The 2002 to 2010 mask survey trend analysis

NASA Astrophysics Data System (ADS)

Hughes, Greg; Chan, David

2011-03-01

Microelectronics industry leaders consistently cite the cost and cycle time of mask technology and mask supply as top critical issues. A survey was designed with input from semiconductor company mask technologists and merchant mask suppliers and support from SEMATECH to gather information about the mask industry as an objective assessment of its overall condition. This year's assessment was the ninth in the current series of annual reports. Its data were presented in detail at BACUS, and the detailed trend analysis is presented at EMLC. With continued industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. The report will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. Results will be used to guide future investments in critical path issues. This year's survey is basically the same as the 2005 through 2010 surveys. Questions are grouped into six categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category are multiple questions that ultimately create a detailed profile of both the business and technical status of the critical mask industry.

Academia-industry collaboration in continuing medical education: description of two approaches.

PubMed

Katz, Harvey P; Goldfinger, Stephen E; Fletcher, Suzanne W

2002-01-01

Although concerns have been raised about industry support of continuing medical education (CME), there are few published reports of academia-industry collaboration in the field. We describe and evaluate Pri-Med, a CME experience for primary care clinicians developed jointly by the Harvard Medical School (HMS) and M/C Communications. Since 1995, 19 Pri-Med conferences have been held in four cities, drawing more than 100,000 primary care clinicians. The educational core of each Pri-Med conference is a 3-day Harvard course, "Current Clinical Issues in Primary Care." Course content is determined by a faculty committee independent of any commercial influence. Revenues from multiple industry sources flow through M/C Communications to the medical school as an educational grant to support primary care education. Pri-Med also offers separate pharmaceutical company-funded symposia. Comparing the two educational approaches during four conferences, 221 HMS talks and 103 symposia were presented. The HMS course covered a wide range with 133 topics; the symposia focused on 30 topics, most of which were linked to recently approved new therapeutic products manufactured by the funders. Both the course and the symposia were highly rated by attendees. When CME presentations for primary care physicians receive direct support from industry, the range of offered topics is narrower than when programs are developed independently of such support. There appear to be no differences in the perceived quality of presentations delivered with and without such support. Our experience suggests that a firewall between program planners and providers of financial support will result in a broader array of educational subjects relevant to the field of primary care.

Aging, Counterfeiting Configuration Control (AC3)

DTIC Science & Technology

2010-01-31

SARA continuously polls contributing data sources on a data specific refresh cycle. SARA supports a continuous risk topology assessment by the program...function was demonstrated at the bread -board level based on comparison of North American Industrialization Classification System (NAICS) codes. Other

Strategies for sustainable development of industrial park in Ulsan, South Korea--from spontaneous evolution to systematic expansion of industrial symbiosis.

PubMed

Park, Hung-Suck; Rene, Eldon R; Choi, Soo-Mi; Chiu, Anthony S F

2008-04-01

The Korea National Cleaner Production Center (KNCPC) affiliated to the Korea Institute of Industrial Technology (KITECH) has started a 15 year, 3-phase EIP master plan with the support of Ministry of Commerce, Industry, and Energy (MOCIE). A total of 6 industrial parks, including industrial parks in Ulsan city, known as the industrial capital of South Korea, are planning projects to find the feasibility of shifting existing industrial parks to eco-industrial parks. The basic survey shows that Ulsan industrial complex has been continuously evolving from conventional industrial complexes to eco-industrial parks by spontaneous industrial symbiosis. This paper describes the Korean national policies and the developmental activities of this vision to drive the global trend of innovation for converting the existing industrial parks to eco-industrial parks through inter-industry waste, energy, and material exchange in Ulsan Industrial complexes. In addition, the primary and supportive components of the Ulsan EIP pilot project, which will be implemented for 5 years is elaborated with its schedules and economic benefits.

Mask industry assessment trend analysis

NASA Astrophysics Data System (ADS)

Hughes, Greg; Yun, Henry

2009-01-01

Microelectronics industry leaders routinely name the cost and cycle time of mask technology and mask supply as top critical issues. A survey was created with support from SEMATECH to gather information about the mask industry as an objective assessment of its overall condition. This year's survey data were presented in detail at BACUS and the detailed trend analysis presented at EMLC. The survey is designed with the input of semiconductor company mask technologists and merchant mask suppliers. This year's assessment is the seventh in the current series of annual reports. With continued industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. The report will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. The results will be used to guide future investments on critical path issues. This year's survey is basically the same as the surveys in 2005 through 2007. Questions are grouped into seven categories: General Business Profile Information, Data Processing, Yields and Yield Loss, Mechanisms, Delivery Times, Returns, and Services. (Examples are given below). Within each category is a multitude of questions that creates a detailed profile of both the business and technical status of the critical mask industry.

Using ergonomics checkpoints to support a participatory ergonomics intervention in an industrially developing country (IDC)--a case study.

PubMed

Helali, Faramarz

2009-01-01

To achieve ergonomics awareness in 3 subsidiary companies, an intervention team was formed. The aims of this study were to implement basic ergonomics through a participatory ergonomics intervention process that can support a continuous learning process and lead to an improvement in health and safety as well as in the work systems in the organization. The findings of this study (i.e., method, continuous learning and integration) were key to making the participatory ergonomics intervention successful. Furthermore, 4 issues of the ergonomics checkpoints (i.e., work schedules, work tasks, healthy work organization and learning) for assessing the work system were found suitable for both changing work schedules and for improving the work system. This paper describes the result of this project and also the experiences gained and the conclusions reached from using the International Labour Office's ergonomics checkpoints in the industries of industrially developing country.

Family support for the elderly in Korea: continuity, change, future directions, and cross-cultural concerns.

PubMed

Sung, K T

2001-01-01

This article discusses major issues and concerns regarding family support for parents and elderly people in industrialized and urbanized Korea. It summarizes new trends in family support for elderly members, continuing influences of the traditional value of family support (filial piety), growing needs for public services for elderly people and their families, urgent calls for the state to assume greater responsibilities for providing social security and services for the elderly, needs for cross-cultural studies of family support, and certain cultural similarities and differences to be considered. The article concludes with some suggestions for future research.

The Education Review Board: A Mechanism for Managing Potential Conflicts of Interest in Medical Education.

PubMed

Borus, Jonathan F; Alexander, Erik K; Bierer, Barbara E; Bringhurst, F Richard; Clark, Christopher; Klanica, Kaley E; Stewart, Erin C; Friedman, Lawrence S

2015-12-01

Concerns about the influence of industry support on medical education, research, and patient care have increased in both medical and political circles. Some academic medical centers, questioning whether industry support of medical education could be appropriate and not a conflict of interest, banned such support. In 2009, a Partners HealthCare System commission concluded that interactions with industry remained important to Partners' charitable academic mission and made recommendations to transparently manage such relationships. An Education Review Board (ERB) was created to oversee and manage all industry support of Partners educational activities.Using a case review method, the ERB developed guidelines to implement the commission's recommendations. A multi-funder rule was established that prohibits industry support from only one company for any Partners educational activity. Within that framework, the ERB established guidelines on industry support of educational conferences, clinical fellowships, and trainees' expenses for attending external educational programs; gifts of textbooks and other educational materials; promotional opportunities associated with Partners educational activities; Partners educational activities under contract with an industry entity; and industry-run programs using Partners resources.Although many changes have resulted from the implementation of the ERB guidelines, the number of industry grants for Partners educational activities has remained relatively stable, and funding for these activities declined only moderately during the first three full calendar years (2011-2013) of ERB oversight. The ERB continually educates both the Partners community and industry about the rationale for its guidelines and its openness to their refinement in response to changes in the external environment.

Programs That Support Safety and Security for the Transit Industry

DOT National Transportation Integrated Search

2001-03-01

FTA's Office of Safety and Security (Office) directly supports the U.S. Department of Transportation's safety goals through a series of programs designed to maintain continuous improvement in the safety and security of our nation's transit systems. T...

New technologies emerge.

PubMed

Gray, S P

1997-01-01

Technology vendors continue to invent new devices, systems and processes to sell to the health care industry. Drugs, instruments and procedures continue to improve and address disease and injury treatment needs. In addition to these direct medical treatment innovations and enhancements, a number of new supporting systems and products have emerged. These support technologies hold significant promise for managers to make day-to-day execution of health care delivery more cost effective and customer friendly.

The sugar-sweetened beverage wars: public health and the role of the beverage industry

PubMed Central

Welsh, Jean A.; Lundeen, Elizabeth A.; Stein, Aryeh D.

2015-01-01

Purpose of review To discuss the current data on sugar-sweetened beverage (SSB) consumption trends, evidence of the health impact, and the role of industry in efforts to reduce the consumption. Recent findings Previously rising SSB consumption rates have declined recently, but continue to contribute added sugars beyond the limit advised by the American Heart Association. A recent meta-analysis concluded that SSBs likely increase body weight and recent long-term studies support the previous findings of increased risk of diabetes, dyslipidemia, and hypertension. Beverage companies have played an active role in some SSB reduction efforts by reducing the sale of SSBs in schools, limiting television advertising to children, and increasing the availability of smaller portion-size options. Industry has opposed efforts to restrict the availability of large portion sizes and implement an excise tax. Current industry efforts include the promotion of alternative beverages perceived to be healthier as well as SSBs through Internet and social media. Summary Continuing high SSB consumption and associated health risks highlight the need for further public health action. The beverage industry has supported some efforts to reduce the consumption of full sugar beverages, but has actively opposed others. The impact of industry efforts to promote beverage alternatives perceived as healthier is unknown. PMID:23974767

The sugar-sweetened beverage wars: public health and the role of the beverage industry.

PubMed

Welsh, Jean A; Lundeen, Elizabeth A; Stein, Aryeh D

2013-10-01

To discuss the current data on sugar-sweetened beverage (SSB) consumption trends, evidence of the health impact, and the role of industry in efforts to reduce the consumption. Previously rising SSB consumption rates have declined recently, but continue to contribute added sugars beyond the limit advised by the American Heart Association. A recent meta-analysis concluded that SSBs likely increase body weight and recent long-term studies support the previous findings of increased risk of diabetes, dyslipidemia, and hypertension. Beverage companies have played an active role in some SSB reduction efforts by reducing the sale of SSBs in schools, limiting television advertising to children, and increasing the availability of smaller portion-size options. Industry has opposed efforts to restrict the availability of large portion sizes and implement an excise tax. Current industry efforts include the promotion of alternative beverages perceived to be healthier as well as SSBs through Internet and social media. Continuing high SSB consumption and associated health risks highlight the need for further public health action. The beverage industry has supported some efforts to reduce the consumption of full sugar beverages, but has actively opposed others. The impact of industry efforts to promote beverage alternatives perceived as healthier is unknown.

Application of CFCC technology to hot gas filtration applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Richlen, S.

1995-06-01

Discussion will feature high temperature filter development under the DOE`s Office of Industrial Technologies Continuous Fiber Ceramic Composite (CFCC) Program. Within the CFCC Program there are four industry projects and a national laboratory technology support project. Atlantic Research, Babcock & Wilcox, DuPont Lanxide Composites, and Textron are developing processing methods to produce CFCC Components with various types of matrices and composites, along with the manufacturing methods to produce industrial components, including high temperature gas filters. The Oak Ridge National Laboratory is leading a National Laboratory/University effort to increase knowledge of such generic and supportive technology areas as environmental degradation, measurementmore » of mechanical properties, long-term performance, thermal shock and thermal cycling, creep and fatigue, and non-destructive characterization. Tasks include composite design, materials characterization, test methods, and performance-related phenomena, that will support the high temperature filter activities of industry and government.« less

The Liberal Arts College and Adult Continuing Education: A Rationale.

ERIC Educational Resources Information Center

Courtney, Leonard; Wozniak, John S.

1978-01-01

The feasibility of private liberal arts college involvement with adult and continuing education is examined in terms of a model, which sponsors an Employee Learning Program. Course offerings have received positive support from the college faculty and administration, cautious involvement by business and industry, and meager interest from organized…

Quid Pro Quo: Tobacco Companies and the Black Press

PubMed Central

McCandless, Phyra M.; Yerger, Valerie B.

2012-01-01

Objectives. We explored the relationship between tobacco companies and the Black press, which plays an important role in conveying information and opinions to Black communities. Methods. In this archival case study, we analyzed data from internal tobacco industry documents and archives of the National Newspaper Publishers Association (NNPA), the trade association of the Black press. Results. In exchange for advertising dollars and other support, the tobacco industry expected and received support from Black newspapers for tobacco industry policy positions. Beginning in the 1990s, resistance from within the Black community and reduced advertising budgets created counterpressures. The tobacco industry, however, continued to sustain NNPA support. Conclusions. The quid pro quo between tobacco companies and the Black press violated journalistic standards and represented an unequal trade. Although numerous factors explain today's tobacco-related health disparities, the Black press's service to tobacco companies is problematic because of the trust that the community placed in such media. Understanding the relationship between the tobacco industry and the NNPA provides insight into strategies that the tobacco industry may use in other communities and countries. PMID:21852652

Quid pro quo: tobacco companies and the black press.

PubMed

McCandless, Phyra M; Yerger, Valerie B; Malone, Ruth E

2012-04-01

We explored the relationship between tobacco companies and the Black press, which plays an important role in conveying information and opinions to Black communities. In this archival case study, we analyzed data from internal tobacco industry documents and archives of the National Newspaper Publishers Association (NNPA), the trade association of the Black press. In exchange for advertising dollars and other support, the tobacco industry expected and received support from Black newspapers for tobacco industry policy positions. Beginning in the 1990s, resistance from within the Black community and reduced advertising budgets created counterpressures. The tobacco industry, however, continued to sustain NNPA support. The quid pro quo between tobacco companies and the Black press violated journalistic standards and represented an unequal trade. Although numerous factors explain today's tobacco-related health disparities, the Black press's service to tobacco companies is problematic because of the trust that the community placed in such media. Understanding the relationship between the tobacco industry and the NNPA provides insight into strategies that the tobacco industry may use in other communities and countries.

Mask industry assessment trend analysis

NASA Astrophysics Data System (ADS)

Shelden, Gilbert; Marmillion, Patricia; Hughes, Greg

2008-04-01

Microelectronics industry leaders routinely name the cost and cycle time of mask technology and mask supply as top critical issues. A survey was created with support from SEMATECH and administered by SEMI North America to gather information about the mask industry as an objective assessment of its overall condition. This year's survey data were presented in detail at BACUS and the detailed trend analysis presented at EMLC. The survey is designed with the input of semiconductor company mask technologists, merchant mask suppliers, and industry equipment makers. This year's assessment is the sixth in the current series of annual reports. With continued industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. The report will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. The results will be used to guide future investments on critical path issues. This year's survey is basically the same as the 2005 and 2006 surveys. Questions are grouped into eight categories: General Business Profile Information, Data Processing, Yields and Yield Loss, Mechanisms, Delivery Times, Returns and Services, Operating Cost Factors, and Equipment Utilization. Within each category is a multitude of questions that creates a detailed profile of both the business and technical status of the critical mask industry. Note: the questions covering operating cost factors and equipment utilization were added to the survey only in 2005; therefore, meaningful trend analysis is not available.

NASA Research to Support the Airlines

NASA Technical Reports Server (NTRS)

Evans, Cody; Mogford, Richard H.

2017-01-01

This presentation is an update on continued research and partnerships with airline and industry partners. In this presentation, several recent research efforts are discussed and illustrations are provided to bring greater awareness to the commercial aviation industry. By discussing projects like the Flight Awareness Collaboration Tool and dispatcher human factors studies, we can solicit additional feedback and participation.

Control Systems Engineering in Continuous Pharmaceutical Manufacturing May 20-21, 2014 Continuous Manufacturing Symposium.

PubMed

Myerson, Allan S; Krumme, Markus; Nasr, Moheb; Thomas, Hayden; Braatz, Richard D

2015-03-01

This white paper provides a perspective of the challenges, research needs, and future directions for control systems engineering in continuous pharmaceutical processing. The main motivation for writing this paper is to facilitate the development and deployment of control systems technologies so as to ensure quality of the drug product. Although the main focus is on small-molecule pharmaceutical products, most of the same statements apply to biological drug products. An introduction to continuous manufacturing and control systems is followed by a discussion of the current status and technical needs in process monitoring and control, systems integration, and risk analysis. Some key points are that: (1) the desired objective in continuous manufacturing should be the satisfaction of all critical quality attributes (CQAs), not for all variables to operate at steady-state values; (2) the design of start-up and shutdown procedures can significantly affect the economic operation of a continuous manufacturing process; (3) the traceability of material as it moves through the manufacturing facility is an important consideration that can at least in part be addressed using residence time distributions; and (4) the control systems technologies must assure quality in the presence of disturbances, dynamics, uncertainties, nonlinearities, and constraints. Direct measurement, first-principles and empirical model-based predictions, and design space approaches are described for ensuring that CQA specifications are met. Ways are discussed for universities, regulatory bodies, and industry to facilitate working around or through barriers to the development of control systems engineering technologies for continuous drug manufacturing. Industry and regulatory bodies should work with federal agencies to create federal funding mechanisms to attract faculty to this area. Universities should hire faculty interested in developing first-principles models and control systems technologies for drug manufacturing that are easily transportable to industry. Industry can facilitate the move to continuous manufacturing by working with universities on the conception of new continuous pharmaceutical manufacturing process unit operations that have the potential to make major improvements in product quality, controllability, or reduced capital and/or operating costs. Regulatory bodies should ensure that: (1) regulations and regulatory practices promote, and do not derail, the development and implementation of continuous manufacturing and control systems engineering approaches; (2) the individuals who approve specific regulatory filings are sufficiently trained to make good decisions regarding control systems approaches; (3) provide regulatory clarity and eliminate/reduce regulatory risks; (4) financially support the development of high-quality training materials for use of undergraduate students, graduate students, industrial employees, and regulatory staff; (5) enhance the training of their own technical staff by financially supporting joint research projects with universities in the development of continuous pharmaceutical manufacturing processes and the associated control systems engineering theory, numerical algorithms, and software; and (6) strongly encourage the federal agencies that support research to fund these research areas. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

Control systems engineering in continuous pharmaceutical manufacturing. May 20-21, 2014 Continuous Manufacturing Symposium.

PubMed

Myerson, Allan S; Krumme, Markus; Nasr, Moheb; Thomas, Hayden; Braatz, Richard D

2015-03-01

This white paper provides a perspective of the challenges, research needs, and future directions for control systems engineering in continuous pharmaceutical processing. The main motivation for writing this paper is to facilitate the development and deployment of control systems technologies so as to ensure quality of the drug product. Although the main focus is on small-molecule pharmaceutical products, most of the same statements apply to biological drug products. An introduction to continuous manufacturing and control systems is followed by a discussion of the current status and technical needs in process monitoring and control, systems integration, and risk analysis. Some key points are that: (1) the desired objective in continuous manufacturing should be the satisfaction of all critical quality attributes (CQAs), not for all variables to operate at steady-state values; (2) the design of start-up and shutdown procedures can significantly affect the economic operation of a continuous manufacturing process; (3) the traceability of material as it moves through the manufacturing facility is an important consideration that can at least in part be addressed using residence time distributions; and (4) the control systems technologies must assure quality in the presence of disturbances, dynamics, uncertainties, nonlinearities, and constraints. Direct measurement, first-principles and empirical model-based predictions, and design space approaches are described for ensuring that CQA specifications are met. Ways are discussed for universities, regulatory bodies, and industry to facilitate working around or through barriers to the development of control systems engineering technologies for continuous drug manufacturing. Industry and regulatory bodies should work with federal agencies to create federal funding mechanisms to attract faculty to this area. Universities should hire faculty interested in developing first-principles models and control systems technologies for drug manufacturing that are easily transportable to industry. Industry can facilitate the move to continuous manufacturing by working with universities on the conception of new continuous pharmaceutical manufacturing process unit operations that have the potential to make major improvements in product quality, controllability, or reduced capital and/or operating costs. Regulatory bodies should ensure that: (1) regulations and regulatory practices promote, and do not derail, the development and implementation of continuous manufacturing and control systems engineering approaches; (2) the individuals who approve specific regulatory filings are sufficiently trained to make good decisions regarding control systems approaches; (3) provide regulatory clarity and eliminate/reduce regulatory risks; (4) financially support the development of high-quality training materials for use of undergraduate students, graduate students, industrial employees, and regulatory staff; (5) enhance the training of their own technical staff by financially supporting joint research projects with universities in the development of continuous pharmaceutical manufacturing processes and the associated control systems engineering theory, numerical algorithms, and software; and (6) strongly encourage the federal agencies that support research to fund these research areas. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

Industrial Funding of Academic R&D Continues to Decline in FY 2004. Info Brief. NSF 06-315

ERIC Educational Resources Information Center

Britt, Ronda

2006-01-01

Industrial funding for research and development in academic science and engineering (S&E) dropped by 2.6 percent in FY 2004, the third consecutive year of declining support from this sector, according to data from the National Science Foundation (NSF) Survey of Research and Development Expenditures at Universities and Colleges (table 1). The…

Modeling and simulation: A key to future defense technology

NASA Technical Reports Server (NTRS)

Muccio, Anthony B.

1993-01-01

The purpose of this paper is to express the rationale for continued technological and scientific development of the modeling and simulation process for the defense industry. The defense industry, along with a variety of other industries, is currently being forced into making sacrifices in response to the current economic hardships. These sacrifices, which may not compromise the safety of our nation, nor jeopardize our current standing as the world peace officer, must be concentrated in areas which will withstand the needs of the changing world. Therefore, the need for cost effective alternatives of defense issues must be examined. This paper provides support that the modeling and simulation process is an economically feasible process which will ensure our nation's safety as well as provide and keep up with the future technological developments and demands required by the defense industry. The outline of this paper is as follows: introduction, which defines and describes the modeling and simulation process; discussion, which details the purpose and benefits of modeling and simulation and provides specific examples of how the process has been successful; and conclusion, which summarizes the specifics of modeling and simulation of defense issues and lends the support for its continued use in the defense arena.

Scientific Research and Corporate Influence: Smoking, Mental Illness, and the Tobacco Industry

PubMed Central

Hirshbein, Laura

2012-01-01

Mentally ill individuals have always smoked at high rates and continue to do so, despite public health efforts to encourage smoking cessation. In the last half century, the tobacco industry became interested in this connection, and conducted and supported psychiatric and basic science research on the mental health implications of smoking, long before most mental health professionals outside the industry investigated this issue. Initially, representatives of tobacco industry research organizations supported genetics and psychosomatic research to try to disprove findings that smoking causes lung cancer. Tobacco industry research leaders engaged with investigators because of shared priorities and interests in the brain effects of nicotine. By the 1980s, collaborative funding programs and individual company research and development teams engaged in intramural and extramural basic science studies on the neuropharmacology of nicotine. When mental health researchers outside the industry became interested in the issue of the mentally ill and smoking in the mid-1990s, they increasingly explained it in terms of a disease of nicotine addiction. Both the idea that smoking/nicotine does something positive for the mentally ill and the conclusion that it is the result of nicotine dependence have the potential to support corporate agendas (tobacco or pharmaceutical). PMID:21596723

Scientific research and corporate influence: smoking, mental illness, and the tobacco industry.

PubMed

Hirshbein, Laura

2012-07-01

Mentally ill individuals have always smoked at high rates and continue to do so, despite public health efforts to encourage smoking cessation. In the last half century, the tobacco industry became interested in this connection, and conducted and supported psychiatric and basic science research on the mental health implications of smoking, long before most mental health professionals outside the industry investigated this issue. Initially, representatives of tobacco industry research organizations supported genetics and psychosomatic research to try to disprove findings that smoking causes lung cancer. Tobacco industry research leaders engaged with investigators because of shared priorities and interests in the brain effects of nicotine. By the 1980s, collaborative funding programs and individual company research and development teams engaged in intramural and extramural basic science studies on the neuropharmacology of nicotine. When mental health researchers outside the industry became interested in the issue of the mentally ill and smoking in the mid-1990s, they increasingly explained it in terms of a disease of nicotine addiction. Both the idea that smoking/nicotine does something positive for the mentally ill and the conclusion that it is the result of nicotine dependence have the potential to support corporate agendas (tobacco or pharmaceutical).

Controlling Quality in CME/CPD by Measuring and Illuminating Bias

ERIC Educational Resources Information Center

Dixon, David; Takhar, Jatinder; Macnab, Jennifer; Eadie, Jason; Lockyer, Jocelyn; Stenerson, Heather; Francois, Jose; Bell, Mary; Monette, Celine; Campbell, Craig; Marlow, Bernie

2011-01-01

Introduction: There has been a surge of interest in the area of bias in industry-supported continuing medical education/continuing professional development (CME/CPD) activities. In 2007, we published our first study on measuring bias in CME, demonstrating that our assessment tool was valid and reliable. In light of the increasing interest in this…

NRL Fact Book

DTIC Science & Technology

2004-12-31

and engineers work together with industry , academia, state or local governments, or other Federal agencies to develop NRL technologies for government...http://www.nrl.navy.mil) annually. It is printed every other year. NRL has a continuing need for physical scientists, mathematicians, engineers , and...listed for each activity. NRL has a continuing need for physical scientists, mathematicians, engineers , and support personnel. Vacancies are filled

Continuing professional education: Status, trends, and issues related to electronic delivery

NASA Technical Reports Server (NTRS)

Rothenberg, D.

1975-01-01

Four professional groups, teachers, doctors, lawyers, and engineers were examined to determine if they constitute a potential market for continuing professional education via large scale electronic technology. Data were collected in view of social and economic forces, such as mandatory periodic relicensure, additional course requirements for certification, or the economic health of supporting industries.

A toolbox for safety instrumented system evaluation based on improved continuous-time Markov chain

NASA Astrophysics Data System (ADS)

Wardana, Awang N. I.; Kurniady, Rahman; Pambudi, Galih; Purnama, Jaka; Suryopratomo, Kutut

2017-08-01

Safety instrumented system (SIS) is designed to restore a plant into a safe condition when pre-hazardous event is occur. It has a vital role especially in process industries. A SIS shall be meet with safety requirement specifications. To confirm it, SIS shall be evaluated. Typically, the evaluation is calculated by hand. This paper presents a toolbox for SIS evaluation. It is developed based on improved continuous-time Markov chain. The toolbox supports to detailed approach of evaluation. This paper also illustrates an industrial application of the toolbox to evaluate arch burner safety system of primary reformer. The results of the case study demonstrates that the toolbox can be used to evaluate industrial SIS in detail and to plan the maintenance strategy.

The Fame of Sharkey Clay

Treesearch

W. M. Broadfoot

1962-01-01

Sharkey clay is now important to the Southern forest industry because it supports so much of the hardwood resource-more than any other soil within the Mississippi Delta-and its extent will continue to make it important to Delta forestry.

Defense Industrial Base: An Overview of an Emerging Issue

DTIC Science & Technology

1993-03-01

supplies it needs to rapidly increase the production of weapons and supporting equipment in wartime. This lack of access is primarily considered a...ommittete on Technology and Securily , ,Joint Econonue Committee, we are attempting Io develop a proposed analytical framework for assessing the national...industry’s continuing ability to develop and produce weapon systems using the most advanced technology. According to recent studies, a growing number

History of Fire Events in the U.S. Commercial Nuclear Industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bijan Najafi; Joglar-Biloch, Francisco; Kassawara, Robert P.

2002-07-01

Over the past decade, interest in performance-based fire protection has increased within the nuclear industry. In support of this growing interest, in 1997 the Electric Power Research Institute (EPRI) developed a long-range plan to develop/improve data and tools needed to support Risk-Informed/Performance-Based fire protection. This plan calls for continued improvement in collection and use of information obtained from fire events at nuclear plants. The data collection process has the objectives of improving the insights gained from such data and reducing the uncertainty in fire risk and fire modeling methods in order to make them a more reliable basis for performancemore » based fire protection programs. In keeping with these objectives, EPRI continues to collect, review and analyze fire events in support of the nuclear industry. EPRI collects these records in cooperation with the Nuclear Electric Insurance Limited (NEIL), by compiling public fire event reports and by direct solicitation of U.S. nuclear facilities. EPRI fire data collection project is based on the principle that the understanding of history is one of the cornerstones of improving fire protection technology and practice. Therefore, the goal has been to develop and maintain a comprehensive database of fire events with flexibility to support various aspects of fire protection engineering. With more than 1850 fire records over a period of three decades and 2400 reactor years, this is the most comprehensive database of nuclear power industry fire events in existence today. In general, the frequency of fires in the U.S. commercial nuclear industry remains constant. In few cases, e.g., transient fires and fires in BWR offgas/recombiner systems, where either increasing or decreasing trends are observed, these trends tend to slow after 1980. The key issues in improving quality of the data remain to be consistency of the recording and reporting of fire events and difficulties in collection of records. EPRI has made significant progress towards improving the quality of the fire events data through use of multiple collection methods as well as its review and verification. To date EPRI has used this data to develop a generic fire ignition frequency model for U.S. nuclear power industry (Ref. 1, 4 and 5) as well as to support other models in support of EPRI Fire Risk Methods such as a cable fire manual suppression model. EPRI will continue its effort to collect and analyze operating data to support risk informed/performance based fire safety engineering, including collection and analysis of impairment data for fire protection systems and features. This paper provides details on the collection and application of fire events to risk informed/performance based fire protection. The paper also provides valuable insights into improving both collection and use of fire events data. (authors)« less

[Conflict of interest regarding clinical physicians' relationship with pharmaceutical industry and medical education].

PubMed

Miyata, Yasushi

2010-01-01

The relationship between clinical physicians and the pharmaceutical industry is becoming an important social issue. Many lawsuits against drug companies in the area of psychiatric medicine have been heavily covered by the mass media in the U.S., and the injustices of drug companies and clinical physicians have been revealed in court. Although there are few such large social issues in Japan, the relationship between clinical physicians and the pharmaceutical industry in Japan appears inappropriate. A study on the relationship between Japanese clinical physicians and the pharmaceutical industry revealed that many physicians received "gifts" from pharmaceutical companies. This is one form of evidence for the inappropriate relationship between Japanese physicians and pharmaceutical industries. Recently, many recommendations to realize an appropriate relationship between physicians and the pharmaceutical industry have been published in the U.S. However, discussion concerning the relationship between clinical physicians and pharmaceutical companies in Japan is not active. We have received a lot of financial support for continuing medical education from pharmaceutical industries. Without such support, we may not be able to maintain the same level of medical education. Understanding such present conditions, we need to discuss what is an appropriate relationship between clinical physicians and the pharmaceutical industry.

Mask Industry Assessment: 2011

NASA Astrophysics Data System (ADS)

Chan, Y. David

2011-11-01

A survey supported by SEMATECH and administered by David Powell Consulting was sent to microelectronics industry leaders to gather information about the mask industry as an objective assessment of its overall condition. The survey was designed with the input of semiconductor company mask technologists and merchant mask suppliers. This year's assessment is the tenth in the current series of annual reports. With ongoing industry support, the report has been used as one of the baselines to gain perspective on the technical and business status of the mask and microelectronics industries. It continues to serve as a valuable reference to identify the strengths and opportunities of the mask industry. The results will be used to guide future investments pertaining to critical path issues. This year's survey was essentially the same as the 2005 through 2010 surveys. Questions are grouped into following categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category are multiple questions that result in a detailed profile of both the business and technical status of the critical mask industry. This profile combined with the responses to past surveys represents a comprehensive view of changes in the industry.

Mask industry assessment: 2008

NASA Astrophysics Data System (ADS)

Hughes, Greg; Yun, Henry

2008-10-01

Microelectronics industry leaders routinely name the cost and cycle time of mask technology and mask supply as top critical issues. A survey was created with support from SEMATECH and administered by David Powell Consulting to gather information about the mask industry as an objective assessment of its overall condition. The survey is designed with the input of semiconductor company mask technologists, merchant mask suppliers, and industry equipment makers. This year's assessment is the seventh in the current series of annual reports. With ongoing industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. The report will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. The results will be used to guide future investments pertaining to critical path issues. This year's survey is basically the same as the 2005 through 2007 surveys. Questions are grouped into categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category is a multitude of questions that create a detailed profile of both the business and technical status of the critical mask industry.

Mask Industry Assessment: 2010

NASA Astrophysics Data System (ADS)

Hughes, Greg; Chan, David Y.

2010-09-01

A survey created supported by SEMATECH and administered by David Powell Consulting was sent to microelectronics industry leaders to gather information about the mask industry as an objective assessment of its overall condition. The survey was designed with the input of semiconductor company mask technologists and merchant mask suppliers. This year's assessment is the ninth in the current series of annual reports. With ongoing industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. It will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. The results will be used to guide future investments pertaining to critical path issues. This year's survey was basically the same as the 2005 through 2009 surveys. Questions are grouped into categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category are multiple questions that result in a detailed profile of both the business and technical status of the critical mask industry. This profile combined with the responses to past surveys represents a comprehensive view of changes in the industry.

Achieving continuous manufacturing: technologies and approaches for synthesis, workup, and isolation of drug substance. May 20-21, 2014 Continuous Manufacturing Symposium.

PubMed

Baxendale, Ian R; Braatz, Richard D; Hodnett, Benjamin K; Jensen, Klavs F; Johnson, Martin D; Sharratt, Paul; Sherlock, Jon-Paul; Florence, Alastair J

2015-03-01

This whitepaper highlights current challenges and opportunities associated with continuous synthesis, workup, and crystallization of active pharmaceutical ingredients (drug substances). We describe the technologies and requirements at each stage and emphasize the different considerations for developing continuous processes compared with batch. In addition to the specific sequence of operations required to deliver the necessary chemical and physical transformations for continuous drug substance manufacture, consideration is also given to how adoption of continuous technologies may impact different manufacturing stages in development from discovery, process development, through scale-up and into full scale production. The impact of continuous manufacture on drug substance quality and the associated challenges for control and for process safety are also emphasized. In addition to the technology and operational considerations necessary for the adoption of continuous manufacturing (CM), this whitepaper also addresses the cultural, as well as skills and training, challenges that will need to be met by support from organizations in order to accommodate the new work flows. Specific action items for industry leaders are: Develop flow chemistry toolboxes, exploiting the advantages of flow processing and including highly selective chemistries that allow use of simple and effective continuous workup technologies. Availability of modular or plug and play type equipment especially for workup to assist in straightforward deployment in the laboratory. As with learning from other industries, standardization is highly desirable and will require cooperation across industry and academia to develop and implement. Implement and exploit process analytical technologies (PAT) for real-time dynamic control of continuous processes. Develop modeling and simulation techniques to support continuous process development and control. Progress is required in multiphase systems such as crystallization. Involve all parts of the organization from discovery, research and development, and manufacturing in the implementation of CM. Engage with academia to develop the training provision to support the skills base for CM, particularly in flow chemistry, physical chemistry, and chemical engineering skills at the chemistry-process interface. Promote and encourage publication and dissemination of examples of CM across the sector to demonstrate capability, engage with regulatory comment, and establish benchmarks for performance and highlight challenges. Develop the economic case for CM of drug substance. This will involve various stakeholders at project and business level, however establishing the critical economic drivers is critical to driving the transformation in manufacturing. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

Materials Research Capabilities

NASA Technical Reports Server (NTRS)

Stofan, Andrew J.

1986-01-01

Lewis Research Center, in partnership with U.S. industry and academia, has long been a major force in developing advanced aerospace propulsion and power systems. One key aspect that made many of these systems possible has been the availability of high-performance, reliable, and long-life materials. To assure a continuing flow of new materials and processing concepts, basic understanding to guide such innovation, and technological support for development of major NASA systems, Lewis has supported a strong in-house materials research activity. Our researchers have discovered new alloys, polymers, metallic composites, ceramics, coatings, processing techniques, etc., which are now also in use by U.S. industry. This brochure highlights selected past accomplishments of our materials research and technology staff. It also provides many examples of the facilities available with which we can conduct materials research. The nation is now beginning to consider integrating technology for high-performance supersonic/hypersonic aircraft, nuclear space power systems, a space station, and new research areas such as materials processing in space. As we proceed, I am confident that our materials research staff will continue to provide important contributions which will help our nation maintain a strong technology position in these areas of growing world competition. Lewis Research Center, in partnership with U.S. industry and academia, has long been a major force in developing advanced aerospace propulsion and power systems. One key aspect that made many of these systems possible has been the availability of high-performance, reliable, and long-life materials. To assure a continuing flow of new materials and processing concepts, basic understanding to guide such innovation, and technological support for development of major NASA systems, Lewis has supported a strong in-house materials research activity. Our researchers have discovered new alloys, polymers, metallic composites, ceramics, coatings, processing techniques, etc., which are now also in use by U.S. industry. This brochure highlights selected past accomplishments of our materials research and technology staff. It also provides many examples of the facilities available with which we can conduct materials research. The nation is now beginning to consider integrating technology for high-performance supersonic/hypersonic aircraft, nuclear space power systems, a space station, and new research areas such as materials processing in space.

[From the design of use study to the assessment of the benefit: with or without pharmaceutical industry?].

PubMed

Porzsolt, Franz

2010-12-01

The financing of clinical studies by the pharmaceutical industry is a controversial topic both internationally and in here in Germany. The well-known unacceptable shortcomings require no further confirmation. It is, however, indisputable that the pharmaceutical industry and medical science are co-dependent. Neither the marketing of industrial products nor the research and education of clinical scientists could function without this cooperation. Therefore, all partners need suggestions concerning goal orientation and consensus. The aim of this discussion is to formulate just such suggestions. To structure this discussion, we have raised the following questions: Must we always be suspicious of the results of studies financed by the pharmaceutical industry? We have to keep in mind that in Germany all clinical trials leading to approval of a drug were supported by the industry. What, exactly, do we want to achieve with our explicit and often justified criticism of these studies? What should be done to achieve a higher validity of the published data if we avoid answering the decisive question of whether we accept the challenge of continuing to let research and teaching be financed by the pharmaceutical industry or reject this kind of cooperation and support altogether.

IT Knowledge Requirements Identification in Organizational Networks: Cooperation Between Industrial Organizations and Universities

NASA Astrophysics Data System (ADS)

Rudzajs, Peteris; Kirikova, Marite

ICT professionals face rapid technology development, changes in design paradigms, methodologies, approaches, and cooperation patterns. These changes impact relationships between universities that teach ICT disciplines and industrial organizations that develop and use ICT-based products. The required knowledge and skills of university graduates depend mainly on the current industrial situation; therefore the university graduates have to meet industry requirements which are stated at the time point of their graduation, not at the start of their studies. Continuous cooperation between universities and industrial organizations is needed to identify a time and situation-dependent set of knowledge requirements, which lead to situation aware, industry acknowledged, balanced and productive ICT study programs. This chapter proposes information systems solutions supporting cooperation between the university and the industrial organizations with respect to curriculum development in ICT area.

Space nuclear power: Key to outer solar system exploration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, G.L.; Allen, D.M.

1998-07-01

In 1995, in response to threatened budget cuts, the American Institute of Aeronautics and Astronautics (AIAA) approved a position paper supporting the maintenance of the technology base for space nuclear power. The position paper contained four recomemndations: (1) DOE, NASA, and DoD should develop and support an integrated program that maintains the nuclear option and develops the needed high-payoff technologies; (2) Congress should provide strong, continuing financial and political support for the agencies' program; (3) Government and industry leaders should voice their advocacy for a strong space nuclear power program to support future system requirements; and (4) The US shouldmore » continue to maintain its cooperation and technical interchanges with other countries to advance nuclear power source technology and to promote nuclear safety.« less

Key water issues now facing our nation

USGS Publications Warehouse

Hirsch, Robert M.; Miller, Timothy L.; Hamilton, Pixie A.; Gilliom, Robert J.

2008-01-01

Challenges to sustaining sufficient and high-quality water for human consumption, industry, farms, energy production, and ecosystem services continue to intensify in many parts of the Nation. We face four key water issues that call for support from the science and engineering communities.

"Below the Line": The tobacco industry and youth smoking.

PubMed

Coombs, Jaimee; Bond, Laura; Van, Victoria; Daube, Mike

2011-01-01

This paper provides a comprehensive account of how the tobacco industry, over time, has promoted its products to young people. A comprehensive search of tobacco industry documents relating to youth smoking was conducted using documents available on the World Wide Web through the Master Settlement Agreement. The documents provide evidence that the industry invested great time and resources in developing strategies to attract young people through Youth Smoking Prevention strategies (including education strategies) and marketing to youth. The results include information from published literature and direct excerpts from the tobacco industry documents. The tobacco industry documents confirm that the tobacco industry has promoted and supported strategies that are ineffective in reducing smoking by youth, and opposed strategies that have proven to be effective. It is clear from the documents reviewed that the industry values the youth market and through a number of measures continues to promote its products to young people.

Tobacco industry efforts to undermine policy-relevant research.

PubMed

Landman, Anne; Glantz, Stanton A

2009-01-01

The tobacco industry, working through third parties to prevent policy-relevant research that adversely affected it between 1988 and 1998, used coordinated, well-funded strategies in repeated attempts to silence tobacco researcher Stanton A. Glantz. Tactics included advertising, litigation, and attempts to have the US Congress cut off the researcher's National Cancer Institute funding. Efforts like these can influence the policymaking process by silencing opposing voices and discouraging other scientists from doing work that may expose them to tobacco industry attacks. The support of highly credible public health organizations and of researchers' employers is crucial to the continued advancement of public health.

Mask industry assessment: 2009

NASA Astrophysics Data System (ADS)

Hughes, Greg; Yun, Henry

2009-10-01

Microelectronics industry leaders routinely name the cost and cycle time of mask technology and mask supply as top critical issues. A survey was created with support from SEMATECH and administered by David Powell Consulting to gather information about the mask industry as an objective assessment of its overall condition. The survey is designed with the input of semiconductor company mask technologists and merchant mask suppliers. This year's assessment is the eighth in the current series of annual reports. With ongoing industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. The report will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. The results will be used to guide future investments pertaining to critical path issues. This year's survey is basically the same as the 2005 through 2008 surveys. Questions are grouped into categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category is a multitude of questions that create a detailed profile of both the business and technical status of the critical mask industry. This in combination with the past surveys represents a comprehensive view of changes in the industry.

Decision support systems in water and wastewater treatment process selection and design: a review.

PubMed

Hamouda, M A; Anderson, W B; Huck, P M

2009-01-01

The continuously changing drivers of the water treatment industry, embodied by rigorous environmental and health regulations and the challenge of emerging contaminants, necessitates the development of decision support systems for the selection of appropriate treatment trains. This paper explores a systematic approach to developing decision support systems, which includes the analysis of the treatment problem(s), knowledge acquisition and representation, and the identification and evaluation of criteria controlling the selection of optimal treatment systems. The objective of this article is to review approaches and methods used in decision support systems developed to aid in the selection, sequencing of unit processes and design of drinking water, domestic wastewater, and industrial wastewater treatment systems. Not surprisingly, technical considerations were found to dominate the logic of the developed systems. Most of the existing decision-support tools employ heuristic knowledge. It has been determined that there is a need to develop integrated decision support systems that are generic, usable and consider a system analysis approach.

Principles and Guidelines for Duty and Rest Scheduling in Commercial Aviation

NASA Technical Reports Server (NTRS)

Dinges, David F.; Graeber, R. Curtis; Rosekind, Mark R.; Samel, Alexander

1996-01-01

The aviation industry requires 24-hour activities to meet operational demands. Growth in global long-haul, regional, overnight cargo, and short-haul domestic operations will continue to increase these round-the-clock requirements. Flight crews must be available to support 24-hour-a-day operations to meet these industry demands. Both domestic and international aviation can also require crossing multiple time zones. Therefore, shift work, night work, irregular work schedules, unpredictable work schedules, and dm zone changes will continue to be commonplace components of the aviation industry. These factors pose known challenges to human physiology, and because they result in performance-impairing fatigue, they pose a risk to safety. It is critical to acknowledge and, whenever possible, incorporate scientific information on fatigue, human sleep, and circadian physiology into 24-hour aviation operations. Utilization of such scientific information can help promote crew performance and alertness during flight operations and thereby maintain and improve the safety margin.

Mask industry assessment trend analysis: 2012

NASA Astrophysics Data System (ADS)

Chan, Y. David

2012-02-01

Microelectronics industry leaders consistently cite the cost and cycle time of mask technology and mask supply among the top critical issues for lithography. A survey was designed by SEMATECH with input from semiconductor company mask technologists and merchant mask suppliers to objectively assess the overall conditions of the mask industry. With the continued support of the industry, this year's assessment was the tenth in the current series of annual reports. This year's survey is basically the same as the 2005 through 2011 surveys. Questions are grouped into six categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category is a multitude of questions that ultimately produce a detailed profile of both the business and technical status of the critical mask industry. We received data from 11 companies this year, which was a record high since the beginning of the series. The responding companies represented more than 96% of the volume shipped and about 90% of the 2011 revenue for the photomask industry. These survey reports are often used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. They will continue to serve as a valuable reference to identify strengths and opportunities. Results can also be used to guide future investments in critical path issues.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 42: An analysis of the transfer of Scientific and Technical Information (STI) in the US aerospace industry

NASA Technical Reports Server (NTRS)

Kennedy, John M.; Pinelli, Thomas E.; Hecht, Laura F.; Barclay, Rebecca O.

1994-01-01

The U.S. aerospace industry has a long history of federal support for research related to its needs. Since the establishment of the National Advisory Committee for Aeronautics (NACA) in 1915, the federal government has provided continuous research support related to flight and aircraft design. This research has contributed to the international preeminence of the U.S. aerospace industry. In this paper, we present a sociological analysis of aerospace engineers and scientists and how their attitudes and behaviors impact the flow of scientific and technical information (STI). We use a constructivist framework to explain the spotty dissemination of federally funded aerospace research. Our research is aimed towards providing federal policymakers with a clearer understanding of how and when federally funded aerospace research is used. This understanding will help policymakers design improved information transfer systems that will aid the competitiveness of the U.S. aerospace industry.

The role of academic institutions in the development of drugs for rare and neglected diseases.

PubMed

Coles, L D; Cloyd, J C

2012-08-01

There are approximately 7,000 rare disorders, many of which are life-threatening. Diagnosis is often problematic, and therapies are few. Before the passage of the Orphan Drug Act in 1983, neither the pharmaceutical industry nor universities devoted much effort to research on rare diseases. Important changes have occurred within and outside universities that position them to play a significant role in developing orphan drugs. Several models are being employed to promote drug-related research, including disease-focused, discovery-focused, development-focused, and industry-partnership-focused approaches. However, significant barriers challenge universities' ability to fully contribute to orphan drug development. Academic institutions, along with industry, government, and not-for-profit organizations, must address these issues in order to advance the field. New initiatives designed to increase university-based orphan drug research include creating mechanisms to ensure program continuity, building research and regulatory support infrastructure, facilitating commercialization, expanding government support, and developing mutually beneficial partnerships among academe, industry, and government.

Old age income security in Canada.

PubMed

Willard, J W

1965-10-09

The position of older people in modern industrial society is markedly removed from the early industrial norm of continued participation in gainful employment until the end of life. Acceptance of a retirement age some 13 years before the end of average male life expectancy has brought with it serious social problems. At the same time, however, an increasingly productive economy has provided both the willingness and ability to complement the retirement provisions of individual initiative with public programs of old age income maintenance. This public support began in Canada with the voluntary approach embodied in the government annuities plan. A program of "public assistance" followed. These were succeeded, first, by the "universal payment" under the Old Age Security Act and, more recently, by the social insurance approach of the Canada Pension Plan. Along with improved public support, the role of occupational pension plans and of individually initiated retirement provisions continues to be substantial. Current interest in, and in some cases legislation on, such problems as vesting and solvency are leading to improvements in private pension programs.

Geothermal Progress Monitor, report No. 13

NASA Astrophysics Data System (ADS)

1992-02-01

Geothermal Progress Monitor (GPM) Issue No. 13 documents that most related factors favor the growth and geographic expansion of the US geothermal industry and that the industry is being technologically prepared to meet those challenges into the next century. It is the function of GPM to identify trends in the use of this resource and to provide a historical record of its development pathway. The information assembled for this issue of GPM indicates that trends in the use of geothermal energy in this country and abroad continue to be very positive. Favorable sentiments as well as pertinent actions on the part of both government and industry are documented in almost every section. The FEDERAL BEAT points up that the National Energy Strategy (NES) developed at the highest levels of the US government recognizes the environmental and energy security advantages of renewable energy, including geothermal, and makes a commitment to 'substantial diversification' of US sources of energy. With the announcement of the construction of several new plants and plant expansions, the INDUSTRY SCENE illustrates industry's continued expectation that the use of geothermal energy will prove profitable to investors. In DEVELOPMENT STATUS, spokesmen for both an investor-owned utility and a major geothermal developer express strong support for geothermal power, particularly emphasizing its environmental advantages. DEVELOPMENT STATUS also reports that early successes have been achieved by joint DOE/industry R & D at The Geysers which will have important impacts on the future management of this mature field. Also there is increasing interest in hot dry rock. Analyses conducted in support of the NES indicate that if all the postulated technology developments occur in this field, the price of energy derived from hot dry rock in the US could drop.

Process Improvements in Training Device Acceptance Testing: A Study in Total Quality Management

DTIC Science & Technology

1990-12-12

Quality Management , a small group of Government and industry specialists examined the existing training device acceptance test process for potential improvements. The agreed-to mission of the Air Force/Industry partnership was to continuously identify and promote implementable approaches to minimize the cost and time required for acceptance testing while ensuring that validated performance supports the user training requirements. Application of a Total Quality process improvement model focused on the customers and their requirements, analyzed how work was accomplished, and

Moving research to patient applications through commercialization: understanding and evaluating the role of intellectual property.

PubMed

Patino, Robert M

2010-03-01

The advancement of research from discovery to the delivery of medical care can be limited without the support of industry to sponsor its continued development. Federal government financial support is generally crucial in early-stage development through funding from the NIH, National Science Foundation, and other federal agencies; however, government support generally stops shortly after basic research discoveries have been reported. Much of the cessation of financial support derives from the government's regulatory responsibilities, as sponsoring the commercialization of a product conflicts with regulation of the approval for clinical use of a drug or device. Furthermore, differences in goals, resources, and flexibility render government, as compared with private industry, inefficient and less responsive to market demands with regard to stream-lining the development of and enhancing the quality of products and services offered. Thus, industry and private investment provide the bridge that converts new discoveries into healthcare products that are available to consumers and patients. This conversion occurs through commercialization, which involves both high risks and high rewards. Taking advantage of the commercialization option for research development requires an understanding of the technology transfer process. This article reviews 5 topics: 1) industry motivation to invest in academic research; 2) institutional considerations in partnering with industry; 3) academia's interactions with inventors in the commercialization process; 4) the research institution's route to commercialization, and 5) the role of intellectual property and commercialization in the advancement of healthcare.

Moving Research to Patient Applications through Commercialization: Understanding and Evaluating the Role of Intellectual Property

PubMed Central

2010-01-01

The advancement of research from discovery to the delivery of medical care can be limited without the support of industry to sponsor its continued development. Federal government financial support is generally crucial in early-stage development through funding from the NIH, National Science Foundation, and other federal agencies; however, government support generally stops shortly after basic research discoveries have been reported. Much of the cessation of financial support derives from the government's regulatory responsibilities, as sponsoring the commercialization of a product conflicts with regulation of the approval for clinical use of a drug or device. Furthermore, differences in goals, resources, and flexibility render government, as compared with private industry, inefficient and less responsive to market demands with regard to stream-lining the development of and enhancing the quality of products and services offered. Thus, industry and private investment provide the bridge that converts new discoveries into healthcare products that are available to consumers and patients. This conversion occurs through commercialization, which involves both high risks and high rewards. Taking advantage of the commercialization option for research development requires an understanding of the technology transfer process. This article reviews 5 topics: 1) industry motivation to invest in academic research; 2) institutional considerations in partnering with industry; 3) academia's interactions with inventors in the commercialization process; 4) the research institution's route to commercialization, and 5) the role of intellectual property and commercialization in the advancement of healthcare. PMID:20353687

Relations between professional medical associations and healthcare industry, concerning scientific communication and continuing medical education: a policy statement from the European Society of Cardiology.

PubMed

2012-01-01

Physicians have an ethical duty to keep up-to-date with current knowledge. Professional medical associations such as the European Society of Cardiology (ESC) support these obligations. In Europe, the costs of continuing medical education (CME) are insufficiently supported from governments and employers; however, medical associations have been criticized for accepting alternative financial support from industry. Medical education and training in research include learning how to assess the quality and reliability of any information. There is some risk of bias in any form of scientific communication including intellectual, professional, and financial and it is essential that in particular, the latter must be acknowledged by full disclosure. It is essential that there is strong collaboration between basic and clinical researchers from academic institutions on the one hand, with engineers and scientists from the research divisions of device and pharmaceutical companies on the other. This is vital so that new diagnostic methods and treatments are developed. Promotion of advances by industry may accelerate their implementation into clinical practice. Universities now frequently exhort their academic staff to protect their intellectual property or commercialize their research. Thus, it is not commercial activity or links per se that have become the target for criticism but the perceived influence of commercial enterprises on clinical decision-making or on messages conveyed by professional medical organizations. This document offers the perspective of the ESC on the current debate, and it recommends how to minimize bias in scientific communications and CME and how to ensure proper ethical standards and transparency in relations between the medical profession and industry. Copyright © 2012. Published by Elsevier España.

Relations between professional medical associations and the health-care industry, concerning scientific communication and continuing medical education: a policy statement from the European Society of Cardiology.

PubMed

2012-06-01

Physicians have an ethical duty to keep up-to-date with current knowledge. Professional medical associations such as the European Society of Cardiology (ESC) support these obligations. In Europe, the costs of continuing medical education (CME) are insufficiently supported from governments and employers; however, medical associations have been criticized for accepting alternative financial support from industry. Medical education and training in research include learning how to assess the quality and reliability of any information. There is some risk of bias in any form of scientific communication including intellectual, professional, and financial and it is essential that in particular, the latter must be acknowledged by full disclosure. It is essential that there is strong collaboration between basic and clinical researchers from academic institutions on the one hand, with engineers and scientists from the research divisions of device and pharmaceutical companies on the other. This is vital so that new diagnostic methods and treatments are developed. Promotion of advances by industry may accelerate their implementation into clinical practice. Universities now frequently exhort their academic staff to protect their intellectual property or commercialize their research. Thus, it is not commercial activity or links per se that have become the target for criticism but the perceived influence of commercial enterprises on clinical decision-making or on messages conveyed by professional medical organizations. This document offers the perspective of the ESC on the current debate, and it recommends how to minimize bias in scientific communications and CME and how to ensure proper ethical standards and transparency in relations between the medical profession and industry.

Relations between professional medical associations and the health-care industry, concerning scientific communication and continuing medical education: a Policy Statement from the European Society of Cardiology.

PubMed

2012-03-01

Physicians have an ethical duty to keep up-to-date with current knowledge. Professional medical associations such as the European Society of Cardiology (ESC) support these obligations. In Europe, the costs of continuing medical education (CME) are insufficiently supported from governments and employers; however, medical associations have been criticized for accepting alternative financial support from industry. Medical education and training in research include learning how to assess the quality and reliability of any information. There is some risk of bias in any form of scientific communication including intellectual, professional, and financial and it is essential that in particular, the latter must be acknowledged by full disclosure. It is essential that there is strong collaboration between basic and clinical researchers from academic institutions on the one hand, with engineers and scientists from the research divisions of device and pharmaceutical companies on the other. This is vital so that new diagnostic methods and treatments are developed. Promotion of advances by industry may accelerate their implementation into clinical practice. Universities now frequently exhort their academic staff to protect their intellectual property or commercialize their research. Thus, it is not commercial activity or links per se that have become the target for criticism but the perceived influence of commercial enterprises on clinical decision-making or on messages conveyed by professional medical organizations. This document offers the perspective of the ESC on the current debate, and it recommends how to minimize bias in scientific communications and CME and how to ensure proper ethical standards and transparency in relations between the medical profession and industry.

Education and the Sony War.

ERIC Educational Resources Information Center

Spring, Joel

1984-01-01

There is little evidence to support the view that schools are responsible for economic problems and/or that they are the key to solving them. As long as such views remain dominant, however, American educational goals will continue to be captive to the profit motive of American industry. (JBM)

76 FR 80884 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-27

...) program, administered by the Office of Travel and Tourism Industries (OTTI) of the International Trade..., 1961, 1981, and 1996 travel and tourism related acts to collect and publish comprehensive international travel and tourism statistics and other marketing information, and (4) support the continuation of the...

National research and education network

NASA Technical Reports Server (NTRS)

Villasenor, Tony

1991-01-01

Some goals of this network are as follows: Extend U.S. technological leadership in high performance computing and computer communications; Provide wide dissemination and application of the technologies both to the speed and the pace of innovation and to serve the national economy, national security, education, and the global environment; and Spur gains in the U.S. productivity and industrial competitiveness by making high performance computing and networking technologies an integral part of the design and production process. Strategies for achieving these goals are as follows: Support solutions to important scientific and technical challenges through a vigorous R and D effort; Reduce the uncertainties to industry for R and D and use of this technology through increased cooperation between government, industry, and universities and by the continued use of government and government funded facilities as a prototype user for early commercial HPCC products; and Support underlying research, network, and computational infrastructures on which U.S. high performance computing technology is based.

Tobacco Industry Efforts to Undermine Policy-Relevant Research

PubMed Central

Landman, Anne

2009-01-01

The tobacco industry, working through third parties to prevent policy-relevant research that adversely affected it between 1988 and 1998, used coordinated, well-funded strategies in repeated attempts to silence tobacco researcher Stanton A. Glantz. Tactics included advertising, litigation, and attempts to have the US Congress cut off the researcher's National Cancer Institute funding. Efforts like these can influence the policymaking process by silencing opposing voices and discouraging other scientists from doing work that may expose them to tobacco industry attacks. The support of highly credible public health organizations and of researchers’ employers is crucial to the continued advancement of public health. PMID:19008508

15 CFR 748.9 - Support documents for license applications.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Foreign Aid, U.S. Agency for International Development, for export to a member agency in the foreign... circumstances beyond your control. An exception will not be granted contrary to the objectives of the U.S... (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE EXPORT ADMINISTRATION REGULATIONS...

15 CFR 748.9 - Support documents for license applications.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Foreign Aid, U.S. Agency for International Development, for export to a member agency in the foreign... circumstances beyond your control. An exception will not be granted contrary to the objectives of the U.S... (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE EXPORT ADMINISTRATION REGULATIONS...

15 CFR 748.9 - Support documents for license applications.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Foreign Aid, U.S. Agency for International Development, for export to a member agency in the foreign... circumstances beyond your control. An exception will not be granted contrary to the objectives of the U.S... (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE EXPORT ADMINISTRATION REGULATIONS...

Optimizing Web-Based Instruction: A Case Study Using Poultry Processing Unit Operations

ERIC Educational Resources Information Center

O' Bryan, Corliss A.; Crandall, Philip G.; Shores-Ellis, Katrina; Johnson, Donald M.; Ricke, Steven C.; Marcy, John

2009-01-01

Food companies and supporting industries need inexpensive, revisable training methods for large numbers of hourly employees due to continuing improvements in Hazard Analysis Critical Control Point (HACCP) programs, new processing equipment, and high employee turnover. HACCP-based food safety programs have demonstrated their value by reducing the…

Approaches to Identifying the Emerging Innovative Water Technology Industry in the United States.

PubMed

Wood, Allison R; Harten, Teresa; Gutierrez, Sally C

2018-04-25

Clean water is vital to sustaining our natural environment, human health, and our economy. As infrastructure continues to deteriorate and water resources become increasingly threatened, new technologies will be needed to ensure safe and sustainable water in the future. Though the US water industry accounts for approximately 1% gross domestic product and regional "clusters" for water technology exist throughout the country, this emerging industry has not been captured by recent studies. As use of the term "cluster" becomes more prevalent, regional mapping efforts have revealed international differences in definition yet showcase this industry's economic impact. In reality, institutional processes may inhibit altering industry coding to better describe water technology. Forgoing the benefits of national economic tracking, alternative data sets are available, which may support new ways of identifying these clusters. This work provides cluster definitions; summarizes current approaches to identifying industry activity using data, interviews, and literature; and sets a foundation for future research.

Future supply chains enabled by continuous processing--opportunities and challenges. May 20-21, 2014 Continuous Manufacturing Symposium.

PubMed

Srai, Jagjit Singh; Badman, Clive; Krumme, Markus; Futran, Mauricio; Johnston, Craig

2015-03-01

This paper examines the opportunities and challenges facing the pharmaceutical industry in moving to a primarily "continuous processing"-based supply chain. The current predominantly "large batch" and centralized manufacturing system designed for the "blockbuster" drug has driven a slow-paced, inventory heavy operating model that is increasingly regarded as inflexible and unsustainable. Indeed, new markets and the rapidly evolving technology landscape will drive more product variety, shorter product life-cycles, and smaller drug volumes, which will exacerbate an already unsustainable economic model. Future supply chains will be required to enhance affordability and availability for patients and healthcare providers alike despite the increased product complexity. In this more challenging supply scenario, we examine the potential for a more pull driven, near real-time demand-based supply chain, utilizing continuous processing where appropriate as a key element of a more "flow-through" operating model. In this discussion paper on future supply chain models underpinned by developments in the continuous manufacture of pharmaceuticals, we have set out; The significant opportunities to moving to a supply chain flow-through operating model, with substantial opportunities in inventory reduction, lead-time to patient, and radically different product assurance/stability regimes. Scenarios for decentralized production models producing a greater variety of products with enhanced volume flexibility. Production, supply, and value chain footprints that are radically different from today's monolithic and centralized batch manufacturing operations. Clinical trial and drug product development cost savings that support more rapid scale-up and market entry models with early involvement of SC designers within New Product Development. The major supply chain and industrial transformational challenges that need to be addressed. The paper recognizes that although current batch operational performance in pharma is far from optimal and not necessarily an appropriate end-state benchmark for batch technology, the adoption of continuous supply chain operating models underpinned by continuous production processing, as full or hybrid solutions in selected product supply chains, can support industry transformations to deliver right-first-time quality at substantially lower inventory profiles. © 2015 Wiley Periodicals, Inc. and the American Pharmacists Association.

Midwest Nuclear Science and Engineering Consortium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dr. Wynn Volkert; Dr. Arvind Kumar; Dr. Bryan Becker

2010-12-08

The objective of the Midwest Nuclear Science and Engineering Consortium (MNSEC) is to enhance the scope, quality and integration of educational and research capabilities of nuclear sciences and engineering (NS/E) programs at partner schools in support of the U.S. nuclear industry (including DOE laboratories). With INIE support, MNSEC had a productive seven years and made impressive progress in achieving these goals. Since the past three years have been no-cost-extension periods, limited -- but notable -- progress has been made in FY10. Existing programs continue to be strengthened and broadened at Consortium partner institutions. The enthusiasm generated by the academic, state,more » federal, and industrial communities for the MNSEC activities is reflected in the significant leveraging that has occurred for our programs.« less

Section 2: Corrosion and failure analysis studies in support of the pulp and paper industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keiser, J.R.; Pawel, S.J.; Swindeman, R.W.

1997-04-01

Technical support is being provided to various pulp and paper companies and related industries to help determine the cause of material degradation problems and to identify alternate materials to prevent such degradation. During the past year, examinations have included parts from several sootblowers, two failed economizer tubes, and inspection of a continuous digester. The results of the analyses and inspections were communicated to the plant operators, and, in some cases, recommendations were made. This article discusses examination of sootblower nozzles, which evidenced intergranular cracking. Analysis indicated the presence of chromium carbide precipitates along the grain boundaries, which can cause themore » sample to be sensitized to grain boundary attack.« less

New Zealand’s Drug Development Industry

PubMed Central

Lockhart, Michelle Marie; Babar, Zaheer-Ud-Din; Carswell, Christopher; Garg, Sanjay

2013-01-01

The pharmaceutical industry’s profitability depends on identifying and successfully developing new drug candidates while trying to contain the increasing costs of drug development. It is actively searching for new sources of innovative compounds and for mechanisms to reduce the enormous costs of developing new drug candidates. There is an opportunity for academia to further develop as a source of drug discovery. The rising levels of industry outsourcing also provide prospects for organisations that can reduce the costs of drug development. We explored the potential returns to New Zealand (NZ) from its drug discovery expertise by assuming a drug development candidate is out-licensed without clinical data and has anticipated peak global sales of $350 million. We also estimated the revenue from NZ’s clinical research industry based on a standard per participant payment to study sites and the number of industry-sponsored clinical trials approved each year. Our analyses found that NZ’s clinical research industry has generated increasing foreign revenue and appropriate policy support could ensure that this continues to grow. In addition the probability-based revenue from the out-licensing of a drug development candidate could be important for NZ if provided with appropriate policy and financial support. PMID:24065037

From protein engineering to immobilization: promising strategies for the upgrade of industrial enzymes.

PubMed

Singh, Raushan Kumar; Tiwari, Manish Kumar; Singh, Ranjitha; Lee, Jung-Kul

2013-01-10

Enzymes found in nature have been exploited in industry due to their inherent catalytic properties in complex chemical processes under mild experimental and environmental conditions. The desired industrial goal is often difficult to achieve using the native form of the enzyme. Recent developments in protein engineering have revolutionized the development of commercially available enzymes into better industrial catalysts. Protein engineering aims at modifying the sequence of a protein, and hence its structure, to create enzymes with improved functional properties such as stability, specific activity, inhibition by reaction products, and selectivity towards non-natural substrates. Soluble enzymes are often immobilized onto solid insoluble supports to be reused in continuous processes and to facilitate the economical recovery of the enzyme after the reaction without any significant loss to its biochemical properties. Immobilization confers considerable stability towards temperature variations and organic solvents. Multipoint and multisubunit covalent attachments of enzymes on appropriately functionalized supports via linkers provide rigidity to the immobilized enzyme structure, ultimately resulting in improved enzyme stability. Protein engineering and immobilization techniques are sequential and compatible approaches for the improvement of enzyme properties. The present review highlights and summarizes various studies that have aimed to improve the biochemical properties of industrially significant enzymes.

The importance of continued engagement during the implementation phase of tobacco control policies in a middle-income country: the case of Costa Rica

PubMed Central

Crosbie, Eric; Sosa, Patricia; Glantz, Stanton A

2016-01-01

Objective To analyse the process of implementing and enforcing smoke-free environments, tobacco advertising, tobacco taxes and health warning labels from Costa Rica's 2012 tobacco control law. Method Review of tobacco control legislation, newspaper articles and interviewing key informants. Results Despite overcoming decades of tobacco industry dominance to win enactment of a strong tobacco control law in March 2012 consistent with WHO's Framework Convention on Tobacco Control, the tobacco industry and their allies lobbied executive branch authorities for exemptions in smoke-free environments to create public confusion, and continued to report in the media that increasing cigarette taxes led to a rise in illicit trade. In response, tobacco control advocates, with technical support from international health groups, helped strengthen tobacco advertising regulations by prohibiting advertising at the point-of-sale (POS) and banning corporate social responsibility campaigns. The Health Ministry used increased tobacco taxes earmarked for tobacco control to help effectively promote and enforce the law, resulting in high compliance for smoke-free environments, advertising restrictions and health warning label (HWL) regulations. Despite this success, government trade concerns allowed, as of December 2015, POS tobacco advertising, and delayed the release of HWL regulations for 15 months. Conclusions The implementation phase continues to be a site of intensive tobacco industry political activity in low and middle-income countries. International support and earmarked tobacco taxes provide important technical and financial assistance to implement tobacco control policies, but more legal expertise is needed to overcome government trade concerns and avoid unnecessary delays in implementation. PMID:26856614

PC-based automation system streamlines operations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bowman, J.

1995-10-01

The continued emergence of PC-based automation systems in the modern compressor station is driving the need for personnel who have the special skills need to support them. However, the dilemma is that operating budget restraints limit the overall number of people available to operate and maintain compressor stations. An ideal solution is to deploy automation systems which can be easily understood and supported by existing compressor station personnel. This paper reviews such a system developed by Waukesha-Pearce Industries, Inc.

Employees' perception of organizational support: a qualitative investigation in the Indian information technology (IT) industry.

PubMed

Dhar, Rajib Lochan

2012-01-01

Organizational support relates to an organization's readiness to reward increased work effort and to meet socio-emotional needs. This study investigated the various constructs of employees' perceptions of organizational support in the Indian context, with specific reference to the information technology (IT) industry. Thirty six semi-structured interviews were conducted from three different organizations over a period of four months. The participants were employed as Project Managers, Team Leaders and Executives in these organizations operating in Pune and were selected via randomized quota sampling to reflect a mix of age, positions, genders and experience with organization. Qualitative methods were used in order to collect the data, through phenomenological principles. Discussion with the participants led to the emergence of five different themes which influence employees' perception of organizational support. These were: materialistic support, supervisor support, building reciprocal relationships, Organizational justice and intentions to leave. This study provided a tentative starting point towards the greater understanding of the employee's perceived notion of organizational support. Based on the study findings, there is an imperative that the human resource department and organizational forerunners continue to use research findings to support IT professionals in various ways in order to improve their quality of work life.

The directory of US coal and technology export resources

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-10-01

The purpose of The Directory remains focused on offering a consolidated resource to potential buyers of US coal, coal technology, and expertise. This is consistent with the US policy on coal and coal technology trade, which continues to emphasize export market strategy implementation. Within this context, DOE will continue to support the teaming'' approach to marketing; i.e., vertically integrated large project teams to include multiple industry sectors, such as coal producers, engineering and construction firms, equipment manufacturers, financing and service organizations.

India's pharmaceutical industry: hype or high tech take-off?

PubMed

Malhotra, Prabodh; Lofgren, Hans

2004-11-08

India has built a large pharmaceutical industry through an array of measures in support of domestic firms. The absence of product patents enabled Indian companies to become world leading producers of generic versions of patented drugs. Low costs and a strong engineering tradition continue to sustain competitive strength. The implementation of the World Trade Organization patent regime in 2005 is driving a transformation of the industry. Key elements of the present shake-up include the return of 'big pharma' companies on a large scale and the emergence of several Indian firms that aim to become fully-fledged research-based multinationals. This article provides a description of the development and structure of the Indian pharmaceutical industry and explores questions and challenges arising from its integration into global markets.

Integrating molecular tools and conventional approaches in the Oregon State University hazelnut breeding program

Treesearch

Shawn A. Mehlenbacher

2012-01-01

The Oregon State University (OSU) hazelnut breeding program, initiated in 1969, continues to develop new cultivars for the hazelnut industry that combine suitability to the blanched kernel market with resistance to eastern filbert blight (EFB) caused by Anisogramma anomala. Oregon's hazelnut growers support the program through the Oregon...

Pathfinding on the Continuous Journey: Total Quality Management (TQM) in the Department of Defense

DTIC Science & Technology

1993-04-01

failures. Wide acceptance in industry will support its widening acceptance in government. Business schools are beginning to move into research on and...offered as excuse for failure) 5. Obsolescence in schools. Decries the emphasis on finance and creative accounting by America’s business schools 6. Reliance

A STRATEGY FOR FEDERAL SCIENCE AND TECHNOLOGY TO SUPPORT WATER AVAILABILITY AND QUALITY IN THE UNITED STATES

USDA-ARS?s Scientific Manuscript database

The status of the Nation’s water resources will continue to change with growing population, increasing urbanization, changing industrial and agricultural practices, and changing climate. Science can inform us about the status of our water resources and help us anticipate the likely effects of water-...

Old Age Income Security in Canada

PubMed Central

Willard, J. W.

1965-01-01

The position of older people in modern industrial society is markedly removed from the early industrial norm of continued participation in gainful employment until the end of life. Acceptance of a retirement age some 13 years before the end of average male life expectancy has brought with it serious social problems. At the same time, however, an increasingly productive economy has provided both the willingness and ability to complement the retirement provisions of individual initiative with public programs of old age income maintenance. This public support began in Canada with the voluntary approach embodied in the government annuities plan. A program of “public assistance” followed. These were succeeded, first, by the “universal payment” under the Old Age Security Act and, more recently, by the social insurance approach of the Canada Pension Plan. Along with improved public support, the role of occupational pension plans and of individually initiated retirement provisions continues to be substantial. Current interest in, and in some cases legislation on, such problems as vesting and solvency are leading to improvements in private pension programs. PMID:5828720

Leadership and Funding: Changes Ahead for Agricultural Safety and Health.

PubMed

Murphy, Dennis J; Lee, Barbara C

2018-01-01

For the last several decades, financial support for agricultural safety and health programs and professionals has primarily been covered by public dollars through federal and state government grant programs and appropriations. This federal and state funding provided a tremendous boost to farm safety and health professionals and program efforts for 30+ years and has provided the foundation and structure for current agricultural safety and health efforts and activities. However, there is reason to question long-term sustainability of a sufficient level of federal and state dollars for agricultural safety and health. Public funding for agricultural safety and health has never quite kept up to inflation, but even more ominous is that the entire agricultural safety and health program has been proposed for elimination each year by the White House budget beginning with the fiscal year 2012. It seems prudent, perhaps even imperative, for the agricultural safety and health community to find alternative support mechanisms. We suggest that now is a great time for agricultural businesses, services, and organizations to step up their financial support. Fortunately, several positive examples have recently surfaced within the agricultural community. As the agricultural industry continues to be a dominant enterprise in the United States, the integration of significant funding and the role of leadership from within the industry must continue to expand.

Industry sponsored youth smoking prevention programme in Malaysia: a case study in duplicity.

PubMed

Assunta, M; Chapman, S

2004-12-01

To review tobacco company strategies of using youth smoking prevention programmes to counteract the Malaysian government's tobacco control legislation and efforts in conducting research on youth to market to them. Systematic keyword and opportunistic website searches of formerly private internal industry documents. Search terms included Malay, cmtm, jaycees, YAS, and direct marketing; 195 relevant documents were identified for this paper. Industry internal documents reveal that youth anti-smoking programmes were launched to offset the government's tobacco control legislation. The programme was seen as a strategy to lobby key politicians and bureaucrats for support in preventing the passage of legislation. However, the industry continued to conduct research on youth, targeted them in marketing, and considered the teenage market vital for its survival. Promotional activities targeting youth were also carried out such as sports, notably football and motor racing, and entertainment events and cash prizes. Small, affordable packs of cigarettes were crucial to reach new smokers. The tobacco industry in Malaysia engaged in duplicitous conduct in regard to youth. By buying into the youth smoking issue it sought to move higher on the moral playing field and strengthen its relationship with government, while at the same time continuing to market to youth. There is no evidence that industry youth smoking prevention programmes were effective in reducing smoking; however, they were effective in diluting the government's tobacco control legislation.

Industry sponsored youth smoking prevention programme in Malaysia: a case study in duplicity

PubMed Central

Assunta, M; Chapman, S

2004-01-01

Objective: To review tobacco company strategies of using youth smoking prevention programmes to counteract the Malaysian government's tobacco control legislation and efforts in conducting research on youth to market to them. Methods: Systematic keyword and opportunistic website searches of formerly private internal industry documents. Search terms included Malay, cmtm, jaycees, YAS, and direct marketing; 195 relevant documents were identified for this paper. Results: Industry internal documents reveal that youth anti-smoking programmes were launched to offset the government's tobacco control legislation. The programme was seen as a strategy to lobby key politicians and bureaucrats for support in preventing the passage of legislation. However, the industry continued to conduct research on youth, targeted them in marketing, and considered the teenage market vital for its survival. Promotional activities targeting youth were also carried out such as sports, notably football and motor racing, and entertainment events and cash prizes. Small, affordable packs of cigarettes were crucial to reach new smokers. Conclusion: The tobacco industry in Malaysia engaged in duplicitous conduct in regard to youth. By buying into the youth smoking issue it sought to move higher on the moral playing field and strengthen its relationship with government, while at the same time continuing to market to youth. There is no evidence that industry youth smoking prevention programmes were effective in reducing smoking; however, they were effective in diluting the government's tobacco control legislation. PMID:15564218

Restructuring the Philippine electric power industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bowden, S.; Ellis, M.

1995-06-01

The Philippine electricity industry has shown it can change, and change quickly. In contrast with the crises and changes imposed on it in the past, the industry now has as opportunity to forge a progressive, forward-looking strategy, This opportunity is enhanced by the force of law - the Department of Energy Act of 1992 mandates privatization of the National Power Corporation (NPC) - and by the easing of the power crisis which has significantly diminished political interference. In order to position the industry for growth and rising investment requirements and to support the growing role of the Philippine economy inmore » international markets, that strategy must address the structural deficiencies that continue to plague the industry. By addressing structural changes that need to be made now, it can build on the impetus gained from its privatization mandate to improve accountability, increase efficiency and reduce government risk.« less

Demandite, lunar materials and space industrialization

NASA Technical Reports Server (NTRS)

Criswell, D. R.

1977-01-01

Terrestrial industry consumes a wide range of elements in producing the outputs which support and make industrial societies possible. 'Demandite' is a conceptual or synthetic molecule which is composed of the weight fractions of the major elements consumed by industry. Demandite needed for mature industrial activities in space will differ from the terrestrial composition because solar energy must replace hydrocarbon-energy, lunar and asteroidal bulk compositions are different from mineral deposits on the earth, and the major bulk processing in space will be the creation of radiation shielding for human habitats to provide real estate in space complete with water, atmosphere and life-stock elements. Demandite cost may be dominated by earth to deep space transport cost of minor elemental constituents depleted in the lunar soils unless careful attention is given to substitution of materials, searches of the moon (polar regions) and asteroids for the depleted elements, and continuing lowering of earth to deep space transport costs.

Public policy implications of tobacco industry smuggling through Native American reservations into Canada.

PubMed

Kelton, Max H; Givel, Michael S

2008-01-01

From 1980 to 1994, the Canadian government enacted major tax increases on tobacco products. These actions initiated significant tobacco smuggling from the United States into Canada through a few U.S. Native American reservations to undercut the price of Canadian tobacco products. The tobacco industry blamed rampant smuggling on excessive taxation; however, research shows that the tobacco industry had actually promoted smuggling schemes to both increase profits and provide an argument for tobacco taxation reduction. Although the smuggling has resulted in numerous U.S. and Canadian criminal convictions of tobacco industry officials and partners, significant smuggling continues throughout the world. For the few Native Americans involved, the smuggling was lucrative and they were able to avoid criminal prosecution through tribal sovereignty. Industry-supported tobacco smuggling has had a profoundly negative effect on Canadian public health that must be brought to light to prevent future similar occurrences.

The internet and the physician-patient relationship.

PubMed

Sechrest, Randale C

2010-10-01

Since the emergence of the public Internet in the early 1990s, the healthcare industry has been struggling to understand how best to utilize this resource. During the last decade there has been an increase in both the interest and participation by healthcare providers in the Internet space, but many observers continue to push for more development of healthcare resources to better support the provider-patient relationship. This paper will review the historical development of the Internet, the core concepts that have driven the emergence and evolution of the Internet as a mass medium of information exchange, and how the healthcare industry can harness the Internet to improve the provider patient relationship. WHERE ARE WE NOW?: The healthcare industry continues to lag behind other industries that have been transformed by the Internet. Numerous industries including travel, real estate, retail sales, and banking have migrated both comprehensive information resources and transactions to the Internet in order to improve efficiency and customer satisfaction. That same process is occurring now in the healthcare industry. Credible and comprehensive Information resources are beginning to mature. Transactions are still in their infancy, reflecting a continued concern about privacy and security. WHERE DO WE NEED TO GO?: We need to improve information resources to educate and inform patients. Improving the availability and credibility of information resources will empower patients to make better healthcare decisions and I contend will ultimately reduce the cost of delivering care. HOW DO WE GET THERE?: Orthopaedists must first recognize the value of information resources to the patient. Effective communication with patients is a critical component of providing healthcare services. All healthcare providers should reflect on the importance of developing an effective communications strategy for their own practice and consider the benefits of participating in efforts by professional organizations to improve existing information resources.

The Critical Role of Organic Chemistry in Drug Discovery.

PubMed

Rotella, David P

2016-10-19

Small molecules remain the backbone for modern drug discovery. They are conceived and synthesized by medicinal chemists, many of whom were originally trained as organic chemists. Support from government and industry to provide training and personnel for continued development of this critical skill set has been declining for many years. This Viewpoint highlights the value of organic chemistry and organic medicinal chemists in the complex journey of drug discovery as a reminder that basic science support must be restored.

Access to and support for continuing professional education amongst Queensland nurses: 2004 and 2007.

PubMed

Hegney, Desley; Tuckett, Anthony; Parker, Deborah; Robert, Eley

2010-02-01

This paper reports on the findings of a prospective exploratory study related to nurses' self-reports of continuing professional education access and support. The data were gathered by two postal surveys undertaken in 2004 and 2007 each which sampled 3000 nurses of the 30,000 nurse members of the industrial body - Queensland Nurses' Union. The response rates were 44.9% and 39.7% for 2004 and 2007, respectively. Over 85% of the nurses reported they had access to continuing professional education activities. However, it is apparent that the majority of these activities are either partially or completely self-funded. Further, between 2004 and 2007 the amount of financial support provided by employers for continuing education and training activities has decreased significantly. While there were differences between 2004 and 2007, the major barrier to be able to attend continuing professional education were financial (could not afford the fee involved; could not afford to take unpaid leave to attend). Another major barrier in both 2004 and 2007 was having the time to undertake the activity. Analysis for differences between nurses in different geographical locations indicated that distance remains a major barrier for nurses in rural and remote areas. These quantitative findings were supported by the qualitative findings on nurses' work where 'education and training' was, overall, the fifth highest ranked issue requiring further attention. Copyright 2009 Elsevier Ltd. All rights reserved.

The Advanced Industrial Materials (AIM) program office of industrial technologies fiscal year 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sorrell, C.A.

1997-04-01

In many ways, the Advanced Industrial Materials (AIM) Program underwent a major transformation in FY95 and these changes have continued to the present. When the Program was established in 1990 as the Advanced Industrial Concepts (AIC) Materials Program, the mission was to conduct applied research and development to bring materials and processing technologies from the knowledge derived from basic research to the maturity required for the end use sectors for commercialization. In 1995, the Office of Industrial Technologies (OIT) made radical changes in structure and procedures. All technology development was directed toward the seven `Vision Industries` that use about 80%more » of industrial energy and generated about 90% of industrial wastes. These are: aluminium; chemical; forest products; glass; metal casting; refineries; and steel. OIT is working with these industries, through appropriate organizations, to develop Visions of the desired condition of each industry some 20 to 25 years in the future and then to prepare Road Maps and Implementation Plans to enable them to reach their goals. The mission of AIM has, therefore, changed to `Support development and commercialization of new or improved materials to improve productivity, product quality, and energy efficiency in the major process industries.`« less

National Patterns of Science and Technology Resources: 1987. Surveys of Science Resources Series.

ERIC Educational Resources Information Center

Jankowski, John E., Jr.

The dual concerns of economic competitiveness and national security have provided the main impetus behind the continued growth in support for research and development (R&D) by both government and industry. The funding of science and technology is a major factor behind capital and labor productivity increases. This report presents a summary of…

From Protein Engineering to Immobilization: Promising Strategies for the Upgrade of Industrial Enzymes

PubMed Central

Singh, Raushan Kumar; Tiwari, Manish Kumar; Singh, Ranjitha; Lee, Jung-Kul

2013-01-01

Enzymes found in nature have been exploited in industry due to their inherent catalytic properties in complex chemical processes under mild experimental and environmental conditions. The desired industrial goal is often difficult to achieve using the native form of the enzyme. Recent developments in protein engineering have revolutionized the development of commercially available enzymes into better industrial catalysts. Protein engineering aims at modifying the sequence of a protein, and hence its structure, to create enzymes with improved functional properties such as stability, specific activity, inhibition by reaction products, and selectivity towards non-natural substrates. Soluble enzymes are often immobilized onto solid insoluble supports to be reused in continuous processes and to facilitate the economical recovery of the enzyme after the reaction without any significant loss to its biochemical properties. Immobilization confers considerable stability towards temperature variations and organic solvents. Multipoint and multisubunit covalent attachments of enzymes on appropriately functionalized supports via linkers provide rigidity to the immobilized enzyme structure, ultimately resulting in improved enzyme stability. Protein engineering and immobilization techniques are sequential and compatible approaches for the improvement of enzyme properties. The present review highlights and summarizes various studies that have aimed to improve the biochemical properties of industrially significant enzymes. PMID:23306150

Healthcare Industry Injuries by Patient Contact Status in Kentucky, 2012-2014.

PubMed

Ranzenberger, Kristen; Bunn, Terry L; Slavova, Svetla

2016-10-01

The healthcare industry continues to have a high number of reported injuries. The purpose of this study was to characterize healthcare industry injuries by patient contact status, identify the occupations associated with healthcare injuries by patient contact status, and determine healthcare injury rates by occupation to gain a better understanding of healthcare industry-compensated injuries and better target safety practices and programs in the healthcare industry. Kentucky healthcare industry workers' compensation first reports of injuries from calendar years 2012-2014 were categorized into injuries involved in direct patient contact versus injuries without direct patient contact using narrative text analysis. Injury numbers and rates were calculated for a number of data variables. Healthcare injuries without direct patient contact (55% of all first reports of injuries) occurred more frequently among older workers (45 years old and older [51%]), in "other" occupations such as housekeeping and maintenance (28%), and as a result of falls/slips/trips (39%) and sprains/tears (38%). In contrast, a higher percentage of healthcare injuries involving direct patient contact occurred among workers younger than 35 years (48%), in healthcare support occupations (50%), and resulting from sprains/tears (66%) and lifting/handling (52%), compared with those without direct patient contact. Findings from this study can better target the need for new and/or additional specific workplace safety training, especially in the healthcare support and nursing occupations with and without patient contact.

The importance of continued engagement during the implementation phase of tobacco control policies in a middle-income country: the case of Costa Rica.

PubMed

Crosbie, Eric; Sosa, Patricia; Glantz, Stanton A

2017-01-01

To analyse the process of implementing and enforcing smoke-free environments, tobacco advertising, tobacco taxes and health warning labels from Costa Rica's 2012 tobacco control law. Review of tobacco control legislation, newspaper articles and interviewing key informants. Despite overcoming decades of tobacco industry dominance to win enactment of a strong tobacco control law in March 2012 consistent with WHO's Framework Convention on Tobacco Control, the tobacco industry and their allies lobbied executive branch authorities for exemptions in smoke-free environments to create public confusion, and continued to report in the media that increasing cigarette taxes led to a rise in illicit trade. In response, tobacco control advocates, with technical support from international health groups, helped strengthen tobacco advertising regulations by prohibiting advertising at the point-of-sale (POS) and banning corporate social responsibility campaigns. The Health Ministry used increased tobacco taxes earmarked for tobacco control to help effectively promote and enforce the law, resulting in high compliance for smoke-free environments, advertising restrictions and health warning label (HWL) regulations. Despite this success, government trade concerns allowed, as of December 2015, POS tobacco advertising, and delayed the release of HWL regulations for 15 months. The implementation phase continues to be a site of intensive tobacco industry political activity in low and middle-income countries. International support and earmarked tobacco taxes provide important technical and financial assistance to implement tobacco control policies, but more legal expertise is needed to overcome government trade concerns and avoid unnecessary delays in implementation. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Future Supply Chains Enabled by Continuous Processing—Opportunities and Challenges. May 20–21, 2014 Continuous Manufacturing Symposium

PubMed Central

Srai, Jagjit Singh; Badman, Clive; Krumme, Markus; Futran, Mauricio; Johnston, Craig

2015-01-01

This paper examines the opportunities and challenges facing the pharmaceutical industry in moving to a primarily “continuous processing”-based supply chain. The current predominantly “large batch” and centralized manufacturing system designed for the “blockbuster” drug has driven a slow-paced, inventory heavy operating model that is increasingly regarded as inflexible and unsustainable. Indeed, new markets and the rapidly evolving technology landscape will drive more product variety, shorter product life-cycles, and smaller drug volumes, which will exacerbate an already unsustainable economic model. Future supply chains will be required to enhance affordability and availability for patients and healthcare providers alike despite the increased product complexity. In this more challenging supply scenario, we examine the potential for a more pull driven, near real-time demand-based supply chain, utilizing continuous processing where appropriate as a key element of a more “flow-through” operating model. In this discussion paper on future supply chain models underpinned by developments in the continuous manufacture of pharmaceuticals, we have set out; The significant opportunities to moving to a supply chain flow-through operating model, with substantial opportunities in inventory reduction, lead-time to patient, and radically different product assurance/stability regimes. Scenarios for decentralized production models producing a greater variety of products with enhanced volume flexibility. Production, supply, and value chain footprints that are radically different from today's monolithic and centralized batch manufacturing operations. Clinical trial and drug product development cost savings that support more rapid scale-up and market entry models with early involvement of SC designers within New Product Development. The major supply chain and industrial transformational challenges that need to be addressed. The paper recognizes that although current batch operational performance in pharma is far from optimal and not necessarily an appropriate end-state benchmark for batch technology, the adoption of continuous supply chain operating models underpinned by continuous production processing, as full or hybrid solutions in selected product supply chains, can support industry transformations to deliver right-first-time quality at substantially lower inventory profiles. © 2015 The Authors. Journal of Pharmaceutical Sciences published by Wiley Periodicals, Inc. and the American Pharmacists Association J Pharm Sci 104:840–849, 2015 PMID:25631279

Decision Support Model for Selection Technologies in Processing of Palm Oil Industrial Liquid Waste

NASA Astrophysics Data System (ADS)

Ishak, Aulia; Ali, Amir Yazid bin

2017-12-01

The palm oil industry continues to grow from year to year. Processing of the palm oil industry into crude palm oil (CPO) and palm kernel oil (PKO). The ratio of the amount of oil produced by both products is 30% of the raw material. This means that 70% is palm oil waste. The amount of palm oil waste will increase in line with the development of the palm oil industry. The amount of waste generated by the palm oil industry if it is not handled properly and effectively will contribute significantly to environmental damage. Industrial activities ranging from raw materials to produce products will disrupt the lives of people around the factory. There are many alternative technologies available to process other industries, but problems that often occur are difficult to implement the most appropriate technology. The purpose of this research is to develop a database of waste processing technology, looking for qualitative and quantitative criteria to select technology and develop Decision Support System (DSS) that can help make decisions. The method used to achieve the objective of this research is to develop a questionnaire to identify waste processing technology and develop the questionnaire to find appropriate database technology. Methods of data analysis performed on the system by using Analytic Hierarchy Process (AHP) and to build the model by using the MySQL Software that can be used as a tool in the evaluation and selection of palm oil mill processing technology.

Three Myths About Dietary Supplements … and How Knowing the Right Answers Is Good for Your Integrative Medicine Practice.

PubMed

Israelsen, Loren; Lampe, Frank

2016-06-01

The use of safe and beneficial dietary supplements remains an important part of your patients' healthy lifestyle-and supplements are likely an important part of your integrative medicine practice. Although issues surrounding potency, ingredient identification, adulteration, and the enforcement of existing laws are legitimate concerns for medical professionals and consumers, the responsible industry is actively working to raise quality standards for its products through a number of self-regulatory measures. These include education about and adoption of additional quality assurance initiatives, such as GMPs for botanical ingredients; better supply-chain management; adoption of improved identification and testing methodologies; an industry-wide product registry; the use of accredited third-party certifications and seals; and initiatives to promote widespread membership in the industry's trade associations, which is a reliable indicator of a company's support of and adherence to strict quality guidelines. Also, industry support of appropriate enforcement actions against problem players and products from the US Food and Drug Administration (FDA), the Federal Trade Commission (FTC), and states' attorneys general continues in an effort to rid the market of unsafe and mislabeled products.

Energy Engineering Analysis Program, limited energy study of steam distribution systems, Hawthorne Army Ammunition Depot, Hawthorne, Nevada. Programming documents

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-09-01

The project is a significant part of Hawthorne Army Ammunition Depot`s effort to achieve a 20-percent reduction in energy consumption by FY2000 versus FY1985 baseline levels. The project will also assure that heating services are provided to Industrial Area facilities on a continuing basis, supporting mission requirements.

2005 Mississippi Curriculum Framework: Postsecondary Banking and Finance Technology. (Program CIP: 52.0803 - Banking and Financial Support Services)

ERIC Educational Resources Information Center

Gullett, Janet; Thigpen, Herbert

2005-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2010 Mississippi Curriculum Framework: Postsecondary Banking and Finance Technology. (Program CIP: 52.0803 - Banking and Financial Support Services)

ERIC Educational Resources Information Center

Gullett, Janet; Dinkins, Shivochie

2010-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

NASA industry education initiative. Education programs report, 1991

NASA Technical Reports Server (NTRS)

1991-01-01

Findings from the initial inventory of education programs show that support for the NASA-Industry Education Initiative (NIEI) appears to be strong among the organizations surveyed. In addition, the range, depth and historical baselines of NIEI education programs are encouraging. It is also apparent that there is a significant level of cooperation between NIEI members and other organizations. Heavily focused towards science, engineering, mathematics and technology achievement, NIEI activities appear to be aligned with national education goals. Three criticisms are revealed: (1) the majority of programs are targeted fairly late in the education cycle; (2) the number of initiatives geared towards adult literacy and adult skills-enhancement appears to be relatively low; (3) the majority of NIEI activities involve traditional education-assistance programs, but the number of critical assessment and systematic reform initiatives is low. Four Working Group recommendations resulted from this activity: (1) NIEI Working Group operations should continue for an indefinite period, with participation open to other like-minded private-sector organization; (2) the report should be periodically updated; (3) an analysis of ongoing education programs should be conducted; (4) American corporations should continue to support education and evaluate in-house programs periodically.

The role of the pharmaceutical animal health industry in post-marketing surveillance of resistance.

PubMed

Lens, S

1993-06-01

The pharmaceutical animal health industry must be committed to the total life cycle of products, i.e. during both the pre- and post-marketing period. Support of antibacterial agents during the postmarketing period is not restricted to maintaining a well-established distribution and promotion system. Care has to be taken continuously to maintain and/or improve the quality, safety (for user, target animal and environment) and clinical efficacy. The pharmaceutical industry contributes to this by: 1. Introducing antibacterials in different animal species for the most effective disease condition only and by ensuring the veterinary profession is informed about relevant findings on: a. the mechanism of action; b. pharmacodynamic properties; c. pharmacokinetic properties (plasma, target tissue); d. clinical efficacy data and in vitro sensitivity data; e. valid species-specific MIC breakpoints; f. precise dose and treatment regime. 2. Updating on a regular basis on: a. new findings on the mechanism of action (in vitro and in vivo); b. the optimal use program in the light of changes in animal husbandry, farm management and epidemiology on national and international level; c. adjustment of species-specific MIC breakpoints when necessary. 3. Providing continuous information in collaboration with animal health laboratories about: a. clinical field surveillance for efficacy (national, international); b. in vitro sensitivity/resistance surveillance (national, international); c. use of in vitro data to support prediction of in vivo efficacy. Surveillance of resistance, in vitro, is therefore part of a package of information needed on a routine basis by the pharmaceutical industry to allow the best possible use of antibacterials and to minimize induction of resistance.(ABSTRACT TRUNCATED AT 250 WORDS)

Current situation and future prospects for the Australian beef industry.

PubMed

Greenwood, Paul Leo; Ferguson, Drewe M

2018-04-12

Beef production extends over almost half of Australia, with about 47,000 cattle producers that contribute about 20% ($A12.7 billion GVP) of the total value of farm production in Australia. Australia is one of the world's most efficient producers of cattle and was the world's third largest beef exporter in 2016. The Australian beef industry had 25 million head of cattle in 2016-17, with a national beef breeding herd of 11.5 million head. Australian beef production includes pasture based cow-calf systems, a backgrounding or grow-out period on pasture, and feedlot or pasture finishing. Feedlot finishing has assumed more importance in recent years to assure the eating quality of beef entering the relatively small Australian domestic market, and to enhance the supply of higher value beef for export markets. Maintenance of Australia's preferred status as a quality assured supplier of high value beef produced under environmentally sustainable systems from 'disease-free' cattle is of highest importance. Stringent livestock and meat quality regulations and quality assurance systems, and productivity growth and efficiency across the supply chain to ensure price competiveness, are crucial for continued export market growth in the face of increasing competition. Major industry issues, that also represent research, development and adoption priorities and opportunities for the Australian beef industry have been captured within exhaustive strategic planning processes by the red meat and beef industries. At the broadest level, these issues include consumer and industry support, market growth and diversification, supply chain efficiency, productivity and profitability, environmental sustainability, and animal health and welfare. This review provides an overview of the Australian beef industry including current market trends and future prospects, and major issues and opportunities for the continued growth, development and profitability of the industry.

Characterisation of potato crisp effective porosity using micro-CT.

PubMed

Renshaw, Ryan C; Robinson, John P; Dimitrakis, Georgios A; Bows, John R; Kingman, Samuel W

2016-10-01

The effective porosity is an important quantitative parameter for food products that has a significant effect on taste and quality. It is challenging to quantify the apparent porosity of fried potato crisps as they have a thin irregularly shaped cross section containing oil and water. This study uses a novel micro-CT technique to determine the solid volume fraction and hence the effective porosity of three types of potato crisps: standard continuously fried crisps, microwaved crisps, and continuously fried 'kettle' crisps. It was found that continuously fried kettle crisps had the lowest effective porosity at 0.54, providing the desired crunchy taste and lower oil contents. Crisps produced using a microwave process designed to mimic the dehydration process of standard continuous fried crisps had an effective porosity of 0.65, which was very similar to the effective porosity of 0.63 for standard continuously fried crisps. The results were supported by the findings of a forced preference consumer test. The effective porosity affects the product taste and is therefore a critical parameter. This study shows that micro-CT analysis can be used to characterise the change in effective porosity of a thin irregularly shaped food product, caused by a change of cooking procedure. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Approaches to Identifying the Emerging Innovative Water Technology Industry in the United States

PubMed Central

WOOD, ALLISON R.; HARTEN, TERESA; GUTIERREZ, SALLY C.

2018-01-01

Clean water is vital to sustaining our natural environment, human health, and our economy. As infrastructure continues to deteriorate and water resources become increasingly threatened, new technologies will be needed to ensure safe and sustainable water in the future. Though the US water industry accounts for approximately 1% gross domestic product and regional “clusters” for water technology exist throughout the country, this emerging industry has not been captured by recent studies. As use of the term “cluster” becomes more prevalent, regional mapping efforts have revealed international differences in definition yet showcase this industry’s economic impact. In reality, institutional processes may inhibit altering industry coding to better describe water technology. Forgoing the benefits of national economic tracking, alternative data sets are available, which may support new ways of identifying these clusters. This work provides cluster definitions; summarizes current approaches to identifying industry activity using data, interviews, and literature; and sets a foundation for future research. PMID:29937546

Preparing displaced adults for the optics/photonics workforce

NASA Astrophysics Data System (ADS)

Hull, Darrell M.

2000-06-01

As the optics/photonics industry continues to grow, the demand for workers is assumed to increase proportionally. Empirical data seem to support this assumption. This increase presents a challenge to optics/photonics education, since they control and assume responsibility for a key factor in the ability of industry to further expand. At the same time, the U.S. government through the Department of Labor and the Workforce Investment Act has requested that communities enact programs for displaced adults to transition to the workplace. A program of study is provided that would assist adults in making this transition from unemployment to the optics/photonics industry, with the necessary general work skills, occupational optics/photonics skills, and ability to progress on the job with academic foundations in math and science.

Logistics in a low carbon concept: Connotation and realization way

NASA Astrophysics Data System (ADS)

Zheng, Chaocheng; Qiu, Xiaoying; Mao, Jiarong

2017-01-01

Low-carbon logistics has become a trend for the logistics industry-as a high-energy consumption industry, continuation of its previous operating mode has been significantly behind the times. So logistics industry must release lower carbon emissions. This paper sort out the literature home and abroad from three aspects, that is, the definition of low-carbon logistics, low-carbon logistics implementation mechanisms or measures, and low carbon design quantitative models. The research shows: low-carbon logistics needed to implemented both in enterprise' macro and micro level, which means the government should provide relevant policy support and micro enterprises should be actively sought from all sectors of the logistics in energy saving. In practice, low-carbon logistics optimization models are effective tools for enterprises to implement emission reduction.

The Role of the Food Industry in Obesity Prevention.

PubMed

Binks, Martin

2016-06-01

Obesity is a complex disease of diverse etiology. Among the potential influences in the development of obesity, the food supply chain remains an important influence. We provide a conceptual overview related to the food industry's role in obesity prevention. We first discuss some limitations of current public health efforts. We then describe how a model that attends to personal autonomy in the context of supportive policy intervention can empower individuals in their efforts to navigate the food supply chain. We then provide an evidence informed overview of key areas where continued efforts to collaboratively engage the food industry, through solution-focused dialogue and action, have the potential to contribute to obesity prevention. While challenging, appropriately transparent, well-governed public-private partnerships have the demonstrated potential to benefit the communities we serve.

The orthopaedic profession and industry: conflict or convergence of interests.

PubMed

Crowninshield, Roy

2003-07-01

Many improvements in orthopaedic care have been enabled by the relationship that exists between the orthopaedic profession and the orthopaedic industry. This relationship is multifactorial and includes new technology development, medical education, orthopaedic research, and patient education. Acting individually and collectively, the profession and the industry advance their standing by focusing on improved patient care. Although the industry, the profession, and the patient have many shared interests, they also may have real or potential conflicts of interests. The patient's interest in the quality of treatment outcome is shared by the profession and industry. However, the interests of the profession may include issues related to the success of their practices, management of their time, and advancement of their skills. Industry's interests, in turn, include the support of their customers and the success of their businesses. Conflicts of interest between these parties are potentially neither avoidable nor undesirable. Managed well, the relationship of the orthopaedic profession and the industry achieves the goals of each while advancing patient care. As the profession and the industry each experience change, continued attention should be directed to ensuring that the interest of each is advanced only in the context of serving the interest of the patient with musculoskeletal disorders.

How to sell safer sex.

PubMed

Overs, C

1991-09-01

Social and economic factors determine the extent of the sex industry in societies. Despite AIDS, the sex industry will continue to thrive. Accordingly, health promotion strategies aimed at sex workers and their clients should not stem from the belief that the industry should cease to exist. This paper offers advice in developing and implementing programs to promote safer sex among sex workers. The social context is 1 element to consider in planning successful campaigns. Interventions must be combined with well-planned prevention campaigns aimed at entire populations. The opinions and participation of those involved in the industry should also be sought, while worker discussion and action upon other community issues should not be discouraged. Care should be given to target the numerous and diverse sex worker audiences in addition to other persons related to and involved in the industry. Programs should address the main obstacles to practicing safer sex, and attention should be given to ensure the provision of an adequate and regular supply of cheap or free condoms through varied distribution channels. In the area of service provision, sex workers need easy access to social support and health care services from which they are often excluded. Activities conducted around the world include the marketing of safer sex, distributing printed information on HIV and AIDS to clients, training sex workers to pass designated constructive ideas to others involved in the sex industry, referring sex workers to sex businesses supportive of safer sex practices, and developing street theater and cabaret shows in bars.

Surgeon-industry conflict of interest: survey of opinions regarding industry-sponsored educational events and surgeon teaching: clinical article.

PubMed

DiPaola, Christian P; Dea, Nicolas; Dvorak, Marcel F; Lee, Robert S; Hartig, Dennis; Fisher, Charles G

2014-03-01

Conflict of interest (COI) as it applies to medical education and training has become a source of considerable interest, debate, and regulation in the last decade. Companies often pay surgeons as faculty for educational events and often sponsor and give financial support to major professional society meetings. Professional medical societies, industry, and legislators have attempted to regulate potential COI without consideration for public opinion. The practice of evidence-based medicine requires the inclusion of patient opinion along with best available evidence and expert opinion. The primary goal of this study was to assess the opinion of the general population regarding surgeon-industry COI for education-related events. A Web-based survey was administered, with special emphasis on the surgeon's role in industry-sponsored education and support of professional societies. A survey was constructed to sample opinions on reimbursement, disclosure, and funding sources for educational events. There were 501 completed surveys available for analysis. More than 90% of respondents believed that industry funding for surgeons' tuition and travel for either industry-sponsored or professional society educational meetings would either not affect the quality of care delivered or would cause it to improve. Similar results were generated for opinions on surgeons being paid by industry to teach other surgeons. Moreover, the majority of respondents believed it was ethical or had no opinion if surgeons had such a relationship with industry. Respondents were also generally in favor of educational conferences for surgeons regardless of funding source. Disclosures of a surgeon-industry relationship, especially if it involves specific devices that may be used in their surgery, appears to be important to respondents. The vast majority of respondents in this study do not believe that the quality of their care will be diminished due to industry funding of educational events, for surgeon tuition, and/or travel expenses. The results of this study should help form the basis of policy and continued efforts at surgeon-industry COI management.

Partnering at the National Laboratories: Catalysis as a Case Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

JACKSON,NANCY B.

1999-09-14

The role of the national laboratories, particularly the defense program laboratories, since the end of the cold war, has been a topic of continuing debate. The relationship of national laboratories to industry spurred debate which ranged from designating the labs as instrumental to maintaining U.S. economic competitiveness to concern over the perception of corporate welfare to questions regarding the industrial globalization and the possibility of U.S. taxpayer dollars supporting foreign entities. Less debated, but equally important, has been the national laboratories' potential competition with academia for federal research dollars and discussions detailing the role of each in the national researchmore » enterprise.« less

Challenges of Remote Sensing and Spatial Information Education and Technology Transfer in a Fast Developing Industry

NASA Astrophysics Data System (ADS)

Tsai, F.; Chen, L.-C.

2014-04-01

During the past decade, Taiwan has experienced an unusual and fast growing in the industry of mapping, remote sensing, spatial information and related markets. A successful space program and dozens of advanced airborne and ground-based remote sensing instruments as well as mobile mapping systems have been implemented and put into operation to support the vast demands of geospatial data acquisition. Moreover, in addition to the government agencies and research institutes, there are also tens of companies in the private sector providing geo-spatial data and services. However, the fast developing industry is also posing a great challenge to the education sector in Taiwan, especially the higher education for geo-spatial information. Facing this fast developing industry, the demands of skilled professionals and new technologies in order to address diversified needs are indubitably high. Consequently, while delighting in the expanding and prospering benefitted from the fast growing industry, how to fulfill these demands has become a challenge for the remote sensing and spatial information disciplines in the higher education institutes in Taiwan. This paper provides a brief insight into the status of the remote sensing and spatial information industry in Taiwan as well as the challenges of the education and technology transfer to support the increasing demands and to ensure the continuous development of the industry. In addition to the report of the current status of the remote sensing and spatial information related courses and programs in the colleges and universities, current and potential threatening issues and possible resolutions are also discussed in different points of view.

What are the livestock industries doing, and what do they need from us?

PubMed

Meeker, D L

1999-02-01

Livestock industries are facing global competition and revolutionary changes. While facing this global competition, the similarities of many animal meat products require that they compete on a cost-of-production basis. Additional issues include the environmental impact of animal agriculture, the role of animal products in human nutrition, food safety and quality, biotechnology, animal welfare, and market access. Progressive producers are becoming more aware of the needs of their customers and are striving to improve product quality. Checkoff funds are used to finance promotion, research, and consumer information programs and are increasingly used to finance producer education. Industrialization trends in the livestock industries are changing the needs of constituencies, delivery mechanisms, and relationships with the people involved. Characteristics of closed operations include high production cost, outdated technology, smaller size, older operators, and lack of management focus. Successful operations tend to be growing in capacity, are system-oriented, maintain high throughput, keep accurate records, use outside consultants, and control production costs. Modern livestock production has lowered the cost of production by integrating new production and management technologies. In order for producers to be successful in the future, access to technology, capital, and timely information will be critical. Animal scientists have many common objectives with livestock industries. Their work in research, teaching, and extension is critical for continued progress. However, people in the industries sometimes have the perception that academic arrogance, discipline myopia, uncoordinated research, slow technology transfer, increasing research costs, and counter-productive tenure systems prevent animal scientists from being as relevant and responsive as they could be. Support from the industries is essential as animal scientists and academic departments seek political and funding support. This support can be attained by including integrated systems research, improving communication skills, achieving more efficient research budgets, rapidly publishing results, reducing the cost of information distribution, developing flexible research agendas, retraining scientists, acquiring modern methods, and emphasizing critical thinking, communication, and teamwork when teaching.

Building Institutional Capacity in Rural Northern Ireland: The Role of Partnership Governance in the LEADER II Programme

ERIC Educational Resources Information Center

Scott, Mark

2004-01-01

Throughout the 1990s, Europe's rural areas increasingly embraced local action and local development solutions to face the challenge of the continued re-structuring of the agricultural industry. In parallel, in both the EU and the UK, a policy discourse has emerged which envisages a fundamental shift in support policies for rural areas from a…

Changes and Trends in the Pallet Industry: Recovery and Recycling

Treesearch

Robert J. Bush; Philip A. Araman

1998-01-01

In the first article of this three-part series we described trends in the use of new wood materials for pallets and containers. These trends support the belief that new pallet production in recent years has been level or perhaps slightly decreasing while the demand for pallets continues to grow. This gap has resulted, in part, from increased recovery of used pallets...

Containing diffusion: the tobacco industry's multipronged trade strategy to block tobacco standardised packaging.

PubMed

Crosbie, Eric; Eckford, Robert; Bialous, Stella

2018-04-21

To analyse the tobacco industry's strategy of using trade and investment agreements to prevent the global diffusion of standardised packaging (SP) of tobacco products. Review of tobacco industry documents, relevant government documents and media items. The data were triangulated and thematically analysed. Internal tobacco industry documents reveal that during the early 1990s, tobacco companies developed a multipronged trade strategy to prevent the global diffusion of progressive tobacco packaging and labelling proposals, including SP. This strategy consisted of (1) framing the health issue in terms of trade and investment, (2) detailing alleged legal violations concerning trade barriers, intellectual property and investment rights, (3) threatening legal suits and reputational damage, and (4) garnering third-party support. These efforts helped delay SP until 2010 when Australia became the first country to reintroduce SP proposals, followed by governments in the UK and New Zealand in 2012, Ireland in 2013 and France in 2014. Review of government documents and media sources in each of the five countries indicate the industry continues to employ this multipronged strategy throughout the SP policy's progression. Although this strategy is tailored towards each domestic context, the overall tobacco industry's trade strategy remains consistently focused on shifting the attention away from public health and towards the realm of trade and investment with more corporate-friendly allies. Governments seeking to implement SP need to be prepared to resist and counter the industry's multipronged trade strategy by avoiding trade diversions, exposing false industry legal and reputational claims, and monitoring third-party support. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

EDUCATION IN BUSINESS AND INDUSTRY.

ERIC Educational Resources Information Center

DECARLO, CHARLES R.; ROBINSON, ORMSBEE W.

CONTINUING EDUCATION IS DISCUSSED AS VITAL TO THE PROSPERITY OF BUSINESS AND INDUSTRY WHEN TECHNOLOGICAL CHANGES REQUIRE CONTINUAL READJUSTMENT OF JOB REQUIREMENTS. ROLES OF INDUSTRY, UNIVERSITIES, AND GOVERNMENT COOPERATING TO PROVIDE THE RESOURCES, MATERIALS, AND INCENTIVES FOR CONTINUING EDUCATION ARE PROPOSED. DISCUSSIONS INCLUDE--(1) PROBLEMS…

Research and Technology 2003

NASA Technical Reports Server (NTRS)

2004-01-01

The NASA Glenn Research Center at Lewis Field, in partnership with U.S. industries, universities, and other Government institutions, is responsible for developing critical technologies that address national priorities in aeropropulsion and space applications. Our work is focused on research for new aeropropulsion technologies, aerospace power, microgravity science (fluids and combustion), electric propulsion, and communications technologies for aeronautics, space, and aerospace applications. As NASA s premier center for aeropropulsion, aerospace power, and turbomachinery, our role is to conduct world-class research and to develop key technologies. We contribute to economic growth and national security through safe, superior, and environmentally compatible U.S. civil and military aircraft propulsion systems. Our Aerospace Power Program supports all NASA Enterprises and major programs, including the International Space Station, Advanced Space Transportation, and new initiatives in human and robotic exploration. Glenn Research Center leads NASA s research in the microgravity science disciplines of fluid physics, combustion science, and acceleration measurement. Almost every space shuttle science mission has had an experiment managed by NASA Glenn, and we have conducted a wide array of similar experiments on the International Space Station. The Glenn staff consists of over 3200 civil service employees and support service contractor personnel. Scientists and engineers comprise more than half of our workforce, with technical specialists, skilled workers, and an administrative staff supporting them. We aggressively strive for technical excellence through continuing education, increased diversity in our workforce, and continuous improvement in our management and business practices so that we can expand the boundaries of aeronautics, space, and aerospace technology. Glenn Research Center is a unique facility located in northeast Ohio. Situated on 350 acres of land adjacent to the Cleveland Hopkins International Airport, Glenn comprises more than 140 buildings, including 24 major facilities and over 500 specialized research and test facilities. Additional facilities are located at Plum Brook Station, which is about 50 miles west of Cleveland. Plum Brook Station has four large, major, world-class facilities for space research available for Government and industry programs. Knowledge is the end product of our activities. The R&T reports help make this knowledge fully available to potential users the aircraft engine industry, the space industry, the energy industry, the automotive industry, the aerospace industry, and others. It is organized so that a broad cross section of the community can readily use it. Each article begins with a short introductory paragraph that should prove valuable for the layperson. These articles summarize the progress made during the year in various technical areas and portray the technical and administrative support associated with Glenn s technology programs. We hope that this information is useful to all. If additional information is desired, readers are encouraged to contact the researchers identified at the end of each article and to visit Glenn on the World Wide Web at http://www.grc.nasa.gov.

What We Can Learn from Amazon for Clinical Decision Support Systems.

PubMed

Abid, Sidra; Keshavjee, Karim; Karim, Arsalan; Guergachi, Aziz

2017-01-01

Health care continue to lag behind other industries, such as retail and financial services, in the use of decision-support-like tools. Amazon is particularly prolific in the use of advanced predictive and prescriptive analytics to assist its customers to purchase more, while increasing satisfaction, retention, repeat-purchases and loyalty. How can we do the same in health care? In this paper, we explore various elements of the Amazon website and Amazon's data science and big data practices to gather inspiration for re-designing clinical decision support in the health care sector. For each Amazon element we identified, we present one or more clinical applications to help us better understand where Amazon's.

Promotion bureau warehouse system design. Case study in University of AA

NASA Astrophysics Data System (ADS)

Parwati, N.; Qibtiyah, M.

2017-12-01

The warehouse becomes one of the important parts in an industry. By having a good warehousing system, an industry can improve the effectiveness of its performance, so that profits for the company can continue to increase. Meanwhile, if it has a poorly organized warehouse system, it is feared there will be a decrease in the level of effectiveness of the industry itself. In this research, the object was warehousing system in promotion bureau of University AA. To improve the effectiveness of warehousing system, warehouse layout design is done by specifying categories of goods based on the flow of goods in and out of warehouse with ABC analysis method. In addition, the design of information systems to assist in controlling the system to support all the demand for every burreau and department in the university.

SiC Deep Ultraviolet Avalanche Photodetectors

DTIC Science & Technology

2010-10-01

L. Beck 1.00 Xiaogang Bai 1.00 4.00FTE Equivalent: 4Total Number: Names of Faculty Supported National Academy MemberPERCENT_SUPPORTEDNAME Joe...robust APDs capable of high gain or Geiger mode operation. Since the release of BAA 06-14, the applications originally discussed were de-emphasized...the applications identified in the original DUVAP BAA , or those for general DoD or industrial use. While GE will continue to evaluate potential

Power Lander for Support of Long-Term Lunar Presence

NASA Technical Reports Server (NTRS)

Joyner, Russ; Rodriguez, Gary

2004-01-01

Emerging industrial base and the consequent sustained manned Lunar presence will require consistent high power capacities. This paper proposes a first iteration design of a flyable electric power platform which could serve as an enabler of Lunar Development and Exploration. It is intended to support a small facility solo or an emerging industrial base as part of a grid. Lunar Missions, Habitats and Facilities stand to benefit from an expected decade of non-stop operation, the economics of scale, Commercial Off-The-Shelf (COTS) availability, standardization of design, and logistical support for Lunar encampments provided by this architecture. The unattended and unmanned vehicle design is to be man- and robotics-serviceable after delivery by current and proposed heavy-lift boosters. Design continuity within a family of systems will improve reliability through "lessons learned'' in the field. Further, various configurations of the proposed scalable architecture will provide reference platforms for the indigenous construction of similar power plant facilities from in-situ Lunar resources (ISRU). The baseline design should be directed towards those materials available on the Moon and expected to be manufacturable on-site within the first decade of operation.

White paper on continuous bioprocessing. May 20-21, 2014 Continuous Manufacturing Symposium.

PubMed

Konstantinov, Konstantin B; Cooney, Charles L

2015-03-01

There is a growing interest in realizing the benefits of continuous processing in biologics manufacturing, which is reflected by the significant number of industrial and academic researchers who are actively involved in the development of continuous bioprocessing systems. These efforts are further encouraged by guidance expressed in recent US FDA conference presentations. The advantages of continuous manufacturing include sustained operation with consistent product quality, reduced equipment size, high-volumetric productivity, streamlined process flow, low-process cycle times, and reduced capital and operating cost. This technology, however, poses challenges, which need to be addressed before routine implementation is considered. This paper, which is based on the available literature and input from a large number of reviewers, is intended to provide a consensus of the opportunities, technical needs, and strategic directions for continuous bioprocessing. The discussion is supported by several examples illustrating various architectures of continuous bioprocessing systems. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

Construction and operation of an industrial solid waste landfill at Portsmouth Gaseous Diffusion Plant, Piketon, Ohio

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-10-01

The US Department of Energy (DOE), Office of Waste Management, proposes to construct and operate a solid waste landfill within the boundary of the Portsmouth Gaseous Diffusion Plant (PORTS), Piketon, Ohio. The purpose of the proposed action is to provide PORTS with additional landfill capacity for non-hazardous and asbestos wastes. The proposed action is needed to support continued operation of PORTS, which generates non-hazardous wastes on a daily basis and asbestos wastes intermittently. Three alternatives are evaluated in this environmental assessment (EA): the proposed action (construction and operation of the X-737 landfill), no-action, and offsite shipment of industrial solid wastesmore » for disposal.« less

Varo-achro-phobia: the fear of broad spectrum zoom optics

NASA Astrophysics Data System (ADS)

Vogel, Steven; Pollica, Naomi

2015-05-01

Today's battlefield is evolving at light speed. Our war fighters are being tasked with highly complex missions requiring the very best technology our industry can offer. The demand for advanced ISR platforms is challenging designers and engineers in the optics industry to push the envelope and develop wider band solutions to support multiple and broadband sensor platforms. Recently, significant attention has been directed towards the development of optical systems that enable simultaneous operation in the visible and shortwave infrared spectral wavebands. This paper will present a review of the evolution of StingRay Optics' GhostSight™ continuous zoom optics that offer broad chromatic imaging capabilities from the visible through the shortwave infrared spectrum.

Assessing the differences and similarities between hospital chains and independents regarding revenues, profits, and community contributions.

PubMed

McDermott, Dennis R

2009-01-01

Hospital systems or chains continue to grow their market share relative to independent hospitals. This trend generates concerns among health care industry observers as historical performance suggests chains charge more for health care services than the independents while providing reduced contributions to their community. This study empirically assesses key performance measures of 67 acute-care hospitals in Virginia by testing if there are differences between chains and independents regarding total patient revenues, revenues per admission, profitability and community support, including charity care, bad debt, taxes paid and Medicaid participation. Implications to industry policy-makers as well as to hospital executives and marketing managers are then presented.

The elements of a commercial human spaceflight safety reporting system

NASA Astrophysics Data System (ADS)

Christensen, Ian

2017-10-01

In its report on the SpaceShipTwo accident the National Transportation Safety Board (NTSB) included in its recommendations that the Federal Aviation Administration (FAA) ;in collaboration with the commercial spaceflight industry, continue work to implement a database of lessons learned from commercial space mishap investigations and encourage commercial space industry members to voluntarily submit lessons learned.; In its official response to the NTSB the FAA supported this recommendation and indicated it has initiated an iterative process to put into place a framework for a cooperative safety data sharing process including the sharing of lessons learned, and trends analysis. Such a framework is an important element of an overall commercial human spaceflight safety system.

How the health belief model helps the tobacco industry: individuals, choice, and "information".

PubMed

Balbach, Edith D; Smith, Elizabeth A; Malone, Ruth E

2006-12-01

To analyse trial and deposition testimony of tobacco industry executives to determine how they use the concepts of "information" and "choice" and consider how these concepts are related to theoretical models of health behaviour change. We coded and analysed transcripts of trial and deposition testimony of 14 high-level executives representing six companies plus the Tobacco Institute. We conducted an interpretive analysis of industry executives' characterisation of the industry's role as information provider and the agency of tobacco consumers in making "choices". Tobacco industry executives deployed the concept of "information" as a mechanism that shifted to consumers full moral responsibility for the harms caused by tobacco products. The industry's role was characterised as that of impartial supplier of value-free "information", without regard to its quality, accuracy and truthfulness. Tobacco industry legal defences rely on assumptions congruent with and supported by individual rational choice theories, particularly those that emphasise individual, autonomous decision-makers. Tobacco control advocates and health educators must challenge the industry's preferred framing, pointing out that "information" is not value-free. Multi-level, multi-sectoral interventions are critical to tobacco use prevention. Over-reliance on individual and interpersonal rational choice models may have the effect of validating the industry's model of smoking and cessation behaviour, absolving it of responsibility and rendering invisible the "choices" the industry has made and continues to make in promoting the most deadly consumer product ever made.

Status and future trends of radiation processing in Brazil

NASA Astrophysics Data System (ADS)

Lugão, A. B.; Andrade, E.; Silva, L. G.

1998-06-01

Electron-beam and gamma irradiation of polymers are widely applied in Brazil today. The main applications are: - radio-induced crosslinking of wire and cable for automobile and appliance industry; - heat shrinkable tubes for appliance, automobile and electronic; - heat shrinkable packing for food processing industry; - sterilization of medical supplies and so on. Nevertheless, there are only a few industrial facilities about 20 years old in full operation at present and there are some new low energy machines for food packing. The reason for such absence of investment in this area was studied and the relation between automobile and appliance production with radiation processing was fully demonstrated for Brazil case. In conclusion, it was shown that the industry of radiation processing of polymers is likely to experience a strong growth based on the continuous increase in the production of automobiles and appliances. The R&D activities of IPEN are an important support for developing the necessary technology and developing the necessary confidence in the radiation as tool for economical and social growth.

40 CFR Table Tt-1 to Subpart Tt of... - Default DOC and Decay Rate Values for Industrial Waste Landfills

Code of Federal Regulations, 2013 CFR

2013-07-01

... Industrial Waste Landfills TT Table TT-1 to Subpart TT of Part 98 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Industrial Waste... for Industrial Waste Landfills Industry/Waste Type DOC(weight fraction, wet basis) k[dry climatea] (yr...

40 CFR Table Tt-1 to Subpart Tt of... - Default DOC and Decay Rate Values for Industrial Waste Landfills

Code of Federal Regulations, 2014 CFR

2014-07-01

... Industrial Waste Landfills TT Table TT-1 to Subpart TT of Part 98 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Industrial Waste... for Industrial Waste Landfills Industry/Waste Type DOC(weight fraction, wet basis) k[dry climatea] (yr...

Etude d'integration fonctionnelle du cycle de developpement des produits et des communautes de pratique virtuelles

NASA Astrophysics Data System (ADS)

Doumit, Nancy

Product development, subject to time constraints and system complexity, needs synchronous communication between different disciplines and locations in order to enable knowledge sharing. Being well supported, informal information flow increases productivity during product realization. Therefore, manufacturing industries are exploring the use of Enterprise Social Media (ESM) functionalities. This thesis explores the functional integration of formal information technologies such as Product Lifecycle Management (PLM) software with informal technologies as ESM through an industrial case study. Reviewing literature, the candidate has identified a gap between Virtual Communities of Practice (VCoP) and product development, as well as the correlation of PLM solutions and noncontrolled ESM in the aerospace industry. In order to disseminate a descriptive study of the current collaboration status, the author has undertaken online surveys for geodistant employees of the same department, semi-structured interviews and research among existing documentations. Subsequently, a Quality Functional Analysis is performed via two modified House of Quality matrices (PLM and ESM) to assign a convenient support for information transfer independently of its content maturity. Users' needs are categorized, and for each category a choice of platform is made with further recommendation regarding the use of the function or the need of human intervention. VCoP form an integrated part of the solution where employees support the technical content. Thus, essential roles and responsibilities are presented to maintain existing CoP and develop new ones. Finally, the candidate presents the limits of this research, gives recommendations for the manufacturing industry and suggests potential continuation of this study using PLM 2.0 with noncontrolled ESM tools.

Three Myths About Dietary Supplements … and How Knowing the Right Answers Is Good for Your Integrative Medicine Practice

PubMed Central

Israelsen, Loren; Lampe, Frank

2016-01-01

The use of safe and beneficial dietary supplements remains an important part of your patients’ healthy lifestyle—and supplements are likely an important part of your integrative medicine practice. Although issues surrounding potency, ingredient identification, adulteration, and the enforcement of existing laws are legitimate concerns for medical professionals and consumers, the responsible industry is actively working to raise quality standards for its products through a number of self-regulatory measures. These include education about and adoption of additional quality assurance initiatives, such as GMPs for botanical ingredients; better supply-chain management; adoption of improved identification and testing methodologies; an industry-wide product registry; the use of accredited third-party certifications and seals; and initiatives to promote widespread membership in the industry’s trade associations, which is a reliable indicator of a company’s support of and adherence to strict quality guidelines. Also, industry support of appropriate enforcement actions against problem players and products from the US Food and Drug Administration (FDA), the Federal Trade Commission (FTC), and states’ attorneys general continues in an effort to rid the market of unsafe and mislabeled products. PMID:27547162

Strategies for the startup of methanogenic inverse fluidized-bed reactors using colonized particles.

PubMed

Alvarado-Lassman, A; Sandoval-Ramos, A; Flores-Altamirano, M G; Vallejo-Cantú, N A; Méndez-Contreras, J M

2010-05-01

One of the inconveniences in the startup of methanogenic inverse fluidized-bed reactors (IFBRs) is the long period required for biofilm formation and stabilization of the system. Previous researchers have preferred to start up in batch mode to shorten stabilization times. Much less work has been done with continuous-mode startup for the IFBR configuration of reactors. In this study, we prepared two IFBRs with similar characteristics to compare startup times for batch- and continuous-operation modes. The reactors were inoculated with a small quantity of colonized particles and run for a period of 3 months, to establish the optimal startup strategy using synthetic media as a substrate (glucose as a source of carbon). After the startup stage, the continuous- and batch-mode reactors removed more than 80% of the chemical oxygen demand (COD) in 51 and 60 days of operation, respectively; however, at the end of the experiments, the continuous-mode reactor had more biomass attached to the support media than the batch-mode reactor. Both reactors developed fully covered support media, but only the continuous-mode reactor had methane yields close to the theoretical value that is typical of stable reactors. Then, a combined startup strategy was proposed, with industrial wastewater as the substrate, using a sequence of batch cycles followed by continuous operation, which allows stable operation at an organic loading rate of 20 g COD/L x d in 15 days. Using a fraction of colonized support as an inoculum presents advantages, with respect to previously reported strategies.

"A deep fragrance of academia": the Australian Tobacco Research Foundation.

PubMed

Chapman, S; Carter, S M; Peters, M

2003-12-01

(1) To review the history of the tobacco industry supported Australian Tobacco Research Foundation (ATRF)(1970-1994) for evidence of the industry's use of the Foundation to further its objectives that "more research was needed" on smoking and health and to promulgate the view that nicotine was not addictive. (2) To review efforts by public health advocates to discredit the ATRF as a public relations tool used by the Australian industry. Systematic search of previously internal industry documents released through the US Master Settlement Agreement. The ATRF was headed by prestigious Australian medical scientists, with at least one considered by the industry to be "industry positive". An international ATRF symposium on nicotine was vetted by the industry and heavily attended by industry approved scientists. Following sustained criticism from the health and medical community about the industry's creation of the ATRF to further its objectives, the ATRF's scientific committee was provoked to publicly declare in 1988 that smoking was a causative agent in disease. This criticism led to growing ATRF boycotts by scientists and substandard applications, causing the industry to see the ATRF as being poor value-for-money and eventually abandoning it. The raison d'etre for the ATRF's establishment was to allow the Australian industry to point to its continuing commitment to independent medical research, with the implied corollary that tobacco control measures were premature in the face of insufficient evidence about tobacco's harms. Sustained criticism of tobacco industry funded research schemes can undermine their credibility among the scientific community.

PACS industry in Korea

NASA Astrophysics Data System (ADS)

Kim, Hee-Joung

2002-05-01

PACS industry in Korea has been rapidly growing, since government had supported collaborative PACS project between industry and university hospital. In the beginning, PACS industry had focused on developing peripheral PACS solutions, while the Korea PACS society was being formed. A few companies had started developing and installing domestic large-scale full-PACS system for teaching hospitals. Several years later, many hospitals have installed full-PACS system with national policy of reimbursement for PACS exams in November 1999. Both experiences of full-PACS installation and national policy generated tremendous intellectual and technological expertise about PACS at all levels, clinical, hospital management, education, and industrial sectors. There are now more than 20 domestic PACS companies. They have enough experiences which are capable of installing a truly full-PACS system for large-scale teaching hospitals. As an example, a domestic company had installed more than 40 full-PACS systems within 2-3 years. Enough experiences of full-PACS installation in Korea lead PACS industry to start exporting their full-PACS solutions. However, further understanding and timely implementation of continuously evolving international standard and integrated healthcare enterprise concepts may be necessary for international leading of PACS technologies for the future.

Future Supply Chains Enabled by Continuous Processing-Opportunities Challenges May 20-21 2014 Continuous Manufacturing Symposium.

PubMed

Srai, Jagjit Singh; Badman, Clive; Krumme, Markus; Futran, Mauricio; Johnston, Craig

2015-03-01

This paper examines the opportunities and challenges facing the pharmaceutical industry in moving to a primarily "continuous processing"-based supply chain. The current predominantly "large batch" and centralized manufacturing system designed for the "blockbuster" drug has driven a slow-paced, inventory heavy operating model that is increasingly regarded as inflexible and unsustainable. Indeed, new markets and the rapidly evolving technology landscape will drive more product variety, shorter product life-cycles, and smaller drug volumes, which will exacerbate an already unsustainable economic model. Future supply chains will be required to enhance affordability and availability for patients and healthcare providers alike despite the increased product complexity. In this more challenging supply scenario, we examine the potential for a more pull driven, near real-time demand-based supply chain, utilizing continuous processing where appropriate as a key element of a more "flow-through" operating model. In this discussion paper on future supply chain models underpinned by developments in the continuous manufacture of pharmaceuticals, we have set out; The paper recognizes that although current batch operational performance in pharma is far from optimal and not necessarily an appropriate end-state benchmark for batch technology, the adoption of continuous supply chain operating models underpinned by continuous production processing, as full or hybrid solutions in selected product supply chains, can support industry transformations to deliver right-first-time quality at substantially lower inventory profiles. © 2015 The Authors. Journal of Pharmaceutical Sciences published by Wiley Periodicals, Inc. and the American Pharmacists Association. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

Midsouth veneer industry

Treesearch

Dennis M. May; John S. Vissage

1990-01-01

The USDA Forest Service, Southern Forest Experiment Station's latest survey of the Midsouth veneer industry shows the softwood veneer industry continuing its dominance as the hardwood veneer industry has continued to decline. The number of softwood mills has stabilized after years of growth, while both commercial and container hardwood mills have decreased in...

Department of Energy Fiscal Year 1984 authorization (conservation programs and the Energy Information Administration). Hearing before the Subcommittee on Energy Conservation and Supply of the Committee on Energy and Natural Resources, United States Senate, Ninety-Eighth Congress, First Session to review the Department of Energy's Fiscal Year 1984 budget request, March 8, 1983

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1983-01-01

Joseph J. Tribble and J. Erich Evered testified on the 1984 budget requests for DOE's conservation programs and the Energy Information Administration (EIA). Mr. Tribble described the conservation and renewable-energy programs which will continue despite the improved energy-supply situation and with federal support for that research which industry cannot handle alone. He disagreed with committee chairman Lowell Weicker over continued support for state and local energy grants and the transfer of funds for weatherization programs. Mr. Evered described EIA's 1983 accomplishments and its objectives for 1984. An appendix includes correspondence and responses to additional committee questions. (DCK)

2001 Industry Studies: Financial Services

DTIC Science & Technology

2001-01-01

financial services firms are also positioning to compete here and abroad with international firms. Advances in information technology continue to provide...future. A veritable revolution is taking place within the financial services industry. Globalization, information technology and continuing... technological infrastructure that must be protected. Industry vulnerabilities will continue to increase as use of the Internet , e-commerce, and e-banking become

Executive nurse career progression: skills, wisdom and realities.

PubMed

Ehrat, K S

2001-01-01

There are seven absolutes in an otherwise evolving health care industry. First, despite the amassed property, plant, and equipment, the industry is dominated by, and grounded in, human capital and functions on the basis of intellectual capital. Second, owing to its specialized nature, collaboration among disciplines and supports is required to achieve desired outcomes. Third, technologic, pharmacological, and biogenetic advancements continue to change the face of health care delivery, significantly contribute to escalating costs. The fourth absolute--misaligned economic incentives among the providers and payers--breeds competition and conflict. Fifth, economics in general, and reimbursement specifically, is the industry driver. In times of economic scarcity, competition for resources intensifies. A sixth absolute entails the increasing knowledge of health consumers and their access to heath information. Finally, there is a growing gap in ability to pay and wide variation in health care coverage. It is within this general context that executive nurse role advancement will be discussed.

The development of the ICME supply-chain: Route to ICME implementation and sustainment

NASA Astrophysics Data System (ADS)

Furrer, David; Schirra, John

2011-04-01

Over the past twenty years, integrated computational materials engineering (ICME) has emerged as a key engineering field with great promise. Models simulating materials-related phenomena have been developed and are being validated for industrial application. The integration of computational methods into material, process and component design has been a challenge, however, in part due to the complexities in the development of an ICME "supply-chain" that supports, sustains and delivers this emerging technology. ICME touches many disciplines, which results in a requirement for many types of computational-based technology organizations to be involved to provide tools that can be rapidly developed, validated, deployed and maintained for industrial applications. The need for, and the current state of an ICME supply-chain along with development and future requirements for the continued pace of introduction of ICME into industrial design practices will be reviewed within this article.

A new dynamic method for the rapid determination of the biodegradable dissolved organic carbon in drinking water.

PubMed

Ribas, F; Frias, J; Lucena, F

1991-10-01

A new method for the determination of biodegradable dissolved organic carbon (BDOC), which may be useful to the water industry, is proposed. It is a dynamic method that measures the BDOC of circulating water continuously pumped across a biofilm attached to a special support that fills a system of two glass columns. The BDOC value corresponds to the difference in DOC between inlet and outlet water samples. The sampling may be intermittent or continuous, but the process is continuous. The biofilms give good performances over periods of at least 1 year. The analytical results are not significantly different from those of other bioassays based on the use of indigenous bacteria and the total duration of analysis is between 2 and 3 h.

Marketing ‘less harmful, low-tar’ cigarettes is a key strategy of the industry to counter tobacco control in China

PubMed Central

Yang, Gonghuan

2014-01-01

While the ‘low-tar’ scheme has been widely recognised as a misleading tactic used by the tobacco industry to deceive the public about the true risks of cigarette smoking, a similar campaign using the slogan of ‘less harmful, low tar’ was launched by the Chinese tobacco industry, that is, State Tobacco Monopoly Administration/China National Tobacco Corporation and began to gain traction during the last decade. Despite the fact that no sufficient research evidence supports the claims made by the industry that these cigarettes are safer, the Chinese tobacco industry has continued to promote them using various health claims. As a result, the production and sales of ‘less harmful, low-tar’ cigarettes have increased dramatically since 2000. Recently, a tobacco industry senior researcher, whose main research area is ‘less harmful, low-tar’ cigarettes, was elected as an Academician to the prestigious Chinese Academy of Engineering for his contribution to developing ‘less harmful, low-tar’ cigarettes. The tobacco researcher's election caused an outcry from the tobacco control community and the general public in China. This paper discusses the Chinese tobacco industry's ‘less harmful, low-tar’ initiatives and calls for the Chinese government to stop the execution of this deceptive strategy for tobacco marketing. PMID:23349230

Marketing 'less harmful, low-tar' cigarettes is a key strategy of the industry to counter tobacco control in China.

PubMed

Yang, Gonghuan

2014-03-01

While the 'low-tar' scheme has been widely recognised as a misleading tactic used by the tobacco industry to deceive the public about the true risks of cigarette smoking, a similar campaign using the slogan of 'less harmful, low tar' was launched by the Chinese tobacco industry, that is, State Tobacco Monopoly Administration/China National Tobacco Corporation and began to gain traction during the last decade. Despite the fact that no sufficient research evidence supports the claims made by the industry that these cigarettes are safer, the Chinese tobacco industry has continued to promote them using various health claims. As a result, the production and sales of 'less harmful, low-tar' cigarettes have increased dramatically since 2000. Recently, a tobacco industry senior researcher, whose main research area is 'less harmful, low-tar' cigarettes, was elected as an Academician to the prestigious Chinese Academy of Engineering for his contribution to developing 'less harmful, low-tar' cigarettes. The tobacco researcher's election caused an outcry from the tobacco control community and the general public in China. This paper discusses the Chinese tobacco industry's 'less harmful, low-tar' initiatives and calls for the Chinese government to stop the execution of this deceptive strategy for tobacco marketing.

A Study of Reasons for Participation in Continuing Professional Education in the U.S. Nuclear Power Industry

ERIC Educational Resources Information Center

McCamey, Randy B.

2003-01-01

The need for workers in the U.S. nuclear power industry to continually update their knowledge, skills, and abilities is critical to the safe and reliable operation of the country's nuclear power facilities. To improve their skills, knowledge, and abilities, many professionals in the nuclear power industry participate in continuing professional…

A Largely Unsatisfied Need: Continuing Professional Development for Process and Process Plant Industries. A Summary. FEU/PICKUP Project Report.

ERIC Educational Resources Information Center

Geldhart, D.; Brown, A. S.

This summary report outlines the aims of a project that focused on provision of short courses for technical professionals in the chemical and allied process industry and the process plant industry. Continuing education needs of both companies and individuals, as well as corporate policies and attitudes toward continuing education and constraints…

26 CFR 1.103-9 - Interest on bonds to finance industrial parks.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 2 2010-04-01 2010-04-01 false Interest on bonds to finance industrial parks. 1.103-9 Section 1.103-9 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Items Specifically Excluded from Gross Income § 1.103-9 Interest on bonds to finance industrial...

When a drip becomes a flood: Lessons learned from Target Corporation's first large-scale business disruption.

PubMed

Hirsch, Kimberly D; Strawser, Bryan E

Business continuity practitioners routinely determine which teams in their companies are critical and undertake extensive and rigorous planning processes. But what happens when a business is faced with an unanticipated long-term disruption that primarily affects non-critical teams? How can a company use the essential principles of business continuity and crisis management in order to respond? This paper explores a 2013 business disruption experienced by Target Corporation at one of its headquarters locations caused by a leak in the water line for an ice machine. Challenges encountered and reviewed include supporting non-critical teams, leadership of a multi-week business disruption and how remote work technologies have changed traditional continuity alternative workspace solution planning. Lessons learned from this activation are presented with implications for business continuity and emergency management planning that are applicable to any industry.

Analysis of Development Environment and Development Trend of Chinese Tourism

NASA Astrophysics Data System (ADS)

Zhao, Liyun; Li, Lingzhi

2018-01-01

Since the reform and opening up of Chinese tourism industry, the scale has been continuously expanded and the income from tourism has been continuously increasing. Chinese tourism industry has become one of the most potential industries in the service industry. By analyzing the development environment and development trend of Chinese tourism industry from 2000 to 2016, we can understand the current situation of Chinese tourism development and provide suggestions for better development of Chinese tourism industry.

Clean Energy Manufacturing Initiative Solid-State Lighting

ScienceCinema

Thomas, Sunil; Edmond, John; Krames, Michael; Rama

2018-05-30

The importance of U.S. manufacturing for clean energy technologies, such as solid-state lighting (SSL), is paramount to increasing competitiveness in a global marketplace. SSLs are poised to drive the lighting market, worldwide. In order to continue that competitiveness and support further innovation, the time to invest in U.S. manufacturing of clean energy technologies is now. Across the country, companies developing innovative clean energy technologies find competitive advantages to manufacturing in the U.S. The Department of Energy's Building Technology Office SSL Manufacturing Roadmap is just one example of how we support manufacturing through convening industry perspectives on opportunities to significantly reduce risk, improve quality, increase yields, and lower costs.

Carrying Out and Developing the Glass Industry Vision and Roadmap

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michael Greenman

2007-06-14

In support of its obligations under the above-mentioned project, the GMIC performed the following tasks: (1) Provided two-way communications liaison services between the U.S. glass industry and the D.O.E. to ensure the needs and concerns of each party are effectively communicated to the other. (2) Updated and modified on a continuing basis and in response to evolving conditions within the glass industry, the goals and priorities outlined in the Glass Industry Vision and the Glass Technology Roadmap. (3) Established relationships with a wide variety of government and non-governmental organizations with interests in further improving the levels of technology, productivity andmore » environmental responsibility of the glass industry. (4) Canvassed the glass industry on an ongoing basis to determine overall and specific sector needs for technological development. (5) Fostered direct contacts between member companies and national laboratories to facilitate the development of individual company technology development. (6) Advised the DOE on the key elements of the solicitation process in support of the Glass Industry Vision and Technology Roadmap. In the course of this contract, the membership of the GMIC has grown to include over 70% of the glass industry. This gives it the ability to communicate persuasively with the vast majority of this energy intensive industry. One of the principal benefits of the existence of the GMIC is that, for the first time in this country, representative companies of all major sectors of the glass industry are now in regular communication with each other. Prior to the existence and activity of the GMIC, companies and individuals in the flat glass, container glass, fiber glass and specialty glass sectors rarely had contact with each other, in spite of the fact that they all face similar challenges and can benefit from pre-competitive research conducted to the benefit of the broad industry. The development of innovations in the industry under cost-shared DOE/industry research projects such as new melting technologies, sensors and controls, modeling programs, energy efficiency tools, etc. has led to substantial increases in energy efficiency in the industry. Increased energy efficiency results in increased job opportunities in the industry that has been negatively impacted by increases in energy costs, globalization and increased environmental controls.« less

40 CFR Table Tt-1 to Subpart Tt - Default DOC and Decay Rate Values for Industrial Waste Landfills

Code of Federal Regulations, 2012 CFR

2012-07-01

... Industrial Waste Landfills TT Table TT-1 to Subpart TT Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Industrial Waste Landfills Pt. 98, Subpt. TT, Table TT Table TT-1 to Subpart TT—Default DOC and Decay Rate Values for Industrial...

Treatment of metal-laden hazardous wastes with advanced clean coal technology by-products. Quarterly report, December 30, 1996--March 30, 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-12-31

The objective of this project is to utilize coal ashes to process hazardous materials such as industrial waste water treatment residues, contaminated soils, and air pollution control dusts from the metal industry and municipal waste incineration. This report describes the activities of the project team during the reporting period. The principal work has focused upon continuing evaluation of aged samples from Phase 1, planning supportive laboratory studies for Phase 2, completing scholarly work, reestablishing MAX Environmental Technologies, Inc., as the subcontractor for the field work of Phase 2, proposing two presentations for later in 1997, and making and responding tomore » several outside contacts.« less

The Club of Rome and its computer.

PubMed

Chase, S

1973-03-01

When the Club of Rome, an assemblage of 75 scientists and businessmen gathered to study the ''predicament of mankind in the face of technology growing at an exponential rate,'' issued its computer study it launched a battle between proponents of gross national product and those favoring quality of life. The computer simulation studied the interaction of population growth, food supply, inductrial production, resource use, and pollution under varying conditions. It concluded that our industrial system is headed for too many people in relation to food and living space, too much production in relation to natural resources, and for too much pollution. This will affect all countries. The traditional economists say the continued growth of the gross national product is the only way to ensure better living conditions while the ecologists point out that quality of life is being destroyed. The author cites arguments both for and against the quality-of-life view. The problem is that continued industrial growth creates wants as well as satisfying them and leads to waste as well as needful consumption. John Stuart Mill stated 100 years ago that the world could not support continued technological expansion and society must reach an equilibrium. 8 steps must be taken if the planet is to reach such an equilibrium, which is essential to the survival of all: 1) a zero rate of population growth, although there may be variations between countries with some over and some under; 2) a zero rate of industrial output with overall new investment equal to overall rate of industrial depreciation; 3) a policy of recycling and conserving material resources; 4) an adequate budget of food, shelter, clothing, health services, and education for every human being (a budget which does not allow for autos and air conditioning); 5) a sharp decline in consumption of material goods in affluent societies with a corresponding shift to more services and an increase in material goods for low energy societies; 6) pure science to be supported without limitation so long as it remains on the blackboard and a sharp increase in social science expenditures to help deal with the severe cultural changes which are coming; 7) evaluation of the effects of applied science or technology before a given innovation goes into mass production; 8) some type of organized world community to administer and safeguard a steady-state society.

Segmented annular combustor

DOEpatents

Reider, Samuel B.

1979-01-01

An industrial gas turbine engine includes an inclined annular combustor made up of a plurality of support segments each including inner and outer walls of trapezoidally configured planar configuration extents and including side flanges thereon interconnected by means of air cooled connector bolt assemblies to form a continuous annular combustion chamber therebetween and wherein an air fuel mixing chamber is formed at one end of the support segments including means for directing and mixing fuel within a plenum and a perforated header plate for directing streams of air and fuel mixture into the combustion chamber; each of the outer and inner walls of each of the support segments having a ribbed lattice with tracks slidably supporting porous laminated replaceable panels and including pores therein for distributing combustion air into the combustion chamber while cooling the inner surface of each of the panels by transpiration cooling thereof.

The National Nanotechnology Initiative: Research and Development Leading to a Revolution in Technology and Industry. Supplement to the President’s 2012 Budget

DTIC Science & Technology

2011-02-01

safety. In addition , the NIFA SBIR program will continue broadly supporting innovation using nanotechnology in agriculture and food applications... addition , the funded research in the AFRI Emerging Food Safety Issues program area will characterize the toxicity, accumulation, and trophic...goals. To obtain additional information regarding the NSTC, visit the NSTC website at http://www.ostp.gov/cs/nstc. About the Office of Science and

WHAT DOESNT GET MEASURED - DOESNT GET DONE: IMPLEMENTING CONTINUOUS PROCESS IMPROVEMENT IN THE AIR FORCE RESERVE

DTIC Science & Technology

2016-04-01

Practical Problem Solving Method RMD Resource Management Decision ROI Return on Investment SECAF Secretary of the Air Force SECNAV Secretary of...AFSO21 and now AF CPI, this program seeks to train and certify an organic cadre of CPI practitioners to support the use of its standard problem solving ...process known as the AF Practical Problem Solving Method (PPSM) to solve mission critical process deficiencies. The PPSM leverages several industry

Financialization impedes climate change mitigation: Evidence from the early American solar industry

PubMed Central

Jerneck, Max

2017-01-01

The article investigates how financialization impedes climate change mitigation by examining its effects on the early history of one low-carbon industry, solar photovoltaics in the United States. The industry grew rapidly in the 1970s, as large financial conglomerates acquired independent firms. While providing needed financial support, conglomerates changed the focus from existing markets in consumer applications toward a future utility market that never materialized. Concentration of the industry also left it vulnerable to the corporate restructuring of the 1980s, when the conglomerates were dismantled and solar divisions were pared back or sold off to foreign firms. Both the move toward conglomeration, when corporations became managed as stock portfolios, and its subsequent reversal were the result of increased financial dominance over corporate governance. The American case is contrasted with the more successful case of Japan, where these changes to corporate governance did not occur. Insulated from shareholder pressure and financial turbulence, Japanese photovoltaics manufacturers continued to expand investment throughout the 1980s when their American rivals were cutting back. The study is informed by Joseph Schumpeter’s theory of creative destruction and Hyman Minsky’s theory of financialization, along with economic sociology. By highlighting the tenuous and conflicting relation between finance and production that shaped the early history of the photovoltaics industry, the article raises doubts about the prevailing approach to mitigate climate change through carbon pricing. Given the uncertainty of innovation and the ease of speculation, it will do little to spur low-carbon technology development without financial structures supporting patient capital. PMID:28435862

Financialization impedes climate change mitigation: Evidence from the early American solar industry.

PubMed

Jerneck, Max

2017-03-01

The article investigates how financialization impedes climate change mitigation by examining its effects on the early history of one low-carbon industry, solar photovoltaics in the United States. The industry grew rapidly in the 1970s, as large financial conglomerates acquired independent firms. While providing needed financial support, conglomerates changed the focus from existing markets in consumer applications toward a future utility market that never materialized. Concentration of the industry also left it vulnerable to the corporate restructuring of the 1980s, when the conglomerates were dismantled and solar divisions were pared back or sold off to foreign firms. Both the move toward conglomeration, when corporations became managed as stock portfolios, and its subsequent reversal were the result of increased financial dominance over corporate governance. The American case is contrasted with the more successful case of Japan, where these changes to corporate governance did not occur. Insulated from shareholder pressure and financial turbulence, Japanese photovoltaics manufacturers continued to expand investment throughout the 1980s when their American rivals were cutting back. The study is informed by Joseph Schumpeter's theory of creative destruction and Hyman Minsky's theory of financialization, along with economic sociology. By highlighting the tenuous and conflicting relation between finance and production that shaped the early history of the photovoltaics industry, the article raises doubts about the prevailing approach to mitigate climate change through carbon pricing. Given the uncertainty of innovation and the ease of speculation, it will do little to spur low-carbon technology development without financial structures supporting patient capital.

"A deep fragrance of academia": the Australian Tobacco Research Foundation

PubMed Central

Chapman, S; Carter, S; Peters, M

2003-01-01

Objectives: (1) To review the history of the tobacco industry supported Australian Tobacco Research Foundation (ATRF)(1970–1994) for evidence of the industry's use of the Foundation to further its objectives that "more research was needed" on smoking and health and to promulgate the view that nicotine was not addictive. (2) To review efforts by public health advocates to discredit the ATRF as a public relations tool used by the Australian industry. Methods: Systematic search of previously internal industry documents released through the US Master Settlement Agreement. Results: The ATRF was headed by prestigious Australian medical scientists, with at least one considered by the industry to be "industry positive". An international ATRF symposium on nicotine was vetted by the industry and heavily attended by industry approved scientists. Following sustained criticism from the health and medical community about the industry's creation of the ATRF to further its objectives, the ATRF's scientific committee was provoked to publicly declare in 1988 that smoking was a causative agent in disease. This criticism led to growing ATRF boycotts by scientists and substandard applications, causing the industry to see the ATRF as being poor value-for-money and eventually abandoning it. Conclusions: The raison d'etre for the ATRF's establishment was to allow the Australian industry to point to its continuing commitment to independent medical research, with the implied corollary that tobacco control measures were premature in the face of insufficient evidence about tobacco's harms. Sustained criticism of tobacco industry funded research schemes can undermine their credibility among the scientific community. PMID:14645947

Advanced Industrial Materials (AIM) program. Annual progress report. FY 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-04-01

The Advanced Industrial Materials (AIM) Program underwent a major transformation in Fiscal Year 1995 and these changes have continued to the present. When the Program was established in 1990 as the Advanced Industrial Concepts (AIC) Materials Program, the mission was to conduct applied research and development to bring materials and processing technologies from the knowledge derived from basic research to the maturity required for the end use sectors for commercialization. In 1995, the Office of Industrial Technologies (OIT) made radical changes in structure and procedures. All technology development was directed toward the seven `Vision Industries` that use about 80% ofmore » industrial energy and generated about 90% of industrial wastes. These are: aluminium; chemical; forest products; glass; metal casting; refineries; and steel. OIT is working with these industries, through appropriate organizations, to develop Visions of the desired condition of each industry some 20 or 25 years in the future and then to prepare Road Maps and Implementation Plans to enable them to reach their goals. The mission of AIM has, therefore, changed to `Support development and commercialization of new or improved materials to improve productivity, product quality, and energy efficiency in the major process industries.` Though AIM remains essentially a National Laboratory Program, it is necessary that each project have industrial partners, including suppliers to, and customers of, the seven industries. Now, well into FY 1996, the transition is nearly complete and the AIM Program remains healthy and productive, thanks to the superb investigators and Laboratory Program Managers. Separate abstracts have been indexed into the energy database for articles from this report.« less

The Research and Training Activities for the Joint Institute for Aeronautics and Acoustics

NASA Technical Reports Server (NTRS)

Cantwell, Brian

1995-01-01

This proposal requests continued support for the program of activities to be undertaken by the Ames-Stanford Joint Institute for Aeronautics and Acoustics during the period 1 Oct. 1995 - 30 Sept. 1996. The emphasis in this program is on training and research in experimental and computational methods with application to aerodynamics, acoustics and the important interactions between them. The program comprises activities in active flow control, Large Eddy Simulation of jet noise, flap aerodynamics and acoustics and high lift modeling studies. During the proposed period there will be a continued emphasis on the interaction between NASA Ames, Stanford University and Industry, particularly in connection with the high lift activities.

A Reliable Handoff Mechanism for Mobile Industrial Wireless Sensor Networks.

PubMed

Ma, Jian; Yang, Dong; Zhang, Hongke; Gidlund, Mikael

2017-08-04

With the prevalence of low-power wireless devices in industrial applications, concerns about timeliness and reliability are bound to continue despite the best efforts of researchers to design Industrial Wireless Sensor Networks (IWSNs) to improve the performance of monitoring and control systems. As mobile devices have a major role to play in industrial production, IWSNs should support mobility. However, research on mobile IWSNs and practical tests have been limited due to the complicated resource scheduling and rescheduling compared with traditional wireless sensor networks. This paper proposes an effective mechanism to guarantee the performance of handoff, including a mobility-aware scheme, temporary connection and quick registration. The main contribution of this paper is that the proposed mechanism is implemented not only in our testbed but in a real industrial environment. The results indicate that our mechanism not only improves the accuracy of handoff triggering, but also solves the problem of ping-pong effect during handoff. Compared with the WirelessHART standard and the RSSI-based approach, our mechanism facilitates real-time communication while being more reliable, which can help end-to-end packet delivery remain an average of 98.5% in the scenario of mobile IWSNs.

Smuggling as the "key to a combined market": British American Tobacco in Lebanon.

PubMed

Nakkash, R; Lee, K

2008-10-01

To understand the strategy of British American Tobacco (BAT) and other transnational tobacco companies (TTCs) to gain access to the Lebanese market, which has remained relatively closed under monopoly ownership and political instability. Analysis of internal industry documents, local language secondary sources and industry publications. TTCs have relied on legal and illegal channels to supply the Lebanese market since at least the 1970s. Available documents suggest smuggling has been an important component of BAT's market entry strategy, transported in substantial quantities via middlemen for sale in Lebanon and neighbouring countries. TTCs took advantage of weak and unstable governance, resulting in uncertainty over the Regie's legal status, and continued to supply the contraband trade despite appeals by the government to cease undermining its revenues. Since the end of the civil war in the early 1990s, continued uncertainty about the tobacco monopoly amid political instability has encouraged TTCs to seek a legal presence in the country, while continuing to achieve substantial sales through contraband. Evidence of the complicity of TTCs in cigarette smuggling extends to Lebanon and the Middle East where this trade has especially benefited from weak governance and chronic political instability. The regional nature of TTC strategy supports strong international cooperation under the Framework Convention on Tobacco Control to tackle the problem.

"Fly-by-Wireless": A Revolution in Aerospace Vehicle Architecture for Instrumentation and Control

NASA Technical Reports Server (NTRS)

Studor, George

2007-01-01

Aerospace vehicle programs have always counted on the cables and connectors to provide power, grounding, data and time synchronization throughout a vehicle's life-cycle. Even with numerous improvements, wiring and connector problems and sensors continue to be key failure points, causing many hours of troubleshooting and replacement. Costly flight delays have been precipitated by the need to troubleshoot cables/connections, and/or repair a sensor. Wiring continues to be too expensive to remove once it is installed, even with the weight penalties. Miles of test instrumentation and low flight sensor wires still plague the aerospace industry. New technology options for data connectivity, processing and micro/nano manufacturing are making it possible to retrofit existing vehicles, like the Space Shuttle. New vehicles can now develop architectures that provide for and take advantage of alternatives to wired connectivity. This project motivates the aerospace industry and technology providers to establish: (1) A new emphasis for system engineering approaches to reduce cables and connectors. (2) Provisions for modularity and accessibility in the vehicle architecture. (3) A set of technologies that support alternatives to wired connectivity.

Toward industrial scale synthesis of ultrapure singlet nanoparticles with controllable sizes in a continuous gas-phase process

NASA Astrophysics Data System (ADS)

Feng, Jicheng; Biskos, George; Schmidt-Ott, Andreas

2015-10-01

Continuous gas-phase synthesis of nanoparticles is associated with rapid agglomeration, which can be a limiting factor for numerous applications. In this report, we challenge this paradigm by providing experimental evidence to support that gas-phase methods can be used to produce ultrapure non-agglomerated “singlet” nanoparticles having tunable sizes at room temperature. By controlling the temperature in the particle growth zone to guarantee complete coalescence of colliding entities, the size of singlets in principle can be regulated from that of single atoms to any desired value. We assess our results in the context of a simple analytical model to explore the dependence of singlet size on the operating conditions. Agreement of the model with experimental measurements shows that these methods can be effectively used for producing singlets that can be processed further by many alternative approaches. Combined with the capabilities of up-scaling and unlimited mixing that spark ablation enables, this study provides an easy-to-use concept for producing the key building blocks for low-cost industrial-scale nanofabrication of advanced materials.

40 CFR Table I-2 to Subpart I of... - Examples of Fluorinated GHGs Used by the Electronics Industry

Code of Federal Regulations, 2014 CFR

2014-07-01

... the Electronics Industry I Table I-2 to Subpart I of Part 98 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Electronics... the Electronics Industry Product type Fluorinated GHGs and fluorinated heat transfer fluids used...

Present and future contraception: does discovery of targets lead to new contraceptives?

PubMed

Jensen, Jeffrey T

2015-01-01

Although many highly effective methods of reversible contraception are available, high rates of unintended pregnancy and abortion provide evidence that current methods do not meet the needs of all couples. In recent years, a number of highly specific targets have been identified in key pathways that regulate the development of male and female gametes. Support for development of novel approaches has moved from industry to governmental and foundation funders. Continued public funding will be needed to move promising leads into clinical trials.

LGBT Roundtable Discussion: Meet-up and Mentoring Discussion

NASA Astrophysics Data System (ADS)

2014-03-01

The LGBT+ Physicists group welcomes those who identify as gender sexual minorities, as LGBTQQIAAP+, or as allies to participate in a round-table discussion on mentoring physicists. The session will provide an opportunity to learn and discuss successful mentoring strategies at different career stages for physicists in all environments, including academia, industry, etc. Attendees are encouraged to attend a social event to follow the panel to continue to network. Allies are especially welcome at this event to learn how to support and mentor LGBT+ physicists.

Technology Opportunities to Reduce U.S. Greenhouse Gas Emissions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pena, Federico

1997-10-01

This report serves as the technology basis of a needed national climate change technology strategy, with the confidence that a strong technology R&D program will deliver a portfolio of technologies with the potential to provide very substantial greenhouse gas emission reductions along with continued economic growth. Much more is needed to define such a strategy, including identification of complementary deployment policies and analysis to support the seeping and prioritization of R&D programs. A national strategy must be based upon governmental, industrial, and academic partnerships.

Center for Coal-Derived Low Energy Materials for Sustainable Construction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jewell, Robert; Robl, Tom; Rathbone, Robert

2012-06-30

The overarching goal of this project was to create a sustained center to support the continued development of new products and industries that manufacture construction materials from coal combustion by-products or CCB’s (e.g., cements, grouts, wallboard, masonry block, fillers, roofing materials, etc). Specific objectives includes the development of a research kiln and associated system and the formulation and production of high performance low-energy, low-CO2 emitting calcium sulfoaluminate (CAS) cement that utilize coal combustion byproducts as raw materials.

Food safety regulations in Australia and New Zealand Food Standards.

PubMed

Ghosh, Dilip

2014-08-01

Citizens of Australia and New Zealand recognise that food security is a major global issue. Food security also affects Australia and New Zealand's status as premier food exporting nations and the health and wellbeing of the Australasian population. Australia is uniquely positioned to help build a resilient food value chain and support programs aimed at addressing existing and emerging food security challenges. The Australian food governance system is fragmented and less transparent, being largely in the hands of government and semi-governmental regulatory authorities. The high level of consumer trust in Australian food governance suggests that this may be habitual and taken for granted, arising from a lack of negative experiences of food safety. In New Zealand the Ministry of Primary Industries regulates food safety issues. To improve trade and food safety, New Zealand and Australia work together through Food Standards Australia New Zealand (FSANZ) and other co-operative agreements. Although the potential risks to the food supply are dynamic and constantly changing, the demand, requirement and supply for providing safe food remains firm. The Australasian food industry will need to continually develop its system that supports the food safety program with the help of scientific investigations that underpin the assurance of what is and is not safe. The incorporation of a comprehensive and validated food safety program is one of the total quality management systems that will ensure that all areas of potential problems are being addressed by industry. © 2014 Society of Chemical Industry.

Space Product Development: NASA Partnering With Industry For Out of This World Results

NASA Technical Reports Server (NTRS)

Nall, Mark E.; Casas, Joe; Powers, Blake; Henderson, Robin N. (Technical Monitor)

2002-01-01

True space commercialization can only be achieved through having the broadest possible industrial participation. Commercial paradigms focused simply on commercial launch operations are not viable since there are limited payload launch opportunities in terms of satellites and similar vehicles, and there are not yet sufficient markets to support large-scale operations and innovation. What is required to expand commercial operations to the point of viability is a broad base of industry that understands the opportunities of commercial space and microgravity operations, and is eager to take advantage of it. Interesting non-aerospace companies in commercial space and microgravity research or operations is a major challenge, since these companies must be educated about the opportunities, introduced into the process in an effective and comfortable manner, and encouraged to continue and expand their work in this area. The NASA Space Product Development Program does this through fifteen Commercial Space Centers located across the United States, each focusing on a different area of interest to industry rather than of interest to NASA. These Centers serve as a consortium of industry, academia, and government, bringing the synergistic effects of membership to the benefit of all. This paper will discuss the guiding philosophies of this program, its organization, the successes obtained by industry in a variety of fields, and the success NASA is experiencing in building the broad base of industry needed to achieve true space commercialization.

Unlocking the potential of supported liquid phase catalysts with supercritical fluids: low temperature continuous flow catalysis with integrated product separation

PubMed Central

Franciò, Giancarlo; Hintermair, Ulrich; Leitner, Walter

2015-01-01

Solution-phase catalysis using molecular transition metal complexes is an extremely powerful tool for chemical synthesis and a key technology for sustainable manufacturing. However, as the reaction complexity and thermal sensitivity of the catalytic system increase, engineering challenges associated with product separation and catalyst recovery can override the value of the product. This persistent downstream issue often renders industrial exploitation of homogeneous catalysis uneconomical despite impressive batch performance of the catalyst. In this regard, continuous-flow systems that allow steady-state homogeneous turnover in a stationary liquid phase while at the same time effecting integrated product separation at mild process temperatures represent a particularly attractive scenario. While continuous-flow processing is a standard procedure for large volume manufacturing, capitalizing on its potential in the realm of the molecular complexity of organic synthesis is still an emerging area that requires innovative solutions. Here we highlight some recent developments which have succeeded in realizing such systems by the combination of near- and supercritical fluids with homogeneous catalysts in supported liquid phases. The cases discussed exemplify how all three levels of continuous-flow homogeneous catalysis (catalyst system, separation strategy, process scheme) must be matched to locate viable process conditions. PMID:26574523

Unlocking the potential of supported liquid phase catalysts with supercritical fluids: low temperature continuous flow catalysis with integrated product separation.

PubMed

Franciò, Giancarlo; Hintermair, Ulrich; Leitner, Walter

2015-12-28

Solution-phase catalysis using molecular transition metal complexes is an extremely powerful tool for chemical synthesis and a key technology for sustainable manufacturing. However, as the reaction complexity and thermal sensitivity of the catalytic system increase, engineering challenges associated with product separation and catalyst recovery can override the value of the product. This persistent downstream issue often renders industrial exploitation of homogeneous catalysis uneconomical despite impressive batch performance of the catalyst. In this regard, continuous-flow systems that allow steady-state homogeneous turnover in a stationary liquid phase while at the same time effecting integrated product separation at mild process temperatures represent a particularly attractive scenario. While continuous-flow processing is a standard procedure for large volume manufacturing, capitalizing on its potential in the realm of the molecular complexity of organic synthesis is still an emerging area that requires innovative solutions. Here we highlight some recent developments which have succeeded in realizing such systems by the combination of near- and supercritical fluids with homogeneous catalysts in supported liquid phases. The cases discussed exemplify how all three levels of continuous-flow homogeneous catalysis (catalyst system, separation strategy, process scheme) must be matched to locate viable process conditions. © 2015 The Authors.

Clean Energy Manufacturing Initiative Solid-State Lighting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomas, Sunil; Edmond, John; Krames, Michael

2014-09-23

The importance of U.S. manufacturing for clean energy technologies, such as solid-state lighting (SSL), is paramount to increasing competitiveness in a global marketplace. SSLs are poised to drive the lighting market, worldwide. In order to continue that competitiveness and support further innovation, the time to invest in U.S. manufacturing of clean energy technologies is now. Across the country, companies developing innovative clean energy technologies find competitive advantages to manufacturing in the U.S. The Department of Energy's Building Technology Office SSL Manufacturing Roadmap is just one example of how we support manufacturing through convening industry perspectives on opportunities to significantly reducemore » risk, improve quality, increase yields, and lower costs.« less

Clean Energy Manufacturing Initiative Solid-State Lighting Video

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomas, Sunil; Edmond, John; Krames, Michael

2014-09-23

The importance of U.S. manufacturing for clean energy technologies, such as solid-state lighting (SSL), is paramount to increasing competitiveness in a global marketplace. SSLs are poised to drive the lighting market, worldwide. In order to continue that competitiveness and support further innovation, the time to invest in U.S. manufacturing of clean energy technologies is now. Across the country, companies developing innovative clean energy technologies find competitive advantages to manufacturing in the U.S. The Department of Energy's Building Technology Office SSL Manufacturing Roadmap is just one example of how we support manufacturing through convening industry perspectives on opportunities to significantly reducemore » risk, improve quality, increase yields, and lower costs.« less

Life Sciences Start-ups in Switzerland: CTI and its Support for Young Entrepreneurs.

PubMed

Sekanina, Klara

2014-12-01

According to the Global Entrepreneurship Monitor 2013, perceived opportunities to start a business in Switzerland are high and rank above average compared to other innovation-based countries. 2013 was a record year for start-ups in Switzerland. Around 40,000 new businesses were recorded in the commercial register and the trend is set to continue. There are two main criteria that lead to success, particularly for science- or technology- based start-ups: first of all, it is the business or product idea itself, and secondly it is the entrepreneurial team. CTI is supporting innovation in a manner that responds to a need in the market identified by industry.

Clean Energy Manufacturing Initiative Solid-State Lighting Video

ScienceCinema

Thomas, Sunil; Edmond, John; Krames, Michael; Raman, Sudhakar

2018-01-16

The importance of U.S. manufacturing for clean energy technologies, such as solid-state lighting (SSL), is paramount to increasing competitiveness in a global marketplace. SSLs are poised to drive the lighting market, worldwide. In order to continue that competitiveness and support further innovation, the time to invest in U.S. manufacturing of clean energy technologies is now. Across the country, companies developing innovative clean energy technologies find competitive advantages to manufacturing in the U.S. The Department of Energy's Building Technology Office SSL Manufacturing Roadmap is just one example of how we support manufacturing through convening industry perspectives on opportunities to significantly reduce risk, improve quality, increase yields, and lower costs.

Regulatory Perspectives on Continuous Pharmaceutical Manufacturing: Moving From Theory to Practice: September 26-27, 2016, International Symposium on the Continuous Manufacturing of Pharmaceuticals.

PubMed

Nasr, Moheb M; Krumme, Markus; Matsuda, Yoshihiro; Trout, Bernhardt L; Badman, Clive; Mascia, Salvatore; Cooney, Charles L; Jensen, Keith D; Florence, Alastair; Johnston, Craig; Konstantinov, Konstantin; Lee, Sau L

2017-11-01

Continuous manufacturing plays a key role in enabling the modernization of pharmaceutical manufacturing. The fate of this emerging technology will rely, in large part, on the regulatory implementation of this novel technology. This paper, which is based on the 2nd International Symposium on the Continuous Manufacturing of Pharmaceuticals, describes not only the advances that have taken place since the first International Symposium on Continuous Manufacturing of Pharmaceuticals in 2014, but the regulatory landscape that exists today. Key regulatory concepts including quality risk management, batch definition, control strategy, process monitoring and control, real-time release testing, data processing and management, and process validation/verification are outlined. Support from regulatory agencies, particularly in the form of the harmonization of regulatory expectations, will be crucial to the successful implementation of continuous manufacturing. Collaborative efforts, among academia, industry, and regulatory agencies, are the optimal solution for ensuring a solid future for this promising manufacturing technology. Copyright © 2017 American Pharmacists Association®. All rights reserved.

Infrastructure support for a waste management institute. Final project report, September 12, 1994--September 11, 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-11-01

North Carolina A and T State University has completed the development of an infrastructure for the interdisciplinary Waste Management Institute (WMI). The Interdisciplinary Waste Management Institute (WMI) was approved in June, 1994 by the General Administration of the University of North Carolina as an academic support unit with research and public service functions. The mission of the WMI is to enhance awareness and understanding of waste management issues and to provide instructional support including research and outreach. The goals of WMI are as follows: increase the number of minority professionals who will work in waste management fields; develop cooperative andmore » exchange programs involving faculty, students, government, and industry; serve as institutional sponsor of public awareness workshops and lecture series; and support interdisciplinary research programs. The vision of the WMI is to provide continued state-of-the art environmental educational programs, research, and outreach.« less

Developing and fostering a dynamic program for training in veterinary pathology and clinical pathology: veterinary students to post-graduate education.

PubMed

Lairmore, Michael D; Oglesbee, Michael; Weisbrode, Steve E; Wellman, Maxey; Rosol, Thomas; Stromberg, Paul

2007-01-01

Recent reports project a deficiency of veterinary pathologists, indicating a need to train highly qualified veterinary pathologists, particularly in academic veterinary medicine. The need to provide high-quality research training for veterinary pathologists has been recognized by the veterinary pathology training program of the Ohio State University (OSU) since its inception. The OSU program incorporates elements of both residency training and graduate education into a unified program. This review illustrates the components and structure of the training program and reflects on future challenges in training veterinary pathologists. Key elements of the OSU program include an experienced faculty, dedicated staff, and high-quality students who have a sense of common mission. The program is supported through cultural and infrastructure support. Financial compensation, limited research funding, and attractive work environments, including work-life balance, will undoubtedly continue to be forces in the marketplace for veterinary pathologists. To remain competitive and to expand the ability to train veterinary pathologists with research skills, programs must support strong faculty members, provide appropriate infrastructure support, and seek active partnerships with private industry to expand program opportunities. Shortages of trained faculty may be partially resolved by regional cooperation to share faculty expertise or through the use of communications technology to bridge distances between programs. To foster continued interest in academic careers, training programs will need to continue to evolve and respond to trainees' needs while maintaining strong allegiances to high-quality pathology training. Work-life balance, collegial environments that foster a culture of respect for veterinary pathology, and continued efforts to reach out to veterinary students to provide opportunities to learn about the diverse careers offered in veterinary pathology will pay long-term dividends for the future of the profession.

Developing and Fostering a Dynamic Program for Training in Veterinary Pathology and Clinical Pathology: Veterinary Students to Post-graduate Education

PubMed Central

Lairmore, Michael D.; Oglesbee, Michael; Weisbrode, Steve E.; Wellman, Maxey; Rosol, Thomas; Stromberg, Paul

2011-01-01

Recent reports project a deficiency of veterinary pathologists, indicating a need to train highly qualified veterinary pathologists, particularly in academic veterinary medicine. The need to provide high-quality research training for veterinary pathologists has been recognized by the veterinary pathology training program of the Ohio State University (OSU) since its inception. The OSU program incorporates elements of both residency training and graduate education into a unified program. This review illustrates the components and structure of the training program and reflects on future challenges in training veterinary pathologists. Key elements of the OSU program include an experienced faculty, dedicated staff, and high-quality students who have a sense of common mission. The program is supported through cultural and infrastructure support. Financial compensation, limited research funding, and attractive work environments, including work–life balance, will undoubtedly continue to be forces in the marketplace for veterinary pathologists. To remain competitive and to expand the ability to train veterinary pathologists with research skills, programs must support strong faculty members, provide appropriate infrastructure support, and seek active partnerships with private industry to expand program opportunities. Shortages of trained faculty may be partially resolved by regional cooperation to share faculty expertise or through the use of communications technology to bridge distances between programs. To foster continued interest in academic careers, training programs will need to continue to evolve and respond to trainees' needs while maintaining strong allegiances to high-quality pathology training. Work–life balance, collegial environments that foster a culture of respect for veterinary pathology, and continued efforts to reach out to veterinary students to provide opportunities to learn about the diverse careers offered in veterinary pathology will pay long-term dividends for the future of the profession. PMID:18287474

Just-in-Time Correntropy Soft Sensor with Noisy Data for Industrial Silicon Content Prediction.

PubMed

Chen, Kun; Liang, Yu; Gao, Zengliang; Liu, Yi

2017-08-08

Development of accurate data-driven quality prediction models for industrial blast furnaces encounters several challenges mainly because the collected data are nonlinear, non-Gaussian, and uneven distributed. A just-in-time correntropy-based local soft sensing approach is presented to predict the silicon content in this work. Without cumbersome efforts for outlier detection, a correntropy support vector regression (CSVR) modeling framework is proposed to deal with the soft sensor development and outlier detection simultaneously. Moreover, with a continuous updating database and a clustering strategy, a just-in-time CSVR (JCSVR) method is developed. Consequently, more accurate prediction and efficient implementations of JCSVR can be achieved. Better prediction performance of JCSVR is validated on the online silicon content prediction, compared with traditional soft sensors.

Just-in-Time Correntropy Soft Sensor with Noisy Data for Industrial Silicon Content Prediction

PubMed Central

Chen, Kun; Liang, Yu; Gao, Zengliang; Liu, Yi

2017-01-01

Development of accurate data-driven quality prediction models for industrial blast furnaces encounters several challenges mainly because the collected data are nonlinear, non-Gaussian, and uneven distributed. A just-in-time correntropy-based local soft sensing approach is presented to predict the silicon content in this work. Without cumbersome efforts for outlier detection, a correntropy support vector regression (CSVR) modeling framework is proposed to deal with the soft sensor development and outlier detection simultaneously. Moreover, with a continuous updating database and a clustering strategy, a just-in-time CSVR (JCSVR) method is developed. Consequently, more accurate prediction and efficient implementations of JCSVR can be achieved. Better prediction performance of JCSVR is validated on the online silicon content prediction, compared with traditional soft sensors. PMID:28786957

Managing laboratory automation in a changing pharmaceutical industry

PubMed Central

Rutherford, Michael L.

1995-01-01

The health care reform movement in the USA and increased requirements by regulatory agencies continue to have a major impact on the pharmaceutical industry and the laboratory. Laboratory management is expected to improve effciency by providing more analytical results at a lower cost, increasing customer service, reducing cycle time, while ensuring accurate results and more effective use of their staff. To achieve these expectations, many laboratories are using robotics and automated work stations. Establishing automated systems presents many challenges for laboratory management, including project and hardware selection, budget justification, implementation, validation, training, and support. To address these management challenges, the rationale for project selection and implementation, the obstacles encountered, project outcome, and learning points for several automated systems recently implemented in the Quality Control Laboratories at Eli Lilly are presented. PMID:18925014

EMSL Outlook Review 2005

DOE Office of Scientific and Technical Information (OSTI.GOV)

Campbell, Allison A.

2005-04-01

The William R. Wiley Environmental Molecular Sciences Laboratory (EMSL) is a national user facility that contains state-of-the-art instrumentation and expert resources available for use by researchers from academia, industry, and the national laboratory system. The facility is supported by the U.S. Department of Energy’s (DOE) Biological and Environmental Research Program, but the research conducted within the facility benefits many funding agencies, including other branches of DOE, the National Institutes of Health, the National Science Foundation, and the Department of Defense. EMSL requires the continued funding and support of its stakeholders and clients to continue to grow its mission, build itsmore » reputation as a sought-after national user facility with cutting-edge capabilities, and attract high-profile users who will work to solve the most critical scientific challenges that affect DOE and the nation. In this vein, this document has been compiled to provide these stakeholders and clients with a review document that provides an abundance of information on EMSL’s history, current research activities, and proposed future direction.« less

Responding to a Strong Economy. Alberta Apprenticeship and Industry Training Board 2001-2002 Annual Report.

ERIC Educational Resources Information Center

Alberta Learning, Edmonton. Apprenticeship and Industry Training.

In 2001-2002, the Alberta Apprenticeship and Industry Training Board continued its collaboration with industry, government, and educators to maintain high standards of training and improve access to technical training. The board continued to strengthen the network of local and provincial apprenticeship committees, occupational committees, and…

Partnerships between government and industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mitchell, G.R.

1995-12-31

The author describes the future as one of unprecedented change as industry and other institutions become immersed in a system of global commerce driven by fast moving technologies that had their origin in the United States. These trends are expected to intensify as the pace of scientific and technological discovery and innovation continues unabated. The end of the Cold War is viewed as an opportunity to position the United States for leadership in this rapidly changing environment. The role of science and technology in achieving sustained economic growth and improved competitiveness and to address what government can do to helpmore » the process along is examined in detail. Statistical data on globalization of trade and market shares of various countries is given along with the participation by multi-national corporations. The historical aspects of technology ages and their development are discussed along with the history of government technology policy. New policies will improve the climate for innovation with government, industry, and the academic community developing interactive and supportive roles. 22 figs.« less

The effect of urbanization and industrialization on carbon emissions in Turkey: evidence from ARDL bounds testing procedure.

PubMed

Pata, Ugur Korkut

2018-03-01

This paper examines the dynamic short- and long-term relationship between per capita GDP, per capita energy consumption, financial development, urbanization, industrialization, and per capita carbon dioxide (CO 2 ) emissions within the framework of the environmental Kuznets curve (EKC) hypothesis for Turkey covering the period from 1974 to 2013. According to the results of the autoregressive distributed lag bounds testing approach, an increase in per capita GDP, per capita energy consumption, financial development, urbanization, and industrialization has a positive effect on per capita CO 2 emissions in the long term, and also the variables other than urbanization increase per capita CO 2 emissions in the short term. In addition, the findings support the validity of the EKC hypothesis for Turkey in the short and long term. However, the turning points obtained from long-term regressions lie outside the sample period. Therefore, as the per capita GDP increases in Turkey, per capita CO 2 emissions continue to increase.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sotiropoulos, Fotis; Marr, Jeffrey D.G.; Milliren, Christopher

In January 2010, the University of Minnesota, along with academic and industry project partners, began work on a four year project to establish new facilities and research in strategic areas of wind energy necessary to move the nation towards a goal of 20% wind energy by 2030. The project was funded by the U.S. Department of Energy with funds made available through the American Recovery and Reinvestment Act of 2009. $7.9M of funds were provided by DOE and $3.1M was provided through matching funds. The project was organized into three Project Areas. Project Area 1 focused on design and developmentmore » of a utility scale wind energy research facility to support research and innovation. The project commissioned the Eolos Wind Research Field Station in November of 2011. The site, located 20 miles from St. Paul, MN operates a 2.5MW Clipper Liberty C-96 wind turbine, a 130-ft tall sensored meteorological tower and a robust sensor and data acquisition network. The site is operational and will continue to serve as a site for innovation in wind energy for the next 15 years. Project Areas 2 involved research on six distinct research projects critical to the 20% Wind Energy by 2030 goals. The research collaborations involved faculty from two universities, over nine industry partners and two national laboratories. Research outcomes include new knowledge, patents, journal articles, technology advancements, new computational models and establishment of new collaborative relationships between university and industry. Project Area 3 focused on developing educational opportunities in wind energy for engineering and science students. The primary outcome is establishment of a new graduate level course at the University of Minnesota called Wind Engineering Essentials. The seminar style course provides a comprehensive analysis of wind energy technology, economics, and operation. The course is highly successful and will continue to be offered at the University. The vision of U.S. DOE to establish unique, open-access research facilities and creation of university-industry research collaborations in wind energy were achieved through this project. The University of Minnesota, through the establishment of the Eolos Wind Energy Consortium and the Eolos Wind Research Field Station continue to develop new research collaborations with industry partners.« less

Continuous Improvement in the Industrial and Management Systems Engineering Programme at Kuwait University

ERIC Educational Resources Information Center

Aldowaisan, Tariq; Allahverdi, Ali

2016-01-01

This paper describes the process employed by the Industrial and Management Systems Engineering programme at Kuwait University to continuously improve the programme. Using a continuous improvement framework, the paper demonstrates how various qualitative and quantitative analyses methods, such as hypothesis testing and control charts, have been…

The Future of Electricity Resource Planning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kahrl, Fredrich; Mills, Andrew; Lavin, Luke

Electricity resource planning is the process of identifying longer-term investments to meet electricity reliability requirements and public policy goals at a reasonable cost. Resource planning processes provide a forum for regulators, electric utilities, and electricity industry stakeholders to evaluate the economic, environmental, and social benefits and costs of different investment options. By facilitating a discussion on future goals, challenges and strategies, resource planning processes often play an important role in shaping utility business decisions. Resource planning emerged more than three decades ago in an era of transition, where declining electricity demand and rising costs spurred fundamental changes in electricity industrymore » regulation and structure. Despite significant changes in the industry, resource planning continues to play an important role in supporting investment decision making. Over the next two decades, the electricity industry will again undergo a period of transition, driven by technological change, shifting customer preferences and public policy goals. This transition will bring about a gradual paradigm shift in resource planning, requiring changes in scope, approaches and methods. Even as it changes, resource planning will continue to be a central feature of the electricity industry. Its functions — ensuring the reliability of high voltage (“bulk”) power systems, enabling oversight of regulated utilities and facilitating low-cost compliance with public policy goals — are likely to grow in importance as the electricity industry enters a new period of technological, economic and regulatory change. This report examines the future of electricity resource planning in the context of a changing electricity industry. The report examines emerging issues and evolving practices in five key areas that will shape the future of resource planning: (1) central-scale generation, (2) distributed generation, (3) demand-side resources, (4) transmission and (5) uncertainty and risk management. The analysis draws on a review of recent resource plans for 10 utilities that reflect some of the U.S. electricity industry’s extensive diversity.« less

Production Methods in Industrial Microbiology.

ERIC Educational Resources Information Center

Gaden, Elmer L., Jr.

1981-01-01

Compares two methods (batch and continuous) in which microorganisms are used to produce industrial chemicals. Describes batch and continuous stirred-tank reactors and offers reasons why the batch method may be preferred. (JN)

Light Water Reactor Sustainability Program Reactor Safety Technologies Pathway Technical Program Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Corradini, M. L.; Peko, D.; Farmer, M.

In the aftermath of the March 2011 multi-unit accident at the Fukushima Daiichi nuclear power plant (Fukushima), the nuclear community has been reassessing certain safety assumptions about nuclear reactor plant design, operations and emergency actions, particularly with respect to extreme events that might occur and that are beyond each plant’s current design basis. Because of our significant domestic investment in nuclear reactor technology (99 operating reactors in the fleet of commercial LWRs with five under construction), the United States has been a major leader internationally in these activities. The U.S. nuclear industry is voluntarily pursuing a number of additional safetymore » initiatives. The NRC continues to evaluate and, where deemed appropriate, establish new requirements for ensuring adequate protection of public health and safety in the occurrence of low probability events at nuclear plants; (e.g., mitigation strategies for beyond design basis events initiated by external events like seismic or flooding initiators). The DOE has also played a major role in the U.S. response to the Fukushima accident. Initially, DOE worked with the Japanese and the international community to help develop a more complete understanding of the Fukushima accident progression and its consequences, and to respond to various safety concerns emerging from uncertainties about the nature of and the effects from the accident. DOE R&D activities are focused on providing scientific and technical insights, data, analyses methods that ultimately support industry efforts to enhance safety. These activities are expected to further enhance the safety performance of currently operating U.S. nuclear power plants as well as better characterize the safety performance of future U.S. plants. In pursuing this area of R&D, DOE recognizes that the commercial nuclear industry is ultimately responsible for the safe operation of licensed nuclear facilities. As such, industry is considered the primary “end user” of the results from this DOE-sponsored work. The response to the Fukushima accident has been global, and there is a continuing multinational interest in collaborations to better quantify accident consequences and to incorporate lessons learned from the accident. DOE will continue to seek opportunities to facilitate collaborations that are of value to the U.S. industry, particularly where the collaboration provides access to vital data from the accident or otherwise supports or leverages other important R&D work. The purpose of the Reactor Safety Technology R&D is to improve understanding of beyond design basis events and reduce uncertainty in severe accident progression, phenomenology, and outcomes using existing analytical codes and information gleaned from severe accidents, in particular the Fukushima Daiichi events. This information will be used to aid in developing mitigating strategies and improving severe accident management guidelines for the current light water reactor fleet.« less

Light Water Reactor Sustainability Program: Reactor Safety Technologies Pathway Technical Program Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Corradini, M. L.

In the aftermath of the March 2011 multi-unit accident at the Fukushima Daiichi nuclear power plant (Fukushima), the nuclear community has been reassessing certain safety assumptions about nuclear reactor plant design, operations and emergency actions, particularly with respect to extreme events that might occur and that are beyond each plant’s current design basis. Because of our significant domestic investment in nuclear reactor technology (99 operating reactors in the fleet of commercial LWRs with five under construction), the United States has been a major leader internationally in these activities. The U.S. nuclear industry is voluntarily pursuing a number of additional safetymore » initiatives. The NRC continues to evaluate and, where deemed appropriate, establish new requirements for ensuring adequate protection of public health and safety in the occurrence of low probability events at nuclear plants; (e.g., mitigation strategies for beyond design basis events initiated by external events like seismic or flooding initiators). The DOE has also played a major role in the U.S. response to the Fukushima accident. Initially, DOE worked with the Japanese and the international community to help develop a more complete understanding of the Fukushima accident progression and its consequences, and to respond to various safety concerns emerging from uncertainties about the nature of and the effects from the accident. DOE R&D activities are focused on providing scientific and technical insights, data, analyses methods that ultimately support industry efforts to enhance safety. These activities are expected to further enhance the safety performance of currently operating U.S. nuclear power plants as well as better characterize the safety performance of future U.S. plants. In pursuing this area of R&D, DOE recognizes that the commercial nuclear industry is ultimately responsible for the safe operation of licensed nuclear facilities. As such, industry is considered the primary “end user” of the results from this DOE-sponsored work. The response to the Fukushima accident has been global, and there is a continuing multinational interest in collaborations to better quantify accident consequences and to incorporate lessons learned from the accident. DOE will continue to seek opportunities to facilitate collaborations that are of value to the U.S. industry, particularly where the collaboration provides access to vital data from the accident or otherwise supports or leverages other important R&D work. The purpose of the Reactor Safety Technology R&D is to improve understanding of beyond design basis events and reduce uncertainty in severe accident progression, phenomenology, and outcomes using existing analytical codes and information gleaned from severe accidents, in particular the Fukushima Daiichi events. This information will be used to aid in developing mitigating strategies and improving severe accident management guidelines for the current light water reactor fleet.« less

Physics in Industry: A Case Study

NASA Astrophysics Data System (ADS)

Pratt-Ferguson, Ben

2007-10-01

Often ignored and sometimes even considered ``black sheep'' by the university & government-lab physicists, many industrial physicists continue making valuable scientific contributions in diverse areas, from computer science to aero and thermo-dynamics, communications, mathematics, engineering, and simulation, to name a few. This talk will focus on what industrial physicists do, what preparations are beneficial to obtaining a first industrial job, and what the business environment is like for physicists. The case study will be that of the author, starting with undergraduate and graduate studies and continuing on to jobs in industry.

Current Status and Future Potential of Transcatheter Interventions in Congenital Heart Disease.

PubMed

Kenny, Damien P; Hijazi, Ziyad M

2017-03-17

Percutaneous therapies for congenital heart disease have evolved rapidly in the past 3 decades. This has occurred despite limited investment from industry and support from regulatory bodies resulting in a lack of specific device development. Indeed, many devices remain off-label with a best-fit approach often required, spurning an innovative culture within the subspecialty, which had arguably laid the foundation for many of the current and evolving structural heart interventions. Challenges remain, not least encouraging device design focused on smaller infants and the inevitable consequences of somatic growth. Data collection tools are emerging but remain behind adult cardiology and cardiac surgery and leading to partial blindness as to the longer-term consequences of our interventions. Tail coating on the back of developments in other fields of adult intervention will soon fail to meet the expanding needs for more precise interventions and biological materials. Increasing collaboration with surgical colleagues will require development of dedicated equipment for hybrid interventions aimed at minimizing the longer-term consequences of scar to the heart. Therefore, great challenges remain to ensure that children and adults with congenital heart disease continue to benefit from an exponential growth in minimally invasive interventions and technology. This can only be achieved through a concerted collaborative approach from physicians, industry, academia, and regulatory bodies supporting great innovators to continue the philosophy of thinking beyond the limits that has been the foundation of our specialty for the past 50 years. © 2017 American Heart Association, Inc.

Electronic health records: postadoption physician satisfaction and continued use.

PubMed

Wright, Edward; Marvel, Jon

2012-01-01

One goal of public-policy makers in general and health care managers in particular is the adoption and efficient utilization of electronic health record (EHR) systems throughout the health care industry. Consequently, this investigation focused on the effects of known antecedents of technology adoption on physician satisfaction with EHR technology and the continued use of such systems. The American Academy of Family Physicians provided support in the survey of 453 physicians regarding their satisfaction with their EHR use experience. A conceptual model merging technology adoption and computer user satisfaction models was tested using structural equation modeling. Results indicate that effort expectancy (ease of use) has the most substantive effect on physician satisfaction and the continued use of EHR systems. As such, health care managers should be especially sensitive to the user and computer interface of prospective EHR systems to avoid costly and disruptive system selection mistakes.

[Stem cell research and science and technology policy in Japan].

PubMed

Yashiro, Yoshimi

2011-12-01

In this paper I review the present condition of the regeneration medicine research using pluripotency and a somatic stem cell, and I describe the subject of the science and technology policy in Japan towards realization of regeneration medicine. The Japanese Ministry of Education, Culture, Sports, Science and Technology (MEXT) supported research promotion by the prompt action in 2007 when establishment of the iPS cell was reported by Shinya Yamanaka. Although the hospitable support of the Japanese government to an iPS cell is continued still now, there are some problems in respect of the support to other stem cell researches, and industrialization of regeneration medicine. In order to win a place in highly competitive area of investigation, MEXT needs to change policy so that funds may be widely supplied also to stem cell researches other than iPS cell research.

Demand-driven water withdrawals by Chinese industry: a multi-regional input-output analysis

NASA Astrophysics Data System (ADS)

Zhang, Bo; Chen, Z. M.; Zeng, L.; Qiao, H.; Chen, B.

2016-03-01

With ever increasing water demands and the continuous intensification of water scarcity arising from China's industrialization, the country is struggling to harmonize its industrial development and water supply. This paper presents a systems analysis of water withdrawals by Chinese industry and investigates demand-driven industrial water uses embodied in final demand and interregional trade based on a multi-regional input-output model. In 2007, the Electric Power, Steam, and Hot Water Production and Supply sector ranks first in direct industrial water withdrawal (DWW), and Construction has the largest embodied industrial water use (EWU). Investment, consumption, and exports contribute to 34.6%, 33.3%, and 30.6% of the national total EWU, respectively. Specifically, 58.0%, 51.1%, 48.6%, 43.3%, and 37.5% of the regional EWUs respectively in Guangdong, Shanghai, Zhejiang, Jiangsu, and Fujian are attributed to international exports. The total interregional import/export of embodied water is equivalent to about 40% of the national total DWW, of which 55.5% is associated with the DWWs of Electric Power, Steam, and Hot Water Production and Supply. Jiangsu is the biggest interregional exporter and deficit receiver of embodied water, in contrast to Guangdong as the biggest interregional importer and surplus receiver. Without implementing effective water-saving measures and adjusting industrial structures, the regional imbalance between water availability and water demand tends to intensify considering the water impact of domestic trade of industrial products. Steps taken to improve water use efficiency in production, and to enhance embodied water saving in consumption are both of great significance for supporting China's water policies.

Industrial Water Analysis Program: A Critical Study.

DTIC Science & Technology

1983-09-01

Patterson Air Force Base, Ohio UMAMUION lTATEMNT A APtO.6UPbhtd3WJ 83 11 04 014’ X. .. . INDUSTRIAL WATER ANALYSIS PROGRAM: A CRITICAL STUDY Dennis C...Twhoo-17 (ATC) Wright-FPafewon AFB O 44 3 1S. KEY WORDS (Continue on reverse aide if necessary and identify by block number) Industrial Water Analysis ...Boiler Water Analysis Preservation Procedures Air Force Industrial Water Stabilization Procedures 20. ABSTRACT (Continue on reverse side it necessary and

The Business Value of Superior Energy Performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

McKane, Aimee; Scheihing, Paul; Evans, Tracy

Industrial facilities participating in the U.S. Department of Energy’s (US DOE) Superior Energy Performance (SEP) program are finding that it provides them with significant business value. This value starts with the implementation of ISO 50001-Energy management system standard, which provides an internationally-relevant framework for integration of energy management into an organization’s business processes. The resulting structure emphasizes effective use of available data and supports continual improvement of energy performance. International relevance is particularly important for companies with a global presence or trading interests, providing them with access to supporting ISO standards and a growing body of certified companies representing themore » collective knowledge of communities of practice. This paper examines the business value of SEP, a voluntary program that builds on ISO 50001, inviting industry to demonstrate an even greater commitment through third-party verification of energy performance improvement to a specified level of achievement. Information from 28 facilities that have already achieved SEP certification will illustrate key findings concerning both the value and the challenges from SEP/ISO 50001 implementation. These include the facilities’ experience with implementation, internal and external value of third-party verification of energy performance improvement; attractive payback periods and the importance of SEP tools and guidance. US DOE is working to bring the program to scale, including the Enterprise-Wide Accelerator (SEP for multiple facilities in a company), the Ratepayer-Funded Program Accelerator (supporting tools for utilities and program administrators to include SEP in their program offerings), and expansion of the program to other sectors and industry supply chains.« less

Uranium mining industry views on ICRP statement on radon.

PubMed

Takala, J

2012-01-01

In 2009, the International Commission on Radiological Protection issued a statement on radon which stated that the dose conversion factor for radon progeny would likely double, and the calculation of risk from radon should move to a dosimetric approach, rather than the longstanding epidemiological approach. Through the World Nuclear Association, whose members represent over 90% of the world's uranium production, industry has been examining this issue with a goal of offering expertise and knowledge to assist with the practical implementation of these evolutionary changes to evaluating the risk from radon progeny. Industry supports the continuing use of the most current epidemiological data as a basis for risk calculation, but believes that further examination of these results is needed to better understand the level of conservatism in the potential epidemiological-based risk models. With regard to adoption of the dosimetric approach, industry believes that further work is needed before this is a practical option. In particular, this work should include a clear demonstration of the validation of the dosimetric model which includes how smoking is handled, the establishment of a practical measurement protocol, and the collection of relevant data for modern workplaces. Industry is actively working to address the latter two items. Copyright © 2012. Published by Elsevier Ltd.

When will on-orbit servicing be part of the space enterprise?

NASA Astrophysics Data System (ADS)

Hastings, Daniel E.; Putbrese, Benjamin L.; La Tour, Paul A.

2016-10-01

The space industry is currently at a significant inflection point. Over the past decades, many spacecraft at geosynchronous orbit have continued a trend towards increasingly massive and longer-lasting satellites, and while they do represent some of the most exquisite, highest-performing satellites ever launched, some experts now feel that such trends are unsustainable and are beginning to place increasing strain on the underlying industry. To support current and future spacecraft, on-orbit servicing (OOS) infrastructures have been proposed, which would provide services such as repair, rescue, refueling, and upgrading of customer spacecraft in order to alleviate the identified space industry trends. In this paper, system dynamics modeling is used to assess various scenarios for OOS incorporation into the overall space industry, by evaluating its long-term effects on the design, cost, and underlying experience of a reference geosynchronous constellation. This system dynamics model is based heavily in behavioral economics' Prospect Theory, with such concepts as anchoring and loss aversion factoring heavily into the overall simulation of the space industry. The primary conclusion of this analysis was that relatively low costs and substantial incorporation of servicing capabilities into customer architectures are likely to be necessary to ensure long-term sustainability of such a project. Finally, several policy implications for an OOS infrastructure are outlined.

The National Carbon Capture Center at the Power Systems Development Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

2014-12-30

The National Carbon Capture Center (NCCC) at the Power Systems Development Facility supports the Department of Energy (DOE) goal of promoting the United States’ energy security through reliable, clean, and affordable energy produced from coal. Work at the NCCC supports the development of new power technologies and the continued operation of conventional power plants under CO 2 emission constraints. The NCCC includes adaptable slipstreams that allow technology development of CO 2 capture concepts using coal-derived syngas and flue gas in industrial settings. Because of the ability to operate under a wide range of flow rates and process conditions, research atmore » the NCCC can effectively evaluate technologies at various levels of maturity and accelerate their development path to commercialization. During its first contract period, from October 1, 2008, through December 30, 2014, the NCCC designed, constructed, and began operation of the Post-Combustion Carbon Capture Center (PC4). Testing of CO 2 capture technologies commenced in 2011, and through the end of the contract period, more than 25,000 hours of testing had been achieved, supporting a variety of technology developers. Technologies tested included advanced solvents, enzymes, membranes, sorbents, and associated systems. The NCCC continued operation of the existing gasification facilities, which have been in operation since 1996, to support the advancement of technologies for next-generation gasification processes and pre-combustion CO 2 capture. The gasification process operated for 13 test runs, supporting over 30,000 hours combined of both gasification and pre-combustion technology developer testing. Throughout the contract period, the NCCC incorporated numerous modifications to the facilities to accommodate technology developers and increase test capabilities. Preparations for further testing were ongoing to continue advancement of the most promising technologies for future power generation processes.« less

Continuation of Employment Training for Students in the Shell Fisheries Industry. Final Report. 1981-1982.

ERIC Educational Resources Information Center

Cape May County Vocational Schools, NJ.

A project to provide training in the shell fishing industries was continued into its second year to develop entry-level skills for employment and provide instruction and hands-on experience through infusing the existing Marine Science program. Results from a survey of instructors and individuals involved in the industry were used to develop a…

The relationship between paediatricians and commerce.

PubMed

Hilliard, Tom; Chambers, Timothy

2006-03-01

The interaction between doctors and commerce, particularly the pharmaceutical industry, has recently been subject to increasing scrutiny. Doctors are now exposed to mounting influence from industry as it spends large amounts of money on marketing, is heavily involved with continuing medical education and sponsors a major proportion of research. Conflicts of interest may exist on both sides of the relationship: doctors can be manipulated and companies need to be profitable. Paediatricians are just as open to this influence as are other members of the medical profession. There is evidence that clinical practice is altered by interaction with industry, although doctors appear to deny the likelihood of being influenced. There are significant concerns over the increasing involvement of the pharmaceutical industry with research, although the regulation of the industry continues to be strengthened and the process of research is becoming more transparent. Disclosure of conflicts of interest involving authorship is now common practice and should extend to all facets of the relationship. However, collaboration continues to be necessary in order to develop new therapies, maximise research and particularly in paediatrics, to test medications in children. Paediatricians need to be aware of the sources of influence and understand current guidelines so that interactions with industry continue to be appropriate.

Industry-Supported Team Students' Projects.

ERIC Educational Resources Information Center

Glozman, Vladimir

The industry-supported team students' project enhances professional, intellectual, and personal development of students while addressing the needs of local industry. In addition to achieving academic excellence, the students are exposed to industry requirements, and excel in effective oral communication and cooperative teamwork. The teamwork…

Bulls, Bears, and Birds: Preparing the Financial Industry for an Avian Influenza Pandemic.

PubMed

Maldin, Beth; Inglesby, Thomas V; Nuzzo, Jennifer B; Lien, Onora; Gronvall, Gigi Kwik; Toner, Eric; O'Toole, Tara

2005-01-01

Bulls, Bears, and Birds: Preparing the Financial Industry for an Avian Influenza Pandemic was a half day symposium on avian influenza for senior leaders and decision makers from the financial sector with responsibility for business continuity, health, and security. The event brought together experts and leaders from the medical, public health, business continuity, and financial communities to appraise financial industry leaders on the threat of avian influenza and to offer suggestions regarding what the financial industry could do to prepare and respond.

Abandoning pipelines working group regulatory issues

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The history of hydrocarbon development in Louisiana and off its coast is one of the interdependence of technological innovation, entrepreneurial risk-taking, resource management, judicial decisions, legislation, marketing, employee good will, infrastructure and support services, coupled with favorable geologic structures that made early exploration and development relatively easy. Mariners sailing off the coast of Louisiana and Texas in the 1600`s recorded one of the earliest known natural oil seeps. They shrugged it off as unimportant, as there was no market for the substance they witnessed. The seepage, however, provided a tiny clue to the vast storehouse of hydrocarbons trapped in themore » earth`s crust extending from the uplands, through Louisiana`s swamps and marshes, and into the subaqueous habitats of the Gulf of Mexico-the world`s ninth largest body of water. In all cases, each move into a new geographic province required considerable change in operation philosophy and in the science supporting the exploration and development activity. As technology changed, or was developed to meet the industry`s needs, new frontiers were explored. However, with time-as is the case with any nonrenewable resource-fields and wells lost their productive life. They had to be abandoned. In fact, the Minerals Management Service suggests that within the next 10 years the offshore industry will remove 150 platforms per year, or nearly half of the current number of production units. The industry will be asked to dispose of nearly one unit every 2.4 days. If this is the case, abandonment issues are going to continue to surface.« less

Preserving the nuclear option: The AIAA position paper on space nuclear power

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allen, D.M.; Bennett, G.L.; El-Genk, M.S.

1996-03-01

In response to published reports about the decline in funding for space nuclear power, the Board of Directors of the American Institute of Aeronautics and Astronautics (AIAA) approved a position paper in March 1995 that recommends (1) development and support of an integrated space nuclear power program by DOE, NASA and DoD; (2) Congressional support for the program; (3) advocacy of the program by government and industry leaders; and (4) continuation of cooperation between the U.S. and other countries to advance nuclear power source technology and to promote safety. This position paper has been distributed to various people having oversightmore » of the U.S. space nuclear power program. {copyright} {ital 1996 American Institute of Physics.}« less

SPIN-UP and Preparing Undergraduate Physics Majors for Careers in Industry

NASA Astrophysics Data System (ADS)

Howes, Ruth

2011-03-01

Seven years ago, the Strategic Programs for Innovations in Undergraduate Physics (SPIN-UP) Report produced by the National Task Force on Undergraduate Physics identified several key characteristics of thriving undergraduate physics departments including steps these departments had taken to prepare students better for careers in industry. Today statistical data from AIP shows that almost 40% of students graduating with a degree in physics seek employment as soon as they graduate. Successful undergraduate physics programs have taken steps to adapt their rigorous physics programs to ensure that graduating seniors have the skills they need to enter the industrial workplace as well as to go on to graduate school in physics. Typical strategies noted during a series of SPIN-UP workshops funded by a grant from NSF to APS, AAPT, and AIP include flexible curricula, early introduction of undergraduates to research techniques, revised laboratory experiences that provide students with skills they need to move directly into jobs, and increased emphasis on ``soft'' skills such as communication and team work. Despite significant success, undergraduate programs face continuing challenges in preparing students to work in industry, most significantly the fact that there is no job called ``physicist'' at the undergraduate level. supported by grant NSF DUE-0741560.

Can the generic antiretroviral industry support access to a universal antiretroviral regimen?

PubMed

Amole, Carolyn D; Middlecote, Caroline; Prabhu, Vineet R; Kumarasamy, N

2017-07-01

The generic antiretroviral (ARV) industry played a critical role in the massive scale-up of HIV treatment in low-income and middle-income countries since 2000. As the global community looks ahead to a universal antiretroviral regimen, this article considers the industry's role in supporting universal access to affordable, simpler, more durable, and tolerable HIV treatment regimens. Generic manufacturers made treatment scale-up in low-income and middle-income countries possible through reducing prices, combining molecules from different originator companies to develop optimal fixed-dose combinations, and investing in production capacity to meet escalating demand. Achieving scale-up of a universal regimen will require continued partnership in these areas. Collaboration on the demand and supply sides of the ARV marketplace will be required to foster a healthy and sustainable marketplace for new regimens. This includes clear priority setting from the global treatment community on priority products; predictable demand; regulatory prioritization of optimal products; effective tendering and procurement practices that enable multiple suppliers to participate in the market; coordinated product introduction efforts between Ministries of Health, partners, and civil society; and transparency from both buyers and suppliers to promote and monitor supply security. New regimens will benefit people living with HIV, as well as buyers and generic suppliers, by maximizing existing production capacity and treatment budgets to reach the 90-90-90 goals.

Tobacco industry issues management organizations: creating a global corporate network to undermine public health.

PubMed

McDaniel, Patricia A; Intinarelli, Gina; Malone, Ruth E

2008-01-17

The global tobacco epidemic claims 5 million lives each year, facilitated by the ability of transnational tobacco companies to delay or thwart meaningful tobacco control worldwide. A series of cross-company tobacco industry "issues management organizations" has played an important role in coordinating and implementing common strategies to defeat tobacco control efforts at international, national, and regional levels. This study examines the development and enumerates the activities of these organizations and explores the implications of continuing industry cooperation for global public health. Using a snowball sampling strategy, we collected documentary data from tobacco industry documents archives and assembled them into a chronologically organized case study. The International Committee on Smoking Issues (ICOSI) was formed in 1977 by seven tobacco company chief executives to create common anti-tobacco control strategies and build a global network of regional and national manufacturing associations. The organization's name subsequently changed to INFOTAB. The multinational companies built the organization rapidly: by 1984, it had 69 members operating in 57 countries. INFOTAB material, including position papers and "action kits" helped members challenge local tobacco control measures and maintain tobacco-friendly environments. In 1992 INFOTAB was replaced by two smaller organizations. The Tobacco Documentation Centre, which continues to operate, distributes smoking-related information and industry argumentation to members, some produced by cross-company committees. Agro-Tobacco Services, and now Hallmark Marketing Services, assists the INFOTAB-backed and industry supported International Tobacco Growers Association in advancing claims regarding the economic importance of tobacco in developing nations. The massive scale and scope of this industry effort illustrate how corporate interests, when threatened by the globalization of public health, sidestep competitive concerns to coordinate their activities. The global network of national and regional manufacturing associations created and nurtured by INFOTAB remains active, particularly in relation to the recently negotiated global health treaty, the Framework Convention on Tobacco Control. Policymakers should be aware that although these associations claim to represent only national or regional interests, they are allied to and coordinated with a confederation of transnational tobacco companies seeking to protect profits by undermining public health.

Tobacco industry issues management organizations: Creating a global corporate network to undermine public health

PubMed Central

McDaniel, Patricia A; Intinarelli, Gina; Malone, Ruth E

2008-01-01

Background The global tobacco epidemic claims 5 million lives each year, facilitated by the ability of transnational tobacco companies to delay or thwart meaningful tobacco control worldwide. A series of cross-company tobacco industry "issues management organizations" has played an important role in coordinating and implementing common strategies to defeat tobacco control efforts at international, national, and regional levels. This study examines the development and enumerates the activities of these organizations and explores the implications of continuing industry cooperation for global public health. Methods Using a snowball sampling strategy, we collected documentary data from tobacco industry documents archives and assembled them into a chronologically organized case study. Results The International Committee on Smoking Issues (ICOSI) was formed in 1977 by seven tobacco company chief executives to create common anti-tobacco control strategies and build a global network of regional and national manufacturing associations. The organization's name subsequently changed to INFOTAB. The multinational companies built the organization rapidly: by 1984, it had 69 members operating in 57 countries. INFOTAB material, including position papers and "action kits" helped members challenge local tobacco control measures and maintain tobacco-friendly environments. In 1992 INFOTAB was replaced by two smaller organizations. The Tobacco Documentation Centre, which continues to operate, distributes smoking-related information and industry argumentation to members, some produced by cross-company committees. Agro-Tobacco Services, and now Hallmark Marketing Services, assists the INFOTAB-backed and industry supported International Tobacco Growers Association in advancing claims regarding the economic importance of tobacco in developing nations. Conclusion The massive scale and scope of this industry effort illustrate how corporate interests, when threatened by the globalization of public health, sidestep competitive concerns to coordinate their activities. The global network of national and regional manufacturing associations created and nurtured by INFOTAB remains active, particularly in relation to the recently negotiated global health treaty, the Framework Convention on Tobacco Control. Policymakers should be aware that although these associations claim to represent only national or regional interests, they are allied to and coordinated with a confederation of transnational tobacco companies seeking to protect profits by undermining public health. PMID:18201375

Synthesis of oligonucleotides on a soluble support

PubMed Central

2017-01-01

Oligonucleotides are usually prepared in lab scale on a solid support with the aid of a fully automated synthesizer. Scaling up of the equipment has allowed industrial synthesis up to kilogram scale. In spite of this, solution-phase synthesis has received continuous interest, on one hand as a technique that could enable synthesis of even larger amounts and, on the other hand, as a gram scale laboratory synthesis without any special equipment. The synthesis on a soluble support has been regarded as an approach that could combine the advantageous features of both the solution and solid-phase syntheses. The critical step of this approach is the separation of the support-anchored oligonucleotide chain from the monomeric building block and other small molecular reagents and byproducts after each coupling, oxidation and deprotection step. The techniques applied so far include precipitation, extraction, chromatography and nanofiltration. As regards coupling, all conventional chemistries, viz. phosphoramidite, H-phosphonate and phosphotriester strategies, have been attempted. While P(III)-based phosphoramidite and H-phosphonate chemistries are almost exclusively used on a solid support, the “outdated” P(V)-based phosphotriester chemistry still offers one major advantage for the synthesis on a soluble support; the omission of the oxidation step simplifies the coupling cycle. Several of protocols developed for the soluble-supported synthesis allow the preparation of both DNA and RNA oligomers of limited length in gram scale without any special equipment, being evidently of interest for research groups that need oligonucleotides in large amounts for research purposes. However, none of them has really tested at such a scale that the feasibility of their industrial use could be critically judged. PMID:28781703

Smuggling as the “key to a combined market”: British American Tobacco in Lebanon

PubMed Central

Nakkash, R; Lee, K

2008-01-01

Objectives: To understand the strategy of British American Tobacco (BAT) and other transnational tobacco companies (TTCs) to gain access to the Lebanese market, which has remained relatively closed under monopoly ownership and political instability. Methods: Analysis of internal industry documents, local language secondary sources and industry publications. Results: TTCs have relied on legal and illegal channels to supply the Lebanese market since at least the 1970s. Available documents suggest smuggling has been an important component of BAT’s market entry strategy, transported in substantial quantities via middlemen for sale in Lebanon and neighbouring countries. TTCs took advantage of weak and unstable governance, resulting in uncertainty over the Regie’s legal status, and continued to supply the contraband trade despite appeals by the government to cease undermining its revenues. Since the end of the civil war in the early 1990s, continued uncertainty about the tobacco monopoly amid political instability has encouraged TTCs to seek a legal presence in the country, while continuing to achieve substantial sales through contraband. Conclusion: Evidence of the complicity of TTCs in cigarette smuggling extends to Lebanon and the Middle East where this trade has especially benefited from weak governance and chronic political instability. The regional nature of TTC strategy supports strong international cooperation under the Framework Convention on Tobacco Control to tackle the problem. PMID:18818226

Embryonic Stem Cells: Isolation, Characterization and Culture

NASA Astrophysics Data System (ADS)

Amit, Michal; Itskovitz-Eldor, Joseph

Embryonic stem cells are pluripotent cells isolated from the mammalian blastocyst. Traditionally, these cells have been derived and cultured with mouse embryonic fibroblast (MEF) supportive layers, which allow their continuous growth in an undifferentiated state. However, for any future industrial or clinical application hESCs should be cultured in reproducible, defined, and xeno-free culture system, where exposure to animal pathogens is prevented. From their derivation in 1998 the methods for culturing hESCs were significantly improved. This chapter wills discuss hESC characterization and the basic methods for their derivation and maintenance.

USGS research on Atlantic coral reef ecosystems

USGS Publications Warehouse

Kuffner, Ilsa B.; Yates, Kimberly K.; Zawada, David G.; Richey, Julie N.; Kellogg, Christina A.; Toth, Lauren T.

2015-10-23

Coral reefs are massive, biomineralized structures that protect coastal communities by acting as barriers to hazards such as hurricanes and tsunamis. They provide sand for beaches through the natural process of erosion, support tourism and recreational industries, and provide essential habitat for fisheries. The continuing global degradation of coral reef ecosystems is well documented. There is a need for focused, coordinated science to understand the complex physical and biological processes and interactions that are impacting the condition of coral reefs and their ability to respond to a changing environment.

Status report on GELNG (gelled LNG)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rudnicki, M.; Hoffman, L.C.; Vander Wall, E.M.

1980-01-01

Over the past 2 years, Aerojet's research on characterizing the process, flow, and use properties of gelled LNG has covered (1) its safety-enhancement potential, (2) the economics and preliminary design of an industrial-scale gelation system, and (3) the design of a portable gelator for larger scale (40 m/sup 3/) spill tests. The technical results thus far continue to support the conclusion that GELNG would substantially reduce spill hazards. Operating parameters would not be significantly changed by gelation, and the cost impact on delivered LNG appears to be small (about 5%).

Microgravity

NASA Image and Video Library

2004-04-15

The Commercial Vapor Diffusion Apparatus will be used to perform 128 individual crystal growth investigations for commercial and science research. These experiments will grow crystals of several different proteins, including HIV-1 Protease Inhibitor, Glycogen Phosphorylase A, and NAD Synthetase. The Commercial Vapor Diffusion Apparatus supports multiple commercial investigations within a controlled environment. The goal of the Commercial Protein Crystal Growth payload on STS-95 is to grow large, high-quality crystals of several different proteins of interest to industry, and to continue to refine the technology and procedures used in microgravity for this important commercial research.

The best of both worlds: a consideration of gender in team building.

PubMed

Rudan, Vincent T

2003-03-01

As teams continue to supplant individuals as the fundamental work unit, healthcare organizations increasingly are turning to high-performance care and service groups as keys to success. In this article, the author presents research and findings of an ethnographic case study of a mixed-gender work team of healthcare administrators. Focusing on gender issues and their impact on outcomes, the study offers insights for promoting cultural change and improving nursing practice systems that will influence health policy and support a new architecture for the healthcare industry.

JV Task 120 - Coal Ash Resources Research Consortium Research

DOE Office of Scientific and Technical Information (OSTI.GOV)

Debra Pflughoeft-Hassett; Loreal Heebink; David Hassett

2009-03-28

The Coal Ash Resources Research Consortium{reg_sign} (CARRC{reg_sign}, pronounced 'cars') is the core coal combustion product (CCP) research group at the Energy & Environmental Research Center (EERC). CARRC focuses on performing fundamental and applied scientific and engineering research emphasizing the environmentally safe, economical use of CCPs. CARRC member organizations, which include utilities and marketers, are key to developing industry-driven research in the area of CCP utilization and ensuring its successful application. The U.S. Department of Energy is a partner in CARRC through the EERC Jointly Sponsored Research Program, which provides matching funds for industrial member contributions and facilitates an increased levelmore » of effort in CARRC. CARRC tasks were designed to provide information on CCP performance, including environmental performance, engineering performance, favorable economics, and improved life cycle of products and projects. CARRC technical research tasks are developed based on member input and prioritization. CARRC special projects are developed with members and nonmembers to provide similar information and to support activities, including the assembly and interpretation of data, support for standards development and technology transfer, and facilitating product development and testing. CARRC activities from 2007 to 2009 included a range of research tasks, with primary work performed in laboratory tasks developed to answer specific questions or evaluate important fundamental properties of CCPs. The tasks were included in four categories: (1) Environmental Evaluations of CCPs; (2) Evaluation of Impacts on CCPs from Emission Controls; (3) Construction and Product-Related Activities; and (4) Technology Transfer and Maintenance Tasks. All tasks are designed to work toward achieving the CARRC overall goal and supporting objectives. The various tasks are coordinated in order to provide broad and useful technical data for CARRC members. Special projects provide an opportunity for non-CARRC members to sponsor specific research or technology transfer consistent with CARRC goals. This report covers CARRC activities from January 2007 through March 2009. These activities have been reported in CARRC Annual Reports and in member meetings over the past 2 years. CARRC continues to work with industry and various government agencies with its research, development, demonstration, and promotional activities nearing completion at the time of submission of this report. CARRC expects to continue its service to the coal ash industry in 2009 and beyond to work toward the common goal of advancing coal ash utilization by solving CCP-related technical issues and promoting the environmentally safe, technically sound, and economically viable management of these complex and changing materials.« less

7 CFR 1980.411 - Loan purposes.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, RURAL BUSINESS-COOPERATIVE... REGULATIONS (CONTINUED) GENERAL Business and Industrial Loan Program § 1980.411 Loan purposes. Loans to... improving, developing or financing business, industry and employment and improving the economic and...

Canadian advanced life support capacities and future directions

NASA Astrophysics Data System (ADS)

Bamsey, M.; Graham, T.; Stasiak, M.; Berinstain, A.; Scott, A.; Vuk, T. Rondeau; Dixon, M.

2009-07-01

Canada began research on space-relevant biological life support systems in the early 1990s. Since that time Canadian capabilities have grown tremendously, placing Canada among the emerging leaders in biological life support systems. The rapid growth of Canadian expertise has been the result of several factors including a large and technically sophisticated greenhouse sector which successfully operates under challenging climatic conditions, well planned technology transfer strategies between the academic and industrial sectors, and a strong emphasis on international research collaborations. Recent activities such as Canada's contribution of the Higher Plant Compartment of the European Space Agency's MELiSSA Pilot Plant and the remote operation of the Arthur Clarke Mars Greenhouse in the Canadian High Arctic continue to demonstrate Canadian capabilities with direct applicability to advanced life support systems. There is also a significant latent potential within Canadian institutions and organizations with respect to directly applicable advanced life support technologies. These directly applicable research interests include such areas as horticultural management strategies (for candidate crops), growth media, food processing, water management, atmosphere management, energy management, waste management, imaging, environment sensors, thermal control, lighting systems, robotics, command and data handling, communications systems, structures, in-situ resource utilization, space analogues and mission operations. With this background and in collaboration with the Canadian aerospace industry sector, a roadmap for future life support contributions is presented here. This roadmap targets an objective of at least 50% food closure by 2050 (providing greater closure in oxygen, water recycling and carbon dioxide uptake). The Canadian advanced life support community has chosen to focus on lunar surface infrastructure and not low Earth orbit or transit systems (i.e. microgravity applications). To advance the technical readiness for the proposed lunar missions, including a lunar plant growth lander, lunar "salad machine" (i.e. small scale plant production unit) and a full scale lunar plant production system, a suite of terrestrial developments and analogue systems are proposed. As has been successfully demonstrated by past Canadian advanced life support activities, terrestrial technology transfer and the development of highly qualified personnel will serve as key outputs for Canadian advanced life support system research programs. This approach is designed to serve the Canadian greenhouse industry by developing compliance measures for mitigating environmental impact, reducing labour and energy costs as well as improving Canadian food security, safety and benefit northern/remote communities.

Resiliency scoring for business continuity plans.

PubMed

Olson, Anna; Anderson, Jamie

Through this paper readers will learn of a scoring methodology, referred to as resiliency scoring, which enables the evaluation of business continuity plans based upon analysis of their alignment with a predefined set of criteria that can be customised and are adaptable to the needs of any organisation. This patent pending tool has been successful in driving engagement and is a powerful resource to improve reporting capabilities, identify risks and gauge organisational resilience. The role of business continuity professionals is to aid their organisations in planning and preparedness activities aimed at mitigating the impacts of potential disruptions and ensuring critical business functions can continue in the event of unforeseen circumstances. This may seem like a daunting task for what can typically be a small team of individuals. For this reason, it is important to be able to leverage industry standards, documented best practices and effective tools to streamline and support your continuity programme. The resiliency scoring methodology developed and implemented at Target has proven to be a valuable tool in taking the organisation's continuity programme to the next level. This paper will detail how the tool was developed and provide guidance on how it can be customised to fit your organisation's unique needs.

Did the strong get stronger and the weak get weaker? Examining changes in hospital financial condition.

PubMed

Bazzoli, Gloria J; Lindrooth, Richard C; Clement, Jan P; Zhao, Mei; Chukmaitov, Askar

2006-01-01

In the late 1990s and early 2000s, many industry observers expressed the view that there was a growing dichotomy in the hospital industry in which financially weak hospitals were getting weaker and financially strong hospitals were getting stronger. Although existing analysis of cross-sectional financial data concur with this view, our analysis of 1993 to 2000 longitudinal data provides only partial support. We find that about one half of general acute care hospitals classified as financially strong in 1993-95 continued to be strong in 1998-00. More persistence was found for hospitals in weak financial position in 1993-95 with about 60 to 70 percent of them continuing to be weak in 1998-00. Persistently weak hospitals did experience deteriorating financial condition whereas persistently strong hospitals appeared at best to hold their ground financially. Although many Medicare payment policies appear well-targeted to hospitals that would otherwise have financial problems (for example, isolated rural institutions and teaching hospitals), policymakers may need to consider the development of temporary loan or grant programs to assist hospitals that experience transitory financial problems during difficult times.

Critical Issues in Radiation Protection Knowledge Management for Preserving Radiation Protection Research and Development Capabilities.

PubMed

Dewji, Shaheen Azim

2017-02-01

As a hub of domestic radiation protection capabilities, Oak Ridge National Laboratory's Center for Radiation Protection Knowledge has a mandate to develop and actuate a formal knowledge management (KM) effort. This KM approach exceeds recruitment and training efforts but focuses on formalized strategies for knowledge transfer from outgoing subject matter experts in radiation protection to incoming generations. It is envisioned that such an effort will provide one avenue for preserving domestic capabilities to support stakeholder needs in the federal government and the nuclear industry while continuing to lead and innovate in research and development on a global scale. However, in the absence of broader coordination within the United States, preservation of radiation protection knowledge continues to be in jeopardy in the absence of a dedicated KM effort.

Long-term care for the elderly. The future of nursing homes.

PubMed

Vladeck, B C

1989-02-01

Continuing growth in the number of impaired elderly persons necessitates a continued reliance on nursing homes to care for at least those who are most impaired or most lacking in other supports, despite dissatisfaction over the quality of nursing home services and anxiety about the costs. Nursing home care now costs more than $30 billion annually, half of which comes from governmental sources. The Medicaid program, in particular, is central to all aspects of the nursing home industry. Private long-term care insurance is unlikely to solve the problem of nursing home financing. Rationalizing public expenditures will hinge critically on greater clarity as to just what roles nursing homes are expected to fulfill in the system of care, especially how they are supposed to relate to other services provided to Medicare beneficiaries.

40 CFR Table 5 to Subpart Jj of... - List of VHAP of Potential Concern Identified by Industry

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 10 2011-07-01 2011-07-01 false List of VHAP of Potential Concern Identified by Industry 5 Table 5 to Subpart JJ of Part 63 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National...

40 CFR Table 5 to Subpart Jj of... - List of VHAP of Potential Concern Identified by Industry

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 11 2014-07-01 2014-07-01 false List of VHAP of Potential Concern Identified by Industry 5 Table 5 to Subpart JJ of Part 63 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National...

40 CFR Table 5 to Subpart Jj of... - List of VHAP of Potential Concern Identified by Industry

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 11 2012-07-01 2012-07-01 false List of VHAP of Potential Concern Identified by Industry 5 Table 5 to Subpart JJ of Part 63 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National...

40 CFR Table 5 to Subpart Jj of... - List of VHAP of Potential Concern Identified by Industry

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 11 2013-07-01 2013-07-01 false List of VHAP of Potential Concern Identified by Industry 5 Table 5 to Subpart JJ of Part 63 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National...

Using federal technology policy to strength the US microelectronics industry

NASA Astrophysics Data System (ADS)

Gover, J. E.; Gwyn, C. W.

1994-07-01

A review of US and Japanese experiences with using microelectronics consortia as a tool for strengthening their respective industries reveals major differences. Japan has established catch-up consortia with focused goals. These consortia have a finite life targeted from the beginning, and emphasis is on work that supports or leads to product and process-improvement-driven commercialization. Japan's government has played a key role in facilitating the development of consortia and has used consortia promote domestic competition. US consortia, on the other hand, have often emphasized long-range research with considerably less focus than those in Japan. The US consortia have searched for and often made revolutionary technology advancements. However, technology transfer to their members has been difficult. Only SEMATECH has assisted its members with continuous improvements, compressing product cycles, establishing relationships, and strengthening core competencies. The US government has not been a catalyst nor provided leadership in consortia creation and operation. We propose that in order to regain world leadership in areas where US companies lag foreign competition, the US should create industry-wide, horizontal-vertical, catch-up consortia or continue existing consortia in the six areas where the US lags behind Japan -- optoelectronics, displays, memories, materials, packaging, and manufacturing equipment. In addition, we recommend that consortia be established for special government microelectronics and microelectronics research integration and application. We advocate that these consortia be managed by an industry-led Microelectronics Alliance, whose establishment would be coordinated by the Department of Commerce. We further recommend that the Semiconductor Research Corporation, the National Science Foundation Engineering Research Centers, and relevant elements of other federal programs be integrated into this consortia complex.

Using federal technology policy to strength the US microelectronics industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gover, J.E.; Gwyn, C.W.

1994-07-01

A review of US and Japanese experiences with using microelectronics consortia as a tool for strengthening their respective industries reveals major differences. Japan has established catch-up consortia with focused goals. These consortia have a finite life targeted from the beginning, and emphasis is on work that supports or leads to product and process-improvement-driven commercialization. Japan`s government has played a key role in facilitating the development of consortia and has used consortia promote domestic competition. US consortia, on the other hand, have often emphasized long-range research with considerably less focus than those in Japan. The US consortia have searched for andmore » often made revolutionary technology advancements. However, technology transfer to their members has been difficult. Only SEMATECH has assisted its members with continuous improvements, compressing product cycles, establishing relationships, and strengthening core competencies. The US government has not been a catalyst nor provided leadership in consortia creation and operation. We propose that in order to regain world leadership in areas where US companies lag foreign competition, the US should create industry-wide, horizontal-vertical, catch-up consortia or continue existing consortia in the six areas where the US lags behind Japan -- optoelectronics, displays, memories, materials, packaging, and manufacturing equipment. In addition, we recommend that consortia be established for special government microelectronics and microelectronics research integration and application. We advocate that these consortia be managed by an industry-led Microelectronics Alliance, whose establishment would be coordinated by the Department of Commerce. We further recommend that the Semiconductor Research Corporation, the National Science Foundation Engineering Research Centers, and relevant elements of other federal programs be integrated into this consortia complex.« less

NASA total quality management 1989 accomplishments report

NASA Technical Reports Server (NTRS)

Tai, Betty P. (Editor); Stewart, Lynne M. (Editor)

1990-01-01

NASA and contractor employees achieved many notable improvements in 1989. The highlights of those improvements, described in this seventh annual Accomplishments Report, demonstrate that the people who support NASA's activities are getting more involved in quality and continuous improvement efforts. Their gains solidly support NASA's and this Nation's goal to remain a leader in space exploration and in world-wide market competition, and, when communicated to others through avenues such as this report, foster improvement efforts across government and industry. The principles in practice which led to these process refinements are important cultural elements to any organization's productivity and quality efforts. The categories in this report reflect NASA principles set forth in the 1980's and are more commonly known today as Total Quality Management (TQM): top management leadership and support; strategic planning; focus on the customer; employee training and recognition; employee empowerment and teamwork; measurement and analysis; and quality assurance.

Developing Entrepreneurial and Technology Commercialization Policies to Promote Cooperative Ventures Between NIH and Industry

NASA Astrophysics Data System (ADS)

Rossomando, Edward F.

2001-03-01

The NIH has had a great influence in guiding the biological research agenda for the last half of the 20th century. This may change if the increases in research funding from the private sector that occurred in the last ten years continue into the 21st century. Ten years ago, industry supplied 55% of the US R&D funds. In 2000, industry support of R&D had increased to 76%, with industry carrying out 70% of the nations applied and 91% of its development research. Given this shift, one of the biggest challenges that NIH may face in coming years is sharing control of America's research agenda with industry. For this to occur policies that encourage cooperative ventures with industry are needed. In a unique experiment, I was invited to the National Institute of Dental and Craniofacial Research (NIDCR), one of the 25 NIH Institutes and Centers, to develop programs and policies that would promote interactions with industry. This talk will introduce the strategy and programs developed to commercialize products and technologies from basic science discoveries and introducing an entrepreneurial atmosphere within the Institute. The results of this experiment will be discussed by comparing differences between discovery-driven and customer-driven innovation. One outcome of this experience is a greater appreciation of the obstacles to introducing disruptive technologies into the market place and of the paradigms that serve as barriers to commercialization. One recommendation is that the NIDCR consider a policy that allows for some participation by industry in setting the research and training agenda of the Institute, and that a mechanism for industry input be introduced into its administrative organization.

DOE/Industry Matching Grant Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

John C. Lee

2003-09-30

For the academic year 2001-2002, the Department of Nuclear Engineering and Radiological Sciences received $50,000 of industrial contributions, matched by a DOE grant of $35,000. We used the combined DOE/Industry Matching Grant of $85,000 toward (a) undergraduate merit scholarships and research support, (b) graduate student support, and (c) partial support of a research scientist.

National Heart, Lung, and Blood Institute and the translation of cardiovascular discoveries into therapeutic approaches.

PubMed

Galis, Zorina S; Black, Jodi B; Skarlatos, Sonia I

2013-04-26

The molecular causes of ≈4000 medical conditions have been described, yet only 5% have associated therapies. For decades, the average time for drug development through approval has taken 10 to 20 years. In recent years, the serious challenges that confront the private sector have made it difficult to capitalize on new opportunities presented by advances in genomics and cellular therapies. Current trends are disturbing. Pharmaceutical companies are reducing their investments in research, and biotechnology companies are struggling to obtain venture funds. To support early-stage translation of the discoveries in basic science, the National Institutes of Health and the National Heart, Lung, and Blood Institute have developed new approaches to facilitating the translation of basic discoveries into clinical applications and will continue to develop a variety of programs that create teams of academic investigators and industry partners. The goal of these programs is to maximize the public benefit of investment of taxpayer dollars in biomedical research and to lessen the risk required for industry partners to make substantial investments. This article highlights several examples of National Heart, Lung, and Blood Institute-initiated translational programs and National Institutes of Health translational resources designed to catalyze and enable the earliest stages of the biomedical product development process. The translation of latest discoveries into therapeutic approaches depends on continued federal funding to enhance the early stages of the product development process and to stimulate and catalyze partnerships between academia, industry, and other sources of capital.

Can We Build an Open-Science Model to Fund Young, Risky, Blue-Sky Research? First Insights into Funding Geoscientists Via Thinkable.Org

NASA Astrophysics Data System (ADS)

McNeil, B.

2014-12-01

Some of the biggest discoveries and advances in geoscience research have come from purely curiosity-driven, blue-sky research. Marine biologist Osamu Shimomura's discovery of Green-Fluorecent Protein (GFP) in the 1960s during his postdoc is just one example, which came about through his interest and pursuit of how certain jellyfish bioluminescence. His discovery would eventually revolutionise medicine, culminating in a Nobel Prize in Chemistry in 2008. Despite the known importance of "blue-sky" research that doesn't have immediate commercial or social applications, it continues to struggle for funding from both government and industry. Success rates for young scientists also continue to decline within the government competitive granting models due to the importance of track records, yet history tells us that young scientists tend to come up with science's greatest discoveries. The digital age however, gives us a new opportunity to create an alternative and sustainable funding model for young, risky, blue-sky science that tends not to be supported by governments and industry anymore. Here I will discuss how new digital platforms empower researchers and organisations to showcase their research using video, allowing wider community engagment and funding that can be used to directly support young, risky, blue-sky research that is so important to the future of science. I will then talk about recent experience with this model from some ocean researchers who used a new platform called thinkable.org to showcase and raise funding via the public.

Barriers to the increased utilization of coal combustion/desulfurization by-products by government and commercial sectors - Update 1998

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pflughoeft-Hassett, D.F.; Sondreal, E.A.; Steadman, E.N.

The following conclusions are drawn from the information presented in this report: (1) Joint efforts by industry and government focused on meeting RTC recommendations for reduction/removal of barriers have met with some success. The most notable of these are the changes in regulations related to CCB utilization by individual states. Regionally or nationally consistent state regulation of CCB utilization would further reduce regulatory barriers. (2) Technology changes will continue to be driven by the CAAA, and emission control technologies are expected to continue to impact the type and properties of CCBs generated. As a result, continued RD and D willmore » be needed to learn how to utilize new and changing CCBs in environmentally safe, technically sound, and economically advantageous ways. Clean coal technology CCBs offer a new challenge because of the high volumes expected to be generated and the different characteristics of these CCBs compared to those of conventional CCBs. (3) Industry and government have developed the RD and D infrastructure to address the technical aspects of developing and testing new CCB utilization applications, but this work as well as constant quality control/quality assurance testing needs to be continued to address both industry wide issues and issues related to specific materials, regions, or users. (4) Concerns raised by environmental groups and the public will continue to provide environmental and technical challenges to the CCB industry. It is anticipated that the use of CCBs in mining applications, agriculture, structural fills, and other land applications will continue to be controversial and will require case-by-case technical and environmental information to be developed. The best use of this information will be in the development of generic regulations specifically addressing the use of CCBs in these different types of CCB applications. (5) The development of federal procurement guidelines under Executive Order 12873 titled ''Federal Acquisition, Recycling and Waste Prevention,'' in October 1993 was a positive step toward getting CCBs accepted in the marketplace. Industry needs to continue to work with EPA to develop additional procurement guidelines for products containing CCBs--and to take advantage of existing guidelines to encourage the use of CCBs in high-profile projects. (6) Accelerated progress toward increased utilization of CCBs can be made only if there is an increased financial commitment and technical effort by industry and government. The framework for this has been set by the successful cooperation of industry and government under DOE leadership. Cooperation should continue, with DOE fulfilling its lead role established in the RTC. It is clear that the RTC recommendations continue to have validity with respect to increasing CCB utilization and continue to provide guidance to industry and government agencies.« less

Advancements in Open Geospatial Standards for Photogrammetry and Remote Sensing from Ogc

NASA Astrophysics Data System (ADS)

Percivall, George; Simonis, Ingo

2016-06-01

The necessity of open standards for effective sharing and use of remote sensing continues to receive increasing emphasis in policies of agencies and projects around the world. Coordination on the development of open standards for geospatial information is a vital step to insure that the technical standards are ready to support the policy objectives. The mission of the Open Geospatial Consortium (OGC) is to advance development and use of international standards and supporting services that promote geospatial interoperability. To accomplish this mission, OGC serves as the global forum for the collaboration of geospatial data / solution providers and users. Photogrammetry and remote sensing are sources of the largest and most complex geospatial information. Some of the most mature OGC standards for remote sensing include the Sensor Web Enablement (SWE) standards, the Web Coverage Service (WCS) suite of standards, encodings such as NetCDF, GMLJP2 and GeoPackage, and the soon to be approved Discrete Global Grid Systems (DGGS) standard. In collaboration with ISPRS, OGC working with government, research and industrial organizations continue to advance the state of geospatial standards for full use of photogrammetry and remote sensing.

Industrial wastewater platform: upgrading of the biological process and operative configurations for best performance.

PubMed

Eusebi, Anna Laura; Massi, Alessandro; Sablone, Emiliano; Santinelli, Martina; Battistoni, Paolo

2012-01-01

The treatment of industrial liquid wastes is placed in a wide context of technologies and is related to the high variability of the influent physical-chemical characteristics. In this condition, the achievement of satisfactory biological unit efficiency could be complicated. An alternate process (AC) with aerobic and anoxic phases fed in a continuous way was evaluated as an operative solution to optimize the performance of the biological reactor in a platform for the treatment of industrial liquid wastes. The process application has determined a stable quality effluent with an average concentration of 25 mg TN L(-1), according to the law limits. The use of discharged wastewaters as rapid carbon sources to support the anoxic phase of the alternate cycle, realizes a reduction of TN of 95% without impact on the total operative costs. The evaluation of the micro-pollutants behaviour has highlighted a bio-adsorption phenomenon in the first reactor. The implementation of the process defined 31% of energy saving during period 1 and 19% for the periods 2, 3 and 4.

Development of a Renewable Hydrogen Production and Fuel Cell Education Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mann, Michael D.

2011-11-20

This report presents the results of a program designed to develop an education program to 1) Provide exposure to the basics of hydrogen-based technologies to a large number of students. This exposure will provide a level of training that will allow students to converse and work with other scientists and engineers in this field. It will also serve to spark a level of interest in a subset of students who will then continue with more advanced coursework and/or research; 2) Provide a “mid-level” training to a moderate level of students. More detailed and directed education will provide students with themore » ability to work to support industry and government development of hydrogen technologies. This level of training would be sufficient to work in the industry, but not be a leader in research and development; and 3) Provide detailed training to a smaller subset of students with a strong interest and propensity to make significant contributions to the technology development. These individuals will have extensive hands-on experience through internships that will play a major role in industry, government, and academia.« less

Food irradiation: Technology transfer to developing countries

NASA Astrophysics Data System (ADS)

Kunstadt, Peter

This paper discusses Nordion's experiences to-date with the Food Irradiation Project in Thailand (1987-1990). This project will enable the Government of Thailand and the Thai food industry to benefit from established Canadian technology in food irradiation. It includes the design and the construction in Thailand of a multipurpose irradiation facility, similar to the Canadian Irradiation Centre. In addition Canada provides the services, for extended periods of time, of construction and installation management and experts in facility operation, maintenance and training. The Technology Transfer component is a major part of the overall Thai Food Irradiation Project. Its purpose is to familiarize Thai government and industry personnel with Canadian requirements in food regulations and distribution and to conduct market and consumer tests of selected Thai irradiated food products in Canada, once the products have Canadian regulatory approval. On completion of this project, Thailand will have the necessary facility, equipment and training to continue to provide leadership in food irradiation research, as well as scientific and technical support to food industries not only in Thailand by also in the ASEAN region.

Sweat or no sweat: foreign workers in the garment industry in Malaysia.

PubMed

Crinis, Vicki

2010-01-01

In the last decade factory owners, in response to brand-name Corporate Social Responsibility (CSR) parameters, have joined associations that verify (through a monitoring and audit system) that management does not exploit labour. There have been no reports of violations of codes of conduct concerning Malaysian workers but for foreign workers on contract there are certain areas that have been reported. These areas, including trade union membership, the withholding of workers' passports and unsuitable accommodation, generally escape notice because auditors who monitor factory compliance do not question the terms of contracts as long as they comply with national labour standards. This paper is based on research with foreign workers in Malaysia and argues that despite the success of the anti-sweatshop movement in a global context, the neo-liberal state in Malaysia continues to place certain restrictions on transnational labour migrants which breach garment industry codes of conduct. Available evidence does not support the assumption that CSR practices provide sufficient protection for both citizen and foreign workers on contract in the garment industry.

Favored use of anti-predator netting (APN) applied for the farming of clams leads to little benefits to industry while increasing nearshore impacts and plastics pollution.

PubMed

Bendell, L I

2015-02-15

An overview of the efficacy of anti-predator netting (APN) used by the shellfish industry is presented. There is little support that the currently favored APN effectively protects farmed clams from predators. Evidence does suggest that APN leads to impacts and pollution. APN is an attractant for predators, e.g., crabs, by providing a refuge within Ulva sp. which attaches onto the surface of APN. APN entrains silt and organic matter and increases sediment temperatures degrading habitat underneath the APN. APN present hazards to fish and wildlife and is a source of plastics to the marine environment. The continued use of ineffective APN does not serve either the environment or industry well, and many of these issues could be addressed through the alternate use of "ancient" technology used by aboriginal people to maintain clam gardens; building of rock walls optimizing the amount of clam habitat thereby increasing numbers without the use of APN. Copyright © 2015 Elsevier Ltd. All rights reserved.

Research on industrial 10kW CO2 laser achieves major breakthrough

NASA Astrophysics Data System (ADS)

1991-01-01

The industrial 10kW CO2 laser is one of the items which the industrially developed nations are competing to develop. This laser is capable of continuous output power of over 10kW and can operate continuously for more than 6 hours. The 10kW CO2 laser developed as a key task of China's 7th Five-Year Plan and all its technological targets such as output power, electrooptical conversion efficiency and primary charging continuous operating time, have reached the level of world advancement, allowing China to enter the ranks of international advancement in the area of laser technology. The industrial 10kW CO2 laser can have wide application in such areas of industry as heat treating, machining, welding and surface treatment in industries such as steel, automobiles, ship building and aircraft manufacturing. For instance, using the high-efficiency laser beams of this 10kW laser to treat rollers, fan blades and automotive cylinder blocks can increase the life of these parts and produce large economic benefits. At present, industrial tests of gear welding is already being done on this 10kW laser.

For-Profit Entities and Continuing Education: A Nursing Perspective.

ERIC Educational Resources Information Center

Harper, Jane

1994-01-01

Is it ethical to allow biomedical industries to fund nursing continuing education? The history of for-profit entities' relationship to organized medicine shows that nursing should make its voice heard in boardrooms and preserve its patient advocacy role when cooperating with industry. (SK)

29 CFR 1915.120 - Powered industrial truck operator training.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Powered industrial truck operator training. 1915.120 Section 1915.120 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT...

29 CFR 1917.93 - Head protection.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED..., “American National Standard for Industrial Head Protection,” incorporated by reference in § 1917.3; (ii) American National Standards Institute (ANSI) Z89.1-2003, “American National Standard for Industrial Head...

29 CFR 1915.120 - Powered industrial truck operator training.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 7 2012-07-01 2012-07-01 false Powered industrial truck operator training. 1915.120 Section 1915.120 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT...

29 CFR 1917.93 - Head protection.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED..., “American National Standard for Industrial Head Protection,” incorporated by reference in § 1917.3; (ii) American National Standards Institute (ANSI) Z89.1-2003, “American National Standard for Industrial Head...

29 CFR 1915.120 - Powered industrial truck operator training.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 7 2013-07-01 2013-07-01 false Powered industrial truck operator training. 1915.120 Section 1915.120 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT...

29 CFR 1915.120 - Powered industrial truck operator training.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 7 2014-07-01 2014-07-01 false Powered industrial truck operator training. 1915.120 Section 1915.120 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT...

29 CFR 1915.120 - Powered industrial truck operator training.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 7 2011-07-01 2011-07-01 false Powered industrial truck operator training. 1915.120 Section 1915.120 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT...

New frontier, new power: the retail environment in Australia's dark market.

PubMed

Carter, S M

2003-12-01

To investigate the role of the retail environment in cigarette marketing in Australia, one of the "darkest" markets in the world. Analysis of 172 tobacco industry documents; and articles and advertisements found by hand searching Australia's three leading retail trade journals. As Australian cigarette marketing was increasingly restricted, the retail environment became the primary communication vehicle for building cigarette brands. When retail marketing was restricted, the industry conceded only incrementally and under duress, and at times continues to break the law. The tobacco industry targets retailers via trade promotional expenditure, financial and practical assistance with point of sale marketing, alliance building, brand advertising, and distribution. Cigarette brand advertising in retail magazines are designed to build brand identities. Philip Morris and British American Tobacco are now competing to control distribution of all products to retailers, placing themselves at the heart of retail business. Cigarette companies prize retail marketing in Australia's dark market. Stringent point of sale marketing restrictions should be included in any comprehensive tobacco control measures. Relationships between retailers and the industry will be more difficult to regulate. Retail press advertising and trade promotional expenditure could be banned. In-store marketing assistance, retail-tobacco industry alliance building, and new electronic retail distribution systems may be less amenable to regulation. Alliances between the health and retail sectors and financial support for a move away from retail dependence on tobacco may be necessary to effect cultural change.

Wind Power Today and Tomorrow

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Wind Power Today and Tomorrow is an annual publication that provides an overview of the wind research conducted under the U.S. Department of Energy's Wind and Hydropower Technologies Program. The purpose of Wind Power Today and Tomorrow is to show how DOE supports wind turbine research and deployment in hopes of furthering the advancement of wind technologies that produce clean, low-cost, reliable energy. Content objectives include: educate readers about the advantages and potential for widespread deployment of wind energy; explain the program's objectives and goals; describe the program's accomplishments in research and application; examine the barriers to widespread deployment; describemore » the benefits of continued research and development; facilitate technology transfer; and attract cooperative wind energy projects with industry. This 2003 edition of the program overview also includes discussions about wind industry growth in 2003, how DOE is taking advantage of low wind speed region s through advancing technology, and distributed applications for small wind turbines.« less

The National Geothermal Energy Research Program

NASA Technical Reports Server (NTRS)

Green, R. J.

1974-01-01

The continuous demand for energy and the concern for shortages of conventional energy resources have spurred the nation to consider alternate energy resources, such as geothermal. Although significant growth in the one natural steam field located in the United States has occurred, a major effort is now needed if geothermal energy, in its several forms, is to contribute to the nation's energy supplies. From the early informal efforts of an Interagency Panel for Geothermal Energy Research, a 5-year Federal program has evolved whose objective is the rapid development of a commercial industry for the utilization of geothermal resources for electric power production and other products. The Federal program seeks to evaluate the realistic potential of geothermal energy, to support the necessary research and technology needed to demonstrate the economic and environmental feasibility of the several types of geothermal resources, and to address the legal and institutional problems concerned in the stimulation and regulation of this new industry.

CHALLENGES AND STRATEGIES ON FIBROUS FEEDSTUFFS DENSIFICATION AND ITS INTERACTION WITH LIQUID INGREDIENTS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pordesimo, Lester O.; Tumuluru, Jaya Shankar

2015-10-01

There has been continuing interest and support in using herbaceous biomass, mostly agricultural crop residues, in the U.S. as feedstocks for producing bioenergy, liquid transportation fuels, and industrial chemicals/materials. With the potential of greater collection of agricultural crop residues for the foregoing industrial applications there will be a commensurate greater availability of crop residues for utilization in agricultural production. Agricultural crop residues are typically used in agricultural production as roughage or bedding for cattle. Use of herbaceous biomass, corn stover of greatest interest at the present time, and processing coproducts thereof, as a feed ingredient presents an opportunity to reducemore » ration costs and improve livestock enterprise profitability by replacing an amount of corn and other feed grains in livestock diets with proper formulation. The obvious advantage of utilizing corn stover is its wide availability and low cost.« less

R and D program for French sodium fast reactor: On the description and detection of sodium boiling phenomena during sub-assembly blockages

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vanderhaegen, M.; Laboratory of Waves and Acoustic, Institut Langevin, ESPCI ParisTech, 10 rue Vauquelin, 75005 Paris; Paumel, K.

2011-07-01

In support of the French ASTRID (Advanced Sodium Technological Reactor for Industrial Demonstration) reactor program, which aims to demonstrate the industrial applicability of sodium fast reactors with an increased level of safety demonstration and availability compared to the past French sodium fast reactors, emphasis is placed on reactor instrumentation. It is in this framework that CEA studies continuous core monitoring to detect as early as possible the onset of sodium boiling. Such a detection system is of particular interest due to the rapid progress and the consequences of a Total Instantaneous Blockage (TIB) at a subassembly inlet, where sodium boilingmore » intervenes in an early phase. In this paper, the authors describe all the particularities which intervene during the different boiling stages and explore possibilities for their detection. (authors)« less

Advanced Communications Technology Satellite Now Operating in an Inclined Orbit

NASA Technical Reports Server (NTRS)

Bauer, Robert A.

1999-01-01

The Advanced Communications Technology Satellite (ACTS) system has been modified to support operation in an inclined orbit that is virtually transparent to users, and plans are to continue this final phase of its operation through September 2000. The next 2 years of ACTS will provide a new opportunity for using the technologies that this system brought online over 5 years ago and that are still being used to resolve the technical issues that face NASA and the satellite industry in the area of seamless networking and interoperability with terrestrial systems. New goals for ACTS have been defined that align the program with recent changes in NASA and industry. ACTS will be used as a testbed to: Show how NASA and other Government agencies can use commercial systems for 1. future support of their operations Test, characterize, and resolve technical issues in using advanced communications 2. protocols such as asynchronous transfer mode (ATM) and transmission control protocol/Internet protocol (TCP/IP) over long latency links as found when interoperating satellites with terrestrial systems Evaluate narrow-spot-beam Ka-band satellite operation in an inclined orbit 3. Verify Ka-band satellite technologies since no other Ka-band system is yet 4. available in the United States

RFID Continuance Usage Intention in Health Care Industry.

PubMed

Iranmanesh, Mohammad; Zailani, Suhaiza; Nikbin, Davoud

Radio-frequency identification (RFID) has been proved to be an effective tool both for improving operational efficiency and for gaining competitive advantage in the health care industry despite its relatively low-usage rate in hospitals. The sustained use of RFID by health care professionals will promote its development in the long term. This study evaluates the acceptance continuance of RFID among health care professionals through technology continuance theory (TCT). Data were collected from 178 medical professionals in Malaysia and were then analyzed using the partial least squares technique. The analysis showed that the TCT model provided not only a thorough understanding of the continuance behavior of health care professionals toward RFID but also the attitudes, satisfaction, and perceived usefulness of professionals toward it. The results of this study are expected to assist policy makers and managers in the health care industry in implementing the RFID technology in hospitals by understanding the determinants of continuance of RFID usage intention.

A literature review on integrated perinatal care

PubMed Central

Rodríguez, Charo; des Rivières-Pigeon, Catherine

2007-01-01

Context The perinatal period is one during which health care services are in high demand. Like other health care sub-sectors, perinatal health care delivery has undergone significant changes in recent years, such as the integrative wave that has swept through the health care industry since the early 1990s. Purpose The present study aims at reviewing scholarly work on integrated perinatal care to provide support for policy decision-making. Results Researchers interested in integrated perinatal care have, by assessing the effectiveness of individual clinical practices and intervention programs, mainly addressed issues of continuity of care and clinical and professional integration. Conclusions Improvements in perinatal health care delivery appear related not to structurally integrated health care delivery systems, but to organizing modalities that aim to support woman-centred care and cooperative clinical practice. PMID:17786177

Lessons Learned (3 Years of H2O2 Propulsion System Testing Efforts at NASA's John C. Stennis Space Center)

NASA Technical Reports Server (NTRS)

Taylor, Gary O.

2001-01-01

John C. Stennis Space Center continues to support the Propulsion community in an effort to validate High-Test Peroxide as an alternative to existing/future oxidizers. This continued volume of peroxide test/handling activity at Stennis Space Center (SSC) provides numerous opportunities for the SSC team to build upon previously documented 'lessons learned'. SSC shall continue to strive to document their experience and findings as H2O2 issues surface. This paper is intended to capture all significant peroxide issues that we have learned over the last three years. This data (lessons learned) has been formulated from practical handling, usage, storage, operations, and initial development/design of our systems/facility viewpoint. The paper is intended to be an information type tool and limited in technical rational; therefore, presenting the peroxide community with some issues to think about as the continued interest in peroxide evolves and more facilities/hardware are built. These lessons learned are intended to assist industry in mitigating problems and identifying potential pitfalls when dealing with the requirements for handling high-test peroxide.

Proposal for an Evaluation Method for the Performance of Work Procedures.

PubMed

Mohammed, Mouda; Mébarek, Djebabra; Wafa, Boulagouas; Makhlouf, Chati

2016-12-01

Noncompliance of operators with work procedures is a recurrent problem. This human behavior has been said to be situational and studied by many different approaches (ergonomic and others), which consider the noncompliance with work procedures to be obvious and seek to analyze its causes as well as consequences. The object of the proposed method is to solve this problem by focusing on the performance of work procedures and ensuring improved performance on a continuous basis. This study has multiple results: (1) assessment of the work procedures' performance by a multicriteria approach; (2) the use of a continuous improvement approach as a framework for the sustainability of the assessment method of work procedures' performance; and (3) adaptation of the Stop-Card as a facilitator support for continuous improvement of work procedures. The proposed method emphasizes to put in value the inputs of continuous improvement of the work procedures in relation with the conventional approaches which adopt the obvious evidence of the noncompliance to the working procedures and seek to analyze the cause-effect relationships related to this unacceptable phenomenon, especially in strategic industry.

Sparseness- and continuity-constrained seismic imaging

NASA Astrophysics Data System (ADS)

Herrmann, Felix J.

2005-04-01

Non-linear solution strategies to the least-squares seismic inverse-scattering problem with sparseness and continuity constraints are proposed. Our approach is designed to (i) deal with substantial amounts of additive noise (SNR < 0 dB); (ii) use the sparseness and locality (both in position and angle) of directional basis functions (such as curvelets and contourlets) on the model: the reflectivity; and (iii) exploit the near invariance of these basis functions under the normal operator, i.e., the scattering-followed-by-imaging operator. Signal-to-noise ratio and the continuity along the imaged reflectors are significantly enhanced by formulating the solution of the seismic inverse problem in terms of an optimization problem. During the optimization, sparseness on the basis and continuity along the reflectors are imposed by jointly minimizing the l1- and anisotropic diffusion/total-variation norms on the coefficients and reflectivity, respectively. [Joint work with Peyman P. Moghaddam was carried out as part of the SINBAD project, with financial support secured through ITF (the Industry Technology Facilitator) from the following organizations: BG Group, BP, ExxonMobil, and SHELL. Additional funding came from the NSERC Discovery Grants 22R81254.

A membrane-integrated fermentation reactor system: its effects in reducing the amount of sub-raw materials for D-lactic acid continuous fermentation by Sporolactobacillus laevolacticus.

PubMed

Mimitsuka, Takashi; Na, Kyungsu; Morita, Ken; Sawai, Hideki; Minegishi, Shinichi; Henmi, Masahiro; Yamada, Katsushige; Shimizu, Sakayu; Yonehara, Tetsu

2012-01-01

Continuous fermentation by retaining cells with a membrane-integrated fermentation reactor (MFR) system was found to reduce the amount of supplied sub-raw material. If the amount of sub-raw material can be reduced, continuous fermentation with the MFR system should become a more attractive process for industrialization, due to decreased material costs and loads during the refinement process. Our findings indicate that the production rate decreased when the amount of the sub-raw material was reduced in batch fermentation, but did not decrease during continuous fermentation with Sporolactobacillus laevolacticus. Moreover, continuous fermentation with a reduced amount of sub-raw material resulted in a productivity of 11.2 g/L/h over 800 h. In addition, the index of industrial process applicability used in the MFR system increased by 6.3-fold as compared with the conventional membrane-based fermentation reactor previously reported, suggesting a potential for the industrialization of this D-lactic acid continuous fermentation process.

Case history of magnetic bearing supported hot gas turboexpander

DOE Office of Scientific and Technical Information (OSTI.GOV)

Destombes, Y.; Allaire, P.E.

1995-12-31

A very significant advantage for the use of magnetic bearings in hot gas and cryogenic expanders is that the bearing operating temperature can be much higher or lower than for conventional oil lubricated fluid film or rolling element bearings. This has lead to the increasing development of industrial expanders which are magnetic bearing supported and rather complex bearing oil supply sealing arrangements can be eliminated. As advances in magnetic bearing technology and understanding occur, the design and performance of the magnetic bearings continues to improve. The purpose of this paper is to describe some characteristics of industrial magnetic bearing supportedmore » turboexpanders, both hot gas and cryogenic, and present a particular hot gas expander application. This paper discusses the basic principles of operation of the magnetic bearings including the bearing radial and thrust bearings, sensors, control system, and dynamic characteristics. The governing equations are given for upper quadrant radial bearing designs. Design equations relevant to bearing design will be presented to assist potential users of magnetic bearings in understanding their operation. The paper also presents a practical application of magnetic bearings to a hot gas turbogenerator. The bearings support a turbine wheel which converts the exhaust gas energy of a blast furnace into electrical power through a synchronous 6 MW generator. The magnetic bearing allowed the rotor to be constructed as a single shaft machine. The turbine wheel is directly connected to the generator rotor. The unit has been successfully operated for a 8 year period and now has in excess of 70,000 hours in a steel plant in Europe. It has some unique features: (1) it is the heaviest magnetic bearing supported rotor in industrial operation at 8 tons, (2) it has very high unbalance acceptance, (3) it has a special rotor mounted auxiliary bearing design, and (4) only the upper quadrant of the bearing is employed in the unit.« less

Superficial bladder cancer.

PubMed Central

Hall, R. R.

1994-01-01

Bladder cancer is almost certainly a product of the industrial revolution and the cigarette smoking that has accompanied it. Exposure to a chemical bladder carcinogen such as beta naphthylamine, benzidine, or 4-diphenylaniline can be proved in only a small proportion of patients and only a handful obtain industrial diseases benefit after developing "Prescribed Industrial Disease C23." None the less, the continued use of known carcinogenic substances in British industry for many years after their identification, the wide range of industries with a known or suspected increased risk of bladder cancer, and our ignorance of the carcinogenic potential of many materials used in current manufacturing should be a cause for continuing concern. Images p912-a PMID:8173377

Conflicts of Interest at Medical Journals: The Influence of Industry-Supported Randomised Trials on Journal Impact Factors and Revenue – Cohort Study

PubMed Central

Lundh, Andreas; Barbateskovic, Marija; Hróbjartsson, Asbjørn; Gøtzsche, Peter C.

2010-01-01

Background Transparency in reporting of conflict of interest is an increasingly important aspect of publication in medical journals. Publication of large industry-supported trials may generate many citations and journal income through reprint sales and thereby be a source of conflicts of interest for journals. We investigated industry-supported trials' influence on journal impact factors and revenue. Methods and Findings We sampled six major medical journals (Annals of Internal Medicine, Archives of Internal Medicine, BMJ, JAMA, The Lancet, and New England Journal of Medicine [NEJM]). For each journal, we identified randomised trials published in 1996–1997 and 2005–2006 using PubMed, and categorized the type of financial support. Using Web of Science, we investigated citations of industry-supported trials and the influence on journal impact factors over a ten-year period. We contacted journal editors and retrieved tax information on income from industry sources. The proportion of trials with sole industry support varied between journals, from 7% in BMJ to 32% in NEJM in 2005–2006. Industry-supported trials were more frequently cited than trials with other types of support, and omitting them from the impact factor calculation decreased journal impact factors. The decrease varied considerably between journals, with 1% for BMJ to 15% for NEJM in 2007. For the two journals disclosing data, income from the sales of reprints contributed to 3% and 41% of the total income for BMJ and The Lancet in 2005–2006. Conclusions Publication of industry-supported trials was associated with an increase in journal impact factors. Sales of reprints may provide a substantial income. We suggest that journals disclose financial information in the same way that they require them from their authors, so that readers can assess the potential effect of different types of papers on journals' revenue and impact. Please see later in the article for the Editors' Summary PMID:21048986

Conflicts of interest at medical journals: the influence of industry-supported randomised trials on journal impact factors and revenue - cohort study.

PubMed

Lundh, Andreas; Barbateskovic, Marija; Hróbjartsson, Asbjørn; Gøtzsche, Peter C

2010-10-26

transparency in reporting of conflict of interest is an increasingly important aspect of publication in medical journals. Publication of large industry-supported trials may generate many citations and journal income through reprint sales and thereby be a source of conflicts of interest for journals. We investigated industry-supported trials' influence on journal impact factors and revenue. we sampled six major medical journals (Annals of Internal Medicine, Archives of Internal Medicine, BMJ, JAMA, The Lancet, and New England Journal of Medicine [NEJM]). For each journal, we identified randomised trials published in 1996-1997 and 2005-2006 using PubMed, and categorized the type of financial support. Using Web of Science, we investigated citations of industry-supported trials and the influence on journal impact factors over a ten-year period. We contacted journal editors and retrieved tax information on income from industry sources. The proportion of trials with sole industry support varied between journals, from 7% in BMJ to 32% in NEJM in 2005-2006. Industry-supported trials were more frequently cited than trials with other types of support, and omitting them from the impact factor calculation decreased journal impact factors. The decrease varied considerably between journals, with 1% for BMJ to 15% for NEJM in 2007. For the two journals disclosing data, income from the sales of reprints contributed to 3% and 41% of the total income for BMJ and The Lancet in 2005-2006. publication of industry-supported trials was associated with an increase in journal impact factors. Sales of reprints may provide a substantial income. We suggest that journals disclose financial information in the same way that they require them from their authors, so that readers can assess the potential effect of different types of papers on journals' revenue and impact.

29 CFR 1917.93 - Head protection.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED... of the following consensus standards: (i) ANSI Z89.1-2003, “American National Standard for Industrial... National Standard for Industrial Head Protection,” which is incorporated by reference in § 1917.3; or (iii...

29 CFR 1917.93 - Head protection.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED... of the following consensus standards: (i) ANSI Z89.1-2003, “American National Standard for Industrial... National Standard for Industrial Head Protection,” which is incorporated by reference in § 1917.3; or (iii...

40 CFR 98.411 - Reporting threshold.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 21 2014-07-01 2014-07-01 false Reporting threshold. 98.411 Section 98.411 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Suppliers of Industrial Greenhouse Gases § 98.411 Reporting threshold. Any supplier of industrial greenhouse gases...

40 CFR 98.411 - Reporting threshold.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 21 2011-07-01 2011-07-01 false Reporting threshold. 98.411 Section 98.411 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Suppliers of Industrial Greenhouse Gases § 98.411 Reporting threshold. Any supplier of industrial greenhouse gases...

40 CFR 98.411 - Reporting threshold.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 22 2013-07-01 2013-07-01 false Reporting threshold. 98.411 Section 98.411 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Suppliers of Industrial Greenhouse Gases § 98.411 Reporting threshold. Any supplier of industrial greenhouse gases...

View from industry.

PubMed

Guezuraga, Robert M; Steinbring, Denise Y

2004-12-01

The transformation of the cardiothoracic specialty requires a complete mind-set and skill-set change such that the specialty repositions itself in this era of complex cardiac disease, increased competition, technology innovation, financial constraints, rationed access to technology and increased scrutiny on clinical outcomes. The future offers a variety of surgical treatment options for patients suffering from disease states that have traditionally not been treated by cardiothoracic surgeons such as ablation for atrial fibrillation and cell therapy for heart failure. In addition, patient expectations for prolonged and quality-improved years are higher as they educate themselves on options that are less invasive. Failure to build a new repertoire of skills will mean diminished access to patients because referrals will be made to those cardiothoracic surgeons who are seen as innovators. Time is of the essence, as market dynamics are taking their toll. Cardiothoracic surgery today is still one of the most profitable specialties within the hospital and therefore, hospitals should be willing to support and differentiate their heart programs through new technology adoption. But cardiothoracic surgeons need to be open to explore new methods for treating cardiac disease and to work with industry in proving the efficacy and patient benefits of new procedures. At a higher level, pan-European approaches to new technology adoption need to focus on increased governmental spending on healthcare and on reimbursement strategies that make this possible. The medical device industry continues to invest heavily in new techniques and technologies and should be viewed as a strategic partner by individual surgeons as well as by the surgical societies. As industry continues to focus on areas such as research, product development, market development, professional and resident education, reimbursement, and patient access issues, it is imperative for surgeons to work collaboratively with industry to drive change for the cardiothoracic specialty and to maximize the resources that each offers to the other. Though not always understood, a common unity of purpose does exist and constructive methods to dealing with change can be developed together. Frost & Sullivan predicts a medical device industry compound annual growth rate of 8% in the next 12 years. Achieving that same level of growth specifically across cardiothoracic surgery would be tremendous.

Enhanced phenol degradation in coking wastewater by immobilized laccase on magnetic mesoporous silica nanoparticles in a magnetically stabilized fluidized bed.

PubMed

Wang, Feng; Hu, Yiru; Guo, Chen; Huang, Wei; Liu, Chun-Zhao

2012-04-01

The immobilized laccase on magnetic mesoporous silica nanoparticles has been developed for efficient phenol degradation. The degradation rate of phenol by the immobilized laccase was 2-fold higher than that of the free laccase, and the immobilized laccase retained 71.3% of its initial degradation ability after 10 successive batch treatments of coking wastewater. The phenol degradation in the coking wastewater was enhanced in a continuous treatment process by the immobilized laccase in a magnetically stabilized fluidized bed (MSFB) because of good mixing and mass transfer. The degradation rate of phenol maintained more than 99% at a flow rate of less than 450mLh(-1) and decreased slowly to 91.5% after 40h of the continuous operation in the MSFB. The present work indicated that the immobilized laccase on magnetic mesoporous supports together with the MSFB provided a promising avenue for the continuous enzymatic degradation of phenolic compounds in industrial wastewater. Copyright © 2012 Elsevier Ltd. All rights reserved.

Continuous modulations of femtosecond laser-induced periodic surface structures and scanned line-widths on silicon by polarization changes.

PubMed

Han, Weina; Jiang, Lan; Li, Xiaowei; Liu, Pengjun; Xu, Le; Lu, YongFeng

2013-07-01

Large-area, uniform laser-induced periodic surface structures (LIPSS) are of wide potential industry applications. The continuity and processing precision of LIPSS are mainly determined by the scanning intervals of adjacent scanning lines. Therefore, continuous modulations of LIPSS and scanned line-widths within one laser scanning pass are of great significance. This study proposes that by varying the laser (800 nm, 50 fs, 1 kHz) polarization direction, LIPSS and the scanned line-widths on a silicon (111) surface can be continuously modulated with high precision. It shows that the scanned line-width reaches the maximum when the polarization direction is perpendicular to the scanning direction. As an application example, the experiments show large-area, uniform LIPSS can be fabricated by controlling the scanning intervals based on the one-pass scanned line-widths. The simulation shows that the initially formed LIPSS structures induce directional surface plasmon polaritons (SPP) scattering along the laser polarization direction, which strengthens the subsequently anisotropic LIPSS fabrication. The simulation results are in good agreement with the experiments, which both support the conclusions of continuous modulations of the LIPSS and scanned line-widths.

Are industry financial ties associated with greater scholarly impact among academic otolaryngologists?

PubMed

Svider, Peter F; Bobian, Michael; Lin, Ho-Sheng; Setzen, Michael; Baredes, Soly; Eloy, Jean Anderson; Folbe, Adam J

2017-01-01

In response to concerns regarding physician-industry relationships, the Physician Sunshine Act of 2010 was passed in an effort to increase transparency and accountability. Our objective was to determine whether there is an association between industry support and scholarly impact among academic otolaryngologists. Faculty listings, academic rank, and fellowship training of academic otolaryngologists were accessed from departmental websites. H-indices, number of publications, and publication range (years) of each individual were calculated using the Scopus database. The Center for Medicare and Medicaid Services Open Payments database was used to determine industry payments during 2014 to each otolaryngologist. Of 1,515 otolaryngologists, 65.4% received industry support and 15.8% received support > $1,000. No difference in impact, as measured by the h-index, was noted upon comparison of those receiving support and those who did not (P > 0.05). Individuals receiving > $1,000 had higher h-indices and total publications than those receiving < $1,000 or receiving no support (H = 17.8 vs. 10.9, P < 0.0001), even upon controlling for academic seniority. Upon organization by subspecialty, individuals receiving > $1,000 had greater scholarly impact among most subspecialties. Industry contributions increased with advancing experience. Receiving industry contributions greater than $1,000 is associated with greater scholarly impact among academic otolaryngologists. In a smaller surgical specialty, such as otolaryngology-head and neck surgery, direct industry research support-as well as indirect contributions through the support of educational programs, consulting, and other expenses-potentially impacts scholarly discourse; these findings do not reflect a causal relationship and may require further characterization. NA Laryngoscope, 127:87-94, 2017. © 2016 The American Laryngological, Rhinological and Otological Society, Inc.

Analysis of Plastics Industries in the Major Industrial Countries

DOT National Transportation Integrated Search

1981-01-01

This report provides data needed to support an assessment of the relative position of the US plastics resins industry, on a worldwide basis, in terms of its being able to support automotive manufacturing operations. The use of plastics in US and fore...

Disease will limit future food supply from the global crustacean fishery and aquaculture sectors.

PubMed

Stentiford, G D; Neil, D M; Peeler, E J; Shields, J D; Small, H J; Flegel, T W; Vlak, J M; Jones, B; Morado, F; Moss, S; Lotz, J; Bartholomay, L; Behringer, D C; Hauton, C; Lightner, D V

2012-06-01

Seafood is a highly traded food commodity. Farmed and captured crustaceans contribute a significant proportion with annual production exceeding 10 M metric tonnes with first sale value of $40bn. The sector is dominated by farmed tropical marine shrimp, the fastest growing sector of the global aquaculture industry. It is significant in supporting rural livelihoods and alleviating poverty in producing nations within Asia and Latin America while forming an increasing contribution to aquatic food supply in more developed countries. Nations with marine borders often also support important marine fisheries for crustaceans that are regionally traded as live animals and commodity products. A general separation of net producing and net consuming nations for crustacean seafood has created a truly globalised food industry. Projections for increasing global demand for seafood in the face of level or declining fisheries requires continued expansion and intensification of aquaculture while ensuring best utilisation of captured stocks. Furthermore, continued pressure from consuming nations to ensure safe products for human consumption are being augmented by additional legislative requirements for animals (and their products) to be of low disease status. As a consequence, increasing emphasis is being placed on enforcement of regulations and better governance of the sector; currently this is a challenge in light of a fragmented industry and less stringent regulations associated with animal disease within producer nations. Current estimates predict that up to 40% of tropical shrimp production (>$3bn) is lost annually, mainly due to viral pathogens for which standard preventative measures (e.g. such as vaccination) are not feasible. In light of this problem, new approaches are urgently required to enhance yield by improving broodstock and larval sourcing, promoting best management practices by farmer outreach and supporting cutting-edge research that aims to harness the natural abilities of invertebrates to mitigate assault from pathogens (e.g. the use of RNA interference therapeutics). In terms of fisheries losses associated with disease, key issues are centred on mortality and quality degradation in the post-capture phase, largely due to poor grading and handling by fishers and the industry chain. Occurrence of disease in wild crustaceans is also widely reported, with some indications that climatic changes may be increasing susceptibility to important pathogens (e.g. the parasite Hematodinium). However, despite improvements in field and laboratory diagnostics, defining population-level effects of disease in these fisheries remains elusive. Coordination of disease specialists with fisheries scientists will be required to understand current and future impacts of existing and emergent diseases on wild stocks. Overall, the increasing demand for crustacean seafood in light of these issues signals a clear warning for the future sustainability of this global industry. The linking together of global experts in the culture, capture and trading of crustaceans with pathologists, epidemiologists, ecologists, therapeutics specialists and policy makers in the field of food security will allow these issues to be better identified and addressed. Copyright © 2012 Elsevier Inc. All rights reserved.

Assessing Continuing Education Needs in Small Geographically Dispersed Industries.

ERIC Educational Resources Information Center

Adams, W. Sam

In 1978, the National Science Foundation awarded the University of Wisconsin-Oshkosh $50,000 to determine the continuing education needs of technically-trained persons employed in small, geographically dispersed industries. Thirty companies which employed fewer than 500 people and which were likely to employ scientists, engineers, and technicians…

32 CFR 237a.1 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 2 2010-07-01 2010-07-01 false Purpose. 237a.1 Section 237a.1 National Defense Department of Defense (Continued) OFFICE OF THE SECRETARY OF DEFENSE (CONTINUED) MISCELLANEOUS PUBLIC AFFAIRS... with industry on (1) public affairs matters in general, (2) industry-sponsored events, and (3...

An Industry-Sponsored, School-Focused Model for Continuing Professional Development of Technology Teachers

ERIC Educational Resources Information Center

Engelbrecht, Werner; Ankiewicz, Piet; de Swardt, Estelle

2007-01-01

Traditionally a divide has existed between faculties of education at higher education institutions (HEIs) and trade and industry, but the business sector is increasingly buying into community development with corporate social investment, especially regarding technology education. We report on a continuing professional teacher development (CPTD)…

Analyzing the development of Indonesia shrimp industry

NASA Astrophysics Data System (ADS)

Wati, L. A.

2018-04-01

This research aimed to analyze the development of shrimp industry in Indonesia. Porter’s Diamond Theory was used for analysis. The Porter’s Diamond theory is one of framework for industry analysis and business strategy development. The Porter’s Diamond theory has five forces that determine the competitive intensity in an industry, namely (1) the threat of substitute products, (2) the threat of competition, (3) the threat of new entrants, (4) bargaining power of suppliers, and (5) bargaining power of consumers. The development of Indonesian shrimp industry pretty good, explained by Porter Diamond Theory analysis. Analysis of Porter Diamond Theory through four main components namely factor conditions; demand condition; related and supporting industries; and firm strategy, structure and rivalry coupled with a two-component supporting (regulatory the government and the factor of chance). Based on the result of this research show that two-component supporting (regulatory the government and the factor of chance) have positive. Related and supporting industries have negative, firm and structure strategy have negative, rivalry has positive, factor condition have positive (except science and technology resources).

Tobacco: coopting our public health.

PubMed

Basil, M D

1996-01-01

Communication is a tool that can be used to promote public health. The case of tobacco illustrates, however, that behavior change can only be advocated, not ensured. The tobacco industry has focused on individual- and societal-level actions that effectively sabotage antismoking campaigns. Health communication researchers should pay special attention to how politics is subverted, the principle of freedom of speech is abused, message framing encourages the continued marketing of cigarettes, and tobacco advertising swamps public health messages in both quantity and style. The field of health communication should do two things to help counter this campaign. First, we should make a concerted effort to refute the arguments offered by the tobacco companies. Second, we should continue to take action on four levels--as individuals, as responsible citizens, in support of organizations, and to create societal changes that will reduce the use of tobacco.

Commercialization and Industrial Development for the Fetal Hear Rate Monitor

NASA Technical Reports Server (NTRS)

Zahorian, Stephen

2000-01-01

The primary objectives for this task were to continue the development and testing of the NASA/ODU passive acoustic fetal heart rate monitor, with the goal of transferring the technology to the commercial sector. Areas of work included: 1. To assist in the development of a new hardware front end electronics box for the fetal heart rate monitor, so as to reduce the size of the electronics box, and also to provide for a "low-frequency" and "high-frequency" mode of operation. To make necessary changes in the operating software to support the two modes of operation. 2. To provide an option for a strip chart recording for the system, so that medical personnel could more easily make comparisons with ultra sound strip chart recordings. and 3. To help with continued testing of the system.

Critical issues in radiation protection knowledge management for preserving radiation protection research and development capabilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dewji, Shaheen Azim

As a hub of domestic radiation protection capabilities, Oak Ridge National Laboratory’s Center for Radiation Protection Knowledge has a mandate to develop and actuate a formal knowledge management (KM) effort. This KM approach exceeds recruitment and training efforts but focuses on formalized strategies for knowledge transfer from outgoing subject matter experts in radiation protection to incoming generations. It is envisioned that such an effort will provide one avenue for preserving domestic capabilities to support stakeholder needs in the federal government and the nuclear industry while continuing to lead and innovate in research and development on a global scale. Furthermore, inmore » the absence of broader coordination within the United States, preservation of radiation protection knowledge continues to be in jeopardy in the absence of a dedicated KM effort.« less

Critical issues in radiation protection knowledge management for preserving radiation protection research and development capabilities

DOE PAGES

Dewji, Shaheen Azim

2017-01-01

As a hub of domestic radiation protection capabilities, Oak Ridge National Laboratory’s Center for Radiation Protection Knowledge has a mandate to develop and actuate a formal knowledge management (KM) effort. This KM approach exceeds recruitment and training efforts but focuses on formalized strategies for knowledge transfer from outgoing subject matter experts in radiation protection to incoming generations. It is envisioned that such an effort will provide one avenue for preserving domestic capabilities to support stakeholder needs in the federal government and the nuclear industry while continuing to lead and innovate in research and development on a global scale. Furthermore, inmore » the absence of broader coordination within the United States, preservation of radiation protection knowledge continues to be in jeopardy in the absence of a dedicated KM effort.« less

The Commercial Vapor Diffusion Apparatus (CVDA) STS-95

NASA Technical Reports Server (NTRS)

2004-01-01

The Commercial Vapor Diffusion Apparatus will be used to perform 128 individual crystal growth investigations for commercial and science research. These experiments will grow crystals of several different proteins, including HIV-1 Protease Inhibitor, Glycogen Phosphorylase A, and NAD Synthetase. The Commercial Vapor Diffusion Apparatus supports multiple commercial investigations within a controlled environment. The goal of the Commercial Protein Crystal Growth payload on STS-95 is to grow large, high-quality crystals of several different proteins of interest to industry, and to continue to refine the technology and procedures used in microgravity for this important commercial research.

System engineering for image and video systems

NASA Astrophysics Data System (ADS)

Talbot, Raymond J., Jr.

1997-02-01

The National Law Enforcement and Corrections Technology Centers (NLECTC) support public law enforcement agencies with technology development, evaluation, planning, architecture, and implementation. The NLECTC Western Region has a particular emphasis on surveillance and imaging issues. Among its activities, working with government and industry, NLECTC-WR produces 'Guides to Best Practices and Acquisition Methodologies' that facilitate government organizations in making better informed purchasing and operational decisions. This presentation includes specific examples from current activities. Through these systematic procedures, it is possible to design solutions optimally matched to the desired outcomes and provide a process for continuous improvement and greater public awareness of success.

Biopharmaceutical Innovation System in China: System Evolution and Policy Transitions (Pre-1990s-2010s)

PubMed Central

Hu, Hao; Chung, Chao-Chen

2015-01-01

Background: This article sets up the initial discussion of the evolution of biopharmaceutical innovation in China through the perspective of sectoral innovation system (SIS). Methods: Two data sources including archival documentary data and field interviews were used in this study. Archival documentary data was collected from China Food and Drug Administration (CFDA) and Chinese National Knowledge Infrastructure (CNKI). In addition, industrial practitioners and leading researchers in academia were interviewed. Results: Biopharmaceutical in China was established through international knowledge transfer. The firms played more active role in commercializing biopharmaceutical in China though universities and research institutes were starting to interact with local firms and make contribution to biopharmaceutical industrialization. The transition of the Chinese government’s policies continuously shapes the evolution of biopharmaceutical sector. Policies have been dramatic changes before and after 1980s to encourage developing biopharmaceutical as a competitive industry for China. Conclusion: A SIS for biopharmaceutical has been shaped in China. However, currently biopharmaceutical is still a small sector in China, and for the further growth of the industry more synthetic policies should be implemented. Not only the policy supports towards the research and innovation of biopharmaceuticals in the early stage of development should be attended, but also commercialization of biopharmaceutical products in the later stage of sales. PMID:26673466

Biopharmaceutical Innovation System in China: System Evolution and Policy Transitions (Pre-1990s-2010s).

PubMed

Hu, Hao; Chung, Chao-Chen

2015-09-03

This article sets up the initial discussion of the evolution of biopharmaceutical innovation in China through the perspective of sectoral innovation system (SIS). Two data sources including archival documentary data and field interviews were used in this study. Archival documentary data was collected from China Food and Drug Administration (CFDA) and Chinese National Knowledge Infrastructure (CNKI). In addition, industrial practitioners and leading researchers in academia were interviewed. Biopharmaceutical in China was established through international knowledge transfer. The firms played more active role in commercializing biopharmaceutical in China though universities and research institutes were starting to interact with local firms and make contribution to biopharmaceutical industrialization. The transition of the Chinese government's policies continuously shapes the evolution of biopharmaceutical sector. Policies have been dramatic changes before and after 1980s to encourage developing biopharmaceutical as a competitive industry for China. A SIS for biopharmaceutical has been shaped in China. However, currently biopharmaceutical is still a small sector in China, and for the further growth of the industry more synthetic policies should be implemented. Not only the policy supports towards the research and innovation of biopharmaceuticals in the early stage of development should be attended, but also commercialization of biopharmaceutical products in the later stage of sales. © 2015 by Kerman University of Medical Sciences.

Library Searching: An Industrial User's Viewpoint.

ERIC Educational Resources Information Center

Hendrickson, W. A.

1982-01-01

Discusses library searching of chemical literature from an industrial user's viewpoint, focusing on differences between academic and industrial researcher's searching techniques of the same problem area. Indicates that industry users need more exposure to patents, work with abstracting services and continued improvement in computer searching…

15 CFR 1160.3 - Assistance to industrial technology partnerships.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Assistance to industrial technology... Trade (Continued) TECHNOLOGY ADMINISTRATION, DEPARTMENT OF COMMERCE PRODUCTIVITY, TECHNOLOGY AND INNOVATION Promotion of Private Sector Industrial Technology Partnerships § 1160.3 Assistance to industrial...

Facts & Figures for the Chemical Industry at a Glance--3. Employment in the Chemical Industry: Chemical Employment Growth Continues.

ERIC Educational Resources Information Center

Chemical and Engineering News, 1989

1989-01-01

Notes that the number of workers employed in the U.S. chemical industry rose again in 1988. Provides information for the years 1978-88 for the areas of industrial employment, scientist and engineer employment, corporation employment, wages, and industrial productivity. (MVL)

Assessment of land allotment support power industry in Grati, Pasuruan Regency

NASA Astrophysics Data System (ADS)

Muzaqqi, M. A. R.

2017-06-01

The industrial sector is always in need of land for factory as well as other supporting facilities, on the other side of the ability of the environment (support) the uneven terrain of every area in favor of intensive activities such as industry. Land uses that are not adapted to the support power, will cause pollution, damage, disaster and loss that generally uses the environment. The purpose of this research was to assess the resources support neighborhood Grati district associated with the existence of a plan to build an industrial area in accordance with the direction of Grati utilization of space in the spatial plan of the Pasuruan Regency area. In this study of land carrying capacity power comparison capability and land use. The Analysis technique used is the technique of overlay with analysis tools namely software using the software Arcgis 10.1. The parameters of the ability of land-adapted to the characteristics of the land for industry, namely the slope the slope ranges 0-25% on the slope of 25-45% can be developed with industry improvement area contours, and on a slope above 45% not allocated as an industrial area, the type of soil that is not easy slopes, the intensity of the rain of less than 3000 mm, potential landslide and flood-prone lowlands. Each parameter will be provided scoring between 1-5. Score of 1 was given to the condition of land the most harm, and a score of 5 is given for the condition of the land which supports most of the location industry. The result scoring is divided in 5 clases those are bad (5-9), is bad (9.1-13), medium (13.1), good (17,1-9) and good (21.1-25). The need for industrial land, calculated from the vast land of existing industries. Based on research results, obtained the ability to land on the area of research has 3 classes of 5 classes, i.e. good, moderate and bad. The results of the comparison between the broad capabilities and the needs of the farm industry, it can be concluded that the power of the land to support the industry in Grati still has not been exceeded.

Panel discussions: Industrial support sector requirements

NASA Technical Reports Server (NTRS)

Washom, B.

1982-01-01

Industrial support was the subject of a panel discussion on solar energy technology. Members of various energy-related businesses and agencies were present. Topics cofered include: (1) solar collectors; (2) solar energy policy; (3) government/industry relations; and (4) economic factors which influence the use of solar energy.

15 CFR 700.16 - Changes or cancellations of priority ratings and rated orders.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE NATIONAL SECURITY INDUSTRIAL BASE REGULATIONS DEFENSE PRIORITIES AND ALLOCATIONS SYSTEM Industrial Priorities § 700...

Partnering with Industry to Deliver Continuing Education to Florida's Licensed Pesticide Applicators

ERIC Educational Resources Information Center

Fishel, Fred

2014-01-01

Partnering with private industry can empower Extension educators to enhance their educational outreach efforts. Since 2011, UF/IFAS has cooperated with the Florida Turfgrass Association in conducting a 1-day statewide Polycom® event for providing continuing education to licensed pesticide applicators employed primarily in the ornamental and…

78 FR 63496 - Notice of Determinations Regarding Eligibility To Apply for Worker Adjustment Assistance

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-24

... domestic industry in an investigation resulting in-- (A) an affirmative determination of serious injury or... Continuity and Manpower, Jamestown, NY August 20, 2012. Working On-Site at Bush Industries, Inc., Mason Drive Facility. 83,012D Continuity and Manpower, Jamestown, NY August 20, 2012. Working On-Site at Bush...

Economic impact of ethanol production on U.S. livestock sector: A spatial analysis of corn and distillers grain shipment

NASA Astrophysics Data System (ADS)

N'guessan, Yapo Genevier

2007-12-01

The production of corn-based ethanol in the U.S. has increased from 1,630 million gallons in 2000 to 4,855 million gallons in 2006, representing a 198% growth over the period considered. This growth is favored by the availability of more efficient technologies in the production process of ethanol and is sustained by the high prices of ethanol in the market. The industry is also supported by a favorable public policy, expressed in the form of laws, mandating an increase in the use of ethanol, and also in the form of tax incentives. The tremendous increase in the use of corn for the ethanol industry is made at the expense of the livestock industry that was the traditional destination for much of the U.S. corn grain. As the ethanol industry continues to expand, concerns are raised in regard to its impact as more and more corn is diverted from the livestock sector. This study investigates the economic impact of the ethanol industry on the U.S. livestock sector. Specifically, a shipping cost model is developed to simulate the impact of the ethanol industry on the shipping cost of corn at the national and individual state levels. The dynamics for major livestock producing states are also analyzed at the crop reporting district level. Different scenarios based on assumptions on the availability of corn and the production capacities of the ethanol industry are displayed. Results from the model indicate that nationwide there is a 5 to 22% increase in the shipping cost of corn for the livestock industry due to the ethanol industry, depending on the scenario involved. At the state level, there is an increase in the transportation cost for most of the states, with shipping cost doubling in some cases. Nevertheless, some states benefit from the dynamics created by the development of ethanol plants and are experiencing a reduction in their livestock industry corn transportation cost.

Smart wearable systems: current status and future challenges.

PubMed

Chan, Marie; Estève, Daniel; Fourniols, Jean-Yves; Escriba, Christophe; Campo, Eric

2012-11-01

Extensive efforts have been made in both academia and industry in the research and development of smart wearable systems (SWS) for health monitoring (HM). Primarily influenced by skyrocketing healthcare costs and supported by recent technological advances in micro- and nanotechnologies, miniaturisation of sensors, and smart fabrics, the continuous advances in SWS will progressively change the landscape of healthcare by allowing individual management and continuous monitoring of a patient's health status. Consisting of various components and devices, ranging from sensors and actuators to multimedia devices, these systems support complex healthcare applications and enable low-cost wearable, non-invasive alternatives for continuous 24-h monitoring of health, activity, mobility, and mental status, both indoors and outdoors. Our objective has been to examine the current research in wearable to serve as references for researchers and provide perspectives for future research. Herein, we review the current research and development of and the challenges facing SWS for HM, focusing on multi-parameter physiological sensor systems and activity and mobility measurement system designs that reliably measure mobility or vital signs and integrate real-time decision support processing for disease prevention, symptom detection, and diagnosis. For this literature review, we have chosen specific selection criteria to include papers in which wearable systems or devices are covered. We describe the state of the art in SWS and provide a survey of recent implementations of wearable health-care systems. We describe current issues, challenges, and prospects of SWS. We conclude by identifying the future challenges facing SWS for HM. Copyright © 2012 Elsevier B.V. All rights reserved.

Attendees' perceptions of commercial influence in noncommercially funded CME programs.

PubMed

Goldfarb, Elizabeth; Baer, Lee; Fromson, John A; Gorrindo, Tristan; Iodice, Kristin E; Birnbaum, Robert J

2012-01-01

The controversy surrounding commercial support for continuing medical education (CME) programs has led to policy changes, but data show no significant difference in perceived bias between commercial and noncommercial CME. Indeed, what attendees perceive as commercial influence is not fully understood. We sought to clarify what sources contribute to attendees' perceptions of commercial influence in non-industry-supported CME programs, and how attendees perceive that this influence manifests itself on both speaker and program levels. Evaluation forms were received from 1 544 attendees at 14 live noncommercially supported CME programs in 2006, 2007, and 2010. Attendees rated perceived commercial influence for each lecture and the entire program. Using open-ended and "check all that apply'' questions, participants specified perceived sources and manifestations of commercial influence. Attendees rating individual lectures but not the entire program as commercially influenced accounted for 59.9% of those who identified bias. The most frequently endorsed source of commercial influence was individual speakers' funding, and the most listed manifestations were speakers' mentions of pharmaceuticals and expressions of personal opinions. Rating the entire program commercially influenced correlated with whether attendees considered the funding of referenced research a source of influence. CME attendees consider a broad spectrum of factors when reporting commercial influence. Evaluation forms should include bias questions per lecture as well as items to clarify perceived sources and manifestations of commercial influence. Copyright © 2012 The Alliance for Continuing Education in the Health Professions, the Society for Academic Continuing Medical Education, and the Council on CME, Association for Hospital Medical Education.

Spinoff 2004

NASA Technical Reports Server (NTRS)

2004-01-01

The Innovative Partnerships Program of NASA s Exploration Systems Mission Directorate was established to guarantee the transfer of the Space Program s technical advances. Brimming with examples of technologies that have led to significant improvements in quality of life, NASA s technology transfer program has been the conduit for these achievements. The program excels by maintaining established relationships with commercial industries that include and extend beyond the aerospace sector. Spinoff 2004 highlights the diverse benefits that have grown from NASA s partnerships with U.S. companies. These products span the many disciplines of our society. Included among this year s achievements are a natural, low-calorie sugar that is safe for diabetics and contact lenses that offer the benefits of a laser-corrective eye procedure without the need for surgery. This issue also showcases some of the many research and development activities being conducted by NASA s field centers. These activities continue to fuel the Agency s missions, which collectively contribute to making the Vision for Space Exploration a reality. NASA is focusing on identifying common research interests with industry, enabling both parties to leverage their research and produce a technology that will help both the Agency and the private commercial venture. These dual-use joint ventures support the development of new exploration strategies, vehicles, and technologies, while continuing to bring space technologies back down to Earth.

HPC Annual Report 2017

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dennig, Yasmin

Sandia National Laboratories has a long history of significant contributions to the high performance community and industry. Our innovative computer architectures allowed the United States to become the first to break the teraFLOP barrier—propelling us to the international spotlight. Our advanced simulation and modeling capabilities have been integral in high consequence US operations such as Operation Burnt Frost. Strong partnerships with industry leaders, such as Cray, Inc. and Goodyear, have enabled them to leverage our high performance computing (HPC) capabilities to gain a tremendous competitive edge in the marketplace. As part of our continuing commitment to providing modern computing infrastructuremore » and systems in support of Sandia missions, we made a major investment in expanding Building 725 to serve as the new home of HPC systems at Sandia. Work is expected to be completed in 2018 and will result in a modern facility of approximately 15,000 square feet of computer center space. The facility will be ready to house the newest National Nuclear Security Administration/Advanced Simulation and Computing (NNSA/ASC) Prototype platform being acquired by Sandia, with delivery in late 2019 or early 2020. This new system will enable continuing advances by Sandia science and engineering staff in the areas of operating system R&D, operation cost effectiveness (power and innovative cooling technologies), user environment and application code performance.« less

As Teachers Tell It: Implementing All Aspects of the Industry. Supporting Materials. [Volume Two.

ERIC Educational Resources Information Center

Andrew, Erika Nielsen, Ed.

This document contains supporting materials from five case studies illustrating the All Aspects of the Industry (AAI) approach. AAI provides a framework for redesigning programs around broadly conceived, interdisciplinary, industry-focused programs and integrating academic and vocational education. Materials from the Boston (Massachusetts) Public…

Iowa State Mining and Mineral Resources Research Institute

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-08-01

This final report describes the activities of the Iowa State Mining and Mineral Resources Research Institute (ISMMRRI) at Iowa State University for the period July 1, 1989, to June 30, 1990. Activities include research in mining- and mineral-related areas, education and training of scientists and engineers in these fields, administration of the Institute, and cooperative interactions with industry, government agencies, and other research centers. During this period, ISMMRRI has supported research efforts to: (1) Investigate methods of leaching zinc from sphalerite-containing ores. (2) Study the geochemistry and geology of an Archean gold deposit and of a gold-telluride deposit. (3) Enchancemore » how-quality aggregates for use in construction. (4) Pre-clean coal by triboelectric charging in a fluidized-bed. (5) Characterize the crystal/grain alignment during processing of yttrium-barium-copper-perovskite (1-2-3) superconductors. (5) Study the fluid inclusion properties of a fluorite district. (6) Study the impacts of surface mining on community planning. (7) Assess the hydrophobicity of coal and pyrite for beneficiation. (8) Investigate the use of photoacoustic absorption spectroscopy for monitoring unburnt carbon in the exhaust gas from coal-fired boilers. The education and training program continued within the interdepartmental graduate minor in mineral resources includes courses in such areas as mining methods, mineral processing, industrial minerals, extractive metallurgy, coal science and technology, and reclamation of mined land. In addition, ISMMRRI hosted the 3rd International Conference on Processing and Utilization of High-Sulfur Coals in Ames, Iowa. The Institute continues to interact with industry in order to foster increased cooperation between academia and the mining and mineral community.« less

Thirty Years of Innovation in Seismology with the IRIS Consortium

NASA Astrophysics Data System (ADS)

Sumy, D. F.; Woodward, R.; Aderhold, K.; Ahern, T. K.; Anderson, K. R.; Busby, R.; Detrick, R. S.; Evers, B.; Frassetto, A.; Hafner, K.; Simpson, D. W.; Sweet, J. R.; Taber, J.

2015-12-01

The United States academic seismology community, through the National Science Foundation (NSF)-funded Incorporated Research Institutions for Seismology (IRIS) Consortium, has promoted and encouraged a rich environment of innovation and experimentation in areas such as seismic instrumentation, data processing and analysis, teaching and curriculum development, and academic science. As the science continually evolves, IRIS helps drive the market for new research tools that enable science by establishing a variety of standards and goals. This has often involved working directly with manufacturers to better define the technology required, co-funding key development work or early production prototypes, and purchasing initial production runs. IRIS activities have helped establish de-facto international standards and impacted the commercial sector in areas such as seismic instrumentation, open-access data management, and professional development. Key institutional practices, conducted and refined over IRIS' thirty-year history of operations, have focused on open-access data availability, full retention of maximum-bandwidth, continuous data, and direct community access to state-of-the-art seismological instrumentation and software. These practices have helped to cultivate and support a thriving commercial ecosystem, and have been a key element in the professional development of multiple generations of seismologists who now work in both industry and academia. Looking toward the future, IRIS is increasing its engagement with industry to better enable bi-directional exchange of techniques and technology, and enhancing the development of tomorrow's workforce. In this presentation, we will illustrate how IRIS has promoted innovations grown out of the academic community and spurred technological advances in both academia and industry.

Trends in the Information Industry.

ERIC Educational Resources Information Center

Hogan, Thomas H.

1987-01-01

The current president of the American Society for Information Science shares his observations about the information industry, identifying positive and negative trends, and discusses the role ASIS can play in the continuing growth of the industry. (Author/CLB)

Commercial influence and learner-perceived bias in continuing medical education.

PubMed

Steinman, Michael A; Boscardin, Christy K; Aguayo, Leslie; Baron, Robert B

2010-01-01

To directly examine the relationship between commercial support of continuing medical education (CME) and perceived bias in the content of these activities. Cross-sectional study of 213 accredited live educational programs organized by a university provider of CME from 2005 to 2007. A standard question from course evaluations was used to determine the degree to which attendees believed commercial bias was present. Binomial regression models were used to determine the association between course features that may introduce commercial bias and the extent of perceived bias at those CME activities. Mean response rate for attendee evaluations was 56% (SD 15%). Commercial support covered 20%-49% of costs for 45 (21%) educational activities, and > or = 50% of costs for 46 activities (22%). Few course participants perceived commercial bias, with a median of 97% (interquartile range 95%-99%) of respondents stating that the activity they attended was free of commercial bias. There was no association between extent of commercial support and the degree of perceived bias in CME activities. Similarly, perceived bias did not vary for 11 of 12 event characteristics evaluated as potential sources of commercial bias, or by score on a risk index designed to prospectively assess risk of commercial bias. Rates of perceived bias were low for the vast majority of CME activities in the sample and did not differ by the degree of industry support or other event characteristics. Further study is needed to determine whether commercial influence persisted in more subtle forms that were difficult for participants to detect.

Personalized use of ICT--from telemonitoring to ambient assisted living.

PubMed

Norgall, Thomas; Wichert, Reiner

2013-01-01

Individual availability of information and communications technology (ICT) has enabled "Personal Health" applications like the continuous ubiquitous telemonitoring of vital signs. The concept of Ambient Assisted Living (AAL) goes beyond health and care applications utilizing home automation technology for supporting individuals with specific needs, particularly enabling elderly to live in their accustomed home as long as possible. These users usually suffer from more than one disease and need compensation of several impairments. Most current AAL projects and products however provide insulated solutions addressing only a small selection of these user needs. For comprehensive dynamic system adaptation to changing user needs an open platform supporting interoperable components is required. While the industry-driven Continua Health Alliance developed a corresponding Personal Health ecosystem, the ongoing European project universAAL aims at a universal platform for both AAL and Personal Health applications.

Development of critical dimension measurement scanning electron microscope for ULSI (S-8000 series)

NASA Astrophysics Data System (ADS)

Ezumi, Makoto; Otaka, Tadashi; Mori, Hiroyoshi; Todokoro, Hideo; Ose, Yoichi

1996-05-01

The semiconductor industry is moving from half-micron to quarter-micron design rules. To support this evolution, Hitachi has developed a new critical dimension measurement scanning electron microscope (CD-SEM), the model S-8800 series, for quality control of quarter- micron process lines. The new CD-SEM provides detailed examination of process conditions with 5 nm resolution and 5 nm repeatability (3 sigma) at accelerating voltage 800 V using secondary electron imaging. In addition, a newly developed load-lock system has a capability of achieving a high sample throughput of 20 wafers/hour (5 point measurements per wafer) under continuous operation. To support user friendliness, the system incorporates a graphical user interface (GUI), an automated pattern recognition system which helps locating measurement points, both manual and semi-automated operation, and user-programmable operating parameters.

[Advanced Composites Technology Initiatives

NASA Technical Reports Server (NTRS)

Julian, Mark R.

2002-01-01

This final report closes out the W02 NASA Grant #NCC5-646. The FY02 grant for advanced technology initiatives through the Advanced Composites Technology Institute in Bridgeport, WV, at the Robert C. Byrd Institute (RCBI) Bridgeport Manufacturing Technology Center, is complete; all funding has been expended. RCBI continued to expand access to technology; develop and implement a workforce-training curriculum; improve material development; and provide prototyping and demonstrations of new and advanced composites technologies for West Virginia composites firms. The FY 02 efforts supported workforce development, technical training and the HST development effort of a super-lightweight composite carrier prototype and expanded the existing technical capabilities of the growing aerospace industry across West Virginia to provide additional support for NASA missions. Additionally, the Composites Technology and Training Center was awarded IS0 9001 - 2000 certification and Cleanroom Class 1000 certification during this report period.

Development of Technical Basis for Burnup Credit Regulatory Guidance in the United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parks, Cecil V; Wagner, John C; Mueller, Don

2011-01-01

In the United States (U.S.) there has been and continues to be considerable interest in the increased use of burnup credit as part of the safety basis for SNF systems and this interest has motivated numerous technical studies related to the application of burnup credit for maintaining subcriticality. Responding to industry requests and needs, the U.S. Nuclear Regulatory Commission initiated a burnup credit research program, with support from the Oak Ridge National Laboratory, to develop regulatory guidance and the supporting technical basis for allowing and expanding the use of burnup credit in pressurized-water reactor SNF storage and transport applications. Themore » objective of this paper is to summarize the work and significant accomplishments, with references to the technical reports and publications for complete details.« less

Does living near heavy industry cause lung cancer in women? A case-control study using life grid interviews.

PubMed

Edwards, R; Pless-Mulloli, T; Howel, D; Chadwick, T; Bhopal, R; Harrison, R; Gribbin, H

2006-12-01

The incidence of lung cancer among women is high in the highly industrialised area of Teesside in north-east England. Previous research has implicated industrial pollution as a possible cause. A study was undertaken to investigate whether prolonged residence close to heavy industry is associated with lung cancer among women in Teesside. Two hundred and four women aged <80 years with incident primary lung cancer and 339 age matched community controls were recruited to a population based case-control study. Life course residential, occupational, and active and passive smoking histories were obtained using an interviewer administered questionnaire. The age adjusted odds ratio (OR) for lung cancer among people living >25 years v 0 years near (within 0-5 km) heavy industry in Teesside was 2.13 (95% CI 1.34 to 3.38). After adjustment for confounding factors the OR was 1.83 (95% CI 0.82 to 4.08) for >25 years or 1.10 (95% CI 0.96 to 1.26) for an additional 10 years living near industry. ORs were similar after residence near heavy industry outside Teesside was also included, and when latency was allowed for by disregarding residential exposures within the last 20 years. Adjustment for active smoking had the greatest effect on the OR. This population based study using life grid interviews for life course exposure assessment has addressed many deficiencies in the design of previous studies. The findings support those in most of the international literature of a modestly raised risk of lung cancer with prolonged residence close to heavy industry, although the confidence intervals were wide. The effect of air pollution on the incidence of lung cancer merits continued study.

Driving research in infant and children's nutrition: a perspective on industry.

PubMed

Rai, Deshanie; Larson, Brian

2009-05-01

As part of the workshop entitled "Early Risk Determinants and Later Health Outcomes: Implications for Research Prioritization and the Food Supply" (8-9 July 2008, Washington, DC), which was cosponsored by the International Life Sciences Institute of North America and the International Life Sciences Institute Research Foundation, representatives of the food industry discussed the practical application of nutrition science. Nutrition plays a key role in guiding health outcomes throughout the life cycle. In particular, the prenatal, postnatal, and early childhood periods are extremely sensitive to the presence of appropriate nutrition. A growing body of evidence shows that early nutrition may program the unborn and the infant's key physiologic systems, including the endocrine, cardiovascular, and central nervous systems, to influence later life outcomes. While scientists in academia continue to explore the multifactorial nature of early risk determinants and later life outcomes at a mechanistic and basic science level, it is important to understand the potential of the infant and child food industries to address questions such as what factors have been noted to drive research in these sectors of the food industry. How can scientists in these industries work alongside the scientists in academia and in government to set priorities, make decisions around these health issues, and translate academic insights into innovative nutritional solutions for the benefit of public health? Given the commitment of the infant and child food industries to deliver scientifically supported early life nutrition, it is easy to understand why this industry would work in partnership with both the scientists in academia and the government to identify a means of addressing the fundamental questions of this workshop.

46 CFR 111.107-1 - Industrial systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 4 2014-10-01 2014-10-01 false Industrial systems. 111.107-1 Section 111.107-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Industrial Systems § 111.107-1 Industrial systems. (a) For the purpose of this subpart, an...

46 CFR 111.107-1 - Industrial systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false Industrial systems. 111.107-1 Section 111.107-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Industrial Systems § 111.107-1 Industrial systems. (a) For the purpose of this subpart, an...

46 CFR 111.107-1 - Industrial systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 4 2013-10-01 2013-10-01 false Industrial systems. 111.107-1 Section 111.107-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Industrial Systems § 111.107-1 Industrial systems. (a) For the purpose of this subpart, an...

46 CFR 111.107-1 - Industrial systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 4 2011-10-01 2011-10-01 false Industrial systems. 111.107-1 Section 111.107-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Industrial Systems § 111.107-1 Industrial systems. (a) For the purpose of this subpart, an...

46 CFR 111.107-1 - Industrial systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Industrial systems. 111.107-1 Section 111.107-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Industrial Systems § 111.107-1 Industrial systems. (a) For the purpose of this subpart, an...

15 CFR 710.4 - Overview of scheduled chemicals and examples of affected industries.

Code of Federal Regulations, 2014 CFR

2014-01-01

... examples of affected industries. 710.4 Section 710.4 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE CHEMICAL... REGULATIONS (CWCR) § 710.4 Overview of scheduled chemicals and examples of affected industries. The following...

The Usefulness of Learning Objects in Industry Oriented Learning Environments

ERIC Educational Resources Information Center

Fernando, Shantha; Sol, Henk; Dahanayake, Ajantha

2012-01-01

A model is presented to evaluate the usefulness of learning objects for industry oriented learning environments that emphasise training university graduates for job opportunities in a competitive industry oriented economy. Knowledge workers of the industry seek continuous professional development to keep their skills and knowledge up to date. Many…

47 CFR 90.35 - Industrial/Business Pool.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 5 2012-10-01 2012-10-01 false Industrial/Business Pool. 90.35 Section 90.35 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PRIVATE LAND MOBILE RADIO SERVICES Industrial/Business Radio Pool § 90.35 Industrial/Business Pool. (a) Eligibility. Persons primarily engaged in any of...

47 CFR 90.35 - Industrial/Business Pool.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 5 2014-10-01 2014-10-01 false Industrial/Business Pool. 90.35 Section 90.35 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PRIVATE LAND MOBILE RADIO SERVICES Industrial/Business Radio Pool § 90.35 Industrial/Business Pool. (a) Eligibility. Persons primarily engaged in any of...

47 CFR 90.35 - Industrial/Business Pool.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Industrial/Business Pool. 90.35 Section 90.35 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PRIVATE LAND MOBILE RADIO SERVICES Industrial/Business Radio Pool § 90.35 Industrial/Business Pool. (a) Eligibility. Persons primarily engaged in any of...

47 CFR 90.35 - Industrial/Business Pool.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 5 2013-10-01 2013-10-01 false Industrial/Business Pool. 90.35 Section 90.35 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PRIVATE LAND MOBILE RADIO SERVICES Industrial/Business Radio Pool § 90.35 Industrial/Business Pool. (a) Eligibility. Persons primarily engaged in any of...

47 CFR 90.35 - Industrial/Business Pool.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 5 2011-10-01 2011-10-01 false Industrial/Business Pool. 90.35 Section 90.35 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PRIVATE LAND MOBILE RADIO SERVICES Industrial/Business Radio Pool § 90.35 Industrial/Business Pool. (a) Eligibility. Persons primarily engaged in any of...

The Toxicology Education Summit: Building the Future of Toxicology Through Education

PubMed Central

Barchowsky, Aaron; Buckley, Lorrene A.; Carlson, Gary P.; Fitsanakis, Vanessa A.; Ford, Sue M.; Genter, Mary Beth; Germolec, Dori R.; Leavens, Teresa L.; Lehman-McKeeman, Lois D.; Safe, Stephen H.; Sulentic, Courtney E. W.; Eidemiller, Betty J.

2012-01-01

Toxicology and careers in toxicology, as well as many other scientific disciplines, are undergoing rapid and dramatic changes as new discoveries, technologies, and hazards advance at a blinding rate. There are new and ever increasing demands on toxicologists to keep pace with expanding global economies, highly fluid policy debates, and increasingly complex global threats to public health. These demands must be met with new paradigms for multidisciplinary, technologically complex, and collaborative approaches that require advanced and continuing education in toxicology and associated disciplines. This requires paradigm shifts in educational programs that support recruitment, development, and training of the modern toxicologist, as well as continued education and retraining of the midcareer professional to keep pace and sustain careers in industry, government, and academia. The Society of Toxicology convened the Toxicology Educational Summit to discuss the state of toxicology education and to strategically address educational needs and the sustained advancement of toxicology as a profession. The Summit focused on core issues of: building for the future of toxicology through educational programs; defining education and training needs; developing the “Total Toxicologist”; continued training and retraining toxicologists to sustain their careers; and, finally, supporting toxicology education and professional development. This report summarizes the outcomes of the Summit, presents examples of successful programs that advance toxicology education, and concludes with strategies that will insure the future of toxicology through advanced educational initiatives. PMID:22461448

The Toxicology Education Summit: building the future of toxicology through education.

PubMed

Barchowsky, Aaron; Buckley, Lorrene A; Carlson, Gary P; Fitsanakis, Vanessa A; Ford, Sue M; Genter, Mary Beth; Germolec, Dori R; Leavens, Teresa L; Lehman-McKeeman, Lois D; Safe, Stephen H; Sulentic, Courtney E W; Eidemiller, Betty J

2012-06-01

Toxicology and careers in toxicology, as well as many other scientific disciplines, are undergoing rapid and dramatic changes as new discoveries, technologies, and hazards advance at a blinding rate. There are new and ever increasing demands on toxicologists to keep pace with expanding global economies, highly fluid policy debates, and increasingly complex global threats to public health. These demands must be met with new paradigms for multidisciplinary, technologically complex, and collaborative approaches that require advanced and continuing education in toxicology and associated disciplines. This requires paradigm shifts in educational programs that support recruitment, development, and training of the modern toxicologist, as well as continued education and retraining of the midcareer professional to keep pace and sustain careers in industry, government, and academia. The Society of Toxicology convened the Toxicology Educational Summit to discuss the state of toxicology education and to strategically address educational needs and the sustained advancement of toxicology as a profession. The Summit focused on core issues of: building for the future of toxicology through educational programs; defining education and training needs; developing the "Total Toxicologist"; continued training and retraining toxicologists to sustain their careers; and, finally, supporting toxicology education and professional development. This report summarizes the outcomes of the Summit, presents examples of successful programs that advance toxicology education, and concludes with strategies that will insure the future of toxicology through advanced educational initiatives.

Pharmaceutical industry exposure in our hospitals: the final frontier.

PubMed

Dean, Jessica; Loh, Erwin; Coleman, Justin J

2016-01-18

Despite recent changes in attitudes, most hospitals continue to experience pharmaceutical industry presence. Pharmaceutical industry presence may be necessary and beneficial in the context of sponsorship of clinical trials with appropriate governance. Doctors continue to hold positive attitudes towards market-oriented activities of the pharmaceutical and medical device industries. Despite evidence to the contrary, doctors believe they are able to effectively manage pharmaceutical sales representative interactions such that their own prescribing is not adversely impacted. Doctors also share a belief that small gifts and benefits are harmless. There may be significant financial burden associated with divestment of such sponsorship by hospitals. Change requires education and effective policies to manage pharmaceutical industry relationships and conflicts of interest. We discuss case studies involving students and public hospital doctors to show that divestment is possible without significant financial detriment. Health services need to be proactive in transitioning financial and cultural reliance on pharmaceutical industry sponsorship to other potentially less harmful sources.

New frontier, new power: the retail environment in Australia's dark market

PubMed Central

Carter, S

2003-01-01

Objective: To investigate the role of the retail environment in cigarette marketing in Australia, one of the "darkest" markets in the world. Design: Analysis of 172 tobacco industry documents; and articles and advertisements found by hand searching Australia's three leading retail trade journals. Results: As Australian cigarette marketing was increasingly restricted, the retail environment became the primary communication vehicle for building cigarette brands. When retail marketing was restricted, the industry conceded only incrementally and under duress, and at times continues to break the law. The tobacco industry targets retailers via trade promotional expenditure, financial and practical assistance with point of sale marketing, alliance building, brand advertising, and distribution. Cigarette brand advertising in retail magazines are designed to build brand identities. Philip Morris and British American Tobacco are now competing to control distribution of all products to retailers, placing themselves at the heart of retail business. Conclusions: Cigarette companies prize retail marketing in Australia's dark market. Stringent point of sale marketing restrictions should be included in any comprehensive tobacco control measures. Relationships between retailers and the industry will be more difficult to regulate. Retail press advertising and trade promotional expenditure could be banned. In-store marketing assistance, retail–tobacco industry alliance building, and new electronic retail distribution systems may be less amenable to regulation. Alliances between the health and retail sectors and financial support for a move away from retail dependence on tobacco may be necessary to effect cultural change. PMID:14645954

Flow in porous media, phase behavior and ultralow interfacial tensions: mechanisms of enhanced petroleum recovery. Final technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davis, H.T.; Scriven, L.E.

1982-01-01

A major program of university research, longer-ranged and more fundamental in approach than industrial research, into basic mechanisms of enhancing petroleum recovery and into underlying physics, chemistry, geology, applied mathematics, computation, and engineering science has been built at Minnesota. The 1982 outputs of the interdisciplinary team of investigators were again ideas, instruments, techniques, data, understanding and skilled people: forty-one scientific and engineering papers in leading journals; four pioneering Ph.D. theses; numerous presentations to scientific and technical meetings, and to industrial, governmental and university laboratories; vigorous program of research visits to and from Minnesota; and two outstanding Ph.D.'s to research positionsmore » in the petroleum industry, one to a university faculty position, one to research leadership in a governmental institute. This report summarizes the 1982 papers and theses and features sixteen major accomplishments of the program during that year. Abstracts of all forty-five publications in the permanent literature are appended. Further details of information transfer and personnel exchange with industrial, governmental and university laboratories appear in 1982 Quarterly Reports available from the Department of Energy and are not reproduced here. The Minnesota program continues in 1983, notwithstanding earlier uncertainty about the DOE funding which finally materialized and is the bulk of support. Supplemental grants-in-aid from nine companies in the petroleum industry are important, as are the limited University and departmental contributions. 839 references, 172 figures, 29 tables.« less

The minicell TMirradiator: A new system for a new market

NASA Astrophysics Data System (ADS)

Clouser, James F.; Beers, Eric W.

1998-06-01

Since the commissioning of the first industrial Gamma Irradiator design, designers and operators of irradiation systems have been attempting to meet the specific production requirements and challenges presented to them. This objective has resulted in many different versions of irradiators currently in service today, all of which had original charters and many of which still perform very well within even the new requirements of this industry. Continuing changes in the marketplace have, however, placed pressures on existing designs due to a combination of changing dose requirements for sterlization, increased economic pressures from the specific industry served for both time and location and the increasing variety of product types requiring processing. Additionally, certain market areas which could never economically support a typical gamma processing facility have either not been serviced, or have forced potential gamma users to transport product long distances to one of these existing facilities. The MiniCell TM removes many of the traditional barriers previously accepted in the radiation processing industry for building a processing facility in a location. Its reduced size and cost have allowed many potential users to consider in-house processing and its ability to be quickly assembled allow it to meet market needs in a much more timely fashion than the previous designs. The MiniCell system can cost effectively meet many of the current market needs of reducing total cost of processing and also be flexible enough to process product in a wide range of industries effectively.

National Nanotechnology Initiative. Research and Development Supporting the Next Industrial Revolution. Supplement to the President’s 2004 Budget

DTIC Science & Technology

2004-01-01

and Development Supporting the Next Industrial Revolution Supplement to the President’s FY 2004 Budget National Science and Technology Council...potential to profoundly change our economy, to improve our standard of living, and to bring about the next industrial revolution . Nanotechnology: From

An evaluation of continuous emissions monitoring systems for improving industrial boiler efficiency

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eckerlin, H.M.; Hall, R.C.

1996-12-31

An experimental evaluation of currently available continuous emissions monitoring systems has been conducted at an industrial boiler facility. The analyzers used in the study represented a range of sensors and sampling systems. The performance of three systems was monitored and compared over a six-month period. Careful records were also kept on installation, calibration and maintenance requirements. Research results suggest that (at present) the close-coupled extractive systems using a zirconium oxide sensor (for O{sub 2}) and a catalytic combustibles sensor (for CO/combustibles) offer the most reliable, trouble-free performance. The project also provided valuable insights on a variety of issues relating tomore » the continuous monitoring of emissions from industrial boilers.« less

An evaluation of continuous emissions monitoring systems for improving industrial boiler efficiency

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eckerlin, H.M.; Hall, R.C.

1996-05-01

An experimental evaluation of currently available continuous emissions monitoring systems has been conducted at an industrial boiler facility. The analyzers used in the study represented a range of sensors and sampling systems. The performance of three systems was monitored and compared over a six-month period. Careful records were also kept on installation, calibration and maintenance requirements. Research results suggest that (at present) the close-coupled extractive systems using a zirconium oxide sensor (for O{sub 2}) and a catalytic combustibles sensor (for CO/combustibles) offer the most reliable, trouble-free performance. The project also provided valuable insights on a variety of issues relating tomore » the continuous monitoring of emissions from industrial boilers.« less

Exploring opportunities for collaboration between the corporate sector and the dental education community.

PubMed

Alexander, D; Clarkson, J; Buchanan, R; Chadwick, G; Chesters, R; Drisko, C L; Douglass, C W; Farrell, L; Fletcher, K; Makoni, F; Monaco, M; Nordquist, B; Park, N I; Riggs, S; Schou, L; Smales, F C; Stamm, J W; Toh, C G; Volpe, T; Ward, P; Warren, P

2008-02-01

The ultimate purpose of both dental industry and dental education is to improve the oral health of the public. This report provides background information on the different roles and objectives of the dental industry and dental education communities, the different operating environment of each sector and also areas of common interest where collaboration will be of mutual benefit. The report addresses five areas for potential collaboration between the dental industry and the dental education communities: 1. Contribution to joint activities. 2. Effectiveness and efficiency. 3. Workforce needs. 4. Middle- and low-income countries. 5. The future of International Federation of Dental Educators and Associations (IFDEA). The traditional areas of support and their limitations that have been provided by industry are outlined in the report and some new approaches for collaboration are considered. Industry-based research has been an important factor in developing new products and technologies and in promoting oral health. However there is a need to facilitate the introduction of these developments at an early stage in the education process. Industry has to operate in an efficient manner to remain competitive and maximise its returns and therefore survive. The academic sector operates in a different environment and under different governance structures; although some trends are noted towards adoption of greater efficiency and financial accountability similar to industry. Opportunities to jointly develop best business practices should be explored. Industry has responded well to the oral health needs of the public through the development of new products and technologies. The education community needs to respond in a similar way by examining different healthcare delivery models worldwide and developing programmes to train members of the dental team to cater for future needs and demands of communities in different regions of the world. The reputation of industry-based scientists and clinicians is high, and their role in contributing to the dental education process in practical ways needs to be explored and further developed. Closer relationships between industry scientists and faculty and students could assist industrys need and desire to develop new technologies for the broader dental care system. The corporate sector can play a key role in the future success of IFDEA by providing support and expertise in developing areas such as regional leadership institutes, a Global Faculty and Network and in collaborating in developing continuing education programmes as well as involvement in its governance. Thirteen recommendations are made in the report. These are considered to be important initial steps in developing the already strong relationship between the education and corporate sectors. Partnership and collaborating more effectively along the lines suggested should, almost certainly, generate mutually beneficial outcomes, whilst serving over the long term to elevate the publics oral health status on a global basis.

Geomorphology and forest management in New Zealand's erodible steeplands: An overview

NASA Astrophysics Data System (ADS)

Phillips, Chris; Marden, Michael; Basher, Les R.

2018-04-01

In this paper we outline how geomorphological understanding has underpinned forest management in New Zealand's erodible steeplands, where it contributes to current forest management, and suggest where it will be of value in the future. We focus on the highly erodible soft-rock hill country of the East Coast region of North Island, but cover other parts of New Zealand where appropriate. We conclude that forestry will continue to make a significant contribution to New Zealand's economy, but several issues need to be addressed. The most pressing concerns are the incidence of post-harvest, storm-initiated landslides and debris flows arising from steepland forests following timber harvesting. There are three areas where geomorphological information and understanding are required to support the forest industry - development of an improved national erosion susceptibility classification to support a new national standard for plantation forestry; terrain analysis to support improved hazard and risk assessment at detailed operational scales; and understanding of post-harvest shallow landslide-debris flows, including their prediction and management.

Redefining and expanding quality assurance.

PubMed

Robins, J L

1992-12-01

To meet the current standards of excellence necessary for blood establishments, we have learned from industry that a movement toward organization-wide quality assurance/total quality management must be made. Everyone in the organization must accept responsibility for participating in providing the highest quality products and services. Quality must be built into processes and design systems to support these quality processes. Quality assurance has been redefined to include a quality planning function described as the most effective way of designing quality into processes. A formalized quality planning process must be part of quality assurance. Continuous quality improvement has been identified as the strategy every blood establishment must support while striving for error-free processing as the long-term objective. The auditing process has been realigned to support and facilitate this same objective. Implementing organization-wide quality assurance/total quality management is one proven plan for guaranteeing the quality of the 20 million products that are transfused into 4 million patients each year and for moving toward the new order.

Wearable smart systems: from technologies to integrated systems.

PubMed

Lymberis, A

2011-01-01

Wearable technology and integrated systems, so called Smart Wearable Systems (SWS) have demonstrated during the last 10-15 years significant advances in terms of, miniaturisation, seamless integration, data processing & communication, functionalisation and comfort. This is mainly due to the huge progress in sciences and technologies e.g. biomedical and micro & nano technologies, but also to a strong demand for new applications such as continuous personal health monitoring, healthy lifestyle support, human performance monitoring and support of professionals at risk. Development of wearable systems based of smart textile have, in addition, benefited from the eagerness of textile industry to develop new value-added apparel products like functionalized garments and smart clothing. Research and development in these areas has been strongly promoted worldwide. In Europe the major R&D activities were supported through the Information & Communication Technologies (ICT) priority of the R&D EU programs. The paper presents and discusses the main achievements towards integrated systems as well as future challenges to be met in order to reach a market with reliable and high value-added products.

Rideshare programs: a historical perspective

NASA Astrophysics Data System (ADS)

Horais, Brian J.

2000-11-01

In recent years there has been a significant increase in demand for testing, qualification and evaluation of satellite components in space. This will continue to be true with the dramatic growth in remote sensing and communication satellites and constellations. Finding ways to space qualify components and sensors without paying for expensive, dedicated space experiments has prompted a number of aerospace companies (large and small) and government organizations to increase their emphasis on providing low-cost access to space by means of secondary rides on primary payloads and launch vehicle structures. Proactive rideshare brokering is a process that supports space testing by actively providing the information, processes and equipment necessary to support successful space testing. As U.S. space programs have grown in scope and cost, the capacity to accetp risk as part of the development process has diminished - resulting in reduced levels of innovation and erosion of our space industry domination. In contrast, the international space community has instituted a number of innovative processes that support low cost entry to space for small programs. This has stimulated new space systems industries in many countries around the world. This growth is closely coupled with the dynamic growth in the International space launch industry. Proactive rideshare brokering takes a new approach to secondary payload integration. Many commercial and government payload integration services have taken the approach "If you build it they will come." This is not sufficiently aggressive to attract the new technologists who know very little about space testing. Proactive brokering must take a "You must go out and actively seek high-payoff technology payloads" approach to have a true impact on the implementation of new space system technologies. It should also include the application of proven practices from the international payload integration community. The paper draws conclusions by comparing what has been done historically and currently in the international space payload integration community versus what the current practices are in the U.S.. Observations and recommendations are made that reflect a reduced timeline approach and that acknowledge the close coupling between the technology base, the space systems industry, infrastructure and educational processes.

Physics and Innovation: A Large-Company Perspective

NASA Astrophysics Data System (ADS)

Doering, Robert

2013-03-01

With regard to its influence on innovation (i.e., creating new commercial technologies), physics continuously faces the challenge of ``keeping ahead of engineering'' and ``moving on'' to new concepts as well as to potentially new roles with respect to industrial research. For most large companies, the R&D model has undergone significant transformation over the past three decades. This has been driven, in part, by the increasing cost of continuously developing new technologies upon which to base state-of-the-art products. Part of this challenge is to select which new concepts and ``emerging technologies'' to pursue. A poor decision at this point wastes development resources and can be very difficult to overcome later. Therefore, a key feature of many new R&D models is collaboration with entities outside of the corporation. Such partnerships reduce both the cost and risk of exploring multiple lines of research which may lead to new technologies. One flexible approach to organizing R&D partnerships is via the establishment of a consortium. The semiconductor industry has successfully used research consortia since the founding of the Semiconductor Research Corporation (SRC) in 1982 and SEMATECH a few years later. The automotive industry has also used the consortium approach for many years since the formation of the United States Council for Automotive Research (USCAR) in 1992. In the case of the SRC, the principal operating methodology is for the members to create requests for proposals leading to the collective funding of university research. This is often done in partnership with federal agencies. For example, the Focus Center Research Program (FCRP, an SRC subsidiary) is co-funded with DARPA. Another SRC subsidiary, the Nanoelectronics Research Initiative (NRI) is jointly supported with the NSF and NIST. This NRI-agency partnership has partly been enabled by the National Nanotechnology Initiative's Signature Initiative on ``Nanoelectronics for 2020 and Beyond.'' Within the SRC portfolio, the NRI research is particularly ``physics intensive''! Of course, in addition to consortia, the new models typically include external R&D through consulting arrangements, IP licensing, and acquisition of smaller companies that have developed useful new technologies, supported in some cases by SBIRs and other forms of government investment in growth of the economy.

The United States digital recording industry

NASA Technical Reports Server (NTRS)

Simonds, John L.

1993-01-01

The recording industry resembles the semiconductor industry in several aspects. Both are large (greater than $60 Billion/year revenues); both are considered critical technologies supporting national objectives; both are experiencing increased competition from foreign suppliers; they recognize significant opportunities for both technological and market growth in the decade to come; and both realize that a key to this future growth lies in alliances among industry, academia, and government. The semiconductor industry has made significant investments in alliances relating to manufacturing technologies (SEMATECH) and to joint long-term technology research centered in universities (SRC). The federal government has provided funding support of these efforts in recognition of the critical roles semiconductor technologies play in national interests. The recording industry is now also forming critical alliances, but has been slower in starting and in gaining broad recognition by government agencies and legislators that the industry needs federal support. Traditionally, the recording industry has been viewed as mature, stable, and, while critical to national interests, able to chart and fund its own course toward future national needs. That perception is fortunately changing.

Psychological Distress in Afghan Refugees: A Mixed-Method Systematic Review

PubMed Central

Alemi, Qais; James, Sigrid; Cruz, Romalene; Zepeda, Veronica; Racadio, Michael

2013-01-01

Mental health problems disproportionately affect Afghan refugees and asylum seekers who continue to seek international protection with prolonged exposure to war. We performed a systematic review aimed at synthesizing peer-reviewed literature pertaining to mental health problems among Afghans resettled in industrialized nations. We used five databases to identify studies published between 1979 and 2013 that provided data on distress levels, and subjective experiences with distress. Seventeen studies met our inclusion criteria consisting of 1 mixed-method, 7 qualitative, and 9 quantitative studies. Themes from our qualitative synthesis described antecedents for distress being rooted in cultural conflicts and loss, and also described unique coping mechanisms. Quantitative findings indicated moderate to high prevalence of depressive and posttraumatic symptomatology. These findings support the need for continued mental health research with Afghans that accounts for: distress among newly resettled groups, professional help-seeking utilization patterns, and also culturally relevant strategies for mitigating distress and engaging Afghans in research. PMID:23784146

Reflections on the health workers' strike at Malawi's major tertiary hospital, QECH, Blantyre, 2001: a case study.

PubMed

Muula, A S; Phiri, A

2003-03-01

Health workers and support staff at Malawi's major referral hospital, the Queen Elizabeth Central Hospital, Blantyre, were on strike between 5th and 19th October 2001. The health workers' grievances included: lack of risk allowances; poor professional allowances; low salaries; and low housing allowances. The strike resulted in almost total closure of the 1500-bed hospital; only the burns and orthopaedic wards continued to serve patients. Volunteer staff, comprising the Red Cross, and nursing and medical students provided services. Verbal and written threats by the authorities had minimal effect on terminating the strike; rather, they encouraged the resolve to continue with the industrial action. We report aspects of the genesis, progress and resolution of the strike. Although not much seems to have been achieved, both the employer and the workers need to draw lessons from the experience.

LLNL/LANS mission committee meeting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burns, Michael J

2010-12-06

Recent events continue to show the national security imperative of the global security mission: (1) Fighting Proliferation - (a) At Yongbyon, 'a modern, industrial-scale U-enrichment facility w/2000 centrifuges' seen Nov. 2010, (b) In Iran, fueling began at Bushehr while P5+1/lran talks delayed to Dec. 2010; (2) Continuing need to support the warfighter and IC - (a) tensions on the Korean peninsula, (b) primitative IEDs a challenge in Afghanistan, (c) cyber command, (d)another Georgian smuggling event; and (3) Countering terrorisms on US soil - (a) toner cartridge bomb, (b) times square bomb, (c) christmas tree bomb. Joint Technical Operations Team (JTOT)more » and Accident Response Group (ARG) elements deployed to two East Coast locations in November to work a multi-weapon scenario. LANL provided 70% of on-duty field and reconstitution teams for both Marble Challenge 11-01 and JD 11-01. There were a total of 14 deployments in FY10.« less

Development and destruction of the first state funded anti-smoking campaign in the USA.

PubMed

Tsoukalas, T H; Glantz, S A

2003-06-01

Minnesota was the first state in the USA to implement a large state funded tobacco control programme (in 1985). Despite evidence of effectiveness, it was dismantled in 1993. To describe and analyse how and why these events transpired and identify lessons for tobacco control advocates facing similar challenges in the 21st century. Case study based on previously secret tobacco industry documents, news reports, research reports, official documents, and interviews with health advocates and state government officials. Unable to defeat funding for this campaign in 1985, the tobacco industry organised groups which eliminated it later. Despite the programme's documented effectiveness, it was dismantled based on claims of fiscal crisis. These claims were not true; the real debate was what to do with the state's surplus. Health advocates failed to challenge the claim of fiscal crisis or mobilise public support for the programme. Simply quoting evidence that a tobacco control programme is effective does not ensure its continuing survival. Claims of fiscal crisis are an effective cover for tobacco industry efforts to dismantle successful programmes, particularly if health advocates accept these claims and fail to mobilise political pressure to defend the programme.

Johnson Space Center Research and Technology Report

NASA Technical Reports Server (NTRS)

Pido, Kelle; Davis, Henry L. (Technical Monitor)

1999-01-01

As the principle center for NASA's Human Exploration and Development of Space (HEDS) Enterprise, the Johnson Space Center (JSC) leads NASA's development of human spacecraft, human support systems, and human spacecraft operations. To implement this mission, JSC has focused on developing the infrastructure and partnerships that enable the technology development for future NASA programs. In our efforts to develop key technologies, we have found that collaborative relationships with private industry and academia strengthen our capabilities, infuse innovative ideas, and provide alternative applications for our development projects. The American public has entrusted NASA with the responsibility for space--technology development, and JSC is committed to the transfer of the technologies that we develop to the private sector for further development and application. It is our belief that commercialization of NASA technologies benefits both American industry and NASA through technology innovation and continued partnering. To this end, we present the 1998-1999 JSC Research and Technology Report. As your guide to the current JSC technologies, this report showcases the projects in work at JSC that may be of interest to U.S. industry, academia, and other government agencies (federal, state, and local). For each project, potential alternative uses and commercial applications are described.

Development and destruction of the first state funded anti-smoking campaign in the USA

PubMed Central

Tsoukalas, T; Glantz, S

2003-01-01

Background: Minnesota was the first state in the USA to implement a large state funded tobacco control programme (in 1985). Despite evidence of effectiveness, it was dismantled in 1993. Objective: To describe and analyse how and why these events transpired and identify lessons for tobacco control advocates facing similar challenges in the 21st century. Design: Case study based on previously secret tobacco industry documents, news reports, research reports, official documents, and interviews with health advocates and state government officials. Results: Unable to defeat funding for this campaign in 1985, the tobacco industry organised groups which eliminated it later. Despite the programme's documented effectiveness, it was dismantled based on claims of fiscal crisis. These claims were not true; the real debate was what to do with the state's surplus. Health advocates failed to challenge the claim of fiscal crisis or mobilise public support for the programme. Conclusions: Simply quoting evidence that a tobacco control programme is effective does not ensure its continuing survival. Claims of fiscal crisis are an effective cover for tobacco industry efforts to dismantle successful programmes, particularly if health advocates accept these claims and fail to mobilise political pressure to defend the programme. PMID:12773734

Galvanic Liquid Applied Coating System For Protection of Embedded Steel Surfaces from Corrosion

NASA Technical Reports Server (NTRS)

Curran, Joseph; Curran, Jerome; Voska, N. (Technical Monitor)

2002-01-01

Corrosion of reinforcing steel in concrete is an insidious problem facing Kennedy Space Center (KSC), other Government Agencies, and the general public. These problems include KSC launch support structures, highway bridge infrastructure, and building structures such as condominium balconies. Due to these problems, the development of a Galvanic Liquid Applied Coating System would be a breakthrough technology having great commercial value for the following industries: Transportation, Infrastructure, Marine Infrastructure, Civil Engineering, and the Construction Industry. This sacrificial coating system consists of a paint matrix that may include metallic components, conducting agents, and moisture attractors. Similar systems have been used in the past with varying degrees of success. These systems have no proven history of effectiveness over the long term. In addition, these types of systems have had limited success overcoming the initial resistance between the concrete/coating interface. The coating developed at KSC incorporates methods proven to overcome the barriers that previous systems could not achieve. Successful development and continued optimization of this breakthrough system would produce great interest in NASA/KSC for corrosion engineering technology and problem solutions. Commercial patents on this technology would enhance KSC's ability to attract industry partners for similar corrosion control applications.

The Risk Implications of Globalisation: An Exploratory Analysis of 105 Major Industrial Incidents (1971-2010).

PubMed

Beck, Matthias

2016-03-10

This paper revisits work on the socio-political amplification of risk, which predicts that those living in developing countries are exposed to greater risk than residents of developed nations. This prediction contrasts with the neoliberal expectation that market driven improvements in working conditions within industrialising/developing nations will lead to global convergence of hazard exposure levels. It also contradicts the assumption of risk society theorists that there will be an ubiquitous increase in risk exposure across the globe, which will primarily affect technically more advanced countries. Reviewing qualitative evidence on the impact of structural adjustment reforms in industrialising countries, the export of waste and hazardous waste recycling to these countries and new patterns of domestic industrialisation, the paper suggests that workers in industrialising countries continue to face far greater levels of hazard exposure than those of developed countries. This view is confirmed when a data set including 105 major multi-fatality industrial disasters from 1971 to 2000 is examined. The paper concludes that there is empirical support for the predictions of socio-political amplification of risk theory, which finds clear expression in the data in a consistent pattern of significantly greater fatality rates per industrial incident in industrialising/developing countries.

The oil and gas industry of coastal Louisiana and its effects on land use and other socioeconomic patterns

USGS Publications Warehouse

Davis, Donald W.; Place, John L.

1983-01-01

Louisiana's coastal wetlands, alone with their well-drained urbanized strips, have been significantly affected by the oil and gas industry. Onshore, more than 6,300 exploratory wells and more than 21,000 development wells were drilled in Louisiana's eight southernmost parishes between 1937 and 1977. Nearly all those wells were in wetlands or inland water bodies. The wetlands, totaling more than 2 million hectares (ha), extend inland to roughly latitude 30? N, and are about 15 percent forested swamp and 85 percent nonforested marsh. Inland waters within the Louisiana coastal zone total more than 1 million ha. Nearly all these waters are quite shallow. More than 235,000 ha of this coastal area is used for major activities associated with the extraction of oil and gas. Production in the eight southern parishes peaked in 1970 to 120 million m3 of oil and 172 billion m 3 of gas. Connecting extensive onshore fields--and also servicing offshore fields--are intricate networks of canals for pipelines and maritime traffic related to the oil and gas industry. Offshore, more than 2,400 drilling and production platforms had been installed by May of 1981. Oil production from wells in both Federal and State waters off Louisiana peaked at 71 million m3 in 1972. Offshore gas production continues to increase, with 131 billion m3, in 1979. Since the early 1950's southern Louisiana's population has shifted from remote rural areas in the marshes to the more densely settled areas on the natural levees and beach ridges where employment is available in oil-field support industries and businesses. In 1975, in the 14 primary settlement clusters within the coastal wetlands, more than 3,600 advertised business activities were connected directly to the oil and gas industry. This compares to about 1,200 such activities in 1955, at the start of offshore development. These businesses are listed as water transportation, transportation equipment, pipelines, chemicals, special trade contractors, and petroleum refining, as well as actual oil and gas extraction. Area measurements of urban land uses reveal a major concentration of industry and transportation facilities along the navigable waterways. Ship and rig construction are important activities; of 148 fixed drilling platforms under construction in the United States in March 1981, 94 were being built in Louisiana to be barged out into the Gulf of Mexico and beyond. Of the 122 petroleum-industry support boats being built in the United States in 1976, 82 were in Louisiana shipyards; the worldwide total was estimated to be only about 200. In 1980, the Nation's marine con- tractors were building 129 logistic support vessels. Louisiana-based firms had 98 vessels under construction.

PREVALENCE OF INDUSTRY SUPPORT AND ITS RELATIONSHIP TO RESEARCH INTEGRITY

PubMed Central

Tereskerz, Patricia M.; Hamric, Ann B.; Guterbock, Thomas M.; Moreno, Jonathan D.

2009-01-01

Most U.S. clinical trials are funded by industry. Opportunities exist for sponsors to influence research in ways that jeopardize research objectivity. The purpose of this study was to survey U.S. medical school faculty to assess financial arrangements between investigators and industry to learn about investigators’ first hand knowledge of the effects of industry sponsorship on research. Here we show first-hand knowledge that compromises occurred in: research participants’ well-being (9%), research initiatives (35%), publication of results (28%), interpretation of research data (25%), and scientific advancement (20%) because of industry support. Financial relationships with industry were prevalent and considered important to conducting respondents’ research. PMID:19353387

Advanced Industrial Materials (AIM) Program annual progress report, FY 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-05-01

The Advanced Industrial Materials (AIM) Program is a part of the Office of Industrial Technologies (OIT), Energy Efficiency and Renewable Energy, US Department of Energy (DOE). The mission of AIM is to support development and commercialization of new or improved materials to improve energy efficiency, productivity, product quality, and reduced waste in the major process industries. OIT has embarked on a fundamentally new way of working with industries--the Industries of the Future (IOF) strategy--concentrating on the major process industries that consume about 90% of the energy and generate about 90% of the waste in the industrial sector. These are themore » aluminum, chemical, forest products, glass, metalcasting, and steel industries. OIT has encouraged and assisted these industries in developing visions of what they will be like 20 or 30 years into the future, defining the drivers, technology needs, and barriers to realization of their visions. These visions provide a framework for development of technology roadmaps and implementation plans, some of which have been completed. The AIM Program supports IOF by conducting research and development on materials to solve problems identified in the roadmaps. This is done by National Laboratory/industry/university teams with the facilities and expertise needed to develop new and improved materials. Each project in the AIM Program has active industrial participation and support.« less

iMusic: Living and Working as Musicians in Digital Capitalism

ERIC Educational Resources Information Center

Sargent, Carey Lynn

2010-01-01

In the midst of overall decline in the United States economy, information and communication industries continued to grow in 2008, accounting for 30% of the increase in the nation's GDP. Creative and copyright-based industries constitute a significant portion of this industry. The anomaly of growth in digital culture industries amidst overall…

Partnership with Industry: Film Production Technology.

ERIC Educational Resources Information Center

Rietveld, Richard; And Others

The 1988 final report of a task force from the Florida Postsecondary Education Planning Commission stated that in order to ensure continued growth of the motion picture film industry in the state, the postsecondary community must provide a well-trained and competent work force adept in all aspects of the industry. The film industry is a growing…

29 CFR 510.22 - Industries eligible for minimum wage phase-in.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Industries eligible for minimum wage phase-in. 510.22 Section 510.22 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR... ACT IN PUERTO RICO Classification of Industries § 510.22 Industries eligible for minimum wage phase-in...

15 CFR 730.9 - Organization of the Bureau of Industry and Security.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 15 Commerce and Foreign Trade 2 2013-01-01 2013-01-01 false Organization of the Bureau of Industry... Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE EXPORT ADMINISTRATION REGULATIONS GENERAL INFORMATION § 730.9 Organization of the Bureau of Industry and Security. The head of the...

15 CFR 730.9 - Organization of the Bureau of Industry and Security.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 15 Commerce and Foreign Trade 2 2014-01-01 2014-01-01 false Organization of the Bureau of Industry... Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE EXPORT ADMINISTRATION REGULATIONS GENERAL INFORMATION § 730.9 Organization of the Bureau of Industry and Security. The head of the...

15 CFR 730.9 - Organization of the Bureau of Industry and Security.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 15 Commerce and Foreign Trade 2 2012-01-01 2012-01-01 false Organization of the Bureau of Industry... Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE EXPORT ADMINISTRATION REGULATIONS GENERAL INFORMATION § 730.9 Organization of the Bureau of Industry and Security. The head of the...

27 CFR 8.54 - Criteria for determining retailer independence.

Code of Federal Regulations, 2010 CFR

2010-04-01

... purchase or the quantity in which to purchase them for sale to consumers. (b) The industry member obligates... has a continuing obligation to purchase or otherwise promote the industry member's product. (d) The... purchase of the industry member's products. (e) The practice involves the industry member in the day-to-day...

Exact and Approximate Solutions for Transient Squeezing Flow

NASA Astrophysics Data System (ADS)

Lang, Ji; Santhanam, Sridhar; Wu, Qianhong

2017-11-01

In this paper, we report two novel theoretical approaches to examine a fast-developing flow in a thin fluid gap, which is widely observed in industrial applications and biological systems. The problem is featured by a very small Reynolds number and Strouhal number, making the fluid convective acceleration is negligible, while its local acceleration is not. We have developed an exact solution for this problem which shows that the flow starts with an inviscid limit when the viscous effect has no time to appear, and is followed by a subsequent developing flow, in which the viscous effect continues to penetrate into the entire fluid gap. An approximate solution is also developed using a boundary layer integral method. This solution precisely captures the general behavior of the transient fluid flow process, and agrees very well with the exact solution. We also performed numerical simulation using Ansys-CFX. Excellent agreement between the analytical and the numerical solutions is obtained, indicating the validity of the analytical approaches. The study presented herein fills the gap in the literature, and will have a broad impact in industrial and biomedical applications. This work is supported by National Science Foundation CBET Fluid Dynamics Program under Award #1511096, and supported by the Seed Grant from The Villanova Center for the Advancement of Sustainability in Engineering (VCASE).

Policies to keep and expand the option of concentrating solar power for dispatchable renewable electricity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lilliestam, Johan; Barradi, Touria; Caldes, Natalia

Concentrating solar power (CSP) is one of the few renewable electricity technologies that can offer dispatchable electricity at large scale. Thus, it may play an important role in the future, especially to balance fluctuating sources in increasingly renewables-based power systems. Today, its costs are higher than those of PV and wind power and, as most countries do not support CSP, deployment is slow. Unless the expansion gains pace and costs decrease, the industry may stagnate or collapse, and an important technology for climate change mitigation has been lost. Keeping CSP as a maturing technology for dispatchable renewable power thus requiresmore » measures to improve its short-term economic attractiveness and to continue reducing costs in the longer term. We suggest a set of three policy instruments - feed-in tariffs or auctions reflecting the value of dispatchable CSP, and not merely its cost; risk coverage support for innovative designs; and demonstration projects - to be deployed, in regions where CSP has a potentially large role to play. This could provide the CSP industry with a balance of attractive profits and competitive pressure, the incentive to expand CSP while also reducing its costs, making it ready for broad-scale deployment when it is needed.« less

Policies to keep and expand the option of concentrating solar power for dispatchable renewable electricity

DOE PAGES

Lilliestam, Johan; Barradi, Touria; Caldes, Natalia; ...

2018-02-16

Concentrating solar power (CSP) is one of the few renewable electricity technologies that can offer dispatchable electricity at large scale. Thus, it may play an important role in the future, especially to balance fluctuating sources in increasingly renewables-based power systems. Today, its costs are higher than those of PV and wind power and, as most countries do not support CSP, deployment is slow. Unless the expansion gains pace and costs decrease, the industry may stagnate or collapse, and an important technology for climate change mitigation has been lost. Keeping CSP as a maturing technology for dispatchable renewable power thus requiresmore » measures to improve its short-term economic attractiveness and to continue reducing costs in the longer term. We suggest a set of three policy instruments - feed-in tariffs or auctions reflecting the value of dispatchable CSP, and not merely its cost; risk coverage support for innovative designs; and demonstration projects - to be deployed, in regions where CSP has a potentially large role to play. This could provide the CSP industry with a balance of attractive profits and competitive pressure, the incentive to expand CSP while also reducing its costs, making it ready for broad-scale deployment when it is needed.« less

Taint: an examination of the lived experiences of stigma and its lingering effects for eight sex industry experts.

PubMed

Bowen, Raven; Bungay, Vicky

2016-01-01

As part of a larger study examining the effects of the design of the off-street sex industry on sex worker's health and safety practices, eight sex work experts who had experience as sex workers and as advocates and service providers were interviewed to garner their community engagement expertise in shaping the research. During narrative interviews, these experts discussed how stigma influenced their personal lives and their social justice work among sex workers. Their insights into stigma are unique to the literature because our experts simultaneously confronted direct instances of stigma that were a part of their personal and professional lives, sometimes concealing their sex work histories during the course of their professional support and advocacy work. As a result of this concealment, and because of how sex workers are sometimes mistreated, experts experienced stigma vicariously (indirectly) when their own sex work histories were not apparent. As a result of these experiences, participants became proficient at managing discrediting information about themselves when in the presence of those they mistrusted. They supported sex workers through stigmatising ordeals by using knowledge gained from these intersecting direct and vicarious experiences stigma, continuously building capacity within themselves and among other sex workers to resist stigma.

Moving from Student to Professional: Industry Mentors and Academic Internship Coordinators Supporting Intern Learning in the Workplace

ERIC Educational Resources Information Center

Kramer-Simpson, Elisabeth

2018-01-01

This article offers empirical data to explore ways that both industry mentors and academic internship coordinators support student interns in ways that optimize the workplace experience. Rich description of qualitative data from case studies and interviews shows that to optimize the internship, both the industry mentor and the academic internship…

RE: Request for Correction, Technical Support Document, Greenhouse Gas Emissions Reporting from the Petroleum and Natural Gas Industry

EPA Pesticide Factsheets

The Industrial Energy Consumers of America (IECA) joins the U.S. Chamber of Commerce in its request for correction of information developed by the Environmental Protection Agency (EPA) in a background technical support document titled Greenhouse Gas Emissions Reporting from the Petroleum and Natural Gas Industry

Methodological Quality of Meta-Analyses: Matched-Pairs Comparison over Time and between Industry-Sponsored and Academic-Sponsored Reports

ERIC Educational Resources Information Center

Lane, Peter W.; Higgins, Julian P. T.; Anagnostelis, Betsy; Anzures-Cabrera, Judith; Baker, Nigel F.; Cappelleri, Joseph C.; Haughie, Scott; Hollis, Sally; Lewis, Steff C.; Moneuse, Patrick; Whitehead, Anne

2013-01-01

Context: Meta-analyses are regularly used to inform healthcare decisions. Concerns have been expressed about the quality of meta-analyses and, in particular, about those supported by the pharmaceutical industry. Objective: The objective of this study is to compare the quality of pharmaceutical-industry-supported meta-analyses with academic…

MATWIN: bridging the gap between academic research and industry.

PubMed

Reiffers, Josy; Robert, Lucia

2015-09-16

MATWIN (Maturation and Accelerating Translation With INdustry) is part of the nationwide effort to support cancer innovation. This unique program is willing to support innovative research projects providing tools, resources, and staff dedicated to project leaders wishing to optimize the industrial attractiveness of their project. The overall objective is clear: fight cancer always more effectively.

Cyberinfrastructure: empowering a "third way" in biomedical research.

PubMed

Buetow, Kenneth H

2005-05-06

Biomedicine has experienced explosive growth, fueled in parts by the substantial increase of government support, continued development of the biotechnology industry, and the increasing adoption of molecular-based medicine. At its core, it is composed of fiercely independent, innovative, entrepreneurial individuals, organizations, and institutions. The field has developed unprecedented capacity to characterize biologic systems at their most fundamental levels with the use of tools and technologies almost unimaginable a generation ago. Biomedicine is at the precipice of unlocking the very essence of biologic life and enabling a new generation of medicine. Development and deployment of cyberinfrastructure may prove to be on the critical path to obtaining these goals.

Where does the insurance industry stand on health reform today?

PubMed

Bodaken, Bruce G

2008-01-01

With another national health care debate on the horizon, many assume that health plans will present a major source of opposition to universal coverage and other reforms. But a closer look reveals signs of change. Some plans continue their reflexive opposition to increasing government's role in health care; other plans have stepped forward to advocate meaningful reform. Experience in Massachusetts, California, Minnesota, and elsewhere suggests a clear lesson for policymakers. Sensible proposals and a genuine commitment to cooperation can not only neutralize opposition from a potentially powerful opponent, but can actually bring health plans on board to support coverage mandates, guaranteed issue, and other reforms.

Transcending functional boundaries: the cultural, strategic, and tactical domains of marketing.

PubMed

Rapert, M I; Babakus, E; Olson, J

1997-01-01

While debate in the health care literature continues with respect to the role of marketing, many industries are adopting a broadened perspective which recognizes the comprehensive role which marketing may assume at a variety of levels within the organization: marketing as culture, marketing as strategy, and marketing as tactics. A national study of general service hospitals suggests that, in many hospitals, the marketing function is indeed transcending its functional boundaries through enculturation of a marketing orientation, involvement in the strategic process of the organization, and expansion of tactical marketing activities. Hospitals which adopt and support this broadened role of marketing are witnessing a positive effect on performance.

ALVA: A Successful Program for Increasing the Number of Minority Undergraduates who Earn Engineering Degrees

PubMed Central

Peterson, Lisa; Pinkham, Scott; Jordan, Cathryne

2010-01-01

A highly successful minority outreach and support program for incoming college freshmen in engineering is described. The University of Washington has been running ALVA (Alliances for Learning and Vision for underrepresented Americans) for 11 years and continuously tracks its participants. Partners in ALVA come from the government, education, and industry. This program targets talented underrepresented minority students and addresses four major hurdles that face minority students in engineering: lack of vision of themselves as an engineer, finances, community, and academic preparation. We will present ALVA as a model that can be duplicated at other colleges and universities. PMID:25242894

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moyer, Bruce A.

The North American industry has employed major solvent-extraction processes to support a wide range of separations including but not limited to chemical, metallurgical, nuclear, biochemical, pharmaceutical, and petroleum applications. The knowledge enabling these separations has been obtained through fundamental studies in academe, government and industry. The International Solvent Extraction Conferences have been and continue to be a major gathering of scientists, engineers, operators, and vendors from around the world, who present new findings since the last meeting, exchange ideas, make business contacts, and conduct collegial discussions. The ISEC 2008 program emphasizes fundamentals to industrial applications of solvent extraction, particularly howmore » this broad spectrum of activities is interconnected and has led to the implementation of novel processes. The oral and poster sessions have been organized into seven topics: Fundamentals; Novel Reagents, Materials and Techniques; Nuclear Fuel Reprocessing; Hydrometallurgy and Metals Extraction; Analytical and Preparative Applications; Biotechnology, Pharmaceuticals, Life-Science Products, and Organic Products; and Process Chemistry and Engineering. Over 350 abstracts were received, resulting in more than 260 manuscripts published in these proceedings. Five outstanding plenary presentations have been identified, with five parallel sessions for oral presentations and posters. In recognition of the major role solvent extraction (SX) plays in the hydrometallurgical and nuclear industries, these proceedings begin with sections focusing on hydrometallurgy, process chemistry, and engineering. More fundamental topics follow, including sections on novel reagents, materials, and techniques, featuring novel applications in analytical and biotechnology areas. Despite the diversity of topics and ideas represented, however, the primary focus of the ISEC community continues to be metals extraction. Four papers from these proceedings have been entered already in INIS in the form of individual reports. Among the remaining papers, 60 have been selected from the following sessions: Plenary Lectures, Hydrometallurgy and Metals Extraction, Nuclear Fuel Reprocessing, Analytical and Preparative Applications, Fundamentals, and Novel Reagents, Materials, and Techniques.« less

A project to transfer technology from NASA centers in support of industrial innovation in the midwest

NASA Technical Reports Server (NTRS)

Barr, B. G.

1986-01-01

A technology transfer program utilizing graduate students in mechanical engineering at the University of Kansas was initiated in early 1981. The objective of the program was to encourage industrial innovation in the Midwest through improved industry/university cooperation and the utilization of NASA technology. A related and important aspect of the program was the improvement of graduate engineering education through the involvement of students in the identification and accomplishment of technological objectives in cooperation with scientists at NASA centers and engineers in industry. The pilot NASA/University Industrial Innovation Program was an outstanding success based on its ability to: attract top graduate students; secure industry support; and stimulate industry/university cooperation leading to enhanced university capability and utilization of advanced technology by industry.

Cooperation between scientists, NGOs and industry in support of sustainable fisheries: the South African hake Merluccius spp. trawl fishery experience.

PubMed

Field, J G; Attwood, C G; Jarre, A; Sink, K; Atkinson, L J; Petersen, S

2013-10-01

This paper examines the increasingly close interaction between natural and social scientists, non-governmental organizations (NGO) and industry, in pursuit of responsible ecosystem-based management of fisheries. South Africa has committed to implementing an ecosystem approach to fisheries management. Management advice stems from multi-stakeholder representation on government-led scientific and management working groups. In the hake Merluccius capensis and Merluccius paradoxus fishery, the primary management measure is an annual total allowable catch (TAC), the level of which is calculated using a management procedure (MP) that is revised approximately every 4 years. Revision of the MP is a consultative process involving most stakeholders, and is based on simulation modelling of projected probable scenarios of resource and fishery dynamics under various management options. NGOs, such as the Worldwide Fund for Nature in South Africa (WWF-SA), have played an important role in influencing consumers, the fishing industry and government to develop responsible fishing practices that minimize damage to marine ecosystems. Cooperation between industry, government and scientists has helped to improve sustainability and facilitated the meeting of market-based incentives for more responsible fisheries. Research includes ecosystem modelling, spatial analysis and ecosystem risk assessment with increasing research focus on social and economic aspects of the fishery. A four-year cooperative experiment to quantify the effect of trawling on benthic community structure is being planned. The food requirements of top predators still need to be included in the TAC-setting formulae and more social and economic research is needed. This paper also demonstrates how NGO initiatives such as Marine Stewardship Council certification and the Southern African Sustainable Seafood Initiative, a traffic light system of classifying seafood for consumers, have contributed to responsible fishing practices, increased ecosystem research and public awareness. This fishery appears to have a good future, provided that the monitoring, control and surveillance systems continue to function, TACs remain within ecologically sustainable limits and the effective collaboration between government, industry, scientists and NGOs continues to drive positive change. © 2013 The Authors. Journal of Fish Biology © 2013 The Fisheries Society of the British Isles.

7 CFR 1220.112 - Industry information.

Code of Federal Regulations, 2010 CFR

2010-01-01

... markets, new marketing strategies, or increased efficiency for the soybean industry, and activities to... 7 Agriculture 10 2010-01-01 2010-01-01 false Industry information. 1220.112 Section 1220.112 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING...

7 CFR 1215.8 - Industry information.

Code of Federal Regulations, 2010 CFR

2010-01-01

... of new markets, new marketing strategies, or increased efficiency for the popcorn industry, or... 7 Agriculture 10 2010-01-01 2010-01-01 false Industry information. 1215.8 Section 1215.8 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING...

Impact of construction and remodeling markets on the U.S. secondary hardwood products industry

Treesearch

Matt Bumgardner; Urs Buehlmann; Al Schuler; Karen Koenig

2011-01-01

The housing correction that started in 2007 continues to run its course. Excessive inventory levels, limited credit availability, and record foreclosure rates continue to have an impact on U.S. housing markets. With inventories high and demand for new construction low, the U.S. hardwood industry's largest markets for appearance-grade products remain under pressure...

Development and Implementation of Degree Programs in Electric Drive Vehicle Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ng, Simon

2013-09-30

The Electric-drive Vehicle Engineering (EVE) MS degree and graduate certificate programs have been continuing to make good progress, thanks to the funding and the guidance from DOE grant management group, the support from our University and College administrations, and to valuable inputs and feedback from our Industrial Advisory Board as well as our project partners Macomb Community College and NextEnergy. Table 1 below lists originally proposed Statement of Project Objectives (SOPO), which have all been completed successfully. Our program and course enrollments continue to be good and increasing, as shown in later sections. Our graduating students continue to get goodmore » job offers from local EV-related companies. Following the top recommendation from our Industrial Advisory Board, we were fortunate enough to be accepted into the prestigious EcoCAR2 (http://www.ecocar2.org/) North America university design competition, and have been having some modest success with the competition. But most importantly, EcoCAR2 offers the most holistic educational environment for integrating real-world engineering and design with our EVE graduate curriculum. Such integrations include true real-world hands-on course projects based on EcoCAR2 related tasks for the students, and faculty curricular and course improvements based on lessons and best practices learned from EcoCAR2. We are in the third and last year of EcoCAR2, and we have already formed a core group of students in pursuit of EcoCAR”3”, for which the proposal is due in early December.« less

Effects of health and safety problem recognition on small business facility investment

PubMed Central

2013-01-01

Objectives This study involved a survey of the facility investment experiences, which was designed to recognize the importance of health and safety problems, and industrial accident prevention. Ultimately, we hope that small scale industries will create effective industrial accident prevention programs and facility investments. Methods An individual survey of businesses’ present physical conditions, recognition of the importance of the health and safety problems, and facility investment experiences for preventing industrial accidents was conducted. The survey involved 1,145 business operators or management workers in small business places with fewer than 50 workers in six industrial complexes. Results Regarding the importance of occupational health and safety problems (OHS), 54.1% said it was “very important”. Received technical and financial support, and industrial accidents that occurred during the past three years were recognized as highly important for OHS. In an investigation regarding facility investment experiences for industrial accident prevention, the largest factors were business size, greater numbers of industrial accidents, greater technical and financial support received, and greater recognition of the importance of the OHS. The related variables that decided facility investment for industry accident prevention in a logistic regression analysis were the experiences of business facilities where industrial accidents occurred during the past three years, received technical and financial support, and recognition of the OHS. Those considered very important were shown to be highly significant. Conclusions Recognition of health and safety issues was higher when small businesses had experienced industrial accidents or received financial support. The investment in industrial accidents was greater when health and safety issues were recognized as important. Therefore, the goal of small business health and safety projects is to prioritize health and safety issues in terms of business management and recognition of importance. Therefore, currently various support projects are being conducted. However, there are issues regarding the limitations of the target businesses and inadequacies in maintenance and follow-up. Overall, it is necessary to provide various incentives for onsite participation that can lead to increased recognition of health and safety issues and practical investments, while perfecting maintenance and follow up measures by thoroughly revising existing operating systems. PMID:24472180

Effects of health and safety problem recognition on small business facility investment.

PubMed

Park, Jisu; Jeong, Harin; Hong, Sujin; Park, Jong-Tae; Kim, Dae-Sung; Kim, Jongseo; Kim, Hae-Joon

2013-10-23

This study involved a survey of the facility investment experiences, which was designed to recognize the importance of health and safety problems, and industrial accident prevention. Ultimately, we hope that small scale industries will create effective industrial accident prevention programs and facility investments. An individual survey of businesses' present physical conditions, recognition of the importance of the health and safety problems, and facility investment experiences for preventing industrial accidents was conducted. The survey involved 1,145 business operators or management workers in small business places with fewer than 50 workers in six industrial complexes. Regarding the importance of occupational health and safety problems (OHS), 54.1% said it was "very important". Received technical and financial support, and industrial accidents that occurred during the past three years were recognized as highly important for OHS. In an investigation regarding facility investment experiences for industrial accident prevention, the largest factors were business size, greater numbers of industrial accidents, greater technical and financial support received, and greater recognition of the importance of the OHS. The related variables that decided facility investment for industry accident prevention in a logistic regression analysis were the experiences of business facilities where industrial accidents occurred during the past three years, received technical and financial support, and recognition of the OHS. Those considered very important were shown to be highly significant. Recognition of health and safety issues was higher when small businesses had experienced industrial accidents or received financial support. The investment in industrial accidents was greater when health and safety issues were recognized as important. Therefore, the goal of small business health and safety projects is to prioritize health and safety issues in terms of business management and recognition of importance. Therefore, currently various support projects are being conducted. However, there are issues regarding the limitations of the target businesses and inadequacies in maintenance and follow-up. Overall, it is necessary to provide various incentives for onsite participation that can lead to increased recognition of health and safety issues and practical investments, while perfecting maintenance and follow up measures by thoroughly revising existing operating systems.

Can public health reconcile profits and pandemics? An analysis of attitudes to commercial sector engagement in health policy and research

PubMed Central

Collin, Jeff; Hill, Sarah E.; Kandlik Eltanani, Mor; Plotnikova, Evgeniya; Ralston, Rob; Smith, Katherine E.

2017-01-01

Background Public health’s terms of engagement with unhealthy commodity industries (alcohol, tobacco and ultra-processed food and drinks) have become increasingly contested in policy and research. We sought to identify approaches that could attract consensus support within and across policy domains. Methods Using snowball sampling, we undertook an online survey of 335 health researchers, advocates and policymakers, in 40 countries, assessing responses to stated principles, claims and recommendations for engaging with unhealthy commodity industries in relation to key policy and research initiatives. Results Most respondents identified a fundamental conflict between industry interests and public health objectives for all three industries, with agreement greatest in relation to tobacco and weakest for food. This pattern was replicated across diverse questions regarding potential forms of engagement, including in rejecting voluntarism and partnership approaches to health policy. While awareness of tobacco industry tactics to influence policy and research was higher than for alcohol and food, most respondents rejected the view that the influence of the latter was less significant for public health. Proposals that health and research organisations should divest their funds attracted less support with respect to food, while restricting publication of industry-funded research in academic journals was the issue that most divided opinion. Respondents reported most difficulty in answering questions about the food industry. Conclusions The strong consensus around restricting interactions with the tobacco industry supports increased implementation of the WHO Framework Convention on Tobacco Control’s conflict of interest provisions. There is strong support for the extension of such practices to the alcohol industry, challenging current norms. More mixed responses indicate a need for greater clarity in defining the food industry, and for research analyzing links, similarities and differences across different types of unhealthy commodity producers. Partnership approaches to addressing non-communicable diseases seem incapable of attracting widespread support across public health, challenging practice in many contexts. PMID:28886049

Can public health reconcile profits and pandemics? An analysis of attitudes to commercial sector engagement in health policy and research.

PubMed

Collin, Jeff; Hill, Sarah E; Kandlik Eltanani, Mor; Plotnikova, Evgeniya; Ralston, Rob; Smith, Katherine E

2017-01-01

Public health's terms of engagement with unhealthy commodity industries (alcohol, tobacco and ultra-processed food and drinks) have become increasingly contested in policy and research. We sought to identify approaches that could attract consensus support within and across policy domains. Using snowball sampling, we undertook an online survey of 335 health researchers, advocates and policymakers, in 40 countries, assessing responses to stated principles, claims and recommendations for engaging with unhealthy commodity industries in relation to key policy and research initiatives. Most respondents identified a fundamental conflict between industry interests and public health objectives for all three industries, with agreement greatest in relation to tobacco and weakest for food. This pattern was replicated across diverse questions regarding potential forms of engagement, including in rejecting voluntarism and partnership approaches to health policy. While awareness of tobacco industry tactics to influence policy and research was higher than for alcohol and food, most respondents rejected the view that the influence of the latter was less significant for public health. Proposals that health and research organisations should divest their funds attracted less support with respect to food, while restricting publication of industry-funded research in academic journals was the issue that most divided opinion. Respondents reported most difficulty in answering questions about the food industry. The strong consensus around restricting interactions with the tobacco industry supports increased implementation of the WHO Framework Convention on Tobacco Control's conflict of interest provisions. There is strong support for the extension of such practices to the alcohol industry, challenging current norms. More mixed responses indicate a need for greater clarity in defining the food industry, and for research analyzing links, similarities and differences across different types of unhealthy commodity producers. Partnership approaches to addressing non-communicable diseases seem incapable of attracting widespread support across public health, challenging practice in many contexts.

FOREWORD: 9th International Conference on Compressors and their Systems

NASA Astrophysics Data System (ADS)

Kovacevic, Ahmed, Prof

2015-08-01

The 9th International Conference on Compressors and their Systems will be held in London from 5th - 9th September 2015, and as its Chairman, it is my pleasure to welcome you. This series of conferences started in 1999 organised by the Fluid Machinery Group of the Institution of Mechanical Engineers (IMechE) but since 2009 it has been managed by City University London in conjunction with the IMechE and the Institute of Refrigeration, both of which have been very proactive in promoting it. The Organising committee is grateful for their support and continued encouragement. This year, after rigorous reviewing, we have accepted over 80 technical papers for publication, the highest number in the conference history. On behalf of the organising committee I would like to thank the reviewers for their hard work and assistance. In addition to the main technical sessions, this year we have introduced a third day, specifically for Industry, to consider technology, business and market drivers on compressor developments. The traditional series of the short courses is this year continuing prior to the main event with the second short course/forum on Computational Fluid Dynamics in rotating positive displacement machines. I would like to extend my special thanks to our main sponsors, Holroyd PTG, Howden and Kapp Niels for their continuing support for the conference. With their generous contributions we have managed to keep the conference fees at the same level as in 2013, despite extending it to 3 days and holding it outside the University this year. The welcome reception on Sunday 6th September 2015 is dedicated to the celebration of the 20th anniversary of the Centre for Positive Displacement Compressors Technology which was formed at City University in 1995 with support from the Royal Academy of Engineering and Holroyd; its main aim being to assist British manufacturers of screw compressors. The Centre has since made a significant impact on the screw compressor world, far beyond the British Isles and continues to grow in its support for the screw machine industry. Recently renamed the Centre for Compressors Technology, its aim has been extended to help promote the development of all types of compressors and expanders. On this occasion, I must thank all those who have helped to make this event happen. Special thanks go to Louise Gordon, Emma Leaver and Sham Rane who did most of the organisation work and to all members of the organising committee and the international liaison committee. I would like to commend Dr Kristina Soldatova who joined the international liaison committee two years ago and extensively promoted the Conference in Russia which brought a large number of papers to the Conference from that part of the world. On behalf of the conference committee I wish you successful and enjoyable conference.

Financing nutrition services in a competitive market.

PubMed

Egan, M C; Kaufman, M

1985-02-01

Budget deficits and inflationary medical care costs threaten nutrition services, which until recently have been funded largely by federal, state, and local revenues. Nutritionists and dietitians responding to demands in the marketplace should develop innovative programs and pursue new sources for financing through the private sector, third-party payers, business/industry health promotion, and consumer fees for their services, as well as targeted federal, state, and locally funded food assistance, nutrition education, and health care programs. Trail-blazing dietitians are successfully offering their services in health maintenance organizations (HMOs), hospital or industry fitness programs, private practice, voluntary health agencies, and official agency programs. With the new federalism, nutritionists must articulate their role in comprehensive health care and market their services at the state and local levels in addition to the federal level. Nutrition services are defined to include assessment, planning, counseling, education, and referral to supportive agencies. Data management, managerial, and marketing skills must be developed for dietitians to compete effectively. Basic educational preparation and continuing education for practicing professionals must develop these competencies.

Catalytic hydroprocessing of heavy oil feedstocks

NASA Astrophysics Data System (ADS)

Okunev, A. G.; Parkhomchuk, E. V.; Lysikov, A. I.; Parunin, P. D.; Semeikina, V. S.; Parmon, V. N.

2015-09-01

A grave problem of modern oil refining industry is continuous deterioration of the produced oil quality, on the one hand, and increase in the demand for motor fuels, on the other hand. This necessitates processing of heavy oil feedstock with high contents of sulfur, nitrogen and metals and the atmospheric residue. This feedstock is converted to light oil products via hydrogenation processes catalyzed by transition metal compounds, first of all, cobalt- or nickel-promoted molybdenum and tungsten compounds. The processing involves desulfurization, denitrogenation and demetallization reactions as well as reactions converting heavy hydrocarbons to lighter fuel components. The review discusses the mechanisms of reactions involved in the heavy feedstock hydroprocessing, the presumed structure and state of the catalytically active components and methods for the formation of supports with the desired texture. Practically used and prospective approaches to catalytic upgrading of heavy oil feedstock as well as examples of industrial processing of bitumen and vacuum residues in the presence of catalysts are briefly discussed. The bibliography includes 140 references.

Biotechnology as the engine for the Knowledge-Based Bio-Economy.

PubMed

Aguilar, Alfredo; Bochereau, Laurent; Matthiessen, Line

2010-01-01

The European Commission has defined the Knowledge-Based Bio-Economy (KBBE) as the process of transforming life science knowledge into new, sustainable, eco-efficient and competitive products. The term "Bio-Economy" encompasses all industries and economic sectors that produce, manage and otherwise exploit biological resources and related services. Over the last decades biotechnologies have led to innovations in many agricultural, industrial, medical sectors and societal activities. Biotechnology will continue to be a major contributor to the Bio-Economy, playing an essential role in support of economic growth, employment, energy supply and a new generation of bio-products, and to maintain the standard of living. The paper reviews some of the main biotechnology-related research activities at European level. Beyond the 7th Framework Program for Research and Technological Development (FP7), several initiatives have been launched to better integrate FP7 with European national research activities, promote public-private partnerships and create better market and regulatory environments for stimulating innovation.

Explicitly searching for useful inventions: dynamic relatedness and the costs of connecting versus synthesizing

PubMed Central

2010-01-01

Inventions combine technological features. When features are barely related, burdensomely broad knowledge is required to identify the situations that they share. When features are overly related, burdensomely broad knowledge is required to identify the situations that distinguish them. Thus, according to my first hypothesis, when features are moderately related, the costs of connecting and costs of synthesizing are cumulatively minimized, and the most useful inventions emerge. I also hypothesize that continued experimentation with a specific set of features is likely to lead to the discovery of decreasingly useful inventions; the earlier-identified connections reflect the more common consumer situations. Covering data from all industries, the empirical analysis provides broad support for the first hypothesis. Regressions to test the second hypothesis are inconclusive when examining industry types individually. Yet, this study represents an exploratory investigation, and future research should test refined hypotheses with more sophisticated data, such as that found in literature-based discovery research. PMID:21297855

Readiness Assessment Towards Smart Manufacturing System for Tuna Processing Industry in Indonesia

NASA Astrophysics Data System (ADS)

Anggrahini, D.; Kurniati, N.; Karningsih, P. D.; Parenreng, S. M.; Syahroni, N.

2018-04-01

Marine product processing is one of the top priority clusters in the national development. Tuna, as a kind of deep ocean fishes, has the highest number of production that significantly increased throughout the years. Indonesia government encourages tuna processing industry, which are mostly dominated by small to medium enterprises, to grow continuously. Nowadays, manufacturers are facing substantial challenges in adopting modern system and technology that will lead a significant improvement through the internet of things (IoT). A smart factory transform integrated manufacturing process, in a high speed processing to respond customer needs. It has some positive impacts, such as increasing productivity, reducing set up time, shortening marketing and other support activities, hence the process is being more flexible and efficient. To implement smart manufacturing system, factories should know the readiness at any level of them, technology capability and strategy appropriateness. This exploratory study aims to identify the criterias, and develop an assessment tools to measure the level towards smart factory.

15 CFR 700.18 - Limitations on placing rated orders.

Code of Federal Regulations, 2012 CFR

2012-01-01

... transportation (Department of Transportation); (v) Water resources (Department of Defense/U.S. Army Corps of... (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE NATIONAL SECURITY INDUSTRIAL BASE REGULATIONS DEFENSE PRIORITIES AND ALLOCATIONS SYSTEM Industrial Priorities § 700.18 Limitations on placing...

15 CFR 700.18 - Limitations on placing rated orders.

Code of Federal Regulations, 2014 CFR

2014-01-01

... transportation (Department of Transportation); (v) Water resources (Department of Defense/U.S. Army Corps of... (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE NATIONAL SECURITY INDUSTRIAL BASE REGULATIONS DEFENSE PRIORITIES AND ALLOCATIONS SYSTEM Industrial Priorities § 700.18 Limitations on placing...

15 CFR 700.18 - Limitations on placing rated orders.

Code of Federal Regulations, 2013 CFR

2013-01-01

... transportation (Department of Transportation); (v) Water resources (Department of Defense/U.S. Army Corps of... (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE NATIONAL SECURITY INDUSTRIAL BASE REGULATIONS DEFENSE PRIORITIES AND ALLOCATIONS SYSTEM Industrial Priorities § 700.18 Limitations on placing...

29 CFR 697.1 - Industry definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR REGULATIONS INDUSTRIES IN... insurance, and insurance agents and brokers. (k) Ship maintenance. This industry is defined as all work..., women's, and children's suits, clothing and other products; hosiery; gloves and mittens; sweaters and...

29 CFR 901.2 - Policy of Commission.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Relating to Labor (Continued) CONSTRUCTION INDUSTRY COLLECTIVE BARGAINING COMMISSION POLICY STATEMENT ON... time recognizes the interests of each branch of the industry and preserves existing procedures that... the industry without such a procedure to establish its own procedures to facilitate the settlement of...

15 CFR 705.5 - Request or application for an investigation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... industry affected, including pertinent information regarding companies and their plants, locations... (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE NATIONAL SECURITY INDUSTRIAL BASE... shall be filed with the Director, Office of Technology Evaluation, Room H-1093, U.S. Department of...

40 CFR 98.463 - Calculating GHG emissions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Industrial Waste Landfills § 98.463 Calculating GHG emissions. (a) For each industrial waste landfill subject to the reporting requirements of this subpart... which emissions are calculated. Wx = Quantity of waste disposed in the industrial waste landfill in year...

Trends in computer hardware and software.

PubMed

Frankenfeld, F M

1993-04-01

Previously identified and current trends in the development of computer systems and in the use of computers for health care applications are reviewed. Trends identified in a 1982 article were increasing miniaturization and archival ability, increasing software costs, increasing software independence, user empowerment through new software technologies, shorter computer-system life cycles, and more rapid development and support of pharmaceutical services. Most of these trends continue today. Current trends in hardware and software include the increasing use of reduced instruction-set computing, migration to the UNIX operating system, the development of large software libraries, microprocessor-based smart terminals that allow remote validation of data, speech synthesis and recognition, application generators, fourth-generation languages, computer-aided software engineering, object-oriented technologies, and artificial intelligence. Current trends specific to pharmacy and hospitals are the withdrawal of vendors of hospital information systems from the pharmacy market, improved linkage of information systems within hospitals, and increased regulation by government. The computer industry and its products continue to undergo dynamic change. Software development continues to lag behind hardware, and its high cost is offsetting the savings provided by hardware.

Bioremoval of trivalent chromium using Bacillus biofilms through continuous flow reactor.

PubMed

Sundar, K; Sadiq, I Mohammed; Mukherjee, Amitava; Chandrasekaran, N

2011-11-30

Present study deals with the applicability of bacterial biofilms for the bioremoval of trivalent chromium from tannery effluents. A continuous flow reactor was designed for the development of biofilms on different substrates like glass beads, pebbles and coarse sand. The parameters for the continuous flow reactor were 20 ml/min flow rate at 30°C, pH4. Biofilm biomass on the substrates was in the following sequence: coarse sand>pebbles>glass beads (4.8 × 10(7), 4.5 × 10(7) and 3.5 × 10(5)CFU/cm(2)), which was confirmed by CLSM. Biofilms developed using consortium of Bacillus subtilis and Bacillus cereus on coarse sand had more surface area and was able to remove 98% of Cr(III), SEM-EDX proved 92.60% Cr(III) adsorption on biofilms supported by coarse sand. Utilization of Bacillus biofilms for effective bioremoval of Cr(III) from chrome tanning effluent could be a better option for tannery industry, especially during post chrome tanning operation. Copyright © 2011 Elsevier B.V. All rights reserved.

INDUSTRIAL ARTS--A STUDY OF INDUSTRY AND TECHNOLOGY FOR CONTEMPORARY MAN.

ERIC Educational Resources Information Center

MALEY, DONALD

AS AN IMPORTANT ELEMENT OF GENERAL EDUCATION, INDUSTRIAL ARTS MUST ENGAGE IN THOSE HUMAN ACTIVITIES WHICH CONTRIBUTE TO THE DEVELOPMENT OF SKILLS AND HABITS OF MIND WHICH WILL BE THE INSTRUMENTS OF CONTINUOUS CHANGE AND GROWTH ON THE PART OF THE INDIVIDUAL. THE UNIVERSITY OF MARYLAND CONCEPT OF INDUSTRIAL ARTS PROGRAMS RELATES TO THIS POSITION BY…

Improving Performance through HEI-Industry Engagements in the Built Environment

ERIC Educational Resources Information Center

Underwood, Jason; Williams, Aled; Thurairajah, Niraj

2009-01-01

The poor performance and inefficiencies of the construction industry are well recognized and documented. Through a variety of combined industry and government initiatives there has been a continual expression in the UK over the last decade of the urgent need to address the fragmented nature of the industry to improve its performance. A major…

Continuous processing and the applications of online tools in pharmaceutical product manufacture: developments and examples.

PubMed

Ooi, Shing Ming; Sarkar, Srimanta; van Varenbergh, Griet; Schoeters, Kris; Heng, Paul Wan Sia

2013-04-01

Continuous processing and production in pharmaceutical manufacturing has received increased attention in recent years mainly due to the industries' pressing needs for more efficient, cost-effective processes and production, as well as regulatory facilitation. To achieve optimum product quality, the traditional trial-and-error method for the optimization of different process and formulation parameters is expensive and time consuming. Real-time evaluation and the control of product quality using an online process analyzer in continuous processing can provide high-quality production with very high-throughput at low unit cost. This review focuses on continuous processing and the application of different real-time monitoring tools used in the pharmaceutical industry for continuous processing from powder to tablets.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Springmeyer, R R; Brugger, E; Cook, R

The Data group provides data analysis and visualization support to its customers. This consists primarily of the development and support of VisIt, a data analysis and visualization tool. Support ranges from answering questions about the tool, providing classes on how to use the tool, and performing data analysis and visualization for customers. The Information Management and Graphics Group supports and develops tools that enhance our ability to access, display, and understand large, complex data sets. Activities include applying visualization software for large scale data exploration; running video production labs on two networks; supporting graphics libraries and tools for end users;more » maintaining PowerWalls and assorted other displays; and developing software for searching and managing scientific data. Researchers in the Center for Applied Scientific Computing (CASC) work on various projects including the development of visualization techniques for large scale data exploration that are funded by the ASC program, among others. The researchers also have LDRD projects and collaborations with other lab researchers, academia, and industry. The IMG group is located in the Terascale Simulation Facility, home to Dawn, Atlas, BGL, and others, which includes both classified and unclassified visualization theaters, a visualization computer floor and deployment workshop, and video production labs. We continued to provide the traditional graphics group consulting and video production support. We maintained five PowerWalls and many other displays. We deployed a 576-node Opteron/IB cluster with 72 TB of memory providing a visualization production server on our classified network. We continue to support a 128-node Opteron/IB cluster providing a visualization production server for our unclassified systems and an older 256-node Opteron/IB cluster for the classified systems, as well as several smaller clusters to drive the PowerWalls. The visualization production systems includes NFS servers to provide dedicated storage for data analysis and visualization. The ASC projects have delivered new versions of visualization and scientific data management tools to end users and continue to refine them. VisIt had 4 releases during the past year, ending with VisIt 2.0. We released version 2.4 of Hopper, a Java application for managing and transferring files. This release included a graphical disk usage view which works on all types of connections and an aggregated copy feature for quickly transferring massive datasets quickly and efficiently to HPSS. We continue to use and develop Blockbuster and Telepath. Both the VisIt and IMG teams were engaged in a variety of movie production efforts during the past year in addition to the development tasks.« less

Lifetime evaluation of large format CMOS mixed signal infrared devices

NASA Astrophysics Data System (ADS)

Linder, A.; Glines, Eddie

2015-09-01

New large scale foundry processes continue to produce reliable products. These new large scale devices continue to use industry best practice to screen for failure mechanisms and validate their long lifetime. The Failure-in-Time analysis in conjunction with foundry qualification information can be used to evaluate large format device lifetimes. This analysis is a helpful tool when zero failure life tests are typical. The reliability of the device is estimated by applying the failure rate to the use conditions. JEDEC publications continue to be the industry accepted methods.

Structure, dynamics and movement patterns of the Australian pig industry.

PubMed

East, I J; Davis, J; Sergeant, E S G; Garner, M G

2014-03-01

To assess management practices and movement patterns that could influence the establishment and spread of exotic animal diseases (EAD) in pigs in Australia. A literature review of published information and a telephone survey of 370 pig producers owning >10 pigs who were registered with the PigPass national vendor declaration scheme. The movement and marketing patterns of Australian pig producers interviewed were divided into two groups based predominantly on the size of the herd. Major pig producers maintain closed herds, use artificial insemination and market direct to abattoirs. Smaller producers continue to purchase from saleyards and market to other farms, abattoirs and through saleyards in an apparently opportunistic fashion. The role of saleyards in the Australian pig industry continues to decline, with 92% of all pigs marketed directly from farm to abattoir. This survey described movement patterns that will assist in modelling the potential spread of EAD in the Australian pig industry. Continued movement towards vertical integration and closed herds in the Australian pig industry effectively divides the industry into a number of compartments that mitigate against the widespread dissemination of disease to farms adopting these practices. © 2014 Australian Veterinary Association.

Exzellenz in der Bildung für eine innovative Schweiz: Die Position des Wirtschaftsdachverbandes Chemie Pharma Biotech.

PubMed

Sennhauser, Marcel

2018-02-01

In Switzerland, the chemical, pharma and biotech industries make a substantial and sustained contribution to the Swiss economy. The company members of scienceindustries employ around 70,000 people in Switzerland. Since 1980 value creation and productivity have increased markedly. As a result the share of the Swiss gross value added has grown continually to reach 5.6% in 2015. Exports have also increased. Today the chemical, pharma and biotech industry contributes around 45% of all Swiss exports and is therefore the largest Swiss export industry. This article describes the key requirements from the viewpoint of the chemical-pharma industry in order that Switzerland can continue to compete as an innovative location in global competition.

Perspectives on the agrochemical industry and agrochemical discovery.

PubMed

Sparks, Thomas C; Lorsbach, Beth A

2017-04-01

Agrochemicals have been critical to the production of food and fiber, as well as the control of vectors of disease. The need for the discovery and development of new agrochemicals continues unabated due to the loss of existing products through the development of resistance, the desire for products with more favorable environmental and toxicological profiles, shifting pest spectra, and changing agricultural needs and practices. As presented in the associated analysis of the agrochemical industry, the rising costs and complexities of agrochemical discovery have, in part, led to increasing consolidation, especially in the USA and Europe. However, as demonstrated by the present analysis, the discovery of new agrochemicals continues in spite of the challenges. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Life science research in space - risks and chances for young scientists

NASA Astrophysics Data System (ADS)

Horn, Eberhard R.

2007-09-01

Research in Space is well established in most fields of Life Science, and the number of scientific publications in highly ranked journals increases steadily. However, this kind of research, in particular, fundamental research is coming more and more under pressure, funding decreases, and the discussion about its benefit for men increases continuously. The question is whether these conditions are favorable to the young generation of scientists who are not only interested in this field of research but who is urgently needed for a successful continuation of Life Science research in Space. There are pros and cons that are related to science specific factors as well as to factors specific for space research and space technologies. A young scientist also faces obstacles such as the ever- coming questions about the benefit/cost relation and the sustainability of fundamental research in Space. Continuation of a successful Life Science research in Space with a high level of competitive power should be based on three columns, (1) high- ranked state- of- art experiments, (2) motivated young scientists, and (3) scientific security after completion of projects to avoid loss of knowledge. This aim has to be supported by politicians who express clearly (political) support of Space exploration programs, by universities and private research institutions including industry. Establishment of a European FALL- BACK PLAN (FBP) for situations when flight opportunities are lacking is a way to support young Space scientists in their efforts to regain competitiveness with respect to normal scientists on the basis of first rate peer reviewed research projects that will stand on its own, i.e., transiently with no competition with ground- researchers.

Metrological Support in Technosphere Safety

NASA Astrophysics Data System (ADS)

Akhobadze, G. N.

2017-11-01

The principle of metrological support in technosphere safety is considered. It is based on the practical metrology. The theoretical aspects of accuracy and errors of the measuring instruments intended for diagnostics and control of the technosphere under the influence of factors harmful to human beings are presented. The necessity to choose measuring devices with high metrological characteristics according to the accuracy class and contact of sensitive elements with a medium under control is shown. The types of additional errors in measuring instruments that arise when they are affected by environmental influences are described. A specific example of the analyzers application to control industrial emissions and measure the oil and particulate matter in wastewater is shown; it allows assessing advantages and disadvantages of analyzers. Besides, the recommendations regarding the missing metrological characteristics of the instruments in use are provided. The technosphere continuous monitoring taking into account the metrological principles is expected to efficiently forecast the technosphere development and make appropriate decisions.

Informal leadership support: an often overlooked competitive advantage.

PubMed

Peters, L H; O'Connor, E J

2001-01-01

As environmental pressures mount, the advantage of using the same strategies and tactics employed by competitors continues to shrink. An alternative is adapting and applying answers successfully employed in other industries to health care organizations. Working with informal influence leaders to share your change management efforts represents one such example. Informal influence leaders offer an often-overlooked source of competitive advantage--they have already earned credibility and respect from others, who regularly look to them for guidance. When sharing their views, they significantly influence the acceptance or rejection of new initiatives. Influence leaders reach into every conversation, every meeting, and every decision made in an organization. The important question is whether they will exert their leadership in support or in opposition to changes you propose. By identifying influence leaders and inviting them to join a group to discuss change initiatives, physician executives can create a positive force for change.

ENABLING SMART MANUFACTURING TECHNOLOGIES FOR DECISION-MAKING SUPPORT

PubMed Central

Helu, Moneer; Libes, Don; Lubell, Joshua; Lyons, Kevin; Morris, KC

2017-01-01

Smart manufacturing combines advanced manufacturing capabilities and digital technologies throughout the product lifecycle. These technologies can provide decision-making support to manufacturers through improved monitoring, analysis, modeling, and simulation that generate more and better intelligence about manufacturing systems. However, challenges and barriers have impeded the adoption of smart manufacturing technologies. To begin to address this need, this paper defines requirements for data-driven decision making in manufacturing based on a generalized description of decision making. Using these requirements, we then focus on identifying key barriers that prevent the development and use of data-driven decision making in industry as well as examples of technologies and standards that have the potential to overcome these barriers. The goal of this research is to promote a common understanding among the manufacturing community that can enable standardization efforts and innovation needed to continue adoption and use of smart manufacturing technologies. PMID:28649678

[Public and private: insurance companies and medical care in Mexico].

PubMed

Tamez, S; Bodek, C; Eibenschutz, C

1995-01-01

During the late 70's and early 80's in Mexico, as in the rest of Latin-America, sanitary policies were directed to support the growth of the private sector of health care at the expense of the public sector. This work analyzes the evolution of the health insurance market as a part of the privatization process of health care. The analysis based on economic data, provides the political profile behind the privatization process as well as the changes in the relations between the State and the health sector. The central hypothesis is that the State promotes and supports the growth of the private market of medical care via a series of legal, fiscal and market procedures. It also discusses the State roll in the legal changes related to the national insurance activity. A comparative analysis is made about the evolution of the insurance industry in Argentina, Brazil, Chile and Mexico during the period 1986-1992, with a particular enfasis in the last country. One of the principal results is that the Premium/GNP and Premium/per capita, display a general growth in the 4 countries. This growth is faster for Mexico for each one) because the privatization process occurred only during the most recent years. For the 1984-1991 period in Mexico the direct premium as percentage of the GNP raised from 0.86% to 1.32%. If one focussed only in the insurance for health and accidents branches the rice goes form 8.84% in 1984 to 19.08% in 1991. This indicates that the insurance industry is one of the main targets of the privatization process of the health care system in Mexico. This is also shown by the State support to fast expansion of the big medical industrial complex of the country. Considering this situation in the continuity of the neoliberal model of Mexico, this will profound the inequity and inequality.

Pollution characterization of liquid waste of the factory complex Fertial (Arzew, Algeria).

PubMed

Redouane, Fares; Mourad, Lounis

2016-03-01

The industrial development in Algeria has made a worrying situation for all socioeconomic stakeholders. Indeed, this economic growth is marked in recent years by the establishment of factories and industrial plants that discharge liquid waste in marine shorelines. These releases could destabilize the environmental balance in the coming years, hence the need to support the processing of all sources of pollution. Remediation of such discharges requires several steps of identifying the various pollutants to their treatments. Therefore, the authors conducted this first work of characterization of industrial effluents generated by the mineral fertilizer factory complex Fertial (Arzew), and discussed the pollution load generated by this type of industry. This monitoring would establish a tool for reflection and decision support developed by a management system capable of ensuring effective and sustainable management of effluents from industrial activities of Fertial. The authors conducted this first work of characterization of industrial effluents generated by the mineral fertilizer factory complex Fertial (Arzew), and discussed the pollution load generated by this type of industry. This monitoring would establish a tool for reflection and decision support developed by a management system capable of ensuring effective and sustainable management of effluents from industrial activities of Fertial.

Parametric instabilities of rotor-support systems with application to industrial ventilators

NASA Technical Reports Server (NTRS)

Parszewski, Z.; Krodkiemski, T.; Marynowski, K.

1980-01-01

Rotor support systems interaction with parametric excitation is considered for both unequal principal shaft stiffness (generators) and offset disc rotors (ventilators). Instability regions and types of instability are computed in the first case, and parametric resonances in the second case. Computed and experimental results are compared for laboratory machine models. A field case study of parametric vibrations in industrial ventilators is reported. Computed parametric resonances are confirmed in field measurements, and some industrial failures are explained. Also the dynamic influence and gyroscopic effect of supporting structures are shown and computed.

Statewide Continuing Education Needs Analysis of New Hampshire Business, Industry, and Service Organizations. Executive Summary and Final Report.

ERIC Educational Resources Information Center

Miller, Tyson A.

New Hampshire employers, expecially large employers, see a significant need for continuing education for their employees, according to a survey of 16,000 business, industry, and service organizations in the state. Of the 1,883 employers (12%) who responded to the mailed questionnaire and the 68 employers who were interviewed, 84 percent would like…

Sweetwater, Texas Large N Experiment

NASA Astrophysics Data System (ADS)

Sumy, D. F.; Woodward, R.; Barklage, M.; Hollis, D.; Spriggs, N.; Gridley, J. M.; Parker, T.

2015-12-01

From 7 March to 30 April 2014, NodalSeismic, Nanometrics, and IRIS PASSCAL conducted a collaborative, spatially-dense seismic survey with several thousand nodal short-period geophones complemented by a backbone array of broadband sensors near Sweetwater, Texas. This pilot project demonstrates the efficacy of industry and academic partnerships, and leveraged a larger, commercial 3D survey to collect passive source seismic recordings to image the subsurface. This innovative deployment of a large-N mixed-mode array allows industry to explore array geometries and investigate the value of broadband recordings, while affording academics a dense wavefield imaging capability and an operational model for high volume instrument deployment. The broadband array consists of 25 continuously-recording stations from IRIS PASSCAL and Nanometrics, with an array design that maximized recording of horizontal-traveling seismic energy for surface wave analysis over the primary target area with sufficient offset for imaging objectives at depth. In addition, 2639 FairfieldNodal Zland nodes from NodalSeismic were deployed in three sub-arrays: the outlier, backbone, and active source arrays. The backbone array consisted of 292 nodes that covered the entire survey area, while the outlier array consisted of 25 continuously-recording nodes distributed at a ~3 km distance away from the survey perimeter. Both the backbone and outlier array provide valuable constraints for the passive source portion of the analysis. This project serves as a learning platform to develop best practices in the support of large-N arrays with joint industry and academic expertise. Here we investigate lessons learned from a facility perspective, and present examples of data from the various sensors and array geometries. We will explore first-order results from local and teleseismic earthquakes, and show visualizations of the data across the array. Data are archived at the IRIS DMC under stations codes XB and 1B.

EUFAR the unique portal for airborne research in Europe

NASA Astrophysics Data System (ADS)

Gérard, Elisabeth; Brown, Philip

2016-04-01

Created in 2000 and supported by the EU Framework Programmes since then, EUFAR was born out of the necessity to create a central network and access point for the airborne research community in Europe. With the aim to support researchers by granting them access to research infrastructures, not accessible in their home countries, EUFAR also provides technical support and training in the field of airborne research for the environmental and geo-sciences. Today, EUFAR2 (2014-2018) coordinates and facilitates transnational access to 18 instrumented aircraft and 3 remote-sensing instruments through the 13 operators who are part of EUFAR's current 24-partner European consortium. In addition, the current project supports networking and research activities focused on providing an enabling environment for and promoting airborne research. The EUFAR2 activities cover three objectives, supported by the internet website www.eufar.net: (I - Institutional) improvement of the access to the research infrastructures and development of the future fleet according to the strategic advisory committee (SAC) recommendations; (ii - Innovation) improvement of the scientific knowledge and promotion of innovating instruments, processes and services for the emergence of new industrial technologies, with an identification of industrial needs by the SAC; (iii - Service) optimisation and harmonisation of the use of the research infrastructures through the development of the community of young researches in airborne science, of the standards and protocols and of the airborne central database. With the launch of a brand new website (www.eufar.net) in mid-November 2015, EUFAR aims to improve user experience on the website, which serves as a source of information and a hub where users are able to collaborate, learn, share expertise and best practices, and apply for transnational access, and education and training funded opportunities within the network. With its newly designed eye-catching interface, the website offers easy navigation, and user friendly functionalities. New features also include a section on news and airborne research stories to keep users up-to-date on EUFAR's activities, a career section, photo galleries, and much more. By elaborating new solutions for the web portal, EUFAR continues to serve as an interactive and dynamic platform bringing together experts, early-stage researchers, operators, data users, industry and other stakeholders in the airborne research community. A main focus of the current project is the establishment of a sustainable legal structure for EUFAR. This is critical to ensuring the continuity of EUFAR and securing, at the least, partial financial independence from the European Commission who has been funding the project since its start. After carefully examining different legal forms relevant for EUFAR, the arguments are strongly in favour of establishing an International non-profit Association under the Belgian law (AISBL). Together with the implementation of an Open Access scheme by means of resource-sharing to support the mobility of personnel across countries envisaged in 2016, such a sustainable structure would contribute substantially toward broadening the user base of existing airborne research facilities in Europe and mobilising additional resources for this end. In essence, this would cement EUFAR's position as the key portal for airborne research in Europe.

Supporting a Diverse Community of Undergraduate Researchers in Satellite and Ground-Based Remote Sensing

NASA Astrophysics Data System (ADS)

Blake, R.; Liou-Mark, J.

2012-12-01

The U.S. remains in grave danger of losing its global competitive edge in STEM. To find solutions to this problem, the Obama Administration proposed two new national initiatives: the Educate to Innovate Initiative and the $100 million government/private industry initiative to train 100,000 STEM teachers and graduate 1 million additional STEM students over the next decade. To assist in ameliorating the national STEM plight, the New York City College of Technology has designed its NSF Research Experience for Undergraduate (REU) program in satellite and ground-based remote sensing to target underrepresented minority students. Since the inception of the program in 2008, a total of 45 undergraduate students of which 38 (84%) are considered underrepresented minorities in STEM have finished or are continuing with their research or are pursuing their STEM endeavors. The program is comprised of the three primary components. The first component, Structured Learning Environments: Preparation and Mentorship, provides the REU Scholars with the skill sets necessary for proficiency in satellite and ground-based remote sensing research. The students are offered mini-courses in Geographic Information Systems, MATLAB, and Remote Sensing. They also participate in workshops on the Ethics of Research. Each REU student is a member of a team that consists of faculty mentors, post doctorate/graduate students, and high school students. The second component, Student Support and Safety Nets, provides undergraduates a learning environment that supports them in becoming successful researchers. Special networking and Brown Bag sessions, and an annual picnic with research scientists are organized so that REU Scholars are provided with opportunities to expand their professional community. Graduate school support is provided by offering free Graduate Record Examination preparation courses and workshops on the graduate school application process. Additionally, students are supported by college counselors. Many of the students are first generation college students who often face issues that can impede their academic progress. The last component, Vision and Impetus for Advancement, allows REU Scholars to see themselves as STEM scientists and workforce professionals. Exposure trips provide students with an opportunity to meet scientists working in industry. Additionally, the students also present their research and participate at local, regional, and national conferences. Furthermore, since many of the students were never given the chance to visit STEM-focused industries and conferences. The program, therefore, helps to broaden their STEM experience. Of the 38 REU Scholars, 16%(6) of them are in graduate school in the STEM disciplines, 21%(8) of them have graduated and are in the STEM workforce, and 63%(24) of them continue to pursue their STEM degrees. Three of the students have won first place recognition for their research, and two of the students will be co-authors for two peer-review publications and one book chapter. Additionally, survey results show that 84% of the student participants now indicate interest in pursuing Master's degrees in STEM and 75% indicate interest in pursuing doctoral degrees in STEM. This program is supported by NSF REU grant #1062934.

The AGTSR consortium: An update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fant, D.B.; Golan, L.P.

1995-10-01

The Advanced Gas Turbine Systems Research (AGTSR) program is a collaborative University-Industry R&D Consortium that is managed and administered by the South Carolina Energy R&D Center. AGTSR is a nationwide consortium dedicated to advancing land-based gas turbine systems for improving future power generation capability. It directly supports the technology-research arm of the ATS program and targets industry-defined research needs in the areas of combustion, heat transfer, materials, aerodynamics, controls, alternative fuels, and advanced cycles. The consortium is organized to enhance U.S. competitiveness through close collaboration with universities, government, and industry at the R&D level. AGTSR is just finishing its thirdmore » year of operation and is sponsored by the U.S. DOE - Morgantown Energy Technology Center. The program is scheduled to continue past the year 2000. At present, there are 78 performing member universities representing 36 states, and six cost-sharing U.S. gas turbine corporations. Three RFP`s have been announced and the fourth RFP is expected to be released in December, 1995. There are 31 research subcontracts underway at performing member universities. AGTSR has also organized three workshops, two in combustion and one in heat transfer. A materials workshop is in planning and is scheduled for February, 1996. An industrial internship program was initiated this past summer, with one intern positioned at each of the sponsoring companies. The AGTSR consortium nurtures close industry-university-government collaboration to enhance synergism and the transition of research results, accelerate and promote evolutionary-revolutionary R&D, and strives to keep a prominent U.S. industry strong and on top well into the 21st century. This paper will present the objectives and benefits of the AGTSR program, progress achieved to date, and future planned activity in fiscal year 1996.« less

Critical elements in implementations of just-in-time management: empirical study of cement industry in Pakistan.

PubMed

Qureshi, Muhammad Imran; Iftikhar, Mehwish; Bhatti, Mansoor Nazir; Shams, Tauqeer; Zaman, Khalid

2013-01-01

In recent years, inventory management is continuous challenge for all organizations not only due to heavy cost associated with inventory holding, but also it has a great deal to do with the organizations production process. Cement industry is a growing sector of Pakistan's economy which is now facing problems in capacity utilization of their plants. This study attempts to identify the key strategies for successful implementation of just-in-time (JIT) management philosophy on the cement industry of Pakistan. The study uses survey responses from four hundred operations' managers of cement industry in order to know about the advantages and benefits that cement industry have experienced by Just in time (JIT) adoption. The results show that implementing the quality, product design, inventory management, supply chain and production plans embodied through the JIT philosophy which infect enhances cement industry competitiveness in Pakistan. JIT implementation increases performance by lower level of inventory, reduced operations & inventory costs was reduced eliminates wastage from the processes and reduced unnecessary production which is a big challenge for the manufacturer who are trying to maintain the continuous flow processes. JIT implementation is a vital manufacturing strategy that reaches capacity utilization and minimizes the rate of defect in continuous flow processes. The study emphasize the need for top management commitment in order to incorporate the necessary changes that need to take place in cement industry so that JIT implementation can take place in an effective manner.

Tobacco industry manipulation of data on and press coverage of the illicit tobacco trade in the UK

PubMed Central

Rowell, A; Evans-Reeves, K; Gilmore, A B

2014-01-01

Background In the UK, transnational tobacco companies (TTCs) have been arguing that levels of illicit trade are high and increasing and will rise further if standardised packaging is implemented. This paper examines trends in and accuracy of media reporting of, and industry data on, illicit tobacco in the UK. Methods Quantification of the volume, nature and quality of press articles citing industry data on illicit tobacco in UK newspapers from March 2008 to March 2013. Examination of published TTC data on illicit, including a comparison with independent data and of TTC reporting of Her Majesty's Revenue and Customs data on illicit. Results Media stories citing industry data on illicit tobacco began in June 2011, 2 months after the Tobacco Control Plan for England, which heralded standardised packaging, was published. The majority of data cited are based on industry Empty Pack Surveys for which no methodology is available. For almost all parts of the country where repeat data were cited in press stories, they indicated an increase, often substantial, in non-domestic/illicit cigarettes that is not supported by independent data. Similarly, national data from two published industry sources show a sudden large increase in non-domestic product between 2011 and 2012. Yet the methodology of one report changes over this period and the other provides no published methodology. In contrast, independent data show steady declines in non-domestic and illicit cigarette penetration from 2006 to 2012 and either a continued decline or small increase to 2013. Conclusions Industry claims that use of Non-UK Duty Paid/illicit cigarettes in the UK is sharply increasing are inconsistent with historical trends and recent independent data. TTCs are exaggerating the threat of illicit tobacco by commissioning surveys whose methodology and validity remain uncertain, planting misleading stories and misquoting government data. Industry data on levels of illicit should be treated with extreme caution. PMID:24614041

Opportunities and challenges for collaborative funding with industry

NASA Astrophysics Data System (ADS)

Thompson, J. F.

2014-12-01

The discovery and extraction of natural resources represents major challenges on both technical and socio-political fronts. Societal demand for commodities continues to increase as population, infrastructure, energy demands and standards of living increase. In parallel, society expects more efficient, cleaner and more sustainable practices. There are therefore multiple incentives for industry to invest in research and innovation to meet these fundamental goals. Natural resource companies fund research internally and externally but the focus, approach and level of funding varies considerably among sectors, companies and disciplines. The wide variety of philosophies creates difficulties for those who seek to work with industry. Most funding arrangement are built through extensive engagement, opportunities to leverage funds particularly in higher risk or less well defined areas (e.g., geoscience), and the attraction of meeting potential new high quality employees. Barriers to funding include unrealistic perceptions of confidentiality issues in industry, bureaucracy and unrealistic IP constraints in academia, and onerous overhead charges by universities that vastly exceed those charged by consulting and contract researchers. Academics and students can benefit immensely from productive research arrangements with industry, but understanding realistic expectations on both sides is critical. Although funding from industry may introduce constraints, some companies are willing to take a virtual hands-off approach in support of quality science. Selecting the appropriate researchers and methodology is important; it takes time for students to become effective and some problems are simply not suited to graduate research, or even academia. Some Governments play an enormous role in facilitating collaborative research with industry while others struggle to differentiate programs that encourage investment from those that unfairly subsidize industry. The traditional Government role in the provision of geoscientific data to serve society and underpin high risk exploration has diminished in many jurisdictions and new innovative partnerships and collaborative research and development approaches are required to fill these gaps and hence meet societal needs for commodities.

A qualitative inquiry of educational requirements of selected professions in the Oklahoma aerospace industry

NASA Astrophysics Data System (ADS)

Walker, Casey Jerry Kennon

Interview of incumbents of intellectual capital positions at Boeing. The aerospace industry is a dynamic industry that requires continual skill updates to keep up with advancements in technology and operational trends within the industry. The purpose of this study was to examine intellectual capital requirements of selected professional positions within the Boeing Company in Oklahoma. Data obtained through interviews was used to determine if educational skills gaps existed. The findings of the study can be used to develop an aerospace educational pipeline based on collaborative relationships between industry and higher education to facilitate educational and training programs. Three broad research questions were used to address and support the findings of this study related to educational background, career progression, and gaps. A purposive sample of 10 professional positions was selected for interview using an interview guide containing 18 questions. Data was analyzed using manual coding techniques. Findings and conclusions. The study found that minimum education requirements for selected professional positions consisted of a bachelor's degree. Although the majority of participants identified a business degree as optimal, several participants indicated that an education background from multiple disciplines would provide the greatest benefit. Data from interviews showed educational degrees were not specialized enough and skills required to perform job functions were obtained through direct on the job experience or through corporate training. Indications from participant responses showed employees with a thorough knowledge of government acronyms had a decided advantage over those that did not. Recommendations included: expanding the study to multiple organizations by conducting a survey; expanding industry and academic partnerships; establishing a structured educational pipeline to fill critical positions; creating broad aerospace curricula degree programs tailored to industry needs; incorporate additional capstone and internship opportunities to bridge classroom learning and experience; and establish an industry/academic liaison to develop internship opportunities.

29 CFR 525.15 - Industrial homework.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 3 2013-07-01 2013-07-01 false Industrial homework. 525.15 Section 525.15 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR REGULATIONS EMPLOYMENT OF WORKERS WITH DISABILITIES UNDER SPECIAL CERTIFICATES § 525.15 Industrial homework. (a) Where the...

29 CFR 525.15 - Industrial homework.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Industrial homework. 525.15 Section 525.15 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR REGULATIONS EMPLOYMENT OF WORKERS WITH DISABILITIES UNDER SPECIAL CERTIFICATES § 525.15 Industrial homework. (a) Where the...

29 CFR 525.15 - Industrial homework.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 3 2014-07-01 2014-07-01 false Industrial homework. 525.15 Section 525.15 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR REGULATIONS EMPLOYMENT OF WORKERS WITH DISABILITIES UNDER SPECIAL CERTIFICATES § 525.15 Industrial homework. (a) Where the...

29 CFR 525.15 - Industrial homework.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 3 2012-07-01 2012-07-01 false Industrial homework. 525.15 Section 525.15 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR REGULATIONS EMPLOYMENT OF WORKERS WITH DISABILITIES UNDER SPECIAL CERTIFICATES § 525.15 Industrial homework. (a) Where the...

7 CFR 1948.72 - Industry reports.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 13 2012-01-01 2012-01-01 false Industry reports. 1948.72 Section 1948.72 Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, RURAL BUSINESS-COOPERATIVE... § 1948.72 Industry reports. Any person regularly engaged in any coal or uranium development activity...

7 CFR 1948.72 - Industry reports.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 13 2010-01-01 2009-01-01 true Industry reports. 1948.72 Section 1948.72 Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, RURAL BUSINESS-COOPERATIVE... § 1948.72 Industry reports. Any person regularly engaged in any coal or uranium development activity...

7 CFR 900.42 - Industry assessments.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 8 2012-01-01 2012-01-01 false Industry assessments. 900.42 Section 900.42 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... Marketing Orders § 900.42 Industry assessments. If the Secretary determines it is necessary to improve or...

29 CFR 2530.200b-5 - Seasonal industries. [Reserved

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 9 2014-07-01 2014-07-01 false Seasonal industries. [Reserved] 2530.200b-5 Section 2530.200b-5 Labor Regulations Relating to Labor (Continued) EMPLOYEE BENEFITS SECURITY ADMINISTRATION... and General Provisions § 2530.200b-5 Seasonal industries. [Reserved] ...

7 CFR 900.42 - Industry assessments.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 8 2011-01-01 2011-01-01 false Industry assessments. 900.42 Section 900.42 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... Marketing Orders § 900.42 Industry assessments. If the Secretary determines it is necessary to improve or...

7 CFR 900.33 - Industry assessments.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 8 2011-01-01 2011-01-01 false Industry assessments. 900.33 Section 900.33 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... § 900.33 Industry assessments. If the Secretary determines it is necessary to improve or expedite an...

29 CFR 2530.200b-5 - Seasonal industries. [Reserved

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false Seasonal industries. [Reserved] 2530.200b-5 Section 2530.200b-5 Labor Regulations Relating to Labor (Continued) EMPLOYEE BENEFITS SECURITY ADMINISTRATION... and General Provisions § 2530.200b-5 Seasonal industries. [Reserved] ...

29 CFR 2530.200b-5 - Seasonal industries. [Reserved

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 9 2012-07-01 2012-07-01 false Seasonal industries. [Reserved] 2530.200b-5 Section 2530.200b-5 Labor Regulations Relating to Labor (Continued) EMPLOYEE BENEFITS SECURITY ADMINISTRATION... and General Provisions § 2530.200b-5 Seasonal industries. [Reserved] ...

29 CFR 2530.200b-5 - Seasonal industries. [Reserved

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 9 2013-07-01 2013-07-01 false Seasonal industries. [Reserved] 2530.200b-5 Section 2530.200b-5 Labor Regulations Relating to Labor (Continued) EMPLOYEE BENEFITS SECURITY ADMINISTRATION... and General Provisions § 2530.200b-5 Seasonal industries. [Reserved] ...

7 CFR 900.33 - Industry assessments.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 8 2010-01-01 2010-01-01 false Industry assessments. 900.33 Section 900.33 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... § 900.33 Industry assessments. If the Secretary determines it is necessary to improve or expedite an...

7 CFR 900.33 - Industry assessments.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 8 2014-01-01 2014-01-01 false Industry assessments. 900.33 Section 900.33 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING... § 900.33 Industry assessments. If the Secretary determines it is necessary to improve or expedite an...

7 CFR 900.42 - Industry assessments.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 8 2014-01-01 2014-01-01 false Industry assessments. 900.42 Section 900.42 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING... Marketing Orders § 900.42 Industry assessments. If the Secretary determines it is necessary to improve or...

7 CFR 900.42 - Industry assessments.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 8 2013-01-01 2013-01-01 false Industry assessments. 900.42 Section 900.42 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING... Marketing Orders § 900.42 Industry assessments. If the Secretary determines it is necessary to improve or...

7 CFR 1948.72 - Industry reports.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 13 2013-01-01 2013-01-01 false Industry reports. 1948.72 Section 1948.72 Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, RURAL BUSINESS-COOPERATIVE... § 1948.72 Industry reports. Any person regularly engaged in any coal or uranium development activity...

29 CFR 2530.200b-5 - Seasonal industries. [Reserved

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 9 2011-07-01 2011-07-01 false Seasonal industries. [Reserved] 2530.200b-5 Section 2530.200b-5 Labor Regulations Relating to Labor (Continued) EMPLOYEE BENEFITS SECURITY ADMINISTRATION... and General Provisions § 2530.200b-5 Seasonal industries. [Reserved] ...

7 CFR 1948.72 - Industry reports.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 13 2014-01-01 2013-01-01 true Industry reports. 1948.72 Section 1948.72 Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, RURAL BUSINESS-COOPERATIVE... § 1948.72 Industry reports. Any person regularly engaged in any coal or uranium development activity...

7 CFR 900.33 - Industry assessments.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 8 2013-01-01 2013-01-01 false Industry assessments. 900.33 Section 900.33 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING... § 900.33 Industry assessments. If the Secretary determines it is necessary to improve or expedite an...

7 CFR 900.33 - Industry assessments.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 8 2012-01-01 2012-01-01 false Industry assessments. 900.33 Section 900.33 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... § 900.33 Industry assessments. If the Secretary determines it is necessary to improve or expedite an...

7 CFR 1948.72 - Industry reports.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 13 2011-01-01 2009-01-01 true Industry reports. 1948.72 Section 1948.72 Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, RURAL BUSINESS-COOPERATIVE... § 1948.72 Industry reports. Any person regularly engaged in any coal or uranium development activity...

40 CFR 98.350 - Definition of source category.

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Industrial Wastewater Treatment § 98.350 Definition of source category. (a) This source category consists of anaerobic processes used to treat industrial wastewater and industrial wastewater treatment sludge at facilities that perform the operations listed in this paragraph. (1...

40 CFR 98.350 - Definition of source category.

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Industrial Wastewater Treatment § 98.350 Definition of source category. (a) This source category consists of anaerobic processes used to treat industrial wastewater and industrial wastewater treatment sludge at facilities that perform the operations listed in this paragraph. (1...

40 CFR 98.350 - Definition of source category.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Industrial Wastewater Treatment § 98.350 Definition of source category. (a) This source category consists of anaerobic processes used to treat industrial wastewater and industrial wastewater treatment sludge at facilities that perform the operations listed in this paragraph. (1...

40 CFR 98.350 - Definition of source category.

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Industrial Wastewater Treatment § 98.350 Definition of source category. (a) This source category consists of anaerobic processes used to treat industrial wastewater and industrial wastewater treatment sludge at facilities that perform the operations listed in this paragraph. (1...

Texas Solar Collaboration DOE Rooftop Solar Challenge City of Houston Project Summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ronk, Jennifer

2013-02-14

The City of Houston is committed to achieving a sustainable solar infrastructure. In 2008, Houston was named a United States Department of Energy (DOE) Solar America City. As a Solar America City, Houston teamed with the Houston Advanced Research Center (HARC), Sandia National Laboratory (Sandia), industry, and academia, to implement the Solar Houston Initiative and prepare the Solar Houston Plan. The Solar Houston initiative was focused on identifying and overcoming barriers associated with establishing a solar infrastructure that is incorporated into the City of Houston’s overall energy plan. A broad group of Houston area stakeholders, facilitated by HARC, came togethermore » to develop a comprehensive solar plan that went beyond technology to address barriers and establish demonstrations, public outreach, education programs and other activities. The plan included proposed scopes of work in four program areas: policies, solar integration, public outreach, and education. Through the support of the DOE SunShot Rooftop Solar Challenge (RSC) grant to the Texas Collaboration (San Antonio, Austin, and Hosuton), Houston has been able to implement several of the recommendations of the Solar Houston Plan. Specific recommendations that this project was able to support include; Working with the other Texas Solar America Cities (San Antonio and Austin), to harmonize permitting and inspection processes to simplify for installers and lower soft costs of installation; Participating in state level solar policy groups such as the Texas Renewable Energy Industries Association (TRIEA); Continued coordination with the local transmission and distribution utility (CenterPoint) and retail electric providers (REP); Identification of opportunities to improve permitting and interconnection; Providing training on PV systems to City inspectors; Educating the public by continuing outreach, training, and workshops, particularly using the the Green Building Resources Center; Evaluating methods of addressing financial barriers to residential solar; Maintaining www.solarhoustontx.org; and Continuing meetings with stakeholders to get ongoing feedback from the solar community on their needs. The following sections provide a brief summary of the activities completed under each of the nine tasks specifically related to the RSC grant. Reports and other backup information are included in the appendices.« less

Measuring the influence of industry sector membership on supply chain disruption reporting.

PubMed

Alcantara, Patrick

2015-01-01

The global Supply Chain Resilience Survey by the Business Continuity Institute and Zurich Insurance is a comprehensive study on the state of supply chains in different organisations worldwide. As a benchmarking tool, it also contains data about business continuity arrangements in place to ensure supply chain resilience. Given this study's historically qualitative approach to reporting, this paper aims to introduce quantitative analysis. In this paper, responses that report membership in Standard Industrial Classification 2007 industry sectors from the 2013 Supply Chain Resilience Survey were disaggregated and related to supply chain disruption reporting. A chi-square test of independence reveals that membership in a particular industry sector influences reporting of supply chain disruption. Nonetheless, the relationship between these variables is weak. This study demonstrates interesting differences between industry sectors in terms of supply chain resilience. Further research is required in terms of other variables in order to provide granularity and relevant findings to supply chain planners.

Swine production.

PubMed

Plain, Ronald L; Lawrence, John D

2003-07-01

The US swine industry is large and growing. The quantity of pork desired by consumers of US pork is growing at the rate of 1.5%/y. New production systems and new technology have enabled production per sow to grow at a rate of 4% annually in recent years. Consequently, the number of sows in the United States is declining. Because productivity growth is outpacing demand growth, the deflated price of hogs and pork is declining. Hog production and prices continue to exhibit strong seasonal and cyclic patterns. Pork production is usually lowest in the summer and highest in the fall. Production and prices tend to follow 4-year patterns. The US swine industry continues to evolve toward fewer and larger producers who rely on contracts for both hog production and marketing. In 2000, over half of the hogs marketed were from approximately 156 firms marketing more than 50,000 head annually. These producers finished 60% of their production in contract facilities. Over 90% of their marketings were under contract or were owned by a packer. These producers expressed a high level of satisfaction with hog production. Both they and their contract growers were satisfied with production contracts. These large producers were satisfied with their marketing contracts and planned to continue them in the future. The hog industry has changed a great deal in the last decade. There is little reason to believe this rapid rate of change will not continue. This swine industry is highly competitive and profit driven. Profit margins are too small to allow producers the luxury of ignoring new technology and innovative production systems. Consequently, hog production will continue its rapid evolution from traditional agriculture to typical industry.

Workplace Breastfeeding Support Varies by Employment Type: The Service Workplace Disadvantage.

PubMed

Snyder, Kailey; Hansen, Kelli; Brown, Sara; Portratz, Amy; White, Kate; Dinkel, Danae

The majority of women are returning to work full-time after childbirth, and support within their place of employment may influence intention and duration for breastfeeding, but more research is needed. Therefore, the purpose of this study was to explore the influence of employment type on breastfeeding duration upon return to work by examining informal (i.e., verbal encouragement) and direct (i.e., lactation space, flexible time) factors of support. This was a retrospective survey of women's returning-to-work experiences while breastfeeding. Survey contents included respondent demographics as well as questions surrounding perceptions of employer support, work environment, and goal/satisfaction regarding breastfeeding. Data were analyzed via crosstabs and chi-square goodness of fit tests. A total of 1,002 women completed the survey. Significant differences were seen across different employment types. Women within the professional/management industry were most likely to receive informal and direct support for breastfeeding upon return to work. Women within the service industry and production/transportation industry reported receiving the lowest levels of informal and direct support. Workplace support varies by employment type and women in the service and production/transportation industry appear to be at a disadvantage compared with other employment types. There is a need for more breastfeeding support programs to be developed that target specific workplace characteristics.

The impact of pharmaceutical company funding on results of randomized trials of nicotine replacement therapy for smoking cessation: a meta-analysis.

PubMed

Etter, Jean-François; Burri, Mafalda; Stapleton, John

2007-05-01

To assess whether source of funding affected the results of trials of nicotine replacement therapy (NRT) for smoking cessation. We reviewed all randomized controlled trials included in the Cochrane review. There were insufficient non-industry trials of the newer products for these to be included. We included 90 trials of either the nicotine gum (52) or nicotine patch (38). They comprised 18 238 treatment and 16 235 control participants. Forty-nine showed evidence of industry support (18 gum, 31 patch). Industry (31 of 49, 63%) compared with non-industry (seven of 41, 17%, P < 0.001) supported a higher proportion of nicotine patch studies and had larger sample sizes (479 versus 268, P = 0.04). Twenty-five (51%) industry trials reported statistically significant (P < 0.05) results, compared with nine (22%) non-industry trials (OR = 3.70, 95% CI = 1.46-9.35). This difference was not explained by trial characteristics. Industry-supported trials had a pooled odds ratio of 1.90 (1.67-2.16), compared with 1.61 (1.43-1.80) for other studies (chi(2) = 3.6, P = 0.058). There was evidence of funnel-plot asymmetry among industry trials (t = 4.35, P < 0.001), but not among other trials, indicating that several small null-effect industry trials may not have reached publication. After imputation adjustment, the odds ratio for industry trials reduced to 1.64 (1.43-1.89) and the overall NRT odds ratio reduced from 1.73 (1.60-1.90) to 1.62 (1.49-1.77). Compared with independent trials, industry-supported trials were more likely to produce statistically significant results and larger odds ratios. These differences persisted after adjustment for basic trial characteristics. Although we had no data on the amount of funding for each trial, it is possible that more resources led to higher treatment compliance and therefore greater efficacy in industry-supported trials. Differences can also possibly be explained by publication bias with several small, null-effect industry studies not having reached publication. After adjustment for this possible bias, results for industry trials were lower and similar to non-industry results. Similarly, the overall estimate of the net effect for these products reduces to about 5% attributable 1-year successes. This remains of considerable public health benefit. Registration of clinical trials has become mandatory in many countries since most of the trials considered here were conducted, and this should reduce the potential for publication bias in future.

Technology transfer from NASA to targeted industries, volume 2

NASA Technical Reports Server (NTRS)

Mccain, Wayne; Schroer, Bernard J.; Souder, William E.; Spann, Mary S.; Watters, Harry; Ziemke, M. Carl

1993-01-01

This volume contains the following materials to support Volume 1: (1) Survey of Metal Fabrication Industry in Alabama; (2) Survey of Electronics Manufacturing/Assembly Industry in Alabama; (3) Apparel Modular Manufacturing Simulators; (4) Synopsis of a Stereolithography Project; (5) Transferring Modular Manufacturing Technology to an Apparel Firm; (6) Letters of Support; (7) Fact Sheets; (8) Publications; and (9) One Stop Access to NASA Technology Brochure.

Strong advocacy led to successful implementation of smokefree Mexico City.

PubMed

Crosbie, Eric; Sebrié, Ernesto M; Glantz, Stanton A

2011-01-01

To describe the approval process and implementation of the 100% smokefree law in Mexico City and a competing federal law between 2007 and 2010. Reviewed smokefree legislation, published newspaper articles and interviewed key informants. Strong efforts by tobacco control advocacy groups and key policymakers in Mexico City in 2008 prompted the approval of a 100% smokefree law following the WHO FCTC. As elsewhere, the tobacco industry utilised the hospitality sector to block smokefree legislation, challenged the City law before the Supreme Court and promoted the passage of a federal law that required designated smoking areas. These tactics disrupted implementation of the City law by causing confusion over which law applied in Mexico City. Despite interference, the City law increased public support for 100% smokefree policies and decreased the social acceptability of smoking. In September 2009, the Supreme Court ruled in favour of the City law, giving it the authority to go beyond the federal law to protect the fundamental right of health for all citizens. Early education and enforcement efforts by tobacco control advocates promoted the City law in 2008 but advocates should still anticipate continuing opposition from the tobacco industry, which will require continued pressure on the government. Advocates should utilise the Supreme Court's ruling to promote 100% smokefree policies outside Mexico City. Strong advocacy for the City law could be used as a model of success throughout Mexico and other Latin American countries.

Flexible Electronics Development Supported by NASA

NASA Technical Reports Server (NTRS)

Baumann, Eric

2014-01-01

The commercial electronics industry is leading development in most areas of electronics for NASA applications; however, working in partnership with industry and the academic community, results from NASA research could lead to better understanding and utilization of electronic materials by the flexible electronics industry. Innovative ideas explored by our partners in industry and the broader U.S. research community help NASA execute our missions and bring new American products and services to the global technology marketplace. [Mike Gazarik, associate administrator for Space Technology, NASA Headquarters, Washington DC] This presentation provides information on NASA needs in electronics looking towards the future, some of the work being supported by NASA in flexible electronics, and the capabilities of the Glenn Research Center supporting the development of flexible electronics.

Approaches to Enable Demand Response by Industrial Loads for Ancillary Services Provision

NASA Astrophysics Data System (ADS)

Zhang, Xiao

Demand response has gained significant attention in recent years as it demonstrates potentials to enhance the power system's operational flexibility in a cost-effective way. Industrial loads such as aluminum smelters, steel manufacturers, and cement plants demonstrate advantages in supporting power system operation through demand response programs, because of their intensive power consumption, already existing advanced monitoring and control infrastructure, and the strong economic incentive due to the high energy costs. In this thesis, we study approaches to efficiently integrate each of these types of manufacturing processes as demand response resources. The aluminum smelting process is able to change its power consumption both accurately and quickly by controlling the pots' DC voltage, without affecting the production quality. Hence, an aluminum smelter has both the motivation and the ability to participate in demand response. First, we focus on determining the optimal regulation capacity that such a manufacturing plant should provide. Next, we focus on determining its optimal bidding strategy in the day-ahead energy and ancillary services markets. Electric arc furnaces (EAFs) in steel manufacturing consume a large amount of electric energy. However, a steel plant can take advantage of time-based electricity prices by optimally arranging energy-consuming activities to avoid peak hours. We first propose scheduling methods that incorporate the EAFs' flexibilities to reduce the electricity cost. We then propose methods to make the computations more tractable. Finally, we extend the scheduling formulations to enable the provision of spinning reserve. Cement plants are able to quickly adjust their power consumption rate by switching on/off the crushers. However, switching on/off the loading units only achieves discrete power changes, which restricts the load from offering valuable ancillary services such as regulation and load following, as continuous power changes are required for these services. We propose methods that enable these services with the support of an on-site energy storage device. As demonstrated by the case studies, the proposed approaches are effective and can generate practical production instructions for the industrial loads. This thesis not only provides methods to enable demand response by industrial loads but also potentially encourages industrial loads to be active in electricity markets.

29 CFR 2530.200b-7 - Day of service for employees in the maritime industry.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 9 2013-07-01 2013-07-01 false Day of service for employees in the maritime industry. 2530.200b-7 Section 2530.200b-7 Labor Regulations Relating to Labor (Continued) EMPLOYEE BENEFITS SECURITY... industry. (a) General rule. A day of service in the maritime industry which must, as a minimum, be counted...

29 CFR 2530.200b-7 - Day of service for employees in the maritime industry.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 9 2012-07-01 2012-07-01 false Day of service for employees in the maritime industry. 2530.200b-7 Section 2530.200b-7 Labor Regulations Relating to Labor (Continued) EMPLOYEE BENEFITS SECURITY... industry. (a) General rule. A day of service in the maritime industry which must, as a minimum, be counted...

29 CFR 2530.200b-7 - Day of service for employees in the maritime industry.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 9 2011-07-01 2011-07-01 false Day of service for employees in the maritime industry. 2530.200b-7 Section 2530.200b-7 Labor Regulations Relating to Labor (Continued) EMPLOYEE BENEFITS SECURITY... industry. (a) General rule. A day of service in the maritime industry which must, as a minimum, be counted...

29 CFR 2530.200b-7 - Day of service for employees in the maritime industry.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 9 2014-07-01 2014-07-01 false Day of service for employees in the maritime industry. 2530.200b-7 Section 2530.200b-7 Labor Regulations Relating to Labor (Continued) EMPLOYEE BENEFITS SECURITY... industry. (a) General rule. A day of service in the maritime industry which must, as a minimum, be counted...

Comparative Analysis of Recruitment Qualifications of Industrial Designers in Turkey through Undergraduate Education Programs and Online Recruitment Resources

ERIC Educational Resources Information Center

Erkarslan, Onder; Kaya, Nazife A.; Dilek, Ozgun

2013-01-01

Although the term "industrial designer" is a well known title, the understanding of industrial design as a profession is still unclear, as evidenced by its application in the sector. In light of this, schools of industrial design should, despite the immense contributions to the sector made by their past graduates, continuously revise…

HSE training and competence assessment in the geophysical industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Covil, M.W.; Soethout, J.A.; Reynolds, G.

1996-11-01

This paper looks at the efforts of the seismic geophysical industry to continually improve it`s health, safety and environmental performance, and in particular to improve the HSE behavior and understanding of individuals within the industry. Specifically it deals with the HSE training and assessment of competence of individuals in relation to their job responsibilities, based on best industry practice.

49 CFR 1242.86 - Industrial development (account XX-61-90).

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 9 2010-10-01 2010-10-01 false Industrial development (account XX-61-90). 1242.86 Section 1242.86 Transportation Other Regulations Relating to Transportation (Continued) SURFACE....86 Industrial development (account XX-61-90). These accounts pertain solely to freight service and...

Job Prospects for Industrial Engineers.

ERIC Educational Resources Information Center

Basta, Nicholas

1986-01-01

Because of the impetus on how to improve productivity in companies, the demand for graduating industrial engineers continues to be strong from a variety of sources. Starting salary offers for graduates have been averaging $26,784. Enrollments in industrial engineering programs are increasing (with 3,923 graduates in 1984). (JN)

29 CFR 1910.24 - Fixed industrial stairs.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 5 2012-07-01 2012-07-01 false Fixed industrial stairs. 1910.24 Section 1910.24 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Walking-Working Surfaces § 1910.24 Fixed industrial stairs. (a...

46 CFR 58.60-9 - Industrial systems: Design.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Industrial systems: Design. 58.60-9 Section 58.60-9 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS Industrial Systems and Components on Mobile Offshore Drilling Units (MODU...

46 CFR 58.60-5 - Industrial systems: Locations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Industrial systems: Locations. 58.60-5 Section 58.60-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS Industrial Systems and Components on Mobile Offshore Drilling Units (MODU...

46 CFR 58.60-5 - Industrial systems: Locations.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 2 2014-10-01 2014-10-01 false Industrial systems: Locations. 58.60-5 Section 58.60-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS Industrial Systems and Components on Mobile Offshore Drilling Units (MODU...

46 CFR 58.60-7 - Industrial systems: Piping.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 2 2012-10-01 2012-10-01 false Industrial systems: Piping. 58.60-7 Section 58.60-7 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS Industrial Systems and Components on Mobile Offshore Drilling Units (MODU...

46 CFR 58.60-5 - Industrial systems: Locations.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 2 2012-10-01 2012-10-01 false Industrial systems: Locations. 58.60-5 Section 58.60-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS Industrial Systems and Components on Mobile Offshore Drilling Units (MODU...