interfere with daily life or professional activities. Due to changes in exposures, such as introduction of new substances, new products or formulations and regulatory intervention, the spectrum of contact sensitization changes. To evaluate the current spectrum of contact allergy to allergens present in the European baseline series (EBS) across Europe. Retrospective analysis of data collected by the European Surveillance System on Contact Allergies (ESSCA, www.essca-dc.org) in consecutively patch-tested patients, 2013/14, in 46 departments in 12 European countries. Altogether, 31 689 patients were included in the analysis. Compared to a similar analysis in 2004, the prevalence of contact allergy to methylisothiazolinone went up to around 20% in several departments. In comparison, contact allergy to the metals nickel, cobalt and chromium remained largely stable, at 18.1%, 5.9% and 3.2%, respectively, similar to mostly unchanged prevalence with fragrance mix I, II and Myroxylon pereirae (balsam of Peru) at 7.3%, 3.8% and 5.3%, respectively. In the subgroup of departments diagnosing (mainly) patients with occupational contact dermatitis, the prevalence of work-related contact allergies such as epoxy resin or rubber additives was found to be increased, compared to general dermatology departments. Continuous surveillance of contact allergy based on network data offers the identification of time trends or persisting problems, and thus enables focussing in-depth research (subgroup analyses, exposure analysis) on areas where it is needed. © 2017 European Academy of Dermatology and Venereology.

Palmprint Recognition Across Different Devices.

PubMed

Jia, Wei; Hu, Rong-Xiang; Gui, Jie; Zhao, Yang; Ren, Xiao-Ming

2012-01-01

In this paper, the problem of Palmprint Recognition Across Different Devices (PRADD) is investigated, which has not been well studied so far. Since there is no publicly available PRADD image database, we created a non-contact PRADD image database containing 12,000 grayscale captured from 100 subjects using three devices, i.e., one digital camera and two smart-phones. Due to the non-contact image acquisition used, rotation and scale changes between different images captured from a same palm are inevitable. We propose a robust method to calculate the palm width, which can be effectively used for scale normalization of palmprints. On this PRADD image database, we evaluate the recognition performance of three different methods, i.e., subspace learning method, correlation method, and orientation coding based method, respectively. Experiments results show that orientation coding based methods achieved promising recognition performance for PRADD.

Palmprint Recognition across Different Devices

PubMed Central

Jia, Wei; Hu, Rong-Xiang; Gui, Jie; Zhao, Yang; Ren, Xiao-Ming

2012-01-01

In this paper, the problem of Palmprint Recognition Across Different Devices (PRADD) is investigated, which has not been well studied so far. Since there is no publicly available PRADD image database, we created a non-contact PRADD image database containing 12,000 grayscale captured from 100 subjects using three devices, i.e., one digital camera and two smart-phones. Due to the non-contact image acquisition used, rotation and scale changes between different images captured from a same palm are inevitable. We propose a robust method to calculate the palm width, which can be effectively used for scale normalization of palmprints. On this PRADD image database, we evaluate the recognition performance of three different methods, i.e., subspace learning method, correlation method, and orientation coding based method, respectively. Experiments results show that orientation coding based methods achieved promising recognition performance for PRADD. PMID:22969380

Longer eye contact improves ADHD children's compliance with parents' commands.

PubMed

Kapalka, G M

2004-08-01

This study evaluated the effectiveness of eye contact in reducing ADHD children's problems with compliance. Seventy-six parents of ADHD boys between ages 5 and 10 were randomized into two treatment groups and a control group. Repeated-measures ANOVA revealed that, as hypothesized, eye contact was effective in reducing ADHD children's problems with non-compliance to their parents' commands. In addition, those parents who subsequently used a stare technique for 20 to 30 seconds following the command reported even greater reduction in problems with compliance. It is possible that the additional time following the command allows the child to process the situation and decide whether compliance or non-compliance is the better option. It is a parent that parent - training programs should consider the inclusion of this technique in their treatment paradigms.

Stability of Contact Lines in Fluids: 2D Stokes Flow

NASA Astrophysics Data System (ADS)

Guo, Yan; Tice, Ian

2018-02-01

In an effort to study the stability of contact lines in fluids, we consider the dynamics of an incompressible viscous Stokes fluid evolving in a two-dimensional open-top vessel under the influence of gravity. This is a free boundary problem: the interface between the fluid in the vessel and the air above (modeled by a trivial fluid) is free to move and experiences capillary forces. The three-phase interface where the fluid, air, and solid vessel wall meet is known as a contact point, and the angle formed between the free interface and the vessel is called the contact angle. We consider a model of this problem that allows for fully dynamic contact points and angles. We develop a scheme of a priori estimates for the model, which then allow us to show that for initial data sufficiently close to equilibrium, the model admits global solutions that decay to equilibrium exponentially quickly.

Feasibility study of a take-home array-based functional electrical stimulation system with automated setup for current functional electrical stimulation users with foot-drop.

PubMed

Prenton, Sarah; Kenney, Laurence P; Stapleton, Claire; Cooper, Glen; Reeves, Mark L; Heller, Ben W; Sobuh, Mohammad; Barker, Anthony T; Healey, Jamie; Good, Timothy R; Thies, Sibylle B; Howard, David; Williamson, Tracey

2014-10-01

To investigate the feasibility of unsupervised community use of an array-based automated setup functional electrical stimulator for current foot-drop functional electrical stimulation (FES) users. Feasibility study. Gait laboratory and community use. Participants (N=7) with diagnosis of unilateral foot-drop of central neurologic origin (>6mo) who were regular users of a foot-drop FES system (>3mo). Array-based automated setup FES system for foot-drop (ShefStim). Logged usage, logged automated setup times for the array-based automated setup FES system and diary recording of problems experienced, all collected in the community environment. Walking speed, ankle angles at initial contact, foot clearance during swing, and the Quebec User Evaluation of Satisfaction with Assistive Technology version 2.0 (QUEST version 2.0) questionnaire, all collected in the gait laboratory. All participants were able to use the array-based automated setup FES system. Total setup time took longer than participants' own FES systems, and automated setup time was longer than in a previous study of a similar system. Some problems were experienced, but overall, participants were as satisfied with this system as their own FES system. The increase in walking speed (N=7) relative to no stimulation was comparable between both systems, and appropriate ankle angles at initial contact (N=7) and foot clearance during swing (n=5) were greater with the array-based automated setup FES system. This study demonstrates that an array-based automated setup FES system for foot-drop can be successfully used unsupervised. Despite setup's taking longer and some problems, users are satisfied with the system and it would appear as effective, if not better, at addressing the foot-drop impairment. Further product development of this unique system, followed by a larger-scale and longer-term study, is required before firm conclusions about its efficacy can be reached. Copyright © 2014 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Accurate Prediction of Contact Numbers for Multi-Spanning Helical Membrane Proteins

PubMed Central

Li, Bian; Mendenhall, Jeffrey; Nguyen, Elizabeth Dong; Weiner, Brian E.; Fischer, Axel W.; Meiler, Jens

2017-01-01

Prediction of the three-dimensional (3D) structures of proteins by computational methods is acknowledged as an unsolved problem. Accurate prediction of important structural characteristics such as contact number is expected to accelerate the otherwise slow progress being made in the prediction of 3D structure of proteins. Here, we present a dropout neural network-based method, TMH-Expo, for predicting the contact number of transmembrane helix (TMH) residues from sequence. Neuronal dropout is a strategy where certain neurons of the network are excluded from back-propagation to prevent co-adaptation of hidden-layer neurons. By using neuronal dropout, overfitting was significantly reduced and performance was noticeably improved. For multi-spanning helical membrane proteins, TMH-Expo achieved a remarkable Pearson correlation coefficient of 0.69 between predicted and experimental values and a mean absolute error of only 1.68. In addition, among those membrane protein–membrane protein interface residues, 76.8% were correctly predicted. Mapping of predicted contact numbers onto structures indicates that contact numbers predicted by TMH-Expo reflect the exposure patterns of TMHs and reveal membrane protein–membrane protein interfaces, reinforcing the potential of predicted contact numbers to be used as restraints for 3D structure prediction and protein–protein docking. TMH-Expo can be accessed via a Web server at www.meilerlab.org. PMID:26804342

Contact problem on indentation of an elastic half-plane with an inhomogeneous coating by a flat punch in the presence of tangential stresses on a surface

NASA Astrophysics Data System (ADS)

Volkov, Sergei S.; Vasiliev, Andrey S.; Aizikovich, Sergei M.; Sadyrin, Evgeniy V.

2018-05-01

Indentation of an elastic half-space with functionally graded coating by a rigid flat punch is studied. The half-plane is additionally subjected to distributed tangential stresses. Tangential stresses are represented in a form of Fourier series. The problem is reduced to the solution of two dual integral equations over even and odd functions describing distribution of unknown normal contact stresses. The solutions of these dual integral equations are constructed by the bilateral asymptotic method. Approximated analytical expressions for contact normal stresses are provided.

Teaching contact metamorphism, isograds, and mixed-volatile reactions: A suite-based approach

NASA Astrophysics Data System (ADS)

Peck, W. H.

2003-12-01

An important goal of teaching Introductory Petrology is to demonstrate how different kinds of approaches are integrated in studying petrologic problems. Depending on the goals of the study data used can be from the field, hand-sample, microscope, electron beam instrument, or mass spectrometer. A suite of samples with a known geographical and geological context can help students in drawing connections between different petrologic approaches, as the `geologic story' of the samples becomes a unifying theme. For teaching a unit on calc-silicates I use a suite of siliceous dolomite samples collected from the Ubehebe contact aureole (Death Valley, NV) as well as published data (Roselle et al., 1997; 1999) in a linked series of laboratory exercises and problem sets. The geology of the contact aureole is introduced in a three-hour laboratory exercise, where students identify the appearance of tremolite, forsterite, and periclase/brucite and the disappearance of quartz as the intrusion is approached. A concurrent problem set uses simplified mineral assemblage maps from the aureole. In the problem set students delineate isograds and determine the balanced metamorphic reactions by which the metamorphic minerals formed. Lecture material during this unit focuses on the physical properties of fluids in the crust and the mineralogical evidence for fluid-flow (with an emphasis on mixed-volatile reactions and T-XCO2 diagrams). A concrete field example helps focus student attention on the interrelation of disparate approaches by which petrologic problems addressed. The Ubehebe suite then becomes a unifying theme throughout the course: the specimens or regional geology are used in subsequent laboratories and lectures when introducing concepts such as grain nucleation and growth, reaction overstepping, and replacement textures. A virtual field trip of the Alta aureole, UT (using field photographs, maps, and photomicrographs) concludes the unit. The geology of the Alta aureole is similar to that of Ubehebe, and the virtual field trip acts as a review that emphases the general usefulness of the approaches discussed.

Integrated dynamic modeling of rail vehicles and infrastructure : modeling switch geometry.

DOT National Transportation Integrated Search

2015-08-27

Many procedures have been proposed to solve the wheel/rail contact problem, most of which belong to one of two categories: off-line and on-line contact search methods. This investigation is focused on the development of a contact surface model for th...

Implicit Geometry Meshing for the simulation of Rotary Friction Welding

NASA Astrophysics Data System (ADS)

Schmicker, D.; Persson, P.-O.; Strackeljan, J.

2014-08-01

The simulation of Rotary Friction Welding (RFW) is a challenging task, since it states a coupled problem of phenomena like large plastic deformations, heat flux, contact and friction. In particular the mesh generation and its restoration when using a Lagrangian description of motion is of significant severity. In this regard Implicit Geometry Meshing (IGM) algorithms are promising alternatives to the more conventional explicit methods. Because of the implicit description of the geometry during remeshing, the IGM procedure turns out to be highly robust and generates spatial discretizations of high quality regardless of the complexity of the flash shape and its inclusions. A model for efficient RFW simulation is presented, which is based on a Carreau fluid law, an Augmented Lagrange approach in mapping the incompressible deformations, a penalty contact approach, a fully regularized Coulomb-/fluid friction law and a hybrid time integration strategy. The implementation of the IGM algorithm using 6-node triangular finite elements is described in detail. The techniques are demonstrated on a fairly complex friction welding problem, demonstrating the performance and the potentials of the proposed method. The techniques are general and straight-forward to implement, and offer the potential of successful adoption to a wide range of other engineering problems.

First contact diagnosis and management of contact lens-related complications.

PubMed

Fagan, Xavier J; Jhanji, Vishal; Constantinou, Marios; Amirul Islam, F M; Taylor, Hugh R; Vajpayee, Rasik B

2012-08-01

To describe the spectrum of contact lens-related problems in cases presenting to a tertiary referral eye hospital. A retrospective case record analysis of 111 eyes of 97 consecutive patients was undertaken over a period of five months at the Royal Victorian Eye and Ear Hospital, Melbourne, Australia. Contact lens-related complications (CLRC) were classified into microbial keratitis, sterile corneal infiltrates, corneal epitheliopathy and contact lens-related red eye (CLARE). Main parameters examined were nature of the first contact, clinical diagnosis, and management pattern. Forty-two percent of the initial presentations were to health care practitioners (HCPs) other than ophthalmologists. Mean duration from the onset of symptoms to presentation was 6.3 ± 10.9 days. Forty-nine percent (n = 54) of patients had an associated risk factor, most commonly overnight use of contact lenses (n = 14, 13 %). Most common diagnosis at presentation was corneal epitheliopathy (68 %) followed by sterile infiltrates (10 %), CLARE (8 %) and microbial keratitis (6 %). No significant differences were found in the pattern of treatment modalities administered by ophthalmologists and other HCPs. HCPs other than ophthalmologists are the first contact for contact lens-related problems in a significant proportion of patients. These HCPs manage the majority of CLRC by direct treatment or immediate referral.

A sonification algorithm for developing the off-roads models for driving simulators

NASA Astrophysics Data System (ADS)

Chiroiu, Veturia; Brişan, Cornel; Dumitriu, Dan; Munteanu, Ligia

2018-01-01

In this paper, a sonification algorithm for developing the off-road models for driving simulators, is proposed. The aim of this algorithm is to overcome difficulties of heuristics identification which are best suited to a particular off-road profile built by measurements. The sonification algorithm is based on the stochastic polynomial chaos analysis suitable in solving equations with random input data. The fluctuations are generated by incomplete measurements leading to inhomogeneities of the cross-sectional curves of off-roads before and after deformation, the unstable contact between the tire and the road and the unreal distribution of contact and friction forces in the unknown contact domains. The approach is exercised on two particular problems and results compare favorably to existing analytical and numerical solutions. The sonification technique represents a useful multiscale analysis able to build a low-cost virtual reality environment with increased degrees of realism for driving simulators and higher user flexibility.

Charge carrier mobility in thin films of organic semiconductors by the gated van der Pauw method

PubMed Central

Rolin, Cedric; Kang, Enpu; Lee, Jeong-Hwan; Borghs, Gustaaf; Heremans, Paul; Genoe, Jan

2017-01-01

Thin film transistors based on high-mobility organic semiconductors are prone to contact problems that complicate the interpretation of their electrical characteristics and the extraction of important material parameters such as the charge carrier mobility. Here we report on the gated van der Pauw method for the simple and accurate determination of the electrical characteristics of thin semiconducting films, independently from contact effects. We test our method on thin films of seven high-mobility organic semiconductors of both polarities: device fabrication is fully compatible with common transistor process flows and device measurements deliver consistent and precise values for the charge carrier mobility and threshold voltage in the high-charge carrier density regime that is representative of transistor operation. The gated van der Pauw method is broadly applicable to thin films of semiconductors and enables a simple and clean parameter extraction independent from contact effects. PMID:28397852

Random Weighting, Strong Tracking, and Unscented Kalman Filter for Soft Tissue Characterization.

PubMed

Shin, Jaehyun; Zhong, Yongmin; Oetomo, Denny; Gu, Chengfan

2018-05-21

This paper presents a new nonlinear filtering method based on the Hunt-Crossley model for online nonlinear soft tissue characterization. This method overcomes the problem of performance degradation in the unscented Kalman filter due to contact model error. It adopts the concept of Mahalanobis distance to identify contact model error, and further incorporates a scaling factor in predicted state covariance to compensate identified model error. This scaling factor is determined according to the principle of innovation orthogonality to avoid the cumbersome computation of Jacobian matrix, where the random weighting concept is adopted to improve the estimation accuracy of innovation covariance. A master-slave robotic indentation system is developed to validate the performance of the proposed method. Simulation and experimental results as well as comparison analyses demonstrate that the efficacy of the proposed method for online characterization of soft tissue parameters in the presence of contact model error.

Simulations of roughness initiation and growth on railway rails

NASA Astrophysics Data System (ADS)

Sheng, X.; Thompson, D. J.; Jones, C. J. C.; Xie, G.; Iwnicki, S. D.; Allen, P.; Hsu, S. S.

2006-06-01

A model for the prediction of the initiation and growth of roughness on the rail is presented. The vertical interaction between a train and the track is calculated as a time history for single or multiple wheels moving on periodically supported rails, using a wavenumber-based approach. This vertical dynamic wheel/rail force arises from the varying stiffness due to discrete supports (i.e. parametric excitation) and the roughness excitation on the railhead. The tangential contact problem between the wheel and rail is modelled using an unsteady two-dimensional approach and also using the three-dimensional contact model, FASTSIM. This enables the slip and stick regions in the contact patch to be identified from the input geometry and creepage between the wheel and rail. The long-term wear growth is then predicted by applying repeated passages of the vehicle wheelsets, as part of an iterative solution.

Can a pairwise contact potential stabilize native protein folds against decoys obtained by threading?

PubMed

Vendruscolo, M; Najmanovich, R; Domany, E

2000-02-01

We present a method to derive contact energy parameters from large sets of proteins. The basic requirement on which our method is based is that for each protein in the database the native contact map has lower energy than all its decoy conformations that are obtained by threading. Only when this condition is satisfied one can use the proposed energy function for fold identification. Such a set of parameters can be found (by perceptron learning) if Mp, the number of proteins in the database, is not too large. Other aspects that influence the existence of such a solution are the exact definition of contact and the value of the critical distance Rc, below which two residues are considered to be in contact. Another important novel feature of our approach is its ability to determine whether an energy function of some suitable proposed form can or cannot be parameterized in a way that satisfies our basic requirement. As a demonstration of this, we determine the region in the (Rc, Mp) plane in which the problem is solvable, i.e., we can find a set of contact parameters that stabilize simultaneously all the native conformations. We show that for large enough databases the contact approximation to the energy cannot stabilize all the native folds even against the decoys obtained by gapless threading.

The mechanics of delamination in fiber-reinforced composite materials. I - Stress singularities and solution structure

NASA Technical Reports Server (NTRS)

Wang, S. S.; Choi, I.

1983-01-01

The fundamental mechanics of delamination in fiber composite laminates is studied. Mathematical formulation of the problem is based on laminate anisotropic elasticity theory and interlaminar fracture mechanics concepts. Stress singularities and complete solution structures associated with general composite delaminations are determined. For a fully open delamination with traction-free surfaces, oscillatory stress singularities always appear, leading to physically inadmissible field solutions. A refined model is introduced by considering a partially closed delamination with crack surfaces in finite-length contact. Stress singularities associated with a partially closed delamination having frictional crack-surface contact are determined, and are found to be different from the inverse square-root one of the frictionless-contact case. In the case of a delamination with very small area of crack closure, a simplified model having a square-root stress singularity is employed by taking the limit of the partially closed delamination. The possible presence of logarithmic-type stress singularity is examined; no logarithmic singularity of any kind is found in the composite delamination problem. Numerical examples of dominant stress singularities are shown for delaminations having crack-tip closure with different frictional coefficients between general (1) and (2) graphite-epoxy composites. Previously announced in STAR as N84-13221

Touchless attitude correction for satellite with constant magnetic moment

NASA Astrophysics Data System (ADS)

Ao, Hou-jun; Yang, Le-ping; Zhu, Yan-wei; Zhang, Yuan-wen; Huang, Huan

2017-09-01

Rescue of satellite with attitude fault is of great value. Satellite with improper injection attitude may lose contact with ground as the antenna points to the wrong direction, or encounter energy problems as solar arrays are not facing the sun. Improper uploaded command may set the attitude out of control, exemplified by Japanese Hitomi spacecraft. In engineering practice, traditional physical contact approaches have been applied, yet with a potential risk of collision and a lack of versatility since the mechanical systems are mission-specific. This paper puts forward a touchless attitude correction approach, in which three satellites are considered, one having constant dipole and two having magnetic coils to control attitude of the first. Particular correction configurations are designed and analyzed to maintain the target's orbit during the attitude correction process. A reference coordinate system is introduced to simplify the control process and avoid the singular value problem of Euler angles. Based on the spherical triangle basic relations, the accurate varying geomagnetic field is considered in the attitude dynamic mode. Sliding mode control method is utilized to design the correction law. Finally, numerical simulation is conducted to verify the theoretical derivation. It can be safely concluded that the no-contact attitude correction approach for the satellite with uniaxial constant magnetic moment is feasible and potentially applicable to on-orbit operations.

Military veterans with mental health problems: a protocol for a systematic review to identify whether they have an additional risk of contact with criminal justice systems compared with other veterans groups.

PubMed

Taylor, James; Parkes, Tessa; Haw, Sally; Jepson, Ruth

2012-11-06

There is concern that some veterans of armed forces, in particular those with mental health, drug or alcohol problems, experience difficulty returning to a civilian way of life and may subsequently come into contact with criminal justice services and imprisonment. The aim of this review is to examine whether military veterans with mental health problems, including substance use, have an additional risk of contact with criminal justice systems when compared with veterans who do not have such problems. The review will also seek to identify veterans' views and experiences on their contact with criminal justice services, what contributed to or influenced their contact and whether there are any differences, including international and temporal, in incidence, contact type, veteran type, their presenting health needs and reported experiences. In this review we will adopt a methodological model similar to that previously used by other researchers when reviewing intervention studies. The model, which we will use as a framework for conducting a review of observational and qualitative studies, consists of two parallel synthesis stages within the review process; one for quantitative research and the other for qualitative research. The third stage involves a cross study synthesis, enabling a deeper understanding of the results of the quantitative synthesis. A range of electronic databases, including MEDLINE, PsychINFO, CINAHL, will be systematically searched, from 1939 to present day, using a broad range of search terms that cover four key concepts: mental health, military veterans, substance misuse, and criminal justice. Studies will be screened against topic specific inclusion/exclusion criteria and then against a smaller subset of design specific inclusion/exclusion criteria. Data will be extracted for those studies that meet the inclusion criteria, and all eligible studies will be critically appraised. Included studies, both quantitative and qualitative, will then undergo stage-specific analysis and synthesis. The final stage will combine the findings of both syntheses to enable new understandings of why, how, and by how much, military veterans with mental health problems, including problematic drug and alcohol use, come into contact with the criminal justice system.

Mental disorders in childhood and young adulthood among children born to women with fertility problems.

PubMed

Svahn, M F; Hargreave, M; Nielsen, T S S; Plessen, K J; Jensen, S M; Kjaer, S K; Jensen, A

2015-09-01

Is the risk of hospital admission or outpatient contact for mental disorders increased in children born to women with fertility problems compared with children born to women without fertility problems? We found an increased risk of hospital admission or outpatient contact for mental disorders in children born to women with fertility problems. Few studies have investigated the risk of mental disorders in children born after fertility treatment and although some studies have pointed to an increased risk, others found no association. The inconsistent results may be due to methodological constraints in many previous studies, including small sample size and short follow-up, resulting in imprecise risk estimates and lack of information on risk patterns of mental disorders in adulthood. This nationwide retrospective register-based cohort study included all 2 412 721 children born in Denmark between 1969 and 2006. All children were followed from date of birth until date of hospital contact for a mental disorder, date of emigration, date of death or 31 December 2009, whichever occurred first. Information concerning maternal fertility status for all children in the cohort was obtained by linkage to the Danish Infertility Cohort, which contains data on nearly all women with fertility problems in Denmark since 1963. A total of 124 269 (5%) children were born to women with fertility problems and 2 288 452 (95%) to women without fertility problems. To identify children hospitalized for a mental disorder, the cohort was linked to the Danish Psychiatric Central Research Registry. Cox proportional hazards models were used to estimate hazard ratios (HRs) and 95% confidence intervals (CIs) for the association between maternal fertility status and the risk of hospital admission or outpatient contact for various groups of mental disorders, including any mental disorder and all 11 main discharge diagnostic groups, classified according to the International Classification of Diseases, version 10. During a mean follow-up period of 21 years (range, 0-40 years), 168 686 (7%) children were admitted to hospital or had an outpatient contact for a mental disorder. Children born to women with fertility problems had a significantly higher risk of any mental disorder (HR 1.23; 95% CI 1.20-1.26) and for most of the 11 main discharge groups, including schizophrenia (HR 1.16; 95% CI 1.07-1.27), mood (affective) disorders (HR 1.21; 95% CI 1.15-1.28) and disorders of psychological development (HR 1.15; 95% CI 1.09-1.21) as well as the subgroup of attention-deficit/hyperactivity disorders (HR 1.36; 95% CI 1.29-1.45) compared with children born to women without fertility problems. The risk estimates did not change markedly when analyses were performed separately for mental disorders diagnosed during childhood (0-19 years) and in young adulthood (20-40 years). The true risk of mental disorders may be somewhat underestimated, as only severe disorders requiring hospital admission or outpatient contact were considered as events. Furthermore, we could not determine whether the increased risks observed were due to factors related to the underlying infertility or to fertility treatment procedures. This is the first report on mental disorders in adulthood among children born to women with fertility problems. Furthermore, we have assessed the risk of several severe mental disorders not previously studied (e.g. neurotic, stress-related and somatoform disorders and disorders of adult personality and behaviour). These important findings should be investigated further in large epidemiological studies designed to differentiate between factors related to fertility treatment and to the underlying infertility. The study was supported by internal funding from the Unit of Virus, Lifestyle and Genes at the Danish Cancer Society Research Center. All authors report no conflicts of interest. © The Author 2015. Published by Oxford University Press on behalf of the European Society of Human Reproduction and Embryology. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Structural, Functional, and Metabolic Brain Markers Differentiate Collision versus Contact and Non-Contact Athletes

PubMed Central

Churchill, Nathan W.; Hutchison, Michael G.; Di Battista, Alex P.; Graham, Simon J.; Schweizer, Tom A.

2017-01-01

There is growing concern about how participation in contact sports affects the brain. Retrospective evidence suggests that contact sports are associated with long-term negative health outcomes. However, much of the research to date has focused on former athletes with significant health problems. Less is known about the health of current athletes in contact and collision sports who have not reported significant medical issues. In this cross-sectional study, advanced magnetic resonance imaging (MRI) was used to evaluate multiple aspects of brain physiology in three groups of athletes participating in non-contact sports (N = 20), contact sports (N = 22), and collision sports (N = 23). Diffusion tensor imaging was used to assess white matter microstructure based on measures of fractional anisotropy (FA) and mean diffusivity (MD); resting-state functional MRI was used to evaluate global functional connectivity; single-voxel spectroscopy was used to compare ratios of neural metabolites, including N-acetyl aspartate (NAA), creatine (Cr), choline, and myo-inositol. Multivariate analysis revealed structural, functional, and metabolic measures that reliably differentiated between sport groups. The collision group had significantly elevated FA and reduced MD in white matter, compared to both contact and non-contact groups. In contrast, the collision group showed significant reductions in functional connectivity and the NAA/Cr metabolite ratio, relative to only the non-contact group, while the contact group overlapped with both non-contact and collision groups. For brain regions associated with contact sport participation, athletes with a history of concussion also showed greater alterations in FA and functional connectivity, indicating a potential cumulative effect of both contact exposure and concussion history on brain physiology. These findings indicate persistent differences in brain physiology for athletes participating in contact and collision sports, which should be considered in future studies of concussion and subconcussive impacts. PMID:28878729

Lame problem for a multilayer viscoelastic hollow ball with regard to inhomogeneous aging

NASA Astrophysics Data System (ADS)

Davtyan, Z. A.; Mirzoyan, S. Y.; Gasparyan, A. V.

2018-04-01

Determination of characteristics of the stress strain state of compound viscoelastic bodies is of both theoretical and practical interest. In the present paper, the Lamé problem is investigated for an uneven-aged multilayer viscoelastic hollow ball in the framework of N. Kh. Arutyunyan’s theory of creep of nonhomogeneously aging bodies [1, 2]. Solving this problem reduces to solving an inhomogeneous finite-difference equation of second order that contains operators with coordinates of time and space. The obtained formulas allow one to determine the required contact stresses and other mechanical characteristics of the problem related to uneven age of contacting balls.

Sexual health problems and associated help-seeking behavior of people with physical disabilities and chronic diseases.

PubMed

Kedde, Harald; van de Wiel, Harry; Schultz, Willibrord Weijmar; Vanwesenbeeck, Ine; Bender, Jim

2012-01-01

The aim of this study was to investigate help-seeking behavior in relation to sexual problems among people with a disease or an impairment, as well as determining factors that promote people to seek professional sexological help. A total of 341 respondents (224 men, 117 women) participated. Approximately 50% wanted professional help with finding a sexual partner and sexual adjustment problems. Further, approximately 40% wanted professional help for problems in their sexual relationship, practical sexual problems, and the inability to enjoy their sexuality. In total, two third considered contacting a health care professional of which 35% had indeed had contact with a health care professional. Only a third of those evaluated these contacts as positive. To identify factors associated with the respondent's participation in psychosexual therapy, we performed a logistic regression analyses with a participation in a psychosexual intervention as the dependent variable. Sexual dissatisfaction was the strongest predictor of participation in psychosexual therapy. Furthermore, people who indicated that they wanted professional help for their sexual problems and people who had already discussed sexuality issues with a health care professional were more likely to participate. Disease and demographic characteristics did not influence one's decision to participate.

Aircraft Transparency Failure and Logistical Cost Analysis - Supplemental Study

DTIC Science & Technology

1979-06-01

trude studies, air logistics centers, A/F operational base level, vFM\\66-1 IDC M,44s, field audits , glazing materials, sealants 26. AOSTRACT (C oInu...W. R. Marshall of Reli- ability; and R. M. Hiyvaw, Mass Properties. The author wishes to thank the field audit contacts in the Air Force, in the...obtained from ALC’s and from field , audits , etc. do provide a data base from which predominant transpar- i ency maintenance problem- can be

Finite element analysis of steady and transiently moving/rolling nonlinear viscoelastic structure. II - Shell and three-dimensional simulations

NASA Technical Reports Server (NTRS)

Kennedy, Ronald; Padovan, Joe

1987-01-01

In a three-part series of papers, a generalized finite element solution strategy is developed to handle traveling load problems in rolling, moving and rotating structure. The main thrust of this section consists of the development of three-dimensional and shell type moving elements. In conjunction with this work, a compatible three-dimensional contact strategy is also developed. Based on these modeling capabilities, extensive analytical and experimental benchmarking is presented. Such testing includes traveling loads in rotating structure as well as low- and high-speed rolling contact involving standing wave-type response behavior. These point to the excellent modeling capabilities of moving element strategies.

An experimental evaluation of theory-based mother and mother-child programs for children of divorce.

PubMed

Wolchik, S A; West, S G; Sandler, I N; Tein, J Y; Coatsworth, D; Lengua, L; Weiss, L; Anderson, E R; Greene, S M; Griffin, W A

2000-10-01

This study evaluated the efficacy of 2 theory-based preventive interventions for divorced families: a program for mothers and a dual component mother-child program. The mother program targeted mother-child relationship quality, discipline, interparental conflict, and the father-child relationship. The child program targeted active coping, avoidant coping, appraisals of divorce stressors, and mother-child relationship quality. Families with a 9- to 12-year-old child (N = 240) were randomly assigned to the mother, dual-component, or self-study program. Postintervention comparisons showed significant positive program effects of the mother program versus self-study condition on relationship quality, discipline, attitude toward father-child contact, and adjustment problems. For several outcomes, more positive effects occurred in families with poorer initial functioning. Program effects on externalizing problems were maintained at 6-month follow-up. A few additive effects of the dual-component program occurred for the putative mediators; none occurred for adjustment problems.

A Feasibility Study on Numerical Modeling of Large-Scale Naval Fluid-Filled Structure: Contact-Impact Problems

DTIC Science & Technology

2011-02-01

capabilities for airbags , sensors, and seatbelts have tailored the code for applications in the automotive industry. Currently the code contains...larger intervals. In certain contact scenarios where contacting parts are moving relative to each other in a rapid fashion, such as airbag deployment

Establishment of a Cutting Fluid Control System (Phase 1)

DTIC Science & Technology

1981-01-01

that prevent or reduce welding of contacting areas and minimize both material transfer and generation of metallic debris within the contact zone...not on ceramic abrasives. Welding between ceramics and workpiece materials is, however, less of a problem than metal-metal contact phenomena in...fluid film (hatched area) - no wear and low friction. Mating surfaces contacting at asperities with local plastic deformation and welding - wear with

A numerical model of a HIL scaled roller rig for simulation of wheel-rail degraded adhesion condition

NASA Astrophysics Data System (ADS)

Conti, Roberto; Meli, Enrico; Pugi, Luca; Malvezzi, Monica; Bartolini, Fabio; Allotta, Benedetto; Rindi, Andrea; Toni, Paolo

2012-05-01

Scaled roller rigs used for railway applications play a fundamental role in the development of new technologies and new devices, combining the hardware in the loop (HIL) benefits with the reduction of the economic investments. The main problem of the scaled roller rig with respect to the full scale ones is the improved complexity due to the scaling factors. For this reason, before building the test rig, the development of a software model of the HIL system can be useful to analyse the system behaviour in different operative conditions. One has to consider the multi-body behaviour of the scaled roller rig, the controller and the model of the virtual vehicle, whose dynamics has to be reproduced on the rig. The main purpose of this work is the development of a complete model that satisfies the previous requirements and in particular the performance analysis of the controller and of the dynamical behaviour of the scaled roller rig when some disturbances are simulated with low adhesion conditions. Since the scaled roller rig will be used to simulate degraded adhesion conditions, accurate and realistic wheel-roller contact model also has to be included in the model. The contact model consists of two parts: the contact point detection and the adhesion model. The first part is based on a numerical method described in some previous studies for the wheel-rail case and modified to simulate the three-dimensional contact between revolute surfaces (wheel-roller). The second part consists in the evaluation of the contact forces by means of the Hertz theory for the normal problem and the Kalker theory for the tangential problem. Some numerical tests were performed, in particular low adhesion conditions were simulated, and bogie hunting and dynamical imbalance of the wheelsets were introduced. The tests were devoted to verify the robustness of control system with respect to some of the more frequent disturbances that may influence the roller rig dynamics. In particular we verified that the wheelset imbalance could significantly influence system performance, and to reduce the effect of this disturbance a multistate filter was designed.

Motion Trajectories for Wide-area Surveying with a Rover-based Distributed Spectrometer

NASA Technical Reports Server (NTRS)

Tunstel, Edward; Anderson, Gary; Wilson, Edmond

2006-01-01

A mobile ground survey application that employs remote sensing as a primary means of area coverage is highlighted. It is distinguished from mobile robotic area coverage problems that employ contact or proximity-based sensing. The focus is on a specific concept for performing mobile surveys in search of biogenic gases on planetary surfaces using a distributed spectrometer -- a rover-based instrument designed for wide measurement coverage of promising search areas. Navigation algorithms for executing circular and spiral survey trajectories are presented for widearea distributed spectroscopy and evaluated based on area covered and distance traveled.

Two-phase Hele-Shaw flow with a moving contact line

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weinstein, S.J.; Ungar, L.H.; Dussan, E.B.

1988-01-01

An asymptotic analysis is presented for Hele-Shaw viscous fingering with a moving contact line at flow rates. As in problems where a thin film is present instead of a contact line, the narrow gap limit is nonuniform, and interfacial boundary conditions valid for the Hele-Shaw equations must be determined in order to predict the flow field and interface shape. Many well-posed boundary-value problems can be identified, each corresponding to a different flow regime characterized by the relative sizes of the capillary number (dimensionless velocity) and the dimensionless gap width. These problems incorporate terms corresponding to the gapwise component of themore » interfacial curvature (the curvature in the cross-sectional view of the Hele-Shaw cell) and spanwise curvature (seen in the top view of the cell) in different ways. Nonunique interface solutions typically arise as in the analogous thin film problems. The relationships between the curvature terms, the spectra of allowable solutions, and the implications for stability are discussed.« less

OCT-based angiography in real time with hand-held probe

NASA Astrophysics Data System (ADS)

Gelikonov, Grigory V.; Moiseev, Alexander A.; Ksenofontov, Sergey Y.; Terpelov, Dmitry A.; Gelikonov, Valentine M.

2018-03-01

This work is dedicated to development of the OCT system capable to visualize blood vessel network for everyday clinical use. Following problems were solved during the development: compensation of specific natural tissue displacements, induced by contact scanning mode and physiological motion of patients (e.g. respiratory and cardiac motions) and on-line visualization of vessel net to provide the feedback for system operator.

A Proposal for Methodology for Negotiation Practicum with Effective Use of ICT: A Technology Enhanced Course for Communication for Trust Building

ERIC Educational Resources Information Center

Yamamoto, Tosh; Tagami, Masanori; Nakazawa, Minoru

2012-01-01

This paper purports to demonstrate a problem solving case in the course of the development of methodology, in which the quality of the negotiation practicum is maintained or raised without sacrificing the class contact hours for the lessons for reading comprehension skills, on which the essence of negotiation practicum is solely based. In this…

Help-seeking intentions for early signs of mental illness and their associated factors: comparison across four kinds of health problems.

PubMed

Suka, Machi; Yamauchi, Takashi; Sugimori, Hiroki

2016-04-07

Failure and delay in initial treatment contact for mental disorders has been recognized as an important public health problem. According to the concept of mental health literacy, recognition of symptoms is crucial to making decisions to seek or not seek professional help. The aims of this study were to investigate the types of health problems for which Japanese adults intend to seek help, their preferred sources of help, and the factors associated with help-seeking intentions. A cross-sectional web-based survey was conducted in June 2014 among Japanese adults aged 20-59 years. A total of 3308 eligible respondents were included in this study. Help-seeking intentions were measured by listing potential sources of help (including 'would not receive help') and asking which ones would be chosen in four health conditions indicated by irritability, dizziness, insomnia, and depressed mood, respectively. In the case of dizziness, 85.9% of the participants reported a positive help-seeking intention and 42.7% gave first priority to seeking help from formal sources. These percentages were smaller in the cases of insomnia (75.4 and 25.0%), depressed mood (74.9 and 18.7%), and irritability (72.9 and 0.9%). Multiple logistic regression analysis revealed that the factors significantly associated with help-seeking intentions were almost identical across the four health problems. In particular, perception of family and friends regarding help-seeking, psychiatric history, contact with people with mental illness, better health literacy, and neighborhood communicativeness were significantly associated with the overall help-seeking intention and also the help-seeking intention from formal sources for all the problems of dizziness, insomnia, and depressed mood. The majority of participants indicated their intentions to seek help, but psychological problems (insomnia and depressed mood) were less likely to induce help-seeking intentions than a physical problem (dizziness). Besides developing health literacy skills, community-based interventions for creating a friendly approachable atmosphere and facilitating daily interactions with family, friends, and neighbors may be worth considering as a possible public health strategy for encouraging help-seeking whether for psychological or physical problems.

SAM Technical Contacts

EPA Pesticide Factsheets

These technical contacts are available to help with questions regarding method deviations, modifications, sample problems or interferences, quality control requirements, the use of alternative methods, or the need to address analytes or sample types.

Laws of spreading: When hydrodynamic equations are not enough

NASA Astrophysics Data System (ADS)

Kavehpour, Pirouz; Mohammad Karim, Alireza; Rothstein, Jonathan; Davis, Stephen

2017-11-01

For nearly 50 years, most of the researchers in the area of wetting and spreading have used a relationship between the dynamics contact angle and velocity and the equilibrium contact angle. Different forms of this relationship are known as Tanner's law, Hoffman-Voinov-Tanner law or Cox model, all of them are derived based on hydrodynamics assumptions. In this talk, we will discuss several common situations that this relationship is not valid and we propose a new way to look at spreading problem and its underlying physics. Our experimental result agrees with this interpretation of spreading dynamics. In addition, the experimental study has been performed using forced spreading with tensiometer to obtain the dependence of dynamic contact angle to the contact line velocity to describe the spreading dynamics of Newtonian liquids on the micro-textured surfaces. The effect of the geometrical descriptions of the micro-posts along with the physical properties of liquids on the spreading dynamics on micro-textured Teflon plates have been also studied. It was shown that hydrodynamic results are not valid for certain combination of fluid/solid systems.

Large deformation frictional contact analysis with immersed boundary method

NASA Astrophysics Data System (ADS)

Navarro-Jiménez, José Manuel; Tur, Manuel; Albelda, José; Ródenas, Juan José

2018-01-01

This paper proposes a method of solving 3D large deformation frictional contact problems with the Cartesian Grid Finite Element Method. A stabilized augmented Lagrangian contact formulation is developed using a smooth stress field as stabilizing term, calculated by Zienckiewicz and Zhu Superconvergent Patch Recovery. The parametric definition of the CAD surfaces (usually NURBS) is considered in the definition of the contact kinematics in order to obtain an enhanced measure of the contact gap. The numerical examples show the performance of the method.

2012 Survey of Reserve Components Spouses (RCSS): Tabulations of Responses

DTIC Science & Technology

2012-09-30

injury/medical problems Child care problems Other family/personal obligation Maternity / paternity leave Labor dispute Weather affected job School...Did you interact with the unit or Service point of contact? ............................. 262  36.  How satisfied are you with the level of assistance...I did not interact with the unit or Service point of contact were tabulated separately, as responses to the constructed question Did you interact

Learning Grasp Strategies Composed of Contact Relative Motions

NASA Technical Reports Server (NTRS)

Platt, Robert, Jr.

2007-01-01

Of central importance to grasp synthesis algorithms are the assumptions made about the object to be grasped and the sensory information that is available. Many approaches avoid the issue of sensing entirely by assuming that complete information is available. In contrast, this paper proposes an approach to grasp synthesis expressed in terms of units of control that simultaneously change the contact configuration and sense information about the object and the relative manipulator-object pose. These units of control, known as contact relative motions (CRMs), allow the grasp synthesis problem to be recast as an optimal control problem where the goal is to find a strategy for executing CRMs that leads to a grasp in the shortest number of steps. An experiment is described that uses Robonaut, the NASA-JSC space humanoid, to show that CRMs are a viable means of synthesizing grasps. However, because of the limited amount of information that a single CRM can sense, the optimal control problem may be partially observable. This paper proposes expressing the problem as a k-order Markov Decision Process (MDP) and solving it using Reinforcement Learning. This approach is tested in a simulation of a two-contact manipulator that learns to grasp an object. Grasp strategies learned in simulation are tested on the physical Robonaut platform and found to lead to grasp configurations consistently.

A strongly goal-directed close-range vision system for spacecraft docking

NASA Technical Reports Server (NTRS)

Boyer, Kim L.; Goddard, Ralph E.

1991-01-01

In this presentation, we will propose a strongly goal-oriented stereo vision system to establish proper docking approach motions for automated rendezvous and capture (AR&C). From an input sequence of stereo video image pairs, the system produces a current best estimate of: contact position; contact vector; contact velocity; and contact orientation. The processing demands imposed by this particular problem and its environment dictate a special case solution; such a system should necessarily be, in some sense, minimalist. By this we mean the system should construct a scene description just sufficiently rich to solve the problem at hand and should do no more processing than is absolutely necessary. In addition, the imaging resolution should be just sufficient. Extracting additional information and constructing higher level scene representations wastes energy and computational resources and injects an unnecessary degree of complexity, increasing the likelihood of malfunction. We therefore take a departure from most prior stereopsis work, including our own, and propose a system based on associative memory. The purpose of the memory is to immediately associate a set of motor commands with a set of input visual patterns in the two cameras. That is, rather than explicitly computing point correspondences and object positions in world coordinates and trying to reason forward from this information to a plan of action, we are trying to capture the essence of reflex behavior through the action of associative memory. The explicit construction of point correspondences and 3D scene descriptions, followed by online velocity and point of impact calculations, is prohibitively expensive from a computational point of view for the problem at hand. Learned patterns on the four image planes, left and right at two discrete but closely spaced instants in time, will be bused directly to infer the spacecraft reaction. This will be a continuing online process as the docking collar approaches.

A class of fractional differential hemivariational inequalities with application to contact problem

NASA Astrophysics Data System (ADS)

Zeng, Shengda; Liu, Zhenhai; Migorski, Stanislaw

2018-04-01

In this paper, we study a class of generalized differential hemivariational inequalities of parabolic type involving the time fractional order derivative operator in Banach spaces. We use the Rothe method combined with surjectivity of multivalued pseudomonotone operators and properties of the Clarke generalized gradient to establish existence of solution to the abstract inequality. As an illustrative application, a frictional quasistatic contact problem for viscoelastic materials with adhesion is investigated, in which the friction and contact conditions are described by the Clarke generalized gradient of nonconvex and nonsmooth functionals, and the constitutive relation is modeled by the fractional Kelvin-Voigt law.

Kalker's algorithm Fastsim solves tangential contact problems with slip-dependent friction and friction anisotropy

NASA Astrophysics Data System (ADS)

Piotrowski, J.

2010-07-01

This paper presents two extensions of Kalker's algorithm Fastsim of the simplified theory of rolling contact. The first extension is for solving tangential contact problems with the coefficient of friction depending on slip velocity. Two friction laws have been considered: with and without recuperation of the static friction. According to the tribological hypothesis for metallic bodies shear failure, the friction law without recuperation of static friction is more suitable for wheel and rail than the other one. Sample results present local quantities inside the contact area (division to slip and adhesion, traction) as well as global ones (creep forces as functions of creepages and rolling velocity). For the coefficient of friction diminishing with slip, the creep forces decay after reaching the maximum and they depend on the rolling velocity. The second extension is for solving tangential contact problems with friction anisotropy characterised by a convex set of the permissible tangential tractions. The effect of the anisotropy has been shown on examples of rolling without spin and in the presence of pure spin for the elliptical set. The friction anisotropy influences tangential tractions and creep forces. Sample results present local and global quantities. Both extensions have been described with the same language of formulation and they may be merged into one, joint algorithm.

[Contact allergies in musicians].

PubMed

Gasenzer, E R; Neugebauer, E A M

2012-12-01

During the last years, the problem of allergic diseases has increased. Allergies are errant immune responses to a normally harmless substance. In musicians the allergic contact dermatitis to exotic woods is a special problem. Exotic rosewood contains new flavonoids, which trigger an allergic reaction after permanent contact with the instrument. High quality woodwind instruments such as baroque flute or clarinets are made in ebony or palisander because of its great sound. Today instruments for non-professional players are also made in these exotic materials and non-professionals may have the risk to develop contact dermatitis, too. Brass-player has the risk of an allergic reaction to the different metals contained in the metal sheets of modern flutes and brass instruments. Specially nickel and brass alloys are used to product flute tubes or brass instruments. Special problem arises in children: patients who are allergic to plants or foods have a high risk to develop contact dermatitis. Parents don't know the materials of low-priced instruments for beginners. Often unknown cheap woods from exotic areas are used. Low-priced brass instruments contain high amount of brass and other cheap metals. Physicians should advice musician-patients or parents about the risks of the different materials and look for the reason of eczema on mouth, face, or hands. © Georg Thieme Verlag KG Stuttgart · New York.

A meta-review of Internet computer-based psychological treatments for anxiety disorders.

PubMed

Peñate, Wenceslao; Fumero, Ascensión

2016-01-01

Internet computer-based psychological treatments have enjoyed rapid growth. Today, there are a number of them available for many mental disorders and psychological problems. Internet-based psychological treatments for anxiety disorders and phobias are amongst the most frequently observed. Treatment results with these resources are promising, but inconclusive. This paper reviews 11 systematic reviews and meta-analyses about the efficacy of Internet-based psychological treatments for anxiety disorders, including studies and clinical trials covering the majority of anxiety disorders and phobias, usually with adult patient samples. In general, these reviews agree on the efficacy of Internet-based psychological treatment as compared with non-treatment groups (with large effect sizes), finding similar efficacy compared with face-to-face therapies. Internet-based psychological treatments are further improved when combined with some type of therapist contact. On the negative side, some systematic reviews highlight high attrition rates of Internet-based psychological treatments. These findings remain inconclusive and more refined reviews (involving patient samples, therapy comparisons, type of therapist contact, etc.) are needed, in order to establish the scope and limits of Internet-based psychological treatments for anxiety disorders. © The Author(s) 2015.

Development and experimental characterization of a new non contact sensor for blade tip timing

NASA Astrophysics Data System (ADS)

Brouckaert, Jean-Francois; Marsili, Roberto; Rossi, Gianluca; Tomassini, Roberto

2012-06-01

Performances of blade tip timing measurement systems (BTT), recently used for non contact turbine blade vibration measurements, in terms of uncertainty and resolution are strongly affected by sensor characteristics. The sensors used for BTT generate pulses, to be used also for precise measurements of turbine blades time of arrival. All the literature on this measurement techniques do not address this problem in a clear way, defining the relevant dynamic and static sensor characteristics, fundamental for this application. Till now proximity sensors used are based on optical, capacitive, eddy current and microwave measuring principle. Also pressure sensors has been used. In this paper a new sensing principle is proposed. A proximity sensor based on magnetoresistive sensing element has been assembled end tested. A simple and portable test bench with variable speed, blade tip width, variable clearance was built and used in order to characterize the main sensor performances.

Thermophysical Properties Measurements of Zr62Cu20Al10Ni8

NASA Technical Reports Server (NTRS)

Bradshaw, Richard C.; Waren, Mary; Rogers, Jan R.; Rathz, Thomas J.; Gangopadhyay, Anup K.; Kelton, Ken F.; Hyers, Robert W.

2006-01-01

Thermophysical property studies performed at high temperature can prove challenging because of reactivity problems brought on by the elevated temperatures. Contaminants from measuring devices and container walls can cause changes in properties. To prevent this, containerless processing techniques can be employed to isolate a sample during study. A common method used for this is levitation. Typical levitation methods used for containerless processing are, aerodynamically, electromagnetically and electrostatically based. All levitation methods reduce heterogeneous nucleation sites, 'which in turn provide access to metastable undercooled phases. In particular, electrostatic levitation is appealing because sample motion and stirring are minimized; and by combining it with optically based non-contact measuring techniques, many thermophysical properties can be measured. Applying some of these techniques, surface tension, viscosity and density have been measured for the glass forming alloy Zr62Cu20Al10Ni8 and will be presented with a brief overview of the non-contact measuring method used.

Governing Influence of Thermodynamic and Chemical Equilibria on the Interfacial Properties in Complex Fluids.

PubMed

Harikrishnan, A R; Dhar, Purbarun; Gedupudi, Sateesh; Das, Sarit K

2018-04-12

We propose a comprehensive analysis and a quasi-analytical mathematical formalism to predict the surface tension and contact angles of complex surfactant-infused nanocolloids. The model rests on the foundations of the interaction potentials for the interfacial adsorption-desorption dynamics in complex multicomponent colloids. Surfactant-infused nanoparticle-laden interface problems are difficult to deal with because of the many-body interactions and interfaces involved at the meso-nanoscales. The model is based on the governing role of thermodynamic and chemical equilibrium parameters in modulating the interfacial energies. The influence of parameters such as the presence of surfactants, nanoparticles, and surfactant-capped nanoparticles on interfacial dynamics is revealed by the analysis. Solely based on the knowledge of interfacial properties of independent surfactant solutions and nanocolloids, the same can be deduced for complex surfactant-based nanocolloids through the proposed approach. The model accurately predicts the equilibrium surface tension and contact angle of complex nanocolloids available in the existing literature and present experimental findings.

Tea Tree Oil

MedlinePlus

... oil without problems, but some people may develop contact dermatitis (an allergic skin rash) or skin irritation on ... References Jack AR, Norris PL, Storrs FJ. Allergic contact dermatitis to plant extracts in cosmetics . Seminars in Cutaneous ...

Extensive internet involvement--addiction or emerging lifestyle?

PubMed

Bergmark, Karin Helmersson; Bergmark, Anders; Findahl, Olle

2011-12-01

In the discussions for the future DSM-5, the Substance-Related Disorders Work Group has been addressing "addiction-like" behavioral disorders such as "Internet addiction" to possibly be considered as potential additions for the diagnostic system. Most research aiming to specify and define the concept of Internet addiction (or: Excessive/Compulsive/Problematic Internet Use--PIU), takes its point of departure in conventional terminology for addiction, based in established DSM indicators. Still, it is obvious that the divide between characteristics of addiction and dimensions of new lifestyles built on technological progress is problematic and far from unambiguous. Some of these research areas are developing from the neurobiological doctrine of addiction as not being tied to specific substances. The concept of "behavioral addictions", based on biological mechanisms such as the reward systems of the brain, has been launched. The problems connected to this development are in this study discussed and reflected with data from a Swedish survey on Internet use (n = 1,147). Most Swedes (85%) do use the Internet to some degree. The prevalence of excessive use parallels other similar countries. Respondents in our study spend (mean value) 9.8 hours per week online at home, only 5 percent spend more than 30 hours per week. There are both positive and negative social effects at hand. Many respondents have more social contacts due to the use of Internet, but there is a decline in face-to-face contacts. About 40% of the respondents indicate some experience of at least one problem related to Internet use, but only 1.8% marked the presence of all problems addressed. Most significant predictors for problem indicators, except for age, relate to "time" and time consuming activities such as gaming, other activities online or computer skills.

Extensive Internet Involvement—Addiction or Emerging Lifestyle?

PubMed Central

Bergmark, Karin Helmersson; Bergmark, Anders; Findahl, Olle

2011-01-01

In the discussions for the future DSM-5, the Substance-Related Disorders Work Group has been addressing “addiction-like” behavioral disorders such as “Internet addiction” to possibly be considered as potential additions for the diagnostic system. Most research aiming to specify and define the concept of Internet addiction (or: Excessive/Compulsive/Problematic Internet Use—PIU), takes its point of departure in conventional terminology for addiction, based in established DSM indicators. Still, it is obvious that the divide between characteristics of addiction and dimensions of new lifestyles built on technological progress is problematic and far from unambiguous. Some of these research areas are developing from the neurobiological doctrine of addiction as not being tied to specific substances. The concept of “behavioral addictions”, based on biological mechanisms such as the reward systems of the brain, has been launched. The problems connected to this development are in this study discussed and reflected with data from a Swedish survey on Internet use (n = 1,147). Most Swedes (85%) do use the Internet to some degree. The prevalence of excessive use parallels other similar countries. Respondents in our study spend (mean value) 9.8 hours per week online at home, only 5 percent spend more than 30 hours per week. There are both positive and negative social effects at hand. Many respondents have more social contacts due to the use of Internet, but there is a decline in face-to-face contacts. About 40% of the respondents indicate some experience of at least one problem related to Internet use, but only 1.8% marked the presence of all problems addressed. Most significant predictors for problem indicators, except for age, relate to “time” and time consuming activities such as gaming, other activities online or computer skills. PMID:22408585

Disaster and subsequent healthcare utilization: a longitudinal study among victims, their family members, and control subjects.

PubMed

Dorn, Tina; Yzermans, C Joris; Kerssens, Jan J; Spreeuwenberg, Peter M M; van der Zee, Jouke

2006-06-01

The impact of disasters on primary healthcare utilization is largely unknown. Moreover, it is often overlooked how disaster affects those closest to the primary victims, their family members. The objective of this study was to examine the long-term effects of a catastrophic fire on primary healthcare utilization. We conducted a prospective, population-based cohort study covering 1 year pre- and 3 years postfire. Utilization data were extracted from primary care records. Subjects consisted of 286 disaster victims, 802 family members of disaster victims, 3722 community control subjects, and 10,230 patients from a national reference population. As outcome measures, we studied 1) the annual number of contacts in primary care and 2) the annual number of contacts for problems related to mental health. Determinants are injury characteristics of victims and bereavement. All analyses control for age, gender, and insurance status. Being an uninjured victim who witnessed the disaster increases the number of contacts by a factor of 1.55 during the first year postfire (95% confidence interval [CI], 1.35-1.78). Uninjured victims contact the family practitioner more often for mental health-related problems than adolescent community control subjects (incidence rate ratio [IRR], 4.54; 95% CI, 1.69-12.20). In adult family members, the loss of a child predicts overall utilization (IRR, 1.88; 95% CI, 1.35-2.63) and utilization for mental health (IRR, 8.69; 95% CI, 2.10-35.92) during the first year postfire. Attention should be paid to the primary care needs of bereaved individuals and those who have witnessed the disaster.

Metal-clad waveguide characterization for contact-based light transmission into tissue

NASA Astrophysics Data System (ADS)

Chininis, Jeffrey; Whiteside, Paul; Hunt, Heather K.

2016-02-01

As contemporary laser dermatology procedures, like tattoo removal and skin resurfacing, become more popular, the complications of their operation are also becoming more prevalent. Frequent incidences of over-exposure, ocular injury, and excessive thermal damage represent mounting concerns for those seeking such procedures; moreover, each of these problems is a direct consequence of the standard, free-space method of laser transmission predominantly used in clinical settings. Therefore, an alternative method of light transmission is needed to minimize these problems. Here, we demonstrate and characterize an alternative method that uses planar waveguides to deliver light into sample tissue via direct contact. To do this, slab substrates made from glass were clad in layers of titanium and silver, constraining the light within the waveguide along the waveguide's length. By creating active areas on the waveguide surface, the propagating light could then optically tunnel into the tissue sample, when the waveguide was brought into contact with the tissue. SEM and EDS were used to characterize the metal film thickness and deposition rates onto the glass substrates. Laser light from a Q-switched Nd:YAG source operating at 532nm was coupled into the waveguide and transmitted into samples of pig skin. The amount of light transmitted was measured using photoacoustics techniques, in conjunction with a photodiode and integrating sphere. Transmitting light into tissue in this manner effectively resolves or circumvents the complications caused by free-space propagation methods as it reduces the operating distance to 0, which prevents hazardous back-reflections and allows for the ready incorporation of contact cooling technologies.

Metallization problems with concentrator cells

NASA Technical Reports Server (NTRS)

Iles, P. A.

1983-01-01

Cells used with concentrators have similar contact requirements to other cells, but operation at high intensity imposes more than the usual demands on the metallization. Overall contact requirements are listed and concentrator cell requirements are discussed.

Contact stresses in pin-loaded orthotropic plates

NASA Technical Reports Server (NTRS)

Hyer, M. W.; Klang, E. C.

1984-01-01

The effects of pin elasticity, friction, and clearance on the stresses near the hole in a pin-loaded orthotropic plate are described. The problem is modeled as a contact elasticity problem using complex variable theory, the pin and the plate being two elastic bodies interacting through contact. This modeling is in contrast to previous works which assumed that the pin is rigid or that it exerts a known cosinusoidal radial traction on the hole boundary. Neither of these approaches explicitly involves a pin. A collocation procedure and iteration were used to obtain numerical results for a variety of plate and pin elastic properties and various levels of friction and clearance. Collocation was used to enforce the boundary and iteration was used to find the contact and no-slip regions on the boundary. Details of the numerical scheme are discussed.

'Just because a doctor says something, doesn't mean that [it] will happen': self-perception as having a Fertility Problem among Infertility Patients.

PubMed

Leyser-Whalen, Ophra; Greil, Arthur L; McQuillan, Julia; Johnson, Katherine M; Shrefffler, Karina M

2018-03-01

Only some individuals who have the medically defined condition 'infertility' adopt a self-definition as having a fertility problem, which has implications for social and behavioural responses, yet there is no clear consensus on why some people and not others adopt a medical label. We use interview data from 28 women and men who sought medical infertility treatment to understand variations in self-identification. Results highlight the importance of identity disruption for understanding the dialectical relationship between medical contact and self-identification, as well as how diagnosis acts both as a category and a process. Simultaneously integrating new medical knowledge from testing and treatment with previous fertility self-perceptions created difficulty for settling on an infertility self-perception. Four response categories emerged for adopting a self-perception of having a fertility problem: (i) the non-adopters - never adopting the self-perception pre- or post-medical contact; (ii) uncertain - not being fully committed to the self-perception pre- or post-medical contact; (iii) assuming the label - not having prior fertility concerns but adopting the self-perception post-medical contact; and (iv) solidifying a tentative identity - not being fully committed to a self-perception pre-medical contact, but fully committed post-medical contact. (A virtual abstract of this paper can be viewed at: https://www.youtube.com/channel/UC_979cmCmR9rLrKuD7z0ycA). © 2017 Foundation for the Sociology of Health & Illness.

Globalisation and allergy.

PubMed

Castelain, Michel

2011-01-01

Globalisation brings patients more and more into contact with products or food from other cultures or countries. Europeans may be confronted with allergens not yet known in Europe - such as dimethylfumarate - responsible for contact allergy epidemics. Moreover, "low cost" goods, not always legally imported into Europe, sometimes may lead to European legislation being circumvented and thus bring our patients into contact with components that have been banned from manufacturing processes or strongly regulated, such as nickel in jewelry or telephones, some colouring agents in clothes or preservatives in cosmetics. Disinfection measures for freight containers arriving from other continents into our harbours lead to fumigants and other toxic products contaminating the air and the transported products or goods. Globalisation can not only elicit contact allergy but also airborne contact dermatitis or food allergy. The aim of this paper is not to make an exhaustive review of cutaneous allergic problems elicited by globalisation, but to illustrate this new worldwide problem with a few meaningful examples.

Non-oscillatory and non-diffusive solution of convection problems by the iteratively reweighted least-squares finite element method

NASA Technical Reports Server (NTRS)

Jiang, Bo-Nan

1993-01-01

A comparative description is presented for the least-squares FEM (LSFEM) for 2D steady-state pure convection problems. In addition to exhibiting better control of the streamline derivative than the streamline upwinding Petrov-Galerkin method, numerical convergence rates are obtained which show the LSFEM to be virtually optimal. The LSFEM is used as a framework for an iteratively reweighted LSFEM yielding nonoscillatory and nondiffusive solutions for problems with contact discontinuities; this method is shown to convect contact discontinuities without error when using triangular and bilinear elements.

Occupational allergic contact dermatitis from epoxy resin in a golf club repairman.

PubMed

Isaksson, Marléne; Möller, Halvor; Pontén, Ann

2008-01-01

A golfer presented with facial and hand eczema. He had exacerbations of his hand eczema prior to golf tournaments. Being an authorized golf club repairman, he had been working with a two-part glue containing an epoxy resin (ER) based on diglycidyl ether of bisphenol A (DGEBA) and the hardener diethylenetriamine (DETA) for approximately 4 years before he developed any skin problems. He was patch-tested with the standard, which contains an ER based on DGEBA (DGEBA-R), epoxy (containing DETA), and rubber glove series and had positive reactions to DGEBA-R only. Other work materials (a latex glove, a golf glove made of leather, and part of the handle of his own golf club "as is" and in a methyl tert-butyl ether extract) were tested, with negative results. Allergic contact dermatitis from ER affects the skin by direct contact; the dermatitis is usually localized to the hands and forearms. If the face and eyelids are involved, the dermatitis may be due to exposure to airborne hardeners or reactive diluents, exposure to airborne dust from residual monomers, or ectopic allergic reactions. Our repairman had sandpapered an old glued surface, which may have led to possible airborne dust formation, thus explaining the facial eczema. Therefore, a worker with contact allergy to ER may continue working provided the skin is protected from contamination.

Extraterrestrial civilizations: Problems of their evolution

NASA Technical Reports Server (NTRS)

Leskov, L. V.

1987-01-01

The problem of finding extraterrestrial civilizations and establishing contact with them is directly related to the problem of their evolution. Possible patterns in this evolution and the stages in the evolution of extraterrestrial civilizations are examined.

Dual-joint modeling for estimation of total knee replacement contact forces during locomotion.

PubMed

Hast, Michael W; Piazza, Stephen J

2013-02-01

Model-based estimation of in vivo contact forces arising between components of a total knee replacement is challenging because such forces depend upon accurate modeling of muscles, tendons, ligaments, contact, and multibody dynamics. Here we describe an approach to solving this problem with results that are tested by comparison to knee loads measured in vivo for a single subject and made available through the Grand Challenge Competition to Predict in vivo Tibiofemoral Loads. The approach makes use of a "dual-joint" paradigm in which the knee joint is alternately represented by (1) a ball-joint knee for inverse dynamic computation of required muscle controls and (2) a 12 degree-of-freedom (DOF) knee with elastic foundation contact at the tibiofemoral and patellofemoral articulations for forward dynamic integration. Measured external forces and kinematics were applied as a feedback controller and static optimization attempted to track measured knee flexion angles and electromyographic (EMG) activity. The resulting simulations showed excellent tracking of knee flexion (average RMS error of 2.53 deg) and EMG (muscle activations within ±10% envelopes of normalized measured EMG signals). Simulated tibiofemoral contact forces agreed qualitatively with measured contact forces, but their RMS errors were approximately 25% of the peak measured values. These results demonstrate the potential of a dual-joint modeling approach to predict joint contact forces from kinesiological data measured in the motion laboratory. It is anticipated that errors in the estimation of contact force will be reduced as more accurate subject-specific models of muscles and other soft tissues are developed.

High-performance biocomputing for simulating the spread of contagion over large contact networks

PubMed Central

2012-01-01

Background Many important biological problems can be modeled as contagion diffusion processes over interaction networks. This article shows how the EpiSimdemics interaction-based simulation system can be applied to the general contagion diffusion problem. Two specific problems, computational epidemiology and human immune system modeling, are given as examples. We then show how the graphics processing unit (GPU) within each compute node of a cluster can effectively be used to speed-up the execution of these types of problems. Results We show that a single GPU can accelerate the EpiSimdemics computation kernel by a factor of 6 and the entire application by a factor of 3.3, compared to the execution time on a single core. When 8 CPU cores and 2 GPU devices are utilized, the speed-up of the computational kernel increases to 9.5. When combined with effective techniques for inter-node communication, excellent scalability can be achieved without significant loss of accuracy in the results. Conclusions We show that interaction-based simulation systems can be used to model disparate and highly relevant problems in biology. We also show that offloading some of the work to GPUs in distributed interaction-based simulations can be an effective way to achieve increased intra-node efficiency. PMID:22537298

Needed Research in the Fields of Psycho- and Socio-Linguistics as They Relate to the Instruction of Minority Children in the Bilingual Education Programs of North American Schools.

ERIC Educational Resources Information Center

Viera, Silvia

This paper discusses the conflict occurring as a result of two languages and their corresponding cultural bases coming into contact in North America, particularly in the context of bilingual education. Difficulty exists in translating awareness of problems such as language interference, cultural shock, and lowered self-image into attitudinal…

Trajectory Correction and Locomotion Analysis of a Hexapod Walking Robot with Semi-Round Rigid Feet

PubMed Central

Zhu, Yaguang; Jin, Bo; Wu, Yongsheng; Guo, Tong; Zhao, Xiangmo

2016-01-01

Aimed at solving the misplaced body trajectory problem caused by the rolling of semi-round rigid feet when a robot is walking, a legged kinematic trajectory correction methodology based on the Least Squares Support Vector Machine (LS-SVM) is proposed. The concept of ideal foothold is put forward for the three-dimensional kinematic model modification of a robot leg, and the deviation value between the ideal foothold and real foothold is analyzed. The forward/inverse kinematic solutions between the ideal foothold and joint angular vectors are formulated and the problem of direct/inverse kinematic nonlinear mapping is solved by using the LS-SVM. Compared with the previous approximation method, this correction methodology has better accuracy and faster calculation speed with regards to inverse kinematics solutions. Experiments on a leg platform and a hexapod walking robot are conducted with multi-sensors for the analysis of foot tip trajectory, base joint vibration, contact force impact, direction deviation, and power consumption, respectively. The comparative analysis shows that the trajectory correction methodology can effectively correct the joint trajectory, thus eliminating the contact force influence of semi-round rigid feet, significantly improving the locomotion of the walking robot and reducing the total power consumption of the system. PMID:27589766

An artificial nonlinear diffusivity method for supersonic reacting flows with shocks

NASA Astrophysics Data System (ADS)

Fiorina, B.; Lele, S. K.

2007-03-01

A computational approach for modeling interactions between shocks waves, contact discontinuities and reactions zones with a high-order compact scheme is investigated. To prevent the formation of spurious oscillations around shocks, artificial nonlinear viscosity [A.W. Cook, W.H. Cabot, A high-wavenumber viscosity for high resolution numerical method, J. Comput. Phys. 195 (2004) 594-601] based on high-order derivative of the strain rate tensor is used. To capture temperature and species discontinuities a nonlinear diffusivity based on the entropy gradient is added. It is shown that the damping of 'wiggles' is controlled by the model constants and is largely independent of the mesh size and the shock strength. The same holds for the numerical shock thickness and allows a determination of the L2 error. In the shock tube problem, with fluids of different initial entropy separated by the diaphragm, an artificial diffusivity is required to accurately capture the contact surface. Finally, the method is applied to a shock wave propagating into a medium with non-uniform density/entropy and to a CJ detonation wave. Multi-dimensional formulation of the model is presented and is illustrated by a 2D oblique wave reflection from an inviscid wall, by a 2D supersonic blunt body flow and by a Mach reflection problem.

Focusing on Contact Lens Safety

MedlinePlus

... lenses to FDA’s MedWatch reporting program . How to Report Problems Here’s how you can help: If you ... selling contact lenses over the Web, you should report it to the FDA . If you don’t ...

Development of high temperature stable Ohmic and Schottky contacts on n-gallium nitride

NASA Astrophysics Data System (ADS)

Khanna, Rohit

In this work the effort was made to towards develop and investigate high temperature stable Ohmic and Schottky contacts for n type GaN. Various borides and refractory materials were incorporated in metallization scheme to best attain the desired effect of minimal degradation of contacts when placed at high temperatures. This work focuses on achieving a contact scheme using different borides which include two Tungsten Borides (namely W2B, W2B 5), Titanium Boride (TiB2), Chromium Boride (CrB2) and Zirconium Boride (ZrB2). Further a high temperature metal namely Iridium (Ir) was evaluated as a potential contact to n-GaN, as part of continuing improved device technology development. The main goal of this project was to investigate the most promising boride-based contact metallurgies on GaN, and finally to fabricate a High Electron Mobility Transistor (HEMT) and compare its reliability to a HEMT using present technology contact. Ohmic contacts were fabricated on n GaN using borides in the metallization scheme of Ti/Al/boride/Ti/Au. The characterization of the contacts was done using current-voltage measurements, scanning electron microscopy (SEM) and Auger Electron Spectroscopy (AES) measurements. The contacts formed gave specific contact resistance of the order of 10-5 to 10-6 Ohm-cm2. A minimum contact resistance of 1.5x10-6 O.cm 2 was achieved for the TiB2 based scheme at an annealing temperature of 850-900°C, which was comparable to a regular ohmic contact of Ti/Al/Ni/Au on n GaN. When some of borides contacts were placed on a hot plate or in hot oven for temperature ranging from 200°C to 350°C, the regular metallization contacts degraded before than borides ones. Even with a certain amount of intermixing of the metallization scheme the boride contacts showed minimal roughening and smoother morphology, which, in terms of edge acuity, is crucial for very small gate devices. Schottky contacts were also fabricated and characterized using all the five boride compounds. The barrier height obtained on n GaN was ˜0-5-0.6 eV which was low compared to those obtained by Pt or Ni. This barrier height is too low for use as a gate contact and they can only have limited use, perhaps, in gas sensors where large leakage current can be tolerated in exchange for better thermal reliability. AlGaN/GaN High Electron Mobility Transistors (HEMTs) were fabricated with Ti/Al/TiB2/Ti/Au source/drain ohmic contacts and a variety of gate metal schemes (Pt/Au, Ni/Au, Pt/TiB2/Au or Ni/TiB 2/Au) and were subjected to long-term annealing at 350°C. By comparison with companion devices with conventional Ti/Al/Pt/Au ohmic contacts and Pt/Au gate contacts, the HEMTs with boride-based ohmic metal and either Pt/Au, Ni/Au or Ni/TiB2/Au gate metal showed superior stability of both source-drain current and transconductance after 25 days aging at 350°C. The need for sputter deposition of the borides causes' problem in achieving significantly lower specific contact resistance than with conventional schemes deposited using e-beam evaporation. The borides also seem to be, in general, good getters for oxygen leading to sheet resistivity issues. Ir/Au Schottky contacts and Ti/Al/Ir/Au ohmic contacts on n-type GaN were investigated as a function of annealing temperature and compared to their more common Ni-based counterparts. The Ir/Au ohmic contacts on n-type GaN with n˜1017 cm-3 exhibited barrier heights of 0.55 eV after annealing at 700°C and displayed less intermixing of the contact metals compared to Ni/Au. A minimum specific contact resistance of 1.6 x 10-6 O.cm2 was obtained for the ohmic contacts on n-type GaN with n˜1018 cm-3 after annealing at 900°C. The measurement temperature dependence of contact resistance was similar for both Ti/Al/Ir/Au and Ti/Al/Ni/Au, suggesting the same transport mechanism was present in both types of contacts. The Ir-based ohmic contacts displayed superior thermal aging characteristics at 350°C. Auger Electron Spectroscopy showed that Ir is a superior diffusion barrier at these moderate temperatures than Ni.

Schottky-barrier-free contacts with two-dimensional semiconductors by surface-engineered MXenes

DOE PAGES

Liu, Yuanyue; Xiao, Hai; Goddard, III, William A.

2016-11-22

Two-dimensional (2D) metal carbides and nitrides, called MXenes, have attracted great interest for applications such as energy storage. Here we demonstrate their potential as Schottky-barrier-free metal contacts to 2D semiconductors, providing a solution to the contact-resistance problem in 2D electronics. Based on first principles calculations, we find that the surface chemistry strongly affects the Fermi level of MXenes: O termination always increases the work function with respect to that of bare surface, OH always decreases it, while F exhibits either trend depending on the specific material. This phenomenon originates from the effect of surface dipoles, which together with the weakmore » Fermi level pinning, enable Schottky-barrier-free hole (or electron) injection into 2D semiconductors through van der Waals junctions with some of the O-terminated (or all the OH-terminated) MXenes. Furthermore, we suggest synthetic routes to control the surface terminations based on the calculated formation energies. Finally, this study enhances the understanding of the correlation between surface chemistry and electronic/transport properties of 2D materials, and also gives practical predictions for improving 2D electronics.« less

Optimal Control of Thermo--Fluid Phenomena in Variable Domains

NASA Astrophysics Data System (ADS)

Volkov, Oleg; Protas, Bartosz

2008-11-01

This presentation concerns our continued research on adjoint--based optimization of viscous incompressible flows (the Navier--Stokes problem) coupled with heat conduction involving change of phase (the Stefan problem), and occurring in domains with variable boundaries. This problem is motivated by optimization of advanced welding techniques used in automotive manufacturing, where the goal is to determine an optimal heat input, so as to obtain a desired shape of the weld pool surface upon solidification. We argue that computation of sensitivities (gradients) in such free--boundary problems requires the use of the shape--differential calculus as a key ingredient. We also show that, with such tools available, the computational solution of the direct and inverse (optimization) problems can in fact be achieved in a similar manner and in a comparable computational time. Our presentation will address certain mathematical and computational aspects of the method. As an illustration we will consider the two--phase Stefan problem with contact point singularities where our approach allows us to obtain a thermodynamically consistent solution.

An MPI + $X$ implementation of contact global search using Kokkos

DOE PAGES

Hansen, Glen A.; Xavier, Patrick G.; Mish, Sam P.; ...

2015-10-05

This paper describes an approach that seeks to parallelize the spatial search associated with computational contact mechanics. In contact mechanics, the purpose of the spatial search is to find “nearest neighbors,” which is the prelude to an imprinting search that resolves the interactions between the external surfaces of contacting bodies. In particular, we are interested in the contact global search portion of the spatial search associated with this operation on domain-decomposition-based meshes. Specifically, we describe an implementation that combines standard domain-decomposition-based MPI-parallel spatial search with thread-level parallelism (MPI-X) available on advanced computer architectures (those with GPU coprocessors). Our goal ismore » to demonstrate the efficacy of the MPI-X paradigm in the overall contact search. Standard MPI-parallel implementations typically use a domain decomposition of the external surfaces of bodies within the domain in an attempt to efficiently distribute computational work. This decomposition may or may not be the same as the volume decomposition associated with the host physics. The parallel contact global search phase is then employed to find and distribute surface entities (nodes and faces) that are needed to compute contact constraints between entities owned by different MPI ranks without further inter-rank communication. Key steps of the contact global search include computing bounding boxes, building surface entity (node and face) search trees and finding and distributing entities required to complete on-rank (local) spatial searches. To enable source-code portability and performance across a variety of different computer architectures, we implemented the algorithm using the Kokkos hardware abstraction library. While we targeted development towards machines with a GPU accelerator per MPI rank, we also report performance results for OpenMP with a conventional multi-core compute node per rank. Results here demonstrate a 47 % decrease in the time spent within the global search algorithm, comparing the reference ACME algorithm with the GPU implementation, on an 18M face problem using four MPI ranks. As a result, while further work remains to maximize performance on the GPU, this result illustrates the potential of the proposed implementation.« less

A linear complementarity method for the solution of vertical vehicle-track interaction

NASA Astrophysics Data System (ADS)

Zhang, Jian; Gao, Qiang; Wu, Feng; Zhong, Wan-Xie

2018-02-01

A new method is proposed for the solution of the vertical vehicle-track interaction including a separation between wheel and rail. The vehicle is modelled as a multi-body system using rigid bodies, and the track is treated as a three-layer beam model in which the rail is considered as an Euler-Bernoulli beam and both the sleepers and the ballast are represented by lumped masses. A linear complementarity formulation is directly established using a combination of the wheel-rail normal contact condition and the generalised-α method. This linear complementarity problem is solved using the Lemke algorithm, and the wheel-rail contact force can be obtained. Then the dynamic responses of the vehicle and the track are solved without iteration based on the generalised-α method. The same equations of motion for the vehicle and track are adopted at the different wheel-rail contact situations. This method can remove some restrictions, that is, time-dependent mass, damping and stiffness matrices of the coupled system, multiple equations of motion for the different contact situations and the effect of the contact stiffness. Numerical results demonstrate that the proposed method is effective for simulating the vehicle-track interaction including a separation between wheel and rail.

Factors associated with reported service use for mental health problems by residents of rural and remote communities: cross-sectional findings from a baseline survey

PubMed Central

2013-01-01

Background The patterns of health service use by rural and remote residents are poorly understood and under-represented in national surveys. This paper examines professional and non-professional service use for mental health problems in rural and remote communities in Australia. Methods A stratified random sample of adults was drawn from non-metropolitan regions of New South Wales, Australia as part of a longitudinal population-based cohort. One-quarter (27.7%) of the respondents were from remote or very remote regions. The socio-demographic, health status and service utilization (professional and non-professional) characteristics of 2150 community dwelling residents are described. Hierarchical logistic regressions were used to identify cross-sectional associations between socio-demographic, health status and professional and non-professional health service utilization variables. Results The overall rate of professional contacts for mental health problems during the previous 12 months (17%) in this rural population exceeded the national rate (11.9%). Rates for psychologists and psychiatrists were similar but rates for GPs were higher (12% vs. 8.1%). Non-professional contact rates were 12%. Higher levels of help seeking were associated with the absence of a partner, poorer finances, severity of mental health problems, and higher levels of adversity. Remoteness was associated with lower utilization of non-professional support. A Provisional Service Need Index was devised, and it demonstrated a broad dose–response relationship between severity of mental health problems and the likelihood of seeking any professional or non-professional help. Nevertheless, 47% of those with estimated high service need had no contact with professional services. Conclusions An examination of self-reported patterns of professional and non-professional service use for mental health problems in a rural community cohort revealed relatively higher rates of general practitioner attendance for such problems compared with data from metropolitan centres. Using a measure of Provisional Service Need those with greater needs were more likely to access specialist services, even in remote regions, although a substantial proportion of those with the highest service need sought no professional help. Geographic and financial barriers to service use were identified and perception of service adequacy was relatively low, especially among those with the highest levels of distress and greatest adversity. PMID:23631501

Factors associated with reported service use for mental health problems by residents of rural and remote communities: cross-sectional findings from a baseline survey.

PubMed

Perkins, David; Fuller, Jeffrey; Kelly, Brian J; Lewin, Terry J; Fitzgerald, Michael; Coleman, Clare; Inder, Kerry J; Allan, John; Arya, Dinesh; Roberts, Russell; Buss, Richard

2013-04-30

The patterns of health service use by rural and remote residents are poorly understood and under-represented in national surveys. This paper examines professional and non-professional service use for mental health problems in rural and remote communities in Australia. A stratified random sample of adults was drawn from non-metropolitan regions of New South Wales, Australia as part of a longitudinal population-based cohort. One-quarter (27.7%) of the respondents were from remote or very remote regions. The socio-demographic, health status and service utilization (professional and non-professional) characteristics of 2150 community dwelling residents are described. Hierarchical logistic regressions were used to identify cross-sectional associations between socio-demographic, health status and professional and non-professional health service utilization variables. The overall rate of professional contacts for mental health problems during the previous 12 months (17%) in this rural population exceeded the national rate (11.9%). Rates for psychologists and psychiatrists were similar but rates for GPs were higher (12% vs. 8.1%). Non-professional contact rates were 12%. Higher levels of help seeking were associated with the absence of a partner, poorer finances, severity of mental health problems, and higher levels of adversity. Remoteness was associated with lower utilization of non-professional support. A Provisional Service Need Index was devised, and it demonstrated a broad dose-response relationship between severity of mental health problems and the likelihood of seeking any professional or non-professional help. Nevertheless, 47% of those with estimated high service need had no contact with professional services. An examination of self-reported patterns of professional and non-professional service use for mental health problems in a rural community cohort revealed relatively higher rates of general practitioner attendance for such problems compared with data from metropolitan centres. Using a measure of Provisional Service Need those with greater needs were more likely to access specialist services, even in remote regions, although a substantial proportion of those with the highest service need sought no professional help. Geographic and financial barriers to service use were identified and perception of service adequacy was relatively low, especially among those with the highest levels of distress and greatest adversity.

The provision of out-of-hours care and associated costs in an urban area of Switzerland: a cost description study

PubMed Central

2010-01-01

Background In Switzerland, General Practitioners (GPs) play an important role for out-of-hours emergency care as one service option beside freely accessible and costly emergency departments of hospitals. The aim of this study was to evaluate the services provided and the economic consequences of a Swiss GP out-of-hours service. Methods GPs participating in the out-of-hours service in the city of Zurich collected data on medical problems (ICPC coding), mode of contact, mode of resource use and services provided (time units; diagnostics; treatments). From a health care insurance perspective, we assessed the association between total costs and its two components (basic costs: charges for time units and emergency surcharge; individual costs: charges for clinical examination, diagnostics and treatment in the discretion of the GP). Results 125 GPs collected data on 685 patient contacts. The most prevalent health problems were of respiratory (24%), musculoskeletal (13%) and digestive origin (12%). Home visits (61%) were the most common contact mode, followed by practice (25%) and telephone contacts (14%). 82% of patients could be treated by ambulatory care. In 20% of patients additional technical diagnostics, most often laboratory tests, were used. The mean total costs for one emergency patient contact were €144 (95%-CI: 137-151). The mode of contact was an important determinant of total costs (mean total costs for home visits: €176 [95%-CI: 168-184]; practice contact: €90 [95%-CI: 84-98]; telephone contact: €48 [95%-CI: 40-55]). Basic costs contributed 83% of total costs for home visits and 70% of total costs for practice contacts. Individual mean costs were similarly low for home visits (€30) and practice contacts (€27). Medical problems had no relevant influence on this cost pattern. Conclusions GPs managed most emergency demand in their out-of-hours service by ambulatory care. They applied little diagnostic testing and basic care. Our findings are of relevance for policy makers even from other countries with different pricing policies. Policy makers should be interested in a reimbursement system promoting out-of-hours care run by GPs as one valuable service option. PMID:21171989

Investigation of the Stability of a Two-Span Bridge with the use of a High-Precision Laser Displacement Sensors

NASA Astrophysics Data System (ADS)

Poddaeva, O.; Churin, P.; Fedosova, A.; Truhanov, S.

2018-03-01

Studies of aerodynamics of bridge structures are an actual problem. Such attention is paid to the study of wind influence on bridge structures not at all by chance; a large number of cases of loss of stability of such structures are known under the influence of wind up to their complete destruction. The development of non-contact systems of measuring equipment allows solving this problem with a high level of accuracy and reliability. This article presents the results of experimental studies of wind impact on a two-span bridge using specialized measuring system based on high-precision laser displacement sensors.

On inconsistency in frictional granular systems

NASA Astrophysics Data System (ADS)

Alart, Pierre; Renouf, Mathieu

2018-04-01

Numerical simulation of granular systems is often based on a discrete element method. The nonsmooth contact dynamics approach can be used to solve a broad range of granular problems, especially involving rigid bodies. However, difficulties could be encountered and hamper successful completion of some simulations. The slow convergence of the nonsmooth solver may sometimes be attributed to an ill-conditioned system, but the convergence may also fail. The prime aim of the present study was to identify situations that hamper the consistency of the mathematical problem to solve. Some simple granular systems were investigated in detail while reviewing and applying the related theoretical results. A practical alternative is briefly analyzed and tested.

The European experience.

PubMed

Bisgaard, N

2001-06-01

This article presents an overview of past and current experiences with time division multiple assess-based (Global System for Mobil Communication) mobile telephones in Europe as seen by the European Hearing Instrument Manufacturers Association. Initial fear of widespread interference problems for hearing aid users in general owing to use of a new generation of mobile telephones seems unjustified. The background for the International Electrotechnical Commission 118-13 standard for measuring interference is described. No solution to complete elimination of interference problems resulting from direct contact between hearing aids and mobile telephones has yet been found. Several reports on the subjects are cited, and new work on measurement standards for near-field situations is mentioned.

Biofeedback & Bowel Disorders: Teaching Yourself to Live without the Problem

MedlinePlus

... Personal Stories Contact Us Search Biofeedback & Bowel Disorders: Teaching Yourself to Live Without the Problem Home Biofeedback ... donation. Adapted from IFFGD Publication: Biofeedback & Bowel Disorders: Teaching Yourself to Live without the Problem by Mary ...

Contact Versus Non-Contact Measurement of a Helicopter Main Rotor Composite Blade

DOE Office of Scientific and Technical Information (OSTI.GOV)

Luczak, Marcin; Dziedziech, Kajetan; Peeters, Bart

2010-05-28

The dynamic characterization of lightweight structures is particularly complex as the impact of the weight of sensors and instrumentation (cables, mounting of exciters...) can distort the results. Varying mass loading or constraint effects between partial measurements may determine several errors on the final conclusions. Frequency shifts can lead to erroneous interpretations of the dynamics parameters. Typically these errors remain limited to a few percent. Inconsistent data sets however can result in major processing errors, with all related consequences towards applications based on the consistency assumption, such as global modal parameter identification, model-based damage detection and FRF-based matrix inversion in substructuring,more » load identification and transfer path analysis [1]. This paper addresses the subject of accuracy in the context of the measurement of the dynamic properties of a particular lightweight structure. It presents a comprehensive comparative study between the use of accelerometer, laser vibrometer (scanning LDV) and PU-probe (acoustic particle velocity and pressure) measurements to measure the structural responses, with as final aim the comparison of modal model quality assessment. The object of the investigation is a composite material blade from the main rotor of a helicopter. The presented results are part of an extensive test campaign performed with application of SIMO, MIMO, random and harmonic excitation, and the use of the mentioned contact and non-contact measurement techniques. The advantages and disadvantages of the applied instrumentation are discussed. Presented are real-life measurement problems related to the different set up conditions. Finally an analysis of estimated models is made in view of assessing the applicability of the various measurement approaches for successful fault detection based on modal parameters observation as well as in uncertain non-deterministic numerical model updating.« less

Contact Versus Non-Contact Measurement of a Helicopter Main Rotor Composite Blade

NASA Astrophysics Data System (ADS)

Luczak, Marcin; Dziedziech, Kajetan; Vivolo, Marianna; Desmet, Wim; Peeters, Bart; Van der Auweraer, Herman

2010-05-01

The dynamic characterization of lightweight structures is particularly complex as the impact of the weight of sensors and instrumentation (cables, mounting of exciters…) can distort the results. Varying mass loading or constraint effects between partial measurements may determine several errors on the final conclusions. Frequency shifts can lead to erroneous interpretations of the dynamics parameters. Typically these errors remain limited to a few percent. Inconsistent data sets however can result in major processing errors, with all related consequences towards applications based on the consistency assumption, such as global modal parameter identification, model-based damage detection and FRF-based matrix inversion in substructuring, load identification and transfer path analysis [1]. This paper addresses the subject of accuracy in the context of the measurement of the dynamic properties of a particular lightweight structure. It presents a comprehensive comparative study between the use of accelerometer, laser vibrometer (scanning LDV) and PU-probe (acoustic particle velocity and pressure) measurements to measure the structural responses, with as final aim the comparison of modal model quality assessment. The object of the investigation is a composite material blade from the main rotor of a helicopter. The presented results are part of an extensive test campaign performed with application of SIMO, MIMO, random and harmonic excitation, and the use of the mentioned contact and non-contact measurement techniques. The advantages and disadvantages of the applied instrumentation are discussed. Presented are real-life measurement problems related to the different set up conditions. Finally an analysis of estimated models is made in view of assessing the applicability of the various measurement approaches for successful fault detection based on modal parameters observation as well as in uncertain non-deterministic numerical model updating.

A non-Hertzian method for solving wheel-rail normal contact problem taking into account the effect of yaw

NASA Astrophysics Data System (ADS)

Liu, Binbin; Bruni, Stefano; Vollebregt, Edwin

2016-09-01

A novel approach is proposed in this paper to deal with non-Hertzian normal contact in wheel-rail interface, extending the widely used Kik-Piotrowski method. The new approach is able to consider the effect of the yaw angle of the wheelset against the rail on the shape of the contact patch and on pressure distribution. Furthermore, the method considers the variation of profile curvature across the contact patch, enhancing the correspondence to CONTACT for highly non-Hertzian contact conditions. The simulation results show that the proposed method can provide more accurate estimation than the original algorithm compared to Kalker's CONTACT, and that the influence of yaw on the contact results is significant under certain circumstances.

Lithological and Surface Geometry Joint Inversions Using Multi-Objective Global Optimization Methods

NASA Astrophysics Data System (ADS)

Lelièvre, Peter; Bijani, Rodrigo; Farquharson, Colin

2016-04-01

Geologists' interpretations about the Earth typically involve distinct rock units with contacts (interfaces) between them. In contrast, standard minimum-structure geophysical inversions are performed on meshes of space-filling cells (typically prisms or tetrahedra) and recover smoothly varying physical property distributions that are inconsistent with typical geological interpretations. There are several approaches through which mesh-based minimum-structure geophysical inversion can help recover models with some of the desired characteristics. However, a more effective strategy may be to consider two fundamentally different types of inversions: lithological and surface geometry inversions. A major advantage of these two inversion approaches is that joint inversion of multiple types of geophysical data is greatly simplified. In a lithological inversion, the subsurface is discretized into a mesh and each cell contains a particular rock type. A lithological model must be translated to a physical property model before geophysical data simulation. Each lithology may map to discrete property values or there may be some a priori probability density function associated with the mapping. Through this mapping, lithological inverse problems limit the parameter domain and consequently reduce the non-uniqueness from that presented by standard mesh-based inversions that allow physical property values on continuous ranges. Furthermore, joint inversion is greatly simplified because no additional mathematical coupling measure is required in the objective function to link multiple physical property models. In a surface geometry inversion, the model comprises wireframe surfaces representing contacts between rock units. This parameterization is then fully consistent with Earth models built by geologists, which in 3D typically comprise wireframe contact surfaces of tessellated triangles. As for the lithological case, the physical properties of the units lying between the contact surfaces are set to a priori values. The inversion is tasked with calculating the geometry of the contact surfaces instead of some piecewise distribution of properties in a mesh. Again, no coupling measure is required and joint inversion is simplified. Both of these inverse problems involve high nonlinearity and discontinuous or non-obtainable derivatives. They can also involve the existence of multiple minima. Hence, one can not apply the standard descent-based local minimization methods used to solve typical minimum-structure inversions. Instead, we are applying Pareto multi-objective global optimization (PMOGO) methods, which generate a suite of solutions that minimize multiple objectives (e.g. data misfits and regularization terms) in a Pareto-optimal sense. Providing a suite of models, as opposed to a single model that minimizes a weighted sum of objectives, allows a more complete assessment of the possibilities and avoids the often difficult choice of how to weight each objective. While there are definite advantages to PMOGO joint inversion approaches, the methods come with significantly increased computational requirements. We are researching various strategies to ameliorate these computational issues including parallelization and problem dimension reduction.

LCP method for a planar passive dynamic walker based on an event-driven scheme

NASA Astrophysics Data System (ADS)

Zheng, Xu-Dong; Wang, Qi

2018-06-01

The main purpose of this paper is to present a linear complementarity problem (LCP) method for a planar passive dynamic walker with round feet based on an event-driven scheme. The passive dynamic walker is treated as a planar multi-rigid-body system. The dynamic equations of the passive dynamic walker are obtained by using Lagrange's equations of the second kind. The normal forces and frictional forces acting on the feet of the passive walker are described based on a modified Hertz contact model and Coulomb's law of dry friction. The state transition problem of stick-slip between feet and floor is formulated as an LCP, which is solved with an event-driven scheme. Finally, to validate the methodology, four gaits of the walker are simulated: the stance leg neither slips nor bounces; the stance leg slips without bouncing; the stance leg bounces without slipping; the walker stands after walking several steps.

LCP method for a planar passive dynamic walker based on an event-driven scheme

NASA Astrophysics Data System (ADS)

Zheng, Xu-Dong; Wang, Qi

2018-02-01

The main purpose of this paper is to present a linear complementarity problem (LCP) method for a planar passive dynamic walker with round feet based on an event-driven scheme. The passive dynamic walker is treated as a planar multi-rigid-body system. The dynamic equations of the passive dynamic walker are obtained by using Lagrange's equations of the second kind. The normal forces and frictional forces acting on the feet of the passive walker are described based on a modified Hertz contact model and Coulomb's law of dry friction. The state transition problem of stick-slip between feet and floor is formulated as an LCP, which is solved with an event-driven scheme. Finally, to validate the methodology, four gaits of the walker are simulated: the stance leg neither slips nor bounces; the stance leg slips without bouncing; the stance leg bounces without slipping; the walker stands after walking several steps.

Effects of mother-infant skin-to-skin contact on severe latch-on problems in older infants: a randomized trial.

PubMed

Svensson, Kristin E; Velandia, Marianne I; Matthiesen, Ann-Sofi T; Welles-Nyström, Barbara L; Widström, Ann-Marie E

2013-03-11

Infants with latch-on problems cause stress for parents and staff, often resulting in early termination of breastfeeding. Healthy newborns experiencing skin-to-skin contact at birth are pre-programmed to find the mother's breast. This study investigates if skin-to-skin contact between mothers with older infants having severe latching on problems would resolve the problem. Mother-infant pairs with severe latch-on problems, that were not resolved during screening procedures at two maternity hospitals in Stockholm 1998-2004, were randomly assigned to skin-to-skin contact (experimental group) or not (control group) during breastfeeding. Breastfeeding counseling was given to both groups according to a standard model. Participants were unaware of their treatment group. Objectives were to compare treatment groups concerning the proportion of infants regularly latching on, the time from intervention to regular latching on and maternal emotions and pain before and during breastfeeding. On hundred and three mother-infant pairs with severe latch-on problems 1-16 weeks postpartum were randomly assigned and analyzed. There was no significant difference between the groups in the proportion of infants starting regular latching-on (75% experimental group, vs. 86% control group). Experimental group infants, who latched on, had a significantly shorter median time from start of intervention to regular latching on than control infants, 2.0 weeks (Q1 = 1.0, Q3 = 3.7) vs. 4.7 weeks (Q1 = 2.0, Q3 = 8.0), (p-value = 0.020). However, more infants in the experimental group (94%), with a history of "strong reaction" during "hands-on latch intervention", latched-on within 3 weeks compared to 33% in the control infants (Fisher Exact test p-value = 0.0001). Mothers in the experimental group (n = 53) had a more positive breastfeeding experience according to the Breastfeeding Emotional Scale during the intervention than mothers in the control group (n = 50) (p-value = 0.022). Skin-to-skin contact during breastfeeding seems to immediately enhance maternal positive feelings and shorten the time it takes to resolve severe latch-on problems in the infants who started to latch. An underlying mechanism may be that skin-to-skin contact with the mother during breastfeeding may calm infants with earlier strong reaction to "hands on latch intervention" and relieve the stress which may have blocked the infant's inborn biological program to find the breast and latch on. Karolinska Clinical Trial Registration number CT20100055.

A numerical analysis of contact and limit-point behavior in a class of problems of finite elastic deformation

NASA Technical Reports Server (NTRS)

Endo, T.; Oden, J. T.; Becker, E. B.; Miller, T.

1984-01-01

Finite element methods for the analysis of bifurcations, limit-point behavior, and unilateral frictionless contact of elastic bodies undergoing finite deformation are presented. Particular attention is given to the development and application of Riks-type algorithms for the analysis of limit points and exterior penalty methods for handling the unilateral constraints. Applications focus on the problem of finite axisymmetric deformations, snap-through, and inflation of thick rubber spherical shells.

Improvement of Energy Efficiency and Environmental Safety of Thermal Energy Through the Implementation of Contact Energy Exchange Processes

NASA Astrophysics Data System (ADS)

Varlamov, Gennadii Borysovich; Romanova, Kateryna Alexandrovna; Nazarova, Iryna; Daschenko, Olga; Kapustiansky, Andry

2017-12-01

Energy efficiency improvement and ecological safety of heat power plants are urgent problems, which require scientifically grounded approaches and solutions. These problems can be solved partly within the presented heat-and-power cycles by including contact energy exchange equipment in the circuits of existing installations. A significant positive effect is obtained in the contact energy exchange installations, such as gas-steam installation `Aquarius' and the contact hydrogen heat generator that also can use hydrogen as a fuel. In these plants, the efficiency increases approximately by 10-12% in comparison with traditional installations, and the concentration of toxic substances, such as nitrogen oxides and carbon monoxide in flue gas can be reduced to 30 mg/m3 and to 5 mg/m3, respectively. Moreover, the plants additionally `generate' the clean water, which can be used for technical purposes.

Self-perceived Coparenting of Nonresident Fathers: Scale Development and Validation.

PubMed

Dyer, W Justin; Fagan, Jay; Kaufman, Rebecca; Pearson, Jessica; Cabrera, Natasha

2017-11-16

This study reports on the development and validation of the Fatherhood Research and Practice Network coparenting perceptions scale for nonresident fathers. Although other measures of coparenting have been developed, this is the first measure developed specifically for low-income, nonresident fathers. Focus groups were conducted to determine various aspects of coparenting. Based on this, a scale was created and administered to 542 nonresident fathers. Participants also responded to items used to examine convergent and predictive validity (i.e., parental responsibility, contact with the mother, father self-efficacy and satisfaction, child behavior problems, and contact and engagement with the child). Factor analyses and reliability tests revealed three distinct and reliable perceived coparenting factors: undermining, alliance, and gatekeeping. Validity tests suggest substantial overlap between the undermining and alliance factors, though undermining was uniquely related to child behavior problems. The alliance and gatekeeping factors showed strong convergent validity and evidence for predictive validity. Taken together, results suggest this relatively short measure (11 items) taps into three coparenting dimensions significantly predictive of aspects of individual and family life. © 2017 Family Process Institute.

Analysis of free modeling predictions by RBO aleph in CASP11.

PubMed

Mabrouk, Mahmoud; Werner, Tim; Schneider, Michael; Putz, Ines; Brock, Oliver

2016-09-01

The CASP experiment is a biannual benchmark for assessing protein structure prediction methods. In CASP11, RBO Aleph ranked as one of the top-performing automated servers in the free modeling category. This category consists of targets for which structural templates are not easily retrievable. We analyze the performance of RBO Aleph and show that its success in CASP was a result of its ab initio structure prediction protocol. A detailed analysis of this protocol demonstrates that two components unique to our method greatly contributed to prediction quality: residue-residue contact prediction by EPC-map and contact-guided conformational space search by model-based search (MBS). Interestingly, our analysis also points to a possible fundamental problem in evaluating the performance of protein structure prediction methods: Improvements in components of the method do not necessarily lead to improvements of the entire method. This points to the fact that these components interact in ways that are poorly understood. This problem, if indeed true, represents a significant obstacle to community-wide progress. Proteins 2016; 84(Suppl 1):87-104. © 2015 Wiley Periodicals, Inc. © 2015 Wiley Periodicals, Inc.

Unhealthy drinking in the Belgian elderly population: prevalence and associated characteristics.

PubMed

Hoeck, Sarah; Van Hal, Guido

2013-12-01

Knowledge about alcohol consumption patterns and alcohol problems among the Belgian elderly population is scarce. The aims of this study were to explore alcohol consumption patterns and alcohol problems among the Belgian elderly population aged ≥ 65 years living at home, and to determine their association with socio-demographic characteristics, health status and socio-economic status. In this cross-sectional study based on a representative sample of 4825 non-institutionalized Belgian elderly people (≥ 65 years) in the Belgian Health Interview Surveys 2001 and 2004, alcohol consumption patterns and alcohol problems were estimated according to age, gender, survey year, living situation, frequency of social contacts, smoking status, and socio-economic status. In all, 50.4% of the sample were non- or occasional drinkers, 29.1% were moderate drinkers, 10.4% at-risk drinkers, 4.6% heavy drinkers and 5.5% problematic drinkers. In total, 20.5% of the Belgian elderly population drank in excess of the National Institute on Alcohol Abuse and Alcoholism guidelines, and 4.7% had an alcohol problem according to the CAGE. In addition, 81.3% of the elderly people who consume alcohol used prescribed medications in the past 2 weeks. After adjustment for risk factors we found that, compared with moderate drinking, unhealthy drinking was significantly associated with age, gender, frequency of social contacts, health status and socio-economic status. Belgian health policy should be aware of the high level of at-risk drinkers in the elderly population and the underdetection and misdiagnosis of alcohol problems in this age group. An increased attention in public health initiatives among the Belgian elderly population is needed.

Discrimination and support from friends and family members experienced by people with mental health problems: findings from an Australian national survey.

PubMed

Morgan, Amy J; Reavley, N J; Jorm, A F; Beatson, R

2017-11-01

To investigate the scope and nature of discrimination and positive treatment experienced by adults with mental health problems from their friends and family in a population-based survey. An Australian telephone-survey of 5220 adults included 1381 individuals who reported a mental health problem or scored high on a screening questionnaire. Respondents were interviewed about their experience of discrimination and positive treatment from their friends, spouse and other family members. Descriptions of experiences were content-analysed to identify key characteristics. Mental health diagnoses were primarily depression or anxiety disorders, and just over half had received treatment in the last 12 months. Positive treatment from family and friends was far more common than discrimination, reported by 74.1% of respondents. This was primarily characterised by providing emotional support and maintaining contact, as well as checking on their mental health and being a good listener. Nevertheless, discriminatory behaviours from friends and family were reported by 25.8% of respondents, with reducing or cutting contact being by far the most common. Friends and family also commonly dismissed that mental illness was real or caused suffering and showed a lack of understanding about mental health problems or treatments and how they can impact behaviour and functioning. This nationally representative study of real life experiences highlights the potential for harm or benefit from a person's social support network. Despite positive experiences being common, there is an ongoing need to reduce mental illness stigma and improve understanding of how to support a loved one with a mental health problem.

Caustic ulcers caused by cement aqua: report of a case.

PubMed

Machovcova, Alena

2010-01-01

Chromium is widely used in various industries including construction sector. Skin contact with cement has been associated with allergic or irritant contact dermatitis. Contact dermatitis is one of the most frequently reported health problems among construction workers. Irritant contact dermatitis from cement ranges from cement burns to cumulative irritant contact dermatitis. Cement burns are rarely reported and are considered a severe form of acute irritant contact dermatitis. They are associated with amateur user working in a short ready-mix time-frame with poor protective measures. They usually result in significant morbidity and initially are associated with minimal discomfort. We report a typical case.

Contact sensing from force measurements

NASA Technical Reports Server (NTRS)

Bicchi, Antonio; Salisbury, J. K.; Brock, David L.

1993-01-01

This article addresses contact sensing (i.e., the problem of resolving the location of a contact, the force at the interface, and the moment about the contact normals). Called 'intrinsic' contact sensing for the use of internal force and torque measurements, this method allows for practical devices that provide simple, relevant contact information in practical robotic applications. Such sensors have been used in conjunction with robot hands to identify objects, determine surface friction, detect slip, augment grasp stability, measure object mass, probe surfaces, and control collision and for a variety of other useful tasks. This article describes the theoretical basis for their operation and provides a framework for future device design.

Incorporating contact angles in the surface tension force with the ACES interface curvature scheme

NASA Astrophysics Data System (ADS)

Owkes, Mark

2017-11-01

In simulations of gas-liquid flows interacting with solid boundaries, the contact line dynamics effect the interface motion and flow field through the surface tension force. The surface tension force is directly proportional to the interface curvature and the problem of accurately imposing a contact angle must be incorporated into the interface curvature calculation. Many commonly used algorithms to compute interface curvatures (e.g., height function method) require extrapolating the interface, with defined contact angle, into the solid to allow for the calculation of a curvature near a wall. Extrapolating can be an ill-posed problem, especially in three-dimensions or when multiple contact lines are near each other. We have developed an accurate methodology to compute interface curvatures that allows for contact angles to be easily incorporated while avoiding extrapolation and the associated challenges. The method, known as Adjustable Curvature Evaluation Scale (ACES), leverages a least squares fit of a polynomial to points computed on the volume-of-fluid (VOF) representation of the gas-liquid interface. The method is tested by simulating canonical test cases and then applied to simulate the injection and motion of water droplets in a channel (relevant to PEM fuel cells).

Heat transfer to two-phase air/water mixtures flowing in small tubes with inlet disequilibrium

NASA Technical Reports Server (NTRS)

Janssen, J. M.; Florschuetz, L. W.; Fiszdon, J. P.

1986-01-01

The cooling of gas turbine components was the subject of considerable research. The problem is difficult because the available coolant, compressor bleed air, is itself quite hot and has relatively poor thermophysical properties for a coolant. Injecting liquid water to evaporatively cool the air prior to its contact with the hot components was proposed and studied, particularly as a method of cooling for contingency power applications. Injection of a small quantity of cold liquid water into a relatively hot coolant air stream such that evaporation of the liquid is still in process when the coolant contacts the hot component was studied. No approach was found whereby heat transfer characteristics could be confidently predicted for such a case based solely on prior studies. It was not clear whether disequilibrium between phases at the inlet to the hot component section would improve cooling relative to that obtained where equilibrium was established prior to contact with the hot surface.

Mesh-Based Entry Vehicle and Explosive Debris Re-Contact Probability Modeling

NASA Technical Reports Server (NTRS)

McPherson, Mark A.; Mendeck, Gavin F.

2011-01-01

The risk to a crewed vehicle arising from potential re-contact with fragments from an explosive breakup of any jettisoned spacecraft segments during entry has long sought to be quantified. However, great difficulty lies in efficiently capturing the potential locations of each fragment and their collective threat to the vehicle. The method presented in this paper addresses this problem by using a stochastic approach that discretizes simulated debris pieces into volumetric cells, and then assesses strike probabilities accordingly. Combining spatial debris density and relative velocity between the debris and the entry vehicle, the strike probability can be calculated from the integral of the debris flux inside each cell over time. Using this technique it is possible to assess the risk to an entry vehicle along an entire trajectory as it separates from the jettisoned segment. By decoupling the fragment trajectories from that of the entry vehicle, multiple potential separation maneuvers can then be evaluated rapidly to provide an assessment of the best strategy to mitigate the re-contact risk.

Accurate De Novo Prediction of Protein Contact Map by Ultra-Deep Learning Model.

PubMed

Wang, Sheng; Sun, Siqi; Li, Zhen; Zhang, Renyu; Xu, Jinbo

2017-01-01

Protein contacts contain key information for the understanding of protein structure and function and thus, contact prediction from sequence is an important problem. Recently exciting progress has been made on this problem, but the predicted contacts for proteins without many sequence homologs is still of low quality and not very useful for de novo structure prediction. This paper presents a new deep learning method that predicts contacts by integrating both evolutionary coupling (EC) and sequence conservation information through an ultra-deep neural network formed by two deep residual neural networks. The first residual network conducts a series of 1-dimensional convolutional transformation of sequential features; the second residual network conducts a series of 2-dimensional convolutional transformation of pairwise information including output of the first residual network, EC information and pairwise potential. By using very deep residual networks, we can accurately model contact occurrence patterns and complex sequence-structure relationship and thus, obtain higher-quality contact prediction regardless of how many sequence homologs are available for proteins in question. Our method greatly outperforms existing methods and leads to much more accurate contact-assisted folding. Tested on 105 CASP11 targets, 76 past CAMEO hard targets, and 398 membrane proteins, the average top L long-range prediction accuracy obtained by our method, one representative EC method CCMpred and the CASP11 winner MetaPSICOV is 0.47, 0.21 and 0.30, respectively; the average top L/10 long-range accuracy of our method, CCMpred and MetaPSICOV is 0.77, 0.47 and 0.59, respectively. Ab initio folding using our predicted contacts as restraints but without any force fields can yield correct folds (i.e., TMscore>0.6) for 203 of the 579 test proteins, while that using MetaPSICOV- and CCMpred-predicted contacts can do so for only 79 and 62 of them, respectively. Our contact-assisted models also have much better quality than template-based models especially for membrane proteins. The 3D models built from our contact prediction have TMscore>0.5 for 208 of the 398 membrane proteins, while those from homology modeling have TMscore>0.5 for only 10 of them. Further, even if trained mostly by soluble proteins, our deep learning method works very well on membrane proteins. In the recent blind CAMEO benchmark, our fully-automated web server implementing this method successfully folded 6 targets with a new fold and only 0.3L-2.3L effective sequence homologs, including one β protein of 182 residues, one α+β protein of 125 residues, one α protein of 140 residues, one α protein of 217 residues, one α/β of 260 residues and one α protein of 462 residues. Our method also achieved the highest F1 score on free-modeling targets in the latest CASP (Critical Assessment of Structure Prediction), although it was not fully implemented back then. http://raptorx.uchicago.edu/ContactMap/.

Accurate De Novo Prediction of Protein Contact Map by Ultra-Deep Learning Model

PubMed Central

Li, Zhen; Zhang, Renyu

2017-01-01

Motivation Protein contacts contain key information for the understanding of protein structure and function and thus, contact prediction from sequence is an important problem. Recently exciting progress has been made on this problem, but the predicted contacts for proteins without many sequence homologs is still of low quality and not very useful for de novo structure prediction. Method This paper presents a new deep learning method that predicts contacts by integrating both evolutionary coupling (EC) and sequence conservation information through an ultra-deep neural network formed by two deep residual neural networks. The first residual network conducts a series of 1-dimensional convolutional transformation of sequential features; the second residual network conducts a series of 2-dimensional convolutional transformation of pairwise information including output of the first residual network, EC information and pairwise potential. By using very deep residual networks, we can accurately model contact occurrence patterns and complex sequence-structure relationship and thus, obtain higher-quality contact prediction regardless of how many sequence homologs are available for proteins in question. Results Our method greatly outperforms existing methods and leads to much more accurate contact-assisted folding. Tested on 105 CASP11 targets, 76 past CAMEO hard targets, and 398 membrane proteins, the average top L long-range prediction accuracy obtained by our method, one representative EC method CCMpred and the CASP11 winner MetaPSICOV is 0.47, 0.21 and 0.30, respectively; the average top L/10 long-range accuracy of our method, CCMpred and MetaPSICOV is 0.77, 0.47 and 0.59, respectively. Ab initio folding using our predicted contacts as restraints but without any force fields can yield correct folds (i.e., TMscore>0.6) for 203 of the 579 test proteins, while that using MetaPSICOV- and CCMpred-predicted contacts can do so for only 79 and 62 of them, respectively. Our contact-assisted models also have much better quality than template-based models especially for membrane proteins. The 3D models built from our contact prediction have TMscore>0.5 for 208 of the 398 membrane proteins, while those from homology modeling have TMscore>0.5 for only 10 of them. Further, even if trained mostly by soluble proteins, our deep learning method works very well on membrane proteins. In the recent blind CAMEO benchmark, our fully-automated web server implementing this method successfully folded 6 targets with a new fold and only 0.3L-2.3L effective sequence homologs, including one β protein of 182 residues, one α+β protein of 125 residues, one α protein of 140 residues, one α protein of 217 residues, one α/β of 260 residues and one α protein of 462 residues. Our method also achieved the highest F1 score on free-modeling targets in the latest CASP (Critical Assessment of Structure Prediction), although it was not fully implemented back then. Availability http://raptorx.uchicago.edu/ContactMap/ PMID:28056090

Cavity method for force transmission in jammed disordered packings of hard particles.

PubMed

Bo, Lin; Mari, Romain; Song, Chaoming; Makse, Hernán A

2014-10-07

The force distribution of jammed disordered packings has always been considered a central object in the physics of granular materials. However, many of its features are poorly understood. In particular, analytic relations to other key macroscopic properties of jammed matter, such as the contact network and its coordination number, are still lacking. Here we develop a mean-field theory for this problem, based on the consideration of the contact network as a random graph where the force transmission becomes a constraint satisfaction problem. We can thus use the cavity method developed in the past few decades within the statistical physics of spin glasses and hard computer science problems. This method allows us to compute the force distribution P(f) for random packings of hard particles of any shape, with or without friction. We find a new signature of jamming in the small force behavior P(f) ∼ f(θ), whose exponent has attracted recent active interest: we find a finite value for P(f = 0), along with θ = 0. Furthermore, we relate the force distribution to a lower bound of the average coordination number z[combining macron](μ) of jammed packings of frictional spheres with coefficient μ. This bridges the gap between the two known isostatic limits z[combining macron]c (μ = 0) = 2D (in dimension D) and z[combining macron]c(μ → ∞) = D + 1 by extending the naive Maxwell's counting argument to frictional spheres. The theoretical framework describes different types of systems, such as non-spherical objects in arbitrary dimensions, providing a common mean-field scenario to investigate force transmission, contact networks and coordination numbers of jammed disordered packings.

ClusterTAD: an unsupervised machine learning approach to detecting topologically associated domains of chromosomes from Hi-C data.

PubMed

Oluwadare, Oluwatosin; Cheng, Jianlin

2017-11-14

With the development of chromosomal conformation capturing techniques, particularly, the Hi-C technique, the study of the spatial conformation of a genome is becoming an important topic in bioinformatics and computational biology. The Hi-C technique can generate genome-wide chromosomal interaction (contact) data, which can be used to investigate the higher-level organization of chromosomes, such as Topologically Associated Domains (TAD), i.e., locally packed chromosome regions bounded together by intra chromosomal contacts. The identification of the TADs for a genome is useful for studying gene regulation, genomic interaction, and genome function. Here, we formulate the TAD identification problem as an unsupervised machine learning (clustering) problem, and develop a new TAD identification method called ClusterTAD. We introduce a novel method to represent chromosomal contacts as features to be used by the clustering algorithm. Our results show that ClusterTAD can accurately predict the TADs on a simulated Hi-C data. Our method is also largely complementary and consistent with existing methods on the real Hi-C datasets of two mouse cells. The validation with the chromatin immunoprecipitation (ChIP) sequencing (ChIP-Seq) data shows that the domain boundaries identified by ClusterTAD have a high enrichment of CTCF binding sites, promoter-related marks, and enhancer-related histone modifications. As ClusterTAD is based on a proven clustering approach, it opens a new avenue to apply a large array of clustering methods developed in the machine learning field to the TAD identification problem. The source code, the results, and the TADs generated for the simulated and real Hi-C datasets are available here: https://github.com/BDM-Lab/ClusterTAD .

45 CFR 1217.6 - Roles of volunteers.

Code of Federal Regulations, 2010 CFR

2010-10-01

... roles: (a) Primary contact with VISTA volunteers on personal and administrative matters. (b) Aid in... program concepts with VISTA volunteers and supervisor/sponsor. (g) Advise supervisor on potential problem... best meet goals and objectives addressing the community's problem(s). ...

45 CFR 1217.6 - Roles of volunteers.

Code of Federal Regulations, 2011 CFR

2011-10-01

... roles: (a) Primary contact with VISTA volunteers on personal and administrative matters. (b) Aid in... program concepts with VISTA volunteers and supervisor/sponsor. (g) Advise supervisor on potential problem... best meet goals and objectives addressing the community's problem(s). ...

Theory of gearing

NASA Technical Reports Server (NTRS)

Litvin, Faydor L.

1989-01-01

Basic mathematical problems on the theory of gearing are covered in this book, such as the necessary and sufficient conditions of envelope existence, relations between principal curvatures and directions for surfaces of mating gears. Also included are singularities of surfaces accompanied by undercutting the process of generation, the phenomena of envelope of lines of contact, and the principles for generation of conjugate surfaces. Special attention is given to the algorithms for computer aided simulation of meshing and tooth contact. This edition was complemented with the results of research recently performed by the author and his doctoral students. The book contains sample problems and also problems for the reader to solve.

Social Networking Sites: An Adjunctive Treatment Modality for Psychological Problems

PubMed Central

Menon, Indu S.; Sharma, Manoj Kumar; Chandra, Prabha S.; Thennarasu, K.

2014-01-01

Background: Social networking is seen as a way to enhance social support and feeling of well-being. The present work explores the potentials of social networking sites as an adjunctive treatment modality for initiating treatment contact as well as for managing psychological problems. Materials and Methods: Interview schedule, Facebook intensity questionnaire were administered on 28 subjects with a combination of 18 males and 10 females. They were taken from the in-patient and out-patient psychiatry setting of the hospital. Results: Facebook was the most popular sites and used to seek emotional support on the basis of the frequent updates of emotional content that users put in their profile; reconciliations, escape from the problems or to manage the loneliness; getting information about illness and its treatment and interaction with experts and also manifested as problematic use. Conclusions: It has implications for developing social networking based adjunctive treatment modality for psychological problems. PMID:25035548

Social networking sites: an adjunctive treatment modality for psychological problems.

PubMed

Menon, Indu S; Sharma, Manoj Kumar; Chandra, Prabha S; Thennarasu, K

2014-07-01

Social networking is seen as a way to enhance social support and feeling of well-being. The present work explores the potentials of social networking sites as an adjunctive treatment modality for initiating treatment contact as well as for managing psychological problems. Interview schedule, Facebook intensity questionnaire were administered on 28 subjects with a combination of 18 males and 10 females. They were taken from the in-patient and out-patient psychiatry setting of the hospital. Facebook was the most popular sites and used to seek emotional support on the basis of the frequent updates of emotional content that users put in their profile; reconciliations, escape from the problems or to manage the loneliness; getting information about illness and its treatment and interaction with experts and also manifested as problematic use. It has implications for developing social networking based adjunctive treatment modality for psychological problems.

Two dimensional modeling of elastic wave propagation in solids containing cracks with rough surfaces and friction - Part I: Theoretical background.

PubMed

Aleshin, Vladislav; Delrue, Steven; Trifonov, Andrey; Bou Matar, Olivier; Van Den Abeele, Koen

2018-01-01

Our study aims at the creation of a numerical toolbox that describes wave propagation in samples containing internal contacts (e.g. cracks, delaminations, debondings, imperfect intergranular joints) of known geometry with postulated contact interaction laws including friction. The code consists of two entities: the contact model and the solid mechanics module. Part I of the paper concerns the modeling of internal contacts (called cracks for brevity), while part II is related to the integration of the developed contact model into a solid mechanics module that allows the description of wave propagation processes. The contact model is used to produce normal and tangential load-displacement relationships, which in turn are used by the solid mechanics module as boundary conditions at the internal contacts. Due to friction, the tangential reaction curve is hysteretic and memory-dependent. In addition, it depends on the normal reaction curve. An essential feature of the proposed contact model is that it takes into account the roughness of the contact faces. On one hand, accounting for roughness makes the contact model more complicated since it gives rise to a partial slip regime when some parts on the contact area experience slip and some do not. On the other hand, as we will show, the concept of contact surfaces covered by asperities receding under load makes it possible to formulate a consistent contact model that provides nonlinear load-displacement relationships for any value of the drive displacements and their histories. This is a strong advantage, since this way, the displacement-driven model allows for a simple explicit procedure of data exchange with the solid mechanics module, while more traditional flat-surface contacts driven by loads generate a complex iterative procedure. More specifically, the proposed contact model is based on the previously developed method of memory diagrams that allows one to automatically obtain memory-dependent solutions to frictional contact problems in the particular case of partial slip. Here we extend the solution onto cases of total sliding and contact loss which is possible while using the displacement-driven formulation. The method requires the knowledge of the normal contact response obtained in our case as a result of statistical consideration of roughness of contact faces. Copyright © 2017 Elsevier B.V. All rights reserved.

Infectious disease transmission: survey of contacts between hospital-based healthcare workers and working adults from the general population.

PubMed

Jiang, Lili; Ng, Isabel Hui Leng; Hou, Yan'an; Li, Dunli; Tan, Linda Wei Lin; Ho, Hanley Jian An; Chen, Mark I-Cheng

2018-04-01

Healthcare workers (HCWs) may be the inadvertent interface between the healthcare setting and the community for infectious diseases transmission. To investigate HCWs' contacts during a work day and compare these against working adults from the general population. Prospective survey of contacts through 24 h self-reported diary in three public sector tertiary care hospitals and community-based working adults in Singapore. Participants were HCWs and working adults from the community. In all, 211 HCWs and 1028 working adults reported a total of 4066 and 9206 contacts. HCWs reported more work-related contacts than community-based working adults (median of 13 versus 4), and more contacts that were neither household nor work-related (1 versus 0) but fewer household contacts (2 versus 3). HCWs reported more work-related contacts involving physical contacts, and more new contacts particularly with short duration (≤15 min) compared to community-based working adults. Among different HCW types, doctors reported the highest whereas ward-based nurses reported the lowest total work-related contacts. Around half of ward-based and clinic-based nurses' contacts involved physical touch. Work-related contacts reported by clinic-based nurses, doctors, and assorted HCWs were shorter than in ward-based nurses, with a substantial number effectively occurring with new contacts. Institutional effects significant on univariate analyses were much reduced and non-significant after adjusting for confounding by HCW type. HCWs' contacts differ substantially from those of community-based working adults. HCWs may thus be at higher risk of acquiring and spreading contact-transmissible and respiratory infections due to the nature of their work. Whereas total number of contacts was fairly similar between HCW types, the characteristics of their contacts differed substantively. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

A nodally condensed SUPG formulation for free-surface computation of steady-state flows constrained by unilateral contact - Application to rolling

NASA Astrophysics Data System (ADS)

Arora, Shitij; Fourment, Lionel

2018-05-01

In the context of the simulation of industrial hot forming processes, the resultant time-dependent thermo-mechanical multi-field problem (v →,p ,σ ,ɛ ) can be sped up by 10-50 times using the steady-state methods while compared to the conventional incremental methods. Though the steady-state techniques have been used in the past, but only on simple configurations and with structured meshes, and the modern-days problems are in the framework of complex configurations, unstructured meshes and parallel computing. These methods remove time dependency from the equations, but introduce an additional unknown into the problem: the steady-state shape. This steady-state shape x → can be computed as a geometric correction t → on the domain X → by solving the weak form of the steady-state equation v →.n →(t →)=0 using a Streamline Upwind Petrov Galerkin (SUPG) formulation. There exists a strong coupling between the domain shape and the material flow, hence, a two-step fixed point iterative resolution algorithm was proposed that involves (1) the computation of flow field from the resolution of thermo-mechanical equations on a prescribed domain shape and (2) the computation of steady-state shape for an assumed velocity field. The contact equations are introduced in the penalty form both during the flow computation as well as during the free-surface correction. The fact that the contact description is inhomogeneous, i.e., it is defined in the nodal form in the former, and in the weighted residual form in the latter, is assumed to be critical to the convergence of certain problems. Thus, the notion of nodal collocation is invoked in the weak form of the surface correction equation to homogenize the contact coupling. The surface correction algorithm is tested on certain analytical test cases and the contact coupling is tested with some hot rolling problems.

Skin Rashes and Other Problems

MedlinePlus

... in that area. Start OverDiagnosisThis could be IRRITANT CONTACT DERMATITIS. It’s caused by a reaction to detergents, perfumes ... other soothing lotions. Start OverDiagnosisThis could be ALLERGIC CONTACT DERMATITIS, caused by POISON IVY, poison oak or poison ...

Adaptive methods, rolling contact, and nonclassical friction laws

NASA Technical Reports Server (NTRS)

Oden, J. T.

1989-01-01

Results and methods on three different areas of contemporary research are outlined. These include adaptive methods, the rolling contact problem for finite deformation of a hyperelastic or viscoelastic cylinder, and non-classical friction laws for modeling dynamic friction phenomena.

Rolling contact fatigue : a comprehensive review.

DOT National Transportation Integrated Search

2011-11-01

"Rolling contact fatigue (RCF) is a pervasive and insidious problem on all types of railway systems. Although it is a dominant cause of maintenance and replacements on heavy haul rail lines, it is also a significant economic and safety challenge for ...

Tire Modeling

NASA Technical Reports Server (NTRS)

Tanner, J. A. (Compiler)

1983-01-01

The workshop was organized into six sessions dealing with finite element developments, applications to tire dynamic problems, solution techniques for tire contact problems, experimental data, tire thermal studies, and current design practices.

Mechanically fastened composite laminates subjected to combined bearing-bypass and shear loading

NASA Technical Reports Server (NTRS)

Madenci, Erdogan

1993-01-01

Bolts and rivets provide a means of load transfer in the construction of aircraft. However, they give rise to stress concentrations and are often the source and location of static and fatigue failures. Furthermore, fastener holes are prone to cracks during take-off and landing. These cracks present the most common origin of structural failures in aircraft. Therefore, accurate determination of the contact stresses associated with such loaded holes in mechanically fastened joints is essential to reliable strength evaluation and failure prediction. As the laminate is subjected to loading, the contact region, whose extent is not known, develops between the fastener and the hole boundary through this contact region, which consists of slip and no-slip zones due to friction. The presence of the unknown contact stress distribution over the contact region between the pin and the composite laminate, material anisotropy, friction between the pin and the laminate, pin-hole clearance, combined bearing-bypass and shear loading, and finite geometry of the laminate result in a complex non-linear problem. In the case of bearing-bypass loading in compression, this non-linear problem is further complicated by the presence of dual contact regions. Previous research concerning the analysis of mechanical joints subjected to combined bearing-bypass and shear loading is non-existent. In the case of bearing-bypass loading only, except for the study conducted by Naik and Crews (1991), others employed the concept of superposition which is not valid for this non-linear problem. Naik and Crews applied a linear finite element analysis with conditions along the pin-hole contact region specified as displacement constraint equations. The major shortcoming of this method is that the variation of the contract region as a function of the applied load should be known a priori. Also, their analysis is limited to symmetric geometry and material systems, and frictionless boundary conditions. Since the contact stress distribution and the contact region are not known a priori, they did not directly impose the boundary conditions appropriate for modelling the contact and on-contact regions between the fastener and the hole. Furthermore, finite element analysis is not suitable for iterative design calculations for optimizing laminate construction in the presence of fasteners under complex loading conditions. In this study, the solution method developed by Madenci and Ileri (1992a,b) has been extended to determine the contact stresses in mechanical joints under combined bearing-bypass and shear loading, and bearing-bypass loading in compression resulting in dual contact regions.

A comparative study between two smoothing strategies for the simulation of contact with large sliding

NASA Astrophysics Data System (ADS)

Batailly, Alain; Magnain, Benoît; Chevaugeon, Nicolas

2013-05-01

The numerical simulation of contact problems is still a delicate matter especially when large transformations are involved. In that case, relative large slidings can occur between contact surfaces and the discretization error induced by usual finite elements may not be satisfactory. In particular, usual elements lead to a facetization of the contact surface, meaning an unavoidable discontinuity of the normal vector to this surface. Uncertainty over the precision of the results, irregularity of the displacement of the contact nodes and even numerical oscillations of contact reaction force may result of such discontinuity. Among the existing methods for tackling such issue, one may consider mortar elements (Fischer and Wriggers, Comput Methods Appl Mech Eng 195:5020-5036, 2006; McDevitt and Laursen, Int J Numer Methods Eng 48:1525-1547, 2000; Puso and Laursen, Comput Methods Appl Mech Eng 93:601-629, 2004), smoothing of the contact surfaces with additional geometrical entity (B-splines or NURBS) (Belytschko et al., Int J Numer Methods Eng 55:101-125, 2002; Kikuchi, Penalty/finite element approximations of a class of unilateral contact problems. Penalty method and finite element method, ASME, New York, 1982; Legrand, Modèles de prediction de l'interaction rotor/stator dans un moteur d'avion Thèse de doctorat. PhD thesis, École Centrale de Nantes, Nantes, 2005; Muñoz, Comput Methods Appl Mech Eng 197:979-993, 2008; Wriggers and Krstulovic-Opara, J Appl Math Mech (ZAMM) 80:77-80, 2000) and, the use of isogeometric analysis (Temizer et al., Comput Methods Appl Mech Eng 200:1100-1112, 2011; Hughes et al., Comput Methods Appl Mech Eng 194:4135-4195, 2005; de Lorenzis et al., Int J Numer Meth Eng, in press, 2011). In the present paper, we focus on these last two methods which are combined with a finite element code using the bi-potential method for contact management (Feng et al., Comput Mech 36:375-383, 2005). A comparative study focusing on the pros and cons of each method regarding geometrical precision and numerical stability for contact solution is proposed. The scope of this study is limited to 2D contact problems for which we consider several types of finite elements. Test cases are given in order to illustrate this comparative study.

I-TASSER: fully automated protein structure prediction in CASP8.

PubMed

Zhang, Yang

2009-01-01

The I-TASSER algorithm for 3D protein structure prediction was tested in CASP8, with the procedure fully automated in both the Server and Human sections. The quality of the server models is close to that of human ones but the human predictions incorporate more diverse templates from other servers which improve the human predictions in some of the distant homology targets. For the first time, the sequence-based contact predictions from machine learning techniques are found helpful for both template-based modeling (TBM) and template-free modeling (FM). In TBM, although the accuracy of the sequence based contact predictions is on average lower than that from template-based ones, the novel contacts in the sequence-based predictions, which are complementary to the threading templates in the weakly or unaligned regions, are important to improve the global and local packing in these regions. Moreover, the newly developed atomic structural refinement algorithm was tested in CASP8 and found to improve the hydrogen-bonding networks and the overall TM-score, which is mainly due to its ability of removing steric clashes so that the models can be generated from cluster centroids. Nevertheless, one of the major issues of the I-TASSER pipeline is the model selection where the best models could not be appropriately recognized when the correct templates are detected only by the minority of the threading algorithms. There are also problems related with domain-splitting and mirror image recognition which mainly influences the performance of I-TASSER modeling in the FM-based structure predictions. Copyright 2009 Wiley-Liss, Inc.

Microstructural Characterization of Base Metal Alloys with Conductive Native Oxides for Electrical Contact Applications

NASA Astrophysics Data System (ADS)

Senturk, Bilge Seda

Metallic contacts are a ubiquitous method of connecting electrical and electronic components/systems. These contacts are usually fabricated from base metals because they are inexpensive, have high bulk electrical conductivities and exhibit excellent formability. Unfortunately, such base metals oxidize in air under ambient conditions, and the characteristics of the native oxide scales leads to contact resistances orders of magnitude higher than those for mating bare metal surface. This is a critical technological issue since the development of unacceptably high contact resistances over time is now by far the most common cause of failure in electrical/electronic devices and systems. To overcome these problems, several distinct approaches are developed for alloying base metals to promote the formation of self-healing inherently conductive native oxide scales. The objective of this dissertation study is to demonstrate the viability of these approaches through analyzing the data from Cu-9La (at%) and Fe-V binary alloy systems. The Cu-9 La alloy structure consists of eutectic colonies tens of microns in diameter wherein a rod-like Cu phase lies within a Cu6La matrix phase. The thin oxide scale formed on the Cu phase was found to be Cu2O as expected while the thicker oxide scale formed on the Cu6La phase was found to be a polycrystalline La-rich Cu2O. The enhanced electrical conductivity in the native oxide scale of the Cu-9La alloy arises from heavy n-type doping of the Cu2O lattice by La3+. The Fe-V alloy structures consist of a mixture of large elongated and equiaxed grains. A thin polycrystalline Fe3O4 oxide scale formed on all of the Fe-V alloys. The electrical conductivities of the oxide scales formed on the Fe-V alloys are higher than that formed on pure Fe. It is inferred that this enhanced conductivity arises from doping of the magnetite with V+4 which promotes electron-polaron hopping. Thus, it has been demonstrated that even in simple binary alloy systems one can obtain a dramatic reduction in the contact resistances of alloy oxidized surfaces as compared with those of the pure base metals.

Prediction of residue-residue contact matrix for protein-protein interaction with Fisher score features and deep learning.

PubMed

Du, Tianchuan; Liao, Li; Wu, Cathy H; Sun, Bilin

2016-11-01

Protein-protein interactions play essential roles in many biological processes. Acquiring knowledge of the residue-residue contact information of two interacting proteins is not only helpful in annotating functions for proteins, but also critical for structure-based drug design. The prediction of the protein residue-residue contact matrix of the interfacial regions is challenging. In this work, we introduced deep learning techniques (specifically, stacked autoencoders) to build deep neural network models to tackled the residue-residue contact prediction problem. In tandem with interaction profile Hidden Markov Models, which was used first to extract Fisher score features from protein sequences, stacked autoencoders were deployed to extract and learn hidden abstract features. The deep learning model showed significant improvement over the traditional machine learning model, Support Vector Machines (SVM), with the overall accuracy increased by 15% from 65.40% to 80.82%. We showed that the stacked autoencoders could extract novel features, which can be utilized by deep neural networks and other classifiers to enhance learning, out of the Fisher score features. It is further shown that deep neural networks have significant advantages over SVM in making use of the newly extracted features. Copyright © 2016. Published by Elsevier Inc.

Energy-conserving impact algorithm for the heel-strike phase of gait.

PubMed

Kaplan, M L; Heegaard, J H

2000-06-01

Significant ground reaction forces exceeding body weight occur during the heel-strike phase of gait. The standard methods of analytical dynamics used to solve the impact problem do not accommodate well the heel-strike collision due to the persistent contact at the front foot and presence of contact at the back foot. These methods can cause a non-physical energy gain on the order of the total kinetic energy of the system at impact. Additionally, these standard techniques do not quantify the contact force, but the impulse over the impact. We present an energy-conserving impact algorithm based on the penalty method to solve for the ground reaction forces during gait. The rigid body assumptions are relaxed and the bodies are allowed to penetrate one another to a small degree. Associated with the deformation is a potential, from which the contact forces are derived. The empirical coefficient-of-restitution used in the standard approaches is replaced by two parameters to characterize the stiffness and the damping of the materials. We solve two simple heel-strike models to illustrate the shortcomings of a standard approach and the suitability of the proposed method for use with gait.

Non-contact procedure to measure heart and lung activities in preterm pediatric patients with skin disorders

NASA Astrophysics Data System (ADS)

Marchionni, P.; Scalise, L.; Antognoli, L.; Nobile, S.; Carnielli, V. P.

2018-04-01

Preterm patients can have an higher risk of fatalities and can be subjected to long-term disability. With many organs still in the phase of development, the earlier the delivery, the higher the risk and they are therefore hospitalized in specialized neonatal intensive care units) where heart rate and lungs activity are continuously assessed. These are mostly monitored by set of electrodes placed in contact with skin (two in thorax area and one in abdominal area). This paper address the problem of preterm cardiac and respiratory monitoring in a patient with severe skin disorders who can not monitored with standard electrodes because of his dry, thickened, scaly skin. As a solution, we propose a fully non-contact measurement method, based on laser Doppler vibrometry, able to continuously record the movements of wall-chest and extract from this signal, the heart rate and the respiratory activity of the patient. The results show a good agreement between the standard contact measurement methods and the proposed one (no statistical difference between data) with a data uncertainty of 2.9% for the heart rate data and of 9.5% for the respiration rate (k=2), in line with the classical measurement methods.

Bifurcation of elastic solids with sliding interfaces

NASA Astrophysics Data System (ADS)

Bigoni, D.; Bordignon, N.; Piccolroaz, A.; Stupkiewicz, S.

2018-01-01

Lubricated sliding contact between soft solids is an interesting topic in biomechanics and for the design of small-scale engineering devices. As a model of this mechanical set-up, two elastic nonlinear solids are considered jointed through a frictionless and bilateral surface, so that continuity of the normal component of the Cauchy traction holds across the surface, but the tangential component is null. Moreover, the displacement can develop only in a way that the bodies in contact do neither detach, nor overlap. Surprisingly, this finite strain problem has not been correctly formulated until now, so this formulation is the objective of the present paper. The incremental equations are shown to be non-trivial and different from previously (and erroneously) employed conditions. In particular, an exclusion condition for bifurcation is derived to show that previous formulations based on frictionless contact or `spring-type' interfacial conditions are not able to predict bifurcations in tension, while experiments-one of which, ad hoc designed, is reported-show that these bifurcations are a reality and become possible when the correct sliding interface model is used. The presented results introduce a methodology for the determination of bifurcations and instabilities occurring during lubricated sliding between soft bodies in contact.

Interventions to reduce discrimination and stigma: the state of the art.

PubMed

Gronholm, Petra C; Henderson, Claire; Deb, Tanya; Thornicroft, Graham

2017-03-01

There is a rich literature on the nature of mental health-related stigma and the processes by which it severely affects the life chances of people with mental health problems. However, applying this knowledge to deliver and evaluate interventions to reduce discrimination and stigma in a lasting way is a complex and long-term challenge. We conducted a narrative synthesis of systematic reviews published since 2012, and supplemented this with papers published subsequently as examples of more recent work. There is evidence for small to moderate positive impacts of both mass media campaigns and interventions for target groups in terms of stigma-related knowledge, attitudes, and intended behaviour in terms of desire for contact. However, the limited evidence from longer follow-up times suggests that it is not clear whether short-term contact interventions have a lasting impact. The risk that short-term interventions may only have a short-term impact suggests a need to study longer term interventions and to use interim process and outcome data to improve interventions along the way. There is scope for more thorough application of intergroup contact theory whenever contact is used and of evidence-based teaching and assessment methods when skills training is used for target groups.

[Mortality from contact with poisonous snakes and lizards in Mexico from 1979 to 2003].

PubMed

Frayre-Torres, María José; Sevilla-Godínez, Elizabeth; Orozco-Valerio, Maria de Jesús; Armas, Jesús; Celis, Alfredo

2006-01-01

To describe the trend of standardized mortality by contact with poisonous snakes and lizards in Mexico from 1979 to 2003. We describe the standardized mortality trend by contact with poisonous snakes and lizards occurring in Mexico from 1979 to 2003, and report the mortality data bases from the INEGI (Instituto Nacional de Estadística, Geografía e Informática). We determined frequencies, percentages, mortality rates, standardized mortality rates and mortality relative risks with 95% confidence intervals. The general trend shows a statistically significant descent of 63.8%. The highest mortality rate within the 2000-2003 period was reported in Quintana Roo (7.47/1,000,000), Oaxaca (4.01/1,000,000), Veracruz (1.56/1,000,000), Chiapas (1.48/1,000,000), Campeche (1.43/1,000,000) and Yucatan (1.29/1,000,000). The groups with the highest risk are those older than 60 years and males. In spite of the detected decrease in mortality, the contact with poisonous snakes and lizards still is a public health problem in Mexico. As timely treatment saves lives, it is necessary to include and offer treatment in all emergency units of the country.

First principles calculation of current-induced forces in atomic gold contacts

NASA Astrophysics Data System (ADS)

Brandbyge, Mads; Stokbro, Kurt; Taylor, Jeremy; Mozos, Jose-Luis; Ordejon, Pablo

2002-03-01

We have recently developed an first principles method [1] for calculating the electronic structure, electronic transport, and forces acting on the atoms, for atomic scale systems connected to semi-infinite electrodes and with an applied voltage bias. Our method is based on the density functional theory (DFT) as implemented in the well tested SIESTA program [2]. We fully deal with the atomistic structure of the whole system, treating both the contact and the electrodes on the same footing. The effect of the finite bias (including selfconsistency and the solution of the electrostatic problem) is taken into account using nonequilibrium Green's functions. In this talk we show results for the forces acting on the contact atoms due to the nonequilibrium situation in the electronic subsystem, i.e. in the presence of an electronic current. We concentrate on one atom wide gold contacts/wires connected to bulk gold electrodes. References [1] Our implementation is called TranSIESTA and is described in M. Brandbyge, J. Taylor, K. Stokbro, J-L. Mozos, and P. Ordejon, cond-mat/0110650 [2] D. Sanchez-Portal, P. Ordejon, E. Artacho and J. Soler, Int. J. Quantum Chem. 65, 453 (1997).

Optimal information dissemination strategy to promote preventive behaviors in multilayer epidemic networks.

PubMed

Shakeri, Heman; Sahneh, Faryad Darabi; Scoglio, Caterina; Poggi-Corradini, Pietro; Preciado, Victor M

2015-06-01

Launching a prevention campaign to contain the spread of infection requires substantial financial investments; therefore, a trade-off exists between suppressing the epidemic and containing costs. Information exchange among individuals can occur as physical contacts (e.g., word of mouth, gatherings), which provide inherent possibilities of disease transmission, and non-physical contacts (e.g., email, social networks), through which information can be transmitted but the infection cannot be transmitted. Contact network (CN) incorporates physical contacts, and the information dissemination network (IDN) represents non-physical contacts, thereby generating a multilayer network structure. Inherent differences between these two layers cause alerting through CN to be more effective but more expensive than IDN. The constraint for an epidemic to die out derived from a nonlinear Perron-Frobenius problem that was transformed into a semi-definite matrix inequality and served as a constraint for a convex optimization problem. This method guarantees a dying-out epidemic by choosing the best nodes for adopting preventive behaviors with minimum monetary resources. Various numerical simulations with network models and a real-world social network validate our method.

When work calls-associations between being contacted outside of regular working hours for work-related matters and health.

PubMed

Arlinghaus, Anna; Nachreiner, Friedhelm

2013-11-01

Boundaries between work and private life are diminishing, but little is known on how this influences worker health. Therefore, we examined the association between work-related contacts outside of regular working hours by e-mail or phone and self-reported health in a representative sample of European employees (n = 23 760). The risk of reporting ≥1 health problem(s) was increased in workers contacted sometimes (odds ratio [OR]: 1.16, 95% confidence interval [CI]: 1.06-1.27) or often (OR: 1.23, 95% CI: 1.12-1.34) as compared with never, controlling for several demographic and workplace characteristics. Further research is needed to quantify work and nonwork patterns and their health effects.

An effective medium approach to predict the apparent contact angle of drops on super-hydrophobic randomly rough surfaces.

PubMed

Bottiglione, F; Carbone, G

2015-01-14

The apparent contact angle of large 2D drops with randomly rough self-affine profiles is numerically investigated. The numerical approach is based upon the assumption of large separation of length scales, i.e. it is assumed that the roughness length scales are much smaller than the drop size, thus making it possible to treat the problem through a mean-field like approach relying on the large-separation of scales. The apparent contact angle at equilibrium is calculated in all wetting regimes from full wetting (Wenzel state) to partial wetting (Cassie state). It was found that for very large values of the roughness Wenzel parameter (r(W) > -1/ cos θ(Y), where θ(Y) is the Young's contact angle), the interface approaches the perfect non-wetting condition and the apparent contact angle is almost equal to 180°. The results are compared with the case of roughness on one single scale (sinusoidal surface) and it is found that, given the same value of the Wenzel roughness parameter rW, the apparent contact angle is much larger for the case of a randomly rough surface, proving that the multi-scale character of randomly rough surfaces is a key factor to enhance superhydrophobicity. Moreover, it is shown that for millimetre-sized drops, the actual drop pressure at static equilibrium weakly affects the wetting regime, which instead seems to be dominated by the roughness parameter. For this reason a methodology to estimate the apparent contact angle is proposed, which relies only upon the micro-scale properties of the rough surface.

Dual contact pogo pin assembly

DOEpatents

Hatch, Stephen McGarry

2015-01-20

A contact assembly includes a base and a pair of electrical contacts supported by the base. A first end of the first electrical contact corresponds to a first end of the base and is configured to engage a first external conductive circuit element. A first end of the second electrical contact also corresponds to the first end of the base and is configured to engage a second external conductive circuit element. The first contact and the second contact are electrically isolated from one another and configured to compress when engaging an external connector element. The base includes an aperture positioned on a second end of the base outboard of a second end of the first and second electrical contacts. The aperture presents a narrowing shape with a wide mouth distal the electrical contacts and a narrow internal through-hole proximate the electrical contacts.

Dual contact pogo pin assembly

DOEpatents

Hatch, Stephen McGarry

2016-06-21

A contact assembly includes a base and a pair of electrical contacts supported by the base. A first end of the first electrical contact corresponds to a first end of the base and is configured to engage a first external conductive circuit element. A first end of the second electrical contact also corresponds to the first end of the base and is configured to engage a second external conductive circuit element. The first contact and the second contact are electrically isolated from one another and configured to compress when engaging an external connector element. The base includes an aperture positioned on a second end of the base outboard of a second end of the first and second electrical contacts. The aperture presents a narrowing shape with a wide mouth distal the electrical contacts and a narrow internal through-hole proximate the electrical contacts.

Beliefs about dangerousness of people with mental health problems: the role of media reports and personal exposure to threat or harm.

PubMed

Reavley, N J; Jorm, A F; Morgan, A J

2016-09-01

To assess the associations between beliefs about the dangerousness of people with mental health problems and exposure to media reports of violence or personal experiences of fear, threat or harm. Telephone interviews were carried out with 5220 Australians aged 18+. Respondents heard a vignette of a person with depression or early schizophrenia and were asked whether they believed him to be dangerous. Other questions covered past 12-month recall of media reports of violence and mental health problems, contact with and experiences of fear, threat or harm by people with mental health problems. Multinomial logistic regression was used to assess the associations between beliefs about dangerousness and media and these types of contact with people with mental health problems. For the early schizophrenia vignette, recall of media reports and having felt afraid of someone were associated with beliefs about dangerousness. For the depression vignette, media reports about violence and mental health problems or the experiences of feeling afraid or having been threatened or harmed were not strongly associated with beliefs about dangerousness. For both vignettes, knowing someone with a mental health problem and having a higher level of education were associated with less belief in dangerousness. Media reports may play a greater role in forming attitudes in low prevalence disorders and further efforts to reduce any adverse impact of media reporting should focus on these disorders. The study also supports the effectiveness of contact with people with mental health problems in reducing beliefs about dangerousness.

Vesicoureteral Reflux

MedlinePlus

... problems, such as urinary incontinence , bedwetting , and urinary retention bowel problems, such as constipation Most children with ... Coordinating Committees Strategic Plans & Reports Research Areas FAQs Jobs at NIDDK Visit Us Contact Us News News ...

Engaging patients via mobile phone technology to assist follow-up after hospitalization in Quito, Ecuador.

PubMed

Maslowsky, Julie; Valsangkar, Bina; Chung, Jennifer; Rasanathan, Jennifer; Cruz, Freddy Trujillo; Ochoa, Marco; Chiriboga, Monica; Astudillo, Fernando; Heisler, Michele; Merajver, Sofia

2012-05-01

Disease management following hospital discharge is difficult in most low-resourced areas, posing a major obstacle to health equity. Although mobile phones are a ubiquitous and promising technology to facilitate healthcare access, few studies have tested the acceptability and feasibility of patients themselves using the devices for assisting linkages to healthcare services. We hypothesized that patients would use mobile phones to help manage postdischarge problems, if given a communication protocol. We developed a mobile phone-based program and investigated its acceptability and feasibility as a method of delivering posthospitalization care. A consecutive cohort of adult patients in a public hospital in Quito, Ecuador was enrolled over a 1-month period. A hospital-based nurse relayed patients' discharge instructions to a community-based nurse. Patients corresponded with this nurse via text messaging and phone calls according to a protocol to initiate and participate in follow-up. Eighty-nine percent of eligible patients participated. Ninety-seven percent of participants completed at least one contact with the nurse; 81% initiated contact themselves. Nurses completed 262 contacts with 32 patients, clarifying discharge instructions, providing preventive education, and facilitating clinic appointments. By this method, 87% of patients were successfully linked to follow-up appointments. High levels of patient participation and successful delivery of follow-up services indicate the mobile phone program's acceptability and feasibility for facilitating posthospitalization follow-up. Patients actively used mobile phones to interact with nurses, enabling the provision of posthospitalization medical advice and facilitate community-based care via mobile phone.

Pilot Data of a Brief Veteran Peer Intervention and Its Relationship to Mental Health Treatment Engagement.

PubMed

Goetter, Elizabeth M; Bui, Eric; Weiner, Travis P; Lakin, Laura; Furlong, Thomas; Simon, Naomi M

2017-05-11

Underutilization of mental health care is a significant problem among veterans. Offering peer support may improve mental health care engagement. This observational pilot study was conducted using an institutional review board-approved data repository to preliminarily evaluate the association and potential impact of a clinic-based veteran peer outreach strategy on treatment engagement and dropout. Veteran peer outreach coordinators (VPOCs) provided systematic contact (a) within 1 week after clinical evaluation and (b) 1 month after the patient's first treatment session to patients entering treatment at a specialty mental health clinic that provides military-informed mental health care to post-9/11 veterans and service members. Individuals were 102 consecutive Operation Enduring Freedom/Operation Iraqi Freedom/Operation New Dawn veteran psychotherapy referrals seen at an outpatient clinic. At 6 months, participants who received both contacts from VPOC had more psychotherapy sessions (M = 10.85, SD = 8.25) compared with those who had received no contact (M = 5.47, SD = 6.41) from VPOCs, t = 2.56, p < .05. The dropout rate was also significantly lower for those who received both peer outreach contacts (17.39%) compared with those who received only 1 VPOC contact (51.11%) or no VPOC contact (43.75%), χ2 = 7.27, p < .05. Veteran peer outreach may be associated with better engagement in mental health treatment and lower dropout. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Erase the battle lines: how to cut out conflicts with MCO case managers.

PubMed

1999-02-01

With managed care penetration increasing, it's more important than ever for hospital case managers to find ways to resolve the inevitable conflicts that arise with their managed care-based counterparts. Typical conflicts include struggles over authorization, vendor selection, lack of contact, and access to the patient. Some conflicts can be resolved simply by increasing the level of communication--usually by having managed care case managers stationed in the hospital itself. But even when contact is only by telephone, there are steps you can take to ease the tension. One way is simply to keep managed care case managers informed regarding such things as return admissions by problem patients. Effective discharge planning practices also can strengthen bonds, especially when it comes to patients with complex care needs.

An analysis of whether a working-age ward-based liaison psychiatry service requires the input of a liaison psychiatrist.

PubMed

Guthrie, Elspeth A; McMeekin, Aaron T; Khan, Sylvia; Makin, Sally; Shaw, Ben; Longson, Damien

2017-06-01

Aims and method This article presents a 12-month case series to determine the fraction of ward referrals of adults of working age who needed a liaison psychiatrist in a busy tertiary referral teaching hospital. Results The service received 344 referrals resulting in 1259 face-to-face contacts. Depression accounted for the most face-to-face contacts. We deemed the involvement of a liaison psychiatrist necessary in 241 (70.1%) referrals, with medication management as the most common reason. Clinical implications A substantial amount of liaison ward work involves the treatment and management of severe and complex mental health problems. Our analysis suggests that in the majority of cases the input of a liaison psychiatrist is required.

Emergent Fermi Sea in A System of Interacting Bosons

NASA Astrophysics Data System (ADS)

Wu, Yinghai; Jain, Jainendra

2015-03-01

An understanding of the possible ways in which interactions can produce fundamentally new emergent many-body states is a central problem of condensed matter physics. We ask if a Fermi sea can arise in a system of bosons subject to contact interaction. Based on exact diagonalization studies and variational wave functions, we predict that such a state is likely to occur when a system of two-component bosons in two dimensions, interacting via a species independent contact interaction, is exposed to a synthetic magnetic field of strength that corresponds to a filling factor of unity. The bosons each bind a single vortex as a result of the repulsive interaction, and these fermionic bound states, namely composite fermions, form a spin-singlet Fermi sea. Financial support from the DOE under Grant No. DE-SC0005042.

Mental Illness Stigma Intervention in African Americans: Examining Two Delivery Methods.

PubMed

Vinson, Ebony S; Abdullah, Tahirah; Brown, Tamara L

2016-05-01

Stigma surrounding mental illness and mental health treatment remains a significant problem, particularly among African Americans. This study sought to examine the effects of 2 intervention delivery methods in reducing reported stigma. African Americans (n = 158) were nonrandomly assigned to an in-person contact or video condition and administered a survey immediately before, after, and 2 weeks following the stigma intervention. The in vivo contact condition consisted of an African American man discussing his experiences with mental illness and psychotherapy. The session was recorded, and the recording was used for the video condition. There were no significant effects based on delivery method; however, there was a significant effect for time on stigma and help-seeking attitude measures. Further research is needed to determine the overall effectiveness of the intervention.

Properties of pendular liquid bridges determined on Delaunay's roulettes

NASA Astrophysics Data System (ADS)

Mielniczuk, Boleslaw; Millet, Olivier; Gagneux, Gérard; El Youssoufi, Moulay Said

2017-06-01

This work addresses the study of capillary bridge properties between two grains, with use of recent analytical model, based on solutions of Young-Laplace equation from an inverse problem. A simple explicit criterion allows to classify the profile of capillary bridge as a surface of revolution with constant mean curvature (Delaunay roulette) using its measured geometrical parameters (gorge radius, contact angle, half-filling angle). Necessary data are obtained from experimental tests, realized on liquid bridges between two equal spherical grains. Sequences of images are recorded at several (fixed) volumes of liquid and different separations distances between the spheres (from contact to rupture), in laboratory and in micro-gravity conditions. For each configuration, an exact parametric representation of the meridian is revealed. Mean bridge curvature, internal pressure and intergranular capillary force are also determined.

Finite Element Simulation of Articular Contact Mechanics with Quadratic Tetrahedral Elements

PubMed Central

Maas, Steve A.; Ellis, Benjamin J.; Rawlins, David S.; Weiss, Jeffrey A.

2016-01-01

Although it is easier to generate finite element discretizations with tetrahedral elements, trilinear hexahedral (HEX8) elements are more often used in simulations of articular contact mechanics. This is due to numerical shortcomings of linear tetrahedral (TET4) elements, limited availability of quadratic tetrahedron elements in combination with effective contact algorithms, and the perceived increased computational expense of quadratic finite elements. In this study we implemented both ten-node (TET10) and fifteen-node (TET15) quadratic tetrahedral elements in FEBio (www.febio.org) and compared their accuracy, robustness in terms of convergence behavior and computational cost for simulations relevant to articular contact mechanics. Suitable volume integration and surface integration rules were determined by comparing the results of several benchmark contact problems. The results demonstrated that the surface integration rule used to evaluate the contact integrals for quadratic elements affected both convergence behavior and accuracy of predicted stresses. The computational expense and robustness of both quadratic tetrahedral formulations compared favorably to the HEX8 models. Of note, the TET15 element demonstrated superior convergence behavior and lower computational cost than both the TET10 and HEX8 elements for meshes with similar numbers of degrees of freedom in the contact problems that we examined. Finally, the excellent accuracy and relative efficiency of these quadratic tetrahedral elements was illustrated by comparing their predictions with those for a HEX8 mesh for simulation of articular contact in a fully validated model of the hip. These results demonstrate that TET10 and TET15 elements provide viable alternatives to HEX8 elements for simulation of articular contact mechanics. PMID:26900037

Approximate stresses in 2-D flat elastic contact fretting problems

NASA Astrophysics Data System (ADS)

Urban, Michael Rene

Fatigue results from the cyclic loading of a solid body. If the body subject to fatigue is in contact with another body and relative sliding motion occurs between these two bodies, then rubbing surface damage can accelerate fatigue failure. The acceleration of fatigue failure is especially important if the relative motion between the two bodies results in surface damage without excessive surface removal via wear. The situation just described is referred to as fretting fatigue. Understanding of fretting fatigue is greatly enhanced if the stress state associated with fretting can be characterized. For Hertzian contact, this can readily be done. Unfortunately, simple stress formulae are not available for flat body contact. The primary result of the present research is the development of a new, reasonably accurate, approximate closed form expression for 2-dimensional contact stresses which has been verified using finite element modeling. This expression is also combined with fracture mechanics to provide a simple method of determining when a crack is long enough to no longer be affected by the contact stress field. Lower bounds on fatigue life can then easily be calculated using fracture mechanics. This closed form expression can also be used to calculate crack propagation within the contact stress field. The problem of determining the cycles required to generate an initial crack and what to choose as an initial crack size is unresolved as it is in non-fretting fatigue.

Theory of equilibria of elastic 2-braids with interstrand interaction

NASA Astrophysics Data System (ADS)

Starostin, E. L.; van der Heijden, G. H. M.

2014-03-01

Motivated by continuum models for DNA supercoiling we formulate a theory for equilibria of 2-braids, i.e., structures formed by two elastic rods winding around each other in continuous contact and subject to a local interstrand interaction. No assumption is made on the shape of the contact curve. The theory is developed in terms of a moving frame of directors attached to one of the strands. The other strand is tracked by including in this frame the normalised closest-approach chord connecting the two strands. The kinematic constant-distance constraint is formulated at strain level through the introduction of what we call braid strains. As a result the total potential energy involves arclength derivatives of these strains, thus giving rise to a second-order variational problem. The Euler-Lagrange equations for this problem give balance equations for the overall braid force and moment referred to the moving frame as well as differential equations that can be interpreted as effective constitutive relations encoding the effect that the second strand has on the first as the braid deforms under the action of end loads. Hard contact models are used to obtain the normal contact pressure between strands that has to be non-negative for a physically realisable solution without the need for external devices such as clamps or glue to keep the strands together. The theory is first illustrated by a number of problems that can be solved analytically and then applied to several new problems that have not hitherto been treated.

A finite-element model for moving contact line problems in immiscible two-phase flow

NASA Astrophysics Data System (ADS)

Kucala, Alec

2017-11-01

Accurate modeling of moving contact line (MCL) problems is imperative in predicting capillary pressure vs. saturation curves, permeability, and preferential flow paths for a variety of applications, including geological carbon storage (GCS) and enhanced oil recovery (EOR). The macroscale movement of the contact line is dependent on the molecular interactions occurring at the three-phase interface, however most MCL problems require resolution at the meso- and macro-scale. A phenomenological model must be developed to account for the microscale interactions, as resolving both the macro- and micro-scale would render most problems computationally intractable. Here, a model for the moving contact line is presented as a weak forcing term in the Navier-Stokes equation and applied directly at the location of the three-phase interface point. The moving interface is tracked with the level set method and discretized using the conformal decomposition finite element method (CDFEM), allowing for the surface tension and the wetting model to be computed at the exact interface location. A variety of verification test cases for simple two- and three-dimensional geometries are presented to validate the current MCL model, which can exhibit grid independence when a proper scaling for the slip length is chosen. Sandia National Laboratories is a multi-mission laboratory managed and operated by National Technology and Engineering Solutions of Sandia, LLC., a wholly owned subsidiary of Honeywell International, Inc., for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA-0003525.

Analysis of edge impact stresses in composite plates

NASA Technical Reports Server (NTRS)

Moon, F. C.; Kang, C. K.

1974-01-01

The in-plane edge impact of composite plates, with or without a protection strip, is investigated. A computational analysis based on the Fast Fourier Transform technique is presented. The particular application of the present method is in the understanding of the foreign object damage problem of composite fan blades. The method is completely general and may be applied to the study of other stress wave propagation problems in a half space. Results indicate that for the protective strip to be effective in reducing impact stresses in the composite the thickness must be equal or greater than the impact contact dimension. Large interface shear stresses at the strip - composite boundary can be induced under impact.

Variational and numerical analysis of a quasistatic viscoelastic problem with normal compliance, friction and damage

NASA Astrophysics Data System (ADS)

Han, Weimin; Shillor, Meir; Sofonea, Mircea

2001-12-01

We consider a model for quasistatic frictional contact between a viscoelastic body and a foundation. The material constitutive relation is assumed to be nonlinear. The mechanical damage of the material, caused by excessive stress or strain, is described by the damage function, the evolution of which is determined by a parabolic inclusion. The contact is modeled with the normal compliance condition and the associated version of Coulomb's law of dry friction. We derive a variational formulation for the problem and prove the existence of its unique weak solution. We then study a fully discrete scheme for the numerical solutions of the problem and obtain error estimates on the approximate solutions.

Involvement in the Juvenile Justice System for African American Adolescents: Examining Associations with Behavioral Health Problems

PubMed Central

Voisin, Dexter R.; Kim, Dongha; Takahashi, Lois; Morotta, Phillip; Bocanegra, Kathryn

2017-01-01

While researchers have found that African American youth experience higher levels of juvenile justice involvement at every system level (arrest, sentencing, and incarceration) relative to their other ethnic counterparts, few studies have explored how juvenile justice involvement and number of contacts might be correlated with this broad range of problems. A convenience sample of 638 African American adolescents living in predominantly low-income, urban communities participated in a survey related to juvenile justice involvement. Major findings using logistic regression models indicated that adolescents who reported juvenile justice system involvement versus no involvement were 2.3 times as likely to report mental health problems, substance abuse, and delinquent or youth offending behaviors. Additional findings documented that the higher the number of juvenile justice system contacts, the higher the rates of delinquent behaviors, alcohol and marijuana use, sex while high on drugs, and commercial sex. These findings suggest that identifying and targeting youth who have multiple juvenile justice system contacts, especially those in low-resourced communities for early intervention services, may be beneficial. Future research should examine whether peer network norms might mediate the relationships between juvenile justice involvement and youth problem behaviors. PMID:28966415

Involvement in the Juvenile Justice System for African American Adolescents: Examining Associations with Behavioral Health Problems.

PubMed

Voisin, Dexter R; Kim, Dongha; Takahashi, Lois; Morotta, Phillip; Bocanegra, Kathryn

2017-01-01

While researchers have found that African American youth experience higher levels of juvenile justice involvement at every system level (arrest, sentencing, and incarceration) relative to their other ethnic counterparts, few studies have explored how juvenile justice involvement and number of contacts might be correlated with this broad range of problems. A convenience sample of 638 African American adolescents living in predominantly low-income, urban communities participated in a survey related to juvenile justice involvement. Major findings using logistic regression models indicated that adolescents who reported juvenile justice system involvement versus no involvement were 2.3 times as likely to report mental health problems, substance abuse, and delinquent or youth offending behaviors. Additional findings documented that the higher the number of juvenile justice system contacts, the higher the rates of delinquent behaviors, alcohol and marijuana use, sex while high on drugs, and commercial sex. These findings suggest that identifying and targeting youth who have multiple juvenile justice system contacts, especially those in low-resourced communities for early intervention services, may be beneficial. Future research should examine whether peer network norms might mediate the relationships between juvenile justice involvement and youth problem behaviors.

Social-cognitive determinants of help-seeking for mental health problems among prison inmates.

PubMed

Skogstad, Philip; Deane, Frank P; Spicer, John

2006-01-01

Prisoners experience high rates of mental health problems and suicidal behaviours. Failure to seek help may exacerbate these problems and limit opportunities to participate in offending-related programmes. To assess whether prisoners'; intentions to seek help for a personal-emotional problem, including suicidal feelings, can be predicted using variables from the Theory of Planned Behaviour (TPB). These TPB variables were supplemented by measures of emotional distress, prior contact with a psychologist and demographic variables. Male inmates from six New Zealand prisons were asked to participate, with approximately 50% (n = 527) of those who initially expressed an interest in the study completing the self-report questionnaire. Most participants completed the questionnaire in small-group meetings in the prison units and returned them to the researchers immediately after completion.Results On average, participants reported higher levels of current emotional distress than comparison student samples. TPB variables predicted help-seeking intentions for suicidality and personal-emotional problems. Those with prior contact with prison psychologists had lower intentions to seek help for suicidal feelings than prisoners without such contact. Older prisoners, those with more years of education, and those who had previous contact with a psychologist outside prison tended to have higher intentions to seek psychological help. Social-cognitive factors predicted intentions to seek help among New Zealand prisoners but prison-specific issues, such as relative reluctance to seek help when suicidal and reluctance to seek help from prison psychologists, were also identified. Implications for practice Prisoners'; access to services could be improved, for example, through directly working on attitudinal barriers. Strategies to ensure access to specialized forensic mental health in-reach services could also be an alternative or additional route to ensure that this disadvantaged group seeks appropriate help.

Development of a tool for assessment and care planning for dementia-related problem behaviors in home and community-based services programs: the Problem Behavior Inventory.

PubMed

Phillips, V L; Diwan, Sadhna; Egner, Amanda

2002-01-01

To describe development, validity, and application of the Problem Behavior Inventory (PBI), a tool to assess dementia-related problem behaviors (DRPBs) in community-based populations. Demographic, contact, and disease-specific data were extracted from client files from a Medicaid-funded home and community-based services program. Primary caregivers completed standard surveys relating to the care recipients' memory, mood, and behaviors. The client (care recipient) completed the Mini-Mental Status Exam (MMSE). Cognitively impaired clients, enrolled in the Community Care Services Program (CCSP) during a reference month, and their primary caregivers, were identified by CCSP case managers for participation in the study. Primary caregivers completed the Revised Memory and Behavior Problem Checklist (RMBPC). Clients screening positive for the presence of DRPBs based on caregiver responses to the RMBPC were then assessed using the Problem Behavior Inventory (PBI). Within the CCSP sample, the most prevalent behavior was appearing sad or depressed (67%), while the most frequent behavior was seeking attention, occurring at least daily in 58% of the group. The most bothersome behaviors were being sexually inappropriate, wandering, and misbehaving in public. Examination by behavior category (physical, verbal, mood, etc.) revealed a strong relationship between level of bother and behavior frequency. Frequency of verbal behaviors was positively related to MMSE scores, whereas frequency of ADL-related behaviors was inversely related to MMSE scores. Bother scores were not associated with MMSE scores. This study documents that the PBI is a valid, useful, and feasible tool for assessing DRPBs in community populations. Case managers using the PBI can determine specific problem behavior areas among client populations and for individual clients and institute client-specific interventions to address each issue.

Effect of initial contact surface condition on the friction and wear properties of bearing steel in cyclic reciprocating sliding contact

NASA Astrophysics Data System (ADS)

Tanaka, Y.; Endo, M.; Moriyama, S.

2017-05-01

Delamination failure is one of the most important engineering problems. This failure can frequently be detrimental to rolling contact machine elements such as bearings, gear wheels, etc. This phenomenon, called rolling contact fatigue, has a close relationship not only with opening-mode but also with shear-mode fatigue crack growth. The crack face interference is known to significantly affect the shear-mode fatigue crack propagation and its threshold behavior. Quantitative investigation on friction and wear at fatigue crack faces in the material is essentially impossible. Previously, thus, a novel ring-on-ring test by making use of fatigue testing machine was proposed to simulate a cyclic reciprocating sliding contact of crack surfaces. However, this test procedure had some problems. For instance, in order to achieve the uniform contact at the start of test, the rubbing of specimens must be conducted in advance. By this treatment, the specimen surfaces were already damaged before the test. In this study, an improvement of experimental method was made to perform the test using the damage-free specimens. The friction and wear properties for heat-treated high carbon-chromium bearing steel were investigated with this new method and the results were compared to the results obtained by using the initially damaged specimens.

Anomalous Temperature Dependence in Metal-Black Phosphorus Contact.

PubMed

Li, Xuefei; Grassi, Roberto; Li, Sichao; Li, Tiaoyang; Xiong, Xiong; Low, Tony; Wu, Yanqing

2018-01-10

Metal-semiconductor contact has been the performance limiting problem for electronic devices and also dictates the scaling potential for future generation devices based on novel channel materials. Two-dimensional semiconductors beyond graphene, particularly few layer black phosphorus, have attracted much attention due to their exceptional electronic properties such as anisotropy and high mobility. However, due to its ultrathin body nature, few layer black phosphorus-metal contact behaves differently than conventional Schottky barrier (SB) junctions, and the mechanisms of its carrier transport across such a barrier remain elusive. In this work, we examine the transport characteristic of metal-black phosphorus contact under varying temperature. We elucidated the origin of apparent negative SB heights extracted from classical thermionic emission model and also the phenomenon of metal-insulator transition observed in the current-temperature transistor characteristic. In essence, we found that the SB height can be modulated by the back-gate voltage, which beyond a certain critical point becomes so low that the injected carrier can no longer be described by the conventional thermionic emission theory. The transition from transport dominated by a Maxwell-Boltzmann distribution for the high energy tail states, to that of a Fermi distribution by low energy Fermi sea electrons, is the physical origin of the observed metal-insulator transition. We identified two distinctive tunneling limited transport regimes in the contact: vertical and longitudinal tunneling.

The effect of the interaction of cracks in orthotropic layered materials under compressive loading.

PubMed

Winiarski, B; Guz, I A

2008-05-28

The non-classical problem of fracture mechanics of composites compressed along the layers with interfacial cracks is analysed. The statement of the problem is based on the model of piecewise homogeneous medium, the most accurate within the framework of the mechanics of deformable bodies as applied to composites. The condition of plane strain state is examined. The layers are modelled by a transversally isotropic material (a matrix reinforced by continuous parallel fibres). The frictionless Hertzian contact of the crack faces is considered. The complex fracture mechanics problem is solved using the finite-element analysis. The shear mode of stability loss is studied. The results are obtained for the typical dispositions of cracks. It was found that the interacting crack faces, the crack length and the mutual position of cracks influence the critical strain in the composite.

Eldercare at Home: Breathing Problems

MedlinePlus

... Contact Aging & Health A to Z Find a Geriatrics Healthcare Professional Medications & Older Adults Making Your Wishes ... and assist in the use of oxygen. Oxygen therapy is sometimes prescribed for breathing problems. Treatment can ...

Generation of gear tooth surfaces by application of CNC machines

NASA Technical Reports Server (NTRS)

Litvin, F. L.; Chen, N. X.

1994-01-01

This study will demonstrate the importance of application of computer numerically controlled (CNC) machines in generation of gear tooth surfaces with new topology. This topology decreases gear vibration and will extend the gear capacity and service life. A preliminary investigation by a tooth contact analysis (TCA) program has shown that gear tooth surfaces in line contact (for instance, involute helical gears with parallel axes, worm gear drives with cylindrical worms, etc.) are very sensitive to angular errors of misalignment that cause edge contact and an unfavorable shape of transmission errors and vibration. The new topology of gear tooth surfaces is based on the localization of bearing contact, and the synthesis of a predesigned parabolic function of transmission errors that is able to absorb a piecewise linear function of transmission errors caused by gear misalignment. The report will describe the following topics: description of kinematics of CNC machines with six degrees of freedom that can be applied for generation of gear tooth surfaces with new topology. A new method for grinding of gear tooth surfaces by a cone surface or surface of revolution based on application of CNC machines is described. This method provides an optimal approximation of the ground surface to the given one. This method is especially beneficial when undeveloped ruled surfaces are to be ground. Execution of motions of the CNC machine is also described. The solution to this problem can be applied as well for the transfer of machine tool settings from a conventional generator to the CNC machine. The developed theory required the derivation of a modified equation of meshing based on application of the concept of space curves, space curves represented on surfaces, geodesic curvature, surface torsion, etc. Condensed information on these topics of differential geometry is provided as well.

Revisiting the block method for evaluating thermal conductivities of clay and granite

USDA-ARS?s Scientific Manuscript database

Determination of thermal conductivities of porous media using the contact method is revisited and revalidated with consideration of thermal contact resistance. Problems that limit the accuracy of determination of thermal conductivities of porous media are discussed. Thermal conductivities of granite...

Stress intensity factors in a cracked infinite elastic wedge loaded by a rigid punch

NASA Technical Reports Server (NTRS)

Erdogan, F.; Civelek, M. B.

1978-01-01

A plane elastic wedge-shaped solid was split through the application of a rigid punch. It was assumed that the coefficient of friction on the the contact area was constant, and the problem had a plane of symmetry with respect to loading and geometry, with the crack in the plane of symmetry. The problem was formulated in terms of a system of integral equations with the contact stress and the derivative of the crack surface displacement as the unknown functions. The solution was obtained for an internal crack and for an edge crack. The results include primarily the stress intensity factors at the crack tips, and the measure of the stress singularity at the wedge apex, and at the end points of the contact area.

How I Manage Athlete's Foot.

PubMed

Stauffer, L W

1986-07-01

In brief: Athlete's foot is a term used to describe a variety of dermatological problems. This article is limited to the management of contact dermatitis and fungal infection. To cure contact dermatitis the cause must be discovered and eliminated. Often a substance used in manufacturing shoes is at fault. Fungal infections can be treated with topical fungicides. Athletes can reduce the playing time lost because of foot problems by seeking treatment as soon as itching, peeling, or swelling occur. Proper diagnosis and careful selection of treatment modalities keep feet functioning at peak capacity.

Wormgear geometry adopted for implementing hydrostatic lubrication and formulation of the lubrication problem

NASA Technical Reports Server (NTRS)

Sun, D. C.; Yuan, Qin

1995-01-01

The geometrical parameters for a wormgear intended to be used as the transmission in advanced helicopters are finalized. The resulting contact pattern of the meshing tooth surfaces is suitable for the implementation of hydrostatic lubrication Fluid film lubrication of the contact is formulated considering external pressurization as well as hydrodynamic wedge and squeeze actions. The lubrication analysis is aimed at obtaining the oil supply pressure needed to separate the worm and gear surfaces by a prescribed minimum film thickness. The procedure of solving the mathematical problem is outlined.

Problems in Evaluating Adult Literacy Programmes.

ERIC Educational Resources Information Center

Rajyalakshmi, C.

1980-01-01

The study of the Functional Literacy Program in India encountered problems of opposition to evaluation, inappropriate respondents, and difficulties in contacting participants, which point to changes that should be made in the evaluation methods. (SK)

An evaluation of independent consumer assistance centers on problem resolution and user satisfaction: the consumer perspective.

PubMed

Nascimento, Lori Miller; Cousineau, Michael R

2005-04-01

Individuals who wish to receive independent assistance to resolve access to care health problems have limited options. The Health Consumer Alliance (HCA) is an independent, coordinated effort of nine legal services organizations that provide free assistance to low-income health consumers in 10 California counties. The need for the HCA stems from the vast number of health consumers with unanswered questions and unresolved problems relating to access to care issues, among both insured and uninsured populations. However, little is known about the effectiveness of independent consumer assistance centers. This paper examines the effectiveness of a network of independent consumer assistance programs in resolving consumer problems and consumers' level of satisfaction with services received. As the project evaluators, we conducted telephone surveys with 1,291 users of the HCA to assess if this independent program resolved consumer problems, and to measure the level of satisfaction among HCA users. Specifically, we asked questions about the HCA's influence on problem resolution, consumer satisfaction, health insurance status and use of preventive care services. From 1997 to 2001, more than 46,000 consumers contacted the seven health consumer centers (HCCs). According to our sample of respondents, results show that the HCCs are an important resource for low-income Californians trying to access health care. After contacting the HCCs, 62 percent of the participants report that their problems were resolved. In addition, 87 percent of the participants said the HCCs were helpful and 95 percent said they would be likely to contact the HCC again if necessary.

Application of CPL with Interference Mapping Lithography to generate random contact reticle designs for the 65-nm node

NASA Astrophysics Data System (ADS)

Van Den Broeke, Douglas J.; Laidig, Thomas L.; Chen, J. Fung; Wampler, Kurt E.; Hsu, Stephen D.; Shi, Xuelong; Socha, Robert J.; Dusa, Mircea V.; Corcoran, Noel P.

2004-08-01

Imaging contact and via layers continues to be one of the major challenges to be overcome for 65nm node lithography. Initial results of using ASML MaskTools' CPL Technology to print contact arrays through pitch have demonstrated the potential to further extend contact imaging to a k1 near 0.30. While there are advantages and disadvantages for any potential RET, the benefits of not having to solve the phase assignment problem (which can lead to unresolvable phase conflicts), of it being a single reticle - single exposure technique, and its application to multiple layers within a device (clear field and dark field) make CPL an attractive, cost effective solution to low k1 imaging. However, real semiconductor circuit designs consist of much more than regular arrays of contact holes and a method to define the CPL reticle design for a full chip circuit pattern is required in order for this technique to be feasible in volume manufacturing. Interference Mapping Lithography (IML) is a novel approach for defining optimum reticle patterns based on the imaging conditions that will be used when the wafer is exposed. Figure 1 shows an interference map for an isolated contact simulated using ASML /1150 settings of 0.75NA and 0.92/0.72/30deg Quasar illumination. This technique provides a model-based approach for placing all types features (scattering bars, anti-scattering bars, non-printing assist features, phase shifted and non-phase shifted) for the purpose of enhancing the resolution of the target pattern and it can be applied to any reticle type including binary (COG), attenuated phase shifting mask (attPSM), alternating aperture phase shifting mask (altPSM), and CPL. In this work, we investigate the application of IML to generate CPL reticle designs for random contact patterns that are typical for 65nm node logic devices. We examine the critical issues related to using CPL with Interference Mapping Lithography including controlling side lobe printing, contact patterns with odd symmetry, forbidden pitch regions, and reticle manufacturing constraints. Multiple methods for deriving the interference map used to define reticle patterns for various RET's will be discussed. CPL reticle designs that were created from implementing automated algorithms for contact pattern decomposition using MaskWeaver will also be presented.

Database of amino acid-nucleotide contacts in contacts in DNA-homeodomain protein

NASA Astrophysics Data System (ADS)

Grokhlina, T. I.; Zrelov, P. V.; Ivanov, V. V.; Polozov, R. V.; Chirgadze, Yu. N.; Sivozhelezov, V. S.

2013-09-01

The analysis of amino acid-nucleotide contacts in interfaces of the protein-DNA complexes, intended to find consistencies in the protein-DNA recognition, is a complex problem that requires an analysis of the physicochemical characteristics of these contacts and the positions of the participating amino acids and nucleotides in the chains of the protein and the DNA, respectively, as well as conservatism of these contacts. Thus, those heterogeneous data should be systematized. For this purpose we have developed a database of amino acid-nucleotide contacts ANTPC (Amino acid Nucleotide Type Position Conservation) following the archetypal example of the proteins in the homeodomain family. We show that it can be used to compare and classify the interfaces of the protein-DNA complexes.

A survey of wheel-rail contact models for rail vehicles

NASA Astrophysics Data System (ADS)

Meymand, Sajjad Z.; Keylin, Alexander; Ahmadian, Mehdi

2016-03-01

Accurate and efficient contact models for wheel-rail interaction are essential for the study of the dynamic behaviour of a railway vehicle. Assessment of the contact forces and moments, as well as contact geometry provide a fundamental foundation for such tasks as design of braking and traction control systems, prediction of wheel and rail wear, and evaluation of ride safety and comfort. This paper discusses the evolution and the current state of the theories for solving the wheel-rail contact problem for rolling stock. The well-known theories for modelling both normal contact (Hertzian and non-Hertzian) and tangential contact (Kalker's linear theory, FASTSIM, CONTACT, Polach's theory, etc.) are reviewed. The paper discusses the simplifying assumptions for developing these models and compares their functionality. The experimental studies for evaluation of contact models are also reviewed. This paper concludes with discussing open areas in contact mechanics that require further research for developing better models to represent the wheel-rail interaction.

Finite element simulation of articular contact mechanics with quadratic tetrahedral elements.

PubMed

Maas, Steve A; Ellis, Benjamin J; Rawlins, David S; Weiss, Jeffrey A

2016-03-21

Although it is easier to generate finite element discretizations with tetrahedral elements, trilinear hexahedral (HEX8) elements are more often used in simulations of articular contact mechanics. This is due to numerical shortcomings of linear tetrahedral (TET4) elements, limited availability of quadratic tetrahedron elements in combination with effective contact algorithms, and the perceived increased computational expense of quadratic finite elements. In this study we implemented both ten-node (TET10) and fifteen-node (TET15) quadratic tetrahedral elements in FEBio (www.febio.org) and compared their accuracy, robustness in terms of convergence behavior and computational cost for simulations relevant to articular contact mechanics. Suitable volume integration and surface integration rules were determined by comparing the results of several benchmark contact problems. The results demonstrated that the surface integration rule used to evaluate the contact integrals for quadratic elements affected both convergence behavior and accuracy of predicted stresses. The computational expense and robustness of both quadratic tetrahedral formulations compared favorably to the HEX8 models. Of note, the TET15 element demonstrated superior convergence behavior and lower computational cost than both the TET10 and HEX8 elements for meshes with similar numbers of degrees of freedom in the contact problems that we examined. Finally, the excellent accuracy and relative efficiency of these quadratic tetrahedral elements was illustrated by comparing their predictions with those for a HEX8 mesh for simulation of articular contact in a fully validated model of the hip. These results demonstrate that TET10 and TET15 elements provide viable alternatives to HEX8 elements for simulation of articular contact mechanics. Copyright © 2016 Elsevier Ltd. All rights reserved.

Repeated-Dose and Reproductive/Developmental Toxicity of NTO (3-Nitro-1,2,4-Triazol-5-One) in the Rat

DTIC Science & Technology

2014-03-21

caused by a parasitic problem or contact dermatitis , the lacerations resolved with topical treatment prior to the skin scrape being performed. Several...14 8 Discussion 16 9 Conclusions 18 10 Point of Contact 19 Appendices A References...postpartum did not indicate that NTO presents a developmental hazard. 18 Toxicology Study No. 85-XC-OFP4-12, April-July 2012 10 Point of Contact

Military aviation: a contact lens review.

PubMed

Lattimore, M R

1990-10-01

The military aviation communities have benefitted from the development of advanced electro-optical avionics systems. One drawback that has emerged is an increasing system incompatibility with traditional spectacle visual corrections. An alternative solution to the refractive error correction problem that some services have been investigating is that of contact lens wear. Since this much-debated topic is currently of command interest, a general overview of contact lens issues is presented as a framework for future discussions.

Contact-aware simulations of particulate Stokesian suspensions

NASA Astrophysics Data System (ADS)

Lu, Libin; Rahimian, Abtin; Zorin, Denis

2017-10-01

We present an efficient, accurate, and robust method for simulation of dense suspensions of deformable and rigid particles immersed in Stokesian fluid in two dimensions. We use a well-established boundary integral formulation for the problem as the foundation of our approach. This type of formulation, with a high-order spatial discretization and an implicit and adaptive time discretization, have been shown to be able to handle complex interactions between particles with high accuracy. Yet, for dense suspensions, very small time-steps or expensive implicit solves as well as a large number of discretization points are required to avoid non-physical contact and intersections between particles, leading to infinite forces and numerical instability. Our method maintains the accuracy of previous methods at a significantly lower cost for dense suspensions. The key idea is to ensure interference-free configuration by introducing explicit contact constraints into the system. While such constraints are unnecessary in the formulation, in the discrete form of the problem, they make it possible to eliminate catastrophic loss of accuracy by preventing contact explicitly. Introducing contact constraints results in a significant increase in stable time-step size for explicit time-stepping, and a reduction in the number of points adequate for stability.

New Results on Contact Binary Stars

NASA Astrophysics Data System (ADS)

He, J.; Qian, S.; Zhu, L.; Liu, L.; Liao, W.

2014-08-01

Contact binary star is a kind of close binary with the strongest interaction binary system. Their formations and evolutions are unsolved problems in astrophysics. Since 2000, our groups have observed and studied more than half a hundred of contact binaries. In this report, I will summarize our new results of some contact binary stars (e.g. UZ CMi, GSC 03526-01995, FU Dra, GSC 0763-0572, V524 Mon, MR Com, etc.). They are as follow: (1) We discovered that V524 Mon and MR Com are shallow-contact binaries with their period decreasing; (2) GSC 03526-01995 is middle-contact binary without a period increasing or decreasing continuously; (3) UZ CMi, GSC 0763-0572 and FU Dra are middle-contact binaries with the period increasing continuously; (4) UZ CMi, GSC 03526-01995, FU Dra and V524 Mon show period oscillation which may imply the presence of additional components in these contact binaries.

Reasons for encounter and disease patterns in Danish primary care: changes over 16 years.

PubMed

Moth, Grete; Olesen, Frede; Vedsted, Peter

2012-06-01

Approximately 98% of Danish citizens are listed with a general practice which they consult for medical advice. Although 85% of the population contact their general practitioner (GP) every year, little is known about these contacts. The aim of the present paper is to gain updated knowledge about patients' reasons for encounter and the GP activities and to make comparisons with a similar study from 1993. All GPs in the Central Denmark Region were invited to register all contacts during one randomly chosen day within a year. The registration included questions about patients' reasons for encounter, the types and contents of the contacts, referrals, and distribution between new episodes and follow-up contacts. Aggregated data were compared with the results from 1993. A total of 404 (46%) GPs participated. The number of contacts per 1000 inhabitants had risen by 19.7%. The reasons for encounter and final diagnoses resembled those in 1993. Musculoskeletal, psychological, and respiratory problems were the most common reasons for encounter, psychological problems being the only type to increase over the period. Interestingly, the proportion of diagnoses within the ICPC 'A' chapter rose from 13.5 to 19.7%. The referral rate rose by 2% (relative: 18.7%) from 10.7% to 12.7% and the share of follow-up contacts rose from 45.9% to 50.4% (relative: 8.7%). Quite small changes were seen in the patterns of reasons for encounter and diagnoses from 1993 to 2009. However, an increase was found in contacts with general practice and referrals and in the proportion of follow-ups.

Human-directed social behaviour in dogs shows significant heritability.

PubMed

Persson, M E; Roth, L S V; Johnsson, M; Wright, D; Jensen, P

2015-04-01

Through domestication and co-evolution with humans, dogs have developed abilities to attract human attention, e.g. in a manner of seeking assistance when faced with a problem solving task. The aims of this study were to investigate within breed variation in human-directed contact seeking in dogs and to estimate its genetic basis. To do this, 498 research beagles, bred and kept under standardized conditions, were tested in an unsolvable problem task. Contact seeking behaviours recorded included both eye contact and physical interactions. Behavioural data was summarized through a principal component analysis, resulting in four components: test interactions, social interactions, eye contact and physical contact. Females scored significantly higher on social interactions and physical contact and age had an effect on eye contact scores. Narrow sense heritabilities (h(2) ) of the two largest components were estimated at 0.32 and 0.23 but were not significant for the last two components. These results show that within the studied dog population, behavioural variation in human-directed social behaviours was sex dependent and that the utilization of eye contact seeking increased with age and experience. Hence, heritability estimates indicate a significant genetic contribution to the variation found in human-directed social interactions, suggesting that social skills in dogs have a genetic basis, but can also be shaped and enhanced through individual experiences. This research gives the opportunity to further investigate the genetics behind dogs' social skills, which could also play a significant part into research on human social disorders such as autism. © 2015 John Wiley & Sons Ltd and International Behavioural and Neural Genetics Society.

Influence of Time to Change's social marketing interventions on stigma in England 2009-2011.

PubMed

Evans-Lacko, Sara; Malcolm, Estelle; West, Keon; Rose, Diana; London, Jillian; Rüsch, Nicolas; Little, Kirsty; Henderson, Claire; Thornicroft, Graham

2013-04-01

England's Time To Change (TTC) social marketing campaign emphasised social contact between people with and without mental health problems to reduce stigma and discrimination. We aimed to assess the effectiveness of the mass media component and also that of the mass social contact events. Online interviews were performed before and after each burst of mass media social marketing to evaluate changes in knowledge, attitudes and behaviour and associations between campaign awareness and outcomes. Participants at social contact events were asked about the occurrence and quality of contact, attitudes, readiness to discuss mental health and intended behaviour towards people with mental health problems. Prompted campaign awareness was 38-64%. A longitudinal improvement was noted for one intended behaviour item but not for knowledge or attitudes. Campaign awareness was positively associated with greater knowledge (β = 0.80, 95% CI 0.52-1.08) and more favourable attitudes (commonality OR 1.37, 95% CI 1.10-1.70; dangerousness OR 1.41, 95% CI 1.22-1.63) and intended behaviour (β = 0.75, 95% CI 0.53-0.96). Social contact at events demonstrated a positive impact (M = 2.68) v. no contact (M = 2.42) on perceived attitude change; t(211) = 3.30, P = 0.001. Contact quality predicted more positive attitude change (r = 0.33, P<0.01) and greater confidence to challenge stigma (r = 0.38, P<0.01). The favourable short-term consequences of the social marketing campaign suggest that social contact can be used by anti-stigma programmes to reduce stigma.

Dynamics of the Molten Contact Line

NASA Technical Reports Server (NTRS)

Sonin, Ain A.; Duthaler, Gregg; Liu, Michael; Torresola, Javier; Qiu, Taiqing

1999-01-01

The purpose of this program is to develop a basic understanding of how a molten material front spreads over a solid that is below its melting point, arrests, and freezes. Our hope is that the work will contribute toward a scientific knowledge base for certain new applications involving molten droplet deposition, including the "printing" of arbitrary three-dimensional objects by precise deposition of individual molten microdrops that solidify after impact. Little information is available at this time on the capillarity-driven motion and arrest of molten contact line regions. Schiaffino and Sonin investigated the arrest of the contact line of a molten microcrystalline wax spreading over a subcooled solid "target" of the same material. They found that contact line arrest takes place at an apparent liquid contact angle that depends primarily on the Stefan number S=c(T(sub f) -T(sub t)/L based on the temperature difference between the fusion point and the target temperature, and proposed that contact line arrest occurs when the liquid's dynamic contact angle approaches the angle of attack of the solidification front just behind the contact line. They also showed, however, that the conventional continuum equations and boundary conditions have no meaningful solution for this angle. The solidification front angle is determined by the heat flux just behind the contact line, and the heat flux is singular at that point. By comparing experiments with numerical computations, Schiaffino and Sonin estimated that the conventional solidification model must break down within a distance of order 0.1 - 1 microns of the contact line. The physical mechanism for this breakdown is as yet undetermined, and no first-principles theory exists for the contact angle at arrest. Schiaffino and Sonin also presented a framework for understanding how to moderate Weber number molten droplet deposition in terms of similarity laws and experimentation. The study is based on experiments with three molten materials- molten wax on solid wax, water on ice, and mercury on frozen mercury- which between them span a considerable range of the deposition/solidification similarity parameters. Correlations are obtained for the spreading velocity, spreading time scales, the spreading factor (i.e. ratio of deposited drop's final footprint radius and the drop's initial radius), post-spreading liquid oscillation amplitudes and time scales, and bulk solidification time scales. Duthaler carried out an experimental and theoretical investigation of the relationship between the liquid's apparent contact angle and the Capillary number Ca=mu U/sigma based on contact line speed, for molten materials spreading over subcooled solids. This relationship is required for modeling of melt spreading. We have adapted Voinov's methodology to the molten contact line and formulated a theoretical model for the Ca vs. contact angle relationship, based Schiaffino and Sonin#s (1997a,b) wedge-like solidification front model. With the solidification front angle taken from Schiaffino and Sonin, the model is in good agreement with the experimental results for Ca vs. contact angle. Duthaler also extended the experimental investigation of droplet deposition and contact line freezing to more materials, including solder on glass, solder on solder, water on ice, and molten microcrystalline wax on wax. The latter also included tests on inclined targets. Deposition tests have also been done with molten octacosane (C28H58) on various targets. An important objective of our program has been the development of micron-scale sensors for measuring the transient temperature at a point on the substrate surface as a molten contact line moves over it. The expectation is that this temperature history will yield a better understanding of the thermal process in the contact line region. The sensors are of the thermistor type, either 2.5 microns or 1.5 microns square, microfabricated with silicon-based technology on either pure silicon or amorphous silicon dioxide chips. Each chip has 32 sensors distributed on its surface in arrays. The time response is better than 10 ms. At the time of writing, sensor calibration is in progress. Results on thermal transients during contact line passage will be discussed at the conference. While we expect that the data will provide information on the near-contact-line heat transfer process, we also foresee possible problems. First, the spatial resolution of the sensors may be insufficient to resolve the near-contact-line region. Second, the sensors protrude about 0.5 microns above the substrate surface, and may affect the contact line motion. Third, a sensor's temperature history depends on both the heat flux distribution into it from the fusion front and the thermal properties of the substrate below it and the solidified melt between it and the fusion front. The heat flux distribution in the contact line region must therefore be unfolded from computations of the overall system's transient thermal response.

Mechanics of advancing pin-loaded contacts with friction

NASA Astrophysics Data System (ADS)

Sundaram, Narayan; Farris, T. N.

2010-11-01

This paper considers finite friction contact problems involving an elastic pin and an infinite elastic plate with a circular hole. Using a suitable class of Green's functions, the singular integral equations governing a very general class of conforming contact problems are formulated. In particular, remote plate stresses, pin loads, moments and distributed loading of the pin by conservative body forces are considered. Numerical solutions are presented for different partial slip load cases. In monotonic loading, the dependence of the tractions on the coefficient of friction is strongest when the contact is highly conforming. For less conforming contacts, the tractions are insensitive to an increase in the value of the friction coefficient above a certain threshold. The contact size and peak pressure in monotonic loading are only weakly dependent on the pin load distribution, with center loads leading to slightly higher peak pressure and lower peak shear than distributed loads. In contrast to half-plane cylinder fretting contacts, fretting behavior is quite different depending on whether or not the pin is allowed to rotate freely. If pin rotation is disallowed, the fretting tractions resemble half-plane fretting tractions in the weakly conforming regime but the contact resists sliding in the strongly conforming regime. If pin rotation is allowed, the shear traction behavior resembles planar rolling contacts in that one slip zone is dominant and the peak shear occurs at its edge. In this case, the effects of material dissimilarity in the strongly conforming regime are only secondary and the contact never goes into sliding. Fretting tractions in the forward and reversed load states show shape asymmetry, which persists with continued load cycling. Finally, the governing integro-differential equation for full sliding is derived; in the limiting case of no friction, the same equation governs contacts with center loading and uniform body force loading, resulting in identical pressures when their resultants are equal.

Using Data Analysis Problems in a Large General Microbiology Course.

ERIC Educational Resources Information Center

Deutch, Charles E.

1997-01-01

Argues that data analysis problems can be used successfully in large introductory microbiology courses, even when exams consist entirely of multiple-choice questions and out-of-class contact with the instructor is limited. Discusses course organization, problem structure, student performance and response, advantages of using data analysis…

7 CFR 1291.10 - Reporting and oversight requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., identify and share the lessons learned to help expedite problem-solving. (6) Contact Person. List the... period to meet measurable outcomes for each project. (2) Problems and Delays. Note unexpected delays or... include the following: (1) Project Summary. An outline of the issue, problem, interest, or need for each...

Research in nonlinear structural and solid mechanics

NASA Technical Reports Server (NTRS)

Mccomb, H. G., Jr. (Compiler); Noor, A. K. (Compiler)

1980-01-01

Nonlinear analysis of building structures and numerical solution of nonlinear algebraic equations and Newton's method are discussed. Other topics include: nonlinear interaction problems; solution procedures for nonlinear problems; crash dynamics and advanced nonlinear applications; material characterization, contact problems, and inelastic response; and formulation aspects and special software for nonlinear analysis.

Computational Methods for Frictional Contact With Applications to the Space Shuttle Orbiter Nose-Gear Tire

NASA Technical Reports Server (NTRS)

Tanner, John A.

1996-01-01

A computational procedure is presented for the solution of frictional contact problems for aircraft tires. A Space Shuttle nose-gear tire is modeled using a two-dimensional laminated anisotropic shell theory which includes the effects of variations in material and geometric parameters, transverse-shear deformation, and geometric nonlinearities. Contact conditions are incorporated into the formulation by using a perturbed Lagrangian approach with the fundamental unknowns consisting of the stress resultants, the generalized displacements, and the Lagrange multipliers associated with both contact and friction conditions. The contact-friction algorithm is based on a modified Coulomb friction law. A modified two-field, mixed-variational principle is used to obtain elemental arrays. This modification consists of augmenting the functional of that principle by two terms: the Lagrange multiplier vector associated with normal and tangential node contact-load intensities and a regularization term that is quadratic in the Lagrange multiplier vector. These capabilities and computational features are incorporated into an in-house computer code. Experimental measurements were taken to define the response of the Space Shuttle nose-gear tire to inflation-pressure loads and to inflation-pressure loads combined with normal static loads against a rigid flat plate. These experimental results describe the meridional growth of the tire cross section caused by inflation loading, the static load-deflection characteristics of the tire, the geometry of the tire footprint under static loading conditions, and the normal and tangential load-intensity distributions in the tire footprint for the various static vertical loading conditions. Numerical results were obtained for the Space Shuttle nose-gear tire subjected to inflation pressure loads and combined inflation pressure and contact loads against a rigid flat plate. The experimental measurements and the numerical results are compared.

Computational methods for frictional contact with applications to the Space Shuttle orbiter nose-gear tire: Comparisons of experimental measurements and analytical predictions

NASA Technical Reports Server (NTRS)

Tanner, John A.

1996-01-01

A computational procedure is presented for the solution of frictional contact problems for aircraft tires. A Space Shuttle nose-gear tire is modeled using a two-dimensional laminated anisotropic shell theory which includes the effects of variations in material and geometric parameters, transverse-shear deformation, and geometric nonlinearities. Contact conditions are incorporated into the formulation by using a perturbed Lagrangian approach with the fundamental unknowns consisting of the stress resultants, the generalized displacements, and the Lagrange multipliers associated with both contact and friction conditions. The contact-friction algorithm is based on a modified Coulomb friction law. A modified two-field, mixed-variational principle is used to obtain elemental arrays. This modification consists of augmenting the functional of that principle by two terms: the Lagrange multiplier vector associated with normal and tangential node contact-load intensities and a regularization term that is quadratic in the Lagrange multiplier vector. These capabilities and computational features are incorporated into an in-house computer code. Experimental measurements were taken to define the response of the Space Shuttle nose-gear tire to inflation-pressure loads and to inflation-pressure loads combined with normal static loads against a rigid flat plate. These experimental results describe the meridional growth of the tire cross section caused by inflation loading, the static load-deflection characteristics of the tire, the geometry of the tire footprint under static loading conditions, and the normal and tangential load-intensity distributions in the tire footprint for the various static vertical-loading conditions. Numerical results were obtained for the Space Shuttle nose-gear tire subjected to inflation pressure loads and combined inflation pressure and contact loads against a rigid flat plate. The experimental measurements and the numerical results are compared.

Reasons and pathways of first-time consultations at child and adolescent mental health services in Italy: an observational study.

PubMed

Pedrini, Laura; Sisti, Davide; Tiberti, Alessandra; Preti, Antonio; Fabiani, Michela; Ferraresi, Linda; Palazzi, Stefano; Parisi, Roberto; Ricciutello, Cosimo; Rocchi, Marco B L; Squarcia, Antonella; Trebbi, Stefano; Tullini, Andrea; De Girolamo, Giovanni

2015-01-01

An increasing number of young people have made contact with the Child and Adolescent Mental Health Services (CAMHS). However, only a small proportion of the population with emotional problems, actually seek specialized care. Research concerning the help-seeking process and pathways to care of a clinical sample could help to develop effective health policies to facilitate access to specialized care. To analyze the access pattern for CAMHS, reasons of contact and care pathways of a consecutive sample of first-time patients. Our aim was to analyze the association between source of referral, socio-demographic and clinical variables. Standardized assessment instruments and information concerning access patterns and care pathways were collected from 399 patients at first-time contact with CAMHS in a Northern Italian Region. Most patients were referred to CAMHS by school teachers (36 %) or health professionals (32 %), while only 17 % of the parents sought help by themselves. School issues (50 %) and emotional problems (17 %) were the most frequent reasons for contact. The proportion of first-time contacts with no diagnosis of mental disorder at their first consultation did not differ by source of referral. Parents of children who did not receive a clinical diagnosis of mental disorders described them as "psychosocially impaired" and their condition as "clinically severe" likewise parents of patients who received a psychiatric diagnosis. Patients with externalizing problems were more frequently referred by the parents themselves, while youth with internalizing problems were more often referred through health professionals. Families with non-traditional structures (adoptive, foster care, mono-parental) were more likely to consult CAMHS directly, while immigrant youth were more often referred by teachers. Socio-demographic and clinical characteristics can affect pathways to care. To improve early access to care for children and adolescents with ongoing mental disorders, a plan for proper action addressed to teachers and health professionals may well be important. This would improve their ability to recognize emotional and behavioral problems and use proper referral pathways, while informative intervention addressed to non-Italian families should inform them about the functioning and the mission of CAMHS.

Latent profile analysis of teacher perceptions of parent contact and comfort.

PubMed

Stormont, Melissa; Herman, Keith C; Reinke, Wendy M; David, Kimberly B; Goel, Nidhi

2013-09-01

The purpose of the study was to explore patterns of parent involvement as perceived by teachers and identify correlates of these patterns. Parent involvement indicators and correlates were selected from a review of existing research. Participants included 34 teachers and 577 children in kindergarten through third grade. The vast majority of the sample was African American (78%), followed by Caucasian (19%) and other ethnic backgrounds (2%). Two subscales from the Parent Involvement-Teacher scale, contact and comfort, were entered as indicators in a latent profile analysis to determine the number and types of parent involvement classes. Contact included the frequency of interactions between parents and teachers; comfort included the quality of their relationship with the parent and how well their goals were aligned. Subsequent latent class regressions were conducted to identify student, school, and family characteristics associated with class membership. Three classes provided the optimal solution. This included two classes of parents with low contact with teachers but different comfort levels; one with low contact and low comfort (11%), and one with low contact but high comfort (71%). The remaining class, representing 18% of parents, was rated high on both contact and comfort. Low income status, family problems, and social, emotional, academic, and self-regulation problems distinguished the low comfort class from the other two classes. It is imperative to help teachers feel more comfortable working with families who may be experiencing substantial stressors and who also have children who need support across school and home settings.

Emission rate and internal quantum efficiency enhancement in different geometrical shapes of GaN LED

NASA Astrophysics Data System (ADS)

Rashid, S.; Wahid, M. H. A.; Hambali, N. A. M. Ahmad; Halim, N. S. A. Abdul; Ramli, M. M.; Shahimin, M. M.

2017-09-01

This work is based on the development of light emitting diode (LED) using different geometry of top surface on GaN p-n junction structure. Three types of LED chips are designed with different top surface to differ whether p-type layer or p contact plays an important role in improving its efficiency. The voltage applied ranges from 0V to 4V. Current-voltage characteristic for all three samples are obtained and analyzed. The results show that dome shaped of p-type layer operating at 4V increases the emission rate and internal quantum efficiency up to 70%, which is two times higher than basic cylindrically LED chip. Moreover, this new design effectively solved the higher forward voltage problem of the usual curve surface of p-contact GaN LED.

Influence of corneal thickness on the intraocular pressure readings for Maklakoff's tonometer of different weight

NASA Astrophysics Data System (ADS)

Franus, D. V.

2018-05-01

Research is conducted into variation in the stress-strain state of the corneoscleral shell of the human eye under loading by a flat base stamp of varying weight. A three-dimensional finite-element model of the contact problem of loading of the corneoscleral shell in the ANSYS program package is presented. Cornea and sclera are modeled as conjugated transversely isotropic spherical shells. The cornea is modeled as a multilayer shell with variable thickness in which all modeled layers have their own individual elastic properties. The research deals with the numerical calculation of the diameter of the contact zone between the shell and the stamp. Values of correction coefficients for intraocular pressure are obtained depending on the thickness of the corneal shell in its center, allowing the true intraocular pressure to be determined more accurately.

Study on photon transport problem based on the platform of molecular optical simulation environment.

PubMed

Peng, Kuan; Gao, Xinbo; Liang, Jimin; Qu, Xiaochao; Ren, Nunu; Chen, Xueli; Ma, Bin; Tian, Jie

2010-01-01

As an important molecular imaging modality, optical imaging has attracted increasing attention in the recent years. Since the physical experiment is usually complicated and expensive, research methods based on simulation platforms have obtained extensive attention. We developed a simulation platform named Molecular Optical Simulation Environment (MOSE) to simulate photon transport in both biological tissues and free space for optical imaging based on noncontact measurement. In this platform, Monte Carlo (MC) method and the hybrid radiosity-radiance theorem are used to simulate photon transport in biological tissues and free space, respectively, so both contact and noncontact measurement modes of optical imaging can be simulated properly. In addition, a parallelization strategy for MC method is employed to improve the computational efficiency. In this paper, we study the photon transport problems in both biological tissues and free space using MOSE. The results are compared with Tracepro, simplified spherical harmonics method (SP(n)), and physical measurement to verify the performance of our study method on both accuracy and efficiency.

Study on Photon Transport Problem Based on the Platform of Molecular Optical Simulation Environment

PubMed Central

Peng, Kuan; Gao, Xinbo; Liang, Jimin; Qu, Xiaochao; Ren, Nunu; Chen, Xueli; Ma, Bin; Tian, Jie

2010-01-01

As an important molecular imaging modality, optical imaging has attracted increasing attention in the recent years. Since the physical experiment is usually complicated and expensive, research methods based on simulation platforms have obtained extensive attention. We developed a simulation platform named Molecular Optical Simulation Environment (MOSE) to simulate photon transport in both biological tissues and free space for optical imaging based on noncontact measurement. In this platform, Monte Carlo (MC) method and the hybrid radiosity-radiance theorem are used to simulate photon transport in biological tissues and free space, respectively, so both contact and noncontact measurement modes of optical imaging can be simulated properly. In addition, a parallelization strategy for MC method is employed to improve the computational efficiency. In this paper, we study the photon transport problems in both biological tissues and free space using MOSE. The results are compared with Tracepro, simplified spherical harmonics method (S P n), and physical measurement to verify the performance of our study method on both accuracy and efficiency. PMID:20445737

Thin film modeling of crystal dissolution and growth in confinement.

PubMed

Gagliardi, Luca; Pierre-Louis, Olivier

2018-01-01

We present a continuum model describing dissolution and growth of a crystal contact confined against a substrate. Diffusion and hydrodynamics in the liquid film separating the crystal and the substrate are modeled within the lubrication approximation. The model also accounts for the disjoining pressure and surface tension. Within this framework, we obtain evolution equations which govern the nonequilibrium dynamics of the crystal interface. Based on this model, we explore the problem of dissolution under an external load, known as pressure solution. We find that in steady state, diverging (power-law) crystal-surface repulsions lead to flat contacts with a monotonic increase of the dissolution rate as a function of the load. Forces induced by viscous dissipation then surpass those due to disjoining pressure at large enough loads. In contrast, finite repulsions (exponential) lead to sharp pointy contacts with a dissolution rate independent of the load and the liquid viscosity. Ultimately, in steady state, the crystal never touches the substrate when pressed against it. This result is independent from the nature of the crystal-surface interaction due to the combined effects of viscosity and surface tension.

Thin film modeling of crystal dissolution and growth in confinement

NASA Astrophysics Data System (ADS)

Gagliardi, Luca; Pierre-Louis, Olivier

2018-01-01

We present a continuum model describing dissolution and growth of a crystal contact confined against a substrate. Diffusion and hydrodynamics in the liquid film separating the crystal and the substrate are modeled within the lubrication approximation. The model also accounts for the disjoining pressure and surface tension. Within this framework, we obtain evolution equations which govern the nonequilibrium dynamics of the crystal interface. Based on this model, we explore the problem of dissolution under an external load, known as pressure solution. We find that in steady state, diverging (power-law) crystal-surface repulsions lead to flat contacts with a monotonic increase of the dissolution rate as a function of the load. Forces induced by viscous dissipation then surpass those due to disjoining pressure at large enough loads. In contrast, finite repulsions (exponential) lead to sharp pointy contacts with a dissolution rate independent of the load and the liquid viscosity. Ultimately, in steady state, the crystal never touches the substrate when pressed against it. This result is independent from the nature of the crystal-surface interaction due to the combined effects of viscosity and surface tension.

Upscaling the diffusion equations in particulate media made of highly conductive particles. II. Application to fibrous materials.

PubMed

Vassal, J-P; Orgéas, L; Favier, D; Auriault, J-L; Le Corre, S

2008-01-01

In paper I [Vassal, Phys. Rev. E77, 011302 (2008)] of this contribution, the effective diffusion properties of particulate media with highly conductive particles and particle-particle interfacial barriers have been investigated with the homogenization method with multiple scale asymptotic expansions. Three different macroscopic models have been proposed depending on the quality of contacts between particles. However, depending on the nature and the geometry of particles contained in representative elementary volumes of the considered media, localization problems to be solved to compute the effective conductivity of the two first models can rapidly become cumbersome, time and memory consuming. In this second paper, the above problem is simplified and applied to networks made of slender, wavy and entangled fibers. For these types of media, discrete formulations of localization problems for all macroscopic models can be obtained leading to very efficient numerical calculations. Semianalytical expressions of the effective conductivity tensors are also proposed under simplifying assumptions. The case of straight monodisperse and homogeneously distributed slender fibers with a circular cross section is further explored. Compact semianalytical and analytical estimations are obtained when fiber-fiber contacts are perfect or very poor. Moreover, two discrete element codes have been developed and used to solve localization problems on representative elementary volumes for the same types of contacts. Numerical results underline the significant roles of the fiber content, the orientation of fibers as well as the relative position and orientation of contacting fibers on the effective conductivity tensors. Semianalytical and analytical predictions are discussed and compared with numerical results.

Management of complications associated with lathe-cut soft contact lenses.

PubMed

Freeman, M I

1979-06-01

At the present time, nine lathe-cut lenses are FDA approved and commercially available in the United States. Complications of lathe-cut soft contact lenses cover a wide spectrum of problems. Five significant complications of lathe-cut lenses and their prevention and therapeutic management are discussed.

Surface density of accumulated electrons on walls in contact with a plasma

NASA Technical Reports Server (NTRS)

De, B. R.

1975-01-01

It is shown that the surface density of accumulated electrons on a wall in contact with a plasma can be expressed as a simple function of the Debye shielding distance in the plasma. The result may have applications to problems involving objects immersed in a space plasma.

X-15 landing on lakebed

NASA Technical Reports Server (NTRS)

1960-01-01

In this 17-second video clip, the X-15 is shown in flight and then landing on Rogers Dry Lakebed adjacent to Edwards Air Force Base. It is followed by an F-104A chase aircraft, whose pilot provided a second set of eyes to the X-15 pilot on landing in case of any problems. The video shows the skids on the back of the X-15 contacting the lakebed, with the aircraft's nose then rotating downward until the nose landing gear was on the lakebed.

Effects of Different Distributions of Training Time on the Acquisition of Contact Flying Skills

DTIC Science & Technology

1981-07-01

evaluate their own performance. PERCEPTION OF TRAINING. Based orn their general response to the Student Opinion Survey, the students in both programs felt...analy- sis. Dr. Jerry M. Childs and Mr. Edward Miller of Seville aided in the devel- oment of the pilot performance measurement instruments. Mr. E. Peter...J. B., Childs , J. M., Prophet, W. W., & Spears, W. L. Human factors problems in general aviation (Tech. Rep. FAA-CT-80-194). Washington, DC: Federal

MEMS-Based Flexible Force Sensor for Tri-Axial Catheter Contact Force Measurement

PubMed Central

Sheng, Jun; Desai, Jaydev P.

2016-01-01

Atrial fibrillation (AFib) is a significant healthcare problem caused by the uneven and rapid discharge of electrical signals from pulmonary veins (PVs). The technique of radiofrequency (RF) ablation can block these abnormal electrical signals by ablating myocardial sleeves inside PVs. Catheter contact force measurement during RF ablation can reduce the rate of AFib recurrence, since it helps to determine effective contact of the catheter with the tissue, thereby resulting in effective power delivery for ablation. This paper presents the development of a three-dimensional (3D) force sensor to provide the real-time measurement of tri-axial catheter contact force. The 3D force sensor consists of a plastic cubic bead and five flexible force sensors. Each flexible force sensor was made of a PEDOT:PSS strain gauge and a PDMS bump on a flexible PDMS substrate. Calibration results show that the fabricated sensor has a linear response in the force range required for RF ablation. To evaluate its working performance, the fabricated sensor was pressed against gelatin tissue by a micromanipulator and also integrated on a catheter tip to test it within deionized water flow. Both experiments simulated the ventricular environment and proved the validity of applying the 3D force sensor in RF ablation. PMID:28190945

Hybrid Nanostructured Textile Bioelectrode for Unobtrusive Health Monitoring

NASA Astrophysics Data System (ADS)

Rai, Pratyush

Coronary heart disease, cardiovascular diseases and strokes are the leading causes of mortality in United States of America. Timely point-of-care health diagnostics and therapeutics for person suffering from these diseases can save thousands of lives. However, lack of accessible minimally intrusive health monitoring systems makes timely diagnosis difficult and sometimes impossible. To remedy this problem, a textile based nano-bio-sensor was developed and evaluated in this research. The sensor was made of novel array of vertically standing nanostructures that are conductive nano-fibers projecting from a conductive fabric. These sensor electrodes were tested for the quality of electrical contact that they made with the skin based on the fundamental skin impedance model and electromagnetic theory. The hybrid nanostructured dry electrodes provided large surface area and better contact with skin that improved electrode sensitivity and reduced the effect of changing skin properties, which are the problems usually faced by conventional dry textile electrodes. The dry electrodes can only register strong physiological signals because of high background noise levels, thus limiting the use of existing dry electrodes to heart rate measurement and respiration. Therefore, dry electrode systems cannot be used for recording complete ECG waveform, EEG or measurement of bioimpedance. Because of their improved sensitivity these hybrid nanostructured dry electrodes can be applied to measurement of ECG and bioimpedance with very low baseline noise. These textile based electrodes can be seamlessly integrated into garments of daily use such as vests and bra. In combination with embedded wireless network device that can communicate with smart phone, laptop or GPRS, they can function as wearable wireless health diagnostic systems.

Accounting for Ethnicity-Related Differences in Ocular Surface Integrity as a Step Toward Understanding Contact Lens Discomfort.

PubMed

Chan, Stefanie M; Svitova, Tatyana F; Lin, Meng C

2017-01-01

Contact lens discomfort is a common problem that can lead to unsuccessful or limited contact lens wear. Although many factors may contribute to contact lens discomfort, limited research has explored the influence of ethnicity-related differences in the anatomy and physiology of the ocular surface. Therefore, we performed a search of the literature in PubMed using key words related to "ocular surface" paired with the terms "race" and "ethnicity." The goal of this review was to determine potential areas of research regarding ethnicity differences, particularly between Asian and non-Asian eyes, in ocular surface integrity to advance our understanding of contact lens discomfort.

The differential relationship between mental contamination and the core dimensions of contact contamination fear.

PubMed

Melli, Gabriele; Bulli, Francesco; Carraresi, Claudia; Tarantino, Federica; Gelli, Simona; Poli, Andrea

2017-01-01

Two types of contamination fear are recognized: contact and mental contamination. Contact contamination appears to be motivated both by harm avoidance and disgust avoidance. This study aimed to examine the relationships between disgust propensity, mental contamination and contact contamination while differentiating between harm avoidance and disgust avoidance in contact contamination. 169 OCD patients completed a set of questionnaires assessing mental contamination, contact contamination, disgust propensity, OCD, anxiety and depression. 1) Contact contamination based on disgust avoidance was more strongly associated with mental contamination and disgust propensity than contact contamination based on harm avoidance; 2) mental contamination significantly predicted contact contamination based on disgust avoidance, while it did not predict contact contamination based on harm avoidance; 3) mental contamination had a significant mediational role in the relationship between disgust propensity and contact contamination motivated by disgust avoidance. Mental contamination plays a role in contact contamination fear when disgust is primarily experienced. Copyright © 2016 Elsevier Ltd. All rights reserved.

Pore-scale modeling of moving contact line problems in immiscible two-phase flow

NASA Astrophysics Data System (ADS)

Kucala, Alec; Noble, David; Martinez, Mario

2016-11-01

Accurate modeling of moving contact line (MCL) problems is imperative in predicting capillary pressure vs. saturation curves, permeability, and preferential flow paths for a variety of applications, including geological carbon storage (GCS) and enhanced oil recovery (EOR). Here, we present a model for the moving contact line using pore-scale computational fluid dynamics (CFD) which solves the full, time-dependent Navier-Stokes equations using the Galerkin finite-element method. The MCL is modeled as a surface traction force proportional to the surface tension, dependent on the static properties of the immiscible fluid/solid system. We present a variety of verification test cases for simple two- and three-dimensional geometries to validate the current model, including threshold pressure predictions in flows through pore-throats for a variety of wetting angles. Simulations involving more complex geometries are also presented to be used in future simulations for GCS and EOR problems. Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

Development of low cost contacts to silicon solar cells

NASA Technical Reports Server (NTRS)

Tanner, D. P.

1980-01-01

The results of the second phase of the program of developing low cost contacts to silicon solar cells using copper are presented. Phase 1 yielded the development of a plated Pd-Cr-Cu contact system. This process produced cells with shunting problems when they were heated to 400 C for 5 minutes. Means of stopping the identified copper diffusion which caused the shunting were investigated. A contact heat treatment study was conducted with Pd-Ag, Ci-Ag, Pd-Cu, Cu-Cr, and Ci-Ni-Cu. Nickel is shown to be an effective diffusion barrier to copper.

Motion-compensated detection of heart rate based on the time registration adaptive filter

NASA Astrophysics Data System (ADS)

Yang, Lei; Zhou, Jinsong; Jing, Juanjuan; Li, Yacan; Wei, Lidong; Feng, Lei; He, Xiaoying; Bu, Meixia; Fu, Xilu

2018-01-01

A non-contact heart rate detection method based on the dual-wavelength technique is proposed and demonstrated experimentally. The heart rate is obtained based on the PhotoPlethysmoGraphy (PPG). Each detection module uses the reflection detection probe which is composed of the LED and the photodiode. It is a well-known fact that the differences in the circuits of two detection modules result in different responses of two modules for motion artifacts. It will cause a time delay between the two signals. This poses a great challenge to compensate the motion artifacts during measurements. In order to solve this problem, we have firstly used the time registration and translated the signals to ensure that the two signals are consistent in time domain. Then the adaptive filter is used to compensate the motion artifacts. Moreover, the data obtained by using this non-contact detection system is compared with those of the conventional finger blood volume pulse (BVP) sensor by simultaneously measuring the heart rate of the subject. During the experiment, the left hand remains stationary and is detected by a conventional finger BVP sensor. Meanwhile, the moving palm of right hand is detected by the proposed system. The data obtained from the proposed non-contact system are consistent and comparable with that of the BVP sensor. This method can effectively suppress the interference caused by the two circuit differences and successfully compensate the motion artifacts. This technology can be used in medical and daily heart rate measurement.

Fiber-optical method of pyrometric measurement of melts temperature

NASA Astrophysics Data System (ADS)

Zakharenko, V. A.; Veprikova, Ya R.

2018-01-01

There is a scientific problem of non-contact measurement of the temperature of metal melts now. The problem is related to the need to achieve the specified measurement errors in conditions of uncertainty of the blackness coefficients of the radiating surfaces. The aim of this work is to substantiate the new method of measurement in which the influence of the blackness coefficient is eliminated. The task consisted in calculating the design and material of special crucible placed in the molten metal, which is an emitter in the form of blackbody (BB). The methods are based on the classical concepts of thermal radiation and calculations based on the Planck function. To solve the problem, the geometry of the crucible was calculated on the basis of the Goofy method which forms the emitter of a blackbody at the immersed in the melt. The paper describes the pyrometric device based on fiber optic pyrometer for temperature measurement of melts, which implements the proposed method of measurement using a special crucible. The emitter is formed by the melt in this crucible, the temperature within which is measured by means of fiber optic pyrometer. Based on the results of experimental studies, the radiation coefficient ε‧ > 0.999, which confirms the theoretical and computational justification is given in the article

Predictive Simulations of Neuromuscular Coordination and Joint-Contact Loading in Human Gait.

PubMed

Lin, Yi-Chung; Walter, Jonathan P; Pandy, Marcus G

2018-04-18

We implemented direct collocation on a full-body neuromusculoskeletal model to calculate muscle forces, ground reaction forces and knee contact loading simultaneously for one cycle of human gait. A data-tracking collocation problem was solved for walking at the normal speed to establish the practicality of incorporating a 3D model of articular contact and a model of foot-ground interaction explicitly in a dynamic optimization simulation. The data-tracking solution then was used as an initial guess to solve predictive collocation problems, where novel patterns of movement were generated for walking at slow and fast speeds, independent of experimental data. The data-tracking solutions accurately reproduced joint motion, ground forces and knee contact loads measured for two total knee arthroplasty patients walking at their preferred speeds. RMS errors in joint kinematics were < 2.0° for rotations and < 0.3 cm for translations while errors in the model-computed ground-reaction and knee-contact forces were < 0.07 BW and < 0.4 BW, respectively. The predictive solutions were also consistent with joint kinematics, ground forces, knee contact loads and muscle activation patterns measured for slow and fast walking. The results demonstrate the feasibility of performing computationally-efficient, predictive, dynamic optimization simulations of movement using full-body, muscle-actuated models with realistic representations of joint function.

An inverse model for a free-boundary problem with a contact line: Steady case

DOE Office of Scientific and Technical Information (OSTI.GOV)

Volkov, Oleg; Protas, Bartosz

2009-07-20

This paper reformulates the two-phase solidification problem (i.e., the Stefan problem) as an inverse problem in which a cost functional is minimized with respect to the position of the interface and subject to PDE constraints. An advantage of this formulation is that it allows for a thermodynamically consistent treatment of the interface conditions in the presence of a contact point involving a third phase. It is argued that such an approach in fact represents a closure model for the original system and some of its key properties are investigated. We describe an efficient iterative solution method for the Stefan problemmore » formulated in this way which uses shape differentiation and adjoint equations to determine the gradient of the cost functional. Performance of the proposed approach is illustrated with sample computations concerning 2D steady solidification phenomena.« less

Parallel Simulation of Three-Dimensional Free Surface Fluid Flow Problems

DOE Office of Scientific and Technical Information (OSTI.GOV)

BAER,THOMAS A.; SACKINGER,PHILIP A.; SUBIA,SAMUEL R.

1999-10-14

Simulation of viscous three-dimensional fluid flow typically involves a large number of unknowns. When free surfaces are included, the number of unknowns increases dramatically. Consequently, this class of problem is an obvious application of parallel high performance computing. We describe parallel computation of viscous, incompressible, free surface, Newtonian fluid flow problems that include dynamic contact fines. The Galerkin finite element method was used to discretize the fully-coupled governing conservation equations and a ''pseudo-solid'' mesh mapping approach was used to determine the shape of the free surface. In this approach, the finite element mesh is allowed to deform to satisfy quasi-staticmore » solid mechanics equations subject to geometric or kinematic constraints on the boundaries. As a result, nodal displacements must be included in the set of unknowns. Other issues discussed are the proper constraints appearing along the dynamic contact line in three dimensions. Issues affecting efficient parallel simulations include problem decomposition to equally distribute computational work among a SPMD computer and determination of robust, scalable preconditioners for the distributed matrix systems that must be solved. Solution continuation strategies important for serial simulations have an enhanced relevance in a parallel coquting environment due to the difficulty of solving large scale systems. Parallel computations will be demonstrated on an example taken from the coating flow industry: flow in the vicinity of a slot coater edge. This is a three dimensional free surface problem possessing a contact line that advances at the web speed in one region but transitions to static behavior in another region. As such, a significant fraction of the computational time is devoted to processing boundary data. Discussion focuses on parallel speed ups for fixed problem size, a class of problems of immediate practical importance.« less

Prioritized Contact Transport Stream

NASA Technical Reports Server (NTRS)

Hunt, Walter Lee, Jr. (Inventor)

2015-01-01

A detection process, contact recognition process, classification process, and identification process are applied to raw sensor data to produce an identified contact record set containing one or more identified contact records. A prioritization process is applied to the identified contact record set to assign a contact priority to each contact record in the identified contact record set. Data are removed from the contact records in the identified contact record set based on the contact priorities assigned to those contact records. A first contact stream is produced from the resulting contact records. The first contact stream is streamed in a contact transport stream. The contact transport stream may include and stream additional contact streams. The contact transport stream may be varied dynamically over time based on parameters such as available bandwidth, contact priority, presence/absence of contacts, system state, and configuration parameters.

[Eye contact in adult patients with Asperger syndrome].

PubMed

Roy, M; Wolfgang, D

2015-05-01

It is unclear if individuals with autism spectrum disorders rarely hold direct eye contact because eyes are unimportant for them, or if it is actively avoided. The aim of the current investigation was to gain a better understanding for their views on direct eye contact by exploring adult patients with Asperger syndrome. 63 adult patients with Asperger syndrome (28 females, 35 males, 21 - 62 years old) were explored about using and sensing direct eye contact by means of a standardised questionnaire. 87 % of investigated patients depict direct eye contact as being disagreeable. They describe it as arduous and distracting. Therefore they mostly actively avoid direct eye contact. The here gained knowledge about aversion towards direct eye contact in individuals with autism should lead to a stronger understanding and acceptance of this problem in the non-autistic population. © Georg Thieme Verlag KG Stuttgart · New York.

Specific minor groove solvation is a crucial determinant of DNA binding site recognition

PubMed Central

Harris, Lydia-Ann; Williams, Loren Dean; Koudelka, Gerald B.

2014-01-01

The DNA sequence preferences of nearly all sequence specific DNA binding proteins are influenced by the identities of bases that are not directly contacted by protein. Discrimination between non-contacted base sequences is commonly based on the differential abilities of DNA sequences to allow narrowing of the DNA minor groove. However, the factors that govern the propensity of minor groove narrowing are not completely understood. Here we show that the differential abilities of various DNA sequences to support formation of a highly ordered and stable minor groove solvation network are a key determinant of non-contacted base recognition by a sequence-specific binding protein. In addition, disrupting the solvent network in the non-contacted region of the binding site alters the protein's ability to recognize contacted base sequences at positions 5–6 bases away. This observation suggests that DNA solvent interactions link contacted and non-contacted base recognition by the protein. PMID:25429976

Effects of contact network structure on epidemic transmission trees: implications for data required to estimate network structure.

PubMed

Carnegie, Nicole Bohme

2018-01-30

Understanding the dynamics of disease spread is key to developing effective interventions to control or prevent an epidemic. The structure of the network of contacts over which the disease spreads has been shown to have a strong influence on the outcome of the epidemic, but an open question remains as to whether it is possible to estimate contact network features from data collected in an epidemic. The approach taken in this paper is to examine the distributions of epidemic outcomes arising from epidemics on networks with particular structural features to assess whether that structure could be measured from epidemic data and what other constraints might be needed to make the problem identifiable. To this end, we vary the network size, mean degree, and transmissibility of the pathogen, as well as the network feature of interest: clustering, degree assortativity, or attribute-based preferential mixing. We record several standard measures of the size and spread of the epidemic, as well as measures that describe the shape of the transmission tree in order to ascertain whether there are detectable signals in the final data from the outbreak. The results suggest that there is potential to estimate contact network features from transmission trees or pure epidemic data, particularly for diseases with high transmissibility or for which the relevant contact network is of low mean degree. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

Effect of deformation on the thermal conductivity of granular porous media with rough grain surface

NASA Astrophysics Data System (ADS)

Askari, Roohollah; Hejazi, S. Hossein; Sahimi, Muhammad

2017-08-01

Heat transfer in granular porous media is an important phenomenon that is relevant to a wide variety of problems, including geothermal reservoirs and enhanced oil recovery by thermal methods. Resistance to flow of heat in the contact area between the grains strongly influences the effective thermal conductivity of such porous media. Extensive experiments have indicated that the roughness of the grains' surface follows self-affine fractal stochastic functions, and thus, the contact resistance cannot be accounted for by models based on smooth surfaces. Despite the significance of rough contact area, the resistance has been accounted for by a fitting parameter in the models of heat transfer. In this Letter we report on a study of conduction in a packing of particles that contains a fluid of a given conductivity, with each grain having a rough self-affine surface, and is under an external compressive pressure. The deformation of the contact area depends on the fractal dimension that characterizes the grains' rough surface, as well as their Young's modulus. Excellent qualitative agreement is obtained with experimental data. Deformation of granular porous media with grains that have rough self-affine fractal surface is simulated. Thermal contact resistance between grains with rough surfaces is incorporated into the numerical simulation of heat conduction under compressive pressure. By increasing compressive pressure, thermal conductivity is enhanced more in the grains with smoother surfaces and lower Young's modulus. Excellent qualitative agreement is obtained with the experimental data.

Povidone-iodine induced post-surgical irritant contact dermatitis localized outside of the surgical incision area. Report of 27 cases and a literature review.

PubMed

Borrego, Leopoldo; Hernández, Noelia; Hernández, Zaida; Peñate, Yeray

2016-05-01

Povidone-iodine solution is an antiseptic that is used worldwide as surgical paint and is considered to have a low irritant potential. Post-surgical severe irritant dermatitis has been described after the misuse of this antiseptic in the surgical setting. Between January 2011 and June 2013, 27 consecutive patients with post-surgical contact dermatitis localized outside of the surgical incision area were evaluated. Thirteen patients were also available for patch testing. All patients developed dermatitis the day after the surgical procedure. Povidone-iodine solution was the only liquid in contact with the skin of our patients. Most typical lesions were distributed in a double lumbar parallel pattern, but they were also found in a random pattern or in areas where a protective pad or an occlusive medical device was glued to the skin. The patch test results with povidone-iodine were negative. Povidone-iodine-induced post-surgical dermatitis may be a severe complication after prolonged surgical procedures. As stated in the literature and based on the observation that povidone-iodine-induced contact irritant dermatitis occurred in areas of pooling or occlusion, we speculate that povidone-iodine together with occlusion were the causes of the dermatitis epidemic that occurred in our surgical setting. Povidone-iodine dermatitis is a problem that is easily preventable through the implementation of minimal routine changes to adequately dry the solution in contact with the skin. © 2015 The International Society of Dermatology.

Effectiveness of Sweden's Contact Family/Person Program for Older Children

ERIC Educational Resources Information Center

Brännström, Lars; Vinnerljung, Bo; Hjern, Anders

2015-01-01

Objectives: To estimate the impacts of Sweden's Contact Family/Person Program (CFPP) for older children on participants' long-term outcomes related to mental health problems, illicit drug use, public welfare receipt, placement in out-of-home care, educational achievement, and offending. Method: We analyzed longitudinal register data on more than…

Students with No-Contact Orders against Abusive Classmates: Recommendations for Educators

ERIC Educational Resources Information Center

Mayes, Thomas A.

2008-01-01

Teen dating violence is a common and often overlooked problem in schools. The consequences of teen dating violence often include decreased academic achievement and increased risk for school failure. The law may provide relief for targets of teen dating violence, including granting orders of protection (no-contact orders) against their…

Rain Premature Susceptibility Study on the Proposed Piezoelectric Contact Fuze System for Triggering the MC-132 in the TX-5X1 Weapon

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wehrle, R.D.

1953-06-18

The probability of the occurrence of rain during the "armed" portion of the fall of a bomb is approximately 1/25. Therefore, rain is considered a problem in premature detonation of the warhead through activation of the contact fuze system.

Evaporation of liquid droplets on solid substrates. I. Flat substrate with pinned or moving contact line

NASA Astrophysics Data System (ADS)

Amini, Amirhossein; Homsy, G. M.

2017-04-01

We study the evolution of the profile of a two-dimensional volatile liquid droplet that is evaporating on a flat heated substrate. We adopt a one-sided model with thermal control that, together with the lubrication approximation, results in an evolution equation for the local height of the droplet. Without requiring any presumption for the shape of the drop, the problem is formulated for the two modes of evaporation: a pinned contact line and a moving contact line with fixed contact angle. Numerical solutions are provided for each case. For the pinned contact line case, we observe that after a time interval the contact angle dynamics become nonlinear and, interestingly, the local contact angle goes to zero in advance of total evaporation of the drop. For the case of a moving contact line, in which the singularity at the contact line is treated by a numerical slip model, we find that the droplet nearly keeps its initial circular shape and that the contact line recedes with constant speed.

Surface wettability enhancement of silicone hydrogel lenses by processing with polar plastic molds.

PubMed

Lai, Y C; Friends, G D

1997-06-05

In the quest for hydrogel contact lenses with improved extended wear capability, the use of siloxane moieties in the lens materials was investigated. However, the introduction of hydrophobic siloxane groups gave rise to wettability and lipidlike deposit problems. It was found that when polysiloxane-based compositions for hydrogels were processed with polar plastic molds, such as those fabricated from an acrylonitrile-based polymer, the hydrogel lenses fabricated were wettable, with minimized lipidlike deposits. These findings were supported by the wettability of silicone hydrogel films, silicon, and nitrogen element contents near lens surfaces, as well as the results from clinical assessment of silicone hydrogel lenses.

Kangaroo mother care may help oral growth and development in premature infants.

PubMed

Zhang, Feng; Liu, Shoutao

2012-08-01

Premature infants have a shorter prenatal development period and are prone to many serious medical problems during neonatal period. This may impact the development of oral tissues, as manifested by enamel hypoplasia, palatal distortion, malocclusion, or delay in tooth eruption and maturation. Kangaroo mother care (KMC) is a standardized and protocol-based care system for premature infants, based on skin-to-skin contact between the infant and their mother. Kangaroo mother care has been demonstrated to greatly improve the nurturing of premature infants and comparatively reduce the risk factors of oral defects. We hypothesize that KMC also facilitates oral growth and development in premature infants.

Biomedical research and aerospace technology applications

NASA Technical Reports Server (NTRS)

1971-01-01

The accomplishments and activities of an Applications Team for biomedical subjects are presented. The team attempts to couple the technological problems and requirements in medicine with the relevant aerospace technology and, in particular, NASA-generated technology. The team actively engages in identifying these problems through direct contact with medical staffs or problem originators. The identification and specification of medical problems is followed by a search for technology which may be relevant to solutions to these problems.

Prediction of bead area contact load at the tire-wheel interface using NASTRAN

NASA Technical Reports Server (NTRS)

Chen, C. H. S.

1982-01-01

The theoretical prediction of the bead area contact load at the tire wheel interface using NASTRAN is reported. The application of the linear code to a basically nonlinear problem results in excessive deformation of the structure and the tire-wheel contact conditions become impossible to achieve. A psuedo-nonlinear approach was adopted in which the moduli of the cord reinforced composite are increased so that the computed key deformations matched that of the experiment. Numerical results presented are discussed.

Reducing Stigma in Media Professionals: Is there Room for Improvement? Results from a Systematic Review.

PubMed

Maiorano, Alessandra; Lasalvia, Antonio; Sampogna, Gaia; Pocai, Benedetta; Ruggeri, Mirella; Henderson, Claire

2017-10-01

The mass media may increase stigma against people with mental health problems by reinforcing common stereotypes. Media professionals thus represent a target group for antistigma interventions. This paper aims to review available literature on antistigma interventions for mass media professionals, seeking to clarify what kind of interventions have been found to be effective in reducing mental health stigma among mass media professionals. Six electronic databases (MEDLINE, PsycINFO, Embase, Cochrane Reviews Library and Cochrane Central Register of Controlled Trials, Web of Science, and Applied Social Sciences Index & Abstracts) were systematically searched through March 2017 for studies addressing antistigma interventions on mass media professionals.  Results: A total of 27 studies on antistigma interventions targeted to media professionals were found. Reviewed articles were classified into 3 categories: media-monitoring projects/reporting guidelines ( n = 23), interventions for educating journalists ( n = 2), and interventions for educating journalism students ( n = 2). Overall, antistigma interventions for media professionals seem to have some effect in improving reporting style, thus providing a more balanced portrayal of people with mental health problems: the most promising interventions are contact-based educational approaches and the provision of guidelines by authoritative institutions. It should be useful to promote and disseminate contact-based educational interventions targeted to journalists and to include specific modules on mental health topics in the training curricula of journalism students. However, as research in the field suffers from several limitations, high-quality studies exploring the long-term effect of antistigma interventions for media professionals are needed.

Pediatric Baseline Patch Test Series: Initial Findings of the Pediatric Contact Dermatitis Workgroup.

PubMed

Yu, JiaDe; Atwater, Amber Reck; Brod, Bruce; Chen, Jennifer K; Chisolm, Sarah S; Cohen, David E; de la Feld, Salma; Gaspari, Anthony A; Martin, Kari Lyn; Montanez-Wiscovich, Marjorie; Sheehan, Michael; Silverberg, Nanette; Lugo-Somolinos, Aida; Thakur, Binod K; Watsky, Kalman; Jacob, Sharon E

2018-06-21

Allergic contact dermatitis is a challenging diagnostic problem in children. Although epicutaneous patch testing is the diagnostic standard for confirmation of contact sensitization, it is less used in children by dermatologists treating children, pediatric dermatologists, and pediatricians, when compared with adult practitioners. The aim of the study was to create and evaluate standardization of a pediatric patch test series for children older than 6 years. We surveyed dermatologists and allergists conducting epicutaneous patch testing in children attending the 2017 American Contact Dermatitis Society meeting held in Washington, DC. This was followed by discussion of collected data and consensus review by a pediatric contact dermatitis working group at the conference. A baseline pediatric patch test panel was established through working group consensus.

Inferring a District-Based Hierarchical Structure of Social Contacts from Census Data

PubMed Central

Yu, Zhiwen; Liu, Jiming; Zhu, Xianjun

2015-01-01

Researchers have recently paid attention to social contact patterns among individuals due to their useful applications in such areas as epidemic evaluation and control, public health decisions, chronic disease research and social network research. Although some studies have estimated social contact patterns from social networks and surveys, few have considered how to infer the hierarchical structure of social contacts directly from census data. In this paper, we focus on inferring an individual’s social contact patterns from detailed census data, and generate various types of social contact patterns such as hierarchical-district-structure-based, cross-district and age-district-based patterns. We evaluate newly generated contact patterns derived from detailed 2011 Hong Kong census data by incorporating them into a model and simulation of the 2009 Hong Kong H1N1 epidemic. We then compare the newly generated social contact patterns with the mixing patterns that are often used in the literature, and draw the following conclusions. First, the generation of social contact patterns based on a hierarchical district structure allows for simulations at different district levels. Second, the newly generated social contact patterns reflect individuals social contacts. Third, the newly generated social contact patterns improve the accuracy of the SEIR-based epidemic model. PMID:25679787

Rock shape, restitution coefficients and rockfall trajectory modelling

NASA Astrophysics Data System (ADS)

Glover, James; Christen, Marc; Bühler, Yves; Bartelt, Perry

2014-05-01

Restitution coefficients are used in rockfall trajectory modelling to describe the ratio between incident and rebound velocities during ground impact. They are central to the problem of rockfall hazard analysis as they link rock mass characteristics to terrain properties. Using laboratory experiments as a guide, we first show that restitution coefficients exhibit a wide range of scatter, although the material properties of the rock and ground are constant. This leads us to the conclusion that restitution coefficients are poor descriptors of rock-ground interaction. The primary problem is that "apparent" restitution coefficients are applied at the rock's centre-of-mass and do not account for rock shape. An accurate description of the rock-ground interaction requires the contact forces to be applied at the rock surface with consideration of the momentary rock position and spin. This leads to a variety of rock motions including bouncing, sliding, skipping and rolling. Depending on the impact configuration a wide range of motions is possible. This explains the large scatter of apparent restitution coefficients. We present a rockfall model based on newly developed hard-contact algorithms which includes the effects of rock shape and therefore is able to reproduce the results of different impact configurations. We simulate the laboratory experiments to show that it is possible to reproduce run-out and dispersion of different rock shapes using parameters obtained from independent tests. Although this is a step forward in rockfall trajectory modelling, the problem of parametersing real terrain remains.

On the numerical solution of the dynamically loaded hydrodynamic lubrication of the point contact problem

NASA Technical Reports Server (NTRS)

Lim, Sang G.; Brewe, David E.; Prahl, Joseph M.

1990-01-01

The transient analysis of hydrodynamic lubrication of a point-contact is presented. A body-fitted coordinate system is introduced to transform the physical domain to a rectangular computational domain, enabling the use of the Newton-Raphson method for determining pressures and locating the cavitation boundary, where the Reynolds boundary condition is specified. In order to obtain the transient solution, an explicit Euler method is used to effect a time march. The transient dynamic load is a sinusoidal function of time with frequency, fractional loading, and mean load as parameters. Results include the variation of the minimum film thickness and phase-lag with time as functions of excitation frequency. The results are compared with the analytic solution to the transient step bearing problem with the same dynamic loading function. The similarities of the results suggest an approximate model of the point contact minimum film thickness solution.

Measuring the thermal conductivity of individual carbon nanotubes by the Raman shift method.

PubMed

Li, Qingwei; Liu, Changhong; Wang, Xueshen; Fan, Shoushan

2009-04-08

The thermal contact resistance is a difficult problem that has puzzled many researchers in measuring the intrinsic thermal conductivity of an individual carbon nanotube (CNT). To avoid this problem, a non-contact Raman spectra shift method is introduced, by which we have successfully measured the thermal conductivity (kappa) of an individual single-walled carbon nanotube and a multi-walled carbon nanotube. The measured kappa values are 2400 W m(-1) K(-1) and 1400 W m(-1) K(-1), respectively. The CNT was suspended over a trench and heated by electricity. The temperature difference between the middle and the two ends of the CNT indicated its intrinsic heat transfer capability. The temperature difference was determined by the temperature-induced shifts of its G band Raman spectra. This new method can eliminate the impact of the thermal contact resistance which was a Gordian knot in many previous measurements.

Tan's contact and the phase distribution of repulsive Fermi gases: Insights from quantum chromodynamics noise analyses

NASA Astrophysics Data System (ADS)

Porter, William J.; Drut, Joaquín E.

2017-05-01

Path-integral analyses originally pioneered in the study of the complex-phase problem afflicting lattice calculations of finite-density quantum chromodynamics are generalized to nonrelativistic Fermi gases with repulsive interactions. Using arguments similar to those previously applied to relativistic theories, we show that the analogous problem in nonrelativistic systems manifests itself naturally in Tan's contact as a nontrivial cancellation between terms with varied dependence on extensive thermodynamic quantities. We analyze that case under the assumption of a Gaussian phase distribution, which is supported by our Monte Carlo calculations and perturbative considerations. We further generalize these results to observables other than the contact, as well as to polarized systems and systems with fixed particle number. Our results are quite general in that they apply to repulsive multicomponent fermions, they are independent of dimensionality or trapping potential, and they hold in the ground state as well as at finite temperature.

Prevalence of ocular surface symptoms, signs, and uncomfortable hours of wear in contact lens wearers: the effect of refitting with daily-wear silicone hydrogel lenses (senofilcon a).

PubMed

Riley, Colleen; Young, Graeme; Chalmers, Robin

2006-12-01

Many soft contact lens wearers have symptoms or signs that compromise successful lens wear. This study estimated the prevalence of problems in current wearers of soft contact lenses and tested the effect of refitting patients with senofilcon A silicone hydrogel lenses (ACUVUE Oasys). Prevalence was estimated from 1,092 current lens wearers for frequent or constant discomfort or dryness, at least 2 hours of uncomfortable wear, at least grade 2 limbal or bulbar hyperemia (0-4), or at least grade 3 corneal staining (0-15). In the second part of the study, 112 of the 564 wearers classified as problem patients were refitted with senofilcon A lenses and reassessed 2 weeks later. Fifty-two percent (564 of 1,092) had some qualifying criteria, with dryness reported by 23%, discomfort by 13%, and at least 2 hours of uncomfortable wear by 27%. Six percent of subjects had qualifying limbal hyperemia; 10% had bulbar hyperemia; and 12% had corneal staining. After refitting 112 problem patients, 75% had less dryness; 88% had better comfort (P<0.0001 each); and 76% had fewer uncomfortable hours of wear (P=0.004). Although the average wearing time was unchanged, comfortable wearing time increased significantly (10.4 to 11.6 hours) (P=0.004). All (35 of 35) eyes with qualifying limbal hyperemia before the refit also improved (P<0.0001), as did 80% (40 of 50) of those with bulbar hyperemia (P<0.0001) and 76% (26 of 34) of those with corneal staining (P=0.005). Most soft lens wearers encounter clinically significant signs or symptoms with their current contact lenses. Refitting with new-generation silicone hydrogel lenses (senofilcon A) can alleviate some of these common problems.

Pore-scale modeling of moving contact line problems in immiscible two-phase flow.

NASA Astrophysics Data System (ADS)

Kucala, A.; Noble, D.; Martinez, M. J.

2016-12-01

Two immiscible fluids in static equilibrium form a common interface along a solid surface, characterized as the static contact (wetting) angle and is a function of surface geometry, intermolecular forces, and interfacial surface energies manifested as interfacial tension. This static configuration may become perturbed due to external force imbalances (mass injection, pressure gradients, buoyancy, etc.) and the contact line location and interface curvature becomes dynamic. Accurate modeling of moving contact line (MCL) problems is imperative in predicting capillary pressure vs. saturation curves, permeability, and preferential flow paths for a variety of applications, including geological carbon storage (GCS) and enhanced oil recovery (EOR). Here, we present a model for the moving contact line using pore-scale computational fluid dynamics (CFD) which solves the full, time-dependent Navier-Stokes equations using the Galerkin finite-element method. The MCL is modeled as a surface traction force proportional to the surface tension, dependent on the static properties of the immiscible fluid/solid system. The moving two-phase interface is tracked using the level set method and discretized with the conformal decomposition finite element method (CDFEM), allowing for surface tension effects to be computed at the exact interface location. We present a variety of verification test cases for simple two- and three-dimensional geometries to validate the current model, including threshold pressure predictions in flows through pore-throats for a variety of wetting angles. Simulations involving more complex geometries are also presented to be used in future simulations for GCS and EOR problems. Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000

Fabrication of hydrophobic structures on coronary stent surface based on direct three-beam laser interference lithography

NASA Astrophysics Data System (ADS)

Gao, Long-yue; Zhou, Wei-qi; Wang, Yuan-bo; Wang, Si-qi; Bai, Chong; Li, Shi-ming; Liu, Bin; Wang, Jun-nan; Cui, Cheng-kun; Li, Yong-liang

2016-05-01

To solve the problems with coronary stent implantation, coronary artery stent surface was directly modified by three-beam laser interference lithography through imitating the water-repellent surface of lotus leaf, and uniform micro-nano structures with the controllable period were fabricated. The morphological properties and contact angle (CA) of the microstructure were measured by scanning electron microscope (SEM) and CA system. The water repellency of stent was also evaluated by the contact and then separation between the water drop and the stent. The results show that the close-packed concave structure with the period of about 12 μm can be fabricated on the stent surface with special parameters (incident angle of 3°, laser energy density of 2.2 J·cm-2 and exposure time of 80 s) by using the three-beam laser at 1 064 nm, and the structure has good water repellency with CA of 120°.

Infrared Fiber Radiometer For Thermometry In Electromagnetic Induced Therapeutic Healing

NASA Astrophysics Data System (ADS)

Katzir, A.; Bowman, F.; Asfour, Y.; Zur, A.; Valeri, C. R.

1988-06-01

Hypothermia is a condition which results from prolonged exposure to a cold environment. Rapid and efficient heating is needed to rewarm the patient from 32-35°C to normal body temperature. Hyperthermia in cancer treatment involves heating malignant tumors to 42.5-43.0°C for an extended period (e.g. 30 min.) in an attempt to obtain remission. Microwave or radio frequency heating is often used for rewarming in hypothermia or for temperature elevation in hyperthermia treatment. One severe problem with such heating is the accurate measurement and control of temperature in the presence of a strong electro-magnetic field. For this purpose we have developed a fiberoptic radiometer system which is based on a non-metallic, infrared fiber probe, which can operate either in contact or in non-contact modes. In preliminary investigations the radiometer worked well in a strong microwave or radiofrequency field, with an accuracy of ±0.5°C.

Transmission Scheduling and Routing Algorithms for Delay Tolerant Networks

NASA Technical Reports Server (NTRS)

Dudukovich, Rachel; Raible, Daniel E.

2016-01-01

The challenges of data processing, transmission scheduling and routing within a space network present a multi-criteria optimization problem. Long delays, intermittent connectivity, asymmetric data rates and potentially high error rates make traditional networking approaches unsuitable. The delay tolerant networking architecture and protocols attempt to mitigate many of these issues, yet transmission scheduling is largely manually configured and routes are determined by a static contact routing graph. A high level of variability exists among the requirements and environmental characteristics of different missions, some of which may allow for the use of more opportunistic routing methods. In all cases, resource allocation and constraints must be balanced with the optimization of data throughput and quality of service. Much work has been done researching routing techniques for terrestrial-based challenged networks in an attempt to optimize contact opportunities and resource usage. This paper examines several popular methods to determine their potential applicability to space networks.

Contact in an Expanding Universe: An Instructive Exercise in Dynamic Geometry

ERIC Educational Resources Information Center

Zimmerman, Seth

2010-01-01

The particular problem solved in this paper is that of calculating the time required to overtake a distant object receding under cosmic expansion, and the speed at which that object is passed. This is a rarely investigated problem leading to some interesting apparent paradoxes. We employ the problem to promote a deeper understanding of the dynamic…

Risk of suicide according to the level of psychiatric contact in the older people: Analysis of national health insurance databases in Taiwan.

PubMed

Yeh, Shin-Ting; Ng, Yee-Yung; Wu, Shiao-Chi

2017-04-01

Suicide in the older people is a serious problem worldwide; however the effect of psychiatric contact on the risk of suicide has not been fully explored. The aim of this study was to investigate the relationship between psychiatric contact and suicide in the older people in Taiwan. A population-based database was used in this national case-control study. Propensity score matching was used to match older people who did and did not commit suicide from 2010 to 2012 by calendar year, gender, age, and area of residence. The level of psychiatric contact in the preceding year was classified as "no psychiatric contact," "only outpatient psychiatric contact," "psychiatric emergency room contact," or "psychiatric hospital admission". Conditional logistic regression analysis was used to assess associations between variables and the risk of suicide. A total of 2528 older people committed suicide from 2010 to 2012, with a crude suicide mortality rate of 3.37/10,000. Compared to those who had no psychiatric contact in the preceding year, the adjusted odds ratios of suicide were 10.15 (95% CI=5.8-17.7) for those who had psychiatric emergency room contact, 6.57 (95% CI=3.7-11.6) for those who had psychiatric hospital admissions, and 3.64 (95% CI=3.0-4.4) for those with only outpatient psychiatric contact. The risk of suicide was higher in those who had depression (OR=3.49, 95% CI=2.2-5.4) and bipolar disorder (OR=1.98, 95% CI=1.1-3.6). Patients with cancer were associated with suicide (OR=8.96, 95% CI=5.6-14.4). The positive association with suicide and the level of psychiatric contact in the preceding year in older people indicated that the health personnel need to do a better job in determining possible risk for older people who had psychiatric contact, especially in emergency visit or psychiatric admission. A systematic approach to quality improvement in these settings is both available and necessary. Careful discharge planning and safe transitions of care to outpatient services are required for suicide prevention of high-risk patients after discharge. Copyright © 2017 Elsevier Inc. All rights reserved.

Human Gut Microbiota Predicts Susceptibility to Vibrio cholerae Infection.

PubMed

Midani, Firas S; Weil, Ana A; Chowdhury, Fahima; Begum, Yasmin A; Khan, Ashraful I; Debela, Meti D; Durand, Heather K; Reese, Aspen T; Nimmagadda, Sai N; Silverman, Justin D; Ellis, Crystal N; Ryan, Edward T; Calderwood, Stephen B; Harris, Jason B; Qadri, Firdausi; David, Lawrence A; LaRocque, Regina C

2018-04-12

Cholera is a public health problem worldwide and the risk factors for infection are only partially understood. We prospectively studied household contacts of cholera patients to compare those who were infected with those who were not. We constructed predictive machine learning models of susceptibility using baseline gut microbiota data. We identified bacterial taxa associated with susceptibility to Vibrio cholerae infection and tested these taxa for interactions with V. cholerae in vitro. We found that machine learning models based on gut microbiota predicted V. cholerae infection as well as models based on known clinical and epidemiological risk factors. A 'predictive gut microbiota' of roughly 100 bacterial taxa discriminated between contacts who developed infection and those who did not. Susceptibility to cholera was associated with depleted levels of microbes from the phylum Bacteroidetes. By contrast, a microbe associated with cholera by our modeling framework, Paracoccus aminovorans, promoted the in vitro growth of V. cholerae. Gut microbiota structure, clinical outcome, and age were also linked. These findings support the hypothesis that abnormal gut microbial communities are a host factor related to V. cholerae susceptibility.

Beta Atomic Contacts: Identifying Critical Specific Contacts in Protein Binding Interfaces

PubMed Central

Liu, Qian; Kwoh, Chee Keong; Hoi, Steven C. H.

2013-01-01

Specific binding between proteins plays a crucial role in molecular functions and biological processes. Protein binding interfaces and their atomic contacts are typically defined by simple criteria, such as distance-based definitions that only use some threshold of spatial distance in previous studies. These definitions neglect the nearby atomic organization of contact atoms, and thus detect predominant contacts which are interrupted by other atoms. It is questionable whether such kinds of interrupted contacts are as important as other contacts in protein binding. To tackle this challenge, we propose a new definition called beta (β) atomic contacts. Our definition, founded on the β-skeletons in computational geometry, requires that there is no other atom in the contact spheres defined by two contact atoms; this sphere is similar to the van der Waals spheres of atoms. The statistical analysis on a large dataset shows that β contacts are only a small fraction of conventional distance-based contacts. To empirically quantify the importance of β contacts, we design βACV, an SVM classifier with β contacts as input, to classify homodimers from crystal packing. We found that our βACV is able to achieve the state-of-the-art classification performance superior to SVM classifiers with distance-based contacts as input. Our βACV also outperforms several existing methods when being evaluated on several datasets in previous works. The promising empirical performance suggests that β contacts can truly identify critical specific contacts in protein binding interfaces. β contacts thus provide a new model for more precise description of atomic organization in protein quaternary structures than distance-based contacts. PMID:23630569

Determinants of Social Outcomes in Adults With Childhood-onset Epilepsy

PubMed Central

Baca, Christine B.; Rychlik, Karen; Vickrey, Barbara G.; Caplan, Rochelle; Testa, Francine M.; Levy, Susan R.

2016-01-01

BACKGROUND: Adults with childhood-onset epilepsy experience poorer adult social outcomes than their peers. The relative roles of seizures over time versus learning and psychiatric problems are unclear. METHODS: We examined independent influences of psychiatric and learning disorders and of seizure course in 241 young adults (22–35 years old) with uncomplicated epilepsy in a longitudinal community-based cohort study. Social outcomes were ascertained throughout the study. A history of psychiatric and learning problems was ascertained ∼9 years after study entry. Seizure course was: “Excellent,” no seizures after the first year, in complete remission at last contact (N = 95, 39%); “Good,” seizures occurred 1 to 5 years after diagnosis, in complete remission at last contact (N = 56, 23%); “Fluctuating,” more complicated trajectories, but never pharmacoresistant (N = 70, 29%); “Pharmacoresistant,” long-term pharmacoresistant (N = 20, 8%). Multiple logistic regression was used to identify contributors to each social outcome. RESULTS: Better seizure course predicted college completion, being either employed or pursuing a degree, and driving, but was not substantially associated with other social outcomes. Poorer seizure course was associated with a greater likelihood of having offspring, particularly in women without partners. Learning problems, psychiatric disorders, or both negatively influenced all but 2 of the social outcomes. CONCLUSIONS: In young adults with uncomplicated epilepsy, the course of seizures contributed primarily to education, employment, and driving. A history of learning problems and psychiatric disorders adversely influenced most adult outcomes. These findings identify potential reasons for vocational and social difficulties encountered by young adults with childhood epilepsy and areas to target for counseling and transition planning. PMID:26983470

Optimal routing of coordinated aircraft to Identify moving surface contacts

DTIC Science & Technology

2017-06-01

Time TAO Tactical Action Officer TSP Traveling Salesman Problem TSPTW TSP with Time Windows UAV unmanned aerial vehicle VRP Vehicle Routing...Orienteering Problem (OP), while the ORCA TI formulation follows the structure of a time dependent Traveling Salesman Problem (TSP), or a time dependent...Fox, Kenneth R., Bezalel Gavish, and Stephen C. Graves. 1980. “An n- Constraint Formulation of the ( Time Dependent) Traveling Salesman Problem

Do the contact angle and line tension of surface-attached droplets depend on the radius of curvature?

PubMed

Das, Subir K; Egorov, Sergei A; Virnau, Peter; Winter, David; Binder, Kurt

2018-06-27

Results from Monte Carlo simulations of wall-attached droplets in the three-dimensional Ising lattice gas model and in a symmetric binary Lennard-Jones fluid, confined by antisymmetric walls, are analyzed, with the aim to estimate the dependence of the contact angle [Formula: see text] on the droplet radius [Formula: see text] of curvature. Sphere-cap shape of the wall-attached droplets is assumed throughout. An approach, based purely on 'thermodynamic' observables, e.g. chemical potential, excess density due to the droplet, etc, is used, to avoid ambiguities in the decision which particles belong (or do not belong, respectively) to the droplet. It is found that the results are compatible with a variation [Formula: see text], [Formula: see text] being the contact angle in the thermodynamic limit ([Formula: see text]). The possibility to use such results to estimate the excess free energy related to the contact line of the droplet, namely the line tension, at the wall, is discussed. Various problems that hamper this approach and were not fully recognized in previous attempts to extract the line tension are identified. It is also found that the dependence of wall tensions on the difference of chemical potential of the droplet from that at the bulk coexistence provides effectively a change of the contact angle of similar magnitude. The simulation approach yields precise estimates for the excess density due to wall-attached droplets and the corresponding free energy excess, relative to a system without a droplet at the same chemical potential. It is shown that this information suffices to estimate nucleation barriers, not affected by ambiguities on droplet shape, contact angle and line tension.

Enhancing interacting residue prediction with integrated contact matrix prediction in protein-protein interaction.

PubMed

Du, Tianchuan; Liao, Li; Wu, Cathy H

2016-12-01

Identifying the residues in a protein that are involved in protein-protein interaction and identifying the contact matrix for a pair of interacting proteins are two computational tasks at different levels of an in-depth analysis of protein-protein interaction. Various methods for solving these two problems have been reported in the literature. However, the interacting residue prediction and contact matrix prediction were handled by and large independently in those existing methods, though intuitively good prediction of interacting residues will help with predicting the contact matrix. In this work, we developed a novel protein interacting residue prediction system, contact matrix-interaction profile hidden Markov model (CM-ipHMM), with the integration of contact matrix prediction and the ipHMM interaction residue prediction. We propose to leverage what is learned from the contact matrix prediction and utilize the predicted contact matrix as "feedback" to enhance the interaction residue prediction. The CM-ipHMM model showed significant improvement over the previous method that uses the ipHMM for predicting interaction residues only. It indicates that the downstream contact matrix prediction could help the interaction site prediction.

Maritime Domain Awareness: C4I for the 1000 Ship Navy

DTIC Science & Technology

2009-12-04

unit action, provide unit sensed contacts, coordinate unit operations, process unit information, release image , and release contact report, Figure 33...Intelligence Tasking Request Intelligence Summary Release Unit Person Incident Release Unit Vessel Incident Process Intelligence Tasking Release Image ...xi LIST OF FIGURES Figure 1. Functional Problem Sequence Process Flow. ....................................................4 Figure 2. United

Nickel-Free Alternatives Raise Awareness.

PubMed

Hill, Hannah; Goldenberg, Alina; Sheehan, Michael Patrick; Patel, Amy; Jacob, Sharon E

2015-01-01

Allergic contact dermatitis to nickel is a global health problem. Worldwide, nickel continues to be the most prevalent and relevant contact allergen detected in tested populations for the last 30 years. Thus, the need for nickel-free products is palpable. We present a sustainable resource to aid providers and consumers in locating a wide variety of nickel free alternatives.

[Online text-based psychosocial intervention for Youth in Quebec].

PubMed

Thoër, Christine; Noiseux, Kathia; Siche, Fabienne; Palardy, Caroline; Vanier, Claire; Vrignaud, Caroline

In 2013, Tel-jeunes created a text messaging intervention program to reach youth aged 12 to 17 years on their cell phones. Tel-jeunes was the first in the country to offer a text-based brief psychosocial interventions performed by professional counselors. Researchers were contacted to document and evaluate the program. The research aimed to: 1) determine motives, contexts and issues that lead young people to use the SMS service; 2) document the characteristics of text-based brief intervention; and 3) assess the advantages and difficulties encountered by counselors who respounded to youth text-messages. We conducted a multimethod research from November 2013 to May 2014. We held four focus groups with 23 adolescents aged 15 to 17 who had or not used the SMS service, conducted a content analysis of a corpus of 13,236 text messages (or 601 conversations), and two focus groups with 11 Tel-jeunes counselors, just over a year after the implantation of the service. Our findings show that the SMS service meets youth needs. They identify text messaging to be their prefered mode of communication with Tel-jeunes when they need support or information. Moreover, the service reaches young people who would not have felt confortable to contact Tel-jeunes by phone. We identified three dominant issues in youths demands: romantic relationships, psychological health and sexuality. Perceived benefits of the service include anonimity and privacy (cell phone providing the ability to text anywhere). Youth participants also appreciated writing to counselors as they felt they had more time to think abouth their questions and answers to the counselor. Counselors were more ambivalent. They considered text-based intervention to be very effective and satisfactory to adress youth information requests, but reported difficulties when dealing with more complex problems or with mental health issues. They reported that text-based communication makes it more difficult to assess youth emotional states, found the discontinuity of text-based conversations very frustrating, and experienced problems when dealing with several youth at the same time. They also struggled with some the computer-based platform features. Finding suggest that text-based intervention are now essential to reach out to youth seeking for information and help. But, Tel-jeunes text-based service required adaptations of the intervention model. Adjustment were made by the managment team when implementing the service which required taking into account youth needs, engaging in a continuous dialogue with counselors and working with the suppliers of the text-based platform to improve its features. Futur challenges include reaching out for boys, conducting interventions with younger youth who feel confortable contacting the service by SMS, and managing urgent requests initiated via web text-messaging apps rather than mobile phones.

Podiatric involvement in multidisciplinary falls-prevention clinics in Australia.

PubMed

Menz, Hylton B; Hill, Keith D

2007-01-01

Falls in older people are a major public health problem, and there is increasing evidence that foot problems and inappropriate footwear increase the risk of falls. Several multidisciplinary prevention clinics have been established to address the problem of falls; however, the role of podiatry in these clinics has not been clearly defined. The aims of this study were to determine the level of podiatric involvement in multidisciplinary falls clinics in Australia and to describe the assessments undertaken and interventions provided by podiatrists in these settings. A database of falls clinics was developed through consultation with departments of health in each state and territory. Clinic managers were contacted and surveyed as to whether the clinic incorporated podiatry services. If so, the podiatrists were contacted and asked to complete a brief questionnaire regarding their level of involvement and the assessment procedures and interventions offered. Of the 36 clinics contacted, 25 completed the survey. Only four of these clinics reported direct podiatric involvement. Despite the limited involvement of podiatry in these clinics, all of the clinic managers stated that they considered podiatry to have an important role to play in falls prevention. Podiatry service provision in falls clinics varied considerably in relation to eligibility criteria, assessments undertaken, and interventions provided. Despite the recognition that foot problems and inappropriate footwear are risk factors for falls, podiatry currently has a relatively minor and poorly defined role in multidisciplinary falls-prevention clinics in Australia.

A non-invasive implementation of a mixed domain decomposition method for frictional contact problems

NASA Astrophysics Data System (ADS)

Oumaziz, Paul; Gosselet, Pierre; Boucard, Pierre-Alain; Guinard, Stéphane

2017-11-01

A non-invasive implementation of the Latin domain decomposition method for frictional contact problems is described. The formulation implies to deal with mixed (Robin) conditions on the faces of the subdomains, which is not a classical feature of commercial software. Therefore we propose a new implementation of the linear stage of the Latin method with a non-local search direction built as the stiffness of a layer of elements on the interfaces. This choice enables us to implement the method within the open source software Code_Aster, and to derive 2D and 3D examples with similar performance as the standard Latin method.

An overview of the formulation, existence and uniqueness issues for the initial value problem raised by the dynamics of discrete systems with unilateral contact and dry friction

NASA Astrophysics Data System (ADS)

Ballard, Patrick; Charles, Alexandre

2018-03-01

In the end of the seventies, Schatzman and Moreau undertook to revisit the venerable dynamics of rigid bodies with contact and dry friction in the light of more recent mathematics. One claimed objective was to reach, for the first time, a mathematically consistent formulation of an initial value problem associated with the dynamics. The purpose of this article is to make a review of the today state-of-art concerning not only the formulation, but also the issues of existence and uniqueness of solution. xml:lang="fr"

Increased utilisation of primary healthcare in persons exposed to severe stress in prenatal life: a national population-based study in Denmark.

PubMed

Li, Jiong; Yang, Hu; Guldin, Mai-Britt; Vedsted, Peter; Vestergaard, Mogens

2015-01-08

Recent studies have suggested that stress in a pregnant mother may affect the future health of the unborn child negatively. An excellent proxy for health problems is the use of healthcare resources. Using nationwide data, we examined whether persons born to mothers who lost a close relative during pregnancy have more contacts to general practice. Population-based cohort study. Denmark. We included all children born in Denmark from 1973 to 2002 (N=2 032 528). Exposure of prenatal stress was defined as maternal bereavement by the death of a close relative during the antenatal period. The outcome of interest was contact with general practice between 2003 and 2009 when the participants were between 1 and 35 years of age. Poisson regression was used to assess the association between exposure and outcome. Contacts to general practitioner. Overall, persons exposed to prenatal stress had 2% more GP contacts than those not exposed, primarily due to increased utilisation of healthcare services during late adolescence and early adulthood. The exposed persons born to mothers who had lost a spouse had a higher risk (relative risk (RR) 1.12, 95% CI 1.10 to 1.14) and so did those born to mothers who had lost a close relative due to unexpected death (RR 1.06, 95% CI 1.05 to 1.06). Exposed persons had more contacts to general practice in daytime and more psychometric tests, talk therapies and C reactive protein tests than unexposed persons. Prenatal stress following maternal bereavement was associated with a slightly increased utilisation of primary healthcare, mainly due to increased healthcare needs related to mental health and infections. Understanding how stress during pregnancy influences the future health of the child is an important aspect of prenatal care. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Skin problems after a tsunami.

PubMed

Lee, S H; Choi, C P; Eun, H C; Kwon, O S

2006-08-01

On December 26, 2004, the biggest earthquake for 40 years, measuring 9.0 on the Richter scale, triggered a tsunami that pounded the coastal areas of South Asia and East Africa. The effects of the tsunami on skin conditions have not been evaluated. To determine the influence of the tsunami on skin conditions by evaluating the skin problems of patients presenting at hospitals after the tsunami. Between 5 and 25 January 2005, two dermatologists evaluated patients who complained of skin problems at an outpatient clinic and emergency room of a general hospital in Banda Aceh, Aceh Province, Indonesia. The total number of patients that presented during the study period was 235 (131 males and 104 females), and they had a total of 265 skin problems. In terms of age distribution, most subjects were in their fourth decade (23.0%), followed by the third (22.6%) and fifth decade (16.6%). The most prevalent skin problems were infections-infestations (32.5%), followed by eczemas (29.8%) and traumatic skin disorders (29.4%). In males, traumatic skin disorders were most common. The great majority of infection-infestation cases involved superficial fungal infections. Contact dermatitis accounted for three-quarters of eczema cases, and mainly involved the arms (40.0%) and legs (27.1%). The majority of traumatic skin disorders were lacerations, punctures and penetrations, and the feet (44.7%) and hands (18.8%) were most frequently affected. Unhygienic conditions, exposure to a hazardous environment and contact with various objects during and after the tsunami probably increased the prevalence of infections-infestations, traumatic skin disorders and contact dermatitis. To prevent these problems and associated secondary bacterial infections, health-related education and early medical management are required.

Development of 8-hydroxyquinoline metal based organic light-emitting diodes

NASA Astrophysics Data System (ADS)

Feng, Xiaodong

Because of its potential application for flat panel displays, solid-state lighting and 1.5 mum emitter for fiber optical communications, organic light-emitting diodes (OLEDs) have been intensively researched. One of the major problems with current OLED technology relates to inefficient electron injection at the cathode interface, which causes high driving voltage and poor device stability. Making a low resistance cathode contact for electron injection is critical to device performance. This work mainly focuses on cathode interface design and engineering. The Ohmic contact using a structure of C60/LiF/Al has been developed in electron only devices. It is found that application of the C60/LiF/Al contact to Alq based OLEDs leads to a dramatic reduction in driving voltages, a significant improvement in power efficiency, and a much slower aging process. A new cathode structure based on metal-organic-metal (MOM) tri-layer films has been developed. It is found that MOM cathodes reduce reflection by deconstructive optical interference from two metal films. The absolute reflectance from the MOM tr-ilayer films can be reduced to as low as 7% in the visible light spectrum. In actual working devices, the reflectance can be reduced from ˜80% to ˜20%. MOM cathodes provide a potential low-cost solution for high contrast full-color OLED displays. Low voltage Erq based OLEDs at 1.5 mum emission have been developed. The Erq/Ag cathode interface has been found to be efficient for electron injection. Dramatic improvement in driving voltage and power efficiency has been realized by implementing Bphen and C60 into Erq devices as an electron transport layer. Integration of Erq devices on Si wafers has also been demonstrated.

Steady sliding frictional contact problem for a 2d elastic half-space with a discontinuous friction coefficient and related stress singularities

NASA Astrophysics Data System (ADS)

Ballard, Patrick

2016-12-01

The steady sliding frictional contact problem between a moving rigid indentor of arbitrary shape and an isotropic homogeneous elastic half-space in plane strain is extensively analysed. The case where the friction coefficient is a step function (with respect to the space variable), that is, where there are jumps in the friction coefficient, is considered. The problem is put under the form of a variational inequality which is proved to always have a solution which, in addition, is unique in some cases. The solutions exhibit different kinds of universal singularities that are explicitly given. In particular, it is shown that the nature of the universal stress singularity at a jump of the friction coefficient is different depending on the sign of the jump.

Transverse compression of PPTA fibers

NASA Astrophysics Data System (ADS)

Singletary, James

2000-07-01

Results of single transverse compression testing of PPTA and PIPD fibers, using a novel test device, are presented and discussed. In the tests, short lengths of single fibers are compressed between two parallel, stiff platens. The fiber elastic deformation is analyzed as a Hertzian contact problem. The inelastic deformation is analyzed by elastic-plastic FE simulation and by laser-scanning confocal microscopy of the compressed fibers ex post facto. The results obtained are compared to those in the literature and to the theoretical predictions of PPTA fiber transverse elasticity based on PPTA crystal elasticity.

Reflections on psychoanalytic treatment of Lubavitch Chassidim couples: working with a culturally divergent population.

PubMed

Schulman, Martin A; Kaplan, Ricki S

2014-08-01

Chassidic Jews create separate developmental lines for males and females beginning at three years of age. Since early marriages are encouraged and there is minimal contact between the sexes prior to marriage, problems inevitably arise in relationships. This article discusses both newlywed and long-term married Lubavitch Chassidim in couples treatment with secular analysts, parameters necessary for successful treatment, and countertransferences that arise. It is part of an ongoing series of publications based on the authors' decade-long psychoanalytic work with this population.

Children’s Contact With Their Incarcerated Parents

PubMed Central

Poehlmann, Julie; Dallaire, Danielle; Loper, Ann Booker; Shear, Leslie D.

2014-01-01

Approximately 1.7 million children have parents who are incarcerated in prison in the United States, and possibly millions of additional children have a parent incarcerated in jail. Many affected children experience increased risk for developing behavior problems, academic failure, and substance abuse. For a growing number of children, incarcerated parents, caregivers, and professionals, parent– child contact during the imprisonment period is a key issue. In this article, we present a conceptual model to provide a framework within which to interpret findings about parent– child contact when parents are incarcerated. We then summarize recent research examining parent–child contact in context. On the basis of the research reviewed, we present initial recommendations for children’s contact with incarcerated parents and also suggest areas for future intervention and research with this vulnerable population. PMID:20822198

Viscoelastic reciprocating contacts in presence of finite rough interfaces: A numerical investigation

NASA Astrophysics Data System (ADS)

Putignano, Carmine; Carbone, Giuseppe

2018-05-01

Viscoelastic reciprocating contacts are crucial in a number of systems, ranging from sealing components to viscoelastic dampers. Roughness plays in these conditions a central role, but no exhaustive assessment in terms of influence on area, separation and friction has been drawn so far. This is due to the huge number of time and space scales involved in the problem. By means of an innovative Boundary Element methodology, which treats the time as a parameter and then requires only to discretize the space domain, we investigate the viscoelastic reciprocating contact mechanics between rough solids. In particular, we consider the alternate contact of a rigid finite-size rough punch over a viscoelastic layer: the importance of the domain finiteness in the determination of the contact area and the contact solution anisotropy is enlightened. Implications on real system may be drawn on this basis. Finally, we focus on the hysteretic cycle related to the viscoelastic tangential forces.

Numerical Simulation of the Ground Response to the Tire Load Using Finite Element Method

NASA Astrophysics Data System (ADS)

Valaskova, Veronika; Vlcek, Jozef

2017-10-01

Response of the pavement to the excitation caused by the moving vehicle is one of the actual problems of the civil engineering practice. The load from the vehicle is transferred to the pavement structure through contact area of the tires. Experimental studies show nonuniform distribution of the pressure in the area. This non-uniformity is caused by the flexible nature and the shape of the tire and is influenced by the tire inflation. Several tire load patterns, including uniform distribution and point load, were involved in the numerical modelling using finite element method. Applied tire loads were based on the tire contact forces of the lorry Tatra 815. There were selected two procedures for the calculations. The first one was based on the simplification of the vehicle to the half-part model. The characteristics of the vehicle model were verified by the experiment and by the numerical model in the software ADINA, when vehicle behaviour during the ride was investigated. Second step involved application of the calculated contact forces for the front axle as the load on the multi-layered half space representing the pavement structure. This procedure was realized in the software Plaxis and considered various stress patterns for the load. The response of the ground to the vehicle load was then analyzed. Axisymmetric model was established for this procedure. The paper presents the results of the investigation of the contact pressure distribution and corresponding reaction of the pavement to various load distribution patterns. The results show differences in some calculated quantities for different load patterns, which need to be verified by the experimental way when also ground response should be observed.

In-plane Schottky-barrier field-effect transistors based on 1T/2H heterojunctions of transition-metal dichalcogenides

NASA Astrophysics Data System (ADS)

Fan, Zhi-Qiang; Jiang, Xiang-Wei; Luo, Jun-Wei; Jiao, Li-Ying; Huang, Ru; Li, Shu-Shen; Wang, Lin-Wang

2017-10-01

As Moore's law approaches its end, two-dimensional (2D) materials are intensely studied for their potentials as one of the "More than Moore' (MM) devices. However, the ultimate performance limits and the optimal design parameters for such devices are still unknown. One common problem for the 2D-material-based device is the relative weak on-current. In this study, two-dimensional Schottky-barrier field-effect transistors (SBFETs) consisting of in-plane heterojunctions of 1T metallic-phase and 2H semiconducting-phase transition-metal dichalcogenides (TMDs) are studied following the recent experimental synthesis of such devices at a much larger scale. Our ab initio simulation reveals the ultimate performance limits of such devices and offers suggestions for better TMD materials. Our study shows that the Schottky-barrier heights (SBHs) of the in-plane 1T/2H contacts are smaller than the SBHs of out-of-plane contacts, and the contact coupling is also stronger in the in-plane contact. Due to the atomic thickness of the monolayer TMD, the average subthreshold swing of the in-plane TMD-SBFETs is found to be close to the limit of 60 mV/dec, and smaller than that of the out-of-plane TMD-SBFET device. Different TMDs are considered and it is found that the in-plane WT e2-SBFET provides the best performance and can satisfy the performance requirement of the sub-10-nm high-performance transistor outlined by the International Technology Roadmap for Semiconductors, and thus could be developed into a viable sub-10-nm MM device in the future.

Numerical investigations on unstable direct contact condensation of cryogenic fluids

NASA Astrophysics Data System (ADS)

Jayachandran, K. N.; Arnab, Roy; Parthasarathi, Ghosh

2017-02-01

A typical problem of Direct Contact Condensation (DCC) occurs at the liquid oxygen (LOX) booster turbopump exit of oxidiser rich staged combustion cycle based semi-cryogenic rocket engines, where the hot gas mixture (predominantly oxygen and small amounts of combustion products) that runs the turbine mixes with LOX from the pump exit. This complex multiphase phenomena leads to the formation of solid CO2 & H2O, which is undesirable for the functioning of the main LOX turbopump. As a starting point for solving this complex problem, in this study, the hot gas mixture is taken as pure oxygen and hence, DCC of pure oxygen vapour jets in subcooled liquid oxygen is simulated using the commercial CFD package ANSYS CFX®. A two fluid model along with the thermal phase change model is employed for capturing the heat and mass transfer effects. The study mainly focuses on the subsonic DCC bubbling regime, which is reported as unstable with bubble formation, elongation, necking and collapsing effects. The heat transfer coefficients over a period of time have been computed and the various stages of bubbling have been analysed with the help of vapour volume fraction and pressure profiles. The results obtained for DCC of oxygen vapour-liquid mixtures is in qualitative agreement with the experimental results on DCC of steam-water mixtures.

Numerical study of droplet impact and rebound on superhydrophobic surface

NASA Astrophysics Data System (ADS)

Cai, Xuan; Wu, Yanchen; Woerner, Martin; Frohnapfel, Bettina

2017-11-01

Droplet impact and rebound on superhydrophobic surface is an important process in many applications; among them are developing self-cleaning or anti-icing materials and limiting liquid film formation of Diesel Exhaust Fluid (DEF) in exhaust gas pipe. In the latter field, rebound of DEF droplet from wall is desired as an effective mean for avoiding or reducing unwanted solid deposition. Our goal is to numerically study influence of surface wettability on DEF droplet impact and rebound behavior. A phase-field method is chosen, which was implemented in OpenFOAM by us and validated for wetting-related interfacial flow problems. In the present contribution we first numerically reproduce relevant experimental studies in literature, to validate the code for droplet impact and rebound problem. There we study droplet-surface contact time, maximum/instantaneous spreading factor and droplet shape evolution. Our numerical results show good agreement with experimental data. Next we investigate for DEF droplets the effects of diameter, impact velocity and surface wettability on rebound behavior and jumping height. Based on Weber number and equilibrium contact angle, two regimes are identified. We show that surface wettability is a deciding factor for achieving rebound event. This work is supported by Foundation ``Friedrich-und-Elisabeth Boysen Stiftung fuer Forschung und Innovation'' (BOY-127-TP1).

How I Manage Breast Problems in Athletes.

PubMed

Haycock, C E

1987-03-01

In brief: Although breast problems usually are associated with women, men have them also. This paper reviews the anatomy of the breast and describes injuries and disorders that occur in both men and women, including runner's nipples, tumors, and trauma (common in contact and racket sports). The author also discusses management of these problems and describes various types of sports bras.

Parents and the School Dropout Problem.

ERIC Educational Resources Information Center

Ferguson, Earl E.; Killingsworth, Jerry

1987-01-01

The school dropout problem is discussed, with suggestions for parents on ensuring that their children do not become part of the dropout population, including; monitoring children's school attendance patterns; making sure children understand how important school and attendance is; maintaining close contact with teachers; and helping children…

Evaluation of the Discipline Helpline.

ERIC Educational Resources Information Center

Fine, Andrea

The National Center for the Study of Corporal Punishment and Alternatives in the Schools, established the Discipline Helpline to guide parents in handling specific discipline problems. To evaluate the telephone counseling service, 63 persons who had contacted the Helpline for assistance with specific discipline problems completed the Helpline…

Development of a high hertz-stress contact for conventional batch production using a unique scribing technology

NASA Astrophysics Data System (ADS)

Bhuiyan, M. M. I.; Alamgir, T.; Bhuiyan, M.; Kajihara, M.

2013-12-01

Gradually the electronic devices are getting more compact dimension with respect to the width and thickness. As a result, the contacts are becoming thinner and which leads the contact to be loose and unstable contact. In comercial stamping methode, connector tip diameter should be more than 300μm due to its size limitation. Consequently, the connector contact resistance is becoming higher due to weak contact force. To overcome this problem there were few more basic research using MEMS and Electro Fine Forming (EFF) technology to make high Hertz-Stress Contact (5μm) due to the limitation in the commercial stamping process and the result was in satisfactory level. However, since the MEMS and EFF fabrication is costly therefore, a new method is introduced in this paper using the commercial Phosphor Bronze stamping method to reduce the production cost. Moreover, scribing method is used to make tip on the contact. Accordingly, more compact fine pitch contact is successfully fabricated and tested with 5μm High Hertz Stress without using the MEMS and EFF technology. Hence the manufactured contact resistance becomes less than 20mΩ ±5mΩ.

Gold--a controversial sensitizer. European Environmental and Contact Dermatitis Research Group.

PubMed

Bruze, M; Andersen, K E

1999-06-01

Until recently, gold allergy was considered to be extremely rare. Gold has been used and worshipped for thousands of years without any obvious complaints of skin problems, either in those participating in mining and other ways of prospecting, or in those wearing jewellery. When studies on contact allergy to gold sodium thiosulfate were published at the beginning of the 1990s, the allergic nature of the reported positive patch test reactions to gold was questioned. The major argument for such questioning was the lack of demonstrable clinical relevance in most positive reactors. A major reason for the questioning may have been confusion in differentiating between contact allergy and allergic contact dermatitis. To arrive at a diagnosis of allergic contact dermatitis, 3 steps have, in principle, to be fulfilled: (i) establishment of contact allergy; (ii) demonstration of present exposure; (iii) assessment of clinical relevance, i.e., causing or aggravating a contact dermatitis. In this paper, these steps are discussed with regard to gold. With our present knowledge of contact allergy-allergic contact dermatitis, we do not recommend including gold sodium thiosulfate in the standard series. It should be applied for scientific purposes and when allergic contact dermatitis from gold is suspected.

Closed loop problems in biomechanics. Part II--an optimization approach.

PubMed

Vaughan, C L; Hay, J G; Andrews, J G

1982-01-01

A closed loop problem in biomechanics may be defined as a problem in which there are one or more closed loops formed by the human body in contact with itself or with an external system. Under certain conditions the problem is indeterminate--the unknown forces and torques outnumber the equations. Force transducing devices, which would help solve this problem, have serious drawbacks, and existing methods are inaccurate and non-general. The purposes of the present paper are (1) to develop a general procedure for solving closed loop problems; (2) to illustrate the application of the procedure; and (3) to examine the validity of the procedure. A mathematical optimization approach is applied to the solution of three different closed loop problems--walking up stairs, vertical jumping and cartwheeling. The following conclusions are drawn: (1) the method described is reasonably successful for predicting horizontal and vertical reaction forces at the distal segments although problems exist for predicting the points of application of these forces; (2) the results provide some support for the notion that the human neuromuscular mechanism attempts to minimize the joint torques and thus, to a certain degree, the amount of muscular effort; (3) in the validation procedure it is desirable to have a force device for each of the distal segments in contact with a fixed external system; and (4) the method is sufficiently general to be applied to all classes of closed loop problems.

Applications of aerospace technology to petroleum extraction and reservoir engineering

NASA Technical Reports Server (NTRS)

Jaffe, L. D.; Back, L. H.; Berdahl, C. M.; Collins, E. E., Jr.; Gordon, P. G.; Houseman, J.; Humphrey, M. F.; Hsu, G. C.; Ham, J. D.; Marte, J. E.;

HTS thin films: Passive microwave components and systems integration issues

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miranda, F.A.; Chorey, C.M.; Bhasin, K.B.

1994-12-31

The excellent microwave properties of the High-Temperature-Superconductors (HTS) have been amply demonstrated in the laboratory by techniques such as resonant cavity, power transmission and microstrip resonator measurements. The low loss and high Q passive structures made possible with HTS, present attractive options for applications in commercial, military and space-based systems. However, to readily insert HTS into these systems improvement is needed in such areas as repeatability in the deposition and processing of the HTS films, metal-contact formation, wire bonding, and overall film endurance to fabrication and assembly procedures. In this paper we present data compiled in our lab which illustratemore » many of the problems associated with these issues. Much of this data were obtained in the production of a space qualified hybrid receiver-downconverter module for the Naval Research Laboratory`s High Temperature Superconductivity Space Experiment II (HTSSE-II). Examples of variations observed in starting films and finished circuits will be presented. It is shown that under identical processing the properties of the HTS films can degrade to varying extents. Finally, we present data on ohmic contacts and factors affecting their adhesion to HTS films, strength of wire bonds made to such contacts, and aging effects.« less

Gas chromatography - Mass spectrometry analysis and antibacterial activity of Cinnamomum burmanii essential oil to Staphylococcus aureus and Escherichia coli by gaseous contact

NASA Astrophysics Data System (ADS)

Chairunnisa, Tamhid, Hady Anshory; Nugraha, Arde Toga

2017-03-01

Infectious diseases and antibiotic resistance becomes a problem that must be resolved. Plant based products are among the alternative agents examined in order to replace conventional antibiotics. Cinnamaldehyde is one of the compound in cinnamon oil that has antibacterial activity. But the other compounds in cinnamon oil has also the potential antibacterial activity. The purpose of this study to conduct GC-MS analysis of cinnamon oil and its antibacterial activity to Staphylococcus aureus and Escherichia coli by gaseous contact. Cinnamomum burmannii was distilled by water-steam distillation to obtain essential oil. Identification of compounds was analyzed by GC-MS. Antibacterial activity was observed by gaseous contact method in airtight boxes. The GC-MS analyzed showed that there are four major compounds of cinnamon oil, trans-cinnamaldehyde (56,10%), 1,8-cineole (16,53%), α-pinene (3,44%) and α -terpineol (3,05%). The Minimum Inhibitory Dose (MID) of cinnamon oil to E. coli and S. aureus was 12.5 µL/L and 6.26 µL/L respectively. Gas compounds of cinnamon oil has more effective to gram-positive bacteria than gram-negative bacteria.