Sample records for control board aecb

  1. Interpretation of ALARA in the Canadian regulatory framework

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Utting, R.

    1995-03-01

    The Atomic Energy Control Board (AECB) is responsible for the regulation of all aspects of atomic energy in Canada. This includes the complete nuclear fuel cycle from uranium mining to long-term disposal of nuclear fuel, as well as the medical and industrial utilization of radioisotopes. Clearly, the regulatory approach will differ from practice to practice but, as far as possible, the AECB has attempted to minimize the degree of prescription of regulatory requirements. The traditional modus operandi of the AECB has been to have broad general principles enshrined in regulations with the requirement that licensees submit specific operating policies andmore » procedures to the AECB for approval. In the large nuclear facilities with their sophisticated technical infrastructures, this policy has been largely successful although in a changing legal and political milieu the AECB is finding that a greater degree of proactive regulation is becoming necessary. With the smaller users, the AECB has for a long time found it necessary to have a greater degree of prescription in its regulatory function. Forthcoming General Amendments to the Atomic Energy Control Regulations will, amongst other things, formally incorporate the concept of ALARA into the Canadian regulatory framework. Within the broad range of practices licensed by the AECB it is not practical to provide detailed guidance on optimization that will be relevant and appropriate to all licensees, however the following general principles are proposed.« less

  2. Calyx{trademark} EA implementation at AECB

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1997-12-31

    This report describes a project to examine the applicability of a knowledge-based decision support software for environmental assessment (Calyx) to assist the Atomic Energy Control Board in environmental screenings, assessment, management, and database searches. The report begins with background on the Calyx software and then reviews activities with regard to modification of the Calyx knowledge base for application to the nuclear sector. This is followed by lists of standard activities handled by the software and activities specific to the Board; the hierarchy of environmental components developed for the Board; details of impact rules that describe the conditions under which environmentalmore » impacts will occur (the bulk of the report); information on mitigation and monitoring rules and on instance data; and considerations for future work on implementing Calyx at the Board. Appendices include an introduction to expert systems and an overview of the Calyx knowledge base structure.« less

  3. Cost and clinical consequence of antibiotic non-adherence in acute exacerbations of chronic bronchitis.

    PubMed

    Sorensen, S V; Baker, T; Fleurence, R; Dixon, J; Roberts, C; Haider, S; Hughes, D

    2009-08-01

    To quantify the impact of non-adherence on the clinical effectiveness of antibiotics for acute exacerbations of chronic bronchitis (AECB) and to estimate the economic consequences for Spain, Italy and the United States. Standard systematic reviewing procedures were followed to identify randomised controlled clinical trials of antibiotic treatment for acute respiratory tract infection for which adherence was reported. A decision-analytic model was then constructed to evaluate the impact of non-adherence to antibiotic treatment on clinical effectiveness and costs per AECB episode. The model compared the total treatment costs, cure rates and incremental costs per cure for a poor compliance group (PCG) against a good compliance group (GCG). Clinical and resource use estimates were from the published literature and physician surveys. Twenty-five articles met the criteria of the systematic review, although only one reported treatment success by adherence status. The relative risk of clinical effectiveness if non-adherent was 0.75 (95%CI 0.73-0.78). Based on this single study, the model predicted that 16-29% more patients would be cured in the GCG vs. the PCG, and payers would save up to euro122, euro179 and US$141 per AECB episode in Spain, Italy and the United States, respectively. Non-adherence to antibiotics for AECB may have an impact on clinical effectiveness, which is associated with increased costs.

  4. Acute exacerbations of chronic bronchitis: a pharmacoeconomic review of antibacterial use.

    PubMed

    Morris, Stephen; Anderson, Pippa; Irwin, Debra E

    2002-01-01

    Chronic bronchitis is a common problem affecting a large proportion of the adult population. People with chronic bronchitis are subject to recurrent attacks of bronchial inflammation called acute exacerbations of chronic bronchitis (AECBs). In patients with AECBs, symptoms may worsen due to a bacterial infection; the exacerbation is then known as an acute bacterial exacerbation of chronic bronchitis (ABECB). ABECBs are thought to be controllable through the use of antibacterial agents. In this paper we review current evidence on the cost of chronic bronchitis and AECBs, the cost effectiveness of antibacterials in the management of ABECB, and the factors that may affect the cost-effectiveness of antibacterials in the management of ABECB. We find that the number of economic evaluations conducted in this area is small. Of the few economic evaluations that have been conducted there has been only one prospective economic evaluation based on a clinical trial. The remainder are simple decision analysis-based modelling studies or retrospective database studies. Our principle findings are as follows: a key factor affecting the cost-effective use of antibacterials in the management of ABECB is the definitive diagnosis of the condition. Unfortunately, diagnosing a bacterial cause of an AECB is difficult, which presents problems in ensuring that antibacterials are not prescribed unnecessarily;current evidence suggests but does not prove that use of more effective but more costly first-line antibacterials may be relatively cost effective and may minimise overall expenditure by reducing the high costs associated with treatment failure;chronic bronchitis and AECB have a significant and negative physical and psychological effect on health-related quality of life. In conclusion, the small number of economic evaluations conducted in this area, coupled with the nature of the design of these studies, precludes a definitive statement recommending which specific antibacterial should be preferred on cost-effectiveness grounds for the management of ABECB. On the basis of our findings we suggest some topics for further research.

  5. Sputum colour and bacteria in chronic bronchitis exacerbations: a pooled analysis.

    PubMed

    Miravitlles, Marc; Kruesmann, Frank; Haverstock, Daniel; Perroncel, Renee; Choudhri, Shurjeel H; Arvis, Pierre

    2012-06-01

    We examined the correlation between sputum colour and the presence of potentially pathogenic bacteria in acute exacerbations of chronic bronchitis (AECBs). Data were pooled from six multicentre studies comparing moxifloxacin with other antimicrobials in patients with an AECB. Sputum was collected before antimicrobial therapy, and bacteria were identified by culture and Gram staining. Association between sputum colour and bacteria was determined using logistic regression. Of 4,089 sputum samples, a colour was reported in 4,003; 1,898 (46.4%) were culture-positive. Green or yellow sputum samples were most likely to yield bacteria (58.9% and 45.5% of samples, respectively), compared with 18% of clear and 39% of rust-coloured samples positive for potentially pathogenic microorganisms. Factors predicting a positive culture were sputum colour (the strongest predictor), sputum purulence, increased dyspnoea, male sex and absence of fever. Green or yellow versus white sputum colour was associated with a sensitivity of 94.7% and a specificity of 15% for the presence of bacteria. Sputum colour, particularly green and yellow, was a stronger predictor of potentially pathogenic bacteria than sputum purulence and increased dyspnoea in AECB patients. However, it does not necessarily predict the need for antibiotic treatment in all patients with AECB.

  6. Clinical efficacy of farcosolvin syrup (ambroxol–theophylline–guaiphenesin mixture) in the treatment of acute exacerbation of chronic bronchitis

    PubMed Central

    Yakoot, Mostafa; Salem, Amel; Omar, Abdel-Mohsen

    2010-01-01

    Background: Acute exacerbations of chronic bronchitis (AECB) are defined as recurrent attacks of worsening bronchial inflammation that are marked by an increase in the volume of daily sputum produced, a change in color of the expectorated sputum, and worsening dyspnea. Farcosolvin® (Pharco Pharmaceuticals, Alexandria, Egypt) is a mixture of ambroxol (15 mg); theophylline (50 mg); and guaiphenesin (30 mg), per 5 mL syrup. Objective: To test the clinical efficacy of Farcosolvin in the treatment of AECB in a randomized, single-blinded, controlled study design. Patients and methods: One hundred patients with AECB were randomized to either Farcosolvin or guaiphenesin treatment groups, in addition to the standard medical treatment for their cases. Baseline clinical symptomatolgy of breathlessness, cough, and sputum severity scoring were compared before and after 3 and 7 days of treatment in both groups and the differences compared between groups. Changes in perceived improvement were also compared between groups using the Clinical Global Impression of Improvement or Change Scale (CGIC). Results: There were statistically significant improvements in breathlessness and cough scores in both groups (pretreatment versus posttreatment at day 3 and at day 7; P < 0.05). There were highly statistically significant differences between groups in improvement in breathlessness and cough scores, after 3 and 7 days treatment, in favor of the Farcosolvin treatment group (P < 0.001). Out of 50 patients, 48 (96%) in the Farcosolvin-treated group rated their improvement on the CGIC scale as “much” and “very much” improved, while only 41 patients (82%) reported such a degree of improvement in the control group. The difference was statistically significant (P < 0.05). Conclusion: We concluded from our study that Farcosolvin syrup might be safe and effective in improving symptoms in cases of acute exacerbation of chronic bronchitis. PMID:20714379

  7. Annual report on the AECB research and support program, 1997--1998. Report number INFO-0698

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1998-12-31

    The AECB-funded extramural Research and Support Program provides access to independent advice, expertise, and information via contracts placed in the private sector and with other agencies and organizations in Canada and elsewhere. This report presents information on the scope of activities in the Program during the year and describes how the Program was managed, organized, and carried out. Information on individual sub-programs is presented in such fields as nuclear reactors, fuel cycle facilities, uranium mines and mills, waste management, dosimetry, health physics, and regulatory process development. A list of individual projects and their expenditures is appended.

  8. Levofloxacin for the treatment of respiratory tract infections.

    PubMed

    Torres, Antoni; Liapikou, Adamantia

    2012-06-01

    Fluoroquinolone use has dramatically increased since the introduction of the first respiratory fluoroquinolone in the late 1990s. Levofloxacin , like other fluoquinolones, is a potent antibiotic, due to high levels of susceptibility among Gram-negative, Gram-positive (including penicillin-resistant strains of Streptococcus pneumonia) and atypical pathogens. Levofloxacin is recommended for the treatment of community-acquired pneumonia (CAP), hospital-acquired pneumonia (HAP) and in the management of acute exacerbations of chronic bronchitis (AECB). Levofloxacin demonstrates good safety, bioavailability and tissue penetration, thus maintaining adequate concentrations at the site of infection. High-dose (750 mg), short-course (5 days) therapy regimens may offer improved treatment, especially in HAP, due to higher drug concentrations, increased adherence and the potential to reduce the development of resistance. This article covers medical literature published in any language since 1990 until November 2011, on 'levofloxacin', identified using PubMed and MEDLINE. The search terms used were 'levofloxacin' and 'community acquired pneumonia', 'hospital pneumonia' or 'AECB'. Levofloxacin is a valuable antimicrobial agent and an optimal treatment option for AECB, CAP (as a monotherapy) and HAP (as combination therapy at a high-dose regimen). Its improved bioavailability and safety profile makes the possibility of shorter hospital stays a reality.

  9. Primary and Immortalized Human Respiratory Cells Display Different Patterns of Cytotoxicity and Cytokine Release upon Exposure to Deoxynivalenol, Nivalenol and Fusarenon-X

    PubMed Central

    Ferreira Lopes, Silvia; Vacher, Gaëlle; Savova-Bianchi, Dessislava

    2017-01-01

    The type B trichothecene mycotoxins deoxynivalenol (DON), nivalenol (NIV) and fusarenon-X (FX) are structurally related secondary metabolites frequently produced by Fusarium on wheat. Consequently, DON, NIV and FX contaminate wheat dusts, exposing grain workers to toxins by inhalation. Those trichothecenes at low, relevant, exposition concentrations have differential effects on intestinal cells, but whether such differences exist with respiratory cells is mostly unknown, while it is required to assess the combined risk of exposure to mycotoxins. The goal of the present study was to compare the effects of DON, NIV and FX alone or in combination on the viability and IL-6 and IL-8-inducing capacity of human epithelial cells representative of the respiratory tract: primary human airway epithelial cells of nasal (hAECN) and bronchial (hAECB) origin, and immortalized human bronchial (16HBE14o-) and alveolar (A549) epithelial cell lines. We report that A549 cells are particularly resistant to the cytotoxic effects of mycotoxins. FX is more toxic than DON and NIV for all epithelial cell types. Nasal and bronchial primary cells are more sensitive than bronchial and alveolar cell lines to combined mycotoxin mixtures at low concentrations, although they are less sensitive to mycotoxins alone. Interactions between mycotoxins at low concentrations are rarely additive and are observed only for DON/NIV and NIV/FX on hAECB cells and DON/NIV/FX on A549 cells. Most interactions at low mycotoxin concentrations are synergistic, antagonistic interactions being observed only for DON/FX on hAECB, DON/NIV on 16HBE14o- and NIV/FX on A549 cells. DON, NIV and FX induce, albeit at different levels, IL-6 and IL-8 release by all cell types. However, NIV and FX at concentrations of low cytotoxicity induce IL-6 release by hAECB and A549 cells, and IL-8 release by hAECN cells. Overall, these data suggest that combined exposure to mycotoxins at low concentrations have a stronger effect on primary nasal epithelial cells than on bronchial epithelial cells and activate different inflammatory pathways. This information is particularly relevant for future studies about the hazard of occupational exposure to mycotoxins by inhalation and its impact on the respiratory tract. PMID:29068378

  10. Performance in practice: bacteriological efficacy in patients with drug-resistant S. pneumoniae.

    PubMed

    Garau, J

    2004-04-01

    Using pharmacokinetic/pharmacodynamic principles, pharmacokinetically enhanced amoxicillin/clavulanate 2000/125 mg twice daily was designed to provide adequate levels of amoxicillin over the 12-h dosing interval to eradicate penicillin-resistant Streptococcus pneumoniae (PRSP, penicillin MICs > or = 2 mg/L) with amoxicillin MICs of at least 4 mg/L. The clinical efficacy of amoxicillin/clavulanate 2000/125 mg was evaluated in patients with respiratory tract infections caused by S. pneumoniae, including isolates with elevated penicillin (2-8 mg/L) MICs. Data from 10 clinical studies were combined: seven randomised (1:1), double-blind, controlled trials (efficacy intent-to-treat [ITT]N = 3376): amoxicillin/clavulanate 2000/125 mg twice daily vs. levofloxacin 500 mg once daily in acute bacterial sinusitis (ABS); levofloxacin 500 mg once daily in acute exacerbations of chronic bronchitis (AECB); clarithromycin 500 mg twice daily in AECB; amoxicillin/clavulanate 875/125 mg twice daily/three times daily and 1000/125 mg three times daily in community-acquired pneumonia (CAP) and three noncomparative studies (efficacy ITT N = 3024): two in ABS, one in CAP. The bacteriological per-protocol (PP) population at follow up (days 14-39) comprised 1295 patients for amoxicillin/clavulanate 2000/125 mg and 241 for comparators. With amoxicillin/clavulanate 2000/125 mg at follow-up, outcome was successful (clinical success and eradication/presumed eradication) in 85/90 (94.4%) patients with S. pneumoniae in comparative studies and 421/445 (94.6%) in noncomparative studies, and with comparators 58/70 (82.9%) were successes. In the amoxicillin/clavulanate 2000/125 mg group at follow up, 52/552 S. pneumoniae isolates were resistant to penicillin. At follow up, 50/52 (96.2%) patients with PRSP were successes, including 6/7 with amoxicillin MICs of 4 mg/L and 7/8 with amoxicillin MICs of 8 mg/L. Success rates for amoxicillin/clavulanate 2000/125 mg against PRSP were similar for CAP (96.0%[24/25]), AECB (100%[3/3]) and ABS (95.8%[23/24]). There were six PRSP isolates in the comparator group (two isolates were from one patient), and three of five patients in this group were successes. In conclusion, amoxicillin/clavulanate 2000/125 mg demonstrated combined clinical/bacteriological success against 50/52 patients with PRSP, including 13/15 strains with amoxicillin MICs of 4-8 mg/L. These results for the pharmacokinetic-enhanced formulation of amoxicillin/clavulanate 2000/125 mg are in line with the high efficacy against PRSP predicted using pharmacokinetic/pharmacodynamic parameters.

  11. Characterisation of a collection of Streptococcus pneumoniae isolates from patients suffering from acute exacerbations of chronic bronchitis: in vitro susceptibility to antibiotics and biofilm formation in relation to antibiotic efflux and serotypes/serogroups.

    PubMed

    Vandevelde, Nathalie M; Tulkens, Paul M; Diaz Iglesias, Yvan; Verhaegen, Jan; Rodriguez-Villalobos, Hector; Philippart, Ivan; Cadrobbi, Julie; Coppens, Nathalie; Boel, An; Van Vaerenbergh, Kristien; Francart, Hugo; Vanhoof, Raymond; Liistro, Giuseppe; Jordens, Paul; d'Odemont, Jean-Paul; Valcke, Yvan; Verschuren, Franck; Van Bambeke, Françoise

    2014-09-01

    The correlation between Streptococcus pneumoniae serotypes, biofilm production, antibiotic susceptibility and drug efflux in isolates from patients suffering from acute exacerbations of chronic bronchitis (AECB) remains largely unexplored. Using 101 isolates collected from AECB patients for whom partial (n=51) or full (n=50) medical details were available, we determined serotypes (ST)/serogroups (SG) (Quellung reaction), antibiotic susceptibility patterns [MIC (microdilution) using EUCAST and CLSI criteria] and ability to produce biofilm in vitro (10-day model; crystal violet staining). The majority of patients were 55-75 years old and <5% were vaccinated against S. pneumoniae. Moreover, 54% showed high severity scores (GOLD 3-4), and comorbidities were frequent including hypertension (60%), cancer (24%) and diabetes (20%). Alcohol and/or tobacco dependence was >30%. Isolates of SG6-11-15-23, known for large biofilm production and causing chronic infections, were the most prevalent (>15% each), but other isolates also produced biofilm (SG9-18-22-27 and ST8-20 being most productive), except SG7, SG29 and ST5 (<2% of isolates each). Resistance (EUCAST breakpoints) was 8-13% for amoxicillin and cefuroxime, 35-39% for macrolides, 2-8% for fluoroquinolones and 2% for telithromycin. ST19A isolates showed resistance to all antibiotics, ST14 to all except moxifloxacin, and SG9 and SG19 to all except telithromycin, moxifloxacin and ceftriaxone (SG19 only). Solithromycin and telithromycin MICs were similar. No correlation was observed between biofilm production and MIC or efflux (macrolides, fluoroquinolones). S. pneumoniae serotyping may improve AECB treatment by avoiding antibiotics with predictable low activity, but it is not predictive of biofilm production. Copyright © 2014 Elsevier B.V. and the International Society of Chemotherapy. All rights reserved.

  12. Bronchopulmonary pharmacokinetic and pharmacodynamic profiles of levofloxacin 750 mg once daily in adults undergoing treatment for acute exacerbation of chronic bronchitis.

    PubMed

    Nicolau, David P; Sutherland, Christina; Winget, Donna; Baughman, Robert P

    2012-02-01

    While previous reports have described the bronchopulmonary profile of the fluoroquinolones in healthy volunteers, limited data are available in infected patients. The purpose of this study was to determine the intrapulmonary profile of high-dose (750 mg) levofloxacin in patients during an acute exacerbation of chronic bronchitis (AECB). Twenty-four patients experiencing clinical signs and symptoms of AECB were enrolled. Once enrolled, patients received levofloxacin 750 mg once daily × 5 days. Bronchoalveolar lavage aspirates and simultaneous plasma samples were obtained at 4 h, 12 h or 24 h after the third dose. Concentrations in biologic matrixes were determined with a validated HPLC method. Epithelial lining fluid (ELF) concentrations were calculated using the urea dilution method. Five patients did not complete the trial, 19 patients underwent bronchoscopy, 18 (52 ± 13 yrs) had sufficient samples for analysis and confirmed medication compliance. Mean plasma concentrations at 4, 12, and 24 h were 8.0 ± 2.5, 5.8 ± 1.2, and 2.2 ± 1.2 μg/mL. Mean ELF values at 4, 12, and 24 h were 7.5 ± 3.0, 8.3 ± 6.0, and 1.2 ± 0.9 μg/mL. Mean alveolar macrophage (AM) concentrations at 4, 12, and 24 h were 38.5 ± 43.7, 13.4 ± 14.4, and 9.0 ± 7.5 μg/mL. The penetration (ELF/plasma ratio) into the infection site was 113%. In these subjects with AECB, levofloxacin 750 mg once daily reached adequate exposures in the plasma, ELF, and AMs for the most commonly associated pathogens. Copyright © 2011 Elsevier Ltd. All rights reserved.

  13. Clinical significance of the infection-free interval in the management of acute bacterial exacerbations of chronic bronchitis.

    PubMed

    Chodosh, Sanford

    2005-06-01

    Rational and appropriate antibiotic use for patients with acute exacerbation of chronic bronchitis (AECB) is a major concern, as approximately half of these patients do not have a bacterial infection. Typically, the result of antimicrobial therapy for patients with acute bacterial exacerbation of chronic bronchitis (ABECB) is not eradication of the pathogen but resolution of the acute symptoms. However, the length of time before the next bacterial exacerbation can be another important variable, as the frequency of exacerbations will affect the overall health of the patient and the rate of lung deterioration over time. Clinical trials comparing antimicrobial therapies commonly measure resolution of symptoms in AECB patients as the primary end point, regardless of whether the exacerbation is documented as bacterial in nature. Ideally, the scientific approach to assessing the efficacy of antibiotic therapy for ABECB should include a measurement of acute bacterial eradication rates in patients with documented bronchial bacterial infection followed by measurement of the infection-free interval (IFI), ie, the time to the next ABECB. The use of these variables can provide a standard for comparing various antimicrobial therapies. As we learn more about how antibiotics can affect the IFI, treatment decisions should be adapted to ensure optimal management of ABECB for the long-term.

  14. Comparison of the efficacy of extended-release clarithromycin tablets and amoxicillin/clavulanate tablets in the treatment of acute exacerbation of chronic bronchitis.

    PubMed

    Anzueto, A; Fisher, C L; Busman, T; Olson, C A

    2001-01-01

    Clarithromycin has established efficacy and safety in the treatment of respiratory infections. This study examined the efficacy and safety of a new extended-release formulation of clarithromycin compared with amoxicillin/clavulanate in the treatment of acute exacerbation of chronic bronchitis (AECB). This phase IIIB, multicenter, randomized, parallel-group, investigator-blinded study in patients with AECB and productive cough with purulent sputum compared treatment with extended-release clarithromycin (two 500-mg tablets once daily for 7 days) and amoxicillin/clavulanate (one 875-mg tablet twice daily for 10 days). Assessments were performed before treatment, between study days 10 and 12 (or within 48 hours after premature discontinuation), and between study days 17 and 21 (test of cure). Of 287 patients randomized and treated, 270 were clinically evaluable (137 clarithromycin, 133 amoxicillin/clavulanate). Treatment groups were well matched in terms of demographic characteristics, medical condition, and history. Among clinically evaluable patients at test of cure, 85% and 87% of clarithromycin- and amoxicillin/clavulanate-treated patients, respectively, demonstrated clinical cure (as defined in 1998 draft US Food and Drug Administration guidelines); among clinically and bacteriologically evaluable patients, 92% versus 89%, respectively, demonstrated bacteriologic cure. Overall pathogen eradication rates were similar in the 2 groups (88% clarithromycin, 89% amoxicillin/clavulanate). Rates of premature discontinuation of study drug for any reason differed between treatments: 3% (4/142) of clarithromycin-treated patients versus 12% (17/145) of amoxicillin/clavulanate-treated patients (P = 0.005). One percent (2/142) and 6% (8/145) of the respective treatment groups discontinued study drug because of adverse events. Adverse events generally occurred with a similar frequency in the 2 groups; however, taste alteration was more common with clarithromycin (9/142 [6%]) than with amoxicillin/clavulanate (1/145 [1%]; P = 0.01). Mean severity scores for gastrointestinal adverse events showed a significant difference between groups (1.16 for clarithromycin-treated patients and 1.58 for amoxicillin/clavulanate-treated patients: P = 0.016). The results of this study demonstrate the clinical and bacteriologic equivalence and improved gastrointestinal tolerability of a 7-day course of once-daily extended-release clarithromycin relative to a 10-day course of twice-daily amoxicillin/clavulanate in the treatment of AECB.

  15. CRITIC2: A program for real-space analysis of quantum chemical interactions in solids

    NASA Astrophysics Data System (ADS)

    Otero-de-la-Roza, A.; Johnson, Erin R.; Luaña, Víctor

    2014-03-01

    We present CRITIC2, a program for the analysis of quantum-mechanical atomic and molecular interactions in periodic solids. This code, a greatly improved version of the previous CRITIC program (Otero-de-la Roza et al., 2009), can: (i) find critical points of the electron density and related scalar fields such as the electron localization function (ELF), Laplacian, … (ii) integrate atomic properties in the framework of Bader’s Atoms-in-Molecules theory (QTAIM), (iii) visualize non-covalent interactions in crystals using the non-covalent interactions (NCI) index, (iv) generate relevant graphical representations including lines, planes, gradient paths, contour plots, atomic basins, … and (v) perform transformations between file formats describing scalar fields and crystal structures. CRITIC2 can interface with the output produced by a variety of electronic structure programs including WIEN2k, elk, PI, abinit, Quantum ESPRESSO, VASP, Gaussian, and, in general, any other code capable of writing the scalar field under study to a three-dimensional grid. CRITIC2 is parallelized, completely documented (including illustrative test cases) and publicly available under the GNU General Public License. Catalogue identifier: AECB_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AECB_v2_0.html Program obtainable from: CPC Program Library, Queen’s University, Belfast, N. Ireland Licensing provisions: yes No. of lines in distributed program, including test data, etc.: 11686949 No. of bytes in distributed program, including test data, etc.: 337020731 Distribution format: tar.gz Programming language: Fortran 77 and 90. Computer: Workstations. Operating system: Unix, GNU/Linux. Has the code been vectorized or parallelized?: Shared-memory parallelization can be used for most tasks. Classification: 7.3. Catalogue identifier of previous version: AECB_v1_0 Journal reference of previous version: Comput. Phys. Comm. 180 (2009) 157 Nature of problem: Analysis of quantum-chemical interactions in periodic solids by means of atoms-in-molecules and related formalisms. Solution method: Critical point search using Newton’s algorithm, atomic basin integration using bisection, qtree and grid-based algorithms, diverse graphical representations and computation of the non-covalent interactions index on a three-dimensional grid. Additional comments: !!!!! The distribution file for this program is over 330 Mbytes and therefore is not delivered directly when download or Email is requested. Instead a html file giving details of how the program can be obtained is sent. !!!!! Running time: Variable, depending on the crystal and the source of the underlying scalar field.

  16. 7 CFR 7.27 - Political activity.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... members of school boards, soil conservation district boards, weed control district boards, or of similar..., irrigation district boards, drainage district boards, weed control district boards, or for similar boards are...

  17. 7 CFR 7.27 - Political activity.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... members of school boards, soil conservation district boards, weed control district boards, or of similar..., irrigation district boards, drainage district boards, weed control district boards, or for similar boards are...

  18. 40 CFR 62.7856 - Albuquerque/Bernalillo County Air Quality Control Board.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Albuquerque/Bernalillo County Air Quality Control Board. (a) Identification of Plan. Albuquerque-Bernalillo... County Air Quality Control Board on November 9, 2005. (b) Identification of Sources. The plan applies to... County Air Quality Control Board that commenced construction prior to May 30, 1991, and have not been...

  19. Controlling front-end electronics boards using commercial solutions

    NASA Astrophysics Data System (ADS)

    Beneyton, R.; Gaspar, C.; Jost, B.; Schmeling, S.

    2002-04-01

    LHCb is a dedicated B-physics experiment under construction at CERN's large hadron collider (LHC) accelerator. This paper will describe the novel approach LHCb is taking toward controlling and monitoring of electronics boards. Instead of using the bus in a crate to exercise control over the boards, we use credit-card sized personal computers (CCPCs) connected via Ethernet to cheap control PCs. The CCPCs will provide a simple parallel, I2C, and JTAG buses toward the electronics board. Each board will be equipped with a CCPC and, hence, will be completely independently controlled. The advantages of this scheme versus the traditional bus-based scheme will be described. Also, the integration of the controls of the electronics boards into a commercial supervisory control and data acquisition (SCADA) system will be shown.

  20. Critic: a new program for the topological analysis of solid-state electron densities

    NASA Astrophysics Data System (ADS)

    Otero-de-la-Roza, A.; Blanco, M. A.; Pendás, A. Martín; Luaña, Víctor

    2009-01-01

    In this paper we introduce CRITIC, a new program for the topological analysis of the electron densities of crystalline solids. Two different versions of the code are provided, one adapted to the LAPW (Linear Augmented Plane Wave) density calculated by the WIEN2K package and the other to the ab initio Perturbed Ion ( aiPI) density calculated with the PI7 code. Using the converged ground state densities, CRITIC can locate their critical points, determine atomic basins and integrate properties within them, and generate several graphical representations which include topological atomic basins and primary bundles, contour maps of ρ and ∇ρ, vector maps of ∇ρ, chemical graphs, etc. Program summaryProgram title: CRITIC Catalogue identifier: AECB_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AECB_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GPL, version 3 No. of lines in distributed program, including test data, etc.: 1 206 843 No. of bytes in distributed program, including test data, etc.: 12 648 065 Distribution format: tar.gz Programming language: FORTRAN 77 and 90 Computer: Any computer capable of compiling Fortran Operating system: Unix, GNU/Linux Classification: 7.3 Nature of problem: Topological analysis of the electron density in periodic solids. Solution method: The automatic localization of the electron density critical points is based on a recursive partitioning of the Wigner-Seitz cell into tetrahedra followed by a Newton search from significant points on each tetrahedra. Plotting of and integration on the atomic basins is currently based on a new implementation of Keith's promega algorithm. Running time: Variable, depending on the task. From seconds to a few minutes for the localization of critical points. Hours to days for the determination of the atomic basins shape and properties. Times correspond to a typical 2007 PC.

  1. 32 CFR 631.9 - Duties and functions of boards.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... ENFORCEMENT AND CRIMINAL INVESTIGATIONS ARMED FORCES DISCIPLINARY CONTROL BOARDS AND OFF-INSTALLATION LIAISON AND OPERATIONS Armed Forces Disciplinary Control Boards § 631.9 Duties and functions of boards. The... 32 National Defense 4 2011-07-01 2011-07-01 false Duties and functions of boards. 631.9 Section...

  2. 32 CFR 631.9 - Duties and functions of boards.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... ENFORCEMENT AND CRIMINAL INVESTIGATIONS ARMED FORCES DISCIPLINARY CONTROL BOARDS AND OFF-INSTALLATION LIAISON AND OPERATIONS Armed Forces Disciplinary Control Boards § 631.9 Duties and functions of boards. The... 32 National Defense 4 2010-07-01 2010-07-01 true Duties and functions of boards. 631.9 Section 631...

  3. 33 CFR 223.1 - Mississippi River Water Control Management Board.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 3 2012-07-01 2012-07-01 false Mississippi River Water Control Management Board. 223.1 Section 223.1 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE BOARDS, COMMISSIONS, AND COMMITTEES § 223.1 Mississippi River Water Control Management Board. (a) Purpose. This...

  4. 33 CFR 223.1 - Mississippi River Water Control Management Board.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 3 2013-07-01 2013-07-01 false Mississippi River Water Control Management Board. 223.1 Section 223.1 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE BOARDS, COMMISSIONS, AND COMMITTEES § 223.1 Mississippi River Water Control Management Board. (a) Purpose. This...

  5. 21. DETAIL INTERIOR VIEW OF ORIGINAL BENCH BOARD CONTROLS IN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    21. DETAIL INTERIOR VIEW OF ORIGINAL BENCH BOARD CONTROLS IN CONTROL ROOM ON LEVEL +77 OF POWERHOUSE #1; THESE PANELS ARE ON LEFT SIDE OF BENCH BOARD CONTROLS. - Bonneville Project, Powerhouse No.1, Spanning Bradford Slough, from Bradford Island, Bonneville, Multnomah County, OR

  6. 40 CFR 52.720 - Identification of plan.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Protection Agency on March 13, 1972. (2) Copies of the Illinois Pollution Control Board Regulations, Chapter... role of the Chicago Department of Environmental Control was submitted July 28, 1972, by the State... Pollution Control Board. (6) Compliance schedules submitted on April 3, 1973, by the Pollution Control Board...

  7. 40 CFR 52.720 - Identification of plan.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Protection Agency on March 13, 1972. (2) Copies of the Illinois Pollution Control Board Regulations, Chapter... role of the Chicago Department of Environmental Control was submitted July 28, 1972, by the State... Pollution Control Board. (6) Compliance schedules submitted on April 3, 1973, by the Pollution Control Board...

  8. Circuit design of an EMCCD camera

    NASA Astrophysics Data System (ADS)

    Li, Binhua; Song, Qian; Jin, Jianhui; He, Chun

    2012-07-01

    EMCCDs have been used in the astronomical observations in many ways. Recently we develop a camera using an EMCCD TX285. The CCD chip is cooled to -100°C in an LN2 dewar. The camera controller consists of a driving board, a control board and a temperature control board. Power supplies and driving clocks of the CCD are provided by the driving board, the timing generator is located in the control board. The timing generator and an embedded Nios II CPU are implemented in an FPGA. Moreover the ADC and the data transfer circuit are also in the control board, and controlled by the FPGA. The data transfer between the image workstation and the camera is done through a Camera Link frame grabber. The software of image acquisition is built using VC++ and Sapera LT. This paper describes the camera structure, the main components and circuit design for video signal processing channel, clock driver, FPGA and Camera Link interfaces, temperature metering and control system. Some testing results are presented.

  9. 33 CFR 223.1 - Mississippi River Water Control Management Board.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Management Board. 223.1 Section 223.1 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE... Management Board. (a) Purpose. This regulation establishes and prescribes the objectives, composition, responsibilities and authority of the Mississippi River Water Control Management Board. (b) Applicability. This...

  10. Design of the Wind Tunnel Model Communication Controller Board. Degree awarded by Christopher Newport Univ. on Dec. 1998

    NASA Technical Reports Server (NTRS)

    Wilson, William C.

    1999-01-01

    The NASA Langley Research Center's Wind Tunnel Reinvestment project plans to shrink the existing data acquisition electronics to fit inside a wind tunnel model. Space limitations within a model necessitate a distributed system of Application Specific Integrated Circuits (ASICs) rather than a centralized system based on PC boards. This thesis will focus on the design of the prototype of the communication Controller board. A portion of the communication Controller board is to be used as the basis of an ASIC design. The communication Controller board will communicate between the internal model modules and the external data acquisition computer. This board is based around an Field Programmable Gate Array (FPGA), to allow for reconfigurability. In addition to the FPGA, this board contains buffer Random Access Memory (RAM), configuration memory (EEPROM), drivers for the communications ports, and passive components.

  11. 33 CFR 223.1 - Mississippi River Water Control Management Board.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Management Board. 223.1 Section 223.1 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE BOARDS, COMMISSIONS, AND COMMITTEES § 223.1 Mississippi River Water Control Management Board. (a) Purpose. This regulation establishes and prescribes the objectives, composition...

  12. 33 CFR 223.1 - Mississippi River Water Control Management Board.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Management Board. 223.1 Section 223.1 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE BOARDS, COMMISSIONS, AND COMMITTEES § 223.1 Mississippi River Water Control Management Board. (a) Purpose. This regulation establishes and prescribes the objectives, composition...

  13. 77 FR 3843 - Agency Information Collection (Board of Veterans' Appeals Customer Satisfaction With Hearing...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-25

    ... DEPARTMENT OF VETERANS AFFAIRS [OMB Control No. 2900-0548] Agency Information Collection (Board of Veterans' Appeals Customer Satisfaction With Hearing Survey) Under OMB Review AGENCY: Board of Veterans.... Title: Board of Veterans' Appeals Customer Satisfaction with Hearing Survey, VA Form 0745. OMB Control...

  14. Multicopter control with Navio using REX control system

    NASA Astrophysics Data System (ADS)

    Golembiovsky, Matej; Dedek, Jan; Ozana, Stepan

    2017-06-01

    This article deals with study of possible connection of the REXcontrols platform with Raspberry Pi based control system and Navio2 expansion board. This board is designed for development of autonomous robotic platforms type car, plane or multicopter. In this article, control system REXcontrols is introduced and its integration possibilities for control board Navio2 are discussed. The main discussed aspects are communication possibilities of the REXcontrols system with external scripts which further on allow control of this board. The main reasons for this undertaking are vast possibilities of archiving, visualization, signal processing and control which REXcontrols system allows. The control itself of the navio2 board is done through numerous interfaces. Specifically it is a pair of SPI data buses, an I2C data bus, UART and multiple GPIO pins. However, since REXcontrols control system has only limited access to these data buses, it is necessary to establish the communication through external scripts. For this purpose REXcontrols is equipped with mechanisms; SILO, EPC and REXLANG which are described in the article. Due to its simple implementation into REXcontrols and the option to utilize available libraries for communication with Navio2 board in external script, an EPC block was selected for the final implementation.

  15. Politics of Decision Making in Relation to Education in Comparative Perspective, Unity and Diversity as a Problem. Centralization and Decentralization in Decision Making: The Lay Board of Control.

    ERIC Educational Resources Information Center

    Pfnister, Allan O.

    The evolution and role of the lay board of control (trustees, directors) of higher educational institutions and the part the board has played or may play in maintaining diversity in the American system are examined. The evolution of the lay board in the United States and in the United Kingdom is described. The lay board has become "the…

  16. An active balance board system with real-time control of stiffness and time-delay to assess mechanisms of postural stability.

    PubMed

    Cruise, Denise R; Chagdes, James R; Liddy, Joshua J; Rietdyk, Shirley; Haddad, Jeffrey M; Zelaznik, Howard N; Raman, Arvind

    2017-07-26

    Increased time-delay in the neuromuscular system caused by neurological disorders, concussions, or advancing age is an important factor contributing to balance loss (Chagdes et al., 2013, 2016a,b). We present the design and fabrication of an active balance board system that allows for a systematic study of stiffness and time-delay induced instabilities in standing posture. Although current commercial balance boards allow for variable stiffness, they do not allow for manipulation of time-delay. Having two controllable parameters can more accurately determine the cause of balance deficiencies, and allows us to induce instabilities even in healthy populations. An inverted pendulum model of human posture on such an active balance board predicts that reduced board rotational stiffness destabilizes upright posture through board tipping, and limit cycle oscillations about the upright position emerge as feedback time-delay is increased. We validate these two mechanisms of instability on the designed balance board, showing that rotational stiffness and board time-delay induced the predicted postural instabilities in healthy, young adults. Although current commercial balance boards utilize control of rotational stiffness, real-time control of both stiffness and time-delay on an active balance board is a novel and innovative manipulation to reveal balance deficiencies and potentially improve individualized balance training by targeting multiple dimensions contributing to standing balance. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. SOLARTRAK. Solar Array Tracking Control

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Manish, A.B.; Dudley, J.

    1995-06-01

    SolarTrak used in conjunction with various versions of 68HC11-based SolarTrack hardware boards provides control system for one or two axis solar tracking arrays. Sun position is computed from stored position data and time from an on-board clock/calendar chip. Position feedback can be by one or two offset motor turn counter square wave signals per axis, or by a position potentiometer. A limit of 256 counts resolution is imposed by the on-board analog to digital (A/D) convertor. Control is provided for one or two motors. Numerous options are provided to customize the controller for specific applications. Some options are imposed atmore » compile time, some are setable during operation. Software and hardware board designs are provided for Control Board and separate User Interface Board that accesses and displays variables from Control Board. Controller can be used with range of sensor options ranging from a single turn count sensor per motor to systems using dual turn-count sensors, limit sensors, and a zero reference sensor. Dual axis trackers oriented azimuth elevation, east west, north south, or polar declination can be controlled. Misalignments from these orientations can also be accommodated. The software performs a coordinate transformation using six parameters to compute sun position in misaligned coordinates of the tracker. Parameters account for tilt of tracker in two directions, rotation about each axis, and gear ration errors in each axis. The software can even measure and compute these prameters during an initial setup period if current from a sun position sensor or output from photovoltaic array is available as an anlog voltage to the control board`s A/D port. Wind or emergency stow to aj present position is available triggered by digital or analog signals. Night stow is also available. Tracking dead band is adjustable from narrow to wide. Numerous features of the hardware and software conserve energy for use with battery powered systems.« less

  18. Solar Array Tracking Control

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Maish, Alexander

    1995-06-22

    SolarTrak used in conjunction with various versions of 68HC11-based SolarTrack hardware boards provides control system for one or two axis solar tracking arrays. Sun position is computed from stored position data and time from an on-board clock/calendar chip. Position feedback can be by one or two offset motor turn counter square wave signals per axis, or by a position potentiometer. A limit of 256 counts resolution is imposed by the on-board analog to digital (A/D) convertor. Control is provided for one or two motors. Numerous options are provided to customize the controller for specific applications. Some options are imposed atmore » compile time, some are setable during operation. Software and hardware board designs are provided for Control Board and separate User Interface Board that accesses and displays variables from Control Board. Controller can be used with range of sensor options ranging from a single turn count sensor per motor to systems using dual turn-count sensors, limit sensors, and a zero reference sensor. Dual axis trackers oriented azimuth elevation, east west, north south, or polar declination can be controlled. Misalignments from these orientations can also be accommodated. The software performs a coordinate transformation using six parameters to compute sun position in misaligned coordinates of the tracker. Parameters account for tilt of tracker in two directions, rotation about each axis, and gear ration errors in each axis. The software can even measure and compute these prameters during an initial setup period if current from a sun position sensor or output from photovoltaic array is available as an anlog voltage to the control board''s A/D port. Wind or emergency stow to aj present position is available triggered by digital or analog signals. Night stow is also available. Tracking dead band is adjustable from narrow to wide. Numerous features of the hardware and software conserve energy for use with battery powered systems.« less

  19. Who Controls the Board in Non-Profit Organizations? The Case of Private Higher Education Institutions in Colombia

    ERIC Educational Resources Information Center

    Bradford, Henry; Guzmán, Alexander; Restrepo, José Manuel; Trujillo, María-Andrea

    2018-01-01

    How should the governance system in a non-membership non-profit organization be designed? This organizational form has no shareholders; instead, donors provide funds. Thus, at the organizational level, the board of directors could have all the power. Under this legal form, who controls the board? If too powerful, boards could misuse resources or…

  20. Considering chance in quality and safety performance measures: an analysis of performance reports by boards in English NHS trusts.

    PubMed

    Schmidtke, Kelly Ann; Poots, Alan J; Carpio, Juan; Vlaev, Ivo; Kandala, Ngianga-Bakwin; Lilford, Richard J

    2017-01-01

    Hospital board members are asked to consider large amounts of quality and safety data with a duty to act on signals of poor performance. However, in order to do so it is necessary to distinguish signals from noise (chance). This article investigates whether data in English National Health Service (NHS) acute care hospital board papers are presented in a way that helps board members consider the role of chance in their decisions. Thirty English NHS trusts were selected at random and their board papers retrieved. Charts depicting quality and safety were identified. Categorical discriminations were then performed to document the methods used to present quality and safety data in board papers, with particular attention given to whether and how the charts depicted the role of chance, that is, by including control lines or error bars. Thirty board papers, containing a total of 1488 charts, were sampled. Only 88 (6%) of these charts depicted the role of chance, and only 17 of the 30 board papers included any charts depicting the role of chance. Of the 88 charts that attempted to represent the role of chance, 16 included error bars and 72 included control lines. Only 6 (8%) of the 72 control charts indicated where the control lines had been set (eg, 2 vs 3 SDs). Hospital board members are expected to consider large amounts of information. Control charts can help board members distinguish signals from noise, but often boards are not using them. We discuss demand-side and supply-side barriers that could be overcome to increase use of control charts in healthcare. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  1. A novel study design for antibiotic trials in acute exacerbations of COPD: MAESTRAL methodology

    PubMed Central

    Wilson, Robert; Anzueto, Antonio; Miravitlles, Marc; Arvis, Pierre; Faragó, Geneviève; Haverstock, Daniel; Trajanovic, Mila; Sethi, Sanjay

    2011-01-01

    Antibiotics, along with oral corticosteroids, are standard treatments for acute exacerbations of chronic obstructive pulmonary disease (AECOPD). The ultimate aims of treatment are to minimize the impact of the current exacerbation, and by ensuring complete resolution, reduce the risk of relapse. In the absence of superiority studies of antibiotics in AECOPD, evidence of the relative efficacy of different drugs is lacking, and so it is difficult for physicians to select the most effective antibiotic. This paper describes the protocol and rationale for MAESTRAL (moxifloxacin in AECBs [acute exacerbation of chronic bronchitis] trial; www.clinicaltrials.gov: NCT00656747), one of the first antibiotic comparator trials designed to show superiority of one antibiotic over another in AECOPD. It is a prospective, multinational, multicenter, randomized, double-blind controlled study of moxifloxacin (400 mg PO [ per os] once daily for 5 days) vs amoxicillin/clavulanic acid (875/125 mg PO twice daily for 7 days) in outpatients with COPD and chronic bronchitis suffering from an exacerbation. MAESTRAL uses an innovative primary endpoint of clinical failure: the requirement for additional or alternate treatment for the exacerbation at 8 weeks after the end of antibiotic therapy, powered for superiority. Patients enrolled are those at high-risk of treatment failure, and all are experiencing an Anthonisen type I exacerbation. Patients are stratified according to oral corticosteroid use to control their effect across antibiotic treatment arms. Secondary endpoints include quality of life, symptom assessments and health care resource use. PMID:21760724

  2. Hospital power structure and the democratization of hospital administration in Quebec.

    PubMed

    Eakin, J M

    1984-01-01

    In 1973, the Canadian Province of Quebec 'democratized' its hospital boards of directors by replacing the previous 'elite' boards by boards representative of the hospitals' major interest groups. This study looks at the impact of these participatory boards on the distribution of power within hospitals, particularly their effect on the hospital administrators' position of control in relation to their boards of directors and medical staff. Findings include a deterioration in the administrators' sense of organizational control, a weakening of the boards' authority over physicians, and a concentration of decision-making outside of the boardroom.

  3. On-board congestion control for satellite packet switching networks

    NASA Technical Reports Server (NTRS)

    Chu, Pong P.

    1991-01-01

    It is desirable to incorporate packet switching capability on-board for future communication satellites. Because of the statistical nature of packet communication, incoming traffic fluctuates and may cause congestion. Thus, it is necessary to incorporate a congestion control mechanism as part of the on-board processing to smooth and regulate the bursty traffic. Although there are extensive studies on congestion control for both baseband and broadband terrestrial networks, these schemes are not feasible for space based switching networks because of the unique characteristics of satellite link. Here, we propose a new congestion control method for on-board satellite packet switching. This scheme takes into consideration the long propagation delay in satellite link and takes advantage of the the satellite's broadcasting capability. It divides the control between the ground terminals and satellite, but distributes the primary responsibility to ground terminals and only requires minimal hardware resource on-board satellite.

  4. Development of an ATCA IPMI controller mezzanine board to be used in the ATCA developments for the ATLAS Liquid Argon upgrade

    NASA Astrophysics Data System (ADS)

    Dumont Dayot, Nicolas

    2012-01-01

    In the context of the LHC upgrade, we develop a new Read Out Driver (ROD) for the ATLAS Liquid Argon (LAr) community. ATCA and μTCA (Advanced/Micro Telecom Computing Architecture) is becoming a standard in high energy physics and a strong candidate to be used for boards and crates. We work to master ATCA and to integrate a large number of high speed links (96 links at 8.5 Gbps) on a ROD evaluation ATCA board. A versatile ATCA IPMI controller for ATCA boards which is FPGA Mezzanine Card (FMC) compliant has been developed to control the ROD evaluation board.

  5. FPGA Flash Memory High Speed Data Acquisition

    NASA Technical Reports Server (NTRS)

    Gonzalez, April

    2013-01-01

    The purpose of this research is to design and implement a VHDL ONFI Controller module for a Modular Instrumentation System. The goal of the Modular Instrumentation System will be to have a low power device that will store data and send the data at a low speed to a processor. The benefit of such a system will give an advantage over other purchased binary IP due to the capability of allowing NASA to re-use and modify the memory controller module. To accomplish the performance criteria of a low power system, an in house auxiliary board (Flash/ADC board), FPGA development kit, debug board, and modular instrumentation board will be jointly used for the data acquisition. The Flash/ADC board contains four, 1 MSPS, input channel signals and an Open NAND Flash memory module with an analog to digital converter. The ADC, data bits, and control line signals from the board are sent to an Microsemi/Actel FPGA development kit for VHDL programming of the flash memory WRITE, READ, READ STATUS, ERASE, and RESET operation waveforms using Libero software. The debug board will be used for verification of the analog input signal and be able to communicate via serial interface with the module instrumentation. The scope of the new controller module was to find and develop an ONFI controller with the debug board layout designed and completed for manufacture. Successful flash memory operation waveform test routines were completed, simulated, and tested to work on the FPGA board. Through connection of the Flash/ADC board with the FPGA, it was found that the device specifications were not being meet with Vdd reaching half of its voltage. Further testing showed that it was the manufactured Flash/ADC board that contained a misalignment with the ONFI memory module traces. The errors proved to be too great to fix in the time limit set for the project.

  6. 78 FR 40743 - Board of Scientific Counselors, Office of Public Health Preparedness and Response, Board of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-08

    ... Scientific Counselors, Office of Public Health Preparedness and Response, Board of Scientific Counselors (BSC... Director, Centers for Disease Control and Prevention (CDC), and the Director, Office of Public Health... Public Health Practice Executive Assistant, Centers for Disease Control and Prevention, 1600 Clifton Road...

  7. Splitter board for steamer tube readout at the SLD

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bacchetta, N.; Bisello, D.; Castro, A.

    1989-10-01

    This paper presents a controller board designed as a part of the data acquisition system for the readout of limited streamer tube strips in the warm iron calorimeter for the SLD detector. The board controls the data readout and allows for remote setting and diagnostic of the system.

  8. 77 FR 52335 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-29

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety.... Background: The Advisory Board was established under the Energy Employees Occupational Illness Compensation...

  9. 77 FR 9254 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-16

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety.... Background: The Advisory Board was established under the Energy Employees Occupational Illness Compensation...

  10. 77 FR 69486 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-19

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... people. Background: The Advisory Board was established under the Energy Employees Occupational Illness...

  11. 77 FR 43090 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-23

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... Advisory Board was established under the Energy Employees Occupational Illness Compensation Program Act of...

  12. 75 FR 35496 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-22

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... Advisory Board was established under the Energy Employees Occupational Illness Compensation Program Act of...

  13. 76 FR 5814 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-02

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety...: The Advisory Board was established under the Energy Employees Occupational Illness Compensation...

  14. 77 FR 32117 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-31

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... Advisory Board was established under the Energy Employees Occupational Illness Compensation Program Act of...

  15. 76 FR 47590 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-05

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... Advisory Board was established under the Energy Employees Occupational Illness Compensation Program Act of...

  16. 75 FR 66769 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-29

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety...: The Advisory Board was established under the Energy Employees Occupational Illness Compensation...

  17. FPGA and USB based control board for quantum random number generator

    NASA Astrophysics Data System (ADS)

    Wang, Jian; Wan, Xu; Zhang, Hong-Fei; Gao, Yuan; Chen, Teng-Yun; Liang, Hao

    2009-09-01

    The design and implementation of FPGA-and-USB-based control board for quantum experiments are discussed. The usage of quantum true random number generator, control- logic in FPGA and communication with computer through USB protocol are proposed in this paper. Programmable controlled signal input and output ports are implemented. The error-detections of data frame header and frame length are designed. This board has been used in our decoy-state based quantum key distribution (QKD) system successfully.

  18. Multi-institutional arrangements: relationships between governing boards and hospital chief executive officers.

    PubMed

    Alexander, J; Morlock, L L

    1985-02-01

    This investigation focuses on the impact of multi-institutional arrangements on the role of governing boards in limiting or enhancing the managerial autonomy of individual hospitals. Data from a 1979 Special Survey by the American Hospital Association (N = 4213) are used to examine governing board-administrator relationships as a function of the degree of autonomy and scope of responsibility of the hospital governing board. It is hypothesized that governing boards responsible for multiple hospitals or for multiple nonhospital organizations and those boards accountable to a higher organizational authority will exercise more formal control over hospital chief executive officers (CEOs) than will boards of single or autonomous hospitals. The analysis assumes that formal control by the governing board over the management function of the individual hospital is exercised partly through soliciting or limiting participation by hospital administrators in key policy decisions and through the evaluation of administrative performance. Therefore, it is anticipated that hospitals governed by boards with multiple responsibilities as well as hospitals governed by boards accountable to a higher authority will be (1) less likely to have CEOs who are members of the governing board executive committee, (2) more likely to have annual performance reviews of the CEO by the governing board, and (3) more likely to have such reviews conducted according to preestablished criteria. Study results provide general support for the hypotheses with respect to hospital boards with multiple responsibilities: the data suggest that such boards do exercise greater control over hospital administrators and these effects do appear to be stronger for hospitals in the private sector. Hospitals governed by boards accountable to a higher authority, however, are more likely to have CEOs who are members of the governing board executive committee--a pattern in direct opposition to that hypothesized. Furthermore, these boards are no more likely to conduct annual CEO performance reviews than are boards with more autonomy. Boards accountable to higher authorities are more likely, however, to use preestablished criteria when such reviews are conducted. This general pattern is similar whether hospital boards are accountable to religious authorities, to investor-owned corporate boards, or to the boards of not-for-profit multi-institutional systems. A different pattern emerges, however, for boards accountable to a state, county, or local government authority.(ABSTRACT TRUNCATED AT 400 WORDS)

  19. Multi-institutional arrangements: relationships between governing boards and hospital chief executive officers.

    PubMed Central

    Alexander, J; Morlock, L L

    1985-01-01

    This investigation focuses on the impact of multi-institutional arrangements on the role of governing boards in limiting or enhancing the managerial autonomy of individual hospitals. Data from a 1979 Special Survey by the American Hospital Association (N = 4213) are used to examine governing board-administrator relationships as a function of the degree of autonomy and scope of responsibility of the hospital governing board. It is hypothesized that governing boards responsible for multiple hospitals or for multiple nonhospital organizations and those boards accountable to a higher organizational authority will exercise more formal control over hospital chief executive officers (CEOs) than will boards of single or autonomous hospitals. The analysis assumes that formal control by the governing board over the management function of the individual hospital is exercised partly through soliciting or limiting participation by hospital administrators in key policy decisions and through the evaluation of administrative performance. Therefore, it is anticipated that hospitals governed by boards with multiple responsibilities as well as hospitals governed by boards accountable to a higher authority will be (1) less likely to have CEOs who are members of the governing board executive committee, (2) more likely to have annual performance reviews of the CEO by the governing board, and (3) more likely to have such reviews conducted according to preestablished criteria. Study results provide general support for the hypotheses with respect to hospital boards with multiple responsibilities: the data suggest that such boards do exercise greater control over hospital administrators and these effects do appear to be stronger for hospitals in the private sector. Hospitals governed by boards accountable to a higher authority, however, are more likely to have CEOs who are members of the governing board executive committee--a pattern in direct opposition to that hypothesized. Furthermore, these boards are no more likely to conduct annual CEO performance reviews than are boards with more autonomy. Boards accountable to higher authorities are more likely, however, to use preestablished criteria when such reviews are conducted. This general pattern is similar whether hospital boards are accountable to religious authorities, to investor-owned corporate boards, or to the boards of not-for-profit multi-institutional systems. A different pattern emerges, however, for boards accountable to a state, county, or local government authority.(ABSTRACT TRUNCATED AT 400 WORDS) PMID:3972592

  20. Sampling and Control Circuit Board for an Inertial Measurement Unit

    NASA Technical Reports Server (NTRS)

    Chelmins, David T (Inventor); Sands, Obed (Inventor); Powis, Richard T., Jr. (Inventor)

    2016-01-01

    A circuit board that serves as a control and sampling interface to an inertial measurement unit ("IMU") is provided. The circuit board is also configured to interface with a local oscillator and an external trigger pulse. The circuit board is further configured to receive the external trigger pulse from an external source that time aligns the local oscillator and initiates sampling of the inertial measurement device for data at precise time intervals based on pulses from the local oscillator. The sampled data may be synchronized by the circuit board with other sensors of a navigation system via the trigger pulse.

  1. WeaselBoard :

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Mulder, John C.; Schwartz, Moses Daniel; Berg, Michael J.

    2013-10-01

    Critical infrastructures, such as electrical power plants and oil refineries, rely on programmable logic controllers (PLCs) to control essential processes. State of the art security cannot detect attacks on PLCs at the hardware or firmware level. This renders critical infrastructure control systems vulnerable to costly and dangerous attacks. WeaselBoard is a PLC backplane analysis system that connects directly to the PLC backplane to capture backplane communications between modules. WeaselBoard forwards inter-module traffic to an external analysis system that detects changes to process control settings, sensor values, module configuration information, firmware updates, and process control program (logic) updates. WeaselBoard provides zero-daymore » exploit detection for PLCs by detecting changes in the PLC and the process. This approach to PLC monitoring is protected under U.S. Patent Application 13/947,887.« less

  2. BrainPort Technology Tongue Interface Characterization Tactical Underwater Navigation System (TUNS)

    DTIC Science & Technology

    2008-06-01

    Control board. We currently have 22 boards in house. … … … … … Experiment Control Workstation HDA with 2000 to 20,000 electrodes ●●● TCP/IP...Program Interface DARPA Defense Advanced Research Projects Agency HD High Density HDA High Density Array IRB Internal Review Board Tactor

  3. 75 FR 35078 - Notice of Call for Nominations for the Wild Horse and Burro Advisory Board

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-21

    ... for Nominations for the Wild Horse and Burro Advisory Board AGENCY: Bureau of Land Management... members to the Wild Horse and Burro Advisory Board (Board). The Board provides advice concerning the management, protection, and control of wild free-roaming horses and burros on the public lands administered...

  4. A temperature controller board for the ARC controller

    NASA Astrophysics Data System (ADS)

    Tulloch, Simon

    2016-07-01

    A high-performance temperature controller board has been produced for the ARC Generation-3 CCD controller. It contains two 9W temperature servo loops and four temperature input channels and is fully programmable via the ARC API and OWL data acquisition program. PI-loop control is implemented in an on-board micro. Both diode and RTD sensors can be used. Control and telemetry data is sent via the ARC backplane although a USB-2 interface is also available. Further functionality includes hardware timers and high current drivers for external shutters and calibration LEDs, an LCD display, a parallel i/o port, a pressure sensor interface and an uncommitted analogue telemetry input.

  5. National Transportation Safety Board : weak internal control impaired financial accountability

    DOT National Transportation Integrated Search

    2001-09-28

    The U. S. General Accounting Office (GAO) was asked to review the National Transportation Safety Board's (NTSB) internal controls over selected types of fiscal year expenditures. They were asked to determine whether internal control weaknesses were a...

  6. Planning assistance for the NASA 30/20 GHz program. Network control architecture study.

    NASA Technical Reports Server (NTRS)

    Inukai, T.; Bonnelycke, B.; Strickland, S.

    1982-01-01

    Network Control Architecture for a 30/20 GHz flight experiment system operating in the Time Division Multiple Access (TDMA) was studied. Architecture development, identification of processing functions, and performance requirements for the Master Control Station (MCS), diversity trunking stations, and Customer Premises Service (CPS) stations are covered. Preliminary hardware and software processing requirements as well as budgetary cost estimates for the network control system are given. For the trunking system control, areas covered include on board SS-TDMA switch organization, frame structure, acquisition and synchronization, channel assignment, fade detection and adaptive power control, on board oscillator control, and terrestrial network timing. For the CPS control, they include on board processing and adaptive forward error correction control.

  7. 77 FR 19017 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-29

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... Energy Employees Occupational Illness Compensation Program [[Page 19018

  8. 78 FR 40744 - Request for Nominations of Candidates To Serve on the Board of Scientific Counselors (BSC...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-08

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Request for Nominations of Candidates To Serve on the Board of Scientific Counselors (BSC), Office of Infectious Diseases (OID) The Centers for Disease Control and Prevention (CDC) is soliciting nominations for possible membership on the BSC, OID. This board...

  9. Design and construction of a high frame rate imaging system

    NASA Astrophysics Data System (ADS)

    Wang, Jing; Waugaman, John L.; Liu, Anjun; Lu, Jian-Yu

    2002-05-01

    A new high frame rate imaging method has been developed recently [Jian-yu Lu, ``2D and 3D high frame rate imaging with limited diffraction beams,'' IEEE Trans. Ultrason. Ferroelectr. Freq. Control 44, 839-856 (1997)]. This method may have a clinical application for imaging of fast moving objects such as human hearts, velocity vector imaging, and low-speckle imaging. To implement the method, an imaging system has been designed. The system consists of one main printed circuit board (PCB) and 16 channel boards (each channel board contains 8 channels), in addition to a set-top box for connections to a personal computer (PC), a front panel board for user control and message display, and a power control and distribution board. The main board contains a field programmable gate array (FPGA) and controls all channels (each channel has also an FPGA). We will report the analog and digital circuit design and simulations, multiplayer PCB designs with commercial software (Protel 99), PCB signal integrity testing and system RFI/EMI shielding, and the assembly and construction of the entire system. [Work supported in part by Grant 5RO1 HL60301 from NIH.

  10. 78 FR 69093 - Performance Review Board Members

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-18

    ... Review Board Members AGENCY: Centers for Disease Control and Prevention (CDC), Department of Health and... Performance Review Board Members who are reviewing performance for Fiscal Year 2013. FOR FURTHER INFORMATION... Performance Review Board Members be published in the Federal Register. The following persons will serve on the...

  11. Test-bench system for a borehole azimuthal acoustic reflection imaging logging tool

    NASA Astrophysics Data System (ADS)

    Liu, Xianping; Ju, Xiaodong; Qiao, Wenxiao; Lu, Junqiang; Men, Baiyong; Liu, Dong

    2016-06-01

    The borehole azimuthal acoustic reflection imaging logging tool (BAAR) is a new generation of imaging logging tool, which is able to investigate stratums in a relatively larger range of space around the borehole. The BAAR is designed based on the idea of modularization with a very complex structure, so it has become urgent for us to develop a dedicated test-bench system to debug each module of the BAAR. With the help of a test-bench system introduced in this paper, test and calibration of BAAR can be easily achieved. The test-bench system is designed based on the client/server model. The hardware system mainly consists of a host computer, an embedded controlling board, a bus interface board, a data acquisition board and a telemetry communication board. The host computer serves as the human machine interface and processes the uploaded data. The software running on the host computer is designed based on VC++. The embedded controlling board uses Advanced Reduced Instruction Set Machines 7 (ARM7) as the micro controller and communicates with the host computer via Ethernet. The software for the embedded controlling board is developed based on the operating system uClinux. The bus interface board, data acquisition board and telemetry communication board are designed based on a field programmable gate array (FPGA) and provide test interfaces for the logging tool. To examine the feasibility of the test-bench system, it was set up to perform a test on BAAR. By analyzing the test results, an unqualified channel of the electronic receiving cabin was discovered. It is suggested that the test-bench system can be used to quickly determine the working condition of sub modules of BAAR and it is of great significance in improving production efficiency and accelerating industrial production of the logging tool.

  12. 78 FR 66938 - Board of Scientific Counselors, Office of Public Health Preparedness and Response, Board of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-07

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Public Health Preparedness and Response, Board of Scientific Counselors (BSC.... Contact Person for More Information: Marquita Black, Executive Assistant, Office of Science and Public...

  13. 76 FR 60135 - Proposed Information Collection (Appeal to Board of Veterans' Appeals) Activity Comment Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-28

    ... DEPARTMENT OF VETERANS AFFAIRS [OMB Control No. 2900-0085] Proposed Information Collection (Appeal to Board of Veterans' Appeals) Activity Comment Request AGENCY: Board of Veterans' Appeals, Department of Veterans Affairs. ACTION: Notice. SUMMARY: The Board of Veterans' Appeals (BVA), Department of...

  14. 75 FR 9399 - Defense Health Board (DHB) Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-02

    ... DEPARTMENT OF DEFENSE Office of the Secretary Defense Health Board (DHB) Meeting AGENCY... of the Defense Health Board (DHB), will meet on March 11, 2010. Subject to the availability of space... INFORMATION: Due to internal DoD difficulties, beyond the control of the Defense Health Board or its...

  15. 76 FR 16787 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-25

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... was established under the Energy Employees Occupational Illness Compensation Program Act of 2000 to...

  16. 32 CFR 724.404 - Director, Naval Council of Personnel Boards.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 5 2010-07-01 2010-07-01 false Director, Naval Council of Personnel Boards. 724... PERSONNEL NAVAL DISCHARGE REVIEW BOARD Principal Elements of the Navy Department Discharge Review System § 724.404 Director, Naval Council of Personnel Boards. Exercises adminstrative control and oversight of...

  17. 32 CFR 724.404 - Director, Naval Council of Personnel Boards.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 5 2011-07-01 2011-07-01 false Director, Naval Council of Personnel Boards. 724... PERSONNEL NAVAL DISCHARGE REVIEW BOARD Principal Elements of the Navy Department Discharge Review System § 724.404 Director, Naval Council of Personnel Boards. Exercises adminstrative control and oversight of...

  18. Image dissector control and data system electronics, part 1, part 2, and part 3

    NASA Technical Reports Server (NTRS)

    1975-01-01

    The operating and calibration procedures, design details, and maintenance information for the control console and the associated electronics are presented. Detailed circuit connector information is included which describes the destination of each wire leaving each pin of each circuit board. The schematic diagrams of the circuit boards in the system and of the interconnection between boards and consoles are presented.

  19. 40 CFR 52.2299 - Original identification of plan section.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...), Appendix AG, Emission Reduction Commitments for Transportation Control Measures in Post-1982 SIP Areas...; as adopted by the Texas Air Control Board on October 14, 1988. (C) The following portions of the Post... Transportation Control Measures in Post-1982 SIP Areas, as adopted by the Texas Air Control Board on December 18...

  20. 40 CFR 52.2299 - Original identification of plan section.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...), Appendix AG, Emission Reduction Commitments for Transportation Control Measures in Post-1982 SIP Areas...; as adopted by the Texas Air Control Board on October 14, 1988. (C) The following portions of the Post... Transportation Control Measures in Post-1982 SIP Areas, as adopted by the Texas Air Control Board on December 18...

  1. 77 FR 30900 - Approval and Promulgation of Implementation Plans; New Mexico; Albuquerque/Bernalillo County...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-24

    ... in implementing the New Mexico Air Quality Control Act, the joint Air Quality Control Board (AQCB... Department in implementing the New Mexico Air Quality Control Act, the joint Air Quality Control Board (AQCB... Promulgation of Implementation Plans; New Mexico; Albuquerque/Bernalillo County; Fees for Permits and...

  2. Report of Apollo 204 Review Board to the Administrator, National Aeronautics and Space Administration . Appendix F ; Schedule of Physical Evidence

    NASA Technical Reports Server (NTRS)

    1967-01-01

    Immediately following the Apollo 204 accident of January 27, 1961. all associated equipment and material were impounded. Release of this equipment and material for normal use was under the close control of the Apollo 204 Review Board. Apollo Review Board Administrative Procedure No. 11, February 11, 1961, established the Apollo 204 Review Board Material Release Record (MRR). This MRR was the official form used to release material from full impoundment and was valid only after being approved by the Board and signed by a Member. The form was used as the authority to place any impounded item into one of the three Categories defined in Administrative Procedure No. 11. This appendix contains all of the authorized MRR's. Each item submitted on an MRR was given a control number; a description, including the part number and serial number; the relevance and location to the accident; any constraints before release; and the control category. The categories placed on the equipment were as follows: Category A - Items which may have a significant influence or bearing on the results or findings of the Apollo 204 Review Board; Category B - All material other than Category A which is considered relevant to the Apollo 204 Review Board investigation; Category C - Material released from Board jurisdiction. Several classes of equipment were released by special Board action prior to the establishment of the MRR system. The operating procedure for release of these classes is Enclosure F-l to this appendix.

  3. Outcome of treatment of respiratory tract infections due to Streptococcus pneumoniae, including drug-resistant strains, with pharmacokinetically enhanced amoxycillin/clavulanate.

    PubMed

    File, Thomas M; Jacobs, Michael R; Poole, Michael D; Wynne, Brian

    2002-10-01

    The efficacy of a new pharmacokinetically enhanced formulation of amoxycillin/clavulanate (AMX/CA) 2000/125 mg, twice daily, designed to provide adequate levels of amoxycillin over the 12-h dosing interval to eradicate penicillin-resistant Streptococcus pneumoniae (PRSP) with amoxycillin (+/-clavulanic acid) MICs of /=4 mg/l. In the pooled comparator group, the success rate at follow-up was 86.5% (45/52). For PRSP (AMX/CA MICs of 0.5-8 mg/l), the overall success rate was 98.2% (55/56) at follow-up for AMX/CA 2000/125 mg and 50.0% (2/4) for comparators. AMX/CA 2000/125 mg shows efficacy comparable to that of the comparators evaluated against S. pneumoniae infections. Due to its favorable pharmacokinetic/pharmacodynamic profile and promising clinical success, the new AMX/CA 2000/125 mg formulation should be considered for the empirical treatment of respiratory tract infections in regions with a high prevalence of antimicrobial-resistant S. pneumoniae and in patients at high risk of antimicrobial-resistant S. pneumoniae infection as this formulation covers many PRSP that are non-susceptible to amoxycillin (+/-clavulanic acid) (MICs of >/=4 mg/l) as well as common beta-lactamase-producing respiratory pathogens.

  4. 40 CFR 52.720 - Identification of plan.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Illinois Pollution Control Board Regulations, Chapter 2, Parts I, II and III were submitted May 4, 1972, by the Governor. (3) A document describing the role of the Chicago Department of Environmental Control...) Compliance schedules submitted on March 13, 1973, by the Pollution Control Board. (6) Compliance schedules...

  5. 77 FR 58585 - Appointment of Members of Senior Executive Services Performance Review Board

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-21

    ... OFFICE OF NATIONAL DRUG CONTROL POLICY Appointment of Members of Senior Executive Services Performance Review Board AGENCY: Office of National Drug Control Policy [ONDCP]. ACTION: Notice of... Counsel (202) 395-6709, Office of National Drug Control Policy, Executive Office of the President...

  6. 40 CFR 52.720 - Identification of plan.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Illinois Pollution Control Board Regulations, Chapter 2, Parts I, II and III were submitted May 4, 1972, by the Governor. (3) A document describing the role of the Chicago Department of Environmental Control...) Compliance schedules submitted on March 13, 1973, by the Pollution Control Board. (6) Compliance schedules...

  7. Alternative Fuels Data Center: Maps and Data

    Science.gov Websites

    control systems and appliances with off-board sources of electricity, thereby reducing the need to idle trucks to power climate control systems and appliances with off-board sources of electricity, thereby

  8. 75 FR 81277 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-27

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... under the Energy Employees Occupational Illness Compensation Program Act of 2000 to advise the President...

  9. 78 FR 11650 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-19

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... established under the Energy Employees Occupational Illness Compensation Program Act of 2000 to advise the...

  10. 78 FR 732 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-04

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... established under the Energy Employees Occupational Illness Compensation Program Act of 2000 to advise the...

  11. 75 FR 57281 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-20

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... under the Energy Employees Occupational Illness Compensation Program Act of 2000 to advise the President...

  12. 75 FR 11186 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-10

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... the Energy Employees Occupational Illness Compensation Program Act of 2000 to advise the President on...

  13. 78 FR 38347 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-26

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... Employees Occupational Illness Compensation Program Act of 2000 to advise the President on a variety of...

  14. 76 FR 71567 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-18

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety and Health (NIOSH) In accordance with section 10(a)(2) of the Federal Advisory Committee Act (Pub. L...

  15. 78 FR 69682 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-20

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention (CDC) Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety and Health (NIOSH) In accordance with section 10(a)(2) of the Federal Advisory Committee Act (Pub...

  16. 76 FR 61364 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-04

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... Energy Employees Occupational Illness Compensation Program Act of 2000 to advise the President on a...

  17. 77 FR 11547 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-27

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention (CDC) Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety and Health (NIOSH) The meeting scheduled to convene on February 28-29, 2012 was published in the...

  18. 78 FR 44954 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-25

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... established under the Energy Employees Occupational Illness Compensation Program Act of 2000 to advise the...

  19. 78 FR 21370 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-10

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... Energy Employees Occupational Illness Compensation Program Act of 2000 to advise the President on a...

  20. 76 FR 36925 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-23

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... under the Energy Employees Occupational Illness Compensation Program Act of 2000 to advise the President...

  1. 76 FR 26301 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-06

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety and Health (NIOSH) In accordance with section 10(a)(2) of the Federal Advisory Committee Act (Pub. L...

  2. 77 FR 62240 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-12

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... established under the Energy Employees Occupational Illness Compensation Program Act of 2000 to advise the...

  3. 46 CFR 96.40-1 - Pilot boarding equipment.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Pilot boarding equipment. 96.40-1 Section 96.40-1... CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Pilot Boarding Equipment § 96.40-1 Pilot boarding equipment. (a) This section applies to each vessel that normally embarks or disembarks a pilot from a pilot...

  4. 46 CFR 195.40-1 - Pilot boarding equipment.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Pilot boarding equipment. 195.40-1 Section 195.40-1... CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Pilot Boarding Equipment § 195.40-1 Pilot boarding equipment. (a) This section applies to each vessel that normally embarks or disembarks a pilot from a pilot...

  5. 46 CFR 96.40-1 - Pilot boarding equipment.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Pilot boarding equipment. 96.40-1 Section 96.40-1... CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Pilot Boarding Equipment § 96.40-1 Pilot boarding equipment. (a) This section applies to each vessel that normally embarks or disembarks a pilot from a pilot...

  6. 46 CFR 195.40-1 - Pilot boarding equipment.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Pilot boarding equipment. 195.40-1 Section 195.40-1... CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Pilot Boarding Equipment § 195.40-1 Pilot boarding equipment. (a) This section applies to each vessel that normally embarks or disembarks a pilot from a pilot...

  7. Directing Discipline: State Medical Board Responsiveness to State Legislatures.

    PubMed

    Lillvis, Denise F; McGrath, Robert J

    2017-02-01

    State medical boards are increasingly responsible for regulating medical and osteopathic licensure and professional conduct in the United States. Yet, there is great variation in the extent to which such boards take disciplinary action against physicians, indicating that some boards are more zealous regulators than others. We look to the political roots of such variation and seek to answer a simple, yet important, question: are nominally apolitical state medical boards responsive to political preferences? To address this question, we use panel data on disciplinary actions across sixty-four state medical boards from 1993 through 2006 and control for over-time changes in board characteristics (e.g., composition, independence, budgetary status), regulatory structure, and resources. We show that as state legislatures become more liberal [conservative], state boards increasingly [decreasingly] discipline physicians, especially during unified government and in the presence of highly professional legislatures. Our conclusions join others in emphasizing the importance of state medical boards and the contingent nature of political control of state regulation. In addition, we emphasize the roles that oversight capacity and strategy play in offsetting concerns regarding self-regulation of a powerful organized interest. Copyright © 2017 by Duke University Press.

  8. A New Standing Posture Detector to Enable People with Multiple Disabilities to Control Environmental Stimulation by Changing Their Standing Posture through a Commercial Wii Balance Board

    ERIC Educational Resources Information Center

    Shih, Ching-Hsiang; Shih, Ching-Tien; Chiang, Ming-Shan

    2010-01-01

    This study assessed whether two persons with multiple disabilities would be able to control environmental stimulation using body swing (changing standing posture) and a Wii Balance Board with a newly developed standing posture detection program (i.e. a new software program turns a Wii Balance Board into a precise standing posture detector). The…

  9. Resistance of insecticide-treated foam board insulation against the eastern subterranean termite and the Formosan subterranean termite (Isoptera: Rhinotermitidae).

    PubMed

    Su, Nan-Yao; Ban, Paul; Scheffrahn, Rudolf H

    2003-10-01

    Three foam board types, one untreated control, one containing 2,000 ppm disodium octaborate tetrahydrate (DOT), and one containing 1,000 ppm deltamethrin, were exposed to field populations of the eastern subterranean termite, Reticulitermes flavipes (Kollar), and the Formosan subterranean termite, Coptotermes formosanus Shiraki. There was no significant difference in termite damage between foam boards treated with 2,000 ppm DOT and the untreated control. Form boards containing 1,000 ppm deltamethrin were not damaged by R. flavipes, whereas only minor damage occurred after exposure to C. formosanus.

  10. Design and implementation of a control system for a quadrotor MAV

    NASA Astrophysics Data System (ADS)

    Bawek, Dean

    The quadrotor is a 200 g MAV with rapid-prototyped rotors that are driven by four brushless electric motors, capable of a collective thrust of around 400 g using an 11 V battery. The vehicle is compact with its largest dimension at 188 mm. Without any feedback control, the quadrotor is unstable. For flight stability, the vehicle incorporates a linear quadratic regulator to augment its dynamics for hover. The quadrotor's nonlinear dynamics are linearized about hover in order to be used in controller formulation. Feedback comes both directly from sensors and a Luenberger observer that computes the rotor velocities. A Simulink simulation uses hardware and software properties to serve as an environment for controller gain tuning prior to flight testing. The results from the simulation generate stabilizing control gains for the on-board attitude controller and for an off-board PC autopilot that uses the Vicon computer vision system for position feedback. Through the combined effort of the on-board and off-board controllers, the quadrotor successfully demonstrates stable hover in both nominal and disturbed conditions.

  11. Portable control device for networked mobile robots

    DOEpatents

    Feddema, John T.; Byrne, Raymond H.; Bryan, Jon R.; Harrington, John J.; Gladwell, T. Scott

    2002-01-01

    A handheld control device provides a way for controlling one or multiple mobile robotic vehicles by incorporating a handheld computer with a radio board. The device and software use a personal data organizer as the handheld computer with an additional microprocessor and communication device on a radio board for use in controlling one robot or multiple networked robots.

  12. 75 FR 25870 - Board of Scientific Counselors (BSC), National Center for Environmental Health/Agency for Toxic...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-10

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of... Control and Prevention, 4770 Buford Highway, Chamblee, Georgia 30341. Status: Open to the public, limited..., experiments, demonstrations, and studies relating to the causes, diagnosis, treatment, control, and prevention...

  13. 76 FR 24031 - Board of Scientific Counselors, National Center for Environmental Health/Agency for Toxic...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-29

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of.... L. 92-463), the Centers for Disease Control and Prevention (CDC), announces the following meeting of..., investigations, experiments, demonstrations, and studies relating to the causes, diagnosis, treatment, control...

  14. 40 CFR 52.800 - Original identification of plan section.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... were submitted on the dates specified. (1) The State Air Pollution Control Board submitted a SO2 control strategy for the City of Indianapolis on March 16, 1972. (2) The Governor submitted Pub. L. 100...) The State Air Pollution Control Board submitted additional information on surveillance methodology...

  15. 40 CFR 52.800 - Original identification of plan section.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... were submitted on the dates specified. (1) The State Air Pollution Control Board submitted a SO2 control strategy for the City of Indianapolis on March 16, 1972. (2) The Governor submitted Pub. L. 100...) The State Air Pollution Control Board submitted additional information on surveillance methodology...

  16. 40 CFR 52.800 - Original identification of plan section.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... were submitted on the dates specified. (1) The State Air Pollution Control Board submitted a SO2 control strategy for the City of Indianapolis on March 16, 1972. (2) The Governor submitted Pub. L. 100...) The State Air Pollution Control Board submitted additional information on surveillance methodology...

  17. 40 CFR 52.800 - Original identification of plan section.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... were submitted on the dates specified. (1) The State Air Pollution Control Board submitted a SO2 control strategy for the City of Indianapolis on March 16, 1972. (2) The Governor submitted Pub. L. 100...) The State Air Pollution Control Board submitted additional information on surveillance methodology...

  18. A theoretical and experimental study of wood planer noise and its control

    NASA Technical Reports Server (NTRS)

    Stewart, J. S.

    1972-01-01

    A combined analytical and experimental study of wood planer noise is made and the results applied to the development of practical noise control techniques. The dominant mechanisms of sound generation are identified and an analysis is presented which accurately predicts the governing levels of noise emission. Planing operations in which the length of the board is much greater than the width are considered. The dominant source of planer noise is identified as the board being surfaced, which is set into vibration by the impact of cutterhead knives. This is determined from studies made both in the laboratory and in the field concerning the effect of board width on the resulting noise, which indicate a six decibel increase in noise level for each doubling of board width. The theoretical development of a model for board vibration defines the vibrational field set up in the board and serves as a guide for cutterhead redesign.

  19. Integrated Real-Time Control and Imaging System for Microbiorobotics and Nanobiostructures

    DTIC Science & Technology

    2016-01-11

    kit with a control board and ALP 4.1 basic controller suite. The digital micromirror device is the highest resolution 16:9 aspect ratio system. This...in Figure 1, consisted of the following: (1) digital micromirror device (DMD) and controller, (2) an inverted epifluorescence microscope with a flat...accompanying control board and ALP 4.1 basic controller suite. The digital micromirror device is currently the highest commercially available

  20. Adapting the Wii Fit Balance Board to Enable Active Video Game Play by Wheelchair Users: User-Centered Design and Usability Evaluation.

    PubMed

    Thirumalai, Mohanraj; Kirkland, William B; Misko, Samuel R; Padalabalanarayanan, Sangeetha; Malone, Laurie A

    2018-03-06

    Active video game (AVG) playing, also known as "exergaming," is increasingly employed to promote physical activity across all age groups. The Wii Fit Balance Board is a popular gaming controller for AVGs and is used in a variety of settings. However, the commercial off-the-shelf (OTS) design poses several limitations. It is inaccessible to wheelchair users, does not support the use of stabilization assistive devices, and requires the ability to shift the center of balance (COB) in all directions to fully engage in game play. The aim of this study was to design an adapted version of the Wii Fit Balance Board to overcome the identified limitations and to evaluate the usability of the newly designed adapted Wii Fit Balance Board in persons with mobility impairments. In a previous study, 16 participants tried the OTS version of the Wii Fit Balance Board. On the basis of observed limitations, a team of engineers developed and adapted the design of the Wii Fit Balance Board, which was then subjected to multiple iterations of user feedback and design tweaks. On design completion, we recruited a new pool of participants with mobility impairments for a larger study. During their first visit, we assessed lower-extremity function using selected mobility tasks from the International Classification of Functioning, Disability and Health. During a subsequent session, participants played 2 sets of games on both the OTS and adapted versions of the Wii Fit Balance Board. Order of controller version played first was randomized. After participants played each version, we administered the System Usability Scale (SUS) to examine the participants' perceived usability. The adapted version of the Wii Fit Balance Board resulting from the user-centered design approach met the needs of a variety of users. The adapted controller (1) allowed manual wheelchair users to engage in game play, which was previously not possible; (2) included Americans with Disabilities Act-compliant handrails as part of the controller, enabling stable and safe game play; and (3) included a sensitivity control feature, allowing users to fine-tune the controller to match the users' range of COB motion. More than half the sample could not use the OTS version of the Wii Fit Balance Board, while all participants were able to use the adapted version. All participants rated the adapted Wii Fit Balance Board at a minimum as "good," while those who could not use the OTS Wii Fit Balance Board rated the adapted Wii Fit Balance Board as "excellent." We found a significant negative correlation between lower-extremity function and differences between OTS and adapted SUS scores, indicating that as lower-extremity function decreased, participants perceived the adapted Wii Fit Balance Board as more usable. This study demonstrated a successful adaptation of a widely used AVG controller. The adapted controller's potential to increase physical activity levels among people with mobility impairments will be evaluated in a subsequent trial. ClinicalTrials.gov NCT02994199; https://clinicaltrials.gov/ct2/show/NCT02994199 (Archived by WebCite at http://www.webcitation.org/6xWTyiJWf). ©Mohanraj Thirumalai, William B Kirkland, Samuel R Misko, Sangeetha Padalabalanarayanan, Laurie A Malone. Originally published in JMIR Rehabilitation and Assistive Technology (http://rehab.jmir.org), 06.03.2018.

  1. Circuit-lead trimming template

    NASA Technical Reports Server (NTRS)

    Ofarrell, K.; Winn, E.

    1979-01-01

    Template for use in trimming leads on production wiring boards is low-cost means for eliminating rejections for short leads and improving lead-strength uniformity. Template is simply unclad piece of printed-circuit board material that is drilled using same drill control tape used in making original production board. Revisions in component layout of board can therefore be made simultaneously in template.

  2. 12 CFR Appendix C to Part 1720 - Policy Guidance; Safety and Soundness Standards for Information

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Information Security Program 1. Involve the Board of Directors. 2. Assess Risk. 3. Manage and Control Risk. 4. Oversee Service Provider Arrangements. 5. Adjust the Program. 6. Report to the Board. 7. Implementation. A...—Development and Implementation of Information Security Program 1. Involve the Board of Directors. The board of...

  3. Effects of restoration burns on macroinvertebrates in southern Appalachian pine-oak forests

    Treesearch

    Jason P. Love; James M. Vose; Katherine J. Elliott

    2007-01-01

    Cover board arrays were used to measure the relative abundance of macroinvertebrates and terrestrial salamanders on prescribed burn and control sites in xeric southern Appalachians of northern Georgia and southeastern Tennessee pine-oak forests. Three microsite variables were measured at each cover board: cover board moisture level, temperature under the cover board,...

  4. Corning Community College By-Laws of the Board of Trustees.

    ERIC Educational Resources Information Center

    Corning Community Coll., NY.

    This publication gives the complete by-laws (including amendments) of the Corning Community College as they deal with (1) administrative control and powers and duties of the board of trustees, (2) terms of office and duties of officers and committees of the board, (3) time, place, frequency, and procedures of meetings of the board, (4) functions…

  5. Packaging Of Control Circuits In A Robot Arm

    NASA Technical Reports Server (NTRS)

    Kast, William

    1994-01-01

    Packaging system houses and connects control circuitry mounted on circuit boards within shoulder, upper section, and lower section of seven-degree-of-freedom robot arm. Has modular design that incorporates surface-mount technology, multilayer circuit boards, large-scale integrated circuits, and multi-layer flat cables between sections for compactness. Three sections of robot arm contain circuit modules in form of stardardized circuit boards. Each module contains two printed-circuit cards, one of each face.

  6. Enabling people with developmental disabilities to actively follow simple instructions and perform designated physical activities according to simple instructions with Nintendo Wii Balance Boards by controlling environmental stimulation.

    PubMed

    Shih, Ching-Hsiang; Chung, Chiao-Chen; Shih, Ching-Tien; Chen, Ling-Che

    2011-01-01

    The latest researches have adopted software technology turning the Nintendo Wii Balance Board into a high performance standing location detector. This study extended Wii Balance Board functionality to assess whether two people with developmental disabilities would be able to actively perform designated physical activities according to simple instructions by controlling their favorite environmental stimulation using Nintendo Wii Balance Boards. This study was carried out according to an A-B-A-B design. Data showed that both participants significantly increased their target response (performing a designated physical activity) by activating the control system to produce their preferred environmental stimulation during the intervention phases. Copyright © 2011 Elsevier Ltd. All rights reserved.

  7. An embedded vision system for an unmanned four-rotor helicopter

    NASA Astrophysics Data System (ADS)

    Lillywhite, Kirt; Lee, Dah-Jye; Tippetts, Beau; Fowers, Spencer; Dennis, Aaron; Nelson, Brent; Archibald, James

    2006-10-01

    In this paper an embedded vision system and control module is introduced that is capable of controlling an unmanned four-rotor helicopter and processing live video for various law enforcement, security, military, and civilian applications. The vision system is implemented on a newly designed compact FPGA board (Helios). The Helios board contains a Xilinx Virtex-4 FPGA chip and memory making it capable of implementing real time vision algorithms. A Smooth Automated Intelligent Leveling daughter board (SAIL), attached to the Helios board, collects attitude and heading information to be processed in order to control the unmanned helicopter. The SAIL board uses an electrolytic tilt sensor, compass, voltage level converters, and analog to digital converters to perform its operations. While level flight can be maintained, problems stemming from the characteristics of the tilt sensor limits maneuverability of the helicopter. The embedded vision system has proven to give very good results in its performance of a number of real-time robotic vision algorithms.

  8. 75 FR 1062 - Board of Scientific Counselors, National Center for Injury Prevention and Control, (BSC, NCIPC)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-08

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, National Center for Injury Prevention and Control, (BSC, NCIPC) In accordance with Section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control and Prevention (CDC) announces, the followin...

  9. 78 FR 32657 - Board of Scientific Counselors, National Center for Environmental Health/Agency for Toxic...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-31

    ..., diagnosis, treatment, control, and prevention of physical and mental diseases and other impairments; (2... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention (CDC) Board of.... L. 92-463), the Centers for Disease Control and Prevention (CDC), announces the following meeting of...

  10. 75 FR 60762 - Board of Scientific Counselors (BSC), National Center for Environmental Health/Agency for Toxic...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-01

    ... studies relating to the causes, diagnosis, treatment, control, and prevention of physical and mental... DEPARTMENT OF HEALTH AND HUMAN SERVICES (HHS) Centers for Disease Control and Prevention Board of... Climate Control; a discussion of ATSDR Funded State Reports; an update on Amyotrophic Lateral Sclerosis...

  11. Policies, Local Control, and Other Antiquities.

    ERIC Educational Resources Information Center

    Davies, Daniel R.; And Others

    1988-01-01

    This bulletin focuses on the views of four authors. The first, Daniel R. Davies, describes the rise and fall of local control and local school board policies and predicts how the vacuum will be filled. Specifically, he analyzes the concomitant waning of local control and school board policymaking power and forecasts stages in the transition from…

  12. 75 FR 9196 - Letter From Secretary of Energy Accepting Defense Nuclear Facilities Safety Board (Board...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-01

    ... capability for non- vital laboratory room electrical loads that provides an engineered control to reduce..., approximately two orders of magnitude higher than our evaluation guideline for selecting safety class controls. Approval of the DSA included recognition of weaknesses in the facility's control set and the need to...

  13. 77 FR 54655 - Genesee & Wyoming Inc.-Control-RailAmerica, Inc., et al.

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-05

    ... & Wyoming Inc.--Control--RailAmerica, Inc., et al. AGENCY: Surface Transportation Board. ACTION: Decision No... August 6, 2012, by Genesee and Wyoming Inc. (GWI) and RailAmerica, Inc. (RailAmerica). The application seeks Board approval under 49 U.S.C. 11323-11325 of the acquisition of control of RailAmerica, a...

  14. Our Cost Control Program Is Real, and Good PR Too.

    ERIC Educational Resources Information Center

    Harris, James; And Others

    The cost control program of the Beaverton School District (Oregon) is presented in three sections. Reviewing the role of the school board in cost control development, Jean Holt (a board member) outlines the fiscal management system, long-range financial strategies, energy conservation, and utilization of facilities. The programs have resulted in a…

  15. [Balance trainability using the Nintendo Wii balance board in sportive people].

    PubMed

    Paukowits, S; Stöggl, T

    2014-03-01

    A multivariable training has a positive impact on balance skills and risk of injury. To date the effect of this training using the Nintendo Wii balance board in sportive people has not yet been investigated. The aim of this study was to investigate whether training with the Nintendo Wii balance board can improve balance skills. 20 people were randomized into a control and an intervention group each with 10 people who performed a unilateral stance test with eyes open and closed as well as the star excursion balance test before and after the intervention. The control group completed their usual sports and the intervention group an adjunct training with the Nintendo Wii balance board for 4 weeks. Adjunct Training using the Nintendo Wii Balance Board did not improve sportive people's balance skills significantly. The intervention group, however, attained better results in the star excursion balance test, whereas the control group did not show any changes. The unilateral stance tests did not provide significant differences before and after training within both groups. The use of the Nintendo Wii balance board should be further investigated by employing individual difficulty levels. © Georg Thieme Verlag KG Stuttgart · New York.

  16. 21 CFR 880.6080 - Cardiopulmonary resuscitation board.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Cardiopulmonary resuscitation board. 880.6080... Miscellaneous Devices § 880.6080 Cardiopulmonary resuscitation board. (a) Identification. A cardiopulmonary... during cardiopulmonary resuscitation. (b) Classification. Class I (general controls). The device is...

  17. 21 CFR 880.6080 - Cardiopulmonary resuscitation board.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Cardiopulmonary resuscitation board. 880.6080... Miscellaneous Devices § 880.6080 Cardiopulmonary resuscitation board. (a) Identification. A cardiopulmonary... during cardiopulmonary resuscitation. (b) Classification. Class I (general controls). The device is...

  18. 21 CFR 880.6080 - Cardiopulmonary resuscitation board.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Cardiopulmonary resuscitation board. 880.6080... Miscellaneous Devices § 880.6080 Cardiopulmonary resuscitation board. (a) Identification. A cardiopulmonary... during cardiopulmonary resuscitation. (b) Classification. Class I (general controls). The device is...

  19. 21 CFR 880.6080 - Cardiopulmonary resuscitation board.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Cardiopulmonary resuscitation board. 880.6080... Miscellaneous Devices § 880.6080 Cardiopulmonary resuscitation board. (a) Identification. A cardiopulmonary... during cardiopulmonary resuscitation. (b) Classification. Class I (general controls). The device is...

  20. 21 CFR 880.6080 - Cardiopulmonary resuscitation board.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Cardiopulmonary resuscitation board. 880.6080... Miscellaneous Devices § 880.6080 Cardiopulmonary resuscitation board. (a) Identification. A cardiopulmonary... during cardiopulmonary resuscitation. (b) Classification. Class I (general controls). The device is...

  1. Spacecraft drag-free technology development: On-board estimation and control synthesis

    NASA Technical Reports Server (NTRS)

    Key, R. W.; Mettler, E.; Milman, M. H.; Schaechter, D. B.

    1982-01-01

    Estimation and control methods for a Drag-Free spacecraft are discussed. The functional and analytical synthesis of on-board estimators and controllers for an integrated attitude and translation control system is represented. The framework for detail definition and design of the baseline drag-free system is created. The techniques for solution of self-gravity and electrostatic charging problems are applicable generally, as is the control system development.

  2. Localized radio frequency communication using asynchronous transfer mode protocol

    DOEpatents

    Witzke, Edward L [Edgewood, NM; Robertson, Perry J [Albuquerque, NM; Pierson, Lyndon G [Albuquerque, NM

    2007-08-14

    A localized wireless communication system for communication between a plurality of circuit boards, and between electronic components on the circuit boards. Transceivers are located on each circuit board and electronic component. The transceivers communicate with one another over spread spectrum radio frequencies. An asynchronous transfer mode protocol controls communication flow with asynchronous transfer mode switches located on the circuit boards.

  3. Smart Board in the Music Classroom

    ERIC Educational Resources Information Center

    Baker, Jean

    2007-01-01

    A Smart Board is an interactive whiteboard connected to a computer and a data projector. Images can be projected on the board, and the Smart Board can be used as a computer. A person can control the computer using his finger, and can mark directly on the screen using various colors. Best of all, users can easily import many types of information,…

  4. Vibration Pattern Imager (VPI): A control and data acquisition system for scanning laser vibrometers

    NASA Technical Reports Server (NTRS)

    Rizzi, Stephen A.; Brown, Donald E.; Shaffer, Thomas A.

    1993-01-01

    The Vibration Pattern Imager (VPI) system was designed to control and acquire data from scanning laser vibrometer sensors. The PC computer based system uses a digital signal processing (DSP) board and an analog I/O board to control the sensor and to process the data. The VPI system was originally developed for use with the Ometron VPI Sensor, but can be readily adapted to any commercially available sensor which provides an analog output signal and requires analog inputs for control of mirror positioning. The sensor itself is not part of the VPI system. A graphical interface program, which runs on a PC under the MS-DOS operating system, functions in an interactive mode and communicates with the DSP and I/O boards in a user-friendly fashion through the aid of pop-up menus. Two types of data may be acquired with the VPI system: single point or 'full field.' In the single point mode, time series data is sampled by the A/D converter on the I/O board (at a user-defined sampling rate for a selectable number of samples) and is stored by the PC. The position of the measuring point (adjusted by mirrors in the sensor) is controlled via a mouse input. The mouse input is translated to output voltages by the D/A converter on the I/O board to control the mirror servos. In the 'full field' mode, the measurement point is moved over a user-selectable rectangular area. The time series data is sampled by the A/D converter on the I/O board (at a user-defined sampling rate for a selectable number of samples) and converted to a root-mean-square (rms) value by the DSP board. The rms 'full field' velocity distribution is then uploaded for display and storage on the PC.

  5. Power converter using near-load output capacitance, direct inductor contact, and/or remote current sense

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Coteus, Paul W.; Ferencz, Andrew; Hall, Shawn A.

    An apparatus includes a first circuit board including first components including a load, and a second circuit board including second components including switching power devices and an output inductor. Ground and output voltage contacts between the circuit boards are made through soldered or connectorized interfaces. Certain components on the first circuit board and certain components, including the output inductor, on the second circuit board act as a DC-DC voltage converter for the load. An output capacitance for the conversion is on the first circuit board with no board-to-board interface between the output capacitance and the load. The inductance of themore » board-to-board interface functions as part of the output inductor's inductance and not as a parasitic inductance. Sense components for sensing current through the output inductor are located on the first circuit board. Parasitic inductance of the board-to-board interface has less effect on a sense signal provided to a controller.« less

  6. Adapting the Wii Fit Balance Board to Enable Active Video Game Play by Wheelchair Users: User-Centered Design and Usability Evaluation

    PubMed Central

    Kirkland, William B; Misko, Samuel R; Padalabalanarayanan, Sangeetha; Malone, Laurie A

    2018-01-01

    Background Active video game (AVG) playing, also known as “exergaming,” is increasingly employed to promote physical activity across all age groups. The Wii Fit Balance Board is a popular gaming controller for AVGs and is used in a variety of settings. However, the commercial off-the-shelf (OTS) design poses several limitations. It is inaccessible to wheelchair users, does not support the use of stabilization assistive devices, and requires the ability to shift the center of balance (COB) in all directions to fully engage in game play. Objective The aim of this study was to design an adapted version of the Wii Fit Balance Board to overcome the identified limitations and to evaluate the usability of the newly designed adapted Wii Fit Balance Board in persons with mobility impairments. Methods In a previous study, 16 participants tried the OTS version of the Wii Fit Balance Board. On the basis of observed limitations, a team of engineers developed and adapted the design of the Wii Fit Balance Board, which was then subjected to multiple iterations of user feedback and design tweaks. On design completion, we recruited a new pool of participants with mobility impairments for a larger study. During their first visit, we assessed lower-extremity function using selected mobility tasks from the International Classification of Functioning, Disability and Health. During a subsequent session, participants played 2 sets of games on both the OTS and adapted versions of the Wii Fit Balance Board. Order of controller version played first was randomized. After participants played each version, we administered the System Usability Scale (SUS) to examine the participants’ perceived usability. Results The adapted version of the Wii Fit Balance Board resulting from the user-centered design approach met the needs of a variety of users. The adapted controller (1) allowed manual wheelchair users to engage in game play, which was previously not possible; (2) included Americans with Disabilities Act-compliant handrails as part of the controller, enabling stable and safe game play; and (3) included a sensitivity control feature, allowing users to fine-tune the controller to match the users’ range of COB motion. More than half the sample could not use the OTS version of the Wii Fit Balance Board, while all participants were able to use the adapted version. All participants rated the adapted Wii Fit Balance Board at a minimum as “good,” while those who could not use the OTS Wii Fit Balance Board rated the adapted Wii Fit Balance Board as “excellent.” We found a significant negative correlation between lower-extremity function and differences between OTS and adapted SUS scores, indicating that as lower-extremity function decreased, participants perceived the adapted Wii Fit Balance Board as more usable. Conclusions This study demonstrated a successful adaptation of a widely used AVG controller. The adapted controller’s potential to increase physical activity levels among people with mobility impairments will be evaluated in a subsequent trial. Trial Registration ClinicalTrials.gov NCT02994199; https://clinicaltrials.gov/ct2/show/NCT02994199 (Archived by WebCite at http://www.webcitation.org/6xWTyiJWf) PMID:29510972

  7. 78 FR 71724 - Recordations, Water Carrier Tariffs, and Agricultural Contract Summaries

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-29

    ... DEPARTMENT OF TRANSPORTATION Surface Transportation Board Recordations, Water Carrier Tariffs, and Agricultural Contract Summaries AGENCY: Surface Transportation Board, DOT. ACTION: Notice of OMB Approval of..., Control Number 2140-0025 (2) Water Carrier Tariffs, Control Number 2140-26 (3) Agricultural Contract...

  8. 12 CFR 917.6 - Internal control system.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 12 Banks and Banking 8 2012-01-01 2012-01-01 false Internal control system. 917.6 Section 917.6 Banks and Banking FEDERAL HOUSING FINANCE BOARD GOVERNANCE AND MANAGEMENT OF THE FEDERAL HOME LOAN BANKS POWERS AND RESPONSIBILITIES OF BANK BOARDS OF DIRECTORS AND SENIOR MANAGEMENT § 917.6 Internal control system. (a) Establishment and maintenance. ...

  9. 12 CFR 917.6 - Internal control system.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 8 2013-01-01 2013-01-01 false Internal control system. 917.6 Section 917.6 Banks and Banking FEDERAL HOUSING FINANCE BOARD GOVERNANCE AND MANAGEMENT OF THE FEDERAL HOME LOAN BANKS POWERS AND RESPONSIBILITIES OF BANK BOARDS OF DIRECTORS AND SENIOR MANAGEMENT § 917.6 Internal control system. (a) Establishment and maintenance. ...

  10. 12 CFR 917.6 - Internal control system.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 8 2014-01-01 2014-01-01 false Internal control system. 917.6 Section 917.6 Banks and Banking FEDERAL HOUSING FINANCE BOARD GOVERNANCE AND MANAGEMENT OF THE FEDERAL HOME LOAN BANKS POWERS AND RESPONSIBILITIES OF BANK BOARDS OF DIRECTORS AND SENIOR MANAGEMENT § 917.6 Internal control system. (a) Establishment and maintenance. ...

  11. 78 FR 29754 - Board of Scientific Counselors, National Center for Injury Prevention and Control, (BSC, NCIPC)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-21

    ... mild-Traumatic Injury Workgroup. There will be 15 minutes allotted for public comments at the end of... Scientific Counselors, National Center for Injury Prevention and Control, (BSC, NCIPC) In accordance with...-being; and (3) conduct and assist in research and control activities related to injury. The Board of...

  12. 49 CFR 1182.4 - Board review of the application.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 8 2010-10-01 2010-10-01 false Board review of the application. 1182.4 Section 1182.4 Transportation Other Regulations Relating to Transportation (Continued) SURFACE TRANSPORTATION BOARD, DEPARTMENT OF TRANSPORTATION RULES OF PRACTICE PURCHASE, MERGER, AND CONTROL OF MOTOR PASSENGER...

  13. Deciding the Fate of Local Control.

    ERIC Educational Resources Information Center

    Schlechty, Phillip C.

    1992-01-01

    The fundamental job of school board members is to view themselves as moral and cultural leaders and to transform the needs of groups to a higher and more noble framework. Lists the National School Boards Association's statement on the governance role of the local school board. (MLF)

  14. 12 CFR 917.6 - Internal control system.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Banks and Banking FEDERAL HOUSING FINANCE BOARD GOVERNANCE AND MANAGEMENT OF THE FEDERAL HOME LOAN BANKS POWERS AND RESPONSIBILITIES OF BANK BOARDS OF DIRECTORS AND SENIOR MANAGEMENT § 917.6 Internal control system. (a) Establishment and maintenance. (1) Each Bank shall establish and maintain an effective...

  15. 12 CFR 917.6 - Internal control system.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Banks and Banking FEDERAL HOUSING FINANCE BOARD GOVERNANCE AND MANAGEMENT OF THE FEDERAL HOME LOAN BANKS..., including specifying the nature and frequency of reports it receives. (c) Internal control responsibilities... the major business strategies and policies established by the Bank's board of directors into operating...

  16. 47 CFR 2.925 - Identification of equipment.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... sections assembled in a common enclosure, on a common chassis or circuit board, and with common frequency controlling circuits. Devices to which a single FCC Identifier has been assigned shall be identified pursuant... circuit boards with independent frequency controlling circuits. The FCC Identifier assigned to any...

  17. 47 CFR 2.925 - Identification of equipment.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... common chassis or circuit board, and with common frequency controlling circuits. Devices to which a... common enclosure, but constructed on separate sub-units or circuit boards with independent frequency controlling circuits. The FCC Identifier assigned to any transmitter section shall be preceded by the term TX...

  18. 47 CFR 2.925 - Identification of equipment.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... common chassis or circuit board, and with common frequency controlling circuits. Devices to which a... common enclosure, but constructed on separate sub-units or circuit boards with independent frequency controlling circuits. The FCC Identifier assigned to any transmitter section shall be preceded by the term TX...

  19. 47 CFR 2.925 - Identification of equipment.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... common chassis or circuit board, and with common frequency controlling circuits. Devices to which a... common enclosure, but constructed on separate sub-units or circuit boards with independent frequency controlling circuits. The FCC Identifier assigned to any transmitter section shall be preceded by the term TX...

  20. 47 CFR 2.925 - Identification of equipment.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... common chassis or circuit board, and with common frequency controlling circuits. Devices to which a... common enclosure, but constructed on separate sub-units or circuit boards with independent frequency controlling circuits. The FCC Identifier assigned to any transmitter section shall be preceded by the term TX...

  1. Assisting people with multiple disabilities actively correct abnormal standing posture with a Nintendo Wii balance board through controlling environmental stimulation.

    PubMed

    Shih, Ching-Hsiang; Shih, Ching-Tien; Chu, Chiung-Ling

    2010-01-01

    The latest researches adopted software technology turning the Nintendo Wii Balance Board into a high performance change of standing posture (CSP) detector, and assessed whether two persons with multiple disabilities would be able to control environmental stimulation using body swing (changing standing posture). This study extends Wii Balance Board functionality for standing posture correction (i.e., actively adjust abnormal standing posture) to assessed whether two persons with multiple disabilities would be able to actively correct their standing posture by controlling their favorite stimulation on/off using a Wii Balance Board with a newly developed standing posture correcting program (SPCP). The study was performed according to an ABAB design, in which A represented baseline and B represented intervention phases. Data showed that both participants significantly increased time duration of maintaining correct standing posture (TDMCSP) to activate the control system to produce environmental stimulation during the intervention phases. Practical and developmental implications of the findings were discussed.

  2. Feedback control system based on a remote operated PID controller implemented using mbed NXP LPC1768 development board

    NASA Astrophysics Data System (ADS)

    Pricop, Emil; Zamfir, Florin; Paraschiv, Nicolae

    2015-11-01

    Process control is a challenging research topic for both academia and industry for a long time. Controllers evolved from the classical SISO approach to modern fuzzy or neuro-fuzzy embedded devices with networking capabilities, however PID algorithms are still used in the most industrial control loops. In this paper, we focus on the implementation of a PID controller using mbed NXP LPC1768 development board. This board integrates a powerful ARM Cortex- M3 core and has networking capabilities. The implemented controller can be remotely operated by using an Internet connection and a standard Web browser. The main advantages of the proposed embedded system are customizability, easy operation and very low power consumption. The experimental results obtained by using a simulated process are analysed and shows that the implementation can be done with success in industrial applications.

  3. 76 FR 70827 - Proposed Information Collection (Board of Veterans' Appeals Customer Satisfaction With Hearing...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-15

    ... DEPARTMENT OF VETERANS AFFAIRS [OMB Control No. 2900-0548] Proposed Information Collection (Board of Veterans' Appeals Customer Satisfaction With Hearing Survey Card) Activity; Comment Request AGENCY... information technology. Title: Board of Veterans' Appeals Customer Satisfaction with Hearing Survey Card, VA...

  4. Electronic inverter assembly

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Singh, Brij N.; Schmit, Christopher J.

    A first driver portion comprises a set of first components mounted on or associated with a first circuit board. A second circuit board is spaced apart from the first circuit board. A second driver portion comprises a set of second components mounted on or associated with the second circuit board, where the first driver portion and the second driver portion collectively are adapted to provide input signals to the control terminal of each semiconductor switch of an inverter. A first edge connector is mounted on the first circuit board. A second edge connector is mounted on the second circuit board.more » An interface board has mating edges that mate with the first edge connector and the second edge connector.« less

  5. 12 CFR 308.172 - Eligibility of applicants.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... for remuneration for the applicant, under its direction and control, on the date the adversary... indirectly owns or controls a majority of the voting shares. The Board of Directors may, however, on the... addition, the Board of Directors may determine that financial relationships of the applicant other than...

  6. 32 CFR 631.8 - Participation by civil agencies.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... ENFORCEMENT AND CRIMINAL INVESTIGATIONS ARMED FORCES DISCIPLINARY CONTROL BOARDS AND OFF-INSTALLATION LIAISON AND OPERATIONS Armed Forces Disciplinary Control Boards § 631.8 Participation by civil agencies. (a... 32 National Defense 4 2010-07-01 2010-07-01 true Participation by civil agencies. 631.8 Section...

  7. 32 CFR 631.8 - Participation by civil agencies.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... ENFORCEMENT AND CRIMINAL INVESTIGATIONS ARMED FORCES DISCIPLINARY CONTROL BOARDS AND OFF-INSTALLATION LIAISON AND OPERATIONS Armed Forces Disciplinary Control Boards § 631.8 Participation by civil agencies. (a... 32 National Defense 4 2011-07-01 2011-07-01 false Participation by civil agencies. 631.8 Section...

  8. New Cancer Prevention and Control Central Institutional Review Board Established | Division of Cancer Prevention

    Cancer.gov

    The NCI Central Institutional Review Board (CIRB) Initiative announced the establishment of the Cancer Prevention and Control (CPC) CIRB January 14, extending the benefits of centralized review to investigators participating in clinical trials sponsored by the Division of Cancer Prevention (DCP). |

  9. Fluid Power Multi-actuator Circuit Board with Microcomputer Control Option.

    ERIC Educational Resources Information Center

    McKechnie, R. E.; Vickers, G. W.

    1981-01-01

    Describes a portable fluid power engineering laboratory and class demonstration apparatus designed to enable students to design, build, and test multi-actuator circuits. Features a variety of standard pneumatic values and actuators fitted with quick disconnect couplings. Discusses sequencing circuit boards, microcomputer control, cost, and…

  10. 40 CFR 52.1384 - Emission control regulations.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 4 2012-07-01 2012-07-01 false Emission control regulations. 52.1384 Section 52.1384 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS... Quality and Exxon Company, USA, adopted by Board Order issued on June 12, 1998, by the Montana Board of...

  11. 40 CFR 52.1384 - Emission control regulations.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 4 2011-07-01 2011-07-01 false Emission control regulations. 52.1384 Section 52.1384 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS... Quality and Exxon Company, USA, adopted by Board Order issued on June 12, 1998, by the Montana Board of...

  12. 40 CFR 52.1384 - Emission control regulations.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 4 2013-07-01 2013-07-01 false Emission control regulations. 52.1384 Section 52.1384 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS... Quality and Exxon Company, USA, adopted by Board Order issued on June 12, 1998, by the Montana Board of...

  13. 40 CFR 52.1384 - Emission control regulations.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 4 2014-07-01 2014-07-01 false Emission control regulations. 52.1384 Section 52.1384 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS... Quality and Exxon Company, USA, adopted by Board Order issued on June 12, 1998, by the Montana Board of...

  14. 40 CFR 62.7856 - Albuquerque/Bernalillo County Air Quality Control Board.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 9 2012-07-01 2012-07-01 false Albuquerque/Bernalillo County Air... Albuquerque/Bernalillo County Air Quality Control Board. (a) Identification of Plan. Albuquerque-Bernalillo County Municipal Solid Waste Landfill Designated Pollutant Plan, as adopted by the Albuquerque/Bernalillo...

  15. 40 CFR 62.7856 - Albuquerque/Bernalillo County Air Quality Control Board.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 9 2014-07-01 2014-07-01 false Albuquerque/Bernalillo County Air... Albuquerque/Bernalillo County Air Quality Control Board. (a) Identification of Plan. Albuquerque-Bernalillo County Municipal Solid Waste Landfill Designated Pollutant Plan, as adopted by the Albuquerque/Bernalillo...

  16. 40 CFR 62.7856 - Albuquerque/Bernalillo County Air Quality Control Board.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 9 2013-07-01 2013-07-01 false Albuquerque/Bernalillo County Air... Albuquerque/Bernalillo County Air Quality Control Board. (a) Identification of Plan. Albuquerque-Bernalillo County Municipal Solid Waste Landfill Designated Pollutant Plan, as adopted by the Albuquerque/Bernalillo...

  17. Development of Labview based data acquisition and multichannel analyzer software for radioactive particle tracking system

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rahman, Nur Aira Abd, E-mail: nur-aira@nuclearmalaysia.gov.my; Yussup, Nolida; Ibrahim, Maslina Bt. Mohd

    2015-04-29

    A DAQ (data acquisition) software called RPTv2.0 has been developed for Radioactive Particle Tracking System in Malaysian Nuclear Agency. RPTv2.0 that features scanning control GUI, data acquisition from 12-channel counter via RS-232 interface, and multichannel analyzer (MCA). This software is fully developed on National Instruments Labview 8.6 platform. Ludlum Model 4612 Counter is used to count the signals from the scintillation detectors while a host computer is used to send control parameters, acquire and display data, and compute results. Each detector channel consists of independent high voltage control, threshold or sensitivity value and window settings. The counter is configured withmore » a host board and twelve slave boards. The host board collects the counts from each slave board and communicates with the computer via RS-232 data interface.« less

  18. Development, application, and validation of a survey for infectious disease control practices at equine boarding facilities.

    PubMed

    Kirby, Alanna T; Traub-Dargatz, Josie L; Hill, Ashley E; Kogan, Lori R; Morley, Paul S; Heird, James C

    2010-11-15

    To develop a questionnaire for self-assessment of biosecurity practices at equine boarding facilities and to evaluate infectious disease control practices in these facilities in Colorado. Cross-sectional study. 64 equine boarding facilities in Colorado. Survey questions were rated according to importance for prevention and containment of equine infectious diseases. Point values (range, 0 to 20) were assigned for possible responses, with greater values given for optimal infection control methods. Questionnaires were mailed to equine boarding facilities in Colorado advertised on the World Wide Web. Survey responses were compared with assessments made by a member of the research team during visits to 30 randomly selected facilities. Agreement among results was analyzed via a kappa test and rated as poor, fair, moderate, substantial, or nearly perfect. Survey responses were received for 64 of 163 (39%) equine boarding facilities. Scores ranged from 106 to 402 points (maximum possible score, 418). Most facilities received better scores for movement and housing of equids than for other sections of the survey. Respondents at 24 of 48 (50%) facilities that routinely received new equids reported isolation of new arrivals. Agreement between self-assessment by survey respondents and evaluation by a member of the research team was determined to be fair to substantial. Most equine boarding facilities have opportunities to improve measures for prevention or containment of contagious diseases (eg, isolation of newly arrived equids and use of written health management protocols). Most self-assessments of infection control practices were accurate.

  19. Illinois School Law Survey. Third Edition.

    ERIC Educational Resources Information Center

    Braun, Brian A.

    School-related statutes and applicable court decisions in Illinois are presented in a question/answer format followed by legal citations. The following topics are discussed in 27 chapters: (1) Control of Illinois Public Schools; (2) School Boards; (3) School Board Membership; (4) School Election Procedures; (5) School Board Officers; (6) School…

  20. 75 FR 59263 - Agency Information Collection Activities: Announcement of Board Approval Under Delegated...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-27

    ... FEDERAL RESERVE SYSTEM Agency Information Collection Activities: Announcement of Board Approval... Reserve System (Board) under OMB delegated authority, as per 5 CFR 1320.16 (OMB Regulations on Controlling... placed into OMB's public docket files. The Federal Reserve may not conduct or sponsor, and the respondent...

  1. 77 FR 14377 - Subcommittee for Dose Reconstruction Reviews (SDRR), Advisory Board on Radiation and Worker...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-09

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Subcommittee for Dose Reconstruction Reviews (SDRR), Advisory Board on Radiation and Worker Health (ABRWH or the Advisory Board), National Institute for Occupational Safety and Health (NIOSH) In accordance with section...

  2. 48 CFR 1903.670 - Contracts between the Broadcasting Board of Governors and former employees.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... System BROADCASTING BOARD OF GOVERNORS GENERAL IMPROPER BUSINESS PRACTICES AND PERSONAL CONFLICTS OF... Contracts between the Broadcasting Board of Governors and former employees. To avoid conflicts of interest... employees or their family members are known to have controlling interest, may be entered into within two...

  3. Space flight printed wiring board measling investigation

    NASA Technical Reports Server (NTRS)

    Thomas, Walter B., III

    1994-01-01

    A flight printed wiring board (PWB) for a satellite project was observed to have a high incidence of measling. Other PWB's produced for the program by the same manufacturer did not exhibit the degree of measling as did the 'measle-prone' board. Measling susceptibility during hand soldering and measling effects on PWB insulation resistance were investigated for three production PWB's. Measling resistance was significantly different between the three boards: the 'worst' exhibited five times the number of measles as the 'best' board. 'Severe' measling (that which is likely to affect board reliability) did not exist on the 'best' board, even under extreme soldering conditions (399 degrees C for 12-15 sec.), whereas the 'worst' board showed an average of one 'severe' measle for every two pads under more normal soldering conditions (288-343 degrees C for 2-5 sec.). Both soldering time and temperature affected measling, with time having a slightly greater influence (2 percent versus 12 percent). Measling effects on PWB insulation resistance were inconclusive. These were evaluated by in situ resistance measurements on the same three boards at elevated temperature and humidity. The measured resistance for all three boards decreased for exposures greater than 50 degrees C and 50 percent relative humidity. The 'measle-prone' board showed a resistance decrease at only 25 degrees C and 50 percent relative humidity. However, no definitive difference was detected between measled and not-measled (control) samples. The boards evaluated were production boards, so the effect of interlayer traces connecting the plated-through holes was not controlled. It is likely the resistance measurements were over different volumes of PWB laminate, which would account for the widely varying resistances measured. Thermomechanical measurements on board laminate materials did not reveal any differences attributed to measling. Differences in glass transition temperature were significantly different when measured by DTA, but not by SDT. Laminate thermal expansion differences were significant for the 35 degrees C evaluations, but not for any higher temperatures.

  4. Space flight printed wiring board measling investigation

    NASA Astrophysics Data System (ADS)

    Thomas, Walter B., III

    1994-05-01

    A flight printed wiring board (PWB) for a satellite project was observed to have a high incidence of measling. Other PWB's produced for the program by the same manufacturer did not exhibit the degree of measling as did the 'measle-prone' board. Measling susceptibility during hand soldering and measling effects on PWB insulation resistance were investigated for three production PWB's. Measling resistance was significantly different between the three boards: the 'worst' exhibited five times the number of measles as the 'best' board. 'Severe' measling (that which is likely to affect board reliability) did not exist on the 'best' board, even under extreme soldering conditions (399 degrees C for 12-15 sec.), whereas the 'worst' board showed an average of one 'severe' measle for every two pads under more normal soldering conditions (288-343 degrees C for 2-5 sec.). Both soldering time and temperature affected measling, with time having a slightly greater influence (2 percent versus 12 percent). Measling effects on PWB insulation resistance were inconclusive. These were evaluated by in situ resistance measurements on the same three boards at elevated temperature and humidity. The measured resistance for all three boards decreased for exposures greater than 50 degrees C and 50 percent relative humidity. The 'measle-prone' board showed a resistance decrease at only 25 degrees C and 50 percent relative humidity. However, no definitive difference was detected between measled and not-measled (control) samples. The boards evaluated were production boards, so the effect of interlayer traces connecting the plated-through holes was not controlled. It is likely the resistance measurements were over different volumes of PWB laminate, which would account for the widely varying resistances measured. Thermomechanical measurements on board laminate materials did not reveal any differences attributed to measling. Differences in glass transition temperature were significantly different when measured by DTA, but not by SDT. Laminate thermal expansion differences were significant for the 35 degrees C evaluations, but not for any higher temperatures.

  5. 77 FR 37410 - Board of Scientific Counselors, Office of Public Health Preparedness and Response; Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-21

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Public Health Preparedness and Response; Meeting In accordance with section..., Centers for Disease Control and Prevention (CDC), and the Director, Office of Public Health Preparedness...

  6. 76 FR 53474 - Board of Scientific Counselors, Office of Public Health Preparedness and Response (BSC, OPHPR)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-26

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Public Health Preparedness and Response (BSC, OPHPR) In accordance with... Control and Prevention (CDC), and the Director, Office of Public Health Preparedness and Response (OPHPR...

  7. 75 FR 22607 - Board of Scientific Counselors, Coordinating Center for Infectious Diseases (CCID)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-29

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Coordinating Center for Infectious Diseases (CCID) In accordance with section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control and...

  8. 78 FR 13678 - Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-28

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID) Notice of Cancellation: A notice was... management activities, for both the Centers for Disease Control and Prevention and the Agency for Toxic...

  9. 40 CFR 1060.810 - What materials does this part reference?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) AIR POLLUTION CONTROLS CONTROL OF EVAPORATIVE EMISSIONS FROM NEW AND IN-USE NONROAD AND STATIONARY... Speciation, December 2003 1060.801 (c) California Air Resources Board material. Table 3 to this section lists material from the California Air Resources Board that we have incorporated by reference. The first column...

  10. 40 CFR 1060.810 - What materials does this part reference?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...) AIR POLLUTION CONTROLS CONTROL OF EVAPORATIVE EMISSIONS FROM NEW AND IN-USE NONROAD AND STATIONARY... Speciation, December 2003 1060.801 (c) California Air Resources Board material. Table 3 to this section lists material from the California Air Resources Board that we have incorporated by reference. The first column...

  11. 40 CFR 1060.810 - What materials does this part reference?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...) AIR POLLUTION CONTROLS CONTROL OF EVAPORATIVE EMISSIONS FROM NEW AND IN-USE NONROAD AND STATIONARY... Speciation, December 2003 1060.801 (c) California Air Resources Board material. Table 3 to this section lists material from the California Air Resources Board that we have incorporated by reference. The first column...

  12. 77 FR 22326 - Board of Scientific Counselors, National Center for Health Statistics, (BSC, NCHS)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-13

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of...) of the Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control and..., and organizational affiliation of the presenter. Written comments should not exceed five single-spaced...

  13. 75 FR 18214 - Board of Scientific Counselors, Coordinating Office for Terrorism Preparedness and Emergency...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-09

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of...), the Assistant Secretary for Health (ASH), the Director, Centers for Disease Control and Prevention... than 12 noon (EDT) on Monday, April 19, 2010: Full Name, Organizational Affiliation, Complete Mailing...

  14. 75 FR 17754 - Board of Scientific Counselors, National Center for Health Statistics, (BSC, NCHS)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-07

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of...) of the Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control and... name, address, telephone number, and organizational affiliation of the presenter. Written comments...

  15. School Boards as Policy-Makers.

    ERIC Educational Resources Information Center

    Coleman, Peter

    Decision-making in general and policy decisions in particular are the prime responsibility of school boards because policies are control mechanisms by which trustees assert local control. Policy decisions differ from others in their concern with values and purposes and the legitimization of the organization to society at large. Additionally, they…

  16. 76 FR 52735 - Agency Information Collection Activities: Proposed Information Collection; Comment Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-23

    ... the Board of Governors of the Federal Reserve System (Board) to promulgate regulations governing capital distributions. OTS Control No. 1550-0059 was, therefore, transferred to the FRB under OMB Control... to the FRB. Comments are solicited on: a. Whether the proposed collection of information is necessary...

  17. BrainPort(Registered trademark) Technology Tongue Interface Characterization

    DTIC Science & Technology

    2010-03-01

    22 boards in house. … … … … … Experiment Control Workstation HDA with 2000 to 20,000 electrodes ●●● TCP/IP 10/100 Linux-based Control...Defense Advanced Research Projects Agency HD High Density HDA High Density Array IOD Intra-Oral Device IRB Institutional Review Board Electrode

  18. 76 FR 13271 - Gulf & Ohio Railways, Inc., H. Peter Claussen and Linda C. Claussen-Continuance in Control...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-10

    ... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. FD 35414] Gulf & Ohio Railways, Inc., H. Peter Claussen and Linda C. Claussen--Continuance in Control Exemption--Lancaster & Chester Railroad, LLC AGENCY: Surface Transportation Board, DOT. ACTION: Correction to notice of exemption...

  19. New insights in the treatment by levofloxacin.

    PubMed

    File, Thomas M

    2004-01-01

    Levofloxacin is widely regarded as one of the most important fluoroquinolones available today. It possesses excellent activity against a wide range of important pathogens, including those resistant to many other antimicrobials. While rates of resistance to other previously useful antimicrobial classes has grown, levofloxacin has maintained its efficacy, with generally very low rates of resistance around the world. It is indicated for a wide range of infections including community-acquired respiratory infections in adults, particularly community-acquired pneumonia (CAP), acute bacterial exacerbations of chronic bronchitis (AECB), and acute sinusitis. In addition, it is recommended for infections of skin and soft tissue, and the urinary tract. With postmarketing surveillance data available for the last decade, levofloxacin possesses an unparalleled database to demonstrate its clinical efficacy and safety. Remarkably, levofloxacin continues to expand its list of indications. The development of a new high-dose 750-mg schedule has the potential to decrease the duration of treatment as well as reduce the emergence of resistance.

  20. A PC-Based Controller for Dextrous Arms

    NASA Technical Reports Server (NTRS)

    Fiorini, Paolo; Seraji, Homayoun; Long, Mark

    1996-01-01

    This paper describes the architecture and performance of a PC-based controller for 7-DOF dextrous manipulators. The computing platform is a 486-based personal computer equipped with a bus extender to access the robot Multibus controller, together with a single board computer as the graphical engine, and with a parallel I/O board to interface with a force-torque sensor mounted on the manipulator wrist.

  1. Capability and Interface Assessment of Gaming Technologies for Future Multi-Unmanned Air Vehicle Systems

    DTIC Science & Technology

    2011-08-01

    resource management games (e.g., Sim City 2000), board game simulations (e.g., VASSAL), and abstract games (e.g., Tetris). The second purpose of the...which occur simultaneously o E.g., Starcraft  Board game o A computer game that emulates a board game o E.g., Archon  2D Side View o A game...a mouse  Joypad o E.g., A playstation/X-box controller  Accelerometer o E.g., A Wii Controller  Touch 22 Distribution A: Approved for

  2. Information Management System for the California State Water Resources Control Board (SWRCB)

    NASA Technical Reports Server (NTRS)

    Heald, T. C.; Redmann, G. H.

    1973-01-01

    A study was made to establish the requirements for an integrated state-wide information management system for water quality control and water quality rights for the State of California. The data sources and end requirements were analyzed for the data collected and used by the numerous agencies, both State and Federal, as well as the nine Regional Boards under the jurisdiction of the State Board. The report details the data interfaces and outlines the system design. A program plan and statement of work for implementation of the project is included.

  3. Board-to-Board Free-Space Optical Interconnections Passing through Boards for a Bookshelf-Assembled Terabit-Per-Second-Class ATM Switch.

    PubMed

    Hirabayashi, K; Yamamoto, T; Matsuo, S; Hino, S

    1998-05-10

    We propose free-space optical interconnections for a bookshelf-assembled terabit-per-second-class ATM switch. Thousands of arrayed optical beams, each having a rate of a few gigabits per second, propagate vertically to printed circuit boards, passing through some boards, and are connected to arbitrary transmitters and receivers on boards by polarization controllers and prism arrays. We describe a preliminary experiment using a 1-mm-pitch 2 x 2 beam-collimator array that uses vertical-cavity surface-emitting laser diodes. These optical interconnections can be made quite stable in terms of mechanical shock and temperature fluctuation by the attachment of reinforcing frames to the boards and use of an autoalignment system.

  4. Video Bandwidth Compression System.

    DTIC Science & Technology

    1980-08-01

    scaling function, located between the inverse DPCM and inverse transform , on the decoder matrix multiplier chips. 1"V1 T.. ---- i.13 SECURITY...Bit Unpacker and Inverse DPCM Slave Sync Board 15 e. Inverse DPCM Loop Boards 15 f. Inverse Transform Board 16 g. Composite Video Output Board 16...36 a. Display Refresh Memory 36 (1) Memory Section 37 (2) Timing and Control 39 b. Bit Unpacker and Inverse DPCM 40 c. Inverse Transform Processor 43

  5. 76 FR 65187 - U.S. Air Force Scientific Advisory Board Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-20

    ... DEPARTMENT OF DEFENSE Department of the Air Force U.S. Air Force Scientific Advisory Board Notice of Meeting AGENCY: US Air Force Scientific Advisory Board, Department of the Air Force, DoD. ACTION: Meeting Cancellation Notice. SUMMARY: Due to difficulties, beyond the control of the U.S. Air Force...

  6. Why Not Charter School Boards?

    ERIC Educational Resources Information Center

    Schlechty, Phillip C.; Cole, Robert W.

    1994-01-01

    Argues that for a community to maintain control over its public schools it must make the school board accountable for the performance of the school and all of its employees. The authors suggest a new approach to school-board elections, addresses key elements needed in state legislation, and explains the existing roadblocks to change. (GLR)

  7. 12 CFR 911.3 - Prohibition on unauthorized use and disclosure of unpublished information.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... of unpublished information. 911.3 Section 911.3 Banks and Banking FEDERAL HOUSING FINANCE BOARD FEDERAL HOUSING FINANCE BOARD ORGANIZATION AND OPERATIONS AVAILABILITY OF UNPUBLISHED INFORMATION § 911.3... information does not constitute a waiver by the Finance Board of any privilege or its right to control...

  8. 12 CFR Appendix A to Part 748 - Guidelines for Safeguarding Member Information

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Implementation of Member Information Security Program A. Involve the Board of Directors B. Assess Risk C. Manage and Control Risk D. Oversee Service Provider Arrangements E. Adjust the Program F. Report to the Board.... Development and Implementation of Member Information Security Program A. Involve the Board of Directors. The...

  9. 12 CFR Appendix A to Part 748 - Guidelines for Safeguarding Member Information

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Implementation of Member Information Security Program A. Involve the Board of Directors B. Assess Risk C. Manage and Control Risk D. Oversee Service Provider Arrangements E. Adjust the Program F. Report to the Board.... Development and Implementation of Member Information Security Program A. Involve the Board of Directors. The...

  10. 12 CFR Appendix A to Part 748 - Guidelines for Safeguarding Member Information

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Implementation of Member Information Security Program A. Involve the Board of Directors B. Assess Risk C. Manage and Control Risk D. Oversee Service Provider Arrangements E. Adjust the Program F. Report to the Board.... Development and Implementation of Member Information Security Program A. Involve the Board of Directors. The...

  11. 12 CFR Appendix A to Part 748 - Guidelines for Safeguarding Member Information

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Implementation of Member Information Security Program A. Involve the Board of Directors B. Assess Risk C. Manage and Control Risk D. Oversee Service Provider Arrangements E. Adjust the Program F. Report to the Board.... Development and Implementation of Member Information Security Program A. Involve the Board of Directors. The...

  12. SPCC- Software Elements for Security Partition Communication Controller

    NASA Astrophysics Data System (ADS)

    Herpel, H. J.; Willig, G.; Montano, G.; Tverdyshev, S.; Eckstein, K.; Schoen, M.

    2016-08-01

    Future satellite missions like Earth Observation, Telecommunication or any other kind are likely to be exposed to various threats aiming at exploiting vulnerabilities of the involved systems and communications. Moreover, the growing complexity of systems coupled with more ambitious types of operational scenarios imply increased security vulnerabilities in the future. In the paper we will describe an architecture and software elements to ensure high level of security on-board a spacecraft. First the threats to the Security Partition Communication Controller (SPCC) will be addressed including the identification of specific vulnerabilities to the SPCC. Furthermore, appropriate security objectives and security requirements are identified to be counter the identified threats. The security evaluation of the SPCC will be done in accordance to the Common Criteria (CC). The Software Elements for SPCC has been implemented on flight representative hardware which consists of two major elements: the I/O board and the SPCC board. The SPCC board provides the interfaces with ground while the I/O board interfaces with typical spacecraft equipment busses. Both boards are physically interconnected by a high speed spacewire (SpW) link.

  13. A survey. Financial accounting and internal control functions pursued by hospital boards.

    PubMed

    Gavin, T A

    1984-09-01

    Justification for a board committee's existence is its ability to devote time to issues judged to be important by the full board. This seems to have happened. Multiple committees pursue more functions than the other committee structures. Boards lacking an FA/IC committee pursue significantly fewer functions than their counterparts with committees. Substantial respondent agreement exists on those functions most and least frequently pursued, those perceived to be most and least important, and those perceived to be most and least effectively undertaken. Distinctions between committee structures and the full board, noted in the previous paragraph, hold true with respect to the importance of functions. All board structures identified reviewing the budget and comparing it to actual results as important. Committee structures are generally more inclined to address functions related to the work of the independent auditor and the effectiveness of the hospital's system and controls than are full board structures. Functions related to the internal auditor are pursued least frequently by all FA/IC board structures. The following suggestions are made to help boards pay adequate attention to and obtain objective information about the financial affairs of their hospitals. Those boards that do not have some form of an FA/IC committee should consider starting one. Evidence shows chief financial officers have been a moving force in establishing and strengthening such committees. Boards having a joint or single committee structure should consider upgrading their structure to either a single committee or multiple committees respectively. The complexity of the healthcare environment requires that more FA/IC functions be addressed by the board. The board or its FA/IC committee(s) should meet with their independent CPA's, fiscal intermediary auditors, and internal auditors. Where the hospital lacks an internal audit function a study should be undertaken to determine the feasibility of initiating such a function. In most cases, the benefits derived from an independent, properly staffed internal audit function far exceed the cost of such a function.

  14. School Board Policy As a Control Mechanism in Curriculum Challenges.

    ERIC Educational Resources Information Center

    Adler, Louise

    1993-01-01

    This journal article examines how school board policies are used to control the controversies that often surround curriculum challenges. Specific key provisions of model policies and actual policies from California are analyzed to suggest ideal policy provisions. In a longitudinal study, over 42 percent of the 1,000-plus school districts in…

  15. 78 FR 21370 - Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-10

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID) In accordance with section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control and Prevention (CDC...

  16. 75 FR 69687 - Board of Scientific Counselors, Office of Infectious Diseases, (BSC, OID)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-15

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Infectious Diseases, (BSC, OID) In accordance with section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control and Prevention (CDC...

  17. 78 FR 11651 - Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-19

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID) In accordance with section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control and Prevention (CDC...

  18. 78 FR 69683 - Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-20

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID) In accordance with section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control and Prevention (CDC...

  19. 78 FR 17411 - Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-21

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID) In accordance with section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control and Prevention (CDC...

  20. 76 FR 24031 - Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-29

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID) In accordance with section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control and Prevention (CDC...

  1. 76 FR 63926 - Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-14

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID) In accordance with section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control and Prevention (CDC...

  2. 77 FR 21778 - Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-11

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID) In accordance with section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control and Prevention (CDC...

  3. 75 FR 66772 - Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-29

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID) In accordance with section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control and Prevention (CDC...

  4. Board of Pesticides Control: Maine ACF

    Science.gov Websites

    | Search Maine.gov Department of Agriculture, Conservation and Forestry Contact Us | Get Email/SMS Updates ; Programs → Bureau of Agriculture → Division of Animal and Plant Health → Board of Pesticides Control Plates Outdoor Heritage Fund Lottery Ticket Donations & More Contact Department of Agriculture

  5. 77 FR 16676 - Approval and Promulgation of Implementation Plans and Operating Permits Program; Commonwealth of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-22

    ... Pollution, submitted to EPA by the Puerto Rico Environmental Quality Board on July 13, 2011. This action...)(2).) List of Subjects 40 CFR Part 52 Environmental protection, Air pollution control, Incorporation... Control of Atmospheric Pollution submitted on July 13, 2011 by the Puerto Rico Environmental Quality Board...

  6. McGee Creek Drainage and Levee District, Illinois.

    DTIC Science & Technology

    1973-04-01

    J COUNTY MC GEE REEK DRAINAGE BLEVEE DISTRICT N~ i, 0. ~ I I LEGEND Co ,. 3 ~ . -~------~----EXISTING LEVEE _____________PROPOSED LEVEE...Development, Conservation, Environmental Protection Agency, Health, Institute for Environmental Quality, Mines and Minerals. Pollution Control Board...Protection Agency, Health, Institute for Environmental Quality, Mines and Minerals, Pollution Control Board, Registration and Education, Transportation

  7. 115. QUALITY CONTROL BOARD FOR MAINTENANCE AND INSPECTION AT SOUTH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    115. QUALITY CONTROL BOARD FOR MAINTENANCE AND INSPECTION AT SOUTH SIDE OF MECHANICAL AND ELECTRICAL ROOM (110), LSB (BLDG. 770), FACING WEST ON EXTERIOR WALL OF QUALITY ASSURANCE ROOM (106A) - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 West, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

  8. 77 FR 24720 - Board of Scientific Counselors, National Center for Environmental Health/Agency for Toxic...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-25

    ... Investigations; update on the Advisory Committee on Childhood Lead Poisoning Prevention; and updates by the BSC... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of.... L. 92-463), the Centers for Disease Control and Prevention (CDC), announces the following meeting of...

  9. 8. DETAIL OF COMPUTER SCREEN AND CONTROL BOARDS: LEFT SCREEN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. DETAIL OF COMPUTER SCREEN AND CONTROL BOARDS: LEFT SCREEN TRACKS RESIDUAL CHLORINE; INDICATES AMOUNT OF SUNLIGHT WHICH ENABLES OPERATOR TO ESTIMATE NEEDED CHLORINE; CENTER SCREEN SHOWS TURNOUT STRUCTURES; RIGHT SCREEN SHOWS INDICATORS OF ALUMINUM SULFATE TANK FARM. - F. E. Weymouth Filtration Plant, 700 North Moreno Avenue, La Verne, Los Angeles County, CA

  10. Notification: FY 2017 Update of Proposed Key Management Challenges and Internal Control Weaknesses Confronting the U.S. Chemical Safety and Hazard Investigation Board

    EPA Pesticide Factsheets

    Jan 5, 2017. The EPA OIG is beginning work to update for fiscal year 2017 its list of proposed key management challenges and internal control weaknesses confronting the U.S. Chemical Safety and Hazard Investigation Board (CSB).

  11. Low-cost USB interface for operant research using Arduino and Visual Basic.

    PubMed

    Escobar, Rogelio; Pérez-Herrera, Carlos A

    2015-03-01

    This note describes the design of a low-cost interface using Arduino microcontroller boards and Visual Basic programming for operant conditioning research. The board executes one program in Arduino programming language that polls the state of the inputs and generates outputs in an operant chamber. This program communicates through a USB port with another program written in Visual Basic 2010 Express Edition running on a laptop, desktop, netbook computer, or even a tablet equipped with Windows operating system. The Visual Basic program controls schedules of reinforcement and records real-time data. A single Arduino board can be used to control a total of 52 inputs/output lines, and multiple Arduino boards can be used to control multiple operant chambers. An external power supply and a series of micro relays are required to control 28-V DC devices commonly used in operant chambers. Instructions for downloading and using the programs to generate simple and concurrent schedules of reinforcement are provided. Testing suggests that the interface is reliable, accurate, and could serve as an inexpensive alternative to commercial equipment. © Society for the Experimental Analysis of Behavior.

  12. Acceleration levels on board the Space Station and a tethered elevator for micro and variable-gravity applications

    NASA Technical Reports Server (NTRS)

    Lorenzini, E. C.; Cosmo, M.; Vetrella, S.; Moccia, A.

    1988-01-01

    This paper investigates the dynamics and acceleration levels of a new tethered system for micro and variable-gravity applications. The system consists of two platforms tethered on opposite sides to the Space Station. A fourth platform, the elevator, is placed in between the Space Station and the upper platform. Variable-g levels on board the elevator are obtained by moving this facility along the upper tether, while micro-g experiments are carried out on board the Space Station. By controlling the length of the lower tether the position of the system CM can be maintained on board the Space Station despite variations of the station's distribution of mass. The paper illustrates the mathematical model, the environmental perturbations and the control techniques which have been adopted for the simulation and control of the system dynamics. Two sets of results from two different simulation runs are shown. The first set shows the system dynamics and the acceleration spectra on board the Space Station and the elevator during station-keeping. The second set of results demonstrates the capability of the elevator to attain a preselected g-level.

  13. 49 CFR 1007.11 - Public notice of records systems.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... BOARD, DEPARTMENT OF TRANSPORTATION GENERAL RULES AND REGULATIONS RECORDS CONTAINING INFORMATION ABOUT... use; (5) The policies and practices of the Board regarding storage, retrieval, access controls...

  14. 49 CFR 1007.11 - Public notice of records systems.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... BOARD, DEPARTMENT OF TRANSPORTATION GENERAL RULES AND REGULATIONS RECORDS CONTAINING INFORMATION ABOUT... use; (5) The policies and practices of the Board regarding storage, retrieval, access controls...

  15. 49 CFR 1007.11 - Public notice of records systems.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... BOARD, DEPARTMENT OF TRANSPORTATION GENERAL RULES AND REGULATIONS RECORDS CONTAINING INFORMATION ABOUT... use; (5) The policies and practices of the Board regarding storage, retrieval, access controls...

  16. 49 CFR 1007.11 - Public notice of records systems.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... BOARD, DEPARTMENT OF TRANSPORTATION GENERAL RULES AND REGULATIONS RECORDS CONTAINING INFORMATION ABOUT... use; (5) The policies and practices of the Board regarding storage, retrieval, access controls...

  17. 49 CFR 1007.11 - Public notice of records systems.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... BOARD, DEPARTMENT OF TRANSPORTATION GENERAL RULES AND REGULATIONS RECORDS CONTAINING INFORMATION ABOUT... use; (5) The policies and practices of the Board regarding storage, retrieval, access controls...

  18. Board task performance: An exploration of micro- and macro-level determinants of board effectiveness

    PubMed Central

    Minichilli, Alessandro; Zattoni, Alessandro; Nielsen, Sabina; Huse, Morten

    2012-01-01

    This paper addresses recent calls to narrow the micro–macro gap in management research (Bamberger, 2008), by incorporating a macro-level context variable (country) in exploring micro-level determinants of board effectiveness. Following the integrated model proposed by Forbes and Milliken (1999), we identify three board processes as micro-level determinants of board effectiveness. Specifically, we focus on effort norms, cognitive conflicts and the use of knowledge and skills as determinants of board control and advisory task performance. Further, we consider how two different institutional settings influence board tasks, and how the context moderates the relationship between processes and tasks. Our hypotheses are tested on a survey-based dataset of 535 medium-sized and large industrial firms in Italy and Norway, which are considered to substantially differ along legal and cultural dimensions. The findings show that: (i) Board processes have a larger potential than demographic variables to explain board task performance; (ii) board task performance differs significantly between boards operating in different contexts; and (iii) national context moderates the relationships between board processes and board task performance. Copyright © 2010 John Wiley & Sons, Ltd. PMID:23365485

  19. Governing board structure, business strategy, and performance of acute care hospitals: a contingency perspective.

    PubMed Central

    Young, G; Beekun, R I; Ginn, G O

    1992-01-01

    Contingency theory suggests that for a hospital governing board to be effective in taking on a more active role in strategic management, the board needs to be structured to complement the overall strategy of the organization. A survey study was conducted to examine the strategies of acute care hospitals as related to the structural characteristics of their governing boards. After controlling for organizational size and system membership, results indicated a significant relationship between the governing board structure of 109 acute care hospitals and their overall business strategy. Strategy also accounted for more of the variance in board structure than either organization size or system membership. Finally, the greater the match between board structure and hospital strategy, the stronger the hospitals' financial performance. PMID:1399656

  20. Development of land based radar polarimeter processor system

    NASA Technical Reports Server (NTRS)

    Kronke, C. W.; Blanchard, A. J.

    1983-01-01

    The processing subsystem of a land based radar polarimeter was designed and constructed. This subsystem is labeled the remote data acquisition and distribution system (RDADS). The radar polarimeter, an experimental remote sensor, incorporates the RDADS to control all operations of the sensor. The RDADS uses industrial standard components including an 8-bit microprocessor based single board computer, analog input/output boards, a dynamic random access memory board, and power supplis. A high-speed digital electronics board was specially designed and constructed to control range-gating for the radar. A complete system of software programs was developed to operate the RDADS. The software uses a powerful real time, multi-tasking, executive package as an operating system. The hardware and software used in the RDADS are detailed. Future system improvements are recommended.

  1. School Boards: the Overlooked Shapers of School Culture and Organizational Efficiency

    ERIC Educational Resources Information Center

    Graham, Edward S.

    2010-01-01

    As a result of increased federal control, the push for national curricula, and explicit school accountability standards, the ability of local school boards to lead public education has been questioned and left unanswered by the lack of applicable school board research. Hence, the purpose of this study was to consider the relationship between…

  2. The Effects of School Board Consolidation and Financing on Student Performance

    ERIC Educational Resources Information Center

    Leach, John; Payne, A. Abigail; Chan, Steve

    2010-01-01

    Over the last 20 years, states and provinces have become increasingly involved in the financing and administration of elementary and secondary education. Local school boards, however, still retain control over key aspects of the provision of education. Historically, these boards were organized at the community level so as to meet the wants of the…

  3. 31 CFR 132.1 - Authority, purpose, collection of information, and incorporation by reference.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... reference. (a) Authority. This part is issued jointly by the Board of Governors of the Federal Reserve System (Board) and the Secretary of the Department of the Treasury (Treasury) under section 802 of the... Department of the Treasury and assigned OMB control number 1505-0204. The Board has approved the collection...

  4. 31 CFR 132.1 - Authority, purpose, collection of information, and incorporation by reference.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... reference. (a) Authority. This part is issued jointly by the Board of Governors of the Federal Reserve System (Board) and the Secretary of the Department of the Treasury (Treasury) under section 802 of the... Department of the Treasury and assigned OMB control number 1505-0204. The Board has approved the collection...

  5. 31 CFR 132.1 - Authority, purpose, collection of information, and incorporation by reference.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... reference. (a) Authority. This part is issued jointly by the Board of Governors of the Federal Reserve System (Board) and the Secretary of the Department of the Treasury (Treasury) under section 802 of the... Department of the Treasury and assigned OMB control number 1505-0204. The Board has approved the collection...

  6. 78 FR 78964 - Subcommittee for Dose Reconstruction Reviews (SDRR), Advisory Board on Radiation and Worker...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-27

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Subcommittee for Dose Reconstruction Reviews (SDRR), Advisory Board on Radiation and Worker Health (ABRWH or the Advisory Board), National Institute for Occupational Safety and Health (NIOSH) In accordance with section 10(a)(2) of the Federal Advisory Committee Ac...

  7. 12 CFR 225.89 - How to request approval to engage in an activity that is complementary to a financial activity?

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... CHANGE IN BANK CONTROL (REGULATION Y) Regulations Financial Holding Companies § 225.89 How to request... holding company and to the financial system generally; (5) Describe the potential adverse effects... effects. (c) Board action. The Board will inform the financial holding company in writing of the Board's...

  8. Assisting people with disabilities to actively improve their collaborative physical activities with Nintendo Wii Balance Boards by controlling environmental stimulation.

    PubMed

    Shih, Ching-Hsiang; Chen, Ling-Che; Shih, Ching-Tien

    2012-01-01

    The latest researches have adopted software technology to modify the Nintendo Wii Balance Board functionality and used it to enable two people with developmental disabilities to actively perform physical activities. This study extended the latest research of the Wii Balance Board application to assess whether four people (two groups) with developmental disabilities would be able to actively improve their physical activities collaboration--walking to the designated location following simple instructions, by controlling their favorite environmental stimulation through using three Nintendo Wii Balance Boards. We employed an A-B-A-B design, with A represented the baseline and B represented intervention phases. Data showed that both groups of participants significantly increased their collaborative target response (collaboratively performing designated physical activities) by activating the control system to produce their preferred environmental stimulation during the intervention phases. Practical and developmental implications of the findings are discussed. Copyright © 2011 Elsevier Ltd. All rights reserved.

  9. Case study of rotating sonar sensor application in unmanned automated guided vehicle

    NASA Astrophysics Data System (ADS)

    Chandak, Pravin; Cao, Ming; Hall, Ernest L.

    2001-10-01

    A single rotating sonar element is used with a restricted angle of sweep to obtain readings to develop a range map for the unobstructed path of an autonomous guided vehicle (AGV). A Polaroid ultrasound transducer element is mounted on a micromotor with an encoder feedback. The motion of this motor is controlled using a Galil DMC 1000 motion control board. The encoder is interfaced with the DMC 1000 board using an intermediate IMC 1100 break-out board. By adjusting the parameters of the Polaroid element, it is possible to obtain range readings at known angles with respect to the center of the robot. The readings are mapped to obtain a range map of the unobstructed path in front of the robot. The idea can be extended to a 360 degree mapping by changing the assembly level programming on the Galil Motion control board. Such a system would be compact and reliable over a range of environments and AGV applications.

  10. Development of a multisensor-based bio-botanic robot and its implementation using a self-designed embedded board.

    PubMed

    Chang, Chung-Liang; Sie, Ming-Fong; Shie, Jin-Long

    2011-01-01

    This paper presents the design concept of a bio-botanic robot which demonstrates its behavior based on plant growth. Besides, it can reflect the different phases of plant growth depending on the proportional amounts of light, temperature and water. The mechanism design is made up of a processed aluminum base, spring, polydimethylsiloxane (PDMS) and actuator to constitute the plant base and plant body. The control system consists of two micro-controllers and a self-designed embedded development board where the main controller transmits the values of the environmental sensing module within the embedded board to a sub-controller. The sub-controller determines the growth stage, growth height, and time and transmits its decision value to the main controller. Finally, based on the data transmitted by the sub-controller, the main controller controls the growth phase of the bio-botanic robot using a servo motor and leaf actuator. The research result not only helps children realize the variation of plant growth but also is entertainment-educational through its demonstration of the growth process of the bio-botanic robot in a short time.

  11. 76 FR 28438 - Board of Scientific Counselors (BSC), National Center for Injury Prevention and Control (NCIPC)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-17

    ... below concerns RFA CE10-004, the National Academic Centers of Excellence in Youth Violence Prevention... Violence Prevention (U01). Contact Person for More Information: Gwendolyn Haile Cattledge, PhD, M.S.E.H., F... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of...

  12. Interface between a printed circuit board computer aided design tool (Tektronix 4051 based) and a numerical paper tape controlled drill press (Slo-Syn 530: 100 w/ Dumore Automatic Head Number 8391)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Heckman, B.K.; Chinn, V.K.

    1981-01-01

    The development and use of computer programs written to produce the paper tape needed for the automation, or numeric control, of drill presses employed to fabricate computed-designed printed circuit boards are described. (LCL)

  13. Lessons Learned from a School/Community Strategic Planning Process

    ERIC Educational Resources Information Center

    Hauser, Billie A.

    2004-01-01

    The West Virginia State Board of Education assumed administrative control of the Lincoln county school system in June 2000, following a state report on the county?s failure to make adequate progress in rectifying major deficiencies identified in an October 1999 audit. One of the conditions for regaining local board control was that the Lincoln…

  14. A new standing posture detector to enable people with multiple disabilities to control environmental stimulation by changing their standing posture through a commercial Wii Balance Board.

    PubMed

    Shih, Ching-Hsiang; Shih, Ching-Tien; Chiang, Ming-Shan

    2010-01-01

    This study assessed whether two persons with multiple disabilities would be able to control environmental stimulation using body swing (changing standing posture) and a Wii Balance Board with a newly developed standing posture detection program (i.e. a new software program turns a Wii Balance Board into a precise standing posture detector). The study was performed according to an ABAB design, in which A represented baseline and B represented intervention phases. Both participants significantly increased their target response (body swing) to activate the control system to produce environmental stimulation during the intervention phases. Practical and developmental implications of the findings were discussed.

  15. A standing location detector enabling people with developmental disabilities to control environmental stimulation through simple physical activities with Nintendo Wii Balance Boards.

    PubMed

    Shih, Ching-Hsiang

    2011-01-01

    This study evaluated whether two people with developmental disabilities would be able to actively perform simple physical activities by controlling their favorite environmental stimulation using Nintendo Wii Balance Boards with a newly developed standing location detection program (SLDP, i.e., a new software program turning a Nintendo Wii Balance Board into a standing location detector). This study was carried out using to an ABAB design. The data showed that both participants significantly increased their simple physical activity (target response) to activate the control system to produce environmental stimulation during the B (intervention) phases. The practical and developmental implications of the findings are discussed. Copyright © 2010 Elsevier Ltd. All rights reserved.

  16. [Atomic Energy Control Board] annual report 1997--1998. Research report number INFO-9999-1 (in English;French)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1998-11-01

    The Board`s mission is to ensure that the use of nuclear energy in Canada does not pose undue risk to health, safety, security and the environment. The annual report of the Board presents information on regulatory requirements; nuclear facilities, from uranium mines to nuclear power plants and related operations; regulation of nuclear materials; radioactive waste management; compliance monitoring; research; non-proliferation, safeguards and security; international activities, and public information. A financial statement is also included.

  17. Modular space vehicle boards, control software, reprogramming, and failure recovery

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Judd, Stephen; Dallmann, Nicholas; McCabe, Kevin

    A space vehicle may have a modular board configuration that commonly uses some or all components and a common operating system for at least some of the boards. Each modular board may have its own dedicated processing, and processing loads may be distributed. The space vehicle may be reprogrammable, and may be launched without code that enables all functionality and/or components. Code errors may be detected and the space vehicle may be reset to a working code version to prevent system failure.

  18. Development of a Novel, Two-Processor Architecture for a Small UAV Autopilot System,

    DTIC Science & Technology

    2006-07-26

    is, and the control laws the user implements to control it. The flight control system board will contain the processor selected for this system...Unit (IMU). The IMU contains solid-state gyros and accelerometers and uses these to determine the attitude of the UAV within the three dimensions of...multiple-UAV swarming for combat support operations. The mission processor board will contain the processor selected to execute the mission

  19. Test Program of the "Combined Data and Power Management Infrastructure"

    NASA Astrophysics Data System (ADS)

    Eickhoff, Jens; Fritz, Michael; Witt, Rouven; Bucher, Nico; Roser, Hans-Peter

    2013-08-01

    As already published in previous DASIA papers, the University of Stuttgart, Germany, is developing an advanced 3-axis stabilized small satellite applying industry standards for command/control techniques and Onboard Software design. This satellite furthermore features an innovative hybrid architecture of Onboard Computer and Power Control and Distribution Unit. One of the main challenges was the development of an ultra-compact and performing Onboard Computer (OBC), which was intended to support an RTEMS operating system, a PUS standard based Onboard Software (OBSW) and CCSDS standard based ground/space communication. The developed architecture (see [1, 2, 3]) is called a “Combined Onboard Data and Power Management Infrastructure” - CDPI. It features: The OBC processor boards based on a LEON3FT architecture - from Aeroflex Inc., USA The I/O Boards for all OBC digital interfaces to S/C equipment (digital RIU) - from 4Links Ltd. UK CCSDS TC/TM decoder/encoder boards - with same HW design as I/O boards - just with limited number of interfaces. HW from 4Links Ltd, UK, driver SW and IP-Core from Aeroflex Gaisler, SE Analog RIU functions via enhanced PCDU from Vectronic Aerospace, D OBC reconfiguration unit functions via Common Controller - here in PCDU [4] The CDPI overall assembly is meanwhile complete and a exhaustive description can be found in [5]. The EM test campaign including the HW/SW compatibility testing is finalized. This comprises all OBC EM units, OBC EM assembly and the EM PCDU. The unit test program for the FM Processor-Boards and Power-Boards of the OBC are completed and the unit tests of FM I/O-Boards and CCSDS-Boards have been completed by 4Links at the assembly house. The subsystem tests of the assembled OBC also are completed and the overall System tests of the CDPI with system reconfiguration in diverse possible FDIR cases also reach the last steps. Still ongoing is the subsequent integration of the CDPI with the satellite's avionics components encompassing TTC, AOCS, Power and Payload Control. This paper provides a full picture of the test campaign. Further details can be taken from

  20. Modular chassis simplifies packaging and interconnecting of circuit boards

    NASA Technical Reports Server (NTRS)

    Arens, W. E.; Boline, K. G.

    1964-01-01

    A system of modular chassis structures has simplified the design for mounting a number of printed circuit boards. This design is structurally adaptable to computer and industrial control system applications.

  1. 12 CFR 223.3 - What are the meanings of the other terms used in sections 23A and 23B and this part?

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Board's satisfaction, that the company or shareholder should not be deemed to control the securities. (5... shareholder presents information to the Board that demonstrates, to the Board's satisfaction, that the company...) “Depository institution” means, unless otherwise noted, an insured depository institution (as defined in...

  2. View of button board which accommodates the 1200 button switches ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of button board which accommodates the 1200 button switches which manually control the indicating pilot lights on the model board. Not all switches are active, some switches were installed for a planned, but never constructed, system expansion. - Thirtieth Street Station, Load Dispatch Center, Thirtieth & Market Streets, Railroad Station, Amtrak (formerly Pennsylvania Railroad Station), Philadelphia, Philadelphia County, PA

  3. Assisting People with Disabilities to Actively Improve Their Collaborative Physical Activities with Nintendo Wii Balance Boards by Controlling Environmental Stimulation

    ERIC Educational Resources Information Center

    Shih, Ching-Hsiang; Chen, Ling-Che; Shih, Ching-Tien

    2012-01-01

    The latest researches have adopted software technology to modify the Nintendo Wii Balance Board functionality and used it to enable two people with developmental disabilities to actively perform physical activities. This study extended the latest research of the Wii Balance Board application to assess whether four people (two groups) with…

  4. The School Elections: A Critique of the 1969 New York City School Decentralization.

    ERIC Educational Resources Information Center

    Demas, Boulton H.

    When local school board members in New York City assumed office on 31 local school boards in 1969, this should have resulted in more responsive local boards with sufficient power to control local policy; but this was not the actual result. Specific examination of the decentralization bill, the politics of the election, and the election procedures…

  5. Ultraino: An Open Phased-Array System for Narrowband Airborne Ultrasound Transmission.

    PubMed

    Marzo, Asier; Corkett, Tom; Drinkwater, Bruce W

    2018-01-01

    Modern ultrasonic phased-array controllers are electronic systems capable of delaying the transmitted or received signals of multiple transducers. Configurable transmit-receive array systems, capable of electronic steering and shaping of the beam in near real-time, are available commercially, for example, for medical imaging. However, emerging applications, such as ultrasonic haptics, parametric audio, or ultrasonic levitation, require only a small subset of the capabilities provided by the existing controllers. To meet this need, we present Ultraino, a modular, inexpensive, and open platform that provides hardware, software, and example applications specifically aimed at controlling the transmission of narrowband airborne ultrasound. Our system is composed of software, driver boards, and arrays that enable users to quickly and efficiently perform research in various emerging applications. The software can be used to define array geometries, simulate the acoustic field in real time, and control the connected driver boards. The driver board design is based on an Arduino Mega and can control 64 channels with a square wave of up to 17 Vpp and /5 phase resolution. Multiple boards can be chained together to increase the number of channels. The 40-kHz arrays with flat and spherical geometries are demonstrated for parametric audio generation, acoustic levitation, and haptic feedback.

  6. 78 FR 42521 - Agency Information Collection Activities: Announcement of Board Approval Under Delegated...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-16

    ... Regulations on Controlling Paperwork Burdens on the Public). Board-approved collections of information are... any information pursuant to this information collection beyond what is made publicly available, no...

  7. Unprofessional behavior in medical school is associated with subsequent disciplinary action by a state medical board.

    PubMed

    Papadakis, Maxine A; Hodgson, Carol S; Teherani, Arianne; Kohatsu, Neal D

    2004-03-01

    To determine if medical students who demonstrate unprofessional behavior in medical school are more likely to have subsequent state board disciplinary action. A case-control study was conducted of all University of California, San Francisco, School of Medicine graduates disciplined by the Medical Board of California from 1990-2000 (68). Control graduates (196) were matched by medical school graduation year and specialty choice. Predictor variables were male gender, undergraduate grade point average, Medical College Admission Test scores, medical school grades, National Board of Medical Examiner Part 1 scores, and negative excerpts describing unprofessional behavior from course evaluation forms, dean's letter of recommendation for residencies, and administrative correspondence. Negative excerpts were scored for severity (Good/Trace versus Concern/Problem/Extreme). The outcome variable was state board disciplinary action. The alumni graduated between 1943 and 1989. Ninety-five percent of the disciplinary actions were for deficiencies in professionalism. The prevalence of Concern/Problem/Extreme excerpts in the cases was 38% and 19% in controls. Logistic regression analysis showed that disciplined physicians were more likely to have Concern/Problem/Extreme excerpts in their medical school file (odds ratio, 2.15; 95% confidence interval, 1.15-4.02; p =.02). The remaining variables were not associated with disciplinary action. Problematic behavior in medical school is associated with subsequent disciplinary action by a state medical board. Professionalism is an essential competency that must be demonstrated for a student to graduate from medical school.

  8. Assisting People with Multiple Disabilities Actively Correct Abnormal Standing Posture with a Nintendo Wii Balance Board through Controlling Environmental Stimulation

    ERIC Educational Resources Information Center

    Shih, Ching-Hsiang; Shih, Ching-Tien; Chu, Chiung-Ling

    2010-01-01

    The latest researches adopted software technology turning the Nintendo Wii Balance Board into a high performance change of standing posture (CSP) detector, and assessed whether two persons with multiple disabilities would be able to control environmental stimulation using body swing (changing standing posture). This study extends Wii Balance Board…

  9. A Standing Location Detector Enabling People with Developmental Disabilities to Control Environmental Stimulation through Simple Physical Activities with Nintendo Wii Balance Boards

    ERIC Educational Resources Information Center

    Shih, Ching-Hsiang

    2011-01-01

    This study evaluated whether two people with developmental disabilities would be able to actively perform simple physical activities by controlling their favorite environmental stimulation using Nintendo Wii Balance Boards with a newly developed standing location detection program (SLDP, i.e., a new software program turning a Nintendo Wii Balance…

  10. Agreement Between the Board of Control of Ferris State College, Big Rapids, Michigan and The Ferris Faculty Association - MEA-NEA 1973-75.

    ERIC Educational Resources Information Center

    Ferris State Coll., Big Rapids, MI.

    This agreement between the Board of Control of Ferris State College and the Ferris Faculty Association--MEA-NEA covers the period 1973-75. Sections of the agreement cover the basic contractual provisions, rights of the association, faculty rights, administrative responsibilities, promotions and transfers, teaching conditions, retrenchment,…

  11. Master Agreement between Northern Michigan University Board of Control and American Association of University Professors, Northern Michigan Chapter, June 30, 1987-June 30 1990.

    ERIC Educational Resources Information Center

    American Association of Univ. Professors, Washington, DC.

    The collective bargaining agreement between Northern Michigan University Board of Control and Northern Michigan University chapter of the American Association of University Professors covering the period June 30, 1987-June 30, 1990 is presented. Items covered in the agreement include: chapter recognition, nondiscrimination, access to information,…

  12. Octafluoropropane Concentration Dynamics on Board the International Space Station

    NASA Technical Reports Server (NTRS)

    Perry, J. L.

    2003-01-01

    Since activating the International Space Station s (IS9 Service Module in November 2000, archival air quality samples have shown highly variable concentrations of octafluoropropane in the cabin. This variability has been directly linked to leakage from air conditioning systems on board the Service Module, Zvezda. While octafluoro- propane is not highly toxic, it presents a significant chal- lenge to the trace contaminant control systems. A discussion of octafluoropropane concentration dynamics is presented and the ability of on board trace contami- nant control systems to effectively remove octafluoropro- pane from the cabin atmosphere is assessed. Consideration is given to operational and logistics issues that may arise from octafluoropropane and other halo- carbon challenges to the contamination control systems as well as the potential for effecting cabin air quality.

  13. Evaluation of a Transportable Hot-Gas Decontamination System for the Decontamination of Explosives-Contaminated Debris & Piping. Operations & Maintenance Manual. Volume III.

    DTIC Science & Technology

    1995-06-27

    Terminal Board............ $55.00 CONTROLS E-53-29 ( Non -etock: 2 weeks) Ebony Terminal Board with Screws ..........$70.00 NOTE: All control orders...in XL and TF models after 198 1. Non -asbe stos listed prices. mstedial is used.II Honeywell UDC 3000 Single Set Point Control $550.00 Small Roind...Honeywell. Leeds and Northrup, NOTE- This looks like a mushroom wit a. 314? hole in the Research Inc. and many other controls are available by center

  14. 7 CFR 1219.53 - Budget and expenses.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... the Order. (d) With the approval of the Secretary, the Board may borrow money for the payment of... contributions shall be free from any encumbrance by the donor, and the Board shall retain complete control of...

  15. 7 CFR 1219.53 - Budget and expenses.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... the Order. (d) With the approval of the Secretary, the Board may borrow money for the payment of... contributions shall be free from any encumbrance by the donor, and the Board shall retain complete control of...

  16. 7 CFR 1219.53 - Budget and expenses.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... the Order. (d) With the approval of the Secretary, the Board may borrow money for the payment of... contributions shall be free from any encumbrance by the donor, and the Board shall retain complete control of...

  17. Design and development of control unit and software for the ADFOSC instrument of the 3.6 m Devasthal optical telescope

    NASA Astrophysics Data System (ADS)

    Kumar, T. S.

    2016-08-01

    In this paper, we describe the details of control unit and GUI software for positioning two filter wheels, a slit wheel and a grism wheel in the ADFOSC instrument. This is a first generation instrument being built for the 3.6 m Devasthal optical telescope. The control hardware consists of five electronic boards based on low cost 8-bit PIC microcontrollers and are distributed over I2C bus. The four wheels are controlled by four identical boards which are configured in I2C slave mode while the fifth board acts as an I2C master for sending commands to and receiving status from the slave boards. The master also communicates with the interfacing PC over TCP/IP protocol using simple ASCII commands. For moving the wheels stepper motors along with suitable amplifiers have been employed. Homing after powering ON is achieved using hall effect sensors. By implementing distributed control units having identical design modularity is achieved enabling easier maintenance and upgradation. A GUI based software for commanding the instrument is developed in Microsoft Visual C++. For operating the system during observations the user selects normal mode while the engineering mode is available for offering additional flexibility and low level control during maintenance and testing. A detailed time-stamped log of commands, status and errors are continuously generated. Both the control unit and the software have been successfully tested and integrated with the ADFOSC instrument.

  18. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Fulkerson, Edward; Lanning, Rodney K.; Telford, Steven

    A device includes a u-channel shaped member and a printed circuit board including a plurality of capacitors. Each of the plurality of capacitors has a mounting surface mounted to the printed circuit board and an opposing heat transfer surface thermally coupled to the u-channel shaped member. The device also includes an output cable coupled to the printed circuit board and a return cable coupled to the printed circuit board. The device further includes a control transistor disposed inside the u-channel shaped member and a current sensing resistor disposed inside the u-channel shaped member.

  19. Development of a Plan to Assist Ships in Preparing for the Propulsion Examination Board (PEB) Light-Off Examination (LOE). Phase I.

    DTIC Science & Technology

    1974-02-01

    least one of the board members shall be a certified boiler inspector. c. Each board will be a permanently established examining board reporting to the...Initial Light-Off Examination - to be conducted prior to lighting the first fire in any boiler during a regular overhaul, major conversion, or fitting... boiler water and feed water sampling and analysis and casualty control walk-thru drills may be conducted at the discretion of the senior member (or his

  20. Enabling People with Developmental Disabilities to Actively Follow Simple Instructions and Perform Designated Physical Activities According to Simple Instructions with Nintendo Wii Balance Boards by Controlling Environmental Stimulation

    ERIC Educational Resources Information Center

    Shih, Ching-Hsiang; Chung, Chiao-Chen; Shih, Ching-Tien; Chen, Ling-Che

    2011-01-01

    The latest researches have adopted software technology turning the Nintendo Wii Balance Board into a high performance standing location detector. This study extended Wii Balance Board functionality to assess whether two people with developmental disabilities would be able to actively perform designated physical activities according to simple…

  1. Use of On- Board File System: A Real Simplification for the Operators?

    NASA Astrophysics Data System (ADS)

    Olive, X.; Garcia, G.; Alison, B.; Charmeau, M. C.

    2008-08-01

    On-board file system allows to control and operate a spacecraft in new way offering more possibilities. It should permit to provide to the Operator a more abstract data view of the spacecraft, letting them focus on the functional part of their work and not on the exchange mechanism between Ground and Board. Files are usually used in the recent space project but in a restricted way limiting their capabilities. In this paper we describe what we consider as being a file system and its usage on 2 examples among those studied : OBCP and patch. We discuss how files can be handled with the PUS standard and give in the last section some perspectives such as the use of files to standardize all the exchange between Ground / Board and Board / Board.

  2. Development of a Multisensor-Based Bio-Botanic Robot and Its Implementation Using a Self-Designed Embedded Board

    PubMed Central

    Chang, Chung-Liang; Sie, Ming-Fong; Shie, Jin-Long

    2011-01-01

    This paper presents the design concept of a bio-botanic robot which demonstrates its behavior based on plant growth. Besides, it can reflect the different phases of plant growth depending on the proportional amounts of light, temperature and water. The mechanism design is made up of a processed aluminum base, spring, polydimethylsiloxane (PDMS) and actuator to constitute the plant base and plant body. The control system consists of two micro-controllers and a self-designed embedded development board where the main controller transmits the values of the environmental sensing module within the embedded board to a sub-controller. The sub-controller determines the growth stage, growth height, and time and transmits its decision value to the main controller. Finally, based on the data transmitted by the sub-controller, the main controller controls the growth phase of the bio-botanic robot using a servo motor and leaf actuator. The research result not only helps children realize the variation of plant growth but also is entertainment-educational through its demonstration of the growth process of the bio-botanic robot in a short time. PMID:22247684

  3. The Effect of Localized Air Emission on the Drag of a Slender Surface Craft

    DTIC Science & Technology

    1991-03-01

    by bldc number) FIELD GROUP SUB-GROUP Microbubbles Drag Reduction 19. ABSTRACT (Continue on revere it neceaaly and idenity by biock number) In an...the compressor and the storage tanks. The tank manifold was connected through 30 ft of I in. I.D. hose to the metering and control board. The control ...from the control board, at the cabin level of the carriage, through twin 20 ft legs of 3/4 in. I.D. hose to manifolds mounted on the carriage

  4. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hutchinson, Kenneth

    Vegetation Management on sections of the McNary-Ross, McNary-Horse Heaven, Horse Heaven-Harvarlum, Harvarlum-Big Eddy, and Hanford-John Day Transmission lines. The treatment areas are identified in Step 1 of the Planning Steps shown below. The work will involve the control of noxious weeds in the subject rights-of-ways (ROWs). BPA, in cooperation with the various County Noxious Weed Control Boards and associated landowners, will provide resources to assist landowners in controlling noxious weeds on the subject ROWs. The Weed Board will perform all activities on behalf of BPA.

  5. Technical feasibility of an ROV with on-board power

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sayer, P.; Bo, L.

    1994-12-31

    An ROI`s electric power, control and communication signals are supplied from a surface ship or platform through an umbilical cable. Though cable design has evolved steadily, there are still severe limitations such as heavy weight and cost. It is well known that the drag imposed by the cable limits the operational range of the ROV in deep water. On the other hand, a cable-free AUV presents problems in control, communication and transmission of data. Therefore, an ROV with on-board and small-diameter cable could offer both a large operating range (footprint) and real-time control. This paper considers the feasibility of suchmore » an ROV with on-board power, namely a Self-Powered ROV (SPROV). The selection of possible power sources is first discussed before comparing the operational performance of an SPROV against a conventional ROV. It is demonstrated how an SPROV with a 5mm diameter tether offers a promising way forward, with on-board power of up to 40 kW over 24 hours. In water depths greater than 50m the reduced drag of the SPROV tether is very advantageous.« less

  6. Alberta's and Ontario's liquor boards: why such divergent outcomes?

    PubMed

    Bird, Malcolm G

    2010-01-01

    The provinces of Alberta and Ontario have chosen very different methods to distribute alcoholic beverages: Alberta privatized the Alberta Liquor Control Board (ALCB) in 1993 and established a private market to sell beverage alcohol, while Ontario, in stark contrast, opted to retain and expand the Liquor Control Board of Ontario (LCBO). This article examines the reasons for the divergent policy choices made by Ralph Klein and Mike Harris' Conservative governments in each province. The article draws on John Kingdon's “multiple streams decision-making model,” to examine the mindsets of the key decision-makers, as well as “historical institutionalism,” to organize the pertinent structural, historical and institutional variables that shaped the milieu in which decision-makers acted. Unique, province-specific political cultures, histories, institutional configurations (including the relative influence of a number of powerful actors), as well as the fact that the two liquor control boards were on opposing trajectories towards their ultimate fates, help to explain the different decisions made by each government. Endogenous preference construction in this sector, furthermore, implies that each system is able to satisfy all relevant stakeholders, including consumers.

  7. Evaluation of telerobotic systems using an instrumented task board

    NASA Technical Reports Server (NTRS)

    Carroll, John D.; Gierow, Paul A.; Bryan, Thomas C.

    1991-01-01

    An instrumented task board was developed at NASA Marshall Space Flight Center (MSFC). An overview of the task board design, and current development status is presented. The task board was originally developed to evaluate operator performance using the Protoflight Manipulator Arm (PFMA) at MSFC. The task board evaluates tasks for Orbital Replacement Unit (ORU), fluid connect and transfers, electrical connect/disconnect, bolt running, and other basic tasks. The instrumented task board measures the 3-D forces and torques placed on the board, determines the robot arm's 3-D position relative to the task board using IR optics, and provides the information in real-time. The PFMA joint input signals can also be measured from a breakout box to evaluate the sensitivity or response of the arm operation to control commands. The data processing system provides the capability for post processing of time-history graphics and plots of the PFMA positions, the operator's actions, and the PFMA servo reactions in addition to real-time force/torque data presentation. The instrumented task board's most promising use is developing benchmarks for NASA centers for comparison and evaluation of telerobotic performance.

  8. Agreement between Board of Control, Northern Michigan University, and American Association of University Professors, Northern Michigan University Chapter, July 1, 1984-June 30, 1987.

    ERIC Educational Resources Information Center

    American Association of Univ. Professors, Washington, DC.

    The collective bargaining agreement between Northern Michigan University Board of Control and Northern Michigan University Chapter (280 members) of the American Association of University Professors (AAUP) covering the period July 1, 1984-June 30, 1987 is presented. Items covered in the agreement include: definitions and recognition of AAUP;…

  9. Contract-Based Integration of Cyber-Physical Analyses

    DTIC Science & Technology

    2014-10-14

    for cyber-physical systems , 2013 [3] Torngren et al. Integrating viewpoints in the development of mechatronic products, 2013 [4] Rajhans et al...Conference on Embedded Software Report Documentation Page Form ApprovedOMB No. 0704-0188 Public reporting burden for the collection of information is...failures 5 Analytic aspect of integration Sensor Sampling PID Controller Actuator Controller Communication bus Sensor board CPU Actuator board System Bin

  10. 5 CFR Appendix A to Part 1320 - Agencies With Delegated Review and Approval Authority

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... the Board in advance with a block of control numbers which the Board will assign in sequential order... of automated, electronic, mechanical, or other technological collection techniques or other forms of...

  11. Recommendations for assessing water quality and safety on board merchant ships.

    PubMed

    Grappasonni, Iolanda; Cocchioni, Mario; Degli Angioli, Rolando; Saturnino, Andrea; Sibilio, Fabio; Scuri, Stefania; Amenta, Francesco

    2013-01-01

    Health and diseases on board ships may depend on water. Interventions to improve the quality of water may bring to significant benefits to health and water stores/supply and should be controlledto protect health. This paper has reviewed the main regulations for the control of water safety and qualityon board ships and presents some practical recommendations for keeping water healthy and safe in passenger and cargo merchant ships. The main international regulations and guidelines on the topic were analysed. Guidelines forWater Quality on Board Merchant Ships Including Passenger Vessels of Health Protection Agency, World Health Organisation (WHO) Guide to Ship Sanitation, WHO Guidelines for Drinking Water Quality, WHO Water Safety Plan and the United States Center for Disease Control and Prevention Vessel Sanitation Program were examined. Recommendations for passenger and, if available, for cargo ships were collected and compared. Recommended questionnaire: A questionnaire summarising the main information to collect for assessingthe enough quality of water for the purposes it should be used on board is proposed. The need of havinga crew member with water assessment duties on board, trained for performing these activities properlyis discussed. Water quality on board ships should be monitored routinely. Monitoring should be directedto chemical and microbiological parameters for identifying possible contamination sources, using specifickits by a designed crew member. More detailed periodic assessments should be under the responsibility ofspecialised personnel/laboratories and should be based on sample collection from all tanks and sites of waterdistribution. It is important to select a properly trained crew member on board for monitoring water quality.

  12. Changing patterns in water toxicity associated with current use pesticides in three California agriculture regions.

    PubMed

    Anderson, Brian S; Phillips, Bryn M; Voorhees, Jennifer P; Deng, Xin; Geraci, Jeff; Worcester, Karen; Tjeerdema, Ron S

    2018-03-01

    Regulation of agriculture irrigation water discharges in California, USA, is assessed and controlled by its 9 Regional Water Quality Control Boards under the jurisdiction of the California State Water Resources Control Board. Each Regional Water Board has developed programs to control pesticides in runoff as part of the waste discharge requirements implemented through each region's Irrigated Lands Regulatory Program. The present study assessed how pesticide use patterns differ in the Imperial (Imperial County) and the Salinas and Santa Maria (Monterey County) valleys, which host 3 of California's prime agriculture areas. Surface-water toxicity associated with current use pesticides was monitored at several sites in these areas in 2014 and 2015, and results were linked to changes in pesticide use patterns in these areas. Pesticide use patterns appeared to coincide with differences in the way agriculture programs were implemented by the 2 respective Regional Water Quality Control Boards, and these programs differed in the 2 Water Board Regions. Different pesticide use patterns affected the occurrence of pesticides in agriculture runoff, and this influenced toxicity test results. Greater detection frequency and higher concentrations of the organophosphate pesticide chlorpyrifos were detected in agriculture runoff in Imperial County compared to Monterey County, likely due to more rigorous monitoring requirements for growers using this pesticide in Monterey County. Monterey County agriculture runoff contained toxic concentrations of pyrethroid and neonicotinoid pesticides, which impacted amphipods (Hyalella azteca) and midge larvae (Chironomus dilutus) in toxicity tests. Study results illustrate how monitoring strategies need to evolve as regulatory actions affect change in pesticide use and demonstrate the importance of using toxicity test indicator species appropriate for the suite of contaminants in runoff in order to accurately assess environmental risk. Integr Environ Assess Manag 2018;14:270-281. © 2017 SETAC. © 2017 SETAC.

  13. Model-Based Control of an Aircraft Engine using an Optimal Tuner Approach

    NASA Technical Reports Server (NTRS)

    Connolly, Joseph W.; Chicatelli, Amy; Garg, Sanjay

    2012-01-01

    This paper covers the development of a model-based engine control (MBEC) method- ology applied to an aircraft turbofan engine. Here, a linear model extracted from the Commercial Modular Aero-Propulsion System Simulation 40,000 (CMAPSS40k) at a cruise operating point serves as the engine and the on-board model. The on-board model is up- dated using an optimal tuner Kalman Filter (OTKF) estimation routine, which enables the on-board model to self-tune to account for engine performance variations. The focus here is on developing a methodology for MBEC with direct control of estimated parameters of interest such as thrust and stall margins. MBEC provides the ability for a tighter control bound of thrust over the entire life cycle of the engine that is not achievable using traditional control feedback, which uses engine pressure ratio or fan speed. CMAPSS40k is capable of modeling realistic engine performance, allowing for a verification of the MBEC tighter thrust control. In addition, investigations of using the MBEC to provide a surge limit for the controller limit logic are presented that could provide benefits over a simple acceleration schedule that is currently used in engine control architectures.

  14. A wireless object location detector enabling people with developmental disabilities to control environmental stimulation through simple occupational activities with Nintendo Wii Balance Boards.

    PubMed

    Shih, Ching-Hsiang; Chang, Man-Ling

    2012-01-01

    The latest researches have adopted software technology, turning the Nintendo Wii Balance Board into a high performance standing location detector with a newly developed standing location detection program (SLDP). This study extended SLDP functionality to assess whether two people with developmental disabilities would be able to actively perform simple occupational activities by controlling their favorite environmental stimulation using Nintendo Wii Balance Boards and SLDP software. An ABAB design was adopted in this study to perform the tests. The test results showed that, during the intervention phases, both participants significantly increased their target response (i.e. simple occupational activity) to activate the control system to produce environmental stimulation. The practical and developmental implications of the findings are discussed. Copyright © 2012 Elsevier Ltd. All rights reserved.

  15. Proposal for massively parallel data storage system

    NASA Technical Reports Server (NTRS)

    Mansuripur, M.

    1992-01-01

    An architecture for integrating large numbers of data storage units (drives) to form a distributed mass storage system is proposed. The network of interconnected units consists of nodes and links. At each node there resides a controller board, a data storage unit and, possibly, a local/remote user-terminal. The links (twisted-pair wires, coax cables, or fiber-optic channels) provide the communications backbone of the network. There is no central controller for the system as a whole; all decisions regarding allocation of resources, routing of messages and data-blocks, creation and distribution of redundant data-blocks throughout the system (for protection against possible failures), frequency of backup operations, etc., are made locally at individual nodes. The system can handle as many user-terminals as there are nodes in the network. Various users compete for resources by sending their requests to the local controller-board and receiving allocations of time and storage space. In principle, each user can have access to the entire system, and all drives can be running in parallel to service the requests for one or more users. The system is expandable up to a maximum number of nodes, determined by the number of routing-buffers built into the controller boards. Additional drives, controller-boards, user-terminals, and links can be simply plugged into an existing system in order to expand its capacity.

  16. Interchangeable end effector tools utilized on the PFMA

    NASA Technical Reports Server (NTRS)

    Cody, Joe; Carroll, John; Crow, George; Gierow, Paul; Littles, Jay; Maness, Michael; Morrison, Jim

    1992-01-01

    An instrumented task board, used for measuring forces applied by the Protoflight Manipulator Arm (PFMA) to the task board, was fabricated and delivered to Marshall Space Flight Center. SRS Technologies phased out the existing IBM compatible data acquisition system, used with a instrumented task board, and integrated the force measuring electronic hardware in with the Macintosh II data acquisition system. The purpose of this change was to acquire all data with the same time tag, allowing easier and more accurate data reduction in addition to real-time graphics. A three-dimensional optical position sensing system for determining the location of the PFMA's end effect or in reference to the center of the instrumented task board was also designed and delivered under. An improved task board was fabricated which included an improved instrumented beam design. The modified design of the task board improved the force/torque measurement system by increasing the sensitivity, reliability, load range and ease of maintenance. A calibration panel for the optical position system was also designed and fabricated. The calibration method developed for the position sensors enhanced the performance of the sensors as well as simplified the installation and calibration procedures required. The modifications made under this effort expanded the capabilities of the task board system. The system developed determines the arm's position relative to the task board and measures the signals to the joints resulting from the operator's control signals in addition to the task board forces. The software and hardware required to calculate and record the position of the PFMA during the performance of tasks with the instrumented task board were defined, designed and delivered to MSFC. PFMA joint input signals can be measured from a breakout box to evaluate the sensitivity or response of the arm operation to control commands. The data processing system provides the capability for post processing of time-history graphics and plots of the PFMA positions, the operator's actions, and the PFMA servo reactions in addition to realtime force and position sensor data presentation.

  17. Interchangeable end effector tools utilized on the PFMA

    NASA Astrophysics Data System (ADS)

    Cody, Joe; Carroll, John; Crow, George; Gierow, Paul; Littles, Jay; Maness, Michael; Morrison, Jim

    1992-02-01

    An instrumented task board, used for measuring forces applied by the Protoflight Manipulator Arm (PFMA) to the task board, was fabricated and delivered to Marshall Space Flight Center. SRS Technologies phased out the existing IBM compatible data acquisition system, used with a instrumented task board, and integrated the force measuring electronic hardware in with the Macintosh II data acquisition system. The purpose of this change was to acquire all data with the same time tag, allowing easier and more accurate data reduction in addition to real-time graphics. A three-dimensional optical position sensing system for determining the location of the PFMA's end effect or in reference to the center of the instrumented task board was also designed and delivered under. An improved task board was fabricated which included an improved instrumented beam design. The modified design of the task board improved the force/torque measurement system by increasing the sensitivity, reliability, load range and ease of maintenance. A calibration panel for the optical position system was also designed and fabricated. The calibration method developed for the position sensors enhanced the performance of the sensors as well as simplified the installation and calibration procedures required. The modifications made under this effort expanded the capabilities of the task board system. The system developed determines the arm's position relative to the task board and measures the signals to the joints resulting from the operator's control signals in addition to the task board forces. The software and hardware required to calculate and record the position of the PFMA during the performance of tasks with the instrumented task board were defined, designed and delivered to MSFC. PFMA joint input signals can be measured from a breakout box to evaluate the sensitivity or response of the arm operation to control commands. The data processing system provides the capability for post processing of time-history graphics and plots of the PFMA positions, the operator's actions, and the PFMA servo reactions in addition to realtime force and position sensor data presentation.

  18. Microwave Temperature Profiler Mounted in a Standard Airborne Research Canister

    NASA Technical Reports Server (NTRS)

    Mahoney, Michael J.; Denning, Richard F.; Fox, Jack

    2009-01-01

    Many atmospheric research aircraft use a standard canister design to mount instruments, as this significantly facilitates their electrical and mechanical integration and thereby reduces cost. Based on more than 30 years of airborne science experience with the Microwave Temperature Profiler (MTP), the MTP has been repackaged with state-of-the-art electronics and other design improvements to fly in one of these standard canisters. All of the controlling electronics are integrated on a single 4 5-in. (.10 13- cm) multi-layer PCB (printed circuit board) with surface-mount hardware. Improved circuit design, including a self-calibrating RTD (resistive temperature detector) multiplexer, was implemented in order to reduce the size and mass of the electronics while providing increased capability. A new microcontroller-based temperature controller board was designed, providing better control with fewer components. Five such boards are used to provide local control of the temperature in various areas of the instrument, improving radiometric performance. The new stepper motor has an embedded controller eliminating the need for a separate controller board. The reference target is heated to avoid possible emissivity (and hence calibration) changes due to moisture contamination in humid environments, as well as avoiding issues with ambient targets during ascent and descent. The radiometer is a double-sideband heterodyne receiver tuned sequentially to individual oxygen emission lines near 60 GHz, with the line selection and intermediate frequency bandwidths chosen to accommodate the altitude range of the aircraft and mission.

  19. VPI - VIBRATION PATTERN IMAGER: A CONTROL AND DATA ACQUISITION SYSTEM FOR SCANNING LASER VIBROMETERS

    NASA Technical Reports Server (NTRS)

    Rizzi, S. A.

    1994-01-01

    The Vibration Pattern Imager (VPI) system was designed to control and acquire data from laser vibrometer sensors. The PC computer based system uses a digital signal processing (DSP) board and an analog I/O board to control the sensor and to process the data. The VPI system was originally developed for use with the Ometron VPI Sensor (Ometron Limited, Kelvin House, Worsley Bridge Road, London, SE26 5BX, England), but can be readily adapted to any commercially available sensor which provides an analog output signal and requires analog inputs for control of mirror positioning. VPI's graphical user interface allows the operation of the program to be controlled interactively through keyboard and mouse-selected menu options. The main menu controls all functions for setup, data acquisition, display, file operations, and exiting the program. Two types of data may be acquired with the VPI system: single point or "full field". In the single point mode, time series data is sampled by the A/D converter on the I/O board at a user-defined rate for the selected number of samples. The position of the measuring point, adjusted by mirrors in the sensor, is controlled via a mouse input. In the "full field" mode, the measurement point is moved over a user-selected rectangular area with up to 256 positions in both x and y directions. The time series data is sampled by the A/D converter on the I/O board and converted to a root-mean-square (rms) value by the DSP board. The rms "full field" velocity distribution is then uploaded for display and storage. VPI is written in C language and Texas Instruments' TMS320C30 assembly language for IBM PC series and compatible computers running MS-DOS. The program requires 640K of RAM for execution, and a hard disk with 10Mb or more of disk space is recommended. The program also requires a mouse, a VGA graphics display, a Four Channel analog I/O board (Spectrum Signal Processing, Inc.; Westborough, MA), a break-out box and a Spirit-30 board (Sonitech International, Inc.; Wellesley, MA) which includes a TMS320C30 DSP processor, 256Kb zero wait state SRAM, and a daughter board with 8Mb one wait state DRAM. Please contact COSMIC for additional information on required hardware and software. In order to compile the provided VPI source code, a Microsoft C version 6.0 compiler, a Texas Instruments' TMS320C30 assembly language compiler, and the Spirit 30 run time libraries are required. A math co-processor is highly recommended. A sample MS-DOS executable is provided on the distribution medium. The standard distribution medium for this program is one 5.25 inch 360K MS-DOS format diskette. The contents of the diskettes are compressed using the PKWARE archiving tools. The utility to unarchive the files, PKUNZIP.EXE, is included. VPI was developed in 1991-1992.

  20. Information Switching Processor (ISP) contention analysis and control

    NASA Technical Reports Server (NTRS)

    Inukai, Thomas

    1995-01-01

    In designing a satellite system with on-board processing, the selection of a switching architecture is often critical. The on-board switching function can be implemented by circuit switching or packet switching. Destination-directed packet switching has several attractive features, such as self-routing without on-board switch reconfiguration, no switch control memory requirement, efficient bandwidth utilization for packet switched traffic, and accommodation of circuit switched traffic. Destination-directed packet switching, however, has two potential concerns: (1) contention and (2) congestion. And this report specifically deals with the first problem. It includes a description and analysis of various self-routing switch structures, the nature of contention problems, and contention and resolution techniques.

  1. View northeast of model board representing northern portion of trackage ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View northeast of model board representing northern portion of trackage monitored by the Philadelphia poer directors center; free-standing cabinet at far right center of photograph is an early computer which supplanted operator control from Lamokin Tower in the 1980's; switchboard console #1 for controlling indicating lights is at lower right - Thirtieth Street Station, Power Director Center, Thirtieth & Market Streets in Amtrak Railroad Station, Philadelphia, Philadelphia County, PA

  2. Development of a hardware-in-loop attitude control simulator for a CubeSat satellite

    NASA Astrophysics Data System (ADS)

    Tapsawat, Wittawat; Sangpet, Teerawat; Kuntanapreeda, Suwat

    2018-01-01

    Attitude control is an important part in satellite on-orbit operation. It greatly affects the performance of satellites. Testing of an attitude determination and control subsystem (ADCS) is very challenging since it might require attitude dynamics and space environment in the orbit. This paper develops a low-cost hardware-in-loop (HIL) simulator for testing an ADCS of a CubeSat satellite. The simulator consists of a numerical simulation part, a hardware part, and a HIL interface hardware unit. The numerical simulation part includes orbital dynamics, attitude dynamics and Earth’s magnetic field. The hardware part is the real ADCS board of the satellite. The simulation part outputs satellite’s angular velocity and geomagnetic field information to the HIL interface hardware. Then, based on this information, the HIL interface hardware generates I2C signals mimicking the signals of the on-board rate-gyros and magnetometers and consequently outputs the signals to the ADCS board. The ADCS board reads the rate-gyro and magnetometer signals, calculates control signals, and drives the attitude actuators which are three magnetic torquers (MTQs). The responses of the MTQs sensed by a separated magnetometer are feedback to the numerical simulation part completing the HIL simulation loop. Experimental studies are conducted to demonstrate the feasibility and effectiveness of the simulator.

  3. Surveillance study of vector species on board passenger ships, Risk factors related to infestations

    PubMed Central

    Mouchtouri, Varvara A; Anagnostopoulou, Rimma; Samanidou-Voyadjoglou, Anna; Theodoridou, Kalliopi; Hatzoglou, Chrissi; Kremastinou, Jenny; Hadjichristodoulou, Christos

    2008-01-01

    Background Passenger ships provide conditions suitable for the survival and growth of pest populations. Arthropods and rodents can gain access directly from the ships' open spaces, can be carried in shiploads, or can be found on humans or animals as ectoparasites. Vectors on board ships may contaminate stored foods, transmit illness on board, or, introduce diseases in new areas. Pest species, ship areas facilitating infestations, and different risk factors related to infestations were identified in 21 ferries. Methods 486 traps for insects and rodents were placed in 21 ferries. Archives of Public Health Authorities were reviewed to identify complaints regarding the presence of pest species on board ferries from 1994 to 2004. A detail questionnaire was used to collect data on ship characteristics and pest control practices. Results Eighteen ferries were infested with flies (85.7%), 11 with cockroaches (52.3%), three with bedbugs, and one with fleas. Other species had been found on board were ants, spiders, butterflies, beetles, and a lizard. A total of 431 Blattella germanica species were captured in 28 (9.96%) traps, and 84.2% of them were nymphs. One ship was highly infested. Cockroach infestation was negatively associated with ferries in which Hazard Analysis Critical Control Point system was applied to ensure food safety on board (Relative Risk, RR = 0.23, p = 0.03), and positively associated with ferries in which cockroaches were observed by crew (RR = 4.09, p = 0.007), no cockroach monitoring log was kept (RR = 5.00, p = 0.02), and pesticide sprays for domestic use were applied by crew (RR = 4.00, p = 0.05). Cockroach infested ships had higher age (p = 0.03). Neither rats nor mice were found on any ship, but three ferries had been infested with a rodent in the past. Conclusion Integrated pest control programs should include continuing monitoring for a variety of pest species in different ship locations; pest control measures should be more persistent in older ships. HACCP system aids in the prevention of cockroach infestations on board. PMID:18371217

  4. Surveillance study of vector species on board passenger ships, risk factors related to infestations.

    PubMed

    Mouchtouri, Varvara A; Anagnostopoulou, Rimma; Samanidou-Voyadjoglou, Anna; Theodoridou, Kalliopi; Hatzoglou, Chrissi; Kremastinou, Jenny; Hadjichristodoulou, Christos

    2008-03-27

    Passenger ships provide conditions suitable for the survival and growth of pest populations. Arthropods and rodents can gain access directly from the ships' open spaces, can be carried in shiploads, or can be found on humans or animals as ectoparasites. Vectors on board ships may contaminate stored foods, transmit illness on board, or, introduce diseases in new areas. Pest species, ship areas facilitating infestations, and different risk factors related to infestations were identified in 21 ferries. 486 traps for insects and rodents were placed in 21 ferries. Archives of Public Health Authorities were reviewed to identify complaints regarding the presence of pest species on board ferries from 1994 to 2004. A detail questionnaire was used to collect data on ship characteristics and pest control practices. Eighteen ferries were infested with flies (85.7%), 11 with cockroaches (52.3%), three with bedbugs, and one with fleas. Other species had been found on board were ants, spiders, butterflies, beetles, and a lizard. A total of 431 Blattella germanica species were captured in 28 (9.96%) traps, and 84.2% of them were nymphs. One ship was highly infested. Cockroach infestation was negatively associated with ferries in which Hazard Analysis Critical Control Point system was applied to ensure food safety on board (Relative Risk, RR = 0.23, p = 0.03), and positively associated with ferries in which cockroaches were observed by crew (RR = 4.09, p = 0.007), no cockroach monitoring log was kept (RR = 5.00, p = 0.02), and pesticide sprays for domestic use were applied by crew (RR = 4.00, p = 0.05). Cockroach infested ships had higher age (p = 0.03). Neither rats nor mice were found on any ship, but three ferries had been infested with a rodent in the past. Integrated pest control programs should include continuing monitoring for a variety of pest species in different ship locations; pest control measures should be more persistent in older ships. HACCP system aids in the prevention of cockroach infestations on board.

  5. Testimony of Edwin Meese III, Attorney General and Chairman, National Drug Policy Board, before U.S. Senate Committee on the Judiciary, Regarding Coordination of National Drug Policy and Strategy.

    ERIC Educational Resources Information Center

    Department of Justice, Washington, DC.

    The testimony of the United States Attorney General which appears in this document concentrates on three areas: (1) the coordination of federal drug control efforts and the reorganization of the National Drug Policy Board; (2) the performance of the National Drug Policy Board; and (3) the Administration's views on the proposed "Drug…

  6. A Timer for Synchronous Digital Systems

    NASA Technical Reports Server (NTRS)

    McKenney, Elizabeth; Irwin, Philip

    2003-01-01

    The Real-Time Interferometer Control Systems Testbed (RICST) timing board is a VersaModule Eurocard (VME)-based board that can generate up to 16 simultaneous, phase-locked timing signals at a rate defined by the user. It can also generate all seven VME interrupt requests (IRQs). The RICST timing board is suitable mainly for robotic, aerospace, and real-time applications. Several circuit boards on the market are capable of generating periodic IRQs. Most are associated with Global Positioning System (GPS) receivers and Inter Range Instrumentation Group (IRIG) time-code generators, whereas this board uses either an internal VME clock or an externally generated clock signal to synchronize multiple components of the system. The primary advantage of this board is that there is no discernible jitter in the output clock waveforms because the signals are divided down from a high-frequency clock signal instead of being phase-locked from a lower frequency. The primary disadvantage to this board, relative to other periodic-IRQ-generating boards, is that it is more difficult to synchronize the system to wall clock time.

  7. Pattern Generator for Bench Test of Digital Boards

    NASA Technical Reports Server (NTRS)

    Berkun, Andrew C.; Chu, Anhua J.

    2012-01-01

    All efforts to develop electronic equipment reach a stage where they need a board test station for each board. The SMAP digital system consists of three board types that interact with each other using interfaces with critical timing. Each board needs to be tested individually before combining into the integrated digital electronics system. Each board needs critical timing signals from the others to be able to operate. A bench test system was developed to support test of each board. The test system produces all the outputs of the control and timing unit, and is delivered much earlier than the timing unit. Timing signals are treated as data. A large file is generated containing the state of every timing signal at any instant. This file is streamed out to an IO card, which is wired directly to the device-under-test (DUT) input pins. This provides a flexible test environment that can be adapted to any of the boards required to test in a standalone configuration. The problem of generating the critical timing signals is then transferred from a hardware problem to a software problem where it is more easily dealt with.

  8. Serving on Organizational Boards: What Nurses Need to Know

    PubMed

    Stalter, Ann M; Arms, Deborah

    2016-02-26

    If you have ever thought about serving on a board or being actively involved in meetings aimed at making policy decisions, but are not sure you have the knowledge, skills or abilities to serve competently, this article is for you! In this article, the authors describe six competencies needed by nurses who are serving on boards and/or policy committees so as to contribute in a productive manner. These competencies include a professional commitment to serving on a governing board; knowledge about board types, bylaws, and job descriptions; an understanding of standard business protocols, board member roles, and voting processes; a willingness to use principles for managing and leading effective and efficient board meetings; an appreciation for the ethical and legal processes for conducting meetings; and the ability to employ strategies for maintaining control during intense/uncivil situations. They also discuss strategies for demonstrating these competencies and describe personal responsibilities of board members. The authors conclude that a knowledge of these rules and standards is essential in order for nurses to assume leadership roles that will enhance the health of today’s and tomorrow’s societies.

  9. Hospital board effectiveness: relationships between governing board composition and hospital financial viability.

    PubMed Central

    Molinari, C; Morlock, L; Alexander, J; Lyles, C A

    1993-01-01

    OBJECTIVE. Two theories--agency and managerialism--are compared with respect to their usefulness in explaining the role of insiders on the hospital board: whether their participation enhances or impairs board financial decision making. DATA SOURCES/STUDY SETTING. The study used 1985 hospital financial and governing board data for a representative sample of acute care California hospitals. STUDY DESIGN. Relationships were examined cross-sectionally between the presence or absence of insiders on the board and measures of hospital financial viability while controlling for the organizational factors of system affiliation, ownership, size, region, and corporate restructuring. PRINCIPAL FINDINGS. Multiple regression analysis found significant relationships between insider (CEO, medical staff) participation and hospital viability. CONCLUSIONS. These results support the managerial theory of governance by suggesting that the CEO and medical staff provide informational advantages to the hospital governing board. However, the cross-sectional design points to the need for future longitudinal studies in order to sequence these relationships between insider participation and improved hospital viability. PMID:8344824

  10. A monitoring system based on electric vehicle three-stage wireless charging

    NASA Astrophysics Data System (ADS)

    Hei, T.; Liu, Z. Z.; Yang, Y.; Hongxing, CHEN; Zhou, B.; Zeng, H.

    2016-08-01

    An monitoring system for three-stage wireless charging was designed. The vehicle terminal contained the core board which was used for battery information collection and charging control and the power measurement and charging control core board was provided at the transmitting terminal which communicated with receiver by Bluetooth. A touch-screen display unit was designed based on MCGS (Monitor and Control Generated System) to simulate charging behavior and to debug the system conveniently. The practical application shown that the system could be stable and reliable, and had a favorable application foreground.

  11. Development of an Experimental Board in the Nanaosatellite CUBESAT3

    NASA Astrophysics Data System (ADS)

    Cresciucci, Laetitia

    realize a satellite platform designed based on the following requirement: CUBESAT is a cube, its size is 10x10x10 centimeters, its weight must be under 1kg and the power consumption of the whole satellite is limited to 1 Watt. The University of Arizona makes such satellites. Each side of the cube is covered with solar panels which supply the power by recharging NiCad batteries. This satellite platform is provided with a power board, witch managed the power of the solar panels, the level of the batteries and the power needed by the others boards of the satellite. In addition to this power board, the CUBESAT platform includes a controller board. The controller used is the Microchip PIC 16C77. It acquires the data for the different sensors of the satellite (temperature, battery current level, power supplied by the solar panel) and manages the communication between the different boards. This communication uses a serial bus based on the I2C communication protocol. The last board on the CUBESAT platform is the transmission board. CUBESAT can be remote controlled by a ground station, and it have to send its data to this station periodically. The transmission board includes an emitter/receiver part designed by Motorola. The wavelength used for this transmission is the amature radio band, so anyone can listen to the satellite, but a key is necessary to decode the data. a non-expensive satellite which is very interesting for experimental missions. Alcatel Space Industries bought a CUBESAT to launch a radiation experiment in orbit, and turned to the Center of Micro-opto-electronics of Montpellier (CEM2) to define and realize this experience. I, Laetitia Cresciucci, and my partner, Didier Campillo, have been contacted by the CEM2 during our final year at the Engineers Science Institute of Montpellier (ISIM), in order to work on this project. The mission chosen for the CUBESAT's payload is to measure the degradation of three components in space. is a multi-goal mission. The first component studied is an analog to digital converter, the AD670. It has been choose by Alcatel because it is used on a satellite and doesn't work properly. Many tests have been performed to determine why this component fails, and CUBESAT is the experience which can prove if those ground results correspond to the results we will obtain during the flight. The two other components on the board are a mosfet transistor, the IRF450, and an optocoupler, the SFH610A. These devices have been studied in the CEM2 with a new space degradation prediction method called the Isochronal Annealing. With CUBESAT, the CEM2 wants to show that the results obtained with this method are reliable. In order to prove that the results match the predictions, we had to include a dosimeter, which measure the amount of radiation received and a temperature sensor. If this is a success, this method could be recognized by the aerospace industry. conception. After this prototype was done, we were asked to make a space qualified board, which included the study of the environment for CUBESAT's orbit (650 km, 65° inclination),as well as the thermal study in order to justify the choices of the components which measure the degradation of the 3 devices under test. Most parts had to undergo testing to prove their reliability when exposed to space radiations. The final payload board includes the different measurements' electronics and a microcontroller that controls the tests, collects the data and communicate with the platform. The last part of our work was to perform the integration of the payload board in the CUBESAT structure. This included solving mechanical problems and programming the communication interface between our board and the satellite's control board. We spent two weeks in Arizona working on this integration, in collaboration with the American students involved in this project. Now the payload design is complete, CUBESAT is ready to fly.

  12. Synchronized operation by field programmable gate array based signal controller for the Thomson scattering diagnostic system in KSTAR.

    PubMed

    Lee, W R; Kim, H S; Park, M K; Lee, J H; Kim, K H

    2012-09-01

    The Thomson scattering diagnostic system is successfully installed in the Korea Superconducting Tokamak Advanced Research (KSTAR) facility. We got the electron temperature and electron density data for the first time in 2011, 4th campaign using a field programmable gate array (FPGA) based signal control board. It operates as a signal generator, a detector, a controller, and a time measuring device. This board produces two configurable trigger pulses to operate Nd:YAG laser system and receives a laser beam detection signal from a photodiode detector. It allows a trigger pulse to be delivered to a time delay module to make a scattered signal measurement, measuring an asynchronous time value between the KSTAR timing board and the laser system injection signal. All functions are controlled by the embedded processor running on operating system within a single FPGA. It provides Ethernet communication interface and is configured with standard middleware to integrate with KSTAR. This controller has operated for two experimental campaigns including commissioning and performed the reconfiguration of logic designs to accommodate varying experimental situation without hardware rebuilding.

  13. Model-Based Control of a Nonlinear Aircraft Engine Simulation using an Optimal Tuner Kalman Filter Approach

    NASA Technical Reports Server (NTRS)

    Connolly, Joseph W.; Csank, Jeffrey Thomas; Chicatelli, Amy; Kilver, Jacob

    2013-01-01

    This paper covers the development of a model-based engine control (MBEC) methodology featuring a self tuning on-board model applied to an aircraft turbofan engine simulation. Here, the Commercial Modular Aero-Propulsion System Simulation 40,000 (CMAPSS40k) serves as the MBEC application engine. CMAPSS40k is capable of modeling realistic engine performance, allowing for a verification of the MBEC over a wide range of operating points. The on-board model is a piece-wise linear model derived from CMAPSS40k and updated using an optimal tuner Kalman Filter (OTKF) estimation routine, which enables the on-board model to self-tune to account for engine performance variations. The focus here is on developing a methodology for MBEC with direct control of estimated parameters of interest such as thrust and stall margins. Investigations using the MBEC to provide a stall margin limit for the controller protection logic are presented that could provide benefits over a simple acceleration schedule that is currently used in traditional engine control architectures.

  14. Notification: FY 2012 Management Challenges and Internal Control Weaknesses for the Chemical Safety and Hazard Investigation Board

    EPA Pesticide Factsheets

    February 1, 2012. The EPA Office of Inspector General is beginning work to update our list of areas we consider to be the key management challenges confronting the Chemical Safety and Hazard Investigation Board.

  15. 12 CFR 225.64 - Minimum appraisal standards.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ....64 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM BANK HOLDING COMPANIES AND CHANGE IN BANK CONTROL (REGULATION Y) Regulations Appraisal Standards... Board of the Appraisal Foundation, 1029 Vermont Ave., NW., Washington, DC 20005, unless principles of...

  16. 78 FR 51266 - International Security Advisory Board (ISAB) Meeting Notice

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-20

    ... DEPARTMENT OF STATE [Public Notice 8419] International Security Advisory Board (ISAB) Meeting.... App Sec. 10(a)(2), the Department of State announces a meeting of the International Security Advisory... all aspects of arms control, disarmament, political-military affairs, international security and...

  17. 76 FR 11781 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-03

    ..., Merritt Island, Florida; to retain voting shares of Sunrise Bank, Cocoa Beach, Florida. Board of Governors of the Federal Reserve System, February 25, 2011. Jennifer J. Johnson, Secretary of the Board. [FR...

  18. 49 CFR 831.9 - Authority of Board representatives.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Authority of Board representatives. 831.9 Section 831.9 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL TRANSPORTATION... Government agency, or person having possession or control of any transportation vehicle or component thereof...

  19. A study on the real-time reliability of on-board equipment of train control system

    NASA Astrophysics Data System (ADS)

    Zhang, Yong; Li, Shiwei

    2018-05-01

    Real-time reliability evaluation is conducive to establishing a condition based maintenance system for the purpose of guaranteeing continuous train operation. According to the inherent characteristics of the on-board equipment, the connotation of reliability evaluation of on-board equipment is defined and the evaluation index of real-time reliability is provided in this paper. From the perspective of methodology and practical application, the real-time reliability of the on-board equipment is discussed in detail, and the method of evaluating the realtime reliability of on-board equipment at component level based on Hidden Markov Model (HMM) is proposed. In this method the performance degradation data is used directly to realize the accurate perception of the hidden state transition process of on-board equipment, which can achieve a better description of the real-time reliability of the equipment.

  20. Characterization of CNRS Fizeau wedge laser tuner

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    A fringe detection and measurement system was constructed for use with the CNRS Fizeau wedge laser tuner, consisting of three circuit boards. The first board is a standard Reticon RC-100 B motherboard which is used to provide the timing, video processing, and housekeeping functions required by the Reticon RL-512 G photodiode array used in the system. The sampled and held video signal from the motherboard is processed by a second, custom-fabricated circuit board which contains a high-speed fringe detection and locating circuit. This board includes a dc level-discriminator-type fringe detector, a counter circuit to determine fringe center, a pulsed lasermore » triggering circuit, and a control circuit to operate the shutter for the He-Ne reference laser beam. The fringe center information is supplied to the third board, a commercial single board computer, which governs the data-collection process and interprets the results.« less

  1. An Educational Board Game to Assist PharmD Students in Learning Autonomic Nervous System Pharmacology.

    PubMed

    Jones, J Shawn; Tincher, Lindsay; Odeng-Otu, Emmanuel; Herdman, Michelle

    2015-10-25

    Objective. To examine whether playing a board game can assist PharmD students in learning autonomic nervous system (ANS) pharmacology. Design. Of 72 students enrolled in a required second-year pharmacology course, 22 students volunteered to play the board game, which was followed by an in-class examination consisting of 42 ANS questions (ANSQs) and 8 control questions (CTLQs). Participants were given a pretest and a posttest to assess immediate educational improvement. Participants' scores for pretest, posttest, in-class examination, and ANSQs were compared. Also, scores for examination, ANSQs, and CTLQs were compared between board game participants (PART) and nonparticipating classmates (NPART). Assessment. Board game participants scored progressively higher between the pretest, posttest, examination, and ANSQs. Additionally, PART scores were higher than NPART scores for examination and ANSQs. Difference between PART and NPART CTLQ scores was not significant. Conclusion. A board game can assist PharmD students in learning ANS pharmacology.

  2. Characterization of CNRS Fizeau wedge laser tuner

    NASA Technical Reports Server (NTRS)

    1984-01-01

    A fringe detection and measurement system was constructed for use with the CNRS Fizeau wedge laser tuner, consisting of three circuit boards. The first board is a standard Reticon RC-100 B motherboard which is used to provide the timing, video processing, and housekeeping functions required by the Reticon RL-512 G photodiode array used in the system. The sampled and held video signal from the motherboard is processed by a second, custom fabricated circuit board which contains a high speed fringe detection and locating circuit. This board includes a dc level discriminator type fringe detector, a counter circuit to determine fringe center, a pulsed laser triggering circuit, and a control circuit to operate the shutter for the He-Ne reference laser beam. The fringe center information is supplied to the third board, a commercial single board computer, which governs the data collection process and interprets the results.

  3. A Case Study Investigation into Creating a Joint Physical Evaluation Board

    DTIC Science & Technology

    2011-04-01

    technologies with the purpose of broadening the use of telecommuting for all PDBR members. Medical professionals are a critical asset to this work...Services to relinquish power and control , even with the promise of equal 24 contribution. This is especially true when it comes to making... control of the fit/unfit decision from the individual Service. There were a number of reasons voiced for this concern. Primarily, board members

  4. The Politics of Defence Budgeting: A Study of Organisation and Resource Allocation in the United Kingdom and the United States,

    DTIC Science & Technology

    1983-01-01

    fourth responsible for guided weapons and electronics across-the-board. Each controller would be an accounting officer directly responsible to... electronics . Thereafter, as Hastie Smith says, "the identification of the systems controllers with their Service boards [the committees corporately...COMM. COMD. ASST SECDEF CNTR & INTEL) (HEALTH AFFAIRS) ASST TO THE SECDEF (ATOMIC ENERGY ) R DEFENSE LLIGENCE SE AGENCIES DEESEDFES)EFENSE DEFENSE

  5. Testing of the on-board attitude determination and control algorithms for SAMPEX

    NASA Technical Reports Server (NTRS)

    Mccullough, Jon D.; Flatley, Thomas W.; Henretty, Debra A.; Markley, F. Landis; San, Josephine K.

    1993-01-01

    Algorithms for on-board attitude determination and control of the Solar, Anomalous, and Magnetospheric Particle Explorer (SAMPEX) have been expanded to include a constant gain Kalman filter for the spacecraft angular momentum, pulse width modulation for the reaction wheel command, an algorithm to avoid pointing the Heavy Ion Large Telescope (HILT) instrument boresight along the spacecraft velocity vector, and the addition of digital sun sensor (DSS) failure detection logic. These improved algorithms were tested in a closed-loop environment for three orbit geometries, one with the sun perpendicular to the orbit plane, and two with the sun near the orbit plane - at Autumnal Equinox and at Winter Solstice. The closed-loop simulator was enhanced and used as a truth model for the control systems' performance evaluation and sensor/actuator contingency analysis. The simulations were performed on a VAX 8830 using a prototype version of the on-board software.

  6. Nuclear Warheads: The Reliable Replacement Warhead program and the Life Extension Program

    DTIC Science & Technology

    2007-12-03

    eliminate the need for ESD controls.”67 CRS-22 68 The Defense Nuclear Facilities Safety Board was created by Congress 1988 “as an independent oversight...public health and safety’ at DOE’s defense nuclear facilities .” U.S. Defense Nuclear Facilities Safety Board. “Who We Are,” at [http://www.dnfsb.gov...about/index.html]. 69 Personal communication, Kent Fortenberry, Technical Director, Defense Nuclear Facilities Safety Board, September 14, 2006. 70

  7. Defense Science Board Task Force Report on Defense Strategies for Ensuring the Resilience of National Space Capabilities

    DTIC Science & Technology

    2017-03-01

    Executive Summary is a product of the Defense Science Board (DSB). The DSB is a Federal Advisory Committee established to provide independent advice to the...Executive Summary Since 2000, when the Defense Science Board concluded space superiority was absolutely essential in achieving global awareness, information...control, critical enabling doctrine, and policy concepts. From April 2015 through September 2016, the Task Force received more than 40 briefings from

  8. 12 CFR 652.60 - Corporation board guidelines.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    .... (a) Your board of directors is responsible for ensuring that you maintain total capital at a level... developing the capital adequacy plan: (1) Capability of management; (2) Strategies and objectives in your business plan; (3) Quality of operating policies, procedures, and internal controls; (4) Quality and...

  9. 30 CFR 301.1 - Cross reference.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... within the jurisdiction of administrative law judges and the Interior Board of Surface Mining and... Resources BOARD OF SURFACE MINING AND RECLAMATION APPEALS, DEPARTMENT OF THE INTERIOR PROCEDURES UNDER SURFACE MINING CONTROL AND RECLAMATION ACT OF 1977 § 301.1 Cross reference. For special rules applicable...

  10. 12 CFR 615.5174 - Farmer Mac securities.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ...(f). (b) Board and management responsibilities. Your board of directors must adopt written policies... personnel or committees must state the extent of management's authority and responsibilities for managing... internal controls are in place to prevent loss, in accordance with § 615.5133(e). Management must submit...

  11. 12 CFR 615.5174 - Farmer Mac securities.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ...(f). (b) Board and management responsibilities. Your board of directors must adopt written policies... personnel or committees must state the extent of management's authority and responsibilities for managing... internal controls are in place to prevent loss, in accordance with § 615.5133(e). Management must submit...

  12. 12 CFR 615.5174 - Farmer Mac securities.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ...(f). (b) Board and management responsibilities. Your board of directors must adopt written policies... personnel or committees must state the extent of management's authority and responsibilities for managing... internal controls are in place to prevent loss, in accordance with § 615.5133(e). Management must submit...

  13. 12 CFR 615.5174 - Farmer Mac securities.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    .... (b) Board and management responsibilities. Your board of directors must adopt written policies that... personnel or committees must state the extent of management's authority and responsibilities for managing... internal controls are in place to prevent loss, in accordance with § 615.5133(e). Management must submit...

  14. 12 CFR 615.5174 - Farmer Mac securities.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ...(f). (b) Board and management responsibilities. Your board of directors must adopt written policies... personnel or committees must state the extent of management's authority and responsibilities for managing... internal controls are in place to prevent loss, in accordance with § 615.5133(e). Management must submit...

  15. 75 FR 9475 - Notice and Request for Comments

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-02

    ... designations change. The Board uses this information to facilitate reasoned decision making. In addition, this... Regulatory Affairs, Attention: Chandana Achanta, Surface Transportation Board Desk Officer, by fax at (202... Proceedings. OMB Control Number: 2140-0008. Form Number: None. Type of Review: Extension without change...

  16. 12 CFR 652.60 - Corporation board guidelines.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    .... (a) Your board of directors is responsible for ensuring that you maintain total capital at a level... developing the capital adequacy plan: (1) Capability of management; (2) Strategies and objectives in your business plan; (3) Quality of operating policies, procedures, and internal controls; (4) Quality and...

  17. 42 CFR 456.716 - DUR Board.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 4 2012-10-01 2012-10-01 false DUR Board. 456.716 Section 456.716 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS UTILIZATION CONTROL Drug Use Review (DUR) Program and Electronic Claims Management System...

  18. 42 CFR 456.716 - DUR Board.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 4 2014-10-01 2014-10-01 false DUR Board. 456.716 Section 456.716 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS UTILIZATION CONTROL Drug Use Review (DUR) Program and Electronic Claims Management System...

  19. Notification: Key Management Challenges Confronting the U.S. Chemical Safety and Hazard Investigation Board - FY2016

    EPA Pesticide Factsheets

    January 21, 2016. The EPA OIG is beginning work to update for fiscal year 2016 its list of proposed key management challenges and internal control weaknesses confronting the U.S. Chemical Safety and Hazard Investigation Board (CSB).

  20. A design approach for small vision-based autonomous vehicles

    NASA Astrophysics Data System (ADS)

    Edwards, Barrett B.; Fife, Wade S.; Archibald, James K.; Lee, Dah-Jye; Wilde, Doran K.

    2006-10-01

    This paper describes the design of a small autonomous vehicle based on the Helios computing platform, a custom FPGA-based board capable of supporting on-board vision. Target applications for the Helios computing platform are those that require lightweight equipment and low power consumption. To demonstrate the capabilities of FPGAs in real-time control of autonomous vehicles, a 16 inch long R/C monster truck was outfitted with a Helios board. The platform provided by such a small vehicle is ideal for testing and development. The proof of concept application for this autonomous vehicle was a timed race through an environment with obstacles. Given the size restrictions of the vehicle and its operating environment, the only feasible on-board sensor is a small CMOS camera. The single video feed is therefore the only source of information from the surrounding environment. The image is then segmented and processed by custom logic in the FPGA that also controls direction and speed of the vehicle based on visual input.

  1. Evaluation of a Localized Treatment Technique Using Three Ready-to-Use Products Against the Drywood Termite Incisitermes snyderi (Kalotermitidae) in Naturally Infested Lumber

    PubMed Central

    Hickman, Robert; Forschler, Brian T.

    2012-01-01

    Twenty-one boards infested with drywood termites were examined for activity using a Termatrac® motion detector. Termite galleries were identified using a Resistograph drill and treated with one of three ready-to-use (RTU) products. Results indicated that the Termatrac was excellent at locating termite activity but provided 9.5% false negatives. The Resistograph located termite galleries with an average of 4.6 ± 2.7 holes drilled to find at least one gallery in a board. Treatments included three formulations and two active ingredients; a foam (imidacloprid), a dry (fipronil) and an experimental formulation in a pressurized can (fipronil). All treatments provided evidence for a reduction in mean termite populations per board compared to the control. Two treatments provided evidence of elimination of infestation but no formulation eliminated infestations in every board that was treated. The concept of local treatment for drywood termite control is discussed relative to our results. PMID:26467947

  2. The OPERA muon spectrometer tracking electronics

    NASA Astrophysics Data System (ADS)

    Ambrosio, M.; Barichello, G.; Brugnera, R.; Carrara, E.; Consiglio, L.; Corradi, A.; Dal Corso, F.; Dusini, S.; Felici, G.; Garfagnini, A.; Manea, C.; Masone, V.; Paoloni, A.; Paoluzzi, G.; Papalino, G.; Parascandolo, P.; Sorrentino, G.; Spinetti, M.; Stanco, L.; Terranova, F.; Votano, L.

    2004-11-01

    The document describes the front-end electronics that instrument the spectrometer of the OPERA experiment. The spectrometer is made of two separate modules. Each module consists of 22 RPC planes equipped with horizontal and vertical strips readout for a total amount of about 25,000 digital channels. The front end electronics is self-triggered and has single plane readout capability. It is made of three different stages: the Front End Boards (FEBs) system, the Controller Boards (CBs) system and the Timing Boards (TBs) system. The FEB system provides discrimination of the strip incoming signals; a FAST OR output of the input signals is also available for trigger plane signal generation. FEBs discriminated signals are acquired by the CBs system that manages also the communication to the experiment DAQ and Slow Control interface. A Trigger Board allows to operate in both self-trigger (the FEB FAST OR signal starts the plane acquisition) or external-trigger (different conditions can be set on the OR signals generated from different planes) modes.

  3. Development of a beam test telescope based on the Alibava readout system

    NASA Astrophysics Data System (ADS)

    Marco-Hernández, R.

    2011-01-01

    A telescope for a beam test have been developed as a result of a collaboration among the University of Liverpool, Centro Nacional de Microelectrónica (CNM) of Barcelona and Instituto de Física Corpuscular (IFIC) of Valencia. This system is intended to carry out both analogue charge collection and spatial resolution measurements with different types of microstrip or pixel silicon detectors in a beam test environment. The telescope has four XY measurement as well as trigger planes (XYT board) and it can accommodate up to twelve devices under test (DUT board). The DUT board uses two Beetle ASICs for the readout of chilled silicon detectors. The board could operate in a self-triggering mode. The board features a temperature sensor and it can be mounted on a rotary stage. A peltier element is used for cooling the DUT. Each XYT board measures the track space points using two silicon strip detectors connected to two Beetle ASICs. It can also trigger on the particle tracks in the beam test. The board includes a CPLD which allows for the synchronization of the trigger signal to a common clock frequency, delaying and implementing coincidence with other XYT boards. An Alibava mother board is used to read out and to control each XYT/DUT board from a common trigger signal and a common clock signal. The Alibava board has a TDC on board to have a time stamp of each trigger. The data collected by each Alibava board is sent to a master card by means of a local data/address bus following a custom digital protocol. The master board distributes the trigger, clock and reset signals. It also merges the data streams from up to sixteen Alibava boards. The board has also a test channel for testing in a standard mode a XYT or DUT board. This board is implemented with a Xilinx development board and a custom patch board. The master board is connected with the DAQ software via 100M Ethernet. Track based alignment software has also been developed for the data obtained with the DAQ software.

  4. Circuit board routing attachment for Fermilab Gerber plotter

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lindenmeyer, C.

    1984-05-10

    A new and potentially important method of producing large circuit boards has been developed at Fermilab. A Gerber Flat Bed Plotter with an active area of 5' x 16' has been fitted with a machining head to produce a circuit board without the use of photography or chemicals. The modifications of the Gerber Plotter do not impair its use as a photoplotter or pen plotter, the machining head is merely exchanged with the standard attachments. The modifications to the program are minimal; this will be described in another report. The machining head is fitted with an air bearing motorized spindlemore » driven at a speed of 40,000 rpm to 90,000 rpm. The spindle also is provided with air bearings on its outside diameter, offering frictionless vertical travel guidance. Vertical travel of the spindle is driven by a spring return single acting air cylinder. An adjustable hydraulic damper slows the spindle travel near the end of its downward stroke. Two programmable stops control spindle down stroke position, and limit switches are provided for position feedback to the control system. A vacuum system collects chips at the cutter head. No lubrication or regular maintenance is required. The circuit board to be fabricated is supported on a porous plastic mat which allows table vacuum to hold the board in place while allowing the cutters or drills to cut through the board without damaging the rubber platen of the plotter. The perimeter of the board must be covered to the limits of the table vacuum area used to prevent excessive leakage.« less

  5. The SAX Italian scientific satellite. The on-board implemented automation as a support to the ground control capability

    NASA Technical Reports Server (NTRS)

    Martelli, Andrea

    1994-01-01

    This paper presents the capabilities implemented in the SAX system for an efficient operations management during its in-flight mission. SAX is an Italian scientific satellite for x-ray astronomy whose major mission objectives impose quite tight constraints on the implementation of both the space and ground segment. The most relevant mission characteristics require an operative lifetime of two years, performing scientific observations both in contact and in noncontact periods, with a low equatorial orbit supported by one ground station, so that only a few minutes of communications are available each orbit. This operational scenario determines the need to have a satellite capable of performing the scheduled mission automatically and reacting autonomously to contingency situations. The implementation approach of the on-board operations management, through which the necessary automation and autonomy are achieved, follows a hierarchical structure. This has been achieved adopting a distributed avionic architecture. Nine different on-board computers, in fact, constitute the on-board data management system. Each of them performs the local control and monitors its own functions while the system level control is performed at a higher level by the data handling applications software. The SAX on-board architecture provides the ground operators with different options of intervention by three classes of telecommands. The management of the scientific operations will be scheduled by the operation control center via dedicated operating plans. The SAX satellite flight mode is presently being integrated at Alenia Spazio premises in Turin for a launch scheduled for the end of 1995. Once in orbit, the SAX satellite will be subject to intensive check-out activities in order to verify the required mission performances. An overview of the envisaged procedure and of the necessary on-ground activities is therefore depicted as well.

  6. Humidity Control in the U.S. Air Force Aircraft Service Shelter

    DTIC Science & Technology

    1988-06-30

    printed circuit board control module , terminal boards, and blowt.r, etc.) are off-the-shelf commercial components. Only the humidifier ho:;Ift, I...indication of the shelter RH. - Circuit Breaker: A 20 amp, three pole breaker is providud fur equipment protection. o Water Storage Tank. A stainless...tapped into the shelter’s existing electrical system at the panelboard, on the load side of the 100 Amp main AC circuit breaker. Power is then

  7. Direct Digital Boiler Control Systems for the Navy Small Boiler Equipment.

    DTIC Science & Technology

    1983-02-01

    Hardware. Each full-size ACU a 6 caculation modules 30 arrme, modufes sation for dead time lag contains input/output circuit a 16 control mo uies a...along with lather modules of the DCS-1000 family. ’The complete instrument consists of plug-in circuit boards that allow easy Teplacement of a...Maintenance-Most systems indicate trouble areas with diagnostic routines or integral LED indicators so that circuit boards can be replaced to correct

  8. DSS 13 Microprocessor Antenna Controller

    NASA Technical Reports Server (NTRS)

    Gosline, R. M.

    1984-01-01

    A microprocessor based antenna controller system developed as part of the unattended station project for DSS 13 is described. Both the hardware and software top level designs are presented and the major problems encounted are discussed. Developments useful to related projects include a JPL standard 15 line interface using a single board computer, a general purpose parser, a fast floating point to ASCII conversion technique, and experience gained in using off board floating point processors with the 8080 CPU.

  9. Army Training Study: Training Effectiveness Analysis (TEA) Summary. Volume 4. Ordnance, Signal, CAMMS (Computer Assisted Map Maneuver System).

    DTIC Science & Technology

    1978-08-08

    learning can be reinforced on the job because individuals at all aptitude and experience levels investigated have the ability to be successful ...both game board and brigade controllers provided realistic feedback and guidance to the command group players . A second major function of the brigade...and experimental measures. The brigade level data collectors and game board players were controllers provided by the participating units’ parent

  10. CanOpen on RASTA: The Integration of the CanOpen IP Core in the Avionics Testbed

    NASA Astrophysics Data System (ADS)

    Furano, Gianluca; Guettache, Farid; Magistrati, Giorgio; Tiotto, Gabriele; Ortega, Carlos Urbina; Valverde, Alberto

    2013-08-01

    This paper presents the work done within the ESA Estec Data Systems Division, targeting the integration of the CanOpen IP Core with the existing Reference Architecture Test-bed for Avionics (RASTA). RASTA is the reference testbed system of the ESA Avionics Lab, designed to integrate the main elements of a typical Data Handling system. It aims at simulating a scenario where a Mission Control Center communicates with on-board computers and systems through a TM/TC link, thus providing the data management through qualified processors and interfaces such as Leon2 core processors, CAN bus controllers, MIL-STD-1553 and SpaceWire. This activity aims at the extension of the RASTA with two boards equipped with HurriCANe controller, acting as CANOpen slaves. CANOpen software modules have been ported on the RASTA system I/O boards equipped with Gaisler GR-CAN controller and acts as master communicating with the CCIPC boards. CanOpen serves as upper application layer for based on CAN defined within the CAN-in-Automation standard and can be regarded as the definitive standard for the implementation of CAN-based systems solutions. The development and integration of CCIPC performed by SITAEL S.p.A., is the first application that aims to bring the CANOpen standard for space applications. The definition of CANOpen within the European Cooperation for Space Standardization (ECSS) is under development.

  11. 78 FR 59930 - Agency Information Collection Activities: Announcement of Board Approval Under Delegated...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-30

    ... $50 billion in total assets and nonbank systemically important financial institutions, subject to annual supervisory stress tests and semi- annual company-run stress tests; ``other financial companies... Board informed as to--(i) its financial condition, [and] systems for monitoring and controlling...

  12. 44 CFR 150.5 - Joint Public Safety Awards Board.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Joint Public Safety Awards Board. 150.5 Section 150.5 Emergency Management and Assistance FEDERAL EMERGENCY MANAGEMENT AGENCY, DEPARTMENT OF HOMELAND SECURITY FIRE PREVENTION AND CONTROL PUBLIC SAFETY AWARDS TO PUBLIC SAFETY OFFICERS...

  13. 78 FR 17411 - Board of Scientific Counselors, National Center for Health Statistics

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-21

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, National Center for Health Statistics In accordance with section 10(a)(2) of the...), National Center for Health Statistics (NCHS) announces the following meeting of the aforementioned...

  14. 78 FR 48438 - Board of Scientific Counselors, National Center for Health Statistics

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-08

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, National Center for Health Statistics In accordance with section 10(a)(2) of the...), National Center for Health Statistics (NCHS) announces the following meeting of the aforementioned...

  15. A Hypertext-Based Computer Architecture for Management of the Joint Command, Control and Communications Curriculum

    DTIC Science & Technology

    1992-06-01

    Boards) Security, Privacy, and Freedom of Speech Issues 4.1.2 Understand the relationships between information processing and collection and...to-many (Mailing and discussion Lists) ... Many-to-Many (Bulletin Boards) Security, Privacy, and Freedom of Speech Issues 69 4.1.3 Understand the...Communication one-to-one (e-mail) °o° one-to-many (Mailing and discussion Lists) ... Many-to-Many (Bulletin Boards) oo Security, Privacy, and Freedom of Speech Issues

  16. On-Board Mining in the Sensor Web

    NASA Astrophysics Data System (ADS)

    Tanner, S.; Conover, H.; Graves, S.; Ramachandran, R.; Rushing, J.

    2004-12-01

    On-board data mining can contribute to many research and engineering applications, including natural hazard detection and prediction, intelligent sensor control, and the generation of customized data products for direct distribution to users. The ability to mine sensor data in real time can also be a critical component of autonomous operations, supporting deep space missions, unmanned aerial and ground-based vehicles (UAVs, UGVs), and a wide range of sensor meshes, webs and grids. On-board processing is expected to play a significant role in the next generation of NASA, Homeland Security, Department of Defense and civilian programs, providing for greater flexibility and versatility in measurements of physical systems. In addition, the use of UAV and UGV systems is increasing in military, emergency response and industrial applications. As research into the autonomy of these vehicles progresses, especially in fleet or web configurations, the applicability of on-board data mining is expected to increase significantly. Data mining in real time on board sensor platforms presents unique challenges. Most notably, the data to be mined is a continuous stream, rather than a fixed store such as a database. This means that the data mining algorithms must be modified to make only a single pass through the data. In addition, the on-board environment requires real time processing with limited computing resources, thus the algorithms must use fixed and relatively small amounts of processing time and memory. The University of Alabama in Huntsville is developing an innovative processing framework for the on-board data and information environment. The Environment for On-Board Processing (EVE) and the Adaptive On-board Data Processing (AODP) projects serve as proofs-of-concept of advanced information systems for remote sensing platforms. The EVE real-time processing infrastructure will upload, schedule and control the execution of processing plans on board remote sensors. These plans provide capabilities for autonomous data mining, classification and feature extraction using both streaming and buffered data sources. A ground-based testbed provides a heterogeneous, embedded hardware and software environment representing both space-based and ground-based sensor platforms, including wireless sensor mesh architectures. The AODP project explores the EVE concepts in the world of sensor-networks, including ad-hoc networks of small sensor platforms.

  17. A portable telescope based on the ALIBAVA system for test beam studies

    NASA Astrophysics Data System (ADS)

    Bernabeu, J.; Casse, G.; Garcia, C.; Greenall, A.; Lacasta, C.; Lozano, M.; Marti-Garcia, S.; Pellegrini, G.; Rodriguez, J.; Ullan, M.; Tsurin, I.

    2013-12-01

    A test beam telescope has been built using the ALIBAVA system to drive its data acquisition. The basic telescope planes consist of four XYT stations. Each station is built from a detector board with two strip sensors, mounted one in each side (strips crossing at 90°). The ensemble is coupled to an ALIBAVA daughter board. These stations act as reference frame and allow a precise track reconstruction. The system is triggered by the coincidence signal of the two scintillators located up and down stream. The telescope can hold several devices under tests. Each ALIBAVA daughter board is linked to its corresponding mother board. The system can hold up to 16 mother boards. A master board synchronizes and controls all the mother boards and collects their data. The off-line analysis software has been developed to study the charge collection, cluster width, tracking efficiency, resolution, etc., of the devices under test. Moreover, the built-in ALIBAVA TDC allows the analysis of the time profile of the device signal. The ALIBAVA telescope has been successfully operated in two test runs at the DESY and CERN-SPS beam lines.

  18. 76 FR 76416 - Board of Scientific Counselors, Office of Public Health Preparedness and Response (BSC, OPHPR)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-07

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Public Health Preparedness and Response (BSC, OPHPR) In accordance with..., Office of Public Health Preparedness and Response (OPHPR), concerning strategies and goals for the...

  19. 77 FR 20823 - Board of Scientific Counselors, Office of Public Health Preparedness and Response (BSC, OPHPR)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-06

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Public Health Preparedness and Response (BSC, OPHPR) In accordance with... Public Health Preparedness and Response (OPHPR), concerning strategies and goals for the programs and...

  20. 76 FR 18221 - Board of Scientific Counselors, Office of Public Health Preparedness and Response (BSC, OPHPR)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-01

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Public Health Preparedness and Response (BSC, OPHPR) In accordance with... of Public Health Preparedness and Response (OPHPR), concerning strategies and goals for the programs...

  1. 33 CFR 26.03 - Radiotelephone required.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... on board capable of operation from its navigational bridge, or in the case of a dredge, from its main control station, and capable of transmitting and receiving on the frequency or frequencies within the 156... section must be carried on board the described vessels, dredges, and floating plants upon the navigable...

  2. 33 CFR 26.03 - Radiotelephone required.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... on board capable of operation from its navigational bridge, or in the case of a dredge, from its main control station, and capable of transmitting and receiving on the frequency or frequencies within the 156... section must be carried on board the described vessels, dredges, and floating plants upon the navigable...

  3. 76 FR 59188 - Agency Information Collection Activities; Renewal of a Currently Approved Collection; Comment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-23

    ... Gambling AGENCIES: Board of Governors of the Federal Reserve System (``Board'') and Departmental Offices... Unlawful Internet Gambling Enforcement Act of 2006 (the ``Act''). This notice is published jointly by the... Approved Information Collection Title: Prohibition on Funding of Unlawful Internet Gambling. OMB Control...

  4. 7 CFR 982.38 - Powers.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Powers. 982.38 Section 982.38 Agriculture Regulations... Order Regulating Handling Hazelnut Control Board § 982.38 Powers. The Board shall have the following powers: (a) To administer the provisions of this subpart in accordance with its terms; (b) To make rules...

  5. 78 FR 22785 - Approval and Promulgation of Air Quality Implementation Plans; Delaware, State Board Requirements

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-17

    ... Promulgation of Air Quality Implementation Plans; Delaware, State Board Requirements AGENCY: Environmental... revision to the Delaware State Implementation Plan (SIP) submitted by the Delaware Department of Natural Resources and Environmental Control (DNREC) on January 11, 2013. The SIP revision addresses requirements of...

  6. 36 CFR 222.34 - National Advisory Board.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... MANAGEMENT Management of Wild Free-Roaming Horses and Burros § 222.34 National Advisory Board. The Chief... Free-Roaming Horses and Burros and to function as prescribed by the Memorandum of Agreement between the... generally to the protection, management, and control of wild free-roaming horses and burros shall be...

  7. The Role of the Federal Government in the Development of the US Air Transportation System

    NASA Technical Reports Server (NTRS)

    Vittek, J. F.

    1972-01-01

    Reviewed are the roles of the various Federal agencies in the regulation, control, and development of the Air System, with major emphasis on the Department of Transportation (Office of the Secretary, Federal Aviation Administration, and National Transportation Safety Board) and the Civil Aeronautics Board.

  8. 75 FR 78779 - Order Approving Public Company Accounting Oversight Board Supplemental Budget Request To...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-16

    ...; Securities Exchange Act of 1934 Release No. 63526/December 10, 2010] Order Approving Public Company... Company Accounting Oversight Board (the ``PCAOB'') to oversee the audits of companies and related matters..., subject to approval by the Commission, auditing and related attestation, quality control, ethics, and...

  9. 7 CFR 982.38 - Powers.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Powers. 982.38 Section 982.38 Agriculture Regulations... Order Regulating Handling Hazelnut Control Board § 982.38 Powers. The Board shall have the following powers: (a) To administer the provisions of this subpart in accordance with its terms; (b) To make rules...

  10. 10 CFR 1304.110 - Disclosure of records to third parties.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Board with adequate advance written assurance that the record will be used solely as a statistical... under the control of the United States for a civil or criminal law enforcement activity, if the activity... record is disclosed under such compulsory legal process, the Board shall make reasonable efforts to...

  11. Shifting Governance and Control in Church-Related Institutions of Higher Education.

    ERIC Educational Resources Information Center

    Fioke, Clarence J.; King, Richard A.

    Factors related to shifts in governance patterns of church-related private colleges were investigated through historical document analysis, interviews with 34 presidents and board members, and 59 questionnaires returned by current and past board members of 2 New Mexico institutions. Document analysis focused upon mission statements, annual…

  12. 77 FR 29346 - Agency Information Collection Activities: Announcement of Board Approval Under Delegated...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-17

    ... purpose of the survey is to provide qualitative and limited quantitative information on credit...--Division of Research and Statistics, Board of Governors of the Federal Reserve System, Washington, DC 20551... Opinion Survey on Bank Lending Practices. Agency form number: FR 2018. OMB control number: 7100-0058...

  13. 77 FR 5802 - Proposed Agency Information Collection Activities; Comment Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-06

    .... Federal Reserve Board Clearance Officer--Cynthia Ayouch--Division of Research and Statistics, Board of... Survey on Bank Lending Practices. Agency form number: FR 2018. OMB control number: 7100-0058. Frequency... respondent bank, generally through electronic submission, up to six times a year. The purpose of the survey...

  14. The Disproportionate Erosion of Local Control: Urban School Boards, High-Stakes Accountability, and Democracy

    ERIC Educational Resources Information Center

    Trujillo, Tina M.

    2013-01-01

    This case study of an urban school board's experiences under high-stakes accountability demonstrates how the district leaders eschewed democratic governance processes in favor of autocratic behaviors. They possessed narrowly defined goals for teaching and learning that emphasized competitive, individualized means of achievement. Their decision…

  15. 32 CFR 631.8 - Participation by civil agencies.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 32 National Defense 4 2013-07-01 2013-07-01 false Participation by civil agencies. 631.8 Section... AND OPERATIONS Armed Forces Disciplinary Control Boards § 631.8 Participation by civil agencies. (a) Civil agencies or individuals may be invited to board meetings as observers, witnesses or to provide...

  16. 32 CFR 631.8 - Participation by civil agencies.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 32 National Defense 4 2012-07-01 2011-07-01 true Participation by civil agencies. 631.8 Section... AND OPERATIONS Armed Forces Disciplinary Control Boards § 631.8 Participation by civil agencies. (a) Civil agencies or individuals may be invited to board meetings as observers, witnesses or to provide...

  17. Modular cryogenic interconnects for multi-qubit devices.

    PubMed

    Colless, J I; Reilly, D J

    2014-11-01

    We have developed a modular interconnect platform for the control and readout of multiple solid-state qubits at cryogenic temperatures. The setup provides 74 filtered dc-bias connections, 32 control and readout connections with -3 dB frequency above 5 GHz, and 4 microwave feed lines that allow low loss (less than 3 dB) transmission 10 GHz. The incorporation of a radio-frequency interposer enables the platform to be separated into two printed circuit boards, decoupling the simple board that is bonded to the qubit chip from the multilayer board that incorporates expensive connectors and components. This modular approach lifts the burden of duplicating complex interconnect circuits for every prototype device. We report the performance of this platform at milli-Kelvin temperatures, including signal transmission and crosstalk measurements.

  18. Advanced Control Considerations for Turbofan Engine Design

    NASA Technical Reports Server (NTRS)

    Connolly, Joseph W.; Csank, Jeffrey T.; Chicatelli, Amy

    2016-01-01

    This paper covers the application of a model-based engine control (MBEC) methodology featuring a self tuning on-board model for an aircraft turbofan engine simulation. The nonlinear engine model is capable of modeling realistic engine performance, allowing for a verification of the advanced control methodology over a wide range of operating points and life cycle conditions. The on-board model is a piece-wise linear model derived from the nonlinear engine model and updated using an optimal tuner Kalman Filter estimation routine, which enables the on-board model to self-tune to account for engine performance variations. MBEC is used here to show how advanced control architectures can improve efficiency during the design phase of a turbofan engine by reducing conservative operability margins. The operability margins that can be reduced, such as stall margin, can expand the engine design space and offer potential for efficiency improvements. Application of MBEC architecture to a nonlinear engine simulation is shown to reduce the thrust specific fuel consumption by approximately 1% over the baseline design, while maintaining safe operation of the engine across the flight envelope.

  19. Principles and practices board. Issue Analysis 98-1. Compliance with laws and regulations for healthcare organizations. Healthcare Financial Management Association.

    PubMed

    1998-09-01

    This is the third Issue Analysis of HFMA's Principles and Practices (P&P) Board. The P&P Board writes an Issue Analysis in response to the need for practical information on emerging issues in healthcare financial management. An Issue Analysis is factual but not authoritative. It is not sent out for public comment and provides the healthcare industry short-term assistance on emerging issues. The purpose of P&P Board Issue Analysis 98-1, Compliance with Laws and Regulations for Healthcare Organizations, is to help healthcare financial managers understand their responsibility to implement and maintain an effective internal control system to ensure compliance with laws and regulations.

  20. View southeast of main supervisory board showing panels 3 through ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View southeast of main supervisory board showing panels 3 through 11; panel 3 at far left contains meters for monitoring power in the system; panel 4 contains controls for controlling heaters to keep track twitches free of ice and snow; panels 5, 6, and 7 date to the 1935 installation and control the catenary in the area of the station yard. These work on 120 volts direct current; panel 8 contains circuit breakers (rupture switches) which control power to individual tracks in the station area; panels 9 and 10 house controls for the West Philadelphia sub-station; panel 11 controls sub-station 13 in South Wilmington Delaware and miscellaneous meters - Thirtieth Street Station, Power Director Center, Thirtieth & Market Streets in Amtrak Railroad Station, Philadelphia, Philadelphia County, PA

  1. Board Game in Physics Classes—a Proposal for a New Method of Student Assessment

    NASA Astrophysics Data System (ADS)

    Dziob, Daniel

    2018-03-01

    The aim of this study was to examine the impact of assessing students' achievements in a physics course in the form of a group board game. Research was conducted in two groups of 131 high school students in Poland. In each school, the research sample was divided into experimental and control groups. Each group was taught by the same teacher and participated in the same courses and tests before the game. Just after finishing the course on waves and vibrations (school 1) and optics (school 2), experimental groups took part in a group board game to assess their knowledge. One week after the game, the experimental and control groups (not involved in the game) took part in the post-tests. Students from the experimental groups performed better in the game than in the tests given before the game. As well their results in the post-tests were significantly higher statistically than students from the control groups. Simultaneously, student's opinions in the experimental groups about the board game as an assessment method were collected in an open-descriptive form and in a short questionnaire, and analyzed. Results showed that students experienced a positive attitude toward the assessment method, a reduction of test anxiety and an increase in their motivation for learning.

  2. State survey of medical boards regarding abrupt loss of a prescriber of controlled substances.

    PubMed

    Sera, Leah; Brown, Micke; McPherson, Mary Lynn; Walker, Kathryn A; Klein-Schwartz, Wendy

    The purpose of the study was to evaluate states' experiences with abrupt changes in controlled substances (CS) prescribing, to determine whether states have action plans in place to manage such situations, and describe the components of any such plans. A survey of executive directors of 51 medical boards was conducted to evaluate states' experiences with abrupt changes in CS prescribing, the extent of consumer complaints attributed to these events, and the types of plans in place to manage these situations. Forty-six executive directors of medical boards responded. Twenty boards (43.5 percent) confirmed that their state had experienced abrupt loss of CS providers and 11 (55 percent) of these executive directors indicated that the loss resulted in increased consumer complaints. The majority of executive directors (86 percent) had no action plan. Six executive directors reported some type of action plan or process consisting of regulatory action, patient-provider connection, professional education, patient education, or public notice. Most states do not have operational plans in place. However, a few have key strategies that may be useful in addressing potential problems following abrupt loss of a CS prescriber. State medical boards can play a significant role in the development of comprehensive preparedness plans to mitigate damage from the loss of CS prescribers in the community.

  3. Recent developments for the upgrade of the LHCb readout system

    NASA Astrophysics Data System (ADS)

    Cachemiche, J. P.; Y Duval, P.; Hachon, F.; Le Gac, R.; Réthoré, F.

    2013-02-01

    The upgraded LHCb readout system aims at a trigger-free readout of the entire detector at the bunch-crossing rate. This implies a major architectural change for the readout system that must capture the data at 40 MHz instead of 1 MHz. One of the key components of this upgrade system is the readout board. The LHCb collaboration has chosen to evaluate the ATCA architecture as form-factor for the readout board. The readout system architecture relies on a unique board able to satisfy all the requirements for data transmission, timing and fast control as well as experiment control system. A generic ATCA carrier board has been developped. It is equipped with four dense AMC mezzanines able to interface a total of 144 bidirectional optical links at up to 10 Gbits/s. This board embeds 4 high end Stratix V GX devices for data processing and a programmable set of commutation functions allowing to reconfigure the connectivity of the system in a flexible way. The overall architecture will be presented and how the cards map over each functionality. First results and measurements will be described in particular those related to the use of new highly integrated optical devices. At last we will present the incremental development methodology used in this project.

  4. Development of automatic pre-tracking system for fillet weld based on laser trigonometry

    NASA Astrophysics Data System (ADS)

    Shen, Xiaoqin; Yu, Fusheng

    2005-01-01

    In this paper, an automatic fillet weld pre-tracking system for welding the work piece of lorry back boards with several bend in haul automobile is developed basing on laser trigonometry. The optical measuring head based on laser-PSD trigonometry is used as position sensor. It is placed in front of the traveling direction of welding wire to get the distances from welding wire to the two side boards of the welding lines, upper board and bottom board of the fillet weld respectively. A chip of AT89S52 is used as the micro controller in this system. The AC servomotors, ball-screws and straight guide rails constitute the sliding table to take welding wire move. The laser-PSD sensors pass through the vertical board, upper board and bottom board of the fillet weld when welding wire moves and then get the distance. The laser-PSD sensors output the analog signals. After A/D conversion, the digital signal is input into AT89S52 and calculated. Then the information of the position and lateral deviation of the welding wire when welding a certain position are gotten to control welding wires. So the weld pre-tracking for welding the work piece with long distance and large bend in haul automobile is realized. The position information is input into EEPROM to be saved for short time after handled by AT89S52. The information is as the welding position information as well as the speed adjusting data of the welding wire when it welds the several bend of the work piece. The practice indicates that this system has high pre-tracking precision, good anti-disturb ability, excellent reliability, easy operating ability and good adaptability to the field of production.

  5. Design of a wheeled articulating land rover

    NASA Technical Reports Server (NTRS)

    Stauffer, Larry; Dilorenzo, Mathew; Yandle, Barbara

    1994-01-01

    The WALRUS is a wheeled articulating land rover that will provide Ames Research Center with a reliable, autonomous vehicle for demonstrating and evaluating advanced technologies. The vehicle is one component of the Ames Research Center's on-going Human Exploration Demonstration Project. Ames Research Center requested a system capable of traversing a broad spectrum of surface types and obstacles. In addition, this vehicle must have an autonomous navigation and control system on board and its own source of power. The resulting design is a rover that articulates in two planes of motion to allow for increased mobility and stability. The rover is driven by six conical shaped aluminum wheels, each with an independent, internally coupled motor. Mounted on the rover are two housings and a removable remote control system. In the housings, the motor controller board, tilt sensor, navigation circuitry, and QED board are mounted. Finally, the rover's motors and electronics are powered by thirty C-cell rechargeable batteries, which are located in the rover wheels and recharged by a specially designed battery charger.

  6. Soft Real-Time PID Control on a VME Computer

    NASA Technical Reports Server (NTRS)

    Karayan, Vahag; Sander, Stanley; Cageao, Richard

    2007-01-01

    microPID (uPID) is a computer program for real-time proportional + integral + derivative (PID) control of a translation stage in a Fourier-transform ultraviolet spectrometer. microPID implements a PID control loop over a position profile at sampling rate of 8 kHz (sampling period 125microseconds). The software runs in a strippeddown Linux operating system on a VersaModule Eurocard (VME) computer operating in real-time priority queue using an embedded controller, a 16-bit digital-to-analog converter (D/A) board, and a laser-positioning board (LPB). microPID consists of three main parts: (1) VME device-driver routines, (2) software that administers a custom protocol for serial communication with a control computer, and (3) a loop section that obtains the current position from an LPB-driver routine, calculates the ideal position from the profile, and calculates a new voltage command by use of an embedded PID routine all within each sampling period. The voltage command is sent to the D/A board to control the stage. microPID uses special kernel headers to obtain microsecond timing resolution. Inasmuch as microPID implements a single-threaded process and all other processes are disabled, the Linux operating system acts as a soft real-time system.

  7. New Strategies of Control: Academic Freedom and Research Ethics Boards

    ERIC Educational Resources Information Center

    Lewis, Magda

    2008-01-01

    This article, detailing the implications of "ethics drift" for critical work in the academy, reports on an ethics challenge to a non-research-based scholarly text. It analyzes how General Research Ethics Boards (GREBs) can threaten academic freedom when they lack a clear definition of "human subject" research, fail to…

  8. 77 FR 39346 - Proposed Information Collection (Statement of Accredited Representative in Appealed Case, VA Form...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-02

    ... in Appealed Case, VA Form 646. OMB Control Number: 2900-0042. Type of Review: Extension of a... (Statement of Accredited Representative in Appealed Case, VA Form 646) Activity: Comment Request AGENCY: The Board of Veterans' Appeals (BVA), Department of Veterans Affairs. ACTION: Notice. SUMMARY: The Board of...

  9. Same-Page Lessons from Front-Page Crises

    ERIC Educational Resources Information Center

    Simpson, Christopher

    2006-01-01

    In a university's time of crisis, reporters will often attempt to catch the president and board members in conflicting responses in order to develop a "gotcha" news story. It is important for leaders not to take the bait. In times of crisis, board members and institutional leaders must not only control the message and flow of…

  10. Impact of the Shodan Computer Search Engine on Internet-facing Industrial Control System Devices

    DTIC Science & Technology

    2014-03-27

    bridge implementation. The transparent bridge is designed using a Raspberry Pi configured with Linux IPtables and bridge-utils to bridge the on board...Ethernet card and a second USB Ethernet adapter. A Raspberry Pi is a credit-card-sized single-board computer running a version of Debian Linux. There

  11. 75 FR 42448 - Board of Scientific Counselors (BSC), Coordinating Center for Health Promotion (CCHP): Notice of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-21

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention (CDC) Board of Scientific Counselors (BSC), Coordinating Center for Health Promotion (CCHP): Notice of Charter Amendment... both the CDC and the Agency for Toxic Substances and Disease Registry. Dated: July 13, 2010. Elaine L...

  12. Scholarly Networking among Business Students: Structured Discussion Board Activity and Academic Outcomes

    ERIC Educational Resources Information Center

    Walker, Kristen; Curren, Mary T.; Kiesler, Tina; Lammers, H. Bruce; Goldenson, Jamie

    2013-01-01

    The authors' intent was to show the effect of student discussion board activity on academic outcomes, after accounting for past academic performance. Data were collected from 516 students enrolled in a junior-level required business course. Controlling for students' grade point average, stepwise regression showed a significant…

  13. Once Established, What Techniques Work Best for Monitoring the District?

    ERIC Educational Resources Information Center

    Triverio, Louis E.

    Monitoring school budget expenditures is as important as budgeting. School boards should decide which broad financial policies will provide control of expenditures, what financial tools to use in monitoring expenditures, and what areas outside of the budget should be monitored. A board's financial policy ought to deal with the line item transfers,…

  14. 76 FR 70128 - California State Motor Vehicle Pollution Control Standards; Amendments to the California Heavy...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-10

    ... Standards; Amendments to the California Heavy-Duty Engine On-Board Diagnostic Regulation; Waiver Request... that it has adopted amendments to its regulations related to heavy-duty engine on-board diagnostic (HD... and gasoline powered heavy-duty engines (engines used in vehicles having a gross vehicle weight rating...

  15. 77 FR 47841 - Agency Information Collection Activities: Announcement of Board Approval Under Delegated...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-10

    ...--Division of Research and Statistics, Board of Governors of the Federal Reserve System, Washington, DC 20551.... 5. Report title: Supervisory and Regulatory Survey. Agency form Number: FR 3052. OMB Control Number: 7100-0322. Frequency: On occasion.\\1\\ \\1\\ The Federal Reserve conducts the survey as needed up to 24...

  16. Improved charge injection device and a focal plane interface electronics board for stellar tracking

    NASA Technical Reports Server (NTRS)

    Michon, G. J.; Burke, H. K.

    1984-01-01

    An improved Charge Injection Device (CID) stellar tracking sensor and an operating sensor in a control/readout electronics board were developed. The sensor consists of a shift register scanned, 256x256 CID array organized for readout of 4x4 subarrays. The 4x4 subarrays can be positioned anywhere within the 256x256 array with a 2 pixel resolution. This allows continuous tracking of a number of stars simultaneously since nine pixels (3x3) centered on any star can always be read out. Organization and operation of this sensor and the improvements in design and semiconductor processing are described. A hermetic package incorporating an internal thermoelectric cooler assembled using low temperature solders was developed. The electronics board, which contains the sensor drivers, amplifiers, sample hold circuits, multiplexer, analog to digital converter, and the sensor temperature control circuits, is also described. Packaged sensors were evaluated for readout efficiency, spectral quantum efficiency, temporal noise, fixed pattern noise, and dark current. Eight sensors along with two tracker electronics boards were completed, evaluated, and delivered.

  17. Integrated failure detection and management for the Space Station Freedom external active thermal control system

    NASA Technical Reports Server (NTRS)

    Mesloh, Nick; Hill, Tim; Kosyk, Kathy

    1993-01-01

    This paper presents the integrated approach toward failure detection, isolation, and recovery/reconfiguration to be used for the Space Station Freedom External Active Thermal Control System (EATCS). The on-board and on-ground diagnostic capabilities of the EATCS are discussed. Time and safety critical features, as well as noncritical failures, and the detection coverage for each provided by existing capabilities are reviewed. The allocation of responsibility between on-board software and ground-based systems, to be shown during ground testing at the Johnson Space Center, is described. Failure isolation capabilities allocated to the ground include some functionality originally found on orbit but moved to the ground to reduce on-board resource requirements. Complex failures requiring the analysis of multiple external variables, such as environmental conditions, heat loads, or station attitude, are also allocated to ground personnel.

  18. CuOF: an electrical to optical interface for the upgrade of the CMS muon Drift Tubes system

    NASA Astrophysics Data System (ADS)

    Dattola, D.; De Remigis, P.; Maselli, S.; Mazza, G.; Rotondo, F.; Wheadon, R.

    2013-02-01

    The upgrade of the Drift Tube system of the CMS experiment foresee the relocation of the electronics actually sitting on the racks beside the magnet from the cavern to the counting room. It is thus required to convert the signals from electrical to optical, for a total number of 3500 channels that run at up to 480 Mb/s. A Copper to Optical Fiber board is currently under design. The board is divided into a mother board, which hosts the slow control system based on Field Programmable Gate Array, and four mezzanine cards, each with 8 conversion channels. A prototype of the mezzanine board has been designed and tested under irradiation.

  19. Leak-Before-Break: Further developments in regulatory policies and supporting research

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wilkowski, G.M.; Chao, K.-S.

    1990-02-01

    The fourth in a series of international Leak-Before-Break (LBB) Seminars supported in part by the US Nuclear Regulatory Commission was held at the National Central Library in Taipei, Taiwan on May 11 and 12, 1989. The seminar updated the international polices and supporting research on LBB. Attendees included representatives from regulatory agencies, electric utilities, nuclear power plant fabricators, research organizations, and academic institutions. Regulatory policy was the subject of presentations by Mr. G. Arlotto (US NRC, USA) Dr. B. Jarman (AECB, Canada), Dr.P. Milella (ENEA-DISP, Italy), Dr. C. Faidy (EDF/Septen, France ), and Dr. K. Takumi (NUPEC, Japan). A papermore » by Mr. K. Wichman and Mr. A. Lee of the US NRC Office of Nuclear Reactor Regulation is included as background material to these proceedings; it discusses the history and status of LBB applications in US nuclear power plants. In addition, several papers on the supporting research programs described regulatory policy or industry standards for flaw evaluations, e.g., the ASME Section XI code procedures. Supporting research programs were reviewed on the first and second day by several participants from Taiwan, US, Japan, Canada, Italy, and France. Each individual paper has been cataloged separately.« less

  20. Impedance Discontinuity Reduction Between High-Speed Differential Connectors and PCB Interfaces

    NASA Technical Reports Server (NTRS)

    Navidi, Sal; Agdinaoay, Rodell; Walter, Keith

    2013-01-01

    High-speed serial communication (i.e., Gigabit Ethernet) requires differential transmission and controlled impedances. Impedance control is essential throughout cabling, connector, and circuit board construction. An impedance discontinuity arises at the interface of a high-speed quadrax and twinax connectors and the attached printed circuit board (PCB). This discontinuity usually is lower impedance since the relative dielectric constant of the board is higher (i.e., polyimide approx. = 4) than the connector (Teflon approx. = 2.25). The discontinuity can be observed in transmit or receive eye diagrams, and can reduce the effective link margin of serial data networks. High-speed serial data network transmission improvements can be made at the connector-to-board interfaces as well as improving differential via hole impedances. The impedance discontinuity was improved by 10 percent by drilling a 20-mil (approx. = 0.5-mm) hole in between the pin of a differential connector spaced 55 mils (approx. = 1.4 mm) apart as it is attached to the PCB. The effective dielectric constant of the board can be lowered by drilling holes into the board material between the differential lines in a quadrax or twinax connector attachment points. The differential impedance is inversely proportional to the square root of the relative dielectric constant. This increases the differential impedance and thus reduces the above described impedance discontinuity. The differential via hole impedance can also be increased in the same manner. This technique can be extended to multiple smaller drilled holes as well as tapered holes (i.e., big in the middle followed by smaller ones diagonally).

  1. "Who's in Charge?" The System of Governance for Florida's Twenty-Eight Community Colleges.

    ERIC Educational Resources Information Center

    Maxwell, Clark, Jr.; Belohlavek, John

    The primary mission of Florida's community colleges is to respond to community needs for postsecondary academic and degree career education. Local community college boards of trustees are charged with setting policies to accomplish this mission. It is important that local boards of trustees, rather than outside state agencies, maintain control of…

  2. The MGS Avionics System Architecture: Exploring the Limits of Inheritance

    NASA Technical Reports Server (NTRS)

    Bunker, R.

    1994-01-01

    Mars Global Surveyor (MGS) avionics system architecture comprises much of the electronics on board the spacecraft: electrical power, attitude and articulation control, command and data handling, telecommunications, and flight software. Schedule and cost constraints dictated a mix of new and inherited designs, especially hardware upgrades based on findings of the Mars Observer failure review boards.

  3. Fiberboards from loblolly pine refiner groundwood: effects of gross wood characteristics and board density

    Treesearch

    Charles W. McMillin

    1968-01-01

    Boards for insulation and and structural uses are being manufactured in increasing quantities. The coarse fiber required for these products can be disk-refined from untreated wood chips. Since such fiber is produced in essentially one mechanical operation, continuous control is required of the raw material as well as the refining process.

  4. 76 FR 69712 - U.S. Air Force Scientific Advisory Board; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-09

    ...: Meeting notice. SUMMARY: Due to difficulties, beyond the control of the U.S. Air Force Scientific Advisory... Scientific Advisory Board should submit a written statement in accordance with 41 CFR 102-3.140(c) and.... Written statements can be submitted to the Designated Federal Officer at the address detailed below at any...

  5. 77 FR 37705 - Notice of Call for Nominations for the Wild Horse and Burro Advisory Board

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-22

    ... DEPARTMENT OF THE INTERIOR Bureau of Land Management [LLWO260000 L10600000 XQ0000] Notice of Call for Nominations for the Wild Horse and Burro Advisory Board AGENCY: Bureau of Land Management... management, protection, and control of wild free-roaming horses and burros on the public lands administered...

  6. Effective Governing Boards: A Guide for Members of Governing Boards of Independent Colleges and Universities

    ERIC Educational Resources Information Center

    Association of Governing Boards of Universities and Colleges, 2011

    2011-01-01

    The long history of volunteerism in America has its roots in colonial religious and educational enterprises. From the beginning, colleges and universities have been independently governed rather than subject to national or state control. This autonomy is a uniquely American tradition. Over the centuries, the work of academic governing…

  7. Medical Device Plug-and-Play Interoperability Standards and Technology Leadership

    DTIC Science & Technology

    2012-10-01

    External Network Pump Adapter PulseOx Adapter • MD MP3 cart is a platform for the development of smart pump control algorithms • It includes...delivery with bounded latency Medical Device Mobile PnP Prototype Platform (MD MP3 ) • Got MDCF code to run on the BeagleBoard development boards we are

  8. Boarding Chances for Children: A Report on Lessons Learned

    ERIC Educational Resources Information Center

    Murphy, David; Oliver, Mary; Pourhabib, Sanam; Adkins, Michael; Hodgen, Jeremy

    2017-01-01

    This report examines the range of factors that might influence the decision by social care professionals on the use of boarding schools as an intervention option for Children in Need (CiN) or children on a Child Protection Plan (CPP). Attempts to conduct a randomised controlled trial (RCT) failed to recruit participants. Initially, failure to…

  9. 75 FR 66762 - Agency Information Collection Activities: Announcement of Board Approval Under Delegated...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-29

    ... and Salary Surveys. Agency form number: FR 29a,b. OMB control number: 7100-0290. Frequency: FR 29a... independence to determine its employees' salaries and compensation. Individual respondent data are regarded as... jointly. The FR 29b is collected by Board staff. The FR 29a,b collect information on salaries, employee...

  10. 76 FR 28847 - Adrian & Blissfield Rail Road Company-Continuance in Control-Charlotte Southern Railroad Company...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-18

    ...) requires that the Board take environmental considerations into account in its decision making.\\6\\ Under... schedule for consideration of the application, providing for the Board's final decision to be issued on... decision is May 18, 2011. Any person who wishes to participate in this proceeding as a party of record (POR...

  11. Power Electronics Design Laboratory Exercise for Final-Year M.Sc. Students

    ERIC Educational Resources Information Center

    Max, L.; Thiringer, T.; Undeland, T.; Karlsson, R.

    2009-01-01

    This paper presents experiences and results from a project task in power electronics for students at Chalmers University of Technology, Goteborg, Sweden, based on a flyback test board. The board is used in the course Power Electronic Devices and Applications. In the project task, the students design snubber circuits, improve the control of the…

  12. On-board closed-loop congestion control for satellite based packet switching networks

    NASA Technical Reports Server (NTRS)

    Chu, Pong P.; Ivancic, William D.; Kim, Heechul

    1993-01-01

    NASA LeRC is currently investigating a satellite architecture that incorporates on-board packet switching capability. Because of the statistical nature of packet switching, arrival traffic may fluctuate and thus it is necessary to integrate congestion control mechanism as part of the on-board processing unit. This study focuses on the closed-loop reactive control. We investigate the impact of the long propagation delay on the performance and propose a scheme to overcome the problem. The scheme uses a global feedback signal to regulate the packet arrival rate of ground stations. In this scheme, the satellite continuously broadcasts the status of its output buffer and the ground stations respond by selectively discarding packets or by tagging the excessive packets as low-priority. The two schemes are evaluated by theoretical queuing analysis and simulation. The former is used to analyze the simplified model and to determine the basic trends and bounds, and the later is used to assess the performance of a more realistic system and to evaluate the effectiveness of more sophisticated control schemes. The results show that the long propagation delay makes the closed-loop congestion control less responsive. The broadcasted information can only be used to extract statistical information. The discarding scheme needs carefully-chosen status information and reduction function, and normally requires a significant amount of ground discarding to reduce the on-board packet loss probability. The tagging scheme is more effective since it tolerates more uncertainties and allows a larger margin of error in status information. It can protect the high-priority packets from excessive loss and fully utilize the downlink bandwidth at the same time.

  13. Mechanism controller system for the optical spectroscopic and infrared remote imaging system instrument on board the Rosetta space mission

    NASA Astrophysics Data System (ADS)

    Castro Marín, J. M.; Brown, V. J. G.; López Jiménez, A. C.; Rodríguez Gómez, J.; Rodrigo, R.

    2001-05-01

    The optical, spectroscopic infrared remote imaging system (OSIRIS) is an instrument carried on board the European Space Agency spacecraft Rosetta that will be launched in January 2003 to study in situ the comet Wirtanen. The electronic design of the mechanism controller board (MCB) system of the two OSIRIS optical cameras, the narrow angle camera, and the wide angle camera, is described here. The system is comprised of two boards mounted on an aluminum frame as part of an electronics box that contains the power supply and the digital processor unit of the instrument. The mechanisms controlled by the MCB for each camera are the front door assembly and a filter wheel assembly. The front door assembly for each camera is driven by a four phase, permanent magnet stepper motor. Each filter wheel assembly consists of two, eight filter wheels. Each wheel is driven by a four phase, variable reluctance stepper motor. Each motor, for all the assemblies, also contains a redundant set of four stator phase windings that can be energized separately or in parallel with the main windings. All stepper motors are driven in both directions using the full step unipolar mode of operation. The MCB also performs general housekeeping data acquisition of the OSIRIS instrument, i.e., mechanism position encoders and temperature measurements. The electronic design application used is quite new due to use of a field programmable gate array electronic devices that avoid the use of the now traditional system controlled by microcontrollers and software. Electrical tests of the engineering model have been performed successfully and the system is ready for space qualification after environmental testing. This system may be of interest to institutions involved in future space experiments with similar needs for mechanisms control.

  14. 12 CFR 225.31 - Control proceedings.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 3 2013-01-01 2013-01-01 false Control proceedings. 225.31 Section 225.31... (CONTINUED) BANK HOLDING COMPANIES AND CHANGE IN BANK CONTROL (REGULATION Y) Regulations Control and Divestiture Proceedings § 225.31 Control proceedings. (a) Preliminary determination of control. (1) The Board...

  15. Development of a software interface for optical disk archival storage for a new life sciences flight experiments computer

    NASA Technical Reports Server (NTRS)

    Bartram, Peter N.

    1989-01-01

    The current Life Sciences Laboratory Equipment (LSLE) microcomputer for life sciences experiment data acquisition is now obsolete. Among the weaknesses of the current microcomputer are small memory size, relatively slow analog data sampling rates, and the lack of a bulk data storage device. While life science investigators normally prefer data to be transmitted to Earth as it is taken, this is not always possible. No down-link exists for experiments performed in the Shuttle middeck region. One important aspect of a replacement microcomputer is provision for in-flight storage of experimental data. The Write Once, Read Many (WORM) optical disk was studied because of its high storage density, data integrity, and the availability of a space-qualified unit. In keeping with the goals for a replacement microcomputer based upon commercially available components and standard interfaces, the system studied includes a Small Computer System Interface (SCSI) for interfacing the WORM drive. The system itself is designed around the STD bus, using readily available boards. Configurations examined were: (1) master processor board and slave processor board with the SCSI interface; (2) master processor with SCSI interface; (3) master processor with SCSI and Direct Memory Access (DMA); (4) master processor controlling a separate STD bus SCSI board; and (5) master processor controlling a separate STD bus SCSI board with DMA.

  16. Miniature Six-Axis Load Sensor for Robotic Fingertip

    NASA Technical Reports Server (NTRS)

    Diftler, Myron A.; Martin, Toby B.; Valvo, Michael C.; Rodriguez, Dagoberto; Chu, Mars W.

    2009-01-01

    A miniature load sensor has been developed as a prototype of tactile sensors that could fit within fingertips of anthropomorphic robot hands. The sensor includes a force-and-torque transducer in the form of a spring instrumented with at least six semiconductor strain gauges. The strain-gauge wires are secured to one side of an interface circuit board mounted at the base of the spring. This board protects the strain-gauge wires from damage that could otherwise occur as a result of finger motions. On the opposite side of the interface board, cables routed along the neutral axis of the finger route the strain-gauge output voltages to an analog-to-digital converter (A/D) board. The A/D board is mounted as close as possible to the strain gauges to minimize electromagnetic noise and other interference effects. The outputs of the A/D board are fed to a controller, wherein, by means of a predetermined calibration matrix, the digitized strain-gauge output voltages are converted to three vector components of force and three of torque exerted by or on the fingertip.

  17. A Macintosh-Based Scientific Images Video Analysis System

    NASA Technical Reports Server (NTRS)

    Groleau, Nicolas; Friedland, Peter (Technical Monitor)

    1994-01-01

    A set of experiments was designed at MIT's Man-Vehicle Laboratory in order to evaluate the effects of zero gravity on the human orientation system. During many of these experiments, the movements of the eyes are recorded on high quality video cassettes. The images must be analyzed off-line to calculate the position of the eyes at every moment in time. To this aim, I have implemented a simple inexpensive computerized system which measures the angle of rotation of the eye from digitized video images. The system is implemented on a desktop Macintosh computer, processes one play-back frame per second and exhibits adequate levels of accuracy and precision. The system uses LabVIEW, a digital output board, and a video input board to control a VCR, digitize video images, analyze them, and provide a user friendly interface for the various phases of the process. The system uses the Concept Vi LabVIEW library (Graftek's Image, Meudon la Foret, France) for image grabbing and displaying as well as translation to and from LabVIEW arrays. Graftek's software layer drives an Image Grabber board from Neotech (Eastleigh, United Kingdom). A Colour Adapter box from Neotech provides adequate video signal synchronization. The system also requires a LabVIEW driven digital output board (MacADIOS II from GW Instruments, Cambridge, MA) controlling a slightly modified VCR remote control used mainly to advance the video tape frame by frame.

  18. Expert system for on-board satellite scheduling and control

    NASA Technical Reports Server (NTRS)

    Barry, John M.; Sary, Charisse

    1988-01-01

    An Expert System is described which Rockwell Satellite and Space Electronics Division (S&SED) is developing to dynamically schedule the allocation of on-board satellite resources and activities. This expert system is the Satellite Controller. The resources to be scheduled include power, propellant and recording tape. The activities controlled include scheduling satellite functions such as sensor checkout and operation. The scheduling of these resources and activities is presently a labor intensive and time consuming ground operations task. Developing a schedule requires extensive knowledge of the system and subsystems operations, operational constraints, and satellite design and configuration. This scheduling process requires highly trained experts anywhere from several hours to several weeks to accomplish. The process is done through brute force, that is examining cryptic mnemonic data off line to interpret the health and status of the satellite. Then schedules are formulated either as the result of practical operator experience or heuristics - that is rules of thumb. Orbital operations must become more productive in the future to reduce life cycle costs and decrease dependence on ground control. This reduction is required to increase autonomy and survivability of future systems. The design of future satellites require that the scheduling function be transferred from ground to on board systems.

  19. Crisis prevention: how to gear up your board.

    PubMed

    Salmon, W J

    1993-01-01

    Today's critics of corporate boardrooms have plenty of ammunition. The two crucial responsibilities of boards-oversight of long-term company strategy and the selection, evaluation, and compensation of top management--were reduced to damage control during the 1980s. Walter Salmon, a longtime director, notes that while boards have improved since he began serving on them in 1961, they haven't kept pace with the need for real change. Based on over 30 years of boardroom experience, Salmon recommends against government reform of board practices. But he does prescribe a series of incremental changes as a remedy. To begin with, he suggests limiting the size of boards and increasing the number of outside directors on them. In fact, according to Salmon, only three insiders belong on a board: the CEO, the COO, and the CFO. Changing how committees function is also necessary for gearing up today's boards. The audit committee, for example, can periodically review "high-exposure areas" of a business, perhaps helping to prevent embarrassing drops in future profits. Compensation committees can structure incentive compensation for executives to emphasize long-term rather than short-term performance. And nominating committees should be responsible for finding new, independent directors--not the CEO. In general, boards as a whole must spot problems early and blow the whistle, exercising what Salmon calls, "constructive dissatisfaction." On a revitalized board, directors have enough confidence in the process to vigorously challenge one another, including the company's chief executive.

  20. Design of the Trigger Interface and Distribution Board for CEBAF 12 GeV Upgrade

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gu, Jianhui; Dong, Hai; Cuevas, R

    The design of the Trigger Interface and Distribution (TID) board for the 12 GeV Upgrade at the Continuous Electron Beam Accelerator Facility (CEBAF) at TJNAL is described. The TID board distributes a low jitter system clock, synchronized trigger, and synchronized multi-purpose SYNC signal. The TID also initiates data acquisition for the crate. With the TID boards, a multi-crate system can be setup for experiment test and commissioning. The TID board can be selectively populated as a Trigger Interface (TI) board, or a Trigger Distribution (TD) board for the 12 GeV upgrade experiments. When the TID is populated as a TI,more » it can be located in the VXS crate and distribute the CLOCK/TRIGGER/SYNC through the VXS P0 connector; it can also be located in the standard VME64 crate, and distribute the CLOCK/TRIGGER/SYNC through the VME P2 connector or front panel. It initiates the data acquisition for the front crate where the TI is positioned in. When the TID is populated as a TD, it fans out the CLOCK/TRIGGER/SYNC from trigger supervisor to the front end crates through optical fibres. The TD monitors the trigger processing on the TIs, and gives feedback to the TS for trigger flow control. Field Programmable Gate Arrays (FPGA) is utilised on TID board to provide programmability. The TID boards were intensively tested on the bench, and various setups.« less

  1. 12 CFR 225.31 - Control proceedings.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 12 Banks and Banking 3 2011-01-01 2011-01-01 false Control proceedings. 225.31 Section 225.31... BANK HOLDING COMPANIES AND CHANGE IN BANK CONTROL (REGULATION Y) Regulations Control and Divestiture Proceedings § 225.31 Control proceedings. (a) Preliminary determination of control. (1) The Board may issue a...

  2. Victoria's review of registration for health practitioners.

    PubMed

    Scotts, H; Carter, M

    1988-01-01

    This article discusses some of the issues raised in the Interim Report of the current Review of Registration of Health Practitioners being conducted for the Victorian Health Department. The Report attempts to develop the framework in which the registration Boards will operate as part of a cohesive registration system. It proposed a mechanism and criteria for the registration of new groups as well as principles which can be applied to the ongoing review of each existing Board. The Review takes the perspective that registration of health practitioners carries with it both advantages and disadvantages for the general community. Under the proposed new system the controls exercised over health care providers by Registration Boards would be evaluated on the basis of to what extent the benefits to the public outweighed the potential costs. It is in this context that the Report addresses issues such as consumer complaints handling, registration of individual practitioners and controls over professional advertising and other business practices.

  3. Design and testing of a 750MHz CW-EPR digital console for small animal imaging.

    PubMed

    Sato-Akaba, Hideo; Emoto, Miho C; Hirata, Hiroshi; Fujii, Hirotada G

    2017-11-01

    This paper describes the development of a digital console for three-dimensional (3D) continuous wave electron paramagnetic resonance (CW-EPR) imaging of a small animal to improve the signal-to-noise ratio and lower the cost of the EPR imaging system. A RF generation board, an RF acquisition board and a digital signal processing (DSP) & control board were built for the digital EPR detection. Direct sampling of the reflected RF signal from a resonator (approximately 750MHz), which contains the EPR signal, was carried out using a band-pass subsampling method. A direct automatic control system to reduce the reflection from the resonator was proposed and implemented in the digital EPR detection scheme. All DSP tasks were carried out in field programmable gate array ICs. In vivo 3D imaging of nitroxyl radicals in a mouse's head was successfully performed. Copyright © 2017 Elsevier Inc. All rights reserved.

  4. Development of on-board fuel metering and sensing system

    NASA Astrophysics Data System (ADS)

    Hemanth, Y.; Manikanta, B. S. S.; Thangaraja, J.; Bharanidaran, R.

    2017-11-01

    Usage of biodiesel fuels and their blends with diesel fuel has a potential to reduce the tailpipe emissions and reduce the dependence on crude oil imports. Further, biodiesel fuels exhibit favourable greenhouse gas emission and energy balance characteristics. While fossil fuel technology is well established, the technological implications of biofuels particularly biodiesel is not clearly laid out. Hence, the objective is to provide an on-board metering control in selecting the different proportions of diesel and bio-diesel blends. An on-board fuel metering system is being developed using PID controller, stepper motors and a capacitance sensor. The accuracy was tested with the blends of propanol-1, diesel and are found to be within 1.3% error. The developed unit was tested in a twin cylinder diesel engine with biodiesel blended diesel fuel. There was a marginal increase (5%) in nitric oxide and 14% increase in smoke emission with 10% biodiesel blended diesel at part load conditions.

  5. Design and testing of a 750 MHz CW-EPR digital console for small animal imaging

    NASA Astrophysics Data System (ADS)

    Sato-Akaba, Hideo; Emoto, Miho C.; Hirata, Hiroshi; Fujii, Hirotada G.

    2017-11-01

    This paper describes the development of a digital console for three-dimensional (3D) continuous wave electron paramagnetic resonance (CW-EPR) imaging of a small animal to improve the signal-to-noise ratio and lower the cost of the EPR imaging system. A RF generation board, an RF acquisition board and a digital signal processing (DSP) & control board were built for the digital EPR detection. Direct sampling of the reflected RF signal from a resonator (approximately 750 MHz), which contains the EPR signal, was carried out using a band-pass subsampling method. A direct automatic control system to reduce the reflection from the resonator was proposed and implemented in the digital EPR detection scheme. All DSP tasks were carried out in field programmable gate array ICs. In vivo 3D imaging of nitroxyl radicals in a mouse's head was successfully performed.

  6. Intelligent Rover Execution for Detecting Life in the Atacama Desert

    NASA Technical Reports Server (NTRS)

    Baskaran, Vijayakumar; Muscettola, Nicola; Rijsman, David; Plaunt, Chris; Fry, Chuck

    2006-01-01

    On-board supervisory execution is crucial for the deployment of more capable and autonomous remote explorers. Planetary science is considering robotic explorers operating for long periods of time without ground supervision while interacting with a changing and often hostile environment. Effective and robust operations require on-board supervisory control with a high level of awareness of the principles of functioning of the environment and of the numerous internal subsystems that need to be coordinated. We describe an on-board rover executive that was deployed on a rover as past of the "Limits of Life in the Atacama Desert (LITA)" field campaign sponsored by the NASA ASTEP program. The executive was built using the Intelligent Distributed Execution Architecture (IDEA), an execution framework that uses model-based and plan-based supervisory control of its fundamental computational paradigm. We present the results of the third field experiment conducted in the Atacama desert (Chile) in August - October 2005.

  7. Arduino: a low-cost multipurpose lab equipment.

    PubMed

    D'Ausilio, Alessandro

    2012-06-01

    Typical experiments in psychological and neurophysiological settings often require the accurate control of multiple input and output signals. These signals are often generated or recorded via computer software and/or external dedicated hardware. Dedicated hardware is usually very expensive and requires additional software to control its behavior. In the present article, I present some accuracy tests on a low-cost and open-source I/O board (Arduino family) that may be useful in many lab environments. One of the strengths of Arduinos is the possibility they afford to load the experimental script on the board's memory and let it run without interfacing with computers or external software, thus granting complete independence, portability, and accuracy. Furthermore, a large community has arisen around the Arduino idea and offers many hardware add-ons and hundreds of free scripts for different projects. Accuracy tests show that Arduino boards may be an inexpensive tool for many psychological and neurophysiological labs.

  8. Development and application of General Purpose Data Acquisition Shell (GPDAS) at advanced photon source

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chung, Youngjoo; Kim, Keeman.

    1991-01-01

    An operating system shell GPDAS (General Purpose Data Acquisition Shell) on MS-DOS-based microcomputers has been developed to provide flexibility in data acquisition and device control for magnet measurements at the Advanced Photon Source. GPDAS is both a command interpreter and an integrated script-based programming environment. It also incorporates the MS-DOS shell to make use of the existing utility programs for file manipulation and data analysis. Features include: alias definition, virtual memory, windows, graphics, data and procedure backup, background operation, script programming language, and script level debugging. Data acquisition system devices can be controlled through IEEE488 board, multifunction I/O board, digitalmore » I/O board and Gespac crate via Euro G-64 bus. GPDAS is now being used for diagnostics R D and accelerator physics studies as well as for magnet measurements. Their hardware configurations will also be discussed. 3 refs., 3 figs.« less

  9. Single board system for fuzzy inference

    NASA Technical Reports Server (NTRS)

    Symon, James R.; Watanabe, Hiroyuki

    1991-01-01

    The very large scale integration (VLSI) implementation of a fuzzy logic inference mechanism allows the use of rule-based control and decision making in demanding real-time applications. Researchers designed a full custom VLSI inference engine. The chip was fabricated using CMOS technology. The chip consists of 688,000 transistors of which 476,000 are used for RAM memory. The fuzzy logic inference engine board system incorporates the custom designed integrated circuit into a standard VMEbus environment. The Fuzzy Logic system uses Transistor-Transistor Logic (TTL) parts to provide the interface between the Fuzzy chip and a standard, double height VMEbus backplane, allowing the chip to perform application process control through the VMEbus host. High level C language functions hide details of the hardware system interface from the applications level programmer. The first version of the board was installed on a robot at Oak Ridge National Laboratory in January of 1990.

  10. ALICE inner tracking system readout electronics prototype testing with the CERN "Giga Bit Transceiver''

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Schambach, Joachim; Rossewij, M. J.; Sielewicz, K. M.

    The ALICE Collaboration is preparing a major detector upgrade for the LHC Run 3, which includes the construction of a new silicon pixel based Inner Tracking System (ITS). The ITS readout system consists of 192 readout boards to control the sensors and their power system, receive triggers, and deliver sensor data to the DAQ. To prototype various aspects of this readout system, an FPGA based carrier board and an associated FMC daughter card containing the CERN Gigabit Transceiver (GBT) chipset have been developed. Furthermore, this contribution describes laboratory and radiation testing results with this prototype board set.

  11. ALICE inner tracking system readout electronics prototype testing with the CERN "Giga Bit Transceiver''

    DOE PAGES

    Schambach, Joachim; Rossewij, M. J.; Sielewicz, K. M.; ...

    2016-12-28

    The ALICE Collaboration is preparing a major detector upgrade for the LHC Run 3, which includes the construction of a new silicon pixel based Inner Tracking System (ITS). The ITS readout system consists of 192 readout boards to control the sensors and their power system, receive triggers, and deliver sensor data to the DAQ. To prototype various aspects of this readout system, an FPGA based carrier board and an associated FMC daughter card containing the CERN Gigabit Transceiver (GBT) chipset have been developed. Furthermore, this contribution describes laboratory and radiation testing results with this prototype board set.

  12. ALICE inner tracking system readout electronics prototype testing with the CERN ``Giga Bit Transceiver''

    NASA Astrophysics Data System (ADS)

    Schambach, J.; Rossewij, M. J.; Sielewicz, K. M.; Aglieri Rinella, G.; Bonora, M.; Ferencei, J.; Giubilato, P.; Vanat, T.

    2016-12-01

    The ALICE Collaboration is preparing a major detector upgrade for the LHC Run 3, which includes the construction of a new silicon pixel based Inner Tracking System (ITS). The ITS readout system consists of 192 readout boards to control the sensors and their power system, receive triggers, and deliver sensor data to the DAQ. To prototype various aspects of this readout system, an FPGA based carrier board and an associated FMC daughter card containing the CERN Gigabit Transceiver (GBT) chipset have been developed. This contribution describes laboratory and radiation testing results with this prototype board set.

  13. Challenging questions in treating bronchitis.

    PubMed

    Bode, F R

    1998-10-01

    Whatever facts we gather and no matter how many we have, you and I must eventually put the journal down and pick up our stethoscope, pen, and prescription pad and go to work. Hopefully we can do better than, "Therapy is not uniform and specific antibiotic regimens are usually selected based on local tribal custom." We can discard an old paradigm, "The absence of data bears no relation to the strength of opinion." Personally, I have used these new scientific data before I reached my conclusion. I have developed 10 points to structure my new approach. I invite you to compare my conclusions to yours. 1. In acute bronchitis, in otherwise healthy adults, my preference is to not prescribe an antibiotic. If I do, it is not over the phone. You should want to see and examine the patient. If there are no helpful hints to etiology, I choose a newer macrolide for those under age 50 and use a short course, five-seven days. For patients over age 50, especially if they are "healthy smokers," consider a short course of cefuroxime. (You can see, even in these acute bronchitis patients, you want an antibiotic effective against today's pathogens.) 2. In all chronic bronchitis patients, prevention of further damage to the airways should be attempted by instituting a program of smoking cessation and appropriate immunizations against influenza and pneumococcus. 3. Treatment outcomes will also improve if we recognize that in some patients the progressing SOB, cough, and increasing sputum production are due to congestive heart failure and not due to infection. I try to think about congestive heart failure in all of my patients, but especially in those with known heart disease and cardiomegaly on their chest x-ray. 4. Routine pulmonary function testing is important in smoking patients. Physicians underestimate the degree of obstruction present when they rely on physical exam alone. Hopefully long before the patient's acute illness you have established whether or not obstruction is present. This information helps identify the high risk patient for not only recurrent bouts of infection but also those at increased risk for lung cancer. 5. We will have more success in treating AECB when we elect to use an antibiotic only for patients with at least two of the following three cardinal symptoms: increased dyspnea, increased sputum production, and increased purulent sputum. COPD patients have many days when they feel more SOB. To use this or any one sign as the sole indication for starting an antibiotic has been proven not to make a statistically significant difference in outcome in most patients. Also, the value of prophylactic antibiotic therapy has not been established. 6. When airflow obstruction is moderately severe or more pronounced, AECB should usually be treated with oral steroids. Other measures such as chronic bronchodilator therapy, supplemental and home oxygen use, and pulmonary rehabilitation have been extensively reviewed elsewhere.

  14. Coherent operation of detector systems and their readout electronics in a complex experiment control environment

    NASA Astrophysics Data System (ADS)

    Koestner, Stefan

    2009-09-01

    With the increasing size and degree of complexity of today's experiments in high energy physics the required amount of work and complexity to integrate a complete subdetector into an experiment control system is often underestimated. We report here on the layered software structure and protocols used by the LHCb experiment to control its detectors and readout boards. The experiment control system of LHCb is based on the commercial SCADA system PVSS II. Readout boards which are outside the radiation area are accessed via embedded credit card sized PCs which are connected to a large local area network. The SPECS protocol is used for control of the front end electronics. Finite state machines are introduced to facilitate the control of a large number of electronic devices and to model the whole experiment at the level of an expert system.

  15. Hardware description ADSP-21020 40-bit floating point DSP as designed in a remotely controlled digital CW Doppler radar

    NASA Astrophysics Data System (ADS)

    Morrison, R. E.; Robinson, S. H.

    A continuous wave Doppler radar system has been designed which is portable, easily deployed, and remotely controlled. The heart of this system is a DSP/control board using Analog Devices ADSP-21020 40-bit floating point digital signal processor (DSP) microprocessor. Two 18-bit audio A/D converters provide digital input to the DSP/controller board for near real time target detection. Program memory for the DSP is dual ported with an Intel 87C51 microcontroller allowing DSP code to be up-loaded or down-loaded from a central controlling computer. The 87C51 provides overall system control for the remote radar and includes a time-of-day/day-of-year real time clock, system identification (ID) switches, and input/output (I/O) expansion by an Intel 82C55 I/O expander.

  16. 12 CFR 238.21 - Control proceedings.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 4 2013-01-01 2013-01-01 false Control proceedings. 238.21 Section 238.21... (CONTINUED) SAVINGS AND LOAN HOLDING COMPANIES (REGULATION LL) Control Proceedings § 238.21 Control proceedings. (a) Preliminary determination of control. (1) The Board may issue a preliminary determination of...

  17. 12 CFR 238.21 - Control proceedings.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 12 Banks and Banking 4 2012-01-01 2012-01-01 false Control proceedings. 238.21 Section 238.21... (CONTINUED) SAVINGS AND LOAN HOLDING COMPANIES (REGULATION LL) Control Proceedings § 238.21 Control proceedings. (a) Preliminary determination of control. (1) The Board may issue a preliminary determination of...

  18. A Wireless Object Location Detector Enabling People with Developmental Disabilities to Control Environmental Stimulation through Simple Occupational Activities with Nintendo Wii Balance Boards

    ERIC Educational Resources Information Center

    Shih, Ching-Hsiang; Chang, Man-Ling

    2012-01-01

    The latest researches have adopted software technology, turning the Nintendo Wii Balance Board into a high performance standing location detector with a newly developed standing location detection program (SLDP). This study extended SLDP functionality to assess whether two people with developmental disabilities would be able to actively perform…

  19. Model Debate for the Yellow Book Learning in Islamic Boarding School

    ERIC Educational Resources Information Center

    Apdoludin; Saidek, Abdul Rahim; Islami, Raisul

    2016-01-01

    This study aimed to determine the effect model of debate in the yellow book learning in schools to improve students' critical thinking skills so they can find a new science. This study was an experimental study with a control group. The study was conducted in classes XI Islamic Boarding School Al-Hidayah Jambi. This study uses two parallel…

  20. The Great Lakes fisheries: A review of the report of the International Board of Inquiry for the Great Lakes Fisheries

    USGS Publications Warehouse

    Van Oosten, John

    1942-01-01

    In August, 1942, the International Board of Inquiry for the Great Lakes Fisheries submitted its report to the governments of the United States and States and Canada. The report, which culminated a two-year investigation, recommended a common or joint agency of control for the fisheries through an international treaty.

  1. 12 CFR 225.93 - What are the consequences of a foreign bank failing to continue to meet applicable capital and...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... management requirements? (a) Notice by the Board. If a foreign bank or company has made an effective election to be treated as a financial holding company under this subpart and the Board finds that the foreign... HOLDING COMPANIES AND CHANGE IN BANK CONTROL (REGULATION Y) Regulations Financial Holding Companies § 225...

  2. Report of the Planning Commission for a New University at Boca Raton.

    ERIC Educational Resources Information Center

    Florida State Dept. of Education, Tallahassee.

    Following the decision to establish a new university at Boca Raton, the Board of Control of Florida's Board of Education appointed a committee to revise, refine and develop plans for the new institution and to make preliminary estimates of space requirements and costs. The plans and proposals in this report represent a thorough study by the…

  3. Final Rule for Control of Air Pollution From Motor Vehicles and New Motor Vehicle Engines; Modification of Federal Onboard Diagnostic Regulations for Light-Duty Vehicles and Light-Duty Trucks; Extension of Acceptance of California OBD

    EPA Pesticide Factsheets

    This action finalizes modifications to the federal on-board diagnostics regulations, including: harmonizing the emission levels above which a component or system is considered malfunctioning with those of the California Air Resources Board (CARB).

  4. A Tale of Two Policies: The Case of School Discipline in an Ontario School Board

    ERIC Educational Resources Information Center

    Milne, Emily; Aurini, Janice

    2017-01-01

    This study examines how staff working for one Ontario school board perceive two distinct approaches to school discipline policy: the Safe Schools Act (Bill 81) and Progressive Discipline and School Safety (Bill 212). The more centrally controlled and rigid Safe Schools Act was criticized by interviewees and cited for human rights violations.…

  5. Practising Democracy: Business Community Representatives in the Control of English and Welsh Schools.

    ERIC Educational Resources Information Center

    Thody, Angela

    The 1986 Education Act required that business community members in England and Wales be appointed to the governing boards of local public schools. Since the passage of the law, the idea of sponsored governors has developed. Sponsored governors receive financial supported from their companies to serve on the boards. A survey of employees of three…

  6. An Elderly Care System Based on Multiple Information Fusion

    PubMed Central

    Lu, Dongwei

    2018-01-01

    With the development of social economy in the 21st century, and the rising of medical level, the aging of population have become a global trend. However lots of elderly people are in “empty nest” state. In order to solve the problem of high risk of daily life in this group, this paper proposed a method to integrate the information of video images, sound, infrared, pulse, and other information into the elderly care system. The whole system consists of four major components, that is, the main control board, the information acquisition boards, the server, and the client. The control board receives, processes and analyzes the data collected by the information acquisition boards, and uploads necessary information to the server, which are to be saved to the database. When something unexpected occurs to the elderly, the system will notify the relatives through the GPRS (general packet radio service) module. The system also provides an interface for the relatives to inquire the living status of the elderly through an app. The system can monitor the living status for the elderly with the characteristics of quick response, high accuracy, and low cost and can be widely applied to the elderly care at home. PMID:29599947

  7. Implementation of data acquisition interface using on-board field-programmable gate array (FPGA) universal serial bus (USB) link

    NASA Astrophysics Data System (ADS)

    Yussup, N.; Ibrahim, M. M.; Lombigit, L.; Rahman, N. A. A.; Zin, M. R. M.

    2014-02-01

    Typically a system consists of hardware as the controller and software which is installed in the personal computer (PC). In the effective nuclear detection, the hardware involves the detection setup and the electronics used, with the software consisting of analysis tools and graphical display on PC. A data acquisition interface is necessary to enable the communication between the controller hardware and PC. Nowadays, Universal Serial Bus (USB) has become a standard connection method for computer peripherals and has replaced many varieties of serial and parallel ports. However the implementation of USB is complex. This paper describes the implementation of data acquisition interface between a field-programmable gate array (FPGA) board and a PC by exploiting the USB link of the FPGA board. The USB link is based on an FTDI chip which allows direct access of input and output to the Joint Test Action Group (JTAG) signals from a USB host and a complex programmable logic device (CPLD) with a 24 MHz clock input to the USB link. The implementation and results of using the USB link of FPGA board as the data interfacing are discussed.

  8. An Elderly Care System Based on Multiple Information Fusion.

    PubMed

    He, Zhiwei; Lu, Dongwei; Yang, Yuxiang; Gao, Mingyu

    2018-01-01

    With the development of social economy in the 21st century, and the rising of medical level, the aging of population have become a global trend. However lots of elderly people are in "empty nest" state. In order to solve the problem of high risk of daily life in this group, this paper proposed a method to integrate the information of video images, sound, infrared, pulse, and other information into the elderly care system. The whole system consists of four major components, that is, the main control board, the information acquisition boards, the server, and the client. The control board receives, processes and analyzes the data collected by the information acquisition boards, and uploads necessary information to the server, which are to be saved to the database. When something unexpected occurs to the elderly, the system will notify the relatives through the GPRS (general packet radio service) module. The system also provides an interface for the relatives to inquire the living status of the elderly through an app. The system can monitor the living status for the elderly with the characteristics of quick response, high accuracy, and low cost and can be widely applied to the elderly care at home.

  9. Implementation of data acquisition interface using on-board field-programmable gate array (FPGA) universal serial bus (USB) link

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Yussup, N.; Ibrahim, M. M.; Lombigit, L.

    Typically a system consists of hardware as the controller and software which is installed in the personal computer (PC). In the effective nuclear detection, the hardware involves the detection setup and the electronics used, with the software consisting of analysis tools and graphical display on PC. A data acquisition interface is necessary to enable the communication between the controller hardware and PC. Nowadays, Universal Serial Bus (USB) has become a standard connection method for computer peripherals and has replaced many varieties of serial and parallel ports. However the implementation of USB is complex. This paper describes the implementation of datamore » acquisition interface between a field-programmable gate array (FPGA) board and a PC by exploiting the USB link of the FPGA board. The USB link is based on an FTDI chip which allows direct access of input and output to the Joint Test Action Group (JTAG) signals from a USB host and a complex programmable logic device (CPLD) with a 24 MHz clock input to the USB link. The implementation and results of using the USB link of FPGA board as the data interfacing are discussed.« less

  10. Electronics design of the RPC system for the OPERA muon spectrometer

    NASA Astrophysics Data System (ADS)

    Acquafredda, R.; Ambrosio, M.; Balsamo, E.; Barichello, G.; Bergnoli, A.; Consiglio, L.; Corradi, G.; dal Corso, F.; Felici, G.; Manea, C.; Masone, V.; Parascandolo, P.; Sorrentino, G.

    2004-09-01

    The present document describes the front-end electronics of the RPC system that instruments the magnet muon spectrometer of the OPERA experiment. The main task of the OPERA spectrometer is to provide particle tracking information for muon identification and simplify the matching between the Precision Trackers. As no trigger has been foreseen for the experiment, the spectrometer electronics must be self-triggered with single-plane readout capability. Moreover, precision time information must be added within each event frame for off-line reconstruction. The read-out electronics is made of three different stages: the Front-End Boards (FEBs) system, the Controller Boards (CBs) system and the Trigger Boards (TBs) system. The FEB system provides discrimination of the strip incoming signals; a FAST-OR output of the input signals is also available for trigger plane signal generation. FEB signals are acquired by the CB system that provides the zero suppression and manages the communication to the DAQ and Slow Control. A Trigger Board allows to operate in both self-trigger mode (the FEB's FAST-OR signal starts the plane acquisition) or in external-trigger mode (different conditions can be set on the FAST-OR signals generated from different planes).

  11. Microchannel cooling of face down bonded chips

    DOEpatents

    Bernhardt, Anthony F.

    1993-01-01

    Microchannel cooling is applied to flip-chip bonded integrated circuits, in a manner which maintains the advantages of flip-chip bonds, while overcoming the difficulties encountered in cooling the chips. The technique is suited to either multichip integrated circuit boards in a plane, or to stacks of circuit boards in a three dimensional interconnect structure. Integrated circuit chips are mounted on a circuit board using flip-chip or control collapse bonds. A microchannel structure is essentially permanently coupled with the back of the chip. A coolant delivery manifold delivers coolant to the microchannel structure, and a seal consisting of a compressible elastomer is provided between the coolant delivery manifold and the microchannel structure. The integrated circuit chip and microchannel structure are connected together to form a replaceable integrated circuit module which can be easily decoupled from the coolant delivery manifold and the circuit board. The coolant supply manifolds may be disposed between the circuit boards in a stack and coupled to supplies of coolant through a side of the stack.

  12. Implementation of real-time nonuniformity correction with multiple NUC tables using FPGA in an uncooled imaging system

    NASA Astrophysics Data System (ADS)

    Oh, Gyong Jin; Kim, Lyang-June; Sheen, Sue-Ho; Koo, Gyou-Phyo; Jin, Sang-Hun; Yeo, Bo-Yeon; Lee, Jong-Ho

    2009-05-01

    This paper presents a real time implementation of Non Uniformity Correction (NUC). Two point correction and one point correction with shutter were carried out in an uncooled imaging system which will be applied to a missile application. To design a small, light weight and high speed imaging system for a missile system, SoPC (System On a Programmable Chip) which comprises of FPGA and soft core (Micro-blaze) was used. Real time NUC and generation of control signals are implemented using FPGA. Also, three different NUC tables were made to make the operating time shorter and to reduce the power consumption in a large range of environment temperature. The imaging system consists of optics and four electronics boards which are detector interface board, Analog to Digital converter board, Detector signal generation board and Power supply board. To evaluate the imaging system, NETD was measured. The NETD was less than 160mK in three different environment temperatures.

  13. Microchannel cooling of face down bonded chips

    DOEpatents

    Bernhardt, A.F.

    1993-06-08

    Microchannel cooling is applied to flip-chip bonded integrated circuits, in a manner which maintains the advantages of flip-chip bonds, while overcoming the difficulties encountered in cooling the chips. The technique is suited to either multi chip integrated circuit boards in a plane, or to stacks of circuit boards in a three dimensional interconnect structure. Integrated circuit chips are mounted on a circuit board using flip-chip or control collapse bonds. A microchannel structure is essentially permanently coupled with the back of the chip. A coolant delivery manifold delivers coolant to the microchannel structure, and a seal consisting of a compressible elastomer is provided between the coolant delivery manifold and the microchannel structure. The integrated circuit chip and microchannel structure are connected together to form a replaceable integrated circuit module which can be easily decoupled from the coolant delivery manifold and the circuit board. The coolant supply manifolds may be disposed between the circuit boards in a stack and coupled to supplies of coolant through a side of the stack.

  14. Environmental Considerations for Municipal Waste Combustors

    DTIC Science & Technology

    1994-07-01

    phone as above) 700 H Samet Sacramento, CA 95814 NORTHERN SONOMA COUNTY Air Pollution Control SAN BENITO COUNTY (See Monterey Bay Northern Sonoma County Air...Control Northern Sonoma County Air Pollution Control District San Bernardino County Air Pollution Control District Board of Directors 15428 Civic Drive 575

  15. A universal six-joint robot controller

    NASA Technical Reports Server (NTRS)

    Bihn, D. G.; Hsia, T. C.

    1987-01-01

    A general purpose six-axis robotic manipulator controller was designed and implemented to serve as a research tool for the investigation of the practical and theoretical aspects of various control strategies in robotics. A 80286-based Intel System 310 running the Xenix operating servo software as well as the higher level software (e.g., kinematics and path planning) were employed. A Multibus compatible interface board was designed and constructed to handle I/O signals from the robot manipulator's joint motors. From the design point of view, the universal controller is capable of driving robot manipulators equipped with D.C. joint motors and position optical encoders. To test its functionality, the controller is connected to the joint motor D.C. power amplifier of a PUMA 560 arm bypassing completely the manufacturer-supplied Unimation controller. A controller algorithm consisting of local PD control laws was written and installed into the Xenix operating system. Additional software drivers were implemented to allow application programs access to the interface board. All software was written in the C language.

  16. Regulating outdoor advertisement boards; employing spatial decision support system to control urban visual pollution

    NASA Astrophysics Data System (ADS)

    Wakil, K.; Hussnain, MQ; Tahir, A.; Naeem, M. A.

    2016-06-01

    Unmanaged placement, size, location, structure and contents of outdoor advertisement boards have resulted in severe urban visual pollution and deterioration of the socio-physical living environment in urban centres of Pakistan. As per the regulatory instruments, the approval decision for a new advertisement installation is supposed to be based on the locational density of existing boards and their proximity or remoteness to certain land- uses. In cities, where regulatory tools for the control of advertisement boards exist, responsible authorities are handicapped in effective implementation due to the absence of geospatial analysis capacity. This study presents the development of a spatial decision support system (SDSS) for regularization of advertisement boards in terms of their location and placement. The knowledge module of the proposed SDSS is based on provisions and restrictions prescribed in regulatory documents. While the user interface allows visualization and scenario evaluation to understand if the new board will affect existing linear density on a particular road and if it violates any buffer restrictions around a particular land use. Technically the structure of the proposed SDSS is a web-based solution which includes open geospatial tools such as OpenGeo Suite, GeoExt, PostgreSQL, and PHP. It uses three key data sets including road network, locations of existing billboards and building parcels with land use information to perform the analysis. Locational suitability has been calculated using pairwise comparison through analytical hierarchy process (AHP) and weighted linear combination (WLC). Our results indicate that open geospatial tools can be helpful in developing an SDSS which can assist solving space related iterative decision challenges on outdoor advertisements. Employing such a system will result in effective implementation of regulations resulting in visual harmony and aesthetic improvement in urban communities.

  17. Fast wire per wire X-ray data acquisition system for time-resolved small angle scattering experiments

    NASA Astrophysics Data System (ADS)

    Epstein, A.; Briquet-Laugier, F.; Sheldon, S.; Boulin, C.

    2000-04-01

    Most of the X-ray multi-wire gas detectors used at the EMBL Hamburg outstation for time-resolved studies of biological samples are readout, using the delay line method. The main disadvantage of such readout systems is their event rate limitation introduced by the delay line and the required time to digital conversion step. They also lack the possibility to deal with multiple events. To overcome these limitations, a new approach for the complete readout system was introduced. The new linear detection system is based on the wire per wire approach where each individual wire is associated to preamplifier/discriminator/counter electronics channel. High-density, front-end electronics were designed around a fast current sensitive preamplifier. An eight-channel board was designed to include the preamplifiers-discriminators and the differential ECL drivers output stages. The detector front-end consists of 25 boards directly mounted inside the detector assembly. To achieve a time framing resolution as short as 10 /spl mu/s, very fast histogramming is required. The only way to implement this for a high number of channels (200 in our case) is by using a distributed system. The digital part of the system consists of a crate controller, up to 16 acquisition boards (capable of handling fast histogramming for up to 32-channels each) and an optical-link board (based on the Cypress "Hot-Link" chip set). Both the crate controller and the acquisition boards are based on a standard RISC microcontroller (IDT R3081) plug-in board. At present, a dedicated CAMAC module which we developed is used to interface the digital front-end acquisition crate to the host via the optical link.

  18. Study of orbiter/payload interface communications configuration control board directive from an operational perspective

    NASA Technical Reports Server (NTRS)

    Addis, A. W.; Tatosian, C. G.; Lidsey, J. F.

    1974-01-01

    Orbiter/payload data and communications interface was examined. It was found that the Configuration Control Board Directive (CCBD) greatly increases the capability of the orbiter to communicate with a wide variety of projected shuttle payloads. Rather than being derived from individual payload communication requirements, the CCBD appears to be based on an operational philosophy that requires the orbiter to duplicate or augment the ground network/payload communication links. It is suggested that the implementation of the CCBD be reviewed and compared with the Level 1 Program Requirements Document, differences reconciled, and interface characteristics defined.

  19. The methodology of variable management of propellant fuel consumption by jet-propulsion engines of a spacecraft

    NASA Astrophysics Data System (ADS)

    Kovtun, V. S.

    2012-12-01

    Traditionally, management of propellant fuel consumption on board of a spacecraft is only associated with the operation of jet-propulsion engines (JPE) that are actuator devices of motion control systems (MCS). The efficiency of propellant fuel consumption depends not only on the operation of the MCS, but also, to one extent or another, on all systems functioning on board of a spacecraft, and on processes that occur in them and involve conversion of variable management of propellant fuel consumption by JPEs as a constituent part of the control of the complex process of spacecraft flight.

  20. Bayesian Software Health Management for Aircraft Guidance, Navigation, and Control

    NASA Technical Reports Server (NTRS)

    Schumann, Johann; Mbaya, Timmy; Menghoel, Ole

    2011-01-01

    Modern aircraft, both piloted fly-by-wire commercial aircraft as well as UAVs, more and more depend on highly complex safety critical software systems with many sensors and computer-controlled actuators. Despite careful design and V&V of the software, severe incidents have happened due to malfunctioning software. In this paper, we discuss the use of Bayesian networks (BNs) to monitor the health of the on-board software and sensor system, and to perform advanced on-board diagnostic reasoning. We will focus on the approach to develop reliable and robust health models for the combined software and sensor systems.

  1. Lessons Learned Using COTS Electronics for the International Space Station Radiation Environment

    NASA Technical Reports Server (NTRS)

    Blumer, John H.; Roth, A. (Technical Monitor)

    2001-01-01

    The mantra of 'Faster, Better, Cheaper' has to a large degree been interpreted as using Commercial Off-the-Shelf (COTS) components and/or circuit boards. One of the first space applications to actually use COTS in space along with radiation performance requirements was the Expedite the Processing of Experiments to Space Station (EXPRESS) Rack program, for the International Space Station (ISS). In order to meet the performance, cost and schedule targets, military grade Versa Module Eurocard (VME) was selected as the baseline design for the main computer, the Rack Interface Controller (RIC). VME was chosen as the computer backplane because of the large variety of military grade boards available, which were designed to meet the military environmental specifications (thermal, shock, vibration, etc.). These boards also have a paper pedigree in regards to components. Since these boards exceeded most ISS environmental requirements, it was reasoned using COTS mid-grade VME boards, as opposed to designing custom boards could save significant time and money. It was recognized up front the radiation environment of ISS, while benign compared to many space flight applications, would be the main challenge to using COTS. Thus in addition to selecting vendors on how well their boards met the usual performance and environmental specifications, the board's parts lists were reviewed on how well they would perform in the ISS radiation environment. However, issues with verifying that the available radiation test data was applicable to the actual part used, vendor part design changes and the fact most parts did not have valid test data soon complicated board and part selection in regards to radiation.

  2. An Integrated Architecture for On-Board Aircraft Engine Performance Trend Monitoring and Gas Path Fault Diagnostics

    NASA Technical Reports Server (NTRS)

    Simon, Donald L.

    2010-01-01

    Aircraft engine performance trend monitoring and gas path fault diagnostics are closely related technologies that assist operators in managing the health of their gas turbine engine assets. Trend monitoring is the process of monitoring the gradual performance change that an aircraft engine will naturally incur over time due to turbomachinery deterioration, while gas path diagnostics is the process of detecting and isolating the occurrence of any faults impacting engine flow-path performance. Today, performance trend monitoring and gas path fault diagnostic functions are performed by a combination of on-board and off-board strategies. On-board engine control computers contain logic that monitors for anomalous engine operation in real-time. Off-board ground stations are used to conduct fleet-wide engine trend monitoring and fault diagnostics based on data collected from each engine each flight. Continuing advances in avionics are enabling the migration of portions of the ground-based functionality on-board, giving rise to more sophisticated on-board engine health management capabilities. This paper reviews the conventional engine performance trend monitoring and gas path fault diagnostic architecture commonly applied today, and presents a proposed enhanced on-board architecture for future applications. The enhanced architecture gains real-time access to an expanded quantity of engine parameters, and provides advanced on-board model-based estimation capabilities. The benefits of the enhanced architecture include the real-time continuous monitoring of engine health, the early diagnosis of fault conditions, and the estimation of unmeasured engine performance parameters. A future vision to advance the enhanced architecture is also presented and discussed

  3. 34. PRIMARY FLIGHT CONTROL STATION AFT LOOKING FORWARD ON ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    34. PRIMARY FLIGHT CONTROL STATION - AFT LOOKING FORWARD ON PORT SIDE SHOWING FLIGHT DECK LIGHTING BOARD, ARRESTING GEAR CONTROL CONSOLE AND FRESNEL LENS OPTICAL LANDING SYSTEM. - U.S.S. HORNET, Puget Sound Naval Shipyard, Sinclair Inlet, Bremerton, Kitsap County, WA

  4. 12 CFR 618.8430 - Internal controls.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 12 Banks and Banking 6 2011-01-01 2011-01-01 false Internal controls. 618.8430 Section 618.8430 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM GENERAL PROVISIONS Internal Controls § 618.8430 Internal controls. Each Farm Credit institution's board of directors must adopt an internal...

  5. 78 FR 11889 - Centers for Disease Control and Prevention

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-20

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of... Disease Control and Prevention, Department of Health and Human Services, has been renewed for a 2-year... Scientific Counselors, National Institute for Occupational Safety and Health, Centers for Disease Control and...

  6. 12 CFR 618.8430 - Internal controls.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Internal controls. 618.8430 Section 618.8430 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM GENERAL PROVISIONS Internal Controls § 618.8430 Internal controls. Each Farm Credit institution's board of directors must adopt an internal...

  7. 7 CFR 930.44 - Quality control.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Quality control. 930.44 Section 930.44 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Control § 930.44 Quality control. (a) Quality standards. The Board may establish, with the approval of the...

  8. 7 CFR 930.44 - Quality control.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Quality control. 930.44 Section 930.44 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Control § 930.44 Quality control. (a) Quality standards. The Board may establish, with the approval of the...

  9. 7 CFR 930.44 - Quality control.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 8 2012-01-01 2012-01-01 false Quality control. 930.44 Section 930.44 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Control § 930.44 Quality control. (a) Quality standards. The Board may establish, with the approval of the...

  10. 7 CFR 930.44 - Quality control.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 8 2013-01-01 2013-01-01 false Quality control. 930.44 Section 930.44 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS... Control § 930.44 Quality control. (a) Quality standards. The Board may establish, with the approval of the...

  11. 12 CFR 618.8430 - Internal controls.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 7 2013-01-01 2013-01-01 false Internal controls. 618.8430 Section 618.8430 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM GENERAL PROVISIONS Internal Controls § 618.8430 Internal controls. Each Farm Credit institution's board of directors must adopt an internal...

  12. 12 CFR 618.8430 - Internal controls.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 7 2014-01-01 2014-01-01 false Internal controls. 618.8430 Section 618.8430 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM GENERAL PROVISIONS Internal Controls § 618.8430 Internal controls. Each Farm Credit institution's board of directors must adopt an internal...

  13. Survival of the fittest? The democratization of hospital administration in Quebec.

    PubMed

    Eakin, J M

    1984-01-01

    In 1973 the Canadian Province of Quebec "democratized" its hospital boards of directors by replacing their traditional lay community or religious members with individuals more representative of the hospitals' major interest groups. In the province's English-speaking hospitals, patients, community organizations, physicians and nonprofessional hospital employees elected representatives to boards that were formerly comprised mostly of business executives. After a brief description of the social organization of the former "elite" boards and their role in the distribution of power within hospitals, the paper demonstrates how the "elite" board members and hospital administrators retained control despite "democratization." Several theoretical explanations for this outcome are critically examined in the light of these empirical findings. One suggestion is that the "elite" administration survived democratization because it was "fitter" in terms of ability to influence the hospitals' major economic and political constraints.

  14. Modification of Wood Fiber for Use in Cement Board

    NASA Astrophysics Data System (ADS)

    Han, F. Q.; Tan, X.; Zhao, F. Q.

    2017-12-01

    When ordinary Portland cement is used for wood fiber cement (WFC) board, the setting time is too long, even hard to solidify. Three methods can be used for wood fiber modification, i.e., soaking in water, treated with alkali solution and coated with some substances on the fiber surface. The results show that the proper water-cement ratio of WFC paste is 1:1.3 in the case of wood cement ratio being 1:1. The WFC board from modified wood fiber and cement is better than the control samples, in which the combined treatment, i.e. soaking in hot water and then coating with alkali-BFS-EVA slurry, behaves best. It is proved that ordinary Portland cement can be used to produce WFC board, with the modified wood fiber, which can greatly reduce production costs.

  15. Development of a Production Ready Automated Wire Delivery System

    NASA Technical Reports Server (NTRS)

    1997-01-01

    The current development effort is a Phase 3 research study entitled "A Production Ready Automated Wire Delivery System", contract number NAS8-39933, awarded to Nichols Research Corporation (NRC). The goals of this research study were to production harden the existing Automated Wire Delivery (AWDS) motion and sensor hardware and test the modified AWDS in a range of welding applications. In addition, the prototype AWDS controller would be moved to the VME bus platform by designing, fabricating and testing a single board VME bus AWDS controller. This effort was to provide an AWDS that could transition from the laboratory environment to production operations. The project was performed in two development steps. Step 1 modified and tested an improved MWG. Step 2 developed and tested the AWDS single board VME bus controller. Step 3 installed the Wire Pilot in a Weld Controller with the imbedded VME bus controller.

  16. Embedded Thermal Control for Spacecraft Subsystems Miniaturization

    NASA Technical Reports Server (NTRS)

    Didion, Jeffrey R.

    2014-01-01

    Optimization of spacecraft size, weight and power (SWaP) resources is an explicit technical priority at Goddard Space Flight Center. Embedded Thermal Control Subsystems are a promising technology with many cross cutting NSAA, DoD and commercial applications: 1.) CubeSatSmallSat spacecraft architecture, 2.) high performance computing, 3.) On-board spacecraft electronics, 4.) Power electronics and RF arrays. The Embedded Thermal Control Subsystem technology development efforts focus on component, board and enclosure level devices that will ultimately include intelligent capabilities. The presentation will discuss electric, capillary and hybrid based hardware research and development efforts at Goddard Space Flight Center. The Embedded Thermal Control Subsystem development program consists of interrelated sub-initiatives, e.g., chip component level thermal control devices, self-sensing thermal management, advanced manufactured structures. This presentation includes technical status and progress on each of these investigations. Future sub-initiatives, technical milestones and program goals will be presented.

  17. Trustees "versus" Directors, Whom Do They Serve? Boards, For-Profits and the Public Good in the United States

    ERIC Educational Resources Information Center

    Fox Garrity, Bonnie

    2015-01-01

    Postsecondary education in the United States is provided by public, not-for-profit and for-profit institutions. Public and not-for-profit institutions are expected to serve the public good due to state control or chartering requirements; for-profit institutions are not. Therefore, the decision to serve the public good is vested in the board. The…

  18. Agreement between the Board of Control of Ferris State College and the Ferris College Faculty Association (MEA/NEA), November 12, 1984-June 30, 1987.

    ERIC Educational Resources Information Center

    Michigan Education Association, East Lansing.

    The collective bargaining agreement between the Board of Ferris State College and Ferris Faculty Association Chapter (507 members), an affiliate of the National Education Association and the Michigan Education Association, covering the period November 12, 1984-June 30, 1987 is presented. Items covered in the agreement include: unit recognition,…

  19. 40 CFR 52.2220 - Identification of plan.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... FR 37387 Section 1200-3-18-.22 Bulk Gasoline Plants 12/29/04 08/26/05, 70 FR 50199 Section 1200-3-18... Emergency Powers of Health Officer 8/14/89 6/15/89, 54 FR 25456 Division IIIAir Pollution Control Board... 8/16/95 2/18/97, 62 FR 7163 Section 4-7 Powers and duties of the board; delegation 7/20/89 5/08/90...

  20. 40 CFR 52.2220 - Identification of plan.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... FR 37387 Section 1200-3-18-.22 Bulk Gasoline Plants 12/29/04 08/26/05, 70 FR 50199 Section 1200-3-18... Emergency Powers of Health Officer 8/14/89 6/15/89, 54 FR 25456 Division IIIAir Pollution Control Board... 8/16/95 2/18/97, 62 FR 7163 Section 4-7 Powers and duties of the board; delegation 7/20/89 5/08/90...

  1. Military Retirement Fund Audited Financial Report. Fiscal Year 2012

    DTIC Science & Technology

    2012-11-06

    FY 2012 included: 1) New economic assumptions due to the Federal Accounting Standards Advisory Board (FASAB) financial reporting Statement of...weaknesses were found in the design or operation of the internal control over financial reporting . Improper Payments Information Act of 2002 (Public Law No...accepted in the United States of America, OMB Circular A-136, Financial Reporting Requirements, and the Federal Accounting Standards Advisory Board

  2. Concepts and algorithms for terminal-area traffic management

    NASA Technical Reports Server (NTRS)

    Erzberger, H.; Chapel, J. D.

    1984-01-01

    The nation's air-traffic-control system is the subject of an extensive modernization program, including the planned introduction of advanced automation techniques. This paper gives an overview of a concept for automating terminal-area traffic management. Four-dimensional (4D) guidance techniques, which play an essential role in the automated system, are reviewed. One technique, intended for on-board computer implementation, is based on application of optimal control theory. The second technique is a simplified approach to 4D guidance intended for ground computer implementation. It generates advisory messages to help the controller maintain scheduled landing times of aircraft not equipped with on-board 4D guidance systems. An operational system for the second technique, recently evaluated in a simulation, is also described.

  3. Mold heating and cooling microprocessor conversion. Final report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hoffman, D.P.

    Conversion of the microprocessors and software for the Mold Heating and Cooling (MHAC) pump package control systems was initiated to allow required system enhancements and provide data communications capabilities with the Plastics Information and Control System (PICS). The existing microprocessor-based control systems for the pump packages use an Intel 8088-based microprocessor board with a maximum of 64 Kbytes of program memory. The requirements for the system conversion were developed, and hardware has been selected to allow maximum reuse of existing hardware and software while providing the required additional capabilities and capacity. The new hardware will incorporate an Intel 80286-based microprocessormore » board with an 80287 math coprocessor, the system includes additional memory, I/O, and RS232 communication ports.« less

  4. A low-cost computer-controlled Arduino-based educational laboratory system for teaching the fundamentals of photovoltaic cells

    NASA Astrophysics Data System (ADS)

    Zachariadou, K.; Yiasemides, K.; Trougkakos, N.

    2012-11-01

    We present a low-cost, fully computer-controlled, Arduino-based, educational laboratory (SolarInsight) to be used in undergraduate university courses concerned with electrical engineering and physics. The major goal of the system is to provide students with the necessary instrumentation, software tools and methodology in order to learn fundamental concepts of semiconductor physics by exploring the process of an experimental physics inquiry. The system runs under the Windows operating system and is composed of a data acquisition/control board, a power supply and processing boards, sensing elements, a graphical user interface and data analysis software. The data acquisition/control board is based on the Arduino open source electronics prototyping platform. The graphical user interface and communication with the Arduino are developed in C# and C++ programming languages respectively, by using IDE Microsoft Visual Studio 2010 Professional, which is freely available to students. Finally, the data analysis is performed by using the open source, object-oriented framework ROOT. Currently the system supports five teaching activities, each one corresponding to an independent tab in the user interface. SolarInsight has been partially developed in the context of a diploma thesis conducted within the Technological Educational Institute of Piraeus under the co-supervision of the Physics and Electronic Computer Systems departments’ academic staff.

  5. Pilot study comparing changes in postural control after training using a video game balance board program and 2 standard activity-based balance intervention programs.

    PubMed

    Pluchino, Alessandra; Lee, Sae Yong; Asfour, Shihab; Roos, Bernard A; Signorile, Joseph F

    2012-07-01

    To compare the impacts of Tai Chi, a standard balance exercise program, and a video game balance board program on postural control and perceived falls risk. Randomized controlled trial. Research laboratory. Independent seniors (N=40; 72.5±8.40) began the training, 27 completed. Tai Chi, a standard balance exercise program, and a video game balance board program. The following were used as measures: Timed Up & Go, One-Leg Stance, functional reach, Tinetti Performance Oriented Mobility Assessment, force plate center of pressure (COP) and time to boundary, dynamic posturography (DP), Falls Risk for Older People-Community Setting, and Falls Efficacy Scale. No significant differences were seen between groups for any outcome measures at baseline, nor were significant time or group × time differences for any field test or questionnaire. No group × time differences were seen for any COP measures; however, significant time differences were seen for total COP, 3 of 4 anterior/posterior displacement and both velocity, and 1 displacement and 1 velocity medial/lateral measure across time for the entire sample. For DP, significant improvements in the overall score (dynamic movement analysis score), and in 2 of the 3 linear and angular measures were seen for the sample. The video game balance board program, which can be performed at home, was as effective as Tai Chi and the standard balance exercise program in improving postural control and balance dictated by the force plate postural sway and DP measures. This finding may have implications for exercise adherence because the at-home nature of the intervention eliminates many obstacles to exercise training. Copyright © 2012 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  6. Comparison of localized injections of spinosad and selected insecticides for the control of Cryptotermes brevis (Isoptera: Kalotermitidae) in naturally infested structural mesocosms.

    PubMed

    Woodrow, R Joseph; Grace, J Kenneth; Oshiro, Robert J

    2006-08-01

    We investigated the efficacy of various chemical injections against Cryptotermes brevis (Walker) (Isoptera: Kalotermitidae) in hardwood shipping pallets. We had three principle interests: efficacy in whole structures, relative efficacy of the active ingredients, and whether acoustic evidence augmented treatment site selection. Infested pallets were delineated into boards with four monitoring sites each. Six chemical treatments were compared: chlorpyrifos aerosol, aqueous disodium octaborate tetrahydrate (DOT), resmethrin aerosol, distilled water (control), and two treatments of spinosad SC (one treatment applied based upon visual and the other treatment upon acoustic [AE] evidence). Individual boards were split apart; efficacy was determined by percentage mortality and pre- and posttreatment AE counts. Injections were constrained to a single point per board with the greatest level of termite activity. In whole pallets, mean percentage mortality ranged from 53.3 to 58.7% for the visual and AE spinosad treatments, respectively, whereas water averaged 6.8%. Remaining treatment mortalities were 33.2, 30.4, and 18.1% for chlorpyrifos, DOT, and resmethrin, respectively. Analysis of whole-pallet data indicated that none of the insecticides produced commercially acceptable mortality; localized injections of insecticides were not comparable with whole-structure treatments. We delineated independent groups of board sections (sectional aggregates; SA) that were connected by galleries. When treated SA were analyzed, spinosad and DOT treatments were significantly different from controls, whereas remaining treatments were not different from controls or spinosad and DOT. AE readings and visual termite evidence were compared with presence or absence of termites in SA, and it was determined that both AE and visual evidence were effective predictors of termite presence.

  7. 105. DAMAGE CONTROL CENTRAL STARBOARD LOOKING TO PORT SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    105. DAMAGE CONTROL CENTRAL - STARBOARD LOOKING TO PORT SHOWING PLOTTING BOARD, FLOODING & FIRE ALARM SYSTEMS AND DRAGE GAUGE. - U.S.S. HORNET, Puget Sound Naval Shipyard, Sinclair Inlet, Bremerton, Kitsap County, WA

  8. 29 CFR 793.7 - “Announcer.”

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... time signals, and present other similar routine on-the-air material. In small stations, an announcer may, in addition to these duties, operate the studio control board, give cues to the control room for...

  9. 29 CFR 793.7 - “Announcer.”

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... time signals, and present other similar routine on-the-air material. In small stations, an announcer may, in addition to these duties, operate the studio control board, give cues to the control room for...

  10. 29 CFR 793.7 - “Announcer.”

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... time signals, and present other similar routine on-the-air material. In small stations, an announcer may, in addition to these duties, operate the studio control board, give cues to the control room for...

  11. Smart lighting using a liquid crystal modulator

    NASA Astrophysics Data System (ADS)

    Baril, Alexandre; Thibault, Simon; Galstian, Tigran

    2017-08-01

    Now that LEDs have massively invaded the illumination market, a clear trend has emerged for more efficient and targeted lighting. The project described here is at the leading edge of the trend and aims at developing an evaluation board to test smart lighting applications. This is made possible thanks to a new liquid crystal light modulator recently developed for broadening LED light beams. The modulator is controlled by electrical signals and is characterized by a linear working zone. This feature allows the implementation of a closed loop control with a sensor feedback. This project shows that the use of computer vision is a promising opportunity for cheap closed loop control. The developed evaluation board integrates the liquid crystal modulator, a webcam, a LED light source and all the required electronics to implement a closed loop control with a computer vision algorithm.

  12. 12 CFR 618.8430 - Internal controls.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 12 Banks and Banking 7 2012-01-01 2012-01-01 false Internal controls. 618.8430 Section 618.8430 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM GENERAL PROVISIONS Internal Controls § 618.8430 Internal controls. Each Farm Credit institution's board of directors must adopt an internal control policy, providing adequate direction to...

  13. 20 CFR 202.4 - Control.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 20 Employees' Benefits 1 2011-04-01 2011-04-01 false Control. 202.4 Section 202.4 Employees' Benefits RAILROAD RETIREMENT BOARD REGULATIONS UNDER THE RAILROAD RETIREMENT ACT EMPLOYERS UNDER THE ACT § 202.4 Control. A company or person is controlled by one or more carriers, whenever there exists in one...

  14. 77 FR 46096 - Centers for Disease Control and Prevention

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-02

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of... section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control... Control and Prevention (CDC), and the Director, Office of Public Health Preparedness and Response (OPHPR...

  15. 20 CFR 202.4 - Control.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 20 Employees' Benefits 1 2013-04-01 2012-04-01 true Control. 202.4 Section 202.4 Employees' Benefits RAILROAD RETIREMENT BOARD REGULATIONS UNDER THE RAILROAD RETIREMENT ACT EMPLOYERS UNDER THE ACT § 202.4 Control. A company or person is controlled by one or more carriers, whenever there exists in one...

  16. 20 CFR 202.4 - Control.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 20 Employees' Benefits 1 2012-04-01 2012-04-01 false Control. 202.4 Section 202.4 Employees' Benefits RAILROAD RETIREMENT BOARD REGULATIONS UNDER THE RAILROAD RETIREMENT ACT EMPLOYERS UNDER THE ACT § 202.4 Control. A company or person is controlled by one or more carriers, whenever there exists in one...

  17. 20 CFR 202.4 - Control.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Control. 202.4 Section 202.4 Employees' Benefits RAILROAD RETIREMENT BOARD REGULATIONS UNDER THE RAILROAD RETIREMENT ACT EMPLOYERS UNDER THE ACT § 202.4 Control. A company or person is controlled by one or more carriers, whenever there exists in one...

  18. 20 CFR 202.4 - Control.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 20 Employees' Benefits 1 2014-04-01 2012-04-01 true Control. 202.4 Section 202.4 Employees' Benefits RAILROAD RETIREMENT BOARD REGULATIONS UNDER THE RAILROAD RETIREMENT ACT EMPLOYERS UNDER THE ACT § 202.4 Control. A company or person is controlled by one or more carriers, whenever there exists in one...

  19. Quality Control in Higher Education.

    ERIC Educational Resources Information Center

    Hogarth, Charles P.

    The status of quality control in U.S. higher education is discussed with an overview of the functions and structure of public and private colleges and universities. The book is divided into seven chapters: (1) outside controls (accrediting groups, governmental groups and other groups); (2) structure (board of control, president, organization); (3)…

  20. 76 FR 40660 - Revisions to the California State Implementation Plan, San Joaquin Valley Air Pollution Control...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-11

    ... the California State Implementation Plan, San Joaquin Valley Air Pollution Control District (SJVUAPCD... approve revisions to the San Joaquin Valley Air Pollution Control District (SJVUAPCD) portion of the....0 for the following terms: Air Pollution Control Officer, Board, Environmental Protection Agency...

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top