Method and an apparatus to control the lateral motion of a long metal bar being formed by a mechanical process such as rolling or drawing

DOEpatents

Chang, Tzyy-Shuh; Huang, Hsun-Hau; Lin, Chang-Hung

2007-10-02

An adjustable guide, includes two or more mechanisms each having a rotatable retaining element containing a retaining groove with a variable radius in its perimeter surface. The grooves form a guidance path to control the lateral, i.e. non-axial, motion of a long bar moving along a longitudinal axis during a production process.The diameter of the guidance path varies according to the variable radii of the grooves. The guidance path increases in size at a predetermined rate, from a point of origin to an end point on the retaining groove. Rotating the retaining elements causes the diameter of the retaining grooves to change so that the size of the guidance path can be changed to match the diameter of the bar being rolled, size of the guidance path can be changed to fit the diameter of a new bar rolled without having to exchange the guide for a different sized guide, reduce fiction between the bar and the guide, a media, such as compressed air, can be injected between the retaining elements via orifices.Each retaining element is attached to a mounting apparatus. The mounting apparatus can be fixed or flexible. The flexible mounting apparatus includes one or more springs and one or more shock absorbers. A force neutral position of the flexible mounting apparatus is designed to be located on the predetermined ideal bar path line. The flexible mounting apparatus dissipates kinetic energy from the bar thereby reducing the bar's lateral motion relative to the ideal bar path line.The damping ratio of the mounting apparatus can be adjustable to alter the product's vibration mode to enable better control of the bar's lateral motion.

Lung Middle Lobe Laceration Needing Lobectomy as Complication of Nuss Bar Removal.

PubMed

Henry, Brice; Lacroix, Valérie; Pirotte, Thierry; Docquier, Pierre-Louis

2018-01-01

Minimally invasive procedure for the treatment of pectus excavatum as described by Nuss has been used from 1987. The bar initially introduced blindly is now introduced under thoracoscopic control to increase safety of the procedure. It is usually removed two to three years after its insertion in a one-day procedure. Complications of the bar removal are rare but potentially serious. We report the case of a serious complication which occurred immediately after the Nuss bar removal. A 15-year-old boy underwent a Nuss procedure for a severe pectus excavatum without relevant complication. The bar has been removed two years after its insertion in a minimally invasive procedure. Unfortunately, he developed in the immediate postoperative period a hemopneumothorax due to a right middle lobe laceration which required a middle lobectomy by thoracotomy for hemostasis. Lesions of intrathoracic organs are a rare but potentially serious complication of the removal of the Nuss bar. We now propose to perform this procedure under thoracoscopic control to avoid it. In our experience, adhesions between the bar and the pleura are always present, and those with potential risk for bleeding or inducing intrathoracic organ lesions are suppressed prior to the bar removal.

Membrane curvature and its generation by BAR proteins

PubMed Central

Mim, Carsten; Unger, Vinzenz M

2012-01-01

Membranes are flexible barriers that surround the cell and its compartments. To execute vital functions such as locomotion or receptor turnover, cells need to control the shapes of their membranes. In part, this control is achieved through membrane-bending proteins, such as the bin/amphiphysin/rvs domain (BAR) proteins. Many open questions remain about the mechanisms by which membrane-bending proteins function. Addressing this shortfall, recent structures of BAR protein:membrane complexes support existing mechanistic models, but also produced novel insights into how BAR-domain proteins sense, stabilize and generate curvature. Here we review these recent findings, focusing on how BAR proteins interact with the membrane, and how the resulting scaffold structures might aid the recruitment of other proteins to the sites where membranes are bent. PMID:23058040

Prototype Stop Bar System Evaluation at John F. Kennedy International Airport

DTIC Science & Technology

1992-09-01

2 Red Stop Bar Visual Presentation 4 3 Green Stop Bar Visual Presentation 5 4 Photographs of Red and Green Inset Stop Bar Lights 6 5 Photographs of...to green. This provides pilots with a visual confirmation of the controller’s verbal clearance and is intended to prevent runway incursions. The Port...34 colocated with the red lights. The visual presentation of an individual stop bar appears as either five red lights (see figure 2), or five green

Development of an active boring bar for increased chatter immunity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Redmond, J.; Barney, P.; Smith, D.

The development and initial evaluation of a prototype boring bar featuring active vibration control for increased chatter immunity is described. The significance of active damping both normal and tangential to the workpiece surface is evaluated, indicating the need for two axis control to ensure adequate performance over expected variations in tool mounting procedures. The prototype tool features a commercially available boring bar modified to accommodate four PZT stack actuators for two axis bending control. Measured closed-loop dynamics are combined with a computer model of the boring process to simulate increased metal removal rate and improved workpiece surface finish through activemore » control.« less

Aircraft control position indicator

NASA Technical Reports Server (NTRS)

Dennis, Dale V. (Inventor)

1987-01-01

An aircraft control position indicator was provided that displayed the degree of deflection of the primary flight control surfaces and the manner in which the aircraft responded. The display included a vertical elevator dot/bar graph meter display for indication whether the aircraft will pitch up or down, a horizontal aileron dot/bar graph meter display for indicating whether the aircraft will roll to the left or to the right, and a horizontal dot/bar graph meter display for indicating whether the aircraft will turn left or right. The vertical and horizontal display or displays intersect to form an up/down, left/right type display. Internal electronic display driver means received signals from transducers measuring the control surface deflections and determined the position of the meter indicators on each dot/bar graph meter display. The device allows readability at a glance, easy visual perception in sunlight or shade, near-zero lag in displaying flight control position, and is not affected by gravitational or centrifugal forces.

Some relations between classically conditioned aggression and conditioned suppression in squirrel monkeys.

PubMed Central

Hake, D F; Campbell, R L

1980-01-01

During three experiments with squirrel monkeys, stimulus and shock pairings were given in the presence of a bite tube. Experiments 1 and 2 used a conditioned-suppression procedure in which bar pressing was reinforced with food. A transparent shield prevented biting of the bar. When the stimulus was paired with shock, bar pressing decreased (conditioned suppression) and tube biting increased during the stimulus (classically conditioned aggression). When the bite tube was removed on alternate sessions in Experiment 2, there was more suppression when the tube was present, thus suggesting that biting competed with bar pressing. However, this simple competing-response interpretation was complicated by the findings of Experiment 3 where, with naive monkeys, bar pressing was never reinforced with food, yet bar pressing was induced during the stimulus and was highest when the bite tube was absent. The fact that stimulus-induced bar pressing developed inciated that bar pressing in conditioned-suppression procedures, suppressed or not, may be maintained by two types of control--the food reinforcer and induced CS control. The higher rate of induced bar pressing during the stimulus with the bite tube absent confounds a simple competing response interpretation of conditioned suppression. It suggests that shock-induced responses during conditioned suppression could be both contributing to and competing with responding maintained by food, with the net effect depending on specific but ill-defined features of the situation. PMID:7190996

Features and perspectives of automatized construction crane-manipulators

NASA Astrophysics Data System (ADS)

Stepanov, Mikhail A.; Ilukhin, Peter A.

2018-03-01

Modern construction industry still has a high percentage of manual labor, and the greatest prospects of improving the construction process are lying in the field of automatization. In this article automatized construction manipulator-cranes are being studied in order to achieve the most rational design scheme. This is done through formulating a list of general conditions necessary for such cranes and a set of specialized kinematical conditions. A variety of kinematical schemes is evaluated via these conditions, and some are taken for further dynamical analisys. The comparative dynamical analisys of taken schemes was made and the most rational scheme was defined. Therefore a basis for a more complex and practical research of manipulator-cranes design is given and ways to implement them on practical level can now be calculated properly. Also, the perspectives of implementation of automated control systems and informational networks on construction sites in order to boost the quality of construction works, safety of labour and ecological safety are shown.

Barring intervention? Lesbian and gay bars as an underutilized venue for tobacco interventions.

PubMed

Leibel, Katherine; Lee, Joseph G L; Goldstein, Adam O; Ranney, Leah M

2011-07-01

Lesbian, gay, bisexual, and transgender (LGBT) communities are at high risk for tobacco use. While LGBT communities have historically considered bars to be safe places to socialize and congregate, these spaces are often tobacco-friendly environments and may have potential as sites for much needed intervention. Only a few public health interventions have attempted to work through bars and clubs to decrease tobacco use in the LGBT populations. Evidence from HIV prevention suggests some potential interventions in bars, and the tobacco industry has worked extensively (and successfully) to utilize bars in marketing efforts. Lesbian and gay bars are underutilized in tobacco control, suggesting missed avenues for chronic disease prevention programs. Researchers and communities should continue to recognize the importance of clean indoor air laws covering bars and develop additional strategies for reaching LGBT populations with disparities.

49 CFR 393.207 - Suspension systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... bar. No torsion bar or torsion bar suspension shall be cracked or broken. (f) Air suspensions. The air... the controls are either located on the trailer, or the power unit and trailer combination are not....207 Suspension systems. (a) Axles. No axle positioning part shall be cracked, broken, loose or missing...

Chest Wall Constriction after the Nuss Procedure Identified from Chest Radiograph and Multislice Computed Tomography Shortly after Removal of the Bar.

PubMed

Chang, Pei-Yeh; Zeng, Qi; Wong, Kin-Sun; Wang, Chao-Jan; Chang, Chee-Jen

2016-01-01

This study radiographically examined the changes in the chest walls of patients with pectus excavatum (PE) after Nuss bar removal, to define the deformation caused by the bar and stabilizer. In the first part of the study, we compared the changes in chest radiographs of patients with PE to a preoperation PE control group. In the second part, we used multislice computed tomography (CT) scans to provide three-dimensional reconstructions with which to evaluate the changes to the thoracic wall. Part 1 From June 2006 to August 2011, 1,125 patients with PE who had posteroanterior chest radiographs taken before undergoing the Nuss procedure at four hospitals were enrolled as a preoperative control group. At the same time, 203 patients who had the bar removed were enrolled as the study group. The maximum dimensions of the outer boundary of the first to ninth rib pairs (R1-R9, rib pair width), chest height, and chest width were measured. Part 2 Thirty-one consecutive patients with PE (20 males and 11 females) who underwent Nuss bar removal were evaluated 7 to 30 days after operation. During this period, a further 34 patients with PE who had undergone CT imaging before bar insertion were evaluated and compared with the postoperative group. Part 1 The width of the lower ribs (R4-R9) after bar removal was significantly less than in the age-matched controls. The ribs adjacent to the bar (R5-R7) showed the greatest restriction. The width of the upper ribs (R1-R3) 2 to 3 years after bar placement did not differ significantly from the controls. Patients who were operated on after 10 years of age had less of a restrictive effect. Three years of bar placement resulted in more restriction than a 2-year period, particularly in patients younger than 10 years old. Part 2: A significant constriction of the chest wall was observed in 13 patients after removal of the Nuss bar. Constriction at ribs 5 to 8 was found to be present adjacent to the site of bar insertion. However, constriction of the chest wall was found in only 3 of the 34 patients in the preoperative group. The severity of constriction (as graded by the spline model) also increased in the postoperative group. The growth of the chest wall was restricted after placement of the Nuss bar for PE correction. Long-term follow-up of chest wall growth is needed to clarify whether such constriction resolves with time. Georg Thieme Verlag KG Stuttgart · New York.

Effects of Gravel Bars on Nutrient Spiraling in Bedrock-Alluvium Streams

NASA Astrophysics Data System (ADS)

Iobst, B. R.; Carroll, E. P.; Furbish, D. J.

2007-05-01

The importance of the connection between nutrient transport and local stream geomorphology is becoming increasingly important. Studies have shown that the interconnectivity of nutrient cycles in the downstream direction is in part controlled by the distribution and size of gravel bars in low order streams, as hyporheic flow occurs dominantly through alternate and mid-channel gravel bars. For this investigation multiple gravel bars in a 3rd order bedrock-alluvium stream were studied to determine general relationships between nutrient spiraling and hyporheic flow. The first goal was to understand (1) the extent to which water moves through hyporheic zones and (2) the basic chemistry of the hyporheic water. The second part of the study was to understand how nutrients, notably nitrogen, are affected in their cycling by the relatively long residence times encountered in gravel bars during hyporheic flow. Wells were installed along a 600 m reach of Panther Creek, KY in selected bars, as well as in a secondary location involving a grid installation pattern in one large bar. Results have shown that hyporheic flow through gravel bars is an important factor in influencing stream chemistry. Background water chemistry surveys have shown that certain parameters, specifically ammonium and nitrogen concentrations vary downstream, and that the dominant control over these changes is gravel bar location. Rhodamine WT was used in field tracer tests to track the travel times of water through bars as well as partitioning of water between the open channel and hyporheic flows. Further tests will be conducted utilizing a stable isotope study to determine how nitrogen is affected by hyporheic flow, and what implications this has for nutrient transport. We expect results to show that the spacing and size of gravel bars is a dominant control in key nutrient spiraling parameters, namely uptake lengths and overall nitrogen cycling rates. This has implications for how natural systems will respond to human impacts, both through the modification of the physical template of stream systems as well as increased anthropogenic loading of nitrogen.

Comparison of S. cerevisiae F-BAR domain structures reveals a conserved inositol phosphate binding site

PubMed Central

Moravcevic, Katarina; Alvarado, Diego; Schmitz, Karl R.; Kenniston, Jon A.; Mendrola, Jeannine M.; Ferguson, Kathryn M.; Lemmon, Mark A.

2015-01-01

SUMMARY F-BAR domains control membrane interactions in endocytosis, cytokinesis, and cell signaling. Although generally thought to bind curved membranes containing negatively charged phospholipids, numerous functional studies argue that differences in lipid-binding selectivities of F-BAR domains are functionally important. Here, we compare membrane-binding properties of the S. cerevisiae F-BAR domains in vitro and in vivo. Whereas some F-BAR domains (such as Bzz1p and Hof1p F-BARs) bind equally well to all phospholipids, the F-BAR domain from the RhoGAP Rgd1p preferentially binds phosphoinositides. We determined X-ray crystal structures of F-BAR domains from Hof1p and Rgd1p, the latter bound to an inositol phosphate. The structures explain phospholipid-binding selectivity differences, and reveal an F-BAR phosphoinositide binding site that is fully conserved in a mammalian RhoGAP called Gmip, and is partly retained in certain other F-BAR domains. Our findings reveal previously unappreciated determinants of F-BAR domain lipid-binding specificity, and provide a basis for its prediction from sequence. PMID:25620000

A Coincidence Detection Mechanism Controls PX-BAR Domain-Mediated Endocytic Membrane Remodeling via an Allosteric Structural Switch.

PubMed

Lo, Wen-Ting; Vujičić Žagar, Andreja; Gerth, Fabian; Lehmann, Martin; Puchkov, Dymtro; Krylova, Oxana; Freund, Christian; Scapozza, Leonardo; Vadas, Oscar; Haucke, Volker

2017-11-20

Clathrin-mediated endocytosis occurs by bending and remodeling of the membrane underneath the coat. Bin-amphiphysin-rvs (BAR) domain proteins are crucial for endocytic membrane remodeling, but how their activity is spatiotemporally controlled is largely unknown. We demonstrate that the membrane remodeling activity of sorting nexin 9 (SNX9), a late-acting endocytic PX-BAR domain protein required for constriction of U-shaped endocytic intermediates, is controlled by an allosteric structural switch involving coincident detection of the clathrin adaptor AP2 and phosphatidylinositol-3,4-bisphosphate (PI(3,4)P 2 ) at endocytic sites. Structural, biochemical, and cell biological data show that SNX9 is autoinhibited in solution. Binding to PI(3,4)P 2 via its PX-BAR domain, and concomitant association with AP2 via sequences in the linker region, releases SNX9 autoinhibitory contacts to enable membrane constriction. Our results reveal a mechanism for restricting the latent membrane remodeling activity of BAR domain proteins to allow spatiotemporal coupling of membrane constriction to the progression of the endocytic pathway. Copyright © 2017 Elsevier Inc. All rights reserved.

Binding space and time through action

PubMed Central

Binetti, N.; Hagura, N.; Fadipe, C.; Tomassini, A.; Walsh, V.; Bestmann, S.

2015-01-01

Space and time are intimately coupled dimensions in the human brain. Several lines of evidence suggest that space and time are processed by a shared analogue magnitude system. It has been proposed that actions are instrumental in establishing this shared magnitude system. Here we provide evidence in support of this hypothesis, by showing that the interaction between space and time is enhanced when magnitude information is acquired through action. Participants observed increases or decreases in the height of a visual bar (spatial magnitude) while judging whether a simultaneously presented sequence of acoustic tones had accelerated or decelerated (temporal magnitude). In one condition (Action), participants directly controlled the changes in bar height with a hand grip device, whereas in the other (No Action), changes in bar height were externally controlled but matched the spatial/temporal profile of the Action condition. The sign of changes in bar height biased the perceived rate of the tone sequences, where increases in bar height produced apparent increases in tone rate. This effect was amplified when the visual bar was actively controlled in the Action condition, and the strength of the interaction was scaled by the magnitude of the action. Subsequent experiments ruled out that this was simply explained by attentional factors, and additionally showed that a monotonic mapping is also required between grip force and bar height in order to bias the perception of the tones. These data provide support for an instrumental role of action in interfacing spatial and temporal quantities in the brain. PMID:25808892

Subsurface flow in lowland river gravel bars

NASA Astrophysics Data System (ADS)

Bray, E. N.; Dunne, T.

2017-09-01

Geomorphic and hydraulic processes, which form gravel bars in large lowland rivers, have distinctive characteristics that control the magnitude and spatial patterns of infiltration and exfiltration between rivers and their immediate subsurface environments. We present a bedform-infiltration relation together with a set of field measurements along two reaches of the San Joaquin River, CA to illustrate the conditions required for infiltration and exfiltration of flow between a stream and its undulating bed, and a numerical model to investigate the factors that affect paths and residence times of flow through barforms at different discharges. It is shown that asymmetry of bar morphology is a first-order control on the extent and location of infiltration, which would otherwise produce equal areas of infiltration and exfiltration under the assumption of sinusoidal bedforms. Hydraulic conductivity varies by orders of magnitude due to fine sediment accumulation and downstream coarsening related to the process of bar evolution. This systematic variability not only controls the magnitude of infiltration, but also the residence time of flow through the bed. The lowest hydraulic conductivity along the reach occurred where the difference between the topographic gradient and the water-surface gradient is at a maximum and thus where infiltration would be greatest into a homogeneous bar, indicating the importance of managing sand supply to maintain the ventilation and flow through salmon spawning riffles. Numerical simulations corroborate our interpretation that infiltration patterns and rates are controlled by distinctive features of bar morphology.

Thin Film Technology of High-Critical-Temperature Superconducting Electronics.

DTIC Science & Technology

1985-12-11

ANALISIS OF THIN-FILM SUPERCONDUCTORS J. Talvacchio, M. A. Janocko, J. R. Gavaler, and A...in the areas of substrate preparation, niobum nitride, nlobium-tin, and molybdenum-rhenium. AN INTEGRATED DEPOSITION AND ANALISI - FACILITT The four...mobility low (64). The voids are separating 1-3 nm clusters of dense deposit. At low deposition temperatures this microstructure will persist near

Bar Code Labels

NASA Technical Reports Server (NTRS)

1988-01-01

American Bar Codes, Inc. developed special bar code labels for inventory control of space shuttle parts and other space system components. ABC labels are made in a company-developed anodizing aluminum process and consecutively marketed with bar code symbology and human readable numbers. They offer extreme abrasion resistance and indefinite resistance to ultraviolet radiation, capable of withstanding 700 degree temperatures without deterioration and up to 1400 degrees with special designs. They offer high resistance to salt spray, cleaning fluids and mild acids. ABC is now producing these bar code labels commercially or industrial customers who also need labels to resist harsh environments.

Testing of an actively damped boring bar featuring structurally integrated PZT stack actuators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Redmond, J.; Barney, P.

This paper summarizes the results of cutting tests performed using an actively damped boring bar to minimize chatter in metal cutting. A commercially available 2 inch diameter boring bar was modified to incorporate PZT stack actuators for controlling tool bending vibrations encountered during metal removal. The extensional motion of the actuators induce bending moments in the host structure through a two-point preloaded mounting scheme. Cutting tests performed at various speeds and depths of cuts on a hardened steel workpiece illustrate the bar`s effectiveness toward eliminating chatter vibrations and improving workpiece surface finish.

Beyond the Schr{umlt o}dinger Equation: Quantum Motion with Traversal Time Control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sokolovski, D.

1997-12-01

We study a quantum particle, for which the duration {tau} it spends in some region of space is controlled by a meter, e.g., a Larmor clock. The particle is described by a wave function {Psi}(x,t{vert_bar}{tau}) , with {vert_bar}{Psi}(x,t{vert_bar}{tau}){vert_bar}{sup 2} giving the distribution of the meter{close_quote}s readings at location x . The wave function satisfies the {open_quotes}clocked{close_quotes} Schr{umlt o}dinger equation, which we solve numerically for the cases of bound motion and wave packet scattering. The method is shown to be a natural extension of the conventional quantum mechanics. {copyright} {ital 1997} {ital The American Physical Society}

Enhancing roll stability of heavy vehicle by LQR active anti-roll bar control using electronic servo-valve hydraulic actuators

NASA Astrophysics Data System (ADS)

Vu, Van Tan; Sename, Olivier; Dugard, Luc; Gaspar, Peter

2017-09-01

Rollover of heavy vehicle is an important road safety problem world-wide. Although rollovers are relatively rare events, they are usually deadly accidents when they occur. The roll stability loss is the main cause of rollover accidents in which heavy vehicles are involved. In order to improve the roll stability, most of modern heavy vehicles are equipped with passive anti-roll bars to reduce roll motion during cornering or riding on uneven roads. However these may be not sufficient to overcome critical situations. This paper introduces the active anti-roll bars made of four electronic servo-valve hydraulic actuators, which are modelled and integrated in a yaw-roll model of a single unit heavy vehicle. The control signal is the current entering the electronic servo-valve and the output is the force generated by the hydraulic actuator. The active control design is achieved solving a linear optimal control problem based on the linear quadratic regulator (LQR) approach. A comparison of several LQR controllers is provided to allow for tackling the considered multi-objective problems. Simulation results in frequency and time domains show that the use of two active anti-roll bars (front and rear axles) drastically improves the roll stability of the single unit heavy vehicle compared with the passive anti-roll bar.

Effects of a groyne field on inner bar dynamics: Anglet, France

NASA Astrophysics Data System (ADS)

de Santiago, Inaki; Morichon, Denis; Arnould, Philippe

2017-04-01

Groynes are usually designed to limit beach erosion by mitigating longshore sediment transport. However, little is known about their side effects on inner-bar morphodynamics in double sandbar systems. While most of the studies are focused on natural systems where the outer-bar morphology drives inner-bar dynamics (offshore to nearshore process), this work focuses on the role of groynes on the inner bar dynamics (nearshore to offshore process). The study is based on 3-years field observations carried out at the beach of Anglet in the south-west of France. This engineered beach is 4 km long, limited by a rocky headland in the south and a 1 km long jetty at the entrance of the Adour river in the North. The study area concerns the south part of the beach and includes a series of four groynes, unevenly spaced and extending about 100 m seaward. Morphology changes observations were derived from images collected with a video system (http://sirena.univ-pau.fr/), and bi-annual topo-Bathymetric surveys. A special attention was paid to study the mechanisms controlling the observed morphology changes using the XBeach numerical model. Data analysis reveals that the study site is dominated by a double sandbar system. Both bars can evolve from reasonably alongshore-uniform to crescentic bars. Surprisingly, the beach may show episodes where the inner bar evolves from alonghsore uniform to non-uniform despite an alongshore uniform outer bar. Numerical results corroborate that the formation of inner bar crescentic features can be formed without the presence of an outer non-uniform bar under certain wave conditions for the study site. This study shows that inner bar evolution in the presence of groynes can be controlled by topographic rip channels and not only by morphological coupling as usually observed on natural double sandbar systems.

CRDM with separate SCRAM latch engagement and locking

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dodd, Christopher D.; DeSantis, Paul K.; Stambaugh, Kevin J.

A control rod drive mechanism (CRDM) configured to latch onto the lifting rod of a control rod assembly and including separate latch engagement and latch holding mechanisms. A CRDM configured to latch onto the lifting rod of a control rod assembly and including a four-bar linkage closing the latch, wherein the four-bar linkage biases the latch closed under force of gravity.

Comparison of Saccharomyces cerevisiae F-BAR domain structures reveals a conserved inositol phosphate binding site.

PubMed

Moravcevic, Katarina; Alvarado, Diego; Schmitz, Karl R; Kenniston, Jon A; Mendrola, Jeannine M; Ferguson, Kathryn M; Lemmon, Mark A

2015-02-03

F-BAR domains control membrane interactions in endocytosis, cytokinesis, and cell signaling. Although they are generally thought to bind curved membranes containing negatively charged phospholipids, numerous functional studies argue that differences in lipid-binding selectivities of F-BAR domains are functionally important. Here, we compare membrane-binding properties of the Saccharomyces cerevisiae F-BAR domains in vitro and in vivo. Whereas some F-BAR domains (such as Bzz1p and Hof1p F-BARs) bind equally well to all phospholipids, the F-BAR domain from the RhoGAP Rgd1p preferentially binds phosphoinositides. We determined X-ray crystal structures of F-BAR domains from Hof1p and Rgd1p, the latter bound to an inositol phosphate. The structures explain phospholipid-binding selectivity differences and reveal an F-BAR phosphoinositide binding site that is fully conserved in a mammalian RhoGAP called Gmip and is partly retained in certain other F-BAR domains. Our findings reveal previously unappreciated determinants of F-BAR domain lipid-binding specificity and provide a basis for its prediction from sequence. Copyright © 2015 Elsevier Ltd. All rights reserved.

Comparison of Saccharomyces cerevisiae F-BAR Domain Structures Reveals a Conserved Inositol Phosphate Binding Site

DOE PAGES

Moravcevic, Katarina; Alvarado, Diego; Schmitz, Karl R.; ...

2015-01-22

F-BAR domains control membrane interactions in endocytosis, cytokinesis, and cell signaling. Although they are generally thought to bind curved membranes containing negatively charged phospholipids, numerous functional studies argue that differences in lipid-binding selectivities of F-BAR domains are functionally important. Here in this paper, we compare membrane-binding properties of the Saccharomyces cerevisiae F-BAR domains in vitro and in vivo. Whereas some F-BAR domains (such as Bzz1p and Hof1p F-BARs) bind equally well to all phospholipids, the F-BAR domain from the RhoGAP Rgd1p preferentially binds phosphoinositides. We determined X-ray crystal structures of F-BAR domains from Hof1p and Rgd1p, the latter bound tomore » an inositol phosphate. The structures explain phospholipid-binding selectivity differences and reveal an F-BAR phosphoinositide binding site that is fully conserved in a mammalian RhoGAP called Gmip and is partly retained in certain other F-BAR domains. In conclusion, our findings reveal previously unappreciated determinants of F-BAR domain lipid-binding specificity and provide a basis for its prediction from sequence.« less

Changes in smoking-related norms in bars resulting from California's Smoke-Free Workplace Act.

PubMed

Satterlund, Travis D; Lee, Juliet P; Moore, Roland S

2012-01-01

California's Smoke-Free Workplace Act--CA Labor Code Sec. 6404.5(a)--was extended to bars in 1998. This article analyzes changes in normative beliefs and behaviors related to bar smoking in the decade following the adoption of the Act. In a series of studies evaluating the smoke-free workplace law in bars, researchers conducted extensive observations and interviews with bar staff and patrons, health officials, and law enforcement personnel in three California counties. Smoking outside became a normal pause in the social environment and created a new type of bar socializing for outside smokers. Although some bar owners and staff reported initially resenting the responsibility to uphold the law, once norms regarding cigarettes and smoking began changing, bar workers experienced less conflict in upholding the law. Non-smoking behavior within bars also became the normative behavior for bar patrons. California's Smoke-Free Workplace Act has both reflected and encouraged normative beliefs and behaviors related to smoking in bars. The findings indicate that such shifts are possible even in contexts where smoking behaviors and attitudes supporting smoking were deeply entrenched. Recommendations include attending to the synergistic effect of education and policy in effective tobacco control programs.

Bar dimensions and bar shapes in estuaries

NASA Astrophysics Data System (ADS)

Leuven, Jasper; Kleinhans, Maarten; Weisscher, Steven; van der Vegt, Maarten

2016-04-01

Estuaries cause fascinating patterns of dynamic channels and shoals. Intertidal sandbars are valuable habitats, whilst channels provide access to harbors. We still lack a full explanation and classification scheme for the shapes and dimensions of bar patterns in natural estuaries, in contrast with bars in rivers. Analytical physics-based models suggest that bar length in estuaries increases with flow velocity, tidal excursion length or estuary width, depending on which model. However, these hypotheses were never validated for lack of data and experiments. We present a large dataset and determine the controls on bar shape and dimensions in estuaries, spanning bar lengths from centimeters (experiments) to 10s of kilometers length. First, we visually identified and classified 190 bars, measured their dimensions (width, length, height) and local braiding index. Data on estuarine geometry and tidal characteristics were obtained from governmental databases and literature on case studies. We found that many complex bars can be seen as simple elongated bars partly cut by mutually evasive ebb- and flood-dominated channels. Data analysis shows that bar dimensions scale with estuary dimensions, in particular estuary width. Breaking up the complex bars in simple bars greatly reduced scatter. Analytical bar theory overpredicts bar dimensions by an order of magnitude in case of small estuarine systems. Likewise, braiding index depends on local width-to-depth ratio, as was previously found for river systems. Our results suggest that estuary dimensions determine the order of magnitude of bar dimensions, while tidal characteristics modify this. We will continue to model bars numerically and experimentally. Our dataset on tidal bars enables future studies on the sedimentary architecture of geologically complex tidal deposits and enables studying effects of man-induced perturbations such as dredging and dumping on bar and channel patterns and habitats.

Applicability of Thermal Storage Systems to Air Force Facilities

DTIC Science & Technology

1990-09-01

Analisis of Region 6 Upper Limit Retrofit Scenario 30% Reduction .... ............. 4.52 4.58 Economic Analysis of Region 7 Upper Limit Retrofit Scenario...or a dynamic-direct contact type. They usually include all the controls, chilling and storage equipment in one self-contained, skid mounted, factory ...SCS technology. One promising trend in reducing system construction costs is the factory -packaged thermal storage cooling unit. As of February 1989

Testing of a Spray-bar Thermodynamic Vent System in Liquid Nitrogen

NASA Technical Reports Server (NTRS)

Flachbart, R. H.; Hastings, L. J.; Hedayat, A.; Nelson, S. L.; Tucker, S. P.

2005-01-01

To support development of a microgravity pressure control capability for liquid oxygen, thermodynamic vent system (TVS) testing was conducted at Marshall Space Flight Center (MSFC) using liquid nitrogen (LN2) as a LOX simulant. The spray bar TVS hardware used was originally designed by the Boeing Company for testing in liquid hydrogen (LH2). With this concept, a small portion of the tank fluid is passed through a Joule-Thomson (J-T) device, and then through a longitudinal spray bar mixed-heat exchanger in order to cool the bulk fluid. To accommodate the larger mass flow rates associated with LN2, the TVS hardware was modified by replacing the recirculation pump with an LN2 compatible pump and replacing the J-T valve. The primary advantage of the spray-bar configuration is that tank pressure control can be achieved independent of liquid and vapor location, enhancing the applicability of ground test data to microgravity conditions. Performance testing revealed that the spray-bar TVS was effective in controlling tank pressure within a 6.89 kPa band for fill levels of 90%, 50%, and 25%. Tests were also conducted with gaseous helium (GHe) in the ullage. The TVS operated nominally with GHe in the ullage, with performance similar to the tests with gaseous nitrogen (GN2). Testing demonstrated that the spray-bar TVS design was flexible enough for use in two different propellants with minimal hardware modifications.

Unintended Consequences of Smoke-Free Bar Policies for Low-SES Women in Three California Counties

PubMed Central

Moore, Roland S.; Annechino, Rachelle M.; Lee, Juliet P.

2009-01-01

Background To amplify earlier studies of unintended consequences of public policies, this article illustrates both negative and positive unanticipated consequences of smoke-free workplace policies in California bars for women of low SES. Methods The article relies on thematic analysis in 2008 of qualitative data gathered between 2001 and 2007 from three mixed-method studies of tobacco use in and around bars where indoor smoking is prohibited. Results Unanticipated consequences primarily occurred when bars did comply with the law and smokers went outside the bar to smoke, particularly when smokers stood on the street outside the bar. Key negative consequences for women who smoked outside of bars included threats to their physical safety and their public image. For women living near bars, increased smoking on the street may have increased their exposure to secondhand smoke and disruptive noise. For some women, however, unanticipated negative consequences were identified with noncompliant bars. Smokers were conjectured to congregate in the smaller number of bars where smoking was still allowed, resulting in increased exposure to secondhand smoke for low-SES women working in these bars. A common positive unintended consequence of the tobacco control ordinance was increased social circulation and solidarity, as smokers gathered outside bars to smoke. Conclusions Smoke-free workplace laws in bars can have both negative and positive consequences for workers and smokers, and low-income women in particular. PMID:19591753

Unintended consequences of smoke-free bar policies for low-SES women in three California counties.

PubMed

Moore, Roland S; Annechino, Rachelle M; Lee, Juliet P

2009-08-01

To amplify earlier studies of unintended consequences of public policies, this article illustrates both negative and positive unanticipated consequences of smoke-free workplace policies in California bars for women of low SES. The article relies on thematic analysis in 2008 of qualitative data gathered between 2001 and 2007 from three mixed-method studies of tobacco use in and around bars where indoor smoking is prohibited. Unanticipated consequences primarily occurred when bars did comply with the law and smokers went outside the bar to smoke, particularly when smokers stood on the street outside the bar. Key negative consequences for women who smoked outside of bars included threats to their physical safety and their public image. For women living near bars, increased smoking on the street may have increased their exposure to secondhand smoke and disruptive noise. For some women, however, unanticipated negative consequences were identified with noncompliant bars. Smokers were conjectured to congregate in the smaller number of bars where smoking was still allowed, resulting in increased exposure to secondhand smoke for low-SES women working in these bars. A common positive unintended consequence of the tobacco control ordinance was increased social circulation and solidarity, as smokers gathered outside bars to smoke. Smoke-free workplace laws in bars can have both negative and positive consequences for workers and smokers, and low-income women in particular.

78 FR 59712 - Notice of Availability of the Draft Environmental Impact Statement for the 3 Bars Ecosystem and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-27

... treatment methods would include manual, mechanical, and biological control treatments, prescribed fire or wildland fire for resource benefit, and other management actions. In order to implement the proposed 3 Bars... enhancement, fire and fuels management, control of weeds, woodland and rangeland values, wetland and riparian...

Effect of a viscous fiber bar on postprandial glycemia in subjects with type 2 diabetes.

PubMed

Flammang, Ann M; Kendall, David M; Baumgartner, C John; Slagle, Trish D; Choe, Yong S

2006-10-01

To compare the effect of an experimental viscous fiber (VF) crispy bar on the postprandial glucose, insulin, and C-peptide response in adult subjects with type 2 diabetes to two commercially available control crispy bars. The study was a randomized, double-blinded, three period, crossover study. The study was conducted at two sites: Park Nicollet Institute, International Diabetes Center, Minneapolis, MN, and Radiant Research, Inc., Minneapolis, MN. A total of 60 adults with type 2 diabetes taking oral antihyperglycemic medication participated in the study. After an overnight fast, subjects consumed a test meal containing an equicaloric amount (300 kcal) of an experimental VF crispy bar or one of two commercially available crispy bars at each of three test visits, followed by a four hour meal tolerance test. Subjects also completed gastrointestinal (GI) response records for the 24 hours following each test visit. The VF crispy bars produced significantly lower glucose (p < 0.0001), insulin (p < 0.0001), and C-peptide (p < 0.0001) responses (as measured by positive area under the curve) in subjects with type 2 diabetes, as compared with the two commercially available bars. Intensity (p < 0.05) and frequency (p < 0.05) of flatulence were significantly higher with the VF bar as compared with the 2 commercial bars. While the VF bar produced significant subjective GI tolerance scoring values, the mean value was below 3 on a scale of 0 (no effect) to 10 (most severe effect) for all tested materials. The incorporation of VF into a crispy bar provided a means to improve blood glucose levels by reducing postprandial glucose, insulin, and C-peptide responses in subjects with type 2 diabetes. Though associated with some GI symptoms, VF may have application in improving the postprandial glycemic response in people with diabetes attempting intensive glucose control.

Law in practice: Obstacles to a smokefree workplace policy in bars serving Asian patrons

PubMed Central

2010-01-01

The California smokefree workplace ordinance (AB13) has been well-received, even in bars where deeply-established traditions of smoking may exist. However, a closer investigation of bars where indoor smoking persists reveals that bar workers in some immigrant communities continue to be exposed to secondhand smoke in their workplaces. To identify sociocultural factors that may impede the adoption of AB13, 150 observations and 29 qualitative interviews were conducted in 50 California bars serving Asian patrons. Observers witnessed indoor smoking in 82% of the bars. Interviews revealed that social relationships, social interactions, and confrontation avoidance complicated the positive reception of AB13 within these bars. By understanding the implications of sociocultural factors on policy, we provide a nuanced understanding of the challenges involved in implementing tobacco control policy in diverse settings, which may help inform future policy development and implementation in other jurisdictions. PMID:18712482

Coordinated autoinhibition of F-BAR domain membrane binding and WASp activation by Nervous Wreck.

PubMed

Stanishneva-Konovalova, Tatiana B; Kelley, Charlotte F; Eskin, Tania L; Messelaar, Emily M; Wasserman, Steven A; Sokolova, Olga S; Rodal, Avital A

2016-09-20

Membrane remodeling by Fes/Cip4 homology-Bin/Amphiphysin/Rvs167 (F-BAR) proteins is regulated by autoinhibitory interactions between their SRC homology 3 (SH3) and F-BAR domains. The structural basis of autoregulation, and whether it affects interactions of SH3 domains with other cellular ligands, remain unclear. Here we used single-particle electron microscopy to determine the structure of the F-BAR protein Nervous Wreck (Nwk) in both soluble and membrane-bound states. On membrane binding, Nwk SH3 domains do not completely dissociate from the F-BAR dimer, but instead shift from its concave surface to positions on either side of the dimer. Unexpectedly, along with controlling membrane binding, these autoregulatory interactions inhibit the ability of Nwk-SH3a to activate Wiskott-Aldrich syndrome protein (WASp)/actin related protein (Arp) 2/3-dependent actin filament assembly. In Drosophila neurons, Nwk autoregulation restricts SH3a domain-dependent synaptopod formation, synaptic growth, and actin organization. Our results define structural rearrangements in Nwk that control F-BAR-membrane interactions as well as SH3 domain activities, and suggest that these two functions are tightly coordinated in vitro and in vivo.

Spectroscopy of snake states using a graphene Hall bar

DOE Office of Scientific and Technical Information (OSTI.GOV)

Milovanović, S. P., E-mail: slavisa.milovanovic@gmail.com; Ramezani Masir, M., E-mail: mrmphys@gmail.com; Peeters, F. M., E-mail: francois.peeters@ua.ac.be

2013-12-02

An approach to observe snake states in a graphene Hall bar containing a pn-junction is proposed. The magnetic field dependence of the bend resistance in a ballistic graphene Hall bar structure containing a tilted pn-junction oscillates as a function of applied magnetic field. We show that each oscillation is due to a specific snake state that moves along the pn-interface. Furthermore, depending on the value of the magnetic field and applied potential, we can control the lead in which the electrons will end up and hence control the response of the system.

Implementation of a workplace smoking ban in bars: the limits of local discretion.

PubMed

Montini, Theresa; Bero, Lisa A

2008-12-08

In January 1998, the California state legislature extended a workplace smoking ban to bars. The purpose of this study was to explore the conditions that facilitate or hinder compliance with a smoking ban in bars. We studied the implementation of the smoking ban in bars by interviewing three sets of policy participants: bar employers responsible for complying with the law; local government officials responsible for enforcing the law; and tobacco control activists who facilitated implementation. We transcribed the interviews and did a qualitative analysis of the text. The conditions that facilitated bar owners' compliance with a smoking ban in bars included: if the cost to comply was minimal; if the bars with which they were in competition were in compliance with the smoking ban; and if there was authoritative, consistent, coordinated, and uniform enforcement. Conversely, the conditions that hindered compliance included: if the law had minimal sanctions; if competing bars in the area allowed smoking; and if enforcement was delayed or inadequate. Many local enforcers wished to forfeit their local discretion and believed the workplace smoking ban in bars would be best implemented by a state agency. The potential implication of this study is that, given the complex nature of local politics, smoking bans in bars are best implemented at a broader provincial or national level.

Changes in Smoking-Related Norms in Bars Resulting from California’s Smoke-Free Workplace Act*

PubMed Central

Satterlund, Travis D.; Lee, Juliet P.; Moore, Roland S.

2013-01-01

California’s Smoke-Free Workplace Act— CA Labor Code Sec. 6404.5(a)—was extended to bars in 1998. This paper analyzes changes in normative beliefs and behaviors related to bar smoking in the decade following the adoption of the Act. In a series of studies evaluating the smoke-free workplace law in bars, researchers conducted extensive observations and interviews with bar staff and patrons, health officials, and law enforcement personnel in three California counties. Smoking outside became a normal pause in the social environment and created a new type of bar socializing for outside smokers. Although some bar owners and staff reported initially resenting the responsibility to uphold the law, once norms regarding cigarettes and smoking began changing, bar workers experienced less conflict in upholding the law. Non-smoking behavior within bars also became the normative behavior for bar patrons. California’s Smoke-Free Workplace Act has both reflected and encouraged normative beliefs and behaviors related to smoking in bars. The findings indicate that such shifts are possible even in contexts where smoking behaviors and attitudes supporting smoking were deeply entrenched. Recommendations include attending to the synergistic effect of education and policy in effective tobacco control programs. PMID:23705511

Behaviour of smart reinforced concrete beam with super elastic shape memory alloy subjected to monotonic loading

NASA Astrophysics Data System (ADS)

Hamid, Nubailah Abd; Ibrahim, Azmi; Adnan, Azlan; Ismail, Muhammad Hussain

2018-05-01

This paper discusses the superelastic behavior of shape memory alloy, NiTi when used as reinforcement in concrete beams. The ability of NiTi to recover and reduce permanent deformations of concrete beams was investigated. Small-scale concrete beams, with NiTi reinforcement were experimentally investigated under monotonic loads. The behaviour of simply supported reinforced concrete (RC) beams hybrid with NiTi rebars and the control beam subject to monotonic loads were experimentally investigated. This paper is to highlight the ability of the SMA bars to recover and reduce permanent deformations of concrete flexural members. The size of the control beam is 125 mm × 270 mm × 1000 mm with 3 numbers of 12 mm diameter bars as main reinforcement for compression and 3 numbers of 12 mm bars as tension or hanger bars while 6 mm diameter at 100 mm c/c used as shear reinforcement bars for control beam respectively. While, the minimal provision of 200mm using the 12.7mm of superelastic Shape Memory Alloys were employed to replace the steel rebar at the critical region of the beam. In conclusion, the contribution of the SMA bar in combination with high-strength steel to the conventional reinforcement showed that the SMA beam has exhibited an improve performance in term of better crack recovery and deformation. Therefore the usage of hybrid NiTi with the steel can substantially diminish the risk of the earthquake and also can reduce the associated cost aftermath.

Barbell-shaped stir bar sorptive extraction using dummy template molecularly imprinted polymer coatings for analysis of bisphenol A in water.

PubMed

Liu, Ruimei; Feng, Feng; Chen, Guolin; Liu, Zhimin; Xu, Zhigang

2016-07-01

This study reports the development of a novel dummy template molecularly imprinted polymer (MIP)-coated barbell-shaped stir bar. The MIP stir bar coatings were prepared by using 2,2-bis(4-hydroxyphenyl)butane (BPB), 4,4'-dihydroxydiphenylmethane (BPF), 4-tert-butylphenol (PTBP), and tetrabromobisphenol A (TBBA) as dummy templates using a capillary in situ polymerization method. Uniform coatings can be prepared controllably. The method is simple, easy, and reproducible. The barbell-shaped stir bar was developed by using medical silicone tubes as wheels. The wheels could be removed and reinstalled when necessary; therefore, the barbell-shaped stir bar was easy to disassemble and reassemble. The novel MIP-coated stir bar showed good selectivity for the target analyte, bisphenol A (BPA). The established method is selective and sensitive with a lower detection limit for BPA of 0.003 μg/L. The dummy template MIP-coated stir bar is suitable for trace BPA analysis in real environmental water samples without template leakage. The novel stir bar can be used at least 100 times.

Implementation of a workplace smoking ban in bars: The limits of local discretion

PubMed Central

Montini, Theresa; Bero, Lisa A

2008-01-01

Background In January 1998, the California state legislature extended a workplace smoking ban to bars. The purpose of this study was to explore the conditions that facilitate or hinder compliance with a smoking ban in bars. Methods We studied the implementation of the smoking ban in bars by interviewing three sets of policy participants: bar employers responsible for complying with the law; local government officials responsible for enforcing the law; and tobacco control activists who facilitated implementation. We transcribed the interviews and did a qualitative analysis of the text. Results The conditions that facilitated bar owners' compliance with a smoking ban in bars included: if the cost to comply was minimal; if the bars with which they were in competition were in compliance with the smoking ban; and if there was authoritative, consistent, coordinated, and uniform enforcement. Conversely, the conditions that hindered compliance included: if the law had minimal sanctions; if competing bars in the area allowed smoking; and if enforcement was delayed or inadequate. Conclusion Many local enforcers wished to forfeit their local discretion and believed the workplace smoking ban in bars would be best implemented by a state agency. The potential implication of this study is that, given the complex nature of local politics, smoking bans in bars are best implemented at a broader provincial or national level. PMID:19063716

Design criteria for panic bars and auger miner safety. Panic bar study. Volume 1. Continuous miners. Open file report (final), 1973-74

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marrus, L.D.; Rogne, C.

1974-01-23

The panic bars (and associated linkages and electrical circuitry) that are defined in this document are a machine operator-actuated control for the emergency deenergization of the tram motors on self-propelled, electric and diesel face equipment, including haulage equipment such as shuttle cars. There are nine basic types of panic bars (and several variations) that are recommended in this document, but all of the panic bars are characteristically of the ''fire door'' type that is frequently encountered on outside exit doors of many public and some commercial buildings. It is also the intent of the following panic bar designs that, whenmore » emergency brakes are added to the face equipment machinery for which they are required, that they be designed and hooked up so that actuation of the panic bar will result in automatic application of the emergency brakes (immediately following the deenergization of the tram motors). (GRA)« less

Law in practice: obstacles to a smokefree workplace policy in bars serving Asian patrons.

PubMed

Antin, Tamar M J; Moore, Roland S; Lee, Juliet P; Satterlund, Travis D

2010-04-01

The California smokefree workplace ordinance (AB13) has been well-received, even in bars where deeply established traditions of smoking may exist. However, a closer investigation of bars where indoor smoking persists revealed that bar workers in some ethnic minority communities continue to be exposed to secondhand smoke in their workplaces. To identify sociocultural factors that may impede the adoption of AB13, the researchers conducted 150 observations and 29 patron and staff interviews in 50 California bars serving Asian patrons in Los Angeles and San Francisco counties. Observers witnessed indoor smoking in 82% of the bars. Interviews revealed that social relationships, social interactions, and a tendency to avoid confrontation complicated the positive reception of AB13 within these bars. Accounting for sociocultural factors provides a nuanced understanding of the challenges involved in implementing tobacco control policy in such diverse settings and may allow for culturally appropriate tobacco policy development and implementation in other jurisdictions.

Icing research tunnel rotating bar calibration measurement system

NASA Technical Reports Server (NTRS)

Gibson, Theresa L.; Dearmon, John M.

1993-01-01

In order to measure icing patterns across a test section of the Icing Research Tunnel, an automated rotating bar measurement system was developed at the NASA Lewis Research Center. In comparison with the previously used manual measurement system, this system provides a number of improvements: increased accuracy and repeatability, increased number of data points, reduced tunnel operating time, and improved documentation. The automated system uses a linear variable differential transformer (LVDT) to measure ice accretion. This instrument is driven along the bar by means of an intelligent stepper motor which also controls data recording. This paper describes the rotating bar calibration measurement system.

Dry Skin

MedlinePlus

... bars such as Neutrogena ® ) instead of harsh true “soaps.” Detergents are not the same as soap and are not necessarily bad; in fact, most bath bars are detergents and not soaps. Often, detergents are able to control the acid/ ...

Bar represses dPax2 and decapentaplegic to regulate cell fate and morphogenetic cell death in Drosophila eye.

PubMed

Kang, Jongkyun; Yeom, Eunbyul; Lim, Janghoo; Choi, Kwang-Wook

2014-01-01

The coordinated regulation of cell fate and cell survival is crucial for normal pattern formation in developing organisms. In Drosophila compound eye development, crystalline arrays of hexagonal ommatidia are established by precise assembly of diverse cell types, including the photoreceptor cells, cone cells and interommatidial (IOM) pigment cells. The molecular basis for controlling the number of cone and IOM pigment cells during ommatidial pattern formation is not well understood. Here we present evidence that BarH1 and BarH2 homeobox genes are essential for eye patterning by inhibiting excess cone cell differentiation and promoting programmed death of IOM cells. Specifically, we show that loss of Bar from the undifferentiated retinal precursor cells leads to ectopic expression of Prospero and dPax2, two transcription factors essential for cone cell specification, resulting in excess cone cell differentiation. We also show that loss of Bar causes ectopic expression of the TGFβ homolog Decapentaplegic (Dpp) posterior to the morphogenetic furrow in the larval eye imaginal disc. The ectopic Dpp expression is not responsible for the formation of excess cone cells in Bar loss-of-function mutant eyes. Instead, it causes reduction in IOM cell death in the pupal stage by antagonizing the function of pro-apoptotic gene reaper. Taken together, this study suggests a novel regulatory mechanism in the control of developmental cell death in which the repression of Dpp by Bar in larval eye disc is essential for IOM cell death in pupal retina.

BarA-UvrY two-component system regulates virulence of uropathogenic E. coli CFT073.

PubMed

Palaniyandi, Senthilkumar; Mitra, Arindam; Herren, Christopher D; Lockatell, C Virginia; Johnson, David E; Zhu, Xiaoping; Mukhopadhyay, Suman

2012-01-01

Uropathogenic Escherichia coli (UPEC), a member of extraintestinal pathogenic E. coli, cause ∼80% of community-acquired urinary tract infections (UTI) in humans. UPEC initiates its colonization in epithelial cells lining the urinary tract with a complicated life cycle, replicating and persisting in intracellular and extracellular niches. Consequently, UPEC causes cystitis and more severe form of pyelonephritis. To further understand the virulence characteristics of UPEC, we investigated the roles of BarA-UvrY two-component system (TCS) in regulating UPEC virulence. Our results showed that mutation of BarA-UvrY TCS significantly decreased the virulence of UPEC CFT073, as assessed by mouse urinary tract infection, chicken embryo killing assay, and cytotoxicity assay on human kidney and uroepithelial cell lines. Furthermore, mutation of either barA or uvrY gene reduced the production of hemolysin, lipopolysaccharide (LPS), proinflammatory cytokines (TNF-α and IL-6) and chemokine (IL-8). The virulence phenotype was restored similar to that of wild-type by complementation of either barA or uvrY gene in trans. In addition, we discussed a possible link between the BarA-UvrY TCS and CsrA in positively and negatively controlling virulence in UPEC. Overall, this study provides the evidences for BarA-UvrY TCS regulates the virulence of UPEC CFT073 and may point to mechanisms by which virulence regulations are observed in different ways may control the long-term survival of UPEC in the urinary tract.

Emission wavelength tuning of fluorescence by fine structural control of optical metamaterials with Fano resonance

PubMed Central

Moritake, Y.; Kanamori, Y.; Hane, K.

2016-01-01

We demonstrated fine emission wavelength tuning of quantum dot (QD) fluorescence by fine structural control of optical metamaterials with Fano resonance. An asymmetric-double-bar (ADB), which was composed of only two bars with slightly different bar lengths, was used to obtain Fano resonance in the optical region. By changing the short bar length of ADB structures with high dimensional accuracy in the order of 10 nm, resonant wavelengths of Fano resonance were controlled from 1296 to 1416 nm. Fluorescence of QDs embedded in a polymer layer on ADB metamaterials were modified due to coupling to Fano resonance and fine tuning from 1350 to 1376 nm was observed. Wavelength tuning of modified fluorescence was reproduced by analysis using absorption peaks of Fano resonance. Tuning range of modified fluorescence became narrow, which was interpreted by a simple Gaussian model and resulted from comparable FWHM in QD fluorescence and Fano resonant peaks. The results will help the design and fabrication of metamaterial devices with fluorophores such as light sources and biomarkers. PMID:27622503

Effect of Electrical Stimulation on Beta-Adrenergic Receptor Population and Coupling Efficiency in Chicken and Rat Skeleton Muscle Cell Cultures

NASA Technical Reports Server (NTRS)

Young, Ronald B.; Bridge, Kristin Y.; Strietzel, Catherine J.

1999-01-01

Expression of the beta-adrenergic receptor (bAR) and its coupling to cyclic AMP (cAMP) synthesis are important components of the signaling system that controls muscle atrophy and hypertrophy, and the goal of this study was to determine if electrical stimulation in a pattern simulating slow muscle contraction would alter the bAR response in primary cultures of avian and mammalian skeletal muscle cells. Specifically, chicken skeletal muscle cells and rat skeletal muscle cells that had been grown for seven days in culture were subjected to electrical stimulation for an additional two days at a pulse frequency of 0.5 pulses/sec and a pulse duration of 200 msec. In chicken skeletal muscle cells, the bAR population was not significantly affected by electrical stimulation; however, the ability of these cells to synthesize cyclic AMP was reduced by approximately one-half. Thus, in chicken muscle cells an enhanced level of contraction reduced the coupling efficiency of bAR for cyclic AMP production by approximately 55% compared to controls. In contrast, the bAR population in rat muscle cells was increased by approximately 25% by electrical stimulation, and the ability of these cells to synthesize cyclic AMP was also increased by almost two-fold. Thus, in rat muscle cells an enhanced level of contraction increased the coupling efficiency of bAR for cyclic AMP production by approximately 50% compared to controls. The basal levels of intracellular cyclic AMP in both rat muscle cells and chicken muscle cells were not affected by electrical stimulation.

A randomised crossover trial of the acute effects of a deep-fried Mars bar or porridge on the cerebral vasculature.

PubMed

Dunn, William G; Walters, Matthew R

2014-11-01

The deep-fried Mars bar has been cited as 'all that is wrong with the high-fat, high-sugar Scottish diet'. We investigated the effect of ingestion of a deep-fried Mars bar or porridge on cerebrovascular reactivity. We hypothesised that deep-fried Mars bar ingestion would impair cerebrovascular reactivity, which is associated with increased risk of ischaemic stroke. Twenty-four fasted volunteers were randomised to receive a deep-fried Mars bar and then porridge (control), or vice-versa. We used transcranial Doppler ultrasound to calculate Breath Holding Index as a surrogate measure of cerebrovascular reactivity. Change in Breath Holding Index post-ingestion was the primary outcome measure. Twenty-four healthy adults (mean (SD) age 21.5 (1.7) years, 14 males) completed the protocol. Deep-fried Mars bar ingestion caused a non-significant reduction in cerebrovascular reactivity relative to control (mean difference in absolute Breath Holding Index after deep-fried Mars bar versus porridge -0.11, p = 0.40). Comparison of the difference between the absolute change in Breath Holding Index between genders demonstrated a significant impairment of cerebrovascular reactivity in males (mean difference women minus men of 0.65, 95% CI 0.30 to 1.00, p = 0.0003). Ingestion of a bolus of sugar and fat caused no overall difference in cerebrovascular reactivity, but there was a modest decrease in males. Impaired cerebrovascular reactivity is associated with increased stroke risk, and therefore deep-fried Mars bar ingestion may acutely contribute to cerebral hypoperfusion in men. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Morphological Differences Between Seyfert Hosts and Normal Galaxies

NASA Astrophysics Data System (ADS)

Shlosman, Isaac

Using new sub-arcsecond resolution imaging we compare large-scale stellar bar fraction in CfA sample of Seyferts and a closely matched control sample of normal galaxies. We find a difference between the samples on the 2.5σ level. We further compare the axial ratios of bars in all available samples quoted in the literature and find a deficiency of small axial ratio bars in Seyferts compared to normal galaxies.

Self-Tuning Methods for Multiple-Controller Systems.

DTIC Science & Technology

1981-08-01

the model. The plant is governed by y(t) + Aly (t-l) - B 0u(t-l) + e(t) - where -0.99101 8.80512 x 103 A1 i.. "+-0.80610 -0.77089 -0.89889 -4.59328 x 10...AC-19, No. 5, Oct. 1974, pp. 518-524. [8 Bar- Shalom , Y. and Tse, E., "Dual Effect, Certainty Equivalence and Separation in Stochastic Control," IEEE...Trans. on Automatic Control, Vol. AC-19, No. 5, Oct. 1974, pp. 494-500. [9) Bar- Shalom , Y. and Tse, E., "Concepts and Methods in Stochastic Control

Elaborazione dei dati sperimentali

NASA Astrophysics Data System (ADS)

Dapor, M.; Ropele, M.

L'analisi statistica dei dati sperimentali, la loro elaborazione ed una corretta stima degli errori sono conoscenze necessarie agli studenti di fisica, biologia, chimica, ingegneria e dei corsi di specializzazione tecnico-scientifici in cui a di laboratorio. Chi si occupa di problemi tecnici e di misure, per studio o per lavoro, deve possedere gli strumenti matematici di calcolo e di analisi necessari ad una corretta interpretazione dei dati sperimentali. Il testo fornisce in modo sintetico, chiaro ed esaustivo, tutte le nozioni e le conoscenze utili allo scopo.

External push and internal pull forces recruit curvature sensing N-BAR domain proteins to the plasma membrane

PubMed Central

Galic, Milos; Jeong, Sangmoo; Tsai, Feng-Chiao; Joubert, Lydia-Marie; Wu, Yi I.; Hahn, Klaus M.; Cui, Yi; Meyer, Tobias

2012-01-01

Many of the more than 20 mammalian proteins with N-BAR domains1-2 control cell architecture3 and endocytosis4-5 by associating with curved sections of the plasma membrane (PM)6. It is not well understood whether N-BAR proteins are recruited directly by processes that mechanically curve the PM or indirectly by PM-associated adaptor proteins that recruit proteins with N-BAR domains that then induce membrane curvature. Here, we show that externally-induced inward deformation of the PM by cone-shaped nanostructures (Nanocones) and internally-induced inward deformation by contracting actin cables both trigger recruitment of isolated N-BAR domains to the curved PM. Markedly, live-cell imaging in adherent cells showed selective recruitment of full length N-BAR proteins and isolated N-BAR domains to PM sub-regions above Nanocone stripes. Electron microscopy confirmed that N-BAR domains are recruited to local membrane sites curved by Nanocones. We further showed that N-BAR domains are periodically recruited to curved PM sites during local lamellipodia retraction in the front of migrating cells. Recruitment required Myosin II-generated force applied to PM connected actin cables. Together, our study shows that N-BAR domains can be directly recruited to the PM by external push or internal pull forces that locally curve the PM. PMID:22750946

Finite Element Analysis of IPS Empress II Ceramic Bridge Reinforced by Zirconia Bar

PubMed Central

Kermanshah, H.; Bitaraf, T.; Geramy, A.

2012-01-01

Objective: The aim of this study was to determine the effect of trenched zirconia bar on the von Mises stress distribution of IPS –Empress II core ceramics. Materials and Methods: The three-dimensional model including a three-unit bridge from the second premolar to the second molar was designed. The model was reinforced with zirconia bar (ZB), zirconia bar with vertical trench (VZB) and zirconia bar with horizontal trench (HZB) (cross sections of these bars were circular). The model without zirconia bar was designed as the control. The bridges were loaded by 200 N and 500 N on the occlusal surface at the middle of the pontic component and von Mises stresses were evaluated along a defined path. Results: In the connector area, von Mises stress in MPa were approximately identical in the specimens with ZB (at molar connector (MC): 4.75 and at premolar connector (PC): 6.40) and without ZB (MC: 5.50, PC: 6.68), and considerable differences were not recognized. Whereas, Von-Mises stress (MPa) in the specimens with horizontal trenched Zirconia bar (HZB) (MC: 3.91, PC: 2.44) and Vertical trenched Zirconia bar (VZB) (MC: 2.53, PC: 2.56) was decreased considerably. Conclusion: Embeded trenched zirconia bar could reinforce IPS-Empress II at the connector area which is a main failure region in all ceramic fixed partial dentures. PMID:23323181

Finite Element Analysis of IPS Empress II Ceramic Bridge Reinforced by Zirconia Bar.

PubMed

Kermanshah, H; Bitaraf, T; Geramy, A

2012-01-01

The aim of this study was to determine the effect of trenched zirconia bar on the von Mises stress distribution of IPS -Empress II core ceramics. The three-dimensional model including a three-unit bridge from the second premolar to the second molar was designed. The model was reinforced with zirconia bar (ZB), zirconia bar with vertical trench (VZB) and zirconia bar with horizontal trench (HZB) (cross sections of these bars were circular). The model without zirconia bar was designed as the control. The bridges were loaded by 200 N and 500 N on the occlusal surface at the middle of the pontic component and von Mises stresses were evaluated along a defined path. IN THE CONNECTOR AREA, VON MISES STRESS IN MPA WERE APPROXIMATELY IDENTICAL IN THE SPECIMENS WITH ZB (AT MOLAR CONNECTOR (MC): 4.75 and at premolar connector (PC): 6.40) and without ZB (MC: 5.50, PC: 6.68), and considerable differences were not recognized. Whereas, Von-Mises stress (MPa) in the specimens with horizontal trenched Zirconia bar (HZB) (MC: 3.91, PC: 2.44) and Vertical trenched Zirconia bar (VZB) (MC: 2.53, PC: 2.56) was decreased considerably. Embeded trenched zirconia bar could reinforce IPS-Empress II at the connector area which is a main failure region in all ceramic fixed partial dentures.

Effect of Bathroom Aids and Age on Balance Control During Bathing Transfers.

PubMed

King, Emily C; Novak, Alison C

Bathroom assistive devices are used to improve safety during bathing transfers, but biomechanical evidence to support clinical recommendations is lacking. This study evaluated the effectiveness of common bathroom aids in promoting balance control during bathing transfers. Twenty-six healthy adults (12 young, 14 older) stepped into and out of a slippery bathtub while using a vertical grab bar on the side wall, a horizontal grab bar on the back wall, a bath mat, a side wall touch, or no assistance. Balance control was characterized using center of pressure measures and showed greater instability for older adults. The vertical grab bar and wall touch resulted in the safest (best controlled) transfers. The bath mat provided improved balance control in the axis parallel to the bathtub rim but was equivalent to no assistance perpendicular to the rim, in the direction of obstacle crossing. These results can support clinical recommendations for safe bathing transfers. Copyright © 2017 by the American Occupational Therapy Association, Inc.

Structural design guidelines for concrete bridge decks reinforced with corrosion-resistant reinforcing bars.

DOT National Transportation Integrated Search

2014-10-01

This research program develops and validates structural design guidelines and details for concrete bridge decks with : corrosion-resistant reinforcing (CRR) bars. A two-phase experimental program was conducted where a control test set consistent : wi...

A bi-axial active boring tool for chatter mitigation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Redmond, J.M.; Barney, P.S.

This paper summarizes results of metal cutting tests using an actively damped boring bar to suppress regenerative chatter. PZT stack actuators were integrated into a commercially available two-inch diameter boring bar to suppress bending vibrations. Since the modified tool requires no specialized mounting hardware, it can be readily mounted on a variety of machines. A cutting test using the prototype bar to remove metal from a hardened steel workpiece verifies that the authors actively damped tool yields significant vibration reduction and improved surface finish as compared to the open-loop case. In addition, the overall performance of the prototype bar ismore » compared to that of an unmodified bar of pristine geometry, revealing that a significant enlargement of the stable machining envelope is obtained through application of feedback control.« less

Optimal control of parametric oscillations of compressed flexible bars

NASA Astrophysics Data System (ADS)

Alesova, I. M.; Babadzanjanz, L. K.; Pototskaya, I. Yu.; Pupysheva, Yu. Yu.; Saakyan, A. T.

2018-05-01

In this paper the problem of damping of the linear systems oscillations with piece-wise constant control is solved. The motion of bar construction is reduced to the form described by Hill's differential equation using the Bubnov-Galerkin method. To calculate switching moments of the one-side control the method of sequential linear programming is used. The elements of the fundamental matrix of the Hill's equation are approximated by trigonometric series. Examples of the optimal control of the systems for various initial conditions and different number of control stages have been calculated. The corresponding phase trajectories and transient processes are represented.

Controls on sinuosity in the sparsely vegetated Fossálar River, southern Iceland

NASA Astrophysics Data System (ADS)

Ielpi, Alessandro

2017-06-01

Vegetation exerts strong controls on fluvial sinuosity, providing bank stability and buffering surface runoff. These controls are manifest in densely vegetated landscapes, whereas sparsely vegetated fluvial systems have been so far overlooked. This study integrates remote sensing and gauging records of the meandering to wandering Fossálar River, a relatively steep-sloped (< 2.5%) Icelandic river featuring well-developed point bars (79%-85% of total active bar surface) despite the lack of thick, arborescent vegetation. Over four decades, fluctuations in the sinuosity index (1.15-1.43) and vegetation cover (63%-83%) are not significantly correlated (r = 0.28, p > 0.05), suggesting that relationships between the two are mediated by intervening variables and uncertain lag times. By comparison, discharge regime and fluvial planform show direct correlation over monthly to yearly time scales, with stable discharge stages accompanying the accretion of meander bends and peak floods related to destructive point-bar reworking. Rapid planform change is aided by the unconsolidated nature of unrooted alluvial banks, with recorded rates of lateral channel-belt migration averaging 18 m/yr. Valley confinement and channel mobility also control the geometry and evolution of individual point bars, with the highest degree of spatial geomorphic variability recorded in low-gradient stretches where lateral migration is unimpeded. Point bars in the Fossálar River display morphometric values comparable to those of other sparsely vegetated rivers, suggesting shared scalar properties. This conjecture prompts the need for more sophisticated integrations between remote sensing and gauging records on modern rivers lacking widespread plant life. While a large volume of experimental and field-based work maintains that thick vegetation has a critical role in limiting braiding, thus favouring sinuosity, this study demonstrates the stronger controls of discharge regime and alluvial morphology on sparsely vegetated sinuous rivers.

The BaLROG project - II. Quantifying the influence of bars on the stellar populations of nearby galaxies

NASA Astrophysics Data System (ADS)

Seidel, M. K.; Falcón-Barroso, J.; Martínez-Valpuesta, I.; Sánchez-Blázquez, P.; Pérez, I.; Peletier, R.; Vazdekis, A.

2016-08-01

We continue the exploration of the BaLROG (Bars in Low Redshift Optical Galaxies) sample: 16 large mosaics of barred galaxies observed with the integral field unit Spectrographic Areal Unit for Research on Optical Nebulae. We quantify the influence of bars on the composition of the stellar component. We derive line-strength indices of H β, Fe5015 and Mgb. Based on single stellar population (SSP) models, we calculate ages, metallicities and [Mg/Fe] abundances and their gradients along the bar major and minor axes. The high spatial resolution of our data allows us to identify breaks among index and SSP profiles, commonly at 0.13 ± 0.06 bar length, consistent with kinematic features. Inner gradients are about 10 times steeper than outer gradients and become larger when there is a central rotating component, implying that the gradients are not independent of dynamics and orbits. Central ages appear to be younger for stronger bars. Yet, the bar regions are usually old. We find a flattening of the iron (Fe5015) and magnesium (Mgb) outer gradients along the bar major axis, translating into a flattening of the metallicity gradient. This gradient is found to be 0.03 ± 0.07 dex kpc-1 along the bar major axis while the mean value of the bar minor axis compares well with that of an unbarred control sample and is significantly steeper, namely -0.20 ± 0.04 dex kpc-1. These results confirm recent simulations and discern the important localized influence of bars. The elevated [Mg/Fe] abundances of bars and bulges compared to the lower values of discs suggest an early formation, in particular for early-type galaxies.

The European Office of Aerospace Research and Development’s Small Satellite Propulsion System Research Program

DTIC Science & Technology

2000-04-12

Investigation S..showed that the pressure reading saturated at 13 bar (maximum limit) compared to 10 bar which the pressure switch should have...controlled to. It was concluded that the commercial grade pressure switch had failed and that the pressure Figure 5: Nitrous Oxide feed system control valve...firing on 11 th April 2000. The performance using a pressure switch to control a solenoid results of this firing are shown in Figure 7. valve giving

Proceedings of the 1993 Particle Accelerator Conference Held in Washington, DC on May 17-20, 1993. Volume 5

DTIC Science & Technology

1994-05-18

1801 Control System Architecture: The Standard and Non -Standard Models (Invited Paper) - M. E. Thuot, L. R. Dalesio, LANL...extracted beam intensity and feedback on lbe in lbe AGS, lbe non -linear space charge force can blow up lbe strength of lbe sextupole field to control lb...cromsings at the two experimental areas BO and DO, and bling the mas rnge accessible for discovery, a menu bar. In the menu bar there are controls to inject

Tunable reflecting terahertz filter based on chirped metamaterial structure

PubMed Central

Yang, Jing; Gong, Cheng; Sun, Lu; Chen, Ping; Lin, Lie; Liu, Weiwei

2016-01-01

Tunable reflecting terahertz bandstop filter based on chirped metamaterial structure is demonstrated by numerical simulation. In the metamaterial, the metal bars are concatenated to silicon bars with different lengths. By varying the conductivity of the silicon bars, the reflectivity, central frequency and bandwidth of the metamaterial could be tuned. Light illumination could be introduced to change the conductivity of the silicon bars. Numerical simulations also show that the chirped metamaterial structure is insensitive to the incident angle and polarization-dependent. The proposed chirped metamaterial structure can be operated as a tunable bandstop filter whose modulation depth, bandwidth, shape factor and center frequency can be controlled by light pumping. PMID:27941833

Analisis del contenido curricular de los Documentos Normativos del Programa de Ciencias en el area de biologia para la escuela superior del sistema de educacion publica de Puerto Rico: 1993-2012

NASA Astrophysics Data System (ADS)

Davila Montanez, Melissa

Esta investigacion de naturaleza cualitativa se ocupo de realizar un analisis de contenido documental de los Documentos Normativos del Programa de Ciencias en el area de biologia de la escuela superior del sistema de educacion publica de Puerto Rico del periodo 1993-2012. Los documentos analizados fueron: Guia Curricular, 1995; Marco Curricular, 2003; Estandares de Excelencia, 1996, 2000 y Estandares de Contenido y Expectativas de Grado, 2007. Se indago si hubo cambios en significados en los Componentes Estructurales: Naturaleza de la ciencia, Paradigmas para la ensenanza de la ciencia, Funcion del curriculo formal, Mision de la ensenanza de la ciencia; Contenidos, destrezas y competencias, Estrategias de ensenanza y Evaluacion/Assessment del aprendizaje. El analisis sugiere que no hubo cambios sustanciales en los significados de los Componentes Estructurales. Los documentos estudiados muestran mayormente caracteristicas similares, aunque los documentos mas recientes eran mas descriptivos, explicativos y especificos.

Fermentable fibers do not affect satiety or food intake by women who do not practice restrained eating.

PubMed

Karalus, Melinda; Clark, Michelle; Greaves, Kathryn A; Thomas, William; Vickers, Zata; Kuyama, Megumi; Slavin, Joanne

2012-09-01

Fiber is thought to enhance satiety, although not all fibers are equally effective. Colonic fermentation may influence satiety and food intake. To test the satiating properties of four isolated fibers added to chocolate crisp bars. Within-subject preload design with repeated measures. Each participant completed five conditions, presented in random order. Participants were 22 adult women who do not practice restrained eating (body mass index 18 to 29). The experimental conditions were four fiber treatments: 10 g oligofructose, inulin, soluble corn fiber, or resistant wheat starch in chocolate crisp bars. A no-added-fiber bar was evaluated as the control. The night before each treatment, participants consumed a dinner bar containing 10 g of the same fiber given the next morning. Repeated ratings of feelings related to hunger and fullness at the lunch meal were the main measures. Secondary outcomes included breath hydrogen and methane, gastrointestinal symptoms, energy consumed at an ad libitum lunch, and energy from 24-hour dietary recall. Mixed-effect linear models with random intercept for participants to model within-subject correlation. All treatments were well tolerated. No differences were found in subjective satiety during the morning or food intake at lunch or over 24 hours. The oligofructose bar produced the greatest increase in breath hydrogen, and the most bloating and flatulence symptoms. Functional fibers incorporated into chocolate bars at high fiber doses produce greater gastrointestinal symptoms than control, but do not alter satiety, hunger, or food intake compared with control in the short term. Copyright © 2012 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Impact of the Irish smoking ban on sales in bars using a large business-level data set from 1999 to 2007.

PubMed

Cornelsen, Laura; Normand, Charles

2014-09-01

Ireland introduced comprehensive smoke-free workplace legislation in 2004. This study evaluates the economic impact of the workplace smoking ban on the value of sales in bars. Data on the value of bar sales were derived from a large, nationally representative, annual business-level survey from 1999 to 2007. The economic impact of the smoking ban was evaluated according to geographical region and bar size. Analysis was based on an econometric model which controlled for background changes in population income and wealth and for investments made by the bars during this period. The overall impact of the Irish smoking ban on bar sales appears to be very small. The ban was associated with an increase in sales among medium to large bars in the Border-Midland-West (more rural) region of Ireland, and a small reduction in sales among large bars in the more urban, South-East region. We failed to find any evidence of a change in bar sales in the remaining categories studied. The results indicate that although some bars saw positive effects and some negative, the overall impact of the smoking ban on the value of sales in bars was negligible. These findings provide further supporting evidence that comprehensive smoke-free workplace legislation does not harm hospitality businesses while having positive health effects. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Method and apparatus to control the lateral motion of a long metal bar being formed by a mechanical process such as rolling or drawing

DOEpatents

Chang, Tzyy-Shuh [Ann Arbor, MI; Huang, Hsun-Hau [Ann Arbor, MI; Lin, Chang-Hung [Ypsilanti, MI

2011-01-04

An apparatus to control lateral motion of a bar moving along a guidance path includes a pair of rotatable hubs each having at least first and second rollers at locations around the perimeter of the hub. The first roller has a first retaining groove of a first radius and the second roller has a second groove of a second radius smaller than the first radius. Each hub further includes at least one guiding element located between the rollers with a guide channel extending in the outer surface. A mounting system allows the hubs to be rotated between first and second positions. In the first position the first rollers oppose each other forming a guideway having a first, enlarged diameter for capturing a free end of an approaching bar. In the second position the second rollers form a second, smaller diameter to match the actual size of the bar.

Stress-strain relationship of high-strength steel (HSS) reinforcing bars

NASA Astrophysics Data System (ADS)

Anggraini, Retno; Tavio, Raka, I. Gede Putu; Agustiar

2018-05-01

The introduction of High-Strength Steel (HSS) reinforcing bars in reinforced concrete members has gained much attention in recent years and led to many advantages such as construction timesaving. It is also more economical since it can reduce the amount of reinforcing steel bars used in concrete members which in turn alleviates the congestion of reinforcement. Up to present, the building codes, e.g. American Concrete Institute (ACI) 318M-14 and Standard National Indonesia (SNI) 2847:2013, still restrict the use of higher-strength steel reinforcing bars for concrete design up to Grade 420 MPa due to the possible suspected brittle behavior of concrete members. This paper evaluates the characteristics of stress-strain relationships of HSS bars if they are comparable to the characteristics of those of Grade 420 MPa. To achieve the objective of the study, a series of steel bars from various grades (420, 550, 650, and 700 MPa) was selected. Tensile tests of these steel samples were conducted under displacement-controlled mode to capture the complete stress-strain curves and particularly the post-yield response of the steel bars. The results indicate that all the steel bars tested had the actual yield strengths greater than the corresponding specified values. The stress-strain curves of HSS reinforcing bars (Grade 550, 650, and 700 MPa) performed slightly different characteristics with those of Grade 420 MPa.

Economic Impact of Smoke-Free Air Laws in North Dakota on Restaurants and Bars.

PubMed

Shafer, Paul R; Loomis, Brett R

2016-08-01

In late 2012, North Dakota expanded its statewide smoke-free air law to cover all restaurants and bars in the state. Several North Dakota communities also had local ordinances that prohibited smoking in restaurants and bars prior to the statewide law. Previous work found no effect of the initial statewide law or several local laws on restaurant and bar sales. Using quarterly county-level employment data from 1990 to 2014, we examined whether the expanded statewide law or pre-existing local laws were associated with significant changes in employment in restaurants and bars in North Dakota. Separate models were estimated for restaurant and bar employment using two methods of controlling for smoke-free air law coverage. We found no evidence of a significant association between employment in restaurants and bars in North Dakota and the expanded statewide law or pre-existing local laws. Prior employment levels in restaurants and bars and prevailing economic conditions were the main drivers of restaurant and bar employment, not smoke-free air laws. This study examines the economic impact of smoke-free air laws in North Dakota on restaurant and bar employment following the expansion of the statewide law in late 2012 to cover all restaurants and bars. We find no significant adverse effect of smoke-free air laws on restaurants and bars, consistent with results from previous studies conducted in North Dakota and throughout the United States. This study is the first to analyze the economic impact of smoke-free air laws in North Dakota on restaurant and bar employment following the 2012 expansion of the statewide law to cover all restaurants and bars. We find no evidence of a significant adverse effect of smoke-free air laws on restaurants and bars, consistent with results from previous studies conducted in North Dakota and throughout the United States. Prior employment levels and prevailing economic conditions proved to be the main drivers of restaurant and bar employment, not smoke-free air laws. © The Author 2016. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Age and Sex Differences in Controlled Force Exertion Measured by a Computing Bar Chart Target-Pursuit System

ERIC Educational Resources Information Center

Nagasawa, Yoshinori; Demura, Shinichi

2009-01-01

This study aimed to examine the age and sex differences in controlled force exertion measured by the bar chart display in 207 males (age 42.1 [plus or minus] 19.8 years) and 249 females (age 41.7 [plus or minus] 19.1 years) aged 15 to 86 years. The subjects matched their submaximal grip strength to changing demand values, which appeared as a…

Fast Fourier and discrete wavelet transforms applied to sensorless vector control induction motor for rotor bar faults diagnosis.

PubMed

Talhaoui, Hicham; Menacer, Arezki; Kessal, Abdelhalim; Kechida, Ridha

2014-09-01

This paper presents new techniques to evaluate faults in case of broken rotor bars of induction motors. Procedures are applied with closed-loop control. Electrical and mechanical variables are treated using fast Fourier transform (FFT), and discrete wavelet transform (DWT) at start-up and steady state. The wavelet transform has proven to be an excellent mathematical tool for the detection of the faults particularly broken rotor bars type. As a performance, DWT can provide a local representation of the non-stationary current signals for the healthy machine and with fault. For sensorless control, a Luenberger observer is applied; the estimation rotor speed is analyzed; the effect of the faults in the speed pulsation is compensated; a quadratic current appears and used for fault detection. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

Changes in alcohol policies and practices in bars and restaurants after completion of manager-focused responsible service training.

PubMed

Lenk, Kathleen M; Erickson, Darin J; Nelson, Toben F; Horvath, Keith J; Nederhoff, Dawn M; Hunt, Shanda L; Ecklund, Alexandra M; Toomey, Traci L

2018-03-01

Irresponsible and illegal serving practices at bars and restaurants, such as sales to obviously intoxicated patrons, can lead to various public health harms. Training managers of bars and restaurants in the development and promotion of responsible alcohol policies may help prevent risky and illegal alcohol serving practices. We implemented a training program for managers of bars/restaurants designed to establish and promote responsible beverage service policies/practices. The program included online and in-person components. Bars/restaurants were randomised to intervention (n = 171) and control (n = 163) groups. To assess changes in policies/practices, we surveyed managers prior to and at 1 and 6 months post-training. Logistic regression models assessed changes in policies/practices across time points. The proportion in the intervention group that had written alcohol policies increased from 62% to 95% by 6 months post-training while the control group increased from 65% to 79% (P < 0.05). Similarly, by 6 months post-training 70% of managers in the intervention group reported they had communicated to their staff how to cut off intoxicated patrons, a significant increase from baseline (37%) and from the change observed in the control group (43%-56%). Prevalence of other policies/practices also increased post-training but differences between intervention and control groups were not statistically significant. Our training program appears to have led to implementation of some policies/practices. Additional studies are needed to determine how training can be combined with other strategies to further improve establishment policies and ultimately reduce alcohol-related harms. © 2017 Australasian Professional Society on Alcohol and other Drugs.

Epidemiological evaluations of the efficacy of slow-released praziquantel-medicated bars for dogs in the prevention and control of cystic echinococcosis in man and animals.

PubMed

Wei, Jiao; Cheng, Fu; Qun, Qu; Nurbek; Xu, Shi-Dong; Sun, Li-Feng; Han, Xin-Kui; Muhan; Han, Ling-Ling; Irixiati; Jie, Peng; Zhang, Ke-Jiu; Islayin; Chai, Jun-jie

2005-12-01

To assess the epidemiological efficacy of type SRP III slow-released praziquantel-medicated bars for dogs in the prevention and control of cystic echinococcosis in man and livestock, praziquantel-medicated bars were implanted subcutaneously in over 90% of dogs in villages in north Xinjiang, China, where cystic echinococcosis is highly endemic. After implantation, infection rate of Echinococcus granulosus in dogs, specific antibodies in children and prevalence of echinococcosis in one-year-old lambs were observed for 3 years. Coproantigen of E. granulosus was positive in 41.2% of the dogs at the start of experiment. In the second and third year after medicated-bar implantation, coproantigen was undetectable in any dogs examined, while 3.0% of dogs were positive at the end of the fourth year. The antibody positive rate in 7-year-old pupils, that was 41.2% before the experiment, declined gradually and it was 5.4% in the fourth year, while children in the non-intervention control area showed 30.6% seropositivity. The prevalence of hydatid disease in children aged 7-16 years also declined significantly. The prevalence of hydatidosis in lambs one year of age was 44.8% in the first year, dropping to 10.7% in the fourth year, while in the non-intervention control area the level of infection was 46.4%. These results demonstrated not only that the slow released praziquantel-medicated bars efficiently blocked reinfection in dogs at least for 2 years, but also the measure was effective in preventing transmission of cystic echinococcosis to both man and livestock.

Economic Statistical Design of Integrated X-bar-S Control Chart with Preventive Maintenance and General Failure Distribution

PubMed Central

Caballero Morales, Santiago Omar

2013-01-01

The application of Preventive Maintenance (PM) and Statistical Process Control (SPC) are important practices to achieve high product quality, small frequency of failures, and cost reduction in a production process. However there are some points that have not been explored in depth about its joint application. First, most SPC is performed with the X-bar control chart which does not fully consider the variability of the production process. Second, many studies of design of control charts consider just the economic aspect while statistical restrictions must be considered to achieve charts with low probabilities of false detection of failures. Third, the effect of PM on processes with different failure probability distributions has not been studied. Hence, this paper covers these points, presenting the Economic Statistical Design (ESD) of joint X-bar-S control charts with a cost model that integrates PM with general failure distribution. Experiments showed statistically significant reductions in costs when PM is performed on processes with high failure rates and reductions in the sampling frequency of units for testing under SPC. PMID:23527082

Three Axis Control of the Hubble Space Telescope Using Two Reaction Wheels and Magnetic Torquer Bars for Science Observations

NASA Technical Reports Server (NTRS)

Hur-Diaz, Sun; Wirzburger, John; Smith, Dan

2008-01-01

The Hubble Space Telescope (HST) is renowned for its superb pointing accuracy of less than 10 milli-arcseconds absolute pointing error. To accomplish this, the HST relies on its complement of four reaction wheel assemblies (RWAs) for attitude control and four magnetic torquer bars (MTBs) for momentum management. As with most satellites with reaction wheel control, the fourth RWA provides for fault tolerance to maintain three-axis pointing capability should a failure occur and a wheel is lost from operations. If an additional failure is encountered, the ability to maintain three-axis pointing is jeopardized. In order to prepare for this potential situation, HST Pointing Control Subsystem (PCS) Team developed a Two Reaction Wheel Science (TRS) control mode. This mode utilizes two RWAs and four magnetic torquer bars to achieve three-axis stabilization and pointing accuracy necessary for a continued science observing program. This paper presents the design of the TRS mode and operational considerations necessary to protect the spacecraft while allowing for a substantial science program.

Spontaneous symmetry breaking in a two-lane model for bidirectional overtaking traffic

NASA Astrophysics Data System (ADS)

Appert-Rolland, C.; Hilhorst, H. J.; Schehr, G.

2010-08-01

Firstly, we consider a unidirectional flux \\bar {\\omega } of vehicles, each of which is characterized by its 'natural' velocity v drawn from a distribution P(v). The traffic flow is modeled as a collection of straight 'world lines' in the time-space plane, with overtaking events represented by a fixed queuing time τ imposed on the overtaking vehicle. This geometrical model exhibits platoon formation and allows, among many other things, for the calculation of the effective average velocity w\\equiv \\phi (v) of a vehicle of natural velocity v. Secondly, we extend the model to two opposite lanes, A and B. We argue that the queuing time τ in one lane is determined by the traffic density in the opposite lane. On the basis of reasonable additional assumptions we establish a set of equations that couple the two lanes and can be solved numerically. It appears that above a critical value \\bar {\\omega }_{\\mathrm {c}} of the control parameter \\bar {\\omega } the symmetry between the lanes is spontaneously broken: there is a slow lane where long platoons form behind the slowest vehicles, and a fast lane where overtaking is easy due to the wide spacing between the platoons in the opposite direction. A variant of the model is studied in which the spatial vehicle density \\bar {\\rho } rather than the flux \\bar {\\omega } is the control parameter. Unequal fluxes \\bar {\\omega }_{\\mathrm {A}} and \\bar {\\omega }_{\\mathrm {B}} in the two lanes are also considered. The symmetry breaking phenomenon exhibited by this model, even though no doubt hard to observe in pure form in real-life traffic, nevertheless indicates a tendency of such traffic.

Nitrosative stress uncovers potent β2-adrenergic receptor-linked vasodilation further enhanced by blockade of clathrin endosome formation.

PubMed

Frame, Mary D; Dewar, Anthony M; Calizo, Rhodora C; Qifti, Androniqi; Scarlata, Suzanne F

2018-06-01

This study investigated the effect of sodium nitroprusside (SNP) preexposure on vasodilation via the β-adrenergic receptor (BAR) system. SNP was used as a nitrosative/oxidative proinflammatory insult. Small arterioles were visualized by intravital microscopy in the hamster cheek pouch tissue (isoflurane, n = 45). Control dilation to isoproterenol (EC 50 : 10 -7 mol/l) became biphasic as a function of concentration after 2 min of exposure to SNP (10 -4 M), with increased potency at picomolar dilation uncovered and decreased efficacy at the micromolar dilation. Control dilation to curcumin was likewise altered after SNP, but only the increased potency at a low dose was uncovered, whereas micromolar dilation was eliminated. The picomolar dilations were blocked by the potent BAR-2 inverse agonist carazolol (10 -9 mol/l). Dynamin inhibition with dynasore mimicked this effect, suggesting that SNP preexposure prevented BAR agonist internalization. Using HeLa cells transfected with BAR-2 tagged with monomeric red fluorescent protein, exposure to 10 -8 -10 -6 mol/l curcumin resulted in internalization and colocalization of BAR-2 and curcumin (FRET) that was prevented by oxidative stress (10 -3 mol/l CoCl 2 ), supporting that stress prevented internalization of the BAR agonist with the micromolar agonist. This study presents novel data supporting that distinct pools of BARs are differentially available after inflammatory insult. NEW & NOTEWORTHY Preexposure to an oxidative/nitrosative proinflammatory insult provides a "protective preconditioning" against future oxidative damage. We examined immediate vasoactive and molecular consequences of a brief preexposure via β-adrenergic receptor signaling in small arterioles. Blocked receptor internalization with elevated reactive oxygen levels coincides with a significant and unexpected vasodilation to β-adrenergic agonists at picomolar doses.

The transient divided bar method for laboratory measurements of thermal properties

NASA Astrophysics Data System (ADS)

Bording, Thue S.; Nielsen, Søren B.; Balling, Niels

2016-12-01

Accurate information on thermal conductivity and thermal diffusivity of materials is of central importance in relation to geoscience and engineering problems involving the transfer of heat. Several methods, including the classical divided bar technique, are available for laboratory measurements of thermal conductivity, but much fewer for thermal diffusivity. We have generalized the divided bar technique to the transient case in which thermal conductivity, volumetric heat capacity and thereby also thermal diffusivity are measured simultaneously. As the density of samples is easily determined independently, specific heat capacity can also be determined. The finite element formulation provides a flexible forward solution for heat transfer across the bar, and thermal properties are estimated by inverse Monte Carlo modelling. This methodology enables a proper quantification of experimental uncertainties on measured thermal properties and information on their origin. The developed methodology was applied to various materials, including a standard ceramic material and different rock samples, and measuring results were compared with results applying traditional steady-state divided bar and an independent line-source method. All measurements show highly consistent results and with excellent reproducibility and high accuracy. For conductivity the obtained uncertainty is typically 1-3 per cent, and for diffusivity uncertainty may be reduced to about 3-5 per cent. The main uncertainty originates from the presence of thermal contact resistance associated with the internal interfaces in the bar. These are not resolved during inversion and it is imperative that they are minimized. The proposed procedure is simple and may quite easily be implemented to the many steady-state divided bar systems in operation. A thermally controlled bath, as applied here, may not be needed. Simpler systems, such as applying temperature-controlled water directly from a tap, may also be applied.

Osmotically-induced tension and the binding of N-BAR protein to lipid vesicles.

PubMed

Hutchison, Jaime B; Karunanayake Mudiyanselage, Aruni P K K; Weis, Robert M; Dinsmore, Anthony D

2016-02-28

The binding affinity of a curvature-sensing protein domain (N-BAR) is measured as a function of applied osmotic stress while the membrane curvature is nearly constant. Varying the osmotic stress allows us to control membrane tension, which provides a probe of the mechanism of binding. We study the N-BAR domain of the Drosophila amphiphysin and monitor its binding on 50 nm-radius vesicles composed of 90 mol% DOPC and 10 mol% PIP. We find that the bound fraction of N-BAR is enhanced by a factor of approximately 6.5 when the tension increases from zero to 2.6 mN m(-1). This tension-induced response can be explained by the hydrophobic insertion mechanism. From the data we extract a hydrophobic domain area that is consistent with known structure. These results indicate that membrane stress and strain could play a major role in the previously reported curvature-affinity of N-BAR.

Tidally Induced Bars of Galaxies in Clusters

NASA Astrophysics Data System (ADS)

Łokas, Ewa L.; Ebrová, Ivana; del Pino, Andrés; Sybilska, Agnieszka; Athanassoula, E.; Semczuk, Marcin; Gajda, Grzegorz; Fouquet, Sylvain

2016-08-01

Using N-body simulations, we study the formation and evolution of tidally induced bars in disky galaxies in clusters. Our progenitor is a massive, late-type galaxy similar to the Milky Way, composed of an exponential disk and a Navarro-Frenk-White dark matter halo. We place the galaxy on four different orbits in a Virgo-like cluster and evolve it for 10 Gyr. As a reference case, we also evolve the same model in isolation. Tidally induced bars form on all orbits soon after the first pericenter passage and survive until the end of the evolution. They appear earlier, are stronger and longer, and have lower pattern speeds for tighter orbits. Only for the tightest orbit are the properties of the bar controlled by the orientation of the tidal torque from the cluster at pericenter. The mechanism behind the formation of the bars is the angular momentum transfer from the galaxy stellar component to its halo. All of the bars undergo extended periods of buckling instability that occur earlier and lead to more pronounced boxy/peanut shapes when the tidal forces are stronger. Using all simulation outputs of galaxies at different evolutionary stages, we construct a toy model of the galaxy population in the cluster and measure the average bar strength and bar fraction as a function of clustercentric radius. Both are found to be mildly decreasing functions of radius. We conclude that tidal forces can trigger bar formation in cluster cores, but not in the outskirts, and thus can cause larger concentrations of barred galaxies toward the cluster center.

Magnetic domain configuration of (111)-oriented LaFeO 3 epitaxial thin films

DOE PAGES

Hallsteinsen, I.; Moreau, M.; Chopdekar, R. V.; ...

2017-08-22

In antiferromagnetic spintronics control of the domains and corresponding spin axis orientation is crucial for devices. Here we investigate the antiferromagnetic axis in (111)-oriented LaFeO 3 SrTiO 3 , which is coupled to structural twin domains. The structural domains have either the orthorhombic a- or b-axis along the in-plane <1more » $$\\bar{1}$$0> cubic directions of the substrate, and the corresponding magnetic domains have the antiferromagnetic axis in the sample plane. Six degenerate antiferromagnetic axes are found corresponding to the <1$$\\bar{1}$$0> and <11$$\\bar{2}$$> in-plane directions. This is in contrast to the biaxial anisotropy in (001)-oriented films and reflects how crystal orientation can be used to control magnetic anisotropy in antiferromagnets.« less

Development of high-temperature Kolsky compression bar techniques for recrystallization investigation

NASA Astrophysics Data System (ADS)

Song, B.; Antoun, B. R.; Boston, M.

2012-05-01

We modified the design originally developed by Kuokkala's group to develop an automated high-temperature Kolsky compression bar for characterizing high-rate properties of 304L stainless steel at elevated temperatures. Additional features have been implemented to this high-temperature Kolsky compression bar for recrystallization investigation. The new features ensure a single loading on the specimen and precise time and temperature control for quenching to the specimen after dynamic loading. Dynamic compressive stress-strain curves of 304L stainless steel were obtained at 21, 204, 427, 649, and 871 °C (or 70, 400, 800, 1200, and 1600 °F) at the same constant strain rate of 332 s-1. The specimen subjected to specific time and temperature control for quenching after a single dynamic loading was preserved for investigating microstructure recrystallization.

Development of self-sensing BFRP bars with distributed optic fiber sensors

NASA Astrophysics Data System (ADS)

Tang, Yongsheng; Wu, Zhishen; Yang, Caiqian; Shen, Sheng; Wu, Gang; Hong, Wan

2009-03-01

In this paper, a new type of self-sensing basalt fiber reinforced polymer (BFRP) bars is developed with using the Brillouin scattering-based distributed optic fiber sensing technique. During the fabrication, optic fiber without buffer and sheath as a core is firstly reinforced through braiding around mechanically dry continuous basalt fiber sheath in order to survive the pulling-shoving process of manufacturing the BFRP bars. The optic fiber with dry basalt fiber sheath as a core embedded further in the BFRP bars will be impregnated well with epoxy resin during the pulling-shoving process. The bond between the optic fiber and the basalt fiber sheath as well as between the basalt fiber sheath and the FRP bar can be controlled and ensured. Therefore, the measuring error due to the slippage between the optic fiber core and the coating can be improved. Moreover, epoxy resin of the segments, where the connection of optic fibers will be performed, is uncured by isolating heat from these parts of the bar during the manufacture. Consequently, the optic fiber in these segments of the bar can be easily taken out, and the connection between optic fibers can be smoothly carried out. Finally, a series of experiments are performed to study the sensing and mechanical properties of the propose BFRP bars. The experimental results show that the self-sensing BFRP bar is characterized by not only excellent accuracy, repeatability and linearity for strain measuring but also good mechanical property.

Initial experiments in thrusterless locomotion control of a free-flying robot

NASA Technical Reports Server (NTRS)

Jasper, W. J.; Cannon, R. H., Jr.

1990-01-01

A two-arm free-flying robot has been constructed to study thrusterless locomotion in space. This is accomplished by pushing off or landing on a large structure in a coordinated two-arm maneuver. A new control method, called system momentum control, allows the robot to follow desired momentum trajectories and thus leap or crawl from one structure to another. The robot floats on an air-cushion, simulating in two dimensions the drag-free zero-g environment of space. The control paradigm has been verified experimentally by commanding the robot to push off a bar with both arms, rotate 180 degrees, and catch itself on another bar.

A novel four-bar linkage prosthetic knee based on magnetorheological effect: principle, structure, simulation and control

NASA Astrophysics Data System (ADS)

Xu, Lei; Wang, Dai-Hua; Fu, Qiang; Yuan, Gang; Hu, Lei-Zi

2016-11-01

In this paper, the principle and structure of the four-bar linkage prosthetic knee based on the magnetorheological effect (FLPKME) are proposed and realized by individually integrating the upper and lower link rods of the four-bar linkage with the piston rod and the outer cylinder of the magnetorheological (MR) damper. The integrated MR damper, in which the MR fluid is operated in the shear mode, has a double-ended structure. The prototype of the FLPKME is designed and fabricated. Utilizing the developed FLPKME, the lower limb prosthesis is developed, modeled, and simulated. On these bases, the control algorithm for the FLPKME is developed. A test platform for the FLPKME is developed and the performance of the FLPKME with seven constant currents and controlled currents by the control algorithm developed in this paper are experimentally tested. The results show that the FLPKME with a constant current of 1.6 A possesses the basic stable gait, and the FLPKME with the controlled currents by the control algorithm developed in this paper is able to track the motions well and to imitate the natural motions of a healthy human knee joint.

Age differences between the controlled force exertion measured by a computer-generated sinusoidal and a bar chart display.

PubMed

Nagasawa, Yoshinori; Demura, Shinichi; Takahashi, Kenji

2013-01-01

It is important to develop an accurate method of measuring controlled force exertion. This study examined the age differences between the controlled force exertion measured by a sinusoidal waveform and a bar chart display. The participants comprised 175 right-handed male adults aged 20-86 years. The participants were divided into three age groups: young (n=53), middle-aged (n=71), and elderly (n=51). They matched the submaximal grip strength exerted by their dominant hand to changing demand values displayed as either a sinusoidal waveform or a bar chart appearing on a personal computer screen. The participants performed the controlled force exertion test three times with a 1-min inter-trial interval using their dominant hand. The dependent variable was the total sum of the percentage values of the differences between the demand value and grip exertion value for more than 25s. The coefficient of variance had almost the same range in all age groups in both displays (CVSW=28.0-36.9, CVBC=29.1-32.6), but the elderly group showed a somewhat higher value with the sinusoidal waveform. Significant correlations were found between the scores with sinusoidal waveform and bar chart displays in the young, middle-aged, and elderly groups (r=0.47-0.68), but the correlations did not differ significantly between the age groups. Scores over 1500% in sinusoidal and bar chart display were found in one and two participants, respectively, in the middle-aged group and in 12% and 16% of the participants, respectively, in the elderly group. Furthermore, among all participants, only 8% of participants in the elderly group scored over 1500% in both displays. Scores over 1500% in both displays are considered to be considerably worse in controlled force exertion than lower scores. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Near-Bed Turbulent Kinetic Energy Budget Under a Large-Scale Plunging Breaking Wave Over a Fixed Bar

NASA Astrophysics Data System (ADS)

van der Zanden, Joep; van der A, Dominic A.; Cáceres, Iván.; Hurther, David; McLelland, Stuart J.; Ribberink, Jan S.; O'Donoghue, Tom

2018-02-01

Hydrodynamics under regular plunging breaking waves over a fixed breaker bar were studied in a large-scale wave flume. A previous paper reported on the outer flow hydrodynamics; the present paper focuses on the turbulence dynamics near the bed (up to 0.10 m from the bed). Velocities were measured with high spatial and temporal resolution using a two component laser Doppler anemometer. The results show that even at close distance from the bed (1 mm), the turbulent kinetic energy (TKE) increases by a factor five between the shoaling, and breaking regions because of invasion of wave breaking turbulence. The sign and phase behavior of the time-dependent Reynolds shear stresses at elevations up to approximately 0.02 m from the bed (roughly twice the elevation of the boundary layer overshoot) are mainly controlled by local bed-shear-generated turbulence, but at higher elevations Reynolds stresses are controlled by wave breaking turbulence. The measurements are subsequently analyzed to investigate the TKE budget at wave-averaged and intrawave time scales. Horizontal and vertical turbulence advection, production, and dissipation are the major terms. A two-dimensional wave-averaged circulation drives advection of wave breaking turbulence through the near-bed layer, resulting in a net downward influx in the bar trough region, followed by seaward advection along the bar's shoreward slope, and an upward outflux above the bar crest. The strongly nonuniform flow across the bar combined with the presence of anisotropic turbulence enhances turbulent production rates near the bed.

Discrete wavelet transform and energy eigen value for rotor bars fault detection in variable speed field-oriented control of induction motor drive.

PubMed

Ameid, Tarek; Menacer, Arezki; Talhaoui, Hicham; Azzoug, Youness

2018-05-03

This paper presents a methodology for the broken rotor bars fault detection is considered when the rotor speed varies continuously and the induction machine is controlled by Field-Oriented Control (FOC). The rotor fault detection is obtained by analyzing a several mechanical and electrical quantities (i.e., rotor speed, stator phase current and output signal of the speed regulator) by the Discrete Wavelet Transform (DWT) in variable speed drives. The severity of the fault is obtained by stored energy calculation for active power signal. Hence, it can be a useful solution as fault indicator. The FOC is implemented in order to preserve a good performance speed control; to compensate the broken rotor bars effect in the mechanical speed and to ensure the operation continuity and to investigate the fault effect in the variable speed. The effectiveness of the technique is evaluated in simulation and in a real-time implementation by using Matlab/Simulink with the real-time interface (RTI) based on dSpace 1104 board. Copyright © 2018. Published by Elsevier Ltd.

WRAP low level waste restricted waste management (LLW RWM) glovebox acceptance test report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leist, K.J.

1997-11-24

On April 22, 1997, the Low Level Waste Restricted Waste Management (LLW RWM) glovebox was tested using acceptance test procedure 13027A-87. Mr. Robert L. Warmenhoven served as test director, Mr. Kendrick Leist acted as test operator and test witness, and Michael Lane provided miscellaneous software support. The primary focus of the glovebox acceptance test was to examine glovebox control system interlocks, operator Interface Unit (OIU) menus, alarms, and messages. Basic drum port and lift table control sequences were demonstrated. OIU menus, messages, and alarm sequences were examined, with few exceptions noted. Barcode testing was bypassed, due to the lack ofmore » installed equipment as well as the switch from basic reliance on fixed bar code readers to the enhanced use of portable bar code readers. Bar code testing was completed during performance of the LLW RWM OTP. Mechanical and control deficiencies were documented as Test Exceptions during performance of this Acceptance Test. These items are attached as Appendix A to this report.« less

South of the border: a legal haven for underage drinking.

PubMed

Lange, James E; Voas, Robert B; Johnson, Mark B

2002-09-01

The research describes the characteristics and motivations of youthful San Diego County residents who patronize the bars and nightclubs in Tijuana, Mexico. Two random-digit-dial surveys of San Diego County residents-one group aged 18-20 years and one aged 21-30 years-was conducted during a 2-year period. Those who reported having visited the bars in Tijuana in the last year were compared with those who had not. All respondents were residents of San Diego County, California, USA. The study comprised 2200 youths between 18 and 30 years of age. The interview protocol included questions covering demographic characteristics, drinking and drug-use history, experience with Tijuana bars, and ratings of bar features in San Diego and Tijuana. About half of the 18-20-year-olds and a third of the 21-30-year-olds reported visiting bars in Tijuana at least once in the past 12 months. Race, age, gender, heavy drinking and drug-use history were significantly associated with visits to Tijuana bars. The price of alcohol and the perceived freedom to get drunk in Tijuana bars were considered attractive features leading to cross-border drinking. The features of the alcohol service in Mexican bars that attract youthful drinkers (low cost and liberal availability of alcohol, lack of formal controls, and presence of heavy drinkers) are similar to those present in other drinking locales that lead to drunkenness. Thus, a better understanding of the characteristics and motivations of the US youths patronizing bars in Tijuana can lead to improved interventions to reduce heavy, risky drinking.

Multi-wavelength observations of barred, flocculent galaxies

NASA Astrophysics Data System (ADS)

Ratay, Douglas Lee

Although it is generally accepted that large galaxies form through the assemblage of smaller objects, an explanation for the morphology of galaxies is not available. Any complete theory of galaxy morphology must include production and dissolution mechanisms for galactic bars, rings, nuclear bars, spiral arms, and companions. This theory does not exist because of the lack of detailed data from many types of galaxies in different environments. We have defined a new sample of galaxies which are simultaneously flocculent, barred, and isolated. We have performed optical, near-infrared, and radio (HI) observations of the galaxies in this sample. We measured properties of our galaxies including bar length, bar axis ratio, HI diameter, HI mass, and dynamical mass. We found that our sample group is heterogeneous, and compares well to a standard samples of galaxies. We found two of our galaxies to possess companions, and two others to show evidence of current interactions. This is consistent with other observations indicating that local isolated galaxies do not possess a large number of small companions. We cannot rule out the possibility of very small companions. We find that as a group our sample is slightly less luminous than normal galaxies and may be more likely to be involved in interactions. We conclude that the bar and spiral arm features in our sample are due to processes internal to the galaxies, likely involving the interaction between the galactic disk and halo. We defined a control sample of barred, grand design galaxies to further determine the acceptability of barred, flocculent galaxies as a physically meaningful subset of galaxies.

Select Agent Recovery and Identification Using Aptamer-Linked Immoblized Sorbent Assay

DTIC Science & Technology

2008-01-01

GTG T 5’ BHQ2 (Black Hole Quencher 2). The numbers of moles of the two strands were compared. The strand with the largest number of nanomoles was...the Shiga toxin (black bars) or ovalbumin control ( gray bars) was immobilized in each well of the microtiter plate and quantum dot suspension was

Effects of cereal bar containing polydextrose on subjective feelings of appetite and energy intake in overweight adults over 15 d.

PubMed

Martinelli, Marcela; Hick, Emilia; Walz, Florencia; Drago, Silvina R

2018-01-18

The effects of 15 d polydextrose (16.7 g) consumption on energy intake (EI) and appetite feelings were investigated. Overweight adults consumed a polydextrose-bar or a control-bar matched in energy content as a midmorning snack for 15 consecutive days in a single-blind, randomised, crossover design. The two 15-d intervention periods were separated by a 15-d washout period. On the day 1 and the day 15 of each intervention period, energy intake (primary outcome) and appetite feelings (secondary outcome) were assessed. There were not significant main effects of the day, type of bar, or their interaction for EI (at lunchtime test meal, at rest of the day, or at total daily) or subjective feelings (hunger, desire to eat, fullness, and prospective food consumption) during the satiation and satiety periods. The results showed the consumption of polydextrose-bar during 15 d did not significantly affect energy intake and subjective feelings of appetite in overweight adults.

Quantum teleportation of an arbitrary two-qubit state and its relation to multipartite entanglement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rigolin, Gustavo

2005-03-01

We explicitly show a protocol in which an arbitrary two qubit state vertical bar {phi}>=a vertical bar 00>+b vertical bar 01>+c vertical bar 10>+d vertical bar 11> is faithfully and deterministically teleported from Alice to Bob. We construct the 16 orthogonal generalized Bell states that can be used to teleport the two qubits. The local operations Bob must perform on his qubits in order to recover the teleported state are also constructed. They are restricted only to single-qubit gates. This means that a controlled-NOT gate is not necessary to complete the protocol. A generalization where N qubits are teleported ismore » also shown. We define a generalized magic basis, which possesses interesting properties. These properties help us to suggest a generalized concurrence from which we construct a measure of entanglement that has a clear physical interpretation: A multipartite state has maximum entanglement if it is a genuine quantum teleportation channel.« less

Deficiency of ''Thin'' Stellar Bars in Seyfert Host Galaxies

NASA Technical Reports Server (NTRS)

Shlosman, Isaac; Peletier, Reynier F.; Knapen, Johan

1999-01-01

Using all available major samples of Seyfert galaxies and their corresponding control samples of closely matched non-active galaxies, we find that the bar ellipticities (or axial ratios) in Seyfert galaxies are systematically different from those in non-active galaxies. Overall, there is a deficiency of bars with large ellipticities (i.e., 'fat' or 'weak' bars) in Seyferts, compared to non-active galaxies. Accompanied with a large dispersion due to small number statistics, this effect is strictly speaking at the 2 sigma level. To obtain this result, the active galaxy samples of near-infrared surface photometry were matched to those of normal galaxies in type, host galaxy ellipticity, absolute magnitude, and, to some extent, in redshift. We discuss possible theoretical explanations of this phenomenon within the framework of galactic evolution, and, in particular, of radial gas redistribution in barred galaxies. Our conclusions provide further evidence that Seyfert hosts differ systematically from their non-active counterparts on scales of a few kpc.

Detection of Bar Transgenic Sugarcane with a Rapid and Visual Loop-Mediated Isothermal Amplification Assay.

PubMed

Zhou, Dinggang; Wang, Chunfeng; Li, Zhu; Chen, Yun; Gao, Shiwu; Guo, Jinlong; Lu, Wenying; Su, Yachun; Xu, Liping; Que, Youxiong

2016-01-01

Genetic engineering offers an attractive alternative in sugarcane breeding for increasing cane and sugar yields as well as disease and insect resistance. Bar transgenic sugarcane employing the herbicide tolerance is a useful agronomical trait in weed control. In this study, a loop-mediated isothermal amplification (LAMP) assay for rapid detection of the bar gene in transgenic sugarcane has been developed and evaluated. A set of six primers was designed for LAMP-based amplification of the bar gene. The LAMP reaction conditions were optimized as follows: 5.25 mM of Mg(2+), 6:1 ratio of inner vs. outer primer, and 6.0 U of Bst DNA polymerase in a reaction volume of 25.0 μL. The detection limit of the recombinant plasmid 1Ac0229 was as low as 10 copies in the developed LAMP, which was 10-fold higher sensitive than that of conventional PCR. In 100 putative transgenic lines, the bar gene was detected in 100/100 cases (100%) by LAMP and 97/100 cases (97%) by conventional PCR, respectively. In conclusion, the developed LAMP assay is visual, rapid, sensitive, reliable, and cost-effective for detection of the bar specific transgenic sugarcane.

Alcohol Mixed With Energy Drinks and Sexually Related Causes of Conflict in the Barroom.

PubMed

Ball, Natalie J; Miller, Kathleen E; Quigley, Brian M; Eliseo-Arras, Rebecca K

2018-05-01

The popularity of alcohol mixed with energy drinks (AmED) among young adults has spurred studies that focus on its links to aggression and risk-taking behaviors, including risky sex and sexual victimization. However, no studies to date have looked at the relationship between AmED and causes of interpersonal conflict in bars at the event level. The present study evaluated whether AmED use at the time of the bar conflict was associated with greater odds that a bar conflict would be precipitated by sexually related causes. Online survey data, including a description of a recent bar conflict, were collected from a community sample of 175 young adult (97 female) AmED users age 18 to 30 in western New York state. Qualitative findings included the natural categorization of sexually related causes of conflict, consisting of unwanted sexual advances and jealousy, and the prominence of sexual competition in these conflicts. Proportion of AmED use (out of the total quantity of alcoholic drinks) predicted the odds that the bar conflict would have a sexually related cause, above and beyond control variables. How AmED use might be associated with sexual competition and conflict in the bar is discussed.

Detection of Bar Transgenic Sugarcane with a Rapid and Visual Loop-Mediated Isothermal Amplification Assay

PubMed Central

Zhou, Dinggang; Wang, Chunfeng; Li, Zhu; Chen, Yun; Gao, Shiwu; Guo, Jinlong; Lu, Wenying; Su, Yachun; Xu, Liping; Que, Youxiong

2016-01-01

Genetic engineering offers an attractive alternative in sugarcane breeding for increasing cane and sugar yields as well as disease and insect resistance. Bar transgenic sugarcane employing the herbicide tolerance is a useful agronomical trait in weed control. In this study, a loop-mediated isothermal amplification (LAMP) assay for rapid detection of the bar gene in transgenic sugarcane has been developed and evaluated. A set of six primers was designed for LAMP-based amplification of the bar gene. The LAMP reaction conditions were optimized as follows: 5.25 mM of Mg2+, 6:1 ratio of inner vs. outer primer, and 6.0 U of Bst DNA polymerase in a reaction volume of 25.0 μL. The detection limit of the recombinant plasmid 1Ac0229 was as low as 10 copies in the developed LAMP, which was 10-fold higher sensitive than that of conventional PCR. In 100 putative transgenic lines, the bar gene was detected in 100/100 cases (100%) by LAMP and 97/100 cases (97%) by conventional PCR, respectively. In conclusion, the developed LAMP assay is visual, rapid, sensitive, reliable, and cost-effective for detection of the bar specific transgenic sugarcane. PMID:27014303

Effects of a Hybrid Online and In-Person Training Program Designed to Reduce Alcohol Sales to Obviously Intoxicated Patrons.

PubMed

Toomey, Traci L; Lenk, Kathleen M; Erickson, Darin J; Horvath, Keith J; Ecklund, Alexandra M; Nederhoff, Dawn M; Hunt, Shanda L; Nelson, Toben F

2017-03-01

Overservice of alcohol (i.e., selling alcohol to intoxicated patrons) continues to be a problem at bars and restaurants, contributing to serious consequences such as traffic crashes and violence. We developed a training program for managers of bars and restaurants, eARM™, focusing on preventing overservice of alcohol. The program included online and face-to-face components to help create and implement establishment-specific policies. We conducted a large, randomized controlled trial in bars and restaurants in one metropolitan area in the midwestern United States to evaluate effects of the eARM program on the likelihood of selling alcohol to obviously intoxicated patrons. Our outcome measure was pseudo-intoxicated purchase attempts-buyers acted out signs of intoxication while attempting to purchase alcohol-conducted at baseline and then at 1 month, 3 months, and 6 months after training. We conducted intention-to-treat analyses on changes in purchase attempts in intervention (n = 171) versus control (n = 163) bars/restaurants using a Time × Condition interaction, as well as planned contrasts between baseline and follow-up purchase attempts. The overall Time × Condition interaction was not statistically significant. At 1 month after training, we observed a 6% relative reduction in likelihood of selling to obviously intoxicated patrons in intervention versus control bars/restaurants. At 3 months after training, this difference widened to a 12% relative reduction; however, at 6 months this difference dissipated. None of these specific contrasts were statistically significant (p = .05). The observed effects of this enhanced training program are consistent with prior research showing modest initial effects followed by a decay within 6 months of the core training. Unless better training methods are identified, training programs are inadequate as the sole approach to reduce overservice of alcohol.

The influence of newspaper coverage and a media campaign on smokers’ support for smoke-free bars and restaurants and on second-hand smoke harm awareness. Findings from the International Tobacco Control (ITC) Netherlands Survey

PubMed Central

Nagelhout, Gera E.; van den Putte, Bas; de Vries, Hein; Crone, Matty; Fong, Geoffrey T.; Willemsen, Marc C.

2015-01-01

Objective To assess the influence of newspaper coverage and a media campaign about Dutch smoke-free legislation on smokers’ support for smoke-free bars and restaurants and on second-hand smoke (SHS) harm awareness. Design and main outcome measures A content analysis was conducted of 1,041 newspaper articles on the smoke-free legislation published in six Dutch newspapers from March 2008 until April 2009. Smokers who were regular readers of at least one of these newspapers (n = 677) were selected from the pre- and post-ban waves of the International Tobacco Control (ITC) Netherlands Survey. Exposure to newspaper coverage and to the implementation campaign were correlated with changes in smokers’ support for smoke-free bars and restaurants and SHS harm awareness. Results Most newspaper coverage was found to be negative towards the smoking ban (57%) and focused on economic aspects (59%) rather than health aspects (22%). Exposure to this coverage had a small but significantly negative effect on support for smoke-free bars and restaurants (Beta = −0.09, p = 0.013). Among higher educated smokers, exposure to positive newspaper coverage had a more positive effect on support for smoke-free bars and restaurants. In addition, exposure to the implementation campaign had a small but significantly positive effect on SHS harm awareness (Beta = 0.11, p = 0.001). Conclusions Media attention about smoke-free legislation can influence smokers’ support for the legislation and SHS harm awareness. Tobacco control advocates should aim to establish positive media attention that puts forward the health arguments for the legislation. PMID:21586760

Controls for Reusable Launch Vehicles During Terminal Area Energy Management

NASA Technical Reports Server (NTRS)

Driessen, Brian J.

2005-01-01

During the terminal energy management phase of flight (last of three phases) for a reusable launch vehicle, it is common for the controller to receive guidance commands specifying desired values for (i) the roll angle roll q(sub roll), (ii) the acceleration a(sub n) in the body negative z direction, -k(sub A)-bar, and (iii) omega(sub 3), the projection of onto the body-fixed axis k(sub A)-bar, is always indicated by guidance to be zero. The objective of the controller is to regulate the actual values of these three quantities, i.e make them close to the commanded values, while maintaining system stability.

Effects of easy-to-use protein-rich energy bar on energy balance, physical activity and performance during 8 days of sustained physical exertion.

PubMed

Tanskanen, Minna M; Westerterp, Klaas R; Uusitalo, Arja L; Atalay, Mustafa; Häkkinen, Keijo; Kinnunen, Hannu O; Kyröläinen, Heikki

2012-01-01

Previous military studies have shown an energy deficit during a strenuous field training course (TC). This study aimed to determine the effects of energy bar supplementation on energy balance, physical activity (PA), physical performance and well-being and to evaluate ad libitum fluid intake during wintertime 8-day strenuous TC. Twenty-six men (age 20±1 yr.) were randomly divided into two groups: The control group (n = 12) had traditional field rations and the experimental (Ebar) group (n = 14) field rations plus energy bars of 4.1 MJ•day(-1). Energy (EI) and water intake was recorded. Fat-free mass and water loss were measured with deuterium dilution and elimination, respectively. The energy expenditure was calculated using the intake/balance method and energy availability as (EI/estimated basal metabolic rate). PA was monitored using an accelerometer. Physical performance was measured and questionnaires of upper respiratory tract infections (URTI), hunger and mood state were recorded before, during and after TC. Ebar had a higher EI and energy availability than the controls. However, decreases in body mass and fat mass were similar in both groups representing an energy deficit. No differences were observed between the groups in PA, water balance, URTI symptoms and changes in physical performance and fat-free mass. Ebar felt less hunger after TC than the controls and they had improved positive mood state during the latter part of TC while controls did not. Water deficit associated to higher PA. Furthermore, URTI symptoms and negative mood state associated negatively with energy availability and PA. An easy-to-use protein-rich energy bars did not prevent energy deficit nor influence PA during an 8-day TC. The high content of protein in the bars might have induced satiation decreasing energy intake from field rations. PA and energy intake seems to be primarily affected by other factors than energy supplementation such as mood state.

[Governance and health: the rise of the managerialism in public sector reform].

PubMed

Denis, Jean L; Lamothe, Lise; Langley, Ann; Stéphane, Guérard

2010-01-01

The article examines various healthcare systems reform projects in Canada and some Canadian provinces and reveals some tendencies in governance renewal. The analisis is based on the hypothesis that reform is an exercise aiming at the renewal of governance conception and practices. In renewing governance, reform leaders hope to use adequate and effective levers to attain announced reform objectives. The article shows that the conceptions and operational modalities of governance have changed over time and that they reveal tensions inherent to the transformation and legitimation process of public healthcare systems. The first section discusses the relationships between reform and change. The second section defines the conception of gouvernance used for the analisis. Based on a content analisis of the various reform reports, the third section reveals the evolution of the conception of governance in healthcare systems in Canada. In order to expose the new tendencies, ideologies and operational principles at the heart of the reform projects are analysed. Five ideologies are identified: the democratic ideology, the "population health" ideology, the business ideology, the managerial ideology and the ideology of equity and humanism. This leads to a discussion on the dominant influence of the managerial ideology in the current reform projects.

A miniature Hopkinson experiment device based on multistage reluctance coil electromagnetic launch.

PubMed

Huang, Wenkai; Huan, Shi; Xiao, Ying

2017-09-01

A set of seven-stage reluctance miniaturized Hopkinson bar electromagnetic launcher has been developed in this paper. With the characteristics of high precision, small size, and little noise pollution, the device complies with the requirements of miniaturized Hopkinson bar for high strain rate. The launcher is a seven-stage accelerating device up to 65.5 m/s. A high performance microcontroller is used to control accurately the discharge of capacitor sets, by means of which the outlet velocity of the projectile can be controlled within a certain velocity range.

A miniature Hopkinson experiment device based on multistage reluctance coil electromagnetic launch

NASA Astrophysics Data System (ADS)

Huang, Wenkai; Huan, Shi; Xiao, Ying

2017-09-01

A set of seven-stage reluctance miniaturized Hopkinson bar electromagnetic launcher has been developed in this paper. With the characteristics of high precision, small size, and little noise pollution, the device complies with the requirements of miniaturized Hopkinson bar for high strain rate. The launcher is a seven-stage accelerating device up to 65.5 m/s. A high performance microcontroller is used to control accurately the discharge of capacitor sets, by means of which the outlet velocity of the projectile can be controlled within a certain velocity range.

Nonlinear Analysis of an Unstable Bench Press Bar Path and Muscle Activation.

PubMed

Lawrence, Michael A; Leib, Daniel J; Ostrowski, Stephanie J; Carlson, Lara A

2017-05-01

Lawrence, MA, Leib, DJ, Ostrowski, SJ, and Carlson, LA. Nonlinear analysis of an unstable bench press bar path and muscle activation. J Strength Cond Res 31(5): 1206-1211, 2017-Unstable resistance exercises are typically performed to improve the ability of stabilizing muscles to maintain joint integrity under a load. The purpose of this study was to examine the effects of an unstable load (as provided by a flexible barbell and a load suspended by elastic bands) on the bar path, the primary musculature, and stabilizing musculature while bench pressing using nonlinear analyses. Fifteen resistance-trained men (age 24.2 ± 2.7 years, mass 84.1 ± 12.0 kg, height 1.77 ± 0.05 m, 9.9 ± 3.4 years of lifting experience, and bench press 1 repetition maximum (RM) 107.5 ± 25.9 kg) volunteered for this study. Subjects pressed 2 sets of 5 repetitions in both stable (total load 75% 1RM) and unstable (total load 60% 1RM) conditions using a standard barbell and a flexible Earthquake bar, respectively. Surface electromyography was used to detect muscle activity of primary movers (pectoralis major, anterior deltoid, and triceps) and bar stabilizing musculature (latissimus dorsi, middle and posterior deltoid, biceps brachii, and upper trapezius). During the unstable condition, the bar moved in more ways and was less predictable in the mediolateral and anteroposterior directions. However, the muscle activation patterns of all muscles were more constrained with the unstable barbell. These findings suggest that the unstable condition was more challenging to control, but subjects controlled the instability by contracting their muscles in a more stable pattern or "staying tight" throughout the exercise.

Prevalence and predictors of smoking in “smoke-free” bars. Findings from the International Tobacco Control (ITC) Europe Surveys

PubMed Central

Nagelhout, Gera E.; Mons, Ute; Allwright, Shane; Guignard, Romain; Beck, Francois; Fong, Geoffrey T.; de Vries, Hein; Willemsen, Marc C.

2015-01-01

National level smoke-free legislation is implemented to protect the public from exposure to second-hand tobacco smoke (SHS). The first aim of this study was to investigate how successful the smoke-free hospitality industry legislation in Ireland (March 2004), France (January 2008), the Netherlands (July 2008), and Germany (between August 2007 and July 2008) was in reducing smoking in bars. The second aim was to assess individual smokers’ predictors of smoking in bars post-ban. The third aim was to examine country differences in predictors and the fourth aim to examine differences between educational levels (as an indicator of socioeconomic status). This study used nationally representative samples of 3,147 adult smokers from the International Tobacco Control (ITC) Europe Surveys who were surveyed pre- and post-ban. The results reveal that while the partial smoke-free legislation in the Netherlands and Germany was effective in reducing smoking in bars (from 88% to 34% and from 87% to 44% respectively), the effectiveness was much lower than the comprehensive legislation in Ireland and France which almost completely eliminated smoking in bars (from 97% to 3% and from 84% to 3% respectively). Smokers who were more supportive of the ban, were more aware of the harm of SHS, and who had negative opinions of smoking were less likely to smoke in bars post-ban. Support for the ban was a stronger predictor in Germany. SHS harm awareness was a stronger predictor among less educated smokers in the Netherlands and Germany. The results indicate the need for strong comprehensive smoke-free legislation without exceptions. This should be accompanied by educational campaigns in which the public health rationale for the legislation is clearly explained. PMID:21497973

The effect of 8.25% sodium hypochlorite on dental pulp dissolution and dentin flexural strength and modulus.

PubMed

Cullen, James K T; Wealleans, James A; Kirkpatrick, Timothy C; Yaccino, John M

2015-06-01

The purpose of this study was to evaluate the effect of various concentrations of sodium hypochlorite (NaOCl), including 8.25%, on dental pulp dissolution and dentin flexural strength and modulus. Sixty dental pulp samples and 55 plane parallel dentin bars were retrieved from extracted human teeth. Five test groups (n = 10) were formed consisting of a pulp sample and dentin bar immersed in various NaOCl solutions. The negative control group (n = 5) consisted of pulp samples and dentin bars immersed in saline. The positive control group (n = 5) consisted of pulp samples immersed in 8.25% NaOCl without a dentin bar. Every 6 minutes for 1 hour, the solutions were refreshed. The dentin bars were tested for flexural strength and modulus with a 3-point bend test. The time until total pulp dissolution and any changes in dentin bar flexural strength and modulus for the different NaOCl solutions were statistically analyzed. An increase in NaOCl concentration showed a highly significant decrease in pulp dissolution time. The pulp dissolution property of 8.25% NaOCl was significantly faster than any other tested concentration of NaOCl. The presence of dentin did not have a significant effect on the dissolution capacity of NaOCl if the solutions were refreshed. NaOCl concentration did not have a statistically significant effect on dentin flexural strength or modulus. Dilution of NaOCl decreases its pulp dissolution capacity. Refreshing the solution is essential to counteract the effects of dentin. In this study, NaOCl did not have a significant effect on dentin flexural strength or modulus. Published by Elsevier Inc.

Occupational noise exposure of nightclub bar employees in Ireland.

PubMed

Kelly, Aoife C; Boyd, Sara M; Henehan, Gary T M; Chambers, Gordon

2012-01-01

Due to the transposition of the EU Directive 2003/10/EC into Irish Law, the entertainment sector was obligated to comply with the requirements of the Safety, Health and Welfare at Work (General Application) Regulations 2007, Chapter 1 Part 5: Control of Noise at Work since February 2008. Compliance with the Noise Regulations was examined in 9 nightclubs in Ireland. The typical daily noise exposure of 19 bar employees was measured using 2 logging dosimeters and a Type 1 fixed position sound level meter. Physical site inspections identified nightclub noise control measures. Interviews and questionnaires were used to assess the managers and employees awareness of the noise legislation. The average bar employee daily noise exposure (L(EX, 8h)) was 92 dBA, almost 4 times more than the accepted legal limit. None of the venues examined were fully compliant with the requirements of the 2007 Noise Regulations, and awareness of this legislation was limited.

Membrane Localization is Critical for Activation of the PICK1 BAR Domain

PubMed Central

Madsen, Kenneth L.; Eriksen, Jacob; Milan-Lobo, Laura; Han, Daniel S.; Niv, Masha Y.; Ammendrup-Johnsen, Ina; Henriksen, Ulla; Bhatia, Vikram K.; Stamou, Dimitrios; Sitte, Harald H.; McMahon, Harvey T.; Weinstein, Harel; Gether, Ulrik

2013-01-01

The PSD-95/Discs-large/ZO-1 homology (PDZ) domain protein, protein interacting with C kinase 1 (PICK1) contains a C-terminal Bin/amphiphysin/Rvs (BAR) domain mediating recognition of curved membranes; however, the molecular mechanisms controlling the activity of this domain are poorly understood. In agreement with negative regulation of the BAR domain by the N-terminal PDZ domain, PICK1 distributed evenly in the cytoplasm, whereas truncation of the PDZ domain caused BAR domain-dependent redistribution to clusters colocalizing with markers of recycling endosomal compartments. A similar clustering was observed both upon truncation of a short putative α-helical segment in the linker between the PDZ and the BAR domains and upon coexpression of PICK1 with a transmembrane PDZ ligand, including the alpha-amino-3-hydroxy-5-methyl-4-isoxazolepropionic acid (AMPA) receptor GluR2 subunit, the GluR2 C-terminus transferred to the single transmembrane protein Tac or the dopamine transporter C-terminus transferred to Tac. In contrast, transfer of the GluR2 C-terminus to cyan fluorescent protein, a cytosolic protein, did not elicit BAR domain-dependent clustering. Instead, localizing PICK1 to the membrane by introducing an N-terminal myristoylation site produced BAR domain-dependent, but ligand-independent, PICK1 clustering. The data support that in the absence of PDZ ligand, the PICK1 BAR domain is inhibited through a PDZ domain-dependent and linker-dependent mechanism. Moreover, they suggest that unmasking of the BAR domain’s membrane-binding capacity is not a consequence of ligand binding to the PDZ domain per se but results from, and coincides with, recruitment of PICK1 to a membrane compartment. PMID:18466293

The economic impact of smoke-free laws on restaurants and bars in 9 States.

PubMed

Loomis, Brett R; Shafer, Paul R; van Hasselt, Martijn

2013-08-01

Smoke-free air laws in restaurants and bars protect patrons and workers from involuntary exposure to secondhand smoke, but owners often express concern that such laws will harm their businesses. The primary objective of this study was to estimate the association between local smoke-free air laws and economic outcomes in restaurants and bars in 8 states without statewide smoke-free air laws: Alabama, Indiana, Kentucky, Mississippi, Missouri, South Carolina, Texas, and West Virginia. A secondary objective was to examine the economic impact of a 2010 statewide smoke-free restaurant and bar law in North Carolina. Using quarterly data from 2000 through 2010, we estimated dynamic panel data models for employment and sales in restaurants and bars. The models controlled for smoke-free laws, general economic activity, cigarette sales, and seasonality. We included data from 216 smoke-free cities and counties in the analysis. During the study period, only North Carolina had a statewide law banning smoking in restaurants or bars. Separate models were estimated for each state. In West Virginia, smoke-free laws were associated with a significant increase of approximately 1% in restaurant employment. In the remaining 8 states, we found no significant association between smoke-free laws and employment or sales in restaurants and bars. Results suggest that smoke-free laws did not have an adverse economic impact on restaurants or bars in any of the states studied; they provided a small economic benefit in 1 state. On the basis of these findings, we would not expect a statewide smoke-free law in Alabama, Indiana, Kentucky, Missouri, Mississippi, South Carolina, Texas, or West Virginia to have an adverse economic impact on restaurants or bars in those states.

The Economic Impact of Smoke-Free Laws on Restaurants and Bars in 9 States

PubMed Central

Shafer, Paul R.; van Hasselt, Martijn

2013-01-01

Introduction Smoke-free air laws in restaurants and bars protect patrons and workers from involuntary exposure to secondhand smoke, but owners often express concern that such laws will harm their businesses. The primary objective of this study was to estimate the association between local smoke-free air laws and economic outcomes in restaurants and bars in 8 states without statewide smoke-free air laws: Alabama, Indiana, Kentucky, Mississippi, Missouri, South Carolina, Texas, and West Virginia. A secondary objective was to examine the economic impact of a 2010 statewide smoke-free restaurant and bar law in North Carolina. Methods Using quarterly data from 2000 through 2010, we estimated dynamic panel data models for employment and sales in restaurants and bars. The models controlled for smoke-free laws, general economic activity, cigarette sales, and seasonality. We included data from 216 smoke-free cities and counties in the analysis. During the study period, only North Carolina had a statewide law banning smoking in restaurants or bars. Separate models were estimated for each state. Results In West Virginia, smoke-free laws were associated with a significant increase of approximately 1% in restaurant employment. In the remaining 8 states, we found no significant association between smoke-free laws and employment or sales in restaurants and bars. Conclusion Results suggest that smoke-free laws did not have an adverse economic impact on restaurants or bars in any of the states studied; they provided a small economic benefit in 1 state. On the basis of these findings, we would not expect a statewide smoke-free law in Alabama, Indiana, Kentucky, Missouri, Mississippi, South Carolina, Texas, or West Virginia to have an adverse economic impact on restaurants or bars in those states. PMID:23906328

Effect of additional of Hoodia Gordonii and seaweed powder on the sensory and physicochemical properties of brown rice bar

NASA Astrophysics Data System (ADS)

Hajal, Masturah Ebni; Ghani, Maaruf Abd; Daud, Norlida Mat

2015-09-01

Awareness of the nutritional content of food has increased with the emergence of various health products in the market. Cereal bar is one of the beneficial foods among consumer that concern on their healthy food. This study was conducted to develop a brown rice bar that contain active ingredients (H. gordonii and seaweed powder) and to determine the effect on sensory evaluation and physicochemical properties (colour, texture and proximate analysis) of this product. This study consisted of two phases in which the first phase consisted of development of ten formulations including control. All of the formulations were undergo analysis of colour, texture and sensory evaluation. Based on the sensory evaluation, Control (H. gordonii: 0%, seaweed: 0%) and two best formulations that consist of formulation 6 (H. gordonii: 1.6%; seaweed: 2.8%) and formulation 9 (H. gordonii: 2.4%, seaweed: 2.8%) were chosen to undergo the second phase which is proximate analysis. Base on the result, were significant different (p<0.05) on proximate analysis except for the protein and moisture content. Therefore, it can be concluded that H. gordonii is a good source of fiber when adding in a bar.

Metacontrast masking and attention do not interact.

PubMed

Agaoglu, Sevda; Breitmeyer, Bruno; Ogmen, Haluk

2016-07-01

Visual masking and attention have been known to control the transfer of information from sensory memory to visual short-term memory. A natural question is whether these processes operate independently or interact. Recent evidence suggests that studies that reported interactions between masking and attention suffered from ceiling and/or floor effects. The objective of the present study was to investigate whether metacontrast masking and attention interact by using an experimental design in which saturation effects are avoided. We asked observers to report the orientation of a target bar randomly selected from a display containing either two or six bars. The mask was a ring that surrounded the target bar. Attentional load was controlled by set-size and masking strength by the stimulus onset asynchrony between the target bar and the mask ring. We investigated interactions between masking and attention by analyzing two different aspects of performance: (i) the mean absolute response errors and (ii) the distribution of signed response errors. Our results show that attention affects observers' performance without interacting with masking. Statistical modeling of response errors suggests that attention and metacontrast masking exert their effects by independently modulating the probability of "guessing" behavior. Implications of our findings for models of attention are discussed.

Accelerated Adoption of Smoke-Free Laws After Ratification of the World Health Organization Framework Convention on Tobacco Control

PubMed Central

Uang, Randy; Hiilamo, Heikki

2016-01-01

Objectives. We sought to evaluate the effect of ratifying the World Health Organization Framework Convention on Tobacco Control (FCTC) on countries enacting smoke-free laws covering indoor workplaces, restaurants, and bars. Methods. We compared adoption of smoke-free indoor workplace, restaurant, and bar laws in countries that did versus did not ratify the FCTC, accounting for years since the ratification of the FCTC and for countries’ World Bank income group. Results. Ratification of the FCTC significantly (P < .001) increased the probability of smoke-free laws. This effect faded with time, with a half-life of 3.1 years for indoor workplaces and 3.8 years for restaurants and bars. Compared with high-income countries, upper-middle–income countries had a significantly higher probability of smoke-free indoor workplace laws. Conclusions. The FCTC accelerated the adoption of smoke-free indoor workplace, restaurant, and bar laws, with the greatest effect in the years immediately following ratification. The policy implication is that health advocates must increase efforts to secure implementation of FCTC smoke-free provisions in countries that have not done so. PMID:26562125

Bad nights or bad bars? Multi-level analysis of environmental predictors of aggression in late-night large-capacity bars and clubs.

PubMed

Graham, Kathryn; Bernards, Sharon; Osgood, D Wayne; Wells, Samantha

2006-11-01

To clarify environmental predictors of bar-room aggression by differentiating relationships due to nightly variations versus across bar variations, frequency versus severity of aggression and patron versus staff aggression. Male-female pairs of researcher-observers conducted 1334 observations in 118 large capacity (> 300) bars and clubs in Toronto, Canada. Observers independently rated aspects of the environment (e.g. crowding) at every visit and wrote detailed narratives of each incident of aggression that occurred. Measures of severity of aggression for the visit were calculated by aggregating ratings for each person in aggressive incidents. Although bivariate analyses confirmed the significance of most environmental predictors of aggression identified in previous research, multivariate analyses identified the following key visit-level predictors (controlling for bar-level relationships): rowdiness/permissive environment and people hanging around after closing predicted both frequency and severity of aggression; sexual activity, contact and competition and people with two or more drinks at closing predicted frequency but not severity of aggression; lack of staff monitoring predicted more severe patron aggression, while having more and better coordinated staff predicted more severe staff aggression. Intoxication of patrons was significantly associated with more frequent and severe patron aggression at the bar level (but not at the visit level) in the multivariate analyses and negatively associated with severity of staff aggression at the visit level. The results demonstrate clearly the importance of the immediate environment (not just the type of bar or characteristics of usual patrons) and the importance of specific environmental factors, including staff behaviour, in predicting both frequency and severity of aggression.

A Modern Picture of Barred Galaxy Dynamics

NASA Astrophysics Data System (ADS)

Petersen, Michael; Weinberg, Martin; Katz, Neal

2018-01-01

Observations of disk galaxies suggest that bars are responsible for altering global galaxy parameters (e.g. structures, gas fraction, star formation rate). The canonical understanding of the mechanisms underpinning bar-driven secular dynamics in disk galaxies has been largely built upon the analysis of linear theory, despite galactic bars being clearly demonstrated to be nonlinear phenomena in n-body simulations. We present simulations of barred Milky Way-like galaxy models designed to elucidate nonlinear barred galaxy dynamics. We have developed two new methodologies for analyzing n-body simulations that give the best of both powerful analytic linear theory and brute force simulation analysis: orbit family identification and multicomponent torque analysis. The software will be offered publicly to the community for their own simulation analysis.The orbit classifier reveals that the details of kinematic components in galactic disks (e.g. the bar, bulge, thin disk, and thick disk components) are powerful discriminators of evolutionary paradigms (i.e. violent instabilities and secular evolution) as well as the basic parameters of the dark matter halo (mass distribution, angular momentum distribution). Multicomponent torque analysis provides a thorough accounting of the transfer of angular momentum between orbits, global patterns, and distinct components in order to better explain the underlying physics which govern the secular evolution of barred disk galaxies.Using these methodologies, we are able to identify the successes and failures of linear theory and traditional n-body simulations en route to a detailed understanding of the control bars exhibit over secular evolution in galaxies. We present explanations for observed physical and velocity structures in observations of barred galaxies alongside predictions for how structures will vary with dynamical properties from galaxy to galaxy as well as over the lifetime of a galaxy, finding that the transfer of angular momentum through previously unidentified channels can more fully explain the observed dynamics.

Stabilization of a gravel channel by large streamside obstructions and bedrock bends, Jacoby Creek, northwestern California

Treesearch

Thomas E. Lisle

1996-01-01

Abstract - Jacoby Creek (bed width =12 m; bankfull discharge = 32.6 m 3 /s) contains stationary gravel bars that have forms and positions controlled by numerous large streamside obstructions (bedrock outcrops, large woody debris, and rooted bank projections) and bedrock bends. Bank-projection width and bar volume measured in 104 channel segments 1 bed-width long are...

The Escherichia coli BarA-UvrY Two-Component System Is Needed for Efficient Switching between Glycolytic and Gluconeogenic Carbon Sources

PubMed Central

Pernestig, Anna-Karin; Georgellis, Dimitris; Romeo, Tony; Suzuki, Kazushi; Tomenius, Henrik; Normark, Staffan; Melefors, Öjar

2003-01-01

The Escherichia coli BarA and UvrY proteins were recently demonstrated to constitute a novel two-component system, although its function has remained largely elusive. Here we show that mutations in the sensor kinase gene, barA, or the response regulator gene, uvrY, in uropathogenic E. coli drastically affect survival in long-term competition cultures. Using media with gluconeogenic carbon sources, the mutants have a clear growth advantage when competing with the wild type, but using media with carbon sources feeding into the glycolysis leads to a clear growth advantage for the wild type. Results from competitions with mutants in the carbon storage regulation system, CsrA/B, known to be a master switch between glycolysis and gluconeogenesis, led us to propose that the BarA-UvrY two-component system controls the Csr system. Taking these results together, we propose the BarA-UvrY two-component system is crucial for efficient adaptation between different metabolic pathways, an essential function for adaptation to a new environment. PMID:12533459

PubMed Central

Wassef, H. H.; Fox, E.; Abbatte, E. A.; Tolédo, J. F.; Rodier, G.

1989-01-01

Sexually transmitted diseases (STDs) are an increasing public health problem in Djibouti. The authors have attempted to obtain basic information on the level of knowledge concerning STDs and on the sexual behaviour of highly sexually promiscuous individuals for use in the organization of future STD control programmes; the information was obtained from a population of 213 bar hostesses, 66 unlicensed prostitutes, and 115 male sufferers from STDs. The level of knowledge of these diseases was very high among the prostitutes and the bar hostesses, except that little was known about syphilis by the bar hostesses; the male sufferers were relatively ignorant concerning both syphilis and AIDS. Medical and paramedical personnel do not figure among the sources given for knowledge of STDs. On the other hand, friends play an important role in this knowledge, especially among unlicensed prostitutes. The second most frequently instanced source was radio and TV. The bar hostesses and the unlicensed prostitutes often exhibited distinct social characteristics. Neither education nor marriage appeared to prevent men from contracting STDs. The use of condoms is extremely rare among STD patients and not very common among unlicensed prostitutes. Half the bar hostesses report their frequent use. PMID:2611976

Effects of experimental removal of barred owls on population demography of northern spotted owls in Washington and Oregon—2016 progress report

USGS Publications Warehouse

Wiens, J. David; Dugger, Katie M.; Lewicki, Krista E.; Simon, David C.

2017-04-13

Evidence indicates that competition with invasive barred owls (Strix varia) is causing rapid declines in populations of northern spotted owls (S. occidentalis caurina), and that the long-term persistence of spotted owls may be in question without additional management intervention. A pilot study in California showed that removal of barred owls in combination with habitat conservation may be able to slow or even reverse population declines of spotted owls at local scales, but it remains unknown whether similar results can be obtained in areas with different forest conditions and a greater density of barred owls. In 2015, we implemented a before-after-control-impact (BACI) experimental design on three study areas in Oregon and Washington with at least 20 years of pre-treatment demographic data on spotted owls to determine if removal of barred owls can improve localized population trends of spotted owls. Here, we report on research accomplishments and preliminary results from the first 21 months (March 2015–December 2016) of the planned 5-year experiment.

Smooth moves: bar and nightclub tobacco promotions that target young adults.

PubMed

Sepe, Edward; Ling, Pamela M; Glantz, Stanton A

2002-03-01

This article describes the tobacco industry's use of bars and nightclubs to encourage smoking among young adults. Previously secret tobacco industry marketing documents were analyzed. Tobacco industry bar and nightclub promotions in the 1980s and 1990s included aggressive advertising, tobacco brand--sponsored activities, and distribution of samples. Financial incentives for club owners and staff were used to encourage smoking through peer influence. Increased use of these strategies occurred concurrently with an increase in smoking among persons aged 18 through 24 years. The tobacco industry's bar and nightclub promotions are not yet politically controversial and are not regulated by the 1998 Master Settlement Agreement between the industry and the states. Tobacco control advocates should include young adults in research and advocacy efforts and should design interventions to counter this industry strategy to solidify smoking patterns and recruit young adult smokers.

Smooth Moves: Bar and Nightclub Tobacco Promotions That Target Young Adults

PubMed Central

Sepe, Edward; Ling, Pamela M.; Glantz, Stanton A.

2002-01-01

Objectives. This article describes the tobacco industry's use of bars and nightclubs to encourage smoking among young adults. Methods. Previously secret tobacco industry marketing documents were analyzed. Results. Tobacco industry bar and nightclub promotions in the 1980s and 1990s included aggressive advertising, tobacco brand–sponsored activities, and distribution of samples. Financial incentives for club owners and staff were used to encourage smoking through peer influence. Increased use of these strategies occurred concurrently with an increase in smoking among persons aged 18 through 24 years. Conclusions. The tobacco industry's bar and nightclub promotions are not yet politically controversial and are not regulated by the 1998 Master Settlement Agreement between the industry and the states. Tobacco control advocates should include young adults in research and advocacy efforts and should design interventions to counter this industry strategy to solidify smoking patterns and recruit young adult smokers. PMID:11867322

A Kolsky tension bar technique using a hollow incident tube

NASA Astrophysics Data System (ADS)

Guzman, O.; Frew, D. J.; Chen, W.

2011-04-01

Load control of the incident pulse profiles in compression Kolsky bar experiments has been widely used to subject the specimen to optimal testing conditions. Tension Kolsky bars have been used to determine dynamic material behavior since the 1960s with limited capability to shape the loading pulses due to the pulse-generating mechanisms. We developed a modified Kolsky tension bar where a hollow incident tube is used to carry the incident stress waves. The incident tube also acts as a gas gun barrel that houses the striker for impact. The main advantage of this new design is that the striker impacts on an impact cap of the incident tube. Compression pulse shapers can be attached to the impact cap, thus fully utilizing the predictive compression pulse-shaping capability in tension experiments. Using this new testing technique, the dynamic tensile material behavior for Al 6061-T6511 and TRIP 800 (transformation-induced plasticity) steel has been obtained.

High-resolution smile measurement and control of wavelength-locked QCW and CW laser diode bars

NASA Astrophysics Data System (ADS)

Rosenkrantz, Etai; Yanson, Dan; Klumel, Genady; Blonder, Moshe; Rappaport, Noam; Peleg, Ophir

2018-02-01

High-power linewidth-narrowed applications of laser diode arrays demand high beam quality in the fast, or vertical, axis. This requires very high fast-axis collimation (FAC) quality with sub-mrad angular errors, especially where laser diode bars are wavelength-locked by a volume Bragg grating (VBG) to achieve high pumping efficiency in solid-state and fiber lasers. The micron-scale height deviation of emitters in a bar against the FAC lens causes the so-called smile effect with variable beam pointing errors and wavelength locking degradation. We report a bar smile imaging setup allowing FAC-free smile measurement in both QCW and CW modes. By Gaussian beam simulation, we establish optimum smile imaging conditions to obtain high resolution and accuracy with well-resolved emitter images. We then investigate the changes in the smile shape and magnitude under thermal stresses such as variable duty cycles in QCW mode and, ultimately, CW operation. Our smile measurement setup provides useful insights into the smile behavior and correlation between the bar collimation in QCW mode and operating conditions under CW pumping. With relaxed alignment tolerances afforded by our measurement setup, we can screen bars for smile compliance and potential VBG lockability prior to assembly, with benefits in both lower manufacturing costs and higher yield.

A Novel Phase-Shift Control of Semibridgeless Active Rectifier for Wireless Power Transfer

DOE PAGES

Colak, Kerim; Asa, Erdem; Bojarski, Mariusz; ...

2015-05-12

We investigated a novel phase-shift control of a semibridgeless active rectifier (S-BAR) in order to utilize the S-BAR in wireless energy transfer applications. The standard receiver-side rectifier topology is developed by replacing rectifier lower diodes with synchronous switches controlled by a phase-shifted PWM signal. Moreover, theoretical and simulation results showthat with the proposed control technique, the output quantities can be regulated without communication between the receiver and transmitter. In order to confirm the performance of the proposed converter and control, experimental results are provided using 8-, 15-, and 23-cm air gap coreless transformer which has dimension of 76 cm xmore » 76 cm, with 120-V input and the output power range of 0 to 1kW with a maximum efficiency of 94.4%.« less

Dynamics of Nearshore Sand Bars and Infra-gravity Waves: The Optimal Theory Point of View

NASA Astrophysics Data System (ADS)

Bouchette, F.; Mohammadi, B.

2016-12-01

It is well known that the dynamics of near-shore sand bars are partly controlled by the features (location of nodes, amplitude, length, period) of the so-called infra-gravity waves. Reciprocally, changes in the location, size and shape of near-shore sand bars can control wave/wave interactions which in their turn alter the infra-gravity content of the near-shore wave energy spectrum. The coupling infra-gravity / near-shore bar is thus definitely two ways. Regarding numerical modelling, several approaches have already been considered to analyze such coupled dynamics. Most of them are based on the following strategy: 1) define an energy spectrum including infra-gravity, 2) tentatively compute the radiation stresses driven by this energy spectrum, 3) compute sediment transport and changes in the seabottom elevation including sand bars, 4) loop on the computation of infra-gravity taking into account the morphological changes. In this work, we consider an alternative approach named Nearshore Optimal Theory, which is a kind of breakdown point of view for the modeling of near-shore hydro-morphodynamics and wave/ wave/ seabottom interactions. Optimal theory applied to near-shore hydro-morphodynamics arose with the design of solid coastal defense structures by shape optimization methods, and is being now extended in order to model dynamics of any near-shore system combining waves and sand. The basics are the following: the near-shore system state is through a functional J representative of the energy of the system in some way. This J is computed from a model embedding the physics to be studied only (here hydrodynamics forced by simple infra-gravity). Then the paradigm is to say that the system will evolve so that the energy J tends to minimize. No really matter the complexity of wave propagation nor wave/bottom interactions. As soon as J embeds the physics to be explored, the method does not require a comprehensive modeling. Near-shore Optimal Theory has already given promising results for the generation of near-shore sand bar from scratch and their growth when forced by fair-weather waves. Here, we use it to explore the coupling between a very simple infra-gravity content and the nucleation of near-shore sand-bars. It is shown that even a very poor infra-gravity content strongly improves the generation of sand bars.

[Analysis of factors predicting early unplanned readmissions].

PubMed

Di Domenico, Gabriella; Tersigni, Ivan; Federico, Bruno; Leuter, Cinzia

2016-01-01

OBIETTIVI: determinare i fattori associati ai ricoveri ripetuti per identificare i pazienti a rischio di riospedalizzazione entro i 30 giorni dalla dimissione. DISEGNO: analisi retrospettiva delle dimissioni nell'anno 2013 attraverso le schede di dimissione ospedaliera (SDO). 3.900 pazienti ricoverati presso il presidio ospedaliero "Fabrizio Spaziani" di Frosinone. PRINCIPALI MISURE DI OUTCOME: analisi bivariata per l'analisi dell'associazione tra variabili. La regressione logistica è stata utilizzata per identificare i fattori di rischio associati al ricovero ripetuto. RISULTATI: tra i 3.900 pazienti considerati, il 12,8% ha avuto una riammissione non programmata entro un mese dalla dimissione precedente per le stesse categorie diagnostiche principali (MCD). Sono state rilevate differenze statisticamente significative tra i pazienti con e senza ricovero ripetuto per età, durata della degenza, titolo di studio, condizione occupazionale e diagnosi. I fattori che aumentano la probabilità di una riospedalizzazione sono il vivere da solo, la condizione di pensionato o casalinga, una degenza più lunga e alcune diagnosi, fra cui malattie dell'apparato respiratorio, del sistema nervoso e dell'apparato urinario. CONCLUSIONE: alcune caratteristiche sociodemografiche e la diagnosi dei pazienti ospedalizzati sono associate al rischio di riospedalizzazione entro 30 giorni dalla dimissione. I dati disponibili nell'archivio delle SDO possono essere utilizzati per un'identificazione dei pazienti a rischio sui quali definire specifici piani di dimissione.

Consuming Lower-Protein Nutrition Bars with Added Leucine Elicits Postprandial Changes in Appetite Sensations in Healthy Women.

PubMed

Bolster, Douglas R; Rahn, Maike; Kamil, Alison G; Bristol, Lindsey T; Goltz, Shellen R; Leidy, Heather J; Blaze Mt, Melvin; Nunez, Michael A; Guo, Elizabeth; Wang, Jianquan; Harkness, Laura S

2018-04-20

Higher-protein meals (>25 g protein/meal) have been associated with enhanced satiety but the role of amino acids is unclear. Leucine has been proposed to stimulate satiety in rodents but has not been assessed in humans. We assessed the acute effects of lower-protein nutrition bars, enhanced with a leucine peptide (LP), on postprandial appetite sensations in combination with plasma leucine and peptide YY (PYY) in healthy women. Utilizing a double-blind randomized crossover design, 40 healthy women [28 ± 7.5 y; body mass index (BMI, in kg/m2): 23.5 ± 2.4] consumed the following isocaloric (180 kcal) pre-loads on 3 separate visits: control bar [9 g protein with 0 g added LP (0-g LP)] or treatment bars [11 g protein with 2 g added LP (2-g LP) or 13 g protein with 3 g added LP (3-g LP)]. Pre- and postprandial hunger, desire to eat, prospective food consumption (PFC), fullness, and plasma leucine were assessed every 30 min for 240 min. Plasma PYY was assessed hourly for 240 min (n = 24). Main effects of time (P < 0.0001) and treatment (P < 0.03) were detected for postprandial hunger, desire to eat, PFC, and fullness. Post hoc analyses revealed that the 2-g and 3-g LP bars elicited greater increases in fullness and greater decreases in PFC compared with 0-g LP (all, P < 0.05) with no differences between the 2-g and 3-g LP bars. The 2-g bar elicited greater decreases in hunger and desire to eat compared with the 0-g LP bar (both, P ≤ 0.01), whereas 3-g LP did not. Appetite incremental areas under the curves (iAUCs) and PYY outcomes were not different between bars. A treatment × time interaction was detected for plasma leucine with increases occurring in a leucine-dose-dependent manner (P < 0.0001). Despite the dose-dependent increases in plasma leucine following the consumption of lower-protein bars enhanced with LP, only the 2-g LP bar elicited consistent postprandial changes in select appetite sensations compared with the 0-g LP bar. This study was registered on clinicaltrials.gov as NCT02091570.

Biomechanical and Cost Comparisons of Near-Far and Pin-Bar Constructs.

PubMed

Whitney Kluk, Augusta; Zhang, Tina; Russell, Joseph P; Kim, Hyunchul; Hsieh, Adam H; O'Toole, Robert V

2017-03-01

Orthopedic dogma states that external fixator stiffness is improved by placing 1 pin close to the fracture and 1 as distant as possible ("near-far"). This fixator construct is thought to be less expensive than placing pins a shorter distance apart and using "pin-bar" clamps that attach pins to outriggers. The authors therefore hypothesized that the near-far construct is stiffer and less expensive. They compared mechanical stiffness and costs of near-far and pin-bar constructs commonly used for temporary external fixation of femoral shaft fractures. Their testing model simulated femoral shaft fractures in damage control situations. Fourth-generation synthetic femora (n=18) were used. The near-far construct had 2 pins that were 106 mm apart, placed 25 mm from the gap on each side of the fracture. The pin-bar construct pins were 55 mm apart, placed 40 mm from the gap. Mechanical testing was performed on a material test system machine. Stiffness was determined in the linear portion of the load-displacement curve for both constructs in 4 modes: axial compression, torsional loading, frontal plane 3-point bending, and sagittal plane 3-point bending. Costs were determined from a 2012 price guide. Compared with the near-far construct, the pin-bar construct had stiffness increased by 58% in axial compression (P<.05) and by 52% in torsional loading (P<.05). The pin-bar construct increased cost by 11%. In contrast to the authors' hypothesis and existing orthopedic dogma, the near-far construct was less stiff than the pin-bar construct and was similarly priced. Use of the pin-bar construct is mechanically and economically reasonable. [Orthopedics. 2017; 40(2):e238-e241.]. Copyright 2016, SLACK Incorporated.

Does a tow-bar increase the risk of neck injury in rear-end collisions?

PubMed

Olesen, Anne Vingaard; Elvik, Rune; Andersen, Camilla Sloth; Lahrmann, Harry S

2018-06-01

Does a tow-bar increase the risk of neck injury in the struck car in a rear-end collision? The rear part of a modern car has collision zones that are rendered nonoperational when the car is equipped with a tow-bar. Past crash tests have shown that a car's acceleration was higher in a car equipped with a tow-bar and also that a dummy placed in a car with a tow-bar had higher peak acceleration in the lower neck area. This study aimed to investigate the association between the risk of neck injury in drivers and passengers, and the presence of a registered tow-bar on the struck car in a rear-end collision. We performed a merger of police reports, the National Hospital Discharge Registry, and the National Registry of Motor Vehicles in Denmark. We identified 9,370 drivers and passengers of whom 1,519 were diagnosed with neck injury within the first year after the collision. We found a statistically insignificant 5% decrease in the risk of neck injury in the occupants of the struck car when a tow-bar was fitted compared to when it was not fitted (hazard ratio=0.95; 95% confidence level=0.85-1.05; p=0.32). The result was controlled for gender, age, and the seat of the occupant. Several other collision and car characteristics and demographic information on the drivers and passengers were evaluated as confounders but were not statistically significant. The present study may serve as valuable input for a meta-analysis on the effect of a tow-bar because negative results are necessary in order to avoid publication bias. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

The opercular mouth-opening mechanism of largemouth bass functions as a 3D four-bar linkage with three degrees of freedom.

PubMed

Olsen, Aaron M; Camp, Ariel L; Brainerd, Elizabeth L

2017-12-15

The planar, one degree of freedom (1-DoF) four-bar linkage is an important model for understanding the function, performance and evolution of numerous biomechanical systems. One such system is the opercular mechanism in fishes, which is thought to function like a four-bar linkage to depress the lower jaw. While anatomical and behavioral observations suggest some form of mechanical coupling, previous attempts to model the opercular mechanism as a planar four-bar have consistently produced poor model fits relative to observed kinematics. Using newly developed, open source mechanism fitting software, we fitted multiple three-dimensional (3D) four-bar models with varying DoF to in vivo kinematics in largemouth bass to test whether the opercular mechanism functions instead as a 3D four-bar with one or more DoF. We examined link position error, link rotation error and the ratio of output to input link rotation to identify a best-fit model at two different levels of variation: for each feeding strike and across all strikes from the same individual. A 3D, 3-DoF four-bar linkage was the best-fit model for the opercular mechanism, achieving link rotational errors of less than 5%. We also found that the opercular mechanism moves with multiple degrees of freedom at the level of each strike and across multiple strikes. These results suggest that active motor control may be needed to direct the force input to the mechanism by the axial muscles and achieve a particular mouth-opening trajectory. Our results also expand the versatility of four-bar models in simulating biomechanical systems and extend their utility beyond planar or single-DoF systems. © 2017. Published by The Company of Biologists Ltd.

Developments and trends in fruit bar production and characterization.

PubMed

Orrego, C E; Salgado, N; Botero, C A

2014-01-01

Fruits serve as a source of energy, vitamins, minerals, and dietary fiber. One of the barriers in increasing fruit and vegetables consumption is time required to prepare them. Overall, fruit bars have a far greater nutritional value than the fresh fruits because all nutrients are concentrated and, therefore, would be a convenience food assortment to benefit from the health benefits of fruits. The consumers prefer fruit bars that are more tasted followed by proper textural features that could be obtained by establishing the equilibrium of ingredients, the proper choosing of manufacturing stages and the control of the product final moisture content. Fruit bar preparations may include a mixture of pulps, fresh or dried fruit, sugar, binders, and a variety of minor ingredients. Additionally to the conventional steps of manufacturing (pulping, homogenizing, heating, concentrating, and drying) there have been proposed the use of gelled fruit matrices, dried gels or sponges, and extruders as new trends for processing fruit bars. Different single-type dehydration or combined methods include, in order of increasing process time, air-infrared, vacuum and vacuum-microwave drying convective-solar drying, convective drying, and freeze drying are also suggested as alternative to solar traditional drying stage. The dehydration methods that use vacuum exhibited not only higher retention of antioxidants but also better color, texture, and rehydration capacity. Antioxidant activity resulting from the presence of phenolic compounds in the bars is well established. Besides this, fruit bars are also important sources of carbohydrates and minerals. Given the wide range of bioactive factors in fresh fruits that are preserved in fruit bars, it is plausible that their uptake consumption have a positive effect in reducing the risk of many diseases.

Comparison of Planting Bar and Hoedad Planted Seedlings For Survival and Growth in a Controlled Environment

Treesearch

John C. Adams; William B. Patterson

2004-01-01

In the Western Gulf Region of the United States, the traditional tool for planting loblolly pine (Pinus taeda L.) has been the dibble (planting bar). In the past decade an increasing number of acres have been planted with the hoedad. In areas where both tools were and are used, discussion about the superiority of one tool over the other for survival...

Recent Measurement of Flavor Asymmetry of Antiquarks in the Proton by Drell–Yan Experiment SeaQuest at Fermilab

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nagai, Kei

A measurement of the flavor asymmetry of the antiquarks (more » $$\\bar{d}$$ and $$\\bar{u}$$) in the proton is described in this thesis. The proton consists of three valence quarks, sea quarks, and gluons. Antiquarks in the proton are sea quarks. They are generated from the gluon splitting: g → q + $$\\bar{q}$$. According to QCD (Quantum Chromodynamics), the gluon splitting is independent of quark flavor. It suggests that the amounts of $$\\bar{d}$$ and $$\\bar{u}$$ should be the same in the proton. However, the NMC experiment at CERN found that the amount of $$\\bar{d}$$ is larger than that of $$\\bar{u}$$ in the proton using the deep inelastic scattering in 1991. This result is obtained for $$\\bar{d}$$ and $$\\bar{u}$$ integrated over Bjorken x. Bjorken x is the fraction of the momentum of the parton to that of the proton. The NA51 experiment (x ~ 0.2) at CERN and E866/NuSea experiment (0.015 < x < 0.35) at Fermilab measured the flavor asymmetry of the antiquarks ($$\\bar{d}$$/$$\\bar{u}$$) in the proton as a function of x using Drell–Yan process. The experiments reported that the flavor symmetry is broken over all measured x values. Understanding the flavor asymmetry of the antiquarks in the proton is a challenge of the QCD. The theo- retical investigation from the first principle of QCD such as lattice QCD calculation is important. In addition, the QCD effective models and hadron models such as the meson cloud model can also be tested with the flavor asymmetry of antiquarks. From the experimental side, it is important to measure with higher accuracy and in a wider x range. The SeaQuest (E906) experiment measures $$\\bar{d}$$/$$\\bar{u}$$ at large x (0.15 < x < 0.45) accurately to understand its behavior. The SeaQuest experiment is a Drell–Yan experiment at Fermi National Accelerator Laboratory (Fermilab). In the Drell–Yan process of proton-proton reaction, an antiquark in a proton and a quark in another proton annihilate and create a virtual photon, which then decays into a muon pair (q$$\\bar{q}$$ → γ* → µ +µ -). The SeaQuest experiment uses a 120 GeV proton beam extracted from Fermilab’s Main Injector. The proton beam interacts with hydrogen and deuterium targets. The SeaQuest spectrometer detects the muon pairs from the Drell–Yan process. The $$\\bar{d}$$/$$\\bar{u}$$ ratio at 0.1 < x < 0.58 is extracted from the number of detected Drell–Yan muon pairs. After the detector construction, commissioning run and detector upgrade, the SeaQuest experiment started the physics data acquisition from 2013. We finished so far three periods of physics data acquisition. The fourth period is in progress. The detector construction, detector performance evaluation, data taking and data analysis for the flavor asymmetry of the antiquarks $$\\bar{d}$$/$$\\bar{u}$$ in the proton are my contribution to SeaQuest. The cross section ratio of Drell–Yan process in p- p and p-d reactions is obtained from dimuon yields. In the experiment with high beam intensity, it is important to control the tracking efficiency of charged particles through the magnetic spectrometer. The tracking efficiency depends on the chamber occupancy, and the appropriate method for the correction is important. The chamber occupancy is the number of hits in drift chambers. A new method of the correction for the tracking efficiency is developed based on the occupancy, and applied to the data. This method reflects the real response of the drift chambers. Therefore, the systematic error is well controlled by this method. The flavor asymmetry of antiquarks is obtained at 0.1 < x < 0.58. At 0.1 < x < 0.45, the result is $$\\bar{d}$$/$$\\bar{u}$$ > 1. The result at 0.1 < x < 0.24 agrees with the E866 result. The result at x > 0.24, however, disagrees with the E866 result. The result at 0.45 < x < 0 the statistical errors. u¯ results extracted from experiments are used to investigate the validity of the theoretical models. The present experimental result provides the data points in wide x region. It is useful for understanding the proton structure in the light of QCD and effective hadron models. The present result has a practical application as well. Antiquark distributions are important as inputs to simulations of hadron reactions such as W± production in various experiments. The new knowledge on antiquark distributions helps to improve the precision of the simulations.« less

The Hermann-Hering grid illusion demonstrates disruption of lateral inhibition processing in diabetes mellitus.

PubMed

Davies, Nigel P; Morland, Antony B

2002-02-01

The Hermann-Hering grid illusion consists of dark illusory spots perceived at the intersections of horizontal and vertical white bars viewed against a dark background. The dark spots originate from lateral inhibition processing. This illusion was used to investigate the hypothesis that lateral inhibition may be disrupted in diabetes mellitus. A computer monitor based psychophysical test was developed to measure the threshold of perception of the illusion for different bar widths. The contrast threshold for illusion perception at seven bar widths (range 0.09 degrees to 0.60 degrees) was measured using a randomly interleaved double staircase. Convolution of Hermann-Hering grids with difference of Gaussian receptive fields was used to generate model sensitivity functions. The method of least squares was used to fit these to the experimental data. 14 diabetic patients and 12 control subjects of similar ages performed the test. The sensitivity to the illusion was significantly reduced in the diabetic group for bar widths 0.22 degrees, 0.28 degrees, and 0.35 degrees (p = 0.01). The mean centre:surround ratio for the controls was 1:9.1 (SD 1.6) with a mean correlation coefficient of R(2) = 0.80 (SD 0.16). In the diabetic group, two subjects were unable to perceive the illusion. The mean centre:surround ratio for the 12 remaining diabetic patients was 1:8.6 (SD 2.1). However, the correlation coefficients were poor with a mean of R(2) = 0.54 (SD 0.27), p = 0.04 in comparison with the control group. A difference of Gaussian receptive field model fits the experimental data well for the controls but does not fit the data obtained for the diabetics. This indicates dysfunction of the lateral inhibition processes in the post-receptoral pathway.

Gravel sediment routing from widespread, low-intensity landscape disturbance, Current River basin, Missouri

USGS Publications Warehouse

Jacobson, Robert B.; Gran, K.B.

1999-01-01

During the last 160 years, land-use changes in the Ozarks have had the potential to cause widespread, low-intensity delivery of excess amounts of gravel-sized sediment to stream channels. Previous studies have indicated that this excess gravel bedload is moving in wave-like forms through Ozarks drainage basins. The longitudinal, areal distribution of gravel bars along 160 km of the Current River, Missouri, was evaluated to determine the relative effects of valley-scale controls, tributary basin characteristics, and lagged sediment transport in creating areas of gravel accumulations. The longitudinal distribution of gravel-bar area shows a broad scale wave-like form with increases in gravel-bar area weakly associated with tributary junctions. Secondary peaks of gravel area with 1·8–4·1 km spacing (disturbance reaches) are superimposed on the broad form. Variations in valley width explain some, but not all, of the short-spacing variation in gravel-bar area. Among variables describing tributary drainage basin morphometry, present-day land use and geologic characteristics, only drainage area and road density relate even weakly to gravel-bar areal inventories. A simple, channel network-based sediment routing model shows that many of the features of the observed longitudinal gravel distribution can be replicated by uniform transport of sediment from widespread disturbances through a channel network. These results indicate that lagged sediment transport may have a dominant effect on the synoptic spatial distribution of gravel in Ozarks streams; present-day land uses are only weakly associated with present-day gravel inventories; and valley-scale characteristics have secondary controls on gravel accumulations in disturbance reaches.

Alcohol Mixed with Energy Drink Use as an Event-Level Predictor of Physical and Verbal Aggression in Bar Conflicts.

PubMed

Miller, Kathleen E; Quigley, Brian M; Eliseo-Arras, Rebecca K; Ball, Natalie J

2016-01-01

Young adult use of alcohol mixed with caffeinated energy drinks (AmEDs) has been globally linked with increased odds of interpersonal aggression, compared with the use of alcohol alone. However, no prior research has linked these behaviors at the event level in bar drinking situations. The present study assessed whether AmED use is associated with the perpetration of verbal and physical aggression in bar conflicts at the event level. In Fall 2014, a community sample of 175 young adult AmED users (55% female) completed a web survey describing a recent conflict experienced while drinking in a bar. Use of both AmED and non-AmED alcoholic drinks in the incident were assessed, allowing calculation of our main predictor variable, the proportion of AmEDs consumed (AmED/total drinks consumed). To measure perpetration of aggression, participants reported on the occurrence of 6 verbal and 6 physical acts during the bar conflict incident. Linear regression analyses showed that the proportion of AmEDs consumed predicted scores for perpetration of both verbal aggression (β = 0.16, p < 0.05) and physical aggression (β = 0.19, p < 0.01) after controlling for gender, age, sensation-seeking and aggressive personality traits, aggressive alcohol expectancies, aggressogenic physical and social bar environments, and total number of drinks. Results of this study suggest that in alcohol-related bar conflicts, higher levels of young adult AmED use are associated with higher levels of aggression perpetration than alcohol use alone and that the elevated risk is not attributable to individual differences between AmED users and nonusers or to contextual differences in bar drinking settings. While future research is needed to identify motivations, dosages, and sequencing issues associated with AmED use, these beverages should be considered a potential risk factor in the escalation of aggressive bar conflicts. Copyright © 2016 by the Research Society on Alcoholism.

Numerical modeling of barred spiral galaxies

NASA Astrophysics Data System (ADS)

Moore, Elizabeth Mary

1992-08-01

A two-component, self-consistent computer code to model spiral galaxies was written and tested and a method of inducing and controlling bar formation is developed. This work presents a departure from former modeling work done at the University of Florida, which depended on the beam scheme, a hydrodynamical code with a number of limitations. In particular, only the gas component could be modeled, no self-gravitational forces were included, and the viscosity inherent to the code could not be controlled easily. These shortcomings are overcome in the new algorithm. Most importantly, an attempt has been made to keep the models self-consistent. No perturbing potentials are imposed or required to excite bar and spiral structure. The code can model both the stellar and the gaseous component of a spiral galaxy. The stellar component feels only gravitational forces, while the gas component feels both gravitational and viscous forces. In addition, a halo force can be imposed for the purpose of stabilizing the disk. The code is a hybrid grid/smooth particle code. The gravitational forces are calculated on a Cartesian grid using a Fast Fourier Transform, while the gas viscous forces are calculated in a smooth particle manner. A mechanism for creating warm, featureless, stable disks is developed by taking moments of the collision less Boltzmann equation. In order to induce and control bar and spiral arm formation, the stabilizing stellar velocity dispersions are reduced in the center of the disk, but maintained in the outer regions. A bar forms naturally in the interior and the rotation of this bar helps maintain spiral structure in the outer gas disk. Realistic-looking spiral features are maintained in the gas component for as long as the models are calculated. A wide variety of bar and spiral structure can be formed by varying the size of the unstable central region, the rate of 'turn on', of the heating and the halo mass. We would like to test the model results by comparing them with observations and so a second part of the thesis consists of observing and reducing 21 cm line data of NGC 1398 and NGC 1784 at the Very Large Array. Low (C/D array) and high (B/C) resolution data were obtained, calibrated and combined to make maps of the integrated column density and mean radial velocity of the neutral hydrogen.

Effects of Easy-to-Use Protein-Rich Energy Bar on Energy Balance, Physical Activity and Performance during 8 Days of Sustained Physical Exertion

PubMed Central

Tanskanen, Minna M.; Westerterp, Klaas R.; Uusitalo, Arja L.; Atalay, Mustafa; Häkkinen, Keijo; Kinnunen, Hannu O.; Kyröläinen, Heikki

2012-01-01

Background Previous military studies have shown an energy deficit during a strenuous field training course (TC). This study aimed to determine the effects of energy bar supplementation on energy balance, physical activity (PA), physical performance and well-being and to evaluate ad libitum fluid intake during wintertime 8-day strenuous TC. Methods Twenty-six men (age 20±1 yr.) were randomly divided into two groups: The control group (n = 12) had traditional field rations and the experimental (Ebar) group (n = 14) field rations plus energy bars of 4.1 MJ•day−1. Energy (EI) and water intake was recorded. Fat-free mass and water loss were measured with deuterium dilution and elimination, respectively. The energy expenditure was calculated using the intake/balance method and energy availability as (EI/estimated basal metabolic rate). PA was monitored using an accelerometer. Physical performance was measured and questionnaires of upper respiratory tract infections (URTI), hunger and mood state were recorded before, during and after TC. Results Ebar had a higher EI and energy availability than the controls. However, decreases in body mass and fat mass were similar in both groups representing an energy deficit. No differences were observed between the groups in PA, water balance, URTI symptoms and changes in physical performance and fat-free mass. Ebar felt less hunger after TC than the controls and they had improved positive mood state during the latter part of TC while controls did not. Water deficit associated to higher PA. Furthermore, URTI symptoms and negative mood state associated negatively with energy availability and PA. Conclusion An easy-to-use protein-rich energy bars did not prevent energy deficit nor influence PA during an 8-day TC. The high content of protein in the bars might have induced satiation decreasing energy intake from field rations. PA and energy intake seems to be primarily affected by other factors than energy supplementation such as mood state. PMID:23094083

Tool setting device

DOEpatents

Brown, Raymond J.

1977-01-01

The present invention relates to a tool setting device for use with numerically controlled machine tools, such as lathes and milling machines. A reference position of the machine tool relative to the workpiece along both the X and Y axes is utilized by the control circuit for driving the tool through its program. This reference position is determined for both axes by displacing a single linear variable displacement transducer (LVDT) with the machine tool through a T-shaped pivotal bar. The use of the T-shaped bar allows the cutting tool to be moved sequentially in the X or Y direction for indicating the actual position of the machine tool relative to the predetermined desired position in the numerical control circuit by using a single LVDT.

Paired Associative Stimulation Using Brain-Computer Interfaces for Stroke Rehabilitation: A Pilot Study.

PubMed

Cho, Woosang; Sabathiel, Nikolaus; Ortner, Rupert; Lechner, Alexander; Irimia, Danut C; Allison, Brendan Z; Edlinger, Guenter; Guger, Christoph

2016-06-13

Conventional therapies do not provide paralyzed patients with closed-loop sensorimotor integration for motor rehabilitation. Paired associative stimulation (PAS) uses brain-computer interface (BCI) technology to monitor patients' movement imagery in real-time, and utilizes the information to control functional electrical stimulation (FES) and bar feedback for complete sensorimotor closed loop. To realize this approach, we introduce the recoveriX system, a hardware and software platform for PAS. After 10 sessions of recoveriX training, one stroke patient partially regained control of dorsiflexion in her paretic wrist. A controlled group study is planned with a new version of the recoveriX system, which will use a new FES system and an avatar instead of bar feedback.

Effects of a Hybrid Online and In-Person Training Program Designed to Reduce Alcohol Sales to Obviously Intoxicated Patrons

PubMed Central

Toomey, Traci L.; Lenk, Kathleen M.; Erickson, Darin J.; Horvath, Keith J.; Ecklund, Alexandra M.; Nederhoff, Dawn M.; Hunt, Shanda L.; Nelson, Toben F.

2017-01-01

Objective: Overservice of alcohol (i.e., selling alcohol to intoxicated patrons) continues to be a problem at bars and restaurants, contributing to serious consequences such as traffic crashes and violence. We developed a training program for managers of bars and restaurants, eARMTM, focusing on preventing overservice of alcohol. The program included online and face-to-face components to help create and implement establishment-specific policies. Method: We conducted a large, randomized controlled trial in bars and restaurants in one metropolitan area in the midwestern United States to evaluate effects of the eARM program on the likelihood of selling alcohol to obviously intoxicated patrons. Our outcome measure was pseudo-intoxicated purchase attempts—buyers acted out signs of intoxication while attempting to purchase alcohol—conducted at baseline and then at 1 month, 3 months, and 6 months after training. We conducted intention-to-treat analyses on changes in purchase attempts in intervention (n = 171) versus control (n = 163) bars/restaurants using a Time × Condition interaction, as well as planned contrasts between baseline and follow-up purchase attempts. Results: The overall Time × Condition interaction was not statistically significant. At 1 month after training, we observed a 6% relative reduction in likelihood of selling to obviously intoxicated patrons in intervention versus control bars/restaurants. At 3 months after training, this difference widened to a 12% relative reduction; however, at 6 months this difference dissipated. None of these specific contrasts were statistically significant (p = .05). Conclusions: The observed effects of this enhanced training program are consistent with prior research showing modest initial effects followed by a decay within 6 months of the core training. Unless better training methods are identified, training programs are inadequate as the sole approach to reduce overservice of alcohol. PMID:28317507

Effect of E85 on RCCI Performance and Emissions on a Multi-Cylinder Light-Duty Diesel Engine - SAE World Congress

DOE Office of Scientific and Technical Information (OSTI.GOV)

Curran, Scott; Hanson, Reed M; Wagner, Robert M

2012-01-01

This paper investigates the effect of E85 on load expansion and FTP modal point emissions indices under reactivity controlled compression ignition (RCCI) operation on a light-duty multi-cylinder diesel engine. A General Motors (GM) 1.9L four-cylinder diesel engine with the stock compression ratio of 17.5:1, common rail diesel injection system, high-pressure exhaust gas recirculation (EGR) system and variable geometry turbocharger was modified to allow for port fuel injection with gasoline or E85. Controlling the fuel reactivity in-cylinder by the adjustment of the ratio of premixed low-reactivity fuel (gasoline or E85) to direct injected high reactivity fuel (diesel fuel) has been shownmore » to extend the operating range of high-efficiency clean combustion (HECC) compared to the use of a single fuel alone as in homogeneous charge compression ignition (HCCI) or premixed charge compression ignition (PCCI). The effect of E85 on the Ad-hoc federal test procedure (FTP) modal points is explored along with the effect of load expansion through the light-duty diesel speed operating range. The Ad-hoc FTP modal points of 1500 rpm, 1.0bar brake mean effective pressure (BMEP); 1500rpm, 2.6bar BMEP; 2000rpm, 2.0bar BMEP; 2300rpm, 4.2bar BMEP; and 2600rpm, 8.8bar BMEP were explored. Previous results with 96 RON unleaded test gasoline (UTG-96) and ultra-low sulfur diesel (ULSD) showed that with stock hardware, the 2600rpm, 8.8bar BMEP modal point was not obtainable due to excessive cylinder pressure rise rate and unstable combustion both with and without the use of EGR. Brake thermal efficiency and emissions performance of RCCI operation with E85 and ULSD is explored and compared against conventional diesel combustion (CDC) and RCCI operation with UTG 96 and ULSD.« less

A Modified Split Hopkinson Pressure Bar Approach for Mimicking Dynamic Oscillatory Stress Fluctuations During Earthquake Rupture

NASA Astrophysics Data System (ADS)

Braunagel, M. J.; Griffith, W. A.

2017-12-01

Past experimental work has demonstrated that rock failure at high strain rates occurs by fragmentation rather than discrete fracture and is accompanied by a dramatic increase in rock strength. However, these observations are difficult to reconcile with the assertion that pulverized rocks in fault zones are the product of impulsive stresses during the passage of earthquake ruptures, as the distance from the principal slip zones of some pulverized rock is too great to exceed fragmentation transition. One potential explanation to this paradox that has been suggested is that repeated loading over the course of multiple earthquake ruptures may gradually reduce the pulverization threshold, in terms of both strain rate and strength. We propose that oscillatory loading during a single earthquake rupture may further lower these pulverization thresholds, and that traditional dynamic experimental approaches, such as the Split Hopkinson Pressure Bar (SHPB) wherein load is applied as a single, smooth, sinusoidal compressive wave, may not reflect natural loading conditions. To investigate the effects of oscillatory compressive loading expected during earthquake rupture propagation, we develop a controlled cyclic loading model on a SHPB apparatus utilizing two striker bars connected by an elastic spring. Unlike traditional SHPB experiments that utilize a gas gun to fire a projectile bar and generate a single compressive wave on impact with the incident bar, our modified striker bar assembly oscillates while moving down the gun barrel and generates two separate compressive pulses separated by a lag time. By modeling the modified assembly as a mass-spring-mass assembly accelerating due to the force of the released gas, we can predict the compression time of the spring upon impact and therefore the time delay between the generation of the first and second compressive waves. This allows us to predictably control load cycles with durations of only a few hundred microseconds. Initial experimental results demonstrate that fragmentation of Westerly Granite samples occurs at lower stresses and strain rates than those expected from traditional SHPB experiments.

School Resources and Engagement in Technical Assistance Programs Is Associated with Higher Prevalence of Salad Bars in Elementary School Lunches in the United States.

PubMed

Ohri-Vachaspati, Punam; Turner, Lindsey; Adams, Marc A; Bruening, Meg; Chaloupka, Frank J

2016-03-01

Salad bars have been promoted as a strategy for increasing fruit and vegetable consumption in schools. To examine school-level resources and programs associated with the presence of salad bars in elementary schools and to assess whether there were differential changes in salad bar prevalence based on school-level resources and programs before and after the new US Department of Agriculture schools meals standards were proposed (January 2011) and implemented (July 2012). Repeated cross-sectional design. Data were collected annually between 2006-2007 and 2013. Nationally representative sample of 3,956 elementary schools participating in the National School Lunch Program. School personnel (ie, administrators and foodservice staff) provided data using a mail-back survey. Presence of salad bars in school was the primary outcome variable. School-level programs and resources were investigated as independent variables. Weighted logistic regression analyses examined associations between dependent and independent variables controlling for school demographic characteristics. Prevalence of salad bars increased significantly from 17.1% in 2006-2007 to 29.6% in 2012-2013. The prevalence of salad bars was significantly higher among schools that participated in the Team Nutrition program (odds ratio [OR] 1.37, 95% CI 1.10 to 1.70), the Fresh Fruit and Vegetable Program (OR 1.48, 95% CI 1.13 to 1.95), a Farm to School program (OR 1.77, 95% CI 1.36 to 2.33), and where school meals were provided by a foodservice management company (OR 1.46, 95% CI 1.08 to 1.97). No association was found for schools with full-service kitchen, school gardens, those offering nutrition education, or those with dietitians/nutritionists on staff. Prevalence of salad bars increased significantly after the US Department of Agriculture school meal guidelines were proposed and implemented. It is likely that schools are using salad bars to offer a variety of fruits and vegetables to students, and schools with greater numbers of school-level resources and programs are better positioned for having salad bars. Copyright © 2016 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Delamination Effect on Impact Properties of Ultrafine-Grained Low-Carbon Steel Processed by Warm Caliber Rolling

NASA Astrophysics Data System (ADS)

Inoue, Tadanobu; Yin, Fuxing; Kimura, Yuuji; Tsuzaki, Kaneaki; Ochiai, Shojiro

2010-02-01

Bulk ultrafine-grained (UFG) low-carbon steel bars were produced by caliber rolling, and the impact and tensile properties were investigated. Initial samples with two different microstructures, ferrite-pearlite and martensite (or bainite), were prepared and then caliber rolling was conducted at 500 °C. The microstructures in the rolled bars consisted of an elongated UFG structure with a strong α-fiber texture. The rolled bar consisting of spheroidal cementite particles that distributed uniformly in the elongated ferrite matrix of transverse grain sizes 0.8 to 1.0 μm exhibited the best strength-ductility balance and impact properties. Although the yield strength in the rolled bar increased 2.4 times by grain refinement, the upper-shelf energy did not change, and its value was maintained from 100 °C to -40 °C. In the rolled bars, cracks during an impact test branched parallel to the longitudinal direction of the test samples as temperatures decreased. Delamination caused by such crack branching appeared, remarkably, near the ductile-to-brittle transition temperature (DBTT). The effect of delamination on the impact properties was associated with crack propagation on the basis of the microstructural features in the rolled bars. In conclusion, the strength-toughness balance is improved by refining crystal grains and controlling their shape and orientation; in addition, delamination effectively enhances the low-temperature toughness.

Tijuana alcohol control policies: a response to cross-border high-risk drinking by young Americans.

PubMed

Romano, Eduardo; Cano, Saúl; Lauer, Elizabeth; Jiménez, Avelino; Voas, Robert B; Lange, James E

2004-06-01

Several thousand young Americans visit the bars in Tijuana, Mexico, each weekend night, raising concerns on both sides of the border. Measures implemented in San Diego, California, and Tijuana have successfully reduced the number of American visitors to Mexican bars. Although San Diego policies have been well-documented, this is the first article on investigation of measures enacted south of the border. Information on Tijuana alcohol policies was obtained from a survey of 29-36 bars from 1997 to 1999. The Tijuana police provided data on Americans arrested in Tijuana from 1998 to 1999. Our study found alcohol regulations are poorly enforced in Tijuana, suggesting that regulatory agencies are captured by bar owners. However, such a capture may be weakening. The importance of identifying and supporting Mexican interest groups, as opposed to the bar owners, as a mechanism to impede the capture of Tijuana's regulatory agencies is discussed. The number of Americans involved in alcohol-related crimes in Tijuana sharply decreased over time. However, such a success is largely related to the success of the San Diego efforts in reducing the number of American visitors to Tijuana. Also, by demonstrating the racial/ethnic heterogeneity of American visitors to Tijuana bars, our study points out the need for prevention policies designed north of the border to take such heterogeneity into account.

Smoke-free law associated with higher-than-expected taxable retail sales for bars and taverns in Washington State.

PubMed

Boles, Myde; Dilley, Julia; Maher, Julie E; Boysun, Michael J; Reid, Terry

2010-07-01

Continued progress in implementing smoke-free laws throughout the United States would benefit from documenting positive economic effects, particularly for the hospitality industry. This study describes changes in sales revenue in bars and taverns since December 2005, when a statewide smoke-free law in Washington State went into effect. Using 24 quarters of inflation-adjusted taxable retail sales data from 2002 through 2007, we fitted a regression model to estimate the effect of the smoke-free law on sales revenue, controlling for seasonality and other economic factors. We found no immediate change in bar revenues in the first quarter of 2006, but taxable retail sales grew significantly through the fourth quarter of 2007. In the 2 years after the smoke-free law was implemented, sales revenues were $105.5 million higher than expected for bars and taverns in Washington State. The higher-than-expected revenue from taxable sales in bars and taverns after the implementation of smoke-free laws in Washington State provided extra funds to the state general fund. Potential increases in revenue in other jurisdictions that implement smoke-free indoor air policies could provide funds to benefit residents of those jurisdictions.

Growth of the microalgae Neochloris oleoabundans at high partial oxygen pressures and sub-saturating light intensity.

PubMed

Sousa, Cláudia; de Winter, Lenneke; Janssen, Marcel; Vermuë, Marian H; Wijffels, René H

2012-01-01

The effect of partial oxygen pressure on growth of Neochloris oleoabundans was studied at sub-saturating light intensity in a fully-controlled stirred tank photobioreactor. At the three partial oxygen pressures tested (P(O)₂= 0.24; 0.63; 0.84 bar), the specific growth rate was 1.38; 1.36 and 1.06 day(-1), respectively. An increase of the P(CO)₂from 0.007 to 0.02 bar at P(O₂) of 0.84 bar resulted in an increase in the growth rate from 1.06 to 1.36 day(-1). These results confirm that the reduction of algal growth at high oxygen concentrations at sub-saturating light conditions is mainly caused by competitive inhibition of Rubisco. This negative effect on growth can be overcome by restoring the O(2)/CO(2) ratio by an increase in the partial carbon dioxide pressure. In comparison to general practice (P(O(2)) = 0.42 bar), working at partial O(2) pressure of 0.84 bar could reduce the energy requirement for degassing by a factor of 3-4. Copyright © 2011 Elsevier Ltd. All rights reserved.

Effects of experimental removal of Barred Owls on population demography of Northern Spotted Owls in Washington and Oregon—2017 progress report

USGS Publications Warehouse

Wiens, J. David; Dugger, Katie M.; Lesmeister, Damon B.; Dilione, Krista E.; Simon, David C.

2018-05-21

Populations of Northern Spotted Owls (Strix occidentalis caurina; hereinafter referred to as Spotted Owl) are declining throughout this subspecies’ geographic range. Evidence indicates that competition with invading populations of Barred Owls (S. varia) has contributed significantly to those declines. A pilot study in California showed that localized removal of Barred Owls coupled with conservation of suitable forest conditions can slow or even reverse population declines of Spotted Owls. It remains unknown, however, whether similar results can be obtained in areas with different forest conditions, greater densities of Barred Owls, and fewer remaining Spotted Owls. During 2015–17, we initiated a before-after-control-impact (BACI) experiment at three study areas in Oregon and Washington to determine if removal of Barred Owls can improve population trends of Spotted Owls. Each study area had at least 20 years of pre-treatment demographic data on Spotted Owls, and represented different forest conditions occupied by the two owl species in the Pacific Northwest. This report describes research accomplishments and preliminary results from the first 2.5 years (March 2015–August 2017) of the planned 5-year experiment.

The e[sup [minus

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holroyd, R.A.; Schwarz, H.A.; Stradowska, E.

The rate constants for attachment of excess electrons to 1,3-butadiene (k[sub a]) and detachment from the butadiene anion (k[sub d]) in n-hexane are reported. The equilibrium constant, K[sub eq] = k[sub a]/k[sub d], increases rapidly with pressure and decreases as the temperature increases. At -7[degree]C attachment is observed at 1 bar. At high pressures the attachment rate is diffusion controlled. The activation energy for detachment is about 21 kcal/mol; detachment is facilitated by the large entropy of activation. The reaction volumes for attachment range from -181 cm[sup 3]/mol at 400 bar to-122 cm[sup 3]/mol at 1500 bar and are largelymore » attributed to the electrostriction volume of the butadiene anion ([Delta][bar V][sub el]). Values of [Delta][bar V][sub el] calculated by a model, which includes a glassy shell of solvent molecules around the ion, are in agreement with experimental reaction volumes. The analysis indicates the partial molar volume of the electron in hexane is small and probably negative. It is shown that the entropies of reaction are closely related to the partial molar volumes of reaction. 22 refs., 5 figs., 5 tabs.« less

Jerusalem artichoke and chicory inulin in bakery products affect faecal microbiota of healthy volunteers.

PubMed

Kleessen, Brigitta; Schwarz, Sandra; Boehm, Anke; Fuhrmann, H; Richter, A; Henle, T; Krueger, Monika

2007-09-01

A study was conducted to test the effects of Jerusalem artichoke inulin (JA) or chicory inulin (CH) in snack bars on composition of faecal microbiota, concentration of faecal SCFA, bowel habit and gastrointestinal symptoms. Forty-five volunteers participated in a double-blind, randomized, placebo-controlled, parallel-group study. At the end of a 7 d run-in period, subjects were randomly assigned to three groups of fifteen subjects each, consuming either snack bars with CH or JA, or snack bars without fructans (placebo); for 7 d (adaptation period), they ingested one snack bar per day (7.7 g fructan/d) and continued for 14 d with two snack bars per day. The composition of the microbiota was monitored weekly. The consumption of CH or JA increased counts of bifidobacteria (+1.2 log10 in 21 d) and reduced Bacteroides/Prevotella in number and the Clostridium histolyticum/C. lituseburense group in frequency at the end of intervention (P < 0.05). No changes in concentration of faecal SCFA were observed. Consumption of snack bars resulted in a slight increase in stool frequency. Stool consistency was slightly affected in subjects consuming two snack bars containing CH or JA per day (P < 0.05). Consumption of CH or JA resulted in mild and sometimes moderate flatulence in a few subjects compared to placebo (P < 0.05). No structural differences were detected between CH and JA before and after processing. In conclusion, adaptation on increased doses of CH or JA in bakery products stimulates the growth of bifidobacteria and may contribute to the suppression of potential pathogenic bacteria.

A Feedback Loop between Dynamin and Actin Recruitment during Clathrin-Mediated Endocytosis

PubMed Central

Taylor, Marcus J.; Lampe, Marko; Merrifield, Christien J.

2012-01-01

Clathrin-mediated endocytosis proceeds by a sequential series of reactions catalyzed by discrete sets of protein machinery. The final reaction in clathrin-mediated endocytosis is membrane scission, which is mediated by the large guanosine triophosphate hydrolase (GTPase) dynamin and which may involve the actin-dependent recruitment of N-terminal containing BIN/Amphiphysin/RVS domain containing (N-BAR) proteins. Optical microscopy has revealed a detailed picture of when and where particular protein types are recruited in the ∼20–30 s preceding scission. Nevertheless, the regulatory mechanisms and functions that underpin protein recruitment are not well understood. Here we used an optical assay to investigate the coordination and interdependencies between the recruitment of dynamin, the actin cytoskeleton, and N-BAR proteins to individual clathrin-mediated endocytic scission events. These measurements revealed that a feedback loop exists between dynamin and actin at sites of membrane scission. The kinetics of dynamin, actin, and N-BAR protein recruitment were modulated by dynamin GTPase activity. Conversely, acute ablation of actin dynamics using latrunculin-B led to a ∼50% decrease in the incidence of scission, an ∼50% decrease in the amplitude of dynamin recruitment, and abolished actin and N-BAR recruitment to scission events. Collectively these data suggest that dynamin, actin, and N-BAR proteins work cooperatively to efficiently catalyze membrane scission. Dynamin controls its own recruitment to scission events by modulating the kinetics of actin and N-BAR recruitment to sites of scission. Conversely actin serves as a dynamic scaffold that concentrates dynamin and N-BAR proteins at sites of scission. PMID:22505844

Air-particle abrasion on zirconia ceramic using different protocols: effects on biaxial flexural strength after cyclic loading, phase transformation and surface topography.

PubMed

Souza, Rodrigo O A; Valandro, Luiz F; Melo, Renata M; Machado, João P B; Bottino, Marco A; Ozcan, Mutlu

2013-10-01

This study evaluated the effect of different air-particle abrasion protocols on the biaxial flexural strength and structural stability of zirconia ceramics. Zirconia ceramic specimens (ISO 6872) (Lava, 3M ESPE) were obtained (N=336). The specimens (N=118, n=20 per group) were randomly assigned to one of the air-abrasion protocols: Gr1: Control (as-sintered); Gr2: 50 µm Al2O3 (2.5 bar); Gr3: 50 µm Al2O3 (3.5 bar); Gr4: 110 µm Al2O3(2.5 bar); Gr5: 110 µm Al2O3 (3.5 bar); Gr6: 30 µm SiO2 (2.5 bar) (CoJet); Gr7: 30 µm SiO2(3.5 bar); Gr8: 110 µm SiO2 (2.5 bar) (Rocatec Plus); and Gr9: 110 µm SiO2 (3.5 bar) (duration: 20 s, distance: 10 mm). While half of the specimens were tested immediately, the other half was subjected to cyclic loading in water (100,000 cycles; 50 N, 4 Hz, 37 °°C) prior to biaxial flexural strength test (ISO 6872). Phase transformation (t→m), relative amount of transformed monoclinic zirconia (FM), transformed zone depth (TZD) and surface roughness were measured. Particle type (p=0.2746), pressure (p=0.5084) and cyclic loading (p=0.1610) did not influence the flexural strength. Except for the air-abraded group with 110 µm Al2O3 at 3.5 bar, all air-abrasion protocols increased the biaxial flexural strength (MPa) (Controlnon-aged: 1,030 ± 153, Controlaged: 1,138 ± 138; Experimentalnon-aged: 1,307 ± 184-1,554 ± 124; Experimentalaged: 1,308 ± 118-1,451 ± 135) in both non-aged and aged conditions, respectively. Surface roughness (Ra) was the highest with 110 µm Al2O3(0.84 µm. FM values ranged from 0% to 27.21%, higher value for the Rocatec Plus (110 µm SiO2) and 110 µm Al2O3 groups at 3.5 bar pressure. TZD ranged between 0 and 1.43 µm, with the highest values for Rocatec Plus and 110 µm Al2O3 groups at 3.5 bar pressure. Copyright © 2013 Elsevier Ltd. All rights reserved.

Testing the role of bedforms as controls on the morphodynamics of sandy braided rivers with CFD

NASA Astrophysics Data System (ADS)

Unsworth, C. A.; Nicholas, A. P.; Ashworth, P. J.; Best, J.; Lane, S. N.; Parsons, D. R.; Sambrook Smith, G.; Simpson, C.; Strick, R. J. P.

2017-12-01

Sand-bed rivers are characterised by multiple scales of topography (e.g., channels, bars and bedforms). Small scale topographic features (e.g., dunes) exert a significant influence on coherent flow structures and sediment transport processes, over distances that scale with channel depth. However, the extent to which such dune-scale effects control larger, channel and bar-scale morphology and morphodynamics remains unknown. Moreover, such bedform effects are typically neglected in two-dimensional (depth-averaged) morphodynamic models that are used to simulate river evolution. To evaluate the significance of these issues, we report results from a combined numerical modelling and field monitoring study, undertaken in the South Saskatchewan River, Canada. Numerical simulations were carried out, using the OpenFOAM CFD code, to quantify the mean three-dimensional flow structure within a 90 x 350 m section of channel. To isolate the role of bedforms as a control on flow and sediment transport, two simulations were undertaken. The first used a high-resolution ( 3 cm) bedform-resolving DEM. The second used a filtered DEM in which dunes were removed and only large scale topographic features (e.g., bars, scour pools etc) were resolved. The results of these simulations are compared here, in order to quantify the degree to which topographic steering by bedforms influences flow and sediment transport directions at bar and channel scales. Analysis of the CFD simulation results within a 2D morphodynamic modelling framework demonstrates that dunes exert a significant influence on sediment transport, and hence morphodynamics, and highlights important shortcomings in existing 2D model parameterisations of topographic steering.

Treatment plan comparison between helical tomotherapy and MLC-based IMRT using radiobiological measures

NASA Astrophysics Data System (ADS)

Mavroidis, Panayiotis; Costa Ferreira, Brigida; Shi, Chengyu; Lind, Bengt K.; Papanikolaou, Nikos

2007-07-01

The rapid implementation of advanced treatment planning and delivery technologies for radiation therapy has brought new challenges in evaluating the most effective treatment modality. Intensity-modulated radiotherapy (IMRT) using multi-leaf collimators (MLC) and helical tomotherapy (HT) are becoming popular modes of treatment delivery and their application and effectiveness continues to be investigated. Presently, there are several treatment planning systems (TPS) that can generate and optimize IMRT plans based on user-defined objective functions for the internal target volume (ITV) and organs at risk (OAR). However, the radiobiological parameters of the different tumours and normal tissues are typically not taken into account during dose prescription and optimization of a treatment plan or during plan evaluation. The suitability of a treatment plan is typically decided based on dosimetric criteria such as dose-volume histograms (DVH), maximum, minimum, mean and standard deviation of the dose distribution. For a more comprehensive treatment plan evaluation, the biologically effective uniform dose ({\\bar{\\bar{D}}}) is applied together with the complication-free tumour control probability (P+). Its utilization is demonstrated using three clinical cases that were planned with two different forms of IMRT. In this study, three different cancer types at different anatomical sites were investigated: head and neck, lung and prostate cancers. For each cancer type, a linac MLC-based step-and-shoot IMRT plan and a HT plan were developed. The MLC-based IMRT treatment plans were developed on the Philips treatment-planning platform, using the Pinnacle 7.6 software release. For the tomotherapy HiArt plans, the dedicated tomotherapy treatment planning station was used, running version 2.1.2. By using {\\bar{\\bar{D}}} as the common prescription point of the treatment plans and plotting the tissue response probabilities versus {\\bar{\\bar{D}}} for a range of prescription doses, a number of plan trials can be compared based on radiobiological measures. The applied plan evaluation method shows that in the head and neck cancer case the HT treatment gives better results than MLC-based IMRT in terms of expected clinical outcome (P+ of 62.2% and 46.0%, {\\bar{\\bar{D}}} to the ITV of 72.3 Gy and 70.7 Gy, respectively). In the lung cancer and prostate cancer cases, the MLC-based IMRT plans are better over the clinically useful dose prescription range. For the lung cancer case, the HT and MLC-based IMRT plans give a P+ of 66.9% and 72.9%, {\\bar{\\bar{D}}} to the ITV of 64.0 Gy and 66.9 Gy, respectively. Similarly, for the prostate cancer case, the two radiation modalities give a P+ of 68.7% and 72.2%, {\\bar{\\bar{D}}} to the ITV of 86.0 Gy and 85.9 Gy, respectively. If a higher risk of complications (higher than 5%) could be allowed, the complication-free tumour control could increase by over 40%, 2% and 30% compared to the initial dose prescription for the three cancer cases, respectively. Both MLC-based IMRT and HT can encompass the often-large ITV required while they minimize the volume of the organs at risk receiving high doses. Radiobiological evaluation of treatment plans may provide an improved correlation of the delivered treatment with the clinical outcome by taking into account the dose-response characteristics of the irradiated targets and normal tissues. There may exist clinical cases, which may look dosimetrically similar but in radiobiological terms may be quite different. In such situations, traditional dose-based evaluation tools can be complemented by the use of P_ +{-}{\\bar{\\bar{D}}} diagrams to effectively evaluate and compare treatment plans.

Supercritical Water Experimental Setup for µSR

NASA Astrophysics Data System (ADS)

Liu, Guangdong; Chen, Yanggang; Morrison, Alexander H.; Koda, Akihiro; Percival, Paul W.; Ghandi, Khashayar

The Canadian design for Generation IV nuclear reactors uses supercritical water (SCW, water above its critical point of 374 °C, 221 bar (1 bar = 100 kPa)) as the coolant. Supercritical water-cooled reactors (SCWRs) are designed towards sustainability, economic benefits, improved safety, and longer lifespan. Despite the potential advantages of SCWRs, we know very little about the kinetics of radiolysis products that are formed in them because of the limitations of experimental instruments under the extreme conditions of SCW. The radiolysis products can accumulate over time and create a very corrosive environment. Our group has developed and tested an apparatus suitable for muon spin rotation (µSR) studies of water and aqueous solutions up to 550 °C and 250 bar, close to the conditions at the reactor outlet of the proposed Canadian SCWR design (625 °C and 250 bar). The reaction kinetics information obtained from our setup, together with computer simulations, will aid us in developing chemical control strategies to minimize corrosion in SCWRs.

Thermal analysis of GFRP-reinforced continuous concrete decks subjected to top fire

NASA Astrophysics Data System (ADS)

Hawileh, Rami A.; Rasheed, Hayder A.

2017-12-01

This paper presents a numerical study that investigates the behavior of continuous concrete decks doubly reinforced with top and bottom glass fiber reinforced polymer (GFRP) bars subjected to top surface fire. A finite element (FE) model is developed and a detailed transient thermal analysis is performed on a continuous concrete bridge deck under the effect of various fire curves. A parametric study is performed to examine the top cover thickness and the critical fire exposure curve needed to fully degrade the top GFRP bars while achieving certain fire ratings for the deck considered. Accordingly, design tables are prepared for each fire curve to guide the engineer to properly size the top concrete cover and maintain the temperature in the GFRP bars below critical design values in order to control the full top GFRP degradation. It is notable to indicate that degradation of top GFRP bars do not pose a collapse hazard but rather a serviceability concern since cracks in the negative moment region widen resulting in simply supported spans.

Intensity modulation of a terahertz bandpass filter: utilizing image currents induced on MEMS reconfigurable metamaterials.

PubMed

Hu, Fangrong; Fan, Yixing; Zhang, Xiaowen; Jiang, Wenying; Chen, Yuanzhi; Li, Peng; Yin, Xianhua; Zhang, Wentao

2018-01-01

We experimentally demonstrated a tunable terahertz bandpass filter based on microelectromechanical systems (MEMS) reconfigurable metamaterials. The unit cell of the filter consists of two split-ring resonators (SRRs) and a movable bar. Initially, the movable bar situates at the center of the unit cell, and the filter has two passbands whose central frequencies locate at 0.65 and 0.96 THz. The intensity of the two passbands can be actively modulated by the movable bar, and a maximum modulation depth of 96% is achieved at 0.96 THz. The mechanism of tunability is investigated using the finite-integration time-domain method. The result shows that the image currents induced on the movable bar are opposite the resonance currents induced on the SRRs and, thus, weaken the oscillating intensity of the resonance currents. This scheme paves the way to dynamically control and switch the terahertz wave at some constant frequencies utilizing induced image currents.

Sensitive and Facile Electrochemiluminescent Immunoassay for Detecting Genetically Modified Rapeseed Based on Novel Carbon Nanoparticles.

PubMed

Gao, Hongfei; Wen, Luke; Wu, Yuhua; Yan, Xiaohong; Li, Jun; Li, Xiaofei; Fu, Zhifeng; Wu, Gang

2018-05-23

A highly sensitive electrochemiluminescent (ECL) immunoassay targeting PAT/ bar protein was facilely developed for genetically modified (GM) rapeseed detection using carbon nanoparticles (CNPs) originally prepared from printer toner. In this work, CNPs linked with antibody for PAT/ bar protein were used to modify a working electrode. After an immunoreaction between the PAT/ bar protein and its antibody, the immunocomplex formed on the electrode receptor region resulted in an inhibition of electron transfer between the electrode surface and the ECL substance, thus led to a decrease of ECL response. Under the optimal conditions, the ECL responses linearly decreased as the increase of the PAT/ bar protein concentration and the GM rapeseed RF3 content in the ranges of 0.10-10 ng/mL and 0.050-1.0%, with the limits of detection of 0.050 ng/mL and 0.020% (S/N = 3). These results open a facile, sensitive, and rapid approach for the safety control of agricultural GM rape.

Did liberalising bar hours decrease traffic accidents?

PubMed

Green, Colin P; Heywood, John S; Navarro, Maria

2014-05-01

Legal bar closing times in England and Wales have historically been early and uniform. Recent legislation liberalised closing times with the object of reducing social problems thought associated with drinking to "beat the clock." Indeed, using both difference in difference and synthetic control approaches we show that one consequence of this liberalisation was a decrease in traffic accidents. This decrease is heavily concentrated among younger drivers. Moreover, we provide evidence that the effect was most pronounced in the hours of the week directly affected by the liberalisation: late nights and early mornings on weekends. This evidence survives a series of robustness checks and suggests at least one socially positive consequence of extending bar hours. Copyright © 2014 Elsevier B.V. All rights reserved.

Efficacy of iron-supplement bars to reduce anemia in urban Indian women: a cluster-randomized controlled trial.

PubMed

Mehta, Rajvi; Platt, Alyssa C; Sun, Xizi; Desai, Mukesh; Clements, Dennis; Turner, Elizabeth L

2017-03-01

Background: India's high prevalence of iron-deficiency anemia has largely been attributed to the local diet consisting of nonheme iron, which has lower absorption than that of heme iron. Objective: We assessed the efficacy of the consumption of iron-supplement bars in raising hemoglobin concentrations and hematocrit percentages in anemic (hemoglobin concentration <12 g/dL) Indian women of reproductive age. Design: The Let's be Well Red study was a 90-d, pair-matched, cluster-randomized controlled trial. A total of 361 nonpregnant women (age 18-35 y) were recruited from 10 sites within Mumbai and Navi Mumbai, India. All participants received anemia education and a complete blood count (CBC). Random assignment of anemic participants to intervention and control arms occurred within 5 matched site-pairs. Intervention participants received 1 iron-supplement bar (containing 14 mg Fe)/d for 90 d, whereas control subjects received nothing. CBC tests were given at days 15, 45, and 90. Primary outcomes were 90-d changes from baseline in hemoglobin concentrations and hematocrit percentages. Linear mixed models and generalized estimating equations were used to model continuous and binary outcomes, respectively. Results: Of 179 anemic participants, 136 (76.0%) completed all follow-up assessments (65 intervention and 71 control participants). Baseline characteristics were comparable by arm. Mean hemoglobin and hematocrit increases after 90 d were greater for intervention than for control participants [1.4 g/dL (95% CI: 1.3, 1.6 g/dL) and 2.7% (95% CI: 2.2%, 3.2%), respectively]. The anemia prevalence at 90 d was lower for intervention (29.2%) than for control participants (98.6%) (OR: 0.007; 95% CI: 0.001, 0.04). Conclusions: The daily consumption of an iron-supplement bar leads to increased hemoglobin concentrations and hematocrit percentages and to a lower anemia prevalence in the target population with no reported side effects. This intervention is an attractive option to combat anemia in India. This trial was registered at clinicaltrials.gov as NCT02032615. © 2017 American Society for Nutrition.

A novel fiber composite ingredient incorporated into a beverage and bar blunts postprandial serum glucose and insulin responses: a randomized controlled trial.

PubMed

O'Connor, Lauren E; Campbell, Wayne W

2016-03-01

Previous research supports that consumption of resistant starch and guar gum independently influences insulin-mediated glucose responses to meals. This research assessed a novel co-processed fiber composite (FC) ingredient comprising whole-grain high-amylose maize flour and viscous guar gum on glucose and insulin responses to co-consumed and subsequent meals in humans. It was hypothesized that a smoothie-type beverage or a cold-pressed snack bar containing the FC would blunt and sustain serum glucose and insulin postprandial responses compared with maltodextrin (MD). The beverage and bar were assessed in 2 separate studies using identical protocols. Young, nondiabetic, nonobese adults participated in 2 testing days (randomized crossover design) separated by at least 1 week for both food forms. On each testing day, the FC or MD product was consumed with a low-fiber standardized breakfast followed by a low-fiber standardized lunch (with no FC or MD) 4 hours later. Blood samples were collected at baseline and incrementally throughout the 8-hour testing day. One-tailed paired t tests were performed to compare treatment areas under the curve, and a doubly repeated-measures analysis of variance was performed to compare treatment responses at individual time points (P< .05, Bonferroni corrected). The FC blunted the postprandial glucose and insulin responses compared with MD, including a robust glucose and insulin response reduction after breakfast and a continued modest glycemic second-meal reduction after lunch in both the beverage and the bar. These findings support the use of this novel whole-grain FC ingredient in a beverage or bar for insulin-mediated glucose control in young healthy adults. Copyright © 2016 Elsevier Inc. All rights reserved.

Modelling Bathymetric Control of Near Coastal Wave Climate: Report 3

DTIC Science & Technology

1992-02-01

complexity would occur if we were to make the full set of restrictions appropriate to the parabolic approximation of the KP equation ( Kadomtsev ... Kadomtsev , B.B. and Petviashvili , V.I., 1970, "On the stability of solitary waves in weakly dispersing media", Soy. Phys. Dokl., 15, 539-541. 24 Kirby...bar theory. Theory for Small Amplitude Bars The theory which provides the framework for analysis here is given by an extended mild-slope equation

Economic Impact of Smoke-Free Legislation: Did the Spanish Tobacco Control Law Affect the Economic Activity of Bars and Restaurants?

PubMed

García-Altés, Anna; Pinilla, Jaime; Marí-Dell'Olmo, Marc; Fernández, Esteve; López, Maria José

2015-11-01

The potential of smoke-free bans to negatively impact the hospitality business has been an argument of the hospitality and tobacco industry against such legislation. A partial smoke-free legislation was introduced in Spain in 2006 allowing smoking in most bars and restaurants due to the pressure of the hospitality sector. However, this partial ban was later amended in 2011 to include all the hospitality premises without exceptions. The stepped Spanish process permits to evaluate whether the entry into force of the smoke-free legislation had any effect on the economic activity of the hospitality sector. We employed a pooled time series cross-sectional design, with national data over 6 years (2006-2011). The dependent variable used was the total number of bars and restaurants per 100,000 inhabitants. The explanatory variables used were the average amount of spending per household in bars and restaurants, and the total unemployment rate in Spain by regions. For every 1% increase in the unemployment rate there was a 0.05% decrease in the number of bars and restaurants. In 2007, the number of bars and restaurants was significantly reduced by 13.06% (all others factors being held constant), 4.87% in 2008, and 10.42% in 2009. No statistically significant effect of the smoke-free legislation emerged from 2010 (6.76%) to 2011 (7.69%). The new Spanish smoke-free legislation had no effect on the number of bars and restaurants. © The Author 2015. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Influence of stress corrosion on the mechanical properties of laser-welded titanium.

PubMed

de Assis Ferreira, Nancy; Senna, Plinio Mendes; do Lago, Dalva Cristina Baptista; de Senna, Lilian Ferreira; Sampaio-Filho, Helio Rodrigues

2016-03-01

Whether laser-welded (LW) titanium can resist the stress corrosion produced by the combination of fluoride ions and stress in the oral environment is unknown. The purpose of this in vitro study was to investigate the influence of stress corrosion on the mechanical properties of LW titanium. Twenty-seven titanium bars (25×2 mm) with a circular cross-section were cut in half and laser-welded, while another 27 nonwelded (NW) bars were used as the control. Thirty bars were submitted to a flexural load of 480 N at 1 Hz and immersed in artificial saliva at pH 6 (S1) or in 1000 ppm fluoride-containing saliva at pH 6.0 (S2) or 2.0 (S3) at room temperature for up to 4000 cycles. After the stress corrosion simulation, the tensile strength and Vickers microhardness were determined (n=5). Twelve LW and NW bars were submitted to the corrosion immersion test media for 51 days (n=2) to determine polarization curves (n=2) in an artificial saliva media. The corroded surface was examined with scanning electron microscopy (SEM). The combination of fluoride and low pH significantly decreased the tensile strength of LW (P<.05). Stress corrosion did not affect the hardness of LW or NW (P>.05). NW bars immersed in S3 exhibited progressive surface dissolution, while LW bars spontaneously fractured at the welded area after 25 days of immersion in the same medium. SEM images demonstrated pitting corrosion without the presence of cracks in both groups immersed in S3. Stress corrosion caused by acidic fluoride-containing saliva and flexural load cycling decreased the tensile strength and hardness of LW titanium bars. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Interaction between maropitant and carprofen on sparing of the minimum alveolar concentration for blunting adrenergic response (MAC-BAR) of sevoflurane in dogs

PubMed Central

FUKUI, Sho; OOYAMA, Norihiko; TAMURA, Jun; UMAR, Mohammed Ahmed; ISHIZUKA, Tomohito; ITAMI, Takaharu; MIYOSHI, Kenjiro; SANO, Tadashi; YAMASHITA, Kazuto

2017-01-01

Maropitant, a neurokinin-1 receptor antagonist, may provide analgesic effects by blocking pharmacological action of substance P. Carprofen is a non-steroidal anti-inflammatory drug commonly used for pain control in dogs. The purpose of this study was to evaluate the effect of a combination of maropitant and carprofen on the minimum alveolar concentration for blunting adrenergic response (MAC-BAR) of sevoflurane in dogs. Six healthy adult beagle dogs were anesthetized with sevoflurane four times with a minimum of 7-day washout period. On each occasion, maropitant (1 mg/kg) alone, carprofen (4 mg/kg) alone, a combination of maropitant (1 mg/kg) and carprofen (4 mg/kg), or saline (0.1 ml/kg) was subcutaneously administered at 1 hr prior to the first electrical stimulation for the sevoflurane MAC-BAR determination. The sevoflurane MAC-BAR was significantly reduced by maropitant alone (2.88 ± 0.73%, P=0.010), carprofen alone (2.96 ± 0.38%, P=0.016) and the combination (2.81 ± 0.51%, P=0.0003), compared with saline (3.37 ± 0.56%). There was no significant difference in the percentage of MAC-BAR reductions between maropitant alone, carprofen alone and the combination. The administration of maropitant alone and carprofen alone produced clinically significant sparing effects on the sevoflurane MAC-BAR in dogs. However, the combination of maropitant and carprofen did not produce any additive effect on the sevoflurane MAC-BAR reduction. Anesthetic premedication with a combination of maropitant and carprofen may not provide any further sparing effect on anesthetic requirement in dogs. PMID:28111373

Interaction between maropitant and carprofen on sparing of the minimum alveolar concentration for blunting adrenergic response (MAC-BAR) of sevoflurane in dogs.

PubMed

Fukui, Sho; Ooyama, Norihiko; Tamura, Jun; Umar, Mohammed Ahmed; Ishizuka, Tomohito; Itami, Takaharu; Miyoshi, Kenjiro; Sano, Tadashi; Yamashita, Kazuto

2017-03-18

Maropitant, a neurokinin-1 receptor antagonist, may provide analgesic effects by blocking pharmacological action of substance P. Carprofen is a non-steroidal anti-inflammatory drug commonly used for pain control in dogs. The purpose of this study was to evaluate the effect of a combination of maropitant and carprofen on the minimum alveolar concentration for blunting adrenergic response (MAC-BAR) of sevoflurane in dogs. Six healthy adult beagle dogs were anesthetized with sevoflurane four times with a minimum of 7-day washout period. On each occasion, maropitant (1 mg/kg) alone, carprofen (4 mg/kg) alone, a combination of maropitant (1 mg/kg) and carprofen (4 mg/kg), or saline (0.1 ml/kg) was subcutaneously administered at 1 hr prior to the first electrical stimulation for the sevoflurane MAC-BAR determination. The sevoflurane MAC-BAR was significantly reduced by maropitant alone (2.88 ± 0.73%, P=0.010), carprofen alone (2.96 ± 0.38%, P=0.016) and the combination (2.81 ± 0.51%, P=0.0003), compared with saline (3.37 ± 0.56%). There was no significant difference in the percentage of MAC-BAR reductions between maropitant alone, carprofen alone and the combination. The administration of maropitant alone and carprofen alone produced clinically significant sparing effects on the sevoflurane MAC-BAR in dogs. However, the combination of maropitant and carprofen did not produce any additive effect on the sevoflurane MAC-BAR reduction. Anesthetic premedication with a combination of maropitant and carprofen may not provide any further sparing effect on anesthetic requirement in dogs.

Coevolution of bed surface patchiness and channel morphology: 1. Mechanisms of forced patch formation

USGS Publications Warehouse

Nelson, Peter A.; McDonald, Richard R.; Nelson, Jonathan M.; Dietrich, William E.

2015-01-01

Riverbeds frequently display a spatial structure where the sediment mixture composing the channel bed has been sorted into discrete patches of similar grain size. Even though patches are a fundamental feature in gravel bed rivers, we have little understanding of how patches form, evolve, and interact. Here we present a two-dimensional morphodynamic model that is used to examine in greater detail the mechanisms responsible for the development of forced bed surface patches and the coevolution of bed morphology and bed surface patchiness. The model computes the depth-averaged channel hydrodynamics, mixed-grain-size sediment transport, and bed evolution by coupling the river morphodynamic model Flow and Sediment Transport with Morphological Evolution of Channels (FaSTMECH) with a transport relation for gravel mixtures and the mixed-grain-size Exner equation using the active layer assumption. To test the model, we use it to simulate a flume experiment in which the bed developed a sequence of alternate bars and temporally and spatially persistent forced patches with a general pattern of coarse bar tops and fine pools. Cross-stream sediment flux causes sediment to be exported off of bars and imported into pools at a rate that balances downstream gradients in the streamwise sediment transport rate, allowing quasi-steady bar-pool topography to persist. The relative importance of lateral gravitational forces on the cross-stream component of sediment transport is a primary control on the amplitude of the bars. Because boundary shear stress declines as flow shoals over the bars, the lateral sediment transport is increasingly size selective and leads to the development of coarse bar tops and fine pools.

Analisys of pectoralis major tendon in weightlifting athletes using ultrasonography and elastography.

PubMed

Pochini, Alberto de Castro; Ferretti, Mario; Kawakami, Eduardo Felipe Kin Ito; Fernandes, Artur da Rocha Corrêa; Yamada, Andre Fukunishi; Oliveira, Gabriela Clemente de; Cohen, Moisés; Andreoli, Carlos Vicente; Ejnisman, Benno

2015-01-01

To evaluate tendinopathy of the pectoralis major muscle in weightlifting athletes using ultrasound and elastography. This study included 20 patients, 10 with rupture of the pectoralis major muscle and 10 control patients. We evaluated pectoralis major muscle contralateral tendon with ultrasonographic and elastography examinations. The ultrasonographic examinations were performed using a high-resolution B mode ultrasound device. The elastography evaluation was classified into three patterns: (A), if stiff (more than 50% area with blue staining); (B), if intermediate (more than 50% green); and (C), if softened (more than 50% red). Patients' mean age was 33±5.3 years. The presence of tendinous injury measured by ultrasound had a significant different (p=0.0055), because 80% of cases had tendinous injury versus 10% in the Control Group. No significant differences were seen between groups related with change in elastography (p=0.1409). Long-term bodybuilders had ultrasound image with more tendinous injury than those in Control Group. There was no statistical significance regarding change in tendon elasticity compared with Control Group.

How curvature-generating proteins build scaffolds on membrane nanotubes

PubMed Central

Evergren, Emma; Golushko, Ivan; Prévost, Coline; Renard, Henri-François; Johannes, Ludger; McMahon, Harvey T.; Lorman, Vladimir; Voth, Gregory A.; Bassereau, Patricia

2016-01-01

Bin/Amphiphysin/Rvs (BAR) domain proteins control the curvature of lipid membranes in endocytosis, trafficking, cell motility, the formation of complex subcellular structures, and many other cellular phenomena. They form 3D assemblies that act as molecular scaffolds to reshape the membrane and alter its mechanical properties. It is unknown, however, how a protein scaffold forms and how BAR domains interact in these assemblies at protein densities relevant for a cell. In this work, we use various experimental, theoretical, and simulation approaches to explore how BAR proteins organize to form a scaffold on a membrane nanotube. By combining quantitative microscopy with analytical modeling, we demonstrate that a highly curving BAR protein endophilin nucleates its scaffolds at the ends of a membrane tube, contrary to a weaker curving protein centaurin, which binds evenly along the tube’s length. Our work implies that the nature of local protein–membrane interactions can affect the specific localization of proteins on membrane-remodeling sites. Furthermore, we show that amphipathic helices are dispensable in forming protein scaffolds. Finally, we explore a possible molecular structure of a BAR-domain scaffold using coarse-grained molecular dynamics simulations. Together with fluorescence microscopy, the simulations show that proteins need only to cover 30–40% of a tube’s surface to form a rigid assembly. Our work provides mechanical and structural insights into the way BAR proteins may sculpt the membrane as a high-order cooperative assembly in important biological processes. PMID:27655892

Salad Bars Increased Selection and Decreased Consumption of Fruits and Vegetables 1 Month After Installation in Title I Elementary Schools: A Plate Waste Study.

PubMed

Bean, Melanie K; Brady Spalding, Bethany; Theriault, Elizabeth; Dransfield, Kayla-Brooke; Sova, Alexandra; Dunne Stewart, Mary

2018-06-01

To evaluate the 1-month impact of salad bars on fruit and vegetable (FV) selection, intake, and waste. Pre-post quasi-experimental design. Title I elementary schools in a large, urban district in central Virginia. Students (grades 1-5; >95% African American) from 2 elementary schools participated in plate waste assessments (282 plates were rated at baseline, 443 at post-assessment); fourth- and fifth-grade students from 15 (of 18 eligible) schools (n = 1,193) responded to surveys. Digital imagery plate waste assessments were conducted before salad bars were installed (baseline) and 1 month afterward (post). Post-surveys examined student perceptions of salad bars. Fruit and vegetable selection, consumption, and waste. General linear models (without considering clustering) examined changes in outcomes, controlling for school. Frequencies and qualitative analyses were applied to survey data. At post, students selected more types of FVs (1.81-2.58; P < .001), although FV consumption decreased by 0.65 cups (P < .001). Given the smaller portions selected, there was less FV waste (0.27 cups; P < .001) at post. Students liked the ability to choose FV from salad bars. Short-term exposure to salad bars increased the number of FV students chose but decreased FV consumption. Additional strategies are needed to increase FV consumption. Copyright © 2018 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

An Assessment of Health Risks and Mortality from Exposure to Secondhand Smoke in Chinese Restaurants and Bars

PubMed Central

Liu, Ruiling; Jiang, Yuan; Li, Qiang; Hammond, S. Katharine

2014-01-01

Introduction Smoking is generally not regulated in restaurants or bars in China, or the restrictions are not fully implemented if there are any, while the related hazard health effects are not recognized by the majority of the Chinese population. Objectives This study aims to assess the excess health risks and mortality attributed to secondhand smoke (SHS) exposure in restaurants and bars for both servers and patrons to provide necessary evidence for advancing tobacco control in this microenvironment. Methods Two approaches were used for the assessment. One is a continuous approach based on existing field measurements and Repace and Lowrey’s dose-response model, and the other is a categorical approach based on exposure or not and epidemiological studies. Results Based on the continuous approach, servers were estimated to have a lifetime excess risk (LER) of lung cancer death (LCD) of 730 to 1,831×10−6 for working five days a week for 45 years in smoking restaurants and 1,862 to 8,136×10−6 in smoking bars, and patrons could have a LER of LCD of 47 to 117×10−6 due to visiting smoking restaurants for an average of 13 minutes a day for 60 years, and 119 to 522×10−6 due to visiting smoking bars. The categorical approach estimated that SHS exposure in restaurants and bars alone caused 84 LCD and 57 ischemic heart disease (IHD) deaths among nonsmoking servers and 1,2419 LCDs and 1,689 IHD deaths among the nonsmoking patron population. Conclusions SHS exposure in restaurants and bars alone can impose high lifetime excess risks of lung cancer death and ischemic heart disease deaths to both servers and patrons, and can cause a significant number of deaths each year in China. These health risks and deaths can be prevented by banning smoking in restaurants and bars and effectively implementing these smoking bans. PMID:24416289

Complete Mitochondrial Genomes of New Zealand’s First Dogs

PubMed Central

Greig, Karen; Boocock, James; Prost, Stefan; Horsburgh, K. Ann; Jacomb, Chris; Walter, Richard; Matisoo-Smith, Elizabeth

2015-01-01

Dogs accompanied people in their migrations across the Pacific Ocean and ultimately reached New Zealand, which is the southern-most point of their oceanic distribution, around the beginning of the fourteenth century AD. Previous ancient DNA analyses of mitochondrial control region sequences indicated the New Zealand dog population included two lineages. We sequenced complete mitochondrial genomes of fourteen dogs from the colonisation era archaeological site of Wairau Bar and found five closely-related haplotypes. The limited number of mitochondrial lineages present at Wairau Bar suggests that the founding population may have comprised only a few dogs; or that the arriving dogs were closely related. For populations such as that at Wairau Bar, which stemmed from relatively recent migration events, control region sequences have insufficient power to address questions about population structure and founding events. Sequencing mitogenomes provided the opportunity to observe sufficient diversity to discriminate between individuals that would otherwise be assigned the same haplotype and to clarify their relationships with each other. Our results also support the proposition that at least one dispersal of dogs into the Pacific was via a south-western route through Indonesia. PMID:26444283

Collective intelligence for control of distributed dynamical systems

NASA Astrophysics Data System (ADS)

Wolpert, D. H.; Wheeler, K. R.; Tumer, K.

2000-03-01

We consider the El Farol bar problem, also known as the minority game (W. B. Arthur, The American Economic Review, 84 (1994) 406; D. Challet and Y. C. Zhang, Physica A, 256 (1998) 514). We view it as an instance of the general problem of how to configure the nodal elements of a distributed dynamical system so that they do not "work at cross purposes", in that their collective dynamics avoids frustration and thereby achieves a provided global goal. We summarize a mathematical theory for such configuration applicable when (as in the bar problem) the global goal can be expressed as minimizing a global energy function and the nodes can be expressed as minimizers of local free energy functions. We show that a system designed with that theory performs nearly optimally for the bar problem.

Experiments examining the shapes of isolated bars in comparison with those occurring in braided rivers

NASA Technical Reports Server (NTRS)

Komar, P. D.

1984-01-01

Sand bars and islands within braided rivers have characteristic rhomboid or diamond shapes, often becoming very complex in form as the density of islands increases. Similar forms are observed in the martian outflow channels where the islands occur in groups. This contrasts with the more isolated martian islands which have airfoil shapes, as do isolated streamlined islands in rivers and in the Channeled Scabland. These observations indicate that the bar and island forms are controlled by the density of the islands, with increasing island interaction and flow modification as the density increases. As a continuation of previous flume experiments on the shapes of isolated islands, a new series of experiments investigate the modifications produced by a progressive increase in island density, finally leading to a true braided system.

Development of a Mobile Robot with Wavy Movement by Rotating Bars

NASA Astrophysics Data System (ADS)

Kitagawa, Ato; Zhang, Liang; Eguchi, Takashi; Tsukagoshi, Hideyuki

A mobile robot with a new type of movement called wavy movement is proposed in this paper. Wavy movement can be readily realized by many bars or crosses which are rotating at equivalent speeds, and the robot with simple structure and easy control method is able to ascend and descend stairs by covering the corners of stairs within separate wave shapes between touching points. The principle of wavy movement, the mechanism, and the experimental result of the proposed robot are discussed.

Human Factors Guidelines for Command and Control Systems: Battlefield and Decision Graphics Guidelines

DTIC Science & Technology

1989-03-01

detail in a small area, use achromatic colors ( black , white, and grey) and use chromatic colors for larger panels or for attracting attention. b. Blues...purposes (e.g., to draw the users attention to a total, a broken bar or other important data element). b. Black and white should be used with caution. They...enough to set the bars or columns off from the background and define figure and ground relationships. (2) Use black in small areas and for certain

Prospects of discovering stable double-heavy tetraquarks at a Tera-Z factory

NASA Astrophysics Data System (ADS)

Ali, Ahmed; Parkhomenko, Alexander Ya.; Qin, Qin; Wang, Wei

2018-07-01

Motivated by a number of theoretical considerations, predicting the deeply bound double-heavy tetraquarks T[ u bar d bar ]{ bb }, T[ u bar s bar ]{ bb } and T[ d bar s bar ]{ bb }, we explore the potential of their discovery at Tera-Z factories. Using the process Z → b b bar b b bar , we calculate, employing the Monte Carlo generators MadGraph5_aMC@NLO and Pythia6, the phase space configuration in which the bb pair is likely to fragment as a diquark. In a jet-cone, defined by an invariant mass interval mbb < M T[ q bar qbar‧ ]{ bb } + ΔM, the sought-after tetraquarks T[ q bar qbar‧ ]{ bb } as well as the double-bottom baryons, Ξbb0,-, and Ωbb- , can be produced. Using the heavy quark-diquark symmetry, we estimate B (Z → T[ u bar d bar ]{ bb } + b bar b bar) = (1.2-0.3+1.0) ×10-6, and about a half of this for the T[ u bar s bar ]{ bb } and T[ d bar s bar ]{ bb } . We also present an estimate of their lifetimes using the heavy quark expansion, yielding τ (T[ q bar qbar‧ ]{ bb }) ≃ 800 fs. Measuring the tetraquark masses would require decays, such as T[ u bar d bar ]{ bb } - →B-D-π+, T [ u bar d bar ]{ bb } - → J / ψK‾0B-, T[ u bar d bar ]{ bb } - → J / ψK-B‾0, T[ u bar s bar ]{ bb } - → Ξbc0 Σ-, and T[ d bar s bar ]{ bb } 0 → Ξbc0 Σbar0, with subsequent decay chains in exclusive non-leptonic final states. We estimate a couple of the decay widths and find that the product branching ratios do not exceed 10-5. Hence, a good fraction of these modes will be required for a discovery of T[ q bar qbar‧ ]{ bb } at a Tera-Z factory.

Modeling and measuring the relationships between sediment transport processes, alluvial bedforms and channel-scale morphodynamics in sandy braided rivers.

NASA Astrophysics Data System (ADS)

Nicholas, A. P.; Ashworth, P. J.; Best, J.; Lane, S. N.; Parsons, D. R.; Sambrook Smith, G.; Simpson, C.; Strick, R. J. P.; Unsworth, C. A.

2017-12-01

Recent years have seen significant advances in the development and application of morphodynamic models to simulate river evolution. Despite this progress, significant challenges remain to be overcome before such models can provide realistic simulations of river response to environmental change, or be used to determine the controls on alluvial channel patterns and deposits with confidence. This impasse reflects a wide range of factors, not least the fact that many of the processes that control river behaviour operate at spatial scales that cannot be resolved by such models. For example, sand-bed rivers are characterised by multiple scales of topography (e.g., dunes, bars, channels), the finest of which must often by parameterized, rather than represented explicitly in morphodynamic models. We examine these issues using a combination of numerical modeling and field observations. High-resolution aerial imagery and Digital Elevation Models obtained for the sandy braided South Saskatchewan River in Canada are used to quantify dune, bar and channel morphology and their response to changing flow discharge. Numerical simulations are carried out using an existing morphodynamic model based on the 2D shallow water equations, coupled with new parameterisations of the evolution and influence of alluvial bedforms. We quantify the spatial patterns of sediment flux using repeat images of dune migration and bar evolution. These data are used to evaluate model predictions of sediment transport and morphological change, and to assess the degree to which model performance is controlled by the parametrization of roughness and sediment transport phenomena linked to subgrid-scale bedforms (dunes). The capacity of such models to replicate the characteristic multi-scale morphology of bars in sand-bed rivers, and the contrasting morphodynamic signatures of braiding during low and high flow conditions, is also assessed.

Interfacial toughness of bilayer dental ceramics based on a short-bar, chevron-notch test

PubMed Central

Anunmana, Chuchai; Anusavice, Kenneth J.; Mecholsky, John J.

2009-01-01

Objective The objective of this study was to test the null hypothesis that the interfacial toughness of each of two types of bonded core-veneer bilayer ceramics is not significantly different from the apparent fracture toughness of the control monolithic glass veneer. Methods T-shaped short bars of a lithia-disilicate glass-ceramic core (LC) and yttria-stabilized polycrystalline zirconia core ceramic (ZC) were prepared according to the manufacturer's recommendations. V-shaped notches were prepared by using 25-μm-thick palladium foil, leaving the chevron notch area exposed, and the bars were veneered with a thermally compatible glass veneer (LC/GV and ZC/GV). Additionally, we also bonded the glass veneer to itself as a control group (GV/GV). Specimens were kept in distilled water for 30 days before testing in tension. Eight glass veneer bars were prepared for the analysis of fracture toughness test using the indentation-strength technique. Results The mean interfacial toughness of the LC/GV group was 0.69 [0.11] MPa·m1/2, and did not significantly differ from that of the GV/GV control group, 0.74 (0.17) MPa·m1/2 (p > 0.05). However, the difference between the mean interfacial toughness of the ZC/GV group, 0.13 (0.07) MPa·m1/2, and the LC/GV and the GV/GV groups was statistically significant (p<0.05). Significance For bilayer all-ceramic restorations with high-strength core materials, the veneering ceramics are the weakest link in the design of the structure. Since all-ceramic restorations often fail from chipping of veneer layers or crack initiation at the interface, the protective effects of thermal mismatch stresses oral prosthesis design should be investigated. PMID:19818486

Loss-of-Control Eating Following Sleeve Gastrectomy Surgery

PubMed Central

Ivezaj, Valentina; Kessler, Erin E.; Lydecker, Janet A.; Barnes, Rachel D.; White, Marney A.; Grilo, Carlos M.

2016-01-01

Background Post-operative loss-of-control (LOC) eating is related to poorer weight loss outcomes following bariatric surgery, but little is known about LOC eating following sleeve gastrectomy surgery. Objectives To examine LOC eating severity and weight loss following sleeve gastrectomy. Setting University School of Medicine, U.S. Methods Participants were 71 individuals (84.5% female; n=60) who underwent sleeve gastrectomy surgery within the previous 4–9 months and reported LOC eating at least once weekly during the previous 28 days. LOC eating was assessed using the Eating Disorder Examination (EDE) Bariatric Surgery Version. Current mean age and body mass index were 47.3 (SD=10.1) years and 37.9 (SD=8.2) kg/m2. Two groups, bariatric binge-eating disorder (Bar-BED) and loss-of-control eating only (LOC-Only) were created based on modified binge-eating disorder (BED) criteria, which excluded the “unusually large quantity of food” criterion due to limited gastric capacity post-surgery. Bar-BED criteria mirrored BED criteria and consisted of the following: at least 12 LOC eating episodes over the prior three months (once weekly), 3 of 5 associated symptoms, marked distress over LOC eating, and lack of regular compensatory behaviors. Results Based on these revised criteria, 49.3% (n=35) were classified as the Bar-BED group and 50.7% (n=36) as the LOC-Only group. Compared to the LOC-Only group, the Bar-BED group had significantly greater EDE global and subscale scores and lower percent weight loss by six months post-surgery. Conclusions Findings suggest LOC eating that parallels BED post-surgery is associated with poorer outcomes following sleeve gastrectomy including poorer weight loss and greater severity of eating-disorder psychopathology. PMID:27913121

Dynamics of Braided Channels, Bars, and Associated Deposits Under Experimental Density Currents

NASA Astrophysics Data System (ADS)

Limaye, A. B. S.; Jean-Louis, G.; Paola, C.

2015-12-01

Turbidity currents are the principal agents that transfer clastic sediment from continental margins to the deep ocean. The extensive sedimentary deposits that result can record influences from fluvial transport, ocean currents, and seafloor bathymetry; decoding these controls is key to understanding long-term continental denudation and the formation of hydrocarbon reservoirs. Experimental turbidity currents often use pre-formed, single-thread channels, but more recent experiments and seafloor observations suggest that braided channels also develop in submarine environments. Yet controls on the formation of submarine braided channels and relationships between these channels and stratigraphic evolution remain largely untested. We have conducted a series of experiments to determine the conditions conducive to forming braided submarine channels, and to relate channel geometry and kinematics to deposit architecture. Dissolved salt supplies the excess density of the experimental turbidity currents, which transport plastic, sand-sized sediment as bedload across a test section two meters long and one meter wide. Our experiments indicate that braided channels can form as constructional features without prior erosion for a range of input water and sediment fluxes. Channel migration, avulsion, and aggradation construct sedimentary deposits with bars at a variety of scales. Bar geometry and channel kinematics are qualitatively similar under subaerial and subaqueous experiments with other parameters fixed. We will present quantitative analyses of the relationships between channel geometry and mobility and deposit architecture, at scales from individual bars to the entire deposit, and compare these results to control experiments with subaerial braiding. These experimental results suggest parallels between subaerial and subaqueous braiding, and help to constrain forward models for stratigraphic evolution and inverse methods for estimating flow conditions from turbidites.

FIRST FLOOR, A view looking north at the controls for ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

FIRST FLOOR, A view looking north at the controls for the Stokes Press along the wall outside Room 136. These controls include a thermometer, timer and pressure switches, and a buss bar used for static electricity control - Department of Energy, Mound Facility, Isolated Building (I Building), One Mound Road, Miamisburg, Montgomery County, OH

Action planning and position sense in children with Developmental Coordination Disorder.

PubMed

Adams, Imke L J; Ferguson, Gillian D; Lust, Jessica M; Steenbergen, Bert; Smits-Engelsman, Bouwien C M

2016-04-01

The present study examined action planning and position sense in children with Developmental Coordination Disorder (DCD). Participants performed two action planning tasks, the sword task and the bar grasping task, and an active elbow matching task to examine position sense. Thirty children were included in the DCD group (aged 6-10years) and age-matched to 90 controls. The DCD group had a MABC-2 total score ⩽5th percentile, the control group a total score ⩾25th percentile. Results from the sword-task showed that children with DCD planned less for end-state comfort. On the bar grasping task no significant differences in planning for end-state comfort between the DCD and control group were found. There was also no significant difference in the position sense error between the groups. The present study shows that children with DCD plan less for end-state comfort, but that this result is task-dependent and becomes apparent when more precision is needed at the end of the task. In that respect, the sword-task appeared to be a more sensitive task to assess action planning abilities, than the bar grasping task. The action planning deficit in children with DCD cannot be explained by an impaired position sense during active movements. Copyright © 2016 Elsevier B.V. All rights reserved.

A multi-segment soft actuator for biomedical applications based on IPMCs

NASA Astrophysics Data System (ADS)

Zhao, Dongxu; Wang, Yanjie; Liu, Jiayu; Luo, Meng; Li, Dichen; Chen, Hualing

2015-04-01

With rapid progress of biomedical devices towards miniaturization, flexibility, multifunction and low cost, the restrictions of traditional mechanical structures become particularly apparent, while soft materials become research focus in broad fields. As one of the most attractive soft materials, Ionic Polymer-Metal Composite (IPMC) is widely used as artificial muscles and actuators, with the advantages of low driving-voltage, high efficiency of electromechanical transduction and functional stabilization. In this paper, a new intuitive control method was presented to achieve the omnidirectional bending movements and was applied on a representative actuation structure of a multi-degree-offreedom soft actuator composed of two segments bar-shaped IPMC with a square cross section. Firstly, the bar-shaped IPMCs were fabricated by the solution casting method, reducing plating, autocatalytic plating method and cut into shapes successively. The connectors of the multi-segment IPMC actuator were fabricated by 3D printing. Then, a new control method was introduced to realize the intuitive mapping relationship between the actuator and the joystick manipulator. The control circuit was designed and tested. Finally, the multi-degree-of-freedom actuator of 2 segments bar-shaped IPMCs was implemented and omnidirectional bending movements were achieved, which could be a promising actuator for biomedical applications, such as endoscope, catheterism, laparoscopy and the surgical resection of tumors.

Evaluation of a responsible beverage service and enforcement program: Effects on bar patron intoxication and potential impaired driving by young adults.

PubMed

Fell, James C; Fisher, Deborah A; Yao, Jie; McKnight, A Scott

2017-08-18

Studies of alcohol-related harm (violence, injury, illness) suggest that the most significant risk factors are the amount of alcohol consumed and whether obviously intoxicated patrons continue to be served. This study's objective was to investigate the effects of a responsible beverage service (RBS)/enhanced alcohol enforcement intervention on bars, bar patrons, and impaired driving. Two communities-Monroe County, New York, and Cleveland, Ohio-participated in a demonstration program and evaluation. The intervention applied RBS training, targeted enforcement, and corrective actions by law enforcement to a random sample of 10 identified problem bars in each community compared to 10 matched nonintervention problem bars. Data were collected over 3 waves on bar serving practices, bar patron intoxication, drinking and driving, and other alcohol-related harm from intervention and control bars and treatment and comparison communities. In Monroe County, New York, of the 14 outcome measures analyzed, 7 measures showed statistically significant differences from pre- to postintervention. Six of those measures indicated changes in the desired or positive direction and 2 measures were in the undesired or negative direction. Of note in the positive direction, the percentage of intervention bar patrons who were intoxicated decreased from 44 to 27% and the average blood alcohol concentration of patrons decreased from 0.097 to 0.059 g/dL pre- to postintervention. In Cleveland, Ohio, 6 of the 14 measures showed statistically significant changes pre- to postintervention with 6 in the positive direction and 4 in the negative direction. Of note, the percentage of pseudo-intoxicated patrons denied service in intervention bars increased from 6 to 29%. Of the 14 outcome measures that were analyzed in each community, most indicated positive changes associated with the intervention, but others showed negative associations. About half of the measures showed no significance, the sample sizes were too small, or the data were unavailable. Therefore, at best, the results of these demonstration programs were mixed. There were, however, some positive indications from the intervention. It appears that when bar managers and owners are aware of the program and its enforcement and when servers are properly trained in RBS, fewer patrons may become intoxicated and greater efforts may be made to deny service to obviously intoxicated patrons. Given that about half of arrested impaired drivers had their last drink at a licensed establishment, widespread implementation of this strategy has the potential to help reduce impaired driving.

El aprendizaje significativo en las ciencias al participar en proyectos de investigacion cientifica

NASA Astrophysics Data System (ADS)

Mora Polanco, Miguelena

La ciencia es el eje fundamental a traves del cual se desarrollan las habilidades necesarias para el pensar cientifico que va a la busqueda del conocimiento cientifico. La intencion de este estudio fue indagar en el tema de investigacion cientifica desde el punto de vista de los participantes en los siguientes aspectos relacionados con la experiencia de investigacion cientifica: a) conceptos, b) proceso, c) destrezas y d) disposicion. Tambien se analizaron: a) las perspectivas del metodo cientifico, b) la estrategia de ensenanza, c) la cultura cientifica y d) la exposicion del proyecto investigativo en la Feria Cientifica; como parte del aprendizaje significativo de la ciencias de los participantes. Esta investigacion cualitativa propuso como diseno el estudio de caso. Los aspectos relacionados a la experiencia de participar en proyecto de investigacion cientifica son el fenomeno o caso bajo estudio. En el estudio participaron cinco (5) estudiantes egresados de escuela publica o privada que cursaban hasta el tercer ano de estudios universitarios, conducentes a un bachillerato en educacion secundaria en ciencias o en ciencias naturales. Las tecnicas utilizadas para recopilar los datos fueron: analisis de documentos del DEPR, revision de artefactos y entrevistas profundas. Para el analisis de los datos de las entrevistas se utilizo el modelo de Wolcott (1994). Del analisis de documentos del DEPR se identificaron areas a mejorar en las guias de las cartas circulares con relacion a la investigacion escolar y la feria cientifica. El analisis de los artefactos proveyo evidencia de como los internados, simposios e investigaciones fomentan el que los estudiantes se superen en el aspecto cognitivo, se conviertan en creadores del conocimiento, al hacer suyo los conceptos para poder explicarlos al publico. De las entrevistas los participantes manifestaron que la experiencia de investigacion fue una de aprendizaje significativo que los marco para toda la vida y les expandio su curiosidad de modo que lo aplican en su vida. La experiencia los ayudo en el entendimiento y la aplicacion de conceptos, procesos y destrezas relacionados con la ciencia. Finalmente, los participantes proveyeron las estrategias didacticas que desde su perspectiva facilitan la ensenanza-aprendizaje de la ciencia.

Dip TIPS as a Facile and Versatile Method for Fabrication of Polymer Foams with Controlled Shape, Size and Pore Architecture for Bioengineering Applications

PubMed Central

Kasoju, Naresh; Kubies, Dana; Kumorek, Marta M.; Kříž, Jan; Fábryová, Eva; Machová, Lud'ka; Kovářová, Jana; Rypáček, František

2014-01-01

The porous polymer foams act as a template for neotissuegenesis in tissue engineering, and, as a reservoir for cell transplants such as pancreatic islets while simultaneously providing a functional interface with the host body. The fabrication of foams with the controlled shape, size and pore structure is of prime importance in various bioengineering applications. To this end, here we demonstrate a thermally induced phase separation (TIPS) based facile process for the fabrication of polymer foams with a controlled architecture. The setup comprises of a metallic template bar (T), a metallic conducting block (C) and a non-metallic reservoir tube (R), connected in sequence T-C-R. The process hereinafter termed as Dip TIPS, involves the dipping of the T-bar into a polymer solution, followed by filling of the R-tube with a freezing mixture to induce the phase separation of a polymer solution in the immediate vicinity of T-bar; Subsequent free-drying or freeze-extraction steps produced the polymer foams. An easy exchange of the T-bar of a spherical or rectangular shape allowed the fabrication of tubular, open- capsular and flat-sheet shaped foams. A mere change in the quenching time produced the foams with a thickness ranging from hundreds of microns to several millimeters. And, the pore size was conveniently controlled by varying either the polymer concentration or the quenching temperature. Subsequent in vivo studies in brown Norway rats for 4-weeks demonstrated the guided cell infiltration and homogenous cell distribution through the polymer matrix, without any fibrous capsule and necrotic core. In conclusion, the results show the “Dip TIPS” as a facile and adaptable process for the fabrication of anisotropic channeled porous polymer foams of various shapes and sizes for potential applications in tissue engineering, cell transplantation and other related fields. PMID:25275373

Multi Objective Controller Design for Linear System via Optimal Interpolation

NASA Technical Reports Server (NTRS)

Ozbay, Hitay

1996-01-01

We propose a methodology for the design of a controller which satisfies a set of closed-loop objectives simultaneously. The set of objectives consists of: (1) pole placement, (2) decoupled command tracking of step inputs at steady-state, and (3) minimization of step response transients with respect to envelope specifications. We first obtain a characterization of all controllers placing the closed-loop poles in a prescribed region of the complex plane. In this characterization, the free parameter matrix Q(s) is to be determined to attain objectives (2) and (3). Objective (2) is expressed as determining a Pareto optimal solution to a vector valued optimization problem. The solution of this problem is obtained by transforming it to a scalar convex optimization problem. This solution determines Q(O) and the remaining freedom in choosing Q(s) is used to satisfy objective (3). We write Q(s) = (l/v(s))bar-Q(s) for a prescribed polynomial v(s). Bar-Q(s) is a polynomial matrix which is arbitrary except that Q(O) and the order of bar-Q(s) are fixed. Obeying these constraints bar-Q(s) is now to be 'shaped' to minimize the step response characteristics of specific input/output pairs according to the maximum envelope violations. This problem is expressed as a vector valued optimization problem using the concept of Pareto optimality. We then investigate a scalar optimization problem associated with this vector valued problem and show that it is convex. The organization of the report is as follows. The next section includes some definitions and preliminary lemmas. We then give the problem statement which is followed by a section including a detailed development of the design procedure. We then consider an aircraft control example. The last section gives some concluding remarks. The Appendix includes the proofs of technical lemmas, printouts of computer programs, and figures.

Dip TIPS as a facile and versatile method for fabrication of polymer foams with controlled shape, size and pore architecture for bioengineering applications.

PubMed

Kasoju, Naresh; Kubies, Dana; Kumorek, Marta M; Kříž, Jan; Fábryová, Eva; Machová, Lud'ka; Kovářová, Jana; Rypáček, František

2014-01-01

The porous polymer foams act as a template for neotissuegenesis in tissue engineering, and, as a reservoir for cell transplants such as pancreatic islets while simultaneously providing a functional interface with the host body. The fabrication of foams with the controlled shape, size and pore structure is of prime importance in various bioengineering applications. To this end, here we demonstrate a thermally induced phase separation (TIPS) based facile process for the fabrication of polymer foams with a controlled architecture. The setup comprises of a metallic template bar (T), a metallic conducting block (C) and a non-metallic reservoir tube (R), connected in sequence T-C-R. The process hereinafter termed as Dip TIPS, involves the dipping of the T-bar into a polymer solution, followed by filling of the R-tube with a freezing mixture to induce the phase separation of a polymer solution in the immediate vicinity of T-bar; Subsequent free-drying or freeze-extraction steps produced the polymer foams. An easy exchange of the T-bar of a spherical or rectangular shape allowed the fabrication of tubular, open- capsular and flat-sheet shaped foams. A mere change in the quenching time produced the foams with a thickness ranging from hundreds of microns to several millimeters. And, the pore size was conveniently controlled by varying either the polymer concentration or the quenching temperature. Subsequent in vivo studies in brown Norway rats for 4-weeks demonstrated the guided cell infiltration and homogenous cell distribution through the polymer matrix, without any fibrous capsule and necrotic core. In conclusion, the results show the "Dip TIPS" as a facile and adaptable process for the fabrication of anisotropic channeled porous polymer foams of various shapes and sizes for potential applications in tissue engineering, cell transplantation and other related fields.

Accelerometer Method and Apparatus for Integral Display and Control Functions

NASA Technical Reports Server (NTRS)

Bozeman, Richard J., Jr. (Inventor)

1996-01-01

Method and apparatus for detecting mechanical vibrations and outputting a signal in response thereto. Art accelerometer package having integral display and control functions is suitable for mounting upon the machinery to be monitored. Display circuitry provides signals to a bar graph display which may be used to monitor machine conditions over a period of time. Control switches may be set which correspond to elements in the bar graph to provide an alert if vibration signals increase in amplitude over a selected trip point. The circuitry is shock mounted within the accelerometer housing. The method provides for outputting a broadband analog accelerometer signal, integrating this signal to produce a velocity signal, integrating and calibrating the velocity signal before application to a display driver, and selecting a trip point at which a digitally compatible output signal is generated.

Accelerometer Method and Apparatus for Integral Display and Control Functions

NASA Technical Reports Server (NTRS)

Bozeman, Richard J., Jr. (Inventor)

1998-01-01

Method and apparatus for detecting mechanical vibrations and outputting a signal in response thereto is discussed. An accelerometer package having integral display and control functions is suitable for mounting upon the machinery to be monitored. Display circuitry provides signals to a bar graph display which may be used to monitor machine conditions over a period of time. Control switches may be set which correspond to elements in the bar graph to provide an alert if vibration signals increase in amplitude over a selected trip point. The circuitry is shock mounted within the accelerometer housing. The method provides for outputting a broadband analog accelerometer signal, integrating this signal to produce a velocity signal, integrating and calibrating the velocity signal before application to a display driver, and selecting a trip point at which a digitally compatible output signal is generated.

Computer simulations of channel meandering and the formation of point bars: Linking channel dynamics to the preserved stratigraphy

NASA Astrophysics Data System (ADS)

Sun, T.; Covault, J. A.; Pyrcz, M.; Sullivan, M.

2012-12-01

Meandering rivers are probably one of the most recognizable geomorphic features on earth. As they meander across alluvial and delta plains, channels migrate laterally and develop point bars, splays, levees and other geomorphic and sedimentary features that compose substantial portions of the fill within many sedimentary basins. These basins can include hydrocarbon producing fields. Therefore, a good understanding of the processes of meandering channels and their associated deposits is critical for exploiting these reservoirs in the subsurface. In the past couple of decades, significant progress has been made in our understanding of the morphodynamics of channel meandering. Basic fluid dynamics and sediment transport (Ikeda and Parker, 1981; Howard, 1992) has shown that many characteristic features of meandering rivers, such as the meandering wavelength, growth rate and downstream migration rate, can be predicted quantitatively. As a result, a number of variations and improvement of the theory have emerged (e.g., Blondeaux and Seminara, 1985; Parker and Andrews, 1985, 1986; and Sun et al., 2001a, b).The main improvements include the recognition of so called "bar-bend" interactions, where the development of bars on the channel bed and their interactions with the channel bend is recognized as a primary cause for meandering channels to develop greater complexity than the classic goose-neck meander bend shapes, such as compound bend. Recently, Sun and others have shown that the spatial patterns of width variations in meandering channels can be explained by an extrinsic periodic flow variations coupled with the intrinsic bend instability dynamics. In contrast to the significant improvement of our understanding of channel meandering, little work has been done to link the geomorphic features of meandering channels to the geometry and heterogeneity of the deposits they form and ultimately preserves. A computer simulation model based on the work of Sun and others (1996, 2001a,b) is used to investigate the formation and preservation of point bars with meandering rivers. Rather than consisting of a single set of concentric scroll bar like feature as one would expect from the pattern of meandering channels, observations of point bar deposits in map view reveal the previously mentioned complexity in their internal organization. A preserved point bar deposit is often found to be composed of multiple sets of remnant scroll bar like features, each with different orientations. Each set is bounded by the unconformity resulting from one set of the scroll bar like feature truncated by the other set. This study links the channel dynamics to the preserved point bar architectures, and delineates the key controls that affect the point bar internal organization.

A Weight Comparison of Several Attitude Controls for Satellites

NASA Technical Reports Server (NTRS)

Adams, James J.; Chilton, Robert G.

1959-01-01

A brief theoretical study has been made for the purpose for estimating and comparing the weight of three different types of controls that can be used to change the attitude of a satellite. The three types of controls are jet reaction, inertia wheel, and a magnetic bar which interacts with the magnetic field of the earth. An idealized task which imposed severe requirements on the angular motion of the satellite was used as the basis for comparison. The results showed that a control for one axis can be devised which will weigh less than 1 percent of the total weight of the satellite. The inertia-wheel system offers weight-saving possibilities if a large number of cycles of operation are required, whereas the jet system would be preferred if a limited number of cycles are required. The magnetic-bar control requires such a large magnet that it is impractical for the example application but might be of value for supplying small trimming moments about certain axes.

77 FR 39497 - Disease, Disability, and Injury Prevention and Control Special Emphasis Panel (SEP): Initial Review

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-03

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Disease... announced below concerns Special Interest Project (SIP): Evaluation of School Salad Bars as a Public Health...), the Centers for Disease Control and Prevention (CDC) announces the aforementioned meeting: Time and...

Mindfulness and Inhibitory Control in Early Adolescence

ERIC Educational Resources Information Center

Oberle, Eva; Schonert-Reichl, Kimberly A.; Lawlor, Molly Stewart; Thomson, Kimberly C.

2012-01-01

This study examined the relationship between the executive control process of inhibition and self-reported dispositional mindfulness, controlling for gender, grade, and cortisol levels in 99 (43% female) fourth- and fifth-graders ([X-bar] = 10.23 years, SD = 0.53). Students completed a measure of mindful attention awareness and a computerized…

Inner shelf morphologic controls on the dynamics of the beach and bar system, Fire Island, New York

USGS Publications Warehouse

Hapke, Cheryl J.; Schwab, William C.; Gayes, Paul T.; McCoy, Clay; Viso, Richard; Lentz, Erika E.; Rosati, Julie D.; Wang, Ping; Roberts, Tiffany M.

2011-01-01

The mechanism of sediment exchange between offshore sand ridges and the beach at Fire Island, New York is largely unknown. However, recent evidence from repeat nearshore bathymetry surveys, coupled with the complex but consistent bar morphology and patterns of shoreline change demonstrate that there is a feedback occurring between the regional geologic framework and modern processes. Analysis of bathymetric survey data provides direct confirmation that the offshore ridges are connected to the shoreface and are spatially persistent. The fixed nature of the nearshore morphology is further supported by time series camera data that indicate persistent bars with breaks that re-form in the same locations. A long-term time series of shoreline change shows distinct zones of erosion and accretion that are pervasive over time scales greater than a half-century, and their length-scales are similar to the spacing of the offshore ridge-trough system. The first-order geologic framework is responsible for the existence and locations of the ridges and troughs, which then influence the morphodynamics of the beach and bar system.

Increase in hospital purchase of hand hygiene products: The importance of focusing on the right product.

PubMed

Biswal, Manisha; Prasad, Amber; Dhaliwal, Navneet; Gupta, A K; Taneja, Neelam

2015-07-01

Alcohol-based handrub (AHR) consumption is positively correlated with increases in hand hygiene (HH) compliance. In our 2,000-bed hospital in India, multiple awareness drives have been conducted to promote HH. This study aimed to determine the quantitative effect of these campaigns on use of HH products (soap and AHR) in the hospital. Over the last 6 years, bar soap consumption has increased by 389.15%, whereas that of AHR increased by 146.7%. We also evaluated microbial contamination of 99 bar soap and 60 liquid soap samples in our hospital for a year. Of the samples, 61 (61.6%) of the bar soaps and 2 (3.3%) of the liquid soaps were found to be contaminated with various organisms (P < .0002). To conclude, the focus should be to increase the right kind of HH product so that hospitals in developing countries procure liquid soaps instead of bar soaps for handwashing purposes. Copyright © 2015 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Trace metal release after minimally-invasive repair of pectus excavatum.

PubMed

Fortmann, Caroline; Göen, Thomas; Krüger, Marcus; Ure, Benno M; Petersen, Claus; Kübler, Joachim F

2017-01-01

Several studies have shown a high incidence of metal allergy after minimally-invasive repair of pectus excavatum (MIRPE). We postulated that MIRPE is associated with a significant release of trace metal ions, possibly causing the allergic symptoms. We evaluated the concentration with chromium, cobalt and nickel in blood, urine and tissue in patients prior to MIRPE and in patients who underwent an explantation of the stainless-steel bar(s) after three years. Our study group consisted of 20 patients (mean age 19 years) who had bar explantation and our control group included 20 patients (mean age 16 years) prior to MIRPE. At the time of bar removal we detected significantly elevated concentrations of chromium and nickel in the tissue compared to patients prior to the procedure (p<0,001). We also found a significant increase in the levels of chromium in urine and nickel in blood in patients three years post MIRPE (p<0,001). Four patients temporarily developed symptoms of metal allergy, all had elevated metal values in blood and urine at explantation. Minimally-invasive repair of pectus excavatum can lead to a significant trace metal exposure.

Effects of a smoke-free law on hair nicotine and respiratory symptoms of restaurant and bar workers.

PubMed

Hahn, Ellen J; Rayens, Mary Kay; York, Nancy; Okoli, Chizimuzo T C; Zhang, Mei; Dignan, Mark; Al-Delaimy, Wael K

2006-09-01

Bar and restaurant workers' exposure to secondhand smoke (SHS) was compared before and 3 and 6 months after implementation of a smoke-free ordinance. Hair nicotine, self-reported exposure to SHS, and respiratory symptoms were assessed on 105 smoking and nonsmoking workers from randomly selected establishments in Lexington, Kentucky. Thirty-eight percent were current smokers with more than half smoking 10 or fewer cigarettes per day. Workers provided a hair sample at baseline and at the 3-month interview. There was a significant decline in hair nicotine 3 months postlaw when controlling for cigarettes smoked per day. Bar workers showed a significantly larger decline in hair nicotine compared with restaurant workers. The only significant decline in SHS exposure was in the workplace and other public places. Regardless of smoking status, respiratory symptoms declined significantly postlaw. Hospitality workers demonstrated significant declines in hair nicotine and respiratory symptoms after the law. Comprehensive smoke-free laws can provide the greatest protection to bar workers who are the most vulnerable to SHS exposure at work.

High temperature, low cycle fatigue of copper-base alloys in argon. Part 3: Zirconium-copper; thermal-mechanical strain cycling, hold-time and notch fatigue results

NASA Technical Reports Server (NTRS)

Conway, J. B.; Stentz, R. H.; Berling, J. T.

1973-01-01

The low-cycle fatigue characteristics of smooth bar and notched bar specimens (hourglass shape) of zirconium-copper, 1/2 Hard, material (R-2 Series) were evaluated at room temperature in axial strain control. Over the fatigue life range from about 300 to 3000 cycles the ratio of fatigue life for smooth bar to fatigue life for notched bar remained constant at a value of about 6.0. Some additional hold-time data for the R-2 alloy tested in argon at 538 C are reported. An analysis of the relaxation data obtained in these hold-time tests is also reported and it is shown that these data yield a fairly consistent correlation in terms of instantaneous stress rate divided by instantaneous stress. Two thermal-mechanical strain cycling tests were also performed using a cyclic frequency of 4.5 cycles per hour and a temperature cycling interval from 260 to 538 C. The fatigue life values in these tests were noticeably lower than that observed in isothermal tests at 538 C.

Advanced chip designs and novel cooling techniques for brightness scaling of industrial, high power diode laser bars

NASA Astrophysics Data System (ADS)

Heinemann, S.; McDougall, S. D.; Ryu, G.; Zhao, L.; Liu, X.; Holy, C.; Jiang, C.-L.; Modak, P.; Xiong, Y.; Vethake, T.; Strohmaier, S. G.; Schmidt, B.; Zimer, H.

2018-02-01

The advance of high power semiconductor diode laser technology is driven by the rapidly growing industrial laser market, with such high power solid state laser systems requiring ever more reliable diode sources with higher brightness and efficiency at lower cost. In this paper we report simulation and experimental data demonstrating most recent progress in high brightness semiconductor laser bars for industrial applications. The advancements are in three principle areas: vertical laser chip epitaxy design, lateral laser chip current injection control, and chip cooling technology. With such improvements, we demonstrate disk laser pump laser bars with output power over 250W with 60% efficiency at the operating current. Ion implantation was investigated for improved current confinement. Initial lifetime tests show excellent reliability. For direct diode applications <1 um smile and >96% polarization are additional requirements. Double sided cooling deploying hard solder and optimized laser design enable single emitter performance also for high fill factor bars and allow further power scaling to more than 350W with 65% peak efficiency with less than 8 degrees slow axis divergence and high polarization.

Light-front holographic distribution amplitudes of pseudoscalar mesons and their application to B -meson decays

DOE PAGES

Chang, Qin; Brodsky, Stanley J.; Li, Xin-Qiang

2017-05-30

In this article the dynamical spin effects of the light-front holographic wave functions for light pseudoscalar mesons are studied. These improved wave functions are then confronted with a number of hadronic observables: the decay constants of π and K mesons, their ξ -moments, the pion-to-photon transition form factor, and the pure annihilationmore » $$\\bar{B}_s$$ → π + π - and $$\\bar{B}_d$$ → K + K - decays. Taking f π , fK , and their ratio fK / f π as constraints, we perform a χ 2 analysis for the holographic parameters, including the mass scale parameter $$\\sqrtλ$$ and the effective quark masses, and find that the fitted results are quite consistent with the ones obtained from the light-quark hadronic Regge trajectories. In addition, we also show that the end point divergence appearing in the pure annihilation $$\\bar{B}_s$$ → π + π - and $$\\bar{B}_d$$ → K + K - decays can be controlled well by using these improved light-front holographic distribution amplitudes.« less

Modeling Droplet Heat and Mass Transfer during Spray Bar Pressure Control of the Multipurpose Hydrogen Test Bed (MHTB) Tank in Normal Gravity

NASA Technical Reports Server (NTRS)

Kartuzova, O.; Kassemi, M.

2016-01-01

A CFD model for simulating pressure control in cryogenic storage tanks through the injection of a subcooled liquid into the ullage is presented and applied to the 1g MHTB spray bar cooling experiments. An Eulerian-Lagrangian approach is utilized to track the spray droplets and capture the interaction between the discrete droplets and the continuous ullage phase. The spray model is coupled with the VOF model by performing particle tracking in the ullage, removing particles from the ullage when they reach the interface, and then adding their contributions to the liquid. A new model for calculating the droplet-ullage heat and mass transfer is developed. In this model, a droplet is allowed to warm up to the saturation temperature corresponding to the ullage vapor pressure, after which it evaporates while remaining at the saturation temperature. The droplet model is validated against the results of the MHTB spray-bar cooling experiments with 50% and 90% tank fill ratios. The predictions of the present T-sat based model are compared with those of a previously developed kinetic-based droplet mass transfer model. The predictions of the two models regarding the evolving tank pressure and temperature distributions, as well as the droplets' trajectories and temperatures, are examined and compared in detail. Finally, the ullage pressure and local vapor and liquid temperature evolutions are validated against the corresponding data provided by the MHTB spray bar mixing experiment.

Consolidation of geologic studies of geopressured-geothermal resources in Texas: Barrier-bar tidal-channel reservoir facies architecture, Jackson Group, Prado field, South Texas; Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seni, S.J.; Choh, S.J.

1994-01-01

Sandstone reservoirs in the Jackson barrier/strandplain play are characterized by low recovery efficiencies and thus contain a large hydrocarbon resource target potentially amenable to advanced recovery techniques. Prado field, Jim Hogg County, South Texas, has produced over 23 million bbl of oil and over 32 million mcf gas from combination structural-stratigraphic traps in the Eocene lower Jackson Group. Hydrocarbon entrapment at Prado field is a result of anticlinal nosing by differential compaction and updip pinch-out of barrier bar sandstone. Relative base-level lowering resulted in forced regression that established lower Jackson shoreline sandstones in a relatively distal location in central Jimmore » Hogg County. Reservoir sand bodies at Prado field comprise complex assemblages of barrier-bar, tidal-inlet fill, back-barrier bar, and shoreface environments. Subsequent progradation built the barrier-bar system seaward 1 to 2 mi. Within the barrier-bar system, favorable targets for hydrocarbon reexploration are concentrated in tidal-inlet facies because they possess the greatest degree of depositional heterogeneity. The purpose of this report is (1) to describe and analyze the sand-body architecture, depositional facies variations, and structure of Prado field, (2) to determine controls on distribution of hydrocarbons pertinent to reexploration for bypassed hydrocarbons, (3) to describe reservoir models at Prado field, and (4) to develop new data affecting the suitability of Jackson oil fields as possible candidates for thermally enhanced recovery of medium to heavy oil.« less

Tactile orientation perception: an ideal observer analysis of human psychophysical performance in relation to macaque area 3b receptive fields

PubMed Central

Peters, Ryan M.; Staibano, Phillip

2015-01-01

The ability to resolve the orientation of edges is crucial to daily tactile and sensorimotor function, yet the means by which edge perception occurs is not well understood. Primate cortical area 3b neurons have diverse receptive field (RF) spatial structures that may participate in edge orientation perception. We evaluated five candidate RF models for macaque area 3b neurons, previously recorded while an oriented bar contacted the monkey's fingertip. We used a Bayesian classifier to assign each neuron a best-fit RF structure. We generated predictions for human performance by implementing an ideal observer that optimally decoded stimulus-evoked spike counts in the model neurons. The ideal observer predicted a saturating reduction in bar orientation discrimination threshold with increasing bar length. We tested 24 humans on an automated, precision-controlled bar orientation discrimination task and observed performance consistent with that predicted. We next queried the ideal observer to discover the RF structure and number of cortical neurons that best matched each participant's performance. Human perception was matched with a median of 24 model neurons firing throughout a 1-s period. The 10 lowest-performing participants were fit with RFs lacking inhibitory sidebands, whereas 12 of the 14 higher-performing participants were fit with RFs containing inhibitory sidebands. Participants whose discrimination improved as bar length increased to 10 mm were fit with longer RFs; those who performed well on the 2-mm bar, with narrower RFs. These results suggest plausible RF features and computational strategies underlying tactile spatial perception and may have implications for perceptual learning. PMID:26354318

Enhanced sediment loading facilitates point bar growth and accelerates bank erosion along a modelled meander bend on the Sacramento River, USA

NASA Astrophysics Data System (ADS)

Ahmed, J.; Constantine, J. A.; Hales, T. C.

2017-12-01

Meandering channels provide a conduit through which sediment and water is routed from the uplands to the sea. Alluvial material is periodically stored and transported through the channel network as permitted by the prevailing hydrologic conditions. The lowlands are typically characterised by accumulations of sediment attached to the inner banks of meander bends (point bars). These bedforms have been identified as important for facilitating a link between in-stream sediment supplies and channel dynamism. A 2D curvilinear hydrodynamic model (MIKE 21C) was used to perform a number of experiments in which the sediment load was adjusted to investigate how changes in alluvial material fluxes affect the development of point bars and the resultant patterns of bank erosion. A doubling of the sediment load caused a longitudinal increase in the bar in the upstream direction and caused a coeval doubling of the transverse channel slope at the meander apex. The upstream growth of the point bar was accompanied by an increase in length over which lateral migration took place at the outer bank. The magnitude of outer bank erosion was 9-times greater for the high-sediment simulation. These results suggest that enhanced sediment loads (potentially the result of changes in land use or climate) can trigger greater rates of bank erosion and channel change through the sequestration of alluvial material on point bars, which encourage high-velocity fluid deflection towards the outer bank of the meander. This controls riparian habitat development and exchanges of sediment and nutrients across the channel-floodplain interface.

Reconfigurable pipelined processor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saccardi, R.J.

1989-09-19

This patent describes a reconfigurable pipelined processor for processing data. It comprises: a plurality of memory devices for storing bits of data; a plurality of arithmetic units for performing arithmetic functions with the data; cross bar means for connecting the memory devices with the arithmetic units for transferring data therebetween; at least one counter connected with the cross bar means for providing a source of addresses to the memory devices; at least one variable tick delay device connected with each of the memory devices and arithmetic units; and means for providing control bits to the variable tick delay device formore » variably controlling the input and output operations thereof to selectively delay the memory devices and arithmetic units to align the data for processing in a selected sequence.« less

Does smoke-free legislation and smoking outside bars increase feelings of stigmatization among smokers? Findings from the International Tobacco Control (ITC) Netherlands Survey.

PubMed

Nagelhout, Gera E; Willemsen, Marc C; Gebhardt, Winifred A; van den Putte, Bas; Hitchman, Sara C; Crone, Matty R; Fong, Geoffrey T; van der Heiden, Sander; de Vries, Hein

2012-11-01

This study examined whether smokers' perceived level of stigmatization changed after the implementation of smoke-free hospitality industry legislation and whether smokers who smoked outside bars reported more perceived stigmatization. Longitudinal data from the International Tobacco Control (ITC) Netherlands Survey was used, involving a nationally representative sample of 1447 smokers aged 15 years and older. Whether smoke-free legislation increases smokers' perceived stigmatization depends on how smokers feel about smoking outside. The level of perceived stigmatization did not change after the implementation of smoke-free hospitality industry legislation in the Netherlands, possibly because most Dutch smokers do not feel negatively judged when smoking outside. Copyright © 2012 Elsevier Ltd. All rights reserved.

Burst-by-burst laser frequency monitor

NASA Technical Reports Server (NTRS)

Esproles, Carlos (Inventor)

1994-01-01

The invention is a system for real-time frequency monitoring and display of an RF burst where the burst frequency is analyzed and displayed on a burst-by-burst basis in order to allow for frequency control. Although the invention was made for monitoring the laser frequency of a LIDAR system, it has other applications where realtime monitoring is required. The novelty of the invention resides in the use of a counter that is reset at the beginning of each unit time of monitoring and then gated for a unit of time. The invention also has an LED bar graph for displaying the measure of frequency at the end of each unit time in either a bar length mode or a moving dot mode. In the latter mode, the operator makes necessary adjustments to maintain the dot at the center of the bar graph.

Feeding Strategies Derived from Behavioral Economics and Psychology Can Increase Vegetable Intake in Children as Part of a Home-Based Intervention: Results of a Pilot Study.

PubMed

Cravener, Terri L; Schlechter, Haley; Loeb, Katharine L; Radnitz, Cynthia; Schwartz, Marlene; Zucker, Nancy; Finkelstein, Stacey; Wang, Y Claire; Rolls, Barbara J; Keller, Kathleen L

2015-11-01

Behavioral economics and psychology have been applied to altering food choice, but most studies have not measured food intake under free-living conditions. To test the effects of a strategy that pairs positive stimuli (ie, stickers and cartoon packaging) with vegetables and presents them as the default snack. A randomized controlled trial was conducted with children who reported consumption of fewer than two servings of vegetables daily. Children (aged 3 to 5 years) in both control (n=12) and treatment (n=12) groups received a week's supply of plainly packaged (ie, generic) vegetables, presented by parents as a free choice with an alternative snack (granola bar), during baseline (Week 1) and follow-up (Week 4). During Weeks 2 and 3, the control group continued to receive generic packages of vegetables presented as a free choice, but the treatment group received vegetables packaged in containers with favorite cartoon characters and stickers inside, presented by parents as the default choice. Children in the treatment group were allowed to opt out of the vegetables and request the granola bar after an imposed 5-minute wait. General Linear Model repeated measures analysis of variance was conducted to compare vegetable and granola bar intake between control and treatment groups across the 4-week study. Both within- and between-subjects models were tested. A time×treatment interaction on vegetable intake was significant. The treatment group increased vegetable intake from baseline to Week 2 relative to control (P<0.01), but the effects were not sustained at Week 4 when the treatment was removed. Granola bar intake decreased in the treatment group at Week 2 (P≤0.001) and Week 3 (P≤0.005) relative to baseline. Parents were able to administer feeding practices derived from behavioral economics and psychology in the home to increase children's vegetable intake and decrease intake of a high-energy-density snack. Additional studies are needed to test the long-term sustainability of these practices. Copyright © 2015 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Consumer Acceptance of Bars and Gummies with Unencapsulated and Encapsulated Resveratrol.

PubMed

Koga, Clarissa C; Lee, Soo-Yeun; Lee, Youngsoo

2016-05-01

The addition of resveratrol, a polyphenol found in red wine and peanuts, to food products would help to provide the health benefits associated with the compound to the consumer in a wide array of food matrices. The bitterness of resveratrol and instability of its bioactive form in light are 2 major challenges with the incorporation of the compound into food products. Microencapsulation in a sodium caseinate matrix was utilized as a strategy to overcome these challenges. The objective of this research was to show the application of the resveratrol microcapsules in easy-to-consume foods. Consumer acceptance was evaluated for gummies and bars with encapsulated resveratrol in comparison to the controls. Four different controls were used: 1) without any resveratrol OR protein (Plain), 2) unencapsulated resveratrol (Resv), 3) sodium caseinate and unencapsulated resveratrol just mixed without encapsulation (P + R), and 4) sodium caseinate only (PRO). Two concentrations of resveratrol that have been shown to offer therapeutic effects in humans were tested (10 and 40 mg/d). The overall liking, evaluated using a 9-point scale, of bars with 10 mg of encapsulated resveratrol did not differ significantly from the control without any added resveratrol and protein (Plain) or from the controls with equivalent protein and/or resveratrol concentrations. For gummies, the samples with the resveratrol microcapsules had a significantly lower overall liking than the controls with the same protein and/or resveratrol content. This research demonstrated application of resveratrol microcapsules into easy-to-consume food products in order to deliver the health benefits to the consumer. © 2016 Institute of Food Technologists®

Flexibility of Expressive Timing in Repeated Musical Performances

PubMed Central

Demos, Alexander P.; Lisboa, Tânia; Chaffin, Roger

2016-01-01

Performances by soloists in the Western classical tradition are normally highly prepared, yet must sound fresh and spontaneous. How do musicians manage this? We tested the hypothesis that they achieve the necessary spontaneity by varying the musical gestures that express their interpretation of a piece. We examined the tempo arches produced by final slowing at the ends of phrases in performances of J. S. Bach’s No. 6 (Prelude) for solo cello (12 performances) and the Italian Concerto (Presto) for solo piano (eight performances). The performances were given by two experienced concert soloists during a short time period (3½ months for the Prelude, 2 weeks for the Presto) after completing their preparations for public performance. We measured the tempo of each bar or half-bar, and the stability of tempo across performances (difference of the tempo of each bar/half bar from each of the other performances). There were phrase arches for both tempo and stability with slower, less stable tempi at beginnings and ends of phrases and faster, more stable tempi mid-phrase. The effects of practice were complex. Tempo decreased overall with practice, while stability increased in some bars and decreased in others. One effect of practice may be to imbue well-learned, automatic motor sequences with freshness and spontaneity through cognitive control at phrase boundaries where slower tempi and decreased stability provide opportunities for slower cognitive processes to modulate rapid automatic motor sequences. PMID:27757089

A field study of bar-sponsored drink specials and their associations with patron intoxication.

PubMed

Thombs, Dennis L; O'Mara, Ryan; Dodd, Virginia J; Hou, Wei; Merves, Michele L; Weiler, Robert M; Pokorny, Steven B; Goldberger, Bruce A; Reingle, Jennifer; Werch, Chudley Chad E

2009-03-01

The study examined associations between bar-sponsored drink specials and alcohol intoxication at the patron level. Data were collected in a college bar district located in a large campus community in the southeastern United States. Random and self-selected samples of patrons were interviewed after exiting college bars at night on four different nights (N=383). Anonymous interview and questionnaire data were collected as well as breath alcohol concentration (BrAC) readings. Significant gender differences existed in patron drinking practices. Women were more likely to take advantage of drink specials, whereas men reported greater alcohol expenditures, consumed more drinks, and drank for longer periods of time. Gender differences in BrAC were very small and not meaningful. Patrons who did not take advantage of drink specials reported consuming more drinks before bar entry than patrons who did participate in these promotions. Participation in "all-you-can-drink" promotions was significantly associated with higher BrAC readings after adjusting for covariates and random effects attributable to drinking establishment. Other drink specials did not have significant associations with alcohol intoxication. The all-you-can-drink special may be the specific discounting practice with the greatest potential for boosting patron intoxication and thus may need to be a stronger focus of alcohol-control policies aimed at improving the beverage service of drinking establishments.

Evaluation of Bar, Barnase, and Barstar recombinant proteins expressed in genetically engineered Brassica juncea (Indian mustard) for potential risks of food allergy using bioinformatics and literature searches.

PubMed

Siruguri, Vasanthi; Bharatraj, Dinesh Kumar; Vankudavath, Raju Naik; Mendu, Vishnu Vardhana Rao; Gupta, Vibha; Goodman, Richard E

2015-09-01

The potential allergenicity of Bar, Barnase, and Barstar recombinant proteins expressed in genetically engineered mustard for pollination control in plant breeding was evaluated for regulatory review. To evaluate the potential allergenicity of the Bar, Barnase and Barstar proteins amino acid sequence comparisons were made to those of known and putative allergens, and search for published evidence to the sources of the genes using the AllergenOnline.org database. Initial comparisons in 2012 were performed with version 12 by methods recommended by the Codex Alimentarius Commission and the Indian Council of Medical Research, Government of India. Searches were repeated with version 15 in 2015. A literature search was performed using PubMed to identify reports of allergy associated with the sources of the three transgenes. Potential open reading frames at the DNA insertion site were evaluated for matches to allergens. No significant sequence identity matches were identified with Bar, Barnase or Barstar proteins or potential fusion peptides at the genomic-insert junctions compared to known allergens. No references were identified that associated the sources of the genes with allergy. Based on these results we conclude that the Bar, Barnase and Barstar proteins are unlikely to present any significant risk of food allergy to consumers. Copyright © 2015 Elsevier Ltd. All rights reserved.

Smoking restrictions in bars and bartender smoking in the US, 1992-2007.

PubMed

Bitler, Marianne P; Carpenter, Christopher; Zavodny, Madeline

2011-05-01

The present work is an analysis of whether adoption of state clean indoor air laws (SCIALs) covering bars reduces the proportion of bartenders who smoke primarily by reducing smoking among people already employed as bartenders when restrictions are adopted or by changing the composition of the bartender workforce with respect to smoking behaviours. Logistic regressions were estimated for a variety of smoking outcomes, controlling for individual demographic characteristics, state economic characteristics, and state, year, and month fixed effects, using data on 1380 bartenders from the 1992-2007 Tobacco Use Supplement to the Current Population Survey combined with data on SCIALs from ImpacTeen. State restrictions on smoking in bars are negatively associated with whether a bartender smokes, with a 1-point increase in restrictiveness (on a scale of 0-3) associated with a 5.3% reduction in the odds of smoking. Bar SCIALs are positively associated with the likelihood a bartender reports never having smoked cigarettes but not with the likelihood a bartender reports having been a former smoker. State clean indoor air laws covering bars appear to reduce smoking among bartenders primarily by changing the composition of the bartender workforce with respect to smoking rather than by reducing smoking among people already employed as bartenders when restrictions are adopted. Such laws may nonetheless be an important public health tool for reducing secondhand smoke.

Impact of the Lok-bar for High-precision Radiotherapy with Tomotherapy.

PubMed

Hirata, Makoto; Monzen, Hajime; Tamura, Mikoto; Kubo, Kazuki; Matsumoto, Kenji; Hanaoka, Kohei; Okumura, Masahiko; Nishimura, Yasumasa

2018-05-01

Patient immobilization systems are used to establish a reproducible patient position relative to the couch. In this study, the impact of conventional lok-bars for CT-simulation (CIVCO-bar) and treatment (iBEAM-bar) were compared with a novel lok-bar (mHM-bar) in tomotherapy. Verification was obtained as follows: i. artifacts in CT images; ii. dose attenuation rate of lok-bar, compared to without lok-bar; and iii. dose differences between the calculated and measured absorbed doses. With the CIVCO-bar, there were obvious metal artifacts, while there were nearly no artifacts with the mHM-bar. The mean dose attenuation rates with the mHM-bar and iBEAM-bar were 1.31% and 2.28%, and the mean dose difference was 1.55% and 1.66% for mHM-bar and iBEAM-bar. Using the mHM-bar reduced artifacts on the CT image and improved dose attenuation are obtained. The lok-bar needs to be inserted as a structure set in treatment planning with tomotherapy. Copyright© 2018, International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.

CFD Modeling of the Multipurpose Hydrogen Test Bed (MHTB) Self-Pressurization and Spray Bar Mixing Experiments in Normal Gravity: Effect of Accommodation Coefficient on the Tank Pressure

NASA Technical Reports Server (NTRS)

Kartuzova, Olga; Kassemi, Mohammad

2015-01-01

In this paper, a computational model that describes pressure control phase of a typical MHTB experiment will be presented. The fidelity of the model will be assessed by comparing the models predictions with MHTB experimental data. In this paper CFD results for MHTB spray bar cooling case with 50 tank fill ratio will be presented and analyzed. Effect of accommodation coefficient for calculating droplet-ullage mass transfer will be evaluated.

Nanoforging - Innovation in three-dimensional processing and shaping of nanoscaled structures.

PubMed

Landefeld, Andreas; Rösler, Joachim

2014-01-01

This paper describes the shaping of freestanding objects out of metallic structures in the nano- and submicron size. The technique used, called nanoforging, is very similar to the macroscopic forging process. With spring actuated tools produced by focused ion beam milling, controlled forging is demonstrated. With only three steps, a conical bar stock is transformed to a flat- and semicircular bent bar stock. Compared with other forming techniques in the reduced scale, nanoforging represents a beneficial approach in forming freestanding metallic structures, due to its simplicity, and supplements other forming techniques.

Cam-controlled boring bar

DOEpatents

Glatthorn, Raymond H.

1986-01-01

A cam-controlled boring bar system (100) includes a first housing (152) which is rotatable about its longitudinal axis (154), and a second housing in the form of a cam-controlled slide (158) which is also rotatable about the axis (154) as well as being translatable therealong. A tool-holder (180) is mounted within the slide (158) for holding a single point cutting tool. Slide (158) has a rectangular configuration and is disposed within a rectangularly configured portion of the first housing (152). Arcuate cam slots (192) are defined within a side plate (172) of the housing (152), while cam followers (194) are mounted upon the cam slide (158) for cooperative engagement with the cam slots (192). In this manner, as the housing (152) and slide (158) rotate, and as the slide (158) also translates, a through-bore (14) having an hourglass configuration will be formed within a workpiece (16) which may be, for example, a nuclear reactor steam generator tube support plate.

Monitoring and research to describe geomorphic effects of the 2011 controlled flood on the Green River in the Canyon of Lodore, Dinosaur National Monument, Colorado and Utah

USGS Publications Warehouse

Mueller, Erich R.; Grams, Paul E.; Schmidt, John C.; Hazel, Joseph E.; Kaplinski, Matt; Alexander, Jason A.; Kohl, Keith

2014-01-01

In 2011, a large magnitude flow release from Flaming Gorge Reservoir, Wyoming and Utah, occurred in response to high snowpack in the middle Rocky Mountains. This was the third highest recorded discharge along the Green River downstream of Flaming Gorge Dam, Utah, since its initial closure in November 1962 and motivated a research effort to document effects of these flows on channel morphology and sedimentology at four long-term monitoring sites within the Canyon of Lodore in Dinosaur National Monument, Colorado and Utah. Data collected in September 2011 included raft-based bathymetric surveys, ground-based surveys of banks, channel cross sections and vegetation-plot locations, sand-bar stratigraphy, and painted rock recovery on gravel bars. As part of this surveying effort, Global Navigation Satellite System (GNSS) data were collected at benchmarks on the canyon rim and along the river corridor to establish a high-resolution survey control network. This survey control network allows for the collection of repeatable spatial and elevation data necessary for high accuracy geomorphic change detection. Nearly 10,000 ground survey points and more than 20,000 bathymetric points (at 1-meter resolution) were collected over a 5-day field campaign, allowing for the construction of reach-scale digital elevation models (DEMs). Additionally, we evaluated long-term geomorphic change at these sites using repeat topographic surveys of eight monumented cross sections at each of the four sites. Analysis of DEMs and channel cross sections show a spatially variable pattern of erosion and deposition, both within and between reaches. As much as 5 meters of scour occurred in pools downstream from flow constrictions, especially in channel segments where gravel bars were absent. By contrast, some channel cross sections were stable during the 2011 floods, and have shown almost no change in over a decade of monitoring. Partial mobility of gravel bars occurred, and although in some locations vegetation such as tamarisk (Tamarix ramosissima) was damaged, wholesale bed motion necessary to fully clear these surfaces was not evident. In flow recirculation zones, eddy sandbars aggraded one meter or more, increasing the area of bars exposed during typical dam operations. Yet overall, the 2011 flood resulted in a decrease in reach-scale sand storage because bed degradation exceeded bar deposition. The 2011 response is consistent with that of a similar event in 1999, which was followed by sand-bar erosion and sediment accumulation on the bed during subsequent years of normal dam operational flows. Although the 1999 and 2011 floods were exceptional in the post-dam system, they did not exceed the pre-dam 2-year flood, isolating their effects to the modern active channel with minor erosion or reworking of pre-dam deposits stabilized through vegetation encroachment.

Optical characterization of the oceanic unicellular cyanobacterium Synechococcus grown under a day-night cycle in natural irradiance

NASA Technical Reports Server (NTRS)

Stramski, Dariusz; Shalapyonok, Alexi; Reynolds, Rick A.

1995-01-01

The optical properties of the ocenanic cyanobacterium Synechococcus (clone WH8103) were examined in a nutrient-replete laboratory culture grown under a day-night cycle in natural irradiance. Measurements of the spectral absorption and beam attenuation coefficients, the size distribution of cells in suspension, and microscopic analysis of samples were made at intervals of 2-4 hours for 2 days. These measurements were used to calculate the optical properties at the level of a single 'mean' cell representative of the acutal population, specifically, the optical cross sections for spectral absorption bar-(sigma(sub a)), scattering bar-sigma(sub b))(lambda), and attentuation bar-(sigma(sub c))(lambda). In addition, concurrent determinations of chlorophyll a and particulate organic carbon allowed calculation of the Chl a- and C-specific optical coefficients. The refractive index of cells was derived from the observed data using a theory of light absorption and scattering by homogeneous spheres. Low irradiance because of cloudy skies resulted in slow division rates of cells in the culture. The percentage of dividing cells was unusually high (greater than 30%) throughout the experiment. The optical cross sections varied greatly over a day-night cycle, with a minimum near dawn or midmorning and maximum near dusk. During daylight hours, bar-(sigma(sub b)) and bar-(sigma(sub c)) can increase more than twofold and bar-(sigma(sub a) by as much as 45%. The real part of the refractive index n increaed during the day; changes in n had equal or greater effect than the varying size distribution on changes in bar-(sigma(sub c)) and bar-(sigma(sub b)). The contribution of changes in n to the increase of bar-(sigma(sub c))(660) during daylight hours was 65.7% and 45.1% on day 1 and 2, respectively. During the dark period, when bar-(sigma(sub c))(660) decreased by a factor of 2.9, the effect of decreasing n was dominant (86.3%). With the exception of a few hours during the second light period, the imaginary part of the refractive index n' showed little variation over a day-night cycle, and bar-(sigma(sub a)) was largely controlled by variations in cell size. The real part of the refractive index at lambda = 660 nm was correlated with the intracellular C concentration and the imaginary part at lambda = 678 nm with the intracellular Chl a concentration. The C-specfic attenuation coefficient showed significant diel variability, which has implications for the estimation of oceanic primary production from measurements of diel variability in beam attenuation. This study provides strong evidence that diel variability is an important component of the optical characterization of marine phytoplankton.

Demographic response of northern spotted owls to barred owl removal

USGS Publications Warehouse

Diller, V. Lowell; Hamm, Keith A; Early, Desiree A; Lamphear, David W; Dugger, Katie M.; Yackulic, Charles B.; Schwarz, Carl J.; Carlson, Peter C.; McDonald, Trent L.

2016-01-01

Federally listed as threatened in 1990 primarily because of habitat loss, the northern spotted owl (Strix occidentalis caurina) has continued to decline despite conservation efforts resulting in forested habitat being reserved throughout its range. Recently, there is growing evidence the congeneric invasive barred owl (Strix varia) may be responsible for the continued decline primarily by excluding spotted owls from their preferred habitat. We used a long-term demographic study for spotted owls in coastal northern California as the basis for a pilot barred owl removal experiment. Our demography study used capture–recapture, reproductive output, and territory occupancy data collected from 1990 to 2013 to evaluate trends in vital rates and populations. We used a classic before-after-control-impact (BACI) experimental design to investigate the demographic response of northern spotted owls to the lethal removal of barred owls. According to the best 2-species dynamic occupancy model, there was no evidence of differences in barred or northern spotted owl occupancy prior to the initiation of the treatment (barred owl removal). After treatment, barred owl occupancy was lower in the treated relative to the untreated areas and spotted owl occupancy was higher relative to the untreated areas. Barred owl removal decreased spotted owl territory extinction rates but did not affect territory colonization rates. As a result, spotted owl occupancy increased in the treated area and continued to decline in the untreated areas. Prior to and after barred owl removal, there was no evidence that average fecundity differed on the 2 study areas. However, the greater number of occupied spotted owl sites on the treated areas resulted in greater productivity in the treated areas based on empirical counts of fledged young. Prior to removal, survival was declining at a rate of approximately 0.2% per year for treated and untreated areas. Following treatment, estimated survival was 0.859 for the treated areas and 0.822 for the untreated areas. Derived estimates of population change on both study areas showed the same general decline before removal with an estimated slope of –0.0036 per year. Following removal, the rate of population change on the treated areas increased to an average of 1.029 but decreased to an average of 0.870 on the untreated areas. The results from this first experiment demonstrated that lethal removal of barred owls allowed the recovery of northern spotted owl populations in the treated portions of our study area. If additional federally funded barred owl removal experiments provide similar results, this could be the foundation for development of a long-term conservation strategy for northern spotted owls.

Randomized multicenter comparison of 2 IMZ and 4 TPS screw implants supporting bar-retained overdentures in 425 edentulous mandibles.

PubMed

Mau, Jochen; Behneke, Alexandra; Behneke, Nikolaus; Fritzemeier, Claus Udo; Gomez-Roman, German; d'Hoedt, Bernd; Spiekermann, Hubertus; Strunz, Volker; Yong, Mei

2003-01-01

Two treatment concepts for implant-supported bar retention of mandibular overdentures-2 intramobile cylinder (IMZ) implants and a Dolder bar and 4 titanium plasma-sprayed (TPS) screw implants and an angulated bar-were compared in a randomized controlled clinical trial with respect to postprosthetic efficacy and safety. Four hundred twenty-five patients with edentulous mandibles were enrolled; 212 were randomized to TPS implants (control group) and 213 to IMZ implants (test group). Endpoints were occurrences of postprosthetic integration deficiency (ID), functional deficiency (FD), and complications. The trial was sized to detect a 10% difference in 5-year ID-free postprosthetic system lifetime with a power of 80%. With 340 protocol-completed cases, the trial achieved its predetermined power. The 2 systems did not show statistically significant differences in occurrences of postprosthetic ID and FD; 5-year occurrence-free postprosthetic system lifetime probabilities were estimated as 42.5% with IMZ and 42.8% with TPS, for ID; and as 82.6% with IMZ and 87.2% with TPS, for FD. However, at 3 to 6 months after surgery, mean Periotest values were significantly higher (P = .0001 without adjustment) with IMZ implants (5.6, SD 4.2) than with TPS implants (0.8, SD 4.3). TPS implants showed a higher incidence of inflammation and recession, while IMZ implants had a higher incidence of implant fracture after functional loading. The system-wise approach overcomes potential bias with implant-wise analyses. A combination of radiographic and clinical criteria distinguishes between desirable integration and functional anchorage. The in situ survival rates at 5 years in this study (95% for IMZ, 92% for TPS) match rates reported in the literature. This study demonstrated equivalent efficacy of 2 IMZ cylinders and 4 TPS screws in implant-supported, bar-retained mandibular overdentures and indicated a higher rate of complications with the TPS screw implants.

Improvement of the antifungal activity of Litsea cubeba vapor by using a helium-neon (He-Ne) laser against Aspergillus flavus on brown rice snack bars.

PubMed

Suhem, Kitiya; Matan, Narumol; Matan, Nirundorn; Danworaphong, Sorasak; Aewsiri, Tanong

2015-12-23

The aim of this study was to improve the antifungal activity of the volatile Litsea cubeba essential oil and its main components (citral and limonene) on brown rice snack bars by applying He-Ne laser treatment. Different volumes (50-200 μL) of L. cubeba, citral or limonene were absorbed into a filter paper and placed inside an oven (18 L). Ten brown rice snack bars (2 cm wide × 4 cm long × 0.5 cm deep) were put in an oven and heated at 180 °C for 20 min. The shelf-life of the treated snack bars at 30 °C was assessed and sensory testing was carried out to investigate their consumer acceptability. A count of total phenolic content (TPC) and Fourier transform infrared spectroscopy (FTIR) on the properties of essential oil, citral, and limonene before and after the laser treatment was studied for possible modes of action. It was found that the laser treatment improved the antifungal activity of the examined volatile L. cubeba and citral with Aspergillus flavus inhibition by 80% in comparison with those of the control not treated with the laser. L. cubeba vapor at 100 μL with the laser treatment was found to completely inhibit the growth of natural molds on the snack bars for at least 25 days; however, without essential oil vapor and laser treatment, naturally contaminating mold was observed in 3 days. Results from the sensory tests showed that the panelists were unable to detect flavor and aroma differences between essential oil treatment and the control. Laser treatment caused an increase in TPC of citral oil whereas the TPC in limonene showed a decrease after the laser treatment. These situations could result from the changing peak of the aliphatic hydrocarbons that was revealed by the FTIR spectra. Copyright © 2015 Elsevier B.V. All rights reserved.

Linking Metabolism, Elemental Cycles, and Environmental Conditions in the Deep Biosphere: Growth of a Model Extremophile, Archaeoglobus fulgidus, Under High-Pressure Conditions

NASA Astrophysics Data System (ADS)

Oliver, G. C. M.; Cario, A.; Rogers, K. L.

2015-12-01

A majority of Earth's biosphere is hosted in subsurface environments where global-scale biogeochemical and energy cycles are driven by diverse microbial communities that operate on and are influenced by micro-scale environmental variables. While the subsurface hosts a variety of geochemical and geothermal conditions, elevated pressures are common to all subsurface ecosystems. Understanding how microbes adapt to and thrive in high-pressure environments is essential to linking microbial subsurface processes with global-scale cycles. Here we are using a model extremophile, Archaeoglobus fulgidus, to determine how elevated pressures affect the growth, metabolism, and physiology of subsurface microorganisms. A. fulgidus cycles carbon and sulfur via heterotrophic and autotrophic sulfate reduction in various high temperature and high-pressure niches including shallow marine vents, deep-sea hydrothermal vents, and deep oil reservoirs. Here we report the results of A. fulgidus growth experiments at optimum temperature, 83°C, and pressures up to 600 bars. Exponential growth was observed over the entire pressure range, though growth rates were diminished at 500 and 600 bars compared to ambient pressure experimental controls. At pressures up to 400 bars, cell density yields and growth rates were at least as high as ambient pressure controls. Elevated pressures and extended incubation times stimulated cell flocculation, a common stress response in this strain, and cellular morphology was affected at pressures exceeding 400 bars. These results suggest that A. fulgidus continues carbon, sulfur and energy cycling unaffected by elevated pressures up to 400 bars, representing a variety of subsurface environments. The ability of subsurface organisms to drive biogeochemical cycles at elevated pressures is a critical link between the surface and subsurface biospheres and understanding how species-scale processes operate under these conditions is a vital part of global-scale biogeochemical models.

Tobacco Marketing Receptivity and Other Tobacco Product Use Among Young Adult Bar Patrons.

PubMed

Thrul, Johannes; Lisha, Nadra E; Ling, Pamela M

2016-12-01

Use of other tobacco products (smokeless tobacco, hookah, cigarillo, and e-cigarettes) is increasing, particularly among young adults, and there are few regulations on marketing for these products. We examined the associations between tobacco marketing receptivity and other tobacco product (OTP) use among young adult bar patrons (aged 18-26 years). Time-location sampling was used to collect cross-sectional surveys from 7,540 young adult bar patrons from January 2012 through March of 2014. Multivariable logistic regression analyses in 2015 examined if tobacco marketing receptivity was associated (1) with current (past 30 day) OTP use controlling for demographic factors and (2) with dual/poly use among current cigarette smokers (n = 3,045), controlling for demographics and nicotine dependence. Among the entire sample of young adult bar patrons (Mean age  = 23.7, standard deviation = 1.8; 48.1% female), marketing receptivity was consistently associated with current use of all OTP including smokeless tobacco (adjusted odds ratio [AOR]= 2.56, 95% confidence interval [CI] 2.08-3.16, p < .001), hookah (AOR = 1.97, 95% CI 1.58-2.43, p < .001), cigarillos (AOR = 3.00, 95% CI 2.21-4.08, p < .001), electronic cigarettes (AOR = 2.43, 95% CI 1.93-3.04, p < .001), and multiple tobacco products (AOR = 2.93, 95% CI 2.45-3.51, p < .001). Among current smokers, marketing receptivity was significantly associated with use of smokeless tobacco (AOR = 1.63, 95% CI 1.22-2.18, p < .01), cigarillos (AOR = 1.81, 95% CI 1.22-2.70, p < .01), and multiple tobacco products (AOR = 1.58, 95% CI 1.27-1.97, p < .001). OTP use is common among young adult bar patrons, and it is associated with tobacco marketing receptivity. Efforts to limit tobacco marketing should address OTP in addition to cigarettes. Copyright © 2016 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

Tobacco marketing receptivity and other tobacco product use among young adult bar patrons

PubMed Central

Thrul, Johannes; Lisha, Nadra E.; Ling, Pamela M.

2016-01-01

Purpose Use of other tobacco products (smokeless tobacco, hookah, cigarillo, e-cigarettes) is increasing, particularly among young adults, and there are few regulations on marketing for these products. We examined the associations between tobacco marketing receptivity and other tobacco product (OTP) use among young adult bar patrons (aged 18-26 years). Methods Time-location sampling was used to collect cross-sectional surveys from 7,540 young adult bar patrons from January 2012 through March of 2014. Multivariable logistic regression analyses in 2015 examined if tobacco marketing receptivity was associated (1) with current (past 30 day) OTP use controlling for demographic factors, and (2) with dual/poly use among current cigarette smokers (n=3,045), controlling for demographics and nicotine dependence. Results Among the entire sample of young adult bar patrons (Mage=23.7, SD=1.8; 48.1% female), marketing receptivity was consistently associated with current use of all OTP including smokeless tobacco (adjusted odds ratio [AOR]= 2.49, 95% confidence interval [CI] 1.90-3.27, p<.001), hookah (AOR=1.97, 95% CI 1.58-2.43, p<.001), cigarillos/cigars (AOR=3.00, 95% CI 2.21-4.08, p<.001), electronic cigarettes (AOR=2.43, 95% CI 1.93-3.04, p<.001), and multiple tobacco products (AOR=2.93, 95% CI 2.45-3.51, p<.001). Among current smokers, marketing receptivity was significantly associated with use of smokeless tobacco (AOR=1.44, 95% CI 1.05-1.98, p<.05), cigarillos/cigars (AOR=1.81, 95% CI 1.22-2.70, p<.01), and multiple tobacco products (AOR=1.58, 95% CI 1.27-1.97, p<.001). Conclusions OTP use is common among young adult bar patrons and it is associated with tobacco marketing receptivity. Efforts to limit tobacco marketing should address OTP in addition to cigarettes. PMID:27707516

Short-term hunger intensity changes following ingestion of a meal replacement bar for weight control.

PubMed

Rothacker, Dana Q; Watemberg, Salo

2004-05-01

Meal replacement products for weight loss are popular and safe for most unsupervised consumers desiring to lose weight. Previously we reported that the thickness of meal replacement diet shakes had a direct and significant effect on hunger intensity during the first 2 h and that hunger intensity scores for liquid meal replacements were significantly below baseline for 3 h following consumption (Mattes & Rothacker, 2001) This study uses the same protocol to investigate meal replacement bars designed for overweight consumers. Subjects were prescreened to include only those that normally ate breakfast and liked chocolate. The bar used in this study contained 250 calories (about 30 more than most liquid diet shakes), 4 g dietary fiber, 14 g protein and 8 g fat. Subjects were instructed to consume the entire bar with a glass of water following an overnight fast when they would normally consume their first meal of the day and to assess their hunger on a 1 (not hungry at all) to 9 (as hungry as I have ever felt) scale before consumption, immediately after and hourly for 6 h (only on typical weekdays). Similar assessments were made for the perception of stomach fullness (1=empty, 9=extremely full), strength of the desire to eat (1=no desire, 9=extremely strong) and thirst (1=not at all thirsty, 9=extremely thirsty). One-hundred and eight subjects (23 male and 85 female) completed the study. No gender satiety differences were found. Hunger ratings and desire to eat remained significantly below baseline for 5 h following consumption. Stomach fullness scores were significantly above baseline for 5 h. Thirst scores were significantly below baseline for 3 h. In conclusion, although the meal replacement diet bars contained only 30 additional calories than liquids, they provided an additional 2 h of hunger suppression from baseline that may have an impact on overall weightloss success. These results support superior short-term hunger control with solid meal replacements.

The New BaBar Data Reconstruction Control System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ceseracciu, Antonio

2003-06-02

The BaBar experiment is characterized by extremely high luminosity, a complex detector, and a huge data volume, with increasing requirements each year. To fulfill these requirements a new control system has been designed and developed for the offline data reconstruction system. The new control system described in this paper provides the performance and flexibility needed to manage a large number of small computing farms, and takes full benefit of OO design. The infrastructure is well isolated from the processing layer, it is generic and flexible, based on a light framework providing message passing and cooperative multitasking. The system is activelymore » distributed, enforces the separation between different processing tiers by using different naming domains, and glues them together by dedicated brokers. It provides a powerful Finite State Machine framework to describe custom processing models in a simple regular language. This paper describes this new control system, currently in use at SLAC and Padova on {approx}450 CPUs organized in 12 farms.« less

The BaBar Data Reconstruction Control System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ceseracciu, A

2005-04-20

The BaBar experiment is characterized by extremely high luminosity and very large volume of data produced and stored, with increasing computing requirements each year. To fulfill these requirements a Control System has been designed and developed for the offline distributed data reconstruction system. The control system described in this paper provides the performance and flexibility needed to manage a large number of small computing farms, and takes full benefit of OO design. The infrastructure is well isolated from the processing layer, it is generic and flexible, based on a light framework providing message passing and cooperative multitasking. The system ismore » distributed in a hierarchical way: the top-level system is organized in farms, farms in services, and services in subservices or code modules. It provides a powerful Finite State Machine framework to describe custom processing models in a simple regular language. This paper describes the design and evolution of this control system, currently in use at SLAC and Padova on {approx}450 CPUs organized in 9 farms.« less

The BaBar Data Reconstruction Control System

NASA Astrophysics Data System (ADS)

Ceseracciu, A.; Piemontese, M.; Tehrani, F. S.; Pulliam, T. M.; Galeazzi, F.

2005-08-01

The BaBar experiment is characterized by extremely high luminosity and very large volume of data produced and stored, with increasing computing requirements each year. To fulfill these requirements a control system has been designed and developed for the offline distributed data reconstruction system. The control system described in this paper provides the performance and flexibility needed to manage a large number of small computing farms, and takes full benefit of object oriented (OO) design. The infrastructure is well isolated from the processing layer, it is generic and flexible, based on a light framework providing message passing and cooperative multitasking. The system is distributed in a hierarchical way: the top-level system is organized in farms, farms in services, and services in subservices or code modules. It provides a powerful finite state machine framework to describe custom processing models in a simple regular language. This paper describes the design and evolution of this control system, currently in use at SLAC and Padova on /spl sim/450 CPUs organized in nine farms.

A General and Mild Approach to Controllable Preparation of Manganese-Based Micro- and Nanostructured Bars for High Performance Lithium-Ion Batteries.

PubMed

Ma, Guo; Li, Sheng; Zhang, Weixin; Yang, Zeheng; Liu, Shulin; Fan, Xiaoming; Chen, Fei; Tian, Yuan; Zhang, Weibo; Yang, Shihe; Li, Mei

2016-03-07

One-dimensional (1D) micro- and nanostructured electrode materials with controllable phase and composition are appealing materials for use in lithium-ion batteries with high energy and power densities, but they are challenging to prepare. Herein, a novel ethanol-water mediated co-precipitation method by a chimie douce route (synthesis conducted under mild conditions) has been exploited to selectively prepare an extensive series of manganese-based electrode materials, manifesting the considerable generalizability and efficacy of the method. Moreover, by simply tuning the mixed solvent and reagents, transition metal oxide bars with differing aspect ratios and compositions were prepared with an unprecedented uniformity. Application prospects are demonstrated by Li-rich 0.5 Li2 MnO3 ⋅0.5 LiNi1/3 Co1/3 Mn1/3 O2 bars, which demonstrate excellent reversible capacity and rate capability thanks to the steerable nature of the synthesis and material quality. This work opens a new route to 1D micro- and nanostructured materials by customizing the precipitating solvent to orchestrate the crystallization process. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Consumption of a calcium and vitamin D-fortified food product does not affect iron status during initial military training: a randomised, double-blind, placebo-controlled trial.

PubMed

Hennigar, Stephen R; Gaffney-Stomberg, Erin; Lutz, Laura J; Cable, Sonya J; Pasiakos, Stefan M; Young, Andrew J; McClung, James P

2016-02-28

Ca/vitamin D supplementation maintains bone health and decreases stress fracture risk during initial military training (IMT); however, there is evidence that Ca may negatively affect the absorption of other critical micronutrients, particularly Fe. The objective of this randomised, double-blind, placebo-controlled trial was to determine whether providing 2000 mg/d Ca and 25 µg/d vitamin D in a fortified food product during 9 weeks of military training affects Fe status in young adults. Male (n 98) and female (n 54) volunteers enrolled in US Army basic combat training (BCT) were randomised to receive a snack bar with Ca/vitamin D (n 75) or placebo (snack bar without Ca/vitamin D; n 77) and were instructed to consume 2 snack bars/d between meals throughout the training course. Circulating ionised Ca was higher (P0·05) in markers of Fe status between placebo and Ca/vitamin D groups. Collectively, these data indicate that Ca/vitamin D supplementation through the use of a fortified food product consumed between meals does not affect Fe status during IMT.

A time-based front-end ASIC for the silicon micro strip sensors of the bar PANDA Micro Vertex Detector

NASA Astrophysics Data System (ADS)

Di Pietro, V.; Brinkmann, K.-Th.; Riccardi, A.; Ritman, J.; Rivetti, A.; Rolo, M. D.; Stockmanns, T.; Zambanini, A.

2016-03-01

The bar PANDA (Antiproton Annihilation at Darmstadt) experiment foresees many detectors for tracking, particle identification and calorimetry. Among them, the innermost is the MVD (Micro Vertex Detector) responsible for a precise tracking and the reconstruction of secondary vertices. This detector will be built from both hybrid pixel (two inner barrels and six forward disks) and double-sided micro strip (two outer barrels and outer rim of the last two disks) silicon sensors. A time-based approach has been chosen for the readout ASIC of the strip sensors. The PASTA (bar PANDA Strip ASIC) chip aims at high resolution time-stamping and charge information through the Time over Threshold (ToT) technique. It benefits from a Time to Digital Converter (TDC) allowing a time bin width down to 50 ps. The analog front-end was designed to serve both n-type and p-type strips and the performed simulations show remarkable performances in terms of linearity and electronic noise. The TDC consists of an analog interpolator, a digital local controller, and a digital global controller as the common back-end for all of the 64 channels.

Workplace exposure to secondhand smoke among non-smoking hospitality employees.

PubMed

Lawhorn, Nikki A; Lirette, David K; Klink, Jenna L; Hu, Chih-Yang; Contreras, Cassandra; Ajori Bryant, Ty-Runet Pinkney; Brown, Lisanne F; Diaz, James H

2013-02-01

This article examines salivary cotinine concentrations to characterize secondhand smoke (SHS) exposure among non-smoking hospitality employees (bar and casino employees and musicians who perform in bars) who are exposed to SHS in the workplace. A pre-post test study design was implemented to assess SHS exposure in the workplace. The convenience sample of 41 non-smoking hospitality employees included 10 controls (non-smoking hospitality employees not exposed to SHS in the workplace). The findings demonstrate that post-shift saliva cotinine levels of hospitality employees who are exposed to SHS in the workplace are significantly higher than controls who work in smoke-free venues. Findings also suggested a statistically significant increase between pre- and post-shift saliva cotinine levels of hospitality employees who are exposed in the workplace. No statistically significant difference was noted across labor categories, suggesting that all exposed employees are at increased risk. The study results indicate that non-smoking hospitality employees exposed to SHS in the workplace have significantly higher cotinine concentration levels compared with their counterparts who work in smoke-free venues. Findings from other studies suggest that these increased cotinine levels are harmful to health. Given the potential impact on the health of exposed employees, this study further supports the efforts of tobacco prevention and control programs in advocating for comprehensive smoke-free air policies to protect bar and casino employees.

Establishment area and biogeomorphic feedback window of three pioneer riparian Salicaceae species within a dynamic riparian corridor (Allier River, France)

NASA Astrophysics Data System (ADS)

Hortobágyi, Borbála; Corenblit, Dov; Steiger, Johannes; Peiry, Jean-Luc

2017-04-01

Within riparian corridors, biotic-abiotic feedback mechanisms occur between woody vegetation which is highly influenced by hydrogeomorphic constraints (e.g. sediment transport and deposition, shear stress, hydrological variability), fluvial landforms and morphodynamics, which in turn are modulated by established vegetation. During field investigations in spring 2015 we analysed on 16 alluvial bars (e.g. point and lateral bars) within the dynamic riparian corridor of the Allier River, France, the aptitude of three pioneer riparian Salicaceae tree species (Populus nigra L., Salix purpurea L. and Salix alba L.) to establish and to act as ecosystem engineers by trapping sediment and constructing fluvial landforms. Our aim was to empirically identify the preferential establishment area (EA; i.e. the local areas where species establish) and the preferential biogeomorphic feedback window (BFW; i.e. where and to what extent the species affect geomorphology) of these three species on alluvial bars within a river reach of a length of 20 km. Our results show that the EA and BFW of all three species significantly varied along the longitudinal, i.e. upstream-downstream exposure on the alluvial bars, and the transverse gradient, i.e. main channel-floodplain gradient of hydrological connectivity. In the current context of the Allier River it appeared that P. nigra, which is the most abundant species, acts as the main engineer species affecting landform dynamics at the bar scale; S. purpurea establishes and acts as an ecosystem engineer in the locations on the alluvial bars which are the most exposed to hydrosedimentary flow dynamics, while S. alba establishes on the bar tail in the vicinity of secondary channels and affects geomorphology in mixed patches with P. nigra. Thus, our study underlines the role of functional trait diversity of riparian engineer species in controlling the extent of fluvial landform construction along geomorphic gradients within riparian corridors exposed to frequent hydrogeomorphic disturbances.

Niche construction within riparian corridors. Part I: Exploring biogeomorphic feedback windows of three pioneer riparian species (Allier River, France)

NASA Astrophysics Data System (ADS)

Hortobágyi, Borbála; Corenblit, Dov; Steiger, Johannes; Peiry, Jean-Luc

2018-03-01

Within riparian corridors, biotic-abiotic feedback mechanisms occur between woody vegetation strongly influenced by hydrogeomorphic constraints (e.g., sediment transport and deposition, shear stress, hydrological variability), fluvial landforms, and morphodynamics, which in turn are modulated by the established vegetation. During field investigations in spring 2015, we studied 16 alluvial bars (e.g., point and lateral bars) within the dynamic riparian corridor of the Allier River (France) to assess the aptitude of three pioneer riparian Salicaceae species (Populus nigra L., Salix purpurea L., and Salix alba L.) to establish and act as ecosystem engineers by trapping sediment and constructing fluvial landforms. Our aim is to empirically identify the preferential establishment area (EA; i.e., the local areas where species become established) and the preferential biogeomorphic feedback window (BFW; i.e., where and to what extent the species and geomorphology interact) of these three species on alluvial bars within a 20-km-long river reach. Our results show that the EA and BFW of all three species vary significantly along the longitudinal profile, i.e., upstream-downstream exposure on the alluvial bars, as well as transversally, i.e., the main hydrological connectivity gradient from the river channel toward the floodplain. In the present-day context of the Allier River, P. nigra is the most abundant species, appearing to act as the main engineer species affecting landform dynamics at the bar scale; S. purpurea is established and acts as an ecosystem engineer at locations on alluvial bars that are most exposed to hydrosedimentary flow dynamics, while S. alba is established on the bar tail close to secondary channels and affects the geomorphology in mixed patches along with P. nigra. Our study highlights the role of functional trait diversity of riparian engineer species in controlling the extent of fluvial landform construction along geomorphic gradients within riparian corridors exposed to frequent hydrogeomorphic disturbances.

A Handheld Point-of-Care Genomic Diagnostic System

PubMed Central

Myers, Frank B.; Henrikson, Richard H.; Bone, Jennifer; Lee, Luke P.

2013-01-01

The rapid detection and identification of infectious disease pathogens is a critical need for healthcare in both developed and developing countries. As we gain more insight into the genomic basis of pathogen infectivity and drug resistance, point-of-care nucleic acid testing will likely become an important tool for global health. In this paper, we present an inexpensive, handheld, battery-powered instrument designed to enable pathogen genotyping in the developing world. Our Microfluidic Biomolecular Amplification Reader (µBAR) represents the convergence of molecular biology, microfluidics, optics, and electronics technology. The µBAR is capable of carrying out isothermal nucleic acid amplification assays with real-time fluorescence readout at a fraction of the cost of conventional benchtop thermocyclers. Additionally, the µBAR features cell phone data connectivity and GPS sample geotagging which can enable epidemiological surveying and remote healthcare delivery. The µBAR controls assay temperature through an integrated resistive heater and monitors real-time fluorescence signals from 60 individual reaction chambers using LEDs and phototransistors. Assays are carried out on PDMS disposable microfluidic cartridges which require no external power for sample loading. We characterize the fluorescence detection limits, heater uniformity, and battery life of the instrument. As a proof-of-principle, we demonstrate the detection of the HIV-1 integrase gene with the µBAR using the Loop-Mediated Isothermal Amplification (LAMP) assay. Although we focus on the detection of purified DNA here, LAMP has previously been demonstrated with a range of clinical samples, and our eventual goal is to develop a microfluidic device which includes on-chip sample preparation from raw samples. The µBAR is based entirely around open source hardware and software, and in the accompanying online supplement we present a full set of schematics, bill of materials, PCB layouts, CAD drawings, and source code for the µBAR instrument with the goal of spurring further innovation toward low-cost genetic diagnostics. PMID:23936402

Purification, crystallization and preliminary X-ray analysis of the inverse F-BAR domain of the human srGAP2 protein.

PubMed

Wang, Hongpeng; Zhang, Yan; Zhang, Zhenyi; Jin, Wei Lin; Wu, Geng

2014-01-01

Bin-Amphiphysin-Rvs (BAR) domain proteins play essential roles in diverse cellular processes by inducing membrane invaginations or membrane protrusions. Among the BAR superfamily, the `classical' BAR and Fes/CIP4 homology BAR (F-BAR) subfamilies of proteins usually promote membrane invaginations, whereas the inverse BAR (I-BAR) subfamily generally incur membrane protrusions. Despite possessing an N-terminal F-BAR domain, the srGAP2 protein regulates neurite outgrowth and neuronal migration by causing membrane protrusions reminiscent of the activity of I-BAR domain proteins. In this study, the inverse F-BAR (IF-BAR) domain of human srGAP2 was overexpressed, purified and crystallized. The crystals of the srGAP2 IF-BAR domain protein diffracted to 3.50 Å resolution and belonged to space group P2(1). These results will facilitate further structural determination of the srGAP2 IF-BAR domain and the ultimate elucidation of its peculiar behaviour of inducing membrane protrusions rather than membrane invaginations.

Special Workshop: Kolsky/Split Hopkinson Pressure Bar Testing of Ceramics

DTIC Science & Technology

2006-09-01

merit) control armor performance and how these properties are controlled/ influenced by intrinsic (crystal structure, phase transitions, and single...reproducibility uncertainties (estimates of precision) could be quantified and also identify key parameters that should be controlled in SHPB/Kolsky testing...control performance? Are there figures of merit? How are the mechanical properties influenced by intrinsic and extrinsic material characteristics

Triple bar, high efficiency mechanical sealer

DOEpatents

Pak, Donald J.; Hawkins, Samantha A.; Young, John E.

2013-03-19

A clamp with a bottom clamp bar that has a planar upper surface is provided. The clamp may also include a top clamp bar connected to the bottom clamp bar, and a pressure distribution bar between the top clamp bar and the bottom clamp bar. The pressure distribution bar may have a planar lower surface in facing relation to the upper surface of the bottom clamp bar. An object is capable of being disposed in a clamping region between the upper surface and the lower surface. The width of the planar lower surface may be less than the width of the upper surface within the clamping region. Also, the pressure distribution bar may be capable of being urged away from the top clamp bar and towards the bottom clamp bar.

THE MASS PROFILE AND SHAPE OF BARS IN THE SPITZER SURVEY OF STELLAR STRUCTURE IN GALAXIES (S{sup 4}G): SEARCH FOR AN AGE INDICATOR FOR BARS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, Taehyun; Lee, Myung Gyoon; Sheth, Kartik

2015-01-20

We have measured the radial light profiles and global shapes of bars using two-dimensional 3.6 μm image decompositions for 144 face-on barred galaxies from the Spitzer Survey of Stellar Structure in Galaxies. The bar surface brightness profile is correlated with the stellar mass and bulge-to-total (B/T) ratio of their host galaxies. Bars in massive and bulge-dominated galaxies (B/T > 0.2) show a flat profile, while bars in less massive, disk-dominated galaxies (B/T ∼ 0) show an exponential, disk-like profile with a wider spread in the radial profile than in the bulge-dominated galaxies. The global two-dimensional shapes of bars, however, are rectangular/boxy, independentmore » of the bulge or disk properties. We speculate that because bars are formed out of disks, bars initially have an exponential (disk-like) profile that evolves over time, trapping more disk stars to boxy bar orbits. This leads bars to become stronger and have flatter profiles. The narrow spread of bar radial profiles in more massive disks suggests that these bars formed earlier (z > 1), while the disk-like profiles and a larger spread in the radial profile in less massive systems imply a later and more gradual evolution, consistent with the cosmological evolution of bars inferred from observational studies. Therefore, we expect that the flatness of the bar profile can be used as a dynamical age indicator of the bar to measure the time elapsed since the bar formation. We argue that cosmic gas accretion is required to explain our results on bar profile and the presence of gas within the bar region.« less

Project ARM: alcohol risk management to prevent sales to underage and intoxicated patrons.

PubMed

Toomey, T L; Wagenaar, A C; Gehan, J P; Kilian, G; Murray, D M; Perry, C L

2001-04-01

Clear policies and expectations are key to increasing responsible service of alcohol in licensed establishments. Few training programs focus exclusively on owners and managers of alcohol establishments to reduce the risk of alcohol service. Project ARM: Alcohol Risk Management is a one-on-one consultation program for owners and managers. Participants received information on risk level, policies to prevent illegal sales, legal issues, and staff communication. This nonrandomized demonstration project was implemented in five diverse bars. Two waves of underage and pseudo-intoxicated purchase attempts were conducted pre- and postintervention in the five intervention bars and nine matched control bars. Underage sales decreased by 11.5%, and sales to pseudo-intoxicated buyers decreased by 46%. Results were in the hypothesized direction but not statistically significant. A one-on-one, outlet-specific training program for owners and managers is a promising way to reduce illegal alcohol sales, particularly to obviously intoxicated individuals.

Challenges in Special Steel Making

NASA Astrophysics Data System (ADS)

Balachandran, G.

2018-02-01

Special bar quality [SBQ] is a long steel product where an assured quality is delivered by the steel mill to its customer. The bars have enhanced tolerance to higher stress application and it is demanded for specialised component making. The SBQ bars are sought for component making processing units such as closed die hot forging, hot extrusion, cold forging, machining, heat treatment, welding operations. The final component quality of the secondary processing units depends on the quality maintained at the steel maker end along with quality maintained at the fabricator end. Thus, quality control is ensured at every unit process stages. The various market segments catered to by SBQ steel segment is ever growing and is reviewed. Steel mills need adequate infrastructure and technological capability to make these higher quality steels. Some of the critical stages of processing SBQ and the critical quality maintenance parameters at the steel mill in the manufacture has been brought out.

Membrane tension controls the assembly of curvature-generating proteins

PubMed Central

Simunovic, Mijo; Voth, Gregory A.

2015-01-01

Proteins containing a Bin/Amphiphysin/Rvs (BAR) domain regulate membrane curvature in the cell. Recent simulations have revealed that BAR proteins assemble into linear aggregates, strongly affecting membrane curvature and its in-plane stress profile. Here, we explore the opposite question: do mechanical properties of the membrane impact protein association? By using coarse-grained molecular dynamics simulations, we show that increased surface tension significantly impacts the dynamics of protein assembly. While tensionless membranes promote a rapid formation of long-living linear aggregates of N-BAR proteins, increase in tension alters the geometry of protein association. At high tension, protein interactions are strongly inhibited. Increasing surface density of proteins leads to a wider range of protein association geometries, promoting the formation of meshes, which can be broken apart with membrane tension. Our work indicates that surface tension may play a key role in recruiting proteins to membrane-remodelling sites in the cell. PMID:26008710

An introduction to shuttle/LDEF retrieval operations: The R-bar approach option. [orbital mechanics and braking schedule

NASA Technical Reports Server (NTRS)

Hall, W. M.

1978-01-01

Simulated orbiter direct approaches during long duration exposure facility (LDEF) retrieval operations reveal that the resultant orbiter jet plume fields can significantly disturb LDEF. An alternate approach technique which utilizes orbital mechanics forces in lieu of jets to brake the final orbiter/LDEF relative motion during the final approach, is described. Topics discussed include: rendezvous operations from the terminal phase initiation burn through braking at some standoff distance from LDEF, pilot and copilot activities, the cockpit instrumentation employed, and a convenient coordinate frame for studying the relative motion between two orbiting bodies. The basic equations of motion for operating on the LDEF radius vector are introduced. Practical considerations of implementing an R-bar approach, namely, orbiter/LDEF relative state uncertainties and orbiter control system limitations are explored. A possible R-bar approach strategy is developed and demonstrated.

Anatomy of the Photodissociation Region in the Orion Bar

NASA Technical Reports Server (NTRS)

Tielens, A. G. G. M.; Meixner, M. M.; vanderWerf, P. P.; Bregman, J.; Tauber, J. A.; Stutzki, J.; Rank, D.

1993-01-01

Much of the interstellar gas resides in photodissociation regions whose chemistry and energy balance is controlled by the flux of far-ultraviolet radiation upon them. These photons can ionize and dissociate molecules and heat the gas through the photoelectric effect working on dust grains. These regions have been extensively modeled theoretically, but detailed observational studies are few. Mapping of the prominent Orion Bar photo-dissociation region at wavelengths corresponding to the carbon-hydrogen stretching mode of polycyclic aromatic hydrocarbons, the 1-0 S(l) line of molecular hydrogen, and the J = 1-0 rotational line of carbon monoxide allows the penetration of the far-ultraviolet radiation into the cloud to be traced. The results strongly support the theoretical models and show conclusively that the incident far-ultraviolet radiation field, not shocks as has sometimes been proposed, is responsible for the emission in the Orion Bar.

Mechanisms controlling the complete accretionary beach state sequence

NASA Astrophysics Data System (ADS)

Dubarbier, Benjamin; Castelle, Bruno; Ruessink, Gerben; Marieu, Vincent

2017-06-01

Accretionary downstate beach sequence is a key element of observed nearshore morphological variability along sandy coasts. We present and analyze the first numerical simulation of such a sequence using a process-based morphodynamic model that solves the coupling between waves, depth-integrated currents, and sediment transport. The simulation evolves from an alongshore uniform barred beach (storm profile) to an almost featureless shore-welded terrace (summer profile) through the highly alongshore variable detached crescentic bar and transverse bar/rip system states. A global analysis of the full sequence allows determining the varying contributions of the different hydro-sedimentary processes. Sediment transport driven by orbital velocity skewness is critical to the overall onshore sandbar migration, while gravitational downslope sediment transport acts as a damping term inhibiting further channel growth enforced by rip flow circulation. Accurate morphological diffusivity and inclusion of orbital velocity skewness opens new perspectives in terms of morphodynamic modeling of real beaches.

A nutrient-dense, high-fiber, fruit-based supplement bar increases HDL cholesterol, particularly large HDL, lowers homocysteine, and raises glutathione in a 2-wk trial

PubMed Central

Mietus-Snyder, Michele L.; Shigenaga, Mark K.; Suh, Jung H.; Shenvi, Swapna V.; Lal, Ashutosh; McHugh, Tara; Olson, Don; Lilienstein, Joshua; Krauss, Ronald M.; Gildengoren, Ginny; McCann, Joyce C.; Ames, Bruce N.

2012-01-01

Dietary intake modulates disease risk, but little is known how components within food mixtures affect pathophysiology. A low-calorie, high-fiber, fruit-based nutrient-dense bar of defined composition (e.g., vitamins and minerals, fruit polyphenolics, β-glucan, docosahexaenoic acid) appropriate for deconstruction and mechanistic studies is described and evaluated in a pilot trial. The bar was developed in collaboration with the U.S. Department of Agriculture. Changes in cardiovascular disease and diabetes risk biomarkers were measured after 2 wk twice-daily consumption of the bar, and compared against baseline controls in 25 healthy adults. Plasma HDL-cholesterol (HDL-c) increased 6.2% (P=0.001), due primarily to a 28% increase in large HDL (HDL-L; P<0.0001). Total plasma homocysteine (Hcy) decreased 19% (P=0.017), and glutathione (GSH) increased 20% (P=0.011). The changes in HDL and Hcy are in the direction associated with decreased risk of cardiovascular disease and cognitive decline; increased GSH reflects improved antioxidant defense. Changes in biomarkers linked to insulin resistance and inflammation were not observed. A defined food-based supplement can, within 2 wk, positively impact metabolic biomarkers linked to disease risk. These results lay the groundwork for mechanistic/deconstruction experiments to identify critical bar components and putative synergistic combinations responsible for observed effects.—Mietus-Snyder, M. L., Shigenaga, M. K., Suh, J. H., Shenvi, S. V., Lal, A., McHugh, T., Olson, D., Lilienstein, J., Krauss, R. M., Gildengoren, G., McCann, J. C., Ames, B. N. A nutrient-dense, high-fiber, fruit-based supplement bar increases HDL cholesterol, particularly large HDL, lowers homocysteine, and raises glutathione in a 2-wk trial. PMID:22549511

IMF-screws or arch bars as conservative treatment for mandibular condyle fractures: Quality of life aspects.

PubMed

van den Bergh, B; de Mol van Otterloo, J J; van der Ploeg, T; Tuinzing, D B; Forouzanfar, T

2015-09-01

Arch bars as treatment for a fractured mandibular condyle are inconvenient to patients and lead to lowered quality of life (QOL). To overcome these inconveniences, IMF-screws (IMFS) to facilitate intermaxillary fixation during surgery have been developed. The purpose of the present study is to investigate and compare QOL for patients treated for a fractured mandibular condyle with either IMFS or arch bars. This research trial was conducted from 2010 to 2014 as part of an earlier prospective, multicenter, randomized clinical trial in which the use of IMFS was compared to the use of arch bars in the treatment of mandibular condylar fractures. In total, 50 patients were included: 30 (60%) male patients and 20 (40%) female patients (mean age: 31.8 years, standard deviation [SD] = 13.9 years, range = 18-64 years). A total of 24 (48%) patients were allocated in the IMFS group, and 26 (52%) patients were assigned to the arch-bars control group. Significant results were observed in the subscales social isolation, possibility to eat and vary diet, influence on sleep, and satisfaction with the given treatment, all in favour of IMFS. In conclusion, using IMFS as a method for conservative treatment of condylar fractures led to a higher QOL during the 6-week period of fracture healing. In comparison to arch bars, patients treated with IMFS experienced less social isolation, had fewer problems with eating, and express the feeling they are able to continue their normal diet. Furthermore it seems that the use of IMFS has a lower negative impact on social and financial aspects of the patient. Copyright © 2015 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Both alpha(1A)- and alpha(1B)-adrenergic receptors crosstalk to down regulate beta(1)-ARs in mouse heart: coupling to differential PTX-sensitive pathways.

PubMed

Rorabaugh, Boyd R; Gaivin, Robert J; Papay, Robert S; Shi, Ting; Simpson, Paul C; Perez, Dianne M

2005-11-01

Adrenergic receptors (ARs) play an important role in the regulation of cardiac function. Cardiac inotropy is primarily regulated by beta(1)-ARs. However, alpha(1)-ARs may play an important role in inotropy during heart failure. Previous work has suggested that the alpha(1B)-AR modulates beta(1)-AR function in the heart. The potential role of the alpha(1A)-AR has not been previously studied. We used transgenic mice that express constitutively active mutant (CAM) forms of the alpha(1A)-AR or alpha(1B)-AR regulated by their endogenous promoters. Expression of the CAM alpha(1A)-AR or CAM alpha(1B)-AR had no effect on basal cardiac function (developed pressure, +dP/dT, -dP/dT, heart rate, flow rate). However, both alpha(1)-AR subtypes significantly decreased isoproterenol-stimulated +dP/dT. Pertussis toxin had no effect on +dP/dT in CAM alpha(1A)-AR hearts but restored +dP/dT to non-transgenic values in CAM alpha(1B)-AR hearts. Radioligand binding indicated a selective decrease in the density of beta(1)-ARs in both CAM mice. However, G-proteins, cAMP, or the percentage of high and low affinity states were unchanged in either transgenic compared with control. These data demonstrate that CAM alpha(1A)- and alpha(1B)-ARs both down regulate beta(1)-AR-mediated inotropy in the mouse heart. However, alpha(1)-AR subtypes are coupled to different beta-AR mediated signaling pathways with the alpha(1B)-AR being pertussis toxin sensitive.

Body temperature depression and peripheral heat loss accompany the metabolic and ventilatory responses to hypoxia in low and high altitude birds.

PubMed

Scott, Graham R; Cadena, Viviana; Tattersall, Glenn J; Milsom, William K

2008-04-01

The objectives of this study were to compare the thermoregulatory, metabolic and ventilatory responses to hypoxia of the high altitude bar-headed goose with low altitude waterfowl. All birds were found to reduce body temperature (T(b)) during hypoxia, by up to 1-1.5 degrees C in severe hypoxia. During prolonged hypoxia, T(b) stabilized at a new lower temperature. A regulated increase in heat loss contributed to T(b) depression as reflected by increases in bill surface temperatures (up to 5 degrees C) during hypoxia. Bill warming required peripheral chemoreceptor inputs, since vagotomy abolished this response to hypoxia. T(b) depression could still occur without bill warming, however, because vagotomized birds reduced T(b) as much as intact birds. Compared to both greylag geese and pekin ducks, bar-headed geese required more severe hypoxia to initiate T(b) depression and heat loss from the bill. However, when T(b) depression or bill warming were expressed relative to arterial O(2) concentration (rather than inspired O(2)) all species were similar; this suggests that enhanced O(2) loading, rather than differences in thermoregulatory control centres, reduces T(b) depression during hypoxia in bar-headed geese. Correspondingly, bar-headed geese maintained higher rates of metabolism during severe hypoxia (7% inspired O(2)), but this was only partly due to differences in T(b). Time domains of the hypoxic ventilatory response also appeared to differ between bar-headed geese and low altitude species. Overall, our results suggest that birds can adjust peripheral heat dissipation to facilitate T(b) depression during hypoxia, and that bar-headed geese minimize T(b) and metabolic depression as a result of evolutionary adaptations that enhance O(2) transport.

Spinophilin Is Indispensable for the α2B Adrenergic Receptor-Elicited Hypertensive Response.

PubMed

Che, Pulin; Chen, Yunjia; Lu, Roujian; Peng, Ning; Gannon, Mary; Wyss, J Michael; Jiao, Kai; Wang, Qin

2015-01-01

The α2 adrenergic receptor (AR) subtypes are important for blood pressure control. When activated, the α2A subtype elicits a hypotensive response whereas the α2B subtype mediates a hypertensive effect that counteracts the hypotensive response by the α2A subtype. We have previously shown that spinophilin attenuates the α2AAR-dependent hypotensive response; in spinophilin null mice, this response is highly potentiated. In this study, we demonstrate that spinophilin impedes arrestin-dependent phosphorylation and desensitization of the α2BAR subtype by competing against arrestin binding to this receptor subtype. The Del301-303 α2BAR, a human variation that shows impaired phosphorylation and desensitization and is linked to hypertension in certain populations, exhibits preferential interaction with spinophilin over arrestin. Furthermore, Del301-303 α2BAR-induced ERK signaling is quickly desensitized in cells without spinophilin expression, showing a profile similar to that induced by the wild type receptor in these cells. Together, these data suggest a critical role of spinophilin in sustaining α2BAR signaling. Consistent with this notion, our in vivo study reveals that the α2BAR-elicited hypertensive response is diminished in spinophilin deficient mice. In arrestin 3 deficient mice, where the receptor has a stronger binding to spinophilin, the same hypertensive response is enhanced. These data suggest that interaction with spinophilin is indispensable for the α2BAR to elicit the hypertensive response. This is opposite of the negative role of spinophilin in regulating α2AAR-mediated hypotensive response, suggesting that spinophilin regulation of these closely related receptor subtypes can result in distinct functional outcomes in vivo. Thus, spinophilin may represent a useful therapeutic target for treatment of hypertension.

Fear of movement modulates the feedforward motor control of the affected limb in complex regional pain syndrome (CRPS): A single-case study.

PubMed

Osumi, Michihiro; Sumitani, Masahiko; Otake, Yuko; Morioka, Shu

2018-01-01

Pain-related fear can exacerbate physical disability and pathological pain in complex regional pain syndrome (CRPS) patients. We conducted a kinematic analysis of grasping movements with a pediatric patient suffering from CRPS in an upper limb to investigate how pain-related fear affects motor control. Using a three-dimensional measurement system, we recorded the patient's movement while grasping three vertical bars of different diameters (thin, middle, thick) with the affected and intact hands. We analyzed the maximum grasp distance between the thumb and the index finger (MGD), the peak velocity of the grasp movement (PV), and the time required for the finger opening phase (TOP) and closing phase (TCP). Consequently, the MGD and PV of grasp movements in the affected hand were significantly smaller than those of the intact hand when grasping the middle and thick bars. This might reflect pain-related fear against visual information of the target size which evokes sensation of difficulty in opening fingers widely to grasp the middle and thick bars. Although MGD and PV increased with target size, the TOP was longer in the affected hand when grasping the thick bar. These findings indicate that pain-related fear impairs motor commands that are sent to the musculoskeletal system, subsequently disrupting executed movements and their sensory feedback. Using kinematic analysis, we objectively demonstrated that pain-related fear affects the process of sending motor commands towards the musculoskeletal system in the CRPS-affected hand, providing a possible explanatory model of pathological pain. Copyright © 2017 Elsevier Ltd. All rights reserved.

A note on the chemistry of seawater in the range 350°-500°C

USGS Publications Warehouse

Bischoff, James L.; Rosenbauer, Robert J.

1983-01-01

The chemistry of seawater at conditions of 350° to 500°C, 220 to 1000 bars (22 to 100 MPa) is controlled by reactions involving magnesium hydroxide sulfate (MHSH) and anhydrite. During progressive heating from 350° to 500°C at 1000 bars (100 MPa), MHSH with a  ratio of 1.25 is formed via precipitation from solution and via reaction of solution with pre-existing anhydrite. During adiabatic expansion the MHSH extracts additional SO4 from seawater and converts to a stoichiometry in which . These reactions control and greatly change the concentrations of Ca, Mg, SO4 in solution and produce significant ionizable hydrogen, attaining 11.7 mmoles kg−1 at maximum conditions.

Variation of bar-press duration: where do new responses come from?

PubMed

Roberts, Seth; Gharib, Afshin

2006-06-01

Instrumental learning involves both variation and selection: variation of what the animal does, and selection by reward from among the variation. Four experiments with rats suggested a rule about how variation is controlled by recent events. Experiment 1 used the peak procedure. Measurements of bar-press durations showed a sharp increase in mean duration after the time that food was sometimes given. The increase was triggered by the omission of expected food. Our first explanation of the increase was that it was a frustration effect. Experiment 2 tested this explanation with a procedure in which the first response of a trial usually produced food, ending the trial. In Experiment 2, unlike Experiment 1, omission of expected food did not produce a large increase in bar-press duration, which cast doubt on the frustration explanation. Experiments 3 and 4 tested an alternative explanation: a decrease in expectation of reward increases variation. Both used two signals associated with different probabilities of reward. Bar presses were more variable in duration during the signal with the lower probability of reward, supporting this alternative. These experiments show how variation can be studied with ordinary equipment and responses.

Trace metal release after minimally-invasive repair of pectus excavatum

PubMed Central

Göen, Thomas; Krüger, Marcus; Ure, Benno M.; Petersen, Claus; Kübler, Joachim F.

2017-01-01

Background Several studies have shown a high incidence of metal allergy after minimally-invasive repair of pectus excavatum (MIRPE). We postulated that MIRPE is associated with a significant release of trace metal ions, possibly causing the allergic symptoms. Methods We evaluated the concentration with chromium, cobalt and nickel in blood, urine and tissue in patients prior to MIRPE and in patients who underwent an explantation of the stainless-steel bar(s) after three years. Results Our study group consisted of 20 patients (mean age 19 years) who had bar explantation and our control group included 20 patients (mean age 16 years) prior to MIRPE. At the time of bar removal we detected significantly elevated concentrations of chromium and nickel in the tissue compared to patients prior to the procedure (p<0,001). We also found a significant increase in the levels of chromium in urine and nickel in blood in patients three years post MIRPE (p<0,001). Four patients temporarily developed symptoms of metal allergy, all had elevated metal values in blood and urine at explantation. Conclusions Minimally-invasive repair of pectus excavatum can lead to a significant trace metal exposure. PMID:29023602

Effect of a viscous fiber-containing nutrition bar on satiety of patients with type 2 diabetes.

PubMed

Chow, Jomay; Choe, Yong S; Noss, Michael J; Robinson, Kay J; Dugle, Janis E; Acosta, Sonja H; Garleb, Keith A

2007-06-01

To assess the satiety-promoting effect of a novel viscous fiber-containing nutrition bar, overweight and obese adult subjects with type 2 diabetes (n=99) were randomized into a double blind, crossover study. They were fed a 300kcal lunch consisting of viscous fiber-containing nutrition bars (VF) or commercial nutrition control bars designed for people with diabetes (CH). VF resulted in a 27.1% increase in fullness (p<0.05), a 15.8% decrease in prospective consumption (p<0.001), and a 14.2% decrease in hunger (p<0.001) in the 120-240min post-lunch areas under the curve (AUC) compared to CH, but no differences were observed for nausea or thirst (p>0.05). Similar results were noted for 0-300min AUC values. VF were associated with greater frequencies and intensities of abdominal distention (p<0.001) and flatulence (p<0.001), and greater frequency of stools (p<0.001) compared to CH, but there were no differences in mean or maximum (loosest) stool consistency (p>0.05). Overall, these results suggest that VF could be a useful tool in weight management of type 2 diabetes.

BAR Proteins PSTPIP1/2 Regulate Podosome Dynamics and the Resorption Activity of Osteoclasts

PubMed Central

Sztacho, Martin; Segeletz, Sandra; Sanchez-Fernandez, Maria Arantzazu; Czupalla, Cornelia; Niehage, Christian; Hoflack, Bernard

2016-01-01

Bone resorption in vertebrates relies on the ability of osteoclasts to assemble F-actin-rich podosomes that condense into podosomal belts, forming sealing zones. Sealing zones segregate bone-facing ruffled membranes from other membrane domains, and disassemble when osteoclasts migrate to new areas. How podosome/sealing zone dynamics is regulated remains unknown. We illustrate the essential role of the membrane scaffolding F-BAR-Proline-Serine-Threonine Phosphatase Interacting Proteins (PSTPIP) 1 and 2 in this process. Whereas PSTPIP2 regulates podosome assembly, PSTPIP1 regulates their disassembly. PSTPIP1 recruits, through its F-BAR domain, the protein tyrosine phosphatase non-receptor type 6 (PTPN6) that de-phosphophorylates the phosphatidylinositol 5-phosphatases SHIP1/2 bound to the SH3 domain of PSTPIP1. Depletion of any component of this complex prevents sealing zone disassembly and increases osteoclast activity. Thus, our results illustrate the importance of BAR domain proteins in podosome structure and dynamics, and identify a new PSTPIP1/PTPN6/SHIP1/2-dependent negative feedback mechanism that counterbalances Src and PI(3,4,5)P3 signalling to control osteoclast cell polarity and activity during bone resorption. PMID:27760174

Membrane-Sculpting BAR Domains Generate Stable Lipid Microdomains

PubMed Central

Zhao, Hongxia; Michelot, Alphée; Koskela, Essi V.; Tkach, Vadym; Stamou, Dimitrios; Drubin, David G.; Lappalainen, Pekka

2014-01-01

SUMMARY Bin-Amphiphysin-Rvs (BAR) domain proteins are central regulators of many cellular processes involving membrane dynamics. BAR domains sculpt phosphoinositide-rich membranes to generate membrane protrusions or invaginations. Here, we report that, in addition to regulating membrane geometry, BAR domains can generate extremely stable lipid microdomains by “freezing” phosphoinositide dynamics. This is a general feature of BAR domains, because the yeast endocytic BAR and Fes/CIP4 homology BAR (F-BAR) domains, the inverse BAR domain of Pinkbar, and the eisosomal BAR protein Lsp1 induced phosphoinositide clustering and halted lipid diffusion, despite differences in mechanisms of membrane interactions. Lsp1 displays comparable low diffusion rates in vitro and in vivo, suggesting that BAR domain proteins also generate stable phosphoinositide microdomains in cells. These results uncover a conserved role for BAR superfamily proteins in regulating lipid dynamics within membranes. Stable microdomains induced by BAR domain scaffolds and specific lipids can generate phase boundaries and diffusion barriers, which may have profound impacts on diverse cellular processes. PMID:24055060

Complications with computer-aided designed/computer-assisted manufactured titanium and soldered gold bars for mandibular implant-overdentures: short-term observations.

PubMed

Katsoulis, Joannis; Wälchli, Julia; Kobel, Simone; Gholami, Hadi; Mericske-Stern, Regina

2015-01-01

Implant-overdentures supported by rigid bars provide stability in the edentulous atrophic mandible. However, fractures of solder joints and matrices, and loosening of screws and matrices were observed with soldered gold bars (G-bars). Computer-aided designed/computer-assisted manufactured (CAD/CAM) titanium bars (Ti-bars) may reduce technical complications due to enhanced material quality. To compare prosthetic-technical maintenance service of mandibular implant-overdentures supported by CAD/CAM Ti-bar and soldered G-bar. Edentulous patients were consecutively admitted for implant-prosthodontic treatment with a maxillary complete denture and a mandibular implant-overdenture connected to a rigid G-bar or Ti-bar. Maintenance service and problems with the implant-retention device complex and the prosthesis were recorded during minimally 3-4 years. Annual peri-implant crestal bone level changes (ΔBIC) were radiographically assessed. Data of 213 edentulous patients (mean age 68 ± 10 years), who had received a total of 477 tapered implants, were available. Ti-bar and G-bar comprised 101 and 112 patients with 231 and 246 implants, respectively. Ti-bar mostly exhibited distal bar extensions (96%) compared to 34% of G-bar (p < .001). Fracture rate of bars extensions (4.7% vs 14.8%, p < .001) and matrices (1% vs 13%, p < .001) was lower for Ti-bar. Matrices activation was required 2.4× less often in Ti-bar. ΔBIC remained stable for both groups. Implant overdentures supported by soldered gold bars or milled CAD/CAM Ti-bars are a successful treatment modality but require regular maintenance service. These short-term observations support the hypothesis that CAD/CAM Ti-bars reduce technical complications. Fracture location indicated that the titanium thickness around the screw-access hole should be increased. © 2013 Wiley Periodicals, Inc.

Scroll bar growth on the coastal Trinity River, TX, USA

NASA Astrophysics Data System (ADS)

Mason, J.; Hassenruck-Gudipati, H. J.; Mohrig, D. C.

2017-12-01

The processes leading to the formation and growth of scroll bars remain relatively mysterious despite how often they are referenced in fluvial literature. Their definition is descriptive; they are characterized as arcuate topographic highs present on the inner banks of channel bends on meandering rivers, landward of point bars. Often, they are used as proxies for previous positions of point bars. This assumption of a one-to-one correspondence between point bars and scroll bars should be reconsidered as 1) planform curvature for scroll bars is consistently smaller than the curvature for adjacent point bars, and 2) deposition on the scroll bar is typically distinct and disconnected from the adjacent point bar deposition. Results from time-lapse airborne lidar data as well as from trenches through five separate scroll bar - point bar pairings on the Trinity River in east TX, USA, will be discussed in relation to formative scroll bar processes and their connection to point bars. On the lidar difference map, scroll bar growth appears as a strip of increased deposition flanked on both the land- and channel-ward sides by areas with no or limited deposition. Trenches perpendicular to these scrolls typically show a base of dune-scale cross stratification interpreted to be associated with a previous position of the point bar. These dune sets are overlain by sets of climbing-ripple cross-strata that form the core of the modern scroll bar and preserve a record of multiple transport directions (away from, towards, and parallel to the channel). Preliminary Trinity River grain-size analyses show that the constructional scrolls are enriched in all grain sizes less than 250 microns in diameter, while point bars are enriched in all grain sizes above this cut off. Scroll bars are hypothesized to be akin to levees along the inner banks of channels-flow expansion caused by the presence of point bars induces deposition of suspended sediment that defines the positions of the scroll bars.

Analisys of pectoralis major tendon in weightlifting athletes using ultrasonography and elastography

PubMed Central

Pochini, Alberto de Castro; Ferretti, Mario; Kawakami, Eduardo Felipe Kin Ito; Fernandes, Artur da Rocha Corrêa; Yamada, Andre Fukunishi; de Oliveira, Gabriela Clemente; Cohen, Moisés; Andreoli, Carlos Vicente; Ejnisman, Benno

2015-01-01

ABSTRACT Objective To evaluate tendinopathy of the pectoralis major muscle in weightlifting athletes using ultrasound and elastography. Methods This study included 20 patients, 10 with rupture of the pectoralis major muscle and 10 control patients. We evaluated pectoralis major muscle contralateral tendon with ultrasonographic and elastography examinations. The ultrasonographic examinations were performed using a high-resolution B mode ultrasound device. The elastography evaluation was classified into three patterns: (A), if stiff (more than 50% area with blue staining); (B), if intermediate (more than 50% green); and (C), if softened (more than 50% red). Results Patients’ mean age was 33±5.3 years. The presence of tendinous injury measured by ultrasound had a significant different (p=0.0055), because 80% of cases had tendinous injury versus 10% in the Control Group. No significant differences were seen between groups related with change in elastography (p=0.1409). Conclusion Long-term bodybuilders had ultrasound image with more tendinous injury than those in Control Group. There was no statistical significance regarding change in tendon elasticity compared with Control Group. PMID:26761551

Interaction between a Mg17Al12 precipitate and { 10\\bar 12} < 10\\bar 12 > twin boundary in magnesium alloys

NASA Astrophysics Data System (ADS)

Li, B.; Mathaudhu, S. N.

Interactions between Mg17Al12 precipitates and { 10\\bar 12} < 10\\bar 1\\bar 1 > twin boundaries (TBs) in magnesium were studied by molecular dynamics simulations. The results obtained agree well with experimental observations in which precipitates can be entirely engulfed by { 10\\bar 12} < 10\\bar 1\\bar 1 > twins without being sheared. Structural analysis of the TBs in the atomic scale shows that the TBs are extremely incoherent during twin growth and highly deviate from the { 10\\bar 12} twinning plane as previously observed in a number of experiments. The simulation studies indicate that { 10\\bar 12} < 10\\bar 1\\bar 1 > twinning was accomplished solely by atomic shuffling that converts the parent lattice to the twin lattice without involving twinning dislocations, resulting in zero shear strain at the TBs.

[National epidemiological surveillance systems of mesothelioma cases].

PubMed

Ferrante, Pierpaolo; Binazzi, Alessandra; Branchi, Claudia; Marinaccio, Alessandro

2016-01-01

INTRODUZIONE: sebbene la relazione causale tra esposizione ad amianto e malattie neoplastiche sia ben nota, in molti Paesi il consumo del materiale è ancora rilevante e crescente. A causa della lunga latenza, nei Paesi dove è stato bandito (come in Italia) è oggi in corso un'epidemia di malattie correlate ad amianto. OBIETTIVI: descrivere i sistemi di sorveglianza dei mesoteliomi attivi nel mondo mediante un'analisi comparativa. è stata condotta una revisione bibliografica della letteratura disponibile sui sistemi di sorveglianza epidemiologica dei mesoteliomi attivi nel mondo, comparando metodi e risultati disponibili. RISULTATI: sistemi di ricerca dei casi incidenti e di analisi anamnestica dei soggetti ammalati sono attivi solo in Italia, Francia e Corea del Sud. I Paesi presso i quali sono attivi sistemi di rilevazione e controllo dei casi incidenti di mesotelioma sono quelli in cui vige il bando dell'amianto e che hanno sperimentato consumi rilevanti in passato. Non sono stati istituiti sistemi epidemiologici di sorveglianza in molti Paesi dove il consumo di amianto è ancora importante (inclusi Russia, Cina, India e Brasile). CONCLUSIONI: si conferma l'importanza dei sistemi di sorveglianza epidemiologica dei mesoteliomi per la sanità pubblica, il sostegno alle politiche di welfare e la prevenzione dei rischi. Lo sviluppo di progetti per tendere a una maggiore uniformità nei metodi di ricerca dei casi, di classificazione delle diagnosi e dell'esposizione e nelle tecniche di analisi dei dati potrebbe consentire una maggiore fruibilità dei dati aggregati. La disponibilità di dati internazionali confrontabili può essere di stimolo all'adozione di provvedimenti di bando internazionale.

[La combinazione di gemcitabina e oxaliplatino (GEMOX) nel trattamento del carcinoma pancreatico in fase avanzata di malattia: le notizie sulla mia morte sono state esagerate?

PubMed

Giuliani, Jacopo; Bonetti, Andrea

2017-12-01

Riassunto. L'analisi è stata condotta al fine di valutare l'effetto sia sulla sopravvivenza globale (OS) sia sulla sopravvivenza libera da progressione di malattia (PFS) della chemioterapia di combinazione in prima linea per il carcinoma pancreatico in fase avanzata di malattia. La presente analisi è limitata agli studi randomizzati controllati (RCT) di fase III. Successivamente è stata applicata la European Society for Medical Oncology Magnitude of Clinical Benefit Scale (ESMO-MCBS) agli RCT di fase III analizzati per ricavare uno score relativo all'entità del beneficio clinico ottenuto per ciascun RCT. Sono state calcolate inoltre le differenze in termini di PFS tra i diversi bracci di trattamento rapportandole con i costi dei farmaci necessari per ottenere il beneficio di PFS. La nostra analisi ha valutato 11 RCT di fase III, per un totale di 4572 pazienti. Combinando i costi della terapia con la misura dell'efficacia espressa dalla PFS, è stato ottenuto un costo di 74,12 euro (€) per mese di vita guadagnato in termini di PFS con la combinazione di 5-fluorouracil, leucovorin, irinotecan e oxaliplatino (FOLFIRINOX), 90,14 € per la combinazione di gemcitabina e oxaliplatino (GEMOX) e 4708,7 € per la combinazione di nab-paclitaxel e gemcitabina. Da questo punto di vista riteniamo che l'utilizzo delle "vecche chemioterapie di combinazione" (per es., GEMOX) non dovrebbe essere completamente abbandonato, ma valutato sul singolo paziente, sulla base di diversi fattori (età, ECOG PS, comorbilità, carico di malattia), al fine di ottenere una reale "tailored therapy".

Effect of two types of control questions and two question formats on the outcomes of polygraph examinations.

PubMed

Horvath, Frank; Palmatier, John J

2008-07-01

Two major variations of polygraph "Control Question" testing, the Zone Comparison (ZoC) and the Modified General Question Test (MGQT) were evaluated. Within each, the type of control question, Exclusive or "time bar" (e.g., "Before you were 21, did you ever...") and Nonexclusive or "no time bar" (e.g., "Did you ever....?") was manipulated in a mock theft scenario, with 80 male and 40 female subjects randomly assigned to be either innocent or guilty. Polygraphic data collected by experienced field examiners were numerically scored by an evaluator blind to all aspects of the study. Decision accuracy was not related to the type of procedure (ZoC/MGQT) used or the subject's sex. Accuracy was significantly related to the type of control question [chi(2) (2) = 11.46, p = 0.003; tau c = 0.29]. Nonexclusive control questions produced greater accuracy than Exclusive control questions on both innocent and guilty subjects. These results and subjects' self-reports support the general "theory" on which control question (CQ) testing is based. The need for better empirical support of accepted dogma and current field practices is strongly indicated by these findings.

Impact of Partial and Comprehensive Smoke-Free Regulations on Indoor Air Quality in Bars

PubMed Central

Kim, Jeonghoon; Ban, Hyunkyung; Hwang, Yunhyung; Ha, Kwonchul; Lee, Kiyoung

2016-01-01

In Korea, smoke-free regulations have been gradually implemented in bars based on venue size. Smoking bans were implemented in 2013 for bars ≥150 m2, in 2014 for bars ≥100 m2, and in 2015 for bars of all sizes. The purpose of this study was to determine indoor fine particle (PM2.5) concentrations in bars before and after implementation of the smoke-free policies based on venue size. Indoor PM2.5 concentrations were measured with real-time aerosol monitors at four time points: (1) pre-regulation (n = 75); (2) after implementing the ban in bars ≥150 m2 (n = 75); (3) after implementing the ban in bars ≥100 m2 (n = 107); and (4) when all bars were smoke-free (n = 79). Our results showed that the geometric mean of the indoor PM2.5 concentrations of all bars decreased from 98.4 μg/m3 pre-regulation to 79.5, 42.9, and 26.6 μg/m3 after the ban on smoking in bars ≥150 m2, ≥100 m2, and all bars, respectively. Indoor PM2.5 concentrations in bars of each size decreased only after the corresponding regulations were implemented. Although smoking was not observed in Seoul bars after smoking was banned in all bars, smoking was observed in 4 of 21 bars in Changwon. Our study concludes that the greatest decrease in PM2.5 concentrations in bars was observed after the regulation covering all bars was implemented. However, despite the comprehensive ban, smoking was observed in bars in Changwon. Strict compliance with the regulations is needed to improve indoor air quality further. PMID:27472349

Impact of Partial and Comprehensive Smoke-Free Regulations on Indoor Air Quality in Bars.

PubMed

Kim, Jeonghoon; Ban, Hyunkyung; Hwang, Yunhyung; Ha, Kwonchul; Lee, Kiyoung

2016-07-26

In Korea, smoke-free regulations have been gradually implemented in bars based on venue size. Smoking bans were implemented in 2013 for bars ≥150 m², in 2014 for bars ≥100 m², and in 2015 for bars of all sizes. The purpose of this study was to determine indoor fine particle (PM2.5) concentrations in bars before and after implementation of the smoke-free policies based on venue size. Indoor PM2.5 concentrations were measured with real-time aerosol monitors at four time points: (1) pre-regulation (n = 75); (2) after implementing the ban in bars ≥150 m² (n = 75); (3) after implementing the ban in bars ≥100 m² (n = 107); and (4) when all bars were smoke-free (n = 79). Our results showed that the geometric mean of the indoor PM2.5 concentrations of all bars decreased from 98.4 μg/m³ pre-regulation to 79.5, 42.9, and 26.6 μg/m³ after the ban on smoking in bars ≥150 m², ≥100 m², and all bars, respectively. Indoor PM2.5 concentrations in bars of each size decreased only after the corresponding regulations were implemented. Although smoking was not observed in Seoul bars after smoking was banned in all bars, smoking was observed in 4 of 21 bars in Changwon. Our study concludes that the greatest decrease in PM2.5 concentrations in bars was observed after the regulation covering all bars was implemented. However, despite the comprehensive ban, smoking was observed in bars in Changwon. Strict compliance with the regulations is needed to improve indoor air quality further.

Comparison of the passivity between cast alloy and laser-welded titanium overdenture bars.

PubMed

Paiva, Jose; Givan, Daniel A; Broome, James C; Lemons, Jack E; McCracken, Michael S

2009-12-01

The purpose of this study was to investigate the fit of cast alloy overdenture and laser-welded titanium-alloy bars by measuring induced strain upon tightening of the bars on a master cast as well as a function of screw tightening sequence. Four implant analogs were secured into Type IV dental stone to simulate a mandibular edentulous patient cast, and two groups of four overdenture bars were fabricated. Group I was four cast alloy bars and Group II was four laser-welded titanium bars. The cast alloy bars included Au-Ag-Pd, Pd-Ag-Au, Au-Ag-Cu-Pd, and Ag-Pd-Cu-Au, while the laser-welded bars were all Ti-Al-V alloy. Bars were made from the same master cast, were torqued into place, and the total strain in the bars was measured through five strain gauges bonded to the bar between the implants. Each bar was placed and torqued 27 times to 30 Ncm per screw using three tightening sequences. Data were processed through a strain amplifier and analyzed by computer using StrainSmart software. Data were analyzed by ANOVA and Tukey's post hoc test. Significant differences were found between alloy types. Laser-welded titanium bars tended to have lower strains than corresponding cast bars, although the Au-Ag-Pd bar was not significantly different. The magnitudes of total strain were the least when first tightening the ends of the bar. The passivity of implant overdenture bars was evaluated using total strain of the bar when tightening. Selecting a high modulus of elasticity cast alloy or use of laser-welded bar design resulted in the lowest average strain magnitudes. While the effect of screw tightening sequence was minimal, tightening the distal ends first demonstrated the lowest strain, and hence the best passivity.

Revision curricular a partir de un analisis comparativo de las discrepancias en los curriculos de una escuela de optometria en Puerto Rico con las competencias requeridas para las agencias de revalida y acreditacion 2004

NASA Astrophysics Data System (ADS)

Rivera Pacheco, Andres

El proposito de esta investigacion, un estudio cualitativo de caso, fue comparar y contrastar el curriculo vigente de la Escuela de Optometria de la UIAPR con las competencias y estandares requeridos por las agencias de acreditacion y de revalida. Con este proposito, decidimos realizar una revision y un analisis de documentos: el prontuario de cada uno de los cursos de los curriculos implantados en el 1993 y en el 2001; las competencias y estandares establecidos por las agencias de revalida y de acreditacion; y las estadisticas en las que se analiza el porcentaje de estudiantes que aprueban cada una de las partes de los examenes de revalida entre el 1998 al 2003. Se realizaron entrevistas dirigidas para dar apoyo y complementar la revision y el analisis de estos documentos. Los participantes de las entrevistas fueron tres estudiantes de la clase de optometria del 2004 (ultima clase del curriculo del 1993); tres estudiantes de la clase de optometria del 2005 (primera clase graduanda del curriculo vigente) y tres profesores y/o directores de los Departamentos de Ciencias Basicas, Ciencias Clinicas y Cuidado al Paciente. Esta investigacion se enmarco en el modelo de evaluacion curricular de discrepancia de Malcolm Provus y en el modelo de desarrollo basado en competencias. Uno de los hallazgos mas importantes del estudio es que los cambios que se implantaron al curriculo del 2001 no han logrado que los estudiantes mejoren su ejecucion en los examenes de revalida. Por otro lado, se encontro que el curriculo vigente atiende completamente los estandares de la practica de Optometria, pero no las competencias. Esta informacion fue validada mediante el uso de una tabla de cotejo para el analisis de los cursos y de la informacion obtenida de las entrevistas. El estudio determina y concluye que existen discrepancias entre los prontuarios de los cursos del curriculo y las competencias requeridas por la agencia de revalida. Segundo, que el Departamento de Ciencias Basicas es el que presenta mas deficiencias en el desarrollo de las competencias. El investigador recomienda disenar e implantar un curriculo basado en competencias y proveer formacion en didactica y procesos de aprendizaje a los profesores.

El rol de Ia colaboracion y el Modelo de Aprendizaje Basado en Proyectos (ABPr) mediante el lente de la Teoria de Actividad (CHAT): un estudio de caso con estudiantes de 9no grado

NASA Astrophysics Data System (ADS)

Delgado, Isabel C.

Los modelos de eensenanza y aprendizaje constructivistas conceptualizan el aprendizaje como un proceso activo. El modelo de Aprendizaje Basado en Proyectos (ABPr) se distingue por una serie de componentes, entre los cuales se destaca el aspecto colaborativo y cooperativo como un reto al momento de su implantacion. Son pocas las investigaciones que se concentran en este aspecto del modelo. En este estudio, se analizaron las diversas interacciones que surgen durante la implantacion de una unidad curricular sobre el tema de Geologia de Puerto Rico, la cual se diseno con el modelo ABPr cuyo enfoque es orientacion a proyectos. Particularmente, se examinaron las interacciones sociales que surgen entre los pares y entre pares y docente durante el proceso de planificacion y desarrollo de los productos finales, al igual que las interacciones entre los estudiantes y el material didactico en estas etapas del modelo. La investigacion es de tipo cualitativo e incorpora como diseno el estudio de caso. Las diversas interacciones constituyen la unidad de analisis. En el estudio participaron 19 estudiantes de 9no grado, a quienes se organizaron en 5 grupos colaborativos por temas de interes (Pangea, Placas tectonicas, Volcanes, Tsunamis y Terremotos). Las tecnicas que se utilizaron para recopilar los datos fueron: observaciones participativas, grupos focales y analisis de documentos (cuadernos reflexivos y respuestas de los estudiantes a la pregunta central del proyecto). Para el analisis de los datos se aplico la teoria de actividad (CHAT) que concentra la unidad de analisis en la actividad humana en un contexto particular. Los resultados del estudio senalan que las interacciones entre pares, entre pares y docente, asi como entre estudiantes y material didactico son fundamentales en el proceso de aprendizaje. Una mayor interaccion entre pares durante las etapas de planificar y desarrollar los productos finales de la unidad, promueve una mejor comprension de los conceptos de la unidad, segun evidencia los productos finales del ABPr. La interaccion con el docente es muy importante para mediar los conflictos y desacuerdos que surgen como parte de las interacciones entre pares. Por lo tanto, el uso de diversas estrategias de andamiaje por parte del docente durante las reuniones de los grupos colaborativos es esencial para el exito del modelo ABPr.

The bridge technique for pectus bar fixation: a method to make the bar un-rotatable.

PubMed

Park, Hyung Joo; Kim, Kyung Soo; Moon, Young Kyu; Lee, Sungsoo

2015-08-01

Pectus bar rotation is a major challenge in pectus repair. However, to date, no satisfactory technique to completely eliminate bar displacement has been introduced. Here, we propose a bar fixation technique using a bridge that makes the bar unmovable. The purpose of this study was to determine the efficacy of this bridge technique. A total of 80 patients underwent pectus bar repair of pectus excavatum with the bridge technique from July 2013 to July 2014. The technique involved connecting 2 parallel bars using plate-screws at the ends of the bars. To determine bar position change, the angles between the sternum and pectus bars were measured on postoperative day 5 (POD5) and 4 months (POM4) and compared. The mean patient age was 17.5 years (range, 6-38 years). The mean difference between POD5 and POM4 were 0.23° (P=.602) and 0.35° (P=.338) for the upper and lower bars, respectively. Bar position was virtually unchanged during the follow-up, and there was no bar dislocation or reoperation. A "bridge technique" designed to connect 2 parallel bars using plates and screws was demonstrated as a method to avoid pectus bar displacement. This approach was easy to implement without using sutures or invasive devices. Copyright © 2015 Elsevier Inc. All rights reserved.

Enabling Narrow(est) IWA Coronagraphy with STIS BAR5 and BAR10 Occulters

NASA Astrophysics Data System (ADS)

Schneider, Glenn; Gaspar, Andras; Debes, John; Gull, Theodore; Hines, Dean; Apai, Daniel; Rieke, George

2017-09-01

The Space Telescope Imaging Spectrograph's (STIS) BAR5 coronagraphic occulter was designed to provide high-contrast, visible-light, imaging in close (> 0.15") angular proximity to bright point-sources. We explored and verified the functionality and utility of the BAR5 occulter. We also investigated, and herein report on, the use of the BAR10 rounded corners as narrow-angle occulters and compare IWA vs. contrast performance for the BAR5, BAR10, and Wedge occulters. With that, we provide recommendations for the most efficacious BAR5 and BAR10 use on-orbit in support of GO science.

Measurement of Cosmic-Ray Antiproton Spectrum at Solar Minimum with a Long-Duration Balloon Flight in Antarctica

NASA Technical Reports Server (NTRS)

Abe, K.; Fuke, H.; Haino, S.; Hams, T.; Hasegawa, M.; Horikoshi, A.; Kim, K. C.; Kusumoto, A.; Lee, M. H.; Makida, Y.;

$X(3873$ and $Y(4140)$ using diquark-antidiquark operators with lattice QCD

DOE PAGES

Padmanath, M.; Lang, C.  B.; Prelovsek Komelj, Sasa

2015-08-01

We perform a lattice study of charmonium-like mesons withmore » $$J^{PC}=1^{++}$$ and three quark contents $$\\bar cc \\bar du$$, $$\\bar cc(\\bar uu+\\bar dd)$$ and $$\\bar cc \\bar ss$$, where the later two can mix with $$\\bar cc$$. This simulation with $$N_f=2$$ and $$m_\\pi=266$$ MeV aims at the possible signatures of four-quark exotic states. We utilize a large basis of $$\\bar cc$$, two-meson and diquark-antidiquark interpolating fields, with diquarks in both anti-triplet and sextet color representations. A lattice candidate for X(3872) with I=0 is observed very close to the experimental state only if both $$\\bar cc$$ and $$D\\bar D^*$$ interpolators are included; the candidate is not found if diquark-antidiquark and $$D\\bar D^*$$ are used in the absence of $$\\bar cc$$. No candidate for neutral or charged X(3872), or any other exotic candidates are found in the I=1 channel. We also do not find signatures of exotic $$\\bar cc\\bar ss$$ candidates below 4.3 GeV, such as Y(4140). Possible physics and methodology related reasons for that are discussed. Along the way, we present the diquark-antidiquark operators as linear combinations of the two-meson operators via the Fierz transformations.« less

Passing of northern pike and common carp through experimental barriers designed for use in wetland restoration

USGS Publications Warehouse

French, John R. P.; Wilcox, Douglas A.; Nichols, S. Jerrine

1999-01-01

Restoration plans for Metzger Marsh, a coastal wetland on the south shore of western Lake Erie, incorporated a fish-control system designed to restrict access to the wetland by large common carp (Cyprinus carpio). Ingress fish passageways in the structure contain slots into which experimental grates of varying size and shape can be placed to selectively allow entry and transfer of other large fish species while minimizing the number of common carp to be handled. We tested different sizes and shapes of grates in experimental tanks in the laboratory to determine the best design for testing in the field. We also tested northern pike (Esox lucius) because lack of access to wetland spawning habitat has greatly reduced their populations in western Lake Erie. Based on our results, vertical bar grates were chosen for installation because common carp were able to pass through circular grates smaller than body height by compressing their soft abdomens; they passed through rectangular grates on the diagonal. Vertical bar grates with 5-cm spacing that were installed across much of the control structure should limit access of common carp larger than 34 cm total length (TL) and northern pike larger than 70 cm. Vertical bar grates selected for initial field trials in the fish passageway had spacings of 5.8 and 6.6 cm, which increased access by common carp to 40 and 47 cm TL and by northern pike to 76 and 81 cm, respectively. The percentage of potential common carp biomass (fish seeking entry) that must be handled in lift baskets in the passageway increased from 0.9 to 4.8 to 15.4 with each increase in spacing between bars. Further increases in spacing would greatly increase the number of common carp that would have to be handled. The results of field testing should be useful in designing selective fish-control systems for other wetland restoration sites adjacent to large water bodies.

Dynamics of 30 large channel bars in the Lower Mississippi River in response to river engineering from 1985 to 2015

NASA Astrophysics Data System (ADS)

Wang, Bo; Xu, Y. Jun

2018-01-01

Channel bars are a major depositional feature in alluvial rivers and their morphodynamics has been investigated intensively in the past several decades. However, relatively less is known about how channel bars in alluvial rivers respond to river engineering and regulations. In this study, we assessed 30-yr morphologic changes of 30 large emerged bars located in a 223 km reach of the highly regulated Lower Mississippi River from Vicksburg, Mississippi, to the Mississippi-Atchafalaya River diversion. Landsat imagery and river stage data between 1985 and 2015 were utilized to characterize bar morphologic features and quantify decadal changes. Based on bar surface areas estimated with the satellite images at different river stages, a rating curve was developed for each of the 30 bars to determine their volumes. Results from this study show that the highly regulated river reach favored the growth of mid-channel and attached bars, while more than half of the point bars showed degradation. Currently, the mid-channel and attached bars accounted for 38% and 34% of the total volume of the 30 bars. The average volume of a single mid-channel bar is over two times that of an attached bar and over four times that of a point bar. Overall, in the past three decades, the total volume of the studied 30 bars increased by 110,118,000 m3 (41%). Total dike length in a dike field was found mostly contributing to the bar volume increase. Currently, the emerged volume of the 30 bars was estimated approximately 378,183,000 m3. The total bar volume is equivalent to 530 million metric tons of coarse sand, based on an average measured bulk density of 1.4 t/m3 for the bar sediment. The findings show that these bars are large sediment reservoirs.

Chemical Evolution and History of Star Formation in the Large Magellanic Cloud

NASA Astrophysics Data System (ADS)

Gustafsson, Bengt

1995-07-01

Large scale processes controlling star formation and nucleosynthesis are fundamental but poorly understood. This is especially true for external galaxies. A detailed study of individual main sequence stars in the LMC Bar is proposed. The LMC is close enough to allow this, has considerable spread in stellar ages and a structure permitting identification of stellar populations and their structural features. The Bar presumably plays a dominant role in the chemical and dynamical evolution of the galaxy. Our knowledge is, at best, based on educated guesses. Still, the major population of the Bar is quite old, and many member stars are relatively evolved. The Bar seems to contain stars similar to those of Intermediate to Extreme Pop II in the Galaxy. We want to study the history of star formation, chemical evolution and initial mass function of the population dominating the Bar. We will use field stars close to the turn off point in the HR diagram. From earlier studies, we know that 250-500 such stars are available for uvby photometry in the PC field. We aim at an accuracy of 0.1 -0.2 dex in Me/H and 25% or better in relative ages. This requires an accuracy of about 0.02 mag in the uvby indices, which can be reached, taking into account errors in calibration, flat fielding, guiding and problems due to crowding. For a study of the luminosity function fainter stars will be included as well. Calibration fields are available in Omega Cen and M 67.

Beta-Adrenergic Receptor Population is Up-Regulated by Increased Cyclic Amp Concentration in Chicken Skeletal Muscle Cells in Culture

NASA Technical Reports Server (NTRS)

Young, Ronald B.; Bridge, Kristin Y.; Vaughn, Jeffrey R.

1999-01-01

Skeletal muscle hypertrophy is promoted in vivo by administration of beta-drenergic receptor (bAR) agonists. Chicken skeletal muscle cells were treated with 1 (mu)M isoproterenol, a strong bAR agonist, between days 7 and 10 in culture. bAR population increased by approximately 40% during this treatment; however, the ability of the cells to synthesize cyclic AMP (cAMP) was diminished by two-fold. The quantity of myosin heavy chain (MHC) was not affected. To understand further the relationship between intracellular cAMP levels, bAR population, and muscle protein accumulation, intracellular cAMP levels were artificially elevated by treatment with 0-10 uM forskolin for up to three days. The basal concentration of CAMP in forskolin-treated cells increased up to 7-fold in a dose dependent manner. Increasing concentrations of forskolin also led to an increase in bAR population, with a maximum increase of approximately 40-60% at 10 uM forskolin. A maximum increase of 40-50% in the quantity of MHC was observed at 0.2 uM forskolin, but higher concentrations of forskolin reduced the quantity of MHC back to control levels. At 0.2 uM forskolin, intracellular levels of cAMP were higher by approximately 35%, and the (beta)AR population was higher by approximately 30%. Neither the number of muscle nuclei fused into myotubes nor the percentage of nuclei in myotubes were affected by forskolin at any of the concentrations studied.

Measurement of the forward-backward asymmetry of $$\\Lambda$$ and $$\\bar{\\Lambda}$$ production in $$p \\bar{p}$$ collisions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abazov, Victor Mukhamedovich

Here, we studymore » $$\\Lambda$$ and $$\\bar{\\Lambda}$$ production asymmetries in $$p \\bar{p} \\rightarrow \\Lambda (\\bar{\\Lambda}) X$$, $$p \\bar{p} \\rightarrow J/\\psi \\Lambda (\\bar{\\Lambda}) X$$, and $$p \\bar{p} \\rightarrow \\mu^\\pm \\Lambda (\\bar{\\Lambda}) X$$ events recorded by the D0 detector at the Fermilab Tevatron collider at $$\\sqrt{s} = 1.96$$ TeV. We find an excess of $$\\Lambda$$'s ($$\\bar{\\Lambda}$$'s) produced in the proton (antiproton) direction. This forward-backward asymmetry is measured as a function of rapidity. We confirm that the $$\\bar{\\Lambda}/\\Lambda$$ production ratio, measured by several experiments with various targets and a wide range of energies, is a universal function of "rapidity loss", i.e., the rapidity difference of the beam proton and the lambda.« less

Measurement of the forward-backward asymmetry of $$\\Lambda$$ and $$\\bar{\\Lambda}$$ production in $$p \\bar{p}$$ collisions

DOE PAGES

Abazov, Victor Mukhamedovich

2016-02-09

Here, we studymore » $$\\Lambda$$ and $$\\bar{\\Lambda}$$ production asymmetries in $$p \\bar{p} \\rightarrow \\Lambda (\\bar{\\Lambda}) X$$, $$p \\bar{p} \\rightarrow J/\\psi \\Lambda (\\bar{\\Lambda}) X$$, and $$p \\bar{p} \\rightarrow \\mu^\\pm \\Lambda (\\bar{\\Lambda}) X$$ events recorded by the D0 detector at the Fermilab Tevatron collider at $$\\sqrt{s} = 1.96$$ TeV. We find an excess of $$\\Lambda$$'s ($$\\bar{\\Lambda}$$'s) produced in the proton (antiproton) direction. This forward-backward asymmetry is measured as a function of rapidity. We confirm that the $$\\bar{\\Lambda}/\\Lambda$$ production ratio, measured by several experiments with various targets and a wide range of energies, is a universal function of "rapidity loss", i.e., the rapidity difference of the beam proton and the lambda.« less

Optimizing Injection Molding Parameters of Different Halloysites Type-Reinforced Thermoplastic Polyurethane Nanocomposites via Taguchi Complemented with ANOVA

PubMed Central

Gaaz, Tayser Sumer; Sulong, Abu Bakar; Kadhum, Abdul Amir H.; Nassir, Mohamed H.; Al-Amiery, Ahmed A.

2016-01-01

Halloysite nanotubes-thermoplastic polyurethane (HNTs-TPU) nanocomposites are attractive products due to increasing demands for specialized materials. This study attempts to optimize the parameters for injection just before marketing. The study shows the importance of the preparation of the samples and how well these parameters play their roles in the injection. The control parameters for injection are carefully determined to examine the mechanical properties and the density of the HNTs-TPU nanocomposites. Three types of modified HNTs were used as untreated HNTs (uHNTs), sulfuric acid treated (aHNTs) and a combined treatment of polyvinyl alcohol (PVA)-sodium dodecyl sulfate (SDS)-malonic acid (MA) (treatment (mHNTs)). It was found that mHNTs have the most influential effect of producing HNTs-TPU nanocomposites with the best qualities. One possible reason for this extraordinary result is the effect of SDS as a disperser and MA as a crosslinker between HNTs and PVA. For the highest tensile strength, the control parameters are demonstrated at 150 °C (injection temperature), 8 bar (injection pressure), 30 °C (mold temperature), 8 min (injection time), 2 wt % (HNTs loading) and mHNT (HNTs type). Meanwhile, the optimized combination of the levels for all six control parameters that provide the highest Young’s modulus and highest density was found to be 150 °C (injection temperature), 8 bar (injection pressure), 32 °C (mold temperature), 8 min (injection time), 3 wt % (HNTs loading) and mHNT (HNTs type). For the best tensile strain, the six control parameters are found to be 160 °C (injection temperature), 8 bar (injection pressure), 32 °C (mold temperature), 8 min (injection time), 2 wt % (HNTs loading) and mHNT (HNTs type). For the highest hardness, the best parameters are 140 °C (injection temperature), 6 bar (injection pressure), 30 °C (mold temperature), 8 min (injection time), 2 wt % (HNTs loading) and mHNT (HNTs type). The analyses are carried out by coordinating Taguchi and ANOVA approaches. Seemingly, mHNTs has shown its very important role in the resulting product. PMID:28774069

Optimizing Injection Molding Parameters of Different Halloysites Type-Reinforced Thermoplastic Polyurethane Nanocomposites via Taguchi Complemented with ANOVA.

PubMed

Gaaz, Tayser Sumer; Sulong, Abu Bakar; Kadhum, Abdul Amir H; Nassir, Mohamed H; Al-Amiery, Ahmed A

2016-11-22

Halloysite nanotubes-thermoplastic polyurethane (HNTs-TPU) nanocomposites are attractive products due to increasing demands for specialized materials. This study attempts to optimize the parameters for injection just before marketing. The study shows the importance of the preparation of the samples and how well these parameters play their roles in the injection. The control parameters for injection are carefully determined to examine the mechanical properties and the density of the HNTs-TPU nanocomposites. Three types of modified HNTs were used as untreated HNTs ( u HNTs), sulfuric acid treated ( a HNTs) and a combined treatment of polyvinyl alcohol (PVA)-sodium dodecyl sulfate (SDS)-malonic acid (MA) (treatment ( m HNTs)). It was found that m HNTs have the most influential effect of producing HNTs-TPU nanocomposites with the best qualities. One possible reason for this extraordinary result is the effect of SDS as a disperser and MA as a crosslinker between HNTs and PVA. For the highest tensile strength, the control parameters are demonstrated at 150 °C (injection temperature), 8 bar (injection pressure), 30 °C (mold temperature), 8 min (injection time), 2 wt % (HNTs loading) and m HNT (HNTs type). Meanwhile, the optimized combination of the levels for all six control parameters that provide the highest Young's modulus and highest density was found to be 150 °C (injection temperature), 8 bar (injection pressure), 32 °C (mold temperature), 8 min (injection time), 3 wt % (HNTs loading) and m HNT (HNTs type). For the best tensile strain, the six control parameters are found to be 160 °C (injection temperature), 8 bar (injection pressure), 32 °C (mold temperature), 8 min (injection time), 2 wt % (HNTs loading) and m HNT (HNTs type). For the highest hardness, the best parameters are 140 °C (injection temperature), 6 bar (injection pressure), 30 °C (mold temperature), 8 min (injection time), 2 wt % (HNTs loading) and m HNT (HNTs type). The analyses are carried out by coordinating Taguchi and ANOVA approaches. Seemingly, m HNTs has shown its very important role in the resulting product.

State-to-state rotationally inelastic scattering of ND[sub 3] on a graphite (0001) surface

DOE Office of Scientific and Technical Information (OSTI.GOV)

LaVilla, M.E.; Ionova, I.V.; Ionov, S.I.

1992-12-15

State-selected molecular beams of deuterated ammonia, [vert bar][ital JKM][epsilon][gt][vert bar]inversion[gt]=[vert bar]1111[gt][vert bar][minus][gt] or [vert bar]222[minus]1[gt][vert bar][minus][gt] and [vert bar]3331[gt][vert bar][minus][gt] states in the proportion 2.3:1, are produced via hexapole electrostatic focusing and then scattered at near-normal incidence on a graphite (0001) surface at [ital T][sub [ital s

Membrane-sculpting BAR domains generate stable lipid microdomains.

PubMed

Zhao, Hongxia; Michelot, Alphée; Koskela, Essi V; Tkach, Vadym; Stamou, Dimitrios; Drubin, David G; Lappalainen, Pekka

2013-09-26

Bin-Amphiphysin-Rvs (BAR) domain proteins are central regulators of many cellular processes involving membrane dynamics. BAR domains sculpt phosphoinositide-rich membranes to generate membrane protrusions or invaginations. Here, we report that, in addition to regulating membrane geometry, BAR domains can generate extremely stable lipid microdomains by "freezing" phosphoinositide dynamics. This is a general feature of BAR domains, because the yeast endocytic BAR and Fes/CIP4 homology BAR (F-BAR) domains, the inverse BAR domain of Pinkbar, and the eisosomal BAR protein Lsp1 induced phosphoinositide clustering and halted lipid diffusion, despite differences in mechanisms of membrane interactions. Lsp1 displays comparable low diffusion rates in vitro and in vivo, suggesting that BAR domain proteins also generate stable phosphoinositide microdomains in cells. These results uncover a conserved role for BAR superfamily proteins in regulating lipid dynamics within membranes. Stable microdomains induced by BAR domain scaffolds and specific lipids can generate phase boundaries and diffusion barriers, which may have profound impacts on diverse cellular processes. Copyright © 2013 The Authors. Published by Elsevier Inc. All rights reserved.

Nanoforging – Innovation in three-dimensional processing and shaping of nanoscaled structures

PubMed Central

Rösler, Joachim

2014-01-01

Summary Background: This paper describes the shaping of freestanding objects out of metallic structures in the nano- and submicron size. The technique used, called nanoforging, is very similar to the macroscopic forging process. Results: With spring actuated tools produced by focused ion beam milling, controlled forging is demonstrated. With only three steps, a conical bar stock is transformed to a flat- and semicircular bent bar stock. Conclusion: Compared with other forming techniques in the reduced scale, nanoforging represents a beneficial approach in forming freestanding metallic structures, due to its simplicity, and supplements other forming techniques. PMID:25161840

Interaction of real and virtual p p bar pairs in J / ψ → p p bar γ (ρ , ω) decays

NASA Astrophysics Data System (ADS)

Milstein, A. I.; Salnikov, S. G.

2017-10-01

The p p bar invariant mass spectra of the processes J / ψ → p p bar ω, J / ψ → p p bar ρ, and J / ψ → p p bar γ close to the p p bar threshold are calculated by means of the N N bar optical potential. The potential model for N N bar interaction in the S10 state is proposed. The parameters of the model are obtained by fitting the cross section of N N bar scattering together with the p p bar invariant mass spectra of the J / ψ decays. Good agreement with the available experimental data is achieved. Using our potential and the Green's function approach we also describe the peak in the η‧π+π- invariant mass spectrum in the decay J / ψ → γη‧π+π- in the energy region near the N N bar threshold.

Genderedness of bar drinking culture and alcohol-related harms: A multi-country study

PubMed Central

Roberts, Sarah C. M.; Bond, Jason; Korcha, Rachael; Greenfield, Thomas K.

2012-01-01

This study explores whether associations between consuming alcohol in bars and alcohol-related harms are consistent across countries and whether country-level characteristics modify associations. We hypothesized that genderedness of bar drinking modifies associations, such that odds of harms associated with bar drinking increase more rapidly in predominantly male bar-drinking countries. Multilevel analysis was used to analyze survey data from 21 countries representing five continents from Gender, Alcohol, and Culture: An International Study (GENACIS). Bar frequency was positively associated with harms overall. Relationships between bar frequency and harms varied across country. Genderedness modified associations between bar frequency and odds of fights, marriage/relationship harms, and work harms. Findings were significant only for men. Contrary to our hypothesis, odds of harms associated with bar drinking increased less rapidly in countries where bar drinking is predominantly male. This suggests predominantly male bar drinking cultures may be protective for males who more frequently drink in bars. PMID:23710158

Different functional modes of BAR domain proteins in formation and plasticity of mammalian postsynapses.

PubMed

Kessels, Michael M; Qualmann, Britta

2015-09-01

A plethora of cell biological processes involve modulations of cellular membranes. By using extended lipid-binding interfaces, some proteins have the power to shape membranes by attaching to them. Among such membrane shapers, the superfamily of Bin-Amphiphysin-Rvs (BAR) domain proteins has recently taken center stage. Extensive structural work on BAR domains has revealed a common curved fold that can serve as an extended membrane-binding interface to modulate membrane topologies and has allowed the grouping of the BAR domain superfamily into subfamilies with structurally slightly distinct BAR domain subtypes (N-BAR, BAR, F-BAR and I-BAR). Most BAR superfamily members are expressed in the mammalian nervous system. Neurons are elaborately shaped and highly compartmentalized cells. Therefore, analyses of synapse formation and of postsynaptic reorganization processes (synaptic plasticity) - a basis for learning and memory formation - has unveiled important physiological functions of BAR domain superfamily members. These recent advances, furthermore, have revealed that the functions of BAR domain proteins include different aspects. These functions are influenced by the often complex domain organization of BAR domain proteins. In this Commentary, we review these recent insights and propose to classify BAR domain protein functions into (1) membrane shaping, (2) physical integration, (3) action through signaling components, and (4) suppression of other BAR domain functions. © 2015. Published by The Company of Biologists Ltd.

Deposition model of a Miocene barred wave- and storm-dominated shoreface and shelf, southeastern Malay basin, offshore west Malaysia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ramli, N.

1986-01-01

The J sandstone is an important hydrocarbon-bearing reservoir in the southeastern part of the Malay basin. The lower and upper members of the J sandstone are composed of shoreface and offshore sediments. The shoreface sequence contains depositional structures characteristic of a barred wave- and storm-dominated shoreface. Each shoreface sequence is laterally associated with a series of stacked offshore bars. Offshore bars can be subdivided into proximal and distal types. Two types of proximal offshore bars have been identified: (1) proximal bars formed largely above fair-weather wave base (inner proximal bars), and (2) proximal bars formed below fair-weather wave base (outermore » proximal bars). The inner proximal bars are closely associated with the shoreface sequence and are similar to the middle and lower shoreface. The presence of poorly sorted, polymodal, very fine to very coarse-grained sandstone beneath well-sorted crestal sandstones of inner proximal bars suggests that these offshore bars may have been deposited rapidly by storms. The crests of the inner proximal offshore bars were subsequently reworked by fair-weather processes, and the crests of the outer proximal and distal offshore bars were reworked by waning storm currents and oscillatory waves. Thick marine shales overlying offshore bars contain isolated sheet sandstones. Each sheet sandstone exhibits features that may be characteristic of distal storm shelf deposits. 15 figures, 2 tables.« less

Comparison of vertical hydraulic conductivity in a streambed-point bar system of a gaining stream

NASA Astrophysics Data System (ADS)

Dong, Weihong; Chen, Xunhong; Wang, Zhaowei; Ou, Gengxin; Liu, Can

2012-07-01

SummaryVertical hydraulic conductivities (Kv) of both streambed and point bars can influence water and solute exchange between streams and surrounding groundwater systems. The sediments in point bars are relatively young compared to the older sediments in the adjacent aquifers but slightly older compared to submerged streambeds. Thus, the permeability in point bar sediments can be different not only from regional aquifer but also from modern streambed. However, there is a lack of detailed studies that document spatial variability of vertical hydraulic conductivity in point bars of meandering streams. In this study, the authors proposed an in situ permeameter test method to measure vertical hydraulic conductivity of the two point bars in Clear Creek, Nebraska, USA. We compared the Kv values in streambed and adjacent point bars through 45 test locations in the two point bars and 51 test locations in the streambed. The Kv values in the point bars were lower than those in the streambed. Kruskal-Wallis test confirmed that the Kv values from the point bars and from the channel came from two statistically different populations. Within a point bar, the Kv values were higher along the point bar edges than those from inner point bars. Grain size analysis indicated that slightly more silt and clay particles existed in sediments from inner point bars, compared to that from streambed and from locations near the point bar edges. While point bars are the deposits of the adjacent channel, the comparison of two groups of Kv values suggests that post-depositional processes had an effect on the evolution of Kv from channel to point bars in fluvial deposits. We believed that the transport of fine particles and the gas ebullition in this gaining stream had significant effects on the distribution of Kv values in a streambed-point bar system. With the ageing of deposition in a floodplain, the permeability of point bar sediments can likely decrease due to reduced effects of the upward flow and gas ebullition.

Observation and Study of the Baryonic B-meson Decays B to D(*) p pbar (pi) (pi)

DOE Office of Scientific and Technical Information (OSTI.GOV)

del Amo Sanchez, P.; Lees, J.P.; Poireau, V.

We present results for B-meson decay modes involving a charm meson, protons, and pions using 455 x 10{sup 6} B{bar B} pairs recorded by the BABAR detector at the SLAC PEP-II asymmetric-energy e{sup +}e{sup -} collider. The branching fractions are measured for the following ten decays: {bar B}{sup 0} {yields} D{sup 0}p{bar p}, {bar B}{sup 0} {yields} D*{sup 0}p{bar p}, {bar B}{sup 0} {yields} D{sup +}p{bar p}{pi}{sup -}, {bar B}{sup 0} {yields} D*{sup +}p{bar p}{pi}{sup -}, B{sup -} {yields} D{sup 0}p{bar p}{pi}{sup -}, B{sup -} {yields} D*{sup 0}pp{pi}{sup -}, {bar B}{sup 0} {yields} D{sup 0}p{bar p}{pi}{sup -}{pi}{sup +}, {bar B}{supmore » 0} {yields} D*{sup 0}p{bar p}{pi}{sup -}{pi}{sup +}, B{sup -} {yields} D{sup +}p{bar p}{pi}{sup -}{pi}{sup -}, and B{sup -} {yields} D*{sup +}p{bar p}{pi}{sup -}{pi}{sup -}. The four B{sup -} and the two five-body B{sup 0} modes are observed for the first time. The four-body modes are enhanced compared to the three- and the five-body modes. In the three-body modes, the M(p{bar p}) and M(D{sup (*)0}p) invariant mass distributions show enhancements near threshold values. In the four-body mode {bar B}{sup 0} {yields} D{sup +}p{bar p}{pi}{sup -}, the M(p{pi}{sup -}) distribution shows a narrow structure of unknown origin near 1.5GeV/c{sup 2}. The distributions for the five-body modes, in contrast to the others, are similar to the expectations from uniform phase-space predictions.« less

Influence Small State Force Design

DTIC Science & Technology

2012-03-22

Intelligence, Surveillance, and Reconnaissance (ISR), and sustainment formations, become clusters of joint combat power that have the capacity for operations...Global System: Analisis and Ilustrationd from the Case of Island, (Aldershod: Ashgate, 1998), 8-10. 4 Davif Vital, The inequality of States: A

Bar-spheroid interaction in galaxies

NASA Technical Reports Server (NTRS)

Hernquist, Lars; Weinberg, Martin D.

1992-01-01

N-body simulation and linear analysis is employed to investigate the secular evolution of barred galaxies, with emphasis on the interaction between bars and spheroidal components of galaxies. This interaction is argued to drive secular transfer of angular momentum from bars to spheroids, primarily through resonant coupling. A moderately strong bar, having mass within corotation about 0.3 times the enclosed spheroid mass, is predicted to shed all its angular momentum typically in less than about 10 exp 9 yr. Even shorter depletion time scales are found for relatively more massive bars. It is suggested either that spheroids around barred galaxies are structured so as to inhibit strong coupling with bars, or that bars can form by unknown processes long after disks are established. The present models reinforce the notion that bars can drive secular evolution in galaxies.

Dynamic analysis of four bar planar mechanism extended to six-bar planar mechanism with variable topology

NASA Astrophysics Data System (ADS)

Belleri, Basayya K.; Kerur, Shravankumar B.

2018-04-01

A computer-oriented procedure for solving the dynamic force analysis problem for general planar mechanisms is presented. This paper provides position analysis, velocity analysis, acceleration analysis and force analysis of six bar mechanism with variable topology approach. Six bar mechanism is constructed by joining two simple four bar mechanisms. Initially the position, velocity and acceleration analysis of first four bar mechanism are determined by using the input parameters. The outputs (angular displacement, velocity and acceleration of rocker)of first four bar mechanism are used as input parameter for the second four bar mechanism and the position, velocity, acceleration and forces are analyzed. With out-put parameters of second four-bar mechanism the force analysis of first four-bar mechanism is carried out.

Radio Frequency Identification Applications in Pavements

DOT National Transportation Integrated Search

2014-08-01

Radio frequency identification (RFID) technology is widely used for inventory control, tool and material tracking, and other similar applications where line-of-sight optical bar codes are inconvenient or impractical. Several applications of RFID tech...

The Carnegie-Irvine Galaxy Survey. V. Statistical Study of Bars and Buckled Bars

NASA Astrophysics Data System (ADS)

Li, Zhao-Yu; Ho, Luis C.; Barth, Aaron J.

2017-08-01

Simulations have shown that bars are subject to a vertical buckling instability that transforms thin bars into boxy or peanut-shaped structures, but the physical conditions necessary for buckling to occur are not fully understood. We use the large sample of local disk galaxies in the Carnegie-Irvine Galaxy Survey to examine the incidence of bars and buckled bars across the Hubble sequence. Depending on the disk inclination angle (I), a buckled bar reveals itself as either a boxy/peanut-shaped bulge (at high I) or as a barlens structure (at low I). We visually identify bars, boxy/peanut-shaped bulges, and barlenses, and examine the dependence of bar and buckled bar fractions on host galaxy properties, including Hubble type, stellar mass, color, and gas mass fraction. We find that the barred and unbarred disks show similar distributions in these physical parameters. The bar fraction is higher (70%-80%) in late-type disks with low stellar mass (M * < 1010.5 M ⊙) and high gas mass ratio. In contrast, the buckled bar fraction increases to 80% toward massive and early-type disks (M * > 1010.5 M ⊙), and decreases with higher gas mass ratio. These results suggest that bars are more difficult to grow in massive disks that are dynamically hotter than low-mass disks. However, once a bar forms, it can easily buckle in the massive disks, where a deeper potential can sustain the vertical resonant orbits. We also find a probable buckling bar candidate (ESO 506-G004) that could provide further clues to understand the timescale of the buckling process.

Galaxy Zoo: Observing secular evolution through bars

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cheung, Edmond; Faber, S. M.; Koo, David C.

In this paper, we use the Galaxy Zoo 2 data set to study the behavior of bars in disk galaxies as a function of specific star formation rate (SSFR) and bulge prominence. Our sample consists of 13,295 disk galaxies, with an overall (strong) bar fraction of 23.6% ± 0.4%, of which 1154 barred galaxies also have bar length (BL) measurements. These samples are the largest ever used to study the role of bars in galaxy evolution. We find that the likelihood of a galaxy hosting a bar is anticorrelated with SSFR, regardless of stellar mass or bulge prominence. We findmore » that the trends of bar likelihood and BL with bulge prominence are bimodal with SSFR. We interpret these observations using state-of-the-art simulations of bar evolution that include live halos and the effects of gas and star formation. We suggest our observed trends of bar likelihood with SSFR are driven by the gas fraction of the disks, a factor demonstrated to significantly retard both bar formation and evolution in models. We interpret the bimodal relationship between bulge prominence and bar properties as being due to the complicated effects of classical bulges and central mass concentrations on bar evolution and also to the growth of disky pseudobulges by bar evolution. These results represent empirical evidence for secular evolution driven by bars in disk galaxies. This work suggests that bars are not stagnant structures within disk galaxies but are a critical evolutionary driver of their host galaxies in the local universe (z < 1).« less

Sediment storage time in a simulated meandering river's floodplain, comparisons of point bar and overbank deposits

NASA Astrophysics Data System (ADS)

Ackerman, T. R.; Pizzuto, J. E.

2016-12-01

Sediment may be stored briefly or for long periods in alluvial deposits adjacent to rivers. The duration of sediment storage may affect diagenesis, and controls the timing of sediment delivery, affecting the propagation of upland sediment signals caused by tectonics, climate change, and land use, and the efficacy of watershed management strategies designed to reduce sediment loading to estuaries and reservoirs. Understanding the functional form of storage time distributions can help to extrapolate from limited field observations and improve forecasts of sediment loading. We simulate stratigraphy adjacent to a modeled river where meander migration is driven by channel curvature. The basal unit is built immediately as the channel migrates away, analogous to a point bar; rules for overbank (flood) deposition create thicker deposits at low elevations and near the channel, forming topographic features analogous to natural levees, scroll bars, and terraces. Deposit age is tracked everywhere throughout the simulation, and the storage time is recorded when the channel returns and erodes the sediment at each pixel. 210 ky of simulated run time is sufficient for the channel to migrate 10,500 channel widths, but only the final 90 ky are analyzed. Storage time survivor functions are well fit by exponential functions until 500 years (point bar) or 600 years (overbank) representing the youngest 50% of eroded sediment. Then (until an age of 12 ky, representing the next 48% (point bar) or 45% (overbank) of eroding sediment), the distributions are well fit by heavy tailed power functions with slopes of -1 (point bar) and -0.75 (overbank). After 12 ky (6% of model run time) the remainder of the storage time distributions become exponential (light tailed). Point bar sediment has the greatest chance (6%) of eroding at 120 years, as the river reworks recently deposited point bars. Overbank sediment has an 8% chance of eroding after 1 time step, a chance that declines by half after 3 time steps. The high probability of eroding young overbank deposits occurs as the river reworks recently formed natural levees. These results show that depositional environment affects river floodplain storage times shorter than a few centuries, and suggest that a power law distribution with a truncated tail may be the most reasonable functional fit.

Oligomerization but Not Membrane Bending Underlies the Function of Certain F-BAR Proteins in Cell Motility and Cytokinesis.

PubMed

McDonald, Nathan A; Vander Kooi, Craig W; Ohi, Melanie D; Gould, Kathleen L

2015-12-21

F-BAR proteins function in diverse cellular processes by linking membranes to the actin cytoskeleton. Through oligomerization, multiple F-BAR domains can bend membranes into tubules, though the physiological importance of F-BAR-to-F-BAR assemblies is not yet known. Here, we investigate the F-BAR domain of the essential cytokinetic scaffold, Schizosaccharomyces pombe Cdc15, during cytokinesis. Challenging a widely held view that membrane deformation is a fundamental property of F-BARs, we report that the Cdc15 F-BAR binds, but does not deform, membranes in vivo or in vitro, and six human F-BAR domains-including those from Fer and RhoGAP4-share this property. Nevertheless, tip-to-tip interactions between F-BAR dimers are critical for Cdc15 oligomerization and high-avidity membrane binding, stabilization of contractile ring components at the medial cortex, and the fidelity of cytokinesis. F-BAR oligomerization is also critical for Fer and RhoGAP4 physiological function, demonstrating its broad importance to F-BAR proteins that function without membrane bending. Copyright © 2015 Elsevier Inc. All rights reserved.

Precise predictions for V+jets dark matter backgrounds

NASA Astrophysics Data System (ADS)

Lindert, J. M.; Pozzorini, S.; Boughezal, R.; Campbell, J. M.; Denner, A.; Dittmaier, S.; Gehrmann-De Ridder, A.; Gehrmann, T.; Glover, N.; Huss, A.; Kallweit, S.; Maierhöfer, P.; Mangano, M. L.; Morgan, T. A.; Mück, A.; Petriello, F.; Salam, G. P.; Schönherr, M.; Williams, C.

2017-12-01

High-energy jets recoiling against missing transverse energy (MET) are powerful probes of dark matter at the LHC. Searches based on large MET signatures require a precise control of the Z(ν {\\bar{ν }})+ jet background in the signal region. This can be achieved by taking accurate data in control regions dominated by Z(ℓ ^+ℓ ^-)+ jet, W(ℓ ν )+ jet and γ + jet production, and extrapolating to the Z(ν {\\bar{ν }})+ jet background by means of precise theoretical predictions. In this context, recent advances in perturbative calculations open the door to significant sensitivity improvements in dark matter searches. In this spirit, we present a combination of state-of-the-art calculations for all relevant V+ jets processes, including throughout NNLO QCD corrections and NLO electroweak corrections supplemented by Sudakov logarithms at two loops. Predictions at parton level are provided together with detailed recommendations for their usage in experimental analyses based on the reweighting of Monte Carlo samples. Particular attention is devoted to the estimate of theoretical uncertainties in the framework of dark matter searches, where subtle aspects such as correlations across different V+ jet processes play a key role. The anticipated theoretical uncertainty in the Z(ν {\\bar{ν }})+ jet background is at the few percent level up to the TeV range.

Performance simulation of BaBar DIRC bar boxes in TORCH

NASA Astrophysics Data System (ADS)

Föhl, K.; Brook, N.; Castillo García, L.; Cussans, D.; Forty, R.; Frei, C.; Gao, R.; Gys, T.; Harnew, N.; Piedigrossi, D.; Rademacker, J.; Ros García, A.; van Dijk, M.

2017-12-01

TORCH is a large-area precision time-of-flight detector based on the DIRC principle. The DIRC bar boxes of the BaBar experiment at SLAC could possibly be reused to form a part of the TORCH detector time-of-flight wall area, proposed to provide positive particle identification of low momentum kaons in the LHCb experiment at CERN. For a potential integration of BaBar bar boxes into TORCH, new imaging readout optics are required. From the several designs of readout optics that have been considered, two are used in this paper to study the effect of BaBar bar optical imperfections on the detector reconstruction performance. The kaon-pion separation powers obtained from analysing simulated photon hit patterns show the performance reduction for a BaBar bar of non-square geometry compared to a perfectly rectangular cross section.

PREDICTIONS FOR $B \\to \\tau \\bar{\\mu} + \\mu \\bar{\\tau}$

NASA Astrophysics Data System (ADS)

Boubaa, Dris; Datta, Alakabha; Duraisamy, Murugeswaran; Khalil, Shaaban

2013-12-01

The observation of B -> τ \\bar {μ } + μ \\bar {τ } at present experiments would be a clear sign of new physics. In this paper, we calculate this process in an extended Higgs sector framework where the decay is mediated by the exchange of spin zero particle with flavor changing neutral current couplings. If we identify the scalar with the newly discovered state at LHC with a mass 125 GeV then we find that, after imposing all experimental constraints, the BR(Bs -> τ \\bar {μ } + μ \\bar {τ }) can be as high as 10-6 and BR (Bd -> τ \\bar {μ } + μ \\bar {τ }) can be as high as 10-7. We also calculate this process in the minimal supersymmetric standard model and find the BR(Bs ->τ \\bar {μ } + μ \\bar {τ }) is typically of the order 10-8.

The intrinsic three-dimensional shape of galactic bars

NASA Astrophysics Data System (ADS)

Méndez-Abreu, J.; Costantin, L.; Aguerri, J. A. L.; de Lorenzo-Cáceres, A.; Corsini, E. M.

2018-06-01

We present the first statistical study on the intrinsic three-dimensional (3D) shape of a sample of 83 galactic bars extracted from the CALIFA survey. We use the galaXYZ code to derive the bar intrinsic shape with a statistical approach. The method uses only the geometric information (ellipticities and position angles) of bars and discs obtained from a multi-component photometric decomposition of the galaxy surface-brightness distributions. We find that bars are predominantly prolate-triaxial ellipsoids (68%), with a small fraction of oblate-triaxial ellipsoids (32%). The typical flattening (intrinsic C/A semiaxis ratio) of the bars in our sample is 0.34, which matches well the typical intrinsic flattening of stellar discs at these galaxy masses. We demonstrate that, for prolate-triaxial bars, the intrinsic shape of bars depends on the galaxy Hubble type and stellar mass (bars in massive S0 galaxies are thicker and more circular than those in less massive spirals). The bar intrinsic shape correlates with bulge, disc, and bar parameters. In particular with the bulge-to-total (B/T) luminosity ratio, disc g - r color, and central surface brightness of the bar, confirming the tight link between bars and their host galaxies. Combining the probability distributions of the intrinsic shape of bulges and bars in our sample we show that 52% (16%) of bulges are thicker (flatter) than the surrounding bar at 1σ level. We suggest that these percentages might be representative of the fraction of classical and disc-like bulges in our sample, respectively.

Competitive interactions and resource partitioning between northern spotted owls and barred owls in western Oregon

USGS Publications Warehouse

Wiens, J. David; Anthony, Robert G.; Forsman, Eric D.

2014-01-01

The federally threatened northern spotted owl (Strix occidentalis caurina) is the focus of intensive conservation efforts that have led to much forested land being reserved as habitat for the owl and associated wildlife species throughout the Pacific Northwest of the United States. Recently, however, a relatively new threat to spotted owls has emerged in the form of an invasive competitor: the congeneric barred owl (S. varia). As barred owls have rapidly expanded their populations into the entire range of the northern spotted owl, mounting evidence indicates that they are displacing, hybridizing with, and even killing spotted owls. The range expansion by barred owls into western North America has made an already complex conservation issue even more contentious, and a lack of information on the ecological relationships between the 2 species has hampered recovery efforts for northern spotted owls. We investigated spatial relationships, habitat use, diets, survival, and reproduction of sympatric spotted owls and barred owls in western Oregon, USA, during 2007–2009. Our overall objective was to determine the potential for and possible consequences of competition for space, habitat, and food between these previously allopatric owl species. Our study included 29 spotted owls and 28 barred owls that were radio-marked in 36 neighboring territories and monitored over a 24-month period. Based on repeated surveys of both species, the number of territories occupied by pairs of barred owls in the 745-km2 study area (82) greatly outnumbered those occupied by pairs of spotted owls (15). Estimates of mean size of home ranges and core-use areas of spotted owls (1,843 ha and 305 ha, respectively) were 2–4 times larger than those of barred owls (581 ha and 188 ha, respectively). Individual spotted and barred owls in adjacent territories often had overlapping home ranges, but interspecific space sharing was largely restricted to broader foraging areas in the home range with minimal spatial overlap among core-use areas. We used an information-theoretic approach to rank discrete-choice models representing alternative hypotheses about the influence of forest conditions, topography, and interspecific interactions on species-specific patterns of nighttime resource selection. Spotted owls spent a disproportionate amount of time foraging on steep slopes in ravines dominated by old (>120 yr) conifer trees. Barred owls used available forest types more evenly than spotted owls, and were most strongly associated with patches of large hardwood and conifer trees that occupied relatively flat areas along streams. Spotted and barred owls differed in the relative use of old conifer forest (greater for spotted owls) and slope conditions (steeper slopes for spotted owls), but we found no evidence that the 2 species differed in their use of young, mature, and riparian-hardwood forest types. Mean overlap in proportional use of different forest types between individual spotted owls and barred owls in adjacent territories was 81% (range = 30–99%). The best model of habitat use for spotted owls indicated that the relative probability of a location being used was substantially reduced if the location was within or in close proximity to a core-use area of a barred owl. We used pellet analysis and measures of food-niche overlap to determine the potential for dietary competition between spatially associated pairs of spotted owls and barred owls. We identified 1,223 prey items from 15 territories occupied by spotted owls and 4,299 prey items from 24 territories occupied by barred owls. Diets of both species were dominated by nocturnal mammals, but diets of barred owls included many terrestrial, aquatic, and diurnal prey species that were rare or absent in diets of spotted owls. Northern flying squirrels (Glaucomys sabrinus), woodrats (Neotoma fuscipes, N. cinerea), and lagomorphs (Lepus americanus, Sylvilagus bachmani) were primary prey for both owl species, accounting for 81% and 49% of total dietary biomass for spotted owls and barred owls, respectively. Mean dietary overlap between pairs of spotted and barred owls in adjacent territories was moderate (42%; range = 28–70%). Barred owls displayed demographic superiority over spotted owls; annual survival probability of spotted owls from known-fate analyses (0.81, SE = 0.05) was lower than that of barred owls (0.92, SE = 0.04), and pairs of barred owls produced an average of 4.4 times more young than pairs of spotted owls over a 3-year period. We found a strong, positive relationship between seasonal (6-month) survival probabilities of both species and the proportion of old (>120 yr) conifer forest within individual home ranges, which suggested that availability of old forest was a potential limiting factor in the competitive relationship between these 2 species. The annual number of young produced by spotted owls increased linearly with increasing distance from a territory center of a pair of barred owls, and all spotted owls that attempted to nest within 1.5 km of a nest used by barred owls failed to successfully produce young. We identified strong associations between the presence of barred owls and the behavior and fitness potential of spotted owls, as shown by changes in movements, habitat use, and reproductive output of spotted owls exposed to different levels of spatial overlap with territorial barred owls. When viewed collectively, our results support the hypothesis that interference competition with barred owls for territorial space can constrain the availability of critical resources required for successful recruitment and reproduction of spotted owls. Availability of old forests and associated prey species appeared to be the most strongly limiting factors in the competitive relationship between these species, indicating that further loss of these conditions can lead to increases in competitive pressure. Our findings have broad implications for the conservation of spotted owls, as they suggest that spatial heterogeneity in vital rates may not arise solely because of differences among territories in the quality or abundance of forest habitat, but also because of the spatial distribution of a newly established competitor. Experimental removal of barred owls could be used to test this hypothesis and determine whether localized control of barred owl numbers is an ecologically practical and socio-politically acceptable management tool to consider in conservation strategies for spotted owls.

An investigation of the tri-bar gripping system on isometric muscular endurance.

PubMed

Drury, Daniel G; Faggiono, Heath; Stuempfle, Kristin J

2004-11-01

Recently, a new product called the Tri-Bar has been introduced as an alternative to the standard round weightlifting bar. The Tri-Bar has the same weight, length, and circumference as a standard weightlifting bar and differs only in that the shape of the bar is formed like a triangle with rounded edges. Theoretically, the shape of the bar will enhance gripping comfort and increase muscular endurance. We studied 32 moderately trained males who were free from upper-body injury or limitation. Each participant completed 4 visits to the lab as part of 2 separate investigations. The first investigation was a comparison of straight-arm hang times while grasping a standard Olympic bar or a Tri-Bar attached to the top of a power rack. The second investigation involved grasping a standard revolving cable handle or a Tri-Bar revolving handle attached to a weight equal to half the subject's body weight. In both investigations, time was used as a measure of isometric muscular endurance. Differences were determined using a dependent t-test, and a level of significance was set at p < 0.05. Mean hang times were significantly longer when the men hung from the Tri-Bar (107.6 seconds) versus the standard bar (95.4 seconds) (p = 0.015). Conversely, in the investigation using the revolving handles, the round bar produced longer grasping times (71.5 seconds) than the Tri-Bar (62.6 seconds) (p = 0.000). The results of this investigation indicate that a fixed and stable Tri-Bar may help to increase hang time, but a Tri-Bar free to rotate within the grasp may decrease grasping time in comparison to a standard round handle. With regard to exercises that require isometric grasping, the Tri-Bar may be an effective alternative to the standard bar for increasing isometric grasping endurance.

Ecosystem responses to recent oceanographic variability in high-latitude Northern Hemisphere ecosystems

NASA Astrophysics Data System (ADS)

Mueter, Franz J.; Broms, Cecilie; Drinkwater, Kenneth F.; Friedland, Kevin D.; Hare, Jonathan A.; Hunt, George L., Jr.; Melle, Webjørn; Taylor, Maureen

2009-04-01

As part of the international MENU collaboration, we compared and contrasted ecosystem responses to climate-forced oceanographic variability across several high latitude regions of the North Pacific (Eastern Bering Sea (EBS) and Gulf of Alaska (GOA)) and North Atlantic Oceans (Gulf of Maine/Georges Bank (GOM/GB) and the Norwegian/Barents Seas (NOR/BAR)). Differences in the nitrate content of deep source waters and incoming solar radiation largely explain differences in average primary productivity among these ecosystems. We compared trends in productivity and abundance at various trophic levels and their relationships with sea-surface temperature. Annual net primary production generally increases with annual mean sea-surface temperature between systems and within the EBS, BAR, and GOM/GB. Zooplankton biomass appears to be controlled by both top-down (predation by fish) and bottom-up forcing (advection, SST) in the BAR and NOR regions. In contrast, zooplankton in the GOM/GB region showed no evidence of top-down forcing but appeared to control production of major fish populations through bottom-up processes that are independent of temperature variability. Recruitment of several fish stocks is significantly and positively correlated with temperature in the EBS and BAR, but cod and pollock recruitment in the EBS has been negatively correlated with temperature since the 1977 shift to generally warmer conditions. In each of the ecosystems, fish species showed a general poleward movement in response to warming. In addition, the distribution of groundfish in the EBS has shown a more complex, non-linear response to warming resulting from internal community dynamics. Responses to recent warming differ across systems and appear to be more direct and more pronounced in the higher latitude systems where food webs and trophic interactions are simpler and where both zooplankton and fish species are often limited by cold temperatures.

Evaluation of the smoking ban in public places in France one year and five years after its implementation: Findings from the ITC France survey

PubMed Central

Fong, Geoffrey T.; Craig, Lorraine V.; Guignard, Romain; Nagelhout, Gera E.; Tait, Megan K.; Driezen, Pete; Kennedy, Ryan David; Boudreau, Christian; Wilquin, Jean-Louis; Deutsch, Antoine; Beck, François

2013-01-01

France implemented a comprehensive smoke-free policy in public places in February 2007 for workplaces, shopping centres, airports, train stations, hospitals and schools. On January 2008, it was extended to meeting places (bars, restaurants, hotels, casinos, nightclubs). This paper evaluates France’s smoke-free law based on the International Tobacco Control Policy Evaluation Project in France (the ITC France Project), which conducted a cohort survey of approximately 1,500 smokers and 500 non-smokers before the implementation of the laws (Wave 1, conducted December 2006 to February 2007) and two waves after the implementation (Wave 2, conducted between September-November 2008; and Wave 3, conducted between September-December 2012). Results show that the smoke-free law led to a very significant and near total elimination of indoor smoking in key venues such as bars (from 95.9% to 3.7%) and restaurants (from 64.7% to 2.3%) at Wave 2, which was sustained four years later at Wave 3 (1.4% in restaurants; 6.6% in bars). Smoking in workplaces declined significantly after the law (from 42.6% to 19.3%), which continued to decline at Wave 3 (to 12.8%). Support for the smoke-free law increased significantly after their implementation and continued to increase at Wave 3 (among smokers for bars and restaurants; among smokers and non-smokers for workplaces). The findings demonstrate that smoke-free policies that are implemented in ways consistent with the Guidelines for Article 8 of the WHO Framework Convention on Tobacco Control (WHO FCTC) lead to substantial and sustained reductions in tobacco smoke in public places while also leading to high levels of support by the public. PMID:24803715

Positional reference system for ultraprecision machining

DOEpatents

Arnold, Jones B.; Burleson, Robert R.; Pardue, Robert M.

1982-01-01

A stable positional reference system for use in improving the cutting tool-to-part contour position in numerical controlled-multiaxis metal turning machines is provided. The reference system employs a plurality of interferometers referenced to orthogonally disposed metering bars which are substantially isolated from machine strain induced position errors for monitoring the part and tool positions relative to the metering bars. A microprocessor-based control system is employed in conjunction with the plurality of position interferometers and part contour description data inputs to calculate error components for each axis of movement and output them to corresponding axis drives with appropriate scaling and error compensation. Real-time position control, operating in combination with the reference system, makes possible the positioning of the cutting points of a tool along a part locus with a substantially greater degree of accuracy than has been attained previously in the art by referencing and then monitoring only the tool motion relative to a reference position located on the machine base.

Positional reference system for ultraprecision machining

DOEpatents

Arnold, J.B.; Burleson, R.R.; Pardue, R.M.

1980-09-12

A stable positional reference system for use in improving the cutting tool-to-part contour position in numerical controlled-multiaxis metal turning machines is provided. The reference system employs a plurality of interferometers referenced to orthogonally disposed metering bars which are substantially isolated from machine strain induced position errors for monitoring the part and tool positions relative to the metering bars. A microprocessor-based control system is employed in conjunction with the plurality of positions interferometers and part contour description data input to calculate error components for each axis of movement and output them to corresponding axis driven with appropriate scaling and error compensation. Real-time position control, operating in combination with the reference system, makes possible the positioning of the cutting points of a tool along a part locus with a substantially greater degree of accuracy than has been attained previously in the art by referencing and then monitoring only the tool motion relative to a reference position located on the machine base.

Evaluating cyclic fatigue of sealants during outdoor testing

Treesearch

R. Sam Williams; Steven Lacher; Corey Halpin; Christopher White

2009-01-01

A computer-controlled test apparatus (CCTA) and other instrumentation for subjecting sealant specimens to cyclic fatigue during outdoor exposure was developed. The CCTA enables us to use weather-induced conditions to cyclic fatigue specimens and to conduct controlled tests in-situ during the outdoor exposure. Thermally induced dimensional changes of an aluminum bar...

Controlled cooling technology for bar and rod mills -- Computer simulation and operational results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mauk, P.J.; Kruse, M.; Plociennik, U.

The Controlled Cooling Technology (CCT) developed by SMS to simulate the rolling process and automatic control of the water cooling sections is presented. The Controlled Rolling and Cooling Technology (CRCT) model is a key part of the CCT system. It is used to simulate temperature management for the rolling stock on the computer before the actual rolling process takes place. This makes it possible to dispense with extensive rolling tests in the early stages of project planning and to greatly reduce the extent of such tests prior to the start of commercial production in a rolling mill. The CRCT modelmore » has been in use at Von Moos Stahl Ag for three years. It demonstrates that, by targeted improvement of the set-up values in both the technology and the plant, it is possible to improve microstructure quality and achieve better geometrical parameters in the rolled products. Also, the results gained with the CCT system in practical operation at the Kia Steel Bar Mill, Kunsan, Korea, are presented.« less

Interference of Nonstandard Interactions with Standard Model in {B^0} \\to {π ^0}\\bar vv, B_c^ - \\to {D^ - }\\bar vv and \\bar B_s^0 \\to {K^0}\\bar vv Decays

NASA Astrophysics Data System (ADS)

Mahmood, Shakeel; Tahir, Farida; Mir, Azeem

2018-05-01

We study the contributions of nonstandard neutrino interactions (NSI) to the rare decays of pseudoscalar mesons involving neutrinos in the final state {B^0} \\to {π ^0}\\bar vv, B_c^ - \\to {D^ - }\\bar vv and \\bar B_s^0 \\to {\\bar K^0}\\bar vv, It is pointed that dominant contribution comes from the interference between standard model and nonstandard interaction We predict limits on NSIs free parameter ɛ uL ττ and compare them with experimental data. We further compare our results with perturbative QCD (pQCD) and QCD results for these reactions.

Secular Evolution in Barred Galaxies: Observations

NASA Astrophysics Data System (ADS)

Merrifield, M.

2002-12-01

This paper describes a framework for studying galaxy morphology, particularly bar strength, in a quantitative manner, and presents applications of this approach that reveal observational evidence for secular evolution in bar morphology. The distribution of bar strength in galaxies is quite strongly bimodal, suggesting that barred and unbarred systems are distinct entities, and that any evolution between these two states must occur on a relatively rapid timescale. Bars' strengths appear to be correlated with their pattern speeds, implying that these structures weaken as they start to slow, and disappear entirely before the bars have slowed significantly. There is also tantalizing evidence that bars are rare beyond a redshift of z ~ 0.7, indicating that galaxies have only recently evolved to a point where bars can readily form.

State dynamics of a double sandbar system

NASA Astrophysics Data System (ADS)

Price, T. D.; Ruessink, B. G.

2011-04-01

A 9.3-year dataset of low-tide time-exposure images from Surfers Paradise, Northern Gold Coast, Australia was used to characterise the state dynamics of a double sandbar system. The morphology of the nearshore sandbars was described by means of the sequential bar state classification scheme of Wright and Short [1984. Morphodynamic variability of surf zones and beaches: a synthesis. Marine Geology 56, 93-118]. Besides the two end members (the dissipative (D) and the reflective (R) states) and the four intermediate states (longshore bar and trough (LBT), rhythmic bar and beach (RBB), transverse bar and rip (TBR) and low tide terrace (LTT)), we identified two additional intermediate bar states. The erosive transverse bar and rip (eTBR) state related to the dominant oblique angle of wave incidence at the study site and the rhythmic low tide terrace (rLTT) related to the multiple bar setting. Using the alongshore barline variability and alongshore trough continuity as morphological indicators enabled the objective classification of the inner and outer bar states from the images. The outer bar was mostly in the TBR state and generally advanced sequentially through the states LBT-RBB-TBR-eTBR-LBT, with occasional transitions to the D state. Wave events led to abrupt state transitions of the outer bar, but, in contrast to expectations, did not necessarily correspond to upstate transitions. Instead, upstate (downstate) transitions coincided with angles of wave incidence θ larger (smaller) than 30°. The upstate TBR-eTBR-LBT sequence during high-angle events highlights the role of alongshore currents in bar straightening. The outer bar was found to govern the state of the inner bar to a large extent. Two types of inner bar behaviour were distinguished, based on the outer bar state. For intermediate outer bar states, the alongshore variability of the dominant inner rLTT state (52% in time) mainly related to that of the outer bar, implying some sort of morphological coupling. For dissipative outer bar states, however, the more upstate inner bar frequently separated from the shoreline and persistently developed rip channels as TBR became the most frequent state (60% in time).

The F-BAR domains from srGAP1, srGAP2 and srGAP3 regulate membrane deformation differently

PubMed Central

Coutinho-Budd, Jaeda; Ghukasyan, Vladimir; Zylka, Mark J.; Polleux, Franck

2012-01-01

Summary Coordination of membrane deformation and cytoskeletal dynamics lies at the heart of many biological processes critical for cell polarity, motility and morphogenesis. We have recently shown that Slit-Robo GTPase-activating protein 2 (srGAP2) regulates neuronal morphogenesis through the ability of its F-BAR domain to regulate membrane deformation and induce filopodia formation. Here, we demonstrate that the F-BAR domains of two closely related family members, srGAP1 and srGAP3 [designated F-BAR(1) and F-BAR(3), respectively] display significantly different membrane deformation properties in non-neuronal COS7 cells and in cortical neurons. F-BAR(3) induces filopodia in both cell types, though less potently than F-BAR(2), whereas F-BAR(1) prevents filopodia formation in cortical neurons and reduces plasma membrane dynamics. These three F-BAR domains can heterodimerize, and they act synergistically towards filopodia induction in COS7 cells. As measured by fluorescence recovery after photobleaching, F-BAR(2) displays faster molecular dynamics than F-BAR(3) and F-BAR(1) at the plasma membrane, which correlates well with its increased potency to induce filopodia. We also show that the molecular dynamic properties of F-BAR(2) at the membrane are partially dependent on F-Actin. Interestingly, acute phosphatidylinositol 4,5-bisphosphate [PtdIns(4,5)P2] depletion in cells does not interfere with plasma membrane localization of F-BAR(2), which is compatible with our result showing that F-BAR(2) binds to a broad range of negatively-charged phospholipids present at the plasma membrane, including phosphatidylserine (PtdSer). Overall, our results provide novel insights into the functional diversity of the membrane deformation properties of this subclass of F-BAR-domains required for cell morphogenesis. PMID:22467852

The Carnegie-Irvine Galaxy Survey. V. Statistical Study of Bars and Buckled Bars

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Zhao-Yu; Ho, Luis C.; Barth, Aaron J., E-mail: lizy@shao.ac.cn

Simulations have shown that bars are subject to a vertical buckling instability that transforms thin bars into boxy or peanut-shaped structures, but the physical conditions necessary for buckling to occur are not fully understood. We use the large sample of local disk galaxies in the Carnegie-Irvine Galaxy Survey to examine the incidence of bars and buckled bars across the Hubble sequence. Depending on the disk inclination angle ( i ), a buckled bar reveals itself as either a boxy/peanut-shaped bulge (at high i ) or as a barlens structure (at low i ). We visually identify bars, boxy/peanut-shaped bulges, andmore » barlenses, and examine the dependence of bar and buckled bar fractions on host galaxy properties, including Hubble type, stellar mass, color, and gas mass fraction. We find that the barred and unbarred disks show similar distributions in these physical parameters. The bar fraction is higher (70%–80%) in late-type disks with low stellar mass ( M {sub *} < 10{sup 10.5} M {sub ⊙}) and high gas mass ratio. In contrast, the buckled bar fraction increases to 80% toward massive and early-type disks ( M {sub *} > 10{sup 10.5} M {sub ⊙}), and decreases with higher gas mass ratio. These results suggest that bars are more difficult to grow in massive disks that are dynamically hotter than low-mass disks. However, once a bar forms, it can easily buckle in the massive disks, where a deeper potential can sustain the vertical resonant orbits. We also find a probable buckling bar candidate (ESO 506−G004) that could provide further clues to understand the timescale of the buckling process.« less

A comparison of two soldering techniques on the misfit of bar-retained implant-supported overdentures.

PubMed

Alvarez, Angel; Lafita, Pedro; de Llanos, Hector; Gago, Angel; Brizuela, Aritza; Ellacuria, Joseba J

2014-02-01

This study was conducted to measure and compare the effect of the soldering method (torch soldering or ceramic furnace soldering) used for soldering bars to bar-retained, implant-supported overdentures on the fit between the bar gold cylinder and implant transgingival abutment. Thirty-two overdenture implant bars were manufactured and screw retained into two Bränemark implants, which were attached to a cow rib. The bars were randomly distributed in two groups: a torch-soldering group and a porcelain-furnace soldering group. Then all bars were cut and soldered using a torch and a ceramic furnace. The fit between the bar gold cylinders and implant transgingival abutments was measured with a light microscope on the opposite side to the screw tightening side before and after the bar soldering procedure. The data obtained were statistically processed for paired and independent data. The average misfit for all bars before soldering was 33.83 to 54.04 μm. After cutting and soldering the bars, the misfit increased up to a range of 71.74 to 78.79 μm. Both before and after the soldering procedure, the bars soldered using a torch showed a higher misfit when compared to the bars soldered using a porcelain furnace. After the soldering procedure, the misfit was slightly lower on the left side of the bars, which had been soldered using a ceramic furnace. According to our data, the soldering of bars using the torch or furnace oven soldering techniques does not improve the misfit of one-piece cast bars on two implants. The lower misfit was obtained using the porcelain furnace soldering technique. © 2013 by the American College of Prosthodontists.

"Tired of watching customers walk out the door because of the smoke": a content analysis of media coverage of voluntarily smokefree restaurants and bars.

PubMed

McDaniel, Patricia A; Offen, Naphtali; Yerger, Valerie; Forsyth, Susan; Malone, Ruth E

2015-08-08

News media are key sources of information regarding tobacco issues, and help set the tobacco control policy agenda. We examined US news coverage of voluntarily smokefree restaurants and bars in locales without mandatory policies to understand how such initiatives are perceived. We searched three online media databases (Access World News, Lexis Nexis, and Proquest) for all news items, including opinion pieces, published from 1995 to 2011. We coded retrieved items quantitatively, analyzing the volume, type, provenance, prominence, and content of news coverage. We found 986 news items, most published in local newspapers. News items conveyed unambiguous support for voluntarily smokefree establishments, regardless of venue. Mandatory policies were also frequently mentioned, and portrayed positively or neutrally. Restaurant items were more likely to mention health-related benefits of going smokefree, with bar items more likely to mention business-related benefits. Voluntary smokefree rules in bars and restaurants are regarded by news media as reasonable responses to health and business-based concerns about worker and customer exposure to secondhand smoke. As efforts continue to enact comprehensive smokefree policies to protect all in such venues, the media are likely to be supportive partners in the advocacy process, helping to generate public and policymaker support.

High power diode lasers for solid-state laser pumps

NASA Technical Reports Server (NTRS)

Linden, Kurt J.; Mcdonnell, Patrick N.

1994-01-01

The development and commercial application of high power diode laser arrays for use as solid-state laser pumps is described. Such solid-state laser pumps are significantly more efficient and reliable than conventional flash-lamps. This paper describes the design and fabrication of diode lasers emitting in the 780 - 900 nm spectral region, and discusses their performance and reliability. Typical measured performance parameters include electrical-to-optical power conversion efficiencies of 50 percent, narrow-band spectral emission of 2 to 3 nm FWHM, pulsed output power levels of 50 watts/bar with reliability values of over 2 billion shots to date (tests to be terminated after 10 billion shots), and reliable operation to pulse lengths of 1 ms. Pulse lengths up to 5 ms have been demonstrated at derated power levels, and CW performance at various power levels has been evaluated in a 'bar-in-groove' laser package. These high-power 1-cm stacked-bar arrays are now being manufactured for OEM use. Individual diode laser bars, ready for package-mounting by OEM customers, are being sold as commodity items. Commercial and medical applications of these laser arrays include solid-state laser pumping for metal-working, cutting, industrial measurement and control, ranging, wind-shear/atmospheric turbulence detection, X-ray generation, materials surface cleaning, microsurgery, ophthalmology, dermatology, and dental procedures.

Spatial relationships between alcohol-related road crashes and retail alcohol availability.

PubMed

Morrison, Christopher; Ponicki, William R; Gruenewald, Paul J; Wiebe, Douglas J; Smith, Karen

2016-05-01

This study examines spatial relationships between alcohol outlet density and the incidence of alcohol-related crashes. The few prior studies conducted in this area used relatively large spatial units; here we use highly resolved units from Melbourne, Australia (Statistical Area level 1 [SA1] units: mean land area=0.5 km(2); SD=2.2 km(2)), in order to assess different micro-scale spatial relationships for on- and off-premise outlets. Bayesian conditional autoregressive Poisson models were used to assess cross-sectional relationships of three-year counts of alcohol-related crashes (2010-2012) attended by Ambulance Victoria paramedics to densities of bars, restaurants, and off-premise outlets controlling for other land use, demographic and roadway characteristics. Alcohol-related crashes were not related to bar density within local SA1 units, but were positively related to bar density in adjacent SA1 units. Alcohol-related crashes were negatively related to off-premise outlet density in local SA1 units. Examined in one metropolitan area using small spatial units, bar density is related to greater crash risk in surrounding areas. Observed negative relationships for off-premise outlets may be because the origins and destinations of alcohol-affected journeys are in distal locations relative to outlets. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Mitochondrial phylogeny of Chinese barred species of the cyprinid genus Acrossocheilus Oshima, 1919 (Teleostei: Cypriniformes) and its taxonomic implications.

PubMed

Yuan, Le-Yang; Liu, Xiao-Xiang; Zhang, E

2015-12-21

Sequences from the mitochondrial control region of 14 putative species of Acrossocheilus (Cyprinidae) were examined to elucidate phylogenetic relationships within species of the barred group in that genus. Phylogenetic reconstructions were generated using three tree-building methods: maximum parsimony, maximum likelihood, and Bayesian inference. The resultant phylogenies were consistent with monophyly of the majority of the morphologically recognized species. However, mitochondrial DNA sequence evidence is incongruent with monophyly of A. fasciatus, as currently conceived. This species occurs only in the upper Qiantang-Jiang basin in Zhejiang and Anhui provinces, and coastal rivers in the Zhejiang Province. The species formerly recognized as A. paradoxus from Zhejiang Province is A. fasciatus. The specimens previously reported as A. fasciatus from river basins in Fujian Province are misidentified A. wuyiensis. The barred group of Acrossocheilus is shown to be polyphyletic. Acrossocheilus is restricted to the barred species here placed in "Clade II," containing A. paradoxus and relatives. Separate generic status is recommended for A. monticola and for A. longipinnis and their closest relatives, although more information on phylogenetic relationships based on multiple genes is required to develop robust phylogenetic hypotheses and diagnoses. Masticbarbus Tang, 1942 is available for A. longipinnis and three allied species (A. iridescens, A. microstomus and A. lamus).

Carbon sequestration via reaction with basaltic rocks: geochemical modeling and experimental results

USGS Publications Warehouse

Rosenbauer, Robert J.; Thomas, Burt; Bischoff, James L.; Palandri, James

2012-01-01

Basaltic rocks are potential repositories for sequestering carbon dioxide (CO2) because of their capacity for trapping CO2 in carbonate minerals. We carried out a series of thermodynamic equilibrium models and high pressure experiments, reacting basalt with CO2-charged fluids over a range of conditions from 50 to 200 °C at 300 bar. Results indicate basalt has a high reactivity to CO2 acidified brine. Carbon dioxide is taken up from solution at all temperatures from 50 to 200 °C, 300 bar, but the maximum extent and rate of reaction occurs at 100 °C, 300 bar. Reaction path simulations utilizing the geochemical modeling program CHILLER predicted an equilibrium carbonate alteration assemblage of calcite, magnesite, and siderite, but the only secondary carbonate identified in the experiments was a ferroan magnesite. The amount of uptake at 100 °C, 300 bar ranged from 8% by weight for a typical tholeite to 26% for a picrite. The actual amount of CO2 uptake and extent of rock alteration coincides directly with the magnesium content of the rock suggesting that overall reaction extent is controlled by bulk basalt Mg content. In terms of sequestering CO2, an average basaltic MgO content of 8% is equivalent to 2.6 × 108 metric ton CO2/km3 basalt.

[Mortality from respiratory diseases in the provinces of Apulia Region (Southern Italy) from 1933 to 2010].

PubMed

Montinari, Maria Rosa; Gianicolo, Emilio Antonio Luca; Vigotti, Maria Angela

2016-01-01

OBIETTIVI: valutare l'andamento temporale della mortalità per patologie respiratorie nelle province pugliesi utilizzando dati omogenei per fonte e metodologia di calcolo. DISEGNO: analisi ecologica storica degli andamenti temporali di mortalità per tumori e patologie dell'apparato respiratorio nelle province pugliesi, in Puglia e nelle ripartizioni geografiche italiane dal 1933 al 2010. SETTING E PARTECIPANTI: i dati di mortalità e le popolazioni residenti sono di fonte Istat. Sono state esaminate tutte le cause di decesso, il tumore della laringe, il tumore del polmone, l'insieme dei tumori respiratori, la bronchite, la polmonite e la broncopolmonite considerate congiuntamente, e l'insieme delle patologie respiratorie. Le analisi sono disaggregate per sesso dal 1969. PRINCIPALI MISURE DI OUTCOME: rapporti standardizzati di mortalità (SMR%) in riferimento all'Italia, con intervalli di confidenza al 95%, e tassi di mortalità standardizzati col metodo diretto (TSD ) in riferimento alla popolazione standard europea. RISULTATI: dal 1933 al 2010, i TSD per tumori respiratori e per bronchiti diminuiscono in tutte le aree analizzate. Tuttavia, nelle province di Taranto, Brindisi e Lecce, l'SMR% per tumori respiratori, inferiore al riferimento nazionale fino agli anni Sessanta, si allinea (a Brindisi) e supera (a Lecce e Taranto) il riferimento negli anni successivi. Nelle province di Foggia e Bari il numero dei decessi per tumore del polmone è costantemente inferiore all'atteso. CONCLUSIONI: la ricostruzione storica e l'analisi dei trend temporali di mortalità dal 1933 al 2010 mostrano alcune criticità sanitarie in periodi specifici. L'elaborazione dei dati di mortalità per un arco temporale di circa 80 anni ha messo in evidenza la maggiore rilevanza di queste criticità con l'avvio dello sviluppo industriale.

Stability of Heavy Tetraquarks

NASA Astrophysics Data System (ADS)

Valcarce, A.; Vijande, J.; Richard, J.-M.; Garcilazo, H.

2018-03-01

We discuss the stability of tetraquark systems with two different masses. After some reminders about the stability of very asymmetric QQ{\\bar{q}} {\\bar{q}} tetraquarks, we demonstrate that in the all-heavy limit q → Q, the system becomes unstable for standard color-additive models. We also analyze the consequences of symmetry breaking for Qq{\\bar{Q}}{\\bar{q}} configurations: we find a kind of metastability between the lowest threshold Q{\\bar{Q}} + q{\\bar{q}} and the highest one, Q{\\bar{q}}+{\\bar{Q}} q, and we calculate the width of the resonance. Our results are consistent with the experimental observation of narrow hadrons lying well above their lowest decay threshold.

Closed membrane shapes with attached BAR domains subject to external force of actin filaments.

PubMed

Mesarec, Luka; Góźdź, Wojciech; Iglič, Veronika Kralj; Kralj, Samo; Iglič, Aleš

2016-05-01

Membrane deformations induced by attached BAR superfamily domains could trigger or facilitate the growth of plasma membrane protrusions. The BAR domain family consists of BAR, F-BAR and I-BAR domains, each enforcing a different local curvature when attached to the membrane surface. Our theoretical study mainly focuses on the role of I-BAR in the membrane tubular deformations generated or stabilised by actin filaments. The influence of the area density of membrane attached BAR domains and their intrinsic curvature on the closed membrane shapes (vesicles) was investigated numerically. We derived an analytical approximative expression for the critical relative area density of BARs at which the membrane tubular protrusions on vesicles are most prominent. We have shown that the BARs with a higher intrinsic curvature induce thinner and longer cylindrical protrusions. The average orientation of the membrane attached BARs is altered when the vesicle shape is subjected to external force of growing actin rod-like structure inside a vesicle. The average orientation angle of membrane attached BARs may indicate whether the actin filaments are just stabilising the protrusion or generating it by stretching the vesicle. Copyright © 2016 Elsevier B.V. All rights reserved.

Improved Kolsky tension bar for high-rate tensile characterization of materials

NASA Astrophysics Data System (ADS)

Song, Bo; Antoun, Bonnie R.; Connelly, Kevin; Korellis, John; Lu, Wei-Yang

2011-04-01

A new Kolsky tension bar has been re-designed and developed at Sandia National Laboratories, CA. The new design uses the concept that a solid striker is fired to impact an end cap attached to the open end of the gun barrel to generate dynamic tensile loading. The gun barrel here serves as part of the loading device. The incident bar that is connected to the gun barrel and the transmission bar follow the design similar to the Kolsky compression bar. The bar supporting and aligning systems are the same as those in the Kolsky compression bar design described by Song et al (2009 Meas. Sci. Technol. 20 115701). Due to the connection complication among the gun barrel, bars and specimen, stress-wave propagation in the new Kolsky tension bar system is comprehensively analyzed. Based on the stress-wave analysis, the strain gage location on the incident bar needs to be carefully determined. A highly precise laser-beam measurement system is recommended to directly measure the displacement of the incident bar end. Dynamic tensile characterization of a 4330-V steel using this new Kolsky tension bar is presented as an example.

Aspartame sensitivity? A double blind randomised crossover study.

PubMed

Sathyapalan, Thozhukat; Thatcher, Natalie J; Hammersley, Richard; Rigby, Alan S; Courts, Fraser L; Pechlivanis, Alexandros; Gooderham, Nigel J; Holmes, Elaine; le Roux, Carel W; Atkin, Stephen L

2015-01-01

Aspartame is a commonly used intense artificial sweetener, being approximately 200 times sweeter than sucrose. There have been concerns over aspartame since approval in the 1980s including a large anecdotal database reporting severe symptoms. The objective of this study was to compare the acute symptom effects of aspartame to a control preparation. This was a double-blind randomized cross over study conducted in a clinical research unit in United Kingdom. Forty-eight individual who has self reported sensitivity to aspartame were compared to 48 age and gender matched aspartame non-sensitive individuals. They were given aspartame (100mg)-containing or control snack bars randomly at least 7 days apart. The main outcome measures were acute effects of aspartame measured using repeated ratings of 14 symptoms, biochemistry and metabonomics. Aspartame sensitive and non-sensitive participants differed psychologically at baseline in handling feelings and perceived stress. Sensitive participants had higher triglycerides (2.05 ± 1.44 vs. 1.26 ± 0.84mmol/L; p value 0.008) and lower HDL-C (1.16 ± 0.34 vs. 1.35 ± 0.54 mmol/L; p value 0.04), reflected in 1H NMR serum analysis that showed differences in the baseline lipid content between the two groups. Urine metabonomic studies showed no significant differences. None of the rated symptoms differed between aspartame and control bars, or between sensitive and control participants. However, aspartame sensitive participants rated more symptoms particularly in the first test session, whether this was placebo or control. Aspartame and control bars affected GLP-1, GIP, tyrosine and phenylalanine levels equally in both aspartame sensitive and non-sensitive subjects. Using a comprehensive battery of psychological tests, biochemistry and state of the art metabonomics there was no evidence of any acute adverse responses to aspartame. This independent study gives reassurance to both regulatory bodies and the public that acute ingestion of aspartame does not have any detectable psychological or metabolic effects in humans. ISRCTN Registry ISRCTN39650237.

Laboratory and Workplace Assessments of Rivet Bucking Bar Vibration Emissions

PubMed Central

McDowell, Thomas W.; Warren, Christopher; Xu, Xueyan S.; Welcome, Daniel E.; Dong, Ren G.

2016-01-01

Sheet metal workers operating rivet bucking bars are at risk of developing hand and wrist musculoskeletal disorders associated with exposures to hand-transmitted vibrations and forceful exertions required to operate these hand tools. New bucking bar technologies have been introduced in efforts to reduce workplace vibration exposures to these workers. However, the efficacy of these new bucking bar designs has not been well documented. While there are standardized laboratory-based methodologies for assessing the vibration emissions of many types of powered hand tools, no such standard exists for rivet bucking bars. Therefore, this study included the development of a laboratory-based method for assessing bucking bar vibrations which utilizes a simulated riveting task. With this method, this study evaluated three traditional steel bucking bars, three similarly shaped tungsten alloy bars, and three bars featuring spring-dampeners. For comparison the bucking bar vibrations were also assessed during three typical riveting tasks at a large aircraft maintenance facility. The bucking bars were rank-ordered in terms of unweighted and frequency-weighted acceleration measured at the hand-tool interface. The results suggest that the developed laboratory method is a reasonable technique for ranking bucking bar vibration emissions; the lab-based riveting simulations produced similar rankings to the workplace rankings. However, the laboratory-based acceleration averages were considerably lower than the workplace measurements. These observations suggest that the laboratory test results are acceptable for comparing and screening bucking bars, but the laboratory measurements should not be directly used for assessing the risk of workplace bucking bar vibration exposures. The newer bucking bar technologies exhibited significantly reduced vibrations compared to the traditional steel bars. The results of this study, together with other information such as rivet quality, productivity, tool weight, comfort, worker acceptance, and initial cost can be used to make informed bucking bar selections. PMID:25381185

Laboratory and workplace assessments of rivet bucking bar vibration emissions.

PubMed

McDowell, Thomas W; Warren, Christopher; Xu, Xueyan S; Welcome, Daniel E; Dong, Ren G

2015-04-01

Sheet metal workers operating rivet bucking bars are at risk of developing hand and wrist musculoskeletal disorders associated with exposures to hand-transmitted vibrations and forceful exertions required to operate these hand tools. New bucking bar technologies have been introduced in efforts to reduce workplace vibration exposures to these workers. However, the efficacy of these new bucking bar designs has not been well documented. While there are standardized laboratory-based methodologies for assessing the vibration emissions of many types of powered hand tools, no such standard exists for rivet bucking bars. Therefore, this study included the development of a laboratory-based method for assessing bucking bar vibrations which utilizes a simulated riveting task. With this method, this study evaluated three traditional steel bucking bars, three similarly shaped tungsten alloy bars, and three bars featuring spring-dampeners. For comparison the bucking bar vibrations were also assessed during three typical riveting tasks at a large aircraft maintenance facility. The bucking bars were rank-ordered in terms of unweighted and frequency-weighted acceleration measured at the hand-tool interface. The results suggest that the developed laboratory method is a reasonable technique for ranking bucking bar vibration emissions; the lab-based riveting simulations produced similar rankings to the workplace rankings. However, the laboratory-based acceleration averages were considerably lower than the workplace measurements. These observations suggest that the laboratory test results are acceptable for comparing and screening bucking bars, but the laboratory measurements should not be directly used for assessing the risk of workplace bucking bar vibration exposures. The newer bucking bar technologies exhibited significantly reduced vibrations compared to the traditional steel bars. The results of this study, together with other information such as rivet quality, productivity, tool weight, comfort, worker acceptance, and initial cost can be used to make informed bucking bar selections. Published by Oxford University Press on behalf of the British Occupational Hygiene Society 2014.

Development of transgenic cotton lines expressing Allium sativum agglutinin (ASAL) for enhanced resistance against major sap-sucking pests.

PubMed

Vajhala, Chakravarthy S K; Sadumpati, Vijaya Kumar; Nunna, Hariprasad Rao; Puligundla, Sateesh Kumar; Vudem, Dashavantha Reddy; Khareedu, Venkateswara Rao

2013-01-01

Mannose-specific Allium sativum leaf agglutinin encoding gene (ASAL) and herbicide tolerance gene (BAR) were introduced into an elite cotton inbred line (NC-601) employing Agrobacterium-mediated genetic transformation. Cotton transformants were produced from the phosphinothricin (PPT)-resistant shoots obtained after co-cultivation of mature embryos with the Agrobacterium strain EHA105 harbouring recombinant binary vector pCAMBIA3300-ASAL-BAR. PCR and Southern blot analysis confirmed the presence and stable integration of ASAL and BAR genes in various transformants of cotton. Basta leaf-dip assay, northern blot, western blot and ELISA analyses disclosed variable expression of BAR and ASAL transgenes in different transformants. Transgenes, ASAL and BAR, were stably inherited and showed co-segregation in T1 generation in a Mendelian fashion for both PPT tolerance and insect resistance. In planta insect bioassays on T2 and T3 homozygous ASAL-transgenic lines revealed potent entomotoxic effects of ASAL on jassid and whitefly insects, as evidenced by significant decreases in the survival, development and fecundity of the insects when compared to the untransformed controls. Furthermore, the transgenic cotton lines conferred higher levels of resistance (1-2 score) with minimal plant damage against these major sucking pests when bioassays were carried out employing standard screening techniques. The developed transgenics could serve as a potential genetic resource in recombination breeding aimed at improving the pest resistance of cotton. This study represents the first report of its kind dealing with the development of transgenic cotton resistant to two major sap-sucking insects.

Development of Transgenic Cotton Lines Expressing Allium sativum Agglutinin (ASAL) for Enhanced Resistance against Major Sap-Sucking Pests

PubMed Central

Nunna, Hariprasad Rao; Puligundla, Sateesh Kumar; Vudem, Dashavantha Reddy; Khareedu, Venkateswara Rao

2013-01-01

Mannose-specific Allium sativum leaf agglutinin encoding gene (ASAL) and herbicide tolerance gene (BAR) were introduced into an elite cotton inbred line (NC-601) employing Agrobacterium-mediated genetic transformation. Cotton transformants were produced from the phosphinothricin (PPT)-resistant shoots obtained after co-cultivation of mature embryos with the Agrobacterium strain EHA105 harbouring recombinant binary vector pCAMBIA3300-ASAL-BAR. PCR and Southern blot analysis confirmed the presence and stable integration of ASAL and BAR genes in various transformants of cotton. Basta leaf-dip assay, northern blot, western blot and ELISA analyses disclosed variable expression of BAR and ASAL transgenes in different transformants. Transgenes, ASAL and BAR, were stably inherited and showed co-segregation in T1 generation in a Mendelian fashion for both PPT tolerance and insect resistance. In planta insect bioassays on T2 and T3 homozygous ASAL-transgenic lines revealed potent entomotoxic effects of ASAL on jassid and whitefly insects, as evidenced by significant decreases in the survival, development and fecundity of the insects when compared to the untransformed controls. Furthermore, the transgenic cotton lines conferred higher levels of resistance (1–2 score) with minimal plant damage against these major sucking pests when bioassays were carried out employing standard screening techniques. The developed transgenics could serve as a potential genetic resource in recombination breeding aimed at improving the pest resistance of cotton. This study represents the first report of its kind dealing with the development of transgenic cotton resistant to two major sap-sucking insects. PMID:24023750

Bar versus ball attachments for implant-supported overdentures in complete edentulism: A systematic review.

PubMed

Anas El-Wegoud, Marwah; Fayyad, Ahmed; Kaddah, Amal; Nabhan, Ashraf

2018-04-01

Implant-supported overdenture is one of the most predictable treatment options used in complete edentulism. However, differences have been reported between bar and ball attachments used to retain overdentures in terms of patient satisfaction and prosthesis retention. The purpose of this study is to compare the effectiveness of bar and ball attachments for conventionally loaded implant-supported overdentures in completely edentulous patients to improve patient satisfaction and prosthesis retention. We conducted the review according to the Cochrane methods and following MECIR standards. We searched Cochrane Oral Health Group Trial register, Cochrane Central Register of Controlled Trials, MEDLINE, and the WHO ICTRP (March 31, 2017). Two review authors assessed trials for inclusion and risk of bias, extracted data, and checked for accuracy. We have expressed results as risk ratio or mean differences, together with their 95% confidence intervals. We included 10 trials (465 participants). After 5 y, one trial reported higher patient satisfaction when bar attachment was used (MD 1.30, 95% CI 0.20-2.40), and reported no difference between both systems in prosthesis retention (MD -0.90, 95% CI -1.90 to 0.10). Two trials reported no implant failures after 1 and 5 y in both attachments. Downgrading of evidence was based on the unclear risk of bias of included studies and the wide CI crossing the line of no effect. There is insufficient evidence to support bar or ball attachment to be used with implant-supported overdentures in completely edentulous patients to improve patient satisfaction and prosthesis retention (PROSPERO 2014:CRD42014014594). © 2017 Wiley Periodicals, Inc.

WHERE THE INDIVIDUAL MEETS THE ECOLOGICAL: A STUDY OF PARENT DRINKING PATTERNS, ALCOHOL OUTLETS AND CHILD PHYSICAL ABUSE

PubMed Central

Freisthler, Bridget; Gruenewald, Paul J.

2012-01-01

Background Despite well-known associations between heavy drinking and child physical abuse, little is known about specific risks related to drinking different amounts of alcohol in different drinking venues. This study uses a context specific dose-response model to examine how drinking in various venues (e.g., at bars or parties) are related to physically abusive parenting practices while controlling for individual and psychosocial characteristics. Methods Data were collected via a telephone survey of parents in 50 cities in California resulting in 2,163 respondents who reported drinking in the past year. Child physical abuse and corporal punishment were measured using the Conflict Tactics Scale, Parent Child version. Drinking behaviors were measured using continued drinking measures. Data were analyzed using zero inflated Poisson models. Results Drinking at homes, parties or bars more frequently was related to greater frequencies of physically abusive parenting practices. The use of greater amounts of alcohol in association with drinking at bars appeared to increase risks for corporal punishment, a dose-response effect. Dose-response relationships were not found for drinking at homes or parties or drinking at bars for physical abuse nor for drinking at home and parties for corporal punishment. Conclusion Frequencies of using drinking venues, particularly bars and home or parties, are associated with greater use of abusive parenting practices. These findings suggest that a parent’s routine drinking activities place children at different risks for being physically abused. They also suggest that interventions that take into account parents’ alcohol use at drinking venues are an important avenue for secondary prevention efforts. PMID:23316780

Systematic review and meta-analysis of the economic impact of smoking bans in restaurants and bars.

PubMed

Cornelsen, Laura; McGowan, Yvonne; Currie-Murphy, Laura M; Normand, Charles

2014-05-01

To review systematically the literature on the economic impact of smoking bans in bars and restaurants and provide an estimate of the impact size using meta-analysis. Studies were identified by systematic database searches and screening references of reviews and relevant studies. Google and web-pages of tobacco control agencies were also searched. The review identified 56 studies using absolute sales, sales ratio or employment data and employing regression methods to evaluate the impact of smoking bans in the United States, Australia or in countries in South America or Europe. The meta-analysis included 39 comparable studies, with 129 cases identified based on the outcome measure, scope of the ban, type of establishment and geographical location. Methodological quality was assessed based on four pre-determined criteria. Study and case selection and data extraction were conducted independently by two researchers. Random-effects meta-analysis of all cases showed no associations between smoking bans and changes in absolute sales or employment. An increase in the share of bar and restaurant sector sales in total retail sales was associated with smoking bans [0.23 percentage-points; 95% confidence interval (CI) 0.08-0.375]. When cases were separated by business type (bars or restaurants or wider hospitality including bars and restaurants), some differential impacts emerged. Meta-analysis of the economic impact of smoking bans in hospitality sector showed overall no substantial economic gains or losses. Differential impacts were observed across individual business types and outcome variable, but at aggregate level these appear to balance out. © 2014 Society for the Study of Addiction.

Does Alcohol Contribute to College Men's Sexual Assault Perpetration? Between- and Within-Person Effects Over Five Semesters.

PubMed

Testa, Maria; Cleveland, Michael J

2017-01-01

The current longitudinal study was designed to consider the time-varying effects of men's heavy episodic drinking (HED) and drinking setting attendance on college sexual assault perpetration. Freshman men (N = 992) were recruited in their first semester and completed online measures at the end of their first five semesters. Using multilevel models, we examined whether men with higher frequency HED (or party or bar attendance) were more likely to perpetrate sexual assault (between-person, Level 2 effect) and whether sexual assault perpetration was more likely in semesters in which HED (or party or bar attendance) was higher than each individual's average (within-person, Level 1 effect). The between-person effect of HED on sexual assault was not significant after accounting for the between-person effects of antisocial behavior, impersonal sex orientation, and low self-control. The within-person effect of HED on sexual assault perpetration was not significant. However, models substituting frequency of party attendance or bar attendance revealed both between- and within-person effects. The odds of sexual assault were increased for men with higher bar and party attendance than the sample as a whole, and in semesters in which party or bar attendance was higher than their own average. Supplemental analyses suggested that these drinking setting effects were explained by hookups, with sexual assault perpetration more likely in semesters in which the number of hookups exceeded one's own average. Findings point toward the importance of drinking contexts, rather than drinking per se, as predictors of college men's sexual assault perpetration.

Tensile strength/yield strength (TS/YS) ratios of high-strength steel (HSS) reinforcing bars

NASA Astrophysics Data System (ADS)

Tavio, Anggraini, Retno; Raka, I. Gede Putu; Agustiar

2018-05-01

The building codes such as American Concrete Institute (ACI) 318M-14 and Standard National Indonesia (SNI) 2847:2013 require that the ratio of tensile strength (TS) and yield strength (YS) should not less than 1.25. The requirement is based on the assumption that a capability of a structural member to develop inelastic rotation capacity is a function of the length of the yield region. This paper reports an investigation on various steel grades, namely Grades 420, 550, 650, and 700 MPa, to examine the impact of different TS/YS ratios if it is less or greater than the required value. Grades 550, 650, and 700 MPa were purposely selected with the intention to examine if these higher grades are still promising to be implemented in special structural systems since they are prohibited by the building codes for longitudinal reinforcement, whereas Grade 420 MPa bars are the maximum limit of yield strength of reinforcing bars that is allowable for longitudinal reinforcement of special structural systems. Tensile tests of these steel samples were conducted under displacement controlled mode to capture the complete stress-strain curves and particularly the post-yield response of the steel bars. From the study, it can be concluded that Grade 420 performed higher TS/YS ratios and they were able to reach up to more than 1.25. However, the High Strength Still (HSS) bars (Grades 550, 600, and 700 MPa) resulted in lower TS/YS ratios (less than 1.25) compared with those of Grade 420 MPa.

Influence of the weighing bar size to determine optimal time of biodiesel-glycerol separation by using the buoyancy weighing-bar method

NASA Astrophysics Data System (ADS)

Tambun, R.; Sibagariang, Y.; Manurung, J.

2018-02-01

The buoyancy weighing-bar method is a novel method in the particle size distribution measurement. This method can measure particle size distributions of the settling particles and floating particles. In this study, the buoyancy weighing-bar method is applied to determine optimal time of biodiesel-glycerol separation. The buoyancy weighing-bar method can be applied to determine the separation time because biodiesel and glycerol have the different densities. The influences of diameter of weighing-bar by using the buoyancy weighing-bar method would be experimentally investigated. The diameters of weighing-bar in this experiment are 8 mm, 10 mm, 15 mm and 20 mm, while the graduated cylinder (diameter : 65 mm) is used as vessel. The samples used in this experiment are the mixture of 95 % of biodiesel and 5 % of glycerol. The data obtained by the buoyancy weighing-bar method are analized by using the gas chromatography to determine the purity of biodiesel. Based on the data obtained, the buoyancy weighing-bar method can be used to detect the separation time of biodiesel-glycerol by using the weighing-bar diameter of 8 mm, 10 mm, 15 mm and 20 mm, but the most accuracy in determination the biodiesel-glycerol separation time is obtained by using the weighing-bar diameter of 20 mm. The biodiesel purity of 97.97 % could be detected at 64 minutes by using the buoyancy weighing-bar method when the weighing-bar diameter of 20 mm is used.

Influence of the weighing bar position in vessel on measurement of cement’s particle size distribution by using the buoyancy weighing-bar method

NASA Astrophysics Data System (ADS)

Tambun, R.; Sihombing, R. O.; Simanjuntak, A.; Hanum, F.

2018-02-01

The buoyancy weighing-bar method is a new simple and cost-effective method to determine the particle size distribution both settling and floating particle. In this method, the density change in a suspension due to particle migration is measured by weighing buoyancy against a weighing-bar hung in the suspension, and then the particle size distribution is calculated using the length of the bar and the time-course change in the mass of the bar. The apparatus of this method consists of a weighing-bar and an analytical balance with a hook for under-floor weighing. The weighing bar is used to detect the density change in suspension. In this study we investigate the influences of position of weighing bar in vessel on settling particle size distribution measurements of cement by using the buoyancy weighing-bar method. The vessel used in this experiment is graduated cylinder with the diameter of 65 mm and the position of weighing bar is in center and off center of vessel. The diameter of weighing bar in this experiment is 10 mm, and the kerosene is used as a dispersion liquids. The results obtained show that the positions of weighing bar in vessel have no significant effect on determination the cement’s particle size distribution by using buoyancy weighing-bar method, and the results obtained are comparable to those measured by using settling balance method.

The role of bedrock in creating habitat in temperate watercourses

NASA Astrophysics Data System (ADS)

Entwistle, N. S.; Heritage, G. L.; Milan, D. J.

2016-12-01

Bedrock influenced rivers are a relatively common yet little studied river type across temperate regions, occurring predominantly in upland areas and in areas where isostatic rebound has promoted rapid watercourse downcutting through resistant bedrock. The presence of bedrock in the bed and banks exerts a major influence on channel development, controlling local flow hydraulics and subsequently influencing in-channel and valley bottom sedimentary feature development. This paper summarises extensive field audit evidence of bedrock influenced features on watercourses in the UK to characterise the diverse morphology of bedrock influenced channels and reviews the bedrock induced hydraulic influences on their development and maintenance. Such features include bedrock waterfalls, steps, rapids and cascades and associated alluvial deposits forming lee bars, bedrock obstruction bars, plunge pool bars and fine sediment drapes and veneers. Bedrock influence on valley bottom features is also reviewed and a functional typology is developed for this river type based on the feature assemblage and degree of bedrock/alluvial influence.

High-brightness line generators and fiber-coupled sources based on low-smile laser diode arrays

NASA Astrophysics Data System (ADS)

Watson, J.; Schleuning, D.; Lavikko, P.; Alander, T.; Lee, D.; Lovato, P.; Winhold, H.; Griffin, M.; Tolman, S.; Liang, P.; Hasenberg, T.; Reed, M.

2008-02-01

We describe the performance of diode laser bars mounted on conductive and water cooled platforms using low smile processes. Total smile of <1μm is readily achieved on both In and AuSn based platforms. Combined with environmentally robust lensing, these mounts form the basis of multiple, high-brightness products. Free-space-coupled devices utilizing conductively-cooled bars delivering 100W from a 200μm, 0.22NA fiber at 976nm have been developed for pumping fiber lasers, as well as for materials processing. Additionally, line generators for graphics and materials processing applications have been produced. Starting from single bars mounted on water-cooled packages that do not require de-ionized or pH-controlled water, these line generators deliver over 80W of power into a line with an aspect ratio of 600:1, and have a BPP of <2mm-mrad in the direction orthogonal to the line.

Experimental and Theoretical Investigations on Bond Strength of GFRP Rebars in Normal and High Strength Concrete

NASA Astrophysics Data System (ADS)

Eswanth, P.; Dhinakaran, G.

2017-07-01

Bond behavior between GFRP bars and concrete is the most important parameter for constructing corrosion free structures by implementing the material. Serviceability of reinforced concrete structures are controlled by bond behavior. GFRP materials behave differently from reinforcing steel in terms of bond. They are of non-homogeneous and anisotropic. Due to this outstanding behavior, there is a difference in transfer of loads between GFRP bars and concrete which made it as an idealized choice of a material. In the present work, the bond strength of GFRP bars in normal and high strength concrete was studied. In total, 12 specimens containing 12 mm, 16 mm diameter rebars which were embedded in 150 mm x 150 mm x 150 mm cubes were investigated. The specimens were subjected to direct tension pull out test in accordance with IS 2770 part 1. The comparison of bond properties of GFRP rebar in normal and high strength concrete showed that pull out load of non-metallic rebar fell well within the range.

Economic evaluation of a 100% smoke-free law on the hospitality industry in an Argentinean province.

PubMed

Candioti, Carlos; Rossini, Gustavo; Depetris de Guiguet, Edith; Costa, Oscar; Schoj, Verónica

2012-06-01

To assess the economic impact of a 100% smoke-free law on bars and restaurants in an Argentinean province. We conducted a time series analysis of restaurant and bar revenues in the province of Santa Fe 31 months before and 29 months after the implementation of the 100% smoke-free environment law. The neighboring province of Entre Rios without smoking restrictions at the time of this study, was used as the control province. Average taxable revenues post-legislation in the province of Santa Fe as a whole and in the two most important cities were higher when compared to the total provincial revenue pre-legislation. No significant differences were observed with the total revenue from the province of Entre Rios. We found no statistically significant evidence that the 100% smoke-free environment legislation in the province of Santa Fe, Argentina, had a negative impact on the revenues of local bars and restaurants.

Diffraction of electromagnetic waves by a metallic bar grating with a defect in dielectric filling of the slits

NASA Astrophysics Data System (ADS)

Kochetova, Lyudmila A.; Prosvirnin, Sergey L.

2018-04-01

The problem of electromagnetic wave diffraction by the metallic bar grating with inhomogeneous dielectric filling of each slit between bars has been investigated by using the mode matching technique. The transmission and the inner field distribution have been analyzed for the structure which has a single defect in the periodic filling of slits. Such periodic structures are of particular interest for applications in optics, as they have the ability to concentrate a strong inner electromagnetic field and are characterized by high-Q transmission resonances. We use a simple approach to control the width and location of the stopband of the structure by placing a defect in the periodic filling of the grating slits. As a result, we observe the narrow resonance of transmission in terms of stopband width of the defect-free grating and confinement of strong inner electromagnetic field. By changing the permittivity of the defect layer we can shift the frequency of the resonant transmission.

Finite element analysis to compare complete denture and implant-retained overdentures with different attachment systems.

PubMed

Barão, Valentim Adelino Ricardo; Assunção, Wirley Gonçalves; Tabata, Lucas Fernando; Delben, Juliana Aparecida; Gomes, Erica Alves; de Sousa, Edson Antonio Capello; Rocha, Eduardo Passos

2009-07-01

This finite element analysis compared stress distribution on complete dentures and implant-retained overdentures with different attachment systems. Four models of edentulous mandible were constructed: group A (control), complete denture; group B, overdenture retained by 2 splinted implants with bar-clip system; group C, overdenture retained by 2 unsplinted implants with o'ring system; and group D, overdenture retained by 2 splinted implants with bar-clip and 2 distally placed o'ring system. Evaluation was performed on Ansys software, with 100-N vertical load applied on central incisive teeth. The lowest maximum general stress value (in megapascal) was observed in group A (64.305) followed by groups C (119.006), D (258.650), and B (349.873). The same trend occurred in supporting tissues with the highest stress value for cortical bone. Unsplinted implants associated with the o'ring attachment system showed the lowest maximum stress values among all overdenture groups. Furthermore, o'ring system also improved stress distribution when associated with bar-clip system.

Glass Fiber Reinforced Polymer Dowel Bar Evaluation

DOT National Transportation Integrated Search

2012-09-01

Glass Fiber Reinforced Polymer (GFRP) dowel bars were installed on one new construction project and two dowel bar : retrofit projects to evaluate the performance of this type of dowel bar in comparison to steel dowel bars installed on the same : cont...

Comparing Monofractal and Multifractal Analysis of Corrosion Damage Evolution in Reinforcing Bars

PubMed Central

Xu, Yidong; Qian, Chunxiang; Pan, Lei; Wang, Bingbing; Lou, Chi

2012-01-01

Based on fractal theory and damage mechanics, the aim of this paper is to describe the monofractal and multifractal characteristics of corrosion morphology and develop a new approach to characterize the nonuniform corrosion degree of reinforcing bars. The relationship between fractal parameters and tensile strength of reinforcing bars are discussed. The results showed that corrosion mass loss ratio of a bar cannot accurately reflect the damage degree of the bar. The corrosion morphology of reinforcing bars exhibits both monofractal and multifractal features. The fractal dimension and the tensile strength of corroded steel bars exhibit a power function relationship, while the width of multifractal spectrum and tensile strength of corroded steel bars exhibit a linear relationship. By comparison, using width of multifractal spectrum as multifractal damage variable not only reflects the distribution of corrosion damage in reinforcing bars, but also reveals the influence of nonuniform corrosion on the mechanical properties of reinforcing bars. The present research provides a new approach for the establishment of corrosion damage constitutive models of reinforcing bars. PMID:22238682

Tree-level contributions to the rare decays B+→π+νν¯, B+→K+νν¯, and B+→K*νν¯ in the Standard Model

NASA Astrophysics Data System (ADS)

Kamenik, Jernej F.; Smith, Christopher

2009-10-01

The tree-level contributions to the rare decays B+ →π+ ννbar, B+ →K+ ννbar, and B+ →K*+ ννbar are analyzed and compared to those occurring in K+ →π+ ννbar, D+ →π+ ννbar, and Ds+ →π+ ννbar. It is shown that these purely long-distance contributions, arising from the exchange of a charged lepton, can be significant in B+ decays for an intermediate τ, potentially blurring the distinction between the modes used to extract B+ →τ+ντ and those used to probe the genuine short-distance b → dννbar and b → sννbar FCNC transitions. Numerically, the tree-level contributions are found to account for 98%, 12% and 14% of the total B+ →π+ ννbar, B+ →K+ ννbar, and B+ →K*+ ννbar rates, respectively.

Measurement of B sup 0 -- B sup 0 mixing using the MARK II at PEP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Porter, F.

B{sup 0}{bar B}{sup 0} mixing has been observed now by several experiments. The signature is the observation of an excess of same-sign dilepton events in datasets containing semileptonic B decays. Several years ago the MARK II published an upper limit on B{sup 0}{bar B}{sup 0} mixing at E{sub cm} = 29 GeV, using data taken at the e{sup +}e{sup {minus}} storage ring PEP. Here we report on the results of a new analysis with increased statistics, using refined methods with better sensitivity and control of systematic effects. 10 refs., 2 figs., 2 tab.

Precisely Controlled Ultrathin Conjugated Polymer Films for Large Area Transparent Transistors and Highly Sensitive Chemical Sensors.

PubMed

Khim, Dongyoon; Ryu, Gi-Seong; Park, Won-Tae; Kim, Hyunchul; Lee, Myungwon; Noh, Yong-Young

2016-04-13

A uniform ultrathin polymer film is deposited over a large area with molecularlevel precision by the simple wire-wound bar-coating method. The bar-coated ultrathin films not only exhibit high transparency of up to 90% in the visible wavelength range but also high charge carrier mobility with a high degree of percolation through the uniformly covered polymer nanofibrils. They are capable of realizing highly sensitive multigas sensors and represent the first successful report of ethylene detection using a sensor based on organic field-effect transistors. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Dynamic tensile characterization of a 4330 steel with kolsky bar techniques.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Song, Bo; Antoun, Bonnie R.; Connelly, Kevin

2010-08-01

There has been increasing demand to understand the stress-strain response as well as damage and failure mechanisms of materials under impact loading condition. Dynamic tensile characterization has been an efficient approach to acquire satisfactory information of mechanical properties including damage and failure of the materials under investigation. However, in order to obtain valid experimental data, reliable tensile experimental techniques at high strain rates are required. This includes not only precise experimental apparatus but also reliable experimental procedures and comprehensive data interpretation. Kolsky bar, originally developed by Kolsky in 1949 [1] for high-rate compressive characterization of materials, has been extended formore » dynamic tensile testing since 1960 [2]. In comparison to Kolsky compression bar, the experimental design of Kolsky tension bar has been much more diversified, particularly in producing high speed tensile pulses in the bars. Moreover, instead of directly sandwiching the cylindrical specimen between the bars in Kolsky bar compression bar experiments, the specimen must be firmly attached to the bar ends in Kolsky tensile bar experiments. A common method is to thread a dumbbell specimen into the ends of the incident and transmission bars. The relatively complicated striking and specimen gripping systems in Kolsky tension bar techniques often lead to disturbance in stress wave propagation in the bars, requiring appropriate interpretation of experimental data. In this study, we employed a modified Kolsky tension bar, newly developed at Sandia National Laboratories, Livermore, CA, to explore the dynamic tensile response of a 4330-V steel. The design of the new Kolsky tension bar has been presented at 2010 SEM Annual Conference [3]. Figures 1 and 2 show the actual photograph and schematic of the Kolsky tension bar, respectively. As shown in Fig. 2, the gun barrel is directly connected to the incident bar with a coupler. The cylindrical striker set inside the gun barrel is launched to impact on the end cap that is threaded into the open end of the gun barrel, producing a tension on the gun barrel and the incident bar.« less

Dynamic tensile characterization of a 4330-V steel with kolsky bar techniques.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Song, Bo; Antoun, Bonnie R.; Connelly, Kevin

2010-09-01

There has been increasing demand to understand the stress-strain response as well as damage and failure mechanisms of materials under impact loading condition. Dynamic tensile characterization has been an efficient approach to acquire satisfactory information of mechanical properties including damage and failure of the materials under investigation. However, in order to obtain valid experimental data, reliable tensile experimental techniques at high strain rates are required. This includes not only precise experimental apparatus but also reliable experimental procedures and comprehensive data interpretation. Kolsky bar, originally developed by Kolsky in 1949 [1] for high-rate compressive characterization of materials, has been extended formore » dynamic tensile testing since 1960 [2]. In comparison to Kolsky compression bar, the experimental design of Kolsky tension bar has been much more diversified, particularly in producing high speed tensile pulses in the bars. Moreover, instead of directly sandwiching the cylindrical specimen between the bars in Kolsky bar compression bar experiments, the specimen must be firmly attached to the bar ends in Kolsky tensile bar experiments. A common method is to thread a dumbbell specimen into the ends of the incident and transmission bars. The relatively complicated striking and specimen gripping systems in Kolsky tension bar techniques often lead to disturbance in stress wave propagation in the bars, requiring appropriate interpretation of experimental data. In this study, we employed a modified Kolsky tension bar, newly developed at Sandia National Laboratories, Livermore, CA, to explore the dynamic tensile response of a 4330-V steel. The design of the new Kolsky tension bar has been presented at 2010 SEM Annual Conference [3]. Figures 1 and 2 show the actual photograph and schematic of the Kolsky tension bar, respectively. As shown in Fig. 2, the gun barrel is directly connected to the incident bar with a coupler. The cylindrical striker set inside the gun barrel is launched to impact on the end cap that is threaded into the open end of the gun barrel, producing a tension on the gun barrel and the incident bar.« less

Morphodynamics structures induced by variations of the channel width

NASA Astrophysics Data System (ADS)

Duro, Gonzalo; Crosato, Alessandra; Tassi, Pablo

2014-05-01

In alluvial channels, forcing effects, such as a longitudinally varying width, can induce the formation of steady bars (Olesen, 1984). The type of bars that form, such as alternate, central or multiple, will mainly depend on the local flow width-to-depth ratio and on upstream conditions (Struiksma et al., 1985). The effects on bar formation of varying the channel width received attention only recently and investigations, based on flume experiments and mathematical modelling, are mostly restricted to small longitudinal sinusoidal variations of the channel width (e.g. Repetto et al., 2002; Wu and Yeh, 2005, Zolezzi et al., 2012; Frascati and Lanzoni, 2013). In this work, we analyze the variations in equilibrium bed topography in a longitudinal width-varying channel with characteristic scales of the Waal River (The Netherlands) using two different 2D depth-averaged morphodynamic models, one based on the Delft3D code and one on Telemac-Mascaret system. In particular, we explore the effects of changing the wavelength of sinusoidal width variations in a straight channel, focusing on the effects of the spatial lag between bar formation and forcing that is observed in numerical models and laboratory experiments (e.g. Crosato et al, 2011). We extend the investigations to finite width variations in which longitudinal changes of the width-to-depth ratio are such that they may affect the type of bars that become unstable (alternate, central or multiple bars). Numerical results are qualitatively validated with field observations and the resulting morphodynamic pattern is compared with the physics-based predictor of river bar modes by Crosato and Mosselman (2009). The numerical models are finally used to analyse the experimental conditions of Wu and Yeh (2005). The study should be seen as merely exploratory. The aim is to investigate possible approaches for future research aiming at assessing the effects of artificial river widening and narrowing to control bar formation in alluvial rivers. References Crosato A. and Mosselman E., 2009. Simple physics-based predictor for the number of river bars and the transition between meandering and braiding. Water Resources Research, 45, W03424, doi: 10.1029/2008WR007242. Crosato A., Mosselman E., Desta F.B. and Uijttewaal W.S.J., 2011. Experimental and numerical evidence for intrinsic nonmigrating bars in alluvial channels. Water Resources Research, AGU, 47(3), W03511, doi 10.1029/2010WR009714. Frascati A. and Lanzoni S., 2013. A mathematical model for meandering rivers with varying width. J. Geophys. Res.Earth Surf., 118, doi:10.1002/jgrf.20084. Olesen K.W., 1984. Alternate bars in and meandering of alluvial rivers. In: River Meandering, Proc. of the Conf. Rivers '83, 24-26 Oct. 1983, New Orleans, Louisiana, U.S.A., ed. Elliott C.M., pp. 873-884, ASCE, New York. ISBN 0-87262-393-9. Repetto R., Tubino, M. and Paola C., 2002. Planimetric instability of channels with variable width. J. Fluid Mech., 457, 79-109. Struiksma N., Olesen K.W., Flokstra C. and De Vriend H.J., 1985. Bed deformation in curved alluvial channels. J. Hydraul. Res., 23(1), 57- 79. Wu F.-C. and Yeh T.-H., 2005. Forced bars induced by variations of channel width: Implications for incipient bifurcation. J. Geophys. Res., 110, F02009, doi:10.1029/2004JF000160. Zolezzi, G., R. Luchi, and M. Tubino (2012), Modeling morphodynamic processes in meandering rivers with spatial width variations, Rev. Geophys., 50, RG4005, doi:10.1029/2012RG000392.

Analisis de mecanismos alternos de coordinacion de la operacion en los puertos fronterizos entre Mexico y Estados Unidos.

DOT National Transportation Integrated Search

2001-12-01

Identificar los problemas de coordinacin Intersectoriales entre dependencias pblicas de Mxico, los problemas originados por la falta de Coordinacin Binacional en los Puertos Fronterizos y los costos que se derivan de estos problemas. Desarrol...

First observation of γγ-> p$$\\bar{p}$$K +K - and search for exotic baryons in pK systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shen, C. P.; Yuan, C. Z.; Adachi, I.

The process γγ→pmore » $$\\bar{p}$$K +K - and its intermediate processes are measured for the first time using a 980 fb -1 data sample collected with the Belle detector at the KEKB asymmetric-energy e +e - collider. The production of p$$\\bar{p}$$K +K - and a Λ(1520) 0 ($$\\bar{Λ}$$(1520) 0) signal in the pK - ($$\\bar{p}$$K +) invariant mass spectrum are clearly observed. However, no evidence for an exotic baryon near 1540 MeV/c 2, denoted as Θ(1540) 0 ($$\\bar{Θ}$$(1540) 0) or Θ(1540) ++ (Θ(1540) --), is seen in the pK - ($$\\bar{p}$$K+) or pK+ ($$\\bar{p}$$K -) invariant mass spectra. Cross sections for γγ→p$$\\bar{p}$$K +K -, Λ(1520) 0$$\\bar{p}$$K ++c.c. and the products σ(γγ→Θ(1540)0$$\\bar{p}$$K ++c.c.)B(Θ(1540) 0→pK -) and σ(γγ→Θ(1540) ++$$\\bar{p}$$K -+c.c.)B(Θ(1540) ++→pK +) are measured. We also determine upper limits on the products of the χ c0 and χ c2 two-photon decay widths and their branching fractions to p$$\\bar{p}$$K +K - at the 90% credibility level.« less

What makes the family of barred disc galaxies so rich: damping stellar bars in spinning haloes

NASA Astrophysics Data System (ADS)

Collier, Angela; Shlosman, Isaac; Heller, Clayton

2018-05-01

We model and analyse the secular evolution of stellar bars in spinning dark matter (DM) haloes with the cosmological spin λ ˜ 0-0.09. Using high-resolution stellar and DM numerical simulations, we focus on angular momentum exchange between stellar discs and DM haloes of various axisymmetric shapes - spherical, oblate, and prolate. We find that stellar bars experience a diverse evolution that is guided by the ability of parent haloes to absorb angular momentum, J, lost by the disc through the action of gravitational torques, resonant and non-resonant. We confirm that dynamical bar instability is accelerated via resonant J-transfer to the halo. Our main findings relate to the long-term secular evolution of disc-halo systems: with an increasing λ, bars experience less growth and basically dissolve after they pass through vertical buckling instability. Specifically, with increasing λ, (1) the vertical buckling instability in stellar bars colludes with inability of the inner halo to absorb J - this emerges as the main factor weakening or destroying bars in spinning haloes; (2) bars lose progressively less J, and their pattern speeds level off; (3) bars are smaller, and for λ ≳ 0.06 cease their growth completely following buckling; (4) bars in λ > 0.03 haloes have ratio of corotation-to-bar radii, RCR/Rb > 2, and represent so-called slow bars without offset dust lanes. We provide a quantitative analysis of J-transfer in disc-halo systems, and explain the reasons for absence of growth in fast spinning haloes and its observational corollaries. We conclude that stellar bar evolution is substantially more complex than anticipated, and bars are not as resilient as has been considered so far.

Practical guide to bar coding for patient medication safety.

PubMed

Neuenschwander, Mark; Cohen, Michael R; Vaida, Allen J; Patchett, Jeffrey A; Kelly, Jamie; Trohimovich, Barbara

2003-04-15

Bar coding for the medication administration step of the drug-use process is discussed. FDA will propose a rule in 2003 that would require bar-code labels on all human drugs and biologicals. Even with an FDA mandate, manufacturer procrastination and possible shifts in product availability are likely to slow progress. Such delays should not preclude health systems from adopting bar-code-enabled point-of-care (BPOC) systems to achieve gains in patient safety. Bar-code technology is a replacement for traditional keyboard data entry. The elements of bar coding are content, which determines the meaning; data format, which refers to the embedded data and symbology, which describes the "font" in which the machine-readable code is written. For a BPOC system to deliver an acceptable level of patient protection, the hospital must first establish reliable processes for a patient identification band, caregiver badge, and medication bar coding. Medications can have either drug-specific or patient-specific bar codes. Both varieties result in the desired code that supports patient's five rights of drug administration. When medications are not available from the manufacturer in immediate-container bar-coded packaging, other means of applying the bar code must be devised, including the use of repackaging equipment, overwrapping, manual bar coding, and outsourcing. Virtually all medications should be bar coded, the bar code on the label should be easily readable, and appropriate policies, procedures, and checks should be in place. Bar coding has the potential to be not only cost-effective but to produce a return on investment. By bar coding patient identification tags, caregiver badges, and immediate-container medications, health systems can substantially increase patient safety during medication administration.

Galaxy Zoo: secular evolution of barred galaxies from structural decomposition of multiband images

NASA Astrophysics Data System (ADS)

Kruk, Sandor J.; Lintott, Chris J.; Bamford, Steven P.; Masters, Karen L.; Simmons, Brooke D.; Häußler, Boris; Cardamone, Carolin N.; Hart, Ross E.; Kelvin, Lee; Schawinski, Kevin; Smethurst, Rebecca J.; Vika, Marina

2018-02-01

We present the results of two-component (disc+bar) and three-component (disc+bar+bulge) multiwavelength 2D photometric decompositions of barred galaxies in five Sloan Digital Sky Survey (SDSS) bands (ugriz). This sample of ∼3500 nearby (z < 0.06) galaxies with strong bars selected from the Galaxy Zoo citizen science project is the largest sample of barred galaxies to be studied using photometric decompositions that include a bar component. With detailed structural analysis, we obtain physical quantities such as the bar- and bulge-to-total luminosity ratios, effective radii, Sérsic indices and colours of the individual components. We observe a clear difference in the colours of the components, the discs being bluer than the bars and bulges. An overwhelming fraction of bulge components have Sérsic indices consistent with being pseudo-bulges. By comparing the barred galaxies with a mass-matched and volume-limited sample of unbarred galaxies, we examine the connection between the presence of a large-scale galactic bar and the properties of discs and bulges. We find that the discs of unbarred galaxies are significantly bluer compared to the discs of barred galaxies, while there is no significant difference in the colours of the bulges. We find possible evidence of secular evolution via bars that leads to the build-up of pseudo-bulges and to the quenching of star formation in the discs. We identify a subsample of unbarred galaxies with an inner lens/oval and find that their properties are similar to barred galaxies, consistent with an evolutionary scenario in which bars dissolve into lenses. This scenario deserves further investigation through both theoretical and observational work.

The Agrobacterium-mediated transformation of common wheat (Triticum aestivum L.) and triticale (x Triticosecale Wittmack): role of the binary vector system and selection cassettes.

PubMed

Bińka, Agnieszka; Orczyk, Wacław; Nadolska-Orczyk, Anna

2012-02-01

The influence of two binary vector systems, pGreen and pCAMBIA, on the Agrobacterium-mediated transformation ability of wheat and triticale was studied. Both vectors carried selection cassettes with bar or nptII driven by different promoters. Two cultivars of wheat, Kontesa and Torka, and one cultivar of triticale, Wanad, were tested. The transformation rates for the wheat cultivars ranged from 0.00 to 3.58% and from 0.00 to 6.79% for triticale. The best values for wheat were 3.58% for Kontesa and 3.14% for Torka, and these were obtained after transformation with the pGreen vector carrying the nptII selection gene under the control of 35S promoter. In the case of the bar selection system, the best transformation rates were, respectively, 1.46 and 1.79%. Such rates were obtained when the 35S::bar cassette was carried by the pCAMBIA vector; they were significantly lower with the pGreen vector. The triticale cultivar Wanad had its highest transformation rate after transformation with nptII driven by 35S in pCAMBIA. The bar selection system for the same triticale cultivar was better when the gene was driven by nos and the selection cassette was carried by pGreen. The integration of the transgenes was confirmed with at least three pairs of specific starters amplifying the fragments of nptII, bar, or gus. The expression of selection genes, measured by reverse transcriptase polymerase chain reaction (RT-PCR) in relation to the actin gene, was low, ranging from 0.00 to 0.63 for nptII and from 0.00 to 0.33 for bar. The highest relative transcript accumulation was observed for nptII driven by 35S and expressed in Kontesa that had been transformed with pGreen.

Expression of c-Fos in the rat retrosplenial cortex during instrumental re-learning of appetitive bar-pressing depends on the number of stages of previous training.

PubMed

Svarnik, Olga E; Bulava, Alexandra I; Alexandrov, Yuri I

2013-01-01

Learning is known to be accompanied by induction of c-Fos expression in cortical neurons. However, not all neurons are involved in this process. What the c-Fos expression pattern depends on is still unknown. In the present work we studied whether and to what degree previous animal experience about Task 1 (the first phase of an instrumental learning) influenced neuronal c-Fos expression in the retrosplenial cortex during acquisition of Task 2 (the second phase of an instrumental learning). Animals were progressively shaped across days to bar-press for food at the left side of the experimental chamber (Task 1). This appetitive bar-pressing behavior was shaped by nine stages ("9 stages" group), five stages ("5 stages" group) or one intermediate stage ("1 stage" group). After all animals acquired the first skill and practiced it for five days, the bar and feeder on the left, familiar side of the chamber were inactivated, and the animals were allowed to learn a similar instrumental task at the opposite side of the chamber using another pair of a bar and a feeder (Task 2). The highest number of c-Fos positive neurons was found in the retrosplenial cortex of "1 stage" animals as compared to the other groups. The number of c-Fos positive neurons in "5 stages" group animals was significantly lower than in "1 stage" animals and significantly higher than in "9 stages" animals. The number of c-Fos positive neurons in the cortex of "9 stages" animals was significantly higher than in home caged control animals. At the same time, there were no significant differences between groups in such behavioral variables as the number of entrees into the feeder or bar zones during Task 2 learning. Our results suggest that c-Fos expression in the retrosplenial cortex during Task 2 acquisition was influenced by the previous learning history.

Long-term clinical and prosthetic outcomes of soft liner and clip attachments for bar/implant overdentures: a randomised controlled clinical trial.

PubMed

ELsyad, M A; Shaheen, N H; Ashmawy, T M

2017-06-01

Long-term clinical and prosthetic outcomes of soft liner attachments for bar/implant overdentures were not sufficiently investigated. The aim of this trial was to evaluate clinical and prosthetic outcomes of resilient liner and clip attachments for bar/implant-retained mandibular overdenture after 7 years. Thirty edentulous male participants received two implants in the canine areas of the mandible. Three months later, implants were splinted with a resilient bar. Mandibular overdentures were connected to the bars with either clip (CR group, n = 15) or resilient liner (RR group, n = 15) attachments. Plaque index (PI), gingival index (GI), probing depth (PD), vertical bone loss (VBL), horizontal bone loss (HBLO) and prosthetic complications (PCs) were evaluated at denture delivery (T0), 6 (T 6m ), 12 (T1), 24 (T2), 36 (T3), 48 (T4), 60 (T5), 72 (T6) and 84 (T7) months after insertion. PI and GI increased significantly with time for CR and decreased significantly for RR (P < 0·001). PD increased at T1 (CR) and T6 m (RR) and then decreased thereafter (P < 0·05). VBL increased significantly with time in both groups (P < 0·005). HBLO increased at T2 (CR) and T1 (RR) and then decreased thereafter. CR recorded significant higher PI, GI, PD, VBLO and HBLO compared to RR at all observation times (P < 0·042). The survival rates were 96·6% and 100% for CR and RR after 7 years. The most common PCs for CR and RR were clip wears and separation of the resilient liner from the denture base, respectively. Within the limitations of this study, resilient liner attachments are recommended for bar/implant-retained mandibular overdentures than clip attachments in terms of peri-implant tissue health and prosthetic complications after 7 years. © 2017 John Wiley & Sons Ltd.

Beta-Adrenergic Receptor Expression in Muscle Cells

NASA Technical Reports Server (NTRS)

Young, Ronald B.; Bridge, K.; Vaughn, J. R.

1999-01-01

beta-adrenergic receptor (bAR) agonists presumably exert their physiological action on skeletal muscle cells through the bAR. Since the signal generated by the bAR is cyclic AMP (cAMP), experiments were initiated in primary chicken muscle cell cultures to determine if artificial elevation of intracellular cAMP by treatment with forskolin would alter the population of bAR expressed on the surface of muscle cells. Chicken skeletal muscle cells after 7 days in culture were employed for the experiments because muscle cells have attained a steady state with respect to muscle protein metabolism at this stage. Cells were treated with 0-10 uM forskolin for a total of three days. At the end of the 1, 2, and 3 day treatment intervals, the concentration of cAMP and the bAR population were measured. Receptor population was measured in intact muscle cell cultures as the difference between total binding of [H-3]CGP-12177 and non-specific binding of [H-3]CGP-12177 in the presence of 1 uM propranolol. Intracellular cAMP concentration was measured by radioimmunoassay. The concentration of cAMP in forskolin-treated cells increased up to 10-fold in a dose dependent manner. Increasing concentrations of forskolin also led to an increase in (beta)AR population, with a maximum increase of approximately 50% at 10 uM. This increase in (beta)AR population was apparent after only 1 day of treatment, and the pattern of increase was maintained for all 3 days of the treatment period. Thus, increasing the intracellular concentration of cAMP leads to up-regulation of (beta)AR population. Clenbuterol and isoproterenol gave similar effects on bAR population. The effect of forskolin on the quantity and apparent synthesis rate of the heavy chain of myosin (mhc) were also investigated. A maximum increase of 50% in the quantity of mhc was observed at 0.2 UM forskolin, but higher concentrations of forskolin reduced the quantity of mhc back to control levels.

Experimental Study on Basic Mechanical Properties of BFRP Bars

NASA Astrophysics Data System (ADS)

Fan, Xiaochun; Xu, Ting; Zhou, Zhengrong; Zhou, Xun

2017-10-01

Basalt Fiber Reinforced Polymer (BFRP) bars have the advantages of corrosion resistance, high strength, light weight, good dielectric properties, and they are new type of green reinforced alternative material. In order to determine the mechanical properties of BFRP bars, the tensile strength of basalt fiber bars was necessary to be studied. The diameters of the basalt fiber bars were compared by means of uniaxial tensile test in this article. Then the stress-strain curve can be drawn out. The results show that the stress - strain curve of BFRP bars present straight line relation, and there is no sign before failure; there is no yield platform on the stress-strain curve of BFRP bars, which are typical brittle material;the tensile strength of BFRP bars is about 3 times higher than that of ordinary steel bars. and the elastic modulus is about 1/5 of that of ordinary steel; the ultimate tensile strength of BFRP bars varies little with the increase of diameter, but there exist some differences in modulus values.

Relationships between drinking onset, alcohol use intensity, and nighttime risk behaviors in a college bar district.

PubMed

Thombs, Dennis L; O'Mara, Ryan; Tobler, Amy L; Wagenaar, Alexander C; Clapp, John D

2009-01-01

To identify antecedents of risk behavior events in college bar patrons. In this nighttime field study, self-report data and alcohol intoxication readings were collected from patrons immediately upon exiting bars (n = 618). Multilevel structural equation modeling revealed positive associations between age of drinking onset and both alcohol use intensity in the past year and recent bar-going frequency. In turn, alcohol use intensity in the past year was positively associated with bar-going frequency and intoxication at bar exit. An association between drinking onset and bar-going frequency was mediated by alcohol use intensity in the past year. Discernable paths from age of drinking onset to monthly bar-going frequency and intoxication level after leaving a bar can be identified. The results highlight the critical role of drinking onset in development of college student alcohol abuse. Research is needed to determine whether college bars are environmental pathogens mediating between genetic risk factors and patron risk behavior.

Dowel Bar Retrofit Mix Design and Specification

DOT National Transportation Integrated Search

2012-02-01

The focus of this project was on identifying critical properties that control longterm performance of repair concrete, especially rapidsetting : materials extended using pea gravel (maximum size aggregate 9.5 mm). : In the first phase of this proj...

Implant-retained mandibular bar-supported overlay dentures: a finite element stress analysis of four different bar heights.

PubMed

Rismanchian, Mansoor; Dakhilalian, Mansour; Bajoghli, Farshad; Ghasemi, Ehsan; Sadr-Eshkevari, Pooyan

2012-04-01

Proper stress distribution on dental implants is necessary in bar-retained implant overlay dentures. We aimed to comparatively assess this stress distribution according to different bar heights using finite element models. A three-dimensional (3D) computer model of mandible with 2 implants (ITI, 4.1 mm diameter and 12 mm length) in canine areas and an overlying implant-supported bar-retained overlay denture were simulated with 0-, 1-, 2-, and 3-mm bar heights using ABAQUS software. A vertical force was applied to the left first molar and gradually increased from 0 to 50 N. The resultant stress distribution was evaluated. Bars of 1 and 2 mm in height transferred the least stress to the implants (3.882 and 3.896 MPa, respectively). The 0-mm height of the bar connection transferred the highest stress value (4.277 MPa). The amount of stress transferred by 3-mm heights of the bar connection was greater than that of 1- and 2-mm bar connections and smaller than that of 0-mm bar connection (4.165 kgN). This 3D finite element analysis study suggested that the use of Dolder bar attachment with 1- and 2-mm heights could be associated with appropriate stress distribution for implant-retained overlay dentures.

Why and How the Tobacco Industry Sells Cigarettes to Young Adults: Evidence From Industry Documents

PubMed Central

Ling, Pamela M.; Glantz, Stanton A.

2002-01-01

Objectives. To improve tobacco control campaigns, we analyzed tobacco industry strategies that encourage young adults (aged 18 to 24) to smoke. Methods. Initial searches of tobacco industry documents with keywords (e.g., “young adult”) were extended by using names, locations, and dates. Results. Approximately 200 relevant documents were found. Transitions from experimentation to addiction, with adult levels of cigarette consumption, may take years. Tobacco marketing solidifies addiction among young adults. Cigarette advertisements encourage regular smoking and increased consumption by integrating smoking into activities and places where young adults' lives change (e.g., leaving home, college, jobs, the military, bars). Conclusions. Tobacco control efforts should include both adults and youths. Life changes are also opportunities to stop occasional smokers' progress to addiction. Clean air policies in workplaces, the military, bars, colleges, and homes can combat tobacco marketing. (Am J Public Health. 2002;92:908–916) PMID:12036776

Influence of agronomic variables on the composition of mate tea leaves (Ilex paraguariensis) extracts obtained from CO2 extraction at 30 degrees C and 175 bar.

PubMed

Esmelindro, Angela Aquino; Girardi, Jonathan Dos Santos; Mossi, Altemir; Jacques, Rosângela Assis; Dariva, Cláudio

2004-04-07

The aim of this work is to assess the influence of light intensity (plants with direct sun exposure and in a controlled light intensity) and age of leaves (6-24 months) on the characteristics of the extracts of mate tea leaves obtained from carbon dioxide at high pressures. Samples of mate were collected in an experiment conducted under agronomic control at Industria e Comercio de Erva-Mate Barão LTDA, Brazil. The content of selected organic compounds of the extracts was evaluated by gas chromatography together with mass spectrometry. Quantitative analysis of caffeine, theobromine, phytol, vitamin E, squalene, and stigmasterol was performed, and the results showed that field variables exert a strong influence on the liquid yield and on the chemical distribution of the extracts.

Stoichiometric control for heteroepitaxial growth of smooth ɛ-Ga2O3 thin films on c-plane AlN templates by mist chemical vapor deposition

NASA Astrophysics Data System (ADS)

Tahara, Daisuke; Nishinaka, Hiroyuki; Morimoto, Shota; Yoshimoto, Masahiro

2017-07-01

Epitaxial ɛ-Ga2O3 thin films with smooth surfaces were successfully grown on c-plane AlN templates by mist chemical vapor deposition. Using X-ray diffraction 2θ-ω and φ scans, the out-of-plane and in-plane epitaxial relationship was determined to be (0001) ɛ-Ga2O3 [10\\bar{1}0] ∥ (0001)AlN[10\\bar{1}0]. The gallium/oxygen ratio was controlled by varying the gallium precursor concentration in the solution. While scanning electron microscopy showed the presence of large grains on the surfaces of the films formed for low concentrations of oxygen species, no large grains were observed under stoichiometric conditions. Cathodoluminescence measurements showed a deep-level emission ranging from 1.55-3.7 eV; however, no band-edge emission was observed.

Thin film oxygen partial pressure sensor

NASA Technical Reports Server (NTRS)

Wortman, J. J.; Harrison, J. W.; Honbarrier, H. L.; Yen, J.

1972-01-01

The development is described of a laboratory model oxygen partial pressure sensor using a sputtered zinc oxide thin film. The film is operated at about 400 C through the use of a miniature silicon bar. Because of the unique resistance versus temperature relation of the silicon bar, control of the operational temperature is achieved by controlling the resistance. A circuit for accomplishing this is described. The response of sputtered zinc oxide films of various thicknesses to oxygen, nitrogen, argon, carbon dioxide, and water vapor caused a change in the film resistance. Over a large range, film conductance varied approximately as the square root of the oxygen partial pressure. The presence of water vapor in the gas stream caused a shift in the film conductance at a given oxygen partial pressure. A theoretical model is presented to explain the characteristic features of the zinc oxide response to oxygen.

Impregnation of Ibuprofen into Polycaprolactone using supercritical carbon dioxide

NASA Astrophysics Data System (ADS)

Yoganathan, Roshan; Mammucari, Raffaella; Foster, Neil R.

2010-03-01

Polycaprolactone (PCL) is a Food and Drug Administration (FDA) approved biodegradable polyester used in tissue engineering applications. Ibuprofen is an anti-inflammatory drug which has good solubility in supercritical CO2 (SCCO2). The solubility of CO2 in PCL allows for the impregnation of CO2-soluble therapeutic agents into the polymer via a supercritical fluid (SCF) process. Polymers impregnated with bio-active compounds are highly desired for medical implants and controlled drug delivery. In this study, the use of CO2 to impregnate PCL with ibuprofen was investigated. The effect of operating conditions on the impregnation of ibuprofen into PCL was investigated over two pressure and two temperature levels, 150bar and 200bar, 35°C and 40 °C, respectively. Polycaprolactone with drug-loadings as high as 27% w/w were obtained. Impregnated samples exhibited controlled drug release profiles over several days.

Why Buckling Stellar Bars Weaken in Disk Galaxies

NASA Astrophysics Data System (ADS)

Martinez-Valpuesta, Inma; Shlosman, Isaac

2004-09-01

Young stellar bars in disk galaxies experience a vertical buckling instability that terminates their growth and thickens them, resulting in a characteristic peanut/boxy shape when viewed edge-on. Using N-body simulations of galactic disks embedded in live halos, we have analyzed the bar structure throughout this instability and found that the outer (approximately) third of the bar dissolves completely while the inner part (within the vertical inner Lindblad resonance) becomes less oval. The bar acquires the frequently observed peanut/boxy-shaped isophotes. We also find that the bar buckling is responsible for a mass injection above the plane, which is subsequently trapped by specific three-dimensional families of periodic orbits of particular shapes explaining the observed isophotes, in line with previous work. Using a three-dimensional orbit analysis and surfaces of sections, we infer that the outer part of the bar is dissolved by a rapidly widening stochastic region around its corotation radius-a process related to the bar growth. This leads to a dramatic decrease in the bar size, decrease in the overall bar strength, and a mild increase in its pattern speed but is not expected to lead to a complete bar dissolution. The buckling instability appears primarily responsible for shortening the secular diffusion timescale to a dynamical one when building the boxy isophotes. The sufficiently long timescale of the described evolution, ~1 Gyr, can affect the observed bar fraction in the local universe and at higher redshifts, both through reduced bar strength and the absence of dust offset lanes in the bar.

Effects of the Bar Strength of Gaseous Features in Barred Galaxies

NASA Astrophysics Data System (ADS)

Kim, Woong-Tae; Seo, W.; Kim, Y.

2013-01-01

Barred galaxies commonly possess gaseous structures such as a pair of dust lanes, a nuclear ring, and nuclear spirals at their centers. We use hydrodynamic simulations to study the physical properties of the gaseous structures in barred galaxies and their relationships with the bar strength. We vary the bar mass fbar relative to the spheroidal component as well as its aspect ratio. We derive expressions for the bar strength Qb and the radius where the maximum bar torque occurs. When applied to observations, these expressions suggest that bars in real galaxies are most likely to have fbar = 0.25-0.5. Dust lanes approximately follow one of x1-orbits and tend to be more straight under a stronger and more elongated bar. A nuclear ring of a conventional x2 type forms only when the bar is not so massive or elongated. The radius of an x2-type ring is generally smaller than the inner Lindblad resonance, decreases systematically with increasing Qb, evidencing that the ring position is not determined by the resonance but by the bar strength. Nuclear spirals exist only when the ring is of the x2-type and sufficiently large in size. Unlike the other features, nuclear spirals are transient in that they start out as being tightly-wound and weak, and then due to the nonlinear effect unwind and become stronger until turning into shocks, with an unwinding rate higher for larger Qb. These results suggest that the bar strength is the primary factor that determine the properties of gaseous structures in barred galaxies.

Predictions for the $$\\bar{B}^{0}\\rightarrow \\bar{K}^{\\ast 0}$$ X(YZ) and $$\\bar{B}^{0}_{s}\\rightarrow\\phi$$ X(YZ) with X(4160), Y(3940), Z(3930)

DOE PAGES

Liang, Wei -Hong; Molina, R.; Xie, Ju -Jun; ...

2015-05-22

We investigate the decay ofmore » $$\\bar B^0 \\to \\bar K^{*0} R$$ and $$\\bar B^0_s \\to \\phi R$$ with $R$ being the $X(4160)$, $Y(3940)$, $Z(3930)$ resonances. Under the assumption that these states are dynamically generated from the vector-vector interaction, as has been concluded from several theoretical studies, we use a reaction mechanism of quark production at the elementary level, followed by hadronization of one final $$q \\bar q$$ pair into two vectors and posterior final state interaction of this pair of vector mesons to produce the resonances. With this procedure we are able to predict five ratios for these decays, which are closely linked to the dynamical nature of these states, and also predict the order of magnitude of the branching ratios which we find of the order of $$10^{-4}$$, well within the present measurable range. In order to further test the dynamical nature of these resonances we study the $$\\bar B^0_s \\to \\phi D^* \\bar D^*$$ and $$\\bar B^0_s \\to \\phi D_s^* \\bar D_s^*$$ decays close to the $$D^* \\bar D^*$$ and $$D_s^* \\bar D_s^*$$ thresholds and make predictions for the ratio of the mass distributions in these decays and the $$\\bar B^0_s \\to \\phi R$$ decay widths. In conclusion, the measurement of these decays rates can help unravel the nature of these resonances.« less

On the role of impermeable groins on barred beach morphodynamics: Example of Matalascañas beach, Spain

NASA Astrophysics Data System (ADS)

Sedrati, Mouncef; Morales González, Juan Antonio

2017-04-01

Several studies on barred beaches in settings with mesotidal to macrotidal regimes have focused on cross-shore and alongshore bar mobility. Whereas the general link between hydrodynamics, sediment transport and the response of the intertidal bars and shoreline evolution has been recognized in the literature, the role of coastal defense structures (Breakwaters, groins, seawalls) on bar-trough systems morphodynamics have received more much less attention and the field-based experimental studies of these environments are rare. The main aim of this paper is to highlight the contrasting behavior of a natural and protected barred beach under several hydrodynamics conditions. This paper presents detailed hydrodynamic and morphological data from a field experiment spanning 10 days undertaken in Matalascañas beach, a mesotidal protected vs natural barred beach in the Southern Spanish coast. This mesotidal beach experienced intense erosion in the recent past and therefore it has been partially protected by groins (protection of sea-front touristic residences). During the fieldwork, an intertidal bars in the protected and non-protected areas highlighted contrasting morphological behaviour. The non-protected barred beach shows a less pronounced bar-trough system than the protected zone. Under low energy conditions (significant wave height < 0,6m), onshore bar migration rate in the protected area was more important than the non-protected area. This migration was associated with an onshore sediment transport, resulting from the erosion of the bar's seaward slope. In the same moment, a clear longshore bar migration was observed in the non-protected zone with the absence of this process in the protected zone. During few energetic tides (Significant wave height > 1m), the protected and non-protected zones show a flattening bars processes. The findings of the present study suggest that cross-shore vs longshore bar mobility may even be mitigated by the presence of the groins, which favour onshore than longshore bar migration.

Effortful Control and Impulsivity as Concurrent and Longitudinal Predictors of Academic Achievement

ERIC Educational Resources Information Center

Valiente, Carlos; Eisenberg, Nancy; Spinrad, Tracy L.; Haugen, Rg; Thompson, Marilyn S.; Kupfer, Anne

2013-01-01

The goal of this study was to test if both effortful control (EC) and impulsivity, a reactive index of temperament, uniquely predict adolescents' academic achievement, concurrently and longitudinally (Time 1: "N" = 168, X-bar[subscript age] = 12 years). At Time 1, parents and teachers reported on students' EC and impulsivity.…

32 CFR 776.66 - Bar admission and disciplinary matters.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 5 2010-07-01 2010-07-01 false Bar admission and disciplinary matters. 776.66... ADVOCATE GENERAL Rules of Professional Conduct § 776.66 Bar admission and disciplinary matters. (a) Bar admission and disciplinary matters. A covered attorney, in connection with any application for bar admission...

Searches for Higgs boson(s) at the upgraded Tevatron

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bernardi, Gregorio; /Paris U., VI-VII /Fermilab

2005-07-01

We summarize the status of Higgs boson searches at the upgraded Fermilab Tevatron performed by the D0 and CDF collaborations. We report on three categories of searches, namely the search for the Standard Model Higgs boson (p{bar p} {yields} H, WH or ZH, with H {yields} WW* and/or H {yields} b{bar b}), the search for the minimal supersymmetric Higgs boson using p{bar p} {yields} hb{bar b} {yields} b{bar b}b{bar b} and p{bar p} {yields} hX {yields} {tau}{tau}X, and the search for doubly charged Higgs boson.

Polymorphic transformation of dense ZnO nanoparticles: Implications for chair/boat-type Peierls distortions of AB semiconductor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, S.-Y.; Shen Pouyan; Jiang Jianzhong

2004-12-08

Peierls distortion path was proved experimentally for dense ZnO nanoparticles prepared by static compression. Electron irradiation caused rock salt (R) to wurtzite (W) transition, following preferential (11-bar1){sub R}//(01-bar11){sub W}; [011]{sub R}//[1-bar21-bar3]{sub W} and then transformation strain induced (111-bar){sub R}//(1-bar011){sub W}; [011]{sub R}//[011-bar1]{sub W}. The two relationships can be rationalized by specified extent of chair- and boat-type Peierls distortions accompanied with band gap opening and intermediate {l_brace}111{r_brace}{sub R} slip for energetically favorable {l_brace}111{r_brace}{sub R}/(01-bar11){sub W} match.

Salt Bridge Formation between the I-BAR Domain and Lipids Increases Lipid Density and Membrane Curvature.

PubMed

Takemura, Kazuhiro; Hanawa-Suetsugu, Kyoko; Suetsugu, Shiro; Kitao, Akio

2017-07-28

The BAR domain superfamily proteins sense or induce curvature in membranes. The inverse-BAR domain (I-BAR) is a BAR domain that forms a straight "zeppelin-shaped" dimer. The mechanisms by which IRSp53 I-BAR binds to and deforms a lipid membrane are investigated here by all-atom molecular dynamics simulation (MD), binding energy analysis, and the effects of mutation experiments on filopodia on HeLa cells. I-BAR adopts a curved structure when crystallized, but adopts a flatter shape in MD. The binding of I-BAR to membrane was stabilized by ~30 salt bridges, consistent with experiments showing that point mutations of the interface residues have little effect on the binding affinity whereas multiple mutations have considerable effect. Salt bridge formation increases the local density of lipids and deforms the membrane into a concave shape. In addition, the point mutations that break key intra-molecular salt bridges within I-BAR reduce the binding affinity; this was confirmed by expressing these mutants in HeLa cells and observing their effects. The results indicate that the stiffness of I-BAR is important for membrane deformation, although I-BAR does not act as a completely rigid template.

Bar Evolution and Bar Properties from Disc Galaxies in the Early Universe

NASA Astrophysics Data System (ADS)

Hutchinson-Smith, Tenley; Simmons, Brooke

2017-01-01

Bars in disc galaxies indicate a large collection of stars in a specific configuration of orbits that give the galaxy center a rectangular looking feature. Astronomers have discovered that these bars affect the distribution of matter in galaxies, and are also related to galaxy stellar mass and star formation history. Little is known about the specifics of how bars evolve and drive the evolution of their host galaxies because only a handful of bars have been studied in detail so far. I have examined a sample of 8,221 barred galaxies from the early universe to identify and examine correlations with galaxy properties. The data comes from Galaxy Zoo, an online citizen science project that allows anyone to classify and measure detailed properties of galaxies. I present results including the fraction of galaxies in the sample that have bars, and the variation of galaxy properties with bar length, including galaxy color and stellar mass. I also compare these results to barred galaxies in the local universe. I will discuss the implications of these results in the context of galaxy evolution overall, including the effect of dark matter on bars and galaxy evolution.

Snack bar compositions and their acute glycaemic and satiety effects.

PubMed

Yan, Mary R; Parsons, Andrew; Whalley, Gillian A; Kelleher, John; Rush, Elaine C

Maintaining blood glucose within homeostatic limits and eating foods that sup-press hunger and promote satiety have beneficial impacts for health. This study investigated the glycaemic re-sponse and satiety effects of a serving size of a healthier snack bar, branded Nothing Else, that met the required nutrient profiling score criteria for a health claim, in comparison to two top-selling commercial snack bars. In an experimental study, 24 participants aged >=50 years were recruited. On three different days blood glucose concentration was measured twice at baseline and 15, 30, 45, 60, 90 and 120 minutes after consumption of a serving size of each bar. Satiety effects were self-reported hunger, fullness, desire to eat, and amount could eat ratings on visual analogue scales. The incremental area under the blood glucose response curve (iAUC) over two hours for the Nothing Else bar was 30% lower than commercial Bar 2 (p<0.001). At 45 minutes after eating, the Nothing Else bar induced the highest fullness rating and lowest hunger rating among the three snack bars. At two hours, fullness induced by the Nothing Else bar was twice that of Bar 2 (p=0.019), but not different to Bar 1 (p=0.212). The Nothing Else snack bar developed using the nutrient profiling scheme as a guideline, with its high protein and dietary fibre contents, had a lower glycaemic impact and induced a higher subjective satiety than the two commercial snack bars of equal weight.

An Economic Analysis of Naval Integrated vs Conventional Personnel Systems.

DTIC Science & Technology

1983-06-01

kiso, EPICS training is clustered by levels; training for subsequent levels is not administered until individual trainees demonstrate competence (and...instructional modules, JPAs, and staff support, are ccmbined with training costs. B. TBESIS COST ANALISIS 1. Asmpigi Cne of the underlying assumptions of he

Pathobiology of HIV in the Human Monocyte-Macrophage

DTIC Science & Technology

1991-10-24

of the general transcription T 1P I 1 - C machinery. In vitro analisis of PMA-inducible transcription. In itro transcription experiments were used to...inducible factoris interacts s ith associated protein is responsible. It has been established that nucleolide sequences downstream from the HIV KB site

Cobertura desarrollada de Puerto Rico

Treesearch

William A. Gould; Sebastian Martinuzzi; Olga M. Ramos Gonzalez

2008-01-01

Este mapa representa la cobertura desarrollada en Puerto Rico (Martinuzzi et al. 2007). Cobertura desarrollada se define aqui como areas urbanas, construidas y sin vegetacion, que resultan de actividad humana. Tipicamente, estas incluyen estructuras construidas, concreto, asfalto, u otra infraestructura. La cobertura desarrollada se creo mediante el analisis de...

Explaining postseismic and aseismic transient deformation in subduction zones with rate and state friction modeling constrained by lab and geodetic observations

NASA Astrophysics Data System (ADS)

Liu, Y.; Dedontney, N. L.; Rice, J. R.

2007-12-01

Rate and state friction, as applied to modeling subduction earthquake sequences, routinely predicts postseismic slip. It also predicts spontaneous aseismic slip transients, at least when pore pressure p is highly elevated near and downdip from the stability transition [Liu and Rice, 2007]. Here we address how to make such postseismic and transient predictions more fully compatible with geophysical observations. For example, lab observations can determine the a, b parameters and state evolution slip L of rate and state friction as functions of lithology and temperature and, with aid of a structural and thermal model of the subduction zone, as functions of downdip distance. Geodetic observations constrain interseismic, postseismic and aseismic transient deformations, which are controlled in the modeling by the distributions of a \\barσ and b \\barσ (parameters which also partly control the seismic rupture phase), where \\barσ = σ - p. Elevated p, controlled by tectonic compression and dehydration, may be constrained by petrologic and seismic observations. The amount of deformation and downdip extent of the slipping zone associated with the spontaneous quasi- periodic transients, as thus far modeled [Liu and Rice, 2007], is generally smaller than that observed during episodes of slow slip events in northern Cascadia and SW Japan subduction zones. However, the modeling was based on lab data for granite gouge under hydrothermal conditions because data is most complete for that case. We here report modeling based on lab data on dry granite gouge [Stesky, 1975; Lockner et al., 1986], involving no or lessened chemical interaction with water and hence being a possibly closer analog to dehydrated oceanic crust, and limited data on gabbro gouge [He et al., 2007], an expected lithology. Both data sets show a much less rapid increase of a-b with temperature above the stability transition (~ 350 °C) than does wet granite gouge; a-b increases to ~ 0.08 for wet granite at 600 °C, but to only ~ 0.01 in the dry granite and gabbro cases. We find that the lessened high-T a - b does, for the same \\barσ, modestly extend the transient slip episodes further downdip, although a majority of slip is still contributed near and in the updip rate-weakening region. However, postseismic slip, for the same \\barσ, propagates much further downdip into the rate-strengthening region. To better constrain the downdip distribution of (a - b) \\barσ, and possibly a \\barσ and L, we focus on the geodetically constrained [Hutton et al., 2001] space-time distribution of postseismic slip for the 1995 Mw = 8.0 Colima-Jalisco earthquake. This is a similarly shallow dipping subduction zone with a thermal profile [Currie et al., 2001] comparable to those that have thus far been shown to exhibit aseismic transients and non-volcanic tremor [Peacock et al., 2002]. We extrapolate the modeled 2-D postseismic slip, following a thrust earthquake with a coseismic slip similar to the 1995 event, to a spatial-temporal 3-D distribution. Surface deformation due to such slips on the thrust fault in an elastic half space is calculated and compared to that observed at western Mexico GPS stations, to constrain the above depth-variable model parameters.

One year of smokefree bars and restaurants in New Zealand: impacts and responses.

PubMed

Thomson, George; Wilson, Nick

2006-03-14

New Zealand introduced a smokefree bars and restaurants policy in December 2004. We reviewed the data available at December 2005 on the main public health, societal and political impacts and responses within New Zealand to the new law. Data were collected from publicly available survey reports, and from government departments and interviews. This included data on smoking in bars, attitudes to smokefree bars, bar patronage, socially cued smoking, and perceived rights to smokefree workplaces. The proportion of surveyed bars with smoking occurring decreased from 95% to 3% during July 2004-April 2005. Between 2004 and 2005, public support for smokefree bars rose from 56% to 69%. In the same period, support for the rights of bar workers to have smokefree workplaces rose from 81% to 91%. During the first ten months of the smokefree bars policy, there were only 196 complaints to officials about smoking in the over 9900 licensed premises. The proportion of smokers who reported that they smoked more than normal at bars, nightclubs, casinos and cafés halved between 2004 and 2005 (from 58% to 29%). Seasonally adjusted sales in bars and clubs changed little (0.6% increase) between the first three quarters of 2004 and of 2005, while café and restaurant sales increased by 9.3% in the same period. Both changes continued existing trends. Compared to the same period in 2004, average employment during the first three quarters of 2005 was up 24% for 'pubs, taverns and bars', up 9% for cafés/restaurants, and down 8% for clubs (though employment in 'pubs, taverns and bars' may have been affected by unusually high patronage around a major sports-series). The proportion of bar managers who approved of smokefree bars increased from 44% to 60% between November 2004 and May 2005. Bar managers also reported increased agreement with the rights of bar workers and patrons to smokefree environments. The main reported concerns of the national and regional Hospitality Associations, in 2005, were the perceived negative effects on rural and traditional pubs. As in other jurisdictions, the introduction of smokefree bars in New Zealand has had positive overall health protection, economic and social effects; in contrast to the predictions of opponents.

One year of smokefree bars and restaurants in New Zealand: Impacts and responses

PubMed Central

Thomson, George; Wilson, Nick

2006-01-01

Background New Zealand introduced a smokefree bars and restaurants policy in December 2004. We reviewed the data available at December 2005 on the main public health, societal and political impacts and responses within New Zealand to the new law. Methods Data were collected from publicly available survey reports, and from government departments and interviews. This included data on smoking in bars, attitudes to smokefree bars, bar patronage, socially cued smoking, and perceived rights to smokefree workplaces. Results The proportion of surveyed bars with smoking occurring decreased from 95% to 3% during July 2004 – April 2005. Between 2004 and 2005, public support for smokefree bars rose from 56% to 69%. In the same period, support for the rights of bar workers to have smokefree workplaces rose from 81% to 91%. During the first ten months of the smokefree bars policy, there were only 196 complaints to officials about smoking in the over 9900 licensed premises. The proportion of smokers who reported that they smoked more than normal at bars, nightclubs, casinos and cafés halved between 2004 and 2005 (from 58% to 29%). Seasonally adjusted sales in bars and clubs changed little (0.6% increase) between the first three quarters of 2004 and of 2005, while café and restaurant sales increased by 9.3% in the same period. Both changes continued existing trends. Compared to the same period in 2004, average employment during the first three quarters of 2005 was up 24% for 'pubs, taverns and bars', up 9% for cafés/restaurants, and down 8% for clubs (though employment in 'pubs, taverns and bars' may have been affected by unusually high patronage around a major sports-series). The proportion of bar managers who approved of smokefree bars increased from 44% to 60% between November 2004 and May 2005. Bar managers also reported increased agreement with the rights of bar workers and patrons to smokefree environments. The main reported concerns of the national and regional Hospitality Associations, in 2005, were the perceived negative effects on rural and traditional pubs. Conclusion As in other jurisdictions, the introduction of smokefree bars in New Zealand has had positive overall health protection, economic and social effects; in contrast to the predictions of opponents. PMID:16533408

F-BAR family proteins, emerging regulators for cell membrane dynamic changes-from structure to human diseases.

PubMed

Liu, Suxuan; Xiong, Xinyu; Zhao, Xianxian; Yang, Xiaofeng; Wang, Hong

2015-05-09

Eukaryotic cell membrane dynamics change in curvature during physiological and pathological processes. In the past ten years, a novel protein family, Fes/CIP4 homology-Bin/Amphiphysin/Rvs (F-BAR) domain proteins, has been identified to be the most important coordinators in membrane curvature regulation. The F-BAR domain family is a member of the Bin/Amphiphysin/Rvs (BAR) domain superfamily that is associated with dynamic changes in cell membrane. However, the molecular basis in membrane structure regulation and the biological functions of F-BAR protein are unclear. The pathophysiological role of F-BAR protein is unknown. This review summarizes the current understanding of structure and function in the BAR domain superfamily, classifies F-BAR family proteins into nine subfamilies based on domain structure, and characterizes F-BAR protein structure, domain interaction, and functional relevance. In general, F-BAR protein binds to cell membrane via F-BAR domain association with membrane phospholipids and initiates membrane curvature and scission via Src homology-3 (SH3) domain interaction with its partner proteins. This process causes membrane dynamic changes and leads to seven important cellular biological functions, which include endocytosis, phagocytosis, filopodium, lamellipodium, cytokinesis, adhesion, and podosome formation, via distinct signaling pathways determined by specific domain-binding partners. These cellular functions play important roles in many physiological and pathophysiological processes. We further summarize F-BAR protein expression and mutation changes observed in various diseases and developmental disorders. Considering the structure feature and functional implication of F-BAR proteins, we anticipate that F-BAR proteins modulate physiological and pathophysiological processes via transferring extracellular materials, regulating cell trafficking and mobility, presenting antigens, mediating extracellular matrix degradation, and transmitting signaling for cell proliferation.

50 CFR Figures 14a and 14b to Part... - Maximum Angle of Deflector Bars With Straight Bars Attached to the Bottom of the Frame and...

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Maximum Angle of Deflector Bars With Straight Bars Attached to the Bottom of the Frame and Maximum Angle of Deflector Bars With Bent Bars Attached to the Bottom of the Frame 14a Figures 14a and 14b to Part 223 Wildlife and Fisheries NATIONAL...

50 CFR Figures 14a and 14b to Part... - Maximum Angle of Deflector Bars With Straight Bars Attached to the Bottom of the Frame and...

Code of Federal Regulations, 2011 CFR

2011-10-01

... 50 Wildlife and Fisheries 9 2011-10-01 2011-10-01 false Maximum Angle of Deflector Bars With Straight Bars Attached to the Bottom of the Frame and Maximum Angle of Deflector Bars With Bent Bars Attached to the Bottom of the Frame 14a Figures 14a and 14b to Part 223 Wildlife and Fisheries NATIONAL...

Long term compliance with California's Smoke-Free Workplace Law among bars and restaurants in Los Angeles County

PubMed Central

Weber, M; Bagwell, D; Fielding, J; Glantz, S

2003-01-01

Objective: To assess long term compliance with the California Smoke-Free Workplace Law in Los Angeles County freestanding bars and bar/restaurants. Design: Population based annual site inspection survey of a random sample of Los Angeles County freestanding bars and bar/restaurants was conducted from 1998 to 2002. Main outcome measures: The primary outcomes of interest were patron and employee smoking. The secondary outcomes of interest were the presence of ashtrays and designated outdoor smoking areas. Results: Significant increases in patron non-smoking compliance were found for freestanding bars (45.7% to 75.8%, p < 0.0001) and bar/restaurants (92.2% to 98.5%, p < 0.0001) between 1998 and 2002. Increases in employee non-smoking compliance were found for freestanding bars (86.2% to 94.7%, p < 0.0003) and bar/restaurants (96.5% to 99.2%, p < 0.005). Conclusions: This study provides clear evidence that the California Smoke-Free Workplace Law has been effective at reducing patron and employee smoking in Los Angeles County bars and restaurants. Recommendations include educational campaigns targeted to freestanding bar owners and staff to counter perceptions of lost revenue, more rigorous enforcement, and more severe penalties for repeat violators such as alcohol licence revocation. Policymakers can enact smoke-free restaurant and bar policies to protect employees and patrons from secondhand smoke, confident that these laws can be successfully implemented. PMID:12958386

Research notes : keeping steel bars anchored in cracked girders.

DOT National Transportation Integrated Search

2011-01-01

Researchers at Oregon State University fabricated large-size reinforced concrete beams each with an intentional crack made by positioning a plastic sheet in the formwork when the beams were cast. By maintaining control over crack location, crack angl...

Behavior of Epoxy-Coated Textured Reinforcing Bars

DOT National Transportation Integrated Search

2018-04-01

Cracking in bridge decks is a common but difficult problem to control. Both research and experience show that the use of epoxy-coated reinforcement, which is mandated by most state departments of transportation (DOTs) for bridge decks, increases c...

An analysis on half century morphological changes in the Changjiang Estuary: Spatial variability under natural processes and human intervention

NASA Astrophysics Data System (ADS)

Zhao, Jie; Guo, Leicheng; He, Qing; Wang, Zheng Bing; van Maren, D. S.; Wang, Xianye

2018-05-01

Examination of large scale, alluvial estuarine morphology and associated time evolution is of particular importance regarding management of channel navigability, ecosystem, etc. In this work, we analyze morphological evolution and changes of the channel-shoal system in the Changjiang Estuary, a river- and tide-controlled coastal plain estuary, based on bathymetric data between 1958 and 2016. We see that its channel-shoal pattern is featured by meandering and bifurcated channels persisting over decades. In the vertical direction, hypsometry curves show that the sand bars and shoals are continuously accreted while the deep channels are eroded, leading to narrower and deeper estuarine channels. Intensive human activities in terms of reclamation, embankment, and dredging play a profound role in controlling the decadal morphological evolution by stabilizing coastlines and narrowing channels. Even though, the present Changjiang Estuary is still a pretty wide and shallow system with channel width-to-depth ratios >1000, much larger than usual fluvial rivers and small estuaries. In-depth analysis suggests that the Changjiang Estuary as a whole exhibited an overall deposition trend over 59 years, i.e., a net deposition volume of 8.3 × 108 m3. Spatially, the pan-South Branch was net eroded by 9.7 × 108 m3 whereas the mouth bar zone was net deposited by 18 × 108 m3, suggesting that the mouth bar zone is a major sediment sink. Over time there is no directional deposition or erosion trend in the interval though riverine sediment supply has decreased by 2/3 since the mid-1980s. We infer that the pan-South Branch is more fluvial-controlled therefore its morphology responds to riverine sediment load reduction fast while the mouth bar zone is more controlled by both river and tides that its morphological response lags to riverine sediment supply changes at a time scale >10 years, which is an issue largely ignored in previous studies. We argue that the time lag effect needs particular consideration in projecting future estuarine morphological changes under a low sediment supply regime and sea-level rise. Overall, the findings in this work can have implications on management of estuarine ecosystem, navigation channel and coastal flooding in general.

Evaluation of force-torque displays for use with space station telerobotic activities

NASA Technical Reports Server (NTRS)

Hendrich, Robert C.; Bierschwale, John M.; Manahan, Meera K.; Stuart, Mark A.; Legendre, A. Jay

1992-01-01

Recent experiments which addressed Space Station remote manipulation tasks found that tactile force feedback (reflecting forces and torques encountered at the end-effector through the manipulator hand controller) does not improve performance significantly. Subjective response from astronaut and non-astronaut test subjects indicated that force information, provided visually, could be useful. No research exists which specifically investigates methods of presenting force-torque information visually. This experiment was designed to evaluate seven different visual force-torque displays which were found in an informal telephone survey. The displays were prototyped in the HyperCard programming environment. In a within-subjects experiment, 14 subjects nullified forces and torques presented statically, using response buttons located at the bottom of the screen. Dependent measures included questionnaire data, errors, and response time. Subjective data generally demonstrate that subjects rated variations of pseudo-perspective displays consistently better than bar graph and digital displays. Subjects commented that the bar graph and digital displays could be used, but were not compatible with using hand controllers. Quantitative data show similar trends to the subjective data, except that the bar graph and digital displays both provided good performance, perhaps do to the mapping of response buttons to display elements. Results indicate that for this set of displays, the pseudo-perspective displays generally represent a more intuitive format for presenting force-torque information.

Structural controls on Carlin-type gold mineralization in the gold bar district, Eureka County, Nevada

USGS Publications Warehouse

Yigit, O.; Nelson, E.P.; Hitzman, M.W.; Hofstra, A.H.

2003-01-01

The Gold Bar district in the southern Roberts Mountains, 48 km northwest of Eureka, Nevada, contains one main deposit (Gold Bar), five satellite deposits, and other resources. Approximately 0.5 Moz of gold have been recovered from a resource of 1,639,000 oz of gold in Carlin-type gold deposits in lower plate, miogeoclinal carbonate rocks below the Roberts Mountains thrust. Host rocks are unit 2 of the Upper Member of the Devonian Denay Formation and the Bartine Member of the McColley Canyon Formation. Spatial and temporal relations between structures and gold mineralization indicate that both pre-Tertiary and Tertiary structures were important controls on gold mineralization. Gold mineralization occurs primarily along high-angle Tertiary normal faults, some of which are reactivated reverse faults of Paleozoic or Mesozoic age. Most deposits are localized at the intersection of northwest- and northeast-striking faults. Alteration includes decalcification, and to a lesser extent, silicification along high-angle faults. Jasperoid (pervasive silicification), which formed along most faults and in some strata-bound zones, accounts for a small portion of the ore in every deposit. In the Gold Canyon deposit, a high-grade jasperoid pipe formed along a Tertiary normal fault which was localized along a zone of overturned fault-propagation folds and thrust faults of Paleozoic or Mesozoic age.

Slowly Digestible Carbohydrate for Balanced Energy: In Vitro and In Vivo Evidence

PubMed Central

Gourineni, Vishnupriya; Stewart, Maria L.; Skorge, Rob; Sekula, Bernard C.

2017-01-01

There is growing interest among consumers in foods for sustained energy management, and an increasing number of ingredients are emerging to address this demand. The SUSTRA™ 2434 slowly digestible carbohydrate is a blend of tapioca flour and corn starch, with the potential to provide balanced energy after a meal. The aim of the study was to characterize this starch’s digestion profile in vitro (modified Englyst assay) and in vivo (intact and cecectomized rooster study), and to determine its effects on available energy, by measuring post-prandial glycemia in healthy adults (n = 14), in a randomized, double-blind, placebo-controlled, cross-over study, with two food forms: cold-pressed bar and pudding. The in vitro starch digestion yielded a high slowly digestible fraction (51%) compared to maltodextrin (9%). In the rooster digestibility model, the starch was highly digestible (94%). Consumption of slowly digestible starch (SDS), in an instant pudding or bar, yielded a significantly lower glycemic index compared to a control. At individual time points, the SDS bar and pudding yielded blood glucose levels with significantly lower values at 30–60 min and significantly higher values at 120–240 min, demonstrating a balanced energy release. This is the first study to comprehensively characterize the physiological responses to slowly digestible starch (tapioca and corn blend) in in vitro and in vivo studies. PMID:29125542

Bar quenching in gas-rich galaxies

NASA Astrophysics Data System (ADS)

Khoperskov, S.; Haywood, M.; Di Matteo, P.; Lehnert, M. D.; Combes, F.

2018-01-01

Galaxy surveys have suggested that rapid and sustained decrease in the star-formation rate (SFR), "quenching", in massive disk galaxies is frequently related to the presence of a bar. Optical and near-IR observations reveal that nearly 60% of disk galaxies in the local universe are barred, thus it is important to understand the relationship between bars and star formation in disk galaxies. Recent observational results imply that the Milky Way quenched about 9-10 Gyr ago, at the transition between the cessation of the growth of the kinematically hot, old, metal-poor thick disk and the kinematically colder, younger, and more metal-rich thin disk. Although perhaps coincidental, the quenching episode could also be related to the formation of the bar. Indeed the transfer of energy from the large-scale shear induced by the bar to increasing turbulent energy could stabilize the gaseous disk against wide-spread star formation and quench the galaxy. To explore the relation between bar formation and star formation in gas rich galaxies quantitatively, we simulated gas-rich disk isolated galaxies. Our simulations include prescriptions for star formation, stellar feedback, and for regulating the multi-phase interstellar medium. We find that the action of stellar bar efficiently quenches star formation, reducing the star-formation rate by a factor of ten in less than 1 Gyr. Analytical and self-consistent galaxy simulations with bars suggest that the action of the stellar bar increases the gas random motions within the co-rotation radius of the bar. Indeed, we detect an increase in the gas velocity dispersion up to 20-35 km s-1 at the end of the bar formation phase. The star-formation efficiency decreases rapidly, and in all of our models, the bar quenches the star formation in the galaxy. The star-formation efficiency is much lower in simulated barred compared to unbarred galaxies and more rapid bar formation implies more rapid quenching.

Morphology and spacing of river meander scrolls

NASA Astrophysics Data System (ADS)

Strick, Robert J. P.; Ashworth, Philip J.; Awcock, Graeme; Lewin, John

2018-06-01

Many of the world's alluvial rivers are characterised by single or multiple channels that are often sinuous and that migrate to produce a mosaicked floodplain landscape of truncated scroll (or point) bars. Surprisingly little is known about the morphology and geometry of scroll bars despite increasing interest from hydrocarbon geoscientists working with ancient large meandering river deposits. This paper uses remote sensing imagery, LiDAR data-sets of meandering scroll bar topography, and global coverage elevation data to quantify scroll bar geometry, anatomy, relief, and spacing. The analysis focuses on preserved scroll bars in the Mississippi River (USA) floodplain but also compares attributes to 19 rivers of different scale and depositional environments from around the world. Analysis of 10 large scroll bars (median area = 25 km2) on the Mississippi shows that the point bar deposits can be categorised into three different geomorphological units of increasing scale: individual 'scrolls', 'depositional packages', and 'point bar complexes'. Scroll heights and curvatures are greatest near the modern channel and at the terminating boundaries of different depositional packages, confirming the importance of the formative main channel on subsequent scroll bar relief and shape. Fourier analysis shows a periodic variation in signal (scroll bar height) with an average period (spacing) of 167 m (range 150-190 m) for the Mississippi point bars. For other rivers, a strong relationship exists between the period of scroll bars and the adjacent primary channel width for a range of rivers from 55 to 2042 mis 50% of the main channel width. The strength of this correlation over nearly two orders of magnitude of channel size indicates a scale independence of scroll bar spacing and suggests a strong link between channel migration and scroll bar construction with apparent regularities despite different flow regimes. This investigation of meandering river dynamics and floodplain patterns shows that it is possible to develop a suite of metrics that describe scroll bar morphology and geometry that can be valuable to geoscientists predicting the heterogeneity of subsurface meandering deposits.

Prevalence of and Differences in Salad Bar Implementation in Rural Versus Urban Arizona Schools.

PubMed

Blumenschine, Michelle; Adams, Marc; Bruening, Meg

2018-03-01

Rural children consume more calories per day on average than urban children, and they are less likely to consume fruit. Self-service salad bars have been proposed as an effective approach to better meet the National School Lunch Program's fruit and vegetable recommendations. No studies have examined how rural and urban schools differ in the implementation of school salad bars. To compare the prevalence of school-lunch salad bars and differences in implementation between urban and rural Arizona schools. Secondary analysis of a cross-sectional web-based survey. School nutrition managers (N=596) in the state of Arizona. National Center for Education Statistics locale codes defined rural and urban classifications. Barriers to salad bar implementation were examined among schools that have never had, once had, and currently have a school salad bar. Promotional practices were examined among schools that once had and currently have a school salad bar. Generalized estimating equation models were used to compare urban and rural differences in presence and implementation of salad bars, adjusting for school-level demographics and the clustering of schools within districts. After adjustment, the prevalence of salad bars did not differ between urban and rural schools (46.9%±4.3% vs 46.8%±8.5%, respectively). Rural schools without salad bars more often reported perceived food waste and cost of produce as barriers to implementing salad bars, and funding was a necessary resource for offering a salad bar in the future, as compared with urban schools (P<0.05). No other geographic differences were observed in reported salad bar promotion, challenges, or resources among schools that currently have or once had a salad bar. After adjustment, salad bar prevalence, implementation practices, and concerns are similar across geographic settings. Future research is needed to investigate methods to address cost and food waste concerns in rural areas. Copyright © 2018 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

A search for. nu. sub e appearance from stopped. pi. sup + and. mu. sup + decay at LAMPF (Los Alamos Meson Physics Facility)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fujikawa, B.K.

We report on a recent search for {bar {nu}}{sub e} appearance from stopped {pi}{sup +} {yields} {mu}{sup +}{nu}{sub {mu}} and {mu}{sup +} {yields} e{sup +}{nu}{sub e}{bar {nu}}{sub {mu}} decay made by the LAMPF experiment E645. The appearance of {bar {nu}}{sub e} may occur from {bar {nu}}{sub {mu}} {yields} {bar {nu}}{sub e}, {nu}{sub e} {yields} {bar {nu}}{sub eL}, or {nu}{sub {mu}} {yields} {bar {nu}}{sub eL} oscillations. Appearance may also occur from rare {mu}{sup +} {yields} e{sup +}{bar {nu}}{sub e}{nu}{sub {mu}} decay, which is allowed by a multiplicative lepton charge conservation law. The neutrino energies range from E{sub {nu}} = 0 tomore » 52.8MeV. The neutrino detector, which is located 26.1 meters from the neutrino source, consists of a segmented liquid scintillator and proportional drift tube central detector surrounded by both active and passive shielding. The central detector detects {bar {nu}}{sub e} through the {bar {nu}}{sub e}p {yields} ne{sup +} Charge Current (CC) reaction, which is signaled by the direct detection of the final state positron and neutron. The hydrogen-rich liquid scintillators act as free proton targets for the {bar {nu}}{sub e}p CC reaction. The neutrons are detected through radiative neutron capture on gadolinium. We find no evidence for {bar {nu}}{sub e} appearance in the first year of running. New limits on the {bar {nu}}{sub {mu}},{nu}{sub e},{nu}{sub {mu}} {yields} {bar {nu}}{sub e} oscillation parameters and the rare {mu}{sup +} {yields} e{sup +}{bar {nu}}{sub e}{nu}{sub {mu}} decay branching ratio are presented. 87 refs., 45 figs., 17 tabs.« less

The influence of bar diameter on neuromuscular strength and activation: inferences from an isometric unilateral bench press.

PubMed

Fioranelli, Douglas; Lee, C Matthew

2008-05-01

The purpose of this study was to examine the influence of two different bar diameters on neuromuscular activation and strength. The bar diameters used reflected a standard Olympic bar (28 mm (1.1 inch); THIN) and a larger fat bar (51 mm [2 inch]; THICK). Eighteen healthy men (age 25.0 +/- 1 years) were assessed for their maximal voluntary contraction (MVC) during a unilateral isometric bench press exercise with the 2 bar types at 2 different joint angles (angle 1 and angle 2; elbow joint at approximately 45 and 90 degrees , respectively). Additionally, on a separate day, subjects performed three 10-second isometric repetitions at an intensity of 80% MVC using the 2 different bars at angle 1 and angle 2. Electromyographic recordings were collected in the pectoralis major and the muscles of the forearm flexor region at a sampling rate of 1000 Hz during the second day of testing. Analysis of variance was used to examine differences in MVC between bars and also examine between bar differences in electromyographic activity for each muscle group at each joint angle. A significance level of 0.05 was used for all tests. MVC was not different between bar types, although there was a main effect of joint angle on MVC such that it was greater at angle 2. There was a main effect of bar at both angles for the forearm muscles and at angle 1 for the pectoralis such that electromyographic activity was greater with THIN. Our data do not support the hypothesis that bar diameter influences performance during an isometric bench press exercise. However, higher electromyographic activity with THIN suggests greater neuromuscular activation with a standard Olympic bar as opposed to a larger diameter "fat" bar. Although our data do not support the use of a fat bar for increasing neuromuscular activation, these findings should be confirmed in other resistance training exercises.

Location of School Lunch Salad Bars and Fruit and Vegetable Consumption in Middle Schools: A Cross-Sectional Plate Waste Study.

PubMed

Adams, Marc A; Bruening, Meg; Ohri-Vachaspati, Punam; Hurley, Jane C

2016-03-01

The school lunch environment is a prime target for increasing a child's consumption of fresh fruits and vegetables (F/V). Salad bars are heavily encouraged in schools; however, more research is needed to examine the contexts in which salad bars promote consumption of F/V among students. To compare the amount of fresh F/V self-served, consumed, and wasted by students during lunch at schools with differing salad bar placement: inside or outside of the serving line. Cross-sectional plate waste study in which salad bar placement differed between schools. A random sample of middle school students (N=533) from six schools (three schools per district). Amount of fresh F/V taken, consumed, and wasted. Negative binomial multivariable regression examined placement of salad bars, adjusting for sex, grade, race/ethnicity, free/reduced status, day of the week, and nesting of students within schools. Almost all students (98.6%) in the schools with salad bars inside serving lines self-served F/V compared with only 22.6% of students in the schools with salad bars outside lines (adjusted prevalence ratio=5.38; 95% CI 4.04 to 7.17). Similarly, students at schools with salad bars inside the line had greater prevalence of consuming any F/V compared with students in schools with salad bars outside the line (adjusted prevalence ratio=4.83; 95% CI 3.40 to 6.81). On average, students with the salad bar outside the line wasted less F/V compared with those with salad bars inside the line (30% vs 48%, respectively). Few students visited salad bars located outside the lunch line. Salad bars inside the lunch line resulted in significantly greater fresh F/V taken, consumed, and wasted. When possible, schools should try to include salad bars inside the line to increase students' exposure to F/V. Copyright © 2016 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

The tropical water and energy cycles in a cumulus ensemble model. Part 1: Equilibrium climate

NASA Technical Reports Server (NTRS)

Sui, C. H.; Lau, K. M.; Tao, W. K.; Simpson, J.

1994-01-01

A cumulus ensemble model is used to study the tropical water and energy cycles and their role in the climate system. The model includes cloud dynamics, radiative processes, and microphysics that incorporate all important production and conversion processes among water vapor and five species of hydrometeors. Radiative transfer in clouds is parameterized based on cloud contents and size distributions of each bulk hydrometeor. Several model integrations have been carried out under a variety of imposed boundary and large-scale conditions. In Part 1 of this paper, the primary focus is on the water and heat budgets of the control experiment, which is designed to simulate the convective - radiative equilibrium response of the model to an imposed vertical velocity and a fixed sea surface temperature at 28 C. The simulated atmosphere is conditionally unstable below the freezing level and close to neutral above the freezing level. The equilibrium water budget shows that the total moisture source, M(sub s), which is contributed by surface evaporation (0.24 M(sub s)) and the large-scale advection (0.76 M(sub s)), all converts to mean surface precipitation bar-P(sub s). Most of M(sub s) is transported verticaly in convective regions where much of the condensate is generated and falls to surface (0.68 bar-P(sub s)). The remaining condensate detrains at a rate of 0.48 bar-P(sub s) and constitutes 65% of the source for stratiform clouds above the melting level. The upper-level stratiform cloud dissipates into clear environment at a rate of 0.14 bar-P(sub s), which is a significant moisture source comparable to the detrained water vapor (0.15 bar-P(sub s)) to the upper troposphere from convective clouds. In the lower troposphere, stratiform clouds evaporate at a rate of 0.41 bar-P(sub s), which is a more dominant moisture source than surface evaporation (0.22 bar-P(sub s)). The precipitation falling to the surface in the stratiform region is about 0.32 bar-P(sub s). The associated latent heating in the water cycle is the dominant source in the heat budget that generates a net upward motion in convective regions, upper stratiform regions (above the freezing level), and a downward motion in the lower stratiform regions. The budgets reveal a cycle of water and energy resulted from radiation-dynamic-convection interactions that maintain equilibrium of the atmosphere.

Phosphatidylinositol 4,5-Bisphosphate (PtdIns(4,5)P2) Specifically Induces Membrane Penetration and Deformation by Bin/Amphiphysin/Rvs (BAR) Domains*

PubMed Central

Yoon, Youngdae; Zhang, Xiuqi; Cho, Wonhwa

2012-01-01

Cellular proteins containing Bin/amphiphysin/Rvs (BAR) domains play a key role in clathrin-mediated endocytosis. Despite extensive structural and functional studies of BAR domains, it is still unknown how exactly these domains interact with the plasma membrane containing phosphatidylinositol 4,5-bisphosphate (PtdIns(4,5)P2) and whether they function by a universal mechanism or by different mechanisms. Here we report that PtdIns(4,5)P2 specifically induces partial membrane penetration of the N-terminal amphiphilic α-helix (H0) of two representative N-BAR domains from Drosophila amphiphysin (dAmp-BAR) and rat endophilin A1 (EndoA1-BAR). Our quantitative fluorescence imaging analysis shows that PtdIns(4,5)P2-dependent membrane penetration of H0 is important for self-association of membrane-bound dAmp-BAR and EndoA1-BAR and their membrane deformation activity. EndoA1-BAR behaves differently from dAmp-BAR because the former has an additional amphiphilic α-helix that penetrates the membrane in a PtdIns(4,5)P2-independent manner. Depletion of PtdIns(4,5)P2 from the plasma membrane of HEK293 cells abrogated the membrane deforming activity of EndoA1-BAR and dAmp-BAR. Collectively, these studies suggest that the local PtdIns(4,5)P2 concentration in the plasma membrane may regulate the membrane interaction and deformation by N-BAR domain-containing proteins during clathrin-mediated endocytosis. PMID:22888025

Characterizing bars in low surface brightness disc galaxies

NASA Astrophysics Data System (ADS)

Peters, Wesley; Kuzio de Naray, Rachel

2018-05-01

In this paper, we use B-band, I-band, and 3.6 μm azimuthal light profiles of four low surface brightness galaxies (LSBs; UGC 628, F568-1, F568-3, F563-V2) to characterize three bar parameters: length, strength, and corotation radius. We employ three techniques to measure the radius of the bars, including a new method using the azimuthal light profiles. We find comparable bar radii between the I-band and 3.6 μm for all four galaxies when using our azimuthal light profile method, and that our bar lengths are comparable to those in high surface brightness galaxies (HSBs). In addition, we find the bar strengths for our galaxies to be smaller than those for HSBs. Finally, we use Fourier transforms of the B-band, I-band, and 3.6 μm images to characterize the bars as either `fast' or `slow' by measuring the corotation radius via phase profiles. When using the B- and I-band phase crossings, we find three of our galaxies have faster than expected relative bar pattern speeds for galaxies expected to be embedded in centrally dense cold dark matter haloes. When using the B-band and 3.6 μm phase crossings, we find more ambiguous results, although the relative bar pattern speeds are still faster than expected. Since we find a very slow bar in F563-V2, we are confident that we are able to differentiate between fast and slow bars. Finally, we find no relation between bar strength and relative bar pattern speed when comparing our LSBs to HSBs.

LEAP 1992: Conference summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dover, C.B.

1992-12-01

We present a summary of the many new results in antiproton ({bar p}) physics presented at the LEAP `92 conference, in the areas of meson spectroscopy, {bar N}N scattering, annihilation and spin observables, strangeness and charm production, {bar N} annihilation in nuclei, atomic physics with very low energy {bar p}`s, the exploration of fundamental symmetries and interactions with {bar p} (CP, T, CPT, gravitation), and the prospects for new {bar p} facilities at ultralow energies or energies above the LEAR regime ({ge} 2 GeV/c).

LEAP 1992: Conference summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dover, C.B.

1992-12-01

We present a summary of the many new results in antiproton ([bar p]) physics presented at the LEAP '92 conference, in the areas of meson spectroscopy, [bar N]N scattering, annihilation and spin observables, strangeness and charm production, [bar N] annihilation in nuclei, atomic physics with very low energy [bar p]'s, the exploration of fundamental symmetries and interactions with [bar p] (CP, T, CPT, gravitation), and the prospects for new [bar p] facilities at ultralow energies or energies above the LEAR regime ([ge] 2 GeV/c).

DD-bar production and their interactions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu Yanrui; Oka, Makoto; Takizawa, Makoto

2011-05-23

We have explored the bound state problem and the scattering problem of the DD-bar pair in a meson exchange model. When considering their production in the e{sup +}e{sup -} process, we included the DD-bar rescattering effect. Although it is difficult to answer whether the S-wave DD-bar bound state exists or not from the binding energies and the phase shifts, one may get an upper limit of the binding energy from the production of the BB-bar, the bottom analog of DD-bar.

An Investigation of Certain Thermodynamic Losses in Miniature Cryocoolers

DTIC Science & Technology

2007-05-02

system Channel Measurement Parameter Sensor Gain Offset 1 Pressure in Volume A Endevco 2.408 bar/V 6.0206 bar 2 Pressure in Volume C Druck 200...1.9677 bar/V 15.444 bar 3 N/C 4 Pressure in compressor body Druck 820 6.0046 bar/V 8.3174 bar 5 Piston Position Sch’ LVDT 2.0884 mm/V -5.5968 mm...probe (courtesy of Prof. Moriyoshi). Left: 3D view showing two fine thermocouples are in a cross configuration. Right: Side elevation Results

Application of smart BFRP bars with distributed fiber optic sensors into concrete structures

NASA Astrophysics Data System (ADS)

Tang, Yongsheng; Wu, Zhishen; Yang, Caiqian; Wu, Gang; Zhao, Lihua; Song, Shiwei

2010-04-01

In this paper, the self-sensing and mechanical properties of concrete structures strengthened with a novel type of smart basalt fiber reinforced polymer (BFRP) bars were experimentally studied, wherein the sensing element is Brillouin scattering-based distributed optical fiber sensing technique. First, one of the smart bars was applied to strengthen a 2m concrete beam under a 4-points static loading manner in the laboratory. During the experiment, the bar can measure the inner strain changes and monitor the randomly distributed cracks well. With the distributed strain information along the bar, the distributed deformation of the beam can be calculated, and the structural health can be monitored and evaluated as well. Then, two smart bars with a length of about 70m were embedded into a concrete airfield pavement reinforced by long BFRP bars. In the field test, all the optical fiber sensors in the smart bars survived the whole concrete casting process and worked well. From the measured data, the concrete cracks along the pavement length can be easily monitored. The experimental results also confirmed that the bars can strengthen the structures especially after the yielding of steel bars. All the results confirm that this new type of smart BFRP bars show not only good sensing performance but also mechanical performance in the concrete structures.

Moisture sorption curves of fruit and nut cereal bar prepared with sugar and sugar substitutes.

PubMed

Pallavi, Byrappa Vasu; Chetana, Ramakrishna; Ravi, Ramaswamy; Reddy, Sunkireddy Yella

2015-03-01

Low sugar, low fat, dry fruit and nut cereal bars without sugar were prepared using cereals, nuts, and sugar substitutes. The sorption characteristics of the bars prepared with sugar substitutes in comparison with that of sugar were studied by keeping the bars at water activity (aw) from 0.1 to 0.9. The sorption isotherms of low sugar bars were practically identical below aw of 0.5 but above aw of 0.5, a clear differentiation in the isotherms could be observed compared to that of sugar counterpart. A sharp increase in moisture content was observed in the bars prepared with alternative sweeteners, above aw 0.6, whereas a gradual increase in aw was observed in the case of bar prepared with sugar. The ERH (Equilibrium relative humidity) value for bar with sugar was 50 %, and for bars prepared with alternative sweeteners, it was about 60 %. Low sugar cereal bar prepared with sorbitol + maltitol (SM) syrup scored higher sensory quality compared to other product prepared with sorbitol + nutriose (SN) as the former retained softness and chewiness on storage. Thus, it was observed that bars with alternative sweeteners will be more stable as their ERH is closer to normal ambient conditions compared to that prepared with sugar.

Pectus bar removal: surgical technique and strategy to avoid complications.

PubMed

Park, Hyung Joo; Kim, Kyung Soo

2016-01-01

Pectus bar removal is the final stage of the procedure for minimally invasive repair of pectus excavatum. Based on our experience with one of the largest scale data, we would like to address the important issues in pectus bar removal, such as appropriate duration of bar maintenance, techniques for bar removal, and strategies to avoid complications. Between September 1999 and August 2015, we operated on 2,553 patients with pectus excavatum and carinatum using pectus bars for a minimally invasive approach. Among them, 1,821 patients (71.3%) underwent pectus bar removal as a final stage of pectus deformity repair, and their data were analyzed retrospectively to identify the outcomes and adverse effects of the pectus bar removal procedure. The mean age of the patients was 9.13 years (range, 16 months to 44 years) and the male to female ratio was 3.55. The study is approved by the Institutional Review Board (IRB), the ethical committee of Seoul St. Mary's Hospital. The IRB has exempted the informed consent from every patient in this study due to this is a retrospective chart review without revealing any patients' personal data. Our technique involved straightening of the bar in a supine position. The overall mean duration of pectus bar maintenance was 2.57 years (range, 4 months to 14 years). The mean duration was 2.02 years (range, 4 months to 7 years) for children under 12 years, 2.99 years (range, 7 months to 9 years) for teenagers aged 12-20 years, and 3.53 years (range, 3 months to 14 years) for adults over 20 years. Forty-eight patients (2.6%) underwent bar removal more than 5 years after bar insertion and 58 patients (3.2%) underwent bar removal earlier than initially planned. The most common adverse reaction after bar removal was wound seroma including infection (43 patients, 2.36%). Recurrence after bar removal occurred in nine patients (0.49%), and seven of these required redo repair (0.38%). Pectus bar removal is a safe and straightforward procedure with a low rate of complication.

HCN(1-0) enhancement in the bar of NGC 2903

NASA Astrophysics Data System (ADS)

Leon, S.; Jeyakumar, S.; Pérez-Ramírez, D.; Verdes-Montenegro, L.; Lee, S. W.; Ocaña Flaquer, B.

2008-12-01

We have mapped the HCN(1-0) emission from two spiral galaxies, NGC 2903 and NGC 3504 to study the gas properties in the bars. The HCN(1-0) emission is detected in the center and along the bar of NGC 2903. The line ratio HCN(1-0)/ 12CO(1-0) ranges from 0.07 to 0.12 with the lowest value in the center. The enhancement of HCN(1-0) emission along the bar indicates a higher fraction of dense molecular gas in the bar than at the center. The mass of dense molecular gas in the center (2.2 × 107 M⊙) is about 6 times lower than that in the bar (1.2 × 108 M⊙). The total star formation rate (SFR) is estimated to be 1.4 M⊙ yr-1, where the SFR at the center is 1.9 times higher than that in the bar. The time scale of consumption of the dense molecular gas in the center is about ~ 3 × 107 yr which is much shorter than that in the bar of about 2 to 10 × 108 yr. The dynamical time scale of inflow of the gas from the bar to the center is shorter than the consumption time scale in the bar, which suggests that the star formation (SF) activity at the center is not deprived of fuel. In the bar, the fraction of dense molecular gas mass relative to the total molecular gas mass is twice as high along the leading edge than along the central axis of the bar. The HCN(1-0) emission has a large velocity dispersion in the bar, which can be attributed partially to the streaming motions indicative of shocks along the bar. In NGC 3504, the HCN(1-0) emission is detected only at the center. The fraction of dense molecular gas mass in the center is about 15%. Comparison of the SFR with the predictions from numerical simulations suggest that NGC 2903 harbors a young type B bar with a strong inflow of gas toward the center whereas NGC 3504 has an older bar and has already passed the phase of inflow of gas toward the center.

Pectus bar removal: surgical technique and strategy to avoid complications

PubMed Central

Kim, Kyung Soo

2016-01-01

Background Pectus bar removal is the final stage of the procedure for minimally invasive repair of pectus excavatum. Based on our experience with one of the largest scale data, we would like to address the important issues in pectus bar removal, such as appropriate duration of bar maintenance, techniques for bar removal, and strategies to avoid complications. Methods Between September 1999 and August 2015, we operated on 2,553 patients with pectus excavatum and carinatum using pectus bars for a minimally invasive approach. Among them, 1,821 patients (71.3%) underwent pectus bar removal as a final stage of pectus deformity repair, and their data were analyzed retrospectively to identify the outcomes and adverse effects of the pectus bar removal procedure. The mean age of the patients was 9.13 years (range, 16 months to 44 years) and the male to female ratio was 3.55. The study is approved by the Institutional Review Board (IRB), the ethical committee of Seoul St. Mary’s Hospital. The IRB has exempted the informed consent from every patient in this study due to this is a retrospective chart review without revealing any patients’ personal data. Results Our technique involved straightening of the bar in a supine position. The overall mean duration of pectus bar maintenance was 2.57 years (range, 4 months to 14 years). The mean duration was 2.02 years (range, 4 months to 7 years) for children under 12 years, 2.99 years (range, 7 months to 9 years) for teenagers aged 12–20 years, and 3.53 years (range, 3 months to 14 years) for adults over 20 years. Forty-eight patients (2.6%) underwent bar removal more than 5 years after bar insertion and 58 patients (3.2%) underwent bar removal earlier than initially planned. The most common adverse reaction after bar removal was wound seroma including infection (43 patients, 2.36%). Recurrence after bar removal occurred in nine patients (0.49%), and seven of these required redo repair (0.38%). Conclusions Pectus bar removal is a safe and straightforward procedure with a low rate of complication. PMID:29078488

Preliminary assessment of channel stability and bed-material transport in the Tillamook Bay tributaries and Nehalem River basin, northwestern Oregon

USGS Publications Warehouse

Jones, Krista L.; Keith, Mackenzie K.; O'Connor, Jim E.; Mangano, Joseph F.; Wallick, J. Rose

2012-01-01

This report summarizes a preliminary study of bed-material transport, vertical and lateral channel changes, and existing datasets for the Tillamook (drainage area 156 square kilometers [km2]), Trask (451 km2), Wilson (500 km2), Kilchis (169 km2), Miami (94 km2), and Nehalem (2,207 km2) Rivers along the northwestern Oregon coast. This study, conducted in coopera-tion with the U.S. Army Corps of Engineers and Oregon Department of State Lands to inform permitting decisions regarding instream gravel mining, revealed that: * Study areas along the six rivers can be divided into reaches based on tidal influence and topography. The fluvial (nontidal or dominated by riverine processes) reaches vary in length (2.4-9.3 kilometer [km]), gradient (0.0011-0.0075 meter of elevation change per meter of channel length [m/m]), and bed-material composition (a mixture of alluvium and intermittent bedrock outcrops to predominately alluvium). In fluvial reaches, unit bar area (square meter of bar area per meter of channel length [m2/m]) as mapped from 2009 photographs ranged from 7.1 m2/m on the Tillamook River to 27.9 m2/m on the Miami River. * In tidal reaches, all six rivers flow over alluvial deposits, but have varying gradients (0.0001-0.0013 m/m) and lengths affected by tide (1.3-24.6 km). The Miami River has the steepest and shortest tidal reach and the Nehalem River has the flattest and longest tidal reach. Bars in the tidal reaches are generally composed of sand and mud. Unit bar area was greatest in the Tidal Nehalem Reach, where extensive mud flats flank the lower channel. * Background factors such as valley and channel confinement, basin geology, channel slope, and tidal extent control the spatial variation in the accumulation and texture of bed material. Presently, the Upper Fluvial Wilson and Miami Reaches and Fluvial Nehalem Reach have the greatest abundance of gravel bars, likely owing to local bed-material sources in combination with decreasing channel gradient and valley confinement. * Natural and human-caused disturbances such as mass movements, logging, fire, channel modifications for navigation and flood control, and gravel mining also have varying effects on channel condition, bed-material transport, and distribution and area of bars throughout the study areas and over time. * Existing datasets include at least 16 and 18 sets of aerial and orthophotographs that were taken of the study areas in the Tillamook Bay tributary basins and Nehalem River basin, respectively, from 1939 to 2011. These photographs are available for future assessments of long-term changes in channel condition, bar area, and vegetation establishment patterns. High resolution Light Detection And Ranging (LiDAR) surveys acquired in 2007-2009 could support future quantitative analyses of channel morphology and bed-material transport in all study areas. * A review of deposited and mined gravel volumes reported for instream gravel mining sites shows that bed-material deposition tends to rebuild mined bar surfaces in most years. Mean annual deposition volumes on individual bars exceeded 3,000 cubic meters (m3) on Donaldson Bar on the Wilson River, Dill Bar on the Kilchis River, and Plant and Winslow Bars on the Nehalem River. Cumulative reported volumes of bed-material deposition were greatest at Donaldson and Dill Bars, totaling over 25,000 m3 per site from 2004 to 2011. Within this period, reported cumulative mined volumes were greatest for the Donaldson, Plant, and Winslow Bars, ranging from 24,470 to 33,940 m3. * Analysis of historical stage-streamflow data collected by the U.S. Geological Survey on the Wilson River near Tillamook (14301500) and Nehalem River near Foss (14301000) shows that these rivers have episodically aggraded and incised, mostly following high flow events, but they do not exhibit systematic, long-term trends in bed elevation. * Multiple cross sections show that channels near bridge crossings in all six study areas are dynamic with many subject to incision and aggradation as well as lateral shifts in thalweg position and bank deposition and erosion. * In fluvial reaches, unit bar area declined a net 5.3-83.6 percent from 1939 to 2009. The documented reduction in bar area may be attributable to several factors, including vegetation establishment and stabilization of formerly active bar surfaces, lateral channel changes and resulting alterations in sediment deposition and erosion patterns, and streamflow and/or tide differences between photographs. Other factors that may be associated with the observed reduction in bar area but not assessed in this reconnaissance level study include changes in the sediment and hydrology regimes of these rivers over the analysis period. * In tidal reaches, unit bar area increased on the Tillamook and Nehalem Rivers (98.0 and 14.7 percent, respectively), but declined a net 24.2 to 83.1 percent in the other four tidal reaches. Net increases in bar area in the Tidal Tillamook and Nehalem Reaches were possibly attributable to tidal differences between the photographs as well as sediment deposition behind log booms and pile structures on the Tillamook River between 1939 and 1967. * The armoring ratio (ratio of the median grain sizes of a bar's surface and subsurface layers) was 1.6 at Lower Waldron Bar on the Miami River, tentatively indicating a relative balance between transport capacity and sediment supply at this location. Armoring ratios, however, ranged from 2.4 to 5.5 at sites on the Trask, Wilson, Kilchis, and Nehalem Rivers; these coarse armor layers probably reflect limited bed-material supply at these sites. * On the basis of mapping results, measured armoring ratios, and channel cross section surveys, preliminary conclusions are that the fluvial reaches on the Tillamook, Trask, Kilchis, and Nehalem Rivers are currently sediment supply-limited in terms of bed material - that is, the transport capacity of the channel generally exceeds the supply of bed material. The relation between transport capacity and sediment is more ambiguous for the fluvial reaches on the Wilson and Miami Rivers, but transport-limited conditions are likely for at least parts of these reaches. Some of these reaches have possibly evolved from sediment supply-limited to transport-limited over the last several decades in response to changing basin and climate conditions. * Because of exceedingly low gradients, all the tidal reaches are transport-limited. Bed material in these reaches, however, is primarily sand and finer grain-size material and probably transported as suspended load from upstream reaches. These reaches will be most susceptible to watershed conditions affecting the supply and transport of fine sediment. * Compared to basins on the southwestern Oregon coast, such as the Chetco and Rogue River basins, these six basins likely transport overall less gravel bed material. Although tentative in the absence of actual transport measurements, this conclusion is supported by the much lower area and frequency of bars and longer tidal reaches along all the northcoast rivers examined in this study. * Previous studies suggest that the expansive and largely unvegetated bars visible in the 1939 photographs are primarily associated with voluminous sedimentation starting soon after the first Tillamook Burn fire in 1933. However, USGS studies of temporal bar trends in other Oregon coastal rivers unaffected by the Tillamook Burn show similar declines in bar area over approximately the same analysis period. In the Umpqua and Chetco River basins, historical declines in bar area are associated with long-term decreases in flood magnitude. Other factors may include changes in the type and volume of large wood and riparian vegetation. Further characterization of hydrology patterns in these basins and possible linkages with climate factors related to flood peaks, such as the Pacific Decadal Oscillation, could support inferences of expected future changes in vegetation establishment and channel planform and profile. * More detailed investigations of bed-material transport rates and channel morphology would support assessments of lateral and vertical channel condition and longitudinal trends in bed material. Such assessments would be most practical for the fluvial study areas on the Wilson, Kilchis, Miami, and Nehalem Rivers and relevant to several ongoing management and ecological issues pertaining to sand and gravel transport. Tidal reaches may also be logical subjects for indepth analysis where studies would be more relevant to the deposition and transport of fine sediment (and associated channel and riparian conditions and processes) rather than coarse bed material.

Long-term Sediment Accumulation in Mid-channel Bars of the Upper Reach of the Lower Mississippi River.

NASA Astrophysics Data System (ADS)

Wang, B.; Xu, Y. J.

2016-02-01

A recent study reported that about 44% of the total Mississippi River suspended load reaching the Old River Control Structure (ORCS) was trapped upstream of the Gulf of Mexico by overbank storage and channel bed aggradation. Considering an average annual sediment load of 120 million metric tons passing ORCS to the Mississippi River main channel, the trapped sediment load would be equivalent to annually rebuilding 44-km2 coastal land of 1 meter in depth, assuming a sedimentation bulk density of 1.2 tons m-3. No study has yet demonstrated such a high sediment accumulation rate within the confined river channel or on a floodplain area that surrounds the only unleeved stretch ( 30-km long) of the Lower Mississippi River downstream of ORCS. In this study, we utilized satellite images taken from 1983 to 2013 and analyzed changes in surface area of nine major mid-channel and point bars over a 130-km river reach from ORCS to Baton Rouge. Using river stage records and the estimated surface areas, we developed a stage - surface area rating curve for each of the bars and estimated changes in bar volume over time. We found that more than half of the bars have grown, while the others have shrunken in the past three decades. As a whole, there was a substantial net gain of surface area and volume accretion. Sediment trapping was most prevalent during the spring floods, especially during the period from 2007 to 2011 when two large floods occurred. This paper presents the channel morphological change and sediment accumulation rates under different flow conditions, and discusses their implications for the current understanding and practices of the Mississippi River sediment diversion.

Involuntary smoking in the restaurant workplace. A review of employee exposure and health effects.

PubMed

Siegel, M

1993-07-28

To determine the relative exposure to environmental tobacco smoke for bar and restaurant employees compared with office employees and with nonsmokers exposed in the home (part 1) and to determine whether this exposure is contributing to an elevated lung cancer risk in these employees (part 2). MEDLINE and bibliographies from identified publications. In part 1, published studies of indoor air quality were included if they reported a mean concentration of carbon monoxide, nicotine, or particulate matter from measurements taken in one or more bars, restaurants, offices, or residences with at least one smoker. In part 2, published epidemiologic studies that reported a risk estimate for lung cancer incidence or mortality in food-service workers were included if they controlled, directly or indirectly, for active smoking. In part 1, a weighted average of the mean concentration of carbon monoxide, nicotine, and respirable suspended particulates reported in studies was calculated for bars, restaurants, offices, and residences. In part 2, the relative lung cancer risk for food-service workers compared with that for the general population was examined in the six identified studies. Levels of environmental tobacco smoke in restaurants were approximately 1.6 to 2.0 times higher than in office workplaces of other businesses and 1.5 times higher than in residences with at least one smoker. Levels in bars were 3.9 to 6.1 times higher than in offices and 4.4 to 4.5 times higher than in residences. The epidemiologic evidence suggested that there may be a 50% increase in lung cancer risk among food-service workers that is in part attributable to tobacco smoke exposure in the workplace. Environmental tobacco smoke is a significant occupational health hazard for food-service workers. To protect these workers, smoking in bars and restaurants should be prohibited.

Does Alcohol Contribute to College Men’s Sexual Assault Perpetration? Between-and Within-Person Effects Over Five Semesters

PubMed Central

Testa, Maria; Cleveland, Michael J.

2017-01-01

Objective: The current longitudinal study was designed to consider the time-varying effects of men’s heavy episodic drinking (HED) and drinking setting attendance on college sexual assault perpetration. Method: Freshman men (N = 992) were recruited in their first semester and completed online measures at the end of their first five semesters. Using multilevel models, we examined whether men with higher frequency HED (or party or bar attendance) were more likely to perpetrate sexual assault (between-person, Level 2 effect) and whether sexual assault perpetration was more likely in semesters in which HED (or party or bar attendance) was higher than each individual’s average (within-person, Level 1 effect). Results: The between-person effect of HED on sexual assault was not significant after accounting for the between-person effects of antisocial behavior, impersonal sex orientation, and low self-control. The within-person effect of HED on sexual assault perpetration was not significant. However, models substituting frequency of party attendance or bar attendance revealed both between- and within-person effects. The odds of sexual assault were increased for men with higher bar and party attendance than the sample as a whole, and in semesters in which party or bar attendance was higher than their own average. Supplemental analyses suggested that these drinking setting effects were explained by hookups, with sexual assault perpetration more likely in semesters in which the number of hookups exceeded one’s own average. Conclusions: Findings point toward the importance of drinking contexts, rather than drinking per se, as predictors of college men’s sexual assault perpetration. PMID:27936357

Evaluation of Smoke-Free Policies in Seven Cities in China: Longitudinal Findings from the ITC China Project (2007–2012)

PubMed Central

Fong, Geoffrey T.; Sansone, Genevieve; Yan, Mi; Craig, Lorraine; Quah, Anne C.K.; Jiang, Yuan

2015-01-01

Background China is the world’s largest consumer of tobacco, with hundreds of millions of people exposed daily to secondhand smoke (SHS). Comprehensive smoke-free policies are the only effective way to protect the population from the harms of SHS. China does not have a comprehensive national smoke-free law but some local-level regulations have been implemented. Objective To evaluate local level smoke-free regulations across seven cities in China by measuring the prevalence of smoking in public places (workplaces, restaurants, and bars), and support for smoke-free policies over time. Methods Data were from Waves 2 to 4 of the International Tobacco Control (ITC) China Survey (2007–2012), a face-to-face cohort survey of approximately 800 smokers in each of seven cities in mainland China. Multivariate logistic regression models estimated with GEE were used to test the changes in variables over time. Results As of 2012, over three-quarters of respondents were exposed to smoking in bars; more than two-thirds were exposed to smoking in restaurants and more than half were exposed to smoking in indoor workplaces. Small decreases in the prevalence of smoking were found overall from Wave 2 to Wave 4 for indoor workplaces, restaurants, and bars; although the decline was minimal for bars. Support for complete smoking bans increased over time for each venue, although it was lowest for bars. Conclusions Existing partial smoking bans across China have had minimal impact on reducing smoking in public places. A strongly enforced, comprehensive national smoke-free law is urgently needed in order to achieve greater public health gains. PMID:26407720

Quantitative microbial risk assessment for Escherichia coli O157:H7, salmonella, and Listeria monocytogenes in leafy green vegetables consumed at salad bars.

PubMed

Franz, E; Tromp, S O; Rijgersberg, H; van der Fels-Klerx, H J

2010-02-01

Fresh vegetables are increasingly recognized as a source of foodborne outbreaks in many parts of the world. The purpose of this study was to conduct a quantitative microbial risk assessment for Escherichia coli O157:H7, Salmonella, and Listeria monocytogenes infection from consumption of leafy green vegetables in salad from salad bars in The Netherlands. Pathogen growth was modeled in Aladin (Agro Logistics Analysis and Design Instrument) using time-temperature profiles in the chilled supply chain and one particular restaurant with a salad bar. A second-order Monte Carlo risk assessment model was constructed (using @Risk) to estimate the public health effects. The temperature in the studied cold chain was well controlled below 5 degrees C. Growth of E. coli O157:H7 and Salmonella was minimal (17 and 15%, respectively). Growth of L. monocytogenes was considerably greater (194%). Based on first-order Monte Carlo simulations, the average number of cases per year in The Netherlands associated the consumption leafy greens in salads from salad bars was 166, 187, and 0.3 for E. coli O157:H7, Salmonella, and L. monocytogenes, respectively. The ranges of the average number of annual cases as estimated by second-order Monte Carlo simulation (with prevalence and number of visitors as uncertain variables) were 42 to 551 for E. coli O157:H7, 81 to 281 for Salmonella, and 0.1 to 0.9 for L. monocytogenes. This study included an integration of modeling pathogen growth in the supply chain of fresh leafy vegetables destined for restaurant salad bars using software designed to model and design logistics and modeling the public health effects using probabilistic risk assessment software.

Homogeneity and Entropy

NASA Astrophysics Data System (ADS)

Tignanelli, H. L.; Vazquez, R. A.; Mostaccio, C.; Gordillo, S.; Plastino, A.

1990-11-01

RESUMEN. Presentamos una metodologia de analisis de la homogeneidad a partir de la Teoria de la Informaci6n, aplicable a muestras de datos observacionales. ABSTRACT:Standard concepts that underlie Information Theory are employed in order design a methodology that enables one to analyze the homogeneity of a given data sample. Key : DATA ANALYSIS

Bar code, good for industry and trade--how does it benefit the dentist?

PubMed

Oehlmann, H

2001-10-01

Every dentist who attentively follows the change in product labelling can easily see that the HIBC bar code is on the increase. In fact, according to information from FIDE/VDDI and ADE/BVD, the dental industry and trade are firmly resolved to apply the HIBC bar code to all products used internationally in dental practices. Why? Indeed, at first it looks like extra expense to additionally print a bar code on the packages. Good reasons can only lie in advantages which manufacturers and the trade expect from the HIBC bar code, Indications in dental technician circles are that the HIBC bar code is coming. If there are advantages, what are these, and can the dentist also profit from them? What does HIBC bar code mean and what items of interest does it include? What does bar code cost and does only one code exist? This is explained briefly, concentrating on the benefits bar code can bring for different users.

Finite element modelling of concrete beams reinforced with hybrid fiber reinforced bars

NASA Astrophysics Data System (ADS)

Smring, Santa binti; Salleh, Norhafizah; Hamid, NoorAzlina Abdul; Majid, Masni A.

2017-11-01

Concrete is a heterogeneous composite material made up of cement, sand, coarse aggregate and water mixed in a desired proportion to obtain the required strength. Plain concrete does not with stand tension as compared to compression. In order to compensate this drawback steel reinforcement are provided in concrete. Now a day, for improving the properties of concrete and also to take up tension combination of steel and glass fibre-reinforced polymer (GFRP) bars promises favourable strength, serviceability, and durability. To verify its promise and support design concrete structures with hybrid type of reinforcement, this study have investigated the load-deflection behaviour of concrete beams reinforced with hybrid GFRP and steel bars by using ATENA software. Fourteen beams, including six control beams reinforced with only steel or only GFRP bars, were analysed. The ratio and the ordinate of GFRP to steel were the main parameters investigated. The behaviour of these beams was investigated via the load-deflection characteristics, cracking behaviour and mode of failure. Hybrid GFRP-Steel reinforced concrete beam showed the improvement in both ultimate capacity and deflection concomitant to the steel reinforced concrete beam. On the other hand, finite element (FE) modelling which is ATENA were validated with previous experiment and promising the good result to be used for further analyses and development in the field of present study.

[Influence of sterilization treatments on continuous carbon-fiber reinforced polyolefin composite].

PubMed

Guan, Shi-bing; Hou, Chun-lin; Chen, Ai-min; Zhang, Wei; Wang, Ji-e

2007-08-21

To evaluate the influence of sterilization treatment on continuous carbon-fiber reinforced polyolefin composite (CFRP) so as to provide experimental reference for selection of sterilization method for CFRP. Seventy bars of CFRP were divided into 7 equal groups to undergo sterilization by autoclave, 2% glutaraldehyde soaking, 75% alcohol soaking, ethylene oxide sterilization, and Co-60 gamma ray irradiation of the dosages 11 kGy, 25 kGy, and 18 kGy respectively, and another 10 bars were used as blank controls. Then the bars underwent three-point bending test and longitudinal compression test so as to measure the biomechanical changes after sterilization treatment, including the maximum load, ultimate strength, and elastic modulus. Three-point bending test showed that the levels of maximum load of the all experimental groups were lower than that of the control group, however, only those of the 3 Co-60 irradiation groups were significantly lower than that of the control group and that Co-60 radiation lowered the level of maximum load dose-dependently; and that the levels of ultimate strength of all the all experimental groups were lower than that of the control group, however, only those of the 3 Co-60 groups were significantly lower than that of the control group and that the higher the dosage of Co-60 radiation the lower the level of ultimate strength, however, not dose-dependently. The elastic modulus of the Co-60 25 KGy group was significantly higher than that of the control group, and there was no significant difference in the level of ultimate strength among the other groups. Longitudinal compression test showed that the levels of maximum load and ultimate strength of the 3 Co-60 irradiation groups, autoclave group, and circular ethylene groups were significantly lower than that of the control group, and there was no significant difference in elastic modulus among different groups. During sterilized package of CFRP products produced in quantity autoclave sterilization and Co-60 gamma ray irradiation sterilization should be avoided. Ethylene oxide is proposed as the best sterilization method. If gamma ray irradiation is to be used further technology improvement is necessary.

$${{\\bar{d}} - {\\bar{u}}}$$ Flavor Asymmetry in the Proton in Chiral Effective Field Theory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Salamu, Y.; Ji, Cheung-Ryong; Melnitchouk, Wally

2015-09-01

Themore » $${\\bar d - \\bar u}$$ flavor asymmetry in the proton arising from pion loops is computed using chiral effective field theory. calculation includes both nucleon and Δ intermediate states, and uses both the fully relativistic and heavy baryon frameworks. x dependence of $${\\bar d - \\bar u}$$ extracted from the Fermilab E866 Drell–Yan data can be well reproduced in terms of a single transverse momentum cutoff parameter regulating the ultraviolet behavior of the loop integrals. In addition to the distribution at x > 0, corrections to the integrated asymmetry from zero momentum contributions are computed, which arise from pion rainbow and bubble diagrams at x = 0. These have not been accounted for in previous analyses, and can make important contributions to the lowest moment of $${\\bar d-\\bar u}$$ .« less

The Stability Of Disk Barred Galaxies Over the Past 7 Billion Years

NASA Astrophysics Data System (ADS)

Tapia, Amauri; Simmons, Brooke

2017-01-01

A recently released model of interacting disk galaxies provides a hypothesis for the origins of off center bars in disks. No systematic search for offset bars in the early universe has yet been undertaken. The Galaxy Zoo project has produced data regarding the large-scale bars of many galaxies. Using this data alongside images collected by the Hubble Space Telescope and other sources, we have examined 5190 galaxies for signatures of off-centered bars. Less than 5 percent of the sample shows clear signs of an offset bar. We describe their overall properties of this sub-sample and compare the properties of galaxies with offset bars to those with centered bars. We assess the feasibility of the proposed model and place these galaxies in the context of the overall evolution of galaxies.

An anatomical study of the pterygospinous bar and foramen of Civinini.

PubMed

Goyal, Neeru; Jain, Anjali

2016-10-01

The pterygospinous ligament extends from the posterior free margin of the lateral pterygoid plate till the spine of the sphenoid. The ligament may ossify partly or completely leading to the formation of the pterygospinous bar. A complete ossification of the ligament results in the formation of the foramen of Civinini. Presence of the complete or incomplete pterygospinous bar may lead to a difficulty in passing the needle during anaesthesia for the trigeminal neuralgia or the bar may also compress the mandibular nerve and its branches to cause lingual numbness, pain and speech impairment. Presence of the complete or incomplete pterygospinous bar and the foramen of Civinini were studied in 55 dried adult skulls and 20 sphenoid bones. Partial or complete ossification of the pterygospinous ligament was seen in 17.33 % skulls. One skull showed the presence of bilateral complete pterygospinous bar while another skull had the unilateral complete pterygospinous bar on right side. Two skulls and one sphenoid had bilateral incomplete pterygospinous bar while seven skulls and one sphenoid bone had unilateral incomplete pterygospinous bar. In three cases, the bar was passing just below the foramen ovale. The pterygospinous bar when present medial to the foramen ovale may not have much clinical significance but when the bar is present just below the foramen ovale, it may cause a compression of the mandibular nerve and its branches and may also obstruct the passage for the transoval approach to the neighbouring regions.

Modelling and Model-Based-Designed PID Control of the JT-60SA Cryogenic System Using the Simcryogenics Library

NASA Astrophysics Data System (ADS)

Bonne, F.; Bonnay, P.; Hoa, C.; Mahoudeau, G.; Rousset, B.

2017-02-01

This papers deals with the Japan Torus-60 Super Advanced fusion experiment JT-60SA cryogenic system. A presentation of the JT-60SA cryogenic system model, from 300K to 4.4K -using the Matlab/Simulink/Simscape Simcryogenics library- will be given. As a first validation of our modelling strategy, the obtained operating point will be compared with the one obtained from HYSYS simulations. In the JT60-SA tokamak, pulsed heat loads are expected to be coming from the plasma and must be handled properly, using both appropriate refrigerator architecture and appropriate control model, to smooth the heat load. This paper presents model-based designed PID control schemes to control the helium mass inside the phase separator. The helium mass inside the phase separator as been chosen to be the variable of interest in the phase separator since it is independent of the pressure which can vary from 1 bar to 1.8 bar during load smoothing. Dynamics simulations will be shown to assess the legitimacy of the proposed strategy. This work is partially supported through the French National Research Agency (ANR), task agreement ANR-13-SEED-0005.

Tracking control of a closed-chain five-bar robot with two degrees of freedom by integration of an approximation-based approach and mechanical design.

PubMed

Cheng, Long; Hou, Zeng-Guang; Tan, Min; Zhang, W J

2012-10-01

The trajectory tracking problem of a closed-chain five-bar robot is studied in this paper. Based on an error transformation function and the backstepping technique, an approximation-based tracking algorithm is proposed, which can guarantee the control performance of the robotic system in both the stable and transient phases. In particular, the overshoot, settling time, and final tracking error of the robotic system can be all adjusted by properly setting the parameters in the error transformation function. The radial basis function neural network (RBFNN) is used to compensate the complicated nonlinear terms in the closed-loop dynamics of the robotic system. The approximation error of the RBFNN is only required to be bounded, which simplifies the initial "trail-and-error" configuration of the neural network. Illustrative examples are given to verify the theoretical analysis and illustrate the effectiveness of the proposed algorithm. Finally, it is also shown that the proposed approximation-based controller can be simplified by a smart mechanical design of the closed-chain robot, which demonstrates the promise of the integrated design and control philosophy.

Mode-locked solid state lasers using diode laser excitation

DOEpatents

Holtom, Gary R [Boston, MA

2012-03-06

A mode-locked laser employs a coupled-polarization scheme for efficient longitudinal pumping by reshaped laser diode bars. One or more dielectric polarizers are configured to reflect a pumping wavelength having a first polarization and to reflect a lasing wavelength having a second polarization. An asymmetric cavity provides relatively large beam spot sizes in gain medium to permit efficient coupling to a volume pumped by a laser diode bar. The cavity can include a collimation region with a controlled beam spot size for insertion of a saturable absorber and dispersion components. Beam spot size is selected to provide stable mode locking based on Kerr lensing. Pulse durations of less than 100 fs can be achieved in Yb:KGW.

Development of a novel low-radiation-absorbent lok-bar to reduce X-ray scattering and absorption in RapidArc® treatment planning and dose delivery.

PubMed

Monzen, Hajime; Kubo, Kazuki; Tamura, Mikoto; Hayakawa, Masaru; Nishimura, Yasumasa

2017-05-01

We developed a novel low-radiation-absorbent lok-bar (HM-bar) that is used to secure the immobilizers to the couch. The aim of this study was to investigate the X-ray scattering and absorption properties of the HM-bar in computed tomography (CT) simulation and radiotherapy dose delivery using the Varian Exact™ lok-bar (VL-bar) as a benchmark. CT images were obtained with or without lok-bar, and then each image was visually evaluated for artifacts. The attenuation rates for each lok-bar were measured using a farmer-type ionization chamber (PTW30013) and the I'mRT phantom (IBA Dosimetry GmbH). Measurement points were between gantry angles of 110 and 180°. The treatment apparatus was a NovalisTx (Brainlab AG); X-ray energies were set at 6 MV and 10 MV. In the presence of each lok-bar, the radiation dose was measured in accordance with 10 volumetric modulated arc therapy-stereotactic body radiation therapy (VMAT-SBRT) plans for lung cancer. Artifacts were seldom observed in the CT scans of the HM-bar. The attenuation rate of each lok-bar was higher when the X-ray energy was set at 6 MV than at 10 MV. The highest attenuation rate in the VL-bar was observed at a gantry angle of 112°; the rates were 22.4% at 6 MV and 19.3% at 10 MV. Similarly, the highest attenuation rate for the HM-bar was also observed at a gantry angle of 112°; the rates were 12.2% and 10.1% at 6 MV and 10 MV, respectively. When the VL-bar was evaluated, the isocenter dose of the VMAT-SBRT plans was attenuated by 2.6% as a maximum case. In the case of the HM-bar, the maximum attenuation was 1.4%. In the measurements of each VMAT-SBRT plan, the difference of the dose attenuation rate between the VL-bar and HM-bar was approximately 1%. The HM-bar could be used to minimize the occurrence of artifacts and provide good images in CT scans regarding radiotherapy planning and dose calculation. It can be used for patient therapy at hospitals to provide accurate dose delivery because of its low X-ray scattering and absorption characteristics. © 2017 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.

Effects of bilateral swing-away grab bars on the biomechanics of stand-to-sit and sit-to-stand toilet transfers.

PubMed

Lee, Su Jin; Mehta-Desai, Ricky; Oh, Kyunggeune; Sanford, Jon; Prilutsky, Boris I

2018-03-09

Kinetic characteristics of transfers to and from a toilet performed using bilateral grab bars are not fully quantified to inform grab bar design and configuration. The purpose of this study was to (1) determine effects of bilateral swing-away grab bars on peaks of ankle, knee and hip joint moments during grab bar assisted stand-to-sit and sit-to-stand transfers; and (2) determine effects of three different heights and widths of swing-away grab bars on the same kinetic characteristics. Healthy subjects (N = 11, age 25-58 years) performed stand-to-sit and sit-to-stand transfers with and without grab bars. In transfers with grab bars, 9 grab bar configurations were tested by varying their height from the floor (0.787 m, 0.813 m, 0.838 m; 31″-33″) and width, the distance of each grab bar from the toilet's centerline (0.330 m, 0.356 m, 0.381 m; 13″-15″). Motion capture, force plate and inverse dynamics analysis were used to determine lower limb joint moments. The use of bilateral grab bars generally reduced the peak magnitude of extension moments at lower limb joints during stand-to-sit and sit-to-stand transfers (p < .05), except the ankle joint moments during stand-to-sit transfers. Relatively few differences in peak joint moments were found between studied grab bar widths or heights. The obtained results suggest that the studied ranges of grab bar configurations reduce moment demands on the leg joints and thus decrease difficulty and required lower limb muscle effort to perform the transfers. Implications for Rehabilitation Maximizing the benefits of assistive technology in the built environment requires a careful assessment of their spatial and configurational dimensions, especially in respect to the needs and abilities of the intended users. Examining the kinetic characteristics of transfers to and from a toilet using the swing-away grab bars is useful for informing grab bar design and configuration recommendations for assisted living and skilled nursing facilities. Our findings suggest that the swing-away grab bars located at certain ranges are a reasonable alternative to the grab bars mandated by the current Americans with Disabilities Act (ADA) Accessibility Guidelines. Future research investigating the effects of grab bars on transfer performance should consider additional factors, such as a wider range of abilities and transfer methods of the users.

A campaign to reduce impaired driving through retail-oriented enforcement in Washington State

DOT National Transportation Integrated Search

2008-04-01

The Washington State Liquor Control Board (WSLCB) launched its DUI Reduction Program in 2002 with the immediate goal of reducing sales to intoxicated people through enforcement directed at bars and restaurants. The program targets those establishment...

Technological Enhancements for Personal Computers

DTIC Science & Technology

1992-03-01

quicker order processing , shortening the time required to obtain critical spare parts. 31 Customer service and spare parts tracking are facilitated by...cards speed up order processing and filing. Bar code readers speed inventory control processing. D. DEPLOYMENT PLANNING. Many units with high mobility

25 CFR 542.8 - What are the minimum internal control standards for pull tabs?

Code of Federal Regulations, 2011 CFR

2011-04-01

... microchip reader, the reader shall be tested periodically to determine that it is correctly reading the bar code or microchip. (iii) If the electronic equipment returns a voucher or a payment slip to the player...

The e{sup +}e{sup -}{yields}J/{psi}DD-bar, J/{psi}DD-bar* reactions with dynamically generated resonances

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gamermann, D.; Oset, E.

2008-08-31

In two recent reactions by Belle producing DD-bar and DD-bar* meson pairs, peaks above threshold have been measured in the differential cross sections, possibly indicating new resonances in these channels. We want to study such reactions from the point of view that the D meson pairs are produced from already known or predicted resonances below threshold. Our study shows that the peak in the DD-bar* production is not likely to be caused by the X(3872) resonance, but the peak seen in DD-bar invariant mass can be well described if the DD-bar pair comes from the already predicted scalar X(3700) resonance.

'Lager, lager shouting': the role of music and DJs in nightclub disorder control.

PubMed

Forsyth, Alasdair J M

2009-01-01

This paper explores how music and music genre can govern the nightlife experience, specifically how a nightclub's music policy can impact on clientele, health behaviours, bar sales and levels of disorder. Participant observations were conducted in sample of eight city centre nightclubs in Glasgow, Scotland. Music policy was found to influence nightclubs' clientele and their behaviours, for example in relation to differences in levels of alcohol or illegal drug use, sexual activity and violence between venues. Further, within individual venues, music policy was also observed operating as a crowd control tool, with for example such entertainment being used in alcohol marketing, in 'soft policing' and in the temporal management of patrons' movements. This research acknowledges the centrality of the DJ in implementing these controls. It is clear that music is a central component of the Nighttime Economy. Despite this, to date music has tended to play 'second fiddle' to sex and drugs within Club Health research. From this research it is recommended that music policy be incorporated into responsible bar server training packages.

Sexual behaviour among casual workers in an international nightlife resort: a case control study

PubMed Central

Hughes, Karen; Bellis, Mark A

2006-01-01

Background Young holidaymakers report increased sexual risk-taking abroad, yet little is currently known about the sexual behaviour of those who extend time abroad through casual work. Methods Information on sexual behaviour was collected via an anonymous questionnaire administered to British bar and nightclub workers in Ibiza (cases, n = 92) and British people visiting Ibiza for holiday purposes only (controls, n = 868). Results Four in five (80.5%) cases who arrived in Ibiza without a partner had sex during their stay and of these two thirds (65.5%) had unprotected sex. Cases were more likely to report sexual risk-taking in Ibiza than controls and reported greater numbers of sexual partners prior to their visit. However, they had fewer sexual partners per week of stay. Conclusion Casual workers in bars and nightclubs abroad are a key risk group for sexual health and a potential conduit for the international spread of sexually transmitted infections. While they are an important target group for sexual health promotion, appropriately trained they are also ideally placed to deliver sexual health interventions to other young travellers. PMID:16504040

Antisocial violent offenders with attention deficit hyperactivity disorder demonstrate akathisia-like hyperactivity in three-channel actometry.

PubMed

Tuisku, Katinka; Virkkunen, Matti; Holi, Matti; Lauerma, Hannu; Naukkarinen, Hannu; Rimon, Ranan; Wahlbeck, Kristian

2003-01-01

Actometry enables quantitative and qualitative analysis of various hyperactivity disorders. Antisocial violent offenders have demonstrated diurnal increases in motor activity that may be related to attention deficit hyperactivity disorder (ADHD) that often precedes antisocial development. Motor restlessness in ADHD has common features with neuroleptic-induced akathisia. In this study, three-channel actometry was used to compare 15 antisocial violent offenders who had a history of ADHD with 15 healthy control subjects and 10 akathisia patients. The Barnes Akathisia Rating Scale (BARS) was used for clinical evaluation of akathisia symptoms. Ankle movement indices and the ankle-waist ratio differentiated the antisocial patients from the healthy controls significantly, with no overlap, and the same parameters expectedly differentiated the akathisia patients from the healthy controls. The repetitive, rhythmic pattern of akathisia was found in 13 of the 15 antisocial patients. Nine of the antisocial patients scored 2 or 3 (mild to moderate akathisia) on the BARS. Thus, the motor hyperactivity of antisocial ADHD patients has common features with mild akathisia. This may be due to a common hypodopaminergic etiology of ADHD and akathisia.

Cultural Factors Related to Smoking in San Francisco's Irish Bars

ERIC Educational Resources Information Center

Satterlund, Travis D.; Antin, Tamar M. J.; Lee, Juliet P.; Moore, Roland S.

2009-01-01

California's Smoke-Free Workplace Act was extended to include bars in 1998. While the majority of bars in the state have become smoke free, in many bars patrons and staff continue to smoke despite the law. The authors present findings from a study which assessed cultural factors related to continued smoking in bars in the city of San Francisco. In…

A young person's game: immersion and distancing in bar work.

PubMed

Conway, Thomas; MacNeela, Pádraig

2012-01-01

Previous research indicates that bar workers report high levels of alcohol consumption, but the bar work experience itself has been little studied as a means to understand health threats associated with this job role. The subjective experience and meaning of bar work was explored in this study by interviewing current and ex-bar workers from a district in an Irish city that had a high density of bars and busy tourism industry. A total of 12 participants took part in focus groups (FGs) and seven in individual interviews. Four themes were identified in a thematic analysis. The central depiction of bar work was of an initial immersion in an intensive lifestyle characterised by heavy drinking, with subsequent distancing from the extremes of the lifestyle. The participants affiliated strongly with the bar work occupational identity, which included alcohol use in group scenarios for drinking during work, after work and on time off. The bar work lifestyle was most intense in the 'superpub' environment, characterised by permissive staff drinking norms and reported stress. Although an important identity, bar work was ultimately a transient role. The findings are considered in relation to research on occupation-specific stress and alcohol use, social identity and developmental needs in young adulthood.

Bars in Field and Cluster Galaxies at Intermediate Redshifts

NASA Astrophysics Data System (ADS)

Barazza, F. D.; Jablonka, P.; Ediscs Collaboration

2009-12-01

We present the first study of large-scale bars in clusters at intermediate redshifts (z=0.4-0.8). We compare the properties of the bars and their host galaxies in the clusters with those of a field sample in the same redshift range. We use a sample of 945 moderately inclined disk galaxies drawn from the EDisCS project. The morphological classification of the galaxies and the detection of bars are based on deep HST/ACS F814W images. The total optical bar fraction in the redshift range z=0.4-0.8, averaged over the entire sample, is 25%. This is lower than found locally, but in good agreement with studies of bars in field environments at intermediate redshifts. For the cluster and field subsamples, we measure bar fractions of 24% and 29%, respectively. In agreement with local studies, we find that disk-dominated galaxies have a higher bar fraction than bulge-dominated galaxies. We also find, based on a small subsample, that bars in clusters are on average longer than in the field and preferentially found close to the cluster center, where the bar fraction is somewhat higher than at larger distances.

Two-wave photon Doppler velocimetry measurements in direct impact Hopkinson pressure bar experiments

NASA Astrophysics Data System (ADS)

Lea, Lewis J.; Jardine, Andrew P.

2015-09-01

Direct impact Hopkinson pressure bar systems offer many potential advantages over split Hopkinson pressure bars, including access to higher strain rates, higher strains for equivalent striker velocity and system length, lower dispersion and faster achievement of force equilibrium. Currently advantages are gained at a significant cost: the fact that input bar data is unavailable removes all information about the striker impacted specimen face, preventing the determination of force equilibrium, and requiring approximations to be made on the sample deformation history. Recently photon Doppler velocimetry methods have been developed, which can replace strain gauges on Hopkinson bars. In this paper we discuss an experimental method and complementary data analysis for using Doppler velocimetry to measure surface velocities of the striker and output bars in a direct impact bar experiment, allowing similar data to be recorded as in a split bar system, with the same level of convenience. We discuss extracting velocity and force measurements, and improving the accuracy and convenience of Doppler velocimetry on Hopkinson bars. Results obtained using the technique are compared to equivalent split bar tests, showing improved stress measurements for the lowest and highest strains.

Search for the Standard Model Higgs Boson in ZH → v$$\\bar{v}$$b$$\\bar{b}$$ channel in p$$\\bar{p}$$ collisions at √s= 1.96 TeV

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dubey, Abhinav

2011-01-01

A search for the standard model Higgs boson is performed in 5.2 fb -1 of pmore » $$\\bar{p}$$ collisions at p √s = 1.96 TeV, collected with the DØ detector at the Fermilab Tevatron. The final state considered is a pair of b jets with large missing transverse energy, as expected from p$$\\bar{p}$$→ ZH → v$$\\bar{v}$$b$$\\bar{b}$$ production. The search is also sensitive to the WH → ℓvb$$\\bar{b}$$ channel, where the charged lepton is not identified. Boosted decision trees are used to discriminate signal from background. Good agreement is observed between data and expected backgrounds, and, for a Higgs-boson mass of 115 GeV, a limit is set at 95% C.L. on the cross section multiplied by branching fraction of (p$$\\bar{p}$$ → (Z/W)H) × (H → b$$\\bar{b}$$) that is a factor 4.57 expected and 3.73 observed larger than the value expected from the standard model.« less

Measurements of t t bar cross sections in association with b jets and inclusive jets and their ratio using dilepton final states in pp collisions at √{ s } = 13TeV

NASA Astrophysics Data System (ADS)

Sirunyan, A. M.; Tumasyan, A.; Adam, W.; Asilar, E.; Bergauer, T.; Brandstetter, J.; Brondolin, E.; Dragicevic, M.; Erö, J.; Flechl, M.; Friedl, M.; Frühwirth, R.; Ghete, V. M.; Hörmann, N.; Hrubec, J.; Jeitler, M.; König, A.; Krätschmer, I.; Liko, D.; Matsushita, T.; Mikulec, I.; Rabady, D.; Rad, N.; Rohringer, H.; Schieck, J.; Strauss, J.; Waltenberger, W.; Wulz, C.-E.; Chekhovsky, V.; Mossolov, V.; Suarez Gonzalez, J.; Shumeiko, N.; Alderweireldt, S.; De Wolf, E. A.; Janssen, X.; Lauwers, J.; Van De Klundert, M.; Van Haevermaet, H.; Van Mechelen, P.; Van Remortel, N.; Van Spilbeeck, A.; Abu Zeid, S.; Blekman, F.; D'Hondt, J.; De Bruyn, I.; De Clercq, J.; Deroover, K.; Lowette, S.; Moortgat, S.; Moreels, L.; Olbrechts, A.; Python, Q.; Skovpen, K.; Tavernier, S.; Van Doninck, W.; Van Mulders, P.; Van Parijs, I.; Brun, H.; Clerbaux, B.; De Lentdecker, G.; Delannoy, H.; Fasanella, G.; Favart, L.; Goldouzian, R.; Grebenyuk, A.; Karapostoli, G.; Lenzi, T.; Luetic, J.; Maerschalk, T.; Marinov, A.; Randle-conde, A.; Seva, T.; Vander Velde, C.; Vanlaer, P.; Vannerom, D.; Yonamine, R.; Zenoni, F.; Zhang, F.; Cimmino, A.; Cornelis, T.; Dobur, D.; Fagot, A.; Gul, M.; Khvastunov, I.; Poyraz, D.; Salva, S.; Schöfbeck, R.; Tytgat, M.; Van Driessche, W.; Verbeke, W.; Zaganidis, N.; Bakhshiansohi, H.; Bondu, O.; Brochet, S.; Bruno, G.; Caudron, A.; De Visscher, S.; Delaere, C.; Delcourt, M.; Francois, B.; Giammanco, A.; Jafari, A.; Komm, M.; Krintiras, G.; Lemaitre, V.; Magitteri, A.; Mertens, A.; Musich, M.; Piotrzkowski, K.; Quertenmont, L.; Vidal Marono, M.; Wertz, S.; Beliy, N.; Aldá Júnior, W. L.; Alves, F. L.; Alves, G. A.; Brito, L.; Hensel, C.; Moraes, A.; Pol, M. E.; Rebello Teles, P.; Belchior Batista Das Chagas, E.; Carvalho, W.; Chinellato, J.; Custódio, A.; Da Costa, E. M.; Da Silveira, G. G.; De Jesus Damiao, D.; Fonseca De Souza, S.; Huertas Guativa, L. M.; Malbouisson, H.; Mora Herrera, C.; Mundim, L.; Nogima, H.; Santoro, A.; Sznajder, A.; Tonelli Manganote, E. J.; Torres Da Silva De Araujo, F.; Vilela Pereira, A.; Ahuja, S.; Bernardes, C. A.; Fernandez Perez Tomei, T. R.; Gregores, E. M.; Mercadante, P. G.; Moon, C. S.; Novaes, S. F.; Padula, Sandra S.; Romero Abad, D.; Ruiz Vargas, J. C.; Aleksandrov, A.; Hadjiiska, R.; Iaydjiev, P.; Rodozov, M.; Stoykova, S.; Sultanov, G.; Vutova, M.; Dimitrov, A.; Glushkov, I.; Litov, L.; Pavlov, B.; Petkov, P.; Fang, W.; Gao, X.; Ahmad, M.; Bian, J. G.; Chen, G. M.; Chen, H. S.; Chen, M.; Chen, Y.; Jiang, C. H.; Leggat, D.; Liu, Z.; Romeo, F.; Shaheen, S. M.; Spiezia, A.; Tao, J.; Wang, C.; Wang, Z.; Yazgan, E.; Zhang, H.; Zhao, J.; Ban, Y.; Chen, G.; Li, Q.; Liu, S.; Mao, Y.; Qian, S. J.; Wang, D.; Xu, Z.; Avila, C.; Cabrera, A.; Chaparro Sierra, L. F.; Florez, C.; González Hernández, C. F.; Ruiz Alvarez, J. D.; Godinovic, N.; Lelas, D.; Puljak, I.; Ribeiro Cipriano, P. M.; Sculac, T.; Antunovic, Z.; Kovac, M.; Brigljevic, V.; Ferencek, D.; Kadija, K.; Mesic, B.; Susa, T.; Ather, M. W.; Attikis, A.; Mavromanolakis, G.; Mousa, J.; Nicolaou, C.; Ptochos, F.; Razis, P. A.; Rykaczewski, H.; Finger, M.; Finger, M.; Carrera Jarrin, E.; Abdelalim, A. A.; Mohammed, Y.; Salama, E.; Dewanjee, R. K.; Kadastik, M.; Perrini, L.; Raidal, M.; Tiko, A.; Veelken, C.; Eerola, P.; Pekkanen, J.; Voutilainen, M.; Härkönen, J.; Järvinen, T.; Karimäki, V.; Kinnunen, R.; Lampén, T.; Lassila-Perini, K.; Lehti, S.; Lindén, T.; Luukka, P.; Tuominen, E.; Tuominiemi, J.; Tuovinen, E.; Talvitie, J.; Tuuva, T.; Besancon, M.; Couderc, F.; Dejardin, M.; Denegri, D.; Faure, J. L.; Ferri, F.; Ganjour, S.; Ghosh, S.; Givernaud, A.; Gras, P.; Hamel de Monchenault, G.; Jarry, P.; Kucher, I.; Locci, E.; Machet, M.; Malcles, J.; Rander, J.; Rosowsky, A.; Sahin, M. Ö.; Titov, M.; Abdulsalam, A.; Antropov, I.; Baffioni, S.; Beaudette, F.; Busson, P.; Cadamuro, L.; Chapon, E.; Charlot, C.; Davignon, O.; Granier de Cassagnac, R.; Jo, M.; Lisniak, S.; Lobanov, A.; Miné, P.; Nguyen, M.; Ochando, C.; Ortona, G.; Paganini, P.; Pigard, P.; Regnard, S.; Salerno, R.; Sirois, Y.; Stahl Leiton, A. G.; Strebler, T.; Yilmaz, Y.; Zabi, A.; Zghiche, A.; Agram, J.-L.; Andrea, J.; Bloch, D.; Brom, J.-M.; Buttignol, M.; Chabert, E. C.; Chanon, N.; Collard, C.; Conte, E.; Coubez, X.; Fontaine, J.-C.; Gelé, D.; Goerlach, U.; Le Bihan, A.-C.; Van Hove, P.; Gadrat, S.; Beauceron, S.; Bernet, C.; Boudoul, G.; Chierici, R.; Contardo, D.; Courbon, B.; Depasse, P.; El Mamouni, H.; Fay, J.; Finco, L.; Gascon, S.; Gouzevitch, M.; Grenier, G.; Ille, B.; Lagarde, F.; Laktineh, I. B.; Lethuillier, M.; Mirabito, L.; Pequegnot, A. L.; Perries, S.; Popov, A.; Sordini, V.; Vander Donckt, M.; Viret, S.; Toriashvili, T.; Lomidze, D.; Autermann, C.; Beranek, S.; Feld, L.; Kiesel, M. K.; Klein, K.; Lipinski, M.; Preuten, M.; Schomakers, C.; Schulz, J.; Verlage, T.; Albert, A.; Brodski, M.; Dietz-Laursonn, E.; Duchardt, D.; Endres, M.; Erdmann, M.; Erdweg, S.; Esch, T.; Fischer, R.; Güth, A.; Hamer, M.; Hebbeker, T.; Heidemann, C.; Hoepfner, K.; Knutzen, S.; Merschmeyer, M.; Meyer, A.; Millet, P.; Mukherjee, S.; Olschewski, M.; Padeken, K.; Pook, T.; Radziej, M.; Reithler, H.; Rieger, M.; Scheuch, F.; Sonnenschein, L.; Teyssier, D.; Thüer, S.; Flügge, G.; Kargoll, B.; Kress, T.; Künsken, A.; Lingemann, J.; Müller, T.; Nehrkorn, A.; Nowack, A.; Pistone, C.; Pooth, O.; Stahl, A.; Aldaya Martin, M.; Arndt, T.; Asawatangtrakuldee, C.; Beernaert, K.; Behnke, O.; Behrens, U.; Bin Anuar, A. A.; Borras, K.; Botta, V.; Campbell, A.; Connor, P.; Contreras-Campana, C.; Costanza, F.; Diez Pardos, C.; Eckerlin, G.; Eckstein, D.; Eichhorn, T.; Eren, E.; Gallo, E.; Garay Garcia, J.; Geiser, A.; Gizhko, A.; Grados Luyando, J. M.; Grohsjean, A.; Gunnellini, P.; Harb, A.; Hauk, J.; Hempel, M.; Jung, H.; Kalogeropoulos, A.; Kasemann, M.; Keaveney, J.; Kleinwort, C.; Korol, I.; Krücker, D.; Lange, W.; Lelek, A.; Lenz, T.; Leonard, J.; Lipka, K.; Lohmann, W.; Mankel, R.; Melzer-Pellmann, I.-A.; Meyer, A. B.; Mittag, G.; Mnich, J.; Mussgiller, A.; Ntomari, E.; Pitzl, D.; Placakyte, R.; Raspereza, A.; Roland, B.; Savitskyi, M.; Saxena, P.; Shevchenko, R.; Spannagel, S.; Stefaniuk, N.; Van Onsem, G. P.; Walsh, R.; Wen, Y.; Wichmann, K.; Wissing, C.; Bein, S.; Blobel, V.; Centis Vignali, M.; Draeger, A. R.; Dreyer, T.; Garutti, E.; Gonzalez, D.; Haller, J.; Hoffmann, M.; Junkes, A.; Klanner, R.; Kogler, R.; Kovalchuk, N.; Kurz, S.; Lapsien, T.; Marchesini, I.; Marconi, D.; Meyer, M.; Niedziela, M.; Nowatschin, D.; Pantaleo, F.; Peiffer, T.; Perieanu, A.; Scharf, C.; Schleper, P.; Schmidt, A.; Schumann, S.; Schwandt, J.; Sonneveld, J.; Stadie, H.; Steinbrück, G.; Stober, F. M.; Stöver, M.; Tholen, H.; Troendle, D.; Usai, E.; Vanelderen, L.; Vanhoefer, A.; Vormwald, B.; Akbiyik, M.; Barth, C.; Baur, S.; Baus, C.; Berger, J.; Butz, E.; Caspart, R.; Chwalek, T.; Colombo, F.; De Boer, W.; Dierlamm, A.; Freund, B.; Friese, R.; Giffels, M.; Gilbert, A.; Haitz, D.; Hartmann, F.; Heindl, S. M.; Husemann, U.; Kassel, F.; Kudella, S.; Mildner, H.; Mozer, M. U.; Müller, Th.; Plagge, M.; Quast, G.; Rabbertz, K.; Schröder, M.; Shvetsov, I.; Sieber, G.; Simonis, H. J.; Ulrich, R.; Wayand, S.; Weber, M.; Weiler, T.; Williamson, S.; Wöhrmann, C.; Wolf, R.; Anagnostou, G.; Daskalakis, G.; Geralis, T.; Giakoumopoulou, V. A.; Kyriakis, A.; Loukas, D.; Topsis-Giotis, I.; Kesisoglou, S.; Panagiotou, A.; Saoulidou, N.; Evangelou, I.; Flouris, G.; Foudas, C.; Kokkas, P.; Manthos, N.; Papadopoulos, I.; Paradas, E.; Strologas, J.; Triantis, F. A.; Csanad, M.; Filipovic, N.; Pasztor, G.; Bencze, G.; Hajdu, C.; Horvath, D.; Sikler, F.; Veszpremi, V.; Vesztergombi, G.; Zsigmond, A. J.; Beni, N.; Czellar, S.; Karancsi, J.; Makovec, A.; Molnar, J.; Szillasi, Z.; Bartók, M.; Raics, P.; Trocsanyi, Z. L.; Ujvari, B.; Choudhury, S.; Komaragiri, J. R.; Bahinipati, S.; Bhowmik, S.; Mal, P.; Mandal, K.; Nayak, A.; Sahoo, D. K.; Sahoo, N.; Swain, S. K.; Bansal, S.; Beri, S. B.; Bhatnagar, V.; Bhawandeep, U.; Chawla, R.; Dhingra, N.; Kalsi, A. K.; Kaur, A.; Kaur, M.; Kumar, R.; Kumari, P.; Mehta, A.; Mittal, M.; Singh, J. B.; Walia, G.; Kumar, Ashok; Shah, Aashaq; Bhardwaj, A.; Chauhan, S.; Choudhary, B. C.; Garg, R. B.; Keshri, S.; Malhotra, S.; Naimuddin, M.; Ranjan, K.; Sharma, R.; Sharma, V.; Bhattacharya, R.; Bhattacharya, S.; Dey, S.; Dutt, S.; Dutta, S.; Ghosh, S.; Majumdar, N.; Modak, A.; Mondal, K.; Mukhopadhyay, S.; Nandan, S.; Purohit, A.; Roy, A.; Roy, D.; Roy Chowdhury, S.; Sarkar, S.; Sharan, M.; Thakur, S.; Behera, P. K.; Chudasama, R.; Dutta, D.; Jha, V.; Kumar, V.; Mohanty, A. K.; Netrakanti, P. K.; Pant, L. M.; Shukla, P.; Topkar, A.; Aziz, T.; Dugad, S.; Mahakud, B.; Mitra, S.; Mohanty, G. B.; Parida, B.; Sur, N.; Sutar, B.; Banerjee, S.; Bhattacharya, S.; Chatterjee, S.; Das, P.; Guchait, M.; Jain, Sa.; Kumar, S.; Maity, M.; Majumder, G.; Mazumdar, K.; Sarkar, T.; Wickramage, N.; Chauhan, S.; Dube, S.; Hegde, V.; Kapoor, A.; Kothekar, K.; Pandey, S.; Rane, A.; Sharma, S.; Chenarani, S.; Eskandari Tadavani, E.; Etesami, S. M.; Khakzad, M.; Mohammadi Najafabadi, M.; Naseri, M.; Paktinat Mehdiabadi, S.; Rezaei Hosseinabadi, F.; Safarzadeh, B.; Zeinali, M.; Felcini, M.; Grunewald, M.; Abbrescia, M.; Calabria, C.; Caputo, C.; Colaleo, A.; Creanza, D.; Cristella, L.; De Filippis, N.; De Palma, M.; Fiore, L.; Iaselli, G.; Maggi, G.; Maggi, M.; Miniello, G.; My, S.; Nuzzo, S.; Pompili, A.; Pugliese, G.; Radogna, R.; Ranieri, A.; Selvaggi, G.; Sharma, A.; Silvestris, L.; Venditti, R.; Verwilligen, P.; Abbiendi, G.; Battilana, C.; Bonacorsi, D.; Braibant-Giacomelli, S.; Brigliadori, L.; Campanini, R.; Capiluppi, P.; Castro, A.; Cavallo, F. R.; Chhibra, S. S.; Cuffiani, M.; Dallavalle, G. M.; Fabbri, F.; Fanfani, A.; Fasanella, D.; Giacomelli, P.; Guiducci, L.; Marcellini, S.; Masetti, G.; Navarria, F. L.; Perrotta, A.; Rossi, A. M.; Rovelli, T.; Siroli, G. P.; Tosi, N.; Albergo, S.; Costa, S.; Di Mattia, A.; Giordano, F.; Potenza, R.; Tricomi, A.; Tuve, C.; Barbagli, G.; Chatterjee, K.; Ciulli, V.; Civinini, C.; D'Alessandro, R.; Focardi, E.; Lenzi, P.; Meschini, M.; Paoletti, S.; Russo, L.; Sguazzoni, G.; Strom, D.; Viliani, L.; Benussi, L.; Bianco, S.; Fabbri, F.; Piccolo, D.; Primavera, F.; Calvelli, V.; Ferro, F.; Robutti, E.; Tosi, S.; Brianza, L.; Brivio, F.; Ciriolo, V.; Dinardo, M. E.; Fiorendi, S.; Gennai, S.; Ghezzi, A.; Govoni, P.; Malberti, M.; Malvezzi, S.; Manzoni, R. A.; Menasce, D.; Moroni, L.; Paganoni, M.; Pauwels, K.; Pedrini, D.; Pigazzini, S.; Ragazzi, S.; Tabarelli de Fatis, T.; Buontempo, S.; Cavallo, N.; Di Guida, S.; Esposito, M.; Fabozzi, F.; Fienga, F.; Iorio, A. O. M.; Khan, W. A.; Lanza, G.; Lista, L.; Meola, S.; Paolucci, P.; Sciacca, C.; Thyssen, F.; Azzi, P.; Bacchetta, N.; Benato, L.; Boletti, A.; Carlin, R.; Carvalho Antunes De Oliveira, A.; Checchia, P.; Dall'Osso, M.; De Castro Manzano, P.; Dorigo, T.; Gasparini, U.; Gozzelino, A.; Lacaprara, S.; Margoni, M.; Meneguzzo, A. T.; Michelotto, M.; Montecassiano, F.; Passaseo, M.; Pozzobon, N.; Ronchese, P.; Rossin, R.; Simonetto, F.; Torassa, E.; Zanetti, M.; Zotto, P.; Zumerle, G.; Braghieri, A.; Fallavollita, F.; Magnani, A.; Montagna, P.; Ratti, S. P.; Re, V.; Ressegotti, M.; Riccardi, C.; Salvini, P.; Vai, I.; Vitulo, P.; Alunni Solestizi, L.; Bilei, G. M.; Ciangottini, D.; Fanò, L.; Lariccia, P.; Leonardi, R.; Mantovani, G.; Mariani, V.; Menichelli, M.; Saha, A.; Santocchia, A.; Spiga, D.; Androsov, K.; Azzurri, P.; Bagliesi, G.; Bernardini, J.; Boccali, T.; Borrello, L.; Castaldi, R.; Ciocci, M. A.; Dell'Orso, R.; Fedi, G.; Giassi, A.; Grippo, M. T.; Ligabue, F.; Lomtadze, T.; Martini, L.; Messineo, A.; Palla, F.; Rizzi, A.; Savoy-Navarro, A.; Spagnolo, P.; Tenchini, R.; Tonelli, G.; Venturi, A.; Verdini, P. G.; Barone, L.; Cavallari, F.; Cipriani, M.; Del Re, D.; Diemoz, M.; Gelli, S.; Longo, E.; Margaroli, F.; Marzocchi, B.; Meridiani, P.; Organtini, G.; Paramatti, R.; Preiato, F.; Rahatlou, S.; Rovelli, C.; Santanastasio, F.; Amapane, N.; Arcidiacono, R.; Argiro, S.; Arneodo, M.; Bartosik, N.; Bellan, R.; Biino, C.; Cartiglia, N.; Cenna, F.; Costa, M.; Covarelli, R.; Degano, A.; Demaria, N.; Kiani, B.; Mariotti, C.; Maselli, S.; Migliore, E.; Monaco, V.; Monteil, E.; Monteno, M.; Obertino, M. M.; Pacher, L.; Pastrone, N.; Pelliccioni, M.; Pinna Angioni, G. L.; Ravera, F.; Romero, A.; Ruspa, M.; Sacchi, R.; Shchelina, K.; Sola, V.; Solano, A.; Staiano, A.; Traczyk, P.; Belforte, S.; Casarsa, M.; Cossutti, F.; Della Ricca, G.; Zanetti, A.; Kim, D. H.; Kim, G. N.; Kim, M. S.; Lee, J.; Lee, S.; Lee, S. W.; Oh, Y. D.; Sekmen, S.; Son, D. C.; Yang, Y. C.; Lee, A.; Kim, H.; Moon, D. H.; Brochero Cifuentes, J. A.; Goh, J.; Kim, T. J.; Cho, S.; Choi, S.; Go, Y.; Gyun, D.; Ha, S.; Hong, B.; Jo, Y.; Kim, Y.; Lee, K.; Lee, K. S.; Lee, S.; Lim, J.; Park, S. K.; Roh, Y.; Almond, J.; Kim, J.; Lee, H.; Oh, S. B.; Radburn-Smith, B. C.; Seo, S. h.; Yang, U. K.; Yoo, H. D.; Yu, G. B.; Choi, M.; Kim, H.; Kim, J. H.; Lee, J. S. H.; Park, I. C.; Ryu, G.; Choi, Y.; Hwang, C.; Lee, J.; Yu, I.; Dudenas, V.; Juodagalvis, A.; Vaitkus, J.; Ahmed, I.; Ibrahim, Z. A.; Md Ali, M. A. B.; Mohamad Idris, F.; Wan Abdullah, W. A. T.; Yusli, M. N.; Zolkapli, Z.; Castilla-Valdez, H.; De La Cruz-Burelo, E.; Heredia-De La Cruz, I.; Lopez-Fernandez, R.; Mejia Guisao, J.; Sanchez-Hernandez, A.; Carrillo Moreno, S.; Oropeza Barrera, C.; Vazquez Valencia, F.; Pedraza, I.; Salazar Ibarguen, H. A.; Uribe Estrada, C.; Morelos Pineda, A.; Krofcheck, D.; Butler, P. H.; Ahmad, A.; Ahmad, M.; Hassan, Q.; Hoorani, H. R.; Saddique, A.; Shah, M. A.; Shoaib, M.; Waqas, M.; Bialkowska, H.; Bluj, M.; Boimska, B.; Frueboes, T.; Górski, M.; Kazana, M.; Nawrocki, K.; Romanowska-Rybinska, K.; Szleper, M.; Zalewski, P.; Bunkowski, K.; Byszuk, A.; Doroba, K.; Kalinowski, A.; Konecki, M.; Krolikowski, J.; Misiura, M.; Olszewski, M.; Pyskir, A.; Walczak, M.; Bargassa, P.; Beirão Da Cruz E Silva, C.; Calpas, B.; Di Francesco, A.; Faccioli, P.; Gallinaro, M.; Hollar, J.; Leonardo, N.; Lloret Iglesias, L.; Nemallapudi, M. V.; Seixas, J.; Toldaiev, O.; Vadruccio, D.; Varela, J.; Afanasiev, S.; Bunin, P.; Gavrilenko, M.; Golutvin, I.; Gorbunov, I.; Kamenev, A.; Karjavin, V.; Lanev, A.; Malakhov, A.; Matveev, V.; Palichik, V.; Perelygin, V.; Shmatov, S.; Shulha, S.; Skatchkov, N.; Smirnov, V.; Voytishin, N.; Zarubin, A.; Ivanov, Y.; Kim, V.; Kuznetsova, E.; Levchenko, P.; Murzin, V.; Oreshkin, V.; Smirnov, I.; Sulimov, V.; Uvarov, L.; Vavilov, S.; Vorobyev, A.; Andreev, Yu.; Dermenev, A.; Gninenko, S.; Golubev, N.; Karneyeu, A.; Kirsanov, M.; Krasnikov, N.; Pashenkov, A.; Tlisov, D.; Toropin, A.; Epshteyn, V.; Gavrilov, V.; Lychkovskaya, N.; Popov, V.; Pozdnyakov, I.; Safronov, G.; Spiridonov, A.; Toms, M.; Vlasov, E.; Zhokin, A.; Aushev, T.; Bylinkin, A.; Chadeeva, M.; Polikarpov, S.; Rusinov, V.; Andreev, V.; Azarkin, M.; Dremin, I.; Kirakosyan, M.; Terkulov, A.; Baskakov, A.; Belyaev, A.; Boos, E.; Bunichev, V.; Dubinin, M.; Dudko, L.; Klyukhin, V.; Kodolova, O.; Korneeva, N.; Lokhtin, I.; Miagkov, I.; Obraztsov, S.; Perfilov, M.; Savrin, V.; Volkov, P.; Blinov, V.; Skovpen, Y.; Shtol, D.; Azhgirey, I.; Bayshev, I.; Bitioukov, S.; Elumakhov, D.; Kachanov, V.; Kalinin, A.; Konstantinov, D.; Krychkine, V.; Petrov, V.; Ryutin, R.; Sobol, A.; Troshin, S.; Tyurin, N.; Uzunian, A.; Volkov, A.; Adzic, P.; Cirkovic, P.; Devetak, D.; Dordevic, M.; Milosevic, J.; Rekovic, V.; Alcaraz Maestre, J.; Barrio Luna, M.; Cerrada, M.; Colino, N.; De La Cruz, B.; Delgado Peris, A.; Escalante Del Valle, A.; Fernandez Bedoya, C.; Fernández Ramos, J. P.; Flix, J.; Fouz, M. C.; Garcia-Abia, P.; Gonzalez Lopez, O.; Goy Lopez, S.; Hernandez, J. M.; Josa, M. I.; Pérez-Calero Yzquierdo, A.; Puerta Pelayo, J.; Quintario Olmeda, A.; Redondo, I.; Romero, L.; Soares, M. S.; de Trocóniz, J. F.; Missiroli, M.; Moran, D.; Cuevas, J.; Erice, C.; Fernandez Menendez, J.; Gonzalez Caballero, I.; González Fernández, J. R.; Palencia Cortezon, E.; Sanchez Cruz, S.; Suárez Andrés, I.; Vischia, P.; Vizan Garcia, J. M.; Cabrillo, I. J.; Calderon, A.; Chazin Quero, B.; Curras, E.; Fernandez, M.; Garcia-Ferrero, J.; Gomez, G.; Lopez Virto, A.; Marco, J.; Martinez Rivero, C.; Matorras, F.; Piedra Gomez, J.; Rodrigo, T.; Ruiz-Jimeno, A.; Scodellaro, L.; Trevisani, N.; Vila, I.; Vilar Cortabitarte, R.; Abbaneo, D.; Auffray, E.; Baillon, P.; Ball, A. H.; Barney, D.; Bianco, M.; Bloch, P.; Bocci, A.; Botta, C.; Camporesi, T.; Castello, R.; Cepeda, M.; Cerminara, G.; Chen, Y.; d'Enterria, D.; Dabrowski, A.; Daponte, V.; David, A.; De Gruttola, M.; De Roeck, A.; Di Marco, E.; Dobson, M.; Dorney, B.; du Pree, T.; Dünser, M.; Dupont, N.; Elliott-Peisert, A.; Everaerts, P.; Franzoni, G.; Fulcher, J.; Funk, W.; Gigi, D.; Gill, K.; Glege, F.; Gulhan, D.; Gundacker, S.; Guthoff, M.; Harris, P.; Hegeman, J.; Innocente, V.; Janot, P.; Karacheban, O.; Kieseler, J.; Kirschenmann, H.; Knünz, V.; Kornmayer, A.; Kortelainen, M. J.; Lange, C.; Lecoq, P.; Lourenço, C.; Lucchini, M. T.; Malgeri, L.; Mannelli, M.; Martelli, A.; Meijers, F.; Merlin, J. A.; Mersi, S.; Meschi, E.; Milenovic, P.; Moortgat, F.; Mulders, M.; Neugebauer, H.; Orfanelli, S.; Orsini, L.; Pape, L.; Perez, E.; Peruzzi, M.; Petrilli, A.; Petrucciani, G.; Pfeiffer, A.; Pierini, M.; Racz, A.; Reis, T.; Rolandi, G.; Rovere, M.; Sakulin, H.; Sauvan, J. B.; Schäfer, C.; Schwick, C.; Seidel, M.; Sharma, A.; Silva, P.; Sphicas, P.; Steggemann, J.; Stoye, M.; Tosi, M.; Treille, D.; Triossi, A.; Tsirou, A.; Veckalns, V.; Veres, G. I.; Verweij, M.; Wardle, N.; Zagozdzinska, A.; Zeuner, W. D.; Bertl, W.; Deiters, K.; Erdmann, W.; Horisberger, R.; Ingram, Q.; Kaestli, H. C.; Kotlinski, D.; Langenegger, U.; Rohe, T.; Wiederkehr, S. A.; Bachmair, F.; Bäni, L.; Berger, P.; Bianchini, L.; Casal, B.; Dissertori, G.; Dittmar, M.; Donegà, M.; Grab, C.; Heidegger, C.; Hits, D.; Hoss, J.; Kasieczka, G.; Klijnsma, T.; Lustermann, W.; Mangano, B.; Marionneau, M.; Martinez Ruiz del Arbol, P.; Masciovecchio, M.; Meinhard, M. T.; Meister, D.; Micheli, F.; Musella, P.; Nessi-Tedaldi, F.; Pandolfi, F.; Pata, J.; Pauss, F.; Perrin, G.; Perrozzi, L.; Quittnat, M.; Rossini, M.; Schönenberger, M.; Starodumov, A.; Tavolaro, V. R.; Theofilatos, K.; Vesterbacka Olsson, M. L.; Wallny, R.; Zhu, D. H.; Aarrestad, T. K.; Amsler, C.; Caminada, L.; Canelli, M. F.; De Cosa, A.; Donato, S.; Galloni, C.; Hinzmann, A.; Hreus, T.; Kilminster, B.; Ngadiuba, J.; Pinna, D.; Rauco, G.; Robmann, P.; Salerno, D.; Seitz, C.; Yang, Y.; Zucchetta, A.; Candelise, V.; Doan, T. H.; Jain, Sh.; Khurana, R.; Konyushikhin, M.; Kuo, C. M.; Lin, W.; Pozdnyakov, A.; Yu, S. S.; Kumar, Arun; Chang, P.; Chang, Y. H.; Chao, Y.; Chen, K. F.; Chen, P. H.; Fiori, F.; Hou, W.-S.; Hsiung, Y.; Liu, Y. F.; Lu, R.-S.; Miñano Moya, M.; Paganis, E.; Psallidas, A.; Tsai, J. f.; Asavapibhop, B.; Kovitanggoon, K.; Singh, G.; Srimanobhas, N.; Adiguzel, A.; Bakirci, M. N.; Boran, F.; Damarseckin, S.; Demiroglu, Z. S.; Dozen, C.; Eskut, E.; Girgis, S.; Gokbulut, G.; Guler, Y.; Hos, I.; Kangal, E. E.; Kara, O.; Kiminsu, U.; Oglakci, M.; Onengut, G.; Ozdemir, K.; Ozturk, S.; Polatoz, A.; Sunar Cerci, D.; Turkcapar, S.; Zorbakir, I. S.; Zorbilmez, C.; Bilin, B.; Karapinar, G.; Ocalan, K.; Yalvac, M.; Zeyrek, M.; Gülmez, E.; Kaya, M.; Kaya, O.; Yetkin, E. A.; Cakir, A.; Cankocak, K.; Grynyov, B.; Levchuk, L.; Sorokin, P.; Aggleton, R.; Ball, F.; Beck, L.; Brooke, J. J.; Burns, D.; Clement, E.; Cussans, D.; Flacher, H.; Goldstein, J.; Grimes, M.; Heath, G. P.; Heath, H. F.; Jacob, J.; Kreczko, L.; Lucas, C.; Newbold, D. M.; Paramesvaran, S.; Poll, A.; Sakuma, T.; Seif El Nasr-storey, S.; Smith, D.; Smith, V. J.; Bell, K. W.; Belyaev, A.; Brew, C.; Brown, R. M.; Calligaris, L.; Cieri, D.; Cockerill, D. J. A.; Coughlan, J. A.; Harder, K.; Harper, S.; Olaiya, E.; Petyt, D.; Shepherd-Themistocleous, C. H.; Thea, A.; Tomalin, I. R.; Williams, T.; Baber, M.; Bainbridge, R.; Buchmuller, O.; Bundock, A.; Casasso, S.; Citron, M.; Colling, D.; Corpe, L.; Dauncey, P.; Davies, G.; De Wit, A.; Della Negra, M.; Di Maria, R.; Dunne, P.; Elwood, A.; Futyan, D.; Haddad, Y.; Hall, G.; Iles, G.; James, T.; Lane, R.; Laner, C.; Lyons, L.; Magnan, A.-M.; Malik, S.; Mastrolorenzo, L.; Nash, J.; Nikitenko, A.; Pela, J.; Pesaresi, M.; Raymond, D. M.; Richards, A.; Rose, A.; Scott, E.; Seez, C.; Summers, S.; Tapper, A.; Uchida, K.; Vazquez Acosta, M.; Virdee, T.; Wright, J.; Zenz, S. C.; Cole, J. E.; Hobson, P. R.; Khan, A.; Kyberd, P.; Reid, I. D.; Symonds, P.; Teodorescu, L.; Turner, M.; Borzou, A.; Call, K.; Dittmann, J.; Hatakeyama, K.; Liu, H.; Pastika, N.; Bartek, R.; Dominguez, A.; Buccilli, A.; Cooper, S. I.; Henderson, C.; Rumerio, P.; West, C.; Arcaro, D.; Avetisyan, A.; Bose, T.; Gastler, D.; Rankin, D.; Richardson, C.; Rohlf, J.; Sulak, L.; Zou, D.; Benelli, G.; Cutts, D.; Garabedian, A.; Hakala, J.; Heintz, U.; Hogan, J. M.; Kwok, K. H. M.; Laird, E.; Landsberg, G.; Mao, Z.; Narain, M.; Piperov, S.; Sagir, S.; Spencer, E.; Syarif, R.; Band, R.; Brainerd, C.; Burns, D.; Calderon De La Barca Sanchez, M.; Chertok, M.; Conway, J.; Conway, R.; Cox, P. T.; Erbacher, R.; Flores, C.; Funk, G.; Gardner, M.; Ko, W.; Lander, R.; Mclean, C.; Mulhearn, M.; Pellett, D.; Pilot, J.; Shalhout, S.; Shi, M.; Smith, J.; Squires, M.; Stolp, D.; Tos, K.; Tripathi, M.; Wang, Z.; Bachtis, M.; Bravo, C.; Cousins, R.; Dasgupta, A.; Florent, A.; Hauser, J.; Ignatenko, M.; Mccoll, N.; Saltzberg, D.; Schnaible, C.; Valuev, V.; Bouvier, E.; Burt, K.; Clare, R.; Ellison, J.; Gary, J. W.; Ghiasi Shirazi, S. M. A.; Hanson, G.; Heilman, J.; Jandir, P.; Kennedy, E.; Lacroix, F.; Long, O. R.; Olmedo Negrete, M.; Paneva, M. I.; Shrinivas, A.; Si, W.; Wei, H.; Wimpenny, S.; Yates, B. R.; Branson, J. G.; Cerati, G. B.; Cittolin, S.; Derdzinski, M.; Holzner, A.; Klein, D.; Kole, G.; Krutelyov, V.; Letts, J.; Macneill, I.; Olivito, D.; Padhi, S.; Pieri, M.; Sani, M.; Sharma, V.; Simon, S.; Tadel, M.; Vartak, A.; Wasserbaech, S.; Würthwein, F.; Yagil, A.; Zevi Della Porta, G.; Amin, N.; Bhandari, R.; Bradmiller-Feld, J.; Campagnari, C.; Dishaw, A.; Dutta, V.; Franco Sevilla, M.; George, C.; Golf, F.; Gouskos, L.; Gran, J.; Heller, R.; Incandela, J.; Mullin, S. D.; Ovcharova, A.; Qu, H.; Richman, J.; Stuart, D.; Suarez, I.; Yoo, J.; Anderson, D.; Bendavid, J.; Bornheim, A.; Lawhorn, J. M.; Newman, H. B.; Pena, C.; Spiropulu, M.; Vlimant, J. R.; Xie, S.; Zhu, R. Y.; Andrews, M. B.; Ferguson, T.; Paulini, M.; Russ, J.; Sun, M.; Vogel, H.; Vorobiev, I.; Weinberg, M.; Cumalat, J. P.; Ford, W. T.; Jensen, F.; Johnson, A.; Krohn, M.; Leontsinis, S.; Mulholland, T.; Stenson, K.; Wagner, S. R.; Alexander, J.; Chaves, J.; Chu, J.; Dittmer, S.; Mcdermott, K.; Mirman, N.; Patterson, J. R.; Rinkevicius, A.; Ryd, A.; Skinnari, L.; Soffi, L.; Tan, S. M.; Tao, Z.; Thom, J.; Tucker, J.; Wittich, P.; Zientek, M.; Winn, D.; Abdullin, S.; Albrow, M.; Apollinari, G.; Apresyan, A.; Apyan, A.; Banerjee, S.; Bauerdick, L. A. T.; Beretvas, A.; Berryhill, J.; Bhat, P. C.; Bolla, G.; Burkett, K.; Butler, J. N.; Canepa, A.; Cheung, H. W. K.; Chlebana, F.; Cremonesi, M.; Duarte, J.; Elvira, V. D.; Fisk, I.; Freeman, J.; Gecse, Z.; Gottschalk, E.; Gray, L.; Green, D.; Grünendahl, S.; Gutsche, O.; Harris, R. M.; Hasegawa, S.; Hirschauer, J.; Hu, Z.; Jayatilaka, B.; Jindariani, S.; Johnson, M.; Joshi, U.; Klima, B.; Kreis, B.; Lammel, S.; Lincoln, D.; Lipton, R.; Liu, M.; Liu, T.; Lopes De Sá, R.; Lykken, J.; Maeshima, K.; Magini, N.; Marraffino, J. M.; Maruyama, S.; Mason, D.; McBride, P.; Merkel, P.; Mrenna, S.; Nahn, S.; O'Dell, V.; Pedro, K.; Prokofyev, O.; Rakness, G.; Ristori, L.; Schneider, B.; Sexton-Kennedy, E.; Soha, A.; Spalding, W. J.; Spiegel, L.; Stoynev, S.; Strait, J.; Strobbe, N.; Taylor, L.; Tkaczyk, S.; Tran, N. V.; Uplegger, L.; Vaandering, E. W.; Vernieri, C.; Verzocchi, M.; Vidal, R.; Wang, M.; Weber, H. A.; Whitbeck, A.; Acosta, D.; Avery, P.; Bortignon, P.; Brinkerhoff, A.; Carnes, A.; Carver, M.; Curry, D.; Das, S.; Field, R. D.; Furic, I. K.; Konigsberg, J.; Korytov, A.; Kotov, K.; Ma, P.; Matchev, K.; Mei, H.; Mitselmakher, G.; Rank, D.; Shchutska, L.; Sperka, D.; Terentyev, N.; Thomas, L.; Wang, J.; Wang, S.; Yelton, J.; Linn, S.; Markowitz, P.; Martinez, G.; Rodriguez, J. L.; Ackert, A.; Adams, T.; Askew, A.; Hagopian, S.; Hagopian, V.; Johnson, K. F.; Kolberg, T.; Perry, T.; Prosper, H.; Santra, A.; Yohay, R.; Baarmand, M. M.; Bhopatkar, V.; Colafranceschi, S.; Hohlmann, M.; Noonan, D.; Roy, T.; Yumiceva, F.; Adams, M. R.; Apanasevich, L.; Berry, D.; Betts, R. R.; Cavanaugh, R.; Chen, X.; Evdokimov, O.; Gerber, C. E.; Hangal, D. A.; Hofman, D. J.; Jung, K.; Kamin, J.; Sandoval Gonzalez, I. D.; Tonjes, M. B.; Trauger, H.; Varelas, N.; Wang, H.; Wu, Z.; Zhang, J.; Bilki, B.; Clarida, W.; Dilsiz, K.; Durgut, S.; Gandrajula, R. P.; Haytmyradov, M.; Khristenko, V.; Merlo, J.-P.; Mermerkaya, H.; Mestvirishvili, A.; Moeller, A.; Nachtman, J.; Ogul, H.; Onel, Y.; Ozok, F.; Penzo, A.; Snyder, C.; Tiras, E.; Wetzel, J.; Yi, K.; Blumenfeld, B.; Cocoros, A.; Eminizer, N.; Fehling, D.; Feng, L.; Gritsan, A. V.; Maksimovic, P.; Roskes, J.; Sarica, U.; Swartz, M.; Xiao, M.; You, C.; Al-bataineh, A.; Baringer, P.; Bean, A.; Boren, S.; Bowen, J.; Castle, J.; Khalil, S.; Kropivnitskaya, A.; Majumder, D.; Mcbrayer, W.; Murray, M.; Royon, C.; Sanders, S.; Stringer, R.; Tapia Takaki, J. D.; Wang, Q.; Ivanov, A.; Kaadze, K.; Maravin, Y.; Mohammadi, A.; Saini, L. K.; Skhirtladze, N.; Toda, S.; Rebassoo, F.; Wright, D.; Anelli, C.; Baden, A.; Baron, O.; Belloni, A.; Calvert, B.; Eno, S. C.; Ferraioli, C.; Hadley, N. J.; Jabeen, S.; Jeng, G. Y.; Kellogg, R. G.; Kunkle, J.; Mignerey, A. C.; Ricci-Tam, F.; Shin, Y. H.; Skuja, A.; Tonwar, S. C.; Abercrombie, D.; Allen, B.; Azzolini, V.; Barbieri, R.; Baty, A.; Bi, R.; Bierwagen, K.; Brandt, S.; Busza, W.; Cali, I. A.; D'Alfonso, M.; Demiragli, Z.; Gomez Ceballos, G.; Goncharov, M.; Hsu, D.; Iiyama, Y.; Innocenti, G. M.; Klute, M.; Kovalskyi, D.; Lai, Y. S.; Lee, Y.-J.; Levin, A.; Luckey, P. D.; Maier, B.; Marini, A. C.; Mcginn, C.; Mironov, C.; Narayanan, S.; Niu, X.; Paus, C.; Roland, C.; Roland, G.; Salfeld-Nebgen, J.; Stephans, G. S. F.; Tatar, K.; Velicanu, D.; Wang, J.; Wang, T. W.; Wyslouch, B.; Benvenuti, A. C.; Chatterjee, R. M.; Evans, A.; Hansen, P.; Kalafut, S.; Kao, S. C.; Kubota, Y.; Lesko, Z.; Mans, J.; Nourbakhsh, S.; Ruckstuhl, N.; Rusack, R.; Tambe, N.; Turkewitz, J.; Acosta, J. G.; Oliveros, S.; Avdeeva, E.; Bloom, K.; Claes, D. R.; Fangmeier, C.; Gonzalez Suarez, R.; Kamalieddin, R.; Kravchenko, I.; Monroy, J.; Siado, J. E.; Snow, G. R.; Stieger, B.; Alyari, M.; Dolen, J.; Godshalk, A.; Harrington, C.; Iashvili, I.; Kharchilava, A.; Parker, A.; Rappoccio, S.; Roozbahani, B.; Alverson, G.; Barberis, E.; Hortiangtham, A.; Massironi, A.; Morse, D. M.; Nash, D.; Orimoto, T.; Teixeira De Lima, R.; Trocino, D.; Wang, R.-J.; Wood, D.; Bhattacharya, S.; Charaf, O.; Hahn, K. A.; Mucia, N.; Odell, N.; Pollack, B.; Schmitt, M. H.; Sung, K.; Trovato, M.; Velasco, M.; Dev, N.; Hildreth, M.; Hurtado Anampa, K.; Jessop, C.; Karmgard, D. J.; Kellams, N.; Lannon, K.; Loukas, N.; Marinelli, N.; Meng, F.; Mueller, C.; Musienko, Y.; Planer, M.; Reinsvold, A.; Ruchti, R.; Rupprecht, N.; Smith, G.; Taroni, S.; Wayne, M.; Wolf, M.; Woodard, A.; Alimena, J.; Antonelli, L.; Bylsma, B.; Durkin, L. S.; Flowers, S.; Francis, B.; Hart, A.; Hill, C.; Ji, W.; Liu, B.; Luo, W.; Puigh, D.; Winer, B. L.; Wulsin, H. W.; Benaglia, A.; Cooperstein, S.; Driga, O.; Elmer, P.; Hardenbrook, J.; Hebda, P.; Lange, D.; Luo, J.; Marlow, D.; Mei, K.; Ojalvo, I.; Olsen, J.; Palmer, C.; Piroué, P.; Stickland, D.; Svyatkovskiy, A.; Tully, C.; Malik, S.; Norberg, S.; Barker, A.; Barnes, V. E.; Folgueras, S.; Gutay, L.; Jha, M. K.; Jones, M.; Jung, A. W.; Khatiwada, A.; Miller, D. H.; Neumeister, N.; Schulte, J. F.; Sun, J.; Wang, F.; Xie, W.; Cheng, T.; Parashar, N.; Stupak, J.; Adair, A.; Akgun, B.; Chen, Z.; Ecklund, K. M.; Geurts, F. J. M.; Guilbaud, M.; Li, W.; Michlin, B.; Northup, M.; Padley, B. P.; Roberts, J.; Rorie, J.; Tu, Z.; Zabel, J.; Betchart, B.; Bodek, A.; de Barbaro, P.; Demina, R.; Duh, Y. t.; Ferbel, T.; Galanti, M.; Garcia-Bellido, A.; Han, J.; Hindrichs, O.; Khukhunaishvili, A.; Lo, K. H.; Tan, P.; Verzetti, M.; Ciesielski, R.; Goulianos, K.; Mesropian, C.; Agapitos, A.; Chou, J. P.; Gershtein, Y.; Gómez Espinosa, T. A.; Halkiadakis, E.; Heindl, M.; Hughes, E.; Kaplan, S.; Kunnawalkam Elayavalli, R.; Kyriacou, S.; Lath, A.; Montalvo, R.; Nash, K.; Osherson, M.; Saka, H.; Salur, S.; Schnetzer, S.; Sheffield, D.; Somalwar, S.; Stone, R.; Thomas, S.; Thomassen, P.; Walker, M.; Foerster, M.; Heideman, J.; Riley, G.; Rose, K.; Spanier, S.; Thapa, K.; Bouhali, O.; Castaneda Hernandez, A.; Celik, A.; Dalchenko, M.; De Mattia, M.; Delgado, A.; Dildick, S.; Eusebi, R.; Gilmore, J.; Huang, T.; Kamon, T.; Mueller, R.; Pakhotin, Y.; Patel, R.; Perloff, A.; Perniè, L.; Rathjens, D.; Safonov, A.; Tatarinov, A.; Ulmer, K. A.; Akchurin, N.; Damgov, J.; De Guio, F.; Dragoiu, C.; Dudero, P. R.; Faulkner, J.; Gurpinar, E.; Kunori, S.; Lamichhane, K.; Lee, S. W.; Libeiro, T.; Peltola, T.; Undleeb, S.; Volobouev, I.; Wang, Z.; Greene, S.; Gurrola, A.; Janjam, R.; Johns, W.; Maguire, C.; Melo, A.; Ni, H.; Sheldon, P.; Tuo, S.; Velkovska, J.; Xu, Q.; Arenton, M. W.; Barria, P.; Cox, B.; Hirosky, R.; Ledovskoy, A.; Li, H.; Neu, C.; Sinthuprasith, T.; Sun, X.; Wang, Y.; Wolfe, E.; Xia, F.; Clarke, C.; Harr, R.; Karchin, P. E.; Sturdy, J.; Zaleski, S.; Belknap, D. A.; Buchanan, J.; Caillol, C.; Dasu, S.; Dodd, L.; Duric, S.; Gomber, B.; Grothe, M.; Herndon, M.; Hervé, A.; Hussain, U.; Klabbers, P.; Lanaro, A.; Levine, A.; Long, K.; Loveless, R.; Pierro, G. A.; Polese, G.; Ruggles, T.; Savin, A.; Smith, N.; Smith, W. H.; Taylor, D.; Woods, N.; CMS Collaboration

2018-01-01

The cross sections for the production of t t bar b b bar and t t bar jj events and their ratio σ t t bar b b bar /σ t t bar jj are measured using data corresponding to an integrated luminosity of 2.3 fb-1collected in pp collisions at √{ s } = 13 TeV with the CMS detector at the LHC. Events with two leptons (e or μ) and at least four reconstructed jets, including at least two identified as b quark jets, in the final state are selected. In the full phase space, the measured ratio is 0.022 ± 0.003(stat) ± 0.006(syst), the cross section σ t t bar b b bar is 4.0 ± 0.6(stat) ± 1.3(syst) pb and σ t t bar jj is 184 ± 6(stat) ± 33(syst) pb. The measurements are compared with the standard model expectations obtained from a POWHEG simulation at next-to-leading-order interfaced with PYTHIA.

Observations and modeling of surf zone transverse finger bars at the Gold Coast, Australia

NASA Astrophysics Data System (ADS)

Ribas, F.; Doeschate, A. ten; de Swart, H. E.; Ruessink, B. G.; Calvete, D.

2014-08-01

The occurrence and characteristics of transverse finger bars at Surfers Paradise (Gold Coast, Australia) have been quantified with 4 years of time-exposure video images. These bars are attached to the inner terrace and have an oblique orientation with respect to the coastline. They are observed during 24 % of the study period, in patches up to 15 bars, with an average lifetime of 5 days and a mean wavelength of 32 m. The bars are observed during obliquely incident waves of intermediate heights. Bar crests typically point toward the incoming wave direction, i.e., they are up-current oriented. The most frequent beach state when bars are present (43 % of the time) is a rhythmic low-tide terrace and an undulating outer bar. A morphodynamic model, which describes the feedback between waves, currents, and bed evolution, has been applied to study the mechanisms for finger bar formation. Realistic positive feedback leading to the formation of the observed bars only occurs if the sediment resuspension due to roller-induced turbulence is included. This causes the depth-averaged sediment concentration to decrease in the seaward direction, enhancing the convergence of sediment transport in the offshore-directed flow perturbations that occur over the up-current bars. The longshore current strength also plays an important role; the offshore root-mean-square wave height and angle must be larger than some critical values (0.5 m and 20∘, respectively, at 18-m depth). Model-data comparison indicates that the modeled bar shape characteristics (up-current orientation) and the wave conditions leading to the bar formation agree with data, while the modeled wavelengths and migration rates are larger than the observed ones. The discrepancies might be because in the model we neglect the influence of the large-scale beach configuration.

Storage and residence time of suspended sediment in gravel bars of Difficult Run, VA

NASA Astrophysics Data System (ADS)

George, J.; Benthem, A.; Pizzuto, J. E.; Skalak, K.

2016-12-01

Reducing the export of suspended sediment is an important consideration for restoring water quality to the Chesapeake Bay, but sediment budgets for in-channel landforms are poorly constrained. We quantified fine (< 2 mm) sediment storage and residence times for gravel bars at two reaches along Difficult Run, a 5th order tributary to the Potomac River. Eight gravel bars were mapped in a 150m headwater reach at Miller Heights (bankfull width 11m; total bar volume 114 m3) and 6 gravel bars were mapped in a 160m reach downstream near Leesburg Pike (bankfull width 19m; total bar volume 210 m3). Grain size analyses of surface and subsurface samples from 2 bars at each reach indicate an average suspended sediment content of 55%, suggesting a total volume of suspended sediment stored in the mapped bars to be 178 m3, or 283000 kg, comprising 5% of the average annual suspended sediment load of the two study reaches. Estimates of the annual bedload flux at Miller Heights based on stream gaging records and the Wilcock-Crowe bedload transport equation imply that the bars are entirely reworked at least annually. Scour chains installed in 2 bars at each site (a total of 50 chains) recorded scour and fill events during the winter and spring of 2016. These data indicate that 38% of the total volume of the bars is exchanged per year, for a residence time of 2.6 ± 1.2 years, a value we interpret as the residence time of suspended sediment stored in the bars. These results are supported by mapping of topographic changes derived from structure-from-motion analyses of digital aerial imagery. Storage in alluvial bars therefore represents a significant component of the suspended sediment budget of mid-Atlantic streams.

Bar formation as driver of gas inflows in isolated disc galaxies

NASA Astrophysics Data System (ADS)

Fanali, R.; Dotti, M.; Fiacconi, D.; Haardt, F.

2015-12-01

Stellar bars are a common feature in massive disc galaxies. On a theoretical ground, the response of gas to a bar is generally thought to cause nuclear starbursts and, possibly, AGN activity once the perturbed gas reaches the central supermassive black hole. By means of high-resolution numerical simulations, we detail the purely dynamical effects that a forming bar exerts on the gas of an isolated disc galaxy. The galaxy is initially unstable to the formation of non-axisymmetric structures, and within ˜1 Gyr it develops spiral arms that eventually evolve into a central stellar bar on kpc scale. A first major episode of gas inflow occurs during the formation of the spiral arms while at later times, when the stellar bar is establishing, a low-density region is carved between the bar corotational and inner Lindblad resonance radii. The development of such `dead zone' inhibits further massive gas inflows. Indeed, the gas inflow reaches its maximum during the relatively fast bar-formation phase and not, as often assumed, when the bar is fully formed. We conclude that the low efficiency of long-lived, evolved bars in driving gas towards galactic nuclei is the reason why observational studies have failed to establish an indisputable link between bars and AGNs. On the other hand, the high efficiency in driving strong gas inflows of the intrinsically transient process of bar formation suggests that the importance of bars as drivers of AGN activity in disc galaxies has been overlooked so far. We finally prove that our conclusions are robust against different numerical implementations of the hydrodynamics routinely used in galaxy evolution studies.

Uncertainties in the deprojection of the observed bar properties

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zou, Yanfei; Shen, Juntai; Li, Zhao-Yu, E-mail: jshen@shao.ac.cn

2014-08-10

In observations, it is important to deproject the two fundamental quantities characterizing a bar, i.e., its length (a) and ellipticity (e), to face-on values before any careful analyses. However, systematic estimation on the uncertainties of the commonly used deprojection methods is still lacking. Simulated galaxies are well suited in this study. We project two simulated barred galaxies onto a two-dimensional (2D) plane with different bar orientations and disk inclination angles (i). Bar properties are measured and deprojected with the popular deprojection methods in the literature. Generally speaking, deprojection uncertainties increase with increasing i. All of the deprojection methods behave badlymore » when i is larger than 60°, due to the vertical thickness of the bar. Thus, future statistical studies of barred galaxies should exclude galaxies more inclined than 60°. At moderate inclination angles (i ≤ 60°), 2D deprojection methods (analytical and image stretching), and Fourier-based methods (Fourier decomposition and bar-interbar contrast) perform reasonably well with uncertainties ∼10% in both the bar length and ellipticity, whereas the uncertainties of the one-dimensional (1D) analytical deprojection can be as high as 100% in certain extreme cases. We find that different bar measurement methods show systematic differences in the deprojection uncertainties. We further discuss the deprojection uncertainty factors with the emphasis on the most important one, i.e., the three-dimensional structure of the bar itself. We construct two triaxial toy bar models that can qualitatively reproduce the results of the 1D and 2D analytical deprojections; they confirm that the vertical thickness of the bar is the main source of uncertainties.« less

33 CFR 13.01-40 - Miniature medals and bars.

Code of Federal Regulations, 2012 CFR

2012-07-01

... GENERAL DECORATIONS, MEDALS, RIBBONS AND SIMILAR DEVICES Gold and Silver Lifesaving Medals, Bars, and Miniatures § 13.01-40 Miniature medals and bars. (a) Miniature Gold and Silver Lifesaving Medals and bars are...

33 CFR 13.01-45 - Replacement of medals and bars.

Code of Federal Regulations, 2014 CFR

2014-07-01

... SECURITY GENERAL DECORATIONS, MEDALS, RIBBONS AND SIMILAR DEVICES Gold and Silver Lifesaving Medals, Bars, and Miniatures § 13.01-45 Replacement of medals and bars. The Gold or Silver Lifesaving Medal or bar...

33 CFR 13.01-45 - Replacement of medals and bars.

Code of Federal Regulations, 2011 CFR

2011-07-01

... SECURITY GENERAL DECORATIONS, MEDALS, RIBBONS AND SIMILAR DEVICES Gold and Silver Lifesaving Medals, Bars, and Miniatures § 13.01-45 Replacement of medals and bars. The Gold or Silver Lifesaving Medal or bar...

33 CFR 13.01-45 - Replacement of medals and bars.

Code of Federal Regulations, 2010 CFR

2010-07-01

... SECURITY GENERAL DECORATIONS, MEDALS, RIBBONS AND SIMILAR DEVICES Gold and Silver Lifesaving Medals, Bars, and Miniatures § 13.01-45 Replacement of medals and bars. The Gold or Silver Lifesaving Medal or bar...

33 CFR 13.01-45 - Replacement of medals and bars.

Code of Federal Regulations, 2012 CFR

2012-07-01

... SECURITY GENERAL DECORATIONS, MEDALS, RIBBONS AND SIMILAR DEVICES Gold and Silver Lifesaving Medals, Bars, and Miniatures § 13.01-45 Replacement of medals and bars. The Gold or Silver Lifesaving Medal or bar...

33 CFR 13.01-40 - Miniature medals and bars.

Code of Federal Regulations, 2013 CFR

2013-07-01

... GENERAL DECORATIONS, MEDALS, RIBBONS AND SIMILAR DEVICES Gold and Silver Lifesaving Medals, Bars, and Miniatures § 13.01-40 Miniature medals and bars. (a) Miniature Gold and Silver Lifesaving Medals and bars are...

33 CFR 13.01-45 - Replacement of medals and bars.

Code of Federal Regulations, 2013 CFR

2013-07-01

... SECURITY GENERAL DECORATIONS, MEDALS, RIBBONS AND SIMILAR DEVICES Gold and Silver Lifesaving Medals, Bars, and Miniatures § 13.01-45 Replacement of medals and bars. The Gold or Silver Lifesaving Medal or bar...

33 CFR 13.01-40 - Miniature medals and bars.

Code of Federal Regulations, 2011 CFR

2011-07-01

... GENERAL DECORATIONS, MEDALS, RIBBONS AND SIMILAR DEVICES Gold and Silver Lifesaving Medals, Bars, and Miniatures § 13.01-40 Miniature medals and bars. (a) Miniature Gold and Silver Lifesaving Medals and bars are...

33 CFR 13.01-40 - Miniature medals and bars.

Code of Federal Regulations, 2010 CFR

2010-07-01

... GENERAL DECORATIONS, MEDALS, RIBBONS AND SIMILAR DEVICES Gold and Silver Lifesaving Medals, Bars, and Miniatures § 13.01-40 Miniature medals and bars. (a) Miniature Gold and Silver Lifesaving Medals and bars are...

33 CFR 13.01-40 - Miniature medals and bars.

Code of Federal Regulations, 2014 CFR

2014-07-01

... GENERAL DECORATIONS, MEDALS, RIBBONS AND SIMILAR DEVICES Gold and Silver Lifesaving Medals, Bars, and Miniatures § 13.01-40 Miniature medals and bars. (a) Miniature Gold and Silver Lifesaving Medals and bars are...

A large community outbreak of salmonellosis caused by intentional contamination of restaurant salad bars.

PubMed

Török, T J; Tauxe, R V; Wise, R P; Livengood, J R; Sokolow, R; Mauvais, S; Birkness, K A; Skeels, M R; Horan, J M; Foster, L R

1997-08-06

This large outbreak of foodborne disease highlights the challenge of investigating outbreaks caused by intentional contamination and demonstrates the vulnerability of self-service foods to intentional contamination. To investigate a large community outbreak of Salmonella Typhimurium infections. Epidemiologic investigation of patients with Salmonella gastroenteritis and possible exposures in The Dalles, Oregon. Cohort and case-control investigations were conducted among groups of restaurant patrons and employees to identify exposures associated with illness. A community in Oregon. Outbreak period was September and October 1984. A total of 751 persons with Salmonella gastroenteritis associated with eating or working at area restaurants. Most patients were identified through passive surveillance; active surveillance was conducted for selected groups. A case was defined either by clinical criteria or by a stool culture yielding S Typhimurium. The outbreak occurred in 2 waves, September 9 through 18 and September 19 through October 10. Most cases were associated with 10 restaurants, and epidemiologic studies of customers at 4 restaurants and of employees at all 10 restaurants implicated eating from salad bars as the major risk factor for infection. Eight (80%) of 10 affected restaurants compared with only 3 (11%) of the 28 other restaurants in The Dalles operated salad bars (relative risk, 7.5; 95% confidence interval, 2.4-22.7; P<.001). The implicated food items on the salad bars differed from one restaurant to another. The investigation did not identify any water supply, food item, supplier, or distributor common to all affected restaurants, nor were employees exposed to any single common source. In some instances, infected employees may have contributed to the spread of illness by inadvertently contaminating foods. However, no evidence was found linking ill employees to initiation of the outbreak. Errors in food rotation and inadequate refrigeration on ice-chilled salad bars may have facilitated growth of the S Typhimurium but could not have caused the outbreak. A subsequent criminal investigation revealed that members of a religious commune had deliberately contaminated the salad bars. An S Typhimurium strain found in a laboratory at the commune was indistinguishable from the outbreak strain. This outbreak of salmonellosis was caused by intentional contamination of restaurant salad bars by members of a religious commune.

Cloud structure on Uranus as constrained by near IR 1.1-1.8 micron spectra.

NASA Astrophysics Data System (ADS)

Sromovsky, L. A.; Fry, P. M.

2005-08-01

Three uranian cloud layers were identified by West et al. (Uranus, Univ. Arizona Press, 1991): an optically thin stratospheric haze, an optically thicker methane haze (0.4 < τ < 1) primarily in the 1.2-1.3 bar region, and a cloud of unknown composition near 3 bars. Using improved methane band models of Irwin et al. (BAAS, this issue) we were able to test this paradigm using near-IR spectra covering 1.1-1.8 μ m, a range well suited for distinguishing the main cloud levels. We assumed a 2-cloud model in which the lower cloud is opaque and the upper cloud consists of broken opaque elements. The pressure and fractional coverage of the upper cloud and the pressure and albedo of the lower cloud were adjusted to fit the 1975 geometric albedo spectrum of Fink and Larsen (ApJ 233, 1021-40, 1979), with the following results (first two rows): Fit Range & Upper & Upper & Lower & Lower & (μ m) & P (bars) & Fraction(%) & P (bars) & Albedo (%) & χ2 1.175-1.34 & 2.2±0.15 & 2.8±0.4 & 6.6+1.2-0.7 & 6.5±0.8 & 206 1.450-1.70 & 1.8±0.10 & 2.2±0.3 & 5.2+0.8-0.4 & 3.3±0.3& 223 1.175-1.34 & 1.25 (fixed) & 0.15±0.08 & 3.1 (fixed) & 6.6±0.8 & 296 1.450-1.70 & 1.25 (fixed) & 0.66±0.05 & 3.1 (fixed) & 4.4±0.1 & 281 Fixing clouds at paradigm pressures of 1.25 bars and 3.1 bars yields a significant reduction in fit quality and a very small upper cloud contribution (last two rows). The paradigm-violating best-fit results are consistent with an analysis of seven-band Keck AO imaging observations (Sromovsky and Fry, in preparation), which concludes that the 1.2-bar cloud is at best a minor contributor to Uranus' reflectivity and that latitudinal variations in brightness are mainly controlled by deeper clouds. How prior results can be explained in the context of these new results remains to be determined. This research was supported by a grant from NASA's Planetary Astronomy Program.

Coffee straw can replace Hader bar for bar retained overdentures--a clinical report.

PubMed

Guttal, S S; Shetty, U S

2012-12-01

Bar attachment system provides retention and support for the overdenture. Retention of a mandibular denture can be achieved by an implant-retained or natural tooth-retained bar and stud attachment in the anterior segment of the mandible. A simple and cost effective treatment for more complex implant overdenture is the concept of conventional tooth-retained overdentures. The authors present a clinical report of a patient treated with a mandibular tooth-borne overdenture with a bar. The bar was fabricated using a coffee straw.

A clinical decision-making model for repeat surgical treatment of pectus Bar displacement: distance measurement after nuss procedure.

PubMed

Sa, Young Jo; Lee, Jongho; Jeong, Jin Yong; Choi, Moonhee; Park, Soo Seog; Sim, Sung Bo; Jo, Keon Hyon

2016-01-19

Bar displacement is one of the most common and serious complications after the Nuss procedure. However, measurements of and factors affecting bar displacement have not been reported. The objectives of this study were to develop a decision model to guide surgeons considering repeat treatment and to estimate optimal cut-off values to determine whether reoperation to correct bar displacement is warranted. From July 2011 to August 2013, ninety bars were inserted in 61 patients who underwent Nuss procedures for pectus excavatum. Group A did not need surgical intervention and Group B required reoperation for bar displacement. Bar position was measured as the distance from the posterior superior end of the sternal body to the upper border of the metal bar on lateral chest radiographs. The bar displacement index (BDI) was calculated using D0 - Dx / D0 x 100 (D0: bar position the day after surgery; Dx: minimal or maximal distance of bar position on the following postoperative days). The optimal cut-off values of BDI warranting reoperation were assessed on the basis of ROC curve analysis. Of the 61 patients, 32 had single bars inserted whereas 29 had parallel bars inserted. There was a significant difference in age (14.0 ± 7.5 vs. 23.3 ± 12.0, p = 0.0062), preoperative Haller index (HI) (4.0 ± 1.1 vs. 5.0 ± 1.0, p = 0.033), and postoperative HI (2.7 ± 0.4 vs. 3.2 ± 0.5 p = 0.006) between the two groups. The optimal cut-off value of BDI was 8.7. We developed a BDI model for surgeons considering performing reoperation after Nuss procedure. The optimal cut-off value of BDI was 8.7. This model may help surgeons to decide objectively whether corrective surgery should be performed. The main factors affecting the relationship between bar displacement and reoperation were age and preoperative HI.

Scanning electron microscopy observations of failures of implant overdenture bars: a case series report.

PubMed

Waddell, J Neil; Payne, Alan G T; Swain, Michael V; Kieser, Jules A

2010-03-01

Soldered or cast bars are used as a standard of care in attachment systems supporting maxillary and mandibular implant overdentures. When failures of these bars occur, currently there is a lack of evidence in relation to their specific etiology, location, or nature. To investigate the failure process of a case series of six failed soldered bars, four intact soldered bars, and one intact cast milled bar, which had been supporting implant overdentures. A total of 11 different overdenture bars were removed from patients with different configuration of opposing arches. A failed bar (FB) group (n = 6) had failed soldered overdenture bars, which were recovered from patients following up to 2 years of wear before requiring prosthodontic maintenance and repair. An intact bar (IB) group (n = 5) had both soldered bars and a single cast milled bar, which had been worn by patients for 2 to 5 years prior to receiving other aspects of prosthodontic maintenance. All bars were examined using scanning electron microscopy to establish the possible mode of failure (FB) or to identify evidence of potential failure in the future (IB). Evidence of a progressive failure mode of corrosion fatigue and creep were observed on all the FB and IB usually around the solder areas and nonoxidizing gold cylinder. Fatigue and creep were also observed in all the IB. Where the level of corrosion was substantial, there was no evidence of wear from the matrices of the attachment system. Evidence of an instantaneous failure mode, ductile and brittle overload, was observed on the fracture surfaces of all the FB, within the solder and the nonoxidizing gold cylinders, at the solder/cylinder interface. Corrosion, followed by corrosion fatigue, appears to be a key factor in the onset of the failure process for overdenture bars in this case series of both maxillary and mandibular overdentures. Limited sample size and lack of standardization identify trends only but prevent broad interpretation of the findings.

Application of the BAR score as a predictor of short- and long-term survival in liver transplantation patients.

PubMed

de Campos Junior, Ivan Dias; Stucchi, Raquel Silveira Bello; Udo, Elisabete Yoko; Boin, Ilka de Fátima Santana Ferreira

2015-01-01

The balance of risk (BAR) is a prediction system after liver transplantation. To assess the BAR system, a retrospective observational study was performed in 402 patients who had transplant surgery between 1997 and 2012. The BAR score was computed for each patient. Receiver operating characteristic curve analysis with the Hosmer-Lemeshow test was used to calculate sensitivity, specificity, and model calibration. The cutoff value with the best Youden index was selected. Statistical analysis employed the Kaplan-Meier method (log-rank test) for survival, the Mann-Whitney test for group comparison, and multiple logistic regression analysis. 3-month survival was 46% for BAR ≥ 11 and 77% for BAR <11 (p = 0.001); 12-month survival was 44% for BAR ≥ 11 and 69% for BAR <11 (p = 0.001). Factors of survival <3 months were BAR ≥ 11 [odds ratio (OR) 3.08; 95% confidence interval (CI) 1.75-5.42; p = 0.001] and intrasurgical use of packed red blood cells (RBC) above 6 units (OR 4.49; 95% CI 2.73-7.39; p = 0.001). For survival <12 months, factors were BAR ≥ 11 (OR 2.94; 95% CI 1.67-5.16; p = 0.001) and RBC >6 units (OR 2.99; 95% CI 1.92-4.64; p = 0.001). Our study contributes to the incorporation of the BAR system into Brazilian transplantation centers.

The BAR Domain Proteins: Molding Membranes in Fission, Fusion, and Phagy

PubMed Central

Ren, Gang; Vajjhala, Parimala; Lee, Janet S.; Winsor, Barbara; Munn, Alan L.

2006-01-01

The Bin1/amphiphysin/Rvs167 (BAR) domain proteins are a ubiquitous protein family. Genes encoding members of this family have not yet been found in the genomes of prokaryotes, but within eukaryotes, BAR domain proteins are found universally from unicellular eukaryotes such as yeast through to plants, insects, and vertebrates. BAR domain proteins share an N-terminal BAR domain with a high propensity to adopt α-helical structure and engage in coiled-coil interactions with other proteins. BAR domain proteins are implicated in processes as fundamental and diverse as fission of synaptic vesicles, cell polarity, endocytosis, regulation of the actin cytoskeleton, transcriptional repression, cell-cell fusion, signal transduction, apoptosis, secretory vesicle fusion, excitation-contraction coupling, learning and memory, tissue differentiation, ion flux across membranes, and tumor suppression. What has been lacking is a molecular understanding of the role of the BAR domain protein in each process. The three-dimensional structure of the BAR domain has now been determined and valuable insight has been gained in understanding the interactions of BAR domains with membranes. The cellular roles of BAR domain proteins, characterized over the past decade in cells as distinct as yeasts, neurons, and myocytes, can now be understood in terms of a fundamental molecular function of all BAR domain proteins: to sense membrane curvature, to bind GTPases, and to mold a diversity of cellular membranes. PMID:16524918

Tobacco free workplace policies and low socioeconomic status female bartenders in San Francisco.

PubMed

Moore, Roland S; Lee, Juliet P; Antin, Tamar M J; Martin, Scott E

2006-09-01

Multiple studies have found that, compared with employees in other settings, workers in bars and restaurants have been exposed to high levels of secondhand smoke, putting them at increased risk for health complications. Among these bar employees are many women of low socioeconomic status (SES). Smoke free workplace ordinances have been extended to bars and restaurants in cities and states throughout the USA; some bars, however, continue to be out of compliance with these laws. The objective of this study is to assess the relation between bartender gender and smoke free workplace compliance in bars. This paper reports on analyses of observational data on compliance with smoke free workplace policy in 121 randomly selected bars together with qualitative data from semi-structured interviews with bartenders and patrons in bars. San Francisco County bars. Findings from this research showed that smoke free policy non-compliance was associated with bars in which women were bartenders, increasing their tobacco exposure compared with male bartenders. In interviews, although some female bartenders expressed ambivalence toward the smoke free ordinance, many others described experiencing positive health and social consequences when the bars in which they worked could eliminate interior smoking. The analyses presented here shed light on the benefits of improving the workplace environment for low SES female bartenders through the extension of strong smoke free workplace policies to all workplaces, including bars.

Evaluation of longitudinal joint tie bar system.

DOT National Transportation Integrated Search

2011-09-01

"An adequate longitudinal joint tie bar system is essential in the overall performance of concrete pavement. Excessive : longitudinal joint openings are believed to be caused by either inadequate tie bar size or spacing or improper tie bar : installa...

Ultrasound-Guided Bar Edge Labeling in the Perioperative Assessment of Nuss Bar Removal.

PubMed

Incerti, Filippo; Bertocchini, Alessia; Ghionzoli, Marco; Messineo, Antonio

2017-12-01

Nuss bar removal after minimally invasive repair of pectus excavatum in patients where bar ends are not palpable, can be a challenging procedure for the surgeon; a blind dissection toward the bar edges may lead to intercostal vessels or deep intercostal muscle injuries. In this article, we describe a fast, repeatable, low-cost technique to detect bar edge and stabilizers. A perioperative scan is performed by means of a portable ultrasonograph a few minutes before the operation. The bar edge stabilizer is detected as a hyperechogenic image with a concentric crescent while the bar edge is detected as a hyperechogenic dashed line with net edges. The scan is performed, and the actual projection on the skin of the metal plaque bulk is then labeled on the patient's chest by an ink marker. We believe that this method may improve morbidity, operative time, and consequently, hospitalization length and costs.

Associated production of the Z boson with a pair of top quarks in the left-right twin Higgs model

NASA Astrophysics Data System (ADS)

Han, Jinzhong; Yang, Bingfang; Zhang, Xiantu

2014-02-01

In the context of the left-right twin Higgs (LRTH) model, we first examine the effects on the Zt\\bar t production at the ILC and LHC. Our results show that the cross-sections can be significantly deviated from the standard model predictions and thus provide a good probe for the LRTH model. We also estimate the new production channel, Zt\\bar T or Z\\bar tT production, at the LHC. Compared with Zt \\bar t production, we find that the Z t \\bar T production can have a sizable production rate when the scale f is not too high. Considering the dominant decay mode T\\rightarrow\\phi^{+}b\\rightarrow tb\\bar b , we find that Z t\\bar T final state has less background than Zt\\bar t production and may likely be observable at the LHC.

Calculations of antiproton-nucleus quasi-bound states using the Paris N bar N potential

NASA Astrophysics Data System (ADS)

Hrtánková, Jaroslava; Mareš, Jiří

2018-01-01

An optical potential constructed using the p bar N scattering amplitudes derived from the 2009 version of the Paris N bar N potential is applied in calculations of p bar quasi-bound states in selected nuclei across the periodic table. A proper self-consistent procedure for treating energy dependence of the amplitudes in a nucleus appears crucial for evaluating p bar binding energies and widths. Particular attention is paid to the role of P-wave amplitudes. While the P-wave potential nearly does not affect calculated p bar binding energies, it reduces considerably the corresponding widths. The Paris S-wave potential supplemented by a phenomenological P-wave term yields in dynamical calculations p bar binding energies Bpbar ≈ 200 MeV and widths Γpbar ∼ 200- 230 MeV, which is very close to the values obtained within the RMF model consistent with p bar -atom data.

[Trial of eye drops recognizer for visually disabled persons].

PubMed

Okamoto, Norio; Suzuki, Katsuhiko; Mimura, Osamu

2009-01-01

The development of a device to enable the visually disabled to differentiate eye drops and their dose. The new instrument is composed of a voice generator and a two-dimensional bar-code reader (LS9208). We designed voice outputs for the visually disabled to state when (number of times) and where (right, left, or both) to administer eye drops. We then determined the minimum bar-code size that can be recognized. After attaching bar-codes of the appropriate size to the lateral or bottom surface of the eye drops container, the readability of the bar-codes was compared. The minimum discrimination bar-code size was 6 mm high x 8.5 mm long. Bar-codes on the bottom surface could be more easily recognized than bar-codes on the side. Our newly-developed device using bar-codes enables visually disabled persons to differentiate eye drops and their doses.